WorldWideScience

Sample records for training process reduction

  1. Training smarter: Refocus through reduction

    International Nuclear Information System (INIS)

    Durham, L.B.

    1991-01-01

    In this era of ever increasing operations and maintenance (O and M) costs, the Tennessee Valley Authority (TVA) like most other nuclear utilities, has been faced with the problem of reducing its overhead costs while at the same time maintaining its commitment to providing effective training. Due in part to the extended shutdown of its operating nuclear plants (Sequoyah and Browns Ferry Nuclear Plants) and faced with continued delays in its construction programs at the Watts Bar and Bellefonte Nuclear Plants, TVA had relied on an expanded complement of personnel in all facets of its nuclear program to get back on track and operating once again. Nuclear Training was no exception. At one point in the recovery process (1988), Nuclear Training had an authorized manpower level of 573. Faced with spiraling O and M costs, potential loss of long-term customers to neighboring utilities, and enormous outstanding debt, TVA management responded by setting goals that included becoming the best electric utility in North America and the most productive and effective agency in the Federal government. Operating TVA like a business became second only to safety as a managerial objective. Accountability for planning ahead, achieving goals, and operating within authorized budgets became a way of life. Work forces were reduced significantly including reduction of Nuclear Training's complement to 203. In spite of the importance of training to a nuclear utility, Nuclear Training was not immune to such sweeping changes. Program scope was refocused on accredited and regulatory training. The purpose of this paper is to explain the major elements of this revitalization program

  2. Process energy reduction

    International Nuclear Information System (INIS)

    Lowthian, W.E.

    1993-01-01

    Process Energy Reduction (PER) is a demand-side energy reduction approach which complements and often supplants other traditional energy reduction methods such as conservation and heat recovery. Because the application of PER is less obvious than the traditional methods, it takes some time to learn the steps as well as practice to become proficient in its use. However, the benefit is significant, often far outweighing the traditional energy reduction approaches. Furthermore, the method usually results in a better process having less waste and pollution along with improved yields, increased capacity, and lower operating costs

  3. Dilemmas in the process of weight reduction: Exploring how women experience training as a means of losing weight

    Directory of Open Access Journals (Sweden)

    Karen Synne Groven

    2010-04-01

    Full Text Available Patients diagnosed with obesity are usually offered group-based behavior interventions which include dietary advice and exercise programs. In particular, high-intensity training—combining weight lifting with aerobic exercising—has been proven effective for losing weight. Moreover, recent studies have shown that persons participating in high-intensity training are more likely to maintain their weight loss compared to persons with lower levels of physical activity. However, most of the research in the field has made use of quantitative methods focusing on the measurable effect of such interventions. Therefore, the aim of this study was to show how the training is experienced from a first-person perspective, namely the patients themselves. Our hope was to shed some new light on the process of weight loss that concerns more than the measurable “impacts” of the training. A qualitative approach was used based on interviews with five women selected from a primary healthcare clinic in Norway. Our results show that experiences of training are connected to the participants’ general experience of being overweight. Both relationships to other people and earlier experiences are important for how the training is carried out and perceived. Five themes were identified supporting this line of argument: (1 the gaze of others; (2 a common ground; (3 dependence of close-follow up; (4 bodily discomfort as painful; and (5 aiming for results—an ambivalent experience. The results highlight the importance of finding the proper context and support for each patient's needs.

  4. Electrochemical Reduction Process for Pyroprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Eun-Young; Hong, Sun-Seok; Park, Wooshin; Im, Hun Suk; Oh, Seung-Chul; Won, Chan Yeon; Cha, Ju-Sun; Hur, Jin-Mok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-06-15

    Nuclear energy is expected to meet the growing energy demand while avoiding CO{sub 2} emission. However, the problem of accumulating spent fuel from current nuclear power plants which is mainly composed of uranium oxides should be addressed. One of the most practical solutions is to reduce the spent oxide fuel and recycle it. Next-generation fuel cycles demand innovative features such as a reduction of the environmental load, improved safety, efficient recycling of resources, and feasible economics. Pyroprocessing based on molten salt electrolysis is one of the key technologies for reducing the amount of spent nuclear fuel and destroying toxic waste products, such as the long-life fission products. The oxide reduction process based on the electrochemical reduction in a LiCl-Li{sub 2}O electrolyte has been developed for the volume reduction of PWR (Pressurized Water Reactor) spent fuels and for providing metal feeds for the electrorefining process. To speed up the electrochemical reduction process, the influences of the feed form for the cathode and the type of anode shroud on the reduction rate were investigated.

  5. Dimensional Reduction and Hadronic Processes

    International Nuclear Information System (INIS)

    Signer, Adrian; Stoeckinger, Dominik

    2008-01-01

    We consider the application of regularization by dimensional reduction to NLO corrections of hadronic processes. The general collinear singularity structure is discussed, the origin of the regularization-scheme dependence is identified and transition rules to other regularization schemes are derived.

  6. Why Process Improvement Training Fails

    Science.gov (United States)

    Lu, Dawei; Betts, Alan

    2011-01-01

    Purpose: The purpose of this paper is to explore the underlying reasons why providing process improvement training, by itself, may not be sufficient to achieve the desired outcome of improved processes; and to attempt a conceptual framework of management training for more effective improvement. Design/methodology/approach: Two similar units within…

  7. State of the direct reduction and reduction smelting processes

    Directory of Open Access Journals (Sweden)

    Markotić A.

    2002-01-01

    Full Text Available For quite a long time efforts have been made to develop processes for producing iron i.e. steel without employing conventional procedures - from ore, coke, blast furnace, iron, electric arc furnace, converter to steel. The insufficient availability and the high price of the coking coals have forced many countries to research and adopt the non-coke-consuming reduction and metal manufacturing processes (non-coke metallurgy, direct reduction, direct processes. This paper represents a survey of the most relevant processes from this domain by the end of 2000, which display a constant increase in the modern process metallurgy.

  8. Determination of reduction yield of lithium metal reduction process

    International Nuclear Information System (INIS)

    Choi, In Kyu; Cho, Young Hwan; Kim, Taek Jin; Jee, Kwang Young

    2004-01-01

    Metal reduction of spent oxide fuel is the first step for the effective storage of spent fuel in Korea as well as transmutation purpose of long-lived radio-nuclides. During the reduction of uranium oxide by lithium metal to uranium metal, lithium oxide is stoichiometrically produced. By determining the concentration of lithium oxide in lithium chloride, we can estimate that how much uranium oxide is converted to uranium metal. Previous method to determine the lithium oxide concentration in lithium chloride is tedious and timing consuming. This paper describe the on-line monitoring method of lithium oxide during the reduction process

  9. Managing the training process in bodybuilding

    OpenAIRE

    Netík, Tomáš

    2011-01-01

    Anotation Title: Managing the training process in bodybuilding This thesis describes the sport of bodybuilding and its training process. It also describes aspects of managing the training process and based on own research determines what impact the training process is applied to changes in the state of training and performance. There is also considering the impact of specific training methods and intensification. In the research of this thesis, we used different testing methods. We performed ...

  10. Advanced digital signal processing and noise reduction

    CERN Document Server

    Vaseghi, Saeed V

    2008-01-01

    Digital signal processing plays a central role in the development of modern communication and information processing systems. The theory and application of signal processing is concerned with the identification, modelling and utilisation of patterns and structures in a signal process. The observation signals are often distorted, incomplete and noisy and therefore noise reduction, the removal of channel distortion, and replacement of lost samples are important parts of a signal processing system. The fourth edition of Advanced Digital Signal Processing and Noise Reduction updates an

  11. The planning of training process in triathlon

    Directory of Open Access Journals (Sweden)

    Volodymyr Vodlozerov

    2016-04-01

    Full Text Available Purpose: is the working out of base variant of training process as the base for planning of individual training of triathlete. Material & Methods: studying and generalization of special literature of basis training process for endurance in cyclic kinds of sports, the analysis of training of famous triathletes to competitions. Results: mane stages of training process formation in triathlon and features of distribution of sportsman’s training load in depending on period of training were considered. Conclusions: comprehensive planning of training process in different kinds of triathlon is lying down in basis of improving of competition form of triathlete.

  12. Training process for foreign women.

    Directory of Open Access Journals (Sweden)

    Carlotta Malfone

    2006-01-01

    Full Text Available This article analyses some strategies for the training process of foreign women. Several establishments must cooperate in this process (universities, unions, industrial associations, local councils not only to support job seeking initiatives but also to help these women move up towards more qualified work. The projects aimed at this are sporadic and marginal, lacking in finances because they are entirely focussed on job seeking schemes, and do not aim at helping women overcome their initial disadvantage. The result is not a qualifying training experience but merely a basic duty. Foreign women do not aspire just to dignified work but above all they wish to reach social recognition in order to benefit from all citizen rights yet maintain their personal identity through and through. We find basic fault already in the fact that the receiving country does not take into consideration the education of these women acquired in their countries. Actually, we do not find attempt to check, evaluate and improve the women’s starting qualifications. In the Italian job market, it is still impossible to ratify the qualifications of each new foreign woman. It is therefore necessary to act in many different ways in order to take care of the cultural needs of each ethnic group, so that these women could have options between different ways of life in order to get a positive introduction into the “new” country. It is necessary to create careful flexible courses for each need. Since women immigrants come from different nations, have different levels of instruction, have had different jobs, homes and relations with justice, our model of professional training must be reorganised in order to meet the real needs of these women. To this end, the education and re-training strategies must follow a careful analysis of the women’s living and working conditions, not only in consideration of their bureaucratic needs, but above all in consideration of the addressee

  13. Training change control process at Cernavoda NPP

    International Nuclear Information System (INIS)

    Valache, Cornelia Mariana

    2005-01-01

    The paper presents the process of 'Training Change Control' at Cernavoda NPP. This process is a systematic approach that allows determination of the most effective training and/or non-training solutions for challenges that may influence the content and conditions for a training program or course. Changes may be the result of: - response to station systems or equipment modifications; - new or revised procedures; - regulatory requirements; - external organizations requirements; - internal evaluations meaning feedback from trainees, trainers, management or post-training evaluations; - self-assessments; - station condition reports; - operating experience (OPEX); - modifications of job scope; - management input. The Training Change Control Process at Cernavoda NPP includes the following aspects. The first step is the identification of all the initiating factors for a potential training change. Then, retain only those, which could have an impact on training and classify them in two categories: as deficiencies or as enhancement suggestions. The process is different for the two categories. The deficiency category supposes the application of the Training Needs Analysis (TNA) process. This is a performance-oriented process, resulting in more competent employees, solving existing and potential performance problems. By using needs analysis to systematically determine what people or courses and programs are expected to do and gathering data to reveal what they are really doing, we can receive a clear picture of the problem and then we can establish corrective action plans to fix it. The process is supported by plant subjects matter and by training specialists. On the other hand, enhancements suggestions are assessed by designated experienced persons and then are implemented in the training process. Regarding these two types of initiating factors for the training change control process, the final result consists of a training improvement, raising the effectiveness, efficiency or

  14. Proliferation resistance of the lithium reduction process

    International Nuclear Information System (INIS)

    Ko, W. I.; Ha, J. H.; Lee, S. Y.; Song, D. Y.; Kim, H. D.; Park, S. W.

    2002-01-01

    This paper addresses the characteristics of proliferation resistance of the lithium reduction process and international domestic safeguarding methods. In addition to dealing with qualitative features of the proliferation resistance, this study is emphasizing on the quantitative analysis of radiation barrier, which could be a significant accessibility barrier if the field is high enough to force a theft to shield the object during a theft. From the radiation barrier analysis, it is indicated that whole-body radiation dose is about 20 rem/hr at one meter of smelt and ingot metal of 40 kgHM, which could be considered to be a significant reduction in risk of theft. For safeguarding of this process, we propose a NDA concept for nuclear material accounting which is to measure the amount of curium in the reduction metal and associated process samples using a neutron coincidence counter and then to convert the curium mass into special nuclear material with predetermined curium ratios. For this, a well-type neutron coincidence counter with substantial shielding to protect the system from high gamma radiation is conceptually designed

  15. Energy consumption in smelting reduction (SR) processes

    International Nuclear Information System (INIS)

    Assis, Paulo Santos; Salierno, Giovanni Felice; Fang, Jue; Mankhand, Tilak R.; Assis, Carlos Frederico Campos de

    2010-01-01

    In contrast, conventional processes use coke and hematite/sinter in the blast furnace, in SR processes, other alternative fuels and iron ore sources, like charcoal and fine iron ores, can be used to produce sponge iron. The use of these alternative sources, by SR processes, can reduce environmental impacts and lower production costs. At first, the concepts of the theoretical gas utilization ratio, the smelting heat of the iron ore and the effective calorific value of coal were introduced. Then, the reason for gas utilization ratio and its performance in the shaft as a reducer in the smelting process are discussed and calculated. The relationship between coal consumption and iron ore reduction in the fluidized bed are also discussed. Finally, the influence of post-combustion on coal consumption in an iron bath furnace are calculated and discussed. (author)

  16. Occupational Noise Reduction in CNC Striping Process

    Science.gov (United States)

    Mahmad Khairai, Kamarulzaman; Shamime Salleh, Nurul; Razlan Yusoff, Ahmad

    2018-03-01

    Occupational noise hearing loss with high level exposure is common occupational hazards. In CNC striping process, employee that exposed to high noise level for a long time as 8-hour contributes to hearing loss, create physical and psychological stress that reduce productivity. In this paper, CNC stripping process with high level noises are measured and reduced to the permissible noise exposure. First condition is all machines shutting down and second condition when all CNC machine under operations. For both conditions, noise exposures were measured to evaluate the noise problems and sources. After improvement made, the noise exposures were measured to evaluate the effectiveness of reduction. The initial average noise level at the first condition is 95.797 dB (A). After the pneumatic system with leakage was solved, the noise reduced to 55.517 dB (A). The average noise level at the second condition is 109.340 dB (A). After six machines were gathered at one area and cover that area with plastic curtain, the noise reduced to 95.209 dB (A). In conclusion, the noise level exposure in CNC striping machine is high and exceed the permissible noise exposure can be reduced to acceptable levels. The reduction of noise level in CNC striping processes enhanced productivity in the industry.

  17. Decision process simulation in training systems

    International Nuclear Information System (INIS)

    Zajtsev, K.S.; Serov, A.A.; Ajnutdinov, V.A.

    1984-01-01

    One of the approaches to arrangement of training process an automated trainning systems (ATS) based on actjve use of knowledge of experienced operators is presented. Problems of mathematical model simulatjon of decision process by people not having special knowledge in mathematics are considered. A language of solution tables based on indistinct tables is suggested to the used as a simulation language. The problem of automation of decision process simulation in ATS is solued

  18. Auditory Training for Children with Processing Disorders.

    Science.gov (United States)

    Katz, Jack; Cohen, Carolyn F.

    1985-01-01

    The article provides an overview of central auditory processing (CAP) dysfunction and reviews research on approaches to improve perceptual skills; to provide discrimination training for communicative and reading disorders; to increase memory and analysis skills and dichotic listening; to provide speech-in-noise training; and to amplify speech as…

  19. Specific features of elite bodybuilders’ training process in competition period

    Directory of Open Access Journals (Sweden)

    A.A. Tihorsky

    2016-12-01

    Full Text Available Purpose: To substantiate methodic of training process construction for elite bodybuilders in competition period with usage of different training methods. Material: elite bodybuilders - members of combined team of Ukraine (n=16 participated in the research. Results: we presented comparative characteristic of the most often used bodybuilding training methodic. Besides, optimal training methodic in competition period was worked out and substantiated. Such methodic permits to improve body proportions at the account of fat layer reduction. By the data of Harvard step-test the sportsmen improved organism’s functional potentials by 6%. Conclusions: the offered methodic noticeably reduces probability of functional unfavorable states (over-training, overloading, traumas. The methodic permits to achieve the required sport form without over-tension adaptation-compensatory mechanisms and acquire maximal muscular relief; improve proportions with minimal losses of muscles’ volume.

  20. Forging process design for risk reduction

    Science.gov (United States)

    Mao, Yongning

    In this dissertation, forging process design has been investigated with the primary concern on risk reduction. Different forged components have been studied, especially those ones that could cause catastrophic loss if failure occurs. As an effective modeling methodology, finite element analysis is applied extensively in this work. Three examples, titanium compressor disk, superalloy turbine disk, and titanium hip prosthesis, have been discussed to demonstrate this approach. Discrete defects such as hard alpha anomalies are known to cause disastrous failure if they are present in those stress critical components. In this research, hard-alpha inclusion movement during forging of titanium compressor disk is studied by finite element analysis. By combining the results from Finite Element Method (FEM), regression modeling and Monte Carlo simulation, it is shown that changing the forging path is able to mitigate the failure risk of the components during the service. The second example goes with a turbine disk made of superalloy IN 718. The effect of forging on microstructure is the main consideration in this study. Microstructure defines the as-forged disk properties. Considering specific forging conditions, preform has its own effect on the microstructure. Through a sensitivity study it is found that forging temperature and speed have significant influence on the microstructure. In order to choose the processing parameters to optimize the microstructure, the dependence of microstructure on die speed and temperature is thoroughly studied using design of numerical experiments. For various desired goals, optimal solutions are determined. The narrow processing window of titanium alloy makes the isothermal forging a preferred way to produce forged parts without forging defects. However, the cost of isothermal forging (dies at the same temperature as the workpiece) limits its wide application. In this research, it has been demonstrated that with proper process design, the die

  1. The Training Process of the Organization Development and Training Office

    Science.gov (United States)

    Johnson, Melissa S.

    2004-01-01

    read and summarized to determine the effectiveness of the class and instructor. In addition to the SOAR workshops, I have several projects and daily tasks to complete. Coding training applications, which require me to be familiar with Glenn s budgetary allocations and policies on training, is an ongoing process. It also requires verifying information reported by an employee via her C-478 form, more commonly known as the training application. I am also the point of contact for the Cuyahoga Community College Advising Sessions held here at NASA Glenn which involves coordinating counselors visits with employees schedules. Two databases had to be created. The first database holds information on administrative staff, and the other tracks supervisors training histories. Through these assignments I gained experience in Microsoft Access 2002 and spreadsheet creation, communicating with co-workers, and successfully facilitating a training to serve specific purposes. With trainings and evaluations to assessment them, the Organization Development and Training Office can assure a quality product and continued customer satisfaction.

  2. Processing of effluent salt from the direct oxide reduction process

    International Nuclear Information System (INIS)

    Mishra, B.; Olson, D.L.

    1992-01-01

    The production of reactive metals by Direct Oxide Reduction (DOR) process using calcium in a molten calcium salt system generates significant amount of contaminated waste as calcium oxide saturated calcium chloride salt mix with calcium oxide content of up to 15 wt. pct. Fused salt electrolysis of a simulated salt mix has been carried out to electrowin calcium, which can be recycled to the DOR reactor along with the calcium chloride salt or may be used in-situ in a combined DOR and electrowinning process. Many reactive metal oxides could thus be reduced in a one-step process without generating a significant amount of waste. The process has been optimized in terms of the calcium solubility, cell temperature, current density and the cell design to maximize the current efficiency. Based on the information available regarding the solubility of calcium in calcium chloride salt in the presence of calcium oxide, and the back reactions occurring in-situ between the electrowon calcium and other components present in the cell, e.g. carbon, oxygen, carbon dioxide and calcium oxide, it is difficult to recover elemental calcium within the system. However, a liquid cathode or a rising cathode has been used in the past to recover calcium. The solubility has also been found to depend on the use of graphite as the anode material as evidenced by the presence of calcium carbonate in the final salt. The rate of recovery for metallic calcium has to be enhanced to levels that overcome the back reactions in a system where quick removal of anodic gases is achieved. Calcium has been detected by the hydrogen evolution technique and the amount of calcia has been determined by titration. A porous ceramic sheath has been used in the cell to prevent the chemical reaction of electrowon calcium to produce oxide or carbonate and to prevent the contamination of salt by the anodic carbon

  3. Training in the Context of a Reduction in Working Hours.

    Science.gov (United States)

    Trautmann, Jacques

    2001-01-01

    Discusses the increased importance of training to employers, the need to manage training time efficiently, and the impact of legislation regulated training leave in France. Finds the beginnings of a shift of training from work time to leisure time. (Contains 19 references.) (SK)

  4. A Process for the Evaluation of Training.

    Science.gov (United States)

    Civil Service Commission, Washington, DC. Training Leadership Div.

    The process of evaluating the training of federal civil service employees is summarized in three phases: (1) the focus--establishing the scope and objectives of the evaluation effort, (2) the plan--developing a blueprint for conducting the project, and (3) the implementation--obtaining necessary data, interpreting them, and providing conclusions…

  5. Combined Acquisition/Processing For Data Reduction

    Science.gov (United States)

    Kruger, Robert A.

    1982-01-01

    Digital image processing systems necessarily consist of three components: acquisition, storage/retrieval and processing. The acquisition component requires the greatest data handling rates. By coupling together the acquisition witn some online hardwired processing, data rates and capacities for short term storage can be reduced. Furthermore, long term storage requirements can be reduced further by appropriate processing and editing of image data contained in short term memory. The net result could be reduced performance requirements for mass storage, processing and communication systems. Reduced amounts of data also snouid speed later data analysis and diagnostic decision making.

  6. Uranium manufacturing process employing the electrolytic reduction method

    International Nuclear Information System (INIS)

    Oda, Yoshio; Kazuhare, Manabu; Morimoto, Takeshi.

    1986-01-01

    The present invention related to a uranium manufacturing process that employs the electrolytic reduction method, but particularly to a uranium manufacturing process that employs an electrolytic reduction method requiring low voltage. The process, in which uranium is obtained by means of the electrolytic method and with uranyl acid as the raw material, is prior art

  7. Defective Reduction in Frozen Pie Manufacturing Process

    Science.gov (United States)

    Nooted, Oranuch; Tangjitsitcharoen, Somkiat

    2017-06-01

    The frozen pie production has a lot of defects resulting in high production cost. Failure mode and effect analysis (FMEA) technique has been applied to improve the frozen pie process. Pareto chart is also used to determine the major defects of frozen pie. There are 3 main processes that cause the defects which are the 1st freezing to glazing process, the forming process, and the folding process. The Risk Priority Number (RPN) obtained from FMEA is analyzed to reduce the defects. If RPN of each cause exceeds 45, the process will be considered to be improved and selected for the corrective and preventive actions. The results showed that RPN values decreased after the correction. Therefore, the implementation of FMEA technique can help to improve the performance of frozen pie process and reduce the defects approximately 51.9%.

  8. EMG Biofeedback Training Versus Systematic Desensitization for Test Anxiety Reduction

    Science.gov (United States)

    Romano, John L.; Cabianca, William A.

    1978-01-01

    Biofeedback training to reduce test anxiety among university students was investigated. Biofeedback training with systematic desensitization was compared to an automated systematic desensitization program not using EMG feedback. Biofeedback training is a useful technique for reducing test anxiety, but not necessarily more effective than systematic…

  9. NOx reduction by compact electron beam processing

    International Nuclear Information System (INIS)

    Penetrante, B.M.; Hsiao, M.C.; Merritt, B.T.; Wallman, P.H.; Vogtlin, G.E.

    1995-01-01

    Among the new methods being investigated for the post-combustion removal of nitrogen oxides (NO x ) are based on non-thermal plasmas. These plasmas can be produced by electrical discharge methods or electron beam irradiation. The application of electron beam irradiation for NO x removal in power plant flue gases has been investigated since the early 1970's in both laboratory- and pilot-scale experiments. Electrical discharge methods are relatively new entrants in the field of flue gas cleanup. Pulsed corona and dielectric-barrier discharge techniques are two of the more commonly used electrical discharge methods for producing nonthermal plasmas at atmospheric pressure. There are basically two types of reactions responsible for the depletion of NO by non-thermal plasmas: oxidation and reduction

  10. Bomb reduction of uranium tetrafluoride. Part II: Influence of the addition elements in the reduction process

    International Nuclear Information System (INIS)

    Anca Abati, R.; Lopez Rodriguez, M.

    1962-01-01

    This work shows the influence of uranium oxide and uranyl fluoride in the reduction of uranium with Ca and Mg. These additions are more harmful when using smaller bombs. The uranyl fluoride has influence in the reduction process; the curves yield-concentration shows two regions depending upon the salt concentration. The behaviour of this addition in these regions can be explained following the different decompositions that can take place during the reduction process. (Author) 9 refs

  11. Application of lithium in molten-salt reduction processes

    International Nuclear Information System (INIS)

    Gourishankar, K. V.

