High-performance PbS quantum dot vertical field-effect phototransistor using graphene as a transparent electrode

Science.gov (United States)

Che, Yongli; Zhang, Yating; Cao, Xiaolong; Song, Xiaoxian; Zhang, Haiting; Cao, Mingxuan; Dai, Haitao; Yang, Junbo; Zhang, Guizhong; Yao, Jianquan

2016-12-01

Solution processed photoactive PbS quantum dots (QDs) were used as channel in high-performance near-infrared vertical field-effect phototransistor (VFEpT) where monolayer graphene embedded as transparent electrode. In this vertical architecture, the PbS QD channel was sandwiched and naturally protected between the drain and source electrodes, which made the device ultrashort channel length (110 nm) simply the thickness of the channel layer. The VFEpT exhibited ambipolar operation with high mobilities of μe = 3.5 cm2/V s in n-channel operation and μh = 3.3 cm2/V s in p-channel operation at low operation voltages. By using the photoactive PbS QDs as channel material, the VFEpT exhibited good photoresponse properties with a responsivity of 4.2 × 102 A/W, an external quantum efficiency of 6.4 × 104% and a photodetectivity of 2.1 × 109 Jones at the light irradiance of 36 mW/cm2. Additionally, the VFEpT showed excellent on/off switching with good stability and reproducibility and fast response speed with a short rise time of 12 ms in n-channel operation and 10.6 ms in p-channel operation. These high mobilities, good photoresponse properties and simplistic fabrication of our VFEpTs provided a facile route to the high-performance inorganic photodetectors.

Acoustic transparency and slow sound using detuned acoustic resonators

DEFF Research Database (Denmark)

Santillan, Arturo Orozco; Bozhevolnyi, Sergey I.

2011-01-01

We demonstrate that the phenomenon of acoustic transparency and slowsound propagation can be realized with detuned acoustic resonators (DAR), mimicking thereby the effect of electromagnetically induced transparency (EIT) in atomic physics. Sound propagation in a pipe with a series of side...

Measures of transparency for decommissioning of test site

International Nuclear Information System (INIS)

Andrusenko, B. A.; Smirnov, V. G.; Sherbina, A. N.

1997-01-01

This paper presents non-traditional directions of activity of the Institute specialists to solve complicated scientific and technical tasks within the framework of observance of international obligations on non-proliferation. In the latest time much attention is paid to the reaching of mutual confidence between sides during a control over the observance of agreements regarding disarmament. How can we demonstrate implementation of agreements to each of both sides, not having leakage of confidential or, so called, 'sensitive' information? That means to ensure 'transparency' of activity, not doing a damage to both sides. It is needed to note that the meaning of the above term can be substantially varied, depending on what field of activity it is used in. For instance, the meaning of the transparency measures adopted in joint program of RFNC and SNL for future control of disassembling of nuclear weapon is represented as ''...measures which can be taken for building of the confidence of both sides, assuring that these sides reach mutual understanding, and one side can inspect activity of another side as well as its outcomes which are a part of lifetime cycle of nuclear weapon. We consider this meaning to be acceptable for objectives and principles indicated in joint Russian-Kazakhstani activity on decommisioning of the test site. Hereafter in this paper we will use terminology on the transparency measures which is adopted for future control of the nuclear weapon disassembling. The transparency measures application distates a necessity of development of documentation drawing system of individual procedures and operations, which has 'sensitive' information and to which some transporancy measures, and be in accord with the existent legislation of Russia and Kazakhstan. There is an example of nuclear device (ND) destruction in a tunnel 108 located on the former Semipalatinsk test site, that represents experience gained by specialists of RFNC-RITP in the field of the

Fabrication of a vertical sidewall using double-sided anisotropic etching of 〈1 0 0〉 oriented silicon

International Nuclear Information System (INIS)

Kim, Hyun-Seok; Bang, Yong-Seung; Song, Eun-Seok; Kim, Yong-Kweon; Kim, Jung-Mu; Ji, Chang-Hyeon

2012-01-01

A double-sided wet etch process has been proposed to fabricate vertical structures in 〈1 0 0〉 oriented silicon substrate. Both sides of a {1 0 0} silicon wafer have been patterned identically along the 〈1 1 0〉 direction, and etched using potassium hydroxide (KOH) solution. By precisly controlling the etch time, using etch-timer structure and additive control, structures with smooth and vertical {1 1 0} sidewalls have been fabricated at the edges of a rectangular opening without undercut. Rectangular through-holes, bridges and cantilevers have been constructed using the proposed process. The measured average surface roughness of the vertical sidewall was 481 nm, which has been further reduced to 217 nm and 218 nm by postetching using a KOH–IPA and TMAH–Triton mixture, respectively. Slanted {4 1 1} planes exposed at the concave corners during the vertical etch process have been successfully removed or diminished by the postetching process. A bridge structure with a high aspect ratio of 39:1 has been fabricated, and cantilevers without undercutting were successfully constructed by applying the compensation technique. The proposed process can potentially be utilized in place of the deep reactive ion etching process for the fabrication of structures having vertical through-holes, such as through-silicon vias, high aspect ratio springs and filters for microfluidic applications. (paper)

Three-terminal resistive switching memory in a transparent vertical-configuration device

International Nuclear Information System (INIS)

Ungureanu, Mariana; Llopis, Roger; Casanova, Fèlix; Hueso, Luis E.

2014-01-01

The resistive switching phenomenon has attracted much attention recently for memory applications. It describes the reversible change in the resistance of a dielectric between two non-volatile states by the application of electrical pulses. Typical resistive switching memories are two-terminal devices formed by an oxide layer placed between two metal electrodes. Here, we report on the fabrication and operation of a three-terminal resistive switching memory that works as a reconfigurable logic component and offers an increased logic density on chip. The three-terminal memory device we present is transparent and could be further incorporated in transparent computing electronic technologies

Vertical cavity laser

DEFF Research Database (Denmark)

2016-01-01

The present invention provides a vertical cavity laser comprising a grating layer comprising an in-plane grating, the grating layer having a first side and having a second side opposite the first side and comprising a contiguous core grating region having a grating structure, wherein an index...

Target Advertising and Market Transparency

OpenAIRE

Stühmeier, Torben

2012-01-01

This paper examines the effects of increased transparency over online news sources, e.g. due to news aggregators, on online news outlets and the advertising industry. The role of news aggregators is controversially discussed, where the discussion widely points on user side effect. The present paper widens the discussion on the advertising side and shows that aggregators can help to better target advertising messages to a more homogenous group of users and, in turn, may both benefit advertiser...

Demonstration of slow sound propagation and acoustic transparency with a series of detuned resonators

DEFF Research Database (Denmark)

Santillan, Arturo Orozco; Bozhevolnyi, Sergey I.

2014-01-01

We present experimental results demonstrating the phenomenon of acoustic transparency with a significant slowdown of sound propagation realized with a series of paired detuned acoustic resonators (DAR) side-attached to a waveguide. The phenomenon mimics the electromagnetically induced transparency...... than 20 dB on both sides of the transparency window, and we quantify directly (using a pulse propagation) the acoustic slowdown effect, resulting in the sound group velocity of 9.8 m/s (i.e. in the group refractive index of 35). We find very similar values of the group refractive index by using...

Effect of the Mesh Transparency on the Electrical Characteristics of DC Pseudo Discharge

International Nuclear Information System (INIS)

Al-Halim, M. A. Abd; Abu-Hashem, A.; Moubarak, D. I.

2015-01-01

A DC pseudo discharge for air has been studied. Air pressure is used in the range between 0.7 Torr and 12 Torr. The breakdown occurs between a plane cathode and a mesh anode at transparencies of 19%, 46%, and 65%. The current-voltage characteristic curves of the discharge, which are measured at different pressures, distances, and mesh transparences, take effect in the region of abnormal glow. The discharge voltage decreases as the air pressure increases, while more voltage is needed to maintain the discharge when either the mesh transparency or the inter-electrode distance is increased. An increment of mesh transparency causes high negative potential behind the mesh due to the high concentration of electrons, which accumulate and collide with neutral atoms. Paschen curves deviate from the expected regular one. The left side of Paschen curves appears at inter-electrode distance of 1 mm, whereas the right side appears at inter-electrode distance of 5 mm. The intermediate region is observed only at 3 mm distance between the two electrodes. For the transparency range used in this work, it is found that the decrement of the breakdown voltage, on the right side, depends on the mesh transparency. For different electrode separations, the measured Paschen curves are coincident and deviate from the standard ones of Paschen's law. (paper)

Transparent organic light-emitting diodes with different bi-directional emission colors using color-conversion capping layers

Energy Technology Data Exchange (ETDEWEB)

Lee, Jonghee, E-mail: jonghee.lee@etri.re.kr [OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon 305-700 (Korea, Republic of); Institut für Angewandte Photophysik, Technische Universität Dresden, George-Bähr-Straße 1, 01062 Dresden (Germany); Koh, Tae-Wook [Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of); Cho, Hyunsu [OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon 305-700 (Korea, Republic of); Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of); Schwab, Tobias [Institut für Angewandte Photophysik, Technische Universität Dresden, George-Bähr-Straße 1, 01062 Dresden (Germany); Lee, Jae-Hyun [Department School of Global Convergence Studies, Hanbat National University, San 16-1, Duckmyoung-dong, Daejeon 305-719 (Korea, Republic of); Hofmann, Simone [Institut für Angewandte Photophysik, Technische Universität Dresden, George-Bähr-Straße 1, 01062 Dresden (Germany); Lee, Jeong-Ik [OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon 305-700 (Korea, Republic of); Yoo, Seunghyup [Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of); and others

2015-06-15

We report a study on transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors, enabled by color-conversion organic capping layers. Starting from a transparent blue OLED with an uncapped Ag top electrode exhibiting an average transmittance of 33.9%, a 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)-doped tris-(8-hydroxy-quinolinato)-aluminum (Alq3) capping layer is applied to achieve color-conversion from blue to orange-red on the top side while maintaining almost unchanged device transmittance. This color-conversion capping layer does not only change the color of the top side emission, but also enhances the overall device efficiency due to the optical interaction of the capping layer with the primary blue transparent OLED. Top white emission from the transparent bi-directional OLED exhibits a correlated color temperature around 6000–7000 K, with excellent color stability as evidenced by an extremely small variation in color coordinate of Δ(x,y)=(0.002, 0.002) in the forward luminance range of 100–1000 cd m{sup −2}. At the same time, the blue emission color of bottom side is not influenced by the color conversion capping layer, which finally results in different emission colors of the two opposite sides of our transparent OLEDs. - Highlights: • We report transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors. • Transparent blue OLED with color-conversion organic capping layers (CCL) shows orange top side emission. • Top white emission exhibits a CCT around 7000 K, with excellent color stability on a driving voltage.

Transparent organic light-emitting diodes with different bi-directional emission colors using color-conversion capping layers

International Nuclear Information System (INIS)

Lee, Jonghee; Koh, Tae-Wook; Cho, Hyunsu; Schwab, Tobias; Lee, Jae-Hyun; Hofmann, Simone; Lee, Jeong-Ik; Yoo, Seunghyup

2015-01-01

We report a study on transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors, enabled by color-conversion organic capping layers. Starting from a transparent blue OLED with an uncapped Ag top electrode exhibiting an average transmittance of 33.9%, a 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)-doped tris-(8-hydroxy-quinolinato)-aluminum (Alq3) capping layer is applied to achieve color-conversion from blue to orange-red on the top side while maintaining almost unchanged device transmittance. This color-conversion capping layer does not only change the color of the top side emission, but also enhances the overall device efficiency due to the optical interaction of the capping layer with the primary blue transparent OLED. Top white emission from the transparent bi-directional OLED exhibits a correlated color temperature around 6000–7000 K, with excellent color stability as evidenced by an extremely small variation in color coordinate of Δ(x,y)=(0.002, 0.002) in the forward luminance range of 100–1000 cd m −2 . At the same time, the blue emission color of bottom side is not influenced by the color conversion capping layer, which finally results in different emission colors of the two opposite sides of our transparent OLEDs. - Highlights: • We report transparent organic light-emitting diodes (OLEDs) with different bi-directional emission colors. • Transparent blue OLED with color-conversion organic capping layers (CCL) shows orange top side emission. • Top white emission exhibits a CCT around 7000 K, with excellent color stability on a driving voltage

Transparent organic light-emitting diodes with balanced white emission by minimizing waveguide and surface plasmonic loss.

Science.gov (United States)

Zhang, Yi-Bo; Ou, Qing-Dong; Li, Yan-Qing; Chen, Jing-De; Zhao, Xin-Dong; Wei, Jian; Xie, Zhong-Zhi; Tang, Jian-Xin

2017-07-10

It is challenging in realizing high-performance transparent organic light-emitting diodes (OLEDs) with symmetrical light emission to both sides. Herein, an efficient transparent OLED with highly balanced white emission to both sides is demonstrated by integrating quasi-periodic nanostructures into the organic emitter and the metal-dielectric composite top electrode, which can simultaneously suppressing waveguide and surface plasmonic loss. The power efficiency and external quantum efficiency are raised to 83.5 lm W -1 and 38.8%, respectively, along with a bi-directional luminance ratio of 1.26. The proposed scheme provides a facile route for extending application scope of transparent OLEDs for future transparent displays and lightings.

Transparent and Flexible Supercapacitors with Networked Electrodes.

Science.gov (United States)

Kiruthika, S; Sow, Chaitali; Kulkarni, G U

2017-10-01

Transparent and flexible energy storage devices have received immense attention due to their suitability for innovative electronics and displays. However, it remains a great challenge to fabricate devices with high storage capacity and high degree of transmittance. This study describes a simple process for fabrication of supercapacitors with ≈75% of visible transparency and areal capacitance of ≈3 mF cm -2 with high stability tested over 5000 cycles of charging and discharging. The electrodes consist of Au wire networks obtained by a simple crackle template method which are coated with MnO 2 nanostructures by electrodeposition process. Importantly, the membrane separator itself is employed as substrate to bring in the desired transparency and light weight while additionally exploiting its porous nature in enhancing the interaction of electrolyte with the active material from both sides of the substrate, thereby enhancing the storage capacity. The method opens up new ways for fabricating transparent devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Buoyancy effects in vertical rectangular duct with coplanar magnetic field and single sided heat load

Science.gov (United States)

Kostichev, P. I.; Poddubnyi, I. I.; Razuvanov, N. G.

2017-11-01

In some DEMO blanket designs liquid metal flows in vertical ducts of rectangular cross-section between ceramic breeder units providing their cooling. Heat exchange in these conditions is governed by the influence of magnetic field (coplanar) and by buoyancy effects that depend on the flow orientation to the gravity vector (downward and upward flow). Magnetohydrodynamic and heat transfer of liquid metal in vertical rectangular ducts is not well researched. Experimental study of buoyancy effects in rectangular duct with coplanar magnetic field for one-sided heat load and downward and upward flowsis presented in this paper. The detail research with has been done on mercury MHD close loop with using of the probe technique allow to discover several advantageous and disadvantageous effects. The intensive impact of buoyancy force has been observed in a few regime of downward flow which has been laminarized by magnetic field. Due to the development in the flow of the secondary large-scale vortices heat transfer improved and the temperature fluctuations of the abnormally high intensity have been fixed. On the contrary, in the upward flow the buoyancy force stabilized the flow which lead to decreasing of the turbulence heat transfer ratio and, consequently, deterioration of heat transfer.

Enhanced tunability of plasmon induced transparency in graphene strips

International Nuclear Information System (INIS)

Shi, Xi; Su, Xiaopeng; Yang, Yaping

2015-01-01

The approach of slow-light efficiency manipulation is theoretically investigated in graphene analogue of electromagnetically induced transparency (EIT) system, which cannot be realized in conventional quantum regime. In this system, two graphene strips with different Fermi energies placed side by side as radiative elements have been discussed, and the coupling strength between radiative elements and dark elements is tuned by these radiative elements. Our proposed scheme exploits the tuning of coupling strength between the radiative elements and dark elements in contrast with the existing approaches that rely on tuning the damping rates of radiative or dark elements. The transparent window and group delays can be tuned by different coupling strength without changing the geometry of structure. This manipulation can be explained using a temporal coupled-mode theory. Furthermore, the hybridized states in this EIT-like system can be manipulated by tuning the Fermi energy of radiative elements. This kind of controllable electromagnetically induced transparency has many significant potential applications in optoelectronic, photodetectors, tunable sensors, and storage of optical data regimes

The influence of tyre transient side force properties on vehicle lateral acceleration for a time-varying vertical force

Science.gov (United States)

Takahashi, Toshimichi

2018-05-01

The tyre model which formerly developed by the author et al. and describes the tyre transient responses of side force and aligning moment under the time-varying vertical force was implemented to the vehicle dynamics simulation software and the influence of tyre side force transient property on the vehicle behaviour was investigated. The vehicle responses with/without tyre transient property on sinusoidally undulated road surfaces were simulated and compared. It was found that the average lateral acceleration of the vehicle at the sinusoidal steering wheel angle input decreases on the undulated road of long wavelength (3 m) for both cases, but when the wavelength becomes shorter (1 m), the average lateral acceleration increases only in the case that the transient property is considered. The cause of those changes is explained by using the tyre-related variables. Also the steady-state turning behaviour of the vehicle on undulated roads are shown and discussed.

Ultimately short ballistic vertical graphene Josephson junctions

Science.gov (United States)

Lee, Gil-Ho; Kim, Sol; Jhi, Seung-Hoon; Lee, Hu-Jong

2015-01-01

Much efforts have been made for the realization of hybrid Josephson junctions incorporating various materials for the fundamental studies of exotic physical phenomena as well as the applications to superconducting quantum devices. Nonetheless, the efforts have been hindered by the diffusive nature of the conducting channels and interfaces. To overcome the obstacles, we vertically sandwiched a cleaved graphene monoatomic layer as the normal-conducting spacer between superconducting electrodes. The atomically thin single-crystalline graphene layer serves as an ultimately short conducting channel, with highly transparent interfaces with superconductors. In particular, we show the strong Josephson coupling reaching the theoretical limit, the convex-shaped temperature dependence of the Josephson critical current and the exceptionally skewed phase dependence of the Josephson current; all demonstrate the bona fide short and ballistic Josephson nature. This vertical stacking scheme for extremely thin transparent spacers would open a new pathway for exploring the exotic coherence phenomena occurring on an atomic scale. PMID:25635386

Vertical structure and microphysical characteristics of precipitation on the high terrain and lee side of the Olympic Mountains

Science.gov (United States)

Zagrodnik, J. P.; McMurdie, L. A.; Houze, R.

2017-12-01

As mid-latitude cyclones pass over coastal mountain ranges, the processes producing their clouds and precipitation are modified when they encounter complex terrain, leading to a maximum in precipitation fallout on the windward slopes and a minimum on the lee side. The precipitation that does reach the high terrain and lee side of a mountain range can be theoretically determined by a complex interaction between the dynamics of air lifting over the terrain, the thermodynamics of moist air, and the microphysical time required to grow particles large enough to fall out. To date, there have been few observational studies that have focused on the nonlinear microphysical processes contributing to the variability of precipitation that is received on the lee side slopes of a mountain range such as the Olympic Mountains. The 2015-16 Olympic Mountains Experiment (OLYMPEX) collected unprecedented observations on the high terrain and lee side of the Olympic Mountains including frequent soundings on Vancouver Island, dual-polarization Doppler radar, multi-frequency airborne radar, and ground-based particle size and crystal habit observations at the higher elevation Hurricane Ridge site. We utilize these observations to examine the evolution of the vertical structure and microphysical precipitation characteristics over the high terrain and leeside within the context of large-scale dynamic and thermodynamic conditions that evolve during the passage of cold season mid-latitude cyclones. The primary goal is to determine the degree to which the observed variability in lee side precipitation amount and microphysical properties are controlled by variations in temperature, flow speed and direction, shear, and stability associated with characteristic synoptic storm sectors and frontal passages.

Living transparency : The development of access to documents in the Council of the EU and its democratic implications

NARCIS (Netherlands)

Hillebrandt, M.Z.

2017-01-01

In and around the Council of the European Union all agree on the need for transparency in order for it function democratically. Twenty-five years after the introduction of a transparency policy different sides however disagree about the extent to which such transparency has in fact been achieved.

On-chip plasmon-induced transparency based on plasmonic coupled nanocavities.

Science.gov (United States)

Zhu, Yu; Hu, Xiaoyong; Yang, Hong; Gong, Qihuang

2014-01-17

On-chip plasmon-induced transparency offers the possibility of realization of ultrahigh-speed information processing chips. Unfortunately, little experimental progress has been made to date because it is difficult to obtain on-chip plasmon-induced transparency using only a single meta-molecule in plasmonic circuits. Here, we report a simple and efficient strategy to realize on-chip plasmon-induced transparency in a nanoscale U-shaped plasmonic waveguide side-coupled nanocavity pair. High tunability in the transparency window is achieved by covering the pair with different organic polymer layers. It is possible to realize ultrafast all-optical tunability based on pump light-induced refractive index change of a graphene cover layer. Compared with previous reports, the overall feature size of the plasmonic nanostructure is reduced by more than three orders of magnitude, while ultrahigh tunability of the transparency window is maintained. This work also provides a superior platform for the study of the various physical effects and phenomena of nonlinear optics and quantum optics.

Continuous, Highly Flexible, and Transparent Graphene Films by Chemical Vapor Deposition for Organic Photovoltaics

KAUST Repository

Gomez De Arco, Lewis

2010-05-25

We report the implementation of continuous, highly flexible, and transparent graphene films obtained by chemical vapor deposition (CVD) as transparent conductive electrodes (TCE) in organic photovoltaic cells. Graphene films were synthesized by CVD, transferred to transparent substrates, and evaluated in organic solar cell heterojunctions (TCE/poly-3,4- ethylenedioxythiophene:poly styrenesulfonate (PEDOT:PSS)/copper phthalocyanine/fullerene/bathocuproine/aluminum). Key to our success is the continuous nature of the CVD graphene films, which led to minimal surface roughness (∼ 0.9 nm) and offered sheet resistance down to 230 Ω/sq (at 72% transparency), much lower than stacked graphene flakes at similar transparency. In addition, solar cells with CVD graphene and indium tin oxide (ITO) electrodes were fabricated side-by-side on flexible polyethylene terephthalate (PET) substrates and were confirmed to offer comparable performance, with power conversion efficiencies (η) of 1.18 and 1.27%, respectively. Furthermore, CVD graphene solar cells demonstrated outstanding capability to operate under bending conditions up to 138°, whereas the ITO-based devices displayed cracks and irreversible failure under bending of 60°. Our work indicates the great potential of CVD graphene films for flexible photovoltaic applications. © 2010 American Chemical Society.

Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics.

Science.gov (United States)

Gomez De Arco, Lewis; Zhang, Yi; Schlenker, Cody W; Ryu, Koungmin; Thompson, Mark E; Zhou, Chongwu

2010-05-25

We report the implementation of continuous, highly flexible, and transparent graphene films obtained by chemical vapor deposition (CVD) as transparent conductive electrodes (TCE) in organic photovoltaic cells. Graphene films were synthesized by CVD, transferred to transparent substrates, and evaluated in organic solar cell heterojunctions (TCE/poly-3,4-ethylenedioxythiophene:poly styrenesulfonate (PEDOT:PSS)/copper phthalocyanine/fullerene/bathocuproine/aluminum). Key to our success is the continuous nature of the CVD graphene films, which led to minimal surface roughness ( approximately 0.9 nm) and offered sheet resistance down to 230 Omega/sq (at 72% transparency), much lower than stacked graphene flakes at similar transparency. In addition, solar cells with CVD graphene and indium tin oxide (ITO) electrodes were fabricated side-by-side on flexible polyethylene terephthalate (PET) substrates and were confirmed to offer comparable performance, with power conversion efficiencies (eta) of 1.18 and 1.27%, respectively. Furthermore, CVD graphene solar cells demonstrated outstanding capability to operate under bending conditions up to 138 degrees , whereas the ITO-based devices displayed cracks and irreversible failure under bending of 60 degrees . Our work indicates the great potential of CVD graphene films for flexible photovoltaic applications.

Lattice Transparency of Graphene.

Science.gov (United States)

Chae, Sieun; Jang, Seunghun; Choi, Won Jin; Kim, Youn Sang; Chang, Hyunju; Lee, Tae Il; Lee, Jeong-O

2017-03-08

Here, we demonstrated the transparency of graphene to the atomic arrangement of a substrate surface, i.e., the "lattice transparency" of graphene, by using hydrothermally grown ZnO nanorods as a model system. The growth behaviors of ZnO nanocrystals on graphene-coated and uncoated substrates with various crystal structures were investigated. The atomic arrangements of the nucleating ZnO nanocrystals exhibited a close match with those of the respective substrates despite the substrates being bound to the other side of the graphene. By using first-principles calculations based on density functional theory, we confirmed the energetic favorability of the nucleating phase following the atomic arrangement of the substrate even with the graphene layer present in between. In addition to transmitting information about the atomic lattice of the substrate, graphene also protected its surface. This dual role enabled the hydrothermal growth of ZnO nanorods on a Cu substrate, which otherwise dissolved in the reaction conditions when graphene was absent.

ZnO nanorods for simultaneous light trapping and transparent electrode application in solar cells

KAUST Repository

Khan, Yasser

2011-10-01

Efficacy of using vertically grown ZnO nanorod array in enhancing electromagnetic field intensity and serving as the top contact layer (transparent electrodes) for solar cells was investigated. © 2011 IEEE.

Interference Lithography for Vertical Photovoltaics

Science.gov (United States)

Balls, Amy; Pei, Lei; Kvavle, Joshua; Sieler, Andrew; Schultz, Stephen; Linford, Matthew; Vanfleet, Richard; Davis, Robert

2009-10-01

We are exploring low cost approaches for fabricating three dimensional nanoscale structures. These vertical structures could significantly improve the efficiency of devices made from low cost photovoltaic materials. The nanoscale vertical structure provides a way to increase optical absorption in thin photovoltaic films without increasing the electronic carrier separation distance. The target structure is a high temperature transparent template with a dense array of holes on a 400 - 600 nm pitch fabricated by a combination of interference lithography and nanoembossing. First a master was fabricated using ultraviolet light interference lithography and the pattern was transferred into a silicon wafer master by silicon reactive ion etching. Embossing studies were performed with the master on several high temperature polymers.

Retrieving Vertical Air Motion and Raindrop Size Distributions from Vertically Pointing Doppler Radars

Science.gov (United States)

Williams, C. R.; Chandra, C. V.

2017-12-01

The vertical evolution of falling raindrops is a result of evaporation, breakup, and coalescence acting upon those raindrops. Computing these processes using vertically pointing radar observations is a two-step process. First, the raindrop size distribution (DSD) and vertical air motion need to be estimated throughout the rain shaft. Then, the changes in DSD properties need to be quantified as a function of height. The change in liquid water content is a measure of evaporation, and the change in raindrop number concentration and size are indicators of net breakup or coalescence in the vertical column. The DSD and air motion can be retrieved using observations from two vertically pointing radars operating side-by-side and at two different wavelengths. While both radars are observing the same raindrop distribution, they measure different reflectivity and radial velocities due to Rayleigh and Mie scattering properties. As long as raindrops with diameters greater than approximately 2 mm are in the radar pulse volumes, the Rayleigh and Mie scattering signatures are unique enough to estimate DSD parameters using radars operating at 3- and 35-GHz (Williams et al. 2016). Vertical decomposition diagrams (Williams 2016) are used to explore the processes acting on the raindrops. Specifically, changes in liquid water content with height quantify evaporation or accretion. When the raindrops are not evaporating, net raindrop breakup and coalescence are identified by changes in the total number of raindrops and changes in the DSD effective shape as the raindrops. This presentation will focus on describing the DSD and air motion retrieval method using vertical profiling radar observations from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility in Northern Oklahoma.

Detuned-resonator induced transparency in dielectric-loaded plasmonic waveguides

DEFF Research Database (Denmark)

Han, Zhanghua; García Ortíz, César Eduardo; Radko, Ilya P.

2013-01-01

We report on the experimental demonstration of detuned-resonator induced transparency in the near-infrared (∼800  nm) using two detuned racetrack resonators side-coupled to a bus waveguide. Both resonators and the bus waveguide are in the form of dielectric-loaded surface plasmon polariton...

Asymmetric photoelectric property of transparent TiO2 nanotube films loaded with Au nanoparticles

International Nuclear Information System (INIS)

Wang, Hui; Liang, Wei; Liu, Yiming; Zhang, Wanggang; Zhou, Diaoyu; Wen, Jing

2016-01-01

Highlights: • Highly transparent films of TiO 2 nanotube arrays were directly fabricated on FTO glasses. • Semitransparent TNT-Au composite films were obtained and exhibited excellent photoelectrocatalytic ability. • Back-side of TNT-Au composite films was firstly irradiated and tested to compare with front-side of films. - Abstract: Semitransparent composite films of Au loaded TiO 2 nanotubes (TNT-Au) were prepared by sputtering Au nanoparticles on highly transparent TiO 2 nanotubes films, which were fabricated directly on FTO glasses by anodizing the Ti film sputtered on the FTO glasses. Compared with pure TNT films, the prepared TNT-Au films possessed excellent absorption ability and high photocurrent response and improved photocatalytic activity under visible-light irradiation. It could be concluded that Au nanoparticles played important roles in improving the photoelectrochemical performance of TNT-Au films. Moreover, in this work, both sides of TNT-Au films were researched and compared owing to theirs semitransparency. It was firstly found that the photoelectric activity of TNT-Au composite films with back-side illumination was obviously superior to front-side illumination.

Nitrogen-doped graphene as transparent counter electrode for efficient dye-sensitized solar cells

International Nuclear Information System (INIS)

Wang, Guiqiang; Fang, Yanyan; Lin, Yuan; Xing, Wei; Zhuo, Shuping

2012-01-01

Graphical abstract: Display Omitted Highlights: ► NG sheets are prepared through a hydrothermal reduction of graphite oxide. ► The transparent NG counter electrodes of DSCs are fabricated at room temperature. ► Transparent NG electrode exhibits excellent catalytic activity for the reduction of I 3 − . ► The DSC with NG electrode achieves a comparable efficiency to that of the Pt-based cell. ► The efficiency of rear illumination is about 85% that of front illumination. -- Abstract: Nitrogen-doped graphene sheets are prepared through a hydrothermal reduction of graphite oxide in the presence of ammonia and applied to fabricate the transparent counter electrode of dye-sensitized solar cells. The atomic percentage of nitrogen in doped graphene sample is about 2.5%, and the nitrogen bonds display pyridine and pyrrole-like configurations. Cyclic voltammetry studies demonstrate a much higher electrocatalytic activity toward I − /I 3 − redox reaction for nitrogen-doped graphene, as compared with pristine graphene. The dye-sensitized solar cell with this transparent nitrogen-doped graphene counter electrode shows conversion efficiencies of 6.12% and 5.23% corresponding to front-side and rear-side illumination, respectively. Meanwhile, the cell with a Pt counter electrode shows a conversion efficiency of 6.97% under the same experimental condition. These promising results highlight the potential application of nitrogen-doped graphene in cost-effective, transparent dye-sensitized solar cells.

Highly efficient fully transparent inverted OLEDs

Science.gov (United States)

Meyer, J.; Winkler, T.; Hamwi, S.; Schmale, S.; Kröger, M.; Görrn, P.; Johannes, H.-H.; Riedl, T.; Lang, E.; Becker, D.; Dobbertin, T.; Kowalsky, W.

2007-09-01

One of the unique selling propositions of OLEDs is their potential to realize highly transparent devices over the visible spectrum. This is because organic semiconductors provide a large Stokes-Shift and low intrinsic absorption losses. Hence, new areas of applications for displays and ambient lighting become accessible, for instance, the integration of OLEDs into the windshield or the ceiling of automobiles. The main challenge in the realization of fully transparent devices is the deposition of the top electrode. ITO is commonly used as transparent bottom anode in a conventional OLED. To obtain uniform light emission over the entire viewing angle and a low series resistance, a TCO such as ITO is desirable as top contact as well. However, sputter deposition of ITO on top of organic layers causes damage induced by high energetic particles and UV radiation. We have found an efficient process to protect the organic layers against the ITO rf magnetron deposition process of ITO for an inverted OLED (IOLED). The inverted structure allows the integration of OLEDs in more powerful n-channel transistors used in active matrix backplanes. Employing the green electrophosphorescent material Ir(ppy) 3 lead to IOLED with a current efficiency of 50 cd/A and power efficiency of 24 lm/W at 100 cd/m2. The average transmittance exceeds 80 % in the visible region. The on-set voltage for light emission is lower than 3 V. In addition, by vertical stacking we achieved a very high current efficiency of more than 70 cd/A for transparent IOLED.

Vertical MoSe2-MoO x p-n heterojunction and its application in optoelectronics

Science.gov (United States)

Chen, Xiaoshuang; Liu, Guangbo; Hu, Yunxia; Cao, Wenwu; Hu, PingAn; Hu, Wenping

2018-01-01

The hybrid n-type 2D transition-metal dichalcogenide (TMD)/p-type oxide van der Waals (vdW) heterojunction nanosheets consist of 2D layered MoSe2 (the n-type 2D material) and MoO x (the p-type oxide) which are grown on SiO2/Si substrates for the first time via chemical vapor deposition technique, displaying the regular hexagon structures with the average length dimension of sides of ˜8 μm. Vertical MoSe2-MoO x p-n heterojunctions demonstrate obviously current-rectifying characteristic, and it can be tuned via gate voltage. What is more, the photodetector based on vertical MoSe2-MoO x heterojunctions displays optimal photoresponse behavior, generating the responsivity, detectivity, and external quantum efficiency to 3.4 A W-1, 0.85 × 108 Jones, and 1665.6%, respectively, at V ds = 5 V with the light wavelength of 254 nm under 0.29 mW cm-2. These results furnish a building block on investigating the flexible and transparent properties of vdW and further optimizing the structure of the devices for better optoelectronic and electronic performance.

Synthesis of ZnO tetrapods for flexible and transparent UV sensors

International Nuclear Information System (INIS)

Rackauskas, Simas; Mustonen, Kimmo; Järvinen, Terhi; Jiang, Hua; Kauppinen, Esko I; Nasibulin, Albert G; Mattila, Marco; Lipsanen, Harri; Klimova, Olga; Tolochko, Oleg

2012-01-01

ZnO tetrapods (ZnO-Ts) were synthesized in a vertical flow reactor by gas phase oxidation of Zn vapor in an air atmosphere. The morphology of the product was varied from nearly spherical nanoparticles to ZnO-Ts, together with the partial pressure of Zn and reaction temperature. MgO introduced during synthesis, increased the band gap, the optical transparency in the visible range, and also changed the ZnO-T structure. Fabricated flexible transparent UV sensors showed a 45-fold current increase under UV irradiation with an intensity of 30 μW cm −2 at a wavelength of 365 nm and response time of 0.9 s. (paper)

Transparency

DEFF Research Database (Denmark)

Flyverbom, Mikkel; Albu, Oana Brindusa

2017-01-01

Transparency is an increasingly prominent research topic in many scholarly disciplines and offers valuable insights for organizational communication. This entry provides an overview of the historical background and identifies some themes that presently inform the transparency literature. The entry...... then outlines the most important dimensions of the concept of transparency by highlighting two paradigmatic positions underpinning contemporary research in this area: namely, informational approaches that focus on the sharing of information and the perceived quality of that information and social process...... orientations that explore the dynamics of transparency in organizational settings. The entry highlights emergent methodological and conceptual insights concerning transparency as a dynamic and paradoxical social process with performative characteristics – an approach that remains underexplored....

Joint DOE-PNC research on the use of transparency in support of Nuclear Nonproliferation

International Nuclear Information System (INIS)

Mochiji, Toshiro; Tazaki, Makiko; Keeney, Robin; Puckett, John; Stanbro, William; Nakhleh, Charles

1998-01-01

PNC and LANL collaborated in research on the concept of transparency in nuclear nonproliferation. The research was based on the Action Sheet no.21, which was signed in February 1996, 'The Joint Research on 'Transparency' in Nuclear Nonproliferation' under the 'Agreement between the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) and the US Department of Energy (DOE) for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation.' The scope of the research was a fundamental study on transparency to clarify the means to improve worldwide acceptability of nuclear energy from a nuclear nonproliferation viewpoint. The research encompassed three main topics: the policy environment of transparency, the development of transparency options, and technical options for transparency. Each side performed independent research then joint workshops were held to exchange information and views. This paper summarizes the results of these workshops. (author)

All-solution processed semi-transparent perovskite solar cells with silver nanowires electrode

International Nuclear Information System (INIS)

Yang, Kaiyu; Li, Fushan; Zhang, Jianhua; Veeramalai, Chandrasekar Perumal; Guo, Tailiang

2016-01-01

In this work, we report an all-solution route to produce semi-transparent high efficiency perovskite solar cells (PSCs). Instead of an energy-consuming vacuum process with metal deposition, the top electrode is simply deposited by spray-coating silver nanowires (AgNWs) under room temperature using fabrication conditions and solvents that do not damage or dissolve the underlying PSC. The as-fabricated semi-transparent perovskite solar cell shows a photovoltaic output with dual side illuminations due to the transparency of the AgNWs. With a back cover electrode, the open circuit voltage increases significantly from 1.01 to 1.16 V, yielding high power conversion efficiency from 7.98 to 10.64%. (paper)

Scalable Inkjet-Based Structural Color Printing by Molding Transparent Gratings on Multilayer Nanostructured Surfaces.

Science.gov (United States)

Jiang, Hao; Kaminska, Bozena

2018-04-24

To enable customized manufacturing of structural colors for commercial applications, up-scalable, low-cost, rapid, and versatile printing techniques are highly demanded. In this paper, we introduce a viable strategy for scaling up production of custom-input images by patterning individual structural colors on separate layers, which are then vertically stacked and recombined into full-color images. By applying this strategy on molded-ink-on-nanostructured-surface printing, we present an industry-applicable inkjet structural color printing technique termed multilayer molded-ink-on-nanostructured-surface (M-MIONS) printing, in which structural color pixels are molded on multiple layers of nanostructured surfaces. Transparent colorless titanium dioxide nanoparticles were inkjet-printed onto three separate transparent polymer substrates, and each substrate surface has one specific subwavelength grating pattern for molding the deposited nanoparticles into structural color pixels of red, green, or blue primary color. After index-matching lamination, the three layers were vertically stacked and bonded to display a color image. Each primary color can be printed into a range of different shades controlled through a half-tone process, and full colors were achieved by mixing primary colors from three layers. In our experiments, an image size as big as 10 cm by 10 cm was effortlessly achieved, and even larger images can potentially be printed on recombined grating surfaces. In one application example, the M-MIONS technique was used for printing customizable transparent color optical variable devices for protecting personalized security documents. In another example, a transparent diffractive color image printed with the M-MIONS technique was pasted onto a transparent panel for overlaying colorful information onto one's view of reality.

Fabrication of Vertically Aligned Carbon Nanotube or Zinc Oxide Nanorod Arrays for Optical Diffraction Gratings.

Science.gov (United States)

Kim, Jeong; Kim, Sun Il; Cho, Seong-Ho; Hwang, Sungwoo; Lee, Young Hee; Hur, Jaehyun

2015-11-01

We report on new fabrication methods for a transparent, hierarchical, and patterned electrode comprised of either carbon nanotubes or zinc oxide nanorods. Vertically aligned carbon nanotubes or zinc oxide nanorod arrays were fabricated by either chemical vapor deposition or hydrothermal growth, in combination with photolithography. A transparent conductive graphene layer or zinc oxide seed layer was employed as the transparent electrode. On the patterned surface defined using photoresist, the vertically grown carbon nanotubes or zinc oxides could produce a concentrated electric field under applied DC voltage. This periodic electric field was used to align liquid crystal molecules in localized areas within the optical cell, effectively modulating the refractive index. Depending on the material and morphology of these patterned electrodes, the diffraction efficiency presented different behavior. From this study, we established the relationship between the hierarchical structure of the different electrodes and their efficiency for modulating the refractive index. We believe that this study will pave a new path for future optoelectronic applications.

A Study of Vertical Transport through Graphene toward Control of Quantum Tunneling.

Science.gov (United States)

Zhu, Xiaodan; Lei, Sidong; Tsai, Shin-Hung; Zhang, Xiang; Liu, Jun; Yin, Gen; Tang, Min; Torres, Carlos M; Navabi, Aryan; Jin, Zehua; Tsai, Shiao-Po; Qasem, Hussam; Wang, Yong; Vajtai, Robert; Lake, Roger K; Ajayan, Pulickel M; Wang, Kang L

2018-02-14

Vertical integration of van der Waals (vdW) materials with atomic precision is an intriguing possibility brought forward by these two-dimensional (2D) materials. Essential to the design and analysis of these structures is a fundamental understanding of the vertical transport of charge carriers into and across vdW materials, yet little has been done in this area. In this report, we explore the important roles of single layer graphene in the vertical tunneling process as a tunneling barrier. Although a semimetal in the lateral lattice plane, graphene together with the vdW gap act as a tunneling barrier that is nearly transparent to the vertically tunneling electrons due to its atomic thickness and the transverse momenta mismatch between the injected electrons and the graphene band structure. This is accentuated using electron tunneling spectroscopy (ETS) showing a lack of features corresponding to the Dirac cone band structure. Meanwhile, the graphene acts as a lateral conductor through which the potential and charge distribution across the tunneling barrier can be tuned. These unique properties make graphene an excellent 2D atomic grid, transparent to charge carriers, and yet can control the carrier flux via the electrical potential. A new model on the quantum capacitance's effect on vertical tunneling is developed to further elucidate the role of graphene in modulating the tunneling process. This work may serve as a general guideline for the design and analysis of vdW vertical tunneling devices and heterostructures, as well as the study of electron/spin injection through and into vdW materials.

Organizational Transparency

DEFF Research Database (Denmark)

Albu, Oana Brindusa; Flyverbom, Mikkel

2018-01-01

with the sharing of information and the perceived quality of the information shared. This narrow focus on information and quality, however, overlooks the dynamics of organizational transparency. To provide a more structured conceptualization of organizational transparency, this article unpacks the assumptions......Transparency is an increasingly prominent area of research that offers valuable insights for organizational studies. However, conceptualizations of transparency are rarely subject to critical scrutiny and thus their relevance remains unclear. In most accounts, transparency is associated...... that shape the extant literature, with a focus on three dimensions: conceptualizations, conditions, and consequences. The contribution of the study is twofold: (a) On a conceptual level, we provide a framework that articulates two paradigmatic positions underpinning discussions of transparency, verifiability...

Asymmetric photoelectric property of transparent TiO{sub 2} nanotube films loaded with Au nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Wang, Hui [College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, Shanxi 030024 (China); College of Applied Science, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024 (China); Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan, Shanxi 030024 (China); Liang, Wei, E-mail: 986903124@qq.com [College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, Shanxi 030024 (China); Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan, Shanxi 030024 (China); Liu, Yiming; Zhang, Wanggang; Zhou, Diaoyu; Wen, Jing [College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, Shanxi 030024 (China); Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan, Shanxi 030024 (China)

2016-11-15

Highlights: • Highly transparent films of TiO{sub 2} nanotube arrays were directly fabricated on FTO glasses. • Semitransparent TNT-Au composite films were obtained and exhibited excellent photoelectrocatalytic ability. • Back-side of TNT-Au composite films was firstly irradiated and tested to compare with front-side of films. - Abstract: Semitransparent composite films of Au loaded TiO{sub 2} nanotubes (TNT-Au) were prepared by sputtering Au nanoparticles on highly transparent TiO{sub 2} nanotubes films, which were fabricated directly on FTO glasses by anodizing the Ti film sputtered on the FTO glasses. Compared with pure TNT films, the prepared TNT-Au films possessed excellent absorption ability and high photocurrent response and improved photocatalytic activity under visible-light irradiation. It could be concluded that Au nanoparticles played important roles in improving the photoelectrochemical performance of TNT-Au films. Moreover, in this work, both sides of TNT-Au films were researched and compared owing to theirs semitransparency. It was firstly found that the photoelectric activity of TNT-Au composite films with back-side illumination was obviously superior to front-side illumination.

76 FR 1180 - FDA Transparency Initiative: Improving Transparency to Regulated Industry

Science.gov (United States)

2011-01-07

...] FDA Transparency Initiative: Improving Transparency to Regulated Industry AGENCY: Food and Drug... the Transparency Initiative, the Food and Drug Administration (FDA) is announcing the availability of a report entitled ``FDA Transparency Initiative: Improving Transparency to Regulated Industry.'' The...

Vertices in the abelized picture

International Nuclear Information System (INIS)

Embacher, F.

1990-01-01

Covariant vertices of open bosonic string theory are transformed to the abelized picture. The way the pure transverse (light-cone gauge) vertex is contained therein is exhibited explicitly. The formalism shows in a quite transparent way that all further content of a covariant vertex is of gauge type. By applying the transverse projection operator in the abelized picture, an algebraic condition whether a set of Neumann coefficients define a vertex for string theory is obtained. A speculation concerning field redefinitions in string field theory is added. (Author) 33 refs

Intra-oral electron therapy for carcinoma of the oral cavity using transparent acrylic tubes

International Nuclear Information System (INIS)

Terashima, Hiromi; Nakata, Hajime; Yoshiura, Takao; Ogawa, Masato; Yoshida, Akio; Ikemura, Kunio

1986-01-01

Intra-oral electron therapy for carcinoma of the oral cavity is a well-established treatment modality. However, the conventional metallic tubes were inconvenient to use because the irradiation field had to be confirmed by a side mirror. We devised transparent acrylic tubes which enable the positioning easy by confirming the tumor and irradiation field directry. Seven cases of various intra-oral carcinomas were treated with these new transparent acrylic tubes and good results were obtained. (author)

Numerical Simulation of Natural Convection in a Vertically Installed Wet Thermal Insulator

Energy Technology Data Exchange (ETDEWEB)

Bae, Youngmin; Kim, Seong H.; Seo, Jae K.; Kim, Young I. [KAERI, Daejeon (Korea, Republic of)

2016-05-15

Natural convection in an enclosure with disconnected vertical partitions inside is thought of as major concerns in the design of thermal insulators. For example, in a system-integrated modular advanced reactor (SMART), vertical partitions are disposed inside the so-called wet thermal insulator with gaps at the top and bottom ends to compensate for thermal expansion . In such a case, buoyancy driven flow circulates throughout the enclosure, i.e., fluid rises up in the hot-side layers, passing through the gap at the top, moving downward in the vertical channels near the cold side, and returning to the hot-side layers via the gap at the bottom. Compared with the case of connected partitions, this often causes an undesirable increase in the circulation flow rate and heat transfer within the enclosure, thus deteriorating the thermal insulation performance. In this study, laminar natural convection in a tall rectangular enclosure with disconnected vertical partitions inside is investigated numerically. The effects of main governing parameters such as the modified Rayleigh number, enclosure height to width ratio, and number of fluid layers are scrutinized along with a discussion of the heat transfer regimes. This study investigates the laminar natural convection in a tall rectangular enclosure having isothermal side walls of different temperatures and insulated top and bottom walls with disconnected vertical partitions inside.

Numerical Simulation of Natural Convection in a Vertically Installed Wet Thermal Insulator

International Nuclear Information System (INIS)

Bae, Youngmin; Kim, Seong H.; Seo, Jae K.; Kim, Young I.

2016-01-01

Natural convection in an enclosure with disconnected vertical partitions inside is thought of as major concerns in the design of thermal insulators. For example, in a system-integrated modular advanced reactor (SMART), vertical partitions are disposed inside the so-called wet thermal insulator with gaps at the top and bottom ends to compensate for thermal expansion . In such a case, buoyancy driven flow circulates throughout the enclosure, i.e., fluid rises up in the hot-side layers, passing through the gap at the top, moving downward in the vertical channels near the cold side, and returning to the hot-side layers via the gap at the bottom. Compared with the case of connected partitions, this often causes an undesirable increase in the circulation flow rate and heat transfer within the enclosure, thus deteriorating the thermal insulation performance. In this study, laminar natural convection in a tall rectangular enclosure with disconnected vertical partitions inside is investigated numerically. The effects of main governing parameters such as the modified Rayleigh number, enclosure height to width ratio, and number of fluid layers are scrutinized along with a discussion of the heat transfer regimes. This study investigates the laminar natural convection in a tall rectangular enclosure having isothermal side walls of different temperatures and insulated top and bottom walls with disconnected vertical partitions inside

Horizontal and Vertical Attentional Orienting in Parkinson's Disease

Science.gov (United States)

Nys, Gudrun M. S.; Santens, Patrick; Vingerhoets, Guy

2010-01-01

Patients with Parkinson's disease (PD) typically suffer from an asymmetric degeneration of dopaminergic cells in the substantia nigra, resulting in right-sided (RPD) or left-sided (LPD) predominance of motor symptomatology. As the dopaminergic system is also involved in attention, we examined horizontal and vertical orienting of attention in LPD…

Efficient outdoor performance of esthetic bifacial a-Si:H semi-transparent PV modules

International Nuclear Information System (INIS)

Myong, Seung Yeop; Jeon, Sang Won

2016-01-01

Highlights: • 1.43 m"2 a-Si:H semi-transparent PV modules with emotionally inoffensive and esthetically pleasing colors are developed. • Seasonal outdoor performance of the developed colorful PV modules is measured and simulated. • The bifacial TBC a-Si:H semi-transparent PV module performs at a superior annual electrical energy output. • An impressive performance ratio of 124.5% is achieved by surpassing a simulated prediction considerably. - Abstract: We developed bifacial transparent back contact (TBC) hydrogenated amorphous silicon (a-Si:H) semi-transparent glass-to-glass photovoltaic (PV) modules with emotionally inoffensive and esthetically pleasing colors have been developed by combining the transparent back contact and color of the back glass. Due to the high series resistance of the transparent back contact, the bifacial TBC a-Si:H semi-transparent PV modules had a lower rated power after light soaking than the monofacial opaque (metal) back contact (OBC) a-Si:H semi-transparent PV modules fabricated using the additional laser scribing patterns. However, the TBC a-Si:H semi-transparent PV module produced a higher annual electrical energy output than the OBC a-Si:H semi-transparent PV module thanks to bifacial power generation during the outdoor field test. In particular, the performance ratio of the TBC a-Si:H semi-transparent PV module measured at the optimal tilt angle of 30° surpassed its simulated prediction by a drastically high value of 124.5%. At a higher tilt angle of 85°, bifacial power generation produced a higher deviation between the measured and simulated annual performance of the TBC a-Si:H semi-transparent PV module. Since the reflected albedo has a tendency to increase toward higher tilt angles, bifacial power generation can compensate for the loss of lower direct plane-of-array irradiation at a higher tilt angle. Therefore, the TBC a-Si:H semi-transparent PV module is suitable for the vertically mounted building integrated

Analogue of electromagnetically-induced-transparency based on graphene nanotube waveguide

International Nuclear Information System (INIS)

Wei, Buzheng; Jian, Shuisheng

2017-01-01

A graphene-based nanotube waveguide system is proposed and designed to realize the analogue of electromagnetically-induced-transparency. The two nanotubes act as side coupled cavity rings which can be treated as the bright and dark resonators. By mimicking the quantum nonlinear optical interference, the light at resonant frequency makes the opaque system transparent. Conveniently, the working transparency window can be dynamically controlled by shifting the Fermi energy level of graphene without refabricating the device. Furthermore, the shape of the transmission spectrum can be tuned either by adjusting the waveguide coupling distance or by the cavity ring coupling distance. If the ring radius gets bigger, higher order of modes are excited in the dark resonator consequently. Meaningfully, the light travels at resonant frequency can be efficiently slowed down and the highest group delay reaches 25 ps. In the end, some concerns about the practical realization of such device are discussed. The structure may find potential applications in nano technology or light storage field. (paper)

Peering into Transparency

DEFF Research Database (Denmark)

Christensen, Lars Thøger; Cheney, George

2015-01-01

organizational effectiveness and widened democratic practice. Yet, with its most common operationalization, as information, transparency reinstalls a 'purified' notion of communication devoid of mystery, inaccuracy, and (mis)representation. We apply transparency to itself by unpacking its implicit model......The current emphasis on organizational transparency signifies a growing demand for insight, clarity, accountability, and participation. Holding the promise of improved access to valid and trustworthy knowledge about organizations, the transparency pursuit has great potential for enhanced...... of communication and critiquing its obliviousness to the representative nature of transparency-related messages and the attendant complexities of motivation. This critique interrogates the ambiguities and ambivalence of the transparency pursuit and demonstrates how the goals of organizational transparency...

