WorldWideScience

Sample records for tramway worksite edges

  1. The tramway worksite edges ever closer to CERN

    CERN Multimedia

    DG Unit

    2009-01-01

    You will have probably noticed that worksite machinery has been installed opposite CERN’s Gate A. They are carrying out work in preparation for the major tramway worksite that is due to reach CERN in a few weeks’ time. This preliminary work should cause no disruption to traffic. Full information on the tramway worksite adjacent to CERN’s Meyrin site will be published in forthcoming issues of the Bulletin. The traffic arrangements on the outskirts of Meyrin village will be modified with effect from 2 February. The section of the Route de Meyrin between the Avenue de Vaudagne and the roundabout at the intersection with Avenue J.-D.-Maillard/Chemin de la Planche will be closed off to traffic. Access to the Hôpital de la Tour will remain unchanged. Diversion signs to the centre of the village will be in operation. More information at http://www.way-tram.ch

  2. Tramways; Tramways

    Energy Technology Data Exchange (ETDEWEB)

    Muller, G. [Compagnie des Transports Strasbourgeois, 67 (France)

    2000-08-01

    After a long period of decline, the development of tramway networks is on the rise again, in particular in countries where they have practically disappeared. The come-back of tramways is in general linked with huge urbanism operations. This paper gives a synthesis of the technologies used in the construction and exploitation of modern networks and presents all kind of tramways built during the last ten years and those expected in the forthcoming years. Tramways are more and more becoming a substitute to some regional trains because they are more economical and they allow a direct link between regions and town centers ('tram-train'). The following points are developed in the paper: success of new networks, exploitation, centralized control post, exploitation-aided system, centralized technical management, passengers information, signposting, maintenance (tramways, fixed installations), infrastructures (railways, laying out, disposition), aerial lines, power supplies, rolling equipment, all kinds of tramways, tram-trains, light metros, aesthetics, trends. (J.S.)

  3. TRAMWAY MANAGEMENT SYSTEM IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Melia Damayanti

    2015-01-01

    Full Text Available Tramway systems, which can carry more passengers than buses at one haul, are now being proposed to meet Indonesia’s public transport requirement. The objective of this research is to analyze the management structures for operating tram in different countries and then propose a suitable organizational structure for operating trams, if re-introduced, in Indonesia. The author chose France (Montpellier tramway, Germany (Karlsruhe tram-train and the UK (Nottingham Express Transit as the role model countries for investigation. From the analysis, the most appropriate organizational structure and suitable tramway management structure for operating tramways implementation in Indonesia. The key features of the research are to establish public transport company by local government to manage all public transport systems, propose tramway construction and operation to exist as separate departments under the tramway team division of the public company, recommend the public transport company to have responsibility for overseeing construction of the trams, operating, and maintaining the trams, suggest local government to own them and have responsibility for tramway strategic policy, control regulation as well as supervision and coordination of the performance of the public transport company, propose joint working between public and private sectors.

  4. The Port Elizabeth Electric Tramway Case: Is the Meaning Ascribed ...

    African Journals Online (AJOL)

    The Port Elizabeth Electric Tramway Case: Is the Meaning Ascribed to the Phrase “In the Production of the Income” By Watermeyer AJP in the Port Elizabeth Electric Tramway Case Still Religiously Followed Today?

  5. The renaissance of tramways and urban redevelopment in France

    Directory of Open Access Journals (Sweden)

    Boquet Yves

    2017-03-01

    Full Text Available Tramways have made a remarkable comeback in France since the 1980s. An organization of public transport based on the decentralized administration system set up in the early 1980s has allowed local urban authorities to make their own choices to develop public transport networks in the context of automobile domination. As in many other countries, worries about fossil fuel dependency and demands concerning sustainable urban development appear as strong elements in favour of urban light rail. However, in France, tramways are not just technical solutions for traffic congestion, they have also become a symbol of a cultural mutation in urban development planning. Coupled with a national political push for a more inclusive city in social terms, tramways are the backbone of contemporary urban policies, in a French version of transit-oriented development (TOD, especially for mid-size cities.

  6. Real-Time Integrated Re-scheduling for Tramway Operations

    NARCIS (Netherlands)

    Cheung, Kam-Fung; Kuo, Yong-Hong; Lai, S.W.; Leung, Janny M.Y.

    2018-01-01

    Our work aims to develop practical solution approaches for real-time dispatch of crews and vehicles for disruption management. The practical motivation for our research arose from the operations of a public tramway system in Hong Kong. The tram system shares the road with other vehicular traffic in

  7. Integration of Photovoltaic Plants and Supercapacitors in Tramway Power Systems

    Directory of Open Access Journals (Sweden)

    Flavio Ciccarelli

    2018-02-01

    Full Text Available The growing interest in the use of energy storage systems to improve the performance of tramways has prompted the development of control techniques and optimal storage devices, displacement, and sizing to obtain the maximum profit and reduce the total installation cost. Recently, the rapid diffusion of renewable energy generation from photovoltaic panels has also created a large interest in coupling renewable energy and storage units. This study analyzed the integration of a photovoltaic power plant, supercapacitor energy storage system, and railway power system. Random optimization was used to verify the feasibility of this integration in a real tramway electric system operating in the city of Naples, and the benefits and total cost of this integration were evaluated.

  8. 30 CFR 77.1602 - Use of aerial tramways to transport persons.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Use of aerial tramways to transport persons. 77.1602 Section 77.1602 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL... UNDERGROUND COAL MINES Loading and Haulage § 77.1602 Use of aerial tramways to transport persons. Persons...

  9. A socio-economic history of the public passenger tramways of Kimberley: 1880-2000

    OpenAIRE

    2008-01-01

    This study examines, in some depth, the rationale behind the tramway development that occurred in Kimberley. It also looks at the socio-economic impact that the tramways had on Kimberley’s development and growth, covering the period from 1880 to 2000. After the introduction in Chapter 1, Chapter 2 looks at the overall evolution of tramway development in America, Britain and Europe, with a brief outline of its rise, decline and slow return to favour, which has seen the re-emergence of the tram...

  10. Hybrid electric system based on fuel cell and battery and integrating a single dc/dc converter for a tramway

    International Nuclear Information System (INIS)

    Fernandez, Luis M.; Garcia, Pablo; Garcia, Carlos Andres; Jurado, Francisco

    2011-01-01

    Research highlights: → Hybrid electric power system for a real surface tramway. → Hybrid system based on PEM fuel cell with dc/dc converter and Ni-MH battery. → New control strategy for the energy management of the tramway. → Hybrid system demonstrated to meet appropriate driving cycle of the tramway. -- Abstract: This paper presents a hybrid electric power system for a real surface tramway. The hybrid system consists of two electrical energy sources integrating a single dc/dc converter to provide the power demanded by the tramway loads (four electric traction motors and auxiliary services): (1) a Polymer Electrolyte Membrane (PEM) fuel cell (FC) as the primary and (2) a rechargeable Ni-MH battery as electrical energy storage to supplement the FC over the driving cycle. According to the requirements of the real driving cycle of the tramway, it was considered a 200 kW PEM FC system with two FCs connected in parallel and a 34 Ah Ni-MH battery. The PEM FC and Ni-MH battery models were designed from commercially available components. The power conditioning system provides the appropriate power for the tramway. It is composed of: (1) a unique dc/dc boot converter which adapts the FC output voltage to the 750 V traction standard dc bus; (2) three phase inverters to drive properly each electric motors; and (3) a braking chopper to dissipate excess of regenerative braking energy. Suitable state machine control architecture is presented for the hybrid system, its objective being to provide demanded power by the driving cycle, optimizing the energy generated. Following this objective, a new state machine control strategy based on eight states decides the operating point of each component of the system and a cascade control structure allows achieving the operating points determined by the strategy. Simulation results of the real driving cycle of the tramway check the adequacy of the hybrid electric power system.

  11. Hybrid electric system based on fuel cell and battery and integrating a single dc/dc converter for a tramway

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Luis M., E-mail: luis.fernandez@uca.e [Department of Electrical Engineering, EPS Algeciras, University of Cadiz, Avda. Ramon Puyol, s/n. 11202 Algeciras (Cadiz) (Spain); Garcia, Pablo, E-mail: pablo.garcia@uca.e [Department of Electrical Engineering, EPS Algeciras, University of Cadiz, Avda. Ramon Puyol, s/n. 11202 Algeciras (Cadiz) (Spain); Garcia, Carlos Andres, E-mail: carlosandres.garcia@uca.e [Department of Electrical Engineering, EPS Algeciras, University of Cadiz, Avda. Ramon Puyol, s/n. 11202 Algeciras (Cadiz) (Spain); Jurado, Francisco, E-mail: fjurado@ujaen.e [Department of Electrical Engineering, EPS Linares, University of Jaen, C/Alfonso X, No. 28. 23700 Linares (Jaen) (Spain)

    2011-05-15

    Research highlights: {yields} Hybrid electric power system for a real surface tramway. {yields} Hybrid system based on PEM fuel cell with dc/dc converter and Ni-MH battery. {yields} New control strategy for the energy management of the tramway. {yields} Hybrid system demonstrated to meet appropriate driving cycle of the tramway. -- Abstract: This paper presents a hybrid electric power system for a real surface tramway. The hybrid system consists of two electrical energy sources integrating a single dc/dc converter to provide the power demanded by the tramway loads (four electric traction motors and auxiliary services): (1) a Polymer Electrolyte Membrane (PEM) fuel cell (FC) as the primary and (2) a rechargeable Ni-MH battery as electrical energy storage to supplement the FC over the driving cycle. According to the requirements of the real driving cycle of the tramway, it was considered a 200 kW PEM FC system with two FCs connected in parallel and a 34 Ah Ni-MH battery. The PEM FC and Ni-MH battery models were designed from commercially available components. The power conditioning system provides the appropriate power for the tramway. It is composed of: (1) a unique dc/dc boot converter which adapts the FC output voltage to the 750 V traction standard dc bus; (2) three phase inverters to drive properly each electric motors; and (3) a braking chopper to dissipate excess of regenerative braking energy. Suitable state machine control architecture is presented for the hybrid system, its objective being to provide demanded power by the driving cycle, optimizing the energy generated. Following this objective, a new state machine control strategy based on eight states decides the operating point of each component of the system and a cascade control structure allows achieving the operating points determined by the strategy. Simulation results of the real driving cycle of the tramway check the adequacy of the hybrid electric power system.

  12. The effect of the tramway track construction on the aerosol pollution in Debrecen, Hungary

    Energy Technology Data Exchange (ETDEWEB)

    Furu, E. [Hungarian Academy of Science Institute for Nuclear Research, Laboratory of Ion Beam Applications, H-4026 Debrecen, Bem tér 18/C (Hungary); Katona-Szabo, I. [University of Debrecen, P.O. Box 51, H-4001 Debrecen (Hungary); Angyal, A.; Szoboszlai, Z.; Török, Zs.; Kertész, Zs. [Hungarian Academy of Science Institute for Nuclear Research, Laboratory of Ion Beam Applications, H-4026 Debrecen, Bem tér 18/C (Hungary)

    2015-11-15

    In this study the effect of a new tramway track construction on the atmospheric aerosol concentration and composition in Debrecen, Hungary, was investigated. The tramway track construction started in 2011 and it was finished in 2013. PM{sub 2.5} and PM{sub 10} daily samples were collected with a Gent type filter unit in an urban background site 2 times a week. In addition, a sampling campaign direct next to the construction site was performed with 2-stage personal samplers between the 21{sup st} and 30{sup th} of September, 2011 – four hours a day, during working hours. We studied the change in concentration and composition of fine and coarse fraction aerosol in comparison with the average of the past 5 years. An additional goal was to investigate the personal aerosol exposure near to the construction sites. In the urban background site a significant increase could be observed both for the PM{sub 2.5} and PM{sub 10} concentrations for 2012 and 2013. In the elemental composition the concentration of Fe, Mn, Ni, and Cr increased significantly for the construction period. The PM{sub 10} concentrations measured direct next to the construction site were 10–20 higher than those measured at our urban background site or the data provided by the Hungarian Air Quality monitoring network. Days with very high Pb pollution level (∼3000 ng/m{sup 3}) was also recorded.

  13. Effectiveness of worksite physical activity counseling

    NARCIS (Netherlands)

    Proper, K.I.

    2003-01-01

    The aim of this thesis was to describe the effectiveness of a particular worksite physical activity intervention involving individual counseling of workers. First, a summary of the existing literature is given as to the effectiveness of worksite physical activity programs. A strong evidence was

  14. Masculinity’s Transformations of the Tramways Workers in Guadalajara, during the Porfiriato

    Directory of Open Access Journals (Sweden)

    Cristina Alvizo Carranza

    2017-07-01

    Full Text Available Masculinities and feminities are changing constantly. During Porfiriato (1876-1911 and with its modernization period, the ideas of what makes male a man changed and aimed to refined, neat and tidy, and well-mannered men. These new ways to be a man were confronted and combined with the 'macho' stereotype. In this paper, through actor’s images and narratives, are analyzed how the ideals of a "porfiriano modern man" were created (clean, polite, hardworking and good father and how these ideals had a profound impact on the masculinities of a men working group in Guadalajara, the tramways workers, who represented a key to the development of the city.

  15. A practical approach to tramway track condition monitoring: vertical track defects detection and identification using time-frequency processing technique

    Directory of Open Access Journals (Sweden)

    Bocz Péter

    2018-03-01

    Full Text Available This paper presents an automatic method for detecting vertical track irregularities on tramway operation using acceleration measurements on trams. For monitoring of tramway tracks, an unconventional measurement setup is developed, which records the data of 3-axes wireless accelerometers mounted on wheel discs. Accelerations are processed to obtain the vertical track irregularities to determine whether the track needs to be repaired. The automatic detection algorithm is based on time–frequency distribution analysis and determines the defect locations. Admissible limits (thresholds are given for detecting moderate and severe defects using statistical analysis. The method was validated on frequented tram lines in Budapest and accurately detected severe defects with a hit rate of 100%, with no false alarms. The methodology is also sensitive to moderate and small rail surface defects at the low operational speed.

  16. Lung and bladder cancer among Danish urban bus drivers and tramway employees: a nested case-control study.

    Science.gov (United States)

    Soll-Johanning, Helle; Bach, Elsa; Jensen, Steen S

    2003-02-01

    The combustion of fossil fuels produces small amounts of mutagenic and carcinogenic compounds. We investigated the association between employment and lung and bladder cancer in Danish bus drivers and tramway employees. We carried out a nested case-control study of 153 lung and 84 bladder cancer cases, and 606 controls sampled in a cohort of 18 174 bus drivers or tramway employees employed in Copenhagen during the period 1900-1994. The cases and controls or their next of kin were interviewed about smoking, along with occupational and residential history. An exposure index based on which bus routes the bus drivers had mainly been driving was established. Relative risks (RRs) were estimated by conditional logistic regression. The analysis showed decreasing risk for lung cancer with increasing years of employment as a bus driver (RR = 0.97 for each added year, 95% confidence interval = 0.96-0.99). The air pollution index based on main bus for the bus drivers showed no positive correlation with risk.

  17. Measurement and Analysis of Magnetic Field Radiated from D.C. Tramway: A case study for Tunis’s metro

    Directory of Open Access Journals (Sweden)

    J. Ben Hadj Slama

    2008-06-01

    Full Text Available High-power electrical drives, subsystems, and equipment mounted on board of rolling stock make the internal environment potentially harsh from the point of view of electromagnetic (EM field emissions. In particular, at low frequencies, electronically controlled power drive systems behave as effective emission sources. This paper deals with characterization of electromagnetic field radiated from D.C. railway systems. The D.C. railway system of Tunis’s urban electric metro is described. The magnetic field is measured at different points inside and near the moving D.C. train. Measurement results are presented and analyzed. Analysis of measurement results shows that, within frequency range 100kHz-20MHz, the radiated magnetic field is coming from power electronic systems embedded on the train. In particular, choppers, D.C. motors and their connecting cables represent the most important emitting source of magnetic field in the D.C. tramway.

  18. Self-insurance and worksite alcohol programs: an econometric analysis.

    Science.gov (United States)

    Kenkel, D S

    1997-03-01

    The worksite is an important point of access for alcohol treatment and prevention, but not all firms are likely to find offering alcohol programs profitable. This study attempts to identify at a conceptual and empirical level factors that are important determinants of the profitability of worksite alcohol programs. A central question considered in the empirical analysis is whether firms' decisions about worksite alcohol programs are related to how employee group health insurance is provided. The data used are from the 1992 National Survey of Worksite Health Promotion Activities (N = 1,389-1,412). The econometric analysis focuses on measures of whether the surveyed firms offer Employee Assistance Programs (EAPs), individual counseling, group classes and resource materials regarding alcohol and other substance abuse. Holding other factors constant, the probability that a self-insured firm offers an EAP is estimated to be 59%, compared to 51% for a firm that purchases market group health insurance for its employees. Unionized worksites and larger worksites are also found to be more likely to offer worksite alcohol programs, compared to nonunionized smaller worksites. Worksites with younger work-forces are less likely than those with older employees to offer alcohol programs. The empirical results are consistent with the conceptual framework from labor economics, since self-insurance is expected to increase firms' demand for worksite alcohol programs while large worksite is expected to reduce the average program cost. The role of union status and workforce age suggests it is important to consider workers' preferences for the programs as fringe benefits. The results also suggest that the national trend towards self-insurance may be leading to more prevention and treatment of worker alcohol-related problems.

  19. A review of the knowledge base on healthy worksite culture.

    Science.gov (United States)

    Aldana, Steven G; Anderson, David R; Adams, Troy B; Whitmer, R William; Merrill, Ray M; George, Victoria; Noyce, Jerry

    2012-04-01

    To identify the need for worksite cultures of health, the organizational factors that support worksite cultures of health, the tools that have been used to measure worksite cultures of health, and the research needs related to healthy worksite culture. A cross-sectional survey involving a sample of 500 companies representing a broad spectrum of industries and business sectors. A literature review was conducted. Similar to a culture of safety that encourages safer behaviors and enables a safer workplace, a culture of health provides a supportive work leadership with a favorable work environment and health-related policies that promote employee health and result in substantial decrease in employee health risks and medical costs. Worksite policies and environments supporting a culture of health are important to helping employees adopt and maintain healthy behaviors.

  20. Ethical considerations of worksite health promotion: an exploration of stakeholders’ views

    OpenAIRE

    van Berkel, Jantien; Meershoek, Agnes; Janssens, Rien MJPA; Boot, Cécile RL; Proper, Karin I; van der Beek, Allard J

    2014-01-01

    Background: Developing, implementing and evaluating worksite health promotion requires dealing with all stakeholders involved, such as employers, employees, occupational physicians, insurance companies, providers, labour unions and research and knowledge institutes. Although worksite health promotion is becoming more common, empirical research on ethical considerations of worksite health promotion is scarce. Methods. We explored the views of stakeholders involved in worksite health promotion ...

  1. A sensitivity-based approach to optimize the surface treatment of a low-height tramway noise barrier

    Science.gov (United States)

    Jolibois, Alexandre

    Transportation noise has become a main nuisance in urban areas, in the industrialized world and across the world, to the point that according to the World Health Organization 65% of the European population is exposed to excessive noise and 20% to night-time levels that may harm their health. There is therefore a need to find new ways to mitigate transportation noise in urban areas. In this work, a possible device to achieve this goal is studied: a low-height noise barrier. It consists of a barrier typically less than one meter high placed close to the source, designed to decrease significantly the noise level for nearby pedestrians and cyclists. A numerical method which optimizes the surface treatment of a low-height barrier in order to increase its insertion loss is presented. Tramway noise barriers are especially studied since the noise sources are in this case close to the ground and would be attenuated more by the barrier. The acoustic behavior of the surface treatment is modeled via its admittance. It can be itself described by a few parameters (flow resistivity, geometrical dimensions...), which can then be optimized. It is proposed to couple porous layers and micro-perforated panel (MPP) resonators in order to take advantage of their different acoustic properties. Moreover, the optimization is achieved using a sensitivity-based method, since in this framework the gradient of the attenuation can be evaluated accurately and efficiently. Several shapes are considered: half-cylinder, quarter-cylinder, straight wall, T-shape and square shape. In the case of a half-cylindrical geometry, a semi-analytical solution for the sound field in terms of a series of cylindrical waves is derived, which simplifies the sensitivity calculation and optimization process. The boundary element method (BEM) is used to evaluate the attenuation for the remaining shapes, and in this case the sensitivity is evaluated using the adjoint state approach. For all considered geometries, it is

  2. Using Augmented Reality to Plan Virtual Construction Worksite

    Directory of Open Access Journals (Sweden)

    Xiangyu Wang

    2007-12-01

    Full Text Available Current construction worksite layout planning heavily relies on 2D paper media where the worksite planners sketch the future layout adjacent to their real environment. This traditional approach turns out to be ineffective and prone to error because only experienced and well-trained planners are able to generate the effective layout design with paper sketch. Augmented Reality (AR, as a new user interface technology, introduces a completely new perspective for construction worksite planning. This paper disucsses the related AR work and issues in construction and describes the concept and prototype of an AR-based construction planning tool, AR Planner with virtual elements sets and tangible interface. The focus of the paper is to identify and integrate worksite planning rules into the AR planner with the purpose of intelligently preventing potential planning errors and process inefficiency, thus maximizing the overall productivity. Future work includes refining and verifying AR Planner in realistic projects.

  3. Using Augmented Reality to Plan Virtual Construction Worksite

    Directory of Open Access Journals (Sweden)

    Xiangyu Wang

    2008-11-01

    Full Text Available Current construction worksite layout planning heavily relies on 2D paper media where the worksite planners sketch the future layout adjacent to their real environment. This traditional approach turns out to be ineffective and prone to error because only experienced and well-trained planners are able to generate the effective layout design with paper sketch. Augmented Reality (AR, as a new user interface technology, introduces a completely new perspective for construction worksite planning. This paper disucsses the related AR work and issues in construction and describes the concept and prototype of an AR-based construction planning tool, AR Planner with virtual elements sets and tangible interface. The focus of the paper is to identify and integrate worksite planning rules into the AR planner with the purpose of intelligently preventing potential planning errors and process inefficiency, thus maximizing the overall productivity. Future work includes refining and verifying AR Planner in realistic projects.

  4. Working on wellness (WOW): a worksite health promotion intervention programme

    NARCIS (Netherlands)

    Kolbe-Alexander, T.L.; Proper, K.I.; Lambert, E.V.; van Wier, M.F.; van Wier, M.F.; Pillay, J.; Nossel, C.; Adonis, L.; van Mechelen, W.

    2012-01-01

    Background: Insufficient PA has been shown to cluster with other CVD risk factors including insufficient fruit and vegetable intake, overweight, increased serum cholesterol concentrations and elevated blood pressure. This paper describes the development of Working on Wellness (WOW), a worksite

  5. Death at the Worksite: Helping Grieving Family Members

    Science.gov (United States)

    ... Grief at Work Working Through Grief About Us Death at the Worksite: Helping Grieving Family Members By ... fatal heart attacks occur in the workplace. Other deaths — from accidents, for example — can also happen during ...

  6. 24 CFR 35.1345 - Occupant protection and worksite preparation.

    Science.gov (United States)

    2010-04-01

    ... other safety, health or environmental hazards (e.g., exposed live electrical wiring, release of toxic... areas, and bathroom and kitchen facilities. (3) The dwelling unit and the worksite shall be secured...

  7. Potentials for health promotion at worksite

    DEFF Research Database (Denmark)

    Nygaard, Rikke; Mikkelsen, Bent Egberg

    2013-01-01

    but also with the social and mental environment. Food and eating has increasingly become an object of public governance, especially when we are eating out of home as part of our work or educational life. Interventions aiming at improve our eating patterns have become mainstream in many of our everyday life......Eating has an immense impact on our health, and the contribution of research literature that tries to understand and explain our food habits has grown considerably over the past decades. These studies have showed that in our eating behaviour, we interact not only with the physical environment...... settings. This paper explores differences and similarities in the foodscapes of bus drivers in a multi-ethnic worksite. Our objective is to identify possibilities for creating healthier food environments and provide opportunities for healthy living. We will analyse how different ethnicities perceive...

  8. A Review of Worksite Lactation Accommodations.

    Science.gov (United States)

    Hilliard, Elizabeth Dianne

    2017-01-01

    The purpose of this review was to examine workplace lactation accommodations, and their association with breastfeeding duration, and identify strategies occupational health professionals can use to promote lactation improvements. This study included literature published from 1985 through 2015 and listed in PubMed and CINAHL. Using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA), 11 articles were identified for review. Presence of a corporate lactation program, on-site child care, and return to work/telephone lactation consultation were consistently associated with breastfeeding at 6 months. Other breastfeeding accommodations (i.e., lactation spaces, lactation breaks, worksite lactation policies, and supervisor/coworker support) were not consistently associated with breastfeeding duration. Occupational health professionals can play key roles in improving the effectiveness of lactation accommodations. Assuring adequate implementation of accommodations, increasing communication and marketing of accommodations, and promoting supervisor and coworker support are areas that occupational health professionals should explore for improving lactation duration.

  9. Worksite health promotion programs in college settings

    Science.gov (United States)

    Hill-Mey, Patricia E.; Kumpfer, Karol L.; Merrill, Ray M.; Reel, Justine; Hyatt-Neville, Beverly; Richardson, Glenn E.

    2015-01-01

    The purpose of this paper is to describe the multifaceted nature and benefits of worksite health promotion programs (WHPPs), with emphasis on the college setting. An assessment of the peer-reviewed literature was conducted of articles published since 2000. Several search engines were accessed and selected key words were used. Most studies examining WHPPs have focused on return on investment and productivity. Research that targets the softer side-benefits of health promotion programs in the workplace is less available. Although the college setting offers some advantages for implementing health promotion programs. They may also have unique challenges due to their large and diverse employee population. There is little research to show the effectiveness and unique challenges of college-based health promotion programs. PMID:25861657

  10. Vending Assessment and Program Implementation in Four Iowa Worksites.

    Science.gov (United States)

    Lillehoj, Catherine J; Nothwehr, Faryle; Shipley, Kala; Voss, Carol

    2015-11-01

    The worksite food environment, including vending options, has been explored as an important contributor to dietary decisions made every day. The current study describes the vending environment, and efforts to change it, in four Iowa worksites using a series of case studies. Data were gathered by local coordinators as part of the Iowa Community Transformation Grant project. Data were collected from three sources. First, the Nutrition Environment Measures Survey-Vending was used to assess healthy vending options in worksite machines before and after the intervention. Second, employee vending behavior was evaluated with a pre-, post-intervention survey. Items assessed attitudes and behaviors regarding vending, plus awareness and reaction to intervention activities. Third, program coordinators documented vending machine intervention strategies used, such as social marketing materials and product labels. The Nutrition Environment Measures Survey-Vending documented that the majority of vending options did not meet criteria for healthfulness. The vending survey found that employees were generally satisfied with the healthier items offered. Some differences were noted over time at the four worksites related to employee behavior and attitudes concerning healthy options. There were also differences in intervention implementation and the extent of changes made by vending companies. Overall, findings demonstrate that a large percentage of employees are constrained in their ability to access healthy foods due to limited worksite vending options. There also remain challenges to making changes in this environment. Findings have implications for public health practitioners to consider when designing healthy vending interventions in worksites. © 2015 Society for Public Health Education.

  11. Development of master-slave energy management strategy based on fuzzy logic hysteresis state machine and differential power processing compensation for a PEMFC-LIB-SC hybrid tramway

    International Nuclear Information System (INIS)

    Peng, Fei; Zhao, Yuanzhe; Li, Xiaopeng; Liu, Zhixiang; Chen, Weirong; Liu, Yang; Zhou, Donghua

    2017-01-01

    Highlights: •A power system model for the PEMFC based commercial hybrid tramway was established. •An energy management strategy based on master FuHSM and slave DPPC was proposed. •The optimal OER operation of PEMFC subsystem was achieved. •The real-time EMS based HCM optimization was achieved. •The influence on system fuel economy and PEMFC performance degradation was verified. -- Abstract: A hybrid power system configuration based on proton exchange membrane fuel cell (PEMFC), lion-lithium battery (LIB) and supercapacitor (SC) was designed without grid connection for the hybrid tramway. To adapt to the rapid load power change and achieve higher fuel efficiency and optimal oxygen excess ratio (OER) operation of the PEMFC power subsystem, a master-slave energy management strategy based on fuzzy logic hysteresis state machine (FuHSM) and differential power processing compensation (DPPC) was proposed for the hybrid tramway, effectively taking into consideration of the dynamic response and optimum OER tracing of the integrated PEMFC subsystem. The master FuHSM controller was utilized to grantee the optimal power coordination of the multiple power sources and the slave DPPC controller was responsible for further compensating the load power demand to enhance the dynamic performance and bus voltage stability. Furthermore, the equivalent H 2 consumption minimization optimization considering characteristics of the proposed energy management strategy was realized by means of EIA-PSO algorithm to further improve the fuel economy of the overall hybrid power system. The results demonstrate that the proposed energy management strategy can guarantee the stability of the hybrid power system throughout the driving cycle. In addition, more efficient power coordination dynamics among the PEMFC, LIB and SC subsystems could be achieved without additional performance degradation of the integrated PEMFC subsystem, and the results of the comparisons with other control strategies

  12. Ethical considerations of worksite health promotion: an exploration of stakeholders' views

    NARCIS (Netherlands)

    van Berkel, J.; Meershoek, A.; Janssens, M.J.P.A.; Boot, C.R.L.; Proper, K.I.; van der Beek, A.J.

    2014-01-01

    Background: Developing, implementing and evaluating worksite health promotion requires dealing with all stakeholders involved, such as employers, employees, occupational physicians, insurance companies, providers, labour unions and research and knowledge institutes. Although worksite health

  13. Eating at worksites in Nordic countries: national experiences and policy initiatives

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Arsky, Gunn Helene; Brandhøj, Mia

    2010-01-01

    of dietary habits of the employees and some experiments with healthier worksite eating schemes. Blue-collar employees, employees with working hours outside normal working hours and employees with shifting worksites are likely to be offered less organised and less healthy food schemes. Worksites experiments...

  14. Effects of a worksite tobacco control intervention in India: the Mumbai worksite tobacco control study, a cluster-randomised trial.

    Science.gov (United States)

    Sorensen, Glorian; Pednekar, Mangesh; Cordeira, Laura Shulman; Pawar, Pratibha; Nagler, Eve M; Stoddard, Anne M; Kim, Hae-Young; Gupta, Prakash C

    2017-03-01

    We assessed a worksite intervention designed to promote tobacco control among workers in the manufacturing sector in Greater Mumbai, India. We used a cluster-randomised design to test an integrated health promotion/health protection intervention, the Healthy, Safe, and Tobacco-free Worksites programme. Between July 2012 and July 2013, we recruited 20 worksites on a rolling basis and randomly assigned them to intervention or delayed-intervention control conditions. The follow-up survey was conducted between December 2013 and November 2014. The difference in 30-day quit rates between intervention and control conditions was statistically significant for production workers (OR=2.25, p=0.03), although not for the overall sample (OR=1.70; p=0.12). The intervention resulted in a doubling of the 6-month cessation rates among workers in the intervention worksites compared to those in the control, for production workers (OR=2.29; p=0.07) and for the overall sample (OR=1.81; p=0.13), but the difference did not reach statistical significance. These findings demonstrate the potential impact of a tobacco control intervention that combined tobacco control and health protection programming within Indian manufacturing worksites. NCT01841879. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  15. Physical Activity for Campus Employees: A University Worksite Wellness Program.

    Science.gov (United States)

    Butler, Carling E; Clark, B Ruth; Burlis, Tamara L; Castillo, Jacqueline C; Racette, Susan B

    2015-04-01

    Workplaces provide ideal environments for wellness programming. The purpose of this study was to explore exercise self-efficacy among university employees and the effects of a worksite wellness program on physical activity, cardiorespiratory fitness, and cardiovascular disease (CVD) risk factors. Participants included 121 university employees (85% female). The worksite wellness program included cardiovascular health assessments, personal health reports, 8 weeks of pedometer-based walking and tracking activities, and weekly wellness sessions. Daily step count was assessed at baseline, Week 4, and Week 8. Exercise self-efficacy and CVD risk factors were evaluated at baseline and follow-up. Daily step count increased from 6566 ± 258 (LSM ± SE) at baseline to 8605 ± 356 at Week 4 and 9107 ± 388 at Week 8 (P physical activity, cardiorespiratory fitness, and CVD risk factors among university employees. Exercise barriers and outcome expectations were identified and have implications for future worksite wellness programming.

  16. Can worksite nutritional interventions improve productivity and firm profitability?

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård

    2011-01-01

    ’ nutritional knowledge, food intake and health and on the firm’s profitability, mainly in terms of reduced absenteeism and presenteeism. Conclusions: Well-targeted and efficiently implemented diet-related worksite health promotion interventions may improve labour productivity by 1%–2%. On larger worksites......Aims: This paper investigates whether and how worksite nutrition policies can improve employee productivity. Methods: The questions are pursued through a literature review, including a systematic search of literature – combined with literature identified from backward references – on randomized......, such productivity gains are likely to more than offset the costs of implementing such interventions. These conclusions are subject to some uncertainty due to the relatively limited amount of literature in the field....

  17. Physical Fitness Programs in the Workplace. WBGH Worksite Wellness Series.

    Science.gov (United States)

    Knadler, Gary F.; And Others

    Because sedentary living creates health consequences that ultimately affect employees' productivity, many companies are sponsoring worksite physical fitness programs for their employees. The cost-effectiveness of such programs and the resulting reduction in employees' absenteeism rates and medical and health care costs have been well documented.…

  18. 76 FR 73647 - National Healthy Worksite Program; Information Webinar Series

    Science.gov (United States)

    2011-11-29

    ... seven locations where the program will take place and the criteria used for selection; and (2) the... more physically active, and offering more healthy food choices in worksite cafeterias and vending..., nutrition counseling/education, menu labeling on healthy foods, healthy foods in cafeterias and vending...

  19. Smoke-Free Worksites and Public Spaces in Cameroon | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Smoke-Free Worksites and Public Spaces in Cameroon. Existing data indicate a tobacco epidemic of the first order in Africa, but the rapid increase in tobacco consumption continues. This situation justifies the current project by Research for International Tobacco Control (RITC), an initiative of IDRC and the Bill and Melinda ...

  20. A worksite-based weight loss intervention for obesity prevention

    Science.gov (United States)

    Worksites are increasingly being used as locations for implementing healthy diet and weight loss interventions. Hence, there is an urgent need to identify programs that are both successful and sustainable. We conducted a 6-month pilot randomized controlled trial in overweight and obese employees a...

  1. Healthy meals at worksite canteens - Social shaping as a framework for understanding sustainable interventions

    DEFF Research Database (Denmark)

    Thorsen, Anne Vibeke

    The challenge of public health nutrition in relation to worksite settings is to improve access to healthier meal options – especially for the groups with a lower educational level. Strategies changing the dietary environment such as increasing the availability of healthy food and reducing barriers...... by the involved local actors' ideas of health and nutrition and also by their concepts of how these ideas interrelate with the worksite’s working conditions and working performance. A combination of a social shaping approach and a worksite policy process approach to the shaping and embedding of healthy worksite...... a crucial role. The results of this thesis point to the need for a more widespread implementation of strategies that promote healthier eating at worksite canteens. The results indicate that a worksite intervention needs to be tailored to the needs of the particular worksite environment in which...

  2. Port Elizabeth Electric Tramway

    African Journals Online (AJOL)

    kirstam

    10Key words: Section 11(a) of the Income Tax Act, “in the production of the ..... cost of the air ticket, irrespective of whether the taxpayer flies economy class ..... 1In Sub-Nigel Ltd v CIR61 the taxpayer company carried on the business of mining.

  3. Long-term sustainability of a worksite canteen intervention of serving more fruit and vegetables

    DEFF Research Database (Denmark)

    Thorsen, Anne Vibeke; Lassen, Anne Dahl; Tetens, Inge

    2010-01-01

    Objective: To analyse the 5-year sustainability of a worksite canteen intervention of serving more fruit and vegetables (F&V). Design: Average F&V consumption per customer per meal per day was assessed in five worksite canteens by weighing F&V served and subtracting waste. Data were collected by ...... where the participatory and empowering approach, self-monitoring, environmental change, dialogue with suppliers and networking among worksite canteens are applied....

  4. An Overview of State Policies Supporting Worksite Health Promotion Programs.

    Science.gov (United States)

    VanderVeur, Jennifer; Gilchrist, Siobhan; Matson-Koffman, Dyann

    2017-05-01

    Worksite health promotion (WHP) programs can reduce the occurrence of cardiovascular disease risk factors. State law can encourage employers and employer-provided insurance companies to offer comprehensive WHP programs. This research examines state law authorizing WHP programs. Quantitative content analysis. Worksites or workplaces. United States (and the District of Columbia). State law in effect in 2013 authorizing WHP programs. Frequency and distribution of states with WHP laws. To determine the content of the laws for analysis and coding, we identified 18 policy elements, 12 from the Centers for Disease Control and Prevention's Worksite Health ScoreCard (HSC) and 6 additional supportive WHP strategies. We used these strategies as key words to search for laws authorizing WHP programs or select WHP elements. We calculated the number and type of WHP elements for each state with WHP laws and selected two case examples from states with comprehensive WHP laws. Twenty-four states authorized onsite WHP programs, 29 authorized WHP through employer-provided insurance plans, and 18 authorized both. Seven states had a comprehensive WHP strategy, addressing 8 or more of 12 HSC elements. The most common HSC elements were weight management, tobacco cessation, and physical activity. Most states had laws encouraging the adoption of WHP programs. Massachusetts and Maine are implementing comprehensive WHP laws but studies evaluating their health impact are needed.

  5. Edge Matters

    DEFF Research Database (Denmark)

    Earon, Ofri

    2013-01-01

    of this container is to separate inside from outside and to protect and provide privacy, psychological as well as physical (Venturi, 1966). But, if dwelling phenomenon takes place both inside and outside the private house – why is the urban house an enclosed box? What is the differentiation between inside...... and outside the contemporary urban house? And what is the interplay between them? The research argues for re-thinking the edge zone between inside and outside the urban house. Therefore, although, residential buildings in the city are the objects of study, the focal point here is the edge zone along...... the building. The research explores and develops the architectural characteristics of correlations between the resident, the singular unit, the building and the given location at the edge zone. It approaches the edge zone of the urban house as a platform for dynamic interactions between these behaviours...

  6. Workforce gender, company size and corporate financial support are predictors of availability of healthy meals in Danish worksite canteens.

    Science.gov (United States)

    Thorsen, Anne Vibeke; Lassen, Anne Dahl; Andersen, Jens Strodl; Mikkelsen, Bent Egberg

    2009-11-01

    Environmental strategies at worksites may help consumers change dietary behaviour towards a more healthy diet. The present study aimed to evaluate the availability of healthy meal options at Danish worksite canteens and to identify predictors of worksite canteens providing healthy meals. A self-administered questionnaire was randomly mailed to 1967 worksite canteen managers. Besides information and characteristics about the canteen and the worksite, the canteen managers specified the menus available. Two different health groups (Healthy and Less Healthy) were defined in three different meal categories (Sandwiches, Hot meals and Salads) as well as a combined category (Combined) combining all the three meal categories. The characteristics of the worksites were compared with regard to the different health groups. Randomly selected Danish worksite canteens. 553 Danish worksite canteen managers replied, resulting in a response rate of 29 %. Only 12 % of the canteens applied to the Healthy group combining all the three meal categories. In particular, worksites with more than 75 % female employees served healthy menus on a frequent basis. The size of the worksite was positively correlated with more healthy meal options. Furthermore, the present study suggests a positive relationship between corporate financial support and the availability of healthy meal options. Among the selected variables studied, workforce gender, company size and corporate financial support were significant predictors of the availability of healthy meal options in worksite canteens. More research is needed on the role that variance in organisation environment plays for the potential of worksite intervention, to make a difference in terms of healthy eating.

  7. Worksite Opportunities for Wellness (WOW): effects on cardiovascular disease risk factors after 1 year.

    Science.gov (United States)

    Racette, Susan B; Deusinger, Susan S; Inman, Cindi L; Burlis, Tamara L; Highstein, Gabrielle R; Buskirk, Trent D; Steger-May, Karen; Peterson, Linda R

    2009-01-01

    To evaluate the effectiveness of a worksite health promotion program on improving cardiovascular disease risk factors. In St Louis, Missouri from 2005 to 2006, 151 employees (134 F, 17 M, 81% overweight/obese) participated in a cohort-randomized trial comparing assessments + intervention (worksite A) with assessments only (worksite B) for 1 year. All participants received personal health reports containing their assessment results. The intervention was designed to promote physical activity and favorable dietary patterns using pedometers, healthy snack cart, WeightWatchers(R) meetings, group exercise classes, seminars, team competitions, and participation rewards. Outcomes included BMI, body composition, blood pressure, fitness, lipids, and Framingham 10-year coronary heart disease risk. 123 participants, aged 45+/-9 yr, with BMI 32.9+/-8.8 kg/m(2) completed 1 year. Improvements (P< or =0.05) were observed at both worksites for fitness, blood pressure, and total-, HDL-, and LDL-cholesterol. Additional improvements occurred at worksite A in BMI, fat mass, Framingham risk score, and prevalence of the metabolic syndrome; only the changes in BMI and fat mass were different between worksites. A multi-faceted worksite intervention promoted favorable changes in cardiovascular disease risk factors, but many of the improvements were achieved with worksite health assessments and personalized health reports in the absence of an intervention.

  8. Improving employee well-being through worksite health promotion? The employees' perspective

    OpenAIRE

    Nöhammer , Elisabeth; Stummer , Harald; Schusterschitz , Claudia

    2010-01-01

    Abstract Aim The aim of the present study was to investigate the potential of worksite health promotion to improve individual well-being from the employees? perspective, analyze benefit categories and develop suggestions for future worksite health promotion program designs. Subjects and methods A questionnaire based on a qualitative study was distributed in four Austrian organizations to cover state-owned,...

  9. Dosimetric optimization of worksite involving the installation of VATS containing highly active effluent

    International Nuclear Information System (INIS)

    Legee, F.; Busani, J.; Madigand, Y.; Pailloux, J.

    1996-01-01

    Within the framework of safety improvements at the CEA, CEA-FAR, concerned to formalize the ALARA initiative, has carried out for information and training purpose and to create awareness a dosimetric assessment of the worksite where new storage vats for highly active effluents are to be installed. The approach used for this worksite is global. Techniques used were all complementary, ensuring constant elaboration, experiment follow-up and feedback of a worksite at a relatively low dosimetric cost (an estimated 36 men.mSv brought down to 30 men.mSv through implementation of the ALARA principle). This type of global conception of radioprotection involving all the employees (head of project, project managers, companies, radioprotection employees...) which today proves its worth on a modest worksite must now be extended to worksites of a broader scope (several hundreds of men.mSv) where fulfillment of the dosimetric objectives is a major stake. (author)

  10. Disparities in exposure to tobacco smoke pollution at Romanian worksites

    Directory of Open Access Journals (Sweden)

    Dorota Kaleta

    2015-12-01

    Full Text Available [b]Introduction[/b]. Differences in the risk of being exposed to second-hand smoke (SHS in the workplace may occur not only between countries, but also within a country among socio-economic groups. [b]Objectives. [/b]The aim of the study was to examine the associations of exposure to SHS at worksites with selected factors in non-smoking Romanian employees. [b]Material and Methods[/b]. Data on exposure to SHS at worksites and other characteristics of respondents came from the Global Adult Tobacco Survey (GATS. GATS is a nationally representative household survey of adults 15 years of age or older, using a standard protocol. [b]Results[/b]. Among 4,517 respondents who completed the questionnaire there were 1,333 subjects, including 859 non-smokers who worked in an indoor area outside the home. The prevalence of exposure to SHS was 31.2% among non-smoking male and 23.9% among non-smoking female employees (p<0.05. Employees with primary education had odds of exposure to SHS at work nearly twice as high, compared to the respondents having high education attainment (OR=1.9; 95% CI: 1.2–2.9. Moreover, exposure to SHS at worksites was significantly associated with a low level of support for tobacco control policies among workers (OR = 1.8; 95% CI: 1.2–2.8. [b]Conclusions[/b]. In spite of the increasing presence of smoking bans in public and workplaces, enforcement still seems to be unsuccessful in the occupational space in Romania. In order to reduce SHS exposure in workplaces, strengthening support for tobacco control policies is essential.

  11. Payroll contracting for smoking cessation: a worksite pilot study.

    Science.gov (United States)

    Jeffery, R W; Pheley, A M; Forster, J L; Kramer, F M; Snell, M K

    1988-01-01

    Twenty-one men and 38 women participated in a worksite smoking cessation/smoking reduction program that combined financial contracts, organized through payroll deduction, and biweekly group treatment sessions. At the end of the program the smoking cessation rate was 51%, validated by expired air carbon monoxide. Six months later the validated cessation rate was 12%. We conclude that payroll incentives may be effective in helping workers quit smoking and offer suggestions for ways to promote better maintenance of this important behavior change.

  12. Predictors of participation in prostate cancer screening at worksites.

    Science.gov (United States)

    Weinrich, S P; Greiner, E; Reis-Starr, C; Yoon, S; Weinrich, M

    1998-01-01

    Unfortunately, African American men have a higher incidence of and a higher mortality rate for prostate cancer than White men but are less likely to participate in prostate cancer screening. This correlational survey research identifies predictors for participation in a free prostate cancer screening in 179 men, 64% of whom are African American. Each man was invited to see his personal physician for a free prostate cancer screening following a prostate cancer educational program given at his worksite. Forty-seven percent of the African American men went to their personal physician following the educational program and received a digital rectal examination (DRE) and a prostate specific antigen (PSA) screening. In the original cohort of educational program attendees, only 16% of the African Americans had obtained a DRE in the previous 12 months. However, 44% subsequently did participate in free DRE screening. Similarly, only 6% of the African American men had received a PSA screening in the previous 12 months, yet 42% obtained a PSA screening after the educational program, a sevenfold increase. Implications for allocating limited resources for education and screening to the high-risk group of African American men are discussed. This study's model of a prostate cancer educational program at worksites followed by attendees visiting their personal physician for screening could be replicated throughout the United States to increase African American men's participation in prostate cancer screening.

  13. Worksite health and safety climate: scale development and effects of a health promotion intervention.

    Science.gov (United States)

    Basen-Engquist, K; Hudmon, K S; Tripp, M; Chamberlain, R

    1998-01-01

    Environmental influences on health and health behavior have an important place in research on worksite health promotion. We tested the validity and internal consistency of a new measure of organizational health and safety climate that was used in a large randomized trial of a worksite cancer prevention program (the Working Well Trial). The resulting scales then were applied to assess intervention effects. This study uses data from a subset of 40 worksites in the Working Well Trial. Employees at 20 natural gas pipeline worksite and 20 rural electrical cooperatives completed a cross-sectional questionnaire at baseline and 3-year follow-up. A factor analysis of this self-report instrument produced a two-factor solution. The resulting health and safety climate scales had good internal consistency (Cronbach's alpha = 0.74 and 0.82, respectively) and concurrent validity. The health climate scale was correlated more highly with organizational measures that were indicative of a supportive health climate than those indicating supportive safety climate, while the reverse was true of the safety climate scale. Changes in health climate were associated with the number of smoking and smokeless tobacco programs offered at the worksites at the time of the 3-year follow-up (r = 0.46 and 0.42, respectively). The scales were not correlated with most employee health behaviors. The health climate scores increased at intervention worksites, compared with scores at control worksites (F[1,36] = 7.57, P = 0.009). The health and safety climate scales developed for this study provide useful instruments for measuring organizational change related to worksite health promotion activities. The Working Well Intervention resulted in a significant improvement in worksite health climate.

  14. Edge Detection,

    Science.gov (United States)

    1985-09-01

    PROJECT. T ASK0 Artificial Inteligence Laboratory AREA It WORK UNIT NUMBERS V 545 Technology Square ( Cambridge, HA 02139 I I* CONTOOL1LIN@4OFFICE NAME...ARD-A1t62 62 EDGE DETECTION(U) NASSACNUSETTS INST OF TECH CAMBRIDGE 1/1 ARTIFICIAL INTELLIGENCE LAB E C HILDRETH SEP 85 AI-M-8 N99SI4-8S-C-6595...used to carry out this analysis. cce~iO a N) ’.~" D LI’BL. P p ------------ Sj. t i MASSACHUSETTS INSTITUTE OF TECHNOLOGY i ARTIFICIAL INTELLIGENCE

  15. Working on wellness (WOW): A worksite health promotion intervention programme

    Science.gov (United States)

    2012-01-01

    Background Insufficient PA has been shown to cluster with other CVD risk factors including insufficient fruit and vegetable intake, overweight, increased serum cholesterol concentrations and elevated blood pressure. This paper describes the development of Working on Wellness (WOW), a worksite intervention program incorporating motivational interviewing by wellness specialists, targeting employees at risk. In addition, we describe the evaluation the effectiveness of the intervention among employees at increased risk for cardiovascular disease. Methods The intervention mapping (IM) protocol was used in the planning and design of WOW. Focus group discussions and interviews with employees and managers identified the importance of addressing risk factors for CVD at the worksite. Based on the employees’ preference for individual counselling, and previous evidence of the effectiveness of this approach in the worksite setting, we decided to use motivational interviewing as part of the intervention strategy. Thus, as a cluster-randomised, controlled control trial, employees at increased risk for CVD (N = 928) will be assigned to a control or an intervention group, based on company random allocation. The sessions will include motivational interviewing techniques, comprised of two face-to-face and four telephonic sessions, with the primary aim to increase habitual levels of PA. Measures will take place at baseline, 6 and 12 months. Secondary outcomes include changes in nutritional habits, serum cholesterol and glucose concentrations, blood pressure and BMI. In addition, healthcare expenditure and absenteeism will be measured for the economic evaluation. Analysis of variance will be performed to determine whether there were significant changes in physical activity habits in the intervention and control groups at 6 and 12 months. Discussion The formative work on which this intervention is based suggests that the strategy of targeting employees at increased risk for

  16. Working on wellness (WOW: A worksite health promotion intervention programme

    Directory of Open Access Journals (Sweden)

    Kolbe-Alexander Tracy L

    2012-05-01

    Full Text Available Abstract Background Insufficient PA has been shown to cluster with other CVD risk factors including insufficient fruit and vegetable intake, overweight, increased serum cholesterol concentrations and elevated blood pressure. This paper describes the development of Working on Wellness (WOW, a worksite intervention program incorporating motivational interviewing by wellness specialists, targeting employees at risk. In addition, we describe the evaluation the effectiveness of the intervention among employees at increased risk for cardiovascular disease. Methods The intervention mapping (IM protocol was used in the planning and design of WOW. Focus group discussions and interviews with employees and managers identified the importance of addressing risk factors for CVD at the worksite. Based on the employees’ preference for individual counselling, and previous evidence of the effectiveness of this approach in the worksite setting, we decided to use motivational interviewing as part of the intervention strategy. Thus, as a cluster-randomised, controlled control trial, employees at increased risk for CVD (N = 928 will be assigned to a control or an intervention group, based on company random allocation. The sessions will include motivational interviewing techniques, comprised of two face-to-face and four telephonic sessions, with the primary aim to increase habitual levels of PA. Measures will take place at baseline, 6 and 12 months. Secondary outcomes include changes in nutritional habits, serum cholesterol and glucose concentrations, blood pressure and BMI. In addition, healthcare expenditure and absenteeism will be measured for the economic evaluation. Analysis of variance will be performed to determine whether there were significant changes in physical activity habits in the intervention and control groups at 6 and 12 months. Discussion The formative work on which this intervention is based suggests that the strategy of targeting

  17. Working on wellness (WOW): a worksite health promotion intervention programme.

    Science.gov (United States)

    Kolbe-Alexander, Tracy L; Proper, Karin I; Lambert, Estelle V; van Wier, Marieke F; Pillay, Julian D; Nossel, Craig; Adonis, Leegale; Van Mechelen, Willem

    2012-05-24

    Insufficient PA has been shown to cluster with other CVD risk factors including insufficient fruit and vegetable intake, overweight, increased serum cholesterol concentrations and elevated blood pressure. This paper describes the development of Working on Wellness (WOW), a worksite intervention program incorporating motivational interviewing by wellness specialists, targeting employees at risk. In addition, we describe the evaluation the effectiveness of the intervention among employees at increased risk for cardiovascular disease. The intervention mapping (IM) protocol was used in the planning and design of WOW. Focus group discussions and interviews with employees and managers identified the importance of addressing risk factors for CVD at the worksite. Based on the employees' preference for individual counselling, and previous evidence of the effectiveness of this approach in the worksite setting, we decided to use motivational interviewing as part of the intervention strategy. Thus, as a cluster-randomised, controlled control trial, employees at increased risk for CVD (N = 928) will be assigned to a control or an intervention group, based on company random allocation. The sessions will include motivational interviewing techniques, comprised of two face-to-face and four telephonic sessions, with the primary aim to increase habitual levels of PA. Measures will take place at baseline, 6 and 12 months. Secondary outcomes include changes in nutritional habits, serum cholesterol and glucose concentrations, blood pressure and BMI. In addition, healthcare expenditure and absenteeism will be measured for the economic evaluation. Analysis of variance will be performed to determine whether there were significant changes in physical activity habits in the intervention and control groups at 6 and 12 months. The formative work on which this intervention is based suggests that the strategy of targeting employees at increased risk for CVD is preferred. Importantly

  18. Worksite dining as a collective good or individualization of health - a Danish perspective

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Mikkelsen, Bent Egberg; Thorsen, Anne Vibeke

    2009-01-01

    between work and diet and the experiences with promotion of healthier eating through intervention projects at worksites. The overall results of the survey shows that there is not much Danish research about the influence of the work and the work environment on eating habits, including worksite eating...... research is the influence of the worksite eating on work and work environment. The survey showed social inequalities in relation to health, like in many other countries. A national dietary survey has shown that persons with long education eat more health and is more interested in health food. Research......The paper is based on a survey of Danish literature about worksite eating carried out as a part of the project ‘Food at work around the clock?’ carried by Lunds University and Technical University of Denmark and financed by Øresund Food Network. The focus has especially been on the relations...

  19. A small business worksite wellness model for improving health behaviors.

    Science.gov (United States)

    Merrill, Ray M

    2013-08-01

    To evaluate the effectiveness of a wellness program delivered by WellSteps, LLC, aimed at improving employee health behaviors in small companies that lack the resources to independently develop and manage a wellness program. Analyses are based on 618 employees from five diverse companies that completed an initial personal health assessment. Exercise and dietary behaviors significantly improved across the five companies. Significant improvements in health perception and life satisfaction also resulted and were associated with improvements in health behaviors. Three of the five companies, each with fewer than 50 employees, were most effective in influencing positive health behaviors, health perceptions, and life satisfaction. The worksite wellness program effectively improved health behaviors, health perceptions, and life satisfaction.

  20. Implementation of a Worksite Wellness Program Targeting Small Businesses

    Science.gov (United States)

    Stinson, Kaylan E.; Metcalf, Dianne; Fang, Hai; Brockbank, Claire vS.; Jinnett, Kimberly; Reynolds, Stephen; Trotter, Margo; Witter, Roxana; Tenney, Liliana; Atherly, Adam; Goetzel, Ron Z.

    2015-01-01

    Objective: To assess small business adoption and need for a worksite wellness program in a longitudinal study of health risks, productivity, workers' compensation rates, and claims costs. Methods: Health risk assessment data from 6507 employees in 260 companies were examined. Employer and employee data are reported as frequencies, with means and standard deviations reported when applicable. Results: Of the 260 companies enrolled in the health risk management program, 71% continued more than 1 year, with 97% reporting that worker wellness improves worker safety. Of 6507 participating employees, 34.3% were overweight and 25.6% obese. Approximately one in five participants reported depression. Potentially modifiable conditions affecting 15% or more of enrollees include chronic fatigue, sleeping problems, headaches, arthritis, hypercholesterolemia, and hypertension. Conclusions: Small businesses are a suitable target for the introduction of health promotion programs. PMID:25563536

  1. EMPLOYER CHOICES IN EAP DESIGN AND WORKSITE SERVICES.

    Science.gov (United States)

    McCann, Bernard; Azzone, Vanessa; Merrick, Elizabeth L; Hiatt, Deirdre; Hodgkin, Dominic; Horgan, Constance M

    2010-01-01

    In today's complex private healthcare market, employers have varied preferences for particular features of behavioral health products such as Employee Assistance Programs (EAPs). Factors which may influence these preferences include: establishment size, type of organization, industry, workplace substance abuse regulations, and structure of health insurance benefits. This study of 103 large employer purchasers from a single managed behavioral healthcare organization investigated the impact of such variables on the EAP features that employers select to provide to workers and their families. Our findings indicate that for this group of employers, preferences for the type and delivery mode of EAP counseling services are fairly universal, while number of sessions provided and choices for EAP-provided worksite activities are much more varied, and may be more reflective of the diverse characteristics, organizational missions and workplace culture found among larger employers in the US.

  2. Social shaping of food intervention initiatives at worksites: canteen takeaway schemes at two Danish hospitals.

    Science.gov (United States)

    Poulsen, Signe; Jørgensen, Michael Søgaard

    2011-09-01

    The aim of this article is to analyse the social shaping of worksite food interventions at two Danish worksites. The overall aims are to contribute first, to the theoretical frameworks for the planning and analysis of food and health interventions at worksites and second, to a foodscape approach to worksite food interventions. The article is based on a case study of the design of a canteen takeaway (CTA) scheme for employees at two Danish hospitals. This was carried out as part of a project to investigate the shaping and impact of schemes that offer employees meals to buy, to take home or to eat at the worksite during irregular working hours. Data collection was carried out through semi-structured interviews with stakeholders within the two change processes. Two focus group interviews were also carried out at one hospital and results from a user survey carried out by other researchers at the other hospital were included. Theoretically, the study was based on the social constitution approach to change processes at worksites and a co-evolution approach to problem-solution complexes as part of change processes. Both interventions were initiated because of the need to improve the food supply for the evening shift and the work-life balance. The shaping of the schemes at the two hospitals became rather different change processes due to the local organizational processes shaped by previously developed norms and values. At one hospital the change process challenged norms and values about food culture and challenged ideas in the canteen kitchen about working hours. At the other hospital, the change was more of a learning process that aimed at finding the best way to offer a CTA scheme. Worksite health promotion practitioners should be aware that the intervention itself is an object of negotiation between different stakeholders at a worksite based on existing norms and values. The social contextual model and the setting approach to worksite health interventions lack

  3. Worksite adjustments and work ability among employed cancer survivors.

    Science.gov (United States)

    Torp, Steffen; Nielsen, Roy A; Gudbergsson, Sævar B; Dahl, Alv A

    2012-09-01

    This study was conducted to determine how many cancer survivors (CSs) make worksite adjustments and what kinds of adjustments they make. Changes in work ability among employed CSs were explored, and clinical, sociodemographic, and work-related factors associated with the current total work ability were studied. CSs of the ten most common invasive types of cancer for men and women in Norway completed a mailed questionnaire 15-39 months after being diagnosed with cancer. Included in the analyses were all participants who worked both at the time of diagnosis and at the time of the survey and who had not changed their labor force status since diagnosis (n = 563). The current total work ability was compared to the lifetime best (0-10 score). Twenty-six percent of the employed CSs had made adjustments at work, and the most common adjustment was changing the number of work hours per week. Despite the fact that 31% and 23% reported reduced physical and mental work abilities, respectively, more than 90% of the CSs reported that they coped well with their work demands. The mean total work ability score was high (8.6) among both men and women. Being self-employed and working part-time at the time of diagnosis showed significant negative correlations with total work ability, while a favorable psychosocial work environment showed a significant positive correlation. CSs with low work ability were more often in contact with the occupational health service and also made more worksite adjustments than others. The prospects of future work life seem optimistic for Norwegian employed CSs who return to work relatively soon after primary treatment.

  4. Living edge

    DEFF Research Database (Denmark)

    Earon, Ofri

    2014-01-01

    was originally introduced to enhance indoor qualities including light and view. Throughout the paper, it is argued that these ecological motives have grown to architectural and urban dimensions. The paper analyzes the characteristics and potentials of these dimensions and their interconnections. The paper...... on the ground level, but there is a lack of recognition in the significance of communicative characters as well at the higher part of the edge. The city’s planning approach is “Consider urban life before urban space. Consider urban space before buildings” This urban strategy neglects the possible architectural...... contribution to the street atmosphere and its effect on urban life. Bay balcony has been a common architectural element in Copenhagen’s residential buildings, since the end of the twenties. It is a domestic border with an architectural thickness combining window, door, windowsill and balcony. The bay balcony...