    1998-01-01

    Metallothermic reductions have been extensively studied in the field of extractive metallurgy. At Argonne National Laboratory (ANL), we have developed a molten-salt based reduction process using lithium. This process was originally developed to reduce actinide oxides present in spent nuclear fuel. Preliminary thermodynamic considerations indicate that this process has the potential to be adapted for the extraction of other metals. The reduction is carried out at 650 C in a molten-salt (LiCl) medium. Lithium oxide (Li 2 O), produced during the reduction of the actinide oxides, dissolves in the molten salt. At the end of the reduction step, the lithium is regenerated from the salt by an electrowinning process. The lithium and the salt from the electrowinning are then reused for reduction of the next batch of oxide fuel. The process cycle has been successfully demonstrated on an engineering scale in a specially designed pyroprocessing facility. This paper discusses the applicability of lithium in molten-salt reduction processes with specific reference to our process. Results are presented from our work on actinide oxides to highlight the role of lithium and its effect on process variables in these molten-salt based reduction processes

  12. Training and dual processes in human thinking

    OpenAIRE

    Neilens, Helen Louise

    2005-01-01

    The aim of the research presented in this thesis was to investigate the effects of trainin- on reasoning and decision making performance. In Experiment Ia study is reported which examined the relationships between performance on a variety of reasoning tasks and measures of individual differences. Tasks employed were documented in the literature for their differential responding according to heuristic and analytic processes. The reasoning tasks to be utilised in the training stu...

  13. Complex diffusion process for noise reduction

    DEFF Research Database (Denmark)

    Nadernejad, Ehsan; Barari, A.

    2014-01-01

    equations (PDEs) in image restoration and de-noising prompted many researchers to search for an improvement in the technique. In this paper, a new method is presented for signal de-noising, based on PDEs and Schrodinger equations, named as complex diffusion process (CDP). This method assumes that variations...... for signal de-noising. To evaluate the performance of the proposed method, a number of experiments have been performed using Sinusoid, multi-component and FM signals cluttered with noise. The results indicate that the proposed method outperforms the approaches for signal de-noising known in prior art....

  14. Hybrid process for nitrogen oxides reduction

    Energy Technology Data Exchange (ETDEWEB)

    Epperly, W.R.; Sprague, B.N.

    1991-09-10

    This patent describes a process for reducing the nitrogen oxide concentration in the effluent from the combustion of a carbonaceous fuel. It comprises introducing into the effluent a first treatment agent comprising a nitrogenous composition selected from the group consisting of urea, ammonia, hexamethylenetetramine, ammonium salts of organic acids, 5- or 6-membered heterocyclic hydrocarbons having at least one cyclic nitrogen, hydroxy amino hydrocarbons, NH{sub 4}-lignosulfonate, fur-furylamine, tetrahydrofurylamine, hexamethylenediamine, barbituric acid, guanidine, guanidine carbonate, biguanidine, guanylurea sulfate, melamine, dicyandiamide, biuret, 1.1{prime}-azobisformamide, methylol urea, methylol urea-urea condensation product, dimethylol urea, methyl urea, dimethyl urea, calcium cyanamide, and mixtures thereof under conditions effective to reduce the nitrogen oxides concentration and ensure the presence of ammonia in the effluent; introducing into the effluent a second treatment agent comprising an oxygenated hydrocarbon at an effluent temperature of about 500{degrees} F. to about 1600{degrees} F. under conditions effective to oxidize nitric oxide in the effluent to nitrogen dioxide and ensure the presence of ammonia at a weight ratio of ammonia to nitrogen dioxide of about 1:5 to about 5:1; and contacting the effluent with an aqueous scrubbing solution having a pH of 12 or lower under conditions effective to cause nitrogen dioxide to be absorbed therein.

  15. Research on Aerodynamic Noise Reduction for High-Speed Trains

    OpenAIRE

    Zhang, Yadong; Zhang, Jiye; Li, Tian; Zhang, Liang; Zhang, Weihua

    2016-01-01

    A broadband noise source model based on Lighthill’s acoustic theory was used to perform numerical simulations of the aerodynamic noise sources for a high-speed train. The near-field unsteady flow around a high-speed train was analysed based on a delayed detached-eddy simulation (DDES) using the finite volume method with high-order difference schemes. The far-field aerodynamic noise from a high-speed train was predicted using a computational fluid dynamics (CFD)/Ffowcs Williams-Hawkings (FW-H)...

  16. Catalytic and inhibitory effects of thechnetium on reduction processes

    International Nuclear Information System (INIS)

    Grases, F.; Genestar, C.; March, J.G.; March, P.

    1986-01-01

    Interactions between technetium and some anthraquinones and tartrazin in the presence of tin(II) are described. It was found that whereas the reductive process between Sn(II) and 1-amino-4-hydroxyanthraquinone is catalyzed by technetium, the reduction of tartrazin is inhibited by this element. Study of such process seems to indicate that the catalytic effect of technetium on the reduction processes is due to Tc(V) action whereas the inhibitory effect is due to the Tc(IV) species. (author)

  17. [Treatment of acrylate wastewater by electrocatalytic reduction process].

    Science.gov (United States)

    Yu, Li-Na; Song, Yu-Dong; Zhou, Yue-Xi; Zhu, Shu-Quan; Zheng, Sheng-Zhi; Ll, Si-Min

    2011-10-01

    High-concentration acrylate wastewater was treated by an electrocatalytic reduction process. The effects of the cation exchange membrane (CEM) and cathode materials on acrylate reduction were investigated. It indicated that the acrylate could be reduced to propionate acid efficiently by the electrocatalytic reduction process. The addition of CEM to separator with the cathode and anode could significantly improve current efficiency. The cathode materials had significant effect on the reduction of acrylate. The current efficiency by Pd/Nickel foam, was greater than 90%, while those by nickel foam, the carbon fibers and the stainless steel decreased successively. Toxicity of the wastewater decreased considerably and methane production rate in the biochemical methane potential (BMP) test increased greatly after the electrocatalytic reduction process.

  18. Initial training for trainers the spiral process or ''getting trained while training''

    International Nuclear Information System (INIS)

    Croes, R.

    1996-01-01

    The initial training program for trainers is part of an overall gradual development towards full professionalism. Based on the two key words, responsibility and autonomy, the global aim is to provide assistance to new instructors so that they become full actors in their own training process and to prepare them to deal with all the different situations they may meet. The SPIRAL process lasts one full year and could be characterized in four words: alternation, support, individualization and project. From the first weeks in the process, the new trainers already deliver training instructions. The SPIRAL year terminates with the presentation to the project before an evaluation board. The evaluation takes into account the project and the on going assessment of acquisition of knowledge and skills

  19. Team training process for nuclear plant technicians

    International Nuclear Information System (INIS)

    Macris, A.C.

    1987-01-01

    The purpose of team training is the cooperative and coordinated actions of individual to attain a common goal. Such training requires the development of more sophisticated educational techniques than those previously established for training individuals alone. Extensive research has been conducted to devise methods and techniques to bring about effective team training. This paper discusses current team training methods and present an instructional strategy for the application of effective team training techniques

  20. Idaho Chemical Processing Plant training program

    International Nuclear Information System (INIS)

    1975-01-01

    Objectives, regulations and requirements, training methods, certification and recertification, progression and incentives, and coverage of the ICPP operator training program are discussed in detail. (LK)

  1. PROCESS VARIABILITY REDUCTION THROUGH STATISTICAL PROCESS CONTROL FOR QUALITY IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    B.P. Mahesh

    2010-09-01

    Full Text Available Quality has become one of the most important customer decision factors in the selection among the competing product and services. Consequently, understanding and improving quality is a key factor leading to business success, growth and an enhanced competitive position. Hence quality improvement program should be an integral part of the overall business strategy. According to TQM, the effective way to improve the Quality of the product or service is to improve the process used to build the product. Hence, TQM focuses on process, rather than results as the results are driven by the processes. Many techniques are available for quality improvement. Statistical Process Control (SPC is one such TQM technique which is widely accepted for analyzing quality problems and improving the performance of the production process. This article illustrates the step by step procedure adopted at a soap manufacturing company to improve the Quality by reducing process variability using Statistical Process Control.

  2. Equilibrium calculation for the electrolytic reduction process of the ACP

    International Nuclear Information System (INIS)

    Park, Byung Heung; Seo, Chung Seok; Yoon, Ji Sup

    2006-01-01

    The electrolytic reduction process is the most critical process of the advanced spent fuel conditioning process (ACP) since most of the chemical reactions take place during this reduction process in a molten salt bath. However, it is very difficult to observe the behavior of all the spent fuel elements by experiments. Therefore, a perspective calculation is required to predict how much the chemicals are distributed between the phases and which forms are stable in each phase. Chemical equilibria take place during the electrolytic reduction process. The reduction process uses a porous magnesia filter and the materials to be reduced are loaded into the filter, which means the filter, the cathode of the electrolytic reduction cell, acts as a packed-bed reactor. Lithium metal is produced by an electrolytic reaction in a molten Li 2 O-LiCl cell and the reaction is denoted as Eq. In this work, attention has been paid to the chemical reactions of Eq. since an electrochemical reaction is controlled easily by the supplied current and the extents of the chemical reactions are determined by considering many candidates species. Uranium oxides, for example, can be reduced to U 4 O 9 , UO 2 , and/or U when U 3 O 8 is fed to the electrolytic reduction process

  3. Reduction in O and M costs in training

    International Nuclear Information System (INIS)

    Schaffer, R.E.

    1991-01-01

    In 1988, PSE and G undertook a major effort to identify methods to reduce O and M costs throughout the company. The Nuclear Training Department participated in this project by identifying three management level people to act as analysts. These analysts were responsible for breaking all portions of jobs performed at the training center down to their component parts, identifying tasks which were not essential to meeting the regulatory requirements and the company's business plan, and rolling these task back up into full-time equivalent positions. As a concurrent effort, brain-storming sessions were held with the staff to identify ways to reduce O and M costs, to separate wants from needs, and to work smarter. All these efforts were required to identify a stretch target of 40% savings in the current O and M budget. In addition, ideas from other units in the company which affected training were transmitted to the training department and were reviewed for potential savings. The ideas were assessed for risk, start-up cost and practicality. They were classified as Go, No-go or Further study and were then presented to the company executives. The final results for the Nuclear Training Department showed a total savings potential of 51.4%, of which 12.1% were Go and another 13.6% merited further study

  4. Acceptability of Mental Health Stigma-Reduction Training and Initial Effects on Awareness Among Military Personnel

    Science.gov (United States)

    2015-10-13

    experiences and attitudes may reduce stigma associated with seeking help for mental health con- cerns in a military population, although results from...Hurtado et al. SpringerPlus (2015) 4:606 DOI 10.1186/s40064-015-1402-z RESEARCH Acceptability of  mental health stigma -reduction training and...purpose of this paper is to report on the development of a mental health stigma reduction toolkit and training, and the acceptability and level of stigma

  5. Acceptability of mental health stigma-reduction training and initial effects on awareness among military personnel.

    Science.gov (United States)

    Hurtado, Suzanne L; Simon-Arndt, Cynthia M; McAnany, Jennifer; Crain, Jenny A

    2015-01-01

    The purpose of this paper is to report on the development of a mental health stigma reduction toolkit and training, and the acceptability and level of stigma awareness following the stigma-reduction training for military personnel. The overall aims of the training were to provide discussion tools highlighting the experiences of Marines seeking help for stress concerns, improve communication between leaders and their Marines around the issue of help seeking, and familiarize Marines with behavioral health treatment. Senior enlisted leaders and officers (N = 52) from a Marine Corps battalion participated in a pretest, 2-h stigma-reduction training and immediate posttest. Acceptability of the training was measured by querying participants about the usefulness and helpfulness of the training among other factors, and stigma awareness was measured with 10 items about mental health stigma. The stigma-reduction training and materials were well accepted by participants. In addition, there was a significant improvement in four of ten stigma-reduction awareness concepts measured before and immediately after the training, which included an increase in agreement that mental health treatments are usually effective in reducing stress reactions [t(51) = -3.35, p = 0.002], and an increase in disagreement that seeking counseling after a deployment will jeopardize future deployments [t(51) = -3.05, p = 0.004]. Level of agreement with several statements including those regarding perceptions of invincibility, and malingering, among others, did not change significantly after the training. The stigma-reduction training containing educational and contact strategies was highly acceptable to the leaders and may have promise for initially dispelling myths associated with seeking help for stress concerns among military service members; however, results indicate that there is clearly more work to be done in combatting stigma.

  6. Military nurses in Venezuela and training process

    Directory of Open Access Journals (Sweden)

    Claudia Izquierdo-Martínez

    2017-04-01

    Full Text Available Nursing career professionals with solid-humanistic way scientific, ethical and basis in order that they can properly integrate the multidisciplinary team to creatively solve health problems through nursing care. This article analyzes the formation of the military nurse in Venezuela, with the help of logical historical method to uncover trends and regularities that characterize this process. The nurse is a professional attitudes, values, knowledge and skills to assume their social responsibility, applying theories and models of discipline in the promotion, prevention, recovery and rehabilitation of health. Similarly, military nurse career provides to the military institution and especially health institutions of the country leadership training in the management of custodial care, management and research on health and committed to education continues in his practice.

  7. Determination of temperature and pressure in the calcium reduction process

    International Nuclear Information System (INIS)

    Arceri, Mariana E.

    1997-01-01

    The calcium reduction process consists in the reduction of uranium tetrafluoride (UF 4 ) with calcium in a refractory material crucible, in order to obtain metallic uranium. The crucible is in turn contained in a steel reactor, heated by means of an induction coil to bring the reagents from the environmental temperature to the temperature necessary for the reaction starting. For the design of the reactor, mathematical expressions that allow to estimate the temperature and pressure of the system have been developed

  8. SELECTION AND PRELIMINARY EVALUATION OF ALTERNATIVE REDUCTANTS FOR SRAT PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    Stone, M.; Pickenheim, B.; Peeler, D.

    2009-06-30

    Defense Waste Processing Facility - Engineering (DWPF-E) has requested the Savannah River National Laboratory (SRNL) to perform scoping evaluations of alternative flowsheets with the primary focus on alternatives to formic acid during Chemical Process Cell (CPC) processing. The reductants shown below were selected for testing during the evaluation of alternative reductants for Sludge Receipt and Adjustment Tank (SRAT) processing. The reductants fall into two general categories: reducing acids and non-acidic reducing agents. Reducing acids were selected as direct replacements for formic acid to reduce mercury in the SRAT, to acidify the sludge, and to balance the melter REDuction/OXidation potential (REDOX). Non-acidic reductants were selected as melter reductants and would not be able to reduce mercury in the SRAT. Sugar was not tested during this scoping evaluation as previous work has already been conducted on the use of sugar with DWPF feeds. Based on the testing performed, the only viable short-term path to mitigating hydrogen generation in the CPC is replacement of formic acid with a mixture of glycolic and formic acids. An experiment using glycolic acid blended with formic on an 80:20 molar basis was able to reduce mercury, while also targeting a predicted REDuction/OXidation (REDOX) of 0.2 expressed as Fe{sup 2+}/{Sigma}Fe. Based on this result, SRNL recommends performing a complete CPC demonstration of the glycolic/formic acid flowsheet followed by a design basis development and documentation. Of the options tested recently and in the past, nitric/glycolic/formic blended acids has the potential for near term implementation in the existing CPC equipment providing rapid throughput improvement. Use of a non-acidic reductant is recommended only if the processing constraints to remove mercury and acidify the sludge acidification are eliminated. The non-acidic reductants (e.g. sugar) will not reduce mercury during CPC processing and sludge acidification would

  9. Non-process instrumentation surveillance and test reduction

    International Nuclear Information System (INIS)

    Ferrell, R.; LeDonne, V.; Donat, T.; Thomson, I.; Sarlitto, M.

    1993-12-01

    Analysis of operating experience, instrument failure modes, and degraded instrument performance has led to a reduction in Technical Specification surveillance and test requirements for nuclear power plant process instrumentation. These changes have resulted in lower plant operations and maintenance (O ampersand M) labor costs. This report explores the possibility of realizing similar savings by reducing requirements for non-process instrumentation. The project team reviewed generic Technical Specifications for the four major US nuclear steam supply system (NSSS) vendors (Westinghouse, General Electric, Combustion Engineering, and Babcock ampersand Wilcox) to identify nonprocess instrumentation for which surveillance/test requirements could be reduced. The team surveyed 10 utilities to identify specific non-process instrumentation at their plants for which requirements could be reduced. The team evaluated utility analytic approaches used to justify changes in surveillance/test requirements for process equipment to determine their applicability to non-process instrumentation. The report presents a prioritized list of non-process instrumentation systems suitable for surveillance/test requirements reduction. The top three systems in the list are vibration monitors, leak detection monitors, and chemistry monitors. In general, most non-process instrumentation governed by Technical Specification requirements are candidates for requirements reduction. If statistical requirements are somewhat relaxed, the analytic approaches previously used to reduce requirements for process instrumentation can be applied to non-process instrumentation. The report identifies as viable the technical approaches developed and successfully used by Southern California Edison, Arizona Public Service, and Boston Edison

  10. Managing the training process: contracting for training services

    International Nuclear Information System (INIS)

    Carlson, E.R.

    1985-01-01

    The need for using consultants and contracting for training services should be based on one or more of these three major reasons: the need to expand capability on a crash basis, the need for specialized expertise, and the need for objectivity, and independence. When the need for using a consultant exists, the training manager must first define the scope of work or services the consultant is to provide and how the consultant will interface with the training staff. The next step will be to develop a Request for Proposal which involves management, training staff, and contract services organizations. The critical parts of an RFP are scope and schedule. Consideration would be given to determining which consultant organizations should receive the RFP, and specifying who is on the bidders list. The third step will consist of evaluating the proposals and awarding the work. This step needs to be objective, defendable, and repeatable. The final phase will be the performance of the work. The activities included are project initiation, monitoring contractor performance, and formal conclusion

  11. Development of reduction technology for oxide fuel. Behaviour of rare-earth in lithium reduction process

    International Nuclear Information System (INIS)

    Kato, Tetsuya; Usami, Tsuyoshi; Yuda, Ryoichi; Kurata, Masateru; Moriyama, Hirotake

    2000-01-01

    Solubility measurements of rare-earth oxides in molten LiCl-Li 2 O salt and reduction tests of UO 2 doped with rare-earth oxides were carried out to determine the behavior of rare-earths in lithium reduction process. The solubility of rare-earth oxides increases in the order of Gd 2 O concentration. In multi-element systems including 6 rare-earth oxides, the solubility of each element is smaller than that in the individual systems. In the reduction tests, more than 90% of UO 2 was reduced within 1 hour after starting reduction and about 7% of rare-earths eluded into the LiCl molten salt bath containing Li 2 O which is formed by the reduction of UO 2 . The rare-earth concentrations in the bath were evaluated using the solubility data, assuming that rare-earth oxides in multi-element systems form solid solution as the equilibrium solid phase and that the activity coefficients in the solid phase are independent of the compositions. The calculated concentrations are consistent with the experimental ones obtained in the reduction tests. (author)

  12. An advanced purex process based on salt-free reductants

    Energy Technology Data Exchange (ETDEWEB)

    He, Hui; Ye, Guoan; Tang, Hongbin; Zheng, Weifang; Li, Gaoliang; Lin, Rushan [China Institute of Atomic Energy, Beijing (China). Dept. of Radiochemistry

    2014-04-01

    An advanced plutonium and uranium recovery process has been established based on two organic reductants, N,N-dimethylhydroxylamine (DMHAN) and methylhydrazine (MH), as U/Pu separation reagents. This Advanced Purex process based on Organic Reductants (APOR) is composed of three cycles, including U/Pu co-decontamination/separation cycle, uranium purification cycle and plutonium purification cycle. Using DMHAN and MH as plutonium stripping reagents in the U/Pu co-decontamination/separation cycle and plutonium purification cycle, the APOR process exhibits high performance with following highlights: (1) the process is much simpler because of the elimination of Tc scrubbing operation and the supplement extraction operation, (2) high efficiency of U/Pu separation can be achieved in the first cycle, (3) plutonium product solution of high concentration can be obtained in the Pu purification cycle with a simple extraction operation instead of circumfluent extraction or evaporation of the plutonium solution. (orig.)

  13. analysis of profitability and poverty reduction of yoghurt processing

    African Journals Online (AJOL)

    Admin

    KEY WORDS: Profitability, poverty reduction, yoghurt, processing, employment ... 70% percent of the rural working population (Joshua,. 1999). With about 76 out of every 120 people living ... traditionally the difference between total revenue and ... (70%) of the respondents were males while 30% were females. The age ...

  14. NTC operator training program viewed from SAT-based training process

    International Nuclear Information System (INIS)

    Matsumoto, Yoshio

    1996-01-01

    The Nuclear Power Training Center Ltd. (NTC) was established in June 1972 to train PWR plant operators. Operator training was started in Apr. 1974. Presently we have three full-scope, control-room simulators. Recently IAEA recommended that its Systematic Approach to Training (SAT) be used for the training of NPP personnel. We thoroughly examined the SAT-based process and compared it against the NTC training program. As a result, we have recognized that the NTC training program satisfies the SAT-based training process. We now intend to improve the feedback step of the NTC training system. Our efforts continue to produce a relevant program at the forefront of our profession. (author)

  15. U.S. Marine Corps Communication-Electronics School Training Process: Discrete-Event Simulation and Lean Options

    National Research Council Canada - National Science Library

    Neu, Charles R; Davenport, Jon; Smith, William R

    2007-01-01

    This paper uses discrete-event simulation modeling, inventory-reduction, and process improvement concepts to identify and analyze possibilities for improving the training continuum at the Marine Corps...

  16. Effectiveness of a smartphone-based worry-reduction training for stress reduction: A randomized-controlled trial.

    Science.gov (United States)

    Versluis, Anke; Verkuil, Bart; Spinhoven, Philip; F Brosschot, Jos

    2018-04-03

    Perseverative cognition (e.g. worry) and unconscious stress are suggested to be important mediators in the relation between stressors and physiological health. We examined whether a smartphone-based worry-reduction training improved a physiological marker of stress (i.e. increased heart rate variability [HRV]) and unconscious stress. Randomised-controlled trial was conducted with individuals reporting work stress (n = 136). Participants were randomised to the experimental, control or waitlist condition (resp. EC, CC, WL). The EC and CC registered emotions five times daily for four weeks. The EC additionally received a worry-reduction training with mindfulness exercises. Primary outcome was 24-h assessments of HRV measured at pre-, mid- and post-intervention. Secondary outcomes were implicit affect and stress. Effects on heart rate and other psychological outcomes were explored. A total of 118 participants completed the study. No change from pre- to post-intervention was observed for the primary or secondary outcomes. The change over time was not different between conditions. Findings suggest that the training was ineffective for improving HRV or psychological stress. Future studies may focus on alternative smartphone-based stress interventions, as stress levels are high in society. There is need for easy interventions and smartphones offer possibilities for this.

  17. Maximising harm reduction in early specialty training for general practice: validation of a safety checklist.

    Science.gov (United States)

    Bowie, Paul; McKay, John; Kelly, Moya

    2012-06-21

    Making health care safer is a key policy priority worldwide. In specialty training, medical educators may unintentionally impact on patient safety e.g. through failures of supervision; providing limited feedback on performance; and letting poorly developed behaviours continue unchecked. Doctors-in-training are also known to be susceptible to medical error. Ensuring that all essential educational issues are addressed during training is problematic given the scale of the tasks to be undertaken. Human error and the reliability of local systems may increase the risk of safety-critical topics being inadequately covered. However adherence to a checklist reminder may improve the reliability of task delivery and maximise harm reduction. We aimed to prioritise the most safety-critical issues to be addressed in the first 12-weeks of specialty training in the general practice environment and validate a related checklist reminder. We used mixed methods with different groups of GP educators (n=127) and specialty trainees (n=9) in two Scottish regions to prioritise, develop and validate checklist content. Generation and refinement of checklist themes and items were undertaken on an iterative basis using a range of methods including small group work in dedicated workshops; a modified-Delphi process; and telephone interviews. The relevance of potential checklist items was rated using a 4-point scale content validity index to inform final inclusion. 14 themes (e.g. prescribing safely; dealing with medical emergency; implications of poor record keeping; and effective & safe communication) and 47 related items (e.g. how to safety-net face-to-face or over the telephone; knowledge of practice systems for results handling; recognition of harm in children) were judged to be essential safety-critical educational issues to be covered. The mean content validity index ratio was 0.98. A checklist was developed and validated for educational supervisors to assist in the reliable delivery of

  18. Phase Evolution During the Carbothermic Reduction Process of Ilmenite Concentrate

    Science.gov (United States)

    Gou, Hai-Peng; Zhang, Guo-Hua; Chou, Kuo-Chih

    2015-02-01

    The phase evolution during the carbothermic reduction process of Panzhihua ilmenite concentrate was investigated under argon atmosphere. The Panzhihua ilmenite concentrate briquette with graphite powder was reduced at 1473 K, 1573 K, 1673 K, and 1773 K (1200 °C, 1300 °C, 1400 °C, and 1500 °C) respectively, with the molar ratios of C to FeTiO3 being 4:1 and 5:1. The phase transformation of the briquette reduced at different temperatures was investigated by X-ray diffraction and scanning electron microscope. During the carbothermic reduction process from 1473 K to 1773 K (1200 °C to 1500 °C), it was found that main phases were Fe, Ti3O5, Ti2O3, and TiC x O y . The lowest temperature for the generation of TiC x O y was 1573 K (1300 °C) for both kinds of briquettes with different C contents. The rate controlling step for the carbothermic reduction above 1573 K (1300 °C) obeyed the diffusion model. The reduction degree of the ilmenite was increased by increasing the temperature. With the increase of reaction temperature and reaction time, TiC x O y phase would be reduced to TiC phase.

