WorldWideScience

Sample records for treatment technology review

  1. A review of treatment technologies for MTBE

    International Nuclear Information System (INIS)

    Bass, D.

    1995-01-01

    Available treatment technologies for methyl tertiary butyl ether (MTBE) contamination in soil, groundwater, and recovered groundwater are reviewed and assessed. MTBE contamination is becoming an important issue due to the increasing prevalence and regulation of this gasoline additive. In addition, MTBE is more soluble and more mobile in groundwater than most hydrocarbons, so it is usually the first gasoline constituent to reach sensitive receptors. Treatment of MTBE is complicated by its Henry's constant, which is lower than most other gasoline constituents. Furthermore, evidence of biodegradability of MTBE is mixed, and MTBE does not degrade rapidly abiotically. Groundwater pumping is usually employed to contain and collect MTBE-contaminated groundwater, often successfully because of its high aqueous solubility. Air sparging/soil vapor extraction is also successfully employed to treat MTBE, but its effectiveness is reduced by the low Henry's constant of MTBE. Sparging and other aerobic bioremediation approaches are hampered by the poor biodegradability of MTBE. Oxidation technologies, such as ozone injection, hold promise for rapid in situ remediation of MTBE. Treatment of recovered groundwater contaminated with MTBE is also problematic. MTBE adsorbs poorly to granular activated carbon; advanced oxidation processes are effective on MTBE, but entail high capital and operating costs; bioreactors are of questionable effectiveness on MTBE. Air stripping is usually the most cost-effective treatment technology for MTBE so long as the off gas from the air stripper can be discharged without treatment. However, off gas treatment is expensive, so groundwater is sometimes heated to reduce the requirement for stripping air

  2. Novel technologies for reverse osmosis concentrate treatment: a review.

    Science.gov (United States)

    Joo, Sung Hee; Tansel, Berrin

    2015-03-01

    Global water shortages due to droughts and population growth have created increasing interest in water reuse and recycling and, concomitantly, development of effective water treatment processes. Pressured membrane processes, in particular reverse osmosis, have been adopted in water treatment industries and utilities despite the relatively high operational cost and energy consumption. However, emerging contaminants are present in reverse osmosis concentrate in higher concentrations than in the feed water, and have created challenges for treatment of the concentrate. Further, standards and guidelines for assessment and treatment of newly identified contaminants are currently lacking. Research is needed regarding the treatment and disposal of emerging contaminants of concern in reverse osmosis concentrate, in order to develop cost-effective methods for minimizing potential impacts on public health and the environment. This paper reviews treatment options for concentrate from membrane processes. Barriers to emerging treatment options are discussed and novel treatment processes are evaluated based on a literature review. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Emerging desalination technologies for water treatment: a critical review.

    Science.gov (United States)

    Subramani, Arun; Jacangelo, Joseph G

    2015-05-15

    In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Novel treatment technologies for PFAS compounds: A critical review.

    Science.gov (United States)

    Kucharzyk, Katarzyna H; Darlington, Ramona; Benotti, Mark; Deeb, Rula; Hawley, Elisabeth

    2017-12-15

    Perfluorinated compounds such as perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) have recently drawn great attention due to their wide distribution in aquatic environments. The understanding of the physicochemical properties and fate and transport of PFAs in groundwater is still limited. Preliminary studies indicate that these compounds can readily bioaccumulate and pose human and animal health concerns. Due to their physicochemical properties, PFOS and PFOA are water soluble, nonvolatile and persistent in the environment, which is a cause of concern related to their treatment with conventional remediation technologies. Extraction with inefficient carbon adsorption is one of the most common treatment technologies for remediation of PFOS- or PFOA-impacted groundwater. Several other innovative and promising technologies, including sonochemistry, bioremediation and photolysis, have been tested for their effectiveness in removal of perfluorinated compounds. This paper provides a baseline for understanding research needs to better develop treatment technologies for PFOA and PFOS in groundwater. Frontiers for improving the state of practice for PFOA and PFOS treatment include the development of more cost-effective ex situ treatment methods and the development and demonstration of promising in situ treatment technologies at the pilot and full scale. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Seizure reporting technologies for epilepsy treatment: A review of clinical information needs and supporting technologies.

    Science.gov (United States)

    Bidwell, Jonathan; Khuwatsamrit, Thanin; Askew, Brittain; Ehrenberg, Joshua Andrew; Helmers, Sandra

    2015-11-01

    This review surveys current seizure detection and classification technologies as they relate to aiding clinical decision-making during epilepsy treatment. Interviews and data collected from neurologists and a literature review highlighted a strong need for better distinguishing between patients exhibiting generalized and partial seizure types as well as achieving more accurate seizure counts. This information is critical for enabling neurologists to select the correct class of antiepileptic drugs (AED) for their patients and evaluating AED efficiency during long-term treatment. In our questionnaire, 100% of neurologists reported they would like to have video from patients prior to selecting an AED during an initial consultation. Presently, only 30% have access to video. In our technology review we identified that only a subset of available technologies surpassed patient self-reporting performance due to high false positive rates. Inertial seizure detection devices coupled with video capture for recording seizures at night could stand to address collecting seizure counts that are more accurate than current patient self-reporting during day and night time use. Copyright © 2015. Published by Elsevier Ltd.

  6. REVIEW OF EXISTING LCA STUDIES ON WASTE WATER TREATMENT TECHNOLOGIES

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hauschild, Michael Zwicky

    The EU research project “NEPTUNE” is related to the EU Water Framework Directive and focused on the development of new waste water treatment technologies (WWTT) for municipal waste water. The sustainability of these WWTTs is going to be assessed by the use of life cycle assessment (LCA). New life...... importance of the different life cycle stages and the individual impact categories in the total impact from the waste water treatment, and the degree to which micropollutants, pathogens and whole effluent toxicity have been included in earlier studies. The results show that more than 30 different WWTT (and...

  7. Technological advances in the treatment of trauma: a review of promising practices.

    Science.gov (United States)

    Paul, Lisa A; Hassija, Christina M; Clapp, Joshua D

    2012-11-01

    Given the availability of empirically supported practices for addressing posttraumatic stress disorder and other forms of trauma-related distress, the development and implementation of new technology to deliver these treatments is exciting. Technological innovations in this literature aim to expand availability of empirically based intervention, increase treatment adherence and acceptability, and overcome barriers commonly encountered with conventional trauma-focused treatment. Much of the current research on these technological developments consists of brief reviews and case studies of the separate therapy modalities. Although this work serves to document the appeal and utility of these innovations, it does not provide comprehensive information about the host of options available. To that end, the three general categories of technological advances in trauma therapy (i.e., videoconferencing, e-Health, virtual reality) are reviewed here, including information regarding their empirical support and suggestions for future research and clinical practice.

  8. Process water treatment in Canada's oil sands industry : 2 : a review of emerging technologies

    International Nuclear Information System (INIS)

    Allen, E.W.

    2008-01-01

    This review was conducted to identify candidate treatment technologies for treating oil sands process water. The oil sands industry in Canada uses large volumes of fresh water in order to extract bitumen deposits. The development of process water treatment technologies has become a critical issue for the industry, particularly as oil sand production is expected to triple in the next decade. However, treatment technologies must be adapted to consider the fouling potential of bitumens and fine clays as well as the effect of alkaline process water on treatment performance. The review included developments in chemical modifications to membranes and adsorbents designed to improve pollutant removal and reduce fouling; hybridization technologies designed to enhance the biological treatment of toxic feedwaters; recent advances in photocatalytic oxidation technologies for organic compounds; and new designs for large-scale treatment wetlands for polluted waste waters. It was concluded that major knowledge gaps must be optimized and preliminary studies must be conducted in order to understand how the treatment technologies will be affected by the chemical and physical characteristics of oil sands process water. 188 refs., 8 tabs

  9. Optimising treatment resources for OCD: a review of the evidence base for technology-enhanced delivery.

    Science.gov (United States)

    Lovell, Karina; Bee, Penny

    2011-12-01

    Obsessive-compulsive disorder (OCD) is a chronic and disabling mental health problem. Only a minority of people receive evidence-based psychological treatments, and this deficit has prompted an increasing focus on delivering cognitive behaviour therapy (CBT) in new and innovative ways. To conduct a scoping review of the published evidence base for CBT-based interventions incorporating a health technology in the treatment of OCD. The questions posed by the review were (a) are technology-assisted treatments clinically effective, (b) are patient outcomes durable and (c) are more innovative services deemed acceptable by those individuals who engage in them? Scoping review of published studies using any study design examining CBT interventions incorporating a health technology for OCD. Electronic databases searched included MEDLINE (1966-2010), PsycInfo (1967-2010), EMBASE (1980-2010) and CINAHL databases (1982-2010). Thirteen studies were identified, of these, five used bibliotherapy, five examined computerised CBT (cCBT), two investigated telephone delivered CBT and one evaluated video conferencing. Overall studies were small and methodologically flawed, which precludes definitive conclusions of clinical effectiveness, durability or stakeholder satisfaction. To date the evidence base for technology-enhanced OCD treatments has undergone limited development. Future research should seek to overcome the methodological shortcomings of published work by conducting large-scale trials that incorporate clinical, cost and acceptability outcomes.

  10. Use of plasma arc technology for treatment of solid radioactive waste and review

    International Nuclear Information System (INIS)

    Kostov, E.; Bataklieva, T.

    2011-01-01

    The thermal treatment of low and intermediate level radioactive wastes by arc technology is an advanced and promising process. Therefore, this technology is becoming an important part of the waste management systems of new and existing nuclear power plants. However, due to the small number of existing facilities worldwide, limited operating experience and the ongoing need for research and development activities in this area, the reliability of the technology and the economical benefits are not well understood. Therefore, the goal of this report is to provide a basic understanding of the arc discharge technology for low and intermediate level radioactive waste destruction and to review the end product characteristics and the advancements in their improvement. In addition the information in this paper can be used as base for developing of technical, operational and economical criteria for technology selection methodology. (authors)

  11. Thermal Treatment of Hydrocarbon-Impacted Soils: A Review of Technology Innovation for Sustainable Remediation

    Directory of Open Access Journals (Sweden)

    Julia E. Vidonish

    2016-12-01

    Full Text Available Thermal treatment technologies hold an important niche in the remediation of hydrocarbon-contaminated soils and sediments due to their ability to quickly and reliably meet cleanup standards. However, sustained high temperature can be energy intensive and can damage soil properties. Despite the broad applicability and prevalence of thermal remediation, little work has been done to improve the environmental compatibility and sustainability of these technologies. We review several common thermal treatment technologies for hydrocarbon-contaminated soils, assess their potential environmental impacts, and propose frameworks for sustainable and low-impact deployment based on a holistic consideration of energy and water requirements, ecosystem ecology, and soil science. There is no universally appropriate thermal treatment technology. Rather, the appropriate choice depends on the contamination scenario (including the type of hydrocarbons present and on site-specific considerations such as soil properties, water availability, and the heat sensitivity of contaminated soils. Overall, the convergence of treatment process engineering with soil science, ecosystem ecology, and plant biology research is essential to fill critical knowledge gaps and improve both the removal efficiency and sustainability of thermal technologies.

  12. New and emerging technologies for the treatment of inherited retinal diseases: a horizon scanning review.

    Science.gov (United States)

    Smith, J; Ward, D; Michaelides, M; Moore, A T; Simpson, S

    2015-09-01

    The horizon scanning review aimed to identify new and emerging technologies in development that have the potential to slow or stop disease progression and/or reverse sight loss in people with inherited retinal diseases (IRDs). Potential treatments were identified using recognized horizon scanning methods. These included a combination of online searches using predetermined search terms, suggestions from clinical experts and patient and carer focus groups, and contact with commercial developers. Twenty-nine relevant technologies were identified. These included 9 gene therapeutic approaches, 10 medical devices, 5 pharmacological agents, and 5 regenerative and cell therapies. A further 11 technologies were identified in very early phases of development (typically phase I or pre-clinical) and were included in the final report to give a complete picture of developments 'on the horizon'. Clinical experts and patient and carer focus groups provided helpful information and insights, such as the availability of specialised services for patients, the potential impacts of individual technologies on people with IRDs and their families, and helped to identify additional relevant technologies. This engagement ensured that important areas of innovation were not missed. Most of the health technologies identified are still at an early stage of development and it is difficult to estimate when treatments might be available. Further, well designed trials that generate data on efficacy, applicability, acceptability, and costs of the technologies, as well as the long-term impacts for various conditions are required before these can be considered for adoption into routine clinical practice.

  13. Quantifying nitrous oxide production pathways in wastewater treatment systems using isotope technology - A critical review.

    Science.gov (United States)

    Duan, Haoran; Ye, Liu; Erler, Dirk; Ni, Bing-Jie; Yuan, Zhiguo

    2017-10-01

    Nitrous oxide (N 2 O) is an important greenhouse gas and an ozone-depleting substance which can be emitted from wastewater treatment systems (WWTS) causing significant environmental impacts. Understanding the N 2 O production pathways and their contribution to total emissions is the key to effective mitigation. Isotope technology is a promising method that has been applied to WWTS for quantifying the N 2 O production pathways. Within the scope of WWTS, this article reviews the current status of different isotope approaches, including both natural abundance and labelled isotope approaches, to N 2 O production pathways quantification. It identifies the limitations and potential problems with these approaches, as well as improvement opportunities. We conclude that, while the capabilities of isotope technology have been largely recognized, the quantification of N 2 O production pathways with isotope technology in WWTS require further improvement, particularly in relation to its accuracy and reliability. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. State of the art and review on the treatment technologies of water reverse osmosis concentrates.

    Science.gov (United States)

    Pérez-González, A; Urtiaga, A M; Ibáñez, R; Ortiz, I

    2012-02-01

    The growing demand for fresh water is partially satisfied by desalination plants that increasingly use membrane technologies and among them reverse osmosis to produce purified water. Operating with water recoveries from 35% to 85% RO plants generate huge volumes of concentrates containing all the retained compounds that are commonly discharged to water bodies and constitute a potentially serious threat to marine ecosystems; therefore there is an urgent need for environmentally friendly management options of RO brines. This paper gives an overview on the potential treatments to overcome the environmental problems associated to the direct discharge of RO concentrates. The treatment options have been classified according to the source of RO concentrates and the maturity of the technologies. For the sake of clarity three different sources of RO concentrates are differentiated i) desalination plants, ii) tertiary processes in WWTP, and iii) mining industries. Starting with traditional treatments such as evaporation and crystallization other technologies that have emerged in last years to reduce the volume of the concentrate before disposal and with the objective of achieving zero liquid discharge and recovery of valuable compounds from these effluents are also reviewed. Most of these emerging technologies have been developed at laboratory or pilot plant scale (see Table 1). With regard to RO concentrates from WWTP, the manuscript addresses recent studies that are mainly focused on reducing the organic pollutant load through the application of innovative advanced oxidation technologies. Finally, works that report the treatment of RO concentrates from industrial sources are analyzed as well. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. Effectiveness of technologies in the treatment of post-stroke anomia: A systematic review

    Directory of Open Access Journals (Sweden)

    Monica Lavoie

    2015-04-01

    Procedures and analyses: The PRISMA statement(1 for reporting systematic reviews and meta-analyses of studies that evaluate health care interventions was used as a guideline to conduct the present review. A systematic search of publications on PubMed and PsycInfo was conducted. Experimental studies designed to assess the effectiveness of an intervention delivered by a technology, namely computer, smart tablet or teletreatment, to specifically improve anomia in post-stroke participants were selected, without limitations as to the dates of publication. The main outcomes studied were improvement in naming skills and generalization to untreated items and daily communication. The Downs and Black checklist for randomised and non-randomised studies of health care interventions(2 was used by two reviewers (ML and JM to conduct the methodological quality assessment. Results: A total of 20 studies were included in this review. Up to now, computer is by far the most popular technology, whereas only a few studies aimed at exploring the effectiveness of smart tablet or teletreatment. In some studies, technology was used as a therapy tool in a clinical setting, in the presence of the clinician, while in others, therapy with technology was self-administered at home, without the clinician. All studies confirmed the effectiveness of therapy provided by technology to improve naming of trained items. However, generalization to untrained items is unclear and assessment of generalization to daily communication is scarce. Conclusions: The results of this systematic review confirm that technology is a promising avenue in the management of post-stroke anomia. Self-administered therapies are particularly interesting since they allow increasing significantly the intensity and frequency of therapeutic activities, a factor that has been explicitly recognized as a positive determinant of the efficacy of language treatment(3. In future studies, ecological tasks aiming to evaluate therapy

  16. Aqueous mercury treatment technology review for NPDES Outfall 49 Y-12 Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lanning, J.M.

    1993-04-01

    During 1950 to 1955, Building 9201-2 at the Oak Ridge Y-12 Plant was used to house development facilities for processes that employed elemental mercury to separate lithium isotopes as part of the thermonuclear weapons production operations. As a result of several spills, this building area and several other areas associated with the separation process were contaminated with mercury and became a source of continuing contamination of the Y-12 Plant discharge water to East Fork Poplar Creek (EFPC). Mercury concentrations in the outfalls south of Building 9201-2 have ranged up to 80 ppb, with the highest concentrations being experienced at Outfall 49. As a result, this outfall was chosen as a test site for future mercury treatment technology evaluation and development at the Oak Ridge Y-12 Plant. A literature review and vendor survey has identified several promising materials and technologies that may be applicable to mercury removal at the Outfall 49 site. This document summarizes those findings.

  17. Current technologies for biological treatment of textile wastewater--a review.

    Science.gov (United States)

    Sarayu, K; Sandhya, S

    2012-06-01

    The release of colored wastewater represents a serious environmental problem and public health concern. Color removal from textile wastewater has become a big challenge over the last decades, and up to now, there is no single and economically attractive treatment method that can effectively decolorize the wastewater. Effluents from textile manufacturing, dyeing, and finishing processes contain high concentrations of biologically difficult-to-degrade or even inert auxiliaries, chemicals like acids, waxes, fats, salts, binders, thickeners, urea, surfactants, reducing agents, etc. The various chemicals such as biocides and stain repellents used for brightening, sequestering, anticreasing, sizing, softening, and wetting of the yarn or fabric are also present in wastewater. Therefore, the textile wastewater needs environmental friendly, effective treatment process. This paper provides a critical review on the current technology available for decolorization and degradation of textile wastewater and also suggests effective and economically attractive alternatives.

  18. Anaerobic digestion technology in livestock manure treatment for biogas production: a review

    Energy Technology Data Exchange (ETDEWEB)

    Nasir, Ismail M. [Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, Selangor (Malaysia); Mohd Ghazi, Tinia I.; Omar, Rozita

    2012-06-15

    This article reviews the potential of anaerobic digestion (AD) for biogas production from livestock manure wastes and compares the operating and performance data for various anaerobic process configurations. It examines different kinds of manure waste treatment techniques and the influence of several parameters on biogas and methane yield. The comparison indicates that a variety of different operational conditions, various reactor configurations such as batch reactors, continuously stirred tank reactor (CSTR), plug flow reactor (PFR), up-flow anaerobic sludge blanket (UASB), anaerobic sequencing batch reactor (ASBR), temperature phased anaerobic digestion (TPAD), and continuous one- and two-stage systems, present a suitable technology for the AD of livestock manure waste. Main performance indicators are biogas and methane yield, degradation of volatile solids (VS), higher loading, and process stability with a short retention time. (copyright 2012 WILEY-VCH Verlag GmbH 8 Co. KGaA, Weinheim)

  19. Energy and technology review

    International Nuclear Information System (INIS)

    Quirk, W.J.; Bookless, W.A.

    1994-05-01

    The Lawrence Livermore National Laboratory, operated by the University of California for the United States Department of Energy, was established in 1952 to do research on nuclear weapons and magnetic fusion energy. Since then, in response to new national needs, we have added other major programs, including technology transfer, laser science (fusion, isotope separation, materials processing), biology and biotechnology, environmental research and remediation, arms control and nonproliferation, advanced defense technology, and applied energy technology. These programs, in turn, require research in basic scientific disciplines, including chemistry and materials science, computing science and technology, engineering, and physics. The Laboratory also carries out a variety of projects for other federal agencies. Energy and Technology Review is published monthly to report on unclassified work in all our programs. This issue reviews work performed in the areas of modified retoring for waste treatment and underground stripping to remove contamination

  20. Integration of Mobile Health Technology in the Treatment of Chronic Pain: A Critical Review.

    Science.gov (United States)

    Sundararaman, Lalitha V; Edwards, Robert R; Ross, Edgar L; Jamison, Robert N

    This article provides a critical overview and best-evidence synthesis of the use of mobile health (mHealth) technology among persons with chronic pain and their health care providers and examines the future benefits and barriers of implementing mHealth technology in clinical care. We critically review articles about electronic pain diaries, pain assessment programs, text messaging, and smartphone pain apps for management of persons with pain. Also presented are findings on the utility of activity trackers and use of telehealth to deliver cognitive behavioral therapy. Finally, barriers, study gaps, and future challenges of incorporating mobile technology for chronic pain are discussed. Although the future of mHealth technology and telemedicine in clinical practice is promising, this critical review highlights the need for rigorous studies to establish an association of the use of mHealth technology with improved quality of life, functional autonomy, and decreased hospital use.

  1. Technological Advances in the Treatment of Trauma: A Review of Promising Practices

    Science.gov (United States)

    Paul, Lisa A.; Hassija, Christina M.; Clapp, Joshua D.

    2012-01-01

    Given the availability of empirically supported practices for addressing posttraumatic stress disorder and other forms of trauma-related distress, the development and implementation of new technology to deliver these treatments is exciting. Technological innovations in this literature aim to expand availability of empirically based intervention,…

  2. A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO2

    International Nuclear Information System (INIS)

    Fernandez Bertos, M.; Simons, S.J.R.; Hills, C.D.; Carey, P.J.

    2004-01-01

    Moist calcium silicate minerals are known to readily react with carbon dioxide (CO 2 ). The reaction products can cause rapid hardening and result in the production of monolithic materials. Today, accelerated carbonation is a developing technology, which may have potential for the treatment of wastes and contaminated soils and for the sequestration of CO 2 , an important greenhouse gas. This paper reviews recent developments in this emerging technology and provides information on the parameters that control the process. The effects of the accelerated carbonation reaction on the solid phase are discussed and future potential applications of this technology are also considered

  3. Chemical and biological treatment technologies for leather tannery chemicals and wastewaters: a review.

    Science.gov (United States)

    Lofrano, Giusy; Meriç, Sureyya; Zengin, Gülsüm Emel; Orhon, Derin

    2013-09-01

    Although the leather tanning industry is known to be one of the leading economic sectors in many countries, there has been an increasing environmental concern regarding the release of various recalcitrant pollutants in tannery wastewater. It has been shown that biological processes are presently known as the most environmental friendly but inefficient for removal of recalcitrant organics and micro-pollutants in tannery wastewater. Hence emerging technologies such as advanced oxidation processes and membrane processes have been attempted as integrative to biological treatment for this sense. This paper, as the-state-of-the-art, attempts to revise the over world trends of treatment technologies and advances for pollution prevention from tannery chemicals and wastewater. It can be elucidated that according to less extent advances in wastewater minimization as well as in leather production technology and chemicals substitution, biological and chemical treatment processes have been progressively studied. However, there has not been a full scale application yet of those emerging technologies using advanced oxidation although some of them proved good achievements to remove xenobiotics present in tannery wastewater. It can be noted that advanced oxidation technologies integrated with biological processes will remain in the agenda of the decision makers and water sector to apply the best prevention solution for the future tanneries. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. Tail gas treatment of SEWGS technology. Literature review on CO2 and H2S separation

    Energy Technology Data Exchange (ETDEWEB)

    Fabbri, E.N.; Van Dijk, H.A.J. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

    2011-12-15

    This literature review is the result of an investigation of the most important way to remove sulphur for the last decades. We will discuss Claus and Claus tail gas process options to solve the problem. Next to solutions which come from membranes, direct oxidation catalysis, from acid gas removal technology, sorbent technology, and liquid oxidation. Each field will be described and explained to understand in which way it could be suitable to separate CO2 and H2S and reach our goals with regard to CO2 transport and storage conditions. Finally, the target of this work will be to propose some interesting and promising solutions in view of future experiments.

  5. Effluent Treatment Technologies in the Iron and Steel Industry - A State of the Art Review.

    Science.gov (United States)

    Das, Pallabi; Mondal, Gautam C; Singh, Siddharth; Singh, Abhay K; Prasad, Bably; Singh, Krishna K

    2018-05-01

      Iron and steel industry is the principal driving force propelling economic and technological growth of a nation. However, since its inception this industry is associated with widespread environmental pollution and enormous water consumption. Different units of a steel plant discharge effluents loaded with toxic, hazardous pollutants, and unutilized components which necessitates mitigation. In this paper, pollutant removal efficiency, effluent volume product quality, and economic feasibility of existing treatments are studied vis-à-vis their merits, demerits, and innovations to access their shortcomings which can be overcome with new technology to identify future research directions. While conventional methods are inadequate for complete remediation and water reclamation, the potential of advanced treatments, like membrane separation, remains relatively untapped. It is concluded that integrated systems combining membrane separation with chemical treatments can guarantee a high degree of contaminant removal, reusability of effluents concurrently leading to process intensification ensuring ecofriendliness and commercial viability.

  6. A Database for Reviewing and Selecting Radioactive Waste Treatment Technologies and Vendors

    International Nuclear Information System (INIS)

    P. C. Marushia; W. E. Schwinkendorf

    1999-01-01

    Several attempts have been made in past years to collate and present waste management technologies and solutions to waste generators. These efforts have been manifested as reports, buyers' guides, and databases. While this information is helpful at the time it is assembled, the principal weakness is maintaining the timeliness and accuracy of the information over time. In many cases, updates have to be published or developed as soon as the product is disseminated. The recently developed National Low-Level Waste Management Program's Technologies Database is a vendor-updated Internet based database designed to overcome this problem. The National Low-Level Waste Management Program's Technologies Database contains information about waste types, treatment technologies, and vendor information. Information is presented about waste types, typical treatments, and the vendors who provide those treatment methods. The vendors who provide services update their own contact information, their treatment processes, and the types of wastes for which their treatment process is applicable. This information is queriable by a generator of low-level or mixed low-level radioactive waste who is seeking information on waste treatment methods and the vendors who provide them. Timeliness of the information in the database is assured using time clocks and automated messaging to remind featured vendors to keep their information current. Failure to keep the entries current results in a vendor being warned and then ultimately dropped from the database. This assures that the user is dealing with the most current information available and the vendors who are active in reaching and serving their market

  7. A review on the use of membrane technology and fouling control for olive mill wastewater treatment.

    Science.gov (United States)

    Pulido, Javier Miguel Ochando

    2016-09-01

    Olive mill effluents (OME) by-produced have significantly increased in the last decades as a result of the boost of the olive oil agro-industrial sector and due to the conversion into continuous operation centrifugation technologies. In these effluents, the presence of phytotoxic recalcitrant pollutants makes them resistant to biological degradation and thus inhibits the efficiency of biological and conventional processes. Many reclamation treatments as well as integrated processes for OME have already been proposed and developed but not led to completely satisfactory and cost-effective results. Olive oil industries in its current status, typically small mills dispersed, cannot afford such high treatment costs. Furthermore, conventional treatments are not able to abate the significant dissolved monovalent and divalent ions concentration present in OME. Within this framework, membrane technology offers high efficiency and moderate investment and maintenance expenses. Wastewater treatment by membrane technologies is growing in the recent years. This trend is owed to the fact of the availability of new membrane materials, membrane designs, membrane module concepts and general know-how, which have promoted credibility among investors. However, fouling reduces the membrane performances in time and leads to premature substitution of the membrane modules, and this is a problem of cost efficiency since wastewater treatment must imply low operating costs. Appropriate fouling inhibition methods should assure this result, thus making membrane processes for wastewater stream treatment both technically and economically feasible. In this paper, the treatment of the effluents by-produced in olive mills, generally called olive mill wastewaters, will be addressed. Within this context, the state of the art of the different pretreatments and integral membrane processes proposed up to today will be gathered and discussed, with an insight in the problem of fouling. Copyright © 2015

  8. A review on hydrothermal pre-treatment technologies and environmental profiles of algal biomass processing.

    Science.gov (United States)

    Patel, Bhavish; Guo, Miao; Izadpanah, Arash; Shah, Nilay; Hellgardt, Klaus

    2016-01-01

    The need for efficient and clean biomass conversion technologies has propelled Hydrothermal (HT) processing as a promising treatment option for biofuel production. This manuscript discussed its application for pre-treatment of microalgae biomass to solid (biochar), liquid (biocrude and biodiesel) and gaseous (hydrogen and methane) products via Hydrothermal Carbonisation (HTC), Hydrothermal Liquefaction (HTL) and Supercritical Water Gasification (SCWG) as well as the utility of HT water as an extraction medium and HT Hydrotreatment (HDT) of algal biocrude. In addition, the Solar Energy Retained in Fuel (SERF) using HT technologies is calculated and compared with benchmark biofuel. Lastly, the Life Cycle Assessment (LCA) discusses the limitation of the current state of art as well as introduction to new potential input categories to obtain a detailed environmental profile. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Review of the technological approaches for grey water treatment and reuses.

    Science.gov (United States)

    Li, Fangyue; Wichmann, Knut; Otterpohl, Ralf

    2009-05-15

    Based on literature review, a non-potable urban grey water reuse standard is proposed and the treatment alternatives and reuse scheme for grey water reuses are evaluated according to grey water characteristics and the proposed standard. The literature review shows that all types of grey water have good biodegradability. The bathroom and the laundry grey water are deficient in both nitrogen and phosphors. The kitchen grey water has a balanced COD: N: P ratio. The review also reveals that physical processes alone are not sufficient to guarantee an adequate reduction of the organics, nutrients and surfactants. The chemical processes can efficiently remove the suspended solids, organic materials and surfactants in the low strength grey water. The combination of aerobic biological process with physical filtration and disinfection is considered to be the most economical and feasible solution for grey water recycling. The MBR appears to be a very attractive solution in collective urban residential buildings.

  10. Realising the technological promise of smartphones in addiction research and treatment: An ethical review.

    Science.gov (United States)

    Capon, Hannah; Hall, Wayne; Fry, Craig; Carter, Adrian

    2016-10-01

    Smartphone technologies and mHealth applications (or apps) promise unprecedented scope for data collection, treatment intervention, and relapse prevention when used in the field of substance abuse and addiction. This potential also raises new ethical challenges that researchers, clinicians, and software developers must address. This paper aims to identify ethical issues in the current uses of smartphones in addiction research and treatment. A search of three databases (PubMed, Web of Science and PsycInfo) identified 33 studies involving smartphones or mHealth applications for use in the research and treatment of substance abuse and addiction. A content analysis was conducted to identify how smartphones are being used in these fields and to highlight the ethical issues raised by these studies. Smartphones are being used to collect large amounts of sensitive information, including personal information, geo-location, physiological activity, self-reports of mood and cravings, and the consumption of illicit drugs, alcohol and nicotine. Given that detailed information is being collected about potentially illegal behaviour, we identified the following ethical considerations: protecting user privacy, maximising equity in access, ensuring informed consent, providing participants with adequate clinical resources, communicating clinically relevant results to individuals, and the urgent need to demonstrate evidence of safety and efficacy of the technologies. mHealth technology offers the possibility to collect large amounts of valuable personal information that may enhance research and treatment of substance abuse and addiction. To realise this potential researchers, clinicians and app-developers must address these ethical concerns to maximise the benefits and minimise risks of harm to users. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Conventional methods and emerging wastewater polishing technologies for palm oil mill effluent treatment: a review.

    Science.gov (United States)

    Liew, Wai Loan; Kassim, Mohd Azraai; Muda, Khalida; Loh, Soh Kheang; Affam, Augustine Chioma

    2015-02-01

    The Malaysian palm oil industry is a major revenue earner and the country is ranked as one of the largest producers in the world. However, growth of the industry is synonymous with a massive production of agro-industrial wastewater. As an environmental protection and public health concern, the highly polluting palm oil mill effluent (POME) has become a major attention-grabber. Hence, the industry is targeting for POME pollution abatement in order to promote a greener image of palm oil and to achieve sustainability. At present, most palm oil mills have adopted the ponding system for treatment. Due to the successful POME pollution abatement experiences, Malaysia is currently planning to revise the effluent quality standards towards a more stringent discharge limits. Hence, the current trend of POME research focuses on developing tertiary treatment or polishing systems for better effluent management. Biotechnologically-advanced POME tertiary (polishing) technologies as well as other physicochemical methods are gaining much attention as these processes are the key players to push the industry towards the goal of environmental sustainability. There are still ongoing treatment technologies being researched and the outcomes maybe available in a while. However, the research completed so far are compiled herein and reported for the first time to acquire a better perspective and insight on the subject with a view of meeting the new standards. To this end, the most feasible technology could be the combination of advanced biological processes (bioreactor systems) with extended aeration, followed by solids separation prior to discharge. Chemical dosing is favoured only if effluent of higher quality is anticipated. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Endovascular Treatment of Various Aortic Pathologies: Review of the Latest Data and Technologies.

    Science.gov (United States)

    Maeda, Koji; Ohki, Takao; Kanaoka, Yuji

    2018-06-01

    The technologies and innovations applicable to endovascular treatment for complex aortic pathologies have progressed rapidly over the last two decades. Although the initial outcomes of an endovascular aortic repair have been excellent, as long-term data became available, complications including endoleaks, endograft migration, and endograft infection have become apparent and are of concern. Previously, the indication for endovascular therapy was restricted to descending thoracic aortic aneurysms and abdominal aortic aneurysms. However, its indication has expanded along with the improvement of techniques and devices, and currently, it has become possible to treat pararenal aortic aneurysms and Crawford type 4 thoracoabdominal aortic aneurysm (TAAA) using the off-the-shelf devices. Additionally, custom-made devices allow for the treatment of arch or more extensive TAAAs. Endovascular treatment is applied not only to aneurysms but also to acute/chronic dissections. However, long-term outcomes are still unclear. This article provides an overview of available devices and the results of endovascular treatment for various aortic pathologies.

  13. A review of the technological solutions for the treatment of oily sludges from petroleum refineries.

    Science.gov (United States)

    da Silva, Leonardo Jordão; Alves, Flávia Chaves; de França, Francisca Pessôa

    2012-10-01

    The activities of the oil industry have several impacts on the environment due to the large amounts of oily wastes that are generated. The oily sludges are a semi-solid material composed by a mixture of clay, silica and iron oxides contaminated with oil, produced water and the chemicals used in the production of oil. Nowadays both the treatment and management of these waste materials is essential to promote sustainable management of exploration and exploitation of natural resources. Biological, physical and chemical processes can be used to reduce environmental contamination by petroleum hydrocarbons to acceptable levels. The choice of treatment method depends on the physical and chemical properties of the waste as well as the availability of facilities to process these wastes. Literature provides some operations for treatment of oily sludges, such as landfilling, incineration, co-processing in clinkerization furnaces, microwave liquefaction, centrifugation, destructive distillation, thermal plasma, low-temperature conversion, incorporation in ceramic materials, development of impermeable materials, encapsulation and biodegradation in land farming, biopiles and bioreactors. The management of the technology to be applied for the treatment of oily wastes is essential to promote proper environmental management, and provide alternative methods to reduce, reuse and recycle the wastes.

  14. A review on bisphenol A occurrences, health effects and treatment process via membrane technology for drinking water.

    Science.gov (United States)

    Muhamad, Mimi Suliza; Salim, Mohd Razman; Lau, Woei Jye; Yusop, Zulkifli

    2016-06-01

    Massive utilization of bisphenol A (BPA) in the industrial production of polycarbonate plastics has led to the occurrence of this compound (at μg/L to ng/L level) in the water treatment plant. Nowadays, the presence of BPA in drinking water sources is a major concern among society because BPA is one of the endocrine disruption compounds (EDCs) that can cause hazard to human health even at extremely low concentration level. Parallel to these issues, membrane technology has emerged as the most feasible treatment process to eliminate this recalcitrant contaminant via physical separation mechanism. This paper reviews the occurrences and effects of BPA toward living organisms as well as the application of membrane technology for their removal in water treatment plant. The potential applications of using polymeric membranes for BPA removal are also discussed. Literature revealed that modifying membrane surface using blending approach is the simple yet effective method to improve membrane properties with respect to BPA removal without compromising water permeability. The regeneration process helps in maintaining the performances of membrane at desired level. The application of large-scale membrane process in treatment plant shows the feasibility of the technology for removing BPA and possible future prospect in water treatment process.

  15. A review of technologies and performances of thermal treatment systems for energy recovery from waste

    Energy Technology Data Exchange (ETDEWEB)

    Lombardi, Lidia, E-mail: lidia.lombardi@unicusano.it [Niccolò Cusano University, via Don Carlo Gnocchi, 3, 00166 Rome (Italy); Carnevale, Ennio [Industrial Engineering Department, University of Florence, via Santa Marta, 3, 50129 Florence (Italy); Corti, Andrea [Department of Information Engineering and Mathematics, University of Siena, via Roma, 56, 53100 (Italy)

    2015-03-15

    Highlights: • The topic of energy recovery from waste by thermal treatment is reviewed. • Combustion, gasification and pyrolysis were considered. • Data about energy recovery performances were collected and compared. • Main limitations to high values of energy performances were illustrated. • Diffusion of energy recovery from waste in EU, USA and other countries was discussed. - Abstract: The aim of this work is to identify the current level of energy recovery through waste thermal treatment. The state of the art in energy recovery from waste was investigated, highlighting the differences for different types of thermal treatment, considering combustion/incineration, gasification and pyrolysis. Also different types of wastes – Municipal Solid Waste (MSW), Refuse Derived Fuel (RDF) or Solid Refuse Fuels (SRF) and some typologies of Industrial Waste (IW) (sludge, plastic scraps, etc.) – were included in the analysis. The investigation was carried out mainly reviewing papers, published in scientific journals and conferences, but also considering technical reports, to gather more information. In particular the goal of this review work was to synthesize studies in order to compare the values of energy conversion efficiencies measured or calculated for different types of thermal processes and different types of waste. It emerged that the dominant type of thermal treatment is incineration associated to energy recovery in a steam cycle. When waste gasification is applied, the produced syngas is generally combusted in a boiler to generate steam for energy recovery in a steam cycle. For both the possibilities – incineration or gasification – cogeneration is the mean to improve energy recovery, especially for small scale plants. In the case of only electricity production, the achievable values are strongly dependent on the plant size: for large plant size, where advanced technical solutions can be applied and sustained from an economic point of view, net

  16. Sscience & technology review; Science Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. This review for the month of July 1996 discusses: Frontiers of research in advanced computations, The multibeam Fabry-Perot velocimeter: Efficient measurement of high velocities, High-tech tools for the American textile industry, and Rock mechanics: can the Tuff take the stress.

  17. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    1984-03-01

    The Lawrence Livermore National Laboratory publishes the Energy and Technology Review Monthly. This periodical reviews progress mode is selected programs at the laboratory. This issue includes articles on in-situ coal gasification, on chromosomal aberrations in human sperm, on high speed cell sorting and on supercomputers.

  18. Energy and technology review

    International Nuclear Information System (INIS)

    1984-03-01

    The Lawrence Livermore National Laboratory publishes the Energy and Technology Review Monthly. This periodical reviews progress mode is selected programs at the laboratory. This issue includes articles on in-situ coal gasification, on chromosomal aberrations in human sperm, on high speed cell sorting and on supercomputers

  19. Nuclear technology review 2002

    International Nuclear Information System (INIS)

    2002-08-01

    The unifying theme of the Nuclear Technology Review 2002 (NTR-2002) is the importance of innovation. Innovation makes it possible to step beyond incremental evolutionary improvements constrained by diminishing returns. For crop production and public health, for example, the sterile insect technique created a whole new path for future improvements, distinctly different from applying ever larger amounts of pesticides. Nuclear techniques offer a new and safer approach to removing the world's estimated 60,000,000 abandoned land mines. New precision techniques create the potential for ever less intrusive and more effective radiation treatments for cancer. For nuclear power continuing innovation will be a key factor in closing the projection gap between long term global energy scenarios in which nuclear power expands substantially and near term scenarios with only modest expansion or even decline. While the NTR-2002 presents a worldwide review of the state-of-the-art of nuclear science and technology, and not an annual report on IAEA activities, it notes areas where the Agency has a particularly important role to play. Part I of the NTR-2002 'Fundamentals of Nuclear Development', reviews developments in the field of nuclear, atomic and molecular data. Research reactors remain essential to progress in nuclear science and technology. Part I reviews advances in radioisotope production, the use of accelerators and neutron activation analysis relevant to applications ranging from medicine particularly the light against cancer to industry. Part I also reviews developments in nuclear instrumentation and nuclear fusion, particularly in connection with the International Thermonuclear Experimental Reactor. Part II begins with a summary of nuclear power production in 2001. At the end of 2001 there were 438 nuclear power plants (NPPs) in operation, corresponding to a total capacity of 353 GW(e), more than 10000 reactor-years of cumulative operating experience and about 16% of global

  20. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

    1994-02-01

    The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ``Pneumatic Excavator`` which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions.

  1. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement

    International Nuclear Information System (INIS)

    Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

    1994-02-01

    The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ''Pneumatic Excavator'' which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions

  2. Soil treatment technologies combined

    International Nuclear Information System (INIS)

    Davis, K.J.; Russell, D.J.

    1993-01-01

    The Superfund Amendments and Reauthorization Act (SARA) presents a legislative mandate to select effective and long-term remediation options. SARA has spurred the development of innovative technologies and other remedial alternatives that can be applied to the diverse contaminated media at hazardous waste sites. Even though many treatment technologies have been investigated for use at hazardous waste sites, only a few have been used successfully. Soil vapor extraction and soil composting have achieved cleanup goals at sites with soils contaminated with solvents, aromatic hydrocarbons and petroleum derivatives. With the increased use of innovative on-site technologies, the integration of multiple technologies to remediate sites with complex contaminants becomes a viable and cost-effective remedial alternative. Soil vapor extraction and composting have been applied successfully as individual technologies at hazardous waste sites. An integration of these two technologies also has been used to remediate a complex contaminated site

  3. Review on technology II

    International Nuclear Information System (INIS)

    Mroziewicz, B.

    1986-01-01

    The most important requirements for the spectral properties of photodetectors are reviewed with particular attention to the fiber optics applications. Data on a number of materials are collected and presented. Pros and cons are pointed out for each type of photodetector-photoconductor, p-i-n photodiode and APD. A review is given of the relevant papers presented in the poster session 'Technology II' of the Symposium

  4. Nuclear technology review 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-08-15

    The viability and credibility of a wide range of nuclear-based technologies require ready access to high-quality atomic, molecular and nuclear data. The demands of new nuclear technologies continue to determine the direction(s) of future data development, including the requirements for data that address innovative fuel cycles, accelerator-driven systems, nuclear incineration, fusion devices, diagnostic and therapeutic medical treatment by radiation, optimization of medical isotope production, non-destructive materials testing, radiation analytical techniques, minerals exploration and land-mine detection. Some recent data development projects with diverse applications are a search engine for Atomic and Molecular data to permit simultaneous data retrieval from a number of different sources for both numerical and bibliographic databases to aid designers. For over 50 years, research reactors have made valuable contributions to the development of nuclear power, basic science, materials development, radioisotope production for medicine and industry, and education and training. They remain core experimental instruments. As of June 2004, 672 research reactors are recorded in the IAEA's Research Reactor Data Base (RRDB), of which 274 are operational in 56 countries (85 in 39 developing countries), 214 are shut down, 168 have been decommissioned and 16 are planned or under construction. Nuclear power supplied 16% of global electricity generation in 2002, and as of 31 December 2003 there were 439 NPPs operating worldwide. Their global energy availability factor has risen steadily from 74.2% in 1991 to approximately 84% in 2003. In 2003 two new NPPs were connected to the grid, a 665 MW(e) pressurized heavy water reactor (PHWR) in China and a 960 MW(e) pressurized water reactor (PWR) in the Republic of Korea. In addition Canada restarted two units that had been shutdown. Construction started on one new NPP in India. Four 50 MW(e) units in the UK were retired, as were one 640 MW

  5. Nuclear technology review 2004

    International Nuclear Information System (INIS)

    2004-08-01

    The viability and credibility of a wide range of nuclear-based technologies require ready access to high-quality atomic, molecular and nuclear data. The demands of new nuclear technologies continue to determine the direction(s) of future data development, including the requirements for data that address innovative fuel cycles, accelerator-driven systems, nuclear incineration, fusion devices, diagnostic and therapeutic medical treatment by radiation, optimization of medical isotope production, non-destructive materials testing, radiation analytical techniques, minerals exploration and land-mine detection. Some recent data development projects with diverse applications are a search engine for Atomic and Molecular data to permit simultaneous data retrieval from a number of different sources for both numerical and bibliographic databases to aid designers. For over 50 years, research reactors have made valuable contributions to the development of nuclear power, basic science, materials development, radioisotope production for medicine and industry, and education and training. They remain core experimental instruments. As of June 2004, 672 research reactors are recorded in the IAEA's Research Reactor Data Base (RRDB), of which 274 are operational in 56 countries (85 in 39 developing countries), 214 are shut down, 168 have been decommissioned and 16 are planned or under construction. Nuclear power supplied 16% of global electricity generation in 2002, and as of 31 December 2003 there were 439 NPPs operating worldwide. Their global energy availability factor has risen steadily from 74.2% in 1991 to approximately 84% in 2003. In 2003 two new NPPs were connected to the grid, a 665 MW(e) pressurized heavy water reactor (PHWR) in China and a 960 MW(e) pressurized water reactor (PWR) in the Republic of Korea. In addition Canada restarted two units that had been shutdown. Construction started on one new NPP in India. Four 50 MW(e) units in the UK were retired, as were one 640 MW

  6. Water Treatment Technology - Filtration.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on filtration provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: purposes of sedimentation basins and flocculation…

  7. Water Treatment Technology - Wells.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on wells provides instructional materials for five competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: dug, driven, and chilled wells, aquifer types, deep well…

  8. Water Treatment Technology - Hydraulics.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on hydraulics provides instructional materials for three competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: head loss in pipes in series, function loss in…

  9. Review of Removal, Containment and Treatment Technologies for Remediation of Contaminated Sediment in the Great Lakes

    Science.gov (United States)

    1990-12-01

    selected as a remedy for the St. Paul Waterway Remedial Action and Habitat Restoration Project because it created few adverse impacts and provided great...J. K., Weitkamp, D. E., and Weiner, K. S. 1989. "St. Paul Waterway Remedial Action and Habitat Restoration Project," Contaminated Marine Sedi- ments...Electrocoagulation Anaerobic biodegradation Granular media filtration Flocculation/coagulation BioTrol aqueous treatment Membrane microfiLtration system Freeze

  10. Supercapacitors specialities - Technology review

    Energy Technology Data Exchange (ETDEWEB)

    Münchgesang, Wolfram; Meisner, Patrick [Institut für Experimentelle Physik, Technische Universität Bergakademie Freiberg, Leipziger Straße 23, 09596 Freiberg (Germany); Yushin, Gleb [Georgia Institute of Technology, School of Materials Science and Engineering, Atlanta, GA 30326 (United States)

    2014-06-16

    Commercial electrochemical capacitors (supercapacitors) are not limited to mobile electronics anymore, but have reached the field of large-scale applications, like smart grid, wind turbines, power for large scale ground, water and aerial transportation, energy-efficient industrial equipment and others. This review gives a short overview of the current state-of-the-art of electrochemical capacitors, their commercial applications and the impact of technological development on performance.

  11. Supercapacitors specialities - Technology review

    Science.gov (United States)

    Münchgesang, Wolfram; Meisner, Patrick; Yushin, Gleb

    2014-06-01

    Commercial electrochemical capacitors (supercapacitors) are not limited to mobile electronics anymore, but have reached the field of large-scale applications, like smart grid, wind turbines, power for large scale ground, water and aerial transportation, energy-efficient industrial equipment and others. This review gives a short overview of the current state-of-the-art of electrochemical capacitors, their commercial applications and the impact of technological development on performance.

  12. Supercapacitors specialities - Technology review

    International Nuclear Information System (INIS)

    Münchgesang, Wolfram; Meisner, Patrick; Yushin, Gleb

    2014-01-01

    Commercial electrochemical capacitors (supercapacitors) are not limited to mobile electronics anymore, but have reached the field of large-scale applications, like smart grid, wind turbines, power for large scale ground, water and aerial transportation, energy-efficient industrial equipment and others. This review gives a short overview of the current state-of-the-art of electrochemical capacitors, their commercial applications and the impact of technological development on performance

  13. Energy and technology review

    International Nuclear Information System (INIS)

    Brown, P.S.

    1983-06-01

    Research activities at Lawrence Livermore National Laboratory are described in the Energy and Technology Review. This issue includes articles on measuring chromosome changes in people exposed to cigarette smoke, sloshing-ion experiments in the tandem mirror experiment, aluminum-air battery development, and a speech by Edward Teller on national defense. Abstracts of the first three have been prepared separately for the data base

  14. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Brown, P.S. (ed.)

    1983-06-01

    Research activities at Lawrence Livermore National Laboratory are described in the Energy and Technology Review. This issue includes articles on measuring chromosome changes in people exposed to cigarette smoke, sloshing-ion experiments in the tandem mirror experiment, aluminum-air battery development, and a speech by Edward Teller on national defense. Abstracts of the first three have been prepared separately for the data base. (GHT)

  15. Sscience ampersand technology review

    International Nuclear Information System (INIS)

    1996-05-01

    This monthly science and technology review features a report about Lawrence Livermore National Laboratory work on an awesome, inevitable, unpredictable, and potentially dangerous natural phenomenon, lightning. This feature article tells of the development of guidance by Laboratory engineers on how to deal with the effects of lightning on Department of Energy facilities, especially those where nuclear and high explosive materials are handled and stored. Other topics are Groundwater Modeling: More Cost Effective Cleanup by Design, Dual- Band Infrared Computed Tomography: Searching for Hidden Defects, and Plating Shop Moves to Finish Off Waste

  16. Energy and technology review

    International Nuclear Information System (INIS)

    1983-10-01

    Three review articles are presented. The first describes the Lawrence Livermore Laboratory role in the research and development of oil-shale retorting technology through its studies of the relevant chemical and physical processes, mathematical models, and new retorting concepts. Second is a discussion of investigation of properties of dense molecular fluids at high pressures and temperatures to improve understanding of high-explosive behavior, giant-planet structure, and hydrodynamic shock interactions. Third, by totally computerizing the triple-quadrupole mass spectrometer system, the laboratory has produced a general-purpose instrument of unrivaled speed, selectivity, and adaptability for the analysis and identification of trace organic constituents in complex chemical mixtures

  17. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    Three review articles are presented. The first describes the Lawrence Livermore Laboratory role in the research and development of oil-shale retorting technology through its studies of the relevant chemical and physical processes, mathematical models, and new retorting concepts. Second is a discussion of investigation of properties of dense molecular fluids at high pressures and temperatures to improve understanding of high-explosive behavior, giant-planet structure, and hydrodynamic shock interactions. Third, by totally computerizing the triple-quadrupole mass spectrometer system, the laboratory has produced a general-purpose instrument of unrivaled speed, selectivity, and adaptability for the analysis and identification of trace organic constituents in complex chemical mixtures. (GHT)

  18. Sscience & technology review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This monthly science and technology review features a report about Lawrence Livermore National Laboratory work on an awesome, inevitable, unpredictable, and potentially dangerous natural phenomenon, lightning. This feature article tells of the development of guidance by Laboratory engineers on how to deal with the effects of lightning on Department of Energy facilities, especially those where nuclear and high explosive materials are handled and stored. Other topics are Groundwater Modeling: More Cost Effective Cleanup by Design, Dual- Band Infrared Computed Tomography: Searching for Hidden Defects, and Plating Shop Moves to Finish Off Waste.

  19. Review of encapsulation technologies

    International Nuclear Information System (INIS)

    Shaulis, L.

    1996-09-01

    The use of encapsulation technology to produce a compliant waste form is an outgrowth from existing polymer industry technology and applications. During the past 12 years, the Department of Energy (DOE) has been researching the use of this technology to treat mixed wastes (i.e., containing hazardous and radioactive wastes). The two primary encapsulation techniques are microencapsulation and macroencapsulation. Microencapsulation is the thorough mixing of a binding agent with a powdered waste, such as incinerator ash. Macroencapsulation coats the surface of bulk wastes, such as lead debris. Cement, modified cement, and polyethylene are the binding agents which have been researched the most. Cement and modified cement have been the most commonly used binding agents to date. However, recent research conducted by DOE laboratories have shown that polyethylene is more durable and cost effective than cements. The compressive strength, leachability, resistance to chemical degradation, etc., of polyethylene is significantly greater than that of cement and modified cement. Because higher waste loads can be used with polyethylene encapsulant, the total cost of polyethylene encapsulation is significantly less costly than cement treatment. The only research lacking in the assessment of polyethylene encapsulation treatment for mixed wastes is pilot and full-scale testing with actual waste materials. To date, only simulated wastes have been tested. The Rocky Flats Environmental Technology Site had planned to conduct pilot studies using actual wastes during 1996. This experiment should provide similar results to the previous tests that used simulated wastes. If this hypothesis is validated as anticipated, it will be clear that polyethylene encapsulation should be pursued by DOE to produce compliant waste forms

  20. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Poggio, A.J. (ed.)

    1988-10-01

    This issue of Energy and Technology Review contains: Neutron Penumbral Imaging of Laser-Fusion Targets--using our new penumbral-imaging diagnostic, we have obtained the first images that can be used to measure directly the deuterium-tritium burn region in laser-driven fusion targets; Computed Tomography for Nondestructive Evaluation--various computed tomography systems and computational techniques are used in nondestructive evaluation; Three-Dimensional Image Analysis for Studying Nuclear Chromatin Structure--we have developed an optic-electronic system for acquiring cross-sectional views of cell nuclei, and computer codes to analyze these images and reconstruct the three-dimensional structures they represent; Imaging in the Nuclear Test Program--advanced techniques produce images of unprecedented detail and resolution from Nevada Test Site data; and Computational X-Ray Holography--visible-light experiments and numerically simulated holograms test our ideas about an x-ray microscope for biological research.