  5. Radiation survey and management on the reconstructed radioactive work-site

    International Nuclear Information System (INIS)

    Yu Tao; Liang Shiqiang; Wang Youmei

    2004-12-01

    The experiences of radiation survey and administration in the prophase on reconstructed radioactive work-site are summarized. The advance works are to investigate the reconstructed work-site, settle working plans, devise inspecting flow charts, deal with something in time in the local and train the staffers. The works about prophasic decontaminating, removing and cleaning up the site have been finished, which have established the deep foundation to develop later task. (authors)

  6. Does a grill menu redesign influence sales, nutrients purchased, and consumer acceptance in a worksite cafeteria?

    OpenAIRE

    Maya K. Vadiveloo; Vasanti S. Malik; Donna Spiegelman; Walter C. Willett; Josiemer Mattei

    2017-01-01

    Worksite cafeterias are compelling venues to improve diet quality through environmental changes.We conducted a pre-post study to evaluate how a cafeteria-initiated grill menu redesign influenced sales, revenue, and nutrient content of foods purchased. Secondly, we evaluated consumer opinions about menu changes to inform practices for worksite environment interventions. Monthly sales data (2012–2015) were used to compute gross sales and revenue of entrées and side dishes pre-post menu changes....

  7. The relationship of individual characteristics, perceived worksite support and perceived creativity to clinical nurses' innovative outcome.

    Science.gov (United States)

    Tsai, Hsiu-Min; Liou, Shwu-Ru; Hsiao, Ya-Chu; Cheng, Ching-Yu

    2013-09-01

    To understand the relationship of individual characteristics, perceived worksite support and perceived personal creativity to clinical nurses' innovative outcome (receiving the Nursing Innovation Award). Since the idea of applying creativity and innovation to clinical nursing practice and management was first advocated in the Nursing Administration Quarterly in 1982, the topic of nursing innovation has gained worldwide attention. To increase the prevalence of nursing innovation, it is important to identify and understand the related factors that influence nurses' innovative outcome. This study used a cross-sectional descriptive survey design. A self-administered questionnaire was completed by 32 award winners and 506 nonawarded clinical nurses in Taiwan. The level of creativity perceived by all participants was moderate-to-high. Individual characteristics (r = 0·61) and worksite support (r = 0·27) were both correlated with perceived creativity. Individual characteristics and worksite support showed some correlation as well (r = 0·21). Individual characteristics and worksite support could predict perceived creativity after controlling for demographic variables, but only individual characteristics had an effect on innovative outcome. Perceived creativity did not have mediation effects either between individual characteristics and innovative outcome or between worksite support and innovative outcome. Clinical nurses' individual characteristics had a direct relationship to innovative outcome, whereas neither worksite support nor creativity was correlated with innovative outcome. Although worksite support did not show effects on innovative outcome, it was related to both perceived creativity and individual characteristics. As suggested by other scholars, there might be other related factors between creativity and innovative outcome. Although worksite support did not have effect on clinical nurses' innovative outcome, it was related to individual characteristics

  8. Worksite physical activity breaks: Perspectives on feasibility of implementation.

    Science.gov (United States)

    Bramante, Carolyn T; King, Maggie M; Story, Mary; Whitt-Glover, Melicia C; Barr-Anderson, Daheia J

    2018-01-01

    Worksites offer a unique opportunity to increase physical activity in persons with both active and sedentary lifestyles. The objective of this study was to examine employee and supervisor perspectives on feasibility and acceptability of 10-minute Instant Recess ® physical activity videos in the worksite. Convenience sample of public and private worksites in Minneapolis/St. Paul, MN. Employees (n = 187) at 13 worksites were recruited by a one-time email invitation to participate in a group Instant Recess break and complete a 15-question survey. One supervisor per site participated in a one-on-one interview to assess suggestions for feasibility of implementation. Likert-type survey responses were averaged per worksite and overall. Interview results were recorded, transcribed, and coded by two authors. Employees were extremely positive about enjoyment, increased productivity, comfort, and feasibility of doing Instant Recess at the same time and place every day (score = 4.29, 4.17, 4.25, and 4.37 out of 5, respectively). However, they did not feel comfortable leading an Instant Recess break (score = 2.68 out of 5). Supervisors voiced during the one-on-one interviews that they enjoyed Instant Recess (13 out of 13 supervisors), were enthusiastic about Instant Recess as a simple and cost-effective entry into worksite wellness (11 out of 13 supervisors), and felt that Instant Recess could be institutionalized by offering it daily at a set time and place (13 out of 13 supervisors). Employees and supervisors at various worksites believed that it is feasible and desirable to offer 10-minute physical activity breaks using videos during the workday.

  9. Effects of worksite health promotion interventions on employee diets: a systematic review

    Directory of Open Access Journals (Sweden)

    Aston Louise M

    2010-02-01

    Full Text Available Abstract Background Public health strategies place increasing emphasis on opportunities to promote healthy behaviours within the workplace setting. Previous research has suggested worksite health promotion programmes have positive effects on physical activity and weight loss, yet little is known regarding their effects on dietary behaviour. The aim of this review was to assess the effects of worksite interventions on employee diets. Methods Electronic databases (MEDLINE, The Cochrane Library, PsycINFO, EMBASE, LexisNexis were searched for relevant articles published between 1995 and April 2009. Studies were eligible for inclusion if they were peer-reviewed English language publications describing a worksite-based health promotion intervention with minimum study duration of eight weeks. All study designs were eligible. Studies had to report one or more diet-related outcome (energy, fat, fruit, or vegetable intakes. Methodological quality was assessed using a checklist that included randomisation methods, use of a control group, and study attrition rates. Results Sixteen studies were included in the review. Eight programmes focussed on employee education, and the remainder targeted change to the worksite environment, either alone or in combination with education. Study methodological quality was moderate. In general, worksite interventions led to positive changes in fruit, vegetable and total fat intake. However, reliance on self-reported methods of dietary assessment means there is a significant risk of bias. No study measured more robust outcomes such as absenteeism, productivity, or healthcare utilisation. Conclusions The findings of this review suggest that worksite health promotion programmes are associated with moderate improvement in dietary intake. The quality of studies to date has been frequently sub-optimal and further, well designed studies are needed in order to reliably determine effectiveness and cost-effectiveness. Future

  10. Mixed methods analysis of eighteen worksite policies, programs, and environments for physical activity.

    Science.gov (United States)

    Hipp, J Aaron; Dodson, Elizabeth A; Lee, Jung Ae; Marx, Christine M; Yang, Lin; Tabak, Rachel G; Hoehner, Christine; Marquet, Oriol; Brownson, Ross C

    2017-06-14

    This study examined whether specific worksite supports for physical activity (PA) were associated with total and domain-specific PA. A cross-sectional, telephone-based study was conducted in four Missouri, USA, metropolitan areas in 2012 and 2013. Outcome variables included total PA and sub-domains (leisure, work, travel) measured using the International Physical Activity Questionnaire. Logistic regression determined odds of meeting PA recommendations, given access to and use of 18 unique PA worksite supports. A subsample of 119 participants also wore hip accelerometry for seven consecutive days and maintained a wear-time diary. Access to worksite supports were associated with odds of meeting objective moderate and vigorous (MV) PA above 150 min per week. Among 2013 survey participants, meeting PA recommendations while performing work-related tasks was significantly associated with several supports (e.g., walking maps, stair prompts), as was meeting recommendations during travel (e.g., flextime for PA, incentives for public transportation, walking/bicycling to work). Access to 11 worksite supports increased odds of meeting PA recommendations through leisure-time PA; five supports were associated with total PA. There were significant differences between access to and use of supports. Using objective MVPA, access to worksite challenges and bike storage were significantly associated with five and three times greater odds of meeting 150 min of MVPA per week, respectively. Worksite wellness plans are increasing across the US and employers are eager for evidence-based supports for increasing PA. This study provides insights into the utility of multiple worksite supports for PA to increase odds that employees meet PA recommendations.

  11. Worksite environment physical activity and healthy food choices: measurement of the worksite food and physical activity environment at four metropolitan bus garages

    Directory of Open Access Journals (Sweden)

    Gerlach Anne F

    2007-05-01

    Full Text Available Abstract Background The present research describes a measure of the worksite environment for food, physical activity and weight management. The worksite environment measure (WEM instrument was developed for the Route H Study, a worksite environmental intervention for weight gain prevention in four metro transit bus garages in Minneapolis-St. Paul. Methods Two trained raters visited each of the four bus garages and independently completed the WEM. Food, physical activity and weight management-related items were observed and recorded on a structured form. Inter-rater reliability was computed at the item level using a simple percentage agreement. Results The WEM showed high inter-rater reliability for the number and presence of food-related items. All garages had vending machines, microwaves and refrigerators. Assessment of the physical activity environment yielded similar reliability for the number and presence/absence of fitness items. Each garage had a fitness room (average of 4.3 items of fitness equipment. All garages had at least one stationary bike and treadmill. Three garages had at least one weighing scale available. There were no designated walking areas inside or outside. There were on average Conclusion The WEM is a reliable measure of the worksite nutrition, physical activity, and weight management environment that can be used to assess changes in the work environment.

  12. A comparison of Omaha worksite health promotion activities to the 1992 national survey with a special perspective on program intervention.

    Science.gov (United States)

    Eickhoff-Shemek, J M; Ryan, K F

    1995-01-01

    The purpose of this study was to compare the results from a survey of Omaha worksite health promotion activities with the results of a 1992 national survey. Comparisons were made on: (1) the kinds of health promotion activities offered, (2) progress toward the Healthy People 2000 worksite objectives, (3) types of program intervention offered, and (4) administrative factors. A one-time, written, mail-out/mail-back survey design was used. The study took place in Omaha, Nebraska. All area public and private worksites with 250 or more employees were sent surveys. Individuals who were preselected and identified as the best qualified within the company completed the survey instrument. Of the 176 worksites surveyed, 86 completed the survey (49%). Descriptive statistics (percentages) were used to compare the two surveys on kinds of programs offered, progress toward Healthy People 2000 related to worksite health promotion, the types of program intervention offered, and administrative factors. Generally, a greater percentage of respondent worksites from the national survey are offering more health promotion activities and have made more progress toward the Healthy People 2000 worksite objectives than the Omaha worksites. Results from both surveys showed that low levels of intervention are more prevalent than high levels of intervention, and that health promotion activities in most worksites are coordinated by human resources departments and not by someone professionally prepared in health education. Traditionally, major goals of worksite health promotion programs have focused on important organizational outcomes such as improved productivity/morale, reduction in absenteeism, and health care cost-containment. It is important to recognize, however, that low levels of intervention have less impact than more intensive programs on these desired outcomes. Future goals for local and national worksite health promotion programs may need to encourage implementation of more intensive

  13. Monitoring worksite clinic performance using a cost-benefit tool.

    Science.gov (United States)

    Tao, Xuguang; Chenoweth, David; Alfriend, Amy S; Baron, David M; Kirkland, Tracie W; Scherb, Jill; Bernacki, Edward J

    2009-10-01

    The purpose of this study was to explore the usefulness of continuously assessing the return on investment (ROI) of worksite medical clinics as a means of evaluating clinic performance. Visit data from January 1, 2007, to December 31, 2008, were collected from all the on-site clinics operated for the Pepsi Bottling Group. An average system-wide ROI was calculated from the time of each clinic's opening and throughout the study period. A multivariate linear regression model was used to determine the association of average ROI with penetration/utilization rate and plant size. A total of 26 on-site clinics were actively running as of December 2008. The average ROI at the time of start up was 0.4, which increased to 1.2 at approximately 4 months and 1.6 at the end of the first year of operation. Overall, it seems that the cost of operating a clinic becomes equal to the cost of similar care purchased in the community (ROI = 1) at approximately 3 months after a clinic's opening and flattens out at the end of the first year. The magnitude of the ROI was closely related to the number of visits (a function of the penetration/utilization rate) and the size of the plant population served. Serial monitoring of ROIs is a useful metric in assessing on-site clinic performance and quantifying the effect of new initiatives aimed at increasing a clinic's cost effectiveness.

  14. The worksite for the tram-line reaches CERN

    CERN Document Server

    2009-01-01

    The civil-engineering work for the tram-line outside CERN starts on 16 February. The zones affected by the work. The darkest line represents the part of the road where the work will be carried out between March and July 2009.The worksite for the section of tram-line between Meyrin-Village and CERN is entering a new phase. The contractors are to begin by upgrading the underground pipelines to comply with the installation requirements for the tramline track. The next stage will be to install the track itself, which will entail a complete reconstruction of the roadway. In the coming weeks a roundabout will be created in front of Gate A, which will allow CERN personnel travelling towards Saint-Genis-Pouilly to exit via Gate A rather than having to use the car park where the flags are as a thoroughfare. Once the roundabout is complete, it is planned to prohibit direct access to the Route de Meyrin at Gate B via this car park to all traffic ...

  15. The Relationship Between the Use of a Worksite Medical Home and ED Visits or Hospitalizations

    Directory of Open Access Journals (Sweden)

    Marissa Stroo BS

    2015-10-01

    Full Text Available Worksite medical homes may be a good model for improving employee health. The aim of this study was to compare the likelihood of being seen in the emergency department (ED or being hospitalized by level of use (no use, occasional use, or primary care of a worksite medical home, overall and by type of user (employee, adult dependent, or pediatric dependent. This was a retrospective analysis of claims data, using covariate-adjusted logistic regression models for ED visits and inpatient hospitalizations. Secondary data for the years 2006 to 2008 from a company that offers an on-site health care center (HCC were used. Analyses were based on a data set that combines health plan claims and human resources demographic data. Overall, people who did not use the HCC were more likely to be seen in the ED (adjusted odds ratio [OR] = 1.20, 95% confidence interval or CI [1.06, 1.37], P = .005 or to be hospitalized (adjusted OR = 1.58; 95% CI [1.34, 1.86]; P < .0001 compared with those who used the HCC for primary care. Both ED visits and hospitalizations for employees and dependents in this study were lower among those who used the worksite medical home for primary care. Worksite medical homes can improve chronic disease management and thus reduce ED visits and hospitalizations. These findings contribute to growing evidence that worksite medical homes are potentially cost-effective.

  16. Can worksite nutritional interventions improve productivity and firm profitability? A literature review.

    Science.gov (United States)

    Jensen, Jørgen Dejgård

    2011-07-01

    This paper investigates whether and how worksite nutrition policies can improve employee productivity. The questions are pursued through a literature review, including a systematic search of literature--combined with literature identified from backward references--on randomized controlled or quasi-experimental worksite intervention trials and observational cross-sectional studies. Studies were selected on the basis of topic relevance, according to publication title and subsequently according to abstract content. A quality appraisal of the studies was based on study design and clarity in definition of interventions, as well as environmental and outcome variables. The search identified 2,358 publications, 30 of which were found suitable for the review. Several of the reviewed studies suggest that diet-related worksite interventions have positive impacts on employees' nutritional knowledge, food intake and health and on the firm's profitability, mainly in terms of reduced absenteeism and presenteeism. Well-targeted and efficiently implemented diet-related worksite health promotion interventions may improve labour productivity by 1%-2%. On larger worksites, such productivity gains are likely to more than offset the costs of implementing such interventions. These conclusions are subject to some uncertainty due to the relatively limited amount of literature in the field.

  17. Using nudging and social marketing techniques to create healthy worksite cafeterias in the Netherlands: intervention development and study design

    NARCIS (Netherlands)

    Velema, E.; Vyth, E.L.; Steenhuis, I.H.M.

    2017-01-01

    Background: The worksite cafeteria is a suitable setting for interventions focusing on changing eating behavior, because a lot of employees visit the worksite cafeteria regularly and a variety of interventions could be implemented there. The aim of this paper is to describe the intervention

  18. Using nudging and social marketing techniques to create healthy worksite cafeterias in the Netherlands: intervention development and study design

    Directory of Open Access Journals (Sweden)

    Elizabeth Velema

    2017-01-01

    Full Text Available Abstract Background The worksite cafeteria is a suitable setting for interventions focusing on changing eating behavior, because a lot of employees visit the worksite cafeteria regularly and a variety of interventions could be implemented there. The aim of this paper is to describe the intervention development and design of the evaluation of an intervention to make the purchase behavior of employees in the worksite cafeteria healthier. The developed intervention called “the worksite cafeteria 2.0” consists of a set of 19 strategies based on theory of nudging and social marketing (marketing mix. The intervention will be evaluated in a real-life setting, that is Dutch worksite cafeterias of different companies and with a number of contract catering organizations. Methods/design The study is a randomized controlled trial (RCT, with 34 Dutch worksite cafeterias randomly allocated to the 12-week intervention or to the control group. Primary outcomes are sales data of selected products groups like sandwiches, salads, snacks and bread topping. Secondary outcomes are satisfaction of employees with the cafeteria and vitality. Discussion When executed, the described RCT will provide better knowledge in the effect of the intervention “the worksite cafeteria 2.0” on the purchasing behavior of Dutch employees in worksite cafeterias. Trial registration Dutch Trial register: NTR5372 .

  19. Effect of Fresh Fruit Availability at Worksites on the Fruit and Vegetable Consumption of Low-Wage Employees

    Science.gov (United States)

    Backman, Desiree; Gonzaga, Gian; Sugerman, Sharon; Francis, Dona; Cook, Sara

    2011-01-01

    Objective: To examine the impact of fresh fruit availability at worksites on the fruit and vegetable consumption and related psychosocial determinants of low-wage employees. Design: A prospective, randomized block experimental design. Setting: Seven apparel manufacturing and 2 food processing worksites. Participants: A convenience sample of 391…

  20. Relationship of cravings with weight loss and hunger: results from a 6 month worksite weight loss intervention

    Science.gov (United States)

    We examined the association of food cravings with weight loss and eating behaviors in a 6 month worksite lifestyle weight loss program. This randomized controlled trial of the intervention versus a wait-listed control was conducted at 4 worksites, and 95 participants completed outcome assessments ...

  1. Using nudging and social marketing techniques to create healthy worksite cafeterias in the Netherlands: intervention development and study design.

    Science.gov (United States)

    Velema, Elizabeth; Vyth, Ellis L; Steenhuis, Ingrid H M

    2017-01-11

    The worksite cafeteria is a suitable setting for interventions focusing on changing eating behavior, because a lot of employees visit the worksite cafeteria regularly and a variety of interventions could be implemented there. The aim of this paper is to describe the intervention development and design of the evaluation of an intervention to make the purchase behavior of employees in the worksite cafeteria healthier. The developed intervention called "the worksite cafeteria 2.0" consists of a set of 19 strategies based on theory of nudging and social marketing (marketing mix). The intervention will be evaluated in a real-life setting, that is Dutch worksite cafeterias of different companies and with a number of contract catering organizations. The study is a randomized controlled trial (RCT), with 34 Dutch worksite cafeterias randomly allocated to the 12-week intervention or to the control group. Primary outcomes are sales data of selected products groups like sandwiches, salads, snacks and bread topping. Secondary outcomes are satisfaction of employees with the cafeteria and vitality. When executed, the described RCT will provide better knowledge in the effect of the intervention "the worksite cafeteria 2.0" on the purchasing behavior of Dutch employees in worksite cafeterias. Dutch Trial register: NTR5372 .

  2. Workforce gender, company size and corporate financial support are predictors of availability of healthy meals in Danish worksite canteens

    DEFF Research Database (Denmark)

    Thorsen, Anne Vibeke; Lassen, Anne Dahl; Andersen, Jens Strodl

    2009-01-01

    . Design: A self-administered questionnaire was randomly mailed to 1967 worksite canteen managers. Besides information and characteristics about the canteen and the worksite. the canteen managers specified the Menus available Two different health groups (Healthy and Less Healthy) were defined in three...... Danish worksite canteen managers replied, resulting in a response rate of 29% Results Only 12% of the canteens applied to the Healthy group combining all the three meal categories in particular, worksites with more than 75% female employees served healthy menus on a. frequent basis The size...... of the worksite was positively correlated with more healthy meal options Furthermore, the present study suggest.,, I positive relationship between corporate financial support and the availability of healthy meal options Conclusions Among the selected variables Studied, workforce gender, company size and corporate...

  3. A Worksite Nutrition Intervention is Effective at Improving Employee Well-Being: A Pilot Study.

    Science.gov (United States)

    Sutliffe, Jay T; Carnot, Mary Jo; Fuhrman, Joel H; Sutliffe, Chloe A; Scheid, Julia C

    2018-01-01

    Worksite dietary interventions show substantial potential for improving employee health and well-being. The aim of this pilot study was to determine the effect of a worksite nutrition intervention on improving well-being. Thirty-five university employees participated in a 6-week nutrition intervention. The dietary protocol emphasized the daily consumption of greens, beans/legumes, a variety of other vegetables, fruits, nuts, seeds, and whole grains, referred to as a micronutrient-dense, plant-rich diet. Participants were encouraged to minimize the consumption of refined foods and animal products. Significant improvements in sleep quality, quality of life, and depressive symptoms were found. Findings reveal that a worksite nutrition intervention is effective at improving sleep quality, quality of life, and depressive symptoms with a projected improvement in work productivity and attendance.

  4. Effectiveness of worksite interventions to increase influenza vaccination rates among employees and families.

    Science.gov (United States)

    Ofstead, Cori L; Sherman, Bruce W; Wetzler, Harry P; Dirlam Langlay, Alexandra M; Mueller, Natalie J; Ward, Jeremy M; Ritter, Daniel R; Poland, Gregory A

    2013-02-01

    To increase influenza vaccination rates among industrial employees and their families through a campaign at a large corporation. This prospective, multisite study used employee surveys and claims data to evaluate an evidence-based worksite vaccination program. Vaccination rates among insured employees and dependents (N = 13,520) increased significantly after the intervention (P employees received vaccine at employer-sponsored events. There was a strong association between employee and family vaccination status. Primary reasons for receiving the vaccine were economic (free 84%; convenient 80%; avoid absenteeism 82%), rather than health-related. Knowledge was associated with vaccination, but customized education did not change beliefs. Worksite programs can demonstrably increase vaccination rates among industrial employees and families. Consideration should be given to repositioning vaccination from medical treatment to community initiatives offered with other worksite health promotion programs.

  5. Effect of a 5-Month Worksite Physical Activity Program on Tertiary Employees Overall Health and Fitness.

    Science.gov (United States)

    Genin, Pauline Manon; Degoutte, Fabrice; Finaud, Julien; Pereira, Bruno; Thivel, David; Duclos, Martine

    2017-02-01

    This pilot study questions the effects of a worksite physical activity program on health and fitness in tertiary employees. Ninety-five employees were randomly assigned to Control (CON); Novice (NOV); Experienced group (EXP). The NOV and EXP groups followed a 5-month worksite physical activity program (at least two sessions/week). Body composition, physical activity level and physical fitness, eating habits, health perception, sleep quality, pain, and quality of life were assessed. Fat mass decreased in NOV and EXP; the distance covered during the 6-minute walking test, push-ups, squat jump increased for NOV and EXP group. Physical activity level, health perception, quality of sleep, and eating habits were improved in NOV. This study underlines for the first time the beneficial effects of such worksite programs among tertiary employees on overall health and the feasibility of its design.

  6. Participation of Danish and immigrant cleaners in a 1-year worksite intervention preventingphysical deterioration

    DEFF Research Database (Denmark)

    Rasmussen, Charlotte D N; Jørgensen, Marie B; Carneiro, Isabella G

    2012-01-01

    differences in participation among immigrant and Danish cleaners throughout a 1-year randomised controlled study tailored to cleaners and carried out in predominantly female workplaces. No significant differences in ethnicity were found in consent and participation throughout the 1-year intervention. Dropout...... was equally distributed among Danish and immigrant cleaners. This study indicates that a worksite health promotion intervention among a female-dominated, high-risk occupation such as cleaning can be equally appealing for Danes and immigrants. Statement of Relevance: This study provides insight about...... participation of Danish and immigrant cleaners in a worksite health promotion intervention in a predominantly female occupation. For attaining high participation and low dropout in future worksite health promotion interventions among cleaners, the intervention ought to not only target the ethnic background...

  7. A Worksite Nutrition Intervention is Effective at Improving Employee Well-Being: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Jay T. Sutliffe

    2018-01-01

    Full Text Available Background. Worksite dietary interventions show substantial potential for improving employee health and well-being. The aim of this pilot study was to determine the effect of a worksite nutrition intervention on improving well-being. Methods. Thirty-five university employees participated in a 6-week nutrition intervention. The dietary protocol emphasized the daily consumption of greens, beans/legumes, a variety of other vegetables, fruits, nuts, seeds, and whole grains, referred to as a micronutrient-dense, plant-rich diet. Participants were encouraged to minimize the consumption of refined foods and animal products. Results. Significant improvements in sleep quality, quality of life, and depressive symptoms were found. Conclusions. Findings reveal that a worksite nutrition intervention is effective at improving sleep quality, quality of life, and depressive symptoms with a projected improvement in work productivity and attendance.

  8. Factors that influence the use and perceptions of employee assistance programs at six worksites.

    Science.gov (United States)

    French, M T; Dunlap, L J; Roman, P M; Steele, P D

    1997-10-01

    Employee assistance programs (EAPs) have gained significant importance in contemporary worksites. This article uses data from 6 case studies to examine several research questions regarding the relationship between worker demographic (e.g., gender, job tenure, and marital status), substance use, and workplace policies and the actual and potential use of the company EAP. Unlike in most of the existing literature, the authors did not find that gender, marital status, or job dissatisfaction are statistically related to actual or potential EAP use at most worksites. However, job tenure and some substance use behaviors were related to actual EAP use in a positive and statistically significant way. Another important finding, underlying the credible integration of EAPs into worksite culture, is the positive and robust relationship between employee trust and confidence in the EAP and actual use. The results of our study both reinforce some long-established principles in the EAP field and encourage further consideration of other beliefs.

  9. Organizational- and employee-level recruitment into a worksite-based weight loss study.

    Science.gov (United States)

    Linnan, Laura; Tate, Deborah F; Harrington, Cherise B; Brooks-Russell, Ashley; Finkelstein, Eric; Bangdiwala, Shrikant; Birken, Ben; Britt, Ashley

    2012-04-01

    Based on national estimates, the majority of working adults are overweight or obese. Overweight and obesity are associated with diminished health, productivity, and increased medical costs for employers. Worksite-based weight loss interventions are desirable from both employee and employer perspectives. To investigate organizational- and employee-level participation in a group-randomized controlled worksite-based weight loss trial. Using a set of inclusion criteria and pre-established procedures, we recruited worksites (and overweight/obese employees from enrolled worksites) from the North Carolina Community College System to participate in a weight loss study. Recruitment results at the worksite (organization) and employee levels are described, along with an assessment of representativeness. Eighty-one percent (48/59) of community colleges indicated initial interest in participating in the weight loss study, and of those, 17 colleges were enrolled. Few characteristics distinguished enrolled community colleges from unenrolled colleges in the overall system. Eligible employees (n = 1004) at participating colleges were enrolled in the weight loss study. On average, participants were aged 46.9 years (SD = 12.1 years), had a body mass index (BMI) of 33.6 kg/m(2) (SD = 7.9 kg/m(2)), 83.2% were White, 13.3% African American, 82.2% female, and 41.8% reported holding an advanced degree (master's or doctoral degree). Compared with the larger North Carolina Community College employee population, participants most often were women, but few other differences were observed. Employees with reduced computer access may have been less likely to participate, and limited data on unenrolled individuals or colleges were available. Community colleges are willing partners for weight loss intervention studies, and overweight/obese employees were receptive to joining a weight loss study offered in the workplace. The results from this study are useful for planning future worksite

  10. A qualitative examination of the role of small, rural worksites in obesity prevention.

    Science.gov (United States)

    Escoffery, Cam; Kegler, Michelle C; Alcantara, Iris; Wilson, Mark; Glanz, Karen

    2011-07-01

    The prevalence of overweight and obesity in the United States is highest in rural counties. We explored social support, policies, and programmatic resources that encourage more healthful diets and participation in physical activity among employees of small, rural worksites. We conducted in-depth interviews with 33 employed adults aged 50 years or older in rural Georgia about access to healthful foods and opportunities for physical activity at work; conversations about exercise, weight loss, and eating healthfully in general; and worksite nutrition and physical activity programs; and we asked for suggestions for making the worksite more healthful. The research team developed a codebook, and 2 coders coded each transcript. Data were analyzed and reports were generated for thematic analyses. Participants from rural worksites, most with fewer than 50 employees, cited lack of vending machines and cafeterias, health promotion programs to address healthful eating and exercise, and facilities for physical activity as barriers to eating healthfully and engaging in physical activity at work. Many participants reported conversations with coworkers about how to eat more healthfully by making more nutritious choices or preparing food more healthfully. Participants also discussed the importance of engaging in physical activity on their own and gave suggestions on ways to incorporate exercise into their routines. Participants' access to healthful foods at work varied, but barriers such as being too busy, worksite location, and no worksite cafeteria were noted. Some workers reported engaging in physical activity at work, and others reported a heavy workload and lack of time as barriers. Building on the social environment and implementing policies for healthful eating and participation in physical activity may help address obesity prevention in rural workplaces.

  11. [The association between the presence of occupational health nurses at Japanese worksites and health promotion activities].

    Science.gov (United States)

    Kanamori, Satoru; Kai, Yuko; Kawamata, Kayo; Kusumoto, Mari; Takamiya, Tomoko; Ohya, Yumiko; Odagiri, Yuko; Fukushima, Noritoshi; Inoue, Shigeru

    2015-01-01

    The purpose of this study was to determine the association between the presence of occupational health nurses and health promotion activities, relative to the number of employees, and the health promotion policies of the companies. We investigated 3,266 companies with at least 50 employees listed on the Tokyo Stock Exchange. Questionnaires were sent by mail, and employees in charge of health management or promotion were asked about health promotion activities at their own worksites. Logistic regression analysis was performed with each type of health promotion activity (nutrition, exercise, sleep, mental health, smoking cessation, alcohol consumption reduction, and oral health) as dependent variables, and the presence of an occupational health nurse as the independent variable. The results were adjusted for the type of industry, total number of company employees, presence of company health promotion policies, and the presence of an occupational health physician. Responses were received from 415 companies (response rate: 12.7%). Occupational health nurses were present at 172 companies (41.4%). Health promotion activities such as (in order of frequency) mental health (295 companies, 71.1%), smoking cessation (133, 32.0%), exercise (99, 23.9%), nutrition (75, 18.1%), oral health (49, 11.8%), sleep (39, 9.4%), and alcohol consumption reduction (26, 6.3%) were being conducted. Setting worksites with no occupational health nurse as a reference, the odds ratios of each health promotion activity of a worksite with one or more occupational health nurses were calculated. The odds ratios of mental health (2.43, 95% confidence interval: 1.32-4.48), smoking cessation (3.70, 2.14-6.38), exercise (4.98, 2.65-9.35), nutrition (8.34, 3.86-18.03), oral health (4.25, 1.87-9.62), and alcohol consumption reduction (8.96, 2.24-35.92) were significant. Stratified analysis using the number of worksite employees, 499 or fewer and 500 or more, also showed significantly higher odds ratios of

  12. Does work-site physical activity improve self-reported psychosocial workplace factors and job satisfaction?

    DEFF Research Database (Denmark)

    Roessler, K K; Rugulies, R; Bilberg, R

    2013-01-01

    PURPOSE: To investigate whether a work-site strength-training program has a positive effect on self-reported psychosocial workplace factors and job satisfaction. METHODS: We conducted a randomized controlled trial among laboratory technicians implementing neck and shoulder exercises for pain relief......, with 199 participants in the training group and 228 in the control group. Influence at work, sense of community, time pressure, and job satisfaction were measured with the Copenhagen Psychosocial Questionnaire at baseline and post-intervention after 20 weeks. RESULTS: There was no statistically significant...... of a work-site strength-training program on self-reported psychosocial workplace factors and job satisfaction....

  13. Worksite health promotion research: challenges, current state and future directions

    Directory of Open Access Journals (Sweden)

    Georg F. Bauer

    2007-12-01

    Full Text Available

    Background: Worksite health promotion (WHP addresses diverse individual and work-related health determinants. Thus, multiple, non-standardized interventions as well as company outcomes other than health have to be considered in WHP research.

    Methods: The article builds primarily on published research reviews in WHP and related fields. It discusses key practical and research challenges of the workplace setting. The evidence available on the effectiveness of WHP is summarised and conclusions are drawn for future WHP practice and research.

    Results: WHP research on health-oriented, behavioural interventions shows that the level of evidence ranges from suggestive to acceptable for key prevention areas such as physical activity, nutrition, fitness, smoking, alcohol and stress. Such interventions are effective if key conditions are met. Future research is needed on long-term effects, on multi-component programs and on programs, which address environmental determinants of health behaviour as well. Research on work-related determinants of health shows the economic and public health relevance of WHP interventions. Reviews of work-oriented, organisational interventions show that they produce a range of individual and organisational outcomes. However, due to the complexity of the organisational context, the generalisability and predictability of such outcomes remain limited.

    Conclusions: WHP research shows success factors of WHP and provides evidence of its effectiveness. In future, the evidence base should be expanded by developing adaptive, company-driven intervention approaches which allow for continuous optimisation of companies from a health perspective. Also, approaches for active dissemination of such a systemic-salutogenic occupational health management approach should be developed to increase the public health impact of WHP.

  14. Impact of individual and worksite environmental factors on water and sugar-sweetened beverage consumption among overweight employees.

    Science.gov (United States)

    Davy, Brenda M; You, Wen; Almeida, Fabio; Wall, Sarah; Harden, Samantha; Comber, Dana L; Estabrooks, Paul A

    2014-05-01

    The worksite environment may influence employees' dietary behaviors. Consumption of water and sugar-sweetened beverages (SSBs) affect weight management; however, little research has evaluated the influence of worksite factors on beverage consumption. Our purpose was to determine whether individual and worksite factors are associated with water and SSB intake among overweight and obese employees. Data were collected as part of baseline assessments for a worksite-based, weight-management intervention trial. Height and weight of participants (N = 1,482; 74% female; mean age = 47 y [standard deviation (SD) = 11 y]; mean weight = 208 lbs [SD = 46 lbs]) were assessed, and participants completed a validated beverage intake questionnaire. Environmental characteristics of worksites (N = 28) were audited. A qualitative comparative analysis (QCA) was used to identify worksite conditions that may support healthier beverage intake patterns. Most participants were white (75% of sample) with at least some college education or a college degree (approximately 82% of sample). Mean water and SSB intake were 27 fl oz (SD = 18 fl oz) and 17 fl oz (SD = 18 fl oz), respectively; SSB intake (191 kcal [SD = 218 kcal]) exceeded the recommended discretionary energy intake. Statistical models did not identify any significant predictors of water intake. Female sex and increasing level of education and household income were associated with lower SSB intake; baseline body weight and greater number of worksite water coolers and vending machines were associated with higher SSB intake. The QCA identified worksite type (ie, not manual labor) as a condition necessary for healthier beverage consumption; a worksite break policy of 2 or more per day may lead to unhealthy beverage consumption. Lower SSB consumption was noted among older participants, female participants, and among participants with higher education and income levels. Workplace factors influence beverage consumption among overweight

  15. Worksite element as causes of occupational accidents and illnesses in Malaysian residential construction industry

    Science.gov (United States)

    Hafiidz, J. Mohd; Arifin, K.; Aiyub, K.; Razman, M. R.; Samsurijan, M. S.; Syakir, M. I.

    2017-09-01

    Construction industry is an important sector that contributes to the development of economy and socioeconomy in Malaysia. It is a vital component in achieving the developed country status. However, fatalities in the Malaysian construction industry are a critical problem. Number of fatalities in this industry is the highest compared to other industries registered in Malaysia under the investigation of Department of Occupational Safety and Health (DOSH). Worksite element (worksite conditions, poor site management, construction tasks, and equipment & materials) was identified as one category of causes of occupational accidents and illnesses in Malaysian construction industry. The main objective of this study is to understand the perception of local construction personnel in terms of worksite element as causes of occupational accidents and illnesses in Malaysian residential construction industry. 13 housing projects that were registered with Ministry of Urban Wellbeing, Housing and Local Government and being permitted to perform construction work in 2012 were selected in Pulau Pinang to be studied using questionnaire survey. Worksite condition and poor site management was perceived as the most significant with the mean values of 3.68 and 3.61 respectively.

  16. An Evaluation of a Worksite Exercise Intervention Using the Social Cognitive Theory: A Pilot Study

    Science.gov (United States)

    Amaya, Megan; Petosa, R. L.

    2012-01-01

    Purpose: To increase exercise adherence among insufficiently active adult employees. Design: A quasi-experimental separate samples pre-test-post-test group design was used to compare treatment and comparison group. Setting: The worksite. Subjects: Employees (n = 127) who did not meet current American College of Sports Medicine (ACSM)…

  17. A worksite prevention program for construction workers: Design of a randomized controlled trial

    NARCIS (Netherlands)

    Oude Hengel, K.M.; Joling, C.I.; Proper, K.I.; Blatter, B.M.; Bongers, P.M.

    2010-01-01

    Background. A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program

  18. Effectiveness of physical activity programs at worksites with respect to work-related outcomes

    NARCIS (Netherlands)

    Proper, K.I.; Staal, B.J.; Hildebrandt, V.H.; Beek, A.J. van der; Mechelen, W. van

    2002-01-01

    This paper systematically reviews the literature on the effectiveness of physical activity programs at worksites with respect to work-related outcomes. A computerized literature search, a reference search, and a manual search of personal databases were performed using the following inclusion

  19. The effectiveness of worksite physical activity programs on physical activity, physical fitness, and health

    NARCIS (Netherlands)

    Proper, K.I.; Koning, M.; Beek, A.J. van der; Hildebrandt, V.H.; Bosscher, R.J.; Mechelen, W. van

    2003-01-01

    Objective: To critically review the literature with respect to the effectiveness of worksite physical activity programs on physical activity, physical fitness, and health. Data Sources: A search for relevant English-written papers published between 1980 and 2000 was conducted using MEDLINE, EMBASE,

  20. Costs, benefits and effectiveness of worksite physical activity counseling from the employer's perspective

    NARCIS (Netherlands)

    Proper, K.I.; Bruyne, M.C. de; Hildebrandt, V.H.; Beek, A.J. van der; Meerding, W.J.; Mechelen, W. van

    2004-01-01

    Objectives. This study evaluated the impact of worksite physical activity counseling using cost-benefit and cost-effectiveness analyses. Methods. Civil servants (N=299) were randomly assigned to an intervention (N=131) or control (N=168) group for 9 months. The intervention costs were compared with

  1. Effectiveness of a worksite mindfulness-based multi-component intervention on lifestyle behaviors

    NARCIS (Netherlands)

    van Berkel, J.; Boot, C.R.L.; Proper, K.I.; Bongers, P.M.; van der Beek, A.J.

    2014-01-01

    Introduction: Overweight and obesity are associated with an increased risk of morbidity. Mindfulness training could be an effective strategy to optimize lifestyle behaviors related to body weight gain. The aim of this study was to evaluate the effectiveness of a worksite mindfulness-based

  2. Implementing healthier foodservice guidelines in hospital and federal worksite cafeterias: barriers, facilitators and keys to success.

    Science.gov (United States)

    Jilcott Pitts, S B; Graham, J; Mojica, A; Stewart, L; Walter, M; Schille, C; McGinty, J; Pearsall, M; Whitt, O; Mihas, P; Bradley, A; Simon, C

    2016-12-01

    Healthy foodservice guidelines are being implemented in worksites and healthcare facilities to increase access to healthy foods by employees and public populations. However, little is known about the barriers to and facilitators of implementation. The present study aimed to examine barriers to and facilitators of implementation of healthy foodservice guidelines in federal worksite and hospital cafeterias. Using a mixed-methods approach, including a quantitative survey followed by a qualitative, in-depth interview, we examined: (i) barriers to and facilitators of implementation; (ii) behavioural design strategies used to promote healthier foods and beverages; and (iii) how implementation of healthy foodservice guidelines influenced costs and profitability. We used a purposive sample of five hospital and four federal worksite foodservice operators who recently implemented one of two foodservice guidelines: the United States Department of Health and Human Services/General Services Administration Health and Sustainability Guidelines ('Guidelines') in federal worksites or the Partnership for a Healthier America Hospital Healthier Food Initiative ('Initiative') in hospitals. Descriptive statistics were used to analyse quantitative survey data. Qualitative data were analysed using a deductive approach. Implementation facilitators included leadership support, adequate vendor selections and having dietitians assist with implementation. Implementation barriers included inadequate selections from vendors, customer complaints and additional expertise required for menu labelling. Behavioural design strategies used most frequently included icons denoting healthier options, marketing using social media and placement of healthier options in prime locations. Lessons learned can guide subsequent steps for future healthy foodservice guideline implementation in similar settings. © 2016 The British Dietetic Association Ltd.

  3. Strategies to promote healthier eating at worksites -analysis of experiences from a social shaping perspective

    DEFF Research Database (Denmark)

    Thorsen, Anne Vibeke; Jørgensen, Michael Søgaard; Lassen, Anne Dahl

    2005-01-01

    There is a strong need for strategies that can help promote healthy eating. The paper explores the shaping of initiatives aimed at promoting and implementing healthy eating in a worksite catering setting by analysing the sustainability of the intervention of healthier eating in a canteen model...

  4. The process evaluation of two interventions aimed at portion size in worksite cafeterias.

    NARCIS (Netherlands)

    Vermeer, W.M.; Leeuwis, F.H.; Koprulu, S.; Zouitni, O.; Seidell, J.C.; Steenhuis, I.H.M.

    2012-01-01

    Background: In a previous study, the effectiveness of introducing a small meal in addition to the existing size and a proportional pricing strategy have been assessed in Dutch worksite cafeterias. To assess the degree of implementation and to inform the design of future interventions, the present

  5. New Technologies in Screening for Disease Risk: Implications for the Worksite and for Health Education.

    Science.gov (United States)

    McLeroy, Kenneth R.

    The screening of workers for health problems has been ubiquitous in the worksite for many years. These screening procedures may have ethical and policy implications. Three common types of screening in use include pre-employment, early identification of health problems, and employee monitoring. Pre-employment screening may be used to screen out…

  6. Intervention Mapping as a framework for developing an intervention at the worksite for older construction workers.

    Science.gov (United States)

    Oude Hengel, Karen M; Joling, Catelijne I; Proper, Karin I; van der Molen, Henk F; Bongers, Paulien M

    2011-01-01

    The purpose of this study was to apply the Intervention Mapping approach as a framework in the development of a worksite intervention to improve the work ability of construction workers. Development of an intervention by using the Intervention Mapping approach. Construction worksite. Construction workers aged 45 years and older. According to the principles of Intervention Mapping, evidence from the literature was combined with data collected from stakeholders (e.g., construction workers, managers, providers). The Intervention Mapping approach resulted in an intervention with the following components: (1) two individual visits of a physical therapist to lower the physical workload, (2) a Rest-Break tool to improve the balance between work and recovery, and (3) two empowerment training sessions to increase the range of influence at the worksite. Application of Intervention Mapping in the development of a worksite prevention program was useful in the construction industry to obtain a positive attitude and commitment. Stakeholders could give input regarding the program components as well as provide specific leads for the practical intervention strategy. Moreover, it also gives insight in the current theoretical and empirical knowledge in the field of improving the work ability of older workers in the construction industry.

  7. Ethical considerations of worksite health promotion: an exploration of stakeholders' views.

    Science.gov (United States)

    van Berkel, Jantien; Meershoek, Agnes; Janssens, Rien M J P A; Boot, Cécile R L; Proper, Karin I; van der Beek, Allard J

    2014-05-16

    Developing, implementing and evaluating worksite health promotion requires dealing with all stakeholders involved, such as employers, employees, occupational physicians, insurance companies, providers, labour unions and research and knowledge institutes. Although worksite health promotion is becoming more common, empirical research on ethical considerations of worksite health promotion is scarce. We explored the views of stakeholders involved in worksite health promotion in focus group discussions and we described the ethical considerations that result from differences between these views. The focus group discussions were organised per stakeholder group. Data were analysed according to the constant comparison method. Our analyses show that although the definition of occupational health is the same for all stakeholders, namely 'being able to perform your job', there seem to be important differences in the views on what constitutes a risk factor to occupational health. According to the employees, risk factors to occupational health are prevailingly job-related. Labour unions agree with them, but other stakeholders, including the employer, particularly see employee-related issues such as lifestyle behaviour as risk factors to occupational health. The difference in definition of occupational health risk factors translates into the same categorisation of worksite health promotion; employee-related activities and work-related activities. The difference in conceptualisation of occupational health risk factors and worksite health promotion resonates in the way stakeholders understand 'responsibility' for lifestyle behaviour. Even though all stakeholders agree on whose responsibility lifestyle behaviour is, namely that of the employee, the meaning of 'responsibility' differs between employees, and employers. For employees, responsibility means autonomy, while for employers and other stakeholders, responsibility equals duty. This difference may in turn contribute to

  8. Ethical considerations of worksite health promotion: an exploration of stakeholders’ views

    Science.gov (United States)

    2014-01-01

    Background Developing, implementing and evaluating worksite health promotion requires dealing with all stakeholders involved, such as employers, employees, occupational physicians, insurance companies, providers, labour unions and research and knowledge institutes. Although worksite health promotion is becoming more common, empirical research on ethical considerations of worksite health promotion is scarce. Methods We explored the views of stakeholders involved in worksite health promotion in focus group discussions and we described the ethical considerations that result from differences between these views. The focus group discussions were organised per stakeholder group. Data were analysed according to the constant comparison method. Results Our analyses show that although the definition of occupational health is the same for all stakeholders, namely ‘being able to perform your job’, there seem to be important differences in the views on what constitutes a risk factor to occupational health. According to the employees, risk factors to occupational health are prevailingly job-related. Labour unions agree with them, but other stakeholders, including the employer, particularly see employee-related issues such as lifestyle behaviour as risk factors to occupational health. The difference in definition of occupational health risk factors translates into the same categorisation of worksite health promotion; employee-related activities and work-related activities. The difference in conceptualisation of occupational health risk factors and worksite health promotion resonates in the way stakeholders understand ‘responsibility’ for lifestyle behaviour. Even though all stakeholders agree on whose responsibility lifestyle behaviour is, namely that of the employee, the meaning of ‘responsibility’ differs between employees, and employers. For employees, responsibility means autonomy, while for employers and other stakeholders, responsibility equals duty. This

  9. A worksite prevention program for construction workers: design of a randomized controlled trial.

    Science.gov (United States)

    Oude Hengel, Karen M; Joling, Catelijne I; Proper, Karin I; Blatter, Birgitte M; Bongers, Paulien M

    2010-06-14

    A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1) two individual training sessions of a physical therapist to lower the physical workload, (2) a Rest-Break tool to improve the balance between work and recovery, and (3) two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. NTR1278.

  10. A worksite prevention program for construction workers: design of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Proper Karin I

    2010-06-01

    Full Text Available Abstract Background A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. Methods The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1 two individual training sessions of a physical therapist to lower the physical workload, (2 a Rest-Break tool to improve the balance between work and recovery, and (3 two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. Discussion The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. Trial Registration NTR1278

  11. Stability of edge states and edge magnetism in graphene nanoribbons

    OpenAIRE

    Kunstmann, Jens; Özdoğan, Cem; Quandt, Alexander; Fehske, Holger

    2010-01-01

    We critically discuss the stability of edge states and edge magnetism in zigzag edge graphene nanoribbons (ZGNRs). We point out that magnetic edge states might not exist in real systems, and show that there are at least three very natural mechanisms - edge reconstruction, edge passivation, and edge closure - which dramatically reduce the effect of edge states in ZGNRs or even totally eliminate them. Even if systems with magnetic edge states could be made, the intrinsic magnetism would not be ...

  12. Nanoindentation near the edge

    Science.gov (United States)

    J.E. Jakes; C.R. Frihart; J.F. Beecher; R.J. Moon; P.J. Resto; Z.H. Melgarejo; O.M. Saurez; H. Baumgart; A.A. Elmustafa; D.S. Stone

    2009-01-01

    Whenever a nanoindent is placed near an edge, such as the free edge of the specimen or heterophase interface intersecting the surface, the elastic discontinuity associated with the edge produces artifacts in the load-depth data. Unless properly handled in the data analysis, the artifacts can produce spurious results that obscure any real trends in properties as...

  13. Prevalence of Physical Activity Policies and Environmental Strategies in Communities and Worksites: The Iowa Community Transformation Grant.

    Science.gov (United States)

    Lillehoj, Catherine J; Daniel-Ulloa, Jason D; Nothwehr, Faryle

    2016-01-01

    This study describes results of community and worksite assessments of physical activity policies and environmental strategies in 26 Iowa counties. Community coalition members completed the Community Health Assessment and Group Evaluation tool. The study explored findings using descriptive statistics and examined rural-urban differences in two of the five assessed sectors: community and worksites. Lower community scores (ie, needing improvement) were found for complete streets, bicycle use, and street calming. Higher scores (ie, identified strengths) were found for land use plans, maintain parks, and sidewalks Americans with Disabilities Act compliant. Worksites scored lower on promote stairwells, encourage non-motorized commuting, and implement activity breaks but higher on subsidize gym membership and provide area for physical activity. No rural-urban differences were found. Results identify opportunities to enhance community and worksite policies and environmental strategies to increase physical activity.

  14. An edge pedestal model

    International Nuclear Information System (INIS)

    Stacev, W.M.

    2001-01-01

    A new model for calculation of the gradient scale lengths in the edge pedestal region and of the edge transport barrier width in H-mode tokamak plasmas will be described. Model problem calculations which demonstrate the promise of this model for predicting experimental pedestal properties will be discussed. The density and Prague gradient scale lengths (L) in the edge are calculated from the particle and ion and electron energy radial transport equations, making use of (presumed) known particle and energy fluxes flowing across the edge transport barrier from the core into the SOL and of edge transport coefficients. The average values of the particle and heat fluxes in the edge transport barrier are calculated in terms of the fluxes crossing into the SOL and the atomic physics reaction rates (ionisation, charge-exchange, elastic scattering, impurity radiation) in the edge by integrating the respective transport equations from the pedestal to the separatrix. An important implication of this model is that the pedestal gradient scale lengths depend not just on local pedestal platers properties but also on particle and energy fluxes from the core plasma and on recycling neutral fluxes that penetrate into the plasma edge, both of which in turn depend on the pedestal properties. The MHD edge pressure gradient constraint α≤ α C is used to determine the pressure width of the edge transport barrier, Δ TB = Δ TB (α c ). Three different models for the MHD edge pressure gradient constraint have been investigated: (1) nominal ideal ballooning mode theory, (2) ballooning mode theory taking into account the edge geometry and shear to access He second stability region; and pedestal β-limit theory when the ballooning modes are stabilised by diamagnetic effects. A series of calculations have been made for a DIII-D model problem. The calculated gradient scale lengths and edge transport barrier widths are of the magnitude of values observed experimentally, and certain trends

  15. Worksite Environmental Interventions for Obesity Prevention and Control: Evidence from Group Randomized Trials.

    Science.gov (United States)

    Fernandez, Isabel Diana; Becerra, Adan; Chin, Nancy P

    2014-06-01

    Worksites provide multiple advantages to prevent and treat obesity and to test environmental interventions to tackle its multiple causal factors. We present a literature review of group-randomized and non-randomized trials that tested worksite environmental, multiple component interventions for obesity prevention and control paying particular attention to the conduct of formative research prior to intervention development. The evidence on environmental interventions on measures of obesity appears to be strong since most of the studies have a low (4/8) and unclear (2/8) risk of bias. Among the studies reviewed whose potential risk of bias was low, the magnitude of the effect was modest and sometimes in the unexpected direction. None of the four studies describing an explicit formative research stage with clear integration of findings into the intervention was able to demonstrate an effect on the main outcome of interest. We present alternative explanation for the findings and recommendations for future research.

  16. Assessing Management Support for Worksite Health Promotion: Psychometric Analysis of the Leading by Example (LBE) Instrument

    Science.gov (United States)

    Della, Lindsay J.; DeJoy, David M.; Goetzel, Ron Z.; Ozminkowski, Ronald J.; Wilson, Mark G.

    2009-01-01

    Objective This paper describes the development of the Leading by Example (LBE) instrument. Methods Exploratory factor analysis was used to obtain an initial factor structure. Factor validity was evaluated using confirmatory factor analysis methods. Cronbach’s alpha and item-total correlations provided information on the reliability of the factor subscales. Results Four subscales were identified: business alignment with health promotion objectives; awareness of the health-productivity link; worksite support for health promotion; leadership support for health promotion. Factor by group comparisons revealed that the initial factor structure is effective in detecting differences in organizational support for health promotion across different employee groups Conclusions Management support for health promotion can be assessed using the LBE, a brief, self-report questionnaire. Researchers can use the LBE to diagnose, track, and evaluate worksite health promotion programs. PMID:18517097

  17. Dietary interventions to prevent and manage diabetes in worksite settings: a meta-analysis

    OpenAIRE

    Shrestha, Archana; Karmacharya, Biraj Man; Khudyakov, Polyna; Weber, Mary Beth; Spiegelman, Donna

    2017-01-01

    Objectives: The translation of lifestyle intervention to improve glucose tolerance into the workplace has been rare. The objective of this meta-analysis is to summarize the evidence for the effectiveness of dietary interventions in worksite settings on lowering blood sugar levels. Methods: We searched for studies in PubMed, Embase, Econlit, Ovid, Cochrane, Web of Science, and Cumulative Index to Nursing and Allied Health Literature. Search terms were as follows: (1) Exposure-based: nutrition/...

  18. Implementation of a worksite educational program focused on promoting healthy eating habits

    OpenAIRE

    Tanagra, Dimitra; Panidis, Dimitris; Tountas, Yannis; Remoudaki, Elina; Alexopoulos, Evangelos C.

    2014-01-01

    Objective: To estimate the effectiveness of a short-term educational-counseling worksite program focused on lipid intake, by monitoring the possible change on nutrition knowledge and eating habits. Methods: an 8-week educational program based on the Health Belief Model was implemented in a honey packaging and sales company in Greece. 20 out of the 29 employees initially enrolled completed the program. Knowledge level and eating habits were evaluated prior and after the intervention by the “Nu...

  19. Healthy meals at worksite canteens - Social shaping as a framework for understanding sustainable interventions

    OpenAIRE

    Thorsen, Anne Vibeke; Jørgensen, Michael Søgaard; Mikkelsen, Bent Egberg

    2010-01-01

    The challenge of public health nutrition in relation to worksite settings is to improve access to healthier meal options – especially for the groups with a lower educational level. Strategies changing the dietary environment such as increasing the availability of healthy food and reducing barriers towards healthy eating may help consumers change dietary behavior and meet the guidelines for a healthy diet. The sustainability of interventions is found to be a central challenge in public health ...

  20. Consumer attitudes, barriers, and meal satisfaction associated with sodium-reduced meal intake at worksite cafeterias.

    Science.gov (United States)

    Lee, Jounghee; Park, Sohyun

    2015-12-01

    Targeting consumers who consume lunches at their worksite cafeterias would be a valuable approach to reduce sodium intake in South Korea. To assess the relationships between socio-demographic factors, consumer satisfaction, attitudes, barriers and the frequency of sodium-reduced meal intake. We implemented a cross-sectional research, analyzing data from 738 consumers aged 18 years or older (327 males and 411 females) at 17 worksite cafeterias in South Korea. We used the ordinary least squares regression analysis to determine the factors related to overall satisfaction with sodium-reduced meal. General linear models with LSD tests were employed to examine the variables that differed by the frequency of sodium-reduced meal intake. Most subjects always or usually consumed the sodium-reduced meal (49%), followed by sometimes (34%) and rarely or never (18%). Diverse menus, taste and belief in the helpfulness of the sodium-reduced meal significantly increased overall satisfaction with the sodium-reduced diet (P < 0.05). We found importance of needs in the following order: 1) 'menu diversity' (4.01 points), 2) 'active promotion' (3.97 points), 3) 'display of nutrition labels in a visible location' (3.96 points), 4) 'improvement of taste' (3.88 points), and 5) 'education of sodium-reduction self-care behaviors' (3.82 points). Dietitians could lead consumers to choose sodium-reduced meals by improving their taste and providing diverse menus for the sodium-reduced meals at worksite cafeterias.

  1. Evaluation of a Worksite Diabetes Education Program at a Large Urban Medical Center.

    Science.gov (United States)

    Renda, Susan; Baernholdt, Marianne; Becker, Kathleen

    2016-01-01

    Evidence suggests that diabetes education can be delivered at the worksite to better support employees' diabetes self-management and improve productivity and health care costs. This study was conducted to address the feasibility of a diabetes worksite education program for employees at a large urban academic health care institution. The diabetes education program was delivered in the diabetes center at the institution, a resource that was previously underutilized by employees. Through collaboration with groups in the institution, 20 employees of diverse ethnicity participated in the worksite diabetes education program with positive outcomes: improved glycemic control measured (HbA1c), attainment of self-management goals, and satisfaction with the program. Work absences trended downward, but numbers of hospitalizations and emergency department visits were unchanged in the 3 months following education. Recommendations include replication of the study with more employee participation and program evaluation over a longer period of time to continue assessment of employees' educational needs. © 2015 The Author(s).

  2. Adapting a natural (lay) helpers model of change for worksite health promotion for women.

    Science.gov (United States)

    Tessaro, I A; Taylor, S; Belton, L; Campbell, M K; Benedict, S; Kelsey, K; DeVellis, B

    2000-10-01

    Social network interventions that utilize informal systems of helping can be an important strategy for health promotion change. This article describes the development, implementation and evaluation of a natural (lay) helping intervention for health promotion change, specifically designed for women in small rural blue-collar worksites. One hundred and four women in four intervention worksites were recruited as natural helpers, and received health and skill-building education over an 18-month period. Qualitative evaluation showed: (1) two patterns of natural helping for women, i.e. participation due to a specific health concern with either themselves or others in their personal networks, and participation due to a larger sense of the importance of health and prevention; (2) over time natural helpers expanded the diffusion of health promotion information from close network members to co-workers and were more likely to be approached by their co-workers for information; (3) group activities at the worksite, particularly around physical activity, increased over time; and (4) because of time constraints at the workplace, written materials were a major way of spreading information to co-workers. This study shows that women can be recruited and trained to diffuse health promotion information and provide support to co-workers for health behavior change.

  3. FUEL Your Life: A Translation of the Diabetes Prevention Program to Worksites.

    Science.gov (United States)

    Wilson, Mark G; DeJoy, David M; Vandenberg, Robert; Padilla, Heather; Davis, Marsha

    2016-01-01

    To evaluate the effectiveness of FUEL Your Life, a translation of the Diabetes Prevention Program for worksites. A randomized control group design was conducted in five worksites of a large transportation company. Measures were collected pretest, posttest (6 months), and follow-up (12 months). Railroad maintenance facilities of Union Pacific Railroad. Participants consisted of 362 workers (227 treatment, 135 control). FUEL Your Life was translated from the Diabetes Prevention Program to better fit within the context of the worksite. The primary difference was the use of peer health coaches to provide social support and reinforcement and an occupational nurse to provide lesson content (six sessions of 10 minutes) to participants instead of the lifestyle coaches employed by the Diabetes Prevention Program, resulting in a less structured meeting schedule. The primary outcomes were weight and body mass index (BMI), with secondary outcomes including eating behaviors, physical activity, and social support. Latent growth modeling was used to measure changes in the outcomes over time. Participants in the intervention group maintained weight/BMI (-.1 pounds/-.1 BMI), whereas the control participants gained weight/BMI (+2.6 pounds/+.3 BMI), resulting in a statistically significant difference between groups. Fifty-five percent of intervention participants lost some weight, whereas only 35% of the control group lost weight. FUEL Your Life, a low intensity intervention, was not effective for promoting weight loss, but was effective for helping workers maintain weight over a 12-month period.

  4. Corporate characteristics and worksite health promotion programs: survey findings from Fortune 500 companies.

    Science.gov (United States)

    Hollander, R B; Lengermann, J J

    1988-01-01

    A study was carried out to assess the nature and extent of worksite health promotion programs in Fortune 500 companies. Growth and interest in worksite health promotion continues at a remarkable rate. Fortune 500 firms are a good barometer of the state of the art of programs in work settings because these companies have large numbers of employees, an interest in cost savings, and expertise to invest in innovative efforts. Data collection consisted of questionnaires sent to the medical officer or Chief Executive Officer of all companies appearing on the 1984 Fortune 500 list. The following issues were addressed: whether companies offered worksite programs; what health promotion activities were provided in their programs; whether organizations had plans to start up or expand programs; what organizational support existed for programs (i.e. who pays, on whose time employees participate, when activities are offered, and what types of personnel are hired to staff programs); and whether these companies applied needs assessments, evaluation and cost analysis in their programs. Differences in these characteristics were examined in relation to the organizational variables of size (number of employees), Fortune 500 rank and type of industry (low-technology versus high-technology). The response rate for the survey was 49.4% (n = 247). Results of the study indicate a high level of health promotion activity in Fortune 500 firms. Out of the total group of respondents, two-thirds (n = 164) report having worksite programs and two-thirds of organizations with programs have plans to expand their health promotion offerings. One-third of responding organizations without programs planned to initiate them. The health promotion activities provided are numerous and varied, and within units that have programs rates of employee eligibility are reported to be high. However, the participation rates reported are appreciably lower. It is of special interest that, in general, the higher ranked

  5. Management of Sodium-reduced Meals at Worksite Cafeterias: Perceptions, Practices, Barriers, and Needs among Food Service Personnel.

