WorldWideScience

Sample records for trait-dependent community disassembly

  1. Purple pitcher plant (Sarracenia rosea Dieback and partial community disassembly following experimental storm surge in a coastal pitcher plant bog.

    Directory of Open Access Journals (Sweden)

    Matthew J Abbott

    Full Text Available Sea-level rise and frequent intense hurricanes associated with climate change will result in recurrent flooding of inland systems such as Gulf Coastal pitcher plant bogs by storm surges. These surges can transport salt water and sediment to freshwater bogs, greatly affecting their biological integrity. Purple pitcher plants (Sarracenia rosea are Gulf Coast pitcher plant bog inhabitants that could be at a disadvantage under this scenario because their pitcher morphology may leave them prone to collection of saline water and sediment after a surge. We investigated the effects of storm surge water salinity and sediment type on S. rosea vitality, plant community structure, and bog soil-water conductivity. Plots (containing ≥1 ramet of S. rosea were experimentally flooded with fresh or saline water crossed with one of three sediment types (local, foreign, or no sediment. There were no treatment effects on soil-water conductivity; nevertheless, direct exposure to saline water resulted in significantly lower S. rosea cover until the following season when a prescribed fire and regional drought contributed to the decline of all the S. rosea to near zero percent cover. There were also significant differences in plant community structure between treatments over time, reflecting how numerous species increased in abundance and a few species decreased in abundance. However, in contrast to S. rosea, most of the other species in the community appeared resilient to the effects of storm surge. Thus, although the community may be somewhat affected by storm surge, those few species that are particularly sensitive to the storm surge disturbance will likely drop out of the community and be replaced by more resilient species. Depending on the longevity of these biological legacies, Gulf Coastal pitcher plant bogs may be incapable of fully recovering if they become exposed to storm surge more frequently due to climate change.

  2. Design for Disassembly

    DEFF Research Database (Denmark)

    Beim, Anne

    2018-01-01

    ‘Design for Disassembly’ is becoming a familiar part of discourses on environmental strategies for construction and sustainable design. The concept originates in industrial design and pertains to a wide range of strategies for reuse and recycling, all of which highlight a whole-of-life approach t...... to materials and buildings. Design for Disassembly is particularly relevant to prefabricated and industrialized construction; as such methodologies already contain within them the possibility for easy deconstruction, whether for maintenance, refurbishment or reuse....

  3. Retention of habitat complexity minimizes disassembly of reef fish communities following disturbance: a large-scale natural experiment.

    Directory of Open Access Journals (Sweden)

    Michael J Emslie

    Full Text Available High biodiversity ecosystems are commonly associated with complex habitats. Coral reefs are highly diverse ecosystems, but are under increasing pressure from numerous stressors, many of which reduce live coral cover and habitat complexity with concomitant effects on other organisms such as reef fishes. While previous studies have highlighted the importance of habitat complexity in structuring reef fish communities, they employed gradient or meta-analyses which lacked a controlled experimental design over broad spatial scales to explicitly separate the influence of live coral cover from overall habitat complexity. Here a natural experiment using a long term (20 year, spatially extensive (∼ 115,000 kms(2 dataset from the Great Barrier Reef revealed the fundamental importance of overall habitat complexity for reef fishes. Reductions of both live coral cover and habitat complexity had substantial impacts on fish communities compared to relatively minor impacts after major reductions in coral cover but not habitat complexity. Where habitat complexity was substantially reduced, species abundances broadly declined and a far greater number of fish species were locally extirpated, including economically important fishes. This resulted in decreased species richness and a loss of diversity within functional groups. Our results suggest that the retention of habitat complexity following disturbances can ameliorate the impacts of coral declines on reef fishes, so preserving their capacity to perform important functional roles essential to reef resilience. These results add to a growing body of evidence about the importance of habitat complexity for reef fishes, and represent the first large-scale examination of this question on the Great Barrier Reef.

  4. AGC-2 Disassembly Report

    Energy Technology Data Exchange (ETDEWEB)

    William Windes

    2014-05-01

    The Next Generation Nuclear Plant (NGNP) Graphite Research and Development (R&D) Program is currently measuring irradiated material properties for predicting the behavior and operating performance of new nuclear graphite grades available for use within the cores of new very high temperature reactor designs. The Advanced Graphite Creep (AGC) experiment, consisting of six irradiation capsules, will generate irradiated graphite performance data for NGNP reactor operating conditions. The AGC experiment is designed to determine the changes to specific material properties such as thermal diffusivity, thermal expansion, elastic modulus, mechanical strength, irradiation induced dimensional change rate, and irradiation creep for a wide variety of nuclear grade graphite types over a range of high temperature, and moderate doses. A series of six capsules containing graphite test specimens will be used to expose graphite test samples to a dose range from 1 to 7 dpa at three different temperatures (600, 900, and 1200°C) as described in the Graphite Technology Development Plan. Since irradiation induced creep within graphite components is considered critical to determining the operational life of the graphite core, some of the samples will also be exposed to an applied load to determine the creep rate for each graphite type under both temperature and neutron flux. All six AGC capsules in the experiment will be irradiated in the Advanced Test Reactor (ATR). AGC-1 and AGC-2 will be irradiated in the south flux trap and AGC-3–AGC-6 will be irradiated in the east flux trap. The change in flux traps is due to NGNP irradiation priorities requiring the AGC experiment to be moved to accommodate Fuel irradiation experiments. After irradiation, all six AGC capsules will be cooled in the ATR Canal, sized for shipment, and shipped to the Materials and Fuels Complex (MFC) where the capsule will be disassembled in the Hot Fuel Examination Facility (HFEF). During disassembly, the metallic

  5. Simulation-based disassembly systems design

    Science.gov (United States)

    Ohlendorf, Martin; Herrmann, Christoph; Hesselbach, Juergen

    2004-02-01

    Recycling of Waste of Electrical and Electronic Equipment (WEEE) is a matter of actual concern, driven by economic, ecological and legislative reasons. Here, disassembly as the first step of the treatment process plays a key role. To achieve sustainable progress in WEEE disassembly, the key is not to limit analysis and planning to merely disassembly processes in a narrow sense, but to consider entire disassembly plants including additional aspects such as internal logistics, storage, sorting etc. as well. In this regard, the paper presents ways of designing, dimensioning, structuring and modeling different disassembly systems. Goal is to achieve efficient and economic disassembly systems that allow recycling processes complying with legal requirements. Moreover, advantages of applying simulation software tools that are widespread and successfully utilized in conventional industry sectors are addressed. They support systematic disassembly planning by means of simulation experiments including consecutive efficiency evaluation. Consequently, anticipatory recycling planning considering various scenarios is enabled and decisions about which types of disassembly systems evidence appropriateness for specific circumstances such as product spectrum, throughput, disassembly depth etc. is supported. Furthermore, integration of simulation based disassembly planning in a holistic concept with configuration of interfaces and data utilization including cost aspects is described.

  6. Herbivores rescue diversity in warming tundra by modulating trait-dependent species losses and gains.

    Science.gov (United States)

    Kaarlejärvi, Elina; Eskelinen, Anu; Olofsson, Johan

    2017-09-04

    Climate warming is altering the diversity of plant communities but it remains unknown which species will be lost or gained under warming, especially considering interactions with other factors such as herbivory and nutrient availability. Here, we experimentally test effects of warming, mammalian herbivory and fertilization on tundra species richness and investigate how plant functional traits affect losses and gains. We show that herbivory reverses the impact of warming on diversity: in the presence of herbivores warming increases species richness through higher species gains and lower losses, while in the absence of herbivores warming causes higher species losses and thus decreases species richness. Herbivores promote gains of short-statured species under warming, while herbivore removal and fertilization increase losses of short-statured and resource-conservative species through light limitation. Our results demonstrate that both rarity and traits forecast species losses and gains, and mammalian herbivores are essential for preventing trait-dependent extinctions and mitigate diversity loss under warming and eutrophication.Warming can reduce plant diversity but it is unclear which species will be lost or gained under interacting global changes. Kaarlejärvi et al. manipulate temperature, herbivory and nutrients in a tundra system and find that herbivory maintains diversity under warming by reducing species losses and promoting gains.

  7. Microcanonical simulation of nuclear disassembly

    International Nuclear Information System (INIS)

    Koonin, S.E.; Randrup, J.

    1986-01-01

    There is considerable interest in the disassembly of the hot nuclear matter produced in high-energy nuclear collisions. A particular stimulus has been the prospect of observing a nuclear liquid-gas phase transition. On rather general grounds, such a transition is expected to occur in nuclear matter at subsaturation densities with temperatures of 10-20 MeV. However, virtually all previous discussions of this phenomenon have been based on thermodynamical considerations valid for infinite, non-interacting systems and the qualitative validity of the results has not been ascertained for the relatively small, finite, interacting systems of practical relevance. Nor is it clear how the occurrence of the phase transition will manifest itself in the asymptotically observed fragment distribution. To progress in these matters, the authors have formulated a microcanonical simulation of the disassembly process, including interfragment interactions. It is a natural refinement of the grand canonical model first presented in [1] and further developed in [2] and is also a exact version of the model developed in [3] for the generation of complete multifragment events in medium-energy collisions. In this contribution, the authors give a brief description of the key ingredients in the model and its numerical implementation

  8. Modeling operational behavior of a disassembly line

    Science.gov (United States)

    Kizilkaya, Elif A.; Gupta, Surendra M.

    2004-12-01

    In this paper we present a dynamic kanban (pull) system specifically developed for disassembly lines. This type of kanban system is much more complex than the traditional kanban system used in assembly lines. For instance, unlike the assembly line where the external demand occurs only at the last station, the demands in the disassembly case also occur at any of the intermittent stations. The reason is that as a product moves on the disassembly line, various parts are disassembled at every station and accumulated at that station. Therefore, there are as many demand sources as there are number of parts. We consider a case example involving the end-of-life products. Based on the precedence relationships and other criteria such as hazardous properties of the parts, we balance the disassembly line. The results of the disassembly line-balancing problem (DLBP) are used as input to the proposed dynamic kanban system for disassembly line (DKSDL). We compare the performance of the DKSDL to the modified kanban system for disassembly line (MKSDL), which was previously introduced by the authors. We show, via simulation, that the DKSDL is far superior to MKSDL considered.

  9. Illustrating the disassembly of 3D models

    KAUST Repository

    Guo, Jianwei; Yan, Dongming; Li, Er; Dong, Weiming; Wonka, Peter; Zhang, Xiaopeng

    2013-01-01

    We present a framework for the automatic disassembly of 3D man-made models and the illustration of the disassembly process. Given an assembled 3D model, we first analyze the individual parts using sharp edge loops and extract the contact faces

  10. Multi-kanban mechanism for personal computer disassembly

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.; Kamarthi, Sagar V.

    2004-12-01

    The use of personal computers (PCs) continues to increase every year. According to a 1999 figure, 50 percent of all US households owned PCs, a figure that continues to rise every year. With continuous development of sophisticated software, PCs are becoming increasingly powerful. In addition, the price of a PC continues to steadily decline. Furthermore, the typical life of a PC in the workplace is approximately two to three years while in the home it is three to five years. As these PCs become obsolete, they are replaced and the old PCs are disposed of. It is estimated that between 14 and 20 million PCs are retired annually in the US. While 20 to 30% of the units may be resold, the others are discarded. These discards represent a significant potential source of lead for the waste stream. In some communities, waste cathode ray tubes (CRTs) represent the second largest source of lead in the waste stream after vehicular lead acid batteries. PCs are, therefore, not suitable for dumping in landfills. Besides, several components of a PC can be reused and then there are other valuable materials that can also be harvested. And with the advent of product stewardship, product recovery is the best solution for manufacturers. Disassembly line is perhaps the most suitable set up for disassembling PCs. However, planning and scheduling of disassembly on a disassembly line is complicated. In this paper, we discuss some of the complications including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We then show how to overcome them by implementing a multi-kanban mechanism in the PC disassembly line setting. The multi-kanban mechanism relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and demonstrate that this mechanism is superior to the traditional push system in terms of controlling the system"s inventory while maintaining a decent customer service level.

  11. Disassembly automation automated systems with cognitive abilities

    CERN Document Server

    Vongbunyong, Supachai

    2015-01-01

    This book presents a number of aspects to be considered in the development of disassembly automation, including the mechanical system, vision system and intelligent planner. The implementation of cognitive robotics increases the flexibility and degree of autonomy of the disassembly system. Disassembly, as a step in the treatment of end-of-life products, can allow the recovery of embodied value left within disposed products, as well as the appropriate separation of potentially-hazardous components. In the end-of-life treatment industry, disassembly has largely been limited to manual labor, which is expensive in developed countries. Automation is one possible solution for economic feasibility. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

  12. Generation of control sequences for a pilot-disassembly system

    Science.gov (United States)

    Seliger, Guenther; Kim, Hyung-Ju; Keil, Thomas

    2002-02-01

    Closing the product and material cycles has emerged as a paradigm for industry in the 21st century. Disassembly plays a key role in a life cycle economy since it enables the recovery of resources. A partly automated disassembly system should adapt to a large variety of products and different degrees of devaluation. Also the amounts of products to be disassembled can vary strongly. To cope with these demands an approach to generate on-line disassembly control sequences will be presented. In order to react on these demands the technological feasibility is considered within a procedure for the generation of disassembly control sequences. Procedures are designed to find available and technologically feasible disassembly processes. The control system is formed by modularised and parameterised control units in the cell level within the entire control architecture. In the first development stage product and process analyses at the sample product washing machine were executed. Furthermore a generalized disassembly process was defined. Afterwards these processes were structured in primary and secondary functions. In the second stage the disassembly control at the technological level was investigated. Factors were the availability of the disassembly tools and the technological feasibility of the disassembly processes within the disassembly system. Technical alternative disassembly processes are determined as a result of availability of the tools and technological feasibility of processes. The fourth phase was the concept for the generation of the disassembly control sequences. The approach will be proved in a prototypical disassembly system.

  13. Recycling of electrical motors by automatic disassembly

    Science.gov (United States)

    Karlsson, Björn; Järrhed, Jan-Ove

    2000-04-01

    This paper presents a robotized workstation for end-of-life treatment of electrical motors with an electrical effect of about 1 kW. These motors can, for example, be found in washing machines and in industry. There are two main steps in the work. The first step is an inspection whereby the functionality of the motor is checked and classification either for re-use or for disassembly is done. In the second step the motors classified for disassembly are disassembled in a robotized automatic station. In the initial step measurements are performed during a start-up sequence of about 1 s. By measuring the rotation speed and the current and voltage of the three phases of the motor classification for either reuse or disassembly can be done. During the disassembly work, vision data are fused in order to classify the motors according to their type. The vision system also feeds the control system of the robot with various object co-ordinates, to facilitate correct operation of the robot. Finally, tests with a vision system and eddy-current equipment are performed to decide whether all copper has been removed from the stator.

  14. Illustrating the disassembly of 3D models

    KAUST Repository

    Guo, Jianwei

    2013-06-11

    We present a framework for the automatic disassembly of 3D man-made models and the illustration of the disassembly process. Given an assembled 3D model, we first analyze the individual parts using sharp edge loops and extract the contact faces between each pair of neighboring parts. The contact faces are then used to compute the possible moving directions of each part. We then present a simple algorithm for clustering the sets of the individual parts into meaningful sub-assemblies, which can be used for a hierarchical decomposition. We take the stability of sub-assemblies into account during the decomposition process by considering the upright orientation of the input models. Our framework also provides a user-friendly interface to enable the superimposition of the constraints for the decomposition. Finally, we visualize the disassembly process by generating an animated sequence. The experiments demonstrate that our framework works well for a variety of complex models. © 2013 Elsevier Ltd.

  15. Nuclear fuel bundle disassembly and assembly tool

    International Nuclear Information System (INIS)

    Yates, J.; Long, J.W.

    1975-01-01

    A nuclear power reactor fuel bundle is described which has a plurality of tubular fuel rods disposed in parallel array between two transverse tie plates. It is secured against disassembly by one or more locking forks which engage slots in tie rods which position the transverse plates. Springs mounted on the fuel and tie rods are compressed when the bundle is assembled thereby maintaining a continual pressure against the locking forks. Force applied in opposition to the springs permits withdrawal of the locking forks so that one tie plate may be removed, giving access to the fuel rods. An assembly and disassembly tool facilitates removal of the locking forks when the bundle is to be disassembled and the placing of the forks during assembly of the bundle. (U.S.)

  16. Methods for otpimum and near optimum disassembly sequencing

    NARCIS (Netherlands)

    Lambert, A.J.D.; Gupta, S.M.

    2008-01-01

    This paper considers disassembly sequencing problems subjected to sequence dependent disassembly costs. In practice, the methods for dealing with such problems rely mainly on metaheuristic and heuristic methods, which intrinsically generate suboptimum solutions. Exact methods are NP-hard and

  17. Task-failure-driven rebalancing of disassembly lines

    OpenAIRE

    Altekin, Fatma Tevhide; Akkan, Can

    2011-01-01

    Many reverse-logistics systems that collect and reprocess end-of-life products require a disassembly stage. The nature of variability in incoming products, and damages, which are more likely to occur during disassembly than assembly, create a significant uncertainty in disassembly tasks, namely, possibility of failed tasks. Such failures may lead to some successor tasks being infeasible, which changes work contents of downstream stations. To improve the profitability of such a disassembly lin...

  18. Multi-kanban mechanism for appliance disassembly

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.

    2005-11-01

    The use of household appliances continues to rise every year. A significant number of End-Of-Life (EOL) appliances are generated because of the introduction of newer models that are more attractive, efficient and affordable. Others are, of course, generated when they become non-functional. Many regulations encourage recycling of EOL appliances to reduce the amount of waste sent to landfills. In addition, EOL appliances offer the appliance manufacturing and remanufacturing industries a source of less expensive raw materials and components. For this reason product recovery has become a subject of interest during the past decade. In this paper, we study the disassembly line for appliance disassembly. We discuss and incorporate some of the complications that are inherent in disassembly line including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We show how to overcome such complications by implementing a multi-kanban system in the appliance disassembly line setting. The multi-kanban system (MKS) relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and explore the effect of product mix on performance of the traditional push system (TPS) and MKS in terms of controlling the system's inventory while attempting to achieve a decent customer service level.

  19. A Robust Semi-Parametric Test for Detecting Trait-Dependent Diversification.

    Science.gov (United States)

    Rabosky, Daniel L; Huang, Huateng

    2016-03-01

    Rates of species diversification vary widely across the tree of life and there is considerable interest in identifying organismal traits that correlate with rates of speciation and extinction. However, it has been challenging to develop methodological frameworks for testing hypotheses about trait-dependent diversification that are robust to phylogenetic pseudoreplication and to directionally biased rates of character change. We describe a semi-parametric test for trait-dependent diversification that explicitly requires replicated associations between character states and diversification rates to detect effects. To use the method, diversification rates are reconstructed across a phylogenetic tree with no consideration of character states. A test statistic is then computed to measure the association between species-level traits and the corresponding diversification rate estimates at the tips of the tree. The empirical value of the test statistic is compared to a null distribution that is generated by structured permutations of evolutionary rates across the phylogeny. The test is applicable to binary discrete characters as well as continuous-valued traits and can accommodate extremely sparse sampling of character states at the tips of the tree. We apply the test to several empirical data sets and demonstrate that the method has acceptable Type I error rates. © The Author(s) 2015. Published by Oxford University Press, on behalf of the Society of Systematic Biologists. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. Disassembly and removal of sodium instrumentation test loop

    International Nuclear Information System (INIS)

    Ishikawa, Okinobu; Onojima, Takamitu; Nagai, Keiichi

    2000-07-01

    In 1999, the Sodium Instrumentation Test Loop was disassembled and removed. This report describes the tasks and experiences obtained in removing sodium from a storage tank, disassembling, and cleansing components and related activities. Overall the disassembly, handling and cleansing tasks proceeded as planned and the activities were carried out efficiently and safely. Documentation of the process is meant to establish not only a procedure, but also a guideline for future similar tasks. (author)

  1. Multikanban model for disassembly line with demand fluctuation

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.; Al-Turki, Yousef A. Y.

    2004-02-01

    In recent years, the continuous growth in consumer waste and dwindling natural resources has seriously threatened the environment. Realizing this, several countries have passed regulations that force manufacturers not only to manufacture environmentally conscious products, but also to take back their used products from consumers so that the components and materials recovered from the products may be reused and/or recycled. Disassembly plays an important role in product recovery. A disassembly line is perhaps the most suitable setting for disassembly of products in large quantities. Because a disassembly line has a tendency to generate excessive inventory, employing a kanban system can reduce the inventory level and let the system run more efficiently. A disassembly line is quite different from an assembly line. For example, not only can the demand arrive at the last station, it can also arrive at any of the other stations in the system. The demand for a component on the disassembly line could fluctuate widely. In fact, there are many other complicating matters that need to be considered to implement the concept of kanbans in such an environment. In this paper, we discuss the complications that are unique to a disassembly line. We discuss the complications in utilizing the conventional production control mechanisms in a disassembly line setting. We then show how to overcome them by implementing kanbans in a disassembly line setting with demand fluctuation and introduce the concept of multi-kanban mechanism. We demonstrate its effectiveness using a simulation model. An example is presented to illustrate the concept.

  2. Impact of different disassembly line balancing algorithms on the performance of dynamic kanban system for disassembly line

    Science.gov (United States)

    Kizilkaya, Elif A.; Gupta, Surendra M.

    2005-11-01

    In this paper, we compare the impact of different disassembly line balancing (DLB) algorithms on the performance of our recently introduced Dynamic Kanban System for Disassembly Line (DKSDL) to accommodate the vagaries of uncertainties associated with disassembly and remanufacturing processing. We consider a case study to illustrate the impact of various DLB algorithms on the DKSDL. The approach to the solution, scenario settings, results and the discussions of the results are included.

  3. The assembly and disassembly of ecological networks.

    Science.gov (United States)

    Bascompte, Jordi; Stouffer, Daniel B

    2009-06-27

    Global change has created a severe biodiversity crisis. Species are driven extinct at an increasing rate, and this has the potential to cause further coextinction cascades. The rate and shape of these coextinction cascades depend very much on the structure of the networks of interactions across species. Understanding network structure and how it relates to network disassembly, therefore, is a priority for system-level conservation biology. This process of network collapse may indeed be related to the process of network build-up, although very little is known about both processes and even less about their relationship. Here we review recent work that provides some preliminary answers to these questions. First, we focus on network assembly by emphasizing temporal processes at the species level, as well as the structural building blocks of complex ecological networks. Second, we focus on network disassembly as a consequence of species extinctions or habitat loss. We conclude by emphasizing some general rules of thumb that can help in building a comprehensive framework to understand the responses of ecological networks to global change.

  4. Disassembly and Sanitization of Classified Matter

    International Nuclear Information System (INIS)

    Stockham, Dwight J.; Saad, Max P.

    2008-01-01

    The Disassembly Sanitization Operation (DSO) process was implemented to support weapon disassembly and disposition by using recycling and waste minimization measures. This process was initiated by treaty agreements and reconfigurations within both the DOD and DOE Complexes. The DOE is faced with disassembling and disposing of a huge inventory of retired weapons, components, training equipment, spare parts, weapon maintenance equipment, and associated material. In addition, regulations have caused a dramatic increase in the need for information required to support the handling and disposition of these parts and materials. In the past, huge inventories of classified weapon components were required to have long-term storage at Sandia and at many other locations throughout the DoE Complex. These materials are placed in onsite storage unit due to classification issues and they may also contain radiological and/or hazardous components. Since no disposal options exist for this material, the only choice was long-term storage. Long-term storage is costly and somewhat problematic, requiring a secured storage area, monitoring, auditing, and presenting the potential for loss or theft of the material. Overall recycling rates for materials sent through the DSO process have enabled 70 to 80% of these components to be recycled. These components are made of high quality materials and once this material has been sanitized, the demand for the component metals for recycling efforts is very high. The DSO process for NGPF, classified components established the credibility of this technique for addressing the long-term storage requirements of the classified weapons component inventory. The success of this application has generated interest from other Sandia organizations and other locations throughout the complex. Other organizations are requesting the help of the DSO team and the DSO is responding to these requests by expanding its scope to include Work-for- Other projects. For example

  5. Detecting Hidden Diversification Shifts in Models of Trait-Dependent Speciation and Extinction.

    Science.gov (United States)

    Beaulieu, Jeremy M; O'Meara, Brian C

    2016-07-01

    The distribution of diversity can vary considerably from clade to clade. Attempts to understand these patterns often employ state-dependent speciation and extinction models to determine whether the evolution of a particular novel trait has increased speciation rates and/or decreased extinction rates. It is still unclear, however, whether these models are uncovering important drivers of diversification, or whether they are simply pointing to more complex patterns involving many unmeasured and co-distributed factors. Here we describe an extension to the popular state-dependent speciation and extinction models that specifically accounts for the presence of unmeasured factors that could impact diversification rates estimated for the states of any observed trait, addressing at least one major criticism of BiSSE (Binary State Speciation and Extinction) methods. Specifically, our model, which we refer to as HiSSE (Hidden State Speciation and Extinction), assumes that related to each observed state in the model are "hidden" states that exhibit potentially distinct diversification dynamics and transition rates than the observed states in isolation. We also demonstrate how our model can be used as character-independent diversification models that allow for a complex diversification process that is independent of the evolution of a character. Under rigorous simulation tests and when applied to empirical data, we find that HiSSE performs reasonably well, and can at least detect net diversification rate differences between observed and hidden states and detect when diversification rate differences do not correlate with the observed states. We discuss the remaining issues with state-dependent speciation and extinction models in general, and the important ways in which HiSSE provides a more nuanced understanding of trait-dependent diversification. © The Author(s) 2016. Published by Oxford University Press, on behalf of the Society of Systematic Biologists. All rights reserved

  6. Disassembling and modification of RA-3

    International Nuclear Information System (INIS)

    Tarizzo, R.D.

    1990-01-01

    The objective of this paper is to describe the partial disassembling and modification of RA-3, called the Modernization Project. It comprises all the technical and administrative steps directly related with this task. The improvement of RA-3 is a result of the lack of 90% enriched uranium obliging a change over to 20% enriched uranium. This brought about design modifications both in fuel elements and the reactor. The presentation of documents for the licensing authority as well as are detailed separately. The modernization project was divided in 25 tasks: 1) changing fuel element support table, 2) changing heat exchanger, 3) repairing of cooling towers, 4) repairing of primary circuit valves, 5) repairing of irradiation channels, 6) construction of a new sampler, 7) changing tangential channel, 8) cleaning and disassembling of reactor (inside), 9) changing continuous demineralizer (ion exchange column), 10) detection of failure in fuel elements, 11) modification of nuclear instrumentation, 12) modification of conventional instrumentation, 13) modification of electrical system, 14) changing telemanipulators, 15) construction of mechanism bridge, 16) changing a primary circuit valve when the heat exchanger is changed too, 17) painting ground floor, hall floor, and pump room floor with epoxy resin levelling, 18) installation of fire alarm system, 19) radioactive liquid discharge, 20) modification of secondary circuit (This task involves: a) installation of a third secondary pump, b) extension of this piping, c) installation of two 12 inch valves to the present cooling towers pools independent, d) installation of filtering system), 21) optimization hot water bed, 22) changing detector support table, 23) removal, decontamination and reinstallation of shielding, 25) changing pneumatic system

  7. Montmorillonite-induced Bacteriophage φ6 Disassembly

    Science.gov (United States)

    Trusiak, A.; Gottlieb, P.; Katz, A.; Alimova, A.; Steiner, J. C.; Block, K. A.

    2012-12-01

    It is estimated that there are 1031 virus particles on Earth making viruses an order of magnitude more prevalent in number than prokaryotes with the vast majority of viruses being bacteriophages. Clays are a major component of soils and aquatic sediments and can react with RNA, proteins and bacterial biofilms. The clays in soils serve as an important moderator between phage and their host bacteria, helping to preserve the evolutionary balance. Studies on the effects of clays on viral infectivity have given somewhat contradictory results; possibly a consequence of clay-virus interactions being dependent on the unique structure of particular viruses. In this work, the interaction between montmorillonite and the bacteriophage φ6 is investigated. φ6 is a member of the cystovirus family that infects Pseudomonas syringe, a common plant pathogen. As a member of the cystovirus family with an enveloped structure, φ6 serves as a model for reoviruses, a human pathogen. Experiments were conducted with φ6 suspended in dilute, purified homoionic commercial-grade montmorillonite over a range of virus:clay ratios. At a 1:100000 virus:clay ratio, the clay reduced viral infectivity by 99%. The minimum clay to virus ratio which results in a measurable reduction of P. syringae infection is 1:1. Electron microscopy demonstrates that mixed suspensions of smectite and virus co-aggregate to form flocs encompassing virions within the smectite. Both free viral particles as well as those imbedded in the flocs are seen in the micrographs to be missing the envelope- leaving only the nucleocapsid (NC) intact; indicating that smectite inactivates the virus by envelope disassembly. These results have strong implications in the evolution of both the φ6 virus and its P. syringae host cells. TEM of aggregate showing several disassembled NCs.

  8. A Taxonomy and Comparison of Haptic Actions for Disassembly Tasks

    National Research Council Canada - National Science Library

    Bloomfield, Aaron; Deng, Yu; Wampler, Jeff; Rondot, Pascale; Harth, Dina; McManus, Mary; Badler, Norman

    2003-01-01

    .... We conducted a series of human subject experiments to compare user performance and preference on a disassembly task with and without haptic feedback using CyberGlove, Phantom, and SpaceMouse interfaces...

  9. Systems impacts of spent fuel disassembly alternatives

    International Nuclear Information System (INIS)

    1984-07-01

    Three studies were completed to evaluate four alternatives to the disposal of intact spent fuel assemblies in a geologic repository. A preferred spent fuel waste form for disposal was recommended on consideration of (1) package design and fuel/package interaction, (2) long-term, in-repository performance of the waste form, and (3) overall process performance and costs for packaging, handling, and emplacement. The four basic alternative waste forms considered were (1) end fitting removal, (2) fission gas venting, (3) disassembly and close packing, and (4) shearing/immobilization. None of the findings ruled out any alternative on the basis of waste package considerations or long-term performance of the waste form. The third alternative offers flexibility in loading that may prove attractive in the various geologic media under consideration, greatly reduces the number of packages, and has the lowest unit cost. These studies were completed in October, 1981. Since then Westinghouse Electric Corporation and the Office of Nuclear Waste Isolation have completed studies in related fields. This report is now being published to provide publicly the background material that is contained within. 47 references, 28 figures, 31 tables

  10. Artificial biofilms establish the role of matrix interactions in staphylococcal biofilm assembly and disassembly

    Science.gov (United States)

    Stewart, Elizabeth J.; Ganesan, Mahesh; Younger, John G.; Solomon, Michael J.

    2015-01-01

    We demonstrate that the microstructural and mechanical properties of bacterial biofilms can be created through colloidal self-assembly of cells and polymers, and thereby link the complex material properties of biofilms to well understood colloidal and polymeric behaviors. This finding is applied to soften and disassemble staphylococcal biofilms through pH changes. Bacterial biofilms are viscoelastic, structured communities of cells encapsulated in an extracellular polymeric substance (EPS) comprised of polysaccharides, proteins, and DNA. Although the identity and abundance of EPS macromolecules are known, how these matrix materials interact with themselves and bacterial cells to generate biofilm morphology and mechanics is not understood. Here, we find that the colloidal self-assembly of Staphylococcus epidermidis RP62A cells and polysaccharides into viscoelastic biofilms is driven by thermodynamic phase instability of EPS. pH conditions that induce phase instability of chitosan produce artificial S. epidermidis biofilms whose mechanics match natural S. epidermidis biofilms. Furthermore, pH-induced solubilization of the matrix triggers disassembly in both artificial and natural S. epidermidis biofilms. This pH-induced disassembly occurs in biofilms formed by five additional staphylococcal strains, including three clinical isolates. Our findings suggest that colloidal self-assembly of cells and matrix polymers produces biofilm viscoelasticity and that biofilm control strategies can exploit this mechanism. PMID:26272750

  11. A symbolic methodology to improve disassembly process design.

    Science.gov (United States)

    Rios, Pedro; Blyler, Leslie; Tieman, Lisa; Stuart, Julie Ann; Grant, Ed

    2003-12-01

    Millions of end-of-life electronic components are retired annually due to the proliferation of new models and their rapid obsolescence. The recovery of resources such as plastics from these goods requires their disassembly. The time required for each disassembly and its associated cost is defined by the operator's familiarity with the product design and its complexity. Since model proliferation serves to complicate an operator's learning curve, it is worthwhile to investigate the benefits to be gained in a disassembly operator's preplanning process. Effective disassembly process design demands the application of green engineering principles, such as those developed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A), which include regard for product complexity, structural commonality, separation energy, material value, and waste prevention. This paper introduces the concept of design symbolsto help the operator more efficiently survey product complexity with respect to location and number of fasteners to remove a structure that is common to all electronics: the housing. With a sample of 71 different computers, printers, and monitors, we demonstrate that appropriate symbols reduce the total disassembly planning time by 13.2 min. Such an improvement could well make efficient the separation of plastic that would otherwise be destined for waste-to-energy or landfill. The symbolic methodology presented may also improve Design for Recycling and Design for Maintenance and Support.

  12. Disassembling and rebuilding 900 MW unit fuel assemblies in Celimene

    International Nuclear Information System (INIS)

    Giquel, G.; Leseur, A.; Pillet, C.; Van Craeynest, J.C.

    1987-01-01

    The Celimene high activity laboratory, in the Nuclear Research Centre of Saclay, has equipment for and experience of disassembling and rebuilding fuel assemblies from 900 MW light water reactors. These operations have been performed for R and D purposes; they allow removal for investigation of some of the fuel rods and examination of the skeleton. The rebuilt assemblies are sent to the fuel reprocessing plant. Reirradiation of these assemblies has not been considered so far and would require modifications of the procedure and of parts of the new skeleton. Disassembling and rebuilding have already been performed on three assemblies and a fourth one will be rebuilt in the coming months [fr

  13. Mathematical and Simulation Modelling of Moisture Diffusion Mechanism during Plastic IC Packages Disassembly

    OpenAIRE

    Peng Mou; Dong Xiang; Guanghong Duan

    2013-01-01

    Reuse of plastic IC packages disassembled from printed circuit boards (PCBs) has significant environmental benefits and economic value. The interface delamination caused by moisture diffusion is the main failure mode of IC packages during the disassembling process, which greatly reduces the reusability and reliability of disassembled IC packages. Exploring moisture diffusion mechanism is a prerequisite to optimize prebaking processes before disassembling that is an effective way to avoid the ...

  14. Desmosome Assembly and Disassembly Are Membrane Raft-Dependent

    Science.gov (United States)

    Faundez, Victor; Koval, Michael; Mattheyses, Alexa L.; Kowalczyk, Andrew P.

    2014-01-01

    Strong intercellular adhesion is critical for tissues that experience mechanical stress, such as the skin and heart. Desmosomes provide adhesive strength to tissues by anchoring desmosomal cadherins of neighboring cells to the intermediate filament cytoskeleton. Alterations in assembly and disassembly compromise desmosome function and may contribute to human diseases, such as the autoimmune skin blistering disease pemphigus vulgaris (PV). We previously demonstrated that PV auto-antibodies directed against the desmosomal cadherin desmoglein 3 (Dsg3) cause loss of adhesion by triggering membrane raft-mediated Dsg3 endocytosis. We hypothesized that raft membrane microdomains play a broader role in desmosome homeostasis by regulating the dynamics of desmosome assembly and disassembly. In human keratinocytes, Dsg3 is raft associated as determined by biochemical and super resolution immunofluorescence microscopy methods. Cholesterol depletion, which disrupts rafts, prevented desmosome assembly and adhesion, thus functionally linking rafts to desmosome formation. Interestingly, Dsg3 did not associate with rafts in cells lacking desmosomal proteins. Additionally, PV IgG-induced desmosome disassembly occurred by redistribution of Dsg3 into raft-containing endocytic membrane domains, resulting in cholesterol-dependent loss of adhesion. These findings demonstrate that membrane rafts are required for desmosome assembly and disassembly dynamics, suggesting therapeutic potential for raft targeting agents in desmosomal diseases such as PV. PMID:24498201

  15. Preliminary topical report on comparison reactor disassembly calculations

    International Nuclear Information System (INIS)

    McLaughlin, T.P.

    1975-11-01

    Preliminary results of comparison disassembly calculations for a representative LMFBR model (2100-l voided core) and arbitrary accident conditions are described. The analytical methods employed were the computer programs: FX2-POOL, PAD, and VENUS-II. The calculated fission energy depositions are in good agreement, as are measures of the destructive potential of the excursions, kinetic energy, and work. However, in some cases the resulting fuel temperatures are substantially divergent. Differences in the fission energy deposition appear to be attributable to residual inconsistencies in specifying the comparison cases. In contrast, temperature discrepancies probably stem from basic differences in the energy partition models inherent in the codes. Although explanations of the discrepancies are being pursued, the preliminary results indicate that all three computational methods provide a consistent, global characterization of the contrived disassembly accident

  16. Integrating Safeguards into the Pit Disassembly and Conversion Facility

    International Nuclear Information System (INIS)

    Clark, T.G.

    2002-01-01

    In September 2000, the United States and the Russian Federation entered into an agreement which stipulates each country will irreversibly transform 34 metric tons of weapons-grade plutonium into material which could not be used for weapon purposes. Supporting the Department of Energy's (DOE) program to dispose of excess nuclear materials, the Pit Disassembly and Conversion Facility (PDCF) is being designed and constructed to disassemble the weapon ''pits'' and convert the nuclear material to an oxide form for fabrication into reactor fuel at the separate Mixed Oxide Fuel Fabrication Facility. The PDCF design incorporates automation to the maximum extent possible to facilitate material safeguards, reduce worker dose, and improve processing efficiency. This includes provisions for automated guided vehicle movements for shipping containers, material transport via automated conveyor between processes, remote process control monitoring, and automated Nondestructive Assay product systems

  17. Capillarity-induced disassembly of virions in carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Fan Xiaobin; Peng Wenchao; Li Yang; Li Xianyu; Zhang Guoliang; Zhang Fengbao [School of Chemical Engineering and Technology, Tianjin University, Tianjin (China); Barclay, J Elaine; Evans, David J [Department of Biological Chemistry, John Innes Centre, Norwich Research Park, Norwich NR4 7UH (United Kingdom)], E-mail: fbzhang@tju.edu.cn

    2008-04-23

    Studying the transport and fate of viruses through nanochannels is of great importance. By using the nanochannel of a carbon nanotube (CNT) as an ideal model, we evaluated the possibility of capillarity-induced viral transport through a closely fitting nanochannel and explored the mechanisms involved. It is shown both experimentally and theoretically that Cowpea mosaic virus can enter CNTs by capillarity. However, when introduced into a nanotube the protein capsid may disassemble. During the initial capillary filling stage, anomalous needle-shaped high pressure exists in the centre of the nanotube's entrance. This high pressure, combining with the significant negative pressure within the nanotube, may account for the disassembly of the virions.

  18. Status of the pit disassembly and conversion facility

    International Nuclear Information System (INIS)

    Wood, Warren T.; Christensen, Lowell T.

    2000-01-01

    A planned new facility, the Pit Disassembly and Conversion Facility (PDCF), will be used to disassemble the nation's inventory of surplus nuclear weapons pits and convert the plutonium from those pits into a form suitable for storage, international inspection, and final disposition. Sized to handle 35 metric tons of plutonium from pits and other sources over its 10-year operating life, the PDCF will apply the Advanced Recovery and Integrated Extraction System (ARIES) technology. ARIES process technology has been developed at Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL), and an integrated system is being demonstrated at LANL. The Los Alamos National Laboratory is the lead for technical design oversight of the PDCF. Technical data gained from the ARIES demonstrations is integral for the proper design of the PDCF

  19. Meiotic Clade AAA ATPases: Protein Polymer Disassembly Machines.

    Science.gov (United States)

    Monroe, Nicole; Hill, Christopher P

    2016-05-08

    Meiotic clade AAA ATPases (ATPases associated with diverse cellular activities), which were initially grouped on the basis of phylogenetic classification of their AAA ATPase cassette, include four relatively well characterized family members, Vps4, spastin, katanin and fidgetin. These enzymes all function to disassemble specific polymeric protein structures, with Vps4 disassembling the ESCRT-III polymers that are central to the many membrane-remodeling activities of the ESCRT (endosomal sorting complexes required for transport) pathway and spastin, katanin p60 and fidgetin affecting multiple aspects of cellular dynamics by severing microtubules. They share a common domain architecture that features an N-terminal MIT (microtubule interacting and trafficking) domain followed by a single AAA ATPase cassette. Meiotic clade AAA ATPases function as hexamers that can cycle between the active assembly and inactive monomers/dimers in a regulated process, and they appear to disassemble their polymeric substrates by translocating subunits through the central pore of their hexameric ring. Recent studies with Vps4 have shown that nucleotide-induced asymmetry is a requirement for substrate binding to the pore loops and that recruitment to the protein lattice via MIT domains also relieves autoinhibition and primes the AAA ATPase cassettes for substrate binding. The most striking, unifying feature of meiotic clade AAA ATPases may be their MIT domain, which is a module that is found in a wide variety of proteins that localize to ESCRT-III polymers. Spastin also displays an adjacent microtubule binding sequence, and the presence of both ESCRT-III and microtubule binding elements may underlie the recent findings that the ESCRT-III disassembly function of Vps4 and the microtubule-severing function of spastin, as well as potentially katanin and fidgetin, are highly coordinated. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. On the optimal design of the disassembly and recovery processes.

    Science.gov (United States)

    Xanthopoulos, A; Iakovou, E

    2009-05-01

    This paper tackles the problem of the optimal design of the recovery processes of the end-of-life (EOL) electric and electronic products, with a special focus on the disassembly issues. The objective is to recover as much ecological and economic value as possible, and to reduce the overall produced quantities of waste. In this context, a medium-range tactical problem is defined and a novel two-phased algorithm is presented for a remanufacturing-driven reverse supply chain. In the first phase, we propose a multicriteria/goal-programming analysis for the identification and the optimal selection of the most 'desirable' subassemblies and components to be disassembled for recovery, from a set of different types of EOL products. In the second phase, a multi-product, multi-period mixed-integer linear programming (MILP) model is presented, which addresses the optimization of the recovery processes, while taking into account explicitly the lead times of the disassembly and recovery processes. Moreover, a simulation-based solution approach is proposed for capturing the uncertainties in reverse logistics. The overall approach leads to an easy-to-use methodology that could support effectively middle level management decisions. Finally, the applicability of the developed methodology is illustrated by its application on a specific case study.

  1. On the optimal design of the disassembly and recovery processes

    International Nuclear Information System (INIS)

    Xanthopoulos, A.; Iakovou, E.

    2009-01-01

    This paper tackles the problem of the optimal design of the recovery processes of the end-of-life (EOL) electric and electronic products, with a special focus on the disassembly issues. The objective is to recover as much ecological and economic value as possible, and to reduce the overall produced quantities of waste. In this context, a medium-range tactical problem is defined and a novel two-phased algorithm is presented for a remanufacturing-driven reverse supply chain. In the first phase, we propose a multicriteria/goal-programming analysis for the identification and the optimal selection of the most 'desirable' subassemblies and components to be disassembled for recovery, from a set of different types of EOL products. In the second phase, a multi-product, multi-period mixed-integer linear programming (MILP) model is presented, which addresses the optimization of the recovery processes, while taking into account explicitly the lead times of the disassembly and recovery processes. Moreover, a simulation-based solution approach is proposed for capturing the uncertainties in reverse logistics. The overall approach leads to an easy-to-use methodology that could support effectively middle level management decisions. Finally, the applicability of the developed methodology is illustrated by its application on a specific case study

  2. SAVANNAH RIVER SITE R REACTOR DISASSEMBLY BASIN IN SITU DECOMMISSIONING

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C.; Blankenship, J.; Griffin, W.; Serrato, M.

    2009-12-03

    The US DOE concept for facility in-situ decommissioning (ISD) is to physically stabilize and isolate in tact, structurally sound facilities that are no longer needed for their original purpose of, i.e., generating (reactor facilities), processing(isotope separation facilities) or storing radioactive materials. The 105-R Disassembly Basin is the first SRS reactor facility to undergo the in-situ decommissioning (ISD) process. This ISD process complies with the105-R Disassembly Basin project strategy as outlined in the Engineering Evaluation/Cost Analysis for the Grouting of the R-Reactor Disassembly Basin at the Savannah River Site and includes: (1) Managing residual water by solidification in-place or evaporation at another facility; (2) Filling the below grade portion of the basin with cementitious materials to physically stabilize the basin and prevent collapse of the final cap - Sludge and debris in the bottom few feet of the basin will be encapsulated between the basin floor and overlying fill material to isolate if from the environment; (3) Demolishing the above grade portion of the structure and relocating the resulting debris to another location or disposing of the debris in-place; and (4) Capping the basin area with a concrete slab which is part of an engineered cap to prevent inadvertent intrusion. The estimated total grout volume to fill the 105-R Reactor Disassembly Basin is 24,424 cubic meters or 31,945 cubic yards. Portland cement-based structural fill materials were design and tested for the reactor ISD project and a placement strategy for stabilizing the basin was developed. Based on structural engineering analyses and work flow considerations, the recommended maximum lift height is 5 feet with 24 hours between lifts. Pertinent data and information related to the SRS 105-R-Reactor Disassembly Basin in-situ decommissioning include: regulatory documentation, residual water management, area preparation activities, technology needs, fill material designs

  3. Are quantitative trait-dependent sampling designs cost-effective for analysis of rare and common variants?

    Science.gov (United States)

    Yilmaz, Yildiz E; Bull, Shelley B

    2011-11-29

    Use of trait-dependent sampling designs in whole-genome association studies of sequence data can reduce total sequencing costs with modest losses of statistical efficiency. In a quantitative trait (QT) analysis of data from the Genetic Analysis Workshop 17 mini-exome for unrelated individuals in the Asian subpopulation, we investigate alternative designs that sequence only 50% of the entire cohort. In addition to a simple random sampling design, we consider extreme-phenotype designs that are of increasing interest in genetic association analysis of QTs, especially in studies concerned with the detection of rare genetic variants. We also evaluate a novel sampling design in which all individuals have a nonzero probability of being selected into the sample but in which individuals with extreme phenotypes have a proportionately larger probability. We take differential sampling of individuals with informative trait values into account by inverse probability weighting using standard survey methods which thus generalizes to the source population. In replicate 1 data, we applied the designs in association analysis of Q1 with both rare and common variants in the FLT1 gene, based on knowledge of the generating model. Using all 200 replicate data sets, we similarly analyzed Q1 and Q4 (which is known to be free of association with FLT1) to evaluate relative efficiency, type I error, and power. Simulation study results suggest that the QT-dependent selection designs generally yield greater than 50% relative efficiency compared to using the entire cohort, implying cost-effectiveness of 50% sample selection and worthwhile reduction of sequencing costs.

  4. Disassembly of JT-60 tokamak device and ancillary facilities for JT-60 tokamak

    International Nuclear Information System (INIS)

    Okano, Fuminori; Ichige, Hisashi; Miyo, Yasuhiko; Kaminaga, Atsushi; Sasajima, Tadayuki; Nishiyama, Tomokazu; Yagyu, Jun-ichi; Ishige, Youichi; Suzuki, Hiroaki; Komuro, Kenichi; Sakasai, Akira; Ikeda, Yoshitaka

    2014-03-01

    The disassembly of JT-60 tokamak device and its peripheral equipments, where the total weight was about 5400 tons, started in 2009 and accomplished in October 2012. This disassembly was required process for JT-60SA project, which is the Satellite Tokamak project under Japan-EU international corroboration to modify the JT-60 to the superconducting tokamak. This work was the first experience of disassembling a large radioactive fusion device based on Radiation Hazard Prevention Act in Japan. The cutting was one of the main problems in this disassembly, such as to cut the welded parts together with toroidal field coils, and to cut the vacuum vessel into two. After solving these problems, the disassembly completed without disaster and accident. This report presents the outline of the JT-60 disassembly, especially tokamak device and ancillary facilities for tokamak device. (author)

  5. Spent fuel disassembly and canning programs at the Barnwell Nuclear Fuel Plant (BNFP)

    International Nuclear Information System (INIS)

    Townes, G.A.

    1979-10-01

    Methods of disassembling and canning spent fuel to allow more efficient storage are being investigated at the BNFP. Studies and development programs are aimed at dry disassembly of fuel to allow storage and shipment of fuel pins rather than full fuel assemblies. Results indicate that doubling existing storage capacity or tripling the carrying capacity of existing transportation equipment is achievable. Disassembly could be performed in the BNFP hot cells at rates of about 12 to 15 assemblies per day

  6. Application of industrial robots in automatic disassembly line of waste LCD displays

    Science.gov (United States)

    Wang, Sujuan

    2017-11-01

    In the automatic disassembly line of waste LCD displays, LCD displays are disassembled into plastic shells, metal shields, circuit boards, and LCD panels. Two industrial robots are used to cut metal shields and remove circuit boards in this automatic disassembly line. The functions of these two industrial robots, and the solutions to the critical issues of model selection, the interfaces with PLCs and the workflows were described in detail in this paper.

  7. Corrosion of aluminum alloys in a reactor disassembly basin

    International Nuclear Information System (INIS)

    Howell, J.P.; Zapp, P.E.; Nelson, D.Z.

    1992-01-01

    This document discusses storage of aluminum clad fuel and target tubes of the Mark 22 assembly takes place in the concrete-lined, light-water-filled, disassembly basins located within each reactor area at the Savannah River Site (SRS). A corrosion test program has been conducted in the K-Reactor disassembly basin to assess the storage performance of the assemblies and other aluminum clad components in the current basin environment. Aluminum clad alloys cut from the ends of actual fuel and target tubes were originally placed in the disassembly water basin in December 1991. After time intervals varying from 45--182 days, the components were removed from the basin, photographed, and evaluated metallographically for corrosion performance. Results indicated that pitting of the 8001 aluminum fuel clad alloy exceeded the 30-mil (0.076 cm) cladding thickness within the 45-day exposure period. Pitting of the 1100 aluminum target clad alloy exceeded the 30-mil (0.076 cm) clad thickness in 107--182 days exposure. The existing basin water chemistry is within limits established during early site operations. Impurities such as Cl - , NO 3 - and SO 4 - are controlled to the parts per million level and basin water conductivity is currently 170--190 μmho/cm. The test program has demonstrated that the basin water is aggressive to the aluminum components at these levels. Other storage basins at SRS and around the US have successfully stored aluminum components for greater than ten years without pitting corrosion. These basins have impurity levels controlled to the parts per billion level (1000X lower) and conductivity less than 1.0 μmho/cm

  8. Phosphorylation and disassembly of intermediate filaments in mitotic cells

    International Nuclear Information System (INIS)

    Chou, Yinghao; Rosevear, E.; Goldman, R.D.

    1989-01-01

    As baby hamster kidney (BHK-21) cells enter mitosis, networks of intermediate filaments (IFs) are transformed into cytoplasmic aggregates of protofilaments. Coincident with this morphological change, the phosphate content of vimentin increases from 0.3 mol of P i per mol of protein in interphase to 1.9 mol of P i per mol of protein in mitosis. A similar increase in phosphate content is observed with desmin, from 0.5 mol of P i per mol of protein to 1.5 mol of P i per mol of protein. Fractionation of mitotic cell lysates by hydroxylapatite column chromatography reveals the presence of two IF protein kinase activities, designated as IF protein kinase I and IF protein kinase II. Comparison of two-dimensional 32 P-labeled phosphopeptide maps of vimentin and desmin phosphorylated in vivo in mitosis, and in vitro using partially purified kinase fractions, reveals extensive similarity in the two sets of phosphorylation sites. Phosphorylation of in vitro polymerized IFs by IF protein kinase II induces complete disassembly as determined by negative-stain electron microscopy. The results support the idea that the disassembly of IFs in mitosis is regulated by the phosphorylation of its subunit proteins

  9. Digital mock-up for the spent fuel disassembly processes

    International Nuclear Information System (INIS)

    Lee, J. Y.; Kim, S. H.; Song, T. G.; Kim, Y. H.; Hong, D. H.; Yoon, J. S.

    2000-12-01

    In this study, the graphical design system is developed and the digital mock-up is implemented for designing the spent fuel handling and disassembly processes. The system consists of a 3D graphical modeling system, a devices assembling system, and a motion simulation system. This system is used throughout the design stages from the conceptual design to the motion analysis. By using this system, all the process involved in the spent fuel handling and disassembly processes are analyzed and optimized. Also, this system is used in developing the on-line graphic simulator which synchronously simulates the motion of the equipment in a real time basis by connecting the device controllers with the graphic server through the TCP/IP network. This simulator can be effectively used for detecting the malfunctions of the process equipment which is remotely operated. Thus, the simulator enhances the reliability and safety of the spent fuel handling process by providing the remote monitoring function of the process. The graphical design system and the digital mock-up system can be effectively used for designing the process equipment, as well as the optimized process and maintenance process. And the on-line graphic simulator can be an alternative of the conventional process monitoring system which is a hardware based system

  10. Assembly and disassembly of the nucleolus during the cell cycle.

    Science.gov (United States)

    Hernandez-Verdun, Danièle

    2011-01-01

    The nucleolus is a large nuclear domain in which transcription, maturation and assembly of ribosomes take place. In higher eukaryotes, nucleolar organization in three sub-domains reflects the compartmentation of the machineries related to active or inactive transcription of the ribosomal DNA, ribosomal RNA processing and assembly with ribosomal proteins of the two (40S and 60S) ribosomal subunits. The assembly of the nucleoli during telophase/early G(1) depends on pre-existing machineries inactivated during prophase (the transcription machinery and RNP processing complexes) and on partially processed 45S rRNAs inherited throughout mitosis. In telophase, the 45S rRNAs nucleate the prenucleolar bodies and order the dynamics of nucleolar assembly. The assembly/disassembly processes of the nucleolus depend on the equilibrium between phosphorylation/dephosphorylation of the transcription machinery and on the RNP processing complexes under the control of the CDK1-cyclin B kinase and PP1 phosphatases. The dynamics of assembly/disassembly of the nucleolus is time and space regulated.

  11. ARIES pit disassembly-safeguards issues for transparency

    International Nuclear Information System (INIS)

    Fearey, B.L.; Cremers, T.L.

