System driven technology selection for future European launch systems

Science.gov (United States)

Baiocco, P.; Ramusat, G.; Sirbi, A.; Bouilly, Th.; Lavelle, F.; Cardone, T.; Fischer, H.; Appel, S.

2015-02-01

In the framework of the next generation launcher activity at ESA, a top-down approach and a bottom-up approach have been performed for the identification of promising technologies and alternative conception of future European launch vehicles. The top-down approach consists in looking for system-driven design solutions and the bottom-up approach features design solutions leading to substantial advantages for the system. The main investigations have been focused on the future launch vehicle technologies. Preliminary specifications have been used in order to permit sub-system design to find the major benefit for the overall launch system. The development cost, non-recurring and recurring cost, industrialization and operational aspects have been considered as competitiveness factors for the identification and down-selection of the most interesting technologies. The recurring cost per unit payload mass has been evaluated. The TRL/IRL has been assessed and a preliminary development plan has been traced for the most promising technologies. The potentially applicable launch systems are Ariane and VEGA evolution. The main FLPP technologies aim at reducing overall structural mass, increasing structural margins for robustness, metallic and composite containment of cryogenic hydrogen and oxygen propellants, propellant management subsystems, elements significantly reducing fabrication and operational costs, avionics, pyrotechnics, etc. to derive performing upper and booster stages. Application of the system driven approach allows creating performing technology demonstrators in terms of need, demonstration objective, size and cost. This paper outlines the process of technology down selection using a system driven approach, the accomplishments already achieved in the various technology fields up to now, as well as the potential associated benefit in terms of competitiveness factors.

Analytical method of CIM to PIM transformation in Model Driven Architecture (MDA

Directory of Open Access Journals (Sweden)

Martin Kardos

2010-06-01

Full Text Available Information system’s models on higher level of abstraction have become a daily routine in many software companies. The concept of Model Driven Architecture (MDA published by standardization body OMG1 since 2001 has become a concept for creation of software applications and information systems. MDA specifies four levels of abstraction: top three levels are created as graphical models and the last one as implementation code model. Many research works of MDA are focusing on the lower levels and transformations between each other. The top level of abstraction, called Computation Independent Model (CIM and its transformation to the lower level called Platform Independent Model (PIM is not so extensive research topic. Considering to a great importance and usability of this level in practice of IS2Keywords: transformation, MDA, CIM, PIM, UML, DFD. development now our research activity is focused to this highest level of abstraction – CIM and its possible transformation to the lower PIM level. In this article we are presenting a possible solution of CIM modeling and its analytic method of transformation to PIM.

Shape-Anisotropy Driven Symmetry Transformations in Nanocrystal Superlattice Polymorphs

KAUST Repository

Bian, Kaifu; Choi, Joshua J.; Kaushik, Ananth; Clancy, Paulette; Smilgies, Detlef-M.; Hanrath, Tobias

2011-01-01

Despite intense research efforts by research groups worldwide, the potential of self-assembled nanocrystal superlattices (NCSLs) has not been realized due to an incomplete understanding of the fundamental molecular interactions governing the self-assembly process. Because NCSLs reside naturally at length-scales between atomic crystals and colloidal assemblies, synthetic control over the properties of constituent nanocrystal (NC) building blocks and their coupling in ordered assemblies is expected to yield a new class of materials with remarkable optical, electronic, and vibrational characteristics. Progress toward the formation of suitable test structures and subsequent development of NCSL-based technologies has been held back by the limited control over superlattice spacing and symmetry. Here we show that NCSL symmetry can be controlled by manipulating molecular interactions between ligands bound to the NC surface and the surrounding solvent. Specifically, we demonstrate solvent vapor-mediated NCSL symmetry transformations that are driven by the orientational ordering of NCs within the lattice. The assembly of various superlattice polymorphs, including face-centered cubic (fcc), body-centered cubic (bcc), and body-centered tetragonal (bct) structures, is studied in real time using in situ grazing incidence small-angle X-ray scattering (GISAXS) under controlled solvent vapor exposure. This approach provides quantitative insights into the molecular level physics that controls solvent-ligand interactions and assembly of NCSLs. Computer simulations based on all-atom molecular dynamics techniques confirm several key insights gained from experiment. © 2011 American Chemical Society.

Shape-Anisotropy Driven Symmetry Transformations in Nanocrystal Superlattice Polymorphs

KAUST Repository

Bian, Kaifu

2011-04-26

Despite intense research efforts by research groups worldwide, the potential of self-assembled nanocrystal superlattices (NCSLs) has not been realized due to an incomplete understanding of the fundamental molecular interactions governing the self-assembly process. Because NCSLs reside naturally at length-scales between atomic crystals and colloidal assemblies, synthetic control over the properties of constituent nanocrystal (NC) building blocks and their coupling in ordered assemblies is expected to yield a new class of materials with remarkable optical, electronic, and vibrational characteristics. Progress toward the formation of suitable test structures and subsequent development of NCSL-based technologies has been held back by the limited control over superlattice spacing and symmetry. Here we show that NCSL symmetry can be controlled by manipulating molecular interactions between ligands bound to the NC surface and the surrounding solvent. Specifically, we demonstrate solvent vapor-mediated NCSL symmetry transformations that are driven by the orientational ordering of NCs within the lattice. The assembly of various superlattice polymorphs, including face-centered cubic (fcc), body-centered cubic (bcc), and body-centered tetragonal (bct) structures, is studied in real time using in situ grazing incidence small-angle X-ray scattering (GISAXS) under controlled solvent vapor exposure. This approach provides quantitative insights into the molecular level physics that controls solvent-ligand interactions and assembly of NCSLs. Computer simulations based on all-atom molecular dynamics techniques confirm several key insights gained from experiment. © 2011 American Chemical Society.

Maize transformation technology development for commercial event generation

Science.gov (United States)

Que, Qiudeng; Elumalai, Sivamani; Li, Xianggan; Zhong, Heng; Nalapalli, Samson; Schweiner, Michael; Fei, Xiaoyin; Nuccio, Michael; Kelliher, Timothy; Gu, Weining; Chen, Zhongying; Chilton, Mary-Dell M.

2014-01-01

Maize is an important food and feed crop in many countries. It is also one of the most important target crops for the application of biotechnology. Currently, there are more biotech traits available on the market in maize than in any other crop. Generation of transgenic events is a crucial step in the development of biotech traits. For commercial applications, a high throughput transformation system producing a large number of high quality events in an elite genetic background is highly desirable. There has been tremendous progress in Agrobacterium-mediated maize transformation since the publication of the Ishida et al. (1996) paper and the technology has been widely adopted for transgenic event production by many labs around the world. We will review general efforts in establishing efficient maize transformation technologies useful for transgenic event production in trait research and development. The review will also discuss transformation systems used for generating commercial maize trait events currently on the market. As the number of traits is increasing steadily and two or more modes of action are used to control key pests, new tools are needed to efficiently transform vectors containing multiple trait genes. We will review general guidelines for assembling binary vectors for commercial transformation. Approaches to increase transformation efficiency and gene expression of large gene stack vectors will be discussed. Finally, recent studies of targeted genome modification and transgene insertion using different site-directed nuclease technologies will be reviewed. PMID:25140170

Maize transformation technology development for commercial event generation.

Science.gov (United States)

Que, Qiudeng; Elumalai, Sivamani; Li, Xianggan; Zhong, Heng; Nalapalli, Samson; Schweiner, Michael; Fei, Xiaoyin; Nuccio, Michael; Kelliher, Timothy; Gu, Weining; Chen, Zhongying; Chilton, Mary-Dell M

2014-01-01

Maize is an important food and feed crop in many countries. It is also one of the most important target crops for the application of biotechnology. Currently, there are more biotech traits available on the market in maize than in any other crop. Generation of transgenic events is a crucial step in the development of biotech traits. For commercial applications, a high throughput transformation system producing a large number of high quality events in an elite genetic background is highly desirable. There has been tremendous progress in Agrobacterium-mediated maize transformation since the publication of the Ishida et al. (1996) paper and the technology has been widely adopted for transgenic event production by many labs around the world. We will review general efforts in establishing efficient maize transformation technologies useful for transgenic event production in trait research and development. The review will also discuss transformation systems used for generating commercial maize trait events currently on the market. As the number of traits is increasing steadily and two or more modes of action are used to control key pests, new tools are needed to efficiently transform vectors containing multiple trait genes. We will review general guidelines for assembling binary vectors for commercial transformation. Approaches to increase transformation efficiency and gene expression of large gene stack vectors will be discussed. Finally, recent studies of targeted genome modification and transgene insertion using different site-directed nuclease technologies will be reviewed.

HTML5 and CSS3 transition, transformation and animation

CERN Document Server

Guarini, Gianluca Daniele

2013-01-01

Quick and simple example-driven introduction to HTML5 Transitions, Transformations and Animations. Learn by doing to create some simply amazing HTML5 web applications. If you are a web developer or designer and would love to learn and use the game changing technologies included within HTML5 this is the right book for you, start at the beginning and learn some of this technologies awesome features around transitions, transformations and animations. This book is for beginners with transitions, transformations and animations that want a quick and simple kick start using clear and reusable example

[Rationalities of knowledge production: on transformations of objects, technologies and information in biomedicine and the life sciences].

Science.gov (United States)

Paul, Norbert W

2009-09-01

primarily determined by the desire for knowledge but by the desire for relevance. This paper explores in which ways object-driven and hypotheses-driven experimental life-sciences transformed into domains of experimental research evolving in a technologically constructed, data-driven environment in which they are subjected to constant morphing due to the forces of different rationalities.

Electrically Driven Thermal Management: Flight Validation, Experiment Development, Future Technologies

Science.gov (United States)

Didion, Jeffrey R.

2018-01-01

Electrically Driven Thermal Management is an active research and technology development initiative incorporating ISS technology flight demonstrations (STP-H5), development of Microgravity Science Glovebox (MSG) flight experiment, and laboratory-based investigations of electrically based thermal management techniques. The program targets integrated thermal management for future generations of RF electronics and power electronic devices. This presentation reviews four program elements: i.) results from the Electrohydrodynamic (EHD) Long Term Flight Demonstration launched in February 2017 ii.) development of the Electrically Driven Liquid Film Boiling Experiment iii.) two University based research efforts iv.) development of Oscillating Heat Pipe evaluation at Goddard Space Flight Center.

Solar driven technologies for hydrogen production

Directory of Open Access Journals (Sweden)

Medojević Milovan M.

2016-01-01

Full Text Available Bearing in mind that the production of hydrogen based on renewable energy sources, without doubt, is an important aspect to be taken into account when considering the potential of this gas, where as particularly interesting technologies stand out the ones which are based on the use of solar energy to produce hydrogen. The goal of this paper provides basic technological trajectories, with the possibility of combining, for solar driven hydrogen production, such as: electrochemical, photochemical and thermochemical process. Furthermore, the paper presents an analysis of those technologies from a technical as well as economic point of view. In addition, the paper aims to draw attention to the fact that the generation of hydrogen using renewable energy should be imposed as a logical and proper way to store solar energy in the form of chemical energy.

VMTL: a language for end-user model transformation

DEFF Research Database (Denmark)

Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

2016-01-01

, these languages are largely ill-equipped for adoption by end-user modelers in areas such as requirements engineering, business process management, or enterprise architecture. We aim to introduce a model transformation language addressing the skills and requirements of end-user modelers. With this contribution, we......Model transformation is a key enabling technology of Model-Driven Engineering (MDE). Existing model transformation languages are shaped by and for MDE practitioners—a user group with needs and capabilities which are not necessarily characteristic of modelers in general. Consequently...... hope to broaden the application scope of model transformation and MDE technology in general. We discuss the profile of end-user modelers and propose a set of design guidelines for model transformation languages addressing them. We then introduce Visual Model Transformation Language (VMTL) following...

Elucidate Innovation Performance of Technology-driven Mergers and Acquisitions

Energy Technology Data Exchange (ETDEWEB)

Huang, L.; Wang, K.; Yu, H.; Shang, L.; Mitkova, L.

2016-07-01

The importance and value of Mergers and Acquisitions (M&As) have increased with the expectancy to obtain key technology capabilities and rapid impact on innovation. This article develops an original analytical framework to elucidate the impact of the technology and product relatedness (similarity/complementarity) of the Technology-driven M&A’ partners on post-innovation performance. We present results drawing on a multiple case studies of Chinese High-Tech firms from three industries. (Author)

Role of Reversible Phase Transformation for Strong Piezoelectric Performance at the Morphotropic Phase Boundary

Science.gov (United States)

Liu, Hui; Chen, Jun; Huang, Houbing; Fan, Longlong; Ren, Yang; Pan, Zhao; Deng, Jinxia; Chen, Long-Qing; Xing, Xianran

2018-01-01

A functional material with coexisting energetically equivalent phases often exhibits extraordinary properties such as piezoelectricity, ferromagnetism, and ferroelasticity, which is simultaneously accompanied by field-driven reversible phase transformation. The study on the interplay between such phase transformation and the performance is of great importance. Here, we have experimentally revealed the important role of field-driven reversible phase transformation in achieving enhanced electromechanical properties using in situ high-energy synchrotron x-ray diffraction combined with 2D geometry scattering technology, which can establish a comprehensive picture of piezoelectric-related microstructural evolution. High-throughput experiments on various Pb /Bi -based perovskite piezoelectric systems suggest that reversible phase transformation can be triggered by an electric field at the morphotropic phase boundary and the piezoelectric performance is highly related to the tendency of electric-field-driven phase transformation. A strong tendency of phase transformation driven by an electric field generates peak piezoelectric response. Further, phase-field modeling reveals that the polarization alignment and the piezoelectric response can be much enhanced by the electric-field-driven phase transformation. The proposed mechanism will be helpful to design and optimize the new piezoelectrics, ferromagnetics, or other related functional materials.

Thermal decontamination of transformers: A new technology

International Nuclear Information System (INIS)

Colak, P.Z.

1992-01-01

After evaluating a number of methods for decontaminating or disposing of transformers that contained polychlorinated biphenyls (PCB), it was concluded that no entirely satisfactory procedure or technology was yet available which was permanent, effective, safe, relatively simple, and based on proven technology or conventional practice. The most desirable compromise appears to be thermal decontamination. It is proposed to decontaminate transformers by controlled incineration in a specially designed, indirect-fired furnace which resembles the conventional bell-type, vertical elevator, metal heat treating type of furnace. The design differs in the incorporation of those essential features required to achieve oxidation of the organic components, to provide internal air circulation needed to ensure efficient heat and mass transfer, and other factors. The most appropriate decontamination facility would provide for implementation of the following procedures: draining of PCB-containing liquids from the transformer; limited disassembly of the transformer, which in most instances would imply only removal of the top cover to expose the insides; and controlled incineration with any vapors generated being conducted to a secondary combustion chamber. Experiments were conducted in a kiln to simulate the proposed transformer incinerator. Results show that exposure of the transformer segments to a temperature in the 950-1,000 degree C range for over 90 min is generally sufficient to reduce the PCB content to under 1 ppM. Based on the work conducted, a suitable bell furnace was constructed and added to the Swan Hills (Alberta) waste treatment facility. 2 figs., 3 tabs

Technological features of installation of transformable low-rise buildings from sandwich panels

Directory of Open Access Journals (Sweden)

Pleshivtsev Aleksandr Aleksandrovich

2018-04-01

Full Text Available Subject of research: organizational and technological solutions are considered in the construction of transformable low-rise residential buildings using sandwich panels. Aims: rational choice of organizational and technological solutions for the rhythmic construction of the underground and above-ground part of the transformable low-rise buildings in order to reduce labor costs and construction time. Materials and methods: methods of computer modeling of the technological processes are used to determine the duration of the construction of the low-rise buildings. Results: rational methods for erecting a complex of transformable low-rise buildings are defined, parameters of technological processes are established, an analysis of technological operations is provided for the construction of transformable low-rise residential buildings using sandwich panels. Conclusions: now organizational and technological solutions for the construction of transformable low-rise residential buildings with the use of sandwich panels reduce labour costs, increase the construction pace and as well as the using of improved technological processes in the construction of such buildings leads to a reduction in construction time.

Renewable energy-driven innovative energy-efficient desalination technologies

International Nuclear Information System (INIS)

Ghaffour, Noreddine; Lattemann, Sabine; Missimer, Thomas; Ng, Kim Choon; Sinha, Shahnawaz; Amy, Gary

2014-01-01

Highlights: • Renewable energy-driven desalination technologies are highlighted. • Solar, geothermal, and wind energy sources were explored. • An innovative hybrid approach (combined solar–geothermal) has also been explored. • Innovative desalination technologies developed by our group are discussed. • Climate change and GHG emissions from desalination are also discussed. - Abstract: Globally, the Kingdom of Saudi Arabia (KSA) desalinates the largest capacity of seawater but through energy-intensive thermal processes such as multi-stage flash (MSF) distillation (>10 kW h per m 3 of desalinated water, including electrical and thermal energies). In other regions where fossil energy is more expensive and not subsidized, seawater reverse osmosis (SWRO) is the most common desalination technology but it is still energy-intensive (3–4 kW h e /m 3 ). Both processes therefore lead to the emission of significant amounts of greenhouse gases (GHGs). Moreover, MSF and SWRO technologies are most often used for large desalination facilities serving urban centers with centralized water distribution systems and power grids. While renewable energy (RE) sources could be used to serve centralized systems in urban centers and thus provide an opportunity to make desalination greener, they are mostly used to serve rural communities off of the grid. In the KSA, solar and geothermal energy are of most relevance in terms of local conditions. Our group is focusing on developing new desalination processes, adsorption desalination (AD) and membrane distillation (MD), which can be driven by waste heat, geothermal or solar energy. A demonstration solar-powered AD facility has been constructed and a life cycle assessment showed that a specific energy consumption of <1.5 kW h e /m 3 is possible. An innovative hybrid approach has also been explored which would combine solar and geothermal energy using an alternating 12-h cycle to reduce the probability of depleting the heat source

User driven innovation in mobile technologies?

DEFF Research Database (Denmark)

Larsen, Casper Schultz; Koch, Christian

2007-01-01

by systems already in function. Stories of prior business successes can be an important tool to ensure further innovative investments since lack of enterprise strategies is often an obstacle for innovation, especially user driven. Both small and large software houses develops dedicated software for coupling...... technology systems relying on the concept of affordance. This paper examines how innovation processes mediate between user orientations and technology offers. There is a great potential for mobile handheld ICT-systems to support numerous work processes in the AEC-industry and this can be substantiated...... site practises, and headquarters - inspired by specific user needs for optimizing work processes. The most important mechanisms evoked for creating the mediating found in the paper are ‘hybrids’ where professionals from AEC establishes a software house, developing ICT-products for specific on...

Information technologies and the transformation of nursing education.

Science.gov (United States)

Skiba, Diane J; Connors, Helen R; Jeffries, Pamela R

2008-01-01

Higher education is facing new challenges with the emergence of the Internet and other information and communication technologies. The call for the transformation of higher education is imperative. This article describes the transformation of higher education and its impact on nursing education. Nursing education, considered by many a pioneer in the use of educational technologies, still faces 3 major challenges. The first challenge is incorporation of the Institute of Medicine's recommendation of 5 core competencies for all health professionals. The second challenge focuses on the preparation of nurses to practice in informatics-intensive healthcare environments. The last challenge is the use of emerging technologies, such as Web 2.0 tools, that will help to bridge the gap between the next generation and faculty in nursing schools. Nurse educators need to understand and use the power of technologies to prepare the next generation of nurses.

Piezoelectric Transformers: An Historical Review

Directory of Open Access Journals (Sweden)

Alfredo Vazquez Carazo

2016-04-01

Full Text Available Piezoelectric transformers (PTs are solid-state devices that transform electrical energy into electrical energy by means of a mechanical vibration. These devices are manufactured using piezoelectric materials that are driven at resonance. With appropriate design and circuitry, it is possible to step up and step down the voltages between the input and output sections of the piezoelectric transformer, without making use of magnetic materials and obtaining excellent conversion efficiencies. The initial concept of a piezoelectric ceramic transformer was proposed by Charles A. Rosen in 1954. Since then, the evolution of piezoelectric transformers through history has been linked to the relevant work of some excellent researchers as well as to the evolution in materials, manufacturing processes, and driving circuit techniques. This paper summarizes the historical evolution of the technology.

Model-Driven Engineering of Machine Executable Code

Science.gov (United States)

Eichberg, Michael; Monperrus, Martin; Kloppenburg, Sven; Mezini, Mira

Implementing static analyses of machine-level executable code is labor intensive and complex. We show how to leverage model-driven engineering to facilitate the design and implementation of programs doing static analyses. Further, we report on important lessons learned on the benefits and drawbacks while using the following technologies: using the Scala programming language as target of code generation, using XML-Schema to express a metamodel, and using XSLT to implement (a) transformations and (b) a lint like tool. Finally, we report on the use of Prolog for writing model transformations.

Media business transformation based on information technology : A pilot study of three Swedish newspapers

OpenAIRE

Sadat Alavioon, Samin

2017-01-01

The newspaper industry has been transformed after the emergence of information technology. According to the transformation of media businesses by technology advancement this study realizes the importance of opportunities and threats brought by new information technology in the newspaper industry. Therefore, to develop an understanding of how the newspaper industry can transform due to technology advancement three research questions were answered; RQ 1. How can information technologies transfo...

A Survey on Economic-driven Evaluations of Information Technology

NARCIS (Netherlands)

Mutschler, B.B.; Zarvic, N.; Reichert, M.U.

2007-01-01

The economic-driven evaluation of information technology (IT) has become an important instrument in the management of IT projects. Numerous approaches have been developed to quantify the costs of an IT investment and its assumed profit, to evaluate its impact on business process performance, and to

FENTON-DRIVEN REGENERATION OF GRANULAR ACTIVATED CARBON: A TECHNOLOGY OVERVIEW

Science.gov (United States)

A Fenton-driven mechanism for regenerating spent granular activated carbon (GAC) involves the combined, synergistic use of two reliable and well established treatment technologies - adsorption onto activated carbon and Fenton oxidation. During carbon adsorption treatment, enviro...

[Mandibular-driven simultaneous maxillo-mandibular distraction for hemifacial microsomia with rapid prototyping technology].

Science.gov (United States)

Gao, Quan-Wen; Song, Hui-Feng; Xu, Ming-Huo; Liu, Chun-Ming; Chai, Jia-Ke

2013-11-01

To explore the clinical application of mandibular-driven simultaneous maxillo-mandihular distraction to correct hemifacial microsomia with rapid prototyping technology. The patient' s skull resin model was manufactured with rapid prototyping technology. The osteotomy was designed on skull resin model. According to the preoperative design, the patients underwent Le Fort I osteotomy and mandibular ramus osteotomy. The internal mandible distractor was embedded onto the osteotomy position. The occlusal titanium pin was implanted. Distraction were carried out by mandibular-driven simultaneous maxillo-mandihular distraction 5 days after operation. The distraction in five patients was complete as designed. No infection and dysosteogenesis happened. The longest distance of distraction was 28 mm, and the shortest distance was 16 mm. The facial asymmetry deformity was significantly improved at the end of distraction. The ocelusal plane of patients obviously improved. Rapid prototyping technology is helpful to design precisely osteotomy before operation. Mandibular-driven simultaneous maxillo-mandibular distraction can correct hemifacial microsomia. It is worth to clinical application.

Interactive Information Service Technology of Tea Industry Based on Demand-Driven

OpenAIRE

Shi , Xiaohui; Chen , Tian’en

2013-01-01

International audience; Information service technology is a bridge between user and information resource, also is the critical factor to weight the quality of information service. Focusing on the information service features of tea industry, the demand-driven and interaction of information service were emphasized in this paper. User and market as the major criterion for testing the quality of information service, the interactive information service mode based on the demand-driven was proposed...

Older adults' motivated choice for technological innovation: Evidence for benefit-driven selectivity

NARCIS (Netherlands)

Melenhorst, Anne-Sophie; Rogers, Wendy A.; Bouwhuis, Don G.

2006-01-01

This study examined older adults' motivation to adopt technological innovation. Sixty-eight older e-mail users and nonusers discussed the use of e-mail and of traditional communication methods in 18 focus groups. The results show older adults' benefit-driven approach to new communication technology.

Older adults motivated choice for technological innovation: evidence for benefit-driven selectivity

NARCIS (Netherlands)

Melenhorst, A.S.; Rogers, W.A.; Bouwhuis, D.G.

2006-01-01

This study examined older adults' motivation to adopt technological innovation. Sixty-eight older e-mail users and nonusers discussed the use of e-mail and of traditional communication methods in 18 focus groups. The results show older adults' benefit-driven approach to new communication technology.

Controlled teleportation of a multipartite quantum state via driven QED cavity

International Nuclear Information System (INIS)

Cao Haijing; Song Heshan

2007-01-01

We propose a scheme for teleporting a multipartite quantum state via driven QED cavity technologies. The combined state of Bell states is employed as a quantum channel. By adopting QED cavity technologies, our scheme does not involve the Bell-state measurements and can be perfectly realized by communicators' single particle measurements, possible C-not transformation and classical communication. The probability of successful teleportation can reach 1.0. The theoretical scheme is experimentally feasible via current technologies

The chicken or the egg? Investigating the transformational impact of learning technology

OpenAIRE

Buchan, Janet F.

2011-01-01

This study aimed to investigate the transformational impact of introducing significant new learning technology in an Australian university over the time period 2007–2009. The exploration of this transformation is grounded in a social–ecological systems approach to the management of technology enhanced learning environments in the face of constant change. The transformational impact is described using the Adaptive Cycle Framework. The single case study had a whole-of-institution systems focus....

The role of technology and engineering models in transforming healthcare.

Science.gov (United States)

Pavel, Misha; Jimison, Holly Brugge; Wactlar, Howard D; Hayes, Tamara L; Barkis, Will; Skapik, Julia; Kaye, Jeffrey

2013-01-01

The healthcare system is in crisis due to challenges including escalating costs, the inconsistent provision of care, an aging population, and high burden of chronic disease related to health behaviors. Mitigating this crisis will require a major transformation of healthcare to be proactive, preventive, patient-centered, and evidence-based with a focus on improving quality-of-life. Information technology, networking, and biomedical engineering are likely to be essential in making this transformation possible with the help of advances, such as sensor technology, mobile computing, machine learning, etc. This paper has three themes: 1) motivation for a transformation of healthcare; 2) description of how information technology and engineering can support this transformation with the help of computational models; and 3) a technical overview of several research areas that illustrate the need for mathematical modeling approaches, ranging from sparse sampling to behavioral phenotyping and early detection. A key tenet of this paper concerns complementing prior work on patient-specific modeling and simulation by modeling neuropsychological, behavioral, and social phenomena. The resulting models, in combination with frequent or continuous measurements, are likely to be key components of health interventions to enhance health and wellbeing and the provision of healthcare.

Transformative Learning: Patterns of Psychophysiologic Response and Technology-Enabled Learning and Intervention Systems

Science.gov (United States)

2008-09-01

Psychophysiologic Response and Technology -Enabled Learning and Intervention Systems PRINCIPAL INVESTIGATOR: Leigh W. Jerome, Ph.D...NUMBER Transformative Learning : Patterns of Psychophysiologic Response and Technology - Enabled Learning and Intervention Systems 5b. GRANT NUMBER...project entitled “Transformative Learning : Patterns of Psychophysiologic Response in Technology Enabled Learning and Intervention Systems.” The

The Chicken or the Egg? Investigating the Transformational Impact of Learning Technology

Science.gov (United States)

Buchan, Janet F.

2011-01-01

This study aimed to investigate the transformational impact of introducing significant new learning technology in an Australian university over the time period 2007-2009. The exploration of this transformation is grounded in a social-ecological systems approach to the management of technology enhanced learning environments in the face of constant…

Mobility of Labour, Technological Transformations and the Right to Work.

Science.gov (United States)

Gelpi, Ettore

1985-01-01

The author discusses the macro level of analysis and focuses on the nature of work within the world economy. He examines the cultural characteristics of work, the dynamics of international economic relations, the transformation of international relations, geographical mobility, technological transformation and immigration, professional mobility,…

Digital platforms as enablers for digital transformation

DEFF Research Database (Denmark)

Hossain, Mokter; Lassen, Astrid Heidemann

transformation is crucial. This study aims at exploring how organizations are driven towards transformation in various ways to embrace digital platforms for ideas, technologies, and knowledge. It shows the opportunities and challenges digital platforms bring in organizations. It also highlights underlying......Digital platforms offer new ways for organizations to collaborate with the external environment for ideas, technologies, and knowledge. They provide new possibilities and competence but they also bring new challenges for organizations. Understanding the role of these platforms in digital...... mechanisms and potential outcomes of various digital platforms. The contribution of the submission is valuable for scholars to understand and further explore this area. It provides insight for practitioners to capture value through digital platforms and accelerate the pace of organizations’ digital...

Technological Transformations of Reading Culture

DEFF Research Database (Denmark)

Albrechtslund, Anne-Mette Bech

The increasing use of social media along with the rapidly developing digitization of the book has led to a range of new circumstances for writing, publishing and reading books, resulting in transformations in reading culture and practices. The social aspect of reading is emphasized when readers...... relations in the network of writers, publishers, readers, and reviewers. Similarly, the increasing use of electronic reading devices plays a key role in the acceleration of a culture in which the audience engages with cultural works in new ways. The print book has an “easy materiality” (Marshall, 2010, p....... 17), but with the electronic book, the materiality of reading becomes more ambiguous and malleable as the book as technology is being radically reconstructed. The purpose of this paper is to explore these changes through an investigation into the technology relations (Ihde, 1990) in fiction reading...

Utilization of Information and Communication Technologies in Mathematics Learning

Science.gov (United States)

Saadati, Farzaneh; Tarmizi, Rohani Ahmad; Ayub, Ahmad Fauzi Mohd

2014-01-01

Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students' perception regarding the use of Information and Communication Technologies (ICT)…

Summary of the Accelerator-Driven Transmutation Technologies and their applications

Energy Technology Data Exchange (ETDEWEB)

Wanger, T.P.

1995-10-01

During the past 15 years many advances have been made in the technology of high-power accelerators, and in the understanding of the beam-physics issues associated with their high-performance requirements. These developments have contributed significantly to the high level of confidence in the practicality of the applications that were the central point of the international Accelerator-Driven Transmutation Technologies (ADTT) Conference. Even so, there are many accelerator topics that needed to be addressed, and the Conference provided the opportunity to address these issues.

Facilities & Technology: The Transformation of "Campus." APPA Thought Leaders Series 2015

Science.gov (United States)

APPA: Association of Higher Education Facilities Officers, 2015

2015-01-01

The 2015 Thought Leaders symposium focused on the topic of "Facilities & Technology: The Transformation of 'Campus.'" Educational institutions that master new technologies will have an edge in the increasingly competitive higher education landscape. This report discusses the factors related to integrating technology and the campus…

Transforming Pedagogies:
Integrating 21st Century Skills And Web 2.0 Technology

Directory of Open Access Journals (Sweden)

Shelia Y. TUCKER

2014-01-01

Full Text Available According to (P21, Partnership for 21st Century Skills (n.d., unless the gap is bridged between how students learn and how they live, today’s education system will face irrelevance. The way people work and live has been transformed by demographic, economic, political, technological, and informational forces. Schools must adapt to these changing conditions in order to thrive. Students must be equipped to live in a multifaceted, multitasking, technology-driven world. And, regardless of their economic background, we must also ensure that all students have equal access to this new technological world. Collaborative learning theory which is connected to constructivism pedagogy requires students to work together to solve problems. Students need lifelong learning skills i.e., communication and information skills, problem-solving and thinking skills, and interpersonal and self-directional skills. The challenge becomes to deliberately incorporate learning skills into classrooms strategically and broadly. In this digital age, students must learn to use tools essential to everyday life and workplace productivity. They live in a world of almost unlimited streams of profound information, difficult choices and enormous opportunity. Teachers can create a 21st century context for learning by taking students out into the world, by bringing the world into the classroom, and by creating opportunities for students to collaboratively interact with each other (Learning for the, n.d.. One way of accomplishing this task is by employing the use of the Internet to connect Web 2.0 technology and 21st century skills. These skills are essential due to increased global competition, rising workforce capabilities, and accelerated technological change (Learning for the, n.d..

Transforming in-situ observations of CME-driven shock accelerated protons into the shock's reference frame.

Directory of Open Access Journals (Sweden)

I. M. Robinson

2005-07-01

Full Text Available We examine the solar energetic particle event following solar activity from 14, 15 April 2001 which includes a "bump-on-the-tail" in the proton energy spectra at 0.99 AU from the Sun. We find this population was generated by a CME-driven shock which arrived at 0.99 AU around midnight 18 April. As such this population represents an excellent opportunity to study in isolation, the effects of proton acceleration by the shock. The peak energy of the bump-on-the-tail evolves to progressively lower energies as the shock approaches the observing spacecraft at the inner Lagrange point. Focusing on the evolution of this peak energy we demonstrate a technique which transforms these in-situ spectral observations into a frame of reference co-moving with the shock whilst making allowance for the effects of pitch angle scattering and focusing. The results of this transform suggest the bump-on-the-tail population was not driven by the 15 April activity but was generated or at least modulated by a CME-driven shock which left the Sun on 14 April. The existence of a bump-on-the-tail population is predicted by models in Rice et al. (2003 and Li et al. (2003 which we compare with observations and the results of our analysis in the context of both the 14 April and 15 April CMEs. We find an origin of the bump-on-the-tail at the 14 April CME-driven shock provides better agreement with these modelled predictions although some discrepancy exists as to the shock's ability to accelerate 100 MeV protons.

Keywords. Solar physics, astrophysics and astronomy (Energetic particles; Flares and mass ejections – Space plasma physics (Transport processes

Transformational Technologies to Expedite Space Access and Development

International Nuclear Information System (INIS)

Rather, John D. G.

2010-01-01

Throughout history the emergence of new technologies has enabled unforeseen breakthrough capabilities that rapidly transformed the world. Some global examples from the twentieth century include AC electric power, nuclear energy, and turbojet engines. At the systems level, success of both Apollo and the Space Shuttle programs depended upon taming hydrogen propulsion and developing high-temperature atmospheric reentry materials. Human space development now is stymied because of a great need for breakthrough technologies and strategies. It is believed that new capabilities exist within the present states-of-the-art of superconducting technology that can be implemented to transform the future of human space development. This paper is an overview of three other papers presented within this forum, which summarizes the principles and consequences of StarTram, showing how the resulting breakthrough advantages can lead directly to safe space tourism and massive development of the moon, Mars and the outer solar system. StarTram can implement cost-effective solar power from space, simple utilization of asteroid material to protect humans from ionizing radiation, and effective defense of the Earth from devastating cosmic impacts. Synergistically, StarTram technologies will revolutionize ground transportation on the Earth, leading to enormous reduction in energy consumption and creation of millions of jobs. High energy lasers will also be discussed because of their importance to power beaming applications.

Renewable energy-driven innovative energy-efficient desalination technologies

KAUST Repository

Ghaffour, NorEddine; Lattemann, Sabine; Missimer, Thomas M.; Ng, Kim Choon; Sinha, Shahnawaz; Amy, Gary L.

2014-01-01

Globally, the Kingdom of Saudi Arabia (KSA) desalinates the largest capacity of seawater but through energy-intensive thermal processes such as multi-stage flash (MSF) distillation (>10 kW h per m3 of desalinated water, including electrical and thermal energies). In other regions where fossil energy is more expensive and not subsidized, seawater reverse osmosis (SWRO) is the most common desalination technology but it is still energy-intensive (3-4 kW h_e/m3). Both processes therefore lead to the emission of significant amounts of greenhouse gases (GHGs). Moreover, MSF and SWRO technologies are most often used for large desalination facilities serving urban centers with centralized water distribution systems and power grids. While renewable energy (RE) sources could be used to serve centralized systems in urban centers and thus provide an opportunity to make desalination greener, they are mostly used to serve rural communities off of the grid. In the KSA, solar and geothermal energy are of most relevance in terms of local conditions. Our group is focusing on developing new desalination processes, adsorption desalination (AD) and membrane distillation (MD), which can be driven by waste heat, geothermal or solar energy. A demonstration solar-powered AD facility has been constructed and a life cycle assessment showed that a specific energy consumption of <1.5 kW h_e/m3 is possible. An innovative hybrid approach has also been explored which would combine solar and geothermal energy using an alternating 12-h cycle to reduce the probability of depleting the heat source within the geothermal reservoir and provide the most effective use of RE without the need for energy storage. This paper highlights the use of RE for desalination in KSA with a focus on our group's contribution in developing innovative low energy-driven desalination technologies. © 2014 Elsevier Ltd. All rights reserved.

Renewable energy-driven innovative energy-efficient desalination technologies

KAUST Repository

Ghaffour, Noreddine

2014-04-13

Globally, the Kingdom of Saudi Arabia (KSA) desalinates the largest capacity of seawater but through energy-intensive thermal processes such as multi-stage flash (MSF) distillation (>10 kW h per m3 of desalinated water, including electrical and thermal energies). In other regions where fossil energy is more expensive and not subsidized, seawater reverse osmosis (SWRO) is the most common desalination technology but it is still energy-intensive (3-4 kW h_e/m3). Both processes therefore lead to the emission of significant amounts of greenhouse gases (GHGs). Moreover, MSF and SWRO technologies are most often used for large desalination facilities serving urban centers with centralized water distribution systems and power grids. While renewable energy (RE) sources could be used to serve centralized systems in urban centers and thus provide an opportunity to make desalination greener, they are mostly used to serve rural communities off of the grid. In the KSA, solar and geothermal energy are of most relevance in terms of local conditions. Our group is focusing on developing new desalination processes, adsorption desalination (AD) and membrane distillation (MD), which can be driven by waste heat, geothermal or solar energy. A demonstration solar-powered AD facility has been constructed and a life cycle assessment showed that a specific energy consumption of <1.5 kW h_e/m3 is possible. An innovative hybrid approach has also been explored which would combine solar and geothermal energy using an alternating 12-h cycle to reduce the probability of depleting the heat source within the geothermal reservoir and provide the most effective use of RE without the need for energy storage. This paper highlights the use of RE for desalination in KSA with a focus on our group\\'s contribution in developing innovative low energy-driven desalination technologies. © 2014 Elsevier Ltd. All rights reserved.

Innovative use of the integrative review to evaluate evidence of technology transformation in healthcare.

Science.gov (United States)

Phillips, Andrew B; Merrill, Jacqueline A

2015-12-01

Healthcare is in a period significant transformational activity through the accelerated adoption of healthcare technologies, new reimbursement systems that emphasize shared savings and care coordination, and the common place use of mobile technologies by patients, providers, and others. The complexity of healthcare creates barriers to transformational activity and has the potential to inhibit the desired paths toward change envisioned by policymakers. Methods for understanding how change is occurring within this complex environment are important to the evaluation of delivery system reform and the role of technology in healthcare transformation. This study examines the use on an integrative review methodology to evaluate the healthcare literature for evidence of technology transformation in healthcare. The methodology integrates the evaluation of a broad set of literature with an established evaluative framework to develop a more complete understanding of a particular topic. We applied this methodology and the framework of punctuated equilibrium (PEq) to the analysis of the healthcare literature from 2004 to 2012 for evidence of technology transformation, a time during which technology was at the forefront of healthcare policy. The analysis demonstrated that the established PEq framework applied to the literature showed considerable potential for evaluating the progress of policies that encourage healthcare transformation. Significant inhibitors to change were identified through the integrative review and categorized into ten themes that describe the resistant structure of healthcare delivery: variations in the environment; market complexity; regulations; flawed risks and rewards; change theories; barriers; ethical considerations; competition and sustainability; environmental elements, and internal elements. We hypothesize that the resistant nature of the healthcare system described by this study creates barriers to the direct consumer involvement and engagement

Molecular dynamics for irradiation driven chemistry: application to the FEBID process*

Science.gov (United States)

Sushko, Gennady B.; Solov'yov, Ilia A.; Solov'yov, Andrey V.

2016-10-01

A new molecular dynamics (MD) approach for computer simulations of irradiation driven chemical transformations of complex molecular systems is suggested. The approach is based on the fact that irradiation induced quantum transformations can often be treated as random, fast and local processes involving small molecules or molecular fragments. We advocate that the quantum transformations, such as molecular bond breaks, creation and annihilation of dangling bonds, electronic charge redistributions, changes in molecular topologies, etc., could be incorporated locally into the molecular force fields that describe the classical MD of complex molecular systems under irradiation. The proposed irradiation driven molecular dynamics (IDMD) methodology is designed for the molecular level description of the irradiation driven chemistry. The IDMD approach is implemented into the MBN Explorer software package capable to operate with a large library of classical potentials, many-body force fields and their combinations. IDMD opens a broad range of possibilities for modelling of irradiation driven modifications and chemistry of complex molecular systems ranging from radiotherapy cancer treatments to the modern technologies such as focused electron beam deposition (FEBID). As an example, the new methodology is applied for studying the irradiation driven chemistry caused by FEBID of tungsten hexacarbonyl W(CO)6 precursor molecules on a hydroxylated SiO2 surface. It is demonstrated that knowing the interaction parameters for the fragments of the molecular system arising in the course of irradiation one can reproduce reasonably well experimental observations and make predictions about the morphology and molecular composition of nanostructures that emerge on the surface during the FEBID process.

The Student Perspective: Can the Use of Technologies Transform Learning?

OpenAIRE

O'Donnell, Eileen

2010-01-01

PUBLISHED This chapter explores students? perspectives on the transformations that the use of technology has brought to higher education. The use of technologies in higher education facilitates flexible learning environments but the benefits to students who engage with these technologies will only be realised if the design is pedagogically sound. The pedagogic approach employed by lecturers when designing their e-learning platforms or learning management systems has the cap...

Game Changing Transformable Entry System Technology Applicability to Robotic Venus Science Missions

Data.gov (United States)

National Aeronautics and Space Administration — The innovative adpative deployable entry and placement technology (ADEPT), also known as transformable entry system technology (TEST) concept, akin to an umbrella,...

Moving Teaching and Learning with Technology from Adoption to Transformation

Science.gov (United States)

Hartman, Joel L.

2008-01-01

Information technology has been an important part of higher education since the development of the lantern slide in the mid-1800s. However, occasions in which the academy has been "transformed" by technology are rare. Viewed in a historical perspective, these occasions can be considered as a series of three epochs: the online public-access catalog…

Technology-driven online marketing performance measurement: lessons from affiliate marketing

OpenAIRE

Bowie, David; Paraskevas, Alexandros; Mariussen, Anastasia

2014-01-01

Although the measurement of offline and online marketing is extensively researched, the literature on online performance measurement still has a number of limitations such as slow theory advancement and predominance of technology- and practitioner-driven measurement approaches. By focusing on the widely employed but under-researched affiliate marketing channel, this study addresses these limitations and evaluates the effectiveness of practitioner-led online performance assessment. The paper o...

Six Sigma Driven Enterprise Model Transformation

Directory of Open Access Journals (Sweden)

Raymond Vella

2009-10-01

Full Text Available Enterprise architecture methods provide a structured system to understand enterprise activities. However, existing enterprise modelling methodologies take static views of the enterprise and do not naturally lead to a path of improvement during enterprise model transformation. This paper discusses the need for a methodology to facilitate changes for improvement in an enterprise. The six sigma methodology is proposed as the tool to facilitate progressive and continual Enterprise Model Transformation to allow businesses to adapt to meet increased customer expectation and global competition. An alignment of six sigma with phases of GERAM life cycle is described with inclusion of Critical-To-Satisfaction (CTS requirements. The synergies of combining the two methodologies are presented in an effort to provide a more culturally embedded framework for Enterprise Model Transformation that builds on the success of six sigma.

Molecular dynamics for irradiation driven chemistry

DEFF Research Database (Denmark)

Sushko, Gennady B.; Solov'yov, Ilia A.; Solov'yov, Andrey V.

2016-01-01

A new molecular dynamics (MD) approach for computer simulations of irradiation driven chemical transformations of complex molecular systems is suggested. The approach is based on the fact that irradiation induced quantum transformations can often be treated as random, fast and local processes...... that describe the classical MD of complex molecular systems under irradiation. The proposed irradiation driven molecular dynamics (IDMD) methodology is designed for the molecular level description of the irradiation driven chemistry. The IDMD approach is implemented into the MBN Explorer software package...... involving small molecules or molecular fragments. We advocate that the quantum transformations, such as molecular bond breaks, creation and annihilation of dangling bonds, electronic charge redistributions, changes in molecular topologies, etc., could be incorporated locally into the molecular force fields...

Electrically driven hybrid Si/III-V Fabry-Pérot lasers based on adiabatic mode transformers.

Science.gov (United States)

Ben Bakir, B; Descos, A; Olivier, N; Bordel, D; Grosse, P; Augendre, E; Fulbert, L; Fedeli, J M

2011-05-23

We report the first demonstration of an electrically driven hybrid silicon/III-V laser based on adiabatic mode transformers. The hybrid structure is formed by two vertically superimposed waveguides separated by a 100-nm-thick SiO2 layer. The top waveguide, fabricated in an InP/InGaAsP-based heterostructure, serves to provide optical gain. The bottom Si-waveguides system, which supports all optical functions, is constituted by two tapered rib-waveguides (mode transformers), two distributed Bragg reflectors (DBRs) and a surface-grating coupler. The supermodes of this hybrid structure are controlled by an appropriate design of the tapers located at the edges of the gain region. In the middle part of the device almost all the field resides in the III-V waveguide so that the optical mode experiences maximal gain, while in regions near the III-V facets, mode transformers ensure an efficient transfer of the power flow towards Si-waveguides. The investigated device operates under quasi-continuous wave regime. The room temperature threshold current is 100 mA, the side-mode suppression ratio is as high as 20 dB, and the fiber-coupled output power is ~7 mW.

Advances in pulsed-power-driven radiography system design

International Nuclear Information System (INIS)

Portillo, Salvador; Hinshelwood, David D.; Rovang, Dean Curtis; Cordova, Steve Ray; Oliver, Bryan Velten; Weber, Bruce V.; Welch, Dale Robert; Shelton, Bradley Allen; Sceiford, Matthew E.; Cooperstein, Gerald; Gignac, Raymond Edward; Puetz, Elizabeth A.; Rose, David Vincent; Barker, Dennis L.; Van De Valde, David M.; Droemer, Darryl W.; Wilkins, Frank Lee; Molina, Isidro; Jaramillo, Deanna M.; Swanekamp, Stephen Brian; Commisso, Robert J.; Bailey, Vernon Leslie; Maenchen, John Eric; Johnson, David Lee; Griffin, Fawn A.; Hahn, Kelly Denise; Smith, Ian

2004-01-01

Flash x-ray radiography has undergone a transformation in recent years with the resurgence of interest in compact, high intensity pulsed-power-driven electron beam sources. The radiographic requirements and the choice of a consistent x-ray source determine the accelerator parameters, which can be met by demonstrated Induction Voltage Adder technologies. This paper reviews the state of the art and the recent advances which have improved performance by over an order of magnitude in beam brightness and radiographic utility.

TRANSFORMATION OF ECONOMY IN THE CONDITIONS OF FORMING THE NATIONAL TECHNOLOGICAL INITIATIVE

Directory of Open Access Journals (Sweden)

Elena Sibirskaya

2017-12-01

Full Text Available The relevance of the study is conditioned by the need for a clear idea about the upcoming transformation of the Russian economy for implementing the national technology initiative (NTI. Today, Russia is facing a “challenge of development”, which determines the necessity of transition to breakthrough scientific and technological development as a major strategic objective for the future, which definitely determines further socio-economic development. In his address to the Federal Assembly of December 4, 2014, Russian President Vladimir Putin outlined the National technology initiative to be one of the priorities of state policy. “On the basis of long-term forecasting it is necessary to understand what challenges Russia will face in 10-15 years, what advanced solutions will be required in order to ensure national security, high quality of life, development of new technological order” (from the message to the Federal Assembly [6]. The response to this challenge is the National technology initiative, aimed at developing a robust creative and business environment that allows to convert technological breakthroughs to new markets into an element of the system of continuous reproduction of income, human and technological capital. Information base of the research includes legal documents of the Government of the Russian Federation, the official publications under the project office of STI, reports of Russian Academy of Sciences, developments of the Expert Council under the government of the Russian Federation and Agency for strategic initiatives, Federal Agency of scientific organizations, research groups, individual scientists and specialists, Internet resources and the authors’ own developments. The first systematic and methodologically coherent statement of the ideology of economy transformation in the conditions of forming national technological initiative is presented in the report “Framework of the National technology initiative” of

EMSP Final Report: Electrically Driven Technologies for Radioactive Aerosol Abatement

Energy Technology Data Exchange (ETDEWEB)

DePaoli, D.W.