Joint DOE-PNC research on the use of transparency in support of nuclear nonproliferation

International Nuclear Information System (INIS)

Mochiji, Toshiro; Keeney, R.; Tazaki, Makiko; Nakhleh, C.; Puckett, J.; Stanbro, W.

1999-01-01

PNC and LANL collaborated in research on the concept of transparency in nuclear nonproliferation. The research was based on the Action Sheet No. 21, which was signed in February 1996, ''The Joint Research on Transparency in Nuclear Nonproliferation'' under the ''Agreement between the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) and the US Department of Energy (DOE) for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation''. The purpose of Action Sheet 21 is to provide a fundamental study on Transparency to clarify the means to improve worldwide acceptability for the nuclear energy from the nuclear nonproliferation point of view. This project consists of independent research and then joint discussion at workshops that address a series of topics and issues in transparency. The activities covered in Action Sheet 21 took place over a period of 18 months. Three workshops were held; the first and the third hosted by PNC in Tokyo, Japan and the second hosted by LANL in Los Alamos, New Mexico, US. The following is a summary of the three workshops. The first workshop addressed the policy environment of transparency. Each side presented its perspective on the following issues: (1) a definition of transparency, (2) reasons for transparency, (3) detailed goals of transparency and (4) obstacles to transparency. The topic of the second workshop was ''Development of Transparency Options.'' The activities accomplished were (1) identify type of facilities where transparency might be applied, (2) define criteria for applying transparency, and (3) delineate applicable transparency options. The goal of the third workshop, ''Technical Options for Transparency,'' was to (1) identify conceptual options for transparency system design; (2) identify instrumentation, measurement, data collection and data processing options; (3) identify data display options; and (4) identify technical

Illusionary Transparency? Oil Revenues, Information Disclosure, and Transparency

OpenAIRE

Ofori, Jerome Jeffison; Lujala, Päivi

2015-01-01

xperience shows that discovery of valuable natural resources can become a curse rather than a blessing, and transparency has been identified as key to better resource governance because it can limit opportunities for corruption and mismanagement. This article shows that information disclosure, in which many governments and donor institutions engage, does not automatically translate into transparency. Ghana has embedded transparency as one of its key principles in oil management. However, fiel...

Transparency

DEFF Research Database (Denmark)

Flyverbom, Mikkel

2016-01-01

This article challenges the view of transparency as a matter of providing openness, insight, and clarity by conceptualizing it as a form of visibility management. We tend to think of transparency as a process of ensuring accountability through the timely and public disclosure of information...

Injection molding of micro pillars on vertical side walls using polyether-ether-ketone (PEEK)

DEFF Research Database (Denmark)

Zhang, Yang; Hansen, Hans Nørgaard; Sørensen, Søren

2016-01-01

This paper investigates the replication of microstructures on a vertical wall by PEEK injection molding. A 4-cavity insert was used in the injection molding. Pre-fabricated nickel plates with ø 4 μm micro holes on the surface were glued on vertical walls in the cavities. 3 cavities were coated by...

Analysis of the Structure of Vertical Combdrives of Fast Scanning Micromirrors

Science.gov (United States)

Wada, Hiroyuki

2004-04-01

The advantages of the fast scanning micromirror above vertical combdrives (bottom type) fabricated by the self-alignment process are reported. The fill factor of the bottom type was larger than that of a fast scanning micromirror beside vertical combdrives (side type) fabricated previously. The maximum tilt angle of the bottom type was larger than that of the side type. The probability of the failure mode at applied high voltage and the narrow gap between the upper and lower comb teeth (snap down) of the bottom type was lower than that of the side type. A bottom-type fast scanning micromirror the resonant frequency of which was 50.8 kHz was fabricated.

Lift on side by side intruders of various geometries within a granular flow

Science.gov (United States)

Acevedo-Escalante, M. F.; Caballero-Robledo, G. A.

2017-06-01

Obstacles within fluids have been widely used in engineering and in physics to study hydrodynamic interactions. In granular matter, objects within a granular flow have helped to understand fundamental features of drag and lift forces. In our group, we have studied numerically the flow mediated interaction between two static disks within a vertical granular flow in a two-dimensional container where the flow velocity and the distance between obstacles were varied. Attractive and repulsive forces were found depending on flow velocity and separation between intruders. The simulations evidenced a relationship between the average flow velocity in a specific section ahead of the obstacles and the attractive-repulsive lift. On the other hand, it was showed that the lift force on an object dragged within a granular medium depends on the shape of the intruder. Here we present experimental results of the interaction between two side-by-side intruders of different shapes within a vertical granular flow. We built a quasi-two-dimensional container in which we placed the intruders and using load cells we measured lift and drag forces during the discharge process for different flow velocities.

Transparency in Organizing

DEFF Research Database (Denmark)

Albu, Oana Brindusa

This dissertation provides a critical analysis of transparency in the context of organizing. The empirical material is based on qualitative studies of international cooperative organizations. The dissertation seeks to contribute to transparency and organizing scholarship by adopting a communication...... centred approach to explore the implications of pursuing ideals of transparency in organizational relationships. The dissertation is comprised of four papers each contributing to extant debates in organizational studies and transparency literature. The findings indicate that transparency, in contrast...... to being a solution for efficiency and democratic organizing, is a communicatively contested process which may lead to unintended consequences. The dissertation shows that transparency is performative: it can impact authority by de/legitimating action, shape the processes of organizational identity co...

Graphene and PbS quantum dot hybrid vertical phototransistor

Science.gov (United States)

Song, Xiaoxian; Zhang, Yating; Zhang, Haiting; Yu, Yu; Cao, Mingxuan; Che, Yongli; Dai, Haitao; Yang, Junbo; Ding, Xin; Yao, Jianquan

2017-04-01

A field-effect phototransistor based on a graphene and lead sulfide quantum dot (PbS QD) hybrid in which PbS QDs are embedded in a graphene matrix has been fabricated with a vertical architecture through a solution process. The n-type Si/SiO2 substrate (gate), Au/Ag nanowire transparent source electrode, active layer and Au drain electrode are vertically stacked in the device, which has a downscaled channel length of 250 nm. Photoinduced electrons in the PbS QDs leap into the conduction band and fill in the trap states, while the photoinduced holes left in the valence band transfer to the graphene and form the photocurrent under biases from which the photoconductive gain is evaluated. The graphene/QD-based vertical phototransistor shows a photoresponsivity of 2 × 103 A W-1, and specific detectivity up to 7 × 1012 Jones under 808 nm laser illumination with a light irradiance of 12 mW cm-2. The solution-processed vertical phototransistor provides a new facile method for optoelectronic device applications.

Combined VIS-IR spectrometer with vertical probe beam

Science.gov (United States)

Protopopov, V.

2017-12-01

A prototype of a combined visible-infrared spectrometer with a vertical probe beam is designed and tested. The combined spectral range is 0.4-20 μ with spatial resolution 1 mm. Basic features include the ability to measure both visibly transparent and opaque substances, as well as buried structures, such as in semiconductor industry; horizontal orientation of a sample, including semiconductor wafers; and reflection mode of operation, delivering twice the sensitivity compared to the transmission mode.

Near-unity transparency of a continuous metal film via cooperative effects of double plasmonic arrays

International Nuclear Information System (INIS)

Liu Zhengqi; Liu Guiqiang; Liu Xiaoshan; Huang Kuan; Chen Yuanhao; Fu Guolan; Zhou Haiqing

2013-01-01

Metal structures with high optical transparency and conductivity are of great importance for practical applications in optoelectronic devices. Here we investigate the transparency response of a continuous metal film sandwiched by double plasmonic nanoparticle arrays. The upper nanoparticle array shows efficient light trapping of the incident field, acting as a light input coupler, and the lower nanoparticle array shows a light release gate opening at the other side, acting as the light output coupler. The strong near-field light–matter interactions of the nano-scale separated plasmonic nanoparticles, the excitation of surface plasmon waves of the metal film, and their cooperative coupling effects result in broadband scattering cancellation and near-unity transparency (up to 96%) in the optical regime. The transparency response in such a structure can be efficiently modified by varying the gap distance of adjacent nanoparticles, dielectric environments, and the distance between the plasmonic array and the metal film. This motif may provide a new alternative approach to obtain transparent and highly conducting metal structures with potential applications in transparent conductors, plasmonic filters, and highly integrated light input and output components. (paper)

Transparent lithium-ion batteries

KAUST Repository

Yang, Y.

2011-07-25

Transparent devices have recently attracted substantial attention. Various applications have been demonstrated, including displays, touch screens, and solar cells; however, transparent batteries, a key component in fully integrated transparent devices, have not yet been reported. As battery electrode materials are not transparent and have to be thick enough to store energy, the traditional approach of using thin films for transparent devices is not suitable. Here we demonstrate a grid-structured electrode to solve this dilemma, which is fabricated by a microfluidics-assisted method. The feature dimension in the electrode is below the resolution limit of human eyes, and, thus, the electrode appears transparent. Moreover, by aligning multiple electrodes together, the amount of energy stored increases readily without sacrificing the transparency. This results in a battery with energy density of 10 Wh/L at a transparency of 60%. The device is also flexible, further broadening their potential applications. The transparent device configuration also allows in situ Raman study of fundamental electrochemical reactions in batteries.

Transparent lithium-ion batteries

Science.gov (United States)

Yang, Yuan; Jeong, Sangmoo; Hu, Liangbing; Wu, Hui; Lee, Seok Woo; Cui, Yi

2011-01-01

Transparent devices have recently attracted substantial attention. Various applications have been demonstrated, including displays, touch screens, and solar cells; however, transparent batteries, a key component in fully integrated transparent devices, have not yet been reported. As battery electrode materials are not transparent and have to be thick enough to store energy, the traditional approach of using thin films for transparent devices is not suitable. Here we demonstrate a grid-structured electrode to solve this dilemma, which is fabricated by a microfluidics-assisted method. The feature dimension in the electrode is below the resolution limit of human eyes, and, thus, the electrode appears transparent. Moreover, by aligning multiple electrodes together, the amount of energy stored increases readily without sacrificing the transparency. This results in a battery with energy density of 10 Wh/L at a transparency of 60%. The device is also flexible, further broadening their potential applications. The transparent device configuration also allows in situ Raman study of fundamental electrochemical reactions in batteries. PMID:21788483

TRANSPARENT CONCRETE

OpenAIRE

Sandeep Sharma*, Dr. O.P. Reddy

2017-01-01

Transparent concrete is the new type of concrete introduced in todays world which carries special property of light transmitting due to presence of light Optical fibres. Which is also known as translucent concrete or light transmitting concrete, it is achieved by replacing coarse aggregates with transparent alternate materials (Optical fibres). The binding material in transparent concrete may be able to transmit light by using clear resins the concrete mix. The concrete used in industry in pr...

The art of transparency.

Science.gov (United States)

Sayim, Bilge; Cavanagh, Patrick

2011-01-01

Artists throughout the ages have discovered a number of techniques to depict transparency. With only a few exceptions, these techniques follow closely the properties of physical transparency. The two best known properties are X-junctions and the luminance relations described by Metelli. X-junctions are seen where the contours of a transparent material cross contours of the surface behind; Metelli's constraints on the luminance relations between the direct and filtered portions of the surface specify a range of luminance values that are consistent with transparency. These principles have been used by artists since the time of ancient Egypt. However, artists also discovered that stimuli can be seen as transparent even when these physical constraints are not met. Ancient Greek artists, for example, were able to depict transparent materials in simple black-and-white line drawings. Artists also learned how to represent transparency in cases where neither X-junctions nor Metelli's constraints could apply: for example, where no portions of the objects behind the transparent material extend beyond it. Many painters convincingly portrayed transparency in these cases by depicting the effects the transparent medium would have on material or object properties. Here, we show how artists employed these and other techniques revealing their anticipation of current formalizations of perceived transparency, and we suggest new, as-yet-untested principles.

A Study of UV Spectral Transmission Through Different Transparent Media with Spectrophotometer

Directory of Open Access Journals (Sweden)

R B Gadgil

1981-01-01

Full Text Available This experiment was carried out with the help of spectrophotometer using an artificial UV light source to find -out the percentage transmission of UVA and UVB regions of the UV spectrum. The aim of the experiment was to select the transparent medium which would block mum UVB at the same time allowing mammum UVA to pass through thus reducing the unwanted side effects of UVB light and reducing the efficacy of PUVASOL. It was observed that an ordinary plain 3.3 mm colorless glass was the best transparent medium and with its use a simple solarium could be constructed to treat patients on PUVASOL with sunlight as the source of UV light.

Peering into Transparency

DEFF Research Database (Denmark)

Christensen, Lars Thøger; Cheney, George

and trustworthy knowledge about contemporary organizations, the transparency discourse has significant democratic potential. Yet, its most common operationalization – as information availability – reinstalls a “purified” notion of communication devoid of mystery, inaccuracy and misrepresentation. In this paper......The current emphasis on organizational and institutional transparency – driven by NGOs, inquisitive media, critical investors and other engaged stakeholders – signifies a growing demand for insight, clarity, participation and democracy. Holding the promise of improved access to valid......, we apply transparency to itself by unpacking its implicit model of communication and critiquing its ignorance towards the representative nature of current transparency practices. The critique unfolds the ambiguous nature of the transparency pursuit and demonstrates how its desire for insight, clarity...

PowerShades. Transparent photovoltaics and solar shading. Final report

Energy Technology Data Exchange (ETDEWEB)

Bezzel, E. (PhotoSolar ApS, Taastrup (Denmark)); Univ. of Neuchatel, Institute of Microtechnology, Neuchatel (CH)); Savcor Denmark A/S, Ballerup (Denmark)); Chem-Tec Plating A/S, Uldum (Denmark)); Danish Technological Institute (DTI), Taastrup (Denmark))

2008-06-15

This report marks the end of the PSO funded R and D project PowerShades. The objective of the project has been to establish knowledge about the manufacturing of PowerShade transparent photovoltaics and to demonstrate the viability of PowerShade, both as a product and when considered a building element. It has not been the objective to demonstrate a full-scale manufacturing of PowerShade, but to establish the knowledge that enables industrial manufacturing. The overall objective of the project has been achieved, and the large majority of the milestones defined have been met to full extent. It has been shown that PowerShade photovoltaic cells with an electrical efficiency of 5% can be reached, and it is expected that future work will lead to even better efficiency. Also, it has been demonstrated by full size side by side comparison that PowerShade transparent photovoltaics may replace exterior solar shading devices without compromise to the thermal properties of the building. The project has identified a number of work areas that must be addressed before an industrial manufacturing can be established. The efficiency of the photovoltaic generator must be increased and the stability of the entire product documented. Also, some of the identified processing steps must be scaled in capacity before manufacturing can be considered. (author)

Rapid, high-fluence multi-pass q-switched laser treatment of tattoos with a transparent perfluorodecalin-infused patch: A pilot study.

Science.gov (United States)

Biesman, Brian S; O'Neil, Michael P; Costner, Cara

2015-10-01

Perfluorodecalin (PFD) has previously been shown to rapidly dissipate the opaque, white micro-bubble layer formed after exposure of tattoos to Q-switched lasers [1]. The current pilot study was conducted to qualitatively determine if the use of a transparent PFD-infused silicone patch would result in more rapid clearance of tattoos than conventional through-air techniques. Black or dark blue tattoos were divided into two halves in a single-site IRB-approved study with 17 subjects with Fitzpatrick skin types I-III. One half of each tattoo served as its own control and was treated with one pass of a standard Q-switched Alexandrite laser (755 nm). The other half of the tattoo was treated directly through a transparent perfluorodecalin (PFD) infused patch (ON Light Sciences, Dublin, CA). The rapid whitening reduction effect of the Patch routinely allowed three to four laser passes in a total of approximately 5 minutes. Both sides were treated at highest tolerated fluence, but the optical clearing, index-matching, and epidermal protection properties of the PFD Patch allowed significantly higher fluence compared to the control side. Standard photographs were taken at baseline, immediately prior to treatment with the PFD Patch in place, and finally before and after each treatment session. Treatments were administered at 4- to 6-week intervals. In a majority of subjects (11 of 17), tattoos treated through a transparent PFD-infused patch showed more rapid tattoo clearance with higher patient and clinician satisfaction than conventional treatment. In no case did the control side fade faster than the PFD Patch side. No unanticipated adverse events were observed. Rapid multi-pass treatment of tattoos with highest tolerated fluence facilitated by a transparent PFD-infused patch clears tattoos more rapidly than conventional methods. © 2015 Wiley Periodicals, Inc.

Plasmonic transparent conductors

Science.gov (United States)

Liapis, Andreas C.; Sfeir, Matthew Y.; Black, Charles T.

2016-09-01

Many of today's technological applications, such as solar cells, light-emitting diodes, displays, and touch screens, require materials that are simultaneously optically transparent and electrically conducting. Here we explore transparent conductors based on the excitation of surface plasmons in nanostructured metal films. We measure both the optical and electrical properties of films perforated with nanometer-scale features and optimize the design parameters in order to maximize optical transmission without sacrificing electrical conductivity. We demonstrate that plasmonic transparent conductors can out-perform indium tin oxide in terms of both their transparency and their conductivity.

Electron detachment of the hydrogen-bonded amino acid side-chain guanine complexes

Science.gov (United States)

Wang, Jing; Gu, Jiande; Leszczynski, Jerzy

2007-07-01

The photoelectron spectra of the hydrogen-bonded amino acid side-chain-guanine complexes has been studied at the partial third order (P3) self-energy approximation of the electron propagator theory. The correlation between the vertical electron detachment energy and the charge distributions on the guanine moiety reveals that the vertical electron detachment energy (VDE) increases as the positive charge distribution on the guanine increases. The low VDE values determined for the negatively charged complexes of the guanine-side-chain-group of Asp/Glu suggest that the influence of the H-bonded anionic groups on the VDE of guanine could be more important than that of the anionic backbone structure. The even lower vertical electron detachment energy for guanine is thus can be expected in the H-bonded protein-DNA systems.

Transparency views by media

International Nuclear Information System (INIS)

Ikawa, Y.

2007-01-01

In this presentation, various problems surrounding the issues of transparency, such as 'What exactly should be transparent?' 'Is all that we want amounting only to transparency?' 'Is it possible to thoroughly implement transparency', etc., are discussed with due consideration for the viewpoints of the wide range of parties concerned involving areas of politics, administration, enterprises, media, individuals, and so on. First of all, the explanation is focused on how the transparency is recognised, as well as how it is regarded as important, for the public at large and the media. Then, based on the concept that transparency is required for what cannot be justified to be secret, we will contemplate what should be transparent in the areas of politics, administration and enterprises, using the case of nuclear issues as example. Next, the discussion will proceed to the point whether the achievement of transparency itself should be the ultimate goal, in the light of taking into consideration the standpoints of individuals and the receivers of the information, in addition to that of the administration, politics, and enterprises. In closing, we will discuss what the necessary measures will be to materialize the complete transparency on the basis of the discussions made thus far. (author)

Transparent lithium-ion batteries

KAUST Repository

Yang, Y.; Jeong, S.; Hu, L.; Wu, H.; Lee, S. W.; Cui, Y.

2011-01-01

Transparent devices have recently attracted substantial attention. Various applications have been demonstrated, including displays, touch screens, and solar cells; however, transparent batteries, a key component in fully integrated transparent

Free convection performance of circular cavities having two active curved vertical sides and two inactive curved horizontal sides

International Nuclear Information System (INIS)

Ridouane, El Hassan; Campo, Antonio

2006-01-01

A detailed review of the archival reveals that the heat transfer and fluid flow characteristics of circular cavities have not been investigated so far and of course their physical features are not understood. A prominent application of these cavities arises in the miniaturized packaging of electronic components that are subject to strict constraints. This paper addresses primarily steady-state laminar natural convection of air in a circular cavity of diameter H inscribed in a square cavity of side H where the corresponding sides are in contact at four points. A third cavity, an arc-square cavity whose shape lies between the square and circular cavity shapes is included in the analysis. The finite volume method is used to perform the numerical simulations. The methodology takes into account the second-order-accurate QUICK scheme for the discretization of the convective term, whereas the pressure-velocity coupling is handled with the SIMPLE scheme. Since the air is not assumed a Boussinesq gas, it was decided to take all thermophysical properties as temperature-dependent. In the end, it has been demonstrated that the circular cavity possesses a superior balance between heat transfer enhancement and size in cross-section area in comparison with the standard square cavity. The side of the square cavity is similar to the diameter of the circular cavity

Vertical distribution of the particle phase in tropical deep convective clouds as derived from cloud-side reflected solar radiation measurements

Directory of Open Access Journals (Sweden)

E. Jäkel

2017-07-01

Full Text Available Vertical profiles of cloud particle phase in tropical deep convective clouds (DCCs were investigated using airborne solar spectral radiation data collected by the German High Altitude and Long Range Research Aircraft (HALO during the ACRIDICON-CHUVA campaign, which was conducted over the Brazilian rainforest in September 2014. A phase discrimination retrieval based on imaging spectroradiometer measurements of DCC side spectral reflectivity was applied to clouds formed in different aerosol conditions. From the retrieval results the height of the mixed-phase layer of the DCCs was determined. The retrieved profiles were compared with in situ measurements and satellite observations. It was found that the depth and vertical position of the mixed-phase layer can vary up to 900 m for one single cloud scene. This variability is attributed to the different stages of cloud development in a scene. Clouds of mature or decaying stage are affected by falling ice particles resulting in lower levels of fully glaciated cloud layers compared to growing clouds. Comparing polluted and moderate aerosol conditions revealed a shift of the lower boundary of the mixed-phase layer from 5.6 ± 0.2 km (269 K; moderate to 6.2 ± 0.3 km (267 K; polluted, and of the upper boundary from 6.8 ± 0.2 km (263 K; moderate to 7.4 ± 0.4 km (259 K; polluted, as would be expected from theory.

Cryogenic system for the Energy Recovery Linac and vertical test facility at BNL

International Nuclear Information System (INIS)

Than, R.; Soria, V.; Lederle, D.; Orfin, P.; Porqueddu, R.; Talty, P.; Zhang, Y.; Tallerico, T.; Masi, L.

2011-01-01

A small cryogenic system and warm helium vacuum pumping system provides cooling to either the Energy Recovery Linac's (ERL) cryomodules that consist of a 5-cell cavity and an SRF gun or a large Vertical Test Dewar (VTD) at any given time. The cryogenic system consists of a model 1660S PSI piston plant, a 3800 liter storage dewar, subcooler, a wet expander, a 50 g/s main helium compressor, and a 170 m 3 storage tank. A system description and operating plan of the cryogenic plant and cryomodules is given. The cryogenic system for ERL and the Vertical Test Dewar has a plant that can produce the equivalent of 300W at 4.5K with the addition of a wet expander 350 W at 4.5K. Along with this system, a sub-atmospheric, warm compression system provides pumping to produce 2K at the ERL cryomodules or the Vertical Test Dewar. The cryogenic system for ERL and the Vertical Test Dewar makes use of existing equipment for putting a system together. It can supply either the ERL side or the Vertical Test Dewar side, but not both at the same time. Double valve isolation on the liquid helium supply line allows one side to be warmed to room temperature and worked on while the other side is being held at operating temperature. The cryogenic system maintain the end loads from 4.4K to 2K or colder depending on capacity. Liquid helium storage dewar capacity allows ERL or the VTD to operate above the plant's capacity when required and ERL cryomodules ballast reservoirs and VTD reservoir allows the end loads to operate on full vacuum pump capacity when required.

The Causes of Fiscal Transparency

DEFF Research Database (Denmark)

Alt, James E.; Lassen, David Dreyer; Rose, Shanna

We use unique panel data on the evolution of transparent budget procedures in the American states over the past three decades to explore the political and economic determinants of fiscal transparency. Our case studies and quantitative analysis suggest that both politics and fiscal policy outcomes...... influence the level of transparency. More equal political competition and power sharing are associated with both greater levels of fiscal transparency and increases in fiscal transparency during the sample period. Political polarization and past fiscal conditions, in particular state government debt...... and budget imbalance, also appear to affect the level of transparency...

Voluntarism and transparent deliberation

DEFF Research Database (Denmark)

Steglich-Petersen, Asbjørn

2006-01-01

voluntarism. I argue that transparency to factual questions occurs in practical deliberation in ways parallel to transparency in doxastic deliberation. I argue that this should make us reconsider the appeal to transparency in arguments against doxastic voluntarism, and the wider issue of distinguishing...... theoretical from practical rationality....

Optimal Central Bank Transparency

NARCIS (Netherlands)

van der Cruijsen, C.A.B.; Eijffinger, S.C.W.; Hoogduin, L.H.

2008-01-01

Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the

Optimal central bank transparency

NARCIS (Netherlands)

van der Cruijsen, C.A.B.; Eijffinger, S.C.W.; Hoogduin, L.

2008-01-01

Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the

Optimal central bank transparency

NARCIS (Netherlands)

van der Cruijsen, C.A.B.; Eijffinger, S.C.W.; Hoogduin, L.H.

2010-01-01

Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the

Rapid, high‐fluence multi‐pass q‐switched laser treatment of tattoos with a transparent perfluorodecalin‐infused patch: A pilot study

Science.gov (United States)

O'Neil, Michael P.; Costner, Cara

2015-01-01

Background and Objectives Perfluorodecalin (PFD) has previously been shown to rapidly dissipate the opaque, white micro‐bubble layer formed after exposure of tattoos to Q‐switched lasers [1]. The current pilot study was conducted to qualitatively determine if the use of a transparent PFD‐infused silicone patch would result in more rapid clearance of tattoos than conventional through‐air techniques. Materials and Methods Black or dark blue tattoos were divided into two halves in a single‐site IRB‐approved study with 17 subjects with Fitzpatrick skin types I–III. One half of each tattoo served as its own control and was treated with one pass of a standard Q‐switched Alexandrite laser (755 nm). The other half of the tattoo was treated directly through a transparent perfluorodecalin (PFD) infused patch (ON Light Sciences, Dublin, CA). The rapid whitening reduction effect of the Patch routinely allowed three to four laser passes in a total of approximately 5 minutes. Both sides were treated at highest tolerated fluence, but the optical clearing, index‐matching, and epidermal protection properties of the PFD Patch allowed significantly higher fluence compared to the control side. Standard photographs were taken at baseline, immediately prior to treatment with the PFD Patch in place, and finally before and after each treatment session. Treatments were administered at 4‐ to 6‐week intervals. Results In a majority of subjects (11 of 17), tattoos treated through a transparent PFD‐infused patch showed more rapid tattoo clearance with higher patient and clinician satisfaction than conventional treatment. In no case did the control side fade faster than the PFD Patch side. No unanticipated adverse events were observed. Conclusions Rapid multi‐pass treatment of tattoos with highest tolerated fluence facilitated by a transparent PFD‐infused patch clears tattoos more rapidly than conventional methods. Lasers Surg. Med. 47:613–618, 2015. © 2015 The

Innovative transparent armour concepts

NARCIS (Netherlands)

Carton, E.P.; Broos, J.P.F.

2011-01-01

Ever since WWII transparent armour consists of a multi-layer of glass panels bonded by thin polymer bond-films using an autoclave process. TNO has worked on the development of innovative transparent armour concepts that are lighter and a have better multi-hit capacity. Two new transparent armour

Transparent ‘solution’ of ultrathin magnesium hydroxide nanocrystals for flexible and transparent nanocomposite films

International Nuclear Information System (INIS)

Wang, Jie-Xin; Sun, Qian; Chen, Bo; Zeng, Xiao-Fei; Zhang, Cong; Chen, Jian-Feng; Wu, Xi; Zou, Hai-Kui

2015-01-01

Transparent solutions of nanocrystals exhibit many unique properties, and are thus attractive materials for numerous applications. However, the synthesis of transparent nanocrystal solutions of magnesium hydroxide (MH) with wide applications is yet to be realized. Here, we report a facile two-step process, which includes a direct reactive precipitation in alcohol phase instead of aqueous phase combined with a successive surface modification, to prepare transparent alcohol solutions containing lamellar MH nanocrystals with an average size of 52 nm and an ultrathin thickness of 1–2 nm, which is the thinnest MH nanoplatelet reported in the literatures. Further, highly flexible and transparent nanocomposite films are fabricated with a solution mixing method by adding the transparent MH nanocrystal solutions into PVB solution. Considering the simplicity of the fabrication process, high transparency and good flexibility, this MH/polymer nanocomposite film is promising for flame-resistant applications in plastic electronics and optical devices with high transparency, such as flexible displays, optical filters, and flexible solar cells. (paper)

Subscribing to Transparency

DEFF Research Database (Denmark)

He, Yinghua; Nielsson, Ulf; Guo, Hong

2014-01-01

The paper empirically explores how more trade transparency affects market liquidity. The analysis takes advantage of a unique setting in which the Shanghai Stock Exchange offered more trade transparency to market participants subscribing to a new software package. First, the results show...... that the additional data disclosure increased trading activity, but also increased transactions costs through wider bid-ask spreads. Thus, in contrast to popular policy belief, the paper finds that more transparency need not improve market liquidity. Second, the paper finds a particularly strong immediate liquidity...... impact accompanied by altered trading behavior, which suggests a significant impact on institutional traders subscribing relatively early. Lastly, since the effective level of market transparency is bound to depend on how many traders are subscribing to the data, the study can empirically establish...

Subscribing to Transparency

DEFF Research Database (Denmark)

He, Yinghua; Nielsson, Ulf; Guo, Hong

The paper empirically explores how more trade transparency affects market liquidity. The analysis takes advantage of a unique setting in which the Shanghai Stock Exchange offered more trade transparency to market participants subscribing to a new software package. First, the results show...... that the additional data disclosure increased trading activity, but also increased transactions costs through wider bid-ask spreads. Thus, in contrast to popular policy belief, the paper finds that more transparency need not improve market liquidity. Second, the paper finds a particularly strong immediate liquidity...... impact accompanied by altered trading behavior, which suggests a significant impact on institutional traders subscribing relatively early. Lastly, since the effective level of market transparency is bound to depend on how many traders are subscribing to the data, the study can empirically establish...

Color transparency

International Nuclear Information System (INIS)

Pire, B.; Ralston, J.P.

1991-01-01

This paper reviews the physics of color transparency and the unexpected energy dependence of recent measurements of high-energy fixed-angle elastic scattering in nuclear targets. The authors point out advantages of using transparency as a tool, introducing two concepts - spin and flavor flow filtering - that may be studied with nuclear targets. The special case of electroproduction is also considered

Factors effecting paint performance on wood siding

Science.gov (United States)

Christopher G. Hunt; R. Sam Williams; Mark Knaebe; Peter Sotos; Steven Lacher

2009-01-01

Several different studies are compared to assess the effectiveness of commercial water repellent preservatives (WRP’s) in the late 1990’s on vertical and horizontal siding. Besides WRP, variables included wood species, exposure location (Wisconsin or Mississippi), and solid color stain vs. primer + paint. Data on substrate checking and paint flaking are presented....

Flame-retardant polyvinyl alcohol membrane with high transparency based on a reactive phosphorus-containing compound

Science.gov (United States)

Peng, Sha; Zhou, Ming; Liu, Feiyan; Zhang, Chang; Liu, Xueqing; Liu, Jiyan; Zou, Liyong; Chen, Jia

2017-08-01

Flame-retardant polyvinyl alcohol (PVA) membranes with high transparency and flexibility were prepared by mixing an aqueous solution of a phosphorus-containing acrylic acid (AOPA) with PVA. The reaction between AOPA and PVA, the transparency, the crystallinity and the flexibility of the membrane were investigated with Fourier transform infrared spectrometry (FTIR), UV-vis light transmittance, X-ray diffraction and tensile tests, respectively. The limited oxygen index (LOI) and vertical flame (UL 94 VTM), microscale combustion calorimetry, thermogravimetric analysis (TGA) and TGA-FTIR were employed to evaluate the flame retardancy as well as to reveal the corresponding mechanisms. Results showed that PVA containing 30 wt% of AOPA can reach the UL 94 VTM V0 rating with an LOI of 27.3% and retain 95% of the original transparency of pure PVA. Adding AOPA reduces crystallinity of PVA, while the flexibility is increased. AOPA depresses the thermal degradation of PVA and promotes char formation during combustion. The proposed decomposition mechanism indicates that AOPA acts mainly in the condensed phase.

Seasonal shading of walls with transparent thermal insulation by means of prismatic panes; Saisonale Abschattung von transparent gedaemmten Waenden mit Hilfe von Prismenscheiben

Energy Technology Data Exchange (ETDEWEB)

Christoffers, D.; Kneser, P.; Schramm, U. [Institut fuer Solarenergieforschung GmbH Hameln/Emmerthal (ISFH), Emmerthal (Germany). Abt. Systemtechnik von Solaranlagen

1998-02-01

Using prismatic panes, a seasonal shading responsive to the sun`s position can be realized. Thus the solar gains from direct radiation can be closely matched to the annual pattern of the heating requirements of buildings. The panes are suitable for window or facade elements in applications which do not need transparency insulated walls. The direct radiation received on a vertical south-oriented facade is reduced to 10% on clear summer days, while 90% is transmitted on clear winter days. The paper reports on results from computer simulations and experiences from a one year field test. (orig.) [Deutsch] Mit Hilfe von Prismenscheiben kann eine sonnenstandsabhaengige, saisonale Verschattung realisiert werden. Damit lassen sich solare Gewinne aus direkter Einstrahlung sehr gut an den jaehrlichen Verlauf des Heizenergiebedarfs von Gebaeuden anpassen. Sie eignen sich als nach Sueden weisende Fenster- und Fassadenelemente vorzugsweise in Bereichen, die keinen freien Durchblick benoetigen, insbesondere auch fuer transparent gedaemmte Solarwaende. Die auf die Suedfassade treffende Direktstrahlung wird durch die Prismenscheibe an klaren Wintertagen auf etwa 90%, an klaren Sommertagen auf 10% reduziert. Der Beitrag beschreibt die Ergebnisse von Simulationsrechnungen und die Erfahrungen aus einem einjaehrigen Praxistest. (orig.)

Unidirectional plasmonically induced transparency behavior in a compact graphene-based waveguide

International Nuclear Information System (INIS)

Zhang, Zhengren; Long, Yang; Zang, Xiaofei

2017-01-01

A graphene-based waveguide structure is proposed to achieve a unidirectional plasmonically induced transparency (PIT) behavior. In this structure, a standing-wave cavity can be formed in the graphene waveguide by controlling the Fermi energy at a different part of the graphene. Two resonant graphene ribbons are placed at the node and antinode of the standing-wave cavity field, respectively. Its corresponding optical response coming from different incident sides show a unidirectional PIT behavior. This is because the excited bright resonant graphene ribbon located at antinode inhibits the field strength on its downstream side and causes the field redistribution on its upstream side. When the wave propagates along the sequence node-antinode, the redistribution field will excite the dark resonant graphene ribbon, such that both ribbons couple coherently and the PIT behavior appears. In contrast, when the wave propagates along the sequence antinode-node, the dark resonant graphene ribbon remains dark, and no PIT appears. Our results may benefit novel nonreciprocal devices in the future. (paper)

Strong contributions from vertical triads to helix-partner preferences in parallel coiled coils.

Science.gov (United States)

Steinkruger, Jay D; Bartlett, Gail J; Woolfson, Derek N; Gellman, Samuel H

2012-09-26

Pairing preferences in heterodimeric coiled coils are determined by complementarities among side chains that pack against one another at the helix-helix interface. However, relationships between dimer stability and interfacial residue identity are not fully understood. In the context of the "knobs-into-holes" (KIH) packing pattern, one can identify two classes of interactions between side chains from different helices: "lateral", in which a line connecting the adjacent side chains is perpendicular to the helix axes, and "vertical", in which the connecting line is parallel to the helix axes. We have previously analyzed vertical interactions in antiparallel coiled coils and found that one type of triad constellation (a'-a-a') exerts a strong effect on pairing preferences, while the other type of triad (d'-d-d') has relatively little impact on pairing tendencies. Here, we ask whether vertical interactions (d'-a-d') influence pairing in parallel coiled-coil dimers. Our results indicate that vertical interactions can exert a substantial impact on pairing specificity, and that the influence of the d'-a-d' triad depends on the lateral a' contact within the local KIH motif. Structure-informed bioinformatic analyses of protein sequences reveal trends consistent with the thermodynamic data derived from our experimental model system in suggesting that heterotriads involving Leu and Ile are preferred over homotriads involving Leu and Ile.

Transparency in Health Programmes

OpenAIRE

Vian, Taryn

2008-01-01

Transparency is an important tool for good governance, helping to expose abusive practices including fraud, patronage, corruption, and other abuses of power. Increasing transparency can also enhance accountability by providing performance management information and exposing policies and procedures to oversight. This U4 Brief discusses the role of transparency in preventing corruption in the health sector.

The impact of records management system in transparency of public administrations: Transparency by design

Directory of Open Access Journals (Sweden)

Agustí Cerrillo Martínez

2018-05-01

Full Text Available Records management system has a great impact in the improvement of transparency in public administration. Transparency by design refers to the inclusion of transparency duties stated by legislation in force in the records’ life cycle in a way that it guarantees citizens effective access to public information. In this paper, the changes that public administrations have to propel in their records management systems to improve public transparency and to make easy access to information are analysed. In particular, as a case study, provisions made by Law 19/2014, of December 29, on Transparency, Access to Public Information and Good Governance of Catalonia are explored.

Graphene-Au nanoparticle based vertical heterostructures: a novel route towards high- ZT Thermoelectric devices

KAUST Repository

Juang, Zhen-Yu; Tseng, Chien-Chih; Shi, Yumeng; Hsieh, Wen-Pin; Ryuzaki, Sou; Saito, Noboru; Hsiung, Chia-En; Chang, Wen-Hao; Hernandez, Yenny; Han, Yu; Tamada, Kaoru; Li, Lain-Jong

2017-01-01

Monolayer graphene exhibits impressive in-plane thermal conductivity (>1000Wm–1 K–1). However, the out-of-plane thermal transport is limited due to the weak van der Waals interaction, indicating the possibility of constructing a vertical thermoelectric (TE) device. Here, we propose a cross-plane TE device based on the vertical heterostructures of few-layer graphene and gold nanoparticles (AuNPs) on Si substrates, where the incorporation of AuNPs further inhibits the phonon transport and enhances the electrical conductivity along vertical direction. A measurable Seebeck voltage is produced vertically between top graphene and bottom Si when the device is put on a hot surface and the figure of merit ZT is estimated as 1 at room temperature from the transient Harman method. The polarity of the output voltage is determined by the carrier polarity of the substrate. The device concept is also applicable to a flexible and transparent substrate as demonstrated.

Graphene-Au nanoparticle based vertical heterostructures: a novel route towards high- ZT Thermoelectric devices

KAUST Repository

Juang, Zhen-Yu

2017-06-03

Monolayer graphene exhibits impressive in-plane thermal conductivity (>1000Wm–1 K–1). However, the out-of-plane thermal transport is limited due to the weak van der Waals interaction, indicating the possibility of constructing a vertical thermoelectric (TE) device. Here, we propose a cross-plane TE device based on the vertical heterostructures of few-layer graphene and gold nanoparticles (AuNPs) on Si substrates, where the incorporation of AuNPs further inhibits the phonon transport and enhances the electrical conductivity along vertical direction. A measurable Seebeck voltage is produced vertically between top graphene and bottom Si when the device is put on a hot surface and the figure of merit ZT is estimated as 1 at room temperature from the transient Harman method. The polarity of the output voltage is determined by the carrier polarity of the substrate. The device concept is also applicable to a flexible and transparent substrate as demonstrated.

Passive Collecting of Solar Radiation Energy using Transparent Thermal Insulators, Energetic Efficiency of Transparent Thermal Insulators

Directory of Open Access Journals (Sweden)

Smajo Sulejmanovic

2014-11-01

Full Text Available This paper explains passive collection of solar radiation energy using transparent thermal insulators. Transparent thermal insulators are transparent for sunlight, at the same time those are very good thermal insulators. Transparent thermal insulators can be placed instead of standard conventional thermal insulators and additionally transparent insulators can capture solar radiation, transform it into heat and save heat just as standard insulators. Using transparent insulators would lead to reduce in usage of fossil fuels and would help protection of an environment and reduce effects of global warming, etc.

Understanding modern transparency

NARCIS (Netherlands)

Meijer, A.J.|info:eu-repo/dai/nl/172436729

2009-01-01

Proponents and opponents fiercely debate whether computer-mediated transparency has a positive effect on trust in the public sector. This article enhances our understanding of transparency by presenting three perspectives: a premodern, modern and post-modern perspective, and analyzing the basic

Competition for transparency as a carrier of competition. Transparency needs in the European wholesale electricity markets

International Nuclear Information System (INIS)

Jong, Hanneke de; Hakvoort, Rudi

2005-01-01

This paper analyses different transparency aspects regarding European wholesale electricity markets and discusses transparency issues to be solved. In Europe, currently some progress has been made with respect to market transparency but transparency issues related to transmission, system operation and regulation have received little attention so far. Transmission system operators (TSOs) and regulatory authorities need certain market information in order to secure efficient competition. However, TSOs and regulatory authorities need to communicate themselves in order to facilitate competition and decrease uncertainty among market participants. Furthermore, considering ongoing market integration both TSOs and regulatory authorities must exchange information amongst themselves in order to facilitate coordination and monitoring activities. The effect of a higher level of transparency on effective competition is depended on two categories of transparency aspects: aspects that are related to transparency in the sense of open and adequate communication (perspicuity) and aspects that are related to the easiness to understand (clarity). Transparency includes both aspects. Pursuing overall harmonization of the European transparency level is important to fully profit from a higher level of (international) harmonization. Effective harmonization requires harmonization on all communication aspects. For Europe, with its many immature markets, the dilemma remains whether it is preferable to have less transparency with a high level of harmonization or to have a higher level of transparency but a lower level of harmonization. (Author)

Categories and Dimensions of Organizational Transparency

DEFF Research Database (Denmark)

Albu, Oana Brindusa; Flyverbom, Mikkel

Transparency is a distinctive area of research across disciplines and presents significant importance for organization studies. However, transparency is rarely subject to structured and critical scrutiny and as a result its relevance for organizational analysis is underestimated. In an attempt...... to foreground the value of transparency studies, we offer an overview of the existing research and indicate two paradigmatic positions underpinning the transparency literature, namely what we term non-performative and performative approaches. The main contribution of the paper lies in this ground......, an approach which remains underexplored. Finally, we discuss some avenues for future studies of the organizing properties of transparency: the secrecy-transparency interplay, the power-transparency nexus and the transparency ‘family tree’ (i.e., intersections between multiple forms of disclosure)....

On color transparency

International Nuclear Information System (INIS)

Jennings, B.K.; Miller, G.A.

1989-10-01

A quantum mechanical treatment of high momentum transfer nuclear processes is presented. Color transparency, the suppression of initial and final state interaction effects, is shown to arise from using the closure approximation. New conditions for the appearance of color transparency are derived

High Temperature Transparent Furnace Development

Science.gov (United States)

Bates, Stephen C.

1997-01-01

This report describes the use of novel techniques for heat containment that could be used to build a high temperature transparent furnace. The primary objective of the work was to experimentally demonstrate transparent furnace operation at 1200 C. Secondary objectives were to understand furnace operation and furnace component specification to enable the design and construction of a low power prototype furnace for delivery to NASA in a follow-up project. The basic approach of the research was to couple high temperature component design with simple concept demonstration experiments that modify a commercially available transparent furnace rated at lower temperature. A detailed energy balance of the operating transparent furnace was performed, calculating heat losses through the furnace components as a result of conduction, radiation, and convection. The transparent furnace shells and furnace components were redesigned to permit furnace operation at at least 1200 C. Techniques were developed that are expected to lead to significantly improved heat containment compared with current transparent furnaces. The design of a thermal profile in a multizone high temperature transparent furnace design was also addressed. Experiments were performed to verify the energy balance analysis, to demonstrate some of the major furnace improvement techniques developed, and to demonstrate the overall feasibility of a high temperature transparent furnace. The important objective of the research was achieved: to demonstrate the feasibility of operating a transparent furnace at 1200 C.

Perceptual transparency from image deformation.

Science.gov (United States)

Kawabe, Takahiro; Maruya, Kazushi; Nishida, Shin'ya

2015-08-18

Human vision has a remarkable ability to perceive two layers at the same retinal locations, a transparent layer in front of a background surface. Critical image cues to perceptual transparency, studied extensively in the past, are changes in luminance or color that could be caused by light absorptions and reflections by the front layer, but such image changes may not be clearly visible when the front layer consists of a pure transparent material such as water. Our daily experiences with transparent materials of this kind suggest that an alternative potential cue of visual transparency is image deformations of a background pattern caused by light refraction. Although previous studies have indicated that these image deformations, at least static ones, play little role in perceptual transparency, here we show that dynamic image deformations of the background pattern, which could be produced by light refraction on a moving liquid's surface, can produce a vivid impression of a transparent liquid layer without the aid of any other visual cues as to the presence of a transparent layer. Furthermore, a transparent liquid layer perceptually emerges even from a randomly generated dynamic image deformation as long as it is similar to real liquid deformations in its spatiotemporal frequency profile. Our findings indicate that the brain can perceptually infer the presence of "invisible" transparent liquids by analyzing the spatiotemporal structure of dynamic image deformation, for which it uses a relatively simple computation that does not require high-level knowledge about the detailed physics of liquid deformation.

PDMS-based triboelectric and transparent nanogenerators with ZnO nanorod arrays.

Science.gov (United States)

Ko, Yeong Hwan; Nagaraju, Goli; Lee, Soo Hyun; Yu, Jae Su

2014-05-14

Vertically-grown ZnO nanorod arrays (NRAs) on indium tin oxide (ITO)-coated polyethylene terephthalate (PET), as a top electrode of nanogenerators, were investigated for the antireflective property as well as an efficient contact surface in bare polydimethysiloxane (PDMS)-based triboelectric nanogenerators. Compared to conventional ITO-coated PET (i.e., ITO/PET), the ZnO NRAs considerably suppressed the reflectance from 20 to 9.7% at wavelengths of 300-1100 nm, creating a highly transparent top electrode, as demonstrated by theoretical analysis. Also, the interval time between the peaks of generated output voltage under external pushing forces was significantly decreased from 1.84 to 0.19 s because the reduced contact area of the PDMS by discrete surfaces of the ZnO NRAs on ITO/PET causes a rapid sequence for triboelectric charge generation process including rubbing and separating. Therefore, the use of this top electrode enabled to operate the transparent PDMS-based triboelectric nanogenerator at high frequency of external pushing force. Under different external forces of 0.3-10 kgf, the output voltage and current were also characterized.

Transparency and public value : Analyzing the transparency practices and value creation of public utilities

NARCIS (Netherlands)

Douglas, S.C.; Meijer, A.J.

2016-01-01

This article examines to what extent transparency is a condition for the creation of public value. Transparency is usually narrowly defined as a tool for external stakeholders to monitor the internal workings of an organization, but public value management positions transparency as a broader

What color transparency measures

International Nuclear Information System (INIS)

Jain, P.; Ralston, J.P.

1992-01-01

Color transparency is commonly accepted to be a prediction of perturbative QCD. However it is more a phenomenon probing the interface between the perturbative and nonperturbative regimes, leading to some intricacy in its theoretical description. In this paper we study the consequences of the impulse approximation to the theory in various quantum mechanical bases. We show that the fully interacting hadronic basis, which consists of eigenstates of the exact Hamiltonian in the presence of the nucleus, provides a natural basis to study color transparency. In this basis we can relate the quark wave function at a small transverse separation distance b 2 2 directly to transparency ratios measured in experiment. With the formalism, experiment can be used to map out the quark wave function in this region. We exhibit several loopholes in existing arguments predicting a rise in transparency ratios with energy, and suggest alternatives. Among the results, we argue that the theoretical prediction of a rising transparency ratio with energy may be on better footing for heavy-quark bound states than for relativistic light-quark systems. We also point out that transparency ratios can be constant with energy and not at variance with perturbative QCD

Semi-transparent solar cells

International Nuclear Information System (INIS)

Sun, J; Jasieniak, J J

2017-01-01

Semi-transparent solar cells are a type of technology that combines the benefits of visible light transparency and light-to-electricity conversion. One of the biggest opportunities for such technologies is in their integration as windows and skylights within energy-sustainable buildings. Currently, such building integrated photovoltaics (BIPV) are dominated by crystalline silicon based modules; however, the opaque nature of silicon creates a unique opportunity for the adoption of emerging photovoltaic candidates that can be made truly semi-transparent. These include: amorphous silicon-, kesterite-, chalcopyrite-, CdTe-, dye-sensitized-, organic- and perovskite- based systems. For the most part, amorphous silicon has been the workhorse in the semi-transparent solar cell field owing to its established, low-temperature fabrication processes. Excitement around alternative classes, particularly perovskites and the inorganic candidates, has recently arisen because of the major efficiency gains exhibited by these technologies. Importantly, each of these presents unique opportunities and challenges within the context of BIPV. This topic review provides an overview into the broader benefits of semi-transparent solar cells as building-integrated features, as well as providing the current development status into all of the major types of semi-transparent solar cells technologies. (topical review)

Lignin-Retaining Transparent Wood.

Science.gov (United States)

Li, Yuanyuan; Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin; Berglund, Lars

2017-09-11

Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light-transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high-lignin-content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK -1 , and work-tofracture of 1.2 MJ m -3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy-saving buildings. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Semi-transparent solar cells

Science.gov (United States)

Sun, J.; Jasieniak, J. J.

2017-03-01

Semi-transparent solar cells are a type of technology that combines the benefits of visible light transparency and light-to-electricity conversion. One of the biggest opportunities for such technologies is in their integration as windows and skylights within energy-sustainable buildings. Currently, such building integrated photovoltaics (BIPV) are dominated by crystalline silicon based modules; however, the opaque nature of silicon creates a unique opportunity for the adoption of emerging photovoltaic candidates that can be made truly semi-transparent. These include: amorphous silicon-, kesterite-, chalcopyrite-, CdTe-, dye-sensitized-, organic- and perovskite- based systems. For the most part, amorphous silicon has been the workhorse in the semi-transparent solar cell field owing to its established, low-temperature fabrication processes. Excitement around alternative classes, particularly perovskites and the inorganic candidates, has recently arisen because of the major efficiency gains exhibited by these technologies. Importantly, each of these presents unique opportunities and challenges within the context of BIPV. This topic review provides an overview into the broader benefits of semi-transparent solar cells as building-integrated features, as well as providing the current development status into all of the major types of semi-transparent solar cells technologies.

EU Transparency Register

NARCIS (Netherlands)

Mańko, R.; Thiel, M.; Bauer, E.

2014-01-01

Widespread lobbying in the EU institutions has led to criticism regarding the transparency and accountability of the EU's decision-making process. In response to these concerns, the Parliament set up its transparency register in 1995, followed by the Commission in 2008. The two institutions merged

Color transparency

International Nuclear Information System (INIS)

Miller, G.A.

1993-01-01

Imagine shooting a beam of protons of high momentum P through an atomic nucleus. Usually the nuclear interactions prevent the particles from emerging with momentum ∼P. Further, the angular distribution of elastically scattered protons is close to the optical diffraction pattern produced by a black disk. Thus the nucleus acts as a black disk and is not transparent. However, certain high momentum transfer reactions in which a proton is knocked out of the nucleus may be completely different. Suppose that the high momentum transfer process leads to the formation of a small-size color singlet wavepacket that is ejected from the nucleus. The effects of gluons emitted by color singlet systems of closely separated quarks and gluons tend to cancel. Thus the wavepacket-nuclear interactions are suppressed, the nucleus becomes transparant and one says that color transparency CT occurs. The observation of CT also requires that the wavepacket not expand very much while it moves through the nucleus. Simple quantum mechanical formulations can assess this expansion. The creation of a small-sized wavepacket is expected in asymptotic perturbative effects. The author reviews the few experimental attempts to observe color transparency in nuclear (e,e'p) and (p,pp) reactions and interpret the data and their implications

Full-scale fire experiments on vertical horizontal cable trays

International Nuclear Information System (INIS)

Mangs, J.; Keski-Rahkonen, O.