    1995-01-01

    Historic changes are now occurring in U.S. nonproliferation and arms control policy. The quantity of nuclear weapons required to provide a deterrence has decreased (especially with the end of the Cold War). Further, various bilateral and multilateral treaties now require the removal of numerous nuclear weapons from the U.S. stockpile. Although the removal of such weapons appears straightforward, the final disposition of the surplus weapons-grade nuclear material must be carefully considered. Domestically, several plutonium disposition plans are now under consideration concerning long-term safety, materials accounting, environmental impact, accessibility, and long-term containment. The Automated Retirement and Integrated Extraction System (ARIES) currently under development at Los Alamos National Laboratory is one such disposition method for the disassembly of plutonium weapons components (pits). The ARIES system integrates and automates several features: disassembly of pits, consolidation of the plutonium material, on-line measurement of final products, waste streams, and long-term packaging. Clearly, in any plutonium disposition plan, the safeguards aspects of materials control and accounting and the security aspects must be carefully considered and evaluated

  12. Movement and equipositioning of plasmids by ParA filament disassembly

    DEFF Research Database (Denmark)

    Ringgaard, Simon; van Zon, Jeroen; Howard, Martin

    2009-01-01

    , plasmids consistently migrate behind disassembling ParA cytoskeletal structures, suggesting that ParA filaments pull plasmids by depolymerization. The perpetual cycles of ParA assembly and disassembly result in continuous relocation of plasmids, which, on time averaging, results in equidistribution...

  13. Coordination of substrate binding and ATP hydrolysis in Vps4-mediated ESCRT-III disassembly.

    Science.gov (United States)

    Davies, Brian A; Azmi, Ishara F; Payne, Johanna; Shestakova, Anna; Horazdovsky, Bruce F; Babst, Markus; Katzmann, David J

    2010-10-01

    ESCRT-III undergoes dynamic assembly and disassembly to facilitate membrane exvagination processes including multivesicular body (MVB) formation, enveloped virus budding, and membrane abscission during cytokinesis. The AAA-ATPase Vps4 is required for ESCRT-III disassembly, however the coordination of Vps4 ATP hydrolysis with ESCRT-III binding and disassembly is not understood. Vps4 ATP hydrolysis has been proposed to execute ESCRT-III disassembly as either a stable oligomer or an unstable oligomer whose dissociation drives ESCRT-III disassembly. An in vitro ESCRT-III disassembly assay was developed to analyze Vps4 function during this process. The studies presented here support a model in which Vps4 acts as a stable oligomer during ATP hydrolysis and ESCRT-III disassembly. Moreover, Vps4 oligomer binding to ESCRT-III induces coordination of ATP hydrolysis at the level of individual Vps4 subunits. These results suggest that Vps4 functions as a stable oligomer that acts upon individual ESCRT-III subunits to facilitate ESCRT-III disassembly.

  14. Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

    Directory of Open Access Journals (Sweden)

    Anjar Priyono

    2016-11-01

    Full Text Available Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to

  15. Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

    International Nuclear Information System (INIS)

    Priyono, A.; Ijomah, W.; Bititci, U.

    2016-01-01

    Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to develop an index of

  16. Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

    Energy Technology Data Exchange (ETDEWEB)

    Priyono, A.; Ijomah, W.; Bititci, U.

    2016-07-01

    Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to develop an index of

  17. An Entropy-Based Adaptive Hybrid Particle Swarm Optimization for Disassembly Line Balancing Problems

    Directory of Open Access Journals (Sweden)

    Shanli Xiao

    2017-11-01

    Full Text Available In order to improve the product disassembly efficiency, the disassembly line balancing problem (DLBP is transformed into a problem of searching for the optimum path in the directed and weighted graph by constructing the disassembly hierarchy information graph (DHIG. Then, combining the characteristic of the disassembly sequence, an entropy-based adaptive hybrid particle swarm optimization algorithm (AHPSO is presented. In this algorithm, entropy is introduced to measure the changing tendency of population diversity, and the dimension learning, crossover and mutation operator are used to increase the probability of producing feasible disassembly solutions (FDS. Performance of the proposed methodology is tested on the primary problem instances available in the literature, and the results are compared with other evolutionary algorithms. The results show that the proposed algorithm is efficient to solve the complex DLBP.

  18. Innovation and employee injury risk in automotive disassembly operations

    DEFF Research Database (Denmark)

    Neumann, W. Patrick; Winkel, Jørgen; Palmerud, Gunnar

    2018-01-01

    to control injury hazards as part of the development and design process. These cases suggest how failure to manage RSI hazards in the innovation process may allow increases of injury risks that can compromise operational performance. This ‘innovation pitfall’ has implications for operator health...... increased movement speeds and reduced muscular recovery opportunities, implying increased RSI risk. This case study reveals a mechanism by which innovation may increase RSI risks for operators. Managers responsible for engineering innovation should ensure their teams have the tools and mandate necessary......Engineering innovations in car disassembly systems are studied for affects on system operators’ risk of repetitive strain injury (RSI). Objective instrumented measures of injury risk factors with synchronised video-based task analyses were used to examine changes in operators’ RSI risk during...

  19. Maintenance and disassembly considerations for the Technology Demonstration Facility

    International Nuclear Information System (INIS)

    Spampinato, P.T.

    1983-01-01

    The Technology Demonstration Facility (TDF) is a tandem-mirror design concept carried out under the direction of Lawrence Livermore National Laboratory. It was conceived as a near-term device with a mission of developing engineering technology in a D-T fusion environment. Overall maintenance and component disassembly were among the responsibilities of the Fusion Engineering Design Center (FEDC). A configuration evolved that was based on the operational requirements of the components, as well as the requirements for their replacements. Component lifetime estimates were used to estimate the frequency and the number of replacements. In addition, it was determined that the need for remote handling equipment followed within 1.5 years after initial start-up, emphasizing the direct relationship between developing maintenance scenarios/equipment and the device configuration. Many of the scheduled maintenance operations were investigated to first order, and preliminary handling equipment concepts were developed

  20. Introductory Education for Mechanical Engineering by Exercise in Mechanical Disassembly

    Science.gov (United States)

    Matsui, Yoshio; Asakawa, Naoki; Iwamori, Satoru

    An introductory program “Exercise for engineers in mechanical disassembly” is an exercise that ten students of every team disassemble a motor scooter to the components and then assemble again to the initial form in 15 weeks. The purpose of this program is to introduce mechanical engineering by touching the real machine and learning how it is composed from various mechanical parts to the students at the early period after the entrance into the university. Additional short lectures by young teachers and a special lecture by a top engineer in the industry encourage the students to combine the actual machine and the mechanical engineering subjects. Furthermore, various educations such as group leader system, hazard prediction training, parts filing are included in this program. As a result, students recognize the importance of the mechanical engineering study and the way of group working.

  1. Knowledge of damage identification about tensegrities via flexibility disassembly

    Science.gov (United States)

    Jiang, Ge; Feng, Xiaodong; Du, Shigui

    2017-12-01

    Tensegrity structures composing of continuous cables and discrete struts are under tension and compression, respectively. In order to determine the damage extents of tensegrity structures, a new method for tensegrity structural damage identification is presented based on flexibility disassembly. To decompose a tensegrity structural flexibility matrix into the matrix represention of the connectivity between degress-of-freedoms and the diagonal matrix comprising of magnitude informations. Step 1: Calculate perturbation flexibility; Step 2: Compute the flexibility connectivity matrix and perturbation flexibility parameters; Step 3: Calculate the perturbation stiffness parameters. The efficiency of the proposed method is demonstrated by a numeical example comprising of 12 cables and 4 struts with pretensioned. Accurate identification of local damage depends on the availability of good measured data, an accurate and reasonable algorithm.

  2. Workshop on instrumentation of the disassembled BER II

    International Nuclear Information System (INIS)

    Jauch, W.; Steiner, M.

    1982-01-01

    A workshop on the instrumentation of a disassembled BER II-reactor took place in the Hahn-Meitner-Institute in Berlin on April 19 and 20, 1982. Invited were all groups that are promoted by the associations 'Neutron Scattering for Investigation of Condensed Substance' and 'Neutron Scattering and Complementary Methods in Chemistry and Biology', along with experts for neutron spectrometers. 40 foreign scientists from 22 different institutes had accepted the invitation. The actual questions were treated in 13 presentations and a certain number of posters, with the latter also comprising activation analysis. The present report contains the presentations submitted, the final discussion minutes and a summary from HMI-view. (orig./RW) [de

  3. A reactor vessel and its internals disassembled and packaged

    International Nuclear Information System (INIS)

    Eisenmann, B.; Prechtl, E.; Suessdorf, W.

    2008-01-01

    2007 was a successful year for the Disassembly Unit of the Karlsruhe Research Center: dismantling the highly activated Karlsruhe Multipurpose Research Reactor (MZFR) was completed successfully and without any incident. A vote of thanks is expressed at this point to all staff members, participating industries and institutions for their extraordinary commitment and their outstanding innovation and work. Preserving and advancing existing knowledge is one of the important pillars securing a sustainable future for generations to come in Germany. Securing and advancing know-how in nuclear technology was defined as a major duty last in late January 2008 by Dr. Peter Fritz, Chairman of the Kerntechnische Gesellschaft e.V. (KTG) and member of the Executive Board of the Karlsruhe Research Center, for instance, in cooperation between the KERNTECHNIK (i.e. nuclear technology) Southwestern Research and Teaching Association and the Karlsruhe Institute of Technology (KIT). The borders of Germany do not constitute a natural radiological barrier, despite the efforts by political groups in this country to convey this impression. This report therefore is to document that the demolition of a nuclear reactor with a high radioactivity inventory can be managed safely. In the light of the experience accumulated with the MZFR, this is feasible only if demolition is carried out immediately instead of the 'problem' of disassembly and conditioning being shifted to future generations. The article is also meant to be a piece of advice by showing the unplannable difficulties which came up, and the technical solutions implemented by the competence team successfully and efficiently. (orig.)

  4. Sequential phosphorylation of GRASP65 during mitotic Golgi disassembly

    Directory of Open Access Journals (Sweden)

    Danming Tang

    2012-09-01

    GRASP65 phosphorylation during mitosis and dephosphorylation after mitosis are required for Golgi disassembly and reassembly during the cell cycle. At least eight phosphorylation sites on GRASP65 have been identified, but whether they are modified in a coordinated fashion during mitosis is so far unknown. In this study, we raised phospho-specific antibodies that recognize phosphorylated T220/T224, S277 and S376 residues of GRASP65, respectively. Biochemical analysis showed that cdc2 phosphorylates all three sites, while plk1 enhances the phosphorylation. Microscopic studies using these antibodies for double and triple labeling demonstrate sequential phosphorylation and dephosphorylation during the cell cycle. S277 and S376 are phosphorylated from late G2 phase through metaphase until telophase when the new Golgi is reassembled. T220/224 is not modified until prophase, but is highly modified from prometaphase to anaphase. In metaphase, phospho-T220/224 signal localizes on both Golgi haze and mitotic Golgi clusters that represent dispersed Golgi vesicles and Golgi remnants, respectively, while phospho-S277 and S376 labeling is more concentrated on mitotic Golgi clusters. Expression of a phosphorylation-resistant GRASP65 mutant T220A/T224A inhibited mitotic Golgi fragmentation to a much larger extent than the expression of the S277A and S376A mutants. In cytokinesis, T220/224 dephosphorylation occurs prior to that of S277, but after S376. This study provides evidence that GRASP65 is sequentially phosphorylated and dephosphorylated during mitosis at different sites to orchestrate Golgi disassembly and reassembly during cell division, with phosphorylation of the T220/224 site being most critical in the process.

  5. A methodological approach for designing and sequencing product families in Reconfigurable Disassembly Systems

    Directory of Open Access Journals (Sweden)

    Ignacio Eguia

    2011-10-01

    Full Text Available Purpose: A Reconfigurable Disassembly System (RDS represents a new paradigm of automated disassembly system that uses reconfigurable manufacturing technology for fast adaptation to changes in the quantity and mix of products to disassemble. This paper deals with a methodology for designing and sequencing product families in RDS. Design/methodology/approach: The methodology is developed in a two-phase approach, where products are first grouped into families and then families are sequenced through the RDS, computing the required machines and modules configuration for each family. Products are grouped into families based on their common features using a Hierarchical Clustering Algorithm. The optimal sequence of the product families is calculated using a Mixed-Integer Linear Programming model minimizing reconfigurability and operational costs. Findings: This paper is focused to enable reconfigurable manufacturing technologies to attain some degree of adaptability during disassembly automation design using modular machine tools. Research limitations/implications: The MILP model proposed for the second phase is similar to the well-known Travelling Salesman Problem (TSP and therefore its complexity grows exponentially with the number of products to disassemble. In real-world problems, which a higher number of products, it may be advisable to solve the model approximately with heuristics. Practical implications: The importance of industrial recycling and remanufacturing is growing due to increasing environmental and economic pressures. Disassembly is an important part of remanufacturing systems for reuse and recycling purposes. Automatic disassembly techniques have a growing number of applications in the area of electronics, aerospace, construction and industrial equipment. In this paper, a design and scheduling approach is proposed to apply in this area. Originality/value: This paper presents a new concept called Reconfigurable Disassembly System

  6. Development of remote disassembly technology for liquid-metal reactor (LMR) fuel

    International Nuclear Information System (INIS)

    Bradley, E.C.; Evans, J.H.; Metz, C.F. III; Weil, B.S.

    1990-01-01

    A major objective of the Consolidated Fuel Reprocessing Program (CFRP) is to develop equipment and demonstrate technology to reprocess fast breeder reactor fuel. Experimental work on fuel disassembly cutting methods began in the 1970s. High-power laser cutting was selected as the preferred cutting method for fuel disassembly. Remotely operated development equipment was designed, fabricated, installed, and tested at Oak Ridge National Laboratory (ORNL). Development testing included remote automatic operation, remote maintenance testing, and laser cutting process development. This paper summarizes the development work performed at ORNL on remote fuel disassembly. 2 refs., 1 fig

  7. Balancing Disassembly Line in Product Recovery to Promote the Coordinated Development of Economy and Environment

    Directory of Open Access Journals (Sweden)

    Jia Liu

    2017-02-01

    Full Text Available For environmentally conscious and sustainable manufacturing, many more manufacturers are acting to recycle and remanufacture their post-consumed products. The most critical process of remanufacturing is disassembly, since it allows for the selective extraction of the valuable components and materials from returned products to reduce the waste disposal volume. It is, therefore, important to design and balance the disassembly line to work efficiently due to its vital role in effective resource usage and environmental protection. Considering the disassembly precedence relationships and sequence-dependent parts removal time increments, this paper presents an improved discrete artificial bee colony algorithm (DABC for solving the sequence-dependent disassembly line balancing problem (SDDLBP. The performance of the proposed algorithm was tested against nine other approaches. Computational results evidently indicate the superior efficiency of the proposed algorithm for addressing the environmental and economic concerns while optimizing the multi-objective SDDLBP.

  8. Disassembly Properties of Cementitious Finish Joints Using an Induction Heating Method

    Science.gov (United States)

    Ahn, Jaecheol; Noguchi, Takafumi; Kitagaki, Ryoma

    2015-01-01

    Efficient maintenance and upgrading of a building during its lifecycle are difficult because a cementitious finish uses materials and parts with low disassembly properties. Additionally, the reuse and recycling processes during building demolition also present numerous problems from the perspective of environmental technology. In this study, an induction heating (IH) method was used to disassemble cementitious finish joints, which are widely used to join building members and materials. The IH rapidly and selectively heated and weakened these joints. The temperature elevation characteristics of the cementitious joint materials were measured as a function of several resistor types, including wire meshes and punching metals, which are usually used for cementitious finishing. The disassembly properties were evaluated through various tests using conductive resistors in cementitious joints such as mortar. When steel fiber, punching metal, and wire mesh were used as conductive resistors, the cementitious modifiers could be weakened within 30 s. Cementitious joints with conductive resistors also showed complete disassembly with little residual bond strength.

  9. Direct measurement of conformational strain energy in protofilaments curling outward from disassembling microtubule tips.

    Science.gov (United States)

    Driver, Jonathan W; Geyer, Elisabeth A; Bailey, Megan E; Rice, Luke M; Asbury, Charles L

    2017-06-19

    Disassembling microtubules can generate movement independently of motor enzymes, especially at kinetochores where they drive chromosome motility. A popular explanation is the 'conformational wave' model, in which protofilaments pull on the kinetochore as they curl outward from a disassembling tip. But whether protofilaments can work efficiently via this spring-like mechanism has been unclear. By modifying a previous assay to use recombinant tubulin and feedback-controlled laser trapping, we directly demonstrate the spring-like elasticity of curling protofilaments. Measuring their mechanical work output suggests they carry ~25% of the energy of GTP hydrolysis as bending strain, enabling them to drive movement with efficiency similar to conventional motors. Surprisingly, a β-tubulin mutant that dramatically slows disassembly has no effect on work output, indicating an uncoupling of disassembly speed from protofilament strain. These results show the wave mechanism can make a major contribution to kinetochore motility and establish a direct approach for measuring tubulin mechano-chemistry.

  10. Disassembled DJ-1 high molecular weight complex in cortex mitochondria from Parkinson's disease patients

    Directory of Open Access Journals (Sweden)

    Adler Charles

    2009-07-01

    Full Text Available Abstract Correction to Nural H, He P, Beach T, Sue L, Xia W, Shen Y. Disassembled DJ-1 high molecular weight complex in cortex mitochondria from Parkinson's disease patients Molecular Neurodegeneration 2009, 4:23.

  11. Decommissioning of nuclear facilities: Decontamination, disassembly and waste management

    International Nuclear Information System (INIS)

    1983-01-01

    The term 'decommissioning', as used within the nuclear industry, means the actions taken at the end of a facility's useful life to retire the facility from service in a manner that provides adequate protection for the health and safety of the decommissioning workers, the general public, and for the environment. These actions can range from merely closing down the facility and a minimal removal of radioactive material coupled with continuing maintenance and surveillance, to a complete removal of residual radioactivity in excess of levels acceptable for unrestricted use of the facility and its site. This latter condition, unrestricted use, is the ultimate goal of all decommissioning actions at retired nuclear facilities. The purpose of this report is to provide an information base on the considerations important to decommissioning, the methods available for decontamination and disassembly of a nuclear facility, the management of the resulting radioactive wastes, and the areas of decommissioning methodology where improvements might be made. Specific sections are devoted to each of these topics, and conclusions are presented concerning the present status of each topic. A summary of past decommissioning experience in Member States is presented in the Appendix. The report, with its discussions of necessary considerations, available operational methods, and waste management practices, together with supporting references, provides an appreciation of the activities that comprise decommissioning of nuclear facilities. It is anticipated that the information presented in the report should prove useful to persons concerned with the development of plans for the decommissioning of retired nuclear facilities

  12. Alpha Decontamination and Disassembly Pilot Facility. Final report

    International Nuclear Information System (INIS)

    Daugherty, B.A.; Clark, H.E.

    1985-04-01

    The Alpha Decontamination and Disassembly (AD and D) Pilot Facility was built to develop and demonstrate a reference process for the decontamination and size reduction of noncombustible transuranic (TRU) waste. The goals of the reference process were to remove >99% of the surface contamination to the high-level waste tanks, and to achieve volume reduction factors greater than 15:1. Preliminary bench-scale decontamination work was accomplished at Savannah River Laboratory (SRL), establishing a reference decontamination process. Initially, the pilot facility did not achieve the decontamination goals. As the program continued, and modifications to the process were made, coupon analysis idicated that 99% of the surface contamination was removed to the high-level drain system. Prior to the AD and D Pilot Facility, no size reduction work had been done at SRL. Several other Department of Energy (DOE) facilities were experimenting with plasma arc torches for size reduction work. Their methods were employed in the AD and D hot cell with moderate success. The experimental work concluded with recommendations for further testing of other size reduction techniques. 11 figs., 6 tabs

  13. Spent-fuel disassembly and canning programs at the Barnwell Nuclear Fuel Plant (BNFP)

    International Nuclear Information System (INIS)

    Townes, G.A.

    1980-02-01

    Doubling pool storage and tripling truck cask shipping capability appear feasible based on preliminary development work performed at the BNFP. This would be accomplished by disassembly of the fuel assembly and canning of the fuel pins. The dry, remote disassembly and canning in the headend cells offer adequate rates, easily controlled operator exposure, and visual inspection of the fuel pins and operations through shielded windows

  14. The effect of sudden server breakdown on the performance of a disassembly line

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.

    2005-11-01

    Product and material recovery relies on the disassembly process to separate target components or materials from the end-of-life (EOL) products. Disassembly line is especially effective when products in large quantity are disassembled. Unlike an assembly line, a disassembly line is more complex and is subjected to numerous uncertainties including stochastic and multi-level arrivals of component demands, stochastic arrival times for EOL products, and process interruption due to equipment failure. These factors seriously impair the control mechanism in the disassembly line. A common production control mechanism is the traditional push system (TPS). TPS responds to the aforementioned complications by carrying substantial amounts of inventories. An alternative control mechanism is a newly developed multi-kanban pull system (MKS) that relies on dynamic routing of kanbans, which tends to minimize the system's inventories while maintaining demand serviceability. In this paper we explore the impact of sudden breakdown of server on the performance of a disassembly line. We compare the overall performances of the TPS and MKS by considering two scenarios. We present the solution procedure and results for these cases.

  15. Studies of fast reactor disassembly using a Bethe-Tait computer code

    International Nuclear Information System (INIS)

    Ludwig, J.C.

    1978-10-01

    The advantages of the fast reactor are given and the general design outlined. Loss of Flow and Transient Overpower faults are possible; the potential consequences of such incidents are analysed using a deterministic approach. The course of an incident is split into several stages; of these only predisassembly and disassembly are considered. Predisassembly computer codes are described in general, and several particular codes are examined in more detail, based on a literature survey. The results and implications of disassembly calculations using the code EXTRA are presented. Here, the effects of several factors, such as the presence of retained fission gases and possible restraints on fuel motion, are investigated. Some comparisons are made with published results from the VENUS-II disassembly code. A general conclusion is that under some circumstances, the yield predicted during disassembly is relatively insensitive to modelling assumptions, and a simple code such as EXTRA may prove adequate if explicit core displacements are not required. A major factor in determining the yield of the disassembly phase is confirmed as being the rate of reactivity insertion during disassembly, as predicted by a predisassembly code. (U.K.)

  16. Out pile test of a disassembly tool for the intermediate examination of nuclear fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jintae; Joung, Chang-Young; Ahn, Sung-Ho; Yang, Tae-Ho; Jang, Seo-Yoon; Park, Seung-Jae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The two fuel rod assemblies are assembled with a bayonet coupler, and the non-instrumented fuel rod assembly can be disassembled for intermediate examination. A tool to disassemble the non-instrumented fuel rod assembly from the test rig was developed, and steel wires are connected to the tool to operate release function. In this study, an assembly plug with a quick plug typed bayonet coupler and the accompanying disassembly tool was designed to prevent the interference problem. A test rig mockup was fabricated, and performance test was carried out in the laboratory. And, the out pile test was also carried out in the single channel test loop established in the KAERI. In this study, a modified coupler design to disassemble the non-instrumented fuel rod assembly from the test rig for the intermediate examination was suggested to solve interference problem of previous design. The performance of the modified design was verified by test mockup fabricated with the modified coupler design and accompanied disassembly tool design. Finally, out pile test was carried out in the single channel test loop in the KAERI, and the test rig and the disassembly tool showed good performance and reliability. The developed technique will be useful to the periodic intermediate examination of nuclear fuel rods.

  17. Out pile test of a disassembly tool for the intermediate examination of nuclear fuel rods

    International Nuclear Information System (INIS)

    Hong, Jintae; Joung, Chang-Young; Ahn, Sung-Ho; Yang, Tae-Ho; Jang, Seo-Yoon; Park, Seung-Jae

    2016-01-01

    The two fuel rod assemblies are assembled with a bayonet coupler, and the non-instrumented fuel rod assembly can be disassembled for intermediate examination. A tool to disassemble the non-instrumented fuel rod assembly from the test rig was developed, and steel wires are connected to the tool to operate release function. In this study, an assembly plug with a quick plug typed bayonet coupler and the accompanying disassembly tool was designed to prevent the interference problem. A test rig mockup was fabricated, and performance test was carried out in the laboratory. And, the out pile test was also carried out in the single channel test loop established in the KAERI. In this study, a modified coupler design to disassemble the non-instrumented fuel rod assembly from the test rig for the intermediate examination was suggested to solve interference problem of previous design. The performance of the modified design was verified by test mockup fabricated with the modified coupler design and accompanied disassembly tool design. Finally, out pile test was carried out in the single channel test loop in the KAERI, and the test rig and the disassembly tool showed good performance and reliability. The developed technique will be useful to the periodic intermediate examination of nuclear fuel rods

  18. Effects of reactive oxygen species on cellular wall disassembly of banana fruit during ripening.

    Science.gov (United States)

    Cheng, Guiping; Duan, Xuewu; Shi, John; Lu, Wangjin; Luo, Yunbo; Jiang, Weibo; Jiang, Yueming

    2008-07-15

    Fruit softening is generally attributed to cell wall disassembly. Experiments were conducted to investigate effects of various reactive oxygen species (ROS) on in vitro cellular wall disassembly of harvested banana fruit. The alcohol-extracted insoluble residue (AEIR) was obtained from the pulp tissues of banana fruit at various ripening stages and then used to examine the disassembly of cellular wall polysaccharides in the presence of superoxide anion (O2(-)), hydrogen peroxide (H2O2) or hydroxyl radical (OH) and their scavengers. The presence of OH accelerated significantly disassembly of cellular wall polysaccharides in terms of the increase in contents of total sugars released and uronic acid, and the decrease in molecular mass of soluble polysaccharides, using gel permeation chromatography. However, the treatment with H2O2 or O2(-) showed no significant effect on the disassembly of cellular wall polysaccharides. Furthermore, the degradation of the de-esterified AEIR was more susceptible to OH attack than the esterified AEIR. In addition, the effect of OH could be inhibited in the presence of OH scavenger. This study suggests that disassembly of cellular wall polysaccharides could be initiated by OH as the solublisation of the polysaccharides increased, which, in turn, accelerated fruit softening. Copyright © 2008 Elsevier Ltd. All rights reserved.

  19. Selenide isotope generator for the Galileo mission. GDS disassembly report

    International Nuclear Information System (INIS)

    1978-11-01

    The GDS-1 was disassembled to determine the cause for the rapid degradation of the output power. Unfortunately, it was not possible to relate the observations to direct causes for the degradation. However, some positive statements can be made which have an impact on the flight program. First, the outgassing and gas management techniques were shown to be adequate to maintain clean conditions within the generator. Second, the non-modular components within the generator including the receptacles on the housing were not affected by the thermal environment during operation of GDS-1. Third, a significant amount of sublimation of the P-legs has occurred during the relatively short life of 2000 + hours as shown by the bullet nosing of the legs and deposits on the cold end hardware. The fact that the generator atmosphere was not 100% xenon may have some bearing on this observation but the statement is still accurate. Fourth, all exposed N-legs display cracks and/or chips. Fifth, a great deal of misalignment of both N and P-legs was seen both visually and with radiographs. Although no definite conclusions can be made concerning the cause for the rapid degradation of performance, several of the observed conditions within the module could possibly contribute to that fact. They are: cracks in N-legs (increased resistance); deposits on edges of BeO discs (shorting of thermoelectric circuit); and bullet nosing of P-legs (increased resistance). It remains to be shown if any of these effects or the follower hangup described earlier contributed to the poor performance of GDS-1 or if another effect as yet unknown was the important factor

  20. Accomplishment of JT-60U disassembly work dealing with radioactive components

    International Nuclear Information System (INIS)

    Ikeda, Yoshitaka

    2015-01-01

    The upgrade of the JT-60U to the superconducting tokamak 'JT-60SA' has been carried out to contribute the early realization of fusion energy by addressing key physics issues relevant for ITER and DEMO. Disassembly of the JT-60U tokamak was required so as to newly install the JT-60SA torus at the same position in the torus hall. The JT-60U tokamak was featured by the complicated and welded structure against the strong electromagnetic force, and by the radioactivation due to deuterium-deuterium (D-D) reactions of 1.5x10"2"0 (n) in total. Since this work was the first experience of disassembling a large radioactivated fusion device in Japan, careful preparations of disassembly activities, including treatment of the radioactivated materials and safety work, have been made. About 13,000 components with a total weight of more than 5,400 tonnes were removed from the torus hall and stored safely in storage facilities. All disassembly components were stored with recording the data such as dose rate, weight and kind of material, so as to apply the clearance level regulation in future. It was confirmed that the main radioactive material of the disassembly components was the stainless steel and that its dose rate was almost background level (∼0.1 μSv/h) at ∼10 m far from the vacuum vessel. It seems that the disassembly components with background dose level are in the clearance level. The assembly of JT-60SA tokamak has started in January 2013 after this disassembly of the JT-60U tokamak. (author)

  1. A Label Correcting Algorithm for Partial Disassembly Sequences in the Production Planning for End-of-Life Products

    Directory of Open Access Journals (Sweden)

    Pei-Fang (Jennifer Tsai

    2012-01-01

    Full Text Available Remanufacturing of used products has become a strategic issue for cost-sensitive businesses. Due to the nature of uncertain supply of end-of-life (EoL products, the reverse logistic can only be sustainable with a dynamic production planning for disassembly process. This research investigates the sequencing of disassembly operations as a single-period partial disassembly optimization (SPPDO problem to minimize total disassembly cost. AND/OR graph representation is used to include all disassembly sequences of a returned product. A label correcting algorithm is proposed to find an optimal partial disassembly plan if a specific reusable subpart is retrieved from the original return. Then, a heuristic procedure that utilizes this polynomial-time algorithm is presented to solve the SPPDO problem. Numerical examples are used to demonstrate the effectiveness of this solution procedure.

  2. Centralized disassembly and packaging of spent fuel in the DOE spent fuel management system

    International Nuclear Information System (INIS)

    Johnson, E.R.

    1986-01-01

    In October 1984, E.R. Johnson Associates, Inc. (JAI) initiated a study of the prospective use of a centralized facility for the disassembly and packaging of spent fuel to support the various elements of the US Dept. of Energy (DOE) spent fuel management system, including facilities for monitored retrievable storage (MRS) and repositories. It was DOE's original plan to receive spent fuel at each repository where it would be disassembled and packaged (overpacked) for disposal purposes. Subsequently, DOE considered the prospective use of MRS of spent fuel as an option for providing safe and reliable management of spent fuel. This study was designed to consider possible advantages of the use of centralized facilities for disassembly and packaging of spent fuel at whose location storage facilities could be added as required. The study was divided into three principal technical tasks that covered: (a) development of requirements and criteria for the central disassembly and packaging facility and associated systems. (2) Development of conceptual designs for the central disassembly and packaging facility and associated systems. (3) Estimation of capital and operating costs involved for all system facilities and determination of life cycle costs for various scenarios of operation - for comparison with the reference system

  3. Shape memory polymer nanocomposites for application of multiple-field active disassembly: experiment and simulation.

    Science.gov (United States)

    Carrell, John; Zhang, Hong-Chao; Wang, Shiren; Tate, Derrick

    2013-11-19

    Active disassembly (AD) uses innovative materials that can perform a designed disassembly action by the application of an external field. AD provides improvements over current disassembly processes by limiting machine or manual labor and enabling batch processing for end-of-life products. With improved disassembly operations, more reuse of components and purer recycling streams may be seen. One problem with AD, however, has been with the single-field actuation because of the probability of accidental disassembly. This presentation will discuss the application of shape memory polymer (SMP) nanocomposites in a new AD process. This novel AD process requires multiple-field actuation of the SMP nanocomposite fastener. In the analysis of this AD process, thermal and magnetic field tests were performed on the SMP nanocomposite. From these tests, finite-element analysis was performed to model and simulate the multiple-field AD process. The results of the simulations provide performance variables for the AD process and show a better performance time for the SMP nanocomposite fastener than for a comparable SMP fastener.

  4. Mathematical and Simulation Modelling of Moisture Diffusion Mechanism during Plastic IC Packages Disassembly

    Directory of Open Access Journals (Sweden)

    Peng Mou

    2013-01-01

    Full Text Available Reuse of plastic IC packages disassembled from printed circuit boards (PCBs has significant environmental benefits and economic value. The interface delamination caused by moisture diffusion is the main failure mode of IC packages during the disassembling process, which greatly reduces the reusability and reliability of disassembled IC packages. Exploring moisture diffusion mechanism is a prerequisite to optimize prebaking processes before disassembling that is an effective way to avoid the interface delamination. To this end, a computational model with variable boundary conditions is developed based on the different combination state of water in IC packages. The distribution characteristics and mechanism of moisture diffusion behavior are analyzed including the humidity distribution field and the relation among baking temperature, water loss rate, and baking time during baking process, and then the results are validated by FEA simulation based on the improved definition of relative moisture concentration. Baking under variable temperature is proposed and compared with the baking process and baking efficiency under constant temperature to find out the optimized baking parameters. Finally, a set of curves which indicate the relation between baking energy consumption and temperature are determined under actual industrial baking experiments, which could be used as references to develop industrial standards for PCB disassembling process.

  5. An Intelligent Agent-Controlled and Robot-Based Disassembly Assistant

    Science.gov (United States)

    Jungbluth, Jan; Gerke, Wolfgang; Plapper, Peter

    2017-09-01

    One key for successful and fluent human-robot-collaboration in disassembly processes is equipping the robot system with higher autonomy and intelligence. In this paper, we present an informed software agent that controls the robot behavior to form an intelligent robot assistant for disassembly purposes. While the disassembly process first depends on the product structure, we inform the agent using a generic approach through product models. The product model is then transformed to a directed graph and used to build, share and define a coarse disassembly plan. To refine the workflow, we formulate “the problem of loosening a connection and the distribution of the work” as a search problem. The created detailed plan consists of a sequence of actions that are used to call, parametrize and execute robot programs for the fulfillment of the assistance. The aim of this research is to equip robot systems with knowledge and skills to allow them to be autonomous in the performance of their assistance to finally improve the ergonomics of disassembly workstations.

  6. Design and analysis of sustainable computer mouse using design for disassembly methodology

    Science.gov (United States)

    Roni Sahroni, Taufik; Fitri Sukarman, Ahmad; Agung Mahardini, Karunia

    2017-12-01

    This paper presents the design and analysis of computer mouse using Design for Disassembly methodology. Basically, the existing computer mouse model consist a number of unnecessary part that cause the assembly and disassembly time in production. The objective of this project is to design a new computer mouse based on Design for Disassembly (DFD) methodology. The main methodology of this paper was proposed from sketch generation, concept selection, and concept scoring. Based on the design screening, design concept B was selected for further analysis. New design of computer mouse is proposed using fastening system. Furthermore, three materials of ABS, Polycarbonate, and PE high density were prepared to determine the environmental impact category. Sustainable analysis was conducted using software SolidWorks. As a result, PE High Density gives the lowers amount in the environmental category with great maximum stress value.

  7. Development of the spent fuel disassembling process by utilizing the 3D graphic design technology

    International Nuclear Information System (INIS)

    Song, T. K.; Lee, J. Y.; Kim, S. H.; Yun, J. S.

    2001-01-01

    For developing the spent fuel disassembling process, the 3D graphic simulation has been established by utilizing the 3D graphic design technology which is widely used in the industry. The spent fuel disassembling process consists of a downender, a rod extraction device, a rod cutting device, a pellet extracting device and a skeleton compaction device. In this study, the 3D graphical design model of these devices is implemented by conceptual design and established the virtual workcell within kinematics to motion of each device. By implementing this graphic simulation, all the unit process involved in the spent fuel disassembling processes are analyzed and optimized. The 3D graphical model and the 3D graphic simulation can be effectively used for designing the process equipment, as well as the optimized process and maintenance process

  8. Advanced disassembling technique of irradiated driver fuel assembly for continuous irradiation of fuel pins

    International Nuclear Information System (INIS)

    Ichikawa, Shoichi; Haga, Hiroyuki; Katsuyama, Kozo; Maeda, Koji; Nishinoiri, Kenji

    2012-01-01

    It was necessary to carry out continuous irradiation tests in order to obtain the irradiation data of high burn-up fuel and high neutron dose material for FaCT (Fast Reactor Cycle Technology Development) project. There, the disassembling technique of an irradiated fuel assembly was advanced in order to realize further continuous irradiation tests. Although the conventional disassembling technique had been cutting a lower end-plug of a fuel pin needed to fix fuel pins to an irradiation vehicle, the advanced disassembling technique did not need cutting a lower end-plug. As a result, it was possible to supply many irradiated fuel pins to various continuous irradiation tests for FaCT project. (author)

  9. Pilot scale, alpha disassembly and decontamination facility at the Savannah River Laboratory

    International Nuclear Information System (INIS)

    Cadieux, J.R.; Becker, G.W. Jr.; Richardson, G.W.; Coogler, A.L.

    1982-01-01

    An alpha-contained pilot facility is being built at the Savannah River Laboratory (SRL) for research into the disassembly and dcontamination of noncombustible, Transuranic (TRU) waste. The design and program objectives for the facility are presented along with the initial test results from laboratory scale decontamination experiments with Pu-238 and Cm-244

  10. Phosphatase PP2A and microtubule-mediated pulling forces disassemble centrosomes during mitotic exit

    Directory of Open Access Journals (Sweden)

    Stephen J. Enos

    2018-01-01

    Full Text Available Centrosomes are microtubule-nucleating organelles that facilitate chromosome segregation and cell division in metazoans. Centrosomes comprise centrioles that organize a micron-scale mass of protein called pericentriolar material (PCM from which microtubules nucleate. During each cell cycle, PCM accumulates around centrioles through phosphorylation-mediated assembly of PCM scaffold proteins. During mitotic exit, PCM swiftly disassembles by an unknown mechanism. Here, we used Caenorhabditis elegans embryos to determine the mechanism and importance of PCM disassembly in dividing cells. We found that the phosphatase PP2A and its regulatory subunit SUR-6 (PP2ASUR-6, together with cortically directed microtubule pulling forces, actively disassemble PCM. In embryos depleted of these activities, ∼25% of PCM persisted from one cell cycle into the next. Purified PP2ASUR-6 could dephosphorylate the major PCM scaffold protein SPD-5 in vitro. Our data suggest that PCM disassembly occurs through a combination of dephosphorylation of PCM components and force-driven fragmentation of the PCM scaffold.

  11. Optimization of Two-Level Disassembly/Remanufacturing/Assembly System with an Integrated Maintenance Strategy

    Directory of Open Access Journals (Sweden)

    Zouhour Guiras

    2018-04-01

    Full Text Available With an increase of environmental pressure on economic activities, reverse flow is increasingly important. It seeks to save resources, eliminate waste, and improve productivity. This paper investigates the optimization of the disassembly, remanufacturing and assembly system, taking into account assembly-disassembly system degradation. An analytical model is developed to consider disassembly, remanufacturing of used/end-of-life product and assembly of the finished product. The finished product is composed of remanufactured and new components. A maintenance policy is sequentially integrated to reduce the system unavailability. The aim of this study is to help decision-makers, under certain conditions, choose the most cost-effective process for them to satisfy the customer as well as to adapt to the potential risk that can perturb the disassembly-assembly system. A heuristic is developed to determine the optimal ordered date of the used end-of-life product as well as the optimum release dates of new external components. The results reveal that considering some remanufacturing and purchase components costs, the proposed model is more economical in comparison with a model without remanufactured parts. Numerical results are provided to illustrate the impact of the variation of the ordering cost and quality of the used end-of-life product on the system profitability. Finally, the risk due to system repair periods is discussed, which has an impact on managerial decision-making.

  12. Improved Nondestructive Disassembly Process using Augmented Reality and RFID Product/Part Tracking

    Directory of Open Access Journals (Sweden)

    Ile Mircheski

    2017-11-01

    Full Text Available The waste from electric and electronic equipment and discarded automobiles in the past grew rapidly and resulted with waste in billions of tones. The aim of this paper is to present an improved non-destructive disassembly process of electromechanical products using augmented reality based devices, such as glasses, tablets or mobile phones, and RFID technology for valuable product/part tracking. The proposed method includes tagging of components of interest in the product assembly by using a RFID tag. The valuable product is marked with specific ID number written in the RFID tag, in order to declare the product. The relevant data such as material and weight of components, guidelines for non-destructive disassembly for the valuable product and removing of component of interest will be obtained with the assistance of RFID tag and a centralized database. This modular system offers guidelines for the non-destructive disassembly process for obtaining valuable component of interest intended for easy repairs, remanufacture, reuse or recycling. The guidelines are in video presentation format using augmented reality for easy visualization of non-destructive disassembly process. The benefits of proposed modular system includes biggest percentage of reuse of the valuable components, easy maintaining, improved material recycling, environmental protection and greater total return form end of life products.

  13. Hybrid disassembly system for cellular telephone end-of-life treatment

    Energy Technology Data Exchange (ETDEWEB)

    Kniebel, M.; Basdere, B.; Seliger, G. [Technical Univ. Berlin, Inst. for Machine Tools and Factory Management, Dept. of Assembly Technology and Factory Management, Berlin (Germany)

    2004-07-01

    Concern over the negative environmental impacts associated with the production, use, and end-of-life (EOL) of cellular telephones is particularly high due to large production volumes and characteristically short time scales of technological and stylistic obsolescence. Landfilled or incinerated cellular telephones create the potential for release of toxic substances. The European legislation has passed the directive on Waste of Electrical and Electronic Equipment (WEEE) to regulate their collection and appropriate end-of-life treatment. Manufacturers must conduct material recycling or remanufacturing processes to recover resources. While recovery rates can hardly be met economically by material recycling, remanufacturing and reusing cellular phones is developing into a reasonable alternative. Both end-of-life options require disassembly processes for WEEE compliant treatment. Due to the high number of different cell phone variants and their typical design that fits components into tight enclosing spaces, cellular phone disassembly becomes a challenging task. These challenges and the expected high numbers of phones to be returned in the course of the WEEE urges for automated disassembly. A hybrid disassembly system has been developed to ensure the mass-treatment of obsolete cellular phones. It has been integrated into a prototypical remanufacturing factory for cellular phones that has been planned based on market data. (orig.)

  14. Conceptual design report for the mechanical disassembly of Fort St. Vrain fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Lord, D.L. [Westinghouse Idaho Nuclear Co., Inc., Idaho Falls, ID (United States); Wadsworth, D.C.; Sekot, J.P.; Skinner, K.L. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1993-04-01

    A conceptual design study was prepared that: (1) reviewed the operations necessary to perform the mechanical disassembly of Fort St. Vrain fuel elements; (2) contained a description and survey of equipment capable of performing the necessary functions; and (3) performed a tradeoff study for determining the preferred concepts and equipment specifications. A preferred system was recommended and engineering specifications for this system were developed.

  15. Nano-functionalized filamentous fungus hyphae with fast reversible macroscopic assembly & disassembly features.

    Science.gov (United States)

    Wang, Haiying; Li, Xiaorui; Chai, Liyuan; Zhang, Liyuan

    2015-05-18

    A uniform decoration of hyphae by polyaniline nanoparticles (PANI NPs) was achieved here. This novel hybrid structure can be effectively assembled into a film by filtration and disassembled in water by shaking. This reversible process is very fast, which promises applications in nanomaterials including adsorption.

  16. Conceptual design report for the mechanical disassembly of Fort St. Vrain fuel elements

    International Nuclear Information System (INIS)

    Lord, D.L.; Wadsworth, D.C.; Sekot, J.P.; Skinner, K.L.

    1993-04-01

    A conceptual design study was prepared that: (1) reviewed the operations necessary to perform the mechanical disassembly of Fort St. Vrain fuel elements; (2) contained a description and survey of equipment capable of performing the necessary functions; and (3) performed a tradeoff study for determining the preferred concepts and equipment specifications. A preferred system was recommended and engineering specifications for this system were developed

  17. DISA- a computer code for accident analysis of fast reactor during disassembly phase

    International Nuclear Information System (INIS)

    Yadav, R.D.S.; Gupta, H.P.

    2005-01-01

    Analysis of the hypothetical transients in fast rectors that result in the disassembly of the reactor generally consists of three phases. In the phase-l, some initiating event like control rod ejection, coolant pump failure etc. is assumed to have taken place which leads the reactor to prompt critical state where fuel melting, sodium voiding etc. take place. In fast reactor normally the fuel is not in the optimum shape and further positive reactivity may be introduced into the system due to fuel melting. Fuel slumping is assumed to take place in this phase. If prompt criticality is reached as a result of the first phase, then disassembly phase is assumed to start. In this phase the neutron transient is followed till it is terminated by the disassembly of the core which takes place due to generation of high pressure gradients and which lead the core material to move from more worth region to less worth region. Doppler feed back is taken into account and reactivity feedback due to material movement is calculated by solving the hydrodynamics equations. The third phase will calculate the effect of this transient on the reactor vessel and containment. A computer code DISA for fast reactor DISAssembly phase, which is similar to the well known code VENUS has been developed. (author)

  18. Pit disassembly and conversion demonstration environmental assessment and research and development activities

    International Nuclear Information System (INIS)

    1998-08-01

    A significant portion of the surplus plutonium is in the form of pits, a nuclear weapons component. Pits are composed of plutonium which is sealed in a metallic shell. These pits would need to be safely disassembled and permanently converted to an unclassified form that would be suitable for long-term disposition and international inspection. To determine the feasibility of an integrated pit disassembly and conversion system, a Pit Disassembly and Conversion Demonstration is proposed to take place at the Los Alamos National Laboratory (LANL). This demonstration would be done in existing buildings and facilities, and would involve the disassembly of up to 250 pits and conversion of the recovered plutonium to plutonium metal ingots and plutonium dioxide. This demonstration also includes the conversion of up to 80 kilograms of clean plutonium metal to plutonium dioxide because, as part of the disposition process, some surplus plutonium metal may be converted to plutonium dioxide in the same facility as the surplus pits. The equipment to be used for the proposed demonstration addressed in this EA would use some parts of the Advanced Recovery and Integrated Extraction System (ARIES) capability, other existing equipment/capacities, plus new equipment that was developed at other sites. In addition, small-scale R and D activities are currently underway as part of the overall surplus plutonium disposition program. These R and D activities are related to pit disassembly and conversion, MOX fuel fabrication, and immobilization (in glass and ceramic forms). They are described in Section 7.0. On May 16, 1997, the Office of Fissile Materials Disposition (MD) notified potentially affected states and tribes that this EA would be prepared in accordance with NEPA. This EA has been prepared to provide sufficient information for DOE to determine whether a Finding of No Significant Impact (FONSI) is warranted or whether an EIS must be prepared

  19. Disassembly and physical separation of electric/electronic components layered in printed circuit boards (PCB).

    Science.gov (United States)

    Lee, Jaeryeong; Kim, Youngjin; Lee, Jae-chun

    2012-11-30

    Although printed circuit boards (PCBs) contain various elements, only the major elements (i.e., those with content levels in wt% or over grade) of and precious metals (e.g., Ag, Au, and platinum groups) contained within PCBs can be recycled. To recover other elements from PCBs, the PCBs should be properly disassembled as the first step of the recycling process. The recovery of these other elements would be beneficial for efforts to conserve scarce resources, reuse electric/electronic components (EECs), and eliminate environmental problems. This paper examines the disassembly of EECs from wasted PCBs (WPCBs) and the physical separation of these EECs using a self-designed disassembling apparatus and a 3-step separation process of sieving, magnetic separation, and dense medium separation. The disassembling efficiencies were evaluated by using the ratio of grinding area (E(area)) and the weight ratio of the detached EECs (E(weight)). In the disassembly treatment, these efficiencies were improved with an increase of grinder speed and grinder height. 97.7% (E(area)) and 98% (E(weight)) could be accomplished ultimately by 3 repetitive treatments at a grinder speed of 5500 rpm and a grinder height of 1.5mm. Through a series of physical separations, most groups of the EECs (except for the diode, transistor, and IC chip groups) could be sorted at a relatively high separation efficiency of about 75% or more. To evaluate the separation efficiency with regard to the elemental composition, the distribution ratio (R(dis)) and the concentration ratio (R(conc)) were used. 15 elements could be separated with the highest R(dis) and R(conc) in the same separated division. This result implies that the recyclability of the elements is highly feasible, even though the initial content in EECs is lower than several tens of mg/kg. Copyright © 2012 Elsevier B.V. All rights reserved.

  20. Modelling disassembled fuel bundles using CATHENA MOD-3.5a under LOCA/LOECC conditions

    Energy Technology Data Exchange (ETDEWEB)

    Lei, Q M; Sanderson, D B; Dutton, R [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs.

    1996-12-31

    CATHENA MOD-3.5a is a multipurpose thermalhydraulic computer code developed primarily to analyse postulated loss-of-coolant scenarios for CANDU nuclear reactors. The code contains a generalized heat transfer package that enables it to model the behaviour of a fuel channel in great detail. Throughout the development of the CATHENA code, considerable effort has been devoted to evaluating, validating and documenting its overall capability as a design and safety assessment tool. Specific attention has focused on its ability to predict fuel channel behaviour under postulated accident conditions. This paper describes an investigation of CATHENA`s ability to predict the thermal-chemical responses of a fuel channel in which the 37-element bundles were assumed to disassemble and rearrange into a closed-packed stack of elements at the bottom of the pressure tube. A representative disassembled bundle geometry was modelled during a simulated loss-of-coolant accident scenario using CATHENA MOD-3.5a/Rev 0, with superheated steam being the only coolant available. Thermal conduction in the radial and circumferential directions was calculated for individual fuel elements, the pressure tube, and the calandria tube. Radiation view factors for the intact and disassembled bundle geometries were calculated using a CATHENA utility program. Inter-element metal-to-metal contact was accounted for using the CATHENA solid-solid contact model. An offset pressure-tube configuration, representing a partially sagged pressure tube, and the effect of steam starvation on the exothermic zirconium-steam reaction, were included in the CATHENA model. The CATHENA-predicted results show a dramatic suppression of heat generation from the zirconium-steam reaction when bundle disassembly is initiated. The predicted results show a smaller temperature increase in the fuel sheaths and the pressure tube for the disassembled bundle geometry, compared to the temperature excursion for the intact bundle. (author

  1. Low cytoplasmic pH reduces ER-Golgi trafficking and induces disassembly of the Golgi apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Soonthornsit, Jeerawat [Laboratory for Cell and Developmental Biology, Department of Molecular Biosciences, Faculty of Life Sciences, Kyoto Sangyo University, Motoyama, Kamigamo, Kita, Kyoto 603-8555 (Japan); Yamaguchi, Yoko; Tamura, Daisuke [Division of Life Sciences, Graduate School of Natural Science and Technology, Kanazawa University, Kakuma, Kanazawa 920-1192 (Japan); Ishida, Ryuichi; Nakakoji, Yoko; Osako, Shiho [Laboratory for Cell and Developmental Biology, Department of Molecular Biosciences, Faculty of Life Sciences, Kyoto Sangyo University, Motoyama, Kamigamo, Kita, Kyoto 603-8555 (Japan); Yamamoto, Akitsugu [Department of Animal Bioscience, Nagahama Institute of Bio-Science and Technology, 266 Tamura, Nagahama, Shiga, 526‐0829 (Japan); Nakamura, Nobuhiro, E-mail: osaru3@cc.kyoto-su.ac.jp [Laboratory for Cell and Developmental Biology, Department of Molecular Biosciences, Faculty of Life Sciences, Kyoto Sangyo University, Motoyama, Kamigamo, Kita, Kyoto 603-8555 (Japan); Division of Life Sciences, Graduate School of Natural Science and Technology, Kanazawa University, Kakuma, Kanazawa 920-1192 (Japan)

    2014-11-01

    The Golgi apparatus was dramatically disassembled when cells were incubated in a low pH medium. The cis-Golgi disassembled quickly, extended tubules and spread to the periphery of cells within 30 min. In contrast, medial- and trans-Golgi were fragmented in significantly larger structures of smaller numbers at a slower rate and remained largely in structures distinct from the cis-Golgi. Electron microscopy revealed the complete disassembly of the Golgi stack in low pH treated cells. The effect of low pH was reversible; the Golgi apparatus reassembled to form a normal ribbon-like structure within 1–2 h after the addition of a control medium. The anterograde ER to Golgi transport and retrograde Golgi to ER transport were both reduced under low pH. Phospholipase A{sub 2} inhibitors (ONO, BEL) effectively suppressed the Golgi disassembly, suggesting that the phospholipase A{sub 2} was involved in the Golgi disassembly. Over-expression of Rab1, 2, 30, 33 and 41 also suppressed the Golgi disassembly under low pH, suggesting that they have protective role against Golgi disassembly. Low pH treatment reduced cytoplasmic pH, but not the luminal pH of the Golgi apparatus, strongly suggesting that reduction of the cytoplasmic pH triggered the Golgi disassembly. Because a lower cytoplasmic pH is induced in physiological or pathological conditions, disassembly of the Golgi apparatus and reduction of vesicular transport through the Golgi apparatus may play important roles in cell physiology and pathology. Furthermore, our findings indicated that low pH treatment can serve as an important tool to analyze the molecular mechanisms that support the structure and function of the Golgi apparatus. - Highlights: • The Golgi apparatus reversibly disassembles by low pH treatment. • The cis-Golgi disassembles quickly generating tubular structures. • Both anterograde and retrograde transport between the ER and the Golgi apparatus are reduced. • Phospholipase A{sub 2} inhibitors (ONO

  2. Low cytoplasmic pH reduces ER-Golgi trafficking and induces disassembly of the Golgi apparatus.

    Science.gov (United States)

    Soonthornsit, Jeerawat; Yamaguchi, Yoko; Tamura, Daisuke; Ishida, Ryuichi; Nakakoji, Yoko; Osako, Shiho; Yamamoto, Akitsugu; Nakamura, Nobuhiro

    2014-11-01

    The Golgi apparatus was dramatically disassembled when cells were incubated in a low pH medium. The cis-Golgi disassembled quickly, extended tubules and spread to the periphery of cells within 30 min. In contrast, medial- and trans-Golgi were fragmented in significantly larger structures of smaller numbers at a slower rate and remained largely in structures distinct from the cis-Golgi. Electron microscopy revealed the complete disassembly of the Golgi stack in low pH treated cells. The effect of low pH was reversible; the Golgi apparatus reassembled to form a normal ribbon-like structure within 1-2h after the addition of a control medium. The anterograde ER to Golgi transport and retrograde Golgi to ER transport were both reduced under low pH. Phospholipase A2 inhibitors (ONO, BEL) effectively suppressed the Golgi disassembly, suggesting that the phospholipase A2 was involved in the Golgi disassembly. Over-expression of Rab1, 2, 30, 33 and 41 also suppressed the Golgi disassembly under low pH, suggesting that they have protective role against Golgi disassembly. Low pH treatment reduced cytoplasmic pH, but not the luminal pH of the Golgi apparatus, strongly suggesting that reduction of the cytoplasmic pH triggered the Golgi disassembly. Because a lower cytoplasmic pH is induced in physiological or pathological conditions, disassembly of the Golgi apparatus and reduction of vesicular transport through the Golgi apparatus may play important roles in cell physiology and pathology. Furthermore, our findings indicated that low pH treatment can serve as an important tool to analyze the molecular mechanisms that support the structure and function of the Golgi apparatus. Copyright © 2014 Elsevier Inc. All rights reserved.