    Science.gov (United States)

    Lee, Jounghee; Park, Sohyun

    2016-04-01

    The sodium content of meals provided at worksite cafeterias is greater than the sodium content of restaurant meals and home meals. The objective of this study was to assess the relationships between sodium-reduction practices, barriers, and perceptions among food service personnel. We implemented a cross-sectional study by collecting data on perceptions, practices, barriers, and needs regarding sodium-reduced meals at 17 worksite cafeterias in South Korea. We implemented Chi-square tests and analysis of variance for statistical analysis. For post hoc testing, we used Bonferroni tests; when variances were unequal, we used Dunnett T3 tests. This study involved 104 individuals employed at the worksite cafeterias, comprised of 35 men and 69 women. Most of the participants had relatively high levels of perception regarding the importance of sodium reduction (very important, 51.0%; moderately important, 27.9%). Sodium reduction practices were higher, but perceived barriers appeared to be lower in participants with high-level perception of sodium-reduced meal provision. The results of the needs assessment revealed that the participants wanted to have more active education programs targeting the general population. The biggest barriers to providing sodium-reduced meals were use of processed foods and limited methods of sodium-reduced cooking in worksite cafeterias. To make the provision of sodium-reduced meals at worksite cafeterias more successful and sustainable, we suggest implementing more active education programs targeting the general population, developing sodium-reduced cooking methods, and developing sodium-reduced processed foods.

  6. Worksite Tobacco Prevention: A Randomized, Controlled Trial of Adoption, Dissemination Strategies, and Aggregated Health-Related Outcomes across Companies

    Directory of Open Access Journals (Sweden)

    Verena Friedrich

    2015-01-01

    Full Text Available Evidence based public health requires knowledge about successful dissemination of public health measures. This study analyses (a the changes in worksite tobacco prevention (TP in the Canton of Zurich, Switzerland, between 2007 and 2009; (b1 the results of a multistep versus a “brochure only” dissemination strategy; (b2 the results of a monothematic versus a comprehensive dissemination strategy that aim to get companies to adopt TP measures; and (c whether worksite TP is associated with health-related outcomes. A longitudinal design with randomized control groups was applied. Data on worksite TP and health-related outcomes were gathered by a written questionnaire (baseline n=1627; follow-up n=1452 and analysed using descriptive statistics, nonparametric procedures, and ordinal regression models. TP measures at worksites improved slightly between 2007 and 2009. The multistep dissemination was superior to the “brochure only” condition. No significant differences between the monothematic and the comprehensive dissemination strategies were observed. However, improvements in TP measures at worksites were associated with improvements in health-related outcomes. Although dissemination was approached at a mass scale, little change in the advocated adoption of TP measures was observed, suggesting the need for even more aggressive outreach or an acceptance that these channels do not seem to be sufficiently effective.

  7. Worksite Tobacco Prevention: A Randomized, Controlled Trial of Adoption, Dissemination Strategies, and Aggregated Health-Related Outcomes across Companies.

    Science.gov (United States)

    Friedrich, Verena; Brügger, Adrian; Bauer, Georg F

    2015-01-01

    Evidence based public health requires knowledge about successful dissemination of public health measures. This study analyses (a) the changes in worksite tobacco prevention (TP) in the Canton of Zurich, Switzerland, between 2007 and 2009; (b1) the results of a multistep versus a "brochure only" dissemination strategy; (b2) the results of a monothematic versus a comprehensive dissemination strategy that aim to get companies to adopt TP measures; and (c) whether worksite TP is associated with health-related outcomes. A longitudinal design with randomized control groups was applied. Data on worksite TP and health-related outcomes were gathered by a written questionnaire (baseline n = 1627; follow-up n = 1452) and analysed using descriptive statistics, nonparametric procedures, and ordinal regression models. TP measures at worksites improved slightly between 2007 and 2009. The multistep dissemination was superior to the "brochure only" condition. No significant differences between the monothematic and the comprehensive dissemination strategies were observed. However, improvements in TP measures at worksites were associated with improvements in health-related outcomes. Although dissemination was approached at a mass scale, little change in the advocated adoption of TP measures was observed, suggesting the need for even more aggressive outreach or an acceptance that these channels do not seem to be sufficiently effective.

  8. Edge effects in composites

    International Nuclear Information System (INIS)

    Guz, A.N.; Kokhanenko, Yu.V.

    1995-01-01

    In the present article we survey papers on edge effects investigated by the rigorous approach. We interpret edge effects as stressed states created in a composite as a result of zones in which the stresses exhibit a rapidly changing behavior in comparison with the slow variation of the stresses outside such zones. Here the range of the edge effect is defined as the distance from the point of its inception to the boundary of the edge zone in a given direction. The transition of the stresses to the slowly varying state is determined within prescribed error limits. The size and configuration of the edge zone depends on the tolerated error. Clearly, the main difficulty associated with the rigorous approach is finding solutions of the elasticity problems. The finite-difference approach is suggested for the approximate solution of these problems. In light of the comparative time consumption of the finite-difference approach, it is best directed at certain classes of problems rather than at particular individual problems. Not too many papers on the investigation of edge effects by the rigorous approach have been published to date. Below, following in their footsteps, we formulate edge effect problems in composites, determine classes of problems, and investigate edge effects in composite materials and structural elements using them in Cartesian (planar and three-dimensional problems) and cylindrical (axisymmetric problems) coordinate frames. We note that the division of approaches to the study of edge effects into qualitative (nonrigorous) and quantitative (rigorous) reflects the authors own point of view. Of course, other schemes of classification of the approaches to the investigation of the regions of rapidly varying states in composites are possible

  9. Edge colouring by total labellings

    DEFF Research Database (Denmark)

    Brandt, Stephan; Rautenbach, D.; Stiebitz, M.

    2010-01-01

    We introduce the concept of an edge-colouring total k-labelling. This is a labelling of the vertices and the edges of a graph G with labels 1, 2, ..., k such that the weights of the edges define a proper edge colouring of G. Here the weight of an edge is the sum of its label and the labels of its...

  10. Adobe Edge Quickstart Guide

    CERN Document Server

    Labrecque, Joseph

    2012-01-01

    Adobe Edge Quickstart Guide is a practical guide on creating engaging content for the Web with Adobe's newest HTML5 tool. By taking a chapter-by-chapter look at each major aspect of Adobe Edge, the book lets you digest the available features in small, easily understandable chunks, allowing you to start using Adobe Edge for your web design needs immediately. If you are interested in creating engaging motion and interactive compositions using web standards with professional tooling, then this book is for you. Those with a background in Flash Professional wanting to get started quickly with Adobe

  11. Making Healthy Behaviors the Easy Choice for Employees: A Review of the Literature on Environmental and Policy Changes in Worksite Health Promotion

    Science.gov (United States)

    Kahn-Marshall, Jennifer L.; Gallant, Mary P.

    2012-01-01

    As employers look for ways to reduce rising health care costs, worksite health promotion interventions are increasingly being used to improve employee health behaviors. An alternative approach to traditional worksite health promotion programs is the implementation of environmental and/or policy changes to encourage employees to adopt healthier…

  12. Adobe Edge Preview 3

    CERN Document Server

    Grover, Chris

    2011-01-01

    Want to use an Adobe tool to design animated web graphics that work on iPhone and iPad? You've come to the right book. Adobe Edge Preview 3: The Missing Manual shows you how to build HTML5 graphics using simple visual tools. No programming experience? No problem. Adobe Edge writes the underlying code for you. With this eBook, you'll be designing great-looking web elements in no time. Get to know the workspace. Learn how Adobe Edge Preview 3 performs its magic.Create and import graphics. Make drawings with Edge's tools, or use art you designed in other programs.Work with text. Build menus, lab

  13. Pavement edge treatment.

    Science.gov (United States)

    2013-01-01

    Four projects were built over two construction seasons using special devices attached to the paving machine that produces a 30 slope on the outside pavement edge instead of the near vertical drop-off common with conventional paving equipment. This ...

  14. Development and Validity Testing of the Worksite Health Index: An Assessment Tool to Help and Improve Korean Employees' Health-Related Outcome.

    Science.gov (United States)

    Yun, Young Ho; Sim, Jin Ah; Lim, Ye Jin; Lim, Cheol Il; Kang, Sung-Choon; Kang, Joon-Ho; Park, Jun Dong; Noh, Dong Young

    2016-06-01

    The objective of this study was to develop the Worksite Health Index (WHI) and validate its psychometric properties. The development of the WHI questionnaire included item generation, item construction, and field testing. To assess the instrument's reliability and validity, we recruited 30 different Korean worksites. We developed the WHI questionnaire of 136 items categorized into five domains, namely Governance and Infrastructure, Need Assessment and Planning, Health Prevention and Promotion Program, Occupational Safety, and Monitoring and Feedback. All WHI domains demonstrated a high reliability with good internal consistency. The total WHI scores differentiated worksite groups effectively according to firm size. Each domain was associated significantly with employees' health status, absence, and financial outcome. The WHI can assess comprehensive worksite health programs. This tool is publicly available for addressing the growing need for worksite health programs.

  15. Edge Simulation Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Krasheninnikov, Sergei I. [Univ. of California, San Diego, CA (United States); Angus, Justin [Univ. of California, San Diego, CA (United States); Lee, Wonjae [Univ. of California, San Diego, CA (United States)

    2018-01-05

    The goal of the Edge Simulation Laboratory (ESL) multi-institutional project is to advance scientific understanding of the edge plasma region of magnetic fusion devices via a coordinated effort utilizing modern computing resources, advanced algorithms, and ongoing theoretical development. The UCSD team was involved in the development of the COGENT code for kinetic studies across a magnetic separatrix. This work included a kinetic treatment of electrons and multiple ion species (impurities) and accurate collision operators.

  16. Reduced-portion entrées in a worksite and restaurant setting: impact on food consumption and waste.

    Science.gov (United States)

    Berkowitz, Sarah; Marquart, Len; Mykerezi, Elton; Degeneffe, Dennis; Reicks, Marla

    2016-11-01

    Large portion sizes in restaurants have been identified as a public health risk. The purpose of the present study was to determine whether customers in two different food-service operator segments (non-commercial worksite cafeteria and commercial upscale restaurant) would select reduced-portion menu items and the impact of selecting reduced-portion menu items on energy and nutrient intakes and plate waste. Consumption and plate waste data were collected for 5 weeks before and 7 weeks after introduction of five reduced-size entrées in a worksite lunch cafeteria and for 3 weeks before and 4 weeks after introduction of five reduced-size dinner entrées in a restaurant setting. Full-size entrées were available throughout the entire study periods. A worksite cafeteria and a commercial upscale restaurant in a large US Midwestern metropolitan area. Adult worksite employees and restaurant patrons. Reduced-size entrées accounted for 5·3-12·8 % and 18·8-31·3 % of total entrées selected in the worksite and restaurant settings, respectively. Food waste, energy intake and intakes of total fat, saturated fat, cholesterol, Na, fibre, Ca, K and Fe were significantly lower when both full- and reduced-size entrées were served in the worksite setting and in the restaurant setting compared with when only full-size entrées were served. A relatively small proportion of reduced-size entrées were selected but still resulted in reductions in overall energy and nutrient intakes. These outcomes could serve as the foundation for future studies to determine strategies to enhance acceptance of reduced-portion menu items in restaurant settings.

  17. Does a grill menu redesign influence sales, nutrients purchased, and consumer acceptance in a worksite cafeteria?

    Directory of Open Access Journals (Sweden)

    Maya K. Vadiveloo

    2017-12-01

    Full Text Available Worksite cafeterias are compelling venues to improve diet quality through environmental changes.We conducted a pre-post study to evaluate how a cafeteria-initiated grill menu redesign influenced sales, revenue, and nutrient content of foods purchased. Secondly, we evaluated consumer opinions about menu changes to inform practices for worksite environment interventions. Monthly sales data (2012–2015 were used to compute gross sales and revenue of entrées and side dishes pre-post menu changes. Alternative protein sources replaced red meat; nutrient composition and nutrients purchased were compared using Food Pro software. Consumer responses were queried using online surveys; open-ended responses were analyzed using NVivo. Differences in sales and nutrient content pre-post menu redesign were tested with Wilcoxon Rank Sum tests. Gross sales of entrées (61 vs. 222servings/month; p=0.01 and side dishes (120 vs. 365servings/month; p=0.001 increased more than three-fold post-menu changes. Revenue from entrées (312 vs. 1144USD/month; p=0.01 and side dishes (238 vs. 914USD/month; p=0.001 also increased; per entrée, consumers purchased significantly more unsaturated fat (5g, and less saturated fat (3g and sodium (100mg. For side dishes, they purchased fewer calories (48kcal and unsaturated fat (2.9g, but more fiber (1.8g, and sodium (260mg. Four themes emerged from consumer responses: the importance of 1 variety, novelty, choice; 2 cost, affordability, value; 3 health; and 4 food quality, taste. Menu redesign can improve nutrient content, while also increasing sales and revenue. Multi-dimensional assessment of the nutritional, consumer, and retailer implications is desirable practice for enacting similar environmental changes. Keywords: Worksite health promotion, Food environment change, Consumer satisfaction, Menu redesign, Sales and revenue

  18. Worksite Health Program Promoting Changes in Eating Behavior and Health Attitudes.

    Science.gov (United States)

    Mache, Stefanie; Jensen, Sarah; Jahn, Reimo; Steudtner, Mirko; Ochsmann, Elke; Preuß, Geraldine

    2015-11-01

    The aim of the present study was to evaluate the effectiveness of a worksite multicomponent health promotion intervention on eating behavior and attitudes, changes in body weight, and readiness to make eating behavior changes among workers over a 12-month intervention period. A total of 3,095 workers of a logistic company participated in a quasi-experimental comparison group study design. The intervention group received a multicomponent health training. Two of the main elements of the multicomponent intervention were physical exercise training and nutrition counseling/training. During the pilot year, participants completed a survey at baseline and again after 12 months to assess physical activity-, health-, and diet-related factors. Results showed that participants' body weight did not significantly decrease in the intervention group. Mean weight loss in the intervention groups was 0.5 kg (body mass index = 0.1 kg/m(2)). Eating behaviors in the intervention group improved more than in the comparison group. Some positive intervention effects were observed for the cognitive factors (e.g., changes in eating attitudes). Baseline readiness to change eating behavior was significantly improved over time. We demonstrated initial results of a long-term multicomponent worksite health promotion program with regard to changes in body weight, eating behavior, and attitudes. This evaluation of a 12-month pilot study suggests that a worksite health promotion program may lead to improvements in nutritional health behaviors for a number of workers. An investigation of long-term effects of this multicomponent intervention is strongly recommended. © 2015 Society for Public Health Education.

  19. Selected aspects of worksite health promotion (WHP in the Czech republic

    Directory of Open Access Journals (Sweden)

    Radim Šlachta

    2010-03-01

    Full Text Available The World Health Organisation (WHO and other internationally active Worksite Health Promotion (WHP organizations co-ordinately aim to implement a healthy lifestyle by health programmes. They also specify general principles to prevent the mass occurrence of non-infectious diseases in the world. Recommended programs are in developed countries usually implemented by administrative institutions and authorities and their results are evaluated. This paper aims to evaluate the implementation of recommended programmes in the Czech Republic by specific aspects - cultural, legislative, medical, economic etc. The paper is an introductory study in a complex and comprehensive interdisciplinary field of human health in the context of workplace and sustainable social development.

  20. Factors influencing participation in worksite wellness programs among minority and underserved populations.

    Science.gov (United States)

    Thompson, Sharon E; Smith, Brenda A; Bybee, Ronald F

    2005-01-01

    In the United States, employers and employees are increasingly paying a larger portion of the nation's healthcare bill. Preventive measures are being employed by businesses in an effort to contain the escalating costs of employee healthcare. The work site is an ideal setting for health promotion because 130 million Americans are employed and spend one third of their time at work. However, unhealthy workers tend to be the least likely to participate in health promotion activities. Worksite Wellness Programs must be designed to engage segments of the work force with the greatest health needs. Culturally sensitive and appropriate programs must be developed to engage economically challenged minority and other underserved populations.

  1. A feasibility study on worksite visualization system using augmented reality for Fugen NPP

    International Nuclear Information System (INIS)

    Izumi, Masanori; Shimoda, Hiroshi; Ishii, Hirotake

    2010-01-01

    Fugen Nuclear Power Plant, Advanced Thermal Reactor, was permanently shut down in March 2003 and it is at the decommissioning stage. Decommissioning Engineering Support System, DEXUS, has been developed to help planning of the optimal dismantling process and for carrying out the dismantling work safely and efficiently. Worksite Visualization System (WVS), as part of Dismantling Work Support System of DEXUS, has been developed to support the field workers to deal with the information on the dismantling facilities comprehensibly and intuitively. In this article, outline of the dismantling process of Fugen is first introduced, then a feasibility study on WVS is described. (author)

  2. Population health management as a strategy for creation of optimal healing environments in worksite and corporate settings.

    Science.gov (United States)

    Chapman, Larry S; Pelletier, Kenneth R

    2004-01-01

    This paper provides an (OHE) overview of a population health management (PHM) approach to the creation of optimal healing environments (OHEs) in worksite and corporate settings. It presents a framework for consideration as the context for potential research projects to examine the health, well-being, and economic effects of a set of newer "virtual" prevention interventions operating in an integrated manner in worksite settings. The main topics discussed are the fundamentals of PHM with basic terminology and core principles, a description of PHM core technology and implications of a PHM approach to creating OHEs.

  3. The Edge supersonic transport

    Science.gov (United States)

    Agosta, Roxana; Bilbija, Dushan; Deutsch, Marc; Gallant, David; Rose, Don; Shreve, Gene; Smario, David; Suffredini, Brian

    1992-01-01

    As intercontinental business and tourism volumes continue their rapid expansion, the need to reduce travel times becomes increasingly acute. The Edge Supersonic Transport Aircraft is designed to meet this demand by the year 2015. With a maximum range of 5750 nm, a payload of 294 passengers and a cruising speed of M = 2.4, The Edge will cut current international flight durations in half, while maintaining competitive first class, business class, and economy class comfort levels. Moreover, this transport will render a minimal impact upon the environment, and will meet all Federal Aviation Administration Part 36, Stage III noise requirements. The cornerstone of The Edge's superior flight performance is its aerodynamically efficient, dual-configuration design incorporating variable-geometry wingtips. This arrangement combines the benefits of a high aspect ratio wing at takeoff and low cruising speeds with the high performance of an arrow-wing in supersonic cruise. And while the structural weight concerns relating to swinging wingtips are substantial, The Edge looks to ever-advancing material technologies to further increase its viability. Heeding well the lessons of the past, The Edge design holds economic feasibility as its primary focus. Therefore, in addition to its inherently superior aerodynamic performance, The Edge uses a lightweight, largely windowless configuration, relying on a synthetic vision system for outside viewing by both pilot and passengers. Additionally, a fly-by-light flight control system is incorporated to address aircraft supersonic cruise instability. The Edge will be produced at an estimated volume of 400 aircraft and will be offered to airlines in 2015 at $167 million per transport (1992 dollars).

  4. Properties on the edge: graphene edge energies, edge stresses, edge warping, and the Wulff shape of graphene flakes

    International Nuclear Information System (INIS)

    Branicio, Paulo S; Jhon, Mark H; Gan, Chee Kwan; Srolovitz, David J

    2011-01-01

    It has been shown that the broken bonds of an unreconstructed graphene edge generate compressive edge stresses leading to edge warping. Here, we investigate edge energies and edge stresses of graphene nanoribbons with arbitrary orientations from armchair to zigzag, considering both flat and warped edge shapes in the presence and absence of hydrogen. We use the second generation reactive empirical bond order potential to calculate the edge energies and stresses for clean and hydrogenated edges. Using these energies, we perform a Wulff construction to determine the equilibrium shapes of flat graphene flakes as a function of hydrogen chemical potential. While edge stresses for clean, flat edges are compressive, they become tensile if allowed to warp. Conversely, we find that edge energies change little (∼1%) with edge warping. Hydrogenation of the edges virtually eliminates both the edge energy and edge stresses. For warped edges an approximately linear relationship is found between amplitudes and wavelengths. The equilibrium shape of a graphene flake is determined by the value of the hydrogen chemical potential. For very small (and large) values of it the flakes have a nearly hexagonal (dodecagon) shape with zigzag oriented edges, while for intermediate values graphene flakes are found with complex shapes

  5. Theory of edge radiation

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, G.; Kocharyan, V.; Saldin, E.; Schneidmiller, E.; Yurkov, M.

    2008-08-15

    We formulate a complete theory of Edge Radiation based on a novel method relying on Fourier Optics techniques. Similar types of radiation like Transition UndulatorRadiation are addressed in the framework of the same formalism. Special attention is payed in discussing the validity of approximations upon which the theory is built. Our study makes consistent use of both similarity techniques and comparisons with numerical results from simulation. We discuss both near and far zone. Physical understanding of many asymptotes is discussed. Based on the solution of the field equation with a tensor Green's function technique, we also discuss an analytical model to describe the presence of a vacuum chamber. In particular, explicit calculations for a circular vacuum chamber are reported. Finally, we consider the use of Edge Radiation as a tool for electron beam diagnostics. We discuss Coherent Edge Radiation, Extraction of Edge Radiation by a mirror, and other issues becoming important at high electron energy and long radiation wavelength. Based on this work we also study the impact of Edge Radiation on XFEL setups and we discuss recent results. (orig.)

  6. Barriers and enabling factors for work-site physical activity programs: a qualitative examination.

    Science.gov (United States)

    Fletcher, Gena M; Behrens, Timothyh K; Domina, Lorie

    2008-05-01

    Work sites offer a productive setting for physical activity (PA) promoting interventions. Still, PA participation remains low. Thus, the purpose of this study was to examine the reasoning behind commonly reported barriers and enabling factors to participation in PA programs in a work-site setting. Employees from a large city government were recruited to participate in focus groups, stratified by white- and blue-collar occupations. Responses from open-ended questions about factors influencing participation in PA programs were audio recorded and transcribed verbatim. Resulting data were analyzed with open and axial coding. The sample consisted of 60 employees composing 9 focus groups. Although time was the most common barrier between both groups, white-collars workers responded that scheduling and work conflicts were the most common barrier concerning time. Blue-collar workers indicated shift work as their most common barrier. In addition, health was a significant enabling factor for both occupational categories. White-collar workers were much more concerned with appearances and were more highly motivated by weight loss and the hopefulness of quick results than were blue-collar workers. These findings are important in the understanding of PA as it relates to the reasoning behind participation in work-site programs in regard to occupational status.

  7. The integration of studio cycling into a worksite stress management programme.

    Science.gov (United States)

    Clark, Matthew M; Soyring, Jason E; Jenkins, Sarah M; Daniels, Denise C; Berkland, Bridget E; Werneburg, Brooke L; Hagen, Philip T; Lopez-Jimenez, Francisco; Warren, Beth A; Olsen, Kerry D

    2014-04-01

    High stress is a prevalent problem in the worksite. To reduce stress, improve productivity, reduce absenteeism, and lower healthcare costs, many companies offer exercise classes or stress management programmes. Although physical activity is an important component of stress management, few worksites have integrated physical activity into their comprehensive stress reduction programmes. The purpose of this single-arm pilot project was to examine the potential effectiveness of an integrated exercise (studio cycling) and cognitive-behavioural stress management programme. Eighty-four adults, 75% female, mostly aged 40+ years, participated in an integrated 12-week cycling studio and cognitive-behavioural stress management programme. Participants experienced a significant and clinically meaningful reduction on the Perceived Stress Scale (p manage stress at the programme's end and at a 1-month follow-up. Participants also reported having significantly improved overall health, improved nutritional habits, higher physical activity level, greater confidence in their ability to follow a healthy diet, higher spiritual well-being, improved sleep, receiving more support for maintaining healthy living and improved quality of life at the completion of the 12-week programme and 1-month follow-up. These findings provide further support for an integrated exercise and stress management programme. © 2013 John Wiley & Sons, Ltd.

  8. A work-site weight control program using financial incentives collected through payroll deduction.

    Science.gov (United States)

    Forster, J L; Jeffery, R W; Sullivan, S; Snell, M K

    1985-11-01

    In a work-site weight control program using a self-motivational program of financial incentives implemented through payroll deduction, 131 university employees chose weight loss goals (0 to 60 lb) and incentives (+5 to +30) to be deducted from each paycheck for six months. Return of incentive money was contingent on progress toward weight goals. Participants were assigned randomly to one of four protocols, involving group educational sessions v self-instruction only and required v optional attendance at weigh-ins and sessions. Overall, dropout rates (21.4%) and mean weight loss (12.2 lb) were encouraging, especially compared with those of other work-site programs. Weight loss was positively associated with attendance at weigh-ins and educational sessions. However, requiring attendance did not increase program effectiveness and seemed also to discourage enrollment among men. The weight control program was equally effective when offered with professionally led educational sessions or when accompanied by self-instructional materials only.

  9. Impact of a supervised worksite exercise program on back and core muscular endurance in firefighters.

    Science.gov (United States)

    Mayer, John M; Quillen, William S; Verna, Joe L; Chen, Ren; Lunseth, Paul; Dagenais, Simon

    2015-01-01

    Low back pain is a leading cause of disability in firefighters and is related to poor muscular endurance. This study examined the impact of supervised worksite exercise on back and core muscular endurance in firefighters. A cluster randomized controlled trial was used for this study. The study occurred in fire stations of a municipal fire department (Tampa, Florida). Subjects were 96 full-duty career firefighters who were randomly assigned by fire station to exercise (n = 54) or control (n = 42) groups. Exercise group participants completed a supervised exercise targeting the back and core muscles while on duty, two times per week for 24 weeks, in addition to their usual fitness regimen. Control group participants continued their usual fitness regimen. Back and core muscular endurance was assessed with the Biering-Sorensen test and plank test, respectively. Changes in back and core muscular endurance from baseline to 24 weeks were compared between groups using analysis of covariance and linear mixed effects models. After 24 weeks, the exercise group had 12% greater (p = .021) back muscular endurance and 21% greater (p = .0006) core muscular endurance than did the control group. The exercise intervention did not disrupt operations or job performance. A supervised worksite exercise program was safe and effective in improving back and core muscular endurance in firefighters, which could protect against future low back pain.

  10. High Speed Edge Detection

    Science.gov (United States)

    Prokop, Norman F (Inventor)

    2016-01-01

    Analog circuits for detecting edges in pixel arrays are disclosed. A comparator may be configured to receive an all pass signal and a low pass signal for a pixel intensity in an array of pixels. A latch may be configured to receive a counter signal and a latching signal from the comparator. The comparator may be configured to send the latching signal to the latch when the all pass signal is below the low pass signal minus an offset. The latch may be configured to hold a last negative edge location when the latching signal is received from the comparator.

  11. The influence of worksite and employee variables on employee engagement in telephonic health coaching programs: a retrospective multivariate analysis.

    Science.gov (United States)

    Grossmeier, Jessica

    2013-01-01

    This study assessed 11 determinants of health coaching program participation. A cross-sectional study design used secondary data to assess the role of six employee-level and five worksite-level variables on telephone-based coaching enrollment, active participation, and completion. Data was provided by a national provider of worksite health promotion program services for employers. A random sample of 34,291 employees from 52 companies was selected for inclusion in the study. Survey-based measures included age, gender, job type, health risk status, tobacco risk, social support, financial incentives, comprehensive communications, senior leadership support, cultural support, and comprehensive program design. Gender-stratified multivariate logistic regression models were applied using backwards elimination procedures to yield parsimonious prediction models for each of the dependent variables. Employees were more likely to enroll in coaching programs if they were older, female, and in poorer health, and if they were at worksites with fewer environmental supports for health, clear financial incentives for participation in coaching, more comprehensive communications, and more comprehensive programs. Once employees were enrolled, program completion was greater among those who were older, did not use tobacco, worked at a company with strong communications, and had fewer environmental supports for health. Both worksite-level and employee-level factors have significant influences on health coaching engagement, and there are gender differences in the strength of these predictors.

  12. A nutrition labeling intervention in worksite cafeterias : an implementation evaluation across two large catering companies in the Netherlands

    NARCIS (Netherlands)

    Vyth, Ellis L; Van Der Meer, Esther W C; Seidell, Jacob C; Steenhuis, Ingrid H M

    2012-01-01

    By both increasing the availability of healthy foods and labeling these products with the Choices logo, caterers may facilitate employees to make a healthier choice in their worksite cafeterias. The aim of this study was to explore which attributes influence the implementation of the Choices logo in

  13. Effectiveness of a worksite lifestyle intervention on vitality, work engagement, productivity, and sick leave: results of a randomized controlled trial

    NARCIS (Netherlands)

    Strijk, J.E.; Proper, K.I.; van Mechelen, W.; van der Beek, A.J.

    2013-01-01

    Objective A worksite lifestyle intervention aiming to improve lifestyle behaviors could be an effective tool to keep older workers vital, and thereby prolong their labor participation. This study evaluates the effectiveness of such an intervention on vitality, work engagement, productivity and sick

  14. Effectiveness of a worksite lifestyle intervention on vitality, work engagement, productivity, and sick leave: Results of a randomized controlled trial

    NARCIS (Netherlands)

    Strijk, J.E.; Proper, K.I.; Mechelen, W. van; Beek, A.J. van der

    2013-01-01

    Objective A worksite lifestyle intervention aiming to improve lifestyle behaviors could be an effective tool to keep older workers vital, and thereby prolong their labor participation. This study evaluates the effectiveness of such an intervention on vitality, work engagement, productivity and sick

  15. Effects of a Municipal Government's Worksite Exercise Program on Employee Absenteeism, Health Care Costs, and Variables Associated with Participation.

    Science.gov (United States)

    Pruett, Angela W.; Howze, Elizabeth H.

    The Blacksburg (Virginia) municipal government's worksite exercise program, developed in response to rising health insurance premiums, was evaluated to determine its effect on health care costs and employee absenteeism. Thirty-two employees who participated in the program for 4.5 years were compared to 32 nonparticipating employees. The program…

  16. Does Successful Weight Loss in an Internet-Based Worksite Weight Loss Program Improve Employee Presenteeism and Absenteeism?

    Science.gov (United States)

    Harden, Samantha M.; You, Wen; Almeida, Fabio A.; Hill, Jennie L.; Linnan, Laura A.; Allen, Kacie C.; Estabrooks, Paul A.

    2015-01-01

    Certain risk factors associated with overweight and obesity may lead to reduced productivity in the workforce (i.e., increased absenteeism and presenteeism). Participants in a large, Internet-based worksite weight loss intervention, who were present at follow-up (N = 1,030), completed a self-reported productivity measure (World Health…

  17. Effects of a Worksite Weight-Control Programme in Obese Male Workers: A Randomized Controlled Crossover Trial

    Science.gov (United States)

    Iriyama, Yae; Murayama, Nobuko

    2014-01-01

    Objective: We conducted a randomized controlled crossover trial to evaluate the effects of a new worksite weight-control programme designed for men with or at risk of obesity using a combination of nutrition education and nutrition environmental interventions. Subjects and methods: Male workers with or at risk of obesity were recruited for this…

  18. A systematic review of the cost-effectiveness of worksite physical activity and/or nutrition programs

    NARCIS (Netherlands)

    Dongen, J.M. van; Proper, K.I.; Wier, M.F. van; Beek, A.J. van der; Bongers, P.M.; Mechelen, W. van; Tulder, M.W. van

    2012-01-01

    Objective The aim of this study was to appraise and summarize the evidence on the cost-effectiveness of worksite physical activity and/or nutrition programs. Methods We searched EMBASE, MEDLINE, SportDiscus, PsycInfo, NIOSHTIC-2, NHSEED, HTA, and Econlit for studies published up to 14 January 2011.

  19. The Obesogenic Environment of Commercial Trucking: A Worksite Environmental Audit and Implications for Systems-Based Interventions

    Science.gov (United States)

    Apostolopoulos, Yorghos; Lemke, Michael; Sönmez, Sevil; Hege, Adam

    2016-01-01

    Background: Commercial trucker health is a vital public health concern. Enhanced understanding of the multiplicity, diversity, interdependence, and complexity of policies, resources, and stakeholders relevant to healthful living in trucking worksites can guide future interventions. Purpose: This article examines how the environmental attributes of…

  20. Long-Term Cost-Effectiveness and Return-on-Investment of a Mindfulness-Based Worksite Intervention

    NARCIS (Netherlands)

    Dongen, J.M. van; Berkel, J. van; Boot, C.R.L.; Bosmans, J.E.; Proper, K.I.; Bongers, P.M.; Beek, A.J. van der; Tulder, M.W. van; Wier, M.F. van

    2016-01-01

    Objectives: The aim of this study was to conduct a cost-effectiveness and return-on-investment analysis comparing a mindfulness-based worksite intervention to usual practice. Methods: Two hundred fifty-seven governmental research institute employees were randomized to the intervention or control

  1. Worksite Food and Physical Activity Environments and Wellness Supports Reported by Employed Adults in the United States, 2013.

    Science.gov (United States)

    Onufrak, Stephen J; Watson, Kathleen B; Kimmons, Joel; Pan, Liping; Khan, Laura Kettel; Lee-Kwan, Seung Hee; Park, Sohyun

    2018-01-01

    To examine the workplace food and physical activity (PA) environments and wellness culture reported by employed United States adults, overall and by employer size. Cross-sectional study using web-based survey on wellness policies and environmental supports for healthy eating and PA. Worksites in the United States. A total of 2101 adults employed outside the home. Survey items were based on the Centers for Disease Control and Prevention Worksite Health ScoreCard and Checklist of Health Promotion Environments and included the availability and promotion of healthy food items, nutrition education, promotion of breast-feeding, availability of PA amenities and programs, facility discounts, time for PA, stairwell signage, health promotion programs, and health risk assessments. Descriptive statistics were used to examine the prevalence of worksite environmental and facility supports by employer size (<100 or ≥100 employees). Chi-square tests were used to examine the differences by employer size. Among employed respondents with workplace food or drink vending machines, approximately 35% indicated the availability of healthy items. Regarding PA, 30.9% of respondents reported that their employer provided opportunities to be physically active and 17.6% reported worksite exercise facilities. Wellness programs were reported by 53.2% working for large employers, compared to 18.1% for smaller employers. Employee reports suggested that workplace supports for healthy eating, PA, and wellness were limited and were less common among smaller employers.

  2. Support for Food and Beverage Worksite Wellness Strategies and Sugar-Sweetened Beverage Intake Among Employed U.S. Adults.

    Science.gov (United States)

    Lee-Kwan, Seung Hee; Pan, Liping; Kimmons, Joel; Foltz, Jennifer; Park, Sohyun

    2017-03-01

    Sugar-sweetened beverage (SSB) consumption is high among U.S. adults and is associated with obesity. Given that more than 100 million Americans consume food or beverages at work daily, the worksite may be a venue for interventions to reduce SSB consumption. However, the level of support for these interventions is unknown. We examined associations between workday SSB intake and employees' support for worksite wellness strategies (WWSs). We conducted a cross-sectional study using data from Web-based annual surveys that gather information on health-related attitudes and behaviors. Study setting was the United States. A total of 1924 employed adults (≥18 years) selected using probability-based sampling. The self-reported independent variable was workday SSB intake (0, food/drink, (3) available healthy options, and (4) less available SSB. Multivariable logistic regression was used to control for sociodemographic variables, employee size, and availability of cafeteria/vending machine. About half of employees supported accessible free water (54%), affordable healthy food/drink (49%), and available healthy options (46%), but only 28% supported less available SSB. Compared with non-SSB consumers, daily SSB consumers were significantly less supportive of accessible free water (adjusted odds ratio, .67; p < .05) or less available SSB (odds ratio, .49; p < .05). Almost half of employees supported increasing healthy options within worksites, although daily workday SSB consumers were less supportive of certain strategies. Lack of support could be a potential barrier to the successful implementation of certain worksite interventions.

  3. The Inner Urban Edge

    Science.gov (United States)

    Ferebee, Ann; Carpenter, Edward K.

    1974-01-01

    In this article, renewal of the inner urban edge is discussed. Norfolk (Virginia) is attempting to blur the difference between old and new neighbor hoods through zoning and architectural controls. Cincinnati (Ohio) is developing an environmentally sound hillside design. Reading (Pennsylvania) is utilizing old railyards for greenbelts of hiking and…

  4. Swords with Blunt Edges

    Science.gov (United States)

    Popham, W. James

    2004-01-01

    Many U.S. educators now wonder whether they're teachers or targets. This mentality stems from the specter of their school being sanctioned for failing the state accountability tests mandated under No Child Left Behind (NCLB). According to this author, most of those tests are like blunt-edged swords: They function badly in two directions. While…

  5. Cost of talking parents, healthy teens: a worksite-based intervention to promote parent-adolescent sexual health communication.

    Science.gov (United States)

    Ladapo, Joseph A; Elliott, Marc N; Bogart, Laura M; Kanouse, David E; Vestal, Katherine D; Klein, David J; Ratner, Jessica A; Schuster, Mark A

    2013-11-01

    To examine the cost and cost-effectiveness of implementing Talking Parents, Healthy Teens, a worksite-based parenting program designed to help parents address sexual health with their adolescent children. We enrolled 535 parents with adolescent children at 13 worksites in southern California in a randomized trial. We used time and wage data from employees involved in implementing the program to estimate fixed and variable costs. We determined cost-effectiveness with nonparametric bootstrap analysis. For the intervention, parents participated in eight weekly 1-hour teaching sessions at lunchtime. The program included games, discussions, role plays, and videotaped role plays to help parents learn to communicate with their children about sex-related topics, teach their children assertiveness and decision-making skills, and supervise and interact with their children more effectively. Implementing the program cost $543.03 (standard deviation, $289.98) per worksite in fixed costs, and $28.05 per parent (standard deviation, $4.08) in variable costs. At 9 months, this $28.05 investment per parent yielded improvements in number of sexual health topics discussed, condom teaching, and communication quality and openness. The cost-effectiveness was $7.42 per new topic discussed using parental responses and $9.18 using adolescent responses. Other efficacy outcomes also yielded favorable cost-effectiveness ratios. Talking Parents, Healthy Teens demonstrated the feasibility and cost-effectiveness of a worksite-based parenting program to promote parent-adolescent communication about sexual health. Its cost is reasonable and is unlikely to be a significant barrier to adoption and diffusion for most worksites considering its implementation. Copyright © 2013 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  6. Prevention of Weight Gain Following a Worksite Nutrition and Exercise Program

    Science.gov (United States)

    Thorndike, Anne N.; Sonnenberg, Lillian; Healey, Erica; Myint-U, Khinlei; Kvedar, Joseph C.; Regan, Susan

    2012-01-01

    Background Many employers are now providing wellness programs to help employees make changes in diet and exercise behaviors. Improving health outcomes and reducing costs will depend on whether employees sustain lifestyle changes and maintain a healthy weight over time. Purpose To determine if a 9-month maintenance intervention immediately following a 10-week worksite exercise and nutrition program would prevent regain of the weight lost during the program. Design RCT. Setting/participants In 2008, a total of 330 employees from 24 teams completed a 10-week exercise and nutrition program at a large hospital worksite and were randomized by team to maintenance or control (usual care) for 9 months. Intervention Internet support with a website for goal-setting and self-monitoring of weight and exercise plus minimal personal support. Main outcome measures Weight loss, percentage weight loss, time spent in physical activity, and frequency of consumption of fruits/vegetables, fatty foods, and sugary foods at 1 year compared to baseline. One-year follow-up was completed in 2010, and data were analyzed in 2011. Results At 1 year, 238 subjects (72%) completed follow-up assessments. Mean baseline BMI was 27.6 and did not differ between intervention and control. Compared to baseline, both groups lost weight during the 10-week program and maintained 65% of weight loss at 1 year (p<0.001). There was no difference in weight loss between groups at end of the 10-week program (4.8 lbs vs 4.3 lbs, p=0.53 for group×time interaction) or end of maintenance at 1 year (3.4 lbs vs 2.5 lbs, p=0.40 for group×time interaction). All subjects had improvements in physical activity and nutrition (increased fruits/vegetables and decreased fat and sugar intake) at 1 year but did not differ by group. Conclusions An intensive 10-week team-based worksite exercise and nutrition program resulted in moderate weight loss and improvements in diet and exercise behaviors at 1 year, but an Internet

  7. ICRF edge modeling

    International Nuclear Information System (INIS)

    1991-01-01

    This report describes the technical progress for the DOE sponsored grant, ''ICRF Edge Modeling.'' An emphasis is placed on the progress since the Technical Progress Report (January 10, 1990) was submitted to the Department of Energy. The design of ICRF antennas for C-Mod and TFTR was investigated during this period. In addition, quasilinear models for electron heating were refined and applied to the design of ICRF antennas. The relevant professional activities sponsored by this grant are given. 4 refs., 11 figs

  8. ICRF edge modeling studies

    Energy Technology Data Exchange (ETDEWEB)

    Lehrman, I.S. (Grumman Corp. Research Center, Princeton, NJ (USA)); Colestock, P.L. (Princeton Univ., NJ (USA). Plasma Physics Lab.)

    1990-04-01

    Theoretical models have been developed, and are currently being refined, to explain the edge plasma-antenna interaction that occurs during ICRF heating. The periodic structure of a Faraday shielded antenna is found to result in strong ponderomotive force in the vicinity of the antenna. A fluid model, which incorporates the ponderomotive force, shows an increase in transport to the Faraday shield. A kinetic model shows that the strong antenna near fields act to increase the energy of deuterons which strike the shield, thereby increasing the sputtering of shield material. Estimates of edge impurity harmonic heating show no significant heating for either in or out-of-phase antenna operation. Additionally, a particle model for electrons near the shield shows that heating results from the parallel electric field associated with the fast wave. A quasilinear model for edge electron heating is presented and compared to the particle calculations. The models' predictions are shown to be consistent with measurements of enhanced transport. (orig.).

  9. A worksite vitality intervention for older hospital workers to improve vitality work engegement, productivity ans sick leave: results of a randomized controlled trial

    NARCIS (Netherlands)

    Strijk, J.E.; Proper, K.I.; Meschelen, W. van; Beek, A. van der

    2012-01-01

    Objectives A worksite vitality intervention aiming to improve lifestyle behaviors could be an effective tool to keep older workers vital, and thereby prolong their labor participation. Therefore, this study evaluates the effectiveness of such an intervention on vitality, work engagement,

  10. Process evaluation of two environmental nutrition programmes and an educational nutrition programme conducted at supermarkets and worksite cafeterias in the Netherlands

    NARCIS (Netherlands)

    I.H.M. Steenhuis; P. van Assema (Patricia); A. Reubsaet; G.J. Kok (Gerjo)

    2004-01-01

    textabstractThis article describes the process evaluation of two environmental programs and a educational nutrition program, implemented at supermarkets and worksite cafeterias. Studies conducted earlier, indicated that the programs had no effect on consumers’ eating behavior. Consequently, the more

  11. Behavioral and Cognitive Effects of a Worksite-Based Weight Gain Prevention Program: The NHF-NRG In Balance-Project

    NARCIS (Netherlands)

    Kwak, L.; Kremers, S.P.J.; Visscher, T.L.S.; Baak, van M.A.; Brug, J.

    2009-01-01

    OBJECTIVE:: Examine the effectiveness of the worksite-based weight gain prevention program Netherlands Heart Foundation-Netherlands Research program weight Gain prevention In Balance, with regard to behavioral changes and corresponding cognitive determinants. METHODS:: A nonrandomized

  12. New approach in the evaluation of a fitness program at a worksite.

    Science.gov (United States)

    Shirasaya, K; Miyakawa, M; Yoshida, K; Tanaka, C; Shimada, N; Kondo, T

    1999-03-01

    The most common methods for the economic evaluation of a fitness program at a worksite are cost-effectiveness, cost-benefit, and cost-utility analyses. In this study, we applied a basic microeconomic theory, "neoclassical firm's problems," as the new approach for it. The optimal number of physical-exercise classes that constitute the core of the fitness program are determined using the cubic health production function. The optimal number is defined as the number that maximizes the profit of the program. The optimal number corresponding to any willingness-to-pay amount of the participants for the effectiveness of the program is presented using a graph. For example, if the willingness-to-pay is $800, the optimal number of classes is 23. Our method can be applied to the evaluation of any health care program if the health production function can be estimated.

  13. Guidance to employers on integrating e-cigarettes/electronic nicotine delivery systems into tobacco worksite policy.

    Science.gov (United States)

    Whitsel, Laurie P; Benowitz, Neal; Bhatnagar, Aruni; Bullen, Chris; Goldstein, Fred; Matthias-Gray, Lena; Grossmeier, Jessica; Harris, John; Isaac, Fikry; Loeppke, Ron; Manley, Marc; Moseley, Karen; Niemiec, Ted; OʼBrien, Vince; Palma-Davis, LaVaughn; Pronk, Nico; Pshock, Jim; Stave, Gregg M; Terry, Paul

    2015-03-01

    In recent years, new products have entered the marketplace that complicate decisions about tobacco control policies and prevention in the workplace. These products, called electronic cigarettes (e-cigarettes) or electronic nicotine delivery systems, most often deliver nicotine as an aerosol for inhalation, without combustion of tobacco. This new mode of nicotine delivery raises several questions about the safety of the product for the user, the effects of secondhand exposure, how the public use of these products should be handled within tobacco-free and smoke-free air policies, and how their use affects tobacco cessation programs, wellness incentives, and other initiatives to prevent and control tobacco use. In this article, we provide a background on e-cigarettes and then outline key policy recommendations for employers on how the use of these new devices should be managed within worksite tobacco prevention programs and control policies.

  14. Effects of a worksite physical activity intervention for hospital nurses who are working mothers.

    Science.gov (United States)

    Tucker, Sharon J; Lanningham-Foster, Lorraine M; Murphy, Justyne N; Thompson, Warren G; Weymiller, Audrey J; Lohse, Christine; Levine, James A

    2011-09-01

    Hospital nurses who are working mothers are challenged to maintain their personal health and model healthy behaviors for their children. This study aimed to develop and test an innovative 10-week worksite physical activity intervention integrated into the work flow of hospital-based nurses who were mothers. Three volunteer adult medical-surgical nursing units participated as intervention units. Fifty-eight nurses (30 intervention and 28 control) provided baseline and post-intervention repeated measurements of physical activity (steps) and body composition. Intervention participants provided post-intervention focus group feedback. For both groups, daily steps averaged more than 12,400 at baseline and post-intervention. No significant effects were found for physical activity; significant effects were found for fat mass, fat index, and percent fat (p working mothers. Future research is warranted with a larger sample, longer intervention, and additional measures. Copyright 2011, SLACK Incorporated.

  15. Implementation of a worksite educational program focused on promoting healthy eating habits.

    Science.gov (United States)

    Tanagra, Dimitra; Panidis, Dimitris; Tountas, Yannis; Remoudaki, Elina; Alexopoulos, Evangelos C

    2013-01-01

    To estimate the effectiveness of a short-term educational-counseling worksite program focused on lipid intake, by monitoring the possible change on nutrition knowledge and eating habits. an 8-week educational program based on the Health Belief Model was implemented in a honey packaging and sales company in Greece. 20 out of the 29 employees initially enrolled completed the program. Knowledge level and eating habits were evaluated prior and after the intervention by the "Nutrition Knowledge Questionnaire" and the "Food Habits Questionnaire". ANOVA, Spearman rho test and paired Wilcoxon test were employed in statistical analysis. Non smokers and those with higher educational level had healthier eating habits. Knowledge following the intervention was significantly improved concerning recommendations and basic food ingredients but as far as eating habits were concerned, scores were not improved significantly, while intake of fried food was increased. Short-term interventions may produce substantial improvement in knowledge but not necessarily modifications in unhealthy eating habits.

  16. Cardiorespiratory fitness, cardiovascular workload and risk factors among cleaners; a cluster randomized worksite intervention

    DEFF Research Database (Denmark)

    Korshøj, Mette; Krustrup, Peter; Jørgensen, Marie Birk

    2012-01-01

    . The clusters will be balanced on the following criteria: Geographical work location, gender, age and seniority. Cleaners are randomized to either I) a reference group, receiving lectures concerning healthy living, or II) an intervention group, performing worksite aerobic exercise. Data collection......ABSTRACT: BACKGROUND: Prevalence of cardiovascular risk factors is unevenly distributed among occupational groups. The working environment, as well as lifestyle and socioeconomic status contribute to the disparity and variation in prevalence of these risk factors. High physical work demands have...... been shown to increase the risk for cardiovascular disease and mortality, contrary to leisure time physical activity. High physical work demands in combination with a low cardiorespiratory fitness infer a high relative workload and an excessive risk for cardiovascular mortality. Therefore, the aim...

  17. Effects of worksite health interventions involving reduced work hours and physical exercise on sickness absence costs.

    Science.gov (United States)

    von Thiele Schwarz, Ulrica; Hasson, Henna

    2012-05-01

    To investigate the effects of physical exercise during work hours (PE) and reduced work hours (RWH) on direct and indirect costs associated with sickness absence (SA). Sickness absence and related costs at six workplaces, matched and randomized to three conditions (PE, RWH, and referents), were retrieved from company records and/or estimated using salary conversion methods or value-added equations on the basis of interview data. Although SA days decreased in all conditions (PE, 11.4%; RWH, 4.9%; referents, 15.9%), costs were reduced in the PE (22.2%) and RWH (4.9%) conditions but not among referents (10.2% increase). Worksite health interventions may generate savings in SA costs. Costs may not be linear to changes in SA days. Combing the friction method with indirect cost estimates on the basis of value-added productivity may help illuminate both direct and indirect SA costs.

  18. Smoothness in Binomial Edge Ideals

    Directory of Open Access Journals (Sweden)

    Hamid Damadi

    2016-06-01

    Full Text Available In this paper we study some geometric properties of the algebraic set associated to the binomial edge ideal of a graph. We study the singularity and smoothness of the algebraic set associated to the binomial edge ideal of a graph. Some of these algebraic sets are irreducible and some of them are reducible. If every irreducible component of the algebraic set is smooth we call the graph an edge smooth graph, otherwise it is called an edge singular graph. We show that complete graphs are edge smooth and introduce two conditions such that the graph G is edge singular if and only if it satisfies these conditions. Then, it is shown that cycles and most of trees are edge singular. In addition, it is proved that complete bipartite graphs are edge smooth.

  19. Competing edge networks

    Science.gov (United States)

    Parsons, Mark; Grindrod, Peter

    2012-06-01

    We introduce a model for a pair of nonlinear evolving networks, defined over a common set of vertices, subject to edgewise competition. Each network may grow new edges spontaneously or through triad closure. Both networks inhibit the other's growth and encourage the other's demise. These nonlinear stochastic competition equations yield to a mean field analysis resulting in a nonlinear deterministic system. There may be multiple equilibria; and bifurcations of different types are shown to occur within a reduced parameter space. This situation models competitive communication networks such as BlackBerry Messenger displacing SMS; or instant messaging displacing emails.

  20. Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

    Science.gov (United States)

    Nenonen, Sanna; Vasara, Juha

    2013-01-01

    Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

  1. Improving the diet of employees at blue-collar worksites: results from the "Food at work" intervention study

    DEFF Research Database (Denmark)

    Lassen, Anne Dahl; Thorsen, Anne Vibeke; Sommer, Helle Mølgaard

    2011-01-01

    Objective. To examine the impact of a 6-month participatory and empowerment-based intervention study on employees' dietary habits and on changes in the canteen nutrition environment. Design. Worksites were stratified by company type and by the presence or absence of an in-house canteen......) changes in employees' dietary habits derived from 4 d pre-coded food diaries of a group of employees at the worksites (paired-data structure); and (ii) the canteen nutrition environment as identified by aggregating chemical nutritional analysis of individual canteen lunches (different participants.......002) and cake and sweets (—18 g/10 MJ, P = 0.002) and a median increase in intake of dietary fibre (3 g/10 MJ, P nutrition environment, a significant reduction in the percentage of energy obtained from fat was found...

  2. Does Successful Weight Loss in an Internet-Based Worksite Weight Loss Program Improve Employee Presenteeism and Absenteeism?

    Science.gov (United States)

    Harden, Samantha M.; You, Wen; Almeida, Fabio A.; Hill, Jennie L.; Linnan, Laura A.; Allen, Kacie C.; Estabrooks, Paul A.

    2017-01-01

    Certain risk factors associated with overweight and obesity may lead to reduced productivity in the workforce (i.e., increased absenteeism and presenteeism). Participants in a large, Internet-based worksite weight loss intervention, who were present at follow-up (N = 1,030), completed a self-reported productivity measure (World Health Organization’s Health and Work Performance Questionnaire) at baseline and postintervention. Twenty-two percent of the participants lost a clinically meaningful amount of weight (≥5% weight loss). There were no statistically significant (p absenteeism or for absolute or relative presenteeism. Within a modestly successful Internet-based, worksite weight loss intervention, weight loss did not improve self-reported absenteeism or presenteeism. Further studies are needed to explore the sensitivity of the World Health Organization’s Health and Work Performance Questionnaire and the long-term effects of weight loss on productivity. PMID:25842385

  3. Does Successful Weight Loss in an Internet-Based Worksite Weight Loss Program Improve Employee Presenteeism and Absenteeism?

    Science.gov (United States)

    Harden, Samantha M; You, Wen; Almeida, Fabio A; Hill, Jennie L; Linnan, Laura A; Allen, Kacie C; Estabrooks, Paul A

    2015-12-01

    Certain risk factors associated with overweight and obesity may lead to reduced productivity in the workforce (i.e., increased absenteeism and presenteeism). Participants in a large, Internet-based worksite weight loss intervention, who were present at follow-up (N = 1,030), completed a self-reported productivity measure (World Health Organization's Health and Work Performance Questionnaire) at baseline and postintervention. Twenty-two percent of the participants lost a clinically meaningful amount of weight (≥5% weight loss). There were no statistically significant (p absenteeism or for absolute or relative presenteeism. Within a modestly successful Internet-based, worksite weight loss intervention, weight loss did not improve self-reported absenteeism or presenteeism. Further studies are needed to explore the sensitivity of the World Health Organization's Health and Work Performance Questionnaire and the long-term effects of weight loss on productivity. © 2015 Society for Public Health Education.

  4. Degenerate band edge laser

    Science.gov (United States)

    Veysi, Mehdi; Othman, Mohamed A. K.; Figotin, Alexander; Capolino, Filippo

    2018-05-01

    We propose a class of lasers based on a fourth-order exceptional point of degeneracy (EPD) referred to as the degenerate band edge (DBE). EPDs have been found in parity-time-symmetric photonic structures that require loss and/or gain; here we show that the DBE is a different kind of EPD since it occurs in periodic structures that are lossless and gainless. Because of this property, a small level of gain is sufficient to induce single-frequency lasing based on a synchronous operation of four degenerate Floquet-Bloch eigenwaves. This lasing scheme constitutes a light-matter interaction mechanism that leads also to a unique scaling law of the laser threshold with the inverse of the fifth power of the laser-cavity length. The DBE laser has the lowest lasing threshold in comparison to a regular band edge laser and to a conventional laser in cavities with the same loaded quality (Q ) factor and length. In particular, even without mirror reflectors the DBE laser exhibits a lasing threshold which is an order of magnitude lower than that of a uniform cavity laser of the same length and with very high mirror reflectivity. Importantly, this novel DBE lasing regime enforces mode selectivity and coherent single-frequency operation even for pumping rates well beyond the lasing threshold, in contrast to the multifrequency nature of conventional uniform cavity lasers.

  5. A nutrition labeling intervention in worksite cafeterias: an implementation evaluation across two large catering companies in the Netherlands.

    Science.gov (United States)

    Vyth, Ellis L; Van Der Meer, Esther W C; Seidell, Jacob C; Steenhuis, Ingrid H M

    2012-06-01

    By both increasing the availability of healthy foods and labeling these products with the Choices logo, caterers may facilitate employees to make a healthier choice in their worksite cafeterias. The aim of this study was to explore which attributes influence the implementation of the Choices logo in worksite cafeterias in the Netherlands. Questionnaires were completed by catering managers of 316 cafeterias of two large caterers in the Netherlands (response rate 49.8%). Attributes from the Diffusion of Innovations Theory were used to investigate whether they could predict implementation. Compatibility (consistency with the beliefs of the catering manager; OR = 1.52), voluntariness (perception of the implementation as voluntary; OR = 0.50), result demonstrability (ability to communicate the implementation; OR = 1.52) and complexity in the sense of time (time needed for implementation; OR = 0.70) were the best predictors for the frequency of offering fresh Choices products (all significant). For the frequency of using Choices promotion material, voluntariness (OR = 0.54), result demonstrability (OR = 1.51) and relative advantage (perceived advantage of the implementation; OR = 1.44) were the best predictors (all significant). In conclusion, this study provides unique insights into which perceived attributes influence the implementation of a nutrition logo in worksite cafeterias. To increase the implementation, the Choices logo should be consistent with catering managers' ideas about healthy food, the workload of implementing the logo should be limited and it could be recommended to incorporate the logo in the health policy of the caterer.

  6. The effectiveness of worksite nutrition and physical activity interventions for controlling employee overweight and obesity: a systematic review.

    Science.gov (United States)

    Anderson, Laurie M; Quinn, Toby A; Glanz, Karen; Ramirez, Gilbert; Kahwati, Leila C; Johnson, Donna B; Buchanan, Leigh Ramsey; Archer, W Roodly; Chattopadhyay, Sajal; Kalra, Geetika P; Katz, David L

    2009-10-01

    This report presents the results of a systematic review of the effectiveness of worksite nutrition and physical activity programs to promote healthy weight among employees. These results form the basis for the recommendation by the Task Force on Community Preventive Services on the use of these interventions. Weight-related outcomes, including weight in pounds or kilograms, BMI, and percentage body fat were used to assess effectiveness of these programs. This review found that worksite nutrition and physical activity programs achieve modest improvements in employee weight status at the 6-12-month follow-up. A pooled effect estimate of -2.8 pounds (95% CI=-4.6, -1.0) was found based on nine RCTs, and a decrease in BMI of -0.5 (95% CI=-0.8, -0.2) was found based on six RCTs. The findings appear to be applicable to both male and female employees, across a range of worksite settings. Most of the studies combined informational and behavioral strategies to influence diet and physical activity; fewer studies modified the work environment (e.g., cafeteria, exercise facilities) to promote healthy choices. Information about other effects, barriers to implementation, cost and cost effectiveness of interventions, and research gaps are also presented in this article. The findings of this systematic review can help inform decisions of employers, planners, researchers, and other public health decision makers.

  7. A Worksite Health Education Workshop as Empowerment Intervention for Health Promotion in the National Research Centre of Egypt

    Directory of Open Access Journals (Sweden)

    Nagat Mohamed Amer

    2016-09-01

    Full Text Available AIM: The study aimed to assess worksite health education workshops as a successful tool for health promotion of employees. MATERIAL AND METHODS: A one day workshop was held for individuals engaged in research activities in the National research Centre of Egypt at the worksite. Its main objective was to highlight the nature, causes, symptoms and management of job stress. Participants were asked to fill a personality assessment sheet, a self-reported questionnaire for job satisfaction. Other questionnaires for assessment of falsification of type and some socio-demographic data were filled by the attendants. A concise survey was introduced at the end of the workshop for feedback collection. RESULTS: Attendants of the workshop were 36 subjects mainly females (94.4%. Mean age was 40.5 years with 63.9% of participants at their postdoctoral studies stage. Participants were at midway in the scale of job satisfaction (3.3 and did not suffer from falsification (0.3. The feedback survey score (11.5 showed great acceptance for the intervention. Special interest in the topic of stress was reported by 35.1% of attendants who found it the best item in the workshop and the interactive manipulation came next as declared by 18.9% of the participants. CONCLUSION: Worksite health education workshops seem to be a successful practice for empowerment in the Egyptian workplace.

  8. Cheating on the edge.

    Directory of Open Access Journals (Sweden)

    Lee Alan Dugatkin

    2008-07-01

    Full Text Available We present the results of an individual agent-based model of antibiotic resistance in bacteria. Our model examines antibiotic resistance when two strategies exist: "producers"--who secrete a substance that breaks down antibiotics--and nonproducers ("cheats" who do not secrete, or carry the machinery associated with secretion. The model allows for populations of up to 10,000, in which bacteria are affected by their nearest neighbors, and we assume cheaters die when there are no producers in their neighborhood. Each of 10,000 slots on our grid (a torus could be occupied by a producer or a nonproducer, or could (temporarily be unoccupied. The most surprising and dramatic result we uncovered is that when producers and nonproducers coexist at equilibrium, nonproducers are almost always found on the edges of clusters of producers.

  9. Challenges in edge modeling

    International Nuclear Information System (INIS)

    Schneider, R.

