Assessing Intercultural Training Designs

Science.gov (United States)

Graf, Andrea

2004-01-01

Training designs are critical to the success of intercultural training programmes. A common typology for classifying intercultural training designs distinguishes among the following dimensions: experiential discovery versus didactic expository and culture-specific versus culture-general training. The purpose of this paper is to assess different…

Decoupling Control Design for the Module Suspension Control System in Maglev Train

Directory of Open Access Journals (Sweden)

Guang He

2015-01-01

Full Text Available An engineering oriented decoupling control method for the module suspension system is proposed to solve the coupling issues of the two levitation units of the module in magnetic levitation (maglev train. According to the format of the system transfer matrix, a modified adjoint transfer matrix based decoupler is designed. Then, a compensated controller is obtained in the light of a desired close loop system performance. Optimization between the performance index and robustness index is also carried out to determine the controller parameters. However, due to the high orders and complexity of the obtained resultant controller, model reduction method is adopted to get a simplified controller with PID structure. Considering the modeling errors of the module suspension system as the uncertainties, experiments have been performed to obtain the weighting function of the system uncertainties. By using this, the robust stability of the decoupled module suspension control system is checked. Finally, the effectiveness of the proposed decoupling design method is validated by simulations and physical experiments. The results illustrate that the presented decoupling design can result in a satisfactory decoupling and better dynamic performance, especially promoting the reliability of the suspension control system in practical engineering application.

Performance Analysis and Evaluation of Advanced Designs for Radio Communication Systems for Communications-Based Train Control (CBTC)

DEFF Research Database (Denmark)

Farooq, Jahanzeb

-consuming process associated with a certain delay. Additionally, these APs are connected to the wayside infrastructure via optical fiber cables that incurs huge costs. To address these problems, a novel design of the CBTC trackside network was proposed at Siemens. In this design, trackside nodes function in ad......Communications-Based Train Control (CBTC) is a modern signalling system that uses radio communication to enable the exchange of high resolution and real-time train control information between the train and the wayside infrastructure. A vast majority of CBTC systems worldwide use IEEE 802.11 Wi......-hoc Wi-Fi mode, which means no associations have to be performed with them prior to transmitting. A train simply broadcasts packets. A node upon receiving these packets forwards them to the next node and so on, forming a chain of nodes. Following this chain, packets arrive at the destination. To minimize...

Computer Based Training Authors' and Designers' training

Directory of Open Access Journals (Sweden)

Frédéric GODET

2016-03-01

Full Text Available This communication, through couple of studies driven since 10 years, tries to show how important is the training of authors in Computer Based Training (CBT. We submit here an approach to prepare designers mastering Interactive Multimedia modules in this domain. Which institutions are really dedicating their efforts in training authors and designers in this area of CBTs? Television devices and broadcast organisations offered since year 60s' a first support for Distance Learning. New media, New Information and Communication Technologies (NICT allowed several public and private organisations to start Distance Learning projects. As usual some of them met their training objectives, other of them failed. Did their really failed? Currently, nobody has the right answer. Today, we do not have enough efficient tools allowing us to evaluate trainees' acquisition in a short term view. Training evaluation needs more than 10 to 20 years of elapsed time to bring reliable measures. Nevertheless, given the high investments already done in this area, we cannot wait until the final results of the pedagogical evaluation. A lot of analyses showed relevant issues which can be used as directions for CBTs authors and designers training. Warning - Our studies and the derived conclusions are mainly based on projects driven in the field. We additionally bring our several years experience in the training of movie film authors in the design of interactive multimedia products. Some of our examples are extracting from vocational training projects where we were involved in all development phases from the analysis of needs to the evaluation of the acquisition within the trainee's / employee job's. Obviously, we cannot bring and exhaustive approach in this domain where a lot of parameters are involved as frame for the CBT interactive multimedia modules authors' and designers' training.

THE ARCHITECTURE OF MULTI-COMPONENT DISTRIBUTED HYBRID EXPERT TRAINING SYSTEM

Directory of Open Access Journals (Sweden)

Оleh Shevchuk

2016-09-01

Full Text Available The paper reports on the design of a multi-component architecture of distributed hybrid expert training system that can be used for the study of knowledge base of both internal and external expert systems and artificial intelligence systems that are distributed on Internet servers and other computer networks. Expert training system is based on three groups of basic principles: cybernetic, reflecting experience of previous research of systems of artificial intelligence, expert training systems; pedagogical, determining the principles, on which pedagogical design and use of expert training systems are based; psychological, determining preconditious and understanding of pupils psychics, on which the processes of design and use of expert training systems in professional training of future specialists are based.It accounts for the efficient training through the distributed knowledge via the Internet, which greatly increases the didactic capabilities of the system.

Computer aided training system development

International Nuclear Information System (INIS)

Midkiff, G.N.

1987-01-01

The first three phases of Training System Development (TSD) -- job and task analysis, curriculum design, and training material development -- are time consuming and labor intensive. The use of personal computers with a combination of commercial and custom-designed software resulted in a significant reduction in the man-hours required to complete these phases for a Health Physics Technician Training Program at a nuclear power station. This paper reports that each step in the training program project involved the use of personal computers: job survey data were compiled with a statistical package, task analysis was performed with custom software designed to interface with a commercial database management program. Job Performance Measures (tests) were generated by a custom program from data in the task analysis database, and training materials were drafted, edited, and produced using commercial word processing software

Delivering Training for Highly Demanding Information Systems

Science.gov (United States)

Norton, Andrew Lawrence; Coulson-Thomas, Yvette May; Coulson-Thomas, Colin Joseph; Ashurst, Colin

2012-01-01

Purpose: There is a lack of research covering the training requirements of organisations implementing highly demanding information systems (HDISs). The aim of this paper is to help in the understanding of appropriate training requirements for such systems. Design/methodology/approach: This research investigates the training delivery within a…

Design and Evaluation of a Cross-Cultural Training System

Science.gov (United States)

Santarelli, Thomas; Stagl, Kevin C.

2011-01-01

Cross-cultural competency, and the underlying communication and affective skills required to develop such expertise, is becoming increasingly important for a wide variety of domains. To address this need, we developed a blended learning platform which combines virtual role-play with tutorials, assessment and feedback. A Middle-Eastern Curriculum (MEC) exemplar for cross-cultural training U.S. military personnel was developed to guide the refinement of an existing game-based training platform. To complement this curriculum, we developed scenario authoring tools to enable end-users to define training objectives, link performance measures and feedback/remediation to these objectives, and deploy experiential scenarios within a game-based virtual environment (VE). Lessons learned from the design and development of this exemplar cross-cultural competency curriculum, as well as formative evaluation results, are discussed. Initial findings suggest that the underlying training technology promotes deep levels of semantic processing of the key information of relevant cultural and communication skills.

Design of the ILC Prototype FONT4 Digital Intra-Train Beam-Based Feedback System

International Nuclear Information System (INIS)

Burrows, P.; Queen Mary, U. of London; Christian, G.B.; Hartin, A.F.; Dabiri Khah, H.; White, G.R.; Oxford U.; Clarke, C.C.; Perry, C.; Oxford Instruments; Kalinin, A.; Daresbury; McCormick, D.J.; Molloy, S.; Ross, M.C.; SLAC

2007-01-01

We present the design of the FONT4 digital intra-train beam position feedback system prototype and preliminary results of initial beam tests at the Accelerator Test Facility (ATF) at KEK. The feedback system incorporates a fast analogue beam position monitor (BPM) front-end signal processor, a digital feedback board, and a kicker driver amplifier. The short bunchtrain, comprising 3 electron bunches separated by c. 150ns, in the ATF extraction line was used to test components of the prototype feedback system

Job training planning and design for process plant operators

International Nuclear Information System (INIS)

Wirstad, J.

1983-01-01

A method is presented by which process plant operators for nuclear power plants are trained in Sweden. It works by a top-down method of systems analysis which can be integrated into the analysis, specification, and design of the process automation system. The training methods can also be adapted to existing automation systems and operating schedules. The author's method is based on the principle that training programs should be based on job requirements, e.g. operator tasks in common, less frequent, and rare operating conditions. Procedures have been tested for the following steps: Job analysis, analysis of knowledge and experience required, analysis of operator training requirements, set-up and organisation of the training programme, achievement control, evaluation of the training programme. (orig./HP) [de

Job training planning and design for process plant operators

Energy Technology Data Exchange (ETDEWEB)

Wirstad, J.

1983-01-01

A method is presented by which process plant operators for nuclear power plants are trained in Sweden. It works by a top-down method of systems analysis which can be integrated into the analysis, specification, and design of the process automation system. The training methods can also be adapted to existing automation systems and operating schedules. The author's method is based on the principle that training programs should be based on job requirements, e.g. operator tasks in common, less frequent, and rare operating conditions. Procedures have been tested for the following steps: Job analysis, analysis of knowledge and experience required, analysis of operator training requirements, set-up and organisation of the training programme, achievement control, evaluation of the training programme.

Design of Training Systems, Phase II Report, Volume III; Model Program Descriptions and Operating Procedures. TAEG Report No. 12-2.

Science.gov (United States)

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

The Design of Training Systems (DOTS) project was initiated by the Department of Defense (DOD) to develop tools for the effective management of military training organizations. Volume 3 contains the model and data base program descriptions and operating procedures designed for phase 2 of the project. Flow charts and program listings for the…

Design and Development of a Severe Accident Training System

International Nuclear Information System (INIS)

Kim, Ko Ryu; Park, Sun Hee; Kim, Dong Ha

2005-01-01

The nuclear plants' severe accidents have two big characteristics. One is that they are very rare accidents, and the other is that they bring extreme conditions such as the high pressure and temperature in their process. It is, therefore, very hard to get the severe accident data, without inquiring that the data should be real or experimental. In fact, most of severe accident analyses rely on the simulation codes where almost all severe accident knowledge is contained. These codes are, however, programmed by the Fortran language, so that their output are typical text files which are very complicated. To avoid this kind of difficulty in understanding the code output data, several kinds of graphic user interface (GUI) programs could be developed. In this paper, we will introduce a GUI system for severe accident management and training, partly developed and partly in design stage

GESAT: System for management and evaluation of training programs

International Nuclear Information System (INIS)

Arjona, O.; Venegas, M.; Rodriguez, L.; Lopez, M.

1997-01-01

This paper describe the criteria considered to design the GESAT system, the elements considered to select the relational model, selection of the database language and the main features and possibilities of this system. GESAT allow the management of training programs based on the Systematic Approach to Training. Include the information related with all SAT phases, the results of the job analysis, training plans design, development of materials, training implementation, and the subsequent evaluation

Design of a decision support system, trained on GPU, for assisting melanoma diagnosis in dermatoscopy images

Science.gov (United States)

Glotsos, Dimitris; Kostopoulos, Spiros; Lalissidou, Stella; Sidiropoulos, Konstantinos; Asvestas, Pantelis; Konstandinou, Christos; Xenogiannopoulos, George; Konstantina Nikolatou, Eirini; Perakis, Konstantinos; Bouras, Thanassis; Cavouras, Dionisis

2015-09-01

The purpose of this study was to design a decision support system for assisting the diagnosis of melanoma in dermatoscopy images. Clinical material comprised images of 44 dysplastic (clark's nevi) and 44 malignant melanoma lesions, obtained from the dermatology database Dermnet. Initially, images were processed for hair removal and background correction using the Dull Razor algorithm. Processed images were segmented to isolate moles from surrounding background, using a combination of level sets and an automated thresholding approach. Morphological (area, size, shape) and textural features (first and second order) were calculated from each one of the segmented moles. Extracted features were fed to a pattern recognition system assembled with the Probabilistic Neural Network Classifier, which was trained to distinguish between benign and malignant cases, using the exhaustive search and the leave one out method. The system was designed on the GPU card (GeForce 580GTX) using CUDA programming framework and C++ programming language. Results showed that the designed system discriminated benign from malignant moles with 88.6% accuracy employing morphological and textural features. The proposed system could be used for analysing moles depicted on smart phone images after appropriate training with smartphone images cases. This could assist towards early detection of melanoma cases, if suspicious moles were to be captured on smartphone by patients and be transferred to the physician together with an assessment of the mole's nature.

Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG

Directory of Open Access Journals (Sweden)

Xiaoliang Zhang

2017-03-01

Full Text Available The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1 a wireless wearable EEG collection; (2 train driver vigilance detection; and (3 early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI device acquires the locomotive driver’s brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC via Bluetooth. In the second step, a support vector machine (SVM classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT to extract the EEG power spectrum density (PSD. In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety.

Design and application of radiation apparatus for sup 6 sup 0 Co cargo train on-line inspection system

CERN Document Server

Wu Zhi Fang; Zhang Yuai

2002-01-01

Based on the special requirement for radiation apparatus of sup 6 sup 0 Co cargo train on-line inspection system, a radiation apparatus including two-level shutter, working container, storing container and electromagnetism are designed. The makeup, working mode and functional realization of the radiation apparatus are introduced. The system is used in Manzhouli customs cargo train on-line inspection system. The practice shows that the radiation apparatus is reliable to work steadily and the operating speed of the main shutter can reach 0.1 s open and 0.15 s close

Tongue motor training support system.

Science.gov (United States)

Sasaki, Makoto; Onishi, Kohei; Nakayama, Atsushi; Kamata, Katsuhiro; Stefanov, Dimitar; Yamaguchi, Masaki

2014-01-01

In this paper, we introduce a new tongue-training system that can be used for improvement of the tongue's range of motion and muscle strength after dysphagia. The training process is organized in game-like manner. Initially, we analyzed surface electromyography (EMG) signals of the suprahyoid muscles of five subjects during tongue-training motions. This test revealed that four types tongue training motions and a swallowing motion could be classified with 93.5% accuracy. Recognized EMG signals during tongue motions were designed to allow control of a mouse cursor via intentional tongue motions. Results demonstrated that simple PC games could be played by tongue motions, achieving in this way efficient, enjoyable and pleasant tongue training. Using the proposed method, dysphagia patients can choose games that suit their preferences and/or state of mind. It is expected that the proposed system will be an efficient tool for long-term tongue motor training and maintaining patients' motivation.

''Training plan optimized design'' methodology application to IBERDROLA - Power generation

International Nuclear Information System (INIS)

Gil, S.; Mendizabal, J.L.

1996-01-01

The trend in both Europe and the United States, towards the understanding that no training plan may be considered suitable if not backed by the results of application of the S.A.T. (Systematic Approach to Training) methodology, led TECNATOM, S.A. to apply thy methodology through development of an application specific to the conditions of the Spanish working system. The requirement that design of the training be coherent with the realities of the working environment is met by systematic application of the SAT methodology as part of the work analysis and job-based task analysis processes, this serving as a basis for design of the training plans

Design of 3D simulation engine for oilfield safety training

Science.gov (United States)

Li, Hua-Ming; Kang, Bao-Sheng

2015-03-01

Aiming at the demand for rapid custom development of 3D simulation system for oilfield safety training, this paper designs and implements a 3D simulation engine based on script-driven method, multi-layer structure, pre-defined entity objects and high-level tools such as scene editor, script editor, program loader. A scripting language been defined to control the system's progress, events and operating results. Training teacher can use this engine to edit 3D virtual scenes, set the properties of entity objects, define the logic script of task, and produce a 3D simulation training system without any skills of programming. Through expanding entity class, this engine can be quickly applied to other virtual training areas.

The computer aided education and training system for accident management

International Nuclear Information System (INIS)

Yoneyama, Mitsuru; Kubota, Ryuji; Fujiwara, Tadashi; Sakuma, Hitoshi

1999-01-01

The education and training system for Accident Management was developed by the Japanese BWR group and Hitachi Ltd. The education and training system is composed of two systems. One is computer aided instruction (CAI) education system and the education and training system with computer simulations. Both systems are designed to be executed on personal computers. The outlines of the CAI education system and the education and training system with simulator are reported below. These systems provides plant operators and technical support center staff with the effective education and training for accident management. (author)

Performance measurement system for training simulators. Interim report

International Nuclear Information System (INIS)

Bockhold, G. Jr.; Roth, D.R.

1978-05-01

In the first project phase, the project team has designed, installed, and test run on the Browns Ferry nuclear power plant training simulator a performance measurement system capable of automatic recording of statistical information on operator actions and plant response. Key plant variables and operator actions were monitored and analyzed by the simulator computer for a selected set of four operating and casualty drills. The project has the following objectives: (1) To provide an empirical data base for statistical analysis of operator reliability and for allocation of safety and control functions between operators and automated controls; (2) To develop a method for evaluation of the effectiveness of control room designs and operating procedures; and (3) To develop a system for scoring aspects of operator performance to assist in training evaluations and to support operator selection research. The performance measurement system has shown potential for meeting the research objectives. However, the cost of training simulator time is high; to keep research program costs reasonable, the measurement system is being designed to be an integral part of operator training programs. In the pilot implementation, participating instructors judged the measurement system to be a valuable and objective extension of their abilities to monitor trainee performance

Advanced training systems

Science.gov (United States)

Savely, Robert T.; Loftin, R. Bowen

1990-01-01

Training is a major endeavor in all modern societies. Common training methods include training manuals, formal classes, procedural computer programs, simulations, and on-the-job training. NASA's training approach has focussed primarily on on-the-job training in a simulation environment for both crew and ground based personnel. NASA must explore new approaches to training for the 1990's and beyond. Specific autonomous training systems are described which are based on artificial intelligence technology for use by NASA astronauts, flight controllers, and ground based support personnel that show an alternative to current training systems. In addition to these specific systems, the evolution of a general architecture for autonomous intelligent training systems that integrates many of the features of traditional training programs with artificial intelligence techniques is presented. These Intelligent Computer Aided Training (ICAT) systems would provide much of the same experience that could be gained from the best on-the-job training.

LQG/LTR [linear quadratic Gaussian with loop transfer recovery] robust control system design for a low-pressure feedwater heater train

International Nuclear Information System (INIS)

Murphy, G.V.; Bailey, J.M.

1990-01-01

This paper uses the linear quadratic Gaussian with loop transfer recovery (LQG/LTR) control system design method to obtain a level control system for a low-pressure feedwater heater train. The control system performance and stability robustness are evaluated for a given set of system design specifications. The tools for analysis are the return ratio, return difference, and inverse return difference singular-valve plots for a loop break at the plant output. 3 refs., 7 figs., 2 tabs

Extended attention span training system

Science.gov (United States)

Pope, Alan T.; Bogart, Edward H.

1991-01-01

Attention Deficit Disorder (ADD) is a behavioral disorder characterized by the inability to sustain attention long enough to perform activities such as schoolwork or organized play. Treatments for this disorder include medication and brainwave biofeedback training. Brainwave biofeedback training systems feed back information to the trainee showing him how well he is producing the brainwave pattern that indicates attention. The Extended Attention Span Training (EAST) system takes the concept a step further by making a video game more difficult as the player's brainwaves indicate that attention is waning. The trainee can succeed at the game only by maintaining an adequate level of attention. The EAST system is a modification of a biocybernetic system that is currently being used to assess the extent to which automated flight management systems maintain pilot engagement. This biocybernetic system is a product of a program aimed at developing methods to evaluate automated flight deck designs for compatibility with human capabilities. The EAST technology can make a contribution in the fields of medical neuropsychology and neurology, where the emphasis is on cautious, conservative treatment of youngsters with attention disorders.

Virtual-Reality training system for nuclear security

International Nuclear Information System (INIS)

Nonaka, Nobuyuki

2012-01-01

At the Integrated Support Center for Nuclear Nonproliferation and Nuclear Security (ISCN) of the Japan Atomic Energy Agency, the virtual reality (VR) training system is under development for providing a practical training environment to implement experience-oriented and interactive lessons on nuclear security for wide range of participants in human resource development assistance program mainly to Asian emerging nuclear-power countries. This system electrically recreates and visualizes nuclear facilities and training conditions in stereoscopic (3D) view on a large-scale display (CAVE system) as virtual reality training facility (VR facility) and it provides training participants with effective environments to learn installation and layout of security equipment in the facility testing and verifying visually the protection performances under various situations such as changes in day-night lighting and weather conditions, which may lead to practical exercise in the design and evaluation of the physical protection system. This paper introduces basic concept of the system and outline of training programs as well as featured aspects in using the VR technology for the nuclear security. (author)

Deployment of an in-house designed training process in a quaternary care hospital.

Science.gov (United States)

Kumar, Ajit; Bhatia, Saurabh; Chiang, I-Jen

2013-01-01

Healthcare providers, such as doctors and nurses, have been famous for high resistance to change. A careful change management plan, particularly training process, is utmost necessary. A quaternary care hospital in India changed its system, from manual to Electronic Medical Record/Health Information System (EMR/HIS). The hospital management wanted to train its 4000 diverse end-users on the EMR/HIS in two months' time. This paper describes an in-house designed training process and its deployment in the given healthcare organizational settings. We designed a training process named DRIPDA. The training process was deployed to train 4000 end-users of EMR/HIS, in the quaternary care hospital. Various factors, such as methods and tools of training, constraints of trainees, trainers, and organization were considered while deploying the training process. The effectiveness of the DRIPDA was assessed using the Kirkpatrick model. End-users received training on the new system only in 25% of estimated time and 28% of the projected expense, without having any distraction in their usual workflow, or any productivity loss. We found that the DRIPDA training process could train all employees effectively and efficiently. A decent training process can help in managing the change, thereby reduce the training time and cost.

Major Results from 1-Train Passive Safety System Tests for the SMART Design with the SMART-ITL Facility

Energy Technology Data Exchange (ETDEWEB)

Park, Hyun-Sik; Bae, Hwang; Ryu, Sung-Uk; Jeon, Byong-Guk; Ruy, Hyobong; Kim, Woo-Shik; Byun, Sun-Joon; Shin, Yong-Cheol; Min, Kyoung-Ho; Yi, Sung-Jae [KAERI, Daejeon (Korea, Republic of)

2015-05-15

To satisfy the domestic and international needs for nuclear safety improvement after the Fukushima accident, an effort to improve its safety has been studied, and a Passive Safety System (PSS) for SMART has been designed. In addition, an Integral Test Loop for the SMART design (SMART-ITL, or FESTA) has been constructed and it finished its commissioning tests in 2012. Consequently, a set of Design Base Accident (DBA) scenarios have been simulated using SMARTITL. Recently, a test program to validate the performance of the SMART PSS was launched and its scaled-down test facility was additionally installed at the existing SMART-ITL facility. In this paper, the major results from the 1-train passive safety system validation tests with the SMARTITL facility will be summarized. The acquired data will be used to validate the safety analysis code and its related models, to evaluate the performance of SMART PSS, and to provide base data during the application phase of the SDA revision and construction licensing. In this paper, the major results from the validation tests of the SMART passive safety system using a 1-train test facility were summarized. They include a dozen of SMART PSS tests using 1-train SMART PSS tests. From the test results, it was estimated that the SMART PSS has sufficient cooling capability to deal with the SBLOCA scenario of SMART. During the SBLOCA scenario, in the CMT, the water layer inventory was well stratified thermally and the safety injection water was injected efficiently into the RPV from the initial period, and cools down the RCS properly.

Optoelectronics applications in multimedia shooting training systems: SPARTAN

Science.gov (United States)

Glogowski, Tomasz; Hlosta, Pawel; Stepniak, Slawomir; Swiderski, Waldemar

2017-10-01

Multimedia shooting training systems are increasingly being used in the training of security staff and uniformed services. An advanced practicing-training system SPARTAN for simulation of small arms shooting has been designed and manufactured by Autocomp Management Ltd. and Military Institute of Armament Technology for the Polish Ministry of National Defence. SPARTAN is a stationary device designed to teach, monitor and evaluate the targeting of small arms and to prepare soldiers for: • firing the live ammunition at open ranges for combat targets and silhouettes • detection, classification and engagement of real targets upon different terrains, weather conditions and periods during the day • team work as a squad during the mission by using different types of arms • suitable reactions in untypical scenarios. Placed in any room the training set consists of: • the projection system that generates realistic 3D imaging of the battlefield (such as combat shooting range) in high-resolution • system that tracks weapons aiming points • sound system which delivers realistic mapping of acoustic surroundings • operator station with which the training is conducted and controlled • central processing unit based on PC computers equipped with specialist software realizing individual system functions • units of smart weapons equipped with radio communication modules, injection laser diodes and pneumatic reloading system. The system make possible training by firing in dynamic scenarios, using combat weapons and live ammunition against visible targets moving on a screen. The use of infrared camera for detecting the position of impact of a projectile.

Design of an Autonomous Social Orienting Training System (ASOTS) for Young Children With Autism.

Science.gov (United States)

Zheng, Zhi; Fu, Qiang; Zhao, Huan; Swanson, Amy R; Weitlauf, Amy S; Warren, Zachary E; Sarkar, Nilanjan

2017-06-01

Social communication is among the core areas of impairment for children with Autism Spectrum Disorders (ASD). The training of social orientation is important for improving social communication of children with ASD. In recent years, technology-assisted ASD intervention had gained momentum due to its potential advantages in terms of precision, sustainability, flexibility and cost. In this paper, we propose a closed-loop autonomous computer system, named ASOTS, for training social orientation skills to young children with ASD. This system is designed to detect and track a child's attention in response to social orientation bids and help the child towards appropriate social orientation when needed. Response to name, an important social orientation skill, was used to demonstrate the functionality of the proposed system. Ten toddlers with ASD participated in a pilot user study to show whether the system could be used on young children who have been diagnosed with ASD. Another pilot user study with 10 TD infants tested whether this system has a potential to be applied for early detection for infants who were younger than the age when ASD diagnoses can be done. This was done intentionally to separately demonstrate utility and functionality for the clinical population of interest and to demonstrate functionality beyond current clinical identification capacity (i.e., infants). The results showed that the proposed system and the protocol were well tolerated by both groups, successfully captured young children's attention, and elicited the desired behavior.

The Design of Model-Based Training Programs

Science.gov (United States)

Polson, Peter; Sherry, Lance; Feary, Michael; Palmer, Everett; Alkin, Marty; McCrobie, Dan; Kelley, Jerry; Rosekind, Mark (Technical Monitor)

1997-01-01

This paper proposes a model-based training program for the skills necessary to operate advance avionics systems that incorporate advanced autopilots and fight management systems. The training model is based on a formalism, the operational procedure model, that represents the mission model, the rules, and the functions of a modem avionics system. This formalism has been defined such that it can be understood and shared by pilots, the avionics software, and design engineers. Each element of the software is defined in terms of its intent (What?), the rationale (Why?), and the resulting behavior (How?). The Advanced Computer Tutoring project at Carnegie Mellon University has developed a type of model-based, computer aided instructional technology called cognitive tutors. They summarize numerous studies showing that training times to a specified level of competence can be achieved in one third the time of conventional class room instruction. We are developing a similar model-based training program for the skills necessary to operation the avionics. The model underlying the instructional program and that simulates the effects of pilots entries and the behavior of the avionics is based on the operational procedure model. Pilots are given a series of vertical flightpath management problems. Entries that result in violations, such as failure to make a crossing restriction or violating the speed limits, result in error messages with instruction. At any time, the flightcrew can request suggestions on the appropriate set of actions. A similar and successful training program for basic skills for the FMS on the Boeing 737-300 was developed and evaluated. The results strongly support the claim that the training methodology can be adapted to the cockpit.

Intelligent control of a planning system for astronaut training.

Science.gov (United States)

Ortiz, J; Chen, G

1999-07-01

This work intends to design, analyze and solve, from the systems control perspective, a complex, dynamic, and multiconstrained planning system for generating training plans for crew members of the NASA-led International Space Station. Various intelligent planning systems have been developed within the framework of artificial intelligence. These planning systems generally lack a rigorous mathematical formalism to allow a reliable and flexible methodology for their design, modeling, and performance analysis in a dynamical, time-critical, and multiconstrained environment. Formulating the planning problem in the domain of discrete-event systems under a unified framework such that it can be modeled, designed, and analyzed as a control system will provide a self-contained theory for such planning systems. This will also provide a means to certify various planning systems for operations in the dynamical and complex environments in space. The work presented here completes the design, development, and analysis of an intricate, large-scale, and representative mathematical formulation for intelligent control of a real planning system for Space Station crew training. This planning system has been tested and used at NASA-Johnson Space Center.

Electric system training with programmable controllers

International Nuclear Information System (INIS)

Benson, M.B.

1989-01-01

A power system simulator (PSS) for training system operators has been opened at the Pacific Gas and Electric Training Center at San Ramon, California. The simulator was designed as an instructional aid and is part of a larger, more comprehensive operating training facility. It has the capability of duplicating both routine and emergency situations for transmission and distribution lines, power plants, and substations. Modeled after nuclear plant simulators, the PSS utilizes state-of-the-art technology and is believed to be on the leading edge of power system simulators. The new operator training facility covers 10,000 ft/sup 2/ and is divided into four classrooms, two labs, three simulated dispatch centers, and various administrative offices. Ten full- and part-time instructors are on staff to train the over 900 system, power plant, agency, and trainee personnel. The simulator is considered the heart of the complex and covers over half of the available floor space. It is divided into two large rooms and further separated by the dispatch centers. The indoor room represents the high-voltage transmission and generating stations, the outdoor room is for both the lower-voltage distribution system and simulated physical equipment. In each room, full-size control boards (equipped with actual relay protection and automatic schemes) are arranged into various stations and lines

Superfund Hazard Ranking System Training Course

Science.gov (United States)

The Hazard Ranking System (HRS) training course is a four and ½ day, intermediate-level course designed for personnel who are required to compile, draft, and review preliminary assessments (PAs), site inspections (SIs), and HRS documentation records/packag

Optimizing Intermodal Train Schedules with a Design Balanced Network Design Model

DEFF Research Database (Denmark)

Pedersen, Michael Berliner; Crainic, Teodor Gabriel

We present a modeling approach for optimizing intermodal trains schedules based on an infrastructure divided into time-dependent train paths. The formulation can be generalized to a capacitated multi commodity network design model with additional design balance constraints. We present a Tabu Search...

Task-Specific Training and Job Design

OpenAIRE

Felipe Balmaceda

2006-01-01

This paper provides a simple theoretical framework based on a new type of human capital introduced by Gibbons and Waldman (2004), called task-specific training, to understand job design. Mainly, in the presence of task-specific training, promotions might result ex-post in the underutilization of human capital and thus firms at the time of designing jobs should attempt to diversify this risk.

Management and supervisory training: Changing the culture/system

International Nuclear Information System (INIS)

Martin, L.F.

1991-01-01

Professional development training courses, and a unique promoting appraisal system have been combined in the form of a training matrix and are being used as a culture change agent. This training and system modification is currently being implemented within the Nuclear Materials Processing Division of the Savannah River Site. It is designed to help solve the systems problems of managers and supervisors while enabling subordinates to develop themselves professionally, and starts with a promoting appraisal between a manager and a subordinate. These easy to apply appraisals are becoming an integral part of the business system, and result in giving a manager greater control over business change and greater influence over the work each employee accomplishes

Job analysis for training design and evaluation

International Nuclear Information System (INIS)

Andersson, H.; Baeck, P.; Wirstad, J.

1979-01-01

The report describes a job analysis method which has been used for competency requirements and training evaluation purposes on three jobs in a Swedish nuclear power station. The jobs are the shift supervisor, the reactor operator and the turbine operator. The method is based on a system analytical approach. Through a topdown analysis of the power generation system a structure is derived which is used for an inventory of possible operator tasks. The primary source for actual task generation was interviews with operators and with other personnel who are cooperating with the operators. The method suggests alternative sources for the task generation when operator interviews are not feasible, e.g. in systems which are being developed or when operator experiences are lacking. The result of the job analysis is a set of typical tasks for each job. These tasks represent the contents of the job to be considered in the planning of job training and for recruitment requirements. The same job analysis method was used for training design and evaluation in a Finnish nuclear power station. The concluding remarks of this report are made in the light of this study also. This report is based on a research project B15/77 from the Swedish Nuclear Power Inspectorate. (author)

Design sensitivities for interactive sport-training games

DEFF Research Database (Denmark)

Jensen, Mads Møller; Rasmussen, Majken Kirkegård; Grønbæk, Kaj

2014-01-01

and reflected upon. Based on the experiences gained from the design and development process, as well as examples from the existing field and skill acquisition theory, we present three areas of interest to consider for interactive sport-training game designers: Context Characteristics, Movement Patterns...... and Perceptual Reaction. From a discussion of these areas, we derive eight design sensitivities that emphasize issues, challenges and opportunities, important for the design, development and analysis of interactive sport-training games in general.......This paper presents the design and development process of an interactive football-training game that aims to improve players' ball-handling skills, and their ability to simultaneously survey the playing field. A small-scale experiment was conducted to test the game, and the results are presented...

DESIGN FOR A BI-PLANETARY GEAR TRAIN

Directory of Open Access Journals (Sweden)

Józef DREWNIAK

2016-06-01

Full Text Available The article presents the design for a bi-planetary gear train. The project description is supplemented with calculations of kinematics, statics and meshing efficiency of the gear wheels included in the gear train. Excluded are calculations of strength and geometry of gears, shaft and rolling bearing, since they are similar to classical calculations for planetary gears. An assembly drawing in 2D and assembly drawings in 3D of the designed bi-planetary gear train are also shown. This gear train will form the main element of the research in hand.

Computer based training for NPP personnel (interactive communication systems and functional trainers)

International Nuclear Information System (INIS)

Martin, H.D.

1987-01-01

KWU as a manufacturer of thermal and nuclear power plants has extensive customer training obligations within its power plant contracts. In this respect KWU has gained large experience in training of personnel, in the production of training material including video tapes an in the design of simulators. KWU developed interactive communication systems (ICS) for training and retraining purposes with a personal computer operating a video disc player on which video instruction is stored. The training program is edited with the help of a self developed editing system which enables the author to easily enter his instructions into the computer. ICS enables the plant management to better monitor the performance of its personnel through computerized training results and helps to save training manpower. German NPPs differ very much from other designs with respect to a more complex and integrated reactor control system and an additional reactor limitation system. Simulators for such plants therefore have also to simulate these systems. KWU developed a Functional Trainer (FT) which is a replica of the primary system, the auxiliary systems linked to it and the associated control, limitation and protection systems including the influences of the turbine operation and control

Astro. A multimedia System for training of personnel

International Nuclear Information System (INIS)

Garate Abenza, M.; Mercade Seijas, O.; Munoz, J.F.; Ruiz-Andino, J.L.

1994-01-01

ASTRO is an integrated software package used to train system operators and is directly applicable to all types of power-generation plant operator training. The following are its salient characteristics: - Installed in work stations with multimedia capabilities a user-friendly interface - Covers various types of instruction on theory, procedure and maintenance allowing the execution of trainee-customized courses. - Includes all the phases of the teaching-learning task: compilation or creation and adaptation of course design information, execution and evaluation. - Combines the capabilities of traditional teaching tools, focusing basically on theoretical training, with the power of necessary real-time simulators for the assimilation of operation and maintenance procedures. Moreover, it provides the capacity to extract information instantly from the simulated system, without existing the simulation process. - It is run on inexpensive platforms (work stations) as compared to the traditional system of simulator training or training at site. (Author)

Channel Estimation and Optimal Training Design for Correlated MIMO Two-Way Relay Systems in Colored Environment

OpenAIRE

Wang, Rui; Tao, Meixia; Mehrpouyan, Hani; Hua, Yingbo

2014-01-01

In this paper, while considering the impact of antenna correlation and the interference from neighboring users, we analyze channel estimation and training sequence design for multi-input multi-output (MIMO) two-way relay (TWR) systems. To this end, we propose to decompose the bidirectional transmission links into two phases, i.e., the multiple access (MAC) phase and the broadcasting (BC) phase. By considering the Kronecker-structured channel model, we derive the optimal linear minimum mean-sq...

PROJECT AND ACTON STAGE OD DESIGNING FUTURE MUSIC TEACHERS’ ETHNOCULTURAL TRAINING

Directory of Open Access Journals (Sweden)

Xu Jiayu

2017-04-01

Full Text Available In the article the issue of developing future music teachers’ ethnocultural training in the process of their professional training is revealed. The author emphasizes on the relevance of the issue as future music teachers’ ethnocultural training contributes to, on the one hand, completing mastering the national system of cultural values of native people by students of higher musical educational institutions and, on the other hand, involving perception and understanding of other nations’ cultural values, allowing future music teachers to transmit values expressed by the young generation to their professional activity. It is reported that the main feature of future music teachers’ ethnocultural training is a system of ethnic and cultural values which is the background of musical and psychological-pedagogical and art training; it is actively engaged as value tools musical folk art and national art. Value methods that are involved in the process of training are methods of traditional pedagogy, as well as the basis of pedagogical communication – people’s ethics. It is noted that developing future music teachers’ ethnocultural training requires designing the special methodology. The constant items of this methodology are thought to be the forms, methods, techniques and means of pedagogical and ethnopedagogical impacts as tools for developing students’ ethnopedagogical thinking in the process of musical and pedagogical activities; the system of controlling future music teachers’ ethnopedagogical, ethnological, ethnomusical knowledge and skills as a combination of methods that enables an opportunity to compare the level of mastering the knowledge and skills at different stages of educational process; to organize tuition using innovative technologies. The special attention is paid to professional and active component of this methodology. The diagnostic tests according to the criterion of “a degree of professional effectiveness in

Physical protection design and analysis training for the former Soviet Union

International Nuclear Information System (INIS)

Soo Hoo, M.S.; Chapek, J.F.; Ebel, P.E.