1997-10-01

Two full-scale fire experiments on PVC cables used in nuclear power plants were carried out, one with cables in vertical position and one with cables in horizontal position. The vertical cable bundle, 3 m high, 300 mm wide and 30 mm thick, was attached to a steel cable ladder. The vertical bundle experiment was carried out in nearly free space with three walls near the cable ladder guiding air flow in order to stabilise flames. The horizontal cable experiment was carried out in a small room with five cable bundles attached to steel cable ladders. Three of the 2 m long cable bundles were located in an array, equally spaced above each other near one long side of the room and two correspondingly near the opposite long side. The vertical cable bundle was ignited with a small propane gas burner beneath the lower edge of the bundle. The horizontal cable bundles were ignited with a small propane burner beneath the lowest bundle in an array of three bundles. Rate of heat release by means of oxygen consumption calorimetry, mass change, CO 2 , CO and smoke production rate and gas, wall and cable surface temperatures were measured as a function of time, as well as time to sprinkler operation and failure of test voltage in cables. Additionally, the minimum rate of heat release needed to ignite the bundle was determined. This paper concentrates on describing and recording the experimental set-up and the data obtained. (orig.)

Second-order nonlinearity induced transparency.

Science.gov (United States)

Zhou, Y H; Zhang, S S; Shen, H Z; Yi, X X

2017-04-01

In analogy to electromagnetically induced transparency, optomechanically induced transparency was proposed recently in [Science330, 1520 (2010)SCIEAS0036-807510.1126/science.1195596]. In this Letter, we demonstrate another form of induced transparency enabled by second-order nonlinearity. A practical application of the second-order nonlinearity induced transparency is to measure the second-order nonlinear coefficient. Our scheme might find applications in quantum optics and quantum information processing.

Flame-retardant polyvinyl alcohol membrane with high transparency based on a reactive phosphorus-containing compound.

Science.gov (United States)

Peng, Sha; Zhou, Ming; Liu, Feiyan; Zhang, Chang; Liu, Xueqing; Liu, Jiyan; Zou, Liyong; Chen, Jia

2017-08-01

Flame-retardant polyvinyl alcohol (PVA) membranes with high transparency and flexibility were prepared by mixing an aqueous solution of a phosphorus-containing acrylic acid (AOPA) with PVA. The reaction between AOPA and PVA, the transparency, the crystallinity and the flexibility of the membrane were investigated with Fourier transform infrared spectrometry (FTIR), UV-vis light transmittance, X-ray diffraction and tensile tests, respectively. The limited oxygen index (LOI) and vertical flame (UL 94 VTM), microscale combustion calorimetry, thermogravimetric analysis (TGA) and TGA-FTIR were employed to evaluate the flame retardancy as well as to reveal the corresponding mechanisms. Results showed that PVA containing 30 wt% of AOPA can reach the UL 94 VTM V0 rating with an LOI of 27.3% and retain 95% of the original transparency of pure PVA. Adding AOPA reduces crystallinity of PVA, while the flexibility is increased. AOPA depresses the thermal degradation of PVA and promotes char formation during combustion. The proposed decomposition mechanism indicates that AOPA acts mainly in the condensed phase.

Ultra-high mobility transparent organic thin film transistors grown by an off-centre spin-coating method.

Science.gov (United States)

Yuan, Yongbo; Giri, Gaurav; Ayzner, Alexander L; Zoombelt, Arjan P; Mannsfeld, Stefan C B; Chen, Jihua; Nordlund, Dennis; Toney, Michael F; Huang, Jinsong; Bao, Zhenan

2014-01-01

Organic semiconductors with higher carrier mobility and better transparency have been actively pursued for numerous applications, such as flat-panel display backplane and sensor arrays. The carrier mobility is an important figure of merit and is sensitively influenced by the crystallinity and the molecular arrangement in a crystal lattice. Here we describe the growth of a highly aligned meta-stable structure of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) from a blended solution of C8-BTBT and polystyrene by using a novel off-centre spin-coating method. Combined with a vertical phase separation of the blend, the highly aligned, meta-stable C8-BTBT films provide a significantly increased thin film transistor hole mobility up to 43 cm(2) Vs(-1) (25 cm(2) Vs(-1) on average), which is the highest value reported to date for all organic molecules. The resulting transistors show high transparency of >90% over the visible spectrum, indicating their potential for transparent, high-performance organic electronics.

DNB heat flux on inner side of a vertical pipe in forced flow of liquid hydrogen and liquid nitrogen

Science.gov (United States)

Shirai, Yasuyuki; Tatsumoto, Hideki; Shiotsu, Masahiro; Hata, Koichi; Kobayashi, Hiroaki; Naruo, Yoshihiro; Inatani, Yoshifumi

2018-06-01

Heat transfer from inner side of a heated vertical pipe to liquid hydrogen flowing upward was measured at the pressures of 0.4, 0.7 and 1.1 MPa for wide ranges of flow rate and liquid temperature. Nine test heaters with different inner diameters of 3, 4, 6 and 9 mm and the lengths of 50, 100, 150, 200, 250 and 300 mm were used. The DNB (departure from nucleate boiling) heat fluxes in forced flow of liquid hydrogen were measured for various subcoolings and flow velocities at pressures of 0.4, 0.7 and 1.1 MPa. Effect of L/d (ratio of heater length to diameter) was clarified for the range of L / d ⩽ 50 . A new correlation of DNB heat flux was presented based on a simple model and the experimental data. Similar experiments were performed for liquid nitrogen at pressures of 0.5 MPa and 1.0 MPa by using the same experimental system and some of the test heaters. It was confirmed that the new correlation can describe not only the hydrogen data, but also the data of liquid nitrogen.

Canadian perspectives in evaluating transparency

International Nuclear Information System (INIS)

Herwig, L.

2007-01-01

The Canadian Nuclear Safety Commission's mission is to regulate the use of nuclear energy and materials to protect the health, safety, and security of Canadians and the environment, as well as to respect Canada's international commitments on the peaceful use of nuclear energy. In 2001, the CNSC established a vision to be one of the best nuclear regulators in the world and established four strategic priorities of effectiveness, transparency, excellence in staff, and efficiency. While fulfilling a very comprehensive mandate, the CNSC operates with a. very clear vision of its clientele - the Canadian people. That commitment guides every employee and every action of the CNSC and ensures a firm commitment to transparency. The presentation will begin with a brief overview of the worldwide context of transparency and transparency measurement, with a look at what lessons can be learned from other organizations and initiatives. It will look broadly at the Canadian context and the government framework that establishes transparency, including the keystone legislation of the Access to Information Act. The presentation will then focus on the Canadian Nuclear Safety Commission. The CNSC is firmly committed to putting additional measures in place to ensure transparency, which is being done concurrently with an overall organisational performance measurement system. It is within this framework that the presentation will address the transparency efforts at the CNSC as well transparency measurement activities. And, finally, the presentation will look at future directions for transparency and its measurement at the CNSC. (author)

Positron annihilation in transparent ceramics

Science.gov (United States)

Husband, P.; Bartošová, I.; Slugeň, V.; Selim, F. A.

2016-01-01

Transparent ceramics are emerging as excellent candidates for many photonic applications including laser, scintillation and illumination. However achieving perfect transparency is essential in these applications and requires high technology processing and complete understanding for the ceramic microstructure and its effect on the optical properties. Positron annihilation spectroscopy (PAS) is the perfect tool to study porosity and defects. It has been applied to investigate many ceramic structures; and transparent ceramics field may be greatly advanced by applying PAS. In this work positron lifetime (PLT) measurements were carried out in parallel with optical studies on yttrium aluminum garnet transparent ceramics in order to gain an understanding for their structure at the atomic level and its effect on the transparency and light scattering. The study confirmed that PAS can provide useful information on their microstructure and guide the technology of manufacturing and advancing transparent ceramics.

Positron annihilation in transparent ceramics

International Nuclear Information System (INIS)

Husband, P; Selim, F A; Bartošová, I; Slugeň, V

2016-01-01

Transparent ceramics are emerging as excellent candidates for many photonic applications including laser, scintillation and illumination. However achieving perfect transparency is essential in these applications and requires high technology processing and complete understanding for the ceramic microstructure and its effect on the optical properties. Positron annihilation spectroscopy (PAS) is the perfect tool to study porosity and defects. It has been applied to investigate many ceramic structures; and transparent ceramics field may be greatly advanced by applying PAS. In this work positron lifetime (PLT) measurements were carried out in parallel with optical studies on yttrium aluminum garnet transparent ceramics in order to gain an understanding for their structure at the atomic level and its effect on the transparency and light scattering. The study confirmed that PAS can provide useful information on their microstructure and guide the technology of manufacturing and advancing transparent ceramics. (paper)

Dominant investors and strategic transparency

NARCIS (Netherlands)

Perotti, E.C.; von Thadden, E.-L.

1998-01-01

This paper studies product market competition under a strategic transparency decision. Dominant investors can influence information collection in the financial market, and thereby corporate transparency, by affecting market liquidity or the cost of information collection. More transparency on a

Dominant investors and strategic transparency

NARCIS (Netherlands)

Perotti, E.C.; von Thadden, E.-L.

1999-01-01

This paper studies product market competition under a strategic transparency decision. Dominant investors can influence information collection in the financial market, and thereby corporate transparency, by affecting market liquidity or the cost of information collection. More transparency on a

Transparent Higher Order Sliding Mode Control for Nonlinear Master-Slave Systems without Velocity Measurement

Directory of Open Access Journals (Sweden)

Luis G. Garcia-Valdovinos

2015-04-01

Full Text Available Transparency has been a major objective in bilateral teleoperation systems, even in the absence of time delay induced by the communication channel, since a high degree of transparency would allow humans to drive the remote teleoperator as if he or she were directly interacting with the remote environment, with the remote teleoperator as a physical and sensorial extension of the operator. When fast convergence of position and force tracking errors are ensured by the control system, then complete transparency is obtained, which would ideally guarantee humans to be tightly kinaesthetically coupled. In this paper a model-free Cartesian second order sliding mode (SOSM PD control scheme for nonlinear master-slave systems is presented. The proposed scheme does not rely on velocity measurements and attains very fast convergence of position trajectories, with bounded tracking of force trajectories, rendering a high degree of transparency with lesser knowledge of the system. The degree of transparency can easily be improved by tuning a feedback gain in the force loop. A unique energy storage function is introduced; such that a similar Cartesian-based controller is implemented in the master and slave sides. The resulting properties of the Cartesian control structure allows the human operator to input directly Cartesian variables, which makes clearer the kinaesthetic coupling, thus the proposed controller becomes a suitable candidate for practical implementation. The performance of the proposed scheme is evaluated in a semi-experimental setup.

Privacy transparency patterns

NARCIS (Netherlands)

Siljee B.I.J.

2015-01-01

This paper describes two privacy patterns for creating privacy transparency: the Personal Data Table pattern and the Privacy Policy Icons pattern, as well as a full overview of privacy transparency patterns. It is a first step in creating a full set of privacy design patterns, which will aid

Aerospace Transparency Research Compendium

National Research Council Canada - National Science Library

Pinkus, Alan

2003-01-01

... (ARRL), located at Wright-Patterson AFB OH, has advanced aerospace transparency technology through the investigative research of numerous optical and visual parameters inherent in aerospace transparencies...

Semi-transparent solar energy thermal storage device

Science.gov (United States)

McClelland, John F.

1985-06-18

A visually transmitting solar energy absorbing thermal storage module includes a thermal storage liquid containment chamber defined by an interior solar absorber panel, an exterior transparent panel having a heat mirror surface substantially covering the exterior surface thereof and associated top, bottom and side walls, Evaporation of the thermal storage liquid is controlled by a low vapor pressure liquid layer that floats on and seals the top surface of the liquid. Porous filter plugs are placed in filler holes of the module. An algicide and a chelating compound are added to the liquid to control biological and chemical activity while retaining visual clarity. A plurality of modules may be supported in stacked relation by a support frame to form a thermal storage wall structure.

Information Exchange, Market Transparency and Dynamic Oligopoly

DEFF Research Database (Denmark)

Møllgaard, H. Peter; Overgaard, Per Baltzer

Economic literature often offers conflicting views on the likely efficiency effects of information exchanges, communication between firms, and market transparency. On the one hand, it is argued that increased information dissemination improves firm planning to the benefit of society (including...... buyers) and allows potential buyers to make correct decisions given their preferences. On the other hand, economic literature also shows that increased information dissemination can raise prices through tacit or explicit collusion to the benefit of firms but at the expense of society at large....... This chapter provides a general analytical framework to reconcile these views and presents some basic conclusions for antitrust practice. In addition, the chapter reviews cases from both sides of the Atlantic where informational issues have played a significant role....

Transparent Electrodes for Efficient Optoelectronics

KAUST Repository

Morales-Masis, Monica

2017-03-30

With the development of new generations of optoelectronic devices that combine high performance and novel functionalities (e.g., flexibility/bendability, adaptability, semi or full transparency), several classes of transparent electrodes have been developed in recent years. These range from optimized transparent conductive oxides (TCOs), which are historically the most commonly used transparent electrodes, to new electrodes made from nano- and 2D materials (e.g., metal nanowire networks and graphene), and to hybrid electrodes that integrate TCOs or dielectrics with nanowires, metal grids, or ultrathin metal films. Here, the most relevant transparent electrodes developed to date are introduced, their fundamental properties are described, and their materials are classified according to specific application requirements in high efficiency solar cells and flexible organic light-emitting diodes (OLEDs). This information serves as a guideline for selecting and developing appropriate transparent electrodes according to intended application requirements and functionality.

Transparent Electrodes for Efficient Optoelectronics

KAUST Repository

Morales-Masis, Monica; De Wolf, Stefaan; Woods-Robinson, Rachel; Ager, Joel W.; Ballif, Christophe

2017-01-01

With the development of new generations of optoelectronic devices that combine high performance and novel functionalities (e.g., flexibility/bendability, adaptability, semi or full transparency), several classes of transparent electrodes have been developed in recent years. These range from optimized transparent conductive oxides (TCOs), which are historically the most commonly used transparent electrodes, to new electrodes made from nano- and 2D materials (e.g., metal nanowire networks and graphene), and to hybrid electrodes that integrate TCOs or dielectrics with nanowires, metal grids, or ultrathin metal films. Here, the most relevant transparent electrodes developed to date are introduced, their fundamental properties are described, and their materials are classified according to specific application requirements in high efficiency solar cells and flexible organic light-emitting diodes (OLEDs). This information serves as a guideline for selecting and developing appropriate transparent electrodes according to intended application requirements and functionality.

Vortex shedding induced by a solitary wave propagating over a submerged vertical plate

International Nuclear Information System (INIS)

Lin Chang; Ho, T.-C.; Chang, S.-C.; Hsieh, S.-C.; Chang, K.-A.

2005-01-01

Experimental study was conducted on the vortex shedding process induced by the interaction between a solitary wave and a submerged vertical plate. Particle image velocimetry (PIV) was used for quantitative velocity measurement while a particle tracing technique was used for qualitative flow visualization. Vortices are generated at the tip of each side of the plate. The largest vortices at each side of the plate eventually grow to the size of the water depth. Although the fluid motion under the solitary wave is only translatory, vortices are shed in both the upstream and downstream directions due to the interaction of the generated vortices as well as the vortices with the plate and the bottom. The process can be divided into four phases: the formation of a separated shear layer, the generation and shedding of vortices, the formation of a vertical jet, and the impingement of the jet onto the free surface. Similarity velocity profiles were found both in the separated shear layer and in the vertical jet

A FRAMEWORK FOR TRANSPARENCY IN INTERNATIONAL TRADE

Directory of Open Access Journals (Sweden)

Bernal Turnes, Paloma

2015-01-01

Full Text Available The aim of this paper is to cover the gap in literature about transparency in the context of international trade facilitation. It focuses on the importance of transparency in achieving growth in international trade and the differences between non-transparent practices and corruption in global trade. Managing the disclosure of information about rules, regulations and laws is not the only trade policy instrument where transparency becomes important. To build a framework on levels of transparency we developed a matrix classifying the transparency of each country based on ease of doing business and levels of bribery. Four different strategies are explained based on the different scenarios of transparency in international trade. The main conclusions reflect that disclosure of information is not enough to guarantee transparency and monitoring of transparency must be improved.

Transparency as an element of public confidence

International Nuclear Information System (INIS)

Kim, H.K.

2007-01-01

In the modern society, there is increasing demands for greater transparency. It has been discussed with respect to corruption or ethics issues in social science. The need for greater openness and transparency in nuclear regulation is widely recognised as public expectations on regulator grow. It is also related to the digital and information technology that enables disclosures of every activity and information of individual and organisation, characterised by numerous 'small brothers'. Transparency has become a key word in this ubiquitous era. Transparency in regulatory activities needs to be understood in following contexts. First, transparency is one of elements to build public confidence in regulator and eventually to achieve regulatory goal of providing the public with satisfaction at nuclear safety. Transparent bases of competence, independence, ethics and integrity of working process of regulatory body would enhance public confidence. Second, activities transmitting information on nuclear safety and preparedness to be accessed are different types of transparency. Communication is an active method of transparency. With increasing use of web-sites, 'digital transparency' is also discussed as passive one. Transparency in regulatory process may be more important than that of contents. Simply providing more information is of little value and specific information may need to be protected for security reason. Third, transparency should be discussed in international, national and organizational perspectives. It has been demanded through international instruments. for each country, transparency is demanded by residents, public, NGOs, media and other stakeholders. Employees also demand more transparency in operating and regulatory organisations. Whistle-blower may appear unless they are satisfied. Fourth, pursuing transparency may cause undue social cost or adverse effects. Over-transparency may decrease public confidence and the process for transparency may also hinder

Phenomenal transparency in achromatic checkerboards.

Science.gov (United States)

Masin, S C

1999-04-01

The study explored the luminance relations that determine the occurrence of achromatic transparency in phenomenal surfaces on complex backgrounds. Let the luminances of the left and right parts of a transparent surface on a bipartite background and those of the left and right parts of the bipartite background be p and q and m and n, respectively. Metelli proposed that this surface looks transparent when the rule p q if m > n) is satisfied, and Masin and Fukuda that it looks transparent when the inclusion rule is satisfied, that is, when p epsilon (m, q) or q epsilon (p, n). These rules also apply to achromatic checkerboards formed by one checkerboard enclosed in another checkerboard. This study shows that only the inclusion rule correctly predicted the occurrence of transparency in these checkerboards.

Transparent conductor based on aluminum nanomesh

International Nuclear Information System (INIS)

Kazarkin, B; Mohammed, A S; Stsiapanau, A; Zhuk, S; Satskevich, Y; Smirnov, A

2014-01-01

We report a transparent conductor based on Al nanomesh, which was fabricated through Al anodization and etching processes. The Al anodization was performed at low temperature condition to slow down the anodization rate to achieve the well-controlled thickness of an Al nanomesh. By careful controlling of the anodization process, we can fabricate Al nanomesh transparent conductors with different sheet resistance and optical transparency in the visible spectrum range. We shall show that Al nanomesh transparent conductor is a strong contender for a transparent conductor dominated by ITO

Transparent platinum counter electrode for efficient semi-transparent dye-sensitized solar cells

Energy Technology Data Exchange (ETDEWEB)

Iefanova, Anastasiia; Nepal, Jeevan; Poudel, Prashant; Davoux, Daren; Gautam, Umesh [Electrical Engineering and Computer Science Department, South Dakota State University, Brookings, SD 57006 (United States); Mallam, Venkataiah [Chemistry and Biochemistry Department, South Dakota State University, Brookings, SD 57006 (United States); Qiao, Qiquan [Electrical Engineering and Computer Science Department, South Dakota State University, Brookings, SD 57006 (United States); Logue, Brian [Chemistry and Biochemistry Department, South Dakota State University, Brookings, SD 57006 (United States); Baroughi, Mahdi Farrokh, E-mail: m.farrokhbaroughi@sdstate.edu [Electrical Engineering and Computer Science Department, South Dakota State University, Brookings, SD 57006 (United States)

2014-07-01

A method for fabrication of highly transparent platinum counter electrodes (CEs) has been developed based on spray coating of Pt nanoparticles (NPs) on hot substrates. This method leads to 86% reduction in Pt consumption reducing the Pt cost per peak watt of counter electrode from $0.79/Wp down to $0.11/Wp compared to the conventional Pt counter electrodes made by sputter deposition. The simplicity and low cost of this method provide a basis for an up-scalable fabrication process. The Pt NP layer is over 88% transparent, leading to overall transparency of 80% when incorporated with indium tin oxide/glass substrates for functional counter electrodes. This counter electrode exhibits a large surface area and high catalytic activity, comparable to that of the conventional opaque CEs. Semi-transparent dye-sensitized solar cells fabricated based on this counter electrode showed 6.17% power conversion efficiency. - Highlights: • Counter electrode (CE) prepared by spraying nanoparticle (NP) Pt on hot substrate. • Low cost and scalable fabrication process of CE. • The spray deposited CE uses 10 times less Pt compared to the sputtering method. • The CE is 80% transparent and exhibits a large surface and high catalytic activity. • A semitransparent dye-sensitized solar cell with Pt NP CE was 6.17% efficient.

Narrative Transparency: Adopting a Rhetorical Stance

DEFF Research Database (Denmark)

Arnould, Eric; Press, Melea

2014-01-01

In this paper, we look at how alternative marketing organisations communicate transparency in a climate of generalised risk and scepticism. We contrast the traditional numeric approach to transparency, which involves auditing and third-party certifications; with an alternative approach that we call...... narrative transparency. Central to narrative transparency is an emphasis on stake-holder dialogue and an invitation to stake-holders to play the role of auditor. This article illustrates how alternative marketing organisations engage in rhetorical tactics central to a narrative approach, to communicate...... transparency to their stakeholders. These rhetorical tactics include persona, allegory, consumer sovereignty and enlightenment. Community supported agriculture programmes from across the United States are the context for this study. Findings enrich discussions about best practices for transparency...

2-D Reflectometer Modeling for Optimizing the ITER Low-field Side Reflectometer System

International Nuclear Information System (INIS)

Kramer, G.J.; Nazikian, R.; Valeo, E.J.; Budny, R.V.; Kessel, C.; Johnson, D.

2005-01-01

The response of a low-field side reflectometer system for ITER is simulated with a 2?D reflectometer code using a realistic plasma equilibrium. It is found that the reflected beam will often miss its launch point by as much as 40 cm and that a vertical array of receiving antennas is essential in order to observe a reflection on the low-field side of ITER

Side-looking underground radar (SLUR): Physical modeling and case history

International Nuclear Information System (INIS)

Daniels, J.J.; Brower, J.

1998-01-01

A modification of conventional surface ground-penetrating radar (GPR) was conceived, tested, and successfully applied in the field at Brookhaven National Laboratory (BNL) to investigate waste pits. The modified GPR method consists of making measurements along a traverse line in a sloping trench with the radar's antenna oriented at an angle of up to 45 degree from the horizontal. The direction of propagation of the electromagnetic field for this configuration is not vertical, and the amount of energy scattered from objects that are oriented vertically relative to the energy scattered from horizontal layers is increased. This fundamental feature of side-looking underground radar (SLUR) measurements is illustrated by physical modeling. Measurements made along parallel trenches that are offset at different distances from a vertically oriented object provides GPR cross-sections with a primary plane of investigation that intersects the vertical feature at different depths. SLUR was used at BNL in conjunction with conventional surface GPR measurements (displayed as 3-D blocks and plan-view time slices) to enhance the vertical definition and improve the depth estimates of the waste pits

Robot transparency, trust and utility

Science.gov (United States)

Wortham, Robert H.; Theodorou, Andreas

2017-07-01

As robot reasoning becomes more complex, debugging becomes increasingly hard based solely on observable behaviour, even for robot designers and technical specialists. Similarly, non-specialist users have difficulty creating useful mental models of robot reasoning from observations of robot behaviour. The EPSRC Principles of Robotics mandate that our artefacts should be transparent, but what does this mean in practice, and how does transparency affect both trust and utility? We investigate this relationship in the literature and find it to be complex, particularly in nonindustrial environments where, depending on the application and purpose of the robot, transparency may have a wider range of effects on trust and utility. We outline our programme of research to support our assertion that it is nevertheless possible to create transparent agents that are emotionally engaging despite having a transparent machine nature.

Transparency in high-energy nuclear collisions

International Nuclear Information System (INIS)

Karol, P.J.

1992-01-01

Problems associated with transparency schemes based on sharp cutoff models are discussed. The soft spheres model of hadron-nucleus and nucleus-nucleus collisions has been used to explore the influence of the realistic nuclear density geometry on transparency. An average nuclear transparency and an average reaction transparency are defined and their dependence on target and projectile dimensions and on the hadron-nucleon collision cross section are described. The results are expected to be valid for projectile energies above several hundred MeV/nucleon through the ultrarelativistic regime. For uniform (hard sphere) nuclear profiles, methods for obtaining effective total transparencies are suggested

Numerical analysis of mixing process of two component gases in vertical fluid layer

International Nuclear Information System (INIS)

Hatori, Hirofumi; Takeda, Tetsuaki; Funatani, Shumpei

2015-01-01

When the depressurization accident occurs in the Very-High-Temperature Reactor (VHTR), it is expected that air enter into the reactor core. Therefore, it is important to know a mixing process of different kind of gases in the stable or unstable stratified fluid layer. Especially, it is also important to examine an influence of localized natural convection and molecular diffusion on mixing process from a viewpoint of safety. In order to research the mixing process of two component gases and flow characteristics of the localized natural convection, we have carried out numerical analysis using three dimensional CFD code. The numerical model was consisted of a storage tank and a reverse U-shaped vertical slot. They were separated by a partition plate. One side of the left vertical fluid layer was heated and the other side was cooled. The right vertical fluid layer was also cooled. The procedure of numerical analysis is as follows. Firstly, the storage tank was filled with heavy gas and the reverse U-shaped vertical slot was filled with light gas. In the left vertical fluid layer, the localized natural convection was generated by the temperature difference between the vertical walls. The flow characteristics were obtained by a steady state analysis. The unsteady state analysis was started when the partition plate was opened. The gases were mixed by molecular diffusion and natural convection. After the time elapsed, natural circulation occurred. The result obtained in this numerical analysis is as follows. The temperature difference of the left vertical fluid layer was set to 100 K. The combination of the mixed gas was nitrogen and argon. After 76 minutes elapsed, natural circulation occurred. (author)

Chewing side, bite force symmetry, and occlusal contact area of subjects with different facial vertical patterns

Directory of Open Access Journals (Sweden)

Simone Guimarães Farias Gomes

2011-10-01

Full Text Available Craniofacial dimensions influence oral functions; however, it is not known whether they are associated with function asymmetry. The objective of this study was to evaluate chewing side preference and lateral asymmetry of occlusal contact area and bite force of individuals with different craniofacial patterns. Seventy-eight dentate subjects were divided into 3 groups according to the VERT index as follows: (1 mesofacial, (2 brachyfacial and (3 dolichofacial. Chewing side preference was evaluated using jaw tracking equipment, occlusal contact area was measured by silicon registration of posterior teeth, and bite force was measured unilaterally on molar regions using 2.25 mm-thick sensors. Statistical analysis was performed using ANOVA on Ranks, Student's t-test, and Mann-Whitney tests at a 5% significance level. Mesofacial, brachyfacial, and dolichofacial subjects presented more occlusal contact area on the left side. Only dolichofacial subjects showed lateral asymmetry for bite force, presenting higher force on the left side. No statistically significant differences were found for chewing side preference among all groups. Within the limitations of this study, it can be concluded that craniofacial dimensions play a role in asymmetry of bite force. ClinicalTrials.gov ID: NCT01286363.

Vertical retort with arrangements for special heating, etc

Energy Technology Data Exchange (ETDEWEB)

Hengstenberg, R

1922-02-28

A vertical retort with arrangements for special heating of upper and lower zones and special gas outlets on the highest and lowest parts of the retort is characterized in that the lower gas outlet on the one side serves for feeding the burner for heating both upper zone as well as the lower, and on the other side runs to the collecting line for the gas, which emerges from the upper opening, while on the lower end of the retort is fastened a coke cooler, whose walls can be cooled with air supplied for the drying of the combustibles or with water, which is supplied for the steam generation.

Transparency of Banking Supervisors

NARCIS (Netherlands)

Liedorp, Franka; Mosch, Robert; van der Cruijsen, Carin; de Haan, Jakob

Following Eijffinger and Geraats (2006), this paper constructs an index of transparency of banking supervisors that takes political, economic, procedural, policy, and operational transparency into account. Based on a survey, the index is constructed for 24 banking supervisors. The average score is

Introduction: The Transparency Issue

NARCIS (Netherlands)

Teurlings, J.; Stauff, M.

2014-01-01

Besides giving an overview on the individual contributions, this introduction to the special issue on transparency delineates a conceptual context for a critical analysis of the contemporary discourse on transparency and the media mechanisms related to it. It focuses on three ambivalences inherent

Optically transparent semiconducting polymer nanonetwork for flexible and transparent electronics

Science.gov (United States)

Yu, Kilho; Park, Byoungwook; Kim, Geunjin; Kim, Chang-Hyun; Park, Sungjun; Kim, Jehan; Jung, Suhyun; Jeong, Soyeong; Kwon, Sooncheol; Kang, Hongkyu; Kim, Junghwan; Yoon, Myung-Han; Lee, Kwanghee

2016-01-01

Simultaneously achieving high optical transparency and excellent charge mobility in semiconducting polymers has presented a challenge for the application of these materials in future “flexible” and “transparent” electronics (FTEs). Here, by blending only a small amount (∼15 wt %) of a diketopyrrolopyrrole-based semiconducting polymer (DPP2T) into an inert polystyrene (PS) matrix, we introduce a polymer blend system that demonstrates both high field-effect transistor (FET) mobility and excellent optical transparency that approaches 100%. We discover that in a PS matrix, DPP2T forms a web-like, continuously connected nanonetwork that spreads throughout the thin film and provides highly efficient 2D charge pathways through extended intrachain conjugation. The remarkable physical properties achieved using our approach enable us to develop prototype high-performance FTE devices, including colorless all-polymer FET arrays and fully transparent FET-integrated polymer light-emitting diodes. PMID:27911774

Optimal viewing position in vertically and horizontally presented Japanese words.

Science.gov (United States)

Kajii, N; Osaka, N

2000-11-01

In the present study, the optimal viewing position (OVP) phenomenon in Japanese Hiragana was investigated, with special reference to a comparison between the vertical and the horizontal meridians in the visual field. In the first experiment, word recognition scores were determined while the eyes were fixating predetermined locations in vertically and horizontally displayed words. Similar to what has been reported for Roman scripts, OVP curves, which were asymmetric with respect to the beginning of words, were observed in both conditions. However, this asymmetry was less pronounced for vertically than for horizontally displayed words. In the second experiment, the visibility of individual characters within strings was examined for the vertical and horizontal meridians. As for Roman characters, letter identification scores were better in the right than in the left visual field. However, identification scores did not differ between the upper and the lower sides of fixation along the vertical meridian. The results showed that the model proposed by Nazir, O'Regan, and Jacobs (1991) cannot entirely account for the OVP phenomenon. A model in which visual and lexical factors are combined is proposed instead.

Pixel masks for screen-door transparency

NARCIS (Netherlands)

J.D. Mulder (Jurriaan); F.C.A. Groen; J.J. van Wijk (Jack)

1998-01-01

textabstractRendering objects transparently gives additional insight in complex and overlapping structures. However, traditional techniques for the rendering of transparent objects such as alpha blending are not very well suited for the rendering of multiple transparent objects in dynamic scenes.

Advice on Admissions Transparency

Science.gov (United States)

Australian Government Tertiary Education Quality and Standards Agency, 2018

2018-01-01

Admissions transparency means that prospective domestic undergraduate students can easily find good quality admissions information that allows them to compare courses and providers and make informed study choices. In October 2016 the Higher Education Standards Panel (HESP) made recommendations to achieve greater transparency in higher education…

Can transparency be measured - a look ahead

International Nuclear Information System (INIS)

Jorle, A.

2007-01-01

The simple answer to this question is no. But if you define the expression and decide transparency actually is, the answer might be different. Transparency means different things in different places. In one country transparency meant almost total access to anything that a government authority has in its possession. In another country transparency is more strict access to certain decisions, decisions makers or documents written with the sole purpose of informing the public. What variables could be found in the word transparent, what is a transparent regulator? In this short presentation we will deal with some important settings or fundamental prerequisites for a regulator calling itself transparent. Perhaps we should look at them in order of importance. Some days it is difficult to do all at once. As a final point, if we as regulators wish to call ourselves transparent in a future with diminishing national borders, fast electronic communication and increasing world wide media impact, what does the world require from us as regulators? (author)

CONDENSATION OF WATER VAPOR IN A VERTICAL TUBE CONDENSER

Directory of Open Access Journals (Sweden)

Jan Havlík

2015-10-01

Full Text Available This paper presents an analysis of heat transfer in the process of condensation of water vapor in a vertical shell-and-tube condenser. We analyze the use of the Nusselt model for calculating the condensation heat transfer coefficient (HTC inside a vertical tube and the Kern, Bell-Delaware and Stream-flow analysis methods for calculating the shell-side HTC from tubes to cooling water. These methods are experimentally verified for a specific condenser of waste process vapor containing air. The operating conditions of the condenser may be different from the assumptions adopted in the basic Nusselt theory. Modifications to the Nusselt condensation model are theoretically analyzed.

Isolated left-sided partial anomalous pulmonary venous connection in a child.

Science.gov (United States)

Onan, İsmihan Selen; Sen, Onur; Gökalp, Selman; Onan, Burak

2017-09-01

Isolated left-sided partial anomalous pulmonary venous connection with intact interatrial septum is a rare diagnosis in childhood. In these cases, a vertical vein drains the left upper pulmonary lobe into the brachiocephalic vein and finally to the right atrium. Surgical treatment is performed to prevent right ventricular failure and pulmonary artery disease in advanced age. In this report, the rare entity of isolated left-sided anomalous pulmonary venous connection in a 14-year-old girl and successful minimally invasive surgery without cardiopulmonary bypass are described.

Vertical-cavity laser with a novel grating mirror

DEFF Research Database (Denmark)

Park, Gyeong Cheol

Hybrid III-V on silicon (Si) ‘vertical cavity lasers’ (hybrid VCLs), which can emit light laterally into a Si waveguide, are fabricated and investigated. The Si-integrated hybrid VCL consists of a top dielectric Bragg reflector (DBR), a III-V active layer, and a bottom high contrast grating (HCG...... the vertical cavity laterally into the Si waveguide. The measured inplane emission proves the lasing action with a side-mode suppression ratio (SMSR) of 27.5 dB at a peak wavelength of 1486 nm. The threshold pumping power corresponds to a current injection of 1.1 mA. A signature of highly anisotropic cavity...... dispersion has been observed and discussed, which is unique for HCG-based vertical cavities. The second version proves the potential for high-speed operation of hybrid VCL structure. In the hybrid VCL structure, the effective cavity length is substantially reduced by using a dielectric DBR and a TM...

A Concise Dictionary of Transparency

Directory of Open Access Journals (Sweden)

Jakub Misun

2013-01-01

Full Text Available The article discusses an essay collection by Marek Bieńczyk, Przeźroczystość [Transparency]. The concept, placed in various context, shows various aspects and is seen in various shades. The author does not put forward a statement, but rather proposes a work to be done: to determine the modality of transparency. The concept initially seems to be mainly epistemological: the cognizant subject would like to make the world transparent, to discover all possible mysteries. Before that, however, the subject must know itself, and here the dream of trans­parency also plays the key role. Lack of epistemological transparency is the main cause of melancholy and its reverse — hysteria. The concept turns out to be important in the domain of love — the loer thinks that (she knows the desired person more better anybody else, that (she has entirely penetrated the subjectivity of the Other. Ultimately, however, the dream of transparency goes down to a slow demise of the subject: as self-discovery progresses, there is less and less of the discoverer. In conclusion of this work, the border of modality of the concept turns out to be horrifyingly obvious. The desire for transparency consequently searches not for knowledge, but for an escape whose name is death.

Transparency in port-Hamiltonian based telemanipulation

NARCIS (Netherlands)

Secchi, C; Stramigioli, Stefano; Fantuzzi, C.

2005-01-01

After stability, transparency is the major issue in the design of a telemanipulation system. In this paper we exploit a behavioral approach in order to provide an index for the evaluation of transparency in port-Hamiltonian based teleoperators. Furthermore we provide a transparency analysis of

Transparency in Port-Hamiltonian-Based Telemanipulation

NARCIS (Netherlands)

Secchi, Cristian; Stramigioli, Stefano; Fantuzzi, Cesare

After stability, transparency is the major issue in the design of a telemanipulation system. In this paper, we exploit the behavioral approach in order to provide an index for the evaluation of transparency in port-Hamiltonian-based teleoperators. Furthermore, we provide a transparency analysis of

Budget transparency in local governments

OpenAIRE

Giménez Perona, Paloma

2014-01-01

Treball Final de Grau en Finances i Comptabilitat. Codi: FC1049. Curs acadèmic 2013-2014 This work will study the socio-demographic determinants, political, budgetary and economic, that affect the transparency of local entities. To perform the study, we have chosen the transparency index data for the 110 largest municipalities of Spain, in 2012 has been chosen from the information offered by the website of the organization Transparency International Spain. The results indica...

Lutetium oxide-based transparent ceramic scintillators

Science.gov (United States)

Seeley, Zachary; Cherepy, Nerine; Kuntz, Joshua; Payne, Stephen A.

2016-01-19

In one embodiment, a transparent ceramic of sintered nanoparticles includes gadolinium lutetium oxide doped with europium having a chemical composition (Lu.sub.1-xGd.sub.x).sub.2-YEu.sub.YO.sub.3, where X is any value within a range from about 0.05 to about 0.45 and Y is any value within a range from about 0.01 to about 0.2, and where the transparent ceramic exhibits a transparency characterized by a scatter coefficient of less than about 10%/cm. In another embodiment, a transparent ceramic scintillator of sintered nanoparticles, includes a body of sintered nanoparticles including gadolinium lutetium oxide doped with a rare earth activator (RE) having a chemical composition (Lu.sub.1-xGd.sub.x).sub.2-YRE.sub.YO.sub.3, where RE is selected from the group consisting of: Sm, Eu, Tb, and Dy, where the transparent ceramic exhibits a transparency characterized by a scatter coefficient of less than about 10%/cm.

Epilogue: degrees of transparency

NARCIS (Netherlands)

Hengeveld, K.

2011-01-01

In this epilogue the results of the analyses of four different languages in the preceding papers are compared. It is shown that the degrees of transparency of these languages can be represented on an implicational scale, and that the features themselves can be ranked on a transparency scale as well.

Hybrid vertical-cavity laser with lateral emission into a silicon waveguide

DEFF Research Database (Denmark)

Park, Gyeong Cheol; Xue, Weiqi; Taghizadeh, Alireza

2015-01-01

into the waveguide integrated with the laser. This laser has the advantages of long-wavelength vertical-cavity surface-emitting lasers, such as low threshold and high side-mode suppression ratio, while allowing integration with silicon photonic circuits, and is fabricated using CMOS compatible processes. It has......We experimentally demonstrate an optically-pumped III-V/Si vertical-cavity laser with lateral emission into a silicon waveguide. This on-chip hybrid laser comprises a distributed Bragg reflector, a III-V active layer, and a high-contrast grating reflector, which simultaneously funnels light...

Through a glass darkly - the meaning of transparency

International Nuclear Information System (INIS)

Loy, J.

2007-01-01

The paper first discusses the word 'transparency'. It is a metaphor drawn from optics; it is a term used in social and political science; the international civil society organisation. 'Transparency International' sees it as the paradigm to fight corruption in the world. From this discussion, the paper offers a working definition applicable to a nuclear regulatory organisation. The paper describes a difference between having transparent process, which might be called passive transparency; and transparent engagement with stakeholders -- active transparency. It discusses some of the issues and problems that arise for a nuclear regulatory organisation seeking to operate transparently. Much of the difficulty with true transparency is that it reveals the 'untidiness' of life. 'We see now as through a glass darkly'. What is the general view of society and the cultural attitudes towards Government agencies revealing that they are not perfect'? Can you have a transparent nuclear regulator of a secretive industry and with other stakeholders having political agendas? How can a technical 'judgment call' ever be fully transparent? Can an active culture of transparency sometimes result in a mere public relations campaign? Can transparency in a nuclear regulatory create expectations amongst stakeholders that will prove impossible to meet? These questions are discussed with some real-life examples. The paper concludes with some suggested 'fundamentals' for transparency in nuclear regulatory organisations. (author)

Practice Variation in Big-4 Transparency Reports

DEFF Research Database (Denmark)

Girdhar, Sakshi; Klarskov Jeppesen, Kim

2018-01-01

Purpose: The purpose of this paper is to examine the transparency reports published by the Big-4 public accounting firms in the UK, Germany and Denmark to understand the determinants of their content within the networks of big accounting firms. Design/methodology/approach: The study draws...... on a qualitative research approach, in which the content of transparency reports is analyzed and semi-structured interviews are conducted with key people from the Big-4 firms who are responsible for developing the transparency reports. Findings: The findings show that the content of transparency reports...... is inconsistent and the transparency reporting practice is not uniform within the Big-4 networks. Differences were found in the way in which the transparency reporting practices are coordinated globally by the respective central governing bodies of the Big-4. The content of the transparency reports...

File: nuclear safety and transparency

International Nuclear Information System (INIS)

Martinez, J.P.; Etchegoyen, A.; Jeandron, C.

2001-01-01

Several experiences of nuclear safety and transparency are related in this file. Public information, access to documents, transparency in nuclear regulation are such subjects developed in this debate. (N.C.)

Transparency in Cooperative Online Education

DEFF Research Database (Denmark)

Dalsgaard, Christian; Paulsen, Morten Flate

2009-01-01

The purpose of this article is to discuss the following question: What is the potential of social networking within cooperative online education? Social networking does not necessarily involve communication, dialogue, or collaboration. Instead, the authors argue that transparency is a unique...... feature of social networking services. Transparency gives students insight into each other’s actions. Cooperative learning seeks to develop virtual learning environments that allow students to have optimal individual freedom within online learning communities. This article demonstrates how cooperative...... learning can be supported by transparency. To illustrate this with current examples, the article presents NKI Distance Education’s surveys and experiences with cooperative learning. The article discusses by which means social networking and transparency may be utilized within cooperative online education...

Transparent Ferroelectric Capacitors on Glass

Directory of Open Access Journals (Sweden)

Daniele Sette

2017-10-01

Full Text Available We deposited transparent ferroelectric lead zirconate titanate thin films on fused silica and contacted them via Al-doped zinc oxide (AZO transparent electrodes with an interdigitated electrode (IDE design. These layers, together with a TiO2 buffer layer on the fused silica substrate, are highly transparent (>60% in the visible optical range. Fully crystallized Pb(Zr0.52Ti0.48O3 (PZT films are dielectrically functional and exhibit a typical ferroelectric polarization loop with a remanent polarization of 15 μC/cm2. The permittivity value of 650, obtained with IDE AZO electrodes is equivalent to the one measured with Pt electrodes patterned with the same design, which proves the high quality of the developed transparent structures.

Transmission in Optically Transparent Core Networks

Science.gov (United States)

Kilper, Dan; Jensen, Rich; Petermann, Klaus; Karasek, Miroslav

2007-03-01

Call for Papers: Transmission in Optically Transparent Core Networks Guest Feature Editors Dan Kilper and Rich Jensen, Coordinating Associate Editors Klaus Petermann and Miroslav Karasek, Guest Feature Editors Submission deadline: 15 June 2007 Optically transparent networks in which optical transport signals are routed uninterrupted through multiple nodes have long been viewed as an important evolutionary step in fiber optic communications. More than a decade of research and development on transparent network technologies together with the requisite traffic growth has culminated in the recent deployment of commercial optically transparent systems. Although many of the traditional research goals of optical transmission remain important, optical transparency introduces new challenges. Greater emphasis is placed on system efficiency and control. The goal of minimizing signal terminations, which has been pursued through increasing reach and channel capacity, also can be realized through wavelength routing techniques. Rather than bounding system operation by rigid engineering rules, the physical layer is controlled and managed by automation tools. Many static signal impairments become dynamic due to network reconfiguration and transient fault events. Recently new directions in transmission research have emerged to address transparent networking problems. This special issue of the Journal of Optical Networking will examine the technologies and theory underpinning transmission in optically transparent core networks, including both metropolitan and long haul systems. Scope of Submission The special issue editors are soliciting high-quality original research papers related to transmission in optically transparent core networks. Although this does not include edge networks such as access or enterprise networks, core networks that have access capabilities will be considered in scope as will topics related to the interworking between core and edge networks. The core network

Privacy-Preserving Transparency-Enhancing Tools

OpenAIRE

Pulls, Tobias

2012-01-01

Transparency is a key principle in democratic societies. For example, the public sector is in part kept honest and fair with the help of transparency through different freedom of information (FOI) legislations. In the last decades, while FOI legislations have been adopted by more and more countries worldwide, we have entered the information age enabled by the rapid development of information technology. This has led to the need for technological solutions that enhance transparency, for exampl...

Organizational Transparency as Myth and Metaphor

DEFF Research Database (Denmark)

Christensen, Lars Thøger; Cornelissen, Joep

2015-01-01

Transparency has achieved a mythical status in society. Myths are not false accounts or understandings, but deep-seated and definitive descriptions of the world that ontologically ground the ways in which we frame and see the world around us. We explore the mythical nature of transparency from...... of the transparency myth....

Does transparent government agencies strengthen trust?

NARCIS (Netherlands)

Grimmelikhuijsen, S.G.

2009-01-01

Trust in government has been shown to be volatile in recent years and Internet transparency is seen as a solution to strengthen trust. However, critics argue that transparency will only lead to less trust, and sceptics say that it has no effect at all. This debate on transparency is lacking

Response of ramus following vertical lengthening with distraction osteogenesis.

Science.gov (United States)

Tuzuner-Oncul, Aysegul Mine; Kisnisci, Reha S

2011-09-01

Vertical lengthening of the mandibular ramus is considered to be one of the least stable surgical procedures in the management of musculoskeletal maxillofacial deformities. The aim of this study was to evaluate the response of the mandibular ramus following vertical lengthening by means of distraction osteogenesis. This study included eight non-syndromic adult patients with temporomandibular joint ankylosis. The vertical height deficiency of the mandibular ramus and the ramus/condyle unit on the affected side were simultaneously reconstructed by transportation of a bone segment using distraction osteogenesis following gap arthroplasty. Lateral and posteroanterior (PA) cephalograms taken postoperatively before active distraction, at the completion of distraction and 6, 12, 24 months after distraction, were compared to evaluate the changes of the ramus height. In all cases the vertical ramus and ramus/condyle unit height loss were successfully reconstructed by distraction osteogenesis. There was no relapse in the amount of height gained by distraction osteogenesis at the 24 months follow-up review (p>0.05). Acute one stage vertical lengthening of the mandibular ramus is considered to be one of the least stable musculoskeletal procedures with relapse being a significant adverse outcome. In this clinical study gradual vertical lengthening of the ramus through ramus/condyle unit distraction osteogenesis has maintained the initial vertical ramus height gained for 24 months. Copyright © 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Low-resistivity photon-transparent window attached to photo-sensitive silicon detector

International Nuclear Information System (INIS)

Holland, S.E.

2000-01-01

The invention comprises a combination of a low resistivity, or electrically conducting, silicon layer that is transparent to long or short wavelength photons and is attached to the backside of a photon-sensitive layer of silicon, such as a silicon wafer or chip. The window is applied to photon sensitive silicon devices such as photodiodes, charge-coupled devices, active pixel sensors, low-energy x-ray sensors and other radiation detectors. The silicon window is applied to the back side of a photosensitive silicon wafer or chip so that photons can illuminate the device from the backside without interference from the circuit printed on the frontside. A voltage sufficient to fully deplete the high-resistivity photosensitive silicon volume of charge carriers is applied between the low-resistivity back window and the front, patterned, side of the device. This allows photon-induced charge created at the backside to reach the front side of the device and to be processed by any circuitry attached to the front side. Using the inventive combination, the photon sensitive silicon layer does not need to be thinned beyond standard fabrication methods in order to achieve full charge-depletion in the silicon volume. In one embodiment, the inventive backside window is applied to high resistivity silicon to allow backside illumination while maintaining charge isolation in CCD pixels

Transparent Armor Cost Benefit Study

National Research Council Canada - National Science Library

Prokurat Franks, Lisa; Holm, David; Barnak, Rick

2006-01-01

...; the increase in demand for transparent gun shields in Operation Iraqi Freedom (OIF) and early versions of jerry-rigged shields used in OIF, including Pope glass and Transparent Armored Gun Shields (TAGS...

Exploring Quantitative Framework to Evaluate Nuclear Transparency

International Nuclear Information System (INIS)

Ha, Jeemin; Yim, Mansung; Park, Hyeon Seok

2014-01-01

In this work, a definition of nuclear transparency is elaborated and ways to represent a country's nuclear transparency are examined. For evaluating nuclear transparency, it is necessary to define three elements first; an information seeker who wants to see, an information seek whom an information seeker wants to see, and information related to nuclear materials and activities. The States with high capacity of civilian nuclear power had a tendency to follow IAEA safeguards agreements well. And it means that their levels of the transparency are relatively high. Besides, the data of international assurances is one of the good indicators to confirm States' transparency. The current study explored the use of two measures, IAEA safeguards and voluntary reporting as a way to represent nuclear transparency. Using these measures seemed to agree with the notion that nuclear transparency is important in the success of civilian nuclear power development

Wet-Chemical Preparation of Silicon Tunnel Oxides for Transparent Passivated Contacts in Crystalline Silicon Solar Cells.

Science.gov (United States)

Köhler, Malte; Pomaska, Manuel; Lentz, Florian; Finger, Friedhelm; Rau, Uwe; Ding, Kaining

2018-05-02

Transparent passivated contacts (TPCs) using a wide band gap microcrystalline silicon carbide (μc-SiC:H(n)), silicon tunnel oxide (SiO 2 ) stack are an alternative to amorphous silicon-based contacts for the front side of silicon heterojunction solar cells. In a systematic study of the μc-SiC:H(n)/SiO 2 /c-Si contact, we investigated selected wet-chemical oxidation methods for the formation of ultrathin SiO 2 , in order to passivate the silicon surface while ensuring a low contact resistivity. By tuning the SiO 2 properties, implied open-circuit voltages of 714 mV and contact resistivities of 32 mΩ cm 2 were achieved using μc-SiC:H(n)/SiO 2 /c-Si as transparent passivated contacts.

Transparency

NARCIS (Netherlands)

Gupta, A.; Mason, M.

2015-01-01

Transparency, as information disclosure, is becoming a widely accepted norm and set of practices in global climate governance. Disclosure of climate-related information is mainly seen as a way to monitor and/or reward various actors’ climate mitigation actions, thereby contributing, at least in

Lines that induce phenomenal transparency.

Science.gov (United States)

Grieco, Alba; Roncato, Sergio

2005-01-01

Three neighbouring opaque surfaces may appear split into two layers, one transparent and one opaque beneath, if an outline contour is drawn that encompasses two of them. The phenomenon was originally observed by Kanizsa [1955 Rivista di Psicologia 69 3-19; 1979 Organization in Vision: Essays on Gestalt Psychology (New York: Praeger)], for the case where an outline contour is drawn to encompass one of the two parts of a bicoloured figure and a portion of a background of lightest (or darkest) luminance. Preliminary observations revealed that the outline contour yields different effects: in addition to the stratification into layers described by Kanizsa, a second split, opposite in depth order, may occur when the outline contour is close in luminance to one of the three surfaces. An initial experiment was designed to investigate what conditions give rise to the two phenomenal transparencies: this led to the conclusion that an outline contour superimposed on an opaque surface causes this surface to emerge as a transparent layer when the luminances of the contour and the surface differ, in absolute value, by no more than 13.2 cd m(-2). We have named this phenomenon 'transparency of the intercepted surface', to distinguish it from the phenomenal transparency arising when the contour and surface are very different in luminance. When such a difference exists, the contour acts as a factor of surface definition and grouping: the portion of the homogeneous surface it bounds emerges as a fourth surface and groups with a nearby surface if there is one close in luminance. The transparency phenomena ('transparency of the contoured surface') perceived in this context conform to the constraints of Metelli's model, as demonstrated by a second experiment, designed to gather 'opacity' ratings of stimuli. The observer judgments conformed to the values predicted by Metelli's formula for perceived degree of transparency, alpha. The role of the outline contour in conveying figural and

Interaction between social influence and payoff transparency.

Science.gov (United States)

Zhou, Xinyue; Xie, Wenwen; Ye, Maolin

2014-02-01

Social influence and payoff transparency interact with each other to influence decision making. Social influence masks payoff transparency, and lacking transparency drives people to seek social influence. Moreover, our survey supports our claim by showing that social influence and payoff transparency correlate with each other (r(53) = -.71). Bentley et al.'s model can be revised to accommodate the covariance.