  19. PROPHYLAXICAL EFFECT AT THE INTENSIVE TRAINING PROCESS AF COMBAT SPORTS

    OpenAIRE

    Zoran Ćirković; Goran Kasum

    2006-01-01

    In the system af preparation high-rank fighters, connected links which take central place are training, competition, recuperation. Trainer’s mastery skill is almost reflected at dexterity at connecting these links into the unique sistem af preparing fighters. Harmonious functioning and connecting training process and competition with recuperation processes is very important supposition of good quality fighters’ preparation in all training phases. However, it has a special expression at the in...

  20. The evaluation process of short training sessions in organizations

    NARCIS (Netherlands)

    Overschie, M.G.F.; Lukosch, H.K.; De Vries, P.

    This paper presents a critical reflection of the evaluation of learning processes in organizations. Based on learning and evaluation theories and concepts we discuss qualitative and quantitative evaluation processes, and its relationship to short training sessions to foster sustainable development.

  1. Process for the reduction of nitrogen oxides in an effluent

    Energy Technology Data Exchange (ETDEWEB)

    Epperly, W.R.; Sullivan, J.C.; Sprague, B.N.

    1989-07-04

    This patent describes a process for the reduction of the concentration of nitrogen oxides in the effluent from the combustion of a carbonaceous fuel. The process comprises introducing a treatment agent which comprises a composition selected from the group consisting of NH/sub 4/-lignosulfonate, calcium lignosulfonate, 2-furoic acid, 1,3 dioxolane, tetrahydrofuran, furfurylamine, furfurylalcohol, gluconic acid, citric acid, n-butyl acetate, 1,3 butylene glycol, methylal, tetrahydrofuryl alcohol, furan, fish oil, coumalic acid, furfuryl acetate, tetrahydrofuran 2,3,4,5-tetracarboxylic acid, tetrahydrofurylamine, furylacrylic acid, tetrahydropyran, 2,5-furandimethanol, mannitol, hexamethylenediamine, barbituric acid, acetic anhydride, oxalic acid, mucic acid and d-galactose.

  2. Gene regulation and noise reduction by coupling of stochastic processes

    Science.gov (United States)

    Ramos, Alexandre F.; Hornos, José Eduardo M.; Reinitz, John

    2015-02-01

    Here we characterize the low-noise regime of a stochastic model for a negative self-regulating binary gene. The model has two stochastic variables, the protein number and the state of the gene. Each state of the gene behaves as a protein source governed by a Poisson process. The coupling between the two gene states depends on protein number. This fact has a very important implication: There exist protein production regimes characterized by sub-Poissonian noise because of negative covariance between the two stochastic variables of the model. Hence the protein numbers obey a probability distribution that has a peak that is sharper than those of the two coupled Poisson processes that are combined to produce it. Biochemically, the noise reduction in protein number occurs when the switching of the genetic state is more rapid than protein synthesis or degradation. We consider the chemical reaction rates necessary for Poisson and sub-Poisson processes in prokaryotes and eucaryotes. Our results suggest that the coupling of multiple stochastic processes in a negative covariance regime might be a widespread mechanism for noise reduction.

  3. Gene regulation and noise reduction by coupling of stochastic processes.

    Science.gov (United States)

    Ramos, Alexandre F; Hornos, José Eduardo M; Reinitz, John

    2015-02-01

    Here we characterize the low-noise regime of a stochastic model for a negative self-regulating binary gene. The model has two stochastic variables, the protein number and the state of the gene. Each state of the gene behaves as a protein source governed by a Poisson process. The coupling between the two gene states depends on protein number. This fact has a very important implication: There exist protein production regimes characterized by sub-Poissonian noise because of negative covariance between the two stochastic variables of the model. Hence the protein numbers obey a probability distribution that has a peak that is sharper than those of the two coupled Poisson processes that are combined to produce it. Biochemically, the noise reduction in protein number occurs when the switching of the genetic state is more rapid than protein synthesis or degradation. We consider the chemical reaction rates necessary for Poisson and sub-Poisson processes in prokaryotes and eucaryotes. Our results suggest that the coupling of multiple stochastic processes in a negative covariance regime might be a widespread mechanism for noise reduction.

  4. The effect of material productivity on scrap reduction on aluminum reduction pot process

    Science.gov (United States)

    Huda, L. N.

    2018-02-01

    Scrap in the production process is defined as part of production that can not be accepted as the final product due to production failure. The amount of scarp occurring in the reduction pot production process of one of the aluminum smelting furnaces exceeds the acceptance standard of 5 to 10%. This affects the amount of production produced. The purpose of this study is to reduce the amount of scrap produced to increase the productivity of the materials used. The solution is carried-out by making improvements using Lean Six Sigma method. In the initial calculation, material productivity ranged from 0.88. Based on the study, the factors that cause the high amount of scrap produced is the use of Na2O which is inserted into the alumina is different in size and the influence of noise that occurs in pots that are difficult to control. The analysis base on Lean Six Sigma obtained process cycle efficiency (PCE) equal to 86,92% for actual condition. Process improvement is carried-out through define, measure, analyze, improve and control procedure on Na2O feeding process and PCE value decrease 6,05%. This indicates that increased process capability will reduce scrap. A decrease in scrap amount of about 6% will be able to increase material productivity by 0.05%. This indicates that continuous process control is needed to decrease the number of scraps and increase productivity.

  5. Catalytic/non-catalytic combination process for nitrogen oxides reduction

    International Nuclear Information System (INIS)

    Luftglass, B.K.; Sun, W.H.; Hofmann, J.E.

    1992-01-01

    This patent describes a process for the reduction of nitrogen oxides in the effluent from the combustion of a carbonaceous fuel. It comprises introducing a nitrogenous treatment agent comprising urea, one or more of the hydrolysis products of urea, ammonia, compounds which produce ammonia as a by-product, ammonium salts of organic acids, 5- or 6-membered heterocyclic hydrocarbons having at least one cyclic nitrogen, hydroxy amino hydrocarbons, or mixtures thereof into the effluent at an effluent temperature between about 1200 degrees F and about 2100 degrees F; and contacting the treated effluent under conditions effective to reduce the nitrogen oxides in the effluent with a catalyst effective for the reduction of nitrogen oxides in the presence of ammonia

  6. Job training planning and design for process plant operators

    Energy Technology Data Exchange (ETDEWEB)

    Wirstad, J.

    1983-01-01

    A method is presented by which process plant operators for nuclear power plants are trained in Sweden. It works by a top-down method of systems analysis which can be integrated into the analysis, specification, and design of the process automation system. The training methods can also be adapted to existing automation systems and operating schedules. The author's method is based on the principle that training programs should be based on job requirements, e.g. operator tasks in common, less frequent, and rare operating conditions. Procedures have been tested for the following steps: Job analysis, analysis of knowledge and experience required, analysis of operator training requirements, set-up and organisation of the training programme, achievement control, evaluation of the training programme.

  7. Job training planning and design for process plant operators

    International Nuclear Information System (INIS)

    Wirstad, J.

    1983-01-01

    A method is presented by which process plant operators for nuclear power plants are trained in Sweden. It works by a top-down method of systems analysis which can be integrated into the analysis, specification, and design of the process automation system. The training methods can also be adapted to existing automation systems and operating schedules. The author's method is based on the principle that training programs should be based on job requirements, e.g. operator tasks in common, less frequent, and rare operating conditions. Procedures have been tested for the following steps: Job analysis, analysis of knowledge and experience required, analysis of operator training requirements, set-up and organisation of the training programme, achievement control, evaluation of the training programme. (orig./HP) [de

  8. Does attentional training improve numerical processing in developmental dyscalculia?

    Science.gov (United States)

    Ashkenazi, Sarit; Henik, Avishai

    2012-01-01

    Recently, a deficit in attention was found in those with pure developmental dyscalculia (DD). Accordingly, the present study aimed to examine the influence of attentional training on attention abilities, basic numerical abilities, and arithmetic in participants who were diagnosed as having DD. Nine university students diagnosed as having DD (IQ and reading abilities in the normal range and no indication of attention-deficit hyperactivity disorder) and nine matched controls participated in attentional training (i.e., video game training). First, training modulated the orienting system; after training, the size of the validity effect (i.e., effect of valid vs. invalid) decreased. This effect was comparable in the two groups. Training modulated abnormalities in the attention systems of those with DD, that is, it reduced their enlarged congruity effect (i.e., faster responding when flanking arrows pointed to the same location as a center arrow). Second, in relation to the enumeration task, training reduced the reaction time of the DD group in the subitizing range but did not change their smaller-than-normal subitizing range. Finally, training improved performance in addition problems in both the DD and control groups. These results imply that attentional training does improve most of the attentional deficits of those with DD. In contrast, training did not improve the abnormalities of the DD group in arithmetic or basic numerical processing. Thus, in contrast to the domain-general hypothesis, the deficits in attention among those with DD and the deficits in numerical processing appear to originate from different sources.

  9. Reduction of environmental pollution from fuel and target manufacturing processes

    International Nuclear Information System (INIS)

    Hardt, H.A.

    1976-10-01

    Nuclear fuel and target manufacturing processes in the 300 Area generate potential environmental pollutants. Efforts to eliminate or reduce their harmful effects have been pursued for many years by the Raw Materials and Raw Materials Technology departments with assistance from other groups, primarily the Project and Health Physics departments. This report documents: methods adopted to reduce pollution; cost of these methods; amount of pollution reduction achieved; and other benefits in cost savings or quality improvement for January 1968 through December 1975. Capital funds totaling $915,000 were spent on these programs. Annual cost savings of $65,000 were realized, and incidental but significant improvements in product quality were obtained. In no case was product quality degraded. Reductions in releases of pollutants are summarized for water pollution, air pollution, and land pollution. In addition to these reductions, intangible benefits were realized including reduced corrosion of structures and equipment; improved working conditions for personnel; energy savings, both on and offplant; improved utilization of natural resources; and reduced impact to environment, both on and offplant

  10. Working memory training improves reading processes in typically developing children.

    Science.gov (United States)

    Loosli, Sandra V; Buschkuehl, Martin; Perrig, Walter J; Jaeggi, Susanne M

    2012-01-01

    The goal of this study was to investigate whether a brief cognitive training intervention results in a specific performance increase in the trained task, and whether there are transfer effects to other nontrained measures. A computerized, adaptive working memory intervention was conducted with 9- to 11-year-old typically developing children. The children considerably improved their performance in the trained working memory task. Additionally, compared to a matched control group, the experimental group significantly enhanced their reading performance after training, providing further evidence for shared processes between working memory and reading.

  11. Significant thermal energy reduction in lactic acid production process

    International Nuclear Information System (INIS)

    Mujtaba, Iqbal M.; Edreder, Elmahboub A.; Emtir, Mansour

    2012-01-01

    Lactic acid is widely used as a raw material for the production of biodegradable polymers and in food, chemical and pharmaceutical industries. The global market for lactic acid is expected to reach 259 thousand metric tons by the year 2012. For batch production of lactic acid, the traditional process includes the following steps: (i) esterification of impure lactic acid with methanol in a batch reactor to obtain methyl lactate (ester), (ii) separation of the ester in a batch distillation, (iii) hydrolysis of the ester with water in a batch reactor to produce lactic acid and (iv) separation of lactic acid (in high purity) in a batch distillation. Batch reactive distillation combines the benefit of both batch reactor and batch distillation and enhances conversion and productivity (Taylor and Krishna, 2000 ; Mujtaba and Macchietto, 1997 ). Therefore, the first and the last two steps of the lactic acid production process can be combined together in batch reactive distillation () processes. However, distillation (batch or continuous) is an energy intensive process and consumes large amount of thermal energy (via steam). This paper highlights how significant (over 50%) reduction in thermal energy consumption can be achieved for lactic acid production process by carefully controlling the reflux ratio but without compromising the product specification. In this paper, only the simultaneous hydrolysis of methyl lactate ester and the separation of lactic acid using batch reactive distillation is considered.

  12. Four weeks of speed endurance training reduces energy expenditure during exercise and maintains muscle oxidative capacity despite a reduction in training volume

    DEFF Research Database (Denmark)

    Iaia, F. Marcello; Hellsten, Ylva; Nielsen, Jens Jung

    2009-01-01

    We studied the effect of an alteration from regular endurance to speed endurance training on muscle oxidative capacity, capillarization, as well as energy expenditure during submaximal exercise and its relationship to mitochondrial uncoupling protein 3 (UCP3) in humans. Seventeen endurance...... by lowered mitochondrial UCP3 expression. Furthermore, speed endurance training can maintain muscle oxidative capacity, capillarization, and endurance performance in already trained individuals despite significant reduction in the amount of training....

  13. THE EFFECTS OF PHYSICAL TRAINING ON CARDIOVASCULAR PARAMETERS AND REDUCTION OF VISCERAL FATTY TISSUE

    Directory of Open Access Journals (Sweden)

    Todorka Savic

    2007-12-01

    Full Text Available Regular physical activity and good physical condition are widely accepted as factors that reduce all-cause mortality and improve a number of health outcomes.The aim of this study was to investigate the effects of aerobic exercise training on cardiovascular parameters and reduction of visceral obesity in patients with stable coronary artery disease participating in a cardiovascular rehabilitation exercise program. Fifty-two patients with stable coronary heart disease who had been accepted into the outpatient Phase II cardiovascular rehabilitation program at the Institute for Treatment and Rehabilitation of Cardiovascular Diseases Niska Banja, Nis, Serbia,were recruited for this study. All patients were divided into two groups: group with stable coronary heart disease who had regular aerobic physical training during 6weeks and control without physical training. There were not significant differences in body weight, body mass index, waist circumference and waist /hip ratio in start and at the end of physical training program. Physical training did not reduce the above mentioned parameters after 6 weeks. There were not significant differences in systolic and diastolic blood pressure at the beginning and at the end of the observed period.In group with physical training, a significant reduction of systolic and diastolic blood pressure after cardiovascular rehabilitation were reported (p<0.05. In patients with moderate aerobic physical training, a significant decrease in the heart rate was registered after the 6-week follow-up (p<0.05, while heart rate was significantly lower in this group compared to group with sedentary lifestyle (p<0.05. The effects of the 6-week cardiovascular rehabilitation on lipid parameters is visible only in slight reduction of triglyceride values in group with physical training (p<0.05. The concentration of triglycerides were significantly lower in this group compared to sedentary patients after the 6-week follow-up (p<0

  14. Cost and waste volume reduction in HEPA filter trains by effective pre-filtration

    International Nuclear Information System (INIS)

    Chadwick, Chris; Kaufman, Seth

    2006-01-01

    Data published elsewhere (Moore, et el 1992; Bergman et al 1997) suggests that the then costs of disposable type Glass Fibre HEPA filtration trains to the DOE was USD 55 million per year (based on an average usage of HEPA panels of 11,748 pieces per year between 1987 and 1990), USD 50 million of which was attributable to installation, testing, removal and disposal - although the life cycle costs are themselves based on estimates dating from 1987-1990. The same authors suggest that by 1995 the number of HEPA panels being used had dropped to an estimated 4000 pieces per year due to the ending of the Cold War. The yearly cost to the DOE of 4000 units per year was estimated to be USD 29.5 million using the same parameters that suggested the previously stated USD 55 million for the larger quantity. Within that cost estimate, USD 300 was the value given to the filter and USD 4,450 was given to peripheral activity per filter. Clearly, if the USD 4,450 component could be reduced, tremendous saving could result, in addition to a significant reduction in the legacy burden of waste volumes. This same cost is applied to both the 11,748 and 4000 usage figures. The work up to now has focussed on the development of a low cost, long life (cleanable) direct replacement of the traditional filter train, but this paper will review an alternative strategy, that of preventing the contaminating dust from reaching and blinding the HEPA filters, and thereby removing the need to replace them. What has become clear is that 'low cost' and 'stainless HEPA' are not compatible terms. The original Bergman et al work suggested that 1000 ft 3 /min stainless HEPAs could be commercially available for USD 5000 each after development (although the USD 70,000 development unit may be somewhat exaggerated - the authors have estimated that development units able to be retro-fitted into strengthened standard housings would be available for perhaps USD 30,000). The likely true cost of such an item produced

  15. Cost and waste volume reduction in HEPA filter trains by effective pre-filtration

    International Nuclear Information System (INIS)

    Chadwick, Chris

    2007-01-01

    Data published elsewhere (Moore, et al., 1992; Bergman et al., 1997) suggests that the then costs of disposable type Glass Fibre HEPA filtration trains to the DOE was $55 million per year (based on an average usage of HEPA panels of 11,748 pieces per year between 1987 and 1990), $50 million of which was attributable to installation, testing, removal and disposal. The same authors suggest that by 1995 the number of HEPA panels being used had dropped to an estimated 4000 pieces per year due to the ending of the Cold War. The yearly cost to the DOE of 4000 units per year was estimated to be $29.5 million using the same parameters that previously suggested the $55 million figure. Within that cost estimate, $300 each was the value given to the filter and $4,450 was given to peripheral activity per filter. Clearly, if the $4,450 component could be reduced, tremendous saving could result, in addition to a significant reduction in the legacy burden of waste volumes. This same cost is applied to both the 11,748 and 4000 usage figures. The work up to now has focussed on the development of a low cost, long life (cleanable), direct replacement of the traditional filter train. This paper will review an alternative strategy, that of preventing the contaminating dust from reaching and blinding the HEPA filters, and thereby removing the need to replace them. What has become clear is that 'low cost' and 'Metallic HEPA' are not compatible terms. The original Bergman et al., 1997 work suggested that 1000 cfm (cubic feet per minute) (1690 m 3 /hr) stainless HEPAs could be commercially available for $5000 each after development (although the $70,000 development unit may be somewhat exaggerated - the authors own company have estimated development units able to be retrofitted into strengthened standard housings would be available for perhaps $30,000). The likely true cost of such an item produced industrially in significant numbers may be closer to $15,000 each. That being the case, the

  16. Fluoroscopic dose reduction by acquisition frame rate reduction and image processing

    International Nuclear Information System (INIS)

    Fritz, S.L.; Mirvis, S.E.; Pals, S.O.

    1986-01-01

    A new design for fluoroscopic exposure reduction incorporates pulsed x-ray exposure, progressive scan video acquisition at frame rates below 30 Hz, interlaced video display at 30 Hz, and a video rate image processing. To evaluate this design, a variety of phantom systems have been developed to measure the impact of low frame rate pulsed digital fluoroscopy on the performance of several clinical tasks (e.g., catheter placement). The authors are currently using these phantoms with a digital fluoroscopy system using continuous x-ray, interlaced video acquisition and variable acquisition frame rate. The design of their target digital fluoroscopic system, sample image sequences, and the results of some preliminary phantom studies are reported

  17. Medication waste reduction in pediatric pharmacy batch processes.

    Science.gov (United States)

    Toerper, Matthew F; Veltri, Michael A; Hamrock, Eric; Mollenkopf, Nicole L; Holt, Kristen; Levin, Scott

    2014-04-01

    To inform pediatric cart-fill batch scheduling for reductions in pharmaceutical waste using a case study and simulation analysis. A pre and post intervention and simulation analysis was conducted during 3 months at a 205-bed children's center. An algorithm was developed to detect wasted medication based on time-stamped computerized provider order entry information. The algorithm was used to quantify pharmaceutical waste and associated costs for both preintervention (1 batch per day) and postintervention (3 batches per day) schedules. Further, simulation was used to systematically test 108 batch schedules outlining general characteristics that have an impact on the likelihood for waste. Switching from a 1-batch-per-day to a 3-batch-per-day schedule resulted in a 31.3% decrease in pharmaceutical waste (28.7% to 19.7%) and annual cost savings of $183,380. Simulation results demonstrate how increasing batch frequency facilitates a more just-in-time process that reduces waste. The most substantial gains are realized by shifting from a schedule of 1 batch per day to at least 2 batches per day. The simulation exhibits how waste reduction is also achievable by avoiding batch preparation during daily time periods where medication administration or medication discontinuations are frequent. Last, the simulation was used to show how reducing batch preparation time per batch provides some, albeit minimal, opportunity to decrease waste. The case study and simulation analysis demonstrate characteristics of batch scheduling that may support pediatric pharmacy managers in redesign toward minimizing pharmaceutical waste.

  18. Sustainable cost reduction by lean management in metallurgical processes

    Directory of Open Access Journals (Sweden)

    A. V. Todorut

    2016-10-01

    Full Text Available This paper focuses on the need for sustainable cost reduction in the metallurgical industry by applying Lean Management (LM tools and concepts in metallurgical production processes leading to increased competitiveness of corporations in a global market. The paper highlights that Lean Management is a novel way of thinking, adapting to change, reducing waste and continuous improvement, leading to sustainable development of companies in the metallurgical industry. The authors outline the main Lean Management instruments based on recent scientific research and include a comparative analysis of other tools, such as Sort, Straighten, Shine, Standardize, Sustain (5S, Visual Management (VM, Kaizen, Total Productive Maintenance (TPM, Single-Minute Exchange of Dies (SMED, leading to a critical appraisal of their application in the metallurgical industry.

  19. Neural network training by Kalman filtering in process system monitoring

    International Nuclear Information System (INIS)

    Ciftcioglu, Oe.

    1996-03-01

    Kalman filtering approach for neural network training is described. Its extended form is used as an adaptive filter in a nonlinear environment of the form a feedforward neural network. Kalman filtering approach generally provides fast training as well as avoiding excessive learning which results in enhanced generalization capability. The network is used in a process monitoring application where the inputs are measurement signals. Since the measurement errors are also modelled in Kalman filter the approach yields accurate training with the implication of accurate neural network model representing the input and output relationships in the application. As the process of concern is a dynamic system, the input source of information to neural network is time dependent so that the training algorithm presents an adaptive form for real-time operation for the monitoring task. (orig.)

  20. Dimension Reduction Aided Hyperspectral Image Classification with a Small-sized Training Dataset: Experimental Comparisons

    Directory of Open Access Journals (Sweden)

    Jinya Su

    2017-11-01

    Full Text Available Hyperspectral images (HSI provide rich information which may not be captured by other sensing technologies and therefore gradually find a wide range of applications. However, they also generate a large amount of irrelevant or redundant data for a specific task. This causes a number of issues including significantly increased computation time, complexity and scale of prediction models mapping the data to semantics (e.g., classification, and the need of a large amount of labelled data for training. Particularly, it is generally difficult and expensive for experts to acquire sufficient training samples in many applications. This paper addresses these issues by exploring a number of classical dimension reduction algorithms in machine learning communities for HSI classification. To reduce the size of training dataset, feature selection (e.g., mutual information, minimal redundancy maximal relevance and feature extraction (e.g., Principal Component Analysis (PCA, Kernel PCA are adopted to augment a baseline classification method, Support Vector Machine (SVM. The proposed algorithms are evaluated using a real HSI dataset. It is shown that PCA yields the most promising performance in reducing the number of features or spectral bands. It is observed that while significantly reducing the computational complexity, the proposed method can achieve better classification results over the classic SVM on a small training dataset, which makes it suitable for real-time applications or when only limited training data are available. Furthermore, it can also achieve performances similar to the classic SVM on large datasets but with much less computing time.