1996-01-01

Since 1978, Sandia National Laboratories has provided training courses in the systematic design of Physical Protection Systems (PPS). One such course, the International Training Course (TC) on the Physical Protection of Nuclear Facilities and Materials, is sponsored by the Department of Energy's International Safeguards Division , the International Atomic Energy Agency, and the Department of State. Since 1978, twelve 3- and 4-week classes have been conducted by Sandia for these sponsors. One- and two-week adaptations of this course have been developed for other customers, and, since 1994, nine of these abbreviated courses have been presented in the Russian language to participants from the Former Soviet Union (SU). These courses have been performed in support of the Department of Energy's program on Material Protection, Control and Accounting (MPC ampersand A) for the Russian Federation and the Newly Independent States. MPC ampersand A physical protection training assumes participants have more narrowly defined backgrounds. In using affective approaches, the overall goal of training in the context of the MPC ampersand A Program is to develop modern and effective, indigenous capabilities for physical protection system design and analysis within the SU. This paper contrasts the cognitive and affective approaches to training and indicates why different approaches are required for the ITC and the MPC ampersand A Programs

Development of training system to prevent accidents during decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Jeong, Kwanseong; Moon, Jeikwon; Choi, Byungseon; Hyun, Dongjun; Lee, Jonghwan; Kim, Ikjune; Kim, Geunho; Seo, Jaeseok

2014-01-01

Decommissioning workers need familiarization with working environments because working environment is under high radioactivity and work difficulty during decommissioning of nuclear facilities. On-the-job training of decommissioning works could effectively train decommissioning workers but this training approach could consume much costs and poor modifications of scenarios. The efficiency of virtual training system could be much better than that of physical training system. This paper was intended to develop the training system to prevent accidents for decommissioning of nuclear facilities. The requirements for the training system were drawn. The data management modules for the training system were designed. The training system of decommissioning workers was developed on the basis of virtual reality which is flexibly modified. The visualization and measurement in the training system were real-time done according as changes of the decommissioning scenario. It can be concluded that this training system enables the subject to improve his familiarization about working environments and to prevent accidents during decommissioning of nuclear facilities

Development of training system to prevent accidents during decommissioning of nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwanseong; Moon, Jeikwon; Choi, Byungseon; Hyun, Dongjun; Lee, Jonghwan; Kim, Ikjune; Kim, Geunho; Seo, Jaeseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Decommissioning workers need familiarization with working environments because working environment is under high radioactivity and work difficulty during decommissioning of nuclear facilities. On-the-job training of decommissioning works could effectively train decommissioning workers but this training approach could consume much costs and poor modifications of scenarios. The efficiency of virtual training system could be much better than that of physical training system. This paper was intended to develop the training system to prevent accidents for decommissioning of nuclear facilities. The requirements for the training system were drawn. The data management modules for the training system were designed. The training system of decommissioning workers was developed on the basis of virtual reality which is flexibly modified. The visualization and measurement in the training system were real-time done according as changes of the decommissioning scenario. It can be concluded that this training system enables the subject to improve his familiarization about working environments and to prevent accidents during decommissioning of nuclear facilities.

Design and Implementation study of Remote Home Rehabilitation Training Operating System based on Internet

Science.gov (United States)

Zhuo, Jin; Chung Gun, Jang

2018-03-01

The proportion of rehabilitation doctors and patients mismatch is very grim in the context of social aging. The Family Rehabilitation System captures the profound information of the trainer’s movements through the kinect bone tracing technique, allowing the doctor to remotely master the patient’s training progress. With the help of computers and the Internet, the patient can consult a physician, while the physician can remotely guide and launch the training “prescription” through the Internet according to the training effect. Patients can have rehabilitated training at home. The results of the test showed that the system has a positive effect on the rehabilitation of the patient.

Design and preliminary evaluation of an exoskeleton for upper limb resistance training

Science.gov (United States)

Wu, Tzong-Ming; Chen, Dar-Zen

2012-06-01

Resistance training is a popular form of exercise recommended by national health organizations, such as the American College of Sports Medicine (ACSM) and the American Heart Association (AHA). This form of training is available for most populations. A compact design of upper limb exoskeleton mechanism for homebased resistance training using a spring-loaded upper limb exoskeleton with a three degree-of-freedom shoulder joint and a one degree-of-freedom elbow joint allows a patient or a healthy individual to move the upper limb with multiple joints in different planes. It can continuously increase the resistance by adjusting the spring length to train additional muscle groups and reduce the number of potential injuries to upper limb joints caused by the mass moment of inertia of the training equipment. The aim of this research is to perform a preliminary evaluation of the designed function by adopting an appropriate motion analysis system and experimental design to verify our prototype of the exoskeleton and determine the optimal configuration of the spring-loaded upper limb exoskeleton.

Training programs for the systems approach to nuclear security

International Nuclear Information System (INIS)

Ellis, D.

2005-01-01

Full text: In support of United States Government (USG) and International Atomic Energy Agency (IAEA) nuclear security programs, Sandia National Laboratories (SNL) has advocated and practiced a risk-based, systematic approach to nuclear security. The risk equation has been developed and implemented as the basis for a performance-based methodology for the design and evaluation of physical protection systems against a design basis threat (DBT) for theft and sabotage of nuclear and/or radiological materials. Integrated systems must include technology, people, and the man-machine interface. A critical aspect of the human element is training on the systems-approach for all the stakeholders in nuclear security. Current training courses and workshops have been very beneficial but are still rather limited in scope. SNL has developed two primary international classes - the international training course on the physical protection of nuclear facilities and materials, and the design basis threat methodology workshop. SNL is also completing the development of three new courses that will be offered and presented in the near term. They are vital area identification methodology focused on nuclear power plants to aid in their protection against radiological sabotage, insider threat analysis methodology and protection schemes, and security foundations for competent authority and facility operator stakeholders who are not security professionals. In the long term, we envision a comprehensive nuclear security curriculum that spans policy and technology, regulators and operators, introductory and expert levels, classroom and laboratory/field, and local and offsite training options. This training curriculum will be developed in concert with a nuclear security series of guidance documents that is expected to be forthcoming from the IAEA. It is important to note that while appropriate implementation of systems based on such training and documentation can improve the risk reduction, such a

Nuclear power plant personnel training process management system

International Nuclear Information System (INIS)

Arjona Vazquez, Orison; Venegas Bernal, Maria del Carmen; Armeteros Lopez, Ana L.

1996-01-01

The system in charge the management of the training process personnel from a nuclear power plant was designed taking into account all the requirements stated in the training guide for nuclear power plant personnel and their evaluation, which were prepared by the IAEA in 1995 in order to implement the SAT in the training programs for nuclear plant personnel. In the preparations of formats and elements that shape the system, account has been taken of the views expressed in such a guide, in some other bibliography that was consulted, and in the authors own opinion mainly with regard to those issues which the guide does not go deeper into

Integrated training support system for PWR operator training simulator

International Nuclear Information System (INIS)

Sakaguchi, Junichi; Komatsu, Yasuki

1999-01-01

The importance of operator training using operator training simulator has been recognized intensively. Since 1986, we have been developing and providing many PWR simulators in Japan. We also have developed some training support systems connected with the simulator and the integrated training support system to improve training effect and to reduce instructor's workload. This paper describes the concept and the effect of the integrated training support system and of the following sub-systems. We have PES (Performance Enhancement System) that evaluates training performance automatically by analyzing many plant parameters and operation data. It can reduce the deviation of training performance evaluation between instructors. PEL (Parameter and Event data Logging system), that is the subset of PES, has some data-logging functions. And we also have TPES (Team Performance Enhancement System) that is used aiming to improve trainees' ability for communication between operators. Trainee can have conversation with virtual trainees that TPES plays automatically. After that, TPES automatically display some advice to be improved. RVD (Reactor coolant system Visual Display) displays the distributed hydraulic-thermal condition of the reactor coolant system in real-time graphically. It can make trainees understand the inside plant condition in more detail. These sub-systems have been used in a training center and have contributed the improvement of operator training and have gained in popularity. (author)

Design and manufacturing of mechanical steering system for ...

African Journals Online (AJOL)

Design and manufacturing of mechanical steering system for parallel parking, zero turning radius, minimum turning radius with traditional turning. ... of the steering system are designed so as to meet all the configuration of steering system and to be well-matched to the power train, suspension system and body of the car.

Performance/Design Requirements and Detailed Technical Description for a Computer-Directed Training Subsystem for Integration into the Air Force Phase II Base Level System.

Science.gov (United States)

Butler, A. K.; And Others

The performance/design requirements and a detailed technical description for a Computer-Directed Training Subsystem to be integrated into the Air Force Phase II Base Level System are described. The subsystem may be used for computer-assisted lesson construction and has presentation capability for on-the-job training for data automation, staff, and…

The E-learning system used in the civil servants' job-training

Science.gov (United States)

Yang, Rui; Ruan, Jianhai

The Chinese government is pursuing e-learning policies which makes job-training with a knowledge-based society. To explain more fully the important role of the e-learning environment, this article undertakes some typical examples of the governments' job-training under e-learning environment. The main problems in servants' job-training in China are the low quantity in the servants' training, short of restriction, the uniform manner in the training and less fairness and availability of opportunities for educational training. In order to develop the e-learning system, the civil servant's job-training policies are provided and the measures of the effective e-learning system are designed.

Teaching Computer System-DMT DESIGN(SA.1

Directory of Open Access Journals (Sweden)

A. O. Shteynberg

2012-01-01

Full Text Available Тhe paper introduces the training computer system of sub- agential type based on a didactic multidimensional technology. The methodology bases incorporate the systematic activity approach, some elements of artificial intelligence theory, and the instrumental didactic theory and technology developed by Scientific Experimental Laboratory at Bashkirsky State Pedagogical University. The above training system – Didactic Multidimensional Technology Design of Sub-Agential Type (DMT_DESIGN (SA.1 – has been developed for raising teachers’ technological competence and creativity regarding both the general and vocational education. Its training structure is specified by invariant socio-cultural and anthropological bases; logically semantic modeling of course materials is provided. The research data can be used by people, engaged in developing educational information technologies; practicing teachers; and post-graduates conducting research and implementing the findings. 

Application and Design Characteristics of Generalized Training Devices.

Science.gov (United States)

Parker, Edward L.

This program identified applications and developed design characteristics for generalized training devices. The first of three sequential phases reviewed in detail new developments in Naval equipment technology that influence the design of maintenance training devices: solid-state circuitry, modularization, digital technology, standardization,…

Designing train-speed trajectory with energy efficiency and service quality

Science.gov (United States)

Jia, Jiannan; Yang, Kai; Yang, Lixing; Gao, Yuan; Li, Shukai

2018-05-01

With the development of automatic train operations, optimal trajectory design is significant to the performance of train operations in railway transportation systems. Considering energy efficiency and service quality, this article formulates a bi-objective train-speed trajectory optimization model to minimize simultaneously the energy consumption and travel time in an inter-station section. This article is distinct from previous studies in that more sophisticated train driving strategies characterized by the acceleration/deceleration gear, the cruising speed, and the speed-shift site are specifically considered. For obtaining an optimal train-speed trajectory which has equal satisfactory degree on both objectives, a fuzzy linear programming approach is applied to reformulate the objectives. In addition, a genetic algorithm is developed to solve the proposed train-speed trajectory optimization problem. Finally, a series of numerical experiments based on a real-world instance of Beijing-Tianjin Intercity Railway are implemented to illustrate the practicability of the proposed model as well as the effectiveness of the solution methodology.

Multi-dimensional design window search system using neural networks in reactor core design

International Nuclear Information System (INIS)

Kugo, Teruhiko; Nakagawa, Masayuki

2000-02-01

In the reactor core design, many parametric survey calculations should be carried out to decide an optimal set of basic design parameter values. They consume a large amount of computation time and labor in the conventional way. To support directly design work, we investigate a procedure to search efficiently a design window, which is defined as feasible design parameter ranges satisfying design criteria and requirements, in a multi-dimensional space composed of several basic design parameters. We apply the present method to the neutronics and thermal hydraulics fields and develop the multi-dimensional design window search system using it. The principle of the present method is to construct the multilayer neural network to simulate quickly a response of an analysis code through a training process, and to reduce computation time using the neural network without parametric study using analysis codes. The system works on an engineering workstation (EWS) with efficient man-machine interface for pre- and post-processing. This report describes the principle of the present method, the structure of the system, the guidance of the usages of the system, the guideline for the efficient training of neural networks, the instructions of the input data for analysis calculation and so on. (author)

A Cage-Based Training System for Non-Human Primates

Directory of Open Access Journals (Sweden)

Michaela D Curry

2017-07-01

Full Text Available Non-human primates (NHPs are widely-used experimental models in neurophysiological studies. Training on cognitive tasks prior to collecting neurophysiological data is an inseparable part of much of the research conducted using NHPs. Any improvement in the training method that reduces stress to the animal, increases the speed of training or improves performance on the task is of great potential value. We have designed, built and successfully utilized a fully portable cage-mountable system to train rhesus monkeys (Macaca mulatta. The flexibility and portability of both the animal interface and the control unit of this system would allow it to be used for a large variety of behavioral paradigms. Aside from experimental use, our system could potentially be used as a source of animal enrichment. We present the behavioral data collected using this method to train a visual working memory and a change detection task. Utilizing the in-cage training system allows the animal greater control over when and how long it chooses to work, rather than imposing a training schedule based on the availability of the experimenter. Using this method the animal learned to perform both behavioral tasks in a short amount of time. In some cases the animal would use the training system without the need for any water restriction. In addition to allowing voluntary, self-paced engagement with the task, this method has the advantage of being less disruptive to the monkey's social interactions, and presumably eliminating some of the stress occasioned by relocating for chair training. Although this system has the potential to ease and expedite the behavioral training of NHPs on a variety of tasks, here we provide only a demonstration of our cage-based training system using one NHP.

PEDAGOGICAL PRINCIPLES OF THE DESIGN AND DEVELOPMENT OF EXPERT TRAINING SYSTEMS

Directory of Open Access Journals (Sweden)

Oleh Shevchuk

2016-05-01

Full Text Available The articles defines the system of pedagogical principles (centering on an individual, the priority of the pedagogical approach, educational appropriateness of the use of new information technologies; the freedom of choice of the cognitive trajectory; diversity; openness and development; professional orientation; "precedent", the emotional fulfillment of the environment; the distribution of educational material which has to lie on the basis of designingeducational techniques which are based on expert training systems. The gnosiological grounds for the mentioned system of principles are provided.

Proprioception rehabilitation training system for stroke patients using virtual reality technology.

Science.gov (United States)

Kim, Sun I; Song, In-Ho; Cho, Sangwoo; Kim, In Young; Ku, Jeonghun; Kang, Youn Joo; Jang, Dong Pyo

2013-01-01

We investigated a virtual reality (VR) proprioceptive rehabilitation system that could manipulate the visual feedback of upper-limb during training and could do training by relying on proprioception feedback only. Virtual environments were designed in order to switch visual feedback on/off during upper-limb training. Two types of VR training tasks were designed for evaluating the effect of the proprioception focused training compared to the training with visual feedback. In order to evaluate the developed proprioception feedback virtual environment system, we recruited ten stroke patients (age: 54.7± 7.83years, on set: 3.29± 3.83 years). All patients performed three times PFVE task in order to check the improvement of proprioception function just before training session, after one week training, and after all training. In a comparison between FMS score and PFVE, the FMS score had a significant relationship with the error distance(r = -.662, n=10, p = .037) and total movement distance(r = -.726, n=10, p = .018) in PFVE. Comparing the training effect between in virtual environment with visual feedback and with proprioception, the click count, error distance and total error distance was more reduced in PFVE than VFVE. (Click count: p = 0.005, error distance: p = 0.001, total error distance: p = 0.007). It suggested that the proprioception feedback rather than visual feedback could be effective means to enhancing motor control during rehabilitation training. The developed VR system for rehabilitation has been verified in that stroke patients improved motor control after VR proprioception feedback training.

Design Guidelines for the Development of Virtual Reality and Augmented Reality Training Systems for Maintenance and Assembly Tasks

Directory of Open Access Journals (Sweden)

Tecchia Franco

2011-12-01

Full Text Available The current work describes design guidelines for the development of Virtual Reality (VR and Augmented Reality (AR platforms to train technicians on maintenance and assembly tasks of industrial machineries. The main skill involved in this kind of tasks is the procedural skill. Based on past literature and studies conducted within the SKILLS project, several main design guidelines were formulated. First, observational learning integrated properly within the training protocol increases training efficiency. Second, training protocols combining physical and cognitive fidelity enhances procedural skills acquisition. Third, guidance aids should be provided in a proper and controlled way. And last, enriched information about the task helps trainees to develop a useful mental model of the task. These recommendations were implemented in both VR and AR training platforms.

Design on the Control System of a Gait Rehabilitation Training Robot Based on Brain-Computer Interface and Virtual Reality Technology

Directory of Open Access Journals (Sweden)

Hui Wang

2012-10-01

Full Text Available In this paper a control system of a gait rehabilitation training robot based on Brain-Computer Interface (BCI and virtual reality technology is proposed, which makes the patients' rehabilitation training process more interesting. A technique for measuring the mental states of the human and associated applications based on normal brain signals are examined and evaluated firstly. Secondly, the virtual game starts with the information from the BCI and then it runs in the form of a thread, with the singleton design pattern as the main mode. Thirdly, through the synergistic cooperation with the main software, the virtual game can achieve quick and effective access to blood oxygen, heart rate and other physiological information of the patients. At the same time, by means of the hardware control system, the start-up of the gait rehabilitation training robot could be controlled accurately and effectively. Therefore, the plantar pressure information and the velocity information, together with the physiological information of the patients, would be properly reflected in the game lastly and the physical condition of the patients participating in rehabilitation training would also be reflected to a great extent.

Training programs for the systems approach to nuclear security

International Nuclear Information System (INIS)

Ellis, Doris E.

2005-01-01

In support of the US Government and the International Atomic Energy Agency (IAEA) Nuclear Security Programmes, Sandia National Laboratories (SNL) has advocated and practiced a risk-based, systematic approach to nuclear security. The risk equation has been implemented as the basis for a performance methodology for the design and evaluation of Physical Protection Systems against a Design Basis Threat (DBT) for theft or sabotage of nuclear and/or radiological materials. Since integrated systems must include people as well as technology and the man-machine interface, a critical aspect of the human element is to train all stakeholders in nuclear security on the systems approach. Current training courses have been beneficial but are still limited in scope. SNL has developed two primary international courses and is completing development of three new courses that will be offered and presented in the near term. In the long-term, SNL envisions establishing a comprehensive nuclear security training curriculum that will be developed along with a series of forthcoming IAEA Nuclear Security Series guidance documents.

Development of a totally integrated severe accident training system

International Nuclear Information System (INIS)

Kim, Ko Ryu; Park, Sun Hee; Choi, Young; Kim, Dong Ha

2006-01-01

Recently KAERI has developed the severe accident management guidance to establish the Korea standard severe accident management system. On the other hand the PC-based severe accident training simulator SATS has been developed, which uses the MELCOR code as the simulation engine. The simulator SATS graphically displays and simulates the severe accidents with interactive user commands. Especially the control capability of SATS could make a severe accident training course more interesting and effective. In this paper we will describe the development and functions of the electrical guidance module, HyperKAMG, and the SATS-HyperKAMG linkage system designed for a totally integrated and automated severe accident training. (author)

MiRTE: Mixed Reality Triage and Evacuation game for Mass Casualty information systems design, testing and training.

Science.gov (United States)

Yu, Xunyi; Ganz, Aura

2011-01-01

In this paper we introduce a Mixed Reality Triage and Evacuation game, MiRTE, that is used in the development, testing and training of Mass Casualty Incident (MCI) information systems for first responders. Using the Source game engine from Valve software, MiRTE creates immersive virtual environments to simulate various incident scenarios, and enables interactions between multiple players/first responders. What distinguishes it from a pure computer simulation game is that it can interface with external mass casualty incident management systems, such as DIORAMA. The game will enable system developers to specify technical requirements of underlying technology, and test different alternatives of design. After the information system hardware and software are completed, the game can simulate various algorithms such as localization technologies, and interface with an actual user interface on PCs and Smartphones. We implemented and tested the game with the DIORAMA system.

How to manage training: a guide to design and delivery for high performance

National Research Council Canada - National Science Library

Nilson, Carolyn D

2003-01-01

... Training 312 Chapter 12 How to Evaluate Training 346 Appendix: Models for Individual and Organizational Learning 385 Bibliography 413 Index 419 About the Author 425 v List of FiguresList of Figures Figure 3.1. ISD instructional system design. 80 Figure 3.2. ASTD human performance improvement process model. 81 Figure 3.3. Performance technology m...

New Train Run Monitoring system: Getting the most out of an ERTMS level 2 Signalling system

DEFF Research Database (Denmark)

Richter, Troels; Landex, Alex; Andersen, Jonas Lohmann Elkjær

. Rail Net Denmark is currently implementing ERTMS Level 2 signalling systems on the entire long distance network and a CBTC signalling system on the Copenhagen Suburban network. It is unlikely, that the current RDS will be able to function in this environment and especially be capable of taking...... advantage of the additional data delivered by the new systems. The conceptual design of a new RDS has consequently been underway since the start of the signalling program. The vision is to create an automatic system that delivers “perfect train run histories” with a cause for every time loss. The future...... ERTMS Traffic Management System will include a rescheduler: Every time a train leaves its path, a rescheduling is triggered and the train receives a new timetable. As a part of this process, other trains may also be rescheduled. A concept for converting this information into the “perfect train run...

The ALICE analysis train system

CERN Document Server

Zimmermann, Markus

2015-01-01

In the ALICE experiment hundreds of users are analyzing big datasets on a Grid system. High throughput and short turn-around times are achieved by a centralized system called the LEGO trains. This system combines analysis from different users in so-called analysis trains which are then executed within the same Grid jobs thereby reducing the number of times the data needs to be read from the storage systems. The centralized trains improve the performance, the usability for users and the bookkeeping in comparison to single user analysis. The train system builds upon the already existing ALICE tools, i.e. the analysis framework as well as the Grid submission and monitoring infrastructure. The entry point to the train system is a web interface which is used to configure the analysis and the desired datasets as well as to test and submit the train. Several measures have been implemented to reduce the time a train needs to finish and to increase the CPU efficiency.

An Affordable Microsurgical Training System for a Beginning Neurosurgeon: How to Realize the Self-Training Laboratory.

Science.gov (United States)

Chung, Sang-Bong; Ryu, Jiwook; Chung, Yeongu; Lee, Sung Ho; Choi, Seok Keun

2017-09-01

To provide detailed information about how to realize a self-training laboratory with cost-effective microsurgical instruments, especially pertinent for the novice trainee. Our training model is designed to allow the practice of the microsurgery skills in an efficient and cost-effective manner. A used stereoscopic microscope is prepared for microsurgical training. A sufficient working distance for microsurgical practice is obtained by attaching an auxiliary objective lens. The minimum instrument list includes 2 jeweler's forceps, iris scissors, and alligator clips. The iris scissors and alligator clip provide good alternatives to micro-scissors and microvascular clamp. The short time needed to set up the microscope and suture the gauze with micro-forceps makes the training model suitable for daily practice. It takes about 15 minutes to suture 10 neighboring fibers of the gauze with 10-0 nylon; thus, training can be completed more quickly. We have developed an inexpensive and efficient micro-anastomosis training system using a stereoscopic microscope and minimal micro-instruments. Especially useful for novice trainees, this system provides high accessibility for microsurgical training. Copyright © 2017 Elsevier Inc. All rights reserved.

Education and training support system

International Nuclear Information System (INIS)

Kubota, Rhuji; Iyadomi, Motomi.

1996-01-01

In order to train the specialist such as operator or maintenance stuff of large scale plant such as nuclear power plant or thermal power plant, a high grade teaching and training support system is required as well as in training pilot of aeroplane. The specialist in such large scale plant is also a researcher in the field of machinery, electricity and physics at first, and is grown up a expert operator or maintenance stuff through learning of CAI system or OTJ used training material for teaching tool in addition of training used operating or maintenance training device imitating actual plant after acquiring determined knowledges by receiving fundamental education on nuclear and thermal power plants. In this paper, the teaching and training support systems of the nuclear and thermal power plants for a system supporting such teaching and training, respectively, were introduced. (G.K.)

Design considerations for a servo optical projection system

Science.gov (United States)

Nadalsky, Michael; Allen, Daniel; Bien, Joseph

1987-01-01

The present servooptical projection system (SOPS) furnishes 'out-the-window' scenery for a pilot-training flight simulator; attention is given to the parametric tradeoffs made in the SOPS' optical design, as well as to its mechanical packaging and the servonetwork performance of the unit as integrated into a research/training helicopter flight simulator. The final SOPS configuration is a function of scan head design, assembly modularity, image deterioration method, and focal lengths and relative apertures.

Design of smartphone evidence awareness (SEAWARE) training

CSIR Research Space (South Africa)

Dlamini, Zama I

2016-01-01

Full Text Available be good sources of digital evidence, which might be inadmissible in a court of law if it is not handled properly. This paper presents the design of the smartphone evidence awareness (SEAware) training program for smartphone users. This training program... aware that their devices could be good sources of digital evidence, which might be inadmissible in a court of law if it is not handled properly Objective - To test smartphone evidence awareness skills before and after the training - To train a...

Automobile Starting and Lighting System Maintenance Training ...

African Journals Online (AJOL)

The purpose of this study is to develop automobile starting and lighting system maintenance training manual for technical college students. Research and Development (R and D) design was adopted for the study. The population of the study is 348, comprising of 76 auto-mechanics teachers, 36 automobile supervisors and ...

Guideways for high speed magnetically levitated train systems - TRANSRAPID

Energy Technology Data Exchange (ETDEWEB)

Falkner, H [Technische Univ. Braunschweig (Germany); Grossert, E [IBF Dr. Falkner GmbH, Braunschweig/Berlin (Germany)

1996-12-31

The superspeed maglev system Transrapid is a rapid train system designed for speeds ranging from 300 to 500 km/h, using new no-contact levitation, guidance and propulsion system technologies, which will soon be used for an actual operational line. On the Transrapid Test Facility in Emsland (TVE), suitibility studies have been carried out since 1984. In 1989, work began on the plans for a reference line. Different guideway constructions, designed for the actual operational line are discussed in the following article. (orig.)

Use of trunk stabilization and locomotor training in an adult with cerebellar ataxia: a single system design.

Science.gov (United States)

Freund, Jane E; Stetts, Deborah M

2010-10-01

The purpose of this study is to describe the effects of trunk stabilization training and locomotor training (LT) using body-weight support on a treadmill (BWST) and overground walking on balance, gait, self-reported function, and trunk muscle performance in an adult with severe ataxia secondary to brain injury. There are no studies on the effectiveness of these combined interventions in persons with ataxia. The subject was a 23-year-old male who had a traumatic brain injury 13 months prior. An A-B-A withdrawal single-system design was used. Outcome measures were Berg Balance Test (BBT), timed unsupported stance, Functional Ambulation Category (FAC), 10-meter walk test (10-MWT), Outpatient Physical Therapy Improvement in Movement Assessment Log (OPTIMAL), transverse abdominis (TrA) thickness, and isometric trunk endurance tests. Performance on the BBT, timed unsupported stance, FAC, 10-MWT, and OPTIMAL each improved after 10 weeks of intervention. In additions, TrA symmetry at rest improved as did right side-bridge endurance time. LT, using BWST and overground walking, and trunk stabilization training may be effective in improving balance, gait, function, and trunk performance in individuals with severe ataxia. Further research with additional subjects is indicated.

A Designed Framework for Delivering Systems Thinking Skills to Small Business Managers

Directory of Open Access Journals (Sweden)

Daowei Sun

2014-06-01

Full Text Available Many small businesses suffer from inadequate management skills which can lead to poor business performance and unsustainable businesses. Research to date has focused on traditional skills such as communication, time management and people skills, yet critically many business managers have no systems thinking skills. This paper presents a framework targeted at delivering systems thinking skills to managers of small businesses utilizing some key characteristic of small business managers. The design is also based on a systems analysis and guided by both adult learning theory and teaching theory. The quality of a training framework depends on the quality of the content design and the right training delivery methods. The systems thinking skills training framework structured systems thinking knowledge into three modules in order to meet the needs of different levels of managers. The framework advocates blended training delivery methods and it also presents possible pitfalls based on training experiences. Additionally, the framework incorporates a continuous improvement process for ongoing systemic improvement.

The computer aided education and training system for accident management

International Nuclear Information System (INIS)

Yoneyama, Mitsuru; Masuda, Takahiro; Kubota, Ryuji; Fujiwara, Tadashi; Sakuma, Hitoshi

2000-01-01

Under severe accident conditions of a nuclear power plant, plant operators and technical support center (TSC) staffs will be under a amount of stress. Therefore, those individuals responsible for managing the plant should promote their understanding about the accident management and operations. Moreover, it is also important to train in ordinary times, so that they can carry out accident management operations effectively on severe accidents. Therefore, the education and training system which works on personal computers was developed by Japanese BWR group (Tokyo Electric Power Co.,Inc., Tohoku Electric Power Co. ,Inc., Chubu Electric Power Co. ,Inc., Hokuriku Electric Power Co.,Inc., Chugoku Electric Power Co.,Inc., Japan Atomic Power Co.,Inc.), and Hitachi, Ltd. The education and training system is composed of two systems. One is computer aided instruction (CAI) education system and the other is education and training system with a computer simulation. Both systems are designed to execute on MS-Windows(R) platform of personal computers. These systems provide plant operators and technical support center staffs with an effective education and training tool for accident management. TEPCO used the simulation system for the emergency exercise assuming the occurrence of hypothetical severe accident, and have performed an effective exercise in March, 2000. (author)

Corporate Sector Practice Informs Online Workforce Training for Australian Government Agencies: Towards Effective Educational-Learning Systems Design

Science.gov (United States)

McKay, Elspeth; Vilela, Cenie

2011-01-01

The purpose of this paper is to outline government online training practice. We searched individual research domains of the human-dimensions of Human Computer Interaction (HCI), information and communications technologies (ICT) and instructional design for evidence of either corporate sector or government training practices. We overlapped these…

Unattended Monitoring System Design Methodology

International Nuclear Information System (INIS)

Drayer, D.D.; DeLand, S.M.; Harmon, C.D.; Matter, J.C.; Martinez, R.L.; Smith, J.D.

1999-01-01

A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

A knowledge based system for training radiation emergency response personnel

International Nuclear Information System (INIS)

Kuriakose, K.K.; Peter, T.U.; Natarajan, A.

1992-01-01

One of the important aspects of radiation emergency preparedness is to impart training to emergency handling staff. Mock exercises are generally used for this purpose. But practical considerations limit the frequency of such exercises. A suitably designed computer software can be effectively used to impart training. With the advent of low cost personal computers, the frequency with which the training programme can be conducted is unlimited. A computer software with monotonic behaviour is inadequate for such training. It is necessary to provide human like tutoring capabilities. With the advances in knowledge based computer systems, it is possible to develop such a system. These systems have the capability of providing individualized training. This paper describes the development of such a system for training and evaluation of agencies associated with the management of radiation emergency. It also discusses the utility of the software as a general purpose tutor. The details required for the preparation of data files and knowledge base files are included. It uses a student model based on performance measures. The software is developed in C under MS-DOS. It uses a rule based expert system shell developed in C. The features of this shell are briefly described. (author). 5 refs

Modern trends in designing high-speed trains

Directory of Open Access Journals (Sweden)

Golubović Snežana D.

2015-01-01

Full Text Available Increased advantages of railway transportation systems over other types of transportation systems in the past sixty years have been a result of an intensive development of the new generations of high-speed trains. Not only do these types of trains comply with the need for increased speed of transportation and make the duration of the journey shorter, but they also meet the demands for increased reliability, safety and direct application of energy efficiency to the transportation system itself. Along with increased train speed, the motion resistance is increased as well, whereby at speeds over 200 km/h the proportion of air resistance becomes the most dominant member. One of the most efficient measures for reducing air resistance, as well as other negative consequences of high-speed motion, is the development of the aerodynamic shape of the train. This paper presents some construction solutions that affect the aerodynamic properties of high-speed trains, first and foremost, the nose shape, as well as the similarities and differences of individual subsystems necessary for the functioning of modern high-speed rail systems. We analysed two approaches to solving the problem of the aerodynamic shape of the train and the appropriate infrastructure using the examples of Japan and France. Two models of high-speed trains, Shinkansen (Japan and TGV, i.e. AGV (France, have been discussed.

Training Requirements and Training Delivery in the Total Army School System

National Research Council Canada - National Science Library

Winkler, John

1999-01-01

This report analyzes training requirements and school delivery of training in the Total Army School System, focusing on the system's ability to meet its training requirements in Reserve Component Training Institutions...

Improving Creativity Training: A Study of Designer Skills

DEFF Research Database (Denmark)

Valgeirsdóttir, Dagný; Onarheim, Balder; Li-Ying, Jason

2016-01-01

and Cross2001]. Establishing that creativity is important for design and innovation implies that identifying ways of improving creativity is a relevant research area within design studies. Creativity is a basic human skill and multiple studies have been published showing that creativity is a skill that can...... be directed at the individual level by enhancing individual creativity skills, but also improvement at the team level, rendering it important to first improve the understanding of both these levels of creativity in the design process.There are multiple ways to train creativity, although currently most...... optimal way of training creativity is through a combination of (1) educating individuals about creativity, thereby building a solid theoretical understanding, and (2) providing them with a real world case where they are trained in the use of creative tools and processes[Scott et al. 2004]. The latter...

Superfund Hazard Ranking System Training Course: Table of Contents

Science.gov (United States)

The Hazard Ranking System (HRS) training course is a four and ½ day, intermediate-level course designed for personnel who are required to compile, draft, and review preliminary assessments (PAs), site inspections (SIs), and HRS documentation records/packag

Analysis of vulnerability to intrusion - a software for aid in training, design, and implementation of physical system

International Nuclear Information System (INIS)

Tangdan

2002-01-01

Full text: In this paper, we discuss briefly the developed level of physical protection system (PPS) in different Chinese history stage, and the relation between PPS and society, politics, military and security. It reveals the current status of application of PPS in China, and the level of design, implementation, evaluation and products. We also discuss the developing direction and applying tendency of PPS in future China. We mainly introduce a software using the ASD to evaluate the effectiveness of the PPS at a facility. It is used for training, design, and implementation of physical system. It identifies the path which adversaries can follow to accomplish sabotage or theft. For a specific PPS and threat, the most vulnerable path can be determined. The path probability of interruption P(I) establishes of the total PPS. Especially, we introduce how to specify threat characteristics bases the situation of present Chinese society, based global and local threat development. We also introduce how to build a data base of different elements based on the level of crime at present China. (author)

Automatically controlled training systems

International Nuclear Information System (INIS)

Milashenko, A.; Afanasiev, A.

1990-01-01

This paper reports that the computer system for NPP personnel training was developed for training centers in the Soviet Union. The system should be considered as the first step in training, taking into account that further steps are to be devoted to part-task and full scope simulator training. The training room consists of 8-12 IBM PC/AT personal computers combined into a network. A trainee accesses the system in a dialor manner. Software enables the instructor to determine the trainee's progress in different subjects of the program. The quality of any trainee preparedness may be evaluated by Knowledge Control operation. Simplified dynamic models are adopted for separate areas of the program. For example, the system of neutron flux monitoring has a dedicated model. Currently, training, requalification and support of professional qualifications of nuclear power plant operators is being emphasized. A significant number of emergency situations during work are occurring due to operator errors. Based on data from September-October 1989, more than half of all unplanned drops in power and stoppages of power plants were due to operator error. As a comparison, problems due to equipment malfunction accounted for no more than a third of the total. The role of personnel, especially of the operators, is significant during normal operations, since energy production costs as well as losses are influenced by the capability of the staff. These facts all point to the importance of quality training of personnel

The scenario-based system of workers training to prevent accidents during decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Jeong, KwanSeong; Choi, ByungSeon; Moon, JeiKwon; Hyun, DongJun; Lee, JongHwan; Kim, IkJune; Kim, GeunHo; Seo, JaeSeok

2014-01-01

Highlights: • This paper is meant to develop the training system to prevent accidents during decommissioning of nuclear facilities. • Requirements of the system were suggested. • Data management modules of the system were designed. • The system was developed on virtual reality environment. - Abstract: This paper is meant to develop the training system to prevent accidents during decommissioning of nuclear facilities. Requirements of the system were suggested. Data management modules of the system were designed. The system was developed on virtual reality environment. The performance test of the system was proved to be appropriate to decommissioning of nuclear facilities

An intention driven hand functions task training robotic system.