  3. Cleaning, disassembly, and requalification of the FFTF in vessel handling machine

    International Nuclear Information System (INIS)

    Coops, W.J.

    1977-10-01

    The Engineering Model In Vessel Handling Machine (IVHM) was successfully removed, cleaned, disassembled, inspected, reassembled and reinstalled into the sodium test vessel at Richland, Washington. This was the first time in the United States a full size operational sodium wetted machine has been cleaned by the water vapor nitrogen process and requalified for operation. The work utilized an atmospheric control system during removal, a tank type water vapor nitrogen cleaning system and an open ''hands on'' disassembly and assembly stand. Results of the work indicate the tools, process and equipment are adequate for the non-radioactive maintenance sequence. Additionally, the work proves that a machine of this complexity can be successfully cleaned, maintained and re-used without the need to replace a large percentage of the sodium wetted parts

  4. Assembly, operation and disassembly manual for the Battelle Large Volume Water Sampler (BLVWS)

    International Nuclear Information System (INIS)

    Thomas, V.W.; Campbell, R.M.

    1984-12-01

    Assembly, operation and disassembly of the Battelle Large Volume Water Sampler (BLVWS) are described in detail. Step by step instructions of assembly, general operation and disassembly are provided to allow an operator completely unfamiliar with the sampler to successfully apply the BLVWS to his research sampling needs. The sampler permits concentration of both particulate and dissolved radionuclides from large volumes of ocean and fresh water. The water sample passes through a filtration section for particle removal then through sorption or ion exchange beds where species of interest are removed. The sampler components which contact the water being sampled are constructed of polyvinylchloride (PVC). The sampler has been successfully applied to many sampling needs over the past fifteen years. 9 references, 8 figures

  5. A Trio-Rac1-PAK1 signaling axis drives invadopodia disassembly

    Science.gov (United States)

    Moshfegh, Yasmin; Bravo-Cordero, Jose Javier; Miskolci, Veronika; Condeelis, John; Hodgson, Louis

    2014-01-01

    Rho family GTPases control cell migration and participate in the regulation of cancer metastasis. Invadopodia, associated with invasive tumor cells, are crucial for cellular invasion and metastasis. To study Rac1 GTPase in invadopodia dynamics, we developed a genetically-encoded, single-chain Rac1 Fluorescence Resonance Energy Transfer (FRET) biosensor. The biosensor shows Rac1 activity exclusion from the core of invadopodia, and higher activity when invadopodia disappear, suggesting that reduced Rac1 activity is necessary for their stability, and Rac1 activation is involved in disassembly. Photoactivating Rac1 at invadopodia confirmed this previously-unknown Rac1 function. We built an invadopodia disassembly model, where a signaling axis involving TrioGEF, Rac1, PAK1, and phosphorylation of cortactin, causing invadopodia dissolution. This mechanism is critical for the proper turnover of invasive structures during tumor cell invasion, where a balance of proteolytic activity and locomotory protrusions must be carefully coordinated to achieve a maximally invasive phenotype. PMID:24859002

  6. Early cysteine-dependent inactivation of 26S proteasomes does not involve particle disassembly

    Directory of Open Access Journals (Sweden)

    Martín Hugo

    2018-06-01

    Full Text Available Under oxidative stress 26S proteasomes suffer reversible disassembly into its 20S and 19S subunits, a process mediated by HSP70. This inhibits the degradation of polyubiquitinated proteins by the 26S proteasome and allows the degradation of oxidized proteins by a free 20S proteasome. Low fluxes of antimycin A-stimulated ROS production caused dimerization of mitochondrial peroxiredoxin 3 and cytosolic peroxiredoxin 2, but not peroxiredoxin overoxidation and overall oxidation of cellular protein thiols. This moderate redox imbalance was sufficient to inhibit the ATP stimulation of 26S proteasome activity. This process was dependent on reversible cysteine oxidation. Moreover, our results show that this early inhibition of ATP stimulation occurs previous to particle disassembly, indicating an intermediate step during the redox regulation of the 26S proteasome with special relevance under redox signaling rather than oxidative stress conditions.

  7. Underwater Nuclear Fuel Disassembly and Rod Storage Process and Equipment Description. Volume II

    International Nuclear Information System (INIS)

    Viebrock, J.M.

    1981-09-01

    The process, equipment, and the demonstration of the Underwater Nuclear Fuel Disassembly and Rod Storage System are presented. The process was shown to be a viable means of increasing spent fuel pool storage density by taking apart fuel assemblies and storing the fuel rods in a denser fashion than in the original storage racks. The assembly's nonfuel-bearing waste is compacted and containerized. The report documents design criteria and analysis, fabrication, demonstration program results, and proposed enhancements to the system

  8. Remote disassembly of radioactively contaminated vessels by means of an arc saw

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1977-01-01

    The arc saw, a newly developed tool, is a toothless circular saw which cuts by means of an electric arc. Cutting speeds between 20 to 30 cm 2 /S and depths up to 45 cm are possible. There is no mechanical contact between blade and work piece, no binding, and no blade breakage. The arc saw will be applied to the rapid and remote disassembly of multiple ton, contaminated stainless steel vessels

  9. What if the hand piece spring disassembles during robotic radical prostatectomy?

    Science.gov (United States)

    Akbulut, Ziya; Canda, Abdullah Erdem; Atmaca, Ali Fuat; Asil, Erem; Isgoren, Egemen; Balbay, Mevlana Derya

    2011-01-01

    Robot-assisted laparoscopic radical prostatectomy (RALRP) is successfully being performed for treating prostate cancer (PCa). However, instrumentation failure associated with robotic procedures represents a unique new problem. We report the successful completion of RALRP in spite of a disassembled hand piece spring during the procedure. A PubMed/Medline search was made concerning robotic malfunction and robot-assisted laparoscopic radical prostatectomy to discuss our experience. We performed RALRP in a 60-year-old male patient with localized PCa. During the procedure, the spring of the hand piece disassembled, and we were not able to reassemble it. We completed the procedure successfully however without fixing the disassembled hand piece spring. We were able to grasp tissue and needles when we brought our fingers together. The only movement we needed to do was to move fingers apart to release tissue or needles caught by robotic instrument. Although malfunction risk related to the da Vinci Surgical System seems to be very low, it might still occur. Sometimes, simple maneuvers may compensate for the failed function as occurred in our case. However, patients should be informed before the operation about the possibility of converting their procedure to laparoscopic or open due to robotic malfunction.

  10. Phosphorylation of p37 is important for Golgi disassembly at mitosis

    International Nuclear Information System (INIS)

    Kaneko, Yayoi; Tamura, Kaori; Totsukawa, Go; Kondo, Hisao

    2010-01-01

    Research highlights: → p37 is phosphorylated on Serine-56 and Threonine-59 by Cdc2 at mitosis. → Phosphorylated p37 does not bind to Golgi membranes. → p37 phosphorylation inhibits p97/p37-mediated Golgi membrane fusion. -- Abstract: In mammals, the Golgi apparatus is disassembled at early mitosis and reassembled at the end of mitosis. For Golgi disassembly, membrane fusion needs to be blocked. Golgi biogenesis requires two distinct p97ATPase-mediated membrane fusion, the p97/p47 and p97/p37 pathways. We previously reported that p47 phosphorylation on Serine-140 by Cdc2 results in mitotic inhibition of the p97/p47 pathway . In this study, we demonstrate that p37 is phosphorylated on Serine-56 and Threonine-59 by Cdc2 at mitosis, and this phosphorylated p37 does not bind to Golgi membranes. Using an in vitro Golgi reassembly assay, we show that mutated p37(S56D, T59D), which mimics mitotic phosphorylation, does not cause any cisternal regrowth, indicating that p37 phosphorylation inhibits the p97/p37 pathway. Our results demonstrate that p37 phosphorylation on Serine-56 and Threonine-59 is important for Golgi disassembly at mitosis.

  11. Design-only conceptual design report for pit disassembly and conversion facility. Rev 0

    International Nuclear Information System (INIS)

    Zygmunt, S.; Christensen, L.; Richardson, C.

    1997-01-01

    This design-only conceptual design report (DOCDR) was prepared to support a funding request by the Department of Energy (DOE)-Office of Fissile Material Disposition (OFMD) for engineering design of the Pit Disassembly and Conversion Facility (PDCF) Project No. 99-D-141. The PDCF will be used to disassemble the nation's inventory of surplus nuclear weapons pits and convert the plutonium recovered from those pits into a form suitable for storage, international inspection, and final disposition. The PDCF is a complex consisting of a hardened building that will contain the plutonium processes in a safe and secure manner, and conventional buildings and structures that will house support personnel, systems, and equipment. The PDCF uses the Advanced Recovery and Integrated Extraction System (ARIES), a low waste, modular pyroprocessing system to convert pits to plutonium oxide. The PDCF project consists of engineering and design, and construction of the buildings and structures, and engineering and design, procurement, installation, testing and start-up of equipment to disassemble pits and convert plutonium in pits to oxide form. The facility is planned to operate for 10 years, averaging 3.5 metric tons (3.86 tons) of plutonium metal per year. On conclusion of operations, the PDCF will be decontaminated and decommissioned

  12. Design-only conceptual design report for pit disassembly and conversion facility. Rev 0

    Energy Technology Data Exchange (ETDEWEB)

    Zygmunt, S.; Christensen, L.; Richardson, C.

    1997-12-12

    This design-only conceptual design report (DOCDR) was prepared to support a funding request by the Department of Energy (DOE)-Office of Fissile Material Disposition (OFMD) for engineering design of the Pit Disassembly and Conversion Facility (PDCF) Project No. 99-D-141. The PDCF will be used to disassemble the nation`s inventory of surplus nuclear weapons pits and convert the plutonium recovered from those pits into a form suitable for storage, international inspection, and final disposition. The PDCF is a complex consisting of a hardened building that will contain the plutonium processes in a safe and secure manner, and conventional buildings and structures that will house support personnel, systems, and equipment. The PDCF uses the Advanced Recovery and Integrated Extraction System (ARIES), a low waste, modular pyroprocessing system to convert pits to plutonium oxide. The PDCF project consists of engineering and design, and construction of the buildings and structures, and engineering and design, procurement, installation, testing and start-up of equipment to disassemble pits and convert plutonium in pits to oxide form. The facility is planned to operate for 10 years, averaging 3.5 metric tons (3.86 tons) of plutonium metal per year. On conclusion of operations, the PDCF will be decontaminated and decommissioned.

  13. AGR-2 Irradiated Test Train Preliminary Inspection and Disassembly First Look

    Energy Technology Data Exchange (ETDEWEB)

    Ploger, Scott [Idaho National Lab. (INL), Idaho Falls, ID (United States); Demkowciz, Paul [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    The AGR 2 irradiation experiment began in June 2010 and was completed in October 2013. The test train was shipped to the Materials and Fuels Complex in July 2014 for post-irradiation examination (PIE). The first PIE activities included nondestructive examination of the test train, followed by disassembly of the test train and individual capsules and detailed inspection of the capsule contents, including the fuel compacts and their graphite fuel holders. Dimensional metrology was then performed on the compacts, graphite holders, and steel capsule shells. AGR 2 disassembly and metrology were performed with the same equipment used successfully on AGR 1 test train components. Gamma spectrometry of the intact test train gave a preliminary look at the condition of the interior components. No evidence of damage to compacts or graphite components was evident from the isotopic and gross gamma scans. Disassembly of the AGR 2 test train and its capsules was conducted rapidly and efficiently by employing techniques refined during the AGR 1 disassembly campaign. Only one major difficulty was encountered while separating the test train into capsules when thermocouples (of larger diameter than used in AGR 1) and gas lines jammed inside the through tubes of the upper capsules, which required new tooling for extraction. Disassembly of individual capsules was straightforward with only a few minor complications. On the whole, AGR 2 capsule structural components appeared less embrittled than their AGR 1 counterparts. Compacts from AGR 2 Capsules 2, 3, 5, and 6 were in very good condition upon removal. Only relatively minor damage or markings were visible using high resolution photographic inspection. Compact dimensional measurements indicated radial shrinkage between 0.8 to 1.7%, with the greatest shrinkage observed on Capsule 2 compacts that were irradiated at higher temperature. Length shrinkage ranged from 0.1 to 0.9%, with by far the lowest axial shrinkage on Capsule 3 compacts

  14. SAVANNAH RIVER SITE R-REACTOR DISASSEMBLY BASIN IN-SITU DECOMMISSIONING -10499

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C.; Serrato, M.; Blankenship, J.; Griffin, W.

    2010-01-04

    The US DOE concept for facility in-situ decommissioning (ISD) is to physically stabilize and isolate intact, structurally sound facilities that are no longer needed for their original purpose, i.e., generating (reactor facilities), processing(isotope separation facilities) or storing radioactive materials. The 105-R Disassembly Basin is the first SRS reactor facility to undergo the in-situ decommissioning (ISD) process. This ISD process complies with the 105-R Disassembly Basin project strategy as outlined in the Engineering Evaluation/Cost Analysis for the Grouting of the R-Reactor Disassembly Basin at the Savannah River Site and includes: (1) Managing residual water by solidification in-place or evaporation at another facility; (2) Filling the below grade portion of the basin with cementitious materials to physically stabilize the basin and prevent collapse of the final cap - Sludge and debris in the bottom few feet of the basin will be encapsulated between the basin floor and overlying fill material to isolate it from the environment; (3) Demolishing the above grade portion of the structure and relocating the resulting debris to another location or disposing of the debris in-place; and (4) Capping the basin area with a concrete slab which is part of an engineered cap to prevent inadvertent intrusion. The estimated total grout volume to fill the 105-R Reactor Disassembly Basin is 24,384 cubic meters or 31,894 cubic yards. Portland cement-based structural fill materials were designed and tested for the reactor ISD project, and a placement strategy for stabilizing the basin was developed. Based on structural engineering analyses and material flow considerations, maximum lift heights and differential height requirements were determined. Pertinent data and information related to the SRS 105-R Reactor Disassembly Basin in-situ decommissioning include: regulatory documentation, residual water management, area preparation activities, technology needs, fill material

  15. Community

    Science.gov (United States)

    stability Science & Innovation Collaboration Careers Community Environment Science & Innovation Recruitment Events Community Commitment Giving Campaigns, Drives Economic Development Employee Funded neighbor pledge: contribute to quality of life in Northern New Mexico through economic development

  16. Connexin43 hemichannels contributes to the disassembly of cell junctions through modulation of intracellular oxidative status

    Directory of Open Access Journals (Sweden)

    Yuan Chi

    2016-10-01

    Full Text Available Connexin (Cx hemichannels regulate many cellular processes with little information available regarding their mechanisms. Given that many pathological factors that activate hemichannels also disrupts the integrity of cellular junctions, we speculated a potential participation of hemichannels in the regulation of cell junctions. Here we tested this hypothesis. Exposure of renal tubular epithelial cells to Ca2+-free medium led to disassembly of tight and adherens junctions, as indicated by the reduced level of ZO-1 and cadherin, disorganization of F-actin, and severe drop in transepithelial electric resistance. These changes were preceded by an activation of Cx43 hemichannels, as revealed by extracellular efflux of ATP and intracellular influx of Lucifer Yellow. Inhibition of hemichannels with chemical inhibitors or Cx43 siRNA greatly attenuated the disassembly of cell junctions. Further analysis using fetal fibroblasts derived from Cx43 wide-type (Cx43+/+, heterozygous (Cx43+/- and knockout (Cx43-/- littermates showed that Cx43-positive cells (Cx43+/+ exhibited more dramatic changes in cell shape, F-actin, and cadherin in response to Ca2+ depletion, as compared to Cx43-null cells (Cx43-/-. Consistently, these cells had higher level of protein carbonyl modification and phosphorylation, and much stronger activation of P38 and JNK. Hemichannel opening led to extracellular loss of the major antioxidant glutathione (GSH. Supplement of cells with exogenous GSH or inhibition of oxidative sensitive kinases largely prevented the above-mentioned changes. Taken together, our study indicates that Cx43 hemichannels promote the disassembly of cell junctions through regulation of intracellular oxidative status.

  17. The United States pit disassembly and conversion project -- Meeting the MOX fuel specification

    International Nuclear Information System (INIS)

    Nelson, T.O.; James, C.A.; Kolman, D.G.

    1998-01-01

    The US is actively involved in demonstrating the disassembly of nuclear weapons pits to an unclassified form readied for disposition. The MOX option is the most likely path forward for plutonium that originated from nuclear weapon pits. The US demonstration line for pit disassembly and conversion is known as ARIES, the advanced recovery and integrated extraction system. The ARIES demonstration line is being used to gather data in an integrated fashion of the technologies needed for pit disassembly and conversion. These activities include the following modules: pit bisection, hydride-dehydride, oxide conversion, canning, electrolytic decontamination, and nondestructive assay (NDA). Pit bisection swages in a pit in half. Hydride-dehydride converts the pit plutonium metal to an unclassified metal button. To convert the plutonium metal to an oxide the US is investigating a number of options. The primary oxide conversion approach involves variations of combining plutonium hydriding and subsequent oxidation. Another approach is to simply oxidize the metal under controlled conditions-direct metal oxidation (DMO). To remove the gallium from the plutonium oxide, a thermal distillation approach is being used. These pyrochemical approaches will substantially reduce the wastes produced for oxide conversion of weapon plutonium, compared to traditional aqueous processing. The packaging of either the plutonium metal or oxide to long term storage criteria involves the canning and electrolytic decontamination modules. The NDA suite of instruments is then used to assay the material in the containers, which enables international verification without the need to open the containers and repackage them. All of these processes are described

  18. Interactive domains in the molecular chaperone human alphaB crystallin modulate microtubule assembly and disassembly.

    Directory of Open Access Journals (Sweden)

    Joy G Ghosh

    2007-06-01

    Full Text Available Small heat shock proteins regulate microtubule assembly during cell proliferation and in response to stress through interactions that are poorly understood.Novel functions for five interactive sequences in the small heat shock protein and molecular chaperone, human alphaB crystallin, were investigated in the assembly/disassembly of microtubules and aggregation of tubulin using synthetic peptides and mutants of human alphaB crystallin.The interactive sequence (113FISREFHR(120 exposed on the surface of alphaB crystallin decreased microtubule assembly by approximately 45%. In contrast, the interactive sequences, (131LTITSSLSSDGV(142 and (156ERTIPITRE(164, corresponding to the beta8 strand and the C-terminal extension respectively, which are involved in complex formation, increased microtubule assembly by approximately 34-45%. The alphaB crystallin peptides, (113FISREFHR(120 and (156ERTIPITRE(164, inhibited microtubule disassembly by approximately 26-36%, and the peptides (113FISREFHR(120 and (131LTITSSLSSDGV(142 decreased the thermal aggregation of tubulin by approximately 42-44%. The (131LTITSSLSSDGV(142 and (156ERTIPITRE(164 peptides were more effective than the widely used anti-cancer drug, Paclitaxel, in modulating tubulinmicrotubule dynamics. Mutagenesis of these interactive sequences in wt human alphaB crystallin confirmed the effects of the alphaB crystallin peptides on microtubule assembly/disassembly and tubulin aggregation. The regulation of microtubule assembly by alphaB crystallin varied over a narrow range of concentrations. The assembly of microtubules was maximal at alphaB crystallin to tubulin molar ratios between 1:4 and 2:1, while molar ratios >2:1 inhibited microtubule assembly.Interactive sequences on the surface of human alphaB crystallin collectively modulate microtubule assembly through a dynamic subunit exchange mechanism that depends on the concentration and ratio of alphaB crystallin to tubulin. These are the first

  19. [PHAHs levels in soil samples from the E-waste disassembly sites and their sources allocation].

    Science.gov (United States)

    Zhao, Gao-Feng; Wang, Zi-Jian

    2009-06-15

    Soil samples (each with 3 replicates of - 1 kg, at the top 0-5 cm layer) were collected from each of the e-waste disassembly sites and the control site. Also obtained from each disassembly site were samples (each weighing - 0.2 kg) of cable coating,stuffing powder, and circuit boards chipping. The contents of 23 PBB congeners, 12 PBDE congeners, and 27 PCB congeners in soil and in their potential sources, including e-waste residues, were measured using the GC-MS5975B technique. The highest level of PBBs was found in the cable coating among the three e-waste residues, with a concentration of 35.25 ng x g(-1). The contents of low-brominated PBBs (including monobromobiphenyls and dibromobiphenyls) accounted for 38% of the total PBBs concentration observed in cable coating sample. The highest levels of PBDEs and PBDE209 were found in the stuffing powder for electronic component among the collected e-waste residues, with a concentration of 29.71 and 4.19 x 10(3) ng x g(-1). PBDE153 and PBDE183 were the most predominant PBDE congeners, with their concentration accounting for 43% and 24% of the total PBDEs concentration observed in the stuffing powder sample, respectively. Levels of PCBs in cable coating were the highest in these e-waste residues, with a concentration of 680.02 ngx g(-1). The observed values of the three PHAHs in soils from the disassembly site were considerably higher than their corresponding values observed in the control site (p < 0.05), which indicates that these PHAHs from e-waste is the pollution source of local environment.

  20. Development of disassembly and pin chopping technology for FBR spent fuels

    International Nuclear Information System (INIS)

    Kobayashi, Tsuguyuki; Namba, Takashi; Kawabe, Yukinari; Washiya, Tadahiro

    2008-01-01

    Japan Atomic Power Company (JAPC) and Japan Atomic Energy Agency (JAEA) have been developing fuel disassembly and fuel pin chopping systems for a future Japanese commercial FBR. At first, the wrapper tube is cut by the slit-cut to pull it out, then the fuel pins are cut by the crop-cut at their end-plugs to separate them from the entrance nozzle. The pins are transferred to the magazine of the chopping machine. A series of tests were performed to develop this procedure. As the result of mechanical cutting tests, the CBN wheel was selected. The slit-cut tests were carried out to evaluated the cutting performance of the wheel. The wrapper tube is normally slit-cut in the circumferential direction. One CBN wheel could cut more than 5 fuel assemblies in this direction. The slit-cut in the axial direction is prepared as provision when the tube is difficult to put out. More work is needed to cut 5mm thick PNC-FMS plate in this direction without damaging the pins beneath it. As the result of the crop-cut tests of end-plugs made of ODS steel, the CBN wheel could cut the 61 pin bundle by two strokes. More work is needed to cut the 217 pin bundle. Fuel pin handling tests were performed to transfer them from the disassembly machine to the chopping machine. The Saucer tray was selected to receive the disassembled pins. All the pins were transferred and loaded into a magazine of the chopping machine. Fuel pin loading tests were conducted to optimize the magazine configuration to make the chopping length within 1.0±0.5 cm. In order to decrease the disturbance during chopping, the width of the magazine was adjusted to be 12 cm and installation of a height adjuster is favourable to control the free space above the pins. (author)

  1. KADIS: a program to analyse the disassembly phase of hypothetical accidents in LMFBRs

    International Nuclear Information System (INIS)

    Schmuck, P.; Jacobs, G.; Arnecke, G.

    1977-11-01

    The program KADIS models the disassembly phase during power excursions in LMFBR hypothetical accidents. KADIS is based on point kinetics in the neutronics part and on a 2-dimensional representation of the reactor core in the hydrodynamics part. The core is modeled as an ideal, compressible fluid which is heated up adiabatically during the excursion. KADIS was built up with the help of the VENUS program of Argonne National Laboratory. Several important features were added to the basic VENUS model. Therefore we give first a complete description of the mathematical models used. Secondly we provide the user with the necessary information to handle the input/output of KADIS. (orig.) [de

  2. Engineering scale tests of mechanical disassembly and short stroke shearing systems for FBR fuel assembly

    International Nuclear Information System (INIS)

    Higuchi, Hidetoshi; Kitagaki, Toru; Koizumi, Kenji; Hirano, Hiroyasu; Takeuchi, Masayuki; Washiya, Tadahiro; Kawabe, Yukinari; Kobayashi, Tsuguyuki

    2011-01-01

    Japan Atomic Energy Agency (JAEA) and The Japan Atomic Power Company (JAPC) have been developing an advanced head-end process based on mechanical disassembly and short stroke shearing systems as a part of Fast Reactor Cycle Technology Development (FaCT). Fuel pins for a fast reactor are installed within a hexagonal shaped wrapper tube made of stainless steel. In order to reprocess the fast reactor fuel pins, they must be removed from the wrapper tube and transported to the shearing system without failure. In addition, the advanced aqueous reprocessing process, called 'NEXT' (New Extraction System for TRU Recovery) process requires a solution of the spent fuel with relatively high concentration (500g/L). JAEA and JAPC have developed the mechanical disassembly and the short stroke shearing technology which is expected to make fragmented fuel to satisfy these requirements. This paper reports the results of engineering scale tests on the mechanical disassembly and short stroke shearing systems. These tests were carried out with simulated FBR fuel assembly and removed pins. The mechanical cutting method has been developed to avoid fuel pin failure during disassembly operation. The cutting process is divided into two modes, so called 'slit-cut' for cutting the wrapper tube and 'crop-cut' for the end plug region of the fuel pin bundle. In the slit-cut mode, the depth of cutting was automatically controlled based on the calculated wastage of the cutting tool and deformation of the wrapper tube which had been measured before the cutting. This procedure was confirmed to minimize the fuel pin failure which was hard to prevent in the case of laser cutting. The cutting speed was also controlled automatically by the electric current of the cutting motor to lower the load of the cutting tool. The removed fuel pins were transported to the shearing machine, whose fuel shearing magazine width was set to be narrow to realize the suitable configuration for the short stroke shearing

  3. Nuclear disassembly of the (Pb+Au) system at Elab=29 MeV per nucleon

    International Nuclear Information System (INIS)

    Piasecki, E.; Kordyasz, A.; Bresson, S.; Crema, E.; Galin, J.; Guerreau, D.; Morjean, M.; Paulot, C.; Pouthas, J.; Jastrzebski, J.; Pienkowski, L.; Skulski, W.; Lott, B.; Quednau, B.; Schroder, W.U.; Toeke, J.

    1990-01-01

    Nuclei, with Z up to 82, emitted in the 208 Pb+ 197 Au reaction at E lab =29 MeV per nucleon, have been measured as a function of the associated neutron multiplicity. The data reveal the presence of strong correlations between character of a collision and neutron multiplicity. The trends suggest a disassembly of the nuclear system into a large number of nucleons and small fragments in the events with the highest neutron multiplicity. In such events, approximately one third of the neutrons are released from the system and fragments yields decrease in an exponential fashion with increasing mass

  4. Prey and mound disassembly, manipulation and transport by fire ant collectives

    Science.gov (United States)

    Dutta, Bahnisikha; Monaenkova, Daria; Goodisman, Michael A.; Goldman, Daniel

    Fire ants inhabit subterranean nests covered by a hemispherical mound of soil permeated by narrow ( 1 body length diameter) tunnels. Fire ants can use their mound for long-term food storage [Gayahan &Tschinkel, J. Insect Sci.,2008]. Since mound tunnels are narrow, we expect that in addition to prey manipulation, mound reconfiguration could also be an important aspect of the food storage strategy. Ant colonies collected from wild were allowed to build nests in containers filled with clay soil in the laboratory. These colonies were offered diverse prey embedded with lead markers, including mealworms, crickets and shrimp. Ant-prey-soil interactions on the nest surface were recorded using overhead video and subsurface using x-ray imaging. Individual ants involved in prey storage exhibited three distinct behaviors: prey maneuvering, prey dissection and mound reconfiguration. Small prey (e.g. mealworms) were collectively carried intact into the mound through a tunnel, and then disassembled within the mound. Larger prey (e.g. shrimp) were dismantled into small pieces above the surface and carried to mound tunnels. The bodies of hard medium-sized prey (e.g. crickets) were buried after limb removal and then disassembled and moved into tunnels. Soil reconfiguration occurred in all cases.

  5. Cofilin phosphorylation is elevated after F-actin disassembly induced by Rac1 depletion.

    Science.gov (United States)

    Liu, Linna; Li, Jing; Zhang, Liwang; Zhang, Feng; Zhang, Rong; Chen, Xiang; Brakebusch, Cord; Wang, Zhipeng; Liu, Xinyou

    2015-01-01

    Cytoskeletal reorganization is essential to keratinocyte function. Rac1 regulates cytoskeletal reorganization through signaling pathways such as the cofilin cascade. Cofilin severs actin filaments after activation by dephosphorylation. Rac1 was knocked out in mouse keratinocytes and it was found that actin filaments disassembled. In the epidermis of mice in which Rac1 was knocked out only in keratinocytes, cofilin phosphorylation was aberrantly elevated, corresponding to repression of the phosphatase slingshot1 (SSH1). These effects were independent of the signaling pathways for p21-activated kinase/LIM kinase (Pak/LIMK), protein kinase C, or protein kinase D or generation of reactive oxygen species. Similarly, when actin polymerization was specifically inhibited or Rac1 was knocked down, cofilin phosphorylation was enhanced and SSH1 was repressed. Repression of SSH1 partially blocked actin depolymerization induced by Rac1 depletion. Therefore, aberrant cofilin phosphorylation that induces actin polymerization might be a consequence of actin disassembly induced by the absence of Rac1. © 2015 International Union of Biochemistry and Molecular Biology.

  6. Asymmetric ring structure of Vps4 required for ESCRT-III disassembly

    Science.gov (United States)

    Caillat, Christophe; Macheboeuf, Pauline; Wu, Yuanfei; McCarthy, Andrew A.; Boeri-Erba, Elisabetta; Effantin, Gregory; Göttlinger, Heinrich G.; Weissenhorn, Winfried; Renesto, Patricia

    2015-12-01

    The vacuolar protein sorting 4 AAA-ATPase (Vps4) recycles endosomal sorting complexes required for transport (ESCRT-III) polymers from cellular membranes. Here we present a 3.6-Å X-ray structure of ring-shaped Vps4 from Metallosphera sedula (MsVps4), seen as an asymmetric pseudohexamer. Conserved key interface residues are shown to be important for MsVps4 assembly, ATPase activity in vitro, ESCRT-III disassembly in vitro and HIV-1 budding. ADP binding leads to conformational changes within the protomer, which might propagate within the ring structure. All ATP-binding sites are accessible and the pseudohexamer binds six ATP with micromolar affinity in vitro. In contrast, ADP occupies one high-affinity and five low-affinity binding sites in vitro, consistent with conformational asymmetry induced on ATP hydrolysis. The structure represents a snapshot of an assembled Vps4 conformation and provides insight into the molecular motions the ring structure undergoes in a concerted action to couple ATP hydrolysis to ESCRT-III substrate disassembly.

  7. Plastics disassembly versus bulk recycling: engineering design for end-of-life electronics resource recovery.

    Science.gov (United States)

    Rios, Pedro; Stuart, Julie Ann; Grant, Ed

    2003-12-01

    Annual plastic flows through the business and consumer electronics manufacturing supply chain include nearly 3 billion lb of high-value engineering plastics derived from petroleum. The recovery of resource value from this stream presents critical challenges in areas of materials identification and recycling process design that demand new green engineering technologies applied together with life cycle assessment and ecological supply chain analysis to create viable plastics-to-plastics supply cycles. The sustainable recovery of potentially high-value engineering plastics streams requires that recyclers either avoid mixing plastic parts or purify later by separating smaller plastic pieces created in volume reduction (shredding) steps. Identification and separation constitute significant barriers in the plastics-to-plastics recycling value proposition. In the present work, we develop a model that accepts randomly arriving electronic products to study scenarios by which a recycler might identify and separate high-value engineering plastics as well as metals. Using discrete eventsimulation,we compare current mixed plastics recovery with spectrochemical plastic resin identification and subsequent sorting. Our results show that limited disassembly with whole-part identification can produce substantial yields in separated streams of recovered engineering thermoplastics. We find that disassembly with identification does not constitute a bottleneck, but rather, with relatively few workers, can be configured to pull the process and thus decrease maximum staging space requirements.

  8. Stimuli-disassembling gold nanoclusters for diagnosis of early stage oral cancer by optical coherence tomography

    Science.gov (United States)

    Kim, Chang Soo; Ingato, Dominique; Wilder-Smith, Petra; Chen, Zhongping; Kwon, Young Jik

    2018-01-01

    A key design consideration in developing contrast agents is obtaining distinct, multiple signal changes in diseased tissue. Plasmonic gold nanoparticles (Au NPs) have been developed as contrast agents due to their strong surface plasmon resonance (SPR). This study aims to demonstrate that stimuli-responsive plasmonic Au nanoclusters (Au NCs) can be used as a contrast agent for optical coherence tomography (OCT) in detecting early-stage cancer. Au NPs were clustered via acid-cleavable linkers to synthesize Au NCs that disassemble under mildly acidic conditions into individual Au NPs, simultaneously diminishing SPR effect (quantified by scattering intensity) and increasing Brownian motion (quantified by Doppler variance). The acid-triggered morphological and accompanying optico-physical property changes of the acid-disassembling Au NCs were confirmed by TEM, DLS, UV/Vis, and OCT. Stimuli-responsive Au NCs were applied in a hamster check pouch model carrying early-stage squamous carcinoma tissue. The tissue was visualized by OCT imaging, which showed reduced scattering intensity and increased Doppler variance in the dysplastic tissue. This study demonstrates the promise of diagnosing early-stage cancer using molecularly programmable, inorganic nanomaterial-based contrast agents that are capable of generating multiple, stimuli-triggered diagnostic signals in early-stage cancer.[Figure not available: see fulltext.

  9. Assessment of the impacts of spent fuel disassembly alternatives on the Nuclear Waste Isolation System

    International Nuclear Information System (INIS)

    1984-07-01

    The objective of this report was to evaluate four possible alternative methods of preparing and packaging spent fuel assemblies for geologic disposal against the Reference Process of unmodified spent fuel. The four alternative processes were: (1) End fitting removal, (2) Fission gas venting and resealing, (3) Fuel bundle disassembly and close packing of fuel pins, and (4) Fuel shearing and immobilization. Systems analysis was used to develop a basis of comparison of the alternatives. Conceptual processes and facility layouts were devised for each of the alternatives, based on technology deemed feasible for the purpose. Assessments were made of 15 principal attributes from the technical, operational, safety/risk, and economic considerations related to each of the alternatives, including both the surface packaging and underground repository operations. Specific attributes of the alternative processes were evaluated by assigning a number for each that expressed its merit relative to the corresponding attribute of the Reference Process. Each alternative process was then ranked by summing the numbers for attributes in each of the four assessment areas and collectively. Fuel bundle disassembly and close packing of fuel pins was ranked the preferred method of disposal of spent fuel. 63 references, 46 figures, 46 tables

  10. Engineering multifunctional protein nanoparticles by in vitro disassembling and reassembling of heterologous building blocks

    Science.gov (United States)

    Unzueta, Ugutz; Serna, Naroa; Sánchez-García, Laura; Roldán, Mónica; Sánchez-Chardi, Alejandro; Mangues, Ramón; Villaverde, Antonio; Vázquez, Esther

    2017-12-01

    The engineering of protein self-assembling at the nanoscale allows the generation of functional and biocompatible materials, which can be produced by easy biological fabrication. The combination of cationic and histidine-rich stretches in fusion proteins promotes oligomerization as stable protein-only regular nanoparticles that are composed by a moderate number of building blocks. Among other applications, these materials are highly appealing as tools in targeted drug delivery once empowered with peptidic ligands of cell surface receptors. In this context, we have dissected here this simple technological platform regarding the controlled disassembling and reassembling of the composing building blocks. By applying high salt and imidazole in combination, nanoparticles are disassembled in a process that is fully reversible upon removal of the disrupting agents. By taking this approach, we accomplish here the in vitro generation of hybrid nanoparticles formed by heterologous building blocks. This fact demonstrates the capability to generate multifunctional and/or multiparatopic or multispecific materials usable in nanomedical applications.

  11. Community.

    Science.gov (United States)

    Grauer, Kit, Ed.

    1995-01-01

    Art in context of community is the theme of this newsletter. The theme is introduced in an editorial "Community-Enlarging the Definition" (Kit Grauer). Related articles include: (1) "The Children's Bridge is not Destroyed: Heart in the Middle of the World" (Emil Robert Tanay); (2) "Making Bridges: The Sock Doll…

  12. Polygons and adhesion plaques and the disassembly and assembly of myofibrils in cardiac myocytes.

    Science.gov (United States)

    Lin, Z X; Holtzer, S; Schultheiss, T; Murray, J; Masaki, T; Fischman, D A; Holtzer, H

    1989-06-01

    Successive stages in the disassembly of myofibrils and the subsequent assembly of new myofibrils have been studied in cultures of dissociated chick cardiac myocytes. The myofibrils in trypsinized and dispersed myocytes are sequentially disassembled during the first 3 d of culture. They split longitudinally and then assemble into transitory polygons. Multiples of single sarcomeres, the cardiac polygons, are analogous to the transitory polygonal configurations assumed by stress fibers in spreading fibroblasts. They differ from their counterparts in fibroblasts in that they consist of muscle alpha-actinin vertices and muscle myosin heavy chain struts, rather than of the nonmuscle contractile protein isoforms of stress fiber polygons. EM sections reveal the vertices and struts in cardiac polygons to be typical Z and A bands. Most cardiac polygons are eliminated by day 5 of culture. Concurrent with the disassembly and elimination of the original myofibrils new myofibrils are rapidly assembled elsewhere in the same myocyte. Without exception both distal tips of each nascent myofibril terminate in adhesion plaques. The morphology and composition of the adhesion plaques capping each end of each myofibril are similar to those of the termini of stress fibers in fibroblasts. However, whereas the adhesion complexes involving stress fibers in fibroblasts consist of vinculin/nonmuscle alpha-actinin/beta- and gamma-actins, the analogous structures in myocytes involving myofibrils consist of vinculin/muscle alpha-actinin/alpha-actin. The addition of 1.7-2.0 microns sarcomeres to the distal tips of an elongating myofibril, irrespective of whether the myofibril consists of 1, 10, or several hundred tandem sarcomeres, occurs while the myofibril appears to remain linked to its respective adhesion plaques. The adhesion plaques in vitro are the equivalent of the in vivo intercalated discs, both in terms of their molecular composition and with respect to their functioning as initiating

  13. pH-Sensitive Reversible Programmed Targeting Strategy by the Self-Assembly/Disassembly of Gold Nanoparticles.

    Science.gov (United States)

    Ma, Jinlong; Hu, Zhenpeng; Wang, Wei; Wang, Xinyu; Wu, Qiang; Yuan, Zhi

    2017-05-24

    A reversible programmed targeting strategy could achieve high tumor accumulation due to its long blood circulation time and high cellular internalization. Here, targeting ligand-modified poly(ethylene glycol) (PEG-ligand), dibutylamines (Bu), and pyrrolidinamines (Py) were introduced on the surface of gold nanoparticles (Au NPs) for reversible shielding/deshielding of the targeting ligands by pH-responsive self-assembly. Hydrophobic interaction and steric repulsion are the main driving forces for the self-assembly/disassembly of Au NPs. The precise self-assembly (pH ≥ 7.2) and disassembly (pH ≤ 6.8) of Au NPs with different ligands could be achieved by fine-tuning the modifying molar ratio of Bu and Py (R m ), which followed the formula R m = 1/(-0.0013X 2 + 0.0323X + 1), in which X is the logarithm of the partition coefficient of the targeting ligand. The assembled/disassembled behavior of Au NPs at pH 7.2 and 6.8 was confirmed by transmission electron microscopy and dynamic light scattering. Enzyme-linked immunosorbent assays and cellular uptake studies showed that the ligands could be buried inside the assembly and exposed when disassembled. More importantly, this process was reversible, which provides the possibility of prolonging blood circulation by shielding ligands associated with the NPs that were effused from tumor tissue.

  14. Ufd1-Npl4 Recruit Cdc48 for Disassembly of Ubiquitylated CMG Helicase at the End of Chromosome Replication

    Directory of Open Access Journals (Sweden)

    Marija Maric

    2017-03-01

    Full Text Available Disassembly of the Cdc45-MCM-GINS (CMG DNA helicase is the key regulated step during DNA replication termination in eukaryotes, involving ubiquitylation of the Mcm7 helicase subunit, leading to a disassembly process that requires the Cdc48 “segregase”. Here, we employ a screen to identify partners of budding yeast Cdc48 that are important for disassembly of ubiquitylated CMG helicase at the end of chromosome replication. We demonstrate that the ubiquitin-binding Ufd1-Npl4 complex recruits Cdc48 to ubiquitylated CMG. Ubiquitylation of CMG in yeast cell extracts is dependent upon lysine 29 of Mcm7, which is the only detectable site of ubiquitylation both in vitro and in vivo (though in vivo other sites can be modified when K29 is mutated. Mutation of K29 abrogates in vitro recruitment of Ufd1-Npl4-Cdc48 to the CMG helicase, supporting a model whereby Ufd1-Npl4 recruits Cdc48 to ubiquitylated CMG at the end of chromosome replication, thereby driving the disassembly reaction.

  15. Neuroprotective Effects against POCD by Photobiomodulation: Evidence from Assembly/Disassembly of the Cytoskeleton

    Directory of Open Access Journals (Sweden)

    Ann D. Liebert

    2016-01-01

    Full Text Available Postoperative cognitive dysfunction (POCD is a decline in memory following anaesthesia and surgery in elderly patients. While often reversible, it consumes medical resources, compromises patient well-being, and possibly accelerates progression into Alzheimer's disease. Anesthetics have been implicated in POCD, as has neuroinflammation, as indicated by cytokine inflammatory markers. Photobiomodulation (PBM is an effective treatment for a number of conditions, including inflammation. PBM also has a direct effect on microtubule disassembly in neurons with the formation of small, reversible varicosities, which cause neural blockade and alleviation of pain symptoms. This mimics endogenously formed varicosities that are neuroprotective against damage, toxins, and the formation of larger, destructive varicosities and focal swellings. It is proposed that PBM may be effective as a preconditioning treatment against POCD; similar to the PBM treatment, protective and abscopal effects that have been demonstrated in experimental models of macular degeneration, neurological, and cardiac conditions.

  16. Chain Assembly and Disassembly Processes Differently Affect the Conformational Space of Ubiquitin Chains.

    Science.gov (United States)

    Kniss, Andreas; Schuetz, Denise; Kazemi, Sina; Pluska, Lukas; Spindler, Philipp E; Rogov, Vladimir V; Husnjak, Koraljka; Dikic, Ivan; Güntert, Peter; Sommer, Thomas; Prisner, Thomas F; Dötsch, Volker

    2018-02-06

    Ubiquitination is the most versatile posttranslational modification. The information is encoded by linkage type as well as chain length, which are translated by ubiquitin binding domains into specific signaling events. Chain topology determines the conformational space of a ubiquitin chain and adds an additional regulatory layer to this ubiquitin code. In particular, processes that modify chain length will be affected by chain conformations as they require access to the elongation or cleavage sites. We investigated conformational distributions in the context of chain elongation and disassembly using pulsed electron-electron double resonance spectroscopy in combination with molecular modeling. Analysis of the conformational space of diubiquitin revealed conformational selection or remodeling as mechanisms for chain recognition during elongation or hydrolysis, respectively. Chain elongation to tetraubiquitin increases the sampled conformational space, suggesting that a high intrinsic flexibility of K48-linked chains may contribute to efficient proteasomal degradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Disassembly Control of Saccharide-Based Amphiphiles Driven by Electrostatic Repulsion.

    Science.gov (United States)

    Yamada, Taihei; Kokado, Kenta; Sada, Kazuki

    2017-03-14

    According to the design of disassembly using electrostatic repulsion, novel amphiphiles consisting of a lipophilic ion part and a hydrophilic saccharide part were synthesized via the facile copper-catalyzed click reaction, and their molecular assemblies in water and chloroform were studied. The amphiphiles exhibited a molecular orientation opposite to that of the conventional amphiphiles in each case. ζ Potential measurements indicated that the lipophilic ion part is exposed outside in chloroform. The size of a solvophobic part in the amphiphiles dominates the size of an assembling structure; that is, in water, these amphiphiles tethering different lengths of the saccharide part exhibited almost identical assembling size, whereas in chloroform, the size depends on the length of the saccharide part in the amphiphiles.

  18. TRIM15 is a focal adhesion protein that regulates focal adhesion disassembly

    Science.gov (United States)

    Uchil, Pradeep D.; Pawliczek, Tobias; Reynolds, Tracy D.; Ding, Siyuan; Hinz, Angelika; Munro, James B.; Huang, Fang; Floyd, Robert W.; Yang, Haitao; Hamilton, William L.; Bewersdorf, Joerg; Xiong, Yong; Calderwood, David A.; Mothes, Walther

    2014-01-01

    ABSTRACT Focal adhesions are macromolecular complexes that connect the actin cytoskeleton to the extracellular matrix. Dynamic turnover of focal adhesions is crucial for cell migration. Paxillin is a multi-adaptor protein that plays an important role in regulating focal adhesion dynamics. Here, we identify TRIM15, a member of the tripartite motif protein family, as a paxillin-interacting factor and a component of focal adhesions. TRIM15 localizes to focal contacts in a myosin-II-independent manner by an interaction between its coiled-coil domain and the LD2 motif of paxillin. Unlike other focal adhesion proteins, TRIM15 is a stable focal adhesion component with restricted mobility due to its ability to form oligomers. TRIM15-depleted cells display impaired cell migration and reduced focal adhesion disassembly rates, in addition to enlarged focal adhesions. Thus, our studies demonstrate a cellular function for TRIM15 as a regulatory component of focal adhesion turnover and cell migration. PMID:25015296

  19. Electrostatic assembly/disassembly of nanoscaled colloidosomes for light-triggered cargo release

    KAUST Repository

    Li, Song

    2015-04-27

    Colloidosome capsules possess the potential for the encapsulation and release of molecular and macromolecular cargos. However, the stabilization of the colloidosome shell usually requires an additional covalent crosslinking which irreversibly seals the capsules, and greatly limits their applications in large-cargos release. Herein we report nanoscaled colloidosomes designed by the electrostatic assembly of organosilica nanoparticles (NPs) with oppositely charged surfaces (rather than covalent bonds), arising from different contents of a bridged nitrophenylene-alkoxysilane [NB; 3-nitro-N-(3-(triethoxysilyl)propyl)-4-(((3-(triethoxysilyl)propyl)-amino)methyl)benzamid] derivative in the silica. The surface charge of the positively charged NPs was reversed by light irradiation because of a photoreaction in the NB moieties, which impacted the electrostatic interactions between NPs and disassembled the colloidosome nanosystems. This design was successfully applied for the encapsulation and light-triggered release of cargos. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Acoustically Triggered Disassembly of Multilayered Polyelectrolyte Thin Films through Gigahertz Resonators for Controlled Drug Release Applications

    Directory of Open Access Journals (Sweden)

    Zhixin Zhang

    2016-11-01

    Full Text Available Controlled drug release has a high priority for the development of modern medicine and biochemistry. To develop a versatile method for controlled release, a miniaturized acoustic gigahertz (GHz resonator is designed and fabricated which can transfer electric supply to mechanical vibrations. By contacting with liquid, the GHz resonator directly excites streaming flows and induces physical shear stress to tear the multilayered polyelectrolyte (PET thin films. Due to the ultra-high working frequency, the shear stress is greatly intensified, which results in a controlled disassembling of the PET thin films. This technique is demonstrated as an effective method to trigger and control the drug release. Both theory analysis and controlled release experiments prove the thin film destruction and the drug release.

  1. Cofilin phosphorylation is elevated after F-actin disassembly induced by Rac1 depletion

    DEFF Research Database (Denmark)

    Liu, Linna; Li, Jing; Zhang, Liwang

    2015-01-01

    Cytoskeletal reorganization is essential to keratinocyte function. Rac1 regulates cytoskeletal reorganization through signaling pathways such as the cofilin cascade. Cofilin severs actin filaments after activation by dephosphorylation. Rac1 was knocked out in mouse keratinocytes and it was found...... that actin filaments disassembled. In the epidermis of mice in which Rac1 was knocked out only in keratinocytes, cofilin phosphorylation was aberrantly elevated, corresponding to repression of the phosphatase slingshot1 (SSH1). These effects were independent of the signaling pathways for p21-activated kinase....../LIM kinase (Pak/LIMK), protein kinase C, or protein kinase D or generation of reactive oxygen species. Similarly, when actin polymerization was specifically inhibited or Rac1 was knocked down, cofilin phosphorylation was enhanced and SSH1 was repressed. Repression of SSH1 partially blocked actin...

  2. AGR-3/4 Irradiation Test Train Disassembly and Component Metrology First Look Report

    Energy Technology Data Exchange (ETDEWEB)

    Stempien, John Dennis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Francine Joyce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Winston, Philip Lon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    The AGR-3/4 experiment was designed to study fission product transport within graphitic matrix material and nuclear-grade graphite. To this end, this experiment consisted of 12 capsules, each fueled with 4 compacts containing UCO TRISO particles as driver fuel and 20 UCO designed-to-fail (DTF) fuel particles in each compact. The DTF fuel was fabricated with a thin pyrocarbon layer which was intended to fail during irradiation and provide a source of fission products. These fission products could then migrate through the compact and into the surrounding concentric rings of graphitic matrix material and/or nuclear graphite. Through post-irradiation examination (PIE) of the rings (including physical sampling and gamma scanning) fission product concentration profiles within the rings can be determined. These data can be used to elucidate fission product transport parameters (e.g. diffusion coefficients within the test materials) which will be used to inform and refine models of fission product transport. After irradiation in the Advanced Test Reactor (ATR) had been completed in April 2014, the AGR-3/4 experiment was shipped to the Hot Fuel Examination Facility (HFEF) at the Materials and Fuels Complex (MFC) for inspection, disassembly, and metrology. The AGR-3/4 test train was received at MFC in two separate shipments between February and April 2015. Visual examinations of the test train exterior did not indicate dimensional distortion, and only two small discolored areas were observed at the bottom of Capsules 8 and 9. No corresponding discoloration was found on the inside of these capsules, however. Prior to disassembly, the two test train sections were subject to analysis via the Precision Gamma Scanner (PGS), which did not indicate that any gross fuel relocation had occurred. A series of specialized tools (including clamps, cutters, and drills) had been designed and fabricated in order to carry out test train disassembly and recovery of capsule components (graphite

  3. AGR-3/4 Irradiation Test Train Disassembly and Component Metrology First Look Report

    Energy Technology Data Exchange (ETDEWEB)

    Stempien, John Dennis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Francine Joyce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Winston, Philip Lon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    The AGR-3/4 experiment was designed to study fission product transport within graphitic matrix material and nuclear-grade graphite. To this end, this experiment consisted of 12 capsules, each fueled with 4 compacts containing UCO TRISO particles as driver fuel and 20 UCO designed-to-fail (DTF) fuel particles in each compact. The DTF fuel was fabricated with a thin pyrocarbon layer which was intended to fail during irradiation and provide a source of fission products. These fission products could then migrate through the compact and into the surrounding concentric rings of graphitic matrix material and/or nuclear graphite. Through post-irradiation examination (PIE) of the rings (including physical sampling and gamma scanning) fission product concentration profiles within the rings can be determined. These data can be used to elucidate fission product transport parameters (e.g. diffusion coefficients within the test materials) which will be used to inform and refine models of fission product transport. After irradiation in the Advanced Test Reactor (ATR) had been completed in April 2014, the AGR-3/4 experiment was shipped to the Hot Fuel Examination Facility (HFEF) at the Materials and Fuels Complex (MFC) for inspection, disassembly, and metrology. The AGR-3/4 test train was received at MFC in two separate shipments between February and April 2015. Visual examinations of the test train exterior did not indicate dimensional distortion, and only two small discolored areas were observed at the bottom of Capsules 8 and 9. No corresponding discoloration was found on the inside of these capsules, however. Prior to disassembly, the two test train sections were subject to analysis via the Precision Gamma Scanner (PGS), which did not indicate that any gross fuel relocation had occurred. A series of specialized tools (including clamps, cutters, and drills) had been designed and fabricated in order to carry out test train disassembly and recovery of capsule components (graphite

  4. VENUS-2, Reactor Kinetics with Feedback, 2-D LMFBR Disassembly Excursions

    International Nuclear Information System (INIS)

    Jackson, J.F.; Nicholson, R.B.; Weber, D.P.

    1980-01-01

    1 - Description of problem or function: VENUS-2 is an improved edition of the VENUS fast-reactor disassembly program. It is a two- dimensional (r-z) coupled neutronics-hydrodynamics code that calculates the dynamic behavior of an LMFBR during a prompt-critical disassembly excursion. It calculates the power history and fission energy release as well as the space-time histories of the fuel temperatures, core material pressures, and core material motions. Reactivity feedback effects due to Doppler broadening and reactor material motion are taken into account. 2 - Method of solution: The power and energy release are calculated using a point-kinetics formulation with up to six delayed neutron groups. The reactivity is a combination of an input driving function and feedback effects due to Doppler broadening and material motion. An adiabatic model is used to calculate the temperature increase throughout the reactor based on an initial temperature distribution and power profile provided as input data. These temperatures are, in turn, converted to fuel pressures through one of several equation of state options provided. The material motion that results from the pressure buildup is calculated by a direct finite difference solution of a set of two-dimensional (r-z) hydrodynamics equations. This is done in Lagrangian coordinates. The reactivity change associated with this motion is calculated by first-order perturbation theory. The displacements are also used to adjust the fuel densities as required for the density dependent equation-of- state option. An automatic time-step-size selection scheme is provided. 3 - Restrictions on the complexity of the problem: VENUS-2 is written so that the dimensions of the storage arrays can be readily changed to accommodate a broad range of problem sizes. In the base version, the total number of mesh intervals is restricted such that (NR+3)*(NZ+3) is less than 700, where NR and NZ are the total number of mesh intervals in the r and z

  5. Assembly/disassembly of a complex icosahedral virus to incorporate heterologous nucleic acids

    Science.gov (United States)

    Pascual, Elena; Mata, Carlos P.; Carrascosa, José L.; Castón, José R.