2003-01-22

The purpose of this research project was to develop an improved understanding of how electrically driven processes, including electrocoalescence, acoustic agglomeration, and electric filtration, may be employed to efficiently treat problems caused by the formation of aerosols during DOE waste treatment operations. The production of aerosols during treatment and retrieval operations in radioactive waste tanks and during thermal treatment operations such as calcination presents a significant problem of cost, worker exposure, potential for release, and increased waste volume. There was anecdotal evidence in the literature that acoustic agglomeration and electrical coalescence could be used together to change the size distribution of aerosol particles in such a way as to promote easier filtration and less frequent maintenance of filtration systems. As such, those electrically driven technologies could potentially be used as remote technologies for improved treatment; however, existing theoretical models are not suitable for prediction and design. To investigate the physics of such systems, and also to prototype a system for such processes, a collaborative project was undertaken between Oak Ridge National Laboratory (ORNL) and the University of Texas at Austin (UT). ORNL was responsible for the larger-scale prototyping portion of the project, while UT was primarily responsible for the detailed physics in smaller scale unit reactors. It was found that both electrical coalescence and acoustic agglomeration do in fact increase the rate of aggregation of aerosols. Electrical coalescence requires significantly less input power than acoustic agglomeration, but it is much less effective in its ability to aggregate/coalesce aerosols. The larger-scale prototype showed qualitatively similar results as the unit reactor tests, but presented more difficulty in interpretation of the results because of the complex multi-physics coupling that necessarily occur in all larger

Computer Technology for Expediency Consideration of Transformer Switching-Off for Capital Repair

Directory of Open Access Journals (Sweden)

E. M. Farkhadzade

2011-01-01

Full Text Available The paper considers computer technologies for expediency consideration of worn-out transformer recovery in power systems. Methods for list preparation of transformers to be selected for capital repair, estimation of repair quality, control over execution of contractual obligations are presented in the paper.

Separations technology development to support accelerator-driven transmutation concepts

International Nuclear Information System (INIS)

Venneri, F.; Arthur, E.; Bowman, C.

1996-01-01

This is the final report of a one-year Laboratory-Directed Research and Development (LDRD) Project at the Los Alamos National Laboratory (LANL). This project investigated separations technology development needed for accelerator-driven transmutation technology (ADTT) concepts, particularly those associated with plutonium disposition (accelerator-based conversion, ABC) and high-level radioactive waste transmutation (accelerator transmutation of waste, ATW). Specific focus areas included separations needed for preparation of feeds to ABC and ATW systems, for example from spent reactor fuel sources, those required within an ABC/ATW system for material recycle and recovery of key long-lived radionuclides for further transmutation, and those required for reuse and cleanup of molten fluoride salts. The project also featured beginning experimental development in areas associated with a small molten-salt test loop and exploratory centrifugal separations systems

User Interface Technology to Reduce Mental Transformations for Tangible Remote Dismantling Simulator

Energy Technology Data Exchange (ETDEWEB)

Hyun, Dongjun; Kim, Ikjune; Lee, Jonghwan; Kim, Geun-Ho; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon; Choi, Jong-Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

High-level radiation of the major components restricts access by human workers, and makes an accident or outage during the dismantling process more difficult to deal with. Since unexpected situations causes waste of budget and an aggravation of safety, the preliminary verification of the dismantling processes and equipment by the tangible remote dismantling simulator is very important. The design optimization of the dismantling processes and equipment is one of the most important objectives of the tangible remote dismantling simulator, as well. This paper proposes a user interface technology to reduce mental transformations for the tangible remote dismantling simulator. At the dismantling process simulation using the tangible remote dismantling simulator, the most difficult work is the remote operation handling the high degrees-of-freedom (DOF) manipulator due to complex mental transformations. The proposed user interface technology reduces mental transformations with constraints using the point projection and direction projection. The test result of the cutting process over the closure head of the RPV demonstrates that the proposed mental transformation reduction technology is operated successfully in the tangible remote dismantling simulator, and lets the operator be easy to control the high DOF manipulator even in the most difficult operation by reducing DOFs to be controlled manually.

User Interface Technology to Reduce Mental Transformations for Tangible Remote Dismantling Simulator

International Nuclear Information System (INIS)

Hyun, Dongjun; Kim, Ikjune; Lee, Jonghwan; Kim, Geun-Ho; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon; Choi, Jong-Won

2015-01-01

High-level radiation of the major components restricts access by human workers, and makes an accident or outage during the dismantling process more difficult to deal with. Since unexpected situations causes waste of budget and an aggravation of safety, the preliminary verification of the dismantling processes and equipment by the tangible remote dismantling simulator is very important. The design optimization of the dismantling processes and equipment is one of the most important objectives of the tangible remote dismantling simulator, as well. This paper proposes a user interface technology to reduce mental transformations for the tangible remote dismantling simulator. At the dismantling process simulation using the tangible remote dismantling simulator, the most difficult work is the remote operation handling the high degrees-of-freedom (DOF) manipulator due to complex mental transformations. The proposed user interface technology reduces mental transformations with constraints using the point projection and direction projection. The test result of the cutting process over the closure head of the RPV demonstrates that the proposed mental transformation reduction technology is operated successfully in the tangible remote dismantling simulator, and lets the operator be easy to control the high DOF manipulator even in the most difficult operation by reducing DOFs to be controlled manually

Older adults' motivated choice for technological innovation: evidence for benefit-driven selectivity.

Science.gov (United States)

Melenhorst, Anne-Sophie; Rogers, Wendy A; Bouwhuis, Don G

2006-03-01

This study examined older adults' motivation to adopt technological innovation. Sixty-eight older e-mail users and nonusers discussed the use of e-mail and of traditional communication methods in 18 focus groups. The results show older adults' benefit-driven approach to new communication technology. Regardless of whether their decision about the new technology was positive or negative and irrespective of their e-mail experience, participants focused on benefits rather than costs. For traditional media, both costs and benefits were important. Results contradict the common belief that barriers such as usability problems determine whether older people use new technology and indicate the decisive role of perceived benefits for successful innovation. ((c) 2006 APA, all rights reserved).

Optimization of accelerator-driven technology for LWR waste transmutation

International Nuclear Information System (INIS)

Bowman, C.D.

1996-01-01

The role of accelerator-driven transmutation technology is examined in the context of the destruction of actinide waste from commercial light water reactors. It is pointed out that the commercial plutonium is much easier to use for entry-level nuclear weapons than weapons plutonium. Since commercial plutonium is easier to use, since there is very much more of it already, and since it is growing rapidly, the permanent disposition of commercial plutonium is an issue of greater importance than weapons plutonium. The minor actinides inventory, which may be influenced by transmutation, is compared in terms of nuclear properties with commercial and weapons plutonium and for possible utility as weapons material. Fast and thermal spectrum systems are compared as means for destruction of plutonium and the minor actinides. it is shown that the equilibrium fast spectrum actinide inventory is about 100 times larger than for thermal spectrum systems, and that there is about 100 times more weapons-usable material in the fast spectrum system inventory compared to the thermal spectrum system. Finally it is shown that the accelerator size for transmutation can be substantially reduced by design which uses the accelerator-produced neutrons only to initiate the unsustained fission chains characteristic of the subcritical system. The analysis argues for devoting primary attention to the development of thermal spectrum transmutation technology. A thermal spectrum transmuter operating at a fission power of 750-MWth fission power, which is sufficient to destroy the actinide waste from one 3,000-MWth light water reactor, may be driven by a proton beam of 1 GeV energy and a current of 7 mA. This accelerator is within the range of realizable cyclotron technology and is also near the size contemplated for the next generation spallation neutron source under consideration by the US, Europe, and Japan

Infusing Technology Driven Design Thinking in Industrial Design Education: A Case Study

Science.gov (United States)

Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

2017-01-01

Purpose: This paper narrates a case study on design thinking-based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user-driven innovation strategies. Design/methodology/approach: A renewed…

Organizational technologies for transforming care: measures and strategies for pursuit of IOM quality aims.

Science.gov (United States)

Gamm, Larry; Kash, Bita; Bolin, Jane

2007-01-01

Progress on the Institute of Medicine's (IOM's) 6 aims to bridge the "quality chasm" requires both measurement and the concerting of multiple organizational technologies. The basic thesis of this article is that rapid progress on the IOM's multiple aims calls for transformative change within and among healthcare organizations. The promise of a number of types of transformative approaches is closely linked to their ability to simultaneously build upon several organizational technologies: clinical, social, information, and administrative technologies. To encourage and advance such efforts, this article identifies illustrative measures of attainment of the IOM's 6 aims or targeted areas for improvement that reflect the contributions of the 4 organizational technologies. It discusses examples of relationships between the IOM aims and the organizational technologies considered. Finally, the article offers illustrations of the interplay of these organizational technologies and IOM aims-across an array of organizational innovations with transformative potential. Included among such innovations are information technology in the form of electronic medical records, computer-based physician order entry, and patient health records; organization-wide patient-centered cultural change such as Studer's Hardwiring Excellence; Six Sigma and Toyota Production Management/LEAN; major clinical technology change, for example, minimally invasive cardiac surgery and broader treatment innovations such as disease management.

Deformation Driven Alloying and Transformation

Science.gov (United States)

2015-03-03

process is a repeated deformation and welding or folding of particles or layers that allows for strain levels in excess of 100 as shown in Fig.1. The...complete transformation yielded a duplex product of metastable BCC and FCC solid solutions. Another form of mechanochemical transduction is

How do dynamic capabilities transform external technologies into firms’ renewed technological resources? – A mediation model

DEFF Research Database (Denmark)

Li-Ying, Jason; Wang, Yuandi; Ning, Lutao

2016-01-01

microfoundations of dynamic technological capabilities, mediate the relationship between external technology breadth and firms’ technological innovation performance, based on the resource-based view and dynamic capability view. Using a sample of listed Chinese licensee firms, we find that firms must broadly......How externally acquired resources may become valuable, rare, hard-to-imitate, and non-substitute resource bundles through the development of dynamic capabilities? This study proposes and tests a mediation model of how firms’ internal technological diversification and R&D, as two distinctive...... explore external technologies to ignite the dynamism in internal technological diversity and in-house R&D, which play their crucial roles differently to transform and reconfigure firms’ technological resources....

Transforming dose management techniques through technology

International Nuclear Information System (INIS)

Bennett, M.

1995-01-01

The management of occupational dose exposure has been transformed in recent years though the use of facilities such as computerised databases, remote instrumentation and electronic data transfer. Use of this technology has allowed increases both in the amount of data capable of being processed and in the speed at which the data is made available to operators and Health Physics personnel. The dose management system being used in support of the UK's naval nuclear plants has incorporated advances in the areas of dosimetry, data handling and data analysis. Physical dispersion of sites servicing the nuclear plants means that effective communication links have also been vital for good dose management. This paper focuses on some of the most recent dose management technology - the use of virtual reality models linked with a predictive computer code for work planning, a remote area monitoring system with diagnostic software, a personnel dosimetry telemetry system, and electronically linked computer databases. (author)

Value co-creation platform design within the context of technology-driven businesses

Science.gov (United States)

Tanev, Stoyan; Ruskov, Petko

2010-02-01

The article provides a discussion of value co-creation platforms within the context of technology driven business. It emphasizes the need for a terminological refinement of the value co-creation paradigm as well as for an articulation of its implications for the design and reconfiguration of the company value network.

Patient safety and technology-driven medication e A qualitative study on how graduate nursing students navigate through complex medication administration

DEFF Research Database (Denmark)

Orbæk, Janne; Gaard, Mette; Fabricius, Pia

2014-01-01

ways of educating nursing students in today's medication administration. Aim: To explore nursing students' experiences and competences with the technology-driven medication administration process. Methods: 16 pre-graduate nursing students were included in two focus group interviews which were recorded...... for the technology-driven medication process, nursing students face difficulties in identifying and adopting best practices. The impact of using technology on the frequency, type and severity of medication errors; the technologies implications on nursing professionalism and the nurses ability to secure patient...

Growth and Structural Transformation in Viet Nam during the 2000s

DEFF Research Database (Denmark)

Thu Hoai, Dang Thi; Tarp, Finn; van Seventer, Dirk

the period 2000–12, while moving from primary production (agriculture) towards more value adding manufacturing activities. This transformation has been broad-based and in large measure driven by external demand. We conclude that it will be challenging to sustain growth without bold moves in technological......We study structural transformation and change in the Vietnamese economy using two Social Accounting Matrices (SAMs), one for the year 2000 and a recently compiled SAM for the year 2012. This period is of particular interest as it features an important shift in terms of more economic integration...

Automatic Transformation of MPI Programs to Asynchronous, Graph-Driven Form

Energy Technology Data Exchange (ETDEWEB)

Baden, Scott B [University of California, San Diego; Weare, John H [University of California, San Diego; Bylaska, Eric J [Pacific Northwest National Laboratory

2013-04-30

The goals of this project are to develop new, scalable, high-fidelity algorithms for atomic-level simulations and program transformations that automatically restructure existing applications, enabling them to scale forward to Petascale systems and beyond. The techniques enable legacy MPI application code to exploit greater parallelism though increased latency hiding and improved workload assignment. The techniques were successfully demonstrated on high-end scalable systems located at DOE laboratories. Besides the automatic MPI program transformations efforts, the project also developed several new scalable algorithms for ab-initio molecular dynamics, including new massively parallel algorithms for hybrid DFT and new parallel in time algorithms for molecular dynamics and ab-initio molecular dynamics. These algorithms were shown to scale to very large number of cores, and they were designed to work in the latency hiding framework developed in this project. The effectiveness of the developments was enhanced by the direct application to real grand challenge simulation problems covering a wide range of technologically important applications, time scales and accuracies. These included the simulation of the electronic structure of mineral/fluid interfaces, the very accurate simulation of chemical reactions in microsolvated environments, and the simulation of chemical behavior in very large enzyme reactions.

Comparing Transformation Possibilities of Topological Functioning Model and BPMN in the Context of Model Driven Architecture

Directory of Open Access Journals (Sweden)

Solomencevs Artūrs

2016-05-01

Full Text Available The approach called “Topological Functioning Model for Software Engineering” (TFM4SE applies the Topological Functioning Model (TFM for modelling the business system in the context of Model Driven Architecture. TFM is a mathematically formal computation independent model (CIM. TFM4SE is compared to an approach that uses BPMN as a CIM. The comparison focuses on CIM modelling and on transformation to UML Sequence diagram on the platform independent (PIM level. The results show the advantages and drawbacks the formalism of TFM brings into the development.

Highly selective transformation of ammonia nitrogen to N2 based on a novel solar-driven photoelectrocatalytic-chlorine radical reactions system.

Science.gov (United States)

Ji, Youzhi; Bai, Jing; Li, Jinhua; Luo, Tao; Qiao, Li; Zeng, Qingyi; Zhou, Baoxue

2017-11-15

A highly selective method for transforming ammonia nitrogen to N 2 was proposed, based on a novel solar-driven photoelectrocatalytic-chlorine radical reactions (PEC-chlorine) system. The PEC-chlorine system was facilitated by a visible light response WO 3 nanoplate array (NPA) electrode in an ammonia solution containing chloride ions (Cl - ). Under illumination, photoholes from WO 3 promote the oxidation of Cl - to chlorine radical (Cl). This radical can selectively transform ammonia nitrogen to N 2 (79.9%) and NO 3 - (19.2%), similar to the breakpoint chlorination reaction. The ammonia nitrogen removal efficiency increased from 10.6% (PEC without Cl - ) to 99.9% with the PEC-chlorine system within 90 min operation, which can be attributed to the cyclic reactions between Cl - /Cl and the reaction intermediates (NH 2 , NHCl, etc.) that expand the degradation reactions from the surface of the electrodes to the whole solution system. Moreover, Cl is the main radical species contributing to the transformation of ammonia nitrogen to N 2 , which is confirmed by the tBuOH capture experiment. Compared to conventional breakpoint chlorination, the PEC-chlorine system is a more economical and efficient means for ammonia nitrogen degradation because of the fast removal rate, no additional chlorine cost, and its use of clean energy (since it is solar-driven). Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects-Driven IT Development

DEFF Research Database (Denmark)

Hertzum, Morten; Simonsen, Jesper

2010-01-01

We present effects-driven IT development as an instrument for pursuing and reinforcing Participatory Design (PD) when it is applied in commercial information technology (IT) projects. Effects-driven IT development supports the management of a sustained PD process throughout design and organizatio......We present effects-driven IT development as an instrument for pursuing and reinforcing Participatory Design (PD) when it is applied in commercial information technology (IT) projects. Effects-driven IT development supports the management of a sustained PD process throughout design...

Transforming health care the financial impact of technology, electronic tools and data mining

CERN Document Server

Fasano, Phil

2013-01-01

The future of healthcare technologies, and what they mean for investors and entrepreneurs The healthcare technology revolution is just around the corner. And when it arrives, it will change and enrich our lives in ways we can only begin to imagine. Doctors will perform blood pressure readings via video chat and nutritionists will analyze diet based on photos taken with cellphone cameras. Transforming Health Care combines healthcare, technology, and finance in an innovative new way that explains the future of healthcare and its effects on patient care, exploring the emergence of electronic tools that will transform the medical industry. Explaining how technology, not politics, will lead the future of the healthcare revolution, author and healthcare technology expert Phil Fasano presents real-life examples that show how the next generation of medical breakthroughs will come from the instant exchange of information across the world Explores how new technologies will radically change the future of healthcare by m...

Patient safety and technology-driven medication - A qualitative study on how graduate nursing students navigate through complex medication administration.

Science.gov (United States)

Orbæk, Janne; Gaard, Mette; Fabricius, Pia; Lefevre, Rikke S; Møller, Tom

2015-05-01

The technology-driven medication process is complex, involving advanced technologies, patient participation and increased safety measures. Medication administration errors are frequently reported, with nurses implicated in 26-38% of in-hospital cases. This points to the need for new ways of educating nursing students in today's medication administration. To explore nursing students' experiences and competences with the technology-driven medication administration process. 16 pre-graduate nursing students were included in two focus group interviews which were recorded, transcribed and analyzed using the systematic horizontal phenomenological-hermeneutic template methodology. The interviews uncovered that understanding the technologies; professionalism and patient safety are three crucial elements in the medication process. The students expressed positivity and confidence in using technology, but were fearful of committing serious medication errors. From the nursing students' perspective, experienced nurses deviate from existing guidelines, leaving them feeling isolated in practical learning situations. Having an unclear nursing role model for the technology-driven medication process, nursing students face difficulties in identifying and adopting best practices. The impact of using technology on the frequency, type and severity of medication errors; the technologies implications on nursing professionalism and the nurses ability to secure patient adherence to the medication process, still remains to be studied. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Transforming Electricity System: Understanding the Interactions Between Clean Energy Technologies, Markets, and Policies

Science.gov (United States)

Mooney, David

The U.S. electricity system is currently undergoing a dramatic transformation. State-level renewable portfolio standards, abundant natural gas at low prices, and rapidly falling prices for wind and solar technologies are among the factors that have ushered in this transformation. With objective, rigorous, technology-neutral analysis, NREL aims to increase the understanding of energy policies, markets, resources, technologies, and infrastructure and their connections with economic, environmental, and security priorities. The results of these analyses are meant to inform R&D, policy, and investment decisions as energy-efficient and renewable energy technologies advance from concept to commercial application to market penetration. This talk will provide an overview of how NREL uses high-fidelity data, deep knowledge of energy technology cost and performance, and advanced models and tools to provide the information needed to ensure this transformation occurs economically, while maintaining system reliability. Examples will be explored and will include analysis of tax credit impacts on wind and solar deployment and power sector emissions, as well as analysis of power systems operations in the Eastern Interconnection under 30% wind and solar penetration scenarios. Invited speaker number 47185.

Transforming Knowledge Creation: An Action Framework for Library Technology Diversity

Directory of Open Access Journals (Sweden)

Barbara I. Dewey

2015-04-01

Full Text Available This paper will articulate an action framework for library technology diversity consisting of five dimensions and based on the vision for knowledge creation, the academic library’s fundamental vision. The framework focuses on increasing diversity for library technology efforts based on the desire for transformation and inclusiveness within and across the dimensions. The dimensions are people, content and pedagogy, embeddedness and the global perspective, leadership, and the 5th dimension – bringing it all together.

Smartphone technology can be transformative to the deployment of lab-on-chip diagnostics.

Science.gov (United States)

Erickson, David; O'Dell, Dakota; Jiang, Li; Oncescu, Vlad; Gumus, Abdurrahman; Lee, Seoho; Mancuso, Matthew; Mehta, Saurabh

2014-09-07

The rapid expansion of mobile technology is transforming the biomedical landscape. By 2016 there will be 260 M active smartphones in the US and millions of health accessories and software "apps" running off them. In parallel with this have come major technical achievements in lab-on-a-chip technology leading to incredible new biochemical sensors and molecular diagnostic devices. Despite these advancements, the uptake of lab-on-a-chip technologies at the consumer level has been somewhat limited. We believe that the widespread availability of smartphone technology and the capabilities they offer in terms of computation, communication, social networking, and imaging will be transformative to the deployment of lab-on-a-chip type technology both in the developed and developing world. In this paper we outline why we believe this is the case, the new business models that may emerge, and detail some specific application areas in which this synergy will have long term impact, namely: nutrition monitoring and disease diagnostics in limited resource settings.

Model Driven Engineering

Science.gov (United States)

Gaševic, Dragan; Djuric, Dragan; Devedžic, Vladan

A relevant initiative from the software engineering community called Model Driven Engineering (MDE) is being developed in parallel with the Semantic Web (Mellor et al. 2003a). The MDE approach to software development suggests that one should first develop a model of the system under study, which is then transformed into the real thing (i.e., an executable software entity). The most important research initiative in this area is the Model Driven Architecture (MDA), which is Model Driven Architecture being developed under the umbrella of the Object Management Group (OMG). This chapter describes the basic concepts of this software engineering effort.

Service Design Outcomes in Finnish Book Industry : From Transition to Transformation

OpenAIRE

Nousiainen, Anu K.

2013-01-01

Service Design Outcomes in Finnish Book Industry - From Transition to Transformation Book industry is in transition especially due to technology advancements, converging operational environment and evolving consumer values and practices in the digital context. Simultaneously, the post-industrial paradigm shift from products to services, systems and experiences highlights the intangibles-driven economy, where existing value chain members need to find new directions and new business oppo...

Supervising nursing students in a technology-driven medication administration process in a hospital setting

DEFF Research Database (Denmark)

Gaard, Mette; Orbæk, Janne

2016-01-01

REVIEW QUESTION/OBJECTIVE: The objective of this review is to identify, describe and synthesize the experiences of nurse supervisors and the factors that influence the supervision of pre-graduate nursing students in undertaking technology-driven medication administration in hospital settings...

Using Science Driven Technologies for the Defense and Security Applications

Science.gov (United States)

Habib, Shahid; Zukor, Dorthy; Ambrose, Stephen D.

2004-01-01

For the past three decades, Earth science remote sensing technologies have been providing enormous amounts of useful data and information in broadening our understanding of our home planet as a system. This research, as it has expanded our learning process, has also generated additional questions. This has further resulted in establishing new science requirements, which have culminated in defining and pushing the state-of-the-art technology needs. NASA s Earth science program has deployed 18 highly complex satellites, with a total of 80 sensors, so far and is in a process of defining and launching multiple observing systems in the next decade. Due to the heightened security alert of the nation, researchers and technologists are paying serious attention to the use of these science driven technologies for dual use. In other words, how such sophisticated observing and measuring systems can be used in detecting multiple types of security concerns with a substantial lead time so that the appropriate law enforcement agencies can take adequate steps to defuse any potential risky scenarios. This paper examines numerous NASA technologies such as laser/lidar systems, microwave and millimeter wave technologies, optical observing systems, high performance computational techniques for rapid analyses, and imaging products that can have a tremendous pay off for security applications.

Transformation through expeditionary change using online learning and competence-building technologies

Directory of Open Access Journals (Sweden)

Donald M. Norris

2011-12-01

Full Text Available This paper presents a patterns-based model of the evolution of learning and competence-building technologies, grounded in examples of current practice. The model imagines five simple stages in how institutions use ‘expeditionary change' to innovate more nimbly. It builds upon three assertions. First, the pervasiveness of web-based knowledge-sharing in higher education's communities, observatories and social networks makes it easier to: introduce relevant technologies, find people doing similar things, learn from their experiences, find and collaborate with early adopters of learning technologies, hear about relevant innovations, and discover and exploit news of opportunities, threats and trends. Second, expeditionary change based on such knowledge-sharing facilitates transformations in: production functions for learning, roles of faculty and mentors, business models, patterns and cadences of interactivity, use of open resources, and the roles of learners. Third, those transformations make it easier for disruptive forms of higher education to emerge; for example, dynamically updated curricula that address emerging and important knowledge gaps, and thereby increase students' employability.

The challenge of a greener European construction sector: Views on technology-driven (eco)innovation

DEFF Research Database (Denmark)

Jofre, Sergio

, particular emphasis is given to the description and discussion of technology-driven eco-innovation initiatives such us nanotechnologies for a greener construction. Although the scope of this report covers the European construction sector, most data presented is at an EU scale. In this context, particular...

Smartphone technology can be transformative to the deployment of lab-on-chip diagnostics

Science.gov (United States)

Erickson, David; O’Dell, Dakota; Jiang, Li; Oncescu, Vlad; Gumus, Abdurrahman; Lee, Seoho; Mancuso, Matthew; Mehta, Saurabh

2014-01-01

The rapid expansion of mobile technology is transforming the biomedical landscape. By 2016 there will be 260M active smartphones in the US and millions of health accessories and software “apps” running off them. In parallel with this have come major technical achievements in lab-on-a-chip technology leading to incredible new biochemical sensors and molecular diagnostic devices. Despite these advancements, the uptake of lab-on-a-chip technologies at the consumer level has been somewhat limited. We believe that the widespread availability of smartphone technology and the capabilities they offer in terms of computation, communication, social networking, and imaging will be transformative to the deployment of lab-on-a-chip type technology both in the developed and developing world. In this paper we outline why we believe this is the case, the new business models that may emerge, and detail some specific application areas in which this synergy will have long term impact, namely: nutrition monitoring and disease diagnostics in limited resource settings. PMID:24700127

Transforming dose management techniques through technology

International Nuclear Information System (INIS)

Bennett, M.

1996-01-01

The management of occupational dose exposure has been transformed in recent years through the use of facilities such as computerized databases, remote instrumentation and electronic data transfer. Use of this technology has allowed increases both in the amount of data capable of being processed and in the speed at which the data is made available to operators and Health Physics personnel. These developments have significantly improved the quality and efficiency of dose management. The dose management system being used in support of the UK's naval nuclear plants has incorporated advances in the areas of dosimetry, data handling and data analysis. Physical dispersion of sites servicing the nuclear plants means that effective communication links have also been vital for good dose management. (author)

Commercialization of sustainable energy technologies

International Nuclear Information System (INIS)

Balachandra, P.; Kristle Nathan, Hippu Salk; Reddy, B. Sudhakara

2010-01-01

Commercialization efforts to diffuse sustainable energy technologies (SETs) have so far remained as the biggest challenge in the field of renewable energy and energy efficiency. Limited success of diffusion through government driven pathways urges the need for market based approaches. This paper reviews the existing state of commercialization of SETs in the backdrop of the basic theory of technology diffusion. The different SETs in India are positioned in the technology diffusion map to reflect their slow state of commercialization. The dynamics of SET market is analysed to identify the issues, barriers and stakeholders in the process of SET commercialization. By upgrading the 'potential adopters' to 'techno-entrepreneurs', the study presents the mechanisms for adopting a private sector driven 'business model' approach for successful diffusion of SETs. This is expected to integrate the processes of market transformation and entrepreneurship development with innovative regulatory, marketing, financing, incentive and delivery mechanisms leading to SET commercialization. (author)

Supporting Pre-Service Teachers' Technology-Enabled Learning Design Thinking through Whole of Programme Transformation

Science.gov (United States)

Bower, Matt; Highfield, Kate; Furney, Pam; Mowbray, Lee

2013-01-01

This paper explains a development and evaluation project aimed at transforming two pre-service teacher education programmes at Macquarie University to more effectively cultivate students' technology-enabled learning design thinking. The process of transformation was based upon an explicit and sustained focus on developing university academics'…

Deconvolution When Classifying Noisy Data Involving Transformations

KAUST Repository

Carroll, Raymond

2012-09-01

In the present study, we consider the problem of classifying spatial data distorted by a linear transformation or convolution and contaminated by additive random noise. In this setting, we show that classifier performance can be improved if we carefully invert the data before the classifier is applied. However, the inverse transformation is not constructed so as to recover the original signal, and in fact, we show that taking the latter approach is generally inadvisable. We introduce a fully data-driven procedure based on cross-validation, and use several classifiers to illustrate numerical properties of our approach. Theoretical arguments are given in support of our claims. Our procedure is applied to data generated by light detection and ranging (Lidar) technology, where we improve on earlier approaches to classifying aerosols. This article has supplementary materials online.

Deconvolution When Classifying Noisy Data Involving Transformations.

Science.gov (United States)

Carroll, Raymond; Delaigle, Aurore; Hall, Peter

2012-09-01

In the present study, we consider the problem of classifying spatial data distorted by a linear transformation or convolution and contaminated by additive random noise. In this setting, we show that classifier performance can be improved if we carefully invert the data before the classifier is applied. However, the inverse transformation is not constructed so as to recover the original signal, and in fact, we show that taking the latter approach is generally inadvisable. We introduce a fully data-driven procedure based on cross-validation, and use several classifiers to illustrate numerical properties of our approach. Theoretical arguments are given in support of our claims. Our procedure is applied to data generated by light detection and ranging (Lidar) technology, where we improve on earlier approaches to classifying aerosols. This article has supplementary materials online.

Deconvolution When Classifying Noisy Data Involving Transformations

KAUST Repository

Carroll, Raymond; Delaigle, Aurore; Hall, Peter

2012-01-01

In the present study, we consider the problem of classifying spatial data distorted by a linear transformation or convolution and contaminated by additive random noise. In this setting, we show that classifier performance can be improved if we carefully invert the data before the classifier is applied. However, the inverse transformation is not constructed so as to recover the original signal, and in fact, we show that taking the latter approach is generally inadvisable. We introduce a fully data-driven procedure based on cross-validation, and use several classifiers to illustrate numerical properties of our approach. Theoretical arguments are given in support of our claims. Our procedure is applied to data generated by light detection and ranging (Lidar) technology, where we improve on earlier approaches to classifying aerosols. This article has supplementary materials online.

Model-Driven Theme/UML

Science.gov (United States)

Carton, Andrew; Driver, Cormac; Jackson, Andrew; Clarke, Siobhán

Theme/UML is an existing approach to aspect-oriented modelling that supports the modularisation and composition of concerns, including crosscutting ones, in design. To date, its lack of integration with model-driven engineering (MDE) techniques has limited its benefits across the development lifecycle. Here, we describe our work on facilitating the use of Theme/UML as part of an MDE process. We have developed a transformation tool that adopts model-driven architecture (MDA) standards. It defines a concern composition mechanism, implemented as a model transformation, to support the enhanced modularisation features of Theme/UML. We evaluate our approach by applying it to the development of mobile, context-aware applications-an application area characterised by many non-functional requirements that manifest themselves as crosscutting concerns.

Transformation of standardized clinical models based on OWL technologies: from CEM to OpenEHR archetypes.

Science.gov (United States)

Legaz-García, María del Carmen; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás; Chute, Christopher G; Tao, Cui

2015-05-01

The semantic interoperability of electronic healthcare records (EHRs) systems is a major challenge in the medical informatics area. International initiatives pursue the use of semantically interoperable clinical models, and ontologies have frequently been used in semantic interoperability efforts. The objective of this paper is to propose a generic, ontology-based, flexible approach for supporting the automatic transformation of clinical models, which is illustrated for the transformation of Clinical Element Models (CEMs) into openEHR archetypes. Our transformation method exploits the fact that the information models of the most relevant EHR specifications are available in the Web Ontology Language (OWL). The transformation approach is based on defining mappings between those ontological structures. We propose a way in which CEM entities can be transformed into openEHR by using transformation templates and OWL as common representation formalism. The transformation architecture exploits the reasoning and inferencing capabilities of OWL technologies. We have devised a generic, flexible approach for the transformation of clinical models, implemented for the unidirectional transformation from CEM to openEHR, a series of reusable transformation templates, a proof-of-concept implementation, and a set of openEHR archetypes that validate the methodological approach. We have been able to transform CEM into archetypes in an automatic, flexible, reusable transformation approach that could be extended to other clinical model specifications. We exploit the potential of OWL technologies for supporting the transformation process. We believe that our approach could be useful for international efforts in the area of semantic interoperability of EHR systems. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

System Efficiency of a Tap Transformer Based Grid Connection Topology Applied on a Direct Driven Generator for Wind Power

Directory of Open Access Journals (Sweden)

Senad Apelfröjd

2014-01-01

Full Text Available Results from experiments on a tap transformer based grid connection system for a variable speed vertical axis wind turbine are presented. The tap transformer based system topology consists of a passive diode rectifier, DC-link, IGBT inverter, LCL-filter, and tap transformer. Full range variable speed operation is enabled by using the different step-up ratios of a tap transformer. Simulations using MATLAB/Simulink have been performed in order to study the behavior of the system. A full experimental set up of the system has been used in the laboratory study, where a clone of the on-site generator was driven by an induction motor and the system was connected to a resistive load to better evaluate the performance. Furthermore, the system is run and evaluated for realistic wind speeds and variable speed operation. For a more complete picture of the system performance, a case study using real site Weibull parameters is done, comparing different tap selection options. The results show high system efficiency at nominal power and an increase in overall power output for full tap operation in comparison with the base case, a standard transformer. In addition, the loss distribution at different wind speeds is shown, which highlights the dominant losses at low and high wind speeds. Finally, means for further increasing the overall system efficiency are proposed.

System efficiency of a tap transformer based grid connection topology applied on a direct driven generator for wind power.

Science.gov (United States)

Apelfröjd, Senad; Eriksson, Sandra

2014-01-01

Results from experiments on a tap transformer based grid connection system for a variable speed vertical axis wind turbine are presented. The tap transformer based system topology consists of a passive diode rectifier, DC-link, IGBT inverter, LCL-filter, and tap transformer. Full range variable speed operation is enabled by using the different step-up ratios of a tap transformer. Simulations using MATLAB/Simulink have been performed in order to study the behavior of the system. A full experimental set up of the system has been used in the laboratory study, where a clone of the on-site generator was driven by an induction motor and the system was connected to a resistive load to better evaluate the performance. Furthermore, the system is run and evaluated for realistic wind speeds and variable speed operation. For a more complete picture of the system performance, a case study using real site Weibull parameters is done, comparing different tap selection options. The results show high system efficiency at nominal power and an increase in overall power output for full tap operation in comparison with the base case, a standard transformer. In addition, the loss distribution at different wind speeds is shown, which highlights the dominant losses at low and high wind speeds. Finally, means for further increasing the overall system efficiency are proposed.

System Efficiency of a Tap Transformer Based Grid Connection Topology Applied on a Direct Driven Generator for Wind Power

Science.gov (United States)

2014-01-01

Results from experiments on a tap transformer based grid connection system for a variable speed vertical axis wind turbine are presented. The tap transformer based system topology consists of a passive diode rectifier, DC-link, IGBT inverter, LCL-filter, and tap transformer. Full range variable speed operation is enabled by using the different step-up ratios of a tap transformer. Simulations using MATLAB/Simulink have been performed in order to study the behavior of the system. A full experimental set up of the system has been used in the laboratory study, where a clone of the on-site generator was driven by an induction motor and the system was connected to a resistive load to better evaluate the performance. Furthermore, the system is run and evaluated for realistic wind speeds and variable speed operation. For a more complete picture of the system performance, a case study using real site Weibull parameters is done, comparing different tap selection options. The results show high system efficiency at nominal power and an increase in overall power output for full tap operation in comparison with the base case, a standard transformer. In addition, the loss distribution at different wind speeds is shown, which highlights the dominant losses at low and high wind speeds. Finally, means for further increasing the overall system efficiency are proposed. PMID:25258733

Organizing for Networked Information Technologies - Cases in Process Integration and Transformation

DEFF Research Database (Denmark)

The book provides seven practical examples of how Danish companies implemented new information technology in order to transform their internal and external business processes. The purpose is to share some of the companies' concerns and hopes during this implementation process, with each case repo...

Analyzing the Discourse of Chais Conferences for the Study of Innovation and Learning Technologies via a Data-Driven Approach

Science.gov (United States)

Silber-Varod, Vered; Eshet-Alkalai, Yoram; Geri, Nitza

2016-01-01

The current rapid technological changes confront researchers of learning technologies with the challenge of evaluating them, predicting trends, and improving their adoption and diffusion. This study utilizes a data-driven discourse analysis approach, namely culturomics, to investigate changes over time in the research of learning technologies. The…

Feasibility of EPC to BPEL Model Transformations based on Ontology and Patterns

NARCIS (Netherlands)

Meertens, Lucas O.; Iacob, Maria Eugenia; Eckartz, Silja M.; Rinderle-Ma, Stefanie; Sadiq, Shazia; Leymann, Frank

2010-01-01

Model-Driven Engineering holds the promise of transforming business models into code automatically. This requires the concept of model transformation. In this paper, we assess the feasibility of model transformations from Event-driven Process Chain models to Business Process Execution Language

Transformation of Operations Management through Information Technology and Information System in Suning

Institute of Scientific and Technical Information of China (English)

SHEN Houcai; YAN Xiaojun

2004-01-01

Information technology and information system today play major roles in companies who are competitive in the global market. In this paper, we will study how Suning Appliance Chain changes her operations by using information technology and information system. Suning's Strategy,operations structure, especially her logistics system are discussed firstly; how information technology and information system support her operation and logistics to gain competitive capabilities are further discussed. Finally, the operation system transformation through IT/IS in Suning is studied by the use of a stochastic inventory model.

Design study of technology requirements for high performance single-propeller-driven business airplanes

Science.gov (United States)

Kohlman, D. L.; Hammer, J.

1985-01-01

Developments in aerodyamic, structural and propulsion technologies which influence the potential for significant improvements in performance and fuel efficiency of general aviation business airplanes are discussed. The advancements include such technolgies as natural laminar flow, composite materials, and advanced intermittent combustion engines. The design goal for this parameter design study is a range of 1300 nm at 300 knots true airspeed with a payload of 1200lbs at 35,000 ft cruise altitude. The individual and synergistic effects of various advanced technologies on the optimization of this class of high performance, single engine, propeller driven business airplanes are identified.

Experimental investigations of the accelerator-driven transmutation technologies at the subcritical facility ''Yalina''

International Nuclear Information System (INIS)

Chigrinov, S.E.; Kiyavitskaya, H.I.; Serafimovich, I.G.; Rakhno, I.L.; Rutkovskaia, Ch.K.; Fokov, Y.; Khilmanovich, A.M.; Marstinkevich, B.A.; Bournos, V.V.; Korneev, S.V.; Mazanik, S.E.; Kulikovskaya, A.V.; Korbut, T.P.; Voropaj, N.K.; Zhouk, I.V.; Kievec, M.K.

2002-01-01

The investigations on accelerator-driven transmutation technologies (ADTT) focus on the reduction of the amount of long-lived wastes and the physics of a subcritical system driven with an external neutron source. This paper presents the experimental facility 'Yalina' which was designed and created at the Radiation Physics and Chemistry Problems Institute of the National Academy of Sciences of Belarus in the framework of the ISTC project no. B-070 to study the peculiarities of ADTT in thermal spectrum. A detailed description of the assembly, neutron generator and a preliminary analysis of some calculated and experimental data (multiplication factor, neutron flux density distribution in the assembly, transmutation rates of some long-lived fission products and minor actinides) are presented. (authors)

Design and competitive advantage in technology-driven sectors : The role of usability and aesthetics in Dutch IT companies

NARCIS (Netherlands)

Gemser, G.; Jacobs, D.; Ten Cate, R.

2006-01-01

This exploratory study examines the relationship between design and competitive advantage in a technology-driven sector. The sector chosen as a research setting is the Dutch information technology (IT) sector. The research on managerial perceptions of the benefits and costs of design focused on the

Performance of technology-driven simulators for medical students--a systematic review.

Science.gov (United States)

Michael, Michael; Abboudi, Hamid; Ker, Jean; Shamim Khan, Mohammed; Dasgupta, Prokar; Ahmed, Kamran

2014-12-01

Simulation-based education has evolved as a key training tool in high-risk industries such as aviation and the military. In parallel with these industries, the benefits of incorporating specialty-oriented simulation training within medical schools are vast. Adoption of simulators into medical school education programs has shown great promise and has the potential to revolutionize modern undergraduate education. An English literature search was carried out using MEDLINE, EMBASE, and psychINFO databases to identify all randomized controlled studies pertaining to "technology-driven" simulators used in undergraduate medical education. A validity framework incorporating the "framework for technology enhanced learning" report by the Department of Health, United Kingdom, was used to evaluate the capabilities of each technology-driven simulator. Information was collected regarding the simulator type, characteristics, and brand name. Where possible, we extracted information from the studies on the simulators' performance with respect to validity status, reliability, feasibility, education impact, acceptability, and cost effectiveness. We identified 19 studies, analyzing simulators for medical students across a variety of procedure-based specialities including; cardiovascular (n = 2), endoscopy (n = 3), laparoscopic surgery (n = 8), vascular access (n = 2), ophthalmology (n = 1), obstetrics and gynecology (n = 1), anesthesia (n = 1), and pediatrics (n = 1). Incorporation of simulators has so far been on an institutional level; no national or international trends have yet emerged. Simulators are capable of providing a highly educational and realistic experience for the medical students within a variety of speciality-oriented teaching sessions. Further research is needed to establish how best to incorporate simulators into a more primary stage of medical education; preclinical and clinical undergraduate medicine. Copyright © 2014 Elsevier Inc. All rights

Graph Transformation Semantics for a QVT Language

NARCIS (Netherlands)

Rensink, Arend; Nederpel, Ronald; Bruni, Roberto; Varró, Dániel

It has been claimed by many in the graph transformation community that model transformation, as understood in the context of Model Driven Architecture, can be seen as an application of graph transformation. In this paper we substantiate this claim by giving a graph transformation-based semantics to

Selected works of basic research on the physics and technology of accelerator driven clean nuclear power system

International Nuclear Information System (INIS)

Zhao Zhixiang

2002-01-01

38 theses are presented in this selected works of basic research on the physics and technology of accelerator driven clean nuclear power system. It includes reactor physics and experiment, accelerators physics and technology, nuclear physics, material research and partitioning. 13 abstracts, which has been presented on magazines home and abroad, are collected in the appendix

Analyzing the Discourse of Chais Conferences for the Study of Innovation and Learning Technologies via a Data-Driven Approach

Directory of Open Access Journals (Sweden)

Vered Silber-Varod

2016-12-01

Full Text Available The current rapid technological changes confront researchers of learning technologies with the challenge of evaluating them, predicting trends, and improving their adoption and diffusion. This study utilizes a data-driven discourse analysis approach, namely culturomics, to investigate changes over time in the research of learning technologies. The patterns and changes were examined on a corpus of articles published over the past decade (2006-2014 in the proceedings of Chais Conference for the Study of Innovation and Learning Technologies – the leading research conference on learning technologies in Israel. The interesting findings of the exhaustive process of analyzing all the words in the corpus were that the most commonly used terms (e.g., pupil, teacher, student and the most commonly used phrases (e.g., face-to-face in the field of learning technologies reflect a pedagogical rather than a technological aspect of learning technologies. The study also demonstrates two cases of change over time in prominent themes, such as “Facebook” and “the National Information and Communication Technology (ICT program”. Methodologically, this research demonstrates the effectiveness of a data-driven approach for identifying discourse trends over time.

Transforming Engineering Education - For Innovation and Development

DEFF Research Database (Denmark)

Marjoram, Tony

2013-01-01

Engineering and technology are of vital importance in innovation, social and economic development in higher and lower income countries. Development is driven by engineering applications and infrastructure, and most innovations derive from engineering. The last 50 years has seen significant change...... of young people in engineering, and the need to develop policy perspectives on the transformation of engineering education....... in knowledge production, dissemination and application, and associated needs for engineering, and yet engineering education has changed little over this period. This paper discusses the important role of problem-based learning and humanitarian engineering in promoting the interest, enrolment and retention...

Single attosecond pulse generation by using plasmon-driven double optical gating technology in crossed metal nanostructures

Science.gov (United States)

Feng, Liqiang; Liu, Katheryn

2018-05-01

An effective method to obtain the single attosecond pulses (SAPs) by using the multi-cycle plasmon-driven double optical gating (DOG) technology in the specifically designed metal nanostructures has been proposed and investigated. It is found that with the introduction of the crossed metal nanostructures along the driven and the gating polarization directions, not only the harmonic cutoff can be extended, but also the efficient high-order harmonic generation (HHG) at the very highest orders occurs only at one side of the region inside the nanostructure. As a result, a 93 eV supercontinuum with the near stable phase can be found. Further, by properly introducing an ultraviolet (UV) pulse into the driven laser polarization direction (which is defined as the DOG), the harmonic yield can be enhanced by two orders of magnitude in comparison with the singe polarization gating (PG) technology. However, as the polarized angle or the ellipticity of the UV pulse increase, the enhancement of the harmonic yield is slightly reduced. Finally, by superposing the selected harmonics from the DOG scheme, a 30 as SAP with intensity enhancement of two orders of magnitude can be obtained.

Renewable energy-driven desalination technologies: A comprehensive review on challenges and potential applications of integrated systems

KAUST Repository

Ghaffour, Noreddine

2015-01-01

Despite the tremendous improvements in conventional desalination technologies, its wide use is still limited due primarily to high energy requirements which are currently met with expensive fossil fuels. The use of alternative energy sources is essential to meet the growing demand for water desalination. In the last few decades a lot of effort has being directed in the use of different renewable energy (RE) sources to run desalination processes. However, the expansion of these efforts towards larger scale plants is hampered by several techno-economic challenges. Several medium-scale RE-driven desalination plants have been installed worldwide. Nevertheless, most of these plants are connected to the electrical grid to assure a continuous energy supply for stable operation. Furthermore, RE is mostly used to produce electric power which can be used to run desalination systems. This review paper focuses on an integrated approach in using RE-driven with an emphasis on solar and geothermal desalination technologies. Innovative and sustainable desalination processes which are suitable for integrated RE systems are presented. An assessment of the benefits of these technologies and their limitations are also discussed.

Technology Transformation

Science.gov (United States)

Scott, Heather; McGilll, Toria

2011-01-01

Social networking and other technologies, if used judiciously, present the means to integrate 21st century skills into the classroom curriculum. But they also introduce challenges that educators must overcome. Increased concerns about plagiarism and access to technology can test educators' creativity and school resources. Air Academy High School,…

Atmospheric pressure plasma jet's characterization and surface wettability driven by neon transformer

Science.gov (United States)

Elfa, R. R.; Nafarizal, N.; Ahmad, M. K.; Sahdan, M. Z.; Soon, C. F.

2017-03-01

Atmospheric pressure plasma driven by Neon transformer power supply argon is presented in this paper. Atmospheric pressure plasma system has attracted researcher interest over low pressure plasma as it provides a flexibility process, cost-efficient, portable device and vacuum-free device. Besides, another golden key of this system is the wide promising application in the field of work cover from industrial and engineering to medical. However, there are still numbers of fundamental investigation that are necessary such as device configuration, gas configuration and its effect. Dielectric barrier discharge which is also known as atmospheric pressure plasma discharge is created when there is gas ionization process occur which enhance the movement of atom and electron and provide energetic particles. These energetic particles can provide modification and cleaning property to the sample surface due to the bombardment of the high reactive ion and radicals to the sample surface. In order to develop atmospheric pressure plasma discharge, a high voltage and high frequency power supply is needed. In this work, we used a neon transformer power supply as the power supply. The flow of the Ar is feed into 10 mm cylinder quartz tube with different treatment time in order to investigate the effect of the plasma discharge. The analysis of each treatment time is presented by optical emission spectroscopy (OES) and water contact angle (WCA) measurement. The increase of gas treatment time shows increases intensity of reactive Ar and reduces the angle of water droplets in water contact angle. Treatment time of 20 s microslide glass surface shows that the plasma needle discharges have modified the sample surface from hydrophilic surface to superhydrophilic surface. Thus, this leads to another interesting application in reducing sample surface adhesion to optimize productivity in the industry of paintings, semiconductor and more.

Supramolecule-to-supramolecule transformations of coordination-driven self-assembled polygons.

Science.gov (United States)

Zhao, Liang; Northrop, Brian H; Stang, Peter J

2008-09-10

Two types of supramolecular transformations, wherein a self-assembled Pt(II)-pyridyl metal-organic polygon is controllably converted into an alternative polygon, have been achieved through the reaction between cobalt carbonyl and the acetylene moiety of a dipyridyl donor ligand. A [6 + 6] hexagon is transformed into two [3 + 3] hexagons, and a triangle-square mixture is converted into [2 + 2] rhomboids. 1H and 31P NMR spectra are used to track the transformation process and evaluate the yield of new self-assembled polygons. Such transformed species are identified by electrospray ionization (ESI) mass spectrometry. This new kind of supramolecule-to-supramolecule transformations provides a viable means for constructing, and then converting, new self-assembled polygons.

The Potential Transformative Impact of Web 2.0 Technology on the Intelligence Community

National Research Council Canada - National Science Library

Werner, Adrienne

2008-01-01

Web 2.0 technologies can transform and improve interagency collaboration in the Intelligence Community in many of the same ways that have marked their use through the internet in the public domain and private industry...

Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

Science.gov (United States)

Mueller, Crystal A.

2009-01-01

The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

Design of an accelerator-driven system for the destruction of nuclear waste

International Nuclear Information System (INIS)

Kadi, Y.; Revol, J.P.

2003-01-01

Progress in particle accelerator technology makes it possible to use a proton accelerator to produce energy and to destroy nuclear waste efficiently. The Energy Amplifier (EA) proposed by Carlo Rubbia and his group is a sub-critical fast neutron system driven by a proton accelerator. It is particularly attractive for destroying, through fission, transuranic elements produced by present nuclear reactors. The EA could also transform efficiently and at minimal cost long-lived fission fragments using the concept of Adiabatic Resonance Crossing (ARC) recently tested at CERN with the TARC experiment. (author)

Novel enabling technologies of gene isolation and plant transformation for improved crop protection

Energy Technology Data Exchange (ETDEWEB)

Torok, Tamas

2013-02-04

Meeting the needs of agricultural producers requires the continued development of improved transgenic crop protection products. The completed project focused on developing novel enabling technologies of gene discovery and plant transformation to facilitate the generation of such products.

Piezoelectric Transformers: An Historical Review

OpenAIRE

Alfredo Vazquez Carazo

2016-01-01

Piezoelectric transformers (PTs) are solid-state devices that transform electrical energy into electrical energy by means of a mechanical vibration. These devices are manufactured using piezoelectric materials that are driven at resonance. With appropriate design and circuitry, it is possible to step up and step down the voltages between the input and output sections of the piezoelectric transformer, without making use of magnetic materials and obtaining excellent conversion efficiencies. The...

Dynamically adaptive data-driven simulation of extreme hydrological flows

Science.gov (United States)

Kumar Jain, Pushkar; Mandli, Kyle; Hoteit, Ibrahim; Knio, Omar; Dawson, Clint

2018-02-01

Hydrological hazards such as storm surges, tsunamis, and rainfall-induced flooding are physically complex events that are costly in loss of human life and economic productivity. Many such disasters could be mitigated through improved emergency evacuation in real-time and through the development of resilient infrastructure based on knowledge of how systems respond to extreme events. Data-driven computational modeling is a critical technology underpinning these efforts. This investigation focuses on the novel combination of methodologies in forward simulation and data assimilation. The forward geophysical model utilizes adaptive mesh refinement (AMR), a process by which a computational mesh can adapt in time and space based on the current state of a simulation. The forward solution is combined with ensemble based data assimilation methods, whereby observations from an event are assimilated into the forward simulation to improve the veracity of the solution, or used to invert for uncertain physical parameters. The novelty in our approach is the tight two-way coupling of AMR and ensemble filtering techniques. The technology is tested using actual data from the Chile tsunami event of February 27, 2010. These advances offer the promise of significantly transforming data-driven, real-time modeling of hydrological hazards, with potentially broader applications in other science domains.

Dynamically adaptive data-driven simulation of extreme hydrological flows

KAUST Repository

Kumar Jain, Pushkar

2017-12-27

Hydrological hazards such as storm surges, tsunamis, and rainfall-induced flooding are physically complex events that are costly in loss of human life and economic productivity. Many such disasters could be mitigated through improved emergency evacuation in real-time and through the development of resilient infrastructure based on knowledge of how systems respond to extreme events. Data-driven computational modeling is a critical technology underpinning these efforts. This investigation focuses on the novel combination of methodologies in forward simulation and data assimilation. The forward geophysical model utilizes adaptive mesh refinement (AMR), a process by which a computational mesh can adapt in time and space based on the current state of a simulation. The forward solution is combined with ensemble based data assimilation methods, whereby observations from an event are assimilated into the forward simulation to improve the veracity of the solution, or used to invert for uncertain physical parameters. The novelty in our approach is the tight two-way coupling of AMR and ensemble filtering techniques. The technology is tested using actual data from the Chile tsunami event of February 27, 2010. These advances offer the promise of significantly transforming data-driven, real-time modeling of hydrological hazards, with potentially broader applications in other science domains.

A novel compact model for on-chip stacked transformers in RF-CMOS technology

Science.gov (United States)

Jun, Liu; Jincai, Wen; Qian, Zhao; Lingling, Sun

2013-08-01

A novel compact model for on-chip stacked transformers is presented. The proposed model topology gives a clear distinction to the eddy current, resistive and capacitive losses of the primary and secondary coils in the substrate. A method to analytically determine the non-ideal parasitics between the primary coil and substrate is provided. The model is further verified by the excellent match between the measured and simulated S -parameters on the extracted parameters for a 1 : 1 stacked transformer manufactured in a commercial RF-CMOS technology.

Transformation of Digital Ecosystems

DEFF Research Database (Denmark)

Henningsson, Stefan; Hedman, Jonas

2014-01-01

the Digital Ecosystem Technology Transformation (DETT) framework for explaining technology-based transformation of digital ecosystems by integrating theories of business and technology ecosystems. The framework depicts ecosystem transformation as distributed and emergent from micro-, meso-, and macro- level......In digital ecosystems, the fusion relation between business and technology means that the decision of technical compatibility of the offering is also the decision of how to position the firm relative to the coopetive relations that characterize business ecosystems. In this article we develop...... coopetition. The DETT framework consists an alternative to the existing explanations of digital ecosystem transformation as the rational management of one central actor balancing ecosystem tensions. We illustrate the use of the framework by a case study of transformation in the digital payment ecosystem...

Important requirements for RF generators for Accelerator-Driven Transmutation Technologies (ADTT)

International Nuclear Information System (INIS)

Lynch, M.T.; Tallerico, P.J.; Lawrence, G.P.

1994-01-01

All Accelerator-Driven Transmutation applications require very large amounts of RF Power. For example, one version of a Plutonium burning system requires an 800-MeV, 80-mA, proton accelerator running at 100% duty factor. This accelerator requires approximately 110-MW of continuous RF power if one assumes only 10% reserve power for control of the accelerator fields. In fact, to minimize beam spill, the RF controls may need as much as 15 to 20% of reserve power. In addition, unlike an electron accelerator in which the beam is relativistic, a failed RF station can disturb the synchronism of the beam, possibly shutting down the entire accelerator. These issues and more lead to a set of requirements for the RF generators which are stringent, and in some cases, conflicting. In this paper, we will describe the issues and requirements, and outline a plan for RF generator development to meet the needs of the Accelerator-Driven Transmutation Technologies. The key issues which will be discussed include: operating efficiency, operating linearity, effect on the input power grid, bandwidth, gain, reliability, operating voltage, and operating current

Education Technology Transformation

Science.gov (United States)

Kennedy, Mike

2012-01-01

Years ago, as personal computers and other technological advancements began to find their way into classrooms and other educational settings, teachers and administrators sought ways to use new technology to benefit students. The potential for improving education was clear, but the limitations of the available education technology made it difficult…

Optimization of Agrobacterium -mediated transformation parameters ...

African Journals Online (AJOL)

Agrobacterium-mediated transformation factors for sweet potato embryogenic calli were optimized using -glucuronidase (GUS) as a reporter. The binary vector pTCK303 harboring the modified GUS gene driven by the CaMV 35S promoter was used. Transformation parameters were optimized including bacterial ...

Future-oriented technology analysis: Its potential to address disruptive transformations

OpenAIRE

Gagnin, Cristiano; Havas, Attila; Saritas, Ozcan

2011-01-01

This paper reflects on the potential of future-oriented analysis (FTA) to address major change and to support decision-makers and other stakeholders in anticipating and dealing with transformations. It does so by critically reflecting on the selected papers for this special issue as well as on the discussions that took place at the fourth Seville International Conference on Future-oriented Technology Analysis. Considering the potential roles of FTA in enabling a better understanding of co...

The J and P transformer book a practical technology of the power transformer

CERN Document Server

Franklin, Arthur Charles

1983-01-01

The J&P Transformer Book, 11th Edition deals with the design, installation, and maintenance of transformers. The book contains technical information, tables, calculations, diagrams, and illustrations based on information supplied by transformer manufacturers and related industries. It reviews fundamental transformer principles, the magnetic circuit, the characteristics of, and general types of transformers. The text contains tables showing the information that should be given to the transformer manufacturer to be used as a basis in preparing quotations. Transformer designs include three import

3D Printing is a Transformative Technology in Congenital Heart Disease

Directory of Open Access Journals (Sweden)

Shafkat Anwar, MD

2018-04-01

Full Text Available Summary: Survival in congenital heart disease has steadily improved since 1938, when Dr. Robert Gross successfully ligated for the first time a patent ductus arteriosus in a 7-year-old child. To continue the gains made over the past 80 years, transformative changes with broad impact are needed in management of congenital heart disease. Three-dimensional printing is an emerging technology that is fundamentally affecting patient care, research, trainee education, and interactions among medical teams, patients, and caregivers. This paper first reviews key clinical cases where the technology has affected patient care. It then discusses 3-dimensional printing in trainee education. Thereafter, the role of this technology in communication with multidisciplinary teams, patients, and caregivers is described. Finally, the paper reviews translational technologies on the horizon that promise to take this nascent field even further. Key Words: cardiac imaging, cardiothoracic surgery, congenital heart disease, simulation, 3D printing

The Educational Museum: Innovations and Technologies Transforming Museum Education. The Benaki Museum, Athens, 17 October 2013

Directory of Open Access Journals (Sweden)

Dimitra Christidou

2014-01-01

Full Text Available The main topic of 'The Educational Museum: Innovations and Technologies Transforming Museum Education 'conference, third in a series of conferences organised by the Benaki Museum in partnership with the American Embassy and the British Council in Greece, was the use of technology and social media as means of transforming museum education and, sometimes, funding museum exhibitions and educational programmes. Among others, the conference aimed to discuss the use of digital applications such as Facebook, Twitter, Pinterest and Kickstarter by museums in order to attract a wider audience, interpret their collections and even fund their programmes.

Where’s the Transformation? Unlocking the Potential of Technology-Enhanced Assessment

Directory of Open Access Journals (Sweden)

Trudy Sweeney

2017-03-01

Full Text Available This study provides insight into technology-enhanced assessment (TEA in diverse higher education contexts. The effectiveness of using technology for assessment in higher education is still equivocal, particularly in regard to evidence of improvements in student learning. This empirical research explores the affordances that technology offers to assessment for transforming student learning. A systematic literature review, guided by an analytic survey tool, was used to identify and interrogate recent scholarly articles published in 19 international journals. From a total of 1713 articles, 139 articles were identified as being focused on the use of technology for assessment. The analytic tool guided the rigorous exploration of the literature regarding the types of technology being used, the educational goal, the type of assessment, and the degree of “transformation” afforded by the technology. Results showed that, in the sample investigated, TEA is used most frequently for formative peer learning, as part of the task design and feedback stages of the assessment cycle, and that social media has been a major affordance for this. Results are discussed with a view to fostering a future culture of inquiry and scholarship around TEA in higher education.

Editorial - Special Issue on Model-driven Service-oriented architectures

NARCIS (Netherlands)

Andrade Almeida, João; Ferreira Pires, Luis; van Sinderen, Marten J.; Steen, M.W.A.

2009-01-01

Model-driven approaches to software development have proliferated in recent years owing to the availability of techniques based on metamodelling and model transformations, such as the meta-object facility (MOF) and the query view transformation (QVT) standards. During the same period,

Innovation in transformative nursing leadership: nursing informatics competencies and roles.

Science.gov (United States)

Remus, Sally; Kennedy, Margaret Ann

2012-12-01

In a recent brief to the Canadian Nurses Association's National Expert Commission on the Health of Our Nation, the Academy of Canadian Executive Nurses (ACEN) discussed leadership needs in the Canadian healthcare system, and promoted the pivotal role of nursing executives in transforming Canada's healthcare system into an integrated patient-centric system. Included among several recommendations was the need to develop innovative leadership competencies that enable nurse leaders to lead and advance transformative health system change. This paper focuses on an emerging "avant-garde executive leadership competency" recommended for today's health leaders to guide health system transformation. Specifically, this competency is articulated as "state of the art communication and technology savvy," and it implies linkages between nursing informatics competencies and transformational leadership roles for nurse executive. The authors of this paper propose that distinct nursing informatics competencies are required to augment traditional executive skills to support transformational outcomes of safe, integrated, high-quality care delivery through knowledge-driven care. International trends involving nursing informatics competencies and the evolution of new corporate informatics roles, such as chief nursing informatics officers (CNIOs), are demonstrating value and advanced transformational leadership as nursing executive roles that are informed by clinical data. Copyright © 2013 Longwoods Publishing.

Evidence of displacement-driven maturation along the San Cristobal Trough transform plate boundary

Science.gov (United States)

Neely, James S.; Furlong, Kevin P.

2018-03-01

The San Cristobal Trough (SCT), formed by the tearing of the Australia plate as it subducts under the Pacific plate near the Solomon Islands, provides an opportunity to study the transform boundary development process. Recent seismicity (2013-2016) along the 280 km long SCT, known as a Subduction-Transform Edge Propagator (STEP) fault, highlights the tearing process and ongoing development of the plate boundary. The region's earthquakes reveal two key characteristics. First, earthquakes at the western terminus of the SCT, which we interpret to indicate the Australia plate tearing, display disparate fault geometries. These events demonstrate that plate tearing is accommodated via multiple intersecting planes rather than a single through-going fault. Second, the SCT hosts sequences of Mw ∼7 strike-slip earthquakes that migrate westward through a rapid succession of events. Sequences in 1993 and 2015 both began along the eastern SCT and propagated west, but neither progression ruptured into or nucleated a large earthquake within the region near the tear. Utilizing b-value and Coulomb Failure Stress analyses, we examine these along-strike variations in the SCT's seismicity. b-Values are highest along the youngest, western end of the SCT and decrease with increasing distance from the tear. This trend may reflect increasing strain localization with increasing displacement. Coulomb Failure Stress analyses indicate that the stress conditions were conducive to continued western propagation of the 1993 and 2015 sequences suggesting that the unruptured western SCT may have fault geometries or properties that inhibit continued rupture. Our results indicate a displacement-driven fault maturation process. The multi-plane Australia plate tearing likely creates a western SCT with diffuse strain accommodated along a network of disorganized faults. After ∼90 km of cumulative displacement (∼900,000 yr of plate motion), strain localizes and faults align, allowing the SCT to host

Work(er)-Driven Innovation

Science.gov (United States)

Smith, Raymond

2017-01-01

Purpose: The focus on innovation as a foundational element of enhanced organisational performance has led to the promoting and valuing of greater levels of employee participation in innovation processes. An emergent concept of employee-driven innovation could be argued to have hindered understandings of the creative and transformative nature of…

Effect of Technology Driven Agricultural Land Use Change on Regional Hydroclimate

Science.gov (United States)

Arritt, R. W.; Sines, T. R.; Groisman, P. Y.; Gelder, B. K.

2017-12-01

During the mid-20th century motorized equipment replaced work animals in the central U.S. This led to a 95% decrease in farmland for producing oats, which had mostly been used as feed for horses. Much of this land was converted to more profitable crops such as soybeans and maize. The same period also saw a strong shift of the central U.S. precipitation intensity spectrum toward heavier events. Was this a coincidence, or is there a causal relationship? We investigate possible connections between this technology-driven land use change and regional hydroclimate by performing multi-decadal simulations over the central U.S. using the WRF-ARW regional climate model coupled with the Community Land Model (CLM 4.5). Cropland planted in maize, soybean, winter wheat, small grains (which includes oats and spring wheat), and other C3 and C4 crops were reconstructed on a decade by decade basis from 1940-2010 using county-level crop data. These crop distributions were used as land surface boundary conditions for two multi-decadal regional climate simulations, one with 1940s land use and another with modern (circa 2010) land use. Modern land use produced a shift in the simulated daily precipitation intensity spectrum toward heavy events, with higher frequencies of heavy precipitation amounts and lower frequencies of light amounts compared to 1940s land use. The results suggest that replacement of work animals by mechanized transport led to land use changes that produced about 10-30% of the observed trend toward more intense precipitation over the central United States. We therefore recommend that policy- and technology-driven changes in crop type be taken into account when projecting future climate and water resources.

Accelerator-driven assembly for plutonium transformation (ADAPT)

Science.gov (United States)

Tuyle, Greorgy J. Van; Todosow, Michael; Powell, James; Schweitzer, Donald

1995-01-01

A particle accelerator-driven spallation target and corresponding blanket region are proposed for the ultimate disposition of weapons-grade plutonium being retired from excess nuclear weapons in the U.S. and Russia. The highly fissle plutonium is contained within .25 to .5 cm diameter silicon-carbide coated graphite beads, which are cooled by helium, within the slightly subcritical blanket region. Major advantages include very high one-pass burnup (over 90%), a high integrity waste form (the coated beads), and operation in a subcritical mode, thereby minimizing the vulnerability to the positive reativity feedbacks often associated with plutonium fuel.

Current status and future perspectives of electron interactions with molecules, clusters, surfaces, and interfaces [Workshop on Fundamental challenges in electron-driven chemistry; Workshop on Electron-driven processes: Scientific challenges and technological opportunities

Energy Technology Data Exchange (ETDEWEB)

Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.; Rescigno, Thomas N.

2000-09-01

This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices and other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.

Transformational change: creating a safe operating space for humanity

Directory of Open Access Journals (Sweden)

Clive A. McAlpine

2015-03-01

Full Text Available Many ecologists and environmental scientists witnessing the scale of current environmental change are becoming increasingly alarmed about how humanity is pushing the boundaries of the Earth's systems beyond sustainable levels. The world urgently needs global society to redirect itself toward a more sustainable future: one that moves intergenerational equity and environmental sustainability to the top of the political agenda, and to the core of personal and societal belief systems. Scientific and technological innovations are not enough: the global community, individuals, civil society, corporations, and governments, need to adjust their values and beliefs to one in which sustainability becomes the new global paradigm society. We argue that the solution requires transformational change, driven by a realignment of societal values, where individuals act ethically as an integral part of an interconnected society and biosphere. Transition management provides a framework for achieving transformational change, by giving special attention to reflective learning, interaction, integration, and experimentation at the level of society, thereby identifying the system conditions and type of changes necessary for enabling sustainable transformation.

Code Generation by Model Transformation : A Case Study in Transformation Modularity

NARCIS (Netherlands)

Hemel, Z.; Kats, L.C.L.; Visser, E.

2008-01-01

Preprint of paper published in: Theory and Practice of Model Transformations (ICMT 2008), Lecture Notes in Computer Science 5063; doi:10.1007/978-3-540-69927-9_13 The realization of model-driven software development requires effective techniques for implementing code generators for domain-specific

Power transformers - Part 11: Dry-type transformers

CERN Document Server

International Electrotechnical Commission. Geneva

2004-01-01

Applies to dry-type power transformers (including auto-transformers) having values of highest voltage for equipment up to and including 36 kV and at least one winding operating at greater than 1,1 kV. Applies to all construction technologies.

DEVELOPMENT OF REACTION-DRIVEN IONIC TRANSPORT MEMBRANES (ITMs) TECHNOLOGY: PHASE IV/BUDGET PERIOD 6 “Development of ITM Oxygen Technology for Integration in IGCC and Other Advanced Power Generation Systems”

Energy Technology Data Exchange (ETDEWEB)

David, Studer

2012-03-01

Air Products and Chemicals, along with development participants and in association with the U.S. Department of Energy, has made substantial progress in developing a novel air separation technology. Unlike conventional cryogenic processes, this method uses high-temperature ceramic membranes to produce high-purity oxygen. The membranes selectively transport oxygen ions with high flux and infinite theoretical selectivity. Reaction-driven ceramic membranes are fabricated from non-porous, multi-component metallic oxides, operate at temperatures typically over 700°C, and have exceptionally high oxygen flux and selectivity. Oxygen from low-pressure air permeates as oxygen ions through the ceramic membrane and is consumed through chemical reactions, thus creating a chemical driving force that pulls oxygen ions across the membrane at high rates. The oxygen reacts with a hydrocarbon fuel in a partial oxidation process to produce a hydrogen and carbon monoxide mixture – synthesis gas. This project expands the partial-oxidation scope of ITM technology beyond natural gas feed and investigates the potential for ITM reaction-driven technology to be used in conjunction with gasification and pyrolysis technologies to provide more economical routes for producing hydrogen and synthesis gas. This report presents an overview of the ITM reaction-driven development effort, including ceramic materials development, fabrication and testing of small-scale ceramic modules, ceramic modeling, and the investigation of gasifier integration schemes

Construction of UML class diagram with Model-Driven Development

Directory of Open Access Journals (Sweden)

Tomasz Górski

2016-03-01

Full Text Available Model transformations play a key role in software development projects based on Model--Driven Development (MDD principles. Transformations allow for automation of repetitive and well-defined steps, thus shortening design time and reducing a number of errors. In the object-oriented approach, the key elements are use cases. They are described, modelled and later designed until executable application code is obtained. The aim of the paper is to present transformation of a model-to-model type, Communication-2-Class, which automates construction of Unified Modelling Language (UML class diagram in the context of the analysis/design model. An UML class diagram is created based on UML communication diagram within use case realization. As a result, a class diagram shows all of the classes involved in the use case realization and the relationships among them. The plug-in which implements Communication-2-Class transformation was implemented in the IBM Rational Software Architect. The article presents the tests results of developed plug-in, which realizes Communication-2-Class transformation, showing capabilities of shortening use case realization’s design time.[b]Keywords[/b]: Model-Driven Development, transformations, Unified Modelling Language, analysis/design model, UML class diagram, UML communication diagram

National Strategies to Harness Information Technology Seeking Transformation in Singapore, Finland, the Philippines, and South Africa

CERN Document Server

Knight, Peter

2012-01-01

The ability to harness Information Communication Technologies (ICTs) is increasingly at the heart of competitiveness and sustainable growth. As countries engage in an increasingly competitive global economy, they are trying to weave ICT into their development strategies, in the same way enterprises have learned to use ICT to transform their business models and strategies. This integration offers a new path to development that is responsive to the challenges of our times.  In National Strategies to Harness Information Technology, Nagy Hanna and Peter Knight provide a framework for assessing the opportunities, challenges, and prospects for “e-transformation” and for analyzing the options and innovations adopted to manage the e-transformation process.  They ask hard questions: what does it take to harness ICT to transform an economy?  Why some countries accelerate their development journey with ICT while others fail?  How did successful countries balance the need for strategic leadership with bottom up ...

Research on fast Fourier transforms algorithm of huge remote sensing image technology with GPU and partitioning technology.

Science.gov (United States)

Yang, Xue; Li, Xue-You; Li, Jia-Guo; Ma, Jun; Zhang, Li; Yang, Jan; Du, Quan-Ye

2014-02-01

Fast Fourier transforms (FFT) is a basic approach to remote sensing image processing. With the improvement of capacity of remote sensing image capture with the features of hyperspectrum, high spatial resolution and high temporal resolution, how to use FFT technology to efficiently process huge remote sensing image becomes the critical step and research hot spot of current image processing technology. FFT algorithm, one of the basic algorithms of image processing, can be used for stripe noise removal, image compression, image registration, etc. in processing remote sensing image. CUFFT function library is the FFT algorithm library based on CPU and FFTW. FFTW is a FFT algorithm developed based on CPU in PC platform, and is currently the fastest CPU based FFT algorithm function library. However there is a common problem that once the available memory or memory is less than the capacity of image, there will be out of memory or memory overflow when using the above two methods to realize image FFT arithmetic. To address this problem, a CPU and partitioning technology based Huge Remote Fast Fourier Transform (HRFFT) algorithm is proposed in this paper. By improving the FFT algorithm in CUFFT function library, the problem of out of memory and memory overflow is solved. Moreover, this method is proved rational by experiment combined with the CCD image of HJ-1A satellite. When applied to practical image processing, it improves effect of the image processing, speeds up the processing, which saves the time of computation and achieves sound result.

In vivo Assembly in Escherichia coli of Transformation Vectors for Plastid Genome Engineering

Directory of Open Access Journals (Sweden)

Yuyong Wu

2017-08-01

Full Text Available Plastid transformation for the expression of recombinant proteins and entire metabolic pathways has become a promising tool for plant biotechnology. However, large-scale application of this technology has been hindered by some technical bottlenecks, including lack of routine transformation protocols for agronomically important crop plants like rice or maize. Currently, there are no standard or commercial plastid transformation vectors available for the scientific community. Construction of a plastid transformation vector usually requires tedious and time-consuming cloning steps. In this study, we describe the adoption of an in vivo Escherichia coli cloning (iVEC technology to quickly assemble a plastid transformation vector. The method enables simple and seamless build-up of a complete plastid transformation vector from five DNA fragments in a single step. The vector assembled for demonstration purposes contains an enhanced green fluorescent protein (GFP expression cassette, in which the gfp transgene is driven by the tobacco plastid ribosomal RNA operon promoter fused to the 5′ untranslated region (UTR from gene10 of bacteriophage T7 and the transcript-stabilizing 3′UTR from the E. coli ribosomal RNA operon rrnB. Successful transformation of the tobacco plastid genome was verified by Southern blot analysis and seed assays. High-level expression of the GFP reporter in the transplastomic plants was visualized by confocal microscopy and Coomassie staining, and GFP accumulation was ~9% of the total soluble protein. The iVEC method represents a simple and efficient approach for construction of plastid transformation vector, and offers great potential for the assembly of increasingly complex vectors for synthetic biology applications in plastids.

Building and managing strategic alliances in technology-driven start-ups: a critical review of literature

OpenAIRE

Comi, Alice; Eppler, Martin J.

2009-01-01

In this article, we critically review the current literature on alliance formation and management with a particular emphasis on small businesses, and on managerial implications for start-up enterprises. In the beginning of the article, we discuss the advantages and the challenges of inter-organizational collaboration, by taking the perspective of technology-driven start-ups operating in highly competitive environments. We then review the managerial advice suggested by the current liter...

Mastering Technologies in Design-Driven Innovation

DEFF Research Database (Denmark)

Dell'era, Claudio; Marchesi, Alessio; Verganti, Roberto

2010-01-01

Only a few companies have mastered the design-driven approach to innovation. This paper examines what it means to make design a central part of the business process, able to add value to products and create new markets. More specifically, it focuses on the interplay between the functional and sem...

Handbook of Research on E-Transformation and Human Resources Management Technologies: Organizational Outcomes and Challenges

NARCIS (Netherlands)

Bondarouk, Tatiana; Ruel, Hubertus Johannes Maria; Guiderdoni-Jourdain, Karine; Oiry, Ewan

2009-01-01

Digital advancements and discoveries are now challenging traditional human resource management services within businesses. The Handbook of Research on E-Transformation and Human Resources Management Technologies: Organizational Outcomes and Challenges provides practical, situated, and unique

Transforming incomplete fault tree to Ishikawa diagram as an alternative method for technology transfer

Science.gov (United States)

Batzias, Dimitris F.

2012-12-01

Fault Tree Analysis (FTA) can be used for technology transfer when the relevant problem (called 'top even' in FTA) is solved in a technology centre and the results are diffused to interested parties (usually Small Medium Enterprises - SMEs) that have not the proper equipment and the required know-how to solve the problem by their own. Nevertheless, there is a significant drawback in this procedure: the information usually provided by the SMEs to the technology centre, about production conditions and corresponding quality characteristics of the product, and (sometimes) the relevant expertise in the Knowledge Base of this centre may be inadequate to form a complete fault tree. Since such cases are quite frequent in practice, we have developed a methodology for transforming incomplete fault tree to Ishikawa diagram, which is more flexible and less strict in establishing causal chains, because it uses a surface phenomenological level with a limited number of categories of faults. On the other hand, such an Ishikawa diagram can be extended to simulate a fault tree as relevant knowledge increases. An implementation of this transformation, referring to anodization of aluminium, is presented.

Energy storage technologies and hybrid architectures for specific diesel-driven rail duty cycles: Design and system integration aspects

International Nuclear Information System (INIS)

Meinert, M.; Prenleloup, P.; Schmid, S.; Palacin, R.

2015-01-01

Highlights: • We assessed integration of energy storage systems into hybrid system architectures. • We considered mechanical and electrical energy storage systems. • Potential of different combinations has been analyzed by standardized duty cycles. • Most promising are diesel-driven suburban, regional and shunting operations. • Double-layer capacitors and Lithium-ion batteries have the highest potential. - Abstract: The use of diesel-driven traction is an intrinsic part of the functioning of railway systems and it is expected to continue being so for the foreseeable future. The recent introduction of more restrictive greenhouse gas emission levels and other legislation aiming at the improvement of the environmental performance of railway systems has led to the need of exploring alternatives for cleaner diesel rolling stock. This paper focuses on assessing energy storage systems and the design of hybrid system architectures to determine their potential use in specific diesel-driven rail duty cycles. Hydrostatic accumulators, flywheels, Lithium-ion batteries and double-layer capacitors have been assessed and used to design hybrid system architectures. The potential of the different technology combinations has been analyzed using standardized duty cycles enhanced with gradient profiles related to suburban, regional and shunting operations. The results show that double-layer capacitors and Lithium-ion batteries have the highest potential to be successfully integrated into the system architecture of diesel-driven rail vehicles. Furthermore, the results also suggest that combining these two energy storage technologies into a single hybridisation package is a highly promising design that draws on their strengthens without any significant drawbacks.

Ion-cyclotron-resonance- and Fourier-transform-ion-cyclotron-resonance spectroscopy: technology and application

International Nuclear Information System (INIS)

Luederwald, I.

1977-01-01

Instrumentation and technology of Ion-Cyclotron-Resonance and Fourier-Transform-Ion-Cyclotron-Resonance Spectroscopy are described. The method can be applied to studies of ion/molecule reactions in gas phase, to obtain thermodynamic data as gas phase acidity or basicity, proton and electron affinity, and to establish reaction mechanisms and ion structures. (orig.) [de

The Evolving Relationship Between Technology and National Security in China: Innovation, Defense Transformation, and China’s Place in the Global Technology Order

Science.gov (United States)

2016-02-12

Stockmann, Xiao Qiang. Changing Media, Changing China , New York: Oxford University Press, (01 2011) Dieter Ernst. Indigenous Innovation and...2211 China , science, technology, dual use, defense, security, innovation REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10...ABSTRACT Final Report: The Evolving Relationship Between Technology and National Security in China : Innovation , Defense Transformation, and China’s

Clinical operations generation next… The age of technology and outsourcing

Directory of Open Access Journals (Sweden)

Priya Temkar

2015-01-01

Full Text Available Huge cost pressures and the need to drive faster approvals has driven a technology transformation in the clinical trial (CT industry. The CT industry is thus leveraging mobile data, cloud computing, social media, robotic automation, and electronic source to drive efficiencies in a big way. Outsourcing of clinical operations support services to technology companies with a clinical edge is gaining tremendous importance. This paper provides an overview of current technology trends, applicable Food and Drug Administration (FDA guidelines, basic challenges that the pharma industry is facing in trying to implement such changes and its shift towards outsourcing these services to enable it to focus on site operations.

Clinical operations generation next… The age of technology and outsourcing.

Science.gov (United States)

Temkar, Priya

2015-01-01

Huge cost pressures and the need to drive faster approvals has driven a technology transformation in the clinical trial (CT) industry. The CT industry is thus leveraging mobile data, cloud computing, social media, robotic automation, and electronic source to drive efficiencies in a big way. Outsourcing of clinical operations support services to technology companies with a clinical edge is gaining tremendous importance. This paper provides an overview of current technology trends, applicable Food and Drug Administration (FDA) guidelines, basic challenges that the pharma industry is facing in trying to implement such changes and its shift towards outsourcing these services to enable it to focus on site operations.

Clinical operations generation next… The age of technology and outsourcing

Science.gov (United States)

Temkar, Priya

2015-01-01

Huge cost pressures and the need to drive faster approvals has driven a technology transformation in the clinical trial (CT) industry. The CT industry is thus leveraging mobile data, cloud computing, social media, robotic automation, and electronic source to drive efficiencies in a big way. Outsourcing of clinical operations support services to technology companies with a clinical edge is gaining tremendous importance. This paper provides an overview of current technology trends, applicable Food and Drug Administration (FDA) guidelines, basic challenges that the pharma industry is facing in trying to implement such changes and its shift towards outsourcing these services to enable it to focus on site operations. PMID:26623386

Metrics for analyzing the quality of model transformations

NARCIS (Netherlands)

Amstel, van M.F.; Lange, C.F.J.; Brand, van den M.G.J.; Falcone, G.; Guéhéneuc, Y.G.; Lange, C.F.J.; Porkoláb, Z.; Sahraoui, H.A.

2008-01-01

Model transformations become increasingly important with the emergence of model driven engineering of, amongst others, objectoriented software systems. It is therefore necessary to define and evaluate the quality of model transformations. The goal of our research is to make the quality of model

A Model-driven and Service-oriented framework for the business process improvement

Directory of Open Access Journals (Sweden)

Andrea Delgado

2010-07-01

Full Text Available Business Process Management (BPM importance and benefits for organizations to focus on their business processes is nowadays broadly recognized, as business and technology areas are embracing and adopting the paradigm. The Service Oriented Computing (SOC paradigm bases software development on services to realize business processes. The implementation of business processes as services helps in reducing the gap between these two areas, easing the communication and understanding of business needs. The Model Driven Development (MDD paradigm bases software development in models, metamodels and languages that allow transformation between them. The automatic generation of service models from business process models is a key issue to support the separation of its definition from its technical implementation. In this article, we present MINERVA framework which applies Model Driven Development (MDD and Service Oriented Computing (SOC paradigms to business processes for the continuous business process improvement in organizations, giving support to the stages defined in the business process lifecycle from modeling to evaluation of its execution.

Neutron data for accelerator-driven transmutation technologies. Annual Report 2004/2005

International Nuclear Information System (INIS)

Blomgren, J.; Nilsson, L.; Mermod, P.; Olsson, N.; Pomp, S.; Oehrn, A.; Oesterlund, M.

2005-09-01

The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Dept. of Neutron Research, Uppsala univ. The activities of the group are directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: An article on three-body force effects has been on the top-ten downloading list of Physics Letters B. Uppsala had the largest foreign delegation at the International Conference on Nuclear Data for Science and Technology in Santa Fe, NM, USA, and presented the largest number of papers of all experimental groups. A neutron flux monitor for the new FOI neutron beam facility has been developed, commissioned and taken into regular operation. Within the project, one licentiate exam has been awarded. The new neutron beam facility at TSL has been taken into commercial operation and is now having the largest commercial turnover of all European facilities in the field

Accelerator-driven transmutation technology: a high-tech solution to some nuclear waste problems

International Nuclear Information System (INIS)

Hechanova, A.E.

2001-01-01

This paper discusses current technical and non-technical issues regarding the innovative concept of using accelerator-driven transmutation processes for nuclear waste management. Two complex and related issues are addressed. First, the evolution of the current U.S. conceptual design is identified to indicate that there has been sufficient technological advancement with regard to a 1991 scientific peer review to warrant the advent of a large-scale national research and development program. Second, the economics and politics of the transmutation system are examined to identify non-technical barriers to the implementation of the program. Although a number of key challenges are identified in this paper, the benefits of the research and development effort and the potential paradigm shift in attitude toward resource stewardship could greatly enhance public confidence in nuclear waste management that will have rapid positive repercussions on nuclear technology research and commercial applications. (author)

Machine Learning Applications in Estimating Transformer Loss of Life

OpenAIRE

Majzoobi, Alireza; Mahoor, Mohsen; Khodaei, Amin

2017-01-01

Transformer life assessment and failure diagnostics have always been important problems for electric utility companies. Ambient temperature and load profile are the main factors which affect aging of the transformer insulation, and consequently, the transformer lifetime. The IEEE Std. C57.911995 provides a model for calculating the transformer loss of life based on ambient temperature and transformer's loading. In this paper, this standard is used to develop a data-driven static model for hou...

Lightweight, high-frequency transformers

Science.gov (United States)

Schwarze, G. E.

1983-01-01

The 25-kVA space transformer was developed under contract by Thermal Technology Laboratory, Buffalo, N. Y. The NASA Lewis transformer technology program attempted to develop the baseline technology. For the 25-kVA transformer the input voltage was chosen as 200 V, the output voltage as 1500 V, the input voltage waveform as square wave, the duty cycle as continuous, the frequency range (within certain constraints) as 10 to 40 kHz, the operating temperatures as 85 deg. and 130 C, the baseplate temperature as 50 C, the equivalent leakage inductance as less than 10 micro-h, the operating environment as space, and the life expectancy as 10 years. Such a transformer can also be used for aircraft, ship and terrestrial applications.

AIP conference on accelerator driven transmutation technologies and applications, Las Vegas, Nevada, July 25-29, 1994

International Nuclear Information System (INIS)

Schriber, S.O.; Arthur, E.; Rodriguez, A.A.

1995-01-01

This conference was the first to bring together US and foreign researchers to define Accelerator Driven Transmutation Technology (ADTT) concepts in several important national and international application areas - nuclear waste transmutation, minimizing of world plutonium inventories, and long-term energy production. The conference covered a number of diverse technological areas - accelerators, target/blankets, separations, materials - that make up ADTT systems. The meeting provided one of the first opportunities for specialists in these technologies to meet together and learn about system requirements, components, and interface issues. It was also an opportunity to formulate plans for future developments in ADTT. During the conference over one hundred technical presentations were made describing ADTT system and technology concepts as well as the impact of ADTT on issues related to global plutonium management and the high-level nuclear waste problem areas. Separate abstracts have been entered into the database for articles from this report

AIP conference on accelerator driven transmutation technologies and applications, Las Vegas, Nevada, July 25-29, 1994

Energy Technology Data Exchange (ETDEWEB)

Schriber, S.O.; Arthur, E.; Rodriguez, A.A.

1995-07-01

This conference was the first to bring together US and foreign researchers to define Accelerator Driven Transmutation Technology (ADTT) concepts in several important national and international application areas - nuclear waste transmutation, minimizing of world plutonium inventories, and long-term energy production. The conference covered a number of diverse technological areas - accelerators, target/blankets, separations, materials - that make up ADTT systems. The meeting provided one of the first opportunities for specialists in these technologies to meet together and learn about system requirements, components, and interface issues. It was also an opportunity to formulate plans for future developments in ADTT. During the conference over one hundred technical presentations were made describing ADTT system and technology concepts as well as the impact of ADTT on issues related to global plutonium management and the high-level nuclear waste problem areas. Separate abstracts have been entered into the database for articles from this report.

Technological acceleration and organizational transformations in the upstream oil and gas industry

International Nuclear Information System (INIS)

Isabelle, M.

2000-12-01

The upstream oil and gas industry experienced a dramatic technological acceleration in the early 1970's. The relationships between the agents in this industry have themselves undergone deep changes since that date. This thesis shows that a tight link exists between the technological acceleration and the organizational transformations in the upstream oil and gas industry. In a first part, it focuses on the economic theory's developments concerning industrial organization. In a second part, it applies these developments to three types of relations: those between the owner-states of hydrocarbon resources and the international petroleum companies; those between the international petroleum companies and their subcontractors; and finally those between the international petroleum companies themselves. (author)

A model for information retrieval driven by conceptual spaces

OpenAIRE

Tanase, D.

2015-01-01

A retrieval model describes the transformation of a query into a set of documents. The question is: what drives this transformation? For semantic information retrieval type of models this transformation is driven by the content and structure of the semantic models. In this case, Knowledge Organization Systems (KOSs) are the semantic models that encode the meaning employed for monolingual and cross-language retrieval. The focus of this research is the relationship between these meanings’ repre...

Theory and Model for Martensitic Transformations

DEFF Research Database (Denmark)

Lindgård, Per-Anker; Mouritsen, Ole G.

1986-01-01

Martensitic transformations are shown to be driven by the interplay between two fluctuating strain components. No soft mode is needed, but a central peak occurs representing the dynamics of strain clusters. A two-dimensional magnetic-analog model with the martensitic-transition symmetry is constr......Martensitic transformations are shown to be driven by the interplay between two fluctuating strain components. No soft mode is needed, but a central peak occurs representing the dynamics of strain clusters. A two-dimensional magnetic-analog model with the martensitic-transition symmetry...... is constructed and analyzed by computer simulation and by a theory which accounts for correlation effects. Dramatic precursor effects at the first-order transition are demonstrated. The model is also of relevance for surface reconstruction transitions....

Genetic transformation of peanut (Arachis hypogaea L.) using ...

Indian Academy of Sciences (India)

Madhu

tissue culture response and plant regeneration has driven researchers to develop alternate transformation systems that target axillary meristem in the cotyledonary nodes (Somers et al 2003). We report here for the first time the mode of genetic transformation using cotyledonary node (CN) as an explant in peanut mediated ...

Managing Innovation Probabilities: Core-driven vs. Bottleneck-removing Innovations

OpenAIRE

Tsutomu Harada

2015-01-01

This paper provides a simplified framework of focusing devices that generate different patterns of innovation, i.e., core-driven and bottleneck-removing innovations, and discusses the managerial implications. We show that core-driven innovation should be undertaken when technology components are independent (independent technology system), while bottleneck-removing innovation should be pursued when they are interdependent (interdependent technology system). Different types of focusing device ...

The Structural Consequences of Big Data-Driven Education.

Science.gov (United States)

Zeide, Elana

2017-06-01

Educators and commenters who evaluate big data-driven learning environments focus on specific questions: whether automated education platforms improve learning outcomes, invade student privacy, and promote equality. This article puts aside separate unresolved-and perhaps unresolvable-issues regarding the concrete effects of specific technologies. It instead examines how big data-driven tools alter the structure of schools' pedagogical decision-making, and, in doing so, change fundamental aspects of America's education enterprise. Technological mediation and data-driven decision-making have a particularly significant impact in learning environments because the education process primarily consists of dynamic information exchange. In this overview, I highlight three significant structural shifts that accompany school reliance on data-driven instructional platforms that perform core school functions: teaching, assessment, and credentialing. First, virtual learning environments create information technology infrastructures featuring constant data collection, continuous algorithmic assessment, and possibly infinite record retention. This undermines the traditional intellectual privacy and safety of classrooms. Second, these systems displace pedagogical decision-making from educators serving public interests to private, often for-profit, technology providers. They constrain teachers' academic autonomy, obscure student evaluation, and reduce parents' and students' ability to participate or challenge education decision-making. Third, big data-driven tools define what "counts" as education by mapping the concepts, creating the content, determining the metrics, and setting desired learning outcomes of instruction. These shifts cede important decision-making to private entities without public scrutiny or pedagogical examination. In contrast to the public and heated debates that accompany textbook choices, schools often adopt education technologies ad hoc. Given education

Dynamics of FDI, Technological Transformation and Environmental Degradation in Developing Countries: A Panel Analysis

Directory of Open Access Journals (Sweden)

Farwa Amjad

2016-03-01

Full Text Available This paper examines the relationship between FDI, technology and environment with an assessment of aggregated relationship, by technical composition and the mode of technology transferability through FDI. A panel data for 19 developing countries has been used to for 14 years of data. The empirical results have suggested that FDI is the significant variable in explaining the carbon emission in developing countries followed by energy consumption and technology transformation. Our findings suggest that to manage both energy consumption and FDI flows via investment in research and development (RDY or energy efficiency demand to reduce CO2 emissions is not possible without stringent environmental regulations and without retaining the developing countries’ competitiveness.

Research to practice in addiction treatment: key terms and a field-driven model of technology transfer.

Science.gov (United States)

2011-09-01

The transfer of new technologies (e.g., evidence-based practices) into substance abuse treatment organizations often occurs long after they have been developed and shown to be effective. Transfer is slowed, in part, due to a lack of clear understanding about all that is needed to achieve full implementation of these technologies. Such misunderstanding is exacerbated by inconsistent terminology and overlapping models of an innovation, including its development and validation, dissemination to the public, and implementation or use in the field. For this reason, a workgroup of the Addiction Technology Transfer Center (ATTC) Network developed a field-driven conceptual model of the innovation process that more precisely defines relevant terms and concepts and integrates them into a comprehensive taxonomy. The proposed definitions and conceptual framework will allow for improved understanding and consensus regarding the distinct meaning and conceptual relationships between dimensions of the technology transfer process and accelerate the use of evidence-based practices. Copyright © 2011 Elsevier Inc. All rights reserved.

Transformational leadership in medical practice: capturing and influencing principles-driven work.

Science.gov (United States)

Gabel, Stewart

2012-01-01

The importance of leadership in medicine is well recognized. Transformational leadership is a well-defined model that provides an empirically supported approach to foster organizational and personal change. It has been applied in health care settings with favorable outcomes. Transformational leadership is intended to help subordinates and followers transcend usual expectations of their own capabilities to reach higher levels of performance and personal meaning. The application of transformational leadership is appropriate to physicians in many roles, including to those who are supervisors in medical education or practice as team members in outpatient settings. Illustrations exemplify these points.

Health information technology: transforming chronic disease management and care transitions.

Science.gov (United States)

Rao, Shaline; Brammer, Craig; McKethan, Aaron; Buntin, Melinda B

2012-06-01

Adoption of health information technology (HIT) is a key effort in improving care delivery, reducing costs of health care, and improving the quality of health care. Evidence from electronic health record (EHR) use suggests that HIT will play a significant role in transforming primary care practices and chronic disease management. This article shows that EHRs and HIT can be used effectively to manage chronic diseases, that HIT can facilitate communication and reduce efforts related to transitions in care, and that HIT can improve patient safety by increasing the information available to providers and patients, improving disease management and safety. Copyright © 2012 Elsevier Inc. All rights reserved.

Towards an Experimental Framework for Measuring Usability of Model-Driven Tools

NARCIS (Netherlands)

Panach, Jose Ignacio; Condori-Fernandez, Nelly; Baar, Arthur; Vos, Tanja; Romeu, Ignacio; Pastor, Oscar; Campos, Pedro; Graham, Nicholas; Jorge, Joaquim; Nunes, Nuno; Palanque, Philippe; Winckler, Marco

2011-01-01

According to the Model-Driven Development (MDD) paradigm, analysts can substantially improve the software development process concentrating their efforts on a conceptual model, which can be transformed into code by means of transformation rules applied by a model compiler. However, MDD tools are not

Defense Business Transformation

Science.gov (United States)

2009-12-01

Defense Business Transformation by Jacques S. Gansler and William Lucyshyn The Center for Technology and National...REPORT TYPE 3. DATES COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE Defense Business Transformation 5a. CONTRACT NUMBER 5b. GRANT NUMBER...vii Part One: DoD Business Transformation

ICT, Education Transformation, and Economic Development: An Analysis of the US National Educational Technology Plan

Science.gov (United States)

Kozma, Robert B.

2011-01-01

In support of the conclusions and recommendations in the National Education Technology Plan (NETP), this article makes explicit the connections between the economic rationale used in the plan and the educational transformations it recommends. The article reviews macroeconomic research, microeconomic research, labor market and workforce studies,…

An intellectual property sharing initiative in agricultural biotechnology: development of broadly accessible technologies for plant transformation.

Science.gov (United States)

Chi-Ham, Cecilia L; Boettiger, Sara; Figueroa-Balderas, Rosa; Bird, Sara; Geoola, Josef N; Zamora, Pablo; Alandete-Saez, Monica; Bennett, Alan B

2012-06-01

The Public Intellectual Property Resource for Agriculture (PIPRA) was founded in 2004 by the Rockefeller Foundation in response to concerns that public investments in agricultural biotechnology benefiting developing countries were facing delays, high transaction costs and lack of access to important technologies due to intellectual property right (IPR) issues. From its inception, PIPRA has worked broadly to support a wide range of research in the public sector, in specialty and minor acreage crops as well as crops important to food security in developing countries. In this paper, we review PIPRA's work, discussing the failures, successes, and lessons learned during its years of operation. To address public sector's limited freedom-to-operate, or legal access to third-party rights, in the area of plant transformation, we describe PIPRA's patent 'pool' approach to develop open-access technologies for plant transformation which consolidate patent and tangible property rights in marker-free vector systems. The plant transformation system has been licensed and deployed for both commercial and humanitarian applications in the United States (US) and Africa, respectively. © 2012 The Authors. Plant Biotechnology Journal © 2012 Society for Experimental Biology, Association of Applied Biologists and Blackwell Publishing Ltd.

Improvement in the Physical and Psychological Well-Being of Persons with Spinal Cord Injuries by Means of Powered Wheelchairs Driven by Dual Power Wheels and Mobile Technologies

Directory of Open Access Journals (Sweden)

Yee-Pien Yang

2017-10-01

Full Text Available This study unites researchers from the fields of psychology, occupational therapy, and engineering to improve the holistic physical and psychological well-being of persons with spinal cord injury (SCI by using assistive devices (i.e., wheelchairs and mobile technology (i.e., cell phone and network. These technologies are used to bring persons with SCI through the difficult period of rehabilitation and to return them to their daily life in school or the working environment. First, a SpinoAid Application (APP is developed to motivate persons with SCI to participate in the community after their injury. Second, we integrate mobile technology with a mobility assistive device to design a smart wheelchair, which is innovated by transforming the pushrim of a manually driven wheelchair into a rim motor. After the rim motor is combined with a battery, a brake, and a controller to become a power wheel, two power wheels are installed on both sides of the wheelchair to become a powered wheelchair. Third, a SmartChair APP is developed with the main functions of reminding persons with SCI to perform exercises, recording the physical condition and the wheelchair using status, and building up a social network for information sharing to increase their exercise habit, prevent cumulative injuries or discomfort of the upper extremities, and enhance their health and quality of life.