  1. Multidisciplinary training in perineal care during labor and delivery for the reduction of anal sphincter injuries.

    Science.gov (United States)

    Frost, Jonathan; Gundry, Rowan; Young, Helen; Naguib, Adel

    2016-08-01

    To determine whether the introduction of a multidisciplinary intrapartum perineal-care training program reduced the rate of obstetric anal sphincter injuries in patients undergoing vaginal deliveries. A prospective observational cohort study enrolled women undergoing vaginal deliveries at a district general hospital maternity unit in the United Kingdom between April 1, 2012 and March 31, 2014. All women experiencing obstetric anal sphincter injuries during the study period were identified and the rate of obstetric anal sphincter injuries before (2012-2013) a multidisciplinary training program was implemented was compared with the rate after (2013-2014) implementation using logistic regression analysis. The study enrolled 4920 patients. Following the implementation of the training program, the rate of obstetric anal sphincter injuries decreased from 4.8% to 3.1% of vaginal deliveries (odds ratio 0.66; 95% confidence interval 0.493-0.899; P = 0.008). The integration of intrapartum perineal-care training into mandatory annual staff training was associated with a statistically and clinically significant reduction in the rate of obstetric anal sphincter injuries. Copyright © 2016 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

  2. Nuclear power plant personnel training process management system

    International Nuclear Information System (INIS)

    Arjona Vazquez, Orison; Venegas Bernal, Maria del Carmen; Armeteros Lopez, Ana L.

    1996-01-01

    The system in charge the management of the training process personnel from a nuclear power plant was designed taking into account all the requirements stated in the training guide for nuclear power plant personnel and their evaluation, which were prepared by the IAEA in 1995 in order to implement the SAT in the training programs for nuclear plant personnel. In the preparations of formats and elements that shape the system, account has been taken of the views expressed in such a guide, in some other bibliography that was consulted, and in the authors own opinion mainly with regard to those issues which the guide does not go deeper into

  3. Entrepreneurial training for girls empowerment in Lesotho: A process evaluation of a model programme.

    Science.gov (United States)

    Berry, Mary O'Neill; Kuriansky, Judy; Lytle, Megan; Vistman, Bozhena; Mosisili, 'Mathato S; Hlothoane, Lieketso; Matlanyane, Mapeo; Mokobori, Thabang; Mosuhli, Silas; Pebane, Jane

    2013-12-01

    A Girls Empowerment Programme held in 2010 in Lesotho, Sub-Saharan Africa, focused on HIV/AIDS risk reduction and prevention, life skills and entrepreneurial training (income-generating activities). Entrepreneurial training was a crucial part of equipping the camp attendees with basic skills to help them develop sustainable livelihoods. Such skills and financial independence are essential to enable rural girls to complete their secondary schooling (in a fee-based educational system) and to pursue a career, as well as to further help them be less susceptible to transactional sex and its significant risks. The results of a brief process evaluation with some nested supporting data showed considerable improvement in the girls' knowledge about income-generating activities. In addition, almost half of the camp attendees participated in further entrepreneurial training and about half of these girls went on to develop small businesses. Replication of this model of camp training is recommended and being explored in other African countries.

  4. Fast uncertainty reduction strategies relying on Gaussian process models

    International Nuclear Information System (INIS)

    Chevalier, Clement

    2013-01-01

    This work deals with sequential and batch-sequential evaluation strategies of real-valued functions under limited evaluation budget, using Gaussian process models. Optimal Stepwise Uncertainty Reduction (SUR) strategies are investigated for two different problems, motivated by real test cases in nuclear safety. First we consider the problem of identifying the excursion set above a given threshold T of a real-valued function f. Then we study the question of finding the set of 'safe controlled configurations', i.e. the set of controlled inputs where the function remains below T, whatever the value of some others non-controlled inputs. New SUR strategies are presented, together with efficient procedures and formulas to compute and use them in real world applications. The use of fast formulas to recalculate quickly the posterior mean or covariance function of a Gaussian process (referred to as the 'kriging update formulas') does not only provide substantial computational savings. It is also one of the key tools to derive closed form formulas enabling a practical use of computationally-intensive sampling strategies. A contribution in batch-sequential optimization (with the multi-points Expected Improvement) is also presented. (author)

  5. The role of emotions in the reduction of HIV/AIDS stigma among physicians in training.

    Science.gov (United States)

    Varas-Díaz, Nelson; Neilands, Torsten B; Rodríguez-Madera, Sheilla L; Padilla, Mark

    2016-01-01

    Scientific literature has systematically documented the negative effects of social stigma for people living with HIV/AIDS (PLWHA). HIV/AIDS stigma has the potential to negatively impact self-care strategies for those already affected, and simultaneously hinder prevention efforts to deter the emergence of new infections. When health professionals manifest these negative attitudes access to quality health-care and prevention strategies can be seriously affected. Scientifically tested interventions to reduce HIV/AIDS stigma among health professionals are still scarce. Although the number of tested interventions has increased over the past decade, few of them target Latino health professionals or Spanish-speaking populations. Furthermore, although some of those interventions have been reported as effective for stigma reduction, more work is needed to better understand the underlying variables that account for the reduction of stigma attitudes in those efforts. The SPACES intervention has been documented as an effective HIV/AIDS stigma-reduction intervention focusing on health-care professionals in training. The intervention, which is delivered in Spanish, has been previously tested with medical students in Puerto Rico and shown significant results in addressing negative attitudes toward PLWHA. The main objective of this study was to document the underlying variables that fostered reduction of HIV/AIDS stigma due to participation in the SPACES intervention. Results evidence that health professionals in training who participated in the intervention (n = 507) had less stigmatizing attitudes toward PLWHA due to an increase in their positive emotions toward this population. In light of these results, we discuss the importance of engaging health professionals in HIV/AIDS stigma-reduction interventions that go beyond the provision of information and skills for interacting with PLWHA, and address the emotional component of HIV/AIDS stigma.

  6. Carbon Dioxide Reduction Post-Processing Sub-System Development

    Science.gov (United States)

    Abney, Morgan B.; Miller, Lee A.; Greenwood, Zachary; Barton, Katherine

    2012-01-01

    The state-of-the-art Carbon Dioxide (CO2) Reduction Assembly (CRA) on the International Space Station (ISS) facilitates the recovery of oxygen from metabolic CO2. The CRA utilizes the Sabatier process to produce water with methane as a byproduct. The methane is currently vented overboard as a waste product. Because the CRA relies on hydrogen for oxygen recovery, the loss of methane ultimately results in a loss of oxygen. For missions beyond low earth orbit, it will prove essential to maximize oxygen recovery. For this purpose, NASA is exploring an integrated post-processor system to recover hydrogen from CRA methane. The post-processor, called a Plasma Pyrolysis Assembly (PPA) partially pyrolyzes methane to recover hydrogen with acetylene as a byproduct. In-flight operation of post-processor will require a Methane Purification Assembly (MePA) and an Acetylene Separation Assembly (ASepA). Recent efforts have focused on the design, fabrication, and testing of these components. The results and conclusions of these efforts will be discussed as well as future plans.

  7. COMPLEX SIMULATION MODEL OF TRAIN BREAKING-UP PROCESS AT THE HUMPS

    Directory of Open Access Journals (Sweden)

    E. B. Demchenko

    2015-11-01

    Full Text Available Purpose. One of the priorities of station sorting complex functioning improvement is the breaking-up process energy consumptions reduction, namely: fuel consumption for train pushing and electric energy consumption for cut braking. In this regard, an effective solution of the problem of energy consumption reduction at breaking-up subsystem requires a comprehensive handling of train pushing and cut rolling down processes. At the same time, the analysis showed that the current task of pushing process improvement and cut rolling down effectiveness increase are solved separately. To solve this problem it is necessary to develop the complex simulation model of train breaking up process at humps. Methodology. Pushing process simulation was done based on adapted under the shunting conditions traction calculations. In addition, the features of shunting locomotives work at the humps were taken into account. In order to realize the current pushing mode the special algorithm of hump locomotive controlling, which along with the safety shunting operation requirements takes into account behavioral factors associated with engineer control actions was applied. This algorithm provides train smooth acceleration and further movement with speed, which is close to the set speed. Hump locomotive fuel consumptions were determined based on the amount of mechanical work performed by locomotive traction. Findings. The simulation model of train pushing process was developed and combined with existing cut rolling down model. Cut initial velocity is determined during simulation process. The obtained initial velocity is used for further cut rolling process modeling. In addition, the modeling resulted in sufficiently accurate determination of the fuel rates consumed for train breaking-up. Originality. The simulation model of train breaking-up process at the humps, which in contrast to the existing models allows reproducing complexly all the elements of this process in detail

  8. EDF training process: From the training needs to the training requirements

    International Nuclear Information System (INIS)

    Poizat, C.

    2002-01-01

    The Training and Development Division - SFP - is the main EDF actor in the strategic skills development. It is the prime contractor designated by the Nuclear Generation Division DPN. The four main SFP goals for the period 2001/2003 are as followed: to satisfy our customers, to optimize and diversify our offer in reply to the needs of our customers and to adapt our skills, to improve our efficiency (cost-effectiveness ratio), and to reinforce the Quality Management of the SFP. The SFP has a quality policy ISO 9001 oriented. It is based on 6 commitments: to take into account the needs of each client regarding training, to insure the requirements of the quality approaches followed by our clients, to assist the national specifications in the training area, to inform SFP customers about the whole training offer, to give a first answer 8 days after each complaint, to provide trainees a good and adapted learning environment. A customers satisfaction survey twice a year and frequent internal and external audits and assessments guarantee these commitments.The main challenge for the Nuclear Generation Division - DPN - is to improve the performances in safety and competitiveness and to increase the professionalism of people involved. That is the reason why the partnership between the DPN and the SFP is now based on the skills management instead of the courses organisation

  9. Psychiatry training in the United Kingdom--part 2: the training process.

    Science.gov (United States)

    Christodoulou, N; Kasiakogia, K

    2015-01-01

    In the second part of this diptych, we shall deal with psychiatric training in the United Kingdom in detail, and we will compare it--wherever this is meaningful--with the equivalent system in Greece. As explained in the first part of the paper, due to the recently increased emigration of Greek psychiatrists and psychiatric trainees, and the fact that the United Kingdom is a popular destination, it has become necessary to inform those aspiring to train in the United Kingdom of the system and the circumstances they should expect to encounter. This paper principally describes the structure of the United Kingdom's psychiatric training system, including the different stages trainees progress through and their respective requirements and processes. Specifically, specialty and subspecialty options are described and explained, special paths in training are analysed, and the notions of "special interest day" and the optional "Out of programme experience" schemes are explained. Furthermore, detailed information is offered on the pivotal points of each of the stages of the training process, with special care to explain the important differences and similarities between the systems in Greece and the United Kingdom. Special attention is given to The Royal College of Psychiatrists' Membership Exams (MRCPsych) because they are the only exams towards completing specialisation in Psychiatry in the United Kingdom. Also, the educational culture of progressing according to a set curriculum, of utilising diverse means of professional development, of empowering the trainees' autonomy by allowing initiative-based development and of applying peer supervision as a tool for professional development is stressed. We conclude that psychiatric training in the United Kingdom differs substantially to that of Greece in both structure and process. Τhere are various differences such as pure psychiatric training in the United Kingdom versus neurological and medical modules in Greece, in-training

  10. INNOVATIVE TENDENCIES OF FUTURE MUSIC TEACHERS’ SINGING TRAINING IN THE PROCESS OF PROFESSIONAL TRAINING

    Directory of Open Access Journals (Sweden)

    Si Daofen

    2017-04-01

    Full Text Available In the article the innovative tendencies of singing training of Art institutes students at pedagogical universities is presented. The issue introduced in the article is relevant as processes of modernization of higher art and pedagogical education require implementing new scientific approaches and innovative technologies into future music teachers’ training to ensure the comprehensive development of a young generation in modern conditions. So the aim of the article is to disclose the main features of implementing innovative technologies into future music teachers’ training. The analysis of pedagogical and psychological literature shows that the main features of methodological training to work with schoolchildren are the following: mastering professional knowledge, taking into account characteristics of adults’ and children’s phonation; considering aesthetical and value qualities of vocal sound according to modern standards of singers’ training; comprehensive development of vocal, melodic and harmonic hearing; an ability to get schoolchildren’s correct vocal sound; developing skills of methodological analysis of singing process. Due to analysis of scientific works by V. Antoniuk, N. Hrebeniuk, V. Morozov it is reported that efficiency of students and singers’ performance depends on their readiness to make independent decisions in practical creative and performing process, that is a general tendency in the singing training. That’s why one of the main objectives of future music teacher training to performing activities during the years of study is thought to be developing singers’ independence. Among the most effective innovative technologies of future music teachers’ singing training the author proposes technologies of vocal and choral performance by V. Yemelianova, V. Morozova, H. Struve. It is proved that none of innovative concepts, discussed in the article, cannot be mechanically implemented in current national conditions

  11. Feedback Specificity, Information Processing, and Transfer of Training

    Science.gov (United States)

    Goodman, Jodi S.; Wood, Robert E.; Chen, Zheng

    2011-01-01

    This study examines the effects of feedback specificity on transfer of training and the mechanisms through which feedback can enhance or inhibit transfer. We used concurrent verbal protocol methodology to elicit and operationalize the explicit information processing activities used by 48 trainees performing the Furniture Factory computer…

  12. Participation in decision-making process, incentives and training as ...

    African Journals Online (AJOL)

    Participation in decision-making process, incentives and training as predictors of organizational commitment among industrial workers. ... African Journal for the Psychological Study of Social Issues ... Results indicated that the three motivational factors jointly and significantly predicted organizational commitment. Also, each ...

  13. Issues of IT-Professionals Training in Traditional Educational Process

    Science.gov (United States)

    Eminov, Farid; Golitsyna, Irina

    2017-01-01

    The paper presents issues of modern IT-specialists training. Formation of information-educational environment of IT-professionals is discussed. Studying of enterprise infocommunication infrastructure and its management features within a framework of the traditional educational process is considered. [For the complete proceedings, see ED579395.

  14. Harmonizing the Writing Process with Music Training Techniques

    Science.gov (United States)

    Riecken, Nancy

    2009-01-01

    Can music help students become better thinkers and writers? Over the past three years, the author has incorporated some basic music training techniques in her classrooms to help her teach the writing process to students who would otherwise click her off. The students have developed clearer thinking and organizational skills, and have increased…

  15. Designing Training for Temporal and Adaptive Transfer: A Comparative Evaluation of Three Training Methods for Process Control Tasks

    Science.gov (United States)

    Kluge, Annette; Sauer, Juergen; Burkolter, Dina; Ritzmann, Sandrina

    2010-01-01

    Training in process control environments requires operators to be prepared for temporal and adaptive transfer of skill. Three training methods were compared with regard to their effectiveness in supporting transfer: Drill & Practice (D&P), Error Training (ET), and procedure-based and error heuristics training (PHT). Communication…

  16. Gender and poverty reduction strategy processes in Latin America

    OpenAIRE

    Dijkstra, Geske

    2007-01-01

    textabstractIn 1999, countries that wished to qualify for the Enhanced Initiative for the Heavily Indebted Poor Countries (HIPC initiative) had to elaborate Poverty Reduction Strategy Papers (PRSP) and had to do so with participation of civil society. Since then, the elaboration and subsequent implementation of PRSs (Poverty Reduction Strategies)have been seen as a tool for the international donor community to guarantee that not only debt relief, but also aid in general would be spent well. T...

  17. The CREST Simulation Development Process: Training the Next Generation.

    Science.gov (United States)

    Sweet, Robert M

    2017-04-01

    The challenges of training and assessing endourologic skill have driven the development of new training systems. The Center for Research in Education and Simulation Technologies (CREST) has developed a team and a methodology to facilitate this development process. Backwards design principles were applied. A panel of experts first defined desired clinical and educational outcomes. Outcomes were subsequently linked to learning objectives. Gross task deconstruction was performed, and the primary domain was classified as primarily involving decision-making, psychomotor skill, or communication. A more detailed cognitive task analysis was performed to elicit and prioritize relevant anatomy/tissues, metrics, and errors. Reference anatomy was created using a digital anatomist and clinician working off of a clinical data set. Three dimensional printing can facilitate this process. When possible, synthetic or virtual tissue behavior and textures were recreated using data derived from human tissue. Embedded sensors/markers and/or computer-based systems were used to facilitate the collection of objective metrics. A learning Verification and validation occurred throughout the engineering development process. Nine endourology-relevant training systems were created by CREST with this approach. Systems include basic laparoscopic skills (BLUS), vesicourethral anastomosis, pyeloplasty, cystoscopic procedures, stent placement, rigid and flexible ureteroscopy, GreenLight PVP (GL Sim), Percutaneous access with C-arm (CAT), Nephrolithotomy (NLM), and a vascular injury model. Mixed modalities have been used, including "smart" physical models, virtual reality, augmented reality, and video. Substantial validity evidence for training and assessment has been collected on systems. An open source manikin-based modular platform is under development by CREST with the Department of Defense that will unify these and other commercial task trainers through the common physiology engine, learning

  18. Academic Training: Real Time Process Control - Lecture series

    CERN Multimedia

    Françoise Benz

    2004-01-01

    ACADEMIC TRAINING LECTURE REGULAR PROGRAMME 7, 8 and 9 June From 11:00 hrs to 12:00 hrs - Main Auditorium bldg. 500 Real Time Process Control T. Riesco / CERN-TS What exactly is meant by Real-time? There are several definitions of real-time, most of them contradictory. Unfortunately the topic is controversial, and there does not seem to be 100% agreement over the terminology. Real-time applications are becoming increasingly important in our daily lives and can be found in diverse environments such as the automatic braking system on an automobile, a lottery ticket system, or robotic environmental samplers on a space station. These lectures will introduce concepts and theory like basic concepts timing constraints, task scheduling, periodic server mechanisms, hard and soft real-time.ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

  19. Reduction of Interhemispheric Functional Connectivity in Sensorimotor and Visual Information Processing Pathways in Schizophrenia

    Directory of Open Access Journals (Sweden)

    Xu Lang

    2016-01-01

    Conclusions: Interhemispheric functional connectivity in the sensorimotor and visual processing pathways was reduced in patients with schizophrenia, but this reduction was unrelated to the disease state; thus, this reduction may serve as a trait marker of schizophrenia.

  20. Behaviour of actinide elements in the lithium reduction process. 1. Feasibility of the Li reduction process to UO2 and PuO2

    International Nuclear Information System (INIS)

    Usami, Tuyoshi; Kurata, Masateru; Yuda, Ryoichi; Kato, Tetsuya; Inoue, Tadashi; Sims, Howard; Jenkins, Jon

    2000-01-01

    Lithium reduction process has been developed to apply pyrochemical recycle process for oxide fuels. This process uses lithium metal as a reductant to convert oxides of actinide elements to metal. Lithium oxide generated in the reduction is to be dissolved in a molten lithium chloride bath to enhance reduction. The authors have measured the solubility of lithium oxide in lithium chloride, and then reduced uranium dioxide and plutonium dioxide. The solubility measured at 923 K was 8.8 wt.%. The uranium dioxide was completely reduced with no intermediate products and formed porous metal. Plutonium dioxide including 3% of americium dioxide was also reduced completely and formed molten metal. Even lithium oxide was just under saturation , plutonium could be reduced to metal. Shown from this result was easier reduction than predicted from thermodynamic data. Americium dioxide was also reduced at 1.8 wt% lithium oxide, but was not reduced at 8.8 wt.%. (author)

  1. TRAUMATISM IN TRAINING PROCESS OF STUDENTS - VOLLEYBALL PLAYERS

    Directory of Open Access Journals (Sweden)

    V.Ya. Kovalchuk

    2017-01-01

    Full Text Available Purpose: to analyze traumas in training process of students-volleyball players. Material: 42 students participated in the research. Students’ medical records were analyzed in the research. Results: with every year of study in university the quantity of traumas decreased. In 1st year students we found 10 traumas, in 4th year - 5. Ligament sprains are the most frequent kinds of traumas. In total we found 33.3%. Their main part covers ankle joint traumas. The reasons of them are bursts, stops, changes of movements’ direction. Rather frequents (30% are maims of knee and elbow joints, caused by falling down. The degree of joints’ injury is, as usually, negligible. The highest quantity of moderate and heavy traumas was among 1st year students (9 from 10 and 2nd year students (8 from 8. Conclusions: prophylaxis complex for prevention of volleyball traumas has been offered. Volleyball traumas’ prevention implies improvement methodic and technique of students-volleyball players’ training. The main reasons of traumatism are the following: non observation of sports training principles; poor organizational and logistical support of training process.

  2. Research staff training in a multisite randomized clinical trial: Methods and recommendations from the Stimulant Reduction Intervention using Dosed Exercise (STRIDE) trial.

    Science.gov (United States)

    Walker, Robrina; Morris, David W; Greer, Tracy L; Trivedi, Madhukar H

    2014-01-01

    Descriptions of and recommendations for meeting the challenges of training research staff for multisite studies are limited despite the recognized importance of training on trial outcomes. The STRIDE (STimulant Reduction Intervention using Dosed Exercise) study is a multisite randomized clinical trial that was conducted at nine addiction treatment programs across the United States within the National Drug Abuse Treatment Clinical Trials Network (CTN) and evaluated the addition of exercise to addiction treatment as usual (TAU), compared to health education added to TAU, for individuals with stimulant abuse or dependence. Research staff administered a variety of measures that required a range of interviewing, technical, and clinical skills. In order to address the absence of information on how research staff are trained for multisite clinical studies, the current manuscript describes the conceptual process of training and certifying research assistants for STRIDE. Training was conducted using a three-stage process to allow staff sufficient time for distributive learning, practice, and calibration leading up to implementation of this complex study. Training was successfully implemented with staff across nine sites. Staff demonstrated evidence of study and procedural knowledge via quizzes and skill demonstration on six measures requiring certification. Overall, while the majority of staff had little to no experience in the six measures, all research assistants demonstrated ability to correctly and reliably administer the measures throughout the study. Practical recommendations are provided for training research staff and are particularly applicable to the challenges encountered with large, multisite trials.

  3. Uranium tetrafluoride reduction closed bomb. Part I: Reduction process general conditions

    International Nuclear Information System (INIS)

    Anca Abati, R.; Lopez Rodriguez, M.

    1961-01-01

    General conditions about the metallo thermic reduction in small bombs (250 and 800 gr. of uranium) has been investigated. Factors such as kind and granulometry of the magnesium used, magnesium excess and preheating temperature, which affect yields and metal quality have been considered. magnesium excess increased yields in a 15% in the small bomb, about the preheating temperature, there is a range between which yields and metal quality does not change. All tests have been made with graphite linings. (Author) 18 refs

  4. Exercise training attenuates chemoreflex-mediated reductions of renal blood flow in heart failure.

    Science.gov (United States)

    Marcus, Noah J; Pügge, Carolin; Mediratta, Jai; Schiller, Alicia M; Del Rio, Rodrigo; Zucker, Irving H; Schultz, Harold D

    2015-07-15

    In chronic heart failure (CHF), carotid body chemoreceptor (CBC) activity is increased and contributes to increased tonic and hypoxia-evoked elevation in renal sympathetic nerve activity (RSNA). Elevated RSNA and reduced renal perfusion may contribute to development of the cardio-renal syndrome in CHF. Exercise training (EXT) has been shown to abrogate CBC-mediated increases in RSNA in experimental heart failure; however, the effect of EXT on CBC control of renal blood flow (RBF) is undetermined. We hypothesized that CBCs contribute to tonic reductions in RBF in CHF, that stimulation of the CBC with hypoxia would result in exaggerated reductions in RBF, and that these responses would be attenuated with EXT. RBF was measured in CHF-sedentary (SED), CHF-EXT, CHF-carotid body denervation (CBD), and CHF-renal denervation (RDNX) groups. We measured RBF at rest and in response to hypoxia (FiO2 10%). All animals exhibited similar reductions in ejection fraction and fractional shortening as well as increases in ventricular systolic and diastolic volumes. Resting RBF was lower in CHF-SED (29 ± 2 ml/min) than in CHF-EXT animals (46 ± 2 ml/min, P < 0.05) or in CHF-CBD animals (42 ± 6 ml/min, P < 0.05). In CHF-SED, RBF decreased during hypoxia, and this was prevented in CHF-EXT animals. Both CBD and RDNX abolished the RBF response to hypoxia in CHF. Mean arterial pressure increased in response to hypoxia in CHF-SED, but was prevented by EXT, CBD, and RDNX. EXT is effective in attenuating chemoreflex-mediated tonic and hypoxia-evoked reductions in RBF in CHF. Copyright © 2015 the American Physiological Society.