Science.gov (United States)

Tong, K Y; Ho, S K; Pang, P K; Hu, X L; Tam, W K; Fung, K L; Wei, X J; Chen, P N; Chen, M

2010-01-01

A novel design of a hand functions task training robotic system was developed for the stroke rehabilitation. It detects the intention of hand opening or hand closing from the stroke person using the electromyography (EMG) signals measured from the hemiplegic side. This training system consists of an embedded controller and a robotic hand module. Each hand robot has 5 individual finger assemblies capable to drive 2 degrees of freedom (DOFs) of each finger at the same time. Powered by the linear actuator, the finger assembly achieves 55 degree range of motion (ROM) at the metacarpophalangeal (MCP) joint and 65 degree range of motion (ROM) at the proximal interphalangeal (PIP) joint. Each finger assembly can also be adjusted to fit for different finger length. With this task training system, stroke subject can open and close their impaired hand using their own intention to carry out some of the daily living tasks.

Preliminary design package for solar heating and hot water system

Science.gov (United States)

1976-01-01

Two prototype solar heating and hot water systems for use in single-family dwellings or commercial buildings were designed. Subsystems included are: collector, storage, transport, hot water, auxiliary energy, and government-furnished site data acquisition. The systems are designed for Yosemite, California, and Pueblo, Colorado. The necessary information to evaluate the preliminary design for these solar heating and hot water systems is presented. Included are a proposed instrumentation plan, a training program, hazard analysis, preliminary design drawings, and other information about the design of the system.

Control room design and human factors using a virtual reality based tool for design, test and training

International Nuclear Information System (INIS)

Lirvall, Peter

1998-02-01

This report describes a user-centred approach to control room design adopted by IFE for the nuclear industry. The novelty of this approach is the development of a Control Room Philosophy, and the use of Virtual Reality (VR) technology as a tool in the design process, integrated with a specially developed Design Documentation System (DDS) and a process display prototyping tool PICASSO-3. The control room philosophy identifies all functional aspects of a control centre, to define the baseline principles and guidelines for the design. The use of VR technology enables end-users of the control room design (e.g. control room operators) to specify their preferred design of the new control room, and to replace the need for a physical mock-up to test and evaluate the proposed design. The DDS, integrated with the VR design tool, guides the control room operators, through a structured approach, to document the proposed design in a complete design specification. The VR tool, specially developed by IFE, is called the VR based Design, Test and Training tool (VR DTandT). It is not only intended to visualise the design, but also to test and evaluate the design. When the design is implemented, the same model is re-used as a VR based training simulator for operators. A special feature in the VR DTandT tool is that the verification and validation (VandV) tests, concerning human factors, are according to the regulative standards for nuclear control rooms

Evaluation of the user experience of "astronaut training device": an immersive, vr-based, motion-training system

Science.gov (United States)

Yue, Kang; Wang, Danli; Yang, Xinpan; Hu, Haichen; Liu, Yuqing; Zhu, Xiuqing

2016-10-01

To date, as the different application fields, most VR-based training systems have been different. Therefore, we should take the characteristics of application field into consideration and adopt different evaluation methods when evaluate the user experience of these training systems. In this paper, we propose a method to evaluate the user experience of virtual astronauts training system. Also, we design an experiment based on the proposed method. The proposed method takes learning performance as one of the evaluation dimensions, also combines with other evaluation dimensions such as: presence, immersion, pleasure, satisfaction and fatigue to evaluation user experience of the System. We collect subjective and objective data, the subjective data are mainly from questionnaire designed based on the evaluation dimensions and user interview conducted before and after the experiment. While the objective data are consisted of Electrocardiogram (ECG), reaction time, numbers of reaction error and the video data recorded during the experiment. For the analysis of data, we calculate the integrated score of each evaluation dimension by using factor analysis. In order to improve the credibility of the assessment, we use the ECG signal and reaction test data before and after experiment to validate the changes of fatigue during the experiment, and the typical behavioral features extracted from the experiment video to explain the result of subjective questionnaire. Experimental results show that the System has a better user experience and learning performance, but slight visual fatigue exists after experiment.

Analysis and Design of the Innovation and Entrepreneurship Training Management System based on School Enterprise Cooperation (Taking the School of Computer and Information Engineering of Beijing University of Agriculture as an example)

Science.gov (United States)

Qianyi, Zhang; Xiaoshun, Li; Ping, Hu; Lu, Ning

2018-03-01

With the promotion of undergraduate training mode of “3+1” in Beijing University of Agriculture, the mode and direction of applied and compound talents training should be further visualized, at the same time, in order to make up for the shortage of Double Teachers in the school and the lack of teaching cases that cover the advanced technology in the industry, the school actively encourages the cooperation between the two teaching units and enterprises, and closely connects the enterprise resources with the school teaching system, using the “1” in “3+1” to carry out innovative training work for students. This method is beneficial for college students to integrate theory into practice and realize the purpose of applying knowledge in Higher Education. However, in the actual student training management, this kind of cooperation involves three party units and personnel, so it is difficult to form a unified management, on the other hand, it may also result from poor communication, which leads to unsatisfactory training results. At the same time, there is no good training supervision mechanism, causes the student training work specious. To solve the above problem,this paper designs a training management system of student innovation and Entrepreneurship Based on school enterprise cooperation,the system can effectively manage the relevant work of students’ training, and effectively solve the above problems. The subject is based on the training of innovation and entrepreneurship in the school of computer and information engineering of Beijing University of Agriculture. The system software architecture is designed using B/S architecture technology, the system is divided into three layers, the application of logic layer includes student training management related business, and realized the user’s basic operation management for student training, users can not only realize the basic information management of enterprises, colleges and students through the system

Basis scheme of personnel training system

International Nuclear Information System (INIS)

Rerucha, F.; Odehnal, J.

1998-01-01

Basic scheme of the training system for NPP personnel of CEZ-EDU personnel training system is described in detail. This includes: specific training both basic and periodic, and professional training meaning specialized and continuous training. The following schemes are shown: licence acquisition and authorisation for PWR-440 Control Room Personnel; upgrade training for job positions of Control Room personnel; maintaining and refresh training; module training for certificate acquisition of servicing shift and operating personnel

The use of high fidelity CAD models as the basis for training on complex systems

Science.gov (United States)

Miller, Kellie; Tanner, Steve

1993-01-01

During the design phases of large and complex systems such as NASA's Space Station Freedom (SSF), there are few, if any physical prototypes built. This is often due to their expense and the realization that the design is likely to change. This poses a problem for training, maintainability, and operations groups who are tasked to lay the foundation of plans for using these systems. The Virtual Reality and Visualization Laboratory at the Boeing Advanced Computing Group's Huntsville facility is supporting the use of high fidelity, detailed design models that are generated during the initial design phases, for use in training, maintainability and operations exercises. This capability was used in its non-immersive form to great effect at the SSF Critical Design Review (CDR) during February, 1993. Allowing the user to move about within a CAD design supports many efforts, including training and scenario study. We will demonstrate via a video of the Maintainability SSF CDR how this type of approach can be used and why it is so effective in conveying large amounts of information quickly and concisely. We will also demonstrate why high fidelity models are so important for this type of training system and how it's immersive aspects may be exploited as well.

Fire Extinguisher Training for Fire Watch and Designated Workers, Course 9893

Energy Technology Data Exchange (ETDEWEB)

Harris, Jimmy D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-04-19

At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code of Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.

Designing Train Passenger Seat by Kansei Engineering in Indonesia

Directory of Open Access Journals (Sweden)

Hapsari Sakya Nabila

2017-01-01

Full Text Available Public transport adoption is still major problem in Indonesia. Integrating impression and emotion to service may change the image of public transport, leading to fast adoption rate. As product development technique, Kansei Engineering is well known to facilitate that integration. This paper communicates the implementation of Kansei Engineering (KE in designing train passenger seat in Indonesia. The train between Bandung-Solo (8 hours journey was chosen to be the investigated object. The train was selected to be refurbished by introducing a new passenger seat design, emphasizing on the improvement of passenger experience. As the first step of KE type I technique, travel experience of the existing passengers were taken into the consideration for selecting Kansei words. It was found that the relevant Kansei words to design passenger train seat in Indonesia were: comfort, people-friendly, multifunction, safe, soft, spacious, relaxing, superior, maintainable, strong, producible, minimalist, attractive, modern, unique, and durable. Upon understanding the semantic meaning of those words, physical properties and technical specification were produced by consulting to the related members. Finally, a passenger seat with synthetic leather cover, modular design, foldable table, individual power point, bluesilver color, and adjusted to Indonesian’s anthropometry data was proposed as the final design

System for the quality assurance of personnel training programs

International Nuclear Information System (INIS)

Rjona, Orison; Venegas, Maria del C.; Rodriguez, Lazaro; Lopez, Miguel A.; Armenteros, Ana L.

1999-01-01

In this work are described the fundamental possibilities and characteristics of a software that allows to carry out the management and automatic evaluation of all data gotten during jobs analysis and design, development, implementation and evaluation of personnel training programs of nuclear and radioactive installations and risk industries. The system that is introduced, GESAT, proportion a tool of centralized managerial control of training data and the obtaining of the quality objectives of each installation in the training of their personnel. GESAT includes all phases of SAT method (Systematic Approach to Training). It constitutes the necessary practical support for the elaboration, implementation and evaluation of training programs, allowing the establishment of restrictions and controls and avoiding inconsistencies in the process. It offers the possibility of automatic evaluation that identify fundamental deficiencies in the planning and implementation of training programs. This evaluation facilitates the systematic feed back and the continuous improvement of the training programs.(author)

Designs for the Evaluation of Teacher Training Materials. Report No. 2.

Science.gov (United States)

Okey, James R.; Ciesla, Jerome L.

This paper describes methods to assess the impact on students of a teacher using skills learned in a training program. Three designs for assessing the effects of teacher training materials are presented: time series design, equivalent time-samples design, and posttest-only control group design. Data obtained by classroom teachers while using the…

A blended design in acute care training: similar learning results, less training costs compared with a traditional format.

Science.gov (United States)

Dankbaar, Mary E W; Storm, Diana J; Teeuwen, Irene C; Schuit, Stephanie C E

2014-09-01

Introduction There is a demand for more attractive and efficient training programmes in postgraduate health care training. This retrospective study aims to show the effectiveness of a blended versus traditional face-to-face training design. For nurses in postgraduate Acute and Intensive Care training, the effectiveness of a blended course design was compared with a traditional design. Methods In a first pilot study 57 students took a traditional course (2-h lecture and 2-h workshop) and 46 students took a blended course (2-h lecture and 2-h online self-study material). Test results were compared for both groups. After positive results in the pilot study, the design was replicated for the complete programme in Acute and Intensive Care. Now 16 students followed the traditional programme (11 days face-to-face education) and 31 students did the blended programme (7 days face-to-face and 40 h online self-study). An evaluation was done after the pilot and course costs were calculated. Results Results show that the traditional and blended groups were similar regarding the main characteristics and did not differ in learning results for both the pilot and the complete programme. Student evaluations of both designs were positive; however, the blended group were more confident that they had achieved the learning objectives. Training costs were reduced substantially. Conclusion The blended training design offers an effective and attractive training solution, leading to a significant reduction in costs.

Business System Planning Project, Preliminary System Design

International Nuclear Information System (INIS)

EVOSEVICH, S.

2000-01-01

CH2M HILL Hanford Group, Inc. (CHG) is currently performing many core business functions including, but not limited to, work control, planning, scheduling, cost estimating, procurement, training, and human resources. Other core business functions are managed by or dependent on Project Hanford Management Contractors including, but not limited to, payroll, benefits and pension administration, inventory control, accounts payable, and records management. In addition, CHG has business relationships with its parent company CH2M HILL, U.S. Department of Energy, Office of River Protection and other River Protection Project contractors, government agencies, and vendors. The Business Systems Planning (BSP) Project, under the sponsorship of the CH2M HILL Hanford Group, Inc. Chief Information Officer (CIO), have recommended information system solutions that will support CHG business areas. The Preliminary System Design was developed using the recommendations from the Alternatives Analysis, RPP-6499, Rev 0 and will become the design base for any follow-on implementation projects. The Preliminary System Design will present a high-level system design, providing a high-level overview of the Commercial-Off-The-Shelf (COTS) modules and identify internal and external relationships. This document will not define data structures, user interface components (screens, reports, menus, etc.), business rules or processes. These in-depth activities will be accomplished at implementation planning time

Preliminary power train design for a state-of-the-art electric vehicle

Science.gov (United States)

Ross, J. A.; Wooldridge, G. A.

1978-01-01

The state-of-the-art (SOTA) of electric vehicles built since 1965 was reviewed to establish a base for the preliminary design of a power train for a SOTA electric vehicle. The performance of existing electric vehicles were evaluated to establish preliminary specifications for a power train design using state-of-the-art technology and commercially available components. Power train components were evaluated and selected using a computer simulation of the SAE J227a Schedule D driving cycle. Predicted range was determined for a number of motor and controller combinations in conjunction with the mechanical elements of power trains and a battery pack of sixteen lead-acid batteries - 471.7 kg at 0.093 MJ/Kg (1040 lbs. at 11.7 Whr/lb). On the basis of maximum range and overall system efficiency using the Schedule D cycle, an induction motor and 3 phase inverter/controller was selected as the optimum combination when used with a two-speed transaxle and steel belted radial tires. The predicted Schedule D range is 90.4 km (56.2 mi). Four near term improvements to the SOTA were identified, evaluated, and predicted to increase range approximately 7%.

Computer-enhanced laparoscopic training system (CELTS): bridging the gap.

Science.gov (United States)

Stylopoulos, N; Cotin, S; Maithel, S K; Ottensmeye, M; Jackson, P G; Bardsley, R S; Neumann, P F; Rattner, D W; Dawson, S L

2004-05-01

There is a large and growing gap between the need for better surgical training methodologies and the systems currently available for such training. In an effort to bridge this gap and overcome the disadvantages of the training simulators now in use, we developed the Computer-Enhanced Laparoscopic Training System (CELTS). CELTS is a computer-based system capable of tracking the motion of laparoscopic instruments and providing feedback about performance in real time. CELTS consists of a mechanical interface, a customizable set of tasks, and an Internet-based software interface. The special cognitive and psychomotor skills a laparoscopic surgeon should master were explicitly defined and transformed into quantitative metrics based on kinematics analysis theory. A single global standardized and task-independent scoring system utilizing a z-score statistic was developed. Validation exercises were performed. The scoring system clearly revealed a gap between experts and trainees, irrespective of the task performed; none of the trainees obtained a score above the threshold that distinguishes the two groups. Moreover, CELTS provided educational feedback by identifying the key factors that contributed to the overall score. Among the defined metrics, depth perception, smoothness of motion, instrument orientation, and the outcome of the task are major indicators of performance and key parameters that distinguish experts from trainees. Time and path length alone, which are the most commonly used metrics in currently available systems, are not considered good indicators of performance. CELTS is a novel and standardized skills trainer that combines the advantages of computer simulation with the features of the traditional and popular training boxes. CELTS can easily be used with a wide array of tasks and ensures comparability across different training conditions. This report further shows that a set of appropriate and clinically relevant performance metrics can be defined and a

Leadership training design, delivery, and implementation: A meta-analysis.

Science.gov (United States)

Lacerenza, Christina N; Reyes, Denise L; Marlow, Shannon L; Joseph, Dana L; Salas, Eduardo

2017-12-01

Recent estimates suggest that although a majority of funds in organizational training budgets tend to be allocated to leadership training (Ho, 2016; O'Leonard, 2014), only a small minority of organizations believe their leadership training programs are highly effective (Schwartz, Bersin, & Pelster, 2014), calling into question the effectiveness of current leadership development initiatives. To help address this issue, this meta-analysis estimates the extent to which leadership training is effective and identifies the conditions under which these programs are most effective. In doing so, we estimate the effectiveness of leadership training across four criteria (reactions, learning, transfer, and results; Kirkpatrick, 1959) using only employee data and we examine 15 moderators of training design and delivery to determine which elements are associated with the most effective leadership training interventions. Data from 335 independent samples suggest that leadership training is substantially more effective than previously thought, leading to improvements in reactions (δ = .63), learning (δ = .73), transfer (δ = .82), and results (δ = .72), the strength of these effects differs based on various design, delivery, and implementation characteristics. Moderator analyses support the use of needs analysis, feedback, multiple delivery methods (especially practice), spaced training sessions, a location that is on-site, and face-to-face delivery that is not self-administered. Results also suggest that the content of training, attendance policy, and duration influence the effectiveness of the training program. Practical implications for training development and theoretical implications for leadership and training literatures are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Managing the systems approach to training using a flexible Hierarchical data base

International Nuclear Information System (INIS)

Housman, E.; Bush, E.R.

1993-01-01

Task analysis/curriculum design for a nuclear power station results in a massive amount of data, which must be sequenced and ordered to create an effective program design. This is an almost impossible task without the use of computerized data base. Beginning in 1989, San Onofre nuclear generating station (SONGS) undertook a task analysis/program design project to verify the structure and sequence (design) of all accredited training program. A flex hierarchical data-base management system was designed to store and manage the data collected during the project. For the Operations Training Programm alone ∼8000 tasks, 90,000 knowledges and abilities, and 10,000 learning objectives were entered into this data base

SARIE upgrade: Nuclear reactor and water systems 'engineering and training' simulator

International Nuclear Information System (INIS)

Roth, P.

2006-01-01

Confronted as of its origins with the on-board layout constraints of the French Navy ships, TECHNICATOME integrates, as of the design, the ergonomics and the risks control related to the human factors. During more than 30 years, TECHNICATOME demonstrated a one of a kind know-how from the design to the execution of powerful, flexible and highly available nuclear compact reactors. A total control which includes up to the supervision and monitoring systems, the acoustic discreetly of the systems and its components, implemented on on-board reactors, testing reactors as well as experimental reactors. The functionalities of simulation were right from the start used by TECHNICATOME during the design phase of these installations to carry out operation engineering analyses on the thermal hydraulic and neutron aspects, to validate the principles of operation of the supervision systems like by the use of digital models in 3D CAD to validate the kinematics of operation or the interactions between systems. More recently, and starting from the end of the Nineties, a thought needs was launched to determine the interests related to the development of a training simulator associated with these installations with objectives, among others, to ensure the phase of initial training of the new operators, to widen the field of the training to the accidental situations, the management of crisis and crews behaviour supervision, the possibilities of replay which support the consolidation of the acquired knowledge(debriefing) with situation resume, and to increase the overall training capacity. An upgrade and modernisation project of these various simulation means was thus launched since 2001 with the objective to optimize the whole of the tasks supported by these means. (author)

The Development and Evaluation of a Multimedia Resource To Support ICT Training: Design Issues, Training Processes and User Experiences.

Science.gov (United States)

Tearle, Penni; Dillon, Patrick

2001-01-01

Addresses issues surrounding the process of information and communications technology training (ICT), and the application of training outcomes in the workplace. Provides an overview of content and design features of the multimedia resource "Ensuring Effectiveness of ICT Training" and reports on its evaluation. Discusses design issues, training…

Use of a dementia training designed for nurse aides to train other staff.

Science.gov (United States)

Irvine, A Blair; Beaty, Jeff A; Seeley, John R; Bourgeois, Michelle

2013-12-01

Problematic resident behaviors may escalate in long-term care facilities (LTCs). If nurse aides (NAs) are not nearby, the nearest staff to intervene may be non-direct care workers (NDCWs), who have little or no dementia training. This pilot research tested Internet dementia-training program, designed for NAs, on NDCWs in a LTC setting. Sixty-eight NDCWs participated, filling out two baseline surveys at 1-month intervals and a posttest survey after training. The surveys included video-situation testing, items addressing psychosocial constructs associated with behavior change, and measures training-acceptance. Paired t tests showed significant positive effects on measures of knowledge, attitudes, self-efficacy, and behavioral intentions, with small-moderate effect sizes. Nursing staff as well as non-health care workers showed improved scores, and the web-site training program was well received by all participants. These results suggest that Internet training may allow staff development coordinators to conserve limited resources by cross-training of different job categories with the same program.

Analysis of System Training Impact for Major Defense Acquisition Programs (MDAPs): Training Systems Acquisition

Science.gov (United States)

2012-07-01

Training Systems Acquisition IDA Document D-4648 Log: H 12-001032 July 2012 Approved for public release; distribution is unlimited...Background The Patriot system began because of the need to replace an aging and limited air defense system in the 1970s, the Nike -Hercules, and...simulation technology, embedded training and distributed learning (DoD Instruction 1322.26), and instrumentation systems that provide “anytime, anyplace

Linear Motor Motion Control Experiment System Design Based on LabVIEW

Directory of Open Access Journals (Sweden)

Cuixian He

2018-01-01

Full Text Available In order to meet the needs of experimental training of electrical information industry, a linear motor motion experiment system based on LabVIEW was developed. This system is based on the STM32F103ZET6 system processor controller, a state signal when the motor moves through the grating encoder feedback controller to form a closed loop, through the RS232 serial port communication with the host computer, the host computer is designed in the LabVIEW interactive environment monitoring software. Combined with the modular design concept proposed overall program, given the detailed hardware circuit, targeted for the software function design, to achieve man-machine interface. The system control of high accuracy, good stability, meet the training requirements for laboratory equipment, but also as a reference embodiment of the linear motor monitoring system.

Research of Tai-chi-chuan auxiliary training system based on Kinect

Directory of Open Access Journals (Sweden)

Zhihong XUE

2017-04-01

Full Text Available In order to promote the scientific standardization of Tai-chi-chuan teaching and training, a Tai-chi-chuan auxiliary training system based on Kinect motion capture technology and extraction of the angle feature and speed feature is proposed and designed. The dynamic time planning algorithm (DTW sampling corresponding frame is applied to replace the traditional method of sampling the key frame. The auxiliary training system consists of learning module, action acquisition module and action scoring module. Learning module with stan-dard action teaching video, to meet the requirements of students learning; action acquisition module uses Microsoft developed Kinect equipment to realize data acquisition of the spatial coordinates of the human skeleton in Tai-chi-chuan action, and through filtered noise reduction and the occlusion point data processing the skeleton data is saved. The scoring module constructs the test sequence based on the 16 angle features of eight key joint nodes and the instantaneous velocity characteristics of 20 joint nodes. By comparing with the standard sequence in real time, the original scoring rules is used to achieve the scoring function, which provides students with intuitive and reliable training recommendations, so as to improve the efficiency of learning. By increasing the number of sensors, further designing and optimizing data fusion and filtering algorithm, combining with Microsoft’s Kinect2.0 version, the system can also be applied to medical rehabilitation, physical training analysis and evaluation, virtual reality and human-computer interaction, etc.

Training Capability Data for Dismounted Soldier Training System

Science.gov (United States)

2015-06-01

Virtual Squad Training System ( VSTS ). Like some of its predecessors, VSTS included a combination of man-wearable, tethered, and desktop interfaces...Simulator Bayonet w/Omni Directional Treadmill TRAC-WSMR Soldier Station Soldier Visualization Station V-IMTS SVS2-DI, DAGGERS, ASWETS VSTS Dismounted...Simulation, VSTS – Virtual Squad Training System 4 and microphone. The VSMM utilizes radio frequency identification (RFID) tags and hand sensors to

Game Mechanics and Bodily Interactions: Designing Interactive Technologies for Sports Training

DEFF Research Database (Denmark)

Jensen, Mads Møller

and enjoyment. Thus, despite being two coexisting research areas, they do not extend or contribute to one another per se. However, bridging this gap by combining skill acquisition knowledge from sports training technologies with motivational game mechanics from bodily games holds great potential for designing...... and developing relevant and engaging training experiences. I term this combination interactive sports training games. This dissertation bridges this gap by exploring how to design and develop bodily interactions that leverage the quality and engagement of sports training by using game mechanics, but also how...... to identify and avoid the pitfalls and challenges that emerge in the process. It further explores how competition can be facilitated in bodily games and how it affects players. These explorations are done by designing, developing and evaluating innovative interactive sports training games. The results...

A virtual reality assessment and training system for unilateral neglect.

Science.gov (United States)

Kim, Kwanguk; Kim, Jaehun; Ku, Jeonghun; Kim, Deog Young; Chang, Won Hyek; Shin, Dong Ik; Lee, Jang Han; Kim, In Young; Kim, Sun I

2004-12-01

Patients with unilateral neglect have problems reporting, responding, or orienting to novel or meaningful stimuli that is presented to the side opposite to that of a brain lesion. This creates a serous problem in regards to daily living activities. However, the established methods for assessing and training of unilateral neglect patients have several deficits. Recently, virtual reality (VR) technologies have been used as an assessment and treatment tool for rehabilitation. Hence, this study designed a VR system to assess and train unilateral neglect patients. In addition, the suitability and feasibility of our VR system for unilateral neglect patients was verified.

QoS-Aware Resource Allocation for Network Virtualization in an Integrated Train Ground Communication System

Directory of Open Access Journals (Sweden)

Li Zhu

2018-01-01

Full Text Available Urban rail transit plays an increasingly important role in urbanization processes. Communications-Based Train Control (CBTC Systems, Passenger Information Systems (PIS, and Closed Circuit Television (CCTV are key applications of urban rail transit to ensure its normal operation. In existing urban rail transit systems, different applications are deployed with independent train ground communication systems. When the train ground communication systems are built repeatedly, limited wireless spectrum will be wasted, and the maintenance work will also become complicated. In this paper, we design a network virtualization based integrated train ground communication system, in which all the applications in urban rail transit can share the same physical infrastructure. In order to better satisfy the Quality of Service (QoS requirement of each application, this paper proposes a virtual resource allocation algorithm based on QoS guarantee, base station load balance, and application station fairness. Moreover, with the latest achievement of distributed convex optimization, we exploit a novel distributed optimization method based on alternating direction method of multipliers (ADMM to solve the virtual resource allocation problem. Extensive simulation results indicate that the QoS of the designed integrated train ground communication system can be improved significantly using the proposed algorithm.

Post accident training program design at Three Mile Island

International Nuclear Information System (INIS)

Lawyer, L.L.

1981-01-01

The TMI preaccident training staff typically consisted of 9 professional and 3 administrative support persons. Procedures were prepared and facilities designated for operator training. The thrust of the post accident effort was directed to expanding the training function to include all other personnel while modifying the operator training to address lessons learned. Significant experiences were encountered in part task simulation, job and task analysis, decision analysis and with various external committees. These experiences led to specific opinions on industry needs in the areas of staffing, regulation, importance of training and contractor assistance

Computer software design description for the Treated Effluent Disposal Facility (TEDF), Project L-045H, Operator Training Station (OTS)

International Nuclear Information System (INIS)

Carter, R.L. Jr.

1994-01-01

The Treated Effluent Disposal Facility (TEDF) Operator Training Station (OTS) is a computer-based training tool designed to aid plant operations and engineering staff in familiarizing themselves with the TEDF Central Control System (CCS)

High-Throughput Automatic Training System for Odor-Based Learned Behaviors in Head-Fixed Mice

Directory of Open Access Journals (Sweden)

Zhe Han

2018-02-01

Full Text Available Understanding neuronal mechanisms of learned behaviors requires efficient behavioral assays. We designed a high-throughput automatic training system (HATS for olfactory behaviors in head-fixed mice. The hardware and software were constructed to enable automatic training with minimal human intervention. The integrated system was composed of customized 3D-printing supporting components, an odor-delivery unit with fast response, Arduino based hardware-controlling and data-acquisition unit. Furthermore, the customized software was designed to enable automatic training in all training phases, including lick-teaching, shaping and learning. Using HATS, we trained mice to perform delayed non-match to sample (DNMS, delayed paired association (DPA, Go/No-go (GNG, and GNG reversal tasks. These tasks probed cognitive functions including sensory discrimination, working memory, decision making and cognitive flexibility. Mice reached stable levels of performance within several days in the tasks. HATS enabled an experimenter to train eight mice simultaneously, therefore greatly enhanced the experimental efficiency. Combined with causal perturbation and activity recording techniques, HATS can greatly facilitate our understanding of the neural-circuitry mechanisms underlying learned behaviors.

Analysis of methodology for designing education and training model for professional development in the field of radiation technology

Energy Technology Data Exchange (ETDEWEB)

Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae [Korean Association for Radiation Application, Seoul (Korea, Republic of)

2015-02-15

The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields.

Analysis of methodology for designing education and training model for professional development in the field of radiation technology

International Nuclear Information System (INIS)

Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae

2015-01-01

The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields

Data analysis of inertial sensor for train positioning detection system

Energy Technology Data Exchange (ETDEWEB)

Kim, Seong Jin; Park, Sung Soo; Lee, Jae Ho; Kang, Dong Hoon [Korea Railroad Research Institute, Uiwang (Korea, Republic of)

2015-02-15

Train positioning detection information is fundamental for high-speed railroad inspection, making it possible to simultaneously determine the status and evaluate the integrity of railroad equipment. This paper presents the results of measurements and an analysis of an inertial measurement unit (IMU) used as a positioning detection sensors. Acceleration and angular rate measurements from the IMU were analyzed in the amplitude and frequency domains, with a discussion on vibration and train motions. Using these results and GPS information, the positioning detection of a Korean tilting train express was performed from Naju station to Illo station on the Honam-line. The results of a synchronized analysis of sensor measurements and train motion can help in the design of a train location detection system and improve the positioning detection performance.

Khmelnitsky NPP personnel training system improvement

International Nuclear Information System (INIS)

Sapronov, V.G.; Issupov, V.I.

1996-01-01

Khmelnitsky nuclear power plant personnel training system improvement is described, including creation of Training center, development of training courses based on SAT methodology, development of training hardware

Developing a Webfires Training System

Science.gov (United States)

2017-06-01

8  Figure 2.  Waterfall Process Model. ...........................................................................11  Figure 3.  Spiral ...training system (WFTS). The third chapter in this section provides an overview of the purpose and methodology of the future training system. Chapter...Waterfall Process Model. b. Spiral Model The second systems engineering process model is the spiral process model. According to Blanchard and Fabrycky

Nonlinear Robust Observer-Based Fault Detection for Networked Suspension Control System of Maglev Train

Directory of Open Access Journals (Sweden)

Yun Li

2013-01-01

Full Text Available A fault detection approach based on nonlinear robust observer is designed for the networked suspension control system of Maglev train with random induced time delay. First, considering random bounded time-delay and external disturbance, the nonlinear model of the networked suspension control system is established. Then, a nonlinear robust observer is designed using the input of the suspension gap. And the estimate error is proved to be bounded with arbitrary precision by adopting an appropriate parameter. When sensor faults happen, the residual between the real states and the observer outputs indicates which kind of sensor failures occurs. Finally, simulation results using the actual parameters of CMS-04 maglev train indicate that the proposed method is effective for maglev train.

Ukrainian National System of MC&A Training on Regular Basis at the George Kuzmych Training Center

International Nuclear Information System (INIS)

Kyryshchuk, V.; Gavrilyuk, V.; Drapey, S.; Romanova, O.; Levina, E.; Proskurin, D.; Gavrilyuk-Burakova, A.; Parkhomenko, V.; Van Dassen, L.; Delalic, Z.

2015-01-01

The George Kuzmych Training Center (GKTC) was created at the Kyiv Institute for Nuclear Research as a result of collaborative efforts between the United States and Ukraine in 1998. Later the European Commission (EC) and Sweden joined the USA supporting MC&A aspects of the GKTC activity. The GKTC was designated by the Ukrainian Government to provide the MPC&A training and methodological assistance to nuclear facilities and nuclear specialists. In order to increase the efficiency of State MC&A system an essential number of new regulations, norms and rules was developed demanding regular and more intensive MC&A experts training from the Regulatory Body of Ukraine and all nuclear facilities. For this purpose ten training courses were developed by the GKTC under the EC contract taking into account both specifics of Ukrainian nuclear facilities and expertise level of their personnel. Along with the NDA training laboratory created with the US DOE financial support and methodological assistance in 2003, a new surveillance and containment laboratory was created under the EC contract and with US DOE financial support as well. Moreover, under the EC contract the laboratory was equipped with the state-of-the-art and most advanced means of surveillance and containment strengthening even more the GKTC training opportunities. As a result, the MC&A experts from all nuclear facilities and Regulatory Body of Ukraine can regularly be trained practically on all MC&A issues. This paper briefly describes the practical efforts applied to improve Ukrainian MC&A systems both at the State and facility levels and real results on the way to develop the National System for MC&A regular training at the GKTC, problems encountered and their solution, comments, suggestions and recommendations for the future activity to promote and improve the nuclear security culture in Ukraine. (author)

Sustainable design training cards as a way to promote active learning

DEFF Research Database (Denmark)

Hasling, Karen Marie; Ræbild, Ulla

2017-01-01

to understand sustainability in a corporate organisation working with materials and products for the fashion market (authors, 2016). Here the training cards translate these findings to become operationalised in the organisation as a communication tool. The training cards were developed as a methods-focused side...... project that followed a design project conducted by two fashion designers running from August to December 2016. Based on an existing collection of sustainable training cards used in teaching, a draft version of the cards was introduced to the designers in September 2016. In the following months interviews...... and in teaching sustainability in fashion and textiles design education. In the paper we want to discuss, why and how training cards can promote active learning and be used to obtain knowledge on chosen and often complex topics in a simplified manner. This will be based on our experiences with the developed...

Design of subjects training on reactor simulator and feasibility study - toward the empirical evaluation of interface design concept

International Nuclear Information System (INIS)

Yamaguchi, Y.; Furukawa, H.; Tanabe, F.

1998-01-01

On-going JAERI's project for empirical evaluation of the ecological interface design concept was first described. The empirical evaluation is planned to be proceeded through three consecutive steps; designing and actual implementation of the interface on reactor simulator, verification of the interface created, and the validation by the simulator experiment. For conducting the project, three different experimental resources are prerequisite, that are, data analysis method for identifying the operator's strategies, experimental facility including reactor simulator, and experimental subjects or subjects training method. Among the three experimental resources, subjects training method was recently designed and a simulator experiment was earned out in order to examine the feasibility of the designed training method. From the experiment and analysis of the experimental records, we could conclude that it is feasible that the experimental subjects having an appropriate technical basis can gain the sufficient competence for evaluation work of the interface design concept by using the training method designed. (author)

A Prototype HTML Training System for Graphic Communication Majors

Science.gov (United States)

Runquist, Roger L.

2010-01-01

This design research demonstrates a prototype content management system capable of training graphic communication students in the creation of basic HTML web pages. The prototype serve as a method of helping students learn basic HTML structure and commands earlier in their academic careers. Exposure to the concepts of web page creation early in…

A case-oriented web-based training system for breast cancer diagnosis.

Science.gov (United States)

Huang, Qinghua; Huang, Xianhai; Liu, Longzhong; Lin, Yidi; Long, Xingzhang; Li, Xuelong

2018-03-01

Breast cancer is still considered as the most common form of cancer as well as the leading causes of cancer deaths among women all over the world. We aim to provide a web-based breast ultrasound database for online training inexperienced radiologists and giving computer-assisted diagnostic information for detection and classification of the breast tumor. We introduce a web database which stores breast ultrasound images from breast cancer patients as well as their diagnostic information. A web-based training system using a feature scoring scheme based on Breast Imaging Reporting and Data System (BI-RADS) US lexicon was designed. A computer-aided diagnosis (CAD) subsystem was developed to assist the radiologists to make scores on the BI-RADS features for an input case. The training system possesses 1669 scored cases, where 412 cases are benign and 1257 cases are malignant. It was tested by 31 users including 12 interns, 11 junior radiologists, and 8 experienced senior radiologists. This online training system automatically creates case-based exercises to train and guide the newly employed or resident radiologists for the diagnosis of breast cancer using breast ultrasound images based on the BI-RADS. After the trainings, the interns and junior radiologists show significant improvement in the diagnosis of the breast tumor with ultrasound imaging (p-value  .05). The online training system can improve the capabilities of early-career radiologists in distinguishing between the benign and malignant lesions and reduce the misdiagnosis of breast cancer in a quick, convenient and effective manner. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

DESIGN PACKAGE 1E SYSTEM SAFETY ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

M. Salem

1995-06-23

The purpose of this analysis is to systematically identify and evaluate hazards related to the Yucca Mountain Project Exploratory Studies Facility (ESF) Design Package 1E, Surface Facilities, (for a list of design items included in the package 1E system safety analysis see section 3). This process is an integral part of the systems engineering process; whereby safety is considered during planning, design, testing, and construction. A largely qualitative approach was used since a radiological System Safety Analysis is not required. The risk assessment in this analysis characterizes the accident scenarios associated with the Design Package 1E structures/systems/components(S/S/Cs) in terms of relative risk and includes recommendations for mitigating all identified risks. The priority for recommending and implementing mitigation control features is: (1) Incorporate measures to reduce risks and hazards into the structure/system/component design, (2) add safety devices and capabilities to the designs that reduce risk, (3) provide devices that detect and warn personnel of hazardous conditions, and (4) develop procedures and conduct training to increase worker awareness of potential hazards, on methods to reduce exposure to hazards, and on the actions required to avoid accidents or correct hazardous conditions.

DEVELOPMENT AND IMPLEMENTATION OF A PRACTICAL PUBLIC HEALTH TRAINING SYSTEM IN CHINA.