A model-driven approach for representing clinical archetypes for Semantic Web environments.

Science.gov (United States)

Martínez-Costa, Catalina; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás; Maldonado, José Alberto

2009-02-01

The life-long clinical information of any person supported by electronic means configures his Electronic Health Record (EHR). This information is usually distributed among several independent and heterogeneous systems that may be syntactically or semantically incompatible. There are currently different standards for representing and exchanging EHR information among different systems. In advanced EHR approaches, clinical information is represented by means of archetypes. Most of these approaches use the Archetype Definition Language (ADL) to specify archetypes. However, ADL has some drawbacks when attempting to perform semantic activities in Semantic Web environments. In this work, Semantic Web technologies are used to specify clinical archetypes for advanced EHR architectures. The advantages of using the Ontology Web Language (OWL) instead of ADL are described and discussed in this work. Moreover, a solution combining Semantic Web and Model-driven Engineering technologies is proposed to transform ADL into OWL for the CEN EN13606 EHR architecture.

Transform to Succeed: An Empirical Analysis of Digital Transformation in Firms

OpenAIRE

Sarah E. Stief; Anne Theresa Eidhoff; Markus Voeth

2016-01-01

Despite all progress firms are facing the increasing need to adapt and assimilate digital technologies to transform their business activities in order to pursue business development. By using new digital technologies, firms can implement major business improvements in order to stay competitive and foster new growth potentials. The corresponding phenomenon of digital transformation has received some attention in previous literature in respect to industries such as media and publishing. Neverth...

A survey and comparison of transformation tools based on the transformation tool contest

NARCIS (Netherlands)

Jakumeit, E.; Van Gorp, P.; Buchwald, S.; Rose, L.; Wagelaar, D.; Dan, L.; Hegedüs, Á; Hermannsdörfer, M.; Horn, T.; Kalnina, E.; Krause, C.; Lano, K.; Lepper, M.; Rensink, Arend; Rose, L.M.; Wätzoldt, S.; Mazanek, S.

Model transformation is one of the key tasks in model-driven engineering and relies on the efficient matching and modification of graph-based data structures; its sibling graph rewriting has been used to successfully model problems in a variety of domains. Over the last years, a wide range of graph

The Triangulation Algorithmic: A Transformative Function for Designing and Deploying Effective Educational Technology Assessment Instruments

Science.gov (United States)

Osler, James Edward

2013-01-01

This paper discusses the implementation of the Tri-Squared Test as an advanced statistical measure used to verify and validate the research outcomes of Educational Technology software. A mathematical and epistemological rational is provided for the transformative process of qualitative data into quantitative outcomes through the Tri-Squared Test…

Tunable features of magnetoelectric transformers.

Science.gov (United States)

Dong, Shuxiang; Zhai, Junyi; Priya, Shashank; Li, Jie-Fang; Viehland, Dwight

2009-06-01

We have found that magnetostrictive FeBSiC alloy ribbons laminated with piezoelectric Pb(Zr,Ti)O(3) fiber can act as a tunable transformer when driven under resonant conditions. These composites were also found to exhibit the strongest resonant magnetoelectric voltage coefficient of 750 V/cm-Oe. The tunable features were achieved by applying small dc magnetic biases of -5 transformer features can be attributed to large changes in the piezomagnetic coefficient and permeability of the magnetostrictive phase under H(dc).

Measuring transformers in energy measurement technology

International Nuclear Information System (INIS)

Vock, E.

2009-01-01

This article takes a look at the use of measurement transformers in energy measurement installations in the light of electricity market liberalisation. Such equipment is quoted as being long living and capital-intensive. Increasing requirements on the installation of measurement equipment between partners in a liberalised market are examined. The requirements placed by electricity market legislation on the systems for the various grid voltage levels are discussed. Both current and voltage measurement transformers are looked at and the requirements placed on their accuracy are discussed in detail.

The National Educational Technology Plan Doesn't Live up to Its Call for Revolutionary Transformation

Science.gov (United States)

Rose, Raymond M.

2011-01-01

The National Educational Technology Plan (NETP) calls for the revolutionary transformation of the American educational system. The plan correctly points to the decisions of the late 1800s that still direct educational policy today, and correctly calls the school change efforts evolutionary tinkering. The author, a pioneer in online education…

Battery Fault Detection with Saturating Transformers

Science.gov (United States)

Davies, Francis J. (Inventor); Graika, Jason R. (Inventor)

2013-01-01

A battery monitoring system utilizes a plurality of transformers interconnected with a battery having a plurality of battery cells. Windings of the transformers are driven with an excitation waveform whereupon signals are responsively detected, which indicate a health of the battery. In one embodiment, excitation windings and sense windings are separately provided for the plurality of transformers such that the excitation waveform is applied to the excitation windings and the signals are detected on the sense windings. In one embodiment, the number of sense windings and/or excitation windings is varied to permit location of underperforming battery cells utilizing a peak voltage detector.

Development and Testing the Technology of Complex Transformation of Carbohydrates from Vegetable Raw Materials into Bioethanol

Directory of Open Access Journals (Sweden)

S.P. Tsygankov

2013-07-01

Full Text Available Results of development and testing the tentative technology of sweet sorghum and finger millet processing into bioethanol are described. The carbohydrates content and range of the studied vegetable biomass as the raw material is defined. Bioethanol potential output from sugar sorghum and finger millet carbohydrates and key technological parameters of preparation of both types of vegetable raw material for alcohol fermentation are defined. The concept of the tentative technology of bioethanol production from carbohydrate raw material of the first and second generations is offered. Testing of complex transformation of carbohydrates from vegetable raw materials into bioethanol is performed.

Five key pillars of an analytics center of excellence, which are required to manage populations and transform organizations into the next era of health care.

Science.gov (United States)

Reichert, Jim; Furlong, Gerry

2014-01-01

Acute care facilities are experiencing fiscal challenges as noted by decreasing admissions and lower reimbursement creating an unsustainable fiscal environment as we move into the next era of health care. This situation necessitates a strategy to move away from acting solely on hunches and instinct to using analytics to become a truly data-driven organization that identifies opportunities within patient populations to improve the quality and efficiency of care across the continuum. A brief overview of knowledge management philosophies will be provided and how it is used to enable organizations to leverage data, information, and knowledge for operational transformation leading to improved outcomes. This article outlines the 5 key pillars of an Analytics Center of Excellence; governance, organizational structure, people, process, and technology, that are foundational to the development of this strategy. While culture is the most important factor to achieve organizational transformation and improved care delivery, it is the 5 pillars of the ACoE that will enable the culture shift necessary to become a truly data-driven organization and thus achieve transformation into the next era of health care.

Hadamard Transforms

CERN Document Server

Agaian, Sos; Egiazarian, Karen; Astola, Jaakko

2011-01-01

The Hadamard matrix and Hadamard transform are fundamental problem-solving tools in a wide spectrum of scientific disciplines and technologies, such as communication systems, signal and image processing (signal representation, coding, filtering, recognition, and watermarking), digital logic (Boolean function analysis and synthesis), and fault-tolerant system design. Hadamard Transforms intends to bring together different topics concerning current developments in Hadamard matrices, transforms, and their applications. Each chapter begins with the basics of the theory, progresses to more advanced

Methods of heat transformation for solar facilities in buildings; Verfahren der Waermetransformation fuer die solare Gebaeudetechnik

Energy Technology Data Exchange (ETDEWEB)

Henning, H.M. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Gruppe Aktive Thermische Systeme; Treffinger, P. [Deutsche Zentrum fuer Luft- und Raumfahrt (DLR), Lampoldshausen (Germany). Inst. fuer Technische Thermodynamik

1998-02-01

Processes in which a heat pump cycle is driven by thermal energy may be defined as heat transformation processes. The technical realization of this type of processes in general is based on sorption techniques. Depending on the temperature level of the utilized heat these technologies may be used for either cooling or heating of buildings. The paper presents state-of-the-art technologies and new developments. It comprises solar cooling of buildings, utilization of environmental energy sources (earth, air) by thermal driven heat pumps and seasonal storage of solar thermal energy by means of sorption processes. (orig.) [Deutsch] Unter Waermetransformationsverfahren werden im allgemeinen Verfahren verstanden, in denen ein Waermepumpenprozess mit thermischer Energie angetrieben wird. Die technische Realisierung dieser Verfahren erfolgt ueberwiegend mit Hilfe von Sorptionsvorgaengen. Abhaengig vom Temperaturniveau des Nutzwaermestroms koennen solche Verfahren im Gebaeudebereich fuer die Kuehlung oder Heizung eingesetzt werden. Im Beitrag werden der Stand der Technik sowie neue Entwicklungen vorgestellt. Im einzelnen umfasst der Beitrag die solare Kuehlung von Gebaeuden, die Nutzung von Umweltenergie (Erdreich, Luft) mittels thermisch angetriebener Waermepumpen sowie die saisonale Speicherung von Solarenergie ueber Sorptionsprozesse. (orig.)

Utilization of Information and Communication Technologies in Mathematics Learning

Directory of Open Access Journals (Sweden)

Farzaneh Saadati

2014-07-01

Full Text Available Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students’ perception regarding the use of Information and Communication Technologies (ICT in mathematics learning as well as investigate their opinion about how ICT can be integrated to improve teaching and learning processes. The subjects were Iranian engineering students from two universities. The finding showed they are fully aware of importance of ICT in teaching and learning mathematics. Whilst, they were feeling comfortable and confident with technology, they do not have more experience of using technology in mathematics classes before. The findings supported the other studies, which indicated the potentials of ICT to facilitate students’ learning, improve teaching, and enhance institutional administration as established in the literature.

Changing stress while stressing change: the role of interprofessional education in mediating stress in the introduction of a transformative technology.

Science.gov (United States)

Gillan, Caitlin; Wiljer, David; Harnett, Nicole; Briggs, Kaleigh; Catton, Pamela

2010-11-01

The introduction of a transformative technology into practice settings can affect the functioning of interprofessional teams, placing stress on interprofessional relationships, thus slowing adoption and change. This study explored the potential of an interprofessional education (IPE) approach to mediate this stress and facilitate the adoption of a transformative technology- Image Guided Radiation Therapy (IGRT). Oncologists, physicists, and therapists in radiation medicine who attended an interprofessional IGRT Education Course were interviewed about perceived benefits and stressors to IPE and to interprofessional practice (IPP) in the IGRT context. A modified grounded theory approach was used to conduct 14 interviews, with 200 minutes of interview time recorded. In introducing IGRT, participants noted interprofessional stress in understanding and adopting new technology. IPE offered common terminology, appreciation for others' knowledge, and a holistic framework for practice. Outcomes were thought to foster collaboration, efficiency, and improved professional role definition. Time constraints and power relations were noted to be residual stressors exacerbated by IPE, but were thought to be transient. IPE can thus be of benefit in the implementation of transformative technologies such as IGRT, through mediation of interprofessional stress inherent in change. Interprofessional knowledge, collaboration, and efficiency in practice facilitate the development and adoption of a new practice model.

Comments to accelerator-driven system

International Nuclear Information System (INIS)

Taka aki, Matsumoto

2003-01-01

Accelerator-driven system (ADS) that was a subcritical nuclear reactor driven by a high power proton accelerator was recently studied by several large organisations over the world. This paper described two comments for ADS: philosophical and technological ones. The latter was made from a view point of micro ball lightning (BL) that was newly discovered by the author. Negative and positive aspects of micro BL for ADS were discussed. (author)

From State Dependent Diffusion to Constant Diffusion in Stochastic Differential Equations by the Lamperti Transform

DEFF Research Database (Denmark)

Møller, Jan Kloppenborg; Madsen, Henrik

the Lamperti transform. This note gives an example driven introduction to the Lamperti transform. The general applicability of the Lamperti transform is limited to univariate diffusion processes, but for a restricted class of multivariate diffusion processes Lamperti type transformations are available...

Uncovering the intrinsic size dependence of hydriding phase transformations in nanocrystals.

Science.gov (United States)

Bardhan, Rizia; Hedges, Lester O; Pint, Cary L; Javey, Ali; Whitelam, Stephen; Urban, Jeffrey J

2013-10-01

A quantitative understanding of nanocrystal phase transformations would enable more efficient energy conversion and catalysis, but has been hindered by difficulties in directly monitoring well-characterized nanoscale systems in reactive environments. We present a new in situ luminescence-based probe enabling direct quantification of nanocrystal phase transformations, applied here to the hydriding transformation of palladium nanocrystals. Our approach reveals the intrinsic kinetics and thermodynamics of nanocrystal phase transformations, eliminating complications of substrate strain, ligand effects and external signal transducers. Clear size-dependent trends emerge in nanocrystals long accepted to be bulk-like in behaviour. Statistical mechanical simulations show these trends to be a consequence of nanoconfinement of a thermally driven, first-order phase transition: near the phase boundary, critical nuclei of the new phase are comparable in size to the nanocrystal itself. Transformation rates are then unavoidably governed by nanocrystal dimensions. Our results provide a general framework for understanding how nanoconfinement fundamentally impacts broad classes of thermally driven solid-state phase transformations relevant to hydrogen storage, catalysis, batteries and fuel cells.

ATLAS Job Transforms

CERN Document Server

Stewart, G A; The ATLAS collaboration; Maddocks, H J; Harenberg, T; Sandhoff, M; Sarrazin, B

2013-01-01

The need to run complex workflows for a high energy physics experiment such as ATLAS has always been present. However, as computing resources have become even more constrained, compared to the wealth of data generated by the LHC, the need to use resources efficiently and manage complex workflows within a single grid job have increased. In ATLAS, a new Job Transform framework has been developed that we describe in this paper. This framework manages the multiple execution steps needed to `transform' one data type into another (e.g., RAW data to ESD to AOD to final ntuple) and also provides a consistent interface for the ATLAS production system. The new framework uses a data driven workflow definition which is both easy to manage and powerful. After a transform is defined, jobs are expressed simply by specifying the input data and the desired output data. The transform infrastructure then executes only the necessary substeps to produce the final data products. The global execution cost of running the job is mini...

ATLAS Job Transforms

CERN Document Server

Stewart, G A; The ATLAS collaboration; Maddocks, H J; Harenberg, T; Sandhoff, M; Sarrazin, B

2013-01-01

The need to run complex workflows for a high energy physics experiment such as ATLAS has always been present. However, as computing resources have become even more constrained, compared to the wealth of data generated by the LHC, the need to use resources efficiently and manage complex workflows within a single grid job have increased. In ATLAS, a new Job Transform framework has been developed that we describe in this paper. This framework manages the multiple execution steps needed to 'transform' one data type into another (e.g., RAW data to ESD to AOD to final ntuple) and also provides a consistent interface for the ATLAS production system. The new framework uses a data driven workflow definition which is both easy to manage and powerful. After a transform is defined, jobs are expressed simply by specifying the input data and the desired output data. The transform infrastructure then executes only the necessary substeps to produce the final data products. The global execution cost of running the job is mini...

Appreciative inquiry for leading in complex systems: supporting the transformation of academic nursing culture.

Science.gov (United States)

Moody, Roseanne C; Horton-Deutsch, Sara; Pesut, Daniel J

2007-07-01

Increasingly complex environments in which nurse educators must function create distinct challenges for leaders in nursing education. Complexity is found in the presence of knowledge-driven economies, advancements in technology, and the blurring of campus boundaries created by online learning versus traditional classroom education. A dual bureaucracy of faculty and administration coexists in nursing education. The transformation of bureaucratic culture is a strategic challenge for academic leaders who strive to move dichotomous groups toward a collective vision of a preferred future. This article advocates for the affirmative administrative process of appreciative inquiry for academic nursing leadership, in nudging the dual bureaucracy toward transformational change. The intent and characteristics of appreciative inquiry are discussed, appreciative leadership strategies and actions are explained, methods for leading cultural paradigm shift are outlined, and an exemplar of the actualization of appreciative inquiry is presented.

Photonic Mach-Zehnder modulators driven by surface acoustic waves in AlGaAs technology

Science.gov (United States)

Crespo-Poveda, A.; Gargallo, B.; Artundo, I.; Doménech, J. D.; Muñoz, P.; Hey, R.; Biermann, K.; Tahraoui, A.; Santos, P. V.; Cantarero, A.; de Lima, M. M.

2014-03-01

In this paper, photonic devices driven by surface acoustic waves and operating in the GHz frequency range are presented. The devices were designed and fabricated in (Al,Ga)As technology. In contrast to previously realized modulators, where part of the light transmission is lost due to destructive interference, in the present devices light only switches paths, avoiding losses. One of the devices presents two output channels with 180°-dephasing synchronization. Odd multiples of the fundamental driving frequency are enabled by adjusting the applied acoustic power. A second and more complex photonic integrated device, based on the acoustic modulation of tunable Arrayed Waveguide Gratings, is also proposed.

"Just Say It Like It Is!" Use of a Community-Based Participatory Approach to Develop a Technology-Driven Food Literacy Program for Adolescents.

Science.gov (United States)

Wickham, Catherine A; Carbone, Elena T

2018-01-01

FuelUp&Go! is a technology-driven food literacy program consisting of six in-person skill building sessions as well as fitness trackers, text messages, and a companion website. A community-based participatory research approach was used with adolescents who were recruited to participate in a Kid Council. Qualitative data were collected about the use of surveys, program activities, recipes, technology and text messages, and music and incentives. Changes suggested by Kid Councilmembers informed the design and development of a pilot program. Participants were recruited for the pilot program and completed pre- and postintervention surveys. The results indicated food-related knowledge remained low but increased from baseline to follow-up. Attitudes toward vegetables and physical activity increased slightly. Self-reported participation in physical activity and consumption of sugar-added beverages moved in positive directions. These findings suggest that community-based participatory research approach is an effective approach to engage adolescents in the development of a technology-driven food literacy program.

Model Validation in Ontology Based Transformations

Directory of Open Access Journals (Sweden)

Jesús M. Almendros-Jiménez

2012-10-01

Full Text Available Model Driven Engineering (MDE is an emerging approach of software engineering. MDE emphasizes the construction of models from which the implementation should be derived by applying model transformations. The Ontology Definition Meta-model (ODM has been proposed as a profile for UML models of the Web Ontology Language (OWL. In this context, transformations of UML models can be mapped into ODM/OWL transformations. On the other hand, model validation is a crucial task in model transformation. Meta-modeling permits to give a syntactic structure to source and target models. However, semantic requirements have to be imposed on source and target models. A given transformation will be sound when source and target models fulfill the syntactic and semantic requirements. In this paper, we present an approach for model validation in ODM based transformations. Adopting a logic programming based transformational approach we will show how it is possible to transform and validate models. Properties to be validated range from structural and semantic requirements of models (pre and post conditions to properties of the transformation (invariants. The approach has been applied to a well-known example of model transformation: the Entity-Relationship (ER to Relational Model (RM transformation.

Basis and objectives of the Los Alamos Accelerator-Driven Transmutation Technology Project

International Nuclear Information System (INIS)

Bowman, C.D.

1995-01-01

The Accelerator-Driven Transmutation Technology (ADTT) Project carries three approaches for dealing with waste from the defense and commercial nuclear energy enterprise. First, the problem of excess weapons plutonium in the US and Russia originating both from stockpile reductions and from defense production site clean-up is one of significant current and long-term concern. The ADTT technology offers the possibility of almost complete destruction of this plutonium by fission. The technology might be particularly effective for destruction of the low quality plutonium from defense site clean-up since the system does not require the fabrication of the waste into fuel assemblies, does not require reprocessing and refabrication, and can tolerate a high level of impurities in the feed stream. Second, the ADTT system also can destroy the plutonium, other higher actinide, and long-lived fission product from commercial nuclear waste which now can only be dealt with by geologic storage. And finally, and probably most importantly the system can be used for the production of virtually unlimited electric power from thorium with concurrent destruction of its long-lived waste components so that geologic containment for them is not required. In addition plutonium is not a significant byproduct of the power generation so that non-proliferation concerns about nuclear power are almost completely eliminated. All of the ADTT systems operate with an accelerator supplementing the neutrons which in reactors are provided only by the fission process, and therefore the system can be designed to eliminate the possibility for a runaway chain reaction. The means for integration of the accelerator into nuclear power technology in order to make these benefits possible is described including estimates of accelerator operating parameters required for the three objectives

Basis and objectives of the Los Alamos Accelerator-Driven Transmutation technology project

Science.gov (United States)

Bowman, Charles D.

1995-09-01

The Accelerator-Driven Transmutation Technology (ADTT) Project carries three approaches for dealing with waste from the defense and commercial nuclear energy enterprise. First, the problem of excess weapons plutonium in the U.S. and Russia originating both from stockpile reductions and from defense production site clean-up is one of significant current and long-term concern. The ADTT technology offers the possibility of almost complete destruction of this plutonium by fission. The technology might be particularly effective for destruction of the low quality plutonium from defense site clean-up since the system does not require the fabrication of the waste into fuel assemblies, does not require reprocessing and refabrication, and can tolerate a high level of impurities in the feed stream. Second, the ADTT system also can destroy the plutonium, other higher actinide, and long-lived fission product from commercial nuclear waste which now can only be dealt with by geologic storage. And finally, and probably most importantly the system can be used for the production of virtually unlimited electric power from thorium with concurrent destruction of its long-lived waste components so that geologic containment for them is not required. In addition plutonium is not a significant byproduct of the power generation so that non-proliferation concerns about nuclear power are almost completely eliminated. All of the ADTT systems operate with an accelerator supplementing the neutrons which in reactors are provided only by the fission process, and therefore the system can be designed to eliminate the possibility for a runaway chain reaction. The means for integration of the accelerator into nuclear power technology in order to make these benefits possible is described including estimates of accelerator operating parameters required for the three objectives.

Richter transformation driven by Epstein-Barr virus reactivation during therapy-related immunosuppression in chronic lymphocytic leukaemia.

Science.gov (United States)

García-Barchino, Maria J; Sarasquete, Maria E; Panizo, Carlos; Morscio, Julie; Martinez, Antonio; Alcoceba, Miguel; Fresquet, Vicente; Gonzalez-Farre, Blanca; Paiva, Bruno; Young, Ken H; Robles, Eloy F; Roa, Sergio; Celay, Jon; Larrayoz, Marta; Rossi, Davide; Gaidano, Gianluca; Montes-Moreno, Santiago; Piris, Miguel A; Balanzategui, Ana; Jimenez, Cristina; Rodriguez, Idoia; Calasanz, Maria J; Larrayoz, Maria J; Segura, Victor; Garcia-Muñoz, Ricardo; Rabasa, Maria P; Yi, Shuhua; Li, Jianyong; Zhang, Mingzhi; Xu-Monette, Zijun Y; Puig-Moron, Noemi; Orfao, Alberto; Böttcher, Sebastian; Hernandez-Rivas, Jesus M; Miguel, Jesus San; Prosper, Felipe; Tousseyn, Thomas; Sagaert, Xavier; Gonzalez, Marcos; Martinez-Climent, Jose A

2018-05-01

The increased risk of Richter transformation (RT) in patients with chronic lymphocytic leukaemia (CLL) due to Epstein-Barr virus (EBV) reactivation during immunosuppressive therapy with fludarabine other targeted agents remains controversial. Among 31 RT cases classified as diffuse large B-cell lymphoma (DLBCL), seven (23%) showed EBV expression. In contrast to EBV - tumours, EBV + DLBCLs derived predominantly from IGVH-hypermutated CLL, and they also showed CLL-unrelated IGVH sequences more frequently. Intriguingly, despite having different cellular origins, clonally related and unrelated EBV + DLBCLs shared a previous history of immunosuppressive chemo-immunotherapy, a non-germinal centre DLBCL phenotype, EBV latency programme type II or III, and very short survival. These data suggested that EBV reactivation during therapy-related immunosuppression can transform either CLL cells or non-tumoural B lymphocytes into EBV + DLBCL. To investigate this hypothesis, xenogeneic transplantation of blood cells from 31 patients with CLL and monoclonal B-cell lymphocytosis (MBL) was performed in Rag2 -/- IL2γc -/- mice. Remarkably, the recipients' impaired immunosurveillance favoured the spontaneous outgrowth of EBV + B-cell clones from 95% of CLL and 64% of MBL patients samples, but not from healthy donors. Eventually, these cells generated monoclonal tumours (mostly CLL-unrelated but also CLL-related), recapitulating the principal features of EBV + DLBCL in patients. Accordingly, clonally related and unrelated EBV + DLBCL xenografts showed indistinguishable cellular, virological and molecular features, and synergistically responded to combined inhibition of EBV replication with ganciclovir and B-cell receptor signalling with ibrutinib in vivo. Our study underscores the risk of RT driven by EBV in CLL patients receiving immunosuppressive therapies, and provides the scientific rationale for testing ganciclovir and ibrutinib in EBV + DLBCL. Copyright © 2018 Pathological

Synchrotron-driven spallation sources

CERN Document Server

Bryant, P J

1996-01-01

The use of synchrotrons for pulsed neutron spallation sources is an example of scientific and technological spin-off from the accelerator development for particle physics. Accelerator-driven sources provide an alternative to the continuous-flux, nuclear reactors that currently furnish the majority of neutrons for research and development. Although the present demand for neutrons can be adequately met by the existing reactors, this situation is unlikely to continue due to the increasing severity of safety regulations and the declared policies of many countries to close down their reactors within the next decade or so. Since the demand for neutrons as a research tool is, in any case,expected to grow, there has been a corresponding interest in sources that are synchrotron-driven or linac-driven with a pulse compression ring and currently several design studies are being made. These accelerator-driven sources also have the advantage of a time structure with a high peak neutron flux. The basic requirement is for a...

Data-Driven Diffusion Of Innovations: Successes And Challenges In 3 Large-Scale Innovative Delivery Models.

Science.gov (United States)

Dorr, David A; Cohen, Deborah J; Adler-Milstein, Julia

2018-02-01

Failed diffusion of innovations may be linked to an inability to use and apply data, information, and knowledge to change perceptions of current practice and motivate change. Using qualitative and quantitative data from three large-scale health care delivery innovations-accountable care organizations, advanced primary care practice, and EvidenceNOW-we assessed where data-driven innovation is occurring and where challenges lie. We found that implementation of some technological components of innovation (for example, electronic health records) has occurred among health care organizations, but core functions needed to use data to drive innovation are lacking. Deficits include the inability to extract and aggregate data from the records; gaps in sharing data; and challenges in adopting advanced data functions, particularly those related to timely reporting of performance data. The unexpectedly high costs and burden incurred during implementation of the innovations have limited organizations' ability to address these and other deficits. Solutions that could help speed progress in data-driven innovation include facilitating peer-to-peer technical assistance, providing tailored feedback reports to providers from data aggregators, and using practice facilitators skilled in using data technology for quality improvement to help practices transform. Policy efforts that promote these solutions may enable more rapid uptake of and successful participation in innovative delivery system reforms.

Scientific Knowledge and Technology, Animal Experimentation, and Pharmaceutical Development.

Science.gov (United States)

Kinter, Lewis B; DeGeorge, Joseph J

2016-12-01

Human discovery of pharmacologically active substances is arguably the oldest of the biomedical sciences with origins >3500 years ago. Since ancient times, four major transformations have dramatically impacted pharmaceutical development, each driven by advances in scientific knowledge, technology, and/or regulation: (1) anesthesia, analgesia, and antisepsis; (2) medicinal chemistry; (3) regulatory toxicology; and (4) targeted drug discovery. Animal experimentation in pharmaceutical development is a modern phenomenon dating from the 20th century and enabling several of the four transformations. While each transformation resulted in more effective and/or safer pharmaceuticals, overall attrition, cycle time, cost, numbers of animals used, and low probability of success for new products remain concerns, and pharmaceutical development remains a very high risk business proposition. In this manuscript we review pharmaceutical development since ancient times, describe its coevolution with animal experimentation, and attempt to predict the characteristics of future transformations. © The Author 2016. Published by Oxford University Press on behalf of the Institute for Laboratory Animal Research. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Efficiency of wave-driven rigid body rotation toroidal confinement

Science.gov (United States)

Rax, J. M.; Gueroult, R.; Fisch, N. J.

2017-03-01

The compensation of vertical drifts in toroidal magnetic fields through a wave-driven poloidal rotation is compared with compensation through the wave driven toroidal current generation to support the classical magnetic rotational transform. The advantages and drawbacks associated with the sustainment of a radial electric field are compared with those associated with the sustainment of a poloidal magnetic field both in terms of energy content and power dissipation. The energy content of a radial electric field is found to be smaller than the energy content of a poloidal magnetic field for a similar set of orbits. The wave driven radial electric field generation efficiency is similarly shown, at least in the limit of large aspect ratio, to be larger than the efficiency of wave-driven toroidal current generation.

Military Health System Transformation Implications on Health Information Technology Modernization.

Science.gov (United States)

Khan, Saad

2018-03-01

With the recent passage of the National Defense Authorization Act for Fiscal Year 2017, Congress has triggered groundbreaking Military Health System organizational restructuring with the Defense Health Agency assuming responsibility for managing all hospitals and clinics owned by the Army, Navy, and Air Force. This is a major shift toward a modern value-based managed care system, which will require much greater military-civilian health care delivery integration to be in place by October 2018. Just before the National Defense Authorization Act for Fiscal Year 2017 passage, the Department of Defense had already begun a seismic shift and awarded a contract for the new Military Health System-wide electronic health record system. In this perspective, we discuss the implications of the intersection of two large-scope and large-scale initiatives, health system transformation, and information technology modernization, being rolled out in the largest and most complex federal agency and potential risk mitigating steps. The Military Health System will require an expanded unified clinical leadership to spearhead short-term transformation; furthermore, developing, organizing, and growing a cadre of informatics expertise to expand the use and diffusion of novel solutions such as health information exchanges, data analytics, and others to transcend organizational barriers are still needed to achieve the long-term aim of health system reform as envisioned by the National Defense Authorization Act for Fiscal Year 2017.

The patron-driven library a practical guide for managing collections and services in the digital age

CERN Document Server

Allison, Dee Ann

2013-01-01

Libraries in the USA and globally are undergoing quiet revolution. Libraries are moving away from a philosophy that is collection-centered to one focused on service. Technology is key to that change. The Patron Driven Library explores the way technology has moved the focus from library collections to services, placing the reader at the center of library activities. The book reveals the way library users are changing, and how social networking, web delivery of information, and the uncertain landscape of e-print has energized librarians to adopt technology to meet a different model of the library while preserving core values. Following an introduction, the first part begins with the historical milieu, and moves on to current challenges for financing and acquiring materials, and an exploration of why the millennial generation is transformational. The second part examines how changes in library practice can create a culture for imagining library services in an age of information overflow. The final chapter asks: ...

Integrating Usability Evaluation into Model-Driven Video Game Development

OpenAIRE

Fernandez , Adrian; Insfran , Emilio; Abrahão , Silvia; Carsí , José ,; Montero , Emanuel

2012-01-01

Part 3: Short Papers; International audience; The increasing complexity of video game development highlights the need of design and evaluation methods for enhancing quality and reducing time and cost. In this context, Model-Driven Development approaches seem to be very promising since a video game can be obtained by transforming platform-independent models into platform-specific models that can be in turn transformed into code. Although this approach is started to being used for video game de...

Designing for Transformations in Collaboration

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Bossen, Claus; Thomsen, Anders Bo

2005-01-01

Transformations in collaborative work due to the introduction of new technology are inevitable, but are often difficult to study. In this paper, we consider the patterns of transformation that are seen in a patient-physician relationship based on the introduction of homecare monitoring equipment....... We report findings from interviews and fieldwork with patients and physicians participating in a clinical experiment of homecare monitoring. By studying both the group of patients who receive homecare-based treatment and the control group we were able to identify transformations in the collaborative...... activity as caused by the homecare monitoring technology. We apply activity theory as a theoretical basis for this analysis. We consider the implications of these findings for the design of pervasive health monitoring technologies....

Neonatal Informatics: Transforming Neonatal Care Through Translational Bioinformatics

Science.gov (United States)

Palma, Jonathan P.; Benitz, William E.; Tarczy-Hornoch, Peter; Butte, Atul J.; Longhurst, Christopher A.

2012-01-01

The future of neonatal informatics will be driven by the availability of increasingly vast amounts of clinical and genetic data. The field of translational bioinformatics is concerned with linking and learning from these data and applying new findings to clinical care to transform the data into proactive, predictive, preventive, and participatory health. As a result of advances in translational informatics, the care of neonates will become more data driven, evidence based, and personalized. PMID:22924023

Information-Driven Inspections

International Nuclear Information System (INIS)

Laughter, Mark D.; Whitaker, J. Michael; Lockwood, Dunbar

2010-01-01

New uranium enrichment capacity is being built worldwide in response to perceived shortfalls in future supply. To meet increasing safeguards responsibilities with limited resources, the nonproliferation community is exploring next-generation concepts to increase the effectiveness and efficiency of safeguards, such as advanced technologies to enable unattended monitoring of nuclear material. These include attribute measurement technologies, data authentication tools, and transmission and security methods. However, there are several conceptual issues with how such data would be used to improve the ability of a safeguards inspectorate such as the International Atomic Energy Agency (IAEA) to reach better safeguards conclusions regarding the activities of a State. The IAEA is pursuing the implementation of information-driven safeguards, whereby all available sources of information are used to make the application of safeguards more effective and efficient. Data from continuous, unattended monitoring systems can be used to optimize on-site inspection scheduling and activities at declared facilities, resulting in fewer, better inspections. Such information-driven inspections are the logical evolution of inspection planning - making use of all available information to enhance scheduled and randomized inspections. Data collection and analysis approaches for unattended monitoring systems can be designed to protect sensitive information while enabling information-driven inspections. A number of such inspections within a predetermined range could reduce inspection frequency while providing an equal or greater level of deterrence against illicit activity, all while meeting operator and technology holder requirements and reducing inspector and operator burden. Three options for using unattended monitoring data to determine an information-driven inspection schedule are to (1) send all unattended monitoring data off-site, which will require advances in data analysis techniques to

Preface [HD3-2015: International meeting on high-dimensional data-driven science

International Nuclear Information System (INIS)

2016-01-01

A never-ending series of innovations in measurement technology and evolutions in information and communication technologies have led to the ongoing generation and accumulation of large quantities of high-dimensional data every day. While detailed data-centric approaches have been pursued in respective research fields, situations have been encountered where the same mathematical framework of high-dimensional data analysis can be found in a wide variety of seemingly unrelated research fields, such as estimation on the basis of undersampled Fourier transform in nuclear magnetic resonance spectroscopy in chemistry, in magnetic resonance imaging in medicine, and in astronomical interferometry in astronomy. In such situations, bringing diverse viewpoints together therefore becomes a driving force for the creation of innovative developments in various different research fields. This meeting focuses on “Sparse Modeling” (SpM) as a methodology for creation of innovative developments through the incorporation of a wide variety of viewpoints in various research fields. The objective of this meeting is to offer a forum where researchers with interest in SpM can assemble and exchange information on the latest results and newly established methodologies, and discuss future directions of the interdisciplinary studies for High-Dimensional Data-Driven science (HD 3 ). The meeting was held in Kyoto from 14-17 December 2015. We are pleased to publish 22 papers contributed by invited speakers in this volume of Journal of Physics: Conference Series. We hope that this volume will promote further development of High-Dimensional Data-Driven science. (paper)

Fenton-Driven Regeneration of MTBE-spent Granular Activated Carbon

Science.gov (United States)

Fenton-driven regeneration of Methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC) involves the combined, synergistic use of two treatment technologies: adsorption of organic chemicals onto activated carbon and Fenton-driven oxidation regeneration of the spent-GAC...

The right tool for the right job : assessing model transformation quality

NARCIS (Netherlands)

Amstel, van M.F.

2010-01-01

Model-Driven Engineering (MDE) is a software engineering discipline in which models play a central role. One of the key concepts of MDE is model transformations. Because of the crucial role of model transformations in MDE, they have to be treated in a similar way as traditional software artifacts.

Periodically Driven Array of Single Rydberg Atoms

Science.gov (United States)

Basak, Sagarika; Chougale, Yashwant; Nath, Rejish

2018-03-01

An array of single Rydberg atoms driven by a temporally modulated atom-field detuning is studied. The periodic modulation effectively modifies the Rabi coupling, leading to unprecedented dynamics in the presence of Rydberg-Rydberg interactions, in particular, blockade enhancement, antiblockades, and state-dependent population trapping. Interestingly, the Schrieffer-Wolf transformation reveals a fundamental process in Rydberg gases, correlated Rabi coupling, which stems from the extended nature of the Rydberg-Rydberg interactions. Also, the correlated coupling provides an alternative depiction for the Rydberg blockade, exhibiting a nontrivial behavior in the presence of periodic modulation. The dynamical localization of a many-body configuration in a driven Rydberg lattice is discussed.

A beamline systems model for Accelerator-Driven Transmutation Technology (ADTT) facilities

Energy Technology Data Exchange (ETDEWEB)

Todd, A.M.M.; Paulson, C.C.; Peacock, M.A. [Grumman Research and Development Center, Princeton, NJ (United States)] [and others

1995-10-01

A beamline systems code, that is being developed for Accelerator-Driven Transmutation Technology (ADTT) facility trade studies, is described. The overall program is a joint Grumman, G.H. Gillespie Associates (GHGA) and Los Alamos National Laboratory effort. The GHGA Accelerator Systems Model (ASM) has been adopted as the framework on which this effort is based. Relevant accelerator and beam transport models from earlier Grumman systems codes are being adapted to this framework. Preliminary physics and engineering models for each ADTT beamline component have been constructed. Examples noted include a Bridge Coupled Drift Tube Linac (BCDTL) and the accelerator thermal system. A decision has been made to confine the ASM framework principally to beamline modeling, while detailed target/blanket, balance-of-plant and facility costing analysis will be performed externally. An interfacing external balance-of-plant and facility costing model, which will permit the performance of iterative facility trade studies, is under separate development. An ABC (Accelerator Based Conversion) example is used to highlight the present models and capabilities.

A beamline systems model for Accelerator-Driven Transmutation Technology (ADTT) facilities

International Nuclear Information System (INIS)

Todd, Alan M. M.; Paulson, C. C.; Peacock, M. A.; Reusch, M. F.

1995-01-01

A beamline systems code, that is being developed for Accelerator-Driven Transmutation Technology (ADTT) facility trade studies, is described. The overall program is a joint Grumman, G. H. Gillespie Associates (GHGA) and Los Alamos National Laboratory effort. The GHGA Accelerator Systems Model (ASM) has been adopted as the framework on which this effort is based. Relevant accelerator and beam transport models from earlier Grumman systems codes are being adapted to this framework. Preliminary physics and engineering models for each ADTT beamline component have been constructed. Examples noted include a Bridge Coupled Drift Tube Linac (BCDTL) and the accelerator thermal system. A decision has been made to confine the ASM framework principally to beamline modeling, while detailed target/blanket, balance-of-plant and facility costing analysis will be performed externally. An interfacing external balance-of-plant and facility costing model, which will permit the performance of iterative facility trade studies, is under separate development. An ABC (Accelerator Based Conversion) example is used to highlight the present models and capabilities

Progress of cereal transformation technology mediated by Agrobacterium tumefaciens

Directory of Open Access Journals (Sweden)

Yukoh eHiei

2014-11-01

Full Text Available Monocotyledonous plants were believed to be not transformable by the soil bacterium Agrobacterium tumefaciens until two decades ago, although convenient protocols for infection of leaf disks and subsequent regeneration of transgenic plants had been well established in a number of dicotyledonous species by then. This belief was reinforced by the fact that monocotyledons are mostly outside the host range of crown gall disease caused by the bacterium and by the failures in trials in monocotyledons to mimic the transformation protocols for dicotyledons. However, a key reason for the failure could have been the lack of active cell divisions at the wound sites, which are the basis of tissue culture and transformation in dicotyledons, in monocotyledons. The complexity and narrow optimal windows of critical factors, such as genotypes of plants, conditions of the plants from which explants are prepared, tissue culture methods and culture media, pre-treatments of explants, strains of A. tumefaciens, inducers of virulence genes, transformation vectors, selection marker genes and selective agents, kept technical hurdles high. Eventually it was determined that rice and maize could be transformed by co-cultivating cells of callus cultures or immature embryos, which are actively dividing or about to divide, with A. tumefaciens. Subsequently, these initial difficulties were resolved one by one by many research groups, and the major cereals are now transformed quite efficiently. As many as 15 independent transgenic events may be regenerated from a single piece of immature embryo of rice. Maize transformation protocols are well established, and almost all transgenic events deregulated for commercialization after 2003 were generated by Agrobacterium-mediated transformation. Wheat, barley and sorghum are also among those plants that can be efficiently transformed by A. tumefaciens.

Proton-driven Plasma Wakefield Acceleration

CERN Multimedia

CERN. Geneva

2012-01-01

The construction of ever larger and costlier accelerator facilities has a limited future, and new technologies will be needed to push the energy frontier. Plasma wakefield acceleration is a rapidly developing field and is a promising candidate technology for future high energy colliders. We focus on the recently proposed idea of proton-driven plasma wakefield acceleration and describe the current status and plans for this approach.

Electrical transformer handbook

Energy Technology Data Exchange (ETDEWEB)

Hurst, R.W.; Horne, D. (eds.)

2005-07-01

This handbook is a valuable user guide intended for electrical engineering and maintenance personnel, electrical contractors and electrical engineering students. It provides current information on techniques and technologies that can help extend the life of transformers. It discusses transformer testing, monitoring, design, commissioning, retrofitting and other elements involved in keeping electrical transformers in safe and efficient operation. It demonstrates how a power transformer can be put to use and common problems faced by owners. In addition to covering control techniques, testing and maintenance procedures, this handbook covers the power transformer; control electrical power transformer; electrical power transformer; electrical theory transformer; used electrical transformer; down electrical step transformer; electrical manufacturer transformer; electrical picture transformer; electrical transformer work; electrical surplus transformer; current transformer; step down transformer; voltage transformer; step up transformer; isolation transformer; low voltage transformer; toroidal transformer; high voltage transformer; and control power transformer. The handbook includes articles from leading experts on overcurrent protection of transformers; ventilated dry-type transformers; metered load factors for low-voltage, and dry-type transformers in buildings. The maintenance of both dry-type or oil-filled transformers was discussed with reference to sealing, gaskets, oils, moisture and testing. The adoption of dynamic load practices was also discussed along with the reclamation or recycling of used lube oil, transformer dielectric fluids and aged solid insulation. A buyer's guide and directory of transformer manufacturers and suppliers was also included. refs., tabs., figs.

Electrically Driven Technologies for Radioactive Aerosol Abatement

Energy Technology Data Exchange (ETDEWEB)

David W. DePaoli; Ofodike A. Ezekoye; Costas Tsouris; Valmor F. de Almeida

2003-01-28

The purpose of this research project was to develop an improved understanding of how electriexecy driven processes, including electrocoalescence, acoustic agglomeration, and electric filtration, may be employed to efficiently treat problems caused by the formation of aerosols during DOE waste treatment operations. The production of aerosols during treatment and retrieval operations in radioactive waste tanks and during thermal treatment operations such as calcination presents a significant problem of cost, worker exposure, potential for release, and increased waste volume.

Thermo-driven microcrawlers fabricated via a microfluidic approach

International Nuclear Information System (INIS)

Wang Wei; Yao Chen; Zhang Maojie; Ju Xiaojie; Xie Rui; Chu Liangyin

2013-01-01

A novel thermo-driven microcrawler that can transform thermal stimuli into directional mechanical motion is developed by a simple microfluidic approach together with emulsion-template synthesis. The microcrawler is designed with a thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) hydrogel body and a bell-like structure with an eccentric cavity. The asymmetric shrinking–swelling circulation of the microcrawlers enables a thermo-driven locomotion responding to repeated temperature changes, which provides a novel model with symmetry breaking principle for designing biomimetic soft microrobots. The microfluidic approach offers a novel and promising platform for design and fabrication of biomimetic soft microrobots. (paper)

Fourier Transform Mass Spectrometry

Science.gov (United States)

Scigelova, Michaela; Hornshaw, Martin; Giannakopulos, Anastassios; Makarov, Alexander

2011-01-01

This article provides an introduction to Fourier transform-based mass spectrometry. The key performance characteristics of Fourier transform-based mass spectrometry, mass accuracy and resolution, are presented in the view of how they impact the interpretation of measurements in proteomic applications. The theory and principles of operation of two types of mass analyzer, Fourier transform ion cyclotron resonance and Orbitrap, are described. Major benefits as well as limitations of Fourier transform-based mass spectrometry technology are discussed in the context of practical sample analysis, and illustrated with examples included as figures in this text and in the accompanying slide set. Comparisons highlighting the performance differences between the two mass analyzers are made where deemed useful in assisting the user with choosing the most appropriate technology for an application. Recent developments of these high-performing mass spectrometers are mentioned to provide a future outlook. PMID:21742802

Land Use Transformation Rule Analysis in Beijing-Tianjin-Tangshan Region Using Remote Sensing and GIS Technology

Directory of Open Access Journals (Sweden)

Shang-min Zhao

2016-01-01

Full Text Available Based on land use classification system, this paper acquires the land use distribution status at 2000, 2005, and 2010 in Beijing-Tianjin-Tangshan Region using remote sensing images, field survey data, images in Google Earth, and visual interpretation methods. Then, the land use transformation rules from 2000 to 2010 are achieved using GIS (geographic information system technology. The research results shows the following: (1 as to the distribution area of the land use types, dry field has the largest area, followed by forest land, building land, paddy field, water area, grassland, and unused land; (2 from 2000 to 2010, the area of building land has the largest increase, which is mainly transformed from cropland and sea reclamation area; the largest decreased land use type is paddy field, which mainly transforms to dry field and building land; (3 the high increase of building land and decrease of cropland suggest the land use transformation in the quick development process of economy; meanwhile, the total area of forestland and grassland changes little, so the ecological environment does not have apparent deterioration in the 1st decade of the new century.

Learning Trajectory for Transforming Teachers' Knowledge for Teaching Mathematics and Science with Digital Image and Video Technologies in an Online Learning Experience

Science.gov (United States)

Niess, Margaret L.; Gillow-Wiles, Henry

2014-01-01

This qualitative cross-case study explores the influence of a designed learning trajectory on transforming teachers' technological pedagogical content knowledge (TPACK) for teaching with digital image and video technologies. The TPACK Learning Trajectory embeds tasks with specific instructional strategies within a social metacognitive…

UTILIZATION OF INFORMATION AND COMMUNICATION TECHNOLOGIES IN MATHEMATICS LEARNING

Directory of Open Access Journals (Sweden)

Farzaneh Saadati

2014-07-01

Full Text Available Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students’ perception regarding the use of Information and Communication Technologies (ICT in mathematics learning as well as investigate their opinion about how ICT can be integrated to improve teaching and learning processes. The subjects were Iranian engineering students from two universities. The finding showed they are fully aware of importance of ICT in teaching and learning mathematics. Whilst, they were feeling comfortable and confident with technology, they do not have more experience of using technology in mathematics classes before. The findings supported the other studies, which indicated the potentials of ICT to facilitate students’ learning, improve teaching, and enhance institutional administration as established in the literature.Keywords: Technology, Mathematics Learning, Facebook, Attitude Toward ICT DOI: http://dx.doi.org/10.22342/jme.5.2.1498.138-147

Progress of cereal transformation technology mediated by Agrobacterium tumefaciens

Science.gov (United States)

Hiei, Yukoh; Ishida, Yuji; Komari, Toshihiko

2014-01-01

Monocotyledonous plants were believed to be not transformable by the soil bacterium Agrobacterium tumefaciens until two decades ago, although convenient protocols for infection of leaf disks and subsequent regeneration of transgenic plants had been well established in a number of dicotyledonous species by then. This belief was reinforced by the fact that monocotyledons are mostly outside the host range of crown gall disease caused by the bacterium and by the failures in trials in monocotyledons to mimic the transformation protocols for dicotyledons. However, a key reason for the failure could have been the lack of active cell divisions at the wound sites in monocotyledons. The complexity and narrow optimal windows of critical factors, such as genotypes of plants, conditions of the plants from which explants are prepared, tissue culture methods and culture media, pre-treatments of explants, strains of A. tumefaciens, inducers of virulence genes, transformation vectors, selection marker genes and selective agents, kept technical hurdles high. Eventually it was demonstrated that rice and maize could be transformed by co-cultivating cells of callus cultures or immature embryos, which are actively dividing or about to divide, with A. tumefaciens. Subsequently, these initial difficulties were resolved one by one by many research groups, and the major cereals are now transformed quite efficiently. As many as 15 independent transgenic events may be regenerated from a single piece of immature embryo of rice. Maize transformation protocols are well established, and almost all transgenic events deregulated for commercialization after 2003 were generated by Agrobacterium-mediated transformation. Wheat, barley, and sorghum are also among those plants that can be efficiently transformed by A. tumefaciens. PMID:25426132

Progress of cereal transformation technology mediated by Agrobacterium tumefaciens.