    2007-01-01

    Fluid models like B2, UEDGE or EDGE2D are the working horses for scrape-off layer physics, both for design and experimental support. The concept of a numerical tokamak, aiming at a predictive code for ITER, triggers the need to re-assess the available tools and their necessary extensions. These additional physics issues will be summarized from a personal point-of-view. Depending on the specific problem, several complexity levels of scrape-off layer models will be needed. Therefore, a hierarchy of tools is necessary, which will be discussed. Furthermore, the experience existing in other scientific fields with multi-scale problems and modeling should be used. Here, the coupling of different length and time scales are in particular of interest for fusion problems. (author)

  10. Edge remap for solids

    Energy Technology Data Exchange (ETDEWEB)

    Kamm, James R.; Love, Edward; Robinson, Allen C; Young, Joseph G.; Ridzal, Denis

    2013-12-01

    We review the edge element formulation for describing the kinematics of hyperelastic solids. This approach is used to frame the problem of remapping the inverse deformation gradient for Arbitrary Lagrangian-Eulerian (ALE) simulations of solid dynamics. For hyperelastic materials, the stress state is completely determined by the deformation gradient, so remapping this quantity effectively updates the stress state of the material. A method, inspired by the constrained transport remap in electromagnetics, is reviewed, according to which the zero-curl constraint on the inverse deformation gradient is implicitly satisfied. Open issues related to the accuracy of this approach are identified. An optimization-based approach is implemented to enforce positivity of the determinant of the deformation gradient. The efficacy of this approach is illustrated with numerical examples.

  11. Playing on the edge

    DEFF Research Database (Denmark)

    Cermak-Sassenrath, Daniel

    2018-01-01

    and specific ways. For instance, gambling for money, party and drinking games, professional play and show sports, art installations, violent and military propaganda computer games, pervasive/mobile gaming, live-action role playing, festivals, performances, and games such as Ghosting and Planking. It is argued......Everything gets more interesting, challenging, or intense the closer it gets to the edge, and so does play. How edgy can play become and still be play? Based on Huizinga’s notion of play, this chapter discusses how a wide range of playful activities pushes the boundaries of play in different...... that in concert with a number of characteristics that mark an activity as play, play is essentially a subjective perspective and individual decision of the player. Huizinga calls this attitude the play spirit, which informs a player’s actions and is in turn sustained by them. Edgy digital or mobile games do...

  12. Competing edge networks

    International Nuclear Information System (INIS)

    Parsons, Mark; Grindrod, Peter

    2012-01-01

    We introduce a model for a pair of nonlinear evolving networks, defined over a common set of vertices, subject to edgewise competition. Each network may grow new edges spontaneously or through triad closure. Both networks inhibit the other's growth and encourage the other's demise. These nonlinear stochastic competition equations yield to a mean field analysis resulting in a nonlinear deterministic system. There may be multiple equilibria; and bifurcations of different types are shown to occur within a reduced parameter space. This situation models competitive communication networks such as BlackBerry Messenger displacing SMS; or instant messaging displacing emails. -- Highlights: ► A model for edgewise-competing evolving network pairs is introduced. ► Defined competition equations yield to a mean field analysis. ► Multiple equilibrium states and different bifurcation types can occur. ► The system is sensitive to sparse initial conditions and near unstable equilibriums.

  13. Nudging and social marketing techniques encourage employees to make healthier food choices: a randomized controlled trial in 30 worksite cafeterias in The Netherlands.

    Science.gov (United States)

    Velema, Elizabeth; Vyth, Ellis L; Hoekstra, Trynke; Steenhuis, Ingrid H M

    2018-02-01

    Currently, many studies focus on how the environment can be changed to encourage healthier eating behavior, referred to as choice architecture or "nudging." However, to date, these strategies are not often investigated in real-life settings, such as worksite cafeterias, or are only done so on a short-term basis. The objective of this study is to examine the effects of a healthy worksite cafeteria ["worksite cafeteria 2.0" (WC 2.0)] intervention on Dutch employees' purchase behavior over a 12-wk period. We conducted a randomized controlled trial in 30 worksite cafeterias. Worksite cafeterias were randomized to either the intervention or control group. The intervention aimed to encourage employees to make healthier food choices during their daily worksite cafeteria visits. The intervention consisted of 14 simultaneously executed strategies based on nudging and social marketing theories, involving product, price, placement, and promotion. Adjusted multilevel models showed significant positive effects of the intervention on purchases for 3 of the 7 studied product groups: healthier sandwiches, healthier cheese as a sandwich filling, and the inclusion of fruit. The increased sales of these healthier meal options were constant throughout the 12-wk intervention period. This study shows that the way worksite cafeterias offer products affects purchase behavior. Situated nudging and social marketing-based strategies are effective in promoting healthier choices and aim to remain effective over time. Some product groups only indicated an upward trend in purchases. Such an intervention could ultimately help prevent and reduce obesity in the Dutch working population. This trial was registered at the Dutch Trial Register (http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=5372) as NTR5372.

  14. Does a grill menu redesign influence sales, nutrients purchased, and consumer acceptance in a worksite cafeteria?

    Science.gov (United States)

    Vadiveloo, Maya K; Malik, Vasanti S; Spiegelman, Donna; Willett, Walter C; Mattei, Josiemer

    2017-12-01

    Worksite cafeterias are compelling venues to improve diet quality through environmental changes. We conducted a pre-post study to evaluate how a cafeteria-initiated grill menu redesign influenced sales, revenue, and nutrient content of foods purchased. Secondly, we evaluated consumer opinions about menu changes to inform practices for worksite environment interventions. Monthly sales data (2012-2015) were used to compute gross sales and revenue of entrées and side dishes pre-post menu changes. Alternative protein sources replaced red meat; nutrient composition and nutrients purchased were compared using Food Pro software. Consumer responses were queried using online surveys; open-ended responses were analyzed using NVivo. Differences in sales and nutrient content pre-post menu redesign were tested with Wilcoxon Rank Sum tests. Gross sales of entrées (61 vs. 222 servings/month; p = 0.01) and side dishes (120 vs. 365 servings/month; p = 0.001) increased more than three-fold post-menu changes. Revenue from entrées (312 vs. 1144 USD/month; p = 0.01) and side dishes (238 vs. 914 USD/month; p = 0.001) also increased; per entrée, consumers purchased significantly more unsaturated fat (5 g), and less saturated fat (3 g) and sodium (100 mg). For side dishes, they purchased fewer calories (48 kcal) and unsaturated fat (2.9 g), but more fiber (1.8 g), and sodium (260 mg). Four themes emerged from consumer responses: the importance of 1) variety, novelty, choice; 2) cost, affordability, value; 3) health; and 4) food quality, taste. Menu redesign can improve nutrient content, while also increasing sales and revenue. Multi-dimensional assessment of the nutritional, consumer, and retailer implications is desirable practice for enacting similar environmental changes.

  15. Cutting Edge Localisation in an Edge Profile Milling Head

    NARCIS (Netherlands)

    Fernandez Robles, Laura; Azzopardi, George; Alegre, Enrique; Petkov, Nicolai

    2015-01-01

    Wear evaluation of cutting tools is a key issue for prolonging their lifetime and ensuring high quality of products. In this paper, we present a method for the effective localisation of cutting edges of inserts in digital images of an edge profile milling head. We introduce a new image data set of

  16. Performance Against WELCOA's Worksite Health Promotion Benchmarks Across Years Among Selected US Organizations.

    Science.gov (United States)

    Weaver, GracieLee M; Mendenhall, Brandon N; Hunnicutt, David; Picarella, Ryan; Leffelman, Brittanie; Perko, Michael; Bibeau, Daniel L

    2018-05-01

    The purpose of this study was to quantify the performance of organizations' worksite health promotion (WHP) activities against the benchmarking criteria included in the Well Workplace Checklist (WWC). The Wellness Council of America (WELCOA) developed a tool to assess WHP with its 100-item WWC, which represents WELCOA's 7 performance benchmarks. Workplaces. This study includes a convenience sample of organizations who completed the checklist from 2008 to 2015. The sample size was 4643 entries from US organizations. The WWC includes demographic questions, general questions about WHP programs, and scales to measure the performance against the WELCOA 7 benchmarks. Descriptive analyses of WWC items were completed separately for each year of the study period. The majority of the organizations represented each year were multisite, multishift, medium- to large-sized companies mostly in the services industry. Despite yearly changes in participating organizations, results across the WELCOA 7 benchmark scores were consistent year to year. Across all years, benchmarks that organizations performed the lowest were senior-level support, data collection, and programming; wellness teams and supportive environments were the highest scoring benchmarks. In an era marked with economic swings and health-care reform, it appears that organizations are staying consistent in their performance across these benchmarks. The WWC could be useful for organizations, practitioners, and researchers in assessing the quality of WHP programs.

  17. Cross-cultural adaptation of the CDC Worksite Health ScoreCard questionnaire into Portuguese

    Directory of Open Access Journals (Sweden)

    Patrícia Coelho de Soárez

    2016-06-01

    Full Text Available SUMMARY Objective: Despite the progress in the implementation of health promotion programs in the workplace, there are no questionnaires in Brazil to assess the scope of health promotion interventions adopted and their scientific basis. This study aimed to translate into Brazilian Portuguese and culturally adapt the CDC Worksite Health ScoreCard (HSC questionnaire. Method: The HSC has 100 questions grouped into twelve domains. The steps are as follows: translation, reconciliation, back-translation, review by expert panel, pretesting, and final revision. The convenience sample included 27 individuals from health insurance providers and companies of various sizes, types and industries in São Paulo. Data were analyzed using descriptive statistics. Results: The average age of the sample was 38 years, most of the subjects were female (21 of 27, and were responsible for programs to promote health in these workplaces. Most questions were above the minimum value of understanding set at 90%. The participants found the questionnaire very useful to determine the extent of existing health promotion programs and to pinpoint areas that could be developed. Conclusion: The Brazilian Portuguese version of the HSC questionnaire may be a valid measure and useful to assess the degree of implementation of health promotion interventions based on evidence in local health organizations.

  18. Work, worksites, and wellbeing among North American Indian women: a qualitative study.

    Science.gov (United States)

    Christiansen, Karina; Gadhoke, Preety; Pardilla, Marla; Gittelsohn, Joel

    2017-04-10

    The purpose of this study was to understand what factors influenced work-family balance and related health behaviors among a sample of rural North American Indian women. We interviewed 89 women through both in-depth interviews and focus groups across four tribal communities in the American Southwest and Upper Midwest between July 2010 and August 2011. Interviews were transcribed, coded, and analyzed for emerging themes related to work- family demands placed on women and resources available to cope with those demands. Three prominent themes emerged: structural characteristics (the context of rural reservation life), role stressors (women's multiple and conflicting roles) and the influence of social support (communal nature of care in the family and institutional support in the workplace). We found that women in participating rural reservation communities often acted as primary caregivers for both immediate and extended family, and often placed the needs of others before themselves. The context of rural reservations, with high rates of unemployment, poverty, and chronic illnesses associated with the collective trauma of colonization, placed high demands on female caregivers. Social support from within the workplace, family, and cultural traditions helped some female caregivers balance the demands of home and work. Tribal worksites could be a resource for promoting health and work-life balance by being responsive to the particular demands placed on women that often interfere with engaging in positive health behaviors in general and tribal wellness programs in particular.

  19. Worksite Health Promotion for Low-Wage Workers: A Scoping Literature Review.

    Science.gov (United States)

    Stiehl, Emily; Shivaprakash, Namrata; Thatcher, Esther; Ornelas, India J; Kneipp, Shawn; Baron, Sherry L; Muramatsu, Naoko

    2018-02-01

    To determine: (1) What research has been done on health promotion interventions for low-wage workers and (2) what factors are associated with effective low-wage workers' health promotion programs. This review includes articles from PubMed and PsychINFO published in or before July 2016. Study Inclusion/Exclusion Criteria: The search yielded 130 unique articles, 35 met the inclusion criteria: (1) being conducted in the United States, (2) including an intervention or empirical data around health promotion among adult low-wage workers, and (3) measuring changes in low-wage worker health. Central features of the selected studies were extracted, including the theoretical foundation; study design; health promotion intervention content and delivery format; intervention-targeted outcomes; sample characteristics; and work, occupational, and industry characteristics. Consistent with a scoping review, we used a descriptive, content analysis approach to analyze extracted data. All authors agreed upon emergent themes and 2 authors independently coded data extracted from each article. The results suggest that the research on low-wage workers' health promotion is limited, but increasing, and that low-wage workers have limited access to and utilization of worksite health promotion programs. Workplace health promotion programs could have a positive effect on low-wage workers, but more work is needed to understand how to expand access, what drives participation, and which delivery mechanisms are most effective.

  20. Does a video displaying a stair climbing model increase stair use in a worksite setting?

    Science.gov (United States)

    Van Calster, L; Van Hoecke, A-S; Octaef, A; Boen, F

    2017-08-01

    This study evaluated the effects of improving the visibility of the stairwell and of displaying a video with a stair climbing model on climbing and descending stair use in a worksite setting. Intervention study. Three consecutive one-week intervention phases were implemented: (1) the visibility of the stairs was improved by the attachment of pictograms that indicated the stairwell; (2) a video showing a stair climbing model was sent to the employees by email; and (3) the same video was displayed on a television screen at the point-of-choice (POC) between the stairs and the elevator. The interventions took place in two buildings. The implementation of the interventions varied between these buildings and the sequence was reversed. Improving the visibility of the stairs increased both stair climbing (+6%) and descending stair use (+7%) compared with baseline. Sending the video by email yielded no additional effect on stair use. By contrast, displaying the video at the POC increased stair climbing in both buildings by 12.5% on average. One week after the intervention, the positive effects on stair climbing remained in one of the buildings, but not in the other. These findings suggest that improving the visibility of the stairwell and displaying a stair climbing model on a screen at the POC can result in a short-term increase in both climbing and descending stair use. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  1. Stress management at the worksite: reversal of symptoms profile and cardiovascular dysregulation.

    Science.gov (United States)

    Lucini, Daniela; Riva, Silvano; Pizzinelli, Paolo; Pagani, Massimo

    2007-02-01

    Work stress may increase cardiovascular risk either indirectly, by inducing unhealthy life styles, or directly, by affecting the autonomic nervous system and arterial pressure. We hypothesized that, before any apparent sign of disease, work-related stress is already accompanied by alterations of RR variability profile and that a simple onsite stress management program based on cognitive restructuring and relaxation training could reduce the level of stress symptoms, revert stress-related autonomic nervous system dysregulation, and lower arterial pressure. We compared 91 white-collar workers, enrolled at a time of work downsizing (hence, in a stress condition), with 79 healthy control subjects. Psychological profiles were assessed by questionnaires and autonomic nervous system regulation by spectral analysis of RR variability. We also tested a simple onsite stress management program (cognitive restructuring and relaxation training) in a subgroup of workers compared with a sham subgroup (sham program). Workers presented an elevated level of stress-related symptoms and an altered variability profile as compared with control subjects (low-frequency component of RR variability was, respectively, 65.2+/-2 versus 55.3+/-2 normalized units; Pstress management program, which also slightly lowered systolic arterial pressure. No changes were observed in the sham program group. This noninvasive study indicates that work stress is associated with unpleasant symptoms and with an altered autonomic profile and suggests that a stress management program could be implemented at the worksite, with possible preventive advantages for hypertension.

  2. Policy, environment, and worksite fitness program participation among financial enterprise employees in Taiwan.

    Science.gov (United States)

    Huang, Sheu-Jen; Hung, Wen-Chi

    2016-06-01

    This study explored the intertwined effects between the policies and regulations of the companies and personal background on participation in the physical fitness programs and leisure-time activities in financial enterprises. A total of 823 employees were selected as the sample with the multilevel stratification random-sampling technique. The response rate was 52.0%. Data were analyzed with descriptive statistics and hierarchical linear logistic regression. Thirty-two percent and 39% of the employees participated in the physical fitness programs and leisure-time activities, respectively. The factors affecting participation were categorized into intrapersonal factors, interpersonal processes, and primary groups, as well as institutional factors. In the interpersonal processes and primary groups level, higher family social support, more equipment in health promotion was associated with more participation in the programs. With the influence from the institutional level, it was found that health promotion policy amplified the relationship between employees' age and participation, but attenuated the relationship between education level and participation. Health promotion equipment in the institutes attenuated the relationship between colleague social support, family social support, and education level with program participation. Physical activity equipment in the community attenuated the relationship between family social support and program participation. The influential factors of social support and worksite environment could predict the employees' participation in the physical fitness programs and leisure-time physical activities. Health promotion policy and equipment attenuated the negative effects of nonparticipation as well as amplified the positive effects of participation.

  3. Worksite Health Promotion for Low-wage Workers: A Scoping Literature Review

    Science.gov (United States)

    Stiehl, Emily; Shivaprakash, Namrata; Thatcher, Esther; Ornelas, India J.; Kneipp, Shawn; Baron, Sherry L.; Muramatsu, Naoko

    2018-01-01

    Objective To determine: (1) What research has been done on health promotion interventions for low-wage workers and (2) What factors are associated with effective low-wage workers’ health promotion. Data Source This review includes articles from PubMed and PsychINFO published in or before July 2016 Study Inclusion/Exclusion Criteria The search yielded 130 unique articles, 35 met the inclusion criteria: (1) being conducted in the US, (2) including an intervention or empirical data around health promotion among adult low-wage workers, and (3) measuring changes in low-wage worker health. Data Extraction Central features of the selected studies were extracted, including the theoretical foundation, study design, health promotion intervention content and delivery format, intervention targeted outcomes, sample characteristics, and work, occupational, and industry characteristics. Data Analysis Consistent with a scoping review, we used a descriptive, content analysis approach to analyze extracted data. All authors agreed upon emergent themes and two authors independently coded data extracted from each article. Results The results suggest that the research on low-wage workers’ health promotion is limited, but increasing, and that low-wage workers have limited access to and utilization of worksite health promotion programs. Conclusions Workplace health promotion programs could have a positive effect on low-wage workers, but more work is needed to understand how to expand access, what drives participation and which delivery mechanisms are most effective. PMID:28893085

  4. Development and Implementation of Worksite Health and Wellness Programs: A Focus on Non-Communicable Disease.

    Science.gov (United States)

    Cahalin, Lawrence P; Kaminsky, Leonard; Lavie, Carl J; Briggs, Paige; Cahalin, Brendan L; Myers, Jonathan; Forman, Daniel E; Patel, Mahesh J; Pinkstaff, Sherry O; Arena, Ross

    2015-01-01

    The development and implementation of worksite health and wellness programs (WHWPs) in the United States (US) hold promise as a means to improve population health and reverse current trends in non-communicable disease incidence and prevalence. However, WHWPs face organizational, economic, systematic, legal, and logistical challenges which have combined to impact program availability and expansion. Even so, there is a burgeoning body of evidence indicating WHWPs can significantly improve the health profile of participating employees in a cost effective manner. This foundation of scientific knowledge justifies further research inquiry to elucidate optimal WHWP models. It is clear that the development, implementation and operation of WHWPs require a strong commitment from organizational leadership, a pervasive culture of health and availability of necessary resources and infrastructure. Since organizations vary significantly, there is a need to have flexibility in creating a customized, effective health and wellness program. Furthermore, several key legal issues must be addressed to facilitate employer and employee needs and responsibilities; the US Affordable Care Act will play a major role moving forward. The purposes of this review are to: 1) examine currently available health and wellness program models and considerations for the future; 2) highlight key legal issues associated with WHWP development and implementation; and 3) identify challenges and solutions for the development and implementation of as well as adherence to WHWPs. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Facing Complaining Customer and Suppressed Emotion at Worksite Related to Sleep Disturbance in Korea.

    Science.gov (United States)

    Lim, Sung Shil; Lee, Wanhyung; Hong, Kwanyoung; Jeung, Dayee; Chang, Sei Jin; Yoon, Jin Ha

    2016-11-01

    This study aimed to investigate the effect of facing complaining customer and suppressed emotion at worksite on sleep disturbance among working population. We enrolled 13,066 paid workers (male = 6,839, female = 6,227, age Working Condition Survey (2011). The odds ratio (OR) and 95% confidence intervals (CI) for sleep disturbance occurrence were calculated using multiple logistic regression models. Among workers in working environments where they always engage complaining customers had a significantly higher risk for sleep disturbance than rarely group (The OR [95% CI]; 5.46 [3.43-8.68] in male, 5.59 [3.30-9.46] in female workers). The OR (95% CI) for sleep disturbance was 1.78 (1.16-2.73) and 1.63 (1.02-2.63), for the male and female groups always suppressing their emotions at the workplace compared with those rarely group. Compared to those who both rarely engaged complaining customers and rarely suppressed their emotions at work, the OR (CI) for sleep disturbance was 9.66 (4.34-20.80) and 10.17 (4.46-22.07), for men and women always exposed to both factors. Sleep disturbance was affected by interactions of both emotional demands (engaging complaining customers and suppressing emotions at the workplace). The level of emotional demand, including engaging complaining customers and suppressing emotions at the workplace is significantly associated with sleep disturbance among Korean working population.

  6. [Relationship between organisational structure and worksite health management in the information technology and communications sector].

    Science.gov (United States)

    Ansmann, L; Jung, J; Nitzsche, A; Pfaff, H

    2012-05-01

    Worksite health management (WHM) can positively influence employee health and performance. However, it has not yet been comprehensively implemented in companies. This study aims to identify the role of organisational structures in the implementation of WHM. In this cross-sectional study, data were collected on the companies' WHM and the organisational structure. Out of 522 randomly selected companies within the German information technology and communication (ITC) sector, one managing director for each company was being questioned through telephone interviews. Bivariate and multivariate logistic regression analyses were conducted. The results of the study reveal that the implementation of WHM is positively correlated with a large company size (OR 2.75; 95%-CI 1.10-6.88) and with the existence of an employee representation (OR 2.48; 95%-CI 1.54-3.98). Other structural characteristics, such as the employment of a company physician, the percentage of temporary workers as well as the staff's age and sex distribution do not seem to have a significant impact on the implementation of WHM. The results indicate that the implementation of WHM can only be explained to a certain degree by organisational structures. However, the findings highlight the fact that companies with few structural resources are in particular need of tailored support when implementing WHM. © Georg Thieme Verlag KG Stuttgart · New York.

  7. Edge instabilities of topological superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, Johannes S. [Institut fuer Theoretische Physik und Astrophysik, Universitaet Wuerzburg (Germany); Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany); Assaad, Fakher F. [Institut fuer Theoretische Physik und Astrophysik, Universitaet Wuerzburg (Germany); Schnyder, Andreas P. [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)

    2016-07-01

    Nodal topological superconductors display zero-energy Majorana flat bands at generic edges. The flatness of these edge bands, which is protected by time-reversal and translation symmetry, gives rise to an extensive ground state degeneracy and a diverging density of states. Therefore, even arbitrarily weak interactions lead to an instability of the flat-band edge states towards time-reversal and translation-symmetry broken phases, which lift the ground-state degeneracy. Here, we employ Monte Carlo simulations combined with mean-field considerations to examine the instabilities of the flat-band edge states of d{sub xy}-wave superconductors. We find that attractive interactions induce a complex s-wave pairing instability together with a density wave instability. Repulsive interactions, on the other hand, lead to ferromagnetism mixed with spin-triplet pairing at the edge. We discuss the implications of our findings for experiments on cuprate high-temperature superconductors.

  8. Relationship of cravings with weight loss and hunger. Results from a 6 month worksite weight loss intervention.

    Science.gov (United States)

    Batra, Payal; Das, Sai Krupa; Salinardi, Taylor; Robinson, Lisa; Saltzman, Edward; Scott, Tammy; Pittas, Anastassios G; Roberts, Susan B

    2013-10-01

    We examined the association of food cravings with weight loss and eating behaviors in a lifestyle intervention for weight loss in worksites. This research was part of a randomized controlled trial of a 6-month weight loss intervention versus a wait-listed control in 4 Massachusetts worksites. The intervention emphasized reducing energy intake by adherence to portion-controlled menu suggestions, and assessments were obtained in 95 participants at baseline and 6 months including non-fasting body weight, food cravings (Craving Inventory and Food Craving Questionnaire for state and trait) and the eating behavior constructs restraint, disinhibition and hunger (Eating Inventory). There were statistically significant reductions in all craving variables in the intervention group compared to the controls. Within the intervention group, changes in craving-trait were significantly associated with weight loss after controlling for baseline weight, age, gender and worksite. However, in a multivariate model with craving-trait and eating behaviors (restraint, disinhibition and hunger), hunger was the only significant predictor of weight change. In contrast to some previous reports of increased food cravings with weight loss in lifestyle interventions, this study observed a broad reduction in cravings associated with weight loss. In addition, greater reductions in craving-trait were associated with greater weight change, but craving-trait was not a significant independent correlate of weight change when hunger was included in statistical models. Studies are needed to examine the effectiveness of hunger suppressing versus craving-suppressing strategies in lifestyle interventions for obesity. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Farm to Work: Development of a Modified Community-Supported Agriculture Model at Worksites, 2007-2012.

    Science.gov (United States)

    Thi, Christina A; Horton, Karissa D; Loyo, Jennifer; Jowers, Esbelle M; Rodgers, Lindsay Faith; Smiley, Andrew W; Leversen, Eric; Hoelscher, Deanna M

    2015-10-22

    The Farm to Work program is a modified community-supported agriculture model at worksites in Texas. The objective of the Farm to Work program is to increase fruit and vegetable intake among employees and their households by decreasing cost, improving convenience, and increasing access while also creating a new market for local farmers at worksites. The objectives of this article were to describe the development, implementation, and outcome of a 5-year participation trend analysis and to describe the community relationships that were formed to enable the successful implementation of the program. The Farm to Work program began in November 2007 as a collaborative effort between the nonprofit Sustainable Food Center, the Texas Department of State Health Services, the Web development company WebChronic Consulting LLC, and Naegelin Farm. The program provides a weekly or biweekly opportunity for employees to order a basket of produce online to be delivered to the worksite by a local farmer. A 5-year participation trend analysis, including seasonal variation and sales trends, was conducted using sales data from November 2007 through December 2012. The total number of baskets delivered from November 2007 through December 2012 was 38,343; of these, 37,466 were sold and 877 were complimentary. The total value of sold and complimentary baskets was $851,035 and $21,925, respectively. Participation in the program increased over time and was highest in 2012. The Farm to Work program increased access to locally grown fruits and vegetables for employees and created a new market for farmers. Increased program participation indicates that Farm to Work can increase employees' fruit and vegetable consumption and thus help prevent chronic diseases in this population.

  10. The edge of space time

    International Nuclear Information System (INIS)

    Hawking, S.

    1993-01-01

    What happened at the beginning of the expansion of the universe. Did space time have an edge at the Big Bang. The answer is that, if the boundary conditions of the universe are that it has no boundary, time ceases to be well-defined in the very early universe as the direction ''north'' ceases to be well defined at the North Pole of the Earth. The quantity that we measure as time has a beginning but that does not mean spacetime has an edge, just as the surface of the Earth does not have an edge at the North Pole. 8 figs

  11. Reduction of airfoil trailing edge noise by trailing edge blowing

    International Nuclear Information System (INIS)

    Gerhard, T; Carolus, T; Erbslöh, S

    2014-01-01

    The paper deals with airfoil trailing edge noise and its reduction by trailing edge blowing. A Somers S834 airfoil section which originally was designed for small wind turbines is investigated. To mimic realistic Reynolds numbers the boundary layer is tripped on pressure and suction side. The chordwise position of the blowing slot is varied. The acoustic sources, i.e. the unsteady flow quantities in the turbulent boundary layer in the vicinity of the trailing edge, are quantified for the airfoil without and with trailing edge blowing by means of a large eddy simulation and complementary measurements. Eventually the far field airfoil noise is measured by a two-microphone filtering and correlation and a 40 microphone array technique. Both, LES-prediction and measurements showed that a suitable blowing jet on the airfoil suction side is able to reduce significantly the turbulence intensity and the induced surface pressure fluctuations in the trailing edge region. As a consequence, trailing edge noise associated with a spectral hump around 500 Hz could be reduced by 3 dB. For that a jet velocity of 50% of the free field velocity was sufficient. The most favourable slot position was at 90% chord length

  12. The effect of worksite physical activity intervention on physical capacity, health, and productivity: A 1-year randomized controlled trial

    DEFF Research Database (Denmark)

    Pedersen, Mogens T; Blangsted, Anne K.; Andersen, Lars L.

    2009-01-01

    uptake (APE) increased approximately 10%. CONCLUSIONS: Worksite intervention with both SRT as well as APE is recommended, since these activities compared with REF resulted in clinically relevant reductions of cardiovascular and metabolic syndrome-related risk factors as well as musculoskeletal pain......OBJECTIVE: To investigate the effect of two contrasting physical activity worksite interventions versus a reference intervention (REF) on various health outcomes. METHODS: A 1-year randomized controlled trial was conducted with specific resistance training (SRT), all-round physical exercise (APE...

  13. Successful strategies to increase the consumption of fruits and vegetables: results from the Danish '6 a day' Work-site Canteen Model Study

    DEFF Research Database (Denmark)

    Lassen, Anne Dahl; Thorsen, Anne Vibeke; Trolle, Ellen

    2004-01-01

    Objective: To investigate changes in the consumption of fruits and vegetables in work-site canteens using the tools of continuous quality improvement, and to gain knowledge of practical strategies being effective in increasing the consumption. Design: Study design included baseline data collection...... per lunch meal served per customer (net weight; potatoes not included). Setting: Five workplaces in Denmark: a military base, an electronic component distributor, a bank, a town hall and a waste-handling facility. Subjects: Work-site canteen managers, staff and customers. Results: There were...

  14. Strategies for Worksite Health Interventions to Employees with Elevated Risk of Chronic Diseases

    Directory of Open Access Journals (Sweden)

    Lu Meng

    2017-06-01

    Full Text Available Chronic disease rates have become more prevalent in the modern American workforce, which has negative implications for workplace productivity and healthcare costs. Offering workplace health interventions is recognized as an effective strategy to reduce chronic disease progression, absenteeism, and healthcare costs as well as improve population health. This review documents intervention and evaluation strategies used for health promotion programs delivered in workplaces. Using predetermined search terms in five online databases, we identified 1,131 published items from 1995 to 2014. Of these items, 27 peer-reviewed articles met the inclusion criteria; reporting data from completed United States-based workplace interventions that recruited at-risk employees based on their disease or disease-related risk factors. A content rubric was developed and used to catalogue these 27 published field studies. Selected workplace interventions targeted obesity (n = 13, cardiovascular diseases (n = 8, and diabetes (n = 6. Intervention strategies included instructional education/counseling (n = 20, workplace environmental change (n = 6, physical activity (n = 10, use of technology (n = 10, and incentives (n = 13. Self-reported data (n = 21, anthropometric measurements (n = 17, and laboratory tests (n = 14 were used most often in studies with outcome evaluation. This is the first literature review to focus on interventions for employees with elevated risk for chronic diseases. The review has the potential to inform future workplace health interventions by presenting strategies related to implementation and evaluation strategies in workplace settings. These strategies can help determine optimal worksite health programs based on the unique characteristics of work settings and the health risk factors of their employee populations.

  15. Prevalence of obesity and factors associated with it in a worksite setting in Malaysia.

    Science.gov (United States)

    Cheong, Siew Man; Kandiah, Mirnalini; Chinna, Karuthan; Chan, Yoke Mun; Saad, Hazizi Abu

    2010-12-01

    Socio-economic status, lifestyle behaviors, and psychosocial factors have been implicated in the development of overweight and obesity. This study aims to observe the prevalence of overweight and obesity in an academic worksite and to examine the possible association between variables such as socio-economic characteristics, work factors, psychosocial factors, and weight control behaviors and obesity. In this study, the target population were full-time academic and non-academic staff. Body mass index (BMI) and waist circumference (WC) were computed to determine obesity. A pretested self-administered questionnaire was used to obtain information on socio-demographic factors, work related factors, psychosocial factors, and weight control behaviors. Data were obtained on 367 adults of whom 39.2% were males and 60.8% females. Overweight was seen in 31.9% of males and 26.5% of females while 16.1% of them were obese, irrespective of gender. Central obesity was noted in about 37% of males and 39% of females. The results showed that socio-demographic factors (age, gender, and education) and psychosocial factors (perceived health status, body weight perception, and weight-control goals) were significantly associated with BMI. Working hours were also significantly associated with BMI. However, weight control practices (diet-control practices and physical activity practices) were not significantly associated with BMI. In conclusion, this study found a higher prevalence of overweight and obesity among employees of a selected public university in comparison to the general population. Socio-demographic, psychosocial factors, and working hours were found to contribute to obesity in this sample of adults.

  16. Impact of financial incentives on behavior change program participation and risk reduction in worksite health promotion.

    Science.gov (United States)

    Gingerich, Stefan B; Anderson, David R; Koland, Heidi

    2012-01-01

    To examine the impact of financial incentives on behavior change program registration, completion, and risk improvement rates. Retrospective cohort study conducted to observe the relationship between financial incentives and behavior change program registration, completion, and risk improvement rates. Large public- or private-sector employers. Twenty-four organizations (n = 511,060 eligible employees) that offered comprehensive worksite health promotion (WHP) programs. Financial incentives offered for completion of a behavior change program as part of a WHP program. Behavior change program registration and completion data were obtained from standard reports. Company-level risk change was calculated from the average per-person number of risks on baseline and follow-up health risk assessments. Incentive design was determined from questionnaires completed by WHP program managers. Average registration rates, program completion rates, and risk improvement rates were compared using t-tests for companies that did versus did not offer incentives. Comparisons were also made between companies with incentives of less than $100 and those with incentives of $100 or more. Correlations between incentive value and outcome variables were assessed using Pearson correlations. Companies that offered incentives had significantly higher health coaching completion rates than companies not offering an incentive (82.9% vs. 76.4%, respectively, p = .017) but there was no significant association with registration (p = .384) or risk improvement rates (p = .242). Incentive values were not significantly associated with risk improvement rates (p = .240). Offering incentives for completing behavior change programs may increase completion rates, but increased health improvement does not necessarily follow.

  17. Production patterns of packaging waste categories generated at typical Mediterranean residential building worksites

    Energy Technology Data Exchange (ETDEWEB)

    González Pericot, N., E-mail: natalia.gpericot@upm.es [Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Calle Juan de Herrera n°6, 28040 Madrid (Spain); Villoria Sáez, P., E-mail: paola.villoria@upm.es [Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Calle Juan de Herrera n°6, 28040 Madrid (Spain); Del Río Merino, M., E-mail: mercedes.delrio@upm.es [Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Calle Juan de Herrera n°6, 28040 Madrid (Spain); Liébana Carrasco, O., E-mail: oscar.liebana@uem.es [Escuela de Arquitectura, Universidad Europea de Madrid, Calle Tajo s/n, 28670 Villaviciosa de Odón (Spain)

    2014-11-15

    Highlights: • On-site segregation level: 1.80%; training and motivation strategies were not effective. • 70% Cardboard waste: from switches and sockets during the building services stage. • 40% Plastic waste: generated during structures and partition works due to palletizing. • >50% Wood packaging waste, basically pallets, generated during the envelope works. - Abstract: The construction sector is responsible for around 28% of the total waste volume generated in Europe, which exceeds the amount of household waste. This has led to an increase of different research studies focusing on construction waste quantification. However, within the research studies made, packaging waste has been analyzed to a limited extent. This article focuses on the packaging waste stream generated in the construction sector. To this purpose current on-site waste packaging management has been assessed by monitoring ten Mediterranean residential building works. The findings of the experimental data collection revealed that the incentive measures implemented by the construction company to improve on-site waste sorting failed to achieve the intended purpose, showing low segregation ratios. Subsequently, through an analytical study the generation patterns for packaging waste are established, leading to the identification of the prevailing kinds of packaging and the products responsible for their generation. Results indicate that plastic waste generation maintains a constant trend throughout the whole construction process, while cardboard becomes predominant towards the end of the construction works with switches and sockets from the electricity stage. Understanding the production patterns of packaging waste will be beneficial for adapting waste management strategies to the identified patterns for the specific nature of packaging waste within the context of construction worksites.

  18. Strategies for Worksite Health Interventions to Employees with Elevated Risk of Chronic Diseases.

    Science.gov (United States)

    Meng, Lu; Wolff, Marilyn B; Mattick, Kelly A; DeJoy, David M; Wilson, Mark G; Smith, Matthew Lee

    2017-06-01

    Chronic disease rates have become more prevalent in the modern American workforce, which has negative implications for workplace productivity and healthcare costs. Offering workplace health interventions is recognized as an effective strategy to reduce chronic disease progression, absenteeism, and healthcare costs as well as improve population health. This review documents intervention and evaluation strategies used for health promotion programs delivered in workplaces. Using predetermined search terms in five online databases, we identified 1,131 published items from 1995 to 2014. Of these items, 27 peer-reviewed articles met the inclusion criteria; reporting data from completed United States-based workplace interventions that recruited at-risk employees based on their disease or disease-related risk factors. A content rubric was developed and used to catalogue these 27 published field studies. Selected workplace interventions targeted obesity ( n   =  13), cardiovascular diseases ( n   =  8), and diabetes ( n   =  6). Intervention strategies included instructional education/counseling ( n   =  20), workplace environmental change ( n   =  6), physical activity ( n   =  10), use of technology ( n   =  10), and incentives ( n   =  13). Self-reported data ( n   =  21), anthropometric measurements ( n   =  17), and laboratory tests ( n   =  14) were used most often in studies with outcome evaluation. This is the first literature review to focus on interventions for employees with elevated risk for chronic diseases. The review has the potential to inform future workplace health interventions by presenting strategies related to implementation and evaluation strategies in workplace settings. These strategies can help determine optimal worksite health programs based on the unique characteristics of work settings and the health risk factors of their employee populations.

  19. Reducing the risk of metabolic syndrome at the worksite: preliminary experience with an ecological approach.

    Science.gov (United States)

    Lucini, Daniela; Zanuso, Silvano; Solaro, Nadia; Vigo, Chiara; Malacarne, Mara; Pagani, Massimo

    2016-02-01

    Given the time spent at work, the workplace represents an ideal setting to implement preventive programs for non-communicable diseases, the major cause of mortality and morbidity in Western and developing countries. We sought to verify if an ecological approach based on corporate culture, employees' education and concrete modifications of workplace environment, offering easy opportunity to assume healthy lifestyle, could be associated with reduced cardiometabolic risk. The study involved 1089 workers in two multinational companies following different workplace health promotion policies. Company A offered to all employees the opportunity to access a web platform dedicated to general information on health and diseases. Company B implemented an ecological model encompassing company culture, employees' education and concrete modifications of workplace environment, giving to all employees the opportunity to adopt healthy solutions throughout daily living at workplace. Participants volunteered self-reported clinical information using an IT tool. Numbers of Metabolic Syndrome components (MetS) were taken as proxy of cardiometabolic risk. MetS probability obtained via statistical modeling was lower in company B as compared to company A, and absenteeism was also lower in company B. Our study shows that a work environment favoring assumption of healthy lifestyle, as in company B, is associated with a lower percentage of employees with MetS components and lower absenteeism. Moreover, statistical modeling shows that individual probabilities of being without MetS elements, controlling for age and gender, is remarkably higher in company B. Our data suggest that ecological approaches might be useful in worksite prevention policies.

  20. Production patterns of packaging waste categories generated at typical Mediterranean residential building worksites

    International Nuclear Information System (INIS)

    González Pericot, N.; Villoria Sáez, P.; Del Río Merino, M.; Liébana Carrasco, O.

    2014-01-01

    Highlights: • On-site segregation level: 1.80%; training and motivation strategies were not effective. • 70% Cardboard waste: from switches and sockets during the building services stage. • 40% Plastic waste: generated during structures and partition works due to palletizing. • >50% Wood packaging waste, basically pallets, generated during the envelope works. - Abstract: The construction sector is responsible for around 28% of the total waste volume generated in Europe, which exceeds the amount of household waste. This has led to an increase of different research studies focusing on construction waste quantification. However, within the research studies made, packaging waste has been analyzed to a limited extent. This article focuses on the packaging waste stream generated in the construction sector. To this purpose current on-site waste packaging management has been assessed by monitoring ten Mediterranean residential building works. The findings of the experimental data collection revealed that the incentive measures implemented by the construction company to improve on-site waste sorting failed to achieve the intended purpose, showing low segregation ratios. Subsequently, through an analytical study the generation patterns for packaging waste are established, leading to the identification of the prevailing kinds of packaging and the products responsible for their generation. Results indicate that plastic waste generation maintains a constant trend throughout the whole construction process, while cardboard becomes predominant towards the end of the construction works with switches and sockets from the electricity stage. Understanding the production patterns of packaging waste will be beneficial for adapting waste management strategies to the identified patterns for the specific nature of packaging waste within the context of construction worksites

  1. Diffraction at a Straight Edge

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 5. Diffraction at a Straight Edge: A Gem from Sommerfeld's Work in Classical Physics. Rajaram Nityananda. General Article Volume 20 Issue 5 May 2015 pp 389-400 ...

  2. DAVs: Red Edge and Outbursts

    Science.gov (United States)

    Luan, Jing

    2018-04-01

    As established by ground based surveys, white dwarfs with hydrogen atmospheres pulsate as they cool across the temperature range, 12500Kred edge is a two-decade old puzzle. Recently, Kepler discovered a number of cool DAVs exhibiting sporadic outbursts separated by days, each lasting several hours, and releasing \\sim 10^{33}-10^{34} {erg}. We provide quantitative explanations for both the red edge and the outbursts. The minimal frequency for overstable modes rises abruptly near the red edge. Although high frequency overstable modes exist below the red edge, their photometric amplitudes are generally too small to be detected by ground based observations. Nevertheless, these overstable parent modes can manifest themselves through nonlinear mode couplings to damped daughter modes which generate limit cycles giving rise to photometric outbursts.

  3. Edge Fracture in Complex Fluids.

    Science.gov (United States)

    Hemingway, Ewan J; Kusumaatmaja, Halim; Fielding, Suzanne M

    2017-07-14

    We study theoretically the edge fracture instability in sheared complex fluids, by means of linear stability analysis and direct nonlinear simulations. We derive an exact analytical expression for the onset of edge fracture in terms of the shear-rate derivative of the fluid's second normal stress difference, the shear-rate derivative of the shear stress, the jump in shear stress across the interface between the fluid and the outside medium (usually air), the surface tension of that interface, and the rheometer gap size. We provide a full mechanistic understanding of the edge fracture instability, carefully validated against our simulations. These findings, which are robust with respect to choice of rheological constitutive model, also suggest a possible route to mitigating edge fracture, potentially allowing experimentalists to achieve and accurately measure flows stronger than hitherto possible.

  4. Edge of polar cap patches

    Science.gov (United States)

    Hosokawa, K.; Taguchi, S.; Ogawa, Y.

    2016-04-01

    On the night of 4 December 2013, a sequence of polar cap patches was captured by an all-sky airglow imager (ASI) in Longyearbyen, Norway (78.1°N, 15.5°E). The 630.0 nm airglow images from the ASI of 4 second exposure time, oversampled the emission of natural lifetime (with quenching) of at least ˜30 sec, introduce no observational blurring effects. By using such high-quality ASI images, we succeeded in visualizing an asymmetry in the gradients between the leading/trailing edges of the patches in a 2-D fashion. The gradient in the leading edge was found to be 2-3 times steeper than that in the trailing edge. We also identified fingerlike structures, appearing only along the trailing edge of the patches, whose horizontal scale size ranged from 55 to 210 km. These fingers are considered to be manifestations of plasma structuring through the gradient-drift instability (GDI), which is known to occur only along the trailing edge of patches. That is, the current 2-D observations visualized, for the first time, how GDI stirs the patch plasma and such a mixing process makes the trailing edge more gradual. This result strongly implies a close connection between the GDI-driven plasma stirring and the asymmetry in the large-scale shape of patches and then suggests that the fingerlike structures can be used as markers to estimate the fine-scale structure in the plasma flow within patches.

  5. State smoking restrictions for private-sector worksites, restaurants, and bars--United States, 2004 and 2007.

    Science.gov (United States)

    2008-05-23

    Secondhand smoke (SHS) contains more than 50 carcinogens and causes heart disease and lung cancer in nonsmoking adults. Eliminating smoking in indoor spaces is the only way to fully protect nonsmokers from SHS exposure. Smoking restrictions limit smoking to certain areas within a venue; smoke-free policies prohibit smoking within the entire venue. A Healthy People 2010 objective (27-13) calls for establishing laws in all 50 states and the District of Columbia (DC) that make indoor public places and worksites completely smoke-free. To assess progress toward meeting this objective, CDC reviewed the status of state laws restricting smoking in effect as of December 31, 2007, updating a 2005 study that reported on such laws as of December 31, 2004. This report summarizes the changes in state smoking restrictions for private-sector worksites, restaurants, and bars that occurred from 2004 to 2007. The findings indicated a substantial increase in the number and restrictiveness of state laws regulating smoking in these three settings, providing nonsmokers with increased protection from the health risks posed by SHS. If current trends continue, achieving the national health objective by 2010 might be possible.

  6. Promoting weight control at the worksite: a pilot program of self-motivation using payroll-based incentives.

    Science.gov (United States)

    Jeffery, R W; Forster, J L; Snell, M K

    1985-03-01

    Thirty-six individuals participated in a worksite weight-loss program in which the central component was a self-motivation program of biweekly payroll deductions refunded contingent on meeting self-selected weight-loss goals. Half were assigned to early treatment and the remainder to a delayed treatment control group. Nine additional individuals also enrolled at the time of delayed treatment and were included in descriptive analyses of factors associated with weight loss. Results showed low program attrition over 6 months (6%) and mean weight losses (12.3 lb) that are competitive with those obtained in clinical settings. Although not different at baseline, participants in the delayed treatment group lost more than twice as much weight as those in the early treatment condition. This difference was interpreted as either a strong seasonal effect or a critical mass effect related to the proportion of employees at the worksite participating in the program. We conclude that self-motivation programs for health behavior change using the payroll system as an organization framework offer a promising new methodology for promoting healthful behaviors in work settings.

  7. Effects of a Worksite Supervised Adapted Physical Activity Program on Trunk Muscle Endurance, Flexibility, and Pain Sensitivity Among Vineyard Workers.

    Science.gov (United States)

    Balaguier, Romain; Madeleine, Pascal; Rose-Dulcina, Kévin; Vuillerme, Nicolas

    2017-01-01

    In viticulture, the prevalence of low back pain is particularly high among vineyard workers exposed to sustained and awkward postures. One promising setting for low back pain prevention resides in the implementation of workplace physical activity. This nonrandomized pilot study aims at evaluating the effects of a worksite supervised adapted physical activity program among 17 vineyard workers volunteered to enter either an intervention group (n = 10) or a control group (n = 7).The intervention group followed a physical activity program for 8 weeks involving (1) 15 minutes of warm-up every working day and (2) two weekly 1-hour adapted physical activity sessions targeting trunk muscle endurance and flexibility. The control group was advised to continue normal physical activity. Evaluations were carried out at weeks 0, 4, 8, and 12. Physical capacity was assessed using flexibility tests for the trunk, along with trunk muscle flexor and extensor endurance tests. Finally, pain sensitivity was evaluated by assessing pressure pain thresholds over 14 anatomical locations in the low back region. For the intervention group, the endurance of the trunk extensor and flexor significantly increased from baseline to week 8 as well as the pressure pain thresholds. No change was observed for the control group over the same period. These encouraging results in combination with the high adherence rate set interesting foundations for the promotion of worksite supervised adapted physical activity and, most likely, offer a new promising approach to prevent low back pain among vineyard workers.

  8. Occupation is related to Weight and Lifestyle Factors among Employees at Worksites Involved in a Weight Gain Prevention Study

    Science.gov (United States)

    Gans, Kim M.; Salkeld, Judith; Risica, Patricia Markham; Lenz, Erin; Burton, Deborah; Mello, Jennifer; Bell, Johanna P.

    2015-01-01

    Objective To examine the relationship between job type, weight status and lifestyle factors that are potential contributors to obesity including, diet, physical activity and perceived stress among employees enrolled in the Working on Wellness (WOW) project. Methods Randomly selected employees at 24 worksites completed a baseline survey (n=1700); some also an in-person survey and anthropometric measures (n=1568). Employees were classified by US Labor standards as: white collar (n=1297), blue collar (n=303), or service worker (n=92), 8 unknown. Associations were analyzed using Chi-Square, GLM procedures, and adjusted for demographics using Logistic Regression. Results In unadjusted models, BMI of service workers was higher than white collar workers; F&V intake was higher for service and blue collar than white collar; white collar workers reported highest stress levels in job and life. However, in models adjusted for demographics, the only significant difference was to physical activity (i.e., MET/min per week), with blue collar workers reporting higher levels of physical activity than service workers, who reported higher levels than the white collar workers. Conclusions Future research should further examine the relationship between health and job status to corroborate the results of the current study and to consider designing future worksite health promotion interventions that are tailored by job category. PMID:26461872

  9. A conceptual model for worksite intelligent physical exercise training - IPET - intervention for decreasing life style health risk indicators among employees

    DEFF Research Database (Denmark)

    Sjøgaard, Gisela; Justesen, Just Bendix; Murray, Mike

    2014-01-01

    BACKGROUND: Health promotion at the work site in terms of physical activity has proven positive effects but optimization of relevant exercise training protocols and implementation for high adherence are still scanty.Methods/design: The aim of this paper is to present a study protocol with a conce......BACKGROUND: Health promotion at the work site in terms of physical activity has proven positive effects but optimization of relevant exercise training protocols and implementation for high adherence are still scanty.Methods/design: The aim of this paper is to present a study protocol...... parts, and functional training including balance training. The hypotheses of this research are that individually tailored worksite-based intelligent physical exercise training, IPET, among workers with inactive job categories will: 1) Improve cardiorespiratory fitness and/or individual health risk...... indicators, 2) Improve muscle strength and decrease musculoskeletal disorders, 3) Succeed in regular adherence to worksite and leisure physical activity training, and 3) Reduce sickness absence and productivity losses (presenteeism) in office workers. The present RCT study enrolled almost 400 employees...

  10. A worksite vegan nutrition program is well-accepted and improves health-related quality of life and work productivity.

    Science.gov (United States)

    Katcher, Heather I; Ferdowsian, Hope R; Hoover, Valerie J; Cohen, Joshua L; Barnard, Neal D

    2010-01-01

    Vegetarian and vegan diets are effective in preventing and treating several chronic diseases. However, their acceptability outside a clinical trial setting has not been extensively studied. The aim of this study was to determine the acceptability of a worksite vegan nutrition program and its effects on health-related quality of life and work productivity. Employees of a major insurance corporation with a body mass index > or =25 kg/m(2) and/or a previous diagnosis of type 2 diabetes received either weekly group instruction on a low-fat vegan diet (n = 68) or received no diet instruction (n = 45) for 22 weeks. The vegan group reported improvements in general health (p = 0.002), physical functioning (p = 0.001), mental health (p = 0.03), vitality (p = 0.004), and overall diet satisfaction (p vegan group also reported a decrease in food costs (p = 0.003), and increased difficulty finding foods when eating out (p = 0.04) compared with the control group. The vegan group reported a 40-46% decrease in health-related productivity impairments at work (p = 0.03) and in regular daily activities (p = 0.004). A worksite vegan nutrition program is well-accepted and can be implemented by employers to improve the health, quality of life, and work productivity of employees.

  11. Protected Edge Modes without Symmetry

    Directory of Open Access Journals (Sweden)

    Michael Levin

    2013-05-01

    Full Text Available We discuss the question of when a gapped two-dimensional electron system without any symmetry has a protected gapless edge mode. While it is well known that systems with a nonzero thermal Hall conductance, K_{H}≠0, support such modes, here we show that robust modes can also occur when K_{H}=0—if the system has quasiparticles with fractional statistics. We show that some types of fractional statistics are compatible with a gapped edge, while others are fundamentally incompatible. More generally, we give a criterion for when an electron system with Abelian statistics and K_{H}=0 can support a gapped edge: We show that a gapped edge is possible if and only if there exists a subset of quasiparticle types M such that (1 all the quasiparticles in M have trivial mutual statistics, and (2 every quasiparticle that is not in M has nontrivial mutual statistics with at least one quasiparticle in M. We derive this criterion using three different approaches: a microscopic analysis of the edge, a general argument based on braiding statistics, and finally a conformal field theory approach that uses constraints from modular invariance. We also discuss the analogous result for two-dimensional boson systems.

  12. The effectiveness of a construction worksite prevention program on work ability, health, and sick leave: Results from a cluster randomized controlled trial

    NARCIS (Netherlands)

    Oude Hengel, K.M.; Blatter, B.M.; Molen, H.F. van der; Bongers, P.M.; Beek, A.J. van der

    2013-01-01

    Objective This study aimed to investigate the effectiveness of a prevention program on work ability, health, and sick leave targeted at construction worksites. Methods A total of 15 departments (N=297 workers) from 6 construction companies participated in this cluster randomized controlled trial and

  13. The (cost-)effectiveness of an individually tailored long-term worksite health promotion programme on physical activity and nutrition: design of a pragmatic cluster randomised controlled trial

    NARCIS (Netherlands)

    S.J.W. Robroek (Suzan); F.J. Bredt (Folef); A. Burdorf (Alex)

    2007-01-01

    textabstractCardiovascular disease is the leading cause of disability and mortality in most Western countries. The prevalence of several risk factors, most notably low physical activity and poor nutrition, is very high. Therefore, lifestyle behaviour changes are of great importance. The worksite

  14. Systematic review on the financial return of worksite health promotion programmes aimed at improving nutrition and/or increasing physical activity

    NARCIS (Netherlands)

    Dongen, J.M. van; Proper, K.I.; Wier, M.F. van; Beek, A.J. van der; Bongers, P.M.; Mechelen, W. van; Tulder, M.W. van

    2011-01-01

    Summary: This systematic review summarizes the current evidence on the financial return of worksite health promotion programmes aimed at improving nutrition and/or increasing physical activity. Data on study characteristics and results were extracted from 18 studies published up to 14 January 2011.

  15. Effectiveness of a worksite mindfulness-related multi-component health promotion intervention on work engagement and mental health: Results of a randomized controlled trial

    NARCIS (Netherlands)

    Berkel, J. van; Boot, C.R.L.; Proper, K.I.; Bongers, P.M.; Beek, A.J. van der

    2014-01-01

    Objectives: The aim of the present study was to evaluate the effectiveness of a worksite mindfulness-related multicomponent health promotion intervention on work engagement, mental health, need for recovery and mindfulness. Methods: In a randomized controlled trial design, 257 workers of two

  16. Effectiveness of a Worksite Mindfulness-Related Multi-Component Health Promotion Intervention on Work Engagement and Mental Health: Results of a Randomized Controlled Trial

    NARCIS (Netherlands)

    van Berkel, J.; Boot, C.R.L.; Proper, K.I.; Bongers, P.M.; van der Beek, A.J.

    2014-01-01

    Objectives: The aim of the present study was to evaluate the effectiveness of a worksite mindfulness-related multicomponent health promotion intervention on work engagement, mental health, need for recovery and mindfulness. Methods: In a randomized controlled trial design, 257 workers of two

  17. All-graphene edge contacts

    DEFF Research Database (Denmark)

    Jacobsen, Kåre Wedel; Falkenberg, Jesper Toft; Papior, Nick Rübner

    2016-01-01

    Using ab-initio methods we investigate the possibility of three-terminalgraphene "T-junction" devices and show that these all-graphene edge contactsare energetically feasible when the 1D interface itself is free from foreignatoms. We examine the energetics of various junction structures as a func......Using ab-initio methods we investigate the possibility of three-terminalgraphene "T-junction" devices and show that these all-graphene edge contactsare energetically feasible when the 1D interface itself is free from foreignatoms. We examine the energetics of various junction structures...... to be in therange of 1-10 kΩμm which is comparable to the best contact resistance reportedfor edge-contacted graphene-metal contacts. We conclude that conductingall-carbon T-junctions should be feasible....

  18. Improving color constancy by photometric edge weighting

    NARCIS (Netherlands)

    Gijsenij, A.; Gevers, T.; van de Weijer, J.

    2012-01-01

    Edge-based color constancy methods make use of image derivatives to estimate the illuminant. However, different edge types exist in real-world images, such as material, shadow, and highlight edges. These different edge types may have a distinctive influence on the performance of the illuminant

  19. The knife-edge chamber

    International Nuclear Information System (INIS)

    Barasch, E.F.; Bowcock, T.J.V.; Drew, M.M.; Elliott, S.M.; Lee, B.; McIntyre, P.M.; Pang, Y.; Popovic, M.; Smith, D.D.

    1990-01-01

    In this paper the design for a new technology for particle track detectors is described. Using standard IC fabrication techniques, a pattern of microscopic knife edges and field-shaping electrodes can be fabricated on a silicon substrate. The knife-edge chamber uniquely offers attractive performance for the track chambers required for SSC detectors, for which no present technology is yet satisfactory. Its features include: excellent radiation hardness (10 Mrad), excellent spatial resolution (∼20 μm), short drift time (20 ns), and large pulse height (1 mV)

  20. At the edge of intonation

    DEFF Research Database (Denmark)

    Niebuhr, Oliver

    2012-01-01

    The paper is concerned with the 'edge of intonation' in a twofold sense. It focuses on utterance-final F0 movements and crosses the traditional segment-prosody divide by investigating the interplay of F0 and voiceless fricatives in speech production. An experiment was performed for German with four...

  1. Capillary Sharp Inner Edge Manufacturing

    Czech Academy of Sciences Publication Activity Database

    Hošek, Jan; Studenovský, K.; Najdek, D.

    2009-01-01

    Roč. 19, č. 35 (2009), s. 19-25 ISSN 1584-5982. [MECAHITECH 09 /1./. Bukurešť, 08.10.2009-09.10.2009] R&D Projects: GA AV ČR IAA200760905 Institutional research plan: CEZ:AV0Z20760514 Keywords : capillary * edge * manufacturing Subject RIV: JR - Other Machinery

  2. Development of edge effects around experimental ecosystem hotspots is affected by edge density and matrix type

    Science.gov (United States)

    Ecological edge effects are sensitive to landscape context. In particular, edge effects can be altered by matrix type and by the presence of other nearby edges. We experimentally altered patch configurations in an African savanna to determine how edge density and matrix type influence edge effect de...

  3. A combined usage of stochastic and quantitative risk assessment methods in the worksites: Application on an electric power provider

    International Nuclear Information System (INIS)

    Marhavilas, P.K.; Koulouriotis, D.E.

    2012-01-01

    An individual method cannot build either a realistic forecasting model or a risk assessment process in the worksites, and future perspectives should focus on the combined forecasting/estimation approach. The main purpose of this paper is to gain insight into a risk prediction and estimation methodological framework, using the combination of three different methods, including the proportional quantitative-risk-assessment technique (PRAT), the time-series stochastic process (TSP), and the method of estimating the societal-risk (SRE) by F–N curves. In order to prove the usefulness of the combined usage of stochastic and quantitative risk assessment methods, an application on an electric power provider industry is presented to, using empirical data.

  4. Edge-injective and edge-surjective vertex labellings

    DEFF Research Database (Denmark)

    Brandt, Stephan; Rautenbach, D.; Regen, F.

    2010-01-01

    For a graph G = (V, E) we consider vertex-k-labellings f : V → {1,2, ,k} for which the induced edge weighting w : E → {2, 3,., 2k} with w(uv) = f(u) + f(v) is injective or surjective or both. We study the relation between these labellings and the number theoretic notions of an additive basis and ...

  5. Generalized Multi-Edge Analysis for K-Edge Densitometry

    International Nuclear Information System (INIS)

    Collins, M.

    1998-01-01

    In K-edge densitometry (KED), a continuous-energy x-ray beam is transmitted through a liquid sample. The actinide content of the sample can be measured through analysis of the transmitted portion of the x-ray beam. Traditional methods for KED analysis allow the simultaneous calculation of, at most, two actinide concentrations. A generalized multi-edge KED analytical method is presented, allowing up to six actinide concentrations to be calculated simultaneously. Applications of this method for hybrid KED/x-ray fluorescence (HKED) systems are discussed. Current HKED systems require the operator to know the approximate actinide content of each sample, and manually select the proper analysis mode. The new multi-edge KED technique allows rapid identification of the major actinide components in a sample, independent of actinide content. The proper HKED analysis mode can be selected automatically, without requiring sample content information from the user. Automatic HKED analysis would be especially useful in an analytical laboratory setting, where samples with truly unknown characteristics are encountered. Because this technique requires no hardware modifications, several facilities that use HKED may eventually benefit from this approach

  6. Effectiveness of a worksite lifestyle intervention on vitality, work engagement, productivity, and sick leave: results of a randomized controlled trial.

    Science.gov (United States)

    Strijk, Jorien E; Proper, Karin I; van Mechelen, Willem; van der Beek, Allard J

    2013-01-01

    A worksite lifestyle intervention aiming to improve lifestyle behaviors could be an effective tool to keep older workers vital, and thereby prolong their labor participation. Therefore, this study evaluates the effectiveness of such an intervention on vitality, work engagement, productivity and sick leave. In a randomized controlled trial design, 367 workers (control group: N=363) received a 6-month intervention, which included two weekly guided group sessions: one yoga and one workout, as well as one weekly session of aerobic exercising, without face-to-face instruction, and three individual coach visits aimed at changing workers' lifestyle behavior by goal setting, feedback, and problem-solving strategies. Furthermore, free fruit was provided at the guided sessions. Data on work-related vitality (UWES vitality scale), general vitality (RAND-36 vitality scale), work engagement (UWES), productivity (single item scoring 0-10), and sick leave (yes/no past 3 months) were collected using questionnaires at baseline (N=730), and at 6- (N=575) and 12-months (N=500) follow-up. Effects were analyzed according to the intention-to-treat principle with complete cases (N=500) and imputed data (N=730). There were no significant differences in vitality, work engagement, productivity, and sick leave between the intervention and control group workers after either 6- and 12-months follow-up. Yoga and workout subgroup analyses showed a 12-month favorable effect on work-related vitality [β=0.14, 95% confidence interval (95% CI) 0.04-0.28] and general vitality (β=2.9, 95% CI 0.02-5.9) among high yoga compliers. For high workout compliers, this positive trend was also seen, but it was not statistically significant. Implementation of worksite yoga facilities could be a useful strategy to promote vitality-related work outcomes, but only if high compliance can be maximized. Therefore, impeding factors for participation should be investigated in more detail in future research.