Science.gov (United States)

Liu, Changjiang; Zhang, Junyue; Chen, Guoyuan; Yang, Kedi

2015-03-01

Public health education is becoming an increasing priority among educators of medicine. In China, little attention has been paid to public health education reform. A new public health training system was introduced in China in 2007. We conducted this study during 2006-2012 to evaluate the graduate core competencies under the new system. Data were collected from 231 graduates and 49 public health agencies. The 144 graduates who enrolled in 2006 and were trained under the old system constituted the control group; the 87 graduates who enrolled in 2007 and were trained under the new system constituted the experimental group. Surveys of graduate core competencies found analyzing and solving problems in the laboratory, conducting on-site practice and learning new technologies were the top three abilities most expected by public health agencies. After 5-year practical ability training, the graduates in the experimental group had better performance; on-site practical ability and laboratory practical ability increased significantly by 24.5% and 20.0%, respectively. Three other important competencies also improved: designing epidemiologic surveys, collecting information from the literature and doing statistical analyses. However, preventing and controlling common diseases and dealing with emergencies remained weak. These results show the new training system should be continued, but revisions are needed to improve this training system, especially in the areas of preventing and controlling common diseases and dealing with emergencies.

The Development of Dispatcher Training Simulator in a Thermal Energy Generation System

Science.gov (United States)

Hakim, D. L.; Abdullah, A. G.; Mulyadi, Y.; Hasan, B.

2018-01-01

A dispatcher training simulator (DTS) is a real-time Human Machine Interface (HMI)-based control tool that is able to visualize industrial control system processes. The present study was aimed at developing a simulator tool for boilers in a thermal power station. The DTS prototype was designed using technical data of thermal power station boilers in Indonesia. It was then designed and implemented in Wonderware Intouch 10. The resulting simulator came with component drawing, animation, control display, alarm system, real-time trend, historical trend. This application used 26 tagnames and was equipped with a security system. The test showed that the principles of real-time control worked well. It is expected that this research could significantly contribute to the development of thermal power station, particularly in terms of its application as a training simulator for beginning dispatchers.

Modeling and simulation for RF system design

CERN Document Server

Frevert, Ronny; Jancke, Roland; Knöchel, Uwe; Schwarz, Peter; Kakerow, Ralf; Darianian, Mohsen

2005-01-01

Focusing on RF specific modeling and simulation methods, and system and circuit level descriptions, this work contains application-oriented training material. Accompanied by a CD- ROM, it combines the presentation of a mixed-signal design flow, an introduction into VHDL-AMS and Verilog-A, and the application of commercially available simulators.

The design of scenario-based training from the resilience engineering perspective: a study with grid electricians.

Science.gov (United States)

Saurin, Tarcisio Abreu; Wachs, Priscila; Righi, Angela Weber; Henriqson, Eder

2014-07-01

Although scenario-based training (SBT) can be an effective means to help workers develop resilience skills, it has not yet been analyzed from the resilience engineering (RE) perspective. This study introduces a five-stage method for designing SBT from the RE view: (a) identification of resilience skills, work constraints and actions for re-designing the socio-technical system; (b) design of template scenarios, allowing the simulation of the work constraints and the use of resilience skills; (c) design of the simulation protocol, which includes briefing, simulation and debriefing; (d) implementation of both scenarios and simulation protocol; and (e) evaluation of the scenarios and simulation protocol. It is reported how the method was applied in an electricity distribution company, in order to train grid electricians. The study was framed as an application of design science research, and five research outputs are discussed: method, constructs, model of the relationships among constructs, instantiations of the method, and theory building. Concerning the last output, the operationalization of the RE perspective on three elements of SBT is presented: identification of training objectives; scenario design; and debriefing. Copyright © 2013 Elsevier Ltd. All rights reserved.

Development of NPP personnel training system in Ukraine

Energy Technology Data Exchange (ETDEWEB)

Tarykin, V. [Operation Personnel Training Department, Khmelnitsky NPP, Training Center, Neteshin 30100, Khmelnitsky region (Ukraine)]. E-mail: tarykinv@ukr.net

2005-07-01

Modern personnel training and retraining system is a guarantee of NPPs safe reliable operation. Since the time when independence of Ukraine was proclaimed personnel training system was created directly at NPPs. This system is based on the latest legislation framework, developed subject to IAEA recommendations, gained international experience in the field of personnel training in view of increased demands to personnel qualification. Training Centers, formed at each plant, form one of the main components of NPP personnel training. Personnel training at Training Centers is performed in accordance with standard programmes. Simulator training base was created by joint efforts of specialists from the USA, Russia and Ukraine. Establishing manager training system and replacement reserves for National Nuclear Energy Generating Company 'ENERGOATOM' (NNEGC 'ENERGOATOM') managerial personnel, including training programme and training materials development, teacher selection and training, is under way. (author)

Cyber Security Testing and Training Programs for Industrial Control Systems

Energy Technology Data Exchange (ETDEWEB)

Daniel Noyes

2012-03-01

Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

Carboy Security Testing and Training Programs for Industrial Control Systems

International Nuclear Information System (INIS)

Noyes, Daniel

2012-01-01

Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These training vary from web-based cyber security training for control systems engineers to more advanced hands-on training that culminates with a Red Team/Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors

Cyber Security Testing and Training Programs for Industrial Control Systems

International Nuclear Information System (INIS)

Noyes, Daniel

2012-01-01

Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

Carboy Security Testing and Training Programs for Industrial Control Systems

Energy Technology Data Exchange (ETDEWEB)

Noyes, Daniel [Idaho National Laboratory, Idaho (United States)

2012-03-15

Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These training vary from web-based cyber security training for control systems engineers to more advanced hands-on training that culminates with a Red Team/Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

Training to Enhance Design Team Performance: A Cure for Tunnel Vision

Science.gov (United States)

Parker, James W.; Parker, Nelson C. (Technical Monitor)

2001-01-01

Design Team performance is a function of the quality and degree of academic training and the cumulative, learned experience of the individual members of the team. Teamwork, leadership, and communications certainly are factors that affect the measure of the performance of the team, but they are not addressed here. This paper focuses on accelerating the learned experience of team members and describes an organizational approach that can significantly increase the effective experience level for any engineering design team. The performance measure of the whole team can be increased by increasing the engineering disciplines' cross awareness of each other and by familiarizing them with their affect at the system level. Discipline engineers know their own discipline well, but typically are not intimately familiar with their technical interaction with and dependencies on all the other disciplines of engineering. These dependencies are design integration functions and are worked out well by the discipline engineers as long as they are involved in the design of types of systems that they have experience with.

Approach to training the trainer at the Bell System Training Center

International Nuclear Information System (INIS)

Housley, E.A.; Stevenson, J.L.

1981-01-01

The major activity of the Bell System Training Center is to develop and deliver technical training. Experts in various technical areas are selected as course developers or instructors, usually on rotational assignments. Through a series of workshops, described in this paper, combined with coaching, use of job aids and working with more experienced peers, they become competent developers or instructors. There may be similarities between the mission of the Bell System Training Center and other contexts where criticality of job performance and technical subject matter are training characteristics

Training Paraprofessionals to Implement the Picture Exchange Communication System (PECS)

Science.gov (United States)

Sloman, Glenn Matthew

2010-01-01

Based on Skinner's "Verbal Behavior" (1957), the picture exchange communication system (PECS) was designed to teach children with autism functional verbal behavior. Much research has demonstrated the effectiveness and efficiency of PECS in building verbal behavior. However, because PECS training is typically presented in a group format and later…

Designing ICT Training Material for Chinese Language Arts Teachers.

Science.gov (United States)

Lin, Janet Mei-Chuen; Wu, Cheng-Chih; Chen, Hsiu-Yen

The purpose of this research is to tailor the design of information and communications technology (ICT) training material to the needs of Chinese language arts teachers such that the training they receive will be conducive to effective integration of ICT into instruction. Eighteen experienced teachers participated in a Delphi-like survey that…

Development and utilization of simulator training replay system

International Nuclear Information System (INIS)

Suzuki, Koichi; Noji, Kunio

1998-01-01

The BWR Operator Training Center Corporation (BTC) has introduced an advanced training system called the Simulator Training Replay System. The intention of introducing this system is to enhance the effectiveness of simulator training synthetically by means of; (i) sufficient analytical pre- and post-studies in the classroom, thus, enabling instructors to use the classroom as a means of explanation and discussion with an optimized system which is closely correlated with the full-scope simulator and (ii) sufficient practical operation training using a full-scope simulator without excessive suppression of time. With this system, operational data and video images during simulator training can be reproduced in the classroom. Instructors use this system with their trainees before and after simulator training for pre- and post-studies in the classroom. (author)

GTRI Remote Monitoring System: Training and Operational Needs Assessment Analysis Report

Energy Technology Data Exchange (ETDEWEB)

Day, Debra E.; Fox, Sorcha

2012-04-20

system. As a result of this analysis, a formal training curriculum will be designed and implemented to include several blended learning delivery options. This training will be piloted at RMS sites; initial training will become a required element of RMS installation and refresher training will be considered for sustainability of operations.

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

A Comparison of Two Control Display Unit Concepts on Flight Management System Training

Science.gov (United States)

Abbott, Terence S.

1997-01-01

One of the biggest challenges for a pilot in the transition to a 'glass' cockpit is understanding the flight management system (FMS). Because of both the complex nature of the FMS and the pilot-FMS interface, a large portion of transition training is devoted to the FMS. The current study examined the impact of the primary pilot-FMS interface, the control display unit (CDU), on FMS training. Based on the hypothesis that the interface design could have a significant impact on training, an FMS simulation with two separate interfaces was developed. One interface was similar to a current-generation design, and the other was a multiwindows CDU based on graphical user interface techniques. For both application and evaluation reasons, constraints were applied to the graphical CDU design to maintain as much similarity as possible with the conventional CDU. This preliminary experiment was conducted to evaluate the interface effects on training. Sixteen pilots with no FMS experience were used in a between-subjects test. A time-compressed, airline-type FMS training environment was simulated. The subjects were trained to a fixed-time criterion, and performance was measured in a final, full-mission simulation context. This paper describes the technical approach, simulation implementation, and experimental results of this effort.

Evaluation of Strategies to Reducing Traction Energy Consumption of Metro Systems Using an Optimal Train Control Simulation Model

Directory of Open Access Journals (Sweden)

Shuai Su

2016-02-01

Full Text Available Increasing attention is being paid to the energy efficiency in metro systems to reduce the operational cost and to advocate the sustainability of railway systems. Classical research has studied the energy-efficient operational strategy and the energy-efficient system design separately to reduce the traction energy consumption. This paper aims to combine the operational strategies and the system design by analyzing how the infrastructure and vehicle parameters of metro systems influence the operational traction energy consumption. Firstly, a solution approach to the optimal train control model is introduced, which is used to design the Optimal Train Control Simulator(OTCS. Then, based on the OTCS, the performance of some important energy-efficient system design strategies is investigated to reduce the trains’ traction energy consumption, including reduction of the train mass, improvement of the kinematic resistance, the design of the energy-saving gradient, increasing the maximum traction and braking forces, introducing regenerative braking and timetable optimization. As for these energy-efficient strategies, the performances are finally evaluated using the OTCS with the practical operational data of the Beijing Yizhuang metro line. The proposed approach gives an example to quantitatively analyze the energy reduction of different strategies in the system design procedure, which may help the decision makers to have an overview of the energy-efficient performances and then to make decisions by balancing the costs and the benefits.

Designing an Adaptive Nuero-Fuzzy Inference System for Evaluating the Business Intelligence System Implementation in Software Industry

Directory of Open Access Journals (Sweden)

Iman Raeesi Vanani

2015-03-01

Full Text Available The main goal of research is designing an adaptive nuero-fuzzy inference system for evaluating the implementation of business intelligence systems in software industry. Iranian software development organizations have been facing a lot of problems in case of implementing business intelligence systems. This system would be helpful in recognizing the conditions and prerequisites of success or failure. Organizations can recalculate the neuro-fuzzy system outputs with some considerations on various inputs to figure out which inputs have the most effect on the implementation outputs. By resolving the problems on inputs, organizations can achieve a better level of implementation success. The designed system has been trained by a data set and afterwards, it has been evaluated. The trained system has reached the error value of 0.08. Eventually, some recommendations have been provided for software development firms on the areas that might need more considerations and improvements.

Design and Development Issues for Educational Robotics Training Camps

Science.gov (United States)

Ucgul, Memet; Cagiltay, Kursat

2014-01-01

The aim of this study is to explore critical design issues for educational robotics training camps and to describe how these factors should be implemented in the development of such camps. For this purpose, two robotics training camps were organized for elementary school students. The first camp had 30 children attendees, and the second had 22. As…

Development of a prototype interactive learning system using multi-media technology for mission independent training program

Science.gov (United States)

Matson, Jack E.

1992-01-01

The Spacelab Mission Independent Training Program provides an overview of payload operations. Most of the training material is currently presented in workbook form with some lecture sessions to supplement selected topics. The goal of this project was to develop a prototype interactive learning system for one of the Mission Independent Training topics to demonstrate how the learning process can be improved by incorporating multi-media technology into an interactive system. This report documents the development process and some of the problems encountered during the analysis, design, and production phases of this system.

Selection, specification, design and use of various nuclear power plant training simulators

International Nuclear Information System (INIS)

Bruno, R.; Neboyan, V.

1997-01-01

Several IAEA guidance publications on safety culture and NPP personnel training consider the role of training and particularly the role of simulators training to enhance the safety of NPP operations. Initially, the focus has been on full-scope simulators for the training of main control room operators. Presently, a wide range of different types of simulators are used at training center. Several guidance publications concerning development and use of full-scope simulators are currently available. Experience shows that other types of simulators are also effective training tools that allow simulator training for a broader range of target groups and training objectives. Based on this need, the IAEA undertook a project to prepare a report on selection, specification, design and use of various training simulators, which provides guidance to training centers and suppliers for proper selection, specification, design, and use of various form of simulators. In addition, it provides examples of their use in several Member States. This paper presents a summary of the IAEATECDOC publication on the subject. (author)

CERN Technical Training 2006: Software and System Technologies Curriculum - Scheduled

CERN Multimedia

2006-01-01

Course Sessions (October 2006-March 2007) The Software and System Technologies Curriculum of the CERN Technical Training Programme offers comprehensive training in C++, Java, Perl, Python, XML, OO programming, JCOP/PVSS, database design and Oracle. In the PERL, C++, OO and Java course series there are some places available on the following course sessions, currently scheduled until March 2007: Object-Oriented Analysis and Design using UML: 17-19 October 2006 (3 days) JAVA 2 Enterprise Edition - Part 1: Web Applications: 19-20 October 2006 (2 days) JAVA - Level 1: 30 October -1 November 2006 (3 days) PERL 5 - Advanced Aspects: 2 November 2006 (1 day) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming: 14-16 November 2006 (3 days) JAVA - Level 2: 4-7 December 2006 (4 days) C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls: 12-15 December 2006 (4 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 18-20 December 2006 (3 days) C++ for Particle Physicists:...

Development of the scenario-based training system to reduce hazards and prevent accidents during decommissioning of nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Jeong, KwanSeong; Choi, Jong-Won; Moon, JeiKwon; Choi, ByungSeon; Hyun, Dongjun; Lee, Jonghwan; Kim, IkJune; Kim, GeunHo; Kang, ShinYoung [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

Decommissioning of nuclear facilities has to be accomplished by assuring the safety of workers. Decommissioning workers need familiarization with working environments because working environment is under high radioactivity and work difficulty during decommissioning of nuclear facilities. On-the-job training of decommissioning works could effectively train decommissioning workers but this training approach could consume much costs and poor modifications of scenarios. The efficiency of virtual training system could be much better than that of physical training system. This paper was intended to develop the training system to prevent accidents for decommissioning of nuclear facilities. The requirements for the training system were drawn. The data management modules for the training system were designed. The training system of decommissioning workers was developed on the basis of virtual reality which is flexibly modified. The visualization and measurement in the training system were real-time done according as changes of the decommissioning scenario. It can be concluded that this training system enables the subject to improve his familiarization about working environments and to prevent accidents during decommissioning of nuclear facilities. In the end, the safety during decommissioning of nuclear facilities will be guaranteed under the principle of ALARA.

Development of the scenario-based training system to reduce hazards and prevent accidents during decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Jeong, KwanSeong; Choi, Jong-Won; Moon, JeiKwon; Choi, ByungSeon; Hyun, Dongjun; Lee, Jonghwan; Kim, IkJune; Kim, GeunHo; Kang, ShinYoung

2015-01-01

Decommissioning of nuclear facilities has to be accomplished by assuring the safety of workers. Decommissioning workers need familiarization with working environments because working environment is under high radioactivity and work difficulty during decommissioning of nuclear facilities. On-the-job training of decommissioning works could effectively train decommissioning workers but this training approach could consume much costs and poor modifications of scenarios. The efficiency of virtual training system could be much better than that of physical training system. This paper was intended to develop the training system to prevent accidents for decommissioning of nuclear facilities. The requirements for the training system were drawn. The data management modules for the training system were designed. The training system of decommissioning workers was developed on the basis of virtual reality which is flexibly modified. The visualization and measurement in the training system were real-time done according as changes of the decommissioning scenario. It can be concluded that this training system enables the subject to improve his familiarization about working environments and to prevent accidents during decommissioning of nuclear facilities. In the end, the safety during decommissioning of nuclear facilities will be guaranteed under the principle of ALARA

Validated design of the ITER main vacuum pumping systems

International Nuclear Information System (INIS)

Day, Chr.; Antipenkov, A.; Dremel, M.; Haas, H.; Hauer, V.; Mack, A.; Boissin, J.-C.; Class, G.; Murdoch, D.K.; Wykes, M.

2005-01-01

Forschungszentrum Karlsruhe is developing the ITER high vacuum cryogenic pumping systems (torus, cryostat, NBI) as well as the corresponding mechanical roughing pump trains. All force-cooled big cryopumps incorporate similar design of charcoal coated cryopanels cooled to 5 K with supercritical helium. A model of the torus exhaust cryopump was comprehensively characterised in the TIMO testbed at Forschungszentrum. This paper discusses the vacuum performance results of the model pump and outlines how these data were incorporated in a sound design of the whole ITER torus exhaust pumping system. To do this, the dedicated software package ITERVAC was developed which is able to describe gas flow in viscous, transitional and molecular flow regimes as needed for the gas coming through the divertor slots and along the pump ducts into the cryopumps. The entrance section between the divertor cassettes and each pumping duct was identified to be the bottleneck of the gas flow. The interrelation of achievable throughputs as a function of the divertor pressure and the cryopump pumping speed is discussed. The system design is completed by assessment of the NBI cryopump system and integrating performance curves for the roughing pump trains needed during the regeneration phases of the cryopumps. (author)

Development of education and training system for radiation workers with virtual reality technique

International Nuclear Information System (INIS)

Yamaguchi, Yoshiaki; Saito, Tadashi; Inoue, Kazuma

2006-01-01

A virtual reality education and training system was developed for radiation workers. The function of the system is designed as a scenario which is programmed with a proprietary script language capable of defining motion of objects created by three-dimensional (3D) modeling soft-ware, user interaction, sounds and text strings displayed in the scene. Combining these functions enables the system to provide lectures and to judge the user's action. The system consists of the 3D model of the radiation facilities and three modes of scenarios (guidance, training and end-of-course examination) including the procedure to enter and exit, experiment, measurement, radioactive waste classification and accidents. By combining these modes, the trainee of education and training is possible to learn safety handling and how to act in the case of fire or earthquake. (author)

Geoscience Training for NASA Astronaut Candidates

Science.gov (United States)

Young, K. E.; Evans, C. A.; Bleacher, J. E.; Graff, T. G.; Zeigler, R.

2017-01-01

After being selected to the astronaut office, crewmembers go through an initial two year training flow, astronaut candidacy, where they learn the basic skills necessary for spaceflight. While the bulk of astronaut candidate training currently centers on the multiple subjects required for ISS operations (EVA skills, Russian language, ISS systems, etc.), training also includes geoscience training designed to train crewmembers in Earth observations, teach astronauts about other planetary systems, and provide field training designed to investigate field operations and boost team skills. This training goes back to Apollo training and has evolved to support ISS operations and future exploration missions.

49 CFR 236.825 - System, automatic train control.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false System, automatic train control. 236.825 Section..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.825 System, automatic train control. A system so arranged that its operation will automatically...

Video game-based neuromuscular electrical stimulation system for calf muscle training: a case study.

Science.gov (United States)

Sayenko, D G; Masani, K; Milosevic, M; Robinson, M F; Vette, A H; McConville, K M V; Popovic, M R

2011-03-01

A video game-based training system was designed to integrate neuromuscular electrical stimulation (NMES) and visual feedback as a means to improve strength and endurance of the lower leg muscles, and to increase the range of motion (ROM) of the ankle joints. The system allowed the participants to perform isotonic concentric and isometric contractions in both the plantarflexors and dorsiflexors using NMES. In the proposed system, the contractions were performed against exterior resistance, and the angle of the ankle joints was used as the control input to the video game. To test the practicality of the proposed system, an individual with chronic complete spinal cord injury (SCI) participated in the study. The system provided a progressive overload for the trained muscles, which is a prerequisite for successful muscle training. The participant indicated that he enjoyed the video game-based training and that he would like to continue the treatment. The results show that the training resulted in a significant improvement of the strength and endurance of the paralyzed lower leg muscles, and in an increased ROM of the ankle joints. Video game-based training programs might be effective in motivating participants to train more frequently and adhere to otherwise tedious training protocols. It is expected that such training will not only improve the properties of their muscles but also decrease the severity and frequency of secondary complications that result from SCI. Copyright © 2010 IPEM. All rights reserved.

A Dynamical Training and Design Simulator for Active Catheters

Directory of Open Access Journals (Sweden)

Georges Dumont

2008-11-01

Full Text Available This work addresses the design of an active multi-link micro-catheter actuated by Shape Memory Alloy (SMA micro actuators. This may be a response to one medical major demand on such devices, which will be useful for surgical explorations and interventions. In this paper, we focus on a training and design simulator dedicated to such catheters. This simulator is based on an original simulation platform (OpenMASK. The catheter is a robotic system, which is evaluated by a dynamical simulation addressing a navigation task in its environment. The design of the prototype and its mechanical model are presented. We develop an interaction model for contact. This model uses a real medical database for which distance cartography is proposed. Then we focus on an autonomous control model based on a multi-agent approach and including the behaviour description of the SMA actuators. Results of mechanical simulations including interaction with the ducts are presented. Furthermore, the interest of such a simulator is presented by applying virtual prototyping techniques for the design optimization. This optimization process is achieved by using genetic algorithms at different stages with respect to the specified task.

A Dynamical Training and Design Simulator for Active Catheters

Directory of Open Access Journals (Sweden)

Georges Dumont

2004-12-01

Full Text Available This work addresses the design of an active multi-link micro-catheter actuated by Shape Memory Alloy (SMA micro actuators. This may be a response to one medical major demand on such devices, which will be useful for surgical explorations and interventions. In this paper, we focus on a training and design simulator dedicated to such catheters. This simulator is based on an original simulation platform (OpenMASK. The catheter is a robotic system, which is evaluated by a dynamical simulation addressing a navigation task in its environment. The design of the prototype and its mechanical model are presented. We develop an interaction model for contact. This model uses a real medical database for which distance cartography is proposed. Then we focus on an autonomous control model based on a multi-agent approach and including the behaviour description of the SMA actuators. Results of mechanical simulations including interaction with the ducts are presented. Furthermore, the interest of such a simulator is presented by applying virtual prototyping techniques for the design optimization. This optimization process is achieved by using genetic algorithms at different stages with respect to the specified task.

TRAINING SYSTEM OF FUTURE SPECIALISTS: QUALITY CONTROL

Directory of Open Access Journals (Sweden)

Vladimir A. Romanov

2015-01-01

Full Text Available The aim of the investigation is development of innovative strategy of quality control training of engineers and skilled workers (hereinafter – future specialists in educational professional organizations on the principles of social partnership.Methods. Theoretic: theoretic and methodological analysis, polytheoretic synthesis, modeling. Empirical: research and generalization of the system, process and competence – based approaches experience, experiment, observation, surveys, expert evaluation, SWOT-analysis as a method of strategic planning which is to identify the internal and external factors (socio-cultural of the organization surrounding.Results. The strategy of the development of the process of quality control training in educational professional organizations and a predictive model of the system of quality control training for future engineers and workers have been created on the analysis and synthesis of a quantitative specification of the quality, the obtained experience and success in control training of future specialists in educational professional organizations in recent economic and educational conditions.Scientific novelty. There has been built a predicative model of quality control training of future specialists to meet modern standards and the principles of social partnership; the control algorithm of the learning process, developed in accordance with the standards (international of quality ISO in the implementation of the quality control systems of the process approach (matrix-based responsibility, competence and remit of those responsible for the education process in the educational organization, the «problem» terms and diagnostic tools for assessing the quality of professional training of future specialists. The perspective directions of innovation in the control of the quality of future professionals training have been determined; the parameters of a comprehensive analysis of the state of the system to ensure the

Guidelines for control room systems design. Working material. Report

International Nuclear Information System (INIS)

1993-01-01

This report contains comprehensive technical and methodological information and recommendations for the benefit of Member States for advice and assistance in ''NPP control room systems'' design backfitting existing nuclear power plants and design for future stations. The term ''Control Room Systems'' refers to the entire human/machine interface for the nuclear stations - including the main control room, back-ups control room and the emergency control rooms, local panels, technical support centres, operating staff, operating procedures, operating training programs, communications, etc. Refs, figs and tabs

Design of a Novel Telerehabilitation System with a Force-Sensing Mechanism

Directory of Open Access Journals (Sweden)

Songyuan Zhang

2015-05-01

Full Text Available Many stroke patients are expected to rehabilitate at home, which limits their access to proper rehabilitation equipment, treatment, or assessment by therapists. We have developed a novel telerehabilitation system that incorporates a human-upper-limb-like device and an exoskeleton device. The system is designed to provide the feeling of real therapist–patient contact via telerehabilitation. We applied the principle of a series elastic actuator to both the master and slave devices. On the master side, the therapist can operate the device in a rehabilitation center. When performing passive training, the master device can detect the therapist’s motion while controlling the deflection of elastic elements to near-zero, and the patient can receive the motion via the exoskeleton device. When performing active training, the design of the force-sensing mechanism in the master device can detect the assisting force added by the therapist. The force-sensing mechanism also allows force detection with an angle sensor. Patients’ safety is guaranteed by monitoring the motor’s current from the exoskeleton device. To compensate for any possible time delay or data loss, a torque-limiter mechanism was also designed in the exoskeleton device for patients’ safety. Finally, we successfully performed a system performance test for passive training with transmission control protocol/internet protocol communication.

Training Students’ Science Process Skills through Didactic Design on Work and Energy

Science.gov (United States)

Ramayanti, S.; Utari, S.; Saepuzaman, D.

2017-09-01

Science Process Skills (SPS) has not been optimally trained to the students in the learning activity. The aim of this research is finding the ways to train SPS on the subject of Work and Energy. One shot case study design is utilized in this research that conducted on 32 students in one of the High Schools in Bandung. The students’ SPS responses were analyzed by the development SPS based assessment portfolios. The results of this research showed the didactic design that had been designed to training the identifying variables skills, formulating hypotheses, and the experiment activity shows the development. But the didactic design to improve the students’ predicting skills shows that the development is still not optimal. Therefore, in the future studies need to be developed the didactic design on the subject Work and Energy that exercising these skills.

Development of cyber training system for nuclear fields

International Nuclear Information System (INIS)

Kim, Young Taek; Park, Jong Kyun; Lee, Eui Jin; Lee, Han Young; Choi, Nan Young

2002-02-01

This report describes on technical contents related cyber training system construct on KAERI Nuclear Training Center, and on using cases of cyber education in domestic and foreign countries. Also realtime training system through the internet and cyber training management system for atomic fields is developed. All users including trainee, course managers and lecturers can use new technical for create new paradigm

Design of a complex virtual reality simulation to train finger motion for persons with hemiparesis: a proof of concept study.

Science.gov (United States)

Adamovich, Sergei V; Fluet, Gerard G; Mathai, Abraham; Qiu, Qinyin; Lewis, Jeffrey; Merians, Alma S

2009-07-17

Current neuroscience has identified rehabilitation approaches with the potential to stimulate adaptive changes in the brains of persons with hemiparesis. These approaches include, intensive task-oriented training, bimanual activities and balancing proximal and distal upper extremity interventions to reduce competition between these segments for neural territory. This paper describes the design and feasibility testing of a robotic/virtual environment system designed to train the hand and arm of persons with hemiparesis. The system employs a simulated piano that presents visual, auditory and tactile feedback comparable to an actual piano. Arm tracking allows patients to train both the arm and hand as a coordinated unit, emphasizing the integration of both transport and manipulation phases. The piano trainer includes songs and scales that can be performed with one or both hands. Adaptable haptic assistance is available for more involved subjects. An algorithm adjusts task difficulty in proportion to subject performance. A proof of concept study was performed on four subjects with upper extremity hemiparesis secondary to chronic stroke to establish: a) the safety and feasibility of this system and b) the concurrent validity of robotically measured kinematic and performance measures to behavioral measures of upper extremity function. None of the subjects experienced adverse events or responses during or after training. As a group, the subjects improved in both performance time and key press accuracy. Three of the four subjects demonstrated improvements in fractionation, the ability to move each finger individually. Two subjects improved their aggregate time on the Jebsen Test of Hand Function and three of the four subjects improved in Wolf Motor Function Test aggregate time. The system designed in this paper has proven to be safe and feasible for the training of hand function for persons with hemiparesis. It features a flexible design that allows for the use and further

Design of a complex virtual reality simulation to train finger motion for persons with hemiparesis: a proof of concept study

Directory of Open Access Journals (Sweden)

Qiu Qinyin

2009-07-01

Full Text Available Abstract Background Current neuroscience has identified rehabilitation approaches with the potential to stimulate adaptive changes in the brains of persons with hemiparesis. These approaches include, intensive task-oriented training, bimanual activities and balancing proximal and distal upper extremity interventions to reduce competition between these segments for neural territory. Methods This paper describes the design and feasibility testing of a robotic/virtual environment system designed to train the hand and arm of persons with hemiparesis. The system employs a simulated piano that presents visual, auditory and tactile feedback comparable to an actual piano. Arm tracking allows patients to train both the arm and hand as a coordinated unit, emphasizing the integration of both transport and manipulation phases. The piano trainer includes songs and scales that can be performed with one or both hands. Adaptable haptic assistance is available for more involved subjects. An algorithm adjusts task difficulty in proportion to subject performance. A proof of concept study was performed on four subjects with upper extremity hemiparesis secondary to chronic stroke to establish: a the safety and feasibility of this system and b the concurrent validity of robotically measured kinematic and performance measures to behavioral measures of upper extremity function. Results None of the subjects experienced adverse events or responses during or after training. As a group, the subjects improved in both performance time and key press accuracy. Three of the four subjects demonstrated improvements in fractionation, the ability to move each finger individually. Two subjects improved their aggregate time on the Jebsen Test of Hand Function and three of the four subjects improved in Wolf Motor Function Test aggregate time. Conclusion The system designed in this paper has proven to be safe and feasible for the training of hand function for persons with hemiparesis

Design a Learning-Oriented Fall Event Reporting System Based on Kirkpatrick Model.

Science.gov (United States)

Zhou, Sicheng; Kang, Hong; Gong, Yang

2017-01-01

Patient fall has been a severe problem in healthcare facilities around the world due to its prevalence and cost. Routine fall prevention training programs are not as effective as expected. Using event reporting systems is the trend for reducing patient safety events such as falls, although some limitations of the systems exist at current stage. We summarized these limitations through literature review, and developed an improved web-based fall event reporting system. The Kirkpatrick model, widely used in the business area for training program evaluation, has been integrated during the design of our system. Different from traditional event reporting systems that only collect and store the reports, our system automatically annotates and analyzes the reported events, and provides users with timely knowledge support specific to the reported event. The paper illustrates the design of our system and how its features are intended to reduce patient falls by learning from previous errors.

Design and use of an engineering simulator for power plant and training simulator updates

International Nuclear Information System (INIS)

Sharawy, P.S.; Kennard, J.R.; Chou, Q.B.

1990-01-01

The advancement in real-time simulators has been facilitated by the availability of increasingly powerful computing devices at reduced costs for use in conjunction with high-fidelity simulation software. Ontario Hydro's commitment to the safe and reliable operation of its nuclear power plants was one of the factors which influenced its decision to build a plant-replica operator training simulator for each of its nuclear generating stations. This investment soon proved to have advantages beyond those originally envisaged. It become apparent that because the software developed for these simulators met rigorous acceptance criteria, it could be used on an engineering simulator to effectively investigate problems occurring at the stations. It could also serve as a design aid for station modifications. Encouraged by the success of early experimentation in the use of its training simulators for concept validation and verification, Ontario Hydro is developing a low-cost central facility - the Instrumentation and Control Engineering Simulator (ICES) - for use in its design work. This facility incorporates the software of its training simulators and includes a user-friendly generic interface which enables designers to configure and operate it. Inclusion of the engineering simulator in all phases of the design process, from the original concept to implementation and verification, will make it possible to shorten the design period significantly while achieving a high level of quality. It will also facilitate the rapid retrofit of simulators to reflect station modifications. This paper will recount Ontario Hydro's experience in the use of simulators for design work and will specifically discuss the design features and system performance of its engineering simulator

Study on a Footwork Training and Testing System

Directory of Open Access Journals (Sweden)

Qi Hu

2018-02-01

Full Text Available In the sport science fields, for a long time there are various attempts to explore more advanced technology in order to collect kinds of information concerned during athletes training and matches. In the paper, a footwork training and testing system has been developed by adopting the advanced technology of Wireless Sensor Network (WSN. The system is comprised of some wireless senor nodes and gateways, system control software and so on. By means of the system, the daily footwork training methods and modes will be simulated to automatically guide the training of the athletes, at the same time the training data concerned will be automatically recorded, including moving velocity, moving frequency and success average, moving exercise duration and so on, and it is facilitate to evaluate digitally the training and testing effects for coaches and athletes. The system will bring about an auxiliary means in sport science training and research, make coaches and researchers have more options for the technical and information forms, and provide the technology foundation for synchronizing and intermingling the training and testing smoothly.

Complexity, Training Paradigm Design, and the Contribution of Memory Subsystems to Grammar Learning

Science.gov (United States)

Ettlinger, Marc; Wong, Patrick C. M.

2016-01-01

Although there is variability in nonnative grammar learning outcomes, the contributions of training paradigm design and memory subsystems are not well understood. To examine this, we presented learners with an artificial grammar that formed words via simple and complex morphophonological rules. Across three experiments, we manipulated training paradigm design and measured subjects' declarative, procedural, and working memory subsystems. Experiment 1 demonstrated that passive, exposure-based training boosted learning of both simple and complex grammatical rules, relative to no training. Additionally, procedural memory correlated with simple rule learning, whereas declarative memory correlated with complex rule learning. Experiment 2 showed that presenting corrective feedback during the test phase did not improve learning. Experiment 3 revealed that structuring the order of training so that subjects are first exposed to the simple rule and then the complex improved learning. The cumulative findings shed light on the contributions of grammatical complexity, training paradigm design, and domain-general memory subsystems in determining grammar learning success. PMID:27391085

Complexity, Training Paradigm Design, and the Contribution of Memory Subsystems to Grammar Learning.

Science.gov (United States)

Antoniou, Mark; Ettlinger, Marc; Wong, Patrick C M

2016-01-01

Although there is variability in nonnative grammar learning outcomes, the contributions of training paradigm design and memory subsystems are not well understood. To examine this, we presented learners with an artificial grammar that formed words via simple and complex morphophonological rules. Across three experiments, we manipulated training paradigm design and measured subjects' declarative, procedural, and working memory subsystems. Experiment 1 demonstrated that passive, exposure-based training boosted learning of both simple and complex grammatical rules, relative to no training. Additionally, procedural memory correlated with simple rule learning, whereas declarative memory correlated with complex rule learning. Experiment 2 showed that presenting corrective feedback during the test phase did not improve learning. Experiment 3 revealed that structuring the order of training so that subjects are first exposed to the simple rule and then the complex improved learning. The cumulative findings shed light on the contributions of grammatical complexity, training paradigm design, and domain-general memory subsystems in determining grammar learning success.

Complexity, Training Paradigm Design, and the Contribution of Memory Subsystems to Grammar Learning.

Directory of Open Access Journals (Sweden)

Mark Antoniou

Full Text Available Although there is variability in nonnative grammar learning outcomes, the contributions of training paradigm design and memory subsystems are not well understood. To examine this, we presented learners with an artificial grammar that formed words via simple and complex morphophonological rules. Across three experiments, we manipulated training paradigm design and measured subjects' declarative, procedural, and working memory subsystems. Experiment 1 demonstrated that passive, exposure-based training boosted learning of both simple and complex grammatical rules, relative to no training. Additionally, procedural memory correlated with simple rule learning, whereas declarative memory correlated with complex rule learning. Experiment 2 showed that presenting corrective feedback during the test phase did not improve learning. Experiment 3 revealed that structuring the order of training so that subjects are first exposed to the simple rule and then the complex improved learning. The cumulative findings shed light on the contributions of grammatical complexity, training paradigm design, and domain-general memory subsystems in determining grammar learning success.