  1. Treatment technology for organic radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, S. J.; Lee, Y. H.; Shon, J. S. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-12-01

    In this report, various alternative technologies to the incineration for the treatment of radioactive organic wastes were described and reviewed, fallen into two groups of low temperature technologies and high temperature technologies. These technologies have the advantages of low volume gaseous emission, few or no dioxin generation, and operation at low enough temperature that radionuclides are not volatilized. Delphi chemical oxidation, mediated electrochemical oxidation, and photolytic ultraviolet oxidation appear to be the most promising low temperature oxidation process and steam reforming and supercritical water oxidation in the high temperature technologies. 52 refs., 39 figs., 2 tabs. (Author)

  2. Biodiesel production technologies: review

    Directory of Open Access Journals (Sweden)

    Shemelis Nigatu Gebremariam

    2017-05-01

    Full Text Available Biodiesel is a fuel with various benefits over the conventional diesel fuel. It is derived from renewable resources, it has less emission to environment, it is biodegradable so has very limited toxicity and above all its production can be decentralized so that it could have a potential in helping rural economies. However, there are also some worth mentioning challenges associated with production of biodiesel. Among them repeatedly mentioned are the cost of feedstock and the choice of convenient technology for efficient production of the fuel from diverse feedstock types. There are four main routes by which raw vegetable oil and/or animal fat can be made suitable for use as substituent fuel in diesel engines without modification. These are direct use or blending of oils, micro-emulsion, thermal cracking or pyrolysis and transesterification reaction. Due to the quality of the fuel produced, the transesterification method is the most preferred way to produce biodiesel from diverse feedstock types. Through this method, oils and fats (triglycerides are converted to their alkyl esters with reduced viscosity to near diesel fuel levels. There are different techniques to carry out transesterification reaction for biodiesel production. Each technique has its own advantages and disadvantages as well as its own specifically convenient feedstock character. There are also some very important reaction conditions to be given due attention in each of this techniques for efficient production of biodiesel, such as molar ratio of alcohol to oil, type and amount of catalyst, reaction temperature, reaction time, reaction medium, type and relative amount of solvents, among others. This review is meant to investigate the main transesterification techniques for biodiesel production in terms of their choice of feedstock character as well as their determinately required reaction conditions for efficient biodiesel production, so that to give an overview on their advantages

  3. The Use of Behavior Change Techniques and Theory in Technologies for Cardiovascular Disease Prevention and Treatment in Adults: A Comprehensive Review.

    Science.gov (United States)

    Winter, Sandra J; Sheats, Jylana L; King, Abby C

    2016-01-01

    This review examined the use of health behavior change techniques and theory in technology-enabled interventions targeting risk factors and indicators for cardiovascular disease (CVD) prevention and treatment. Articles targeting physical activity, weight loss, smoking cessation and management of hypertension, lipids and blood glucose were sourced from PubMed (November 2010-2015) and coded for use of 1) technology, 2) health behavior change techniques (using the CALO-RE taxonomy), and 3) health behavior theories. Of the 984 articles reviewed, 304 were relevant (240=intervention, 64=review). Twenty-two different technologies were used (M=1.45, SD=+/-0.719). The most frequently used behavior change techniques were self-monitoring and feedback on performance (M=5.4, SD=+/-2.9). Half (52%) of the intervention studies named a theory/model - most frequently Social Cognitive Theory, the Trans-theoretical Model, and the Theory of Planned Behavior/Reasoned Action. To optimize technology-enabled interventions targeting CVD risk factors, integrated behavior change theories that incorporate a variety of evidence-based health behavior change techniques are needed. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Systematic review automation technologies

    Science.gov (United States)

    2014-01-01

    Systematic reviews, a cornerstone of evidence-based medicine, are not produced quickly enough to support clinical practice. The cost of production, availability of the requisite expertise and timeliness are often quoted as major contributors for the delay. This detailed survey of the state of the art of information systems designed to support or automate individual tasks in the systematic review, and in particular systematic reviews of randomized controlled clinical trials, reveals trends that see the convergence of several parallel research projects. We surveyed literature describing informatics systems that support or automate the processes of systematic review or each of the tasks of the systematic review. Several projects focus on automating, simplifying and/or streamlining specific tasks of the systematic review. Some tasks are already fully automated while others are still largely manual. In this review, we describe each task and the effect that its automation would have on the entire systematic review process, summarize the existing information system support for each task, and highlight where further research is needed for realizing automation for the task. Integration of the systems that automate systematic review tasks may lead to a revised systematic review workflow. We envisage the optimized workflow will lead to system in which each systematic review is described as a computer program that automatically retrieves relevant trials, appraises them, extracts and synthesizes data, evaluates the risk of bias, performs meta-analysis calculations, and produces a report in real time. PMID:25005128

  5. Science & Technology Review September 2017

    Energy Technology Data Exchange (ETDEWEB)

    Duoss, Eric B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, Paul R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-08-16

    This is the September 2017 edition of the LLNL, Science and Technology Review. At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  6. Energy and technology review

    International Nuclear Information System (INIS)

    1981-10-01

    Research is described in three areas, high-technology design of unconventional, nonnuclear weapons, a model for analyzing special nuclear materials safeguards decisions, and a nuclear weapons accident exercise (NUWAX-81)

  7. Nuclear Technology Review 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-08-15

    The year 2006 saw increasing activities in the field of nuclear power. Significant plans for expansion were announced in some countries and plans for introducing nuclear power in some others. The year began with announcements by both the Russian Federation and the United States of America of international fuel cycle proposals in anticipation of a substantial expansion of nuclear power worldwide. In January, Russian President Vladimir Putin outlined a proposal to create 'a system of international centres providing nuclear fuel cycle services, including enrichment, on a non-discriminatory basis and under the control of the IAEA'. In February, the USA proposed a Global Nuclear Energy Partnership to develop advanced recycling technologies that would not separate pure plutonium; international collaboration in supplying fuel for States which agree not to pursue enrichment and reprocessing; advanced reactors to consume recycled spent fuel while providing energy; and safe and secure small reactors suited to the needs of developing countries. New medium-term projections by the IAEA and the International Energy Agency present a picture with opportunities for substantial nuclear expansion, but still with notable uncertainty. A number of countries have announced plans for significant expansion: China, India, Japan, Pakistan, the Russian Federation and the Republic of Korea. Announcements of planned license applications by US companies and consortia mentioned approximately 25 new reactors. Two site preparation applications were submitted in Canada. A major energy review by the United Kingdom concluded that new nuclear power stations would make a significant contribution to meeting the UK's energy policy goals. Utilities from Estonia, Lithuania and Latvia launched a joint feasibility study of a new nuclear power plant to serve all three countries, and Belarus, Egypt, Indonesia, Nigeria and Turkey made announcements of steps they are taking toward their first nuclear power plants

  8. Nuclear Technology Review 2007

    International Nuclear Information System (INIS)

    2007-08-01

    The year 2006 saw increasing activities in the field of nuclear power. Significant plans for expansion were announced in some countries and plans for introducing nuclear power in some others. The year began with announcements by both the Russian Federation and the United States of America of international fuel cycle proposals in anticipation of a substantial expansion of nuclear power worldwide. In January, Russian President Vladimir Putin outlined a proposal to create 'a system of international centres providing nuclear fuel cycle services, including enrichment, on a non-discriminatory basis and under the control of the IAEA'. In February, the USA proposed a Global Nuclear Energy Partnership to develop advanced recycling technologies that would not separate pure plutonium; international collaboration in supplying fuel for States which agree not to pursue enrichment and reprocessing; advanced reactors to consume recycled spent fuel while providing energy; and safe and secure small reactors suited to the needs of developing countries. New medium-term projections by the IAEA and the International Energy Agency present a picture with opportunities for substantial nuclear expansion, but still with notable uncertainty. A number of countries have announced plans for significant expansion: China, India, Japan, Pakistan, the Russian Federation and the Republic of Korea. Announcements of planned license applications by US companies and consortia mentioned approximately 25 new reactors. Two site preparation applications were submitted in Canada. A major energy review by the United Kingdom concluded that new nuclear power stations would make a significant contribution to meeting the UK's energy policy goals. Utilities from Estonia, Lithuania and Latvia launched a joint feasibility study of a new nuclear power plant to serve all three countries, and Belarus, Egypt, Indonesia, Nigeria and Turkey made announcements of steps they are taking toward their first nuclear power plants

  9. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O' Neal, E.; Van Dyke, P. (eds.)

    1982-07-01

    The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs. (GHT)

  10. Energy and technology review

    International Nuclear Information System (INIS)

    Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O'Neal, E.; Van Dyke, P.

    1982-07-01

    The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs

  11. Tidal energy - a technology review

    International Nuclear Information System (INIS)

    Price, R.

    1991-01-01

    The tides are caused by gravitational attraction of the sun and the moon acting upon the world's oceans. This creates a clean renewable form of energy which can in principle be tapped for the benefit of mankind. This paper reviews the status of tidal energy, including the magnitude of the resource, the technology which is available for its extraction, the economics, possible environmental effects and non-technical barriers to its implementation. Although the total energy flux of the tides is large, at about 2 TW, in practice only a very small fraction of this total potential can be utilised in the foreseeable future. This is because the energy is spread diffusely over a wide area, requiring large and expensive plant for its collection, and is often available remote from centres of consumption. The best mechanism for exploiting tidal energy is to employ estuarine barrages at suitable sites with high tidal ranges. The technology is relatively mature and components are commercially available now. Also, many of the best sites for implementation have been identified. However, the pace and extent of commercial exploitation of tidal energy is likely to be significantly influenced, both by the treatment of environmental costs of competing fossil fuels, and by the availability of construction capital at modest real interest rates. The largest projects could require the involvement of national governments if they are to succeed. (author) 8 figs., 2 tabs., 19 refs

  12. Energy and Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    Bookless, W.A.; McElroy, L.; Wheatcraft, D.; Middleton, C.; Shang, S. [eds.

    1994-10-01

    Two articles are included: the industrial computing initiative, and artificial hip joints (applying weapons expertise to medical technology). Three research highlights (briefs) are included: KEN project (face recognition), modeling groundwater flow and chemical migration, and gas and oil national information infrastructure.

  13. Energy and Technology Review

    International Nuclear Information System (INIS)

    Bookless, W.A.; McElroy, L.; Wheatcraft, D.; Middleton, C.; Shang, S.

    1994-10-01

    Two articles are included: the industrial computing initiative, and artificial hip joints (applying weapons expertise to medical technology). Three research highlights (briefs) are included: KEN project (face recognition), modeling groundwater flow and chemical migration, and gas and oil national information infrastructure

  14. Energy and technology review

    International Nuclear Information System (INIS)

    Carr, R.B.; McCleb, C.S.; Prono, J.K.

    1976-01-01

    Brief discussions of research progress on the following topics are given: (1) lasers and laser applications, (2) advanced energy systems, (3) science and technology, and (4) national security. Some experiments on the in-flight laser irradiation of ammonia pellets are discussed

  15. Energy and Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    1982-09-01

    This is the first of two issues commemorating the 30th anniversary of the Lawrence Livermore National Laboratory. The early history of the laboratory is reviewed, including: the LLNL-Nevada organization; project Plowshare; the chemistry and materials science department; and development of computer systems. (GHT)

  16. Energy and Technology Review

    International Nuclear Information System (INIS)

    1982-09-01

    This is the first of two issues commemorating the 30th anniversary of the Lawrence Livermore National Laboratory. The early history of the laboratory is reviewed, including: the LLNL-Nevada organization; project Plowshare; the chemistry and materials science department; and development of computer systems

  17. Energy and technology review

    International Nuclear Information System (INIS)

    1981-05-01

    Research programs at LLNL are reviewed. This issue discusses validation of the pulsed-power design for FXR, the NOVA plasma shutter, thermal control of the MFTF superconducting magnet, a low-energy x-ray spectrometer for pulsed-source diagnostics, micromachining, the electronics engineer's design station, and brazing with a laser microtorch

  18. Philosophy of technology: a review

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, F.

    1985-06-01

    The continuous technological progress since the beginning of the Industrial Revolution seemed to confirm the Rationalists and the optimism of the Age of Enlightenment. This is no longer so. In this review new lines of inquiry into this change are discussed, and various philosophical features and traditions are explored. It proves difficult to define technology; the philosophy of science and its methodology are considered, mind and machines are contrasted, and the review concludes with a consideration of the arguments put forward for metaphysical interpretations of technology.

  19. Energy and technology review

    International Nuclear Information System (INIS)

    1982-08-01

    Three areas of research are discussed: microcomputer technology applied to inspecting machined parts to determine roundness in ultraprecision measurements; development of an electrolytic technique for preparing dinitrogen pentoxide as a potentially less expensive step in the large-scale synthesis of the explosive HMX; and the application of frequency conversion to short wavelengths in the Novette and Nova lasers to improve the performance of inertial-confinement fusion targets

  20. Energy and technology review

    International Nuclear Information System (INIS)

    Carr, R.B.; Bathgate, M.B.; Crawford, R.B.; McCaleb, C.S.; Prono, J.K.

    1976-05-01

    The chief objective of LLL's biomedical and environmental research program is to enlarge mankind's understanding of the implications of energy-related chemical and radioactive effluents in the biosphere. The effluents are studied at their sources, during transport through the environment, and at impact on critical resources, important ecosystems, and man himself. We are pursuing several projects to acquire such knowledge in time to guide the development of energy technologies toward safe, reasonable, and optimal choices

  1. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Bathgate, M.B.; Crawford, R.B.; McCaleb, C.S.; Prono, J.K. (eds.)

    1976-05-01

    The chief objective of LLL's biomedical and environmental research program is to enlarge mankind's understanding of the implications of energy-related chemical and radioactive effluents in the biosphere. The effluents are studied at their sources, during transport through the environment, and at impact on critical resources, important ecosystems, and man himself. We are pursuing several projects to acquire such knowledge in time to guide the development of energy technologies toward safe, reasonable, and optimal choices.

  2. Energy and Technology Review

    International Nuclear Information System (INIS)

    1986-03-01

    An overview is given of research programs at a two-stage light-gas gun facility. Representative gas-gun experiments are described, and the impact of this research on other LLNL programs and on high-pressure physics work in general are discussed. Particular applications reported include: measurement of equations of state for various materials, synthesis and study of novel materials, and studies of high explosives. Specialized diagnostic techniques for gas-gun experiments are reviewed

  3. Energy and technology review

    International Nuclear Information System (INIS)

    1982-06-01

    Brief reviews are presented of research programs at Lawrence Livermore Laboratory. In one, fast and precise measurement techniques to meet the demanding specifications for microsphere targets used in inertial-confinement fusion experiments are described. Another program is described in which a Raman-spectroscopy microprobe is used to perform molecular-structure analyses on submicron-size particles. Finally, the first year of the controlled thermonuclear reactions program is described

  4. Energy and Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    1986-03-01

    An overview is given of research programs at a two-stage light-gas gun facility. Representative gas-gun experiments are described, and the impact of this research on other LLNL programs and on high-pressure physics work in general are discussed. Particular applications reported include: measurement of equations of state for various materials, synthesis and study of novel materials, and studies of high explosives. Specialized diagnostic techniques for gas-gun experiments are reviewed. (LEW)

  5. Grey water treatment systems: A review

    NARCIS (Netherlands)

    Abu-Ghunmi, L.N.A.H.; Zeeman, G.; Fayyad, M.; Lier, van J.B.

    2011-01-01

    This review aims to discern a treatment for grey water by examining grey water characteristics, reuse standards, technology performance and costs. The review reveals that the systems for treating grey water, whatever its quality, should consist of processes that are able to trap pollutants with a

  6. Ultrasonication and food technology: A review

    Directory of Open Access Journals (Sweden)

    Ishrat Majid

    2015-12-01

    Full Text Available With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extraction, drying, filtration, emulsification, sterilization, cutting, etc. Ultrasound is being applied as an effective preservation tool in many food-processing fields viz. vegetables and fruits, cereal products, honey, gels, proteins, enzymes, microbial inactivation, cereal technology, water treatment, diary technology, etc. This review summarizes the latest knowledge on impact and application of ultrasound in food technology.

  7. Nuclear technology review 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-08-15

    Cadarache, France.The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 24 members, with the addition in 2005 of Ukraine and the United States of America. Current INPRO activities include completion of a user manual on the INPRO methodology, application of the methodology to assessing innovative nuclear energy systems (INSs) in national and multinational studies, analyses of the role and structure of INSs in meeting energy demands in a sustainable manner, and selection of the most suitable areas for collaborative development. Developments in accelerator based techniques, production of radioisotopes and some novel uses of nanotechnology are also reported. Nuclear technologies continue to play key and often unique roles in food production and safety, in human and animal health, in water resource management and in the environment. Mutation breeding of crops, for example, has led to the use of previously unusable land in many countries for rice production. In human health, the use of stable isotopes is becoming an accepted tool for the development of nutrition programmes. Nuclear medicine is benefiting from technological advances in computing. Sustainable water management and desalination remain high on the international agenda. New developments in isotopic analysis of hydrological samples hold promise for increasing the use of isotopes in water resources management. Advances in sampling and analytical techniques have assisted in better understanding of the environment. Developments in all these areas are also reported.

  8. Nuclear technology review 2006

    International Nuclear Information System (INIS)

    2006-08-01

    Cadarache, France.The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 24 members, with the addition in 2005 of Ukraine and the United States of America. Current INPRO activities include completion of a user manual on the INPRO methodology, application of the methodology to assessing innovative nuclear energy systems (INSs) in national and multinational studies, analyses of the role and structure of INSs in meeting energy demands in a sustainable manner, and selection of the most suitable areas for collaborative development. Developments in accelerator based techniques, production of radioisotopes and some novel uses of nanotechnology are also reported. Nuclear technologies continue to play key and often unique roles in food production and safety, in human and animal health, in water resource management and in the environment. Mutation breeding of crops, for example, has led to the use of previously unusable land in many countries for rice production. In human health, the use of stable isotopes is becoming an accepted tool for the development of nutrition programmes. Nuclear medicine is benefiting from technological advances in computing. Sustainable water management and desalination remain high on the international agenda. New developments in isotopic analysis of hydrological samples hold promise for increasing the use of isotopes in water resources management. Advances in sampling and analytical techniques have assisted in better understanding of the environment. Developments in all these areas are also reported

  9. Science & Technology Review: September 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-09-30

    This is the September issue of the Lawrence Livermore National Laboratory's Science & Technology Review, which communicates, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. This month, there are features on "Laboratory Investments Drive Computational Advances" and "Laying the Groundwork for Extreme-Scale Computing." Research highlights include "Nuclear Data Moves into the 21st Century", "Peering into the Future of Lick Observatory", and "Facility Drives Hydrogen Vehicle Innovations."

  10. Nuclear Technology Review 2012

    International Nuclear Information System (INIS)

    2012-09-01

    In 2011, nuclear energy continued to play an important role in global electricity production despite the accident at the Fukushima Daiichi nuclear power plant (NPP). Total generating nuclear power capacity was slightly lower than in previous years due to the permanent shutdown of 13 reactors in 2011, including 8 in Germany and 4 in Japan in the wake of the accident. However, there were 7 new grid connections compared to 5 in 2010, 2 in 2009 and none in 2008. Significant growth in the use of nuclear energy worldwide is still anticipated - between 35% and 100% by 2030 - although the Agency projections for 2030 are 7-8% lower than projections made in 2010. The factors that have contributed to an increased interest in nuclear power did not change: an increasing global demand for energy, concerns about climate change, energy security and uncertainty about fossil fuel supplies. Most of the growth is still expected in countries that already have operating NPPs, especially in Asia, with China and India remaining the main centres of expansion while the Russian Federation will also remain a centre of strong growth. The 7-8% drop in projected growth for 2030 reflects an accelerated phase-out of nuclear power in Germany, some immediate shutdowns and a government review of the planned expansion in Japan, as well as temporary delays in expansion in several other countries. Measures taken by countries as a result of the Fukushima Daiichi nuclear accident have been varied. A number of countries announced reviews of their programmes. Belgium, Germany and Switzerland took additional steps to phase out nuclear power entirely while others re-emphasized their expansion plans. Many Member States carried out national safety assessment reviews in 2011 (often called 'stress tests'), and commitments were made to complete any remaining assessments promptly and to implement the necessary corrective action. In countries considering the introduction of nuclear power, interest remained strong

  11. Science & Technology Review June 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-06-01

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  12. Nuclear Technology Review 2008

    International Nuclear Information System (INIS)

    2008-08-01

    , on a non-discriminatory basis and under the control of the IAEA. Nineteen countries signed a statement of principles of the Global Nuclear Energy Partnership, which aims at accelerating development and deployment of advanced fuel cycle technologies to foster development, improve the environment, and reduce the risk of nuclear proliferation. The NRC approved the release of most of the Big Rock Point nuclear power plant site and most of the Yankee Rowe nuclear power plant site for unrestricted public use. Thus, ten power plants around the world have been completely decommissioned with their sites released for unconditional use. Seventeen plants have been partially dismantled and safely enclosed. Thirty-two are being dismantled prior to eventual site release, and thirty-four reactors are undergoing minimum dismantling prior to long term enclosure. In September, the IAEA launched a new Network of Centres of Excellence for Decommissioning to improve the flow of knowledge and experience among those engaged in decommissioning and to encourage organizations in developed Member States to contribute to the activities of Member States requiring decommissioning assistance. Nuclear and isotopic techniques continue to make substantive contributions in agriculture, human health, the marine and terrestrial environments as well as in water resource management. In food and agriculture, plant mutation breeding is supporting the development of new varieties of crops that bring enhanced yields while also providing significant environmental benefits through reduced requirements for fertilizers and increased resistance to biotic and abiotic stresses. The genetic enhancement of biomass crops is useful in responding to increasing demands for biofuels. In addition to the continuing use of irradiation for sanitary purposes, the use of irradiation for phytosanitary applications, especially those applications related to quarantine measures, is increasing.

  13. Nuclear Technology Review 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-08-15

    , on a non-discriminatory basis and under the control of the IAEA. Nineteen countries signed a statement of principles of the Global Nuclear Energy Partnership, which aims at accelerating development and deployment of advanced fuel cycle technologies to foster development, improve the environment, and reduce the risk of nuclear proliferation. The NRC approved the release of most of the Big Rock Point nuclear power plant site and most of the Yankee Rowe nuclear power plant site for unrestricted public use. Thus, ten power plants around the world have been completely decommissioned with their sites released for unconditional use. Seventeen plants have been partially dismantled and safely enclosed. Thirty-two are being dismantled prior to eventual site release, and thirty-four reactors are undergoing minimum dismantling prior to long term enclosure. In September, the IAEA launched a new Network of Centres of Excellence for Decommissioning to improve the flow of knowledge and experience among those engaged in decommissioning and to encourage organizations in developed Member States to contribute to the activities of Member States requiring decommissioning assistance. Nuclear and isotopic techniques continue to make substantive contributions in agriculture, human health, the marine and terrestrial environments as well as in water resource management. In food and agriculture, plant mutation breeding is supporting the development of new varieties of crops that bring enhanced yields while also providing significant environmental benefits through reduced requirements for fertilizers and increased resistance to biotic and abiotic stresses. The genetic enhancement of biomass crops is useful in responding to increasing demands for biofuels. In addition to the continuing use of irradiation for sanitary purposes, the use of irradiation for phytosanitary applications, especially those applications related to quarantine measures, is increasing.

  14. Nuclear Technology Review 2009

    International Nuclear Information System (INIS)

    2009-08-01

    The year 2008 was paradoxical for nuclear power. Projections of future growth were revised upwards, but no new reactors were connected to the grid. It was the first year since 1955 without at least one new reactor coming on-line. There were, however, ten construction starts, the most since 1985. At least until the global financial crisis, cost estimates reported for new nuclear reactors were often higher than those in previous years, particularly in regions with less recent experience in new construction. However, growth targets for nuclear power were raised in the Russian Federation, and similar considerations were under review in China. India negotiated a safeguards agreement with the Agency in August, and the Nuclear Suppliers Group subsequently exempted India from previous restrictions on nuclear trade, which should allow India to accelerate its planned expansion of nuclear power. In the USA, the Nuclear Regulatory Commission (NRC) received combined licence (COL) applications for 26 new reactors. The US Department of Energy (USDOE) received 19 'Part I applications' for Federal loan guarantees to build 21 new reactors. Nonetheless, current expansion, as well as near term and long term growth prospects, remain centred in Asia. Of the ten construction starts in 2008, eight were in Asia. Twenty-eight of the 44 reactors under construction at the end of the year were in Asia, as were 28 of the last 39 new reactors to have been connected to the grid. Armenia joined the Russian Federation and Kazakhstan as members of the International Uranium Enrichment Centre in Angarsk, Siberia. The Ukrainian Government announced that Ukraine would also join. AREVA and USEC applied to the USDOE for loan guarantees for the construction of AREVA's proposed Eagle Rock Enrichment Facility and USEC's American Centrifuge Plant. Construction of an underground repository for low and medium level radioactive waste began at the former Konrad iron mine in Germany. The USDOE submitted a formal

  15. Nuclear Technology Review 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-15

    In 2009, construction started on 12 new nuclear power reactors, the largest number since 1985, and projections of future nuclear power growth were once again revised upwards. However, only two new reactors were connected to the grid, and, with three reactors retired during the year, the total nuclear power capacity around the world dropped slightly for the second year in a row. Current expansion, as well as near term and long term growth prospects, remain centred in Asia. Ten of the 12 construction starts were in Asia, as were both of the new grid connections. Although the global financial crisis that started in the second half of 2008 did not dampen overall projections for nuclear power, it was cited as a contributing factor in near-term delays or postponements affecting nuclear projects in some regions of the world. In some European countries where previously there were restrictions on the future use of nuclear power, there was a trend towards reconsidering these policies. Interest in starting new nuclear power programmes remained high. Over 60 Member States have expressed to the IAEA interest in considering the introduction of nuclear power, and, in 2009, the IAEA conducted its first Integrated Nuclear Infrastructure Review missions in Jordan, Indonesia and Vietnam. Estimates of identified conventional uranium resources (at less than $130/kg U) increased slightly, due mainly to increases reported by Australia, Canada and Namibia. Uranium spot prices declined, and final data for 2009 are expected to show a consequent decrease in uranium exploration and development. The Board of Governors has authorized the IAEA Director General to sign an agreement with the Russian Federation to establish an international reserve of low enriched uranium (LEU). It would contain 120 tonnes of LEU that could be made available to a country affected by a non-commercial interruption of its LEU supply. The agreement between the IAEA and the Russian Federation was signed in March 2010

  16. Nuclear Technology Review 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-08-15

    The year 2008 was paradoxical for nuclear power. Projections of future growth were revised upwards, but no new reactors were connected to the grid. It was the first year since 1955 without at least one new reactor coming on-line. There were, however, ten construction starts, the most since 1985. At least until the global financial crisis, cost estimates reported for new nuclear reactors were often higher than those in previous years, particularly in regions with less recent experience in new construction. However, growth targets for nuclear power were raised in the Russian Federation, and similar considerations were under review in China. India negotiated a safeguards agreement with the Agency in August, and the Nuclear Suppliers Group subsequently exempted India from previous restrictions on nuclear trade, which should allow India to accelerate its planned expansion of nuclear power. In the USA, the Nuclear Regulatory Commission (NRC) received combined licence (COL) applications for 26 new reactors. The US Department of Energy (USDOE) received 19 'Part I applications' for Federal loan guarantees to build 21 new reactors. Nonetheless, current expansion, as well as near term and long term growth prospects, remain centred in Asia. Of the ten construction starts in 2008, eight were in Asia. Twenty-eight of the 44 reactors under construction at the end of the year were in Asia, as were 28 of the last 39 new reactors to have been connected to the grid. Armenia joined the Russian Federation and Kazakhstan as members of the International Uranium Enrichment Centre in Angarsk, Siberia. The Ukrainian Government announced that Ukraine would also join. AREVA and USEC applied to the USDOE for loan guarantees for the construction of AREVA's proposed Eagle Rock Enrichment Facility and USEC's American Centrifuge Plant. Construction of an underground repository for low and medium level radioactive waste began at the former Konrad iron mine in Germany. The USDOE submitted a formal

  17. Nuclear Technology Review 2010

    International Nuclear Information System (INIS)

    2010-09-01

    In 2009, construction started on 12 new nuclear power reactors, the largest number since 1985, and projections of future nuclear power growth were once again revised upwards. However, only two new reactors were connected to the grid, and, with three reactors retired during the year, the total nuclear power capacity around the world dropped slightly for the second year in a row. Current expansion, as well as near term and long term growth prospects, remain centred in Asia. Ten of the 12 construction starts were in Asia, as were both of the new grid connections. Although the global financial crisis that started in the second half of 2008 did not dampen overall projections for nuclear power, it was cited as a contributing factor in near-term delays or postponements affecting nuclear projects in some regions of the world. In some European countries where previously there were restrictions on the future use of nuclear power, there was a trend towards reconsidering these policies. Interest in starting new nuclear power programmes remained high. Over 60 Member States have expressed to the IAEA interest in considering the introduction of nuclear power, and, in 2009, the IAEA conducted its first Integrated Nuclear Infrastructure Review missions in Jordan, Indonesia and Vietnam. Estimates of identified conventional uranium resources (at less than $130/kg U) increased slightly, due mainly to increases reported by Australia, Canada and Namibia. Uranium spot prices declined, and final data for 2009 are expected to show a consequent decrease in uranium exploration and development. The Board of Governors has authorized the IAEA Director General to sign an agreement with the Russian Federation to establish an international reserve of low enriched uranium (LEU). It would contain 120 tonnes of LEU that could be made available to a country affected by a non-commercial interruption of its LEU supply. The agreement between the IAEA and the Russian Federation was signed in March 2010

  18. Foundry Coating Technology: A Review

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat

    2011-01-01

    is important. In this review, a detailed description of these topics and examples are provided where necessary. A potential area of research in foundry coating development, using sol-gel process is suggested. The application of sol-gel technology in the development of foundry coatings is a novel approach....

  19. A review on prevention and treatment of post-orthodontic white spot lesions - evidence-based methods and emerging technologies

    DEFF Research Database (Denmark)

    Bergstrand, Fredrik; Twetman, Svante

    2011-01-01

    The aim of this paper was to update the evidence for primary and secondary prevention (treatment) of white spot lesions (WSL) adjacent to fixed orthodontic appliances.......The aim of this paper was to update the evidence for primary and secondary prevention (treatment) of white spot lesions (WSL) adjacent to fixed orthodontic appliances....

  20. TREATMENT TECHNOLOGIES FOR ARSENIC REMOVAL

    Science.gov (United States)

    The United States Environmental Protection Agency (US EPA) recently reduced the arsenic maximum contaminant level (MCL) from 0.050 mg/L to 0.010 mg/L. In order to increase arsenic outreach efforts, a summary of the new rule, related health risks, treatment technologies, and desig...

  1. Water Treatment Technology - Distribution Systems.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on distribution systems provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: types of pipe for distribution systems, types…

  2. Plasma technology for waste treatment

    International Nuclear Information System (INIS)

    Cohn, D.R.

    1995-01-01

    Improved environmental cleanup technology is needed to meet demanding goals for remediation and treatment of future waste streams. Plasma technology has unique features which could provide advantages of reduced secondary waste, lower cost, and onsite treatment for a wide variety of applications. Plasma technology can provide highly controllable processing without the need for combustion heating. It can be used to provide high temperature processing (∼10,000 degrees C). Plasma technology can also be employed for low temperature processing (down to room temperature range) through selective plasma chemistry. A graphite electrode arc plasma furnace at MIT has been used to investigate high temperature processing of simulated solid waste for Department of Energy environmental cleanup applications. Stable, non-leachable glass has been produced. To ensure reliable operation and to meet environmental objectives, new process diagnostics have been developed to measure furnace temperature and to determine metals emissions in the gaseous effluent. Selective plasma destruction of dilute concentrations of hazardous compounds in gaseous waste streams has been investigated using electron beam generated plasmas. Selective destruction makes it possible to treat the gas steam at relatively low temperatures in the 30-300 degrees C range. On-line infrared measurements have been used in feedback operation to maximize efficiency and ensure desired performance. Plasma technology and associated process diagnostics will be used in future studies of a wide range of waste streams

  3. Pertuzumab for the Neoadjuvant Treatment of Early-Stage HER2-Positive Breast Cancer: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

    Science.gov (United States)

    Squires, Hazel; Pandor, Abdullah; Thokala, Praveen; Stevens, John W; Kaltenthaler, Eva; Clowes, Mark; Coleman, Robert; Wyld, Lynda

    2018-01-01

    As part of its single technology appraisal process, the National Institute for Health and Care Excellence invited the manufacturer of pertuzumab (Perjeta ® ; Roche Products Limited) to submit evidence of its clinical and cost- effectiveness for the neoadjuvant treatment of women with high-risk, early-stage, HER2-positive breast cancer when used in combination with trastuzumab and chemotherapy. High-risk women included those with locally advanced (including inflammatory) breast cancer and women with high-risk early-stage breast cancer (classified as T2/3 or N1). The School of Health and Related Research Technology Appraisal Group at the University of Sheffield was commissioned to act as the independent Evidence Review Group. This article presents the critical review of the company's submission by the Evidence Review Group and the outcome of the National Institute for Health and Care Excellence guidance. The clinical data were mainly taken from a phase II, randomised, open-label, active controlled study (NeoSphere), which reported a significant advantage in terms of pathological complete response rates of pertuzumab in combination with trastuzumab and chemotherapy, compared with trastuzumab alone with chemotherapy (45.8 vs. 29.0%, p = 0.0141). The company did not make any indirect comparisons. A meta-analysis of 12 neoadjuvant studies investigating the relationship between pathological complete response and event-free survival was used to extrapolate the outcomes reported in the NeoSphere study. A cardiac safety study (TRYPHAENA) demonstrated the safety of pertuzumab. The company undertook a model-based economic evaluation of neoadjuvant pertuzumab plus trastuzumab and docetaxel compared with neoadjuvant trastuzumab and docetaxel over a lifetime horizon from the National Health Service and Personal Social Services perspective. The probabilistic incremental cost-effectiveness ratio was estimated to be £20,104 per quality-adjusted life-year gained for pertuzumab

  4. High-yield pulping effluent treatment technologies

    International Nuclear Information System (INIS)

    Su, W.X.; Hsieh, J.S.

    1993-03-01

    The objective of this report is to examine the high-yield (mechanical) pulp processes with respect to environmental issues affected by the discharge of their waste streams. Various statistics are given that support the view that high-yield pulping processes will have major growth in the US regions where pulp mills are located, and sites for projects in the development phase are indicated. Conventional and innovative effluent-treatment technologies applicable to these processes are reviewed. The different types of mechanical pulping or high-yield processes are explained, and the chemical additives are discussed. The important relationship between pulp yield and measure of BOD in the effluent is graphically presented. Effluent contaminants are identified, along with other important characteristics of the streams. Current and proposed environmental limitations specifically related to mechanical pulp production are reviewed. Conventional and innovative effluent-treatment technologies are discussed, along with their principle applications, uses, advantages, and disadvantages. Sludge management and disposal techniques become an intimate part of the treatment of waste streams. The conclusion is made that conventional technologies can successfully treat effluent streams under current waste-water discharge limitations, but these systems may not be adequate when stricter standards are imposed. At present, the most important issue in the treatment of pulp-mill waste is the management and disposal of the resultant sludge

  5. Online, social media and mobile technologies for psychosis treatment: a systematic review on novel user-led interventions.

    Science.gov (United States)

    Alvarez-Jimenez, M; Alcazar-Corcoles, M A; González-Blanch, C; Bendall, S; McGorry, P D; Gleeson, J F

    2014-06-01

    Internet and mobile-based interventions provide a unique opportunity to deliver cost-effective, accessible, time-unlimited support to people with psychosis. The aims of this study were to systematically compile and analyze the evidence on the acceptability, feasibility, safety and benefits of online and mobile-based interventions for psychosis. Systematic review of peer-reviewed studies examining the usability, acceptability, feasibility, safety or efficacy of user-led, Internet or mobile-based interventions, with at least 80% of participants diagnosed with schizophrenia-spectrum disorders. Of 38 potentially relevant articles, 12 were eligible for inclusion. Interventions included web-based psycho-education; web-based psycho-education plus moderated forums for patients and supporters; integrated web-based therapy, social networking and peer and expert moderation; web-based CBT; personalized advice based on clinical monitoring; and text messaging interventions. Results showed that 74-86% of patients used the web-based interventions efficiently, 75-92% perceived them as positive and useful, and 70-86% completed or were engaged with the interventions over the follow-up. Preliminary evidence indicated that online and mobile-based interventions show promise in improving positive psychotic symptoms, hospital admissions, socialization, social connectedness, depression and medication adherence. Internet and mobile-based interventions for psychosis seem to be acceptable and feasible and have the potential to improve clinical and social outcomes. The heterogeneity, poor quality and early state of current research precludes any definite conclusions. Future research should investigate the efficacy of online and mobile interventions through controlled, well-powered studies, which investigate intervention and patient factors associated with take-up and intervention effects. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Emission of gaseous organic pollutants and flue gas treatment technology

    International Nuclear Information System (INIS)

    Chmielewski, A.G.; Sun, Y.

    2007-01-01

    Gaseous organic pollutants are emitted into atmosphere from various sources, creating a threat to the environment and man. New, economical technologies are needed for flue gas treatment. Emission sources of pollutants are reviewed and different treatment technologies are discussed in this report. (authors)

  7. Treatment of Residual Sodium and Sodium Potassium from Fast Reactors. Review of Recent Accomplishments, Challenges and Technologies

    International Nuclear Information System (INIS)

    2015-08-01

    In addition to the usual radiation and conventional hazards present during the decommissioning of disused nuclear installations, the presence of residual sodium or the alloy sodium potassium — used in primary, secondary and support systems in reactors using liquid metal as a coolant — presents additional technical, safety and cost challenges for decommissioning. This results from the propensity of these materials to react exothermically with water and moisture in the air potentially resulting in toxic and explosive reactionsThis publication discusses a variety of treatment methods to be considered when dismantling components that still contain residual quantities of sodium or sodium potassium, several of which were presented as contributed papers to the IAEA session during the 5. International Conference and Exhibition on Decommissioning Challenges, in Avignon, France, 7–11 April 2013. The publication provides a synthesis of information presented during the session, which was developed further at a consultants meeting held in Vienna, 2–6 December 2013. Decommissioning challenges faced at eight different facilities in five different countries are discussed, as well as the achievements and lessons learned that are of value to the worldwide decommissioning community

  8. Cellulose Nanomaterials in Water Treatment Technologies

    Science.gov (United States)

    Carpenter, Alexis Wells; de Lannoy, Charles François; Wiesner, Mark R.

    2015-01-01

    Cellulose nanomaterials are naturally occurring with unique structural, mechanical and optical properties. While the paper and packaging, automotive, personal care, construction, and textiles industries have recognized cellulose nanomaterials’ potential, we suggest cellulose nanomaterials have great untapped potential in water treatment technologies. In this review, we gather evidence of cellulose nanomaterials’ beneficial role in environmental remediation and membranes for water filtration, including their high surface area-to-volume ratio, low environmental impact, high strength, functionalizability, and sustainability. We make direct comparison between cellulose nanomaterials and carbon nanotubes (CNTs) in terms of physical and chemical properties, production costs, use and disposal in order to show the potential of cellulose nanomaterials as a sustainable replacement for CNTs in water treatment technologies. Finally, we comment on the need for improved communication and collaboration across the myriad industries invested in cellulose nanomaterials production and development to achieve an efficient means to commercialization. PMID:25837659

  9. Cellulose nanomaterials in water treatment technologies.

    Science.gov (United States)

    Carpenter, Alexis Wells; de Lannoy, Charles-François; Wiesner, Mark R

    2015-05-05

    Cellulose nanomaterials are naturally occurring with unique structural, mechanical and optical properties. While the paper and packaging, automotive, personal care, construction, and textiles industries have recognized cellulose nanomaterials' potential, we suggest cellulose nanomaterials have great untapped potential in water treatment technologies. In this review, we gather evidence of cellulose nanomaterials' beneficial role in environmental remediation and membranes for water filtration, including their high surface area-to-volume ratio, low environmental impact, high strength, functionalizability, and sustainability. We make direct comparison between cellulose nanomaterials and carbon nanotubes (CNTs) in terms of physical and chemical properties, production costs, use and disposal in order to show the potential of cellulose nanomaterials as a sustainable replacement for CNTs in water treatment technologies. Finally, we comment on the need for improved communication and collaboration across the myriad industries invested in cellulose nanomaterials production and development to achieve an efficient means to commercialization.

  10. Conceptual Thermal Treatment Technologies Feasibility Study

    International Nuclear Information System (INIS)

    Suer, A.

    1996-01-01

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects

  11. Membrane technology revolutionizes water treatment.

    Science.gov (United States)

    Wilderer, P A; Paris, S

    2007-01-01

    Membranes play a crucial role in living cells, plants and animals. They not only serve as barriers between the inside and outside world of cells and organs. More importantly, they are means of selective transport of materials and host for biochemical conversion. Natural membrane systems have demonstrated efficiency and reliability for millions of years and it is remarkable that most of these systems are small, efficient and highly reliable even under rapidly changing ambient conditions. Thus, it appears to be advisable for technology developers to keep a close eye on Mother Nature. By doing so it is most likely that ideas for novel technical solutions are born. Following the concept of natural systems it is hypothesized that the Millennium Development Goals can be best met when counting on small water and wastewater treatment systems. The core of such systems could be membranes in which chemical reactions are integrated allowing recovery and direct utilization of valuable substances.

  12. Microturbine Power Conversion Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    Staunton, R.H.

    2003-07-21

    In this study, the Oak Ridge National Laboratory (ORNL) is performing a technology review to assess the market for commercially available power electronic converters that can be used to connect microturbines to either the electric grid or local loads. The intent of the review is to facilitate an assessment of the present status of marketed power conversion technology to determine how versatile the designs are for potentially providing different services to the grid based on changes in market direction, new industry standards, and the critical needs of the local service provider. The project includes data gathering efforts and documentation of the state-of-the-art design approaches that are being used by microturbine manufacturers in their power conversion electronics development and refinement. This project task entails a review of power converters used in microturbines sized between 20 kW and 1 MW. The power converters permit microturbine generators, with their non-synchronous, high frequency output, to interface with the grid or local loads. The power converters produce 50- to 60-Hz power that can be used for local loads or, using interface electronics, synchronized for connection to the local feeder and/or microgrid. The power electronics enable operation in a stand-alone mode as a voltage source or in grid-connect mode as a current source. Some microturbines are designed to automatically switch between the two modes. The information obtained in this data gathering effort will provide a basis for determining how close the microturbine industry is to providing services such as voltage regulation, combined control of both voltage and current, fast/seamless mode transfers, enhanced reliability, reduced cost converters, reactive power supply, power quality, and other ancillary services. Some power quality improvements will require the addition of storage devices; therefore, the task should also determine what must be done to enable the power conversion circuits to

  13. Liquid Radioactive Wastes Treatment: A Review

    Directory of Open Access Journals (Sweden)

    Yung-Tse Hung

    2011-05-01

    Full Text Available Radioactive wastes are generated during nuclear fuel cycle operation, production and application of radioisotope in medicine, industry, research, and agriculture, and as a byproduct of natural resource exploitation, which includes mining and processing of ores, combustion of fossil fuels, or production of natural gas and oil. To ensure the protection of human health and the environment from the hazard of these wastes, a planned integrated radioactive waste management practice should be applied. This work is directed to review recent published researches that are concerned with testing and application of different treatment options as a part of the integrated radioactive waste management practice. The main aim from this work is to highlight the scientific community interest in important problems that affect different treatment processes. This review is divided into the following sections: advances in conventional treatment of aqueous radioactive wastes, advances in conventional treatment of organic liquid wastes, and emerged technological options.

  14. Guide to treatment technology for contaminated soils

    International Nuclear Information System (INIS)

    Tran, H.; Aylward, R.

    1992-01-01

    This document is a guide for the screening of alternative treatment technologies for contaminated soils. The contents of this guide are organized into: 1. Introduction, II. Utilizing the table, III. Tables: Contamination Versus Technology, TV. Contaminant Waste Groups, and V. References. The four Contaminations Versus Technology tables are designed to identify the effectiveness and/or potential applicability of technologies to some or all compounds within specific waste groups. The tables also present limitations and special use considerations for the particular treatment technology. The phase of development of the technology is also included in the table. The phases are: Available, Innovative, and Emerging technologies. The technologies presented in this guide are organized according to the method of treatment. The four (4) treatment methods are Biological, Solidification/Stabilization, Thermal, and Chemical/Physical Treatment. There are several processing methods; some are well developed and proven, and others are in the development stage

  15. WATER MICROPOLLUTANTS: CLASSIFICATION AND TREATMENT TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Yolanda Patiño

    2014-06-01

    Full Text Available This article reviews the different kinds of emerging contaminants, their origin and use, and their presence in the Spanish waters, both in surface and groundwater. Micropollutants are compounds of different origin and chemical nature which had been unnoticed (due to their low concentration and don’t have specific regulation. They are divided into six major groups, and many of them behave as endocrine disruptors causing large negative effects on human health and environment. They are in waters because the waste water treatment plants are not designed for their removal, so they are being discharged. Different alternatives for their removal are discussed - physico- chemical, biological and hybrid treatment technologies -. Among the physicochemical process, the advance oxidation processes (AOPs are very promising.

  16. 2017 Building Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-11-01

    The 2017 Building Technologies Office Peer Review Report summarizes the feedback submitted by reviewers for the 109 Building Technologies Office (BTO) projects presented at the 2017 BTO Peer Review. The report presents an overview of the goals and activities under each technology program area, a summary of project scores for each program, and a brief analysis of general evaluation trends within each program area or its constituent subprograms.

  17. Systematic review of catatonia treatment

    Directory of Open Access Journals (Sweden)

    Pelzer ACM

    2018-01-01

    Full Text Available Anne CM Pelzer,1 Frank MMA van der Heijden,2 Erik den Boer3 1Department of Psychiatry, Reinier van Arkel, ‘s-Hertogenbosch, 2Department of Psychiatry, Vincent van Gogh Institute for Psychiatry, Venlo, 3Department of Psychiatry, GGzE, Eindhoven, the Netherlands Objective: To investigate the evidence-based treatment of catatonia in adults. The secondary aim is to develop a treatment protocol. Materials and methods: A systematic review of published treatment articles (case series, cohort or randomized controlled studies which examined the effects of particular interventions for catatonia and/or catatonic symptoms in adult populations and used valid outcome measures was performed. The articles for this review were selected by searching the electronic databases of the Cochrane Library, MEDLINE, EMBASE and PSYCHINFO. Results: Thirty-one articles met the inclusion criteria. Lorazepam and electroconvulsive therapy (ECT proved to be the most investigated treatment interventions. The response percentages in Western studies varied between 66% and 100% for studies with lorazepam, while in Asian and Indian studies, they were 0% and 100%. For ECT, the response percentages are 59%–100%. There does not seem to be evidence for the use of antipsychotics in catatonic patients without any underlying psychotic disorder. Conclusion: Lorazepam and ECT are effective treatments for which clinical evidence is found in the literature. It is not possible to develop a treatment protocol because the evidence for catatonia management on the basis of the articles reviewed is limited. Stringent treatment studies on catatonia are warranted. Keywords: review, catatonia, therapeutics, electroconvulsive therapy, benzodiazepines, lorazepam, ECT

  18. Cost of New Technologies in Prostate Cancer Treatment: Systematic Review of Costs and Cost Effectiveness of Robotic-assisted Laparoscopic Prostatectomy, Intensity-modulated Radiotherapy, and Proton Beam Therapy.

    Science.gov (United States)

    Schroeck, Florian Rudolf; Jacobs, Bruce L; Bhayani, Sam B; Nguyen, Paul L; Penson, David; Hu, Jim

    2017-11-01

    Some of the high costs of robot-assisted radical prostatectomy (RARP), intensity-modulated radiotherapy (IMRT), and proton beam therapy may be offset by better outcomes or less resource use during the treatment episode. To systematically review the literature to identify the key economic trade-offs implicit in a particular treatment choice for prostate cancer. We systematically reviewed the literature according to the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) statement and protocol. We searched Medline, Embase, and Web of Science for articles published between January 2001 and July 2016, which compared the treatment costs of RARP, IMRT, or proton beam therapy to the standard treatment. We identified 37, nine, and three studies, respectively. RARP is costlier than radical retropubic prostatectomy for hospitals and payers. However, RARP has the potential for a moderate cost advantage for payers and society over a longer time horizon when optimal cancer and quality-of-life outcomes are achieved. IMRT is more expensive from a payer's perspective compared with three-dimensional conformal radiotherapy, but also more cost effective when defined by an incremental cost effectiveness ratio new versus traditional technologies is costlier. However, given the low quality of evidence and the inconsistencies across studies, the precise difference in costs remains unclear. Attempts to estimate whether this increased cost is worth the expense are hampered by the uncertainty surrounding improvements in outcomes, such as cancer control and side effects of treatment. If the new technologies can consistently achieve better outcomes, then they may be cost effective. We review the cost and cost effectiveness of robot-assisted radical prostatectomy, intensity-modulated radiotherapy, and proton beam therapy in prostate cancer treatment. These technologies are costlier than their traditional counterparts. It remains unclear whether their use is associated

  19. An overview of in situ waste treatment technologies

    International Nuclear Information System (INIS)

    Walker, S.; Hyde, R.A.; Piper, R.B.; Roy, M.W.

    1992-01-01

    In situ technologies are becoming an attractive remedial alternative for eliminating environmental problems. In situ treatments typically reduce risks and costs associated with retrieving, packaging, and storing or disposing-waste and are generally preferred over ex situ treatments. Each in situ technology has specific applications, and, in order to provide the most economical and practical solution to a waste problem, these applications must be understood. This paper presents an overview of thirty different in situ remedial technologies for buried wastes or contaminated soil areas. The objective of this paper is to familiarize those involved in waste remediation activities with available and emerging in situ technologies so that they may consider these options in the remediation of hazardous and/or radioactive waste sites. Several types of in situ technologies are discussed, including biological treatments, containment technologies, physical/chemical treatments, solidification/stabilization technologies, and thermal treatments. Each category of in situ technology is briefly examined in this paper. Specific treatments belonging to these categories are also reviewed. Much of the information on in situ treatment technologies in this paper was obtained directly from vendors and universities and this information has not been verified

  20. Mozambique Science, Technology and Innovation Review | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project aims to strengthen the capacity of the Mozambique Ministry of Science and Technology (MOST) to govern the country's science, technology and innovation (STI) system, and of researchers and policymakers to conduct systematic reviews of STI policy implementation. It will do so by supporting a review of the ...

  1. Review of Desiccant Dehumidification Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, A. A.

    1994-10-01

    This paper overviews applications of desiccant technology for dehumidifying commercial and institutional buildings. Because of various market, policy, and regulatory factors, this technology is especially attractive for dehumidification applications in the I990s.

  2. Technologies 1995: environment and wastes treatment

    International Nuclear Information System (INIS)

    Anon.

    1995-03-01

    From new technical or scientific developments, new products launching, and markets evolutions, this catalog gives informations selection on research and development projects, new fabrication processes, activities and plants strategies, licences or technology transfers opportunities. The covered fields are: atmospheric pollution controls, water and liquid wastes treatment, polluted soils treatments, noise and odors treatments, municipal and industrial wastes treatments (metal, plastic, paper, glass), clean materials and technologies, radioactive wastes, and european cooperation programs. (A.B.)

  3. 2016 Building Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Building Technologies Office

    2016-12-01

    The 2016 Building Technologies Office Peer Review Report summarizes the feedback submitted by reviewers of the 67 BTO projects presented at the 2016 BTO Peer Review. The report presents an overview of the goals and activities under each technology program area, a summary of project scores for each program, and a brief analysis of general evaluation trends within each program area or its constituent subprograms.

  4. Surgical treatment of Chiari malformation: review and progress

    Directory of Open Access Journals (Sweden)

    ZHANG Yuan-zheng

    2012-08-01

    Full Text Available The surgical treatment of Chiari malformation (CM began in 1932. With the advance of medical technology, the surgical technique of CM is also in constant improvement. But due to its pathogenesis has not yet clear, there is no accepted optimal method, and different levels of the operation is still controversial. The author reviewed the concept, pathogenesis, diagnosis and surgical treatment of CM. The hot topics and new technological application were also reviewed in this article.

  5. Nuclear technology review 2005 update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-08-15

    The year 2004 marked the 50th anniversary of civilian nuclear power generation. While the current outlook for nuclear energy remains mixed, there is clearly a sense of rising expectations. Both the OECD International Energy Agency and the IAEA adjusted their medium-term projections for nuclear power upwards. The IAEA now projects 423 - 592 GW(e) of nuclear power installed worldwide in 2030, compared to 366 GW(e) at the end of 2004. This is driven by nuclear power's performance record, by growing energy needs around the world coupled with rising oil and natural gas prices, by new environmental constraints including entry-into-force of the Kyoto Protocol, by concerns about energy supply security in a number of countries, and by ambitious expansion plans in several key countries. National research on advanced reactor designs continues on all reactor categories - water cooled, gas cooled, liquid metal cooled, and hybrid systems. Five members of the US-initiated Generation IV International Forum (GIF) signed a framework agreement on international collaboration in research and development on Generation IV nuclear energy systems in February 2005. The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 23 members. It completed a series of case studies testing its assessment methodology and the final report on the updated INPRO methodology was published in December. The realization of the International Thermonuclear Experimental Reactor, ITER, came closer with the announcement on 28 June 2005 by the ITER parties. The aim of ITER is to demonstrate the scientific and technological feasibility of fusion energy by constructing a functional fusion power plant. Nuclear technology developments are rapid and cover many fields of application. Not all can be covered in this update review, but certain key areas and trends are covered where these are seen to be of significant interest to IAEA Member States, and which are of relevance to and have

  6. Nuclear technology review 2005 update

    International Nuclear Information System (INIS)

    2005-08-01

    The year 2004 marked the 50th anniversary of civilian nuclear power generation. While the current outlook for nuclear energy remains mixed, there is clearly a sense of rising expectations. Both the OECD International Energy Agency and the IAEA adjusted their medium-term projections for nuclear power upwards. The IAEA now projects 423 - 592 GW(e) of nuclear power installed worldwide in 2030, compared to 366 GW(e) at the end of 2004. This is driven by nuclear power's performance record, by growing energy needs around the world coupled with rising oil and natural gas prices, by new environmental constraints including entry-into-force of the Kyoto Protocol, by concerns about energy supply security in a number of countries, and by ambitious expansion plans in several key countries. National research on advanced reactor designs continues on all reactor categories - water cooled, gas cooled, liquid metal cooled, and hybrid systems. Five members of the US-initiated Generation IV International Forum (GIF) signed a framework agreement on international collaboration in research and development on Generation IV nuclear energy systems in February 2005. The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) grew to 23 members. It completed a series of case studies testing its assessment methodology and the final report on the updated INPRO methodology was published in December. The realization of the International Thermonuclear Experimental Reactor, ITER, came closer with the announcement on 28 June 2005 by the ITER parties. The aim of ITER is to demonstrate the scientific and technological feasibility of fusion energy by constructing a functional fusion power plant. Nuclear technology developments are rapid and cover many fields of application. Not all can be covered in this update review, but certain key areas and trends are covered where these are seen to be of significant interest to IAEA Member States, and which are of relevance to and have

  7. Testing for Nuclear Thermal Propulsion Systems: Identification of Technologies for Effluent Treatment in Test Facilities

    Data.gov (United States)

    National Aeronautics and Space Administration — Key steps to ensure identification of relevant effluent treatment technologies for Nuclear Thermal Propulsion (NTP) testing include the following. 1. Review of...