  7. Japanese dietary pattern consistently relates to low depressive symptoms and it is modified by job strain and worksite supports.

    Science.gov (United States)

    Suzuki, Tomoko; Miyaki, Koichi; Tsutsumi, Akizumi; Hashimoto, Hideki; Kawakami, Norito; Takahashi, Masaya; Shimazu, Akihito; Inoue, Akiomi; Kurioka, Sumiko; Kakehashi, Masayuki; Sasaki, Yasuharu; Shimbo, Takuro

    2013-09-05

    This study examined the association between traditional Japanese dietary pattern and depressive symptoms in Japanese workers, employing large-scale samples, considering socioeconomic status (SES) and job stress factors. A cross-sectional study of 2266 Japanese employees aged 21-65 years from all areas of Japan was conducted as part of the Japanese Study of Health, Occupation and Psychosocial factors related Equity (J-HOPE). Habitual diet was assessed by FFQ (BDHQ). The depression degree and job stress factors (job demand, job control, and worksite support) were measured by K6 and Job Content Questionnaire. Participants with high scores for the balanced Japanese dietary pattern were significantly less likely to show probable mood/anxiety disorders (K6≥9) with multivariate adjustment including SES and job stress factors (odds ratio=0.66 [0.51-0.86], trend P=0.002). Other dietary patterns were not associated with depressive symptoms. Even after stratification by job stress factors, the Japanese dietary pattern was consistently protective against depressive symptoms. Furthermore, a highly significant difference between the first and third tertiles of the dietary pattern was observed in participants with active strain (high demand and high control) with low worksite supports (8.5 vs. 5.2, P=0.011). Female participant sample was relatively small. Japanese dietary pattern consistently related to low depressive symptoms in this large-scale cohort of Japanese workers, even after adjusting for SES and job stress factors. The protective impact is especially strong for workers with active strain and low support. Making better use of traditional dietary patterns may facilitate reducing social disparities in mental health. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. Nutrient-dense, Plant-rich Dietary Intervention Effective at Reducing Cardiovascular Disease Risk Factors for Worksites: A Pilot Study.

    Science.gov (United States)

    Sutliffe, Jay Thomas; Fuhrman, Joel Harvey; Carnot, Mary Jo; Beetham, Raena Marie; Peddy, Madison Sarah

    2016-09-01

    conduct interventions for health promotion and disease prevention to ameliorate chronic risk factors for disease, such as for cardiovascular disease (CVD). Likewise, nutrient-dense, plant-rich (NDPR) dietary patterns have been shown to be effective at preventing and improving chronic-disease conditions, including CVD. Objective • The study's aim was to determine the feasibility and effectiveness of an NDPR dietary intervention for worksites to lower CVD risk factors. Design • The study was a 6-wk pilot intervention using a pretest and posttest design. The intervention was conducted at the Northern Arizona University (Flagstaff, AZ, USA) and sponsored by its Employee Assistance and Wellness Department. Participants • Participants were 35 employees with body mass indexes (BMIs) >25 kg/m2 who were ready and willing to make a lifestyle change, who were not currently participating in a weight loss program, and who were not taking any medications that could increase medical risk or had weight loss as a primary side effect. The average age of participants was 42.57 y; 91.4% were female, and 80% were Caucasian. Intervention • The intervention used a dietary protocol consisting of the daily consumption of greens, beans, legumes, and a variety of other vegetables, as well as fresh or frozen whole fruits, nuts, seeds, and whole grains. Participants were encouraged to minimize the consumption of refined grains, vegetable oils, processed foods, and animal products. Outcome Measures • The study measured serum lipids, height, weight, waist and hip circumference, waist-to-hip ratio, and blood pressure. Results • Based on paired-sample t tests and Wilcoxon signed-ranks test with a maximum level of P = .05, the intervention resulted in significant changes in weight, BMI, waist and hip measurements, high-density lipoproteins, low-density lipoproteins, and estimated average glucose. Conclusions • The findings favorably revealed that an NDPR dietary intervention that was

  9. The (cost-effectiveness of an individually tailored long-term worksite health promotion programme on physical activity and nutrition: design of a pragmatic cluster randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Burdorf Alex

    2007-09-01

    Full Text Available Abstract Background Cardiovascular disease is the leading cause of disability and mortality in most Western countries. The prevalence of several risk factors, most notably low physical activity and poor nutrition, is very high. Therefore, lifestyle behaviour changes are of great importance. The worksite offers an efficient structure to reach large groups and to make use of a natural social network. This study investigates a worksite health promotion programme with individually tailored advice in physical activity and nutrition and individual counselling to increase compliance with lifestyle recommendations and sustainability of a healthy lifestyle. Methods/Design The study is a pragmatic cluster randomised controlled trial with the worksite as the unit of randomisation. All workers will receive a standard worksite health promotion program. Additionally, the intervention group will receive access to an individual Health Portal consisting of four critical features: a computer-tailored advice, a monitoring function, a personal coach, and opportunities to contact professionals at request. Participants are employees working for companies in the Netherlands, being literate enough to read and understand simple Internet-based messages in the Dutch language. A questionnaire to assess primary outcomes (compliance with national recommendations on physical activity and on fruit and vegetable intake will take place at baseline and after 12 and 24 months. This questionnaire also assesses secondary outcomes including fat intake, self-efficacy and self-perceived barriers on physical activity and fruit and vegetable intake. Other secondary outcomes, including a cardiovascular risk profile and physical fitness, will be measured at baseline and after 24 months. Apart from the effect evaluation, a process evaluation will be carried out to gain insight into participation and adherence to the worksite health promotion programme. A cost-effectiveness analysis and

  10. Edge imaging in intense beams

    Directory of Open Access Journals (Sweden)

    S. Bernal

    2002-06-01

    Full Text Available The appearance of rings of charge observed near the edge of beams from high-perveance guns is described with a simple ray tracing technique inspired by the particle-core model. We illustrate the technique, which has no analog in light optics, with examples from experiments employing solenoid focusing of an electron beam. The rings of charge result from the combined effects of external focusing and space-charge forces acting on paraxial fringe particles with relatively large initial transverse velocities. The model is independent of the physical mechanisms responsible for the fringe particles. Furthermore, the focal length for edge imaging in a uniform focusing channel is derived using a linearized trajectory equation for the motion of fringe particles. Counterintuitively, the focal length decreases as the beam current increases.

  11. Nonreference Medical Image Edge Map Measure

    Directory of Open Access Journals (Sweden)

    Karen Panetta

    2014-01-01

    Full Text Available Edge detection is a key step in medical image processing. It is widely used to extract features, perform segmentation, and further assist in diagnosis. A poor quality edge map can result in false alarms and misses in cancer detection algorithms. Therefore, it is necessary to have a reliable edge measure to assist in selecting the optimal edge map. Existing reference based edge measures require a ground truth edge map to evaluate the similarity between the generated edge map and the ground truth. However, the ground truth images are not available for medical images. Therefore, a nonreference edge measure is ideal for medical image processing applications. In this paper, a nonreference reconstruction based edge map evaluation (NREM is proposed. The theoretical basis is that a good edge map keeps the structure and details of the original image thus would yield a good reconstructed image. The NREM is based on comparing the similarity between the reconstructed image with the original image using this concept. The edge measure is used for selecting the optimal edge detection algorithm and optimal parameters for the algorithm. Experimental results show that the quantitative evaluations given by the edge measure have good correlations with human visual analysis.

  12. Gyrosheath near the tokamak edge

    International Nuclear Information System (INIS)

    Hazeltine, R.D.; Xiao, H.; Valanju, P.M.

    1993-03-01

    A new model for the structure of the radial electric field profile in the edge during the H-mode is proposed. Charge separation caused by the difference between electron and ion gyromotion, or more importantly in a tokamak, the banana motion (halo effect) can self-consistently produce an electric dipole moment that causes the sheared radial electric field. The calculated results based on the model are consistent with D-III D and TEXTOR experimental results

  13. Knife-edge seal for vacuum bagging

    Science.gov (United States)

    Rauschl, J. A.

    1980-01-01

    Cam actuated clamps pinch bagging material between long knife edge (mounted to clamps) and high temperature rubber cushion bonded to baseplate. No adhesive, tape, or sealing groove is needed to seal edge of bagging sheet against base plate.

  14. Environmental Dataset Gateway (EDG) REST Interface

    Data.gov (United States)

    U.S. Environmental Protection Agency — Use the Environmental Dataset Gateway (EDG) to find and access EPA's environmental resources. Many options are available for easily reusing EDG content in other...

  15. Organizing on the Edge: Appreciation and Critique

    National Research Council Canada - National Science Library

    Scott, W. R

    2006-01-01

    .... Hayes, "Power to the Edge: Command, Control in the Information Age" (2003). The author places the "edge" perspective in the broader context of organizational studies, noting both its strengths and limitations...

  16. Edge effect on weevils and spiders

    Directory of Open Access Journals (Sweden)

    R. Horváth

    2002-05-01

    Full Text Available The edge effect on weevils and spiders was tested along oak forest – meadow transects using sweep-net samples at the Síkfökút Project in Hungary. For spiders the species richness was significantly higher in the forest edge than either in the meadow or the forest interior. For weevils the species richness of the forest edge was higher than that of the meadow, but the difference was not statistically significant whereas the species richness of the forest interior was significantly lower than that of the forest edge and the meadow. The composition of the spider assemblage of the edge was more similar to the forest, while the composition of weevils in the edge was more similar to the meadow. Our results based on two invertebrate groups operating on different trophic levels suggest that there is a significant edge effect for the studied taxa resulting in higher species richness in the edge.

  17. Promoting contraceptive use among female rural-to-urban migrants in Qingdao, China: a comparative impact study of worksite-based interventions.

    Science.gov (United States)

    Decat, Peter; Zhang, Wei-Hong; Delva, Wim; Moyer, Eileen; Cheng, Yimin; Wang, Zhi-Jin; Lu, Ci-Yong; Wu, Shi-Zhong; Nadisauskiene, Ruta Jolanta; Temmerman, Marleen; Degomme, Olivier

    2012-10-01

    We conducted a comparative study in worksites to assess the impact of sexual health promoting interventions on contraceptive use among female rural-to-urban migrants. In Qingdao ten manufacturing worksites were randomly allocated to a standard package of interventions (SPI) and an intensive package of interventions (IPI). The interventions ran from July 2008 to January 2009. Cross-sectional surveys at baseline and end line assessed the sexual behaviour of young female migrants. To evaluate the impact of the interventions we assessed pre- and post-time trends. From the SPI group 721 (baseline) and 615 (end line) respondents were considered. Out of the IPI group we included 684 and 603 migrants. Among childless migrants, self-reported contraceptive use increased significantly after SPI and IPI (adjusted odds ratio [aOR] = 3.23; 95% confidence interval [CI] = 1.52-6.84; p interventions seem to have an added value if they are well targeted to specific groups.

  18. CFAR Edge Detector for Polarimetric SAR Images

    DEFF Research Database (Denmark)

    Schou, Jesper; Skriver, Henning; Nielsen, Allan Aasbjerg

    2003-01-01

    Finding the edges between different regions in an image is one of the fundamental steps of image analysis, and several edge detectors suitable for the special statistics of synthetic aperture radar (SAR) intensity images have previously been developed. In this paper, a new edge detector for polar...

  19. Energetics of highly kinked step edges

    NARCIS (Netherlands)

    Zandvliet, Henricus J.W.

    2010-01-01

    We have determined the step edge free energy, the step edge stiffness and dimensionless inverse step edge stiffness of the highly kinked < 010> oriented step on a (001) surface of a simple square lattice within the framework of a solid-on-solid model. We have found an exact expression for the step

  20. Acyclicity in edge-colored graphs

    DEFF Research Database (Denmark)

    Gutin, Gregory; Jones, Mark; Sheng, Bin

    2017-01-01

    A walk W in edge-colored graphs is called properly colored (PC) if every pair of consecutive edges in W is of different color. We introduce and study five types of PC acyclicity in edge-colored graphs such that graphs of PC acyclicity of type i is a proper superset of graphs of acyclicity of type...

  1. Use of participant focus groups to identify barriers and facilitators to worksite exercise therapy adherence in randomized controlled trials involving firefighters

    Directory of Open Access Journals (Sweden)

    Mayer JM

    2013-03-01

    Full Text Available John M Mayer,1 James L Nuzzo,1 Simon Dagenais2 1School of Physical Therapy and Rehabilitation Sciences, College of Medicine, University of South Florida, Tampa, FL, 2Palladian Health, West Seneca, NY, USA Background: Firefighters are at increased risk for back injuries, which may be mitigated through exercise therapy to increase trunk muscle endurance. However, long-term adherence to exercise therapy is generally poor, limiting its potential benefits. Focus groups can be used to identify key barriers and facilitators to exercise adherence among study participants. Objective: To explore barriers and facilitators to worksite exercise therapy adherence among firefighters to inform future randomized controlled trials (RCTs. Methods: Participants enrolled in a previous RCT requiring twice-weekly worksite exercise therapy for 24 weeks were asked to take part in moderated focus group discussions centered on eight open-ended questions related to exercise adherence. Responses were analyzed qualitatively using a social ecological framework to identify key intrapersonal, interpersonal, and institutional barriers and potential facilitators to exercise adherence. Results: A total of 27 participants were included in the four focus group discussions, representing 50% of those assigned to a worksite exercise therapy group in the previous RCT, in which only 67% of scheduled exercise therapy sessions were completed. Lack of self-motivation was cited as the key intrapersonal barrier to adherence, while lack of peer support was the key interpersonal barrier reported, and lack of time to exercise during work shifts was the key institutional barrier identified. Conclusion: Focus group discussions identified both key barriers and potential facilitators to increase worksite exercise therapy adherence among firefighters. Future studies should consider educating and reminding participants about the benefits of exercise, providing individual and group incentives based on

  2. Edge and coupled core/edge transport modelling in tokamaks

    International Nuclear Information System (INIS)

    Lodestro, L.L.; Casper, T.A.; Cohen, R.H.

    1999-01-01

    Recent advances in the theory and modelling of tokamak edge, scrape-off-layer (SOL) and divertor plasmas are described. The effects of the poloidal E x B drift on inner/outer divertor-plate asymmetries within a 1D analysis are shown to be in good agreement with experimental trends; above a critical v ExB , the model predicts transitions to supersonic flow at the inboard midplane. 2D simulations show the importance of E x B flow in the private-flux region and of ∇ B-drifts. A theory of rough plasma-facing surfaces is given, predicting modifications to the SOL plasma. The parametric dependence of detached-plasma states in slab geometry has been explored; with sufficient pumping, the location of the ionization front can be controlled; otherwise only fronts near the plate or the X-point are stable. Studies with a more accurate Monte-Carlo neutrals model and a detailed non-LTE radiation-transport code indicate various effects are important for quantitative modelling. Detailed simulations of the DIII-D core and edge are presented; impurity and plasma flow are discussed and shown to be well modelled with UEDGE. (author)

  3. Edge and coupled core-edge transport modelling in tokamaks

    International Nuclear Information System (INIS)

    Lodestro, L.L.; Casper, T.A.; Cohen, R.H.

    2001-01-01

    Recent advances in the theory and modelling of tokamak edge, scrape-off-layer (SOL) and divertor plasmas are described. The effects of the poloidal ExB drift on inner/outer divertor-plate asymmetries within a 1D analysis are shown to be in good agreement with experimental trends; above a critical v ExB, the model predicts transitions to supersonic SOL flow at the inboard midplane. 2D simulations show the importance of ExB flow in the private-flux region and of ∇ B-drifts. A theory of rough plasma-facing surfaces is given, predicting modifications to the SOL plasma. The parametric dependence of detached-plasma states in slab geometry has been explored; with sufficient pumping, the location of the ionization front can be controlled; otherwise only fronts near the plate or the X-point are stable. Studies with a more accurate Monte-Carlo neutrals model and a detailed non-LTE radiation-transport code indicate various effects are important for quantitative modelling. Detailed simulations of the DIII-D core and edge are presented; impurity and plasma flow are discussed and shown to be well modelled with UEDGE. (author)

  4. Image Edge Tracking via Ant Colony Optimization

    Science.gov (United States)

    Li, Ruowei; Wu, Hongkun; Liu, Shilong; Rahman, M. A.; Liu, Sanchi; Kwok, Ngai Ming

    2018-04-01

    A good edge plot should use continuous thin lines to describe the complete contour of the captured object. However, the detection of weak edges is a challenging task because of the associated low pixel intensities. Ant Colony Optimization (ACO) has been employed by many researchers to address this problem. The algorithm is a meta-heuristic method developed by mimicking the natural behaviour of ants. It uses iterative searches to find the optimal solution that cannot be found via traditional optimization approaches. In this work, ACO is employed to track and repair broken edges obtained via conventional Sobel edge detector to produced a result with more connected edges.

  5. K-edge densitometer (KED)

    Energy Technology Data Exchange (ETDEWEB)

    Sprinkle, J.K.; Hansen, W.J.

    1993-02-11

    In 1979, a K-edge densitometer (KED) was installed by the Safeguards Assay group from Los Alamos National Laboratory in the PNC reprocessing plant at Tokai-mura, Japan. It uses an active nondestructive assay technique, KED, to measure the plutonium concentration of the product solution. The measurement uncertainty of an assay depends on the count time chosen, but can be 0.5% or better. The computer hardware and software were upgraded in 1992. This manual describes the operation of the instrument, with an emphasis on the user interface to the software.

  6. Instant Adobe Edge Inspect starter

    CERN Document Server

    Khan, Joseph

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. This easy-to-understand Starter guide will get you up to speed with Adobe Edge Inspect quickly and with little effort.This book is for frontend web developers and designers who are developing and testing web applications targeted for mobile browsers. It's assumed that you have a basic understanding of creating web applications using HTML, CSS, and JavaScript, as well as being familiar with running web pages from local HTTP servers. Readers are a

  7. How Forest Inhomogeneities Affect the Edge Flow

    DEFF Research Database (Denmark)

    Boudreault, Louis-Étienne; Dupont, Sylvain; Bechmann, Andreas

    2016-01-01

    Most of our knowledge on forest-edge flows comes from numerical and wind-tunnel experiments where canopies are horizontally homogeneous. To investigate the impact of tree-scale heterogeneities (>1 m) on the edge-flow dynamics, the flow in an inhomogeneous forest edge on Falster island in Denmark...... is investigated using large-eddy simulation. The three-dimensional forest structure is prescribed in the model using high resolution helicopter-based lidar scans. After evaluating the simulation against wind measurements upwind and downwind of the forest leading edge, the flow dynamics are compared between...... the scanned forest and an equivalent homogeneous forest. The simulations reveal that forest inhomogeneities facilitate flow penetration into the canopy from the edge, inducing important dispersive fluxes in the edge region as a consequence of the flow spatial variability. Further downstream from the edge...

  8. Energetics of edge oxidization of graphene nanoribbons

    Science.gov (United States)

    Yasuma, Airi; Yamanaka, Ayaka; Okada, Susumu

    2018-06-01

    On the basis of the density functional theory, we studied the geometries and energetics of O atoms adsorbed on graphene edges for simulating the initial stage of the edge oxidization of graphene. Our calculations showed that oxygen atoms are preferentially adsorbed onto the graphene edges with the zigzag portion, resulting in a large adsorption energy of about 5 eV. On the other hand, the edges with armchair shape are rarely oxidized, or the oxidization causes substantial structural reconstructions, because of the stable covalent bond at the armchair edge with the triple bond nature. Furthermore, the energetics sensitively depends on the edge angles owing to the inhomogeneity of the charge density at the edge atomic sites.

  9. Haptic Edge Detection Through Shear

    Science.gov (United States)

    Platkiewicz, Jonathan; Lipson, Hod; Hayward, Vincent

    2016-03-01

    Most tactile sensors are based on the assumption that touch depends on measuring pressure. However, the pressure distribution at the surface of a tactile sensor cannot be acquired directly and must be inferred from the deformation field induced by the touched object in the sensor medium. Currently, there is no consensus as to which components of strain are most informative for tactile sensing. Here, we propose that shape-related tactile information is more suitably recovered from shear strain than normal strain. Based on a contact mechanics analysis, we demonstrate that the elastic behavior of a haptic probe provides a robust edge detection mechanism when shear strain is sensed. We used a jamming-based robot gripper as a tactile sensor to empirically validate that shear strain processing gives accurate edge information that is invariant to changes in pressure, as predicted by the contact mechanics study. This result has implications for the design of effective tactile sensors as well as for the understanding of the early somatosensory processing in mammals.

  10. Effect of an office worksite-based yoga program on heart rate variability: outcomes of a randomized controlled trial

    Science.gov (United States)

    2013-01-01

    Background Chronic work-related stress is an independent risk factor for cardiometabolic diseases and associated mortality, particularly when compounded by a sedentary work environment. The purpose of this study was to determine if an office worksite-based hatha yoga program could improve physiological stress, evaluated via heart rate variability (HRV), and associated health-related outcomes in a cohort of office workers. Methods Thirty-seven adults employed in university-based office positions were randomized upon the completion of baseline testing to an experimental or control group. The experimental group completed a 10-week yoga program prescribed three sessions per week during lunch hour (50 min per session). An experienced instructor led the sessions, which emphasized asanas (postures) and vinyasa (exercises). The primary outcome was the high frequency (HF) power component of HRV. Secondary outcomes included additional HRV parameters, musculoskeletal fitness (i.e. push-up, side-bridge, and sit & reach tests) and psychological indices (i.e. state and trait anxiety, quality of life and job satisfaction). Results All measures of HRV failed to change in the experimental group versus the control group, except that the experimental group significantly increased LF:HF (p = 0.04) and reduced pNN50 (p = 0.04) versus control, contrary to our hypotheses. Flexibility, evaluated via sit & reach test increased in the experimental group versus the control group (p yoga sessions (n = 11) to control (n = 19) yielded the same findings, except that the high adherers also reduced state anxiety (p = 0.02) and RMSSD (p = 0.05), and tended to improve the push-up test (p = 0.07) versus control. Conclusions A 10-week hatha yoga intervention delivered at the office worksite during lunch hour did not improve HF power or other HRV parameters. However, improvements in flexibility, state anxiety and musculoskeletal fitness were noted with high adherence

  11. Effect of an office worksite-based yoga program on heart rate variability: A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Chang Dennis

    2011-07-01

    Full Text Available Abstract Background Chronic work-related stress is a significant and independent risk factor for cardiovascular and metabolic diseases and associated mortality, particularly when compounded by a sedentary work environment. Heart rate variability (HRV provides an estimate of parasympathetic and sympathetic autonomic control, and can serve as a marker of physiological stress. Hatha yoga is a physically demanding practice that can help to reduce stress; however, time constraints incurred by work and family life may limit participation. The purpose of the present study is to determine if a 10-week, worksite-based yoga program delivered during lunch hour can improve resting HRV and related physical and psychological parameters in sedentary office workers. Methods and design This is a parallel-arm RCT that will compare the outcomes of participants assigned to the experimental treatment group (yoga to those assigned to a no-treatment control group. Participants randomized to the experimental condition will engage in a 10-week yoga program delivered at their place of work. The yoga sessions will be group-based, prescribed three times per week during lunch hour, and will be led by an experienced yoga instructor. The program will involve teaching beginner students safely and progressively over 10 weeks a yoga sequence that incorporates asanas (poses and postures, vinyasa (exercises, pranayama (breathing control and meditation. The primary outcome of this study is the high frequency (HF spectral power component of HRV (measured in absolute units; i.e. ms2, a measure of parasympathetic autonomic control. Secondary outcomes include additional frequency and time domains of HRV, and measures of physical functioning and psychological health status. Measures will be collected prior to and following the intervention period, and at 6 months follow-up to determine the effect of intervention withdrawal. Discussion This study will determine the effect of worksite

  12. Predicted solar cell edge radiation effects

    International Nuclear Information System (INIS)

    Gates, M.T.

    1993-01-01

    The Advanced Solar Cell Orbital Test (ASCOT) will test six types of solar cells in a high energy proton environment. During the design of the experiment a question was raised about the effects of proton radiation incident on the edge of the solar cells and whether edge radiation shielding was required. Historical geosynchronous data indicated that edge radiation damage is not detectable over the normal end of life solar cell degradation; however because the ASCOT radiation environment has a much higher and more energetic fluence of protons, considerably more edge damage is expected. A computer analysis of the problem was made by modeling the expected radiation damage at the cell edge and using a network model of small interconnected solar cells to predict degradation in the cell's electrical output. The model indicated that the deepest penetration of edge radiation was at the top of the cell near the junction where the protons have access to the cell through the low density cell/cover adhesive layer. The network model indicated that the cells could tolerate high fluences at their edge as long as there was high electrical resistance between the edge radiated region and the contact system on top of the cell. The predicted edge radiation related loss was less than 2% of maximum power for GaAs/Ge solar cells. As a result, no edge radiation protection was used for ASCOT

  13. Ethical decisions at the edge.

    Science.gov (United States)

    Gillett, Grant

    2008-05-01

    Medicine grows incrementally in its ability to treat patients and at the growing edge it poses problems about the appropriateness of treatments that are different from those where good practice conforms to widely agreed standards. The growth of access to medical knowledge and the diversity of contemporary theoretical and clinical medicine have spawned deep divisions in the profession and divergent opinions about what constitutes reasonable care. That hallmark of acceptable practice is also under pressures from the threat of litigation, a highly commercialised contemporary medical environment, patient demands based on medical journalism and the internet and the exponential growth of bio-medical technology. Patient empowerment can result in complaints arising in new and complex areas and expert opinion can often differ markedly depending on where on the medical spectrum the experts are aligned. This column lays out some broad-brush principles to assess the adequacy of medical advice in such a climate.

  14. Imaging edges of nanostructured graphene

    DEFF Research Database (Denmark)

    Kling, Jens; Cagliani, Alberto; Booth, T. J.

    Graphene, as the forefather of 2D-materials, attracts much attention due to its extraordinary properties like transparency, flexibility and outstanding high conductivity, together with a thickness of only one atom. However, graphene also possesses no band gap, which makes it unsuitable for many...... electronic applications like transistors. It has been shown theoretically that by nanostructuring pristine graphene, e.g. with regular holes, the electronic properties can be tuned and a band gap introduced. The size, distance and edge termination of these “defects” influence the adaptability....... Such nanostructuring can be done experimentally, but especially characterization at atomic level is a huge challenge. High-resolution TEM (HRTEM) is used to characterize the atomic structure of graphene. We optimized the imaging conditions used for the FEI Titan ETEM. To reduce the knock-on damage of the carbon atoms...

  15. Effect of organization-level variables on differential employee participation in 10 federal worksite health promotion programs.

    Science.gov (United States)

    Crump, C E; Earp, J A; Kozma, C M; Hertz-Picciotto, I

    1996-05-01

    Guided by a conceptual model, the authors used both qualitative data (e.g., individual interviews, focus groups) and quantitative data from an employee survey (N = 3,388) in 10 federal agencies to investigate whether organization context and implementation process affected participation in worksite health promotion and disease prevention (HPDP) activities among demographic subgroups. Overall, employees on average participated in fewer than two agency-supported health-related activities per year (17% in fitness, 40% in health risk assessment activities). Employees participated more where coworkers endorsed such programs. Minority employees and employees in lower level positions were more likely to participate in fitness activities when organizations had a more comprehensive program structure, engaged in more marketing strategies, gave time off to employees to participate, or had on-site facilities. Management support for the program was related to participation by employees who were male, white, and had upper level positions. The data supported the proposed model; also confirmed was two predicted relationships between model constructs, which provided a better understanding of differential participation by employee groups.

  16. A Focus Group Assessment to Determine Motivations, Barriers and Effectiveness of a University-Based Worksite Wellness Program

    Directory of Open Access Journals (Sweden)

    Patricia E. Hill-Mey

    2013-12-01

    Full Text Available Background: This study explores university employee perceptions and under-standing about its Worksite Health Promotion Program (WHPP. The WHPP included a Health Risk Appraisal (HRA, biometric screening, publicity for on-campus health programs and facilities, and health coaching. Methods: A qualitative design was used based on a grounded theory approach. Four 90 minutes focus groups with 6-8 participants in each were con-ducted within a two 2 week period among employees, representing faculty/participants, faculty/nonparticipants, staff/participants, and staff/nonparticipants. Responses to questions about motivations, barriers, and perceived health benefits that impacted participation in the WHPP were digitally recorded, transcribed and coded for themes. Results: Incentives effectively motivated participation. Biometric screening had the largest impact on behavior change, followed by the information learned from the HRA. However, despite two-thirds of the employees participating in the program, lack of a full understanding of WHPP benefits and services lowered participation in follow-up services and supplemental pro-grams. Conclusions: Biometric screening and HRAs effectively motivate program participation. Communication of benefits and services are important when providing WHPPs.

  17. A comprehensive worksite wellness program in Austin, Texas: partnership between Steps to a Healthier Austin and Capital Metropolitan Transportation Authority.

    Science.gov (United States)

    Davis, Lynn; Loyo, Karina; Glowka, Aerie; Schwertfeger, Rick; Danielson, Lisa; Brea, Cecily; Easton, Alyssa; Griffin-Blake, Shannon

    2009-04-01

    In 2003, Steps to a Healthier Austin was funded by the Centers for Disease Control and Prevention to implement chronic disease prevention and health promotion activities. We report Steps to a Healthier Austin's partnership with Health & Lifestyles Corporate Wellness, Inc (Health & Lifestyles), to provide a worksite wellness program for Capital Metropolitan Transportation Authority (Capital Metro), Austin's local transit authority. Capital Metro employs 1,282 people. In 2003, Health & Lifestyles was hired to help promote healthier lifestyles, increase employee morale, and combat rising health care costs and absenteeism rates. Health & Lifestyles provided consultations with wellness coaches and personal trainers, a 24-hour company fitness center, personalized health assessments, and preventive screenings. The program expanded to include healthier food options, cash incentives, health newsletters, workshops, dietary counseling, smoking cessation programs, and a second fitness center. Participants in the wellness program reported improvements in physical activity, healthy food consumption, weight loss, and blood pressure. Capital Metro's total health care costs increased by progressively smaller rates from 2003 to 2006 and then decreased from 2006 to 2007. Absenteeism has decreased by approximately 25% since the implementation of the program, and the overall return on the investment was calculated to be 2.43. Since the implementation of the wellness program in 2003, Capital Metro has seen a reduction in costs associated with employee health care and absenteeism.

  18. Determining Barriers and Facilitators Associated With Willingness to Use a Personal Health Information Management System to Support Worksite Wellness Programs.

    Science.gov (United States)

    Neyens, David M; Childers, Ashley Kay

    2017-07-01

    To determine the barriers and facilitators associated with willingness to use personal health information management (PHIM) systems to support an existing worksite wellness program (WWP). The study design involved a Web-based survey. The study setting was a regional hospital. Hospital employees comprised the study subjects. Willingness, barriers, and facilitators associated with PHIM were measured. Bivariate logit models were used to model two binary dependent variables. One model predicted the likelihood of believing PHIM systems would positively affect overall health and willingness to use. Another predicted the likelihood of worrying about online security and not believing PHIM systems would benefit health goals. Based on 333 responses, believing PHIM systems would positively affect health was highly associated with willingness to use PHIM systems (p < .01). Those comfortable online were 7.22 times more willing to use PHIM systems. Participants in exercise-based components of WWPs were 3.03 times more likely to be willing to use PHIM systems. Those who worried about online security were 5.03 times more likely to believe PHIM systems would not help obtain health goals. Comfort with personal health information online and exercise-based WWP experience was associated with willingness to use PHIM systems. However, nutrition-based WWPs did not have similar effects. Implementation barriers relate to technology anxiety and trust in security, as well as experience with specific WWP activities. Identifying differences between WWP components and addressing technology concerns before implementation of PHIM systems into WWPs may facilitate improved adoption and usage.

  19. Health Behaviors and Overweight in Nursing Home Employees: Contribution of Workplace Stressors and Implications for Worksite Health Promotion.

    Science.gov (United States)

    Miranda, Helena; Gore, Rebecca J; Boyer, Jon; Nobrega, Suzanne; Punnett, Laura

    2015-01-01

    Many worksite health promotion programs ignore the potential influence of working conditions on unhealthy behaviors. A study of nursing home employees (56% nursing aides) utilized a standardized questionnaire. We analyzed the cross-sectional associations between workplace stressors and obesity, cigarette smoking, and physical inactivity. Of 1506 respondents, 20% reported exposure to three or more workplace stressors (physical or organizational), such as lifting heavy loads, low decision latitude, low coworker support, regular night work, and physical assault. For each outcome, the prevalence ratio was between 1.5 and 2 for respondents with four or five job stressors. Individuals under age 40 had stronger associations between workplace stressors and smoking and obesity. Workplace stressors were strongly associated with smoking, obesity, and physical inactivity, even among the lowest-status workers. Current working conditions affected younger workers more than older workers. Although this study is cross-sectional, it has other strengths, including the broad range of work stressors studied. Strenuous physical work and psychosocial strain are common among low-wage workers such as nursing home aides. Workplace health promotion programs may be more effective if they include measures to reduce stressful work environment features, so that working conditions support rather than interfere with employee health.

  20. Magnetohydrodynamic stability of tokamak edge plasmas

    International Nuclear Information System (INIS)

    Connor, J.W.; Hastie, R.J.; Wilson, H.R.; Miller, R.L.

    1998-01-01

    A new formalism for analyzing the magnetohydrodynamic stability of a limiter tokamak edge plasma is developed. Two radially localized, high toroidal mode number n instabilities are studied in detail: a peeling mode and an edge ballooning mode. The peeling mode, driven by edge current density and stabilized by edge pressure gradient, has features which are consistent with several properties of tokamak behavior in the high confinement open-quotes Hclose quotes-mode of operation, and edge localized modes (or ELMs) in particular. The edge ballooning mode, driven by the pressure gradient, is identified; this penetrates ∼n 1/3 rational surfaces into the plasma (rather than ∼n 1/2 , expected from conventional ballooning mode theory). Furthermore, there exists a coupling between these two modes and this coupling provides a picture of the ELM cycle

  1. Edge and line detection of complicated and blurred objects

    OpenAIRE

    Haugsdal, Kari

    2010-01-01

    This report deals with edge and line detection in pictures with complicated and/or blurred objects. It explores the alternatives available, in edge detection, edge linking and object recognition. Choice of methods are the Canny edge detection and Local edge search processing combined with regional edge search processing in the form of polygon approximation.

  2. Study of airfoil trailing edge bluntness noise

    DEFF Research Database (Denmark)

    Zhu, Wei Jun; Shen, Wen Zhong; Sørensen, Jens Nørkær

    2010-01-01

    This paper deals with airfoil trailing edge noise with special focus on airfoils with blunt trailing edges. Two methods are employed to calculate airfoil noise: The flow/acoustic splitting method and the semi-empirical method. The flow/acoustic splitting method is derived from compressible Navier...... design or optimization. Calculations from both methods are compared with exist experiments. The airfoil blunt noise is found as a function of trailing edge bluntness, Reynolds number, angle of attack, etc....

  3. Selective Electroless Silver Deposition on Graphene Edges

    DEFF Research Database (Denmark)

    Durhuus, D.; Larsen, M. V.; Andryieuski, Andrei

    2015-01-01

    We demonstrate a method of electroless selective silver deposition on graphene edges or between graphene islands without covering the surface of graphene. Modifications of the deposition recipe allow for decoration of graphene edges with silver nanoparticles or filling holes in damaged graphene...... on silica substrate and thus potentially restoring electric connectivity with minimal influence on the overall graphene electrical and optical properties. The presented technique could find applications in graphene based transparent conductors as well as selective edge functionalization and can be extended...

  4. Discursive Maps at the Edge of Chaos

    Science.gov (United States)

    2017-05-25

    Discursive Maps at the Edge of Chaos A Monograph by Major Mathieu Primeau Canadian Army, Royal Canadian Engineer School of Advanced Military...Master’s Thesis 3. DATES COVERED (From - To) JUN 2016 – MAY 2017 4. TITLE AND SUBTITLE Discursive Maps at the Edge of Chaos 5a. CONTRACT NUMBER 5b...meaning of boundaries and polarize conflict towards violence. The edge of chaos is the fine line between disorder and coherence. Discursive maps

  5. Edge effect on weevils and spiders

    OpenAIRE

    Horváth, R.; Magura, T.; Péter, G.; Tóthmérész, B.

    2002-01-01

    The edge effect on weevils and spiders was tested along oak forest – meadow transects using sweep-net samples at the Síkfökút Project in Hungary. For spiders the species richness was significantly higher in the forest edge than either in the meadow or the forest interior. For weevils the species richness of the forest edge was higher than that of the meadow, but the difference was not statistically significant whereas the species richness of the forest...

  6. Moveable Leading Edge Device for a Wing

    Science.gov (United States)

    Pitt, Dale M. (Inventor); Eckstein, Nicholas Stephen (Inventor)

    2013-01-01

    A method and apparatus for managing a flight control surface system. A leading edge section on a wing of an aircraft is extended into a deployed position. A deformable section connects the leading edge section to a trailing section. The deformable section changes from a deformed shape to an original shape when the leading edge section is moved into the deployed position. The leading edge section on the wing is moved from the deployed position to an undeployed position. The deformable section changes to the deformed shape inside of the wing.

  7. Visible imaging of edge turbulence in NSTX

    International Nuclear Information System (INIS)

    Zweben, S.; Maqueda, R.; Hill, K.; Johnson, D.

    2000-01-01

    Edge plasma turbulence in tokamaks and stellarators is believed to cause the radical heat and particle flux across the separatrix and into the scrape-off-layers of these devices. This paper describes initial measurements of 2-D space-time structure of the edge density turbulence made using a visible imaging diagnostic in the National Spherical Torus Experiment (NSTX). The structure of the edge turbulence is most clearly visible using a method of gas puff imaging to locally illuminate the edge density turbulence

  8. IMAGE ANALYSIS BASED ON EDGE DETECTION TECHNIQUES

    Institute of Scientific and Technical Information of China (English)

    纳瑟; 刘重庆

    2002-01-01

    A method that incorporates edge detection technique, Markov Random field (MRF), watershed segmentation and merging techniques was presented for performing image segmentation and edge detection tasks. It first applies edge detection technique to obtain a Difference In Strength (DIS) map. An initial segmented result is obtained based on K-means clustering technique and the minimum distance. Then the region process is modeled by MRF to obtain an image that contains different intensity regions. The gradient values are calculated and then the watershed technique is used. DIS calculation is used for each pixel to define all the edges (weak or strong) in the image. The DIS map is obtained. This help as priority knowledge to know the possibility of the region segmentation by the next step (MRF), which gives an image that has all the edges and regions information. In MRF model,gray level l, at pixel location i, in an image X, depends on the gray levels of neighboring pixels. The segmentation results are improved by using watershed algorithm. After all pixels of the segmented regions are processed, a map of primitive region with edges is generated. The edge map is obtained using a merge process based on averaged intensity mean values. A common edge detectors that work on (MRF) segmented image are used and the results are compared. The segmentation and edge detection result is one closed boundary per actual region in the image.

  9. Object detection using categorised 3D edges

    DEFF Research Database (Denmark)

    Kiforenko, Lilita; Buch, Anders Glent; Bodenhagen, Leon

    2015-01-01

    is made possible by the explicit use of edge categories in the feature descriptor. We quantitatively compare our approach with the state-of-the-art template based Linemod method, which also provides an effective way of dealing with texture-less objects, tests were performed on our own object dataset. Our...... categorisation algorithm for describing objects in terms of its different edge types. Relying on edge information allow our system to deal with objects with little or no texture or surface variation. We show that edge categorisation improves matching performance due to the higher level of discrimination, which...

  10. Visible imaging of edge turbulence in NSTX

    International Nuclear Information System (INIS)

    S. Zweben; R. Maqueda; K. Hill; D. Johnson; S. Kaye; H. Kugel; F. Levinton; R. Maingi; L. Roquemore; S. Sabbagh; G. Wurden

    2000-01-01

    Edge plasma turbulence in tokamaks and stellarators is believed to cause the radial heat and particle flux across the separatrix and into the scrape-off-layers of these devices. This paper describes initial measurements of 2-D space-time structure of the edge density turbulence made using a visible imaging diagnostic in the National Spherical Torus Experiment (NSTX). The structure of the edge turbulence is most clearly visible using a method of ''gas puff imaging'' to locally illuminate the edge density turbulence

  11. Edge passivation induced single-edge ferromagnetism of zigzag MoS_2 nanoribbons

    International Nuclear Information System (INIS)

    Wang, Rui; Sun, Hui; Ma, Ben; Hu, Jingguo; Pan, Jing

    2017-01-01

    We performed density functional theory study on electronic structure, magnetic properties and stability of zigzag MoS_2 nanoribbons (ZMoS_2NRs) with and without oxygen (O) passivation. The bare ZMoS_2NRs are magnetic metal with ferromagnetic edge states, edge passivation decreases their magnetism because of the decrease of edge unsaturated electrons. Obviously, the electronic structure and magnetic properties of ZMoS_2NRs greatly depend on edge states. When both edges are passivated by O atoms, ZMoS_2NRs are nonmagnetic metals. When either edge is passivated by O atoms, the systems exhibit single-edge ferromagnetism and magnetism concentrates on the non-passivated edge. Edge passivation can not only tune the magnetism of ZMoS_2NRs, but also enhance their stability by eliminating dangling bonds. These interesting findings on ZMoS_2NRs may open the possibility of their application in nanodevices and spintronics. - Highlights: • Edge passivation for tuning magnetism of zigzag MoS_2 nanoribbons (ZMoS_2NRs) is proposed. • Edge passivation can tune ZMoS_2NRs from nonmagnetic metal to ferromagnetic metal. • When either edge is passivated, the systems exhibit single-edge ferromagnetic states. • These findings may inspire great interest in the community of ZMoS_2NRs and motivate numerous experimental researches.

  12. Saturn's Rings Edge-on

    Science.gov (United States)

    1995-01-01

    In one of nature's most dramatic examples of 'now-you see-them, now-you-don't', NASA's Hubble Space Telescope captured Saturn on May 22, 1995 as the planet's magnificent ring system turned edge-on. This ring-plane crossing occurs approximately every 15 years when the Earth passes through Saturn's ring plane.For comparison, the top picture was taken by Hubble on December 1, 1994 and shows the rings in a more familiar configuration for Earth observers.The bottom picture was taken shortly before the ring plane crossing. The rings do not disappear completely because the edge of the rings reflects sunlight. The dark band across the middle of Saturn is the shadow of the rings cast on the planet (the Sun is almost 3 degrees above the ring plane.) The bright stripe directly above the ring shadow is caused by sunlight reflected off the rings onto Saturn's atmosphere. Two of Saturn's icy moons are visible as tiny starlike objects in or near the ring plane. They are, from left to right, Tethys (slightly above the ring plane) and Dione.This observation will be used to determine the time of ring-plane crossing and the thickness of the main rings and to search for as yet undiscovered satellites. Knowledge of the exact time of ring-plane crossing will lead to an improved determination of the rate at which Saturn 'wobbles' about its axis (polar precession).Both pictures were taken with Hubble's Wide Field Planetary Camera 2. The top image was taken in visible light. Saturn's disk appears different in the bottom image because a narrowband filter (which only lets through light that is not absorbed by methane gas in Saturn's atmosphere) was used to reduce the bright glare of the planet. Though Saturn is approximately 900 million miles away, Hubble can see details as small as 450 miles across.The Wide Field/Planetary Camera 2 was developed by the Jet Propulsion Laboratory and managed by the Goddard Spaced Flight Center for NASA's Office of Space Science.This image and other images and

  13. Competitive edge through technological innovation

    International Nuclear Information System (INIS)

    Gottlieb, M.

    1997-01-01

    The vital role of advanced technology in natural gas cost reduction has been described. Among advanced technologies, seismic, drilling and fracturing technologies have been singled out as being the most important. Access to new supply frontiers (aided by the application of advanced technology), and more effective business strategies were considered as the other most influential factors in efficiently exploiting oil and gas resources. In view of predictions of substantially increased demand, advanced technology is poised to be even more important in the future. With this as background, an examination of the level of investment for the development of advanced technology revealed that energy industry R and D expenditures were lowest among industries in the U.S. (only 0.7 per cent of sales). It was concluded that notwithstanding industry's ability to improve output per R and D dollar invested, the achievement of the necessary technological advancements is a strategic imperative for both the industry and the U.S. as a whole. As far as the industry is concerned, its ability to maintain a competitive edge over competing energy forms, will be determined largely on the basis of its willingness to invest in future advanced technology development. 2 refs., 14 figs

  14. CMS kinematic edge from sbottoms

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Peisi; Wagner, Carlos E. M.

    2015-01-01

    We present two scenarios in the Minimal Supersymmetric Extension of the Standard Model (MSSM) that can lead to an explanation of the excess in the invariant mass distribution of two opposite charged, same flavor leptons, and the corresponding edge at an energy of about 78 GeV, recently reported by the CMS Collaboration. In both scenarios, sbottoms are pair produced, and decay to neutralinos and a b-jet. The heavier neutralinos further decay to a pair of leptons and the lightest neutralino through on-shell sleptons or off-shell neutral gauge bosons. These scenarios are consistent with the current limits on the sbottoms, neutralinos, and sleptons. Assuming that the lightest neutralino is stable we discuss the predicted relic density as well as the implications for darkmatter direct detection. We show that consistency between the predicted and the measured value of the muon anomalous magnetic moment may be obtained in both scenarios. Finally, we define the signatures of these models that may be tested at the 13 TeV run of the LHC

  15. LES tests on airfoil trailing edge serration

    DEFF Research Database (Denmark)

    Zhu, Wei Jun; Shen, Wen Zhong

    2016-01-01

    In the present study, a large number of acoustic simulations are carried out for a low noise airfoil with different Trailing Edge Serrations (TES). The Ffowcs Williams-Hawkings (FWH) acoustic analogy is used for noise prediction at trailing edge. The acoustic solver is running on the platform...

  16. Automatic Edging and Trimming of Hardwood Lumber

    Science.gov (United States)

    D. Earl Kline; Eugene M. Wengert; Philip A. Araman

    1990-01-01

    Studies have shown that there is a potential to increase hardwood lumber value by more than 20 percent through optimum edging and trimming. Even a small portion of this percentage can boost the profitability of hardwood lumber manufacturers substantially. The objective of this research project is to develop an automated system which would assist in correct edging and...

  17. Development of planar detectors with active edge

    International Nuclear Information System (INIS)

    Povoli, M.; Bagolini, A.; Boscardin, M.; Dalla Betta, G.-F.; Giacomini, G.; Vianello, E.; Zorzi, N.

    2011-01-01

    We report on the first batch of planar active edge sensors fabricated at Fondazione Bruno Kessler (Trento, Italy) on the way to the development of full 3D detectors with active edges. The main design and technological aspects are reported, along with selected results from the electrical characterization of detectors and test structures.

  18. Development of planar detectors with active edge

    Energy Technology Data Exchange (ETDEWEB)

    Povoli, M., E-mail: povoli@disi.unitn.it [Dipartimento di Ingegneria e Scienza dell' Informazione, Universita di Trento, Via Sommarive, 14, I-38123 Povo di Trento (Italy); INFN, Sezione di Padova (Gruppo Collegato di Trento) (Italy); Bagolini, A.; Boscardin, M. [Fondazione Bruno Kessler, Centro per i Materiali e i Microsistemi (FBK-CMM), Via Sommarive, 18, I-38123 Povo di Trento (Italy); Dalla Betta, G.-F. [Dipartimento di Ingegneria e Scienza dell' Informazione, Universita di Trento, Via Sommarive, 14, I-38123 Povo di Trento (Italy); INFN, Sezione di Padova (Gruppo Collegato di Trento) (Italy); Giacomini, G.; Vianello, E.; Zorzi, N. [Fondazione Bruno Kessler, Centro per i Materiali e i Microsistemi (FBK-CMM), Via Sommarive, 18, I-38123 Povo di Trento (Italy)

    2011-12-01

    We report on the first batch of planar active edge sensors fabricated at Fondazione Bruno Kessler (Trento, Italy) on the way to the development of full 3D detectors with active edges. The main design and technological aspects are reported, along with selected results from the electrical characterization of detectors and test structures.

  19. Annotated Bibliography of EDGE2D Use

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Strachan and G. Corrigan

    2005-06-24

    This annotated bibliography is intended to help EDGE2D users, and particularly new users, find existing published literature that has used EDGE2D. Our idea is that a person can find existing studies which may relate to his intended use, as well as gain ideas about other possible applications by scanning the attached tables.

  20. Annotated Bibliography of EDGE2D Use

    International Nuclear Information System (INIS)

    Strachan, J.D.; Corrigan, G.

    2005-01-01

    This annotated bibliography is intended to help EDGE2D users, and particularly new users, find existing published literature that has used EDGE2D. Our idea is that a person can find existing studies which may relate to his intended use, as well as gain ideas about other possible applications by scanning the attached tables

  1. Magnetism of zigzag edge phosphorene nanoribbons

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Zhili, E-mail: zlzhu@zzu.edu.cn, E-mail: jiayu@zzu.edu.cn; Li, Chong; Yu, Weiyang; Chang, Dahu; Sun, Qiang; Jia, Yu, E-mail: zlzhu@zzu.edu.cn, E-mail: jiayu@zzu.edu.cn [International Joint Research Laboratory for Quantum Functional Materials of Henan, and School of Physics and Engineering, Zhengzhou University, Zhengzhou 450001 (China)

    2014-09-15

    We have investigated, by means of ab initio calculations, the electronic and magnetic structures of zigzag edge phosphorene nanoribbons (ZPNRs) with various widths. The stable magnetic state was found in pristine ZPNRs by allowing the systems to be spin-polarized. The ground state of pristine ZPNRs prefers ferromagnetic order in the same edge but antiferromagnetic order between two opposite edges. The magnetism arises from the dangling bond states as well as edge localized π-orbital states. The presence of a dangling bond is crucial to the formation of the magnetism of ZPNRs. The hydrogenated ZPNRs get nonmagnetic semiconductors with a direct band gap. While, the O-saturated ZPNRs show magnetic ground states due to the weak P-O bond in the ribbon plane between the p{sub z}-orbitals of the edge O and P atoms.

  2. Edge separation using diffraction anomalous fine structure

    International Nuclear Information System (INIS)

    Ravel, B.; Bouldin, C.E.; Renevier, H.; Hodeau, J.L.; Berar, J.F.

    1999-01-01

    We exploit the crystallographic sensitivity of the Diffraction Anomalous Fine-Structure (DAFS) measurement to separate the fine structure contributions of different atomic species with closely spaced resonant energies. In BaTiO 3 the Ti K edge and Ba Lm edges are separated by 281 eV, or about 8.2 Angstrom -1 ), thus severely limiting the information content of the Ti K edge signal. Using the site selectivity of DAFS we can separate the two fine structure spectra using an iterative Kramers-Kronig method, thus extending the range of the Ti K edge spectrum. This technique has application to many rare earth/transition metal compounds, including many magnetic materials of technological significance for which K and L edges overlap in energy. (au)

  3. The design of a real-time formative evaluation of the implementation process of lifestyle interventions at two worksites using a 7-step strategy (BRAVO@Work).

    Science.gov (United States)

    Wierenga, Debbie; Engbers, Luuk H; van Empelen, Pepijn; Hildebrandt, Vincent H; van Mechelen, Willem

    2012-08-07

    Worksite health promotion programs (WHPPs) offer an attractive opportunity to improve the lifestyle of employees. Nevertheless, broad scale and successful implementation of WHPPs in daily practice often fails. In the present study, called BRAVO@Work, a 7-step implementation strategy was used to develop, implement and embed a WHPP in two different worksites with a focus on multiple lifestyle interventions.This article describes the design and framework for the formative evaluation of this 7-step strategy under real-time conditions by an embedded scientist with the purpose to gain insight into whether this this 7-step strategy is a useful and effective implementation strategy. Furthermore, we aim to gain insight into factors that either facilitate or hamper the implementation process, the quality of the implemented lifestyle interventions and the degree of adoption, implementation and continuation of these interventions. This study is a formative evaluation within two different worksites with an embedded scientist on site to continuously monitor the implementation process. Each worksite (i.e. a University of Applied Sciences and an Academic Hospital) will assign a participating faculty or a department, to implement a WHPP focusing on lifestyle interventions using the 7-step strategy. The primary focus will be to describe the natural course of development, implementation and maintenance of a WHPP by studying [a] the use and adherence to the 7-step strategy, [b] barriers and facilitators that influence the natural course of adoption, implementation and maintenance, and [c] the implementation process of the lifestyle interventions. All data will be collected using qualitative (i.e. real-time monitoring and semi-structured interviews) and quantitative methods (i.e. process evaluation questionnaires) applying data triangulation. Except for the real-time monitoring, the data collection will take place at baseline and after 6, 12 and 18 months. This is one of the few

  4. The design of a real-time formative evaluation of the implementation process of lifestyle interventions at two worksites using a 7-step strategy (BRAVO@Work

    Directory of Open Access Journals (Sweden)

    Wierenga Debbie

    2012-08-01

    Full Text Available Abstract Background Worksite health promotion programs (WHPPs offer an attractive opportunity to improve the lifestyle of employees. Nevertheless, broad scale and successful implementation of WHPPs in daily practice often fails. In the present study, called BRAVO@Work, a 7-step implementation strategy was used to develop, implement and embed a WHPP in two different worksites with a focus on multiple lifestyle interventions. This article describes the design and framework for the formative evaluation of this 7-step strategy under real-time conditions by an embedded scientist with the purpose to gain insight into whether this this 7-step strategy is a useful and effective implementation strategy. Furthermore, we aim to gain insight into factors that either facilitate or hamper the implementation process, the quality of the implemented lifestyle interventions and the degree of adoption, implementation and continuation of these interventions. Methods and design This study is a formative evaluation within two different worksites with an embedded scientist on site to continuously monitor the implementation process. Each worksite (i.e. a University of Applied Sciences and an Academic Hospital will assign a participating faculty or a department, to implement a WHPP focusing on lifestyle interventions using the 7-step strategy. The primary focus will be to describe the natural course of development, implementation and maintenance of a WHPP by studying [a] the use and adherence to the 7-step strategy, [b] barriers and facilitators that influence the natural course of adoption, implementation and maintenance, and [c] the implementation process of the lifestyle interventions. All data will be collected using qualitative (i.e. real-time monitoring and semi-structured interviews and quantitative methods (i.e. process evaluation questionnaires applying data triangulation. Except for the real-time monitoring, the data collection will take place at baseline and

  5. A multi-component stair climbing promotional campaign targeting calorific expenditure for worksites; a quasi-experimental study testing effects on behaviour, attitude and intention

    Directory of Open Access Journals (Sweden)

    Eves Frank F

    2012-06-01

    Full Text Available Abstract Background Accumulation of lifestyle physical activity is a current aim of health promotion, with increased stair climbing one public health target. While the workplace provides an opportunity for regular stair climbing, evidence for effectiveness of point-of-choice interventions is equivocal. This paper reports a new approach to worksite interventions, aimed at changing attitudes and, hence, behaviour. Methods Pre-testing of calorific expenditure messages used structured interviews with members of the public (n = 300. Effects of multi-component campaigns on stair climbing were tested with quasi-experimental, interrupted time-series designs. In one worksite, a main campaign poster outlining the amount of calorific expenditure obtainable from stair climbing and a conventional point-of-choice prompt were used (Poster alone site. In a second worksite, additional messages in the stairwell about calorific expenditure reinforced the main campaign (Poster + Stairwell messages site. The outcome variables were automated observations of stair and lift ascent (28,854 and descent (29,352 at baseline and for three weeks after the intervention was installed. Post-intervention questionnaires for employees at the worksites assessed responses to the campaign (n = 253. Analyses employed Analysis of Variance with follow-up Bonferroni t-tests (message pre-testing, logistic regression of stair ascent and descent (campaign testing, and Bonferroni t-tests and multiple regression (follow-up questionnaire. Results Pre-testing of messages based on calorific expenditure suggested they could motivate stair climbing if believed. The new campaign increased stair climbing, with greater effects at the Poster + Stairwell messages site (OR = 1.52, 95% CI = 1.40-1.66 than Posters alone (OR = 1.24, 95% CI = 1.15-1.34. Follow-up revealed higher agreement with two statements about calorific outcomes of stair climbing in the site where they

  6. Prevalence of work-site injuries and relationship between obesity and injury among U.S. workers: NHIS 2004-2012.

    Science.gov (United States)

    Gu, Ja K; Charles, Luenda E; Andrew, Michael E; Ma, Claudia C; Hartley, Tara A; Violanti, John M; Burchfiel, Cecil M

    2016-09-01

    Studies have reported associations between obesity and injury in a single occupation or industry. Our study estimated the prevalence of work-site injuries and investigated the association between obesity and work-site injury in a nationally representative sample of U.S. workers. Self-reported weight, height, and injuries within the previous three months were collected annually for U.S. workers in the National Health Interview Survey (NHIS) from 2004-2012. Participants were categorized as normal weight (BMI: 18.5-24.9kg/m(2)), overweight (BMI: 25.0-29.9), obese I (BMI: 30.0-34.9), and obese II (BMI: 35+). The prevalence of injury and prevalence ratios from fitted logistic regression models was used to assess relationships between obesity and injury after adjusting for covariates. Sampling weights were incorporated using SUDAAN software. During the 9-year study period from 2004 to 2012, 1120 workers (78 workers per 10,000) experienced a work-related injury during the previous three months. The anatomical sites with the highest prevalence of injury were the back (14.3/10,000±1.2), fingers (11.5±1.3), and knees (7.1±0.8). The most common types of injuries were sprains/strains/twists (41.5% of all injuries), cuts (20.0%), and fractures (11.8%). Compared to normal weight workers, overweight and obese workers were more likely to experience work-site injuries [overweight: PR=1.25 (95% CI=1.04-1.52); obese I: 1.41 (1.14-1.74); obese II: 1.68 (1.32-2.14)]. These injuries were more likely to affect the lower extremities [overweight: PR=1.48, (95% CI=1.03-2.13); obese I: 1.70 (1.13-2.55); obese II: 2.91 (1.91-4.41)] and were more likely to be due to sprains/strains/twists [overweight: PR=1.73 (95% CI=1.29-2.31); obese I: PR=2.24 (1.64-3.06); obese II: PR=2.95 (2.04-4.26)]. Among NHIS participants, overweight and obese workers were 25% to 68% more likely to experience injuries than normal weight workers. Weight reduction policies and management programs may be effectively

  7. Dietary and physical activity behaviors related to obesity-specific quality of life and work productivity: baseline results from a worksite trial

    OpenAIRE

    Cash, Stephanie Whisnant; Beresford, Shirley A.A; Henderson, Jo Ann; McTiernan, Anne; Xiao, Liren; Wang, C.Y.; Patrick, Donald L.

    2011-01-01

    Obesity is associated with impaired health-related quality of life (QoL) and reduced productivity; less is known about the effect of dietary factors. This study investigated how dietary behaviors, physical activity, and Body Mass Index (BMI) relate to weight-specific QoL and work productivity. The study was conducted in 31 small blue-collar and service industry worksites in Seattle. Participants were 747 employees (33.5% non-White). Measures included self-reported servings of fruits and veget...

  8. Nutrition Standards for Food Service Guidelines for Foods Served or Sold in Municipal Government Buildings or Worksites, United States, 2014.

    Science.gov (United States)

    Onufrak, Stephen J; Zaganjor, Hatidza; Moore, Latetia V; Carlson, Susan; Kimmons, Joel; Galuska, Deborah

    2016-12-22

    The Institute of Medicine and Centers for Disease Control and Prevention have recommended that government agencies use nutrition standards for foods and beverages sold and provided at their facilities. In this study, we examine written nutrition standards for foods sold or served in local government buildings or worksites among US municipalities. We used data from a 2014 national survey of 1,945 municipal governments serving populations of 1,000 or more to assess the presence of written nutrition standards, the food groups or nutrients addressed by standards, and the populations served by facilities where standards are applied. The prevalence of standards was estimated by municipality population size, rural-urban status, census region, poverty prevalence, education level, and racial/ethnic composition. Overall, 3.2% of US municipalities reported nutrition standards with greater prevalence observed among large municipalities (12.8% of municipalities with ≥50,000 people vs 2.2% of municipalities with <2,500 people, P < .001). Prevalence differed by region, and standards were most common in the West (6.6%) and least common in the Midwest (2.0%, P = .003).The most common nutrition topics addressed in standards were offering low-calorie beverages, fruits and vegetables, and free drinking water. Most standards applied to facilities serving government employees (67%) or the general public (66%), with fewer serving institutionalized populations (23%). Few municipal governments reported having written nutrition standards for foods and beverages sold in their facilities in 2014. Implementing nutrition standards for foods sold or served by local governments is a strategy for increasing access to healthier foods and beverages among municipal employees and local residents.