Interactive motion tracing for Rowing Training

DEFF Research Database (Denmark)

Dai, Zheng

2011-01-01

This paper studies motion tracking and team coordination for the training of rowers. The design research is drawn upon the division of contribution between the designers input and the user input in a design process. We built a training system that can record and show the action of a rower’s hand....... Designer proposed solutions for both a fundamental problem and a very advanced problem. Users guided the design direction, and spoke what they expected or what they disliked. As the result, our design provided a real-time recording tool for rowers and coaches to discuss and analyze the motion. The coach...... can correct the path immediately and save the corrected path for the rower to try to imitate and train. The members in a rowing team train with the same path from to coordinate and synchronize their actions for the best performance. The training system was developed through a user-centered design...

AcademyHealth's Delivery System Science Fellowship: Training Embedded Researchers to Design, Implement, and Evaluate New Models of Care.

Science.gov (United States)

Kanani, Nisha; Hahn, Erin; Gould, Michael; Brunisholz, Kimberly; Savitz, Lucy; Holve, Erin

2017-07-01

AcademyHealth's Delivery System Science Fellowship (DSSF) provides a paid postdoctoral pragmatic learning experience to build capacity within learning healthcare systems to conduct research in applied settings. The fellowship provides hands-on training and professional leadership opportunities for researchers. Since its inception in 2012, the program has grown rapidly, with 16 health systems participating in the DSSF to date. In addition to specific projects conducted within health systems (and numerous publications associated with those initiatives), the DSSF has made several broader contributions to the field, including defining delivery system science, identifying a set of training objectives for researchers working in delivery systems, and developing a national collaborative network of care delivery organizations, operational leaders, and trainees. The DSSF is one promising approach to support higher-value care by promoting continuous learning and improvement in health systems. © 2017 Society of Hospital Medicine.

A small satellite design for deep space network testing and training

Science.gov (United States)

Mcwilliams, Dennis; Slatton, Clint; Norman, Cassidy; Araiza, Joe; Jones, Jason; Tedesco, Mark; Wortman, Michael; Opiela, John; Lett, Pat; Clavenna, Michael

1993-01-01

With the continuing exploration of the Solar System and the reemphasis on Earth focused missions, the need for faster data transmission rates has grown. Ka-band could allow a higher data delivery rate over the current X-band, however the adverse effects of the Earth's atmosphere on Ka are as yet unknown. The Deep Space Network and Jet Propulsion Lab have proposed to launch a small satellite that would simultaneously transmit X and Ka signals to test the viability of switching to Ka-band. The Mockingbird Design Team at the University of Texas at Austin applied small satellite design principles to achieve this objective. The Mockingbird design, named BATSAT, incorporates simple, low-cost systems designed for university production and testing. The BATSAT satellite is a 0.64 m diameter, spherical panel led satellite, mounted with solar cells and omni-directional antennae. The antennae configuration negates the need for active attitude control or spin stabilization. The space-frame truss structure was designed for 11 g launch loads while allowing for easy construction and solar-panel mounting. The communication system transmits at 1 mW by carrying the required Ka and X-band transmitters, as well as an S band transmitter used for DSN training. The power system provides the 8.6 W maximum power requirements via silicon solar arrays and nickel-cadmium batteries. The BATSAT satellite will be lofted into an 1163 km, 70 deg orbit by the Pegasus launch system. This orbit fulfills DSN dish slew rate requirements while keeping the satellite out of the heaviest regions of the Van Allen radiation belts. Each of the three DSN stations capable of receiving Ka-band (Goldstone, Canberra, and Madrid) will have an average of 85 minutes of view-time per day over the satellites ten year design life. Mockingbird Designs hopes that its small satellite design will not only be applicable to this specific mission scenario, but that it could easily be modified for instrument capability for

A small satellite design for deep space network testing and training

Science.gov (United States)

McWilliams, Dennis; Slatton, Clint; Norman, Cassidy; Araiza, Joe; Jones, Jason; Tedesco, Mark; Wortman, Michael; Opiela, John; Lett, Pat; Clavenna, Michael

1993-05-01

With the continuing exploration of the Solar System and the reemphasis on Earth focused missions, the need for faster data transmission rates has grown. Ka-band could allow a higher data delivery rate over the current X-band, however the adverse effects of the Earth's atmosphere on Ka are as yet unknown. The Deep Space Network and Jet Propulsion Lab have proposed to launch a small satellite that would simultaneously transmit X and Ka signals to test the viability of switching to Ka-band. The Mockingbird Design Team at the University of Texas at Austin applied small satellite design principles to achieve this objective. The Mockingbird design, named BATSAT, incorporates simple, low-cost systems designed for university production and testing. The BATSAT satellite is a 0.64 m diameter, spherical panel led satellite, mounted with solar cells and omni-directional antennae. The antennae configuration negates the need for active attitude control or spin stabilization. The space-frame truss structure was designed for 11 g launch loads while allowing for easy construction and solar-panel mounting. The communication system transmits at 1 mW by carrying the required Ka and X-band transmitters, as well as an S band transmitter used for DSN training. The power system provides the 8.6 W maximum power requirements via silicon solar arrays and nickel-cadmium batteries. The BATSAT satellite will be lofted into an 1163 km, 70 deg orbit by the Pegasus launch system. This orbit fulfills DSN dish slew rate requirements while keeping the satellite out of the heaviest regions of the Van Allen radiation belts. Each of the three DSN stations capable of receiving Ka-band (Goldstone, Canberra, and Madrid) will have an average of 85 minutes of view-time per day over the satellites ten year design life. Mockingbird Designs hopes that its small satellite design will not only be applicable to this specific mission scenario, but that it could easily be modified for instrument capability for

System design package for SIMS Prototype System 4, solar heating and domestic hot water

Energy Technology Data Exchange (ETDEWEB)

1978-11-01

This report is a collation of documents and drawings that describe a prototype solar heating and hot water system using air type solar energy collection techniques. The system consists of a modular designed prepackaged solar unit containing solar collctors, a rock storage container, blowers, dampers, ducting, air-to-water heat exchanger, DHW preheat tank, piping and system controls. The system was designed to be installed adjacent to a small single family dwelling. The description, performance specification, subsystem drawings, verification plan/procedure, and hazard analysis of the system are packaged for evaluation of the system with inforation sufficient to assemble a similar system. The prepackage solar unit has been installed at the Mississippi Power and Light Company, Training Facilities, Clinton, Mississippi.

Vertical flight training: An overview of training and flight simulator technology with emphasis on rotary-wing requirements

Science.gov (United States)

Alderete, Thomas S.; Ascencio-Lee, Carmen E.; Bray, Richard; Carlton, John; Dohme, Jack; Eshow, Michelle M.; Francis, Stephen; Lee, Owen M.; Lintern, Gavan; Lombardo, David A.

1994-01-01

The principal purpose of this publication is to provide a broad overview of the technology that is relevant to the design of aviation training systems and of the techniques applicable to the development, use, and evaluation of those systems. The issues addressed in our 11 chapters are, for the most part, those that would be expected to surface in any informed discussion of the major characterizing elements of aviation training systems. Indeed, many of the same facets of vertical-flight training discussed were recognized and, to some extent, dealt with at the 1991 NASA/FAA Helicopter Simulator Workshop. These generic topics are essential to a sound understanding of training and training systems, and they quite properly form the basis of any attempt to systematize the development and evaluation of more effective, more efficient, more productive, and more economical approaches to aircrew training. Individual chapters address the following topics: an overview of the vertical flight industry: the source of training requirements; training and training schools: meeting current requirements; training systems design and development; transfer of training and cost-effectiveness; the military quest for flight training effectiveness; alternative training systems; training device manufacturing; simulator aero model implementation; simulation validation in the frequency domain; cockpit motion in helicopter simulation; and visual space perception in flight simulators.

Survey on multisensory feedback virtual reality dental training systems.

Science.gov (United States)

Wang, D; Li, T; Zhang, Y; Hou, J

2016-11-01

Compared with traditional dental training methods, virtual reality training systems integrated with multisensory feedback possess potentials advantages. However, there exist many technical challenges in developing a satisfactory simulator. In this manuscript, we systematically survey several current dental training systems to identify the gaps between the capabilities of these systems and the clinical training requirements. After briefly summarising the components, functions and unique features of each system, we discuss the technical challenges behind these systems including the software, hardware and user evaluation methods. Finally, the clinical requirements of an ideal dental training system are proposed. Future research/development areas are identified based on an analysis of the gaps between current systems and clinical training requirements. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A novel balance training system using multimodal biofeedback.

Science.gov (United States)

Afzal, Muhammad Raheel; Oh, Min-Kyun; Choi, Hye Young; Yoon, Jungwon

2016-04-22

A biofeedback-based balance training system can be used to provide the compromised sensory information to subjects in order to retrain their sensorimotor function. In this study, the design and evaluation of the low-cost, intuitive biofeedback system developed at Gyeongsang National University is extended to provide multimodal biofeedback for balance training by utilization of visual and haptic modalities. The system consists of a smartphone attached to the waist of the subject to provide information about tilt of the torso, a personal computer running a purpose built software to process the smartphone data and provide visual biofeedback to the subject by means of a dedicated monitor and a dedicated Phantom Omni(®) device for haptic biofeedback. For experimental verification of the system, eleven healthy young participants performed balance tasks assuming two distinct postures for 30 s each while acquiring torso tilt. The postures used were the one foot stance and the tandem Romberg stance. For both the postures, the subjects stood on a foam platform which provided a certain amount of ground instability. Post-experiment data analysis was performed using MATLAB(®) to analyze reduction in body sway. Analysis parameters based on the projection of trunk tilt information were calculated in order to ascertain the reduction in body sway and improvements in postural control. Two-way analysis of variance (ANOVA) showed no statistically significant interactions between postures and biofeedback. Post-hoc analysis revealed statistically significant reduction in body sway on provision of biofeedback. Subjects exhibited maximum body sway during no biofeedback trial, followed by either haptic or visual biofeedback and in most of the trials the multimodal biofeedback of visual and haptic together resulted in minimization of body sway, thus indicating that the multimodal biofeedback system worked well to provide significant (p biofeedback system can offer more customized training

The Design of an Interactive Data Retrieval System for Casual Users.

Science.gov (United States)

Radhakrishnan, T.; And Others

1982-01-01

Describes an interactive data retrieval system which was designed and implemented for casual users and which incorporates a user-friendly interface, aids to train beginners in use of the system, versatility in output, and error recovery protocols. A 14-item reference list and two figures illustrating system operation and output are included. (JL)

Design and control of multifunctional sorting and training platform based on PLC control

Science.gov (United States)

Wan, Hongqiang; Ge, Shuai; Han, Peiying; Li, Fancong; Zhang, Simiao

2018-05-01

Electromechanical integration, as a multi-disciplinary subject, has been paid much attention by universities and is widely used in the automation production of enterprises. Aiming at the problem of the lack of control among enterprises and the lack of training among colleges and universities, this paper presents a design of multifunctional sorting training platform based on PLC control. Firstly, the structure of the platform is determined and three-dimensional modeling is done. Then design the platform's aerodynamic control and electrical control. Finally, realize the platform sorting function through PLC programming and configuration software development. The training platform can be used to design the practical training experiment, which has a strong advance and pertinence in the electromechanical integration teaching. At the same time, the platform makes full use of modular thinking to make the sorting modules more flexible. Compared with the traditional training platform, its teaching effect is more significant.

Training Effectiveness Evaluation (TEE) of the Advanced Fire Fighting Training System. Focus on the Trained Person.

Science.gov (United States)

Cordell, Curtis C.; And Others

A training effectiveness evaluation of the Navy Advanced Fire Fighting Training System was conducted. This system incorporates simulated fires as well as curriculum materials and instruction. The fires are non-pollutant, computer controlled, and installed in a simulated shipboard environment. Two teams of 15 to 16 persons, with varying amounts of…

Bereavement: a postgraduate training design for psychologists

Directory of Open Access Journals (Sweden)

Maricel Peña Villamar

2015-09-01

Full Text Available Background: death is a fact that impacts the lives of all human beings, so that it can neither be ignored nor distanced from its subsequent bereavement period, even if being wished. The grief reaction is one of the problems that most frequently demand the assistance of health staff, especially psychologists in all health care areas.Objective: to devise a system of activities that contributes to increase the psychologists’ knowledge about bereavement and its management.Methods: a multiple cases study was carried out with the application of two research instruments (questionnaire and interview to those psychologists who work in primary and secondary health care in Las Tunas municipality to diagnose their needs related to the management of bereavement. Qualitative methodology was used, based on the method of participatory action research, and workshops were designed as forms of educational intervention.Results: it was proved that psychologists have insufficient theoretical and methodological training in relation to care for the bereaved. Consequently, psychotherapeutic workshops were designed, offering the general methodology and procedures to be followed by the professional who assists the bereaved.Conclusions: psychotherapeutic workshops constitute a referential theoretical and practical model very useful for the preparation of psychologists to deal with bereavement.

Coping with human errors through system design: Implications for ecological interface design

DEFF Research Database (Denmark)

Rasmussen, Jens; Vicente, Kim J.

1989-01-01

Research during recent years has revealed that human errors are not stochastic events which can be removed through improved training programs or optimal interface design. Rather, errors tend to reflect either systematic interference between various models, rules, and schemata, or the effects...... of the adaptive mechanisms involved in learning. In terms of design implications, these findings suggest that reliable human-system interaction will be achieved by designing interfaces which tend to minimize the potential for control interference and support recovery from errors. In other words, the focus should...... be on control of the effects of errors rather than on the elimination of errors per se. In this paper, we propose a theoretical framework for interface design that attempts to satisfy these objectives. The goal of our framework, called ecological interface design, is to develop a meaningful representation...

Using innovative instructional technology to meet training needs in public health: a design process.

Science.gov (United States)

Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

2014-03-01

Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

How to Deal with Revolutions in Train Control Systems

Directory of Open Access Journals (Sweden)

Hideo Nakamura

2016-09-01

Full Text Available Train control systems ensure the safety of railways. This paper begins with a summary of the typical train control systems in Japan and Europe. Based on this summary, the author then raises the following question regarding current train control systems: What approach should be adopted in order to enhance the functionality, safety, and reliability of train control systems and assist in commercial operations on railways? Next, the author provides a desirable architecture that is likely to assist with the development of new train control systems based on current information and communication technologies. A new unified train control system (UTCS is proposed that is effective in enhancing the robustness and competitiveness of a train control system. The ultimate architecture of the UTCS will be only composed of essential elements such as point machines and level crossing control devices in the field. Finally, a processing method of the UTCS is discussed.

Interaction and educational design of mobile equipment for crisis management training

DEFF Research Database (Denmark)

Ørngreen, Rikke

2011-01-01

As researchers and designers of crisis management training in mobile learning settings, we need to consider ways in which principles of educational design and interaction design can co-exist, in order to reach a higher quality of the analysis and design process. The paper is an input...

Design of training centres for nuclear power plants. Working material. Proceedings of a specialists' meeting

International Nuclear Information System (INIS)

1996-01-01

The purpose of this meeting was to provide an international forum for presentation and discussion of experiences in the design and operation of training centres for nuclear power plant personnel. The term ''training centre'', as used during this meeting, includes both those facilities that are dedicated to provide training for an individual nuclear power plants, and that are often located near that plant, as well as facilities that provide training for multiple NPPs, and which are operated by vendors or by utility organizations that are not directly controlled by the NPP organizations which they serve. The topic, ''design of training centres'' was used in its broadest sense to include not only facilities (such as classrooms, laboratories and simulators), but also design of: training organizations; training programmes and materials; and examination/evaluation methods. Refs, figs, tabs

Design of training centres for nuclear power plants. Working material. Proceedings of a specialists` meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

The purpose of this meeting was to provide an international forum for presentation and discussion of experiences in the design and operation of training centres for nuclear power plant personnel. The term ``training centre``, as used during this meeting, includes both those facilities that are dedicated to provide training for an individual nuclear power plants, and that are often located near that plant, as well as facilities that provide training for multiple NPPs, and which are operated by vendors or by utility organizations that are not directly controlled by the NPP organizations which they serve. The topic, ``design of training centres`` was used in its broadest sense to include not only facilities (such as classrooms, laboratories and simulators), but also design of: training organizations; training programmes and materials; and examination/evaluation methods. Refs, figs, tabs.

Purpose and benefit of control system training for operators

International Nuclear Information System (INIS)

Zimoch, E.; Luedeke, A.

2012-01-01

The complexity of accelerators is ever increasing and today it is typical that a large number of feedback loops are implemented, based on sophisticated models which describe the underlying physics. Despite this increased complexity the machine operators must still effectively monitor and supervise the desired behavior of the accelerator. This is not alone sufficient; additionally, the correct operation of the control system must also be verified. This is not always easy since the structure, design, and performance of the control system is usually not visualized and is often hidden to the operator. To better deal with this situation operators need some knowledge of the control system in order to react properly in the case of problems. In fact operators need mental models of the control system to recognize fault states and react appropriate to errors and misbehavior of both, the accelerator and the control system itself. Mental models gained only on infrequent experience can be imprecise or plain wrong in worst case. Control system training can provide a foundation to build better mental models and therefore help to enhance operator responses and machine availability. For a refinement of the mental model repeated experience is needed. This can be provided by training sessions at the real accelerator

National training course on radiation safety, Its insertion in the cuban system of education and training

International Nuclear Information System (INIS)

Cornejo Diaz, Netor; Hernadez Saiz, Alejandro; Calli Fernadez, Ernesto; Perez Reyes, Yolanda

2005-01-01

The Center for Radiation Protection and Hygiene has been organizing, since more than ten years, the national training course on Radiation Safety, taking into account the particular needs of the Country in this area. The curriculum of the course, after some years of improvements, is showed and some aspects related to its design and insertion in the national system of education and training in Radiation Safety are discussed. The maintenance of an updated database of participants has demonstrated to be a very useful tool for dissemination of knowledge in Radiation Safety and for a continuously improvement of the imparted courses and offered services. The importance of the participation of the Regulatory Authority in the Course, from its organization phase, is also stressed

Knowledge society training system

International Nuclear Information System (INIS)

Ceclan, Mihail; Ionescu, Tudor Basarab; Ceclan, Rodica Elena; Tatar, Florin; Tiron, Cristian; Georgescu, Luisa Maria

2005-01-01

The paper aims to present the results of the Cernavoda NPP Training Department modernization project. In order to achieve a knowledge society training system, in the first stage of the project a Computer Based Training (CBT) or E-Learning software platform and several CBT objects/courses have been implemented. The conceived solution is called CBTCenter which is a complete E-Learning and CBT system, offering a variety of teaching and learning tools and services to its users. CBT and/or E-Learning always mean two things: a software platform and content authoring. Ideally, a software platform should be able to import any type of flat documentation and integrate it into a structured database which keeps track of pedagogically meaningful information like the student's progress in studying materials, tests and quizzes, grades, etc. At the same time, the materials, the study and the tests have to be organized around certain objectives which play the role of guidelines during the entire educational activity. An example of such a course which has been successfully integrated into CBTCenter is Labour safety - code name BB-001. The implementation of the CBT technology at NPP Cernavoda Training Department has brought several advantages: the technology improves overall communication between all individuals which take part in the educational process; the classroom space problem has been considerably reduced; students can access training materials from their own desk using the NPP intranet; the logistics problems will decrease with the conversion of more and more conventional courses and materials into CBT objects/courses. (authors)

Driverless Train

OpenAIRE

Törnqvist, Julia; Berglund, Emma

2017-01-01

As automation increases in train services, this project resulted in making a driver-less train. The main purpose was to see how security can be increased. By using sensors, today’s technologies and rebuild the stations with walls on the platforms, the safety can increase for the better. This project designs a railway system consisting of a train, boom barriers and a station. The mechanical parts were made from scratch to get the system to work beneficially. The use of Arduino as a micro contro...

Study on training of nuclear power system operators

International Nuclear Information System (INIS)

Guo Lifeng; Zhou Gang; Yu Lei

2012-01-01

In order to satisfy new requirements about operators of nuclear power system, which are brought up by development and changes of social environment, science and technology, we do research on and make analysis of the problem of operator training. This paper focuses on development and changes of operator training system and content, mentality training, application of new technology to training, feedback of experience and so on. Analysis showed that the content of operator training is also confronted with some new requirements. So we bring up the new requirements to the operator, such as mentality training, cognizance ability training, adaptability training of special environment and endurance training. Besides, it is important for perfecting operator cultivation mechanism and improving training effect to feed back experience and apply new technology. So the trainer must improve training content and cultivation mechanism continuously. (authors)

Opportunistic beam training with hybrid analog/digital codebooks for mmWave systems

KAUST Repository

Eltayeb, Mohammed E.

2016-02-25

© 2015 IEEE. Millimeter wave (mmWave) communication is one solution to provide more spectrum than available at lower carrier frequencies. To provide sufficient link budget, mmWave systems will use beamforming with large antenna arrays at both the transmitter and receiver. Training these large arrays using conventional approaches taken at lower carrier frequencies, however, results in high overhead. In this paper, we propose a beam training algorithm that efficiently designs the beamforming vectors with low training overhead. Exploiting mmWave channel reciprocity, the proposed algorithm relaxes the need for an explicit feedback channel, and opportunistically terminates the training process when a desired quality of service is achieved. To construct the training beamforming vectors, a new multi-resolution codebook is developed for hybrid analog/digital architectures. Simulation results show that the proposed algorithm achieves a comparable rate to that obtained by exhaustive search solutions while requiring lower training overhead when compared to prior work.

Opportunistic beam training with hybrid analog/digital codebooks for mmWave systems

KAUST Repository

Eltayeb, Mohammed E.; Alkhateeb, Ahmed; Heath, Robert W.; Al-Naffouri, Tareq Y.

2016-01-01

© 2015 IEEE. Millimeter wave (mmWave) communication is one solution to provide more spectrum than available at lower carrier frequencies. To provide sufficient link budget, mmWave systems will use beamforming with large antenna arrays at both the transmitter and receiver. Training these large arrays using conventional approaches taken at lower carrier frequencies, however, results in high overhead. In this paper, we propose a beam training algorithm that efficiently designs the beamforming vectors with low training overhead. Exploiting mmWave channel reciprocity, the proposed algorithm relaxes the need for an explicit feedback channel, and opportunistically terminates the training process when a desired quality of service is achieved. To construct the training beamforming vectors, a new multi-resolution codebook is developed for hybrid analog/digital architectures. Simulation results show that the proposed algorithm achieves a comparable rate to that obtained by exhaustive search solutions while requiring lower training overhead when compared to prior work.

Innovative Design of Cam-Controlled Planetary Gear Trains

Directory of Open Access Journals (Sweden)

Wen-Hsiang Hsieh

2011-10-01

Full Text Available The objective of this paper is to perform the innovation design for the new structures of cam-controlled planetary gear trains (CCPGTs, based on the creative mechanism design methodology. Firstly, the design requirements and design constraints are summarized according to the kinematics characteristics of existing CCPGTs. Then, the (4, 5 and (5, 7 graphs are generated by the theory of number synthesis. After that, the atlas of feasible specialized graphs is obtained. Finally, the atlas of new designs is obtained through the particularization process. In addition, an illustrated example is given, and the feasibility of the design is verified by computer simulation using ADAMS software. The result indicates that new design can produce a more wide range of non-uniform motion than the existing design. Therefore, they are better alternatives for driving a variable speed input mechanism.

Smart rehabilitation garment design for arm-hand training

NARCIS (Netherlands)

Wang, Q.; Markopoulos, P.; Chen, Wei

2014-01-01

This paper describes the design of a smart rehabilitation garment (SRG) to support posture correction during rehabilitation training. The garment is equipped with accelerometers in various positions and is controlled by an Arduino processor. It connects with Bluetooth to a smartphone or a personal

Dependability analysis of the data communication system in train control system

Institute of Scientific and Technical Information of China (English)

无

2009-01-01

Communication based train control (CBTC) system is based on mobile communication and overcomes fixed blocks in order to increase track utilization and train safety. The data communication system (DCS) between trains and wayside equipment is a crucial factor for the safe and efficient operation of CBTC system. The dependability under various transmission conditions needs to be modeled and evaluated. In this paper,a stochastic reward net (SRN) model for DCS based IEEE 802.11 standard was developed,which captures all relevant failure and failure recovery behavior system aspects in a concise way. We compared the reliability,availability for DCS with and without access point (AP) and antenna redundant configuration. We also quantitatively evaluated and compared the frame loss probability for three DCS configurations with different train velocities and train numbers in one radio cell. Fixed-point iteration was adopted to simplify the analysis. Numerical results showed the significant improvement of the reliability,availability and the frame loss probability index for the full redundant configuration.

Simulation-based design process for the verification of ITER remote handling systems

International Nuclear Information System (INIS)

Sibois, Romain; Määttä, Timo; Siuko, Mikko; Mattila, Jouni

2014-01-01

Highlights: •Verification and validation process for ITER remote handling system. •Simulation-based design process for early verification of ITER RH systems. •Design process centralized around simulation lifecycle management system. •Verification and validation roadmap for digital modelling phase. -- Abstract: The work behind this paper takes place in the EFDA's European Goal Oriented Training programme on Remote Handling (RH) “GOT-RH”. The programme aims to train engineers for activities supporting the ITER project and the long-term fusion programme. One of the projects of this programme focuses on the verification and validation (V and V) of ITER RH system requirements using digital mock-ups (DMU). The purpose of this project is to study and develop efficient approach of using DMUs in the V and V process of ITER RH system design utilizing a System Engineering (SE) framework. Complex engineering systems such as ITER facilities lead to substantial rise of cost while manufacturing the full-scale prototype. In the V and V process for ITER RH equipment, physical tests are a requirement to ensure the compliance of the system according to the required operation. Therefore it is essential to virtually verify the developed system before starting the prototype manufacturing phase. This paper gives an overview of the current trends in using digital mock-up within product design processes. It suggests a simulation-based process design centralized around a simulation lifecycle management system. The purpose of this paper is to describe possible improvements in the formalization of the ITER RH design process and V and V processes, in order to increase their cost efficiency and reliability

Design optimization on the drive train of a light-weight robotic arm

DEFF Research Database (Denmark)

Zhou, Lelai; Bai, Shaoping; Hansen, Michael Rygaard

2011-01-01

A drive train optimization method for design of light-weight robots is proposed. Optimal selections of motors and gearboxes from a limited catalog of commercially available components are done simultaneously for all joints of a robotic arm. Characteristics of the motor and gearbox, including gear...... ratio, gear inertia, motor inertia, and gear efficiency, are considered in the drive train modeling. A co-simulation method is developed for dynamic simulation of the arm. A design example is included to demonstrate the proposed design optimization method....

Automated design of complex dynamic systems.

Directory of Open Access Journals (Sweden)

Michiel Hermans

Full Text Available Several fields of study are concerned with uniting the concept of computation with that of the design of physical systems. For example, a recent trend in robotics is to design robots in such a way that they require a minimal control effort. Another example is found in the domain of photonics, where recent efforts try to benefit directly from the complex nonlinear dynamics to achieve more efficient signal processing. The underlying goal of these and similar research efforts is to internalize a large part of the necessary computations within the physical system itself by exploiting its inherent non-linear dynamics. This, however, often requires the optimization of large numbers of system parameters, related to both the system's structure as well as its material properties. In addition, many of these parameters are subject to fabrication variability or to variations through time. In this paper we apply a machine learning algorithm to optimize physical dynamic systems. We show that such algorithms, which are normally applied on abstract computational entities, can be extended to the field of differential equations and used to optimize an associated set of parameters which determine their behavior. We show that machine learning training methodologies are highly useful in designing robust systems, and we provide a set of both simple and complex examples using models of physical dynamical systems. Interestingly, the derived optimization method is intimately related to direct collocation a method known in the field of optimal control. Our work suggests that the application domains of both machine learning and optimal control have a largely unexplored overlapping area which envelopes a novel design methodology of smart and highly complex physical systems.

Development of plant status display system for on-site educational training system

International Nuclear Information System (INIS)

Yoshimura, Seiichi; Fujimoto, Junzo; Okamoto, Hisatake; Tsunoda, Ryohei; Watanabe, Takao; Masuko, Jiro.

1986-01-01

The purpose of this system is to make easy the comprehension of the facility and dynamics of nuclear power plants. This report describes the tendency and future position of how the educational training system should be, and furthermore describes the experiment. Main results are as follows. 1. The present status and the future tendency of educational training system for nuclear power plant operators. CAI (Computer Assisted Instruction) system has following characteristics. (1) It is easy to introduce plant specific characteristics to the educational training. (2) It is easy to execute the detailed training for the compensation of the full-scale simulator. 2. Plant status display system for on-site educational training system. The fundamental function of the system is as follows. (1) It has 2 CRT displays and voice output devices. (2) It has easy manupulation type of man-machine interface. (3) It has the function for the evaluation of the training results. 3. The effectiveness of this system. The effectiveness evaluation test has been carried out by using this system actually. (1) This system has been proved to be essentially effective and some improvements for the future utilization has been pointed out. (2) It should be faster when the CRT displayes are changed, and it should have the explanation function when the plant transients are displayed. (author)

Design and Training of Limited-Interconnect Architectures

Science.gov (United States)

1991-07-16

and signal processing. Neuromorphic (brain like) models, allow an alternative for achieving real-time operation tor such tasks, while having a...compact and robust architecture. Neuromorphic models consist of interconnections of simple computational nodes. In this approach, each node computes a...operational performance. I1. Research Objectives The research objectives were: 1. Development of on- chip local training rules specifically designed for

Development of a Wearable Cardiac Monitoring System for Behavioral Neurocardiac Training: A Usability Study.

Science.gov (United States)

Uddin, Akib A; Morita, Plinio P; Tallevi, Kevin; Armour, Kevin; Li, John; Nolan, Robert P; Cafazzo, Joseph A

2016-04-22

Elevated blood pressure is one of the main risk factors for death globally. Behavioral neurocardiac training (BNT) is a complementary approach to blood pressure and stress management that is intended to exercise the autonomic reflexes, improve stress recovery, and lower blood pressure. BNT involves cognitive-behavioral therapy with a paced breathing technique and heart rate variability biofeedback. BNT is limited to in-clinic delivery and faces an accessibility barrier because of the need for clinical oversight and the use of complex monitoring tools. The objective of this project was to design, develop, and evaluate a wearable electrocardiographic (ECG) sensor system for the delivery of BNT in a home setting. The wearable sensor system, Beat, consists of an ECG sensor and a mobile app. It was developed iteratively using the principles of test-driven Agile development and user-centered design. A usability study was conducted at Toronto General Hospital to evaluate feasibility and user experience and identify areas of improvement. The Beat sensor was designed as a modular patch to be worn on the user's chest and uses standard ECG electrodes. It streams a single-lead ECG wirelessly to a mobile phone using Bluetooth Low Energy. The use of small, low-power electronics, a low device profile, and a tapered enclosure allowed for a device that can be unobtrusively worn under clothing. The sensor was designed to operate with a mobile app that guides users through the BNT exercises to train them to a slow-paced breathing technique for stress recovery. The BNT app uses the ECG captured by the sensor to provide heart rate variability biofeedback in the form of a real-time heart rate waveform to complement and reinforce the impact of the training. Usability testing (n=6) indicated that the overall response to the design and user experience of the system was perceived positively. All participants indicated that the system had a positive effect on stress management and that they

Instructional psychology and the design of training simulators

International Nuclear Information System (INIS)

Stammers, R.B.

1985-01-01

In this paper the role of instructional psychology in simulator design and use is discussed. It is suggested that research and development work has tended to focus upon the face validity of simulators rather than their instructional utility. Dimensions of simulation are reviewed as are the variety of uses to which a simulator may be put. The nature of instructional psychology is briefly described under the following headings: task analysis, the acquisition of knowledge and skill and theories of instruction. Attention is also given to the potential role of computer-based training and the topic of retention of training is introduced. (author)

Bilingual Skills Training Program. Barbering/Cosmetology. Module 7.0: Endocrine System.

Science.gov (United States)

Northern New Mexico Community Coll., El Rito.

This module on the endocrine system is the seventh of ten (CE 028 308-318) in the barbering/cosmetology course of a bilingual skills training program. (A Vocabulary Development Workbook for modules 6-10 is available as CE 028 313.) The course is designed to furnish theoretical and laboratory epxerience. Module objectives are for students to…

Bilingual Skills Training Program. Barbering/Cosmetology. Module 4.0: Skeletal System.

Science.gov (United States)

Northern New Mexico Community Coll., El Rito.

This module on the skeletal system is the fourth of ten (CE 028 308-318) in the barbering/cosmetology course of a bilingual skill training program. (A Vocabulary Development Workbook for modules 6-10 is available as CE 028 313.) The course is designed to furnish theoretical and laboratory experience. Module objectives are for students to develop…

Bilingual Skills Training Program. Barbering/Cosmetology. Module 6.0: Muscular System.

Science.gov (United States)

Northern New Mexico Community Coll., El Rito.

This module on the muscular system is the sixth of ten (CE 028 308-318) in the barbering/cosmetology course of a bilingual skills training program. (A Vocabulary Development Workbook for modules 6-10 is available as CE 028 313.) The course is designed to furnish theoretical and laboratory experience. Module objectives are for students to develop…

Training Requirements and Information Management System

Energy Technology Data Exchange (ETDEWEB)

Cillan, T.F.; Hodgson, M.A.

1992-05-01

This is the software user's guide for the Training Requirements and Information Management System. This guide defines and describes the software operating procedures as they apply to the end user of the software program. This guide is intended as a reference tool for the user who already has an indepth knowledge of the Training Requirements and Information Management System functions and data reporting requirement.

An augmented reality home-training system based on the mirror training and imagery approach.

Science.gov (United States)

Trojan, Jörg; Diers, Martin; Fuchs, Xaver; Bach, Felix; Bekrater-Bodmann, Robin; Foell, Jens; Kamping, Sandra; Rance, Mariela; Maaß, Heiko; Flor, Herta

2014-09-01

Mirror training and movement imagery have been demonstrated to be effective in treating several clinical conditions, such as phantom limb pain, stroke-induced hemiparesis, and complex regional pain syndrome. This article presents an augmented reality home-training system based on the mirror and imagery treatment approaches for hand training. A head-mounted display equipped with cameras captures one hand held in front of the body, mirrors this hand, and displays it in real time in a set of four different training tasks: (1) flexing fingers in a predefined sequence, (2) moving the hand into a posture fitting into a silhouette template, (3) driving a "Snake" video game with the index finger, and (4) grasping and moving a virtual ball. The system records task performance and transfers these data to a central server via the Internet, allowing monitoring of training progress. We evaluated the system by having 7 healthy participants train with it over the course of ten sessions of 15-min duration. No technical problems emerged during this time. Performance indicators showed that the system achieves a good balance between relatively easy and more challenging tasks and that participants improved significantly over the training sessions. This suggests that the system is well suited to maintain motivation in patients, especially when it is used for a prolonged period of time.