  8. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  9. New nuclear technology; International developments. Review 1995

    International Nuclear Information System (INIS)

    Devell, L.; Aggeryd, I.; Hultgren, Aa.; Lundell, B.; Pedersen, T.

    1995-09-01

    A summary review of the development of new nuclear rector technology is presented in this report. Fuel cycle strategies and waste handling developments are also commented. Different plans for dismantling nuclear weapons are presented. 18 refs

  10. 2013 Bioenergy Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2014-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2013 U.S. Department of Energy Bioenergy Technologies Office's Peer Review meeting.

  11. Geothermal Technologies Program Overview - Peer Review Program

    Energy Technology Data Exchange (ETDEWEB)

    Milliken, JoAnn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-06

    This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

  12. [Application of three-dimensional digital technology in the diagnosis and treatment planning in orthodontics].

    Science.gov (United States)

    Bai, Y X

    2016-06-01

    Three-dimensional(3D)digital technology has been widely used in the field of orthodontics in clinical examination, diagnosis, treatment and curative effect evaluation. 3D digital technology greatly improves the accuracy of diagnosis and treatment, and provides effective means for personalized orthodontic treatment. This review focuses on the application of 3D digital technology in the field of orthodontics.

  13. Treatment of mezcal vinasses: a review.

    Science.gov (United States)

    Robles-González, Vania; Galíndez-Mayer, Juvencio; Rinderknecht-Seijas, Noemí; Poggi-Varaldo, Héctor M

    2012-02-20

    Mexican distilleries produce near eight million liters of mezcal per year, and generate about 90 million liters of mezcal vinasses (MV). This acidic liquid waste is very aggressive to the environment because of its high content of toxic and recalcitrant organic matter. As a result, treatment is necessary before discharge to water bodies. It is interesting, yet disturbing; verify that there is a significant gap on the treatment of MV. However, there is an abundant body of research on treatment of other recalcitrant toxic effluents that bear some similarity to MV, for example, wine vinasse, vinasses from the sugar industry, olive oil, and industrial pulp and paper wastewaters. The objective of this review is to critically organize the treatment alternatives of MV, assess their relative advantages and disadvantages, and finally detect the trends for future research and development. Experience with treatment of this set of residuals, indicates the following trends: (i) anaerobic digestion, complemented by oxidative chemical treatments (e.g. ozonation) are usually placed as pretreatments, (ii) aerobic treatment alone and combined with ozone which have been directed to remove phenolic compounds and color have been successfully applied, (iii) physico-chemical treatments such as Fenton, electro-oxidation, oxidants and so on., which are now mostly at lab scale stage, have demonstrated a significant removal of recalcitrant organic compounds, (iv) fungal pretreatment with chemical treatment followed by oxidative (O(3)) or anaerobic digestion, this combination seems to give attractive results, (v) vinasses can be co-composted with solid organic wastes, particularly with those from agricultural activities and agro-industies; in addition to soil amenders with fertilizing value to improve soil quality in typical arid lands where agave is cultivated, it seems to be a low cost technology very well suited for rural regions in underdeveloped countries where more sophisticated

  14. Energy technology review, July--August 1991

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.C. (ed.)

    1991-01-01

    This issue of Energy Technology Review'' gives the annual review of the programs at Lawrence Livermore National Laboratory. This State of the Laboratory issue includes discussions of all major programs: Defense Systems; Laser Research; Magnetic Fusion Energy; Energy and Earth Sciences; Environmental Technology Program; Biomedical and Environmental Science; Engineering; Physics; Chemistry and Materials Science; Computations; and Administrative and Institutional Services. An index is also given of the 1991 achievements with contact names and telephone number.

  15. Glaucoma treatment trends: a review.

    Science.gov (United States)

    Conlon, Ronan; Saheb, Hady; Ahmed, Iqbal Ike K

    2017-02-01

    Glaucoma is one of the most common causes of blindness worldwide, and its prevalence is increasing. The aim of the present review is to describe the current medical and surgical treatment trends in the management of open-angle glaucoma. There has been an increase in the availability of glaucoma medications and the use of laser trabeculoplasty over the past decade, with a subsequent decrease in invasive incisional surgery. In addition, a new class of glaucoma procedures, termed microinvasive glaucoma surgery, has emerged, which aims to fill the gap between conservative medical management and more invasive surgery. Copyright © 2017 Canadian Ophthalmological Society. Published by Elsevier Inc. All rights reserved.

  16. Innovative hazardous waste treatment technology

    International Nuclear Information System (INIS)

    Freeman, H.M.; Sferra, P.R.

    1990-01-01

    This book contains 21 various biodegradation techniques for hazardous waste treatment. Topics include: cyclic vertical water table movement for enhancement of in situ biodegradation of diesel fuel; enhanced biodegradation of petroleum hydrocarbons; and evaluation of aeration methods to bioremediate fuel-contaminated soils

  17. Membrane technology water treatment facility

    International Nuclear Information System (INIS)

    Gruzdev, E. N.; Starikov, E.N.

    2009-01-01

    The suggested technical solution, in contrast with the traditional treatment methods using pressure filtration and sorption cleaning, can be applied with minimal used for equipment, stable production and the use of reagents, prevention of the formation of waste water with high mineral content and avoid the need for neutralization of the main stream of waste water

  18. Hazards Control Department annual technology review, 1984

    International Nuclear Information System (INIS)

    Griffith, R.V.; Anderson, K.J.

    1985-01-01

    The Annual Technology Review covers the period from October 1983 to September 1984. Topics reviewed include Nuclear Criticality Information System, nuclear dosimetry, personnel dosimetry, laser chemistry, electric filters and neutron spectrometry. Individual papers are indexed and abstracted for the data base. (DT)

  19. State of the technology review

    International Nuclear Information System (INIS)

    Spino, J.

    1998-01-01

    This paper presents a review of different behaviours of fuel elements in relation to fission gases. The influence of the fission gas level and its location regarding differential fuel structures is commented. The gas release process at high burnup is described and some topics that need to be further investigated are suggested. (author)

  20. Incineration and flue gas treatment technologies

    International Nuclear Information System (INIS)

    1997-01-01

    The proceedings are presented of an international symposium on Incineration and Flue Gas Treatment Technologies, held at Sheffield University in July 1997. Papers from each of the six sessions cover the behaviour of particles in incinerator clean-up systems, pollution control technologies, the environmental performance of furnaces and incinerators, controlling nitrogen oxide emissions, separation processes during flue gas treatment and regulatory issues relating to these industrial processes. (UK)

  1. Review of nonconventional bioreactor technology

    Energy Technology Data Exchange (ETDEWEB)

    Turick, C.E.; Mcllwain, M.E.

    1993-09-01

    Biotechnology will significantly affect many industrial sectors in the future. Industrial sectors that will be affected include pharmaceutical, chemical, fuel, agricultural, and environmental remediation. Future research is needed to improve bioprocessing efficiency and cost-effectiveness in order to compete with traditional technologies. This report describes recent advances in bioprocess technologies and bioreactor designs and relates them to problems encountered in many industrial bioprocessing operations. The primary focus is directed towards increasing gas and vapor transfer for enhanced bioprocess kinetics as well as unproved by-product separation and removal. The advantages and disadvantages of various conceptual designs such as hollow-fiber, gas-phase, hyperbaric/hypobaric, and electrochemical bioreactors are also discussed. Specific applications that are intended for improved bioprocesses include coal desulfurization, coal liquefaction, soil bioremediation, biomass conversion to marketable chemicals, biomining, and biohydrometallurgy as well as bioprocessing of gases and vapors.

  2. Science & Technology Review September 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-07-24

    This month's issue has the following articles: (1) Remembering the Laboratory's First Director - Commentary by Harold Brown; (2) Herbert F. York (1921-2009): A Life of Firsts, an Ambassador for Peace - The Laboratory's first director, who died on May 19, 2009, used his expertise in science and technology to advance arms control and prevent nuclear war; (3) Searching for Life in Extreme Environments - DNA will help researchers discover new marine species and prepare to search for life on other planets; (4) Energy Goes with the Flow - Lawrence Livermore is one of the few organizations that distills the big picture about energy resources and use into a concise diagram; and (5) The Radiant Side of Sound - An experimental method that converts sound waves into light may lead to new technologies for scientific and industrial applications.

  3. Solar based water treatment technologies

    International Nuclear Information System (INIS)

    Ahmad, I.; Hyder, M.J.

    2000-01-01

    In developing countries, the quality of drinking water is so poor that reports of 80% diseases from water-related causes is no surprise (Tebbet, 90). Frequently, there are reports in press of outbreak of epidemics in cities due to the unhygienic drinking-water. The state of affairs in the rural areas can be well imagined, where majority of the people live with no piped water. This paper describes the solar-based methods of removing organic pollutants from waste-water (also called Advanced Oxidation Technologies) and solar desalination. Experimental results of a simple solar water-sterilization technique have been discussed, along with suggestions to enhance the performance of this technique. (author)

  4. TREATMENT OF PERIPARTUM CARDIOMYOPATHY (REVIEW

    Directory of Open Access Journals (Sweden)

    N. T. Vatutin

    2017-01-01

    Full Text Available The presented review concerns discussion about current insights into treatment of peripartum cardiomyopathy. The definition of peripartum cardiomyopathy and general issues about diagnosis and pathogenesis of the disorder are provided at the head of the review. Particularly, the role of the system «prolactin — cathepsin D — prolactin 16 kDa» in cardiomyopathy development is disclosed. The general approaches to management of the patients are highlighted. The review provides detailed data about indications, adverse effects and derived clinical experience concerning the main pharmacological drugs which had been used in peripartum cardiomyopathy treatment given their possible unfavorable influence on fetus maturation and maternal lactation. The detailed description is provided on diuretics including loop, thiazide and potassium-sparing drugs. It was noted relative safety and efficiency of nitrates and hydralazine in conditions of limited choice from vasodilator group and, particularly, angiotensinconverting-enzyme inhibitors and angiotensin-II receptor blockers which are contraindicated in pregnancy. A special attention is paid to the group of inotropic drugs: levosimendan, milrinone, and cardiac glycosides. The role of β-blockers and ivabradine is disclosed in heart failure treatment of peripartum cardiomyopathy. Anticoagulants were presented in details given that these drugs are justified in severe cardiac chambers dilation, decrease in ejection fraction, and in presence of intracardiac thrombosis. The place of antiarrhythmic drugs administrating in various cardiac rhythm disorders is discussed in the review. The data is given with account of potential influence on fetus in antenatal peripartum cardiomyopathy in which lidocaine and sotalol are the most preferable drugs; adenosine, quinidine, and flecainide are useful with caution, but amiodarone and dronedarone are absolutely contraindicated. Taking into account proposed pathogenic

  5. Review of Potential Wind Tunnel Balance Technologies

    Science.gov (United States)

    Burns, Devin E.; Williams, Quincy L.; Phillips, Ben D.; Commo, Sean A.; Ponder, Jonathon D.

    2016-01-01

    This manuscript reviews design, manufacture, materials, sensors, and data acquisition technologies that may benefit wind tunnel balances for the aerospace research community. Current state-of-the-art practices are used as the benchmark to consider advancements driven by researcher and facility needs. Additive manufacturing is highlighted as a promising alternative technology to conventional fabrication and has the potential to reduce both the cost and time required to manufacture force balances. Material alternatives to maraging steels are reviewed. Sensor technologies including piezoresistive, piezoelectric, surface acoustic wave, and fiber optic are compared to traditional foil based gages to highlight unique opportunities and shared challenges for implementation in wind tunnel environments. Finally, data acquisition systems that could be integrated into force balances are highlighted as a way to simplify the user experience and improve data quality. In summary, a rank ordering is provided to support strategic investment in exploring the technologies reviewed in this manuscript.

  6. Leveraging technology to enhance addiction treatment and recovery.

    Science.gov (United States)

    Marsch, Lisa A

    2012-01-01

    Technology such as the Internet and mobile phones offers considerable promise for affecting the assessment, prevention, and treatment of and recovery from substance use disorders. Technology may enable entirely new models of behavioral health care within and outside of formal systems of care. This article reviews the promise of technology-based therapeutic tools for affecting the quality and reach of addiction treatment and recovery support systems, as well as the empirical support to date for this approach. Potential models for implementing technology-based interventions targeting substance use disorders are described. Opportunities to optimize the effectiveness and impact of technology-based interventions targeting addiction and recovery, along with outstanding research needs, are discussed.

  7. Assisted reproductive technology treatment outcomes.

    LENUS (Irish Health Repository)

    Naasan, M

    2012-05-01

    Information on the outcomes of ART treatments in Ireland is not readily available to Irish practitioners. The data for hospital affiliated clinics has been made available for many years and is included in the hospital reports. We present a 10-year analysis of the Irish ART results voluntarily reported by six out of seven IVF clinics. The data was collected from published ESHRE reports and from results (2007-8) not yet published. Data collected included: number of clinics and ART cycles, female age, clinical and multiple pregnancy rates and treatment complications. The clinical pregnancy rate per embryo transfer was 31.7% for IVF and 29.8% for ICSI. The proportion of singleton, twin and triplet deliveries for IVF and ICSI combined was 75%, 23.35% and 1.64%. The rate of ovarian hyperstimulation was 0.8%. ART practice in Ireland is safe, effective and responsible. Financial and societal savings could result from the introduction of state funded IVF with compulsory eSET where recommended.

  8. An Investigation of Technologies for Hazardous Sludge Reduction at AFLC (Air Force Logistics Command) Industrial Waste Treatment Plants. Volume 2. Literature Review of Available Technologies for Treating Heavy Metal Wastewaters.

    Science.gov (United States)

    1983-12-01

    136 J. Ultrafiltration and Microfiltration . .. .. . .. 139 K. Ferrous Sulfate Reduction ................. 143 L. Integrated Treatment...curative (or restorative ) categories. Some methods fall into both categories. The technologies have 5’. been in use for several decades, but applications... restoring it to operating condition. To aid in determining what purification method to use and to prevent bath misuse a log of bath use is important

  9. Fiber-optic technology review

    International Nuclear Information System (INIS)

    Lyons, P.B.

    1980-01-01

    A history of fiber technology is presented. The advantages of fiber optics are discussed (bandwidth, cost, weight and size, nonmetallic construction and isolation). Some aspects of the disadvantages of fiber systems briefly discussed are fiber and cable availability, fiber components, radiation effects, receivers and transmitters, and material dispersion. Particular emphasis over the next several years will involve development of fibers and systems optimized for use at wavelengths near 1.3 μm and development of wavelengths multiplexers for simultaneous system operation at several wavelengths

  10. Technology assessment of thermal treatment technologies using ORWARE

    International Nuclear Information System (INIS)

    Assefa, G.; Eriksson, O.; Frostell, B.

    2005-01-01

    A technology assessment of thermal treatment technologies for wastes was performed in the form of scenarios of chains of technologies. The Swedish assessment tool, ORWARE, was used for the assessment. The scenarios of chains of thermal technologies assessed were gasification with catalytic combustion, gasification with flame combustion, incineration and landfilling. The landfilling scenario was used as a reference for comparison. The technologies were assessed from ecological and economic points of view. The results are presented in terms of global warming potential, acidification potential, eutrophication potential, consumption of primary energy carriers and welfare costs. From the simulations, gasification followed by catalytic combustion with energy recovery in a combined cycle appeared to be the most competitive technology from an ecological point of view. On the other hand, this alternative was more expensive than incineration. A sensitivity analysis was done regarding electricity prices to show which technology wins at what value of the unit price of electricity (SEK/kW h). Within this study, it was possible to make a comparison both between a combined cycle and a Rankine cycle (a system pair) and at the same time between flame combustion and catalytic combustion (a technology pair). To use gasification just as a treatment technology is not more appealing than incineration, but the possibility of combining gasification with a combined cycle is attractive in terms of electricity production. This research was done in connection with an empirical R and D work on both gasification of waste and catalytic combustion of the gasified waste at the Division of Chemical Technology, Royal Institute of Technology (KTH), Sweden

  11. Integrated thermal treatment systems study. Internal review panel report

    International Nuclear Information System (INIS)

    Cudahy, J.; Escarda, T.; Gimpel, R.

    1995-04-01

    The U.S. Department of Energy (DOE) Office of Technology Development (OTD) commissioned two studies to evaluate nineteen thermal treatment technologies for treatment of DOE mixed low-level waste. These studies were called the Integrated Thermal Treatment System (ITTS) Phase I and Phase II. With the help of the DOE Office of Environmental Management (EM) Mixed Waste Focus Group, OTD formed an ITTS Internal Review Panel to review and comment on the ITTS studies. This Panel was composed of scientists and engineers from throughout the DOE complex, the U.S. Environmental Protection Agency, the California EPA, and private experts. The Panel met from November 15-18, 1994 to review the ITTS studies and to make recommendations on the most promising thermal treatment systems for DOE mixed low-level wastes and on research and development necessary to prove the performance of the technologies. This report describes the findings and presents the recommendations of the Panel

  12. Environmental Consequences of Pig Slurry Treatment Technologies

    DEFF Research Database (Denmark)

    ten Hoeve, Marieke

    occur during manure storage and after field application. The main emissions are ammonia, nitrous oxide, methane, carbon dioxide, nitrate, phosphorus and odour. Slurry treatment technologies have been and are being developed in order to reduce the environmental impacts of manure. However, it is important...... and excluding biogenic carbon, marine and freshwater eutrophication potential, terrestrial acidification and eutrophication potential, and fossil resource depletion potential. The different types of treatment technologies showed varying environmental profiles, meaning that one type of technology was beneficial...... technology, or co-substrate for anaerobic digestion). With respect to odorous emissions, an LCIA method was developed, but due to a lack of data it proved difficult to include odour in LCA. Regulations appear to have an influence on the environmental impacts of slurry treatment. A decrease in N application...

  13. Decision support for redesigning wastewater treatment technologies.

    Science.gov (United States)

    McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

    2014-10-21

    This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

  14. Energy & Technology Review, March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Quirk, W.J.; Canada, J.; de Vore, L.; Gleason, K.; Kirvel, R.D.; Kroopnick, H.; McElroy, L.; Van Dyke, P. [eds.

    1994-03-01

    This monthly report of research activities at Lawrence Livermore Laboratory highlights three different research programs. First, the Forensic Science Center supports a broad range of analytical techniques that focus on detecting and analyzing chemical, biological, and nuclear species. Analyses are useful in the areas of nonproliferation, counterterrorism, and law enforcement. Second, starting in 1977, the laboratory initiated a series of studies to understand a high incidence of melanoma among employees. Continued study shows that mortality from this disease has decreased from the levels seen in the 1980`s. Third, to help coordinate the laboratory`s diverse research projects that can provide better healthcare tools to the public, the lab is creating the new Center for Healthcare Technologies.

  15. Science & Technology Review December 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2007-10-24

    This month's issue has the following articles: (1) Homeland Security Begins Abroad--Commentary by John C. Doesburg; (2) Out of Harm's Way--New physical protection and accountability systems, together with a focus on security, safeguard nuclear materials in the Russian Federation; (3) A Calculated Journey to the Center of the Earth--Determining the permeability of partially melted metals in a mineral matrix unlocks secrets about the formation of Earth's core; (4) Wireless That Works--Communication technologies using ultrawideband radar are improving national security; and (5) Power to the People--Edward Teller envisioned safe and plentiful nuclear power for peaceful applications.

  16. Science & Technology Review March 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2010-01-29

    This month's issue has the following articles: (1) Countering the Growing Chem-Bio Threat -- Commentary by Penrose (Parney) C. Albright; (2) Responding to a Terrorist Attack Involving Chemical Warfare Agents -- Livermore scientists are helping the nation strengthen plans to swiftly respond to an incident involving chemical warfare agents; (3) Revealing the Secrets of a Deadly Disease -- A Livermore-developed system helps scientists better understand how plague bacteria infect healthy host cells; (4) A New Application for a Weapons Code -- Simulations reveal for the first time how blast waves cause traumatic brain injuries; (5) Testing Valuable National Assets for X-Ray Damage -- Experiments at the National Ignition Facility are measuring the effects of radiation on critical systems; and (6) An Efficient Way to Harness the Sun's Power -- New solar thermal technology is designed to supply residential electric power at nearly half of the current retail price.

  17. 2013 Geothermal Technologies Office Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Geothermal Technologies Office

    2014-01-01

    Geothermal Technologies Office conducted its annual program peer review in April of 2013. The review provided an independent, expert evaluation of the technical progress and merit of GTO-funded projects. Further, the review was a forum for feedback and recommendations on future GTO strategic planning. During the course of the peer review, DOE-funded projects were evaluated for 1) their contribution to the mission and goals of the GTO and 2) their progress against stated project objectives. Principal Investigators (PIs) came together in sessions organized by topic “tracks” to disseminate information, progress, and results to a panel of independent experts as well as attendees.

  18. Geothermal Technologies Program 2011 Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Hollett, Douglas [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Stillman, Greg [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-01

    On June 6-10, 2011, the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (GTP or the Program) conducted its annual program peer review in Bethesda, Maryland. In accordance with the EERE Peer Review Guide, the review provides an independent, expert evaluation of the strategic goals and direction of the program and is a forum for feedback and recommendations on future program planning. The purpose of the review was to evaluate DOE-funded projects for their contribution to the mission and goals of the Program and to assess progress made against stated objectives.

  19. Assessing mixed waste treatment technologies

    International Nuclear Information System (INIS)

    Berry, J.B.; Bloom, G.A.; Hart, P.W.

    1994-01-01

    The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). As discussed earlier in this conference MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. During the next 5 years, DOE will manage over 1,200,000 m 3 of MLLW and mixed transuranic (MTRU) waste at 50 sites in 22 states (see Table 1). The difference between MLLW and MTRU waste is in the concentration of elements that have a higher atomic weight than uranium. Nearly all of this waste will be located at 13 sites. More than 1400 individual mixed waste streams exist with different chemical and physical matrices containing a wide range of both hazardous and radioactive contaminants. Their containment and packaging vary widely (e.g., drums, bins, boxes, and buried waste). This heterogeneity in both packaging and waste stream constituents makes characterization difficult, which results in costly sampling and analytical procedures and increased risk to workers

  20. The effectiveness and cost-effectiveness of donepezil, galantamine, rivastigmine and memantine for the treatment of Alzheimer's disease (review of Technology Appraisal No. 111): a systematic review and economic model.

    Science.gov (United States)

    Bond, M; Rogers, G; Peters, J; Anderson, R; Hoyle, M; Miners, A; Moxham, T; Davis, S; Thokala, P; Wailoo, A; Jeffreys, M; Hyde, C

    2012-01-01

    Alzheimer’s disease (AD) is the most commonly occurring form of dementia. It is predominantly a disease of later life, affecting 5% of those over 65 in the UK. Review and update guidance to the NHS in England and Wales on the clinical effectiveness and cost-effectiveness of donepezil, galantamine, rivastigmine [acetylcholinesterase inhibitors (AChEIs)] and memantine within their licensed indications for the treatment of AD, which was issued in November 2006 (amended September 2007 and August 2009). Electronic databases were searched for systematic reviews and/or metaanalyses, randomised controlled trials (RCTs) and ongoing research in November 2009 and updated in March 2010; this updated search revealed no new includable studies. The databases searched included The Cochrane Library (2009 Issue 4, Cochrane Database of Systematic Reviews and Cochrane Central Register of Controlled Trials), MEDLINE, MEDLINE In-Process & Other Non-Indexed Citations, EMBASE, PsycINFO, EconLit, ISI Web of Science Databases--Science Citation Index, Conference Proceedings Citation Index, and BIOSIS; the Centre for Reviews and Dissemination (CRD) databases--NHS Economic Evaluation Database, Health Technology Assessment, and Database of Abstracts of Reviews of Effects. The clinical effectiveness systematic review was undertaken following the principles published by the NHS CRD. We included RCTs whose population was people with AD. The intervention and comparators depended on disease severity, measured by the Mini Mental State Examination (MMSE). mild AD (MMSE 21-26)--donepezil, galantamine and rivastigmine; moderate AD (MMSE 10-20)--donepezil, galantamine, rivastigmine and memantine; severe AD (MMSE 99% probability that the AChEIs are more cost-effective than BSC. These analyses assume that the AChEIs have no effect on survival. For the AChEIs, in people with mild to moderate AD, the probabilistic sensitivity analyses suggested that donepezil is the most cost-effective, with a 28

  1. A novel intranasal breath-powered delivery system for sumatriptan: a review of technology and clinical application of the investigational product AVP-825 in the treatment of migraine.

    Science.gov (United States)

    Cady, Roger

    2015-01-01

    AVP-825, formerly 'OptiNose Sumatriptan,' is an investigational Breath-Powered(TM) Bi-Directional(TM) intranasal delivery system containing low-dose sumatriptan (22 mg intranasal powder) that avoids limitations of other types of intranasal administration by taking advantage of unique features of nasal anatomy and physiology. This review summarizes intranasal drug delivery for migraine, how the breath-powered technology works, and AVP-825 pharmacokinetic, efficacy and safety/tolerability findings. To identify AVP-825 clinical studies, a PubMed/MEDLINE database search was conducted with the terms AVP-825, OptiNose, OptiNose Sumatriptan, Breath-Powered Nasal Delivery or sumatriptan powder. Of 20 articles, 5 clinical studies were identified, including the head-to-head comparative COMPASS trial (AVP-825 vs oral sumatriptan) and two placebo-controlled studies. AVP-825 has faster sumatriptan absorption versus oral tablets or traditional liquid nasal spray. In Phase II/III randomized, double-blind, placebo-controlled trials, AVP-825 produced early and sustained efficacy with minimal triptan-related adverse effects. In COMPASS, AVP-825 produced earlier reduction of migraine pain intensity and migraine-associated symptoms than 100 mg oral sumatriptan, and higher early rates of pain relief and pain freedom, similar sustained efficacy, and fewer atypical sensations. AVP-825 has the potential to provide migraine patients with improved intranasal administration of sumatriptan that may enhance efficacy and tolerability.

  2. Plasma technology for treatment of waste

    Energy Technology Data Exchange (ETDEWEB)

    Cohn, D [Massachusetts Inst. of Technology, Cambridge, MA (United States). Plasma Fusion Center

    1997-12-31

    Meeting goals for waste cleanup will require new technology with improved environmental attractiveness and reduced cost. Plasma technology appears promising because of the high degree of controllability; capability to process waste without the adverse effects of combustion; and a very wide temperature range of operation. At the Plasma Fusion Center at the Massachusetts Institute of Technology, a range of plasma technologies are being investigated. `Hot` thermal plasmas produced by DC arc technology are being examined for treatment of solid waste. In conjunction with this activity, new diagnostics are being developed for monitoring arc furnace operating parameters and gaseous emissions. Electron-beam generated plasma technology is being investigated as a means of producing non-thermal `cold` plasmas for selective processing of dilute concentrations of gaseous waste. (author). 4 figs., 5 refs.

  3. Review on postharvest technology of banana fruit

    African Journals Online (AJOL)

    mu

    2013-02-13

    Feb 13, 2013 ... The aim of this review is in threefold: First, to explore the effect of different preharvest treatments on postharvest ... biochemical changes in banana during development, maturation, ripening and storage were reviewed. Third, postharvest ..... at full mature stage for local domestic market (Gowen,. 1995).

  4. Science & Technology Review June 2012

    Energy Technology Data Exchange (ETDEWEB)

    Poyneer, L A

    2012-04-20

    This month's issue has the following articles: (1) A New Era in Climate System Analysis - Commentary by William H. Goldstein; (2) Seeking Clues to Climate Change - By comparing past climate records with results from computer simulations, Livermore scientists can better understand why Earth's climate has changed and how it might change in the future; (3) Finding and Fixing a Supercomputer's Faults - Livermore experts have developed innovative methods to detect hardware faults in supercomputers and help applications recover from errors that do occur; (4) Targeting Ignition - Enhancements to the cryogenic targets for National Ignition Facility experiments are furthering work to achieve fusion ignition with energy gain; (5) Neural Implants Come of Age - A new generation of fully implantable, biocompatible neural prosthetics offers hope to patients with neurological impairment; and (6) Incubator Busy Growing Energy Technologies - Six collaborations with industrial partners are using the Laboratory's high-performance computing resources to find solutions to urgent energy-related problems.

  5. Science and Technology Review October/November 2011

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, Rebecca J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-08-25

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. This is the October/November 2011 issue, with the cover story being "Proton Therapy Advances Cancer Treatment."

  6. Soil treatment technologies: Comparison of field experiences

    International Nuclear Information System (INIS)

    Hodges, H.I.; Jackson, D.W.; Kline, K.

    1992-01-01

    A number of on-site soil treatment technologies are available for closure of oil-field waste pits, leaking underground storage tank (LUST) sites, and general hydrocarbon contamination. This paper will contrast Separation Systems Consultants, Inc.'s (SSCI's) field experiences with the following soil restoration techniques: (1) Land Treatment using indigenous microbes; (2) Land Farming using commercial microbes; (3) Low Temperature Thermal Treatment; (4) Solidification. The technologies will be contrasted in terms of regulatory constraints and requirements, key set-up and maintenance consideration, selection factors. Included in the regulatory contrast is the authors' perception of regulatory attitudes toward the techniques. Because this paper is based on actual field experience and projects, the practical aspects of making the technologies work is emphasized

  7. Science & Technology Review January/February 2017

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, R. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-01-12

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  8. Science & Technology Review October/November 2015

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-11-05

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  9. Review of infrared scene projector technology-1993

    Science.gov (United States)

    Driggers, Ronald G.; Barnard, Kenneth J.; Burroughs, E. E.; Deep, Raymond G.; Williams, Owen M.

    1994-07-01

    The importance of testing IR imagers and missile seekers with realistic IR scenes warrants a review of the current technologies used in dynamic infrared scene projection. These technologies include resistive arrays, deformable mirror arrays, mirror membrane devices, liquid crystal light valves, laser writers, laser diode arrays, and CRTs. Other methods include frustrated total internal reflection, thermoelectric devices, galvanic cells, Bly cells, and vanadium dioxide. A description of each technology is presented along with a discussion of their relative benefits and disadvantages. The current state of each methodology is also summarized. Finally, the methods are compared and contrasted in terms of their performance parameters.

  10. Science & Technology Review January/February 2016

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-18

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  11. Treatment Approaches in Down's Syndrome: A Review.

    Science.gov (United States)

    Foreman, Philip J.; Ward, James

    1986-01-01

    The paper reviews research into treatment approaches in Down's Syndrome. Pharmacological treatments reviewed include thyroid therapy, 5-hydroxytryptophan, vitamin therapy, and cell therapy. Other treatments considered are movement patterning, early intervention, and facial surgery. Early educational intervention is seen as the most effective…

  12. Selection of technologies for municipal wastewater treatment

    Directory of Open Access Journals (Sweden)

    Juan Pablo Rodríguez Miranda

    2015-11-01

    Full Text Available In water environmental planning in watersheds should contain aspects for the decontamination of receiving water body, therefore the selection of the treatment plants municipal wastewater in developing countries, you should consider aspects of the typical composition raw wastewater pollutant removal efficiency by technology, performance indicators for technology, environmental aspects of localization and spatial localization strategy. This methodology is built on the basis of technical, economic and environmental attributes, such as a tool for decision making future investments in treatment plants municipal wastewater with multidisciplinary elements.

  13. Application of radiation technology to sewage sludge processing: A review

    International Nuclear Information System (INIS)

    Wang Jianlong; Wang Jiazhuo

    2007-01-01

    Sewage sludge is unwanted residual solid wastes generated in wastewater treatment and its management is one of the most critical environmental issues of today. The treatment and disposal of sludge contribute a considerable proportion of the cost for running a wastewater treatment plant. The increasing amount of swage sludge and more and more legislative regulation of its disposal have stimulated the need for developing new technologies to process sewage sludge efficiently and economically. One ideal consideration is to recycle it after proper treatment. Radiation technology is regarded to be a promising alternative for its high efficiency in pathogen inactivation, organic pollutants oxidation, odor nuisance elimination and some other characteristics enhancement, which will facilitate the down-stream process of sludge treatment and disposal. Here we present a brief review of application of radiation technology on sewage sludge processing. Some basic information of two currently available irradiation systems and fundamental radiation chemistry are introduced firstly; then the world-wide application of this promising technology is reviewed; various effects of radiation on sludge is discussed in detail; and some concluding remarks are given and some future directions are also proposed

  14. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2007-01-01

    , which includes technical, economic and environmental aspects. The technical and economic assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, Membrane Bioreactor (MBR), and UV in combination......As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment...... with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

  15. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2008-01-01

    , which includes technical, economical and environmental aspects. The technical and economical assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, membrane bioreactor (MBR) and UV in combination......As a consequence of the EU Water Framework Directive more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advanced treatment technologies. This paper describes a holistic assessment...... with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

  16. Review of containment vent filter technology

    International Nuclear Information System (INIS)

    Kovach, J.L.

    1989-01-01

    The technology applied for the design and construction of containment vent filters is compiled and reviewed. The national positions leading to the selection of venting or method of filtration are extracted from position papers. Several areas of further information needs are identified

  17. Book review Information and Communication Technologies for ...

    African Journals Online (AJOL)

    Book review. Information and Communication Technologies for Development in Africa: Volume 2. The Experience with Community Telecentres By Florence Etta and Sheila Parvyn-Wamahiu (2003). Kibet A Ngetich. Abstract. No Abstract Available Africa Development Vol. XXX (1&2) 2005: 254-256. Article Metrics. No metrics ...

  18. Book review Information and Communication Technologies for ...

    African Journals Online (AJOL)

    Book review. Information and Communication Technologies for Development in Africa: Volume 2. The Experience with Community Telecentres By Florence Etta and Sheila Parvyn-Wamahiu (2003). Kibet A Ngetich. Abstract. No Abstract Available Africa Development Vol. XXX (1&2) 2005: 254-256.

  19. Geothermal Technologies Office 2012 Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-04-01

    On May 7-10, 2012, the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Geothermal Technologies Office conducted its annual program peer review in Westminster, CO. In accordance with the EERE Peer Review Guide, the review provides an independent, expert evaluation of the strategic goals and direction of the office and is a forum for feedback and recommendations on future office planning. The purpose of the review was to evaluate DOE-funded projects for their contribution to the mission and goals of the office and to assess progress made against stated objectives. Project scoring results, expert reviewer comments, and key findings and recommendations are included in this report.

  20. Abiraterone Acetate for the Treatment of Chemotherapy-Naïve Metastatic Castration-Resistant Prostate Cancer: An Evidence Review Group Perspective of an NICE Single Technology Appraisal.

    Science.gov (United States)

    Ramaekers, Bram L T; Riemsma, Rob; Tomini, Florian; van Asselt, Thea; Deshpande, Sohan; Duffy, Steven; Armstrong, Nigel; Severens, Johan L; Kleijnen, Jos; Joore, Manuela A

    2017-02-01

    The National Institute for Health and Care Excellence (NICE) invited Janssen, the company manufacturing abiraterone acetate (AA; tradename Zytiga ® ), to submit evidence for the clinical and cost effectiveness of AA in combination with prednisone/prednisolone (AAP) compared with watchful waiting (i.e. best supportive care [BSC]) for chemotherapy-naïve patients with metastatic castration-resistant prostate cancer (mCRPC). Kleijnen Systematic Reviews Ltd (KSR), in collaboration with Maastricht University Medical Center, was commissioned as the Evidence Review Group (ERG). This paper presents a summary of the company submission (CS), the ERG report, subsequent addenda, and the development of the NICE guidance for the use of this drug in England and Wales by the Appraisal Committee (AC). The ERG produced a critical review of the clinical and cost effectiveness of AAP based on the CS. An important question in this appraisal was, according to the ERG, whether AAP followed by docetaxel is more effective than BSC followed by docetaxel. In the COU-AA-302 trial, 239 of 546 (43.8 %) AAP patients and 304 of 542 (56.1 %) BSC patients received docetaxel as subsequent therapy, following AA or placebo. The results for this specific group of patients were not presented in the CS; therefore, the ERG asked the company to provide these data in the clarification letter; however, these data were presented as commercial-in-confidence and cannot therefore be reported here. The ERG's critical assessment of the company's economic evaluation highlighted a number of concerns, including (a) not using the intention-to-treat (ITT) population; (b) inconsistencies in estimating prediction equations; (c) not fully incorporating the impact of adverse events; (d) incorrectly incorporating the new patient access scheme (PAS); and (e) the assumption that AA non-compliance leads to recoverable drug costs. Although some of these issues were adjusted in the ERG base case, the ERG could not estimate

  1. Advanced conversion technology review panel report

    International Nuclear Information System (INIS)

    Frazier, T.A.

    1998-01-01

    The Department of Energy (DOE), the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) established a DOE lead management team and an Advanced Conversion Technology Review Panel. The panel was tasked with providing the management team with an assessment and ranking of the three advanced conversion technologies. The three advanced conversion technologies were alkali metal thermal to electric converter (AMTEC), Stirling engine converter (SEC), and thermophotovoltaic (TPV). To rate and rank these three technologies, five criteria were developed: (1) Performance, (2) Development and Cost/Production and Cost/Schedule Risk, (3) Spacecraft Interface and Operations, (4) Ability to Scale Conversion, and (5) Safety. Discussed are the relative importance of each of these criteria and the rankings of the three advanced conversion technologies. It was the conclusion of the panel that the technology decision should be based on the risk that DOE and NASA are willing to accept. SEC is the most mature technology and would provide the lowest risk option. However, if more risk is acceptable, AMTEC not only provides benefits in the spacecraft interface but is also predicted to outperform the SEC. It was proposed that if AMTEC were selected, funding should be provided at a reasonable level to support back-up technology to be developed in a parallel fashion until AMTEC has proven its capability. The panel report and conclusion were provided to DOE in February 1997

  2. Science & Technology Review July/August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-07-18

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. In this issue for the months of July and August 2016, there are two features: one on Science and Technology in Support of Nuclear Nonproliferation, and another on Seeking Out Hidden Radioactive Materials. Then there are highlights are three research projects--on optics, plasma science, and the nature of neutrinos--along with a news section and patents and awards.

  3. Science & Technology Review July/August 2016

    International Nuclear Information System (INIS)

    Vogt, Ramona L.; Meissner, Caryn N.; Chinn, Ken B.

    2016-01-01

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation's security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory's scientific and technological accomplishments in fulfilling its primary missions. The publication's goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. In this issue for the months of July and August 2016, there are two features: one on Science and Technology in Support of Nuclear Nonproliferation, and another on Seeking Out Hidden Radioactive Materials. Then there are highlights are three research projects--on optics, plasma science, and the nature of neutrinos--along with a news section and patents and awards.

  4. Olaratumab in Combination with Doxorubicin for the Treatment of Advanced Soft Tissue Sarcoma: An Evidence Review Group Perspective of a National Institute for Health and Care Excellence Single Technology Appraisal.

    Science.gov (United States)

    Tikhonova, Irina A; Jones-Hughes, Tracey; Dunham, James; Warren, Fiona C; Robinson, Sophie; Stephens, Peter; Hoyle, Martin

    2018-01-01

    The manufacturer of olaratumab (Lartruvo ® ), Eli Lilly & Company Limited, submitted evidence for the clinical and cost effectiveness of this drug, in combination with doxorubicin, for untreated advanced soft tissue sarcoma (STS) not amenable to surgery or radiotherapy, as part of the National Institute for Health and Care Excellence (NICE) Single Technology Appraisal process. The Peninsula Technology Assessment Group, commissioned to act as the Evidence Review Group (ERG), critically reviewed the company's submission. Clinical effectiveness evidence for the company's analysis was derived from an open-label, randomised controlled trial, JGDG. The analysis was based on a partitioned survival model with a time horizon of 25 years, and the perspective was of the UK National Health Service (NHS) and Personal Social Services. Costs and benefits were discounted at 3.5% per year. Given the available evidence, olaratumab is likely to meet NICE's end-of-life criteria. To improve the cost effectiveness of olaratumab, the company offered a discount through a Commercial Access Agreement (CAA) with the NHS England. When the discount was applied, the mean base-case and probabilistic incremental cost-effectiveness ratios (ICERs) for olaratumab plus doxorubicin versus the standard-of-care doxorubicin were £46,076 and £47,127 per quality-adjusted life-year (QALY) gained, respectively; the probability of this treatment being cost effective at the willingness-to-pay threshold of £50,000 per QALY gained, applicable to end-of-life treatments, was 0.54. The respective ICERs from the ERG's analysis were approximately £60,000/QALY gained, and the probability of the treatment being cost effective was 0.21. In August 2017, the NICE Appraisal Committee recommended olaratumab in combination with doxorubicin for this indication for use via the UK Cancer Drugs Fund under the agreed CAA until further evidence being collected in the ongoing phase III trial-ANNOUNCE-becomes available in

  5. Review of Current Nuclear Vacuum System Technologies

    International Nuclear Information System (INIS)

    Carroll, M.; McCracken, J.; Shope, T.

    2003-01-01

    Nearly all industrial operations generate unwanted dust, particulate matter, and/or liquid wastes. Waste dust and particulates can be readily tracked to other work locations, and airborne particulates can be spread through ventilation systems to all locations within a building, and even vented outside the building - a serious concern for processes involving hazardous, radioactive, or nuclear materials. Several varieties of vacuum systems have been proposed and/or are commercially available for clean up of both solid and liquid hazardous and nuclear materials. A review of current technologies highlights both the advantages and disadvantages of the various systems, and demonstrates the need for a system designed to address issues specific to hazardous and nuclear material cleanup. A review of previous and current hazardous/nuclear material cleanup technologies is presented. From simple conventional vacuums modified for use in industrial operations, to systems specifically engineered for such purposes, the advantages and disadvantages are examined in light of the following criteria: minimal worker exposure; minimal secondary waste generation;reduced equipment maintenance and consumable parts; simplicity of design, yet fully compatible with all waste types; and ease of use. The work effort reviews past, existing and proposed technologies in light of such considerations. Accomplishments of selected systems are presented, including identified areas where technological improvements could be suggested

  6. Current biodiesel production technologies: A comparative review

    International Nuclear Information System (INIS)

    Abbaszaadeh, Ahmad; Ghobadian, Barat; Omidkhah, Mohammad Reza; Najafi, Gholamhassan

    2012-01-01

    Highlights: ► In this paper we review the technologies related to biodiesel production. ► 4 Primary approaches reviewed are direct use and blending of oils, micro-emulsions, pyrolysis and transesterification method. ► Both advantages and disadvantages of the different biodiesel production methods are also discussed. ► The most common technology of biodiesel production is transesterification of oils. ► Selection of a transesterification method depends on the amount of FFA and water content of the feedstock. - Abstract: Despite the high energy demand in the industrialized world and the pollution problems caused by widespread use of fossil fuels, the need for developing renewable energy sources with less environmental impacts are increasing. Biodiesel production is undergoing rapid and extensive technological reforms in industries and academia. The major obstacle in production and biodiesel commercialization path is production cost. Thus, in previous years numerous studies on the use of technologies and different methods to evaluate optimal conditions of biodiesel production technically and economically have been carried out. In this paper, a comparative review of the current technological methods so far used to produce biodiesel has been investigated. Four primary approaches to make biodiesel are direct use and blending of vegetable oils, micro-emulsions, thermal cracking (pyrolysis) and transesterification. Transesterification reaction, the most common method in the production of biodiesel, is emphasized in this review. The two types of transestrification process; catalytic and non-catalytic are discussed at length in the paper. Both advantages and disadvantages of the different biodiesel production methods are also discussed.

  7. Review of emerging surgical robotic technology.

    Science.gov (United States)

    Peters, Brian S; Armijo, Priscila R; Krause, Crystal; Choudhury, Songita A; Oleynikov, Dmitry

    2018-04-01

    The use of laparoscopic and robotic procedures has increased in general surgery. Minimally invasive robotic surgery has made tremendous progress in a relatively short period of time, realizing improvements for both the patient and surgeon. This has led to an increase in the use and development of robotic devices and platforms for general surgery. The purpose of this review is to explore current and emerging surgical robotic technologies in a growing and dynamic environment of research and development. This review explores medical and surgical robotic endoscopic surgery and peripheral technologies currently available or in development. The devices discussed here are specific to general surgery, including laparoscopy, colonoscopy, esophagogastroduodenoscopy, and thoracoscopy. Benefits and limitations of each technology were identified and applicable future directions were described. A number of FDA-approved devices and platforms for robotic surgery were reviewed, including the da Vinci Surgical System, Sensei X Robotic Catheter System, FreeHand 1.2, invendoscopy E200 system, Flex® Robotic System, Senhance, ARES, the Single-Port Instrument Delivery Extended Research (SPIDER), and the NeoGuide Colonoscope. Additionally, platforms were reviewed which have not yet obtained FDA approval including MiroSurge, ViaCath System, SPORT™ Surgical System, SurgiBot, Versius Robotic System, Master and Slave Transluminal Endoscopic Robot, Verb Surgical, Miniature In Vivo Robot, and the Einstein Surgical Robot. The use and demand for robotic medical and surgical platforms is increasing and new technologies are continually being developed. New technologies are increasingly implemented to improve on the capabilities of previously established systems. Future studies are needed to further evaluate the strengths and weaknesses of each robotic surgical device and platform in the operating suite.

  8. Innovative waste treatment and conditioning technologies at nuclear power plants

    International Nuclear Information System (INIS)

    2006-05-01

    The objective of this publication is to provide Member States with information on the most innovative technologies and strategies used in waste treatment and conditioning. At present, some of those technologies and strategies might not be widely implemented at nuclear power plants (NPP), but they have an important potential for their use as part of the long range NPP, utility, or national strategy. Thus, the target audience is those decision makers at the national and organizational level responsible for selecting waste processing technologies and strategies over a period of three to ten years. Countries and individual nuclear plants have limited financial resources which can be applied toward radioactive waste processing (treatment and conditioning). They are challenged to determine which of the many available technologies and strategies are best suited to meet national or local needs. This publication reduces the selection of processes for wastes generated by nuclear power plants to those technologies and strategies which are considered innovative. The report further identifies the key benefits which may derive from the adoption of those technologies, the different waste streams to which each technology is relevant, and the limitations of the technologies. The technologies and strategies identified have been evaluated to differentiate between (1) predominant technologies (those that are widely practiced in multiple countries or a large number of nuclear plants), and (2) innovative technologies (those which are not so widely used but are considered to offer benefits which make them suitable for broader application across the industry). Those which fall into the second category are the primary focus of this report. Many IAEA publications address the technical aspects of treatment and conditioning for radioactive wastes, covering research, technological advances, and safety issues. These studies and reports primarily target the research and technical staff of a

  9. A Literature Review of Spreadsheet Technology

    DEFF Research Database (Denmark)

    Bock, Alexander

    2016-01-01

    It was estimated that there would be over 55 million end-user programmers in 2012 in many different fields such as engineering,insurance and banking, and the numbers are not expected to have dwindled since. Consequently, technological advancements of spreadsheets is of great interest to a wide...... number of people from different backgrounds. This literature review presents an overview of research on spreadsheet technology, its challenges and its solutions. We also attempt to identify why software developers generally frown upon spreadsheets and how spreadsheet research can help alter this view....

  10. Bench-Scale and Pilot-Scale Treatment Technologies for the Removal of Total Dissolved Solids from Coal Mine Water: A Review.

    Data.gov (United States)

    U.S. Environmental Protection Agency — There is no database. This dataset is not publicly accessible because: This is a review manuscript, there was not data generated under this effort. All data used was...

  11. Advances in HTGR spent fuel treatment technology

    International Nuclear Information System (INIS)

    Holder, N.D.; Lessig, W.S.

    1984-08-01

    GA Technologies, Inc. has been investigating the burning of spent reactor graphite under Department of Energy sponsorship since 1969. Several deep fluidized bed burners have been used at the GA pilot plant to develop graphite burning techniques for both spent fuel recovery and volume reduction for waste disposal. Since 1982 this technology has been extended to include more efficient circulating bed burners. This paper includes updates on high-temperature gas-cooled reactor fuel cycle options and current results of spent fuel treatment testing for fluidized and advanced circulating bed burners

  12. Review of advanced catheter technologies in radiation oncology brachytherapy procedures

    OpenAIRE

    Zhou J; Zamdborg L; Sebastian E

    2015-01-01

    Jun Zhou,1,2 Leonid Zamdborg,1 Evelyn Sebastian1 1Department of Radiation Oncology, Beaumont Health System, 2Oakland University William Beaumont School of Medicine, Royal Oak, MI, USA Abstract: The development of new catheter and applicator technologies in recent years has significantly improved treatment accuracy, efficiency, and outcomes in brachytherapy. In this paper, we review these advances, focusing on the performance of catheter imaging and reconstruction techniques in brachytherapy ...

  13. Emerging Technologies Landscape on Education. A review

    Directory of Open Access Journals (Sweden)

    Luis de la Fuente Valentin

    2013-09-01

    Full Text Available This paper presents a desk research that analysed available recent studies in the field of Technology Enhanced Learning. The desk research is focused on work produced in the frame of FP6 and FP7 European programs, in the area of Information and Communication Technologies. It concentrates in technologies that support existing forms of learning, and also in technologies that enhance new learning paradigms. This approach includes already adopted and successfully piloted technologies. The elaboration of the desk research had three main parts: firstly, the collection of documents from CORDIS and other institutions related to TEL research; secondly, the identification of relevant terms appearing in those documents and the elaboration of a thesaurus; and thirdly, a quantitative analysis of each term occurrences. Many of the identified technologies belong to the fields of interactive multimedia, Human-computer Interaction and-or related to recommendation and learning analytics. This study becomes a thorough review of the current state of these fields through the actual development of R&D European projects. This research, will be used as a basis to better understand the evolution of the sector, and to focus future research efforts on these sectors and their application to education.

  14. Review: Security in Wireless Technologies in Business

    Science.gov (United States)

    Sattarova, F. Y.; Kim, Tai-Hoon

    Wireless technology seems to be everywhere now - but it is still relatively in its infancy. New standards and protocols continue to emerge and problems and bugs are discovered. Nevertheless, wireless networks make many things much more convenient and it appears that wireless networks are here to stay. The differences and similarities of wireless and wired security, the new threats brought by mobility, the security of networks and devices and effects of security, or lack of it are shortly discussed in this review paper.

  15. Science and Technology Review, August 1996

    Energy Technology Data Exchange (ETDEWEB)

    Failor, B.; Stull, S.; Wheatcraft, D. [eds.

    1996-08-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. Topics discussed in this August 1996 issue are: Keeping the nuclear stockpile safe, secure, and reliable; Molten salt takes the bang out of high explosives; Security clearances meet the electronic age; and Exploring oil fields with crosshole electromagnetic induction.

  16. Medical imaging technology reviews and computational applications

    CERN Document Server

    Dewi, Dyah

    2015-01-01

    This book presents the latest research findings and reviews in the field of medical imaging technology, covering ultrasound diagnostics approaches for detecting osteoarthritis, breast carcinoma and cardiovascular conditions, image guided biopsy and segmentation techniques for detecting lung cancer, image fusion, and simulating fluid flows for cardiovascular applications. It offers a useful guide for students, lecturers and professional researchers in the fields of biomedical engineering and image processing.

  17. 2012 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-26

    The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

  18. ENDOSCOPIC TECHNOLOGIES IN EARLY RECTAL CANCER TREATMENT

    Directory of Open Access Journals (Sweden)

    D. V. Samsonov

    2015-01-01

    Full Text Available Total mesorectal excision is the “golden standard” of surgical treatment for rectal cancer. Development of endoscopic technologies allowed to implement the benefits of minimally invasive surgery in early rectal cancer treatment, decrease morbidity and mortality, improve functional outcome and quality of life. Oncological safety of this method is still a subject for discussion due to lack of lymph node harvest. Endoscopic operations for early rectal cancer are being actively implemented in daily practice, but lack of experience does not allow to include this method in national clinical prac-tice guidelines.

  19. Preservation technologies for fresh meat - a review.

    Science.gov (United States)

    Zhou, G H; Xu, X L; Liu, Y

    2010-09-01

    Fresh meat is a highly perishable product due to its biological composition. Many interrelated factors influence the shelf life and freshness of meat such as holding temperature, atmospheric oxygen (O(2)), endogenous enzymes, moisture, light and most importantly, micro-organisms. With the increased demand for high quality, convenience, safety, fresh appearance and an extended shelf life in fresh meat products, alternative non-thermal preservation technologies such as high hydrostatic pressure, superchilling, natural biopreservatives and active packaging have been proposed and investigated. Whilst some of these technologies are efficient at inactivating the micro-organisms most commonly related to food-borne diseases, they are not effective against spores. To increase their efficacy against vegetative cells, a combination of several preservation technologies under the so-called hurdle concept has also been investigated. The objective of this review is to describe current methods and developing technologies for preserving fresh meat. The benefits of some new technologies and their industrial limitations is presented and discussed.