  5. Aerobic Interval Exercise Training Induces Greater Reduction in Cardiac Workload in the Recovery Period in Rats

    International Nuclear Information System (INIS)

    Borges, Juliana Pereira; Masson, Gustavo Santos; Tibiriçá, Eduardo; Lessa, Marcos Adriano

    2014-01-01

    Aerobic interval exercise training has greater benefits on cardiovascular function as compared with aerobic continuous exercise training. The present study aimed at analyzing the effects of both exercise modalities on acute and subacute hemodynamic responses of healthy rats. Thirty male rats were randomly assigned into three groups as follows: continuous exercise (CE, n = 10); interval exercise (IE, n = 10); and control (C, n = 10). Both IE and CE groups performed a 30-minute exercise session. The IE group session consisted of three successive 4-minute periods at 60% of maximal velocity (Max Vel), with 4-minute recovery intervals at 40% of Max Vel. The CE group ran continuously at 50% of Max Vel. Heart rate (HR), blood pressure(BP), and rate pressure product (RPP) were measured before, during and after the exercise session. The CE and IE groups showed an increase in systolic BP and RPP during exercise as compared with the baseline values. After the end of exercise, the CE group showed a lower response of systolic BP and RPP as compared with the baseline values, while the IE group showed lower systolic BP and mean BP values. However, only the IE group had a lower response of HR and RPP during recovery. In healthy rats, one interval exercise session, as compared with continuous exercise, induced similar hemodynamic responses during exercise. However, during recovery, the interval exercise caused greater reductions in cardiac workload than the continuous exercise

  6. Aerobic Interval Exercise Training Induces Greater Reduction in Cardiac Workload in the Recovery Period in Rats

    Science.gov (United States)

    Borges, Juliana Pereira; Masson, Gustavo Santos; Tibiriçá, Eduardo; Lessa, Marcos Adriano

    2014-01-01

    Background Aerobic interval exercise training has greater benefits on cardiovascular function as compared with aerobic continuous exercise training. Objective The present study aimed at analyzing the effects of both exercise modalities on acute and subacute hemodynamic responses of healthy rats. Methods Thirty male rats were randomly assigned into three groups as follows: continuous exercise (CE, n = 10); interval exercise (IE, n = 10); and control (C, n = 10). Both IE and CE groups performed a 30-minute exercise session. The IE group session consisted of three successive 4-minute periods at 60% of maximal velocity (Max Vel), with 4-minute recovery intervals at 40% of Max Vel. The CE group ran continuously at 50% of Max Vel. Heart rate (HR), blood pressure(BP), and rate pressure product (RPP) were measured before, during and after the exercise session. Results The CE and IE groups showed an increase in systolic BP and RPP during exercise as compared with the baseline values. After the end of exercise, the CE group showed a lower response of systolic BP and RPP as compared with the baseline values, while the IE group showed lower systolic BP and mean BP values. However, only the IE group had a lower response of HR and RPP during recovery. Conclusion In healthy rats, one interval exercise session, as compared with continuous exercise, induced similar hemodynamic responses during exercise. However, during recovery, the interval exercise caused greater reductions in cardiac workload than the continuous exercise. PMID:24270864

  7. Aerobic Interval Exercise Training Induces Greater Reduction in Cardiac Workload in the Recovery Period in Rats

    Energy Technology Data Exchange (ETDEWEB)

    Borges, Juliana Pereira, E-mail: julipborges@gmail.com; Masson, Gustavo Santos; Tibiriçá, Eduardo; Lessa, Marcos Adriano [Instituto Oswaldo Cruz - FIOCRUZ, Rio de Janeiro, RJ (Brazil)

    2014-01-15

    Aerobic interval exercise training has greater benefits on cardiovascular function as compared with aerobic continuous exercise training. The present study aimed at analyzing the effects of both exercise modalities on acute and subacute hemodynamic responses of healthy rats. Thirty male rats were randomly assigned into three groups as follows: continuous exercise (CE, n = 10); interval exercise (IE, n = 10); and control (C, n = 10). Both IE and CE groups performed a 30-minute exercise session. The IE group session consisted of three successive 4-minute periods at 60% of maximal velocity (Max Vel), with 4-minute recovery intervals at 40% of Max Vel. The CE group ran continuously at 50% of Max Vel. Heart rate (HR), blood pressure(BP), and rate pressure product (RPP) were measured before, during and after the exercise session. The CE and IE groups showed an increase in systolic BP and RPP during exercise as compared with the baseline values. After the end of exercise, the CE group showed a lower response of systolic BP and RPP as compared with the baseline values, while the IE group showed lower systolic BP and mean BP values. However, only the IE group had a lower response of HR and RPP during recovery. In healthy rats, one interval exercise session, as compared with continuous exercise, induced similar hemodynamic responses during exercise. However, during recovery, the interval exercise caused greater reductions in cardiac workload than the continuous exercise.

  8. The Eco Logic gas-phase chemical reduction process

    International Nuclear Information System (INIS)

    Hallett, D.J.; Campbell, K.R.

    1994-01-01

    Since 1986, Eco Logic has conducted research with the aim of developing a new technology for destroying aqueous organic wastes, such as contaminated harbor sediments, landfill soil and leachates, and lagoon sludges. The goal was a commercially-viable chemical process that could deal with these watery wastes and also process stored wastes. The process described in this paper was developed with a view to avoiding the expense and technical drawbacks of incinerators, while still providing high destruction efficiencies and waste volume capabilities. A lab-scale process unit was constructed in 1988 and tested extensively. Based on the results of these tests, it was decided to construct a mobile pilot-scale unit that could be used for further testing and ultimately for small commercial waste processing operations. It was taken through a preliminary round of tests at Hamilton Harbour, Ontario, where the waste processed was coal-tar-contaminated harbor sediment. In 1992, the same unit was taken through a second round of tests in Bay City, Michigan. In this test program, the pilot-scale unit processed PCBs in aqueous, organic and soil matrices. This paper describes the process reactions and the pilot-scale process unit, and presents the results of pilot-scale testing thus far

  9. Effectiveness of stress management training on stress reduction in pregnant women

    Directory of Open Access Journals (Sweden)

    Mahboobeh Shirazi

    2016-10-01

    Full Text Available Background: There are evidences that suggest the impact of stress on pregnancy outcome. Prolong antenatal depression and anxiety may cause lots of adverse pregnancy outcomes such as abortion, still birth, low birth weight and preterm labor. The aim of this pre-posttest randomized control trial study was to determine the role of stress management training in the first trimester on stress reduction in pregnant women referring to General Yas Women Hospital related to Tehran University of Medical Sciences in Tehran, Iran, from May 2014 to January 2016. Methods: Anxiety status of 75 pregnant women in the first trimester was assessed by standard anxiety questioner using Hamilton anxiety rating score. Scores 18-25, 25-35 and >35 were considered for mild, moderate and severe anxiety, respectively. According to the level of anxiety, women with moderate and severe anxiety as the interventional group were arranged for participation in stress management workshops, applying mindfulness technique including: body scan, setting meditation and passing thought technique in 5 an hour sessions. For this experimental group were made available CD training for practicing lessons during the week. All groups didn’t need to medical treatment according to the psychiatrist interview. In the ending of therapy, clinical groups were assessed by anxiety scale again. Women with mild anxiety as the control group received only regular prenatal care without any psychological interventions. The validity and reliability of questioner were approved by experts in this field. This research was supported by Tehran University of Medical Sciences and Health Services grant and also the study approved by ethics committee of Tehran University of Medical Sciences. Data were analyzed using the statistical software SPSS version 18, and Student’s t-test analyses were performed. Results: The level of anxiety and stress was decreased significantly between women in clinical groups, 27.5 to 14

  10. Recovery of Work-Related Stress: Complaint Reduction and Work-Resumption are Relatively Independent Processes

    NARCIS (Netherlands)

    Vente, W. de; Kamphuis, J.H.; Blonk, R.W.; Emmelkamp, P.M.

    2015-01-01

    Purpose The process of recovery from work-related stress, consisting of complaint reduction and work-resumption, is not yet fully understood. The aim of this study was to investigate predictors of complaint reduction and work-resumption, as well as testing complaint reduction as a mediator in the

  11. Recovery of work-related stress: Complaint reduction and work-resumption are relatively independent processes

    NARCIS (Netherlands)

    de Vente, W.; Kamphuis, J.H.; Blonk, R.W.B.; Emmelkamp, P.M.G.

    2015-01-01

    Purpose: The process of recovery from work-related stress, consisting of complaint reduction and work-resumption, is not yet fully understood. The aim of this study was to investigate predictors of complaint reduction and work-resumption, as well as testing complaint reduction as a mediator in the

  12. Biogeochemical Processes Controlling Microbial Reductive Precipitation of Radionuclides

    International Nuclear Information System (INIS)

    Fredrickson, James K.; Brooks, Scott C.

    2004-01-01

    This project is focused on elucidating the principal biogeochemical reactions that govern the concentrations, chemical speciation, and distribution of the redox sensitive contaminants uranium (U) and technetium (Tc) between the aqueous and solid phases. The research is designed to provide new insights into the under-explored areas of competing geochemical and microbiological oxidation-reduction reactions that govern the fate and transport of redox sensitive contaminants and to generate fundamental scientific understanding of the identity and stoichiometry of competing microbial reduction and geochemical oxidation reactions. These goals and objectives are met through a series of hypothesis-driven tasks that focus on (1) the use of well-characterized microorganisms and synthetic and natural mineral oxidants, (2) advanced spectroscopic and microscopic techniques to monitor redox transformations of U and Tc, and (3) the use of flow-through experiments to more closely approximate groundwater environments. The results are providing an improved understanding and predictive capability of the mechanisms that govern the redox dynamics of radionuclides in subsurface environments. For purposes of this poster, the results are divided into three sections: (1) influence of Ca on U(VI) bioreduction; (2) localization of biogenic UO 2 and TcO 2 ; and (3) reactivity of Mn(III/IV) oxides.

  13. From Humanizing the Educational Process to Professionally Mobile Specialists Training

    Directory of Open Access Journals (Sweden)

    T. A. Fugelova

    2012-01-01

    Full Text Available Training professional mobile specialists capable of responding flexibly to dynamic changes in society is considered to be the most important issue of the modern educational system. The paper justifies the idea that technical universities should take responsibility for solving this problem by means of humanization of technical education, which implies reconsidering its values and general notions. For overcoming the technocratic trends, the author recommends to cultivate the value of professionalism in the humanization context.Professionalism is defined by using the «professional service» idea as a «purpose acknowledgment, supertask, even a mission». The main components of the above attitude lie in finding the harmony with the world and its basic values. Therefore, technical universities face the challenge of training people of intelligence with a high moral and business responsibility. The basic value of such a person is regarded as «dedication to the cause» - the constant desire to improve the world and leave behind them- selves something of value to society. For training such specialists, the educational process should provide teachers dialogue and collaboration with students to facilitate the process of self-determination and self-development of the prospective specialists. 

  14. Analysis of profitability and poverty reduction of yoghurt processing ...

    African Journals Online (AJOL)

    The study assessed the profitability of yoghurt processing with a view of determining its potentials for reducing poverty in Maiduguri Metropolitan Area. Data were collected from a survey of 10 yoghurt processing firms in Maiduguri and analysed using profit model and descriptive statistics. Results revealed that yoghurt ...

  15. DESIGNING SUSTAINABLE PROCESSES WITH SIMULATION: THE WASTE REDUCTION (WAR) ALGORITHM

    Science.gov (United States)

    The WAR Algorithm, a methodology for determining the potential environmental impact (PEI) of a chemical process, is presented with modifications that account for the PEI of the energy consumed within that process. From this theory, four PEI indexes are used to evaluate the envir...

  16. State Space Reduction of Linear Processes using Control Flow Reconstruction

    NARCIS (Netherlands)

    van de Pol, Jan Cornelis; Timmer, Mark

    2009-01-01

    We present a new method for fighting the state space explosion of process algebraic specifications, by performing static analysis on an intermediate format: linear process equations (LPEs). Our method consists of two steps: (1) we reconstruct the LPE's control flow, detecting control flow parameters

  17. State Space Reduction of Linear Processes Using Control Flow Reconstruction

    NARCIS (Netherlands)

    van de Pol, Jan Cornelis; Timmer, Mark; Liu, Zhiming; Ravn, Anders P.

    2009-01-01

    We present a new method for fighting the state space explosion of process algebraic specifications, by performing static analysis on an intermediate format: linear process equations (LPEs). Our method consists of two steps: (1) we reconstruct the LPE's control flow, detecting control flow parameters

  18. Modelling of slag emulsification and slag reduction in CAS-OB process

    OpenAIRE

    Sulasalmi, P. (Petri)

    2016-01-01

    Abstract Composition Adjustment by Sealed argon bubbling – Oxygen Blowing (CAS-OB) process is a ladle treatment process that was developed for chemical heating and alloying of steel. The main stages of the process are heating, (possible) alloying and reduction of slag. The CAS-OB process aims for homogenization and control of the composition and temperature of steel. In this dissertation, a mathematical reaction model was developed for the slag reduction stage of the CAS-OB process. Sl...

  19. The Development and Evaluation of a Multimedia Resource To Support ICT Training: Design Issues, Training Processes and User Experiences.

    Science.gov (United States)

    Tearle, Penni; Dillon, Patrick

    2001-01-01

    Addresses issues surrounding the process of information and communications technology training (ICT), and the application of training outcomes in the workplace. Provides an overview of content and design features of the multimedia resource "Ensuring Effectiveness of ICT Training" and reports on its evaluation. Discusses design issues, training…

  20. Electrocatalytic reduction of carbon dioxide under plasma DBD process

    International Nuclear Information System (INIS)

    Amouroux, Jacques; Cavadias, Simeon

    2017-01-01

    Carbon dioxide can be converted, by reaction with hydrogen, into fine chemicals and liquid fuels such as methanol and DME. Methane production by the Sabatier reaction opens the way of carbon recycling for a circular economy of carbon resources. The catalytic process of methanation of carbon dioxide produces two molecules of water as a by-product. A current limitation in the CO 2 methanation is the ageing of catalysts, mainly due to water adsorption during the process. To avoid this adsorption, the process is operated at high temperature (300 °C–400 °C), leading to carbon deposition on the catalyst and its deactivation. To overcome this problem, a methanation plasma-catalytic process has been developed, which achieves high CO 2 conversion rate (80%), and a selectivity close to 100%, working from room temperature to 150 °C, instead of 300 °C–400 °C for the thermal catalytic process. The main characteristics of this process are high-voltage pulses of few nanoseconds duration, activating the adsorption of CO 2 in bent configuration and the polarization of the catalyst. The key step in this process is the desorption of water from the polarized catalyst. The high CO 2 conversion at low temperature could be explained by the creation of a plasma inside the nanopores of the catalyst. (paper)

  1. Electrocatalytic reduction of carbon dioxide under plasma DBD process

    Science.gov (United States)

    Amouroux, Jacques; Cavadias, Simeon

    2017-11-01

    Carbon dioxide can be converted, by reaction with hydrogen, into fine chemicals and liquid fuels such as methanol and DME. Methane production by the Sabatier reaction opens the way of carbon recycling for a circular economy of carbon resources. The catalytic process of methanation of carbon dioxide produces two molecules of water as a by-product. A current limitation in the CO2 methanation is the ageing of catalysts, mainly due to water adsorption during the process. To avoid this adsorption, the process is operated at high temperature (300 °C-400 °C), leading to carbon deposition on the catalyst and its deactivation. To overcome this problem, a methanation plasma-catalytic process has been developed, which achieves high CO2 conversion rate (80%), and a selectivity close to 100%, working from room temperature to 150 °C, instead of 300 °C-400 °C for the thermal catalytic process. The main characteristics of this process are high-voltage pulses of few nanoseconds duration, activating the adsorption of CO2 in bent configuration and the polarization of the catalyst. The key step in this process is the desorption of water from the polarized catalyst. The high CO2 conversion at low temperature could be explained by the creation of a plasma inside the nanopores of the catalyst.

  2. PCDD/PCDF reduction by the co-combustion process.

    Science.gov (United States)

    Lee, Vinci K C; Cheung, Wai-Hung; McKay, Gordon

    2008-01-01

    A novel process, termed the co-combustion process, has been developed and designed to utilise the thermal treatment of municipal solid waste (MSW) in cement clinker production and reduce PCDD/PCDF emissions. To test the conceptual design; detailed engineering design of the process and equipment was performed and a pilot plant was constructed to treat up to 40 tonnes MSW per day. The novel process features included several units external to the main traditional cement rotary kiln: an external calcinations unit in which the hot gas calcined the limestone thus making significant energy savings for this chemical reaction; the lime generated was used in a second chamber to act as a giant acid gas scrubber to remove SOx and particularly HCl (a source of chloride); an external rotary kiln and secondary combustion unit capable of producing a hot gas at 1200 degrees C; a gas cooler to simulate a boiler turbogenerator set for electricity generation; the incorporation of some of the bottom ash, calcined lime and dust collector solids into the cement clinker. A PCDD/PCDF inventory has been completed for the entire process and measured PCDD/PCDF emissions were 0.001 ng I-TEQ/Nm(3) on average which is 1% of the best practical means [Hong Kong Environmental Protection Department, 2001. A guidance note on the best practicable means for incinerators (municipal waste incineration), BPM12/1] MSW incineration emission limit values.

  3. INCORPORATING ENVIRONMENTAL AND ECONOMIC CONSIDERATIONS INTO PROCESS DESIGN: THE WASTE REDUCTION (WAR) ALGORITHM

    Science.gov (United States)

    A general theory known as the WAste Reduction (WASR) algorithm has been developed to describe the flow and the generation of potential environmental impact through a chemical process. This theory integrates environmental impact assessment into chemical process design Potential en...

  4. Review on the processes of reduction and refining of metallic vanadium

    International Nuclear Information System (INIS)

    Mourao, M.B.; Capocchi, J.D.T.

    1982-01-01

    A literature survey on the processes of vanadium reduction and refining is presented. The results achieved by several research workers are comented. Enphasis is given to the aluminothermic reduction of V 2 O 5 followed by purification of the crude metal in an electron beam melting furnace or by high temperature molten salts electrolitic processes. (Author) [pt

  5. Vehicle Lightweighting: Mass Reduction Spectrum Analysis and Process Cost Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Mascarin, Anthony [IBIS Associates, Inc., Waltham, MA (United States); Hannibal, Ted [IBIS Associates, Inc., Waltham, MA (United States); Raghunathan, Anand [Energetics Inc., Columbia, MD (United States); Ivanic, Ziga [Energetics Inc., Columbia, MD (United States); Clark, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    The U.S. Department of Energy’s Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. In the first two phases of this effort examined combinations of strategies aimed at achieving strategic targets of 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. These results have been reported in the Idaho National Laboratory report INL/EXT-14-33863 entitled Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting published in March 2015. The data for these strategies were drawn from many sources, including Lotus Engineering Limited and FEV, Inc. lightweighting studies, U.S. Department of Energy-funded Vehma International of America, Inc./Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, many United States Council for Automotive Research’s/United States Automotive Materials Partnership LLC lightweight materials programs, and IBIS Associates, Inc.’s decades of experience in automotive lightweighting and materials substitution analyses.

  6. Vehicle Lightweighting: Mass Reduction Spectrum Analysis and Process Cost Modeling

    International Nuclear Information System (INIS)

    Mascarin, Anthony; Hannibal, Ted; Raghunathan, Anand; Ivanic, Ziga; Clark, Michael

    2016-01-01

    The U.S. Department of Energy's Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. In the first two phases of this effort examined combinations of strategies aimed at achieving strategic targets of 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. These results have been reported in the Idaho National Laboratory report INL/EXT-14-33863 entitled Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting published in March 2015. The data for these strategies were drawn from many sources, including Lotus Engineering Limited and FEV, Inc. lightweighting studies, U.S. Department of Energy-funded Vehma International of America, Inc./Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, many United States Council for Automotive Research's/United States Automotive Materials Partnership LLC lightweight materials programs, and IBIS Associates, Inc.'s decades of experience in automotive lightweighting and materials substitution analyses.

  7. The Process of Fear Reduction Through Systematic Desensitization

    Science.gov (United States)

    Schroeder, Harold E.; Rich, Alex R.

    1976-01-01

    This study investigated the process of fear change during a course of systematic desensitization therapy. Behavioral, subjective, and physiological measures of fear were taken following each of eight therapy sessions. Changes in one fear system did not appear to be primary in initiating changes in the other fear systems. (Author)

  8. A Comparison of Paraprofessionally Trained and Self-Instructed Relaxation Training for the Reduction in Frequency of Tension Headaches.

    Science.gov (United States)

    Hartman, Bruce W.; Utz, Patrick W.

    Previous research has demonstrated the effectiveness of using paraprofessional trainers in teaching students with tension headaches to relax, thus reducing the frequency of their headaches. A technique for automated self-instructed relaxation training was compared to a paraprofessionally trained group and a no-treatment control group over a 3-week…

  9. Reduction of produced elementary sulfur in denitrifying sulfide removal process.

    Science.gov (United States)

    Zhou, Xu; Liu, Lihong; Chen, Chuan; Ren, Nanqi; Wang, Aijie; Lee, Duu-Jong

    2011-05-01

    Denitrifying sulfide removal (DSR) processes simultaneously convert sulfide, nitrate, and chemical oxygen demand from industrial wastewater into elemental sulfur, dinitrogen gas, and carbon dioxide, respectively. The failure of a DSR process is signaled by high concentrations of sulfide in reactor effluent. Conventionally, DSR reactor failure is blamed for overcompetition for heterotroph to autotroph communities. This study indicates that the elementary sulfur produced by oxidizing sulfide that is a recoverable resource from sulfide-laden wastewaters can be reduced back to sulfide by sulfur-reducing Methanobacterium sp. The Methanobacterium sp. was stimulated with excess organic carbon (acetate) when nitrite was completely consumed by heterotrophic denitrifiers. Adjusting hydraulic retention time of a DSR reactor when nitrite is completely consumed provides an additional control variable for maximizing DSR performance.

  10. Uncertainty Reduction for Stochastic Processes on Complex Networks

    Science.gov (United States)

    Radicchi, Filippo; Castellano, Claudio

    2018-05-01

    Many real-world systems are characterized by stochastic dynamical rules where a complex network of interactions among individual elements probabilistically determines their state. Even with full knowledge of the network structure and of the stochastic rules, the ability to predict system configurations is generally characterized by a large uncertainty. Selecting a fraction of the nodes and observing their state may help to reduce the uncertainty about the unobserved nodes. However, choosing these points of observation in an optimal way is a highly nontrivial task, depending on the nature of the stochastic process and on the structure of the underlying interaction pattern. In this paper, we introduce a computationally efficient algorithm to determine quasioptimal solutions to the problem. The method leverages network sparsity to reduce computational complexity from exponential to almost quadratic, thus allowing the straightforward application of the method to mid-to-large-size systems. Although the method is exact only for equilibrium stochastic processes defined on trees, it turns out to be effective also for out-of-equilibrium processes on sparse loopy networks.

  11. The prospect of hazardous sludge reduction through gasification process

    Science.gov (United States)

    Hakiki, R.; Wikaningrum, T.; Kurniawan, T.

    2018-01-01

    Biological sludge generated from centralized industrial WWTP is classified as toxic and hazardous waste based on the Indonesian’s Government Regulation No. 101/2014. The amount of mass and volume of sludge produced have an impact in the cost to manage or to dispose. The main objective of this study is to identify the opportunity of gasification technology which can be applied to reduce hazardous sludge quantity before sending to the final disposal. This preliminary study covers the technical and economic assessment of the application of gasification process, which was a combination of lab-scale experimental results and assumptions based on prior research. The results showed that the process was quite effective in reducing the amount and volume of hazardous sludge which results in reducing the disposal costs without causing negative impact on the environment. The reduced mass are moisture and volatile carbon which are decomposed, while residues are fix carbon and other minerals which are not decomposed by thermal process. The economical simulation showed that the project will achieve payback period in 2.5 years, IRR value of 53 % and BC Ratio of 2.3. The further study in the pilot scale to obtain the more accurate design and calculations is recommended.

  12. Detection and reduction of tungsten contamination in ion implantation processes

    International Nuclear Information System (INIS)

    Polignano, M.L.; Galbiati, A.; Grasso, S.; Mica, I.; Barbarossa, F.; Magni, D.