    2017-12-01

    Hollow protein containers are widespread in nature, and include virus capsids as well as eukaryotic and bacterial complexes. Protein cages are studied extensively for applications in nanotechnology, nanomedicine and materials science. Their inner and outer surfaces can be modified chemically or genetically, and the internal cavity can be used to template, store and/or arrange molecular cargos. Virus capsids and virus-like particles (VLP, noninfectious particles) provide versatile platforms for nanoscale bioengineering. Study of capsid protein self-assembly into monodispersed particles, and of VLP structure and biophysics is necessary not only to understand natural processes, but also to infer how these platforms can be redesigned to furnish novel functional VLP. Here we address the assembly dynamics of infectious bursal disease virus (IBDV), a complex icosahedral virus. IBDV has a ~70 nm-diameter T  =  13 capsid with VP2 trimers as the only structural subunits. During capsid assembly, VP2 is synthesized as a precursor (pVP2) whose C terminus is cleaved. The pVP2 C terminus has an amphipathic helix that controls VP2 polymorphism. In the absence of the VP3 scaffolding protein, necessary for control of assembly, 466/456-residue pVP2 intermediates bearing this helix assemble into VLP only when expressed with an N-terminal His6 tag (the HT-VP2-466 protein). HT-VP2-466 capsids are optimal for genetic insertion of proteins (cargo space ~78 000 nm3). We established an in vitro assembly/disassembly system of HT-VP2-466-based VLP for heterologous nucleic acid packaging and/or encapsulation of drugs and other molecules. HT-VP2-466 (empty) capsids were disassembled and reassembled by dialysis against low-salt/basic pH and high-salt/acid pH buffers, respectively, thus illustrating the reversibility in vitro of IBDV capsid assembly. HT-VP2-466 VLP also packed heterologous DNA by non-specific confinement during assembly. These and previous results establish the bases

  6. Characterization of the disassembly and reassembly of the HBV glycoprotein surface antigen, a pliable nanoparticle vaccine platform

    International Nuclear Information System (INIS)

    Gallagher, John R.; Torian, Udana; McCraw, Dustin M.; Harris, Audray K.

    2017-01-01

    While nanoparticle vaccine technology is gaining interest due to the success of vaccines like those for the human papillomavirus that is based on viral capsid nanoparticles, little information is available on the disassembly and reassembly of viral surface glycoprotein-based nanoparticles. One such particle is the hepatitis B virus surface antigen (sAg) that exists as nanoparticles. Here we show, using biochemical analysis coupled with electron microscopy, that sAg nanoparticle disassembly requires both reducing agent to disrupt intermolecular disulfide bonds, and detergent to disrupt hydrophobic interactions that stabilize the nanoparticle. Particles were otherwise resistant to salt and urea, suggesting the driving mechanism of particle formation involves hydrophobic interactions. We reassembled isolated sAg protein into nanoparticles by detergent removal and reassembly resulted in a wider distribution of particle diameters. Knowledge of these driving forces of nanoparticle assembly and stability should facilitate construction of epitope-displaying nanoparticles that can be used as immunogens in vaccines.

  7. [Study on the liver-protective and choleretic effect of zhizi baipi soup and its disassembled prescription].

    Science.gov (United States)

    Xiao, Xu; Zhu, Ji-Xiao; Luo, Guang-Ming; Li, Lei; Zhu, Yu-Ye; Zeng, Jin-Xiang; Wang, Xiao-Yun; Wu, Bo

    2013-07-01

    To investigate the effect of Zhizi Baipi soup and its disassembled prescription on protecting liver and improving choleresis and explore the regularity of Zhizi Baipi soup composition. The model of mouse liver injury induced by carbon tetraehlofide (CCl4) was used to observe the effects of Zhizi Baipi soup and its disassembled prescription by oral adminstration, the bile volume was determinied by common bile duct drainage. Zhizi Baipi soup and each treatment group with gardenia could significantly inhibit the increased serum ATL and AST activities, reduce liver MDA level, and significantly promote the bile flow and bilirubin in bile in normal rats. Zhizi Baipi soup has effects on protecting liver and increasing bile secretion, its monarch drug, gardenia plays an important role in the decoction, the effect of eliminating dampness and heat are mainly ascribed to the synergic effect of gardenia and phellodendron.

  8. The development of underwater remote cutting method for the disassembling of rotary specimen rack KRR-1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D. K.; Jung, K. H.; Lee, K. W.; Oh, W. J. [KAERI, Taejon (Korea, Republic of); Lee, K. Y. [Korea Institute of Industrial Technology, Kwangju (Korea, Republic of)

    2004-07-01

    The Rotary Specimen Racks (RSRs) were highly activated and then classified intermediate level radioactive waste for the decommissioning of KRR-1anel2. The RSR can be treated as low level radioactive waste after removing stainless steel parts. To reduce the volume of intermediate level radioactive waste, underwater cutting is required to separate stainless steel parts from RSR because of high radioactivity. In this study, the automatic remote cutting method was developed to disassemble RSR under water. For automatic remote cutting processes, a CAM (Computer Aided Manufacturing) system is employed. A computer inputs NC (Numerical Control) codes to the controller, which are based on CAM model, and the controller instructs the equipment to process according to NC codes automatically. And the cutting force model was improved to cut RSR stably. The automatic cutting was conducted using imitation of RSR and then it was resulted that the developed automatic cutting method can be safely disassemble stainless steel parts of RSR under water.

  9. Characterization of the disassembly and reassembly of the HBV glycoprotein surface antigen, a pliable nanoparticle vaccine platform

    Energy Technology Data Exchange (ETDEWEB)

    Gallagher, John R.; Torian, Udana; McCraw, Dustin M.; Harris, Audray K., E-mail: harrisau@mail.nih.gov

    2017-02-15

    While nanoparticle vaccine technology is gaining interest due to the success of vaccines like those for the human papillomavirus that is based on viral capsid nanoparticles, little information is available on the disassembly and reassembly of viral surface glycoprotein-based nanoparticles. One such particle is the hepatitis B virus surface antigen (sAg) that exists as nanoparticles. Here we show, using biochemical analysis coupled with electron microscopy, that sAg nanoparticle disassembly requires both reducing agent to disrupt intermolecular disulfide bonds, and detergent to disrupt hydrophobic interactions that stabilize the nanoparticle. Particles were otherwise resistant to salt and urea, suggesting the driving mechanism of particle formation involves hydrophobic interactions. We reassembled isolated sAg protein into nanoparticles by detergent removal and reassembly resulted in a wider distribution of particle diameters. Knowledge of these driving forces of nanoparticle assembly and stability should facilitate construction of epitope-displaying nanoparticles that can be used as immunogens in vaccines.

  10. Spent fuel disassembly hardware and other non-fuel bearing components: characterization, disposal cost estimates, and proposed repository acceptance requirements

    Energy Technology Data Exchange (ETDEWEB)

    Luksic, A.T.; McKee, R.W.; Daling, P.M.; Konzek, G.J.; Ludwick, J.D.; Purcell, W.L.

    1986-10-01

    There are two categories of waste considered in this report. The first is the spent fuel disassembly (SFD) hardware. This consists of the hardware remaining after the fuel pins have been removed from the fuel assembly. This includes end fittings, spacer grids, water rods (BWR) or guide tubes (PWR) as appropriate, and assorted springs, fasteners, etc. The second category is other non-fuel-bearing (NFB) components the DOE has agreed to accept for disposal, such as control rods, fuel channels, etc., under Appendix E of the standard utiltiy contract (10 CFR 961). It is estimated that there will be approximately 150 kg of SFD and NFB waste per average metric ton of uranium (MTU) of spent uranium. PWR fuel accounts for approximately two-thirds of the average spent-fuel mass but only 50 kg of the SFD and NFB waste, with most of that being spent fuel disassembly hardware. BWR fuel accounts for one-third of the average spent-fuel mass and the remaining 100 kg of the waste. The relatively large contribution of waste hardware in BWR fuel, will be non-fuel-bearing components, primarily consisting of the fuel channels. Chapters are devoted to a description of spent fuel disassembly hardware and non-fuel assembly components, characterization of activated components, disposal considerations (regulatory requirements, economic analysis, and projected annual waste quantities), and proposed acceptance requirements for spent fuel disassembly hardware and other non-fuel assembly components at a geologic repository. The economic analysis indicates that there is a large incentive for volume reduction.

  11. ARC: A compact, high-field, disassemblable fusion nuclear science facility and demonstration power plant

    Science.gov (United States)

    Sorbom, Brandon; Ball, Justin; Palmer, Timothy; Mangiarotti, Franco; Sierchio, Jennifer; Bonoli, Paul; Kasten, Cale; Sutherland, Derek; Barnard, Harold; Haakonsen, Christian; Goh, Jon; Sung, Choongki; Whyte, Dennis

    2014-10-01

    The Affordable, Robust, Compact (ARC) reactor conceptual design aims to reduce the size, cost, and complexity of a combined Fusion Nuclear Science Facility (FNSF) and demonstration fusion pilot power plant. ARC is a 270 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has Rare Earth Barium Copper Oxide (REBCO) superconducting toroidal field coils with joints to allow disassembly, allowing for removal and replacement of the vacuum vessel as a single component. Inboard-launched current drive of 25 MW LHRF power and 13.6 MW ICRF power is used to provide a robust, steady state core plasma far from disruptive limits. ARC uses an all-liquid blanket, consisting of low pressure, slowly flowing Fluorine Lithium Beryllium (FLiBe) molten salt. The liquid blanket acts as a working fluid, coolant, and tritium breeder, and minimizes the solid material that can become activated. The large temperature range over which FLiBe is liquid permits blanket operation at 800-900 K with single phase fluid cooling and allows use of a high-efficiency Brayton cycle for electricity production in the secondary coolant loop.

  12. Disassembly of Bacterial Biofilms by the Self-Assembled Glycolipids Derived from Renewable Resources.

    Science.gov (United States)

    Prasad, Yadavali Siva; Miryala, Sandeep; Lalitha, Krishnamoorthy; Ranjitha, K; Barbhaiwala, Shehnaz; Sridharan, Vellaisamy; Maheswari, C Uma; Srinandan, C S; Nagarajan, Subbiah

    2017-11-22

    More than 80% of chronic infections of bacteria are caused by biofilms. It is also a long-term survival strategy of the pathogens in a nonhost environment. Several amphiphilic molecules have been used in the past to potentially disrupt biofilms; however, the involvement of multistep synthesis, complicated purification and poor yield still remains a major problem. Herein, we report a facile synthesis of glycolipid based surfactant from renewable feedstocks in good yield. The nature of carbohydrate unit present in glycolipid influence the ring chain tautomerism, which resulted in the existence of either cyclic structure or both cyclic and acyclic structures. Interestingly, these glycolipids self-assemble into gel in highly hydrophobic solvents and vegetable oils, and displayed foam formation in water. The potential application of these self-assembled glycolipids to disrupt preformed biofilm was examined against various pathogens. It was observed that glycolipid 6a disrupts Staphylococcus aureus and Listeria monocytogenes biofilm, while the compound 6c was effective in disassembling uropathogenic E. coli and Salmonella enterica Typhimurium biofilms. Altogether, the supramolecular self-assembled materials, either as gel or as surfactant solution could be potentially used for surface cleansing in hospital environments or the food processing industries to effectively reduce pathogenic biofilms.

  13. Substantiation of the admissable concentration of radionuclides in the utilization of concrete from disassembled reactors

    International Nuclear Information System (INIS)

    Engovatov, I.A.; Mashkovich, V.P.; Morev, M.N.

    1995-01-01

    The complete or partial disassembly of the buildings and systems of a modern nuclear power plant results in the formation of hundreds of thousands of tons of wastes. More than 90% of this mass consists of reinforced concrete. Only a small fraction of these materials is contaminated and/or activated up to high level and must be treated as radioactive wastes that must be buried. For this reason, it is helpful to consider a variant of recycling of some of the wastes and secondary utilization of these wastes in different industrial production processes. In this paper, we analyze the concrete that is freed when a nuclear power plant is decommissioned, and in particular, we examine three scenarios: (1) stockpiling and long-term storage of concrete at an industrial site, (2) highway construction, and (3) industrial building construction. Admissable radionuclide concentrations of several isotopes are tabulated for each scenario, and the results provide the basic information for the development of standards for the utilization of the concrete wastes produced during the decommissioning of nuclear power plants

  14. Analysis of the stress-deformed condition of the disassembly parabolic antenna

    Science.gov (United States)

    Odinets, M. N.; Kaygorodtseva, N. V.; Krysova, I. V.

    2018-01-01

    Active development of satellite communications and computer-aided design systems raises the problem of designing parabolic antennas on a new round of development. The aim of the work was to investigate the influence of the design of the mirror of a parabolic antenna on its endurance under wind load. The research task was an automated analysis of the stress-deformed condition of various designs of computer models of a paraboloid mirror (segmented or holistic) at modeling the exploitation conditions. The peculiarity of the research was that the assembly model of the antenna’s mirror was subjected to rigid connections on the contacting surfaces of the segments and only then the finite element grid was generated. The analysis showed the advantage of the design of the demountable antenna, which consists of cyclic segments, in front of the construction of the holistic antenna. Calculation of the stress-deformed condition of the antennas allows us to conclude that dividing the design of the antenna’s mirror on parabolic and cyclic segments increases it strength and rigidity. In the future, this can be used to minimize the mass of antenna and the dimensions of the disassembled antenna. The presented way of modeling a mirror of a parabolic antenna using to the method of the finite-element analysis can be used in the production of antennas.

  15. Disassembly of actin structures by nanosecond pulsed electric field is a downstream effect of cell swelling.

    Science.gov (United States)

    Pakhomov, Andrei G; Xiao, Shu; Pakhomova, Olga N; Semenov, Iurii; Kuipers, Marjorie A; Ibey, Bennett L

    2014-12-01

    Disruption of the actin cytoskeleton structures was reported as one of the characteristic effects of nanosecond-duration pulsed electric field (nsPEF) in both mammalian and plant cells. We utilized CHO cells that expressed the monomeric fluorescent protein (mApple) tagged to actin to test if nsPEF modifies the cell actin directly or as a consequence of cell membrane permeabilization. A train of four 600-ns pulses at 19.2 kV/cm (2 Hz) caused immediate cell membrane poration manifested by YO-PRO-1 dye uptake, gradual cell rounding and swelling. Concurrently, bright actin features were replaced by dimmer and uniform fluorescence of diffuse actin. To block the nsPEF-induced swelling, the bath buffer was isoosmotically supplemented with an electropore-impermeable solute (sucrose). A similar addition of a smaller, electropore-permeable solute (adonitol) served as a control. We demonstrated that sucrose efficiently blocked disassembly of actin features by nsPEF, whereas adonitol did not. Sucrose also attenuated bleaching of mApple-tagged actin in nsPEF-treated cells (as integrated over the cell volume), although did not fully prevent it. We conclude that disintegration of the actin cytoskeleton was a result of cell swelling, which, in turn, was caused by cell permeabilization by nsPEF and transmembrane diffusion of solutes which led to the osmotic imbalance. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Role of a reducing environment in disassembly of the herpesvirus tegument

    Energy Technology Data Exchange (ETDEWEB)

    Newcomb, William W. [Department of Microbiology Immunology and Cancer Biology, University of Virginia Health System, Box 800734, University of Virginia Health System, 1300 Jefferson Park Ave. Charlottesville, VA 22908 (United States); Jones, Lisa M. [Department of Chemistry, Washington University in St. Louis, St. Louis, MO 63130 (United States); Dee, Alexander [Department of Molecular, Microbial and Structural Biology, University of Connecticut Health Center, Farmington, CT 06030 (United States); Chaudhry, Farid [Department of Microbiology Immunology and Cancer Biology, University of Virginia Health System, Box 800734, University of Virginia Health System, 1300 Jefferson Park Ave. Charlottesville, VA 22908 (United States); Brown, Jay C., E-mail: JCB2G@VIRGINIA.EDU [Department of Microbiology Immunology and Cancer Biology, University of Virginia Health System, Box 800734, University of Virginia Health System, 1300 Jefferson Park Ave. Charlottesville, VA 22908 (United States)

    2012-09-15

    Initiation of infection by herpes family viruses involves a step in which most of the virus tegument becomes detached from the capsid. Detachment takes place in the host cell cytosol near the virus entry site and it is followed by dispersal of tegument proteins and disappearance of the tegument as a distinct entity. Here we describe the results of experiments designed to test the idea that the reducing environment of the cytosol may contribute to tegument detachment and disassembly. Non-ionic detergent was used to remove the membrane of purified herpes simplex virus under control and reducing conditions. The effects on the tegument were then examined by SDS-PAGE and electron microscopy. Protein analysis demonstrated that most major tegument proteins were removed under both oxidizing and reducing conditions except for UL49 which required a reducing environment. It is proposed therefore that the reducing conditions in the cytosol are involved in removal of UL49 protein. Electron microscopic analysis revealed that capsids produced under oxidizing conditions contained a coating of protein that was absent in reduced virions and which correlated uniquely with the presence of UL49. This capsid-associated layer is suggested to be the location of UL49 in the extracted virion.

  17. The Effect of Uncertain End-of-Life Product Quality and Consumer Incentives on Partial Disassembly Sequencing in Value Recovery Operations

    OpenAIRE

    Rickli, Jeremy Lewis

    2013-01-01

    This dissertation addresses gaps in the interaction between End-of-Life (EoL) product acquisition systems and disassembly sequencing. The research focuses on two remanufacturing research problems; 1) modeling uncertain EoL product quality, quantity, and timing in regards to EoL product acquisition and disassembly sequencing and 2) designing EoL product acquisition schemes considering EoL product uncertainty. The main research objectives within these areas are; analyzing, predicting, and contr...

  18. New findings on the onset of thermal disassembly in spallation reactions

    International Nuclear Information System (INIS)

    Napolitani, P.

    2004-09-01

    Thermal multifragmentation is the process of multi body disassembly of a hot nucleus when the excitation is almost purely thermal i.e. dynamical effects like compression (characteristic of ion-ion collisions at Fermi energy) are negligible. Suited reactions are proton induced collision or ion-ion abrasion at relativistic incident energy. Thus we measured four systems at FRS (Fragment separator, GSI, Darmstadt) in inverse kinematics: Fe 56 +p, Fe 56 +Ti(nat), Xe 136 +p, Xe 136 +Ti(nat) a 1 A*GeV. The inverse kinematics allows to observe all particles without any threshold in energy. This is a great advantage compared to experiments in direct kinematics, because only in inverse kinematics it is possible to obtain complete velocity spectra (without a hole for low velocities) for fully identified isotopes. The complex shape of the velocity spectra allows to identify the different deexcitation channels and it clearly shows the transition from a chaotic-dominated process (Gaussian cloud in velocity space) to a direct Coulomb- (or eventually expansion-) dominated process (shell of a sphere in velocity space). Different possible descriptions of the reaction process are discussed, based either on asymmetric fission or multifragmentation. The resulting physical picture is especially interesting for the Fe 56 +p, and Xe 136 +p systems: proton induced collisions could result in the split of the system in two or more fragments due to a fast break-up process. In this case, the configuration of the break-up partition is very asymmetric. The discussion will be extended to other characteristics, like the restoring of nuclear structure features in the isotopic production and the temperature dependence of the isotopic composition of the residues. (author)

  19. Sodium removal disassembly and examination of the Fermi secondary sodium pump

    International Nuclear Information System (INIS)

    Maffei, H.P.; Funk, C.W.; Ballif, J.L.

    1974-01-01

    The Fermi secondary pump is a centrifugal single stage design. The pump had been operated more than 42,000 hours between 450 and 800 0 F. Sodium was drained from the pump in 1973 and the system was back filled with carbon dioxide. The pump was fabricated for 2.25 Cr-1 Mo Croloy steel. Prior to cleaning the pump was inerted and heated with 150 0 F nitrogen using the pump casing as the containment vessel. The water-vapor-nitrogen process was used in three increasing stages of water concentration. The hydrogen concentration in the discharge line was followed as an indicator of the sodium-water reaction rate. Upon completion of the hydrogen evolution, the pump was rinsed several times with hot water. Six pounds of sodium were removed from the pump during a process cycle of 79 hours including rinsing. The maximum pump temperature recorded was 175 0 F with no variation exceeding 10 0 F. The hydrogen concentration in the effluent provided a very satisfactory index for control of the reaction by adjustment of the water-vapor concentration feed to the system. Rinsing effectiveness was limited by a pool of water in the volute that was not drainable with the available system hook up. Sodium and its compounds were removed from all internal surfaces that could be observed by the first stage of disassembly. All such surfaces were coated with a black deposit. Areas above the sodium liquid level were coated with a vermillion colored oxide. Sodium was found on the (1) threads of the impeller nut lock screw, (2) impeller nut-tapered shaft interface, and (3) vapor deposited sodium was found in the oil seal

  20. Nucleolus disassembly and distribution of segregated nucleolar material in prophase of root-tip meristematic cells in Triticum aestivum L.

    Directory of Open Access Journals (Sweden)

    Wang Jianyue

    2015-01-01

    Full Text Available This paper presents details of the process of nucleolar disassembly, studied by conventional transmission electron microscopy (TEM in wheat root cells. In early prophase, chromatin condensation and irregular nucleolar morphology are observed, with many small particles appearing around the nucleolus. In middle prophase, the nucleolus radiates outwards; in late prophase, the fine structure of the nucleolus disappears and nucleolar material diffuses away. Using “en bloc” silver-staining to distinguish between nucleoli and chromatin, we observed that the dispersed nucleolar material aggregates around the chromatin, forming a sheath-like perichromosomal structure that coats the chromosomes in late prophase.

  1. Control of cell volume in the J774 macrophage by microtubule disassembly and cyclic AMP

    Science.gov (United States)

    Melmed, RN; Karanian, PJ; Berlin, RD

    1981-01-01

    We have explored the possibilities that cell volume is regulated by the status of microtubule assembly and cyclic AMP metabolism and may be coordinated with shape change. Treatment of J774.2 mouse macrophages with colchicine caused rapid microtubule disassembly and was associated with a striking increase (from 15-20 to more than 90 percent) in the proportion of cells with a large protuberance at one pole. This provided a simple experimental system in which shape changes occurred in virtually an entire cell population in suspension. Parallel changes in cell volume could then be quantified by isotope dilution techniques. We found that the shape change caused by colchicine was accompanied by a decrease in cell volume of approximately 20 percent. Nocodozole, but not lumicolchicine, caused identical changes in both cell shape and cell volume. The volume loss was not due to cell lysis nor to inhibition of pinocytosis. The mechanism of volume loss was also examined. Colchicine induced a small but reproducible increase in activity of the ouabain-sensitive Na(+), K(+)-dependent ATPase. However, inhibition of this enzyme/transport system by ouabain did not change cell volume nor did it block the colchicines-induced decrease in volume. One the other hand, SITS (4’acetamido, 4-isothiocyano 2,2’ disulfonic acid stilbene), an inhibitor of anion transport, inhibited the effects of colchicines, thus suggesting a role for an anion transport system in cell volume regulation. Because colchicine is known to activate adenylate cyclase in several systems and because cell shape changes are often induced by hormones that elevate cyclic AMP, we also examined the effects of cyclic AMP on cell volume. Agents that act to increase syclic AMP (cholera toxin, which activates adenylate cyclase; IBMX, and inhibitor of phosphodiesterase; and dibutyryl cyclic AMP) all caused a volume decrease comparable to that of colchicine. To define the effective metabolic pathway, we studied two mutants of J

  2. Actin-interacting Protein 1 Promotes Disassembly of Actin-depolymerizing Factor/Cofilin-bound Actin Filaments in a pH-dependent Manner.

    Science.gov (United States)

    Nomura, Kazumi; Hayakawa, Kimihide; Tatsumi, Hitoshi; Ono, Shoichiro

    2016-03-04

    Actin-interacting protein 1 (AIP1) is a conserved WD repeat protein that promotes disassembly of actin filaments when actin-depolymerizing factor (ADF)/cofilin is present. Although AIP1 is known to be essential for a number of cellular events involving dynamic rearrangement of the actin cytoskeleton, the regulatory mechanism of the function of AIP1 is unknown. In this study, we report that two AIP1 isoforms from the nematode Caenorhabditis elegans, known as UNC-78 and AIPL-1, are pH-sensitive in enhancement of actin filament disassembly. Both AIP1 isoforms only weakly enhance disassembly of ADF/cofilin-bound actin filaments at an acidic pH but show stronger disassembly activity at neutral and basic pH values. However, a severing-defective mutant of UNC-78 shows pH-insensitive binding to ADF/cofilin-decorated actin filaments, suggesting that the process of filament severing or disassembly, but not filament binding, is pH-dependent. His-60 of AIP1 is located near the predicted binding surface for the ADF/cofilin-actin complex, and an H60K mutation of AIP1 partially impairs its pH sensitivity, suggesting that His-60 is involved in the pH sensor for AIP1. These biochemical results suggest that pH-dependent changes in AIP1 activity might be a novel regulatory mechanism of actin filament dynamics. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  3. Characterization of spent fuel disassembly hardware and nonfuel bearing components and their relationship to 10 CFR 61

    International Nuclear Information System (INIS)

    Luksic, A.T.

    1987-02-01

    There are a variety of wastes that will be disposed of by the federal waste management system under the Nuclear Waste Policy Act of 1982. The primary waste form is spent nuclear fuel. Currently, this is in the form of fuel assemblies. If the fuel pins are removed from the fuel assembly, as in consolidation, then the fuel pins and the structural portion of the fuel assembly must be considered as separate waste streams. The structural hardware consists of end fittings, grid spacers, water rods (BWR 8 x 8 only), control rod guide tubes (PWR only) and various nuts, washers, springs, etc. These are referred to as spent fuel disassembly (SFD) hardware. There will also be a number of other components which are defined in Appendix E of 10 CFR 961, the standard utility contract. These are referred to as nonfuel-bearing (NFB) components, and include fuel channels (BWR), control rods, fission chambers, neutron sources, thimble plugs, and other components. This paper characterizes spent fuel disassembly (SFD) hardware, and nonfuel-bearing (NFB) components for the most abundant fuel types. The descriptions and figures given are representative for the items described. Many subvariants exist due to design evaluation, which are not covered. This paper also discusses the relationship of these wastes to 10 CFR 61 waste classification

  4. Spiropyran-Decorated SiO₂-Pt Janus Micromotor: Preparation and Light-Induced Dynamic Self-Assembly and Disassembly.

    Science.gov (United States)

    Zhang, Qilu; Dong, Renfeng; Chang, Xueyi; Ren, Biye; Tong, Zhen

    2015-11-11

    The controlled self-assembly of self-propelled Janus micromotors may give the micromotors some potential applications in many fields. In this work, we design a kind of SiO2-Pt Janus catalytic micromotor functionalized by spiropyran (SP) moieties on the surface of the SiO2 hemisphere. The spiropyran-modified SiO2-Pt Janus micromotor exhibits autonomous self-propulsion in the presence of hydrogen peroxide fuel in N,N-dimethylformamide (DMF)/H2O (1:1 in volume) mixture. We demonstrate that the self-propelled Janus micromotors can dynamically assemble into multiple motors because of the electrostatic attractions and π-π stacking between MC molecules induced by UV light irradiation (λ = 365 nm) and also quickly disassemble into mono motors when the light is switched to green light (λ = 520 nm) for the first time. Furthermore, the assembled Janus motors can move together automatically with different motion patterns propelled by the hydrogen peroxide fuels upon UV irradiation. The work provides a new approach not only to the development of the potential application of Janus motors but also to the fundamental science of reversible self-assembly and disassembly of Janus micromotors.

  5. Technical review of WSRC-TR-93-614 criticality safety evaluation for disassembly basin sand filter

    International Nuclear Information System (INIS)

    Reed, R.L.

    1994-01-01

    The study documented in WSRC-TR-93-614 performed an evaluation of the criticality potential associated with the Disassembly Basin Sand Filter for K and L Areas. The document reviewed incorporated results of calculations documented in the engineering calculation N-CLC-K-00151. Analyses of the contents of disassembly basin sludge has indicated that the sludge contains fissile material in excess of subcritical mass limits as specified in ANSI/ANS standards. Previous studies had determined that the fissile material can not collect into a critical configuration in the basin. Since the sand filter is intended to remove suspended particles from the basin water and could serve as a mechanism to collect the fissile material into a critical configuration, the study examined conditions under which criticality could occur in the sand filter. The study shows that criticality is not considered possible in the sand filter. This review emphasized the technical accuracy and presentation of the evaluation. The evaluation was also examined for the elements required for NCSEs. The review was performed in accordance with the NRTSC technical review requirements and procedures and the E7 Manual technical review requirements. The technical review (per the E7 manual) of the engineering calculation (N-CLC-K-0 1 5 1) was previously performed by this reviewer

  6. T1R3 homomeric sweet taste receptor regulates adipogenesis through Gαs-mediated microtubules disassembly and Rho activation in 3T3-L1 cells.

    Directory of Open Access Journals (Sweden)

    Yosuke Masubuchi

    Full Text Available We previously reported that 3T3-L1 cells express a functional sweet taste receptor possibly as a T1R3 homomer that is coupled to Gs and negatively regulates adipogenesis by a Gαs-mediated but cAMP-independent mechanism. Here, we show that stimulation of this receptor with sucralose or saccharin induced disassembly of the microtubules in 3T3-L1 preadipocytes, which was attenuated by overexpression of the dominant-negative mutant of Gαs (Gαs-G226A. In contrast, overexpression of the constitutively active mutant of Gαs (Gαs-Q227L as well as treatment with cholera toxin or isoproterenol but not with forskolin caused disassembly of the microtubules. Sweetener-induced microtubule disassembly was accompanied by activation of RhoA and Rho-associated kinase (ROCK. This was attenuated with by knockdown of GEF-H1, a microtubule-localized guanine nucleotide exchange factor for Rho GTPase. Furthermore, overexpression of the dominant-negative mutant of RhoA (RhoA-T19N blocked sweetener-induced dephosphorylation of Akt and repression of PPARγ and C/EBPα in the early phase of adipogenic differentiation. These results suggest that the T1R3 homomeric sweet taste receptor negatively regulates adipogenesis through Gαs-mediated microtubule disassembly and consequent activation of the Rho/ROCK pathway.

  7. Nucleolus disassembly in mitosis and apoptosis: dynamic redistribution of phosphorylated-c-Myc, fibrillarin and Ki-67

    Directory of Open Access Journals (Sweden)

    C Soldani

    2009-06-01

    Full Text Available The nucleolus may undergo disassembly either reversibly during mitosis, or irreversibly in apoptosis, thus allowing the redistribution of the nucleolar proteins.We investigated here by immunocytochemistry the fate of three representative proteins, namely phosphorylated c-Myc, fibrillarin and Ki-67, and found that they behave independently in both processes: they relocate in distinct compartments during mitosis, whereas during apoptosis they may either be cleaved (Ki-67 or be extruded into the cytoplasm with a different kinetics and following an ordered, non chaotic program. The separation of these nucleolar proteins which occurs in early apoptotic nuclei continues also in the cytoplasm, and culminates in the final formation of apoptotic blebs containing different nucleolar proteins: this evidence confirms that the apoptotic bodies may be variable in size, content and surface reactivity, and include heterogeneous aggregates of nuclear proteins and/or nucleic acids.

  8. The Chloroplast Division Protein ARC6 Acts to Inhibit Disassembly of GDP-bound FtsZ2.

    Science.gov (United States)

    Sung, Min Woo; Shaik, Rahamthulla; TerBush, Allan D; Osteryoung, Katherine W; Vitha, Stanislav; Holzenburg, Andreas

    2018-05-16

    Chloroplasts host photosynthesis and fulfill other metabolic functions that are essential to plant life. They have to divide by binary fission to maintain their numbers throughout cycles of cell division. Chloroplast division is achieved by a complex ring-shaped division machinery located on both the inner (stromal) and the outer (cytosolic) side of the chloroplast envelope. The inner division ring (termed the Z ring) is formed by the assembly of tubulin-like FtsZ1 and FtsZ2 proteins. ARC6 is a key chloroplast division protein that interacts with the Z ring. ARC6 spans the inner envelope membrane, is known to stabilize or maintain the Z ring, and anchors the Z ring to the inner membrane through interaction with FtsZ2. The underlying mechanism of Z-ring stabilization is not well understood. Here, biochemical and structural characterization of ARC6 was conducted using light scattering, sedimentation, and light and transmission electron microscopy. The recombinant protein was purified as a dimer. The results indicated that a truncated form of ARC6 (tARC6), representing the stromal portion of ARC6, affects FtsZ2 assembly without forming higher-order structures, and exerts its effect via FtsZ2 dynamics. tARC6 prevented GDP-induced FtsZ2 disassembly and caused a significant net increase in FtsZ2 assembly when GDP was present. Single particle analysis and 3D reconstruction were performed to elucidate the structural basis of ARC6 activity. Together, the data reveal that a dimeric form of tARC6 binds to FtsZ2 filaments and does not increase FtsZ polymerization rates but rather inhibits GDP-associated FtsZ2 disassembly. Published under license by The American Society for Biochemistry and Molecular Biology, Inc.

  9. Role of Melatonin in Cell-Wall Disassembly and Chilling Tolerance in Cold-Stored Peach Fruit.

    Science.gov (United States)

    Cao, Shifeng; Bian, Kun; Shi, Liyu; Chung, Hsiao-Hang; Chen, Wei; Yang, Zhenfeng

    2018-06-06

    Melatonin reportedly increases chilling tolerance in postharvest peach fruit during cold storage, but information on its effects on cell-wall disassembly in chilling-injured peaches is limited. In this study, we investigated the role of cell-wall depolymerization in chilling-tolerance induction in melatonin-treated peaches. Treatment with 100 μM melatonin alleviated chilling symptoms (mealiness) characterized by a decrease in fruit firmness and increase in juice extractability in treated peaches during storage. The loss of neutral sugars, such as arabinose and galactose, in both the 1,2-cyclohexylenedinitrilotetraacetic acid (CDTA)- and Na 2 CO 3 -soluble fractions was observed at 7 days in treated peaches, but the contents increased after 28 days of storage. Atomic-force-microscopy (AFM) analysis revealed that the polysaccharide widths in the CDTA- and Na 2 CO 3 -soluble fractions in the treated fruit were mainly distributed in a shorter range, as compared with those in the control fruit. In addition, the expression profiles of a series of cell-wall-related genes showed that melatonin treatment maintained the balance between transcripts of PpPME and PpPG, which accompany the up-regulation of several other genes involved in cell-wall disassembly. Taken together, our results suggested that the reduced mealiness by melatonin was probably associated with its positive regulation of numerous cell-wall-modifying enzymes and proteins; thus, the depolymerization of the cell-wall polysaccharides in the peaches treated with melatonin was maintained, and the treated fruit could soften gradually during cold storage.

  10. Evidence of the Disassembly of α-Cyclodextrin-octylamine Inclusion Compounds Conjugated to Gold Nanoparticles via Thermal and Photothermal Effects

    Directory of Open Access Journals (Sweden)

    Nataly Silva

    2016-10-01

    Full Text Available Cyclodextrin (CD molecules form inclusion compounds (ICs, generating dimers that are capable of encapsulating molecules derived from long-chain hydrocarbons. The aim of this study is to evaluate the structural changes experienced by ICs in solution with increasing temperatures. For this, a nuclear magnetic resonance (1H-NMR titration was performed to determinate the stoichiometric α-cyclodextrin (α-CD:octylamine (OA 2:1 and binding constant (k = 2.16 M−2 of ICs. Solution samples of α-CD-OA ICs conjugated with gold nanoparticles (AuNPs were prepared, and 1H-NMR spectra at different temperatures were recorded. Comparatively, 1H-NMR spectra of the sample irradiated with a laser with tunable wavelengths, with plasmons of conjugated AuNPs, were recorded. In this work, we present evidence of the disassembly of ICs conjugated with AuNPs. Thermal studies demonstrated that, at 114 °C, there are reversible rearrangements of the host and guests in the ICs in a solid state. Migration movements of the guest molecules from the CD cavity were monitored via temperature-dependent 1H-NMR, and were verified comparing the chemical shifts of octylamine dissolved in deuterated dimethylsulfoxide (DMSO-d6 with the OA molecule included in α-CD dissolved in the same solvent. It was observed that, at 117 °C, OA exited the α-CD cavity. CD IC dimer disassembly was also observed when the sample was irradiated with green laser light.

  11. The pedagogical value of Disassemble/Analyze/Assemble (DAA) activities: Assessing the potential for motivation and transfer

    Science.gov (United States)

    Dalrymple, Odesma Onika

    Undergraduate engineering institutions are currently seeking to improve recruiting practices and to retain engineering majors particularly by addressing what many studies document as a major challenge of poor instruction. There is an undisputed need for instructional practices that motivate students in addition to facilitating the transfer of learning beyond the classroom. Reverse engineering and product dissection, more broadly termed Disassemble/Analyze/Assemble (DAA) activities, have shown potential to address these concerns, based on the reviews of students and professors alike. DAA activities involve the systematic deconstruction of an artifact, the subsequent analysis and possible reconstruction of its components for the purpose of understanding the embodied fundamental concepts, design principles and developmental processes. These activities have been part of regular industry practice for some time; however, the systematic analysis of their benefits for learning and instruction is a relatively recent phenomenon. A number of studies have provided highly descriptive accounts of curricula and possible outcomes of DAA activities; but, relatively few have compared participants doing DAA activities to a control group doing more traditional activities. In this respect, two quasi-experiments were conducted as part of a first-year engineering laboratory, and it was hypothesized that students who engaged in the DAA activity would be more motivated and would demonstrate higher frequencies of transfer than the control. A DAA activity that required students to disassemble a single-use camera and analyze its components to discover how it works was compared to a step-by-step laboratory activity in the first experiment and a lecture method of instruction in the second experiment. In both experiments, over forty percent of the students that engaged in the DAA activity demonstrated the ability to transfer the knowledge gained about the functions of the camera's components and

  12. Rough order of magnitude cost estimate for immobilization of 50 MT of plutonium sharing existing facilities at Hanford with pit disassembly and conversion facility: alternative 11

    International Nuclear Information System (INIS)

    DiSabatino, A.

    1998-01-01

    The purpose of this Cost Estimate Report is to identify preliminary capital and operating costs for a facility to immobilize 50 metric tons (nominal) of plutonium as a ceramic in an existing facility at Hanford, the Fuels and Materials Examination Facility (FMEF). The Pit Disassembly and Conversion Facility (PDCF), which is being costed in a separate report by LANL, will also be located in the FMEF in this co-location option

  13. TFG facilitates outer coat disassembly on COPII transport carriers to promote tethering and fusion with ER-Golgi intermediate compartments.

    Science.gov (United States)

    Hanna, Michael G; Block, Samuel; Frankel, E B; Hou, Feng; Johnson, Adam; Yuan, Lin; Knight, Gavin; Moresco, James J; Yates, John R; Ashton, Randolph; Schekman, Randy; Tong, Yufeng; Audhya, Anjon

    2017-09-12

    The conserved coat protein complex II (COPII) mediates the initial steps of secretory protein trafficking by assembling onto subdomains of the endoplasmic reticulum (ER) in two layers to generate cargo-laden transport carriers that ultimately fuse with an adjacent ER-Golgi intermediate compartment (ERGIC). Here, we demonstrate that Trk-fused gene (TFG) binds directly to the inner layer of the COPII coat. Specifically, the TFG C terminus interacts with Sec23 through a shared interface with the outer COPII coat and the cargo receptor Tango1/cTAGE5. Our findings indicate that TFG binding to Sec23 outcompetes these other associations in a concentration-dependent manner and ultimately promotes outer coat dissociation. Additionally, we demonstrate that TFG tethers vesicles harboring the inner COPII coat, which contributes to their clustering between the ER and ERGIC in cells. Together, our studies define a mechanism by which COPII transport carriers are retained locally at the ER/ERGIC interface after outer coat disassembly, which is a prerequisite for fusion with ERGIC membranes.

  14. Evaluation of nuclear facility decommissioning projects. Three Mile Island Unit 2 reactor defueling and disassembly. Summary status report. Volume 3

    International Nuclear Information System (INIS)

    Doerge, D.H.; Miller, R.L.; Scotti, K.S.

    1986-05-01

    This document summarizes information relating to the preparations for defueling the Three Mile Island Unit 2 (TMI-2) reactor and disassembly activities being performed concurrently with decontamination of the facility. Data have been collected from activity reports, reactor containment entry records, and other sources and entered in a computerized data sysem which permits extraction/manipulation of specific data which can be used in planning for recovery from a loss of coolant event similar to that experienced at TMI-2 on March 28, 1979. This report contains summaries of man-hours, manpower, and radiation exposures incurred during the period of April 23, 1979 to April 16, 1985, in the completion of activities related to preparation for reactor defueling. Support activities conducted outside of radiation areas are not included within the scope of this report. Computerized reports included in this document are: A chronological summary listing work performed for the period; and summary reports for each major task undertaken in connection with the specific scope of this report. Presented in chronological order for the referenced time period. Manually-assembled table summaries are included for: Labor and exposures by department; and labor and exposures by major activity

  15. Studies and research concerning BNFP design and construction of a spent-fuel disassembly/encapsulation system

    International Nuclear Information System (INIS)

    Dabolt, R.J.

    1981-04-01

    Commercial light water power reactor operation in the United States is developing a cumbersome inventory of spent fuel. Systems for interim storage and handling of this fuel are being developed by the Federal Government and industry. Disassembly and canning of the spent fuel elements is one of these systems. It has the potential to double the storage capacity of a prereprocessing storage facility or to triple the capacity of conventional shipping casks. Prototype equipment and controls required to perform this operation in a dry environment have been primarily designed and fabricated at the Barnwell Nuclear Fuel Plant (BNFP). Ridihalgh, Eggers, and Associates have provided design support and fabrication of the control system. This system is capable of extracting and canning the fuel pins and compacting the nonfuel-bearing components of spent fuel assemblies at processing rates of 10 to 12 assemblies per day. The process also provides the potential for enhanced inspection and assay of spent fuel by reducing the interference encountered from the high gamma fields of the nonfuel bearing hardware

  16. Disassembly of microtubules and inhibition of neurite outgrowth, neuroblastoma cell proliferation, and MAP kinase tyrosine dephosphorylation by dibenzyl trisulphide.

    Science.gov (United States)

    Rösner, H; Williams, L A; Jung, A; Kraus, W

    2001-08-22

    Dibenzyl trisulphide (DTS), a main lipophilic compound in Petiveria alliacea L. (Phytolaccaceae), was identified as one of the active immunomodulatory compounds in extracts of the plant. To learn more about its biological activities and molecular mechanisms, we conducted one-dimensional NMR interaction studies with bovine serum albumin (BSA) and tested DTS and related compounds in two well-established neuronal cell-and-tissue culture systems. We found that DTS preferentially binds to an aromatic region of BSA which is rich in tyrosyl residues. In SH-SY5Y neuroblastoma cells, DTS attenuates the dephosphorylation of tyrosyl residues of MAP kinase (erk1/erk2). In the same neuroblastoma cell line and in Wistar 38 human lung fibroblasts, DTS causes a reversible disassembly of microtubules, but it did not affect actin dynamics. Probably due to the disruption of the microtubule dynamics, DTS also inhibits neuroblastoma cell proliferation and neurite outgrowth from spinal cord explants. Related dibenzyl compounds with none, one, or two sulphur atoms were found to be significantly less effective. These data confirmed that the natural compound DTS has a diverse spectrum of biological properties, including cytostatic and neurotoxic actions in addition to immunomodulatory activities.

  17. Wood cell-wall structure requires local 2D-microtubule disassembly by a novel plasma membrane-anchored protein.

    Science.gov (United States)

    Oda, Yoshihisa; Iida, Yuki; Kondo, Yuki; Fukuda, Hiroo

    2010-07-13

    Plant cells have evolved cortical microtubules, in a two-dimensional space beneath the plasma membrane, that regulate patterning of cellulose deposition. Although recent studies have revealed that several microtubule-associated proteins facilitate self-organization of transverse cortical microtubules, it is still unknown how diverse patterns of cortical microtubules are organized in different xylem cells, which are the major components of wood. Using our newly established in vitro xylem cell differentiation system, we found that a novel microtubule end-tracking protein, microtubule depletion domain 1 (MIDD1), was anchored to distinct plasma membrane domains and promoted local microtubule disassembly, resulting in pits on xylem cell walls. The introduction of RNA interference for MIDD1 resulted in the failure of local microtubule depletion and the formation of secondary walls without pits. Conversely, the overexpression of MIDD1 reduced microtubule density. MIDD1 has two coiled-coil domains for the binding to microtubules and for the anchorage to plasma membrane domains, respectively. Combination of the two coils caused end tracking of microtubules during shrinkage and suppressed their rescue events. Our results indicate that MIDD1 integrates spatial information in the plasma membrane with cortical microtubule dynamics for determining xylem cell wall pattern. Copyright 2010 Elsevier Ltd. All rights reserved.

  18. Cesium removal from the fuel storage water at the Savannah River Site R-Building Disassembly Basin using 3M Empore reg-sign-membrane filter technology

    International Nuclear Information System (INIS)

    Oji, L.N.; Thompson, M.C.; Peterson, K.; May, C.; Kafka, T.M.

    1998-01-01

    This report describes results from a seven-day demonstration of the use of 3M Empore membrane filter loaded with ion exchange material (potassium cobalt hexacynoferrate (CoHex)) for cesium uptake from the R-Disassembly Basin at the Savannah River Site. The goal of the demonstration was to evaluate the ability of the Process Absorber Development unit (PADU), a water pre-filtration /CoHex configuration on a skid, to remove cesium from R-Disassembly Basin at a linear processing flow rate of 22.7 liters per minute (1,195.8 liters/minute/m 2 or 29.35 gallons/minute/ft 2 ). Over 210,000 liters (> 55,500 gallons) of R-Disassembly Basin water was processed through the PADU without a cesium breakthrough, that is, the effluent after treatment with CoHex, contained less than detectable amounts of radioactive cesium. Some of the observed advantages of the Empore membrane filter technology over conventional packed column ion exchange systems includes rapid flow rates without channeling effects, low volume secondary waste and fast extraction or rapid kinetics per unit of flow

  19. FaCT phase-I evaluation on the advanced aqueous reprocessing process (2). Development of mechanical disassembly and short stroke shearing systems for FBR fuel reprocessing

    International Nuclear Information System (INIS)

    Takeuchi, Masayuki; Kitagaki, Toru; Higuchi, Hidetoshi; Fukushima, Mineo; Washiya, Tadahiro; Kobayashi, Tsuguyuki

    2011-01-01

    JAEA promotes a development of an advanced head-end process in FaCT project. We selected mechanical cutting method for disassembly process and short stroke method for shearing process. In the FaCT phase-I, the criteria was set for decision about the innovative technology and some fundamental performances of the innovative technology such as precision, speed, durability, operation performance and system concept were discussed by the engineering test and design work. We designed and fabricated an engineering-scale test device for mechanical disassembly and short stroke shearing and have carried out the engineering tests using simulated fuel assemblies. As a part of the engineering test results, the effects of cutting conditions on the durability of cutting tool and cutting stability were discussed. Also, the reduction of magazine width is effective to improve the precision of sheared pin length, and the bundle of simulated fuel pins were successfully sheared to 10 ± 5mm, which is a target for the sheared pin length. The criteria for the mechanical disassembly technology and the short stroke shearing technology were satisfied, so we judged that the development of innovative technologies has worth going on for the next phase in the FaCT project. (author)

  20. Final Status Survey Report for Corrective Action Unit 117 - Pluto Disassembly Facility, Building 2201, Nevada National Security Site, Nevada

    International Nuclear Information System (INIS)

    Gwin, Jeremy; Frenette, Douglas

    2010-01-01

    This document contains the process knowledge, radiological data and subsequent statistical methodology and analysis to support approval for the radiological release of Corrective Action Unit (CAU) 117 - Pluto Disassembly Facility, Building 2201 located in Area 26 of the Nevada National Security Site (NNSS). Preparations for release of the building began in 2009 and followed the methodology described in the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM). MARSSIM is the DOE approved process for release of Real Property (buildings and landmasses) to a set of established criteria or authorized limits. The pre-approved authorized limits for surface contamination values and corresponding assumptions were established by DOE O 5400.5. The release criteria coincide with the acceptance criteria of the U10C landfill permit. The U10C landfill is the proposed location to dispose of the radiologically non-impacted, or ''clean,'' building rubble following demolition. However, other disposition options that include the building and/or waste remaining at the NNSS may be considered providing that the same release limits apply. The Final Status Survey was designed following MARSSIM guidance by reviewing historical documentation and radiological survey data. Following this review a formal radiological characterization survey was performed in two phases. The characterization revealed multiple areas of residual radioactivity above the release criteria. These locations were remediated (decontaminated) and then the surface activity was verified to be less than the release criteria. Once remediation efforts had been successfully completed, a Final Status Survey Plan (10-015, ''Final Status Survey Plan for Corrective Action Unit 117 - Pluto Disassembly Facility, Building 2201'') was developed and implemented to complete the final step in the MARSSIM process, the Final Status Survey. The Final Status Survey Plan consisted of categorizing each individual room into one

  1. Expert System analysis of non-fuel assembly hardware and spent fuel disassembly hardware: Its generation and recommended disposal

    International Nuclear Information System (INIS)

    Williamson, D.A.

    1991-01-01

    Almost all of the effort being expended on radioactive waste disposal in the United States is being focused on the disposal of spent Nuclear Fuel, with little consideration for other areas that will have to be disposed of in the same facilities. one area of radioactive waste that has not been addressed adequately because it is considered a secondary part of the waste issue is the disposal of the various Non-Fuel Bearing Components of the reactor core. These hardware components fall somewhat arbitrarily into two categories: Non-Fuel Assembly (NFA) hardware and Spent Fuel Disassembly (SFD) hardware. This work provides a detailed examination of the generation and disposal of NFA hardware and SFD hardware by the nuclear utilities of the United States as it relates to the Civilian Radioactive Waste Management Program. All available sources of data on NFA and SFD hardware are analyzed with particular emphasis given to the Characteristics Data Base developed by Oak Ridge National Laboratory and the characterization work performed by Pacific Northwest Laboratories and Rochester Gas ampersand Electric. An Expert System developed as a portion of this work is used to assist in the prediction of quantities of NFA hardware and SFD hardware that will be generated by the United States' utilities. Finally, the hardware waste management practices of the United Kingdom, France, Germany, Sweden, and Japan are studied for possible application to the disposal of domestic hardware wastes. As a result of this work, a general classification scheme for NFA and SFD hardware was developed. Only NFA and SFD hardware constructed of zircaloy and experiencing a burnup of less than 70,000 MWD/MTIHM and PWR control rods constructed of stainless steel are considered Low-Level Waste. All other hardware is classified as Greater-ThanClass-C waste

  2. MgATP hydrolysis destabilizes the interaction between subunit H and yeast V1-ATPase, highlighting H's role in V-ATPase regulation by reversible disassembly.

    Science.gov (United States)

    Sharma, Stuti; Oot, Rebecca A; Wilkens, Stephan

    2018-05-12

    Vacuolar H+-ATPases (V-ATPases; V1Vo-ATPases) are rotary motor proton pumps that acidify intracellular compartments and in some tissues, the extracellular space. V-ATPase is regulated by reversible disassembly into autoinhibited V1-ATPase and Vo proton channel sectors. An important player in V-ATPase regulation is subunit H, which binds at the interface of V1 and Vo. H is required for MgATPase activity in holo V-ATPase, but also for stabilizing the MgADP inhibited state in membrane detached V1. However, how H fulfills these two functions is poorly understood. To characterize the H-V1 interaction and its role in reversible disassembly, we determined binding affinities of full length H and its N-terminal domain (HNT) for an isolated heterodimer of subunits E and G (EG), the N-terminal domain of subunit a (aNT), and V1 lacking subunit H (V1ΔH). Using isothermal titration calorimetry (ITC) and biolayer interferometry (BLI), we show that HNT binds EG with moderate affinity, that full length H binds aNT weakly, and that both H and HNT bind V1ΔH with high affinity. We also found that only one molecule of HNT binds V1ΔH with high affinity, suggesting conformational asymmetry of the three EG heterodimers in V1ΔH. Moreover, MgATP hydrolysis-driven conformational changes in V1 destabilized the interaction of H, or HNT, with V1ΔH, suggesting an interplay between MgADP inhibition and subunit H. Our observation that H binding is affected by MgATP hydrolysis in V1 points to H's role in the mechanism of reversible disassembly. Published under license by The American Society for Biochemistry and Molecular Biology, Inc.

  3. Authorized Limits for the Release of a 25 Ton Locomotive, Serial Number 21547, at the Area 25 Engine Maintenance, Assembly, and Disassembly Facility, Nevada Test Site, Nevada

    International Nuclear Information System (INIS)

    Gwin, Jeremy; Frenette, Douglas

    2010-01-01

    This document contains process knowledge and radiological data and analysis to support approval for release of the 25-ton locomotive, Serial Number 21547, at the Area 25 Engine Maintenance, Assembly, and Disassembly (EMAD) Facility, located on the Nevada Test Site (NTS). The 25-ton locomotive is a small, one-of-a-kind locomotive used to move railcars in support of the Nuclear Engine for Rocket Vehicle Application project. This locomotive was identified as having significant historical value by the Nevada State Railroad Museum in Boulder City, Nevada, where it will be used as a display piece. A substantial effort to characterize the radiological conditions of the locomotive was undertaken by the NTS Management and Operations Contractor, National Security Technologies, LLC (NSTec). During this characterization process, seven small areas on the locomotive had contamination levels that exceeded the NTS release criteria (limits consistent with U.S. Department of Energy (DOE) Order DOE O 5400.5, 'Radiation Protection of the Public and the Environment'). The decision was made to perform radiological decontamination of these known accessible impacted areas to further the release process. On February 9, 2010, NSTec personnel completed decontamination of these seven areas to within the NTS release criteria. Although all accessible areas of the locomotive had been successfully decontaminated to within NTS release criteria, it was plausible that inaccessible areas of the locomotive (i.e., those areas on the locomotive where it was not possible to perform radiological surveys) could potentially have contamination above unrestricted release limits. To access the majority of these inaccessible areas, the locomotive would have to be disassembled. A complete disassembly for a full radiological survey could have permanently destroyed parts and would have ruined the historical value of the locomotive. Complete disassembly would also add an unreasonable financial burden for the

  4. Advance on the technology of assembly and disassembly of a head frame with four legs and the machine-assembled head frame

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Youzong; Cao Baozhen [Ministry of Coal Industry (China). Geological Exploration Machinery Factory

    1996-12-31

    According to the meditation of assembling headframes from upper to lower instead of that from lower to upper, the authors created successfully a new type of machine for assembling and disassembling headframes as well as a type of machine-assembled headframe. The new type of headframe not only has the merits of old type of headframe with four legs, but also can keep people away from dangers of working in high space and save the workers much labour. The new technology has good effect on raising productive efficiency. 2 figs.