  20. Cesium and Strontium Separation Technologies Literature Review

    Energy Technology Data Exchange (ETDEWEB)

    T. A. Todd; T. A. Todd; J. D. Law; R. S. Herbst

    2004-03-01

    Integral to the Advanced Fuel Cycle Initiative (AFCI) Program’s proposed closed nuclear fuel cycle, the fission products cesium and strontium in the dissolved spent nuclear fuel stream are to be separated and managed separately. A comprehensive literature survey is presented to identify cesium and strontium separation technologies that have the highest potential and to focus research and development efforts on these technologies. Removal of these high-heat-emitting fission products reduces the radiation fields in subsequent fuel cycle reprocessing streams and provides a significant short-term (100 yr) heat source reduction in the repository. This, along with separation of actinides, may provide a substantial future improvement in the amount of fuel that could be stored in a geologic repository. The survey and review of the candidate cesium and strontium separation technologies are presented herein. Because the AFCI program intends to manage cesium and strontium together, technologies that simultaneously separate both elements are of the greatest interest, relative to technologies that separate only one of the two elements.

  1. Cutaneous lichen planus: A systematic review of treatments.

    Science.gov (United States)

    Fazel, Nasim

    2015-06-01

    Various treatment modalities are available for cutaneous lichen planus. Pubmed, EMBASE, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, Database of Abstracts of Reviews of Effects, and Health Technology Assessment Database were searched for all the systematic reviews and randomized controlled trials related to cutaneous lichen planus. Two systematic reviews and nine relevant randomized controlled trials were identified. Acitretin, griseofulvin, hydroxychloroquine and narrow band ultraviolet B are demonstrated to be effective in the treatment of cutaneous lichen planus. Sulfasalazine is effective, but has an unfavorable safety profile. KH1060, a vitamin D analogue, is not beneficial in the management of cutaneous lichen planus. Evidence from large scale randomized trials demonstrating the safety and efficacy for many other treatment modalities used to treat cutaneous lichen planus is simply not available.

  2. Nanofiltration technology in water treatment and reuse: applications and costs.

    Science.gov (United States)

    Shahmansouri, Arash; Bellona, Christopher

    2015-01-01

    Nanofiltration (NF) is a relatively recent development in membrane technology with characteristics that fall between ultrafiltration and reverse osmosis (RO). While RO membranes dominate the seawater desalination industry, NF is employed in a variety of water and wastewater treatment and industrial applications for the selective removal of ions and organic substances, as well as certain niche seawater desalination applications. The purpose of this study was to review the application of NF membranes in the water and wastewater industry including water softening and color removal, industrial wastewater treatment, water reuse, and desalination. Basic economic analyses were also performed to compare the profitability of using NF membranes over alternative processes. Although any detailed cost estimation is hampered by some uncertainty (e.g. applicability of estimation methods to large-scale systems, labor costs in different areas of the world), NF was found to be a cost-effective technology for certain investigated applications. The selection of NF over other treatment technologies, however, is dependent on several factors including pretreatment requirements, influent water quality, treatment facility capacity, and treatment goals.

  3. Science and Technology Review, September 1996

    Energy Technology Data Exchange (ETDEWEB)

    Failor, B.; Upadhye, R.; Wheatcraft, D. [eds.

    1996-09-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments in fulfilling its primary missions. The feature articles are `Taking Lasers beyond the National Ignition Facility` and `Jumpin` Jupiter! Metallic Hydrogen`. The first article describes the ultimate goal of laser fusion as the production of electricity by inertial confinement fusion. Advances in diode-laser technology promise to take another step closer to that goal. The latter article discusses a Laboratory team`s efforts to provide evidence for the metallization of hydrogen based on the team`s expertise in shock compression. A commentary on `The Next Frontiers of Advanced Lasers Research is provided, and a research highlight is given on `Modeling Human Joints and Prosthetic Implants.

  4. Tissue Microarray TechnologyA Brief Review

    Directory of Open Access Journals (Sweden)

    Ramya S Vokuda

    2018-01-01

    Full Text Available In this era of modern revolutionisation in the field of medical laboratory technology, everyone is aiming at taking the innovations from laboratory to bed side. One such technique that is most relevant to the pathologic community is Tissue Microarray (TMA technology. This is becoming quite popular amongst all the members of this family, right from laboratory scientists to clinicians and residents to technologists. The reason for this technique to gain popularity is attributed to its cost effectiveness and time saving protocols. Though, every technique is accompanied by disadvantages, the benefits out number them. This technique is very versatile as many downstream molecular assays such as immunohistochemistry, cytogenetic studies, Fluorescent In situ-Hybridisation (FISH etc., can be carried out on a single slide with multiple numbers of samples. It is a very practical approach that aids effectively to identify novel biomarkers in cancer diagnostics and therapeutics. It helps in assessing the molecular markers on a large scale very quickly. Also, the quality assurance protocols in pathological laboratory has exploited TMA to a great extent. However, the application of TMA technology is beyond oncology. This review shall focus on the different aspects of this technology such as construction of TMA, instrumentation, types, advantages and disadvantages and utilisation of the technique in various disease conditions.

  5. Technology - a review of current status

    International Nuclear Information System (INIS)

    Wolf, R.

    1986-01-01

    The book reviews the history of the efforts taken by the political and administrative authorities to acquire the technical knowledge required to fulfill their functions as competent authorities to evaluate and decide on technical feasibility and economic justification of complex technical processes, a task which constantly puts strain on the authorities, who have to keep up with the technological know-how of the industrial and technological establishments who, as it where, stand opposite to the authorities in the process of legal regulation of technological risks. The author explains the problems involved in the attempt to use existing, or establish adequate new, legal provisions to reconcile the interests of the law with those of the economy. The leading example for this purpose is the air pollution control laws. Further aspects discussed are steps taken from a technicalization of the law towards a proceduralization, and attempts towards a control of technology in a democratic constitutional state. The chapter on the 'risk to be tolerated' in the law on licensing of nuclear installations has been separately analysed and abstracted for the database. (HSCH) [de

  6. Onsite Greywater Treatment using Pilot Scale Technology

    Directory of Open Access Journals (Sweden)

    Manzoor-ul-Haq Rajput

    2015-04-01

    Full Text Available The GROW Technology for greywater treatment was installed at the MUET (Mehran University of Engineering & Technology, hostel and run under continuous flow conditions with hydraulic loading rate of 0.15m.d-1. The monitoring and analysis of influent and effluent water were carried out during January-December, 2010. Local plants species such as water hyacinth, Pennywort (duck weed, Mint and Cattail were used in the GROW rig as a mixed mode. Coarse Gravels were filled in the troughs as a medium. The collected samples were analyzed for BOD5 (Biochemical Oxygen Demand, COD (Chemical Oxygen Demand, TSS (Total Suspended Solids, pH, and DO (Dissolved Oxygen. Removal efficiencies of BOD5, COD and TSS were calculated as 83.0,69.0 and 84.0% respectively. DO was found increased from 0.6-3.5 mg.dm-3 while pH was observed between 6.5-7.8

  7. New technologies for big multimedia data treatment

    OpenAIRE

    Barrionuevo, Mercedes; Britos, Luis; Bustos, Fabricio H.; Gil Costa, Graciela Verónica; Lopresti, Mariela; Mancini, Virginia; Miranda, Natalia Carolina; Ochoa, César; Piccoli, María Fabiana; Printista, Alicia Marcela; Reyes, Nora Susana

    2013-01-01

    With the technology advance and the growth of Internet, the information that can be found in this net, as well as the number of users that access to look for specific data is bigger. Therefore, it is desirable to have a search system that allows to retrieve information at a reasonable time and in an efficient way. In this paper we show two computing paradigms appropriate to apply in the treatment of large amounts of data consisting of objects such as images, text, sound and video, using hybrid ...

  8. The future for electrocoagulation as a localised water treatment technology.

    Science.gov (United States)

    Holt, Peter K; Barton, Geoffrey W; Mitchell, Cynthia A

    2005-04-01

    Electrocoagulation is an electrochemical method of treating polluted water whereby sacrificial anodes corrode to release active coagulant precursors (usually aluminium or iron cations) into solution. Accompanying electrolytic reactions evolve gas (usually as hydrogen bubbles) at the cathode. Electrocoagulation has a long history as a water treatment technology having been employed to remove a wide range of pollutants. However electrocoagulation has never become accepted as a 'mainstream' water treatment technology. The lack of a systematic approach to electrocoagulation reactor design/operation and the issue of electrode reliability (particularly passivation of the electrodes over time) have limited its implementation. However recent technical improvements combined with a growing need for small-scale decentralised water treatment facilities have led to a re-evaluation of electrocoagulation. Starting with a review of electrocoagulation reactor design/operation, this article examines and identifies a conceptual framework for electrocoagulation that focuses on the interactions between electrochemistry, coagulation and flotation. In addition detailed experimental data are provided from a batch reactor system removing suspended solids together with a mathematical analysis based on the 'white water' model for the dissolved air flotation process. Current density is identified as the key operational parameter influencing which pollutant removal mechanism dominates. The conclusion is drawn that electrocoagulation has a future as a decentralised water treatment technology. A conceptual framework is presented for future research directed towards a more mechanistic understanding of the process.

  9. Recent progresses and achievements in photovoltaic-phase change material technology: A review with special treatment on photovoltaic thermal-phase change material systems

    International Nuclear Information System (INIS)

    Islam, M.M.; Pandey, A.K.; Hasanuzzaman, M.; Rahim, N.A.

    2016-01-01

    Highlights: • Broad summary of phase change materials based cooling for photovoltaic modules. • Compendium on phase change materials that are mostly used in photovoltaic systems. • Extension of heat availability period by 75–100% with phase change material. • Heat storage potential improves by 33–50% more with phase change material. • Future trend and move in photovoltaic thermal research. - Abstract: This communication lays out an appraisal on the recent works of phase change materials based thermal management techniques for photovoltaic systems with special focus on the so called photovoltaic thermal-phase change material system. Attempt has also been made to draw wide-ranging classification of both photovoltaic and photovoltaic thermal systems and their conventional cooling or heat harvesting methods developed so far so that feasible phase change materials application area in these systems can be pointed out. In addition, a brief literature on phase change materials with particular focus on their solar application has also been presented. Overview of the researches and studies establish that using phase change materials for photovoltaic thermal control is technically viable if some issues like thermal conductivity or phase stability are properly addressed. The photovoltaic thermal-phase change material systems are found to offer 33% (maximum 50%) more heat storage potential than the conventional photovoltaic-thermal water system and that with 75–100% extended heat availability period and around 9% escalation in output. Reduction in temperature attained with photovoltaic thermal-phase change material system is better than that with regular photovoltaic-thermal water system, too. Studies also show the potential of another emerging technology of photovoltaic thermal-microencapsulated phase change material system that makes use of microencapsulated phase change materials in thermal regulation. Future focus areas on photovoltaic thermal-phase change

  10. Technology and the Future of Mental Health Treatment

    Science.gov (United States)

    ... Health Intervention Technology? Join a Study Learn More Technology and the Future of Mental Health Treatment Introduction ... What is NIMH’s Role in Mental Health Intervention Technology? Between FY2009 and FY2015, NIMH awarded 404 grants ...

  11. The NICE ADHD health technology assessment: A review and critique

    Directory of Open Access Journals (Sweden)

    Schlander Michael

    2008-01-01

    Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

  12. Compulsory Treatment in Anorexia Nervosa : A Review

    NARCIS (Netherlands)

    Elzakkers, Isis F. F. M.; Danner, Unna N.; Hoek, Hans W.; Schmidt, Ulrike; van Elburg, Annemarie A.

    2014-01-01

    ObjectiveCompulsory in-patient refeeding of patients with severe anorexia nervosa (AN) has caused considerable controversy. The effects of such treatment on longer-term outcome are not well known. The objective of this article is to review the evidence on the outcome of compulsory treatment for AN.

  13. Treatment of Childhood Obesity: A Systematic Review

    Science.gov (United States)

    Staniford, Leanne J.; Breckon, Jeff D.; Copeland, Robert J.

    2012-01-01

    Childhood obesity trends have increased dramatically over the past three decade's. The purpose of this quantitative systematic review is to provide an update of the evidence, illustrating the efficacy of childhood obesity treatment, considering whether treatment fidelity has been measured and/or reported and whether this related to the treatment…

  14. Science & Technology Review May/June 2008

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2008-03-19

    This month's issue has the following articles: (1) Biomedical Technology Has a Home at Livermore--Commentary by Cherry A. Murray; (2) Shaping the Future of Aneurysm Treatments--Livermore foam devices may offer significant advantages for treating some forms of aneurysms; (3) Ring around a Stellar Shell: A Tale of Scientific Serendipity--Using a three-dimensional model, Livermore scientists have solved a long-standing puzzle of stellar evolution; and (4) On Assignment in Washington, DC--Livermore personnel in Washington, DC, support federal sponsors and become valuable assets to Laboratory programs.

  15. Science & Technology Review October/November 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, R. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-11-11

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. The Laboratory is operated by Lawrence Livermore National Security, LLC (LLNS), for the Department of Energy’s National Nuclear Security Administration. LLNS is a partnership involving Bechtel National, University of California, Babcock & Wilcox, Washington Division of URS Corporation, and Battelle in affiliation with Texas A&M University. More information about LLNS is available online at www.llnsllc.com. Please address any correspondence (including name and address changes) to S&TR, Mail Stop L-664, Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, California 94551, or telephone (925) 423-3893. Our e-mail address is str-mail@llnl.gov. S&TR is available on the Web at str.llnl.gov.

  16. Nail Psoriasis: A Review of Treatment Options.

    Science.gov (United States)

    Pasch, Marcel C

    2016-04-01

    Nail involvement affects 80-90 % of patients with plaque psoriasis, and is even more prevalent in patients with psoriatic arthritis. This review is the result of a systemic approach to the literature and covers topical, intralesional, conventional systemic, and biologic systemic treatments, as well as non-pharmacological treatment options for nail psoriasis. The available evidence suggests that all anti-tumor necrosis factor-α, anti-interleukin (IL)-17, and anti-IL-12/23 antibodies which are available for plaque psoriasis and psoriatic arthritis are highly effective treatments for nail psoriasis. Conventional systemic treatments, including methotrexate, cyclosporine, acitretin, and apremilast, as well as intralesional corticosteroids, can also be effective treatments for nail psoriasis. Topical treatments, including corticosteroids, calcipotriol, tacrolimus, and tazarotene, have also been shown to have a position in the treatment of nail psoriasis, particularly in mild cases. Finally, non-pharmacological treatment options, including phototherapy, photodynamic therapy, laser therapy, and several radiotherapeutic options, are also reviewed but cannot be advised as first-line treatment options. Another conclusion of this review is that the lack of a reliable core set of outcomes measures for trials in nail psoriasis hinders the interpretation of results, and is urgently needed.

  17. Role of varicocele treatment in assisted reproductive technologies

    Directory of Open Access Journals (Sweden)

    Mehmet G. Sönmez

    2018-03-01

    Full Text Available Objective: In this review, we investigate the advantage of varicocele repair prior to assisted reproductive technologies (ART for infertile couples and provide cost analysis information. Materials and methods: We searched the following electronic databases: PubMed, Medline, Excerpta Medica Database (Embase, Cumulative Index to Nursing and Allied Health Literature (CINAHL. The following search strategy was modified for the various databases and search engines: ‘varicocele’, ‘varicocelectomy’, ‘varicocele repair’, ‘ART’, ‘in vitro fertilisation (IVF’, ‘intracytoplasmic sperm injection (ICSI’. Results: A total of 49 articles, including six meta-analyses, 32 systematic reviews, and 11 original articles, were included in the analysis. Bypassing potentially reversible male subfertility factors using ART is currently common practice. However, varicocele may be present in 35% of men with primary infertility and 80% of men with secondary infertility. Varicocele repair has been shown to be an effective treatment for infertile men with clinical varicocele, thus should play an important role in the treatment of such patients due to the foetal/genetic risks and high costs that are associated with increased ART use. Conclusion: Varicocele repair is a cost-effective treatment method that can improve semen parameters, pregnancy rates, and live-birth rates in most infertile men with clinical varicocele. By improving semen parameters and sperm structure, varicocele repair can decrease or even eliminate ART requirement. Keywords: Assisted reproductive technology, In vitro fertilisation, Intracytoplasmic sperm injection, Varicocele, Varicocelectomy

  18. Treatment of uranium contaminated wastewater – a review

    International Nuclear Information System (INIS)

    Dulama, M.; Iordache, M.; Deneanu, N.

    2013-01-01

    The paper presents a study of the treatment techniques used for uranium recovery from aqueous solutions, such as: precipitation, ion exchange processes, sorption processes, solvent extractions, separation by liquid membrane, nanofiltration and reverse osmosis. The necessary elements for rigorous treatment experiments that can be used to define innovative procedure for uranium contaminated wastewater treatment are described in this review. The published data were summarized and the areas for further research were identified in order to be able to propose an environmental friendly technology in the field of uranium production and recovery cycle. (authors)

  19. Technological factors affecting biogenic amine content in foods: a review

    Directory of Open Access Journals (Sweden)

    Fausto Gardini

    2016-08-01

    Full Text Available Biogenic amines (BAs are molecules which can be present in foods and, due to their toxicity, can cause adverse effects on the consumers. BAs are generally produced by microbial decarboxylation of amino acids in food products. The most significant BAs occurring in foods are histamine, tyramine, putrescine, cadaverine, tryptamine, 2-phenylethylamine, spermine, spermidine and agmatine. The importance of preventing the excessive accumulation of BAs in food is related to their impact on human health and food quality. Quality criteria in connection with the presence of BAs in food and food products are necessary from a toxicological point of view. This is particularly important in fermented foods in which the massive microbial proliferation required for obtaining specific products is often relater with BA accumulation. In this review, up-to-date information and recent discoveries about technological factors affecting biogenic amine content in foods are reviewed. Specifically, BA forming-microorganism and decarboxylation activity, genetic and metabolic organization of decarboxylases, risk associated to BAs (histamine, tyramine toxicity and other BAs, environmental factors influencing BA formation (temperature, salt concentration, pH. In addition, the technological factors for controlling BA production (use of starter culture, technological additives, effects of packaging, other non-thermal treatments, metabolising BA by microorganisms, effects of pressure treatments on BA formation and antimicrobial substances are addressed.

  20. Distillery spent wash: Treatment technologies and potential applications

    International Nuclear Information System (INIS)

    Mohana, Sarayu; Acharya, Bhavik K.; Madamwar, Datta

    2009-01-01

    Distillery spent wash is the unwanted residual liquid waste generated during alcohol production and pollution caused by it is one of the most critical environmental issue. Despite standards imposed on effluent quality, untreated or partially treated effluent very often finds access to watercourses. The distillery wastewater with its characteristic unpleasant odor poses a serious threat to the water quality in several regions around the globe. The ever-increasing generation of distillery spent wash on the one hand and stringent legislative regulations of its disposal on the other has stimulated the need for developing new technologies to process this effluent efficiently and economically. A number of clean up technologies have been put into practice and novel bioremediation approaches for treatment of distillery spent wash are being worked out. Potential microbial (anaerobic and aerobic) as well as physicochemical processes as feasible remediation technologies to combat environmental pollution are being explored. An emerging field in distillery waste management is exploiting its nutritive potential for production of various high value compounds. This review presents an overview of the pollution problems caused by distillery spent wash, the technologies employed globally for its treatment and its alternative use in various biotechnological sectors

  1. Treatment of petroleum hydrocarbon polluted environment through bioremediation: a review.

    Science.gov (United States)

    Singh, Kriti; Chandra, Subhash

    2014-01-01

    Bioremediation play key role in the treatment of petroleum hydrocarbon contaminated environment. Exposure of petroleum hydrocarbon into the environment occurs either due to human activities or accidentally and cause environmental pollution. Petroleum hydrocarbon cause many toxic compounds which are potent immunotoxicants and carcinogenic to human being. Remedial methods for the treatment of petroleum contaminated environment include various physiochemical and biological methods. Due to the negative consequences caused by the physiochemical methods, the bioremediation technology is widely adapted and considered as one of the best technology for the treatment of petroleum contaminated environment. Bioremediation utilizes the natural ability of microorganism to degrade the hazardous compound into simpler and non hazardous form. This paper provides a review on the role of bioremediation in the treatment of petroleum contaminated environment, discuss various hazardous effects of petroleum hydrocarbon, various factors influencing biodegradation, role of various enzymes in biodegradation and genetic engineering in bioremediation.

  2. The Use of Technology in Identifying Hospital Malnutrition: Scoping Review.

    Science.gov (United States)

    Trtovac, Dino; Lee, Joon

    2018-01-19

    Malnutrition is a condition most commonly arising from the inadequate consumption of nutrients necessary to maintain physiological health and is associated with the development of cardiovascular disease, osteoporosis, and sarcopenia. Malnutrition occurring in the hospital setting is caused by insufficient monitoring, identification, and assessment efforts. Furthermore, the ability of health care workers to identify and recognize malnourished patients is suboptimal. Therefore, interventions focusing on the identification and treatment of malnutrition are valuable, as they reduce the risks and rates of malnutrition within hospitals. Technology may be a particularly useful ally in identifying malnutrition due to scalability, timeliness, and effectiveness. In an effort to explore the issue, this scoping review synthesized the availability of technological tools to detect and identify hospital malnutrition. Our objective was to conduct a scoping review of the different forms of technology used in addressing malnutrition among adults admitted to hospital to (1) identify the extent of the published literature on this topic, (2) describe key findings, and (3) identify outcomes. We designed and implemented a search strategy in 3 databases (PubMed, Scopus, and CINAHL). We completed a descriptive numerical summary and analyzed study characteristics. One reviewer independently extracted data from the databases. We retrieved and reviewed a total of 21 articles. We categorized articles by the computerized tool or app type: malnutrition assessment (n=15), food intake monitoring (n=5), or both (n=1). Within those categories, we subcategorized the different technologies as either hardware (n=4), software (n=13), or both (n=4). An additional subcategory under software was cloud-based apps (n=1). Malnutrition in the acute hospital setting was largely an unrecognized problem, owing to insufficient monitoring, identification, and initial assessments of identifying both patients who are

  3. A review of magnetic heat pump technology

    International Nuclear Information System (INIS)

    Barclay, J.A.

    1990-01-01

    The area of technology classified as heat pumps generally refers to refrigerators, heat pumps and heat engines. This review is restricted to the literature on magnetic refrigerators and magnetic heat pumps which are referred to interchangeably. Significant progress has been made on the development of engineering prototypes of cryogenic, nonregenerative magnetic refrigerators utilizing conductive heat transfer in the 0.1 K to 20 K temperature range. Advances have also been made in analysis of regenerative magnetic refrigerators and heat pumps utilizing the active magnetic regeneration (AMR) concept. Units based on AMR are being modeled, designed and/or built to operate in various temperature ranges including 1.8-4.5 K, 4-15 K, 15-85 K, and 270-320 K. The near room temperature units have been scaled to 50 kW as both refrigerators and heat pumps. The progress of magnetic refrigeration over the last three years is summarized and discussed

  4. Review of major plutonium pyrochemical technology

    International Nuclear Information System (INIS)

    Moser, W.S.; Navratil, J.D.

    1983-01-01

    The past twenty years have seen significant growth in the development and application of pyrochemical technology for processing of plutonium. For particular feedstocks and specific applications, non-aqueous high-temperature processes offer key advantages over conventional hydrometallurgical systems. Major processes in use today include: (1) direct oxide reduction for conversion of PuO 2 to metal, (2) molten salt extraction for americium removal from plutonium, (3) molten salt electrorefining for Pu purification, and (4) hydriding to remove plutonium from host substrates. This paper reviews current major pyrochemical processes from the classical calcination-hydrofluorination-bomb reduction sequence through new techniques under development. Each process is presented and brief descriptions of production equipment are given. 47 references, 5 figures

  5. Review of ORNL's MSR technology and status

    International Nuclear Information System (INIS)

    Toth, L.M.; Gat, U.; Del Cul, G.D.; Dai, S.; Williams, D.F.

    1996-01-01

    The current status of molten salt reactor development is discussed with reference to the experience from the Oak Ridge Molten Salt Reactor Experiment. Assessment of the future for this reactor system is reviewed with consideration of both advantages and disadvantages. Application of this concept to ADTT (accelerator driven transmutation technology) needs appears to be feasible by drawing on the MSRE experience. Key chemical considerations remain as: solubility, redox behavior, and chemical activity and their importance to ADTT planning is briefly explained. Priorities in the future development of molten salts for these applications are listed, with the foremost being the acceptance of the 2LiF-BeF 2 solvent system. 8 refs, 2 figs

  6. Technology for treatment of decontamination products

    International Nuclear Information System (INIS)

    Kavkhuta, G.A.; Rozdzyalovskaya, L.F.

    1994-01-01

    The research concerning the methods of management and processing of products generated as the result of post Chernobyl decontamination activities is being carried out by the Institute of Radioecological Problems of Belarus Academy of Science (IRP) in the framework of the Belarus National Programme. The main goal of this work is choice and development of an appropriate system for treatment of the decontamination radwastes, based on currently available information and experimental studies. This paper presents the technological schemes being studied for treating the post-Chernobyl liquid and solid wastes and will also briefly discuss the approach being used to settle a problem on collecting/management of low-level radioactive ash wastes, generated from the use of contaminated fuel

  7. Use of Computer and Mobile Technologies in the Treatment of Depression.

    Science.gov (United States)

    Callan, Judith A; Wright, Jesse; Siegle, Greg J; Howland, Robert H; Kepler, Britney B

    2017-06-01

    Major depression (MDD) is a common and disabling disorder. Research has shown that most people with MDD receive either no treatment or inadequate treatment. Computer and mobile technologies may offer solutions for the delivery of therapies to untreated or inadequately treated individuals with MDD. The authors review currently available technologies and research aimed at relieving symptoms of MDD. These technologies include computer-assisted cognitive-behavior therapy (CCBT), web-based self-help, Internet self-help support groups, mobile psychotherapeutic interventions (i.e., mobile applications or apps), technology enhanced exercise, and biosensing technology. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Biosensor technology for pesticides--a review.

    Science.gov (United States)

    Verma, Neelam; Bhardwaj, Atul

    2015-03-01

    Pesticides, due to their lucrative outcomes, are majorly implicated in agricultural fields for crop production enhancement. Due to their pest removal properties, pesticides of various classes have been designed to persist in the environment over a longer duration after their application to achieve maximum effectiveness. Apart from their recalcitrant structure and agricultural benefits, pesticides also impose acute toxicological effects onto the other various life forms. Their accumulation in the living system may prove to be detrimental if established in higher concentrations. Thus, their prompt and accurate analysis is a crucial matter of concern. Conventional techniques like chromatographic techniques (HPLC, GC, etc.) used for pesticides detection are associated with various limitations like stumpy sensitivity and efficiency, time consumption, laboriousity, requirement of expensive equipments and highly trained technicians, and many more. So there is a need to recruit the methods which can detect these neurotoxic compounds sensitively, selectively, rapidly, and easily in the field. Present work is a brief review of the pesticide effects, their current usage scenario, permissible limits in various food stuffs and 21st century advancements of biosensor technology for pesticide detection. Due to their exceptional performance capabilities, easiness in operation and on-site working, numerous biosensors have been developed for bio-monitoring of various environmental samples for pesticide evaluation immensely throughout the globe. Till date, based on sensing element (enzyme based, antibody based, etc.) and type of detection method used (Electrochemical, optical, and piezoelectric, etc.), a number of biosensors have been developed for pesticide detection. In present communication, authors have summarized 21st century's approaches of biosensor technology for pesticide detection such as enzyme-based biosensors, immunosensors, aptamers, molecularly imprinted polymers, and

  9. Reviews on Solid Oxide Fuel Cell Technology

    Directory of Open Access Journals (Sweden)

    Apinan Soottitantawat

    2009-02-01

    Full Text Available Solid Oxide Fuel Cell (SOFC is one type of high temperature fuel cell that appears to be one of the most promising technology to provide the efficient and clean energy production for wide range of applications (from small units to large scale power plants. This paper reviews the current status and related researches on SOFC technologies. In details, the research trend for the development of SOFC components(i.e. anode, electrolyte, cathode, and interconnect are presented. Later, the current important designs of SOFC (i.e. Seal-less Tubular Design, Segmented Cell in Series Design, Monolithic Design and Flat Plate Design are exampled. In addition, the possible operations of SOFC (i.e. external reforming, indirect internal reforming, and direct internal reforming are discussed. Lastly, the research studies on applications of SOFCs with co-generation (i.e. SOFC with Combined Heat and Power (SOFC-CHP, SOFC with Gas Turbine (SOFC-GT and SOFC with chemical production are given.

  10. Review of Biojet Fuel Conversion Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei-Cheng [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tao, Ling [National Renewable Energy Lab. (NREL), Golden, CO (United States); Markham, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhang, Yanan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tan, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Batan, Liaw [National Renewable Energy Lab. (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Biddy, Mary [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-07-01

    Biomass-derived jet (biojet) fuel has become a key element in the aviation industry’s strategy to reduce operating costs and environmental impacts. Researchers from the oil-refining industry, the aviation industry, government, biofuel companies, agricultural organizations, and academia are working toward developing commercially viable and sustainable processes that produce long-lasting renewable jet fuels with low production costs and low greenhouse gas emissions. Additionally, jet fuels must meet ASTM International specifications and potentially be a 100% drop-in replacement for the current petroleum jet fuel. The combustion characteristics and engine tests demonstrate the benefits of running the aviation gas turbine with biojet fuels. In this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways, are reviewed. The main challenges for each technology pathway, including feedstock availability, conceptual process design, process economics, life-cycle assessment of greenhouse gas emissions, and commercial readiness, are discussed. Although the feedstock price and availability and energy intensity of the process are significant barriers, biomass-derived jet fuel has the potential to replace a significant portion of conventional jet fuel required to meet commercial and military demand.

  11. Review of fill mining technology in Canada

    Energy Technology Data Exchange (ETDEWEB)

    Singh, K. H.; Hedley, D. G.F.

    1980-05-15

    The Canadian mining industry has a long history of being in the fore-front in developing new technology in underground hardrock mines. Examples include the development of hydraulic and cemented fills, undercut-and-fill, mechanized cut-and-fill, post pillar, vertical retreat and blasthole mining methods. The evolution of this technology is briefly described in an historical review. Backfill serves many functions, although it is generally considered in terms of its support capabilities. These functions, mainly related to the mining method used, are evaluated in regard to regional support, pillar support, fill roof, working floor, dilution control and waste disposal. With the advent of blasthole and vertical retreat methods for pillar recovery operations, the freestanding height of backfill walls has assumed greater importance. Consequently, more attention is being given to what fill properties are required to achieve fill wall exposures up to 25 m wide by 90 m high. With the large increases in energy costs, alternatives to partially replace Portland cement in fill are being examined. The validation of mining concepts and the interaction of backfill is perhaps best evaluated by in-situ measurements. Examples are given of stress, deformation and fill pressure measurements in longitudinal cut-and-fill, post pillar mining and blasthole stoping with delayed fill which were taken in several mines in Canada. Finally, the overall design procedure used in deciding mining method, stope and pillar dimensions, sequence of extraction, fill properties and support systems at a new mine is described.

  12. Effect of technological treatments on bovine lactoferrin: An overview.

    Science.gov (United States)

    Franco, Indira; Pérez, María Dolores; Conesa, Celia; Calvo, Miguel; Sánchez, Lourdes

    2018-04-01

    Lactoferrin (LF) is a multifunctional protein that exerts important activities in the neonate through its presence in milk, and also in other external mucosas, acting as a defense protein of innate immunity. The addition of bovine LF to infant formula and also to other functional products and cosmetics has increased during the last decades. Consequently, it is essential to know the effect that the technological processes, necessary to elaborate those products, have on LF activity. In this study, we have revised the effect of classical treatments on lactoferrin structure and activity, such as heat treatment or drying, and also of emerging technologies, like high pressure or pulsed electric field. The results of the studies included in this review indicate that LF stability is dependent on its level of iron-saturation and on the characteristics of the treatment media. Furthermore, the studies revised here reveal that the non-thermal treatments are interesting alternatives to the traditional ones, as they protect better the structure and activity of lactoferrin. It is also clear the need for research on LF encapsulation by different ways, to protect its properties before it reaches the intestine. All this knowledge would allow designing processes less harmful for LF, thus maintaining all its functionality. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Social Media and Mobile Technology for Cancer Prevention and Treatment

    Science.gov (United States)

    Prochaska, Judith J.; Coughlin, Steven S.; Lyons, Elizabeth J.

    2018-01-01

    OVERVIEW Given the number of lives affected by cancer and the great potential for optimizing well-being via lifestyle changes, patients, providers, health care systems, advocacy groups, and entrepreneurs are looking to digital solutions to enhance patient care and broaden prevention efforts. Thousands of health-oriented mobile websites and apps have been developed, with a majority focused upon lifestyle behaviors (e.g., exercise, diet, smoking). In this review, we consider the use and potential of social media and mHealth technologies for cancer prevention, cancer treatment, and survivorship. We identify key principles in research and practice, summarize prior reviews, and highlight notable case studies and patient resources. Further, with the potential for scaled delivery and broad reach, we consider application of social media and mHealth technologies in low-resource settings. With clear advantages for reach, social media and mHealth technologies offer the ability to scale and engage entire populations at low cost, develop supportive social networks, connect patients and providers, encourage adherence with cancer care, and collect vast quantities of data for advancing cancer research. Development efforts have been rapid and numerous, yet evaluation of intervention effects on behavior change and health outcomes are sorely needed, and regulation around data security issues is notably lacking. Attention to broader audiences is also needed, with targeted development for culturally diverse groups and non-English speakers. Further investment in research to build the evidence base and identify best practices will help delineate and actualize the potential of social media and mHealth technologies for cancer prevention and treatment. PMID:28561647

  14. Social Media and Mobile Technology for Cancer Prevention and Treatment.

    Science.gov (United States)

    Prochaska, Judith J; Coughlin, Steven S; Lyons, Elizabeth J

    2017-01-01

    Given the number of lives affected by cancer and the great potential for optimizing well-being via lifestyle changes, patients, providers, health care systems, advocacy groups, and entrepreneurs are looking to digital solutions to enhance patient care and broaden prevention efforts. Thousands of health-oriented mobile websites and apps have been developed, with a majority focused upon lifestyle behaviors (e.g., exercise, diet, smoking). In this review, we consider the use and potential of social media and mHealth technologies for cancer prevention, cancer treatment, and survivorship. We identify key principles in research and practice, summarize prior reviews, and highlight notable case studies and patient resources. Further, with the potential for scaled delivery and broad reach, we consider application of social media and mHealth technologies in low-resource settings. With clear advantages for reach, social media and mHealth technologies offer the ability to scale and engage entire populations at low cost, develop supportive social networks, connect patients and providers, encourage adherence with cancer care, and collect vast quantities of data for advancing cancer research. Development efforts have been rapid and numerous, yet evaluation of intervention effects on behavior change and health outcomes are sorely needed, and regulation around data security issues is notably lacking. Attention to broader audiences is also needed, with targeted development for culturally diverse groups and non-English speakers. Further investment in research to build the evidence base and identify best practices will help delineate and actualize the potential of social media and mHealth technologies for cancer prevention and treatment.

  15. Stem cells technology: a powerful tool behind new brain treatments.

    Science.gov (United States)

    Duru, Lucienne N; Quan, Zhenzhen; Qazi, Talal Jamil; Qing, Hong

    2018-06-18

    Stem cell research has recently become a hot research topic in biomedical research due to the foreseen unlimited potential of stem cells in tissue engineering and regenerative medicine. For many years, medicine has been facing intense challenges, such as an insufficient number of organ donations that is preventing clinicians to fulfill the increasing needs. To try and overcome this regrettable matter, research has been aiming at developing strategies to facilitate the in vitro culture and study of stem cells as a tool for tissue regeneration. Meanwhile, new developments in the microfluidics technology brought forward emerging cell culture applications that are currently allowing for a better chemical and physical control of cellular microenvironment. This review presents the latest developments in stem cell research that brought new therapies to the clinics and how the convergence of the microfluidics technology with stem cell research can have positive outcomes on the fields of regenerative medicine and high-throughput screening. These advances will bring new translational solutions for drug discovery and will upgrade in vitro cell culture to a new level of accuracy and performance. We hope this review will provide new insights into the understanding of new brain treatments from the perspective of stem cell technology especially regarding regenerative medicine and tissue engineering.

  16. Reviews of accelerator science and technology

    CERN Document Server

    Chou, Weiren

    2008-01-01

    Particle accelerators are a major invention of the 20th century. In the last eight decades, they have evolved enormously and have fundamentally changed the way we live, think and work. Accelerators are the most powerful microscopes for viewing the tiniest inner structure of cells, genes, molecules, atoms and their constituents such as protons, neutrons, electrons, neutrinos and quarks. This opens up a whole new world for materials science, chemistry and molecular biology.Accelerators with megawatt beam power may ultimately solve a critical problem faced by our society, namely, the treatment of nuclear waste and the supply of an alternative type of energy. There are also tens of thousands of small accelerators all over the world. They are used every day for medical imaging, cancer therapy, radioisotope production, high-density chip-making, mass spectrometry, cargo x-ray/gamma-ray imaging, detection of explosives and illicit drugs, and weapons. This volume provides a comprehensive review of this driving and fas...

  17. Conservative treatment of sciatica : A systematic review

    NARCIS (Netherlands)

    Vroomen, PCAJ; de Krom, MCTFM; Slofstra, PD; Knottnerus, JA

    2000-01-01

    Most patients with sciatica (often caused by disc herniations) are managed conservatively at first. The natural course seems to be favorable. The additional value of many conservative therapies remains controversial. Because a systematic review of the conservative treatment of sciatica is lacking,

  18. Musical hallucinations : Review of treatment effects

    NARCIS (Netherlands)

    Coebergh, Jan A. F.; Lauw, R. F.; Bots, R.; Sommer, I. E. C.; Blom, J. D.

    2015-01-01

    Background: Despite an increased scientific interest in musical hallucinations over the past 25 years, treatment protocols are still lacking. This may well be due to the fact that musical hallucinations have multiple causes, and that published cases are relatively rare. Objective: To review the

  19. Musical hallucinations : review of treatment effects

    NARCIS (Netherlands)

    Coebergh, Jan A F; Lauw, R F; Bots, R; Sommer, I E C; Blom, J D

    2015-01-01

    BACKGROUND: Despite an increased scientific interest in musical hallucinations over the past 25 years, treatment protocols are still lacking. This may well be due to the fact that musical hallucinations have multiple causes, and that published cases are relatively rare. OBJECTIVE: To review the

  20. Surgically facilitated orthodontic treatment : A systematic review

    NARCIS (Netherlands)

    Hoogeveen, Eelke J.; Jansma, Johan; Ren, Yijin

    INTRODUCTION: Corticotomy and dental distraction have been proposed as effective and safe methods to shorten orthodontic treatment duration in adolescent and adult patients. A systematic review was performed to evaluate the evidence supporting these claims. METHODS: PubMed, Embase, and Cochrane

  1. Electron beam flue gas treatment process. Review

    International Nuclear Information System (INIS)

    Honkonen, V.A.

    1996-01-01

    The basis of the process for electron beam flue gas treatment are presented in the report. In tabular form the history of the research is reviewed. Main dependences of SO 2 and NO x removal efficiencies on different physico-chemical parameters are discussed. Trends concerning industrial process implementation are presented in the paper,finally. (author). 74 refs, 11 figs, 1 tab

  2. Treatment of Cutaneous Pseudolymphoma: A Systematic Review

    Directory of Open Access Journals (Sweden)

    Diana Miguel

    2017-12-01

    Full Text Available Cutaneous pseudolymphoma (CPL is a reactive polyclonal T- or B-cell lymphoproliferative process. CPL may appear as localized or disseminated skin lesions. While most cases of CPL are idiopathic, they may also occur as a response to, for example, contact dermatitis, arthropod reactions, and bacterial infections. CPL can be classified based on its clinical features, but all variants have similar histopathological patterns of either predominantly B-cell infiltrates, T-cell infiltrates, or mixed T/B-cell infiltrates. The prognosis of CPL is good, but the underlying disease process should be taken into account. If an antigenic stimulus is identified, it should be removed. In patients with idiopathic CPL, a close follow-up control strategy should be adopted. The aim of this systematic review is to summarize all reported treatments for CPL. The review was based on articles from the PubMed database, using the query “skin pseudolymphoma treatment”, English and German, about “human” subjects, and published between 1990 and 2015 documenting adequate treatment and/or aetiology. Mainly individual case reports and small case series were found. Treatment options include topical and intralesional agents, systemic agents, and physical modalities. The final part of the review proposes a treatment algorithm for CPL according to each aetiology, based on the literature of the last 25 years. Future research should focus on randomized controlled trials and studies on long-term outcomes, which were not identified in the current review.

  3. Membrane technologies for liquid radioactive waste treatment

    International Nuclear Information System (INIS)

    Chmielewski, A.G.; Harasimowicz, M.; Zakrzewska-Trznadel, G.

    1998-01-01

    At Institute of Nuclear Chemistry and Technology (INCT) the membrane method for purification of radioactive wastes applied such processes as ultrafiltration (UF), 'seeded' ultrafiltration and reverse osmosis (RO) was developed. On the basis of the results obtained in laboratory experiments the pilot plant for radioactive effluents treatment was built. The plant was composed of UF unit (AMICON H 26P30 capillary module) and two RO units (NITTO NTR 739 HF S-4 spiral wound LPRO modules). The capacity of the pilot plant was up to 200 L/h and the specific activity of wastes purified in the system - below 10 4 Bq/L. Decontamination factor for entire system is higher than 5 x10 3 . Another possibility for radioactive wastes treatment is membrane distillation (MD), non-isothermal process employing hydrophobic polymer membrane, which is developed at INCT now. Preliminary tests with liquid radwaste were carried out on laboratory unit with permeation test-cell holding flat sheet membrane. As a hydrophobic barrier membranes made of two polymers were used: polytetrafluoroethylene (PTFE) and polypropylene (PP). The process was arranged in direct contact membrane distillation configuration. The permeate condensed directly in the cold stream (distilled water) and retentate was enriched in radionuclides. The further experiments carried out with capillary module BFMF 06-30-33 (Euro-Sep Ltd.) with polypropylene capillaries, diameter 0.33 mm and cut off 0.6 μm proved previous results. A pilot plant employing GORE-TEX membrane distillation was constructed. The plant can clean the low-level radioactive wastes from nuclear centre, at a throughput about 0.05 m 3 /h

  4. Analytical review of modern information education technologies

    OpenAIRE

    Светлана Викторовна Зенкина; О П Панкратова

    2014-01-01

    This article discusses and analyzes the modern information education technologies, which are seen as the priority to use in the modern information educational environment (Internet-based educational technologies, distance education, media education, e-Learning technologies, smart-education technologies).

  5. Diagnosis and treatment of phagophobia: a review.

    Science.gov (United States)

    Baijens, Laura W J; Koetsenruijter, Krista; Pilz, Walmari

    2013-06-01

    This narrative review summarizes published studies on diagnostic examinations and therapeutic interventions for phagophobia. The electronic databases Embase, PubMed, PsycINFO(®), and The Cochrane Library were used. The literature search was limited to publications in the English, German, French, Spanish, or Dutch language. The original articles are summarized in the present narrative review. The body of literature on phagophobia and swallowing fear remains very limited; only 12 studies were found. The present narrative review discovered heterogeneity in the definitions of phagophobia or similar syndromes. A systematic review, including a qualitative analysis, was planned but not carried out as studies were not of sufficient quality to warrant doing so. All the studies had severe methodological shortcomings. In general, the conclusions could not be compared across the studies because of the different study designs, small populations, different ways of evaluating and treating phagophobia, and complex combinations of treatments. A general conclusion is provided.

  6. Legal aspects of auxillary reproductive technologies in infertility treatment

    OpenAIRE

    V.Yu. Albitskiy; N.D. Odinayeva; V.O. Mansimova

    2011-01-01

    The article presents several aspects of legal regulation of auxillary reproductive technologies in treatment of infertility in Russia and other countries.Key words: auxillary reproductive technologies, method of extracorporeal fertilization, newborn, premature newborn, multiple pregnancy, embryo, infertility, law.

  7. Multi-Criteria Sustainability Assessment of Urban Sludge Treatment Technologies

    DEFF Research Database (Denmark)

    An, Da; Xi, Beidou; Ren, Jingzheng

    2017-01-01

    to determine the weights of the criteria for sustainability assessment, and extension theory was used to prioritize the alternative technologies for the treatment of urban sewage sludge and grade their sustainability performances. An illustrative case including three technologies (compositing, incineration...

  8. Radioactive waste treatment technology at Czech nuclear power plants

    International Nuclear Information System (INIS)

    Kulovany, J.

    2001-01-01

    This presentation describes the main technologies for the treatment and conditioning of radioactive wastes at Czech nuclear power plants. The main technologies are bituminisation for liquid radioactive wastes and supercompaction for solid radioactive wastes. (author)

  9. SARS: systematic review of treatment effects.

    Directory of Open Access Journals (Sweden)

    Lauren J Stockman

    2006-09-01

    Full Text Available BACKGROUND: The SARS outbreak of 2002-2003 presented clinicians with a new, life-threatening disease for which they had no experience in treating and no research on the effectiveness of treatment options. The World Health Organization (WHO expert panel on SARS treatment requested a systematic review and comprehensive summary of treatments used for SARS-infected patients in order to guide future treatment and identify priorities for research. METHODS AND FINDINGS: In response to the WHO request we conducted a systematic review of the published literature on ribavirin, corticosteroids, lopinavir and ritonavir (LPV/r, type I interferon (IFN, intravenous immunoglobulin (IVIG, and SARS convalescent plasma from both in vitro studies and in SARS patients. We also searched for clinical trial evidence of treatment for acute respiratory distress syndrome. Sources of data were the literature databases MEDLINE, EMBASE, BIOSIS, and the Cochrane Central Register of Controlled Trials (CENTRAL up to February 2005. Data from publications were extracted and evidence within studies was classified using predefined criteria. In total, 54 SARS treatment studies, 15 in vitro studies, and three acute respiratory distress syndrome studies met our inclusion criteria. Within in vitro studies, ribavirin, lopinavir, and type I IFN showed inhibition of SARS-CoV in tissue culture. In SARS-infected patient reports on ribavirin, 26 studies were classified as inconclusive, and four showed possible harm. Seven studies of convalescent plasma or IVIG, three of IFN type I, and two of LPV/r were inconclusive. In 29 studies of steroid use, 25 were inconclusive and four were classified as causing possible harm. CONCLUSIONS: Despite an extensive literature reporting on SARS treatments, it was not possible to determine whether treatments benefited patients during the SARS outbreak. Some may have been harmful. Clinical trials should be designed to validate a standard protocol for dosage

  10. Constructed wetlands for wastewater treatment in cold climate - A review.

    Science.gov (United States)

    Wang, Mo; Zhang, Dong Qing; Dong, Jian Wen; Tan, Soon Keat

    2017-07-01

    Constructed wetlands (CWs) have been successfully used for treating various wastewaters for decades and have been identified as a sustainable wastewater management option worldwide. However, the application of CW for wastewater treatment in frigid climate presents special challenges. Wetland treatment of wastewater relies largely on biological processes, and reliable treatment is often a function of climate conditions. To date, the rate of adoption of wetland technology for wastewater treatment in cold regions has been slow and there are relatively few published reports on CW applications in cold climate. This paper therefore highlights the practice and applications of treatment wetlands in cold climate. A comprehensive review of the effectiveness of contaminant removal in different wetland systems including: (1) free water surface (FWS) CWs; (2) subsurface flow (SSF) CWs; and (3) hybrid wetland systems, is presented. The emphasis of this review is also placed on the influence of cold weather conditions on the removal efficacies of different contaminants. The strategies of wetland design and operation for performance intensification, such as the presence of plant, operational mode, effluent recirculation, artificial aeration and in-series design, which are crucial to achieve the sustainable treatment performance in cold climate, are also discussed. This study is conducive to further research for the understanding of CW design and treatment performance in cold climate. Copyright © 2017. Published by Elsevier B.V.

  11. Treatment of textile wastewater with membrane bioreactor: A critical review.

    Science.gov (United States)

    Jegatheesan, Veeriah; Pramanik, Biplob Kumar; Chen, Jingyu; Navaratna, Dimuth; Chang, Chia-Yuan; Shu, Li

    2016-03-01

    Membrane bioreactor (MBR) technology has been used widely for various industrial wastewater treatments due to its distinct advantages over conventional bioreactors. Treatment of textile wastewater using MBR has been investigated as a simple, reliable and cost-effective process with a significant removal of contaminants. However, a major drawback in the operation of MBR is membrane fouling, which leads to the decline in permeate flux and therefore requires membrane cleaning. This eventually decreases the lifespan of the membrane. In this paper, the application of aerobic and anaerobic MBR for textile wastewater treatment as well as fouling and control of fouling in MBR processes have been reviewed. It has been found that long sludge retention time increases the degradation of pollutants by allowing slow growing microorganisms to establish but also contributes to membrane fouling. Further research aspects of MBR for textile wastewater treatment are also considered for sustainable operations of the process. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Assisted reproductive technology treatment in women with severe eating disorders

    DEFF Research Database (Denmark)

    Assens, Maria; Ebdrup, Ninna H; Pinborg, Anja

    2015-01-01

    INTRODUCTION: This national retrospective cohort study investigates the prevalence of women with severe eating disorders in assisted reproductive technology (ART) treatment compared with an age-matched background population without ART treatment. It assesses the frequency distribution of the firs...

  13. 2013 Building Technologies Office Program Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-11-01

    The 2013 Building Technologies Office Program Peer Review Report summarizes the results of the 2013 Building Technologies Office (BTO) peer review, which was held in Washington, D.C., on April 2–4, 2013. The review was attended by over 300 participants and included presentations on 59 BTO-funded projects: 29 from BTO’s Emerging Technologies Program, 20 from the Commercial Buildings Integration Program, 6 from the Residential Buildings Integration Program, and 4 from the Building Energy Codes Program. This report summarizes the scores and comments provided by the independent reviewers for each project.

  14. Thermal treatment technology at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Hillary, J.M.

    1994-01-01

    Recent surveys of mixed wastes in interim storage throughout the 30-site Department of Energy complex indicate that only 12 of those sites account for 98% of such wastes by volume. Current inventories at the Idaho National Engineering Laboratory (INEL) account for 38% of total DOE wastes in interim storage, the largest of any single site. For a large percentage of these waste volumes, as well as the substantial amounts of buried and currently generated wastes, thermal treatment processes have been designated as the technologies of choice. Current facilities and a number of proposed strategies exist for thermal treatment of wastes of this nature at the INEL. High-level radioactive waste is solidified in the Waste Calciner Facility at the Idaho Central Processing Plant. Low-level solid wastes until recently have been processed at the Waste Experimental Reduction Facility (WERF), a compaction, size reduction, and controlled air incineration facility. WERF is currently undergoing process upgrading and RCRA Part B permitting. Recent systems studies have defined effective strategies, in the form of thermal process sequences, for treatment of wastes of the complex and heterogeneous nature in the INEL inventory. This presentation reviews the current status of operating facilities, active studies in this area, and proposed strategies for thermal treatment of INEL wastes

  15. Deviation Among Technology Reviews: An Informative Enrichment of Technology Evolution Theory for Marketing

    OpenAIRE

    Sood, Ashish; Stremersch, Stefan

    2010-01-01

    textabstractUnderstanding technological change is of critical importance to marketers, as it bears new markets, new brands, new customers, and new market leaders. This paper examines the deviation among reviews of a technology’s performance and its consequences for inferences on technology evolution patterns. The basic premise of the current paper is that technology evolution literature, while highly relevant, is misguided in that it ignores potential deviation among technology reviews. Using...

  16. Energy & technology review, November--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    Quirk, W.J.; Canada, J.; de Vore, L.; Gleason, K.; Kirvel, R.D.; Kroopnick, H.; McElroy, L. [eds.

    1993-11-01

    For the 40-plus years of the Cold War, both the United States and the Soviet Union built up nuclear stockpiles of tens of thousands of weapons. Now, as the Cold War has ended and tensions between the superpowers have subsided, the US faces the task of significantly reducing its nuclear arsenal. Many thousands of nuclear weapons are being removed from the stockpile as a result of recent treaties and unilateral decisions. This issue of Energy and Technology Review describes the Laboratory`s role in the nation`s effort to dismantle these weapons safely and rapidly. The dismantlement of the United States` nuclear weapons takes place at the Department of Energy`s Pantex facility near Amarillo, Texas. The first article in this issue summarizes the Laboratory`s involvement in dismantling Livermore-designed nuclear weapons. LLNL (like Los Alamos) has responsibility for the weapons it designed, from design concept to retirement. In the past, the responsibilities ended when the weapon was retired from the stockpile. Now however, the role has been extended to include dismantlement. The second article reports on an incident that occurred in November 1992, in which the pit of a W48 warhead cracked during dismantlement. The Laboratory was called upon to handle the pit safely and determine the causes of the cracking. The third article explores a variety of methods proposed for reusing the high explosives after they are removed from the weapon. In the past, Laboratory work on nuclear weapons focused primarily on design and development. However, as the size and composition of the US stockpile changes with evolving international conditions, they will be called upon with increasing frequency to provide the scientific and technical expertise needed to dismantle the nation`s retired nuclear weapons safely and efficiently.

  17. Science and Technology Review, June 1999

    International Nuclear Information System (INIS)

    Eimerl, D

    1999-01-01

    The following two abstracts are for the 2 feature stories in this issue of ''Science and Technology Review''. (1) ''Forewarnings of Coming Hazards''--The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore is an emergency response organization chartered to aid Department of Energy and Department of Defense sites when radioactive or toxic material is released into the atmosphere. Developed from studies beginning in the 1960s, it became a funded operational program in the late 1970s. Using an emergency response modeling system now in its third generation, ARAC scientists predict how atmospheric releases that could affect public health and safety will disperse. The ARAC system has evolved through experience gained during regular training exercises and in over 160 alerts and emergency responses to date. The work of ARAC scientists described in the article demonstrates the different modeling challenges they encounter in preparing for and responding to a variety of atmospheric emergencies. (2) ''Unraveling the Mystery of Detonation''--Laboratory experts in the detonation of high explosives are putting the computational power of the Accelerated Strategic Computing Initiative (ASCI) to the test. Their research centers on insensitive explosives, whose behavior during detonation is slower and more complex than that of sensitive explosives. The article features three research projects, which are exploring detonation from different angles: the initiation phase, the molecules produced during detonation, and further development of CHEETAH, a thermochemical detonation code. All research teams are using ASCI supercomputers, which have increased their ability to simulate the detonation process by a factor of 100,000

  18. Adhesive capsulitis: review of imaging and treatment

    International Nuclear Information System (INIS)

    Harris, Guy; Bou-Haider, Pascal; Harris, Craig

    2013-01-01

    Adhesive capsulitis is one of the most common conditions affecting the shoulder; however, early clinical diagnosis can be challenging. Treatment is most effective when commenced prior to the onset of capsular thickening and contracture; consequently, the role of imaging is increasing. The aim of this review is to demonstrate the typical imaging appearances of adhesive capsulitis and to examine some of the evidence regarding each of these imaging modalities. An evaluation of the various management options available to the clinician is also presented.