Development of the operator training system using computer graphics. Pt. 1. Defining the system configuration and developing basic techniques

International Nuclear Information System (INIS)

Takana, Kenchi; Sasou, Kunihide; Sano, Toshiaki; Suzuki, Koichi; Noji, Kunio

2001-01-01

Efficient and concurrent operator training seems to be crucial in near future because of an increase in operators to be trained due to generation alternations. Ever developed Man -Machine-Simulator (MMS) has several merits: (1) Operators' cognitive and behavioral activities among team in emergency could be simulated based on the concurrent mental model; (2) Simulated scenarios could be expanded to multiple malfunctions events, to all of which procedures could not be stipulated previously, (3) Standard behavior in coping with anomalies including communication and operations could be presented. This paper describes the development of an operator training system by applying this MMS. Three dimensional computer graphics (3D-CG) was adopted for improving the training effects and attracting operators' interest by visually presenting realistic operating team behavior in the main control room. Towards the completion of the operator training system, following designs of system configuration and developments of several basic techniques were availed: (1) Imaging the utilization of the operator training system, functions to be equipped and system configurations for realizing functions were determined. And three of scenarios were chosen in order to appeal the merits of the MMS and to raise training effects. (2) Knowledge base was completed to execute simulations. And connection between operator team model and plant simulator, that is the 2nd generation type simulator of the BTC -4, was executed to obtain simulation results (time sequential log data of plant dynamics and operating team behavior). (3) Operator's actions seen in VCR tapes in real training were classified for eighteen kinds of fundamental categories and those fundamental actions were modeled on 3D-CG using the People Shop software. The 3D-CG of main control panel was prepared using Multi Gen software. (author)

An experimental study on passive safety systems for the SMART design with the SMART-ITL facility

International Nuclear Information System (INIS)

Park, Hyun-Sik; Bae, Hwang; Ryu, Sung-Uk; Jeon, Byong-Guk; Yang, Jin-Hwa; Yi, Sung-Jae

2016-01-01

Passive Safety Systems (PSSs) are added to the SMART design to increase the safety margin during accidents especially under a prolonged station blackout. A set of validation tests were performed for the PSSs of the SMART design with an integral effect test loop of SMART-ITL. Both single and dual trains of the Passive Safety Injection System (PSIS) were simulated to validate the SMART design together with two stages of Automatic Depressurization System (ADS) and four trains of Passive Residual Heat Removal System (PRHRS), and their results were compared. In this paper, the effect of the train number of PSIS on a Small-Break Loss of Coolant Accident (SBLOCA) scenario is investigated for a break size of 0.4 inch. The single and dual train tests show a similar trend in general but the injected water migrates slightly differently in the RV and is discharged through the break nozzle. The parameters of the Reactor Vessel (RV) pressure, RV water level, accumulated break mass, and injection flowrates from the Core Makeup Tank (CMT) and Safety Injection Tank (SIT) were compared. The acquired data will be used to validate the safety analysis code and its related models to evaluate the performance of SMART PSS, and to provide the base data during the application phase of construction licensing of the SMART design. (author)

The Effects of Behavioral Skills Training on Implementation of the Picture Exchange Communication System

Science.gov (United States)

Rosales, Rocio; Stone, Karen; Rehfeldt, Ruth Anne

2009-01-01

The effectiveness of a behavioral skills training (BST) package to teach the implementation of the first three phases of the picture exchange communication system (PECS) was evaluated with 3 adults who had no history teaching any functional communication system. A multiple baseline design across participants was used to evaluate the effectiveness…

Promoting safety mindfulness: Recommendations for the design and use of simulation-based training in radiation therapy

Directory of Open Access Journals (Sweden)

Lukasz M. Mazur, PhD

2018-04-01

Full Text Available There is a need to better prepare radiation therapy (RT providers to safely operate within the health information technology (IT sociotechnical system. Simulation-based training has been preemptively used to yield meaningful improvements during providers' interactions with health IT, including RT settings. Therefore, on the basis of the available literature and our experience, we propose principles for the effective design and use of simulated scenarios and describe a conceptual framework for a debriefing approach to foster successful training that is focused on safety mindfulness during RT professionals' interactions with health IT.

Exploring the bases for a mixed reality stroke rehabilitation system, Part II: design of interactive feedback for upper limb rehabilitation.

Science.gov (United States)

Lehrer, Nicole; Chen, Yinpeng; Duff, Margaret; L Wolf, Steven; Rikakis, Thanassis

2011-09-08

Few existing interactive rehabilitation systems can effectively communicate multiple aspects of movement performance simultaneously, in a manner that appropriately adapts across various training scenarios. In order to address the need for such systems within stroke rehabilitation training, a unified approach for designing interactive systems for upper limb rehabilitation of stroke survivors has been developed and applied for the implementation of an Adaptive Mixed Reality Rehabilitation (AMRR) System. The AMRR system provides computational evaluation and multimedia feedback for the upper limb rehabilitation of stroke survivors. A participant's movements are tracked by motion capture technology and evaluated by computational means. The resulting data are used to generate interactive media-based feedback that communicates to the participant detailed, intuitive evaluations of his performance. This article describes how the AMRR system's interactive feedback is designed to address specific movement challenges faced by stroke survivors. Multimedia examples are provided to illustrate each feedback component. Supportive data are provided for three participants of varying impairment levels to demonstrate the system's ability to train both targeted and integrated aspects of movement. The AMRR system supports training of multiple movement aspects together or in isolation, within adaptable sequences, through cohesive feedback that is based on formalized compositional design principles. From preliminary analysis of the data, we infer that the system's ability to train multiple foci together or in isolation in adaptable sequences, utilizing appropriately designed feedback, can lead to functional improvement. The evaluation and feedback frameworks established within the AMRR system will be applied to the development of a novel home-based system to provide an engaging yet low-cost extension of training for longer periods of time.

Alternative Design Study Report: WindPACT Advanced Wind Turbine Drive Train Designs Study; November 1, 2000 -- February 28, 2002

Energy Technology Data Exchange (ETDEWEB)

Poore, R.; Lettenmaier, T.

2003-08-01

This report presents the Phase I results of the National Renewable Energy Laboratory's (NREL's) WindPACT (Wind Partnership for Advanced Component Technologies) Advanced Wind Turbine Drive Train Designs Study. Global Energy Concepts, LLC performed this work under a subcontract with NREL. The purpose of the WindPACT project is to identify technology improvements that will enable the cost of energy (COE) from wind turbines to be reduced. Other parts of the WindPACT project have examined blade and logistics scaling, balance-of-station costs, and rotor design. This study was designed to investigate innovative drive train designs.

Team Training through Communications Control

Science.gov (United States)

1982-02-01

training * operational environment * team training research issues * training approach * team communications * models of operator beharior e...on the market soon, it certainly would be investigated carefully for its applicability to the team training problem. ce A text-to-speech voice...generation system. Votrax has recently marketed such a device, and others may soon follow suit. ’ d. A speech replay system designed to produce speech from

The application of MVC design pattern in Daya bay reactor neutrino experiments online safety training system

International Nuclear Information System (INIS)

Liu Guanchuan; Chu Yuanping

2011-01-01

The article made an introduction to MVC, which is an architectural pattern used in software engineering. It specified the advantages and disadvantages of MVC and also the application of MVC in Daya Bay nuclear reactor neutrino experiment online safety training system. (authors)

An engineering design approach to systems biology.

Science.gov (United States)

Janes, Kevin A; Chandran, Preethi L; Ford, Roseanne M; Lazzara, Matthew J; Papin, Jason A; Peirce, Shayn M; Saucerman, Jeffrey J; Lauffenburger, Douglas A

2017-07-17

Measuring and modeling the integrated behavior of biomolecular-cellular networks is central to systems biology. Over several decades, systems biology has been shaped by quantitative biologists, physicists, mathematicians, and engineers in different ways. However, the basic and applied versions of systems biology are not typically distinguished, which blurs the separate aspirations of the field and its potential for real-world impact. Here, we articulate an engineering approach to systems biology, which applies educational philosophy, engineering design, and predictive models to solve contemporary problems in an age of biomedical Big Data. A concerted effort to train systems bioengineers will provide a versatile workforce capable of tackling the diverse challenges faced by the biotechnological and pharmaceutical sectors in a modern, information-dense economy.

Effect of postgraduate training on job and career satisfaction among health-system pharmacists.

Science.gov (United States)

Padiyara, Rosalyn S; Komperda, Kathy E

2010-07-01

The effect of postgraduate training on job and career satisfaction among health-system pharmacists was evaluated. A mail-based questionnaire was sent to a random sample of pharmacist members of the American Society of Health-System Pharmacists. Previously validated questions for job and career satisfaction among pharmacists were utilized. The questionnaire was designed to obtain information regarding general employment, work environment, job satisfaction, career satisfaction, postgraduate training, and demographic characteristics. Pharmacists who had completed either a pharmacy residency or fellowship were classified as having postgraduate training. Questionnaires returned within two months of the original mailing date were included in the analysis. Responses from pharmacists who were retired, employed in a nonpharmacy career, or unemployed were excluded. Data were analyzed using SPSS software. Of the 2499 questionnaires mailed, 36 were undeliverable; 1058 were completed, yielding a response rate of 43%. Of these, 48 were excluded, resulting in 1010 questionnaires suitable for analysis. Approximately 37% of respondents indicated completion of postgraduate training. The most common practice setting was a community, not-for-profit hospital (40.9%). Overall, 90.7% of respondents indicated they were either satisfied or highly satisfied with their current employment. Approximately 45% of pharmacists with postgraduate training indicated they were highly satisfied with their employment, compared with 32.7% of pharmacists without postgraduate training (p training were more satisfied with their job than those who did not complete such training.

Computerized system controls Canadian training facility

International Nuclear Information System (INIS)

Dingwall, K.

1996-01-01

The Petroleum Industry Training Service (PITS), a non-profit organization headquartered in Calgary, Alberta, Canada, has earned a reputation as the most sophisticated training organization of its kind. Backed by such resources as the $25-million Nisku Training Center, located on a 38-acre site near Edmonton, PITS provides present and future petroleum engineers/operators/administrators with on-the-job experience in every facet of oil/gas processing. Nearly 3,000 students attend the Nisku training facility each year. Courses range in length from one day to six months, on topics as diverse as petroleum engineering, field production, drilling and well service, safety, environmental impact and management. Designed to teach skills needed at all levels, the courses fulfill an important educational need for firms with both new hires and seasoned personnel. PITS certificates are well-recognized by industry and government agencies

Proposal of a system of indicators to assess the training of experts in a high-tech organization

International Nuclear Information System (INIS)

Elías Hardy, Lidia Lauren; González Olaguive, Elizabeth Vicenta; Martínez Martínez, Elisa

2015-01-01

Objective: present a proposal of a system of indicators to assess actions aimed at the training and development of experts in a high-tech organization. Methods: an analysis was conducted of the various theories dealing with the training and development of experts, examining their features and components. Design of the system of indicators was based on surveys and direct observation. The system of indicators thus designed was validated with the Delphi method, the application of the Likert scale and the statistical treatment of answers provided by experts, using median and interquartile range values to establish the consensus of experts. Results: a working definition is proposed of the concept expert based on two dimensions: qualification and performance, and individual and collective variables, indicators and measurement criteria. Cronbach's alpha coefficient (0,8655) showed the internal consistency of the tool used. The median and interquartile range values obtained made it possible to establish the consensus of participants in the validation of the system of indicators. Conclusions: the system of indicators developed and its two dimensions make it possible to assess the training and development of experts at the Cuban Neuroscience Center, as well as the system of actions performed. The indicator showing the lowest results is that of productivity of experts in the training of human resources of high academic level. (author)

Toward improved software security training using a cyber warfare opposing force (CW OPFOR): the knowledge base design

Science.gov (United States)

Stytz, Martin R.; Banks, Sheila B.

2005-03-01

"Train the way you will fight" has been a guiding principle for military training and has served the warfighter well as evidenced by numerous successful operations over the last decade. This need for realistic training for all combatants has been recognized and proven by the warfighter and continues to guide military training. However, to date, this key training principle has not been applied fully in the arena of cyberwarfare due to the lack of realistic, cost effective, reasonable, and formidable cyberwarfare opponents. Recent technological advances, improvements in the capability of computer-generated forces (CGFs) to emulate human behavior, and current results in research in information assurance and software protection, coupled with increasing dependence upon information superiority, indicate that the cyberbattlespace will be a key aspect of future conflict and that it is time to address the cyberwarfare training shortfall. To address the need for a cyberwarfare training and defensive testing capability, we propose research and development to yield a prototype computerized, semi-autonomous (SAF) red team capability. We term this capability the Cyber Warfare Opposing Force (CW OPFOR). There are several technologies that are now mature enough to enable, for the first time, the development of this powerful, effective, high fidelity CW OPFOR. These include improved knowledge about cyberwarfare attack and defense, improved techniques for assembling CGFs, improved techniques for capturing and expressing knowledge, software technologies that permit effective rapid prototyping to be effectively used on large projects, and the capability for effective hybrid reasoning systems. Our development approach for the CW OPFOR lays out several phases in order to address these requirements in an orderly manner and to enable us to test the capabilities of the CW OPFOR and exploit them as they are developed. We have completed the first phase of the research project, which

RELAP/SCDAPSIM Reactor System Simulator Development and Training for University and Reactor Applications

International Nuclear Information System (INIS)

Hohorst, J.K.; Allison, C.M.

2010-01-01

The RELAP/SCDAPSIM code, designed to predict the behaviour of reactor systems during normal and accident conditions, is being developed as part of an international nuclear technology development program called SDTP (SCDAP Development and Training Program). SDTP involves more than 60 organizations in 28 countries. One of the important applications of the code is for simulator training of university faculty and students, reactor analysts, and reactor operations and technical support staff. Examples of RELAP/SCDAPSIM-based system thermal hydraulic and severe accident simulator packages include the SAFSIM simulator developed by NECSA for the SAFARI research reactor in South Africa, university-developed simulators at the University of Mexico and Shanghai Jiao Tong University in China, and commercial VISA and RELSIM packages used for analyst and reactor operations staff training. This paper will briefly describe the different packages/facilities. (authors)

RELAP/SCDAPSIM Reactor System Simulator Development and Training for University and Reactor Applications

Energy Technology Data Exchange (ETDEWEB)

Hohorst, J.K.; Allison, C.M. [Innovative Systems Software, 1242 South Woodruff Avenue, Idaho Falls, Idaho 83404 (United States)

2010-07-01

The RELAP/SCDAPSIM code, designed to predict the behaviour of reactor systems during normal and accident conditions, is being developed as part of an international nuclear technology development program called SDTP (SCDAP Development and Training Program). SDTP involves more than 60 organizations in 28 countries. One of the important applications of the code is for simulator training of university faculty and students, reactor analysts, and reactor operations and technical support staff. Examples of RELAP/SCDAPSIM-based system thermal hydraulic and severe accident simulator packages include the SAFSIM simulator developed by NECSA for the SAFARI research reactor in South Africa, university-developed simulators at the University of Mexico and Shanghai Jiao Tong University in China, and commercial VISA and RELSIM packages used for analyst and reactor operations staff training. This paper will briefly describe the different packages/facilities. (authors)

Murjottelu-Interdisciplinary Training Campaign for Industrial Design and Engineering Students

Science.gov (United States)

Itkonen, Maija; Ekman, Kalevi Edvard; Kojo, Inka

2009-01-01

Today's growing business competition demands that design and technology must be seamlessly integrated. Designers should be employed increasingly as in-house in the industry, in addition to entrepreneurship and consultancy employment. How to realise this aim? Industry training is a tradition in engineering studies, but that is rarely the case in…

An EMG-driven exoskeleton hand robotic training device on chronic stroke subjects: task training system for stroke rehabilitation.

Science.gov (United States)

Ho, N S K; Tong, K Y; Hu, X L; Fung, K L; Wei, X J; Rong, W; Susanto, E A

2011-01-01

An exoskeleton hand robotic training device is specially designed for persons after stroke to provide training on their impaired hand by using an exoskeleton robotic hand which is actively driven by their own muscle signals. It detects the stroke person's intention using his/her surface electromyography (EMG) signals from the hemiplegic side and assists in hand opening or hand closing functional tasks. The robotic system is made up of an embedded controller and a robotic hand module which can be adjusted to fit for different finger length. Eight chronic stroke subjects had been recruited to evaluate the effects of this device. The preliminary results showed significant improvement in hand functions (ARAT) and upper limb functions (FMA) after 20 sessions of robot-assisted hand functions task training. With the use of this light and portable robotic device, stroke patients can now practice more easily for the opening and closing of their hands at their own will, and handle functional daily living tasks at ease. A video is included together with this paper to give a demonstration of the hand robotic system on chronic stroke subjects and it will be presented in the conference. © 2011 IEEE

Learning design for science teacher training and educational development

DEFF Research Database (Denmark)

Bjælde, Ole Eggers; Caspersen, Michael E.; Godsk, Mikkel

This paper presents the impact and perception of two initiatives at the Faculty of Science and Technology, Aarhus University: the teacher training module ‘Digital Learning Design’ (DiLD) for assistant professors and postdocs, and the STREAM learning design model and toolkit for enhancing and tran......This paper presents the impact and perception of two initiatives at the Faculty of Science and Technology, Aarhus University: the teacher training module ‘Digital Learning Design’ (DiLD) for assistant professors and postdocs, and the STREAM learning design model and toolkit for enhancing...... and transforming modules. Both DiLD and the STREAM model have proven to be effective and scalable approaches to encourage educators across all career steps to embrace the potentials of educational technology in science higher education. Moreover, the transformed modules have resulted in higher student satisfaction...

Comparison of standard (self-directed) versus intensive patient training for the human insulin inhalation powder (HIIP) delivery system in patients with type 2 diabetes: efficacy, safety, and training measures.

Science.gov (United States)

Rosenstock, Julio; Nakano, Masako; Silverman, Bernard L; Sun, Bin; de la Peña, Amparo; Suri, Ajit; Muchmore, Douglas B

2007-02-01

The Lilly/Alkermes human insulin inhalation powder (HIIP) delivery system [AIR (a registered trademark of Alkermes, Inc., Cambridge, MA) Inhaled Insulin System] was designed to be easy to use. Training methods were compared in insulin-naive patients with type 2 diabetes. Patients (n = 102) were randomized to standard or intensive training. With standard training, patients learned how to use the HIIP delivery system by reading directions for use (DFU) and trying on their own. Intensive training included orientation to the HIIP delivery system with individual coaching and inspiratory flow rate training. Both groups received preprandial HIIP + metformin with or without a thiazolidinedione for 4 weeks. Overall 2-h postprandial blood glucose (PPBG) excursion was the primary measure. Noninferiority was defined as the upper limit of the two-sided 95% confidence interval of the mean difference between groups being 1.2 training) and 0.23 +/- 0.36 (intensive training) mmol/L. The mean difference (standard minus intensive training) and two-sided 95% confidence interval were -0.35 (-1.02, 0.33) mmol/L. No statistically or clinically significant differences were observed between training methods in premeal, postmeal, or bedtime blood glucose values, HIIP doses at endpoint, or blood glucose values after a test meal. No discontinuations occurred because of difficulty of use or dislike of the HIIP system. DFU compliance was >90% in both training groups. There were no significant differences between training methods in safety measures. The HIIP delivery system is easy to use, and most patients can learn to use it by reading the DFU without assistance from health care professionals.

Design of a Control Room for Jordan Research and Training Reactor (JRTR)

Energy Technology Data Exchange (ETDEWEB)

Kim, Yong Jun; Suh, Sang Moon; Lee, Hyun Chul; Park, Je Yun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

Since the main role of JRTR(Jordan Research and Training Reactor) operating personnel is safe and reliable operation of the reactor, MCR(Main Control Room) and SCR(Supplementary Control Room) must provide them with sufficient information and controls needed to optimize their performance. Before the TMI accident, control room were generally designed just with intuitive common sense, without using any proper HFE(human factors engineering) practices. Many results derived from the analysis of TMI accident showed that a more comprehensive and systematic approaches to develop MCR design requirements were needed. Moreover changes of operators' role as a decision maker from a physical controller in rapid improvement of control system which resulted in higher automation clearly needed more featured regulatory requirements and guidelines. So many regulatory and industrial guidance for control room design have been developed by relevant institution and regulatory bodies. In this paper, a conceptual design of the JRTR control room in the effort of satisfying current regulatory requirements and guidelines are presented. And some information display design is also presented

Designing, Developing, and Implementing Diversity Training: Guidelines for Practitioners.

Science.gov (United States)

Kincaid, Tanna M.; Horner, Erin R.

1997-01-01

Discusses diversity in the workplace and offers guidelines for practitioners in designing, developing, and implementing diversity training. Highlights include linking the diversity initiative to the organization's mission, cultural climate assessments, reviewing policies and procedures, needs assessment, learner analysis, establishing objectives,…

CERN Technical Training: Signal Processor

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The "System Development and Programming with the Analog Devices’ SHARC Family" course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your que...

Man-machine interface systems and operator training program for ABWR in Japan

International Nuclear Information System (INIS)

Kunito, Susumu

2004-01-01

The Tokyo Electric Power Company (TEPCO) has developed a new Main Control Room design for the Advanced Boiling Water Reactor (ABWR) to improve man-machine interface. New configuration of panels and enhanced automation are some of the features of the ABWR type Main Control Room design. Various technologies such as Cathode Ray Tubes (CRTs) and Flat Displays (FDs) with touch-sensitive operations are contributed to the development of the ABWR type control room design. This design will be first applied to Kashiwazaki-Kariwa Nuclear Power Station unit 6 (K-6). To train the operators sufficiently, TEPCO reviewed the operator training program. Compared with the conventional training, new training menu will be added and the training of ABWR operators will be started 6 months earlier. An ABWR simulator is under construction and training using this simulator is scheduled to be started in August 1994, which is 18 months before fuel loading of K-6. We are reviewing malfunction modes on the simulator. (author)

Training system of knowledge society

International Nuclear Information System (INIS)

Ceclan, M.; Ionescu, T.B.; Ceclan, Rodica Elena; Tatar, Florin; Tiron, C.; Georgescu, Luisa Maria

2005-01-01

Full text: The paper aims at presenting the results of Cernavoda NPP Training Department modernization project. In order to achieve a training system of knowledge society in the first stage of the project a Computer Based Training (CBT) or E-Learning platform and several CBT objects/courses were worked out. The conceived E-Learning solution is called CBT Center and it is a complete system offering a variety of teaching and learning services to its users. CBT and/or E-Learning always mean two things: a software platform and content authoring. Ideally, a software platform should be able to import any type of flat documentation and integrate it into a structured database which keeps track of pedagogically meaningful information like the student's progress in studying materials, tests and quiz, marks, etc. At the same time, the materials, the study and the tests have to be organized around certain objectives which play the role of guidelines during the entire educational activity. An example of such a course which has been successfully integrated into CBT Center is the 'Thermodynamics'. CBT technology implementation at NPP Cernavoda Training Department has brought several advantages: the technology improves overall communication between all individuals which are part of the educational process; there is no space problem any more; students can access training materials from their own desk using the NPP intranet; the logistics problem will decrease, while more and more disciplines will be transformed as CBT objects. (authors)

CERN Technical Training: Digital Signal Processors

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The “System Development and Programming with the Analog Devices' SHARC Family” course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or conta...

Development and Evaluation of a Cognitive Training Game for Older People: A Design-based Approach

Science.gov (United States)

Lu, Ming-Hsin; Lin, Weijane; Yueh, Hsiu-Ping

2017-01-01

In the research field of cognitive aging, games have gained attention as training interventions to remediate age-related deficits. Cognitive training games on computer, video and mobile platforms have shown ample and positive support. However, the generalized effects are not agreed upon unanimously, and the game tasks are usually simple and decontextualized due to the limitations of measurements. This study adopted a qualitative approach of design-based research (DBR) to systematically review and pragmatically examine the regime, presentation and feedback design of a cognitive training game for older adults. An overview of the literature of cognitive aging and training games was conducted to form the theoretical conjectures of the design, and an iterative cycle and process were employed to develop a mobile game for older adults who are homebound or receiving care in a nursing home. Stakeholders, i.e., elderly users and institutional administrators, were invited to participate in the design process. Using two cycles of design and evaluation, a working prototype of an iPad-based app that accounted for the needs of elderly adults in terms of form, appearance and working function was developed and tested in the actual contexts of the participants' homes and an assisted living facility. The results showed that the cognitive training game developed in this study was accepted by the participants, and a high degree of satisfaction was noted. Moreover, the elements of the interface, including its size, layout and control flow, were tested and found to be suitable for use. This study contributes to the literature by providing design suggestions for such games, including the designs of the cognitive training structure, interface, interaction, instructions and feedback, based on empirical evidence collected in natural settings. This study further suggests that the effectiveness of cognitive training in mobile games be evaluated through field and physical testing on a larger

Development and Evaluation of a Cognitive Training Game for Older People: A Design-based Approach.

Science.gov (United States)

Lu, Ming-Hsin; Lin, Weijane; Yueh, Hsiu-Ping

2017-01-01

In the research field of cognitive aging, games have gained attention as training interventions to remediate age-related deficits. Cognitive training games on computer, video and mobile platforms have shown ample and positive support. However, the generalized effects are not agreed upon unanimously, and the game tasks are usually simple and decontextualized due to the limitations of measurements. This study adopted a qualitative approach of design-based research (DBR) to systematically review and pragmatically examine the regime, presentation and feedback design of a cognitive training game for older adults. An overview of the literature of cognitive aging and training games was conducted to form the theoretical conjectures of the design, and an iterative cycle and process were employed to develop a mobile game for older adults who are homebound or receiving care in a nursing home. Stakeholders, i.e., elderly users and institutional administrators, were invited to participate in the design process. Using two cycles of design and evaluation, a working prototype of an iPad-based app that accounted for the needs of elderly adults in terms of form, appearance and working function was developed and tested in the actual contexts of the participants' homes and an assisted living facility. The results showed that the cognitive training game developed in this study was accepted by the participants, and a high degree of satisfaction was noted. Moreover, the elements of the interface, including its size, layout and control flow, were tested and found to be suitable for use. This study contributes to the literature by providing design suggestions for such games, including the designs of the cognitive training structure, interface, interaction, instructions and feedback, based on empirical evidence collected in natural settings. This study further suggests that the effectiveness of cognitive training in mobile games be evaluated through field and physical testing on a larger

Towards Subject-Specific Strength Training Design through Predictive Use of Musculoskeletal Models

Directory of Open Access Journals (Sweden)

Michael Plüss

2018-01-01

Full Text Available Lower extremity dysfunction is often associated with hip muscle strength deficiencies. Detailed knowledge of the muscle forces generated in the hip under specific external loading conditions enables specific structures to be trained. The aim of this study was to find the most effective movement type and loading direction to enable the training of specific parts of the hip muscles using a standing posture and a pulley system. In a novel approach to release the predictive power of musculoskeletal modelling techniques based on inverse dynamics, flexion/extension and ab-/adduction movements were virtually created. To demonstrate the effectiveness of this approach, three hip orientations and an external loading force that was systematically rotated around the body were simulated using a state-of-the art OpenSim model in order to establish ideal designs for training of the anterior and posterior parts of the M. gluteus medius (GM. The external force direction as well as the hip orientation greatly influenced the muscle forces in the different parts of the GM. No setting was found for simultaneous training of the anterior and posterior parts with a muscle force higher than 50% of the maximum. Importantly, this study has demonstrated the use of musculoskeletal models as an approach to predict muscle force variations for different strength and rehabilitation exercise variations.

Optimized hardware design for the divertor remote handling control system

Energy Technology Data Exchange (ETDEWEB)

Saarinen, Hannu [Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere (Finland)], E-mail: hannu.saarinen@tut.fi; Tiitinen, Juha; Aha, Liisa; Muhammad, Ali; Mattila, Jouni; Siuko, Mikko; Vilenius, Matti [Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere (Finland); Jaervenpaeae, Jorma [VTT Systems Engineering, Tekniikankatu 1, 33720 Tampere (Finland); Irving, Mike; Damiani, Carlo; Semeraro, Luigi [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain)

2009-06-15

A key ITER maintenance activity is the exchange of the divertor cassettes. One of the major focuses of the EU Remote Handling (RH) programme has been the study and development of the remote handling equipment necessary for divertor exchange. The current major step in this programme involves the construction of a full scale physical test facility, namely DTP2 (Divertor Test Platform 2), in which to demonstrate and refine the RH equipment designs for ITER using prototypes. The major objective of the DTP2 project is the proof of concept studies of various RH devices, but is also important to define principles for standardizing control hardware and methods around the ITER maintenance equipment. This paper focuses on describing the control system hardware design optimization that is taking place at DTP2. Here there will be two RH movers, namely the Cassette Multifuctional Mover (CMM), Cassette Toroidal Mover (CTM) and assisting water hydraulic force feedback manipulators (WHMAN) located aboard each Mover. The idea here is to use common Real Time Operating Systems (RTOS), measurement and control IO-cards etc. for all maintenance devices and to standardize sensors and control components as much as possible. In this paper, new optimized DTP2 control system hardware design and some initial experimentation with the new DTP2 RH control system platform are presented. The proposed new approach is able to fulfil the functional requirements for both Mover and Manipulator control systems. Since the new control system hardware design has reduced architecture there are a number of benefits compared to the old approach. The simplified hardware solution enables the use of a single software development environment and a single communication protocol. This will result in easier maintainability of the software and hardware, less dependence on trained personnel, easier training of operators and hence reduced the development costs of ITER RH.

The System 80+ Standard Plant design control document. Volume 15

International Nuclear Information System (INIS)

1997-01-01

This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains all five parts of section 12 (Radiation Protection) of the ADM Design and Analysis. Topics covered are: ALARA exposures; radiation sources; radiation protection; dose assessment; and health physics program. All six parts and appendices A and B for section 13 (Conduct of Operations) of the ADM Design and Analysis are also contained in this volume. Topics covered are: organizational structure; training program; emergency planning; review and audit; plant procedures; industrial security; sabotage protection (App 13A); and vital equipment list (App 13B)

Efficacy of a Respiratory Training System on the Regularity of Breathing

International Nuclear Information System (INIS)

Shin, Eun Hyuk; Park, Hee Chul; Han, Young Yih; Ju, Sang Gyu; Shin, Jung Suk; Ahn, Yong Chan

2008-01-01

In order to enhance the efficiency of respiratory gated 4-dimensional radiation therapy for more regular and stable respiratory period and amplitude, a respiration training system was designed, and its efficacy was evaluated. Materials and Methods: The experiment was designed to measure the difference in respiration regularity following the use of a training system. A total of 11 subjects (9 volunteers and 2 patients) were included in the experiments. Three different breathing signals, including free breathing (free-breathing), guided breathing that followed training software (guided-breathing), and free breathing after the guided-breathing (post guided-breathing), were consecutively recorded in each subject. The peak-to-peak (PTP) period of the breathing signal, standard deviation (SD), peak-amplitude and its SD, area of the one cycle of the breathing wave form, and its root mean square (RMS) were measured and computed. Results: The temporal regularity was significantly improved in guided-breathing since the SD of breathing period reduced (free-breathing 0.568 vs guided-breathing 0.344, p=0.0013). The SD of the breathing period representing the post guided-breathing was also reduced, but the difference was not statistically significant (free-breathing 0.568 vs. guided-breathing 0.512, p=ns). Also the SD of measured amplitude was reduced in guided-breathing (free-breathing 1.317 vs. guided-breathing 1.068, p=0.187), although not significant. This indicated that the tidal volume for each breath was kept more even in guided-breathing compared to free-breathing. There was no change in breathing pattern between free-breathing and guided-breathing. The average area of breathing wave form and its RMS in postguided-breathing, however, was reduced by 7% and 5.9%, respectively. Conclusion: The guided-breathing was more stable and regular than the other forms of breathing data. Therefore, the developed respiratory training system was effective in improving the temporal

Design of dry scroll vacuum pumping system for efficient pumping of corrosive gas at medium vacuum range

International Nuclear Information System (INIS)

Banerjee, I.; Chandresh, B.G.; Guha, K.C.; Sarkar, S.

2015-01-01

Dry vacuum pumping systems attracts many applications because of its inherent capability of corrosion free pumping. It becomes a common trait of application in Thermo Nuclear Fusion, Semi conductor, Isotope separation industries etc. Thermo nuclear fusion requires a train of specially sealed roots pump backed by suitable capacity dry screw or reciprocating pump. Similarly corrosive fluoride gas pumping requires hermetically sealed specially designed dry scroll vacuum pump. Plant emergency operation however involves train of specially sealed roots pump backed with scroll pump for faster evacuation. In our attempt an indigenously designed scroll pump and associated system are designed to pump corrosive gases in a way to confine the corrosion product within the system. In order to execute the design, a numerical code for low pressure application is developed

The Study on Heuristic and Algorithmic Processing Creative Training on Product Design Education: Based on the Bags & Luggage design Course

Directory of Open Access Journals (Sweden)

Zhang Ziran

2018-01-01

Full Text Available In the study, context-creativity of Teresa M. Amabile was used as The foundation to apply it in the bags & luggage design course. Moreover, the sectional creative training education mode of prior heuristic task and postpositional algorithmic task was proposed. 26 junior students in product design were used as the trial objects. The Consensual Technique for Creativity (CAT was considered as the scoring standard of creative performance. In the end, the sectional theoretical framework of effective creative training in product design was finally proposed.

Information Systems and Management Training.

Science.gov (United States)

Curry, B.; Smith, D. G.

1991-01-01

A case study of a South Wales manufacturer illustrates the need for companies to adopt an integrated strategy for computerization and information systems. Lack of management training blending computing and business skills can have a crippling effect on system development and organizational health. (SK)

Team skills training

International Nuclear Information System (INIS)

Coe, R.P.; Carl, D.R.

1991-01-01

Numerous reports and articles have been written recently on the importance of team skills training for nuclear reactor operators, but little has appeared on the practical application of this theoretical guidance. This paper describes the activities of the Training and Education Department at GPU Nuclear (GPUN). In 1987, GPUN undertook a significant initiative in its licensed operator training programs to design and develop initial and requalification team skills training. Prior to that time, human interaction skills training (communication, stress management, supervisory skills, etc.) focused more on the individual rather than a group. Today, GPU Nuclear conducts team training at both its Three Mile Island (YMI), PA and Oyster Creek (OC), NJ generating stations. Videotaped feedback is sued extensively to critique and reinforce targeted behaviors. In fact, the TMI simulator trainer has a built-in, four camera system specifically designed for team training. Evaluations conducted on this training indicated these newly acquired skills are being carried over to the work environment. Team training is now an important and on-going part of GPUN operator training

Human Factors in Training

Science.gov (United States)

Barshi, Immanuel; Byrne, Vicky; Arsintescu, Lucia; Connell, Erin

2010-01-01

Future space missions will be significantly longer than current shuttle missions and new systems will be more complex than current systems. Increasing communication delays between crews and Earth-based support means that astronauts need to be prepared to handle the unexpected on their own. As crews become more autonomous, their potential span of control and required expertise must grow to match their autonomy. It is not possible to train for every eventuality ahead of time on the ground, or to maintain trained skills across long intervals of disuse. To adequately prepare NASA personnel for these challenges, new training approaches, methodologies, and tools are required. This research project aims at developing these training capabilities. By researching established training principles, examining future needs, and by using current practices in space flight training as test beds, both in Flight Controller and Crew Medical domains, this research project is mitigating program risks and generating templates and requirements to meet future training needs. Training efforts in Fiscal Year 09 (FY09) strongly focused on crew medical training, but also began exploring how Space Flight Resource Management training for Mission Operations Directorate (MOD) Flight Controllers could be integrated with systems training for optimal Mission Control Center (MCC) operations. The Training Task addresses Program risks that lie at the intersection of the following three risks identified by the Project: 1) Risk associated with poor task design; 2) Risk of error due to inadequate information; and 3) Risk associated with reduced safety and efficiency due to poor human factors design.

Technical Training: EMAG-2005 - Electromagnetic Design and Mathematical Optimization Methods in Magnet Technology

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005: Learning for the LHC! CERN Technical Training, in collaboration with the AT-MEL-EM section, is organising a new course series in the framework of the 2005 CERN Technical Training programme: EMAG-2005 - Electromagnetic Design and Mathematical Optimization Methods in Magnet Technology, composed of three-hour lectures in the morning and topical seminars in the afternoon. The EMAG-2005 course series will run at CERN from Monday April 4 until Thursday April 14 (no lectures on Friday 8). The course series, in English, will focus on the foundations of electromagnetism and the design of accelerator magnets, both normal conducting and superconducting, employing analytical and numerical field computations. Examples of the LHC magnet design using the CERN field computation program ROXIE will be presented. However, EMAG-2005 is not a ROXIE user course: it is rather a course for users or potential users of numerical field computation software, and for magnet designers. The course will be o...

Phantom-based interactive simulation system for dental treatment training.

Science.gov (United States)

Sae-Kee, Bundit; Riener, Robert; Frey, Martin; Pröll, Thomas; Burgkart, Rainer

2004-01-01

In this paper, we propose a new interactive simulation system for dental treatment training. The system comprises a virtual reality environment and a force-torque measuring device to enhance the capabilities of a passive phantom of tooth anatomy in dental treatment training processes. The measuring device is connected to the phantom, and provides essential input data for generating the graphic animations of physical behaviors such as drilling and bleeding. The animation methods of those physical behaviors are also presented. This system is not only able to enhance interactivity and accessibility of the training system compared to conventional methods but it also provides possibilities of recording, evaluating, and verifying the training results.

An Intelligent System for Aggression De-escalation Training

NARCIS (Netherlands)

Bosse, T.; Gerritsen, C.; de Man, J.

2016-01-01

Artificial Intelligence techniques are increasingly being used to develop smart training applications for professionals in various domains. This paper presents an intelligent training system that enables professionals in the public domain to practice their aggression de-escalation skills. The system

An Automated Motion Detection and Reward System for Animal Training.

Science.gov (United States)

Miller, Brad; Lim, Audrey N; Heidbreder, Arnold F; Black, Kevin J

2015-12-04

A variety of approaches has been used to minimize head movement during functional brain imaging studies in awake laboratory animals. Many laboratories expend substantial effort and time training animals to remain essentially motionless during such studies. We could not locate an "off-the-shelf" automated training system that suited our needs.  We developed a time- and labor-saving automated system to train animals to hold still for extended periods of time. The system uses a personal computer and modest external hardware to provide stimulus cues, monitor movement using commercial video surveillance components, and dispense rewards. A custom computer program automatically increases the motionless duration required for rewards based on performance during the training session but allows changes during sessions. This system was used to train cynomolgus monkeys (Macaca fascicularis) for awake neuroimaging studies using positron emission tomography (PET) and functional magnetic resonance imaging (fMRI). The automated system saved the trainer substantial time, presented stimuli and rewards in a highly consistent manner, and automatically documented training sessions. We have limited data to prove the training system's success, drawn from the automated records during training sessions, but we believe others may find it useful. The system can be adapted to a range of behavioral training/recording activities for research or commercial applications, and the software is freely available for non-commercial use.