  9. Decrease in musculoskeletal pain after 4 and 12 months of an aerobic exercise intervention: a worksite RCT among cleaners.

    Science.gov (United States)

    Korshøj, Mette; Birk Jørgensen, Marie; Lidegaard, Mark; Mortensen, Ole Steen; Krustrup, Peter; Holtermann, Andreas; Søgaard, Karen

    2017-07-01

    Prevalence of musculoskeletal pain is high in jobs with high physical work demands. An aerobic exercise intervention targeting cardiovascular health was evaluated for its long term side effects on musculoskeletal pain. The objective was to investigate if aerobic exercise affects level of musculoskeletal pain from baseline to 4- and 12-months follow-up. One-hundred-and-sixteen cleaners aged 18-65 years were cluster-randomized. The aerobic exercise group ( n = 57) received worksite aerobic exercise (30 min twice a week) and the reference group ( n = 59) lectures in health promotion. Strata were formed according to closest manager (total 11 strata); clusters were set within strata (total 40 clusters, 20 in each group). Musculoskeletal pain data from eight body regions was collected at baseline and after 4- and 12-months follow-up. The participants stated highest pain in the last month on a scale from 0, stating no pain, up to 10, stating worst possible pain. A repeated-measure 2 × 2 multi-adjusted mixed-models design was applied to compare the between-groups differences in an intention to treat analysis. Participants were entered as a random effect nested in clusters to account for the cluster-based randomization. Clinically significant reductions (>30%, f  2 > 0.25) in the aerobic exercise group, compared to the reference group, in pain intensity in neck, shoulders, arms/wrists were found at 12-months follow-up, and a tendency ( p = 0.07, f  2 = 0.18) to an increase for the knees. At 4-months follow-up the only significant between-group change was an increase in hip pain. This study indicates that aerobic exercise reduces musculoskeletal pain in the upper extremities, but as an unintended side effect may increase pain in the lower extremities. Aerobic exercise interventions among workers standing or walking in the majority of the working hours should tailor exercise to only maintain the positive effect on musculoskeletal pain.

  10. Healthy Team Healthy U: A Prospective Validation of an Evidence-based Worksite Health Promotion and Wellness Platform

    Directory of Open Access Journals (Sweden)

    Linn eGoldberg

    2015-08-01

    Full Text Available Objective: To evaluate the effects of a research tested, team-based health promotion and wellness program combined with digital technologies and implemented in a diverse worksite setting among hospital, clinic and university employees. Methods: A prospective cohort study of employees completing biometrics and questionnaires before and after the initial 12-session wellness program and its 12-session booster, one year later. Results: After both the initial intervention and booster, blood pressure and weight were reduced, with greater reductions among employees with pre-hypertension and hypertension and those with a BMI > 25. After both the initial intervention and booster, there was a significant increase in, 1 daily intake of fruit and vegetable servings; 2 days per week of > 30 minutes of exercise; 3 days per week of strength training and 4 levels of moderately vigorous and vigorous daily physical activity. Self-reported indices of depression and work related stress were reduced, while participants reported increased happiness after the initial program and booster. Post booster, average sleep quality and sleep duration increased, among higher risk employees reporting < 6 hours of daily sleep. Employees reported receiving encouragement from co-workers to engage in healthful activities, exercising with fellow employees more, and indicated they would recommend the program to co-workers. Longitudinal analysis revealed the durability of the initial intervention outcomes with further beneficial effects after the booster. Conclusion: A research-tested, comprehensive team-based health promotion and wellness program, combined with digital technologies, positively impacted employee health behaviors, mood, sleep, worker cohesion and biometrics among a diverse multi-site workforce. Positive program effects were durable, with enhanced results after the booster.

  11. Worksite Influences on Obesogenic Behaviors in Low-Wage Workers in St Louis, Missouri, 2013–2014

    Science.gov (United States)

    Pizzorno, Galen; Kinghorn, Anna M.; Evanoff, Bradley A.

    2015-01-01

    Introduction More than one-third of US adults are obese. Workplace programs to reduce obesity and improve overall health are not available or accessible to all workers, particularly low-wage workers among whom obesity is more prevalent. The goal of the study was to identify modifiable workplace factors and behaviors associated with diet and exercise to inform future workplace interventions to improve health. Methods We distributed paper and online surveys to 2 groups of low-wage workers, hospital workers and retail sales workers, at the worksites. The surveys assessed obesity, obesogenic behaviors, workplace factors, and worker participation in workplace health programs (WHPs). Descriptive and regression analyses were conducted to examine workplace factors associated with obesogenic behaviors. Results A total of 529 surveys were completed (219 hospital workers and 310 retail workers). More than 40% of workers were obese and 27% were overweight. In general, workers had poor diets (frequent consumption of sugary and high-fat foods) and engaged in little physical activity (only 30.9% met recommended physical activity guidelines). Access to and participation in workplace health programs varied greatly between hospital and retail sales workers. We identified several modifiable workplace factors, such as food source and work schedule, that were associated with diet, exercise, or participation in workplace health programs. Conclusion This study illustrates the high prevalence of obesity and obesogenic behaviors workers in 2 low-wage groups. The differences between work groups indicated that each group had unique facilitators and barriers to healthy eating and exercise. An understanding of how socioeconomic, demographic, and work-related factors influence health will help to identify high-risk populations for intervention and to design interventions tailored and relevant to the target audiences. PMID:25950573

  12. Worksite influences on obesogenic behaviors in low-wage workers in St Louis, Missouri, 2013-2014.

    Science.gov (United States)

    Strickland, Jaime R; Pizzorno, Galen; Kinghorn, Anna M; Evanoff, Bradley A

    2015-05-07

    More than one-third of US adults are obese. Workplace programs to reduce obesity and improve overall health are not available or accessible to all workers, particularly low-wage workers among whom obesity is more prevalent. The goal of the study was to identify modifiable workplace factors and behaviors associated with diet and exercise to inform future workplace interventions to improve health. We distributed paper and online surveys to 2 groups of low-wage workers, hospital workers and retail sales workers, at the worksites. The surveys assessed obesity, obesogenic behaviors, workplace factors, and worker participation in workplace health programs (WHPs). Descriptive and regression analyses were conducted to examine workplace factors associated with obesogenic behaviors. A total of 529 surveys were completed (219 hospital workers and 310 retail workers). More than 40% of workers were obese and 27% were overweight. In general, workers had poor diets (frequent consumption of sugary and high-fat foods) and engaged in little physical activity (only 30.9% met recommended physical activity guidelines). Access to and participation in workplace health programs varied greatly between hospital and retail sales workers. We identified several modifiable workplace factors, such as food source and work schedule, that were associated with diet, exercise, or participation in workplace health programs. This study illustrates the high prevalence of obesity and obesogenic behaviors workers in 2 low-wage groups. The differences between work groups indicated that each group had unique facilitators and barriers to healthy eating and exercise. An understanding of how socioeconomic, demographic, and work-related factors influence health will help to identify high-risk populations for intervention and to design interventions tailored and relevant to the target audiences.

  13. Elastically Deformable Side-Edge Link for Trailing-Edge Flap Aeroacoustic Noise Reduction

    Science.gov (United States)

    Khorrami, Mehdi R. (Inventor); Lockard, David P. (Inventor); Moore, James B. (Inventor); Su, Ji (Inventor); Turner, Travis L. (Inventor); Lin, John C. (Inventor); Taminger, Karen M. (Inventor); Kahng, Seun K. (Inventor); Verden, Scott A. (Inventor)

    2014-01-01

    A system is provided for reducing aeroacoustic noise generated by an aircraft having wings equipped with trailing-edge flaps. The system includes a plurality of elastically deformable structures. Each structure is coupled to and along one of the side edges of one of the trailing-edge flaps, and is coupled to a portion of one of the wings that is adjacent to the one of the side edges. The structures elastically deform when the trailing-edge flaps are deployed away from the wings.

  14. Localized Edge Vibrations and Edge Reconstruction by Joule Heating in Graphene Nanostructures

    DEFF Research Database (Denmark)

    Engelund, Mads; Fürst, Joachim Alexander; Jauho, Antti-Pekka

    2010-01-01

    Control of the edge topology of graphene nanostructures is critical to graphene-based electronics. A means of producing atomically smooth zigzag edges using electronic current has recently been demonstrated in experiments [Jia et al., Science 323, 1701 (2009)]. We develop a microscopic theory...... for current-induced edge reconstruction using density functional theory. Our calculations provide evidence for localized vibrations at edge interfaces involving unpassivated armchair edges. We demonstrate that these vibrations couple to the current, estimate their excitation by Joule heating, and argue...

  15. Edge-functionalization of armchair graphene nanoribbons with pentagonal-hexagonal edge structures.

    Science.gov (United States)

    Ryou, Junga; Park, Jinwoo; Kim, Gunn; Hong, Suklyun

    2017-06-21

    Using density functional theory calculations, we have studied the edge-functionalization of armchair graphene nanoribbons (AGNRs) with pentagonal-hexagonal edge structures. While the AGNRs with pentagonal-hexagonal edge structures (labeled (5,6)-AGNRs) are metallic, the edge-functionalized (5,6)-AGNRs with substitutional atoms opens a band gap. We find that the band structures of edge-functionalized (5,6)-N-AGNRs by substitution resemble those of defect-free (N-1)-AGNR at the Γ point, whereas those at the X point show the original ones of the defect-free N-AGNR. The overall electronic structures of edge-functionalized (5,6)-AGNRs depend on the number of electrons, supplied by substitutional atoms, at the edges of functionalized (5,6)-AGNRs.

  16. Power deposition on misaligned edges in COMPASS

    Directory of Open Access Journals (Sweden)

    R. Dejarnac

    2017-08-01

    Full Text Available If the decision is made not to apply a toroidal chamfer to tungsten monoblocks at ITER divertor vertical targets, exposed leading edges will arise as a result of assembly tolerances between adjacent plasma-facing components. Then, the advantage of glancing magnetic field angles for spreading plasma heat flux on top surfaces is lost at the misaligned edges with an interaction occurring at near normal incidence, which can drive melting for the expected inter-ELM heat fluxes. A dedicated experiment has been performed on the COMPASS tokamak to thoroughly study power deposition on misaligned edges using inner-wall limited discharges on a special graphite tile presenting gaps and leading edges directly viewed by a high resolution infra-red camera. The parallel power flux deducted from the unperturbed measurement far from the gap is fully consistent with the observed temperature increase at the leading edge, respecting the power balance. All the power flowing into the gap is deposited at the leading edge and no mitigation factor is required to explain the thermal response. Particle-in-cell simulations show that the ion Larmor smoothing effect is weak and that the power deposition on misaligned edges is well described by the optical approximation because of an electron dominated regime associated with non-ambipolar parallel current flow.

  17. AliEn - EDG Interoperability in ALICE

    CERN Document Server

    Bagnasco, S; Buncic, P; Carminati, F; Cerello, P G; Saiz, P

    2003-01-01

    AliEn (ALICE Environment) is a GRID-like system for large scale job submission and distributed data management developed and used in the context of ALICE, the CERN LHC heavy-ion experiment. With the aim of exploiting upcoming Grid resources to run AliEn-managed jobs and store the produced data, the problem of AliEn-EDG interoperability was addressed and an in-terface was designed. One or more EDG (European Data Grid) User Interface machines run the AliEn software suite (Cluster Monitor, Storage Element and Computing Element), and act as interface nodes between the systems. An EDG Resource Broker is seen by the AliEn server as a single Computing Element, while the EDG storage is seen by AliEn as a single, large Storage Element; files produced in EDG sites are registered in both the EDG Replica Catalogue and in the AliEn Data Catalogue, thus ensuring accessibility from both worlds. In fact, both registrations are required: the AliEn one is used for the data management, the EDG one to guarantee the integrity and...

  18. Edge-Disjoint Fibonacci Trees in Hypercube

    Directory of Open Access Journals (Sweden)

    Indhumathi Raman

    2014-01-01

    Full Text Available The Fibonacci tree is a rooted binary tree whose number of vertices admit a recursive definition similar to the Fibonacci numbers. In this paper, we prove that a hypercube of dimension h admits two edge-disjoint Fibonacci trees of height h, two edge-disjoint Fibonacci trees of height h-2, two edge-disjoint Fibonacci trees of height h-4 and so on, as subgraphs. The result shows that an algorithm with Fibonacci trees as underlying data structure can be implemented concurrently on a hypercube network with no communication latency.

  19. Natural and artificial spectral edges in exoplanets

    Science.gov (United States)

    Lingam, Manasvi; Loeb, Abraham

    2017-09-01

    Technological civilizations may rely upon large-scale photovoltaic arrays to harness energy from their host star. Photovoltaic materials, such as silicon, possess distinctive spectral features, including an 'artificial edge' that is characteristically shifted in wavelength shortwards of the 'red edge' of vegetation. Future observations of reflected light from exoplanets would be able to detect both natural and artificial edges photometrically, if a significant fraction of the planet's surface is covered by vegetation or photovoltaic arrays, respectively. The stellar energy thus tapped can be utilized for terraforming activities by transferring heat and light from the day side to the night side on tidally locked exoplanets, thereby producing detectable artefacts.

  20. Adobe Edge Animate CC for dummies

    CERN Document Server

    Rohde, Michael

    2013-01-01

    The easy way to build HTML5 mobile and web apps using Adobe's new Edge Animate CC Edge Animate CC is an approachable WYSIWYG alternative for leveraging the power of languages like HTML5, CSS3, and JavaScript to design and develop for the web and mobile devices, even if you have no programming experience. Written by Michael Rohde, the book calls on this seasoned web developer's wealth of experience using Edge Animate CC, and a companion website includes all code from the book to help you apply what you learn as you go. Features an easy-to-use interface, with a propert

  1. Edge-Matching Problems with Rotations

    DEFF Research Database (Denmark)

    Ebbesen, Martin; Fischer, Paul; Witt, Carsten

    2011-01-01

    Edge-matching problems, also called puzzles, are abstractions of placement problems with neighborhood conditions. Pieces with colored edges have to be placed on a board such that adjacent edges have the same color. The problem has gained interest recently with the (now terminated) Eternity II...... puzzle, and new complexity results. In this paper we consider a number of settings which differ in size of the puzzles and the manipulations allowed on the pieces. We investigate the effect of allowing rotations of the pieces on the complexity of the problem, an aspect that is only marginally treated so...

  2. Are green caterers more likely to serve healthy meals than non-green caterers? Results from a quantitative study in Danish worksite catering.

    Science.gov (United States)

    Mikkelsen, Be; Bruselius-Jensen, M; Andersen, Js; Lassen, A

    2006-10-01

    The present study aimed to investigate whether organic conversion in catering has positive effects on the nutritional quality of menus offered. The methodology was based on a self-administered questionnaire. The self-declared priority given to the use of organic foods was measured as the basis for assigning catering managers to one of two groups: 'green' or 'non-green' caterers. These groups were then compared with regard to the relative nutritional quality of the menu options offered to customers. The study was carried out among randomly selected Danish worksite catering outlets. The subjects participating in the study comprised 526 Danish worksite catering managers. The results showed a strong correlation between caterers' 'green-ness' and the nutritional quality of the menu options offered. Green caters had more healthy options in their menus than non-green caters, which is likely to result in improved nutritional quality of the diets of end consumers. The reason for this may partly be the increased service training efforts that green caterers practise in order to be able to implement organic foods successfully. It may also be associated with the fact that the price premiums and availability of the organic products forces caterers to serve menus with higher amounts of root and non-green leafy vegetables, pulses and seasonal vegetables. The present findings suggest that organic conversion of public canteens may be a good opportunity to promote healthier eating in public catering.

  3. A 30-month worksite-based lifestyle program to promote cardiovascular health in middle-aged bank employees: Design of the TANSNIP-PESA randomized controlled trial.

    Science.gov (United States)

    Coffeng, Jennifer K; van der Ploeg, Hidde P; Castellano, José M; Fernández-Alvira, Juan M; Ibáñez, Borja; García-Lunar, Inés; van der Beek, Allard J; Fernández-Ortiz, Antonio; Mocoroa, Agustín; García-Leal, Laura; Cárdenas, Evelyn; Rojas, Carolina; Martínez-Castro, María I; Santiago-Sacristán, Silvia; Fernández-Gallardo, Miriam; Mendiguren, José M; Bansilal, Sameer; van Mechelen, Willem; Fuster, Valentín

    2017-02-01

    Cardiovascular disease (CVD) is the leading cause of death worldwide. With atherosclerosis as the underlying cause for many CVD events, prevention or reduction of subclinical atherosclerotic plaque burden (SAPB) through a healthier lifestyle may have substantial public health benefits. The objective was to describe the protocol of a randomized controlled trial investigating the effectiveness of a 30-month worksite-based lifestyle program aimed to promote cardiovascular health in participants having a high or a low degree of SAPB compared with standard care. We will conduct a randomized controlled trial including middle-aged bank employees from the Progression of Early Subclinical Atherosclerosis cohort, stratified by SAPB (high SAPB n=260, low SAPB n=590). Within each stratum, participants will be randomized 1:1 to receive a lifestyle program or standard care. The program consists of 3 elements: (a) 12 personalized lifestyle counseling sessions using Motivational Interviewing over a 30-month period, (b) a wrist-worn physical activity tracker, and (c) a sit-stand workstation. Primary outcome measure is a composite score of blood pressure, physical activity, sedentary time, body weight, diet, and smoking (ie, adapted Fuster-BEWAT score) measured at baseline and at 1-, 2-, and 3-year follow-up. The study will provide insights into the effectiveness of a 30-month worksite-based lifestyle program to promote cardiovascular health compared with standard care in participants with a high or low degree of SAPB. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  4. A conceptual model for worksite intelligent physical exercise training - IPET - intervention for decreasing life style health risk indicators among employees: a randomized controlled trial

    Science.gov (United States)

    2014-01-01

    Background Health promotion at the work site in terms of physical activity has proven positive effects but optimization of relevant exercise training protocols and implementation for high adherence are still scanty. Methods/Design The aim of this paper is to present a study protocol with a conceptual model for planning the optimal individually tailored physical exercise training for each worker based on individual health check, existing guidelines and state of the art sports science training recommendations in the broad categories of cardiorespiratory fitness, muscle strength in specific body parts, and functional training including balance training. The hypotheses of this research are that individually tailored worksite-based intelligent physical exercise training, IPET, among workers with inactive job categories will: 1) Improve cardiorespiratory fitness and/or individual health risk indicators, 2) Improve muscle strength and decrease musculoskeletal disorders, 3) Succeed in regular adherence to worksite and leisure physical activity training, and 3) Reduce sickness absence and productivity losses (presenteeism) in office workers. The present RCT study enrolled almost 400 employees with sedentary jobs in the private as well as public sectors. The training interventions last 2 years with measures at baseline as well as one and two years follow-up. Discussion If proven effective, the intelligent physical exercise training scheduled as well as the information for its practical implementation can provide meaningful scientifically based information for public health policy. Trial Registration ClinicalTrials.gov, number: NCT01366950. PMID:24964869

  5. Effectiveness of a worksite mindfulness-related multi-component health promotion intervention on work engagement and mental health: results of a randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Jantien van Berkel

    Full Text Available OBJECTIVES: The aim of the present study was to evaluate the effectiveness of a worksite mindfulness-related multi-component health promotion intervention on work engagement, mental health, need for recovery and mindfulness. METHODS: In a randomized controlled trial design, 257 workers of two research institutes participated. The intervention group (n = 129 received a targeted mindfulness-related training, followed by e-coaching. The total duration of the intervention was 6 months. Data on work engagement, mental health, need for recovery and mindfulness were collected using questionnaires at baseline and after 6 and 12 months follow-up. Effects were analyzed using linear mixed effect models. RESULTS: There were no significant differences in work engagement, mental health, need for recovery and mindfulness between the intervention and control group after either 6- or 12-months follow-up. Additional analyses in mindfulness-related training compliance subgroups (high and low compliance versus the control group as a reference and subgroups based on baseline work engagement scores showed no significant differences either. CONCLUSIONS: This study did not show an effect of this worksite mindfulness-related multi-component health promotion intervention on work engagement, mental health, need for recovery and mindfulness after 6 and 12 months. TRIAL REGISTRATION: Netherlands Trial Register NTR2199.

  6. A conceptual model for worksite intelligent physical exercise training--IPET--intervention for decreasing life style health risk indicators among employees: a randomized controlled trial.

    Science.gov (United States)

    Sjøgaard, Gisela; Justesen, Just Bendix; Murray, Mike; Dalager, Tina; Søgaard, Karen

    2014-06-26

    Health promotion at the work site in terms of physical activity has proven positive effects but optimization of relevant exercise training protocols and implementation for high adherence are still scanty. The aim of this paper is to present a study protocol with a conceptual model for planning the optimal individually tailored physical exercise training for each worker based on individual health check, existing guidelines and state of the art sports science training recommendations in the broad categories of cardiorespiratory fitness, muscle strength in specific body parts, and functional training including balance training. The hypotheses of this research are that individually tailored worksite-based intelligent physical exercise training, IPET, among workers with inactive job categories will: 1) Improve cardiorespiratory fitness and/or individual health risk indicators, 2) Improve muscle strength and decrease musculoskeletal disorders, 3) Succeed in regular adherence to worksite and leisure physical activity training, and 3) Reduce sickness absence and productivity losses (presenteeism) in office workers. The present RCT study enrolled almost 400 employees with sedentary jobs in the private as well as public sectors. The training interventions last 2 years with measures at baseline as well as one and two years follow-up. If proven effective, the intelligent physical exercise training scheduled as well as the information for its practical implementation can provide meaningful scientifically based information for public health policy. ClinicalTrials.gov, number: NCT01366950.

  7. Are physical activity and nutrition indicators of the checklist of health promotion environments at worksites (CHEW) associated with employee obesity among hotel workers?

    Science.gov (United States)

    Nigg, Claudio R; Albright, Cheryl; Williams, Rebecca; Nichols, Carol; Renda, Gloria; Stevens, Victor J; Vogt, Thomas M

    2010-01-01

    Worksites provide opportunities to reach more than 60% of adults in the United States, including populations diverse in race, ethnicity, gender, age, occupation, income, and health status. Employers that provide worksite weight management interventions have the potential to reduce sick leave, health care costs, and workers compensation costs, and increase employee morale and worker efficiency. Hotels specifically, represent a broad cross-section of job categories, and most hotels are staffed and operated similarly around the world. However, from our literature review, there have been no investigations of the association between the hotel environment and employees' obesity. For this study, we tested the relationship between environmental factors in hotels and employees' body mass index (BMI). Overall no substantial correlations were found on any environmental variable. However, hotel size affected some relationships. Higher BMI was related to greater number of stairs, stair facilitation, and the healthy eating facilitation variables (excluding nutrition signs or posters) in medium sized hotels. Lower BMI was found with greater stair facilitation in small hotels; and with greater number of physical activity (PA) signs, lunch room nutrition signs, and hotel nutrition signs in large hotels. Unionized status affected only two environmental variables. For unionized hotels, BMI was negatively correlated with PA signs and positively correlated with the healthy eating facilitation. No logical pattern of association was found between workplace environmental factors and hotel employee BMI levels. Further research should investigate the interaction of the size and structure of the workplace with the impact of environmental efforts to reduce overweight and obesity.

  8. Systematic review on the financial return of worksite health promotion programmes aimed at improving nutrition and/or increasing physical activity.

    Science.gov (United States)

    van Dongen, J M; Proper, K I; van Wier, M F; van der Beek, A J; Bongers, P M; van Mechelen, W; van Tulder, M W

    2011-12-01

    This systematic review summarizes the current evidence on the financial return of worksite health promotion programmes aimed at improving nutrition and/or increasing physical activity. Data on study characteristics and results were extracted from 18 studies published up to 14 January 2011. Two reviewers independently assessed the risk of bias of included studies. Three metrics were (re-)calculated per study: the net benefits, benefit cost ratio (BCR) and return on investment (ROI). Metrics were averaged, and a post hoc subgroup analysis was performed to compare financial return estimates between study designs. Four randomized controlled trials (RCTs), 13 non-randomized studies (NRSs) and one modelling study were included. Average financial return estimates in terms of absenteeism benefits (NRS: ROI 325%, BCR 4.25; RCT: ROI -49%, BCR 0.51), medical benefits (NRS: ROI 95%, BCR 1.95; RCT: ROI -112%, BCR -0.12) or both (NRS: ROI 387%, BCR 4.87; RCT: ROI -92%, BCR 0.08) were positive in NRSs, but negative in RCTs. Worksite health promotion programmes aimed at improving nutrition and/or increasing physical activity generate financial savings in terms of reduced absenteeism costs, medical costs or both according to NRSs, whereas they do not according to RCTs. Since these programmes are associated with additional types of benefits, conclusions about their overall profitability cannot be made. © 2011 The Authors. obesity reviews © 2011 International Association for the Study of Obesity.

  9. Edge enhancement improves disruptive camouflage by emphasising false edges and creating pictorial relief.

    Science.gov (United States)

    Egan, John; Sharman, Rebecca J; Scott-Brown, Kenneth C; Lovell, Paul George

    2016-12-06

    Disruptive colouration is a visual camouflage composed of false edges and boundaries. Many disruptively camouflaged animals feature enhanced edges; light patches are surrounded by a lighter outline and/or a dark patches are surrounded by a darker outline. This camouflage is particularly common in amphibians, reptiles and lepidopterans. We explored the role that this pattern has in creating effective camouflage. In a visual search task utilising an ultra-large display area mimicking search tasks that might be found in nature, edge enhanced disruptive camouflage increases crypsis, even on substrates that do not provide an obvious visual match. Specifically, edge enhanced camouflage is effective on backgrounds both with and without shadows; i.e. this is not solely due to background matching of the dark edge enhancement element with the shadows. Furthermore, when the dark component of the edge enhancement is omitted the camouflage still provided better crypsis than control patterns without edge enhancement. This kind of edge enhancement improved camouflage on all background types. Lastly, we show that edge enhancement can create a perception of multiple surfaces. We conclude that edge enhancement increases the effectiveness of disruptive camouflage through mechanisms that may include the improved disruption of the object outline by implying pictorial relief.

  10. Flow distortion at a dense forest edge

    DEFF Research Database (Denmark)

    Dellwik, Ebba; Bingöl, Ferhat; Mann, Jakob

    2014-01-01

    The flow near tall forest edges is complex, yet poorly described. A field experiment using two meteorological masts equipped with sonic anemometers and a horizontally staring lidar was performed upwind and downwind of the interface between an open flat farmland and a tall (hc = 24 m) beech forest......, relative to the measurements upwind of the edge. The lidar data taken at several positions between the masts at 1.25hc show that the minimum wind speed occurred just upwind of the edge. At the 1.25hc level, at the forest mast, the momentum flux (\\documentclass...... qualitatively be explained with the concept of eddy‐blocking by the canopy top, which could also explain the observed increase in lateral variance and the decrease in the vertical variance. Despite the short distance to the edge of approximately 1.5hc, the beginning of a new internal boundary layer was visible...

  11. Floquet edge states in germanene nanoribbons

    KAUST Repository

    Tahir, Muhammad; Zhang, Qingyun; Schwingenschlö gl, Udo

    2016-01-01

    We theoretically demonstrate versatile electronic properties of germanene monolayers under circularly, linearly, and elliptically polarized light. We show for the high frequency regime that the edge states can be controlled by tuning the amplitude

  12. Edge energies and shapes of nanoprecipitates.

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, John C.

    2006-01-01

    In this report we present a model to explain the size-dependent shapes of lead nano-precipitates in aluminum. Size-dependent shape transitions, frequently observed at nanolength scales, are commonly attributed to edge energy effects. This report resolves an ambiguity in the definition and calculation of edge energies and presents an atomistic calculation of edge energies for free clusters. We also present a theory for size-dependent shapes of Pb nanoprecipitates in Al, introducing the concept of ''magic-shapes'' defined as precipitate shapes having near zero elastic strains when inserted into similarly shaped voids in the Al matrix. An algorithm for constructing a complete set of magic-shapes is presented. The experimental observations are explained by elastic strain energies and interfacial energies; edge energies play a negligible role. We replicate the experimental observations by selecting precipitates having magic-shapes and interfacial energies less than a cutoff value.

  13. Thermal stability of the tokamak plasma edge

    International Nuclear Information System (INIS)

    Stacey, W.M.

    1997-01-01

    The general linear, fluid, thermal instability theory for the plasma edge has been extended. An analysis of a two-dimensional fluid model of the plasma edge has identified the importance of many previously unappreciated phenomena associated with parallel and gyroviscous forces in the presence of large radial gradients, with large radial or parallel flows, with the temperature dependence of transport coefficients, and with the coupling of temperature, flow and density perturbations. The radiative condensation effect is generalized to include a further destabilizing condensation effect associated with radial heat conduction. Representative plasma edge neutral and impurity densities are found to be capable of driving thermal instabilities in the edge transport barrier and radiative mantle, respectively. (author)

  14. Folded membrane dialyzer with mechanically sealed edges

    Energy Technology Data Exchange (ETDEWEB)

    Markley, F.W.

    A semipermeable membrane is folded in accordion fashion to form a stack of pleats and the edges are sealed so as to isolate the opposite surfaces of the membrane. The stack is contained within a case that provides ports for flow of blood in contact with one surface of the membrane through channels formed by the pleats and also provides ports for flow of a dialysate through channels formed by the pleats in contact with the other surface of the membrane. The serpentine side edges of the membrane are sealed by a solidified plastic material, whereas effective mechanical means are provided to seal the end edges of the folded membrane. The mechanical means include a clamping strip which biases case sealing flanges into a sealed relationship with end portions of the membrane near the end edges, which portions extend from the stack and between the sealing flanges.

  15. Cover Art: River's Edge: Downward, Outward, Upward

    Directory of Open Access Journals (Sweden)

    Jonee Kulman Brigham

    2017-10-01

    Full Text Available Artist's Statement for the cover art of IJPS volume 4, issue 3: River's Edge: Downward, Outward, Upward, 2015. Mixed Media: photograph, inkjet printed on presentation matte of colored pencil over photograph.

  16. Edge and core dynamics in harness

    International Nuclear Information System (INIS)

    Ball, R.

    2007-01-01

    Resistive kink oscillations in tokamak plasmas are usually treated as core localized events, yet there there are several mechanisms by which they may interact with the edge dynamics. This suggests that we may regulate edge oscillatory behaviour, or ELMs, by harnessing the natural or contrived sawtooth period and amplitude. In this work I investigate core-edge oscillatory entrainment through direct propagation of heat pulses, inductive coupling, and global higher order resonance effects. In the core of auxiliary heated tokamak plasmas the ineluctable rhythm of slow buildup and rapid conversion of potential energy governs electron and heat radial transport. The growth phase of the sawtooth is accompanied by significant reconnection, then during the collapse the temperature and density in the core fall dramatically. There is evidence from experiments in reversed field pinch devices that ensuing energy fluxes can affect flow shear and confinement at the edge. The basis for this study is the dynamical (BDS) model for edge plasma behavior that was derived from electrostatic resistive MHD equations. The BDS model reflects the major qualitative features of edge dynamics that have been observed, such as L-H transitions and associated ELMs, hysteresis, and spontaneous reversal of poloidal shear flow. Under poorly dissipative conditions the transient behavior of the model can exhibit period-doubling, blue-sky, homoclinic, and other exotic bifurcations. Thus we might ask questions such as: Is it possible to mode-lock the edge dynamics to the core sawteeth? Can we induce, or prevent, a change in direction of shear flow? What about MHD effects? Is core-edge communication one way or is there some feedback? In the simplest prototype for coupled core-edge dynamics I model the sawtooth crash as a periodic power input to the edge potential energy reservoir. This is effected by coupling the BDS model to the dynamical system u = u(1 - u 2 - x 2 ) - ω s x, x = x(1-u 2 -x 2 ) + ω s u

  17. Numerical simulation of edge plasma in tokamak

    International Nuclear Information System (INIS)

    Chen Yiping; Qiu Lijian

    1996-02-01

    The transport process and transport property of plasma in edge layer of Tokamak are simulated by solving numerically two-dimensional and multi-fluid plasma transport equations using suitable simulation code. The simulation results can show plasma parameter distribution characteristics in the area of edge layer, especially the characteristics near the first wall and divertor target plate. The simulation results play an important role in the design of divertor and first wall of Tokamak. (2 figs)

  18. Edge on Impact Simulations and Experiments

    OpenAIRE

    Leavy, R. Brian; Clayton, John D.; Strack, O. Erik; Brannon, Rebecca M.; Strassburger, Elmar

    2013-01-01

    In the quest to understand damage and failure of ceramics in ballistic events, simplified experiments have been developed to benchmark behavior. One such experiment is known as edge on impact (EOI). In this experiment, an impactor strikes the edge of a thin square plate, and damage and cracking that occur on the free surface are captured in real time with high speed photography. If the material of interest is transparent, additional information regarding damage and wave mechanics within the s...

  19. Integrated core-edge-divertor modeling studies

    International Nuclear Information System (INIS)

    Stacey, W.M.

    2001-01-01

    An integrated calculation model for simulating the interaction of physics phenomena taking place in the plasma core, in the plasma edge and in the SOL and divertor of tokamaks has been developed and applied to study such interactions. The model synthesises a combination of numerical calculations (1) the power and particle balances for the core plasma, using empirical confinement scaling laws and taking into account radiation losses (2), the particle, momentum and power balances in the SOL and divertor, taking into account the effects of radiation and recycling neutrals, (3) the transport of feeling and recycling neutrals, explicitly representing divertor and pumping geometry, and (4) edge pedestal gradient scale lengths and widths, evaluation of theoretical predictions (5) confinement degradation due to thermal instabilities in the edge pedestals, (6) detachment and divertor MARFE onset, (7) core MARFE onsets leading to a H-L transition, and (8) radiative collapse leading to a disruption and evaluation of empirical fits (9) power thresholds for the L-H and H-L transitions and (10) the width of the edge pedestals. The various components of the calculation model are coupled and must be iterated to a self-consistent convergence. The model was developed over several years for the purpose of interpreting various edge phenomena observed in DIII-D experiments and thereby, to some extent, has been benchmarked against experiment. Because the model treats the interactions of various phenomena in the core, edge and divertor, yet is computationally efficient, it lends itself to the investigation of the effects of different choices of various edge plasma operating conditions on overall divertor and core plasma performance. Studies of the effect of feeling location and rate, divertor geometry, plasma shape, pumping and over 'edge parameters' on core plasma properties (line average density, confinement, density limit, etc.) have been performed for DIII-D model problems. A

  20. Presheath profiles in simulated tokamak edge plasmas

    International Nuclear Information System (INIS)

    LaBombard, B.; Conn, R.W.; Hirooka, Y.; Lehmer, R.; Leung, W.K.; Nygren, R.E.; Ra, Y.; Tynan, G.

    1988-04-01

    The PISCES plasma surface interaction facility at UCLA generates plasmas with characteristics similar to those found in the edge plasmas of tokamaks. Steady state magnetized plasmas produced by this device are used to study plasma-wall interaction phenomena which are relevant to tokamak devices. We report here progress on some detailed investigations of the presheath region that extends from a wall surface into these /open quotes/simulated tokamak/close quotes/ edge plasma discharges along magnetic field lines

  1. What's happening at the edge of tokamaks

    International Nuclear Information System (INIS)

    Crandall, D.H.

    1987-01-01

    Handling the power deposition at the walls of a plasma fusion device and controlling the particle fueling of the plasma originated the interest in the edge of the plasma by magnetic fusion scientists. Recently this interest has intensified because of clear evidence that the quality of the central plasma confinement depends in unexpected ways on details of how the edge plasma is managed. Significant efforts are being pursued to understand and exploit the improved plasma confinement observed in the 'H-mode' obtained with divertors and in the 'super-shots' obtained with low neutral particle flux from the edge of TFTR limiter plasmas. The controls, that determine whether or not these well-confined plasmas are obtained, are applied in the edge plasma where a wealth of atomic and molecular processes occur. A qualitative overview of current research related to plasma edge and desirable features is presented to guide thoughts about atomic processes to be included in modeling and interpreting the plasma edge of tokamaks. (orig.)

  2. Unsteady phenomena in the edge tone

    International Nuclear Information System (INIS)

    Paal, G.; Vaik, I.

    2007-01-01

    Despite its geometrical simplicity, the edge tone displays a remarkably complex behaviour. A plane jet oscillates around the wedge-shaped object with a relatively stable frequency and under certain circumstances emits an audible tone. This configuration plays a central role in the sound production of several wind instruments but occurs in industrial situations too. The flow exhibits various interesting nonlinear phenomena reported in the literature which are not entirely explained. In this paper, detailed high precision numerical simulations of the flow are reported under various conditions. Several phenomena are reproduced in agreement with the literature such as the existence of 'stages', the dependence of oscillation frequency on the outflow velocity and the orifice-edge distance within one stage, the pressure distribution on the edge surface, etc. A criterion for the appropriate time step for constant accuracy has been derived. The location of force action is surprisingly stable; it remains in a very narrow region of the wedge surface independently of the Reynolds number and the orifice-edge distance but it is much further behind the edge tip than reported in the literature. The various stages can coexist in different ways: jumping back and forth between stages or being superposed on each other. Regardless of the form, the first stage continues to be dominant even when the second and third stage appears. The question of disturbance propagation velocity and disturbance wavelength is also investigated. The development of higher harmonics of a single stage along the orifice-edge tip distance is presented

  3. Edge effect correction using ion beam figuring.

    Science.gov (United States)

    Yang, Bing; Xie, Xuhui; Li, Furen; Zhou, Lin

    2017-11-10

    The edge effect is regarded as one of the most difficult technical issues for fabricating large primary mirrors, as it can greatly reduce the key performance of the optical system. Ion beam figuring (IBF) has the advantage of no edge effect, so we can use it to remove high points on the edge and improve surface accuracy. The edge local correction method (ELCM) of IBF processes only the surface edge zone, and is very different from the current full caliber figuring method (FCFM). Therefore, it is necessary to study the ELCM of IBF. In this paper, the key factors of ELCM are analyzed, such as dwell time algorithm, edge data extension methods, and the outward dimension of the starting figuring point. At the same time, the distinctions between ELCM and FCFM are compared. Finally, a 142 mm diameter fused silica mirror is fabricated to verify the validity of the theoretical of ELCM. The experimental results indicate that the figuring precision and efficiency can be obviously improved by ELCM.

  4. Edge subdivision and edge multisubdivision versus some domination related parameters in generalized corona graphs

    Directory of Open Access Journals (Sweden)

    Magda Dettlaff

    2016-01-01

    Full Text Available Given a graph \\(G=(V,E\\, the subdivision of an edge \\(e=uv\\in E(G\\ means the substitution of the edge \\(e\\ by a vertex \\(x\\ and the new edges \\(ux\\ and \\(xv\\. The domination subdivision number of a graph \\(G\\ is the minimum number of edges of \\(G\\ which must be subdivided (where each edge can be subdivided at most once in order to increase the domination number. Also, the domination multisubdivision number of \\(G\\ is the minimum number of subdivisions which must be done in one edge such that the domination number increases. Moreover, the concepts of paired domination and independent domination subdivision (respectively multisubdivision numbers are defined similarly. In this paper we study the domination, paired domination and independent domination (subdivision and multisubdivision numbers of the generalized corona graphs.

  5. Transaortic Alfieri Edge-to-Edge Repair for Functional Mitral Regurgitation.

    Science.gov (United States)

    Imasaka, Ken-Ichi; Tayama, Eiki; Morita, Shigeki; Toriya, Ryohei; Tomita, Yukihiro

    2018-03-01

    There is controversy about handling functional mitral regurgitation in patients undergoing aortic valve or proximal aortic operations. We describe a transaortic Alfieri edge-to-edge repair for functional mitral regurgitation that reduces operative excessive invasion and prolonged cardiopulmonary bypass time. Between May 2013 and December 2016, 10 patients underwent transaortic Alfieri edge-to-edge mitral repair. There were no operative deaths. The severity of mitral regurgitation immediately after the operation by transesophageal echocardiography was none or trivial in all patients. A transaortic Alfieri edge-to-edge repair for functional mitral regurgitation is a simple and safe approach. Copyright © 2018 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  6. Nicotine dependence and cost-effectiveness of individualized support for smoking cessation: evidence from practice at a worksite in Japan.

    Directory of Open Access Journals (Sweden)

    Koshi Nakamura

    Full Text Available Given the lack of economic studies evaluating the outcomes of smoking cessation programs from the viewpoint of program sponsors, we conducted a case study to provide relevant information for worksites. The present study was carried out between 2006 and 2008 at a manufacturing factory in the Toyama Prefecture of Japan and included subjects who voluntarily entered a smoking cessation program. The program included face-to-face counselling followed by weekly contact to provide encouragement over six months using e-mail or inter-office mail. Nicotine patches were available if required. All 151 participants stopped smoking immediately. Over the 24-month study period, self-report showed 49.7% abstained continuously from smoking. The rate of 24-month consecutive abstinence was higher in participants with lower Fagerström Test scores for Nicotine Dependence at baseline than in those with higher scores (63.6% for 0-2 points vs. 46.5% for 3-6 points vs. 43.8% for 7-10 points; chi-square test p = 0.19. A logistic regression model showed a significant linear trend for the association between the score and abstinence status after adjustment for possible confounding factors (p = 0.03. The crude incremental cost for one individual to successfully quit smoking due to the support program was ¥46,379 (i.e., ¥100 = $1.28, £0.83, or €1.03 at foreign exchange rates. The corresponding costs for the three categories of the Fagerström Test score for Nicotine Dependence were ¥31,953, ¥47,450 and ¥64,956, respectively. When a sensitivity analysis was conducted based on the 95% confidence interval of the success rate, the variance in the corresponding costs was ¥25,514-45,034 for 0-2 points, ¥38,344-61,824 for 3-6 points, and ¥45,698-108,260 for 7-10 points. The degree of nicotine dependence may therefore be an important determinant of the cost-effectiveness of smoking cessation programs.

  7. Nicotine dependence and cost-effectiveness of individualized support for smoking cessation: evidence from practice at a worksite in Japan.

    Science.gov (United States)

    Nakamura, Koshi; Sakurai, Masaru; Miura, Katsuyuki; Morikawa, Yuko; Nagasawa, Shin-ya; Ishizaki, Masao; Kido, Teruhiko; Naruse, Yuchi; Suwazono, Yasushi; Nakagawa, Hideaki

    2013-01-01

    Given the lack of economic studies evaluating the outcomes of smoking cessation programs from the viewpoint of program sponsors, we conducted a case study to provide relevant information for worksites. The present study was carried out between 2006 and 2008 at a manufacturing factory in the Toyama Prefecture of Japan and included subjects who voluntarily entered a smoking cessation program. The program included face-to-face counselling followed by weekly contact to provide encouragement over six months using e-mail or inter-office mail. Nicotine patches were available if required. All 151 participants stopped smoking immediately. Over the 24-month study period, self-report showed 49.7% abstained continuously from smoking. The rate of 24-month consecutive abstinence was higher in participants with lower Fagerström Test scores for Nicotine Dependence at baseline than in those with higher scores (63.6% for 0-2 points vs. 46.5% for 3-6 points vs. 43.8% for 7-10 points; chi-square test p = 0.19). A logistic regression model showed a significant linear trend for the association between the score and abstinence status after adjustment for possible confounding factors (p = 0.03). The crude incremental cost for one individual to successfully quit smoking due to the support program was ¥46,379 (i.e., ¥100 = $1.28, £0.83, or €1.03 at foreign exchange rates). The corresponding costs for the three categories of the Fagerström Test score for Nicotine Dependence were ¥31,953, ¥47,450 and ¥64,956, respectively. When a sensitivity analysis was conducted based on the 95% confidence interval of the success rate, the variance in the corresponding costs was ¥25,514-45,034 for 0-2 points, ¥38,344-61,824 for 3-6 points, and ¥45,698-108,260 for 7-10 points. The degree of nicotine dependence may therefore be an important determinant of the cost-effectiveness of smoking cessation programs.

  8. Evaluation of environmental management resources (ISO 14001) at civil engineering construction worksites: a case study of the community of Madrid.

    Science.gov (United States)

    Rodríguez, Gracia; Alegre, Francisco Javier; Martínez, Germán

    2011-07-01

    In recent years, significant advances have been made in business organization and management. The growing demands of clients as well as the globalization of world markets are among the many factors that have led to the establishment of systems of quality control and environmental management as a competitive strategy for businesses. When compared to other professional sectors, the construction sector has been slower to respond to environmental problems and to adopt Environmental Management Systems (EMS). In the world today the ISO 14001 standard is currently the main frame of reference used by construction companies to implement this type of management system. This article presents the results of a general study regarding the evaluation of the application of the ISO 14001 standard at civil engineering construction worksites in the Community of Madrid (Spain), specifically pertaining to requirement 4.4.1, Resources, roles, responsibilities, and authority. According to requirement 4.4.1, company executives should appoint people responsible for implementing the EMS and also specify their responsibilities and functions. The personnel designated for supervising environmental work should also have sufficient authority to establish and maintain the EMS. The results obtained were the following: - EMS supervisors did not generally possess adequate training and solid experience in construction work and in the environment. Furthermore, supervisors were usually forced to combine their environmental work with other tasks, which made their job even more difficult. - Generally speaking, supervisors were not given sufficient authority and autonomy because productivity at the construction site had priority over environmental management. This was due to the fact that the company management did not have a respectful attitude toward the environment, nor was the management actively involved in the establishment of the EMS. - Insufficient resources were allocated to the Environmental

  9. Smoking cessation at the workplace. Results of a randomised controlled intervention study. Worksite physicians from the AIREL group.

    Science.gov (United States)

    Lang, T; Nicaud, V; Slama, K; Hirsch, A; Imbernon, E; Goldberg, M; Calvel, L; Desobry, P; Favre-Trosson, J P; Lhopital, C; Mathevon, P; Miara, D; Miliani, A; Panthier, F; Pons, G; Roitg, C; Thoores, M

    2000-05-01

    To compare the effects of a worksite intervention by the occupational physician offering simple advice of smoking cessation with a more active strategy of advice including a "quit date" and extra support. Employees of an electrical and gas company seen at the annual visit by their occupational physicians. CRITERIA END POINTS: Smoking point prevalence defined as the percentage of smokers who were non-smokers at one year. Secondary criteria were the percentage of smokers who stopped smoking for more than six months and the difference in prevalence of smoking in both groups. Randomised controlled trial. The unit of randomisation was the work site physician and a random sample of the employees of whom he or she was in charge. The length of the follow up was one year. Each of 30 work site physicians included in the study 100 to 150 employees. Among 504 subjects classified as smokers at baseline receiving simple advice (group A) and 591 the more active programme (group B), 68 (13.5%) in group A and 109 (18. 4%) were non-smokers one year later (p=0.03; p=0.01 taking the occupational physician as the statistical unit and using a non-parametric test). Twenty three subjects (4.6%) in group A and 36 (6.1%) in group B (p=0.26) declared abstinence of six months or more. Among non-smokers at baseline, 3.4% in both groups were smokers after one year follow up. The prevalence of smokers did not differ significantly at baseline (32.9% and 32.4%, p=0.75). After the intervention the prevalence of smoking was 30.8% in group A and 28. 7% in group B (p=0.19). An increase of the mean symptoms score for depression in those who quit was observed during this period. A simple cessation intervention strategy during a mandatory annual examination, targeting a population of smokers independently of their motivation to stop smoking or their health status, showed a 36% relative increase of the proportion of smokers who quit smoking as compared with what can be achieved through simple advice.

  10. Further results for crack-edge mappings by ray methods

    International Nuclear Information System (INIS)

    Norris, A.N.; Achenbach, J.D.; Ahlberg, L.; Tittman, B.R.

    1984-01-01

    This chapter discusses further extensions of the local edge mapping method to the pulse-echo case and to configurations of water-immersed specimens and transducers. Crack edges are mapped by the use of arrival times of edge-diffracted signals. Topics considered include local edge mapping in a homogeneous medium, local edge mapping algorithms, local edge mapping through an interface, and edge mapping through an interface using synthetic data. Local edge mapping is iterative, with two or three iterations required for convergence

  11. Forests on the edge: Microenvironmental drivers of carbon cycle response to edge effects

    Science.gov (United States)

    Reinmann, A.; Hutyra, L.; Smith, I. A.; Thompson, J.

    2017-12-01

    Twenty percent of the world's forest is within 100 m of a forest edge, but much of our understanding of forest carbon (C) cycling comes from large, intact ecosystems, which creates an important mismatch between the landscapes we study and those we aim to characterize. The temperate broadleaf forest is the most heavily fragmented forest biome in the world and its growth and carbon storage responses to forest edge effects appear to be the opposite of those in the tropical and boreal regions. We used field measurements to quantify the drivers of temperate forest C cycling response to edge effects, characterizing vegetative growth, respiration, and forest structure. We find large gradients in air and soil temperature from the forest interior to edge (up to 4 and 10° C, respectively) and the magnitude of this gradient is inversely correlated to the size of the forest edge growth enhancement. Further, leaf area index increases with proximity to the forest edge. While we also find increases in soil respiration between the forest interior and edge, this flux is small relative to aboveground growth enhancement near the edge. These findings represent an important advancement in our understanding of forest C cycle response to edge effects and will greatly improve our capacity to constrain biogenic C fluxes in fragmented and heterogeneous landscapes.

  12. Edge Modeling by Two Blur Parameters in Varying Contrasts.

    Science.gov (United States)

    Seo, Suyoung

    2018-06-01

    This paper presents a method of modeling edge profiles with two blur parameters, and estimating and predicting those edge parameters with varying brightness combinations and camera-to-object distances (COD). First, the validity of the edge model is proven mathematically. Then, it is proven experimentally with edges from a set of images captured for specifically designed target sheets and with edges from natural images. Estimation of the two blur parameters for each observed edge profile is performed with a brute-force method to find parameters that produce global minimum errors. Then, using the estimated blur parameters, actual blur parameters of edges with arbitrary brightness combinations are predicted using a surface interpolation method (i.e., kriging). The predicted surfaces show that the two blur parameters of the proposed edge model depend on both dark-side edge brightness and light-side edge brightness following a certain global trend. This is similar across varying CODs. The proposed edge model is compared with a one-blur parameter edge model using experiments of the root mean squared error for fitting the edge models to each observed edge profile. The comparison results suggest that the proposed edge model has superiority over the one-blur parameter edge model in most cases where edges have varying brightness combinations.

  13. Power spectrum weighted edge analysis for straight edge detection in images

    Science.gov (United States)

    Karvir, Hrishikesh V.; Skipper, Julie A.

    2007-04-01

    Most man-made objects provide characteristic straight line edges and, therefore, edge extraction is a commonly used target detection tool. However, noisy images often yield broken edges that lead to missed detections, and extraneous edges that may contribute to false target detections. We present a sliding-block approach for target detection using weighted power spectral analysis. In general, straight line edges appearing at a given frequency are represented as a peak in the Fourier domain at a radius corresponding to that frequency, and a direction corresponding to the orientation of the edges in the spatial domain. Knowing the edge width and spacing between the edges, a band-pass filter is designed to extract the Fourier peaks corresponding to the target edges and suppress image noise. These peaks are then detected by amplitude thresholding. The frequency band width and the subsequent spatial filter mask size are variable parameters to facilitate detection of target objects of different sizes under known imaging geometries. Many military objects, such as trucks, tanks and missile launchers, produce definite signatures with parallel lines and the algorithm proves to be ideal for detecting such objects. Moreover, shadow-casting objects generally provide sharp edges and are readily detected. The block operation procedure offers advantages of significant reduction in noise influence, improved edge detection, faster processing speed and versatility to detect diverse objects of different sizes in the image. With Scud missile launcher replicas as target objects, the method has been successfully tested on terrain board test images under different backgrounds, illumination and imaging geometries with cameras of differing spatial resolution and bit-depth.

  14. Edge strength of CAD/CAM materials.

    Science.gov (United States)

    Pfeilschifter, Maria; Preis, Verena; Behr, Michael; Rosentritt, Martin

    2018-05-16

    To investigate the edge force of CAD/CAM materials as a function of (a) material, (b) thickness, and (c) distance from the margin. Materials intended for processing with CAD/CAM were investigated: eight resin composites, one resin-infiltrated ceramic, and a clinically proven lithiumdisilicate ceramic (reference). To measure edge force (that is, load to failure/crack), plates (d = 1 mm) were fixed and loaded with a Vickers diamond indenter (1 mm/min, Zwick 1446) at a distance of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 mm from the edge. Edge force was defined as a loading force at a distance of 0.5 mm. The type of failure was determined. To investigate the influence of the thickness, all data were determined on 1-mm and 2-mm plates. To test the influence of bonding and an underlying dentin, individual 1-mm plates were bonded to a 1-mm-thick dentin-like (concerning modulus of elasticity) resin composite. For the 1-mm plates, edge force varied between 64.4 ± 24.2 N (Shofu Block HC) and 183.2 ± 63.3 N (ceramic reference), with significant (p ≤ 0.001) differences between the materials. For the 2-mm plates, values between 129.2 ± 32.5 N (Lava Ultimate) and 230.3 ± 67.5 N (Cerasmart) were found. Statistical comparison revealed no significant differences (p > 0.109) between the materials. Brilliant Crios (p = 0.023), Enamic (p = 0.000), Shofu Blocks HC (p = 0.009), and Grandio Bloc (p = 0.002) showed significantly different edge force between the 1-mm- and 2-mm-thick plates. The failure pattern was either cracking, (severe) chipping, or fracture. Material, material thickness, and distance from the edge impact the edge force of CAD/CAM materials. CAD/CAM materials should be carefully selected on the basis of their individual edge force and performance during milling. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Acyclicity in edge-colored graphs

    DEFF Research Database (Denmark)

    Gutin, Gregory; Jones, Mark; Sheng, Bin

    2017-01-01

    A walk W in edge-colored graphs is called properly colored (PC) if every pair of consecutive edges in W is of different color. We introduce and study five types of PC acyclicity in edge-colored graphs such that graphs of PC acyclicity of type i is a proper superset of graphs of acyclicity of type i......+1, i=1,2,3,4. The first three types are equivalent to the absence of PC cycles, PC closed trails, and PC closed walks, respectively. While graphs of types 1, 2 and 3 can be recognized in polynomial time, the problem of recognizing graphs of type 4 is, somewhat surprisingly, NP-hard even for 2-edge-colored...... graphs (i.e., when only two colors are used). The same problem with respect to type 5 is polynomial-time solvable for all edge-colored graphs. Using the five types, we investigate the border between intractability and tractability for the problems of finding the maximum number of internally vertex...

  16. Infective endocarditis following transcatheter edge-to-edge mitral valve repair: A systematic review.

    Science.gov (United States)

    Asmarats, Lluis; Rodriguez-Gabella, Tania; Chamandi, Chekrallah; Bernier, Mathieu; Beaudoin, Jonathan; O'Connor, Kim; Dumont, Eric; Dagenais, François; Paradis, Jean-Michel; Rodés-Cabau, Josep

    2018-05-10

    To assess the clinical characteristics, management, and outcomes of patients diagnosed with infective endocarditis (IE) after edge-to-edge mitral valve repair with the MitraClip device. Transcatheter edge-to-edge mitral valve repair has emerged as an alternative to surgery in high-risk patients. However, few data exist on IE following transcatheter mitral procedures. Four electronic databases (PubMed, Google Scholar, Embase, and Cochrane Library) were searched for original published studies on IE after edge-to-edge transcatheter mitral valve repair from 2003 to 2017. A total of 10 publications describing 12 patients with definitive IE (median age 76 years, 55% men) were found. The mean logistic EuroSCORE/EuroSCORE II were 41% and 45%, respectively. The IE episode occurred early (within 12 months post-procedure) in nine patients (75%; within the first month in five patients). Staphylococcus aureus was the most frequent (60%) causal microorganism, and severe mitral regurgitation was present in all cases but one. Surgical mitral valve replacement (SMVR) was performed in most (67%) patients, and the mortality associated with the IE episode was high (42%). IE following transcatheter edge-to-edge mitral valve repair is a rare but life-threatening complication, usually necessitating SMVR despite the high-risk profile of the patients. These results highlight the importance of adequate preventive measures and a prompt diagnosis and treatment of this serious complication. © 2018 Wiley Periodicals, Inc.

  17. Size effect model for the edge strength of glass with cut and ground edge finishing

    NARCIS (Netherlands)

    Vandebroek, M.; Louter, C.; Caspeele, R.; Ensslen, F.; Belis, J.L.I.F.

    2014-01-01

    The edge strength of glass is influenced by the size of the surface (near the edge) which is subjected to tensile stresses. To quantify this size effect, 8 series of single layer annealed glass beam specimens (as-received glass) were subjected to in-plane four-point bending with linearly increased

  18. Edge printability: techniques used to evaluate and improve extreme wafer edge printability

    Science.gov (United States)

    Roberts, Bill; Demmert, Cort; Jekauc, Igor; Tiffany, Jason P.

    2004-05-01

    The economics of semiconductor manufacturing have forced process engineers to develop techniques to increase wafer yield. Improvements in process controls and uniformities in all areas of the fab have reduced film thickness variations at the very edge of the wafer surface. This improved uniformity has provided the opportunity to consider decreasing edge exclusions, and now the outermost extents of the wafer must be considered in the yield model and expectations. These changes have increased the requirements on lithography to improve wafer edge printability in areas that previously were not even coated. This has taxed all software and hardware components used in defining the optical focal plane at the wafer edge. We have explored techniques to determine the capabilities of extreme wafer edge printability and the components of the systems that influence this printability. We will present current capabilities and new detection techniques and the influence that the individual hardware and software components have on edge printability. We will show effects of focus sensor designs, wafer layout, utilization of dummy edge fields, the use of non-zero overlay targets and chemical/optical edge bead optimization.

  19. Communal analysis of the tramway accidentology in France

    Directory of Open Access Journals (Sweden)

    Bentama Adnan

    2017-01-01

    Full Text Available Introduction: The purpose of this study is to assess the impact of communes size on the number and severity of tram accidents in France. Methodology: For this we calculated the average densities of accidents and serious victims of trams per line kilometer for each class of commune between 2012 and 2014. While adverting to the official data of accidentology and population. Results: The study has shown that almost one third of the municipalities served by the tram have known no accident. The study also showed that the size of the communes is proportional to the accidents density per kilometer of the tram line. The study has also concluded that the density of serious victims per line kilometer is maximum in the communes of average size. Conclusion: To carry out the modal shift toward the urban public transport, it is necessary to deepen our knowledge of the specificities of insecurity of these modes. This study is part of this framework, and made the link between the size of the communes and trams accidentology in France.

  20. Topological edge modes in multilayer graphene systems

    KAUST Repository

    Ge, Lixin

    2015-08-10

    Plasmons can be supported on graphene sheets as the Dirac electrons oscillate collectively. A tight-binding model for graphene plasmons is a good description as the field confinement in the normal direction is strong. With this model, the topological properties of plasmonic bands in multilayer graphene systems are investigated. The Zak phases of periodic graphene sheet arrays are obtained for different configurations. Analogous to Su-Schrieffer-Heeger (SSH) model in electronic systems, topological edge plasmon modes emerge when two periodic graphene sheet arrays with different Zak phases are connected. Interestingly, the dispersion of these topological edge modes is the same as that in the monolayer graphene and is invariant as the geometric parameters of the structure such as the separation and period change. These plasmonic edge states in multilayer graphene systems can be further tuned by electrical gating or chemical doping. © 2015 Optical Society of America.

  1. Performance of active edge pixel sensors

    Science.gov (United States)

    Bomben, M.; Ducourthial, A.; Bagolini, A.; Boscardin, M.; Bosisio, L.; Calderini, G.; D'Eramo, L.; Giacomini, G.; Marchiori, G.; Zorzi, N.; Rummler, A.; Weingarten, J.

    2017-05-01

    To cope with the High Luminosity LHC harsh conditions, the ATLAS inner tracker has to be upgraded to meet requirements in terms of radiation hardness, pile up and geometrical acceptance. The active edge technology allows to reduce the insensitive area at the border of the sensor thanks to an ion etched trench which avoids the crystal damage produced by the standard mechanical dicing process. Thin planar n-on-p pixel sensors with active edge have been designed and produced by LPNHE and FBK foundry. Two detector module prototypes, consisting of pixel sensors connected to FE-I4B readout chips, have been tested with beams at CERN and DESY. In this paper the performance of these modules are reported. In particular the lateral extension of the detection volume, beyond the pixel region, is investigated and the results show high hit efficiency also at the detector edge, even in presence of guard rings.