    2016-01-01

    In this paper, we review the results of some studies addressing the problem of tungsten contamination in implantation processes. For some tests, the implanter was contaminated by implantation of wafers with an exposed tungsten layer, resulting in critical contamination conditions. First, DLTS (deep level transient spectroscopy) measurements were calibrated to measure tungsten contamination in ion-implanted samples. DLTS measurements of tungsten-implanted samples showed that the tungsten concentration increases linearly with the dose up to a rather low dose (5 x 10 10 cm -2 ). Tungsten deactivation was observed when the dose was further increased. Under these conditions, ToF-SIMS revealed tungsten at the wafer surface, showing that deactivation was due to surface segregation. DLTS calibration could therefore be obtained in the linear dose regime only. This calibration was used to evaluate the tungsten contamination in arsenic implantations. Ordinary operating conditions and critical contamination conditions of the equipment were compared. A moderate tungsten contamination was observed in samples implanted under ordinary operating conditions. This contamination was easily suppressed by a thin screen oxide. On the contrary, implantations in critical conditions of the equipment resulted in a relevant tungsten contamination, which could be reduced but not suppressed even by a relatively thick screen oxide (up to 150 Aa). A decontamination process consisting of high dose implantations of dummy wafers was tested for its efficiency to remove tungsten and titanium contamination. This process was found to be much more effective for titanium than for tungsten. Finally, DLTS proved to be much more sensitive that TXRF (total reflection X-ray fluorescence) in detecting tungsten contamination. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Detection and reduction of tungsten contamination in ion implantation processes

    Energy Technology Data Exchange (ETDEWEB)

    Polignano, M.L.; Galbiati, A.; Grasso, S.; Mica, I.; Barbarossa, F.; Magni, D. [STMicroelectronics, Agrate Brianza (Italy)

    2016-12-15

    In this paper, we review the results of some studies addressing the problem of tungsten contamination in implantation processes. For some tests, the implanter was contaminated by implantation of wafers with an exposed tungsten layer, resulting in critical contamination conditions. First, DLTS (deep level transient spectroscopy) measurements were calibrated to measure tungsten contamination in ion-implanted samples. DLTS measurements of tungsten-implanted samples showed that the tungsten concentration increases linearly with the dose up to a rather low dose (5 x 10{sup 10} cm{sup -2}). Tungsten deactivation was observed when the dose was further increased. Under these conditions, ToF-SIMS revealed tungsten at the wafer surface, showing that deactivation was due to surface segregation. DLTS calibration could therefore be obtained in the linear dose regime only. This calibration was used to evaluate the tungsten contamination in arsenic implantations. Ordinary operating conditions and critical contamination conditions of the equipment were compared. A moderate tungsten contamination was observed in samples implanted under ordinary operating conditions. This contamination was easily suppressed by a thin screen oxide. On the contrary, implantations in critical conditions of the equipment resulted in a relevant tungsten contamination, which could be reduced but not suppressed even by a relatively thick screen oxide (up to 150 Aa). A decontamination process consisting of high dose implantations of dummy wafers was tested for its efficiency to remove tungsten and titanium contamination. This process was found to be much more effective for titanium than for tungsten. Finally, DLTS proved to be much more sensitive that TXRF (total reflection X-ray fluorescence) in detecting tungsten contamination. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  14. Variance reduction techniques in the simulation of Markov processes

    International Nuclear Information System (INIS)

    Lessi, O.

    1987-01-01

    We study a functional r of the stationary distribution of a homogeneous Markov chain. It is often difficult or impossible to perform the analytical calculation of r and so it is reasonable to estimate r by a simulation process. A consistent estimator r(n) of r is obtained with respect to a chain with a countable state space. Suitably modifying the estimator r(n) of r one obtains a new consistent estimator which has a smaller variance than r(n). The same is obtained in the case of finite state space

  15. Process and apparatus for emissions reduction from waste incineration

    International Nuclear Information System (INIS)

    Khinkis, M.J.; Abbasi, H.A.; Lisauskas, R.A.; Itse, D.C.

    1991-01-01

    This paper describes a process for waste combustion. It comprises: introducing the waste into a drying zone within a combustion chamber; supplying air to the drying zone for preheating, drying, and partially combusting the waste; advancing the waste to a combustion zone within the combustion chamber; supplying air to the combustion zone for further advancing the waste to a burnout zone with the combustion chamber; supplying air to the burnout zone for final burnout of organics in the waste; and injecting fuel and recirculated glue gases into the combustion chamber above the waste to create a reducing secondary combustion zone

  16. The Moderating Effects of Cluster B Personality Traits on Violence Reduction Training: A Mixed-Model Analysis

    Science.gov (United States)

    Gerhart, James I.; Ronan, George F.; Russ, Eric; Seymour, Bailey

    2013-01-01

    Cognitive behavioral therapies have positive effects on anger and aggression; however, individuals differ in their response to treatment. The authors previously found that dynamic factors, such as increases in readiness to change, are associated with enhanced outcomes for violence reduction training. This study investigated how less dynamic…

  17. Behavioral training promotes multiple adaptive processes following acute hearing loss.

    Science.gov (United States)

    Keating, Peter; Rosenior-Patten, Onayomi; Dahmen, Johannes C; Bell, Olivia; King, Andrew J

    2016-03-23

    The brain possesses a remarkable capacity to compensate for changes in inputs resulting from a range of sensory impairments. Developmental studies of sound localization have shown that adaptation to asymmetric hearing loss can be achieved either by reinterpreting altered spatial cues or by relying more on those cues that remain intact. Adaptation to monaural deprivation in adulthood is also possible, but appears to lack such flexibility. Here we show, however, that appropriate behavioral training enables monaurally-deprived adult humans to exploit both of these adaptive processes. Moreover, cortical recordings in ferrets reared with asymmetric hearing loss suggest that these forms of plasticity have distinct neural substrates. An ability to adapt to asymmetric hearing loss using multiple adaptive processes is therefore shared by different species and may persist throughout the lifespan. This highlights the fundamental flexibility of neural systems, and may also point toward novel therapeutic strategies for treating sensory disorders.

  18. The training process: Planning for strength–power training in track and field. Part 1: Theoretical aspects

    Directory of Open Access Journals (Sweden)

    Brad H. DeWeese

    2015-12-01

    Full Text Available The process of strength–power training and the subsequent adaptation is a multi-factorial process. These factors range from the genetics and morphological characteristics of the athlete to how a coach selects, orders, and doses exercises and loading patterns. Consequently, adaptation from these training factors may largely relate to the mode of delivery, in other words, programming tactics. There is strong evidence that the manner and phases in which training is presented to the athlete can make a profound difference in performance outcome. This discussion deals primarily with block periodization concepts and associated methods of programming for strength–power training within track and field.

  19. Radon Reduction Experience at a Former Uranium Processing Facility

    International Nuclear Information System (INIS)

    Eger, K. J.; Rutherford, L.; Rickett, K.; Fellman, R.; Hungate, S.

    2004-01-01

    Approximately 6,200 cubic meters of waste containing about 2.0E8 MBq of radium-226 are stored in two large silos at the Fernald Site in southwest Ohio. The material is scheduled for retrieval, packaging, off site shipment and disposal by burial. Air in the silos above the stored material contained radon-222 at a concentration of 7.4 E5 Bq/L. Short-lived daughters formed by decay in these headspaces generated dose rates at contact with the top of the silos up to 1.05 mSv/hr and there complicate the process of retrieval. A Radon Control System (RCS) employing carbon adsorption beds has been designed under contract with the Fluor Fernald to remove most of the radon in the headspaces and maintain lower concentrations during periods when work on or above the domes is needed. Removing the radon also removes the short-lived daughters and reduces the dose rate near the domes to 20 to 30 μSv/hr. Failing to remove the radon would be costly, in the exposure of personnel needed to work extended periods at these moderate dose rates, or in dollars for the application of remote retrieval techniques. In addition, the RCS minimizes the potential for environmental releases. This paper describes the RCS, its mode of operation, and early experiences. The results of the test described herein and the experience gained from operation of the RCS during its first phase of continuous operation, will be used to determine the best air flow, and air flow distribution, the most desirable number and sequence number and sequence of adsorption beds to be used and the optimum application of air recycle within the RCS

  20. DEVELOPMENT OF COORDINATION ABILITIES OF FUTURE TEACHERS OF PHYSICAL TRAINING IN THE TRAINING PROCESS

    Directory of Open Access Journals (Sweden)

    Aleksandr Nikolaevich Shutov

    2015-02-01

    Full Text Available The article presents the results of implementing the methods of development coordination abilities in students of different sports specializations, students at the Faculty of Physical Education in the process of training in gymnastics. In the content of the classes includes a range of applied exercises with rotation in different planes of space, as a support, and the unsupported position, as well as their implementation in different directions of motion.The purpose - to improve the methods of development of coordination abilities of future teachers of physical culture in the process of training.Methodology development of coordination abilities based on the use of compound exercises with rotation in different planes of the space in the support and unsupported posture.Results. As a result of the development of methods of coordination abilities of the students showed a significant gain significant results when performing jumps with rotation (p <0.05. Significant increase was seen in the results of the students involved in wrestling, the results of which have reached the indicators close to the values typical for students specializing in gymnastics.The average value of the expert evaluation of the motor action from the arsenal of acrobatics and exercises on the equipment the students of the experimental group was 4.7 and 4.6 points, while the traditional method for dealing with this figure is 3.4 and 3.1 point, respectively (p < 0.05.Practical implications. Technique can be used as part of training students of physical culture of pedagogical universities.

  1. In Situ Spectroscopic Analysis of the Carbothermal Reduction Process of Iron Oxides during Microwave Irradiation

    Directory of Open Access Journals (Sweden)

    Jun Fukushima

    2018-01-01

    Full Text Available The effects of microwave plasma induction and reduction on the promotion of the carbothermal reduction of iron oxides (α-Fe2O3, γ-Fe2O3, and Fe3O4 are investigated using in situ emission spectroscopy measurements during 2.45 GHz microwave processing, and the plasma discharge (such as CN and N2 is measured during microwave E-field irradiation. It is shown that CN gas or excited CN molecules contribute to the iron oxide reduction reactions, as well as to the thermal reduction. On the other hand, no plasma is generated during microwave H-field irradiation, resulting in thermal reduction. Magnetite strongly interacts with the microwave H-field, and the reduction reaction is clearly promoted by microwave H-field irradiation, as well as thermal reduction reaction.

  2. Simultaneous nitrate reduction and acetaminophen oxidation using the continuous-flow chemical-less VUV process as an integrated advanced oxidation and reduction process

    Energy Technology Data Exchange (ETDEWEB)

    Moussavi, Gholamreza, E-mail: moussavi@modares.ac.ir; Shekoohiyan, Sakine

    2016-11-15

    Highlights: • Simultaneous advanced oxidation and reduction processes were explored in VUV system. • Complete reduction of nitrate to N{sub 2} was achieved at the presence of acetaminophen. • Complete degradation of acetaminophen was achieved at the presence of nitrate. • Over 95% of acetaminophen was mineralized in the VUV photoreactor. • VUV is a chemical-less advanced process for treating water emerging contaminants. - Abstract: This work was aimed at investigating the performance of the continuous-flow VUV photoreactor as a novel chemical-less advanced process for simultaneously oxidizing acetaminophen (ACT) as a model of pharmaceuticals and reducing nitrate in a single reactor. Solution pH was an important parameter affecting the performance of VUV; the highest ACT oxidation and nitrate reduction attained at solution pH between 6 and 8. The ACT was oxidized mainly by HO· while the aqueous electrons were the main working agents in the reduction of nitrate. The performance of VUV photoreactor improved with the increase of hydraulic retention time (HRT); the complete degradation of ACT and ∼99% reduction of nitrate with 100% N{sub 2} selectivity achieved at HRT of 80 min. The VUV effluent concentrations of nitrite and ammonium at HRT of 80 min were below the drinking water standards. The real water sample contaminated with the ACT and nitrate was efficiently treated in the VUV photoreactor. Therefore, the VUV photoreactor is a chemical-less advanced process in which both advanced oxidation and advanced reduction reactions are accomplished. This unique feature possesses VUV photoreactor as a promising method of treating water contaminated with both pharmaceutical and nitrate.

  3. Simultaneous nitrate reduction and acetaminophen oxidation using the continuous-flow chemical-less VUV process as an integrated advanced oxidation and reduction process

    International Nuclear Information System (INIS)

    Moussavi, Gholamreza; Shekoohiyan, Sakine

    2016-01-01

    Highlights: • Simultaneous advanced oxidation and reduction processes were explored in VUV system. • Complete reduction of nitrate to N_2 was achieved at the presence of acetaminophen. • Complete degradation of acetaminophen was achieved at the presence of nitrate. • Over 95% of acetaminophen was mineralized in the VUV photoreactor. • VUV is a chemical-less advanced process for treating water emerging contaminants. - Abstract: This work was aimed at investigating the performance of the continuous-flow VUV photoreactor as a novel chemical-less advanced process for simultaneously oxidizing acetaminophen (ACT) as a model of pharmaceuticals and reducing nitrate in a single reactor. Solution pH was an important parameter affecting the performance of VUV; the highest ACT oxidation and nitrate reduction attained at solution pH between 6 and 8. The ACT was oxidized mainly by HO· while the aqueous electrons were the main working agents in the reduction of nitrate. The performance of VUV photoreactor improved with the increase of hydraulic retention time (HRT); the complete degradation of ACT and ∼99% reduction of nitrate with 100% N_2 selectivity achieved at HRT of 80 min. The VUV effluent concentrations of nitrite and ammonium at HRT of 80 min were below the drinking water standards. The real water sample contaminated with the ACT and nitrate was efficiently treated in the VUV photoreactor. Therefore, the VUV photoreactor is a chemical-less advanced process in which both advanced oxidation and advanced reduction reactions are accomplished. This unique feature possesses VUV photoreactor as a promising method of treating water contaminated with both pharmaceutical and nitrate.

  4. Mine detection using SF-GPR: A signal processing approach for resolution enhancement and clutter reduction

    DEFF Research Database (Denmark)

    Karlsen, Brian; Jakobsen, Kaj Bjarne; Larsen, Jan

    2001-01-01

    Proper clutter reduction is essential for Ground Penetrating Radar data since low signal-to-clutter ratio prevent correct detection of mine objects. A signal processing approach for resolution enhancement and clutter reduction used on Stepped-Frequency Ground Penetrating Radar (SF-GPR) data is pr....... The clutter reduction method is based on basis function decomposition of the SF-GPR time-series from which the clutter and the signal are separated....

  5. Electrochemical processing of spent nuclear fuels: An overview of oxide reduction in pyroprocessing technology

    Directory of Open Access Journals (Sweden)

    Eun-Young Choi

    2015-12-01

    Full Text Available The electrochemical reduction process has been used to reduce spent oxide fuel to a metallic form using pyroprocessing technology for a closed fuel cycle in combination with a metal-fuel fast reactor. In the electrochemical reduction process, oxides fuels are loaded at the cathode basket in molten Li2O–LiCl salt and electrochemically reduced to the metal form. Various approaches based on thermodynamic calculations and experimental studies have been used to understand the electrode reaction and efficiently treat spent fuels. The factors that affect the speed of the electrochemical reduction have been determined to optimize the process and scale-up the electrolysis cell. In addition, demonstrations of the integrated series of processes (electrorefining and salt distillation with the electrochemical reduction have been conducted to realize the oxide fuel cycle. This overview provides insight into the current status of and issues related to the electrochemical processing of spent nuclear fuels.

  6. Controlling the Instructional Development Process. Training Development and Research Center Project Number Fifteen.

    Science.gov (United States)

    Sleezer, Catherine M.; Swanson, Richard A.

    Process control is a way of training managers in business and industry to plan, monitor, and communicate the instructional development process of training projects. Two simple and useful tools that managers use in controlling the process of instructional development are the Process Control Planning Sheet and the Process Control Record. The Process…

  7. A 3D visualization approach for process training in office environments

    NARCIS (Netherlands)

    Aysolmaz, Banu; Brown, Ross; Bruza, Peter; Reijers, Hajo A.

    2016-01-01

    Process participants need to learn how to perform in the context of their business processes. Process training is challenging due to cognitive difficulties in relating process model elements to real world concepts. In this paper we present a 3D VirtualWorld (VW) process training approach for office

  8. Deployment of an in-house designed training process in a quaternary care hospital.

    Science.gov (United States)

    Kumar, Ajit; Bhatia, Saurabh; Chiang, I-Jen

    2013-01-01

    Healthcare providers, such as doctors and nurses, have been famous for high resistance to change. A careful change management plan, particularly training process, is utmost necessary. A quaternary care hospital in India changed its system, from manual to Electronic Medical Record/Health Information System (EMR/HIS). The hospital management wanted to train its 4000 diverse end-users on the EMR/HIS in two months' time. This paper describes an in-house designed training process and its deployment in the given healthcare organizational settings. We designed a training process named DRIPDA. The training process was deployed to train 4000 end-users of EMR/HIS, in the quaternary care hospital. Various factors, such as methods and tools of training, constraints of trainees, trainers, and organization were considered while deploying the training process. The effectiveness of the DRIPDA was assessed using the Kirkpatrick model. End-users received training on the new system only in 25% of estimated time and 28% of the projected expense, without having any distraction in their usual workflow, or any productivity loss. We found that the DRIPDA training process could train all employees effectively and efficiently. A decent training process can help in managing the change, thereby reduce the training time and cost.

  9. Dual N-Back Working Memory Training in Healthy Adults: A Randomized Comparison to Processing Speed Training

    Science.gov (United States)

    Lawlor-Savage, Linette; Goghari, Vina M.

    2016-01-01

    Enhancing cognitive ability is an attractive concept, particularly for middle-aged adults interested in maintaining cognitive functioning and preventing age-related declines. Computerized working memory training has been investigated as a safe method of cognitive enhancement in younger and older adults, although few studies have considered the potential impact of working memory training on middle-aged adults. This study investigated dual n-back working memory training in healthy adults aged 30–60. Fifty-seven adults completed measures of working memory, processing speed, and fluid intelligence before and after a 5-week web-based dual n-back or active control (processing speed) training program. Results: Repeated measures multivariate analysis of variance failed to identify improvements across the three cognitive composites, working memory, processing speed, and fluid intelligence, after training. Follow-up Bayesian analyses supported null findings for training effects for each individual composite. Findings suggest that dual n-back working memory training may not benefit working memory or fluid intelligence in healthy adults. Further investigation is necessary to clarify if other forms of working memory training may be beneficial, and what factors impact training-related benefits, should they occur, in this population. PMID:27043141

  10. Dual N-Back Working Memory Training in Healthy Adults: A Randomized Comparison to Processing Speed Training.

    Directory of Open Access Journals (Sweden)

    Linette Lawlor-Savage

    Full Text Available Enhancing cognitive ability is an attractive concept, particularly for middle-aged adults interested in maintaining cognitive functioning and preventing age-related declines. Computerized working memory training has been investigated as a safe method of cognitive enhancement in younger and older adults, although few studies have considered the potential impact of working memory training on middle-aged adults. This study investigated dual n-back working memory training in healthy adults aged 30-60. Fifty-seven adults completed measures of working memory, processing speed, and fluid intelligence before and after a 5-week web-based dual n-back or active control (processing speed training program.Repeated measures multivariate analysis of variance failed to identify improvements across the three cognitive composites, working memory, processing speed, and fluid intelligence, after training. Follow-up Bayesian analyses supported null findings for training effects for each individual composite. Findings suggest that dual n-back working memory training may not benefit working memory or fluid intelligence in healthy adults. Further investigation is necessary to clarify if other forms of working memory training may be beneficial, and what factors impact training-related benefits, should they occur, in this population.

  11. Impact of reduction in working hours for doctors in training on postgraduate medical education and patients' outcomes: systematic review.

    Science.gov (United States)

    Moonesinghe, S R; Lowery, J; Shahi, N; Millen, A; Beard, J D

    2011-03-22

    To determine whether a reduction in working hours of doctors in postgraduate medical training has had an effect on objective measures of medical education and clinical outcome. Systematic review. Medline, Embase, ISI Web of Science, Google Scholar, ERIC, and SIGLE were searched without language restriction for articles published between 1990 and December 2010. Reference lists and citations of selected articles. Studies that assessed the impact of a change in duty hours using any objective measure of outcome related to postgraduate medical training, patient safety, or clinical outcome. Any study design was eligible for inclusion. 72 studies were eligible for inclusion: 38 reporting training outcomes, 31 reporting outcomes in patients, and three reporting both. A reduction in working hours from greater than 80 hours a week (in accordance with US recommendations) does not seem to have adversely affected patient safety and has had limited effect on postgraduate training. Reports on the impact of European legislation limiting working hours to less than 56 or 48 a week are of poor quality and have conflicting results, meaning that firm conclusions cannot be made. Reducing working hours to less than 80 a week has not adversely affected outcomes in patient or postgraduate training in the US. The impact of reducing hours to less than 56 or 48 a week in the UK has not yet been sufficiently evaluated in high quality studies. Further work is required, particularly in the European Union, using large multicentre evaluations of the impact of duty hours' legislation on objective educational and clinical outcomes.

  12. GREENER CHEMICAL PROCESS DESIGN ALTERNATIVES ARE REVEALED USING THE WASTE REDUCTION DECISION SUPPORT SYSTEM (WAR DSS)

    Science.gov (United States)

    The Waste Reduction Decision Support System (WAR DSS) is a Java-based software product providing comprehensive modeling of potential adverse environmental impacts (PEI) predicted to result from newly designed or redesigned chemical manufacturing processes. The purpose of this so...

  13. Oxidation-reduction processes in ground water at Naval Weapons Industrial Reserve Plant, Dallas, Texas

    Science.gov (United States)

    Jones, S.A.; Braun, Christopher L.; Lee, Roger W.

    2003-01-01

    Concentrations of trichloroethene in ground water at the Naval Weapons Industrial Reserve Plant in Dallas, Texas, indicate three source areas of chlorinated solvents?building 1, building 6, and an off-site source west of the facility. The presence of daughter products of reductive dechlorination of trichloroethene, which were not used at the facility, south and southwest of the source areas are evidence that reductive dechlorination is occurring. In places south of the source areas, dissolved oxygen concentrations indicated that reduction of oxygen could be the dominant process, particularly south of building 6; but elevated dissolved oxygen concentrations south of building 6 might be caused by a leaking water or sewer pipe. The nitrite data indicate that denitrification is occurring in places; however, dissolved hydrogen concentrations indicate that iron reduction is the dominant process south of building 6. The distributions of ferrous iron indicate that iron reduction is occurring in places south-southwest of buildings 6 and 1; dissolved hydrogen concentrations generally support the interpretation that iron reduction is the dominant process in those places. The generally low concentrations of sulfide indicate that sulfate reduction is not a key process in most sampled areas, an interpretation that is supported by dissolved hydrogen concentrations. Ferrous iron and dissolved hydrogen concentrations indicate that ferric iron reduction is the primary oxidation-reduction process. Application of mean first-order decay rates in iron-reducing conditions for trichloroethene, dichloroethene, and vinyl chloride yielded half-lives for those solvents of 231, 347, and 2.67 days, respectively. Decay rates, and thus half-lives, at the facility are expected to be similar to those computed. A weighted scoring method to indicate sites where reductive dechlorination might be likely to occur indicated strong evidence for anaerobic biodegradation of chlorinated solvents at six sites

  14. Training and Organizational Effectiveness: Moderating Role of Knowledge Management Process

    Science.gov (United States)

    Rahman, Azmawani Abd; Ng, Siew Imm; Sambasivan, Murali; Wong, Florence

    2013-01-01

    Purpose: Training alone is not sufficient to enhance organizational effectiveness to a greater level because not all knowledge obtained from the training is properly transferred and applied to the organization. This study aims to investigate whether efforts invested by Malaysian manufacturers in employee training and knowledge transfer affect…

  15. 78 FR 60885 - Proposed Collection; 60-Day Notice Request: Application Process for Clinical Research Training...

    Science.gov (United States)

    2013-10-02

    ... Notice Request: Application Process for Clinical Research Training and Medical Education at the Clinical... Research Training and Medical Education, NIH Clinical Center, 10 Center Drive, MSC 1158, Bethesda, MD 20892... Process for Clinical Research Training and Medical Education at the Clinical Center and its Impact on...

  16. Application of nonliner reduction techniques in chemical process modeling: a review

    International Nuclear Information System (INIS)

    Muhaimin, Z; Aziz, N.; Abd Shukor, S.R.

    2006-01-01

    Model reduction techniques have been used widely in engineering fields for electrical, mechanical as well as chemical engineering. The basic idea of reduction technique is to replace the original system by an approximating system with much smaller state-space dimension. A reduced order model is more beneficial to process and industrial field in terms of control purposes. This paper is to provide a review on application of nonlinear reduction techniques in chemical processes. The advantages and disadvantages of each technique reviewed are also highlighted

  17. A training approach for the transition of repeatable collaboration processes to practitioners

    NARCIS (Netherlands)

    Kolfschoten, G.L.; De Vreede, G.J.; Pietron, L.R.

    2011-01-01

    This paper presents a training approach to support the deployment of collaboration process support according to the Collaboration Engineering approach. In Collaboration Engineering, practitioners in an organization are trained to facilitate a specific collaborative work practice on a recurring

  18. The Military Decision-Making Process (MDMP): A Prototype Training Product

    National Research Council Canada - National Science Library

    Wampler, Richard

    1998-01-01

    ...): A Prototype Training Product. The MDMP product is a computer-based, stand alone training support package to assist individuals and staffs of light infantry brigades in learning to participate in the military decision-making process...