Overview of Fluid System Design for the KJRR

Energy Technology Data Exchange (ETDEWEB)

Kim, Seong Hoon; Park, Cheol; Kim, Young-Ki [KAERI, Daejeon (Korea, Republic of)

2016-05-15

This paper introduces the fluid system design to fulfill the above mentioned requirements. The considerations and design change experiences are also presented. The KJRR fluid system consists of four systems: Primary Cooling System (PCS), Safety Residual Heat Removal System (SRHRS), Pool Water management System (PWMS), and Hot Water Layer System (HWLS). The main purpose of the fluid system for a RR is to remove the heat generated in the core and to transfer it to the secondary cooling system in which the heat is dissipated in the atmosphere. In the open-pool type research reactor, it needs to cool, purify, and make up the pool water. The main purpose of the KJRR is to produce medical and industrial radioisotopes, such as Mo-99, Ir-192, I- 131 etc., and to irradiate silicon ingots for Neutron Transmutation Doping. The thermal power of the KJRR is 15 MW{sub t} and the maximum thermal neutron flux is 3.0 x 10{sup 14} n/cm{sup 2}s. The fuel type is LEU U-Mo plate type and the reflector is Beryllium and Graphite. The Reactor Structure Assembly is submerged in the reactor pool. The reactor core is cooled by a downward forced flow that is maintained by pumps. Due to the downward flow the fuel assembly can be fixed on the grid plate without using the special device. KAERI have been successfully operating HANARO and constructing the Jordan Research and Training Reactor (JRTR). Along with the KJRR project, the fluid system design for a medium power research reactor has been developed and matured from the economic and the safety point of view. The fluid system of the KJRR is introduced and the objective of each system is explained briefly. The fluid system in research reactors is designed to meet the requirements from the upstream design areas.

Teaching strategic and systems design to facilitate collaboration and learning

Directory of Open Access Journals (Sweden)

Andre Liem

2012-08-01

Full Text Available As strategic and systems approaches are becoming more relevant in design education when it concerns collaborative projects with the industry, an explicit systems design methodology is needed to structure collaboration and learning among students, educators, and the Norwegian industry. This article describes three alternative studio projects for teaching strategic and systems design with the involvement of Norwegian companies. Besides this, the approaches and fundamental theories of design thinking and reasoning, which are characteristic of these projects, were reflected against each other. In the undergraduate (year 2 systems thinking design studio, the challenge was to train students to understand how system elements are rationally interconnected with their suprasystems and subsystems based on usability and man-machine interactions. In addition to the challenges pertaining to systems thinking, collabora­tive learning and designing based on a mentorship learning concept were introduced in the Vertical Design Studio, which involved second- and third-year students. Concerning the postgraduate fourth-year strategic design projects with the industry, the challenge was to involve Norwegian companies in product planning and goal finding as well as in innovation and design activities and to assess how supportive and receptive these companies were towards radical innovation/diversification. The analysis of completed projects shows that the Norwegian industry is supportive of strategic design but is rather conservative and risk averse when it concerns accepting and implementing radical innovation initiatives. Referring to user-centred and context-based innovation, this article also supports the implementation of a systems approach to facilitate social and hierarchical learning across the second-year systems design studio, second- and third-year vertical studios, and fourth-year strategic design studio.

A radiation protection training program designed to reduce occupational radiation dose to individuals using pneumatic-transfer systems at the Oregon State TRIGA reactor

International Nuclear Information System (INIS)

Johnson, A.G.; Anderson, T.V.; Pratt, D.; Dodd, B.; Carpenter, W.T.

1984-01-01

In order to keeping personnel doses as low as reasonably achievable, and also to help satisfy requirements of NRC regulations contained in 10 CFR 19, a training program was established to qualify all individuals prior to their use of the OSTR PT systems. Program objectives are directed mainly towards minimizing the spread of radioactive contamination and reducing the potential for unnecessary and inappropriate personnel radiation exposure; however, other operational and emergency procedures are also covered. The PT systems training program described in this report was established approximately 8 to 10 years ago but recently there was an increased interest to use it. Whether or not a PT system training program should be implemented at a specific TRIGA operation (assuming the facility is equipped with a PT system) will undoubtedly be influenced heavily by the nature and frequency of the PT system's use, by who uses the system, and by whether the system is one of the automatic loading and unloading types, or one of the more' commonly encountered manually operated systems. However, from our experience we feel that training commensurate with the type of PT system operation being conducted is a wise investment, and should be a requirement for all system operators

Development process of in-service training intended for teachers to perform teaching of mathematics with computer algebra systems

Science.gov (United States)

Ardıç, Mehmet Alper; Işleyen, Tevfik

2018-01-01

In this study, we deal with the development process of in-service training activities designed in order for mathematics teachers of secondary education to realize teaching of mathematics, utilizing computer algebra systems. In addition, the results obtained from the researches carried out during and after the in-service training were summarized. Last section focuses on suggestions any teacher can use to carry out activities aimed at using computer algebra systems in teaching environments.

Designing Class Activities to Meet Specific Core Training Competencies: A Developmental Approach

Science.gov (United States)

Guth, Lorraine J.; McDonnell, Kelly A.

2004-01-01

This article presents a developmental model for designing and utilizing class activities to meet specific Association for Specialists in Group Work (ASGW) core training competencies for group workers. A review of the relevant literature about teaching group work and meeting core training standards is provided. The authors suggest a process by…

Model-based verification method for solving the parameter uncertainty in the train control system

International Nuclear Information System (INIS)

Cheng, Ruijun; Zhou, Jin; Chen, Dewang; Song, Yongduan

2016-01-01

This paper presents a parameter analysis method to solve the parameter uncertainty problem for hybrid system and explore the correlation of key parameters for distributed control system. For improving the reusability of control model, the proposed approach provides the support for obtaining the constraint sets of all uncertain parameters in the abstract linear hybrid automata (LHA) model when satisfying the safety requirements of the train control system. Then, in order to solve the state space explosion problem, the online verification method is proposed to monitor the operating status of high-speed trains online because of the real-time property of the train control system. Furthermore, we construct the LHA formal models of train tracking model and movement authority (MA) generation process as cases to illustrate the effectiveness and efficiency of the proposed method. In the first case, we obtain the constraint sets of uncertain parameters to avoid collision between trains. In the second case, the correlation of position report cycle and MA generation cycle is analyzed under both the normal and the abnormal condition influenced by packet-loss factor. Finally, considering stochastic characterization of time distributions and real-time feature of moving block control system, the transient probabilities of wireless communication process are obtained by stochastic time petri nets. - Highlights: • We solve the parameters uncertainty problem by using model-based method. • We acquire the parameter constraint sets by verifying linear hybrid automata models. • Online verification algorithms are designed to monitor the high-speed trains. • We analyze the correlation of key parameters and uncritical parameters. • The transient probabilities are obtained by using reliability analysis.

Prioritizing Training To Maximize Results: The 3 Box System.

Science.gov (United States)

Kearns, Paul

2003-01-01

Considers fundamentals of effective training and focuses on the evaluation of training. Describes the 3 Box System, which provides a framework for discussing: (1) basic training needs and priorities; (2) added value training, including ROI (return on investment); evaluation; and (3) prioritizing training budgets. (LRW)

Virtual reality negotiation training system with virtual cognitions

NARCIS (Netherlands)

Ding, D.; Burger, F.; Brinkman, W.P.; Neerincx, M.A.

2017-01-01

A number of negotiation training systems have been developed to improve people’s performance in negotiation. They mainly focus on the skills development, and less on negotiation understanding and improving self-efficacy. We propose a virtual reality negotiation training system that exposes users to

Designing evidence-based medicine training to optimize the transfer of skills from the classroom to clinical practice: applying the four component instructional design model.

Science.gov (United States)

Maggio, Lauren A; Cate, Olle Ten; Irby, David M; O'Brien, Bridget C

2015-11-01

Evidence-based medicine (EBM) skills, although taught in medical schools around the world, are not optimally practiced in clinical environments because of multiple barriers, including learners' difficulty transferring EBM skills learned in the classroom to clinical practice. This lack of skill transfer may be partially due to the design of EBM training. To facilitate the transfer of EBM skills from the classroom to clinical practice, the authors explore one instructional approach, called the Four Component Instructional Design (4C/ID) model, to guide the design of EBM training. On the basis of current cognitive psychology, including cognitive load theory, the premise of the 4C/ID model is that complex skills training, such as EBM training, should include four components: learning tasks, supportive information, procedural information, and part-task practice. The combination of these four components can inform the creation of complex skills training that is designed to avoid overloading learners' cognitive abilities; to facilitate the integration of the knowledge, skills, and attitudes needed to execute a complex task; and to increase the transfer of knowledge to new situations. The authors begin by introducing the 4C/ID model and describing the benefits of its four components to guide the design of EBM training. They include illustrative examples of educational practices that are consistent with each component and that can be applied to teaching EBM. They conclude by suggesting that medical educators consider adopting the 4C/ID model to design, modify, and/or implement EBM training in classroom and clinical settings.

A general-purpose development environment for intelligent computer-aided training systems

Science.gov (United States)

Savely, Robert T.

1990-01-01

Space station training will be a major task, requiring the creation of large numbers of simulation-based training systems for crew, flight controllers, and ground-based support personnel. Given the long duration of space station missions and the large number of activities supported by the space station, the extension of space shuttle training methods to space station training may prove to be impractical. The application of artificial intelligence technology to simulation training can provide the ability to deliver individualized training to large numbers of personnel in a distributed workstation environment. The principal objective of this project is the creation of a software development environment which can be used to build intelligent training systems for procedural tasks associated with the operation of the space station. Current NASA Johnson Space Center projects and joint projects with other NASA operational centers will result in specific training systems for existing space shuttle crew, ground support personnel, and flight controller tasks. Concurrently with the creation of these systems, a general-purpose development environment for intelligent computer-aided training systems will be built. Such an environment would permit the rapid production, delivery, and evolution of training systems for space station crew, flight controllers, and other support personnel. The widespread use of such systems will serve to preserve task and training expertise, support the training of many personnel in a distributed manner, and ensure the uniformity and verifiability of training experiences. As a result, significant reductions in training costs can be realized while safety and the probability of mission success can be enhanced.

Training plumbers to design and install solar water heating systems for households (''SHINE 21'')

International Nuclear Information System (INIS)

2001-01-01

This report summarises the findings of a project to develop training materials to help the plumbing industry take advantage of the growth in the UK solar water heating market. Details are given of a questionnaire survey of plumbers relating to their experience of solar water heating and their attitudes to training, and the development of a new training course file, video, CD-ROM, trainer's pack, and business skills module. The development and piloting of the training programmes and the development of models for regional co-operation are described along with methods for driving the demand for training and co-operation with other European Member states. Recommendations for further work are given

Energy Systems Training Programs and Certifications Survey White Paper

Energy Technology Data Exchange (ETDEWEB)

Cox, Daryl [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nimbalkar, Sachin U. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wenning, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Thirumaran, Kiran [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Guo, Wei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-02-01

Compressed air system, industrial refrigeration system, chilled water system, pump system, fan system, steam system, process heating system, and combined heat and power system are the major industrial energy systems. By helping enhance knowledge and skills of workforce, training and certification programs on these systems are essential to improve energy efficiency of manufacturing facilities. A literature survey of currently available training and certification programs on these systems was conducted.

The vocational education and training system in Denmark

DEFF Research Database (Denmark)

Cort, Pia; Wiborg, Susanne

2009-01-01

Analysis of developments in vocational education and training systems in Australia, Canada, Denmark, France, Germany, Korea, Mexico, Morocco, the UK and the US.......Analysis of developments in vocational education and training systems in Australia, Canada, Denmark, France, Germany, Korea, Mexico, Morocco, the UK and the US....

The study of system function analysis method for success path alarm design

International Nuclear Information System (INIS)

Kang, S. K.; Shin, Y. C.

1999-01-01

The key benefit to the common use of the critical function approach for safety and mission functions is that monitoring methods expected to be used by operaotrs during emergency condition are used continuously during normal operation. For each critical safety function there exists two or more success paths. Information Processing System monitors the availability, operation state and performance of the critical function success paths. In this paper, We have studied System Function Analysis(SFA) for the design of Success Path Alarm(SPA) for applying in KNGR. In here, we thought that SFA will help the design of SPA. The SFA can be applicable to the design of SPA according to NUREG-0711, also can induce the algorithm for alarm of system, train and flow path. We present a method of system function analysis for designing Success Path Alarm

Development and Evaluation of a Cognitive Training Game for Older People: A Design-based Approach

Directory of Open Access Journals (Sweden)

Ming-Hsin Lu

2017-10-01

Full Text Available In the research field of cognitive aging, games have gained attention as training interventions to remediate age-related deficits. Cognitive training games on computer, video and mobile platforms have shown ample and positive support. However, the generalized effects are not agreed upon unanimously, and the game tasks are usually simple and decontextualized due to the limitations of measurements. This study adopted a qualitative approach of design-based research (DBR to systematically review and pragmatically examine the regime, presentation and feedback design of a cognitive training game for older adults. An overview of the literature of cognitive aging and training games was conducted to form the theoretical conjectures of the design, and an iterative cycle and process were employed to develop a mobile game for older adults who are homebound or receiving care in a nursing home. Stakeholders, i.e., elderly users and institutional administrators, were invited to participate in the design process. Using two cycles of design and evaluation, a working prototype of an iPad-based app that accounted for the needs of elderly adults in terms of form, appearance and working function was developed and tested in the actual contexts of the participants' homes and an assisted living facility. The results showed that the cognitive training game developed in this study was accepted by the participants, and a high degree of satisfaction was noted. Moreover, the elements of the interface, including its size, layout and control flow, were tested and found to be suitable for use. This study contributes to the literature by providing design suggestions for such games, including the designs of the cognitive training structure, interface, interaction, instructions and feedback, based on empirical evidence collected in natural settings. This study further suggests that the effectiveness of cognitive training in mobile games be evaluated through field and physical

Web-based home rehabilitation gaming system for balance training

Directory of Open Access Journals (Sweden)

Oleh Kachmar

2014-06-01

Full Text Available Currently, most systems for virtual rehabilitation and motor training require quite complex and expensive hardware and can be used only in clinical settings. Now, a low-cost rehabilitation game training system has been developed for patients with movement disorders; it is suitable for home use under the distant supervision of a therapist. It consists of a patient-side application installed on a home computer and the virtual rehabilitation Game Server in the Internet. System can work with different input gaming devices connected through USB or Bluetooth, such as a Nintendo Wii balance board, a Nintendo Wii remote, a MS Kinect sensor, and custom made rehabilitation gaming devices based on a joystick. The same games can be used with all training devices. Assessment of the Home Rehabilitation Gaming System for balance training was performed on six patients with Cerebral Palsy, who went through daily training sessions for two weeks. Preliminary results showed balance improvement in patients with Cerebral Palsy after they had completed home training courses. Further studies are needed to establish medical requirements and evidence length.

Innovative Radiating Systems for Train Localization in Interference Conditions

Directory of Open Access Journals (Sweden)

C. Vegni

2013-01-01

Full Text Available The design of innovative radiating systems based on the metamaterial technology for GNSS (Global Navigation Satellite System applications in radio frequency (RF interference conditions is proposed. To this aim, firstly two typical adaptive array techniques (i.e., nulling and beam-forming are discussed and tradeed off. Secondly, FRPA (Fixed Radiation Pattern Antenna and CRPA (Controlled Radiation Pattern Antenna phased array configurations of miniaturized patch antennas are studied by means of electromagnetic commercial tools and phased array optimization algorithms. This process leads to the identification of a phased array design. Benefits and drawbacks for GNSS applications are highlighted. Finally, the design of the phased array is applied to a GNSS user receiver in a navigation realistic environment. Simulation results are obtained in a realistic scenario for railway applications, comprising of a GNSS satellite constellation, a GNSS user receiver (i.e., on-board train equipment running along a track in Western Australia, and a constellation of interfering satellites. Navigation service performances (i.e., user location accuracy and service availability are computed taking into account the adaptive array radiation pattern in two different modes (i.e., FRPA or CRPA and band-limited white noise interference.

Product design engineering - a global education trend in multidisciplinary training for creative product design

Science.gov (United States)

de Vere, Ian; Melles, Gavin; Kapoor, Ajay

2010-03-01

Product design is the convergence point for engineering and design thinking and practices. Until recently, product design has been taught either as a component of mechanical engineering or as a subject within design schools but increasingly there is global recognition of the need for greater synergies between industrial design and engineering training. Product design engineering (PDE) is a new interdisciplinary programme combining the strengths of the industrial design and engineering. This paper examines the emergence of PDE in an environment of critique of conventional engineering education and exemplifies the current spread of programmes endorsing a hybrid programme of design and engineering skills. The paper exemplifies PDE with the analysis of the programme offered at Swinburne University of Technology (Australia), showing how the teaching of 'designerly' thinking to engineers produces a new graduate particularly suited to the current and future environment of produce design practice. The paper concludes with reflections on the significance of this innovative curriculum model for the field of product design and for engineering design in general.

Subway platform air quality: Assessing the influences of tunnel ventilation, train piston effect and station design

Science.gov (United States)

Moreno, T.; Pérez, N.; Reche, C.; Martins, V.; de Miguel, E.; Capdevila, M.; Centelles, S.; Minguillón, M. C.; Amato, F.; Alastuey, A.; Querol, X.; Gibbons, W.

2014-08-01

A high resolution air quality monitoring campaign (PM, CO2 and CO) was conducted on differently designed station platforms in the Barcelona subway system under: (a) normal forced tunnel ventilation, and (b) with daytime tunnel ventilation systems shut down. PM concentrations are highly variable (6-128 μgPM1 m-3, 16-314 μgPM3 m-3, and 33-332 μgPM10 m-3, 15-min averages) depending on ventilation conditions and station design. Narrow platforms served by single-track tunnels are heavily dependent on forced tunnel ventilation and cannot rely on the train piston effect alone to reduce platform PM concentrations. In contrast PM levels in stations with spacious double-track tunnels are not greatly affected when tunnel ventilation is switched off, offering the possibility of significant energy savings without damaging air quality. Sampling at different positions along the platform reveals considerable lateral variation, with the greatest accumulation of particulates occurring at one end of the platform. Passenger accesses can dilute PM concentrations by introducing cleaner outside air, although lateral down-platform accesses are less effective than those positioned at the train entry point. CO concentrations on the platform are very low (≤1 ppm) and probably controlled by ingress of traffic-contaminated street-level air. CO2 averages range from 371 to 569 ppm, changing during the build-up and exchange of passengers with each passing train.

Measuring Training ROI: Silver Bullet or Urban Legend

Science.gov (United States)

2008-06-01

TSRD Doc NAWC Training Systems Division. Training Systems Requirements Analysis Webpage, 30 August 2007 Training System Plan Engineering Specs...QUESTIONNAIRES PERFORMANCE CONTRACTING MONITORING MEASURES OF EFFECTIVENESS 1-X: MSN EFFECTIVENESS (OUTPUT-ORIENTED) e.g.: SAFETY ENVIROMENTAL IMPACT...All costs required to research and develop a system before committing it to production ( engineering design, manufacturing of test articles, testing

Trainer variability during step training after spinal cord injury: Implications for robotic gait-training device design.

Science.gov (United States)

Galvez, Jose A; Budovitch, Amy; Harkema, Susan J; Reinkensmeyer, David J

2011-01-01

Robotic devices are being developed to automate repetitive aspects of walking retraining after neurological injuries, in part because they might improve the consistency and quality of training. However, it is unclear how inconsistent manual training actually is or whether stepping quality depends strongly on the trainers' manual skill. The objective of this study was to quantify trainer variability of manual skill during step training using body-weight support on a treadmill and assess factors of trainer skill. We attached a sensorized orthosis to one leg of each patient with spinal cord injury and measured the shank kinematics and forces exerted by different trainers during six training sessions. An expert trainer rated the trainers' skill level based on videotape recordings. Between-trainer force variability was substantial, about two times greater than within-trainer variability. Trainer skill rating correlated strongly with two gait features: better knee extension during stance and fewer episodes of toe dragging. Better knee extension correlated directly with larger knee horizontal assistance force, but better toe clearance did not correlate with larger ankle push-up force; rather, it correlated with better knee and hip extension. These results are useful to inform robotic gait-training design.

Unmanned Aerial System Four-Dimensional Gunnery Training Device Development

Science.gov (United States)

2017-10-01

Aerial System (UAS) Four-Dimensional Gunnery Training Device: Training Effectiveness Assessment (James & Miller, in press). 31 Technical ...Research Product 2018-05 Unmanned Aerial System Four-Dimensional Gunnery Training Device Development David R. James...for the Department of the Army by Northrop Grumman Corporation. Technical review by Thomas Rhett Graves, Ph.D., U.S. Army Research Institute

CERN Technical Training 2006: Software and System Technologies Curriculum - Scheduled Course Sessions (October-December 2006)

CERN Multimedia

2006-01-01

he Software and System Technologies Curriculum of the CERN Technical Training Programme offers comprehensive training in C++, Java, Perl, Python, XML, OO programming, JCOP/PVSS, database design and Oracle. In the PERL, C++, OO and Java course series there are some places available on the following course sessions, scheduled until the end of this year: Object-Oriented Analysis and Design using UML: 17-19 October 2006 (3 days) JAVA 2 Enterprise Edition - Part 1: Web Applications: 19-20 October 2006 (2 days) JAVA - Level 1: 30 Oct. -1 Nov. 2006 (3 days) PERL 5 - Advanced Aspects: 2 November 2006 (1 day) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming: 14-16 November 2006 (3 days) JAVA - Level 2: 4-7 December 2006 (4 days) C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls: 12-15 December 2006 (4 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans : 18.20 December 2006 (3 days) All the above sessions will be given in English, at the CERN Training Centre....

Criteria to evaluate SAT-based training programs

International Nuclear Information System (INIS)

Arjona, O.; Venegas, M.; Rodriguez, L.; Lopez, M.

1997-01-01

This paper present some coefficients of error obtained to evaluate the quality of the design development and implementation of SAT-based personnel training programs. With the attainment of these coefficients, with the use of the GESAT system, is facilitated the continuos evaluation of training programs and the main deficiencies in the design, development and implementation of training programs are obtained, through the comparison between the program features and their standards or wanted features and doing an statistics analysis of the data kept in the GESAT system

Innovation Analysis Approach to Design Parameters of High Speed Train Carriage and Their Intrinsic Complexity Relationships

Science.gov (United States)

Xiao, Shou-Ne; Wang, Ming-Meng; Hu, Guang-Zhong; Yang, Guang-Wu

2017-09-01

In view of the problem that it's difficult to accurately grasp the influence range and transmission path of the vehicle top design requirements on the underlying design parameters. Applying directed-weighted complex network to product parameter model is an important method that can clarify the relationships between product parameters and establish the top-down design of a product. The relationships of the product parameters of each node are calculated via a simple path searching algorithm, and the main design parameters are extracted by analysis and comparison. A uniform definition of the index formula for out-in degree can be provided based on the analysis of out-in-degree width and depth and control strength of train carriage body parameters. Vehicle gauge, axle load, crosswind and other parameters with higher values of the out-degree index are the most important boundary conditions; the most considerable performance indices are the parameters that have higher values of the out-in-degree index including torsional stiffness, maximum testing speed, service life of the vehicle, and so on; the main design parameters contain train carriage body weight, train weight per extended metre, train height and other parameters with higher values of the in-degree index. The network not only provides theoretical guidance for exploring the relationship of design parameters, but also further enriches the application of forward design method to high-speed trains.

NASA-GIT predoctoral design training program. [systems and mechanical engineering

Science.gov (United States)

1974-01-01

The training program is discussed briefly, and the quantity and quality of academic achievement of those students who were supported by the traineeships are summarized. Dissertations which were completed or on which substantial progress was made are listed, along with a short description of the activities and status of each of the former trainees.

System design of a large fuel cell hybrid locomotive

Science.gov (United States)

Miller, A. R.; Hess, K. S.; Barnes, D. L.; Erickson, T. L.

Fuel cell power for locomotives combines the environmental benefits of a catenary-electric locomotive with the higher overall energy efficiency and lower infrastructure costs of a diesel-electric. A North American consortium, a public-private partnership, is developing a prototype hydrogen-fueled fuel cell-battery hybrid switcher locomotive for urban and military-base rail applications. Switcher locomotives are used in rail yards for assembling and disassembling trains and moving trains from one point to another. At 127 tonnes (280,000 lb), continuous power of 250 kW from its (proton exchange membrane) PEM fuel cell prime mover, and transient power well in excess of 1 MW, the hybrid locomotive will be the heaviest and most powerful fuel cell land vehicle yet. This fast-paced project calls for completion of the vehicle itself near the end of 2007. Several technical challenges not found in the development of smaller vehicles arise when designing and developing such a large fuel cell vehicle. Weight, center of gravity, packaging, and safety were design factors leading to, among other features, the roof location of the lightweight 350 bar compressed hydrogen storage system. Harsh operating conditions, especially shock loads during coupling to railcars, require component mounting systems capable of absorbing high energy. Vehicle scale-up by increasing mass, density, or power presents new challenges primarily related to issues of system layout, hydrogen storage, heat transfer, and shock loads.

Object-Oriented Control System Design Using On-Line Training of Artificial Neural Networks

Science.gov (United States)

Rubaai, Ahmed

1997-01-01

This report deals with the object-oriented model development of a neuro-controller design for permanent magnet (PM) dc motor drives. The system under study is described as a collection of interacting objects. Each object module describes the object behaviors, called methods. The characteristics of the object are included in its variables. The knowledge of the object exists within its variables, and the performance is determined by its methods. This structure maps well to the real world objects that comprise the system being modeled. A dynamic learning architecture that possesses the capabilities of simultaneous on-line identification and control is incorporated to enforce constraints on connections and control the dynamics of the motor. The control action is implemented "on-line", in "real time" in such a way that the predicted trajectory follows a specified reference model. A design example of controlling a PM dc motor drive on-line shows the effectiveness of the design tool. This will therefore be very useful in aerospace applications. It is expected to provide an innovative and noval software model for the rocket engine numerical simulator executive.

[Real-time Gait Training System with Embedded Functional Electrical Stimulation].

Science.gov (United States)

Gu, Linyan; Ruan, Zhaomin; Jia, Guifeng; Xla, Jing; Qiu, Lijian; Wu, Changwang; Jin, Xiaoqing; Ning, Gangmin

2015-07-01

To solve the problem that mostly gait analysis is independent from the treatment, this work proposes a system that integrates the functions of gait training and assessment for foot drop treatment. The system uses a set of sensors to collect gait parameters and designes multi-mode functional electrical stimulators as actuator. Body area network technology is introduced to coordinate the data communication and execution of the sensors and stimulators, synchronize the gait analysis and foot drop treatment. Bluetooth 4.0 is applied to low the power consumption of the system. The system realizes the synchronization of treatment and gait analysis. It is able to acquire and analyze the dynamic parameters of ankle, knee and hip in real-time, and treat patients by guiding functional electrical stimulation delivery to the specific body locations of patients.

A Role of the Parasympathetic Nervous System in Cognitive Training.

Science.gov (United States)

Lin, Feng; Heffner, Kathi L; Ren, Ping; Tadin, Duje

2017-01-01

Vision-based speed of processing (VSOP) training can result in broad cognitive improvements in older adults with amnestic mild cognitive impairment (aMCI). What remains unknown, however, is what neurophysiological mechanisms account for the observed training effect. Much of the work in this area has focused on the central nervous system, neglecting the fact that the peripheral system can contributes to changes of the central nervous system and vice versa. We examined the prospective relationship between an adaptive parasympathetic nervous system response to cognitive stimuli and VSOP training-induced plasticity. Twenty-one participants with aMCI (10 for VSOP training, and 11 for mental leisure activities (MLA) control) were enrolled. We assessed high-frequency heart rate variability (HF-HRV) during training sessions, and striatum-related neural networks and cognition at baseline and post-training. Compared to MLA, the VSOP group showed a significant U-shaped pattern of HF-HRV response during training, as well as decreases in connectivity strength between bilateral striatal and prefrontal regions. These two effects were associated with training-induced improvements in both the trained (attention and processing speed) and transferred (working memory) cognitive domains. This work provides novel support for interactions between the central and the peripheral nervous systems in relation to cognitive training, and motivates further studies to elucidate the causality of the observed link. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Finding the optimal shape of the leading-and-trailing car of a high-speed train using design-by-morphing

Science.gov (United States)

Oh, Sahuck; Jiang, Chung-Hsiang; Jiang, Chiyu; Marcus, Philip S.

2017-10-01

We present a new, general design method, called design-by-morphing for an object whose performance is determined by its shape due to hydrodynamic, aerodynamic, structural, or thermal requirements. To illustrate the method, we design a new leading-and-trailing car of a train by morphing existing, baseline leading-and-trailing cars to minimize the drag. In design-by-morphing, the morphing is done by representing the shapes with polygonal meshes and spectrally with a truncated series of spherical harmonics. The optimal design is found by computing the optimal weights of each of the baseline shapes so that the morphed shape has minimum drag. As a result of optimization, we found that with only two baseline trains that mimic current high-speed trains with low drag that the drag of the optimal train is reduced by 8.04% with respect to the baseline train with the smaller drag. When we repeat the optimization by adding a third baseline train that under-performs compared to the other baseline train, the drag of the new optimal train is reduced by 13.46% . This finding shows that bad examples of design are as useful as good examples in determining an optimal design. We show that design-by-morphing can be extended to many engineering problems in which the performance of an object depends on its shape.

Computer based training: Technology and trends

International Nuclear Information System (INIS)

O'Neal, A.F.

1986-01-01

Computer Based Training (CBT) offers great potential for revolutionizing the training environment. Tremendous advances in computer cost performance, instructional design science, and authoring systems have combined to put CBT within the reach of all. The ability of today's CBT systems to implement powerful training strategies, simulate complex processes and systems, and individualize and control the training process make it certain that CBT will now, at long last, live up to its potential. This paper reviews the major technologies and trends involved and offers some suggestions for getting started in CBT

Using a Design-Based Research Study to Identify Principles for Training Instructors to Teach Online

Science.gov (United States)

Shattuck, Julie; Anderson, Terry

2013-01-01

Within the overall framework of design-based research, this paper reports on a study that focused on evaluating an online training course for online instructors. This intervention was designed as a possible solution to the problem facing some higher education institutions of how to provide quality, accessible training for mostly part-time…

Transfer of Learning in Management Training: Building the Payoff Into the Instructional Design.

Science.gov (United States)

Kruger, Michael J.; May, Gregory D.

1986-01-01

Describes two reinforcement techniques designed to ensure transfer of learning from management training courses to the workplace: (1) participant journal writing to capture management insights occurring during training and (2) support groups providing encouragement, feedback, and accountability. Results of an evaluation of the techniques'…

Training reactor deployment. Advanced experimental course on designing new reactor cores

International Nuclear Information System (INIS)

Skoda, Radek

2009-01-01

Czech Technical University in Prague (CTU) operating its training nuclear reactor VR1, in cooperation with the North West University of South Africa (NWU), is applying for accreditation of the experimental training course ''Advanced experimental course on designing the new reactor core'' that will guide the students, young nuclear engineering professionals, through designing, calculating, approval, and assembling a new nuclear reactor core. Students, young professionals from the South African nuclear industry, face the situation when a new nuclear reactor core is to be build from scratch. Several reactor core design options are pre-calculated. The selected design is re-calculated by the students, the result is then scrutinized by the regulator and, once all the analysis is approved, physical dismantling of the current core and assembling of the new core is done by the students, under a close supervision of the CTU staff. Finally the reactor is made critical with the new core. The presentation focuses on practical issues of such a course, desired reactor features and namely pedagogical and safety aspects. (orig.)

Battle Staff Training System II: Computer-Based Instruction Supporting the Force XXI Training Program

National Research Council Canada - National Science Library

Wampler, Richard

1998-01-01

This report documents the methodology and lessons learned in the development of the Innovative Tools and Techniques for Brigade and Below Staff Training II - Battle Staff Training System II (ITTBBST-BSTS II...

Training and certification program of the operating staff for a 90-day test of a regenerative life support system

Science.gov (United States)

1972-01-01

Prior to beginning a 90-day test of a regenerative life support system, a need was identified for a training and certification program to qualify an operating staff for conducting the test. The staff was responsible for operating and maintaining the test facility, monitoring and ensuring crew safety, and implementing procedures to ensure effective mission performance with good data collection and analysis. The training program was designed to ensure that each operating staff member was capable of performing his assigned function and was sufficiently cross-trained to serve at certain other positions on a contingency basis. Complicating the training program were budget and schedule limitations, and the high level of sophistication of test systems.

Designing information systems

CERN Document Server

Blethyn, Stanley G

2014-01-01

Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

Cuerpo de Paz Manual de Sistema de Programacion y Capacitacion (Peace Corps Programming and Training System Manual): T0063.

Science.gov (United States)

Peace Corps, Washington, DC.

This Spanish version of the Peace Corps Programming and Training System Manual is designed to help field staff members of the Peace Corps train volunteers. Its task descriptions, guidelines, examples, and definitions are intended to be practical and informative rather than restrictive. The manual is divided into six major sections: (1)…

Effects of Game Design Patterns on Basic Life Support Training Content

Science.gov (United States)

Kelle, Sebastian; Klemke, Roland; Specht, Marcus

2013-01-01

Based on a previous analysis of game design patterns and related effects in an educational scenario, the following paper presents an experimental study. In the study a course for Basic Life Support training has been evaluated and two game design patterns have been applied to the course. The hypotheses evaluated in this paper relate to game design…

ISD Designed Medical Specialist Training.

Science.gov (United States)

Rock, Samuel K., Jr.; Chagalis, George P.

The Basic Medical Specialist course has one of the largest enrollments of the U.S. Army's Academy of Health Sciences; 11,000 soldiers were trained in this course in 1977 and 1978. Training encompasses both emergency first aid (for field medics) and basic nursing skills. A task force working to improve Army training developed this course, in…

Constrained Optimization of MIMO Training Sequences

Directory of Open Access Journals (Sweden)

Coon Justin P

2007-01-01

Full Text Available Multiple-input multiple-output (MIMO systems have shown a huge potential for increased spectral efficiency and throughput. With an increasing number of transmitting antennas comes the burden of providing training for channel estimation for coherent detection. In some special cases optimal, in the sense of mean-squared error (MSE, training sequences have been designed. However, in many practical systems it is not feasible to analytically find optimal solutions and numerical techniques must be used. In this paper, two systems (unique word (UW single carrier and OFDM with nulled subcarriers are considered and a method of designing near-optimal training sequences using nonlinear optimization techniques is proposed. In particular, interior-point (IP algorithms such as the barrier method are discussed. Although the two systems seem unrelated, the cost function, which is the MSE of the channel estimate, is shown to be effectively the same for each scenario. Also, additional constraints, such as peak-to-average power ratio (PAPR, are considered and shown to be easily included in the optimization process. Numerical examples illustrate the effectiveness of the designed training sequences, both in terms of MSE and bit-error rate (BER.

Developing and delivering food systems training programs for 21st century audiences

Directory of Open Access Journals (Sweden)

Troy Hahn

2016-04-01

Full Text Available Expectations for training programmes today are very different from expectations for training programmes in the past, because today’s audiences are not only multigenerational, but the younger generations learn in distinctly different ways from older, more traditional audiences. To meet the needs of these multigenerational audiences, the Auburn University Food Systems Institute (AUFSI has developed on-demand, online courses that offer a variety of ways for learners to interact with training materials. For example, a typical course may offer not only traditional text, but audio, video, simulations, and more. In addition, AUFSI has developed supporting educational tools such as interactive virtual tours and video games. This approach to creating courses is a response to the  different levels of experiences of the generations as well as different expectations of how materials should be delivered. In order to be effective, training materials need to be designed to appeal to this multigenerational audience. Traditionalists (born before 1946 prefer face-to-face training programmes. Baby Boomers (born 1946-1964 are more accepting of technology. Generations X (born 1965-1980, Y (born 1981- 2000 and C (born after 2000, however, expect to receive training at their convenience, to have it delivered electronically, and to be entertained as well as educated.

Wind Systems for Pumping Water: A Training Manual. No. T-25.

Science.gov (United States)

Eschenbach, Willis

This document was prepared as a training manual for people interested in developing appropriate technological approaches to using wind power to pump water. The training program is divided into two basic formats, one in which a session focuses on the design process and participants are expected to do some design work in groups, and another which…

Training Early Career Scientists in Flight Instrument Design Through Experiential Learning: NASA Goddard's Planetary Science Winter School.

Science.gov (United States)

Bleacher, L. V.; Lakew, B.; Bracken, J.; Brown, T.; Rivera, R.