  5. Disassembly and reassembly of human papillomavirus virus-like particles produces more virion-like antibody reactivity

    Directory of Open Access Journals (Sweden)

    Zhao Qinjian

    2012-02-01

    Full Text Available Abstract Background Human papillomavirus (HPV vaccines based on major capsid protein L1 are licensed in over 100 countries to prevent HPV infections. The yeast-derived recombinant quadrivalent HPV L1 vaccine, GARDASIL(R, has played an important role in reducing cancer and genital warts since its introduction in 2006. The L1 proteins self-assemble into virus-like particles (VLPs. Results VLPs were subjected to post-purification disassembly and reassembly (D/R treatment during bioprocessing to improve VLP immunoreactivity and stability. The post-D/R HPV16 VLPs and their complex with H16.V5 neutralizing antibody Fab fragments were visualized by cryo electron microscopy, showing VLPs densely decorated with antibody. Along with structural improvements, post-D/R VLPs showed markedly higher antigenicity to conformational and neutralizing monoclonal antibodies (mAbs H16.V5, H16.E70 and H263.A2, whereas binding to mAbs recognizing linear epitopes (H16.J4, H16.O7, and H16.H5 was greatly reduced. Strikingly, post-D/R VLPs showed no detectable binding to H16.H5, indicating that the H16.H5 epitope is not accessible in fully assembled VLPs. An atomic homology model of the entire HPV16 VLP was generated based on previously determined high-resolution structures of bovine papillomavirus and HPV16 L1 pentameric capsomeres. Conclusions D/R treatment of HPV16 L1 VLPs produces more homogeneous VLPs with more virion-like antibody reactivity. These effects can be attributed to a combination of more complete and regular assembly of the VLPs, better folding of L1, reduced non-specific disulfide-mediated aggregation and increased stability of the VLPs. Markedly different antigenicity of HPV16 VLPs was observed upon D/R treatment with a panel of monoclonal antibodies targeting neutralization sensitive epitopes. Multiple epitope-specific assays with a panel of mAbs with different properties and epitopes are required to gain a better understanding of the immunochemical

  6. LRRK2 phosphorylates pre-synaptic N-ethylmaleimide sensitive fusion (NSF) protein enhancing its ATPase activity and SNARE complex disassembling rate.

    Science.gov (United States)

    Belluzzi, Elisa; Gonnelli, Adriano; Cirnaru, Maria-Daniela; Marte, Antonella; Plotegher, Nicoletta; Russo, Isabella; Civiero, Laura; Cogo, Susanna; Carrion, Maria Perèz; Franchin, Cinzia; Arrigoni, Giorgio; Beltramini, Mariano; Bubacco, Luigi; Onofri, Franco; Piccoli, Giovanni; Greggio, Elisa

    2016-01-13

    Lrrk2, a gene linked to Parkinson's disease, encodes a large scaffolding protein with kinase and GTPase activities implicated in vesicle and cytoskeletal-related processes. At the presynaptic site, LRRK2 associates with synaptic vesicles through interaction with a panel of presynaptic proteins. Here, we show that LRRK2 kinase activity influences the dynamics of synaptic vesicle fusion. We therefore investigated whether LRRK2 phosphorylates component(s) of the exo/endocytosis machinery. We have previously observed that LRRK2 interacts with NSF, a hexameric AAA+ ATPase that couples ATP hydrolysis to the disassembling of SNARE proteins allowing them to enter another fusion cycle during synaptic exocytosis. Here, we demonstrate that NSF is a substrate of LRRK2 kinase activity. LRRK2 phosphorylates full-length NSF at threonine 645 in the ATP binding pocket of D2 domain. Functionally, NSF phosphorylated by LRRK2 displays enhanced ATPase activity and increased rate of SNARE complex disassembling. Substitution of threonine 645 with alanine abrogates LRRK2-mediated increased ATPase activity. Given that the most common Parkinson's disease LRRK2 G2019S mutation displays increased kinase activity, our results suggest that mutant LRRK2 may impair synaptic vesicle dynamics via aberrant phosphorylation of NSF.

  7. Streamlined Approach for Environmental Restoration Plan for Corrective Action Unit 113: Reactor Maintenance, Assembly, and Disassembly Building Nevada Test Site, Nevada

    International Nuclear Information System (INIS)

    Smith, J. L.

    2001-01-01

    This Streamlined Approach for Environmental Restoration (SAFER) Plan addresses the action necessary for the closure in place of Corrective Action Unit (CAU) 113 Area 25 Reactor Maintenance, Assembly, and Disassembly Facility (R-MAD). CAU 113 is currently listed in Appendix III of the Federal Facility Agreement and Consent Order (FFACO) (NDEP, 1996). The CAU is located in Area 25 of the Nevada Test Site (NTS) and consists of Corrective Action Site (CAS) 25-04-01, R-MAD Facility (Figures 1-2). This plan provides the methodology for closure in place of CAU 113. The site contains radiologically impacted and hazardous material. Based on preassessment field work, there is sufficient process knowledge to close in place CAU 113 using the SAFER process. At a future date when funding becomes available, the R-MAD Building (25-3110) will be demolished and inaccessible radiologic waste will be properly disposed in the Area 3 Radiological Waste Management Site (RWMS)

  8. Streamlined Approach for Environmental Restoration Plan for Corrective Action Unit 113: Reactor Maintenance, Assembly, and Disassembly Building Nevada Test Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    J. L. Smith

    2001-01-01

    This Streamlined Approach for Environmental Restoration (SAFER) Plan addresses the action necessary for the closure in place of Corrective Action Unit (CAU) 113 Area 25 Reactor Maintenance, Assembly, and Disassembly Facility (R-MAD). CAU 113 is currently listed in Appendix III of the Federal Facility Agreement and Consent Order (FFACO) (NDEP, 1996). The CAU is located in Area 25 of the Nevada Test Site (NTS) and consists of Corrective Action Site (CAS) 25-04-01, R-MAD Facility (Figures 1-2). This plan provides the methodology for closure in place of CAU 113. The site contains radiologically impacted and hazardous material. Based on preassessment field work, there is sufficient process knowledge to close in place CAU 113 using the SAFER process. At a future date when funding becomes available, the R-MAD Building (25-3110) will be demolished and inaccessible radiologic waste will be properly disposed in the Area 3 Radiological Waste Management Site (RWMS).

  9. Improvement of the in vivo cellular repopulation of decellularized cardiovascular tissues by a detergent-free, non-proteolytic, actin-disassembling regimen.

    Science.gov (United States)

    Assmann, Alexander; Struß, Marc; Schiffer, Franziska; Heidelberg, Friederike; Munakata, Hiroshi; Timchenko, Elena V; Timchenko, Pavel E; Kaufmann, Tim; Huynh, Khon; Sugimura, Yukiharu; Leidl, Quentin; Pinto, Antonio; Stoldt, Volker R; Lichtenberg, Artur; Akhyari, Payam

    2017-12-01

    Low immunogenicity and high repopulation capacity are crucial determinants for the functional and structural performance of acellular cardiovascular implants. The present study evaluates a detergent-free, non-proteolytic, actin-disassembling regimen (BIO) for decellularization of heart valve and vessel grafts, particularly focusing on their bio-functionality. Rat aortic conduits (rAoC; n = 89) and porcine aortic valve samples (n = 106) are decellularized using detergents (group DET) or the BIO regimen. BIO decellularization results in effective elimination of cellular proteins and significantly improves removal of DNA as compared with group DET, while the extracellular matrix (ECM) structure as well as mechanical properties are preserved. The architecture of rAoC in group BIO allows for improved bio-functionalization with fibronectin (FN) in a standardized rat implantation model: BIO treatment significantly increases speed and amount of autologous medial cellular repopulation in vivo (p < 0.001) and decreases the formation of hyperplastic intima (p < 0.001) as compared with FN-coated DET-decellularized grafts. Moreover, there are no signs of infiltration with inflammatory cells. The present biological, detergent-free, non-proteolytic regimen balances effective decellularization and ECM preservation in cardiovascular grafts, and provides optimized bio-functionality. Additionally, this study implies that the actin-disassembling regimen may be a promising approach for bioengineering of acellular scaffolds from other muscular tissues, as for example myocardium or intestine. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  10. Protein dynamics of human RPA and RAD51 on ssDNA during assembly and disassembly of the RAD51 filament.

    Science.gov (United States)

    Ma, Chu Jian; Gibb, Bryan; Kwon, YoungHo; Sung, Patrick; Greene, Eric C

    2017-01-25

    Homologous recombination (HR) is a crucial pathway for double-stranded DNA break (DSB) repair. During the early stages of HR, the newly generated DSB ends are processed to yield long single-stranded DNA (ssDNA) overhangs, which are quickly bound by replication protein A (RPA). RPA is then replaced by the DNA recombinase Rad51, which forms extended helical filaments on the ssDNA. The resulting nucleoprotein filament, known as the presynaptic complex, is responsible for pairing the ssDNA with homologous double-stranded DNA (dsDNA), which serves as the template to guide DSB repair. Here, we use single-molecule imaging to visualize the interplay between human RPA (hRPA) and human RAD51 during presynaptic complex assembly and disassembly. We demonstrate that ssDNA-bound hRPA can undergo facilitated exchange, enabling hRPA to undergo rapid exchange between free and ssDNA-bound states only when free hRPA is present in solution. Our results also indicate that the presence of free hRPA inhibits RAD51 filament nucleation, but has a lesser impact upon filament elongation. This finding suggests that hRPA exerts important regulatory influence over RAD51 and may in turn affect the properties of the assembled RAD51 filament. These experiments provide an important basis for further investigations into the regulation of human presynaptic complex assembly. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  11. Inositol hexakisphosphate kinase-1 mediates assembly/disassembly of the CRL4–signalosome complex to regulate DNA repair and cell death

    Science.gov (United States)

    Rao, Feng; Xu, Jing; Khan, A. Basit; Gadalla, Moataz M.; Cha, Jiyoung Y.; Xu, Risheng; Tyagi, Richa; Dang, Yongjun; Chakraborty, Anutosh; Snyder, Solomon H.

    2014-01-01

    Inositol polyphosphates containing an energetic pyrophosphate bond are formed primarily by a family of three inositol hexakisphosphate (IP6) kinases (IP6K1–3). The Cullin-RING ubiquitin ligases (CRLs) regulate diverse biological processes through substrate ubiquitylation. CRL4, comprising the scaffold Cullin 4A/B, the E2-interacting Roc1/2, and the adaptor protein damage-specific DNA-binding protein 1, is activated by DNA damage. Basal CRL4 activity is inhibited by binding to the COP9 signalosome (CSN). UV radiation and other stressors dissociate the complex, leading to E3 ligase activation, but signaling events that trigger signalosome dissociation from CRL4 have been unclear. In the present study, we show that, under basal conditions, IP6K1 forms a ternary complex with CSN and CRL4 in which IP6K1 and CRL4 are inactive. UV dissociates IP6K1 to generate IP7, which then dissociates CSN–CRL4 to activate CRL4. Thus, IP6K1 is a novel CRL4 subunit that transduces UV signals to mediate disassembly of the CRL4–CSN complex, thereby regulating nucleotide excision repair and cell death. PMID:25349427

  12. Determination of C0-60 in Cobalt Slugs and Slabs and Radionuclides in Curium Sampler Slugs L-Reactor Disassembly Basin

    International Nuclear Information System (INIS)

    Casella, V.R.

    2004-01-01

    Co-60 was historically produced in the SRS reactors. Cobalt slugs were irradiated in the early 1970s. Post-production, remaining cobalt slugs (including slab form) were consolidated for storage. There are approximately nine hundred cobalt slugs currently stored awaiting final disposition. These slugs had historically incomplete documentation for activity rates; therefore, assaying was required in order to determine their activity levels. Since the gamma dose rate from these slugs is extremely high, the most cost effective way to shield a source of this magnitude from personnel and the radiation detector was to use the basin water in which the slugs are stored as the shield. A sodium iodide gamma detector was placed above a specially designed air collimator assembly, so that slug was at least eight feet from the detector and was shielded by the basin water. Using a sodium iodide detector and multichannel analyzer system and an underwater collimator assembly, Co-60 concentrations we re determined for Disassembly Basin cobalt slugs and slabs and 18 curium sampler slugs. The total activity of all of the assayed slugs summed to 31,783 curies. From the Co-60 concentrations of the curium sampler slugs, the irradiation flux was determined for the known irradiation time. The amounts of Pu-238, 239, 240, 241, 242; Am-241, 243; and Cm-242, 244 produced were then obtained based on the original amount of Pu-239 irradiated

  13. The yeast protein kinase Sch9 adjusts V-ATPase assembly/disassembly to control pH homeostasis and longevity in response to glucose availability.

    Directory of Open Access Journals (Sweden)

    Tobias Wilms

    2017-06-01

    Full Text Available The conserved protein kinase Sch9 is a central player in the nutrient-induced signaling network in yeast, although only few of its direct substrates are known. We now provide evidence that Sch9 controls the vacuolar proton pump (V-ATPase to maintain cellular pH homeostasis and ageing. A synthetic sick phenotype arises when deletion of SCH9 is combined with a dysfunctional V-ATPase, and the lack of Sch9 has a significant impact on cytosolic pH (pHc homeostasis. Sch9 physically interacts with, and influences glucose-dependent assembly/disassembly of the V-ATPase, thereby integrating input from TORC1. Moreover, we show that the role of Sch9 in regulating ageing is tightly connected with V-ATPase activity and vacuolar acidity. As both Sch9 and the V-ATPase are highly conserved in higher eukaryotes, it will be interesting to further clarify their cooperative action on the cellular processes that influence growth and ageing.

  14. HUWE1 Ubiquitylates and Degrades the RAC Activator TIAM1 Promoting Cell-Cell Adhesion Disassembly, Migration, and Invasion

    Directory of Open Access Journals (Sweden)

    Lynsey Vaughan

    2015-01-01

    Full Text Available The E3 ubiquitin ligase HUWE1, deregulated in carcinoma, has been implicated in tumor formation. Here, we uncover a role for HUWE1 in cell migration and invasion through degrading the RAC activator TIAM1, implying an additional function in malignant progression. In MDCKII cells in response to HGF, HUWE1 catalyzes TIAM1 ubiquitylation and degradation predominantly at cell-cell adhesions, facilitating junction disassembly, migration, and invasion. Depleting HUWE1 or mutating the TIAM1 ubiquitylation site prevents TIAM1 degradation, antagonizing scattering, and invasion. Moreover, simultaneous depletion of TIAM1 restores migration and invasion in HUWE1-depleted cells. Significantly, we show that HUWE1 stimulates human lung cancer cell invasion through regulating TIAM1 stability. Finally, we demonstrate that HUWE1 and TIAM1 protein levels are inversely correlated in human lung carcinomas. Thus, we elucidate a critical role for HUWE1 in regulating epithelial cell-cell adhesion and provide additional evidence that ubiquitylation contributes to spatiotemporal control of RAC.

  15. Rab5 GTPase controls chromosome alignment through Lamin disassembly and relocation of the NuMA-like protein Mud to the poles during mitosis

    Science.gov (United States)

    Capalbo, Luisa; D'Avino, Pier Paolo; Archambault, Vincent; Glover, David M.

    2011-01-01

    The small GTPase Rab5 is a conserved regulator of membrane trafficking; it regulates the formation of early endosomes, their transport along microtubules, and the fusion to the target organelles. Although several members of the endocytic pathway were recently implicated in spindle organization, it is unclear whether Rab5 has any role during mitosis. Here, we describe that Rab5 is required for proper chromosome alignment during Drosophila mitoses. We also found that Rab5 associated in vivo with nuclear Lamin and mushroom body defect (Mud), the Drosophila counterpart of nuclear mitotic apparatus protein (NuMA). Consistent with this finding, Rab5 was required for the disassembly of the nuclear envelope at mitotic entry and the accumulation of Mud at the spindle poles. Furthermore, Mud depletion caused chromosome misalignment defects that resembled the defects of Rab5 RNAi cells, and double-knockdown experiments indicated that the two proteins function in a linear pathway. Our results indicate a role for Rab5 in mitosis and reinforce the emerging view of the contributions made by cell membrane dynamics to spindle function. PMID:21987826

  16. Disassembly of an arch bridge deformed due to landslide activity and the replacement of a new bridge in the same site. Jisuberi ni yori henkei shita arch bashi no kaitai to shinbashi no kakekae

    Energy Technology Data Exchange (ETDEWEB)

    Sano, S; Morimoto, C; Tomoda, T; Mizukawa, Y; Onushi, M; Ito, T [Kawasaki Heavy Industries, Ltd., Tokyo (Japan)

    1991-10-20

    This report describes the replacement process of an arch bridge deformed due to landslide activity, selection and contents of the disassembly method, and configuration of the new bridge and its design method. The Ryugu Bridge had been damaged by landslides over an extended period. It was a deck arch bridge having originally a span of 74 meters, but it had shortened by 424 mm due to landslide activity during 14 years since its completion. Then it was decided to be replaced by a new bridge having an adjustable structure to support the movement of its abutments. As disassembly of the deformed arch bridge could be dangerous, the best methodology was studied, and the disassembly was carried out by the cable method. The new bridge had box-girder parts in both side of the main truss, so as to be adjustable to the change of the span length, and the bridge was designed for a working life of 50 years if the bearing supports and expansion joints were reset every 10 years. Concerning the connecting parts between the box-girder and the main truss, appropriateness of the sectional configuration was verified by FEM analysis. 9 refs., 18 figs., 2 tab.

  17. New findings on the onset of thermal disassembly in spallation reactions; Nouvelles approches pour l'etude de la multifragmentation thermique dans la spallation

    Energy Technology Data Exchange (ETDEWEB)

    Napolitani, P

    2004-09-15

    Thermal multifragmentation is the process of multi body disassembly of a hot nucleus when the excitation is almost purely thermal i.e. dynamical effects like compression (characteristic of ion-ion collisions at Fermi energy) are negligible. Suited reactions are proton induced collision or ion-ion abrasion at relativistic incident energy. Thus we measured four systems at FRS (Fragment separator, GSI, Darmstadt) in inverse kinematics: Fe{sup 56}+p, Fe{sup 56}+Ti(nat), Xe{sup 136}+p, Xe{sup 136}+Ti(nat) a 1 A*GeV. The inverse kinematics allows to observe all particles without any threshold in energy. This is a great advantage compared to experiments in direct kinematics, because only in inverse kinematics it is possible to obtain complete velocity spectra (without a hole for low velocities) for fully identified isotopes. The complex shape of the velocity spectra allows to identify the different deexcitation channels and it clearly shows the transition from a chaotic-dominated process (Gaussian cloud in velocity space) to a direct Coulomb- (or eventually expansion-) dominated process (shell of a sphere in velocity space). Different possible descriptions of the reaction process are discussed, based either on asymmetric fission or multifragmentation. The resulting physical picture is especially interesting for the Fe{sup 56}+p, and Xe{sup 136}+p systems: proton induced collisions could result in the split of the system in two or more fragments due to a fast break-up process. In this case, the configuration of the break-up partition is very asymmetric. The discussion will be extended to other characteristics, like the restoring of nuclear structure features in the isotopic production and the temperature dependence of the isotopic composition of the residues. (author)

  18. Secretome profiling of oral squamous cell carcinoma-associated fibroblasts reveals organization and disassembly of extracellular matrix and collagen metabolic process signatures.

    Science.gov (United States)

    Bagordakis, Elizabete; Sawazaki-Calone, Iris; Macedo, Carolina Carneiro Soares; Carnielli, Carolina M; de Oliveira, Carine Ervolino; Rodrigues, Priscila Campioni; Rangel, Ana Lucia C A; Dos Santos, Jean Nunes; Risteli, Juha; Graner, Edgard; Salo, Tuula; Paes Leme, Adriana Franco; Coletta, Ricardo D

    2016-07-01

    An important role has been attributed to cancer-associated fibroblasts (CAFs) in the tumorigenesis of oral squamous cell carcinoma (OSCC), the most common tumor of the oral cavity. Previous studies demonstrated that CAF-secreted molecules promote the proliferation and invasion of OSCC cells, inducing a more aggressive phenotype. In this study, we searched for differences in the secretome of CAFs and normal oral fibroblasts (NOF) using mass spectrometry-based proteomics and biological network analysis. Comparison of the secretome profiles revealed that upregulated proteins involved mainly in extracellular matrix organization and disassembly and collagen metabolism. Among the upregulated proteins were fibronectin type III domain-containing 1 (FNDC1), serpin peptidase inhibitor type 1 (SERPINE1), and stanniocalcin 2 (STC2), the upregulation of which was validated by quantitative PCR and ELISA in an independent set of CAF cell lines. The transition of transforming growth factor beta 1 (TGF-β1)-mediating NOFs into CAFs was accompanied by significant upregulation of FNDC1, SERPINE1, and STC2, confirming the participation of these proteins in the CAF-derived secretome. Type I collagen, the main constituent of the connective tissue, was also associated with several upregulated biological processes. The immunoexpression of type I collagen N-terminal propeptide (PINP) was significantly correlated in vivo with CAFs in the tumor front and was associated with significantly shortened survival of OSCC patients. Presence of CAFs in the tumor stroma was also an independent prognostic factor for OSCC disease-free survival. These results demonstrate the value of secretome profiling for evaluating the role of CAFs in the tumor microenvironment and identify potential novel therapeutic targets such as FNDC1, SERPINE1, and STC2. Furthermore, type I collagen expression by CAFs, represented by PINP levels, may be a prognostic marker of OSCC outcome.

  19. Habitat Fragmentation Drives Plant Community Assembly Processes across Life Stages

    Science.gov (United States)

    Hu, Guang; Feeley, Kenneth J.; Yu, Mingjian

    2016-01-01

    Habitat fragmentation is one of the principal causes of biodiversity loss and hence understanding its impacts on community assembly and disassembly is an important topic in ecology. We studied the relationships between fragmentation and community assembly processes in the land-bridge island system of Thousand Island Lake in East China. We focused on the changes in species diversity and phylogenetic diversity that occurred between life stages of woody plants growing on these islands. The observed diversities were compared with the expected diversities from random null models to characterize assembly processes. Regression tree analysis was used to illustrate the relationships between island attributes and community assembly processes. We found that different assembly processes predominate in the seedlings-to-saplings life-stage transition (SS) vs. the saplings-to-trees transition (ST). Island area was the main attribute driving the assembly process in SS. In ST, island isolation was more important. Within a fragmented landscape, the factors driving community assembly processes were found to differ between life stage transitions. Environmental filtering had a strong effect on the seedlings-to-saplings life-stage transition. Habitat isolation and dispersal limitation influenced all plant life stages, but had a weaker effect on communities than area. These findings add to our understanding of the processes driving community assembly and species coexistence in the context of pervasive and widespread habitat loss and fragmentation. PMID:27427960

  20. Development of an advanced, continuous mild-gasification process for the production of coproducts. Report for Task 4.8, Decontamination and disassembly of the mild-gasification and char-to-carbon PRUs and disposal of products from testing

    Energy Technology Data Exchange (ETDEWEB)

    Merriam, N.W. [Western Research Inst., Laramie, WY (United States); Jha, Mahesh C. [AMAX Research and Development Center, Golden, CO (United States)

    1991-11-01

    This report contains descriptions of mild-gasification and char-to-carbon process research units (PRUS) used by WRI and AMAX R&D Center to conduct tests under contract AC21-87MC24268. Descriptions of materials produced during those tests are also contained herein. Western Research Institute proposes to dispose of remaining fines and dried coal by combustion and remaining coal liquids by incineration during mid-1992. The mild-gasification PRU will be used for additional tests until 1993, at which time WRI proposes to decontaminate and disassemble the PRU. AMAX R&D Center intends to return the spent char, any remaining feed char, and unusable product carbon to the Eagle Butte Mine near Gillette, Wyoming, from where the coal originally came. The solid products will be added to the mine`s coal product stream. Coal liquids collected from condensers will be concentrated and sent to a local oil and solvent recycling company where the liquids will be burned as fuel. The char-to-carbon PRU will be operated periodically until 1993 when the plant will be decontaminated and disassembled.

  1. Community Economics

    OpenAIRE

    武藤, 宣道; Nobumichi, MUTOH

    2000-01-01

    This paper examines the new field of community economics with respect to Japan. A number of studies in community economics have already been produced in OECD countries including the United States. Although these are of great interest, each country has its own historical, socioeconomic context and must therefore develop its own approach to community economics. Community-oriented economics is neither macro-nor micro-economics in the standard economics textbook sense. Most community economics st...

  2. Community relations

    International Nuclear Information System (INIS)

    O'Neil, C.

    1997-01-01

    The interaction of the oil and gas companies with the Northern communities regarding drilling activities was an important aspect of oil and gas operations conducted in the Beaufort Sea. During the 1960s the industry and aboriginal people basically ignored each other. Later, the industry put more emphasis on community consultation until finally two-way communication was established. Respect for the land and the environment were very important to aboriginal people who depended on the land and its resources for their traditional way of life. Community relations policies by the various companies involved in the area, and the impact they have had on their respective communities were recounted. Not all efforts were successful, however, the companies and the communities learned from their experiences, and by the time operations ceased, the communities seemed to be more appreciative of the ways they were being treated by the oil companies. 22 figs

  3. Claiming Community

    DEFF Research Database (Denmark)

    Jensen, Steffen Bo

    As its point of departure this working paper takes the multitude of different uses and meanings of the concept of community in local politics in Cape Town. Instead of attempting to define it in substantive terms, the paper takes a social constructivist approach to the study of community...... is termed community work. First, the paper explores how community has become a governmental strategy, employed by the apartheid regime as well, although in different ways, as post-apartheid local government. Secondly, the paper explores the ways in which community becomes the means in which local residents...... lay claim on the state, as well as how it enters into local power struggles between different political groups within the township. In the third part, the paper explores how the meanings of community and the struggles to realise it have changed as South Africa, nationally and locally, has become...

  4. Biclique communities

    DEFF Research Database (Denmark)

    Jørgensen, Sune Lehmann; Hansen-Schwartz, Martin; Hansen, Lars Kai

    2008-01-01

    We present a method for detecting communities in bipartite networks. Based on an extension of the k-clique community detection algorithm, we demonstrate how modular structure in bipartite networks presents itself as overlapping bicliques. If bipartite information is available, the biclique...... community detection algorithm retains all of the advantages of the k-clique algorithm, but avoids discarding important structural information when performing a one-mode projection of the network. Further, the biclique community detection algorithm provides a level of flexibility by incorporating independent...

  5. [Community Nutrition].

    Science.gov (United States)

    Aranceta, Javier

    2004-06-01

    In the last 20 years, Public Health Nutrition focused mainly on the qualitative aspects which may influence the onset of chronic diseases, quality of life, physical and mental performance and life expectancy. This applied knowledge organised as part of preventive and health promotion programs led to the development of Community Nutrition. The aim of Community Nutrition actions is to adequate lifestyles related to food consumption patterns in order to improve the quality of life and contribute to health promotion of the population in the community where programs and services are delivered. Key functions to develop in a Community Nutrition Unit consist in the identification and assessment of nutrition problems in the community as well as the design, implementation and evaluation of intervention programs by means of appropriate strategies. These should aim at different populations groups and settings, such as work places, schools, high risk groups or the general public. Nowadays, Community Nutrition work efforts should focus on three main aspects: nutrition education in schools and in the community; food safety and food security and the development and reinforcement of food preparation skills across all age groups. Social catering services, either in schools, the work place or at the community level, need to ensure adequate nutritional supply, provide foods contributing to healthy eating practices as well as to enhance culinary traditions and social learning. Food safety and food security have become a top priority in Public Health. The concepts referes to the availability of food safe and adequate as well as in sufficient amount in order to satisfy nutrition requirements of all individuals in the community. Social changes along new scientific developments will introduce new demands in Community Nutrition work and individual dietary counselling will become a key strategy. In order to face new challenges, community nutrition pactitioners require a high quality

  6. Community noise

    Science.gov (United States)

    Bragdon, C. R.

    Airport and community land use planning as they relate to airport noise reduction are discussed. Legislation, community relations, and the physiological effect of airport noise are considered. Noise at the Logan, Los Angeles, and Minneapolis/St. Paul airports is discussed.

  7. Community Drive

    DEFF Research Database (Denmark)

    Magnussen, Rikke

    2018-01-01

    Schools and educational institutions are challenged by not adequately educating students for independent knowledge collaboration and solving of complex societal challenges (Bundsgaard & Hansen, 2016; Slot et al., 2017). As an alternative strategy to formal learning has Community-driven research...... opportunity to break boundaries between research institutions and surrounding communities through the involvement of new types of actors, knowledge forms and institutions (OECD, 2011). This paper presents the project Community Drive a three year cross disciplinary community-driven game– and data-based project....... In the paper we present how the project Community Drive initiated in May 2018 is based on results from pilot projects conducted from 2014 – 2017. Overall these studies showed that it is a strong motivational factor for students to be given the task to change their living conditions through redesign...

  8. Community Ecology

    CERN Document Server

    1988-01-01

    This book presents the proceedings of a workshop on community ecology organized at Davis, in April, 1986, sponsored by the Sloan Foundation. There have been several recent symposia on community ecology (Strong et. al., 1984, Diamond and Case, 1987) which have covered a wide range of topics. The goal of the workshop at Davis was more narrow: to explore the role of scale in developing a theoretical approach to understanding communities. There are a number of aspects of scale that enter into attempts to understand ecological communities. One of the most basic is organizational scale. Should community ecology proceed by building up from population biology? This question and its ramifications are stressed throughout the book and explored in the first chapter by Simon Levin. Notions of scale have long been important in understanding physical systems. Thus, in understanding the interactions of organisms with their physical environment, questions of scale become paramount. These more physical questions illustrate the...

  9. European Community.

    Science.gov (United States)

    1987-05-01

    The European Community was established in 1951 to reconcile France and Germany after World War II and to make possible the eventual federation of Europe. By 1986, there were 12 member countries: France, Italy, Belgium, the Federal Republic of Germany, Luxembourg, the Netherlands, Denmark, Ireland, the United Kingdom, Greece, Spain, and Portugal. Principal areas of concern are internal and external trade, agriculture, monetary coordination, fisheries, common industrial and commercial policies, assistance, science and research, and common social and regional policies. The European Community has a budget of US$34.035 billion/year, funded by customs duties and 1.4% of each member's value-added tax. The treaties establishing the European Community call for members to form a common market, a common customs tariff, and common agricultural, transport, economic, and nuclear policies. Major European Community institutions include the Commission, Council of Ministers, European Parliament, Court of Justice, and Economic and Social Committee. The Community is the world's largest trading unit, accounting for 15% of world trade. The 2 main goals of the Community's industrial policy are to create an open internal market and to promote technological innovation in order to improve international competitiveness. The European Community aims to contribute to the economic and social development of Third World countries as well.

  10. Natural Communities

    Data.gov (United States)

    Kansas Data Access and Support Center — This dataset shows the locations of known tracts of high quality natural communities in Kansas, generalized to the PLSS section. It is not a compehensive dataset of...

  11. COMMUNITY OPHTHALMOLOGY

    African Journals Online (AJOL)

    2016-11-04

    Nov 4, 2016 ... The Role of Research in Social Marketing: The Community Eye. Outreach Clinic .... Serious thought was given to the possibility of establishing static eye care .... Information obtained included vital statistics, work history, job.

  12. Community concepts.

    Science.gov (United States)

    Yeung, Thomas; Bates, Tony

    2004-03-01

    Since the publication of "Sustainable Communities--building for the future", Government attention has focused largely on high-density affordable housing in the four "growth areas": Thames Gateway; Ashford; Milton Keynes--South Midlands, and London--Stansted--Cambridge. In this article, Thomas Yeung and Tony Bates suggest that a greater and more sustainable impact would be achieved if architects, planners, and developers considered the potential for community-based water and waste management and on-site energy generation and distribution right from the start of the project. In particular, they consider that the communal nature of hospitals, universities, and public/community housing provides a great opportunity for on-site renewable CHP and/or distributed heating, which could combine global environmental benefits with improved local amenities. They describe a simple model for prioritising energy management in the built environment, and draw on lessons learnt at ETRCL in Dagenham and BedZED in Surrey to offer a few recommendations for Government and developers. Tony Bates is the business development manager for Scott Wilson in the South East and is responsible for the promotion of sustainable communities through relationships with architects, developers, land owners and local authorities. Thomas Yeung leads the Energy Infrastructure Technologies group in Scott Wilson. This team offers an integrated approach to clean community-based energy generation, energy management, waste and water management, sustainable transport, and sustainable buildings/communities.

  13. Community expectations

    International Nuclear Information System (INIS)

    Kraemer, L.

    2004-01-01

    Historically, the relationship between the nuclear generator and the local community has been one of stability and co-operation. However in more recent times (2000-2003) the nuclear landscape has had several major issues that directly effect the local nuclear host communities. - The associations mandate is to be supportive of the nuclear industry through ongoing dialogue, mutual cooperation and education, - To strengthen community representation with the nuclear industry and politically through networking with other nuclear host communities. As a result of these issues, the Mayors of a number of communities started having informal meetings to discuss the issues at hand and how they effect their constituents. These meetings led to the official formation of the CANHC with representation from: In Canada it is almost impossible to discuss decommissioning and dismantling of Nuclear Facilities without also discussing Nuclear Waste disposal for reasons that I will soon make clear. Also I would like to briefly touch on how and why expectation of communities may differ by geography and circumstance. (author)

  14. Designed communities?

    DEFF Research Database (Denmark)

    Stender, Marie

    2013-01-01

    In current residential spaces there seem to be an increasing emphasis on small-scale communities. A number of new, high profiled residential complexes thus seek to promote new ways of social living by rethinking architectural design, typologies and concepts. In this paper I explore the emergence ...

  15. Walkable Communities

    Centers for Disease Control (CDC) Podcasts

    2008-04-18

    This podcast is for a general audience and discusses the benefits of walkable communities, as they relate to health, the environment, and social interaction.  Created: 4/18/2008 by National Center for Environmental Health (NCEH), ATSDR.   Date Released: 5/8/2008.

  16. Interfirm communities

    DEFF Research Database (Denmark)

    Bergenholtz, Carsten

    2012-01-01

    . These results yield a paradox which the present paper aims to address. Based on an in-depth case study of how a high-tech small firm organizes its interfirm activity, I show how a hybrid social relation, that is neither weak nor strong, is a useful conception for interfirm communities. Hereby, the study also...

  17. Sleep Spindles and Intelligence in Early Childhood--Developmental and Trait-Dependent Aspects

    Science.gov (United States)

    Ujma, Péter P.; Sándor, Piroska; Szakadát, Sára; Gombos, Ferenc; Bódizs, Róbert

    2016-01-01

    Sleep spindles act as a powerful marker of individual differences in cognitive ability. Sleep spindle parameters correlate with both age-related changes in cognitive abilities and with the age-independent concept of IQ. While some studies have specifically demonstrated the relationship between sleep spindles and intelligence in young children, our…

  18. Trait-Dependent Biogeography: (Re)Integrating Biology into Probabilistic Historical Biogeographical Models.

    Science.gov (United States)

    Sukumaran, Jeet; Knowles, L Lacey

    2018-04-20

    The development of process-based probabilistic models for historical biogeography has transformed the field by grounding it in modern statistical hypothesis testing. However, most of these models abstract away biological differences, reducing species to interchangeable lineages. We present here the case for reintegration of biology into probabilistic historical biogeographical models, allowing a broader range of questions about biogeographical processes beyond ancestral range estimation or simple correlation between a trait and a distribution pattern, as well as allowing us to assess how inferences about ancestral ranges themselves might be impacted by differential biological traits. We show how new approaches to inference might cope with the computational challenges resulting from the increased complexity of these trait-based historical biogeographical models. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. Sleep spindles and intelligence in early childhood-developmental and trait-dependent aspects.

    Science.gov (United States)

    Ujma, Péter P; Sándor, Piroska; Szakadát, Sára; Gombos, Ferenc; Bódizs, Róbert

    2016-12-01

    Sleep spindles act as a powerful marker of individual differences in cognitive ability. Sleep spindle parameters correlate with both age-related changes in cognitive abilities and with the age-independent concept of IQ. While some studies have specifically demonstrated the relationship between sleep spindles and intelligence in young children, our previous work in older subjects revealed sex differences in the sleep spindle correlates of IQ, which was never investigated in small children before. We investigated the relationship between age, Raven Colored Progressive Matrices (CPM) scores and sleep spindles in 28 young children (age 4-8 years, 15 girls). We specifically investigated sex differences in the psychometric correlates of sleep spindles. We also aimed to separate the correlates of sleep spindles that are because of age-related maturation from other effects that reflect an age-independent relationship between sleep spindles and general intelligence. Our results revealed a modest positive correlation between fast spindle amplitude and age. Raven CPM scores positively correlated with both slow and fast spindle amplitude, but this effect remained a tendency in males and vanished after correcting for the effects of age. Age-corrected correlations between Raven CPM scores and both slow and fast spindle amplitude were only significant in females. Overall, our results show that in male children sleep spindles are a maturational marker, but in female children they indicate trait-like intelligence, in line with previous studies in adolescent and adult subjects. Thalamocortical white matter connectivity may be the underlying mechanism behind both higher spindle amplitude and higher intelligence in female, but not male subjects. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  20. Community Evolution

    OpenAIRE

    Saganowski, Stanisław; Bródka, Piotr; Kazienko, Przemysław

    2016-01-01

    The continuous interest in the social network area contributes to the fast development of this field. The new possibilities of obtaining and storing data facilitate deeper analysis of the entire social network, extracted social groups and single individuals as well. One of the most interesting research topic is the network dynamics and dynamics of social groups in particular, it means analysis of group evolution over time. It is the natural step forward after social community extraction. Havi...

  1. Online Communities

    DEFF Research Database (Denmark)

    Sørensen, Henrik; Lassen, Astrid Heidemann; Gorm Hansen, Katrine

    ”Online Communities” er et medie for brugere og fagfolk, hvor de kan mødes digitalt for at dele erfaringer, og dette kan anvendes som inspiration indenfor Brugerdreven Innovation. Via ”desk research” kan virksomheder opnå adgang til varierende mængder af brugere på en forholdsvist enkelt måde. I...... denne rapport beskrives eksperimentets opbygning, resultater og mulige værdi. Vi håber hermed på at kunne give praktisk indsigt i, hvorledes virksomheder fra byggematerialeindustrien kan agere i online communities....

  2. Disassembling archeology, reassembling the modern world.

    Science.gov (United States)

    Carruthers, William; Van Damme, Stéphane

    2017-09-01

    This article provides a substantive discussion of the relevance of the history of archeology to the history of science. At the same time, the article introduces the papers contained in this special issue as exemplars of this relevance. To make its case, the article moves through various themes in the history of archeology that overlap with key issues in the history of science. The article discusses the role and tension of regimes of science in antiquarian and archeological practices, and also considers issues of scale and place, particularly in relation to the field. Additionally, the piece attends to issues of professionalization and the constitution of an archeological public, at the same time as discussing issues of empire, colonialism, and the circulation of knowledge. Meanwhile, enriching discussions within and beyond the history of science, the article discusses the history of archeology and its relationship with museums, collecting, and material culture and materiality. Finally, the piece discusses the relationship of the history of archeology with wider discussions about scientific ethics. In conclusion, the article questions whether we should speak of 'the history of archeology' at all.

  3. Developing Learning Communities: Using Communities of Practice within Community Psychology

    Science.gov (United States)

    Lawthom, Rebecca

    2011-01-01

    The idea that communities need to be inclusive is almost axiomatic. The process, whereby, community members engage in inclusive practices is far less understood. Similarly, UK universities are being encouraged to include the wider community and extent campus boundaries. Here, I suggest a particular theoretical lens which sheds light on engagement…

  4. Convergence in mycorrhizal fungal communities due to drought, plant competition, parasitism and susceptibility to herbivory: Consequences for fungi and host plants

    Directory of Open Access Journals (Sweden)

    Catherine A. Gehring

    2014-06-01

    Full Text Available Plants and mycorrhizal fungi influence each other’s abundance, diversity and distribution. How other biotic interactions affect the mycorrhizal symbiosis is less well understood. Likewise, we know little about the effects of climate change on the fungal component of the symbiosis or its function. We synthesized our long-term studies on the influence of mistletoe parasites, insect herbivores, competing trees, and drought on the ectomycorrhizal fungal communities associated with a foundation tree species of the southwestern United States, pinyon pine (Pinus edulis, and described how these changes feed back to affect host plant performance. We found that drought and all three of the biotic interactions studied resulted in similar shifts in ectomycorrhizal fungal community composition, demonstrating a convergence of the community towards dominance by a few closely related fungal taxa. Ectomycorrhizal fungi responded similarly to each of these stressors resulting in a predictable trajectory of community disassembly, consistent with ecological theory. Although we predicted that the fungal communities associated with trees stressed by drought, herbivory, competition, and parasitism would be poor mutualists, we found the opposite pattern in field studies. Our results suggest that climate change and the increased importance of herbivores, competitors and parasites that can be associated with it, may ultimately lead to reductions in ectomycorrhizal fungal diversity, but that the remaining fungal community may be beneficial to host trees under the current climate and the warmer, drier climate predicted for the future.

  5. Convergence in mycorrhizal fungal communities due to drought, plant competition, parasitism, and susceptibility to herbivory: consequences for fungi and host plants.

    Science.gov (United States)

    Gehring, Catherine A; Mueller, Rebecca C; Haskins, Kristin E; Rubow, Tine K; Whitham, Thomas G

    2014-01-01

    Plants and mycorrhizal fungi influence each other's abundance, diversity, and distribution. How other biotic interactions affect the mycorrhizal symbiosis is less well understood. Likewise, we know little about the effects of climate change on the fungal component of the symbiosis or its function. We synthesized our long-term studies on the influence of plant parasites, insect herbivores, competing trees, and drought on the ectomycorrhizal fungal communities associated with a foundation tree species of the southwestern United States, pinyon pine (Pinus edulis), and described how these changes feed back to affect host plant performance. We found that drought and all three of the biotic interactions studied resulted in similar shifts in ectomycorrhizal fungal community composition, demonstrating a convergence of the community towards dominance by a few closely related fungal taxa. Ectomycorrhizal fungi responded similarly to each of these stressors resulting in a predictable trajectory of community disassembly, consistent with ecological theory. Although we predicted that the fungal communities associated with trees stressed by drought, herbivory, competition, and parasitism would be poor mutualists, we found the opposite pattern in field studies. Our results suggest that climate change and the increased importance of herbivores, competitors, and parasites that can be associated with it, may ultimately lead to reductions in ectomycorrhizal fungal diversity, but that the remaining fungal community may be beneficial to host trees under the current climate and the warmer, drier climate predicted for the future.

  6. Community Hospital Telehealth Consortium

    National Research Council Canada - National Science Library

    Williams, Elton

    2004-01-01

    The Community Hospital Telehealth Consortium is a unique, forward-thinking, community-based healthcare service project organized around 5 not-for-profit community hospitals located throughout Louisiana and Mississippi...

  7. Involving the Community

    International Development Research Centre (IDRC) Digital Library (Canada)

    Step 3: Identifying the different community groups and other stakeholders concerned .... How can two-way communication enhance community participation in ...... for maintenance and the rights of specific community groups to drinkable water.

  8. Community Hospital Telehealth Consortium

    National Research Council Canada - National Science Library

    Williams, Elton

    2003-01-01

    The Community Hospital Telehealth Consortium is a unique, forward-thinking, community-based healthcare service project organized around 5 not-for-profit community hospitals located throughout Louisiana and Mississippi...

  9. Community Hospital Telehealth Consortium

    National Research Council Canada - National Science Library

    Williams, Jr, Elton L

    2007-01-01

    The Community Hospital Telehealth Consortium is a unique, forward-thinking, community-based healthcare service project organized around 5 not-for-profit community hospitals located throughout Louisiana and Mississippi...

  10. Community Mentoring: A Tool for Successful Communities

    Science.gov (United States)

    Dodge, Kathryn E.

    2015-01-01

    Mentoring occurs in an ad hoc and largely invisible manner in communities. This mentoring happens through modeling, storytelling, and asking open-ended questions. If Extension specialists and agents were more conscious and intentional about teaching community members and leaders about community mentoring, they would be more successful in resolving…

  11. Keeping "Community" in a Community Land Trust

    Science.gov (United States)

    Gray, Karen A.; Galande, Mugdha

    2011-01-01

    This instrumental case study examined the role of grassroots community organizing in a community land trust (CLT) in a southern U.S. city. Twenty-nine homeowners, renters, board members, community members, and current and former CLT employees were interviewed. In addition, two focus groups of 11 and six participants composed of CLT residents and…

  12. On Community Education and Community Development

    Directory of Open Access Journals (Sweden)

    Dušana Findeisen

    1996-12-01

    Full Text Available In this paper Dušana Findeisen introduces community education and development. She particularly insists upon the fact that in the future our life will not be organised around a paid full time job and that we will be forced into searching other ways of getting involved into society and to acquire our social identity. Community education is one of the ways we could eventually choose. Since community development education in Slovenia has not developed yet the author begins by describing some basic concepts like community and history of community education and community development movement. Further on, she introduces the Andragogical Summer School based in a small Slovenian town, its aim being to encourage Slovenian adult educators to encourage community development projects.

  13. Community development planning

    International Nuclear Information System (INIS)

    Gray, S.I.

    1983-01-01

    The focus of this paper will be methods of local community involvement in the community development planning efforts which will be required at the recommended sites. Community development planning will include capital improvement plans, housing plans, zoning changes, business development plans and other community service and fiscal plans required to meet the projected needs of new residents as a result of the repository construction and operation. This paper will present, (1) the need for community planning, (2) methods of responding to community planning needs, (3) current community planning issues to be addressed. 2 references, 1 figure

  14. Rediscovering community: Interethnic relationships and community gardening

    Directory of Open Access Journals (Sweden)

    August John Hoffman

    2010-11-01

    Full Text Available Community service work, volunteerism and mentoring have recently become popular topics of research as effective methods in improving self-esteem and civic responsibility. In the current study we explored the relationship between participation in a community service gardening program and ethnocentrism. We hypothesised that an inverse correlation would emerge where students who participated in a community service-gardening program would increase their perceptions of the importance of community service work and decrease their scores in ethnocentrism. Results of the paired samples t-test strongly support the hypothesis that community service gardening work significantly reduces reports of ethnocentrism: t(10 = -2.52, (p < .03 for community college students. The ramifications of the study and ramifications for future research are offered.

  15. Community Involvement - Outreach / Development

    OpenAIRE

    2004-01-01

    Tonya Aiken: Horse Program Success. Kyle Cecil: Natural Resources and the Extension Educator. Karol Dyson: Building Strong Communities through Empowerment. Lisa Dennis: "Food Smart". Theresa M. Ferrari: Community Service Experiences & 4-H Teens. t. Stacey Harper: Connecting the Youth with the Community. Joseph G. Hiller: Extension Work in Indian Country. Alice P. Kersey: Outreach to the NR Community. Carla M. Sousa: Learning from Latino Community Efforts.

  16. Community Bioethics: The Health Decisions Community Council.

    Science.gov (United States)

    Gallegos, Tom; Mrgudic, Kate

    1993-01-01

    Sees health care decision making posing variety of complex issues for individuals, families, and providers. Describes Health Decisions Community Council (HDCC), community-based bioethics committee established to offer noninstitutional forum for discussion of health care dilemmas. Notes that social work skills and values for autonomy and…

  17. University-Community Research Partnership for Community ...

    African Journals Online (AJOL)

    This paper analyses the existing university–community partnership in research in Tanzania and proposes a bottom-top model instead of the traditional top-bottom approach which works with perceived needs of communities rather than real needs. Given their core missions, many universities assume that they achieve their ...

  18. A la Carte Community

    DEFF Research Database (Denmark)

    Gundelach, Peter; Brincker, Benedikte

    2010-01-01

    and shows that there are high levels of virtual as well as face-to-face interaction among the members. The participants feel that they belong to the community and many also feel that they are recognised as part of the community. However, the members do not share common values neither in relation to software......The exchange of open source software is a phenomenon that is becoming in- creasingly significant to IT users. This article presents the results of a study of the TYPO3 community, a community related to an open source CMS software. The article explores the community, identity and values of TYPO3...... pro- duction nor generally. Instead, they stress that you are free to choose your own values. Against this background, the authors introduce the notion of an ‘a la carte community', i.e. a community where individuals pick and choose their degree of participation and integra- tion into the community...

  19. Monitoring natural phytoplankton communities

    DEFF Research Database (Denmark)

    Haraguchi, L.; Jakobsen, H. H.; Lundholm, Nina

    2017-01-01

    The phytoplankton community can vary within hours (physiology) to years (climatic and anthropogenic responses), and monitoring at different timescales is relevant for understanding community functioning and assessing changes. However, standard techniques used in monitoring programmes are time...

  20. Bayesian community detection

    DEFF Research Database (Denmark)

    Mørup, Morten; Schmidt, Mikkel N

    2012-01-01

    Many networks of scientific interest naturally decompose into clusters or communities with comparatively fewer external than internal links; however, current Bayesian models of network communities do not exert this intuitive notion of communities. We formulate a nonparametric Bayesian model...... for community detection consistent with an intuitive definition of communities and present a Markov chain Monte Carlo procedure for inferring the community structure. A Matlab toolbox with the proposed inference procedure is available for download. On synthetic and real networks, our model detects communities...... consistent with ground truth, and on real networks, it outperforms existing approaches in predicting missing links. This suggests that community structure is an important structural property of networks that should be explicitly modeled....

  1. Student Engagement with Community

    Science.gov (United States)

    Knight-McKenna, Mary; Felten, Peter; Darby, Alexa

    2018-01-01

    Student engagement in the local community comes with both risks and rewards. This chapter explains the cognitive, behavioral, and affective outcomes of student learning in the community, along with noting the importance of preparation and reflection.

  2. Unsewered Communities in Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — The unsewered communities file was originally conceived as a representation of communities without a municipal sewer system or on-site septic systems. The selection...

  3. Witness, Service, and Community.

    Science.gov (United States)

    McCarthy, Kathleen Mary

    1997-01-01

    Reviews the mission of Catholic schools as defined by the church and Vatican II. Suggests that schools be responsive to their communities, implement fair policies, remain faithful to the Catholic tradition, and foster participation in the community. (JDI)

  4. Community Challenge Grantees

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Community Challenge Grants aim to reform and reduce barriers to achieving affordable, economically vital and sustainable communities. The funds are awarded to...

  5. Community Nursing Home (CNH)

    Data.gov (United States)

    Department of Veterans Affairs — The Community Nursing Home (CNH) database contains a list of all Community Nursing Home facilities under local contract to Veterans Health Administration (VHA). CNH...

  6. Knowledge Communities in fives

    NARCIS (Netherlands)

    Andriessen, J.H.E.

    2006-01-01

    Many modern knowledge intensive organisations rely on knowledge sharing communities, often called ‘communities of practice. These communities can be found in many organisations, but their forms and functions appear to be quite diverse. This implies that questions concerning the functioning of

  7. American Indian Community Colleges.

    Science.gov (United States)

    One Feather, Gerald

    With the emergence of reservation based community colleges (th Navajo Community College and the Dakota Community Colleges), the American Indian people, as decision makers in these institutions, are providing Indians with the technical skills and cultural knowledge necessary for self-determination. Confronted with limited numbers of accredited…

  8. The Learning Community.

    Science.gov (United States)

    Boo, Mary Richardson; Decker, Larry E.

    This guide to community education offers strategies and suggestions for responding to the call for more community involvement in partnership efforts that will benefit education and society. First, a brief introduction summarizes the philosophy of community education, defining it as a belief that learning is lifelong and that self-help efforts…

  9. Discourse Communities and Communities of Practice

    DEFF Research Database (Denmark)

    Pogner, Karl-Heinz

    2005-01-01

    This paper aims at giving a more detailed description and discussion of two concepts of `community' developed in the research areas of text production/ writing and social learning / information management / knowledge sharing and comparing them with each other. The purpose of this theoretical exer...... production at different Danish workplaces (a consulting engi-neering company, a university department and a bank) and discusses their significance in the context of co-located as well as geographically distrib-uted communities....

  10. Loyalty in Online Communities.

    Science.gov (United States)

    Hamilton, William L; Zhang, Justine; Danescu-Niculescu-Mizil, Cristian; Jurafsky, Dan; Leskovec, Jure

    2017-05-01

    Loyalty is an essential component of multi-community engagement. When users have the choice to engage with a variety of different communities, they often become loyal to just one, focusing on that community at the expense of others. However, it is unclear how loyalty is manifested in user behavior, or whether certain community characteristics encourage loyalty. In this paper we operationalize loyalty as a user-community relation: users loyal to a community consistently prefer it over all others; loyal communities retain their loyal users over time. By exploring a large set of Reddit communities, we reveal that loyalty is manifested in remarkably consistent behaviors. Loyal users employ language that signals collective identity and engage with more esoteric, less popular content, indicating that they may play a curational role in surfacing new material. Loyal communities have denser user-user interaction networks and lower rates of triadic closure, suggesting that community-level loyalty is associated with more cohesive interactions and less fragmentation into subgroups. We exploit these general patterns to predict future rates of loyalty. Our results show that a user's propensity to become loyal is apparent from their initial interactions with a community, suggesting that some users are intrinsically loyal from the very beginning.

  11. Mining with communities

    International Nuclear Information System (INIS)

    Veiga, Marcello M.; Scoble, Malcolm; McAllister, Mary Louise

    2001-01-01

    To be considered as sustainable, a mining community needs to adhere to the principles of ecological sustainability, economic vitality and social equity. These principles apply over a long time span, covering both the life of the mine and post-mining closure. The legacy left by a mine to the community after its closure is emerging as a significant aspect of its planning. Progress towards sustainability is made when value is added to a community with respect to these principles by the mining operation during its life cycle. This article presents a series of cases to demonstrate the diverse potential challenges to achieving a sustainable mining community. These case studies of both new and old mining communities are drawn mainly from Canada and from locations abroad where Canadian companies are now building mines. The article concludes by considering various approaches that can foster sustainable mining communities and the role of community consultation and capacity building. (author)

  12. National Community Solar Platform

    Energy Technology Data Exchange (ETDEWEB)

    Rupert, Bart [Clean Energy Collective, Louisville, CO (United States)

    2016-06-30

    This project was created to provide a National Community Solar Platform (NCSP) portal known as Community Solar Hub, that is available to any entity or individual who wants to develop community solar. This has been done by providing a comprehensive portal to make CEC’s solutions, and other proven community solar solutions, externally available for everyone to access – making the process easy through proven platforms to protect subscribers, developers and utilities. The successful completion of this project provides these tools via a web platform and integration APIs, a wide spectrum of community solar projects included in the platform, multiple groups of customers (utilities, EPCs, and advocates) using the platform to develop community solar, and open access to anyone interested in community solar. CEC’s Incubator project includes web-based informational resources, integrated systems for project information and billing systems, and engagement with customers and users by community solar experts. The combined effort externalizes much of Clean Energy Collective’s industry-leading expertise, allowing third parties to develop community solar without duplicating expensive start-up efforts. The availability of this platform creates community solar projects that are cheaper to build and cheaper to participate in, furthering the goals of DOE’s SunShot Initiative. Final SF 425 Final SF 428 Final DOE F 2050.11 Final Report Narrative

  13. Career guidance in communities

    DEFF Research Database (Denmark)

    Thomsen, Rie

    for the development of a critically reflexive career guidance practice. The considerations are organised around seven elements. 1. Creating opportunity, structure and access 2. Entering a community and increasing visibility 3. Providing guidance in communities 4. Exploring potentials in guidance situations 5...... in career guidance practices as well as in the lives of the people in the communities. This paper falls into two parts: The first part considers the collective as the starting point for the development of meaningful career guidance activities. Based on previous research on career guidance in communities......The aim of this paper is to inspire practitioners and professionals to leave their offices to bring career guidance into communities that might not identify with career guidance in the first instance. By making the effort to engage with communities, practitioners may bring about a critical change...