Science.gov (United States)

Hiei, Yukoh; Ishida, Yuji; Komari, Toshihiko

2014-01-01

Monocotyledonous plants were believed to be not transformable by the soil bacterium Agrobacterium tumefaciens until two decades ago, although convenient protocols for infection of leaf disks and subsequent regeneration of transgenic plants had been well established in a number of dicotyledonous species by then. This belief was reinforced by the fact that monocotyledons are mostly outside the host range of crown gall disease caused by the bacterium and by the failures in trials in monocotyledons to mimic the transformation protocols for dicotyledons. However, a key reason for the failure could have been the lack of active cell divisions at the wound sites in monocotyledons. The complexity and narrow optimal windows of critical factors, such as genotypes of plants, conditions of the plants from which explants are prepared, tissue culture methods and culture media, pre-treatments of explants, strains of A. tumefaciens, inducers of virulence genes, transformation vectors, selection marker genes and selective agents, kept technical hurdles high. Eventually it was demonstrated that rice and maize could be transformed by co-cultivating cells of callus cultures or immature embryos, which are actively dividing or about to divide, with A. tumefaciens. Subsequently, these initial difficulties were resolved one by one by many research groups, and the major cereals are now transformed quite efficiently. As many as 15 independent transgenic events may be regenerated from a single piece of immature embryo of rice. Maize transformation protocols are well established, and almost all transgenic events deregulated for commercialization after 2003 were generated by Agrobacterium-mediated transformation. Wheat, barley, and sorghum are also among those plants that can be efficiently transformed by A. tumefaciens.

Antimicrobial Peptide-Driven Colloidal Transformations in Liquid-Crystalline Nanocarriers

DEFF Research Database (Denmark)

Gontsarik, Mark; Buhmann, Matthias T; Yaghmur, Anan

2016-01-01

Designing efficient colloidal systems for the delivery of membrane active antimicrobial peptides requires in-depth understanding of their structural and morphological characteristics. Using dispersions of inverted type bicontinuous cubic phase (cubosomes), we examine the effect of integrating...... structure, inducing colloidal transformations to sponge and lamellar phases and micelles in a concentration-dependent manner. These investigations, together with in vitro evaluation studies using a clinically relevant bacterial strain, established the composition-nanostructure-activity relationship that can...

Transformation of technical infrastructure

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev

, the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop......The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure...

DIGITAL TRANSFORMATION OF UNIVERSITY EDUCATION IN UKRAINE: TRAJECTORIES OF DEVELOPMENT IN THE CONDITIONS OF NEW TECHNOLOGICAL AND ECONOMIC ORDER

Directory of Open Access Journals (Sweden)

Oleg Ye. Kaminskyi

2018-04-01

Full Text Available The article substantiates the role of the digital transformation of higher education in Ukraine in the era of the fourth industrial revolution. There was proven the need to develop the strategy of the university education digital transformation, as well as the formation of new information and communication competencies. According to the authors, the strategy of digital transformation of the university education system has to include the modernization of corporate IT architecture management, which should be implemented as a cloud-based platform. The authors analysed the main possible directions of the educational services transformation and the accompanying business processes. The use of blockchain technology for the educational content management module construction is proposed. The integration of the educational content management modules of different Ukrainian universities should become the basis for creating a global cloud-based platform for higher education.

Envisioning the future of collaborative model-driven software engineering

NARCIS (Netherlands)

Di Ruscio, Davide; Franzago, Mirco; Malavolta, Ivano; Muccini, Henry

2017-01-01

The adoption of Model-driven Software Engineering (MDSE) to develop complex software systems in application domains like automotive and aerospace is being supported by the maturation of model-driven platforms and tools. However, empirical studies show that a wider adoption of MDSE technologies is

Phase transformation and diffusion

CERN Document Server

Kale, G B; Dey, G K

2008-01-01

Given that the basic purpose of all research in materials science and technology is to tailor the properties of materials to suit specific applications, phase transformations are the natural key to the fine-tuning of the structural, mechanical and corrosion properties. A basic understanding of the kinetics and mechanisms of phase transformation is therefore of vital importance. Apart from a few cases involving crystallographic martensitic transformations, all phase transformations are mediated by diffusion. Thus, proper control and understanding of the process of diffusion during nucleation, g

The Drivers of Success in Business Model Transformation

Directory of Open Access Journals (Sweden)

Nenad Savič

2016-01-01

Full Text Available Existing empirical literature on business models is still inconclusive about the key drivers of successful business model transformation. The paper explores this issue by using a single longitudinal case study design in combination with grounded theory approach on a medium-sized, high-tech and globally oriented company. Based on on-site visits, interviews and secondary documentation data analysis, the study identifies six generic drivers of successful business model transformation: transformational leadership, discovery driven decision-making, industry improvement – customer specific orientation, content-oriented communication, self-initiative collaborators, and phased separation strategy. The new drivers supplement our existing knowledge on how successful transformation takes place and add to existing drivers, while extensive discussion of their implications may help the managers to execute business transformations more effectively.

P01.29 Mutant (R132H) IDH1-driven cellular transformation makes cells dependent on continued wild type IDH1 expression in a model of in vitro gliomagenesis

Science.gov (United States)

Johannessen, T.; Mukherjee, J.; Wood, M.; Viswanath, P.; Ohba, S.; Ronen, S.; Berkvig, R.; Pieper, R.

2017-01-01

Abstract Introduction: Missense R132H mutations in the active site of isocitrate dehydrogenase 1 (IDH1) biologically and diagnostically distinguish low-grade gliomas and secondary glioblastomas from primary glioblastomas. IDH1 mutations lead to the formation of the oncometabolite 2-hydroxyglutarate (2-HG) from the reduction of α-ketoglutarate (α-KG), which in turn facilitates tumorigenesis by modifying DNA and histone methylation as well blocking differentiation processes. We recently showed (Mol Cancer Res 14: 976–983, 2016) that although mutant IDH1 expression in hTERT-immortalized, p53/pRb-deficient astrocytes can drive cellular transformation and gliomagenesis, selective pharmacologic inhibition and elimination of 2-HG by the mutant IDH1 inhibitor AGI-5198 has little effect on the growth or clonagenicity of these transformed cells. To address the possible role of WT IDH1 in the growth of mutant IDH-driven tumor cells, we used a slightly different gliomagenesis model in which the transformation of TERT-deficient, p53/pRb-deficient astrocytes (pre-crisis cells) occurs only after prolonged expression of mutant IDH and passage through cellular crisis (post-crisis cells, Cancer Res 76:6680–6689, 2016). METHODS AND MATERIALS: Using this system we introduced AGI-5198, or siRNA targeting both WT and mutant forms of IDH1 into p53/pRb-deficient, mutant IDH1-expressing human astrocytes prior to or following their transformation, and compared the effects on cell growth and clonagenicity. Results: AGI-5198 exposure decreased levels of 2HG by greater than 90%, and as previously reported had no effect on the growth of either the pre-or post-crisis cell populations. A one-day exposure to a pan IDH1 siRNA resulted in a similar, prolonged (greater than 6 day), 80% inhibition of both WT and mutant IDH1 protein levels and 2HG in both cell groups. While the growth of the mutant IDH-expressing, non-transformed cells was similar to that of scramble siRNA controls, the growth

Fenton-like initiation of a toluene transformation mechanism

Science.gov (United States)

In Fenton-driven oxidation treatment systems, reaction intermediates derived from parent compounds can play a significant role in the overall treatment process. Fenton-like reactions in the presence of toluene or benzene, involved a transformation mechanism that was highly effici...

Low-leakage, high-current power crowbar transformer

International Nuclear Information System (INIS)

Buck, R.T.; Galbraith, J.D.; Nunnally, W.C.

1979-01-01

The design, fabrication, and testing of two sizes of power crowbar transformers for the ZT-40 Toroidal Z-Pinch experiment at the Los Alamos Scientific Laboratory are described. Low-leakage transformers in series with the poloidal and the toroidal field coils are used to sustain magnetic field currents initially produced by 50-kV capacitor banks. The transformer primaries are driven by cost-effective, ignitron-switched, 10-kV high-density capacitor banks. The transformer secondaries, in series with the field coils, provide from 1,000 to 1,500 V to cancel the resistive voltage drop in the coil circuits. Prototype transformers, with a total leakage inductance measured in the secondary of 5 nH, have been tested with peak secondary currents in excess of 600 kA resulting from a 10-kV primary charge voltage. The test procedures and results and the mechanical construction details are presented

Proceedings of the first topical meeting on Asian network for accelerator-driven systems and nuclear transmutation technology

International Nuclear Information System (INIS)

Sasa, Toshinobu

2016-03-01

The first topical meeting on Asian Network for Accelerator-driven System (ADS) and Nuclear Transmutation Technology (NTT) was held on 26-27 October 2015 at the J-PARC Center, Japan Atomic Energy Agency, Japan. The topical meeting was an optional one in-between the regular meeting, which is held in every two years. Instead of the regular meetings, which cover all research fields for ADS and NTT, such as accelerator, spallation target, subcritical reactor, fuel, and material, the topical meeting is focused on a specific topic to make technical discussions more deeply. In this meeting, the technology for lead-bismuth eutectic alloy was selected, as it was one of the hot issues in the world, and the topic was deeply discussed by specialists in Asian countries. This report summarizes all presentation materials discussed in the meeting. (author)

Transforming social contracts

DEFF Research Database (Denmark)

Mohr, Sebastian; Koch, Lene

2016-01-01

The introduction of IVF in Denmark was accompanied by social transformations: contestations of medical authority, negotiations of who might access reproductive biomedicine and changes in individual and social identity due to reproductive technologies. Looking at the making of Danish IVF......, this article sketches its social and cultural history by revisiting the legal, medical, technological and social developments that characterized the introduction of IVF in Denmark as well as by contextualizing the social research on the uses and impacts of IVF carried out in the 1980s and 1990s within...... these developments. The making of Danish IVF is presented as a transformative event in so far as it changed Denmark from being a society concerned about the social consequences of reproductive technologies to a moral collective characterized by a joined sense of responsibility for Denmark's procreative future....

Technological acceleration and organizational transformations in the upstream oil and gas industry; Acceleration technologique et transformations organisationnelles dans l'industrie d'exploration-production d'hydrocarbures

Energy Technology Data Exchange (ETDEWEB)

Isabelle, M

2000-12-15

The upstream oil and gas industry experienced a dramatic technological acceleration in the early 1970's. The relationships between the agents in this industry have themselves undergone deep changes since that date. This thesis shows that a tight link exists between the technological acceleration and the organizational transformations in the upstream oil and gas industry. In a first part, it focuses on the economic theory's developments concerning industrial organization. In a second part, it applies these developments to three types of relations: those between the owner-states of hydrocarbon resources and the international petroleum companies; those between the international petroleum companies and their subcontractors; and finally those between the international petroleum companies themselves. (author)

Development of nuclear transmutation technology - A study on accelerator-driven transmutation of long-lived radionuclide

Energy Technology Data Exchange (ETDEWEB)

Chung, Chang Hyun; Chung, Kie Hyung; Hong, Sang Hee; Hwang, Il Soon; Park, Byung Gi; Yang, Hyung Lyeol; Kim, Duk Kyu; Huh, Chang Wook [Seoul National University, Seoul (Korea, Republic of)

1996-07-01

The objective of this study is to help establish the long-range nuclear waste disposal strategy through the investigations and comparisons of various= concepts of the accelerator-driven nuclear waste transmutation reactors, which have been suggested to replace the geological waste disposal due to the technical uncertainties in the long-time scale. Nuclear data, categorized in high -and low-energy neutron cross-sections, were investigated and the structures, principles, and recent progresses of proton linac were reviews, Also the accelerator power for transmutation and the economics were referred, The comparison of the transmutation concepts concentrated on two: Japanese OMEGA program of alloy fuelled system, Minor actinide molten salt system, and Eutectic alloy system and American ATW program of aqueous system and molten salt system. From the comparative study, a state-of-art of the technology has been identified as a concept employing proton-accelerate of 800 {approx} 1600 MeV with 100 mA capacity combined with liquid lead target, molten salt blanket and on-line chemical separation using centrifuge and electrowinning technology. 34 refs., 25 tabs., 64 figs. (author)

Computers, visualization, and history how new technology will transform our understanding of the past

CERN Document Server

Staley, David J

2015-01-01

This visionary and thoroughly accessible book examines how digital environments and virtual reality have altered the ways historians think and communicate ideas and how the new language of visualization transforms our understanding of the past. Drawing on familiar graphic models--maps, flow charts, museum displays, films--the author shows how images can often convey ideas and information more efficiently and accurately than words. With emerging digital technology, these images will become more sophisticated, manipulable, and multidimensional, and provide historians with new tools and environme

The Designing of Magnetic-Driven Micromirror for Portable FTIRs

Directory of Open Access Journals (Sweden)

Shaoxi Wang

2018-01-01

Full Text Available Fourier transform infrared spectroscopy is a widely used instrument to analyze and test different materials including organic and inorganic. Most of current commercial Fourier transform infrared spectrometers are limited in miniaturization and scanning velocity by their macroscopic components. MEMS FTIR spectroscopy is one of the important applications of translational actuator-driven systems by using MEMS technology. The critical component in MEMS FTIRs is the large displacement translating micromirror and its actuator. The paper presents a large displacement and high-surface quality micromirror. The micromirror consists of a micromagnetic actuator and a micromirror plate. The mirror plate and the actuator are fabricated separately and bonded together afterwards, and its size is 3.6 × 3.6 mm2 high-surface quality square mirror plate and a 1cm2 moving part. The microactuator’s moving part is fabricated using MetalMUMPS, and its fixed part includes a ring permanent magnet and a solenoid to realize a large displacement. The mirror plate is fabricated using polished silicon coated with metal layer with high-surface prototypes that are fabricated and experimentally tested. A maximum stroke of 400 μm has been achieved in pull-in whereas only 140 μm stroke have been measured for a 4 to 5-volt DC-controlled displacement, and the resonance frequency is 10 Hz.

Transforming spaces into lively public open places

NARCIS (Netherlands)

Cilliers, E.J.; Timmermans, W.

2016-01-01

Urban public open spaces are an important part of the urban environment, creating the framework for public life. The transformation of open space into successful public places is crucial in this regard. In the context of target-driven performance it is essential to identify the value of

Technology and Components of Accelerator-driven Systems. Second International Workshop Proceedings, Nantes, France, 21-23 May 2013

International Nuclear Information System (INIS)

2015-01-01

The accelerator-driven system (ADS) is a potential transmutation system option as part of partitioning and transmutation strategies for radioactive waste in advanced nuclear fuel cycles. Following the success of the workshop series on the utilisation and reliability of the High Power Proton Accelerators (HPPA), the scope of this new workshop series on Technology and Components of Accelerator-driven Systems has been extended to cover subcritical systems as well as the use of neutron sources. The workshop organised by the OECD Nuclear Energy Agency provided experts with a forum to present and discuss state-of-the-art developments in the field of ADS and neutron sources. A total of 40 papers were presented during the oral and poster sessions. Four technical sessions were organised addressing ADS experiments and test facilities, accelerators, simulation, safety, data, neutron sources that were opportunity to present the status of projects like the MYRRHA facility, the MEGAPIE target, FREYA and GUINEVERE experiments, the KIPT neutron source, and the FAIR linac. These proceedings include all the papers presented at the workshop

Miniature, Low-Power, Waveguide Based Infrared Fourier Transform Spectrometer for Spacecraft Remote Sensing

Science.gov (United States)

Hewagama, TIlak; Aslam, Shahid; Talabac, Stephen; Allen, John E., Jr.; Annen, John N.; Jennings, Donald E.

2011-01-01

Fourier transform spectrometers have a venerable heritage as flight instruments. However, obtaining an accurate spectrum exacts a penalty in instrument mass and power requirements. Recent advances in a broad class of non-scanning Fourier transform spectrometer (FTS) devices, generally called spatial heterodyne spectrometers, offer distinct advantages as flight optimized systems. We are developing a miniaturized system that employs photonics lightwave circuit principles and functions as an FTS operating in the 7-14 micrometer spectral region. The inteferogram is constructed from an ensemble of Mach-Zehnder interferometers with path length differences calibrated to mimic scan mirror sample positions of a classic Michelson type FTS. One potential long-term application of this technology in low cost planetary missions is the concept of a self-contained sensor system. We are developing a systems architecture concept for wide area in situ and remote monitoring of characteristic properties that are of scientific interest. The system will be based on wavelength- and resolution-independent spectroscopic sensors for studying atmospheric and surface chemistry, physics, and mineralogy. The self-contained sensor network is based on our concept of an Addressable Photonics Cube (APC) which has real-time flexibility and broad science applications. It is envisaged that a spatially distributed autonomous sensor web concept that integrates multiple APCs will be reactive and dynamically driven. The network is designed to respond in an event- or model-driven manner or reconfigured as needed.

Investigation toward laser driven IFE power plant

International Nuclear Information System (INIS)

Nakai, S.; Kozaki, Y.; Izawa, Y.

2001-01-01

Inertial fusion energy (IFE) is becoming feasible due to the increasing understanding of implosion physics. Reactor technology issues have begun to be developed. Based on the conceptual design of Laser Driven IFE Power Plant, the technical and physical issues have been examined. R and D on key issues that affect the feasibility of power plant have been proceeded taking into account the collaboration in the field of laser driver, fuel pellet, reaction chamber and system design. It is concluded that the technical feasibility of IFE power plant seems to be reasonably high. Coordination and collaboration scheme of reactor technology experts in Japan on Laser Driven IFE Power Plant is being proceeded. (author)

Neutron data for accelerator-driven transmutation technologies. Annual Report 2003/2004

International Nuclear Information System (INIS)

Blomgren, J.; Hildebrand, A.; Nilsson, L.; Mermod, P.; Olsson, N.; Pomp, S.; Oesterlund, M.

2004-08-01

The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Dept. of Neutron Research, Uppsala univ. The activities of the group are directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: Analysis and documentation has been finalized of previously performed measurements of elastic neutron scattering from hydrogen at 96 MeV. The results corroborate the normalization of previously obtained data at TSL, which have been under debate. This is of importance since this reaction serves as reference for many other measurements. Compelling evidence of the existence of three-body forces in nuclei has been obtained. Within the project, one PhD exam and one licentiate exam has been awarded. One PhD exam and one licentiate exam has been awarded for work closely related to the project. A new neutron beam facility with significantly improved performance has been built and commissioned at TSL

Neutron data for accelerator-driven transmutation technologies. Annual Report 2003/2004

Energy Technology Data Exchange (ETDEWEB)

Blomgren, J.; Hildebrand, A.; Nilsson, L.; Mermod, P.; Olsson, N.; Pomp, S.; Oesterlund, M. [Uppsala Univ. (Sweden). Dept. for Neutron Research

2004-08-01

The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Dept. of Neutron Research, Uppsala univ. The activities of the group are directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: Analysis and documentation has been finalized of previously performed measurements of elastic neutron scattering from hydrogen at 96 MeV. The results corroborate the normalization of previously obtained data at TSL, which have been under debate. This is of importance since this reaction serves as reference for many other measurements. Compelling evidence of the existence of three-body forces in nuclei has been obtained. Within the project, one PhD exam and one licentiate exam has been awarded. One PhD exam and one licentiate exam has been awarded for work closely related to the project. A new neutron beam facility with significantly improved performance has been built and commissioned at TSL.

A Business Ecosystem Driven Market Analysis

DEFF Research Database (Denmark)

Ma, Zheng; Billanes, Joy Dalmacio; Jørgensen, Bo Nørregaard

2017-01-01

Due to the huge globally emerging market of the bright green buildings, this paper aims to develop a business-ecosystem driven market analysis approach for the investigation of the bright green building market. This paper develops a five-steps business-ecosystem driven market analysis (definition...... of the business domain, stakeholder listing, integration of the value chain, relationship mapping, and ego innovation ecosystem mapping.). This paper finds the global-local matters influence the market structure, which the technologies for building energy technology are developed and employed globally......, and the market demand is comparatively localized. The market players can be both local and international stakeholders who involve and collaborate for the building projects. This paper also finds that the building extensibility should be considered into the building design due to the gap between current market...

Semantic Web and Model-Driven Engineering

CERN Document Server

Parreiras, Fernando S

2012-01-01

The next enterprise computing era will rely on the synergy between both technologies: semantic web and model-driven software development (MDSD). The semantic web organizes system knowledge in conceptual domains according to its meaning. It addresses various enterprise computing needs by identifying, abstracting and rationalizing commonalities, and checking for inconsistencies across system specifications. On the other side, model-driven software development is closing the gap among business requirements, designs and executables by using domain-specific languages with custom-built syntax and se

Metadata-Driven SOA-Based Application for Facilitation of Real-Time Data Warehousing

Science.gov (United States)

Pintar, Damir; Vranić, Mihaela; Skočir, Zoran

Service-oriented architecture (SOA) has already been widely recognized as an effective paradigm for achieving integration of diverse information systems. SOA-based applications can cross boundaries of platforms, operation systems and proprietary data standards, commonly through the usage of Web Services technology. On the other side, metadata is also commonly referred to as a potential integration tool given the fact that standardized metadata objects can provide useful information about specifics of unknown information systems with which one has interest in communicating with, using an approach commonly called "model-based integration". This paper presents the result of research regarding possible synergy between those two integration facilitators. This is accomplished with a vertical example of a metadata-driven SOA-based business process that provides ETL (Extraction, Transformation and Loading) and metadata services to a data warehousing system in need of a real-time ETL support.

Rapid expression of transgenes driven by seed-specific constructs in leaf tissue: DHA production

Directory of Open Access Journals (Sweden)

Zhou Xue-Rong

2010-03-01

Full Text Available Abstract Background Metabolic engineering of seed biosynthetic pathways to diversify and improve crop product quality is a highly active research area. The validation of genes driven by seed-specific promoters is time-consuming since the transformed plants must be grown to maturity before the gene function can be analysed. Results In this study we demonstrate that genes driven by seed-specific promoters contained within complex constructs can be transiently-expressed in the Nicotiana benthamiana leaf-assay system by co-infiltrating the Arabidopsis thaliana LEAFY COTYLEDON2 (LEC2 gene. A real-world case study is described in which we first assembled an efficient transgenic DHA synthesis pathway using a traditional N. benthamiana Cauliflower Mosaic Virus (CaMV 35S-driven leaf assay before using the LEC2-extended assay to rapidly validate a complex seed-specific construct containing the same genes before stable transformation in Arabidopsis. Conclusions The LEC2-extended N. benthamiana assay allows the transient activation of seed-specific promoters in leaf tissue. In this study we have used the assay as a rapid preliminary screen of a complex seed-specific transgenic construct prior to stable transformation, a feature that will become increasingly useful as genetic engineering moves from the manipulation of single genes to the engineering of complex pathways. We propose that the assay will prove useful for other applications wherein rapid expression of transgenes driven by seed-specific constructs in leaf tissue are sought.

Proliferation Potential of Accelerator-Driven Systems: Feasibility Calculations

International Nuclear Information System (INIS)

Riendeau, C.D.; Moses, D.L.; Olson, A.P.

1998-01-01

Accelerator-driven systems for fissile materials production have been proposed and studied since the early 1950s. Recent advances in beam power levels for small accelerators have raised the possibility that such use could be feasible for a potential proliferator. The objective of this study is to review the state of technology development for accelerator-driven spallation neutron sources and subcritical reactors. Energy and power requirements were calculated for a proton accelerator-driven neutron spallation source and subcritical reactors to produce a significant amount of fissile material--plutonium

Radiation effects in materials for accelerator-driven neutron technologies. Revision

International Nuclear Information System (INIS)

Wechsler, M.S.; Lin, C.; Sommer, W.F.

1997-01-01

Accelerator-driven neutron technologies use spallation neutron sources (SNS's) in which high-energy protons bombard a heavy-element target and spallation neutrons are produced. The materials exposed to the most damaging radiation environments in an SNS are those in the path of the incident proton beam. This includes target and window materials. These materials will experience damage from the incident protons and the spallation neutrons. In addition, some materials will be damaged by the spallation neutrons alone. The principal materials of interest for SNS's are discussed elsewhere. The target should consist of one or more heavy elements, so as to increase the number of neutrons produced per incident proton. A liquid metal target (e.g., Pb, Bi, Pb-Bi, Pb-Mg, and Hg) has the advantage of eliminating the effects of radiation damage on the target material itself, but concerns over corrosion problems and the influence of transmutants remain. The major solid targets in operating SNS's and under consideration for the 1-5 MW SNS's are W, U, and Pb. Tungsten is the target material at LANSCE, and is the projected target material for an upgraded LANSCE target that is presently being designed. It is also the projected target material for the tritium producing SNS under design at LANL. In this paper, the authors present the results of spallation radiation damage calculations (displacement and He production) for tungsten

Transforming care in nursing: a concept analysis.

Science.gov (United States)

Vázquez-Calatayud, Mónica; Oroviogoicoechea, Cristina; Saracibar, Maribel; Pumar-Méndez, María J

2017-04-01

Although the concept of 'Transforming care' is promising for improving health care, there is no consensus in the field as to its definition. The aim of this concept analysis is to develop a deeper understanding of the term 'Transforming care' within the nursing discipline, in order to facilitate its comprehension, implementation, and evaluation. We performed a comprehensive literature review on electronic databases such as Medline (PubMed), Cinahl (Ebsco), Cochrane Library, PsycINFO (Ovid), Web of Science, Wiley-Blackwell, ScienceDirect, and SpringerLink and used Walker and Avant's approach to analyse the concept. From the 20 studies selected for this analysis, 3 main attributes of 'Transforming care' were identified: patient-centredness, evidence-based change, and transformational leadership driven. We suggest an operational definition to facilitate the implementation of the concept in practice. Furthermore, we propose that implementation is guided by the following key ideas: (1) fostering a culture of continuous improvement; (2) encouraging bottom-up initiatives; (3) promoting patient-centred care; and (4) using transformational leadership. Lastly, the evaluation of 'Transforming care' initiatives should assess care processes and professionals' and patients' outcomes.

Photocatalytic Pre-Oxidation of Arsenic (III) in Groundwater by a Visible-Light-Driven System with Magnetic Separating Characteristic

Science.gov (United States)

Cui, Y.; Liu, Y.; Peng, L.; Qin, Y.

2017-12-01

Arsenic was a typical toxic metalloid element and its contamination in groundwater was widely recognized as a global health problem, especially in north China, where people depended on groundwater as water resource. Arsenic was existed as As(III) in underground water, and has low affinity to the surface of various minerals and more toxic and more difficultly to be removed compared with As(V), so a pre-oxidation technology by transforming As (III) to As (V) is highly desirable. Electrochemical and oxidizing agents were traditional technology, which usually causes secondary pollution. A novel methodology is presented here, using prepared magnetic visible-light-driven nanomaterials as recyclable media to investigate As(III) pre-oxidation processing. Ag@AgCl core-shell nanowires were first synthesized by oxidation of Ag nanowires with moderate FeCl3, and exhibited excellent photocatalytic activity to As(III) with visible-light. The ratio of chloridization was proved to act as key effect on photocatalytic oxidation efficiency. Testing with simulated groundwater condition proved that pH, ionic strength and concentration of humic acid have obvious effects on Ag@AgCl photocatalytic ability. h+ and ·O2- were confirmed to be the main active species during the visible-light driven photocatalytic oxidation process for As(III) by trapping experiments with radical scavengers. Then Fe0 was introduced to prepare Fe-Ag nanowire and chloridized into Fe-Ag@AgCl to provide magnetic characteristic. The magnetic recycling and re-chloride experiments validated this visible-light-driven material has excellent stable and high reused ability as photocatalyst under visible light irradiation.

Transformative environmental governance

Science.gov (United States)

Chaffin, Brian C.; Garmestani, Ahjond S.; Gunderson, Lance H.; Harm Benson, Melinda; Angeler, David G.; Arnold, Craig Anthony (Tony); Cosens, Barbara; Kundis Craig, Robin; Ruhl, J.B.; Allen, Craig R.

2016-01-01

Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to alternative, more desirable, or more functional regimes by altering the structures and processes that define the system. Transformative governance is rooted in ecological theories to explain cross-scale dynamics in complex systems, as well as social theories of change, innovation, and technological transformation. Similar to adaptive governance, transformative governance involves a broad set of governance components, but requires additional capacity to foster new social-ecological regimes including increased risk tolerance, significant systemic investment, and restructured economies and power relations. Transformative governance has the potential to actively respond to regime shifts triggered by climate change, and thus future research should focus on identifying system drivers and leading indicators associated with social-ecological thresholds.

Transforming Lessons with Technology

Science.gov (United States)

Currie, Brad

2016-01-01

Using a fictitious learning environment, the author demonstrates a variety of technological tools that teachers can infuse into their classrooms. Come away with some innovative, practical methods to help students show what they know about the topic at hand.

9th International Bielefeld Conference 2009: Upgrading the eLibrary: Enhanced Information Services Driven by Technology and Economics

Directory of Open Access Journals (Sweden)

Almuth Gastinger

2009-10-01

Full Text Available Thisarticle reports on the 9th International Bielefeld Conference ‘Upgrading the eLibrary: Enhanced Information Services Driven by Technology and Economics’, 3-5 February 2009, in Bielefeld, Germany. The conference focused on future challenges for libraries regarding the development of information services and infrastructures that meet the changing needs of scholarly communication, collaboration (e-science and publication (open access as well as new requirements regarding teaching and learning (virtual learning spaces. In addition attention was paid to economic conditions and strategic positioning of libraries as a general framework for information services.

Transforming the Classroom With Tablet Technology.

Science.gov (United States)

Sargent, Lana; Miles, Elizabeth

Identifying the most effective models for integrating new technology into the classroom and understanding its effects on educational outcomes are essential for nurse educators. This article describes an educational intervention with tablet technology (iPads) using an innovative case-based learning model in a nursing program. Students reported positive learning outcomes when using the tablet technology for learning course content.

A systematic review on incentive-driven mobile health technology: As used in diabetes management.

Science.gov (United States)

de Ridder, Michael; Kim, Jinman; Jing, Yan; Khadra, Mohamed; Nanan, Ralph

2017-01-01

Introduction Mobile health (mHealth) technologies have been shown to improve self-management of chronic diseases, such as diabetes. However, mHealth tools, e.g. apps, often have low rates of retention, eroding their potential benefits. Using incentives is a common mechanism for engaging, empowering and retaining patients that is applied by mHealth tools. We conducted a systematic review aiming to categorize the different types of incentive mechanisms employed in mHealth tools for diabetes management, which we defined as incentive-driven technologies (IDTs). As an auxiliary aim, we also analyzed barriers to adoption of IDTs. Methods Literature published in English between January 2008-August 2014 was identified through searching leading publishers and indexing databases: IEEE, Springer, Science Direct, NCBI, ACM, Wiley and Google Scholar. Results A total of 42 articles were selected. Of these, 34 presented mHealth tools with IDT mechanisms; Education was the most common mechanism ( n = 21), followed by Reminder ( n = 11), Feedback ( n = 10), Social ( n = 8), Alert ( n = 5), Gamification ( n = 3), and Financial ( n = 2). Many of these contained more than one IDT ( n = 19). The remaining eight articles, from which we defined barriers for adoption, were review papers and a qualitative study of focus groups and interviews. Discussion While mHealth technologies have advanced over the last five years, the core IDT mechanisms have remained consistent. Instead, IDT mechanisms have evolved with the advances in technology, such as moving from manual to automatic content delivery and personalization of content. Conclusion We defined the concept of IDT to be core features designed to act as motivating mechanisms for retaining and empowering users. We then identified seven core IDT mechanisms that are used by mHealth tools for diabetes management and classified 34 articles into these categories.

Incorporating new technologies into toxicity testing and risk assessment: moving from 21st century vision to a data-driven framework.

Science.gov (United States)

Thomas, Russell S; Philbert, Martin A; Auerbach, Scott S; Wetmore, Barbara A; Devito, Michael J; Cote, Ila; Rowlands, J Craig; Whelan, Maurice P; Hays, Sean M; Andersen, Melvin E; Meek, M E Bette; Reiter, Lawrence W; Lambert, Jason C; Clewell, Harvey J; Stephens, Martin L; Zhao, Q Jay; Wesselkamper, Scott C; Flowers, Lynn; Carney, Edward W; Pastoor, Timothy P; Petersen, Dan D; Yauk, Carole L; Nong, Andy

2013-11-01

Based on existing data and previous work, a series of studies is proposed as a basis toward a pragmatic early step in transforming toxicity testing. These studies were assembled into a data-driven framework that invokes successive tiers of testing with margin of exposure (MOE) as the primary metric. The first tier of the framework integrates data from high-throughput in vitro assays, in vitro-to-in vivo extrapolation (IVIVE) pharmacokinetic modeling, and exposure modeling. The in vitro assays are used to separate chemicals based on their relative selectivity in interacting with biological targets and identify the concentration at which these interactions occur. The IVIVE modeling converts in vitro concentrations into external dose for calculation of the point of departure (POD) and comparisons to human exposure estimates to yield a MOE. The second tier involves short-term in vivo studies, expanded pharmacokinetic evaluations, and refined human exposure estimates. The results from the second tier studies provide more accurate estimates of the POD and the MOE. The third tier contains the traditional animal studies currently used to assess chemical safety. In each tier, the POD for selective chemicals is based primarily on endpoints associated with a proposed mode of action, whereas the POD for nonselective chemicals is based on potential biological perturbation. Based on the MOE, a significant percentage of chemicals evaluated in the first 2 tiers could be eliminated from further testing. The framework provides a risk-based and animal-sparing approach to evaluate chemical safety, drawing broadly from previous experience but incorporating technological advances to increase efficiency.

Incorporating New Technologies Into Toxicity Testing and Risk Assessment: Moving From 21st Century Vision to a Data-Driven Framework

Science.gov (United States)

Thomas, Russell S.

2013-01-01

Based on existing data and previous work, a series of studies is proposed as a basis toward a pragmatic early step in transforming toxicity testing. These studies were assembled into a data-driven framework that invokes successive tiers of testing with margin of exposure (MOE) as the primary metric. The first tier of the framework integrates data from high-throughput in vitro assays, in vitro-to-in vivo extrapolation (IVIVE) pharmacokinetic modeling, and exposure modeling. The in vitro assays are used to separate chemicals based on their relative selectivity in interacting with biological targets and identify the concentration at which these interactions occur. The IVIVE modeling converts in vitro concentrations into external dose for calculation of the point of departure (POD) and comparisons to human exposure estimates to yield a MOE. The second tier involves short-term in vivo studies, expanded pharmacokinetic evaluations, and refined human exposure estimates. The results from the second tier studies provide more accurate estimates of the POD and the MOE. The third tier contains the traditional animal studies currently used to assess chemical safety. In each tier, the POD for selective chemicals is based primarily on endpoints associated with a proposed mode of action, whereas the POD for nonselective chemicals is based on potential biological perturbation. Based on the MOE, a significant percentage of chemicals evaluated in the first 2 tiers could be eliminated from further testing. The framework provides a risk-based and animal-sparing approach to evaluate chemical safety, drawing broadly from previous experience but incorporating technological advances to increase efficiency. PMID:23958734

Event-Driven Technology to Generate Relevant Collections of Near-Realtime Data

Science.gov (United States)

Graves, S. J.; Keiser, K.; Nair, U. S.; Beck, J. M.; Ebersole, S.

2017-12-01

Getting the right data when it is needed continues to be a challenge for researchers and decision makers. Event-Driven Data Delivery (ED3), funded by the NASA Applied Science program, is a technology that allows researchers and decision makers to pre-plan what data, information and processes they need to have collected or executed in response to future events. The Information Technology and Systems Center at the University of Alabama in Huntsville (UAH) has developed the ED3 framework in collaboration with atmospheric scientists at UAH, scientists at the Geological Survey of Alabama, and other federal, state and local stakeholders to meet the data preparedness needs for research, decisions and situational awareness. The ED3 framework supports an API that supports the addition of loosely-coupled, distributed event handlers and data processes. This approach allows the easy addition of new events and data processes so the system can scale to support virtually any type of event or data process. Using ED3's underlying services, applications have been developed that monitor for alerts of registered event types and automatically triggers subscriptions that match new events, providing users with a living "album" of results that can continued to be curated as more information for an event becomes available. This capability can allow users to improve capacity for the collection, creation and use of data and real-time processes (data access, model execution, product generation, sensor tasking, social media filtering, etc), in response to disaster (and other) events by preparing in advance for data and information needs for future events. This presentation will provide an update on the ED3 developments and deployments, and further explain the applicability for utilizing near-realtime data in hazards research, response and situational awareness.

Formal Model-Driven Engineering: Generating Data and Behavioural Components

Directory of Open Access Journals (Sweden)

Chen-Wei Wang

2012-12-01

Full Text Available Model-driven engineering is the automatic production of software artefacts from abstract models of structure and functionality. By targeting a specific class of system, it is possible to automate aspects of the development process, using model transformations and code generators that encode domain knowledge and implementation strategies. Using this approach, questions of correctness for a complex, software system may be answered through analysis of abstract models of lower complexity, under the assumption that the transformations and generators employed are themselves correct. This paper shows how formal techniques can be used to establish the correctness of model transformations used in the generation of software components from precise object models. The source language is based upon existing, formal techniques; the target language is the widely-used SQL notation for database programming. Correctness is established by giving comparable, relational semantics to both languages, and checking that the transformations are semantics-preserving.

Foreign investment, organizational innovation and transformation in food supply chains : evidence from the Ethiopian barley sector

NARCIS (Netherlands)

Tefera, Delelegne Abera

2017-01-01

Driven by rapid urbanization, economic growth, and changes in consumption patterns, food chains in emerging and developing economies are experiencing a fundamental transformation process. This transformation is usually characterized by increased vertical coordination, growth of modern

Five Principles of Industrialized Transformation for Successfully Building an Operational Backbone

DEFF Research Database (Denmark)

Winkler, Till J.; Kettunen, Petteri

2018-01-01

approach that is underpinned by five principles—template-based, business-driven, matrix-organized, tight supplier steering and cascaded planning. The UPM case provides important lessons for transformation leaders seeking to build, expand or develop a value-adding operational backbone.......To move into the digital age, a globally operating company needs to have in place an operational backbone, but many struggle with achieving this and the associated transformation program. Based on the experience of UPM, a Finnish forest industry company, we describe an industrialized transformation...

Thermokarst transformation of permafrost preserved glaciated landscapes.

Science.gov (United States)

Kokelj, S.; Tunnicliffe, J. F.; Fraser, R.; Kokoszka, J.; Lacelle, D.; Lantz, T. C.; Lamoureux, S. F.; Rudy, A.; Shakil, S.; Tank, S. E.; van der Sluijs, J.; Wolfe, S.; Zolkos, S.

2017-12-01

Thermokarst is the fundamental mechanism of landscape change and a primary driver of downstream effects in a warming circumpolar world. Permafrost degradation is inherently non-linear because latent heat effects can inhibit thawing. However, once this thermal transition is crossed thermokarst can accelerate due to the interaction of thermal, physical and ecological feedbacks. In this paper we highlight recent climate and precipitation-driven intensification of thaw slumping that is transforming permafrost preserved glaciated landscapes in northwestern Canada. The continental distribution of slump affected terrain reflects glacial extents and recessional positions of the Laurentide Ice sheet. On this basis and in conjunction with intense thermokarst in cold polar environments, we highlight the critical roles of geological legacy and climate history in dictating the sensitivity of permafrost terrain. These glaciated landscapes, maintained in a quasi-stable state throughout much of the late Holocene are now being transformed into remarkably dynamic environments by climate-driven thermokarst. Individual disturbances displace millions of cubic metres of previously frozen material downslope, converting upland sedimentary stores into major source areas. Precipitation-driven evacuation of sediment by fluidized mass flows perpetuates non-linear enlargement of disturbances. The infilling of valleys with debris deposits tens of metres thick increases stream base-levels and promotes rapid valley-side erosion. These processes destabilize adjacent slopes and proliferate disturbance effects. Physically-based modeling of thaw slump development provides insight into the trajectories of landscape change, and the mapping of fluvial linkages portrays the cascade of effects across watershed scales. Post-glacial or "paraglacial" models of landscape evolution provide a useful framework for understanding the nature and magnitude of climate-driven changes in permafrost preserved glaciated

Low light and low ammonium are key factors for guayule leaf tissue shoot organogenesis and transformation.

Science.gov (United States)

Dong, Niu; Montanez, Belen; Creelman, Robert A; Cornish, Katrina

2006-02-01

A new method has been developed for guayule tissue culture and transformation. Guayule leaf explants have a poor survival rate when placed on normal MS medium and under normal culture room light conditions. Low light and low ammonium treatment greatly improved shoot organogenesis and transformation from leaf tissues. Using this method, a 35S promoter driven BAR gene and an ubiquitin-3 promoter driven GUS gene (with intron) have been successfully introduced into guayule. These transgenic guayule plants were resistant to the herbicide ammonium-glufosinate and were positive to GUS staining. Molecular analysis showed the expected band and signal in all GUS positive transformants. The transformation efficiency with glufosinate selection ranged from 3 to 6%. Transformation with a pBIN19-based plasmid containing a NPTII gene and then selection with kanamycin also works well using this method. The ratio of kanamycin-resistant calli to total starting explants reached 50% in some experiments.

The Hypothesis-Driven Physical Examination.

Science.gov (United States)

Garibaldi, Brian T; Olson, Andrew P J

2018-05-01

The physical examination remains a vital part of the clinical encounter. However, physical examination skills have declined in recent years, in part because of decreased time at the bedside. Many clinicians question the relevance of physical examinations in the age of technology. A hypothesis-driven approach to teaching and practicing the physical examination emphasizes the performance of maneuvers that can alter the likelihood of disease. Likelihood ratios are diagnostic weights that allow clinicians to estimate the post-probability of disease. This hypothesis-driven approach to the physical examination increases its value and efficiency, while preserving its cultural role in the patient-physician relationship. Copyright © 2017 Elsevier Inc. All rights reserved.

Can commonly-used fan-driven air cleaning technologies improve indoor air quality? A literature review

DEFF Research Database (Denmark)

Zhang, Yinping; Mo, Jinhan; Li, Yuguo

2011-01-01

America, and Asia with expertise in air cleaning, aerosol science, medicine, chemistry and ventilation. The effects on health were not examined. Over 26,000 articles were identified in major literature databases; 400 were selected as being relevant based on their titles and abstracts by the first two......Air cleaning techniques have been applied worldwide with the goal of improving indoor air quality. The effectiveness of applying these techniques varies widely, and pollutant removal efficiency is usually determined in controlled laboratory environments which may not be realized in practice. Some...... air cleaners are largely ineffective, and some produce harmful by-products. To summarize what is known regarding the effectiveness of fan-driven air cleaning technologies, a state-of-the-art review of the scientific literature was undertaken by a multidisciplinary panel of experts from Europe, North...

Part I.2: Perspectives on Technological Transformation

DEFF Research Database (Denmark)

Müller, Jens

2003-01-01

The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis.......The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis....

Artificial cognitive memory—changing from density driven to functionality driven

Science.gov (United States)

Shi, L. P.; Yi, K. J.; Ramanathan, K.; Zhao, R.; Ning, N.; Ding, D.; Chong, T. C.

2011-03-01

Increasing density based on bit size reduction is currently a main driving force for the development of data storage technologies. However, it is expected that all of the current available storage technologies might approach their physical limits in around 15 to 20 years due to miniaturization. To further advance the storage technologies, it is required to explore a new development trend that is different from density driven. One possible direction is to derive insights from biological counterparts. Unlike physical memories that have a single function of data storage, human memory is versatile. It contributes to functions of data storage, information processing, and most importantly, cognitive functions such as adaptation, learning, perception, knowledge generation, etc. In this paper, a brief review of current data storage technologies are presented, followed by discussions of future storage technology development trend. We expect that the driving force will evolve from density to functionality, and new memory modules associated with additional functions other than only data storage will appear. As an initial step toward building a future generation memory technology, we propose Artificial Cognitive Memory (ACM), a memory based intelligent system. We also present the characteristics of ACM, new technologies that can be used to develop ACM components such as bioinspired element cells (silicon, memristor, phase change, etc.), and possible methodologies to construct a biologically inspired hierarchical system.

Part I.6: Perspectives on Technological Transformation

DEFF Research Database (Denmark)

Müller, Jens

2003-01-01

The article outlines the technological transfer processes and sums that the national systems of innovation function under highly contrasting institutional and technological settings.......The article outlines the technological transfer processes and sums that the national systems of innovation function under highly contrasting institutional and technological settings....

Wind driven mobile charging of automobile battery- A case study ...

African Journals Online (AJOL)

This paper deals with implementation of mobile wind driven generator technology to produce electricity in charging of two wheeler (12V) automobile battery. The use of PWM methodology with pulse charging method at a constant rate has been adopted for this purpose. The low speed PMSG driven by wind at speed of ...

Mitochondrial clearance by the STK38 kinase supports oncogenic Ras-induced cell transformation

Science.gov (United States)

Bettoun, Audrey; Surdez, Didier; Vallerand, David; Gundogdu, Ramazan; Sharif, Ahmad A.D.; Gomez, Marta; Cascone, Ilaria; Meunier, Brigitte; White, Michael A.; Codogno, Patrice; Parrini, Maria Carla; Camonis, Jacques H.; Hergovich, Alexander

2016-01-01

Oncogenic Ras signalling occurs frequently in many human cancers. However, no effective targeted therapies are currently available to treat patients suffering from Ras-driven tumours. Therefore, it is imperative to identify downstream effectors of Ras signalling that potentially represent promising new therapeutic options. Particularly, considering that autophagy inhibition can impair the survival of Ras-transformed cells in tissue culture and mouse models, an understanding of factors regulating the balance between autophagy and apoptosis in Ras-transformed human cells is needed. Here, we report critical roles of the STK38 protein kinase in oncogenic Ras transformation. STK38 knockdown impaired anoikis resistance, anchorage-independent soft agar growth, and in vivo xenograft growth of Ras-transformed human cells. Mechanistically, STK38 supports Ras-driven transformation through promoting detachment-induced autophagy. Even more importantly, upon cell detachment STK38 is required to sustain the removal of damaged mitochondria by mitophagy, a selective autophagic process, to prevent excessive mitochondrial reactive oxygen species production that can negatively affect cancer cell survival. Significantly, knockdown of PINK1 or Parkin, two positive regulators of mitophagy, also impaired anoikis resistance and anchorage-independent growth of Ras-transformed human cells, while knockdown of USP30, a negative regulator of PINK1/Parkin-mediated mitophagy, restored anchorage-independent growth of STK38-depleted Ras-transformed human cells. Therefore, our findings collectively reveal novel molecular players that determine whether Ras-transformed human cells die or survive upon cell detachment, which potentially could be exploited for the development of novel strategies to target Ras-transformed cells. PMID:27283898

Automated Creation of Datamarts from a Clinical Data Warehouse, Driven by an Active Metadata Repository

Science.gov (United States)

Rogerson, Charles L.; Kohlmiller, Paul H.; Stutman, Harris

1998-01-01

A methodology and toolkit are described which enable the automated metadata-driven creation of datamarts from clinical data warehouses. The software uses schema-to-schema transformation driven by an active metadata repository. Tools for assessing datamart data quality are described, as well as methods for assessing the feasibility of implementing specific datamarts. A methodology for data remediation and the re-engineering of operational data capture is described.

Absolute atomic oxygen and nitrogen densities in radio-frequency driven atmospheric pressure cold plasmas: Synchrotron vacuum ultra-violet high-resolution Fourier-transform absorption measurements

International Nuclear Information System (INIS)

Niemi, K.; O'Connell, D.; Gans, T.; Oliveira, N. de; Joyeux, D.; Nahon, L.; Booth, J. P.

2013-01-01

Reactive atomic species play a key role in emerging cold atmospheric pressure plasma applications, in particular, in plasma medicine. Absolute densities of atomic oxygen and atomic nitrogen were measured in a radio-frequency driven non-equilibrium plasma operated at atmospheric pressure using vacuum ultra-violet (VUV) absorption spectroscopy. The experiment was conducted on the DESIRS synchrotron beamline using a unique VUV Fourier-transform spectrometer. Measurements were carried out in plasmas operated in helium with air-like N 2 /O 2 (4:1) admixtures. A maximum in the O-atom concentration of (9.1 ± 0.7)×10 20 m −3 was found at admixtures of 0.35 vol. %, while the N-atom concentration exhibits a maximum of (5.7 ± 0.4)×10 19 m −3 at 0.1 vol. %

RESEARCH ON COORDINATE TRANSFORMATION METHOD OF GB-SAR IMAGE SUPPORTED BY 3D LASER SCANNING TECHNOLOGY

Directory of Open Access Journals (Sweden)

P. Wang

2018-04-01

Full Text Available In the image plane of GB-SAR, identification of deformation distribution is usually carried out by artificial interpretation. This method requires analysts to have adequate experience of radar imaging and target recognition, otherwise it can easily cause false recognition of deformation target or region. Therefore, it is very meaningful to connect two-dimensional (2D plane coordinate system with the common three-dimensional (3D terrain coordinate system. To improve the global accuracy and reliability of the transformation from 2D coordinates of GB-SAR images to local 3D coordinates, and overcome the limitation of traditional similarity transformation parameter estimation method, 3D laser scanning data is used to assist the transformation of GB-SAR image coordinates. A straight line fitting method for calculating horizontal angle was proposed in this paper. After projection into a consistent imaging plane, we can calculate horizontal rotation angle by using the linear characteristics of the structure in radar image and the 3D coordinate system. Aided by external elevation information by 3D laser scanning technology, we completed the matching of point clouds and pixels on the projection plane according to the geometric projection principle of GB-SAR imaging realizing the transformation calculation of GB-SAR image coordinates to local 3D coordinates. Finally, the effectiveness of the method is verified by the GB-SAR deformation monitoring experiment on the high slope of Geheyan dam.