2017-01-01

The NASA Goddard Planetary Science Winter School (PSWS) is a Goddard Space Flight Center-sponsored training program, managed by Goddard's Solar System Exploration Division (SSED), for Goddard-based postdoctoral fellows and early career planetary scientists. Currently in its third year, the PSWS is an experiential training program for scientists interested in participating on future planetary science instrument teams. Inspired by the NASA Planetary Science Summer School, Goddard's PSWS is unique in that participants learn the flight instrument lifecycle by designing a planetary flight instrument under actual consideration by Goddard for proposal and development. They work alongside the instrument Principal Investigator (PI) and engineers in Goddard's Instrument Design Laboratory (IDL; idc.nasa.gov), to develop a science traceability matrix and design the instrument, culminating in a conceptual design and presentation to the PI, the IDL team and Goddard management. By shadowing and working alongside IDL discipline engineers, participants experience firsthand the science and cost constraints, trade-offs, and teamwork that are required for optimal instrument design. Each PSWS is collaboratively designed with representatives from SSED, IDL, and the instrument PI, to ensure value added for all stakeholders. The pilot PSWS was held in early 2015, with a second implementation in early 2016. Feedback from past participants was used to design the 2017 PSWS, which is underway as of the writing of this abstract.

Design and evaluation of the computer-based training program Calcularis for enhancing numerical cognition

Directory of Open Access Journals (Sweden)

Tanja eKäser

2013-08-01

Full Text Available This article presents the design and a first pilot evaluation of the computer-based training program Calcularis for children with developmental dyscalculia (DD or difficulties in learning mathematics. The program has been designed according to insights on the typical and atypical development of mathematical abilities. The learning process is supported through multimodal cues, which encode different properties of numbers. To offer optimal learning conditions, a user model completes the program and allows flexible adaptation to a child’s individual learning and knowledge profile. 32 children with difficulties in learning mathematics completed the 6 to 12-weeks computer training. The children played the game for 20 minutes per day for 5 days a week. The training effects were evaluated using neuropsychological tests. Generally, children benefited significantly from the training regarding number representation and arithmetic operations. Furthermore, children liked to play with the program and reported that the training improved their mathematical abilities.

Modeling and design of hybrid vehicle propulsion systems for passenger cars

NARCIS (Netherlands)

Hofman, Theo; Steinbuch, Maarten; Van Dritten, Roëll; Serrarens, Alex

2007-01-01

Designing a hybrid drive train implies, that choices have to be made regarding the drive train structure, component technologies, and - sizes. Designing an appropriate Energy Management Strategy (EMS), that facilitates the usage of the chosen components and drive train structure to its best

CAI and training system for the emergency operation procedure in the advanced thermal reactor, FUGEN

International Nuclear Information System (INIS)

Kozaki, T.; Imanaga, K.; Nakamura, S.; Maeda, K.; Sakurai, N.; Miyamoto, M.

2003-01-01

In the Advanced Thermal Reactor (ATR ) of the JNC, 'FUGEN', a symptom based Emergency Operating Procedure (EOF) was introduced in order to operate Fugen more safely and it became necessary for the plant operators to master the EOF. However it took a lot of time for the instructor to teach the EOP to operators and to train them. Thus, we have developed a Computer Aided Instruction (CAI) and Training System for the EOP, by which the operators can learn the EOP and can be trained. This system has two major functions, i.e., CAI and training. In the CAI function, there are three learning courses, namely, the EOP procedure, the simulation with guidance and Q and A, and the free simulation. In the training function, all of necessary control instruments (indicators, switches, annunciators and so forth) and physics models for the EOP training are simulated so that the trainees can be trained for all of the EOPs. In addition, 50 kinds of malfunction models are installed in order to perform appropriate accident scenarios for the EOP. The training of the EOP covers the range from AOO (Anticipated Operational Occurrence) to Over-DBAs (Design Based Accidents). This system is built in three personal computers that are connected by the computer network. One of the computers is expected to be used for the instructor and the other two are for the trainees. The EOP is composed of eight guidelines, such as 'Reactor Control' and 'Depression and Cooling', and the operation screens which are corresponded to the guidelines are respectively provided. According to the trial, we have estimated that the efficiency of the learning and the training would be improved about 30% for the trainee and about 75% for the instructor in the actual learning and training. (author)

Interventions for hiring, retaining and training district health systems managers in low- and middle-income countries.

Science.gov (United States)

Rockers, Peter C; Bärnighausen, Till

2013-04-30

District managers are playing an increasingly important role in determining the performance of health systems in low- and middle-income countries as a result of decentralization. To assess the effectiveness of interventions to hire, retain and train district health systems managers in low- and middle-income countries. We searched a wide range of international databases, including the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE and EMBASE. We also searched online resources of international agencies, including the World Bank, to find relevant grey literature. Searches were conducted in December 2011. District health systems managers are those persons who are responsible for overseeing the operations of the health system within a defined, subnational geographical area that is designated as a district. Hiring and retention interventions include those that aim to increase the attractiveness of district management positions, as well as those related to hiring and retention processes, such as private contracting. Training interventions include education programs to develop future managers and on-the-job training programs for current managers. To be included, studies needed to use one of the following study designs: randomized controlled trial, nonrandomized controlled trial, controlled before-and-after study, and interrupted time series analysis. We report measures of effect in the same way that the primary study authors have reported them. Due to the varied nature of interventions included in this review we could not pool data across studies. Two studies met our inclusion criteria. The findings of one study conducted in Cambodia provide low quality evidence that private contracts with international nongovernmental organizations (NGOs) for district health systems management ('contracting-in') may improve health care access and utilization. Contracting-in increased use of antenatal care by 28% and use of public facilities by 14%. However, contracting

Designing Serious Games for getting transferable skills in training settings

Directory of Open Access Journals (Sweden)

Félix Buendía-García

2014-02-01

Full Text Available Nowadays, serious games are present in almost every educational context. The current work deals with the design of serious games oriented towards getting transferable skills in different kinds of training settings. These games can be a valuable way of engaging citizens and workers in the learning process by means of metaphors or similar mechanisms close to their user experience. They also contain an encouragement factor to uptake generic job competencies. An approach is proposed to develop this type of game by mixing traditional design steps with an instructional strategy to provide structured learning bites in training settings. Several game prototypes have been developed to test this approach in the context of courses for public employees. The obtained outcomes reveal the wider possibilities of serious games as educational resources, as well as the use of game achievements to evaluate the acquisition of transferable skills.

Feasibility of Using an Arm Weight-Supported Training System to Improve Hand Function Skills in Children With Hemiplegia.

Science.gov (United States)

Krishnaswamy, Swetha; Coletti, Daniel J; Berlin, Hilary; Friel, Kathleen

This investigation was a pilot feasibility trial evaluating the use of an arm-weight-supported training device to improve upper-extremity function in children with hemiplegia. A single-group within-subject design was used. Participants were 6 children ages 7-17 yr with upper-extremity weakness secondary to hemiplegia. The intervention consisted of 15-18 treatment sessions using an arm-weight-supported training device with the affected upper extremity. Fine motor function was assessed using the Jebsen-Taylor Hand Function Test, the Box and Block Test, and the Assisting Hand Assessment. We examined participants' interactions with the device and assessment scores pre- and postintervention. Five of the 6 children exhibited some changes after the therapy. The system required significant modifications to ensure appropriate positioning. The arm-weight-supported system may be viable for therapeutic use. Future studies should use randomized controlled designs and compare effectiveness of weight-supported training with that of other rehabilitation strategies. Copyright © 2016 by the American Occupational Therapy Association, Inc.

Analysis of Train Suspension System Using MR dampers

Science.gov (United States)

RamaSastry, DVA; Ramana, K. V.; Mohan Rao, N.; Siva Kumar, SVR; Priyanka, T. G. L.

2016-09-01

This paper deals with introducing MR dampers to the Train Suspension System for improving the ride comfort of the passengers. This type of suspension system comes under Semi-active suspension system which utilizes the properties of MR fluid to damp the vibrations. In case of high speed trains, the coach body is subjected to vibrations due to vertical displacement, yaw and pitch movements. When the body receives these disturbances from the ground,the transmission of vibrations to the passenger increases which affect the ride comfort. In this work, the equations of motion of suspension system are developed for both conventional passive system and semi-active system and are modelled in Matlab/Simulink and analysis has been carried out. The passive suspension system analysis shows that it is taking more time to damp the vibrations and at the same time the transmissibility of vibrations is more.Introducing MR dampers,vertical and angular displacements of the body are computed and compared. The results show that the introduction of MR dampers into the train suspension system improves ride comfort.

Networked simulation for team training of Space Station astronauts, ground controllers, and scientists - A training and development environment

Science.gov (United States)

Hajare, Ankur R.; Wick, Daniel T.; Bovenzi, James J.

1991-01-01

The purpose of this paper is to describe plans for the Space Station Training Facility (SSTF) which has been designed to meet the envisioned training needs for Space Station Freedom. To meet these needs, the SSTF will integrate networked simulators with real-world systems in five training modes: Stand-Alone, Combined, Joint-Combined, Integrated, and Joint-Integrated. This paper describes the five training modes within the context of three training scenaries. In addition, this paper describes an authoring system which will support the rapid integration of new real-world system changes in the Space Station Freedom Program.

Observer Based Traction/Braking Control Design for High Speed Trains Considering Adhesion Nonlinearity

OpenAIRE

Cai, Wenchuan; Liao, Wenhao; Li, Danyong; Song, Yongduan

2014-01-01

Train traction/braking control, one of the key enabling technologies for automatic train operation, literally takes its action through adhesion force. However, adhesion coefficient of high speed train (HST) is uncertain in general because it varies with wheel-rail surface condition and running speed; thus, it is extremely difficult to be measured, which makes traction/braking control design and implementation of HSTs greatly challenging. In this work, force observers are applied to estimate t...

Introducing a feedback training system for guided home rehabilitation

Directory of Open Access Journals (Sweden)

Disselhorst-Klug Catherine

2010-01-01

Full Text Available Abstract As the number of people requiring orthopaedic intervention is growing, individualized physiotherapeutic rehabilitation and adequate postoperative care becomes increasingly relevant. The chances of improvement in the patients condition is directly related to the performance and consistency of the physiotherapeutic exercises. In this paper a smart, cost-effective and easy to use Feedback Training System for home rehabilitation based on standard resistive elements is introduced. This ensures high accuracy of the exercises performed and offers guidance and control to the patient by offering direct feedback about the performance of the movements. 46 patients were recruited and performed standard physiotherapeutic training to evaluate the system. The results show a significant increase in the patient's ability to reproduce even simple physiotherapeutic exercises when being supported by the Feedback Training System. Thus physiotherapeutic training can be extended into the home environment whilst ensuring a high quality of training.

Introducing a feedback training system for guided home rehabilitation.

Science.gov (United States)

Kohler, Fabian; Schmitz-Rode, Thomas; Disselhorst-Klug, Catherine

2010-01-15

As the number of people requiring orthopaedic intervention is growing, individualized physiotherapeutic rehabilitation and adequate postoperative care becomes increasingly relevant. The chances of improvement in the patients condition is directly related to the performance and consistency of the physiotherapeutic exercises.In this paper a smart, cost-effective and easy to use Feedback Training System for home rehabilitation based on standard resistive elements is introduced. This ensures high accuracy of the exercises performed and offers guidance and control to the patient by offering direct feedback about the performance of the movements.46 patients were recruited and performed standard physiotherapeutic training to evaluate the system. The results show a significant increase in the patient's ability to reproduce even simple physiotherapeutic exercises when being supported by the Feedback Training System. Thus physiotherapeutic training can be extended into the home environment whilst ensuring a high quality of training.

Effective safety training program design

International Nuclear Information System (INIS)

Chilton, D.A.; Lombardo, G.J.; Pater, R.F.

1991-01-01

Changes in the oil industry require new strategies to reduce costs and retain valuable employees. Training is a potentially powerful tool for changing the culture of an organization, resulting in improved safety awareness, lower-risk behaviors and ultimately, statistical improvements. Too often, safety training falters, especially when applied to pervasive, long-standing problems. Stepping, Handling and Lifting injuries (SHL) more commonly known as back injuries and slips, trips and falls have plagued mankind throughout the ages. They are also a major problem throughout the petroleum industry. Although not as widely publicized as other immediately-fatal accidents, injuries from stepping, materials handling, and lifting are among the leading causes of employee suffering, lost time and diminished productivity throughout the industry. Traditional approaches have not turned the tide of these widespread injuries. a systematic safety training program, developed by Anadrill Schlumberger with the input of new training technology, has the potential to simultaneously reduce costs, preserve employee safety, and increase morale. This paper: reviews the components of an example safety training program, and illustrates how a systematic approach to safety training can make a positive impact on Stepping, Handling and Lifting injuries

Corporate Training in Virtual Worlds

Directory of Open Access Journals (Sweden)

Charles Nebolsky

2004-12-01

Full Text Available This paper presents virtual training worlds that are relatively low-cost distributed collaborative learning environments suitable for corporate training. A virtual training world allows a facilitator, experts and trainees communicating and acting in the virtual environment for practicing skills during collaborative problem solving. Using these environments is beneficial to both trainees and corporations. Two system prototypes – the sales training and the leadership training virtual worlds – are described. The leadership training course design is discussed in details.

The lung cancer exercise training study: a randomized trial of aerobic training, resistance training, or both in postsurgical lung cancer patients: rationale and design

Directory of Open Access Journals (Sweden)

Crawford Jeffrey

2010-04-01

Full Text Available Abstract Background The Lung Cancer Exercise Training Study (LUNGEVITY is a randomized trial to investigate the efficacy of different types of exercise training on cardiorespiratory fitness (VO2peak, patient-reported outcomes, and the organ components that govern VO2peak in post-operative non-small cell lung cancer (NSCLC patients. Methods/Design Using a single-center, randomized design, 160 subjects (40 patients/study arm with histologically confirmed stage I-IIIA NSCLC following curative-intent complete surgical resection at Duke University Medical Center (DUMC will be potentially eligible for this trial. Following baseline assessments, eligible participants will be randomly assigned to one of four conditions: (1 aerobic training alone, (2 resistance training alone, (3 the combination of aerobic and resistance training, or (4 attention-control (progressive stretching. The ultimate goal for all exercise training groups will be 3 supervised exercise sessions per week an intensity above 70% of the individually determined VO2peak for aerobic training and an intensity between 60 and 80% of one-repetition maximum for resistance training, for 30-45 minutes/session. Progressive stretching will be matched to the exercise groups in terms of program length (i.e., 16 weeks, social interaction (participants will receive one-on-one instruction, and duration (30-45 mins/session. The primary study endpoint is VO2peak. Secondary endpoints include: patient-reported outcomes (PROs (e.g., quality of life, fatigue, depression, etc. and organ components of the oxygen cascade (i.e., pulmonary function, cardiac function, skeletal muscle function. All endpoints will be assessed at baseline and postintervention (16 weeks. Substudies will include genetic studies regarding individual responses to an exercise stimulus, theoretical determinants of exercise adherence, examination of the psychological mediators of the exercise - PRO relationship, and exercise-induced changes

Design of a gait training device for control of pelvic obliquity.

Science.gov (United States)

Pietrusinski, Maciej; Severini, Giacomo; Cajigas, Iahn; Mavroidis, Constantinos; Bonato, Paolo

2012-01-01

This paper presents the design and testing of a novel device for the control of pelvic obliquity during gait. The device, called the Robotic Gait Rehabilitation (RGR) Trainer, consists of a single actuator system designed to target secondary gait deviations, such as hip-hiking, affecting the movement of the pelvis. Secondary gait deviations affecting the pelvis are generated in response to primary gait deviations (e.g. limited knee flexion during the swing phase) in stroke survivors and contribute to the overall asymmetrical gait pattern often observed in these patients. The proposed device generates a force field able to affect the obliquity of the pelvis (i.e. the rotation of the pelvis around the anteroposterior axis) by using an impedance controlled single linear actuator acting on a hip orthosis. Tests showed that the RGR Trainer is able to induce changes in pelvic obliquity trajectories (hip-hiking) in healthy subjects. These results suggest that the RGR Trainer is suitable to test the hypothesis that has motivated our efforts toward developing the system, namely that addressing both primary and secondary gait deviations during robotic-assisted gait training may help promote a physiologically-sound gait behavior more effectively than when only primary deviations are addressed.

THEORETICAL CONTENT FOUNDATION OF PREPARING TEACHERS OF LABOR TRAINING TO TEACHING BASIS OF DESIGN

Directory of Open Access Journals (Sweden)

Ihor Savenko

2016-06-01

Full Text Available In the article the basic principles of shaping the content of training future teachers of technology education to realize design activity in schools have been considered. Formation of the basic core knowledge, abilities and skills of future teachers should be provided in the fundamental scientific, general and cultural and professional training that is subjected to certain principles of pedagogical design. Design education as a powerful educative potential aimed at designing and providing humanitarian and cultural orientation of a student has been revealed. The design is a valued feature of professional education of future teachers of labor studies and promotes the development of a special type of culture and thinking that directs to educational values and determines the individual educational strategy of professional development.

Qualification, certification and training systems of a Japanese nuclear power plant supplier

International Nuclear Information System (INIS)

Yoshijima, S.; Tomita, J.; Yoneda, Y.

1982-01-01

Training and indoctrination of personnel are very important for performing quality assurance activities in nuclear power plants. The paper presents policies, procedures and practices with regard to a training system for site construction workers, a training system for plant operation personnel at a special facility, and services and activities for operating plants. The training system for site workers and technicians offers basic training for all workers, and special training and qualification for field welders, cable-termination workers and non-destructive examination personnel. In addition to the qualification system for field welders applied by the regulatory body, a privat-company qualification system exists. Also, a training centre for BWR operators has been established. This facility has a simulator duplicating the main control room of an actual plant and a computer-assisted instruction system. Standard training courses, short-term basic courses, re-training courses, group training courses and special training courses are held at the training centre. Finally, the services and activities performed by Toshiba Corporation for operating plants are described. These activities of the plant supplier aim at keeping up and further enhancing the safety and reliability of operating plants and mainly consist of: (1) collection and evaluation of plant operation data, with re-evaluation and improvement of systems and components; (2) development of new maintenance techniques; (3) development of measures for reducing annual outage periods; and (4) plant emergency preparedness. (author)

Train-to-Ground communications of a Train Control and Monitoring Systems: A simulation platform modelling approach

DEFF Research Database (Denmark)

Bouaziz, Maha; Yan, Ying; Kassab, Mohamed

2018-01-01

wireless technologies, e.g. Wi-Fi and LTE. Different T2G scenarios are defined in order to evaluate the performances of the Mobile Communication Gateway (managing train communications) and Quality of Services (QoS) offered to TCMS applications in the context of various environments (regular train lines......Under the SAFE4RAIL project, we are developing a simulation platform based on a discrete-events network simulator. This platform models the Train-to-Ground (T2G) link in the framework of a system-level simulation of Train Control Management System (TCMS). The modelled T2G link is based on existing...

Sipa, a real time system for post-accident training and studies

International Nuclear Information System (INIS)

Peltier, J.; Poizat, F.

1990-06-01

The SIPA simulator, now under development, is designed to study in real time PWR behaviour under normal and accidental conditions. The commissioning of the version for EDF, called SIPA 1, and of the CEA version called SIPA 2 is planned in 1991. Its objectives are Shift Safety Advisors training, studies and safety analysis. Its software workshop will allow flexibility and portability. Most of the models are developed using code generators. The primary circuit is described by CATHARE-SIMU, a speeded-up version of the French advanced code CATHARE. It will be completed by about 35 connected systems developed by THOMSON-CSF and SEMA-GROUP. The computational power will be supplied by a CRAY processor that will be linked to a training network and an engineering network constituted of some independent workstations

MVPACK: a computer-aided design tool for multivariable control systems

International Nuclear Information System (INIS)

Mensah, S.; Frketich, G.

1985-10-01

The design and analysis of high-performance controllers for complex plants require a collection of interactive, powerful computer software. MVPACK, an open-ended package for the computer-aided design of control systems, has been developed in the Reactor Control Branch of the Chalk River Nuclear Laboratories. The package is fully interactive and includes a comprehensive state-of-the-art mathematical library to support development of complex, multivariable, control algorithms. Coded in RATFOR, MVPACK is portable with minimal changes. It operates with a flexible data structure which makes efficient use of minicomputer resources and provides a standard framework for program generation. The existence of a help mechanism enhances the simplicity of package utilization. This paper provides a brief tutorial overview of the package. It reviews the specifications used in the design and implementation of the package and briefly describes the database structure, supporting libraries and some design and analysis modules of MVPACK. Several application examples to illustrate the capability of the package are given. Experience with MVPACK shows that the package provides a synergistic environment for the design of control and regulation systems, and that it is a unique tool for training of control system engineers

Study of Modern Approach to Build the Functional Models of Managerial and Engineering Systems in Training Specialists for Space Industry

Directory of Open Access Journals (Sweden)

N. V. Arhipova

2016-01-01

Full Text Available The SM8 Chair at Bauman Moscow State Technological University (BMSTU trains specialists majoring not only in design and manufacture, but also in operation and maintenance of space ground-based infrastructure.The learning courses in design, production, and operation of components of the missile and space technology, give much prominence to modeling. The same attention should be given to the modeling of managerial and engineering systems, with which deal both an expert and a leadman. It is important to choose the modeling tools for managerial and engineering systems with which they are to work and to learn how to apply these tools.The study of modern approach to functional modeling of managerial and engineering systems is held in the format of business game in laboratory class. A structural analysis and design technique (IDEFØ is considered as the means of modeling.The article stresses the IDEFØ approach advantages, namely: comprehensible graphical language, applicability to all-types and all-levels-of-hierarchy managerial and engineering systems modeling, popularity, version control means, teamwork tools. Moreover, the IDEFØ allows us to illustrate such notions, as point of view, system bounders, structure, control, feedback as applied to the managerial and engineering systems.The article offers a modified procedure to create an IDEFØ model in the context of training session. It also suggests a step-by-step procedure of the instruction session to be held, as well as of student self-training to have study credits, and a procedure of the work defense (final test.The approach under consideration can be applied to other training courses. The article proves it giving information about positive experience of its application.

Design description of the Tangaye Village photovoltaic power system

Science.gov (United States)

Martz, J. E.; Ratajczak, A. F.

1982-01-01

The engineering design of a stand alone photovoltaic (PV) powered grain mill and water pump for the village of Tangaye, Upper Volta is described. The socioeconomic effects of reducing the time required by women in rural areas for drawing water and grinding grain were studied. The suitability of photovoltaic technology for use in rural areas by people of limited technical training was demonstrated. The PV system consists of a 1.8-kW (peak) solar cell array, 540 ampere hours of battery storage, instrumentation, automatic controls, and a data collection and storage system. The PV system is situated near an improved village well and supplies d.c. power to a grain mill and a water pump. The array is located in a fenced area and the mill, battery, instruments, controls, and data system are in a mill building. A water storage tank is located near the well. The system employs automatic controls which provide battery charge regulation and system over and under voltage protection. This report includes descriptions of the engineering design of the system and of the load that it serves; a discussion of PV array and battery sizing methodology; descriptions of the mechanical and electrical designs including the array, battery, controls, and instrumentation; and a discussion of the safety features. The system became operational on March 1, 1979.

Expert systems for plant operations training and assistance

International Nuclear Information System (INIS)

Pack, R.W.; Lazar, P.M.; Schmidt, R.V.; Gaddy, C.D.

1988-01-01

The project described in this paper explored the use of expert systems for plant operations training and assistance. Three computer technologies were reviewed: computer-aided instruction, expert systems, and expert training systems (ETS). The technology of CAI has been developed since the early 1960s, and a wide range of applications are available commercially today. Expert systems have been developed primarily as job performance aids, and the number of commercial applications is increasing. A fully developed ETS has models of the trainer and trainee, in addition to a knowledge base

Voltage control on a train system

Science.gov (United States)

Gordon, Susanna P.; Evans, John A.

2004-01-20

The present invention provides methods for preventing low train voltages and managing interference, thereby improving the efficiency, reliability, and passenger comfort associated with commuter trains. An algorithm implementing neural network technology is used to predict low voltages before they occur. Once voltages are predicted, then multiple trains can be controlled to prevent low voltage events. Further, algorithms for managing inference are presented in the present invention. Different types of interference problems are addressed in the present invention such as "Interference During Acceleration", "Interference Near Station Stops", and "Interference During Delay Recovery." Managing such interference avoids unnecessary brake/acceleration cycles during acceleration, immediately before station stops, and after substantial delays. Algorithms are demonstrated to avoid oscillatory brake/acceleration cycles due to interference and to smooth the trajectories of closely following trains. This is achieved by maintaining sufficient following distances to avoid unnecessary braking/accelerating. These methods generate smooth train trajectories, making for a more comfortable ride, and improve train motor reliability by avoiding unnecessary mode-changes between propulsion and braking. These algorithms can also have a favorable impact on traction power system requirements and energy consumption.

European Train Control System: A Case Study in Formal Verification

Science.gov (United States)

Platzer, André; Quesel, Jan-David

Complex physical systems have several degrees of freedom. They only work correctly when their control parameters obey corresponding constraints. Based on the informal specification of the European Train Control System (ETCS), we design a controller for its cooperation protocol. For its free parameters, we successively identify constraints that are required to ensure collision freedom. We formally prove the parameter constraints to be sharp by characterizing them equivalently in terms of reachability properties of the hybrid system dynamics. Using our deductive verification tool KeYmaera, we formally verify controllability, safety, liveness, and reactivity properties of the ETCS protocol that entail collision freedom. We prove that the ETCS protocol remains correct even in the presence of perturbation by disturbances in the dynamics. We verify that safety is preserved when a PI controlled speed supervision is used.

Social Ecology and Worksite Training and Development: Introducing the Social in Instructional System Design

Science.gov (United States)

Weinstein, Marc G.; Shuck, Brad

2011-01-01

Human resource development (HRD) is recognized as an interdisciplinary field covering the breadth of behavioral and social sciences. However, since its inception, instructional systems design (ISD), a methodology widely used in the HRD field, has been based on a narrow range of behavioral science. Grounded in general system's theory, the ISD…

An informatics system for training, examination and knowledge evaluation of the FHS personnel

International Nuclear Information System (INIS)

Pantilie, E.; Marinescu, N.

2016-01-01

The paper presents the way to implement a Fuel Handling System (FHS) data base in order to carry out an informatic system for training, examination and knowledge evaluation. The sessions, are organized as ''ebooks'' represent a way of modern learning and thoroughness, examination and assessment of the professional knowledge. The use of these lessons for personnel training, working in the FHS area, leads both to the increase of the learning quality and reduction of the time for studying activities. The student is getting the advanced professional knowledge regarding the technological equipment operation by graduating the session. This e-learning system is designed and used to keep and develop, in time, deep in knowledge, about Fuelling Machine Head construction and working, for F/M Test Rig operators and technicians, from INR Pite.ti. The e-lessons for F/M snout clamp, magazine and separators have been already implemented, the rest of materials in data base is following. (authors)

Modular Training Systems and Strategies: An International Meeting (Washington, D.C., May 11-12, 1992).

Science.gov (United States)

American Society for Training and Development, Alexandria, VA.

This publication contains materials from a conference to discuss modular approaches to curriculum design. The materials from the United States and five other countries address both national skills standards and modular systems of training delivery. An introduction provides brief summaries of the conference materials and the agenda. "National…

Training and Maintaining System-Wide Reliability in Outcome Management.

Science.gov (United States)

Barwick, Melanie A; Urajnik, Diana J; Moore, Julia E

2014-01-01

The Child and Adolescent Functional Assessment Scale (CAFAS) is widely used for outcome management, for providing real time client and program level data, and the monitoring of evidence-based practices. Methods of reliability training and the assessment of rater drift are critical for service decision-making within organizations and systems of care. We assessed two approaches for CAFAS training: external technical assistance and internal technical assistance. To this end, we sampled 315 practitioners trained by external technical assistance approach from 2,344 Ontario practitioners who had achieved reliability on the CAFAS. To assess the internal technical assistance approach as a reliable alternative training method, 140 practitioners trained internally were selected from the same pool of certified raters. Reliabilities were high for both practitioners trained by external technical assistance and internal technical assistance approaches (.909-.995, .915-.997, respectively). 1 and 3-year estimates showed some drift on several scales. High and consistent reliabilities over time and training method has implications for CAFAS training of behavioral health care practitioners, and the maintenance of CAFAS as a global outcome management tool in systems of care.

Decision process simulation in training systems

International Nuclear Information System (INIS)

Zajtsev, K.S.; Serov, A.A.; Ajnutdinov, V.A.

1984-01-01

One of the approaches to arrangement of training process an automated trainning systems (ATS) based on actjve use of knowledge of experienced operators is presented. Problems of mathematical model simulatjon of decision process by people not having special knowledge in mathematics are considered. A language of solution tables based on indistinct tables is suggested to the used as a simulation language. The problem of automation of decision process simulation in ATS is solued

Spaceflight Systems Training: A Comparison and Contrasting of Techniques for Training Ground Operators and Onboard Crewmembers

Science.gov (United States)

Balmain, Clinton; Fleming, Mark

2009-01-01

When developing techniques and products for instruction on manned spaceflight systems, training organizations are often faced with two very different customers: ground operators and onboard crewmembers. Frequently, instructional development focuses on one of these customers with the assumption that the other s needs will be met by default. Experience teaches us that differing approaches are required when developing training tailored to the specific needs of each customer. As a rule, ground operators require focused instruction on specific areas of expertise. Their knowledge should be of the details of the hardware, software, and operational techniques associated with that system. They often benefit from historical knowledge of how their system has operated over its lifetime. Since several different ground operators may be interfacing with the same system, each individual operator must understand the agreed-to principles by which that system will be run. In contrast, onboard crewmembers require a more broad, hands-on awareness of their operational environment. Their training should be developed with an understanding of the physical environment in which they live and work and the day-to-day tasks they are most likely to perform. Rarely do they require a deep understanding of the details of a system; it is often sufficient to teach them just enough to maintain situational awareness and perform basic tasks associated with maintenance and operation of onboard systems. Crewmembers may also develop unique onboard operational techniques that differ from preceding crews. They should be taught what flexibility they have in systems operations and how their specific habits can be communicated to ground support personnel. This paper will explore the techniques that can be employed when developing training for these unique customers. We will explore the history of International Space Station training development and how past efforts can guide us in creating training for users of

A Data Management System Integrating Web-based Training and Randomized Trials: Requirements, Experiences and Recommendations.

Science.gov (United States)

Muroff, Jordana; Amodeo, Maryann; Larson, Mary Jo; Carey, Margaret; Loftin, Ralph D

2011-01-01

This article describes a data management system (DMS) developed to support a large-scale randomized study of an innovative web-course that was designed to improve substance abuse counselors' knowledge and skills in applying a substance abuse treatment method (i.e., cognitive behavioral therapy; CBT). The randomized trial compared the performance of web-course-trained participants (intervention group) and printed-manual-trained participants (comparison group) to determine the effectiveness of the web-course in teaching CBT skills. A single DMS was needed to support all aspects of the study: web-course delivery and management, as well as randomized trial management. The authors briefly reviewed several other systems that were described as built either to handle randomized trials or to deliver and evaluate web-based training. However it was clear that these systems fell short of meeting our needs for simultaneous, coordinated management of the web-course and the randomized trial. New England Research Institute's (NERI) proprietary Advanced Data Entry and Protocol Tracking (ADEPT) system was coupled with the web-programmed course and customized for our purposes. This article highlights the requirements for a DMS that operates at the intersection of web-based course management systems and randomized clinical trial systems, and the extent to which the coupled, customized ADEPT satisfied those requirements. Recommendations are included for institutions and individuals considering conducting randomized trials and web-based training programs, and seeking a DMS that can meet similar requirements.

Virtual design software for mechanical system dynamics using transfer matrix method of multibody system and its application

Directory of Open Access Journals (Sweden)

Hai-gen Yang

2015-09-01

Full Text Available The complex mechanical systems such as high-speed trains, multiple launch rocket system, self-propelled artillery, and industrial robots are becoming increasingly larger in scale and more complicated in structure. Designing these products often requires complex model design, multibody system dynamics calculation, and analysis of large amounts of data repeatedly. In recent 20 years, the transfer matrix method of multibody system has been widely applied in engineering fields and welcomed at home and in abroad for the following features: without global dynamic equations of the system, low orders of involved system matrices, high computational efficiency, and high programming. In order to realize the rapid and visual simulation for complex mechanical system virtual design using transfer matrix method of multibody system, a virtual design software named MSTMMSim is designed and implemented. In the MSTMMSim, the transfer matrix method of multibody system is used as the solver for dynamic modeling and calculation; the Open CASCADE is used for solid geometry modeling. Various auxiliary analytical tools such as curve plot and animation display are provided in the post-processor to analyze and process the simulation results. Two numerical examples are given to verify the validity and accuracy of the software, and a multiple launch rocket system engineering example is given at the end of this article to show that the software provides a powerful platform for complex mechanical systems simulation and virtual design.

The twilight of the training analysis system.

Science.gov (United States)

Kernberg, Otto F

2014-04-01

This paper briefly reviews challenges to psychoanalysis at this time, including those derived from both external, societal origins and internal psychoanalytic problems. It focuses attention on serious conflicts around psychoanalytic education, and refers to the training analysis system as a central problem determining fundamental constraints on present-day psychoanalytic education. These constraints are examined in some detail, and the general advantages and disadvantages of the training analysis system are outlined. The effects of all these dynamics on the administrative organization of the American Psychoanalytic Association are explored, and a proposal for a fundamental reorganization of our educational system to resolve the correspondent problems is outlined.

Development of Decision-making Support System to Determine the Feasibility of the Job Training Industry Using Simple Additive Weighting Method

Directory of Open Access Journals (Sweden)

Kaisah Riski Zubaeti

2017-10-01

Full Text Available The activities of the job training is an activity that must be implemented at Vocational Secondary School. The lack of utilization of technology on such activities in Vocational Secondary School,  so the data management of the job training become less effective and efficient. Therefore, it is necessary the information system for manage the data on the job training and produces the decision support of the decent industry of the job training as a result of the evaluation of the job training. This research has a goal to produce decision support system to determine the feasibility of the job training industry (SPK-KTP, measure the feasibility of the system, and produce a decision support using a Simple Additive Weighting (SAW method. The information system can help the school to manage the administration on the job training, recap the daily journal, recap the reports in pursuit, and provide decision support the job training of decent industry used in the next period. SPK-KTP uses SAW method to produce decision support the job training of decent industry. SPK-KTP is the web-based information system which it is developed using the programming language PHP (Hypertext Preprocessor. This information system uses The Waterfall Model as its system development method. The steps of The Waterfall Model consists of Analysis, Design, Code, and Test. SPK-KTP has done testing to an expert of the information system with value 90,7%, an expert of the substance of the job training with value  91,6%, supervising teachers with value 83,3%, and learners with value 90,6%. Based on the result, so SPK-KTP is very decent to use.

Group attributional training as an effective approach to human resource development under team work systems.

Science.gov (United States)

Wang, Z M

1994-07-01

An experimental programme of group attributional training under team work system was conducted as part of human resource development in Chinese industrial enterprises. One hundred and ten shopfloor employees participated in the study. Among them, 58 employees took part in the factorial-designed experiment to find out the effects of attributions on performance, and 52 employees of ten work groups participated in the group attributional training programme twice a week for two months. The results showed that the group attributional training was effective in modifying employees' attributional patterns and enhancing group performance and satisfaction. On the basis of the results, an attributional model of work motivation is proposed, and its theoretical and practical implications for human resource management discussed.

Technological sequence of creating components of the training system of the future officers to the management of physical training

Directory of Open Access Journals (Sweden)

Olkhovy O.M.

2012-09-01

Full Text Available The goal is to determine constructive ways of sequence of constructing components of the training system of the future officers to carry out official questions of managing the physical training in the process of the further military career. The structural logic circuit of the interconnections stages of optimum cycle management and technological sequence of constructing the components of the training system of the future officers to the management of physical training, which provides: definition of requirements to the typical problems of professional activities on the issues of the leadership, organization and conducting of physical training, the creation of the phased system model cadets training, training of the curriculum discipline ″Physical education, special physical training and sport″; model creation and definition of criteria of the integral evaluation of the readiness of the future officers to the management of physical training was determined through the analysis more than thirty documentary and scientific literature.

Training of Teachers and Teaching Services Specialists for the Design and Implementation of the "School Psychology Master Program

Directory of Open Access Journals (Sweden)

Maksimova L.A.

2015-11-01

Full Text Available The article presents the experience of organizing the training courses for teachers and teaching services specialists for design and implementation of the basic professional educational pedagogical master program in a psycho-pedagogical training direction (educational psychologist with enhanced internship for students in a context of networking. The authors submit a modular design of training program. The first module includes methodological bases of the design and implementation of the basic professional educational master program. The second module includes legal coverage of the design and implementation of the basic professional educational master program. The third module consists of design and implementation of the basic professional educational master program in a psycho-pedagogical training direction (educational psychologist. The program involves a variety of active and interactive educational technology, providing the development of professional activities: remote technology, expert seminars, design stations, panels and plenary discussions, business games, round-table discussions.