Transparency and nonproliferation in the Asia-Pacific region. Enhancing transparency, strengthening the nonproliferation regime

International Nuclear Information System (INIS)

Hamada, Kazuko

2008-01-01

Driven by the prospect of rapid economic growth and the perceived need for energy security, the Asia-Pacific region is destined to increase its nuclear energy use in the coming decades. This projected increase, however, will bring with it nuclear proliferation concerns, fueling fears about the security of nuclear material and creating suspicions about its use. The increasing use of nuclear energy inevitably necessitates supplementary efforts, designed to ensure nuclear security and a legitimate use of nuclear energy, other than the obligation to the Treaty on the Nonproliferation of Nuclear Weapons (NPT). Nuclear transparency measures could be useful tools for building confidence that the increasing nuclear energy use does not contribute to nuclear proliferation. These measures could also foster a cooperative tradition that can address rising concerns over nuclear trafficking and terrorism, which require regional coordination to combat. However, moderate progress in implementing transparency measures suggests a lack of political appreciation of this concept. Thus, this paper describes various forms of potential transparency measures to expand the possibilities of the transparency concept and explore areas in which this concept might be applicable. This paper also clarifies some challenges involving transparency projects, and suggests possible ways to address these challenges. (author)

Optimal Sample Size Determinations for the Heteroscedastic Two One-Sided Tests of Mean Equivalence: Design Schemes and Software Implementations

Science.gov (United States)

Jan, Show-Li; Shieh, Gwowen

2017-01-01

Equivalence assessment is becoming an increasingly important topic in many application areas including behavioral and social sciences research. Although there exist more powerful tests, the two one-sided tests (TOST) procedure is a technically transparent and widely accepted method for establishing statistical equivalence. Alternatively, a direct…

Transparência: Bacen versus BoE

Directory of Open Access Journals (Sweden)

Eduardo de Carvalho Andrade

2005-12-01

Full Text Available Transparency: Bacen versus BoE. The aim of this paper is to compare the degree of transparency of the Brazilian Central Bank (Bacen with the one verified in the Bank of England (BoE. In order to accomplish this objective, an indicator of transparency is built based on the information that each central bank provides to the public about its monetary policy, its expectation about the future of the economy, its intervention in the financial market, and if there are clear limits and restrictions to the release of information to the general public. The analysis suggests that the Bacen is less transparent and has a less individualistic Monetary Policy Committee in comparison with the BoE. Moreover, it indicates some procedures that could be adopted by the Bacen in order to make its monetary policy more transparent.

Supporting Transparency between Students

DEFF Research Database (Denmark)

Dalsgaard, Christian

The paper presents the results of a case study that explores the potentials of weblogs and social bookmarking to support transparency in a university course. In the course, groups of students used weblogs and social bookmarking in their work. The objective of the case was to empower students...... by providing them with tools that would be visible to the other students in the course, thus, making students’ ideas, thoughts and questions visible to the other students in the course. The paper concludes that use of digital media for transparency can support empowerment of students and inspiration among...... students in a course, but that the challenge is to create a balance between personal tools and tools for collaborative group work that are also suitable for transparency between students....

Vertically grown Ge nanowire Schottky diodes on Si and Ge substrates

Science.gov (United States)

Chandra, Nishant; Tracy, Clarence J.; Cho, Jeong-Hyun; Picraux, S. T.; Hathwar, Raghuraj; Goodnick, Stephen M.

2015-07-01

The processing and performance of Schottky diodes formed from arrays of vertical Ge nanowires (NWs) grown on Ge and Si substrates are reported. The goal of this work is to investigate CMOS compatible processes for integrating NWs as components of vertically scaled integrated circuits, and elucidate transport in vertical Schottky NWs. Vertical phosphorus (P) doped Ge NWs were grown using vapor-liquid-solid epitaxy, and nickel (Ni)-Ge Schottky contacts were made to the tops of the NWs. Current-voltage (I-V) characteristics were measured for variable ranges of NW diameters and numbers of nanowires in the arrays, and the I-V characteristics were fit using modified thermionic emission theory to extract the barrier height and ideality factor. As grown NWs did not show rectifying behavior due to the presence of heavy P side-wall doping during growth, resulting in a tunnel contact. After sidewall etching using a dilute peroxide solution, rectifying behavior was obtained. Schottky barrier heights of 0.3-0.4 V and ideality factors close to 2 were extracted using thermionic emission theory, although the model does not give an accurate fit across the whole bias range. Attempts to account for enhanced side-wall conduction due to non-uniform P doping profile during growth through a simple shunt resistance improve the fit, but are still insufficient to provide a good fit. Full three-dimensional numerical modeling using Silvaco Atlas indicates that at least part of this effect is due to the presence of fixed charge and acceptor like traps on the NW surface, which leads to effectively high ideality factors.

Transparency masters for mathematics revealed

CERN Document Server

Berman, Elizabeth

1980-01-01

Transparency Masters for Mathematics Revealed focuses on master diagrams that can be used for transparencies for an overhead projector or duplicator masters for worksheets. The book offers information on a compilation of master diagrams prepared by John R. Stafford, Jr., audiovisual supervisor at the University of Missouri at Kansas City. Some of the transparencies are designed to be shown horizontally. The initial three masters are number lines and grids that can be used in a mathematics course, while the others are adaptations of text figures which are slightly altered in some instances. The

Orographic precipitation and vertical velocity characteristics from drop size and fall velocity spectra observed by disdrometers

Science.gov (United States)

Lee, Dong-In; Kim, Dong-Kyun; Kim, Ji-Hyeon; Kang, Yunhee; Kim, Hyeonjoon

2017-04-01

During a summer monsoon season each year, severe weather phenomena caused by front, mesoscale convective systems, or typhoons often occur in the southern Korean Peninsula where is mostly comprised of complex high mountains. These areas play an important role in controlling formation, amount, and distribution of rainfall. As precipitation systems move over the mountains, they can develop rapidly and produce localized heavy rainfall. Thus observational analysis in the mountainous areas is required for studying terrain effects on the rapid rainfall development and its microphysics. We performed intensive field observations using two s-band operational weather radars around Mt. Jiri (1950 m ASL) during summertime on June and July in 2015-2016. Observation data of DSD (Drop Size Distribution) from Parsivel disdrometer and (w component) vertical velocity data from ultrasonic anemometers were analyzed for Typhoon Chanhom on 12 July 2015 and the heavy rain event on 1 July 2016. During the heavy rain event, a dual-Doppler radar analysis using Jindo radar and Gunsan radar was also conducted to examine 3-D wind fields and vertical structure of reflectivity in these areas. For examining up-/downdrafts in the windward or leeward side of Mt. Jiri, we developed a new scheme technique to estimate vertical velocities (w) from drop size and fall velocity spectra of Parsivel disdrometers at different stations. Their comparison with the w values observed by the 3D anemometer showed quite good agreement each other. The Z histogram with regard to the estimated w was similar to that with regard to R, indicating that Parsivel-estimated w is quite reasonable for classifying strong and weak rain, corresponding to updraft and downdraft, respectively. Mostly, positive w values (upward) were estimated in heavy rainfall at the windward side (D1 and D2). Negative w values (downward) were dominant even during large rainfall at the leeward side (D4). For D1 and D2, the upward w percentages were

Efficient Semitransparent Perovskite Solar Cells Using a Transparent Silver Electrode and Four-Terminal Perovskite/Silicon Tandem Device Exploration

Directory of Open Access Journals (Sweden)

Dazheng Chen

2018-01-01

Full Text Available Four-terminal tandem solar cells employing a perovskite top cell and crystalline silicon (Si bottom cell offer a simpler pathway to surpass the efficiency limit of market-leading single-junction silicon solar cells. To obtain cost-effective top cells, it is crucial to develop transparent conductive electrodes with low parasitic absorption and manufacturing cost. The commonly used indium tin oxide (ITO shows some drawbacks, like the increasing prices and high-energy magnetron sputtering process. Transparent metal electrodes are promising candidates owing to the simple evaporation process, facile process conditions, and high conductivity, and the cheaper silver (Ag electrode with lower parasitic absorption than gold may be the better choice. In this work, efficient semitransparent perovskite solar cells (PSCs were firstly developed by adopting the composite cathode of an ultrathin Ag electrode at its percolation threshold thickness (11 nm, a molybdenum oxide optical coupling layer, and a bathocuproine interfacial layer. The resulting power conversion efficiency (PCE is 13.38% when the PSC is illuminated from the ITO side and the PCE is 8.34% from the Ag side, and no obvious current hysteresis can be observed. Furthermore, by stacking an industrial Si bottom cell (PCE = 14.2% to build a four-terminal architecture, the overall PCEs of 17.03% (ITO side and 11.60% (Ag side can be obtained, which are 27% and 39% higher, respectively, than those of the perovskite top cell. Also, the PCE of the tandem cell has exceeded that of the reference Si solar cell by about 20%. This work provides an outlook to fabricate high-performance solar cells via the cost-effective pathway.

Bifacial dye-sensitized solar cells: A strategy to enhance overall efficiency based on transparent polyaniline electrode

OpenAIRE

Wu, Jihuai; Li, Yan; Tang, Qunwei; Yue, Gentian; Lin, Jianming; Huang, Miaoliang; Meng, Lijian

2014-01-01

Dye-sensitized solar cell (DSSC) is a promising solution to global energy and environmental problems because of its clean, low-cost, high efficiency, good durability, and easy fabrication. However, enhancing the efficiency of the DSSC still is an important issue. Here we devise a bifacial DSSC based on a transparent polyaniline (PANI) counter electrode (CE). Owing to the sunlight irradiation simultaneously from the front and the rear sides, more dye molecules are excited and more ...

Side scanner for supermarkets: a new scanner design standard

Science.gov (United States)

Cheng, Charles K.; Cheng, J. K.

1996-09-01

High speed UPC bar code has become a standard mode of data capture for supermarkets in the US, Europe, and Japan. The influence of the ergonomics community on the design of the scanner is evident. During the past decade the ergonomic issues of cashier in check-outs has led to occupational hand-wrist cumulative trauma disorders, in most cases causing carpal tunnel syndrome, a permanent hand injury. In this paper, the design of a side scanner to resolve the issues is discussed. The complex optical module and the sensor for aforesaid side scanner is described. The ergonomic advantages offer the old counter mounted vertical scanner has been experimentally proved by the industrial funded study at an independent university.

Electromagnetically induced transparency with matched pulses

International Nuclear Information System (INIS)

Harris, S.E.

1993-01-01

In the last several years there have been studies and experiments showing how, by applying an additional laser beam, optically-thick transitions may be rendered nearly transparent to probing radiation. This transparency results from a quantum interference, very much like a Fano interference, which is established by the additional laser. This talk describes the difference between the quantum interference as exhibited by an independent atom and by an optically-thick ensemble of atoms. We find that an ensemble of atoms establishes transparency through a strong nonlinear interaction which, for a lambda system, tends to generate a matching temporal envelope on the complementary transition. For a ladder system, phase conjugate pulses are generated and, after a characteristic distance, establish transparency. The transparency of an optically-thick medium is therefore not a Beer's law superposition of the independent atom response. To transmit a pulse through an otherwise opaque media, the front edge of the complementary pulse should lead, in the manner of open-quotes counter-intuitiveclose quotes adiabatic transfer, the front edge of the pulse which is to be rendered transparent. Thereafter the pulses should be matched or, for a ladder system, phase-conjugately matched

Transparent, broadband, flexible, and bifacial-operable photodetectors containing a large-area graphene-gold oxide heterojunction.

Science.gov (United States)

Liu, Yu-Lun; Yu, Chen-Chieh; Lin, Keng-Te; Yang, Tai-Chi; Wang, En-Yun; Chen, Hsuen-Li; Chen, Li-Chyong; Chen, Kuei-Hsien

2015-05-26

In this study, we combine graphene with gold oxide (AuOx), a transparent and high-work-function electrode material, to achieve a high-efficient, low-bias, large-area, flexible, transparent, broadband, and bifacial-operable photodetector. The photodetector operates through hot electrons being generated in the graphene and charge separation occurring at the AuOx-graphene heterojunction. The large-area graphene covering the AuOx electrode efficiently prevented reduction of its surface; it also acted as a square-centimeter-scale active area for light harvesting and photodetection. Our graphene/AuOx photodetector displays high responsivity under low-intensity light illumination, demonstrating picowatt sensitivity in the ultraviolet regime and nanowatt sensitivity in the infrared regime for optical telecommunication. In addition, this photodetector not only exhibited broadband (from UV to IR) high responsivity-3300 A W(-1) at 310 nm (UV), 58 A W(-1) at 500 nm (visible), and 9 A W(-1) at 1550 nm (IR)-but also required only a low applied bias (0.1 V). The hot-carrier-assisted photoresponse was excellent, especially in the short-wavelength regime. In addition, the graphene/AuOx photodetector exhibited great flexibility and stability. Moreover, such vertical heterojunction-based graphene/AuOx photodetectors should be compatible with other transparent optoelectronic devices, suggesting applications in flexible and wearable optoelectronic technologies.

Transparency

Science.gov (United States)

LaFee, Scott

2009-01-01

Citizens now expect access to information, particularly from public institutions like local school districts. They demand input and accountability. Cultural and technological changes, such as the Internet, make it possible for districts to comply. Yet transparency--the easily seen and understood actions of a school district and the thinking behind…

Low-voltage organic electronics based on a gate-tunable injection barrier in vertical graphene-organic semiconductor heterostructures.

Science.gov (United States)

Hlaing, Htay; Kim, Chang-Hyun; Carta, Fabio; Nam, Chang-Yong; Barton, Rob A; Petrone, Nicholas; Hone, James; Kymissis, Ioannis

2015-01-14

The vertical integration of graphene with inorganic semiconductors, oxide semiconductors, and newly emerging layered materials has recently been demonstrated as a promising route toward novel electronic and optoelectronic devices. Here, we report organic thin film transistors based on vertical heterojunctions of graphene and organic semiconductors. In these thin heterostructure devices, current modulation is accomplished by tuning of the injection barriers at the semiconductor/graphene interface with the application of a gate voltage. N-channel devices fabricated with a thin layer of C60 show a room temperature on/off ratio >10(4) and current density of up to 44 mAcm(-2). Because of the ultrashort channel intrinsic to the vertical structure, the device is fully operational at a driving voltage of 200 mV. A complementary p-channel device is also investigated, and a logic inverter based on two complementary transistors is demonstrated. The vertical integration of graphene with organic semiconductors via simple, scalable, and low-temperature fabrication processes opens up new opportunities to realize flexible, transparent organic electronic, and optoelectronic devices.

Playing the numbers game: Dealing with transparency

NARCIS (Netherlands)

Pachidi, S.; Huysman, M.H.; Berends, Hans; van de Weerd, G.C.

2015-01-01

Our research focus is on unpacking the performativity of transparency in order to explain how digital technologies, formerly perceived as enablers of surveillance and control, afford opaqueness as much as transparency. We develop a sociomaterial perspective on transparency and investigate how

High-performance ambipolar self-assembled Au/Ag nanowire based vertical quantum dot field effect transistor.

Science.gov (United States)

Song, Xiaoxian; Zhang, Yating; Zhang, Haiting; Yu, Yu; Cao, Mingxuan; Che, Yongli; Wang, Jianlong; Dai, Haitao; Yang, Junbo; Ding, Xin; Yao, Jianquan

2016-10-07

Most lateral PbSe quantum dot field effect transistors (QD FETs) show a low on current/off current (I on/I off) ratio in charge transport measurements. A new strategy to provide generally better performance is to design PbSe QD FETs with vertical architecture, in which the structure parameters can be tuned flexibly. Here, we fabricated a novel room-temperature operated vertical quantum dot field effect transistor with a channel of 580 nm, where self-assembled Au/Ag nanowires served as source transparent electrodes and PbSe quantum dots as active channels. Through investigating the electrical characterization, the ambipolar device exhibited excellent characteristics with a high I on/I off current ratio of about 1 × 10(5) and a low sub-threshold slope (0.26 V/decade) in the p-type regime. The all-solution processing vertical architecture provides a convenient way for low cost, large-area integration of the device.

Finite element analysis of heating a non-mixed liquid with non-uniform solar flux through semi-transparent medium

International Nuclear Information System (INIS)

Safdari, Y.B.; Sirivatch Shimpalee

2000-01-01

It has been shown in an application [1-3), in a solar flux heating of a liquid through a semi-transparent medium, that the far side of the medium receiving solar radiation achieves a higher temperature than the side receiving radiation. In this work, a two-dimensional transient finite element analysis of concentrated solo flux heating of a non-mixed liquid through a semi-transparent medium (such as glass) is carried out. The radiation heat flux is provided by a paraboloidal concentrator which focuses a non-uniform flux on the receiver. Realistic boundary conditions are considered to analyse the heat transfer problem to study the transient temperature distribution in the medium. The effects of a non-mixed liquid and a non-uniform flux show dramatic differences between the present work and the previous works [1-31. A non-mixed liquid causes greater temperature difference in the glass in both radial and axial direction than a mixed liquid used in the previous analysis. Therminol-55 is used as heated liquid for lower flux case, and sodium is used for high flux. The effect of the conductivity difference between the two liquids is studied. Results show that in the case of Therminol-55, the temperature of the liquid-side glass is much higher than that of the sodium case. The temperature distribution will be used to analyse the thermal stresses in the glass to see if fracture will occurs [4) in the glass. (Author)

A tool to determine crown and plot canopy transparency for forest inventory and analysis phase 3 plots using digital photographs

Science.gov (United States)

Matthew F. Winn; Philip A. Araman

2012-01-01

The USDA Forest Service Forest Inventory and Analysis (FIA) program collects crown foliage transparency estimates for individual trees on Phase 3 (P3) inventory plots. The FIA crown foliage estimate is obtained from a pair of perpendicular side views of the tree. Researchers with the USDA Forest Service Southern Research Station have developed a computer program that...

Impact of balancing-side tooth contact on clenching induced mandibular displacements in humans.

Science.gov (United States)

Baba, K; Yugami, K; Yaka, T; Ai, M

2001-08-01

This study investigated mandibular displacements during clenching in the lateral mandibular position in relation to lateral occlusal relationships. Twelve healthy human subjects (mean=26.7 years) volunteered for this study. Acrylic occlusal devices were fabricated for the lower working-side canine, working-side second molar and balancing-side second molar in order to simulate a dominant canine guidance, working-side interference (WI), balancing-side interference (BI) and bilateral balanced occlusion (BO). Vertical displacements of the mandible were recorded by linear variable differential transformers during submaximal clenching in the right lateral position. The four experimental occlusal conditions were revealed to have a significant effect on mandibular displacement patterns (ANOVA, P experimental conditions. These results suggest that the nature of reaction forces at the temporomandibular (TM) joints caused by the elevation of the mandible varies in a predictable manner depending upon lateral occlusal relationships.

Optical bistability in a single-sided cavity coupled to a quantum channel

Science.gov (United States)

Payravi, M.; Solookinejad, Gh; Jabbari, M.; Nafar, M.; Ahmadi Sangachin, E.

2018-06-01

In this paper, we discuss the long wavelength optical reflection and bistable behavior of an InGaN/GaN quantum dot nanostructure coupled to a single-sided cavity. It is found that due to the presence of a strong coupling field, the reflection coefficient can be controlled at long wavelength, which is essential for adjusting the threshold of reflected optical bistability. Moreover, the phase shift features of the reflection pulse inside an electromagnetically induced transparency window are also discussed.

Student Perceptions of Teaching Transparency

Science.gov (United States)

Anderson, Alecia D.; Hunt, Andrea N.; Powell, Rachel E.; Dollar, Cindy Brooks

2013-01-01

The authors discuss the relationship between teaching transparency and active learning through the perspectives of their students. Active learning directly engages students in the learning process while transparency involves the instructor's divulgence of logic regarding course organization and activity choices. After utilizing these teaching…

Transparency as an ethical safeguard

NARCIS (Netherlands)

Spagnolli, Anna; Frank, Lily E.; Haselager, Pim; Kirsh, David; Ham, Jaap; Spagnolli, Anna; Blankertz, Benjamin; Gamberini, Luciano; Jacucci, Giulio

2018-01-01

Transparency seems to represent a solution to many ethic issues generated by systems that collect implicit data from users to model the user themselves based on programmed criteria. However, making such systems transparent -- besides being a major technical challenge - risks raising more issues than

Flexible Transparent Supercapacitors Based on Hierarchical Nanocomposite Films.

Science.gov (United States)

Chen, Fanhong; Wan, Pengbo; Xu, Haijun; Sun, Xiaoming

2017-05-31

Flexible transparent electronic devices have recently gained immense popularity in smart wearable electronics and touch screen devices, which accelerates the development of the portable power sources with reliable flexibility, robust transparency and integration to couple these electronic devices. For potentially coupled as energy storage modules in various flexible, transparent and portable electronics, the flexible transparent supercapacitors are developed and assembled from hierarchical nanocomposite films of reduced graphene oxide (rGO) and aligned polyaniline (PANI) nanoarrays upon their synergistic advantages. The nanocomposite films are fabricated from in situ PANI nanoarrays preparation in a blended solution of aniline monomers and rGO onto the flexible, transparent, and stably conducting film (FTCF) substrate, which is obtained by coating silver nanowires (Ag NWs) layer with Meyer rod and then coating of rGO layer on polyethylene terephthalate (PET) substrate. Optimization of the transparency, the specific capacitance, and the flexibility resulted in the obtained all-solid state nanocomposite supercapacitors exhibiting enhanced capacitance performance, good cycling stability, excellent flexibility, and superior transparency. It provides promising application prospects for exploiting flexible, low-cost, transparent, and high-performance energy storage devices to be coupled into various flexible, transparent, and wearable electronic devices.

Transparent metals for ultrabroadband electromagnetic waves.

Science.gov (United States)

Fan, Ren-Hao; Peng, Ru-Wen; Huang, Xian-Rong; Li, Jia; Liu, Yongmin; Hu, Qing; Wang, Mu; Zhang, Xiang

2012-04-17

Making metals transparent, which could lead to fascinating applications, has long been pursued. Here we demonstrate that with narrow slit arrays metallic plates become transparent for extremely broad bandwidths; the high transmission efficiency is insensitive to the metal thickness. This work provides a guideline to develop novel devices, including transparent conducting panels, broadband metamaterials, and antireflective solar cells. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Clinical trials transparency and the Trial and Experimental Studies Transparency (TEST) act.

Science.gov (United States)

Logvinov, Ilana

2014-03-01

Clinical trial research is the cornerstone for successful advancement of medicine that provides hope for millions of people in the future. Full transparency in clinical trials may allow independent investigators to evaluate study designs, perform additional analysis of data, and potentially eliminate duplicate studies. Current regulatory system and publishers rely on investigators and pharmaceutical industries for complete and accurate reporting of results from completed clinical trials. Legislation seems to be the only way to enforce mandatory disclosure of results. The Trial and Experimental Studies Transparency (TEST) Act of 2012 was introduced to the legislators in the United States to promote greater transparency in research industry. Public safety and advancement of science are the driving forces for the proposed policy change. The TEST Act may benefit the society and researchers; however, there are major concerns with participants' privacy and intellectual property protection. Copyright © 2014 Elsevier Inc. All rights reserved.

Implementation of vertically asymmetric toroidal-field ripple for beam heating of tokamak reactor plasmas

International Nuclear Information System (INIS)

Jassby, D.L.; Sheffield, G.V.; Towner, H.H.; Weissenburger, D.W.

1976-10-01

The neutral-beam energy required for adequate penetration of tokamak plasmas of high opacity can be reduced by a large factor if the beam is injected vertically into a region of large TF (toroidal-field) ripple. Energetic ions are trapped in local magnetic wells and drift vertically toward the midplane (z = 0). If the ripple is made very small on the opposite side of the midplane, drifting ions are detrapped and thermalized in the central plasma region. This paper discusses design considerations for establishing the required vertically asymmetric ripple. Examples are given of special TF-coil configurations, and of the use of auxiliary coil windings to create the prescribed ripple profiles

Promoting transparency, accountability, and access through a multi-stakeholder initiative: lessons from the medicines transparency alliance.

Science.gov (United States)

Vian, Taryn; Kohler, Jillian C; Forte, Gilles; Dimancesco, Deirdre

2017-01-01

Barriers to expanding access to medicines include weak pharmaceutical sector governance, lack of transparency and accountability, inadequate attention to social services on the political agenda, and financing challenges. Multi-stakeholder initiatives such as the Medicines Transparency Alliance (MeTA) may help overcome these barriers. Between 2008 and 2015, MeTA engaged stakeholders in the pharmaceutical sectors of seven countries (Ghana, Jordan, Kyrgyzstan, Peru, Philippines, Uganda, and Zambia) to promote access goals through greater transparency. We reviewed archival data to document MeTA activities and results related to transparency and accountability in the seven countries where it was implemented. We identified common themes and content areas, noting specific activities used to make information transparent and accessible, how data were used to inform discussions, and the purpose and timing of meetings and advocacy activities to help set priorities and influence governance decisions. The cross-case analysis looked for pathways which might link the MeTA strategies to results such as better policies or program improvements. Countries used evidence gathering, open meetings, and proactive information dissemination to increase transparency. MeTA fostered policy dialogue to bring together the many government, civil society and private company stakeholders concerned with access issues, and provided them with information to understand barriers to access at policy, organizational, and community levels. We found strong evidence that transparency was enhanced. Some evidence suggests that MeTA efforts contributed to new policies and civil society capacity strengthening although the impact on government accountability is not clear. MeTA appears to have achieved its goal of creating a multi-stakeholder shared policy space in which government, civil society, and private sector players can come together and have a voice in the national pharmaceutical policy making process

Transparency and Oversight in Local Wellness Policies

Science.gov (United States)

Chriqui, Jamie F.; Chaloupka, Frank J.

2011-01-01

Background: Advocates have called for increased wellness policy transparency and oversight through the use of health advisory councils. This study examines (1) wellness policy transparency, (2) advisory council requirements, (3) factors associated with each, and (4) whether transparency or advisory council requirements are indicative of a stronger…

Towards Transparency in Finance and Governance

OpenAIRE

Tara Vishwanath; Daniel Kaufmann

2003-01-01

The study of transparency is increasingly a more topical, broadly relevant, but also more under-researched enterprise. The Asian financial crisis has highlighted not only the welfare consequences of financial sector transparency, sparking a series of yet unresolved debates, but has also linked this relatively narrow problem to the broader context of transparency in governance. Its significance has broadened geographically as well as across different sectors. It has been observed that curtailm...

Remote Monitoring Transparency Program

International Nuclear Information System (INIS)

Sukhoruchkin, V.K.; Shmelev, V.M.; Roumiantsev, A.N.

1996-01-01

The objective of the Remote Monitoring Transparency Program is to evaluate and demonstrate the use of remote monitoring technologies to advance nonproliferation and transparency efforts that are currently being developed by Russia and the United States without compromising the national security to the participating parties. Under a lab-to-lab transparency contract between Sandia National Laboratories (SNL) and the Kurchatov Institute (KI RRC), the Kurchatov Institute will analyze technical and procedural aspects of the application of remote monitoring as a transparency measure to monitor inventories of direct- use HEU and plutonium (e.g., material recovered from dismantled nuclear weapons). A goal of this program is to assist a broad range of political and technical experts in learning more about remote monitoring technologies that could be used to implement nonproliferation, arms control, and other security and confidence building measures. Specifically, this program will: (1) begin integrating Russian technologies into remote monitoring systems; (2) develop remote monitoring procedures that will assist in the application of remote monitoring techniques to monitor inventories of HEU and Pu from dismantled nuclear weapons; and (3) conduct a workshop to review remote monitoring fundamentals, demonstrate an integrated US/Russian remote monitoring system, and discuss the impacts that remote monitoring will have on the national security of participating countries

Electromagnetically induced transparency in an open multilevel system

International Nuclear Information System (INIS)

Li Tian; Lu Meiju; Weinstein, Jonathan D.

2011-01-01

Electromagnetically induced transparency in a multilevel system is investigated in 173 Yb. The level structure investigated is ''open'' in that the light that gives rise to the transparency also resonantly couples the atoms to excited states which do not exhibit electromagnetically induced transparency. The resulting reduction of transparency is investigated experimentally and theoretically. It is found that, while the transparency is poor in certain regimes, it can be made to perform arbitrarily well in the limit of a large intensity imbalance between the optical fields.

Vertically Integrated Edgeless Photon Imaging Camera

Energy Technology Data Exchange (ETDEWEB)

Fahim, Farah [Fermilab; Deptuch, Grzegorz [Fermilab; Shenai, Alpana [Fermilab; Maj, Piotr [AGH-UST, Cracow; Kmon, Piotr [AGH-UST, Cracow; Grybos, Pawel [AGH-UST, Cracow; Szczygiel, Robert [AGH-UST, Cracow; Siddons, D. Peter [Brookhaven; Rumaiz, Abdul [Brookhaven; Kuczewski, Anthony [Brookhaven; Mead, Joseph [Brookhaven; Bradford, Rebecca [Argonne; Weizeorick, John [Argonne

2017-01-01

The Vertically Integrated Photon Imaging Chip - Large, (VIPIC-L), is a large area, small pixel (65μm), 3D integrated, photon counting ASIC with zero-suppressed or full frame dead-time-less data readout. It features data throughput of 14.4 Gbps per chip with a full frame readout speed of 56kframes/s in the imaging mode. VIPIC-L contain 192 x 192 pixel array and the total size of the chip is 1.248cm x 1.248cm with only a 5μm periphery. It contains about 120M transistors. A 1.3M pixel camera module will be developed by arranging a 6 x 6 array of 3D VIPIC-L’s bonded to a large area silicon sensor on the analog side and to a readout board on the digital side. The readout board hosts a bank of FPGA’s, one per VIPIC-L to allow processing of up to 0.7 Tbps of raw data produced by the camera.

Nuclear deterrence: which environmental transparency?

International Nuclear Information System (INIS)

Cherief, Hamza

2012-01-01

This article addresses the field of nuclear geopolitics. The author discusses the tensions between the principle of transparency regarding environmental issues on the one hand, and the protection of nuclear deterrence as instrument of power on the other hand. According to the French law, the preservation of nuclear power instruments means the acknowledgement of a legal regime which is specific to national defence requirements in terms of secret and right to information. Thus, the author discusses the constitutional limitations of the environmental transparency obligation for the protection of Nation's fundamental interests. Then, by commenting the Rainbow Warrior affair, the author highlights the exceptional limitations of the transparency requirement regarding nuclear issues

Nanocellulose reinforcement of Transparent Composites

Science.gov (United States)

Joshua Steele; Hong Dong; James F. Snyder; Josh A. Orlicki; Richard S. Reiner; Alan W. Rudie

2012-01-01

In this work, we evaluate the impact of nanocellulose reinforcement on transparent composite properties. Due to the small diameter, high modulus, and high strength of cellulose nanocrystals, transparent composites that utilize these materials should show improvement in bulk mechanical performances without a corresponding reduction in optical properties. In this study...

Determinations of vertical stroke V{sub cb} vertical stroke and vertical stroke V{sub ub} vertical stroke from baryonic Λ{sub b} decays

Energy Technology Data Exchange (ETDEWEB)

Hsiao, Y.K. [Shanxi Normal University, School of Physics and Information Engineering, Linfen (China); National Tsing Hua University, Department of Physics, Hsinchu (China); Geng, C.Q. [Shanxi Normal University, School of Physics and Information Engineering, Linfen (China); National Tsing Hua University, Department of Physics, Hsinchu (China); Hunan Normal University, Synergetic Innovation Center for Quantum Effects and Applications (SICQEA), Changsha (China)

2017-10-15

We present the first attempt to extract vertical stroke V{sub cb} vertical stroke from the Λ{sub b} → Λ{sub c}{sup +}l anti ν{sub l} decay without relying on vertical stroke V{sub ub} vertical stroke inputs from the B meson decays. Meanwhile, the hadronic Λ{sub b} → Λ{sub c}M{sub (c)} decays with M = (π{sup -},K{sup -}) and M{sub c} =(D{sup -},D{sup -}{sub s}) measured with high precisions are involved in the extraction. Explicitly, we find that vertical stroke V{sub cb} vertical stroke =(44.6 ± 3.2) x 10{sup -3}, agreeing with the value of (42.11 ± 0.74) x 10{sup -3} from the inclusive B → X{sub c}l anti ν{sub l} decays. Furthermore, based on the most recent ratio of vertical stroke V{sub ub} vertical stroke / vertical stroke V{sub cb} vertical stroke from the exclusive modes, we obtain vertical stroke V{sub ub} vertical stroke = (4.3 ± 0.4) x 10{sup -3}, which is close to the value of (4.49 ± 0.24) x 10{sup -3} from the inclusive B → X{sub u}l anti ν{sub l} decays. We conclude that our determinations of vertical stroke V{sub cb} vertical stroke and vertical stroke V{sub ub} vertical stroke favor the corresponding inclusive extractions in the B decays. (orig.)

Transparent ambipolar organic thin film transistors based on multilayer transparent source-drain electrodes

Energy Technology Data Exchange (ETDEWEB)

Zhang, Nan; Hu, Yongsheng, E-mail: huyongsheng@ciomp.ac.cn, E-mail: liuxy@ciomp.ac.cn; Lin, Jie; Li, Yantao; Liu, Xingyuan, E-mail: huyongsheng@ciomp.ac.cn, E-mail: liuxy@ciomp.ac.cn [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033 (China)

2016-08-08

A fabrication method for transparent ambipolar organic thin film transistors with transparent Sb{sub 2}O{sub 3}/Ag/Sb{sub 2}O{sub 3} (SAS) source and drain electrodes has been developed. A pentacene/N,N′-ditridecylperylene-3,4,9,10-tetracarboxylic di-imide (PTCDI-C13) bilayer heterojunction is used as the active semiconductor. The electrodes are deposited by room temperature electron beam evaporation. The devices are fabricated without damaging the active layers. The SAS electrodes have high transmittance (82.5%) and low sheet resistance (8 Ω/sq). High performance devices with hole and electron mobilities of 0.3 cm{sup 2}/V s and 0.027 cm{sup 2}/V s, respectively, and average visible range transmittance of 72% were obtained. These transistors have potential for transparent logic integrated circuit applications.

Hydrodynamics of magnetizable suspensions in a traveling magnetic field of a single-sided inductor

International Nuclear Information System (INIS)

Maiorov, M.M.; Tsebers, A.O.

1979-01-01

A few qualitative tests are described which validate the basic concepts about the behavior of magnetic fluids in a traveling field of a single-sided inductor. In the experiment small droplets of a magnetic fluid were deposited on both sides of a transparent plate. With the traveling field turned on, one could observe the motion of these droplets in opposite directions: the droplets on the inductor side of the plate moving in the direction of the traveling field. This pattern of motion can be explained by the action of antisymmetric stresses due to rotation of ferromagnetic particles, in the traveling field, on the surface of a droplet. On the basis of present results, it is concluded that accounting for the antisymmetric stresses in the selection of an adequate model of magnetic relaxation makes it possible to correctly describe the motion of a magnetic fluid in a traveling field of a single-sided inductor. An adequate model for describing the motion of a colloidal suspension of cobalt ferrite is magnetic relaxation of rigid dipoles. 10 refs

The Multi-Faceted Concept of Transparency

OpenAIRE

Forssbæck, Jens; Oxelheim, Lars

2014-01-01

Transparency has become a catchword and in the economic-political debate is often seen as a universal remedy for all sorts of problems. In this paper, we analyze and discuss the meaning and use of the concept of transparency in economic research. We look for common denominators across different areas where the concept is used, and find that transparency in essence is about reductions in information asymmetries, and therefore entails the transfer of information from a sender to a receiver. Tra...

Examination of Relationship between Nuclear Transparency and Nonproliferation

Energy Technology Data Exchange (ETDEWEB)

Ha, Jee-Min; Yim, Man-Sung; Park, Hyeon Seok; Kim, So Young [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2015-05-15

In this study, we define the state-level nuclear transparency as a set of the condition that shows how clearly the state's information related to peaceful nuclear power program and nuclear proliferation is revealed to the international community. For conducting expert survey on state-level nuclear transparency, the concept of nuclear transparency should be clearly defined. Based on that concept, the survey was carried out and results show that it tend to score high when nonproliferation activities happen. It means that higher transparency is positively related to nuclear proliferation. Therefore, higher nuclear transparency is positively related to nuclear nonproliferation.

Examination of Relationship between Nuclear Transparency and Nonproliferation

International Nuclear Information System (INIS)

Ha, Jee-Min; Yim, Man-Sung; Park, Hyeon Seok; Kim, So Young

2015-01-01

In this study, we define the state-level nuclear transparency as a set of the condition that shows how clearly the state's information related to peaceful nuclear power program and nuclear proliferation is revealed to the international community. For conducting expert survey on state-level nuclear transparency, the concept of nuclear transparency should be clearly defined. Based on that concept, the survey was carried out and results show that it tend to score high when nonproliferation activities happen. It means that higher transparency is positively related to nuclear proliferation. Therefore, higher nuclear transparency is positively related to nuclear nonproliferation

Issues in Canadian board transparency

Directory of Open Access Journals (Sweden)

Chris Bart

2007-01-01

Full Text Available Transparency is considered one of the principles of good corporate governance. But what does it mean – in practice – especially when it comes to Board transparency – i.e. the ability of shareholders to gain knowledge about an organization’s corporate governance practices in order to make an informed assessment of Directors’ individual and collective roles and performance. In a preliminary investigation of Board transparency practices in Canadian listed firms (using data from 2003-2004, it was found that there were wide variations in the nature and quantity of corporate governance practices disclosed. The reasons for these variations are discussed and a number of recommendations for improved disclosure are presented.

CFD Validation of Gas Injection in Flowing Mercury over Vertical Smooth and Grooved Wall

International Nuclear Information System (INIS)

Abdou, Ashraf A.; Wendel, Mark W.; Felde, David K.; Riemer, Bernie

2009-01-01

The Spallation Neutron Source (SNS) is an accelerator-based neutron source at Oak Ridge National Laboratory (ORNL). The nuclear spallation reaction occurs when a proton beam hits liquid mercury. This interaction causes thermal expansion of the liquid mercury which produces high pressure waves. When these pressure waves hit the target vessel wall, cavitation can occur and erode the wall. Research and development efforts at SNS include creation of a vertical protective gas layer between the flowing liquid mercury and target vessel wall to mitigate the cavitation damage erosion and extend the life time of the target. Since mercury is opaque, computational fluid dynamics (CFD) can be used as a diagnostic tool to see inside the liquid mercury and guide the experimental efforts. In this study, CFD simulations of three dimensional, unsteady, turbulent, two-phase flow of helium gas injection in flowing liquid mercury over smooth, vertically grooved and horizontally grooved walls are carried out with the commercially available CFD code Fluent-12 from ANSYS. The Volume of Fluid (VOF) model is used to track the helium-mercury interface. V-shaped vertical and horizontal grooves with 0.5 mm pitch and about 0.7 mm depth were machined in the transparent wall of acrylic test sections. Flow visualization data of helium gas coverage through transparent test sections is obtained with a high-speed camera at the ORNL target test facility (TTF). The helium gas mass flow rate is 8 mg/min and introduced through a 0.5 mm diameter port. The local mercury velocity is 0.9 m/s. In this paper, the helium gas flow rate and the local mercury velocity are kept constant for the three cases. Time integration of predicted helium gas volume fraction over time is done to evaluate the gas coverage and calculate the average thickness of the helium gas layer. The predicted time-integrated gas coverage over vertically grooved and horizontally grooved test sections is better than over a smooth wall. The

Transparent Data Encryption -- Solution for Security of Database Contents

OpenAIRE

Deshmukh, Dr. Anwar Pasha; Qureshi, Dr. Riyazuddin

2013-01-01

The present study deals with Transparent Data Encryption which is a technology used to solve the problems of security of data. Transparent Data Encryption means encrypting databases on hard disk and on any backup media. Present day global business environment presents numerous security threats and compliance challenges. To protect against data thefts and frauds we require security solutions that are transparent by design. Transparent Data Encryption provides transparent, standards-based secur...

Transparency in Nuclear Regulation: Trends and Future Prospects

International Nuclear Information System (INIS)

Choi, Kwang Sik; Choi, Young Sung; Kim, Seong Ho

2007-01-01

Recently, improving transparency (or openness) has been one of important issues related to nuclear safety worldwide. As for the transparency in nuclear regulatory activities in Korea, openness has been declared as one of five principles of the nuclear regulation in the 'nuclear safety policy statement' announced in 1994. Transparency has been discussed and emphasized in various international meetings such as the Convention on Nuclear Safety, OECD/NEA meetings, etc. For example, Working Group on Public Communication of nuclear regulatory organizations (WGPC) of the OECD/NEA/CNRA held a workshop on 'the transparency of nuclear regulatory activities' in May 2007 in Tokyo, Japan. In this paper, definition of transparency and its international trends ranging from a general administration to nuclear safety activities are discussed based on the results of meetings and workshops held so far. Measures for improvement associated with transparency are also proposed

Transparency in the Council of the European Union

DEFF Research Database (Denmark)

Laursen, Bo

2013-01-01

with information and thereby act as day-to-day facilitators of transparency of the Council’s activities. Although these communicators see themselves as contributing substantially to the transparency of the Council’s work and thereby as enabling the media to provide EU citizens with information about one......The Council of the European Union is often described as the least transparent of the three big EU institutions although steps have been taken to improve the transparency of its activities during the last couple of decades. This article focuses on the Council’s press officers who provide journalists...... of the most powerful political forums in Europe, transparency in the Council has its limits. This study explores institutional factors which hinder Council press officers from being as transparent as journalists would like them to be. In-depth, semi-structured interviews with Council press officers...

Transparency International

NARCIS (Netherlands)

Hulten, van M. (Michel)

2009-01-01

Established in 1993, Transparency International (TI) defines itself as “the global civil society organization leading the fight against corruption, that brings people together in a powerful worldwide coalition to end the devastating impact of corruption on men, women and children around the

Transparency in Europe: A Quantitative Study.

Science.gov (United States)

Bouder, Frederic; Way, Dominic; Löfstedt, Ragnar; Evensen, Darrick

2015-07-01

In recent years, European pharmaceutical regulators have increasingly committed to heightening access to raw safety-related data as part of a wave of transparency initiatives (e.g., providing public Internet-mediated access to clinical trials data). Yet, the regulators--who are under significant pressure--have not yet benefited from a systematic review of this new policy. In seeking to inject much needed evidence, this article explores the effects of new transparency policies designed to promote meaningful communication of risks and benefits to patients. Results of a cross-national European survey with respondents from Great Britain, the Netherlands, Spain, France, Germany, and Sweden (N = 5,648) shed light on how patients and the public are likely to react to the regulators' new transparency policies. The findings demonstrate clear national variations in how European citizens are likely to react and emphasize the need to develop evidence-based, reasoned transparency policies that integrate benefit-risk communication. The authors conclude by providing six specific recommendations, informed by the study, that seek to improve the European transparency model both within the medical field and across health, safety, and environmental policy domains. © 2015 Society for Risk Analysis.

PUBLIC SECTOR TRANSPARENCY:A CONCEPTUAL DISSECTION

Directory of Open Access Journals (Sweden)

Mara Andreea SÎNTEJUDEANU

2014-06-01

Full Text Available The concept of transparency has increasingly attracted the attention of academic, political and business areas. Many studies have demonstrated the need for adopting this corporate governance principle also in the public sector, a phenomenon that has become widespread at international level. The academic study field defines transparency as the ability to look clearly through the window of an institution. Starting from this statement, the research focuses on the importance of transparency in public governance and on the framework for identifying and assessing this concept. Furthermore, this paper also analysis the limits of this notion in order to maintain its significance and effectiveness. Thus, based on the literature review, this study summarizes the opinions and arguments of various authors in the field regarding the notion of transparency in the public sector. At the same time, it analysis the conclusions of empirical studies on this topic. The results of the study reveal the importance and necessity of information disclosure among different users for increasing citizens' trust in government and achieving good governance. However, the positive aspects of transparency tend to be overestimated and considering the ambiguity of this concept it should be carefully handled.

Transparent soil for imaging the rhizosphere.

Directory of Open Access Journals (Sweden)

Helen Downie

Full Text Available Understanding of soil processes is essential for addressing the global issues of food security, disease transmission and climate change. However, techniques for observing soil biology are lacking. We present a heterogeneous, porous, transparent substrate for in situ 3D imaging of living plants and root-associated microorganisms using particles of the transparent polymer, Nafion, and a solution with matching optical properties. Minerals and fluorescent dyes were adsorbed onto the Nafion particles for nutrient supply and imaging of pore size and geometry. Plant growth in transparent soil was similar to that in soil. We imaged colonization of lettuce roots by the human bacterial pathogen Escherichia coli O157:H7 showing micro-colony development. Micro-colonies may contribute to bacterial survival in soil. Transparent soil has applications in root biology, crop genetics and soil microbiology.

International trade and the role of market transparency

OpenAIRE

Broll, Udo; Eckwert, Bernhard; Wong, Kit Pong

2010-01-01

The paper examines the economic role of market transparency on the decision problems of an international firm. Transparency is described in terms of the informativeness of a publicly observable signal. With higher transparency, the signal conveys more precise information about the random foreign exchange rate. We analyze the interaction between market transparency, ex ante expected production, domestic sales, and exports of the firm. Furthermore, we discuss the welfare implications of more tr...

Large-Area Chemical Vapor Deposited MoS2 with Transparent Conducting Oxide Contacts toward Fully Transparent 2D Electronics

KAUST Repository

Dai, Zhenyu

2017-09-08

2D semiconductors are poised to revolutionize the future of electronics and photonics, much like transparent oxide conductors and semiconductors have revolutionized the display industry. Herein, these two types of materials are combined to realize fully transparent 2D electronic devices and circuits. Specifically, a large-area chemical vapor deposition process is developed to grow monolayer MoS2 continuous films, which are, for the first time, combined with transparent conducting oxide (TCO) contacts. Transparent conducting aluminum doped zinc oxide contacts are deposited by atomic layer deposition, with composition tuning to achieve optimal conductivity and band-offsets with MoS2. The optimized process gives fully transparent TCO/MoS2 2D electronics with average visible-range transmittance of 85%. The transistors show high mobility (4.2 cm2 V−1 s−1), fast switching speed (0.114 V dec−1), very low threshold voltage (0.69 V), and large switching ratio (4 × 108). To our knowledge, these are the lowest threshold voltage and subthreshold swing values reported for monolayer chemical vapor deposition MoS2 transistors. The transparent inverters show fast switching properties with a gain of 155 at a supply voltage of 10 V. The results demonstrate that transparent conducting oxides can be used as contact materials for 2D semiconductors, which opens new possibilities in 2D electronic and photonic applications.

Methods and apparatus for transparent display using scattering nanoparticles

Science.gov (United States)

Hsu, Chia Wei; Qiu, Wenjun; Zhen, Bo; Shapira, Ofer; Soljacic, Marin

2016-05-10

Transparent displays enable many useful applications, including heads-up displays for cars and aircraft as well as displays on eyeglasses and glass windows. Unfortunately, transparent displays made of organic light-emitting diodes are typically expensive and opaque. Heads-up displays often require fixed light sources and have limited viewing angles. And transparent displays that use frequency conversion are typically energy inefficient. Conversely, the present transparent displays operate by scattering visible light from resonant nanoparticles with narrowband scattering cross sections and small absorption cross sections. More specifically, projecting an image onto a transparent screen doped with nanoparticles that selectively scatter light at the image wavelength(s) yields an image on the screen visible to an observer. Because the nanoparticles scatter light at only certain wavelengths, the screen is practically transparent under ambient light. Exemplary transparent scattering displays can be simple, inexpensive, scalable to large sizes, viewable over wide angular ranges, energy efficient, and transparent simultaneously.

Fiscal Transparency and Procyclical Fiscal Policy

DEFF Research Database (Denmark)

Andersen, Asger Lau; Nielsen, Lasse Holbøll Westh

This paper examines why fiscal policy is procyclical in developing as well as developed countries. We introduce the concept of fiscal transparency into a model of retrospective voting, in which a political agency problem between voters and politicians generates a procyclical bias in government...... spending. The introduction of fiscal transparency generates two new predictions: 1) the procyclical bias in fiscal policy arises only in good times; and 2) a higher degree of fiscal transparency reduces the bias in good times. We find solid empirical support for both predictions using data on both OECD...

High efficiency double sided solar cells

International Nuclear Information System (INIS)

Seddik, M.M.

1990-06-01

Silicon technology state of the art for single crystalline was given to be limited to less than 20% efficiency. A proposed new form of photovoltaic solar cell of high current high efficiency with double sided structures has been given. The new forms could be n ++ pn ++ or p ++ np ++ double side junctions. The idea of double sided devices could be understood as two solar cells connected back-to-back in parallel electrical connection, in which the current is doubled if the cell is illuminated from both sides by a V-shaped reflector. The cell is mounted to the reflector such that each face is inclined at an angle of 45 deg. C to each side of the reflector. The advantages of the new structure are: a) High power devices. b) Easy to fabricate. c) The cells are used vertically instead of horizontal use of regular solar cell which require large area to install. This is very important in power stations and especially for satellite installation. If the proposal is made real and proved to be experimentally feasible, it would be a new era for photovoltaic solar cells since the proposal has already been extended to even higher currents. The suggested structures could be stated as: n ++ pn ++ Vp ++ np ++ ;n ++ pn ++ Vn ++ pn ++ ORp ++ np ++ Vp ++ np ++ . These types of structures are formed in wedged shape to employ indirect illumination by either parabolic; conic or V-shaped reflectors. The advantages of these new forms are low cost; high power; less in size and space; self concentrating; ... etc. These proposals if it happens to find their ways to be achieved experimentally, I think they will offer a short path to commercial market and would have an incredible impact on solar cell technology and applications. (author). 12 refs, 5 figs

Fairness through Transparency: The Influence of Price Transparency on Consumer Perceptions of Price Fairness

OpenAIRE

Sandra Rothenberger

2015-01-01

This study proposes that price transparency is a significant factor affecting customer judgments of the fairness of sellers’ prices. Cognitive judgments of fairness require a certain amount of information processing; therefore, the level of transparency and the amount of price information affect fairness judgments. The more clear information consumers possess concerning seller prices, the more positive the judgment will be. Customer price fairness judgment is an effective measurement for the ...

Voluntarism and transparent deliberation

DEFF Research Database (Denmark)

Steglich-Petersen, Asbjørn

2006-01-01

It is widely assumed that doxastic deliberation is transparent to the factual question of the truth of the proposition being considered for belief, and that this sets doxastic deliberation apart from practical deliberation. This feature is frequently invoked in arguments against doxastic voluntar......It is widely assumed that doxastic deliberation is transparent to the factual question of the truth of the proposition being considered for belief, and that this sets doxastic deliberation apart from practical deliberation. This feature is frequently invoked in arguments against doxastic...

Multidirectional Networks of Government Transparency: A Preliminary Model

Directory of Open Access Journals (Sweden)

Ahmad Subhan

2016-11-01

Full Text Available This article reviews some literature in theoretical level regarding two concepts: governance network and government transparency, in order to search for theoretical linkages and to build an alternative framework that can support the implementation of public disclosure. Transparency agenda has been implemented in various forms at international, national, and local level. Transparency application was also followed by Indonesia with the implementation of Public Information Disclosure Law since 2008. This enthusiasm is quite reasonable because transparency is believed to be one of the human rights principles; as well as a key to better governance, that can help democracy consolidation, prevent corruption, strengthen the legitimacy and improve efficiency. In order to maximize transparency, the government can use a network approach because of some changes at this time, such as democratization, decentralization, and liberalization has placed the government in a position where there is not one actor who manages the state power without stakeholder’s participation. In this context, the government needs to build synergies with other institutions in a reciprocal relationship with all stakeholders. Therefore, adopting the theory of government networks can be one of the strategies to strengthen government transparency. The findings of this article indicate that the government transparency application needs to develop networks in all directions: intragovernmental, intergovernmental and collaborative networks. These three types of network in contrast with the popular belief that government transparency is interpreted only as a procedural activity to outside parties. A preliminary model in this article gives an overview about the arena of government transparency with multi-directional networks more comprehensively.

Study of the transparent electrode photo-galvano-voltaic cell

Energy Technology Data Exchange (ETDEWEB)

Zhi-chu, B.