Research on Coordinate Transformation Method of Gb-Sar Image Supported by 3d Laser Scanning Technology

Science.gov (United States)

Wang, P.; Xing, C.

2018-04-01

In the image plane of GB-SAR, identification of deformation distribution is usually carried out by artificial interpretation. This method requires analysts to have adequate experience of radar imaging and target recognition, otherwise it can easily cause false recognition of deformation target or region. Therefore, it is very meaningful to connect two-dimensional (2D) plane coordinate system with the common three-dimensional (3D) terrain coordinate system. To improve the global accuracy and reliability of the transformation from 2D coordinates of GB-SAR images to local 3D coordinates, and overcome the limitation of traditional similarity transformation parameter estimation method, 3D laser scanning data is used to assist the transformation of GB-SAR image coordinates. A straight line fitting method for calculating horizontal angle was proposed in this paper. After projection into a consistent imaging plane, we can calculate horizontal rotation angle by using the linear characteristics of the structure in radar image and the 3D coordinate system. Aided by external elevation information by 3D laser scanning technology, we completed the matching of point clouds and pixels on the projection plane according to the geometric projection principle of GB-SAR imaging realizing the transformation calculation of GB-SAR image coordinates to local 3D coordinates. Finally, the effectiveness of the method is verified by the GB-SAR deformation monitoring experiment on the high slope of Geheyan dam.

Transforming the Economics Curriculum by Integrating Threshold Concepts

Science.gov (United States)

Karunaratne, Prashan Shayanka Mendis; Breyer, Yvonne A.; Wood, Leigh N.

2016-01-01

Purpose: Economics is catering to a diverse student cohort. This cohort needs to be equipped with transformative concepts that students can integrate beyond university. When a curriculum is content-driven, threshold concepts are a useful tool in guiding curriculum re-design. The paper aims to discuss these issues. Design/Methodology/Approach: The…

Transforming pathophysiology instruction through narrative pedagogy and Socratic questioning.

Science.gov (United States)

Rogge, M M

2001-01-01

Pathophysiology, heavily content driven, has typically been taught through the use of traditional behavioral pedagogy and a reliance on the formal lecture. The author describes the limitations of this approach to teaching pathophysiology and describes the use of narrative pedagogy and Socratic questioning as alternative methods of instruction to augment lecture methods. Specific strategies for transforming traditional classroom teaching by using Socratic questions in a pathophysiology course for nurse practitioners are described. Student and faculty reactions to the initial efforts to transform pathophysiology instruction are also described.

Foundations for Streaming Model Transformations by Complex Event Processing.

Science.gov (United States)

Dávid, István; Ráth, István; Varró, Dániel

2018-01-01

Streaming model transformations represent a novel class of transformations to manipulate models whose elements are continuously produced or modified in high volume and with rapid rate of change. Executing streaming transformations requires efficient techniques to recognize activated transformation rules over a live model and a potentially infinite stream of events. In this paper, we propose foundations of streaming model transformations by innovatively integrating incremental model query, complex event processing (CEP) and reactive (event-driven) transformation techniques. Complex event processing allows to identify relevant patterns and sequences of events over an event stream. Our approach enables event streams to include model change events which are automatically and continuously populated by incremental model queries. Furthermore, a reactive rule engine carries out transformations on identified complex event patterns. We provide an integrated domain-specific language with precise semantics for capturing complex event patterns and streaming transformations together with an execution engine, all of which is now part of the Viatra reactive transformation framework. We demonstrate the feasibility of our approach with two case studies: one in an advanced model engineering workflow; and one in the context of on-the-fly gesture recognition.

Negative pressure driven phase transformation in Sr doped SmCoO₃.

Science.gov (United States)

Arshad Farhan, M; Javed Akhtar, M

2010-02-24

Atomistic computer simulation techniques based on energy minimization procedures are utilized for the structural investigation of perovskite-type SmCoO(3). A reliable potential model is derived which reproduces both cubic as well as orthorhombic phases of SmCoO(3). We observe a negative chemical pressure induced structural phase transformation from distorted perovskite (orthorhombic) to perfect perovskite (cubic) due to the substitution of Sr(2 + ) at the Sm(3 + ) sites. However, external hydrostatic pressure shows isotropic compression and no pressure-induced structural transformation is observed up to 100 GPa. To maintain the electroneutrality of the system, charge compensation is through oxygen vacancies which results in the brownmillerite-type structure. A defect model is proposed, which is consistent with experimental results. The solution energies for divalent and trivalent cations are also calculated. These results show that the cations having ionic radii less than 0.75 Å will occupy the Co sites and those with ionic radii larger than 0.75 Å will substitute at the Sm sites.

Quality management using model-driven engineering: an overview

OpenAIRE

Ruiz-Rube, Iván; Escalona, María José

2014-01-01

Quality Management (QM) is one of the critical points of any software development process. In recent years, several proposals have emerged on this issue, mainly with regard to maturity models, quality standards and best practices collections. Besides, Model Driven Engineering (MDE) aims to build software systems through the construction and transformation of models. However, MDE might be used for other different tasks. In this poster, we summarize the main contributions abou...

Business Value of Information Technology Service Quality Based on Probabilistic Business-Driven Model

Directory of Open Access Journals (Sweden)

Jaka Sembiring

2015-08-01

Full Text Available The business value of information technology (IT services is often difficult to assess, especially from the point of view of a non-IT manager. This condition could severely impact organizational IT strategic decisions. Various approaches have been proposed to quantify the business value, but some are trapped in technical complexity while others misguide managers into directly and subjectively judging some technical entities outside their domain of expertise. This paper describes a method on how to properly capture both perspectives based on a  probabilistic business-driven model. The proposed model presents a procedure to calculate the business value of IT services. The model also covers IT security services and their business value as an important aspect of IT services that is not covered in previously published researches. The impact of changes in the quality of IT services on business value will also be discussed. A simulation and a case illustration are provided to show the possible application of the proposed model for a simple business process in an enterprise.

How to make a bridge between transformation and analysis technologies?

NARCIS (Netherlands)

Vinju, J.J.; Cordy, J.R.; Cordy, J.R.; Lämmel, R.; Winter, A.

2006-01-01

At the Dagstuhl seminar on Transformation Techniques in Software Engineering we had an organized discussion on the intricacies of engineering practicle connections between software analysis and software transformation tools. This abstract summarizes it. This discussion contributes mainly by

Fabrication of polymer micro-lens array with pneumatically diaphragm-driven drop-on-demand inkjet technology.

Science.gov (United States)

Xie, Dan; Zhang, Honghai; Shu, Xiayun; Xiao, Junfeng

2012-07-02

The paper reports an effective method to fabricate micro-lens arrays with the ultraviolet-curable polymer, using an original pneumatically diaphragm-driven drop-on-demand inkjet system. An array of plano convex micro-lenses can be formed on the glass substrate due to surface tension and hydrophobic effect. The micro-lens arrays have uniform focusing function, smooth and real planar surface. The fabrication process showed good repeatability as well, fifty micro-lenses randomly selected form 9 × 9 miro-lens array with an average diameter of 333.28μm showed 1.1% variations. Also, the focal length, the surface roughness and optical property of the fabricated micro-lenses are measured, analyzed and proved satisfactory. The technique shows great potential for fabricating polymer micro-lens arrays with high flexibility, simple technological process and low production cost.

Composition driven monolayer to bilayer transformation in a surfactant intercalated Mg-Al layered double hydroxide.

Science.gov (United States)

Naik, Vikrant V; Chalasani, Rajesh; Vasudevan, S

2011-03-15

The structure and organization of dodecyl sulfate (DDS) surfactant chains intercalated in an Mg-Al layered double hydroxide (LDH), Mg(1-x)Alx(OH)2, with differing Al/Mg ratios has been investigated. The Mg-Al LDHs can be prepared over a range of compositions with x varying from 0.167 to 0.37 and therefore provides a simple system to study how the organization of the alkyl chains of the intercalated DDS anions change with packing density; the Al/Mg ratio or x providing a convenient handle to do so. Powder X-ray diffraction measurements showed that at high packing densities (x ≥ 0.3) the alkyl chains of the intercalated dodecyl sulfate ions are anchored on opposing LDH sheets and arranged as bilayers with an interlayer spacing of ∼27 Å. At lower packing densities (x flat in the galleries with an interlayer spacing of ∼8 Å. For the in between compositions, 0.2 ≤ x organization of the chains and the interlayer spacing. The simulations are able to reproduce the composition driven monolayer to bilayer transformation in the arrangement of the intercalated surfactant chains and in addition provide insights into the factors that decide the arrangement of the surfactant chains in the two situations. In the bilayer arrangement, it is the dispersive van der Waals interactions between chains in opposing layers of the anchored bilayer that is responsible for the cohesive energy of the solid whereas at lower packing densities, where a monolayer arrangement is favored, Coulomb interactions between the positively charged Mg-Al LDH sheets and the negatively charged headgroup of the DDS anion dominate.

INTRODUCTION OF GENERALIZED LAPLACE-FRACTIONAL MELLIN TRANSFORM

OpenAIRE

V. D. Sharma*, M. M. Thakare

2016-01-01

In present era, Fractional Integral Transform plays an important role in various fields of mathematics and Technology. Mellin transform has an many application in navigations, correlaters, in area of statistics, probability and also solving in differential equation. Fractional Mellin transform is integral part of mathematical modeling method because of its scale invariance property. The aim of this paper is to generalization of Laplace-Fractional Mellin Transform. Analyticity theore...

The economics of energy market transformation programs

International Nuclear Information System (INIS)

Duke, R.; Kammen, D.M.

1999-01-01

This paper evaluates three energy-sector market transformation programs: the US Environmental Protection Agency's Green Lights program to promote on-grid efficient lighting; the World Bank Group's new Photovoltaic Market Transformation Initiative; and the federal grain ethanol subsidy. The authors develop a benefit-cost model that uses experience curves to estimate unit cost reductions as a function of cumulative production. Accounting for dynamic feedback between the demand response and price reductions from production experience raises the benefit-cost ratio (BCR) of the first two programs substantially. The BCR of the ethanol program, however, is approximately zero, illustrating a technology for which subsidization was not justified. Their results support a broader role for market transformation programs to commercialize new environmentally attractive technologies, but the ethanol experience suggests moderately funding a broad portfolio composed of technologies that meet strict selection criteria

Technological acceleration and organizational transformations in the upstream oil and gas industry; Acceleration technologique et transformations organisationnelles dans l'industrie d'exploration-production d'hydrocarbures

Energy Technology Data Exchange (ETDEWEB)

Isabelle, M

2000-12-15

The upstream oil and gas industry experienced a dramatic technological acceleration in the early 1970's. The relationships between the agents in this industry have themselves undergone deep changes since that date. This thesis shows that a tight link exists between the technological acceleration and the organizational transformations in the upstream oil and gas industry. In a first part, it focuses on the economic theory's developments concerning industrial organization. In a second part, it applies these developments to three types of relations: those between the owner-states of hydrocarbon resources and the international petroleum companies; those between the international petroleum companies and their subcontractors; and finally those between the international petroleum companies themselves. (author)

IRON OPTIMIZATION FOR FENTON-DRIVEN OXIDATION OF MTBE-SPENT GRANULAR ACTIVATED CARBON

Science.gov (United States)

Fenton-driven chemical regeneration of granular activated carbon (GAC) is accomplished through the addition of H2O2 and iron (Fe) to spent GAC. The overall objective of this treatment process is to transform target contaminants into less toxic byproducts, re-establish the sorpti...

Laser-driven polarized sources of hydrogen and deuterium

International Nuclear Information System (INIS)

Young, L.; Holt, R.J.; Green, M.C.; Kowalczyk, R.S.

1988-01-01

A novel laser-driven polarized source of hydrogen and deuterium which operates on the principle of spin exchange optical pumping is described. The advantages of this method over conventional polarized sources for internal target experiments are presented. Technological difficulties which prevent ideal source operation are outlined along with proposed solutions. At present, the laser-driven polarized hydrogen source delivers 8 /times/ 10 16 atoms/s with a polarization (P/sub z/) of 24%. 9 refs., 2 figs

Transformative Reduction of Transportation Greenhouse Gas Emissions. Opportunities for Change in Technologies and Systems

Energy Technology Data Exchange (ETDEWEB)

Vimmerstedt, Laura [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brown, Austin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Newes, Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yimin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chipman, Peter [U.S. Department of Transportation, Washington, D.C. (United States); Johnson, Shawn [U.S. Department of Transportation, Washington, D.C. (United States)

2015-04-30

The transportation sector is changing, influenced by concurrent, ongoing, dynamic trends that could dramatically affect the future energy landscape, including effects on the potential for greenhouse gas emissions reductions. Battery cost reductions and improved performance coupled with a growing number of electric vehicle model offerings are enabling greater battery electric vehicle market penetration, and advances in fuel cell technology and decreases in hydrogen production costs are leading to initial fuel cell vehicle offerings. Radically more efficient vehicles based on both conventional and new drivetrain technologies reduce greenhouse gas emissions per vehicle-mile. Net impacts also depend on the energy sources used for propulsion, and these are changing with increased use of renewable energy and unconventional fossil fuel resources. Connected and automated vehicles are emerging for personal and freight transportation systems and could increase use of low- or non-emitting technologies and systems; however, the net effects of automation on greenhouse gas emissions are uncertain. The longstanding trend of an annual increase in transportation demand has reversed for personal vehicle miles traveled in recent years, demonstrating the possibility of lower-travel future scenarios. Finally, advanced biofuel pathways have continued to develop, highlighting low-carbon and in some cases carbon-negative fuel pathways. We discuss the potential for transformative reductions in petroleum use and greenhouse gas emissions through these emerging transportation-sector technologies and trends and present a Clean Transportation Sector Initiative scenario for such reductions, which are summarized in Table ES-1.

Experiences in Teaching a Graduate Course on Model-Driven Software Development

Science.gov (United States)

Tekinerdogan, Bedir

2011-01-01

Model-driven software development (MDSD) aims to support the development and evolution of software intensive systems using the basic concepts of model, metamodel, and model transformation. In parallel with the ongoing academic research, MDSD is more and more applied in industrial practices. After being accepted both by a broad community of…

Single-cell technologies to study the immune system.

Science.gov (United States)

Proserpio, Valentina; Mahata, Bidesh

2016-02-01

The immune system is composed of a variety of cells that act in a coordinated fashion to protect the organism against a multitude of different pathogens. The great variability of existing pathogens corresponds to a similar high heterogeneity of the immune cells. The study of individual immune cells, the fundamental unit of immunity, has recently transformed from a qualitative microscopic imaging to a nearly complete quantitative transcriptomic analysis. This shift has been driven by the rapid development of multiple single-cell technologies. These new advances are expected to boost the detection of less frequent cell types and transient or intermediate cell states. They will highlight the individuality of each single cell and greatly expand the resolution of current available classifications and differentiation trajectories. In this review we discuss the recent advancement and application of single-cell technologies, their limitations and future applications to study the immune system. © 2015 The Authors. Immunology Published by John Wiley & Sons Ltd.

PRAGMATICS DRIVEN LAND COVER SERVICE COMPOSITION UTILIZING BEHAVIOR-INTENTION MODEL

Directory of Open Access Journals (Sweden)

H. Wu

2016-06-01

Full Text Available Web service composition is one of the key issues to develop a global land cover (GLC information service portal. Aiming at the defect that traditional syntax and semantic service compositionare difficult to take pragmatic information into account, the paper firstly analyses three tiers of web service language and their succession relations, discusses the conceptual model of pragmatic web service, and proposes the idea of pragmatics-oriented adaptive composition method based on the analysis of some examples. On this basis it puts forward the pragmatic web service model based on Behavior-Intention through presetting and expression of service usability, users' intention, and other pragmatic information, develops the on-demand assembly method based on the agent theory and matching and reconstruction method on heterogeneous message, solves the key technological issue of algorithm applicability and heterogeneous message transformation in the process of covering web service composition on the ground, applies these methods into service combination, puts forward the pragmatic driven service composition method based on behavior-intention model, and effectively settles the issue of coordination and interaction of composite service invocation.

Plastid transformation in potato: Solanum tuberosum.

Science.gov (United States)

Valkov, Vladimir T; Gargano, Daniela; Scotti, Nunzia; Cardi, Teodoro

2014-01-01

Although plastid transformation has attractive advantages and potential applications in plant biotechnology, for long time it has been highly efficient only in tobacco. The lack of efficient selection and regeneration protocols and, for some species, the inefficient recombination using heterologous flanking regions in transformation vectors prevented the extension of the technology to major crops. However, the availability of this technology for species other than tobacco could offer new possibilities in plant breeding, such as resistance management or improvement of nutritional value, with no or limited environmental concerns. Herein we describe an efficient plastid transformation protocol for potato (Solanum tuberosum subsp. tuberosum). By optimizing the tissue culture system and using transformation vectors carrying homologous potato flanking sequences, we obtained up to one transplastomic shoot per bombardment. Such efficiency is comparable to that usually achieved in tobacco. The method described in this chapter can be used to regenerate potato transplastomic plants expressing recombinant proteins in chloroplasts as well as in amyloplasts.

PHEMT Distributed Power Amplifier Adopting Broadband Impedance Transformer

DEFF Research Database (Denmark)

Narendra, K.; Limiti, E.; Paoloni, C.

2013-01-01

A non-uniform drain line distributed power amplifier (DPA) employing a broadband impedance transformer is presented. The DPA is based on GaAs PHEMT technology. The impedance transformer employs asymmetric coupled lines and transforms a low output impedance of the amplifier to a standard 50 Ω...

Impurities block the alpha to omega martensitic transformation in titanium.

Science.gov (United States)

Hennig, Richard G; Trinkle, Dallas R; Bouchet, Johann; Srinivasan, Srivilliputhur G; Albers, Robert C; Wilkins, John W

2005-02-01

Impurities control phase stability and phase transformations in natural and man-made materials, from shape-memory alloys to steel to planetary cores. Experiments and empirical databases are still central to tuning the impurity effects. What is missing is a broad theoretical underpinning. Consider, for example, the titanium martensitic transformations: diffusionless structural transformations proceeding near the speed of sound. Pure titanium transforms from ductile alpha to brittle omega at 9 GPa, creating serious technological problems for beta-stabilized titanium alloys. Impurities in the titanium alloys A-70 and Ti-6Al-4V (wt%) suppress the transformation up to at least 35 GPa, increasing their technological utility as lightweight materials in aerospace applications. These and other empirical discoveries in technological materials call for broad theoretical understanding. Impurities pose two theoretical challenges: the effect on the relative phase stability, and the energy barrier of the transformation. Ab initio methods calculate both changes due to impurities. We show that interstitial oxygen, nitrogen and carbon retard the transformation whereas substitutional aluminium and vanadium influence the transformation by changing the d-electron concentration. The resulting microscopic picture explains the suppression of the transformation in commercial A-70 and Ti-6Al-4V alloys. In general, the effect of impurities on relative energies and energy barriers is central to understanding structural phase transformations.

Quasienergy spectrum and tunneling current in ac-driven triple quantum dot shuttles

Energy Technology Data Exchange (ETDEWEB)

Villavicencio, J [Facultad de Ciencias, Universidad Autonoma de Baja California, Ensenada (Mexico); Maldonado, I [Centro de Investigacion Cientifica y de Educacion Superior de Ensenada (Mexico); Cota, E [Centro de Nanociencias y Nanotecnologia, Universidad Nacional Autonoma de Mexico, Ensenada (Mexico); Platero, G, E-mail: villavics@uabc.edu.mx [Instituto de Ciencia de Materiales de Madrid (CSIC), Cantoblanco, 28049 Madrid (Spain)

2011-02-15

The dynamics of electrons in ac-driven double quantum dots have been extensively analyzed by means of Floquet theory. In these systems, coherent destruction of tunneling has been shown to occur for certain ac field parameters. In this work we analyze, by means of Floquet theory, the electron dynamics of a triple quantum dot in series attached to electric contacts, where the central dot position oscillates. In particular, we analyze the quasienergy spectrum of this ac-driven nanoelectromechanical system as a function of the intensity and frequency of the ac field and of external dc voltages. For strong driving fields, we derive, by means of perturbation theory, analytical expressions for the quasienergies of the driven oscillator system. From this analysis, we discuss the conditions for coherent destruction of tunneling (CDT) to occur as a function of detuning and field parameters. For zero detuning, and from the invariance of the Floquet Hamiltonian under a generalized parity transformation, we find analytical expressions describing the symmetry properties of the Fourier components of the Floquet states under such a transformation. By using these expressions, we show that in the vicinity of the CDT condition, the quasienergy spectrum exhibits exact crossings which can be characterized by the parity properties of the corresponding eigenvectors.

Constellations-driven innovation

DEFF Research Database (Denmark)

Hansbøl, Mikala

2011-01-01

The paper presents a science and technology studies and actor-network-theory inspired approach to understanding the development and ongoing re-didactication and re-design of a Danish developed presentation tool called the Theme Board (Tematavlen.dk). It is argued that this approach provides a par...... a particularly useful point of departure for engaging in researching innovation and didactic design of digital teaching and learning instruments such as the Theme Board that are programmed and serviced 'in the sky'. I call this approach: constellation-driven innovations....

Towards Product Lining Model-Driven Development Code Generators

OpenAIRE

Roth, Alexander; Rumpe, Bernhard

2015-01-01

A code generator systematically transforms compact models to detailed code. Today, code generation is regarded as an integral part of model-driven development (MDD). Despite its relevance, the development of code generators is an inherently complex task and common methodologies and architectures are lacking. Additionally, reuse and extension of existing code generators only exist on individual parts. A systematic development and reuse based on a code generator product line is still in its inf...

Effects-Driven IT Development

DEFF Research Database (Denmark)

Hertzum, Morten; Simonsen, Jesper

2011-01-01

For customers information technology (IT) is a means to an end. This tight association between IT systems and their use is, however, often absent during their development and implementation, resulting in systems that may fail to produce desired ends. Effects-driven IT development aims to avoid...... change that realize the specified effects, and (c) measuring the absence or presence of the specified effects during pilot use of the system while also remaining alert to the emergence of beneficial but hitherto unspecified effects. In this paper we explore effects-driven IT development and discuss...... the possibilities and challenges involved in making it an instrument for managing IT projects. Two main challenges are that effects must be measured while development is still ongoing, making pilot implementations a central activity, and that vendor and customer must extend their collaboration, particularly...

76 FR 54790 - Large Power Transformers From Korea

Science.gov (United States)

2011-09-02

... Transformers From Korea Determination On the basis of the record \\1\\ developed in the subject investigation... transformers, provided for in subheadings 8504.23.00 and 8504.90.95 of the Harmonized Tariff Schedule of the...., Lynchburg, VA; and Pennsylvania Transformer Technology Inc., Canonsburg, PA, alleging that an industry in...

Designing Opportunities for Transformation with Emerging Technologies

Science.gov (United States)

Veletsianos, George

2011-01-01

In this article, the author argues that technology use in education has focused on combating instructional problems and inefficiencies. While technology use for such purposes is viable and important, the author proposes that practitioners and researchers in this field utilize emerging technologies as a means to provide opportunities for personally…

Model Driven Engineering with Ontology Technologies

Science.gov (United States)

Staab, Steffen; Walter, Tobias; Gröner, Gerd; Parreiras, Fernando Silva

Ontologies constitute formal models of some aspect of the world that may be used for drawing interesting logical conclusions even for large models. Software models capture relevant characteristics of a software artifact to be developed, yet, most often these software models have limited formal semantics, or the underlying (often graphical) software language varies from case to case in a way that makes it hard if not impossible to fix its semantics. In this contribution, we survey the use of ontology technologies for software modeling in order to carry over advantages from ontology technologies to the software modeling domain. It will turn out that ontology-based metamodels constitute a core means for exploiting expressive ontology reasoning in the software modeling domain while remaining flexible enough to accommodate varying needs of software modelers.

A Study on quality improvement and application technology in pad-mounted transformers

Energy Technology Data Exchange (ETDEWEB)

Kim, Soon Tae; Mun, Kyung Hwa; Jung, Dong Won; Kim, Sang Jun; Lee, Nam Woo; Kang, Nae Kuk; Kim, Dong Mung [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Kim, Kwang Ha; Kang, Young Sik; Lee, Woo Young; Lyu, Hee Suk; Sun, Jong Ho; Lyu, Hyung Ki; Kim, Yik Soo; Park, Sung Jae; Kim, Won Ho [Korea Electrotechnology Research Inst., Changwon (Korea, Republic of)

1995-12-31

In order to increase the reliability of pad-mounted transformers, the authors investigated operating condition of pad-mounted transformers and understood their failure mechanisms. The objective of their study was to improve quality and operating condition and install switches to be able to check and maintain transformers and optimise protection devices and increase cooling effect in pad-mounted transformers (author). 65 refs., 130 figs.

Telehealth: seven strategies to successfully implement disruptive technology and transform health care.

Science.gov (United States)

Schwamm, Lee H

2014-02-01

"Telehealth" refers to the use of electronic services to support a broad range of remote services, such as patient care, education, and monitoring. Telehealth must be integrated into traditional ambulatory and hospital-based practices if it is to achieve its full potential, including addressing the six domains of care quality defined by the Institute of Medicine: safe, effective, patient-centered, timely, efficient, and equitable. Telehealth is a disruptive technology that appears to threaten traditional health care delivery but has the potential to reform and transform the industry by reducing costs and increasing quality and patient satisfaction. This article outlines seven strategies critical to successful telehealth implementation: understanding patients' and providers' expectations, untethering telehealth from traditional revenue expectations, deconstructing the traditional health care encounter, being open to discovery, being mindful of the importance of space, redesigning care to improve value in health care, and being bold and visionary.

Theory of many-body localization in periodically driven systems

International Nuclear Information System (INIS)

Abanin, Dmitry A.; De Roeck, Wojciech; Huveneers, François

2016-01-01

We present a theory of periodically driven, many-body localized (MBL) systems. We argue that MBL persists under periodic driving at high enough driving frequency: The Floquet operator (evolution operator over one driving period) can be represented as an exponential of an effective time-independent Hamiltonian, which is a sum of quasi-local terms and is itself fully MBL. We derive this result by constructing a sequence of canonical transformations to remove the time-dependence from the original Hamiltonian. When the driving evolves smoothly in time, the theory can be sharpened by estimating the probability of adiabatic Landau–Zener transitions at many-body level crossings. In all cases, we argue that there is delocalization at sufficiently low frequency. We propose a phase diagram of driven MBL systems.

RET/PTC1-Driven Neoplastic Transformation and Proinvasive Phenotype of Human Thyrocytes Involve Met Induction and β-Catenin Nuclear Translocation

Directory of Open Access Journals (Sweden)

Giuliana Cassinelli

2009-01-01

Full Text Available Activation of the RET gene by chromosomal rearrangements generating RET/PTC oncogenes is a frequent, early, and causative event in papillary thyroid carcinoma (PTC. We have previously shown that, in human primary thyrocytes, RET/PTC1 induces a transcriptional program including the MET proto-oncogene. In PTCs, β-catenin is frequently mislocated to the cytoplasm nucleus. We investigated the interplay between Ret/ptc1 signaling and Met in regulating the proinvasive phenotype and β-catenin localization in cellular models of human PTC. Here, we show that Met protein is expressed and is constitutively active in human thyrocytes exogenously expressing RET/PTC1 as well as a mutant (Y451F devoid of the main Ret/ptc1 multidocking site. Both in transformed thyrocytes and in the human PTC cell line TPC-1, Ret/ptc1-Y451-dependent signaling and Met cooperated to promote a proinvasive phenotype. Accordingly, gene/functional silencing of either RET/PTC1 or MET abrogated early branching morphogenesis in TPC-1 cells. The same effect was obtained by blocking the common downstream effector Akt. Y451 of Ret/ptc1 was required to promote proliferation and nuclear translocation of β-catenin, suggesting that these oncogene-driven effects are Met-independent. Pharmacologic inhibition of Ret/ptc1 and Met tyrosine kinases by the multitarget small molecule RPI-1 blocked cell proliferation and invasive ability and dislocated β-catenin from the nucleus. Altogether, these results support that Ret/ptc1 cross talks with Met at transcriptional and signaling levels and promotes β-catenin transcriptional activity to drive thyrocyte neoplastic transformation. Such molecular network, promoting disease initiation and acquisition of a proinvasive phenotype, highlights new options to design multitarget therapeutic strategies for PTCs.

Vapor Compressor Driven Hybrid Two-Phase Loop, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will demonstrate a vapor compressor driven hybrid two-phase loop technology. The hybrid two-phase loop...

Laser-driven ion acceleration: methods, challenges and prospects

Science.gov (United States)

Badziak, J.

2018-01-01

The recent development of laser technology has resulted in the construction of short-pulse lasers capable of generating fs light pulses with PW powers and intensities exceeding 1021 W/cm2, and has laid the basis for the multi-PW lasers, just being built in Europe, that will produce fs pulses of ultra-relativistic intensities ~ 1023 - 1024 W/cm2. The interaction of such an intense laser pulse with a dense target can result in the generation of collimated beams of ions of multi-MeV to GeV energies of sub-ps time durations and of extremely high beam intensities and ion fluencies, barely attainable with conventional RF-driven accelerators. Ion beams with such unique features have the potential for application in various fields of scientific research as well as in medical and technological developments. This paper provides a brief review of state-of-the art in laser-driven ion acceleration, with a focus on basic ion acceleration mechanisms and the production of ultra-intense ion beams. The challenges facing laser-driven ion acceleration studies, in particular those connected with potential applications of laser-accelerated ion beams, are also discussed.

A low carbon industrial revolution? Insights and challenges from past technological and economic transformations

International Nuclear Information System (INIS)

Pearson, Peter J.G.; Foxon, Timothy J.

2012-01-01

Recent efforts to promote a transition to a low carbon economy have been influenced by suggestions that a low carbon transition offers challenges and might yield economic benefits comparable to those of the previous industrial revolutions. This paper examines these arguments and the challenges facing a low carbon transition, by drawing on recent thinking on the technological, economic and institutional factors that enabled and sustained the first (British) industrial revolution, and the role of ‘general purpose technologies’ in stimulating and sustaining this and subsequent industrial transformation processes that have contributed to significant macroeconomic gains. These revolutions involved profound, long drawn-out changes in economy, technology and society; and although their energy transitions led to long-run economic benefits, they took many decades to develop. To reap significant long-run economic benefits from a low carbon transition sooner rather than later would require systemic efforts and incentives for low carbon innovation and substitution of high-carbon technologies. We conclude that while achieving a low carbon transition may require societal changes on a scale comparable with those of previous industrial revolutions, this transition does not yet resemble previous industrial revolutions. A successful low carbon transition would, however, amount to a different kind of industrial revolution. - Highlights: ► Investigates lessons for a low carbon transition from past industrial revolutions. ► Explores the implications of ‘general purpose technologies’ and their properties. ► Examines analysis of ‘long waves’ of technological progress and diffusion. ► Draws insights for low carbon transitions and policy.

Analysing Changes in Electricity Industries Against Actors and Technologies: Utility to Business Transformations in Denmark, Germany, Finland and Spain

Directory of Open Access Journals (Sweden)

Mari Ratinen

2012-07-01

Full Text Available Liberalization of electricity markets, governmental policies for renewable electricity and technology development are transforming national electricity industries. However, there are considerable national differences in how these industries have changed and which businesses have been developed. We propose a typology for comparing changes in electricity industry based on the changes in the actors and technologies. Wind power and solar photovoltaic are used here as technology examples. A qualitative analysis of the changes in electricity industries in four EU member states is presented. Based on the preliminary findings, we conclude that if the industry consists of many, small firms with relatively loose ties with the government the industry is more likely to change than if it consists of few large firms with strong relations with the government.

Model-driven Service Engineering with SoaML

Science.gov (United States)

Elvesæter, Brian; Carrez, Cyril; Mohagheghi, Parastoo; Berre, Arne-Jørgen; Johnsen, Svein G.; Solberg, Arnor

This chapter presents a model-driven service engineering (MDSE) methodology that uses OMG MDA specifications such as BMM, BPMN and SoaML to identify and specify services within a service-oriented architecture. The methodology takes advantage of business modelling practices and provides a guide to service modelling with SoaML. The presentation is case-driven and illuminated using the telecommunication example. The chapter focuses in particular on the use of the SoaML modelling language as a means for expressing service specifications that are aligned with business models and can be realized in different platform technologies.

Science-Driven Computing: NERSC's Plan for 2006-2010

Energy Technology Data Exchange (ETDEWEB)

Simon, Horst D.; Kramer, William T.C.; Bailey, David H.; Banda,Michael J.; Bethel, E. Wes; Craw, James M.; Fortney, William J.; Hules,John A.; Meyer, Nancy L.; Meza, Juan C.; Ng, Esmond G.; Rippe, Lynn E.; Saphir, William C.; Verdier, Francesca; Walter, Howard A.; Yelick,Katherine A.

2005-05-16

NERSC has developed a five-year strategic plan focusing on three components: Science-Driven Systems, Science-Driven Services, and Science-Driven Analytics. (1) Science-Driven Systems: Balanced introduction of the best new technologies for complete computational systems--computing, storage, networking, visualization and analysis--coupled with the activities necessary to engage vendors in addressing the DOE computational science requirements in their future roadmaps. (2) Science-Driven Services: The entire range of support activities, from high-quality operations and user services to direct scientific support, that enable a broad range of scientists to effectively use NERSC systems in their research. NERSC will concentrate on resources needed to realize the promise of the new highly scalable architectures for scientific discovery in multidisciplinary computational science projects. (3) Science-Driven Analytics: The architectural and systems enhancements and services required to integrate NERSC's powerful computational and storage resources to provide scientists with new tools to effectively manipulate, visualize, and analyze the huge data sets derived from simulations and experiments.

Accelerator driven systems for energy production and waste incineration: Physics, design and related nuclear data

International Nuclear Information System (INIS)

Herman, M.; Stanculescu, A.; Paver, N.

2003-01-01

This volume contains the notes of lectures given at the workshops 'Hybrid Nuclear Systems for Energy Production, Utilisation of Actinides and Transmutation of Long-lived Radioactive Waste' and 'Nuclear Data for Science and Technology: Accelerator Driven Waste Incineration', held at the Abdus Salam ICTP in September 2001. The subject of the first workshop was focused on the so-called Accelerator Driven Systems, and covered the most important physics and technological aspects of this innovative field. The second workshop was devoted to an exhaustive survey on the acquisition, evaluation, retrieval and validation of the nuclear data relevant to the design of Accelerator Driven Systems

Accelerator driven systems for energy production and waste incineration: Physics, design and related nuclear data

Energy Technology Data Exchange (ETDEWEB)

Herman, M; Stanculescu, A [International Atomic Energy Agency, Vienna (Austria); Paver, N [University of Trieste and INFN, Trieste (Italy)

2003-06-15

This volume contains the notes of lectures given at the workshops 'Hybrid Nuclear Systems for Energy Production, Utilisation of Actinides and Transmutation of Long-lived Radioactive Waste' and 'Nuclear Data for Science and Technology: Accelerator Driven Waste Incineration', held at the Abdus Salam ICTP in September 2001. The subject of the first workshop was focused on the so-called Accelerator Driven Systems, and covered the most important physics and technological aspects of this innovative field. The second workshop was devoted to an exhaustive survey on the acquisition, evaluation, retrieval and validation of the nuclear data relevant to the design of Accelerator Driven Systems.

Cultivating Inquiry-Driven Learners: A College Education for the Twenty-First Century

Science.gov (United States)

Conrad, Clifton; Dunek, Laura

2012-01-01

Inquiry-driven learners anticipate, embrace, and adapt to disruptive change. Clifton Conrad and Laura Dunek advance a transformative purpose of a college education. They invite stakeholders from across higher education to engage in vigorous dialogue about the aims of a college education--and how to realize those aims. Increasingly influenced by…

Part I.5: Perspectives on Technological Transformation

DEFF Research Database (Denmark)

Müller, Jens

2003-01-01

The article describes the transfer processes between the different technology and social systems......The article describes the transfer processes between the different technology and social systems...

Power Transformer Operating State Prediction Method Based on an LSTM Network

Directory of Open Access Journals (Sweden)

Hui Song

2018-04-01

Full Text Available The state of transformer equipment is usually manifested through a variety of information. The characteristic information will change with different types of equipment defects/faults, location, severity, and other factors. For transformer operating state prediction and fault warning, the key influencing factors of the transformer panorama information are analyzed. The degree of relative deterioration is used to characterize the deterioration of the transformer state. The membership relationship between the relative deterioration degree of each indicator and the transformer state is obtained through fuzzy processing. Through the long short-term memory (LSTM network, the evolution of the transformer status is extracted, and a data-driven state prediction model is constructed to realize preliminary warning of a potential fault of the equipment. Through the LSTM network, the quantitative index and qualitative index are organically combined in order to perceive the corresponding relationship between the characteristic parameters and the operating state of the transformer. The results of different time-scale prediction cases show that the proposed method can effectively predict the operation status of power transformers and accurately reflect their status.

Managing business compliance using model-driven security management

Science.gov (United States)

Lang, Ulrich; Schreiner, Rudolf

Compliance with regulatory and governance standards is rapidly becoming one of the hot topics of information security today. This is because, especially with regulatory compliance, both business and government have to expect large financial and reputational losses if compliance cannot be ensured and demonstrated. One major difficulty of implementing such regulations is caused the fact that they are captured at a high level of abstraction that is business-centric and not IT centric. This means that the abstract intent needs to be translated in a trustworthy, traceable way into compliance and security policies that the IT security infrastructure can enforce. Carrying out this mapping process manually is time consuming, maintenance-intensive, costly, and error-prone. Compliance monitoring is also critical in order to be able to demonstrate compliance at any given point in time. The problem is further complicated because of the need for business-driven IT agility, where IT policies and enforcement can change frequently, e.g. Business Process Modelling (BPM) driven Service Oriented Architecture (SOA). Model Driven Security (MDS) is an innovative technology approach that can solve these problems as an extension of identity and access management (IAM) and authorization management (also called entitlement management). In this paper we will illustrate the theory behind Model Driven Security for compliance, provide an improved and extended architecture, as well as a case study in the healthcare industry using our OpenPMF 2.0 technology.

Prompt nuclear analytical techniques for material research in accelerator driven transmutation technologies: Prospects and quantitative analyses

International Nuclear Information System (INIS)

Vacik, J.; Hnatowicz, V.; Cervena, J.; Perina, V.; Mach, R.

1998-01-01

Accelerator driven transmutation technology (ADTT) is a promising way toward liquidation of spent nuclear fuel, nuclear wastes and weapon grade Pu. The ADTT facility comprises a high current (proton) accelerator supplying a sub-critical reactor assembly with spallation neutrons. The reactor part is supposed to be cooled by molten fluorides or metals which serve, at the same time, as a carrier of nuclear fuel. Assumed high working temperature (400-600 C) and high radiation load in the subcritical reactor and spallation neutron source put forward the problem of optimal choice of ADTT construction materials, especially from the point of their radiation and corrosion resistance when in contact with liquid working media. The use of prompt nuclear analytical techniques in ADTT related material research is considered and examples of preliminary analytical results obtained using neutron depth profiling method are shown for illustration. (orig.)

Research on accelerator-driven transmutation and studies of experimental facilities

Energy Technology Data Exchange (ETDEWEB)

Takizuka, Takakazu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-11-01

JAERI is carrying out R and Ds on accelerator-driven transmutation systems under the national OMEGA Program that aims at development of the technology to improve efficiency and safety in the final disposal of radioactive waste. Research facilities for accelerator-driven transmutation experiments are proposed to construct within the framework of the planned JAERI Neutron Science Project. This paper describes the features of the proposed accelerator-driven transmutation systems and their technical issues to be solved. A research facility plan under examination is presented. The plan is divided in two phases. In the second phase, technical feasibility of accelerator-driven systems will be demonstrated with a 30-60 MW experimental integrated system and with a 7 MW high-power target facility. (author)

Model-driven design of simulation support for the TERRA robot software tool suite

NARCIS (Netherlands)

Lu, Zhou; Bezemer, M.M.; Broenink, Johannes F.

2015-01-01

Model-Driven Development (MDD) – based on the concepts of model, meta-model and model transformation – is an approach to develop predictable and re- liable software for Cyber-Physical Systems (CPS). The work presented here concerns a methodology to design simulation software based on MDD techniques,

Power transformers quality assurance

CERN Document Server

Dasgupta, Indrajit

2009-01-01

About the Book: With the view to attain higher reliability in power system operation, the quality assurance in the field of distribution and power transformers has claimed growing attention. Besides new developments in the material technology and manufacturing processes of transformers, regular diagnostic testing and maintenance of any engineering product may be ascertained by ensuring: right selection of materials and components and their quality checks. application of correct manufacturing processes any systems engineering. the user`s awareness towards preventive maintenance. The

From requirements to Java in a snap model-driven requirements engineering in practice

CERN Document Server

Smialek, Michal

2015-01-01

This book provides a coherent methodology for Model-Driven Requirements Engineering which stresses the systematic treatment of requirements within the realm of modelling and model transformations. The underlying basic assumption is that detailed requirements models are used as first-class artefacts playing a direct role in constructing software. To this end, the book presents the Requirements Specification Language (RSL) that allows precision and formality, which eventually permits automation of the process of turning requirements into a working system by applying model transformations and co

Generating WS-SecurityPolicy documents via security model transformation

DEFF Research Database (Denmark)

Jensen, Meiko

2009-01-01

When SOA-based business processes are to be enhanced with security properties, the model-driven business process development approach enables an easier and more reliable security definition compared to manually crafting the security realizations afterwards. In this paper, we outline an appropriat...... security model definition and transformation approach, targeting the WS-SecurityPolicy and WS-BPEL specifications, in order to enable a Web-Service-based secure business process development.......When SOA-based business processes are to be enhanced with security properties, the model-driven business process development approach enables an easier and more reliable security definition compared to manually crafting the security realizations afterwards. In this paper, we outline an appropriate...

Importance of policy for energy system transformation: Diffusion of PV technology in Japan and Germany

International Nuclear Information System (INIS)

Chowdhury, Sanjeeda; Sumita, Ushio; Islam, Ashraful; Bedja, Idriss

2014-01-01

Photovoltaic (PV) has the highest cost reduction potential among all renewable energy sources (RES). To overcome institutional barriers, developing the technology, and creating an initial market, policies are needed. Comparative case studies of Japan and German PV sector from 1990 to 2011 were developed. Japan dominated the PV industry during 1994–2004, PV market increased to 290 MW in 2005. After 2005 Japan's PV market decreased. German PV market increased from 44 MW in 2000 to 7.5 GW in 2011. The reason behind Japanese PV market decline was the unaligned energy policy and termination of incentives. This paper discusses about successful policy implementation and the impact of policy for the diffusion of PV technology. The analysis section of this paper shows how much the PV technology has been diffused during the period of 1990–2011 and finally what will make the transformation process successful. - Highlights: • We studied PV diffusion of Japan and German considering public energy policy, environmental policy and cost reduction. • This study determined that policy and incentives are responsible for cost reduction. • Japans concentration on nuclear energy more than renewables, made the PV diffusion slow. • Successful implementation of FIT helped Germany reduce PV electricity price more than grid electricity

Transforming Security Screening With Biometrics

National Research Council Canada - National Science Library

Hearnsberger, Brian J

2003-01-01

... and identity theft to dramatically improve physical security. Today, biometric technology could be implemented to transform physical security by enhancing screening procedures currently in use at U.S...

Sport Technology

CSIR Research Space (South Africa)

Kirkbride, T

2007-11-01

Full Text Available Technology is transforming the games themselves and at times with dire consequences. Tony Kirkbride, Head: CSIR Technology Centre said there are a variety of sports technologies and there have been advances in material sciences and advances...

Photonics technology and University-driven business co-creation

DEFF Research Database (Denmark)

Tanev, Stoyan; Østergaard, John Erland; Andersen, Thomas Bue Søndergaard

2012-01-01

TEK-Momentum is the Business Innovation and Technology Department in the Faculty of Engineering at the University of Southern Denmark in Odense. Since its establishment in 2010 the Department has adopted an exploratory technology transfer, open business development and co-creation strategy...... that goes beyond traditional technology transfer activities. This is an emerging strategy that has been shaped for the last 5 years even before the formal establishment of TEK-Momentum. It emerged out of multiple dialog-based interactions with small- and medium-sized companies by focusing on matching real...

Going beyond best technology and lowest price: on renewable energy investors’ preference for service-driven business models

International Nuclear Information System (INIS)

Loock, Moritz

2012-01-01

Renewable energy is becoming increasingly important for economies in many countries. But still in an emerging industry, renewable energy requires supportive energy policy helping firms to develop and protect competitive advantages in global competition. As a guideline for designing such policy, we consult well-informed stakeholders within the renewable energy industry: investors. Their preferences serve as explorative indicator for assessing which business models might succeed in competition. To contribute to only limited research on renewable energy investors’ preferences, we ask, which business models investment managers for renewable energy prefer to invest in. We report from an explorative study of 380 choices of renewable energy investment managers. Based on the stated preferences, we modelled three generic business models to calculate the share of investors’ preferences. We find exiting evidence: a “customer intimacy” business model that proposes best services is much more preferred by investors than business models that propose lowest price or best technology. Policy-makers can use those insights for designing policy that supports service-driven business models for renewable energy with a scope on customer needs rather than technology or price. Additionally, we state important implications for renewable energy entrepreneurs, managers and research.

Accelerator-driven nuclear synergetic systems-an overview of the research activities in Sweden

International Nuclear Information System (INIS)

Conde, H.; Baecklin, A.; Carius, S.

1995-01-01

The rapid development of the accelerator technology which enables the construction of reliable and very intense neutron sources has initiated a growing interest for accelerator driven transmutation systems in Sweden. After the Specialist Meeting on Accelerator-Driven Transmutation Technology for Radwaste and other Applications on 24-28 June 1991 at Saltsjoebaden, Sweden, the research activities oriented towards accelerator-driven systems have been started at several research centers in Sweden. Also the governmental agencies responsible for the spent fuel policy showed a positive attitude to these activities through a limited financial support, particularly for studies of the safety aspects of these systems. Also the nuclear power industry and utilities show a positive interest in the research on these concepts. The present paper presents an overview of the Swedish research activities on accelerator-driven systems and the proposed future coordination, organizations and prospects for this research in the context of the national nuclear energy and spent fuel policy. The Swedish perspective for international cooperation is also described

Accelerator-driven nuclear synergetic systems-an overview of the research activities in Sweden

Energy Technology Data Exchange (ETDEWEB)

Conde, H.; Baecklin, A.; Carius, S. [Uppsala Univ. (Sweden)] [and others

1995-10-01

The rapid development of the accelerator technology which enables the construction of reliable and very intense neutron sources has initiated a growing interest for accelerator driven transmutation systems in Sweden. After the Specialist Meeting on Accelerator-Driven Transmutation Technology for Radwaste and other Applications on 24-28 June 1991 at Saltsjoebaden, Sweden, the research activities oriented towards accelerator-driven systems have been started at several research centers in Sweden. Also the governmental agencies responsible for the spent fuel policy showed a positive attitude to these activities through a limited financial support, particularly for studies of the safety aspects of these systems. Also the nuclear power industry and utilities show a positive interest in the research on these concepts. The present paper presents an overview of the Swedish research activities on accelerator-driven systems and the proposed future coordination, organizations and prospects for this research in the context of the national nuclear energy and spent fuel policy. The Swedish perspective for international cooperation is also described.

Technology library modeling for information-driven circuit synthesis

NARCIS (Netherlands)

Jozwiak, L.; Bieganski, S.J.