  19. Reduction in training time of a deep learning model in detection of lesions in CT

    Science.gov (United States)

    Makkinejad, Nazanin; Tajbakhsh, Nima; Zarshenas, Amin; Khokhar, Ashfaq; Suzuki, Kenji

    2018-02-01

    Deep learning (DL) emerged as a powerful tool for object detection and classification in medical images. Building a well-performing DL model, however, requires a huge number of images for training, and it takes days to train a DL model even on a cutting edge high-performance computing platform. This study is aimed at developing a method for selecting a "small" number of representative samples from a large collection of training samples to train a DL model for the could be used to detect polyps in CT colonography (CTC), without compromising the classification performance. Our proposed method for representative sample selection (RSS) consists of a K-means clustering algorithm. For the performance evaluation, we applied the proposed method to select samples for the training of a massive training artificial neural network based DL model, to be used for the classification of polyps and non-polyps in CTC. Our results show that the proposed method reduce the training time by a factor of 15, while maintaining the classification performance equivalent to the model trained using the full training set. We compare the performance using area under the receiveroperating- characteristic curve (AUC).

  20. Simultaneous nitrate reduction and acetaminophen oxidation using the continuous-flow chemical-less VUV process as an integrated advanced oxidation and reduction process.

    Science.gov (United States)

    Moussavi, Gholamreza; Shekoohiyan, Sakine

    2016-11-15

    This work was aimed at investigating the performance of the continuous-flow VUV photoreactor as a novel chemical-less advanced process for simultaneously oxidizing acetaminophen (ACT) as a model of pharmaceuticals and reducing nitrate in a single reactor. Solution pH was an important parameter affecting the performance of VUV; the highest ACT oxidation and nitrate reduction attained at solution pH between 6 and 8. The ACT was oxidized mainly by HO while the aqueous electrons were the main working agents in the reduction of nitrate. The performance of VUV photoreactor improved with the increase of hydraulic retention time (HRT); the complete degradation of ACT and ∼99% reduction of nitrate with 100% N2 selectivity achieved at HRT of 80min. The VUV effluent concentrations of nitrite and ammonium at HRT of 80min were below the drinking water standards. The real water sample contaminated with the ACT and nitrate was efficiently treated in the VUV photoreactor. Therefore, the VUV photoreactor is a chemical-less advanced process in which both advanced oxidation and advanced reduction reactions are accomplished. This unique feature possesses VUV photoreactor as a promising method of treating water contaminated with both pharmaceutical and nitrate. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Comparable Effects of High-Intensity Interval Training and Prolonged Continuous Exercise Training on Abdominal Visceral Fat Reduction in Obese Young Women

    Directory of Open Access Journals (Sweden)

    Haifeng Zhang

    2017-01-01

    Full Text Available This study compared the effect of prolonged moderate-intensity continuous training (MICT on reducing abdominal visceral fat in obese young women with that of work-equivalent (300 kJ/training session high-intensity interval training (HIIT. Forty-three participants received either HIIT (n=15, MICT (n=15, or no training (CON, n=13 for 12 weeks. The abdominal visceral fat area (AVFA and abdominal subcutaneous fat area (ASFA of the participants were measured through computed tomography scans preintervention and postintervention. Total fat mass and the fat mass of the android, gynoid, and trunk regions were assessed through dual-energy X-ray absorptiometry. Following HIIT and MICT, comparable reductions in AVFA (−9.1, −9.2 cm2, ASFA (−35, −28.3 cm2, and combined AVFA and ASFA (−44.7, −37.5 cm2, p>0.05 were observed. Similarly, reductions in fat percentage (−2.5%, −2.4%, total fat mass (−2.8, −2.8 kg, and fat mass of the android (−0.3, −0.3 kg, gynoid (−0.5, −0.7 kg, and trunk (−1.6, −1.2 kg, p>0.05 regions did not differ between HIIT and MICT. No variable changed in CON. In conclusion, MICT consisting of prolonged sessions has no quantitative advantage, compared with that resulting from HIIT, in abdominal visceral fat reduction. HIIT appears to be the predominant strategy for controlling obesity because of its time efficiency.

  2. The study of reductive reextraction of plutonium in the Purex process

    International Nuclear Information System (INIS)

    Poczynajlo, A.

    1985-01-01

    The methods of separation of U and Pu in the Purex process and the thermodynamic and kinetic properties of Pu(4) reductants are discussed. The kinetic equation of the process of reductive reextraction of plutonium for the first order reaction with respect to Pu(4) is derived. The kinetics of plutonium reextraction with the use of uranium (4), ascorbic acid and other reductants has been studied. The necessity of application of the stoichiometric excess of reductant has been explained by simultaneously occured reoxidation process of plutonium. The method of calculation of the steady- state plutonium concentration profiles has been elaborated for counter-current separation of U and Pu in multistage contactor. 90 refs., 20 tabs., 29 figs. (author)

  3. Carbon emission reduction targeting through process integration and fuel switching with mathematical modeling

    International Nuclear Information System (INIS)

    Tiew, B.J.; Shuhaimi, M.; Hashim, H.

    2012-01-01

    Highlights: ► CO 2 emissions reduction targeting for existing plant were categorized into three groups. ► Model for CO 2 emissions reduction targeting via combination approach was developed. ► Effect of combination approach onto HEN area efficiency was discussed. ► Proposed execution strategy can avoid HEN area efficiency deterioration. -- Abstract: Carbon emission reduction targeting is an important and effective effort for industry to contribute in controlling greenhouse gases concentration in atmosphere. Graphical approach has been proposed for CO 2 emissions reduction targeting via HEN retrofit and fuel switching. However, it involves potentially time consuming manual procedures and the quality of solutions produced greatly depends on designer’s experience and judgment. Besides, graphical approach hardly account for the cost factor during the design phase, thus potentially generate complex design. This paper introduces an MINLP model for simultaneous CO 2 emissions reduction targeting via fuel switching and HEN retrofit. A sequential model execution was proposed along with the proposed model. The application of the model on a crude preheat train case study has demonstrated its workability to generate optimal solution for targeted CO 2 emissions reduction at minimum payback period.

  4. Employee Post-Training Behaviour and Performance: Evaluating the Results of the Training Process

    Science.gov (United States)

    Diamantidis, Anastasios D.; Chatzoglou, Prodromos D.

    2014-01-01

    Despite the fact that firms invest in training, there is considerable evidence to show that training programmes often fail to achieve the intended result of improving worker and organization performance. The purpose of this paper is to examine the medium- to long-term effects of training programmes on firms by means of an integrated research model…

  5. Recovery of Work-Related Stress: Complaint Reduction and Work-Resumption are Relatively Independent Processes.

    Science.gov (United States)

    de Vente, Wieke; Kamphuis, Jan Henk; Blonk, Roland W B; Emmelkamp, Paul M G

    2015-09-01

    The process of recovery from work-related stress, consisting of complaint reduction and work-resumption, is not yet fully understood. The aim of this study was to investigate predictors of complaint reduction and work-resumption, as well as testing complaint reduction as a mediator in the association between predictors and work-resumption. Seventy-one patients on sickness-leave because of work-related stress complaints were followed over a period of 13 months. Predictors comprised personal (demographics, coping, cognitions), work-related (job-characteristics, social support), and illness-related (complaint duration, absence duration) variables. Dependent variables were distress complaints, burnout complaints, and work-resumption. Complaints reduced considerably over time to borderline clinical levels and work-resumption increased to 68% at 13 months. Predictors of stronger reduction of distress complaints were male gender, less working hours, less decision authority, more co-worker support, and shorter absence duration. Predictors of stronger reduction of burnout complaints were male gender, lower age, high education, less avoidant coping, less decision authority, more job security, and more co-worker support. Predictors of work-resumption were lower age and stronger reduction of burnout complaints. No indication for a mediating role of burnout complaints between the predictor age and work-resumption was found. Complaint reduction and work-resumption are relatively independent processes. Symptom reduction is influenced by individual and work-related characteristics, which holds promise for a multidisciplinary treatment approach for work-related stress.

  6. A Locus of Control-based HIV and AIDS Risk Reduction Training ...

    African Journals Online (AJOL)

    The aim of this study was to investigate the effi cacy of a locus of control-based training programme in reducing HIV and AIDS risk among university students. The locus of control-based variables that formed the training programme were social systems control, deferment of gratifi cation, personal values and expectancies, ...

  7. Single step preparation of NdFeB alloy by magnesiothermic reduction-diffusion process

    International Nuclear Information System (INIS)

    Singha, Vinay Kant; Surendranathana, A.O.; John Berchmans, L.

    2014-01-01

    Magnesiothermic reduction is a new approach to produce the NdFeB alloy on a commercial scale. Similar studies were conducted for the preparation of LaNi 5 and SmCo 5 using magnesium as the reductant. In the present investigation NdFeB Hard magnetic bulk materials were synthesized by metallothermic 'Reduction – Diffusion (R-D) Process' using Magnesium as a reductant. For this process oxide precursors of Nd, Fe and B were blended with flux (LiCl/CaCl 2 ) and Mg chips were sandwiched in alternate layers. Thermal analysis (TGA/DTA) was carried out to find the dissociation and decomposition temperature of the reactants. The phase analysis, structure, and elemental composition were assessed by X-ray diffraction (XRD) and electron dispersive spectrometry (EDS). The infrared (IR) spectra were recorded by Fourier transform infrared spectrometer (FTIR). The morphological features and particle size was assessed by scanning electron microscope (SEM). The magnetic behaviour of the alloy was assessed using electron paramagnetic resonance (EPR) and vibratory sample magnetometer (VSM). From these studies it has been concluded that the NdFeB magnetic particles can be prepared using magnesium as the reductant. The process is faster and consumes very less amount of energy for the completion as compared to conventional calciothermic reduction process. Traces of MgO were detected in the alloy which increases the perpendicular anisotropy, thus increasing the coercivity of the material

  8. An education and training programme for radiological institutes: impact on the reduction of the CT radiation dose

    International Nuclear Information System (INIS)

    Schindera, Sebastian T.; Allmen, Gabriel von; Vock, Peter; Szucs-Farkas, Zsolt; Treier, Reto; Trueb, Philipp R.; Nauer, Claude

    2011-01-01

    To establish an education and training programme for the reduction of CT radiation doses and to assess this programme's efficacy. Ten radiological institutes were counselled. The optimisation programme included a small group workshop and a lecture on radiation dose reduction strategies. The radiation dose used for five CT protocols (paranasal sinuses, brain, chest, pulmonary angiography and abdomen) was assessed using the dose-length product (DLP) before and after the optimisation programme. The mean DLP values were compared with national diagnostic reference levels (DRLs). The average reduction of the DLP after optimisation was 37% for the sinuses (180 vs. 113 mGycm, P < 0.001), 9% for the brain (982 vs. 896 mGycm, P < 0.05), 24% for the chest (425 vs. 322 mGycm, P < 0.05) and 42% for the pulmonary arteries (352 vs. 203 mGycm, P < 0.001). No significant change in DLP was found for abdominal CT. The post-optimisation DLP values of the sinuses, brain, chest, pulmonary arteries and abdomen were 68%, 10%, 20%, 55% and 15% below the DRL, respectively. The education and training programme for radiological institutes is effective in achieving a substantial reduction in CT radiation dose. (orig.)

  9. Optimization Solutions for Improving the Performance of the Parallel Reduction Algorithm Using Graphics Processing Units

    Directory of Open Access Journals (Sweden)

    Ion LUNGU

    2012-01-01

    Full Text Available In this paper, we research, analyze and develop optimization solutions for the parallel reduction function using graphics processing units (GPUs that implement the Compute Unified Device Architecture (CUDA, a modern and novel approach for improving the software performance of data processing applications and algorithms. Many of these applications and algorithms make use of the reduction function in their computational steps. After having designed the function and its algorithmic steps in CUDA, we have progressively developed and implemented optimization solutions for the reduction function. In order to confirm, test and evaluate the solutions' efficiency, we have developed a custom tailored benchmark suite. We have analyzed the obtained experimental results regarding: the comparison of the execution time and bandwidth when using graphic processing units covering the main CUDA architectures (Tesla GT200, Fermi GF100, Kepler GK104 and a central processing unit; the data type influence; the binary operator's influence.

  10. Experimental Study of the Melting and Reduction Behaviour of Ore Used in the HIsarna Process

    NARCIS (Netherlands)

    Qu, Y.

    2013-01-01

    The HIsarna is a coal-based smelting reduction process for ironmaking to drastically reduce CO2 emission and is one of the most promising alternative ironmaking processes under development in the world. The furnace consists of two inter-connected reactors: i) a smelting cyclone, ii) a smelting

  11. Adaptation of U(IV) reductant to Savannah River Plant Purex processes

    International Nuclear Information System (INIS)

    Orebaugh, E.G.

    1986-04-01

    Partitioning of uranium and plutonium in the Purex process requires the reduction of the extracted Pu(IV) to the less extractable Pu(III). This valence adjustment at SRP has historically been performed by the addition of ferrous ion, which eventually constitutes a major component of high-level waste solids requiring costly permanent disposal. Uranous nitrate, U(IV), is a kinetically fast reductant which may be substituted for Fe(II) without contributing to waste solids. This report documents U(IV) flowsheet development in the miniature mixer-settler equipment at SRL and provides an insight into the mechanisms responsible for the successful direct substitution of U(IV) for Fe(II) in 1B bank extractant. U(IV) will be the reductant of choice when its fast reduction kinetics are required in centrifugal-contactor-based processing. The flowsheets investigated here should transfer to such equipment with minimal modifications

  12. Training Mentors as Educational Advisors for Adult Learners. Process Manual.

    Science.gov (United States)

    Singer, Elizabeth W.

    Materials used by the director of a project designed to assist key personnel in businesses, industries, and agencies with the educational counseling of their employees are presented. The objectives of the project, "Training Mentors as Educational Advisors of Adult Learners," were to: (1) provide two training sessions in educational…

  13. Phase-processing as a tool for speckle reduction in pulse-echo images

    DEFF Research Database (Denmark)

    Healey, AJ; Leeman, S; Forsberg, F

    1991-01-01

    . Traditional speckle reduction procedures regard speckle correction as a stochastic process and trade image smoothing (resolution loss) for speckle reduction. Recently, a new phase acknowledging technique has been proposed that is unique in its ability to correct for speckle interference with no image......Due to the coherent nature of conventional ultrasound medical imaging systems interference artefacts occur in pulse echo images. These artefacts are generically termed 'speckle'. The phenomenon may severely limit low contrast resolution with clinically relevant information being obscured...

  14. Rare earth intermetallic compounds produced by a reduction-diffusion process

    International Nuclear Information System (INIS)

    Cech, R.E.

    1975-01-01

    A reduction-diffusion process is given for producing novel rare earth intermetallic compounds, such as cobalt--rare earth intermetallic compounds, especially compounds useful in preparing permanent magnets. A particulate mixture of rare earth metal halide, cobalt and calcium hydride is heated to effect reduction of the rare earth metal halide and to diffuse the resulting rare earth metal into the cobalt to form the intermetallic compound

  15. Injury Reduction Effectiveness of Prescribing Running Shoes Based on Foot Shape in Basic Combat Training

    National Research Council Canada - National Science Library

    Baski, A. A; Whitman, L. J; Knapik, Joseph J; Swedler, David; Grier, Tyson; Hauret, Keith G; Bullock, Steven H; Williams, Kelly; Darakjy, Salima; Lester, Mark; Tobler, Steve; Clemmons, Nakia; Jones, Bruce H

    2008-01-01

    ... (reflecting longitudinal arch height). In response to a request from the Military Training Task Force of the Defense Safety Oversight Council, this study examined whether or not this prescription technique influenced injury risk...

  16. Injury Reduction Effectiveness of Prescribing Running Shoes Based on Foot Shape in Basic Combat Training

    National Research Council Canada - National Science Library

    Knapik, Joseph J; Swedler, David; Grier, Tyson; Hauret, Keith G; Bullock, Steven H; Williams, Kelly; Darakjy, Salima; Lester, Mark; Tobler, Steve; Clemmons, Nakia

    2008-01-01

    ... (reflecting longitudinal arch height). In response to a request from the Military Training Task Force of the Defense Safety Oversight Council this study examined whether or not this prescription technique influenced injury risk...

  17. Resistance Exercise Training-Induced Muscle Hypertrophy Was Associated with Reduction of Inflammatory Markers in Elderly Women

    Directory of Open Access Journals (Sweden)

    Kishiko Ogawa

    2010-01-01

    Full Text Available Aging is associated with low-grade inflammation. The benefits of regular exercise for the elderly are well established, whereas less is known about the impact of low-intensity resistance exercise on low-grade inflammation in the elderly. Twenty-one elderly women (mean age ± SD, 85.0 ± 4.5 years participated in 12 weeks of resistance exercise training. Muscle thickness and circulating levels of C-reactive protein (CRP, serum amyloid A (SAA, heat shock protein (HSP70, tumor necrosis factor (TNF-α, interleukin (IL-1, IL-6, monocyte chemotactic protein (MCP-1, insulin, insulin-like growth factor (IGF-I, and vascular endothelial growth factor (VEGF were measured before and after the exercise training. Training reduced the circulating levels of CRP, SAA (P<.05, HSP70, IGF-I, and insulin (P<.01. The training-induced reductions in CRP and TNF-α were significantly (P<.01, P<.05 associated with increased muscle thickness (r=−0.61, r=−0.54, respectively. None of the results were significant after applying a Bonferroni correction. Resistance training may assist in maintaining or improving muscle volume and reducing low-grade inflammation.

  18. The effect of training on noise reduction in neonatal intensive care units.

    Science.gov (United States)

    Calikusu Incekar, Mujde; Balci, Serap

    2017-07-01

    Noise, an environmental stimulus, is especially important in the neurobehavioral development of newborns and brain development of infants at high risk. Conditions in the neonatal intensive care units (NICUs) may cause certain sensory stimuli that are not appropriate for the development of newborns, especially preterm infants. This study was conducted in order to determine noise levels in the NICU and to evaluate the effect of training provided for noise control. This study was conducted as a pretest-posttest quasiexperimental design between September and November 2014 in a 30-bed NICU of a tertiary hospital in Istanbul. A sample group consisting of 30 people (26 nurses, 4 care workers). Noise measurement devices were used in the Training Program of Noise Control. Of the health professionals, 96.7% were women, 86.7% were nurses, and 63.3% were university graduates. Some 36.7% of the health professionals had worked within the unit for more than 5 years. Noise measurements of full implementations were made over three 24-h periods. Noise measurements were taken before and after the training on Monday, Friday, and Sunday. Noise levels after training diminished in all three measurements, and the decrease was found statistically significant (P Noise Control Training for health professionals who work in NICUs is an effective way of reducing noise. We recommend that this training should be given to NICU health professionals and noise levels should be determined through measurements at specific times. © 2017 Wiley Periodicals, Inc.

  19. Preliminary reduction of chromium ore using Si sludge generated in silicon wafer manufacturing process

    Directory of Open Access Journals (Sweden)

    Jung W.-G.

    2018-01-01

    Full Text Available In order to promote the recycling of by-product from Si wafer manufacturing process and to develop environment-friend and low cost process for ferrochrome alloy production, a basic study was performed on the preliminary reduction reaction between chromium ore and the Si sludge, comprised of SiC and Si particles, which is recovered from the Si wafer manufacturing process for the semiconductor and solar cell industries. Pellets were first made by mixing chromium ore, Si sludge, and some binders in the designed mixing ratios and were then treated at different temperatures in the 1116°C–1388°C range in an ambient atmosphere. Cordierite and SiO2 were confirmed to be formed in the products after the reduction. Additionally, metal particles were observed in the product with Fe, Cr, and Si components. It is found that temperatures above 1300°C are necessary for the reduction of the chromium ore by the Si sludge. The reduction ratio for Fe was evaluated quantitatively for our experimental conditions, and the proper mixing ratio was suggested for the pre-reduction of the chromium ore by the Si sludge. This study provides basic information for the production of ferrochrome alloys on the pre-reduction of chromium ore using Si sludge.

  20. Personality Traits and Training Initiation Process: Intention, Planning, and Action Initiation.

    Science.gov (United States)

    Laguna, Mariola; Purc, Ewelina

    2016-01-01

    The article aims at investigating the role of personality traits in relation to training initiation. Training initiation is conceptualized as a goal realization process, and explained using goal theories. There are three stages of the process analyzed: intention to undertake training, plan formulation, and actual training undertaking. Two studies tested the relationships between five personality traits, defined according to the five factor model, and the stages of the goal realization process. In Study 1, which explains training intention and training plans' formulation, 155 employees participated. In Study 2, which was time-lagged with two measurement points, and which explains intention, plans, and training actions undertaken, the data from 176 employees was collected at 3 month intervals. The results of these studies show that personality traits, mainly openness to experience, predict the training initiation process to some degree: intention, plans, and actual action initiation. The findings allow us to provide recommendations for practitioners responsible for human resource development. The assessment of openness to experience in employees helps predict their motivation to participate in training activities. To increase training motivation it is vital to strengthen intentions to undertake training, and to encourage training action planning.

  1. An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes

    Directory of Open Access Journals (Sweden)

    Emily J. Haas

    2014-09-01

    Conclusion: This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels—individual, interpersonal, organizational, and community—to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.

  2. Training in Using Earplugs or Using Earplugs with a Higher than Necessary Noise Reduction Rating? A Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    M Salmani Nodoushan

    2014-09-01

    Full Text Available Background: Noise-induced hearing loss (NIHL is one of the most common occupational diseases and the second most common cause of workers' claims for occupational injuries. Objective: Due to high prevalence of NIHL and several reports of improper use of hearing protective devices (HPDs, we conducted this study to compare the effect of face-to-face training in effective use of earplugs with appropriate NRR to overprotection of workers by using earplugs with higher than necessary noise reduction rating (NRR. Methods: In a randomized clinical trial, 150 workers referred to occupational medicine clinic were randomly allocated to three arms—a group wearing earplugs with an NRR of 25 with no training in appropriate use of the device; a group wearing earplugs with an NRR of 25 with training; another group wearing earplugs with an NRR of 30, with no training. Hearing threshold was measured in the study groups by real ear attenuation at threshold (REAT method. This trial is registered with Australian New Zealand clinical trials Registry, number ACTRN00363175. Results: The mean±SD age of the participants was 28±5 (range: 19–39 years. 42% of participants were female. The mean noise attenuation in the group with training was 13.88 dB, significantly higher than those observed in other groups. The highest attenuation was observed in high frequencies (4, 6, and 8 kHz in the group with training. Conclusion: Training in appropriate use of earplugs significantly affects the efficacy of earplugs—even more than using an earplug with higher NRR.

  3. Relationship of mindful awareness to neural processing of angry faces and impact of mindfulness training: A pilot investigation.

    Science.gov (United States)

    Lee, Athene K W; Gansler, David A; Zhang, Nanyin; Jerram, Matthew W; King, Jean A; Fulwiler, Carl

    2017-06-30

    Mindfulness is paying attention, non-judgmentally, to experience in the moment. Mindfulness training reduces depression and anxiety and influences neural processes in midline self-referential and lateralized somatosensory and executive networks. Although mindfulness benefits emotion regulation, less is known about its relationship to anger and the corresponding neural correlates. This study examined the relationship of mindful awareness and brain hemodynamics of angry face processing, and the impact of mindfulness training. Eighteen healthy volunteers completed an angry face processing fMRI paradigm and measurement of mindfulness and anger traits. Ten of these participants were recruited from a Mindfulness-Based Stress Reduction (MBSR) class and also completed imaging and other assessments post-training. Self-reported mindful awareness increased after MBSR, but trait anger did not change. Baseline mindful awareness was negatively related to left inferior parietal lobule activation to angry faces; trait anger was positively related to right middle frontal gyrus and bilateral angular gyrus. No significant pre-post changes in angry face processing were found, but changes in trait mindful awareness and anger were associated with sub-threshold differences in paralimbic activation. These preliminary and hypothesis-generating findings, suggest the analysis of possible impact of mindfulness training on anger may begin with individual differences in angry face processing. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  4. [Application of the balanced scorecard for evaluating the training process].

    Science.gov (United States)

    Venturoli, Cristiana; Gamberoni, Loredana

    2009-01-01

    A training project in which nurses acted as tutors to novice nurses was introduced in the Ferrara University Hospital, with the aim of helping them to achieve the skills and professional expertise required in an operating theatre environment. Owing to the involvement of all the surgical divisions of the hospital and the continual addition of new staff, the Balanced Scorecard method (BSC) was used to assess the impact of training on the entire organization. The BSC method, a multidimensional method born in the USA in the 1990's, made it possible to assess the utility of training in the light of achieving institutional goals.