  2. Floquet edge states in germanene nanoribbons

    KAUST Repository

    Tahir, Muhammad

    2016-08-23

    We theoretically demonstrate versatile electronic properties of germanene monolayers under circularly, linearly, and elliptically polarized light. We show for the high frequency regime that the edge states can be controlled by tuning the amplitude of the light and by applying a static electric field. For circularly polarized light the band gap in one valley is reduced and in the other enhanced, enabling single valley edge states. For linearly polarized light spin-split states are found for both valleys, being connected by time reversal symmetry. The effects of elliptically polarized light are similar to those of circularly polarized light. The transport properties of zigzag nanoribbons in the presence of disorder confirm a nontrivial nature of the edge states under circularly and elliptically polarized light.

  3. Controllable edge feature sharpening for dental applications.

    Science.gov (United States)

    Fan, Ran; Jin, Xiaogang

    2014-01-01

    This paper presents a new approach to sharpen blurred edge features in scanned tooth preparation surfaces generated by structured-light scanners. It aims to efficiently enhance the edge features so that the embedded feature lines can be easily identified in dental CAD systems, and to avoid unnatural oversharpening geometry. We first separate the feature regions using graph-cut segmentation, which does not require a user-defined threshold. Then, we filter the face normal vectors to propagate the geometry from the smooth region to the feature region. In order to control the degree of the sharpness, we propose a feature distance measure which is based on normal tensor voting. Finally, the vertex positions are updated according to the modified face normal vectors. We have applied the approach to scanned tooth preparation models. The results show that the blurred edge features are enhanced without unnatural oversharpening geometry.

  4. Controllable Edge Feature Sharpening for Dental Applications

    Directory of Open Access Journals (Sweden)

    Ran Fan

    2014-01-01

    Full Text Available This paper presents a new approach to sharpen blurred edge features in scanned tooth preparation surfaces generated by structured-light scanners. It aims to efficiently enhance the edge features so that the embedded feature lines can be easily identified in dental CAD systems, and to avoid unnatural oversharpening geometry. We first separate the feature regions using graph-cut segmentation, which does not require a user-defined threshold. Then, we filter the face normal vectors to propagate the geometry from the smooth region to the feature region. In order to control the degree of the sharpness, we propose a feature distance measure which is based on normal tensor voting. Finally, the vertex positions are updated according to the modified face normal vectors. We have applied the approach to scanned tooth preparation models. The results show that the blurred edge features are enhanced without unnatural oversharpening geometry.

  5. Edge database analysis for extrapolation to ITER

    International Nuclear Information System (INIS)

    Shimada, M.; Janeschitz, G.; Stambaugh, R.D.

    1999-01-01

    An edge database has been archived to facilitate cross-machine comparisons of SOL and edge pedestal characteristics, and to enable comparison with theoretical models with an aim to extrapolate to ITER. The SOL decay lengths of power, density and temperature become broader for increasing density and q 95 . The power decay length is predicted to be 1.4-3.5 cm (L-mode) and 1.4-2.7 cm (H-mode) at the midplane in ITER. Analysis of Type I ELMs suggests that each giant ELM on ITER would exceed the ablation threshold of the divertor plates. Theoretical models are proposed for the H-mode transition, for Type I and Type III ELMs and are compared with the edge pedestal database. (author)

  6. Long coherence times for edge spins

    Science.gov (United States)

    Kemp, Jack; Yao, Norman Y.; Laumann, Christopher R.; Fendley, Paul

    2017-06-01

    We show that in certain one-dimensional spin chains with open boundary conditions, the edge spins retain memory of their initial state for very long times, even at infinite temperature. The long coherence times do not require disorder, only an ordered phase. In the integrable Ising and XYZ chains, the presence of a strong zero mode means the coherence time is infinite. When Ising is perturbed by interactions breaking the integrability, the coherence time remains exponentially long in the perturbing couplings. We show that this is a consequence of an edge ‘almost’ strong zero mode that almost commutes with the Hamiltonian. We compute this operator explicitly, allowing us to estimate accurately the plateau value of edge spin autocorrelator.

  7. Preparation of edge states by shaking boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Z.C. [Department of Physics, Fuzhou University, Fuzhou 350002 (China); Center for Quantum Sciences and School of Physics, Northeast Normal University, Changchun 130024 (China); Hou, S.C. [Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang, Sichuan (China); Wang, L.C. [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China); Yi, X.X., E-mail: yixx@nenu.edu.cn [Center for Quantum Sciences and School of Physics, Northeast Normal University, Changchun 130024 (China)

    2016-10-15

    Preparing topological states of quantum matter, such as edge states, is one of the most important directions in condensed matter physics. In this work, we present a proposal to prepare edge states in Aubry–André–Harper (AAH) model with open boundaries, which takes advantage of Lyapunov control to design operations. We show that edge states can be obtained with almost arbitrary initial states. A numerical optimalization for the control is performed and the dependence of control process on the system size is discussed. The merit of this proposal is that the shaking exerts only on the boundaries of the model. As a by-product, a topological entangled state is achieved by elaborately designing the shaking scheme.

  8. Evolution of Edge Pedestal Profiles Between ELMs

    Science.gov (United States)

    Floyd, J. P.; Stacey, W. M.; Groebner, R. J.

    2012-10-01

    The measured edge profile evolution in DIII-D discharges is analyzed in terms of the implied thermal diffusivities, ion diffusion coefficients and pinch velocities, using the momentum-balance methodology of Ref. [1], extended to take into account ion orbit loss and X-point loss. The evolution of the density, temperature, rotation and radial electric field profiles in the edge pedestal between edge localized modes (ELMs) provides information of these diffusive and non-diffusive transport processes in the pedestal of H-mode plasmas. This methodology is incorporated in the GTEDGE code developed for DIII-D data interpretation. Using a smaller integration time for the charge exchange recombination measurements than in Ref. [1] allows a more detailed examination of the time evolution of the ion temperature and rotation profiles. 6pt [1] W.M. Stacey and R.J. Groebner, Nucl. Fusion 51, 063024 (2011).

  9. Edge effects in composites by moire interferometry

    Science.gov (United States)

    Czarnek, R.; Post, D.; Herakovich, C.

    1983-01-01

    The very high sensitivity of moire interferometry has permitted the present edge effect experiments to be conducted at a low average stress and strain level, assuring linear and elastic behavior in the composite material samples tested. Sensitivity corresponding to 2450 line/mm moire was achieved with a 0.408 micron/fringe. Simultaneous observations of the specimen face and edge displacement fields showed good fringe definition despite the 1-mm thickness of the specimens and the high gradients, and it is noted that the use of a carrier pattern and optical filtering was effective in even these conditions. Edge effects and dramatic displacement gradients were confirmed in angle-ply composite laminates.

  10. Properties of the tokamak edge plasma

    International Nuclear Information System (INIS)

    Wolff, H.

    1988-01-01

    A short review of some features of the edge plasma in limiter tokamaks is given. The limits of the simple one-dimensional scrape-off layer (SOL) model and the relation between the core plasma are discussed. Multifaceted asymmetric radiation from the edge (MARFE) phenomena and detached plasma are closely connected with the particle and energy balance of the SOL. Their occurrence is based on the relation of plasma parameters of the edge plasma to those of the core. Important problems of plasma wall interactions are the detection of the impurity sources and sinks and the study of the impurity transport and shielding. The non-uniform character of plasma wall interactions and their dependence on the discharge performance still renders difficult any theoretical forecast of impurity distribution and transport and calls for better diagnostics. (author)

  11. Leading-edge vortex lifts swifts.

    Science.gov (United States)

    Videler, J J; Stamhuis, E J; Povel, G D E

    2004-12-10

    The current understanding of how birds fly must be revised, because birds use their hand-wings in an unconventional way to generate lift and drag. Physical models of a common swift wing in gliding posture with a 60 degrees sweep of the sharp hand-wing leading edge were tested in a water tunnel. Interactions with the flow were measured quantitatively with digital particle image velocimetry at Reynolds numbers realistic for the gliding flight of a swift between 3750 and 37,500. The results show that gliding swifts can generate stable leading-edge vortices at small (5 degrees to 10 degrees) angles of attack. We suggest that the flow around the arm-wings of most birds can remain conventionally attached, whereas the swept-back hand-wings generate lift with leading-edge vortices.

  12. Edge modulation of electronics and transport properties of cliff-edge phosphorene nanoribbons

    Science.gov (United States)

    Guo, Caixia; Wang, Tianxing; Xia, Congxin; Liu, Yufang

    2017-12-01

    Based on the first-principles calculations, we study the electronic structures and transport properties of cliff-like edge phosphorene nanoribbons (CPNRs), considering different types of edge passivation. The band structures of bare CPNRs possess the metallic features; while hydrogen (H), fluorine (F), chlorine (Cl) and oxygen (O) atoms-passivated CPNRs are semiconductor materials, and the band gap values monotonically decrease when the ribbon width increases. Moreover, the H and F-passivated CPNRs exhibit the direct band gap characteristics, while the Cl and O-passivated cases show the features of indirect band gap. In addition, the edge passivated CPNRs are more energetically stable than bare edge case. Meanwhile, our results also show that the transport properties of the CPNRs can be obviously influenced by the different edge passivation.

  13. Physics-based edge evaluation for improved color constancy

    NARCIS (Netherlands)

    Gijsenij, A.; Gevers, T.; van de Weijer, J.

    2009-01-01

    Edge-based color constancy makes use of image derivatives to estimate the illuminant. However, different edge types exist in real-world images such as shadow, geometry, material and highlight edges. These different edge types may have a distinctive influence on the performance of the illuminant

  14. Edge detection in landing budgerigars (Melopsittacus undulatus.

    Directory of Open Access Journals (Sweden)

    Partha Bhagavatula

    Full Text Available BACKGROUND: While considerable scientific effort has been devoted to studying how birds navigate over long distances, relatively little is known about how targets are detected, obstacles are avoided and smooth landings are orchestrated. Here we examine how visual features in the environment, such as contrasting edges, determine where a bird will land. METHODOLOGY/PRINCIPAL FINDINGS: Landing in budgerigars (Melopsittacus undulatus was investigated by training them to fly from a perch to a feeder, and video-filming their landings. The feeder was placed on a grey disc that produced a contrasting edge against a uniformly blue background. We found that the birds tended to land primarily at the edge of the disc and walk to the feeder, even though the feeder was in the middle of the disc. This suggests that the birds were using the visual contrast at the boundary of the disc to target their landings. When the grey level of the disc was varied systematically, whilst keeping the blue background constant, there was one intermediate grey level at which the budgerigar's preference for the disc boundary disappeared. The budgerigars then landed randomly all over the test surface. Even though this disc is (for humans clearly distinguishable from the blue background, it offers very little contrast against the background, in the red and green regions of the spectrum. CONCLUSIONS: We conclude that budgerigars use visual edges to target and guide landings. Calculations of photoreceptor excitation reveal that edge detection in landing budgerigars is performed by a color-blind luminance channel that sums the signals from the red and green photoreceptors, or, alternatively, receives input from the red double-cones. This finding has close parallels to vision in honeybees and primates, where edge detection and motion perception are also largely color-blind.

  15. Plasma edge modelling with ICRF coupling

    Directory of Open Access Journals (Sweden)

    Zhang Wei

    2017-01-01

    Full Text Available The physics of Radio-Frequency (RF wave heating in the Ion Cyclotron Range of Frequencies (ICRF in the core plasmas of fusion devices are relatively well understood while those in the Scrape-Off Layer (SOL remain still unresolved. This paper is dedicated to study the ICRF interactions with the plasma edge, mainly from the theoretical and numerical point of view, in particular with the 3D edge plasma fluid and neutral transport code EMC3-EIRENE and various wave codes. Here emphasis is given to the improvement of ICRF coupling with local gas puffing and to the ICRF induced density convection in the SOL.

  16. CO2 fluxes near a forest edge

    DEFF Research Database (Denmark)

    Sogachev, Andrey; Leclerc, Monique Y.; Zhang, Gensheng

    2008-01-01

    In contrast with recent advances on the dynamics of the flow at a forest edge, few studies have considered its role on scalar transport and, in particular, on CO2 transfer. The present study addresses the influence of the abrupt roughness change on forest atmosphere CO2 exchange and contrasts...... as a function of both sources/sinks distribution and the vertical structure of the canopy. Results suggest that the ground source plays a major role in the formation of wave-like vertical CO2 flux behavior downwind of a forest edge, despite the fact that the contribution of foliage sources/sinks changes...

  17. Edge detection techniques for iris recognition system

    International Nuclear Information System (INIS)

    Tania, U T; Motakabber, S M A; Ibrahimy, M I

    2013-01-01

    Nowadays security and authentication are the major parts of our daily life. Iris is one of the most reliable organ or part of human body which can be used for identification and authentication purpose. To develop an iris authentication algorithm for personal identification, this paper examines two edge detection techniques for iris recognition system. Between the Sobel and the Canny edge detection techniques, the experimental result shows that the Canny's technique has better ability to detect points in a digital image where image gray level changes even at slow rate

  18. Radiative edge layers in limiter tokamaks

    International Nuclear Information System (INIS)

    Monier-Garbet, P.

    1997-01-01

    The characteristics of the highly radiative edge layers produced in the limiter configuration and with an open ergodic divertor are reviewed, with emphasis on the results obtained in TEXTOR and Tore Supra. In these two experiments an impurity injection technique is used to obtain highly radiating homogeneous peripheral layers. This requires that the peripheral radiation capability be maximized, while at the same time avoiding plasma core contamination; it is also necessary to insure the stability of the radiating layer. These physics issues, governing the success of the highly radiative edge scenario, are discussed. (orig.)

  19. Wing Leading Edge Concepts for Noise Reduction

    Science.gov (United States)

    Shmilovich, Arvin; Yadlin, Yoram; Pitera, David M.

    2010-01-01

    This study focuses on the development of wing leading edge concepts for noise reduction during high-lift operations, without compromising landing stall speeds, stall characteristics or cruise performance. High-lift geometries, which can be obtained by conventional mechanical systems or morphing structures have been considered. A systematic aerodynamic analysis procedure was used to arrive at several promising configurations. The aerodynamic design of new wing leading edge shapes is obtained from a robust Computational Fluid Dynamics procedure. Acoustic benefits are qualitatively established through the evaluation of the computed flow fields.

  20. X-point effect on edge stability

    International Nuclear Information System (INIS)

    Saarelma, S; Kirk, A; Kwon, O J

    2011-01-01

    We study the effects of the X-point configuration on edge localized mode (ELM) triggering peeling and ballooning modes using fixed boundary equilibria and modifying the plasma shape to approach the limit of a true X-point. The current driven pure peeling modes are asymptotically stabilized by the X-point while the stabilizing effect on ballooning modes depends on the poloidal location of the X-point. The coupled peeling-ballooning modes experience the elimination of the peeling component as the X-point is introduced. This can significantly affect the edge stability diagrams used to analyse the ELM triggering mechanisms.

  1. Edge Cut Domination, Irredundance, and Independence in Graphs

    OpenAIRE

    Fenstermacher, Todd; Hedetniemi, Stephen; Laskar, Renu

    2016-01-01

    An edge dominating set $F$ of a graph $G=(V,E)$ is an \\textit{edge cut dominating set} if the subgraph $\\langle V,G-F \\rangle$ is disconnected. The \\textit{edge cut domination number} $\\gamma_{ct}(G)$ of $G$ is the minimum cardinality of an edge cut dominating set of $G.$ In this paper we study the edge cut domination number and investigate its relationships with other parameters of graphs. We also introduce the properties edge cut irredundance and edge cut independence.

  2. Are green caterers more likely to serve healthy meals than non-green caterers? Results from a quantitative study in Danish worksite catering

    DEFF Research Database (Denmark)

    Mikkelsen, Bent Egberg; Bruselius-Jensen, Maria Louisa; Andersen, J. S.

    2006-01-01

    was measured as the basis for assigning catering managers to one of two groups: 'green' or 'non-green' caterers. These groups were then compared with regard to the relative nutritional quality of the menu options offered to customers. Setting: The study was carried out among randomly selected Danish worksite...... than non-green caters, which is likely to result in improved nutritional quality of the diets of end consumers. The reason for this may partly be the increased service training efforts that green caterers practise in order to be able to implement organic foods successfully. It may also be associated......Objective: The present study aimed to investigate whether organic conversion in catering has positive effects on the nutritional quality of menus offered. Design: The methodology was based on a self-administered questionnaire. The self-declared priority given to the use of organic foods...

  3. Increased Physical Activity Leads to Improved Health-Related Quality of Life Among Employees Enrolled in a 12-Week Worksite Wellness Program.

    Science.gov (United States)

    Macaluso, Stephanie; Marcus, Andrea Fleisch; Rigassio-Radler, Diane; Byham-Gray, Laura D; Touger-Decker, Riva

    2015-11-01

    To determine the relationship between physical activity (PA) and health-related quality of life among university employees who enrolled in a worksite wellness program (WWP). The study was an interim analysis of data collected in a WWP. The sample consisted of 64 participants who completed 12- and 26-week follow-up appointments. Self-reported anxiety days significantly decreased from baseline to week 12. There were positive trends in self-rated health, vitality days, and summative unhealthy days from baseline to week 26. Among those with a self-reported history of hypertension (HTN), there was an inverse correlation between PA and summative physically and mentally unhealthy days at week 12. Among participants in this WWP with HTN, as PA increased there was a significant decrease in summative physically and mentally unhealthy days at week 12.

  4. Using the CDC Worksite Health ScoreCard to Assess Employer Health Promotion Efforts: A Case Study at Johns Hopkins Medicine.

    Science.gov (United States)

    Safeer, Richard; Bowen, Wendy; Maung, Zaw; Lucik, Meg

    2018-02-01

    The aim of this study was to determine whether the Centers for Disease Control and Prevention Worksite Health ScoreCard (ScoreCard) is an effective vehicle for measuring workplace health promotion programs and causing change in a large employer with multiple entities defined by different physical environments and types of workers. Johns Hopkins Medicine (JHM) representatives completed a baseline ScoreCard for each of their entities. In the subsequent year, improvement of the ScoreCard was tied to leadership performance evaluation. JHM year over year scores were analyzed, along with comparisons to national benchmarks. Eleven of the 12 JHM entities improved their overall score from year one to year two and the JHM enterprise surpassed national benchmarks in year two. Organizations can use the ScoreCard as an effective measurement tool and as a method to improve the number of evidenced-based health promotion strategies provided to their employees.

  5. Employee self-rated productivity and objective organizational production levels: effects of worksite health interventions involving reduced work hours and physical exercise.

    Science.gov (United States)

    von Thiele Schwarz, Ulrica; Hasson, Henna

    2011-08-01

    To investigate how worksite health interventions involving a 2.5-hour reduction of weekly working hours with (PE) or without (RWH) mandatory physical exercise affects productivity. Six workplaces in dental health care were matched and randomized to three conditions (PE, RWH and referents). Employees' (N = 177) self-rated productivity and the workplaces' production levels (number of patients) were examined longitudinally. Number of treated patients increased in all conditions during the intervention year. While RWH showed the largest increase in this measure, PE showed significant increases in self-rated productivity, that is, increased quantity of work and work-ability and decreased sickness absence. A reduction in work hours may be used for health promotion activities with sustained or improved production levels, suggesting an increased productivity since the same, or higher, production level can be achieved with lesser resources.

  6. Comparing Weight Loss-Maintenance Outcomes of a Worksite-Based Lifestyle Program Delivered via DVD and Face-to-Face: A Randomized Trial.

    Science.gov (United States)

    Ing, Claire Townsend; Miyamoto, Robin E S; Fang, Rui; Antonio, Mapuana; Paloma, Diane; Braun, Kathryn L; Kaholokula, Joseph Keawe'aimoku

    2018-03-01

    Native Hawaiians and other Pacific Islanders have high rates of overweight and obesity compared with other ethnic groups in Hawai'i. Effective weight loss and weight loss-maintenance programs are needed to address obesity and obesity-related health inequities for this group. Compare the effectiveness of a 9-month, worksite-based, weight loss-maintenance intervention delivered via DVD versus face-to-face in continued weight reduction and weight loss maintenance beyond the initial weight loss phase. We tested DVD versus face-to-face delivery of the PILI@Work Program's 9-month, weight loss-maintenance phase in Native Hawaiian-serving organizations. After completing the 3-month weight loss phase, participants ( n = 217) were randomized to receive the weight loss-maintenance phase delivered via trained peer facilitators or DVDs. Participant assessments at randomization and postintervention included weight, height, blood pressure, physical functioning, exercise frequency, and fat intake. Eighty-three face-to-face participants were retained at 12 months (74.1%) compared with 73 DVD participants (69.5%). There was no significant difference between groups in weight loss or weight loss maintenance. The number of lessons attended in Phase 1 of the intervention (β = 0.358, p = .022) and baseline systolic blood pressure (β = -0.038, p = .048) predicted percent weight loss at 12 months. Weight loss maintenance was similar across groups. This suggests that low-cost delivery methods for worksite-based interventions targeting at-risk populations can help address obesity and obesity-related disparities. Additionally, attendance during the weight loss phase and lower baseline systolic blood pressure predicted greater percent weight loss during the weight loss-maintenance phase, suggesting that early engagement and initial physical functioning improve long-term weight loss outcomes.

  7. Long Term Effects on Risk Factors for Cardiovascular Disease after 12-Months of Aerobic Exercise Intervention - A Worksite RCT among Cleaners.

    Directory of Open Access Journals (Sweden)

    Mette Korshøj

    Full Text Available Occupational groups exposed to high occupational physical activity have an increased risk for cardiovascular disease (CVD. This may be explained by the high relative aerobic workload. Enhanced cardiorespiratory fitness reduces the relative aerobic workload. Thus, the aim was to evaluate the 12-months effects of worksite aerobic exercise on risk factors for CVD among cleaners.One hundred and sixteen cleaners aged 18-65 years were randomized to a group performing aerobic exercise and a reference group receiving lectures. Outcomes were collected at baseline and after 12-months. A repeated measures 2×2 multi-adjusted mixed-model design was applied to compare the between-group differences using intention-to-treat analysis.Between-group differences (p<0.05 were found favouring the aerobic exercise group: cardiorespiratory fitness 2.15 (SE 1.03 mlO2/min/kg, aerobic workload -2.15 (SE 1.06 %HRR, resting HR -5.31 (SE 1.61 beats/min, high sensitive C-reactive protein -0.65 (SE 0.24 μg/ml. The blood pressure was unaltered. Stratified analyses on relative aerobic workload at baseline revealed that those with relative aerobic workloads ≥30% of HRR seems to impose a notable adverse effect on resting and ambulatory blood pressure.This long-term worksite aerobic exercise intervention among cleaners led to several beneficial effects, but also potential adverse effects among those with high relative aerobic workloads.Controlled-Trials.com ISRCTN86682076.

  8. Harmonic analysis of occupational-accident time-series as a part of the quantified risk evaluation in worksites: Application on electric power industry and construction sector

    International Nuclear Information System (INIS)

    Marhavilas, P.K.; Koulouriotis, D.E.; Spartalis, S.H.

    2013-01-01

    The development of an integrated risk analysis scheme, which will combine a well-considered selection of widespread techniques, would enable the companies to achieve efficient results on risk assessment. In this study, we develop a methodological framework (as a part of the quantified risk evaluation), by incorporating a new technique, that is implemented by the harmonic-analysis of time-series of occupational-accidents (called as HATS). Our objective is therefore, twofold: (i) the development of a new risk assessment framework (HATS technique) and the subsequent application of HATS on the worksites of electric power industry and construction sector, and (ii) the enrichment of the harmonic-analysis theoretical background, as far as the significance-level of spectral peaks is concerned, with fully-completed practical tables, that they have been produced by using the scientific literature. In fact, we apply HATS on occupational-accident time-series, which were (a) observed in the worksites of the Greek Public electric Power Corporation (PPC) and the Greek construction-companies (GCCs), and (b) recorded in great statistical-databases of PPC, and IKA (the Greek Social Insurance Institute/Ministry of Health), respectively. The results of HATS were tested statistically by using Shimshoni's significance-test. Moreover, the results of the comparative time/frequency-domain analysis of the accident time-series in PPC (for 1993–2009) and GCCs (for 1999–2007), prove that they are characterized by the existence of a periodic factor which (a) constitutes a permanent feature for the dynamic behavior of PPC's and GCCs' OHSS (occupational health and safety system), and (b) could be taken into account by risk managers in risk assessment, i.e., immediate suppressive measures must be taken place to abolish the danger source which is originated from the quasi-periodic appearance of the most important hazard sources

  9. Optically Unraveling the Edge Chirality-Dependent Band Structure and Plasmon Damping in Graphene Edges.

    Science.gov (United States)

    Duan, Jiahua; Chen, Runkun; Cheng, Yuan; Yang, Tianzhong; Zhai, Feng; Dai, Qing; Chen, Jianing

    2018-05-01

    The nontrivial topological origin and pseudospinorial character of electron wavefunctions make edge states possess unusual electronic properties. Twenty years ago, the tight-binding model calculation predicted that zigzag termination of 2D sheets of carbon atoms have peculiar edge states, which show potential application in spintronics and modern information technologies. Although scanning probe microscopy is employed to capture this phenomenon, the experimental demonstration of its optical response remains challenging. Here, the propagating graphene plasmon provides an edge-selective polaritonic probe to directly detect and control the electronic edge state at ambient condition. Compared with armchair, the edge-band structure in the bandgap gives rise to additional optical absorption and strongly absorbed rim at zigzag edge. Furthermore, the optical conductivity is reconstructed and the anisotropic plasmon damping in graphene systems is revealed. The reported approach paves the way for detecting edge-specific phenomena in other van der Waals materials and topological insulators. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Tangential 2-D Edge Imaging for GPI and Edge/Impurity Modeling

    International Nuclear Information System (INIS)

    Maqueda, Ricardo; Levinton, Fred M.

    2011-01-01

    Nova Photonics, Inc. has a collaborative effort at the National Spherical Torus Experiment (NSTX). This collaboration, based on fast imaging of visible phenomena, has provided key insights on edge turbulence, intermittency, and edge phenomena such as edge localized modes (ELMs) and multi-faceted axisymmetric radiation from the edge (MARFE). Studies have been performed in all these areas. The edge turbulence/intermittency studies make use of the Gas Puff Imaging diagnostic developed by the Principal Investigator (Ricardo Maqueda) together with colleagues from PPPL. This effort is part of the International Tokamak Physics Activity (ITPA) edge, scrape-off layer and divertor group joint activity (DSOL-15: Inter-machine comparison of blob characteristics). The edge turbulence/blob study has been extended from the current location near the midplane of the device to the lower divertor region of NSTX. The goal of this effort was to study turbulence born blobs in the vicinity of the X-point region and their circuit closure on divertor sheaths or high density regions in the divertor. In the area of ELMs and MARFEs we have studied and characterized the mode structure and evolution of the ELM types observed in NSTX, as well as the study of the observed interaction between MARFEs and ELMs. This interaction could have substantial implications for future devices where radiative divertor regions are required to maintain detachment from the divertor plasma facing components.

  11. Edge control in CNC polishing, paper 2: simulation and validation of tool influence functions on edges.

    Science.gov (United States)

    Li, Hongyu; Walker, David; Yu, Guoyu; Sayle, Andrew; Messelink, Wilhelmus; Evans, Rob; Beaucamp, Anthony

    2013-01-14

    Edge mis-figure is regarded as one of the most difficult technical issues for manufacturing the segments of extremely large telescopes, which can dominate key aspects of performance. A novel edge-control technique has been developed, based on 'Precessions' polishing technique and for which accurate and stable edge tool influence functions (TIFs) are crucial. In the first paper in this series [D. Walker Opt. Express 20, 19787-19798 (2012)], multiple parameters were experimentally optimized using an extended set of experiments. The first purpose of this new work is to 'short circuit' this procedure through modeling. This also gives the prospect of optimizing local (as distinct from global) polishing for edge mis-figure, now under separate development. This paper presents a model that can predict edge TIFs based on surface-speed profiles and pressure distributions over the polishing spot at the edge of the part, the latter calculated by finite element analysis and verified by direct force measurement. This paper also presents a hybrid-measurement method for edge TIFs to verify the simulation results. Experimental and simulation results show good agreement.

  12. Edge currents in frustrated Josephson junction ladders

    Science.gov (United States)

    Marques, A. M.; Santos, F. D. R.; Dias, R. G.

    2016-09-01

    We present a numerical study of quasi-1D frustrated Josephson junction ladders with diagonal couplings and open boundary conditions, in the large capacitance limit. We derive a correspondence between the energy of this Josephson junction ladder and the expectation value of the Hamiltonian of an analogous tight-binding model, and show how the overall superconducting state of the chain is equivalent to the minimum energy state of the tight-binding model in the subspace of one-particle states with uniform density. To satisfy the constraint of uniform density, the superconducting state of the ladder is written as a linear combination of the allowed k-states of the tight-binding model with open boundaries. Above a critical value of the parameter t (ratio between the intra-rung and inter-rung Josephson couplings) the ladder spontaneously develops currents at the edges, which spread to the bulk as t is increased until complete coverage is reached. Above a certain value of t, which varies with ladder size (t = 1 for an infinite-sized ladder), the edge currents are destroyed. The value t = 1 corresponds, in the tight-binding model, to the opening of a gap between two bands. We argue that the disappearance of the edge currents with this gap opening is not coincidental, and that this points to a topological origin for these edge current states.

  13. Superconducting Metallic Glass Transition-Edge-Sensors

    Science.gov (United States)

    Hays, Charles C. (Inventor)

    2013-01-01

    A superconducting metallic glass transition-edge sensor (MGTES) and a method for fabricating the MGTES are provided. A single-layer superconducting amorphous metal alloy is deposited on a substrate. The single-layer superconducting amorphous metal alloy is an absorber for the MGTES and is electrically connected to a circuit configured for readout and biasing to sense electromagnetic radiation.

  14. Edge maps: Representing flow with bounded error

    KAUST Repository

    Bhatia, Harsh

    2011-03-01

    Robust analysis of vector fields has been established as an important tool for deriving insights from the complex systems these fields model. Many analysis techniques rely on computing streamlines, a task often hampered by numerical instabilities. Approaches that ignore the resulting errors can lead to inconsistencies that may produce unreliable visualizations and ultimately prevent in-depth analysis. We propose a new representation for vector fields on surfaces that replaces numerical integration through triangles with linear maps defined on its boundary. This representation, called edge maps, is equivalent to computing all possible streamlines at a user defined error threshold. In spite of this error, all the streamlines computed using edge maps will be pairwise disjoint. Furthermore, our representation stores the error explicitly, and thus can be used to produce more informative visualizations. Given a piecewise-linear interpolated vector field, a recent result [15] shows that there are only 23 possible map classes for a triangle, permitting a concise description of flow behaviors. This work describes the details of computing edge maps, provides techniques to quantify and refine edge map error, and gives qualitative and visual comparisons to more traditional techniques. © 2011 IEEE.

  15. Nonlinear neoclassical transport in toroidal edge plasmas

    International Nuclear Information System (INIS)

    Fueloep, T.

    2002-01-01

    Edge plasma processes play a critical role for the global confinement of the plasma in a tokamak. In the edge region, where impurity ions are abundant and the temperature and density gradients are large, the assumptions of standard neoclassical theory break down. This paper reviews recent extensions of neoclassical theory to treat this problem, in particular our own work, which focuses on the nonlinear aspects of transport in a plasma with heavy impurity ions. In this theory, the pressure and temperature gradients are allowed to be steeper than in conventional theory neoclassical theory, so that the friction force between the bulk ions and heavy impurities is comparable to the parallel impurity pressure gradient. The impurity ions are then found to undergo a spontaneous rearrangement on each flux surface. This reduces their parallel friction with the bulk ions and causes the neoclassical ion flux to become a non-monotonic function of the gradients for plasma parameters typical of the tokamak edge. Thus, the neoclassical confinement is improved in regions where the gradients are large, such as in the edge pedestal. (orig.)

  16. Nonlinear neoclassical theory for toroidal edge plasmas

    International Nuclear Information System (INIS)

    Fueloep, T.; Helander, P.

    2001-01-01

    Edge plasma processes play a critical role for the global confinement of the plasma. In the edge region, where impurity ions are abundant and the temperature and density gradients are large, the assumptions of the standard neoclassical theory break down. We have extended the theory of neoclassical transport in an impure plasma with arbitrary cross section and aspect ratio to allow for steeper pressure and temperature gradients than are usually considered in the conventional theory. The gradients are allowed to be so large that the friction force between the bulk ions and heavy impurities is comparable to the parallel impurity pressure gradient. In this case the impurity ions are found to undergo a spontaneous rearrangement on each flux surface. This reduces their parallel friction with the bulk ions and causes the neoclassical ion flux to become a non-monotonic function of the gradients for plasma parameters typical of the tokamak edge. Thus, the neoclassical confinement is improved in regions where the gradients are large, such as in the edge pedestal. The theoretical predictions are compared with experimental data from several tokamaks. (orig.)

  17. The SKED: speckle knife edge detector

    International Nuclear Information System (INIS)

    Sharpies, S D; Light, R A; Achamfuo-Yeboah, S O; Clark, M; Somekh, M G

    2014-01-01

    The knife edge detector—also known as optical beam deflection—is a simple and robust method of detecting ultrasonic waves using a laser. It is particularly suitable for detection of high frequency surface acoustic waves as the response is proportional to variation of the local tilt of the surface. In the case of a specular reflection of the incident laser beam from a smooth surface, any lateral movement of the reflected beam caused by the ultrasonic waves is easily detected by a pair of photodiodes. The major disadvantage of the knife edge detector is that it does not cope well with optically rough surfaces, those that give a speckled reflection. The optical speckles from a rough surface adversely affect the efficiency of the knife edge detector, because 'dark' speckles move synchronously with 'bright' speckles, and their contributions to the ultrasonic signal cancel each other out. We have developed a new self-adapting sensor which can cope with the optical speckles reflected from a rough surface. It is inelegantly called the SKED—speckle knife edge detector—and like its smooth surface namesake it is simple, cheap, compact, and robust. We describe the theory of its operation, and present preliminary experimental results validating the overall concept and the operation of the prototype device

  18. The SKED: speckle knife edge detector

    Science.gov (United States)

    Sharpies, S. D.; Light, R. A.; Achamfuo-Yeboah, S. O.; Clark, M.; Somekh, M. G.

    2014-06-01

    The knife edge detector—also known as optical beam deflection—is a simple and robust method of detecting ultrasonic waves using a laser. It is particularly suitable for detection of high frequency surface acoustic waves as the response is proportional to variation of the local tilt of the surface. In the case of a specular reflection of the incident laser beam from a smooth surface, any lateral movement of the reflected beam caused by the ultrasonic waves is easily detected by a pair of photodiodes. The major disadvantage of the knife edge detector is that it does not cope well with optically rough surfaces, those that give a speckled reflection. The optical speckles from a rough surface adversely affect the efficiency of the knife edge detector, because 'dark' speckles move synchronously with 'bright' speckles, and their contributions to the ultrasonic signal cancel each other out. We have developed a new self-adapting sensor which can cope with the optical speckles reflected from a rough surface. It is inelegantly called the SKED—speckle knife edge detector—and like its smooth surface namesake it is simple, cheap, compact, and robust. We describe the theory of its operation, and present preliminary experimental results validating the overall concept and the operation of the prototype device.

  19. Anomalous transport in the tokamak edge

    International Nuclear Information System (INIS)

    Vayakis, G.

    1991-04-01

    The tokamak edge has been studied with arrays of Langmuir and magnetic probes on the DITE and COMPASS-C devices. Measurements of plasma parameters such as density, temperature and radial magnetic field were taken in order to elucidate the character, effect on transport and origin of edge fluctuations. The tokamak edge is a strongly-turbulent environment, with large electrostatic fluctuation levels and broad spectra. The observations, including direct correlation measurements, are consistent with a picture in which the observed magnetic field fluctuations are driven by the perturbations in electrostatic parameters. The propagation characteristics of the turbulence, investigated using digital spectral techniques, appear to be dominated by the variation of the radial electric field, both in limiter and divertor plasmas. A shear layer is formed, associated in each case with the last closed flux surface. In the shear layer, the electrostatic wavenumber spectra are significantly broader. The predictions of a drift wave model (DDGDT) and of a family of models evolving from the rippling mode (RGDT group), are compared with experimental results. RGDT, augmented by impurity radiation effects, is shown to be the most reasonable candidate to explain the nature of the edge turbulence, only failing in its estimate of the wavenumber range. (Author)

  20. Edge Sheared Flows and Blob Dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Myra, J.; D' Ippolito, D.; Russell, D., E-mail: jrmyra@lodestar.com [Lodestar Research Corporation, Boulder (United States); Davis, W. M.; Zweben, S. [Princeton Plasma Physics Laboratory, Princeton (United States); Terry, J.; LaBombard, B. [Massachusetts Institute of Technology, Cambridge (United States)

    2012-09-15

    Full text: A study of sheared flows in the edge and scrape-off layer (SOL) and their interaction with blob-filaments is presented. Edge sheared flows are believed to be important for the L-H, and H-L transitions. Blob generation and dynamics impacts both the (near-separatrix) scrape-off-layer (SOL) width critical for power handling in the divertor, and the interaction of plasma in the far SOL with plasma-facing components. These topics are critical for ITER and future devices. A fluid-based 2D curvature-interchange model embedded in the SOLT code is employed to study these issues. Sheared binormal flows both regulate the power flux crossing the separatrix and control the character of emitted turbulence structures such as blob-filaments. At a critical power level (depending on parameters) the laminar flows containing intermittent, but bound, structures give way to full-blown blob emissions signifying a transition from quasi-diffusive to convective transport. In order to diagnose sheared flows in experiments and assess their interaction with blobs, a blob-tracking algorithm has been developed and applied to both NSTX and Alcator C-Mod data. Blob motion and ellipticity can be affected by sheared flows, and are diagnosed and compared with seeded blob simulations. A picture of the interaction of blobs and sheared flows is emerging from advances in the theory and simulation of edge turbulence, combined with ever-improving capabilities for edge diagnostics and their analysis. (author)

  1. Edge Delamination of Monolayer Transition Metal Dichalcogenides.

    Science.gov (United States)

    Ly, Thuc Hue; Yun, Seok Joon; Thi, Quoc Huy; Zhao, Jiong

    2017-07-25

    Delamination of thin films from the supportive substrates is a critical issue within the thin film industry. The emergent two-dimensional, atomic layered materials, including transition metal dichalcogenides, are highly flexible; thus buckles and wrinkles can be easily generated and play vital roles in the corresponding physical properties. Here we introduce one kind of patterned buckling behavior caused by the delamination from a substrate initiated at the edges of the chemical vapor deposition synthesized monolayer transition metal dichalcogenides, led by thermal expansion mismatch. The atomic force microscopy and optical characterizations clearly showed the puckered structures associated with the strain, whereas the transmission electron microscopy revealed the special sawtooth-shaped edges, which break the geometrical symmetry for the buckling behavior of hexagonal samples. The condition of the edge delamination is in accordance with the fracture behavior of thin film interfaces. This edge delamination and buckling process is universal for most ultrathin two-dimensional materials, which requires more attention in various future applications.

  2. Evaluation of alternative snow plow cutting edges.

    Science.gov (United States)

    2009-05-01

    With approximately 450 snow plow trucks, the Maine Department of Transportation (MaineDOT) uses in : excess of 10,000 linear feet of plow cutting edges each winter season. Using the 2008-2009 cost per linear : foot of $48.32, the Departments total co...

  3. Edge diagnostics for tandem mirror machines

    International Nuclear Information System (INIS)

    Allen, S.L.

    1984-01-01

    The edge plasma in a tandem mirror machine shields the plasma core from cold neutral gas and impurities. A variety of diagnostics are used to measure the fueling, shielding, and confinement of the edge plasma in both the end plug and central cell regions. Fast ion gauges and residual gas analyzers measure the gas pressure and composition outside of the plasma. An array of Langmuir probes is used to measure the electron density and temperature. Extreme ultraviolet (euv) and visible spectroscopy are used to measure both the impurity and deuterium densities and to estimate the shielding factor for the core plasma. The linear geometry of a tandem mirror also allows direct measurements of the edge plasma by sampling the ions and electrons lost but the ends of the machine. Representative data obtained by these diagnostics during operation of the Tandem Mirror Experiment (TMX) and Tandem Mirror Experiment-Upgrade (TMX-U) experiments are presented. Diagnostics that are currently being developed to diagnose the edge plasma are also discussed

  4. Commercial Technology at the Tactical Edge

    Science.gov (United States)

    2013-06-01

    Software defined Networking ( SDN ), Autonomic Networking , and Cognitive Radios for Spectrum Sharing. Software defined ...www.opennetworking.org/. 41 Pan, P., “ Software Defined Network ( SDN ) Problem Statement and Use Cases for Data Center Applications,” IETF, 2011, http://tools.ietf.org/id...routinely at the tactical edge in the near future. These include software defined networking , autonomous networks , cognitive

  5. Acoustic streaming of a sharp edge.

    Science.gov (United States)

    Ovchinnikov, Mikhail; Zhou, Jianbo; Yalamanchili, Satish

    2014-07-01

    Anomalous acoustic streaming is observed emanating from sharp edges of solid bodies that are vibrating in fluids. The streaming velocities can be orders of magnitude higher than expected from the Rayleigh streaming at similar amplitudes of vibration. Acoustic velocity of fluid relative to a solid body diverges at a sharp edge, giving rise to a localized time-independent body force acting on the fluid. This force results in a formation of a localized jet. Two-dimensional numerical simulations are performed to predict acoustic streaming for low amplitude vibration using two methods: (1) Steady-state solution utilizing perturbation theory and (2) direct transient solution of the Navier-Stokes equations. Both analyses agree with each other and correctly predict the streaming of a sharp-edged vibrating blade measured experimentally. The origin of the streaming can be attributed to the centrifugal force of the acoustic fluid flow around a sharp edge. The dependence of this acoustic streaming on frequency and velocity is examined using dimensional analysis. The dependence law is devised and confirmed by numerical simulations.

  6. Edge-disjoint Hamiltonian cycles in hypertournaments

    DEFF Research Database (Denmark)

    Thomassen, Carsten

    2006-01-01

    We introduce a method for reducing k-tournament problems, for k >= 3, to ordinary tournaments, that is, 2-tournaments. It is applied to show that a k-tournament on n >= k + 1 + 24d vertices (when k >= 4) or on n >= 30d + 2 vertices (when k = 3) has d edge-disjoint Hamiltonian cycles if and only...

  7. Leading-Edge Vortex lifts swifts

    NARCIS (Netherlands)

    Videler, JJ; Stamhuis, EJ; Povel, GDE

    2004-01-01

    The current understanding of how birds fly must be revised, because birds use their hand-wings in an unconventional way to generate lift and drag. Physical models of a common swift wing in gliding posture with a 60degrees sweep of the sharp hand-wing leading edge were tested in a water tunnel.

  8. Zone edge effects with variable rate irrigation

    Science.gov (United States)

    Variable rate irrigation (VRI) systems may offer solutions to enhance water use efficiency by addressing variability within a field. However, the design of VRI systems should be considered to maximize application uniformity within sprinkler zones, while minimizing edge effects between such zones alo...

  9. Robotic edge machining using elastic abrasive tool

    Science.gov (United States)

    Sidorova, A. V.; Semyonov, E. N.; Belomestnykh, A. S.

    2018-03-01

    The article describes a robotic center designed for automation of finishing operations, and analyzes technological aspects of an elastic abrasive tool applied for edge machining. Based on the experimental studies, practical recommendations on the application of the robotic center for finishing operations were developed.

  10. Simultaneous embedding: edge orderings, relative positions, cutvertices

    NARCIS (Netherlands)

    Bläsius, T.; Karrer, A.; Rutter, I.

    A simultaneous embedding (with fixed edges) of two graphs (Formula presented.) and (Formula presented.) with common graph (Formula presented.) is a pair of planar drawings of (Formula presented.) and (Formula presented.) that coincide on G. It is an open question whether there is a polynomial-time

  11. Increased heat fluxes near a forest edge

    NARCIS (Netherlands)

    Klaassen, W; van Breugel, PB; Moors, EJ; Nieveen, JP

    2002-01-01

    Observations of sensible and latent heat flux above forest downwind of a forest edge show these fluxes to be larger than the available energy over the forest. The enhancement averages to 56 W m(-2), or 16% of the net radiation, at fetches less than 400 m, equivalent to fetch to height ratios less

  12. Increased heat fluxes near a forest edge

    NARCIS (Netherlands)

    Klaassen, W.; Breugel, van P.B.; Moors, E.J.; Nieveen, J.P.

    2002-01-01

    Observations of sensible and latent heat flux above forest downwind of a forest edge show these fluxes to be larger than the available energy over the forest. The enhancement averages to 56 W mm2, or 16 f the net radiation, at fetches less than 400 m, equivalent to fetch to height ratios less than

  13. Plasma edge cooling during RF heating

    International Nuclear Information System (INIS)

    Suckewer, S.; Hawryluk, R.J.

    1978-01-01

    A new approach to prevent the influx of high-Z impurities into the core of a tokamak discharge by using RF power to modify the edge plasma temperature profile is presented. This concept is based on spectroscopic measurements on PLT during ohmic heating and ATC during RF heating. A one dimensional impurity transport model is used to interpret the ATC results

  14. The visibility of IQHE at sharp edges: experimental proposals based on interactions and edge electrostatics

    International Nuclear Information System (INIS)

    Erkarslan, U; Oylumluoglu, G; Grayson, M; Siddiki, A

    2012-01-01

    The influence of the incompressible strips on the integer quantized Hall effect (IQHE) is investigated, considering a cleaved-edge overgrown (CEO) sample as an experimentally realizable sharp edge system. We propose a set of experiments to clarify the distinction between the large-sample limit when bulk disorder defines the IQHE plateau width and the small-sample limit smaller than the disorder correlation length, when self-consistent edge electrostatics define the IQHE plateau width. The large-sample or bulk quantized Hall (QH) regime is described by the usual localization picture, whereas the small-sample or edge regime is discussed within the compressible/incompressible strips picture, known as the screening theory of QH edges. Utilizing the unusually sharp edge profiles of the CEO samples, a Hall bar design is proposed to manipulate the edge potential profile from smooth to extremely sharp. By making use of a side-gate perpendicular to the two-dimensional electron system, it is shown that the plateau widths can be changed or even eliminated altogether. Hence, the visibility of IQHE is strongly influenced when adjusting the edge potential profile and/or changing the dc current direction under high currents in the nonlinear transport regime. As a second investigation, we consider two different types of ohmic contacts, namely highly transmitting (ideal) and highly reflecting (non-ideal) contacts. We show that if the injection contacts are non-ideal, but still ohmic, it is possible to measure directly the non-quantized transport taking place at the bulk of the CEO samples. The results of the experiments we propose will clarify the influence of the edge potential profile and the quality of the contacts, under QH conditions. (paper)

  15. Unconventional quantized edge transport in the presence of inter-edge coupling in intercalated graphene

    OpenAIRE

    Li, Yuanchang

    2016-01-01

    It is generally believed that the inter-edge coupling destroys the quantum spin Hall (QSH) effect along with the gap opening at the Dirac points. Using first-principles calculations, we find that the quantized edge transport persists in the presence of inter-edge coupling in Ta intercalated epitaxial graphene on SiC(0001), being a QSH insulator with the non-trivial gap of 81 meV. In this case, the band is characterized by two perfect Dirac cones with different Fermi velocities, yet only one m...

  16. Mapping Forest Edge Using Aerial Lidar

    Science.gov (United States)

    MacLean, M. G.

    2014-12-01

    Slightly more than 60% of Massachusetts is covered with forest and this land cover type is invaluable for the protection and maintenance of our natural resources and is a carbon sink for the state. However, Massachusetts is currently experiencing a decline in forested lands, primarily due to the expansion of human development (Thompson et al., 2011). Of particular concern is the loss of "core areas" or the areas within forests that are not influenced by other land cover types. These areas are of significant importance to native flora and fauna, since they generally are not subject to invasion by exotic species and are more resilient to the effects of climate change (Campbell et al., 2009). However, the expansion of development has reduced the amount of this core area, but the exact amount is still unknown. Current methods of estimating core area are not particularly precise, since edge, or the area of the forest that is most influenced by other land cover types, is quite variable and situation dependent. Therefore, the purpose of this study is to devise a new method for identifying areas that could qualify as "edge" within the Harvard Forest, in Petersham MA, using new remote sensing techniques. We sampled along eight transects perpendicular to the edge of an abandoned golf course within the Harvard Forest property. Vegetation inventories as well as Photosynthetically Active Radiation (PAR) at different heights within the canopy were used to determine edge depth. These measurements were then compared with small-footprint waveform aerial LiDAR datasets and imagery to model edge depths within Harvard Forest.

  17. Mortality after percutaneous edge-to-edge mitral valve repair: a contemporary review.

    Science.gov (United States)

    Kortlandt, Friso A; de Beenhouwer, Thomas; Swaans, Martin J; Post, Marco C; van der Heyden, Jan A S; Eefting, Frank D; Rensing, Benno J W M

    2016-04-01

    Percutaneous edge-to-edge mitral valve (MV) repair is a relatively new treatment option for mitral regurgitation (MR). After the feasibility and safety having been proved in low-surgical-risk patients, the use of this procedure has shifted more to the treatment of high-risk patients. With the absence of randomized controlled trials (RCT) for this particular subgroup, observational studies try to add evidence to the safety aspect of this procedure. These also provide short- and mid-term mortality figures. Several mortality predictors have been identified, which may help the optimal selection of patients who will benefit most from this technique. In this article we provide an overview of the literature about mortality and its predictors in patients treated with the percutaneous edge-to-edge device.

  18. Edge-effect interactions in fragmented and patchy landscapes.

    Science.gov (United States)

    Porensky, Lauren M; Young, Truman P

    2013-06-01

    Ecological edges are increasingly recognized as drivers of landscape patterns and ecosystem processes. In fragmented and patchy landscapes (e.g., a fragmented forest or a savanna with scattered termite mounds), edges can become so numerous that their effects pervade the entire landscape. Results of recent studies in such landscapes show that edge effects can be altered by the presence or proximity of other nearby edges. We considered the theoretical significance of edge-effect interactions, illustrated various landscape configurations that support them and reviewed existing research on this topic. Results of studies from a variety of locations and ecosystem types show that edge-effect interactions can have significant consequences for ecosystems and conservation, including higher tree mortality rates in tropical rainforest fragments, reduced bird densities in grassland fragments, and bush encroachment and reduced wildlife densities in a tropical savanna. To clarify this underappreciated concept and synthesize existing work, we devised a conceptual framework for edge-effect interactions. We first worked to reduce terminological confusion by clarifying differences among terms such as edge intersection and edge interaction. For cases in which nearby edge effects interact, we proposed three possible forms of interaction: strengthening (presence of a second edge causes stronger edge effects), weakening (presence of a second edge causes weaker edge effects), and emergent (edge effects change completely in the presence of a second edge). By clarifying terms and concepts, this framework enables more precise descriptions of edge-effect interactions and facilitates comparisons of results among disparate study systems and response variables. A better understanding of edge-effect interactions will pave the way for more appropriate modeling, conservation, and management in complex landscapes. © 2013 Society for Conservation Biology.

  19. Urbanization Impacts on Mammals across Urban-Forest Edges and a Predictive Model of Edge Effects

    OpenAIRE

    Villaseñor, Nélida R.; Driscoll, Don A.; Escobar, Martín A. H.; Gibbons, Philip; Lindenmayer, David B.

    2014-01-01

    With accelerating rates of urbanization worldwide, a better understanding of ecological processes at the wildland-urban interface is critical to conserve biodiversity. We explored the effects of high and low-density housing developments on forest-dwelling mammals. Based on habitat characteristics, we expected a gradual decline in species abundance across forest-urban edges and an increased decline rate in higher contrast edges. We surveyed arboreal mammals in sites of high and low housing den...

  20. Balancing the edge effects budget: bay scallop settlement and loss along a seagrass edge.

    Science.gov (United States)

    Carroll, John M; Furman, Bradley T; Tettelbach, Stephen T; Peterson, Bradley J

    2012-07-01

    Edge effects are a dominant subject in landscape ecology literature, yet they are highly variable and poorly understood. Often, the literature suggests simple models for edge effects-positive (enhancement at the edge), negative (enhancement at the interior), or no effect (neutral)--on a variety of metrics, including abundance, diversity, and mortality. In the marine realm, much of this work has focused on fragmented seagrass habitats due to their importance for a variety of commercially important species. In this study, the settlement, recruitment, and survival of bay scallops was investigated across a variety of seagrass patch treatments. By simultaneously collecting settlers (those viable larvae available to settle and metamorphose) and recruits (those settlers that survive some period of time, in this case, 6 weeks) on the same collectors, we were able to demonstrate a "balance" between positive and negative edge effects, resulting in a net neutral effect. Scallop settlement was significantly enhanced along seagrass edges, regardless of patch type while survival was elevated within patch interiors. However, recruitment (the net result of settlement and post-settlement loss) did not vary significantly from edge to center, representing a neutral effect. Further, results suggest that post-settlement loss, most likely due to predation, appears to be the dominant mechanism structuring scallop abundance, not patterns in settlement. These data illustrate the complexity of edge effects, and suggest that the metric used to investigate the effect (be it abundance, survival, or other metrics) can often influence the magnitude and direction of the perceived effect. Traditionally, high predation along a habitat edge would have indicated an "ecological trap" for the species in question; however, this study demonstrates that, at the population level, an ecological trap may not exist.

  1. Independent component analysis of edge information for face recognition

    CERN Document Server

    Karande, Kailash Jagannath

    2013-01-01

    The book presents research work on face recognition using edge information as features for face recognition with ICA algorithms. The independent components are extracted from edge information. These independent components are used with classifiers to match the facial images for recognition purpose. In their study, authors have explored Canny and LOG edge detectors as standard edge detection methods. Oriented Laplacian of Gaussian (OLOG) method is explored to extract the edge information with different orientations of Laplacian pyramid. Multiscale wavelet model for edge detection is also propos

  2. Edge-detect interpolation for direct digital periapical images

    International Nuclear Information System (INIS)

    Song, Nam Kyu; Koh, Kwang Joon

    1998-01-01

    The purpose of this study was to aid in the use of the digital images by edge-detect interpolation for direct digital periapical images using edge-deted interpolation. This study was performed by image processing of 20 digital periapical images; pixel replication, linear non-interpolation, linear interpolation, and edge-sensitive interpolation. The obtained results were as follows ; 1. Pixel replication showed blocking artifact and serious image distortion. 2. Linear interpolation showed smoothing effect on the edge. 3. Edge-sensitive interpolation overcame the smoothing effect on the edge and showed better image.

  3. Edge states in a ferromagnetic honeycomb lattice with armchair boundaries

    Science.gov (United States)

    Pantaleón, Pierre A.; Xian, Y.

    2018-02-01

    We investigate the properties of magnon edge states in a ferromagnetic honeycomb lattice with armchair boundaries. In contrast with fermionic graphene, we find novel edge states due to the missing bonds along the boundary sites. After introducing an external on-site potential at the outermost sites we find that the energy spectra of the edge states are tunable. Additionally, when a non-trivial gap is induced, we find that some of the edge states are topologically protected and also tunable. Our results may explain the origin of the novel edge states recently observed in photonic lattices. We also discuss the behavior of these edge states for further experimental confirmations.

  4. Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model

    International Nuclear Information System (INIS)

    Zhang, M.-X.; Kelly, P.M.; Easton, M.A.; Taylor, J.A.

    2005-01-01

    The edge-to-edge matching model for describing the interfacial crystallographic characteristics between two phases that are related by reproducible orientation relationships has been applied to the typical grain refiners in aluminum alloys. Excellent atomic matching between Al 3 Ti nucleating substrates, known to be effective nucleation sites for primary Al, and the Al matrix in both close packed directions and close packed planes containing these directions have been identified. The crystallographic features of the grain refiner and the Al matrix are very consistent with the edge-to-edge matching model. For three other typical grain refiners for Al alloys, TiC (when a = 0.4328 nm), TiB 2 and AlB 2 , the matching only occurs between the close packed directions in both phases and between the second close packed plane of the Al matrix and the second close packed plane of the refiners. According to the model, it is predicted that Al 3 Ti is a more powerful nucleating substrate for Al alloy than TiC, TiB 2 and AlB 2 . This agrees with the previous experimental results. The present work shows that the edge-to-edge matching model has the potential to be a powerful tool in discovering new and more powerful grain refiners for Al alloys

  5. GSGG edge cladding development: Final technical report

    International Nuclear Information System (INIS)

    Izumitani, T.; Meissner, H.E.; Toratani, H.

    1986-01-01

    The objectives of this project have been: (1) Investigate the possibility of chemical etching of GSGG crystal slabs to obtain increased strength. (2) Design and construct a simplified mold assembly for casting cladding glass to the edges of crystal slabs of different dimensions. (3) Conduct casting experiments to evaluate the redesigned mold assembly and to determine stresses as function of thermal expansion coefficient of cladding glass. (4) Clad larger sizes of GGG slabs as they become available. These tasks have been achieved. Chemical etching of GSGG slabs does not appear possible with any other acid than H 3 PO 4 at temperatures above 300 0 C. A mold assembly has been constructed which allowed casting cladding glass around the edges of the largest GGG slabs available (10 x 20 x 160 mm) without causing breakage through the annealing step

  6. Quantum nature of edge magnetism in graphene.

    Science.gov (United States)

    Golor, Michael; Wessel, Stefan; Schmidt, Manuel J

    2014-01-31

    It is argued that the subtle crossover from decoherence-dominated classical magnetism to fluctuation-dominated quantum magnetism is experimentally accessible in graphene nanoribbons. We show that the width of a nanoribbon determines whether the edge magnetism is on the classical side, on the quantum side, or in between. In the classical regime, decoherence is dominant and leads to static spin polarizations at the ribbon edges, which are well described by mean-field theories. The quantum Zeno effect is identified as the basic mechanism which is responsible for the spin polarization and thereby enables the application of graphene in spintronics. On the quantum side, however, the spin polarization is destroyed by dynamical processes. The great tunability of graphene magnetism thus offers a viable route for the study of the quantum-classical crossover.

  7. Emergent properties of patch shapes affect edge permeability to animals.

    Directory of Open Access Journals (Sweden)

    Vilis O Nams

    Full Text Available Animal travel between habitat patches affects populations, communities and ecosystems. There are three levels of organization of edge properties, and each of these can affect animals. At the lowest level are the different habitats on each side of an edge, then there is the edge itself, and finally, at the highest level of organization, is the geometry or structure of the edge. This study used computer simulations to (1 find out whether effects of edge shapes on animal behavior can arise as emergent properties solely due to reactions to edges in general, without the animals reacting to the shapes of the edges, and to (2 generate predictions to allow field and experimental studies to test mechanisms of edge shape response. Individual animals were modeled traveling inside a habitat patch that had different kinds of edge shapes (convex, concave and straight. When animals responded edges of patches, this created an emergent property of responding to the shape of the edge. The response was mostly to absolute width of the shapes, and not the narrowness of them. When animals were attracted to edges, then they tended to collect in convexities and disperse from concavities, and the opposite happened when animals avoided edges. Most of the responses occurred within a distance of 40% of the perceptual range from the tip of the shapes. Predictions were produced for directionality at various locations and combinations of treatments, to be used for testing edge behavior mechanisms. These results suggest that edge shapes tend to either concentrate or disperse animals, simply because the animals are either attracted to or avoid edges, with an effect as great as 3 times the normal density. Thus edge shape could affect processes like pollination, seed predation and dispersal and predator abundance.

  8. Gaining the Edge: Connecting with the Millennials

    Science.gov (United States)

    2008-12-01

    Cleaver’s and Partridge’s) entered Americans’ living rooms nightly. The Osmond’s and Beatles captivated music of the Boomer’s youth. Powerful...AIR WAR COLLEGE AIR UNIVERSITY GAINING THE EDGE: CONNECTING WITH THE MILLENNIALS by Kay A. Smith, Lt Col, USAF A Research Report Submitted to... the Faculty In Partial Fulfillment of the Graduation Requirements 1 December 2008 DISCLAIMER The views expressed in this academic research

  9. Lived citizenship on the edge of society

    DEFF Research Database (Denmark)

    work. Drawing on the notion of intimate citizenship and an understanding of citizenship as socio-spatial, the theoretical framework addresses the challenges of enhancing the agency of social work clients and of promoting inclusive citizenship, and how these challenges are shaped by emotions, affect......, rationality, materiality, power relations, policies and managerial strategies. Lived Citizenship on the Edge of Society will be of interest to students and scholars across a range of disciplines including social policy and social work....

  10. Images of Edge Turbulence in NSTX

    International Nuclear Information System (INIS)

    Zweben, S.J.; Bush, C.E.; Maqueda, R.; Munsat, T.; Stotler, D.; Lowrance, J.; Mastracola, V.; Renda, G.

    2004-01-01

    The 2-D structure of edge plasma turbulence has been measured in the National Spherical Torus Experiment (NSTX) by viewing the emission of the Da spectral line of deuterium. Images have been made at framing rates of up to 250,000 frames/sec using an ultra-high speed CCD camera developed by Princeton Scientific Instruments. A sequence of images showing the transition between L-mode and H-mode states is shown

  11. Transport in the tokamak plasma edge

    International Nuclear Information System (INIS)

    Vold, E.L.