  19. Technologies for the Study of Speech: Review and an Application

    Science.gov (United States)

    Babatsouli, Elena

    2015-01-01

    Technologies used for the study of speech are classified here into non-intrusive and intrusive. The paper informs on current non-intrusive technologies that are used for linguistic investigations of the speech signal, both phonological and phonetic. Providing a point of reference, the review covers existing technological advances in language…

  20. Nuclear Technology Review 2013. Report by the Director General

    International Nuclear Information System (INIS)

    2013-01-01

    In response to requests by Member States, the Secretariat produces a comprehensive Nuclear Technology Review each year. Attached is this year's report, which highlights notable developments principally in 2012. The Nuclear Technology Review 2013 covers the following areas: power applications, atomic and nuclear data, accelerators and research reactors, and nuclear sciences and applications. Additional documentation associated with the Nuclear Technology Review 2013 is available on the Agency's website1 in English on nuclear hydrogen production technology and preliminary lessons learned from the Fukushima Daiichi accident for advanced nuclear power plant technology development. Information on the IAEA's activities related to nuclear science and technology can also be found in the IAEA's Annual Report 2012 (GC(57)/3), in particular the Technology section, and the Technical Cooperation Report for 2012 (GC(57)/INF/4). The document has been modified to take account, to the extent possible, of specific comments by the Board of Governors and other comments received from Member States. (author)

  1. Musical hallucinations: review of treatment effects

    Directory of Open Access Journals (Sweden)

    Jan eCoebergh

    2015-06-01

    Full Text Available AbstractBackground: Despite an increased scientific interest in musical hallucinations throughout the past 25 years, treatment protocols are still lacking. This may well be due to the fact that musical hallucinations have multiple causes, and that published cases are relatively rare.Objective: To review the effects of published treatment methods for musical hallucinations.Methods: A literature search yielded 175 articles discussing a total number of 516 cases, of which 147 articles discussed treatment in 276 individuals. We analysed the treatment results in relation to the aetiological factor considered responsible for the mediation of the musical hallucinations, i.e., idiopathic/hypoacusis, psychiatric disorder, brain lesion and other pathology, epilepsy or intoxication.Results: Musical hallucinations can disappear without intervention. When hallucinations are bearable, patients can be reassured without any other treatment. However, in other patients musical hallucinations are so disturbing that treatment is indicated. Distinct aetiological groups appear to respond differently to treatment. In the hypoacusis group, treating the hearing impairment can yield significant improvement and coping strategies (e.g. more acoustic stimulation are frequently helpful. Pharmacological treatment methods can also be successful, with antidepressants being more helpful than antiepileptics (which are still better than antipsychotics. The limited use of acetylcholinesterase inhibitors has looked promising. Musical hallucinations occurring as part of a psychiatric disorder tend to respond well to psychopharmacological treatments targeting the underlying disorder. Musical hallucinations experienced in the context of brain injuries and epilepsy tend to respond well to antiepileptics, but their natural course is often benign, irrespective of any pharmacological treatment. When intoxication is the main aetiological factor, it is important to stop or switch the

  2. Selenium: environmental significance, pollution, and biological treatment technologies.

    Science.gov (United States)

    Tan, Lea Chua; Nancharaiah, Yarlagadda V; van Hullebusch, Eric D; Lens, Piet N L

    2016-01-01

    Selenium is an essential trace element needed for all living organisms. Despite its essentiality, selenium is a potential toxic element to natural ecosystems due to its bioaccumulation potential. Though selenium is found naturally in the earth's crust, especially in carbonate rocks and volcanic and sedimentary soils, about 40% of the selenium emissions to atmospheric and aquatic environments are caused by various industrial activities such as mining-related operations. In recent years, advances in water quality and pollution monitoring have shown that selenium is a contaminant of potential environmental concern. This has practical implications on industry to achieve the stringent selenium regulatory discharge limit of 5μgSeL(-1) for selenium containing wastewaters set by the United States Environmental Protection Agency. Over the last few decades, various technologies have been developed for the treatment of selenium-containing wastewaters. Biological selenium reduction has emerged as the leading technology for removing selenium from wastewaters since it offers a cheaper alternative compared to physico-chemical treatments and is suitable for treating dilute and variable selenium-laden wastewaters. Moreover, biological treatment has the advantage of forming elemental selenium nanospheres which exhibit unique optical and spectral properties for various industrial applications, i.e. medical, electrical, and manufacturing processes. However, despite the advances in biotechnology employing selenium reduction, there are still several challenges, particularly in achieving stringent discharge limits, the long-term stability of biogenic selenium and predicting the fate of bioreduced selenium in the environment. This review highlights the significance of selenium in the environment, health, and industry and biotechnological advances made in the treatment of selenium contaminated wastewaters. The challenges and future perspectives are overviewed considering recent

  3. SOLUTIONS TO OVERCOME BARRIERS TO IMPLEMENTATION OF TREATMENT TECHNOLOGIES

    Science.gov (United States)

    To make treatment a viable option for remediation you must first identify the barriers to implementing treatment. The primary barrier is economics. Treatment options are relatively expensive and there is a lack of funds for treatment. The cost of technologies can be lowered by 1)...

  4. 2015 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-11-01

    The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 8-12, 2015, in Arlington, Virginia. The review encompassed all of the work done by the FCTO and the VTO: 258 individual activities were reviewed for VTO, by 170 reviewers. A total of 1,095 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  5. 2014 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-11-01

    The 2014 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 16-20, 2014, in Washington, DC. The review encompassed all of the work done by the FCTO and the VTO: a total of 295 individual activities were reviewed for VTO, by a total of 179 reviewers. A total of 1,354 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  6. 2013 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-10-01

    The 2013 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held May 13-17, 2013, in Crystal City, Virginia. The review encompassed all of the work done by the FCTO and the VTO: a total of 287 individual activities were reviewed for VTO, by a total of 187 reviewers. A total of 1,382 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  7. Inhibition of Anaerobic Biological Treatment: A Review

    Science.gov (United States)

    Hou, Li; Ji, Dandan; Zang, Lihua

    2018-01-01

    Anaerobic digestion is a method for treating living and industrial wastewater by anaerobic degradation of organic compounds, which can produce biogas (carbon dioxide and methane mixture) and microbial biomass. And biogas as a renewable resource, can replace the use of ore fuel. In the process of anaerobic digestion, the problems of low methane yield and unstable reaction process are often encountered, which limits the widespread use of this technology. Various inhibitors are the main limiting factors for anaerobic digestion. In this paper, the main factors limiting anaerobic digestion are reviewed, and the latest research progress is introduced.

  8. Autism Treatment and Family Support Models Review

    Directory of Open Access Journals (Sweden)

    Mehrnoush Esbati

    2009-04-01

    Full Text Available Autism is a lifelong neurological disability of unknown etiology. The criteria for a diagnosis of autism are based on a triad of impairments in social interaction, communication and a lack of flexibility in thinking and behavior There are several factors which are likely to contribute to this variation including the definition of autism and variability in diagnosis amongst professionals, however anecdotally there appears to have been a steadily increasing demand for services. The purpose of this review of research literature relating to the management and treatment of children with autism is to identify the most effective models of best practice. The review includes Comparative evidence supporting a range of treatment and intervention models, across the range of individuals included within autism spectrum disorders, psychodynamic treatment/management which are based on the assumption that autism is the result of emotional damage to the child, usually because of failure to develop a close attachment to parents, especially the mother, biological treatments, educational and behavioral interventions, communication therapies, cost benefits and supporting families.The research is examined for evidence to support best practice models in supporting families at the time of diagnosis and assessment and an overview of the nature of comprehensive supports that help reduce stresses that may be experienced by families of a child with autism and promote inclusion in community activities.

  9. Ultrasonication and food technology: A review

    OpenAIRE

    Ishrat Majid; Gulzar Ahmad Nayik; Vikas Nanda

    2015-01-01

    With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extractio...

  10. Mozart ear: diagnosis, treatment, and literature review.

    Science.gov (United States)

    Yamashita, Ken; Yotsuyanagi, Takatoshi; Saito, Tamotsu; Isogai, Noritaka; Mori, Hiromasa; Itani, Yoshihito

    2011-11-01

    Mozart ear is a congenital auricular deformity, which is mainly characterized by a bulging appearance of the anterosuperior portion of the auricle, a convexly protruded cavum conchae, and a slit-like narrowing of the orifice of the external auditory meatus. It is said to be uncommon, and because no one has yet fully described neither the disease nor the treatment, the concept of Mozart ear has not been unified. This report describes a case of a 13-year-old girl presented with an unusual congenital deformity which showed the features of Mozart ear. It is an extremely rare deformity that only about 4 clinical cases have been reported in medical literature thereby a treatment method has not been fully discussed. For surgical correction of our cases, we excised deformed conchal cartilage, turned it over, regrafted, and maintained a cosmetically positive result. We also reviewed and described the origin, current concept, and treatment method of Mozart ear.

  11. Smart storage technologies applied to fresh foods: A review.

    Science.gov (United States)

    Wang, Jingyu; Zhang, Min; Gao, Zhongxue; Adhikari, Benu

    2017-06-30

    Fresh foods are perishable, seasonal and regional in nature and their storage, transportation, and preservation of freshness are quite challenging. Smart storage technologies can online detection and monitor the changes of quality parameters and storage environment of fresh foods during storage, so that operators can make timely adjustments to reduce the loss. This article reviews the smart storage technologies from two aspects: online detection technologies and smartly monitoring technologies for fresh foods. Online detection technologies include electronic nose, nuclear magnetic resonance (NMR), near infrared spectroscopy (NIRS), hyperspectral imaging and computer vision. Smartly monitoring technologies mainly include some intelligent indicators for monitoring the change of storage environment. Smart storage technologies applied to fresh foods need to be highly efficient and nondestructive and need to be competitively priced. In this work, we have critically reviewed the principles, applications, and development trends of smart storage technologies.

  12. Water treatment for fossil fuel power generation - technology status report

    International Nuclear Information System (INIS)

    2006-01-01

    This technology status report focuses on the use of water treatment technology in fossil fuel power plants. The use of polymeric ion exchange resins for deionization of water, the currently preferred use of ion exchange for economically treating water containing low dissolved salts, the use of low pressure high-flux membranes, membrane microfiltration, and reverse osmosis are discussed. Details are given of the benefits of the technologies, water use at power plants, the current status of water treatment technologies, and the potential for future developments, along with power plant market trends and potentials, worldwide developments, and UK capabilities in water treatment plant design and manufacturing

  13. Radioactive sodium waste treatment and conditioning. Review of main aspects

    International Nuclear Information System (INIS)

    2007-01-01

    This publication reviews the main aspects relating to the treatment and conditioning of radioactive sodium waste. This waste arises from the operation of liquid metal fast reactors (LMFRs). In this type of reactor, sodium (Na) or sodium-potassium alloys (NaK) are used as a low-effect neutron moderating coolant medium for extracting and transferring thermal energy from the core and they represent a significant technical and safety challenge during operation and decommissioning. This publication provides the reader with technologically oriented information on the present status of sodium waste management approaches and recent achievements related to treatment and conditioning, with the objective of facilitating planning and preparatory work for the decommissioning of LMFRs. This publication provides a comprehensive review of the hazards associated with sodium waste management. Given the large quantities of sodium waste arising during decommissioning or reactor refurbishment, as well as the challenges and varied techniques associated with removal of 100% of all sodium and NaK bulk quantities and residues during decommissioning, a hazards review and analysis is a critical component in planning the dismantling and waste management activities. Roughly half of this publication focuses on sodium waste generating, handling and treatment processes. This includes draining sodium and NaK from plant systems; in situ treatment of residual sodium; cutting techniques for pumps, valves, piping and other components; cleaning of components; potential reuse of sodium; and removal of selected radionuclides from sodium waste with the objective of reducing the waste classification or converting it to exempt waste. The focus is on proven techniques and technologies, and each discussed method includes a review of the associated principle or theory, practical applications, advantages and disadvantages, limitations, industry experience, and final waste products. A review is provided of final

  14. Technology development multidimensional review for engineering and technology managers

    CERN Document Server

    Neshati, Ramin; Watt, Russell; Eastham, James

    2014-01-01

    Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment.  This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier.  The first part emphasizes decision making.  The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.

  15. Review of tritiated water concentration technology

    International Nuclear Information System (INIS)

    Ma Hongbin

    2014-01-01

    In order to cooperate with the construction of the spent fuel reprocessing plant in China, the research and application status of tritiated water concentration technology at home and abroad were summarized. Some suggestions for the technology research route in China were put forward. (author)

  16. SEQUENCING BATCH REACTOR: A PROMISING TECHNOLOGY IN WASTEWATER TREATMENT

    Directory of Open Access Journals (Sweden)

    A. H. Mahvi

    2008-04-01

    Full Text Available Discharge of domestic and industrial wastewater to surface or groundwater is very dangerous to the environment. Therefore treatment of any kind of wastewater to produce effluent with good quality is necessary. In this regard choosing an effective treatment system is important. Sequencing batch reactor is a modification of activated sludge process which has been successfully used to treat municipal and industrial wastewater. The process could be applied for nutrients removal, high biochemical oxygen demand containing industrial wastewater, wastewater containing toxic materials such as cyanide, copper, chromium, lead and nickel, food industries effluents, landfill leachates and tannery wastewater. Of the process advantages are single-tank configuration, small foot print, easily expandable, simple operation and low capital costs. Many researches have been conducted on this treatment technology. The authors had been conducted some investigations on a modification of sequencing batch reactor. Their studies resulted in very high percentage removal of biochemical oxygen demand, chemical oxygen demand, total kjeldahl nitrogen, total nitrogen, total phosphorus and total suspended solids respectively. This paper reviews some of the published works in addition to experiences of the authors.

  17. Experience in Reviewing Small Modular Reactor Technology

    International Nuclear Information System (INIS)

    Ahmad Nabil Abdul Rahim; Alfred, S.L.; Phongsakorn, P.

    2015-01-01

    Malaysia is in the stage of conducting Preliminary Technical Feasibility Study for the Deployment of Small Modular Reactor (SMR). There are different types of SMR, some already under construction in Argentina (CAREM) and China (HTR-PM) - (light water reactor and high temperature reactor technologies), others with near-term deployment such as SMART in South Korea, ACP100 in China, mPower and NuScale in the US, and others with longer term deployment prospects (liquid-metal cooled reactor technologies). The study was mainly to get an overview of the technology available in the market. The SMR ranking in the study was done through listing out the most deployable technology in the market according to their types. As a new comer country, the proven technology with an excellent operation history will usually be the main consideration points. (author)

  18. Drainage treatment technology for water pollution prevention

    Energy Technology Data Exchange (ETDEWEB)

    Ebise, Sen' ichi

    1988-03-01

    Drainage is purified either at terminal treatment plants or by septic tanks for sewage. At terminal treatment plants, sewage is purified by activated sludge prosessing or by biological treatment equipment. By the normal activated sludge processing, only 20 - 30 % of nitrogen and phosphur can be removed. To solve this problem, many advanced processing systems have been employed, representative systems being coagulating sedimentation, rapid filtration, recirculating nitro-denitrification, etc. The coagulating sedimentation is a treatment process in which such metallic salt coagulations as aluminum, iron, etc. are injected and mixed with sewage, and then phosphur and the like are sedimented in the form of grains. The rapid filtration requires no large space, and can reliably remove suspended matter. For large scale septic tank processing system, advance treatment processing is supplemented to improve the quality of treated water. Among other systems of sewage purification are oxidized channel, oxidized pond, soil treatment, etc. (2 figs, 2 refs)

  19. Applications of nanotechnology in wastewater treatment--a review.

    Science.gov (United States)

    Bora, Tanujjal; Dutta, Joydeep

    2014-01-01

    Water on Earth is a precious and finite resource, which is endlessly recycled in the water cycle. Water, whose physical, chemical, or biological properties have been altered due to the addition of contaminants such as organic/inorganic materials, pathogens, heavy metals or other toxins making it unsafe for the ecosystem, can be termed as wastewater. Various schemes have been adopted by industries across the world to treat wastewater prior to its release to the ecosystem, and several new concepts and technologies are fast replacing the traditional methods. This article briefly reviews the recent advances and application of nanotechnology for wastewater treatment. Nanomaterials typically have high reactivity and a high degree of functionalization, large specific surface area, size-dependent properties etc., which makes them suitable for applications in wastewater treatment and for water purification. In this article, the application of various nanomaterials such as metal nanoparticles, metal oxides, carbon compounds, zeolite, filtration membranes, etc., in the field of wastewater treatment is discussed.

  20. Bruxism and prosthetic treatment: a critical review.

    Science.gov (United States)

    Johansson, Anders; Omar, Ridwaan; Carlsson, Gunnar E

    2011-07-01

    Based on the findings from available research on bruxism and prosthetic treatment published in the dental literature, an attempt was made to draw conclusions about the existence of a possible relationship between the two, and its clinical relevance. MEDLINE/PubMed searches were conducted using the terms 'bruxism' and 'prosthetic treatment', as well as combinations of these and related terms. The few studies judged to be relevant were critically reviewed, in addition to papers found during an additional manual search of reference lists within selected articles. Bruxism is a common parafunctional habit, occurring both during sleep and wakefulness. Usually it causes few serious effects, but can do so in some patients. The etiology is multifactorial. There is no known treatment to stop bruxism, including prosthetic treatment. The role of bruxism in the process of tooth wear is unclear, but it is not considered a major cause. As informed by the present critical review, the relationship between bruxism and prosthetic treatment is one that relates mainly to the effect of the former on the latter. Bruxism may be included among the risk factors, and is associated with increased mechanical and/or technical complications in prosthodontic rehabilitation, although it seems not to affect implant survival. When prosthetic intervention is indicated in a patient with bruxism, efforts should be made to reduce the effects of likely heavy occlusal loading on all the components that contribute to prosthetic structural integrity. Failure to do so may indicate earlier failure than is the norm. Copyright © 2011 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  1. Understanding Monitoring Technologies for Adults With Pain: Systematic Literature Review.

    Science.gov (United States)

    Rodríguez, Iyubanit; Herskovic, Valeria; Gerea, Carmen; Fuentes, Carolina; Rossel, Pedro O; Marques, Maíra; Campos, Mauricio

    2017-10-27

    Monitoring of patients may decrease treatment costs and improve quality of care. Pain is the most common health problem that people seek help for in hospitals. Therefore, monitoring patients with pain may have significant impact in improving treatment. Several studies have studied factors affecting pain; however, no previous study has reviewed the contextual information that a monitoring system may capture to characterize a patient's situation. The objective of this study was to conduct a systematic review to (1) determine what types of technologies have been used to monitor adults with pain, and (2) construct a model of the context information that may be used to implement apps and devices aimed at monitoring adults with pain. A literature search (2005-2015) was conducted in electronic databases pertaining to medical and computer science literature (PubMed, Science Direct, ACM Digital Library, and IEEE Xplore) using a defined search string. Article selection was done through a process of removing duplicates, analyzing title and abstract, and then reviewing the full text of the article. In the final analysis, 87 articles were included and 53 of them (61%) used technologies to collect contextual information. A total of 49 types of context information were found and a five-dimension (activity, identity, wellness, environment, physiological) model of context information to monitor adults with pain was proposed, expanding on a previous model. Most technological interfaces for pain monitoring were wearable, possibly because they can be used in more realistic contexts. Few studies focused on older adults, creating a relevant avenue of research on how to create devices for users that may have impaired cognitive skills or low digital literacy. The design of monitoring devices and interfaces for adults with pain must deal with the challenge of selecting relevant contextual information to understand the user's situation, and not overburdening or inconveniencing users with

  2. Mixed waste characterization, treatment, and disposal focus area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    This paper presents details about the technology development programs of the Department of Energy. In this document, waste characterization, thermal treatment processes, non-thermal treatment processes, effluent monitors and controls, development of on-site innovative technologies, and DOE business opportunities are applied to environmental restoration. The focus areas for research are: contaminant plume containment and remediation; mixed waste characterization, treatment, and disposal; high-level waste tank remediation; landfill stabilization; and decontamination and decommissioning

  3. Mixed waste characterization, treatment, and disposal focus area. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This paper presents details about the technology development programs of the Department of Energy. In this document, waste characterization, thermal treatment processes, non-thermal treatment processes, effluent monitors and controls, development of on-site innovative technologies, and DOE business opportunities are applied to environmental restoration. The focus areas for research are: contaminant plume containment and remediation; mixed waste characterization, treatment, and disposal; high-level waste tank remediation; landfill stabilization; and decontamination and decommissioning.

  4. Science and Technology Review, December 1997

    Energy Technology Data Exchange (ETDEWEB)

    Upadhye, R.

    1997-12-01

    Featured articles in this issue cover progress in these areas: Advancing Technologies and Applications in Nondestructive Evaluation; Atomic Engineering with Multilayers; Marrying Astrophysics with the Earth; Continuing Work in Breast Cancer Detection Technologies. Furthermore, this issue lists patents issued to and/or the awards received by Laboratory employees. It also includes an index of the contents of all the issues published in calendar year 1997.

  5. Systemic combination treatment for psoriasis: a review

    DEFF Research Database (Denmark)

    Jensen, Peter; Skov, Lone; Zachariae, Claus

    2010-01-01

    Psoriasis is a chronic inflammatory skin disease, which affects approximately 2.6% of the population in Northern Europe and Scandinavia. In order to achieve disease control, combinations of systemic treatments are sometimes needed for variable time periods. However, no evidence-based guidelines...... exist for the use of systemic combination therapy. Therefore, our aim was to review the current literature on systemic anti-psoriatic combination regimens. We searched PubMed and identified 98 papers describing 116 studies (23 randomized) reporting on the effect of various systemic combination...

  6. Socioeconomic constraints on the technological choices in rural sewage treatment.

    Science.gov (United States)

    Gu, Baojing; Fan, Liangcong; Ying, Zechun; Xu, Qingshan; Luo, Weidong; Ge, Ying; Scott, Steffanie; Chang, Jie

    2016-10-01

    Technological innovation is one of the potential engines to mitigate environmental pollution. However, the implementation of new technologies sometimes fails owing to socioeconomic constraints from different stakeholders. Thus, it is essential to analyze constraints of environmental technologies in order to build a pathway for their implementation. In this study, taking three technologies on rural sewage treatment in Hangzhou, China as a case study, i.e., wastewater treatment plant (WTP), constructed wetland (CW), and biogas system, we analyzed how socioeconomic constraints affect the technological choices. Results showed that socioeconomic constraints play a key role through changing the relative opportunity cost of inputs from government as compared to that of residents to deliver the public good-sewage treatment-under different economic levels. Economic level determines the technological choice, and the preferred sewage treatment technologies change from biogas system to CW and further to WTP along with the increase of economic level. Mismatch of technological choice and economic level results in failures of rural sewage treatment, e.g., the CW only work well in moderately developed regions in Hangzhou. This finding expands the environmental Kuznets law by introducing the coproduction theory into analysis (i.e., inputs from both government and residents are essential for the delivery of public goods and services such as good environmental quality). A match between technology and socioeconomic conditions is essential to the environmental governance.

  7. Granuloma Faciale Treatment: A Systematic Review

    Directory of Open Access Journals (Sweden)

    Claudia Lindhaus

    2017-10-01

    Full Text Available Granuloma faciale is an uncommon benign chronic dermatosis characterized by reddish-brown to violaceous asymptomatic plaques appearing predominantly on the face. The pathogenesis of granuloma faciale remains unclear, and it is frequently unresponsive to therapy. This systematic review aims to summarize all recent publications on the management of granuloma faciale. The publications are mainly individual case reports, small case series and a few retrospective studies. Treatment options included topical, intralesional and systemic corticosteroids, topical pimecrolimus and tacrolimus, topical and systemic dapsone, systemic hydroxychloroquine, clofazimine, and tumour necrosis factor-alpha inhibitors. More invasive therapies using lasers as well as cryosurgery and surgery were also reported. Topical glucocorticosteroids and tacrolimus remain treatments of first choice, possibly supplemented by topical dapsone.

  8. Treatment of pulmonary brucellosis: a systematic review.

    Science.gov (United States)

    Solera, Javier; Solís García Del Pozo, Julián

    2017-01-01

    Pulmonary involvement is a rare, focal complication of human brucellosis. The aim of this review is to describe clinical and radiologic features, treatment administered and clinical course of these patients. Areas covered: We conducted a systematic search of scientific reports of brucellosis with pulmonary involvement published from January 1985 to July 2016. Four main patterns of disease were observed: pneumonia, pleural effusion, nodules and interstitial pattern. Cough and fever were the most common symptoms. Brucella spp. culture was obtained from blood (50%) or pleural fluid. Treatment is based on the same antibiotics and combinations of antibiotics as for patients with acute no complicated brucellosis. The most frequent antimicrobial combination was doxycycline and rifampin for six weeks. The clinical course was favorable in most reports, and mortality was remarkably low (Brucellosis from other pulmonary infections, such as tuberculosis, sometimes posed an added diagnostic challenge.

  9. [Ecological security of wastewater treatment processes: a review].

    Science.gov (United States)

    Yang, Sai; Hua, Tao

    2013-05-01

    Though the regular indicators of wastewater after treatment can meet the discharge requirements and reuse standards, it doesn't mean the effluent is harmless. From the sustainable point of view, to ensure the ecological and human security, comprehensive toxicity should be considered when discharge standards are set up. In order to improve the ecological security of wastewater treatment processes, toxicity reduction should be considered when selecting and optimizing the treatment processes. This paper reviewed the researches on the ecological security of wastewater treatment processes, with the focus on the purposes of various treatment processes, including the processes for special wastewater treatment, wastewater reuse, and for the safety of receiving waters. Conventional biological treatment combined with advanced oxidation technologies can enhance the toxicity reduction on the base of pollutants removal, which is worthy of further study. For the process aimed at wastewater reuse, the integration of different process units can complement the advantages of both conventional pollutants removal and toxicity reduction. For the process aimed at ecological security of receiving waters, the emphasis should be put on the toxicity reduction optimization of process parameters and process unit selection. Some suggestions for the problems in the current research and future research directions were put forward.

  10. Sodium-Bearing Waste Treatment, Applied Technology Plan

    International Nuclear Information System (INIS)

    Lance Lauerhass; Vince C. Maio; S. Kenneth Merrill; Arlin L. Olson; Keith J. Perry

    2003-01-01

    Settlement Agreement between the Department of Energy and the State of Idaho mandates treatment of sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center within the Idaho National Engineering and Environmental Laboratory. One of the requirements of the Settlement Agreement is to complete treatment of sodium-bearing waste by December 31, 2012. Applied technology activities are required to provide the data necessary to complete conceptual design of four identified alternative processes and to select the preferred alternative. To provide a technically defensible path forward for the selection of a treatment process and for the collection of needed data, an applied technology plan is required. This document presents that plan, identifying key elements of the decision process and the steps necessary to obtain the required data in support of both the decision and the conceptual design. The Sodium-Bearing Waste Treatment Applied Technology Plan has been prepared to provide a description/roadmap of the treatment alternative selection process. The plan details the results of risk analyzes and the resulting prioritized uncertainties. It presents a high-level flow diagram governing the technology decision process, as well as detailed roadmaps for each technology. The roadmaps describe the technical steps necessary in obtaining data to quantify and reduce the technical uncertainties associated with each alternative treatment process. This plan also describes the final products that will be delivered to the Department of Energy Idaho Operations Office in support of the office's selection of the final treatment technology

  11. Sodium-Bearing Waste Treatment, Applied Technology Plan

    Energy Technology Data Exchange (ETDEWEB)

    Lance Lauerhass; Vince C. Maio; S. Kenneth Merrill; Arlin L. Olson; Keith J. Perry

    2003-06-01

    Settlement Agreement between the Department of Energy and the State of Idaho mandates treatment of sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center within the Idaho National Engineering and Environmental Laboratory. One of the requirements of the Settlement Agreement is to complete treatment of sodium-bearing waste by December 31, 2012. Applied technology activities are required to provide the data necessary to complete conceptual design of four identified alternative processes and to select the preferred alternative. To provide a technically defensible path forward for the selection of a treatment process and for the collection of needed data, an applied technology plan is required. This document presents that plan, identifying key elements of the decision process and the steps necessary to obtain the required data in support of both the decision and the conceptual design. The Sodium-Bearing Waste Treatment Applied Technology Plan has been prepared to provide a description/roadmap of the treatment alternative selection process. The plan details the results of risk analyzes and the resulting prioritized uncertainties. It presents a high-level flow diagram governing the technology decision process, as well as detailed roadmaps for each technology. The roadmaps describe the technical steps necessary in obtaining data to quantify and reduce the technical uncertainties associated with each alternative treatment process. This plan also describes the final products that will be delivered to the Department of Energy Idaho Operations Office in support of the office's selection of the final treatment technology.

  12. 2017 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-10-31

    The 2017 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 5-9, 2017, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 263 individual activities were reviewed for VTO by 191 reviewers. Exactly 1,241 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  13. 2016 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-12-01

    The 2016 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 6-9, 2016, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 226 individual activities were reviewed for VTO, by 171 reviewers. A total of 1,044 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  14. Science and Technology Peer Review: GPRA

    National Research Council Canada - National Science Library

    Kostoff, Ronald

    2003-01-01

    This report describes practical issues for federal agencies to consider if they choose program peer review for internal purposes and/ or to contribute to satisfying the requirements of the Government...

  15. Silicon technologies ion implantation and thermal treatment

    CERN Document Server

    Baudrant, Annie

    2013-01-01

    The main purpose of this book is to remind new engineers in silicon foundry, the fundamental physical and chemical rules in major Front end treatments: oxidation, epitaxy, ion implantation and impurities diffusion.

  16. Review of automated vehicle technology : policy and implementation implications.

    Science.gov (United States)

    2016-03-14

    The goals of this project were to undergo a systematic review of automated vehicle technologies with a focus on policy : implications, methods of implementation, regulation by states, and developments occurring on legal fronts, ultimately creating a ...

  17. The radiofrequency frontier: a review of radiofrequency and combined radiofrequency pulsed-light technology in aesthetic medicine.

    Science.gov (United States)

    Sadick, Neil; Sorhaindo, Lian

    2005-05-01

    Radiofrequency (RF) and combined RF light source technologies have established themselves as safe and effective treatment modalities for several dermatologic procedures, including skin tightening, hair and leg vein removal, acne scarring, skin rejuvenation, and wrinkle reduction. This article reviews the technology, clinical applications, and recent advances of RF and combined RF light/laser source technologies in aesthetic medicine.

  18. Review on Li-Fi Technology

    Science.gov (United States)

    Chaudhuri, Rajarshi Roy; Dutta, Kaustav; Saha, Archisman

    With advent of various communication technologies one can access the whole world at one go. The impact of internet on our day to day life has been so extensive that it is impossible to think of a day without it. It has become a fundamental requirement in our daily lives. Survey reports show that nearly 46 % of homes throughout the world have access to the internet. And the percentage is growing each day. With such a high demand there has been a looming Radio Frequency spectrum crisis, which paved the way of the invention of a new technology:-LI-FI. LI-FI, acronym of light fidelity, is a new wireless technology which has the ability to provide high speed internet connection within localized environment. Till today we are familiar with WI-FI which uses radio spectrum for communication. Even though it gives a speed of nearly 150 Mbps (as per IEEE802.11n), it isn't sufficient to satisfy all users. On the other hand LI-FI uses spectrum which comprises a wide range of frequencies, from the infrared through visible, down to the ultraviolet spectrum for communication which has the ability to produce a theoretical speed of 10 Gbps. It is not only confined to light-emitting diode (LED) or laser technology or to any specific receiving technique, LI-FI is a framework for all those technologies which provides new ways to all present as well as future services or applications.

  19. Ethical challenges with welfare technology: a review of the literature.

    Science.gov (United States)

    Hofmann, Bjørn

    2013-06-01

    Demographical changes in high income counties will increase the need of health care services but reduce the number of people to provide them. Welfare technology is launched as an important measure to meet this challenge. As with all types of technologies we must explore its ethical challenges. A literature review reveals that welfare technology is a generic term for a heterogeneous group of technologies and there are few studies documenting their efficacy, effectiveness and efficiency. Many kinds of welfare technology break with the traditional organization of health care. It introduces technology in new areas, such as in private homes, and it provides new functions, e.g. offering social stimuli and entertainment. At the same time welfare technology is developed for groups that traditionally have not been extensive technology users. This raises a series of ethical questions with regard to the development and use of welfare technologies, which are presented in this review. The main challenges identified are: (1) Alienation when advanced technology is used at home, (2) conflicting goals, as welfare technologies have many stakeholders with several ends, (3) respecting confidentiality and privacy when third-party actors are involved, (4) guaranteeing equal access and just distribution, and (5) handling conflicts between instrumental rationality and care in terms of respecting dignity and vulnerability. Addressing these issues is important for developing and implementing welfare technologies in a morally acceptable manner.

  20. Monitoring of structures: review of technologies

    International Nuclear Information System (INIS)

    2013-01-01

    Structural Health Monitoring (SHM) aims at monitoring the integrity of structures either in a continuous way or periodically. SHM is used for the monitoring of big civil works like bridges, dams, railways or critical structures like nuclear power plants or chemical plants. The sensors fixed on the structure allow an in-service monitoring. SHM gathers various technologies like ultrasound, acoustic emission, vibrations, Foucault currents...A technology based on guided ultrasonic waves (Lamb waves) appears promising for monitoring large structures made of composite materials. Another technology based on optical fibers can be used in very harsh environment and the optic fiber does not require any more sensors, the optical fiber itself being the sensor. The optical fiber is generally integrated to the structure during the construction phase. (A.C.)

  1. The paradox of imaging technology: A review of the literature

    International Nuclear Information System (INIS)

    Murphy, F.J.

    2006-01-01

    Purpose: The purpose of this study was to review the social scientific literature associated with medical imaging technology. Methods: An extensive search of published studies in nursing, psychology and anthropology was undertaken to support the radiography specific literature. Results: Following a broad definition of technology and its profound influence on society, an analysis of imaging literature revealed a complex relationship between technology and human interactions. Examples are cited for CT, MRI and ultrasound. Conclusion: It is suggested that any attempt to understand imaging technology must place at its centre the perspectives of patients and radiographers. Scientific descriptors must be balanced with equal deliberation given to 'soft technology'

  2. Lab on a chip technologies for algae detection : a review

    NARCIS (Netherlands)

    Schaap, A.M.; Rohrlack, T.; Bellouard, Y.J.

    2012-01-01

    Over the last few decades, lab on a chip technologies have emerged as powerful tools for high-accuracy diagnosis with minute quantities of liquid and as tools for exploring cell properties in general. In this paper, we present a review of the current status of this technology in the context of algae

  3. Periodontal health during clear aligners treatment: a systematic review.

    Science.gov (United States)

    Rossini, Gabriele; Parrini, Simone; Castroflorio, Tommaso; Deregibus, Andrea; Debernardi, Cesare L

    2015-10-01

    Clear aligner treatment (CAT) has been cited as a safe and comfortable orthodontic procedure for adult patients. However, the available evidence is scarce. To perform a systematic review of the existing literature in order to assess periodontal health during CAT. Pubmed, Pubmed Central, National Library of Medicine's Medline, Embase, Cochrane Central Register of Controlled Clinical trials, Web of Knowledge, Scopus, Google Scholar, and LILACS were searched from January 1945 to September 2014 to identify all peer-reviewed papers potentially relevant to the review. After duplicate selection and extraction procedures, the risk of bias was assessed according to the Centre for Reviews and Dissemination criteria, and a 3-point grading system, as described by the Swedish Council on Technology Assessment in Health Care (SBU), was used to rate the methodological quality of the selected papers. A PICOS table was used for data extraction. Five relevant articles were selected from the 1247 identified articles. The level of evidence was moderate for all the studies. A significant improvement of the periodontal health indexes was revealed, in particular when CAT was compared to fixed appliances. No periodontal CAT adverse effects were observed in the selected studies. Periodontal health indexes were significantly improved during CAT. The results of this review should be interpreted with some caution because of the number, quality, and heterogeneity of the included studies. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  4. Review of Trenchless Technologies' Successes and their ...

    African Journals Online (AJOL)

    ... costly construction modifications, and use of substandard borrow material, environmental damage to the site, post construction remedial work, and even failure of a structure and subsequent litigation. Trenchless technology can be defined as the use of construction methods to install and repair underground infrastructure ...

  5. Advance in Bioaerosol Removal Technologies; A Review

    Directory of Open Access Journals (Sweden)

    Ahmad Jonidi Jafari

    2018-03-01

    Full Text Available Bioaerosols are air pollutants that affect human health in various routes. They are characteristically diverse; such as bacteria, viruses and fungi, that everyone has different characteristics and effects, various solutions and technologies are studied or applied for their removal and inactivation. Regarding to lack of specific and integrated publications about the different air quality guidelines for bioaerosols and the methods and technologies, attending to approach the standards, purpose of this study was set on the development of the issue. The importance of presence of bioaerosols in breathing air and related standards and guidelines, also controlling technologies such as filtration, ultraviolet (UV radiation, photo catalyst, temperature and electrostatic precipitators were surveyed in this study by using the scientific literature.Given the results, UV irradiation and photocatalytic methods are ineffective for allergens. In this way, filtration is unable for inactivation of the bioaerosols, then there is the threat that they can aerosolize again. Hence, these technologies individually cannot provide the air quality standards which have established for sensitive conditions such as operation rooms. Regarding the discussions, application of the methods that include collection and inactivation of the bioaerosols simultaneously, such as electrostatic precipitators, could be more effective in the likewise environments.

  6. Wearable technology for spine movement assessment: A systematic review

    OpenAIRE

    Papi, Enrica; Koh, Woon Senn; McGregor, Alison H.

    2017-01-01

    Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies t...

  7. Science and technology review, May 1997

    Energy Technology Data Exchange (ETDEWEB)

    Upadhye, R.

    1997-05-01

    This month`s issue contains articles entitled PEREGRINE: Improving Radiation Treatment for Cancer; The Unitized Regenerative Fuel Cell; Better Flash Radiography Using the FXR; and Nuclear Weapons, Information Project.

  8. Advances in surface treatments: Technology, applications, effects

    International Nuclear Information System (INIS)

    Niku-Lari, A.

    1987-01-01

    An international handbook has been produced to include all aspects of residual stresses, including the theoretical background, effects of residual stresses, measurement and calculation and quantitative assessment of residual stress effects. Techniques for altering residual stresses, particularly surface treatments, are discussed. Up to date information on the state of the art is presented. (UK)

  9. Advanced oxidation technologies : photocatalytic treatment of wastewater

    NARCIS (Netherlands)

    Chen, J.

    1997-01-01

    7.1. Summary and conclusions

    The last two decennia have shown a growing interest in the photocatalytic treatment of wastewater, and more and more research has been carried out into the various aspects of photocatalysis, varying from highly fundamental aspects to practical application.

  10. 2009 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-10-01

    Annual Merit Review and Peer Evaluation Meeting to review the FY2008 accomplishments and FY2009 plans for the Vehicle Technologies Program, and provide an opportunity for industry, government, and academic to give inputs to DOE on the Program with a structured and formal methodology.

  11. Modification of Wastewater Treatment Technology at Cottonseed Oil Plant

    Directory of Open Access Journals (Sweden)

    Alshabab Mary Shick

    2016-01-01

    Full Text Available Wastewaters from cottonseed oil producing plant in Syria were studied in laboratory experiments. Aim of the study was to suggest modification of wastewater treatment technology in order to increase its efficiency. Concentration of pollutants in wastewaters was controlled by measurement of COD. According to the results of experiments it was suggested to decrease significantly (8-20 times dosages of reagents (acidifier, coagulant, flocculant in several actual stages of treatment (acidification, separation, coagulation and sedimentation and add stage of dispersed air flotation before coagulation treatment. The modified wastewater treatment technology would reduce COD to the values allowed for irrigation waters by Syrian National Standard.

  12. Cervical Precancer Treatment in Low- and Middle-Income Countries: A Technology Overview

    Directory of Open Access Journals (Sweden)

    Mauricio Maza

    2017-08-01

    Full Text Available Cervical cancer is the fourth leading cause of cancer-related death in women worldwide, with 90% of cases occurring in low- and middle-income countries (LMICs. There has been a global effort to increase access to affordable screening in these settings; however, a corresponding increase in availability of effective and inexpensive treatment modalities for ablating or excising precancerous lesions is also needed to decrease mortality. This article reviews the current landscape of available and developing technologies for treatment of cervical precancer in LMICs. At present, the standard treatment of most precancerous lesions in LMICs is gas-based cryotherapy. This low-cost, effective technology is an expedient treatment in many areas; however, obtaining and transporting gas is often difficult, and unwieldy gas tanks are not conducive to mobile health campaigns. There are several promising ablative technologies in development that are gasless or require less gas than conventional cryotherapy. Although further evaluation of the efficacy and cost-effectiveness is needed, several of these technologies are safe and can now be implemented in LMICs. Nonsurgical therapies, such as therapeutic vaccines, antivirals, and topical applications, are also promising, but most remain in early-stage trials. The establishment of evidence-based standardized protocols for available treatments and the development and introduction of novel technologies are necessary steps in overcoming barriers to treatment in LMICs and decreasing the global burden of cervical cancer. Guidance from WHO on emerging treatment technologies is also needed.

  13. Influence of technological treatments on bacterial communities in ...

    African Journals Online (AJOL)

    Influence of technological treatments on bacterial communities in tilapia ( Oreochromis niloticus ) as determined by 16S rDNA fingerprinting using polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE)

  14. Making medical treatments resilient to technological disruptions in telemedicine systems

    NARCIS (Netherlands)

    Larburu Rubio, Nekane; Widya, I.A.; Bults, Richard G.A.; Hermens, Hermanus J.

    Telemedicine depends on Information and Communication Technology (ICT) to support remote treatment of patients. This dependency requires the telemedicine system design to be resilient for ICT performance degradation or subsystem failures. Nevertheless, using telemedicine systems create a dependency

  15. Golimumab for the treatment of ankylosing spondylitis : a NICE single technology appraisal

    NARCIS (Netherlands)

    Armstrong, Nigel; Joore, Manuela; van Asselt, Thea; Misso, Kate; Manning, Nathan; Tomini, Florian; Kleijnen, Jos; Riemsma, Rob

    As part of the National Institute for Health and Clinical Excellence (NICE) single technology appraisal (STA) process, the Evidence Review Group (ERG) produced a report to comment on the clinical and cost effectiveness of golimumab (Simponi(®), Merck Sharp & Dohme) for the treatment of ankylosing

  16. High intensity focused ultrasound treatment of small renal masses: Clinical effectiveness and technological advances

    Science.gov (United States)

    Nabi, G.; Goodman, C.; Melzer, A.

    2010-01-01

    The review summarises the technological advances in the application of high-intensity focused ultrasound for small renal masses presumed to be cancer including the systematic review of its clinical application. Current progress in the area of magnetic resonance image guided ultrasound ablation is also appraised. Specifically, organ tracking and real time monitoring of temperature changes during the treatment are discussed. Finally, areas of future research interest are outlined. PMID:21116349

  17. High intensity focused ultrasound treatment of small renal masses: Clinical effectiveness and technological advances

    OpenAIRE

    Nabi, G.; Goodman, C.; Melzer, A.

    2010-01-01

    The review summarises the technological advances in the application of high-intensity focused ultrasound for small renal masses presumed to be cancer including the systematic review of its clinical application. Current progress in the area of magnetic resonance image guided ultrasound ablation is also appraised. Specifically, organ tracking and real time monitoring of temperature changes during the treatment are discussed. Finally, areas of future research interest are outlined.

  18. Energy positive domestic wastewater treatment: the roles of anaerobic and phototrophic technologies

    KAUST Repository

    Shoener, B. D.

    2014-01-01

    The negative energy balance of wastewater treatment could be reversed if anaerobic technologies were implemented for organic carbon oxidation and phototrophic technologies were utilized for nutrient recovery. To characterize the potential for energy positive wastewater treatment by anaerobic and phototrophic biotechnologies we performed a comprehensive literature review and analysis, focusing on energy production (as kJ per capita per day and as kJ m-3 of wastewater treated), energy consumption, and treatment efficacy. Anaerobic technologies included in this review were the anaerobic baffled reactor (ABR), anaerobic membrane bioreactor (AnMBR), anaerobic fluidized bed reactor (AFB), upflow anaerobic sludge blanket (UASB), anaerobic sequencing batch reactor (ASBR), microbial electrolysis cell (MEC), and microbial fuel cell (MFC). Phototrophic technologies included were the high rate algal pond (HRAP), photobioreactor (PBR), stirred tank reactor, waste stabilization pond (WSP), and algal turf scrubber (ATS). Average energy recovery efficiencies for anaerobic technologies ranged from 1.6% (MFC) to 47.5% (ABR). When including typical percent chemical oxygen demand (COD) removals by each technology, this range would equate to roughly 40-1200 kJ per capita per day or 110-3300 kJ m-3 of treated wastewater. The average bioenergy feedstock production by phototrophic technologies ranged from 1200-4700 kJ per capita per day or 3400-13000 kJ m-3 (exceeding anaerobic technologies and, at times, the energetic content of the influent organic carbon), with usable energy production dependent upon downstream conversion to fuels. Energy consumption analysis showed that energy positive anaerobic wastewater treatment by emerging technologies would require significant reductions of parasitic losses from mechanical mixing and gas sparging. Technology targets and critical barriers for energy-producing technologies are identified, and the role of integrated anaerobic and phototrophic

  19. Energy positive domestic wastewater treatment: the roles of anaerobic and phototrophic technologies.

    Science.gov (United States)

    Shoener, B D; Bradley, I M; Cusick, R D; Guest, J S

    2014-05-01

    The negative energy balance of wastewater treatment could be reversed if anaerobic technologies were implemented for organic carbon oxidation and phototrophic technologies were utilized for nutrient recovery. To characterize the potential for energy positive wastewater treatment by anaerobic and phototrophic biotechnologies we performed a comprehensive literature review and analysis, focusing on energy production (as kJ per capita per day and as kJ m(-3) of wastewater treated), energy consumption, and treatment efficacy. Anaerobic technologies included in this review were the anaerobic baffled reactor (ABR), anaerobic membrane bioreactor (AnMBR), anaerobic fluidized bed reactor (AFB), upflow anaerobic sludge blanket (UASB), anaerobic sequencing batch reactor (ASBR), microbial electrolysis cell (MEC), and microbial fuel cell (MFC). Phototrophic technologies included were the high rate algal pond (HRAP), photobioreactor (PBR), stirred tank reactor, waste stabilization pond (WSP), and algal turf scrubber (ATS). Average energy recovery efficiencies for anaerobic technologies ranged from 1.6% (MFC) to 47.5% (ABR). When including typical percent chemical oxygen demand (COD) removals by each technology, this range would equate to roughly 40-1200 kJ per capita per day or 110-3300 kJ m(-3) of treated wastewater. The average bioenergy feedstock production by phototrophic technologies ranged from 1200-4700 kJ per capita per day or 3400-13 000 kJ m(-3) (exceeding anaerobic technologies and, at times, the energetic content of the influent organic carbon), with usable energy production dependent upon downstream conversion to fuels. Energy consumption analysis showed that energy positive anaerobic wastewater treatment by emerging technologies would require significant reductions of parasitic losses from mechanical mixing and gas sparging. Technology targets and critical barriers for energy-producing technologies are identified, and the role of integrated anaerobic and

  20. Advanced Technologies and Treatments for Diabetes 2018.

    Science.gov (United States)

    Carracher, Ann M; Marathe, Payal H; Close, Kelly L

    2018-03-23

    Ann M. Carracher, Payal H. Marathe, and Kelly L. Close are of Close Concerns (http://www.closeconcerns.com), a healthcare information company focused exclusively on diabetes and obesity care. Close Concerns publishes Closer Look, a periodical that brings together news and insights in these areas. Each month, the Journal of Diabetes includes this News feature, in which Carracher, Marathe, and Close review the latest developments relevant to researchers and clinicians. © 2018 Ruijin Hospital, Shanghai Jiaotong University School of Medicine and John Wiley & Sons Australia, Ltd.

  1. Modern breast cancer detection: a technological review.

    Science.gov (United States)

    Nover, Adam B; Jagtap, Shami; Anjum, Waqas; Yegingil, Hakki; Shih, Wan Y; Shih, Wei-Heng; Brooks, Ari D

    2009-01-01

    Breast cancer is a serious threat worldwide and is the number two killer of women in the United States. The key to successful management is screening and early detection. What follows is a description of the state of the art in screening and detection for breast cancer as well as a discussion of new and emerging technologies. This paper aims to serve as a starting point for those who are not acquainted with this growing field.

  2. Energy and technology review, March 1995

    International Nuclear Information System (INIS)

    Bookless, W.A.; Wheatcraft, D.

    1995-03-01

    This journal contains two feature articles. The first article reports on the background, design, and capabilities of the Portable Tritium Processing System currently being used to clean up and decontaminate the Laboratory's Tritium Facility. The second article discusses the development of a x-ray lasers as a probe to obtain high-resolution images of high-density plasmas produced at the Nova laser facility. Finally, two research programs are highlighted. They are silicon microcomponents and modern technology for advanced military training

  3. Advanced oxidation technologies : photocatalytic treatment of wastewater

    OpenAIRE

    Chen, J.

    1997-01-01

    7.1. Summary and conclusions

    The last two decennia have shown a growing interest in the photocatalytic treatment of wastewater, and more and more research has been carried out into the various aspects of photocatalysis, varying from highly fundamental aspects to practical application. However, despite all this research, there is still much to investigate. Suggested photocatalytic mechanisms, such as those for oxidation by hydroxyl radicals and for oxidation at the surface of photocata...

  4. Legal aspects of auxillary reproductive technologies in infertility treatment

    Directory of Open Access Journals (Sweden)

    V.Yu. Albitskiy

    2011-01-01

    Full Text Available The article presents several aspects of legal regulation of auxillary reproductive technologies in treatment of infertility in Russia and other countries.Key words: auxillary reproductive technologies, method of extracorporeal fertilization, newborn, premature newborn, multiple pregnancy, embryo, infertility, law.

  5. Wastes to Resources: Appropriate Technologies for Sewage Treatment and Conversion.

    Science.gov (United States)

    Anderson, Stephen P.

    Appropriate technology options for sewage management systems are explained in this four-chapter report. The use of appropriate technologies is advocated for its health, environmental, and economic benefits. Chapter 1 presents background information on sewage treatment in the United States and the key issues facing municipal sewage managers.…

  6. Multisensory Technology for Flavor Augmentation: A Mini Review.

    Science.gov (United States)

    Velasco, Carlos; Obrist, Marianna; Petit, Olivia; Spence, Charles

    2018-01-01

    There is growing interest in the development of new technologies that capitalize on our emerging understanding of the multisensory influences on flavor perception in order to enhance human-food interaction design. This review focuses on the role of (extrinsic) visual, auditory, and haptic/tactile elements in modulating flavor perception and more generally, our food and drink experiences. We review some of the most exciting examples of recent multisensory technologies for augmenting such experiences. Here, we discuss applications for these technologies, for example, in the field of food experience design, in the support of healthy eating, and in the rapidly growing world of sensory marketing. However, as the review makes clear, while there are many opportunities for novel human-food interaction design, there are also a number of challenges that will need to be tackled before new technologies can be meaningfully integrated into our everyday food and drink experiences.

  7. Multisensory Technology for Flavor Augmentation: A Mini Review

    Directory of Open Access Journals (Sweden)

    Carlos Velasco

    2018-01-01

    Full Text Available There is growing interest in the development of new technologies that capitalize on our emerging understanding of the multisensory influences on flavor perception in order to enhance human–food interaction design. This review focuses on the role of (extrinsic visual, auditory, and haptic/tactile elements in modulating flavor perception and more generally, our food and drink experiences. We review some of the most exciting examples of recent multisensory technologies for augmenting such experiences. Here, we discuss applications for these technologies, for example, in the field of food experience design, in the support of healthy eating, and in the rapidly growing world of sensory marketing. However, as the review makes clear, while there are many opportunities for novel human–food interaction design, there are also a number of challenges that will need to be tackled before new technologies can be meaningfully integrated into our everyday food and drink experiences.

  8. Proceedings of the fuels technology contractors review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Malone, R.D. [ed.

    1993-11-01

    The Fuels Technology Contractors Review Meeting was held November 16-18, 1993, at the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. This meeting was sponsored and hosted by METC, the Office of Fossil Energy, U.S. Department of Energy (DOE). METC periodically provides an opportunity to bring together all of the R&D participants in a DOE-sponsored contractors review meeting to present key results of their research and to provide technology transfer to the active research community and to the interested public. This meeting was previously called the Natural Gas Technology Contractors Review Meeting. This year it was expanded to include DOE-sponsored research on oil shale and tar sands and so was retitled the Fuels Technology Contractors Review Meeting. Current research activities include efforts in both natural gas and liquid fuels. The natural gas portion of the meeting included discussions of results summarizing work being conducted in fracture systems, both natural and induced; drilling, completion, and stimulation research; resource characterization; delivery and storage; gas to liquids research; and environmental issues. The meeting also included project and technology summaries on research in oil shale, tar sands, and mild coal gasification, and summaries of work in natural-gas fuel cells and natural-gas turbines. The format included oral and poster session presentations. Individual papers have been processed separately for inclusion in the Energy Science and Technology database.

  9. Science and Technology Review October 1999

    International Nuclear Information System (INIS)

    Eimerl, D.