  14. Collaborative Communities of Firms

    DEFF Research Database (Denmark)

    2011-01-01

    and developing strategic initiatives that aid the community as a whole. We discuss the facilitator role of the shared services provider, contrasting it with the coordinator role found in other multi-firm organizations, and we show how shared services providers function by describing three examples...... is an organizational model called the collaborative community of firms. This chapter addresses an important organizational role in a collaborative community, that of the shared services provider. The shared services provider acts as a facilitator in the community, helping member firms collaborate with one another...... of collaborative communities of firms from different sectors: the U.S.-based Blade.org and two Denmark-based communities, the Kalundborg Industrial Symbiosis and MG50. Implications for the theory and practice of organization design are discussed....

  15. Interrupting Mythic Community

    Directory of Open Access Journals (Sweden)

    Linnell Secomb

    2013-09-01

    Full Text Available If nation is increasingly perceived as a less than honourable institution formed through war, invasion and geo-political territorialisation, and government is widely denounced as the site of political intrigue and the means of subjectification of citizen–voters, community appears to escape this critique and to be viewed as an idyllic formation based on bonds of affinity. However, this romancing of community is disrupted by trans-cultural and sub-cultural formations that expose the fantasy of a harmonious, homogenous community. While community is often conceived as arising organically from familial, tribal or cultural similarity, or as constituted through a common history and shared cultural institutions, this totalising conception of community is interrupted by the demands of difference and heterogeneity and by a questioning of the idyll of community authenticated in myths of archaic origin.

  16. Community impact management

    International Nuclear Information System (INIS)

    Baril, R.G.

    1983-01-01

    Industrial expansion, whether for resource extraction, refining, production or distribution and particularly the construction of energy facilities, usually has many effects on communities. In the early 1970s, as more experience was gained with large projects and as communities became more sensitive to their needs and rights, the negative effects of projects gained some prominence. Communities questioned whether it was in their best interest to accept changes that large corporations would impose on them. It is in this context that Ontario Hydro, in 1977, set up the first of four community impact agreements for the construction of generating stations. This paper discusses these community impact agreements and how they have become the framework for the management of community impacts. Also, the paper discusses a model for compensating social impacts

  17. Coal, culture and community

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-01

    16 papers are presented with the following titles: the miners; municipalisation and the millenium - Bolton-upon-Dearne Urban District Council 1899-1914; the traditional working class community revisited; the cultural capital of coal mining communities; activities, strike-breakers and coal communities; the limits of protest - media coverage of the Orgreave picket during the miners` strike; in defence of home and hearth? Families, friendships and feminism in mining communities; young people`s attitudes to the police in mining communities; the determinants of productivity growth in the British coal mining industry, 1976-1989; strategic responses to flexibility - a case study in coal; no coal turned in Yorkshire?; the North-South divide in the Central Coalfields; the psychological effects of redundancy and worklessness - a case study from the coalfields; the Dearne Valley initiative; the future under labour: and coal, culture and the community.

  18. MBS Native Plant Communities

    Data.gov (United States)

    Minnesota Department of Natural Resources — This data layer contains results of the Minnesota County Biological Survey (MCBS). It includes polygons representing the highest quality native plant communities...

  19. Communities running energy

    International Nuclear Information System (INIS)

    Wallace, Paula

    2014-01-01

    The conditions for the evolution of community renewable energy are right in some parts of the country. This article reports on some recent developments, with opportunities for business and local government. Many communities across Australia are developing wind and solar projects, but only a fraction are actually generating power. Nicky Ison, researcher of community renewable energy (CRE) at the Institute for Sustainable Futures, is director of the Community Power Agency. The latter is behind a new coalition lobbying the federal government in Australia to establish a $50 million grant program to support the development stage of CRE projects.

  20. Defining political community

    Directory of Open Access Journals (Sweden)

    Sladeček Michal M.

    2002-01-01

    Full Text Available This paper considers the concept of political community, its constitution and value. The starting point is that the concept of community is not sufficiently recognized in modern political theories, as well as in contemporary liberal theory. In the last two decades communitarian and republican political theory attempted to revitalize this notion. The first part of the paper elaborates on the polemics between these three theoretical orientations. The concluding part examines the possibilities and prospect for stable political community in conditions of pluralism of particular social communities and ethnocultural heterogeneity.

  1. Nuclear Community in network

    International Nuclear Information System (INIS)

    Tejedor, E.

    2014-01-01

    The internet has revolutionized the ways of communication and many companies/ organizations have adapted to the change but others have not, or have done it halfway. This presentation is a review of the main characteristics of virtual communities and their typology. The status of the Nuclear Online Community, both pro nuclear and antinuclear is analysed , and their main similarities and differences are discussed. The Pro nuclear Online Community is formed gradually. This presentation attempts to define some ways to increase the scope of the Community and encourage greater dissemination of the characteristics of nuclear energy. (Author)

  2. Open source community organization

    CSIR Research Space (South Africa)

    Molefe, Onkgopotse M

    2009-05-01

    Full Text Available Open Source communities (OSCs), sometimes referred to as virtual or online communities play a significant role in terms of the contribution they continue to make in producing user-friendly Open Source Software (OSS) solutions. Many projects have...

  3. EMI New User Communities

    CERN Document Server

    Riedel, M

    2013-01-01

    This document provides pieces of information about new user communities that directly or indirectly take advantage of EMI Products. Each user community is described via one specific EMI product use case to understand and communicate the current usage of EMI Products in practice.

  4. Community as Curriculum

    Science.gov (United States)

    Cummins, Jim; Chow, Patricia; Schechter, Sandra R.

    2006-01-01

    This article describes a project involving teachers, parents, and university researchers in collaborations to support multilingual children's development and use of language. Strategies for fostering an inclusive climate included building on the interests and resources of the local community, involving community members in curriculum development,…

  5. Community Music in Australia

    Science.gov (United States)

    Harrison, Gillian

    2010-01-01

    This paper presents a historical perspective to the development of community music in Australia. Finding political support in Australia's progressive arts policies of the late 1970s, community music is discussed as embracing the principles of access and equity and supporting the development of musical skills in the context of social change and…

  6. Decoding communities in networks

    Science.gov (United States)

    Radicchi, Filippo

    2018-02-01

    According to a recent information-theoretical proposal, the problem of defining and identifying communities in networks can be interpreted as a classical communication task over a noisy channel: memberships of nodes are information bits erased by the channel, edges and nonedges in the network are parity bits introduced by the encoder but degraded through the channel, and a community identification algorithm is a decoder. The interpretation is perfectly equivalent to the one at the basis of well-known statistical inference algorithms for community detection. The only difference in the interpretation is that a noisy channel replaces a stochastic network model. However, the different perspective gives the opportunity to take advantage of the rich set of tools of coding theory to generate novel insights on the problem of community detection. In this paper, we illustrate two main applications of standard coding-theoretical methods to community detection. First, we leverage a state-of-the-art decoding technique to generate a family of quasioptimal community detection algorithms. Second and more important, we show that the Shannon's noisy-channel coding theorem can be invoked to establish a lower bound, here named as decodability bound, for the maximum amount of noise tolerable by an ideal decoder to achieve perfect detection of communities. When computed for well-established synthetic benchmarks, the decodability bound explains accurately the performance achieved by the best community detection algorithms existing on the market, telling us that only little room for their improvement is still potentially left.

  7. Caring for the community.

    Science.gov (United States)

    Spitzer, Roxane

    2004-01-01

    Nurses can play a unique role in caring for their communities. The first and most obvious role is the direct care of patients, the underlying raison d'etre of nursing, and second is the indirect care of the patients' families and friends. The hands-on healing image of nurses is held by many people and personified through the years by such real-life examples as Clara Barton. It is also the image that attracts many to nursing and is fueled by desire--the desire to help, to make a positive difference, and to serve people. It is often a powerful one-on-one connection between caregiver and receiver, nurse and patient, that defines the role of nursing. Yet, nurses can--and should--play broader roles in caring for their communities. This includes the internal community within one's own organization, the environment in which nurses work, and the larger external community--or communities--in which one lives. By reaching out and caring for the broader communities, nurses have the opportunity to grow while the communities benefit from their participatory caring. In addition, the image of nursing is enhanced externally. The nurse as community caregiver melds the heart and soul of nursing for a new 21st century model of caring.

  8. Decoding communities in networks.

    Science.gov (United States)

    Radicchi, Filippo

    2018-02-01

    According to a recent information-theoretical proposal, the problem of defining and identifying communities in networks can be interpreted as a classical communication task over a noisy channel: memberships of nodes are information bits erased by the channel, edges and nonedges in the network are parity bits introduced by the encoder but degraded through the channel, and a community identification algorithm is a decoder. The interpretation is perfectly equivalent to the one at the basis of well-known statistical inference algorithms for community detection. The only difference in the interpretation is that a noisy channel replaces a stochastic network model. However, the different perspective gives the opportunity to take advantage of the rich set of tools of coding theory to generate novel insights on the problem of community detection. In this paper, we illustrate two main applications of standard coding-theoretical methods to community detection. First, we leverage a state-of-the-art decoding technique to generate a family of quasioptimal community detection algorithms. Second and more important, we show that the Shannon's noisy-channel coding theorem can be invoked to establish a lower bound, here named as decodability bound, for the maximum amount of noise tolerable by an ideal decoder to achieve perfect detection of communities. When computed for well-established synthetic benchmarks, the decodability bound explains accurately the performance achieved by the best community detection algorithms existing on the market, telling us that only little room for their improvement is still potentially left.

  9. Community of Practice

    DEFF Research Database (Denmark)

    Busch-Jensen, Peter

    2014-01-01

    The concept of “communities of practice” is of relatively recent date. The concept gained momentum with Jean Lave and Etienne Wenger’s book from 1991, Situated learning: Legitimate peripheral participation. Since then, the notion of “communities of practice” has been a focus of attention, not least...

  10. An Enriching Community.

    Science.gov (United States)

    Holland, Nancy A.; Burroughs, Jean

    2001-01-01

    Successful school-community partnerships in Volusia (Florida) Public Schools are the results of marketing creatively, meeting community members' needs, and bringing the right people together. The 3-year old program now offers students of all ages an expanding list of enrichment classes on many subjects for a nominal fee. (MLH)

  11. Community Research Mythology

    Science.gov (United States)

    Waldern, Barbara

    2006-01-01

    This article is dedicated to an in-depth discussion of the theme community and the implications the multiple meanings of community hold for the field of qualitative research. This theme surfaced from Walderns 2003 study entitled Resistance to Research in Vancouvers Downtown Eastside, which dealt with participant resistance to joining research…

  12. Community Information Systems.

    Science.gov (United States)

    Freeman, Andrew

    Information is provided on technological and social trends as background for a workshop designed to heighten the consciousness of workers in community information systems. Initially, the basic terminology is considered in its implications for an integrated perspective of community information systems, with particular attention given to the meaning…

  13. Alaska Community Transit

    Science.gov (United States)

    Grant Information Human Services Funding 5310 5316 (Repealed) 5317 (Repealed) Alaska Mental Health Trust Department of Transportation & Public Facilities/ Alaska Community Transit Search DOT&PF State of Alaska Photo banner DOT&PF> Program Development > Alaska Community Transit Home About Us

  14. Community-Based Care

    Science.gov (United States)

    ... our e-newsletter! Aging & Health A to Z Community-Based Care Basic Facts & Information A variety of healthcare options ... day care centers are either in churches or community centers. Adult day care is commonly used to care for people who ...

  15. Community of Practice

    DEFF Research Database (Denmark)

    Busch-Jensen, Peter

    2012-01-01

    A clear and informative description of the theoretical and methodological content and implications of the concept of Community of Practice......A clear and informative description of the theoretical and methodological content and implications of the concept of Community of Practice...

  16. Community Colleges Today

    Science.gov (United States)

    Crawford, Corinne; Jervis, Angela

    2011-01-01

    Dr. Jill Biden, Vice President Joe Biden's wife, has been teaching in community colleges for the past 18 years. Dr. Biden believes that community colleges are "…uniquely American institutions where anyone who walks through the door is one step closer to realizing the American dream." This is an inspiring sentiment. However, of all the…

  17. It Takes a Community

    Science.gov (United States)

    Jacobson, Reuben; Villarreal, Lisa; Muñoz, José; Mahaffey, Robert

    2018-01-01

    Community schools are a sound education reform strategy that gets results. They start by asking local students and their families what they need to succeed in school, then they reach out to relevant community partners and use the school as the hub for organizing partnerships, services, and supports. By listening closely to the assets and needs of…

  18. The Ethic of Community

    Science.gov (United States)

    Furman, Gail C.

    2004-01-01

    This article proposes the concept of an ethic of community to complement and extend other ethical frames used in education e.g. the ethics of justice, critique, and care. Proceeding from the traditional definition of ethics as the study of moral duty and obligation, ethic of community is defined as the moral responsibility to engage in communal…

  19. UNM in the Community.

    Science.gov (United States)

    Quantum: Research & Scholarship, 1998

    1998-01-01

    Profiles 10 University of New Mexico community programs: University Art Museum, Rio Grande and Four Corners Writing Projects, Blacks in the Southwest (exhibit), New Mexico Engineering Research Institute's Environmental Finance Center, Adolescent Social Action Program, Minority Engineering Programs, Rural Community College Initiative, Valencia…

  20. Creating Learning Communities: An Introduction to Community Education.

    Science.gov (United States)

    Decker, Larry E.; Boo, Mary Richardson

    Schools cannot succeed without collaboration with parents and the community. Defining community education as active community involvement in the education of children, this booklet describes aspects of community education. Community education, the booklet points out, can take place at physical locations such as formal school buildings, which lie…

  1. Predictability in community dynamics.

    Science.gov (United States)

    Blonder, Benjamin; Moulton, Derek E; Blois, Jessica; Enquist, Brian J; Graae, Bente J; Macias-Fauria, Marc; McGill, Brian; Nogué, Sandra; Ordonez, Alejandro; Sandel, Brody; Svenning, Jens-Christian

    2017-03-01

    The coupling between community composition and climate change spans a gradient from no lags to strong lags. The no-lag hypothesis is the foundation of many ecophysiological models, correlative species distribution modelling and climate reconstruction approaches. Simple lag hypotheses have become prominent in disequilibrium ecology, proposing that communities track climate change following a fixed function or with a time delay. However, more complex dynamics are possible and may lead to memory effects and alternate unstable states. We develop graphical and analytic methods for assessing these scenarios and show that these dynamics can appear in even simple models. The overall implications are that (1) complex community dynamics may be common and (2) detailed knowledge of past climate change and community states will often be necessary yet sometimes insufficient to make predictions of a community's future state. © 2017 John Wiley & Sons Ltd/CNRS.

  2. [Community marketing of contraceptives].

    Science.gov (United States)

    Urrutia, J M

    1987-09-01

    The 5-year-old community contraceptive distribution program developed by PROFAMILIA, Colombia's private family planning organization, has given excellent results, but several cost-effectiveness comparisons with social marketing programs have suggested that commercial distribution programs are superior. The community contraceptive distribution program has a high content of information and education activities, which produced significant increases in knowledge and use of contraception in the communities covered. It has been a fundamental support for the social marketing program, creating much of the demand for contraceptive products that the social marketing program has filled. The social marketing program has given good results in terms of volume of sales and in cost-effectiveness since 1976, prompting calls for replacement of the community contraceptive distribution program by the social marketing program in those sectors where knowledge and use of contraception have achieved acceptable levels. An experiment in the Department of Santander in 1984 and 1985 gave very favorable results, suggesting that community contraceptive distribution programs should be replaced by social marketing programs in all more developed markets. But economic problems in 1985 and the decision of manufacturers to decrease the profit margin for PROFAMILIA jeopardized the social marketing program. The community distribution program covered about 20% of the market. Reduced profits in the social marketing program threatened its continued expansion, at the same time that potential demand was growing because of increases in the fertile aged population and increased use of contraception. To meet the need, PROFAMILIA combined the community contraceptive distribution and social marketing programs into a new entity to be called community marketing. The strategy of the community marketing program will be to maintain PROFAMILIA's participation in the market and aid the growth of demand for

  3. Building global learning communities

    Directory of Open Access Journals (Sweden)

    Averill Gordon

    2013-09-01

    Full Text Available Within the background where education is increasingly driven by the economies of scale and research funding, we propose an alternative online open and connected framework (OOC for building global learning communities using mobile social media. We critique a three year action research case study involving building collaborative global learning communities around a community of practice of learning researchers and practitioners. The results include the development of a framework for utilising mobile social media to support collaborative curriculum development across international boundaries. We conclude that this framework is potentially transferrable to a range of educational contexts where the focus is upon student-generated mobile social media projects.

  4. Collaborative Communities of Firms

    DEFF Research Database (Denmark)

    Bøllingtoft, Anne; Müller, Sabine; Ulhøi, John Parm

    2011-01-01

    and developing strategic initiatives that aid the community as a whole. We discuss the facilitator role of the shared services provider, contrasting it with the coordinator role found in other multi-firm organizations, and we show how shared services providers function by describing three examples...... of collaborative communities of firms from different sectors: the U.S.-based Blade.org and two Denmark-based communities, the Kalundborg Industrial Symbiosis and MG50. Implications for the theory and practice of organization design are discussed....

  5. [(Community) psychiatry, a parenthesis?].

    Science.gov (United States)

    Bucheron, Bastien

    2015-01-01

    Beyond an a priori antagonism between these two notions, alienism and mental health cultivate analogies as to the place to which they assign mental health. Is community psychiatry not therefore simply a parenthesis in the history of psychiatry? The question is raised therefore regarding the place given to subjectivity and complexity. What must be done to ensure that this parenthesis of community psychiatry does not close? It is perhaps a case of making use of the tools which institutional psychotherapy has developed to keep the community psychiatry spirit alive. Copyright © 2015. Published by Elsevier Masson SAS.

  6. The European Community context

    International Nuclear Information System (INIS)

    Charrault, J.C.

    1984-01-01

    The chapter discusses the following: energy resources and energy policy within the European Community; political aspects in the Member States; Community involvement in the transport of radioactive materials; responsibility for safety in relation to transport lies with the governments of the Member States, but the Community through its various organizations also has certain responsibilities, e.g. to ensure that transport regulations are harmonised, to carry out safeguards checks, to provide standards for health and safety of workers and the public, and to cooperate with Member States in developing guidelines for transport safety. (U.K.)

  7. Promotion of the formation of environmentally friendly energy community (FY 2000). Demonstration of the gas turbine repowering waste combined power generation technology; 2000 nendo kankyo chowagata energy community keisei sokushin seika hokokusho. Gas turbine repowering haikibutsu fukugo hatsuden gijutsu jissho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Demonstrative operation was conducted of the super waste power generation system in which the low temperature steam generated in waste incinerator is raised in temperature using the combustion exhaust gas emitted after the power generation using another gas turbine for conducting the steam turbine power generation with high efficiency. The FY 2000 results were summed up. In the demonstrative operation, operation and data acquisition/analysis were conducted following the previous fiscal year by 25MW class gas turbine repowering waste combined power generation facilities (Takahama power plant). Further, four years after the start of operation, the secular variation was studied by disassembly/inspection of equipment. As a result of the operation, the thermal efficiency was approximately 35%, much higher than the existing waste power generation. It was verified that the power system was maintained by the same maintenance as that of the ordinary power system. Moreover, the important point of this system is that no special corrosion resistant materials are used and that the high-efficiency waste power generation was demonstrated by combining the existing equipment. It can be said that the super waste power system has high qualities for forming energy community as a regionally dispersed stabilized power source. (NEDO)

  8. Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

    Science.gov (United States)

    O'Neil, Dara

    2002-01-01

    Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

  9. COMMUNITY HEALTH & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    user

    2Department of Community Health, University of Benin, Benin City, Nigeria. ... Mental morbidity is a public health problem that can lead to a great burden of disability in the community. ..... community study in Sao Paulo, Brazil where.

  10. Engaging the Community

    CSIR Research Space (South Africa)

    Jacobs-Mata, Inga M

    2011-03-01

    Full Text Available Claassen observes, "There is an interesting co-existence of traditional culture and modern ideas and also "African" religion and Christianity. Traditional leaders and community members were very open and most helpful in the research." Photos: Photo...

  11. Cleanups in My Community

    Data.gov (United States)

    U.S. Environmental Protection Agency — Cleanups in My Community (CIMC) is a public web application that enables integrated access through maps, lists and search filtering to site-specific information EPA...

  12. Police Community Outreach

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Community outreach activities attended by Pittsburgh Police Officers, starting from January 1 2016. Includes Zone, Event Name, Location, Date and Time.

  13. FEMA DFIRM Community Info

    Data.gov (United States)

    Minnesota Department of Natural Resources — This table is a lookup table that contains community map repository details and map history information that is shown on the Flood Insurance Rate Map (FIRM) legend...

  14. Green Power Communities

    Science.gov (United States)

    GPCs are towns, villages, cities, counties, or tribal governments in which the local government, businesses, and residents collectively use green power in amounts that meet or exceed EPA's Green Power Community purchase requirements.

  15. Online Community Transition Detection

    DEFF Research Database (Denmark)

    Tan, Biying; Zhu, Feida; Qu, Qiang

    2014-01-01

    communities over time. How to automatically detect the online community transitions of individual users is a research problem of immense practical value yet with great technical challenges. In this paper, we propose an algorithm based on the Minimum Description Length (MDL) principle to trace the evolution......Mining user behavior patterns in social networks is of great importance in user behavior analysis, targeted marketing, churn prediction and other applications. However, less effort has been made to study the evolution of user behavior in social communities. In particular, users join and leave...... of community transition of individual users, adaptive to the noisy behavior. Experiments on real data sets demonstrate the efficiency and effectiveness of our proposed method....

  16. 2015 Community Survey Data

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — These are the answers to the 2015 Community Survey.A comprehensive summary of the survey results can be found here.The survey asked town members to address their...

  17. Small Community Training & Education

    Science.gov (United States)

    Operators Small Systems Small Community Training & Education education, training and professional implement the 1996 Amendments to the Safe Drinking Water Act (SDWA). • EPA Environmental Education Center

  18. Pneumonia - children - community acquired

    Science.gov (United States)

    Bronchopneumonia - children; Community-acquired pneumonia - children; CAP - children ... Viruses are the most common cause of pneumonia in infants and children. Ways your child can get CAP include: Bacteria and viruses living in the nose, sinuses, or mouth may spread ...

  19. RAS Initiative - Community Outreach

    Science.gov (United States)

    Through community and technical collaborations, workshops and symposia, and the distribution of reference reagents, the RAS Initiative seeks to increase the sharing of knowledge and resources essential to defeating cancers caused by mutant RAS genes.

  20. Fishing Community Profiles

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — To enable fisheries managers to comply with National Standard 8 (NS8), NMFS social scientists around the nation are preparing fishing community profiles that present...

  1. Taskable Reactive Agent Communities

    National Research Council Canada - National Science Library

    Myers, Karen

    2002-01-01

    The focus of Taskable Reactive Agent Communities (TRAC) project was to develop mixed-initiative technology to enable humans to supervise and manage teams of agents as they perform tasks in dynamic environments...

  2. Assessing Community Telecentres

    International Development Research Centre (IDRC) Digital Library (Canada)

    the impacts of telecentres on their programs, such as youth employment or ..... the community's satisfaction with its performance (see Table 10), and basic ..... The result (average rural income) is compared with the estimated capital cost of ...

  3. Community Points of Interest

    Data.gov (United States)

    Town of Cary, North Carolina — View locations of Cary’s community centers, fire, police and EMS stations, hospitals, libraries, Cary Convenience Center, schools and post offices. Note commercial...

  4. Mobilizing community energy

    International Nuclear Information System (INIS)

    Bomberg, Elizabeth; McEwen, Nicola

    2012-01-01

    What explains the galvanising of communities to participate actively in energy projects? How do groups mobilize to overcome the often formidable barriers highlighted in the existing literature? Drawing on original qualitative research of 100 community energy groups in Scotland, including six in-depth case studies, we explain how effective mobilization occurs and the political dynamics surrounding such mobilization. To capture these dynamics, we adapt theories offered by literature on social movements, with a particular focus on resource mobilization theories. Applying our adapted framework, we identify two particular sets of resources shaping community energy mobilization: (i) structural resources, which refer to the broad political context structuring and constraining opportunities for community energy mobilization; and (ii) symbolic resources—less tangible resources used to galvanise participants. We investigate to what extent our case study groups were able to draw upon and exploit these resources. We find that structural resources can either facilitate or hinder mobilization; what matters is how state resources are exploited and constraints mitigated. The use of symbolic resources was highly effective in aiding mobilization. Each of the groups examined – despite their considerable variation – effectively exploited symbolic resources such as shared identity or desire for strong, self reliant communities. - Highlights: ► Explains how/why community energy groups mobilize and the political dynamics surrounding it. ► Draws on original qualitative research of 100 community energy groups in Scotland. ► Identifies two particular sets of resources (structural and symbolic) and their importance. ► Explains how these resources shape community energy mobilization in Scotland. ► Provides an original application of resource mobilization theory to the field of energy studies.

  5. Designing for Communities

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    In 2008, Mark Boulton's small design firm won the project to redesign drupal.org home to the Drupal open source content management project and its community of over 400,000 users and developers. Designing for open source communities has its challenges: it is a developer-centric environment where discussion, debate and consensus rules and where design processes are often viewed sceptically. To help dispel some misconceptions behind the design process, Mark's team worked completely openly with the Drupal community - and broader the web design community - throughout the project. This talk will walk through some of the challenges and solutions for designing for large communities. Mark will share the successes - and the horror stories - of how a traditional design process was challenged every step of the way and how the Drupal community became an integral part of that new process. Mark and his team will be working with the Communication Group on an open project to r...

  6. Creating one planet communities

    International Nuclear Information System (INIS)

    Wilts, R.

    2010-01-01

    This presentation discussed low carbon communities that used a variety of sustainable energy technologies to reduce energy consumption and waste. The presentation was given by a company who has adopted a One Planet framework to ensure the development of zero carbon, zero waste, sustainable communities.The Dockside Green project was awarded North America's highest leadership in energy and environmental design (LEED) score. The community includes a waste biomass plant and an on-site wastewater treatment plant. Excess heat produced by the community's greenhouse gas (GHG) neutral biomass district heating system is sold to neighbouring communities. The BedZED project in the United Kingdom uses a high-density format to support a community living and workspace environment that uses rainwater harvesting, passive solar heating, high performance envelopes, and green roofs. The site includes 40 electric car charging stations. A combined heat and power (CHP) biomass plant provides electricity and hot water to all buildings. Neighbourhood-scale sustainable development is expected to have a significant impact on the ecological footprint of North American cities. Carbon neutral projects in Canada were also listed. tabs., figs.

  7. Community Involvement in School: Social Relationships in a Bedroom Community

    Science.gov (United States)

    Preston, Jane P.

    2013-01-01

    The purpose of this qualitative case study was to describe how community involvement in school is associated with the social relationships existing/lacking within a bedroom community. Thirty-five interviews with school council members, teachers, and community members highlighted that traditional forms of community involvement in school generate…

  8. Observation of online communities

    DEFF Research Database (Denmark)

    Nørskov, Sladjana V.; Rask, Morten

    2011-01-01

    This paper addresses the application of observation to online settings with a special focus on observer roles. It draws on a study of online observation of a virtual community, i.e. an open source software (OSS) community. The paper examines general and specific advantages and disadvantages...... of the observer roles in online settings by relating these roles to the same roles assumed in offline settings. The study suggests that under the right circumstances online and offline observation may benefit from being combined as they complement each other well. Quality issues and factors important to elicit...... trustworthy observational data from online study settings, such as OSS communities, are discussed. A proposition is made concerning how threats to credibility and transferability in relation to online observation (i.e. lack of richness and detail, risk of misunderstandings) can be diminished, while...

  9. Athena Community Office

    Science.gov (United States)

    Martínez-Núnez, S.; Barcons, X.; Barret, D.; Bozzo, E.; Carrera, F. J.; Ceballos, M. T.; Gómez, S.; Monterde, M. P.; Rau, A.

    2017-03-01

    The Athena Community Office (ACO) has been established by ESA's Athena Science Study Team (ASST) in order to obtain support in performing its tasks assigned by ESA, and most specially in the ASST role as "focal point for the interests of the broad scientific community". The ACO is led by the Instituto de Física de Cantabria (CSIC-UC), and its activities are funded by CSIC and UC. Further ACO contributors are the University of Geneva, MPE and IRAP. In this poster, we present ACO to the Spanish Astronomical Community, informing about its main responsibilities, which are: assist the ASST in organising and collecting support from the Athena Working Groups and Topical Panels; organise and maintain the documentation generated by the Athena Working Groups and Topical Panels; manage the Working Group and Topical Panel membership lists; assist the ASST in promoting Athena science capabilities in the research world, through conferences and workshops; keep a record of all papers and presentations related to Athena; support the production of ASST documents; produce and distribute regularly an Athena Newsletter, informing the community about all mission and science developments; create and maintain the Athena Community web portal; maintain an active communication activity; promote, organise and support Athena science-related public outreach, in coordination with ESA and other agencies involved when appropriate; and, design, produce materials and provide pointers to available materials produced by other parties. In summary, ACO is meant to become a focal point to facilitate the scientific exchange between the Athena activities and the scientific community at large, and to disseminate the Athena science objectives to the general public.

  10. Marketing of the online communities

    OpenAIRE

    Pražan, Jan

    2010-01-01

    The Bachelor Thesis "Marketing of the online communities" is devoted to online virtual communities, one of the phenomena of the current Internet. Goal of this thesis is to determine the factors that predispose the successful operation of online communities. The thesis defines the essentials features of social media, characterized by online communities and their role in marketing. It deals with strategic and tactical aspects of building and maintaining successful online communities. Based on t...

  11. Welfare Landscape and Communities

    DEFF Research Database (Denmark)

    Braae, Ellen Marie

    2017-01-01

    Danish housing developments of the post-war era were a cornerstone in the implementation of the welfare vision and the overall urban and landscape planning in the post-war period. The new city was a horizontal city and – as it will be my primary ambition to show – a green and landscape-like city....... The landscape came, in Denmark, to play a prominent role and became synonymous with ‘The Good Life’, but it also presented a number of moral imperatives. The article concerns how communities and community feelings found their expression in the Danish ‘welfare landscapes’....

  12. The Community of Rights

    DEFF Research Database (Denmark)

    Kjærgård, Jonas Ross

    2012-01-01

    be used in a particularistic and excluding way which was the case in the legislation of Maximilien de Robespierre’s Terror Regime. Situated somewhere between inclusion in and exclusion from the community of rights, the playwright and political activist Olympe de Gouges sought to propagate an understanding...... of the natural that could better accommodate women and nonmarital children. Her attempts were futile, however, and in 1793 she was sentenced to death according to a newly written law meant to prosecute enemies of the Republic’s natural community....

  13. Community gardens: lessons learned from California Healthy Cities and Communities.

    Science.gov (United States)

    Twiss, Joan; Dickinson, Joy; Duma, Shirley; Kleinman, Tanya; Paulsen, Heather; Rilveria, Liz

    2003-09-01

    Community gardens enhance nutrition and physical activity and promote the role of public health in improving quality of life. Opportunities to organize around other issues and build social capital also emerge through community gardens. California Healthy Cities and Communities (CHCC) promotes an inclusionary and systems approach to improving community health. CHCC has funded community-based nutrition and physical activity programs in several cities. Successful community gardens were developed by many cities incorporating local leadership and resources, volunteers and community partners, and skills-building opportunities for participants. Through community garden initiatives, cities have enacted policies for interim land and complimentary water use, improved access to produce, elevated public consciousness about public health, created culturally appropriate educational and training materials, and strengthened community building skills.

  14. Celebrating indigenous communities compassionate traditions.

    Science.gov (United States)

    Prince, Holly

    2018-01-01

    Living in a compassionate community is not a new practice in First Nations communities; they have always recognized dying as a social experience. First Nations hold extensive traditional knowledge and have community-based practices to support the personal, familial, and community experiences surrounding end-of-life. However, western health systems were imposed and typically did not support these social and cultural practices at end of life. In fact, the different expectations of western medicine and the community related to end of life care has created stress and misunderstanding for both. One solution is for First Nations communities to develop palliative care programs so that people can receive care at home amongst their family, community and culture. Our research project "Improving End-of-Life Care in First Nations Communities" (EOLFN) was funded by the Canadian Institutes of Health Research [2010-2015] and was conducted in partnership with four First Nations communities in Canada (see www.eolfn.lakeheadu.ca). Results included a community capacity development approach to support Indigenous models of care at end-of-life. The workshop will describe the community capacity development process used to develop palliative care programs in First Nations communities. It will highlight the foundation to this approach, namely, grounding the program in community values and principles, rooted in individual, family, community and culture. Two First Nations communities will share stories about their experiences developing their own palliative care programs, which celebrated cultural capacity in their communities while enhancing medical palliative care services in a way that respected and integrated with their community cultural practices. This workshop shares the experiences of two First Nations communities who developed palliative care programs by building upon community culture, values and principles. The underlying model guiding development is shared.

  15. The Community College Option

    Science.gov (United States)

    Rosenbaum, James E.; Ahearn, Caitlin; Rosenbaum, Janet

    2016-01-01

    Efforts to promote college for all for all has opened college doors to a broad range of students. But college--and career success after college--doesn't have to mean a bachelor's degree. Community college credentials, such as associate's degrees and one-year certificates, can lead to further degrees or jobs that offer more benefits than students…

  16. Emerging Communities of Practice

    Science.gov (United States)

    McAlister, Martha

    2016-01-01

    Communities of practice are emerging as an innovative approach to faculty development. While collaborative learning is becoming popular in the classroom, autonomy and individualism continue to dominate the culture of higher education for faculty. However, as we begin to recognize that old solutions to new problems are no longer effective, there is…

  17. Social Innovation Communities

    Science.gov (United States)

    Satrustegui, Alfonso Unceta; Castro-Spila, Javier; Luna, Alvaro

    2017-01-01

    The concepts of hybridity and governance have been an important line of research in the context of social companies and public institutions. The purpose of this paper is to explore these notions in the framework of hybrid communities of social innovation by showing the importance of intangible capital in the improvement of functional skills,…

  18. No Community Left Behind

    Science.gov (United States)

    Schlechty, Phillip C.

    2008-01-01

    The debate over the reauthorization of No Child Left Behind (NCLB) generally overlooks--or looks past--what may be the most fundamental flaw in that legislation. As the law is now written, decisions regarding what the young should know and be able to do are removed from the hands of parents and local community leaders and turned over to officials…

  19. Violence and Community Capabilities:

    International Development Research Centre (IDRC) Digital Library (Canada)

    ous cities boast community-based initiatives that significantly reduce the ..... account the ambiguous yet critical role that gangs can play at the local level. .... promote and exercise other forms of violence, such as extortion, sexual abuse, and ... of employment that comes without any rights or protection, and making informal.

  20. Joining the Global Community.

    Science.gov (United States)

    Cawley, John; Knoester, Jocelyn

    2002-01-01

    Canada World Youth enables young Canadians to live in another part of Canada with youths from a developing country for several months while volunteering in community projects. Then they move as a group to the partner country for several months where the program structure is the same. Participants acquire the skills and values necessary to…

  1. Participatory academic communities

    DEFF Research Database (Denmark)

    Aaen, Janus Holst; Nørgård, Rikke Toft

    2015-01-01

    understanding of participation in edu-cation can move educatees’ learning beyond institutions through focusing on educatees as researchers, participat-ing in society, building a research community and obtaining academic citizenship. Further, the article discusses how a value-based, vision-driven approach...

  2. BNFL and community relations

    International Nuclear Information System (INIS)

    Bolter, H.

    1982-01-01

    The contributions made by BNFL to community relations are described in an illustrated booklet under the headings: introduction (general policy); donations and sponsorships; BNFL talks service; brochures and public information; visits; local liaison committees; industrial training; sponsored students; apprentices. (U.K.)

  3. Building Global Learning Communities

    Science.gov (United States)

    Cochrane, Thomas; Buchem, Ilona; Camacho, Mar; Cronin, Catherine; Gordon, Averill; Keegan, Helen

    2013-01-01

    Within the background where education is increasingly driven by the economies of scale and research funding, we propose an alternative online open and connected framework (OOC) for building global learning communities using mobile social media. We critique a three year action research case study involving building collaborative global learning…

  4. For Community Sake

    Science.gov (United States)

    Dunn, Jeffery W.

    2013-01-01

    This article examines whether religious education plays a role in the promotion of harmonious international relations, arguing that a broad religious education with a dialogical approach goes to the heart of what it means to be a citizen in a global community. Christian theologian Hans Kung argues in his book "Judaism: Between Yesterday and…

  5. One Community Working Together

    Science.gov (United States)

    Weis, Charles

    2011-01-01

    In the city of San Jose, more than half of all public school students tested are not proficient in their grade-level skills. This article discusses how school, civic and community leaders have joined forces with the goal of eliminating the achievement gap in San Jose by 2020. This wide and highly inclusive collaboration is made possible by an…

  6. Community Radiation Monitoring Program

    International Nuclear Information System (INIS)

    Cooper, E.N.

    1993-05-01

    The Community Radiation Monitoring Program (CRMP) is a cooperative effort between the US Department of Energy (DOE); the US Environmental Protection Agency (EPA); the Desert Research Institute (DRI), a division of the University and Community College System of Nevada and the Nuclear Engineering Laboratory of the University of Utah (UNEL). The twelfth year of the program began in the fall of 1991, and the work continues as an integral part of the DOE-sponsored long-term offsite radiological monitoring effort that has been conducted by EPA and its predecessors since the inception of nuclear testing at the Nevada Test Site (NTS). The program began as an outgrowth of activities that occurred during the Three Mile Island incident in 1979. The local interest and public participation that took place there were thought to be transferrable to the situation at the NTS, so, with adaptations, that methodology was implemented for this program. The CRMP began by enhancing and centralizing environmental monitoring and sampling equipment at 15 communities in the existing EPA monitoring network, and has since expanded to 19 locations in Nevada, Utah and California. The primary objectives of this program are still to increase the understanding by the people who live in the area surrounding the NTS of the activities for which DOE is responsible, to enhance the performance of radiological sampling and monitoring, and to inform all concerned of the results of these efforts. One of the primary methods used to improve the communication link with people in the potentially impacted area has been the hiring and training of local citizens as station managers and program representatives in those selected communities in the offsite area. These managers, active science teachers wherever possible, have succeeded, through their training, experience, community standing, and effort, in becoming a very visible, able and valuable asset in this link

  7. Leveraging disjoint communities for detecting overlapping community structure

    International Nuclear Information System (INIS)

    Chakraborty, Tanmoy

    2015-01-01

    Network communities represent mesoscopic structure for understanding the organization of real-world networks, where nodes often belong to multiple communities and form overlapping community structure in the network. Due to non-triviality in finding the exact boundary of such overlapping communities, this problem has become challenging, and therefore huge effort has been devoted to detect overlapping communities from the network.In this paper, we present PVOC (Permanence based Vertex-replication algorithm for Overlapping Community detection), a two-stage framework to detect overlapping community structure. We build on a novel observation that non-overlapping community structure detected by a standard disjoint community detection algorithm from a network has high resemblance with its actual overlapping community structure, except the overlapping part. Based on this observation, we posit that there is perhaps no need of building yet another overlapping community finding algorithm; but one can efficiently manipulate the output of any existing disjoint community finding algorithm to obtain the required overlapping structure. We propose a new post-processing technique that by combining with any existing disjoint community detection algorithm, can suitably process each vertex using a new vertex-based metric, called permanence, and thereby finds out overlapping candidates with their community memberships. Experimental results on both synthetic and large real-world networks show that PVOC significantly outperforms six state-of-the-art overlapping community detection algorithms in terms of high similarity of the output with the ground-truth structure. Thus our framework not only finds meaningful overlapping communities from the network, but also allows us to put an end to the constant effort of building yet another overlapping community detection algorithm. (paper)

  8. Handling Pressures of Community Logic

    DEFF Research Database (Denmark)

    Minbaeva, Dana; Hotho, Jasper; Muratbekova-Touron, Maral

    2013-01-01

    The paper aims at investigating how in pluralistic societies, such as emerging economies and countries in transition, organizational decision-makers respond to pressures of community logics in non-community settings, such as the work place. We theorize that in non-community settings, social...... relations and interactions with community members can act as social cues that induce and expose individuals to community logics. We subsequently propose that properties of these relations – immediacy and relatedness - will affect individual response strategies towards community logics. We test these ideas...... with an experimental vignette study of the effects of clan and kinship ties on recruitment and selection decisions in Kazakhstan, followed by qualitative interviews....

  9. Community Cookbooks: Sponsors of Literacy and Community Identity

    Science.gov (United States)

    Mastrangelo, Lisa

    2015-01-01

    This article looks at the various ways that communities can be "read" through their cookbooks. Recipes and collections can reveal much about communities, including shared memories/traditions, geographical identifications, and representations of class.

  10. Community Satisfaction in Czech Rural Communities: A Multilevel Model

    Czech Academy of Sciences Publication Activity Database

    Bernard, Josef

    2015-01-01

    Roč. 55, č. 2 (2015), s. 205-226 ISSN 0038-0199 Institutional support: RVO:68378025 Keywords : community satisfaction * rural communities * contextual effects Subject RIV: AO - Sociology , Demography Impact factor: 1.380, year: 2015

  11. Renewal strategy and community based organisations in community ...

    African Journals Online (AJOL)

    Renewal strategy and community based organisations in community ... the local population and resources to do that which the governments had failed to do. ... country with a view to reducing poverty and developmental imbalance in Nigeria.

  12. Community Solar Value Project

    Energy Technology Data Exchange (ETDEWEB)

    Powers, John T [Extensible Energy; Cliburn, Jill [Cliburn and Associates

    2017-11-30

    The Community Solar Value Project (CSVP) is designed to assist electric utilities in designing better community solar programs. Better programs seek new sources of value to promote “win-win” solutions between utilities and their customers. The CSVP focused on five “challenge areas” in identifying new sources of value: - Strategic solar design for community solar projects (including technology choices, siting, orientation, and related issues) - Market research and targeted marketing approaches (for program design and for customer recruitment) - Procurement and financing (for establishing best practices that can bring economies of scale and economies of expertise) - Integration of “companion measures” (such as storage and demand-response options that can benefit customer and utility net load shapes) - Pricing in program design (including best practices for integration of identified value in program prices or credits) The CSVP directly engaged the Sacramento Municipal Utility District (SMUD), the Public Service Company of New Mexico (PNM), and more than a dozen other utilities to develop improved community solar program designs. The outcomes include a plan at SMUD for over 100 MW or more of community and shared solar and support for new or expanded programs at 15 other utilities so far. Resulting best-practice solutions have not only informed program applications, but also have generated discussion among experts and industry associations about the new opportunities and challenges CSVP has brought forth. In these ways, the CSVP has impacted community solar programs and DER plans, competitive innovations and policies nationwide. The CSVP team has been led by Extensible Energy under John Powers, President and CEO. Jill Cliburn, of Santa Fe, NM-based Cliburn and Associates, has served as Principal Investigator. The team also benefitted from expertise from Navigant, Olivine Inc. and Millennium Energy, LLC, in addition to the collaborative and cost

  13. Community interventions for cardiovascular disease.

    Science.gov (United States)

    Parker, Donna R; Assaf, Annlouise R

    2005-12-01

    Review of the community-based CVD intervention programs suggests that a number of components have been successful using varying methods and materials for CVD risk reduction. It should be noted, however, that in multi-intervention programs it is often difficult to determine which components of the intervention were responsible for the overall success of the study. The community-based approach to CVD prevention is generalizable, cost-effective (because of the use of mass communication methods), and has the potential for modifying the environment and influencing health policies. Based on the experiences and successes of a number of community projects, recommendations have been proposed for developing future programs. Although they are not totally comprehensive, it has been suggested that a community-based intervention program should consider the following recommendations: 1) An understanding of the community: the needs and priorities of the community should be assessed, and close collaboration with individuals from the community, including community leaders, opinion leaders, community health care providers, and community organizations from various sectors of the community, should be consulted. Efforts should be focused on underserved and vulnerable populations. 2) Inclusion of community activities: these activities should be integrated within the context of the community environment, including primary health care services, voluntary organizations, grocery stores, restaurants, work sites, schools, and local media. 3) Inclusion mass media messages: the mass media can provide information and reinforcement of the behavior change. 4) Develop cost-effective interventions to assure that the community is exposed to an effective dose of the intervention. 5) Work with community organizations to help change social and physical environments to make them more conducive to health and healthy life-styles changes. 6) Develop a reliable monitoring and evaluation system: monitor the

  14. Evaluating Community Partnerships Addressing Community Resilience in Los Angeles, California

    Directory of Open Access Journals (Sweden)

    Malcolm V. Williams

    2018-03-01

    Full Text Available Community resilience has grown in importance in national disaster response and recovery efforts. However, measurement of community resilience, particularly the content and quality of relationships aimed at improving resilience, is lacking. To address this gap, we used a social network survey to measure the number, type, and quality of relationships among organizations participating in 16 coalitions brought together to address community resilience in the Los Angeles Community Disaster Resilience project. These coalitions were randomized to one of two approaches (community resilience or preparedness. Resilience coalitions received training and support to develop these partnerships and implement new activities. Both coalition types received expert facilitation by a public health nurse or community educator. We also measured the activities each coalition engaged in and the extent to which partners participated in these activities at two time points. We found that the community resilience coalitions were initially larger and had lower trust among members than the preparedness communities. Over time, these trust differences dissipated. While both coalitions grew, the resilience community coalitions maintained their size difference throughout the project. We also found differences in the types of activities implemented by the resilience communities; these differences were directly related to the trainings provided. This information is useful to organizations seeking guidance on expanding the network of community-based organizations that participate in community resilience activities.

  15. IT User Community Survey

    CERN Document Server

    Peter Jones (IT-CDA-WF)

    2016-01-01

    IT-CDA is gathering information to more accurately form a snapshot of the CERN IT user community and we would appreciate you taking time to complete the following survey.   We want to use this survey to better understand how the user community uses their devices and our services, and how the delivery of those services could be improved. You will need to authenticate to complete the survey. However please note that your responses are confidential and will be compiled together and analysed as a group. You can also volunteer to offer additional information if you so wish. This survey should take no longer than 5 minutes. Thanks in advance for your collaboration.

  16. [Identification of community leaders].

    Science.gov (United States)

    Chevalier, S; Dedobbeleer, N; Tremblay, M

    1995-01-01

    Although many methods of measuring leadership have been developed in sociological studies, there are few articles on the feasibility of these methods. The goal of this study was to verify the feasibility of the "modified positional-reputational approach" developed by Nix. The study was conducted in a small community located north of Montreal. Nix's questionnaire was translated, adapted and administered to 49 key informants. Two hundred and fourteen leaders were selected. Three types of leaders were identified: the legitimizers, the effectors and the activists. Through a sociometric analysis, we established links between the different leaders and we described the power structure of the community. Despite a few shortcomings, Nix's approach was found extremely useful.

  17. Community-acquired pneumonia.

    Science.gov (United States)

    Falguera, M; Ramírez, M F

    2015-11-01

    This article not only reviews the essential aspects of community-acquired pneumonia for daily clinical practice, but also highlights the controversial issues and provides the newest available information. Community-acquired pneumonia is considered in a broad sense, without excluding certain variants that, in recent years, a number of authors have managed to delineate, such as healthcare-associated pneumonia. The latter form is nothing more than the same disease that affects more frail patients, with a greater number of risk factors, both sharing an overall common approach. Copyright © 2015 Elsevier España, S.L.U. y Sociedad Española de Medicina Interna (SEMI). All rights reserved.

  18. A Professional Learning Community Journey

    Directory of Open Access Journals (Sweden)

    Diana Maliszewski

    2008-06-01

    Full Text Available Four teachers (three classroom teachers and a teacher-librarian explain how their school applied a professional learning community framework to its operational practices. They discuss the process, the benefits, and the challenges of professional learning communities.

  19. Service Station for the Community

    Science.gov (United States)

    Fulk, Margaret E.; Blank, Gordon C.

    1977-01-01

    Western Piedmont Community College adopted the concept of a people-oriented Learning Resources Center with services offered to the entire college community through a learning laboratory, audiovisual center and library. (JG)

  20. COMMUNITY MEDICINE & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    Background:Community Based Health Insurance Scheme is a social service organized at community level. It is a mutual health ... As part of her corporate social responsibility. Shell in .... Schmidt J. The benefits and challenges of shows the ...

  1. Community Resources and Job Placement

    Science.gov (United States)

    Preston, Jim

    1977-01-01

    In cooperation with the chamber of commerce, various businesses, associations, and other community agencies, the Sarasota schools (Florida) supplement their own job placement and follow-up efforts with community job development strategies for placing high school graduates. (JT)

  2. Mapping earthworm communities in Europe

    NARCIS (Netherlands)

    Rutgers, M.; Orgiazzi, A.; Gardi, C.; Römbke, J.; Jansch, S.; Keith, A.; Neilson, R.; Boag, B.; Schmidt, O.; Murchie, A.K.; Blackshaw, R.P.; Pérès, G.; Cluzeau, D.; Guernion, M.; Briones, M.J.I.; Rodeiro, J.; Pineiro, R.; Diaz Cosin, D.J.; Sousa, J.P.; Suhadolc, M.; Kos, I.; Krogh, P.H.; Faber, J.H.; Mulder, C.; Bogte, J.J.; Wijnen, van H.J.; Schouten, A.J.; Zwart, de D.

    2016-01-01

    Existing data sets on earthworm communities in Europe were collected, harmonized, collated, modelled and depicted on a soil biodiversity map. Digital Soil Mapping was applied using multiple regressions relating relatively low density earthworm community data to soil characteristics, land use,

  3. The invertebrate communities

    International Nuclear Information System (INIS)

    FloBner, D.; Kasprzak, P.; Mothes, G.; Ronneberger, D.; Schonborn, W.

    1985-01-01

    Studies of invertebrate communities have been carried out to a certain extent in the whole Lake Stechlin area, but especially with reference to Lake Stechlin. The chapter summarizes important results of detailed investigations over a long period, made by several researchers in the periods before and after the nuclear power plant came into operation. The following sections deal with the combination of species, frequency, types of life-form, structure and dynamics of the living community of zoobenthos and zooplankton. Not dealt with or only considered in passing are Amoebina, Heliozoa, Ciliata, Turbellaria (excl. Tricladida), Nematoda, Tardigrada, Gastrotricha, and partly Oligochaeta. The research into micro-and meiooobenthos are limited to the years 1959-1968. Data after the bringing into operation of the nuclear power plant refer only to macrozoobenthos. Before the operation of the nuclear power plant the planktonic Rotaroria and Crustacea were examined only qualitatively. The first quantitative analysis of the zooplankton-community was undertaken in 1968, and only from 1978 onwards has continuous and comprehensive research information about the zooplankton in Lake Stechlin been available

  4. Community Radiation Monitoring Program

    International Nuclear Information System (INIS)

    Lucas, R.P. Jr.; Cooper, E.N.; McArthur, R.D.

    1990-05-01

    The Community Radiation Monitoring Program began its ninth year in the summer of 1989, continuing as an essential portion of the Environmental Protection Agency's long-standing off-site monitoring effort. It is a cooperative venture between the Department of Energy (DOE), the Environmental Protection Agency (EPA), the University of Utah (U of U), and the Desert Research Institute (DRI) of the University of Nevada System. The objectives of the program include enhancing and augmenting the collection of environmental radiation data at selected sites around the Nevada Test Site (NTS), increasing public awareness of that effort, and involving, in as many ways as possible, the residents of the off-site area in these and other areas related to testing nuclear weapons. This understanding and improved communication is fostered by hiring residents of the communities where the monitoring stations are located as program representatives, presenting public education forums in those and other communities, disseminating information on radiation monitoring and related subjects, and developing and maintaining contacts with local citizens and elected officials in the off-site areas. 8 refs., 4 figs., 4 tabs

  5. Can community carers cope?

    Science.gov (United States)

    1989-07-01

    Acquired immunodeficiency syndrome (AIDS) leads to severe social, psychological, and financial consequences for affected families and communities. In response to this stress, service organizations in both developed and developing countries are providing support both to People with AIDS (PWAs) and to their caregivers. In New York, for example, Gay Men's Health Crisis volunteers visit PWAs in hospitals, assist PWAs after discharge with daily chores such as shopping and getting to medical appointments, and provide psychological support through peer and group counseling. The 1st self-help group in Africa, Uganda's AIDS Service Organization (TASO), was established by the widow of an AIDS victim in response to the abandonment of many PWAs by their families. TASO helps families with the practical and financial burdens of caring for AIDS patients, seeks to overcome the fears and misconceptions surrounding the disease, operates a center where those infected with the AIDS virus can gather, and offers income-generating opportunities to PWAs. In the Kagera region of Tanzania, where at least 4000 children have been orphaned by AIDS, villages have allocated community funds for the needs of these children. Other voluntary organizations have focused on providing legal advice to PWAs who have faced discrimination in the workplace or in housing. The World Health Organization's Global Program on AIDS has reiterated its commitment to work with community-based organizations.