    1989-01-01

    Experimental observations characterize the edge plasma or boundary layer in magnetically confined plasmas as a region of great complexity. Evidence suggests the edge physics plays a key role in plasma confinement although the mechanism remains unresolved. This study focuses on issues in two areas: observed poloidal asymmetries in the Scrape Off Layer (SOL) edge plasma and the physical nature of the plasma-neutral recycling. A computational model solves the coupled two dimensional partial differential equations governing the plasma fluid density, parallel and radial velocities, electron and ion temperatures and neutral density under assumptions of toroidal symmetry, ambipolarity, anomalous diffusive radial flux, and neutral-ion thermal equilibrium. Drift flow and plasma potential are calculated as dependent quantities. Computational results are compared to experimental data for the CCT and TEXTOR:ALT-II tokamak limiter cases. Comparisons show drift flux is a major component of the poloidal flow in the SOL along the tangency/separatrix. Plasma-neutral recycling is characterized in several tokamak divertors, including the C-MOD device using magnetic flux surface coordinates. Recycling is characterized by time constant, τ rc , on the order of tens of milliseconds. Heat flux transients from the core into the edge on shorter time scales significantly increase the plasma temperatures at the target and may increase sputtering. Recycling conditions in divertors vary considerably depending on recycled flux to the core. The high density, low temperature solution requires that the neutral mean free path be small compared to the divertor target to x-point distance. The simulations and analysis support H-mode confinement and transition models based on the recycling divertor solution bifurcation

  12. The transition-edge microbolometer (TREMBOL)

    International Nuclear Information System (INIS)

    Wentworth, S.M.; Neikirk, D.P.

    1990-01-01

    The TREMBOL (transition-edge microbolometer) and the composite TREMBOL are introduced as detectors for FIR imaging arrays. The TREMBOL uses a superconductor's sharp change in resistance at the normal conduction to superconduction transition. The structure of the composite TREMBOL enables heating of the individual detectors in an array up to their transition temperature, and can thus be used in multiplexing, which would be very advantageous for two-dimensional arrays. 23 refs

  13. Multi-scale Regions from Edge Fragments

    DEFF Research Database (Denmark)

    Kazmi, Wajahat; Andersen, Hans Jørgen

    2014-01-01

    In this article we introduce a novel method for detecting multi-scale salient regions around edges using a graph based image compression algorithm. Images are recursively decomposed into triangles arranged into a binary tree using linear interpolation. The entropy of any local region of the image......), their performance is comparable to SIFT (Lowe, 2004).We also show that when they are used together with MSERs (Matas et al., 2002), the performance of MSERs is boosted....

  14. Edge rotational magnons in magnonic crystals

    International Nuclear Information System (INIS)

    Lisenkov, Ivan; Kalyabin, Dmitry; Nikitov, Sergey

    2013-01-01

    It is predicted that in 2D magnonic crystals the edge rotational magnons of forward volume magnetostatic spin waves can exist. Under certain conditions, locally bounded magnons may appear within the crystal consisting of the ferromagnetic matrix and periodically inserted magnetic/non-magnetic inclusions. It is also shown that interplay of different resonances in 2D magnonic crystal may provide conditions for spin wave modes existence with negative group velocity

  15. Edge modelling for W7-X

    International Nuclear Information System (INIS)

    Schneider, R.; Borchardt, M.; Riemann, J.; Bonnin, X.; Nuehrenberg, J.; Mutzke, A.

    2001-01-01

    The edge modelling activities for W7-X are summarized. The status of the new 3D SOL transport code BoRiS is presented, including an algorithm for calculation of magnetic coordinates and metric coefficients. In addition, the analysis of a toroidally averaged island topology with respect to the effect of drift and currents is discussed using the 2D B2-solps5.0 code. (author)

  16. ICRF/edge physics research on TEXTOR

    International Nuclear Information System (INIS)

    Oost, G. van; Nieuwenhove, R. van; Koch, R.; Messiaen, A.M.; Vandenplas, P.E.; Weynants, R.R.; Dippel, K.H.; Finken, K.H.; Lie, Y.T.; Pospieszczyk, A.; Samm, U.; Schweer, B.; Conn, R.W.; Corbett, W.J.; Goebel, D.M.; Moyer, R.A.; California Univ., Los Angeles

    1990-01-01

    Extensive investigations of ICRF-induced effects on the edge plasma and on plasma-wall interaction were conducted on TEXTOR under different wall- and limiter as well as plasma- and heating conditions. Several strong effects of ICRF on the edge parameters were observed on TEXTOR, such as density rise, instantaneous electron heating, modification of SOL profiles, influx of ligth and/or heavy impurities, increased heat flux to the limiters, and production of energetic ions in the SOL. The fast response time of some of the changes and the observation of a maximum in the SOL profile of electron temperature, heat flux and metal sputtering clearly demonstrated that RF power is directly absorbed in the SOL. Estimates of this power amount to several percent of the total RF power launched into the plasma. Plasma-wall interaction during ICRF was substantially reduced by an appropriate choice of the wall conditioning procedures (wall carbonization with liner at 400degC or, above all, boronization). As a result record low values of the radiated power fraction were achieved during ICRF and long pulse, high power, low impurity operation was possible. Further improvement was obtained by ICRF antenna phasing. When ICRF power is coupled to the plasma, several effects on the core and edge plasma influence the operation of the toroidal pump limiter ALT-II. Experimental and theoretical studies were performed to elucidate the mechanisms responsible for the ICRF-induced effects, including the propagation of plasma waves in the edge plasma and nonlinear phenomena such as parametric decay, important changes in the DC current between the antenna structure and the liner due to the sheath effect at the antennas, and the generation of waves at harmonics of the RF generator frequency. Radial profiles of the DC radial and poloidal electric fields as well as a localized RF electric field structure were measured in the SOL using a fast scanning probe. (orig.)

  17. Depth from Edge and Intensity Based Stereo.

    Science.gov (United States)

    1982-09-01

    a Mars Viking vehicle, and a random dotted coffee jar. Assessment of the algorithm is a bit difficult: it uses a fairly simple control structure with...correspondences. This use of an evaluation function estimator allowed the introduction of the extensive pruning of a branch and bound algorithm. Even with it...Figure 3-6). This is the edge reversal constraint, and was integral to the pruning . As it happens, this same constraint is the key to the use of the

  18. Canny edge-based deformable image registration.

    Science.gov (United States)

    Kearney, Vasant; Huang, Yihui; Mao, Weihua; Yuan, Baohong; Tang, Liping

    2017-02-07

    This work focuses on developing a 2D Canny edge-based deformable image registration (Canny DIR) algorithm to register in vivo white light images taken at various time points. This method uses a sparse interpolation deformation algorithm to sparsely register regions of the image with strong edge information. A stability criterion is enforced which removes regions of edges that do not deform in a smooth uniform manner. Using a synthetic mouse surface ground truth model, the accuracy of the Canny DIR algorithm was evaluated under axial rotation in the presence of deformation. The accuracy was also tested using fluorescent dye injections, which were then used for gamma analysis to establish a second ground truth. The results indicate that the Canny DIR algorithm performs better than rigid registration, intensity corrected Demons, and distinctive features for all evaluation matrices and ground truth scenarios. In conclusion Canny DIR performs well in the presence of the unique lighting and shading variations associated with white-light-based image registration.

  19. DIII-D edge physics database

    International Nuclear Information System (INIS)

    Jong, R.A.; Porter, G.D.; Hill, D.N.; Buchenauer, D.A.; Bramson, G.

    1992-03-01

    We have developed an edge-physics database containing data for the plasma in the divertor region and the scrape-off layer (SOL) for the DIII-D tokamak. The database provides many of the parameters necessary to model the power flow to the divertor and other plasma processes in the plasma edge. It will also facilitate the analysis of DIII-D data for comparison with other divertor tokamaks. In addition to the core plasma parameters, edge-specific data are included in this database. Initial results using the database show good agreement between the pressure profiles measured by the Langmuir probes and those determined from the Thomson data for the inner strike point, but not for the outer strike point region. We also find that the ratio of separatrix density to average core density, as well as the in/out asymmetry in the SOL power at the divertor in DIII-D do not agree with values currently assumed in modeling the International Thermonuclear Experimental Reactor (ITER)

  20. The edge plasma and divertor in TIBER

    Energy Technology Data Exchange (ETDEWEB)

    Barr, W.L.

    1987-10-16

    An open divertor configuration has been adopted for TIBER. Most recent designs, including DIII-D, NET and CIT use open configurations and rely on a dense edge plasma to shield the plasma from the gas produced at the neutralizer plate. Experiments on ASDEX, PDX, D-III, and recently on DIII-D have shown that a dense edge plasma can be produced by re-ionizing most of the gas produced at the plate. This high recycling mode allows a large flux of particles to carry the heat to the plate, so that the mean energy per particle can be low. Erosion of the plate can be greatly reduced if the average impact energy of the ions at the plate can be reduced to near or below the threshold for sputtering of the plate material. The present configuration allows part of the flux of edge plasma ions to be neutralized at the entrance to the pumping duct so that helium is pumped as well as hydrogen. 7 refs., 3 figs.

  1. Bilayer graphene: gap tunability and edge properties

    International Nuclear Information System (INIS)

    Castro, Eduardo V; Santos, J M B Lopes dos; Peres, N M R; Guinea, F; Castro Neto, A H

    2008-01-01

    Bilayer graphene - two coupled single graphene layers stacked as in graphite - provides the only known semiconductor with a gap that can be tuned externally through electric field effect. Here we use a tight binding approach to study how the gap changes with the applied electric field. Within a parallel plate capacitor model and taking into account screening of the external field, we describe real back gated and/or chemically doped bilayer devices. We show that a gap between zero and midinfrared energies can be induced and externally tuned in these devices, making bilayer graphene very appealing from the point of view of applications. However, applications to nanotechnology require careful treatment of the effect of sample boundaries. This being particularly true in graphene, where the presence of edge states at zero energy - the Fermi level of the undoped system - has been extensively reported. Here we show that also bilayer graphene supports surface states localized at zigzag edges. The presence of two layers, however, allows for a new type of edge state which shows an enhanced penetration into the bulk and gives rise to band crossing phenomenon inside the gap of the biased bilayer system.

  2. The edge plasma and divertor in TIBER

    International Nuclear Information System (INIS)

    Barr, W.L.

    1987-01-01

    An open divertor configuration has been adopted for TIBER. Most recent designs, including DIII-D, NET and CIT use open configurations and rely on a dense edge plasma to shield the plasma from the gas produced at the neutralizer plate. Experiments on ASDEX, PDX, D-III, and recently on DIII-D have shown that a dense edge plasma can be produced by re-ionizing most of the gas produced at the plate. This high recycling mode allows a large flux of particles to carry the heat to the plate, so that the mean energy per particle can be low. Erosion of the plate can be greatly reduced if the average impact energy of the ions at the plate can be reduced to near or below the threshold for sputtering of the plate material. The present configuration allows part of the flux of edge plasma ions to be neutralized at the entrance to the pumping duct so that helium is pumped as well as hydrogen. 7 refs., 3 figs

  3. Scanning tunneling microscopy and spectroscopy studies of graphite edges

    International Nuclear Information System (INIS)

    Niimi, Y.; Matsui, T.; Kambara, H.; Tagami, K.; Tsukada, M.; Fukuyama, Hiroshi

    2005-01-01

    We studied experimentally and theoretically the electronic local density of states (LDOS) near single-step edges at the surface of exfoliated graphite. In scanning tunneling microscopy measurements, we observed the (3x3)R30 o and honeycomb superstructures extending over 3-4-bar nm both from the zigzag and armchair edges. Calculations based on a density-functional-derived non-orthogonal tight-binding model show that these superstructures can coexist if the two types of edges admix each other in real graphite step edges. Scanning tunneling spectroscopy measurements near the zigzag edge reveal a clear peak in the LDOS at an energy below the Fermi energy by 20-bar meV. No such a peak was observed near the armchair edge. We concluded that this peak corresponds to the 'edge state' theoretically predicted for graphene ribbons, since a similar prominent LDOS peak due to the edge state is obtained by the first principles calculations

  4. Research on reducing the edge effect in magnetorheological finishing.

    Science.gov (United States)

    Hu, Hao; Dai, Yifan; Peng, Xiaoqiang; Wang, Jianmin

    2011-03-20

    The edge effect could not be avoided in most optical manufacturing methods based on the theory of computer controlled optical surfacing. The difference between the removal function at the workpiece edge and that inside it is also the primary cause for edge effect in magnetorheological finishing (MRF). The change of physical dimension and removal ratio of the removal function is investigated through experiments. The results demonstrate that the situation is different when MRF "spot" is at the leading edge or at the trailing edge. Two methods for reducing the edge effect are put into practice after analysis of the processing results. One is adopting a small removal function for dealing with the workpiece edge, and the other is utilizing the removal function compensation. The actual processing results show that these two ways are both effective on reducing the edge effect in MRF.

  5. Environmental Dataset Gateway (EDG) CS-W Interface

    Data.gov (United States)

    U.S. Environmental Protection Agency — Use the Environmental Dataset Gateway (EDG) to find and access EPA's environmental resources. Many options are available for easily reusing EDG content in other...

  6. Urbanization impacts on mammals across urban-forest edges and a predictive model of edge effects.

    Science.gov (United States)

    Villaseñor, Nélida R; Driscoll, Don A; Escobar, Martín A H; Gibbons, Philip; Lindenmayer, David B

    2014-01-01

    With accelerating rates of urbanization worldwide, a better understanding of ecological processes at the wildland-urban interface is critical to conserve biodiversity. We explored the effects of high and low-density housing developments on forest-dwelling mammals. Based on habitat characteristics, we expected a gradual decline in species abundance across forest-urban edges and an increased decline rate in higher contrast edges. We surveyed arboreal mammals in sites of high and low housing density along 600 m transects that spanned urban areas and areas turn on adjacent native forest. We also surveyed forest controls to test whether edge effects extended beyond our edge transects. We fitted models describing richness, total abundance and individual species abundance. Low-density housing developments provided suitable habitat for most arboreal mammals. In contrast, high-density housing developments had lower species richness, total abundance and individual species abundance, but supported the highest abundances of an urban adapter (Trichosurus vulpecula). We did not find the predicted gradual decline in species abundance. Of four species analysed, three exhibited no response to the proximity of urban boundaries, but spilled over into adjacent urban habitat to differing extents. One species (Petaurus australis) had an extended negative response to urban boundaries, suggesting that urban development has impacts beyond 300 m into adjacent forest. Our empirical work demonstrates that high-density housing developments have negative effects on both community and species level responses, except for one urban adapter. We developed a new predictive model of edge effects based on our results and the literature. To predict animal responses across edges, our framework integrates for first time: (1) habitat quality/preference, (2) species response with the proximity to the adjacent habitat, and (3) spillover extent/sensitivity to adjacent habitat boundaries. This framework will

  7. Urbanization impacts on mammals across urban-forest edges and a predictive model of edge effects.

    Directory of Open Access Journals (Sweden)

    Nélida R Villaseñor

    Full Text Available With accelerating rates of urbanization worldwide, a better understanding of ecological processes at the wildland-urban interface is critical to conserve biodiversity. We explored the effects of high and low-density housing developments on forest-dwelling mammals. Based on habitat characteristics, we expected a gradual decline in species abundance across forest-urban edges and an increased decline rate in higher contrast edges. We surveyed arboreal mammals in sites of high and low housing density along 600 m transects that spanned urban areas and areas turn on adjacent native forest. We also surveyed forest controls to test whether edge effects extended beyond our edge transects. We fitted models describing richness, total abundance and individual species abundance. Low-density housing developments provided suitable habitat for most arboreal mammals. In contrast, high-density housing developments had lower species richness, total abundance and individual species abundance, but supported the highest abundances of an urban adapter (Trichosurus vulpecula. We did not find the predicted gradual decline in species abundance. Of four species analysed, three exhibited no response to the proximity of urban boundaries, but spilled over into adjacent urban habitat to differing extents. One species (Petaurus australis had an extended negative response to urban boundaries, suggesting that urban development has impacts beyond 300 m into adjacent forest. Our empirical work demonstrates that high-density housing developments have negative effects on both community and species level responses, except for one urban adapter. We developed a new predictive model of edge effects based on our results and the literature. To predict animal responses across edges, our framework integrates for first time: (1 habitat quality/preference, (2 species response with the proximity to the adjacent habitat, and (3 spillover extent/sensitivity to adjacent habitat boundaries. This

  8. Education Confronts Changing Demographics. The Challenge to Edge Cities.

    Science.gov (United States)

    Tushnet, Naida C.

    This monograph introduces a conference addressing the educational issues of the edge cities of the urban Pacific Southwest. Edge cities on the outside of urban cores (edge cities) are currently facing many of the problems formerly experienced only in urban areas. Of the 30 fastest-growing cities of over 100,000 residents in the country, 19 are…

  9. Polarimetric Edge Detector Based on the Complex Wishart Distribution

    DEFF Research Database (Denmark)

    Skriver, Henning; Schou, Jesper; Nielsen, Allan Aasbjerg

    2001-01-01

    polarimetric edge detector provides a constant false alarm rate and it utilizes the full polarimetric information. The edge detector has been applied to polarimetric SAR data from the Danish dual-frequency, airborne polarimetric SAR, EMISAR. The results show clearly an improved edge detection performance...

  10. Edge-based correlation image registration for multispectral imaging

    Science.gov (United States)

    Nandy, Prabal [Albuquerque, NM

    2009-11-17

    Registration information for images of a common target obtained from a plurality of different spectral bands can be obtained by combining edge detection and phase correlation. The images are edge-filtered, and pairs of the edge-filtered images are then phase correlated to produce phase correlation images. The registration information can be determined based on these phase correlation images.

  11. Image-Based Edge Bundles : Simplified Visualization of Large Graphs

    NARCIS (Netherlands)

    Telea, A.; Ersoy, O.

    2010-01-01

    We present a new approach aimed at understanding the structure of connections in edge-bundling layouts. We combine the advantages of edge bundles with a bundle-centric simplified visual representation of a graph's structure. For this, we first compute a hierarchical edge clustering of a given graph

  12. Gait alterations can reduce the risk of edge loading.

    Science.gov (United States)

    Wesseling, Mariska; Meyer, Christophe; De Groote, Friedl; Corten, Kristoff; Simon, Jean-Pierre; Desloovere, Kaat; Jonkers, Ilse

    2016-06-01

    Following metal-on-metal hip arthroplasty, edge loading (i.e., loading near the edge of a prosthesis cup) can increase wear and lead to early revision. The position and coverage angle of the prosthesis cup influence the risk of edge loading. This study investigates the effect of altered gait patterns, more specific hip, and pelvis kinematics, on the orientation of hip contact force and the consequent risk of antero-superior edge loading using muscle driven simulations of gait. With a cup orientation of 25° anteversion and 50° inclination and a coverage angle of 168°, many gait patterns presented risk of edge loading. Specifically at terminal double support, 189 out of 405 gait patterns indicated a risk of edge loading. At this time instant, the high hip contact forces and the proximity of the hip contact force to the edge of the cup indicated the likelihood of the occurrence of edge loading. Although the cup position contributed most to edge loading, altering kinematics considerably influenced the risk of edge loading. Increased hip abduction, resulting in decreasing hip contact force magnitude, and decreased hip extension, resulting in decreased risk on edge loading, are gait strategies that could prevent edge loading. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1069-1076, 2016. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  13. The use of edge habitats by commuting and foraging bats

    NARCIS (Netherlands)

    Verboom, B.

    1998-01-01

    Travelling routes and foraging areas of many bat species are mainly along edge habitats, such as treelines, hedgerows, forest edges, and canal banks. This thesis deals with the effects of density, configuration, and structural features of edge habitats on the occurrence of bats. Four

  14. Edge and line oriented contour detection : State of the art

    NARCIS (Netherlands)

    Papari, Giuseppe; Petkov, Nicolai

    We present an overview of various edge and line oriented approaches to contour detection that have been proposed in the last two decades. By edge and line oriented we mean methods that do not rely on segmentation. Distinction is made between edges and contours. Contour detectors are divided in local

  15. Total edge irregularity strength of (n,t)-kite graph

    Science.gov (United States)

    Winarsih, Tri; Indriati, Diari

    2018-04-01

    Let G(V, E) be a simple, connected, and undirected graph with vertex set V and edge set E. A total k-labeling is a map that carries vertices and edges of a graph G into a set of positive integer labels {1, 2, …, k}. An edge irregular total k-labeling λ :V(G)\\cup E(G)\\to \\{1,2,\\ldots,k\\} of a graph G is a labeling of vertices and edges of G in such a way that for any different edges e and f, weights wt(e) and wt(f) are distinct. The weight wt(e) of an edge e = xy is the sum of the labels of vertices x and y and the label of the edge e. The total edge irregularity strength of G, tes(G), is defined as the minimum k for which a graph G has an edge irregular total k-labeling. An (n, t)-kite graph consist of a cycle of length n with a t-edge path (the tail) attached to one vertex of a cycle. In this paper, we investigate the total edge irregularity strength of the (n, t)-kite graph, with n > 3 and t > 1. We obtain the total edge irregularity strength of the (n, t)-kite graph is tes((n, t)-kite) = \\lceil \\frac{n+t+2}{3}\\rceil .

  16. South African Identities on the Edge: Lauren Beukes's Moxyland ...

    African Journals Online (AJOL)

    We follow the work of various critics and argue that the text presents identity as fractured, riven and characterized by sharp edges. The edges in question refer to the boundaries of personal, corporeal, national and corporate identity. These edges may be considered symptomatic of the individual and social demands placed ...

  17. Bulk Versus Edge in the Quantum Hall Effect

    OpenAIRE

    Kao, Y. -C.; Lee, D. -H.

    1996-01-01

    The manifestation of the bulk quantum Hall effect on edge is the chiral anomaly. The chiral anomaly {\\it is} the underlying principle of the ``edge approach'' of quantum Hall effect. In that approach, $\\sxy$ should not be taken as the conductance derived from the space-local current-current correlation function of the pure one-dimensional edge problem.

  18. The effect of defocus on edge contrast sensitivity

    NARCIS (Netherlands)

    Jansonius, NM; Kooijman, AC

    The effect of optical blur (defocus) on edge contrast sensitivity was studied. Edge contrast sensitivity detoriates with fairly small amounts of blur (similar to 0.5 D) and is roughly reduced by half for each dioptre of blur. The effect of blur on edge contrast sensitivity equals the effect of blur

  19. How edge-reinforced random walk arises naturally

    NARCIS (Netherlands)

    Rolles, S.W.W.

    2003-01-01

    We give a characterization of a modified edge-reinforced random walk in terms of certain partially exchangeable sequences. In particular, we obtain a characterization of an edge-reinforced random walk (introduced by Coppersmith and Diaconis) on a 2-edge-connected graph. Modifying the notion of

  20. Canopy gap edge determination and the importance of gap edges for plant diversity

    Directory of Open Access Journals (Sweden)

    D. Salvador-Van Eysenrode

    2002-01-01

    Full Text Available Canopy gaps, i.e. openings in the forest cover caused by the fall of structural elements, are considered to be important for the maintenance of diversity and for the forest cycle. A gap can be considered as a young forest patch in the forest matrix, composed of interior surrounded by an edge, both enclosed by a perimeter. Much of the attention has been focused on the gap interior. However, at gap edges the spectrum of regeneration opportunities for plants may be larger than in the interior. Although definitions of gap are still discussed, any definition can describe it in an acceptable way, if justified, but defining edges is complicated and appropriate descriptors should be used. A method to determine gap interior and edge, using light as a descriptor, is presented with an example of gaps from a beech forest (Fagus sylvatica in Belgium. Also, the relevance and implications of gap edges for plant diversity and calculation of forest turnover is discussed.

  1. Implementing Edge Organizations: Exploiting Complexity. (Part 1: A Framework for the Characterization of Edge Organizations and their Environments)

    National Research Council Canada - National Science Library

    Alston, Anthony; Beautement, Patrick; Dodd, Lorraine

    2005-01-01

    ...), which would display exceptional agility. Key to implementing and employing Edge Organisations is achieving an understanding of the types of arrangements which would enable Edge Organisations to work in this manner...

  2. Are quantum spin Hall edge modes more resilient to disorder, sample geometry and inelastic scattering than quantum Hall edge modes?

    Science.gov (United States)

    Mani, Arjun; Benjamin, Colin

    2016-04-13

    On the surface of 2D topological insulators, 1D quantum spin Hall (QSH) edge modes occur with Dirac-like dispersion. Unlike quantum Hall (QH) edge modes, which occur at high magnetic fields in 2D electron gases, the occurrence of QSH edge modes is due to spin-orbit scattering in the bulk of the material. These QSH edge modes are spin-dependent, and chiral-opposite spins move in opposing directions. Electronic spin has a larger decoherence and relaxation time than charge. In view of this, it is expected that QSH edge modes will be more robust to disorder and inelastic scattering than QH edge modes, which are charge-dependent and spin-unpolarized. However, we notice no such advantage accrues in QSH edge modes when subjected to the same degree of contact disorder and/or inelastic scattering in similar setups as QH edge modes. In fact we observe that QSH edge modes are more susceptible to inelastic scattering and contact disorder than QH edge modes. Furthermore, while a single disordered contact has no effect on QH edge modes, it leads to a finite charge Hall current in the case of QSH edge modes, and thus a vanishing of the pure QSH effect. For more than a single disordered contact while QH states continue to remain immune to disorder, QSH edge modes become more susceptible--the Hall resistance for the QSH effect changes sign with increasing disorder. In the case of many disordered contacts with inelastic scattering included, while quantization of Hall edge modes holds, for QSH edge modes a finite charge Hall current still flows. For QSH edge modes in the inelastic scattering regime we distinguish between two cases: with spin-flip and without spin-flip scattering. Finally, while asymmetry in sample geometry can have a deleterious effect in the QSH case, it has no impact in the QH case.

  3. Edge responses are different in edges under natural versus anthropogenic influence: a meta-analysis using ground beetles.

    Science.gov (United States)

    Magura, Tibor; Lövei, Gábor L; Tóthmérész, Béla

    2017-02-01

    Most edges are anthropogenic in origin, but are distinguishable by their maintaining processes (natural vs. continued anthropogenic interventions: forestry, agriculture, urbanization). We hypothesized that the dissimilar edge histories will be reflected in the diversity and assemblage composition of inhabitants. Testing this "history-based edge effect" hypothesis, we evaluated published information on a common insect group, ground beetles (Coleoptera: Carabidae) in forest edges. A meta-analysis showed that the diversity-enhancing properties of edges significantly differed according to their history. Forest edges maintained by natural processes had significantly higher species richness than their interiors, while edges with continued anthropogenic influence did not. The filter function of edges was also essentially different depending on their history. For forest specialist species, edges maintained by natural processes were penetrable, allowing these species to move right through the edges, while edges still under anthropogenic interventions were impenetrable, preventing the dispersal of forest specialists out of the forest. For species inhabiting the surrounding matrix (open-habitat and generalist species), edges created by forestry activities were penetrable, and such species also invaded the forest interior. However, natural forest edges constituted a barrier and prevented the invasion of matrix species into the forest interior. Preserving and protecting all edges maintained by natural processes, and preventing anthropogenic changes to their structure, composition, and characteristics are key factors to sustain biodiversity in forests. Moreover, the increasing presence of anthropogenic edges in a landscape is to be avoided, as they contribute to the loss of biodiversity. Simultaneously, edges under continued anthropogenic disturbance should be restored by increasing habitat heterogeneity.

  4. Are quantum spin Hall edge modes more resilient to disorder, sample geometry and inelastic scattering than quantum Hall edge modes?

    International Nuclear Information System (INIS)

    Mani, Arjun; Benjamin, Colin

    2016-01-01

    On the surface of 2D topological insulators, 1D quantum spin Hall (QSH) edge modes occur with Dirac-like dispersion. Unlike quantum Hall (QH) edge modes, which occur at high magnetic fields in 2D electron gases, the occurrence of QSH edge modes is due to spin–orbit scattering in the bulk of the material. These QSH edge modes are spin-dependent, and chiral-opposite spins move in opposing directions. Electronic spin has a larger decoherence and relaxation time than charge. In view of this, it is expected that QSH edge modes will be more robust to disorder and inelastic scattering than QH edge modes, which are charge-dependent and spin-unpolarized. However, we notice no such advantage accrues in QSH edge modes when subjected to the same degree of contact disorder and/or inelastic scattering in similar setups as QH edge modes. In fact we observe that QSH edge modes are more susceptible to inelastic scattering and contact disorder than QH edge modes. Furthermore, while a single disordered contact has no effect on QH edge modes, it leads to a finite charge Hall current in the case of QSH edge modes, and thus a vanishing of the pure QSH effect. For more than a single disordered contact while QH states continue to remain immune to disorder, QSH edge modes become more susceptible—the Hall resistance for the QSH effect changes sign with increasing disorder. In the case of many disordered contacts with inelastic scattering included, while quantization of Hall edge modes holds, for QSH edge modes a finite charge Hall current still flows. For QSH edge modes in the inelastic scattering regime we distinguish between two cases: with spin-flip and without spin-flip scattering. Finally, while asymmetry in sample geometry can have a deleterious effect in the QSH case, it has no impact in the QH case. (paper)

  5. First-principles study of graphene edge properties and flake shapes

    OpenAIRE

    Gan, Chee Kwan; Srolovitz, David J.

    2009-01-01

    We use density functional theory to determine the equilibrium shape of graphene flakes, through the calculation of the edge orientation dependence of the edge energy and edge stress of graphene nanoribbons. The edge energy is a nearly linear function of edge orientation angle; increasing from the armchair orientation to the zigzag orientation. Reconstruction of the zigzag edge lowers its energy to less than that of the armchair edge. The edge stress for all edge orientations is compressive, h...

  6. A portable and independent edge fluctuation diagnostic

    International Nuclear Information System (INIS)

    Tsui, H.Y.W.; Ritz, C.P.; Wootton, A.J.

    1991-01-01

    The measurements of fluctuations and its associated transport with Langmuir probes have provided essential experimental information for some understanding of the turbulent transport. While such measurements have been conducted in the edge region of several tokamaks, only limited effort has been devoted to link and to consolidate these results: such effort can provide information for a more global understanding of the transport process. The purpose of this project is to provide a portable diagnostic facility to measure the edge turbulence on different devices, a signal processing package to analyze the data in a systematic manner and a database to consolidate the experimental results. The end product which provides a collection of information for the comparisons with the theoretical models may lead to a more global understanding of the transport process. A compact self contained portable system has been designed and developed to diagnose the edge plasma of devices with a wide range of sizes and configurations. The system is capable of measuring both the mean and the fluctuation quantities of density, temperature and potential from a standardized Langmuir probe array using a fast reciprocating probe drive. The system can also be used for other fluctuation diagnostics, such as magnetic probes, if necessary. The data acquisition and analysis is performed on a Macintosh 2fx which provides a user-friendly environment. The results obtained by the signal processing routines are stored in a tabloid format to allow comparative studies. The database is a core part of the portable signal analysis system. It allows a fast display of shot data versus each other, as well as comparison between different devices

  7. Edge Simulation Laboratory Progress and Plans

    International Nuclear Information System (INIS)

    Cohen, R

    2007-01-01

    The Edge Simulation Laboratory (ESL) is a project to develop a gyrokinetic code for MFE edge plasmas based on continuum (Eulerian) techniques. ESL is a base-program activity of OFES, with an allied algorithm research activity funded by the OASCR base math program. ESL OFES funds directly support about 0.8 FTE of career staff at LLNL, a postdoc and a small fraction of an FTE at GA, and a graduate student at UCSD. In addition the allied OASCR program funds about 1/2 FTE each in the computations directorates at LBNL and LLNL. OFES ESL funding for LLNL and UCSD began in fall 2005, while funding for GA and the math team began about a year ago. ESL's continuum approach is a complement to the PIC-based methods of the CPES Project, and was selected (1) because of concerns about noise issues associated with PIC in the high-density-contrast environment of the edge pedestal, (2) to be able to exploit advanced numerical methods developed for fluid codes, and (3) to build upon the successes of core continuum gyrokinetic codes such as GYRO, GS2 and GENE. The ESL project presently has three components: TEMPEST, a full-f, full-geometry (single-null divertor, or arbitrary-shape closed flux surfaces) code in E, μ (energy, magnetic-moment) coordinates; EGK, a simple-geometry rapid-prototype code, presently of; and the math component, which is developing and implementing algorithms for a next-generation code. Progress would be accelerated if we could find funding for a fourth, computer science, component, which would develop software infrastructure, provide user support, and address needs for data handing and analysis. We summarize the status and plans for the three funded activities

  8. Two-Dimensional Edge Detection by Guided Mode Resonant Metasurface

    Science.gov (United States)

    Saba, Amirhossein; Tavakol, Mohammad Reza; Karimi-Khoozani, Parisa; Khavasi, Amin

    2018-05-01

    In this letter, a new approach to perform edge detection is presented using an all-dielectric CMOS-compatible metasurface. The design is based on guided-mode resonance which provides a high quality factor resonance to make the edge detection experimentally realizable. The proposed structure that is easy to fabricate, can be exploited for detection of edges in two dimensions due to its symmetry. Also, the trade-off between gain and resolution of edge detection is discussed which can be adjusted by appropriate design parameters. The proposed edge detector has also the potential to be used in ultrafast analog computing and image processing.

  9. Orientations of infinite graphs with prescribed edge-connectivity

    DEFF Research Database (Denmark)

    Thomassen, Carsten

    2016-01-01

    We prove a decomposition result for locally finite graphs which can be used to extend results on edge-connectivity from finite to infinite graphs. It implies that every 4k-edge-connected graph G contains an immersion of some finite 2k-edge-connected Eulerian graph containing any prescribed vertex...... set (while planar graphs show that G need not containa subdivision of a simple finite graph of large edge-connectivity). Also, every 8k-edge connected infinite graph has a k-arc-connected orientation, as conjectured in 1989....

  10. Antichiral Edge States in a Modified Haldane Nanoribbon

    Science.gov (United States)

    Colomés, E.; Franz, M.

    2018-02-01

    Topological phases of fermions in two dimensions are often characterized by chiral edge states. By definition, these propagate in opposite directions at the two parallel edges when the sample geometry is that of a rectangular strip. We introduce here a model which exhibits what we call "antichiral" edge modes. These propagate in the same direction at both parallel edges of the strip and are compensated by counterpropagating modes that reside in the bulk. General arguments and numerical simulations show that backscattering is suppressed even when strong disorder is present in the system. We propose a feasible experimental realization of a system showing such antichiral edge modes in transition metal dichalcogenide monolayers.

  11. Ion transport in turbulent edge plasmas

    International Nuclear Information System (INIS)

    Helander, P.; Massachusetts Inst. of Tech., Cambridge, MA; Hazeltine, R.D.; Catto, P.J.

    1996-02-01

    Edge plasmas, such as the tokamak scrape-off layer, exist as a consequence of a balance between cross-field diffusion and parallel losses. The former is usually anomalous, and is widely thought to be driven by strong electrostatic turbulence. It is shown that the anomalous diffusion affects the parallel ion transport by giving rise to a new type of thermal force between different ion species. This force is parallel to the magnetic field, but arises entirely because of perpendicular gradients, and could be important for impurity retention in the tokamak divertor. (author)

  12. Modification of tokamak edge turbulence using feedback

    International Nuclear Information System (INIS)

    Richards, B.; Uckan, T.; Wootton, A.J.; Carreras, B.A.; Bengtson, R.D.; Hurwitz, P.; Li, G.X.; Lin, H.; Rowan, W.L.; Tsui, H.Y.W.; Sen, A.K.; Uglum, J.

    1994-01-01

    Using active feedback, the turbulent fluctuation levels have been reduced by as much as a factor of 2 in the edge of the Texas Experimental Tokamak (TEXT) [K. W. Gentle, Nucl. Fusion Technol. 1, 479 (1981)]. A probe system was used to drive a suppressor wave in the TEXT limiter shadow. A decrease in the local turbulence-induced particle flux has been seen, but a global change in the particle transport at the present time has not been observed. By changing the phase shift and gain of the feedback network, the amplitude of the turbulence was increased by a factor of 10

  13. Tensor voting for robust color edge detection

    OpenAIRE

    Moreno, Rodrigo; García, Miguel Ángel; Puig, Domenec

    2014-01-01

    The final publication is available at Springer via http://dx.doi.org/10.1007/978-94-007-7584-8_9 This chapter proposes two robust color edge detection methods based on tensor voting. The first method is a direct adaptation of the classical tensor voting to color images where tensors are initialized with either the gradient or the local color structure tensor. The second method is based on an extension of tensor voting in which the encoding and voting processes are specifically tailored to ...

  14. Refining Nodes and Edges of State Machines

    DEFF Research Database (Denmark)

    Hallerstede, Stefan; Snook, Colin

    2011-01-01

    State machines are hierarchical automata that are widely used to structure complex behavioural specifications. We develop two notions of refinement of state machines, node refinement and edge refinement. We compare the two notions by means of examples and argue that, by adopting simple conventions...... refinement theory and UML-B state machine refinement influences the style of node refinement. Hence we propose a method with direct proof of state machine refinement avoiding the detour via Event-B that is needed by UML-B....

  15. Viscosity in the edge of tokamak plasmas

    International Nuclear Information System (INIS)

    Stacey, W.M.

    1993-05-01

    A fluid representation of viscosity has been incorporated into a set of fluid equations that are maximally ordered in the ''short-radial-gradient-scale-length'' (srgsl) ordering that is appropriate for the edge of tokamak plasmas. The srgsl ordering raises viscous drifts and other viscous terms to leading order and fundamentally alters the character of the fluid equations. A leasing order viscous drift is identified. Viscous-driven radial particle and energy fluxes in the scrape-off layer and divertor channel are estimated to have an order unity effect in reducing radial peaking of energy fluxes transported along the field lines to divertor collector plates

  16. Plasma Edge Control in Tore Supra

    International Nuclear Information System (INIS)

    Evans, T.E.; Mioduszewski, P.K.; Foster, C.; Haste, G.; Horton, L.; Grosman, A.; Ghendrih, P.; Chatelier, M.; Capes, H.; Michelis, C. De; Fall, T.; Geraud, A.; Grisolia, C.; Guilhem, D.; Hutter, T.

    1990-01-01

    TORE SUPRA is a large superconducting tokamak designed for sustaining long inductive pulses (t∼ 30 s). In particular, all the first wall components have been designed for steady-state heat and particle exhaust, particle injection, and additional heating. In addition to these technological assets, a strict control of the plasma-wall interactions is required. This has been done at low power: experiments with ohmic heating have been mainly devoted to the pump limiter, ergodic divertor and pellet injection experiments. Some specific problems arising in large tokamaks are encountered; the pump limiter and the ergodic divertor yield the expected effects on the plasma edge. The effects on the bulk are discussed

  17. Laser Surface Hardening of Groove Edges

    Science.gov (United States)

    Hussain, A.; Hamdani, A. H.; Akhter, R.; Aslam, M.

    2013-06-01

    Surface hardening of groove-edges made of 3Cr13 Stainless Steel has been carried out using 500 W CO2 laser with a rectangular beam of 2.5×3 mm2. The processing speed was varied from 150-500 mm/min. It was seen that the hardened depth increases with increase in laser interaction time. A maximum hardened depth of around 1mm was achieved. The microhardness of the transformed zone was 2.5 times the hardness of base metal. The XRD's and microstructural analysis were also reported.

  18. Bending energy of buckled edge dislocations

    Science.gov (United States)

    Kupferman, Raz

    2017-12-01

    The study of elastic membranes carrying topological defects has a longstanding history, going back at least to the 1950s. When allowed to buckle in three-dimensional space, membranes with defects can totally relieve their in-plane strain, remaining with a bending energy, whose rigidity modulus is small compared to the stretching modulus. In this paper we study membranes with a single edge dislocation. We prove that the minimum bending energy associated with strain-free configurations diverges logarithmically with the size of the system.

  19. A competitive edge in France around EDF?

    International Nuclear Information System (INIS)

    Glachant, J.M.; Saguan, M.

    2006-01-01

    The French electric reform displays a rather particular case of creation of a competitive market around a former very large integrated monopoly that retains all of its industrial assets. This new market is growing like a competitive edge around the former monopoly The prevailing operator, which has mainly nuclear and hydraulic production equipment, could withstand all pressures from competitors during the initial price decrease phase, without openly abusing its market power. As a result, apart from the hypothesis of gigantic public offerings, the French market trend towards an ordinary competitive system does not seem likely to happen soon or spontaneously. (authors)

  20. Near edge x-ray spectroscopy theory

    International Nuclear Information System (INIS)

    1994-01-01

    We propose to develop a quantitative theory of x-ray spectroscopies in the near edge region, within about 100 eV of threshold. These spectroscopies include XAFS (X-ray absorption fine structure), photoelectron diffraction (PD), and diffraction anomalous fine structure (DAFS), all of which are important tools for structural studies using synchrotron radiation x-ray sources. Of primary importance in these studies are many-body effects, such as the photoelectron self-energy, and inelastic losses. A better understanding of these quantities is needed to obtain theories without adjustable parameters. We propose both analytical and numerical calculations, the latter based on our x-ray spectroscopy codes FEFF

  1. Thermal physics of transition edge sensor arrays

    International Nuclear Information System (INIS)

    Hoevers, H.F.C.

    2006-01-01

    Thermal transport in transition edge sensor (TES)-based microcalorimeter arrays is reviewed. The fundamentals of thermal conductance in Si 3 N 4 membranes are discussed and the magnitude of the electron-phonon coupling and Kapitza coupling in practical devices is summarized. Next, the thermal transport in high-stopping power and low-heat capacity absorbers, required for arrays of TES microcalorimeters, is discussed in combination with a performance analysis of detectors with mushroom-absorbers. Finally, the phenomenology of unexplained excess noise, observed in both Mo- and Ti-based TESs, is briefly summarized and related with the coupling of the TES to the heat bath

  2. Flow Control Over Sharp-Edged Wings

    Science.gov (United States)

    2007-07-01

    Gad-el-Hak (2001) as the ability to actively or passively manipulate a flow field to effect a desired change. The challenge is to achieve that change...combinations. Been able to independently control both is a great challenge . These requirements may appear too stringent for the sharp- edged airfoils...06 0𔄁 08 09 lic Vlc Figure 22: Pressure distributions for Model B at a=13 °. Stations I (left); 2 (right) 1 , -2 1 F - [12 1 -6a -16 08 -08 06 -06

  3. Green's function asymptotics near the internal edges of spectra of periodic elliptic operators. Spectral edge case

    KAUST Repository

    Kuchment, Peter

    2012-06-21

    Precise asymptotics known for the Green\\'s function of the Laplace operator have found their analogs for periodic elliptic operators of the second order at and below the bottom of the spectrum. Due to the band-gap structure of the spectra of such operators, the question arises whether similar results can be obtained near or at the edges of spectral gaps. As the result of this work shows, this is possible at a spectral edge when the dimension d ≥ 3. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Green's function asymptotics near the internal edges of spectra of periodic elliptic operators. Spectral edge case

    KAUST Repository

    Kuchment, Peter; Raich, Andrew

    2012-01-01

    Precise asymptotics known for the Green's function of the Laplace operator have found their analogs for periodic elliptic operators of the second order at and below the bottom of the spectrum. Due to the band-gap structure of the spectra of such operators, the question arises whether similar results can be obtained near or at the edges of spectral gaps. As the result of this work shows, this is possible at a spectral edge when the dimension d ≥ 3. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Magnetotransport Properties of Graphene Nanoribbons with Zigzag Edges

    Science.gov (United States)

    Wu, Shuang; Liu, Bing; Shen, Cheng; Li, Si; Huang, Xiaochun; Lu, Xiaobo; Chen, Peng; Wang, Guole; Wang, Duoming; Liao, Mengzhou; Zhang, Jing; Zhang, Tingting; Wang, Shuopei; Yang, Wei; Yang, Rong; Shi, Dongxia; Watanabe, Kenji; Taniguchi, Takashi; Yao, Yugui; Wang, Weihua; Zhang, Guangyu

    2018-05-01

    The determination of the electronic structure by edge geometry is unique to graphene. In theory, an evanescent nonchiral edge state is predicted at the zigzag edges of graphene. Up to now, the approach used to study zigzag-edged graphene has mostly been limited to scanning tunneling microscopy. The transport properties have not been revealed. Recent advances in hydrogen plasma-assisted "top-down" fabrication of zigzag-edged graphene nanoribbons (Z-GNRs) have allowed us to investigate edge-related transport properties. In this Letter, we report the magnetotransport properties of Z-GNRs down to ˜70 nm wide on an h -BN substrate. In the quantum Hall effect regime, a prominent conductance peak is observed at Landau ν =0 , which is absent in GNRs with nonzigzag edges. The conductance peak persists under perpendicular magnetic fields and low temperatures. At a zero magnetic field, a nonlocal voltage signal, evidenced by edge conduction, is detected. These prominent transport features are closely related to the observable density of states at the hydrogen-etched zigzag edge of graphene probed by scanning tunneling spectroscopy, which qualitatively matches the theoretically predicted electronic structure for zigzag-edged graphene. Our study gives important insights for the design of new edge-related electronic devices.

  6. Measuring the Edge Recombination Velocity of Monolayer Semiconductors.

    Science.gov (United States)

    Zhao, Peida; Amani, Matin; Lien, Der-Hsien; Ahn, Geun Ho; Kiriya, Daisuke; Mastandrea, James P; Ager, Joel W; Yablonovitch, Eli; Chrzan, Daryl C; Javey, Ali

    2017-09-13

    Understanding edge effects and quantifying their impact on the carrier properties of two-dimensional (2D) semiconductors is an essential step toward utilizing this material for high performance electronic and optoelectronic devices. WS 2 monolayers patterned into disks of varying diameters are used to experimentally explore the influence of edges on the material's optical properties. Carrier lifetime measurements show a decrease in the effective lifetime, τ effective , as a function of decreasing diameter, suggesting that the edges are active sites for carrier recombination. Accordingly, we introduce a metric called edge recombination velocity (ERV) to characterize the impact of 2D material edges on nonradiative carrier recombination. The unpassivated WS 2 monolayer disks yield an ERV ∼ 4 × 10 4 cm/s. This work quantifies the nonradiative recombination edge effects in monolayer semiconductors, while simultaneously establishing a practical characterization approach that can be used to experimentally explore edge passivation methods for 2D materials.

  7. Plasmons on the edge of MoS2 nanostructures

    DEFF Research Database (Denmark)

    Andersen, Kirsten; Jacobsen, Karsten Wedel; Thygesen, Kristian Sommer

    2014-01-01

    Using ab initio calculations we predict the existence of one-dimensional (1D), atomically confined plasmons at the edges of a zigzag MoS2 nanoribbon. The strongest plasmon originates from a metallic edge state localized on the sulfur dimers decorating the Mo edge of the ribbon. A detailed analysis...... of the dielectric function reveals that the observed deviations from the ideal 1D plasmon behavior result from single-particle transitions between the metallic edge state and the valence and conduction bands of the MoS2 sheet. The Mo and S edges of the ribbon are clearly distinguishable in calculated spatially...... resolved electron energy loss spectrum owing to the different plasmonic properties of the two edges. The edge plasmons could potentially be utilized for tuning the photocatalytic activity of MoS2 nanoparticles....

  8. Slim edges in double-sided silicon 3D detectors

    International Nuclear Information System (INIS)

    Povoli, M; Dalla Betta, G-F; Bagolini, A; Boscardin, M; Giacomini, G; Vianello, E; Zorzi, N

    2012-01-01

    Minimization of the insensitive edge area is one of the key requirements for silicon radiation detectors to be used in future silicon trackers. In 3D detectors this goal can be achieved with the active edge, at the expense of a high fabrication process complexity. In the framework of the ATLAS 3D sensor collaboration, we produced modified 3D silicon sensors with a double-sided technology. While this approach is not suitable to obtain active edges, because it does not use a support wafer, it allows for a new type of edge termination, the slim edge. In this paper we report on the development of the slim edge, from numerical simulations to design and testing, proving that it works effectively without increasing the fabrication complexity of silicon 3D detectors, and that it could be further optimized to reduce the insensitive edge region to less than 100 μm.

  9. Local Thermometry of Neutral Modes on the Quantum Hall Edge

    Science.gov (United States)

    Hart, Sean; Venkatachalam, Vivek; Pfeiffer, Loren; West, Ken; Yacoby, Amir

    2012-02-01

    A system of electrons in two dimensions and strong magnetic fields can be tuned to create a gapped 2D system with one dimensional channels along the edge. Interactions among these edge modes can lead to independent transport of charge and heat, even in opposite directions. Measuring the chirality and transport properties of these charge and heat modes can reveal otherwise hidden structure in the edge. Here, we heat the outer edge of such a quantum Hall system using a quantum point contact. By placing quantum dots upstream and downstream along the edge of the heater, we can measure both the chemical potential and temperature of that edge to study charge and heat transport, respectively. We find that charge is transported exclusively downstream, but heat can be transported upstream when the edge has additional structure related to fractional quantum Hall physics.

  10. Aerodynamic Analysis of Trailing Edge Enlarged Wind Turbine Airfoils

    DEFF Research Database (Denmark)

    Xu, Haoran; Shen, Wen Zhong; Zhu, Wei Jun

    2014-01-01

    characteristics of blunt trailing edge airfoils are caused by blunt body vortices at low angles of attack, and by the combined effect of separation and blunt body vortices at large angles of attack. With the increase of thickness of blunt trailing edge, the vibration amplitudes of lift and drag curves increase......The aerodynamic performance of blunt trailing edge airfoils generated from the DU- 91-W2-250, DU-97-W-300 and DU-96-W-350 airfoils by enlarging the thickness of trailing edge symmetrically from the location of maximum thickness to chord to the trailing edge were analyzed by using CFD and RFOIL...... methods at a chord Reynolds number of 3 × 106. The goal of this study is to analyze the aerodynamic performance of blunt trailing edge airfoils with different thicknesses of trailing edge and maximum thicknesses to chord. The steady results calculated by the fully turbulent k-ω SST, transitional k-ω SST...

  11. Using new edges for anomaly detection in computer networks

    Science.gov (United States)

    Neil, Joshua Charles

    2015-05-19

    Creation of new edges in a network may be used as an indication of a potential attack on the network. Historical data of a frequency with which nodes in a network create and receive new edges may be analyzed. Baseline models of behavior among the edges in the network may be established based on the analysis of the historical data. A new edge that deviates from a respective baseline model by more than a predetermined threshold during a time window may be detected. The new edge may be flagged as potentially anomalous when the deviation from the respective baseline model is detected. Probabilities for both new and existing edges may be obtained for all edges in a path or other subgraph. The probabilities may then be combined to obtain a score for the path or other subgraph. A threshold may be obtained by calculating an empirical distribution of the scores under historical conditions.

  12. Edge states in quantum Hall effect in graphene

    International Nuclear Information System (INIS)

    Gusynin, V.P.; Miransky, V.A.; Sharapov, S.G.; Shovkovy, I.A.

    2008-01-01

    We review recent results concerning the spectrum of edge states in the quantum Hall effect in graphene. In particular, special attention is paid to the derivation of the conditions under which gapless edge states exist in the spectrum of graphene with 'zigzag' and 'armchair' edges. It is found that in the case of a half-plane or a ribbon with zigzag edges, there are gapless edge states only when a spin gap dominates over a Dirac mass gap. In the case of a half-plane with an armchair edge, the existence of the gapless edge states depends on the specific type of Dirac mass gaps. The implications of these results for the dynamics in the quantum Hall effect in graphene are discussed

  13. Implementation of a worksite educational program focused on promoting healthy eating habits [v2; ref status: indexed, http://f1000r.es/32x

    Directory of Open Access Journals (Sweden)

    Dimitra Tanagra

    2014-03-01

    Full Text Available Objective: To estimate the effectiveness of a short-term educational-counseling worksite program focused on lipid intake, by monitoring the possible change on nutrition knowledge and eating habits. Methods: an 8-week educational program based on the Health Belief Model was implemented in a honey packaging and sales company in Greece. 20 out of the 29 employees initially enrolled completed the program. Knowledge level and eating habits were evaluated prior and after the intervention by the “Nutrition Knowledge Questionnaire” and the “Food Habits Questionnaire”. ANOVA, Spearman rho test and paired Wilcoxon test were employed in statistical analysis. Results: Non smokers and those with higher educational level had healthier eating habits. Knowledge following the intervention was significantly improved concerning recommendations and basic food ingredients but as far as eating habits were concerned, scores were not improved significantly, while intake of fried food was increased. Conclusions and Implications: Short-term interventions may produce substantial improvement in knowledge but not necessarily modifications in unhealthy eating habits.

  14. CVD Prevention Through Policy: a Review of Mass Media, Food/Menu Labeling, Taxation/Subsidies, Built Environment, School Procurement, Worksite Wellness, and Marketing Standards to Improve Diet.

    Science.gov (United States)

    Afshin, Ashkan; Penalvo, Jose; Del Gobbo, Liana; Kashaf, Michael; Micha, Renata; Morrish, Kurtis; Pearson-Stuttard, Jonathan; Rehm, Colin; Shangguan, Siyi; Smith, Jessica D; Mozaffarian, Dariush

    2015-11-01

    Poor diet is the leading cause of cardiovascular disease in the USA and globally. Evidence-based policies are crucial to improve diet and population health. We reviewed the effectiveness for a range of policy levers to alter diet and diet-related risk factors. We identified evidence to support benefits of focused mass media campaigns (especially for fruits, vegetables, salt), food pricing strategies (both subsidies and taxation, with stronger effects at lower income levels), school procurement policies (for increasing healthful or reducing unhealthful choices), and worksite wellness programs (especially when comprehensive and multicomponent). Evidence was inconclusive for food and menu labeling (for consumer or industry behavior) and changes in local built environment (e.g., availability or accessibility of supermarkets, fast food outlets). We found little empiric evidence evaluating marketing restrictions, although broad principles and large resources spent on marketing suggest utility. Widespread implementation and evaluation of evidence-based policy strategies, with further research on other strategies with mixed/limited evidence, are essential "population medicine" to reduce health and economic burdens and inequities of diet-related illness worldwide.

  15. Converging social classes through humanized urban edges

    Science.gov (United States)

    Abuan, M. V.; Galingan, Z. D.

    2017-10-01

    Urban open spaces are created to be used by people. It is a place of convergence and social activity. However, these places have transformed into places of divergence. When spaces become dehumanized, it separates social classes. As a result, underused spaces contribute to urban decay. Particularly an urban edge, the JP Rizal Makati Waterfront Area is the center of this paper. The JP Rizal Makati Waterfront Area is a waterfront development situated along the banks of one of Metro Manila’s major water thoroughfare --- Pasig River. The park and its physical form, urban design and landscape tend to deteriorate over time --- creating a further division of social convergence. Social hostility, crime, negligent maintenance and poor urban design are contributing factors to this sprawling decay in what used to be spaces of bringing people together. Amidst attempts to beautify and renew this portion of Makati City’s edge, the urban area still remains misspent.This paper attempts to re-humanize the waterfront development. It uses the responsive environment design principles to be able to achieve this goal.

  16. Edge detection and texture classification by cuttlefish.

    Science.gov (United States)

    Zylinski, Sarah; Osorio, Daniel; Shohet, Adam J

    2009-12-14

    Cephalopod mollusks including octopus and cuttlefish are adept at adaptive camouflage, varying their appearance to suit the surroundings. This behavior allows unique access into the vision of a non-human species because one can ask how these animals use spatial information to control their coloration pattern. There is particular interest in factors that affect the relative levels of expression of the Mottle and the Disruptive body patterns. Broadly speaking, the Mottle is displayed on continuous patterned surfaces whereas the Disruptive is used on discrete objects such as pebbles. Recent evidence from common cuttlefish, Sepia officinalis, suggests that multiple cues are relevant, including spatial scale, contrast, and depth. We analyze the body pattern responses of juvenile cuttlefish to a range of checkerboard stimuli. Our results suggest that the choice of camouflage pattern is consistent with a simple model of how cuttlefish classify visual textures, according to whether they are Uniform or patterned, and whether the pattern includes visual edges. In particular, cuttlefish appear to detect edges by sensing the relative spatial phases of two spatial frequency components (e.g., fundamental and the third harmonic Fourier component in a square wave). We discuss the relevance of these findings to vision and camouflage in aquatic environments.

  17. Edge plasma fluctuations in STOR-M

    International Nuclear Information System (INIS)

    Zhang, W.; Hirose, A.; Zhang, L.; Xiao, C.; Conway, G.D.; Skarsgard, H.M.

    1993-01-01

    In the STOR-M tokamak, the coherence and propagation nature of the density (n e ) and magnetic (B r ) fluctuations are investigated both in the scrape-off layer (SOL, r/a > 1) and at the plasma edge (r/a -2 is of the order of the reverse electron skin depth kθ ≅ ω pe /c. In terms of the hybrid ion Larmor radius ρ s = c s /Ω i , it corresponds to k θρ s ≅ 0.1. These observations support the skin size electromagnetic drift mode which predicts that a low β tokamak discharge is unstable against the skin size electromagnetic instability with a phase velocity significantly smaller than the electron diamagnetic drift velocity. Edge fluctuations observed in STOR-M appear to propagate at the local E x B drift, and the phase velocity in the plasma from is υ theta ≅ 5 x 10 4 cm/sec, compared with the local electron diamagnetic drift, υ e ≅ 2.5 x 10 5 cm/sec. In the SOL region, the density fluctuations propagate in the ion diamagnetic drift, but still with the local E x B drift because E r changes its sign at r/a ≅ 1

  18. LES tests on airfoil trailing edge serration

    International Nuclear Information System (INIS)

    Zhu, Wei Jun; Shen, Wen Zhong

    2016-01-01

    In the present study, a large number of acoustic simulations are carried out for a low noise airfoil with different Trailing Edge Serrations (TES). The Ffowcs Williams-Hawkings (FWH) acoustic analogy is used for noise prediction at trailing edge. The acoustic solver is running on the platform of our in-house incompressible flow solver EllipSys3D. The flow solution is first obtained from the Large Eddy Simulation (LES), the acoustic part is then carried out based on the instantaneous hydrodynamic pressure and velocity field. To obtain the time history data of sound pressure, the flow quantities are integrated around the airfoil surface through the FWH approach. For all the simulations, the chord based Reynolds number is around 1.5x10 6 . In the test matrix, the effects from angle of attack, the TE flap angle, the length/width of the TES are investigated. Even though the airfoil under investigation is already optimized for low noise emission, most numerical simulations and wind tunnel experiments show that the noise level is further decreased by adding the TES device. (paper)

  19. Photon Counting Using Edge-Detection Algorithm

    Science.gov (United States)

    Gin, Jonathan W.; Nguyen, Danh H.; Farr, William H.

    2010-01-01

    New applications such as high-datarate, photon-starved, free-space optical communications require photon counting at flux rates into gigaphoton-per-second regimes coupled with subnanosecond timing accuracy. Current single-photon detectors that are capable of handling such operating conditions are designed in an array format and produce output pulses that span multiple sample times. In order to discern one pulse from another and not to overcount the number of incoming photons, a detection algorithm must be applied to the sampled detector output pulses. As flux rates increase, the ability to implement such a detection algorithm becomes difficult within a digital processor that may reside within a field-programmable gate array (FPGA). Systems have been developed and implemented to both characterize gigahertz bandwidth single-photon detectors, as well as process photon count signals at rates into gigaphotons per second in order to implement communications links at SCPPM (serial concatenated pulse position modulation) encoded data rates exceeding 100 megabits per second with efficiencies greater than two bits per detected photon. A hardware edge-detection algorithm and corresponding signal combining and deserialization hardware were developed to meet these requirements at sample rates up to 10 GHz. The photon discriminator deserializer hardware board accepts four inputs, which allows for the ability to take inputs from a quadphoton counting detector, to support requirements for optical tracking with a reduced number of hardware components. The four inputs are hardware leading-edge detected independently. After leading-edge detection, the resultant samples are ORed together prior to deserialization. The deserialization is performed to reduce the rate at which data is passed to a digital signal processor, perhaps residing within an FPGA. The hardware implements four separate analog inputs that are connected through RF connectors. Each analog input is fed to a high-speed 1

  20. Frequencies of the Edge-Magnetoplasmon Excitations in Gated Quantum Hall Edges

    Science.gov (United States)

    Endo, Akira; Koike, Keita; Katsumoto, Shingo; Iye, Yasuhiro

    2018-06-01

    We have investigated microwave transmission through the edge of quantum Hall systems by employing a coplanar waveguide (CPW) fabricated on the surface of a GaAs/AlGaAs two-dimensional electron gas (2DEG) wafer. An edge is introduced to the slot region of the CPW by applying a negative bias Vg to the central electrode (CE) and depleting the 2DEG below the CE. We observe peaks attributable to the excitation of edge magnetoplasmons (EMP) at a fundamental frequency f0 and at its harmonics if0 (i = 2,3, \\ldots ). The frequency f0 increases with decreasing Vg, indicating that EMP propagates with higher velocity for more negative Vg. The dependence of f0 on Vg is interpreted in terms of the variation in the distance between the edge state and the CE, which alters the velocity by varying the capacitive coupling between them. The peaks are observed to continue, albeit with less clarity, up to the regions of Vg where 2DEG still remains below the CE.