    1999-01-01

    The following titles are in the review: The Laboratory in the News; Commentary about the year's R and D 100 Honors; The Optical Modulator and Switch: Light on the Move; From Dinosaur Bones to Software, Gamma Rays Protect Property; High-Power Green Lasers Open up Precision Machining; Breakthrough Design for Accelerators; New Deposition System for the Microchip Revolution; and PEREGRINEtrademark Takes Aim at Cancer Tumors

  10. Future Research in Health Information Technology: A Review.

    Science.gov (United States)

    Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammad Reza; Saghafi, Fatemeh

    2017-01-01

    Currently, information technology is considered an important tool to improve healthcare services. To adopt the right technologies, policy makers should have adequate information about present and future advances. This study aimed to review and compare studies with a focus on the future of health information technology. This review study was completed in 2015. The databases used were Scopus, Web of Science, ProQuest, Ovid Medline, and PubMed. Keyword searches were used to identify papers and materials published between 2000 and 2015. Initially, 407 papers were obtained, and they were reduced to 11 papers at the final stage. The selected papers were described and compared in terms of the country of origin, objective, methodology, and time horizon. The papers were divided into two groups: those forecasting the future of health information technology (seven papers) and those providing health information technology foresight (four papers). The results showed that papers related to forecasting the future of health information technology were mostly a literature review, and the time horizon was up to 10 years in most of these studies. In the health information technology foresight group, most of the studies used a combination of techniques, such as scenario building and Delphi methods, and had long-term objectives. To make the most of an investment and to improve planning and successful implementation of health information technology, a strategic plan for the future needs to be set. To achieve this aim, methods such as forecasting the future of health information technology and offering health information technology foresight can be applied. The forecasting method is used when the objectives are not very large, and the foresight approach is recommended when large-scale objectives are set to be achieved. In the field of health information technology, the results of foresight studies can help to establish realistic long-term expectations of the future of health information

  11. Impact of pre-treatment technologies on soil aquifer treatment

    Directory of Open Access Journals (Sweden)

    A. Besançon

    2017-03-01

    Full Text Available This study investigates the impact of pre-treatment options on the performances of soil columns simulating soil aquifer treatment (SAT. For this purpose a conventional activated sludge (CAS process, a membrane bioreactor (MBR and vertical flow reed beds were used as single units or in combination before SAT. The influent and effluent from each treatment train were monitored over three successive 6-month periods, corresponding to changes in the operational conditions of the MBR and CAS units from 6 days' sludge retention time (SRT to 12 and 20 days. All the columns acted as efficient polishing steps for solids and bacteria. The column receiving effluent from the CAS system running at 6 days' SRT also presented high total nitrogen and total phosphorus removals, but this column was also associated with the lowest infiltration rates over that period. While the quality of the effluent from the column following the CAS process increased over 18 months of operation, the effluent quality of the columns receiving MBR effluent degraded. No correlations were found between variations in SRT of the MBR and CAS processes and the columns' performances. Overall, all columns, except the one receiving CAS effluent, underwent a reduction in infiltration rate over 18 months.

  12. A Review of Energy Storage Technologies

    DEFF Research Database (Denmark)

    Connolly, David

    2010-01-01

    A brief examination into the energy storage techniques currently available for the integration of fluctuating renewable energy was carried out. These included Pumped Hydroelectric Energy Storage (PHES), Underground Pumped Hydroelectric Energy Storage (UPHES), Compressed Air Energy Storage (CAES...... than PHES depending on the availability of suitable sites. FBES could also be utilised in the future for the integration of wind, but it may not have the scale required to exist along with electric vehicles. The remaining technologies will most likely be used for their current applications...

  13. Dielectric and Insulating Technology 2004 : Review & Forecast

    Science.gov (United States)

    Okamoto, Tatsuki

    This article reports the state-of-art of DEIS activites. DEIS activiteis are basically based on the activites of 8-10 investigation committees’ under DEIS committee. Recent DEIS activites are categlized into three functions in this article and remarkable activity or trend of each category is mentioned. Those are activities on insulation diagnosis (AI application and asset management), activities on new insulation technology for power tansmission (high Tc super conducting cable insulation and all solid sinulated substation), and activities on new insulating materials (Nanocomposite).

  14. Dielectric and Insulating Technology 2005 : Reviews & Forecasts

    Science.gov (United States)

    Okamoto, Tatsuki

    This article reports the state-of-art of TC-DEI ( Technical Committee of Dielectrics and Electrical Insulation of IEEJ) activites. The activiteis are basically based on the activites of 8-10 investigation committees under TC-DEI. Recent activites were categorized into three functions in this article and remarkable activity or trend for each category is mentioned as was done in the article of 2003. Thoese are activities on asset management (AI application and insulation diagnosis), activities on new insulating and functional materials (Nano composite) and activities on new insulation technology for power tansmission (high Tc superconducting cable insulation).

  15. Dielectric and Insulating Technology 2006 : Review & Forecast

    Science.gov (United States)

    Okamoto, Tatsuki

    This article reports the state-of-art of TC-DEI ( Technical Committee of Dielectrics and Electrical Insulation of IEEJ) activites. The activiteis are basically based on the activites of 8-10 investigation committees under TC-DEI. Recent activites were categorized into three functions in this article and remarkable activity or trend for each category is mentioned as was seen in the articles of 2005. Those are activities on asset management (AI application and insulation diagnosis), activities on new insulating and functional materials (Nano composite) and activities on new insulation technology for power tansmission (high Tc superconducting cable insulation).

  16. Science and technology review, April 1996

    Energy Technology Data Exchange (ETDEWEB)

    Failor, B.; Stull, S. [eds.

    1996-04-01

    There are two main feature articles in this publication. The first article tells of how using off-the-shelf computers, state-of-the-art CCDs, and a network of collaborators, scientist at Lawrence Livermore National Lab explore the composition of dark matter. Indications are that MACHOs (MAssive Compact Halo Objects) make up the bulk of dark matter in the universe. The second article discusses a new breed of Livermore-developed, flywheel-based energy storage systems using new materials, new technologies, and new thinking to develop a new electromechanical battery. Patents and research highlights are also listed in this publication.

  17. 2016 National Algal Biofuels Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    Barry, Amanda [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bioenergy Technologies Office, Washington, DC (United States); Wolfe, Alexis [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States); English, Christine [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bioenergy Technologies Office, Washington, DC (United States); Ruddick, Colleen [BCS, Incorporated, Washington, DC (United States); Lambert, Devinn [Bioenergy Technologies Office, Washington, DC (United States)

    2016-06-01

    The Bioenergy Technologies Office (BETO) of the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, is committed to advancing the vision of a viable, sustainable domestic biomass industry that produces renewable biofuels, bioproducts, and biopower; enhances U.S. energy security; reduces our dependence on fossil fuels; provides environmental benefits; and creates economic opportunities across the nation. BETO’s goals are driven by various federal policies and laws, including the Energy Independence and Security Act of 2007 (EISA). To accomplish its goals, BETO has undertaken a diverse portfolio of research, development, and demonstration (RD&D) activities, in partnership with national laboratories, academia, and industry.

  18. Science and Technology Review May 2001

    International Nuclear Information System (INIS)

    Quong, A.A.

    2001-01-01

    This issue contains the following articles: (1) ''Advanced Technology for Stockpile Stewardship''. (2) ''Uncovering Hidden Defects with Neutrons''--High-energy neutrons can effectively image heavily shielded objects that are essentially opaque to x rays. (3) ''The Human in the Mouse Mirror'' Comparative genomics may help us to better understand our genetic heritage and evolution, or why humans are human and mice are mice. (4) ''The NIF Target Chamber--Ready for the Challenge'' Good progress is being made on the construction of the world's largest laser. (5) ''Indoor Testing Begins Soon at Site 300'' The world's largest explosives chamber nears completion

  19. Telemedicine and Pediatric Obesity Treatment: Review of the literature and lessons learned

    OpenAIRE

    Cohen, Gail M.; Irby, Megan B.; Boles, Katie; Jordan, Christine; Skelton, Joseph A.

    2012-01-01

    Pediatric obesity is more prevalent in rural areas, yet rural families may not have access to pediatric obesity treatment programs. Use of new technologies, particularly telemedicine, has proven effective in other behavioral fields, such as psychiatry. This paper reviews the literature on the use of telemedicine in pediatric obesity treatment, and describes one tertiary-care pediatric obesity telemedicine program. We performed a systematic review of the literature from 1990–2011 using the fol...

  20. Online Technologies for Health Information and Education: A literature review.

    Science.gov (United States)

    Gill, Harkiran K; Gill, Navkiranjit; Young, Sean D

    2013-04-01

    There is a growing body of research focused on the use of social media and Internet technologies for health education and information sharing. The authors reviewed literature on this topic, with a specific focus on the benefits and concerns associated with using online social technologies as health education and communication tools. Studies suggest that social media technologies have the potential to safely and effectively deliver health education, if privacy concerns are addressed. Utility of social media-based health education and communication will improve as technology developers and public health officials determine ways to improve information accuracy and address privacy concerns.

  1. Occupational Safety Review of High Technology Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee Cadwallader

    2005-01-31

    This report contains reviews of operating experiences, selected accident events, and industrial safety performance indicators that document the performance of the major US DOE magnetic fusion experiments and particle accelerators. These data are useful to form a basis for the occupational safety level at matured research facilities with known sets of safety rules and regulations. Some of the issues discussed are radiation safety, electromagnetic energy exposure events, and some of the more widespread issues of working at height, equipment fires, confined space work, electrical work, and other industrial hazards. Nuclear power plant industrial safety data are also included for comparison.

  2. Targeted treatments for cervical cancer: a review

    Directory of Open Access Journals (Sweden)

    Peralta-Zaragoza O

    2012-11-01

    Full Text Available Oscar Peralta-Zaragoza,1 Víctor Hugo Bermúdez-Morales,1 Carlos Pérez-Plasencia,2,3 Jonathan Salazar-León,1 Claudia Gómez-Cerón,1 Vicente Madrid-Marina11Direction of Chronic Infections and Cancer, Research Center in Infection Diseases, National Institute of Public Health, Cuernavaca, Morelos, México; 2Oncogenomics Laboratory, National Cancer Institute of Mexico, Tlalpan, México; 3Biomedicine Unit, FES-Iztacala UNAM, México City, MéxicoAbstract: Cervical cancer is the second most common cause of cancer death in women worldwide and the development of new diagnosis, prognostic, and treatment strategies merits special attention. Although surgery and chemoradiotherapy can cure 80%–95% of women with early stage cancer, the recurrent and metastatic disease remains a major cause of cancer death. Many efforts have been made to design new drugs and develop gene therapies to treat cervical cancer. In recent decades, research on treatment strategies has proposed several options, including the role of HPV E6 and E7 oncogenes, which are retained and expressed in most cervical cancers and whose respective oncoproteins are critical to the induction and maintenance of the malignant phenotype. Other efforts have been focused on antitumor immunotherapy strategies. It is known that during the development of cervical cancer, a cascade of abnormal events is induced, including disruption of cellular cycle control, perturbation of antitumor immune response, alteration of gene expression, and deregulation of microRNA expression. Thus, in this review article we discuss potential targets for the treatment of cervical cancer associated with HPV infection, with special attention to immunotherapy approaches, clinical trials, siRNA molecules, and their implications as gene therapy strategies against cervical cancer development.Keywords: Cervical cancer, clinical trials, gene therapy, HPV E6 and E7 oncogenes, siRNAs

  3. Disruptive technology in the treatment of thoracic trauma.

    Science.gov (United States)

    Smith, R Stephen

    2013-12-01

    The care of patients with thoracic injuries has undergone monumental change over the past 25 years. Advances in technology have driven improvements in care, with obvious benefits to patients. In many instances, new or "disruptive" technologies have unexpectedly displaced previously established standards for the diagnosis and treatment of these potentially devastating injuries. Examples of disruptive technology include the use of ultrasound technology for the diagnosis of cardiac tamponade and pneumothorax; thoracoscopic techniques instead of thoracotomy, pulmonary tractotomy, and stapled lung resection; endovascular repair of thoracic aortic injury; operative fixation of flail chest; and the enhanced availability of extracorporeal lung support for severe respiratory failure. Surgeons must be prepared to recognize the benefits, and limits, of novel technologies and incorporate these methods into day-to-day treatment protocols. Copyright © 2013 Elsevier Inc. All rights reserved.

  4. Risk assessments of innovative technologies for treatment of mixed waste

    International Nuclear Information System (INIS)

    Ragaini, R.C.; Aycock, M.T.; Russell, J.E.

    1993-01-01

    The mission of the US Department of Energy's (DOE'S) Mixed Waste Integrated Program (MWIP) is to develop complete and appropriate technologies for the treatment of DOE mixed low-level waste and transuranic wastes in order to ensure that all affected DOE installations and projects can come into compliance with environmental law and meet DOE's 30-yr cleanup and operational goals. The MWIP will achieve its goal by developing technologies that are in compliance with regulatory requirements, are socially and politically viable, and are cost beneficial and effective in disposed waste source term and volume reduction. The project management plan for MWIP requires that technologies be evaluated in accordance with criteria that rank technologies with regard to performance, risk, and cost-effectiveness. This paper addresses the methodology used to rank alternative mixed-water treatment technologies with regard to relative risk

  5. Science & Technology Review November/December 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2008-10-07

    This months issue has the following articles: (1) Innovation Is Key to Prosperity and Security --Commentary by Erik J. Stenehjem; (2) Taking Ultrafast Snapshots of Material Changes--The dynamic transmission electron microscope captures images a million times faster than conventional instruments; (3) Automated Technology for Laser Fusion Systems--The first completely computer-controlled system for aligning laser beams is helping make fusion research possible; (4) Protecting the Nation through Secure Cargo--A new device tracks and monitors cargo containers during transit to improve national security; (5) Atom by Atom, Layer by Layer--Extremely thin sandwiches of materials called nanolaminates exhibit remarkable, highly useful properties; and (6) Predicting the Bizarre Properties of Plutonium--A supercomputing 'grand challenge' team has made highly precise predictions of the behavior of plutonium's most important solid phase.

  6. Science & Technology Review January/February 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-11-30

    This month's issue has the following articles: (1) Innovative Materials Rise to the Radiation Challenge - Commentary by Bruce Warner; (2) The Hunt for Better Radiation Detection - New materials will help radiation detectors pick up weak signals and accurately identify illicit radioactive sources; (3) Time-Critical Technology Identifies Deadly Bloodborne Pathogens - A portable device can simultaneously distinguish up to five bloodborne pathogens in just minutes; (4) Defending Computer Networks against Attack - A Laboratory effort takes a new approach to detecting increasingly sophisticated cyber attacks; and (5) Imaging Cargo's Inner Secrets - Livermore-University of California collaborators are modeling a new radiographic technique for identifying nuclear materials concealed inside cargo containers.

  7. Science and Technology Review December 2011

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, R J

    2011-11-01

    This month's issue has the following articles: (1) High-Performance Computing for Energy Innovation - Commentary by Tomas Diaz de la Rubia; (2) Simulating the Next Generation of Energy Technologies - Projects using high-performance computing demonstrate Livermore's computational horsepower and improve the quality of energy solutions and the speed of deployment; (3) ARC Comes into Focus - The Advanced Radiographic Capability, a petawatt-class laser, can penetrate dense objects to reveal material dynamics during National Ignition Facility experiments; (4) A New Method to Track Viral Evolution - A sensitive technique developed at the Laboratory can identify virus mutations that may jump from host to host; and (5) Data for Defense: New Software Finds It Fast - Department of Defense warfighters and planners are using Livermore software systems to extract pertinent information from massive amounts of data.

  8. Science and Technology Review March 2012

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, R J

    2012-02-15

    This month's issue has the following articles: (1) Honoring a Legacy of Service to the Nation - The nation pays tribute to George Miller, who retired in December 2011 as the Laboratory's tenth director; (2) Life-Extension Programs Encompass All Our Expertise - Commentary by Bruce T. Goodwin; (3) Extending the Life of an Aging Weapon - Stockpile stewards have begun work on a multiyear effort to extend the service life of the aging W78 warhead by 30 years; (4) Materials by Design - Material microstructures go three-dimensional with improved additive manufacturing techniques developed at Livermore; (5) Friendly Microbes Power Energy-Producing Devices - Livermore researchers are demonstrating how electrogenic bacteria and microbial fuel cell technologies can produce clean, renewable energy and purify water; and (6) Chemical Sensor Is All Wires, No Batteries - Livermore's 'batteryless' nanowire sensor could benefit applications in diverse fields such as homeland security and medicine.

  9. Science and Technology Review December 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-11-17

    This month's issue has the following articles: (1) Advanced Materials for Our Past, Present, and Future - Commentary by Tomas Diaz de la Rubia; (2) A Defensive 'Coat' for Materials under Attack - Amorphous metal coatings provide the strength and corrosion resistance needed to protect military vessels and spent nuclear fuel containers; (3) Too Close for Comfort - Laboratory scientists are analyzing the feasibility of using nuclear explosives to disrupt or divert asteroids on a collision course with Earth; (4) Hyperion: A Titan of High-Performance Computing Systems - Livermore is collaborating with 10 computing industry leaders to create a test bed for Linux cluster hardware and software technologies; (5) Isolating Pathogens for Speedy Identification - An automated miniature device separates viruses, bacteria, genetic material, and proteins from nasal swabs and blood and urine samples for speedy identification.

  10. Deviation Among Technology Reviews: An Informative Enrichment of Technology Evolution Theory for Marketing

    NARCIS (Netherlands)

    A. Sood (Ashish); S. Stremersch (Stefan)

    2010-01-01

    textabstractUnderstanding technological change is of critical importance to marketers, as it bears new markets, new brands, new customers, and new market leaders. This paper examines the deviation among reviews of a technology’s performance and its consequences for inferences on technology evolution

  11. Using technology to deliver mental health services to children and youth: a scoping review.

    Science.gov (United States)

    Boydell, Katherine M; Hodgins, Michael; Pignatiello, Antonio; Teshima, John; Edwards, Helen; Willis, David

    2014-05-01

    To conduct a scoping review on the use of technology to deliver mental health services to children and youth in order to identify the breadth of peer-reviewed literature, summarize findings and identify gaps. A literature database search identified 126 original studies meeting criteria for review. Descriptive numerical summary and thematic analyses were conducted. Two reviewers independently extracted data. Studies were characterized by diverse technologies including videoconferencing, telephone and mobile phone applications and Internet-based applications such as email, web sites and CD-ROMs. The use of technologies plays a major role in the delivery of mental health services and supports to children and youth in providing prevention, assessment, diagnosis, counseling and treatment programs. Strategies are growing exponentially on a global basis, thus it is critical to study the impact of these technologies on child and youth mental health service delivery. An in-depth review and synthesis of the quality of findings of studies on effectiveness of the use of technologies in service delivery are also warranted. A full systematic review would provide that opportunity.

  12. Technological advances in the surgical treatment of movement disorders.

    Science.gov (United States)

    Gross, Robert E; McDougal, Margaret E

    2013-08-01

    Technological innovations have driven the advancement of the surgical treatment of movement disorders, from the invention of the stereotactic frame to the adaptation of deep brain stimulation (DBS). Along these lines, this review will describe recent advances in inserting neuromodulation modalities, including DBS, to the target, and in the delivery of therapy at the target. Recent radiological advances are altering the way that DBS leads are targeted and inserted, by refining the ability to visualize the subcortical targets using high-field strength magnetic resonance imaging and other innovations, such as diffusion tensor imaging, and the development of novel targeting devices enabling purely anatomical implantations without the need for neurophysiological monitoring. New portable computed tomography scanners also are facilitating lead implantation without monitoring, as well as improving radiological verification of DBS lead location. Advances in neurophysiological mapping include efforts to develop automatic target verification algorithms, and probabilistic maps to guide target selection. The delivery of therapy at the target is being improved by the development of the next generation of internal pulse generators (IPGs). These include constant current devices that mitigate the variability introduced by impedance changes of the stimulated tissue and, in the near future, devices that deliver novel stimulation patterns with improved efficiency. Closed-loop adaptive IPGs are being tested, which may tailor stimulation to ongoing changes in the nervous system, reflected in biomarkers continuously recorded by the devices. Finer-grained DBS leads, in conjunction with new IPGs and advanced programming tools, may offer improved outcomes via current steering algorithms. Finally, even thermocoagulation-essentially replaced by DBS-is being advanced by new minimally-invasive approaches that may improve this therapy for selected patients in whom it may be preferred. Functional

  13. Biofeedback treatment for sleep bruxism: a systematic review.

    Science.gov (United States)

    Wang, Lu-Fei; Long, Hu; Deng, Meng; Xu, Hui; Fang, Jie; Fan, Yi; Bai, Ding; Han, Xiang-Long

    2014-05-01

    The aim of this systematic review was to evaluate the efficacy of any biofeedback treatment on sleep bruxism. We searched the Cochrane Central Register of Controlled Trials, MEDLINE, Embase, ISI Web of Science, System for Information on Grey Literature in Europe, Chinese Biomedical Literature Database, and PsycINFO up to October 2012 for randomized controlled trials and controlled clinical trials involving biofeedback treatment for sleep bruxism. Reference lists of relevant studies were hand searched. Quality assessment and data extraction were performed by two reviewers independently. Seven eligible studies involving 240 participants were finally included. Three of them had moderate risk of bias, and four had high risk of bias. In an electromyographic-measured sleep bruxism episode, meta-analysis showed no significant difference between contingent electrical stimulation and blank control (95% confidence interval = -12.33, 3.38, P = 0.26). Moreover, five studies reported electromyographic activity index. Due to the diversity of biofeedback modalities (auditory, electrical, and visual stimulus) and controls (splint, occlusal adjustment, etc.), these data were unable to be pooled, so only qualitative description was provided. In the current stage, there is no powerful evidence to support the use of biofeedback technology on sleep bruxism treatment. Contingent electrical stimulation which is defined as a kind of biofeedback modality shows no effect on reducing sleep bruxism episode compared with the no-treatment group. Although many studies support the efficacy of biofeedback treatment, more large sample-sized randomized controlled trials which adopt uniform outcome index are necessitated to verify its application.

  14. Systematic review of treatments for atopic eczema.

    Science.gov (United States)

    Hoare, C; Li Wan Po, A; Williams, H

    2000-01-01

    Atopic eczema is the commonest inflammatory skin disease of childhood, affecting 15-20% of children in the UK at any one time. Adults make up about one-third of all community cases. Moderate-to-severe atopic eczema can have a profound effect on the quality of life for both sufferers and their families. In addition to the effects of intractable itching, skin damage, soreness, sleep loss and the social stigma of a visible skin disease, other factors such as frequent visits to doctors, special clothing and¿the need to constantly apply messy topical applications all add to the burden of disease. The cause of atopic eczema is unknown, though a genetic pre-disposition and a combination of allergic and non-allergic factors appear to be important in determining disease expression. Treatment of atopic eczema in the UK is characterised by a profusion of treatments aimed at disease control. The evidential basis of these treatments is often unclear. Most people with atopic eczema are managed in primary care where the least research has been done. The objectives of this scoping review are two-fold. To produce an up-to-date coverage 'map' of randomised controlled trials (RCTs) of treatments of atopic eczema. To assist in making treatment recommendations by summarising the available RCT evidence using qualitative and quantitative methods. Data sources included electronic searching of MEDLINE, EMBASE, the Cochrane Controlled Clinical Trials Register, the Cochrane Skin Group specialised register of trials, hand-searching of atopic eczema conference proceedings, follow-up of references in retrieved articles, contact with leading researchers and requests to relevant pharmaceutical companies. Only RCTs of therapeutic agents used in the prevention and treatment of people with atopic eczema of any age were considered for inclusion. Only studies where a physician diagnosed atopic eczema or atopic dermatitis were included. Data extraction was conducted by two observers onto abstraction

  15. Internet and information technology use in treatment of diabetes.

    Science.gov (United States)

    Kaufman, N

    2010-02-01

    This chapter contains clinical studies and reviews of the state-of-the-art regarding how information technology can help improve outcomes for patients with diabetes through enhanced education and support. With the increasing sophistication of diabetes treatment protocols and diabetes-related devices this new modality offers a remarkable opportunity for clinicians and patients. For the first time, with online tools clinicians are in a position to have a major impact on diabetes outcomes by providing robust and affordable just-in-time support to large numbers of patients who want to improve their diabetes outcomes through enhanced self-management of the complex behaviours so essential for good outcomes. Patients with diabetes often need a complex set of services and support ranging from glucose monitoring, insulin and other medication management, psychotherapy and social support, to physical activity promotion, nutrition counselling and more. Integrating these supports into a patient's therapeutic regimen presents challenges that need to be addressed through a variety of strategies. Patient self-management of diabetes enabled by information technology is becoming an important factor in the way providers deliver healthcare. Approaches using information technology to support clinical services are being dramatically altered by the confluence of several trends. * Patients want an active role in managing their own health and a collaborative relationship with their healthcare providers. * Widespread, low-cost internet access is erasing existing geographic, economic and demographic barriers to obtaining health information online, and with advanced Web 2.0 technologies high levels of interactivity can engage the patient. * Clinicians and researchers now have a deeper understanding of how people learn and respond online, and that knowledge can be crafted into solutions that produce effective, long-term behaviour change. Technology enabled approaches that show great promise to

  16. Science & Technology Review April/May 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-03-23

    This month's issue has the following articles: (1) Leveraging the National Ignition Facility to Meet the Climate-Energy Challenge--Commentary by George H. Miller; (2) The Journey into a New Era of Scientific Discoveries--The world's largest laser is dedicated on May 29, 2009; (3) Safe and Sustainable Energy with LIFE--A revolutionary technology to generate electricity, modeled after the National Ignition Facility, could either be a pure fusion energy source or combine the best of fusion and fission energy; (4) A Simulated Rehearsal for Battle--Livermore's Joint Conflict and Tactical Simulation is the most widely used tactical model in the world; (5) Improving Catalysis with a 'Noble' Material--By infusing carbon aerogels with platinum, researchers have produced a more affordable and efficient catalytic material; and (6) A Time Machine for Fast Neutrons--A new, robust time-projection chamber that provides directional detection of fast neutrons could greatly improve search methods for nuclear materials.

  17. Incorporating regulatory considerations into waste treatment technology development

    International Nuclear Information System (INIS)

    Siegel, M.R.; Powell, J.A.; Williams, T.A.; Kuusinen, T.L.; Lesperance, A.M.

    1991-02-01

    It is generally recognized that the development of new and innovative waste treatment technologies can significantly benefit the US Department of Energy's (DOE) environmental restoration and waste management program. DOE has established a research, development, demonstration, testing, and evaluation (RDDT ampersand E) program, managed by its Office of Technology Development, to encourage and direct the development of new waste treatment and management technologies. The treatment, storage, and disposal of hazardous and radioactive waste is heavily regulated both at the federal and state levels. In order to achieve the goals of applying the best new technologies in the fastest and most cost-effective manner possible, it is essential that regulatory factors be considered early and often during the development process. This paper presents a number of regulatory issues that are relevant to any program intended to encourage the development of new waste treatment and management technologies. It will also address how the use of these basic regulatory considerations can help ensure that technologies that are developed are acceptable to regulators and can therefore be deployed in the field. 2 refs

  18. Science & Technology Review September/October 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2008-07-21

    This issue has the following articles: (1) Answering Scientists Most Audacious Questions--Commentary by Dona Crawford; (2) Testing the Accuracy of the Supernova Yardstick--High-resolution simulations are advancing understanding of Type Ia supernovae to help uncover the mysteries of dark energy; (3) Developing New Drugs and Personalized Medical Treatment--Accelerator mass spectrometry is emerging as an essential tool for assessing the effects of drugs in humans; (4) Triage in a Patch--A painless skin patch and accompanying detector can quickly indicate human exposure to biological pathogens, chemicals, explosives, or radiation; and (5) Smoothing Out Defects for Extreme Ultraviolet Lithography--A process for smoothing mask defects helps move extreme ultraviolet lithography one step closer to creating smaller, more powerful computer chips.

  19. Information technology and behavioral medicine: impact on autism treatment & research.

    Science.gov (United States)

    Oberleitner, Ron; Laxminarayan, Swamy

    2004-01-01

    Families, clinicians and researchers involved with varying neurological disorders face amazing challenges to understand, treat, and assist the people they are serving. Autism brings unique challenges and serves as an important model for the application of important concepts in information technology and telemedicine. The rising incidence of autism with limited professional resources has led to more consideration for using information technology and related specialties to link families and professionals, and to implement strategies which implement information technology to improve the outcomes for individuals with autism and their families. These are reviewed in context of the unique health, education, and the research issues facing those dealing with autism.

  20. Health implications of new-age technologies: a systematic review.

    Science.gov (United States)

    Bilgrami, Zaid; McLAUGHLIN, Laura; Milanaik, Ruth; Adesman, Andrew

    2017-08-01

    New-age technologies are ubiquitous in the lives of adolescents. Recent trends in media use suggest that adolescents are spending more time than ever engaging with technologies, and are able to do so in virtually all settings at any time. Given that new-age technologies are so heavily integrated within the daily life of adolescents, the health risks and benefits they offer must be closely examined. In this systematic review, we present recent literature related to the implications of new-age technologies on adolescent health. A total of 94 articles published since 2006 were collected using PubMed and Google Scholar on the most popular new-age technologies among adolescents: the internet, television, cell phones, and video games. The current body of research highlights several health risks related to these technologies. Nearly all have the potential for addiction, which can result in other symptoms and impair one's daily life. Excessive use can affect several components of health, such as quality of sleep, body composition, and mental well-being, and certain practices (viewing pornography, sexting) can lead to risky sexual behaviors. However, the technologies discussed in the present review also have tremendous potential to promote adolescent health. Pediatricians must educate parents and patients on how to safely use technology to minimize the potentially harmful outcomes.

  1. Review of casing while drilling technology

    Directory of Open Access Journals (Sweden)

    Pavković Bojan

    2016-01-01

    Full Text Available Conventional drilling methods have been plagued with huge operational and financial challenges, such as cost of purchasing, inspecting, handling, transporting the drill equipment and most importantly, tripping in-and-out of the drill string whenever the Bottom Hole Assembly (BHA needs a replacement, needs of wiper trip or when total depth is reached. The tripping in-and-out of the drill string not only contributes to Non Productive Time (NPT but also leads to well control difficulties including wellbore instability and lost circulation. All this has led Oil and Gas industry, as well as any other engineering industry, to seek for new ways and methods in order to reduce these problems. Thanks to the advances in technical solutions and constant improvements of conventional drilling methods, a new drilling method - casing while drilling has been developed. Casing Drilling encompasses the process of simultaneously drilling and casing a well, using the active casing and thus optimizes the production. This paper presents a review of casing while drilling method (CwD and its practical usage in drilling wells. The comparison of conventional drilling method and casing while drilling is also presented. The CwD method achieves significantly better results than conventional drilling method.

  2. Foam-mat drying technology: A review.

    Science.gov (United States)

    Hardy, Z; Jideani, V A

    2017-08-13

    This article reviews various aspects of foam-mat drying such as foam-mat drying processing technique, main additives used for foam-mat drying, foam-mat drying of liquid and solid foods, quality characteristics of foam-mat dried foods, and economic and technical benefits for employing foam-mat drying. Foam-mat drying process is an alternative method that allows the removal of water from liquid materials and pureed materials. In this drying process, a liquid material is converted into foam that is stable by being whipped after adding an edible foaming agent. The stable foam is then spread out in sheet or mat and dried by using hot air (40-90°C) at atmospheric pressure. Methyl cellulose (0.25-2%), egg white (3-20%), maltodextrin (0.5-05%), and gum Arabic (2-9%) are the commonly utilized additives for the foam-mat drying process at the given range, either combined together for their effectiveness or individual effect. The foam-mat drying process is suitable for heat sensitive, viscous, and sticky products that cannot be dried using other forms of drying methods such as spray drying because of the state of product. More interest has developed for foam-mat drying because of the simplicity, cost effectiveness, high speed drying, and improved product quality it provides.

  3. Plastic solid waste utilization technologies: A Review

    Science.gov (United States)

    Awasthi, Arun Kumar; Shivashankar, Murugesh; Majumder, Suman

    2017-11-01

    Plastics are used in more number of applications in worldwide and it becomes essential part of our daily life. In Indian cities and villages people use the plastics in buying vegetable as a carry bag, drinking water bottle, use of plastic furniture in home, plastics objects uses in kitchen, plastic drums in packing and storage of the different chemicals for industrial use, use plastic utensils in home and many more uses. After usage of plastics it will become part of waste garbage and create pollution due to presence of toxic chemicals and it will be spread diseases and give birth to uncontrolled issues in social society. In current scenario consumption of plastic waste increasing day by day and it is very difficult to manage the plastic waste. There are limited methodologies available for reutilization of plastic waste again. Such examples are recycling, landfill, incineration, gasification and hydrogenation. In this paper we will review the existing methodologies of utilization of plastic waste in current scenario

  4. Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

    Science.gov (United States)

    Strudwick, Gillian

    2015-05-01

    The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

  5. A review of multifunctional structure technology for aerospace applications

    Science.gov (United States)

    Sairajan, K. K.; Aglietti, G. S.; Mani, K. M.

    2016-03-01

    The emerging field of multifunctional structure (MFS) technologies enables the design of systems with reduced mass and volume, thereby improving their overall efficiency. It requires developments in different engineering disciplines and their integration into a single system without degrading their individual performances. MFS is particularly suitable for aerospace applications where mass and volume are critical to the cost of the mission. This article reviews the current state of the art of multifunctional structure technologies relevant to aerospace applications.

  6. Application of spent fuel treatment technology to plutonium immobilization

    International Nuclear Information System (INIS)

    McPheeters, C.C.; Ackerman, J.P.; Gay, E.C., Johnson, G.K.

    1996-01-01

    The purpose of the electrometallurgical treatment technology being developed at Argonne National Laboratory (ANL) is to convert certain spent nuclear fuels into waste forms that are suitable for disposal in a geological repository for nuclear waste. The spent fuels of interest are those that cannot be safely stored for a long time in their current condition, and those that cannot be qualified for repository disposal. This paper explores the possibility of applying this electrometallurgical treatment technology to immobilization of surplus fissile materials, primarily plutonium. Immobilization of surplus fissile materials by electrometallurgical treatment could be done in the same facilities, at the same time. and in the same equipment as the proposed treatment of the present inventory of spent nuclear fuel. The cost and schedule savings of this simultaneous treatment scheme would be significant

  7. Technology-Enhanced Peer Review: Benefits and Implications of Providing Multiple Reviews

    DEFF Research Database (Denmark)

    Papadopoulos, Pantelis M.; Lagkas, Thomas D.; Demetriadis, Stavros N.

    2017-01-01

    This study analyses the impact of self and peer feedback in technology-enhanced peer review settings. The impact of receiving peer comments (“receiver” perspective) is compared to that of reaching own insights by reviewing others’ work (“giver” perspective). In this study, 38 sophomore students...... were randomly assigned in two conditions and engaged in peer review activity facilitated by a web-based learning environment asking them to provide multiple reviews. In the Peer Reviewed (PR) condition students both reviewed peer work and received peer comments for their own work. By contrast......, in the Self Reviewed (SR) condition students provided peer reviews, but did not receive any. Instead, they were asked to perform self reviewing, before proceeding to any revisions of their work. Result showed that the two groups were comparable in all aspects, suggesting that the lack of getting peer reviews...

  8. Hemimorphite Ores: A Review of Processing Technologies for Zinc Extraction

    Science.gov (United States)

    Chen, Ailiang; Li, Mengchun; Qian, Zhen; Ma, Yutian; Che, Jianyong; Ma, Yalin

    2016-10-01

    With the gradual depletion of zinc sulfide ores, exploration of zinc oxide ores is becoming more and more important. Hemimorphite is a major zinc oxide ore, attracting much attention in the field of zinc metallurgy although it is not the major zinc mineral. This paper presents a critical review of the treatment for extraction of zinc with emphasis on flotation, pyrometallurgical and hydrometallurgical methods based on the properties of hemimorphite. The three-dimensional framework structure of hemimorphite with complex linkage of its structural units lead to difficult desilicification before extracting zinc in the many metallurgical technologies. It is found that the flotation method is generally effective in enriching zinc minerals from hemimorphite ores into a high-grade concentrate for recovery of zinc. Pure zinc can be produced from hemimorphite or/and willemite with a reducing reagent, like methane or carbon. Leaching reagents, such as acid and alkali, can break the complex structure of hemimorphite to release zinc in the leached solution without generation of silica gel in the hydrometallurgical process. For optimal zinc extraction, combing flotation with pyrometallurgical or hydrometallurgical methods may be required.

  9. Managing diabetes mellitus using information technology: a systematic review.

    Science.gov (United States)

    Riazi, H; Larijani, B; Langarizadeh, M; Shahmoradi, L

    2015-01-01

    To review published evidences about using information technology interventions in diabetes care and determine their effects on managing diabetes. Systematic review of information technology based interventions. MEDLINE®/PubMed were electronically searched for articles published between 2004/07/01 and 2014/07/01. A comprehensive, electronic search strategy was used to identify eligible articles. Inclusion criteria were defined based on type of study and effect of information technology based intervention in relation to glucose control and other clinical outcomes in diabetic patients. Studies must have used a controlled design to evaluate an information technology based intervention. A total of 3613 articles were identified based on the searches conducted in MEDLINE from PubMed. After excluding duplicates (n = 6), we screened titles and abstracts of 3607 articles based on inclusion criteria. The remaining articles matched with inclusion criteria (n = 277) were reviewed in full text, and 210 articles were excluded based on exclusion criteria. Finally, 67 articles complied with our eligibility criteria and were included in this study. In this study, the effect of various information technology based interventions on clinical outcomes in diabetic patients extracted and measured from selected articles is described and compared to each other. Information technology based interventions combined with the usual care are associated with improved glycemic control with different efficacy on various clinical outcomes in diabetic patients.

  10. Review of Social and Organizational Issues in Health Information Technology

    OpenAIRE

    Kuziemsky, Craig E.

    2015-01-01

    Objectives This paper reviews organizational and social issues (OSIs) in health information technology (HIT). Methods A review and synthesis of the literature on OSIs in HIT was conducted. Results Five overarching themes with respect to OSIs in HIT were identified and discussed: scope and frameworks for defining OSIs in HIT, context matters, process immaturity and complexity, trade-offs will happen and need to be discussed openly, and means of studying OSIs in HIT. Conclusions There is a wide...

  11. Review of Military Mountain Medicine Technology and Research Barriers

    Science.gov (United States)

    2011-09-01

    2.4.5 Nutritional and Hydration Guidelines 7 3.0 Review of Militarily-Relevant Mountain Medicine Technology and 7 Research Barriers 3.1...Interventions ( nutritional , pharmaceutical) to improve troop performance and health during high altitude deployments. 3) Prepare a report that: REVIEW OF...Edema (HAPE). The signs and symptoms of AMS are headache accompanied by insomnia, unusual fatigue, dizziness, anorexia , and nausea. AMS is not

  12. A review of the radiological treatment

    International Nuclear Information System (INIS)

    Mueller, C.J.; Folga, S.; Nabelssi, B.; Kohout, E.

    1996-01-01

    The Draft Waste Management Programmatic Environmental Impact Statement (WM PEIS) was released by the U.S. Department of Energy (DOE) for public comment on September 22, 1995. Prepared in accordance with the National Environmental Policy Act (NEPA), the Final WM PEIS is currently scheduled for release in late summer 1996. The Draft WM PEIS was published after about 3 years of effort to select and evaluated the best alternatives for treating, storing, and disposing of the 50-year legacy of radioactive and chemically hazardous wastes existing within the DOE complex. The evaluation examined the potential health and environmental impacts of integrated waste management alternatives for five categories of waste types at 54 DOE sites. A primary consideration as a potential source of human health impacts at all sites is that of radiological releases resulting from postulated accidents involving facilities used to treat radioactive wastes. This paper first provides a brief, updated summary of the approach used to define and perform treatment facility accident analyses in the Draft WM PEIS. It reviews the selection of dominant sequences for the major sites most affected by the preferred waste management alternatives and highlights the salient accident analysis results. Finally, it summarizes and addresses key public and state and federal agency comments relating to accident analysis that were received in the public comment process

  13. The Impact of Advanced Technologies on Treatment Deviations in Radiation Treatment Delivery

    International Nuclear Information System (INIS)

    Marks, Lawrence B.; Light, Kim L.; Hubbs, Jessica L.; Georgas, Debra L.; Jones, Ellen L.; Wright, Melanie C.; Willett, Christopher G.; Yin Fangfang

    2007-01-01

    Purpose: To assess the impact of new technologies on deviation rates in radiation therapy (RT). Methods and Materials: Treatment delivery deviations in RT were prospectively monitored during a time of technology upgrade. In January 2003, our department had three accelerators, none with 'modern' technologies (e.g., without multileaf collimators [MLC]). In 2003 to 2004, we upgraded to five new accelerators, four with MLC, and associated advanced capabilities. The deviation rates among patients treated on 'high-technology' versus 'low-technology' machines (defined as those with vs. without MLC) were compared over time using the two-tailed Fisher's exact test. Results: In 2003, there was no significant difference between the deviation rate in the 'high-technology' versus 'low-technology' groups (0.16% vs. 0.11%, p = 0.45). In 2005 to 2006, the deviation rate for the 'high-technology' groups was lower than the 'low-technology' (0.083% vs. 0.21%, p = 0.009). This difference was caused by a decline in deviations on the 'high-technology' machines over time (p = 0.053), as well as an unexpected trend toward an increase in deviations over time on the 'low-technology' machines (p = 0.15). Conclusions: Advances in RT delivery systems appear to reduce the rate of treatment deviations. Deviation rates on 'high-technology' machines with MLC decline over time, suggesting a learning curve after the introduction of new technologies. Associated with the adoption of 'high-technology' was an unexpected increase in the deviation rate with 'low-technology' approaches, which may reflect an over-reliance on tools inherent to 'high-technology' machines. With the introduction of new technologies, continued diligence is needed to ensure that staff remain proficient with 'low-technology' approaches

  14. Mobile technology in health information systems - a review.

    Science.gov (United States)

    Zhang, X-Y; Zhang, P-Y

    2016-05-01

    Mobile technology is getting involved in every sphere of life including medical health care. There has been an immense upsurge in mobile phone-based health innovations these days. The expansion of mobile phone networks and the proliferation of inexpensive mobile handsets have made the digital information and communication technology capabilities very handy for the people to exploit if for any utility including health care. The mobile phone based innovations are able to transform weak and under performing health information system into more modern and efficient information system. The present review article will enlighten all these aspects of mobile technology in health care.

  15. The development of radioactive waste treatment technology(IV)

    International Nuclear Information System (INIS)

    Kim, Joon Hyung; Yim, Sung Paal; Lee, Kune Woo; Yoo, Jeong Woo; Kim, Young Min; Park, Seong Chul

    1992-03-01

    Following studies were performed in the project of development of radioactive waste treatment technology. 1) Treatment of radioactive borated liquid wastes by reverse osmosis : Separation characteristics of boric acid were estimated using cellulose acetate membrane and aromatic polyamide membrane. The performance of reverse osmosis process was evaluated in terms of boric acid recovery, radiochemical rejection, and membrane flux by operating variables such as applied pressure and feed concentration. 2) Oily waste treatment : The mathematical model to estimate oil removal efficiency is to be proposed at coalescence column. 3) Treatment of radioactive laundry waste 4) Comparison of evaporation and ion-exchange 5) State of the art of high integrity container. (Author)

  16. Assistive technology for communication of older adults: a systematic review.

    Science.gov (United States)

    Pedrozo Campos Antunes, Thaiany; Souza Bulle de Oliveira, Acary; Hudec, Robert; Brusque Crocetta, Tania; Ferreira de Lima Antão, Jennifer Yohanna; de Almeida Barbosa, Renata Thais; Guarnieri, Regiani; Massetti, Thais; Garner, David M; de Abreu, Luiz Carlos

    2018-02-16

    Describe the use of assistive technology to enhance communication opportunities for older adults. A systematic review was conducted in two databases, PubMed and Web of Science, by using two different searches in each. The search was limited to original articles, in English language, including people aged 60 years and older that used any type of assistive technology for communication. The articles found in the initial search were filtered by title, abstracts and the remaining articles were fully read. Eighteen studies were included in this review after the reading of full-texts. Most of the studies included apparently healthy participants with communication limitations due to aging related changes and the others included people with some pathology that prevent them from normal communication. Four categories of assistive technology were identified: assistive technology for people with speech problems; robot or videoconferencing systems; Information and Communication Technologies and, other types of assistive technology for communication, such as hearing aids and scrapbooks. Assistive technology for communication of older adults is not only used by people with disabilities that prevent them from usual communication. They are mostly for older adults without a pathological communication problem.

  17. A Review of Behavioral Conceptualizations and Treatments of Child Noncompliance.

    Science.gov (United States)

    Houlihan, Daniel; And Others

    1992-01-01

    This review of behavioral conceptualizations and approaches to the treatment of child noncompliance includes discussion of behavioral definitions, methods of assessment, types of behavioral interventions, generalization of treatment effects, future research directions, and potential ethical concerns. (Author/JDD)

  18. Overview of non-thermal mixed waste treatment technologies: Treatment of mixed waste (ex situ); Technologies and short descriptions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This compendium contains brief summaries of new and developing non- thermal treatment technologies that are candidates for treating hazardous or mixed (hazardous plus low-level radioactive) wastes. It is written to be all-encompassing, sometimes including concepts that presently constitute little more than informed ``ideas``. It bounds the universe of existing technologies being thought about or considered for application on the treatment of such wastes. This compendium is intended to be the very first step in a winnowing process to identify non-thermal treatment systems that can be fashioned into complete ``cradle-to-grave`` systems for study. The purpose of the subsequent systems paper studies is to investigate the cost and likely performance of such systems treating a representative sample of U.S. Department of Energy (DOE) mixed low level wastes (MLLW). The studies are called Integrated Non-thermal Treatment Systems (INTS) Studies and are being conducted by the Office of Science and Technology (OST) of the Environmental Management (EM) of the US Department of Energy. Similar studies on Integrated Thermal Treatment Systems have recently been published. These are not designed nor intended to be a ``downselection`` of such technologies; rather, they are simply a systems evaluation of the likely costs and performance of various non- thermal technologies that have been arranged into systems to treat sludges, organics, metals, soils, and debris prevalent in MLLW.

  19. Overview of non-thermal mixed waste treatment technologies: Treatment of mixed waste (ex situ); Technologies and short descriptions

    International Nuclear Information System (INIS)

    1995-07-01

    This compendium contains brief summaries of new and developing non- thermal treatment technologies that are candidates for treating hazardous or mixed (hazardous plus low-level radioactive) wastes. It is written to be all-encompassing, sometimes including concepts that presently constitute little more than informed ''ideas''. It bounds the universe of existing technologies being thought about or considered for application on the treatment of such wastes. This compendium is intended to be the very first step in a winnowing process to identify non-thermal treatment systems that can be fashioned into complete ''cradle-to-grave'' systems for study. The purpose of the subsequent systems paper studies is to investigate the cost and likely performance of such systems treating a representative sample of U.S. Department of Energy (DOE) mixed low level wastes (MLLW). The studies are called Integrated Non-thermal Treatment Systems (INTS) Studies and are being conducted by the Office of Science and Technology (OST) of the Environmental Management (EM) of the US Department of Energy. Similar studies on Integrated Thermal Treatment Systems have recently been published. These are not designed nor intended to be a ''downselection'' of such technologies; rather, they are simply a systems evaluation of the likely costs and performance of various non- thermal technologies that have been arranged into systems to treat sludges, organics, metals, soils, and debris prevalent in MLLW

  20. Novel Technology for Phenol Wastewater Treatment Using Electrochemical Reactor

    Directory of Open Access Journals (Sweden)

    Yuncheng Xie

    2015-01-01

    Full Text Available There are various electrochemical approaches to save energy, mostly by means of equipment improvement coupled with other water treatment technologies. Replacement of DC power with pulse power, modified reactor coupled with photocatalysis can decrease cost. But more or less additional input is developed, or infrastructure has to be replaced. In this paper, an N-Step electrochemical reactor, based on stage reaction modeling, is put forward. On the basis of not changing equipment investment and by adjustment of the operating current density at different levels, power consumption decreases. This model develops a foundation of electrochemical water treatment technology for the engineering application.

  1. Highly Polluted Wastewaters Treatment by Improved Dissolved Air Flotation Technology

    Science.gov (United States)

    Moga, I. C.; Covaliu, C. I.; Matache, M. G.; Doroftei, B. I.

    2017-06-01

    Numerous investigations are oriented towards the development of new wastewater treatment technologies, having high efficiencies for removing even low concentrations of pollutants found in water. These efforts were determined by the destroyer impact of the pollutants to the environment and human’s health. For this reason this paper presents our study concerning an improved dissolved air flotation technology for wastewater treatment. There is described a dissolved air flotation (DAF) installation composed by two equipments: pressurized capsule and lamellar settling. Also, there are presented some advantages of using nanoparticles as flotation collectors.

  2. A Review of Pharmacologic Treatment for Compulsive Buying Disorder

    OpenAIRE

    Soares, Célia; Fernandes, Natália; Morgado, Pedro

    2016-01-01

    At present, no treatment recommendations can be made for compulsive buying disorder. Recent studies have found evidence for the efficacy of psychotherapeutic options, but less is known regarding the best pharmacologic treatment. The purpose of this review is to present and analyze the available published evidence on the pharmacological treatment of compulsive buying disorder. To achieve this, we conducted a review of studies focusing on the pharmacological treatment of compulsive buying by se...

  3. Radiation processing technology for industrial waste water treatment

    International Nuclear Information System (INIS)

    2011-01-01

    Radiation sterilization technology, cross-linked polymers and curing, food and environmental applications of the radiation is widely used for many years. At the same time, drinking water and wastewater treatment are the part of the radiation technology applications. For this purpose, drinking water and wastewater treatment plants in various countries has been established. In this project, gamma / electron beam radiation treatment is intended to be used for the treatment of alkaloid, textiles and polychlorinated biphenyls (PCBs) wastewater. In this regard, the chemical characterization of wastewater, the interaction with radiation, biological treatment and determination of toxicological properties are the laboratory studies milestones. After laboratory studies, the establishment of a pilot scale treatment plant has been planned. Within the framework of the project a series of dye used in textile industry were examined. Besides the irradiation, the changes in treatment efficiency were investigated by using of oxygen and hydrogen peroxide in conjunction with the irradiation. Same working methods were implemented in the wastewater treatment of Bolvadin Opium Alkaloid Factory as well. In addition to chemical analysis in this study, aerobic and anaerobic biological treatment process also have been applied. Standard reference materials has been used for the marine sediment study contaminated with polychlorinated biphenyls.

  4. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  5. 78 FR 11902 - Review of Gun Safety Technologies

    Science.gov (United States)

    2013-02-20

    ... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1615] Review of Gun Safety...'s Plan to reduce gun violence released on January 16, 2013, the U.S. Department of Justice, Office... emerging gun safety technologies and plans to issue a report on the availability and use of those...

  6. RESIDENTIAL WOOD COMBUSTION TECHNOLOGY REVIEW VOLUME 1. TECHNICAL REPORT

    Science.gov (United States)

    This report gives results of a review of the current state-of-the-art of residential wood combustion (RWC). The key environmental parameter of concern was the air emission of particles. The technological status of all major RWC categories -- cordwood stoves, fireplaces, masonry h...

  7. RESIDENTIAL WOOD COMBUSTION TECHNOLOGY REVIEW - VOLUME 2. APPENDICES

    Science.gov (United States)

    The report gives results of a review of the current state-of-the-art of residential wood combustion (RWC). The key environmental parameter of concern was the air emission of particles. The technological status of all major RWC categories--cordwood stoves, fireplaces, masonry heat...

  8. Working Together: A Literature Review of Campus Information Technology Partnerships

    Science.gov (United States)

    Exline, Eleta

    2009-01-01

    This article reviews the recent literature about the essential but often uneasy alliances made between content experts (archivists and librarians) and technology experts. Differing professional cultures, misunderstandings of one another, limited abilities to envision change, and lack of support from top-level administrators are the most often…

  9. Development and implementation of technologies for physical telerehabilitation in Latin America: a systematic review of literature, programs and projects

    OpenAIRE

    Narváez, Fabián; Marín-Castrillón, Diana M; Cuenca, Ma. Cisne; Latta, Ma. Augusta

    2017-01-01

    Abstract Telerehabilitation has arised by the inclusion of emerging technologies for capturing, transmitting, analyzing and visualizing movement patterns associated to musculoskeletal disorders. This therapeutic strategy enables to carry out diagnosis processes and provide rehabilitation treatments. This paper presents a systematic review of the current development and implementation of telerehabilitation technologies in Latin America. The main goal is to explore the scientific literature and...

  10. Treatment of olecranon bursitis: a systematic review.

    Science.gov (United States)

    Sayegh, Eli T; Strauch, Robert J

    2014-11-01

    The optimal management of olecranon bursitis is ill-defined. The purposes of this review were to systematically evaluate clinical outcomes for aseptic versus septic bursitis, compare surgical versus nonsurgical management, and examine the roles of corticosteroid injection and aspiration in aseptic bursitis. The English-language literature was searched using PubMed, Cumulative Index to Nursing and Allied Health Literature, Physiotherapy Evidence Database, Allied and Complementary Medicine, and Cochrane Central Register of Controlled Trials. Analyses were performed for clinical resolution and complications after treatment of aseptic and/or septic olecranon bursitis. Twenty-nine studies containing 1278 patients were included. Compared with septic bursitis, aseptic bursitis was associated with a significantly higher overall complication rate (p = 0.0108). Surgical management was less likely to clinically resolve septic or aseptic bursitis (p = 0.0476), and demonstrated higher rates of overall complications (p = 0.0117), persistent drainage (p = 0.0194), and bursal infection (p = 0.0060) than nonsurgical management. Corticosteroid injection for aseptic bursitis was associated with increased overall complications (p = 0.0458) and skin atrophy (p = 0.0261). Aspiration did not increase the risk of bursal infection for aseptic bursitis. Based primarily on level IV evidence, nonsurgical management of olecranon bursitis is significantly more effective and safer than surgical management. The clinical course of aseptic bursitis appears to be more complicated than that of septic bursitis. Corticosteroid injection is associated with significant risks without improving the outcome of aseptic bursitis. Therapeutic IV.