  6. Modern community care program

    International Nuclear Information System (INIS)

    Nordin, Staffan

    2000-01-01

    Going into the next millennium do we see nuclear energy? Yes we will see an expanding nuclear sector in the modem community. he modem community that cares for people, health and environment needs nuclear. Energy saves lives. Electricity is efficient use of energy. Energy will be the key to a sustainable society, energy is life. Nuclear energy protects the environment. Nuclear is an integral part of the modern community caring for people, health and environment. The dynamics of the public opinion-forming process and its effects on the nuclear industry are a challenge of the global nuclear industry. Current communications strategy and its consequences are on of the key issues. The nuclear industry must be perceived in certain ways in order to move towards achieving the vision and avoiding the harassment scenario. Each perception goal does not bear the same function within the communications process. As the nuclear industry is oe of the keys to a sustainable society, it must achieve legitimacy in its capacity as an interesting agenda-setter for tackling problems and as an expert. We have to build our communication activities on an open and honest attitude and we have to establish trust and confidence. The nuclear industry must also prove its ability and performance. If this could be achieved there will be an option for the future

  7. Report to the community

    International Nuclear Information System (INIS)

    Braungart, S.; Ripley, M.

    2001-10-01

    In this document, Petro-Canada reports to the stakeholders on non-financial issues that have an impact on the communities in which the company operates. It is the first such annual report. The document touches environmental performance measures, the company's commitment and involvement in the various communities where it has a presence, health and safety, high-performance work environment for the employees, as well as business principles that guide the making of decisions. Some basic information concerning Petro-Canada is presented, followed by an overview of the corporate responsibility. The next section of the report is concerned with the environment. It is further divided into categories such as energy, air quality, water quality, regulatory compliance, environmental investments, waste management, and product quality. The section devoted to employee well-being addresses the work environment, and health and safety. The values and ethical decision-making are discussed in the next section, including the code of business conduct, corporate values, criteria for ethical decision-making, relationship with suppliers and business associates, community investment. The major growth areas, like Newfoundland, Northern Alberta, the Mackenzie Delta all benefit from a special sub-section that brushes on the major accomplishments. The report concludes by a statement concerning the contribution made by Petro-Canada to the Canadian economy. figs

  8. Nuclear disassembly time scales using space time correlations

    Energy Technology Data Exchange (ETDEWEB)

    Durand, D.; Colin, J.; Lecolley, J.F.; Meslin, C.; Aboufirassi, M.; Bougault, R.; Brou, R. [Caen Univ., 14 (France). Lab. de Physique Corpusculaire; Bilwes, B.; Cosmo, F. [Strasbourg-1 Univ., 67 (France); Galin, J. [Grand Accelerateur National d`Ions Lourds (GANIL), 14 - Caen (France); and others

    1996-09-01

    The lifetime, {tau}, with respect to multifragmentation of highly excited nuclei is deduced from the analysis of strongly damped Pb+Au collisions at 29 MeV/u. The method is based on the study of space-time correlations induced by `proximity` effects between fragments emitted by the two primary products of the reaction and gives the time between the re-separation of the two primary products and the subsequent multifragment decay of one partner. (author). 2 refs.

  9. Learning in the "Platform Society": Disassembling an Educational Data Assemblage

    Science.gov (United States)

    Williamson, Ben

    2017-01-01

    Schools are increasingly involved in diverse forms of student data collection. This article provides a sociotechnical survey of a data assemblage used in education. ClassDojo is a commercial platform for tracking students' behaviour data in classrooms and a social media network for connecting teachers, students, and parents. The hybridization of…

  10. Supermassive Black Holes and Their Host Spheroids. I. Disassembling Galaxies

    Science.gov (United States)

    Savorgnan, G. A. D.; Graham, A. W.

    2016-01-01

    Several recent studies have performed galaxy decompositions to investigate correlations between the black hole mass and various properties of the host spheroid, but they have not converged on the same conclusions. This is because their models for the same galaxy were often significantly different and not consistent with each other in terms of fitted components. Using 3.6 μm Spitzer imagery, which is a superb tracer of the stellar mass (superior to the K band), we have performed state-of-the-art multicomponent decompositions for 66 galaxies with directly measured black hole masses. Our sample is the largest to date and, unlike previous studies, contains a large number (17) of spiral galaxies with low black hole masses. We paid careful attention to the image mosaicking, sky subtraction, and masking of contaminating sources. After a scrupulous inspection of the galaxy photometry (through isophotal analysis and unsharp masking) and—for the first time—2D kinematics, we were able to account for spheroids large-scale, intermediate-scale, and nuclear disks bars rings spiral arms halos extended or unresolved nuclear sources; and partially depleted cores. For each individual galaxy, we compared our best-fit model with previous studies, explained the discrepancies, and identified the optimal decomposition. Moreover, we have independently performed one-dimensional (1D) and two-dimensional (2D) decompositions and concluded that, at least when modeling large, nearby galaxies, 1D techniques have more advantages than 2D techniques. Finally, we developed a prescription to estimate the uncertainties on the 1D best-fit parameters for the 66 spheroids that takes into account systematic errors, unlike popular 2D codes that only consider statistical errors.

  11. SUPERMASSIVE BLACK HOLES AND THEIR HOST SPHEROIDS. I. DISASSEMBLING GALAXIES

    Energy Technology Data Exchange (ETDEWEB)

    Savorgnan, G. A. D.; Graham, A. W., E-mail: gsavorgn@astro.swin.edu.au [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, Hawthorn, Victoria 3122 (Australia)

    2016-01-15

    Several recent studies have performed galaxy decompositions to investigate correlations between the black hole mass and various properties of the host spheroid, but they have not converged on the same conclusions. This is because their models for the same galaxy were often significantly different and not consistent with each other in terms of fitted components. Using 3.6 μm Spitzer imagery, which is a superb tracer of the stellar mass (superior to the K band), we have performed state-of-the-art multicomponent decompositions for 66 galaxies with directly measured black hole masses. Our sample is the largest to date and, unlike previous studies, contains a large number (17) of spiral galaxies with low black hole masses. We paid careful attention to the image mosaicking, sky subtraction, and masking of contaminating sources. After a scrupulous inspection of the galaxy photometry (through isophotal analysis and unsharp masking) and—for the first time—2D kinematics, we were able to account for spheroids; large-scale, intermediate-scale, and nuclear disks; bars; rings; spiral arms; halos; extended or unresolved nuclear sources; and partially depleted cores. For each individual galaxy, we compared our best-fit model with previous studies, explained the discrepancies, and identified the optimal decomposition. Moreover, we have independently performed one-dimensional (1D) and two-dimensional (2D) decompositions and concluded that, at least when modeling large, nearby galaxies, 1D techniques have more advantages than 2D techniques. Finally, we developed a prescription to estimate the uncertainties on the 1D best-fit parameters for the 66 spheroids that takes into account systematic errors, unlike popular 2D codes that only consider statistical errors.

  12. SUPERMASSIVE BLACK HOLES AND THEIR HOST SPHEROIDS. I. DISASSEMBLING GALAXIES

    International Nuclear Information System (INIS)

    Savorgnan, G. A. D.; Graham, A. W.

    2016-01-01

    Several recent studies have performed galaxy decompositions to investigate correlations between the black hole mass and various properties of the host spheroid, but they have not converged on the same conclusions. This is because their models for the same galaxy were often significantly different and not consistent with each other in terms of fitted components. Using 3.6 μm Spitzer imagery, which is a superb tracer of the stellar mass (superior to the K band), we have performed state-of-the-art multicomponent decompositions for 66 galaxies with directly measured black hole masses. Our sample is the largest to date and, unlike previous studies, contains a large number (17) of spiral galaxies with low black hole masses. We paid careful attention to the image mosaicking, sky subtraction, and masking of contaminating sources. After a scrupulous inspection of the galaxy photometry (through isophotal analysis and unsharp masking) and—for the first time—2D kinematics, we were able to account for spheroids; large-scale, intermediate-scale, and nuclear disks; bars; rings; spiral arms; halos; extended or unresolved nuclear sources; and partially depleted cores. For each individual galaxy, we compared our best-fit model with previous studies, explained the discrepancies, and identified the optimal decomposition. Moreover, we have independently performed one-dimensional (1D) and two-dimensional (2D) decompositions and concluded that, at least when modeling large, nearby galaxies, 1D techniques have more advantages than 2D techniques. Finally, we developed a prescription to estimate the uncertainties on the 1D best-fit parameters for the 66 spheroids that takes into account systematic errors, unlike popular 2D codes that only consider statistical errors

  13. Functional and cosmetic outcome of partial penile disassembly ...

    African Journals Online (AJOL)

    A. Bhat

    2017-07-04

    Jul 4, 2017 ... Technique: Penile de-gloving with mobilization of urethral plate from ventral to dorsal ... BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). ..... Literature search , Clinical studies, Experimental studies, Data.

  14. Will biofilm disassembly agents make it to market?

    Science.gov (United States)

    Romero, Diego; Kolter, Roberto

    2011-07-01

    Nearly 12 years after promising results suggested that antibiofilm agents might be developed into novel therapeutics, there are no such products on the market. In our opinion, the reasons for this have been predominantly economic. Recent developments, however, suggest that there could still be emerging opportunities for the developments of such products. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. Energy impacts of recycling disassembly material in residential buildings

    International Nuclear Information System (INIS)

    Gao, Weijun; Ariyama, Takahiro; Ojima, Toshio; Meier, Alan

    2000-01-01

    In order to stop the global warmth due to the CO2 concentration, the energy use should be decreased. The investment of building construction industry in Japan is about 20 percent of GDP. This fraction is much higher than in most developed countries. That results the Japanese building construction industry including residential use consumes about one third of all energy and resources of the entire industrial sectors. In order to save energy as well as resource, the recycle of the building materials should be urgent to be carried out. In this paper, we focus on the potential energy savings with a simple calculated method when the building materials or products are manufactured from recycled materials. We examined three kinds of residential buildings with different construction techniques and estimated the decreased amount of energy consumption and resources resulting from use of recycled materials. The results have shown for most building materials, the energy consumption needed to remake housing materials from recycled materials is lower than that to make new housing materials. The energy consumption of building materials in all case-study housing can be saved by at least 10 percent. At the same time, the resource, measured by mass of building materials (kg) can be decreased by over 50 percent

  16. SP-100 reactor disassembly remote handling test program

    International Nuclear Information System (INIS)

    Wilson, C.E.; Potter, J.D.; Maiden, G.E.; Vader, D.P.

    1991-01-01

    This paper is presented as an overview of the remote handling equipment validation testing, which will be conducted before installation and use in the ground engineering test facility. This equipment will be used to defuel the SP-100 reactor core after removing it from the Test Assembly following nuclear testing. A series of full scale mock-up operational tests will be conducted at a Hanford Site facility to verify equipment design, operation, and capabilities

  17. Application of laser processing for disassembly of nuclear power plants

    Science.gov (United States)

    Baranov, Gennady A.; Zinchenko, A. V.; Arutyunyan, R. B.

    1998-12-01

    Provision of safety and drop of ecological risk at salvaging of nuclear submarines (NSM) of Russia Navy Forces represents one of the most actual problems of nowadays. It is necessary to remove from services of Russian Navy Forces 170 - 180 nuclear submarines by 2000. At salvaging of Russian Navy Forces NSM it should be necessary to cut out reactor compartments with more than 150 thousand tons of gross weight and to fragment terminal carcasses of submarines with gross weight of 2 million tons. Taking into account overall dimensions of salvaging objects and Euro-standard requirement on the sizes of carcass fragments, for salvaging of one NSM it is necessary to execute more than 10 km of cuts. Using of conventional methods of gas and plasma cutting of ship constructions and equipment polluted with radioactive oxides and bedding of insulation and paint and varnish materials causes contamination of working zones and environment by a mix of radioactive substances and highly toxic combustion products, nomenclature of which includes up to 50 names. Calculations carried out in the Institute of industrial and Marine Medicine have shown that salvage of just one NSM with using of gas and plasma cutting are accompanied by discharge into an environment of up to 11.5 kg of chromium oxides, up to 22.5 kg of manganese oxides, up to 97 kg of carbon oxides and up to 650 kg of nitrogen oxides. Fragmentation of such equipment by a method of directional explosion or hydraulic jet is problematic because of complexity of treated constructions and necessity to create special protective facilities, which will accumulate a bulk of radioactive and toxic discharges, as a consequence of the explosion and spreaded by shock waves and water deluges. In a number of new technological processes the cutting with using of high-power industrial lasers radiation stands out. As compared with other technological processes, laser cutting has many advantages determined by such unique properties of laser radiation as large power, capability to concentrate power on the small area (up to 108 W/cm2), good spatial and temporal controllability. The laser cutting advantages are the following: (1) high efficiency; (2) capability to cut various materials (metals, alloys, plastics, rubber, ceramics) and their compositions (fiber glass plastics, rubber-plastics, cermets) by one installation; (3) minimum pollution in gas and condensed phases; (4) high degree of technological process automation; (5) remote character of cutting and personnel absence in a processing zone.

  18. Shape Formation by Self-Disassembly in Programmable Matter Systems

    Science.gov (United States)

    2012-06-01

    classifying modular robotic systems by the geometry of the system: chain, lattice, truss, or free form. For a more detailed history of the modular...Both the source and destination of a UDP packet are specified by a address/port pair. An address is a typical IPv4 address such as 18.70.0.160 while a... IPv4 network, the simulated modules can be located on any machine that is connected to the network. If the user wants to simulate a large system, it

  19. Nuclear disassembly time scales using space time correlations

    International Nuclear Information System (INIS)

    Durand, D.; Colin, J.; Lecolley, J.F.; Meslin, C.; Aboufirassi, M.; Bougault, R.; Brou, R.; Galin, J.; and others.

    1996-01-01

    The lifetime, τ, with respect to multifragmentation of highly excited nuclei is deduced from the analysis of strongly damped Pb+Au collisions at 29 MeV/u. The method is based on the study of space-time correlations induced by 'proximity' effects between fragments emitted by the two primary products of the reaction and gives the time between the re-separation of the two primary products and the subsequent multifragment decay of one partner. (author)

  20. Binary Disassembly Block Coverage by Symbolic Execution vs. Recursive Descent

    Science.gov (United States)

    2012-03-01

    softmmu/qemu $S2E - hda debian_lenny_i386_standard.qcow2 -loadvm 1 86 B.7 launch-x86 Description: Written in shell scripting code, launches the S2E...Also loads the previous snapshot of this disk image if there is one. #!/bin/sh S2E=/home/s2e/s2e/build/qemu-release/i386-s2e-softmmu/qemu $S2E - hda

  1. Charge correlations as a probe of nuclear disassembly

    International Nuclear Information System (INIS)

    Kreutz, P.; Pochodzalla, J.; Schuettauf, A.; Tucholski, A.; Bouissou, P.; Leray, S.; Seidel, W.; Begemann-Blaich, M.; Hubele, J.; Kunde, G.J.; Lindenstruth, V.; Liu, Z.; Lynen, U.; Meijer, R.J.; Milkau, U.; Mueller, W.F.J.; Ogilvie, C.A.; Sann, H.; Trautmann, W.

    1992-03-01

    We have studied multi-fragment decays of Au projectiles after collision with C, Al, Cu and Pb targets at a bombarding energy of 600 MeV/nucleon. We examine the correlations between the charges emitted in these reactions. These correlations are given as a function of the total charge in bound fragments, Z bound , at forward angles, which is a measure of the violence of the collision and can be related to the impact parameter. The charge distributions have been fit by a power law and the extracted τ parameter exhibits a minimum as a function of Z bound . We observe a strong reduction in the maximum charge, Z max , of the event with decreasing Z bound . For those events where Z max is less than half Z bound , the relative sizes of the two largest charges within the event cover the full spectrum of possibilities. The charge-Dalitz plots indicate that the multi-fragmentation events are not an extension of symmetric fission reactions. The event-by-event charge moments are examined to measure the size of the charge fluctuations. All of the charge correlations are independent of the target when plotted as a function of Z bound . The results are compared to both nuclear statistical and percolation calculations. The model predictions differ from each other, establishing that the observables are sensitive to how the available phase space is populated. The sequential nuclear model predicts too asymmetric a decay, while the simultaneous model predicts too symmetrical a break-up. The percolation model, which was adjusted to reproduce the mean multiplicity of fragments and the size of Z max , correctly predicts the charge fluctuations. (orig.)

  2. Method of assembling and disassembling a control component structure

    International Nuclear Information System (INIS)

    Edwards, G.T.; Schluderberg, D.C.

    1982-01-01

    A technique is provided for engaging and disengaging burnable poison rods from the spider in a fuel assembly. The cap on the end of each of the burnable poison rods is provided with a shank that is received in the respective bore formed in the spider. A frangible flange secures the shank and rod to the spider. Pressing the shank in the direction of the bore axis ruptures the frangible flange to release the rod from the spider

  3. [Community Service Program, Westmont College.

    Science.gov (United States)

    Kistler, Christina

    This report describes a 2-year project at Westmont College, California, which established a Community Service Program with the purposes of decreasing student debt and increasing student participation in community organizations. Eligible students worked 8-10 hours per week for a qualified community agency and received credit towards tuition for the…

  4. Cooking up an Online Community

    Science.gov (United States)

    Valone, Lauren

    2011-01-01

    As museum professionals conceptualize community building, they must now consider the virtual realm. Websites in and of themselves will not generate a community, as it takes sustained communication and interaction by staff to encourage growth. Online communities are complex forces that bring about systematic dualities that in turn stimulate…

  5. The Power of Community Schools

    Science.gov (United States)

    Capers, Natasha; Shah, Shital C.

    2015-01-01

    In this article, Shital Shah, who supports community schools as assistant director for educational issues at the American Federation of Teachers, and Natasha Capers, a coordinator for the New York City Coalition for Educational Justice (CEJ), a parent-led collaborative of unions and community organizations, discuss the community schools movement…

  6. Building a Just Adolescent Community

    Science.gov (United States)

    Enright, Mary Schaefer; Schaefer, Lawrence V.; Schaefer, Patricia S.; Schaefer, Kristin A.

    2008-01-01

    Lawrence Kohlberg, a psychologist, coined the term "Just Community" to describe a community built on trust and resolution, in which each member participates democratically in the development of the rules and regulations that govern their community life (Kohlberg, 1985). In a school, this means that students and teachers alike actively participate…

  7. Community gardening and social cohesion

    NARCIS (Netherlands)

    Veen, E.J.; Bock, B.B.; Berg, Van den W.; Visser, A.J.; Wiskerke, J.S.C.

    2016-01-01

    Community gardens vary in several ways: they are cultivated by different kinds of communities in various locations, entail individual or communal plots and the extent of active participation (e.g. gardening) differs. In this paper, we study seven community gardens with varying organisational

  8. Enhancing Community Service Learning Via Practical Learning Communities

    Directory of Open Access Journals (Sweden)

    Ilana Ronen

    2015-02-01

    Full Text Available The advantages of learning communities focused on analyzing social issues and educational repercussions in the field are presented in this study. The research examines the contribution of a learning community to enhancing student teachers' responsibility and their social involvement. The assumption was that participating in learning community would further implement student teachers' community social involvement while enhancing responsibility in their field of action. A questionnaire aimed to present the student teachers' attitudes involving all aspects of studying in the learning community and their social activity in the community was conducted. The findings pinpointed that there were positive contributions of the learning communities from a personal aspect such as developing self-learning, and learning about “me”, as well as broaden their teaching skills, through methodology for teacher training, and developing reflective thought. These insights can also be implemented in various educational frameworks and during service learning as part of teacher training.

  9. Community interaction and child maltreatment.

    Science.gov (United States)

    Kim, Bomi; Maguire-Jack, Kathryn

    2015-03-01

    The way in which parents interact with their environment may have implications for their likelihood of abuse and neglect. This study examines the parent-environment relationship through community involvement and perception, using social disorganization theory. We hypothesize mothers who participate in their communities and have positive perceptions of them may be less likely to maltreat their children because of the potential protective capacity of neighborhood supports. Using information from the 5 year Fragile Families and Child Wellbeing Study (n=2991), the mother's self-reported acts of psychological and physical maltreatment and neglect are measured. A mother's community involvement index is the number of community activities a mother was involved in, and community perception is measured by two five-item Likert scales assessing perception of community collective efficacy. We analyze the relationship between community variables and each of mother's maltreatment behaviors as well as the interaction between community factors using a series of nested logistic regressions. Higher levels of community involvement are associated with lower levels of psychological aggression. More positive perception of community social control is associated with lower levels of physical assault. A moderation effect of community perception suggests that a mother's perception of her community changes the relationship between community involvement and psychological child abuse. The results provide important policy and empirical implications to build positive and supportive communities as a protective factor in child maltreatment. Getting parents involved in their communities can improve the environment in which children and families develop, and decrease the likelihood that maltreatment will occur. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Integrating Community into the Classroom: Community Gardening, Community Involvement, and Project-Based Learning.

    Science.gov (United States)

    Langhout, Regina Day; Rappaport, Julian; Simmons, Doretha

    2002-01-01

    Culturally relevant, ongoing project-based learning was facilitated in a predominantly African American urban elementary school via a community garden project. The project involved teachers, students, university members, and community members. This article evaluates the project through two classroom-community collaboration models, noting common…

  11. The Entrepreneurial Community College: Bringing Workforce, Economic and Community Development to Virginia Community Colleges.

    Science.gov (United States)

    Drury, Richard L.

    2001-01-01

    Proposes creating an entrepreneurial college within the community college that will offer non-credit courses to the community and workforce. States that the courses would focus on the training needs of community industry, with the employer as the customer, rather than the student. Adds that the proposed college would also focus on community…

  12. Sharing Resources in Educational Communities

    Directory of Open Access Journals (Sweden)

    Anoush Margarayn

    2010-06-01

    Full Text Available The paper explores the implications of mobility within educational communities for sharing and reuse of educational resources. The study begins by exploring individuals’ existing strategies for sharing and reusing educational resources within localised and distributed communities, with particular emphasis on the impact of geographic location on these strategies. The results indicate that the geographic distribution of communities has little impact on individuals’ strategies for resource management, since many individuals are communicating via technology tools with colleagues within a localised setting. The study points to few major differences in the ways in which individuals within the localised and distributed communities store, share and collaborate around educational resources. Moving beyond the view of individuals being statically involved in one or two communities, mobility across communities, roles and geographic location are formulated and illustrated through eight scenarios. The effects of mobility across these scenarios are outlined and a framework for future research into mobility and resource sharing within communities discussed.

  13. Community Psychology and Community Mental Health: A Call for Reengagement.

    Science.gov (United States)

    Townley, Greg; Brown, Molly; Sylvestre, John

    2018-03-01

    Community psychology is rooted in community mental health research and practice and has made important contributions to this field. Yet, in the decades since its inception, community psychology has reduced its focus on promoting mental health, well-being, and liberation of individuals with serious mental illnesses. This special issue endeavors to highlight current efforts in community mental health from our field and related disciplines and point to future directions for reengagement in this area. The issue includes 12 articles authored by diverse stakeholder groups. Following a review of the state of community mental health scholarship in the field's two primary journals since 1973, the remaining articles center on four thematic areas: (a) the community experience of individuals with serious mental illness; (b) the utility of a participatory and cross-cultural lens in our engagement with community mental health; (c) Housing First implementation, evaluation, and dissemination; and (d) emerging or under-examined topics. In reflection, we conclude with a series of challenges for community psychologists involved in future, transformative, movements in community mental health. © Society for Community Research and Action 2018.

  14. Monitoring natural phytoplankton communities

    DEFF Research Database (Denmark)

    Haraguchi, L.; Jakobsen, H. H.; Lundholm, Nina

    2017-01-01

    -consuming and/or expensive, limiting sampling frequency. The use of faster methods, such as flow cytometry, has become more frequent in phytoplankton studies, although comparisons between this technique and traditional ones are still scarce. This study aimed to assess if natural phytoplankton communities...... carbon biomass with PFCM, applying the same conversion factors as for microscopy. Biomasses obtained with PFCM, estimated from live cells, were higher than microscopy for natural samples. We conclude that PFCM results are comparable to classical techniques, yet the data from PFCM had poor taxonomic...

  15. Community energy policy

    International Nuclear Information System (INIS)

    Redondo Melchor, N.; Redondo Quintela, F.

    1994-01-01

    The twelve Member states of the European Union will attempt to make their national energy policies converge. Nevertheless the basis of the so called ''Community Energy Policy'' is not this convergence but rather the achievement of a new internal market, the Energy Market, where sources and forms of energy may circulate freely between countries. This aim derives from a change of orientation, dating back some years, when market integration was attempted instead of continuing with the mere unification of national policies. In this paper we summarize the most relevant aspects of the liberalization process and give some of its internal and external repercussions on the European Union. (Author)

  16. Auditing Community Software Development

    Directory of Open Access Journals (Sweden)

    Mészáros Gergely

    2015-12-01

    Full Text Available In accordance with European efforts related to Critical Information Infrastructure Protection, in Hungary a special department called LRL-IBEK has been formed which is designated under the Disaster Management. While specific security issues of commercial applications are well understood and regulated by widely applied standards, increasing share of information systems are developed partly or entirely in a different way, by the community. In this paper different issues of the open development style will be discussed regarding the high requirements of Critical Information Infrastructures, and possible countermeasures will be suggested for the identified problems.

  17. International Journal of Web Based Communities

    DEFF Research Database (Denmark)

    2006-01-01

    Special Issue on Knowledge Communication, culture and communities of practice in web based communities. ......Special Issue on Knowledge Communication, culture and communities of practice in web based communities. ...

  18. Community Cloud Computing

    Science.gov (United States)

    Marinos, Alexandros; Briscoe, Gerard

    Cloud Computing is rising fast, with its data centres growing at an unprecedented rate. However, this has come with concerns over privacy, efficiency at the expense of resilience, and environmental sustainability, because of the dependence on Cloud vendors such as Google, Amazon and Microsoft. Our response is an alternative model for the Cloud conceptualisation, providing a paradigm for Clouds in the community, utilising networked personal computers for liberation from the centralised vendor model. Community Cloud Computing (C3) offers an alternative architecture, created by combing the Cloud with paradigms from Grid Computing, principles from Digital Ecosystems, and sustainability from Green Computing, while remaining true to the original vision of the Internet. It is more technically challenging than Cloud Computing, having to deal with distributed computing issues, including heterogeneous nodes, varying quality of service, and additional security constraints. However, these are not insurmountable challenges, and with the need to retain control over our digital lives and the potential environmental consequences, it is a challenge we must pursue.

  19. Towards sustainable urban communities

    International Nuclear Information System (INIS)

    Haapio, Appu

    2012-01-01

    Requirements for the assessment tools of buildings have increased, assessing of building components or separate buildings is not enough. Neighbourhoods, built environment, public transportations, and services, should be considered simultaneously. Number of population living in urban areas is high and increasing rapidly. Urbanisation is a major concern due to its detrimental effects on the environment. The aim of this study is to clarify the field of assessment tools for urban communities by analysing the current situation. The focus is on internationally well known assessment tools; BREEAM Communities, CASBEE for Urban Development and LEED for Neigborhood Development. The interest towards certification systems is increasing amongst the authorities, and especially amongst the global investors and property developers. Achieved certifications are expected to bring measureable publicity for the developers. The assessment of urban areas enables the comparison of municipalities and urban areas, and notably supports decision making processes. Authorities, city planners, and designers would benefit most from the use of the tools during the decision making process. - Highlights: ► The urban assessment tools have strong linkage to the region. ► The tools promote complementary building and retrofitting existing sites. ► Sharing knowledge and experiences is important in the development of the tools.

  20. Community assembly and coexistence in communities of arbuscular mycorrhizal fungi.

    Science.gov (United States)

    Vályi, Kriszta; Mardhiah, Ulfah; Rillig, Matthias C; Hempel, Stefan

    2016-10-01

    Arbuscular mycorrhizal fungi are asexual, obligately symbiotic fungi with unique morphology and genomic structure, which occupy a dual niche, that is, the soil and the host root. Consequently, the direct adoption of models for community assembly developed for other organism groups is not evident. In this paper we adapted modern coexistence and assembly theory to arbuscular mycorrhizal fungi. We review research on the elements of community assembly and coexistence of arbuscular mycorrhizal fungi, highlighting recent studies using molecular methods. By addressing several points from the individual to the community level where the application of modern community ecology terms runs into problems when arbuscular mycorrhizal fungi are concerned, we aim to account for these special circumstances from a mycocentric point of view. We suggest that hierarchical spatial structure of arbuscular mycorrhizal fungal communities should be explicitly taken into account in future studies. The conceptual framework we develop here for arbuscular mycorrhizal fungi is also adaptable for other host-associated microbial communities.

  1. Community Health Warriors: Marshallese Community Health Workers' Perceptions and Experiences with CBPR and Community Engagement.

    Science.gov (United States)

    Purvis, Rachel S; Bing, Williamina Ioanna; Jacob, Christopher J; Lang, Sharlynn; Mamis, Sammie; Ritok, Mandy; Rubon-Chutaro, Jellesen; McElfish, Pearl Anna

    2017-01-01

    Our manuscript highlights the viewpoints and reflections of the native Marshallese community health workers (CHWs) engaged in research with the local Marshallese community in Northwest Arkansas. In particular, this paper documents the vital role Marshallese CHWs play in the success of programs and research efforts. The negative health effects of nuclear testing in the Marshall Islands has been passed down through many generations, along with unfavorable attitudes toward the U.S. government and researchers. However, the community-based participatory research (CBPR) approach used by the University of Arkansas for Medical Sciences (UAMS) has allowed the native Marshallese CHWs to become advocates for the Marshallese community. The use of native CHWs has also leveled the power dynamics that can be a barrier to community-based research, and has strengthened trust with community stakeholders. Our paper shows how using Marshallese CHWs can produce positive health outcomes for the Marshallese community.

  2. Towards Community - Reflections on Community Psychiatry, Culture and Alterity

    Directory of Open Access Journals (Sweden)

    Ana Neto

    2015-06-01

    Full Text Available Introduction: The constant transformation of  communities  and  its relationship  with mental illness has been studied and debated for the past decades, although it is still not clear how it has been incorporated in clinical practice.Aims: The authors propose to review the relevance to Psychiatry, especially Community Psychiatry, of understanding  communities as well as the methodologies and conceptual frameworks that allow that approach.Methods: Selected and critical review of the literature about Community Psychiatry and Culture, Communities, and Social Inequity and Mental Health.Results: The authors start by reviewing the meaning  of  Community and the  defining principles of Community Psychiatry in their relationships with  cultural  sensitivity.  This aspect is illustrated with two examples of the impact of culture and alterity in the understanding of Mental Health and Service Organization, one at the level of International and Global Mental Health, and the other at the local communities’ level. In this context, participatory action research is highlighted.Conclusions: Psychiatry,  in  particular Community  Psychiatry,  by acknowledging a  wide  range  of  methodologies  and  being open  to transdisciplinary  models, is in a privileged position of electing communities as a field of investigation and integrate it in its praxis.

  3. Communities matter: Institutional preconditions for community renewable energy

    International Nuclear Information System (INIS)

    Wirth, Steffen

    2014-01-01

    Energy transitions are high on political agendas. From a practical viewpoint, community approaches are deemed essential in order to transition from a predominantly centralized energy supply to a decentralized one, and to exploit the potential of renewable energies. In this paper, I discuss how the emergence of community-based energy projects can be analyzed from an institutional perspective. In this context, a ‘community’ is treated as an individual institutional order that shapes decisions. I examine how community structures the implementation of biogas cooperatives in the Autonomous Province of South Tyrol in Northern Italy. My findings suggest that ‘community spirit’, a cooperative tradition, and the norms of locality and responsibility are central drivers behind the emergence and constitution of biogas cooperatives. Not only do these institutional features of community influence the decision concerning which farmers are in or out but also plant location and scale. I argue that ‘community’ is a necessary analytical category for understanding community energy. - Highlights: • I analyze the emergence and constitution of biogas cooperatives in South Tyrol. • Emerging processes and the principal constitutions are similar. • Institutional forces influenced the biogas cooperatives' emergence and constitution. • Biogas cooperatives are decisively shaped by community spirit and local tradition. • The concept of community is used as an explanatory category for community energy

  4. L-Lake macroinvertebrate community

    Energy Technology Data Exchange (ETDEWEB)

    Specht, W.L.

    1996-06-01

    To characterize the present benthic macroinvertebrate community of L-Lake, Regions 5 and 7 of the reservoir were sampled in September 1995 at the same locations sampled in 1988 and 1989 during the L-Lake monitoring program. The macroinvertebrate community of 1995 is compared to that of 1988 and 1989. The species composition of L-Lake`s macroinvertebrate community has changed considerably since 1988-1989, due primarily to maturation of the reservoir ecosystem. L-Lake contains a reasonably diverse macroinvertebrate community that is capable of supporting higher trophic levels, including a diverse assemblage of fish species. The L-Lake macroinvertebrate community is similar to those of many other southeastern reservoirs, and there is no indication that the macroinvertebrate community is perturbed by chemical or physical stressors.

  5. Community Members Draw the Line

    Directory of Open Access Journals (Sweden)

    Gregory Freeland

    2014-06-01

    Full Text Available This study investigates whether a community-based task force’s redistricting plan in Ventura County, California, positively affected fair representation, social equity issues, community interests, and the electoral process. Examination and evaluation of the organizational strategies and collaborations involved in the task force’s redistricting process find that the Board of Supervisors districts that members of the community drew were successful in improving and maintaining fair representation. This finding is based on comparing supervisorial votes and policies with community members’ votes on state propositions and local measures, in addition to conducting interviews with task force members, politicians, and community activists. This study finds that citizen participation in governmental processes improves overall community health and political participation.

  6. L-Lake macroinvertebrate community

    International Nuclear Information System (INIS)

    Specht, W.L.

    1996-06-01

    To characterize the present benthic macroinvertebrate community of L-Lake, Regions 5 and 7 of the reservoir were sampled in September 1995 at the same locations sampled in 1988 and 1989 during the L-Lake monitoring program. The macroinvertebrate community of 1995 is compared to that of 1988 and 1989. The species composition of L-Lake's macroinvertebrate community has changed considerably since 1988-1989, due primarily to maturation of the reservoir ecosystem. L-Lake contains a reasonably diverse macroinvertebrate community that is capable of supporting higher trophic levels, including a diverse assemblage of fish species. The L-Lake macroinvertebrate community is similar to those of many other southeastern reservoirs, and there is no indication that the macroinvertebrate community is perturbed by chemical or physical stressors

  7. What is microbial community ecology?

    Science.gov (United States)

    Konopka, Allan

    2009-11-01

    The activities of complex communities of microbes affect biogeochemical transformations in natural, managed and engineered ecosystems. Meaningfully defining what constitutes a community of interacting microbial populations is not trivial, but is important for rigorous progress in the field. Important elements of research in microbial community ecology include the analysis of functional pathways for nutrient resource and energy flows, mechanistic understanding of interactions between microbial populations and their environment, and the emergent properties of the complex community. Some emergent properties mirror those analyzed by community ecologists who study plants and animals: biological diversity, functional redundancy and system stability. However, because microbes possess mechanisms for the horizontal transfer of genetic information, the metagenome may also be considered as a community property.

  8. Civic communities and urban violence.

    Science.gov (United States)

    Doucet, Jessica M; Lee, Matthew R

    2015-07-01

    Civic communities have a spirit of entrepreneurialism, a locally invested population and an institutional structure fostering civic engagement. Prior research, mainly confined to studying rural communities and fairly large geographic areas, has demonstrated that civic communities have lower rates of violence. The current study analyzes the associations between the components of civic communities and homicide rates for New Orleans neighborhoods (census tracts) in the years following Hurricane Katrina. Results from negative binomial regression models adjusting for spatial autocorrelation reveal that community homicide rates are lower where an entrepreneurial business climate is more pronounced and where there is more local investment. Additionally, an interaction between the availability of civic institutions and resource disadvantage reveals that the protective effects of civic institutions are only evident in disadvantaged communities. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Bacterial Communities: Interactions to Scale

    Directory of Open Access Journals (Sweden)

    Reed M. Stubbendieck

    2016-08-01

    Full Text Available In the environment, bacteria live in complex multispecies communities. These communities span in scale from small, multicellular aggregates to billions or trillions of cells within the gastrointestinal tract of animals. The dynamics of bacterial communities are determined by pairwise interactions that occur between different species in the community. Though interactions occur between a few cells at a time, the outcomes of these interchanges have ramifications that ripple through many orders of magnitude, and ultimately affect the macroscopic world including the health of host organisms. In this review we cover how bacterial competition influences the structures of bacterial communities. We also emphasize methods and insights garnered from culture-dependent pairwise interaction studies, metagenomic analyses, and modeling experiments. Finally, we argue that the integration of multiple approaches will be instrumental to future understanding of the underlying dynamics of bacterial communities.

  10. Community colleges and economic mobility

    OpenAIRE

    Natalia A. Kolesnikova

    2010-01-01

    This paper examines the role of community colleges in the U.S. higher education system and their advantages and shortcomings. In particular, it discusses the population of community college students and economic returns to community college education for various demographic groups. It offers new evidence on the returns to an associate's degree. Furthermore, the paper uses data from the National Survey of College Graduates to compare educational objectives, progress, and labor market outcomes ...

  11. Community Detection for Large Graphs

    KAUST Repository

    Peng, Chengbin

    2014-05-04

    Many real world networks have inherent community structures, including social networks, transportation networks, biological networks, etc. For large scale networks with millions or billions of nodes in real-world applications, accelerating current community detection algorithms is in demand, and we present two approaches to tackle this issue -A K-core based framework that can accelerate existing community detection algorithms significantly; -A parallel inference algorithm via stochastic block models that can distribute the workload.

  12. Growth Hacking a Global Community

    OpenAIRE

    Sarkkinen, Laura; Rauhala, Marita

    2015-01-01

    As technology is developing at a fast phase people are engaging in community activities more and more online, either by extending their offline social life or by creating themselves a whole new parallel life as a member of virtual community. Companies behind communities are rivaling for attention and need to come up with increasingly clever tactics to attract and engage new members. In this thesis the relatively new phenomenon of growth hacking, the use of unconventional methods in order ...

  13. A nuclear community's perspective

    International Nuclear Information System (INIS)

    1987-09-01

    This submission delineates a perspective derived from the experience of a community which has lived with the nuclear industry since its beginnings in Canada, 45 years ago. Much has been accomplished in both basic and applied research in that time, and the industry continues to be recognized worldwide as a leader in solving high-technology problems. However, recent funding cuts have seriously jeopardized the industry's ability to maintain this high standard. Current anti-nuclear attitudes among our elected and appointed officials respond more to today's political fashions than tomorrow's evident needs. The town of Deep River believes that the industry has demonstrated a superb safety record in the past. If common sense prevails in matters of safety, and if appropriate levels of funding are maintained, the nuclear industry will continue to be a source of pride for all concerned

  14. Urban Climate Risk Communities

    DEFF Research Database (Denmark)

    Blok, Anders

    2016-01-01

    of Beck’s forward-looking agenda for a post-Euro-centric social science, outlines the contours of such an urban-cosmopolitan ‘realpolitik’ of climate risks, as this is presently unfolding across East Asian world cities. Much more than a theory-building endeavour, the essay suggests, Beck’s sociology......Ulrich Beck’s cosmopolitan sociology affords a much-needed rethinking of the transnational politics of climate change, not least in pointing to an emerging inter-urban geography of world cities as a potential new source of community, change and solidarity. This short essay, written in honour...... provides a standing invitation for further transnational dialogue and collaborative empirical work, in East Asia and beyond, on what are, arguably, the defining challenges for the 21st century world of global risks....

  15. Communities under climate change

    DEFF Research Database (Denmark)

    Nogues, David Bravo; Rahbek, Carsten

    2011-01-01

    The distribution of species on Earth and the interactions among them are tightly linked to historical and contemporary climate, so that global climate change will transform the world in which we live. Biological models can now credibly link recent decadal trends in field data to climate change......, but predicting future impacts on biological communities is a major challenge. Attempts to move beyond general macroecological predictions of climate change impact on one hand, and observations from specific, local-scale cases, small-scale experiments, or studies of a few species on the other, raise a plethora...... of unanswered questions. On page 1124 of this issue, Harley (1) reports results that cast new light on how biodiversity, across different trophic levels, responds to climate change....

  16. Communities and Values

    DEFF Research Database (Denmark)

    Salice, Alessandro

    2016-01-01

    is clearly illustrated by a by now rather standard approach to we-ness, which seeks to locate this property either in the subject of a given attitude (which, most perspicuously, is used to being characterized as an intention), or in the mode of the attitude or in its content. This view also suggests...... that there is one prototypical notion of group which conceptually has to be traced back to one of the three constituents of an intentional attitude and that the main way to access the notion of a group is by means of the concept of intention and/or intentional action. The present paper tackles a fairly divergent...... approach to the ontology of groups put forward by Dietrich von Hildebrand in his book on the Metaphysics of Community. First, von Hildebrand argues that there are different kinds of social groups and that, accordingly, individuals can be ‘together’ in radically different ways. In particular, he...

  17. FOILFEST :community enabled security.

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Judy Hennessey; Johnson, Curtis Martin; Whitley, John B.; Drayer, Darryl Donald; Cummings, John C., Jr. (.,; .)

    2005-09-01

    The Advanced Concepts Group of Sandia National Laboratories hosted a workshop, ''FOILFest: Community Enabled Security'', on July 18-21, 2005, in Albuquerque, NM. This was a far-reaching look into the future of physical protection consisting of a series of structured brainstorming sessions focused on preventing and foiling attacks on public places and soft targets such as airports, shopping malls, hotels, and public events. These facilities are difficult to protect using traditional security devices since they could easily be pushed out of business through the addition of arduous and expensive security measures. The idea behind this Fest was to explore how the public, which is vital to the function of these institutions, can be leveraged as part of a physical protection system. The workshop considered procedures, space design, and approaches for building community through technology. The workshop explored ways to make the ''good guys'' in public places feel safe and be vigilant while making potential perpetrators of harm feel exposed and convinced that they will not succeed. Participants in the Fest included operators of public places, social scientists, technology experts, representatives of government agencies including DHS and the intelligence community, writers and media experts. Many innovative ideas were explored during the fest with most of the time spent on airports, including consideration of the local airport, the Albuquerque Sunport. Some provocative ideas included: (1) sniffers installed in passage areas like revolving door, escalators, (2) a ''jumbotron'' showing current camera shots in the public space, (3) transparent portal screeners allowing viewing of the screening, (4) a layered open/funnel/open/funnel design where open spaces are used to encourage a sense of ''communitas'' and take advantage of citizen ''sensing'' and funnels are technological

  18. The community comes to campus: the Patient and Community Fair.

    Science.gov (United States)

    Towle, Angela; Godolphin, William; Kline, Cathy

    2015-08-01

    Community-based learning connects students with local communities so that they learn about the broad context in which health and social care is provided; however, students usually interact with only one or a few organisations that serve a particular population. One example of a community-based learning activity is the health fair in which students provide health promotion and screening for local communities. We adapted the health fair concept to develop a multi-professional educational event at which, instead of providing service, students learn from and about the expertise and resources of not-for-profit organisations. The fair is an annual 1-day event that students can attend between, or in place of, classes. Each community organisation has a booth to display information. One-hour 'patient panels' are held on a variety of topics throughout the day. Evaluation methods include questionnaires, exit interviews and visitor tracking sheets. Over 5 years (2009-2013), the fair increased in size with respect to estimated attendance, number of participating organisations, number of patient panels and number of students for whom the fair is a required curriculum component. Students learn about a range of patient experiences and community resources, and information about specific diseases or conditions. The fair is an efficient way for students to learn about a range of community organisations. It fosters university-community engagement through continuing connections between students, faculty members and community organisations. Lessons learned include the need for community organisations to have techniques to engage students, and ways to overcome challenges of evaluating an informal 'drop-in' event. The fair is an efficient way for students to learn about a range of community organisations. © 2015 John Wiley & Sons Ltd.

  19. Community photosynthesis of aquatic macrophytes

    DEFF Research Database (Denmark)

    Binzer, T.; Sand-Jensen, K.; Middelboe, A. L.

    2006-01-01

    We compared 190 photosynthesis-irradiance (P-E) experiments with single- and multispecies communities of macroalgae and vascular plants from freshwater and marine habitats. We found a typical hyperbolic P-E relation in all communities and no sign of photosaturation or photoinhibition of photosynt......We compared 190 photosynthesis-irradiance (P-E) experiments with single- and multispecies communities of macroalgae and vascular plants from freshwater and marine habitats. We found a typical hyperbolic P-E relation in all communities and no sign of photosaturation or photoinhibition...

  20. Parasite communities: patterns and processes

    National Research Council Canada - National Science Library

    Esch, Gerald W; Bush, Albert O; Aho, John M

    1990-01-01

    .... Taking examples from many hosts including molluscs, marine and freshwater fish, amphibians, reptiles, birds and mammals, this book shows how parasitic communities are influenced by a multitude...

  1. Community Engagement in a Graduate-Level Community Literacy Course

    Science.gov (United States)

    Marshall Bowen, Lauren; Arko, Kirsti; Beatty, Joel; Delaney, Cindy; Dorpenyo, Isidore; Moeller, Laura; Roberts, Elsa; Velat, John

    2014-01-01

    A case study of a graduate-level community literacy seminar that involved a tutoring project with adult digital literacy learners, this essay illustrates the value of community outreach and service-learning for graduate students in writing studies. Presenting multiple perspectives through critical reflection, student authors describe how their…

  2. Community Capitals as Community Resilience to Climate Change: Conceptual Connections

    Directory of Open Access Journals (Sweden)

    Shaikh Mohammad Kais

    2016-12-01

    Full Text Available In the last few decades, disaster risk reduction programs and climate initiatives across the globe have focused largely on the intimate connections between vulnerability, recovery, adaptation, and coping mechanisms. Recent focus, however, is increasingly paid to community resilience. Community, placed at the intersection between the household and national levels of social organization, is crucial in addressing economic, social, or environmental disturbances disrupting human security. Resilience measures a community’s capability of bouncing back—restoring the original pre-disaster state, as well as bouncing forward—the capacity to cope with emerging post-disaster situations and changes. Both the ‘bouncing back’ and ‘moving forward’ properties of a community are shaped and reshaped by internal and external shocks such as climate threats, the community’s resilience dimensions, and the intensity of economic, social, and other community capitals. This article reviews (1 the concept of resilience in relation to climate change and vulnerability; and (2 emerging perspectives on community-level impacts of climate change, resilience dimensions, and community capitals. It argues that overall resilience of a place-based community is located at the intersection of the community’s resilience dimensions, community capitals, and the level of climate disruptions.

  3. Community Capitals as Community Resilience to Climate Change: Conceptual Connections

    Science.gov (United States)

    Kais, Shaikh Mohammad; Islam, Md Saidul

    2016-01-01

    In the last few decades, disaster risk reduction programs and climate initiatives across the globe have focused largely on the intimate connections between vulnerability, recovery, adaptation, and coping mechanisms. Recent focus, however, is increasingly paid to community resilience. Community, placed at the intersection between the household and national levels of social organization, is crucial in addressing economic, social, or environmental disturbances disrupting human security. Resilience measures a community’s capability of bouncing back—restoring the original pre-disaster state, as well as bouncing forward—the capacity to cope with emerging post-disaster situations and changes. Both the ‘bouncing back’ and ‘moving forward’ properties of a community are shaped and reshaped by internal and external shocks such as climate threats, the community’s resilience dimensions, and the intensity of economic, social, and other community capitals. This article reviews (1) the concept of resilience in relation to climate change and vulnerability; and (2) emerging perspectives on community-level impacts of climate change, resilience dimensions, and community capitals. It argues that overall resilience of a place-based community is located at the intersection of the community’s resilience dimensions, community capitals, and the level of climate disruptions. PMID:27929448

  4. Designing to support community gardens by going beyond community gardens

    NARCIS (Netherlands)

    Wang, X.; Wakkary, R.; Rau, P.-L.P.

    2017-01-01

    Community gardens connect to many organizations in order to receive and offer resources and services. The complex sociotechnical systems in which community gardens inhabit bring both opportunities and challenges for designers who endeavor to support them. In this study, we investigated three

  5. Indigenous knowledge systems, local community and community in ...

    African Journals Online (AJOL)

    The title of the paper requires some brief reflection on the main topics implied. It is appropriate to start off with a definition of Indigenous Knowledge Systems (IKS) as well as a statement regarding the constitutional status of a community. Thereafter I will expand on the merits of IKS towards community development as well as ...

  6. The community ecology of pathogens: coinfection, coexistence and community composition.

    Science.gov (United States)

    Seabloom, Eric W; Borer, Elizabeth T; Gross, Kevin; Kendig, Amy E; Lacroix, Christelle; Mitchell, Charles E; Mordecai, Erin A; Power, Alison G

    2015-04-01

    Disease and community ecology share conceptual and theoretical lineages, and there has been a resurgence of interest in strengthening links between these fields. Building on recent syntheses focused on the effects of host community composition on single pathogen systems, we examine pathogen (microparasite) communities using a stochastic metacommunity model as a starting point to bridge community and disease ecology perspectives. Such models incorporate the effects of core community processes, such as ecological drift, selection and dispersal, but have not been extended to incorporate host-pathogen interactions, such as immunosuppression or synergistic mortality, that are central to disease ecology. We use a two-pathogen susceptible-infected (SI) model to fill these gaps in the metacommunity approach; however, SI models can be intractable for examining species-diverse, spatially structured systems. By placing disease into a framework developed for community ecology, our synthesis highlights areas ripe for progress, including a theoretical framework that incorporates host dynamics, spatial structuring and evolutionary processes, as well as the data needed to test the predictions of such a model. Our synthesis points the way for this framework and demonstrates that a deeper understanding of pathogen community dynamics will emerge from approaches working at the interface of disease and community ecology. © 2015 John Wiley & Sons Ltd/CNRS.

  7. Community Connections. Time Warner Community Responsibility Report, 1998-2000.

    Science.gov (United States)

    Owens, Jane; Stein, Carol

    This report highlights efforts by Time Warner personnel to strengthen community connections through various programs and services aimed at supporting: education, the arts, volunteerism, diversity, and business-community action. The report is divided into sections focusing on each of these areas. The first section, Education, describes programs…

  8. Science and Community Engagement: Connecting Science Students with the Community

    Science.gov (United States)

    Lancor, Rachael; Schiebel, Amy

    2018-01-01

    In this article we describe a course on science outreach that was developed as part of our college's goal that all students participate in a meaningful community engagement experience. The Science & Community Engagement course provides a way for students with science or science-related majors to learn how to effectively communicate scientific…

  9. Community Currency in Korea : How do we envision Community Currency?

    NARCIS (Netherlands)

    J. Kang (Joonmo); B.E. Hong (Baeg)

    2015-01-01

    textabstractCommunity currency schemes were first introduced in Korea in 1998. Since then, there have been many efforts to use them but no report or academic research on the topic in Korea. Thus, we conducted a field investigation to identify the scope of community currency schemes in Korea and as

  10. From Campuses to Communities: Community-Based Cultism and ...

    African Journals Online (AJOL)

    Due to the criminal activities of the cult groups in the NDR and ineptitude of the police, communities have responded by creating vigilante groups but this has only promoted cycle of violence. The paper recommended that government should tackle community-based cultism and also strengthen the Nigeria Police Force to be ...

  11. Role of Community Radio for Community Development in Bangladesh

    Directory of Open Access Journals (Sweden)

    Md. Anowarul Arif Khan

    2017-04-01

    Full Text Available Community radio is a medium of expressing and sharing views, thoughts, ideas, problems and prospects of rural, disadvantaged, vulnerable and hard to reach population with the mainstream population. As the media of root level people of the disadvantaged areas, Community radio has become popular in recent years and it has opened a new arena for both the policy makers as well as grassroots people to be involved in the development process of their community. There are about 17 Community Radios broadcasting 135 hours programmes in a day across the country. The Community Radio can help us in addressing social, economic, cultural, educational, health, water and sanitation and disaster related issues more effectively and strategically. In order to highlight the importance and effectiveness of community radio for the community development of Bangladesh, this study has been conducted based on the secondary data. This is a group effort that has become successful by the co-operation of many individuals and institutions. Access to Information (a2i Programme would like to express sincere gratitude to Monisha Mohonto, Project Focal and Bakul Mohonto, Program Assistant, BTV for introducing such an innovative project. As this is a new concept, there is no significant study has been conducted. Therefore the study has been directed to explore the importance of community FM radio in Bangladesh particularly in remote and rural areas.

  12. Renewal Strategy and Community Based Organisations in Community

    African Journals Online (AJOL)

    FBL

    organisations in the study areas and Community-Based Poverty Reduction. Programme ... regions or areas. In Nigeria, for ... industries in the growing and developing urban areas. ..... Security network is also provided by the community. To ..... Development Efforts in Nigeria: Case Study of Anambra and Oyo State, NISER.

  13. Using communities that care for community child maltreatment prevention.

    Science.gov (United States)

    Salazar, Amy M; Haggerty, Kevin P; de Haan, Benjamin; Catalano, Richard F; Vann, Terri; Vinson, Jean; Lansing, Michaele

    2016-03-01

    The prevention of mental, emotional, and behavioral (MEB) disorders among children and adolescents is a national priority. One mode of implementing community-wide MEB prevention efforts is through evidence-based community mobilization approaches such as Communities That Care (CTC). This article provides an overview of the CTC framework and discusses the adaptation process of CTC to prevent development of MEBs through preventing child abuse and neglect and bolstering child well-being in children aged 0 to 10. Adaptations include those to the intervention itself as well as those to the evaluation approach. Preliminary findings from the Keeping Families Together pilot study of this evolving approach suggest that the implementation was manageable for sites, and community board functioning and community adoption of a science-based approach to prevention in pilot sites looks promising. Implications and next steps are outlined. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  14. Is a community still a community? Reviewing definitions of key terms in community ecology

    OpenAIRE

    Stroud, James T.; Bush, Michael R.; Ladd, Mark C.; Nowicki, Robert J.; Shantz, Andrew A.; Sweatman, Jennifer

    2015-01-01

    Abstract Community ecology is an inherently complicated field, confounded by the conflicting use of fundamental terms. Nearly two decades ago, Fauth et?al. (1996) demonstrated that imprecise language led to the virtual synonymy of important terms and so attempted to clearly define four keywords in community ecology; ?community,? ?assemblage,? ?guild,? and ?ensemble?. We revisit Fauth et?al.'s conclusion and discuss how the use of these terms has changed over time since their review. An update...