1980-01-01

A simple photo-galvano-voltaic cell has been constructed by using a Nesa glass coated with SnO/sub 2/ on both sides as transparent electrodes, one of which is further coated with a photosensitizing dyestuff, meso-tetraphenylporphrin (TPP), forming the photo-cathode, and using an aqueous solution of thionine and Fe/sup + + +//Fe/sup + +/ redox couple as the electrolytic solution. By adding a surfactant, Na Lauryl sulfate, into the solution the surface resistance of the TPP film is greatly lowered, so that the photocurrent of the cell is markedly enhanced and the light conversion efficiency is increased more than twofold. It has been demonstrated that a multilayer liquid film photo-galvano-voltaic cell with film thickness less than 100 ..mu.. can greatly increase the light conversion efficiency, and the open-circuit voltage of more than two volts can be easily achieved.

Electromagnetically-induced transparency in Doppler-broadened ...

Indian Academy of Sciences (India)

2014-02-08

Feb 8, 2014 ... triple EIT windows depending on the amplitude and detuning of the coupling fields. Keywords. Electromagnetically-induced transparency; atomic ... photon transparency [6] and the effect of spontaneously generated coherence on EIT [7] using homogenously broadened models. Pramana – J. Phys., Vol.

Organizational Transparency in the Internet Industry

DEFF Research Database (Denmark)

Flyverbom, Mikkel

as a panacea to concerns about privacy, organizational conduct and accountability, this paper explores the boundary work that goes into doing and promising transparency Using insights from the literature on transparency, ´sociologies of translations' and process approaches to organization, this paper captures...

Transparent Gap Filler Solution over a DVB-RCS2 Satellite Platform in a Railway Scenario: Performance Evaluation Study

Directory of Open Access Journals (Sweden)

Peppino Fazio

2015-01-01

Full Text Available In this work, a performance study of a system equipped with a transparent Gap Filler solution in a DVB-RCS2 satellite platform has been provided. In particular, a simulation model based on a 3-state Markov chain, overcoming the blockage status through the introduction of a transparent Gap Filler (using devices on both tunnel sides has been implemented. The handover time, due to switching mechanism between satellite and Gap Filler, has been taken into account. As reference scenario, the railway market has been considered, which is characterized by a N-LOS condition, due to service disruptions caused by tunnels, vegetation and buildings. The system performance, in terms of end-to-end delay, queue size and packet loss percentage, have been evaluated, in order to prove the goodness of communications in a real railroad path.

Transparent ceramic lamp envelope materials

Energy Technology Data Exchange (ETDEWEB)

Wei, G C [OSRAM SYLVANIA, 71 Cherry Hill Drive, Beverly, MA 01915 (United States)

2005-09-07

Transparent ceramic materials with optical qualities comparable to single crystals of similar compositions have been developed in recent years, as a result of the improved understanding of powder-processing-fabrication- sintering-property inter-relationships. These high-temperature materials with a range of thermal and mechanical properties are candidate envelopes for focused-beam, short-arc lamps containing various fills operating at temperatures higher than quartz. This paper reviews the composition, structure and properties of transparent ceramic lamp envelope materials including sapphire, small-grained polycrystalline alumina, aluminium oxynitride, yttrium aluminate garnet, magnesium aluminate spinel and yttria-lanthana. A satisfactory thermal shock resistance is required for the ceramic tube to withstand the rapid heating and cooling cycles encountered in lamps. Thermophysical properties, along with the geometry, size and thickness of a transparent ceramic tube, are important parameters in the assessment of its resistance to fracture arising from thermal stresses in lamps during service. The corrosive nature of lamp-fill liquid and vapour at high temperatures requires that all lamp components be carefully chosen to meet the target life. The wide range of new transparent ceramics represents flexibility in pushing the limit of envelope materials for improved beamer lamps.

Organizational Transparency & Sense Making: The case of Northern Rock

DEFF Research Database (Denmark)

Albu, Oana Brindusa; Wehmeier, Stefan

2014-01-01

Organizational transparency is associated with mutual understanding and consensus between the organization and its constituents, but is typically defined as information disclosure. Such definitions pose the risk of simplification and provide incomplete understandings of the transparency phenomenon....... Additionally, research rarely focuses on how transparency is translated within crisis situations. This article presents a sense-making and discourse analysis perspective of transparency. We use the case of the British bank Northern Rock to show how this bank and its stakeholders enacted transparency...

Transparency in Economic and Political Decision-Making: The Identification of Sunshine Rules for Transparent Lobbying

Directory of Open Access Journals (Sweden)

Laboutková Šárka

2017-09-01

Full Text Available Lobbying transparency seems to have been a challenging topic for nearly a decade. For the purposes of the article, the authors focus on a contextual analysis of rules and measures that offers both a broad as well as comprehensive view of the required transparency of lobbying activities and the environment in which decisions are made. In this regard, focusing on the sunshine principles/sunshine rules (not purely limited to laws provides a grasp of the whole issue in a broader context. From a methodological point of view, the exploratory approach was chosen and the coding procedure is mostly dichotomous. As a result, seven key areas with 70 indicators have been identified in terms of transparency of lobbying and decision-making.

Liquidity and Transparency in Bank Risk Management

OpenAIRE

Lev Ratnovski

2013-01-01

Banks may be unable to refinance short-term liabilities in case of solvency concerns. To manage this risk, banks can accumulate a buffer of liquid assets, or strengthen transparency to communicate solvency. While a liquidity buffer provides complete insurance against small shocks, transparency covers also large shocks but imperfectly. Due to leverage, an unregulated bank may choose insufficient liquidity buffers and transparency. The regulatory response is constained: while liquidity buffers ...

Color transparency

International Nuclear Information System (INIS)

Jennings, B.K.; Miller, G.A.

1993-01-01

The anomously large transmission of nucleons through a nucleus following a hard collision is explored. This effect, known as color transparency, is believed to be a prediction of QCD. The necessary conditions for its occurrence and the effects that must be included a realistic calculation are discussed

On transparent potentials: a Born approximation study

International Nuclear Information System (INIS)

Coudray, C.

1980-01-01

In the frame of the scattering inverse problem at fixed energy, a class of potentials transparent in Born approximation is obtained. All these potentials are spherically symmetric and are oscillating functions of the reduced radial variable. Amongst them, the Born approximation of the transparent potential of the Newton-Sabatier method is found. In the same class, quasi-transparent potentials are exhibited. Very general features of potentials transparent in Born approximation are then stated. And bounds are given for the exact scattering amplitudes corresponding to most of the potentials previously exhibited. These bounds, obtained at fixed energy, and for large values of the angular momentum, are found to be independent on the energy

Transparent data mining for big and small data

CERN Document Server

Quercia, Daniele; Pasquale, Frank

2017-01-01

This book focuses on new and emerging data mining solutions that offer a greater level of transparency than existing solutions. Transparent data mining solutions with desirable properties (e.g. effective, fully automatic, scalable) are covered in the book. Experimental findings of transparent solutions are tailored to different domain experts, and experimental metrics for evaluating algorithmic transparency are presented. The book also discusses societal effects of black box vs. transparent approaches to data mining, as well as real-world use cases for these approaches. As algorithms increasingly support different aspects of modern life, a greater level of transparency is sorely needed, not least because discrimination and biases have to be avoided. With contributions from domain experts, this book provides an overview of an emerging area of data mining that has profound societal consequences, and provides the technical background to for readers to contribute to the field or to put existing approaches to prac...

18 CFR 358.7 - Transparency rule.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Transparency rule. 358.7 Section 358.7 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... Transparency rule. (a) Contemporaneous disclosure. (1) If a transmission provider discloses non-public...

Economy and Transparency: The Model Invention

Directory of Open Access Journals (Sweden)

Mahmud Hassan TALUKDAR

2013-12-01

Full Text Available Relation of Transparency and Economic growth is a long global debate in the society. Theoretically, policy makers, scholars and researchers argue that there is a close relation among these two variables. However, the quantitative relation and any global model is yet unrevealed. So, the main aim of this paper is to ascertain the nature, dimension and extent of the relationship between economy and Transparency as well as to invent a global model. This paper is useful for researchers, planners, policy makers and scholars who are directly or indirectly involved or willing to involve in the thrust for quantitative relation of these two variables. Literature review is the main source of information of this study. In introductory section, this paper briefly describes theoretical relationship of economy and Transparency as well as it also describes the proxy variables.GDP (2012 of different countries are used as proxy of Economy and Corruption Perception Index (CPI scores (2012 of different countries are used as proxy of level of Transparency. In methodology section this paper describes the detail methodology, sampling procedure and level of analysis. This study randomly selects 30 countries (10 from higher CPI scores+10 from moderate CPI scores+ 10 from lower CPI scores around the globe as sample. In the third section, this research presents the correlation value which divulge that there is a positive correlation (p=.047 with 95% confidence level. That reveals, if the level of transparency of any country increase, the GDP also increase accordingly. Then in this section two quantitative models are developed using linear regression analysis. First invented model is: Economy (GDP in billion US$ = [(8.983*Level of transparency -108.11]. This paper termed the first invented model as “Mahmud EcoT Model-1”. This model calibrates that one unit improvement of transparency leads 8.98 billion US$ improvement in the GDP of a country. Then taking this unit

Legal framework to ensure transparency

International Nuclear Information System (INIS)

Treier, A.

2007-01-01

There is a national and an international trend towards administrative transparency. This trend has not stopped at. the Swiss border. Some cantons of Switzerland have already introduced the transparency principle at the cantonal level. At the federal level, the Swiss Confederation introduced on 1 July 2006 the new Federal 'Freedom of Information Act'. Also the Swiss Federal Nuclear Safety Inspectorate (I-ISK) falls under this rule. Before introduction of this law on transparency. most of the documents of Swiss federal Administration were treated as confidential. Access rights to official documents were granted only on certain conditions and in special cases. But there is a general interest, that the public should have the possibility to ask to look at the files of the administration. Since years, the administration had no longer been able to hide behind secretiveness. For instance, the introduction of Internet brought a lot of transparency. The administration had to explain what sort of job it is actually doing and how it is doing. Also, the media were and are increasing their research for information. In this context, the new law on transparency ('Freedom of Information Act') is rather an evolution than a revolution. The Freedom of Information Act guarantees the public access to official documents. Most of the documents of the Federal Administration are public. This access can be limited, differentiated or refused in certain cases. That means that the principle of proportionality between private interests and public transparency has to be applied. The real challenge for the authority is the trade off between the public's right to access information and the industrial legitimate efforts to protect industrial and trade secrets. In the nuclear field, the international principle of transparency has also become an important national principle for Switzerland and FISK. The Swiss Nuclear Energy Act says that 'The relevant authorities shall regularly inform the general

Highly Conductive Transparent and Flexible Electrodes Including Double-Stacked Thin Metal Films for Transparent Flexible Electronics.

Science.gov (United States)

Han, Jun Hee; Kim, Do-Hong; Jeong, Eun Gyo; Lee, Tae-Woo; Lee, Myung Keun; Park, Jeong Woo; Lee, Hoseung; Choi, Kyung Cheol

2017-05-17

To keep pace with the era of transparent and deformable electronics, electrode functions should be improved. In this paper, an innovative structure is suggested to overcome the trade-off between optical and electrical properties that commonly arises with transparent electrodes. The structure of double-stacked metal films showed high conductivity (electronics are expected.

Transparency of nuclear regulatory activities

International Nuclear Information System (INIS)

2007-01-01

One of the main missions of nuclear regulators is to protect the public, and this cannot be completely achieved without public confidence. The more a regulatory process is transparent, the more such confidence will grow. Despite important cultural differences across countries, a number of common features characterise media and public expectations regarding any activity with an associated risk. A common understanding of transparency and main stakeholders' expectations in the field of nuclear safety were identified during this workshop, together with a number of conditions and practices aimed at improving the transparency of nuclear regulatory activities. These conditions and practices are described herein, and will be of particular interest to all those working in the nuclear regulatory field. Their implementation may, however, differ from one country to another depending on national context. (authors)

Thickness-self-controlled synthesis of porous transparent polyaniline-reduced graphene oxide composites towards advanced bifacial dye-sensitized solar cells

Science.gov (United States)

Wang, Yu-Sheng; Li, Shin-Ming; Hsiao, Sheng-Tsung; Liao, Wei-Hao; Yang, Shin-Yi; Tien, Hsi-Wen; Ma, Chen-Chi M.; Hu, Chi-Chang

2014-08-01

A powerful synthesis strategy is proposed for fabricating porous polyaniline-reduced graphene oxide (PANI-RGO) composites with transparency up to 80% and thickness from 300 to 1000 nm for the counter electrode (CE) of bifacial dye-sensitizing solar cells (DSSCs). The first step is to combine the in-situ positive charge transformation of graphene oxide (GO) through aniline (ANI) prepolymerization and the electrostatic adsorption of ANI oligomer-GO to effectively control the thickness of ultrathin PANI-GO films by adjusting pH of the polymerization media. In the second step, PANI-GO films are reduced with hydroiodic acid to simultaneously enhance the apparent redox activity for the I3-/I- couple and their electronic conductivity. Incorporating the RGO increases the transparency of PANI and facilitates the light-harvesting from the rear side. A DSSC assembled with such a transparent PANI-RGO CE exhibits an excellent efficiency of 7.84%, comparable to 8.19% for a semi-transparent Pt-based DSSC. The high light-harvesting ability of PANI-RGO enhances the efficiency retention between rear- and front-illumination modes to 76.7%, compared with 69.1% for a PANI-based DSSC. The higher retention reduces the power-to-weight ratio and the total cost of bifacial DSSCs, which is also promising in other applications, such as windows, power generators, and panel screens.

Optically Transparent Nano-Patterned Antennas: A Review and Future Directions

Directory of Open Access Journals (Sweden)

Seung Yoon Lee

2018-05-01

Full Text Available Transparent antennas have been continuously developed for integration with solar cells, vehicular communications, and ultra-high-speed communications such as 5G in recent years. A transparent antenna takes advantage of spatial extensibility more so than all other antennas in terms of wide range of usable area. In addition, the production price of transparent antennas is steadily decreasing due to the development of nano-process technology. This paper reviews published studies of transparent antennas classified by various materials in terms of optical transmittance and electrical, sheet resistance. The transparent electrodes for the transparent antenna are logically classified and the transparent antennas are described according to the characteristics of each electrode. Finally, the contributions transparent antennas can make toward next-generation 5G high-speed communication are discussed.

Transparency | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Transparency means openness. It allows Canadians to hold the government accountable through the proactive release of information on government activities, programs, policies, and services in formats that are easy to find, access, and use. Transparency is the key element in the Government of Canada's Commitment to ...

Transparency in netchains : evaluation and perspective

NARCIS (Netherlands)

Hofstede, G.J.; Schepers, H.E.; Trienekens, J.H.

2003-01-01

This paper was written for KLICT to evaluate the focus area Transparency in Netchains. It revisits the definitions and research agenda in the review paper with which the focal area started (Hofstede 2002). The definition of transparency has turned out to serve its purpose. The research has

Graphene Transparent Conductive Electrodes for Next- Generation Microshutter Arrays

Science.gov (United States)

Li, Mary; Sultana, Mahmooda; Hess, Larry

2012-01-01

Graphene is a single atomic layer of graphite. It is optically transparent and has high electron mobility, and thus has great potential to make transparent conductive electrodes. This invention contributes towards the development of graphene transparent conductive electrodes for next-generation microshutter arrays. The original design for the electrodes of the next generation of microshutters uses indium-tin-oxide (ITO) as the electrode material. ITO is widely used in NASA flight missions. The optical transparency of ITO is limited, and the material is brittle. Also, ITO has been getting more expensive in recent years. The objective of the invention is to develop a graphene transparent conductive electrode that will replace ITO. An exfoliation procedure was developed to make graphene out of graphite crystals. In addition, large areas of single-layer graphene were produced using low-pressure chemical vapor deposition (LPCVD) with high optical transparency. A special graphene transport procedure was developed for transferring graphene from copper substrates to arbitrary substrates. The concept is to grow large-size graphene sheets using the LPCVD system through chemical reaction, transfer the graphene film to a substrate, dope graphene to reduce the sheet resistance, and pattern the film to the dimension of the electrodes in the microshutter array. Graphene transparent conductive electrodes are expected to have a transparency of 97.7%. This covers the electromagnetic spectrum from UV to IR. In comparison, ITO electrodes currently used in microshutter arrays have 85% transparency in mid-IR, and suffer from dramatic transparency drop at a wavelength of near-IR or shorter. Thus, graphene also has potential application as transparent conductive electrodes for Schottky photodiodes in the UV region.

Pseudocapacitive Transparent/Flexible Supercapacitor based on Graphene wrapped Ni(OH)2 Nanosheet Transparent Film Produced using Scalable Bio-inspired Methods

International Nuclear Information System (INIS)

Li, Na; Huang, Xuankai; Li, Ruijian; Chen, Yiming; Li, Yunyong; Shi, Zhicong; Zhang, Haiyan

2016-01-01

High specific-capacity pseudocapacitive transition-metal-hydroxide (TMH) materials are desirable for future high performance transparent supercapacitors, but have been rarely reported previously. The successful synthesis of TMH materials with desired nanostructures is a key factor for their transparency. Here, Ni(OH) 2 nanosheet transparent film (NNS-TF) was developed simply through a gas-liquid diffusion method. The nanostructures were enwrapped in graphene shells (NNS@Gr-TF) for using as transparent electrodes. The unique encapsulation structures build up rapid three-dimensional electron and ion transport pathways together with the underlying ITO layer. The specific areal capacitance (18.9 mF/cm 2 at 0.1 mA/cm 2 ) was greatly improved, at least a thousand times higher than the reported value for transparent devices based on planer CVD graphene, and ten times as that for 3D micro-structured graphene membrane.

Methodological aspects transparency financial statements of construction companies

Directory of Open Access Journals (Sweden)

O. V. Rozhnova

2016-01-01

Full Text Available In modern society, in terms of general information and integration of the economies, information is one of the main market products. There is becoming urgent task of improving financial statement transparency for enterprises in this situation. One of the most challenging in improving transparency can be considered the construction industry, because of the pursuit of privacy and a high degree of corruption. The paper analyzes the possible reasons for reducing the level of transparency in the construction industry companies. The paper highlighted the general and particular causes that affect the transparency of financial reporting of construction enterprises. Common causes are relevant for companies in any industry, and private causes show features characteristic of the construction itself. In addition, the paper analyzes the various methods of increasing the transparency used by companies all over the world. The analysis highlighted the internal and external methods for improving the transparency of financial statements and transparency of construction companies. Leadership and employees at the enterprise level providing transparency of financial reporting, and non-financial information about the company, having interest to stakeholders, carry out internal methods. External methods are applied at the macro level as the joint forces of the enterprises of the construction industry to form associations and the state. The analysis also considered the possibility of using these methods by the Russian construction companies and advantages and disadvantages of their application.

Bilateral teleoperation control to improve transparency in stiff environment with time delay

Directory of Open Access Journals (Sweden)

M. Azadegan

2014-09-01

Full Text Available This paper proposes a new bilateral control scheme to ensure both transparency and robust stability under unknown constant time delay in stiff environment. Furthermore, this method guaranties suitable performance and robust stability when transition occurs between soft and stiff environments. This framework is composed of an adaptive sliding mode controller and an adaptive impedance controller, where online estimation of the environment impedance is performed, and then used as the desired impedance at the master side. Numerical simulations are provided to verify the theoretical results under different conditions, such as constant and time-varying delay, obstructed environment and transitioning between soft and stiff environment. Afterwards, comparison with a recent work is addressed.

Transparency in public-private partnerships : Not so bad after all?

NARCIS (Netherlands)

Reynaers, Anne Marie; Grimmelikhuijsen, Stephan

2015-01-01

Scholars' criticism of transparency in public-private partnerships (PPPs) often focuses on 'external' transparency, that is, the extent to which internal information is visible to the outside world. However, to achieve external transparency, internal transparency - the availability and inferability

Wake structure of a single vertical axis wind turbine

International Nuclear Information System (INIS)

Posa, Antonio; Parker, Colin M.; Leftwich, Megan C.; Balaras, Elias

2016-01-01

Highlights: • The wake structure of an isolated Vertical Axis Wind Turbine is studied by both Particle Imaging Velocimetry and Large Eddy Simulation. • The wake structure is investigated for two values of tip speed ratio, TSR_1=1.35 and TSR_2=2.21. • A displacement of the momentum deficit towards the windward side is verified in the wake. • Higher turbulence and coherence is observed on the leeward side of the wake, due to the upwind stall of the blades. • Coherence in the wake core, associated to the downwind stall, decays quickly downstream. - Abstract: The wake structure behind a vertical axis wind turbine (VAWT) is both measured in a wind tunnel using particle imaging velocimetry (PIV) and computed with large-eddy simulation (LES). Geometric and dynamic conditions are closely matched to typical applications of VAWTs (Re_D ∼ 1.8 × 10"5). The experiments and computations were highly coordinated with continuous two-way feedback to produce the most insightful results. Good qualitative agreement is seen between the computational and experimental results. The dependence of the wake structure on the tip speed ratio, TSR, is investigated, showing higher asymmetry and larger vortices at the lower rotational speed, due to stronger dynamic stall phenomena. Instantaneous, ensemble-averaged and phase-averaged fields are discussed, as well as the dynamics of coherent structures in the rotor region and downstream wake.

Transparency -- Some observations

International Nuclear Information System (INIS)

Houck, F.

1994-01-01

The increasingly popular term transparency has been used throughout the IAEA Safeguards Symposium to mean many things to many people. It has rather little utility as a catch-all term or buzz word. A precise definition of transparency is in order. In this paper, transparency is the provision to the IAEA of additional information for which the IAEA has an identified use and includes any associated increased IAEA access to sue the information. In 1993, the IAEA Board endorsed very specific proposals for provision to the IAEA of additional information on international nuclear transfers. It also made specific decisions on verification in the context of tis earlier confirmation of the very sweeping access rights for special inspections outlined by the director general. Additional information to the IAEA has two potential practical uses. First, it could help identify inconsistencies within the entirety of the information available to the IAEA, including information from inspections. These inconsistencies could be an indication of some violation of safeguards undertakings. Second, a declaration of the Member State could facilitate IAEA interpretation of analyses of other information or facilitate resolution of ambiguities. In these respects, additional information is not different from currently used information. When considering seeking specific additional information, the IAEA must balance the potential contribution of the information and its expected costs

Transparency in public-private partnerships: not so bad after all?

NARCIS (Netherlands)

Reynaers, A.; Grimmelikhuijsen, S.

2015-01-01

Scholars' criticism of transparency in public-private partnerships (PPPs) often focuses on ‘external’ transparency, that is, the extent to which internal information is visible to the outside world. However, to achieve external transparency, internal transparency - the availability and inferability

Broadband plasmon induced transparency in terahertz metamaterials

KAUST Repository

Zhu, Zhihua; Yang, Xu; Gu, Jianqiang; Jiang, Jun; Yue, Weisheng; Tian, Zhen; Tonouchi, Masayoshi; Han, Jiaguang; Zhang, Weili

2013-01-01

Plasmon induced transparency (PIT) could be realized in metamaterials via interference between different resonance modes. Within the sharp transparency window, the high dispersion of the medium may lead to remarkable slow light phenomena

Public Transparency

OpenAIRE

UNCTAD; World Bank

2018-01-01

This note provides guidance on the type of information about agricultural investments that investors and governments can make publicly available. Transparency about certain aspects of investments can improve relations between investors and communities, enable external stakeholders to hold investors to commitments, and improve investors’ public image. Although some information should be kep...

UV and γ-ray resistance of poly(N-methylmaleimide-alt-isobutene) and poly(diisopropyl fumarate) as transparent polymer films

Science.gov (United States)

Imaizumi, Ryota; Furuta, Masakazu; Okamura, Haruyuki; Matsumoto, Akikazu

2017-09-01

UV and γ-ray resistance of transparent polymers obtained by radical polymerization of maleic and fumaric acid derivatives, i.e., an alternating copolymer of N-methylmaleimide and isobutene (PMI) and poly(diisopropyl fumarate) (PDiPF), was investigated. Transmittance in UV and visible regions of these polymers were examined after UV irradiation and compared with the results for poly(methyl methacrylate) (PMMA) and polycarbonate (PC) as conventional transparent polymers. The order of stability toward UV irradiation was PMMA≈PDiPF>PMI>>PC, deduced from changes in the transmittance of 380 nm light. Tensile mechanical properties, such as elastic modulus, maximum strength, and elongation values of PMI, PDiPF, and PMMA were also investigated after UV and γ-radiation. UV irradiation induced the side chain scission of PMI and PDiPF via Norrish I type reaction as well as crosslinking by combination between formed polymer radicals, leading to deterioration in their optical and mechanical properties. γ-radiation induced significant changes in molecular weight and mechanical properties of the polymers. In conclusion, PMI exhibited unchanged mechanical properties and PDiPF maintained its high transparency under various irradiation conditions.

High performance vertical tunneling diodes using graphene/hexagonal boron nitride/graphene hetero-structure

Energy Technology Data Exchange (ETDEWEB)

Hwan Lee, Seung; Lee, Jia; Ho Ra, Chang; Liu, Xiaochi; Hwang, Euyheon [Samsung-SKKU Graphene Center (SSGC), Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Department of Nano Science and Technology, SKKU Advanced Institute of Nano-Technology (SAINT), Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Sup Choi, Min [Department of Nano Science and Technology, SKKU Advanced Institute of Nano-Technology (SAINT), Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Center for Human Interface Nano Technology (HINT), Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Hee Choi, Jun [Frontier Research Laboratory, Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., Yongin, Gyeonggi-do 446-711 (Korea, Republic of); Zhong, Jianqiang; Chen, Wei [Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117542 (Singapore); Department of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543 (Singapore); Jong Yoo, Won, E-mail: yoowj@skku.edu [Samsung-SKKU Graphene Center (SSGC), Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Department of Nano Science and Technology, SKKU Advanced Institute of Nano-Technology (SAINT), Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Center for Human Interface Nano Technology (HINT), Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of)

2014-02-03

A tunneling rectifier prepared from vertically stacked two-dimensional (2D) materials composed of chemically doped graphene electrodes and hexagonal boron nitride (h-BN) tunneling barrier was demonstrated. The asymmetric chemical doping to graphene with linear dispersion property induces rectifying behavior effectively, by facilitating Fowler-Nordheim tunneling at high forward biases. It results in excellent diode performances of a hetero-structured graphene/h-BN/graphene tunneling diode, with an asymmetric factor exceeding 1000, a nonlinearity of ∼40, and a peak sensitivity of ∼12 V{sup −1}, which are superior to contending metal-insulator-metal diodes, showing great potential for future flexible and transparent electronic devices.

Magnetic charges in the AdS(4) superalgebra osp(4 vertical bar 2)

NARCIS (Netherlands)

Dibitetto, Giuseppe; Klemm, Dietmar

2010-01-01

We discuss the issue of how to include magnetic charges in the AdS(4) superalgebra osp(4 vertical bar 2). It is shown that the usual way of introducing a pseudoscalar central charge on the right hand side of the basic anticommutator does not work, because this breaks SO(2, 3) covariance. We propose

Broadband plasmon induced transparency in terahertz metamaterials

International Nuclear Information System (INIS)

Zhu Zhihua; Yang Xu; Gu Jianqiang; Jiang Jun; Tian Zhen; Han Jiaguang; Zhang Weili; Yue Weisheng; Tonouchi, Masayoshi

2013-01-01

Plasmon induced transparency (PIT) could be realized in metamaterials via interference between different resonance modes. Within the sharp transparency window, the high dispersion of the medium may lead to remarkable slow light phenomena and an enhanced nonlinear effect. However, the transparency mode is normally localized in a narrow frequency band, which thus restricts many of its applications. Here we present the simulation, implementation, and measurement of a broadband PIT metamaterial functioning in the terahertz regime. By integrating four U-shape resonators around a central bar resonator, a broad transparency window across a frequency range greater than 0.40 THz is obtained, with a central resonance frequency located at 1.01 THz. Such PIT metamaterials are promising candidates for designing slow light devices, highly sensitive sensors, and nonlinear elements operating over a broad frequency range. (paper)

TRANSPARENCY IN ELECTRONIC BUSINESS NEGOTIATIONS – EVIDENCE BASED ANALYSIS

Directory of Open Access Journals (Sweden)

Radoslav Delina

2014-12-01

Full Text Available Purpose: In current economy, where ICT plays a crucial role for being competitive and effective, businesses are facing higher pressures of flexibility and efficiency than ever before. Transparency is often considered as a suitable mechanism for better market prices and more efficient market environment. Electronic business environment provides the possibility to set up more transparent environment and bring higher competitiveness and efficiency on the market. The paper analyse the impact of transparency on prices in e-procurement.Methodology: Reverse auctions are considered as transparent tool simulating in partial level real competition. Together, it allows to examine several levels of transparency set up in auction negotiation process. The impact of transparency on final prices was analysed on real data using relation based analysis were different situations of transparency set up is compared against achieved final price.Findings: Research results based on real data shows, that generally, the transparency in electronic reverse auction can lead to more negative prices agreed by purchasers as current scientific and commercial promotions.Research limitation: Significance of research results is limited due to still low readiness and skills of e-procurers. The validation of results is needed to realized within longer period of time and from environments with different level of e-readiness. Together, it reveal that transparency is more complex issue where the significance of transparency can reveal its sense in some specific situations on the market and negotiation.Value of paper: Evidenced based research reveal some controversy results which support new scientific efforts in microeconomics and socio-economic impact of ICT fields. Together, it affects real practitioners in way how to use and perceive claimed impact of reverse auction solutions.

76 FR 7522 - Federal Acquisition Regulation; Enhancing Contract Transparency

Science.gov (United States)

2011-02-10

... transparency while retaining the protection of information that should be considered in the contracting process... the need for transparency in Government contracting information and believe these recommendations... Regulation; Enhancing Contract Transparency AGENCY: Department of Defense (DoD), General Services...

Overview of Russian HEU transparency issues

International Nuclear Information System (INIS)

Kempf, C.R.; Bieniawski, A.

1993-01-01

The U.S. has signed an agreement with the Russian Federation for the purchase of 500 metric tons of highly-enriched uranium (HEU) taken from dismantled nuclear weapons. The HEU will be blended down to low-enriched uranium and will be transported to the U.S. to be used by fuel fabricators to make fuel for commercial nuclear power plants. Both the U.S. and Russia have been preparing to institute transparency measures to provide assurance that nonproliferation and arms control objectives specified in the agreement are met. This paper provides background information on the original agreement and on subsequent negotiations with the Russians, as well as discussion of technical aspects of developing transparency measures suited to the facilities and processes which are expected to be involved. Transparency has been defined as those agreed-upon measures which build confidence that arms control and non-proliferation objectives shared by the parties are met. Transparency is a departure from exhaustive, detailed arms control verification regimes of past agreements, which were based on a presumption of detecting transgressions as opposed to confirming compliance

Optimal Degrees of Transparency in Monetary Policymaking

DEFF Research Database (Denmark)

Jensen, Henrik

2002-01-01

According to most academics and policymakers, transparency in monetary policymaking is desirable. I examine this proposition in a small theoretical model emphasizing forward-looking private sector behavior. Transparency makes it easier for price setters to infer the central bank's future policy...... intentions, thereby making current inflation more responsive to policy actions. This induces the central bank to pay more attention to inflation rather than output gap stabilization. Then, transparency may be disadvantageous. It may actually be a policy-distorting straitjacket if the central bank enjoys low...

Tin oxide transparent thin-film transistors

International Nuclear Information System (INIS)

Presley, R E; Munsee, C L; Park, C-H; Hong, D; Wager, J F; Keszler, D A

2004-01-01

A SnO 2 transparent thin-film transistor (TTFT) is demonstrated. The SnO 2 channel layer is deposited by RF magnetron sputtering and then rapid thermal annealed in O 2 at 600 deg. C. The TTFT is highly transparent, and enhancement-mode behaviour is achieved by employing a very thin channel layer (10-20 nm). Maximum field-effect mobilities of 0.8 cm 2 V -1 s -1 and 2.0 cm 2 V -1 s -1 are obtained for enhancement- and depletion-mode devices, respectively. The transparent nature and the large drain current on-to-off ratio of 10 5 associated with the enhancement-mode behaviour of these devices may prove useful for novel gas-sensor applications

25 Years of Transparency Research : Evidence and Future Directions

NARCIS (Netherlands)

Cucciniello, Maria; Porumbescu, Gregory A.; Grimmelikhuijsen, Stephan|info:eu-repo/dai/nl/313875405

2017-01-01

This article synthesizes the cross-disciplinary literature on government transparency. It systematically reviews research addressing the topic of government transparency published between 1990 and 2015. The review uses 187 studies to address three questions: (1) What forms of transparency has the

Transparency in Global Environmental Governance: A Coming of Age?

NARCIS (Netherlands)

Gupta, A.

2010-01-01

This introductory article draws on the contributions to this special issue to consider the implications of a transparency turn in global environmental and sustainability governance. Three interrelated aspects are addressed: why transparency now? How is transparency being institutionalized? And what

Vertical ridge augmentation using xenogenous bone blocks: a comparison between the flap and tunneling procedures.

Science.gov (United States)

Xuan, Feng; Lee, Chun-Ui; Son, Jeong-Seog; Fang, Yiqin; Jeong, Seung-Mi; Choi, Byung-Ho

2014-09-01

Previous studies have shown that the subperiosteal tunneling procedure in vertical ridge augmentation accelerates healing after grafting and prevents graft exposure, with minor postoperative complications. It is conceivable that new bone formation would be greater with the tunneling procedure than with the flap procedure, because the former is minimally invasive. This hypothesis was tested in this study by comparing new bone formation between the flap and tunneling procedures after vertical ridge augmentation using xenogenous bone blocks in a canine mandible model. Two Bio-Oss blocks were placed on the edentulous ridge in each side of the mandibles of 6 mongrel dogs. The blocks in each side were randomly assigned to grafting with a flap procedure (flap group) or grafting with a tunneling procedure (tunneling group). The mean percentage of newly formed bone within the block was 15.3 ± 6.6% in the flap group and 46.6 ± 23.4% in the tunneling group. Based on data presented in this study, when a tunneling procedure is used to place xenogenous bone blocks for vertical ridge augmentation, bone formation in the graft sites is significantly greater than when a flap procedure is used. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

"On Cloud Nine" and "On All Fours": Which Is More Transparent? Elements in EFL Learners' Transparency Assumptions

Science.gov (United States)

Lin, Crystal Jia-yi

2015-01-01

Idiom transparency refers to how speakers think the meaning of the individual words contributes to the figurative meaning of an idiom as a whole (Gibbs, Nayak, & Cutting, 1989). However, it is not clear how speakers or language learners form their assumptions about an idiom's transparency level. This study set out to discover whether there are…

Fiscal transparency, political parties, and debt in OECD countries

DEFF Research Database (Denmark)

Alt, James E.; Lassen, David Dreyer

2006-01-01

Many believe and argue that fiscal, or budgetary, transparency has large, positive effects on fiscal performance. However, the evidence linking transparency and fiscal policy outcomes is less compelling. To analyze the effects of fiscal transparency on public debt accumulation, we present a career...

Transparency in Supply Chains: Is Trust a Limiting Factor?

OpenAIRE

Frentrup, Mechthild; Theuvsen, Ludwig

2006-01-01

Transparency has gained much relevance in food chains. This paper summarizes the determinants of transparency and points out that transparency in the sense of effective information exchange needs trust as a mediator in order to become a powerful tool in supply chain management. In addition to that this paper analyses the characteristics of trust and highlights the reciprocal and dynamic mechanisms of trust on transparency and vice versa. It is argued that both constructs should be enhanced at...

The Value of Transparency in Distributed Solar PV Markets

Energy Technology Data Exchange (ETDEWEB)

OShaughnessy, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zamzam, Ahmed S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-12-01

Market transparency refers to the degree of customer awareness of product options and fair market prices for a given good. In The Value of Transparency in Distributed Solar PV Markets, we use residential solar photovoltaic (PV) quote data to study the value of transparency in distributed solar PV markets. We find that improved market transparency results in lower installation offer prices. Further, the results of this study suggest that PV customers benefit from gaining access to more PV quotes.

Broadband plasmon induced transparency in terahertz metamaterials

KAUST Repository

Zhu, Zhihua

2013-04-25

Plasmon induced transparency (PIT) could be realized in metamaterials via interference between different resonance modes. Within the sharp transparency window, the high dispersion of the medium may lead to remarkable slow light phenomena and an enhanced nonlinear effect. However, the transparency mode is normally localized in a narrow frequency band, which thus restricts many of its applications. Here we present the simulation, implementation, and measurement of a broadband PIT metamaterial functioning in the terahertz regime. By integrating four U-shape resonators around a central bar resonator, a broad transparency window across a frequency range greater than 0.40 THz is obtained, with a central resonance frequency located at 1.01 THz. Such PIT metamaterials are promising candidates for designing slow light devices, highly sensitive sensors, and nonlinear elements operating over a broad frequency range. © 2013 IOP Publishing Ltd.

The Design, Fabrication and Characterization of a Transparent Atom Chip

Directory of Open Access Journals (Sweden)

Ho-Chiao Chuang

2014-06-01

Full Text Available This study describes the design and fabrication of transparent atom chips for atomic physics experiments. A fabrication process was developed to define the wire patterns on a transparent glass substrate to create the desired magnetic field for atom trapping experiments. An area on the chip was reserved for the optical access, so that the laser light can penetrate directly through the glass substrate for the laser cooling process. Furthermore, since the thermal conductivity of the glass substrate is poorer than other common materials for atom chip substrate, for example silicon, silicon carbide, aluminum nitride. Thus, heat dissipation copper blocks are designed on the front and back of the glass substrate to improve the electrical current conduction. The testing results showed that a maximum burnout current of 2 A was measured from the wire pattern (with a width of 100 μm and a height of 20 μm without any heat dissipation design and it can increase to 2.5 A with a heat dissipation design on the front side of the atom chips. Therefore, heat dissipation copper blocks were designed and fabricated on the back of the glass substrate just under the wire patterns which increases the maximum burnout current to 4.5 A. Moreover, a maximum burnout current of 6 A was achieved when the entire backside glass substrate was recessed and a thicker copper block was electroplated, which meets most requirements of atomic physics experiments.

The Design, Fabrication and Characterization of a Transparent Atom Chip

Science.gov (United States)

Chuang, Ho-Chiao; Huang, Chia-Shiuan; Chen, Hung-Pin; Huang, Chi-Sheng; Lin, Yu-Hsin

2014-01-01

This study describes the design and fabrication of transparent atom chips for atomic physics experiments. A fabrication process was developed to define the wire patterns on a transparent glass substrate to create the desired magnetic field for atom trapping experiments. An area on the chip was reserved for the optical access, so that the laser light can penetrate directly through the glass substrate for the laser cooling process. Furthermore, since the thermal conductivity of the glass substrate is poorer than other common materials for atom chip substrate, for example silicon, silicon carbide, aluminum nitride. Thus, heat dissipation copper blocks are designed on the front and back of the glass substrate to improve the electrical current conduction. The testing results showed that a maximum burnout current of 2 A was measured from the wire pattern (with a width of 100 μm and a height of 20 μm) without any heat dissipation design and it can increase to 2.5 A with a heat dissipation design on the front side of the atom chips. Therefore, heat dissipation copper blocks were designed and fabricated on the back of the glass substrate just under the wire patterns which increases the maximum burnout current to 4.5 A. Moreover, a maximum burnout current of 6 A was achieved when the entire backside glass substrate was recessed and a thicker copper block was electroplated, which meets most requirements of atomic physics experiments. PMID:24922456

Flow regimes and heat transfer in vertical narrow annuli

International Nuclear Information System (INIS)

Ulke, A.; Goldberg, I.

1993-01-01

In shell side boiling heat exchangers narrow crevices that are formed between the tubes and the tube support structure provide areas for local thermal-hydraulic conditions which differ significantly from bulk fluid conditions. Understanding of the processes of boiling and dryout in flow restricted crevices can help in designing of tube support geometries to minimize the likelihood of tube support plate and tube corrosion observed in commercial power plant steam generators. This paper describes a one dimensional thermal-hydraulic model of a vertical crevice between a tube and a support plate with cylindrical holes. The annulus formed by the support plate hole and an eccentrically located tube has been represented by vertical strips. The formation, growth and collapse of a steam bubble in each strip has been determined. Based on the bubble history, and flow regimes characterized by ''isolated'' bubbles, ''coalesced'' bubbles and liquid deficient regions have been defined

Outside finance, dominant investors and strategic transparency

NARCIS (Netherlands)

Perotti, E.C.; von Thadden, E.-L.

2000-01-01

This paper studies optimal financial contracts and product market competition under a strategic transparency decision. When firms seeking outside finance resort to actively monitored debt in order to commit against opportunistic behaviour, the dominant lender can influence corporate transparency.

Impact Analysis of Reinforced Concrete Columns with Side Openings Subjected to Eccentric Axial Loads

Directory of Open Access Journals (Sweden)

Nazar Kamil Ali

2015-02-01

Full Text Available In this research the behavior of reinforced concrete columns with large side openings under impact loads was studied. The overall cross sectional dimensions of the column specimens used in this research were (500*1400 mm with total height of (14000 mm. The dimensions of side openings were (600*2000 mm. The column was reinforced with (20 mm diameter in longitudinal direction, while (12 mm ties were used in the transverse direction. The effect of eccentric impact loads on the horizontal and vertical displacement for this column was studied. Nonlinear finite element analysis has been carried out using ready computer finite element package (ANSYS to simulate the behavior of the reinforced concrete column with large side openings. Two load cases were considered in this investigation (C1, C2 with three different load values for each case. In the first case (C1 the loads was applied to one side of the column and in the second case (C2 the loads was applied to both sides. An Equilateral triangular load-time function was used for simulation the impact load results from gantry cranes supported by the column with total time duration (0.1 sec. In order to verify the analysis method, as no experimental data exist for comparing the obtained results, another analysis is made for tested conventional column under impact load at mid-height and good agreement has been obtained. For the above mentioned column, the maximum displacements were (33.3, 22.2 mm in the horizontal and longitudinal direction respectively, location of the maximum horizontal displacement was at the crown of the column. By comparing the results of the first loading case with the second one it is shown that in the horizontal direction, maximum displacement increases by (139%, (208%, and (147% respectively, also the maximum vertical displacement increases by (150%, (172%, and (172% respectively.

Does doxastic transparency support evidentialism?

DEFF Research Database (Denmark)

Steglich-Petersen, Asbjørn

2008-01-01

Nishi Shah has recently argued that transparency in doxastic deliberation supports a strict version of evidentialism about epistemic reasons. I argue that Shah’s argument relies on a principle that is incompatible the strict version of evidentialism Shah wishes to advocate.......Nishi Shah has recently argued that transparency in doxastic deliberation supports a strict version of evidentialism about epistemic reasons. I argue that Shah’s argument relies on a principle that is incompatible the strict version of evidentialism Shah wishes to advocate....

Transparent solar antenna of 28 GHz using transparent conductive oxides (TCO) thin film

International Nuclear Information System (INIS)

Mohd Ali, N I; Misran, N; Mansor, M F; Jamlos, M F

2017-01-01

This paper presents the analysis of 28GHz solar patch antenna using the variations of transparent conductive oxides (TCO) thin film as the radiating patch. Solar antenna is basically combining the function of antenna and solar cell into one device and helps to maximize the usage of surface area. The main problem of the existing solar antenna is the radiating patch which made of nontransparent material, such as copper, shadowing the solar cell and degrades the total solar efficiency. Hence, by using the transparent conductive oxides (TCO) thin film as the radiating patch, this problem can be tackled. The TCO thin film used is varied to ITO, FTO, AgHT-4, and AgHT-8 along with glass as substrate. The simulation of the antenna executed by using Computer Simulation Technology (CST) Microwave Studio software demonstrated at 28 GHz operating frequency for 5G band applications. The performance of the transparent antennas is compared with each other and also with the nontransparent patch antenna that using Rogers RT5880 as substrate, operating at the same resonance frequency and then, the material that gives the best performance is identified. (paper)

Transparent solar antenna of 28 GHz using transparent conductive oxides (TCO) thin film

Science.gov (United States)

Ali, N. I. Mohd; Misran, N.; Mansor, M. F.; Jamlos, M. F.

2017-05-01

This paper presents the analysis of 28GHz solar patch antenna using the variations of transparent conductive oxides (TCO) thin film as the radiating patch. Solar antenna is basically combining the function of antenna and solar cell into one device and helps to maximize the usage of surface area. The main problem of the existing solar antenna is the radiating patch which made of nontransparent material, such as copper, shadowing the solar cell and degrades the total solar efficiency. Hence, by using the transparent conductive oxides (TCO) thin film as the radiating patch, this problem can be tackled. The TCO thin film used is varied to ITO, FTO, AgHT-4, and AgHT-8 along with glass as substrate. The simulation of the antenna executed by using Computer Simulation Technology (CST) Microwave Studio software demonstrated at 28 GHz operating frequency for 5G band applications. The performance of the transparent antennas is compared with each other and also with the nontransparent patch antenna that using Rogers RT5880 as substrate, operating at the same resonance frequency and then, the material that gives the best performance is identified.

Transparent Memory For Harsh Electronics

KAUST Repository

Ho, C. H.

2017-03-14

As a new class of non-volatile memory, resistive random access memory (RRAM) offers not only superior electronic characteristics, but also advanced functionalities, such as transparency and radiation hardness. However, the environmental tolerance of RRAM is material-dependent, and therefore the materials used must be chosen carefully in order to avoid instabilities and performance degradation caused by the detrimental effects arising from environmental gases and ionizing radiation. In this work, we demonstrate that AlN-based RRAM displays excellent performance and environmental stability, with no significant degradation to the resistance ratio over a 100-cycle endurance test. Moreover, transparent RRAM (TRRAM) based on AlN also performs reliably under four different harsh environmental conditions and 2 MeV proton irradiation fluences, ranging from 1011 to 1015 cm-2. These findings not only provide a guideline for TRRAM design, but also demonstrate the promising applicability of AlN TRRAM for future transparent harsh electronics.

Limits of transparency of transparent conducting oxides

Science.gov (United States)

Peelaers, Hartwin

A fundamental understanding of the factors that limit transparency in transparent conducting oxides (TCOs) is essential for further progress in materials and applications. These materials have a sufficiently large band gap, so that direct optical transitions do not lead to absorption of light within the visible spectrum. Since the presence of free carriers is essential for conductivity and thus for device applications, this introduces the possibility of additional absorption processes. In particular, indirect processes are possible, and these will constitute a fundamental limit of the material. The Drude theory is widely used to describe free-carrier absorption, but it is phenomenological in nature and tends to work poorly at shorter wavelengths, where band-structure effects are important. We will present calculations of phonon- and defect-assisted free-carrier absorption in a TCO completely from first principles. We will focus in detail on SnO2, but the methodology is general and we will also compare the results obtained for other TCO materials such as In2O3. These calculations provide not just quantitative results but also deeper insights in the mechanisms that govern absorption processes, which is essential for engineering improved materials to be used in more efficient devices. This work was performed in collaboration with E. Kioupakis and C.G. Van de Walle and was supported by ARO and NSF.

A Facile Way to Fabricate Transparent Superhydrophobic Surfaces.

Science.gov (United States)

Shi, Wentao; He, Ran; Yunus, Doruk E; Yang, Jie; Liu, Yaling

2018-07-01

A fast, easy, and low-cost way to fabricate transparent superhydrophobic (SHP) surfaces is developed. By simply mixing silica nanoparticles (SiNPs), polydimethylsiloxane (PDMS) and heptane to form a suspension, dip- or drop-coating the suspension onto different surfaces, transparent SHP surfaces can be obtained. By tuning the ratio of the three components above, transparency of the coating can reach more than 90% transmittance in the visible region, while static water contact angle of the coating can reach as high as 162°. Dynamic contact angle study shows the advancing contact angle and receding contact angle of water can be as high as 168° and 161°, and the resulting contact angle hysteresis can be as low as 7°. The reported facile way of fabricating transparent superhydrophobic (SHP) surfaces is potential for applications which need both optical transparency and self-cleaning capability, such as solar cells, optical equipment, and visible microfluidic chips.

Fabrication of single-crystalline plasmonic nanostructures on transparent and flexible amorphous substrates

Science.gov (United States)

Mori, Tomohiro; Mori, Takeshi; Tanaka, Yasuhiro; Suzaki, Yoshifumi; Yamaguchi, Kenzo

2017-02-01

A new experimental technique is developed for producing a high-performance single-crystalline Ag nanostructure on transparent and flexible amorphous substrates for use in plasmonic sensors and circuit components. This technique is based on the epitaxial growth of Ag on a (001)-oriented single-crystalline NaCl substrate, which is subsequently dissolved in ultrapure water to allow the Ag film to be transferred onto a wide range of different substrates. Focused ion beam milling is then used to create an Ag nanoarray structure consisting of 200 cuboid nanoparticles with a side length of 160 nm and sharp, precise edges. This array exhibits a strong signal and a sharp peak in plasmonic properties and Raman intensity when compared with a polycrystalline Ag nanoarray.

Quantification of Feeding Effects of Spot Feeding Ductile Iron Castings made in Vertically Parted Moulds

DEFF Research Database (Denmark)

Vedel-Smith, Nikolaj Kjelgaard; Tiedje, Niels Skat; Sällström, J.

In vertically parted molds it is traditionally difficult to feed heavy sections that cannot be reached by traditional side/top feeders or other conventional methods. This project aims at quantifying the effects of using molded-in ram-up spot feeders as a means of feeding isolated sections in cast...

Interplay between transparency and efficiency in dye sensitized solar cells.

Science.gov (United States)

Tagliaferro, Roberto; Colonna, Daniele; Brown, Thomas M; Reale, Andrea; Di Carlo, Aldo

2013-02-11

In this paper we analyze the interplay between transparency and efficiency in dye sensitized solar cells by varying fabrication parameters such as the thickness of the nano-crystalline TiO(2) layer, the dye loading and the dye type. Both transparency and efficiency show a saturation trend when plotted versus dye loading. By introducing the transparency-efficiency plot, we show that the relation between transparency and efficiency is linear and is almost independent on the TiO(2) thickness for a certain thickness range. On the contrary, the relation between transparency and efficiency depends strongly on the type of the dye. Moreover, we show that co-sensitization techniques can be effectively used to access regions of the transparency-efficiency space that are forbidden for single dye sensitization. The relation found between transparency and efficiency (T&E) can be the general guide for optimization of Dye Solar Cells in building integration applications.

Brightness and transparency in the early visual cortex.

Science.gov (United States)

Salmela, Viljami R; Vanni, Simo

2013-06-24

Several psychophysical studies have shown that transparency can have drastic effects on brightness and lightness. However, the neural processes generating these effects have remained unresolved. Several lines of evidence suggest that the early visual cortex is important for brightness perception. While single cell recordings suggest that surface brightness is represented in the primary visual cortex, the results of functional magnetic resonance imaging (fMRI) studies have been discrepant. In addition, the location of the neural representation of transparency is not yet known. We investigated whether the fMRI responses in areas V1, V2, and V3 correlate with brightness and transparency. To dissociate the blood oxygen level-dependent (BOLD) response to brightness from the response to local border contrast and mean luminance, we used variants of White's brightness illusion, both opaque and transparent, in which luminance increments and decrements cancel each other out. The stimuli consisted of a target surface and a surround. The surround luminance was always sinusoidally modulated at 0.5 Hz to induce brightness modulation to the target. The target luminance was constant or modulated in counterphase to null brightness modulation. The mean signal changes were calculated from the voxels in V1, V2, and V3 corresponding to the retinotopic location of the target surface. The BOLD responses were significantly stronger for modulating brightness than for stimuli with constant brightness. In addition, the responses were stronger for transparent than for opaque stimuli, but there was more individual variation. No interaction between brightness and transparency was found. The results show that the early visual areas V1-V3 are sensitive to surface brightness and transparency and suggest that brightness and transparency are represented separately.

Contour junctions defined by dynamic image deformations enhance perceptual transparency.