  11. The mechanisms of heavy metal immobilization by cementitious material treatments and thermal treatments: A review.

    Science.gov (United States)

    Guo, Bin; Liu, Bo; Yang, Jian; Zhang, Shengen

    2017-05-15

    Safe disposal of solid wastes containing heavy metals is a significant task for environment protection. Immobilization treatment is an effective technology to achieve this task. Cementitious material treatments and thermal treatments are two types of attractive immobilization treatments due to that the heavy metals could be encapsulated in their dense and durable wasteforms. This paper discusses the heavy metal immobilization mechanisms of these methods in detail. Physical encapsulation and chemical stabilization are two fundamental mechanisms that occur simultaneously during the immobilization processes. After immobilization treatments, the wasteforms build up a low permeable barrier for the contaminations. This reduces the exposed surface of wastes. Chemical stabilization occurs when the heavy metals transform into more stable and less soluble metal bearing phases. The heavy metal bearing phases in the wasteforms are also reviewed in this paper. If the heavy metals are incorporated into more stable and less soluble metal bearing phases, the potential hazards of heavy metals will be lower. Thus, converting heavy metals into more stable phases during immobilization processes should be a common way to enhance the immobilization effect of these immobilization methods. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Evaluating the technical aspects of mixed waste treatment technologies

    International Nuclear Information System (INIS)

    Bagaasen, L.M.; Scott, P.A.

    1992-10-01

    This report discusses treatment of mixed wastes which is thought to be more complicated than treatment of either hazardous or radioactive wastes. In fact, the treatment itself is no more complicated: however, the regulations that define acceptability of the final waste disposal system are significantly more entangled, and sometimes in apparent conflict. This session explores the factors that influence the choice of waste treatment technologies, and expands on some of the limitations to their application. The objective of the presentation is to describe the technical factors that influence potential treatment processes and the ramifications associated with particular selections (for example, the generation of secondary waste streams). These collectively provide a framework for making informed treatment process selections

  13. Technology review: prototyping platforms for monitoring ambient conditions.

    Science.gov (United States)

    Afolaranmi, Samuel Olaiya; Ramis Ferrer, Borja; Martinez Lastra, Jose Luis

    2018-05-08

    The monitoring of ambient conditions in indoor spaces is very essential owing to the amount of time spent indoors. Specifically, the monitoring of air quality is significant because contaminated air affects the health, comfort and productivity of occupants. This research work presents a technology review of prototyping platforms for monitoring ambient conditions in indoor spaces. It involves the research on sensors (for CO 2 , air quality and ambient conditions), IoT platforms, and novel and commercial prototyping platforms. The ultimate objective of this review is to enable the easy identification, selection and utilisation of the technologies best suited for monitoring ambient conditions in indoor spaces. Following the review, it is recommended to use metal oxide sensors, optical sensors and electrochemical sensors for IAQ monitoring (including NDIR sensors for CO 2 monitoring), Raspberry Pi for data processing, ZigBee and Wi-Fi for data communication, and ThingSpeak IoT platform for data storage, analysis and visualisation.

  14. Reprint of: Pyrolysis technologies for municipal solid waste: A review

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Dezhen, E-mail: chendezhen@tongji.edu.cn [Thermal & Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); Yin, Lijie; Wang, Huan [Thermal & Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); He, Pinjing [State Key Laboratory of Pollution Control and Resource Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China)

    2015-03-15

    Highlights: • MSW pyrolysis reactors, products and environmental impacts are reviewed. • MSW pyrolysis still has to deal with flue gas emissions and products’ contamination. • Definition of standardized products is suggested to formalize MSW pyrolysis technology. • Syngas is recommended to be the target product for single MSW pyrolysis technology. - Abstract: Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO{sub 2} and NH{sub 3}, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.

  15. Pyrolysis technologies for municipal solid waste: A review

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Dezhen, E-mail: chendezhen@tongji.edu.cn [Thermal and Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); Yin, Lijie; Wang, Huan [Thermal and Environmental Engineering Institute, Tongji University, Shanghai 200092 (China); He, Pinjing [State Key Laboratory of Pollution Control and Resource Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China)

    2014-12-15

    Highlights: • MSW pyrolysis reactors, products and environmental impacts are reviewed. • MSW pyrolysis still has to deal with flue gas emissions and products’ contamination. • Definition of standardized products is suggested to formalize MSW pyrolysis technology. • Syngas is recommended to be the target product for single MSW pyrolysis technology. - Abstract: Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO{sub 2} and NH{sub 3}, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.

  16. Reviews on laser cutting technology for industrial applications

    Science.gov (United States)

    Muangpool, T.; Pullteap, S.

    2018-03-01

    In this paper, an overview of the laser technology applied for the industrial has been reviewed. In general, this technology was used in several engineering applications such as industrial, medical, science, research sectors, etc. Focusing on the laser technology in the industrial section, it was, normally, employed for many purposes i.e. target marking, welding, drilling, and also cutting. Consequently, the laser cutting technology was, however, divided into three classifications YAG, CO2, and fiber laser, respectively. Each laser types have different advantages and disadvantages depending on the material type. The advantages by using laser cutting compared with the general cutting machines were exploited in terms of narrow kerf, high cutting speed, low heat-affected zone (HAZ), improve efficiency of the cutting process, high accuracy, etc. However, the main objectives from the technology used were increasing of the products and also decreasing the production cost. In the opposite way, some disadvantages of the technology were summarized by complexity to operate, high maintenance cost, and also high power consumption. In Thailand industry, there were many factories used this technology as a cutting process. Unfortunately, only few researches were published. It might explains that this technology were difficulty to develop, high investment, and also easy to import from aboard. For becoming to the Thailand 4.0 community, the Thailand industry might awareness to reduce the importing machine and boosting some policies to create novel innovative / know-how from the own country.

  17. Technological Solutions for Older People with Alzheimer's Disease: Review.

    Science.gov (United States)

    Maresova, Petra; Tomsone, Signe; Lameski, Petre; Madureira, Joana; Mendes, Ana; Zdravevski, Eftim; Chorbev, Ivan; Trajkovik, Vladimir; Ellen, Moriah; Rodile, Kasper

    2018-04-27

    In the nineties, numerous studies began to highlight the problem of the increasing number of people with Alzheimer's disease in developed countries, especially in the context of demographic progress. At the same time, the 21st century is typical of the development of advanced technologies that penetrate all areas of human life. Digital devices, sensors, and intelligent applications are tools that can help seniors and allow better communication and control of their caregivers. The aim of the paper is to provide an up-to-date summary of the use of technological solutions for improving health and safety for people with Alzheimer's disease. Firstly, the problems and needs of senior citizens with Alzheimer's disease (AD) and their caregivers are specified. Secondly, a scoping review is performed regarding the technological solutions suggested to assist this specific group of patients. Works obtained from the following libraries used in this scoping review: Web of Science, PubMed, Springer, ACM and IEEE Xplore. Four independent reviewers screened the identified records and selected relevant articles which were published in the period from 2007 to 2018. A total of 6,705 publications were selected. In all, 128 full papers were screened. Results obtained from the relevant studies were furthermore divided into the following categories according to the type and use of technologies: devices, processing, and activity recognition. The leading technological solution in the category of devices are wearables and ambient non-invasive sensors. The introduction and utilization of these technologies however brings about challenges in acceptability, durability, ease of use, communication, and power requirements. Furthermore, in needs to be pointed out that these technological solutions should be based on open standards. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  18. A critical review of treatment approaches for gambling disorders.

    Science.gov (United States)

    Stea, Jonathan N; Hodgins, David C

    2011-06-01

    This review presents the theoretical model, evidence base, and theoretical and methodological issues for seven treatment approaches to gambling disorders: 1) psychoanalytic and psychodynamic treatments, 2) Gamblers Anonymous, 3) behavioural treatments, 4) cognitive and cognitive-behavioural therapies, 5) brief, motivational, and self-directed interventions, 6) pharmacotherapies, and 7) family therapy approaches. Throughout the review, broader clinical and research issues are also discussed, including barriers to treatment-seeking, controlled gambling versus abstinence as a treatment goal, comorbidity, and the evaluation of treatment efficacy and effectiveness.

  19. Hadron-therapy: applications of accelerator technologies to tumour treatments

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    In the second part the technologies of dose delivery are described emphasising the main challenges of modern radiotherapy, in particular the treatment of moving organs. In this framework the properties of the beams produced by conventional accelerators (cyclotrons and synchrotrons) are compared with the ones due to two novel approaches based on fast cycling machines, as FFAGs and cyclinacs.

  20. Adapting UASB technology for sewage treatment in Palestine and Jordan

    NARCIS (Netherlands)

    Mahmoud, N.A.; Zeeman, G.; Lier, van J.B.

    2008-01-01

    High rate anaerobic technologies offer cost-effective solutions for "sewage" treatment in the temperate climate of Palestine and Jordan. However, local sewage characteristics demand amendments to the conventional UASB reactor design. A solution is found in a parallel operating digester unit that

  1. The Melt-Dilute Treatment Technology Offgas Development Status Report

    International Nuclear Information System (INIS)

    Adams, T. M.

    1999-01-01

    The melt-dilute treatment technology is being developed to facilitate the ultimate disposition of highly enriched Al-Base DOE spent nuclear fuels in a geologic repository such as that proposed for Yucca Mountain. The melt-dilute process is a method of preparing DOE spent nuclear fuel for long term storage

  2. Nonpharmacologic Treatments for Childhood Constipation : Systematic Review

    NARCIS (Netherlands)

    Tabbers, Merit M.; Boluyt, Nicole; Berger, Marjolein Y.; Benninga, Marc A.

    2011-01-01

    OBJECTIVE: To summarize the evidence and assess the reported quality of studies concerning nonpharmacologic treatments for childhood constipation, including fiber, fluid, physical movement, prebiotics, probiotics, behavioral therapy, multidisciplinary treatment, and forms of alternative medicine.

  3. Nonpharmacologic treatments for childhood constipation: systematic review

    NARCIS (Netherlands)

    Tabbers, Merit M.; Boluyt, Nicole; Berger, Marjolein Y.; Benninga, Marc A.

    2011-01-01

    To summarize the evidence and assess the reported quality of studies concerning nonpharmacologic treatments for childhood constipation, including fiber, fluid, physical movement, prebiotics, probiotics, behavioral therapy, multidisciplinary treatment, and forms of alternative medicine. We

  4. Pilot demonstrations of arsenic treatment technologies in U.S. Department of Energy Arsenic Water Technology Partnership program.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Aragon, Alicia R.; Siegal Malcolm D.; Dwyer, Brian P.

    2005-01-01

    The Arsenic Water Technology Partnership program is a multi-year program funded by a congressional appropriation through the Department of Energy. The program is designed to move technologies from benchscale tests to field demonstrations. It will enable water utilities, particularly those serving small, rural communities and Indian tribes, to implement the most cost-effective solutions to their arsenic treatment needs. As part of the Arsenic Water Technology Partnership program, Sandia National Laboratories is carrying out field demonstration testing of innovative technologies that have the potential to substantially reduce the costs associated with arsenic removal from drinking water. The scope for this work includes: (1) Selection of sites and identification of technologies for pilot demonstrations; (2) Laboratory studies to develop rapid small-scale test methods; and (3) Pilot-scale studies at community sites involving side-by-side tests of innovative technologies. The goal of site selection is to identify sites that allow examination of treatment processes and systems under conditions that are relevant to different geochemical settings throughout the country. A number of candidate sites have been identified through reviews of groundwater quality databases, conference proceedings and discussions with state and local officials. These include sites in New Mexico, Arizona, Colorado, Oklahoma, Michigan, and California. Candidate technologies for the pilot tests are being reviewed through vendor forums, proof-of-principle benchscale studies managed by the American Water Works Association Research Foundation (AwwaRF) and the WERC design contest. The review considers as many potential technologies as possible and screens out unsuitable ones by considering data from past performance testing, expected costs, complexity of operation and maturity of the technology. The pilot test configurations will depend on the site-specific conditions such as access, power availability

  5. Technology for NPP decantate treatment realized at Kola NPP

    International Nuclear Information System (INIS)

    Stakhiv, Michael; Avezniyazov, Slava; Savkin, Alexander; Fedorov, Denis; Dmitriev, Sergei; Kornev, Vladimir

    2007-01-01

    At Moscow SIA 'Radon' jointly with JSC 'Alliance Gamma', the technology for NPP Decantate Treatment was developed, tested and realized at Kola NPP. This technology consists of dissolving the salt residue and subsequent treatment by ozonization, separation of the deposits formed from ozonization and selective cleaning by ferro-cyanide sorbents. The nonactive salt solution goes to an industrial waste disposal site or a repository specially developed at NPP sites for 'exempt waste' products by IAEA classification. This technology was realized at Kola NPP in December 2006 year. At this time more than 1000 m 3 of decantates log time stored are treated. It allows solving very old problem to empty decantates' tanks at NPPs in environmentally safe manner and with high volume reduction factor. (authors)

  6. An Exploration of Mercury Soils Treatment Technologies for the Y-12 Plant - 13217

    Energy Technology Data Exchange (ETDEWEB)

    Wrapp, John [UCOR, P.O. Box 4699, Oak Ridge, TN 37831 (United States); Julius, Jonathon [DOE Oak Ridge (United States); Browning, Debbie [Strata-G, LLC, 2027 Castaic Lane, Knoxville, TN, 37932 (United States); Kane, Michael [RSI, P.O. Box 4699, Oak Ridge, TN 37831 (United States); Whaley, Katherine [RSI, P.O. Box 4699, Oak Ridge, TN 37831 (United States); Estes, Chuck [EnergySolutions, P.O. Box 4699, Oak Ridge, TN 37831 (United States); Witzeman, John [RSI, P.O. Box 4699, Oak Ridge, TN, 37831 (United States)

    2013-07-01

    There are a number of areas at the Y-12 National Security Complex (Y-12) that have been contaminated with mercury due to historical mercury use and storage. Remediation of these areas is expected to generate large volumes of waste that are Resource Conservation and Recovery Act (RCRA) characteristically hazardous. These soils will require treatment to meet RCRA Land Disposal Restrictions (LDR) prior to disposal. URS - CH2M Oak Ridge LLC (UCOR) performed a feasibility assessment to evaluate on-site and off-site options for the treatment and disposal of mercury-contaminated soil from the Y-12 Site. The focus of the feasibility assessment was on treatment for disposal at the Environmental Management Waste Management Facility (EMWMF) located on the Oak Ridge Reservation. A two-phase approach was used in the evaluation process of treatment technologies. Phase 1 involved the selection of three vendors to perform treatability studies using their stabilization treatment technology on actual Y-12 soil. Phase II involved a team of waste management specialists performing an in-depth literature review of all available treatment technologies for treating mercury contaminated soil using the following evaluation criteria: effectiveness, feasibility of implementation, and cost. The result of the treatability study and the literature review revealed several viable on-site and off-site treatment options. This paper presents the methodology used by the team in the evaluation of technologies especially as related to EMWMF waste acceptance criteria, the results of the physical treatability studies, and a regulatory analysis for obtaining regulator approval for the treatment/disposal at the EMWMF. (authors)

  7. An Exploration of Mercury Soils Treatment Technologies for the Y-12 Plant - 13217

    International Nuclear Information System (INIS)

    Wrapp, John; Julius, Jonathon; Browning, Debbie; Kane, Michael; Whaley, Katherine; Estes, Chuck; Witzeman, John

    2013-01-01

    There are a number of areas at the Y-12 National Security Complex (Y-12) that have been contaminated with mercury due to historical mercury use and storage. Remediation of these areas is expected to generate large volumes of waste that are Resource Conservation and Recovery Act (RCRA) characteristically hazardous. These soils will require treatment to meet RCRA Land Disposal Restrictions (LDR) prior to disposal. URS - CH2M Oak Ridge LLC (UCOR) performed a feasibility assessment to evaluate on-site and off-site options for the treatment and disposal of mercury-contaminated soil from the Y-12 Site. The focus of the feasibility assessment was on treatment for disposal at the Environmental Management Waste Management Facility (EMWMF) located on the Oak Ridge Reservation. A two-phase approach was used in the evaluation process of treatment technologies. Phase 1 involved the selection of three vendors to perform treatability studies using their stabilization treatment technology on actual Y-12 soil. Phase II involved a team of waste management specialists performing an in-depth literature review of all available treatment technologies for treating mercury contaminated soil using the following evaluation criteria: effectiveness, feasibility of implementation, and cost. The result of the treatability study and the literature review revealed several viable on-site and off-site treatment options. This paper presents the methodology used by the team in the evaluation of technologies especially as related to EMWMF waste acceptance criteria, the results of the physical treatability studies, and a regulatory analysis for obtaining regulator approval for the treatment/disposal at the EMWMF. (authors)

  8. Application of Multimodality Imaging Fusion Technology in Diagnosis and Treatment of Malignant Tumors under the Precision Medicine Plan.

    Science.gov (United States)

    Wang, Shun-Yi; Chen, Xian-Xia; Li, Yi; Zhang, Yu-Ying

    2016-12-20

    The arrival of precision medicine plan brings new opportunities and challenges for patients undergoing precision diagnosis and treatment of malignant tumors. With the development of medical imaging, information on different modality imaging can be integrated and comprehensively analyzed by imaging fusion system. This review aimed to update the application of multimodality imaging fusion technology in the precise diagnosis and treatment of malignant tumors under the precision medicine plan. We introduced several multimodality imaging fusion technologies and their application to the diagnosis and treatment of malignant tumors in clinical practice. The data cited in this review were obtained mainly from the PubMed database from 1996 to 2016, using the keywords of "precision medicine", "fusion imaging", "multimodality", and "tumor diagnosis and treatment". Original articles, clinical practice, reviews, and other relevant literatures published in English were reviewed. Papers focusing on precision medicine, fusion imaging, multimodality, and tumor diagnosis and treatment were selected. Duplicated papers were excluded. Multimodality imaging fusion technology plays an important role in tumor diagnosis and treatment under the precision medicine plan, such as accurate location, qualitative diagnosis, tumor staging, treatment plan design, and real-time intraoperative monitoring. Multimodality imaging fusion systems could provide more imaging information of tumors from different dimensions and angles, thereby offing strong technical support for the implementation of precision oncology. Under the precision medicine plan, personalized treatment of tumors is a distinct possibility. We believe that multimodality imaging fusion technology will find an increasingly wide application in clinical practice.

  9. Integrated Thermal Treatment Systems study: US Department of Energy Internal Review Panel report

    International Nuclear Information System (INIS)

    Cudahy, J.; Escarda, T.; Gimpel, R.

    1995-04-01

    The U.S. Department of Energy's (DOE) Office of Technology Development (OTD) commissioned two studies to uniformly evaluate nineteen thermal treatment technologies. These studies were called the Integrated Thermal Treatment System (ITTS) Phase I and Phase II. With the advice and guidance of the DOE Office of Environmental Management's (EM's) Mixed Waste Focus Group, OTD formed an ITTS Internal Review Panel, composed of scientists and engineers from throughout the DOE complex, the U.S. Environmental Protection Agency (EPA), the California EPA, and private experts. The Panel met from November 15-18, 1994, to review and comment on the ITTS studies, to make recommendations on the most promising thermal treatment systems for DOE mixed low level wastes (MLLW), and to make recommendations on research and development necessary to prove the performance of the technologies on MLLW

  10. TECHNOLOGICAL PROCESS ASSESSMENT OF THE DRINKING WATER TREATMENT AT TARGU-MURES WATER TREATMENT PLANT

    Directory of Open Access Journals (Sweden)

    CORNELIA DIANA HERTIA

    2011-03-01

    Full Text Available This paper intends to assess the technological process of obtaining drinking water at Targu-Mures water treatment plant. The assessment was performed before changing the technological process and four months were chosen to be analized during 2008: January, April, July and October for its efficiency analysis on treatment steps. Mures River is the water source for the water treatment plant, being characterized by unsteady flow and quality parameters with possible important variability in a very short period of time. The treatment technological process is the classic one, represented by coagulation, sedimentation, filtration and disinfection, but also prechlorination was constantly applied as additional treatment during 2008. Results showed that for the measured parameters, raw water at the water treatment plant fits into class A3 for surface waters, framing dictated by the bacterial load. The treatment processes efficiency is based on the performance calculation for sedimentation, filtration, global and for disinfection, a better conformation degree of technological steps standing out in January in comparison to the other three analyzed months. A variable non-compliance of turbidity and residual chlorine levels in the disinfected water was observed constantly. Previous treatment steps managed to maintain a low level of oxidisability, chlorine consumption and residual chlorine levels being also low. 12% samples were found inconsistent with the national legislation in terms of bacteriological quality. Measures for the water treatment plant retechnologization are taken primarily for hyperchlorination elimination, which currently constitutes a discomfort factor (taste, smell, and a generating factor of chlorination by-products.

  11. Educational Technology: A Review of the Integration, Resources, and Effectiveness of Technology in K-12 Classrooms

    Directory of Open Access Journals (Sweden)

    Adolph Delgado

    2015-09-01

    Full Text Available There is no questioning that the way people live, interact, communicate, and conduct business is undergoing a profound, rapid change. This change is often referred to as the “digital revolution,” which is the advancement of technology from analog, electronic and mechanical tools to the digital tools available today. Moreover, technology has begun to change education, affecting how students acquire the skill sets needed to prepare for college and a career and how educators integrate digital technological instructional strategies to teach. Numerous studies have been published discussing the barriers of integrating technology, the estimated amount of investment that is needed in order to fully support educational technology, and, of course, the effectiveness of technology in the classroom. As such, this article presents a critical review of the transitions that technology integration has made over the years; the amount of resources and funding that has been allocated to immerse school with technology; and the conflicting results presented on effectiveness of using is technology in education. Through synthesis of selected themes, we found a plethora of technological instructional strategies being used to integrate technology into K-12 classrooms. Also, though there have been large investments made to integrate technology into K-12 classrooms to equip students with the skills needed to prepare for college and a career, the practical use of this investment has not been impressive. Lastly, several meta-analyses showed promising results of effectiveness of technology in the classroom. However, several inherent methodological and study design issues dampen the amount of variance that technology accounts for.

  12. Technology, applications and modelling of ohmic heating: a review.

    Science.gov (United States)

    Varghese, K Shiby; Pandey, M C; Radhakrishna, K; Bawa, A S

    2014-10-01

    Ohmic heating or Joule heating has immense potential for achieving rapid and uniform heating in foods, providing microbiologically safe and high quality foods. This review discusses the technology behind ohmic heating, the current applications and thermal modeling of the process. The success of ohmic heating depends on the rate of heat generation in the system, the electrical conductivity of the food, electrical field strength, residence time and the method by which the food flows through the system. Ohmic heating is appropriate for processing of particulate and protein rich foods. A vast amount of work is still necessary to understand food properties in order to refine system design and maximize performance of this technology in the field of packaged foods and space food product development. Various economic studies will also play an important role in understanding the overall cost and viability of commercial application of this technology in food processing. Some of the demerits of the technology are also discussed.

  13. A Review of Gamification in Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Prabawa, H. W.

    2017-02-01

    This paper review 10 papers that relating to gamification adoption in developing technological pedagogical content knowledge (TPACK) framework. Technological developments lately led to the trend of increased use of ICT in the learning process, one of which is gamification. Gamification is the concept of applying game mechanics and game design techniques to engage and motivate people to achieve their goals. Gamification in education as an intersection of learning and fun. The problem is that not all game’s attributes suitable for use in presents a teaching material. TPACK is a framework for the teacher that described a complex interaction among three bodies of knowledge : content, pedagogy and technology. TPACK engagement has an impact on the teacher mastery in dimension of teaching material content, in addition to improve teachers skill in developing technology in classroom learning.

  14. Ultra-low-head hydroelectric technology: A review

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Daqing; Deng, Zhiqun (Daniel)

    2017-10-01

    In recent years, distributed renewable energy-generation technologies, such as wind and solar, have developed rapidly. Nevertheless, the utilization of ultra-low-head (ULH) water energy (i.e., situations where the hydraulic head is less than 3 m or the water flow is more than 0.5 m/s with zero head) has received little attention. We believe that, through technological innovations and cost reductions, ULH hydropower has the potential to become an attractive, renewable, and sustainable resource. This paper investigates potential sites for ULH energy resources, the selection of relevant turbines and generators, simplification of civil works, and project costs. This review introduces the current achievements on ULH hydroelectric technology to stimulate discussions and participation of stakeholders to develop related technologies for further expanding its utilization as an important form of renewable energy.

  15. A review of virus removal in wastewater treatment pond systems.

    Science.gov (United States)

    Verbyla, Matthew E; Mihelcic, James R

    2015-03-15

    Wastewater treatment ponds (lagoons) are one of the most common types of technologies used for wastewater management worldwide, especially in small cities and towns. They are particularly well-suited for systems where the effluent is reused for irrigation. However, the efficiency of virus removal in wastewater treatment pond systems is not very well understood. The main objective of this paper is to critically review the major findings related to virus removal in wastewater treatment pond systems and to statistically analyze results reported in the literature from field studies on virus removal in these systems. A comprehensive analysis of virus removal reported in the literature from 71 different wastewater treatment pond systems reveals only a weak to moderate correlation of virus removal with theoretical hydraulic retention time. On average, one log10 reduction of viruses was achieved for every 14.5-20.9 days of retention, but the 95th percentile value of the data analyzed was 54 days. The mechanisms responsible for virus removal in wastewater treatment ponds were also reviewed. One recent finding is that sedimentation may not be a significant virus removal mechanism in some wastewater ponds. Recent research has also revealed that direct and indirect sunlight-mediated mechanisms are not only dependent on pond water chemistry and optics, but also on the characteristics of the virus and its genome. MS2 coliphage is considered to be the best surrogate for studying sunlight disinfection in ponds. The interaction of viruses with particles, with other microorganisms, and with macroinvertebrates in wastewater treatment ponds has not been extensively studied. It is also unclear whether virus internalization by higher trophic-level organisms has a protective or a detrimental effect on virus viability and transport in pond systems. Similarly, the impact of virus-particle associations on sunlight disinfection in ponds is not well understood. Future research should focus on

  16. Biological control and management of the detoxication wastewater treatment technologies

    Directory of Open Access Journals (Sweden)

    Topalova Yana

    2007-01-01

    Full Text Available Detoxication technologies require the combination of theoretical and practical knowledge of xenobiotic biodegradation, wastewater treatment technologies, and management rules. The purpose of this complicated combination is to propose specialized strategies for detoxication, based on lab- and pilot-scale modeling. These strategies include preliminary created algorithms for preventing the risk of water pollution and sediments. The technologies and algorithms are essentially important outcome, applied in the textile, pharmaceutical, cosmetic, woodtreating, and oiltreating industries. In this paper four rehabilitation technologies for pretreatment of water contaminated by pentachlorophenol (PCP have been developed in the frame of the European and Bulgarian National projects. Emphasize is put on the biological systems and their potential of detoxication management. The light and transmission electron microscopy of the reconstructed activated sludges the microbial, kinetic and enzymological indicators are presented and approved as critical points in the biocontrol.

  17. Overview of established and emerging treatment technologies for polycyclic aromatic hydrocarbons at wood preserving facilities

    International Nuclear Information System (INIS)

    Shearon, M.D.

    1992-01-01

    The contamination of soil and groundwater by polycyclic aromatic hydrocarbons (PAHs) is common to wood preserving facilities and manufactured gas plants. Since the inception of RCRA and CERCLA, much attention has been focused upon the remediation of both active and defunct wood preserving facilities. The experiences gleaned from the use of proven technologies, and more importantly, the lessons being learned in the trials of emerging technologies on creosote-derived PAH clean-ups at wood preserving sites, should have direct bearing on the clean-up of similar contaminants at MGP sites. In this paper, a review of several remedial actions using waste removal/disposal, on-site incineration, and bioremediation will be presented. Additionally, emerging technologies for the treatment of PAH-contaminated soil and water will be reviewed. Lastly, recent information on risk assessment results for creosote sites and treated PAH waste will be discussed

  18. Change Management in Information Technology - A Literature Review

    Directory of Open Access Journals (Sweden)

    Mahadi Hasan Miraz

    2016-03-01

    Full Text Available The purpose of this paper is to present the state of the art of research in Information Technology (IT in Change Management (CM. Initial studies indicate that investments into CM in IT often do not add the predictable value, neither to the CM division himself nor to the association supported by the CM section. A basis for further study into this complex and inter disciplinary area is therefore needed. This literature review will contribute to this basis. Based on a Systematic Literature Review (SLR method, journal articles, with a focus on CM in IT were found. Relevant articles were organized in categories according to focus on Technology, IT layer, CM process and theory, research method applied and type of findings. Finally research gaps were identified. There seems to be a general belief in technology combinations as a way to speed up the rather slow IT diffusion process in CM. It is documented that current research into CM in IT has an unbalanced focus on few specific technologies, IT layers and CM processes, and that further research should focus more on the IT implementation process and use. Knowledge from application and use could be fed back into (and strengthen conceptualization and progress, thereby adding more value to CM. Only the search engine Scopus is used. This is the first review paper focusing on CM in general in IT, giving an overview of the area and delivering a basis for further research.

  19. Mobile technology-based interventions for adult users of alcohol: A systematic review of the literature.

    Science.gov (United States)

    Fowler, Lauren A; Holt, Sidney L; Joshi, Deepti

    2016-11-01

    Worldwide, 16% of people aged 15 and older engage in harmful use of alcohol. Harmful alcohol use leads to a host of preventable negative social and health consequences. Mobile technology-based interventions provide a particularly promising avenue for the widespread and cost-effective delivery of treatment that is accessible, affordable, individualized, and destigmatized to both alcohol-dependent and nondependent individuals. The present review sought to summarize the current literature on mobile technology-based interventions among adult users of alcohol and determine the efficacy of such interventions. Five databases were searched in December 2015 (Jan. 2004-Dec. 2015). Inclusion criteria were: participants aged 18 or older, interventions delivered through mobile-technology, and outcome measurement of alcohol reduction/cessation. Eight studies met inclusion criteria. The majority of the studies reviewed found positive effects of the intervention, even though the interventions themselves varied in design, length, dosage, and target population, and were pilot or preliminary in nature. Findings from this review highlight the promising, yet preliminary state of research in this area. Studies with adequate power and valid design are necessary to evaluate the potential of mobile technology-based interventions on long-term alcohol behavior outcomes. Furthermore, future research should elucidate what the most effective length of time is for a mobile technology-based intervention, how often individuals should receive messages for maximum benefit, and determine the comparative effectiveness of mobile technology interventions with other efficacious interventions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. A review of learning rates for electricity supply technologies

    International Nuclear Information System (INIS)

    Rubin, Edward S.; Azevedo, Inês M.L.; Jaramillo, Paulina; Yeh, Sonia

    2015-01-01

    A variety of mathematical models have been proposed to characterize and quantify the dependency of electricity supply technology costs on various drivers of technological change. The most prevalent model form, called a learning curve, or experience curve, is a log-linear equation relating the unit cost of a technology to its cumulative installed capacity or electricity generated. This one-factor model is also the most common method used to represent endogenous technical change in large-scale energy-economic models that inform energy planning and policy analysis. A characteristic parameter is the “learning rate,” defined as the fractional reduction in cost for each doubling of cumulative production or capacity. In this paper, a literature review of the learning rates reported for 11 power generation technologies employing an array of fossil fuels, nuclear, and renewable energy sources is presented. The review also includes multi-factor models proposed for some energy technologies, especially two-factor models relating cost to cumulative expenditures for research and development (R&D) as well as the cumulative installed capacity or electricity production of a technology. For all technologies studied, we found substantial variability (as much as an order of magnitude) in reported learning rates across different studies. Such variability is not readily explained by systematic differences in the time intervals, geographic regions, choice of independent variable, or other parameters of each study. This uncertainty in learning rates, together with other limitations of current learning curve formulations, suggests the need for much more careful and systematic examination of the influence of how different factors and assumptions affect policy-relevant outcomes related to the future choice and cost of electricity supply and other energy technologies. - Highlights: • We review models explaining the cost of 11 electricity supply technologies. • The most prevalent model

  1. REVIEW OF ENERGY-SAVING TECHNOLOGIES IN MODERN HYDRAULIC DRIVES

    Directory of Open Access Journals (Sweden)

    Mykola Karpenko

    2017-12-01

    Full Text Available This paper focuses on review of modern energy­saving technologies in hydraulic drives. Described main areas of energy conservation in hydraulic drive (which in turn are divided into many under the directions and was established the popularity of them. Reviewed the comparative analysis of efficiency application of various strategies for energy saving in a hydraulic drive. Based on the review for further research a combined method of real­time control systems with energy­saving algorithms and regeneration unit – selected for maxing efficiency in hydraulic drive. Scientific papers (40 papers, what introduced in review, is not older than 15 years in the databases “Sciencedirect” and “Scopus”.

  2. Technology in precision viticulture: a state of the art review

    Directory of Open Access Journals (Sweden)

    Matese A

    2015-05-01

    Full Text Available Alessandro Matese,1 Salvatore Filippo Di Gennaro1,2 1Institute of Biometeorology, National Research Council (IBIMET-CNR, Florence, Italy; 2Department of Agricultural, Food and Environmental Sciences, University of Perugia, Perugia, Italy Abstract: Precision viticulture aims to maximize the oenological potential of vineyards. This is especially true in regions where the high quality standards of wine production justify the adoption of site-specific management practices to simultaneously increase both quality and yield. The introduction of new technologies for supporting vineyard management allows the efficiency and quality of production to be improved and, at the same time, reduces the environmental impact. The rapid evolution of information communication technologies and geographical science offers enormous potential for the development of optimized solutions for distributed information for precision viticulture. Recent technological developments have allowed useful tools to be elaborated that help in the monitoring and control of many aspects of vine growth. Precision viticulture thus seeks to exploit the widest range of available observations to describe the vineyard spatial variability with high resolution, and provide recommendations to improve management efficiency in terms of quality, production, and sustainability. This review presents a brief outline of state of the art of technologies in precision viticulture. It is divided in two sections, the first focusing on monitoring technologies such as geolocating and remote and proximal sensing; the second focuses on variable-rate technologies and the new agricultural robots. Keywords: remote sensing, proximal sensing, variable-rate technology, robot 

  3. Physician communication via Internet-enabled technology: A systematic review.

    Science.gov (United States)

    Barr, Neil G; Randall, Glen E; Archer, Norman P; Musson, David M

    2017-10-01

    The use of Internet-enabled technology (information and communication technology such as smartphone applications) may enrich information exchange among providers and, consequently, improve health care delivery. The purpose of this systematic review was to gain a greater understanding of the role that Internet-enabled technology plays in enhancing communication among physicians. Studies were identified through a search in three electronic platforms: the Association for Computing Machinery Digital Library, ProQuest, and Web of Science. The search identified 5140 articles; of these, 21 met all inclusion criteria. In general, physicians were satisfied with Internet-enabled technology, but consensus was lacking regarding whether Internet-enabled technology improved efficiency or made a difference to clinical decision-making. Internet-enabled technology can play an important role in enhancing communication among physicians, but the extent of that benefit is influenced by (1) the impact of Internet-enabled technology on existing work practices, (2) the availability of adequate resources, and (3) the nature of institutional elements, such as privacy legislation.

  4. Technology-Facilitated Diagnosis and Treatment of Individuals with Autism Spectrum Disorder: An Engineering Perspective

    Directory of Open Access Journals (Sweden)

    Xiongyi Liu

    2017-10-01

    Full Text Available The rapid development of computer and robotic technologies in the last decade is giving hope to perform earlier and more accurate diagnoses of the Autism Spectrum Disorder (ASD, and more effective, consistent, and cost-conscious treatment. Besides the reduced cost, the main benefit of using technology to facilitate treatment is that stimuli produced during each session of the treatment can be controlled, which not only guarantees consistency across different sessions, but also makes it possible to focus on a single phenomenon, which is difficult even for a trained professional to perform, and deliver the stimuli according to the treatment plan. In this article, we provide a comprehensive review of research on recent technology-facilitated diagnosis and treat of children and adults with ASD. Different from existing reviews on this topic, which predominantly concern clinical issues, we focus on the engineering perspective of autism studies. All technology facilitated systems used for autism studies can be modeled as human machine interactive systems where one or more participants would constitute as the human component, and a computer-based or a robotic-based system would be the machine component. Based on this model, we organize our review with the following questions: (1 What are presented to the participants in the studies and how are the content and delivery methods enabled by technologies? (2 How are the reactions/inputs collected from the participants in response to the stimuli in the studies? (3 Are the experimental procedure and programs presented to participants dynamically adjustable based on the responses from the participants, and if so, how? and (4 How are the programs assessed?

  5. Mercury emissions control technologies for mixed waste thermal treatment

    International Nuclear Information System (INIS)

    Chambers, A.; Knecht, M.; Soelberg, N.; Eaton, D.

    1997-01-01

    EPA has identified wet scrubbing at low mercury feedrates, as well as carbon adsorption via carbon injection into the offgas or via flow through fixed carbon beds, as control technologies that can be used to meet the proposed Maximum Achievable Control Technology (MACT) rule limit for mercury emissions from hazardous waste incinerators. DOE is currently funding demonstrations of gold amalgamation that may also control mercury to the desired levels. Performance data from a variety of sources was reviewed to determine ranges of achievable mercury control. Preliminary costs were estimated for using these technologies to control mercury emissions from mixed waste incineration. Mercury emissions control for mixed waste incineration may need to be more efficient than for incineration of other hazardous wastes because of higher mercury concentrations in some mixed waste streams. However, mercury control performance data for wet scrubbing and carbon adsorption is highly variable. More information is needed to demonstrate control efficiencies that are achievable under various design and operating conditions for wet scrubbing, carbon adsorption, and gold amalgamation technologies. Given certain assumptions made in this study, capital costs, operating costs, and lifecycle costs for carbon injection, carbon beds, and gold amalgamation generally vary for different assumed mercury feedrates and for different offgas flowrates. Assuming that these technologies can in fact provide the necessary mercury control performance, each of these technologies may be less costly than the others for certain mercury feedrates and the offgas flowrates

  6. Review of decontamination technologies for chemical counter-terrorism

    Energy Technology Data Exchange (ETDEWEB)

    Volchek, K.; Boudreau, L.; Hornof, M. [SAIC Canada, Ottawa, ON (Canada); Fingas, M.F.; Gamble, R.L. [Environment Canada, Ottawa, ON (Canada). Emergencies Science and Technology Div]|[Environment Canada, Ottawa, ON (Canada). River Road Environmental Technology Centre

    2004-07-01

    The two categories of chemical agents that could be used in acts of chemical terrorism are conventional chemical warfare agents and commercial toxic chemicals. Industrial chemicals are easier to access than warfare agents, and must therefore be considered when evaluating decontamination techniques. This study involved a search of public-domain documents to identify decontamination technologies including: physical/mechanical treatment or removal; chemical treatment; and, biological methods including natural degradation and attenuation. The technologies were analyzed with reference to their effectiveness for specific groups of chemical agents, state of development, availability and costs. Results indicate that there are many decontamination methods available, both developed and under development, that work effectively for most agents. The two most common decontamination methods are oxidation and alkali hydrolysis followed by dehalogenation. Technology limitations and gaps were also identified, suggesting a need for more research to further the development of promising processes. 31 refs., 2 tabs.

  7. A review on photovoltaic/thermal hybrid solar technology

    International Nuclear Information System (INIS)

    Chow, T.T.

    2010-01-01

    A significant amount of research and development work on the photovoltaic/thermal (PVT) technology has been done since the 1970s. Many innovative systems and products have been put forward and their quality evaluated by academics and professionals. A range of theoretical models has been introduced and their appropriateness validated by experimental data. Important design parameters are identified. Collaborations have been underway amongst institutions or countries, helping to sort out the suitable products and systems with the best marketing potential. This article gives a review of the trend of development of the technology, in particular the advancements in recent years and the future work required. (author)

  8. CSIR Division of Mining Technology annual review 1993/94

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The Division of Mining Technology of the CSIR (Council for Scientific and Industrial Research) works in partnership with the mining industry to solve problems threatening the health, safety and well-being of the workforce, and the productivity of mining operations through the development and implementation of knowledge and technology. The annual review describes the Division's research projects in the following field: rock engineering (for gold, platinum and coal mining); mining environment; occupational hygiene; surface environment; and mining equipment and systems (systems and equipment, orebody information, coal mining and causes of accidents). Details are also given of the Division's publications, research and consultancy services and information centre.

  9. Mixed and low-level waste treatment facility project. Volume 3, Waste treatment technologies (Draft)

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    The technology information provided in this report is only the first step toward the identification and selection of process systems that may be recommended for a proposed mixed and low-level waste treatment facility. More specific information on each technology will be required to conduct the system and equipment tradeoff studies that will follow these preengineering studies. For example, capacity, maintainability, reliability, cost, applicability to specific waste streams, and technology availability must be further defined. This report does not currently contain all needed information; however, all major technologies considered to be potentially applicable to the treatment of mixed and low-level waste are identified and described herein. Future reports will seek to improve the depth of information on technologies.

  10. Convergence of anatomy, technology, and therapeutics: a review of laser-assisted drug delivers.

    Science.gov (United States)

    Brauer, Jeremy A; Krakowski, Andrew C; Bloom, Bradley S; Nguyen, Tuyet A; Geronemus, Roy G

    2014-12-01

    This is a very exciting time in cutaneous laser surgery with an ever-expanding therapeutic armamentarium and an increased sophistication of available technology. These recent trends have allowed for both a rapid development of interest and exploration of laser-assisted drug delivery and its potential applications. We review the current literature on anatomy, technology, and therapeutics as it relates to laser-assisted drug delivery. The focus of our review is on two areas of interest that have received much attention to date - photodynamic therapy in the treatment of actinic keratoses and nonmelanoma skin cancers as well as the treatment of scarring. We will also discuss potential complications of existing modalities used independently and in laser-assisted drug delivery and conclude with future indications for this burgeoning therapeutic methodology.

  11. Environmental assessment of digestate treatment technologies using LCA methodology.

    Science.gov (United States)

    Vázquez-Rowe, Ian; Golkowska, Katarzyna; Lebuf, Viooltje; Vaneeckhaute, Céline; Michels, Evi; Meers, Erik; Benetto, Enrico; Koster, Daniel

    2015-09-01

    The production of biogas from energy crops, organic waste and manure has augmented considerably the amounts of digestate available in Flanders. This has pushed authorities to steadily introduce legislative changes to promote its use as a fertilising agent. There is limited arable land in Flanders, which entails that digestate has to compete with animal manure to be spread. This forces many anaerobic digestion plants to further treat digestate in such a way that it can either be exported or the nitrogen be removed. Nevertheless, the environmental impact of these treatment options is still widely unknown, as well as the influence of these impacts on the sustainability of Flemish anaerobic digestion plants in comparison to other regions where spreading of raw digestate is allowed. Despite important economic aspects that must be considered, the use of Life Cycle Assessment (LCA) is suggested in this study to identify the environmental impacts of spreading digestate directly as compared to four different treatment technologies. Results suggest relevant environmental gains when the digestate mix is treated using the examined conversion technologies prior to spreading, although important trade-offs between impact categories were observed and discussed. The promising results of digestate conversion technologies suggest that further LCA analyses should be performed to delve into, for instance, the appropriateness to shift to nutrient recovery technologies rather than digestate conversion treatments. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Sodium-bearing Waste Treatment Technology Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Charles M. Barnes; Arlin L. Olson; Dean D. Taylor

    2004-05-01

    Sodium-bearing waste (SBW) disposition is one of the U.S. Department of Energy (DOE) Idaho Operation Office’s (NE-ID) and State of Idaho’s top priorities at the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL has been working over the past several years to identify a treatment technology that meets NE-ID and regulatory treatment requirements, including consideration of stakeholder input. Many studies, including the High-Level Waste and Facilities Disposition Environmental Impact Statement (EIS), have resulted in the identification of five treatment alternatives that form a short list of perhaps the most appropriate technologies for the DOE to select from. The alternatives are (a) calcination with maximum achievable control technology (MACT) upgrade, (b) steam reforming, (c) cesium ion exchange (CsIX) with immobilization, (d) direct evaporation, and (e) vitrification. Each alternative has undergone some degree of applied technical development and preliminary process design over the past four years. This report presents a summary of the applied technology and process design activities performed through February 2004. The SBW issue and the five alternatives are described in Sections 2 and 3, respectively. Details of preliminary process design activities for three of the alternatives (steam reforming, CsIX, and direct evaporation) are presented in three appendices. A recent feasibility study provides the details for calcination. There have been no recent activities performed with regard to vitrification; that section summarizes and references previous work.

  13. Selection criteria for wastewater treatment technologies to protect drinking water.

    Science.gov (United States)

    von Sperling, M

    2000-01-01

    The protection of water bodies used as sources for drinking water is intimately linked to the adoption of adequate technologies for the treatment of the wastewater generated in the catchment area. The paper presents a general overview of the main technologies used for the treatment of domestic sewage, with a special emphasis on developing countries, and focussing on the main parameters of interest, such as BOD, coliforms and nutrients. A series of tables, figures and charts that can be used for the preliminary selection of treatment technologies is presented. The systems analysed are: stabilisation ponds, activated sludge, trickling filters, anaerobic systems and land disposal. Within each system, the main process variants are covered. Two summary tables are presented, one for quantitative analysis, including easily usable information based on per capita values (US$/cap, Watts/cap, m2 area/cap, m3 sludge/cap), and another for a qualitative comparison among the technologies, based on a one-to-five-star scoring system. The recent trend in tropical countries in the use of UASB (Upflow Anaerobic Sludge Blanket) reactors is also discussed.

  14. The controversy of sports technology: a systematic review.

    Science.gov (United States)

    Dyer, Bryce

    2015-01-01

    Changes or introductions of technology or equipment can affect how a sport is played or influence its performances. This article conducted a systematic review of peer-reviewed literature to identify any case studies of controversial events surrounding the implementation or use of sports technology. 56 articles were identified that highlighted 31 different case studies found over a three decade time period. Thematic analysis revealed six distinctive themes when reviewing the articles. Whilst the sport of golf had the highest number of case studies, it was found that a significant level of attention had been recorded in the cases of Oscar Pistorius use of prosthetic legs in athletics and the use of full length swimsuits in swimming. The trend surrounding the number of articles was shown to be initially intermittent but saw a peak period from 2008 to 2010. However, the frequency of such articles since this peak has been more consistent. It is proposed that long periods of time without intervention or resolution by a governing body often increases the peer-reviewed attention paid to such cases in examples such as those identified in this systematic review.

  15. Operation technology of air treatment system in nuclear facilities

    CERN Document Server

    Chun, Y B; Hwong, Y H; Lee, H K; Min, D K; Park, K J; Uom, S H; Yang, S Y

    2001-01-01

    Effective operation techniques were reviewed on the air treatment system to protect the personnel in nuclear facilities from the contamination of radio-active particles and to keep the environment clear. Nuclear air treatment system consisted of the ventilation and filtering system was characterized by some test. Measurement of air velocity of blowing/exhaust fan in the ventilation system, leak tests of HEPA filters in the filtering, and measurement of pressure difference between the areas defined by radiation level were conducted. The results acquired form the measurements were reflected directly for the operation of air treatment. In the abnormal state of virus parts of devices composted of the system, the repairing method, maintenance and performance test were also employed in operating effectively the air treatment system. These measuring results and techniques can be available to the operation of air treatment system of PIEF as well as the other nuclear facilities in KAERI.

  16. Review of design technology of control rod position indicators

    International Nuclear Information System (INIS)

    Yu, Je Yong; Huh, Hyung; Kim, Ji Ho; Kim, Jong In; Chang, Moon Hee

    1999-10-01

    An integral reactor SMART is under development at KAERI. The design characteristics of SMART are radically different from those employer in currently operating loop type water reactors in Korea. The objective of this report is to review the design technology of position indicator, and to study the various sensors which can be used in rod position indicator. Design criteria that rod position indicator should satisfy are also examined. Following position indicators are reviewed in this report. 1. Digital positioning indicator (DRPI), 2. Reed switch type position indicator (RSPT), 3. Choke sensor type position indicator, 4. Ultrasonic sensor type position indicator, 5. Comparison of each position indicator. (author)

  17. Mandibular overdentures: a review of treatment philosophy and prosthodontic maintenance.

    Science.gov (United States)

    Al-Zubeidi, Mohammed I; Payne, Alan G T

    2007-12-01

    Root overdentures and implant overdentures are two similar treatment options for the nearly-edentulous or edentulous mandible. The purpose of this literature review was to specifically compare their prosthodontic treatment philosophies and follow-up maintenance requirements. Critical comparison of these two prosthodontic treatment philosophies revealed that the foundation for overdentures which is provided by oral implants is more predictable than that provided by the roots of natural teeth. The two treatment modalities have both similarities and differences in their associated prosthodontic maintenance. The findings of this literature review suggest the future possibility that mandibular root overdentures may become obsolete as a treatment approach.

  18. ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

    Science.gov (United States)

    Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

    2018-06-13

    The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

  19. Treatment technology analysis for mixed waste containers and debris

    International Nuclear Information System (INIS)

    Gehrke, R.J.; Brown, C.H.; Langton, C.A.; Askew, N.M.; Kan, T.; Schwinkendorf, W.E.

    1994-03-01

    A team was assembled to develop technology needs and strategies for treatment of mixed waste debris and empty containers in the Department of Energy (DOE) complex, and to determine the advantages and disadvantages of applying the Debris and Empty Container Rules to these wastes. These rules issued by the Environmental Protection Agency (EPA) apply only to the hazardous component of mixed debris. Hazardous debris that is subjected to regulations under the Atomic Energy Act because of its radioactivity (i.e., mixed debris) is also subject to the debris treatment standards. The issue of treating debris per the Resource Conservation and Recovery Act (RCRA) at the same time or in conjunction with decontamination of the radioactive contamination was also addressed. Resolution of this issue requires policy development by DOE Headquarters of de minimis concentrations for radioactivity and release of material to Subtitle D landfills or into the commercial sector. The task team recommends that, since alternate treatment technologies (for the hazardous component) are Best Demonstrated Available Technology (BDAT): (1) funding should focus on demonstration, testing, and evaluation of BDAT on mixed debris, (2) funding should also consider verification of alternative treatments for the decontamination of radioactive debris, and (3) DOE should establish criteria for the recycle/reuse or disposal of treated and decontaminated mixed debris as municipal waste

  20. Hyperthyroidism: a review of the treatment options

    International Nuclear Information System (INIS)

    Chen Danyun; Jing Jin

    2007-01-01

    Hyperthyroidism is commonly treated with anti-thyroid medications, radioactive iodine, or surgery. Three kinds of treatments have their own advantages and disadvantages. Therefore, the treatment of hyperthyroidism is still controversial. With regard to the first choice, strategies vary among different countries. (authors)

  1. A Review of Technology-Based Youth and Family-Focused Interventions.

    Science.gov (United States)

    MacDonell, Kathleen Watson; Prinz, Ronald J

    2017-06-01

    In the past 10 years, mental and behavioral health has seen a proliferation of technology-based interventions in the form of online and other computer-delivered programs. This paper focuses on technology-based treatment and preventive interventions aimed at benefitting children and adolescents via either involving the parents and families, or only the youth. The review considered only technology-based interventions that had at least one published study with a randomized controlled trial design. Questions being addressed included: (1) What are the technology-based interventions in the mental/behavioral health area that have been systematically evaluated in published studies? (2) What are the common and unique characteristics of these interventions and their application with respect to sample characteristics, target problems, and technology characteristics (platforms, structures, elements, and communication formats)? and (3) Which intervention approaches and strategies have accrued the greatest evidence? The review identified 30 technology-based psychosocial interventions for children and families, 19 of which were parent or family-focused (32 studies) and 11 of which were youth-focused (in 13 studies). For the parent/family-focused interventions, greatest promise was found in those that addressed either youth behavioral problems or depressive/anxious symptoms, as well as more general bolstering of parenting efficacy. The youth-focused interventions showed some promise in reducing depressive/anxious symptoms. Advantages and disadvantages of the technology-based approaches were considered, and areas for future research and development were discussed.

  2. Opportunities for membrane technologies in the treatment of mining and mineral process streams and effluents

    International Nuclear Information System (INIS)

    Awadalla, F.T.; Kumar, A.

    1994-01-01

    The membrane separation technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis are suitable for treating many dilute streams and effluents generated in mining and mineral processing. Membrane technologies are capable of treating these dilute streams in order to produce clean permeate water for recycle and a concentrate that can potentially be used for valuable metals recovery. Membrane technologies can be utilized alone, or in combination with other techniques as a polishing step, in these separation processes. A review of potential applications of membranes for the treatment of different process streams and effluents for water recycling and pollution control is given here. Although membranes may not be optimum in all applications, these technologies are recognized in the mining sector for the many potential advantages they can provide. 59 refs

  3. Technology transfer for Ukrainian milk treatment: A case study

    International Nuclear Information System (INIS)

    Dunn, M.J.; Walker, J.S.

    1994-01-01

    As a result of the Chernobyl Nuclear Power Plant accident, radioactive fission products have contaminated the food chain in the Ukraine. The highest doses to humans are a result of cesium contamination in milk. The milk produced in the Ukraine contains radioactive cesium at levels up to 10 times the acceptance standards. Bradtec has developed and demonstrated technology for the US Department of Energy for the treatment of groundwater and effluent water. This technology has also been tested and demonstrated for the Ukrainian government for the purpose of treating contaminated milk. Bradtec, a small business offering specialized technologies in the field of environmental remediation and waste management, has successfully worked with a consortium of businesses, National Laboratories and DOE Headquarters staff to develop and implement a technology demonstration strategy which has led to the implementation of a series collaboration agreements with Ukrainian officials. This paper describes, in a case study approach, the path followed by Bradtec and its collaboration partners in successfully implementing a technology transfer strategy. Also presented is an update on new programs that can provide benefit to private sector companies as DOE seeks to assist the private sector in joint venture/technology transfer relationships with the NIS (New Independent States). This paper should be of interest to all businesses seeking to participate in business opportunities in the NIS

  4. Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

    2006-09-01

    The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

  5. Computer technology for self-management: a scoping review.

    Science.gov (United States)

    Jacelon, Cynthia S; Gibbs, Molly A; Ridgway, John Ve

    2016-05-01

    The purpose of this scoping review of literature is to explore the types of computer-based systems used for self-management of chronic disease, the goals and success of these systems, the value added by technology integration and the target audience for these systems. Technology is changing the way health care is provided and the way that individuals manage their health. Individuals with chronic diseases are now able to use computer-based systems to self-manage their health. These systems have the ability to remind users of daily activities, and to help them recognise when symptoms are worsening and intervention is indicated. However, there are many questions about the types of systems available, the goals of these systems and the success with which individuals with chronic illness are using them. This is a scoping review in which the Cumulative Index of Nursing and Allied Health Literature, PubMed and IEEE Xplore databases were searched. A total of 303 articles were reviewed, 89 articles were read in-depth and 30 were included in the scoping review. The Substitution, Augmentation, Modification, Redefinition model was used to evaluate the value added by the technology integration. Research on technology for self-management was conducted in 13 countries. Data analysis identified five kinds of platforms on which the systems were based, some systems were focused on a specific disease management processes, others were not. For individuals to effectively use systems to maintain maximum wellness, the systems must have a strong component of self-management and provide the user with meaningful information regarding their health states. Clinicians should choose systems for their clients based on the design, components and goals of the systems. © 2016 John Wiley & Sons Ltd.