2008-01-01

Due to weaknesses in circuit synthesis methods used in todaypsilas CAD tools, the opportunities created by modern microelectronic technology cannot effectively be exploited. This paper considers major issues and requirements of circuit synthesis for the nano CMOS technologies, and discusses our new

Proceedings of 12th international workshop on Asian network for accelerator-driven system and nuclear transmutation technology (ADS+NTT 2014)

International Nuclear Information System (INIS)

Pyeon, Cheol Ho

2015-01-01

The proceedings describe the current status on research and development (R and D) of accelerator-driven system (ADS) and nuclear transmutation techniques (NTT), including nuclear data, accelerator techniques, Pb-Bi target, fuel technologies and reactor physics, in East Asian countries: China, Japan and Korea. The proceedings also include all presentation materials presented in 'the 12th International Workshop on Asian Network for ADS and NTT (ADS+NTT 2014)' held at the Institute of Nuclear Energy and Safety Technology, Chinese Academy of Sciences, Hefei, China on 15th and 16th December, 2014. The objective of this workshop is to make actual progress of ADS R and D especially in East Asian countries, as well as in European countries, through sharing mutual interests and conducting the information exchange each other. The report is composed of these following items: Presentation materials: ADS+NTT 2014. (author)

Transforming Science Teaching Environment for the 21st Century Primary School Pupils

Science.gov (United States)

Sheikh Abdullah, Siti Hendon

2016-01-01

The transformation of technology in the 21st century has produced children who are technology savvy and exposed to the internet and social networking at a very young age. These children are already in our school system. Thus teachers too need to use technology and transform the learning environment to meet the requirements of these children. This…

Dynamically adaptive data-driven simulation of extreme hydrological flows

KAUST Repository

Kumar Jain, Pushkar; Mandli, Kyle; Hoteit, Ibrahim; Knio, Omar; Dawson, Clint

2017-01-01

evacuation in real-time and through the development of resilient infrastructure based on knowledge of how systems respond to extreme events. Data-driven computational modeling is a critical technology underpinning these efforts. This investigation focuses

Design and performance of a Tesla transformer type relativistic electron beam generator

International Nuclear Information System (INIS)

Jain, K.K.; Chennareddy, D.; John, P.I.; Saxena, Y.C.

1986-01-01

A relativistic electron beam generator driven by an air core Tesla transformer is described. The Tesla transformer circuit analysis is outlined and computational results are presented for the case when the coaxial water line has finite resistance. The transformer has a coupling coefficient of 0.56 and a step-up ratio of 25. The Tesla transformer can provide 800 kV at the peak of the second half cycle of the secondary output voltage and has been tested up to 600 kV. A 100-200 keV, 15-20 kA electron beam having 150 ns pulse width has been obtained. The beam generator described is being used for the beam injection into a toroidal device BETA. (author). 20 refs. 9 figures

Business Analytics as a Tool to Transforming Information into an Informing System: The Case of the On-Line Course Registration System

Directory of Open Access Journals (Sweden)

Dimitar Grozdanov Christozov

2017-06-01

Impact on Society\tTransforming Information towards Informing Systems has a significant impact by allowing users to make rational data driven decisions in an efficient way. Future Research:\tThe future of this project is implementation of developed ideas and assessment of the results. Impact on Society\t: Transforming Information towards Informing Systems has a significant impact by allowing users to make rational data driven decisions in an efficient way. Future Research: The future of this project is implementation of developed ideas and assessment of the results.

Investigation toward laser driven IFE (inertial fusion energy) power plant

International Nuclear Information System (INIS)

Nakai, S.; Kozaki, Y.; Izawa, Y.; Yamanaka, M.; Kanabe, T.; Kato, Y.; Norimatsu, T.; Nagai, K.; Nakatsuka, M.; Jitsuno, T.; Yamanaka, T.

2000-01-01

Based on the conceptual design of Laser Driven IFE Power Plant, the technical and physical issues have been examined. R and D on key issues which affect the feasibility of power plant has been performed taking into account the collaboration in the field of laser driver, fuel pellet, reaction chamber and system design. The coordination and collaboration organization of reactor technology experts in Japan on Laser Driven IFE Power Plant are reviewed. (authors)

Nano Manufacturing - Products and Technologies

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard; Alting, Leo

2004-01-01

The use of micro and nano technologies in components and products not only sets new demands to the manufacturing technologies. Product concepts have to be rethought and redefined in order to implement the micro and nano technologies into functional systems. Both a technology driven and a product ...

The influence of transformational leadership on employee well-being: results from a survey of companies in the information and communication technology sector in Germany.

Science.gov (United States)

Jacobs, Christine; Pfaff, Holger; Lehner, Birgit; Driller, Elke; Nitzsche, Anika; Stieler-Lorenz, Brigitte; Wasem, Jürgen; Jung, Julia

2013-07-01

The aim of this study was to investigate the impact of a transformational leadership style on employee well-being. Data for the study were taken from an on-line survey of all employees from six German companies in the information and communication technology sector. The data obtained were analyzed using multiple logistic regressions. Analysis of data from a total of 318 employees (response rate 58.4%) revealed a significant relationship between transformational leadership and employee well-being (P = 0.00; OR = 1.13; 95% CI = 1.05 to 1.22). A higher degree of perceived transformational leadership is associated with greater well-being. The results of this study suggest that a transformational leadership style, which both conveys a sense of trust and meaningfulness and individually challenges and develops employees, also has a positive effect on employee well-being.

Unifying approach for model transformations in the MOF metamodeling architecture

NARCIS (Netherlands)

Ivanov, Ivan; van den Berg, Klaas

2004-01-01

In the Meta Object Facility (MOF) metamodeling architecture a number of model transformation scenarios can be identified. It could be expected that a metamodeling architecture will be accompanied by a transformation technology supporting the model transformation scenarios in a uniform way. Despite

RET/PTC1-Driven Neoplastic Transformation and Proinvasive Phenotype of Human Thyrocytes Involve Met Induction and β-Catenin Nuclear Translocation1

Science.gov (United States)

Cassinelli, Giuliana; Favini, Enrica; Degl'Innocenti, Debora; Salvi, Alessandro; De Petro, Giuseppina; Pierotti, Marco A; Zunino, Franco; Borrello, Maria Grazia; Lanzi, Cinzia

2009-01-01

Activation of the RET gene by chromosomal rearrangements generating RET/PTC oncogenes is a frequent, early, and causative event in papillary thyroid carcinoma (PTC). We have previously shown that, in human primary thyrocytes, RET/PTC1 induces a transcriptional program including the MET proto-oncogene. In PTCs, β-catenin is frequently mislocated to the cytoplasm nucleus. We investigated the interplay between Ret/ptc1 signaling and Met in regulating the proinvasive phenotype and β-catenin localization in cellular models of human PTC. Here, we show that Met protein is expressed and is constitutively active in human thyrocytes exogenously expressing RET/PTC1 as well as a mutant (Y451F) devoid of the main Ret/ptc1 multidocking site. Both in transformed thyrocytes and in the human PTC cell line TPC-1, Ret/ptc1-Y451-dependent signaling and Met cooperated to promote a proinvasive phenotype. Accordingly, gene/functional silencing of either RET/PTC1 or MET abrogated early branching morphogenesis in TPC-1 cells. The same effect was obtained by blocking the common downstream effector Akt. Y451 of Ret/ptc1 was required to promote proliferation and nuclear translocation of β-catenin, suggesting that these oncogene-driven effects are Met-independent. Pharmacologic inhibition of Ret/ptc1 and Met tyrosine kinases by the multitarget small molecule RPI-1 blocked cell proliferation and invasive ability and dislocated β-catenin from the nucleus. Altogether, these results support that Ret/ptc1 cross talks with Met at transcriptional and signaling levels and promotes β-catenin transcriptional activity to drive thyrocyte neoplastic transformation. Such molecular network, promoting disease initiation and acquisition of a proinvasive phenotype, highlights new options to design multitarget therapeutic strategies for PTCs. PMID:19107227

Technology of magnetically driven accelerators

International Nuclear Information System (INIS)

Brix, D.L.; Hawkins, S.A.; Poor, S.E.; Reginato, L.L.; Smith, M.W.

1985-01-01

The marriage of Induction Linac technology with Nonlinear Magnetic Modulators has produced some unique capabilities. It appears possible to produce electron beams with average currents measured in amperes, at gradients exceeding 1 MeV/meter, and with power efficiencies approaching 50%. A 2 MeV, 5 kA electron accelerator has been constructed at the Lawrence Livermore National Laboratory (LLNL) to demonstrate these concepts and to provide a test facility for high brightness sources. The pulse drive for the accelerator is based on state-of-the-art magnetic pulse compressors with very high peak power capability, repetition rates exceeding a kilohertz and excellent reliability

Technology of magnetically driven accelerators

International Nuclear Information System (INIS)

Birx, D.L.; Hawkins, S.A.; Poor, S.E.; Reginato, L.L.; Smith, M.W.

1985-01-01

The marriage of Induction Linac technology with Nonlinear Magnetic Modulators has produced some unique capabilities. It appears possible to produce electron beams with average currents measured in amperes, at gradients exceeding 1 MeV/meter, and with power efficiencies approach 50%. A 2 MeV, 5 kA electron accelerator has been constructed at the Lawrence Livermore National Laboratory (LLNL) to demonstrate these concepts and to provide a test facility for high brightness sources. The pulse drive for the accelerator is based on state-of-the-art magnetic pulse compressors with very high peak power capability, repetition rates exceeding a kilohertz and excellent reliability

Analyses Made to Order: Using Transformation to Rapidly Configure a Multidisciplinary Environment

Science.gov (United States)

Cole, Bjorn

2013-01-01

Aerospace problems are highly multidisciplinary. Four or more major disciplines are involved in analyzing any particular vehicle. Moreover, the choice of implementation technology of various subsystems can lead to a change of leading domain or reformation of the driving equations. An excellent example is the change of expertise required to consider aircraft built from composite or metallic structures, or those propelled by chemical or electrical thrusters. Another example is in the major reconfiguration of handling and stability equations with different control surface configuration (e.g., canards, t-tail v four-post tail). Combinatorial problems are also commonplace anytime that a major system is to be designed. If there are only 5 attributes of a design to consider with 4 different options, this is already 1024 options. Adding just 5 more dimensions to the study explodes the space to over one million. Even generous assumptions like the idea that only 10% of the combinations are physically feasible can only contain the problem for so long. To make matters worse, the simple number of combinations is only the beginning. Combining the issue of trade space size with the need to reformulate the design problem for many of the possibilities makes life exponentially more difficult. Advances in software modeling approaches have led to the development of model-driven architecture. This approach uses the transformation of models into inferred models (e.g. inferred execution traces from state machines) or the skeletons for code generation. When the emphasis on transformation is applied to aerospace, it becomes possible to exploit redundancy in the information specified in multiple domain models into a unified system model. F1urther, it becomes possible to overcome the combinatorial nature of specifying integrated system behavior by manually combining the equations governing a given component technology. Transformations from a system specification combined with a system

Linear or Rotary Actuator Using Electromagnetic Driven Hammer as Prime Mover

Science.gov (United States)

Paine, Jeffrey S. N. (Inventor); Smith, Byron F. (Inventor); Sesler, Joshua J. (Inventor); Paine, Matthew T. (Inventor); McMahan, Bert K. (Inventor); McMahan, Mark C. (Inventor)

2018-01-01

We claim a hammer driven actuator that uses the fast-motion, low-force characteristics of an electro-magnetic or similar prime mover to develop kinetic energy that can be transformed via a friction interface to produce a higher-force, lower-speed linear or rotary actuator by using a hammering process to produce a series of individual steps. Such a system can be implemented using a voice-coil, electro-mechanical solenoid or similar prime mover. Where a typical actuator provides limited range of motion or low force, the range of motion of a linear or rotary impact driven motor can be configured to provide large displacements which are not limited by the characteristic dimensions of the prime mover.

Data-driven Regulation and Governance in Smart Cities

NARCIS (Netherlands)

Ranchordás, Sofia; Klop, Abram; Mak, Vanessa; Berlee, Anna; Tjong Tjin Tai, Eric

2018-01-01

This chapter discusses the concept of data-driven regulation and governance in the context of smart cities by describing how these urban centres harness these technologies to collect and process information about citizens, traffic, urban planning or waste production. It describes how several smart

The Exploration of Design Driven Innovation as a Dynamic Capability

Directory of Open Access Journals (Sweden)

Philips Kembaren

2012-01-01

Full Text Available Innovation enables companies to attain consistent organic growth that brings benefits to stakeholders. Designthinking approach in innovation has been emergent to be an alternative to technological development path inorder to generate competitive and successful product or service in the market place. Design driven innovationcombines functional and semantic dimensions of products or services in the marketplace. Previous researchhas recently revealed practices of design driven innovation in various industries. However, little is known tothe extent that companies in Indonesia practicing design driven innovation. A theoretical framework withperspective from dynamic capability theoretical lens and guided by Dubin’s theory building methodology isproposed to explain the constructs and role of design in the process of innovation. The research is expected tocontribute a new construct to the existing framework, namely construct that related to how we could assessthe value of the design-driven innovation output, perceived by the costumers.Keywords: design driven innovation, dynamic capabilities, theory building

A Knowledge-Driven Geospatially Enabled Framework for Geological Big Data

Directory of Open Access Journals (Sweden)

Liang Wu

2017-06-01

Full Text Available Geologic survey procedures accumulate large volumes of structured and unstructured data. Fully exploiting the knowledge and information that are included in geological big data and improving the accessibility of large volumes of data are important endeavors. In this paper, which is based on the architecture of the geological survey information cloud-computing platform (GSICCP and big-data-related technologies, we split geologic unstructured data into fragments and extract multi-dimensional features via geological domain ontology. These fragments are reorganized into a NoSQL (Not Only SQL database, and then associations between the fragments are added. A specific class of geological questions was analyzed and transformed into workflow tasks according to the predefined rules and associations between fragments to identify spatial information and unstructured content. We establish a knowledge-driven geologic survey information smart-service platform (GSISSP based on previous work, and we detail a study case for our research. The study case shows that all the content that has known relationships or semantic associations can be mined with the assistance of multiple ontologies, thereby improving the accuracy and comprehensiveness of geological information discovery.

Photonics technology and university-driven business co-creation

Science.gov (United States)

Erland Østergaard, J.; Tanev, S.; Bue Andersen, T.; Bozhevolnyi, S. I.

2012-03-01

TEK-Momentum is the Business Innovation and Technology Department in the Faculty of Engineering at the University of Southern Denmark in Odense. Since its establishment in 2010 the Department has adopted an exploratory technology transfer, open business development and co-creation strategy that goes beyond traditional technology transfer activities. This is an emerging strategy that has been shaped for the last 5 years even before the formal establishment of TEKMomentum. It emerged out of multiple dialog-based interactions with small- and medium-sized companies by focusing on matching real life problems with potential problem solvers. The main priority of such strategy is maximizing the value of the potential contributions from the multiple stakeholders and not on the technology development issues per se. In this paper we will present an overview of TEK-Momentum's approach by using as case studies two recent successful projects. The first one focuses on the commercialization of an LED illumination system. The second one focuses on the commercialization of an optical ring resonator-based temperature sensor.

Simulation of electrically driven jet using Chebyshev collocation method

Institute of Scientific and Technical Information of China (English)

无

2011-01-01

The model of electrically driven jet is governed by a series of quasi 1D dimensionless partial differential equations(PDEs).Following the method of lines,the Chebyshev collocation method is employed to discretize the PDEs and obtain a system of differential-algebraic equations(DAEs).By differentiating constrains in DAEs twice,the system is transformed into a set of ordinary differential equations(ODEs) with invariants.Then the implicit differential equations solver "ddaskr" is used to solve the ODEs and ...

Heat capacity anomalies associated with structural transformations in. beta. -W and perovskite compounds

Energy Technology Data Exchange (ETDEWEB)

Viswanathan, R [Brookhaven National Lab., Upton, NY; Ho, J C

1977-01-01

The similarity of the heat capacity anomalies, often observed with structural transformations driven by soft phonons, in both ..beta..-W and perovskite compounds is discussed referring to our recent work on V/sub 3/Si and RbCaF/sub 3/.

New Perspectives in HTS Transformer Design

Energy Technology Data Exchange (ETDEWEB)

Ariante, M [C.R.I.S, via Nuova delle Brecce 260, Naples (Italy); Formisano, A [D.I.I., Seconda Universita di Napoli, Aversa (CE) (Italy); Marignetti, F [D.A.E.I.M.I., Universita di Cassino, Cassino (France) (Italy); Martone, R [D.I.I., Seconda Universita di Napoli, Aversa (CE) (Italy); Masullo, G [C.R.I.S, via Nuova delle Brecce 260, Naples (Italy); Matrone, A [C.R.I.S, via Nuova delle Brecce 260, Naples (Italy); Quarantiello, R [C.R.I.S, via Nuova delle Brecce 260, Naples (Italy); Rubinacci, G [D.I.E, Universita di Napoli Federico II, Naples (Italy); Sangiorgi, F [GETRA S.p.A., Marcianise (CE) (Italy); Scarano, M [D.A.E.I.M.I., Universita di Cassino, Cassino (France), Italy; Silvestri, S [GETRA S.p.A., Marcianise (CE) (Italy); Villone, F [D.A.E.I.M.I., Universita di Cassino, Cassino (France), (taly); Zigon, M [GETRA S.p.A., Marcianise (CE) (Italy)

2006-06-01

Power transformers based on High Temperature Superconductors (HTS) technology are an appealing promise for several practical applications. The present designs still leave wide margins of possible improvement in terms of both layout optimisation and introduction of new technologies. In the framework of a technical-scientific cooperation among scientific and industrial subjects, a 10 kVA single-phase transformer was designed and manufactured, using copper for primary windings and BSCCO-2223 HTS tape for secondary windings. The layout has been optimized taking into account the particular characteristics of BSCCO tapes, in particular their AC losses, and the usual figures (stray flux, Joule and iron losses, weight and overall footprint) considered in transformers design. The prototype has then been realized and characterized, using general as well as specific tests. The performance of the device has been evaluated and compared with numerical calculation. In the paper, an overview of the device design and manufacturing will be presented, together with a critical comparison between computed and measured performance.

Transient plant transformation mediated by Agrobacterium tumefaciens: Principles, methods and applications.

Science.gov (United States)

Krenek, Pavel; Samajova, Olga; Luptovciak, Ivan; Doskocilova, Anna; Komis, George; Samaj, Jozef

2015-11-01

Agrobacterium tumefaciens is widely used as a versatile tool for development of stably transformed model plants and crops. However, the development of Agrobacterium based transient plant transformation methods attracted substantial attention in recent years. Transient transformation methods offer several applications advancing stable transformations such as rapid and scalable recombinant protein production and in planta functional genomics studies. Herein, we highlight Agrobacterium and plant genetics factors affecting transfer of T-DNA from Agrobacterium into the plant cell nucleus and subsequent transient transgene expression. We also review recent methods concerning Agrobacterium mediated transient transformation of model plants and crops and outline key physical, physiological and genetic factors leading to their successful establishment. Of interest are especially Agrobacterium based reverse genetics studies in economically important crops relying on use of RNA interference (RNAi) or virus-induced gene silencing (VIGS) technology. The applications of Agrobacterium based transient plant transformation technology in biotech industry are presented in thorough detail. These involve production of recombinant proteins (plantibodies, vaccines and therapeutics) and effectoromics-assisted breeding of late blight resistance in potato. In addition, we also discuss biotechnological potential of recombinant GFP technology and present own examples of successful Agrobacterium mediated transient plant transformations. Copyright © 2015 Elsevier Inc. All rights reserved.

GLOBAL GALACTIC DYNAMO DRIVEN BY COSMIC RAYS AND EXPLODING MAGNETIZED STARS

International Nuclear Information System (INIS)

Hanasz, Michal; Woltanski, Dominik; Kowalik, Kacper

2009-01-01

We report the first results of the first global galactic-scale cosmic ray (CR)-MHD simulations of CR-driven dynamo. We investigate the dynamics of magnetized interstellar medium (ISM), which is dynamically coupled with CR gas. We assume that exploding stars deposit small-scale, randomly oriented, dipolar magnetic fields into the differentially rotating ISM, together with a portion of CRs, accelerated in supernova shocks. We conduct numerical simulations with the aid of a new parallel MHD code PIERNIK. We find that the initial magnetization of galactic disks by exploding magnetized stars forms favorable conditions for the CR-driven dynamo. We demonstrate that dipolar magnetic fields supplied on small supernova remnant scales can be amplified exponentially by the CR-driven dynamo, to the present equipartition values, and transformed simultaneously to large galactic scales. The resulting magnetic field structure in an evolved galaxy appears spiral in the face-on view and reveals the so-called X-shaped structure in the edge-on view.

Driven Quantum Dynamics: Will It Blend?

Directory of Open Access Journals (Sweden)

Leonardo Banchi

2017-10-01

Full Text Available Randomness is an essential tool in many disciplines of modern sciences, such as cryptography, black hole physics, random matrix theory, and Monte Carlo sampling. In quantum systems, random operations can be obtained via random circuits thanks to so-called q-designs and play a central role in condensed-matter physics and in the fast scrambling conjecture for black holes. Here, we consider a more physically motivated way of generating random evolutions by exploiting the many-body dynamics of a quantum system driven with stochastic external pulses. We combine techniques from quantum control, open quantum systems, and exactly solvable models (via the Bethe ansatz to generate Haar-uniform random operations in driven many-body systems. We show that any fully controllable system converges to a unitary q-design in the long-time limit. Moreover, we study the convergence time of a driven spin chain by mapping its random evolution into a semigroup with an integrable Liouvillian and finding its gap. Remarkably, we find via Bethe-ansatz techniques that the gap is independent of q. We use mean-field techniques to argue that this property may be typical for other controllable systems, although we explicitly construct counterexamples via symmetry-breaking arguments to show that this is not always the case. Our findings open up new physical methods to transform classical randomness into quantum randomness, via a combination of quantum many-body dynamics and random driving.

Continental transform margins : state of art and future milestones

Science.gov (United States)

Basile, Christophe

2010-05-01

Transform faults were defined 45 years ago as ‘a new class of fault' (Wilson, 1965), and transform margins were consequently individualized as a new class of continental margins. While transform margins represent 20 to 25 % of the total length of continent-ocean transitions, they were poorly studied, especially when compared with the amount of data, interpretations, models and conceptual progress accumulated on divergent or convergent continental margins. The best studied examples of transform margins are located in the northern part of Norway, south of South Africa, in the gulf of California and on both sides of the Equatorial Atlantic. Here is located the Côte d'Ivoire - Ghana margin, where the more complete data set was acquired, based on numerous geological and geophysical cruises, including ODP Leg 159. The first models that encompassed the structure and evolution of transform margins were mainly driven by plate kinematic reconstructions, and evidenced the diachronic end of tectonic activity and the non-cylindrical character of these margins, with a decreasing strike-slip deformation from the convex to the concave divergent-transform intersections. Further thermo-mechanical models were more specifically designed to explain the vertical displacements along transform margins, and especially the occurrence of high-standing marginal ridges. These thermo-mechanical models involved either heat transfer from oceanic to continental lithospheres across the transform faults or tectonically- or gravity-driven mass transfer in the upper crust. These models were far from fully fit observations, and were frequently dedicated to specific example, and not easily generalizable. Future work on transform continental margins may be expected to fill some scientific gaps, and the definition of working directions can benefit from the studies dedicated to other types of margins. At regional scale the structural and sedimentological variability of transform continental margins has

A compact broadband nonsynchronous noncommensurate impedance transformer

DEFF Research Database (Denmark)

Zhurbenko, Vitaliy; Kim, Kseniya; Narenda, Kumar

2012-01-01

Nonsynchronous noncommensurate impedance transformers consist of a combination of high‐ and low‐impedance transmission lines. High‐impedance lines have narrow tracks in strip and microstrip technology, which allows for high flexibility and miniaturization of the layout in comparison...... to the traditional tapered line transformers. This flexibility of the broadband nonsynchronous noncommensurate impedance transformers is experimentally demonstrated in this article allowing the length reduction by almost three times. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:1832–1835, 2012; View...

User Driven Innovation in the Building Process

DEFF Research Database (Denmark)

Christiansson, Per; Sørensen, Kristian Birch; Rødtness, Mette

2008-01-01

During the late years there has been an ever-increasing focus on the possibilities to change the building process to raise quality on the final building products as well as the activities of actors involved in the building process. One reason for this interest is the new opportunities evolving du...... building design. A general methodological framework and meta ontology for Virtual Innovation in Construction is presented as well as findings from implementation of the method....... to introduction of advanced information and communication technology (ICT). The paper focuses on creative changes of the building process powered by user driven innovation activities. An overview of existing user driven innovation methodologies is given as well experiences from the ongoing Virtual Innovation...

Transformation of the fourth power block of the Chernobyl atomic power station into a ecologically safe system by a dock-caisson technological complex

International Nuclear Information System (INIS)

Konyukhov, S.N.; Kokulin, Eh.M.; Kozin, S.Ya.; Kurinnoj, V.N.

1999-01-01

The designers of the technical solution do not doubt that it is possible to transform the fourth power block of the Chernobyl APS into an ecologically safe system by help of Dock-Caisson technological complex. Application of the Dock-Caisson allows to make the operations of phases 1 and 2 of the Shelter installation transformation at the same time, i.e. to make the installation stabilization and preparation to radioactive wastes extraction simultaneously. By completion of first two phases the conditions are created for instant beginning of phase 3, i.e. disassembling of the content of the crashed power block

The Ed Tech Journey and a Future Driven by Disruptive Change

Science.gov (United States)

Grush, Mary, Ed.

2010-01-01

In this article, the author talks about the education technology journey and a future driven by disruptive change. The author first provides a definition of disruptive change. To understand the potential for disruptive change in higher education--a disruption fueled by technology and related trends--the author begins with a look at the past and…

Service and Data Driven Multi Business Model Platform in a World of Persuasive Technologies

DEFF Research Database (Denmark)

Andersen, Troels Christian; Bjerrum, Torben Cæsar Bisgaard

2016-01-01

companies in establishing a service organization that delivers, creates and captures value through service and data driven business models by utilizing their network, resources and customers and/or users. Furthermore, based on literature and collaboration with the case company, the suggestion of a new...... framework provides the necessary construction of how the manufac- turing companies can evolve their current business to provide multi service and data driven business models, using the same resources, networks and customers....

? filtering for stochastic systems driven by Poisson processes

Science.gov (United States)

Song, Bo; Wu, Zheng-Guang; Park, Ju H.; Shi, Guodong; Zhang, Ya

2015-01-01

This paper investigates the ? filtering problem for stochastic systems driven by Poisson processes. By utilising the martingale theory such as the predictable projection operator and the dual predictable projection operator, this paper transforms the expectation of stochastic integral with respect to the Poisson process into the expectation of Lebesgue integral. Then, based on this, this paper designs an ? filter such that the filtering error system is mean-square asymptotically stable and satisfies a prescribed ? performance level. Finally, a simulation example is given to illustrate the effectiveness of the proposed filtering scheme.

Ashing vs. electric generation in accelerator driven system

International Nuclear Information System (INIS)

Solanilla, Roberto B.

1999-01-01

Accelerator Driven Systems have been conceived as an alternative for the processing of the radioactive wastes contained in spent fuel elements from nuclear power plants. These systems are formed by the coupling of a nuclear reactor - preferably a subcritical reactor - with a particle accelerator providing particles with energy in the order of the GeV. The long-lived fission products and actinides of the spent fuels are transformed by nuclear reactions in stable isotopes or in short-lived radioisotopes. The basic parameters for the electric energy production of the different systems are analysed. (author)

Robot, Eye, and ROI: Technology Transformation Versus Technology Transfer

OpenAIRE

Sacerdoti, Earl

1985-01-01

I want to discuss two aspects of technology transfer. First I've been asked to present a brief perspective on how AI is fitting into a particular application area: Industrial automation. Then I want to give my two cents worth on AI as a business activity.

Player Transformation of Educational Multiplayer Games

DEFF Research Database (Denmark)

Magnussen, Rikke; Misfeldt, Morten

2004-01-01

transformed the game to accommodate social interaction. With these transformed ways of playing the game, they managed to get to the top of the high score list while avoiding the educational parts of the game. Players transforming educational games to escape learning elements can be a problem when these games...... are used for formal education. In this paper we argue that player transformation of educational games can, however, be the basis of exciting and unconventional learning of valuable things, such as how to transform information technology to better accommodate social interaction.......Children's great interest in multiplayer games has led to attempts to design educational multiplayer games. In this study, we have studied a test of an educational multiplayer game designed for mathematics education for children aged nine to twelve. In our observations, it became clear that pupils...

Transforming Health Care Service Delivery and Provider Selection

OpenAIRE

Reiner, Bruce I.

2011-01-01

Commoditization pressures in medicine have risked transforming service provider selection from “survival of the fittest” to “survival of the cheapest.” Quality- and safety-oriented mandates by the Institute of Medicine have led to the creation of a number of data-driven quality-centric initiatives including Pay for Performance and Evidence-Based Medicine. A synergistic approach to creating quantitative accountability in medical service delivery is through the creation of consumer-oriented per...

Managing Technology Resourcefully: Part I--Technology and Instruction

Science.gov (United States)

Weeks, Richard

2009-01-01

The transformative powers of digital technology to improve student learning and the resulting effect of that technology to make the business of education more cost-effective are two of the more exciting dynamics in schooling today. Before the current school year ends, new products and upgrades will be available to replace much of the technology.…

Development of 66 kV/6.9 kV 2 MV A prototype HTS power transformer

International Nuclear Information System (INIS)

Bohno, T.; Tomioka, A.; Imaizumi, M.; Sanuki, Y.; Yamamoto, T.; Yasukawa, Y.; Ono, H.; Yagi, Y.; Iwadate, K.

2005-01-01

We have developed the technology of the producing a HTS magnet for the power transformer. Three subjects have been mainly studied, high voltage technologies, large current and low AC loss technologies and sub-cooling system technologies to establish the technology of 66 kV/6.9 kV 10 MV A class HTS power transformer. In order to verify the validity of elemental technologies, such as high voltage technologies, large current and low AC loss technologies and sub-cooling system technologies, single-phase 2 MV A class 66 kV/6.9 kV prototype HTS transformer was manufactured and tested. In the load loss (AC loss) measurement, it was obtained that the measured value of 633 W was almost corresponding to the calculated value of 576 W at the rated operation of 2 MV A. Moreover, the breakdown was not found all voltage withstand test. These test results indicate that elemental technologies were established for the development of 66 kV/6.9 kV 10 MV A class HTS power transformer

International conference on sub-critical accelerator driven systems. Proceedings

International Nuclear Information System (INIS)

Litovkina, L.P.; Titarenko, Yu.E.

1999-01-01

The International Meeting on Sub-Critical Accelerator Driven Systems was organized by the State Scientific Center - Institute for Theoretical and Experimental Physics with participation of Atomic Ministry of RF. The Meeting objective was to analyze the recent achievements and tendencies of the accelerator-driven systems development. The Meeting program covers a broad range of problems including the accelerator-driven systems (ADS) conceptual design; analyzing the ADS role in nuclear fuel cycle; accuracy of modeling the main parameters of ADS; conceptual design of high-current accelerators. Moreover, the results of recent experimental and theoretical studies on nuclear data accumulation to support the ADS technologies are presented. About 70 scientists from the main scientific centers of Russia, as well as scientists from USA, France, Belgium, India, and Yugoslavia, attended the meeting and presented 44 works [ru

How to Incorporate Technology with Inquiry-Based Learning to Enhance the Understanding of Chemical Composition; How to Analyze Unknown Samples

Directory of Open Access Journals (Sweden)

Suzanne Lunsford

2017-02-01

Full Text Available The use of technology in teaching offers numerous amounts of possibilities and can be challenging for physics, chemistry and geology content courses. When incorporating technology into a science content lab it is better to be driven by pedagogy than by technology in an inquiry-based lab setting. Students need to be introduced to real-world technology in the beginning of first year chemistry or physics course to ensure real-world technology concepts while assisting with content such as periodic trends on the periodic table. This article will describe the use of technology with Raman Spectroscopy and Energy Dispersive XRay Spectroscopy (EDS and Fourier Transform Infrared Spectroscopy (FTIR to research chemical compositions in the real world of unknown samples. Such unknown samples utilized in this lab were clamshell (parts of clams that look like shark teeth versus shark teeth. The data will be shared to show how the students (pre-service teachers and in-service teachers solved the problem using technology while learning important content that will assist in the next level of chemistry, physics and even geology.

Stable operation of a high-power piezoelectric transformer comprising two identical bolt-clamped Langevin-type transducers and a stepped horn

Science.gov (United States)

Adachi, Kazunari; Suzuki, Kohei; Shibamata, Yuki

2018-06-01

We previously developed a 100 W piezoelectric transformer comprising two identical bolt-clamped Langevin-type transducers (BLTs) and a stepped horn whose cross-sectional area ratio determines the specified step-up voltage transformation ratio. Unlike conventional piezoelectric transformers, this transformer is driven at a frequency quite near its mechanical resonance, and thus can be mechanically held firmly at its clearly identified vibratory node without mechanical energy loss. However, it has been revealed that the high-power operation of the transformer often becomes very unstable owing to the “jumping and dropping” phenomena first found by Takahashi and Hirose [Jpn. J. Appl. Phys. 31, 3055 (1992)]. To avoid this instability, we have investigated the peculiar phenomena, and found that they can be attributed to a heavily distorted electric field inside the piezoelectric ceramic disks of the BLT on the primary side of the transformer being driven by a low-impedance voltage source near the mechanical resonance. The resultant concentration of the electric field leads to the local reversal of piezoelectric polarization in every half period of the vibration, viz., the instability. Consequently, we have developed a scheme for the steady high-power operation of this type of piezoelectric transformer and examined its validity experimentally. The method has eventually improved the linearity and power transfer efficiency of the transformer significantly.

Laser-driven particle acceleration towards radiobiology and medicine

CERN Document Server

2016-01-01

This book deals with the new method of laser-driven acceleration for application to radiation biophysics and medicine. It provides multidisciplinary contributions from world leading scientist in order to assess the state of the art of innovative tools for radiation biology research and medical applications of ionizing radiation. The book contains insightful contributions on highly topical aspects of spatio-temporal radiation biophysics, evolving over several orders of magnitude, typically from femtosecond and sub-micrometer scales. Particular attention is devoted to the emerging technology of laser-driven particle accelerators and their applicatio to spatio-temporal radiation biology and medical physics, customization of non-conventional and selective radiotherapy and optimized radioprotection protocols.

The Atiri Concept for Scaling up Demand-Driven Technologies: The Experience from its Application by Dairy Goat Farmers in Embu

International Nuclear Information System (INIS)

Kiruiru, E.M.

2002-01-01

Agriculture production on smallholder farms of Kenya has continued to decline despite years of agriculture research by the Kenya Agricultural Research Institute (KARI). Farmers to access agricultural technologies resulting from poor coverage mainly attributed this to a low ability by regular extension and use of inappropriate mechanisms for transferring proven technologies. The evolvement of the Agricultural Technology and Information Response Initiative (ATIRI) in KARI in 2002 was aimed at catalyzing delivery of Impact- oriented agricultural technologies to the beneficiaries at grass-root levels on a demand-driven basis. The basic hypothesis was that both the demand for technologies and their adoption would be enhanced. The Manyatta Dairy Goat-keeping Self-help Group (MDGSG) in Embu was among the initial community-based organization (CBO) facilitated within the framework of ATIRI concept to acquire various technologies aimed at improving dairy goat productivity. Following the demand for suitable forages, the scale of planting as well as skills and knowledge of forage utilization practices significantly increased after 1.5 years. In particular, fodder trees (Calliandra calothyrsus and Leucaena trichandra) and dual-purpose sweet potato recorded the highest expansion of 500 and 1300% respectively. The mean daily milk yield per head recorded in 1996 was 0.8 compared to 2.5 lt. by 2002. The relative number of goats per household in 2002 (5.7 heads) was also significantly higher than the one recorded in 1996 (1.5 heads). These changes were generally attributed to improve feeding especially from the period 2000 when the ATIRI activities started resulting in faster growth rate and improved reproductive efficiency. The major indication to adoption of technologies is the opportunity it created for farmers to increase cash income from either sale of animals or manure. The approach to involve farmers has shown tremendous potential for scaling up technology transfer since over

Housing First and Photovoice: Transforming Lives, Communities, and Systems

Science.gov (United States)

Barile, John P.; Ogawa, Terry Yasuko; Peralta, Nelson; Bugg, Reumell; Lau, John; Lamberton, Thomas; Hall, Corazon; Mori, Victor

2018-01-01

This article presents findings from a community-based participatory evaluation of a Housing First program on the Island of O’ahu. In this study, clients in a Housing First program used Photovoice to evaluate the program and to advocate for progressive housing policies. Written together by members of the Housing First Photovoice group, this collaborative article describes the outcomes from both the Housing First program and the Photovoice project and demonstrates the ways in which participatory program evaluations can interact with client-driven programs like Housing First to produce a cumulative, transformative impact. Findings suggest that community psychologists hoping to re-engage with community mental health systems through enacting transformative change should consider taking a community-based participatory approach to program evaluation because increased client voice in community mental health programs and their evaluations can have far-reaching, transformative impacts for research, practice, and policy. PMID:29323410

Method for Transformation of Weakly Magnetic Minerals (Hematite, Goethite into Strongly Magnetic Mineral (Magnetite to Improve the Efficiency of Technologies for Oxidized Iron Ores Benefication

Directory of Open Access Journals (Sweden)

Ponomarenko, O.

2015-03-01

Full Text Available A new method for relatively simple transformation of weakly magnetic minerals (goethite (α-FeOOH and hematite (α-Fe2O3 into strongly magnetic mineral (magnetite (Fe3O4 was developed. It was shown, that transformation of structure and magnetic characteristics of go ethite and hematite are realized in the presence of starch at relatively low temperatures (in the range of 300—600 °С. Obtained results open up new possibilities for development of effective technologies for oxidized iron ore beneficiation.

Shaping the output pulse of a linear-transformer-driver module

International Nuclear Information System (INIS)

Long, Finis W.; McKee, G. Randall; Stoltzfus, Brian Scott; Woodworth, Joseph Ray; McKenney, John Lee; Fowler, William E.; Mazarakis, Michael Gerrassimos; Porter, John L.; Stygar, William A.; Savage, Mark Edward; LeChien, Keith R.; Van De Valde, David M.

2008-01-01

We demonstrate that a wide variety of current-pulse shapes can be generated using a linear-transformer-driver (LTD) module that drives an internal water-insulated transmission line. The shapes are produced by varying the timing and initial charge voltage of each of the module's cavities. The LTD-driven accelerator architecture outlined in (Phys. Rev. ST Accel. Beams 10, 030401 (2007)) provides additional pulse-shaping flexibility by allowing the modules that drive the accelerator to be triggered at different times. The module output pulses would be combined and symmetrized by water-insulated radial-transmission-line impedance transformers (Phys. Rev. ST Accel. Beams 11, 030401 (2008))

Technology Driven Organizational Structure of the Firm

NARCIS (Netherlands)

van den Brink, J.R.; Ruys, P.H.M.

2008-01-01

We model a corporate firm with a variable internal organizational structure that adapts to various degrees of technological cooperation. The entrepreneur determines the organizational structure that maximizes profits under participation constraints. Wages are determined by an internal cooperative

Integrating Information & Communications Technologies into the Classroom

Science.gov (United States)

Tomei, Lawrence, Ed.

2007-01-01

"Integrating Information & Communications Technologies Into the Classroom" examines topics critical to business, computer science, and information technology education, such as: school improvement and reform, standards-based technology education programs, data-driven decision making, and strategic technology education planning. This book also…

Technological innovation and convergent journalism. Case study on the transformation process of Bavaria’s public broadcasting service

Directory of Open Access Journals (Sweden)

Klaus MEIER

2017-01-01

Full Text Available As a consequence of technological innovations and their social utilisation, media organisations and newsrooms are undergoing a fundamental transformation process. This article analyses the interrelations between technological innovations and the challenges of convergent journalism. Studies conducted on newsroom convergence to date set out from one-sided influences: They investigated the extent to which technical innovations determine the newsrooms, or whether journalistic structures and long-range trends are so strong as to largely obstruct the adoption of new technologies in journalism. Therefore technology — especially in studies carried out on newsroom convergence — is considered as an influencing factor on somehow resisting or non-resisting newsrooms. We broaden the scope of this investigation by considering that any such influence might not come exclusively from technology, but that impulses can come also from innovative newsrooms: technological gaps, wishes and obstacles are identified from the journalist's viewpoint and brought to the attention of the developers of newsroom technologies — on the basis of empirical research findings from a case study of Bavaria’s public broadcasting service, Bayerischer Rundfunk (BR. With its 5.000 employees, BR is one of Germany's largest media organisations. It is undergoing a fundamental and long-term convergence process. A variety of gaps, problems and wishes came to light from 25 in-depth interviews with journalists working on innovative projects. For example, criticism is expressed of complicated, partly unknown or non-existent networking of cross-media production systems. There is a desire for the increased use of consumer devices like smartphones in professional news production. There exists a creative potential for innovative solutions, but these are not comprehensively evaluated. To date, there has been no systematic implementation of the findings of innovative media projects in everyday

76 FR 63941 - Agency Information Collection Activities: Business Transformation-Automated Integrated Operating...

Science.gov (United States)

2011-10-14

... Activities: Business Transformation--Automated Integrated Operating Environment (IOE), New Information... Internet by federal agencies through efforts like USCIS' Business Transformation initiative. The USCIS ELIS... the USCIS Business Transformation initiative and wizard technology. The supporting statement can be...

Technology or Process First?

DEFF Research Database (Denmark)

Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

Enterprise Systems Management (ESM) and Business Pro- cess Management (BPM), although highly correlated, have evolved as alternative and mutually exclusive approaches to corporate infrastruc- ture. As a result, companies struggle to nd the right balance between technology and process factors...... in infrastructure implementation projects. The purpose of this paper is articulate a need and a direction to medi- ate between the process-driven and the technology-driven approaches. Using a cross-case analysis, we gain insight into two examples of sys- tems and process implementation. We highlight the dierences...... between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...

Current status on research and development of accelerator-driven system and nuclear transmutation technology in Asian countries

International Nuclear Information System (INIS)

Pyeon, Cheol Ho

2013-01-01

This status report describes the current status on research and development (R and D) of accelerator-driven system (ADS) and nuclear transmutation techniques (NTT), including nuclear data, accelerator techniques, Pb-Bi target, fuel technologies and reactor physics, in East Asian countries: Japan, Korea and China. The report also includes all presentation materials presented in 'the 10th International Workshop on Asian Network for ADS and NTT (ADS+NTT 2012)' held at the Kyoto University Research Reactor Institute, Osaka, Japan on 6th and 7th December, 2012. The objective of this workshop is to make actual progress of ADS R and D especially in East Asian countries, as well as in European countries, through sharing mutual interests and conducting the information exchange each other. The 5 of 27 papers presented at the entitled report and meeting are indexed individually. (J.P.N.)

Challenges for Social-Ecological Transformations: Contributions from Social and Political Ecology

Directory of Open Access Journals (Sweden)

Christoph Görg

2017-06-01

Full Text Available Transformation has become a major topic of sustainability research. This opens up new perspectives, but at the same time, runs the danger to convert into a new critical orthodoxy which narrows down analytical perspectives. Most research is committed towards a political-strategic approach towards transformation. This focus, however, clashes with ongoing transformation processes towards un-sustainability. The paper presents cornerstones of an integrative approach to social-ecological transformations (SET, which builds upon empirical work and conceptual considerations from Social Ecology and Political Ecology. We argue that a critical understanding of the challenges for societal transformations can be advanced by focusing on the interdependencies between societies and the natural environment. This starting point provides a more realistic understanding of the societal and biophysical constraints of sustainability transformations by emphasising the crisis-driven and contested character of the appropriation of nature and the power relations involved. Moreover, it pursues a transdisciplinary mode of research, decisive for adequately understanding any strategy for transformations towards sustainability. Such a conceptual approach of SET is supposed to better integrate the analytical, normative and political-strategic dimension of transformation research. We use the examples of global land use patterns, neo-extractivism in Latin America and the global water crisis to clarify our approach.

A new method of converter transformer protection without commutation failure

Science.gov (United States)

Zhang, Jiayu; Kong, Bo; Liu, Mingchang; Zhang, Jun; Guo, Jianhong; Jing, Xu

2018-01-01

With the development of AC / DC hybrid transmission technology, converter transformer as nodes of AC and DC conversion of HVDC transmission technology, its reliable safe and stable operation plays an important role in the DC transmission. As a common problem of DC transmission, commutation failure poses a serious threat to the safe and stable operation of power grid. According to the commutation relation between the AC bus voltage of converter station and the output DC voltage of converter, the generalized transformation ratio is defined, and a new method of converter transformer protection based on generalized transformation ratio is put forward. The method uses generalized ratio to realize the on-line monitoring of the fault or abnormal commutation components, and the use of valve side of converter transformer bushing CT current characteristics of converter transformer fault accurately, and is not influenced by the presence of commutation failure. Through the fault analysis and EMTDC/PSCAD simulation, the protection can be operated correctly under the condition of various faults of the converter.

Transformation as a Design Process and Runtime Architecture for High Integrity Software

Energy Technology Data Exchange (ETDEWEB)

Bespalko, S.J.; Winter, V.L.

1999-04-05

We have discussed two aspects of creating high integrity software that greatly benefit from the availability of transformation technology, which in this case is manifest by the requirement for a sophisticated backtracking parser. First, because of the potential for correctly manipulating programs via small changes, an automated non-procedural transformation system can be a valuable tool for constructing high assurance software. Second, modeling the processing of translating data into information as a, perhaps, context-dependent grammar leads to an efficient, compact implementation. From a practical perspective, the transformation process should begin in the domain language in which a problem is initially expressed. Thus in order for a transformation system to be practical it must be flexible with respect to domain-specific languages. We have argued that transformation applied to specification results in a highly reliable system. We also attempted to briefly demonstrate that transformation technology applied to the runtime environment will result in a safe and secure system. We thus believe that the sophisticated multi-lookahead backtracking parsing technology is central to the task of being in a position to demonstrate the existence of HIS.

Resource Recovery from Wastewater by Biological Technologies: Opportunities, Challenges, and Prospects

Science.gov (United States)

Puyol, Daniel; Batstone, Damien J.; Hülsen, Tim; Astals, Sergi; Peces, Miriam; Krömer, Jens O.

2017-01-01

Limits in resource availability are driving a change in current societal production systems, changing the focus from residues treatment, such as wastewater treatment, toward resource recovery. Biotechnological processes offer an economic and versatile way to concentrate and transform resources from waste/wastewater into valuable products, which is a prerequisite for the technological development of a cradle-to-cradle bio-based economy. This review identifies emerging technologies that enable resource recovery across the wastewater treatment cycle. As such, bioenergy in the form of biohydrogen (by photo and dark fermentation processes) and biogas (during anaerobic digestion processes) have been classic targets, whereby, direct transformation of lipidic biomass into biodiesel also gained attention. This concept is similar to previous biofuel concepts, but more sustainable, as third generation biofuels and other resources can be produced from waste biomass. The production of high value biopolymers (e.g., for bioplastics manufacturing) from organic acids, hydrogen, and methane is another option for carbon recovery. The recovery of carbon and nutrients can be achieved by organic fertilizer production, or single cell protein generation (depending on the source) which may be utilized as feed, feed additives, next generation fertilizers, or even as probiotics. Additionlly, chemical oxidation-reduction and bioelectrochemical systems can recover inorganics or synthesize organic products beyond the natural microbial metabolism. Anticipating the next generation of wastewater treatment plants driven by biological recovery technologies, this review is focused on the generation and re-synthesis of energetic resources and key resources to be recycled as raw materials in a cradle-to-cradle economy concept. PMID:28111567

Transformation of University Organizations:Leadership and Managerial Implications

Directory of Open Access Journals (Sweden)

Cemil ULUKAN

2005-10-01

Full Text Available Transformation of University Organizations:Leadership and Managerial Implications Cemil ULUKAN, Ph.D Anadolu UniversityOpen Education Faculty Eskisehir-TURKEYABSTRACT Technology and globalization are forcing higher education institutions to transform themselves. This paper aims to contribute to a better understanding the leadership and managerial implications of recent developments for higher education. Reviewing unique characteristics and the fundamental changes shaping higher education, the paper examines the need for organizational transformation and the major managerial implications.

A market-driven commercialization strategy for gasification-based technologies

International Nuclear Information System (INIS)

Klara, J.M.; Tomer, B.J.; Stiegel, G.J.