  15. Assessing Community Leadership: Understanding Community Capacity for Health Improvement.

    Science.gov (United States)

    Castle, Billie; Wendel, Monica; Kelly Pryor, Brandy N; Ingram, Monique

    The purpose of this study was to pilot a quantitative instrument to measure aspects of community leadership within an assessment framework. The instrument includes 14 Likert-type questions asking residents how they perceive leaders within 5 sectors: Louisville Metro Council/Mayor's Office, the faith community, education, business, and the civic sector. Louisville/Jefferson County, Kentucky, has a population of about 743 000 residents. Respondents were asked to examine leadership within West Louisville, an economically deprived area of the city made up of 9 contiguous neighborhoods. This area is predominantly African American (78% compared with 22% in Louisville Metro), with an overall poverty rate of 43% (compared with 18% in Louisville Metro), and unemployment rate of 23% (compared with 8% in Louisville Metro). Residents of West Louisville are looking to leadership to address many of the inequities. Twenty-seven participants representing 7 community sectors completed the survey, of whom 90% work in West Louisville. The instrument measured local perceptions of leadership strength, effectiveness, trust, communication, community building, and leadership development. The majority of respondents agree that strong leadership exists across the 5 sectors, with variation regarding perceptions of the quality of that leadership. City leadership within the Mayor's Office and Metro Council is largely viewed positively, while the growing tensions within the education sector were reflected in the survey results. The perception of community leadership is important to understanding local community capacity to improve health and also inclusivity of community voice in the assessment and community improvement processes. Results from such assessments can offer useful information for strengthening community capacity and sustaining relationships needed to enact progressive and equitable solutions to address local issues. Leaders in a variety of settings can utilize this instrument to

  16. Trust Discovery in Online Communities

    Science.gov (United States)

    Piorkowski, John

    2014-01-01

    This research aims to discover interpersonal trust in online communities. Two novel trust models are built to explain interpersonal trust in online communities drawing theories and models from multiple relevant areas, including organizational trust models, trust in virtual settings, speech act theory, identity theory, and common bond theory. In…

  17. Community-acquired bacterial meningitis

    NARCIS (Netherlands)

    van de Beek, Diederik; Brouwer, Matthijs; Hasbun, Rodrigo; Koedel, Uwe; Whitney, Cynthia G.; Wijdicks, Eelco

    2016-01-01

    Meningitis is an inflammation of the meninges and subarachnoid space that can also involve the brain cortex and parenchyma. It can be acquired spontaneously in the community - community-acquired bacterial meningitis - or in the hospital as a complication of invasive procedures or head trauma

  18. Marketing Model for Community College.

    Science.gov (United States)

    Chahin, Jaime

    In order to survive projected enrollment decreases and to better serve nontraditional students, community colleges must develop marketing plans that make effective use of five community resources: local school system personnel, business and industry, civic and social service agencies, college personnel, and the local media. In approaching these…

  19. Distance Learning for Community Education

    Science.gov (United States)

    Cook, Anthony A.

    2010-01-01

    This article takes a look at the influence of technology on curriculum and teaching. It specifically examines the new wave of available technology and the opportunity for schools to make inroads into community outreach by engaging new, technological learning methods. The relationship among community education, public school relations, and distance…

  20. Strengthening community resilience: a toolkit

    NARCIS (Netherlands)

    Davis, Scott; Duijnhoven, Hanneke; Dinesen, Cecilie; Kerstholt, Johanna Helena

    2016-01-01

    While community resilience is said to have gained a lot of traction politically and given credence by disaster management professionals, this perception is not always shared by the individual members of communities. One solution to addressing the difficulty of individuals ‘conceptualising’ the

  1. Opening up closed policy communities.

    NARCIS (Netherlands)

    Termeer, C.J.A.M.; Werkman, R.A.

    2010-01-01

    Agricultural policy networks have served as classic cases of closed policy communities, facing pressure to open up. However attempts to involve new stakeholders slowly move forward. This paper addresses the question why it is so difficult to open up agricultural communities and what might help to

  2. A Community Patient Demographic System

    OpenAIRE

    Gabler, James M.; Simborg, Donald W.

    1985-01-01

    A Community Patient Demographic System is described. Its purpose is to link patient identification, demographic and insurance information among multiple organizations in a community or among multiple registration systems within the same organization. This function requires that there be a competent patient identification methodology and clear definition of local responsibilities for number assignment and database editing.

  3. Community College Employee Wellness Programs

    Science.gov (United States)

    Thornton, L. Jay; Johnson, Sharon

    2010-01-01

    This paper describes the prevalence and characteristics of employee wellness programs in public community colleges accredited by the Southern Association of Colleges and Schools (SACS). A random sample of 250 public community colleges accredited by SACS was mailed a 46-item employee-wellness program survey. The survey solicited program information…

  4. Otitis Media, Learning and Community.

    Science.gov (United States)

    McSwan, David; Clinch, Emma; Store, Ron

    2001-01-01

    A 3-year research project in Queensland (Australia) implemented educational and health strategies to ameliorate effects of otitis media at three schools in remote Aboriginal communities. The interdisciplinary model brought together health and education professionals, teacher aides, and the community, with the school being the lead agency. However,…

  5. Community Involvement in TB Research

    NARCIS (Netherlands)

    M. van der Werf (Marloes); S.G. Heumann (Silke); E.M.H. Mitchell

    2011-01-01

    textabstractWhile communities at risk have been both drivers and partners in HIV research, their important role in TB research is yet to be fully realized. Involvement of communities in tuberculosis care and prevention is currently on the international agenda. This creates opportunities and

  6. Mapping earthworm communities in Europe

    DEFF Research Database (Denmark)

    Rutgers, Michiel; Orgiazzi, Alberto; Gardi, Ciro

    Existing data sets on earthworm communities in Europe were collected, harmonized, modelled and depicted on a soil biodiversity map of Europe. Digital Soil Mapping was applied using multiple regressions relating relatively low density earthworm community data to soil characteristics, land use...

  7. What's Pragmatic about Community Organizing?

    Science.gov (United States)

    Abowitz, Kathleen Knight

    2010-01-01

    In the last decade, educational researchers and scholars have turned new attention to the theory and practice of community organizing as a method for addressing education injustices. While there are diverse traditions of community organizing work, by far the most influential model in US contexts is that of Saul Alinsky, whose "Rules for Radicals"…

  8. Community, Democracy, and Neighborhood News.

    Science.gov (United States)

    Hindman, Elizabeth Blanks

    1998-01-01

    Contributes to scholarship on democracy, community, and journalism by examining the interplay between communication, democracy, and community at an inner-city neighborhood newspaper. Concludes that, through its focus on neighborhood culture, acknowledgment of conflict, and attempts to provide a forum for the neighborhood's self-definition, the…

  9. Microbial communities in blueberry soils

    Science.gov (United States)

    Microbial communities thrive in the soil of the plant root zone and it is clear that these communities play a role in plant health. Although blueberry fields can be productive for decades, yields are sometimes below expectations and fields that are replanted sometimes underperform and/or take too lo...

  10. Online Education in Community Colleges

    Science.gov (United States)

    Cejda, Brent

    2010-01-01

    This chapter explores the tremendous growth in the use of the Internet to deliver distance education at community colleges. The author examines various definitions of online education, including the types of courses, programs, and degrees available and the types of community colleges that offer greater amounts of online programming. Considerations…

  11. Underrepresented communities: including the Portuguese ...

    African Journals Online (AJOL)

    This research article emanates from a doctoral study which investigated the potential inclusion of the records generated by South African Portuguese community-based organisations into a workable archival collecting initiative of the community. The specific purpose of this article is to report on the current status of ...

  12. The Community Psychology Evaluation Nexus

    Science.gov (United States)

    Sheldon, Jeffrey A.; Wolfe, Susan M.

    2015-01-01

    In 2012, the American Evaluation Association (AEA) added community psychology (CP) to its roster of topical interests groups (TIG). One of the highlights of the CP TIG program at the 2012 AEA Conference and the genesis of this "American Journal of Evaluation" Forum was a panel of accomplished community psychologists and evaluation…

  13. A Professional Learning Community Approach

    African Journals Online (AJOL)

    This paper provides insights into how Life Sciences teachers in the Eastern Cape can be supported through professional learning communities (PLCs) as a potential approach to enhancing their biodiversity knowledge. PLCs are communities that provide the setting and necessary support for groups of classroom teachers to ...

  14. Community Orientation and Media Use.

    Science.gov (United States)

    Neuwirth, Kurt; And Others

    1989-01-01

    Examines the relationship among media use, participation in local shopping and leisure activities, and orientation toward the local community. Reexamines Robert Merton's Cosmopolitan scale, finding it to have both localite (exclusively local orientation) and cosmopolite (orientation to events outside the local community) dimensions. (MM)

  15. Introduction: Diverse Perspectives on Community

    Science.gov (United States)

    Jakes J. Pamela; Dorothy Anderson

    2000-01-01

    A glance through the table of contents of any social science journal illustrates that social science disciplines define community quite differently. For example, geographers emphasize spatial aspects, economists emphasize work and markets, and sociologists emphasize social interactions and networks in their definitions of communities. As a scientific concept,...

  16. Inroduction: diverse perspectives on community

    Science.gov (United States)

    Pamela J. Jakes; Dorothy Anderson

    2000-01-01

    A glance through the table of contents of any social science journal illustrates that social science disciplines define community quite differently. For example, geographers emphasize spatial aspects, economists emphasize work and markets, and sociologists emphasize social interactions and networks in their definitions of communities. As a scientific concept,...

  17. Community Music in Cultural Policy

    NARCIS (Netherlands)

    van den Hoogen, Quirijn; Bisschop Boele, Evert; Bartleet, Brydie-Leigh; Higgins, Lee

    2018-01-01

    Community Music presents a contested field. Its art status, its methods and its effects all are under scrutiny as the various actors involved in community music practices frequently have very different backgrounds and different objectives. Aesthetic intentions, social objectives and economic

  18. Healthy School Communities in Canada

    Science.gov (United States)

    Bassett-Gunter, Rebecca; Yessis, Jennifer; Manske, Steve; Gleddie, Doug

    2016-01-01

    Background and context: Healthy school communities aim to optimise student health and educational achievement. Various models, terms and resources have been used to describe healthy school communities. Policy makers and practitioners have reported confusion around many of the key concepts involved because of the varying models and terms.…

  19. COMMUNITY HEALTH & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    care policy which was intended to make health care which of the two alternative methods of health care available to individuals and families in the financing options of free health or DRF was community at very little or no cost at all. However, preferred by the community members within most health facilities would appear to ...

  20. Global Journal of Community Medicine

    African Journals Online (AJOL)

    Global Journal of Community Medicine is aimed at promoting research in all areas of community or public health. It addresses issues of primary and tertiary health care. It deals with problems and solutions of health problems at the grassroots and daily livings. Visit the Global Journal Series website here: ...

  1. Democratic Leadership for Community Schools

    Science.gov (United States)

    Ruffin, Verna D.; Brooks, Jeffrey S.

    2010-01-01

    Because educators continue to face challenges when seeking to educate all children, there is a growing recognition that schools must work with communities to maximize their collective educational potential (Murphy, Beck, Crawford, Hodges, & McGauphy, 2001). Although community schools are still in the emergent stages of development, their emphasis…

  2. Positive feedback in species communities

    NARCIS (Netherlands)

    Gerla, D.J.

    2012-01-01

    Sometimes the eventual population densities in a species community depend on the initial densities or the arrival times of species. If arrival times determine species composition, a priority effect has occurred. Priority effects may occur if the species community exhibits alternative stable states

  3. Community pharmacy practice in Pakistan

    Directory of Open Access Journals (Sweden)

    Nousheen Aslam

    2012-01-01

    Conclusion: This study concludes that the current status of community pharmacy practice is below par. There is a need to involve more pharmacists at community level and develop awareness programs to counter patients′ routine drug issues and reducing the burden of disease from society.

  4. Iowa Community Colleges Accounting Manual.

    Science.gov (United States)

    Iowa State Dept. of Education, Des Moines. Div. of Community Colleges and Workforce Preparation.

    This document describes account classifications and definitions for the accounting system of the Iowa community colleges. In view of the objectives of the accounting system, it is necessary to segregate the assets of the community college according to its source and intended use. Additionally, the accounting system should provide for accounting by…

  5. Tenure and America's Community Colleges

    Science.gov (United States)

    DiMaria, Frank

    2012-01-01

    America's colleges and universities have been moving slowly but steadily away from tenure over the past decade. The American Federation of Teachers reports that community colleges have seen a 22% increase in the number of instructional staff between 1997 and 2007. During that time, the percentage of community college faculty that were full-time…

  6. Probing community nurses' professional basis

    DEFF Research Database (Denmark)

    Schaarup, Clara; Pape-Haugaard, Louise; Jensen, Merete Hartun

    2017-01-01

    Complicated and long-lasting wound care of diabetic foot ulcers are moving from specialists in wound care at hospitals towards community nurses without specialist diabetic foot ulcer wound care knowledge. The aim of the study is to elucidate community nurses' professional basis for treating...... diabetic foot ulcers. A situational case study design was adopted in an archetypical Danish community nursing setting. Experience is a crucial component in the community nurses' professional basis for treating diabetic foot ulcers. Peer-to-peer training is the prevailing way to learn about diabetic foot...... ulcer, however, this contributes to the risk of low evidence-based practice. Finally, a frequent behaviour among the community nurses is to consult colleagues before treating the diabetic foot ulcers....

  7. Coalfield communities and their environment

    Energy Technology Data Exchange (ETDEWEB)

    Parkinson, E

    1985-01-01

    Three main issues threaten the future of the coalfield communities: the coal industry is creating new capacity as the demand for coal slumps against predicted growth; the western democracies in general, and Britain in particular, are undergoing an economic restructuring under a financial management strategy which yields high levels of unemployment; the coalfield communities live in environments determined by the nature and history of their own local coal industry. The paper considers the effects of these issues on the coalfield communities. Topics covered are: the coalfield communities; opportunities to work; land use planning and the coal industry; spoil disposal; land reclamation; access; housing; tourism and leisure; open cast mining; coalfield community action zones; the financial scene.

  8. Do we need community geriatrics?

    LENUS (Irish Health Repository)

    O'Hanlon, S

    2012-01-30

    Community geriatrics has evolved as a specific aspect of geriatric medicine in the UK. In Ireland there is uncertainty as to how it should be planned. This is the first national survey of consultants, specialist registrars and general practitioners to seek their opinions. Most consultants and GPs reported already having a community aspect to their current practice, e.g. nursing home visits or community hospital visits, whereas most SpRs did not. Forty three of 62 respondents (69%) agreed that there is a need for community geriatricians and that there should be integration with hospital medicine. Fifty seven of 62 respondents (92%) felt that there would be a beneficial effect on GP services, though some expressed concern about work overlap. Thirteen of the 25 SpRs (52%) in training hoped to begin practice in community geriatrics in the future.

  9. Community Capacity Building for Health

    Directory of Open Access Journals (Sweden)

    Martha Traverso-Yepez

    2012-05-01

    Full Text Available There is a great deal of literature examining the benefits and relevance of community participation and community capacity building in health promotion and disease prevention endeavors. Academic literature embracing principles and commitment to community participation in health promotion practices often neglects the complexities involved and the flexibility required to work within this approach. This article addresses some of these challenges through a case study of two projects funded by Provincial Wellness Grants in Newfoundland and Labrador, a province in Canada with a strong tradition of community ties and support systems. In addition to addressing the unique circumstances of the community groups, this research allowed the authors to examine the situational context and power relations involved in the provision of services as well as the particular forms of subjectivity and citizenship that the institutional practices support. Recognizing this complex interdependency is an important step in creating more effective intervention practices.

  10. Community attitudes toward nuclear plants

    International Nuclear Information System (INIS)

    Peelle, E.

    1982-01-01

    Among the many effects of the accident at Three Mile Island are impacts upon other communities that currently host nuclear-power reactors. Because studies on communities' reactions not immediately available, this chapter reviews existing studies and speculates about possible effects. The patterns and variations in impacts on and responses of nuclear host communities have been the subject of studies at Oak Ridge National Laboratory (Oak Ridge, Tennessee) since 1972. This essay presents results from four post-licensing studies of host communities - Plymouth, Massachusetts, and Waterford, Connecticut (PL-1), and Brunswick, North Carolina, and Appling-Toombs counties, Georgia (PL-2) - along with case study and attitude survey information from two additional communities in which reactors are under construction: Hartsville, Tennessee, and Cherokee County, South Carolina. Differences and similarities between the sites have been assessed in terms of differences in input and social structure; factors affecting the generally favorable attitudes toward local nuclear plants are discussed

  11. Paradoxes unbounded: Practising community making

    Directory of Open Access Journals (Sweden)

    Tess Maginess

    2011-10-01

    Full Text Available The first section of this paper is a discussion of the paradoxes contained in definitionsof the word 'community' and deliberately foregrounds and makes problematicconflicting meanings before arguing for a third definition and practice of community.This third definition and practice celebrates and even transcends contradictions withinan active learning model of education in the community, aimed at tackling inequalityand prejudice. The second section offers an autocritical narrative account of aneducation in the community project that illustrates how such a practice of communitymaking can be achieved within an educational framework in which pupil is teacher andteacher is pupil and in which an imaginative, creative approach is deployed toconstruct a community making practice. The paper draws on understandings fromcommunity development, inclusive and creative education, emancipatory actionresearch, postcolonial and post-structuralist theory.

  12. Community-acquired pneumonia

    International Nuclear Information System (INIS)

    Poetter-Lang, S.; Herold, C.J.

    2017-01-01

    The diagnosis of community-acquired pneumonia (CAP) is often not possible based only on the clinical symptoms and biochemical parameters. For every patient with the suspicion of CAP, a chest radiograph in two planes should be carried out. Additionally, a risk stratification for the decision between outpatient therapy or hospitalization is recommended. Based on the evaluation of the different radiological patterns as well as their extent and distribution, a rough allocation to so-called pathogen groups as well as a differentiation between viral and bacterial infections are possible; however, because different pathogens cause different patterns an accurate correlation is not feasible by relying purely on imaging. The radiological findings serve as proof or exclusion of pneumonia and can also be used to evaluate the extent of the disease (e.g. monolobular, multilobular, unilateral or bilateral). In cases of prolonged disease, suspicion of complications (e.g. pleural effusion or empyema, necrotizing pneumonia or abscess) or comorbid conditions (e.g. underlying pulmonary or mediastinal diseases) computed tomography is an important diagnostic tool in addition to chest radiography. Ultrasound is often used to diagnose pleural processes (e.g. parapneumonic effusion or pleural empyema). (orig.) [de

  13. From Community to Meta-Community Mental Health Care

    Directory of Open Access Journals (Sweden)

    Nick Bouras

    2018-04-01

    Full Text Available Since the 1960s, we have witnessed the development and growth of community mental health care that continues to dominate mental health policy and practice. Several high-income countries have implemented community mental health care programmes but for many others, including mostly low- and middle-income countries, it remains an aspiration. Although community mental health care has been positive for many service users, it has also had severe shortcomings. Expectations that it would lead to fuller social integration have not been fulfilled and many service users remain secluded in sheltered or custodial environments with limited social contacts and no prospect of work. Others receive little or no service at all. In today’s complex landscape of increasingly specialised services for people with mental health problems, the number of possible interfaces between services is increasing. Together with existing uneven financing systems and a context of constant change, these interfaces are challenging us to develop effective care pathways adjusted to the needs of service users and their carers. This discussion paper reviews the developments in community mental health care over the recent years and puts forward the concept of “Meta-Community Mental Health Care”. “Meta-Community Mental Health Care” embraces pluralism in understanding and treating psychiatric disorders, acknowledges the complexities of community provision, and reflects the realities and needs of the current era of care.

  14. Saraniyadhamma Community knowledge Incubator area

    Directory of Open Access Journals (Sweden)

    Siripong Arundechachai

    2017-03-01

    Full Text Available The purposes of this research were to 1 study the situation of the community knowledge incubator area at the past to the present time in Banhad,Tambon banhad, Amphoe banhad Changwat KhonKaen, 2 study guidelines Buddhadhamma “Saraniyadhamma” revised by Community knowledge application Banhad, Tambon banhad, Amphoe banhad Changwat KhonKaen, 3 study workflow of Saraniyadhamma that led to the creation of the network community knowledge incubator area together with another community. The target groups used in this research of the purposive sampling family farmers of 10, in Tambon banhad,Amphoe banhad Changwat KhonKaen. the Qualitative research.was used in this Study The results showed that 1 diversing issues in the Community live action of the relationships or occupations experience can be passed down, as well as the risk of loss the relationships between the people and people, people and supernatural. After people and nature lost in the community, but thay Continue to Perform, because community has strengths given the importance of all, to themselves, to others, generous, generosity, mounting traditions, Led to the creation Community Knowledge Incubator 2 adopting Buddhism’s “Saraniyadhamma 6” that applied to community Knowledge Incubator by giving to make immunity community. Strong The six fetures, were Principle 1: Metta-kayakamma, feature on sacrifiction, unity and synergy. Principle 2: Metta-manokamma, feature on mercifulness, collective sacrification. Principle 3: Metta-kayakamma, feature on good things, speak well, good action. Principle 4: Sadharana-bhogi, feature on humane society, mutual respect. Principle 5 Sila-samannata, feature on, follow the rules of society. Principle 5 Metta-manokamma feature on rationality, listening to the opinion of others. It found that there were process-driven learning and following six rules of saraniyadhamma, and immunity system, risk Decoupled. 3 Networks Saraniyadhamma learnt together with other

  15. Immigrant-Host Community Relations in Malawi's Community Based ...

    African Journals Online (AJOL)

    government sponsored settlement schemes in Zimbabwe, for example, are viewed as ... diversity of community development projects and state provided public ..... Development Project in Malawi: case studies of beneficiary groups in Machinga ...

  16. 78 FR 13350 - Proposed Collection; Comment Request Healthy Communities Study: How Communities Shape Children's...

    Science.gov (United States)

    2013-02-27

    ... community-based initiatives; community characteristics (e.g., school environment); measurements of children... used for the development of future research initiatives targeting childhood obesity. Frequency of... Request Healthy Communities Study: How Communities Shape Children's Health (HCS) Summary: Under the...

  17. 76 FR 59706 - Proposed Collection; Comment Request; Healthy Communities Study: How Communities Shape Children's...

    Science.gov (United States)

    2011-09-27

    ... published in scientific journals and will be used for the development of future research initiatives... Request; Healthy Communities Study: How Communities Shape Children's Health (HCS) SUMMARY: Under the... control number. Proposed Collection: Title: Healthy Communities Study: How Communities Shape Children's...

  18. Challenge of superfund community relations

    International Nuclear Information System (INIS)

    Goldman, N.J.

    1991-01-01

    Conducting a community relations effort in a community which is home to a Superfund site is a formidable challenge. Any education press, however appropriate, quickly falls victim to doubt, mistrust of fears of the very public intended to be served by the effort. While each site is uniquely different, the issues raised by affected communities in one part of the country are strikingly similar to those raised in other parts. Those most involved must join those most affected in seeking meaningful solutions and in building the trust that is so vital in moving forward with Superfund

  19. Opinion Evolution in Closed Community

    Science.gov (United States)

    Sznajd-Weron, Katarzyna; Sznajd, Józef

    A simple Ising spin model which can describe a mechanism of making a decision in a closed community is proposed. It is shown via standard Monte Carlo simulations that very simple rules lead to rather complicated dynamics and to a power law in the decision time distribution. It is found that a closed community has to evolve either to a dictatorship or a stalemate state (inability to take any common decision). A common decision can be taken in a ``democratic way'' only by an open community.

  20. Systems biology of Microbial Communities

    Energy Technology Data Exchange (ETDEWEB)

    Navid, A; Ghim, C; Fenley, A; Yoon, S; Lee, S; Almaas, E

    2008-04-11

    Microbes exist naturally in a wide range of environments, spanning the extremes of high acidity and high temperature to soil and the ocean, in communities where their interactions are significant. We present a practical discussion of three different approaches for modeling microbial communities: rate equations, individual-based modeling, and population dynamics. We illustrate the approaches with detailed examples. Each approach is best fit to different levels of system representation, and they have different needs for detailed biological input. Thus, this set of approaches is able to address the operation and function of microbial communities on a wide range of organizational levels.

  1. Reconsidering Community-based Retailing

    OpenAIRE

    Maughan, Rebecca; O'Driscoll, Aidan

    2012-01-01

    One of the areas with great potential for economic, social and environmental benefit is community-based retailing. The concept of community based retailing can incorporate a number of different tenets. We suggest that it is retailing that is based close to the community it serves, usually within the town or village centre rather than out-of-town locations, and which is composed of a diverse range of small and medium sized business that are often independently or co-operatively owned. These co...

  2. Innovative Partnerships Assist Community College Computing Programs.

    Science.gov (United States)

    O'Banion, Terry

    1987-01-01

    Relates efforts of major corporations in providing assistance to community college computing programs. Explains the goals of the League for Innovation in the Community College, a consortium of 19 community colleges, and cites examples of collaborative projects. (ML)

  3. Community Seismic Network (CSN)

    Science.gov (United States)

    Clayton, R. W.; Heaton, T. H.; Kohler, M. D.; Cheng, M.; Guy, R.; Chandy, M.; Krause, A.; Bunn, J.; Olson, M.; Faulkner, M.; Liu, A.; Strand, L.

    2012-12-01

    We report on developments in sensor connectivity, architecture, and data fusion algorithms executed in Cloud computing systems in the Community Seismic Network (CSN), a network of low-cost sensors housed in homes and offices by volunteers in the Pasadena, CA area. The network has over 200 sensors continuously reporting anomalies in local acceleration through the Internet to a Cloud computing service (the Google App Engine) that continually fuses sensor data to rapidly detect shaking from earthquakes. The Cloud computing system consists of data centers geographically distributed across the continent and is likely to be resilient even during earthquakes and other local disasters. The region of Southern California is partitioned in a multi-grid style into sets of telescoping cells called geocells. Data streams from sensors within a geocell are fused to detect anomalous shaking across the geocell. Temporal spatial patterns across geocells are used to detect anomalies across regions. The challenge is to detect earthquakes rapidly with an extremely low false positive rate. We report on two data fusion algorithms, one that tessellates the surface so as to fuse data from a large region around Pasadena and the other, which uses a standard tessellation of equal-sized cells. Since September 2011, the network has successfully detected earthquakes of magnitude 2.5 or higher within 40 Km of Pasadena. In addition to the standard USB device, which connects to the host's computer, we have developed a stand-alone sensor that directly connects to the internet via Ethernet or wifi. This bypasses security concerns that some companies have with the USB-connected devices, and allows for 24/7 monitoring at sites that would otherwise shut down their computers after working hours. In buildings we use the sensors to model the behavior of the structures during weak events in order to understand how they will perform during strong events. Visualization models of instrumented buildings ranging

  4. Community participation in disease control.

    Science.gov (United States)

    Bermejo, A; Bekui, A

    1993-05-01

    The main determinants of community participation in disease control programmes are identified and a framework with eleven variables is developed. Attention is drawn to the political background, community characteristics, the managerial capacity of the provider and the epidemiology of the disease. The framework is designed to guide health professionals in the systematic assessment and monitoring of participation in disease control programmes. Analysis of the Ghanaian Guinea Worm Eradication Programme and the Nicaraguan Tuberculosis Control Programme are presented as case studies. They show that political support does not guarantee community participation in disease control programmes and stress the importance of other determinants such as commitment to PHC, intersectoral coordination, the project approach and human resources. The relevance of the epidemiology of the disease in determining what degree of community participation will be most effective is highlighted by the case studies.

  5. Community Detection for Large Graphs

    KAUST Repository

    Peng, Chengbin; Kolda, Tamara G.; Pinar, Ali; Zhang, Zhihua; Keyes, David E.

    2014-01-01

    Many real world networks have inherent community structures, including social networks, transportation networks, biological networks, etc. For large scale networks with millions or billions of nodes in real-world applications, accelerating current

  6. International Journal of Community Research

    African Journals Online (AJOL)

    : 2384 - 6828] is a peer reviewed journal publication of Anthonio Research Center. IJCR publishes research articles, review articles, short reports and commentaries that are community-based or inter and intra-cultural based. IJCR also accepts ...

  7. COMMUNITY MEDICINE & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    Journal of Community Medicine and Primary Health Care. ... Ladoke Akintola University of Technology, PMB 4400, Osogbo, Osun State. ... weak management and poor adherence to the basic infrastructure e.g. primary, secondary and tertiary.

  8. Community Culture and the Environment

    Science.gov (United States)

    The Guide explores the concepts of community and culture and provides tools for identifying, assessing and working cooperatively within the social dynamics and local values connected to environmental protection.

  9. Being participated: a community approach

    CSIR Research Space (South Africa)

    Winschiers-Theophilus, H

    2010-01-01

    Full Text Available obvious throughout the design experiences within our community project. Supported by a theoretical framework we reflect upon current participatory design practices. We intend to inspire and refine participatory design concepts and methods beyond...

  10. COMMUNITY HEALTH & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    adedamla

    Quarry industry has become a major means of livelihood in Ebonyi state, but insufficient data exists on their operations ... of Dust Mask among Crushers of Selected Quarry (Crushed ... Journal of Community Medicine and Primary Health Care.

  11. Production in aquatic macrophyte communities

    DEFF Research Database (Denmark)

    Binzer, Thomas; Sand-Jensen, Kaj

    2002-01-01

    -dimensional structure because of the strong drag and shear forces of moving water. This difference in canopy structure has been suggested to account for the three- to fivefold higher gross production rates in terrestrial than aquatic communities. To evaluate the effect of community structure in aquatic habitats, we......Many terrestrial plant canopies regulate spatial patterns in leaf density and leaf inclination to distribute light evenly between the photosynthetic tissue and to optimize light utilization efficiency. Sessile aquatic macrophytes, however, cannot maintain the same well-defined three...... was markedly enhanced by a vertical orientation of thalli when absorptance and community density were both high. This result implies that aquatic macrophytes of high thallus absorptance and community density exposed to high light are limited in attaining high gross production rates because of their inability...

  12. COMMUNITY HEALTH & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    Department of Epidemiology and Community Health, University of Ilorin, Ilorin, Nigeria .... exercise. All pupils in the selected school later done under the light ..... increased the likelihood of intestinal parasitic of Ilechukwu et al in which a ...

  13. COMMUNITY MEDICINE & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    ajiboro

    3Department of Community and Primary Health Care, College of Medicine, University of Lagos, Idiaraba, ... Some of the participants (45.3%) carry out physical exercises such as walking ..... hypertension, continuous effective management of.

  14. Storage Tank Legionella and Community

    Data.gov (United States)

    U.S. Environmental Protection Agency — Storage Tank Legionella and Community. This dataset is associated with the following publication: Qin, K., I. Struewing, J. Santodomingo, D. Lytle, and J. Lu....

  15. & PRIMARY HEALTH CARE COMMUNITY MEDICINE

    African Journals Online (AJOL)

    community, workplace, markets and healthcare effect of attrition giving approximately 200 and. 12 setting. ..... of women and 94% of men had heard about HIV. ... barriers to HIV prevention, HIV Counseling and. 26 ... gave a human face to HIV.

  16. COMMUNITY MEDICINE & PRIMARY HEALTH CARE

    African Journals Online (AJOL)

    ajiboro

    Work Profile of Community Health Extension Workers in Cross. River State and ... reasons. In some countries they were to meet shortages in health manpower. In other ... Life expectancy is 51 years; maternal mortality and workers were ...

  17. Community Governance and Vocational Education

    Science.gov (United States)

    Martasari, R.; Haryanti, R. H.; Susiloadi, P.

    2018-02-01

    Vocational education is required to create a design of education and training that is friendly and feasible for disabled people. The state has a responsibility for it, but with all the limitations, the state can not always be present. This article aims to analyze the capacity of community governance in passing vocational education for people with disabilities in Ponorogo, Indonesia. Articles are the results of research for approximately two years by using data collection techniques through interviews, documentation and observation. Source Triangulation with analysis technique using interactive model is used for data validation. The results show that there are two large capacities owned by Organisasi Sosial Rumah Kasih Sayang as community governance in conducting vocational education for the disabled person namely community credibility and community vigilance.

  18. The iSchool Community

    DEFF Research Database (Denmark)

    Bogers, Toine; Greifeneder, Elke

    2016-01-01

    the reviewer pool more representative of the iSchool community as a whole by including more women and more researchers from Asian institutions. Other recommendations are to improve the continuity of the reviewer pool and to provide clearer instructions to reviewers to ensure that written reviews explicitly...... cover all the aspects represented by the review scores. The results of our study provide the iSchool community with a descriptive analysis of its community and a better understanding of its review process.......A fair review process is essential to the success of any scientific conference. In this paper we present an analysis of the reviewing process of the 2014-2015 iConferences as well as a demographic analysis of the iConference community as a whole. The results show a clear need for making...

  19. Community energy self-reliance

    Science.gov (United States)

    1980-07-01

    Goals of a workshop/conference on community renewable energy systems are: (1) to encourage decentralization in attacking energy problems, (2) to show how renewable energy can meet community goals, (3) to present examples of successful projects, (4) to discuss the planning and management of renewable energy systems, (5) to identify sources of financial support, (6) to share legal strategies, and (7) to examine utility roles.

  20. Spatiotemporal Modeling of Community Risk

    Science.gov (United States)

    2016-03-01

    Ertugay, and Sebnem Duzgun, “Exploratory and Inferential Methods for Spatio-Temporal Analysis of Residential Fire Clustering in Urban Areas,” Fire ...response in communities.”26 In “Exploratory and Inferential Methods for Spatio-temporal Analysis of Residential Fire Clustering in Urban Areas,” Ceyhan...of fire resources spread across the community. Spatiotemporal modeling shows that actualized risk is dynamic and relatively patterned. Though

  1. Community care and social services.

    OpenAIRE

    Renwick, D.

    1996-01-01

    The aim of community care is to enable people with various types of disability to live in their own homes, rather than in institutions. This involves the provision of support and services at home by various agencies. After a critical report in 1986 identified problems with coordination and flexibility of community care services, the white paper Caring for People (1989) stated the government's aim to provide a "needs led," responsive range of services, promoting maximum independence of those w...

  2. Privatizing community animal health worker based veterinary ...

    African Journals Online (AJOL)

    Privatizing community animal health worker based veterinary services delivery system in West Kordofan, Southern Sudan; The needed roles of community animal health assistant (CAHA) and Pastoral unions.

  3. Community Concern on Environmental Conservation

    Science.gov (United States)

    Nugraha, Fajar Adie; Maryono

    2018-02-01

    Research on the relationship between humans and the environment is always very interesting to be studied. This paper is one of the studies of sustainable development in its implementation with the empowerment of society that comes from the community itself. So far, community studies related to development occasionally target the growth of the economic side only. Community study on the environment becomes an alternative choice, compared with human relationships with humans themselves, or humans with human needs themselves. The study of community development by looking at the environment can be a wise choice, where all activities of fulfilling human needs are always inseparable from the element of interaction with the environment. Community development that is based on the environment itself, will give a better impact, just solely. Various methods of learning human relationships. A community-based environmental assessment study can be an alternative choice to support a sustainable development mission, which is development that has a positive impact on the present and the future.

  4. Mountain Plant Community Sentinels: AWOL

    Science.gov (United States)

    Malanson, G. P.

    2017-12-01

    Mountain plant communities are thought to be sensitive to climate change. Because climatic gradients are steep on mountain slopes, the spatial response of plant communities to climate change should be compressed and easier to detect. These expectations have led to identifying mountain plant communities as sentinels for climate change. This idea has, however, been criticized. Two critiques, for alpine treeline and alpine tundra, are rehearsed and supplemented. The critique of alpine treeline as sentinel is bolstered with new model results on the confounding role of dispersal mechanisms and sensitivity to climatic volatility. In alpine tundra, for which background turnover rates have yet to be established, community composition may reflect environmental gradients only for extremes where effects of climate are most indirect. Both plant communities, while primarily determined by energy at broad scales, may respond to water as a proximate driver at local scales. These plant communities may not be in equilibrium with climate, and differently scaled time lags may mean that ongoing vegetation change may not signal ongoing climate change (or lack thereof). In both cases a double-whammy is created by scale dependence for time lags and for drivers leading to confusion, but these cases present opportunities for insights into basic ecology.

  5. A community approach to health.

    Science.gov (United States)

    Hagland, M

    1997-01-01

    Improving the health and well-being of a community may seem like a daunting task-particularly when you consider the vast number of factors that can influence the quality of life of a neighborhood or a region. It's not impossible, however, as six widely different communities across the U.S. are discovering. The Accelerating Community Transformation (ACT) project--now underway by The Healthcare Forum through a five-year, $5 million grant from pharmaceutical joint venture Astra Merck Inc.--is an innovative attempt to create real-life learning laboratories in communities as diverse as an inner-city neighborhood on the west side of Chicago; the small southern town of Aiken, S.C.: the semi-desert city of San Bernardino, Calif.; a corner of America's heartland where Missouri, Kansas. Nebraska and Iowa meet; the new town of Celebration, Fla.; and St. Louis, Mo. The goals: to evaluate and accelerate community-wide efforts that result in healthier, more desirable places for people to live, work and play; to build community capacity; and to achieve measurable improved health and quality of life outcomes.

  6. Innovations in community physiotherapy

    Directory of Open Access Journals (Sweden)

    M. Ellangovin

    2010-09-01

    Full Text Available In the last 35 years, Bangladesh has produced only 415 physiotherapists to meet the demands of a total population of 150 million. Most of them practice in the capital city of Dhaka because of better business prospects. The need to formulate an innovative strategy to meet the huge demand is obvious.According to a World Bank report (2005, 44% (poor and 33% (very poor people approach local pharmacists or medicine sellers for their ailments due to poor accessibility to healthcare facilities and also to avoid consultation fees. Due to scarcity in the number of professionals, community physiotherapists have become popular with rural patients. They use innovative treatment approaches, which combines traditional Physiotherapy and ancient Ayurvedic massage. Targeting equitable access to all, Gonoshasthaya Kendra (GK has its own health insurance policy. The fee is determined by the socio-economic status of the patient. Experienced paramedics are now able to administer treatment without direct supervision all the time. The number of patients seen by them is multiplying at a fascinating rate every year due to the growing recognition of their work. Gonoshasthaya Kendra (GK was established in 1972 and provides primary health care to a rural population of over 1.08 million across 629 villages in Bangladesh. The strategies and methods adopted by Gonoshasthaya Kendra in bridging the gap and promoting community physiotherapy by training health workers or “paramedics” in Bangladesh, has been successful. Even though training of many more paramedics is required, success is guaranteed.Au cours de ces 35 dernières années, le Bangladesh a formé uniquement 415 kinésithérapeutes pour une population totale de 150 millions de personnes. La plupart d’entre eux exercent dans la capitale, Dhaka, où les perspectives de travail sont les meilleures. La mise en place d’une stratégie innovante est par conséquent nécessaire pour répondre à la forte demande

  7. Corporate Philanthropy Toward Community Health Improvement in Manufacturing Communities.

    Science.gov (United States)

    McHugh, Megan; Farley, Diane; Maechling, Claude R; Dunlop, Dorothy D; French, Dustin D; Holl, Jane L

    2018-06-01

    Virtually all large employers engage in corporate philanthropy, but little is known about the extent to which it is directed toward improving community health. We conducted in-depth interviews with leaders of corporate philanthropy from 13 of the largest manufacturing companies in the US to understand how giving decisions were made, the extent to which funding was directed towards improving community health, and whether companies coordinate with local public health agencies. We found that corporate giving was sizable and directed towards communities in which the manufacturers have a large presence. Giving was aligned with the social determinants of health (i.e., aimed at improving economic stability, the neighborhood and physical environment, education, food security and nutrition, the community and social context, and the health care system). However, improving public health was not often cited as a goal of corporate giving, and coordination with public health agencies was limited. Our results suggest that there may be opportunities for public health agencies to help guide corporate philanthropy, particularly by sharing community-level data and offering their measurement and evaluation expertise.

  8. Contextual community prevention theory: building interventions with community agency collaboration.

    Science.gov (United States)

    Morales, Eduardo S

    2009-11-01

    Translation from research to practice faces numerous problems that include replicating effectiveness, fidelity to the protocol and processes, and adaptations to different types of target populations. Working collaboratively with existing service providers can speed up the time for development and can ease the implementation of empirical randomized trials. Contextual community prevention theory is an innovative approach that focuses on changing behaviors of community members by creating a visible institutional presence that draws and pulls the targeted population into the organization's activities and interventions. The result is an institution or organization within the community that provides a new active and dynamic context, engaging its community members into its activities, interventions, and functions. An HIV prevention program developed collaboratively from the ground up for Latino gay/bisexual men is presented. Results from the program evaluation efforts across the years suggest promise for testing its efficacy through a randomized trial. HIV prevention efforts need to develop dynamic support systems within communities where these men have ownership, have control, and feel safe; otherwise HIV infection rates in this population will increase. Copyright 2009 by the American Psychological Association

  9. Community empowerment and community cohesion: parallel agendas for community building in England?

    Directory of Open Access Journals (Sweden)

    Marjorie Mayo

    2009-02-01

    Full Text Available Community empowerment and community capacity building have been central to government agendas in Britain over the past decade. Agendas for tackling the so-called ‘War on Terrorism’ and promoting community cohesion have become increasingly significant in addition, especially since the bombings in London in 2005. This article focuses upon the current gap between these differing agendas. This is particularly relevant in an era of increasing globalisation, with considerable debate on the impact of migration, and anxieties about previous approaches to multiculturalism that have been the subject of growing criticism. Having set out these gaps in public policy and research in this field, the article examines the evidence from research, including 100 interviews together with focus groups conducted in three localities in England, identifying the problems, in terms of the lack of engagement of ‘new communities’ and in terms of the potential tensions within and between communities. There was, however, encouraging evidence that strategies were being developed to develop more inclusive, more democratically accountable and more effective forms of community engagement. The article concludes by summarising potential implications for building community cohesion and social solidarity.

  10. Evaluating Community-Based Participatory Research to Improve Community-Partnered Science and Community Health

    Science.gov (United States)

    Hicks, Sarah; Duran, Bonnie; Wallerstein, Nina; Avila, Magdalena; Belone, Lorenda; Lucero, Julie; Magarati, Maya; Mainer, Elana; Martin, Diane; Muhammad, Michael; Oetzel, John; Pearson, Cynthia; Sahota, Puneet; Simonds, Vanessa; Sussman, Andrew; Tafoya, Greg; Hat, Emily White

    2013-01-01

    Background Since 2007, the National Congress of American Indians (NCAI) Policy Research Center (PRC) has partnered with the Universities of New Mexico and Washington to study the science of community-based participatory research (CBPR). Our goal is to identify facilitators and barriers to effective community–academic partnerships in American Indian and other communities, which face health disparities. Objectives We have described herein the scientific design of our National Institutes of Health (NIH)-funded study (2009–2013) and lessons learned by having a strong community partner leading the research efforts. Methods The research team is implementing a mixed-methods study involving a survey of principal investigators (PIs) and partners across the nation and in-depth case studies of CBPR projects. Results We present preliminary findings on methods and measures for community-engaged research and eight lessons learned thus far regarding partnership evaluation, advisory councils, historical trust, research capacity development of community partner, advocacy, honoring each other, messaging, and funding. Conclusions Study methodologies and lessons learned can help community–academic research partnerships translate research in communities. PMID:22982842

  11. The environment and community relations

    International Nuclear Information System (INIS)

    Odogwu, E.C.

    1991-01-01

    Even though the petroleum industry in Nigeria has become the back bone of the Nigerian economy the relationship with the communities in the oil producing area is not all what it should be. There has been a significant shift in emphasis from the earlier peaceful and cordial relationship to the present more vocal sometimes violent relationship from a few communities who would like to see the operator held responsible for all environmental lapses of the past 50 years of oil operations in Nigeria. As the leading and most visible oil producer, we experience our share of strained relations in proportion to the size and extent of Shell's operations. Social unrest in the oil producing areas can be attributed to the frequent complaint by the communities of gross neglect by the oil producing companies and the Federal Government of Nigeria in the development of their areas. The community's feeling in that the level of compensation from environmental pollution is not sufficient to compensate the damage caused and this affects good community relations. Also, some communities feel that despite the taxes and royalties paid by multinational companies that, most of the petroleum profit from their God-given wealth is being taken away by such multinationals for development elsewhere. This feeling stems from the perceived glaring disparity between developments in the urban and rural areas where oil operations are carried out. This paper is an attempt to examine the social problems associated with oil exploration and production and the related environmental pollution therefrom and proffer suggestions on how such problems can be solved for good community relations

  12. Community detection using preference networks

    Science.gov (United States)

    Tasgin, Mursel; Bingol, Haluk O.

    2018-04-01

    Community detection is the task of identifying clusters or groups of nodes in a network where nodes within the same group are more connected with each other than with nodes in different groups. It has practical uses in identifying similar functions or roles of nodes in many biological, social and computer networks. With the availability of very large networks in recent years, performance and scalability of community detection algorithms become crucial, i.e. if time complexity of an algorithm is high, it cannot run on large networks. In this paper, we propose a new community detection algorithm, which has a local approach and is able to run on large networks. It has a simple and effective method; given a network, algorithm constructs a preference network of nodes where each node has a single outgoing edge showing its preferred node to be in the same community with. In such a preference network, each connected component is a community. Selection of the preferred node is performed using similarity based metrics of nodes. We use two alternatives for this purpose which can be calculated in 1-neighborhood of nodes, i.e. number of common neighbors of selector node and its neighbors and, the spread capability of neighbors around the selector node which is calculated by the gossip algorithm of Lind et.al. Our algorithm is tested on both computer generated LFR networks and real-life networks with ground-truth community structure. It can identify communities accurately in a fast way. It is local, scalable and suitable for distributed execution on large networks.

  13. Machine Learning Biogeographic Processes from Biotic Patterns: A New Trait-Dependent Dispersal and Diversification Model with Model Choice By Simulation-Trained Discriminant Analysis.

    Science.gov (United States)

    Sukumaran, Jeet; Economo, Evan P; Lacey Knowles, L

    2016-05-01

    Current statistical biogeographical analysis methods are limited in the ways ecology can be related to the processes of diversification and geographical range evolution, requiring conflation of geography and ecology, and/or assuming ecologies that are uniform across all lineages and invariant in time. This precludes the possibility of studying a broad class of macroevolutionary biogeographical theories that relate geographical and species histories through lineage-specific ecological and evolutionary dynamics, such as taxon cycle theory. Here we present a new model that generates phylogenies under a complex of superpositioned geographical range evolution, trait evolution, and diversification processes that can communicate with each other. We present a likelihood-free method of inference under our model using discriminant analysis of principal components of summary statistics calculated on phylogenies, with the discriminant functions trained on data generated by simulations under our model. This approach of model selection by classification of empirical data with respect to data generated under training models is shown to be efficient, robust, and performs well over a broad range of parameter space defined by the relative rates of dispersal, trait evolution, and diversification processes. We apply our method to a case study of the taxon cycle, that is testing for habitat and trophic level constraints in the dispersal regimes of the Wallacean avifaunal radiation. ©The Author(s) 2015. Published by Oxford University Press, on behalf of the Society of Systematic Biologists. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. The expression of light-related leaf functional traits depends on the location of individual leaves within the crown of isolated Olea europaea trees.

    Science.gov (United States)

    Escribano-Rocafort, Adrián G; Ventre-Lespiaucq, Agustina B; Granado-Yela, Carlos; Rubio de Casas, Rafael; Delgado, Juan A; Balaguer, Luis

    2016-04-01

    The spatial arrangement and expression of foliar syndromes within tree crowns can reflect the coupling between crown form and function in a given environment. Isolated trees subjected to high irradiance and concomitant stress may adjust leaf phenotypes to cope with environmental gradients that are heterogeneous in space and time within the tree crown. The distinct expression of leaf phenotypes among crown positions could lead to complementary patterns in light interception at the crown scale. We quantified eight light-related leaf traits across 12 crown positions of ten isolated Olea europaea trees in the field. Specifically, we investigated whether the phenotypic expression of foliar traits differed among crown sectors and layers and five periods of the day from sunrise to sunset. We investigated the consequences in terms of the exposed area of the leaves at the tree scale during a single day. All traits differed among crown positions except the length-to-width ratio of the leaves. We found a strong complementarity in the patterns of the potential exposed area of the leaves among day periods as a result of a non-random distribution of leaf angles across the crown. Leaf exposure at the outer layer was below 60 % of the displayed surface, reaching maximum interception during morning periods. Daily interception increased towards the inner layer, achieving consecutive maximization from east to west positions within the crown, matching the sun's trajectory. The expression of leaf traits within isolated trees of O. europaea varies continuously through the crown in a gradient of leaf morphotypes and leaf angles depending on the exposure and location of individual leaves. The distribution of light-related traits within the crown and the complementarity in the potential exposure patterns of the leaves during the day challenges the assumption of low trait variability within individuals. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Managing Communities – Mining MNEs’ Community Risk Management Practices

    DEFF Research Database (Denmark)

    Taarup Esbensen, Jacob

    This PhD reflects the effort to close a gap in the multinational enterprise (MNE) risk management literature on the identification and mitigation of risk arising from local communities. Small villages and towns that are situated geographically close to the MNEs’ place of operation have increasingly......-to-date information about mining MNE operations. This improved outreach has meant that mines have been closed due to conflicts with local communities and therefor a need had arisen for MNEs to implement management practices that can effectively mitigate these types of risks....... been identified as a source of risk (BSR, 2003; ICMM, 2015). The mining industry is one of the most exposed to risks from local communities, where there historically have been many conflicts between mine owners on one side and the people living close to the mine on the other (Godoy, 1985; Hoskin, 1912...

  16. The offshore benthic fish community

    Science.gov (United States)

    Lantry, Brian F.; Lantry, Jana R.; Weidel, Brian C.; Walsh, Maureen; Hoyle, James A.; Schaner, Teodore; Neave, Fraser B.; Keir, Michael

    2014-01-01

    Lake Ontario’s offshore benthic fish community includes primarily slimy sculpin, lake whitefish, rainbow smelt, lake trout, burbot, and sea lamprey. Of these, lake trout have been the focus of an international restoration effort for more than three decades (Elrod et al. 1995; Lantry and Lantry 2008). The deepwater sculpin and three species of deepwater ciscoes (Coregonus spp.) that were historically important in the offshore benthic zone became rare or were extirpated by the 1960s (Christie 1973; Owens et al. 2003; Lantry et al. 2007b; Roth et al. 2013). Ecosystem changes continue to influence the offshore benthic fish community, including the effects of dreissenid mussels, the near disappearance of burrowing amphipods (Diporeia spp.) (Dermott et al. 2005; Watkins et al. 2007), and the increased abundance and expanded geographic distribution of round goby (see Nearshore Fish Community chapter) (Lantry et al. 2007b). The fish-community objectives for the offshore benthic fish community, as described by Stewart et al. (1999), are:

  17. In-Drift Microbial Communities

    Energy Technology Data Exchange (ETDEWEB)

    D. Jolley

    2000-11-09

    As directed by written work direction (CRWMS M and O 1999f), Performance Assessment (PA) developed a model for microbial communities in the engineered barrier system (EBS) as documented here. The purpose of this model is to assist Performance Assessment and its Engineered Barrier Performance Section in modeling the geochemical environment within a potential repository drift for TSPA-SR/LA, thus allowing PA to provide a more detailed and complete near-field geochemical model and to answer the key technical issues (KTI) raised in the NRC Issue Resolution Status Report (IRSR) for the Evolution of the Near Field Environment (NFE) Revision 2 (NRC 1999). This model and its predecessor (the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document, CRWMS M and O 1998a) was developed to respond to the applicable KTIs. Additionally, because of the previous development of the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a), the M and O was effectively able to resolve a previous KTI concern regarding the effects of microbial processes on seepage and flow (NRC 1998). This document supercedes the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a). This document provides the conceptual framework of the revised in-drift microbial communities model to be used in subsequent performance assessment (PA) analyses.

  18. Profiting from innovative user communities

    DEFF Research Database (Denmark)

    Jeppesen, Lars Bo

    Modding - the modification of existing products by consumers - is increasingly exploited by manufacturers to enhance product development and sales. In the computer games industry modding has evolved into a development model in which users act as unpaid `complementors' to manufacturers' product pl......, a manufacturer can incorporate and commercialize the best complements found in the user communities. Keywords: innovation, modding, user communities, software platform, business model. JEL code(s): L21; L23; O31; O32...... platforms. This article explains how manufacturers can profit from their abilities to organize and facilitate a process of innovation by user communities and capture the value of the innovations produced in such communities. When managed strategically, two distinct, but not mutually exclusive business...... models appear from the production of user complements: firstly, a manufacturer can let the (free) user complements `drift' in the user communities, where they increase the value to consumers of owning the given platform and thus can be expected to generate increased platform sales, and secondly...

  19. In-Drift Microbial Communities

    International Nuclear Information System (INIS)

    Jolley, D.

    2000-01-01

    As directed by written work direction (CRWMS M and O 1999f), Performance Assessment (PA) developed a model for microbial communities in the engineered barrier system (EBS) as documented here. The purpose of this model is to assist Performance Assessment and its Engineered Barrier Performance Section in modeling the geochemical environment within a potential repository drift for TSPA-SR/LA, thus allowing PA to provide a more detailed and complete near-field geochemical model and to answer the key technical issues (KTI) raised in the NRC Issue Resolution Status Report (IRSR) for the Evolution of the Near Field Environment (NFE) Revision 2 (NRC 1999). This model and its predecessor (the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document, CRWMS M and O 1998a) was developed to respond to the applicable KTIs. Additionally, because of the previous development of the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a), the M and O was effectively able to resolve a previous KTI concern regarding the effects of microbial processes on seepage and flow (NRC 1998). This document supercedes the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a). This document provides the conceptual framework of the revised in-drift microbial communities model to be used in subsequent performance assessment (PA) analyses

  20. Experience Learning and Community Development

    Directory of Open Access Journals (Sweden)

    Nena Mijoč

    1996-12-01

    Full Text Available Research in the field of education, carried out in living and working environment, which has undergone so profound changes recently, is of extreme importance. In schools, courses and seminars, one cannot prepare him/herself for the changes as these are often so rapid that it is impossible to foresee them. Therefore, one can only learn by experience. In defining the term 'experience learning', the teoreticians vary greatly. In this paper, experience learning is understood as a process of learning taking part mainly outside the planned educational process and including an active and participative attitude towards environment and people. Original and direct experience can thus serve as a basis for gaining new comprehensions, for planning future activities as well as for a reinterpretation of the past experiences. Let us first mention the basic factors of successful experience learning, such as an individual's character features, possibilities for learning, learning atmosphere and positive stimulations. It has been estimated that local community can increase or decrease the possibilities for experience learning. However, the relation is active in other direction too: the more experience learning bas been asserted in a community, the greater its influence on social and cultural development of the community. On has to bear in mind that well-planned education for local community and stimulating sociocultural animation can facilitate the development of local community.