  6. A review on Anticipated Breakthrough Technologies of 21st Century

    OpenAIRE

    Aithal P. S.; Shubhrajyotsna Aithal

    2016-01-01

    This review discuss strategic management of thirteen most anticipated possible technology breakthroughs of 21st century which are substantially affect the life style of living beings in the world like (1) Nanotechnology-based human life comfort, (2) High speed computation through optical computers, (3) Embedded Intelligence, (4) HIV Antivirus, (5) Pseudo Senses - Sensation of existence through virtual reality and through artificial environment, (6) Off Planet Production in micro-gravity, (7) ...

  7. A review of fusion breeder blanket technology, part 1

    International Nuclear Information System (INIS)

    Jackson, D.P.; Selander, W.N.; Townes, B.M.

    1985-01-01

    This report presents the results of a study of fusion breeder blanket technology. It reviews the role of the breeder blanket, the current understanding of the scientific and engineering bases of liquid metal and solid breeder blankets and the programs now underway internationally to resolve the uncertainities in current knowledge. In view of existing national expertise and experience, a solid breeder R and D program for Canada is recommended

  8. WHAT ARE USER PERSPECTIVES OF EXOSKELETON TECHNOLOGY? A LITERATURE REVIEW.

    Science.gov (United States)

    Hill, Deborah; Holloway, Catherine Sarah; Morgado Ramirez, Dafne Zuleima; Smitham, Peter; Pappas, Yannis

    2017-01-01

    Exoskeletons are electromechanical devices that are worn by a human operator to increase their physical performance. Several exoskeletons have been developed to restore functional movements, such as walking, for those with paralysis due to neurological impairment. However, existing exoskeletons have limitations with respect to affordability, size, weight, speed, and efficiency, which may reduce their functional application. Therefore, the aim of this scoping review is to collect and narratively synthesize the perspectives of users of exoskeleton technology. A systematic literature search was conducted across several healthcare related online databases. A total of 4,619 articles were identified, of which 51 were selected for full review. Only three studies were identified that met the inclusion criteria. Of these, one showed an incongruence between users' expectations and experiences of device use; another reported perspectives on potential rather than actual device use, ranking design features in order of perceived importance; and the other reported ratings of ease of device use in training. The heterogeneity of studies included within this review, leave the authors unable to suggest consensus as to user perspectives of exoskeleton technology. However, it is apparent that users are able to suggest priorities for exoskeleton design and that users' perspectives of exoskeleton technology might change in response to experience of use. The authors, therefore, suggest that exoskeleton design should be an iterative process, whereby user perspectives are sought, incorporated and refined by tangible experience, to ensure that devices developed are acceptable to and usable by the populations they seek to re-enable.

  9. [Jurisdictions on the reimbursement of new medical technologies by public health insurance: A systematic review].

    Science.gov (United States)

    Ex, Patricia; Felgner, Susanne; Henschke, Cornelia

    2018-04-01

    In Germany reimbursement for new medical technologies is often enforced before a social court. It is likely that these judicial decisions also affect the sickness funds' decisions on requests for reimbursement and thus patient access to new technologies in general. The aim of this study was to identify the technologies that have repeatedly generated court actions and whether these actions have been successful. The focus was on differences between sectors, technology groups and indications. Based on this, we analysed in a case study whether judicial decisions on the reimbursement of the same technologies vary across the years. Based on a systematic review, we identified judicial decisions of German social courts on new technologies for the years 2011 to 2016. The analysis included social court decisions on reimbursements for technologies used in the treatment of individual patients. 284 judicial decisions on new technologies were considered in the analysis. In one third of the cases, the sickness funds were required to reimburse the costs, with a higher percentage in inpatient than in outpatient care. Technologies used in treatment of diseases of the eyes and the ears were granted most frequently. In cases involving similar circumstances the social courts sometimes came to conflicting decisions; these decisions are, in part, contradictory to subsequent assessments by the Joint Federal Committee (G-BA). Decisions as to whether reimbursement for new technologies is granted or not do not appear to follow a systematic approach. In the context of the seemingly innovation-friendly policy in inpatient care, there is uncertainty with regard to the "generally accepted state of medical knowledge." It is problematic for both patients and their treating physicians that over a number of years legal proceedings are being initiated for technologies that have not been subjected to a systematic assessment of their benefit. Copyright © 2018. Published by Elsevier GmbH.

  10. Advances in poultry litter disposal technology--a review.

    Science.gov (United States)

    Kelleher, B P; Leahy, J J; Henihan, A M; O'Dwyer, T F; Sutton, D; Leahy, M J

    2002-05-01

    The land disposal of waste from the poultry industry and subsequent environmental implications has stimulated interest into cleaner and more useful disposal options. The review presented here details advances in the three main alternative disposal routes for poultry litter, specifically in the last decade. Results of experimental investigations into the optimisation of composting, anaerobic digestion and direct combustion are summarised. These technologies open up increased opportunities to market the energy and nutrients in poultry litter to agricultural and non-agricultural uses. Common problems experienced by the current technologies are the existence and fate of nitrogen as ammonia, pH and temperature levels, moisture content and the economics of alternative disposal methods. Further advancement of these technologies is currently receiving increased interest, both academically and commercially. However, significant financial incentives are required to attract the agricultural industry.

  11. Science and Technology Review April/May 2011

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, R J

    2011-03-03

    At Lawrence Livermore National Laboratory, the focus is on science and technology research to ensure the nation's security. That expertise is also applied to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight time a year to communicate, to a broad audience, the Laboratory's scientific and technological accomplishments in fulfilling its primary missions. The publication's goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. In this issue for April/May 2011, the features are 'Dealing with the Nonlinear Battlefield' and 'From Video to Knowledge.' Research highlights are 'Kinetic Models Predict Biofuel Efficiency,' Going Deep with MEGa-Rays' and 'Energy on Demand.'

  12. An assessment of off-gas treatment technologies for application to thermal treatment of Department of Energy wastes

    International Nuclear Information System (INIS)

    Dalton, J.D.; Gillins, R.L.; Harris, T.L.; Wollerman, A.L.

    1992-09-01

    The purpose of this report is to describe available air pollution control technologies for pollutants generated by thermal treatment of DOE wastes. A basic process for selecting air pollution control devices is summarized. Types of air pollutants generated by thermal treatment units are described, as well as the factors that influence the types and quantities of pollutants generated. This report also reviews applicable regulatory emission requirements. A listing of available and emerging air pollution control technologies and a brief introduction to the basic engineering principles involved in collecting each of the pollutants are presented. Section 7 of this report contains two types of evaluations for air pollution control devices. First, comparative evaluations of individual technologies are presented, based upon criteria generally relevant to DOE facilities. Using this evaluation system, the spray dryer absorber received the highest rating for acid-gas removal; high-efficiency particulate air (HEPA) filters received the highest rating for particulate removal; activated carbon adsorption received the highest rating for the removal of both toxic metals and residual hydrocarbons; and selective catalytic reduction received the highest rating for nitrogen oxide abatement. Also evaluated in Sect. 7 is the expected performance of different types of pollution control systems on two hypothetical waste streams. The waste streams were defined based upon typical DOE wastes and thermal treatment technologies. Section 8 presents conclusions for this report. Two appendixes are included with this report. The first appendix contains a brief description of all the technologies evaluated and the second lists of some of the vendors for each of the technologies that was evaluated

  13. A review of water treatment membrane nanotechnologies

    KAUST Repository

    Pendergast, MaryTheresa M.; Hoek, Eric M.V.

    2011-01-01

    readiness was based on known or anticipated material costs, scalability (for large scale water treatment applications), and compatibility with existing manufacturing infrastructure. Overall, bio-inspired membranes are farthest from commercial reality

  14. FY-2001 Accomplishments in Off-gas Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, Douglas William

    2001-09-01

    This report summarizes the efforts funded by the Tank Focus Area to investigate nitrogen oxide (NOx) destruction (a.k.a. deNOx) technologies and off-gas scrubber system designs. The primary deNOx technologies that were considered are staged combustion (a.k.a. NOx reburning), selective catalytic reduction, selective non-catalytic reduction, and steam reformation. After engineering studies and a team evaluation were completed, selective catalytic reduction and staged combustion were considered the most likely candidate technologies to be deployed in a sodium-bearing waste vitrification facility. The outcome of the team evaluation factored heavily in the establishing a baseline configuration for off-gas and secondary waste treatment systems.

  15. New technologies in the treatment of type 1 diabetes

    DEFF Research Database (Denmark)

    Schmidt, Signe

    2013-01-01

    Type 1 diabetes is a chronic condition characterized by insufficient production of insulin, a hormone needed for proper control of blood glucose levels. People with type 1 diabetes must monitor their blood glucose throughout the day using a glucose meter or a continuous glucose monitor, calculate...... how much insulin is needed to maintain normal blood glucose levels, and administer the insulin dose by pen injection or insulin pump infusion into the subcutaneous tissue. In recent years, several new technologies for the treatment of type 1 diabetes have been developed. This PhD thesis covers two...... studies of the effects of commercially available technologies--sensor-augmented pump therapy and automated insulin bolus calculators--when used in clinical practice. Both studies demonstrated that these technologies have the potential to improve diabetes care. In addition, two in-clinic studies related...

  16. Evidence-based treatment strategies for treatment-resistant bipolar depression: a systematic review

    NARCIS (Netherlands)

    Sienaert, P.; Lambrichts, L.; Dols, A.; De Fruyt, J.

    2013-01-01

    Objectives: Treatment resistance in bipolar depression is a common clinical problem that constitutes a major challenge for the treating clinician as there is a paucity of treatment options. The objective of this paper was to review the evidence for treatment options in treatment-resistant bipolar

  17. Systemic combination treatment for psoriasis: a review

    DEFF Research Database (Denmark)

    Jensen, Peter; Skov, Lone; Zachariae, Claus

    2010-01-01

    exist for the use of systemic combination therapy. Therefore, our aim was to review the current literature on systemic anti-psoriatic combination regimens. We searched PubMed and identified 98 papers describing 116 studies (23 randomized) reporting on the effect of various systemic combination...

  18. Development of electron beam flue gas treatment technology

    International Nuclear Information System (INIS)

    Tanaka, T.

    1995-01-01

    The electron beam flue gas treatment technology is expected to bring many advantages such as the simultaneous reduction of SO x and NO x emissions, a dry process without waste water, valuable fertilizer byproducts, etc. In order to verify the feasibility and performances of the process, a practical application test is carried out with a pilot plant which treats the actual flue gas from a coal-fired boiler. Results are presented. 4 figs., 2 tabs

  19. Counselling users of hearing technology: a comprehensive literature review.

    Science.gov (United States)

    Meibos, Alex; Muñoz, Karen; Schultz, Jared; Price, Tanner; Whicker, John J; Caballero, Ana; Graham, Laurel

    2017-12-01

    The purpose of this review is to determine the scope of peer-reviewed empirical research related to counselling in audiology with patients using hearing technology and to identify limitations and gaps to guide recommendations for future research. A rapid evidence assessment was used to identify relevant articles for the review. Eighteen articles met the inclusion criteria. Three themes were identified: (1) audiologist counselling perspectives, (2) counselling communication trends in practice and (3) audiologist experiences with professional training and reported patient outcomes. Findings revealed audiologists are more confident providing information than counselling that addresses adjustment aspects, and other communication gaps have been observed. There is limited research related to counselling in audiology. Audiologists continue to report a need for more training in counselling in their graduate programmes. Additional research is needed to determine effective ways to implement counselling in practice and to improve graduate student supervision for the development of counselling competencies and confidence in using skills in practice.

  20. X-231B technology demonstration for in situ treatment of contaminated soil: Technology evaluation and screening

    International Nuclear Information System (INIS)

    Siegrist, R.L.; Morris, M.I.; Donaldson, T.L.; Palumbo, A.V.; Herbes, S.E.; Jenkins, R.A.; Morrissey, C.M.; Harris, M.T.

    1993-08-01

    The Portsmouth Gaseous Diffusion Plant (Ports) is located approximately 70 miles south of Columbus in southern Ohio. Among the several waste management units on the facility, the X-231B unit consists of two adjacent oil biodegradation plots. The plots encompass ∼ 0.8 acres and were reportedly used from 1976 to 1983 for the treatment and disposal of waste oils and degreasing solvents, some containing uranium-235 and technetium-99. The X-231B unit is a regulated solid waste management unit (SWMU) under the Resource Conservation and Recovery Act (RCRA). The X-231B unit is also a designated SWMU located within Quadrant I of the site as defined in an ongoing RCRA Facilities Investigation and Corrective Measures Study (RFI/CMS). Before implementing one or more Technology Demonstration Project must be completed. The principal goal of this project was to elect and successfully demonstrate one ore more technologies for effective treatment of the contaminated soils associated with the X-231B unit at PORTS. The project was divided into two major phases. Phase 1 involved a technology evaluation and screening process. The second phase (i.e., Phase 2) was to involve field demonstration, testing and evaluation of the technology(s) selected during Phase 1. This report presents the methods, results, and conclusions of the technology evaluation and screening portion of the project

  1. Innovative technologies for the treatment of hazardous and mixed wastes

    International Nuclear Information System (INIS)

    Eyman, L.D.; Anderson, T.D.

    1988-01-01

    The treatment, storage, and disposal of hazardous and mixed wastes incur significant costs for Department of Energy (DOE) installations. These wastes must be managed under strict environmental controls and regulations to prevent the possibility of migration of hazardous materials to the biosphere. Through the Hazardous Waste Remedial Actions Program, the DOE is seeking to develop innovative ways of improving current treatment technologies to eliminate the hazardous components of wastes, reduce waste management costs, and minimize the volume requiring disposal as hazardous or mixed waste. Sponsored projects progress from research and development to field demonstration. Among the innovative technologies under development are supercritical water oxidation of hazardous chemicals, microwave-assisted destruction of chlorinated hydrocarbons, paramagnetic separation of metals from waste, detoxification and reclamation of waste acid, nitrate destruction through calcination, treatment/disposal of reactive metals, and methodologies for encapsulation. Technologies at a demonstration phase include detoxification of mixed waste sludge, microbial degradation of polychlorinated biphenyls in soil, and the remediation process for a hydrocarbon spill. 14 refs

  2. Current trends in endodontic practice: emergency treatments and technological armamentarium.

    Science.gov (United States)

    Lee, Michelle; Winkler, Johnathon; Hartwell, Gary; Stewart, Jeffrey; Caine, Rufus

    2009-01-01

    The current clinical practice of endodontics includes the utilization of a variety of new technological advances and materials. The last comprehensive survey that compared treatment modalities used in endodontic practices was conducted in 1990. The purpose of the current survey was to determine the frequency with which these new endodontic technologies and materials are being used in endodontic practices today. An e-mail questionnaire was sent to the 636 active diplomates of the American Board of Endodontics with current e-mail addresses. Two hundred thirty-two diplomates responded for a response rate of 35%. Calcium hydroxide was found to be the most frequently used intracanal medicament for all cases diagnosed with necrotic pulps. Ibuprofen was the most frequently prescribed medication for pain, and penicillin was the most frequently prescribed antibiotic when an active infection was present. Eighty-two percent of the respondents are still incorporating hand files in some fashion during the cleansing and shaping phase of treatment. Lateral condensation and continuous wave were the most common methods used for obturation. Digital radiography was reported as being used by 72.5% of the respondents, whereas 45.3% reported using the microscope greater than 75% of the patient treatment. Ultrasonics was used by 97.8% of the respondents. It appears from the results that new endodontic technology is currently being used in the endodontic offices of those who responded to the survey.

  3. The Use of Virtual Reality Technology in the Treatment of Anxiety and Other Psychiatric Disorders.

    Science.gov (United States)

    Maples-Keller, Jessica L; Bunnell, Brian E; Kim, Sae-Jin; Rothbaum, Barbara O

    After participating in this activity, learners should be better able to:• Evaluate the literature regarding the effectiveness of incorporating virtual reality (VR) in the treatment of psychiatric disorders• Assess the use of exposure-based intervention for anxiety disorders ABSTRACT: Virtual reality (VR) allows users to experience a sense of presence in a computer-generated, three-dimensional environment. Sensory information is delivered through a head-mounted display and specialized interface devices. These devices track head movements so that the movements and images change in a natural way with head motion, allowing for a sense of immersion. VR, which allows for controlled delivery of sensory stimulation via the therapist, is a convenient and cost-effective treatment. This review focuses on the available literature regarding the effectiveness of incorporating VR within the treatment of various psychiatric disorders, with particular attention to exposure-based intervention for anxiety disorders. A systematic literature search was conducted in order to identify studies implementing VR-based treatment for anxiety or other psychiatric disorders. This article reviews the history of the development of VR-based technology and its use within psychiatric treatment, the empirical evidence for VR-based treatment, and the benefits for using VR for psychiatric research and treatment. It also presents recommendations for how to incorporate VR into psychiatric care and discusses future directions for VR-based treatment and clinical research.

  4. Modified virtual reality technology for treatment of amblyopia.

    Science.gov (United States)

    Eastgate, R M; Griffiths, G D; Waddingham, P E; Moody, A D; Butler, T K H; Cobb, S V; Comaish, I F; Haworth, S M; Gregson, R M; Ash, I M; Brown, S M

    2006-03-01

    The conventional patching/occlusion treatment for amblyopia sometimes gives disappointing results for a number of reasons: it is unpopular, prolonged, frequently resulting in poor or noncompliance, and also disrupts fusion. The aim of this research was to develop a novel virtual-reality (VR)-based display system that facilitates the treatment of amblyopia with both eyes stimulated simultaneously. We have adopted a multidisciplinary approach, combining VR expertise with a team of ophthalmologists and orthoptists to develop the Interactive Binocular Treatment (I-BiT) system. This system incorporates adapted VR technology and specially written software providing interactive 2D and 3D games and videos to the patient via a stereo (binocular) display, and a control screen for the clinician. We developed a prototype research system designed for treatment of amblyopia in children. The result is a novel way to treat amblyopia, which allows binocular treatment. It is interactive, and as it is partially software based, can be adapted to suit the age/ability, and needs of the patient. This means that the treatment can be made captivating and enjoyable. Further research is on-going to determine the efficacy of this new modality in the treatment of amblyopia.

  5. Review of Irritable Bowel Syndrome Treatment

    Directory of Open Access Journals (Sweden)

    M.R Ghadir

    2012-05-01

    Full Text Available

    Background and Objectives: Irritable bowel syndrome is one of the most common functional gastrointestinal disorders striking 10-20% of the world population. Although most patients do not take medical assistance, this disease enforces significant cost on the patient and health systems and has negative effects on quality of life of the individual. After diagnosis ,treatment of this disease is the next step. Many pathways of treatment has been introduced and the efficacy of each other has been established in one way or another. The first step in the path of treatment is education and confidence of patients that might also be the most important step. Fiber diet, probiotic, anti-cholinergic and anti antispasmodics, laxatives, anti-diarrhea, the drugs affecting serotonin receptors, antidepressants and anti-anxiety, the chloride channel activator and non-drug methods such as cognitive-behavior therapy, hypnotherapy, acupuncture and herbal medicine each of which has been tested on irritable bowel syndrome and efficacy of each one has been indicated in one way or another. This paper tried to outline new treatments available in addition to categorization and discussion of various treatments for irritable bowel syndrome.

  6. Review of Irritable Bowel Syndrome Treatment

    Directory of Open Access Journals (Sweden)

    Ghadir M.R.

    2010-06-01

    Full Text Available Background and Objectives: Irritable bowel syndrome is one of the most common functional gastrointestinal disorders striking 10-20% of the world population. Although most patients do not take medical assistance, this disease enforces significant cost on the patient and health systems and has negative effects on quality of life of the individual. After diagnosis ,treatment of this disease is the next step. Many pathways of treatment has been introduced and the efficacy of each other has been established in one way or another. The first step in the path of treatment is education and confidence of patients that might also be the most important step. Fiber diet, probiotic, anti-cholinergic and anti antispasmodics, laxatives, anti-diarrhea, the drugs affecting serotonin receptors, antidepressants and anti-anxiety, the chloride channel activator and non-drug methods such as cognitive-behavior therapy, hypnotherapy, acupuncture and herbal medicine each of which has been tested on irritable bowel syndrome and efficacy of each one has been indicated in one way or another. This paper tried to outline new treatments available in addition to categorization and discussion of various treatments for irritable bowel syndrome.Keywords: Irritable Bowel Syndrome; Probiotics; Parasmpatholytics; Laxatives.

  7. Evaluation of appropriate technologies for grey water treatments and reuses.

    Science.gov (United States)

    Li, Fangyue; Wichmann, Knut; Otterpohl, Ralf

    2009-01-01

    As water is becoming a rare resource, the onsite reuse and recycling of grey water is practiced in many countries as a sustainable solution to reduce the overall urban water demand. However, the lack of appropriate water quality standards or guidelines has hampered the appropriate grey water reuses. Based on literature review, a non-potable urban grey water treatment and reuse scheme is proposed and the treatment alternatives for grey water reuse are evaluated according to the grey water characteristics, the proposed standards and economical feasibility.

  8. Decision making tools for selecting sustainable wastewater treatment technologies in Thailand

    Science.gov (United States)

    Wongburi, Praewa; Park, Jae K.

    2018-05-01

    Wastewater consists of valuable resources that could be recovered or reused. Still it is under threat because of ineffective wastewater management and systems. In Thailand, less than 25% of wastewater generated may be treated while then rest is inadequately treated and sent back directly into waterbodies or the environment. Furthermore, the technologies that have been applied may be inefficient and unsustainable. Efficiency, sustainability, and simplicity are important concepts when designing an appropriate wastewater treatment system in developing countries. The objectives of this study were to review and evaluate wastewater treatment technologies and propose a method to improve or select an appropriate technology. An expert system in Excel® program was developed to determine the best solution. Sensitivity analysis was applied to compare and assess uncertainty factors. Due to the different conditions of each area, the key factor of interest was varied. Furthermore, Robust Decision Making tool was applied to determine the best way to improve existing wastewater treatment facility and to choose the most appropriate wastewater treatment technology.

  9. Applicability of anaerobic membrane bioreactors for landfill leachate treatment: Review and opportunity

    Science.gov (United States)

    Abuabdou, Salahaldin M. A.; Bashir, Mohammed J. K.; Aun, Ng Choon; Sethupathi, Sumathi

    2018-04-01

    Sanitary landfilling is nowadays the most common way to eliminate municipal solid wastes (MSW). The resulted landfill leachate is a highly contaminated liquid. Even small quantities of this high-strength leachate can cause serious damage to surface and ground water receptors. Thus, these leachates must be appropriately treated before being discharged into the environment. In the last years, anaerobic membrane bioreactor (AnMBR) technology is being considered as a very attractive alternative for leachate treatment due to the significant advantages. In the last decade, many studies have been conducted in which various types of anaerobic reactors were used in combination with membranes. This paper is a review of the potential of anaerobic membrane bioreactor technology for municipal landfill leachate treatment. A critical review in AnMBR performance interesting landfill leachate in lab scale is also done. In addition, the review discusses the impact of the various factors on both biological and filtration performances of anaerobic membrane bioreactors.

  10. A review of emerging technologies for food refrigeration applications

    International Nuclear Information System (INIS)

    Tassou, S.A.; Lewis, J.S.; Ge, Y.T.; Hadawey, A.; Chaer, I.

    2010-01-01

    Refrigeration has become an essential part of the food chain. It is used in all stages of the chain, from food processing, to distribution, retail and final consumption in the home. The food industry employs both chilling and freezing processes where the food is cooled from ambient to temperatures above 0 deg. C in the former and between -18 deg. C and -35 deg. C in the latter to slow the physical, microbiological and chemical activities that cause deterioration in foods. In these processes mechanical refrigeration technologies are invariably employed that contribute significantly to the environmental impacts of the food sector both through direct and indirect greenhouse gas emissions. To reduce these emissions, research and development worldwide is aimed at both improving the performance of conventional systems and the development of new refrigeration technologies of potentially much lower environmental impacts. This paper provides a brief review of both current state of the art technologies and emerging refrigeration technologies that have the potential to reduce the environmental impacts of refrigeration in the food industry. The paper also highlights research and development needs to accelerate the development and adoption of these technologies by the food sector.

  11. Fighting Child Pornography: A Review of Legal and Technological Developments

    Directory of Open Access Journals (Sweden)

    Jasmine Eggestein

    2014-12-01

    Full Text Available In our digitally connected world, the law is arguably behind the technological developments of the Internet age.  While this causes many issues for law enforcement, it is of particular concern in the area of child pornography in the United States.  With the wide availability of technologies such as digital cameras, peer-to-peer file sharing, strong encryption, Internet anonymizers and cloud computing, the creation and distribution of child pornography has become more widespread. Simultaneously, fighting the growth of this crime has become more difficult.  This paper explores the development of both the legal and technological environments surrounding digital child pornography.  In doing so, we cover the complications that court decisions have given law enforcement who are trying to investigate and prosecute child pornographers.  We then provide a review of the technologies used in this crime and the forensic challenges that cloud computing creates for law enforcement.  We note that both legal and technological developments since the 1990s seem to be working to the advantage of users and sellers of child pornography.  Before concluding, we provide a discussion and offer observations regarding this subject.

  12. Intraoral Scanner Technologies: A Review to Make a Successful Impression

    Directory of Open Access Journals (Sweden)

    Raphaël Richert

    2017-01-01

    Full Text Available To overcome difficulties associated with conventional techniques, impressions with IOS (intraoral scanner and CAD/CAM (computer-aided design and manufacturing technologies were developed for dental practice. The last decade has seen an increasing number of optical IOS devices, and these are based on different technologies; the choice of which may impact on clinical use. To allow informed choice before purchasing or renewing an IOS, this article summarizes first the technologies currently used (light projection, distance object determination, and reconstruction. In the second section, the clinical considerations of each strategy such as handling, learning curve, powdering, scanning paths, tracking, and mesh quality are discussed. The last section is dedicated to the accuracy of files and of the intermaxillary relationship registered with IOS as the rendering of files in the graphical user interface is often misleading. This overview leads to the conclusion that the current IOS is adapted for a common practice, although differences exist between the technologies employed. An important aspect highlighted in this review is the reduction in the volume of hardware which has led to an increase in the importance of software-based technologies.

  13. Effect of Hurdle Technology in Food Preservation: A Review.

    Science.gov (United States)

    Singh, Shiv; Shalini, Rachana

    2016-01-01

    Hurdle technology is used in industrialized as well as in developing countries for the gentle but effective preservation of foods. Hurdle technology was developed several years ago as a new concept for the production of safe, stable, nutritious, tasty, and economical foods. Previously hurdle technology, i.e., a combination of preservation methods, was used empirically without much knowledge of the governing principles. The intelligent application of hurdle technology has become more prevalent now, because the principles of major preservative factors for foods (e.g., temperature, pH, aw, Eh, competitive flora), and their interactions, became better known. Recently, the influence of food preservation methods on the physiology and behavior of microorganisms in foods, i.e. their homeostasis, metabolic exhaustion, stress reactions, are taken into account, and the novel concept of multi-target food preservation emerged. The present contribution reviews the concept of the potential hurdles for foods, the hurdle effect, and the hurdle technology for the prospects of the future goal of a multi-target preservation of foods.

  14. Probiotics in allergy treatment: a literature review

    Directory of Open Access Journals (Sweden)

    Louise Crovesy

    2017-10-01

    Full Text Available Allergy is a exacerbate response of immune system to a triggering element. A probable cause of allergies is gut microbiota composition. It has strong relationship with development of human immune system and this is formed in intrauterine life and early childhood, crucial periods for formation adequate microbiota. In this sense modulation gut microbiota by probiotics could prevent or help in the treatment of allergic diseases such as allergic rhinitis, asthma, atopic dermatitis and food allergy. Studies published to date are controversial. It is difficult to determine whether the probiotic can be used in the treatment and prevention of allergic diseases.

  15. Wearable technology for spine movement assessment: A systematic review.

    Science.gov (United States)

    Papi, Enrica; Koh, Woon Senn; McGregor, Alison H

    2017-11-07

    Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies to assess the spine in adults performing dynamic movements. Two reviewers independently identified relevant papers. Customised data extraction and quality appraisal form were developed to extrapolate key details and identify risk of biases of each study. Twenty-two articles were retrieved that met the inclusion criteria: 12 were deemed of medium quality (score 33.4-66.7%), and 10 of high quality (score >66.8%). The majority of articles (19/22) reported validation type studies. Only 6 reported data collection in real-life environments. Multiple sensors type were used: electrogoniometers (3/22), strain gauges based sensors (3/22), textile piezoresistive sensor (1/22) and accelerometers often used with gyroscopes and magnetometers (15/22). Two sensors units were mainly used and placing was commonly reported on the spine lumbar and sacral regions. The sensors were often wired to data transmitter/logger resulting in cumbersome systems. Outcomes were mostly reported relative to the lumbar segment and in the sagittal plane, including angles, range of motion, angular velocity, joint moments and forces. This review demonstrates the applicability of wearable technology to assess the spine, although this technique is still at an early stage of development. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  16. Innovative Treatment Technologies for Natural Waters and Wastewaters

    Energy Technology Data Exchange (ETDEWEB)

    Childress, Amy E.

    2011-07-01

    The research described in this report focused on the development of novel membrane contactor processes (in particular, forward osmosis (FO), pressure retarded osmosis (PRO), and membrane distillation (MD)) in low energy desalination and wastewater treatment applications and in renewable energy generation. FO and MD are recently gaining national and international attention as viable, economic alternatives for removal of both established and emerging contaminants from natural and process waters; PRO is gaining worldwide attention as a viable source of renewable energy. The interrelationship of energy and water are at the core of this study. Energy and water are inextricably bound; energy usage and production must be considered when evaluating any water treatment process for practical application. Both FO and MD offer the potential for substantial energy and resource savings over conventional treatment processes and PRO offers the potential for renewable energy or energy offsets in desalination. Combination of these novel technologies with each other, with existing technologies (e.g., reverse osmosis (RO)), and with existing renewable energy sources (e.g., salinity gradient solar ponds) may enable much less expensive water production and also potable water production in remote or distributed locations. Two inter-related projects were carried out in this investigation. One focused on membrane bioreactors for wastewater treatment and PRO for renewable energy generation; the other focused on MD driven by a salinity gradient solar pond.

  17. Review of hormonal treatment of breast cancer

    African Journals Online (AJOL)

    2011-07-28

    Jul 28, 2011 ... Although tamoxifen is the established drug for hormonal treatment of breast cancer, cases of .... This is a growth factor protein which is over‑expressed in different types of .... These groups of drugs act as receptor binding competitors of estrogens and ... Mechanism of Action of Selective Estrogen. Receptor ...

  18. Review of treatment modalities of malleolar fractures

    Directory of Open Access Journals (Sweden)

    Xinhao Li

    2015-01-01

    Full Text Available The frequency of malleolar fractures according to available literature data is about 40% of bone fractures, the majority of them are severe articular or compound fractures. The article covers the experience, accumulated by the generations of orthopedists concerning diagnostics, choice of efficient treatment, decrease of disability and improvement of patients' living standards.

  19. Chronic orchialgia: Review of treatments old and new

    OpenAIRE

    Tojuola, Bayo; Layman, Jeffrey; Kartal, Ibrahim; Gudelogul, Ahmet; Brahmbhatt, Jamin; Parekattil, Sijo

    2016-01-01

    Introduction: Chronic orchialgia is historically and currently a challenging disease to treat. It is a diagnostic and therapeutic challenge for physicians. Conservative therapy has served as the first line of treatment. For those who fail conservative therapy, surgical intervention may be required. We aim to provide a review of currently available surgical options and novel surgical treatment options. Methods: A review of current literature was performed using PubMed. Literature discussing...

  20. A Critical Review on the Concept of Social Technology

    Directory of Open Access Journals (Sweden)

    Bettina Leibetseder

    2013-08-01

    Full Text Available Purpose—A critical analysis of the term social technology from a social science point of view.Design/Methodology/Approach—Review of the term “social technology” from a social science point of perspective in connection to the study of governmentality and power in a Foucauldian way.Findings—The article covers the perspective that social technology provides social science knowledge for a purpose. Such a notion allows an in depth debate about the meaning of social order in modern societies. Establishing distinctive techniques now forms the basis of the modern state and governance. Social technology forms the basis of governmental decisions; it allows for a use of social theories and methods for a purpose in politics and introduces a specific conception of power between the individual and public powers. Therefore, it alters government in three ways: It provides expert power to define solutions for social problems based on social science knowledge. It transforms government. Social technology exemplifies a support system for an ordered method of the way of government, it allows for the conduct of others and self based on scientific expertise. It can define new areas of problems in need of a change of government.Research limitations/implications—Consequently, social technology requests a critical analysis using a governmental approach. Such an approach focuses on problems on the governed subject and how governing works and why it has evolved in that way towards the subject and what kind of ideas and thinking lies within the discourse.Research type—general review.

  1. Technological feasibility studies on combination treatments for subtropical fruits

    International Nuclear Information System (INIS)

    Brodrick, H.T.; Linde, H.J. van der

    1981-01-01

    Research with subtropical fruits such as papayas and mangoes had advanced beyond the experimental stage in South Africa. This may be attributed to the potential economic benefits likely to be obtained from the combination of heat and irradiation treatments. The outcome of recent marketing trials, however, revealed several problem areas which need further investigation. Some of these problems were studied in greater detail and are reported in this presentation. The effect of time delays between hot-water and irradiation treatments on the efficacy in disease control in the fruit, has received particular attention in the investigations. Efforts have also been made to correlate these results with those obtained in fungal studies in the laboratory. These and other factors relating to the technological feasibility in the use of combined treatments for the preservation of mangoes and papayas are discussed and recommendations or guidelines for future studies are given in this paper. (author)

  2. Treatment technology for removing radon from small community water supplies

    International Nuclear Information System (INIS)

    Kinner, N.E.; Quern, P.A.; Schell, G.S.; Lessard, C.E.; Clement, J.A.

    1989-01-01

    Radon contamination of drinking water primarily affects individual homeowners and small communities using ground-water supplies. Presently, three types of treatment processes have been used to remove radon: granular activated carbon adsorption (GAC), diffused-bubble aeration, and packed-tower aeration. In order to obtain data on these treatment alternatives for small communities water supplies, a field evaluation study was conducted on these three processes as well as on several modifications to aeration of water in storage tanks considered to be low cost/low technology alternatives. The paper presents the results of these field studies conducted at a small mobile home park in rural New Hampshire. The conclusion of the study was that the selection of the appropriate treatment system to remove radon from drinking water depends primarily upon: (1) precent removal of process; (2) capital operating and maintenance costs; (3) safety (radiation); and (4) raw water quality (Fe, Mn, bacteria and organics)

  3. A Review of Neurofeedback Treatment for Pediatric ADHD

    Science.gov (United States)

    Lofthouse, Nicholas; Arnold, L. Eugene; Hersch, Sarah; Hurt, Elizabeth; DeBeus, Roger

    2012-01-01

    Objective: The aim of this paper was to review all randomized published trials and unpublished conference presentations on the neurofeedback (NF) treatment of pediatric ADHD, and their relevance, strengths, and limitations. Method: Via PsychInfo and Medline searches and contacts with NF researchers 14 studies were identified and reviewed. Results:…

  4. Particle radiotherapy emerging technology for treatment of cancer

    CERN Document Server

    Sahoo, Narayan

    2016-01-01

    The results of decades of research and development are providing compelling evidence about the efficacy of radiation therapy with proton and carbon ion beams to achieve superior complication free tumor control leading to a world-wide rapid growth in their clinical use. This book contains comprehensive reviews of the state of the art of the technology and physics of heavy charge particle therapy by the experts from the leading cancer centers of world that will be valuable as a practical guide for radiation therapy professionals interested in these modalities.

  5. Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review

    Science.gov (United States)

    Farahani, Hamid; Wagiran, Rahman; Hamidon, Mohd Nizar

    2014-01-01

    Humidity measurement is one of the most significant issues in various areas of applications such as instrumentation, automated systems, agriculture, climatology and GIS. Numerous sorts of humidity sensors fabricated and developed for industrial and laboratory applications are reviewed and presented in this article. The survey frequently concentrates on the RH sensors based upon their organic and inorganic functional materials, e.g., porous ceramics (semiconductors), polymers, ceramic/polymer and electrolytes, as well as conduction mechanism and fabrication technologies. A significant aim of this review is to provide a distinct categorization pursuant to state of the art humidity sensor types, principles of work, sensing substances, transduction mechanisms, and production technologies. Furthermore, performance characteristics of the different humidity sensors such as electrical and statistical data will be detailed and gives an added value to the report. By comparison of overall prospects of the sensors it was revealed that there are still drawbacks as to efficiency of sensing elements and conduction values. The flexibility offered by thick film and thin film processes either in the preparation of materials or in the choice of shape and size of the sensor structure provides advantages over other technologies. These ceramic sensors show faster response than other types. PMID:24784036

  6. Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review

    Directory of Open Access Journals (Sweden)

    Hamid Farahani

    2014-04-01

    Full Text Available Humidity measurement is one of the most significant issues in various areas of applications such as instrumentation, automated systems, agriculture, climatology and GIS. Numerous sorts of humidity sensors fabricated and developed for industrial and laboratory applications are reviewed and presented in this article. The survey frequently concentrates on the RH sensors based upon their organic and inorganic functional materials, e.g., porous ceramics (semiconductors, polymers, ceramic/polymer and electrolytes, as well as conduction mechanism and fabrication technologies. A significant aim of this review is to provide a distinct categorization pursuant to state of the art humidity sensor types, principles of work, sensing substances, transduction mechanisms, and production technologies. Furthermore, performance characteristics of the different humidity sensors such as electrical and statistical data will be detailed and gives an added value to the report. By comparison of overall prospects of the sensors it was revealed that there are still drawbacks as to efficiency of sensing elements and conduction values. The flexibility offered by thick film and thin film processes either in the preparation of materials or in the choice of shape and size of the sensor structure provides advantages over other technologies. These ceramic sensors show faster response than other types.

  7. A review on the process technology for Mo-99 production

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hoh; Yoo, Jae Hyung; Jung, Won Myung; Lee, Kyoo Il; Woo, Moon Sik; Hwang, Doo Sung; Kim, Yun Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-07-01

    Tc-99m is most frequently used in nuclear medical diagnostics because of its favourable nuclear properties and reasonable prices, and the demand of Tc-99m, is on the increase recently. Mo-99, the parent radionuclide of Tc-99m, is the only source of Tc-99m. This review described overall aspects of process technologies for Mo-99 production. Firstly, the chemical, physical and radioactive properties of Tc-99m, Mo-99 were examined to understand Mo-99 separation process. Also, the technology for Mo-99 production with both the neutron capture and nuclear fission method were examined. But the neutron capture method was scarcely used for large production of Mo-99 because of its low specific activity and high production cost. This review also described mainly process technologies in the nuclear fission method, fabrication and condition for irradiation of targets, transport and dissolution of targets irradiated, separation and purification of Mo-99, etc. Especially, for Mo-99 separation and purification process, the characteristics, merits and demerits of various processes, which have been developed in a few countries, were examined and analyzed. 30 figs., 16 tabs., 60 refs. (Author).

  8. Root resorption after orthodontic treatment: a review.

    Science.gov (United States)

    Jatania, Archana; Shivalinga, B M; Kiran, Jyothi

    2012-01-01

    Root resorption that occurs in permanent teeth is an unwanted process and is considered pathologic. Although apical root resorption occurs in individuals who have never experienced orthodontic tooth movement, the incidence among treated individuals is seen to be significantly higher. Some resorption occurs in most orthodontic patients, but because of repair the changes are difficult to detect with radiographic examination and therefore are clinically insignificant. This article gives a review of the various types of root resorption, the etiological factors, the biology and the identification of root resorption.

  9. A REVIEW ON SEWAGE TREATMENT AND POLISHING USING MOVING BED BIOREACTOR (MBBR

    Directory of Open Access Journals (Sweden)

    JAMAL ALI KAWAN

    2016-08-01

    Full Text Available Effluent treatment and polishing using moving bed bioreactors (MBBRs are advanced technique in biological treatment operations become increasing widely and popular use all over the world to treat various types of effluents with very different operating status. It is a combination of two separate processes suspended and attached growth systems for the treatment in order to minimize the concentrations of the contaminated parameters at the required level for reuse or final destination. The MBBR has been proved to be effective in great removing biochemical oxygen demand (BOD and chemical oxygen demand (COD with nutrients (N and P from the effluent stream simultaneously. It provides additional capacity of wastewater treatment technology with high treatment efficiency; low capital, operational, maintenance and replacement cost; single reliable and robust operation procedure. This process can be used for new sewage treatment works or for modifying (upgrading existing wastewater treatment plants as it is efficient, compact and easy to operate. The efficiency of MBBR depends on the filling percent of biofilm carriers to be provided inside the tank, surface area of the biocarrier, diffused aeration supply and the organic loading. The aim of this paper is reviewing the sewage treatment and polishing using moving bed bioreactor MBB technology as an alternative and successful method. It presents the advantages of the MBBR compared to conventional waste water treatment. The review also includes many relevant researches carried out at the laboratory andpilot scales plants that could improve these systems by enhancing performance and reducing costs.

  10. A review of waste heat recovery technologies for maritime applications

    International Nuclear Information System (INIS)

    Singh, Dig Vijay; Pedersen, Eilif

    2016-01-01

    Highlights: • Major waste heat sources available on ships have been reviewed. • A review of suitable waste heat recovery systems was conducted for marine vessels. • Technologies have been compared for their potential and suitability for marine use. • Kalina cycle offers the highest potential for marine waste heat recovery. • Turbo compound system most suitable for recovering diesel exhaust pressure energy. - Abstract: A waste heat recovery system produces power by utilizing the heat energy lost to the surroundings from thermal processes, at no additional fuel input. For marine vessels, about 50 percent of the total fuel energy supplied to diesel power-plant aboard is lost to the surroundings. While the total amount of wasted energy is considerable, the quality of this energy is quite low due to its low temperature and has limited potential for power production. Effective waste heat recovery systems use the available low temperature waste heat to produce mechanical/electrical power with high efficiency value. In this study a review of different waste heat recovery systems has been conducted, to lay out the potential recovery efficiencies and suitability for marine applications. This work helps in identifying the most suitable heat recovery technologies for maritime use depending on the properties of shipboard waste heat and achievable recovery efficiencies, whilst discussing the features of each type of system.

  11. Review of early assessment models of innovative medical technologies.

    Science.gov (United States)

    Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

    2017-08-01

    Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  12. Review : Pressure Ulcer and Its treatment

    Directory of Open Access Journals (Sweden)

    Bijan Khorasani

    2004-10-01

    Full Text Available Pressure ulcer is a signifcant problem in elderly and critically ill patients, causing pain, decreasing quality of life and leading to prolonged hospital stay. Treatment of pressure ulcer to improve health status is a cost-effective approach. So, preventing the ulcers will be economical. Pressure ulcer is considered as a damage or necrosis of skin and its layers, which happens when there is a considerable pressure over the tissues. If the capillary arterie's pressure reaches 70 mmHg (2 times more than the normal pressure pressure ulcer happens and depending on the depth of the ulcer, will be divided into 4 stages. The most important point for preventing the ulcers is reducing the pressure. Patients should be repositioned to relieve or minimize the tissue pressure. Considering the type of the ulcer, the necessary treatment (dressing, Antibiotic Therapy, debridement or surgery should be performed.

  13. Assessment: efficacy of transcutaneous electric nerve stimulation in the treatment of pain in neurologic disorders (an evidence-based review): report of the Therapeutics and Technology Assessment Subcommittee of the American Academy of Neurology.

    Science.gov (United States)

    Dubinsky, Richard M; Miyasaki, Janis

    2010-01-12

    To determine if transcutaneous electric nerve stimulation (TENS) is efficacious in the treatment of pain in neurologic disorders. We performed a systematic literature search of Medline and the Cochrane Library from inception to April 2009. There are conflicting reports of TENS compared to sham TENS in the treatment of chronic low back pain, with 2 Class II studies showing benefit, but 2 Class I studies and another Class II study not showing benefit. Because the Class I studies are stronger evidence, TENS is established as ineffective for the treatment of chronic low back pain (2 Class I studies). TENS is probably effective in treating painful diabetic neuropathy (2 Class II studies). Transcutaneous electric nerve stimulation (TENS) is not recommended for the treatment of chronic low back pain (Level A). TENS should be considered in the treatment of painful diabetic neuropathy (Level B). Further research into the mechanism of action of TENS is needed, as well as more rigorous studies for determination of efficacy.

  14. Review : Pressure Ulcer and Its treatment

    OpenAIRE

    Bijan Khorasani; Ali Ghafouri

    2004-01-01

    Pressure ulcer is a signifcant problem in elderly and critically ill patients, causing pain, decreasing quality of life and leading to prolonged hospital stay. Treatment of pressure ulcer to improve health status is a cost-effective approach. So, preventing the ulcers will be economical. Pressure ulcer is considered as a damage or necrosis of skin and its layers, which happens when there is a considerable pressure over the tissues. If the capillary arterie's pressure reaches 70 mmHg (2 ti...

  15. Treatment of nasopharyngeal tumors: literature review

    International Nuclear Information System (INIS)

    Noel, G.; Dessard-Diana, B.; Vignot, S.; Mazeron, J.J.; Noel, G.; Mazeron, J.J.

    2002-01-01

    The conventional radiotherapy and the associated treatments improved the prognostic of nasopharyngeal cancer. A better selection of the patients who must have a more aggressive treatment also probably contributed to this improvement. Even if a relation could be found between the locoregional relapse rate and the distant relapse rate, these two events remain often independent. It results from it that the improvement of local control rate necessarily does not result in a better control of the disease. The patients with a locally advanced tumor, with or not an invasion of the base of the skull and/or neurological symptoms, must have an aggressive locally treatment. This probably includes the increase in dose delivered to the tumor via a more conformational radiotherapy, a brachytherapy, radiotherapy in stereotaxic conditions or other techniques. Dose within the tumor must be at least 70 Gy and the prophylactic nodal dose, at least 50 Gy. CT scan and MRI are essential for delineating the volumes of interest. The protocols of hyperfractionated radiotherapy did not give convincing results. Association with chemotherapy allowed, on the other hand, an improvement of the prognostic locally advanced cancers. Neo-adjuvant or adjuvant chemotherapy was largely used to attempt to limit the risks of systemic dissemination, but an improvement of results was not clearly demonstrated. An improvement of the rates of survival and control of the disease, on the other hand, was observed in a certain number of studies with the chemoradiotherapy. In the event of locoregional relapse, an aggressive attitude can allow the control of the disease in the absence of systemic dissemination. Salvage treatments are, however, disappointing for when distant relapse occurs which suggests. (author)

  16. The use of virtual reality technology in the treatment of anxiety and other psychiatric disorders

    Science.gov (United States)

    Maples-Keller, Jessica L.; Bunnell, Brian E.; Kim, Sae-Jin; Rothbaum, Barbara O.

    2016-01-01

    Virtual reality, or VR, allows users to experience a sense of presence in a computer-generated three-dimensional environment. Sensory information is delivered through a head mounted display and specialized interface devices. These devices track head movements so that the movements and images change in a natural way with head motion, allowing for a sense of immersion. VR allows for controlled delivery of sensory stimulation via the therapist and is a convenient and cost-effective treatment. The primary focus of this article is to review the available literature regarding the effectiveness of incorporating VR within the psychiatric treatment of a wide range of psychiatric disorders, with a specific focus on exposure-based intervention for anxiety disorders. A systematic literature search was conducted in order to identify studies implementing VR based treatment for anxiety or other psychiatric disorders. This review will provide an overview of the history of the development of VR based technology and its use within psychiatric treatment, an overview of the empirical evidence for VR based treatment, the benefits for using VR for psychiatric research and treatment, recommendations for how to incorporate VR into psychiatric care, and future directions for VR based treatment and clinical research. PMID:28475502

  17. Review of the optic neuritis treatment trial

    International Nuclear Information System (INIS)

    Chuman, Hideki

    2007-01-01

    The Optic Neuritis Treatment Trial (ONTT) is a multicenter controlled clinical trial. The primary objective of this trial is to assess the efficacy of corticosteroids in the treatment of optic neuritis. Treatment with intravenous methylprednisolone resulted in a more rapid return of the visual function to normal. Oral prednisone alone was associated with a significantly increased risk of recurrent optic neuritis. The trial also provided invaluable information about the clinical profile of optic neuritis and its relationship to Multiple Sclerosis (MS). At 6 months after the initial optic neuritis attack, a 12-month follow-up of patients was begun and the data collected during this period indicated that visual acuity was more than 20/20 in 69%, 20/40 in 93%, and 20/200 or less in only 3% of the patients. The risk of MS within 10 years after the first episode of optic neuritis was 56% among patients who were found to have had one or more characteristic white-matter lesions at baseline, as compared to only 22% for patients who had no observable lesions at baseline. (author)

  18. Treatments for esophageal cancer. A review

    International Nuclear Information System (INIS)

    Kato, Hiroyuki; Nakajima, Masanobu

    2013-01-01

    Esophageal cancer is the eighth most common form of cancer worldwide. The treatments for esophageal cancer depend on its etiology. For mucosal cancer, endoscopic mucosal resection and endoscopic submucosal dissection are standard, while for locally advanced cancer, esophagectomy remains the mainstay. The three most common techniques for thoracic esophagectomy are the transhiatal approach, the Ivor Lewis esophagectomy (right thoracotomy and laparotomy), and the McKeown technique (right thoracotomy followed by laparotomy and neck incision with cervical anastomosis). Surgery for carcinoma of the cervical esophagus requires an extensive procedure with laryngectomy in many cases. When the tumor is more advanced, neoadjuvant chemotherapy or neoadjuvant chemoradiotherapy is added. The theoretical advantages of adding chemotherapy to the treatment of esophageal cancer are potential tumor down-staging prior to surgery, as well as targeting micrometastases and, thus, decreasing the risk of distant metastasis. Cisplatin- and 5-fluorouracil-based regimes are used worldwide. Chemoradiotherapy is the standard for unresectable esophageal cancer and could also be considered as an option for resectable tumors. For patients who are medically or technically inoperable, concurrent chemoradiotherapy should be the standard of care. Although neoadjuvant chemoradiotherapy followed by surgery or salvage surgery after definitive chemoradiotherapy is a practical treatment; judicious patient selection is crucial. It is important to have a thorough understanding of these therapeutic modalities to assist in this endeavor. (author)

  19. Advances in CO2 capture technology: A patent review

    International Nuclear Information System (INIS)

    Li, Bingyun; Duan, Yuhua; Luebke, David; Morreale, Bryan

    2013-01-01

    Highlights: ► Timely updates on carbon capture technologies: More than 1000 patents on solvent, sorbent, and membrane. ► More patents on solvent and sorbent compared to membrane. ► Environmental and health concerns exist regarding carbon capture technologies. -- Abstract: Carbon dioxide (CO 2 ) emissions are believed to be a major contributor to global warming. As a consequence, large anthropogenic CO 2 sources worldwide will eventually be required to implement CO 2 capture and storage technologies to control CO 2 emissions. In order to guide the establishment of policies for CO 2 removal, we reviewed the current status of CO 2 capture patents and technologies based on the Espacenet patent database and found that more than 1000 patents have been published on sorbent, solvent, and membrane. More than 60% of these patents were published since the year 2000, and a sharp increase in patent numbers was seen in the last several years; ∼25% patents were published in the last 2 years. Substantially more patents on CO 2 removal and separation technologies are expected in the coming years. Meanwhile, the top four major types of patents, which consist of more than 2/3 of these patents, were patents granted by Japan (JP), United States (US), World Intellectual Property Organization (WO), and China (CN), and approximately half of the patents were JP and US patents. Unfortunately, no current technologies for removing CO 2 from large sources like coal-based power plants exist which satisfy the needs of safety, efficiency, and economy; further enhancement and innovation are much needed.

  20. Separators - Technology review: Ceramic based separators for secondary batteries

    Energy Technology Data Exchange (ETDEWEB)

    Nestler, Tina; Schmid, Robert; Münchgesang, Wolfram; Bazhenov, Vasilii; Meyer, Dirk C. [Technische Universität Bergakademie Freiberg, Institut für Experimentelle Physik, Leipziger Str. 23, 09596 Freiberg (Germany); Schilm, Jochen [Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Winterbergstraße 28, 01277 Dresden (Germany); Leisegang, Tilmann [Fraunhofer-Technologiezentrum Halbleitermaterialien THM, Am St.-Niclas-Schacht 13, 09599 Freiberg (Germany)

    2014-06-16

    Besides a continuous increase of the worldwide use of electricity, the electric energy storage technology market is a growing sector. At the latest since the German energy transition ('Energiewende') was announced, technological solutions for the storage of renewable energy have been intensively studied. Storage technologies in various forms are commercially available. A widespread technology is the electrochemical cell. Here the cost per kWh, e. g. determined by energy density, production process and cycle life, is of main interest. Commonly, an electrochemical cell consists of an anode and a cathode that are separated by an ion permeable or ion conductive membrane - the separator - as one of the main components. Many applications use polymeric separators whose pores are filled with liquid electrolyte, providing high power densities. However, problems arise from different failure mechanisms during cell operation, which can affect the integrity and functionality of these separators. In the case of excessive heating or mechanical damage, the polymeric separators become an incalculable security risk. Furthermore, the growth of metallic dendrites between the electrodes leads to unwanted short circuits. In order to minimize these risks, temperature stable and non-flammable ceramic particles can be added, forming so-called composite separators. Full ceramic separators, in turn, are currently commercially used only for high-temperature operation systems, due to their comparably low ion conductivity at room temperature. However, as security and lifetime demands increase, these materials turn into focus also for future room temperature applications. Hence, growing research effort is being spent on the improvement of the ion conductivity of these ceramic solid electrolyte materials, acting as separator and electrolyte at the same time. Starting with a short overview of available separator technologies and the separator market, this review focuses on ceramic