Science.gov (United States)

Kawabe, Takahiro; Nishida, Shin'ya

2017-11-01

The majority of work on the perception of transparency has focused on static images with luminance-defined contour junctions, but recent work has shown that dynamic image sequences with dynamic image deformations also provide information about transparency. The present study demonstrates that when part of a static image is dynamically deformed, contour junctions at which deforming and nondeforming contours are connected facilitate the deformation-based perception of a transparent layer. We found that the impression of a transparent layer was stronger when a dynamically deforming area was adjacent to static nondeforming areas than when presented alone. When contour junctions were not formed at the dynamic-static boundaries, however, the impression of a transparent layer was not facilitated by the presence of static surrounding areas. The effect of the deformation-defined junctions was attenuated when the spatial pattern of luminance contrast at the junctions was inconsistent with the perceived transparency related to luminance contrast, while the effect did not change when the spatial luminance pattern was consistent with it. In addition, the results showed that contour completions across the junctions were required for the perception of a transparent layer. These results indicate that deformation-defined junctions that involve contour completion between deforming and nondeforming regions enhance the perception of a transparent layer, and that the deformation-based perceptual transparency can be promoted by the simultaneous presence of appropriately configured luminance and contrast-other features that can also by themselves produce the sensation of perceiving transparency.

Transparent form-active system with structural glass

NARCIS (Netherlands)

Nikolaou, M.S.N.; Veer, F.A.; Eigenraam, P.

2015-01-01

Free-form transparent wide-span spatial structures which have being constructed so far, are based on the concept of three sets of components, the structural components, usually steel elements to ensure both compressive and tensional capacity; the glass cladding elements for expressing transparency;

Network structure and functional properties of transparent hydrogel sanxan produced by Sphingomonas sanxanigenens NX02.

Science.gov (United States)

Wu, Mengmeng; Shi, Zhong; Huang, Haidong; Qu, Jianmei; Dai, Xiaohui; Tian, Xuefeng; Wei, Weiying; Li, Guoqiang; Ma, Ting

2017-11-15

The micro-network structure and functional properties of sanxan, a novel polysaccharide produced by Sphingomonas sanxanigenens NX02, were investigated. Transparent hydrogel sanxan was a high acyl polymer containing 8.96% acetyl and 4.75% glyceroyl. The micro-network structure of sanxan was mainly cyclic configurations composed of side-by-side intermolecular associations, with many rounded nodes found. Sanxan exhibited predominant gelation behavior at concentrations above 0.1%, which was enhanced by adding cations, especially Ca 2+ . The gel strength of sanxan was much higher than that of low acyl gellan, but slightly lower than that of high acyl gellan. Furthermore, the conformation transition temperature was increased in the presence of added cations. Moreover, sanxan showed excellent emulsifying and emulsion stabilizing properties. Consequently, such excellent functional properties make sanxan a good candidate as a gelling, stabilizing, emulsifying, or suspending agent in food and cosmetics industries, and in medical and pharmaceutical usage. Copyright © 2017 Elsevier Ltd. All rights reserved.

Microcrystalline silicon carbide alloys prepared with HWCVD as highly transparent and conductive window layers for thin film solar cells

International Nuclear Information System (INIS)

Finger, F.; Astakhov, O.; Bronger, T.; Carius, R.; Chen, T.; Dasgupta, A.; Gordijn, A.; Houben, L.; Huang, Y.; Klein, S.; Luysberg, M.; Wang, H.; Xiao, L.

2009-01-01

Crystalline silicon carbide alloys have a very high potential as transparent conductive window layers in thin-film solar cells provided they can be prepared in thin-film form and at compatible deposition temperatures. The low-temperature deposition of such material in microcrystalline form (μc-Si:C:H) was realized by use of monomethylsilane precursor gas diluted in hydrogen with the Hot-Wire Chemical Vapor Deposition process. A wide range of deposition parameters has been investigated and the structural, electronic and optical properties of the μc-SiC:H thin films have been studied. The material, which is strongly n-type from unintentional doping, has been used as window layer in n-side illuminated microcrystalline silicon solar cells. High short-circuit current densities are obtained due to the high transparency of the material resulting in a maximum solar cell conversion efficiency of 9.2%.

Transparency in Canadian public drug advisory committees.

Science.gov (United States)

Rosenberg-Yunger, Zahava R S; Bayoumi, Ahmed M

2014-11-01

Transparency in health care resource allocation decisions is a criterion of a fair process. We used qualitative methods to explore transparency across 11 Canadian drug advisory committees. We developed seven criteria to assess transparency (disclosure of members' names, disclosure of membership selection criteria, disclosure of conflict of interest guidelines and members' conflicts, public posting of decisions not to fund drugs, public posting of rationales for decisions, stakeholder input, and presence of an appeals mechanism) and two sub-criteria for when rationales were posted (direct website link and readability). We interviewed a purposeful sample of key informants who were conversant in English and a current or past member of either a committee or a stakeholder group. We analyzed data using a thematic approach. Interviewing continued until saturation was reached. We examined documents from 10 committees and conducted 27 interviews. The median number of criteria addressed by committees was 2 (range 0-6). Major interview themes included addressing: (1) accessibility issues, including stakeholders' degree of access to the decision making process and appeal mechanisms; (2) communication issues, including improving internal and external communication and public access to information; and (3) confidentiality issues, including the use of proprietary evidence. Most committees have some mechanisms to address transparency but none had a fully transparent process. The most important ways to improve transparency include creating formal appeal mechanisms, improving communication, and establishing consistent rules about the use of, and public access to, proprietary evidence. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Temporal characteristics of polarization holographic gratings formed in a photosensitive polymeric film containing N-benzylideneaniline derivative side groups

Science.gov (United States)

Sasaki, Tomoyuki; Shoho, Takashi; Noda, Kohei; Kawatsuki, Nobuhiro; Ono, Hiroshi

2014-04-01

A polarization holographic grating was recorded in a transparent thin film formed from polymethacrylate with N-benzylideneaniline (NBA) derivative side groups. We measured the real time diffraction properties. The data were analyzed based on a theoretical model that accounted for the distribution of optical anisotropy caused by molecular reorientation as well as for surface relief (SR) deformation caused by molecular motion. Optical anisotropy rapidly increased and then slowly decreased, with increasing recording time. This phenomenon was described based on photoisomerization and photocleavage reactions of the NBA side groups. SR deformation was also induced in the film by polarization holographic recording, without any subsequent processes. The photoinduced optical anisotropy and SR deformation were retained after the recording was turned off.

Temporal characteristics of polarization holographic gratings formed in a photosensitive polymeric film containing N-benzylideneaniline derivative side groups

Energy Technology Data Exchange (ETDEWEB)

Sasaki, Tomoyuki, E-mail: sasaki-tomoy@vos.nagaokaut.ac.jp; Shoho, Takashi; Noda, Kohei; Ono, Hiroshi [Department of Electrical Engineering, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Kawatsuki, Nobuhiro [Department of Materials Science and Chemistry, Graduate School of Engineering, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2280 (Japan)

2014-04-21

A polarization holographic grating was recorded in a transparent thin film formed from polymethacrylate with N-benzylideneaniline (NBA) derivative side groups. We measured the real time diffraction properties. The data were analyzed based on a theoretical model that accounted for the distribution of optical anisotropy caused by molecular reorientation as well as for surface relief (SR) deformation caused by molecular motion. Optical anisotropy rapidly increased and then slowly decreased, with increasing recording time. This phenomenon was described based on photoisomerization and photocleavage reactions of the NBA side groups. SR deformation was also induced in the film by polarization holographic recording, without any subsequent processes. The photoinduced optical anisotropy and SR deformation were retained after the recording was turned off.

Laser assisted decontamination of metal surface: Evidence of increased surface absorptivity due to field enhancement caused by transparent/semi-transparent contaminant particulates

International Nuclear Information System (INIS)

Nilaya, J. Padma; Biswas, Dhruba J.

2010-01-01

Small signal absorption measurements of the incident coherent radiation by the metal surface have revealed an increase in the absorption by the surface in presence of transparent/semi-transparent particulates on it. This effect, identified as field enhanced surface absorption, has been found to increase with reduction in the average particulate size. Consequently higher laser assisted removal efficiency of contamination from a metal surface has been observed for smaller contaminant particulates. These measurements have been carried out utilizing coherent radiations of two different wavelengths so chosen that for one the particulates are totally transparent while for the other they are partially transparent.

Substantive Transparency Requirements in International Investment Law

NARCIS (Netherlands)

Pohl, Jens Hillebrand

2017-01-01

Few concepts in public governance evoke a more positive sentiment than transparency. Whether ultimately grounded in expediency or morality, transparency has emerged out of its municipal origins and been received at the international plane. This article examines the current state of evolution of the

78 FR 14149 - 2012 Fiscal Transparency Report

Science.gov (United States)

2013-03-04

.... Therefore, a published budget that does not include significant cash or non-cash resources, including... transparency is a critical element of effective public financial management, helps build market confidence, and sets the stage for economic sustainability. Transparency also provides a window into government budgets...

Explaining transparency in Public-Private Partnerships. Not so bad after all?

NARCIS (Netherlands)

Reynaers, A.; Grimmelikhuijsen, S

2015-01-01

Scholars' criticism of transparency in public-private partnerships (PPPs) often focuses on 'external' transparency, that is, the extent to which internal information is visible to the outside world. However, to achieve external transparency, internal transparency - the availability and inferability

Medical regulation, spectacular transparency and the blame business.

Science.gov (United States)

McGivern, Gerry; Fischer, Michael

2010-01-01

The purpose of this paper is to explore general practitioners' (GPs') and psychiatrists' views and experiences of transparent forms of medical regulation in practice, as well as those of medical regulators and those representing patients and professionals. The research included interviews with GPs, psychiatrists and others involved in medical regulation, representing patients and professionals. A qualitative narrative analysis of the interviews was then conducted. Narratives suggest rising levels of complaints, legalisation and blame within the National Health Service (NHS). Three key themes emerge. First, doctors feel "guilty until proven innocent" within increasingly legalised regulatory systems and are consequently practising more defensively. Second, regulation is described as providing "spectacular transparency", driven by political responses to high profile scandals rather than its effects in practice, which can be seen as a social defence. Finally, it is suggested that a "blame business" is driving this form of transparency, in which self-interested regulators, the media, lawyers, and even some patient organisations are fuelling transparency in a wider culture of blame. A relatively small number of people were interviewed, so further research testing the findings would be useful. Transparency has some perverse effects on doctors' practice. Rising levels of blame has perverse consequences for patient care, as doctors are practicing more defensively as a result, as well as significant financial implications for NHS funding. Transparent forms of regulation are assumed to be beneficial and yet little research has examined its effects in practice. In this paper we highlight a number of perverse effects of transparency in practice.

Public hearings as a transparency measure: The Valproate case

DEFF Research Database (Denmark)

Møllebæk, Mathias

2017-01-01

In line with increasing calls of transparency initiatives across European institutions, the European Medicines Agency (EMA) will on September 26th 2017 host its first public hearing on the regulatory of a drug, namely Valproate. According to the EMA website, the public hearing is intended...... to “increase transparency by opening up the scientific evaluation process” and “[give citizens] a voice in the evaluation of medicines.” This conference paper will present the preliminary results from a rhetorical analysis of the public hearing as a transparency measure. What kind transparency does a public...

Transparent face recognition in the home environment

NARCIS (Netherlands)

Beumer, G.M.; Veldhuis, Raymond N.J.; Bazen, A.M.

2004-01-01

The BASIS project is about the secure application of transparent biometrics in the home environment. Due to transparency and home-setting requirements there is variance in appearance of the subject. An other problem which needs attention is the extraction of features. The quality of the extracted

TRANSPARENCY IN ITALIAN NON PROFIT ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Patrizia Gazzola

2014-07-01

Full Text Available The aim of the paper is to evaluate the accountability and transparency of Italian non profits organizations. The main goal is to understand if a general accountability or transparency problem, or a systematic publicity deficit, exist in the third sector in Italy. Non profit organizations have an ethical obligation to their stakeholder and to the public to conduct their activities with accountability and transparency. Non profit organizations should regularly and openly convey information to the stakeholder about their vision, mission, objectives, activities, accomplishments, decision-making processes and organizational structure. Information from a non profit organization should be easily accessible to the stakeholder and should create external visibility, public understanding and trust in the organization, conditions necessary to find donors. Non profit organizations work with communities and community donors need to know how their money is used. In the first part the analysis of the definition of transparency and accountability is made and the sustainability report like an important instrument of communication is considered. In the second part an empirical research is presented. The Italian law allows taxpayers to devote 5 per thousand of their income tax to non profit organizations, choosing between charities, social promotion associations, recognized associations, entities dedicated to scientific research and health care, universities, municipal social services and other non profit organizations. The present study present a quantitative research and it’s based on an empirical analysis of non-profit organizations that receive this donation in Italy in the year 2010 and 2011. In the paper we analyze the transparency and the accountability of the top 100 non profit organizations that have received the contribution of 5 per thousand, checking whether they prepare their Sustainability Report or any other kind of report for communicate the use

Protective effect of transparent film dressing on proton therapy induced skin reactions

International Nuclear Information System (INIS)

Whaley, Jonathan T; Kirk, Maura; Cengel, Keith; McDonough, James; Bekelman, Justin; Christodouleas, John P

2013-01-01

Proton therapy can result in clinically significant radiation dermatitis. In some clinical scenarios, such as lung or breast cancer, the risk of severe radiation dermatitis may limit beam arrangement and prescription doses. Patients undergoing proton therapy for prostate cancer commonly develop mild radiation dermatitis. Herein, we report the outcomes of two prostate cancer patients whose radiation dermatitis appears to have been substantially diminished by transparent film dressings (Beekley stickers). This is a descriptive report of the skin toxicity observed in two patients undergoing proton therapy for prostate cancer at a single institution in 2011. A phantom dosimetric study was performed to evaluate the impact of a transparent film dressing on a beam’s spread out Bragg peak (SOBP). Two patients with low risk prostate cancer were treated with proton therapy to a total dose of 79.2Gy (RBE) in 1.8 Gy (RBE) fractions using two opposed lateral beams daily. Both patients had small circular (2.5 cm diameter) transparent adhesive markers placed on their skin to assist with daily alignment. Patient 1 had markers in place bilaterally for the entirety of treatment. Patient 2 had a marker in place for three weeks on one side and six weeks on the other. Over the course of therapy, both men developed typical Grade 1 radiation dermatitis (asymptomatic erythema) on their hips; however, in both patients, the erythema was substantially decreased beneath the markers. Patient 2 demonstrated less attenuation and thus greater erythema in the skin covered for three weeks compared to the skin covered for six weeks. The difference in skin changes between the covered and uncovered skin persisted for at least 1 month. A phantom study of double scattered beam SOBP with and without the marker in the beam path showed no gross dosimetric effect. Transparent adhesive markers appear to have attenuated radiation dermatitis in these two patients without affecting the SOBP. One patient may

[Transparency in public health decision-making].

Science.gov (United States)

García-Altés, Anna; Argimon, Josep M

2016-11-01

Improving the quality and transparency of governmental healthcare decision-making has an impact on the health of the population through policies, organisational management and clinical practice. Moreover, the comparison between healthcare centres and the transparent feedback of results to professionals and to the wider public contribute directly to improved results. The "Results Centre" of the Catalan healthcare system measures and disseminates the results achieved by the different healthcare centres in order to facilitate a shared decision-making process, thereby enhancing the quality of healthcare provided to the population of Catalonia (Spain). This is a pioneering initiative in Spain and is aligned with the most advanced countries in terms of policies of transparency and accountability. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Semantic transparency affects morphological priming . . . eventually.

Science.gov (United States)

Heyer, Vera; Kornishova, Dana

2018-05-01

Semantic transparency has been in the focus of psycholinguistic research for decades, with the controversy about the time course of the application of morpho-semantic information during the processing of morphologically complex words not yet resolved. This study reports two masked priming studies with English - ness and Russian - ost' nominalisations, investigating how semantic transparency modulates native speakers' morphological priming effects at short and long stimulus onset asynchronies (SOAs). In both languages, we found increased morphological priming for nominalisations at the transparent end of the scale (e.g. paleness - pale) in comparison to items at the opaque end of the scale (e.g. business - busy) but only at longer prime durations. The present findings are in line with models that posit an initial phase of morpho-orthographic (semantically blind) decomposition.

The velocity distribution caused by an airplane at the points of a vertical plane containing the span

Science.gov (United States)

Munk, Max M

1925-01-01

A formula for the computation of the vertical velocity component on all sides of an airplane is deduced and discussed. The formation is of value for the interpretation of such free flight tests where two airplanes fly alongside each other to facilitate observation.

Color transparency: Enchantment and effort

International Nuclear Information System (INIS)

Miller, G.A.

1991-01-01

A quantum mechanical approach is used to study high momentum transfer reactions in which a nucleon is knocked out of the nucleus. We show that the nuclear interactions of the wave packet produced in such a process tend to cancel, so that the nuclear medium becomes transparent. The wave packet (ejectile)-nucleon interactions, including the production of nucleon resonances are also discussed. Color transparency effects in the (e,e'p) reaction may be significant at relatively low momentum transfer Q 2 = 3 - 6 (GeV 2 /c) 2 . 17 refs., 3 figs

Transparent solar cell window module

Energy Technology Data Exchange (ETDEWEB)

Chau, Joseph Lik Hang; Chen, Ruei-Tang; Hwang, Gan-Lin; Tsai, Ping-Yuan [Nanopowder and Thin Film Technology Center, ITRI South, Industrial Technology Research Institute, Tainan County 709 (China); Lin, Chien-Chu [I-Lai Acrylic Corporation, Tainan City (China)

2010-03-15

A transparent solar cell window module based on the integration of traditional silicon solar cells and organic-inorganic nanocomposite material was designed and fabricated. The transparent solar cell window module was composed of a nanocomposite light-guide plate and traditional silicon solar cells. The preparation of the nanocomposite light-guide plate is easy without modification of the traditional casting process, the nanoparticles sol can be added directly to the polymethyl methacrylate (PMMA) monomer syrup during the process. The solar energy collected by this window can be used to power up small household electrical appliances. (author)

Development and applications of transparent conductive nanocellulose paper

Science.gov (United States)

Li, Shaohui; Lee, Pooi See

2017-12-01

Increasing attention has been paid to the next generation of 'green' electronic devices based on renewable nanocellulose, owing to its low roughness, good thermal stability and excellent optical properties. Various proof-of-concept transparent nanopaper-based electronic devices have been fabricated; these devices exhibit excellent flexibility, bendability and even foldability. In this review, we summarize the recent progress of transparent nanopaper that uses different types of nanocellulose, including pure nanocellulose paper and composite nanocellulose paper. The latest development of transparent and flexible nanopaper electronic devices are illustrated, such as electrochromic devices, touch sensors, solar cells and transistors. Finally, we discuss the advantages of transparent nanopaper compared to conventional flexible plastic substrate and the existing challenges to be tackled in order to realize this promising potential.

Development and applications of transparent conductive nanocellulose paper.

Science.gov (United States)

Li, Shaohui; Lee, Pooi See

2017-01-01

Increasing attention has been paid to the next generation of 'green' electronic devices based on renewable nanocellulose, owing to its low roughness, good thermal stability and excellent optical properties. Various proof-of-concept transparent nanopaper-based electronic devices have been fabricated; these devices exhibit excellent flexibility, bendability and even foldability. In this review, we summarize the recent progress of transparent nanopaper that uses different types of nanocellulose, including pure nanocellulose paper and composite nanocellulose paper. The latest development of transparent and flexible nanopaper electronic devices are illustrated, such as electrochromic devices, touch sensors, solar cells and transistors. Finally, we discuss the advantages of transparent nanopaper compared to conventional flexible plastic substrate and the existing challenges to be tackled in order to realize this promising potential.

EDITORIAL: On display with transparent conducting films On display with transparent conducting films

Science.gov (United States)

Demming, Anna

2012-03-01

Transparent conducting films were already featuring in scientific literature over one hundred years ago. In 1894 Aryton and Mather described a conducting varnish for coating the screens of electric apparatus so they would not charge when accidentally brushed by a coat sleeve or other material [1]. Their method began with a similar approach to that used to make savoury jellies; by dissolving gelatine in vinegar, after which less palatable ingredients were incorporated including sulphuric acid and an antisulphuric enamel. While the search for transparent conducting films continued to attract other researchers, the same problem remained: the transparency would be compromised if the film was too thick, and the conductivity would be compromised if the film was too thin. In the early 1950s Gillham and Preston reported that thin gold films sputtered on bismuth oxide and heated resulted in a material that successfully combined the previously mutually exclusive properties of transparency and conductivity [2]. Other oxide films were also found to favourably combine these properties, including tin oxide, as reported by Ishiguro and colleagues in Japan in 1958 [3]. Today tin oxide doped with indium (ITO) has become the industry standard for transparent conducting films in a range of applications including photovoltaic technology and displays. It is perhaps the mounting ubiquity of electronic displays as a result of the increasingly digitised and computerised environment of the modern day world that has begun to underline the main drawback of ITO: expense. In this issue, a collaboration of researchers in Korea present an overview of graphene as a transparent conducting material with the potential to replace ITO in a range of electronic and optoelectronic applications [4]. One of the first innovations in optical microscopy was the use of dyes. This principle first came into practice with the use of ultraviolet light to reveal previously indistinguishable features. As explained

Color transparency in semi-inclusive electroproduction of ρ mesons

International Nuclear Information System (INIS)

Frankfurt, L.; Miller, G. A.; Strikman, M.

2008-01-01

We study the electroproduction of ρ mesons in nuclei at intermediate energies, deriving a treatment of the energy lost by the ρ in each step of multiple scattering. This enables a close match between calculations and the experimental kinematic conditions. A standard Glauber calculation is presented, and then the effects of color-transparency are included. The influence of poor experimental resolution on the extracted transparency is assessed. The effects of ρ meson decay inside the nucleus are examined, and are typically about 5% at most. This effect disappears rapidly as Q 2 increases from about 1 to 3 GeV 2 , causing a rise in the transparency that is not attributable to color transparency. The size of color transparency effects for C and Fe nuclei is studied for values of Q 2 up to 10 GeV 2 . The detailed results depend strongly on the assumed value of the ρN cross section. The overall effects of color transparency are greater than about 10% for both nuclear targets if Q 2 is greater than about 5 GeV 2

A compact dilution refrigerator with vertical heat exchangers for operation to 2 mK

International Nuclear Information System (INIS)

Bunkov, Yu.M.; Guenault, A.M.; Hayward, D.J.; Jackson, D.A.; Kennedy, C.J.; Nichols, T.R.; Miller, I.E.; Pickett, G.R.; Ward, M.G.

1991-01-01

A compactly designed dilution refrigerator with closely packed, vertical heat exchangers is described. The refrigerator reaches a temperature of 2 mK and is easily constructed, since the sintered heat exchangers are straight units. Vibrating wire resonators are employed in the mixing chamber as diagnostic tools, which may act as both thermometers and phase-boundary level indicators. There is a design problem in the vertical arrangement, namely, the sumps on the concentrated phase side that can slowly fill with dilute phase and degrade the performance. The problem is solved by draining the superfluid 4 He component in any collected dilute phase through superleaks into the mixing chamber

The impact of packaging transparency on product attractiveness

Directory of Open Access Journals (Sweden)

Barbara Sabo

2017-12-01

Full Text Available The aim of the study was to investigate the impact of different levels of packaging transparency on the evaluation of attractiveness of a product within the packaging, in relation to whether it is a healthy or unhealthy product. Consumer preferences during buying decision process were also investigated. The study was conducted by two methods. The first one was related to consumer preferences and was based on a choice task, while the other one was related to packaging attractiveness and was based on subjective evaluation expressed through the Likert scale. Eight samples of packaging were used. They differed according to product type (healthy and unhealthy, and the level of transparency (fully transparent packaging, packaging with two windows, packaging with one window and non-transparent packaging. According to the results, consumers tend to ignore non-transparent packaging, regardless the product healthiness. The findings indicate the importance of thoughtful selection of packaging structure and its material in design process and launching the food products on the retail market.

Decreasing the Burden of Side Effects Through Positive Message Framing: an Experimental Proof-of-Concept Study.

Science.gov (United States)

Wilhelm, Marcel; Rief, Winfried; Doering, Bettina K

2018-05-21

Informing patients about treatment side effects increases the occurrence and intensity of side effects. Since the obligatory informed consent procedure in drug treatments requires transparency and nocebo research suggests that the informed consent of a drug leads to an increased occurrence of the mentioned side effects, the aim of this proof of concept study was to determine the effect of two different framings of informed consent on the occurrence, intensity, and perceived threat of side effects. Healthy male participants (n = 80) were randomized to one of two framing groups. The positive framing group was informed that the common side effect dizziness was a sign that the drug had started to work, while the neutral framing group was told that dizziness is an unpleasant but well-known side effect. Side effects were measured after the administration of metoprolol, an antihypertensive agent. Post hoc moderator analyses investigated the effect of pre-existing negative beliefs about the general harm of medication on the framing manipulation. Metoprolol-specific drug-attributed side effects were rated significantly less threatening in the positive framing group. The between-group effect size (Cohen's d) was small (d = 0.38, p = 0.049). Exploratory post hoc moderator analyses suggest that participants who believed that medication is a source of harmful effects benefited from positive framing, compared to neutral framing of drug-attributed side effects. Positive framing was partially effective in decreasing specific side effect measures, particularly among participants with a tendency to believe that medicine is harmful. Informed consent procedures should therefore be personalized, focusing on patients with negative treatment beliefs.

Transparent conducting oxides and production thereof

Science.gov (United States)

Gessert, Timothy A.; Yoshida, Yuki; Coutts, Timothy J.

2014-06-10

Transparent conducting oxides and production thereof are disclosed. An exemplary method of producing a transparent conducting oxide (TCO) material may comprise: providing a TCO target doped with either a high-permittivity oxide or a low-permittivity oxide in a process chamber. The method may also comprise depositing a metal oxide on the target in the process chamber to form a thin film having enhanced optical properties without substantially decreasing electrical quality.

Information transparency as paradigm of the economic systems sustaina ble development

Directory of Open Access Journals (Sweden)

L. Orlova

2015-01-01

Full Text Available Development of any economic system depends on a number of factors. This or that combination of factors, finally, defines innovation economy level. Realities of the modern world prove that the most successful is economic development of those countries which economy at all levels (micro- meso- macro- is focused on intellectual resources. Most an effective utilization of these resources probably only in the conditions of a transparency of acceptance of administrative decisions. From the economic point of view the information transparency should promote unpredictability decrease at acceptance of administrative decisions, to trust strengthening at all levels of economic system. The information transparency promotes formation and development of innovative economy, being a link between various economic subjects, acting as some limit of trust between them. The purpose of the article is consideration of information transparency as economic category. The identification of the different level economic subjects having interest in increase of information transparency, definition of the main methods of information transparency assessment; definition of need of information transparency increase are research problems of the article.Methodology. In conducting this study, the main sources of original data served as State statistical materials, the reports of The United Nations Department of Economic and Social Affairs, the reports of The European Commission. The basis of methodical developments based on the comparative method, scientific logic method, method of analysis and synthesis of the available data.Results. As well as any economic category is necessary for considering an information transparency at three levels of economic system: macromeso- and microlevel. The information transparency of macrolevel is a transparency of a state policy. An information transparency of mesolevel – a transparency of regions. At microlevel the information

Induced transparencies in metamaterial waveguides doped with quantum dots

International Nuclear Information System (INIS)

Singh, Mahi R; Brzozowski, Marek; Racknor, Chris

2015-01-01

The light-mater interaction in quantum dots doped artificial electromagnetic materials such as metamaterial waveguides has been studied. The effect of surface plasmon polaritons (SPPs) on the absorption coefficient of quantum dots in metamaterial waveguides is investigated. The waveguides are made by sandwiching a metamaterial slab between two dielectric material layers. An ensemble of quantum dots are deposited near the waveguide interfaces. The transfer matrix method is used to calculate the SSPs in the waveguide and the density matrix method and Schrödinger equation method are used to calculate the absorption spectrum. It is found that when the thickness of the metamaterial slab is greater than the SPP wavelength the SPP energy is degenerate. However when the thickness of the slab is smaller than that of the SPP wavelength the degeneracy of SPP state splits into odd and even SPP modes due the surface mode interaction (SMI) of the waveguide. We also found that the absorption spectrum has a minima (transparent state) which is due to strong coupling between excitons in quantum dots and SPPs in the waveguide. This transparent state is called the SPP induced transparency. However when the thickness of the slab is smaller than that of the SPP wavelength one transparent state in the absorption spectrum split into two transparent states due to the surface mode interaction. This type of transparency is called the SMI induced transparency. Transparent states can be achieved by applying pulse stress field or an intense laser pulse field. Hence present findings can be used to fabricate the metamaterial optical sensors and switches. (paper)

Transparency: the emerging third dimension of Open Science and Open Data

Directory of Open Access Journals (Sweden)

Liz Lyon

2016-03-01

Full Text Available This paper presents an exploration of the concept of research transparency. The policy context is described and situated within the broader arena of open science. This is followed by commentary on transparency within the research process, which includes a brief overview of the related concept of reproducibility and the associated elements of research integrity, fraud and retractions. A two-dimensional model or continuum of open science is considered and the paper builds on this foundation by presenting a three-dimensional model, which includes the additional axis of ‘transparency’. The concept is further unpacked and preliminary definitions of key terms are introduced: transparency, transparency action, transparency agent and transparency tool.  An important linkage is made to the research lifecycle as a setting for potential transparency interventions by libraries. Four areas are highlighted as foci for enhanced engagement with transparency goals: Leadership and Policy, Advocacy and Training, Research Infrastructures and Workforce Development.

The Vertical Profile of Ocean Mixing

Science.gov (United States)

Ferrari, R. M.; Nikurashin, M.; McDougall, T. J.; Mashayek, A.

2014-12-01

The upwelling of bottom waters through density surfaces in the deep ocean is not possible unless the sloping nature of the sea floor is taken into account. The bottom--intensified mixing arising from interaction of internal tides and geostrophic motions with bottom topography implies that mixing is a decreasing function of height in the deep ocean. This would further imply that the diapycnal motion in the deep ocean is downward, not upwards as is required by continuity. This conundrum regarding ocean mixing and upwelling in the deep ocean will be resolved by appealing to the fact that the ocean does not have vertical side walls. Implications of the conundrum for the representation of ocean mixing in climate models will be discussed.

Tunable phonon-induced transparency in bilayer graphene nanoribbons.

Science.gov (United States)

Yan, Hugen; Low, Tony; Guinea, Francisco; Xia, Fengnian; Avouris, Phaedon

2014-08-13

In the phenomenon of plasmon-induced transparency, which is a classical analogue of electromagnetically induced transparency (EIT) in atomic gases, the coherent interference between two plasmon modes results in an optical transparency window in a broad absorption spectrum. With the requirement of contrasting lifetimes, typically one of the plasmon modes involved is a dark mode that has limited coupling to the electromagnetic radiation and possesses relatively longer lifetime. Plasmon-induced transparency not only leads to light transmission at otherwise opaque frequency regions but also results in the slowing of light group velocity and enhanced optical nonlinearity. In this article, we report an analogous behavior, denoted as phonon-induced transparency (PIT), in AB-stacked bilayer graphene nanoribbons. Here, light absorption due to the plasmon excitation is suppressed in a narrow window due to the coupling with the infrared active Γ-point optical phonon, whose function here is similar to that of the dark plasmon mode in the plasmon-induced transparency. We further show that PIT in bilayer graphene is actively tunable by electrostatic gating and estimate a maximum slow light factor of around 500 at the phonon frequency of 1580 cm(-1), based on the measured spectra. Our demonstration opens an avenue for the exploration of few-photon nonlinear optics and slow light in this novel two-dimensional material.

Transparent, Flexible, Conformal Capacitive Pressure Sensors with Nanoparticles.

Science.gov (United States)

Kim, Hyeohn; Kim, Gwangmook; Kim, Taehoon; Lee, Sangwoo; Kang, Donyoung; Hwang, Min-Soo; Chae, Youngcheol; Kang, Shinill; Lee, Hyungsuk; Park, Hong-Gyu; Shim, Wooyoung

2018-02-01

The fundamental challenge in designing transparent pressure sensors is the ideal combination of high optical transparency and high pressure sensitivity. Satisfying these competing demands is commonly achieved by a compromise between the transparency and usage of a patterned dielectric surface, which increases pressure sensitivity, but decreases transparency. Herein, a design strategy for fabricating high-transparency and high-sensitivity capacitive pressure sensors is proposed, which relies on the multiple states of nanoparticle dispersity resulting in enhanced surface roughness and light transmittance. We utilize two nanoparticle dispersion states on a surface: (i) homogeneous dispersion, where each nanoparticle (≈500 nm) with a size comparable to the visible light wavelength has low light scattering; and (ii) heterogeneous dispersion, where aggregated nanoparticles form a micrometer-sized feature, increasing pressure sensitivity. This approach is experimentally verified using a nanoparticle-dispersed polymer composite, which has high pressure sensitivity (1.0 kPa -1 ), and demonstrates excellent transparency (>95%). We demonstrate that the integration of nanoparticle-dispersed capacitor elements into an array readily yields a real-time pressure monitoring application and a fully functional touch device capable of acting as a pressure sensor-based input device, thereby opening up new avenues to establish processing techniques that are effective on the nanoscale yet applicable to macroscopic processing. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Double optomechanical transparency with direct mechanical interaction

International Nuclear Information System (INIS)

Li Ling-Chao; Shi Rao; Xu Jun; Hu Xiang-Ming

2015-01-01

We present a mechanism for double transparency in an optomechanical system. This mechanism is based on the coupling of a moving cavity mirror to a second mechanical oscillator. Due to the purely mechanical coupling and the radiation pressure, three pathways are established for excitations of the probe photons into the cavity photons. Destructive interference occurs at two different frequencies, leading to double transparency to the probe field. It is the coupling strength between the mechanical oscillators that determines the locations of the transparency windows. Moreover, the normal splitting appears for the generated Stokes field and the four-wave mixing process is inhibited on resonance. (paper)

Study a possibility of saffron (Crocus sativus L. production in vertical culture

Directory of Open Access Journals (Sweden)

Lorin ali ahmad

2017-06-01

Full Text Available In recent years many research studies have been carried out to use a vertical planting system for production of some plants. Although saffron is one of the most expensive spices in the word, there is no investigation about saffron production in a vertical planting system. Therefore, the growth and production of saffron plant in two different systems (vertical and horizontal were studied in the agricultural research field of the Tarbiat Modares University during the 2013-2014 growing seasons. In the vertical system, saffron corms were planted in fabric bags containing potting soil. The fabric bags were hanged on a cube of metal with an area of each side of the cube being equal to 2.25 square meters. In the horizontal system, the corms were planted in three plots with the area of each plots being 2.25 square meters. The results showed that in the vertical planting system, the number of flowers, flower dry weight and dry weight of stigma per unit area of land (10 flower, 347.34 and 0.56 mg respectively were significantly higher than those obtained in the horizontal culture (They were almost three times higher .In contrast, the numbers and dry weight of lateral corms (2.4 corm and 0.36 g respectively and the dry weight of apical corm (0.88 g in the horizontal system were significantly greater than those obtained in the vertical system. Dry weight of leaf and root were significantly greater in the vertical system. The total number of buds and leaves were more in the horizontal culture. However, the maximum leaf length of the vertical planting system was higher than those of the horizontal system.

Diamond-shaped electromagnetic transparent devices with homogeneous material parameters

International Nuclear Information System (INIS)

Li Tinghua; Huang Ming; Yang Jingjing; Yu Jiang; Lan Yaozhong

2011-01-01

Based on the linear coordinate transformation method, two-dimensional and three-dimensional electromagnetic transparent devices with diamond shape composed of homogeneous and non-singular materials are proposed in this paper. The permittivity and permeability tensors of the transparent devices are derived. The performance and scattering properties of the transparent devices are confirmed by a full-wave simulation. It can physically protect electric devices such as an antenna and a radar station inside, without sacrificing their performance. This work represents important progress towards the practical realization of metamaterial-assisted transparent devices and expands the application of transformation optics.

2009 Annual Health Physics Report for the HEU Transparency Program

International Nuclear Information System (INIS)

Radev, R.

2010-01-01

During the 2009 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. LLNL also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2009, there were 159 person-trips that required dose monitoring of the U.S. monitors. Of the 159 person-trips, 149 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 4 monitoring visits by TMO monitors to facilities other than UEIE and 10 to UEIE itself. LLNL's Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2009, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency Program now has over fifteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.

Transparency and Its Determinants at Colombian Universities

Science.gov (United States)

Flórez-Parra, Jesús Mauricio; López-Pérez, María Victoria; López-Hernández, Antonio Manuel

2017-01-01

Over the past decade, one of the demands upon public institutions, among which we find universities, has been for transparency and improvement of accountability. In this context, Colombian universities are introducing different methods of management and governance aimed at addressing the demands of society generally in relation to transparency and…

Basic self-knowledge and transparency.

Science.gov (United States)

Borgoni, Cristina

2018-01-01

Cogito -like judgments, a term coined by Burge (1988), comprise thoughts such as, I am now thinking , I [hereby] judge that Los Angeles is at the same latitude as North Africa, or I [hereby] intend to go to the opera tonight. It is widely accepted that we form cogito -like judgments in an authoritative and not merely empirical manner. We have privileged self-knowledge of the mental state that is self-ascribed in a cogito -like judgment. Thus, models of self-knowledge that aim to explain privileged self-knowledge should have the resources to explain the special self-knowledge involved in cogito judgments. My objective in this paper is to examine whether a transparency model of self-knowledge (i.e., models based on Evans ' 1982 remarks) can provide such an explanation: granted that cogito judgments are paradigmatic cases of privileged self-knowledge, does the transparency procedure explain why this is so? The paper advances a negative answer, arguing that the transparency procedure cannot generate the type of thought constitutive of cogito judgments.

Surface topography acquisition method for double-sided near-right-angle structured surfaces based on dual-probe wavelength scanning interferometry.

Science.gov (United States)

Zhang, Tao; Gao, Feng; Jiang, Xiangqian

2017-10-02

This paper proposes an approach to measure double-sided near-right-angle structured surfaces based on dual-probe wavelength scanning interferometry (DPWSI). The principle and mathematical model is discussed and the measurement system is calibrated with a combination of standard step-height samples for both probes vertical calibrations and a specially designed calibration artefact for building up the space coordinate relationship of the dual-probe measurement system. The topography of the specially designed artefact is acquired by combining the measurement results with white light scanning interferometer (WLSI) and scanning electron microscope (SEM) for reference. The relative location of the two probes is then determined with 3D registration algorithm. Experimental validation of the approach is provided and the results show that the method is able to measure double-sided near-right-angle structured surfaces with nanometer vertical resolution and micrometer lateral resolution.

Measuring of vertical stroke Vub vertical stroke in the forthcoming decade

International Nuclear Information System (INIS)

Kim, C.S.

1997-01-01

I first introduce the importance of measuring V ub precisely. Then, from a theoretician's point of view, I review (a) past history, (b) present trials, and (c) possible future alternatives on measuring vertical stroke V ub vertical stroke and/or vertical stroke V ub /V cb vertical stroke. As of my main topic, I introduce a model-independent method, which predicts Γ(B→X u lν)/Γ(B→X c lν)≡(γ u /γ c ) x vertical stroke V ub /V cb vertical stroke 2 ≅(1.83±0.28) x vertical stroke V ub /V cb vertical stroke 2 and vertical stroke V ub /V cb vertical stroke ≡(γ c /γ u ) 1/2 x [B(B→X u lν)/B(B→ X c lν]) 1/2 ≅(0.74±0.06) x [B(B→X u lν/)B(B→X c lν)] 1/2 , based on the heavy quark effective theory I also explore the possible experimental options to separate B→X u lν from the dominant B→X c lν: the measurement of inclusive hadronic invariant mass distributions, and the 'D-π' (and 'K-π') separation conditions I also clarify the relevant experimental backgrounds. (orig.)

Development and applications of transparent conductive nanocellulose paper

Science.gov (United States)

Li, Shaohui; Lee, Pooi See

2017-01-01

Abstract Increasing attention has been paid to the next generation of ‘green’ electronic devices based on renewable nanocellulose, owing to its low roughness, good thermal stability and excellent optical properties. Various proof-of-concept transparent nanopaper-based electronic devices have been fabricated; these devices exhibit excellent flexibility, bendability and even foldability. In this review, we summarize the recent progress of transparent nanopaper that uses different types of nanocellulose, including pure nanocellulose paper and composite nanocellulose paper. The latest development of transparent and flexible nanopaper electronic devices are illustrated, such as electrochromic devices, touch sensors, solar cells and transistors. Finally, we discuss the advantages of transparent nanopaper compared to conventional flexible plastic substrate and the existing challenges to be tackled in order to realize this promising potential. PMID:28970870

Radical Transparency in Journalism: Digital Evolutions from Historical Precedents

Directory of Open Access Journals (Sweden)

Luke Justin Heemsbergen

2013-06-01

Full Text Available This paper argues that transparency projects retain a political hue from the social-technological context from which they are created. Thus, radical transparency is considered as an opportunity to evolve both journalistic and democratic practices. Transparency in practice reveals diverse expectations of how journalists reporting should be used, and these expectations in turn, seem dependent on specific worldviews. This paper presents a comparative analysis of the effects of the current exemplar of radical journalism, WikiLeaks. It compares Wikileaks to its historical equivalents, including Hansard in the 18th century, and the reporting of open diplomacy in the early 20th century. This analysis shows how journalism evolves along with radical transparency projects, and how the current context of networked radical transparency can, and will, be made into news with specific political effects. In conclusion, this paper argues that practitioners should be aware of the political hues that new transparency mechanisms afford. Being cognizant of context and design choices can increase the degree to which new initiatives can have a deep systemic impact—as well as acknowledge the qualities and repercussions of that impact.

Pitfalls in looking for color transparency at intermediate energies

International Nuclear Information System (INIS)

Frankfurt, L.L.; Strikman, M.I.; Zhalov, M.B.

1994-01-01

The problems and uncertainties in the search for color transparency at intermediate Q 2 are considered. We show that conventional (optical) model [distorted wave impulse approximation (DWIA)] predicts a substantial change of the transparency, T, with Q 2 in the kinematics of the Ne-18 (e,e ' p) experiment, while the color transparency phenomenon may lead to nearly Q 2 independent T. In the case of A(p,2p) reaction we demonstrate that the conventional optical model describes well the 1 GeV A(p,2p) data but not the transparency observed at higher energies. We find also that DWIA (with or without color transparency) predicts strong dependence of T on the momentum of the struck nucleon which is consistent with the pattern of the Brookhaven National Laboratory A(p,2p) data at p N =6 GeV/c and 10 GeV/c

Transparency in the ePortfolio Creation Process

Science.gov (United States)

Jones, Stephanie A.; Downs, Elizabeth; Jenkins, Stephen J.

2015-01-01

This paper presents the findings of a study examining the effect of transparency on the ePortfolio creation process. The purpose of the study was to examine whether increased awareness of other students' ePortfolios through the implementation of transparency and peer review would positively affect the quality of performance of school library media…

Stereological estimation of surface area and barrier thickness of fish gills in vertical sections.

Science.gov (United States)

Da Costa, Oscar T F; Pedretti, Ana Carolina E; Schmitz, Anke; Perry, Steven F; Fernandes, Marisa N

2007-01-01

Previous morphometric methods for estimation of the volume of components, surface area and thickness of the diffusion barrier in fish gills have taken advantage of the highly ordered structure of these organs for sampling and surface area estimations, whereas the thickness of the diffusion barrier has been measured orthogonally on perpendicularly sectioned material at subjectively selected sites. Although intuitively logical, these procedures do not have a demonstrated mathematical basis, do not involve random sampling and measurement techniques, and are not applicable to the gills of all fish. The present stereological methods apply the principles of surface area estimation in vertical uniform random sections to the gills of the Brazilian teleost Arapaima gigas. The tissue was taken from the entire gill apparatus of the right-hand or left-hand side (selected at random) of the fish by systematic random sampling and embedded in glycol methacrylate for light microscopy. Arches from the other side were embedded in Epoxy resin. Reference volume was estimated by the Cavalieri method in the same vertical sections that were used for surface density and volume density measurements. The harmonic mean barrier thickness of the water-blood diffusion barrier was calculated from measurements taken along randomly selected orientation lines that were sine-weighted relative to the vertical axis. The values thus obtained for the anatomical diffusion factor (surface area divided by barrier thickness) compare favourably with those obtained for other sluggish fish using existing methods.

Transparent conducting oxide nanotubes

Science.gov (United States)

Alivov, Yahya; Singh, Vivek; Ding, Yuchen; Nagpal, Prashant

2014-09-01

Thin film or porous membranes made of hollow, transparent, conducting oxide (TCO) nanotubes, with high chemical stability, functionalized surfaces and large surface areas, can provide an excellent platform for a wide variety of nanostructured photovoltaic, photodetector, photoelectrochemical and photocatalytic devices. While large-bandgap oxide semiconductors offer transparency for incident light (below their nominal bandgap), their low carrier concentration and poor conductivity makes them unsuitable for charge conduction. Moreover, materials with high conductivity have nominally low bandgaps and hence poor light transmittance. Here, we demonstrate thin films and membranes made from TiO2 nanotubes heavily-doped with shallow Niobium (Nb) donors (up to 10%, without phase segregation), using a modified electrochemical anodization process, to fabricate transparent conducting hollow nanotubes. Temperature dependent current-voltage characteristics revealed that TiO2 TCO nanotubes, doped with 10% Nb, show metal-like behavior with resistivity decreasing from 6.5 × 10-4 Ωcm at T = 300 K (compared to 6.5 × 10-1 Ωcm for nominally undoped nanotubes) to 2.2 × 10-4 Ωcm at T = 20 K. Optical properties, studied by reflectance measurements, showed light transmittance up to 90%, within wavelength range 400 nm-1000 nm. Nb doping also improves the field emission properties of TCO nanotubes demonstrating an order of magnitude increase in field-emitter current, compared to undoped samples.

Printable Transparent Conductive Films for Flexible Electronics.

Science.gov (United States)

Li, Dongdong; Lai, Wen-Yong; Zhang, Yi-Zhou; Huang, Wei

2018-03-01

Printed electronics are an important enabling technology for the development of low-cost, large-area, and flexible optoelectronic devices. Transparent conductive films (TCFs) made from solution-processable transparent conductive materials, such as metal nanoparticles/nanowires, carbon nanotubes, graphene, and conductive polymers, can simultaneously exhibit high mechanical flexibility, low cost, and better photoelectric properties compared to the commonly used sputtered indium-tin-oxide-based TCFs, and are thus receiving great attention. This Review summarizes recent advances of large-area flexible TCFs enabled by several roll-to-roll-compatible printed techniques including inkjet printing, screen printing, offset printing, and gravure printing using the emerging transparent conductive materials. The preparation of TCFs including ink formulation, substrate treatment, patterning, and postprocessing, and their potential applications in solar cells, organic light-emitting diodes, and touch panels are discussed in detail. The rational combination of a variety of printed techniques with emerging transparent conductive materials is believed to extend the opportunities for the development of printed electronics within the realm of flexible electronics and beyond. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Novel Smart Windows Based on Transparent Phosphorescent OLEDs

Energy Technology Data Exchange (ETDEWEB)

Brian D' Andrade; Stephen Forest

2006-09-15

In this program, Universal Display Corporation (UDC) and Princeton University developed the use of white transparent phosphorescent organic light emitting devices (PHOLEDs{trademark}) to make low-cost ''transparent OLED (TOLED) smart windows'', that switch rapidly from being a highly efficient solid-state light source to being a transparent window. PHOLEDs are ideal for large area devices, and the UDC-Princeton team has demonstrated white PHOLEDs with efficiencies of >24 lm/W at a luminance of 1,000 cd/m{sup 2}. TOLEDs have transparencies >70% over the visible wavelengths of light, but their transparency drops to less than 5% for wavelengths shorter than 350 nm, so they can also be used as ultraviolet (UV) light filters. In addition to controlling the flow of UV radiation, TOLEDs coupled with an electromechanical or electrically activated reflecting shutter on a glass window can be employed to control the flow of heat from infrared (IR) radiation by varying the reflectance/transparency of the glass for wavelengths greater than 800nm. One particularly attractive shutter technology is reversible electrochromic mirrors (REM). Our goal was therefore to integrate two innovative concepts to meet the U.S. Department of Energy goals: high power efficiency TOLEDs, plus electrically controlled reflectors to produce a ''smart window''. Our efforts during this one year program have succeeded in producing a prototype smart window shown in the Fig. I, below. The four states of the smart window are pictured: reflective with lamp on, reflective with lamp off, transparent with lamp on, and transparent with lamp off. In the transparent states, the image is an outdoor setting viewed through the window. In the reflective states, the image is an indoor setting viewed via reflection off the window. We believe that the integration of our high efficiency white phosphorescent TOLED illumination source, with electrically activated shutters represents

Criterion-free measurement of motion transparency perception at different speeds

Science.gov (United States)

Rocchi, Francesca; Ledgeway, Timothy; Webb, Ben S.

2018-01-01

Transparency perception often occurs when objects within the visual scene partially occlude each other or move at the same time, at different velocities across the same spatial region. Although transparent motion perception has been extensively studied, we still do not understand how the distribution of velocities within a visual scene contribute to transparent perception. Here we use a novel psychophysical procedure to characterize the distribution of velocities in a scene that give rise to transparent motion perception. To prevent participants from adopting a subjective decision criterion when discriminating transparent motion, we used an “odd-one-out,” three-alternative forced-choice procedure. Two intervals contained the standard—a random-dot-kinematogram with dot speeds or directions sampled from a uniform distribution. The other interval contained the comparison—speeds or directions sampled from a distribution with the same range as the standard, but with a notch of different widths removed. Our results suggest that transparent motion perception is driven primarily by relatively slow speeds, and does not emerge when only very fast speeds are present within a visual scene. Transparent perception of moving surfaces is modulated by stimulus-based characteristics, such as the separation between the means of the overlapping distributions or the range of speeds presented within an image. Our work illustrates the utility of using objective, forced-choice methods to reveal the mechanisms underlying motion transparency perception. PMID:29614154

Transparent Ceramic Scintillator Fabrication, Properties and Applications

International Nuclear Information System (INIS)

Cherepy, N.J.; Kuntz, J.D.; Roberts, J.J.; Hurst, T.A.; Drury, O.B.; Sanner, R.D.; Tillotson, T.M.; Payne, S.A.

2008-01-01

Transparent ceramics offer an alternative to single crystals for scintillator applications such as gamma ray spectroscopy and radiography. We have developed a versatile, scaleable fabrication method, using Flame Spray Pyrolysis (FSP) to produce feedstock which is readily converted into phase-pure transparent ceramics. We measure integral light yields in excess of 80,000 Ph/MeV with Cerium-doped Garnets, and excellent optical quality. Avalanche photodiode readout of Garnets provides resolution near 6%. For radiography applications, Lutetium Oxide offers a high performance metric and is formable by ceramics processing. Scatter in transparent ceramics due to secondary phases is the principal limitation to optical quality, and afterglow issues that affect the scintillation performance are presently being addressed

Transparent Solar Concentrator for Flat Panel Display

Science.gov (United States)

Yeh, Chia-Hung; Chang, Fuh-Yu; Young, Hong-Tsu; Hsieh, Tsung-Yen; Chang, Chia-Hsiung

2012-06-01

A new concept of the transparent solar concentrator for flat panel display is experimentally demonstrated without adversely affecting the visual effects. The solar concentrator is based on a solar light-guide plate with micro prisms, not only increasing the absorption area of solar energy but also enhancing the conversion efficiency. The incident light is guided by the designed solar light-guide plate according to the total internal reflection (TIR), and converted into electrical power by photovoltaic solar cells. The designed transparent solar concentrator was made and measured with high transparency, namely 94.8%. The developed solar energy system for display can store energy and supply the bias voltage to light on two light-emitting diodes (LEDs) successfully.

Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

International Nuclear Information System (INIS)

Fan, Ren-Hao; Peng, Ru-Wen; Huang, Xian-Rong; Wang, Mu

2015-01-01

In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertz ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies. - Highlights: • Making structured metals transparent for ultrabroadband electromagnetic waves. • Non-resonant excitation of surface plasmons or spoof surface plasmons. • Sonic artificially metallic structures transparent for broadband acoustic waves

Making structured metals transparent for ultrabroadband electromagnetic waves and acoustic waves

Energy Technology Data Exchange (ETDEWEB)

Fan, Ren-Hao [National Laboratory of Solid State Microstructures and School of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China); Peng, Ru-Wen, E-mail: rwpeng@nju.edu.cn [National Laboratory of Solid State Microstructures and School of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China); Huang, Xian-Rong [Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States); Wang, Mu [National Laboratory of Solid State Microstructures and School of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China)

2015-07-15

In this review, we present our recent work on making structured metals transparent for broadband electromagnetic waves and acoustic waves via excitation of surface waves. First, we theoretically show that one-dimensional metallic gratings can become transparent and completely antireflective for extremely broadband electromagnetic waves by relying on surface plasmons or spoof surface plasmons. Second, we experimentally demonstrate that metallic gratings with narrow slits are highly transparent for broadband terahertz waves at oblique incidence and high transmission efficiency is insensitive to the metal thickness. Further, we significantly develop oblique metal gratings transparent for broadband electromagnetic waves (including optical waves and terahertz ones) under normal incidence. In the third, we find the principles of broadband transparency for structured metals can be extended from one-dimensional metallic gratings to two-dimensional cases. Moreover, similar phenomena are found in sonic artificially metallic structures, which present the transparency for broadband acoustic waves. These investigations provide guidelines to develop many novel materials and devices, such as transparent conducting panels, antireflective solar cells, and other broadband metamaterials and stealth technologies. - Highlights: • Making structured metals transparent for ultrabroadband electromagnetic waves. • Non-resonant excitation of surface plasmons or spoof surface plasmons. • Sonic artificially metallic structures transparent for broadband acoustic waves.

2011 Annual Health Physics Report for the HEU transparency Program

International Nuclear Information System (INIS)

Radev, R.

2012-01-01

During the 2008 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. They also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2008, there were 158 person-trips that required dose monitoring of the U.S. monitors. Of the 158 person-trips, 148 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 6 monitoring visits by TMO monitors to facilities other than UEIE and 8 to UEIE itself. There were three monitoring visits (source changes) that were back-to-back with a total of 24 monitors. LLNL's Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2008, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency now has thirteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.

AZO-Ag-AZO transparent electrode for amorphous silicon solar cells

International Nuclear Information System (INIS)

Theuring, Martin; Vehse, Martin; Maydell, Karsten von; Agert, Carsten

2014-01-01

Metal-based transparent electrodes can be fabricated at low temperatures, which is crucial for various substrate materials and solar cells. In this work, an oxide-metal-oxide (OMO) transparent electrode based on aluminum zinc oxide (AZO) and silver is compared to AZO layers, fabricated at different temperatures and indium tin oxides. With the OMO structure, a sheet resistance of 7.1/square and a transparency above 80% for almost the entire visible spectrum were achieved. The possible application of such electrodes on a textured solar cell was demonstrated on the example of a rough ZnO substrate. An OMO structure is benchmarked in a n-i-p amorphous silicon solar cell against an AZO front contact fabricated at 200 °C. In the experiment, the OMO electrode shows a superior performance with an efficiency gain of 30%. - Highlights: • Multilayer transparent electrode based on aluminum zinc oxide (AZO) and Ag • Comparison of AZO-Ag-AZO transparent electrode to AZO and indium tin oxide • Performance of AZO-Ag-AZO transparent electrodes on textured surfaces • Comparison of amorphous silicon solar cells with different transparent electrodes

Trade, Transparency, and Welfare in the Asia Pacific

Directory of Open Access Journals (Sweden)

Kazutomo Abe

2008-12-01

Full Text Available This paper examines the impact of reducing corruption and improving transparency to lower trade costs in the Asia Pacific Economic Cooperation region. The authors find, based on a computable general equilibrium model, significant potential trade and welfare gains for Asia Pacific Economic Cooperation members, with increased transparency and lower levels of corruption. Results suggest that trade in the region would increase by 11 percent and global welfare would expand by USD 406 billion by raising transparency to the average in the region. Most of the increase in welfare would take place in member economies undertaking reform. Among the reformers, the gross domestic product (GDP of Vietnam, Thailand, Russia, and the Philippines would increase by approximately 20 percent. The benefits to Malaysia and China would also be substantial with increased transparency and lower levels of corruption.

Transparency demonstration of underground radiation and environmental monitoring

International Nuclear Information System (INIS)

Schoeneman, Barry D.; Hofer, Dennis

2000-01-01

One of the legacies of the nuclear weapon and nuclear power cycles has been the generation of large quantities of nuclear waste and fissile materials. As citizens of this planet, it is everyone's responsibility to provide for safe, secure, transparent, disposal of these waste nuclear materials. The Sandia Cooperative Monitoring Center sponsored a Transparency Monitoring Workshop where the use of the Waste Isolation Pilot Plant (WIPP) was identified as a possible transparency demonstration test bed. Three experiments were conceived as jumpstart activities to showcase the effective use of the WIPP infrastructure as a Transparency Demonstration Test Bed. The three experiments were successfully completed and demonstrated at the International Atomic Energy Association sponsored International Conference on Geological Repositories held in Denver Colorado November 1999. The design and coordination of these efforts is the subject of this paper

Business Reporting: How Transparency becomes a Justification Mechanism

DEFF Research Database (Denmark)

Nielsen, Christian

2004-01-01

through linking disclosure to value creation is emphasized. As transparency is in the eye of the beholder, the process of developing corporate reporting practices must be concerned with reaching a common understanding and agreement between producers and consumers of such disclosures. Transparency...... is perceived as both a key objective and outcome of comprehensive business reporting. However, the concept of transparency seems to be an empty concept merely constituting a justification mechanism for actual behaviour, i.e. that disclosure instead is driven by the signalling value for the individual company...

Non-homogeneous model for a side heated square cavity filled with a nanofluid

International Nuclear Information System (INIS)

Celli, Michele

2013-01-01

Highlights: • A side heated two dimensional square cavity filled with a nanofluid is studied. • A non-homogeneous model is taken into account. • The properties of the nanofluid are functions of the fraction of nanoparticles. • Low-Rayleigh numbers yield a non-homogeneous distribution of the nanoparticles. -- Abstract: A side heated two dimensional square cavity filled with a nanofluid is here studied. The side heating condition is obtained by imposing two different uniform temperatures at the vertical boundary walls. The horizontal walls are assumed to be adiabatic and all boundaries are assumed to be impermeable to the base fluid and to the nanoparticles. In order to study the behavior of the nanofluid, a non-homogeneous model is taken into account. The thermophysical properties of the nanofluid are assumed to be functions of the average volume fraction of nanoparticles dispersed inside the cavity. The definitions of the nondimensional governing parameters (Rayleigh number, Prandtl number and Lewis number) are exactly the same as for the clear fluids. The distribution of the nanoparticles shows a particular sensitivity to the low Rayleigh numbers. The average Nusselt number at the vertical walls is sensitive to the average volume fraction of the nanoparticles dispersed inside the cavity and it is also sensitive to the definition of the thermophysical properties of the nanofluid. Highly viscous base fluids lead to a critical behavior of the model when the simulation is performed in pure conduction regime. The solution of the problem is obtained numerically by means of a Galerkin finite element method

The minimal access deep plane extended vertical facelift.

Science.gov (United States)

Jacono, Andrew A; Parikh, Sachin S

2011-11-01

Modern facelift techniques have benefited from a "repopularization" of shorter incisions, limited skin elevation, and more limited dissection of the superficial musculoaponeurotic system (SMAS) and platysma in order to shorten postoperative recovery times and reduce surgical risks for patients. The authors describe their minimal access deep plane extended (MADE) vertical vector facelift, which is a hybrid technique combining the optimal features of the deep plane facelift and the short scar, minimal access cranial suspension (MACS) lift. The authors retrospectively reviewed the case records of 181 patients who underwent facelift procedures performed by the senior author (AAJ) during a two year period between March 2008 and March 2010. Of those patients, 153 underwent facelifting with the MADE vertical technique. With this technique, deep plane dissection releases the zygomatico-cutaneous ligaments, allowing for more significant vertical motion of the midface and jawline during suspension. Extended platysmal dissection was utilized with a lateral platysmal myotomy, which is not traditionally included in a deep plane facelift. The lateral platysmal myotomy allowed for separation of the vertical vector of suspension in the midface and jawline from the superolateral vector of suspension that is required for neck rejuvenation, obviating the need for additional anterior platysmal surgery. The average age of the patients was 57.8 years. The average length of follow-up was 12.7 months. In 69 consecutive patients from this series, average vertical skin excision measured 3.02 cm on each side of the face at the junction of the pre auricular and temporal hair tuft incision (resulting in a total excision of 6.04 cm of skin). Data from the entire series revealed a revision rate of 3.9%, a hematoma rate of 1.9%, and a temporary facial nerve injury rate of 1.3%. The common goal of all facelifting procedures is to provide a long-lasting, natural, balanced, rejuvenated aesthetic

Color transparency study group

International Nuclear Information System (INIS)

Appel, J.A.; Pordes, S.; Botts, J.; Bunce, G.; Farrar, G.

1990-01-01

The group studied the relatively new notion of color transparency, discussed present experimental evidence for the effect, and explored several ideas for future experiments. This write-up summarizes these discussions. 11 refs., 1 fig

Nuclear waste repository transparency technology test bed demonstrations at WIPP

International Nuclear Information System (INIS)

Betsill J, David; Elkins, Ned Z.; Wu, Chuan-Fu; Mewhinney, James D.; Aamodt, Paul

2000-01-01

Secretary of Energy, Bill Richardson, has stated that one of the nuclear waste legacy issues is ''The challenge of managing the fuel cycle's back end and assuring the safe use of nuclear power.'' Waste management (i.e., the back end) is a domestic and international issue that must be addressed. A key tool in gaining acceptance of nuclear waste repository technologies is transparency. Transparency provides information to outside parties for independent assessment of safety, security, and legitimate use of materials. Transparency is a combination of technologies and processes that apply to all elements of the development, operation, and closure of a repository system. A test bed for nuclear repository transparency technologies has been proposed to develop a broad-based set of concepts and strategies for transparency monitoring of nuclear materials at the back end of the fuel/weapons cycle. WIPP is the world's first complete geologic repository system for nuclear materials at the back end of the cycle. While it is understood that WIPP does not currently require this type of transparency, this repository has been proposed as realistic demonstration site to generate and test ideas, methods, and technologies about what transparency may entail at the back end of the nuclear materials cycle, and which could be applicable to other international repository developments. An integrated set of transparency demonstrations was developed and deployed during the summer, and fall of 1999 as a proof-of-concept of the repository transparency technology concept. These demonstrations also provided valuable experience and insight into the implementation of future transparency technology development and application. These demonstrations included: Container Monitoring Rocky Flats to WIPP; Underground Container Monitoring; Real-Time Radiation and Environmental Monitoring; Integrated level of confidence in the system and information provided. As the world's only operating deep geologic

Vertical axis wind rotors: Status and potential. [energy conversion efficiency and aerodynamic characteristics

Science.gov (United States)

Vance, W.

1973-01-01

The design and application of a vertical axis wind rotor is reported that operates as a two stage turbine wherein the wind impinging on the concave side is circulated through the center of the rotor to the back of the convex side, thus decreasing what might otherwise be a high negative pressure region. Successful applications of this wind rotor to water pumps, ship propulsion, and building ventilators are reported. Also shown is the feasibility of using the energy in ocean waves to drive the rotor. An analysis of the impact of rotor aspect ratio on rotor acceleration shows that the amount of venting between rotor vanes has a very significant effect on rotor speed for a given wind speed.

Four Reference Models for Transparency Requirements in Information Systems

OpenAIRE

Hosseini, Mahmoud; Shahri, Alimohammad; Phalp, Keith T.; Ali, Ra

2017-01-01

Transparency is a key emerging requirement in modern businesses and their information systems. Transparency refers to the information which flows amongst stakeholders for the purpose of informed decision-making and taking the right action. Transparency is generally associated with positive connotations such as trust and accountability. However, it has been shown that it could have adverse effects such as information overload and affecting decisions objectiveness. This calls for systematic app...

Does Corporate Governance or Transparency Affect Foreign Direct Investment?

OpenAIRE

Haksoon Kim

2010-01-01

The paper investigates the relationship between the foreign direct investment (FDI) and the corporate governance or transparency by investigating the country-level FDI flows, FDI inward performance, corporate governance and transparency variables. From the regression analysis with Newey-West estimator of 28 country panel data from 1990- 2002, we find strong positive relationships between corporate governance or transparency level of hosting countries and FDI inward performance within hosting ...

Common Practices of Transparency in the Nuclear Regulatory Organizations

International Nuclear Information System (INIS)

Lee, Chang Ju; Hah, Yeon Hee; Oh, Kju Myeng

2010-01-01

Along with greater access to information, particularly through the Internet, there is the increasing demand of the public for transparency, particularly in matters and decisions affecting their lives. The public demands to know more about Nuclear Regulatory Organization's (NROs) and their activities resulting in more interactions with the public to help make nuclear safety activities more understandable and transparent. As a general concept, 'transparency' means literally that something can be seen through. The definition tells us that it is, more actively, to provide the public with factual information about our activities, and to respond promptly to 'the public's right to know' about the information acquired by NROs. NROs around the world recognize the importance of openness and transparency to the success of their programs to protect public health and safety. All agree that good practice in transparency and being proactive with information help to protect against perceptions of secrecy and to instil public confidence and accountability in what they do. On the other hand, NROs face many challenges in their quest to be open and transparent with their stakeholders. government, nuclear operators, NGOs, media, our colleagues, and particularly with the general public. The most frequently identified challenge was striking the right balance between openness and security-related considerations with many responders citing the need to protect proprietary information whilst still accommodating the public's desire to be well informed. Other challenges include deciding how much transparency is needed to satisfy the public and how information, that is often highly technical and complex, can be presented in a meaningful way through the use of clear and simple language. In this paper, we summarize the survey results done by WGPC on relevant practices of NRO's flux of work concerning public communication matters. By comprehensively searching the international status, we may have

Measurements of the Characteristics of Transparent Material Using Digital Holography

Directory of Open Access Journals (Sweden)

Ding Yu

2013-01-01

Full Text Available Digital holography is applied to measure the characteristics of transparent material. A digital hologram recording system to measure the surface of transparent material was established, and the digital holograms of transparent object were obtained in high quality. For postprocessing of hologram, the least-squares phase unwrapping algorithm was used in phase unwrapping, and the phase reconstruction image of transparent object was obtained. The information of material surfaces was measured and the characteristic was presented in 3D visualization. The validation experiment was conducted by NanoMap 500LS system; the results of validation experiment are well satisfied with the measurement by digital holography, which proved the feasibility of digital holographic technology as a good measurement tool for transparent material.

The Parameters Affect on Power Coefficient Vertical Axis Wind Turbine

Directory of Open Access Journals (Sweden)

Ahmed Y. Qasim

2012-04-01

Full Text Available ABSTRACT: This study describes the design of a special type of vertical axis rotor wind turbine with moveable vertically positioned vanes. The novel design increases the torque in the left side of the wind turbine by increasing the drag coefficient. It also reduces the negative torque of the frame which rotates contrary to the wind in the other side. Two different types of models, having different vane shapes (flat vane and cavity shaped vane, were fabricated. Each type consisted of two models with varying number of frames (three and four frames. The models were tested in a wind tunnel with variable wind speed in order to understand the effect of shape, weight, and number of frames on the power coefficient of the wind turbine. ABSTRAK: Di dalam kajian ini, rotor turbin angin berpaksi vertikel sebagai rangka khusus telah direkabentuk dengan lokasi vertikel mudahalih oleh bilah kipas. Rekabentuk ini meningkatkan tork di bahagian kiri turbin angin dengan meningkatkan pekali seretan dan mengurangkan tork negatif rangka yang berputar berlawanan dengan angin pada bahagian lain. Dua jenis model berbentuk berlainan telah difabrikasi (bilah kipas rata dan bilah kipas berbentuk kaviti, dengan setiap jenis mempunyai dua model dengan bilangan rangka yang berlainan (berangka tiga dan berangka empat. Model-model telah diuji di dalam terowong angin dengan kelajuan angin yang berbeza bagi mendapatkan kesan rekabentuk, berat dan bilangan rangka ke atas pekali kuasa.KEYWORDS: design; wind turbine; drag coefficient; vane

Plasmon-Induced Transparency Based on Triple Arc-Ring Resonators

Directory of Open Access Journals (Sweden)

Guang-Xi Dong

2018-06-01

Full Text Available This paper presents a plasmon-induced transparency (PIT using an easy-fabricating metamaterial composed of three pieces of metallic arc-rings on top of a dielectric substrate. The transmission of the transparent peak of 1.32 THz reaches approximately 93%. The utilization of the coupled Lorentzian oscillator model and the distribution of electromagnetic fields together explain the cause of the transparent peak. The simulation results further demonstrate that the bandwidth of the transmission peak can be narrowed by changing the sizes of the arc-rings. Moreover, an on/off effect based on the transparent peak is discussed by introducing photosensitive silicon into the air gaps of the suggested metamaterial structure.

P -type transparent conducting oxides

International Nuclear Information System (INIS)

Zhang, Kelvin H L; Xi, Kai; Blamire, Mark G; Egdell, Russell G

2016-01-01

Transparent conducting oxides constitute a unique class of materials combining properties of electrical conductivity and optical transparency in a single material. They are needed for a wide range of applications including solar cells, flat panel displays, touch screens, light emitting diodes and transparent electronics. Most of the commercially available TCOs are n -type, such as Sn doped In 2 O 3 , Al doped ZnO, and F doped SnO 2 . However, the development of efficient p -type TCOs remains an outstanding challenge. This challenge is thought to be due to the localized nature of the O 2 p derived valence band which leads to difficulty in introducing shallow acceptors and large hole effective masses. In 1997 Hosono and co-workers (1997 Nature 389 939) proposed the concept of ‘chemical modulation of the valence band’ to mitigate this problem using hybridization of O 2 p orbitals with close-shell Cu 3 d 10 orbitals. This work has sparked tremendous interest in designing p -TCO materials together with deep understanding the underlying materials physics. In this article, we will provide a comprehensive review on traditional and recently emergent p -TCOs, including Cu + -based delafossites, layered oxychalcogenides, nd 6 spinel oxides, Cr 3+ -based oxides (3 d 3 ) and post-transition metal oxides with lone pair state (ns 2 ). We will focus our discussions on the basic materials physics of these materials in terms of electronic structures, doping and defect properties for p -type conductivity and optical properties. Device applications based on p -TCOs for transparent p – n junctions will also be briefly discussed. (topical review)

Ultrasmooth, extremely deformable and shape recoverable Ag nanowire embedded transparent electrode.

Science.gov (United States)

Nam, Sanggil; Song, Myungkwan; Kim, Dong-Ho; Cho, Byungjin; Lee, Hye Moon; Kwon, Jung-Dae; Park, Sung-Gyu; Nam, Kee-Seok; Jeong, Yongsoo; Kwon, Se-Hun; Park, Yun Chang; Jin, Sung-Ho; Kang, Jae-Wook; Jo, Sungjin; Kim, Chang Su

2014-04-25

Transparent electrodes have been widely used in electronic devices such as solar cells, displays, and touch screens. Highly flexible transparent electrodes are especially desired for the development of next generation flexible electronic devices. Although indium tin oxide (ITO) is the most commonly used material for the fabrication of transparent electrodes, its brittleness and growing cost limit its utility for flexible electronic devices. Therefore, the need for new transparent conductive materials with superior mechanical properties is clear and urgent. Ag nanowire (AgNW) has been attracting increasing attention because of its effective combination of electrical and optical properties. However, it still suffers from several drawbacks, including large surface roughness, instability against oxidation and moisture, and poor adhesion to substrates. These issues need to be addressed before wide spread use of metallic NW as transparent electrodes can be realized. In this study, we demonstrated the fabrication of a flexible transparent electrode with superior mechanical, electrical and optical properties by embedding a AgNW film into a transparent polymer matrix. This technique can produce electrodes with an ultrasmooth and extremely deformable transparent electrode that have sheet resistance and transmittance comparable to those of an ITO electrode.

A Fully Transparent Resistive Memory for Harsh Environments

KAUST Repository

Yang, Po-Kang; Ho, Chih-Hsiang; Lien, Der-Hsien; Duran Retamal, Jose Ramon; Kang, Chen-Fang; Chen, Kuan-Ming; Huang, Teng-Han; Yu, Yueh-Chung; Wu, Chih-I; He, Jr-Hau

2015-01-01

A fully transparent resistive memory (TRRAM) based on Hafnium oxide (HfO2) with excellent transparency, resistive switching capability, and environmental stability is demonstrated. The retention time measured at 85 °C is over 3 × 104 sec

Hydrogen-terminated diamond vertical-type metal oxide semiconductor field-effect transistors with a trench gate

Energy Technology Data Exchange (ETDEWEB)

Inaba, Masafumi, E-mail: inaba-ma@ruri.waseda.jp; Muta, Tsubasa; Kobayashi, Mikinori; Saito, Toshiki; Shibata, Masanobu; Matsumura, Daisuke; Kudo, Takuya; Hiraiwa, Atsushi [Graduate School of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku, Tokyo 169-8555 (Japan); Kawarada, Hiroshi [Graduate School of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku, Tokyo 169-8555 (Japan); Kagami Memorial Laboratory for Materials Science and Technology, Waseda University, 2-8-26 Nishiwaseda, Shinjuku, Tokyo 169-0051 (Japan)

2016-07-18

The hydrogen-terminated diamond surface (C-H diamond) has a two-dimensional hole gas (2DHG) layer independent of the crystal orientation. A 2DHG layer is ubiquitously formed on the C-H diamond surface covered by atomic-layer-deposited-Al{sub 2}O{sub 3}. Using Al{sub 2}O{sub 3} as a gate oxide, C-H diamond metal oxide semiconductor field-effect transistors (MOSFETs) operate in a trench gate structure where the diamond side-wall acts as a channel. MOSFETs with a side-wall channel exhibit equivalent performance to the lateral C-H diamond MOSFET without a side-wall channel. Here, a vertical-type MOSFET with a drain on the bottom is demonstrated in diamond with channel current modulation by the gate and pinch off.

Vertical pellet injection in FTU discharges

International Nuclear Information System (INIS)

Giovannozzi, E.; Annibaldi, S.V.; Buratti, P.

2005-01-01

Central fuelling and pellet enhanced performance modes have been obtained with pellets injected vertically from the high field side on the FTU tokamak. Four phases have been recognized: ablation of the pellets, drifting plasmoids, MHD modes which take the density to the centre of the discharge and finally an anomalous drift which further increases the density peaking. Pellet ablation data have been compared with values from a pellet ablation and deposition code. Comparison between 0.8 and 1.1 MA discharges at a high magnetic field (B T = 7 T) has been carried out: a higher performance has been obtained with the latter due to the higher target density and the larger inversion radius which would increase the effects of m = 1 modes to take the density to the plasma centre

STS-95 Discovery undergoes vertical lift in the VAB

Science.gov (United States)

1998-01-01

In the Vehicle Assembly Building, the orbiter Discovery (viewed from below the Space Shuttle Main Engines, starboard side) is raised to a vertical position in order to be mated with the external tank. The orbiter displays the recently painted NASA logo, termed the 'meatball,' on the aft fuselage. The logo also has been painted on the left, or port, wing. Discovery (OV-103), the first of the orbiters to be launched with the new art work, is scheduled for its 25th flight, from Launch Pad 39B, on Oct. 29, 1998, for the STS-95 mission.

Resistive Switching of Ta2O5-Based Self-Rectifying Vertical-Type Resistive Switching Memory

Science.gov (United States)

Ryu, Sungyeon; Kim, Seong Keun; Choi, Byung Joon

2018-01-01

To efficiently increase the capacity of resistive switching random-access memory (RRAM) while maintaining the same area, a vertical structure similar to a vertical NAND flash structure is needed. In addition, the sneak-path current through the half-selected neighboring memory cell should be mitigated by integrating a selector device with each RRAM cell. In this study, an integrated vertical-type RRAM cell and selector device was fabricated and characterized. Ta2O5 as the switching layer and TaOxNy as the selector layer were used to preliminarily study the feasibility of such an integrated device. To make the side contact of the bottom electrode with active layers, a thick Al2O3 insulating layer was placed between the Pt bottom electrode and the Ta2O5/TaOxNy stacks. Resistive switching phenomena were observed under relatively low currents (below 10 μA) in this vertical-type RRAM device. The TaOxNy layer acted as a nonlinear resistor with moderate nonlinearity. Its low-resistance-state and high-resistance-state were well retained up to 1000 s.

Federal Funding Accountability and Transparency Act frequently asked questions

Science.gov (United States)

One stop shop for Federal Funding Accountability and Transparency Act (FFATA) questions. This frequently asked document will assist with Federal Funding Accountability and Transparency Act (FFATA) related questions.

Utilisation of transparent synthetic soil surrogates in geotechnical physical models: A review

Directory of Open Access Journals (Sweden)

Abideen Adekunle Ganiyu

2016-08-01

Full Text Available Efforts to obtain non-intrusive measurement of deformations and spatial flow within soil mass prior to the advent of transparent soils have perceptible limitations. The transparent soil is a two-phase medium composed of both the synthetic aggregate and fluid components of identical refractive indices aiming at attaining transparency of the resulting soil. The transparency facilitates real life visualisation of soil continuum in physical models. When applied in conjunction with advanced photogrammetry and image processing techniques, transparent soils enable the quantification of the spatial deformation, displacement and multi-phase flow in physical model tests. Transparent synthetic soils have been successfully employed in geotechnical model tests as soil surrogates based on the testing results of their geotechnical properties which replicate those of natural soils. This paper presents a review on transparent synthetic soils and their numerous applications in geotechnical physical models. The properties of the aggregate materials are outlined and the features of the various transparent clays and sands available in the literature are described. The merits of transparent soil are highlighted and the need to amplify its application in geotechnical physical model researches is emphasised. This paper will serve as a concise compendium on the subject of transparent soils for future researchers in this field.

Complicating Methodological Transparency

Science.gov (United States)

Bridges-Rhoads, Sarah; Van Cleave, Jessica; Hughes, Hilary E.

2016-01-01

A historical indicator of the quality, validity, and rigor of qualitative research has been the documentation and disclosure of the behind-the-scenes work of the researcher. In this paper, we use what we call "methodological data" as a tool to complicate the possibility and desirability of such transparency. Specifically, we draw on our…

A Dictionary for Transparency

Energy Technology Data Exchange (ETDEWEB)

Kouzes, Richard T.

2001-11-15

There are many terms that are used in association with the U.S. Defense Threat Reduction Agency (DTRA) Transparency Project associated with the Mayak Fissile Materials Storage Facility. This is a collection of proposed definitions of these terms.

A reinterpretation of transparency perception in terms of gamut relativity.

Science.gov (United States)

Vladusich, Tony

2013-03-01

Classical approaches to transparency perception assume that transparency constitutes a perceptual dimension corresponding to the physical dimension of transmittance. Here I present an alternative theory, termed gamut relativity, that naturally explains key aspects of transparency perception. Rather than being computed as values along a perceptual dimension corresponding to transmittance, gamut relativity postulates that transparency is built directly into the fabric of the visual system's representation of surface color. The theory, originally developed to explain properties of brightness and lightness perception, proposes how the relativity of the achromatic color gamut in a perceptual blackness-whiteness space underlies the representation of foreground and background surface layers. Whereas brightness and lightness perception were previously reanalyzed in terms of the relativity of the achromatic color gamut with respect to illumination level, transparency perception is here reinterpreted in terms of relativity with respect to physical transmittance. The relativity of the achromatic color gamut thus emerges as a fundamental computational principle underlying surface perception. A duality theorem relates the definition of transparency provided in gamut relativity with the classical definition underlying the physical blending models of computer graphics.

Measurement of vertical stroke Vub vertical stroke using b hadron semileptonic decay

International Nuclear Information System (INIS)

Abbiendi, G.; Aakesson, P.F.

2001-01-01

The magnitude of the CKM matrix element vertical stroke V ub vertical stroke is determined by measuring the inclusive charmless semileptonic branching fraction of beauty hadrons at OPAL based on b → X u lν event topology and kinematics. This analysis uses OPAL data collected between 1991 and 1995, which correspond to about four million hadronic Z decays. We measure Br(b → X u lν) to be (1.63 ±0.53 +0.55 -0.62 ) x 10 -3 . The first uncertainty is the statistical error and the second is the systematic error. From this analysis, vertical stroke V ub vertical stroke is determined to be: vertical stroke V ub vertical stroke =(4.00±0.65(stat) +0.67 -0.76 (sys)±0.19(HQE)) x 10 -3 . The last error represents the theoretical uncertainties related to the extraction of vertical stroke V ub vertical stroke from Br(b→X u l ν) using the Heavy Quark Expansion. (orig.)

Semi-transparent perovskite solar cells for tandems with silicon and CIGS

KAUST Repository

Bailie, Colin D.; Christoforo, M. Greyson; Mailoa, Jonathan P.; Bowring, Andrea R.; Unger, Eva L.; Nguyen, William H.; Burschka, Julian; Pellet, Norman; Lee, Jungwoo Z.; Grä tzel, Michael; Noufi, Rommel; Buonassisi, Tonio; Salleo, Alberto; McGehee, Michael D.

2015-01-01

solar cell. We use a transparent silver nanowire electrode on perovskite solar cells to achieve a semi-transparent device. We place the semi-transparent cell in a mechanically-stacked tandem configuration onto copper indium gallium diselenide (CIGS

New transparent conductive metal based on polymer composite

Energy Technology Data Exchange (ETDEWEB)

Keshavarz Hedayati, Mehdi; Jamali, Mohammad [Nanochemistry and Nanoengineering, Institute for Materials Science, Faculty of Engineering, Christian-Albrechts-University, Kiel (Germany); Strunkus, Thomas; Zaporochentko, Vladimir; Faupel, Franz [Multicomponent Materials, Institute for Materials Science, Faculty of Engineering, Christian-Albrechts-University, Kiel (Germany); Elbahri, Mady [Nanochemistry and Nanoengineering, Institute for Materials Science, Faculty of Engineering, Christian-Albrechts-University, Kiel (Germany); Helmholtz-Zentrum Geesthacht GmbH, Institute of Polymer Research, Nanochemistry and Nanoengineering (Germany)

2011-07-01

Currently great efforts are made to develop new kind of transparent conductors (TCs) to replace ITO. In this regard different materials and composites have been proposed and studied including conductive polymers, carbon nanotubes (CNTs), metal grids, and random networks of metallic nanowires. But so far none of them could be used as a replacing material, since either they are either fragile and brittle or their electrical conductivity is below the typical ITO. Thin metallic films due to their high electrical conductivity could be one of the best replacing materials for ITO, however their poor transparency makes their application as TCs limited. Here we design and fabricate a new polymeric composite coating which enhances the transparency of the thin metal film up to 100% relative to the initial value while having a high electrical conductivity of typical metals. Therefore our proposed device has a great potential to be used as new transparent conductor.

Nuclear Transparency in Large Momentum Transfer Quasielastic Scattering

International Nuclear Information System (INIS)

Mardor, I.; Aclander, J.; Alster, J.; Kosonovsky, E.; Mardor, Y.; Navon, I.; Piasetzky, E.; Durrant, S.; Barton, D.; Bunce, G.; Carroll, A.; Gushue, S.; Makdisi, Y.; Roser, T.; Tanaka, M.; Christensen, N.; Courant, H.; Marshak, M.; White, C.; Heppelmann, S.; Minor, E.D.; Wu, J.; Nicholson, H.; Sutton, C.S.; Russell, J.

1998-01-01

We measured simultaneously pp elastic and quasielastic (p,2p) scattering in hydrogen, deuterium, and carbon for momentum transfers of 4.8 to 6.2 (GeV/c) 2 at incoming momenta of 5.9 and 7.5 GeV/c and center-of-mass scattering angles in the range θ c.m. =83.7 degree - 90 degree . The nuclear transparency is defined as the ratio of the quasielastic cross section to the free pp cross section. At incoming momentum of 5.9 GeV/c , the transparency of carbon decreases by a factor of 2 from θ c.m. ≅85 degree to θ c.m. ≅89 degree . At the largest angle the transparency of carbon increases from 5.9 to 7.5 GeV/c by more than 50%. The transparency in deuterium does not depend on incoming momentum nor on θ c.m. . copyright 1998 The American Physical Society

Toward Transparency : New Approaches and Their Application to Financial Markets

OpenAIRE

Vishwanath, Tara; Kaufmann, Daniel

2001-01-01

The Asian financial crisis in the late 1990s not only highlighted the welfare consequences of transparency in the financial sector but also linked this relatively narrow problem to the broader context of transparency in governance. It has been observed that objections to transparency, often on flimsy pretexts, are common even in industrialized countries. This article argues that transparen...

78 FR 57409 - U.S. Extractive Industries Transparency Initiative Public Outreach

Science.gov (United States)

2013-09-18

.... Extractive Industries Transparency Initiative Public Outreach AGENCY: Office of the Secretary, Interior... Industries Transparency Initiative (USEITI) candidacy application. By this notice, Interior is providing the...' commitment to participate in the Extractive Industries Transparency Initiative. EITI is a signature...

Water transparency drives intra-population divergence in Eurasian Perch (Perca fluviatilis).

Science.gov (United States)

Bartels, Pia; Hirsch, Philipp E; Svanbäck, Richard; Eklöv, Peter

2012-01-01

Trait combinations that lead to a higher efficiency in resource utilization are important drivers of divergent natural selection and adaptive radiation. However, variation in environmental features might constrain foraging in complex ways and therefore impede the exploitation of critical resources. We tested the effect of water transparency on intra-population divergence in morphology of Eurasian perch (Perca fluviatilis) across seven lakes in central Sweden. Morphological divergence between near-shore littoral and open-water pelagic perch substantially increased with increasing water transparency. Reliance on littoral resources increased strongly with increasing water transparency in littoral populations, whereas littoral reliance was not affected by water transparency in pelagic populations. Despite the similar reliance on pelagic resources in pelagic populations along the water transparency gradient, the utilization of particular pelagic prey items differed with variation in water transparency in pelagic populations. Pelagic perch utilized cladocerans in lakes with high water transparency and copepods in lakes with low water transparency. We suggest that under impaired visual conditions low utilization of littoral resources by littoral perch and utilization of evasive copepods by pelagic perch may lead to changes in morphology. Our findings indicate that visual conditions can affect population divergence in predator populations through their effects on resource utilization.

Transparency or spectral narrowing for two-mode squeezing and entanglement

International Nuclear Information System (INIS)

Hu Xiangming; Oh, C. H.

2011-01-01

We analyze the nonadiabatic effects on the propagation of a two-mode squeezed field inside a medium of three-level Λ atoms that display the dark resonance. We identify the different effects for the two-mode quantum properties: (i) unconditional transparency for the sum squeezing and (ii) induced transparency or spectral narrowing for the difference squeezing depending on the relative widths of the initial correlation spectrum to the transparency window. These effects combine to induce transparency or spectrum narrowing for the bipartite entanglement. The potential applications range from quantum information to laser spectroscopy and frequency standards.

Thigh muscle activity, knee motion, and impact force during side-step pivoting in agility-trained female basketball players.

Science.gov (United States)

Wilderman, Danielle R; Ross, Scott E; Padua, Darin A

2009-01-01

Improving neuromuscular control of hamstrings muscles might have implications for decreasing anterior cruciate ligament injuries in females. To examine the effects of a 6-week agility training program on quadriceps and hamstrings muscle activation, knee flexion angles, and peak vertical ground reaction force. Prospective, randomized clinical research trial. Sports medicine research laboratory. Thirty female intramural basketball players with no history of knee injury (age = 21.07 +/- 2.82 years, height = 171.27 +/- 4.66 cm, mass = 66.36 +/- 7.41 kg). Participants were assigned to an agility training group or a control group that did not participate in agility training. Participants in the agility training group trained 4 times per week for 6 weeks. We used surface electromyography to assess muscle activation for the rectus femoris, vastus medialis oblique, medial hamstrings, and lateral hamstrings for 50 milliseconds before initial ground contact and while the foot was in contact with the ground during a side-step pivot maneuver. Knee flexion angles (at initial ground contact, maximum knee flexion, knee flexion displacement) and peak vertical ground reaction force also were assessed during this maneuver. Participants in the training group increased medial hamstrings activation during ground contact after the 6-week agility training program. Both groups decreased their vastus medialis oblique muscle activation during ground contact. Knee flexion angles and peak vertical ground reaction force did not change for either group. Agility training improved medial hamstrings activity in female intramural basketball players during a side-step pivot maneuver. Agility training that improves hamstrings activity might have implications for reducing anterior cruciate ligament sprain injury associated with side-step pivots.

Transparency and surveillance as sociotechnical accountability a house of mirrors

CERN Document Server

Johnson, Deborah G

2014-01-01

Surveillance and transparency are both significant and increasingly pervasive activities in neoliberal societies. Surveillance is taken up as a means to achieving security and efficiency; transparency is seen as a mechanism for ensuring compliance or promoting informed consumerism and informed citizenship. Indeed, transparency is often seen as the antidote to the threats and fears of surveillance. This book adopts a novel approach in examining surveillance practices and transparency practices together as parallel systems of accountability. It presents the house of mirrors as a new framework for understanding surveillance and transparency practices instrumented with information technology. The volume centers around five case studies: Campaign Finance Disclosure, Secure Flight, American Red Cross, Google, and Facebook. A series of themed chapters draw on the material and provide cross-case analysis. The volume ends with a chapter on policy implications.

Measuring and slowing decoherence in Electromagnetically induced transparency medium

International Nuclear Information System (INIS)

Shuker, M.; Firstenberg, O.; Sagi, Y.; Ben-Kish, A.; Fisher, A.; Ron, A.; Davidson, N.

2005-01-01

Full Text:Electromagnetically induced transparency is a unique light-matter interaction that exhibits extremely narrow-band spectroscopic features along with low absorption. Recent interest in this phenomenon is driven by its possible applications in quantum information (slow light, storage of light), atomic clocks and precise magnetometers. The Electromagnetically induced transparency phenomenon takes place when an atomic ensemble is driven to a coherent superposition of its ground state sub-levels by two phase-coherent radiation fields. A key parameter of the Electromagnetically induced transparency medium, that limits its applicability, is the coherence lifetime of this superposition (decoherence rate). We have developed a simple technique to measure decay rates within the ground state of an atomic ensemble, and specifically the decoherence rate of the Electromagnetically induced transparency coherent superposition. Detailed measurements were performed in a Rubidium vapor cell at 60 - 80 with 30 Torr of Neon buffer gas. We have found that the Electromagnetically induced transparency decoherence is dominated by spin-exchange collisions between Rubidium atoms. We discuss the sensitivity of various quantum states of the atomic ensemble to spin exchange decoherence, and find a set of quantum states that minimize this effect. Finally, we demonstrate a unique quantum state which is both insensitive to spin exchange decoherence and constitutes an Electromagnetically induced transparency state of the medium

The Mediated Transparent Society

DEFF Research Database (Denmark)

Backer, Lise

2001-01-01

in the mediated transparent society. The paper concludes that, based on these analyses, the mediated panopticism working on the business segment is not an effective disciplinary apparatus, which can guarantee that business corporations are carrying out important ecological or ethical improvements....

Transparent conducting oxide top contacts for organic electronics

KAUST Repository

Franklin, Joseph B.

2014-01-01

A versatile method for the deposition of transparent conducting oxide (TCO) layers directly onto conjugated polymer thin film substrates is presented. Using pulsed laser deposition (PLD) we identify a narrow window of growth conditions that permit the deposition of highly transparent, low sheet resistance aluminium-doped zinc oxide (AZO) without degradation of the polymer film. Deposition on conjugated polymers mandates the use of low growth temperatures (<200°C), here we deposit AZO onto poly-3-hexylthiophene (P3HT) thin films at 150°C, and investigate the microstructural and electrical properties of the AZO as the oxygen pressure in the PLD chamber is varied (5-75 mTorr). The low oxygen pressure conditions previously optimized for AZO deposition on rigid substrates are shown to be unsuitable, resulting in catastrophic damage of the polymer films. By increasing the oxygen pressure, thus reducing the energy of the ablated species, we identify conditions that allow direct deposition of continuous, transparent AZO films without P3HT degradation. We find that uptake of oxygen into the AZO films reduces the intrinsic charge carriers and AZO films with a measured sheet resistance of approximately 500 Ω □-1 can be prepared. To significantly reduce this value we identify a novel process in which AZO is deposited over a range of oxygen pressures-enabling the deposition of highly transparent AZO with sheet resistances below 50 Ω □-1 directly onto P3HT. We propose these low resistivity films are widely applicable as transparent top-contacts in a range of optoelectronic devices and highlight this by demonstrating the operation of a semi-transparent photovoltaic device. © 2014 The Royal Society of Chemistry. 2014.

Aircraft Lighting and Transparency Lab

Data.gov (United States)

Federal Laboratory Consortium — The Advanced Lighting and Transparencies with Night Combat Lab performs radiometric and photometric measurements of cockpit lighting and displays. Evaluates the day,...

Customer satisfaction: The role of transparency

DEFF Research Database (Denmark)

Eskildsen, Jacob Kjær; Kristensen, Kai

2007-01-01

& Westlund, 2003) as well as the structure of the framework (Eskildsen et al., 2004). We know however very little about how the structure of the individual markets with respect to, for instance, how the transparency of products and services affects customer satisfaction. The aim of this article is to analyze...... the effect of the transparency of products and services on customer satisfaction with respect to Danish mobile phone companies, banks and supermarkets from 2004 based on the authors' experiences from the various analyses conducted within the EPSI rating initiative....

Nuclear transparencies from photoinduced pion production

Energy Technology Data Exchange (ETDEWEB)

W. Cosyn; M.C. Martinez; J. Ryckebusch; B. Van Overmeire

2006-12-01

We present a relativistic and cross-section factorized framework for computing nuclear transparencies extracted from A({gamma}, {pi} N) reactions at intermediate energies. The proposed quantum mechanical model adopts a relativistic extension to the multiple-scattering Glauber approximation to account for the final state interactions of the ejected nucleon and pion. The theoretical predictions are compared against the experimental {sup 4}He({gamma},p {pi}{sup -}) data from Jefferson Lab. For those data, our results show no conclusive evidence for the onset of mechanisms related to color transparency.

Fabrication of transparent ceramics using nanoparticles

Science.gov (United States)

Cherepy, Nerine J; Tillotson, Thomas M; Kuntz, Joshua D; Payne, Stephen A

2012-09-18

A method of fabrication of a transparent ceramic using nanoparticles synthesized via organic acid complexation-combustion includes providing metal salts, dissolving said metal salts to produce an aqueous salt solution, adding an organic chelating agent to produce a complexed-metal sol, heating said complexed-metal sol to produce a gel, drying said gel to produce a powder, combusting said powder to produce nano-particles, calcining said nano-particles to produce oxide nano-particles, forming said oxide nano-particles into a green body, and sintering said green body to produce the transparent ceramic.

Digital Thickness Measurement of a Transparent Plastic Orthodontic Device

Science.gov (United States)

Kim, Yoon-Hwan; Rhim, Sung-Han

2018-05-01

A transparent orthodontic device is used to move the teeth to the final calibration position to form a proper set of teeth. Because the uniform thickness of the device plays an important role in tooth positioning, the accuracy of the device's thickness profile is important for effective orthodontic treatment. However, due to the complexity of the device's geometry and the transparency of the device's material, measuring the complete thickness profile has been difficult. In the present study, a new optical scanning method to measure the thickness profile of transparent plastic orthodontic devices is proposed and evaluated by using scanning electron microscopy (SEM). The error of the new measurement method is less than ±18 μm. The new method can be used to measure the thickness of non-specific, multi-curved, transparent orthodontic devices.

Transparent Hydrophobic Coating by Sol Gel Method

International Nuclear Information System (INIS)

Mohd Hamzah Harun; Nik Ghazali Nik Salleh; Mahathir Mohamed; Mohd Sofian Alias

2016-01-01

Transparent hydrophobic coating of inorganic based tetra orthosilicate (TEOS) was prepared by sol gel method by varying fluoroalkylsilane (FAS) content which works as hydrophobic agent. Surface contact angle, transmittance degree and surface morphology were characterized for each sample. All samples show good transparency which was confirmed by UV visible spectroscopy. The hydrophobicity obtained increases with FAS content indicates that FAS is best candidate to induce hydrophobicity for inorganic coating. (author)

Synthetic Jets Flow Control on a vertical stabilizer

Science.gov (United States)

Rathay, Nicholas; Boucher, Matthew; Amitay, Michael

2011-11-01

The vertical stabilizer on most commercial transport aircraft is much larger than required for stability and control. The tail is significantly oversized in order to maintain controllability in the event of asymmetric engine failure and meet flying qualities requirements related to dynamic motion. Using aerodynamic flow control techniques, it may be possible to reduce the size of the tail while maintaining similar control authority during inclement flight conditions. Reducing the size of the tail decreases the weight and the drag of the airplane, which results in considerable savings in fuel costs. In this work, it is shown that synthetic jet (zero-net-mass-flux) actuators are capable of reattaching the separated flow on the rudder and augmenting the performance of the stabilizer. Experiments were conducted in an open-return wind tunnel on a 1/25th scale model of a vertical stabilizer and a partial fuselage section. The surface pressure, aerodynamic loads and data acquired with a Stereo PIV system were used to investigate the effectiveness of this technology as well as provide a more detailed analysis of the flowfield and showed that the synthetic jets are capable of augmenting the side-force by up to 20%.

Transparent conductors based on microscale/nanoscale materials for high performance devices

Science.gov (United States)

Gao, Tongchuan

Transparent conductors are important as the top electrode for a variety of optoelectronic devices, including solar cells, light-emitting diodes (LEDs), at panel displays, and touch screens. Doped indium tin oxide (ITO) thin films are the predominant transparent conductor material. However, ITO thin films are brittle, making them unsuitable for the emerging flexible devices, and suffer from high material and processing cost. In my thesis, we developed a variety of transparent conductors toward a performance comparable with or superior to ITO thin films, with lower cost and potential for scalable manufacturing. Metal nanomesh (NM), hierarchical graphene/metal microgrid (MG), and hierarchical metal NM/MG materials were investigated. Simulation methods were used as a powerful tool to predict the transparency and sheet resistance of the transparent conductors by solving Maxwell's equations and Poisson's equation. Affordable and scalable fabrication processes were developed thereafter. Transparent conductors with over 90% transparency and less than 10 O/square sheet resistance were successfully fabricated on both rigid and flexible substrates. Durability tests, such as bending, heating and tape tests, were carried out to evaluate the robustness of the samples. Haze factor, which characterizes how blurry a transparent conductor appears, was also studied in-depth using analytical calculation and numerical simulation. We demonstrated a tunable haze factor for metal NM transparent conductors and analyzed the principle for tuning the haze factor. Plasmonic effects, excited by some transparent conductors, can lead to enhanced performance in photovoltaic devices. We systematically studied the effect of incorporating metal NM into ultrathin film silicon solar cells using numerical simulation, with the aid of optimization algorithms to reduce the optimization time. Mechanisms contributing to the enhanced performance were then identified and analyzed. Over 72% enhancement in short

TRANSPARENT COATINGS FOR SOLAR CELLS RESEARCH

Energy Technology Data Exchange (ETDEWEB)

Glatkowski, P. J.; Landis, D. A.

2013-04-16

Todays solar cells are fabricated using metal oxide based transparent conductive coatings (TCC) or metal wires with optoelectronic performance exceeding that currently possible with Carbon Nanotube (CNT) based TCCs. The motivation for replacing current TCC is their inherent brittleness, high deposition cost, and high deposition temperatures; leading to reduced performance on thin substrates. With improved processing, application and characterization techniques Nanofiber and/or CNT based TCCs can overcome these shortcomings while offering the ability to be applied in atmospheric conditions using low cost coating processes At todays level of development, CNT based TCC are nearing commercial use in touch screens, some types of information displays (i.e. electronic paper), and certain military applications. However, the resistivity and transparency requirements for use in current commercial solar cells are more stringent than in many of these applications. Therefore, significant research on fundamental nanotube composition, dispersion and deposition are required to reach the required performance commanded by photovoltaic devices. The objective of this project was to research and develop transparent conductive coatings based on novel nanomaterial composite coatings, which comprise nanotubes, nanofibers, and other nanostructured materials along with binder materials. One objective was to show that these new nanomaterials perform at an electrical resistivity and optical transparency suitable for use in solar cells and other energy-related applications. A second objective was to generate new structures and chemistries with improved resistivity and transparency performance. The materials also included the binders and surface treatments that facilitate the utility of the electrically conductive portion of these composites in solar photovoltaic devices. Performance enhancement venues included: CNT purification and metallic tube separation techniques, chemical doping, CNT

Direct current electric potential in an anisotropic half-space with vertical contact containing a conductive 3D body

Directory of Open Access Journals (Sweden)

Li Ping

2004-01-01

Full Text Available Detailed studies of anomalous conductors in otherwise homogeneous media have been modelled. Vertical contacts form common geometries in galvanic studies when describing geological formations with different electrical conductivities on either side. However, previous studies of vertical discontinuities have been mainly concerned with isotropic environments. In this paper, we deal with the effect on the electric potentials, such as mise-à-la-masse anomalies, due to a conductor near a vertical contact between two anisotropic regions. We also demonstrate the interactive effects when the conductive body is placed across the vertical contact. This problem is normally very difficult to solve by the traditional numerical methods. The integral equations for the electric potential in anisotropic half-spaces are established. Green's function is obtained using the reflection and transmission image method in which five images are needed to fit the boundary conditions on the vertical interface and the air-earth surface. The effects of the anisotropy of the environments and the conductive body on the electric potential are illustrated with the aid of several numerical examples.

Designing and implementing transparency for real time inspection of autonomous robots

Science.gov (United States)

Theodorou, Andreas; Wortham, Robert H.; Bryson, Joanna J.

2017-07-01

The EPSRC's Principles of Robotics advises the implementation of transparency in robotic systems, however research related to AI transparency is in its infancy. This paper introduces the reader of the importance of having transparent inspection of intelligent agents and provides guidance for good practice when developing such agents. By considering and expanding upon other prominent definitions found in literature, we provide a robust definition of transparency as a mechanism to expose the decision-making of a robot. The paper continues by addressing potential design decisions developers need to consider when designing and developing transparent systems. Finally, we describe our new interactive intelligence editor, designed to visualise, develop and debug real-time intelligence.

Measurement of the CKM matrix element vertical stroke Vts vertical stroke 2

International Nuclear Information System (INIS)

Unverdorben, Christopher Gerhard

2015-03-01

This is the first direct measurement of the CKM matrix element vertical stroke V ts vertical stroke, using data collected by the ATLAS detector in 2012 at √(s)= 8 TeV pp-collisions with a total integrated luminosity of 20.3 fb -1 . The analysis is based on 112 171 reconstructed t anti t candidate events in the lepton+jets channel, having a purity of 90.0 %. 183 t anti t→W + W - b anti s decays are expected (charge conjugation implied), which are available for the extraction of the CKM matrix element vertical stroke V ts vertical stroke 2 . To identify these rare decays, several observables are examined, such as the properties of jets, tracks and of b-quark identification algorithms. Furthermore, the s-quark hadrons K 0 s are considered, reconstructed by a kinematic fit. The best observables are combined in a multivariate analysis, called ''boosted decision trees''. The responses from Monte Carlo simulations are used as templates for a fit to data events yielding a significance value of 0.7σ for t→s+W decays. An upper limit of vertical stroke V ts vertical stroke 2 <1.74 % at 95 % confidence level is set, including all systematic and statistical uncertainties. So this analysis, using a direct measurement of the CKM matrix element vertical stroke V ts vertical stroke 2 , provides the best direct limit on vertical stroke V ts vertical stroke 2 up to now.

The New Transparency: Police Violence in the Context of Ubiquitous Surveillance

Directory of Open Access Journals (Sweden)

Ben Brucato

2015-10-01

Full Text Available Media and surveillance scholars often comment on the purported empowering quality of transparency, which they expect participatory media to promote. From its Enlightenment origins, transparency is related to accountability and legitimacy: its increase is believed to promote these. It has earned a position as an unassailed, prime normative value in contemporary liberal and social democracies. Though still valued, transparency is undergoing change in an era of ubiquitous surveillance. Publics still anticipate governmental and corporate self-disclosure and for such entities to operate visibly; but increasingly, deliberate and incidental surveillance by a range of sources, both institutional and informal, documents the activities of such authorities. More often, civilians participate in producing or amplifying transparency. This article explores this new transparency through a study of U.S. police, focusing on the discourse of police accountability activists and cop watchers to describe how their work adapts traditional notions of transparency. Recognizing the resilience of the police institution despite the new visibility of its violence, the article challenges the presumption that increased transparency will promote institutional reform or crisis. It concludes with a critical comment on prominent expectations that promoting the visibility of police can protect publics and ensure police accountability. This conclusion has implications for other forms of the new transparency, including whistleblowing (e.g., Edward Snowden and leaking (e.g., WikiLeaks.