1998-01-01

In the wake of deregulation of power generation in the US, market-based competition is driving electricity generators to low-cost risk system. In such an environment, gasification-based technologies will not be competitive with low capital cost, efficient, and reliable natural gas-fired facilities for baseload power generation in the foreseeable future. The lack of a near-term market application poses a serious threat to the progress of gasification technology. With a reduction in direct federal funding of large-scale demonstration plants as the trend to reduce the size of government continues, an alternate approach to commercialize gasification-based technologies has been developed at DOE/FETC. This new strategy employs gasification in near-term markets where, due to its ability to coproduce a wide variety of commodity and premium products to meet market requirements, it is an attractive alternative. By obtaining operating experience in near-term coproduction applications, gasification system modules can be refined and improved leading to commercial guarantees and acceptance of gasification technology as a cost-effective technology for baseload power generation when this market begins to open domestically, sometime after 2005

How Talisman Energy implemented oilfield fleet safety using event driven AVL technologies from TELUS

Energy Technology Data Exchange (ETDEWEB)

Munroe, D. [Telus Energy Sector Organization, Calgary, AB (Canada)

2006-07-01

This conference presentation provided information on how Talisman Energy implemented oilfield fleet safety using event driven automated vehicle location (AVL) technologies from TELUS. Background information on Telus in the energy sector, Telus geomatics, Telus mobile resource management (MRM) application modules, as well as Talisman Energy was first provided. Talisman looked to Telus for AVL technologies because it had a need to identify where employees were working, when they arrived and how long they were there. Prior to meeting with TELUS, Talisman Energy had implemented a system consisting of a trunk radio network to transmit data to the control room on the employee's location, however, it was unable to use the radio network to dispatch orders and communicate on an as-needed basis. TELUS had implemented a customized solution that tracks vehicles and provides an easy method of communication for employees to track how long they are working at a site. The service provides the control centre with the tools to monitor the location of the vehicles on a map, and communicate to the employee via a horn when their time has expired at the site. If the employee does not respond, the control room can call the nearest personnel to check on the worker's status. The integrated TELUS solutions uses Global Positioning System (GPS), Geographic Information Systems (GIS) and Wireless communication over the Internet. The presentation provided numerous Talisman specific maps. It concluded with several issues to consider such as cross platform cellular communications supported on a single hardware platform; additional support for Satellite communications utilizing the same GIS platform; the need for extensive support for peripheral devices; and, the need for extensive roaming capabilities. tabs., figs.

Reducing cognitive load in the chemistry laboratory by using technology-driven guided inquiry experiments

Science.gov (United States)

Hubacz, Frank, Jr.

completed by comparing lab grade averages, final exam averages, and final course grade averages between the two groups. Participant mental effort survey results showed significant positive effects of technology in reducing cognitive load for two laboratory investigations. One investigation revealed a significant difference in achievement measured by lab grade average comparisons. Although results of this study are inconclusive as to the usefulness of technology-driven investigations to affect learning, recommendations for further study are discussed.

Novel Technological and Management Options for Accelerating Transformational Changes in Rice and Livestock Systems

Directory of Open Access Journals (Sweden)

Ngonidzashe Chirinda

2017-10-01

Full Text Available Agricultural producers grapple with low farm yields and declining ecosystem services within their landscapes. In several instances, agricultural production systems may be considered largely unsustainable in socioeconomic and ecological (resource conservation and use and impact on nature terms. Novel technological and management options that can serve as vehicles to promote the provision of multiple benefits, including the improvement of smallholder livelihoods, are needed. We call for a paradigm shift to allow designing and implementing agricultural systems that are not only efficient (serving as a means to promote development based on the concept of creating more goods and services while using fewer resources and creating less waste but can also be considered synergistic (symbiotic relationship between socio-ecological systems by simultaneously contributing to major objectives of economic, ecological, and social (equity improvement of agro-ecosystems. These transformations require strategic approaches that are supported by participatory system-level research, experimentation, and innovation. Using data from several studies, we here provide evidence for technological and management options that could be optimized, promoted, and adopted to enable agricultural systems to be efficient, effective, and, indeed, sustainable. Specifically, we present results from a study conducted in Colombia, which demonstrated that, in rice systems, improved water management practices such as Alternate Wetting and Drying (AWD reduce methane emissions (~70%. We also show how women can play a key role in AWD adoption. For livestock systems, we present in vitro evidence showing that the use of alternative feed options such as cassava leaves contributes to livestock feed supplementation and could represent a cost-effective approach for reducing enteric methane emissions (22% to 55%. We argue that to design and benefit from sustainable agricultural systems, there is a

Transformation and self-identity: Student narratives in post-apartheid South Africa

Directory of Open Access Journals (Sweden)

Frans Kamsteeg

2016-11-01

Full Text Available Organisational change processes are by nature complex and often highly contested. This is particularly true of the transformation South African institutions of higher education have been going through since the end of the apartheid era. Using a narrative approach, this article presents a multi-faceted range of stories by the University of the Free State (UFS students who took part in a particular leadership programme designed to make a contribution to institutional, and even, societal change. The plurivocality of the identity work the UFS students’ stories display is based on their ethnic, gender and class diversity. It is the context-sensitive ‘tales of the field’ they tell that might help to understand why the transformation concept as well the various transformation-driven practices in higher education are so ambiguous and contested.

Implementing Genome-Driven Oncology

Science.gov (United States)

Hyman, David M.; Taylor, Barry S.; Baselga, José

2017-01-01

Early successes in identifying and targeting individual oncogenic drivers, together with the increasing feasibility of sequencing tumor genomes, have brought forth the promise of genome-driven oncology care. As we expand the breadth and depth of genomic analyses, the biological and clinical complexity of its implementation will be unparalleled. Challenges include target credentialing and validation, implementing drug combinations, clinical trial designs, targeting tumor heterogeneity, and deploying technologies beyond DNA sequencing, among others. We review how contemporary approaches are tackling these challenges and will ultimately serve as an engine for biological discovery and increase our insight into cancer and its treatment. PMID:28187282

A DC Transformer

Science.gov (United States)

Youngquist, Robert C.; Ihlefeld, Curtis M.; Starr, Stanley O.

2013-01-01

A component level dc transformer is described in which no alternating currents or voltages are present. It operates by combining features of a homopolar motor and a homopolar generator, both de devices, such that the output voltage of a de power supply can be stepped up (or down) with a corresponding step down (or up) in current. The basic theory for this device is developed, performance predictions are made, and the results from a small prototype are presented. Based on demonstrated technology in the literature, this de transformer should be scalable to low megawatt levels, but it is more suited to high current than high voltage applications. Significant development would be required before it could achieve the kilovolt levels needed for de power transmission.

Interfacial waves generated by electrowetting-driven contact line motion

Science.gov (United States)

Ha, Jonghyun; Park, Jaebum; Kim, Yunhee; Shin, Bongsu; Bae, Jungmok; Kim, Ho-Young

2016-10-01

The contact angle of a liquid-fluid interface can be effectively modulated by the electrowetting-on-dielectric (EWOD) technology. Rapid movement of the contact line can be achieved by swift changes of voltage at the electrodes, which can give rise to interfacial waves under the strong influence of surface tension. Here we experimentally demonstrate EWOD-driven interfacial waves of overlapping liquids and compare their wavelength and decay length with the theoretical results obtained by a perturbation analysis. Our theory also allows us to predict the temporal evolution of the interfacial profiles in either rectangular or cylindrical containers, as driven by slipping contact lines. This work builds a theoretical framework to understand and predict the dynamics of capillary waves of a liquid-liquid interface driven by EWOD, which has practical implications on optofluidic devices used to guide light.

Current trends and new challenges of databases and web applications for systems driven biological research

Directory of Open Access Journals (Sweden)

Pradeep Kumar eSreenivasaiah

2010-12-01

Full Text Available Dynamic and rapidly evolving nature of systems driven research imposes special requirements on the technology, approach, design and architecture of computational infrastructure including database and web application. Several solutions have been proposed to meet the expectations and novel methods have been developed to address the persisting problems of data integration. It is important for researchers to understand different technologies and approaches. Having familiarized with the pros and cons of the existing technologies, researchers can exploit its capabilities to the maximum potential for integrating data. In this review we discuss the architecture, design and key technologies underlying some of the prominent databases (DBs and web applications. We will mention their roles in integration of biological data and investigate some of the emerging design concepts and computational technologies that are likely to have a key role in the future of systems driven biomedical research.

A novel safety device with metal counter meshing gears discriminator directly driven by axial flux permanent magnet micromotors based on MEMS technology

Science.gov (United States)

Zhang, Weiping; Chen, Wenyuan; Zhao, Xiaolin; Li, Shengyong; Jiang, Yong

2005-08-01

In a novel safety device based on MEMS technology for high consequence systems, the discriminator consists of two groups of metal counter meshing gears and two pawl/ratchet wheel mechanisms. Each group of counter meshing gears is onepiece and driven directly by an axial flux permanent magnet micromotor respectively. The energy-coupling element is an optical shutter with two collimators and a coupler wheel. The safety device's probability is less than 1/106. It is fabricated by combination of an LiGA-like process and precision mechanical engineering. The device has simple structure, few dynamic problems, high strength and strong reliability.

Implementing a Dynamic Database-Driven Course Using LAMP

Science.gov (United States)

Laverty, Joseph Packy; Wood, David; Turchek, John

2011-01-01

This paper documents the formulation of a database driven open source architecture web development course. The design of a web-based curriculum faces many challenges: a) relative emphasis of client and server-side technologies, b) choice of a server-side language, and c) the cost and efficient delivery of a dynamic web development, database-driven…

Performance of new 400-MHz HTS power-driven magnet NMR technology on typical pharmaceutical API, cinacalcet HCl.

Science.gov (United States)

Silva Elipe, Maria Victoria; Donovan, Neil; Krull, Robert; Pooke, Donald; Colson, Kimberly L

2018-04-17

After years towards higher field strength magnets, nuclear magnetic resonance (NMR) technology in commercial instruments in the past decade has expanded at low and high magnetic fields to take advantage of new opportunities. At lower field strengths, permanent magnets are well established, whereas for midrange and high field, developments utilize superconducting magnets cooled with cryogenic liquids. Recently, the desire to locate NMR spectrometers in nontypical NMR laboratories has created interest in the development of cryogen-free magnets. These magnets require no cryogenic maintenance, eliminating routine filling and large cryogen dewars in the facility. Risks of spontaneous quenches and safety concerns when working with cryogenic liquids are eliminated. The highest field commercially available cryogen-free NMR magnet previously reported was at 4.7 T in 2013. Here we tested a prototype cryogen-free 9.4-T power-driven high-temperature-superconducting (HTS) magnet mated to commercial NMR spectrometer electronics. We chose cinacalcet HCl, a typical active pharmaceutical ingredient, to evaluate its performance towards structure elucidation. Satisfactory standard 1D and 2D homonuclear and heteronuclear NMR results were obtained and compared with those from a standard 9.4-T cryogenically cooled superconducting NMR instrument. The results were similar between both systems with minor differences. Further comparison with different shims and probes in the HTS magnet system confirmed that the magnet homogeneity profile could be matched with commercially available NMR equipment for optimal results. We conclude that HTS magnet technology works well providing results comparable with those of standard instruments, leading us to investigate additional applications for this magnet technology outside a traditional NMR facility. Copyright © 2018 John Wiley & Sons, Ltd.

Innovative Strategic Leader Transforming From a Low-Cost Strategy to Product Differentiation Strategy

Directory of Open Access Journals (Sweden)

Ray R Gehani

2013-05-01

Full Text Available After the 2008 economic slowdown, and with increasing assault from enterprises from emerging economies, many innovative strategic leaders of multinational enterprises are forced to radically transform their enterprises. They often choose to change from low-cost strategy to innovation-driven product differentiation strategy. In this study, we use a multi-level Grounded Theory Methodology (GTM and agency theory to empirically illustrate such a strategic transformation at a large composite fabric and accessories enterprise. Lessons are drawn from the impact of strategic transformation at multiple levels: strategic leader level, tactical-team manager level, operational follower level, and stakeholder level. Implications for practitioners and researchers are provided by way of mindful leader orientation and value-based innovation.

Big Data: An Opportunity for Collaboration with Computer Scientists on Data-Driven Science

Science.gov (United States)

Baru, C.

2014-12-01

Big data technologies are evolving rapidly, driven by the need to manage ever increasing amounts of historical data; process relentless streams of human and machine-generated data; and integrate data of heterogeneous structure from extremely heterogeneous sources of information. Big data is inherently an application-driven problem. Developing the right technologies requires an understanding of the applications domain. Though, an intriguing aspect of this phenomenon is that the availability of the data itself enables new applications not previously conceived of! In this talk, we will discuss how the big data phenomenon creates an imperative for collaboration among domain scientists (in this case, geoscientists) and computer scientists. Domain scientists provide the application requirements as well as insights about the data involved, while computer scientists help assess whether problems can be solved with currently available technologies or require adaptaion of existing technologies and/or development of new technologies. The synergy can create vibrant collaborations potentially leading to new science insights as well as development of new data technologies and systems. The area of interface between geosciences and computer science, also referred to as geoinformatics is, we believe, a fertile area for interdisciplinary research.

Neutron data for accelerator-driven transmutation technologies. Annual Report 2002/2003

International Nuclear Information System (INIS)

Blomgren, J.; Hildebrand, A.; Mermod, P.; Olsson, N.; Pomp, S.; Oesterlund, M.

2003-08-01

The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Department for neutron research, Uppsala university. The activities of the group is directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: Analysis and documentation has been finalized of previously performed measurements of elastic neutron scattering from carbon and lead at 96 MeV. The precision in the results surpasses all previous data by at least an order of magnitude. These measurements represent the highest energy in neutron scattering where the ground state has been resolved. The results show that all previous theory work has underestimated the probability for neutron scattering at the present energy by 0-30 %. A new method for measurements of absolute probabilities for neutron-induced nuclear reactions with experimental techniques only has been developed. Previously, only two such methods have been known. One student has reached his PhD exam. Two PhD students have been accepted. TSL has decided to build a new neutron beam facility with significantly improved performance for these, and similar, activities. A new instrument for measurements of inelastic neutron scattering has been built, tested and found to meet the specifications. This work has been performed in collaboration with two French research groups from Caen and Nantes. The instrument is intended to be used for a series of experiments during the coming years. Previous work by the group on nuclear data for assessment of electronics reliability has lead to a new industry standard in the USA

Neutron data for accelerator-driven transmutation technologies. Annual Report 2002/2003

Energy Technology Data Exchange (ETDEWEB)

Blomgren, J.; Hildebrand, A.; Mermod, P.; Olsson, N.; Pomp, S.; Oesterlund, M. [Uppsala Univ. (Sweden). Dept. for Neutron Research

2003-08-01

The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Department for neutron research, Uppsala university. The activities of the group is directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: Analysis and documentation has been finalized of previously performed measurements of elastic neutron scattering from carbon and lead at 96 MeV. The precision in the results surpasses all previous data by at least an order of magnitude. These measurements represent the highest energy in neutron scattering where the ground state has been resolved. The results show that all previous theory work has underestimated the probability for neutron scattering at the present energy by 0-30 %. A new method for measurements of absolute probabilities for neutron-induced nuclear reactions with experimental techniques only has been developed. Previously, only two such methods have been known. One student has reached his PhD exam. Two PhD students have been accepted. TSL has decided to build a new neutron beam facility with significantly improved performance for these, and similar, activities. A new instrument for measurements of inelastic neutron scattering has been built, tested and found to meet the specifications. This work has been performed in collaboration with two French research groups from Caen and Nantes. The instrument is intended to be used for a series of experiments during the coming years. Previous work by the group on nuclear data for assessment of electronics reliability has lead to a new industry standard in the USA.

Transformation priming helps to disambiguate sudden changes of sensory inputs.

Science.gov (United States)

Pastukhov, Alexander; Vivian-Griffiths, Solveiga; Braun, Jochen

2015-11-01

Retinal input is riddled with abrupt transients due to self-motion, changes in illumination, object-motion, etc. Our visual system must correctly interpret each of these changes to keep visual perception consistent and sensitive. This poses an enormous challenge, as many transients are highly ambiguous in that they are consistent with many alternative physical transformations. Here we investigated inter-trial effects in three situations with sudden and ambiguous transients, each presenting two alternative appearances (rotation-reversing structure-from-motion, polarity-reversing shape-from-shading, and streaming-bouncing object collisions). In every situation, we observed priming of transformations as the outcome perceived in earlier trials tended to repeat in subsequent trials and this repetition was contingent on perceptual experience. The observed priming was specific to transformations and did not originate in priming of perceptual states preceding a transient. Moreover, transformation priming was independent of attention and specific to low level stimulus attributes. In summary, we show how "transformation priors" and experience-driven updating of such priors helps to disambiguate sudden changes of sensory inputs. We discuss how dynamic transformation priors can be instantiated as "transition energies" in an "energy landscape" model of the visual perception. Copyright © 2015 Elsevier Ltd. All rights reserved.

Immersive STEM: From Fulldome to VR Technologies

Science.gov (United States)

Wyatt, R. J.

2015-12-01

For more than 15 years, fulldome video technology has transformed planetariums worldwide, using data-driven visualizations to support science storytelling. Fulldome video shares significant technical infrastructure with emerging VR headset technologies, and these personalized VR experiences allow for new audiences and new experiences of an existing library of context—as well as affording new opportunities for fulldome producers to explore. At the California Academy of Sciences, we are translating assets for our planetarium shows into immersive experiences for a variety of HR headsets. We have adapted scenes from our four award-wining features—Fragile Planet (2008), Life: A Cosmic Story (2010), Earthquake: Evidence of a Restless Planet (2012), and Habitat Earth (2015)—to place viewers inside a virtual planetarium viewing the shows. Similarly, we have released two creative-commons mini-shows on various VR outlets. This presentation will also highlight content the Academy will make available from our upcoming 2016 planetarium show about asteroids, comets, and solar system origins, some of which has been formatted for a full four-pi-steradian perspective. The shared immersive environment of digital planetariums offers significant opportunities for education and affective engagement of STEM-hungry audiences—including students, families, and adults. With the advent of VR technologies, we can leverage the experience of fulldome producers and planetarium professionals to create personalized home experiences that allow new ways to experience their content.

SUPERNOVAE POWERED BY MAGNETARS THAT TRANSFORM INTO BLACK HOLES

Energy Technology Data Exchange (ETDEWEB)

Moriya, Takashi J. [Division of Theoretical Astronomy, National Astronomical Observatory of Japan, National Institues of Natural Sciences, 2-21-1 Osawa, Mitaka, Tokyo 181-8588 (Japan); Metzger, Brian D. [Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Blinnikov, Sergei I., E-mail: takashi.moriya@nao.ac.jp [Institute for Theoretical and Experimental Physics, Bolshaya Cheremushkinskaya ulitsa 25, 117218 Moscow (Russian Federation)

2016-12-10

Rapidly rotating, strongly magnetized neutron stars (NSs; magnetars) can release their enormous rotational energy via magnetic spin-down, providing a power source for bright transients such as superluminous supernovae (SNe). On the other hand, particularly massive (so-called supramassive) NSs require a minimum rotation rate to support their mass against gravitational collapse, below which the NS collapses to a black hole (BH). We model the light curves (LCs) of SNe powered with magnetars that transform into BHs. Although the peak luminosities can reach high values in the range of superluminous SNe, their post maximum LCs can decline very rapidly because of the sudden loss of the central energy input. Early BH transformation also enhances the shock breakout signal from the magnetar-driven bubble relative to the main SN peak. Our synthetic LCs of SNe powered by magnetars transforming to BHs are consistent with those of some rapidly evolving bright transients recently reported by Arcavi et al.

Generation of high-intensity sub-30 as pulses by inhomogeneous polarization gating technology in bowtie-shaped nanostructure

Science.gov (United States)

Feng, Liqiang; Feng, A. Yuanzi

2018-04-01

The generation of high-order harmonics and single attosecond pulses (SAPs) from He atom driven by the inhomogeneous polarization gating technology in a bowtie-shaped nanostructure is theoretically investigated. The results show that by the proper addition of bowtie-shaped nanostructure along the driven laser polarization direction, the harmonic emission becomes sensitive to the position of the laser field, and the harmonics emitted at the maximum orders that generate SAPs occur only at one side of the region inside the nanostructure. As a result, not only the harmonic cutoff can be extended, but also the modulations of the harmonics can be decreased, showing a carrier envelope phase independent harmonic cutoff with a bandwidth of 310 eV. Further, with the proper introduction of an ultraviolet pulse, the harmonic yield can be enhanced by 2 orders of magnitude. Finally, by the Fourier transformation of the selected harmonics, some SAPs with a full width at half maximum of sub-30 as can be obtained.

Transformations: Technology and the Music Industry.

Science.gov (United States)

Peters, G. David

2001-01-01

Focuses on the companies and organizations of the Music Industry Conference (MIC). Addresses topics such as: changes in companies due to technology, audio compact discs, the music instrument digital interface (MIDI) , digital sound recording, and the MIC on-line music instruction programs offered. (CMK)

The physics design of accelerator-driven transmutation systems

International Nuclear Information System (INIS)

Venneri, F.

1995-01-01

Nuclear systems under study in the Los Alamos Accelerator-Driven Transmutation Technology program (ADTT) will allow the destruction of nuclear spent fuel and weapons-return plutonium, as well as the production of nuclear energy from the thorium cycle, without a long-lived radioactive waste stream. The subcritical systems proposed represent a radical departure from traditional nuclear concepts (reactors), yet the actual implementation of ADTT systems is based on modest extrapolations of existing technology. These systems strive to keep the best that the nuclear technology has developed over the years, within a sensible conservative design envelope and eventually manage to offer a safer, less expensive and more environmentally sound approach to nuclear power

The physics design of accelerator-driven transmutation systems

Energy Technology Data Exchange (ETDEWEB)

Venneri, F. [Los Alamos National Laboratory, NM (United States)

1995-10-01

Nuclear systems under study in the Los Alamos Accelerator-Driven Transmutation Technology program (ADTT) will allow the destruction of nuclear spent fuel and weapons-return plutonium, as well as the production of nuclear energy from the thorium cycle, without a long-lived radioactive waste stream. The subcritical systems proposed represent a radical departure from traditional nuclear concepts (reactors), yet the actual implementation of ADTT systems is based on modest extrapolations of existing technology. These systems strive to keep the best that the nuclear technology has developed over the years, within a sensible conservative design envelope and eventually manage to offer a safe, less expensive and more environmentally sound approach to nuclear power.

Architecture-driven Migration of Legacy Systems to Cloud-enabled Software

DEFF Research Database (Denmark)

Ahmad, Aakash; Babar, Muhammad Ali

2014-01-01

of legacy systems to cloud computing. The framework leverages the software reengineering concepts that aim to recover the architecture from legacy source code. Then the framework exploits the software evolution concepts to support architecture-driven migration of legacy systems to cloud-based architectures....... The Legacy-to-Cloud Migration Horseshoe comprises of four processes: (i) architecture migration planning, (ii) architecture recovery and consistency, (iii) architecture transformation and (iv) architecture-based development of cloud-enabled software. We aim to discover, document and apply the migration...

Heat Driven Cooling in District Energy Systems; Vaermedriven Kyla

Energy Technology Data Exchange (ETDEWEB)

Rydstrand, Magnus; Martin, Viktoria; Westermark, Mats [Royal Inst. of Technology, Stockholm (Sweden). Dept. of Chemical Engineering and Technology

2004-07-01

This report is reviewing different heat driven technologies for the production of cooling. It is shown that the supply of cooling gives the highest fuel utilization if heat from CHP production is used for the production of cooling instead of maximizing the electricity output in a condensing plant. High fuel utilization is reached since the direct production of cooling from heat is a thermodynamic shortcut as compared to the production of electricity as an intermediate product before cooling is produced. At direct production of cooling from heat it is possible to obtain 70 percent of the obtainable cooling of an ideal process. If electricity is produced from heat, 70 percent electricity could be obtained as compared to an ideal process. If this electricity would be used for the production of cooling 70 percent of the obtainable cooling in an ideal process would the result. The total production of cooling from heat with electricity as an intermediate product would therefore give 50 percent cooling as compared to an ideal process. Hence, heat driven cooling will give more cooling for a given fuel input. In the review of the different heat driven cooling options it was found that there are many alternatives suitable for different applications. Absorption cooling is suitable for water distributed cooling if the latent cooling load is low. Desiccant cooling is believed to have a large market in climates (applications) with high latent cooling loads. In the energy efficiency evaluation it is found that the highest fuel utilization is given for a central production of electricity using either district heating or district cooling as the energy carrier to supply cooling. In fact the potential of district heating as the energy carrier is thought to be the largest in large cities with humid climates. Further it is found that the chiller heat sink can contribute significantly to the cost in many applications, especially if water and/or electricity consumption are issues with

ARCHITECTURAL PLACEMAKING OF TECHNOLOGY PARKS: ENCOURAGEMENT OF CREATIVE THINKING

Directory of Open Access Journals (Sweden)

Rykov Kirill Nikolaevich

2012-10-01

Full Text Available The present-day postindustrial or information-oriented society features an ever growing role of creative and intellectual abilities. This trend facilitates transformation of the workforce, as the portion of manual labor is reduced, while the one of intellectual labor goes up. As a result, architectural placemaking has to meet the new requirements driven by the specific nature of social and physiological constituents of the headwork. The aim of the article is the identification of new challenges that the high-quality architecture has to meet in its efforts to service the intellectual labour environment. For illustrative purposes, the author has chosen research and technology parks as the most typical postindustrial facilities. According to the author, intellectual constituents of the architectural practice represent systematic and research components. This division is the result of the analysis of research and technology parks. The author has made an attempt to identify special conditions of effective creativity in architectural practice. They include comfort, availability, information system development, calm, sociality, significance and variability. The list of conditions and general methods of their implementation presented by the author can be used in a wide range of project goals connected with the architectural design of research and technology parks and stimulation of creative potential of the people involved.

Structural Transformation, Biased Technological Change, and Employment in Vietnam

DEFF Research Database (Denmark)

Abbott, Philip; Tarp, Finn; Wu, Ce

2015-01-01

Employment in Vietnam and elsewhere in Asia has grown more slowly than GDP over the last several decades. This means GDP per capita is rising. Vietnamese policymakers, however, are concerned that ongoing structural transformation is creating too few jobs. We use data for seven aggregated sectors ...

Structural transformation, biased technological change, and employment in Vietnam

DEFF Research Database (Denmark)

Abbott, Philip; Tarp, Finn; Wu, Ce

Employment in Vietnam and elsewhere in Asia has grown more slowly than GDP over the last several decades. This means GDP per capita is rising. Vietnamese policymakers, however, are concerned that ongoing structural transformation is creating too few jobs. We use data for seven aggregated sectors ...

MISTRAL : A Language for Model Transformations in the MOF Meta-modeling Architecture

NARCIS (Netherlands)

Kurtev, Ivan; van den Berg, Klaas; Aßmann, Uwe; Aksit, Mehmet; Rensink, Arend

2005-01-01

n the Meta Object Facility (MOF) meta-modeling architecture a number of model transformation scenarios can be identified. It could be expected that a meta-modeling architecture will be accompanied by a transformation technology supporting the model transformation scenarios in a uniform way. Despite

Dielectrophoresis-magnetophoresis force driven magnetic nanoparticle movement in transformer oil based magnetic fluids.

Science.gov (United States)

Lee, Jong-Chul; Lee, Sangyoup

2013-09-01

Magnetic fluid is a stable colloidal mixture contained magnetic nanoparticles coated with a surfactant. Recently, it was found that the fluid has properties to increase heat transfer and dielectric characteristics due to the added magnetic nanoparticles in transformer oils. The magnetic nanoparticles in the fluid experience an electrical force directed toward the place of maximum electric field strength when the electric field is applied. And when the external magnetic field is applied, the magnetic nanoparticles form long chains oriented along the direction of the field. The behaviors of magnetic nanoparticles in both the fields must play an important role in changing the heat transfer and dielectric characteristics of the fluids. In this study, we visualized the movement of magnetic nanoparticles influenced by both the fields applied in-situ. It was found that the magnetic nanoparticles travel in the region near the electrode by the electric field and form long chains along the field direction by the magnetic field. It can be inferred that the movement of magnetic nanoparticles appears by both the fields, and the breakdown voltage of transformer oil based magnetic fluids might be influenced according to the dispersion of magnetic nanoparticles.

Data-Driven H∞ Control for Nonlinear Distributed Parameter Systems.

Science.gov (United States)

Luo, Biao; Huang, Tingwen; Wu, Huai-Ning; Yang, Xiong

2015-11-01

The data-driven H∞ control problem of nonlinear distributed parameter systems is considered in this paper. An off-policy learning method is developed to learn the H∞ control policy from real system data rather than the mathematical model. First, Karhunen-Loève decomposition is used to compute the empirical eigenfunctions, which are then employed to derive a reduced-order model (ROM) of slow subsystem based on the singular perturbation theory. The H∞ control problem is reformulated based on the ROM, which can be transformed to solve the Hamilton-Jacobi-Isaacs (HJI) equation, theoretically. To learn the solution of the HJI equation from real system data, a data-driven off-policy learning approach is proposed based on the simultaneous policy update algorithm and its convergence is proved. For implementation purpose, a neural network (NN)- based action-critic structure is developed, where a critic NN and two action NNs are employed to approximate the value function, control, and disturbance policies, respectively. Subsequently, a least-square NN weight-tuning rule is derived with the method of weighted residuals. Finally, the developed data-driven off-policy learning approach is applied to a nonlinear diffusion-reaction process, and the obtained results demonstrate its effectiveness.

International Conference on Transformations in Engineering Education

CERN Document Server

2015-01-01

This book comprises the proceedings of the International Conference on Transformations in Engineering Education conducted jointly by BVB College of Engineering & Technology, Hubli, India and Indo US Collaboration for Engineering Education (IUCEE). This event is done in collaboration with International Federation of Engineering Education Societies (IFEES), American Society for Engineering Education (ASEE) and Global Engineering Deans' Council (GEDC). The conference is about showcasing the transformational practices in Engineering Education space.

Fenton-driven regeneration of MTBE-spent granular activated carbon - Effects of particle size and Iron Amendment Procedures

Science.gov (United States)

Fenton-driven regeneration of spent granular activated carbon (GAC) is a technology being developed to regenerate organic contaminant-spent GAC. Here, the effect of GAC particle size (>2 mm to Fenton-driven oxidation of methyl tert-butyl ether (MTBE)-spent GAC was ev...

Design and application of multilayer monolithic microwave integrated circuit transformers

Energy Technology Data Exchange (ETDEWEB)

Economides, S.B

1999-07-01

The design and performance of planar spiral transformers, using multilayer GaAs and silicon MMIC technology, are presented. This multilayer technology gives new opportunities for improving the performance of planar transformers, couplers and baluns. Planar transformers have high parasitic resistance and capacitance and low levels of coupling. Using multilayer technology these problems are overcome by applying a multilayer structure of three metal layers separated by two polyimide dielectric layers. The improvements gained by placing the conductors on different metal layers, and using conductors raised on polyimide layers for low capacitance, have been investigated. The circuits were fabricated using a novel experimental fabrication process, which uses entirely standard materials and techniques and is compatible with BJT's and silicon-germanium HBT's. The transformers were all characterised up to 20 GHz using RF-on-wafer measurements. They demonstrated good performance, considering the experimental nature of in-house multilayer technology and the difficulties in simulating these three-dimensional new geometries. With high resistivity substrates, the silicon components achieved virtually the same performance as their gallium arsenide counterparts. The transformers were then used in simulations of transformer-coupled HBT amplifier circuits, to demonstrate their capabilities. It was shown that these circuits present good performance compared to standard off-the shelf component circuits and are very promising for use in most multilayer MMIC applications. The structures were further used in coupling configurations, and applied in balun circuits and pushpull amplifiers. The spiral transformer coupler can operate at low frequencies without using up much chip area. In a balun configuration, the balun can compensate for coupling and phase imbalance and operates over 5 to 15 GHz. The spiral coupler does not always need multilayer processing, so the balun may be

Applications of ferro-nanofluid on a micro-transformer.

Science.gov (United States)

Tsai, Tsung-Han; Kuo, Long-Sheng; Chen, Ping-Hei; Lee, Da-Sheng; Yang, Chin-Ting

2010-01-01

An on-chip transformer with a ferrofluid magnetic core has been developed and tested. The transformer consists of solenoid-type coil and a magnetic core of ferrofluid, with the former fabricated by MEMS technology and the latter by a chemical co-precipitation method. The performance of the MEMS transformer with a ferrofluid magnetic core was measured and simulated with frequencies ranging from 100 kHz to 100 MHz. Experimental results reveal that the presence of the ferrofluid increases the inductance of coils and the coupling coefficient of transformer; however, it also increases the resistance owing to the lag between the external magnetic field and the magnetization of the material.

Governance of information technology in a complex economy

Directory of Open Access Journals (Sweden)

Colin Prince

2016-06-01

Full Text Available Globally, the energy sector is fast nearing a tipping point of no return, transitioning from fossil fuel to renewable energy. Business is turning to the IT department to leverage technology that will reduce organisational wide production and operational cost in a fast changing economy. The business expects the IT department to be innovative and build new IT competencies for a rapid response to the transition towards renewable energy. This study contributes new knowledge regarding the impact of management theory and approaches on the successful implementation of IT in the African Oil and Gas industry. The research shows that capabilities such as innovation and people competencies are growing in importance while IT leadership is becoming a critical role in supporting and delivering on the business objectives as enabler and transformational agent of business. Capabilities such as systems thinking, business acumen and interpersonal skills are key IT management competencies for transformation innovation leadership. Knowing the business needs, the IT department can provide integrated solutions that support the complete business value chain without exposing the business to a rigid IT structure. Remaining competitive, business-driven IT innovation is a vehicle for business to meet new realities. The research followed a multistage mixed-model design using the African Oil and Gas industry as case study.

Fenton- and Persulfate-driven Regeneration of Contaminant-spent Granular Activated Carbon

Science.gov (United States)

Fenton- or persulfate-driven chemical oxidation regeneration of spent granular activated carbon (GAC) involves the combined, synergistic use of two treatment technologies: adsorption of organic chemicals onto GAC and chemical oxidation regeneration of the spent-GAC. Environmental...

Wave driven magnetic reconnection in the Taylor problem

International Nuclear Information System (INIS)

Fitzpatrick, Richard; Bhattacharjee, Amitava; Ma Zhiwei; Linde, Timur

2003-01-01

An improved Laplace transform theory is developed in order to investigate the initial response of a stable slab plasma equilibrium enclosed by conducting walls to a suddenly applied wall perturbation in the so-called Taylor problem. The novel feature of this theory is that it does not employ asymptotic matching. If the wall perturbation is switched on slowly compared to the Alfven time then the plasma response eventually asymptotes to that predicted by conventional asymptotic matching theory. However, at early times there is a compressible Alfven wave driven contribution to the magnetic reconnection rate which is not captured by asymptotic matching theory, and leads to a significant increase in the reconnection rate. If the wall perturbation is switched on rapidly compared to the Alfven time then strongly localized compressible Alfven wave-pulses are generated which bounce backward and forward between the walls many times. Each instance these wave-pulses cross the resonant surface they generate a transient surge in the reconnection rate. The maximum pulse driven reconnection rate can be much larger than that predicted by conventional asymptotic matching theory

From chalkboard, slides, and paper to e-learning: How computing technologies have transformed anatomical sciences education.

Science.gov (United States)

Trelease, Robert B

2016-11-01

Until the late-twentieth century, primary anatomical sciences education was relatively unenhanced by advanced technology and dependent on the mainstays of printed textbooks, chalkboard- and photographic projection-based classroom lectures, and cadaver dissection laboratories. But over the past three decades, diffusion of innovations in computer technology transformed the practices of anatomical education and research, along with other aspects of work and daily life. Increasing adoption of first-generation personal computers (PCs) in the 1980s paved the way for the first practical educational applications, and visionary anatomists foresaw the usefulness of computers for teaching. While early computers lacked high-resolution graphics capabilities and interactive user interfaces, applications with video discs demonstrated the practicality of programming digital multimedia linking descriptive text with anatomical imaging. Desktop publishing established that computers could be used for producing enhanced lecture notes, and commercial presentation software made it possible to give lectures using anatomical and medical imaging, as well as animations. Concurrently, computer processing supported the deployment of medical imaging modalities, including computed tomography, magnetic resonance imaging, and ultrasound, that were subsequently integrated into anatomy instruction. Following its public birth in the mid-1990s, the World Wide Web became the ubiquitous multimedia networking technology underlying the conduct of contemporary education and research. Digital video, structural simulations, and mobile devices have been more recently applied to education. Progressive implementation of computer-based learning methods interacted with waves of ongoing curricular change, and such technologies have been deemed crucial for continuing medical education reforms, providing new challenges and opportunities for anatomical sciences educators. Anat Sci Educ 9: 583-602. © 2016 American

The metal-driven biogeochemistry of gaseous compounds in the environment

CERN Document Server

Kroneck, Peter MH

2014-01-01

MILS-14 provides a most up-to-date view of the exciting biogeochemistry of gases in our environment as driven mostly by microorganisms. These employ a machinery of sophisticated metalloenzymes, where especially transition metals (such as Fe, Ni, Cu, Mo, W) play a fundamental role, that is, in the activation, transformation and syntheses of gases like dihydrogen, methane, carbon monoxide, acetylene and those of the biological nitrogen and sulfur cycles. The Metal-Driven Biogeochemistry of Gaseous Compounds in the Environment is a vibrant research area based mainly on structural and microbial biology, inorganic biological chemistry and environmental biochemistry. All this is covered in an authoritative manner in 11 stimulating chapters, written by 26 internationally recognized experts and supported by nearly 1200 references, informative tables and about 100 illustrations (two thirds in color). MILS-14 also provides excellent information for teaching. Peter M. H. Kroneck is a bioinorganic chemist who is explorin...

Fundamental Theories and Key Technologies for Smart and Optimal Manufacturing in the Process Industry

Directory of Open Access Journals (Sweden)

Feng Qian

2017-04-01

Full Text Available Given the significant requirements for transforming and promoting the process industry, we present the major limitations of current petrochemical enterprises, including limitations in decision-making, production operation, efficiency and security, information integration, and so forth. To promote a vision of the process industry with efficient, green, and smart production, modern information technology should be utilized throughout the entire optimization process for production, management, and marketing. To focus on smart equipment in manufacturing processes, as well as on the adaptive intelligent optimization of the manufacturing process, operating mode, and supply chain management, we put forward several key scientific problems in engineering in a demand-driven and application-oriented manner, namely: ① intelligent sensing and integration of all process information, including production and management information; ② collaborative decision-making in the supply chain, industry chain, and value chain, driven by knowledge; ③ cooperative control and optimization of plant-wide production processes via human-cyber-physical interaction; and ④ life-cycle assessments for safety and environmental footprint monitoring, in addition to tracing analysis and risk control. In order to solve these limitations and core scientific problems, we further present fundamental theories and key technologies for smart and optimal manufacturing in the process industry. Although this paper discusses the process industry in China, the conclusions in this paper can be extended to the process industry around the world.

Low voltage driven dielectric electro active polymer actuator with integrated piezoelectric transformer based driver

DEFF Research Database (Denmark)

Andersen, Thomas; Rødgaard, Martin Schøler; Thomsen, Ole Cornelius

2011-01-01

actuators, a low voltage solution is developed by integrating the driver electronic into a 110 mm tall cylindrical coreless Push InLastor actuator. To decrease the size of the driver, a piezoelectric transformer (PT) based solution is utilized. The PT is essentially an improved Rosen type PT...

How Can Information and Communication Technology Improve Healthcare Inequalities and Healthcare Inequity? The Concept of Context Driven Care.

Science.gov (United States)

Yee, Kwang Chien; Bettiol, Silvana; Nash, Rosie; Macintyrne, Kate; Wong, Ming Chao; Nøhr, Christian

2018-01-01

Advances in medicine have improved health and healthcare for many around the world. The challenge is achieving the best outcomes of health via healthcare delivery to every individual. Healthcare inequalities exist within a country and between countries. Health information technology (HIT) has provided a mean to deliver equal access to healthcare services regardless of social context and physical location. In order to achieve better health outcomes for every individual, socio-cultural factors, such as literacy and social context need to consider. This paper argues that HIT while improves healthcare inequalities by providing access, might worsen healthcare inequity. In order to improve healthcare inequity using HIT, this paper argues that we need to consider patients and context, and hence the concept of context driven care. To improve healthcare inequity, we need to conceptually consider the patient's view and methodologically consider design methods that achieve participatory outcomes.

Physics-Driven Innovation In the Oil and Gas Industry

Science.gov (United States)

Poitzsch, Martin

2014-03-01

In terms of sheer scale and financial investment and geographical footprint, nothing is bigger than the oil and gas industry. This ``mature industry'' employs a bewildering mix of technologies dating from the 19th century to the 21th. Oil well construction represents one of the largest volume markets for steel tubulars, Portland cement, and high-quality sand. On the other hand, advanced 3D seismic data processing, shaped-charge perforating, and nuclear well logging have consistently driven forward the state of the art in their respective areas of applied science, as much or more so than defense or other industries. Moreover, a surprising number of physicists have made their careers in the oil industry. To succeed at introducing new technology requires understanding which problems most need to be solved. The most esoteric technology can take off in this industry if it honestly offers the best solution to a key problem that is costing millions of dollars in risk or inefficiency. When the right breakthrough solution emerges, the resources to implement it can be almost limitless. However, the prevailing culture is conservative and brutally cost-driven: any cheaper or simpler solution that performs as well will prevail, no matter how inelegant!

Design Driven Innovation as a Differentiation Strategy - in the Context of Automotive Industry

Directory of Open Access Journals (Sweden)

Mosarrat Farhana

2015-07-01

Full Text Available Though, in the automotive industry, technology is considered as a source of innovation and development, emerging change in consumer perception has brought industry focus on design. Evolution of this industry is closely related to the convergence of technology and design. In such context, implication of design driven innovation strategy in the automotive industry has potential to be explored and to create sustained competitive advantage through balancing customers’ need, technological opportunities and product meaning. The aim of this paper is to give a holistic view of design driven innovation as a differentiation strategy in the automotive industry and its implication for strategic management through some relevant research reviews and empirical information. On the contrary, this research lacks detailed description on industry practice to provide greater breadth, since it attempts to correlate the strategic concept of design with the dynamic capability of a firm in that particular industry.

Model-Driven Approach for Body Area Network Application Development.

Science.gov (United States)

Venčkauskas, Algimantas; Štuikys, Vytautas; Jusas, Nerijus; Burbaitė, Renata

2016-05-12

This paper introduces the sensor-networked IoT model as a prototype to support the design of Body Area Network (BAN) applications for healthcare. Using the model, we analyze the synergistic effect of the functional requirements (data collection from the human body and transferring it to the top level) and non-functional requirements (trade-offs between energy-security-environmental factors, treated as Quality-of-Service (QoS)). We use feature models to represent the requirements at the earliest stage for the analysis and describe a model-driven methodology to design the possible BAN applications. Firstly, we specify the requirements as the problem domain (PD) variability model for the BAN applications. Next, we introduce the generative technology (meta-programming as the solution domain (SD)) and the mapping procedure to map the PD feature-based variability model onto the SD feature model. Finally, we create an executable meta-specification that represents the BAN functionality to describe the variability of the problem domain though transformations. The meta-specification (along with the meta-language processor) is a software generator for multiple BAN-oriented applications. We validate the methodology with experiments and a case study to generate a family of programs for the BAN sensor controllers. This enables to obtain the adequate measure of QoS efficiently through the interactive adjustment of the meta-parameter values and re-generation process for the concrete BAN application.

Outlier Detection with Space Transformation and Spectral Analysis

DEFF Research Database (Denmark)

Dang, Xuan-Hong; Micenková, Barbora; Assent, Ira

2013-01-01

which rely on notions of distances or densities, this approach introduces a novel concept based on local quadratic entropy for evaluating the similarity of a data object with its neighbors. This information theoretic quantity is used to regularize the closeness amongst data instances and subsequently......Detecting a small number of outliers from a set of data observations is always challenging. In this paper, we present an approach that exploits space transformation and uses spectral analysis in the newly transformed space for outlier detection. Unlike most existing techniques in the literature...... benefits the process of mapping data into a usually lower dimensional space. Outliers are then identified by spectral analysis of the eigenspace spanned by the set of leading eigenvectors derived from the mapping procedure. The proposed technique is purely data-driven and imposes no assumptions regarding...

Digital health is a cultural transformation of traditional healthcare.

Science.gov (United States)

Meskó, Bertalan; Drobni, Zsófia; Bényei, Éva; Gergely, Bence; Győrffy, Zsuzsanna

2017-01-01

Under the term "digital health", advanced medical technologies, disruptive innovations and digital communication have gradually become inseparable from providing best practice healthcare. While the cost of treating chronic conditions is increasing and doctor shortages are imminent worldwide, the needed transformation in the structure of healthcare and medicine fails to catch up with the rapid progress of the medical technology industry. This transition is slowed down by strict regulations; the reluctance of stakeholders in healthcare to change; and ignoring the importance of cultural changes and the human factor in an increasingly technological world. With access and adoption of technology getting higher, the risk of patients primarily turning to an accessible, but unregulated technological solution for their health problem is likely to increase. In this paper, we discuss how the old paradigm of the paternalistic model of medicine is transforming into an equal level partnership between patients and professionals and how it is aided and augmented by disruptive technologies. We attempt to define what digital health means and how it affects the status quo of care and also the study design in implementing technological innovations into the practice of medicine.

Digital health is a cultural transformation of traditional healthcare

Science.gov (United States)

Drobni, Zsófia; Bényei, Éva; Gergely, Bence; Győrffy, Zsuzsanna

2017-01-01

Under the term “digital health”, advanced medical technologies, disruptive innovations and digital communication have gradually become inseparable from providing best practice healthcare. While the cost of treating chronic conditions is increasing and doctor shortages are imminent worldwide, the needed transformation in the structure of healthcare and medicine fails to catch up with the rapid progress of the medical technology industry. This transition is slowed down by strict regulations; the reluctance of stakeholders in healthcare to change; and ignoring the importance of cultural changes and the human factor in an increasingly technological world. With access and adoption of technology getting higher, the risk of patients primarily turning to an accessible, but unregulated technological solution for their health problem is likely to increase. In this paper, we discuss how the old paradigm of the paternalistic model of medicine is transforming into an equal level partnership between patients and professionals and how it is aided and augmented by disruptive technologies. We attempt to define what digital health means and how it affects the status quo of care and also the study design in implementing technological innovations into the practice of medicine. PMID:29184890

G-Quadruplex conformational change driven by pH variation with potential application as a nanoswitch.

Science.gov (United States)

Yan, Yi-Yong; Tan, Jia-Heng; Lu, Yu-Jing; Yan, Siu-Cheong; Wong, Kwok-Yin; Li, Ding; Gu, Lian-Quan; Huang, Zhi-Shu

2013-10-01

G-Quadruplex is a highly polymorphic structure, and its behavior in acidic condition has not been well studied. Circular dichroism (CD) spectra were used to study the conformational change of G-quadruplex. The thermal stabilities of the G-quadruplex were measured with CD melting. Interconversion kinetics profiles were investigated by using CD kinetics. The fluorescence of the inserted 2-Aminopurine (Ap) was monitored during pH change and acrylamide quenching, indicating the status of the loop. Proton NMR was adopted to help illustrate the change of the conformation. G-Quadruplex of specific loop was found to be able to transform upon pH variation. The transformation was resulted from the loop rearrangement. After screening of a library of diverse G-quadruplex, a sequence exhibiting the best transformation property was found. A pH-driven nanoswitch with three gears was obtained based on this transition cycle. Certain G-quadruplex was found to go through conformational change at low pH. Loop was the decisive factor controlling the interconversion upon pH variation. G-Quadruplex with TT central loop could be converted in a much milder condition than the one with TTA loop. It can be used to design pH-driven nanodevices such as a nanoswitch. These results provide more insights into G-quadruplex polymorphism, and also contribute to the design of DNA-based nanomachines and logic gates. © 2013.

CONVERGENT (NBIC TECHNOLOGIES: PROBLEMS OF DEVELOPMENT AND TRANSFORMATIONAL POTENTIAL

Directory of Open Access Journals (Sweden)

И В Данилин

2017-12-01

Full Text Available Modern innovation policy is formed under strong influence of disruptive technologies con-cepts, which help mobilize support for Science and Technology (S&T policy, structure international S&T cooperation and system, etc. They are also important for the global processes, promising changes in leading powers cohort. This is why disruptive technology concepts are accented by the emerging economics, especially by BRIC nations. A concept of converging (or nano-bio-info-cognitive, also known as NBIC technologies is very illustrative. Being originally a part of the USA nanotechnology policy and transhumanistic discourse, it gradually evolved globally with focus on “Grand Challenges”. But, despite successes of technology convergence since 2000s, concept itself proved to be not fully operational, being mostly a metaphor for rising interdisciplinarity and discipline convergence. Nonetheless its revolutionary potential was meaningful, but linked not to technological, but institu-tional and socio-cultural dimensions. Among them were human capital development, changing logic of S&T organization, reforming S&T policies, formation of new culture and ethics of research and development, systemic development of national innovation systems. These ideas, implicitly present in the NBIC concept, were of a special importance for the emerging economies as key factors for their enforced growth and rising quality of development processes. But these issues were surprisingly weak articulated in NBIC concept. Partly that was the influence of transhumanist discourse with its escape from solving societal challenges by technological change of human self. Not less important was that NBIC were seen by elites as a mean to bypass deep reforms and buildup of innovation institutions. I.e., concepts of disruptive technologies represent a psychological sub-stitute for a really intense development. Uniqueness of NBIC is that it makes this contradiction very visible. As shown in

Fenton-driven regeneration of MTBE-spent granular activated carbon - Effects of particle size and Iron Amendment Procedures

Science.gov (United States)

Fenton-driven regeneration of spent granular activated carbon (GAC) is a technology being developed to regenerate organic contaminant-spent GAC. Here, the effect of GAC particle size (>2 mm to <0.35 mm) on Fenton-driven oxidation of methyl tert-butyl ether (MTBE)-spent GAC was ev...