Transparent 3D display for augmented reality

Science.gov (United States)

Lee, Byoungho; Hong, Jisoo

2012-11-01

Two types of transparent three-dimensional display systems applicable for the augmented reality are demonstrated. One of them is a head-mounted-display-type implementation which utilizes the principle of the system adopting the concave floating lens to the virtual mode integral imaging. Such configuration has an advantage in that the threedimensional image can be displayed at sufficiently far distance resolving the accommodation conflict with the real world scene. Incorporating the convex half mirror, which shows a partial transparency, instead of the concave floating lens, makes it possible to implement the transparent three-dimensional display system. The other type is the projection-type implementation, which is more appropriate for the general use than the head-mounted-display-type implementation. Its imaging principle is based on the well-known reflection-type integral imaging. We realize the feature of transparent display by imposing the partial transparency to the array of concave mirror which is used for the screen of reflection-type integral imaging. Two types of configurations, relying on incoherent and coherent light sources, are both possible. For the incoherent configuration, we introduce the concave half mirror array, whereas the coherent one adopts the holographic optical element which replicates the functionality of the lenslet array. Though the projection-type implementation is beneficial than the head-mounted-display in principle, the present status of the technical advance of the spatial light modulator still does not provide the satisfactory visual quality of the displayed three-dimensional image. Hence we expect that the head-mounted-display-type and projection-type implementations will come up in the market in sequence.

A meaning for transparency in decision processes

Energy Technology Data Exchange (ETDEWEB)

Wene, C.O. [Chalmers Univ. of Technology, Goeteborg (Sweden). Energy System Technology; Espejo, R. [Univ. of Lincolnshire and Humberside, Lincoln (United Kingdom). Lincoln School of Management

1999-12-01

In this paper we discuss transparency in decision processes. We argue that transparency requires fostering, producing and maintaining distributed dialogues and communications between all those affected by (the stakeholders) and those producing these decisions (the decision makers and the actors/experts). The issues raised in these dialogues will not only refer to questions of technical efficiency, but also to what is right and fair and what is considered to be good in society. Social policies, particularly those of wide social significance, are in one form or another the outcome of multiple meaning creation processes, reflecting their multiple spheres of influence, from the local to the global, from the disciplinary to the multi- and transdisciplinary. Each of these processes requires transparency. This paper is focused on the structural requirements to make these dialogues and communications effective at all levels, taking into account the need for technical explanation, proof of authenticity and legitimacy of actions. Moreover it is concerned with the alignment of these meanings creation processes in order to increase the chances of having not only a distributed but also a coherent overall decision process. Our emphasis is in defining forms of interaction among stakeholders in order to ground the debate of the policy throughout the organisation, beyond senior levels of management. The aim is increasing the demands on those responsible for policy implementation, stretching them so that they offer the best of themselves. We argue that this is the basis for a structural mechanism for transparency. The outcome of this paper is a conceptual framework to study issues of transparency in policy making which is illustrated with reference to nuclear waste management in Sweden.

A meaning for transparency in decision processes

International Nuclear Information System (INIS)

Wene, C.O.; Espejo, R.

1999-01-01

In this paper we discuss transparency in decision processes. We argue that transparency requires fostering, producing and maintaining distributed dialogues and communications between all those affected by (the stakeholders) and those producing these decisions (the decision makers and the actors/experts). The issues raised in these dialogues will not only refer to questions of technical efficiency, but also to what is right and fair and what is considered to be good in society. Social policies, particularly those of wide social significance, are in one form or another the outcome of multiple meaning creation processes, reflecting their multiple spheres of influence, from the local to the global, from the disciplinary to the multi- and transdisciplinary. Each of these processes requires transparency. This paper is focused on the structural requirements to make these dialogues and communications effective at all levels, taking into account the need for technical explanation, proof of authenticity and legitimacy of actions. Moreover it is concerned with the alignment of these meanings creation processes in order to increase the chances of having not only a distributed but also a coherent overall decision process. Our emphasis is in defining forms of interaction among stakeholders in order to ground the debate of the policy throughout the organisation, beyond senior levels of management. The aim is increasing the demands on those responsible for policy implementation, stretching them so that they offer the best of themselves. We argue that this is the basis for a structural mechanism for transparency. The outcome of this paper is a conceptual framework to study issues of transparency in policy making which is illustrated with reference to nuclear waste management in Sweden

Transparent doesn't always make it right

International Nuclear Information System (INIS)

Frishman, S.

1999-01-01

The increasing drive for transparency in risk assessment, performance assessment, and decision-making in the controversial area of nuclear waste management has its foundation in the desire to foster the assumption that, if the outcome of the process is a clear result of the fully exposed contributory elements, then that outcome must be accepted as correct. This is in stark contrast to the general need for transparency in any analysis or decision process - to give the outcome credibility. Transparency in the nuclear waste decision arena is being cast as an end in itself, rather than as a tool to shape the product of the assessment or decision process. It is not enough to permit knowledge of exactly what was done to arrive at a particular result, since at best, this only leads to reproducibility. The challenge is to expose why certain steps or assumptions were chosen for pursuit, and what suites of relevant steps or assumptions were rejected and why. It is also important to demonstrate that the trail to the product - the assessment or decision - is complete. In the nuclear waste management field, the complete scope of the assessment or decision process is not always fully exposed because it does not include the assumptions that initiated the process or the possible consequences of the product. In both instances, this failure can serve to limit the steps or assumptions pursued in the process. This paper will describe and discuss examples from the nuclear waste management field and the U.S. high-level nuclear waste program that illustrate the need for transparency, but also demonstrate that transparency does not always lead to an acceptable product

The health care value transparency movement and its implications for radiology.

Science.gov (United States)

Durand, Daniel J; Narayan, Anand K; Rybicki, Frank J; Burleson, Judy; Nagy, Paul; McGinty, Geraldine; Duszak, Richard

2015-01-01

The US health care system is in the midst of disruptive changes intended to expand access, improve outcomes, and lower costs. As part of this movement, a growing number of stakeholders have advocated dramatically increasing consumer transparency into the quality and price of health care services. The authors review the general movement toward American health care value transparency within the public, private, and nonprofit sectors, with an emphasis on those initiatives most relevant to radiology. They conclude that radiology, along with other "ancillary services," has been a major focus of early efforts to enhance consumer price transparency. By contrast, radiology as a field remains in the "middle of the pack" with regard to quality transparency. There is thus the danger that radiology value transparency in its current form will stimulate primarily price-based competition, erode provider profit margins, and disincentivize quality. The authors conclude with suggested actions radiologists can take to ensure that a more optimal balance is struck between quality transparency and price transparency, one that will enable true value-based competition among radiologists rather than commoditization. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

The Morality of Transparency: A Comparison of NGOs and Business Ethics

OpenAIRE

Sampson, Steven

2015-01-01

Paper presented at Workshop on the Sociology of Transparency, Univ. Osnabruck, Nov. 2015. Disclosure and transparency, being open so that others can look deeper into to your organization, is not just a requirement imposed by government regulations or funding agencies. Transparency is also tied to a value of authenticity, sincerity and ethics. There is moral dimension to transparency. Being open is to be good. Concealment or opacity is bad. On the other hand, there are those who say that trans...

Transparent semiconducting oxides: materials and devices

Energy Technology Data Exchange (ETDEWEB)

Grundmann, Marius; Frenzel, Heiko; Lajn, Alexander; Lorenz, Michael; Schein, Friedrich; von Wenckstern, Holger [Universitaet Leipzig, Institut fuer Experimentelle Physik II, Linnestr. 5, 04103 Leipzig (Germany)

2010-06-15

Transparent conductive oxides (TCOs) are a well-known material class allowing Ohmic conduction. A large free carrier concentration in the 10{sup 21} cm{sup -3} range and high conductivity (beyond 10{sup 4} S/cm) is feasible simultaneously with high transparency. Applications are manifold and include touch screens and front contacts for displays or solar cells. Transparent semiconducting oxides (TSO) are oxides with an intermediate free carrier concentration (typically 10{sup 14}-10{sup 18} cm{sup -3}) allowing the formation of depletion layers. We review recent results on TSO-based transistors and inverters. Most work has been reported on MISFETs. We show that MESFETs exhibit high performance and low voltage operation of oxide electronics. MESFET-based inverters offer superior performance compared to results reported for TSO MISFET-based circuits. Optical image of inverter based on thin film MESFETs with Mg{sub 0.003}Zn{sub 0.997}O channels (left) and experimental inverter characteristic for supply voltage of V{sub DD} = + 2.0 V (right). (Abstract Copyright [2010], Wiley Periodicals, Inc.)

Superhydrophobic and anti-reflective ZnO nanorod-coated FTO transparent conductive thin films prepared by a three-step method

Energy Technology Data Exchange (ETDEWEB)

Li, Bao-jia, E-mail: li_bjia@126.com [School of Materials Science and Engineering, Jiangsu University, Zhenjiang, 212013 (China); Jiangsu Provincial Key Laboratory of Center for Photon Manufacturing Science and Technology, Jiangsu University, Zhenjiang, 212013 (China); Huang, Li-jing; Ren, Nai-fei [Jiangsu Provincial Key Laboratory of Center for Photon Manufacturing Science and Technology, Jiangsu University, Zhenjiang, 212013 (China); School of Mechanical Engineering, Jiangsu University, Zhenjiang, 212013 (China); Kong, Xia; Cai, Yun-long; Zhang, Jie-lu [Jiangsu Tailong Reduction Box Co. Ltd., Taixing, 225400 (China)

2016-07-25

A ZnO nanorod-coated FTO film was prepared by sputtering an AZO layer on FTO glass, thermal annealing of the AZO/FTO film, and hydrothermal growth of ZnO nanorods at 70 °C on the annealed AZO/FTO film using zinc foils as zinc source. Two other ZnO nanorod-coated FTO films were also prepared by hydrothermal growths of ZnO nanorods on the FTO glass and the unannealed AZO/FTO film respectively for comparison purpose. The results were observed in detail using X-ray diffraction, scanning electron microscopy, water contact/sliding angle measurement, spectrophotometry and four-point probe measurement. The ZnO nanorods on the annealed AZO/FTO film were found to exhibit denser distribution and better orientation than those on the FTO glass and the unannealed AZO/FTO film. As a result, the ZnO nanorod-coated annealed AZO/FTO film demonstrated superhydrophobicity, high transparency and low reflectance in the visible range. Also this film had the lowest sheet resistance of 4.0 Ω/sq, implying its good electrical conductivity. This investigation provides a valuable reference for developing multifunctional transparent conductive films. - Highlights: • ZnO nanorod-coated annealed AZO/FTO film was obtained by a three-step method. • FTO and unannealed AZO/FTO films were also used as substrates for comparison. • ZnO nanorods on the annealed AZO/FTO film were denser and more vertically-oriented. • The ZnO nanorod-coated annealed AZO/FTO film (Z/TA-FTO) had superhydrophobicity. • The Z/TA-FTO exhibited high transparency, low reflectance and good conductivity.

Strengthening Transparency in Regulatory Science

Science.gov (United States)

Where available and appropriate, EPA will use peer-reviewed information, standardized test methods, consistent data evaluation procedures, and good laboratory practices to ensure transparent, understandable, and reproducible scientific assessments.

Introducing modern technology to promote transparency in health services.

Science.gov (United States)

Islam, Mohammad Shafiqul

2015-01-01

Quantitative indicators show that Bangladeshi maternal and child healthcare is progressing satisfactorily. However, healthcare quality is still inadequate. It is hypothesised that modern technology enhances healthcare quality. Therefore, the purpose of this paper is to investigate how modern technology such as electronic record keeping and the internet can contribute to enhancing Bangladeshi healthcare quality. This study also explores how socio-economic and political factors affect the healthcare quality. This paper is based on a qualitative case study involving 68 in-depth interviews with healthcare professionals, elected representatives, local informants and five focus group discussions with healthcare service users to understand technology's effect on health service quality. The study has been conducted in one rural and one urban service organisations to understand how various factors contribute differently to healthcare quality. The findings show that modern technology, such as the internet and electronic devices for record keeping, contribute significantly to enhancing health service transparency, which in turn leads to quality health and family planning services. The findings also show that information and communication technology (ICT) is an effective mechanism for reducing corruption and promoting transparency. However, resource constraints impact adversely on the introduction of technology, which leads to less transparent healthcare. Progress in education and general socio-economic conditions makes it suitable to enhance ICT usage, which could lead to healthcare transparency, but political and bureaucratic factors pose a major challenge to ensure transparency. This paper can be a useful guide for promoting governance and healthcare quality in developing countries including Bangladesh. It analyses the ICT challenges that healthcare staff face when promoting transparent healthcare. This paper provides a deeper understanding of transparency and healthcare

Dual-sided microstructured semiconductor neutron detectors (DSMSNDs)

International Nuclear Information System (INIS)

Fronk, Ryan G.; Bellinger, Steven L.; Henson, Luke C.; Ochs, Taylor R.; Smith, Colten T.; Kenneth Shultis, J.; McGregor, Douglas S.

2015-01-01

Microstructured semiconductor neutron detectors (MSNDs) have in recent years received much interest as high-efficiency replacements for thin-film-coated thermal neutron detectors. The basic device structure of the MSND involves micro-sized trenches that are etched into a vertically-oriented pvn-junction diode that are backfilled with a neutron converting material. Neutrons absorbed within the converting material induce fission of the parent nucleus, producing a pair of energetic charged-particle reaction products that can be counted by the diode. The MSND deep-etched microstructures produce good neutron-absorption and reaction-product counting efficiencies, offering a 10× improvement in intrinsic thermal neutron detection efficiency over thin-film-coated devices. Performance of present-day MSNDs are nearing theoretical limits; streaming paths between the conversion-material backfilled trenches, allow a considerable fraction of neutrons to pass undetected through the device. Dual-sided microstructured semiconductor neutron detectors (DSMSNDs) have been developed that utilize a complementary second set of trenches on the back-side of the device to count streaming neutrons. DSMSND devices are theoretically capable of greater than 80% intrinsic thermal neutron detection efficiency for a 1-mm thick device. The first such prototype DSMSNDs, presented here, have achieved 29.48±0.29% nearly 2× better than MSNDs with similar microstructure dimensions.

Transparency in nursing leadership: a chosen ethic.

Science.gov (United States)

Milton, Constance L

2009-01-01

The concept of transparency has been viewed as an essential leadership attribute or element in healthcare organizational structures and processes. While viewed as something that is desired and valued, there is a lack of nursing disciplinary literature that defines the concept and its possible meanings. This column provides a beginning definition of transparency from the humanbecoming nursing theoretical perspective and launches a discussion with potential ethical implications for leadership in nursing practice and education.

Transparent wood for functional and structural applications

Science.gov (United States)

Li, Yuanyuan; Fu, Qiliang; Yang, Xuan; Berglund, Lars

2017-12-01

Optically transparent wood combines mechanical performance with optical functionalities is an emerging candidate for applications in smart buildings and structural optics and photonics. The present review summarizes transparent wood preparation methods, optical and mechanical performance, and functionalization routes, and discusses potential applications. The various challenges are discussed for the purpose of improved performance, scaled-up production and realization of advanced applications. This article is part of a discussion meeting issue `New horizons for cellulose nanotechnology'.

Transparency and imaginary colors

NARCIS (Netherlands)

Richards, W.; Koenderink, J.J.; Van Doorn, A.

2009-01-01

Unlike the Metelli monochrome transparencies, when overlays and their backgrounds have chromatic content, the inferred surface colors may not always be physically realizable, and are in some sense “imaginary.” In these cases, the inferred chromatic transmittance or reflectance of the overlay lies

Polarization-independent transparency window induced by complementary graphene metasurfaces

International Nuclear Information System (INIS)

Lu, Wei Bing; Liu, Ji Long; Zhang, Jin; Wang, Jian; Liu, Zhen Guo

2017-01-01

A fourfold symmetric graphene-based complementary metasurface featuring a polarization-independent transparency window is proposed and numerically analysed in this paper. The unit cell of the metamaterial consists of a monolayer graphene perforated with a cross and four identical split-ring resonators deposited on a substrate. Our analysis shows that the transparency window can be interpreted as a plasmonic analogy of Autler–Townes splitting. The polarization independence is achieved due to the fourfold symmetry of graphene’s complementary structure. In addition, the frequency range of the transparency window can be dynamically tuned over a broad band by changing the chemical potential of graphene, and the width of the transparency window can also be controlled by changing the split-gap orientation. This work may lead to potential applications in many area, such as slow-light devices and optical sensing. (paper)

Transparent and Printable Regenerated Kenaf Cellulose/PVA Film

Directory of Open Access Journals (Sweden)

Hatika Kaco

2014-02-01

Full Text Available Cellulose was extracted from kenaf core powder by a series of bleaching processes and subsequently dissolved using an alkaline LiOH/urea solvent at low temperatures. The produced cellulose solution was mixed with polyvinyl alcohol (PVA with different ratios of cellulose/PVA and coagulated to produce regenerated transparent films. The films were then air dried to produce transparent film. The effects of PVA content on tensile index, transparency, pore size, and printability of the films were studied. A slight reduction of 7% on the tensile index of the film was observed when the content of PVA increased to 10%. Nevertheless, the addition of 10% of PVA increased the porosity of the regenerated cellulose/PVA film, while the transparency of the film increased by 10%. The films were color-printed using a laser printer and can be recycled, in which the printed ink can be removed easily from the films with higher amount of PVA content. In addition, the films can be reprinted repeatedly several times.

The transparency trap.

Science.gov (United States)

Bernstein, Ethan

2014-10-01

To promote accountability, productivity, and shared learning, many organizations create open work environments and gather reams of data on how individuals spend their time. A few years ago, HBS professor Ethan Bernstein set out to find empirical evidence that such approaches improve organizational performance. What he discovered is that this kind of transparency often has an unintended consequence: It can leave employees feeling vulnerable and exposed. When that happens, they conceal any conduct that deviates from the norm so that they won't have to explain it. Unrehearsed, experimental behaviors sometimes stop altogether. But Bernstein also discovered organizations that had established zones of privacy within open environments by setting four types of boundaries: around teams, between feedback and evaluation, between decision rights and improvement rights, and around periods of experimentation. Moreover, across several studies, the companies that had done all this were the ones that consistently got the most creative, efficient, and thoughtful work from their employees. Bernstein's conclusion? By balancing transparency and privacy, organizations can capture the benefits of both, and encourage just the right amount of "positive deviance" needed to increase innovation and productivity.

Flexible transparent electrode

Science.gov (United States)

Demiryont, Hulya; Shannon, Kenneth C., III; Moorehead, David; Bratcher, Matthew

2011-06-01

This paper presents the properties of the EclipseTECTM transparent conductor. EclipseTECTM is a room temperature deposited nanostructured thin film coating system comprised of metal-oxide semiconductor elements. The system possesses metal-like conductivity and glass-like transparency in the visible region. These highly conductive TEC films exhibit high shielding efficiency (35dB at 1 to 100GHz). EclipseTECTM can be deposited on rigid or flexible substrates. For example, EclipseTECTM deposited on polyethylene terephthalate (PET) is extremely flexible that can be rolled around a 9mm diameter cylinder with little or no reduction in electrical conductivity and that can assume pre-extension states after an applied stress is relieved. The TEC is colorless and has been tailored to have high visible transmittance which matches the eye sensitivity curve and allows the viewing of true background colors through the coating. EclipseTECTM is flexible, durable and can be tailored at the interface for applications such as electron- or hole-injecting OLED electrodes as well as electrodes in flexible displays. Tunable work function and optical design flexibility also make EclipseTECTM well-suited as a candidate for grid electrode replacement in next-generation photovoltaic cells.

Graphene-based transparent electrodes for hybrid solar cells

Directory of Open Access Journals (Sweden)

Pengfei eLi

2014-11-01

Full Text Available The graphene-based transparent and conductive films were demonstrated to be cost-effective electrodes working in organic-inorganic hybrid Schottky solar cells. Large area graphene films were produced by chemical vapor deposition (CVD on copper foils and transferred onto glass as transparent electrodes. The hybrid solar cell devices consist of solution processed poly (3, 4-ethlenedioxythiophene: poly (styrenesulfonate (PEDOT: PSS which is sandwiched between silicon wafer and graphene electrode. The solar cells based on graphene electrodes, especially those doped with HNO3, has comparable performance to the reference devices using commercial indium tin oxide (ITO. Our work suggests that graphene-based transparent electrode is a promising candidate to replace ITO.

A Network Diffusion Model of Food Safety Scare Behavior considering Information Transparency

Directory of Open Access Journals (Sweden)

Tingqiang Chen

2017-01-01

Full Text Available This study constructs the network diffusion model of food safety scare behavior under the effect of information transparency and examines the network topology and evolution characteristics of food safety scare behavior in a numerical simulation. The main conclusions of this study are as follows. (1 Under the effect of information transparency, the network degree distribution of food safety scare behavior diffusion demonstrates the decreasing characteristics of diminishing margins. (2 Food safety scare behavior diffusion increases with the information dissemination rate and consumer concern about food safety incidents and shows the characteristics of monotone increasing. And with the increasing of the government food safety supervision information transparency and media food safety supervision information transparency, the whole is declining characteristic of diminishing marginal. In addition, the extinction of food safety scare behavior cannot be achieved gradually given a single regulation of government food safety supervision information transparency and media food safety supervision information transparency. (3 The interaction effects between improving government food safety supervision information transparency or media food safety supervision information transparency and declining consumer concerns about food safety incidents or information transmission rate can engender the suppression of food safety scare behavior diffusion.

Hybrid nanostructure heterojunction solar cells fabricated using vertically aligned ZnO nanotubes grown on reduced graphene oxide.

Science.gov (United States)

Yang, Kaikun; Xu, Congkang; Huang, Liwei; Zou, Lianfeng; Wang, Howard

2011-10-07

Using reduced graphene oxide (rGO) films as the transparent conductive coating, inorganic/organic hybrid nanostructure heterojunction photovoltaic devices have been fabricated through hydrothermal synthesis of vertically aligned ZnO nanorods (ZnO-NRs) and nanotubes (ZnO-NTs) on rGO films followed by the spin casting of a poly(3-hexylthiophene) (P3HT) film. The data show that larger interfacial area in ZnO-NT/P3HT composites improves the exciton dissociation and the higher electrode conductance of rGO films helps the power output. This study offers an alternative to manufacturing nanostructure heterojunction solar cells at low temperatures using potentially low cost materials.

All-dielectric resonant cavity-enabled metals with broadband optical transparency

Science.gov (United States)

Liu, Zhengqi; Zhang, Houjiao; Liu, Xiaoshan; Pan, Pingping; Liu, Yi; Tang, Li; Liu, Guiqiang

2017-06-01

Metal films with broadband optical transparency are desirable in many optoelectronic devices, such as displays, smart windows, light-emitting diodes and infrared detectors. As bare metal is opaque to light, this issue of transparency attracts great scientific interest. In this work, we proposed and demonstrated a feasible and universal approach for achieving broadband optical transparent (BOT) metals by utilizing all-dielectric resonant cavities. Resonant dielectrics provide optical cavity modes and couple strongly with the surface plasmons of the metal film, and therefore produce a broadband near-unity optical transparent window. The relative enhancement factor (EF) of light transmission exceeds 3400% in comparison with that of pure metal film. Moreover, the transparent metal motif can be realized by other common metals including gold (Au), silver (Ag) and copper (Cu). These optical features together with the fully retained electric and mechanical properties of a natural metal suggest that it will have wide applications in optoelectronic devices.

STS-46 Atlantis', OV-104's, vertical tail and OMS pods lit up by RCS jet firing

Science.gov (United States)

1992-01-01

STS-46 Atlantis', Orbiter Vehicle (OV) 104's, vertical tail and orbital maneuvering system (OMS) pods are highlighted by the glow of the reaction control system (RCS) jet firings. OV-104 was at an altitude of 128 nautical miles. The remote manipulator system (RMS) arm is partially visible stowed along the port side sill longeron.

Electromagnetically induced transparency in metamaterials at near-infrared frequency

DEFF Research Database (Denmark)

Zhang, Jingjing; Xiao, Sanshui; Jeppesen, Claus

2010-01-01

We employ a planar metamaterial structure composed of a splitring-resonator (SRR) and paired nano-rods to experimentally realize a spectral response at near-infrared frequencies resembling that of electromagnetically induced transparency. A narrow transparency window associated with low loss...

Transparent Proxy for Secure E-Mail

Science.gov (United States)

Michalák, Juraj; Hudec, Ladislav

2010-05-01

The paper deals with the security of e-mail messages and e-mail server implementation by means of a transparent SMTP proxy. The security features include encryption and signing of transported messages. The goal is to design and implement a software proxy for secure e-mail including its monitoring, administration, encryption and signing keys administration. In particular, we focus on automatic public key on-the-fly encryption and signing of e-mail messages according to S/MIME standard by means of an embedded computer system whose function can be briefly described as a brouter with transparent SMTP proxy.

Design of a low parasitic inductance SiC power module with double-sided cooling

Energy Technology Data Exchange (ETDEWEB)

Yang, Fei [The University of Tennessee, Knoxville; Liang, Zhenxian [Cree Inc.; Wang, Fei [ORNL; Wang, Zhiqiang [ORNL

2017-03-01

In this paper, a low-parasitic inductance SiC power module with double-sided cooling is designed and compared with a baseline double-sided cooled module. With the unique 3D layout utilizing vertical interconnection, the power loop inductance is effectively reduced without sacrificing the thermal performance. Both simulations and experiments are carried out to validate the design. Q3D simulation results show a power loop inductance of 1.63 nH, verified by the experiment, indicating more than 60% reduction of power loop inductance compared with the baseline module. With 0Ω external gate resistance turn-off at 600V, the voltage overshoot is less than 9% of the bus voltage at a load of 44.6A.

Healable, Transparent, Room-Temperature Electronic Sensors Based on Carbon Nanotube Network-Coated Polyelectrolyte Multilayers.

Science.gov (United States)

Bai, Shouli; Sun, Chaozheng; Yan, Hong; Sun, Xiaoming; Zhang, Han; Luo, Liang; Lei, Xiaodong; Wan, Pengbo; Chen, Xiaodong

2015-11-18

Transparent and conductive film based electronics have attracted substantial research interest in various wearable and integrated display devices in recent years. The breakdown of transparent electronics prompts the development of transparent electronics integrated with healability. A healable transparent chemical gas sensor device is assembled from layer-by-layer-assembled transparent healable polyelectrolyte multilayer films by developing effective methods to cast transparent carbon nanotube (CNT) networks on healable substrates. The healable CNT network-containing film with transparency and superior network structures on self-healing substrate is obtained by the lateral movement of the underlying self-healing layer to bring the separated areas of the CNT layer back into contact. The as-prepared healable transparent film is assembled into healable transparent chemical gas sensor device for flexible, healable gas sensing at room temperature, due to the 1D confined network structure, relatively high carrier mobility, and large surface-to-volume ratio. The healable transparent chemical gas sensor demonstrates excellent sensing performance, robust healability, reliable flexibility, and good transparency, providing promising opportunities for developing flexible, healable transparent optoelectronic devices with the reduced raw material consumption, decreased maintenance costs, improved lifetime, and robust functional reliability. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Active multiple plasmon-induced transparencies with detuned asymmetric multi-rectangle resonators

Science.gov (United States)

Liu, Dongdong; Wang, Jicheng; Lu, Jian

2016-11-01

The phenomenon of plasmon-induced transparency (PIT) is realized in surface plasmon polariton waveguide at the visible and near-infrared ranges. By adding one and two resonant cavities, the PIT peak(s) was (were) achieved due to destructive interference between the side-coupled rectangle cavity and the bus waveguide. The proposed structures were demonstrated by the finite element method. The simulation results showed that for three rectangle resonators system, not only can we manipulate each single PIT window, but also the double PIT windows simultaneously by adjusting one of the geometrical parameters of the system; for four rectangle resonators system, by changing the widths, the lengths and the refractive index of three cavities simultaneously, we would realize treble PIT peaks and induce an off-to-on PIT optical response. Our novel plasmonic structures and the findings pave the way for new design and engineering of highly integrated optical circuit such as nanoscale optical switching, nanosensor and wavelength-selecting nanostructure.

Patients' views on price shopping and price transparency.

Science.gov (United States)

Semigran, Hannah L; Gourevitch, Rebecca; Sinaiko, Anna D; Cowling, David; Mehrotra, Ateev

2017-06-01

Driven by the growth of high deductibles and price transparency initiatives, patients are being encouraged to search for prices before seeking care, yet few do so. To understand why this is the case, we interviewed individuals who were offered access to a widely used price transparency website through their employer. Qualitative interviews. We interviewed individuals enrolled in a preferred provider organization product through their health plan about their experience using the price transparency tool (if they had done so), their past medical experiences, and their opinions on shopping for care. All interviews were transcribed and manually coded using a thematic coding guide. In general, respondents expressed frustration with healthcare costs and had a positive opinion of the idea of price shopping in theory, but 2 sets of barriers limited their ability to do so in reality. The first was the salience of searching for price information. For example, respondents recognized that due to their health plan benefits design, they would not save money by switching to a lower-cost provider. Second, other factors were more important than price for respondents when choosing a provider, including quality and loyalty to current providers. We found a disconnect between respondents' enthusiasm for price shopping and their reported use of a price transparency tool to shop for care. However, many did find the tool useful for other purposes, including checking their claims history. Addressing the barriers to price shopping identified by respondents can help inform ongoing and future price transparency initiatives.

Multidimensional Ranking: A New Transparency Tool for Higher Education and Research

Science.gov (United States)

van Vught, Frans; Westerheijden, Don F.

2010-01-01

This paper sets out to analyse the need for better "transparency tools" which inform university stakeholders about the quality of universities. First, we give an overview of what we understand by the concept of transparency tools and those that are currently available. We then critique current transparency tools' methodologies, looking in detail…

Transparency Under Scrutiny: Information Disclosure in Global Environmental Governance.

NARCIS (Netherlands)

Gupta, A.

2008-01-01

Although transparency is a key concept of our times, it remains a relatively understudied phenomenon in global environmental politics. The link between transparency and accountable, legitimate and effective governance is assumed, yet the nature and workings of this link require further scrutiny.

Sintering and annealing effects on undoped yttria transparent ceramics

Energy Technology Data Exchange (ETDEWEB)

Letue, Laetitia; Petit, Johan, E-mail: johan.petit@onera.fr; Ritti, Marie-Hélène; Lalanne, Sylvie; Landais, Stéphane

2017-06-15

Transparent yttrium oxide (Y{sub 2}O{sub 3}) ceramics were processed by several densifications steps without any doping species. The green bodies were obtained by the aqueous way and sintered at high temperature under vacuum and then under high pressure. We studied the effects of different sintering cycles and air annealing at different steps of the process on the density and the grain growth. We also focused on the reaction between yttria ceramics and BN-coated graphite crucible which occurs during HIP. We noted that a low heating rate and two annealing steps are necessary to improve our samples’ transparency. - Highlights: • The quality of transparent ceramics is compared with the tested process parameters. • Air annealing is critical when using a carbon environment in the process. • Intra-granular pores, and so the final transparency, are directly linked to the sintering heating rates.

The effect of linear spring number at side load of McPherson suspension in electric city car

Science.gov (United States)

Budi, Sigit Setijo; Suprihadi, Agus; Makhrojan, Agus; Ismail, Rifky; Jamari, J.

2017-01-01

The function of the spring suspension on Mc Pherson type is to control vehicle stability and increase ride convenience although having tendencies of side load presence. The purpose of this study is to obtain simulation results of Mc Pherson suspension spring in the electric city car by using the finite element method and determining the side load that appears on the spring suspension. This research is conducted in several stages; they are linear spring designing models with various spring coil and spring suspension modeling using FEM software. Suspension spring is compressed in the vertical direction (z-axis) and at the upper part of the suspension springs will be seen the force that arises towards the x, y, and z-axis to simulate the side load arising on the upper part of the spring. The results of FEM simulation that the side load on the spring toward the x and y-axis which the value gets close to zero is the most stable spring.

Length-controlled few-walled carbon nanotubes and their effect on the electrical property of flexible transparent conductive films

Science.gov (United States)

Lee, Byeong-Joo; Shin, Eui-Chul; Jeong, Goo-Hwan

2012-06-01

We investigated the effect of the length of carbon nanotubes (CNTs) on the electrical property of CNT-based flexible, transparent, and conductive films (TCFs). We grew vertically aligned CNTs with controlled lengths, dispersed them in ethanol by ultrasonication, and spray coated them onto polyethylene terephthalate (PET) sheets. We focused on the variation in the sheet resistance and transmittance of the above-mentioned films as a function of the CNT length, and we found that the optimum CNT length was 200 μm. We concluded that the CNT length should be carefully optimized because a shorter tube affords the advantage of efficient dispersion, while a longer tube helps in reducing the number of contact points between tubes along the electrical conduction path.

Transparent Memory For Harsh Electronics

KAUST Repository

Ho, C. H.; Duran Retamal, Jose Ramon; Yang, P. K.; Lee, C. P.; Tsai, M. L.; Kang, C. F.; He, Jr-Hau

2017-01-01

As a new class of non-volatile memory, resistive random access memory (RRAM) offers not only superior electronic characteristics, but also advanced functionalities, such as transparency and radiation hardness. However, the environmental tolerance

ZnO-Based Transparent Conductive Thin Films: Doping, Performance, and Processing

International Nuclear Information System (INIS)

Liu, Y.; Li, Y.; Zeng, H.

2013-01-01

ZnO-based transparent conductive thin films have attracted much attention as a promising substitute material to the currently used indium-tin-oxide thin films in transparent electrode applications. However, the detailed function of the dopants, acting on the electrical and optical properties of ZnO-based transparent conductive thin films, is not clear yet, which has limited the development and practical applications of ZnO transparent conductive thin films. Growth conditions such as substrate type, growth temperature, and ambient atmosphere all play important roles in structural, electrical, and optical properties of films. This paper takes a panoramic view on properties of ZnO thin films and reviews the very recent works on new, efficient, low-temperature, and high-speed deposition technologies. In addition, we highlighted the methods of producing ZnO-based transparent conductive film on flexible substrate, one of the most promising and rapidly emerging research areas. As optimum-processing-parameter conditions are being obtained and their influencing mechanism is becoming clear, we can see that there will be a promising future for ZnO-based transparent conductive films.

Are the Most Prestigious Medical Journals Transparent Enough?

Science.gov (United States)

Dal-Ré, Rafael

2016-09-01

The International Committee of Medical Journal Editors (ICMJE) has played a critical role in enhancing medical science reporting. Transparency in research is one of its most important objectives and the ICMJE has issued requirements for various stakeholders. However, ICMJE member journals have repeatedly failed to fully comply with a few transparency requirements. Copyright © 2016 Elsevier Ltd. All rights reserved.

Transparent conductive oxides for thin-film silicon solar cells

NARCIS (Netherlands)

Löffler, J.

2005-01-01

This thesis describes research on thin-film silicon solar cells with focus on the transparent conductive oxide (TCO) for such devices. In addition to the formation of a transparent and electrically conductive front electrode for the solar cell allowing photocurrent collection with low ohmic losses,

Transparent parsing : Head-driven processing of verb-final structures

NARCIS (Netherlands)

Mulders, I.C.M.C.

2002-01-01

The conceptual guideline underlying this study is that the goal of processing theory should be to construct a transparent parser. A transparent parser is a parser which employs only properties and relations that are available in the grammar, without resorting to processing-specific notions. Under

Transparency, corporate governance and firm performance in The Netherlands

NARCIS (Netherlands)

van Beusichem, Herman Clasinus; de Jong, Abe; DeJong, Douglas; Mertens, Gerard

2016-01-01

We explore the relations between transparency, corporate governance, and performance for Dutch exchange-listed firms over 1997-2007. Our measure for transparency is based on annual report information. In 2005 a new accounting standard (IFRS) became mandatory and applicable to the annual reports of

Femtosecond laser induced phenomena in transparent solid materials

DEFF Research Database (Denmark)

Tan, D.Z.; Sharafudeen, K.N.; Yue, Yuanzheng

2016-01-01

solved, especially concerning the interaction of strong, ultra-short electromagnetic pulses with matter, and also because potential advanced technologies will emerge due to the impressive capability of the intense femtosecond laser to create new material structures and hence functionalities. When......The interaction of intense femtosecond laser pulses with transparent materials is a topic that has caused great interest of scientists over the past two decades. It will continue to be a fascinating field in the coming years. This is because many challenging fundamental problems have not been......–matter interaction, and fabricate various integrated micro-devices. In recent years we have witnessed exciting development in understanding and applying femtosecond laser induced phenomena in transparent materials. The interaction of femtosecond laser pulses with transparent materials relies on non...

Friend or foe: exploiting sensor failures for transparent object localization and classification

Science.gov (United States)

Seib, Viktor; Barthen, Andreas; Marohn, Philipp; Paulus, Dietrich

2017-02-01

In this work we address the problem of detecting and recognizing transparent objects using depth images from an RGB-D camera. Using this type of sensor usually prohibits the localization of transparent objects since the structured light pattern of these cameras is not reflected by transparent surfaces. Instead, transparent surfaces often appear as undefined values in the resulting images. However, these erroneous sensor readings form characteristic patterns that we exploit in the presented approach. The sensor data is fed into a deep convolutional neural network that is trained to classify and localize drinking glasses. We evaluate our approach with four different types of transparent objects. To our best knowledge, no datasets offering depth images of transparent objects exist so far. With this work we aim at closing this gap by providing our data to the public.

Opaque Transparency: Why California’s Supply Chain Transparency Act is Unenforceable

Directory of Open Access Journals (Sweden)

Benjamin Thomas Greer

2018-03-01

Full Text Available Traffickers are dynamic, fluid operators; reacting well to consumer demand, under-regulated economic sectors, and easily adapting to exploit weaknesses in prevailing laws. Corporate globalization of storefronts and extensive manufacturing supply chains have contributed to human trafficking becoming the fastest growing criminal enterprise in the world. California’s legislative and social experiments are often models other governments look to for guidance. California is the first government to require businesses to disclose their anti-trafficking supply chain policies to their consumers. Under the California Transparency in Supply Chains Act of 2010 (CATSCA, large retailer sellers must conspicuously disclose on their web site their policies, if any, to detect and fight slave labor within their supply chain. This article explores the requirements of the CATSCA and will examine the legal effectiveness of the California transparency framework. Los traficantes son agentes dinámicos, de gran fluidez: reaccionan bien a la demanda de los consumidores y a los sectores económicos sin regular, y se adaptan fácilmente para explotar las debilidades de las leyes vigentes. La globalización corporativa de los comercios y de las grandes cadenas de suministro ha contribuido a que el tráfico de personas se haya convertido en el negocio criminal de crecimiento más rápido en el mundo. El gobierno de California ha sido el primero en exigir que los negocios revelen a sus clientes su política anti-tráfico. El llamado California Transparency in Supply Chains Act (CATSCA, de 2010, obliga a los mayoristas a publicar en sus sitios web, de forma preeminente, las políticas que siguen - caso de que las tengan - para detectar y combatir el trabajo en esclavitud dentro de su cadena de suministro. Este artículo explora los requisitos del CATSCA y examina la efectividad legal de las normas sobre transparencia de California. DOWNLOAD THIS PAPER FROM SSRN: http

Study of Running Stability in Side-Suspended HTS-PMG Maglev Circular Line System

Science.gov (United States)

Zhou, Dajin; Zhao, Lifeng; Li, Linbo; Cui, Chenyu; Hsieh, Chang-Chun; Zhang, Yong; Guo, Jianqiang; Zhao, Yong

2017-07-01

A research on stability of the side-suspended HTS-PMG maglev circular line system is carried out through simulation experiment. The results show that the maglev vehicle will gradually get close to the track surface during acceleration under the action of centrifugal force, leading to decay of guidance force and occurrence of vertical eccentric motion. In case of linear array of YBa2Cu3O7-x (YBCO) bulks, the guidance force will be changed with the decreasing of the levitation gap. It can be suppressed through the complex arrangement of YBCO bulks. Fortunately, triangle array of YBCO bulks can effectively keep the guidance force constant and realize stable running during accelerating process of the prototype vehicle. Based on the research on stability of side-suspended maglev vehicle, a side-suspended PMG circular test track with diameter of 6.5 m and circumference of 20.4 m is successfully designed and established, enabling the prototype vehicle to run stably at up to 82.5 km/h under open atmosphere (9.6 × 104 Pa).

Physiological and skill demands of 'on-side' and 'off-side' games.

Science.gov (United States)

Gabbett, Tim J; Jenkins, David G; Abernethy, Bruce

2010-11-01

This study investigated the physiological and skill demands of 'on-side' and 'off-side' games in elite rugby league players. Sixteen male rugby league players participated in 'on-side' and 'off-side' games. Both small-sided games were played in a 40- × 40-m playing area. The 'off-side' game permitted players to have 3 'plays' while in possession of the ball. Players were permitted to pass backward or forward (to an 'off-side' player). The 'on-side' game also permitted players to have 3 'plays' while in possession of the ball. However, players were only permitted to pass backward to players in an 'on-side' position. Heart rate and movement patterns (via global positioning system) were recorded continuously throughout both games. Data were collected on the distance covered, number of high-acceleration and velocity efforts, and recovery between efforts. Video footage was also taken to track the performance of the players. Post hoc inspection of the footage was undertaken to count the number of possessions and the number and quality of disposals. In comparison to 'on-side' games, 'off-side' games had a greater number of involvements ("touches"), passes, and effective passes. However, the cognitive demands of 'on-side' games were greater than 'off-side' games. 'Off-side' games resulted in a greater total distance covered, greater distance covered in mild and moderate accelerations, and greater distance covered in low, moderate, and high-velocity efforts. There were also a greater number of short duration recovery periods between efforts in 'off-side' games. The results of this study demonstrate that 'off-side' games provide greater physiological and skill demands than 'on-side' games. 'Off-side' games may provide a practical alternative to 'on-side' games for the development of skill and fitness in elite rugby league players.

Acoustic transparency in two-dimensional sonic crystals

Energy Technology Data Exchange (ETDEWEB)

Sanchez-Dehesa, Jose; Torrent, Daniel [Wave Phenomena Group, Department of Electronic Engineering, Polytechnic University of Valencia, C/ Camino de Vera s/n, E-46022 Valencia (Spain); Cai Liangwu [Department of Mechanical and Nuclear Engineering, Kansas State University, Manhattan, KS 66506 (United States)], E-mail: jsdehesa@upvnet.upv.es

2009-01-15

Acoustic transparency is studied in two-dimensional sonic crystals consisting of hexagonal distributions of cylinders with continuously varying properties. The transparency condition is achieved by selectively closing the acoustic bandgaps, which are governed by the structure factor of the cylindrical scatterers. It is shown here that cylindrical scatterers with the proposed continuously varying properties are physically realizable by using metafluids based on sonic crystals. The feasibility of this proposal is analyzed by a numerical experiment based on multiple scattering theory.

Vertical Mulching e manejo da água em semeadura direta Vertical Mulching and water management in no tillage system

Directory of Open Access Journals (Sweden)

Sandra Maria Garcia

2008-04-01

soil structure degradation, soil compaction below the arable layer, and decreased macroporosity. These changes resulted in reduced soil water infiltration rate and increased runoff, soil erosion and sedimentation in rivers and reservoirs. In the no tillage system the water erosion from the soil surface is practically controlled, and the terraces were eliminated by the farmers. Nevertheless, the surface flow is higher than it was in the conventional tillage system. With the objective of evaluating the hydrological behavior of vertical mulching in no tillage systems as related to runoff, this study was developed in the growing seasons of 2002/2003 and 2003/2004 on a Red Latosol (Oxisol in the Planalto Médio region of Rio Grande do Sul State, Brazil. A field experiment was installed using plots without vertical mulching, with vertical mulching at every 10 m and with vertical mulching at every 5 m. It was used a randomized block design with three replications. Leveled furrows of vertical mulching, perpendicular to the soil slope (0.08 m wide by 0.38 m deep were dug and filled with straw compacted enough to stabilize the furrow sides. Rainfall intensities of 70 and 106 mm h-1 were simulated on soybean and wheat to determine runoff, soil water infiltration rate, and nutrient and organic carbon concentration in the runoff. The results showed that vertical mulching in no tillage significantly reduces surface runoff and increases the water infiltration rate into the soil. It also reduces the total nutrient and organic carbon losses due to the reduction of water runoff.

Transparent electrodes in the terahertz regime – a new approach

DEFF Research Database (Denmark)

Malureanu, Radu; Song, Z.; Zalkovskij, Maksim

We suggest a new possibility for obtaining a transparent metallic film, thus allowing for completely transparent electrodes. By placing a complementary composite layer on top of the electrode, we can cancel the back-scattering of the latter thus obtaining a perfectly transparent structure. For ea...... of fabrication, we performed the first experiments in the THz regime, but the concept is applicable to the entire electromagnetic waves spectrum. We show that the experiments and theory match each other perfectly....

Polyurethanes for potential use in transparent armour investigated using DSC and DMA

NARCIS (Netherlands)

Ekeren, P.J. van; Carton, E.P.

2011-01-01

A material combination that may be applied as transparent armour is glass-clad polyurethane. These are comprised of a relatively thin glass strike face and a relatively thick (transparent) polyurethane backing layer. Three transparent polyurethane samples were investigated using differential

PLB, vertical tail, OMS pods above Earth with moon in distant background

Science.gov (United States)

1983-01-01

Payload bay (PLB) equipment, payloads, and experiments include remote manipulator system (RMS) stowed on port side sill longeron, Development Flight Instrument (DFI) pallet with High Capacity Heat Pipe Experiment, Special Philatelic Covers in two large storage (mail) boxes, Evaluation of Oxygen Interaction with Materials (EOIM) experiment trays, and Advanced Flexible Reusable Surface Insulation (AFRSI) blanket in foreground and Payload Flight Test Article (PFTA) behind DFI pallet. Vertical tail with orbital maneuvering system (OMS) pods at base points to Earth's cloud-covered surface with gibbous moon in distance.

Price Transparency in the Online Age.

Science.gov (United States)

Kaplan, Jonathan L; Mills, Parker H

2016-05-01

Plastic surgeons are sometimes hesitant to provide their pricing information online, due to several concerns. However, if implemented right, price transparency can be used as a lead generation tool that provides consumers with the pricing information they want and gives the physician the consumer's contact information for follow-up. This study took place during the author's first year in private practice in a new city. An interactive price transparency platform (ie, cost estimator) was integrated into his website, allowing consumers to submit a "wishlist" of procedures to check pricing on these procedures of interest. However, the consumer must submit their contact information to receive the desired breakdown of costs that are tailored based on the author's medical fees. During that first year, without any advertising expenditure, the author's website received 412 wishlists from 208 unique consumers. Consumers (17.8%) that submitted a wishlist came in for a consultation and 62% of those booked a procedure. The average value of a booked procedure was over US $4000 and cumulatively, all of the leads from this one lead source in that first year generated over US $92,000 in revenue. When compared with non-price-aware patients, price-aware patients were 41% more likely to book a procedure. Price transparency led to greater efficiency and reduced consultations that ended in "sticker shock." When prudently integrated into a medical practice, price transparency can be a great lead generation source for patients that are (1) paying out of pocket for medically necessary services due to a high-deductible health plan or (2) paying for services not typically covered by insurance, such as cosmetic services.

Side Effects

Science.gov (United States)

Side effects are problems that occur when cancer treatment affects healthy tissues or organs. Learn about side effects caused by cancer treatment. Know what signs and symptoms to call your doctor about. Learn about treatments for side effects.

Sovereign Wealth Funds: Issue of transparency

Directory of Open Access Journals (Sweden)

Petrović Daliborka

2015-01-01

Full Text Available Subject of the paper includes Sovereign Wealth Funds and the formation of the first regulatory framework for their investment activities. Sovereign Wealth Funds invested a significant amount of money in Western financial institutions during the global financial crisis and thus played a crucial role in the preservation and stabilization of the global financial system. However, at the same time, a large gap between the financial power of Sovereign Wealth Funds and the level of their transparency was noted. The need to improve the transparency of Sovereign Wealth Funds has been recognized by international institutions, the OECD and the IMF, which initiated the formulation of the first international regulatory framework regarding the operations of these types of funds. The current international regulatory framework represents a sufficient basis for the gradual improvement of transparency, but because of its non-binding and voluntary nature, certain issues such as the protection of national security interests remain open. Therefore, the solutions can be sought through a process of continuous improvement of international regulation as well as strengthening cooperation between Sovereign Wealth Funds and governments of countries in which they invest.

Protection of children restrained in child safety seats in side impact crashes.

Science.gov (United States)

Arbogast, Kristy B; Locey, Caitlin M; Zonfrillo, Mark R; Maltese, Matthew R

2010-10-01

The performance of child restraint systems (CRS) in side impact motor vehicle crashes has been under study due to the injury and fatality burden of these events. Although previous research has quantified injury risk or described injured body regions, safety advances require an understanding of injury causation. Therefore, the objective was to delineate injury causation scenarios for CRS-restrained children in side impacts and document probable contact points in the vehicle interior. Two in-depth crash investigation databases, the Crash Injury Research and Engineering Network and the Partners for Child Passenger Safety Study, were queried for rear-seated, CRS-restrained children in side impact crashes who sustained Abbreviated Injury Scale 2+ injury. These cases were reviewed by a multidisciplinary team of physicians and engineers to describe injury patterns, injury causation, and vehicle components that contributed to the injuries. Forty-one occupants (average age, 2.6 years) met the inclusion criteria. Twenty-four were near side to the crash, 7 were far side, and 10 were center seated. The most common injuries were to the skull and brain with an increasing proportion of skull fracture as age increased. Head and spine injuries without evidence of head contact were rare but present. All thoracic injuries were lung contusions and no rib fractures occurred. Near-side head and face contacts points were along the rear vertical plane of the window and the horizontal plane of the window sill. Head and face contact points for center- and far-side occupants were along the edges of the front seat back and front seat head restraint. Head injuries are the target for injury prevention for children in CRS in side impact crashes. Most of these injuries are due to the contact; for near-side occupants, contact with the CRS structure and the door interior, for far- or center-seated occupants, contact with the front seat back. These data are useful in developing both educational and

Transparency for international trade

Science.gov (United States)

K. R. Lakin; G. A. Fowler; W. D. Bailey; J. Cavey; P. Lehtonen

2003-01-01

U.S. Department of Agriculture - Animal and Plant Health Inspection Service - Plant Protection and Quarantine (USDA-APHIS-PPQ) has developed a Regulated Plant Pest List (RPPL). This provides trading partners with an official list of plant pests of concern to the U.S., along with providing greater transparency of Agency actions.

A Framework for Security Transparency in Cloud Computing

Directory of Open Access Journals (Sweden)

Umar Mukhtar Ismail

2016-02-01

Full Text Available Individuals and corporate users are persistently considering cloud adoption due to its significant benefits compared to traditional computing environments. The data and applications in the cloud are stored in an environment that is separated, managed and maintained externally to the organisation. Therefore, it is essential for cloud providers to demonstrate and implement adequate security practices to protect the data and processes put under their stewardship. Security transparency in the cloud is likely to become the core theme that underpins the systematic disclosure of security designs and practices that enhance customer confidence in using cloud service and deployment models. In this paper, we present a framework that enables a detailed analysis of security transparency for cloud based systems. In particular, we consider security transparency from three different levels of abstraction, i.e., conceptual, organisation and technical levels, and identify the relevant concepts within these levels. This allows us to provide an elaboration of the essential concepts at the core of transparency and analyse the means for implementing them from a technical perspective. Finally, an example from a real world migration context is given to provide a solid discussion on the applicability of the proposed framework.

Digital photography and transparency-based methods for measuring wound surface area.

Science.gov (United States)

Bhedi, Amul; Saxena, Atul K; Gadani, Ravi; Patel, Ritesh

2013-04-01

To compare and determine a credible method of measurement of wound surface area by linear, transparency, and photographic methods for monitoring progress of wound healing accurately and ascertaining whether these methods are significantly different. From April 2005 to December 2006, 40 patients (30 men, 5 women, 5 children) admitted to the surgical ward of Shree Sayaji General Hospital, Baroda, had clean as well as infected wound following trauma, debridement, pressure sore, venous ulcer, and incision and drainage. Wound surface areas were measured by these three methods (linear, transparency, and photographic methods) simultaneously on alternate days. The linear method is statistically and significantly different from transparency and photographic methods (P value transparency and photographic methods (P value >0.05). Photographic and transparency methods provided measurements of wound surface area with equivalent result and there was no statistically significant difference between these two methods.