  5. Change of body composition in process of power conditional training

    Directory of Open Access Journals (Sweden)

    D.M. Anikieiev

    2015-12-01

    Full Text Available Purpose: to work out recommendations on choosing of exercises for power conditional trainees, considering decrease of fat mass percentage as the purpose. Methods: analysis of changes of body composition of trainees, practicing different kinds of conditional power training. Results: the data about influence of different physical loads on thickness of subcutaneous fat in different parts of body have been generalized. Recommendations on choosing of exercises for power conditional trainees for body composition improving have been presented. It was found that fat loss occurs quicker in upper part of body (subcutaneous and visceral. This is observed with increasing of motor functioning and reducing calories of eating. When training any separate muscular group changes of subcutaneous fat take place not compulsory in body parts, in which the trained group is located. Conclusions: it is purposeful to mainly use basic (multi-joint exercises in power conditional training.

  6. Orbiter data reduction complex data processing requirements for the OFT mission evaluation team (level C)

    Science.gov (United States)

    1979-01-01

    This document addresses requirements for post-test data reduction in support of the Orbital Flight Tests (OFT) mission evaluation team, specifically those which are planned to be implemented in the ODRC (Orbiter Data Reduction Complex). Only those requirements which have been previously baselined by the Data Systems and Analysis Directorate configuration control board are included. This document serves as the control document between Institutional Data Systems Division and the Integration Division for OFT mission evaluation data processing requirements, and shall be the basis for detailed design of ODRC data processing systems.

  7. The effects of mind-body training on stress reduction, positive affect, and plasma catecholamines.

    Science.gov (United States)

    Jung, Ye-Ha; Kang, Do-Hyung; Jang, Joon Hwan; Park, Hye Yoon; Byun, Min Soo; Kwon, Soo Jin; Jang, Go-Eun; Lee, Ul Soon; An, Seung Chan; Kwon, Jun Soo

    2010-07-26

    This study was designed to assess the association between stress, positive affect and catecholamine levels in meditation and control groups. The meditation group consisted of 67 subjects who regularly engaged in mind-body training of "Brain-Wave Vibration" and the control group consisted of 57 healthy subjects. Plasma catecholamine (norepinephrine (NE), epinephrine (E), and dopamine (DA)) levels were measured, and a modified form of the Stress Response Inventory (SRI-MF) and the Positive Affect and Negative Affect Scale (PANAS) were administered. The meditation group showed higher scores on positive affect (p=.019) and lower scores on stress (pmind-body training is associated with lower stress, higher positive affect and higher plasma DA levels when comparing the meditation group with the control group. Thus, mind-body training may influence stress, positive affect and the sympathetic nervous system including DA activity. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

  8. Integral blow moulding for cycle time reduction of CFR-TP aluminium contour joint processing

    Science.gov (United States)

    Barfuss, Daniel; Würfel, Veit; Grützner, Raik; Gude, Maik; Müller, Roland

    2018-05-01

    Integral blow moulding (IBM) as a joining technology of carbon fibre reinforced thermoplastic (CFR-TP) hollow profiles with metallic load introduction elements enables significant cycle time reduction by shortening of the process chain. As the composite part is joined to the metallic part during its consolidation process subsequent joining steps are omitted. In combination with a multi-scale structured load introduction element its form closure function enables to pass very high loads and is capable to achieve high degrees of material utilization. This paper first shows the process set-up utilizing thermoplastic tape braided preforms and two-staged press and internal hydro formed load introduction elements. Second focuses on heating technologies and process optimization. Aiming at cycle time reduction convection and induction heating in regard to the resulting product quality is inspected by photo micrographs and computer tomographic scans. Concluding remarks give final recommendations for the process design in regard to the structural design.

  9. Study on emission characteristics and reduction strategy of nitrous oxide during wastewater treatment by different processes.

    Science.gov (United States)

    Sun, Shichang; Bao, Zhiyuan; Sun, Dezhi

    2015-03-01

    Given the inexorable increase in global wastewater treatment, increasing amounts of nitrous oxide are expected to be emitted from wastewater treatment plants and released to the atmosphere. It has become imperative to study the emission and control of nitrous oxide in the various wastewater treatment processes currently in use. In the present investigation, the emission characteristics and the factors affecting the release of nitrous oxide were studied via full- and pilot-scale experiments in anoxic-oxic, sequencing batch reactor and oxidation ditch processes. We propose an optimal treatment process and relative strategy for nitrous oxide reduction. Our results show that both the bio-nitrifying and bio-denitrifying treatment units in wastewater treatment plants are the predominant sites for nitrous oxide production in each process, while the aerated treatment units are the critical sources for nitrous oxide emission. Compared with the emission of nitrous oxide from the anoxic-oxic (1.37% of N-influent) and sequencing batch reactor (2.69% of N-influent) processes, much less nitrous oxide (0.25% of N-influent) is emitted from the oxidation ditch process, which we determined as the optimal wastewater treatment process for nitrous oxide reduction, given the current technologies. Nitrous oxide emissions differed with various operating parameters. Controlling the dissolved oxygen concentration at a proper level during nitrification and denitrification and enhancing the utilization rate of organic carbon in the influent for denitrification are the two critical methods for nitrous oxide reduction in the various processes considered.

  10. Radiation dose reduction in digital breast tomosynthesis (DBT) by means of deep-learning-based supervised image processing

    Science.gov (United States)

    Liu, Junchi; Zarshenas, Amin; Qadir, Ammar; Wei, Zheng; Yang, Limin; Fajardo, Laurie; Suzuki, Kenji

    2018-03-01

    To reduce cumulative radiation exposure and lifetime risks for radiation-induced cancer from breast cancer screening, we developed a deep-learning-based supervised image-processing technique called neural network convolution (NNC) for radiation dose reduction in DBT. NNC employed patched-based neural network regression in a convolutional manner to convert lower-dose (LD) to higher-dose (HD) tomosynthesis images. We trained our NNC with quarter-dose (25% of the standard dose: 12 mAs at 32 kVp) raw projection images and corresponding "teaching" higher-dose (HD) images (200% of the standard dose: 99 mAs at 32 kVp) of a breast cadaver phantom acquired with a DBT system (Selenia Dimensions, Hologic, CA). Once trained, NNC no longer requires HD images. It converts new LD images to images that look like HD images; thus the term "virtual" HD (VHD) images. We reconstructed tomosynthesis slices on a research DBT system. To determine a dose reduction rate, we acquired 4 studies of another test phantom at 4 different radiation doses (1.35, 2.7, 4.04, and 5.39 mGy entrance dose). Structural SIMilarity (SSIM) index was used to evaluate the image quality. For testing, we collected half-dose (50% of the standard dose: 32+/-14 mAs at 33+/-5 kVp) and full-dose (standard dose: 68+/-23 mAs at 33+/-5 kvp) images of 10 clinical cases with the DBT system at University of Iowa Hospitals and Clinics. NNC converted half-dose DBT images of 10 clinical cases to VHD DBT images that were equivalent to full dose DBT images. Our cadaver phantom experiment demonstrated 79% dose reduction.

  11. Reduction of freezing of gait in Parkinson's disease by repetitive robot-assisted treadmill training: a pilot study

    Directory of Open Access Journals (Sweden)

    Friedman Joseph H

    2010-10-01

    Full Text Available Abstract Background Parkinson's disease is a chronic, neurodegenerative disease characterized by gait abnormalities. Freezing of gait (FOG, an episodic inability to generate effective stepping, is reported as one of the most disabling and distressing parkinsonian symptoms. While there are no specific therapies to treat FOG, some external physical cues may alleviate these types of motor disruptions. The purpose of this study was to examine the potential effect of continuous physical cueing using robot-assisted sensorimotor gait training on reducing FOG episodes and improving gait. Methods Four individuals with Parkinson's disease and FOG symptoms received ten 30-minute sessions of robot-assisted gait training (Lokomat to facilitate repetitive, rhythmic, and alternating bilateral lower extremity movements. Outcomes included the FOG-Questionnaire, a clinician-rated video FOG score, spatiotemporal measures of gait, and the Parkinson's Disease Questionnaire-39 quality of life measure. Results All participants showed a reduction in FOG both by self-report and clinician-rated scoring upon completion of training. Improvements were also observed in gait velocity, stride length, rhythmicity, and coordination. Conclusions This pilot study suggests that robot-assisted gait training may be a feasible and effective method of reducing FOG and improving gait. Videotaped scoring of FOG has the potential advantage of providing additional data to complement FOG self-report.

  12. The Effectiveness of Anger Management Skills Training on Reduction Family Violence and Recovery Marital Satisfaction

    Directory of Open Access Journals (Sweden)

    مدیا تفرشی

    2016-02-01

    Full Text Available Using questionnaires of violence and marital satisfaction, data were collected at pretest, posttest, and follow-up and analyzed by ANCOVA. Results indicated that training of anger management skills can significantly decrease family violence and increase marital satisfaction in householders. In addition, results of follow-up showed that effects of intervention lasted. The results of the study provide some evidence to suggest that training of anger management skills is an appropriate method for reducing violence and increasing marital satisfaction. Anger management skills training help women probably by reinforcement of the behavioral skills of regulation, change and create desirable emotions. As a consequence of decreased undesirable behaviors related to violence, desirable behavioral, emotional and cognitive changes were reinforced in family and marital satisfaction improved. The present study aimed to determine the effectiveness of anger management skills training on family violence and marital satisfaction of householders in Tehran. Methodology was Quasiexperimental on an available sample of 34 subjects from women referring to health houses in region-2 of Tehran and randomly assigned in experimental and control groups.

  13. The electrochemical reduction processes of solid compounds in high temperature molten salts.

    Science.gov (United States)

    Xiao, Wei; Wang, Dihua

    2014-05-21

    Solid electrode processes fall in the central focus of electrochemistry due to their broad-based applications in electrochemical energy storage/conversion devices, sensors and electrochemical preparation. The electrolytic production of metals, alloys, semiconductors and oxides via the electrochemical reduction of solid compounds (especially solid oxides) in high temperature molten salts has been well demonstrated to be an effective and environmentally friendly process for refractory metal extraction, functional materials preparation as well as spent fuel reprocessing. The (electro)chemical reduction of solid compounds under cathodic polarizations generally accompanies a variety of changes at the cathode/melt electrochemical interface which result in diverse electrolytic products with different compositions, morphologies and microstructures. This report summarizes various (electro)chemical reactions taking place at the compound cathode/melt interface during the electrochemical reduction of solid compounds in molten salts, which mainly include: (1) the direct electro-deoxidation of solid oxides; (2) the deposition of the active metal together with the electrochemical reduction of solid oxides; (3) the electro-inclusion of cations from molten salts; (4) the dissolution-electrodeposition process, and (5) the electron hopping process and carbon deposition with the utilization of carbon-based anodes. The implications of the forenamed cathodic reactions on the energy efficiency, chemical compositions and microstructures of the electrolytic products are also discussed. We hope that a comprehensive understanding of the cathodic processes during the electrochemical reduction of solid compounds in molten salts could form a basis for developing a clean, energy efficient and affordable production process for advanced/engineering materials.

  14. Peculiarities of perfection of training process of the qualified bodybuilder in the competitive period

    Directory of Open Access Journals (Sweden)

    V.Yu. Dzhym

    2015-02-01

    Full Text Available Purpose: study methods of improving the training process of skilled bodybuilders in the competitive period. Material : The study involved 18 athletes aged 18-25 years old. The experiment was conducted for 8 weeks. Used two variants of training techniques: large percentage weights; with smooth dynamics with emphasis on static load muscles. Efficacy was evaluated using the preparation method of expert evaluations. The method involved the use of information on the implementation of directives coach dynamics of power and endurance performance, subjective indicators (health, mood, desire to train. Results : comparative characteristic of the most commonly used methods of training process in bodybuilding. Developed and justified best practices, depending on the initial form of the athlete at the beginning of the competition period of training. Shows the dependence of changes in body weight of the athlete training. Conclusions : the proposed best practices, depending on the microcycle training in the competitive period (precompetitive and competitive mesocycles.

  15. Reduction of belt CVT gear noise by gear train modification. Optimize vibration characteristics of gear train; Belt CVT no gear noise teigen gijutsu. Gear train shindo tokusei no saitekika

    Energy Technology Data Exchange (ETDEWEB)

    Arimatsu, M; Kawakami, T [Nissan Motor Co. Ltd., Tokyo (Japan)

    1997-10-01

    With the reduction of vehicle noise, the requirements for an efficient method to reduce transmission gear noise have become stronger yearly. So far efforts to reduce gear noise have generally focused on ways of improving the gears themselves. In addition to these traditional methods, it proved very beneficial to us to optimize the gear train structure. Nissan has just released the new Belt CVT for 2.0L Front wheel drive vehicles. We have been analyzing vibration of the gear train by using a finite element model since the early development stage, and we could achieve the quiet gears effectively. 2 refs., 9 figs.

  16. Direct reduction process using fines and with reduced CO2 emission

    CSIR Research Space (South Africa)

    Morrison, A

    2004-08-01

    Full Text Available , of which there is an abundant supply in South Africa. The rotary hearth process is one and two such units are currently in operation in Japan: one at Nippon Steel and another at Kobe Steel.3 Direct reduction for ferroalloy production offers...

  17. ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS - THE THERMAL DESORPTION UNIT - APPLICATIONS ANALYSIS REPORT

    Science.gov (United States)

    ELI ECO Logic International, Inc.'s Thermal Desorption Unit (TDU) is specifically designed for use with Eco Logic's Gas Phase Chemical Reduction Process. The technology uses an externally heated bath of molten tin in a hydrogen atmosphere to desorb hazardous organic compounds fro...

  18. Nutritional impact of sodium reduction strategies on sodium intake from processed foods

    NARCIS (Netherlands)

    Hendriksen, M.A.H.; Verkaik-Kloosterman, J.; Noort, M.W.; Raaij, J.M.A. van

    2015-01-01

    Background/objectives: Sodium intake in the Netherlands is substantially above the recommended intake of 2400 mg/day. This study aimed to estimate the effect of two sodium reduction strategies, that is, modification of the composition of industrially processed foods toward the technologically

  19. Nutritional impact of sodium reduction strategies on sodium intake from processed foods

    NARCIS (Netherlands)

    Hendriksen, M.A.H.; Verkaik-Kloosterman, J.; Noort, M.W.J.; Raaij, van J.M.A.

    2015-01-01

    Background/objectives: Sodium intake in the Netherlands is substantially above the recommended intake of 2400¿mg/day. This study aimed to estimate the effect of two sodium reduction strategies, that is, modification of the composition of industrially processed foods toward the technologically

  20. Mercury reduction and removal during high-level radioactive waste processing and vitrification

    International Nuclear Information System (INIS)

    Eibling, R.E.; Fowler, J.R.

    1981-01-01

    A reference process for immobilizing the high-level radioactive waste in borosilicate glass has been developed at the Savannah River Plant. This waste contains a substantial amount of mercury from separations processing. Because mercury will not remain in borosilicate glass at the processing temperature, mercury must be removed before vitrification or must be handled in the off-gas system. A process has been developed to remove mercury by reduction with formic acid prior to vitrification. Additional benefits of formic acid treatment include improved sludge handling and glass melter redox control

  1. Microbial dissimilatory iron(III) reduction: Studies on the mechanism and on processes of environmental relevance

    OpenAIRE

    Jahn, Michael

    2005-01-01

    Many microbes are able to respire aerobically oxygen or anaerobically other electron acceptors for example sulphate, nitrate, manganese(IV) or Fe(III). As iron minerals are widespread in nature, dissimilatory iron(III) reduction by different microorganisms is a very important process of anaerobic respiration. The general goal of this work was to improve the knowledge of processes, in which iron-reducing microbes are said to play an important role. For this purpose, in one part the focus wa...

  2. Enhancing Users' Participation in Business Process Modeling through Ontology-Based Training

    Science.gov (United States)

    Macris, A.; Malamateniou, F.; Vassilacopoulos, G.

    Successful business process design requires active participation of users who are familiar with organizational activities and business process modelling concepts. Hence, there is a need to provide users with reusable, flexible, agile and adaptable training material in order to enable them instil their knowledge and expertise in business process design and automation activities. Knowledge reusability is of paramount importance in designing training material on process modelling since it enables users participate actively in process design/redesign activities stimulated by the changing business environment. This paper presents a prototype approach for the design and use of training material that provides significant advantages to both the designer (knowledge - content reusability and semantic web enabling) and the user (semantic search, knowledge navigation and knowledge dissemination). The approach is based on externalizing domain knowledge in the form of ontology-based knowledge networks (i.e. training scenarios serving specific training needs) so that it is made reusable.

  3. Study on the oxidation and reduction of tungsten surface for sub-50 nm patterning process

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Kyu; Nam, Seok Woo; Cho, Sung Il; Jhon, Myung S.; Min, Kyung Suk; Kim, Chan Kyu; Jung, Ho Bum; Yeom, Geun Young [Memory Division Semiconductor Business, Samsung Electronics, San No. 16 Banwol-Ri, Taean-Eup, Hwasung-City, Gyeonggi-Do 449-711, South Korea and Department of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Memory Division Semiconductor Business, Samsung Electronics, San No. 16 Banwol-Ri, Taean-Eup, Hwasung-City, Gyeonggi-Do 449-711 (Korea, Republic of); Department of Chemical Engineering and Data Storage Systems Center, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Department of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 440-746 (Korea, Republic of)

    2012-11-15

    The oxidation characteristics of tungsten line pattern during the carbon-based mask-layer removal process using oxygen plasmas have been investigated for sub-50 nm patterning processes, in addition to the reduction characteristics of the WO{sub x} layer formed on the tungsten line surface using hydrogen plasmas. The surface oxidation of tungsten lines during the mask layer removal process could be minimized by using low-temperature (300 K) plasma processing for the removal of the carbon-based material. Using this technique, the thickness of WO{sub x} on the tungsten line could be decreased to 25% compared to results from high-temperature processing. The WO{sub x} layer could also be completely removed at a low temperature of 300 K using a hydrogen plasma by supplying bias power to the tungsten substrate to provide a activation energy for the reduction. When this oxidation and reduction technique was applied to actual 40-nm-CD device processing, the complete removal of WO{sub x} formed on the sidewall of tungsten line could be observed.

  4. Chemical oxygen demand reduction in coffee wastewater through chemical flocculation and advanced oxidation processes

    Institute of Scientific and Technical Information of China (English)

    ZAYAS Pérez Teresa; GEISSLER Gunther; HERNANDEZ Fernando

    2007-01-01

    The removal of the natural organic matter present in coffee processing wastewater through chemical coagulation-flocculatio and advanced oxidation processes(AOP)had been studied.The effectiveness of the removal of natural organic matter using commercial flocculants and UV/H202,UVO3 and UV/H-H202/O3 processes was determined under acidic conditions.For each of these processes,different operational conditions were explored to optimize the treatment efficiency of the coffee wastewater.Coffee wastewater is characterized by a high chemical oxygen demand(COD)and low total suspended solids.The outcomes of coffee wastewater reeatment using coagulation-flocculation and photodegradation processes were assessed in terms of reduction of COD,color,and turbidity.It was found that a reductiOn in COD of 67%could be realized when the coffee wastewater was treated by chemical coagulation-flocculatlon witll lime and coagulant T-1.When coffee wastewater was treated by coagulation-flocculation in combination with UV/H202,a COD reduction of 86%was achieved,although only after prolonged UV irradiation.Of the three advanced oxidation processes considered,UV/H202,uv/03 and UV/H202/03,we found that the treatment with UV/H2O2/O3 was the most effective,with an efficiency of color,turbidity and further COD removal of 87%,when applied to the flocculated coffee wastewater.

  5. Specification, construction, and exact reduction of state transition system models of biochemical processes.

    Science.gov (United States)

    Bugenhagen, Scott M; Beard, Daniel A

    2012-10-21

    Biochemical reaction systems may be viewed as discrete event processes characterized by a number of states and state transitions. These systems may be modeled as state transition systems with transitions representing individual reaction events. Since they often involve a large number of interactions, it can be difficult to construct such a model for a system, and since the resulting state-level model can involve a huge number of states, model analysis can be difficult or impossible. Here, we describe methods for the high-level specification of a system using hypergraphs, for the automated generation of a state-level model from a high-level model, and for the exact reduction of a state-level model using information from the high-level model. Exact reduction is achieved through the automated application to the high-level model of the symmetry reduction technique and reduction by decomposition by independent subsystems, allowing potentially significant reductions without the need to generate a full model. The application of the method to biochemical reaction systems is illustrated by models describing a hypothetical ion-channel at several levels of complexity. The method allows for the reduction of the otherwise intractable example models to a manageable size.

  6. Improving the training process of skilled bodybuilders in specially-preparatory phase of the preparatory period

    Directory of Open Access Journals (Sweden)

    Viktor Dzhym

    2014-12-01

    Full Text Available Purpose: to study methods of improving the training process of skilled bodybuilders in a specially-preparatory phase of the preparatory period. Materials and Methods: the study involved 18 skilled bodybuilders are included in the team of the Kharkiv region of bodybuilding. Results: a comparative characteristic of the most commonly used methods of training process in bodybuilding. Developed and justified the optimal technique for skilled bodybuilders, depending on the initial form of the athlete at the beginning of a specially-preparatory phase of training. Shows the dependence of changes in body weight bodybuilder from the training process. Conclusions: on the basis of the research the author proposes an optimal method of training depending on the training microcycle in the run specially-preparatory stage.

  7. Reductions in Sprint Paddling Ability and Countermovement Jump Performance After Surfing Training.

    Science.gov (United States)

    Secomb, Josh L; Sheppard, Jeremy M; Dascombe, Ben J

    2015-07-01

    The present study aimed to determine whether any meaningful change in a surfer's sprint paddling ability and countermovement jump (CMJ) performance developed after a 2-hour surfing training session and also whether any physical demands of the surfing session were related to the resultant changes in the capacities. Fifteen competitive male surfing athletes (age, 22.1 ± 3.9 years; height, 175.4 ± 6.4 cm; body mass, 72.5 ± 7.7 kg) performed a 2-hour surfing training session, with 15-m sprint paddle and CMJ trials performed both before and after the surfing session. Pre- to posttesting measures were analyzed using magnitude-based inferences. Likely declines were observed in the velocity achieved at the 5-, 10-, and 15-m splits of the 15-m sprint paddle, as well as peak velocity. Similarly, likely declines were calculated for CMJ peak force, relative peak force, and jump height. Furthermore, large correlations were calculated between presurfing session peak velocity and the change in 5, 10, 15 m, and peak velocity of the 15-m sprint paddle and total distance covered, wave riding bouts, and success rate. Surfing athletes and coaches may need to consider implementing shorter duration training sessions to reduce the decline in sprint paddling ability and CMJ performance. Furthermore, surfing athletes should possess highly developed sprint paddling ability because this may allow them to undertake a greater workload and catch more waves, which will increase the opportunity for technical refinement of maneuvers and skill acquisition.

  8. Shutting down sensorimotor interference unblocks the networks for stimulus processing: an SMR neurofeedback training study.

    Science.gov (United States)

    Kober, Silvia Erika; Witte, Matthias; Stangl, Matthias; Väljamäe, Aleksander; Neuper, Christa; Wood, Guilherme

    2015-01-01

    In the present study, we investigated how the electrical activity in the sensorimotor cortex contributes to improved cognitive processing capabilities and how SMR (sensorimotor rhythm, 12-15Hz) neurofeedback training modulates it. Previous evidence indicates that higher levels of SMR activity reduce sensorimotor interference and thereby promote cognitive processing. Participants were randomly assigned to two groups, one experimental (N=10) group receiving SMR neurofeedback training, in which they learned to voluntarily increase SMR, and one control group (N=10) receiving sham feedback. Multiple cognitive functions and electrophysiological correlates of cognitive processing were assessed before and after 10 neurofeedback training sessions. The experimental group but not the control group showed linear increases in SMR power over training runs, which was associated with behavioural improvements in memory and attentional performance. Additionally, increasing SMR led to a more salient stimulus processing as indicated by increased N1 and P3 event-related potential amplitudes after the training as compared to the pre-test. Finally, functional brain connectivity between motor areas and visual processing areas was reduced after SMR training indicating reduced sensorimotor interference. These results indicate that SMR neurofeedback improves stimulus processing capabilities and consequently leads to improvements in cognitive performance. The present findings contribute to a better understanding of the mechanisms underlying SMR neurofeedback training and cognitive processing and implicate that SMR neurofeedback might be an effective cognitive training tool. Copyright © 2014 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

  9. Effects of endurance training on reduction of plasma glucose during high intensity constant and incremental speed tests in Wistar rats

    Directory of Open Access Journals (Sweden)

    P. Abreu

    Full Text Available The aim of this research was to investigate the effects of endurance training on reduction of plasma glucose during high intensity constant and incremental speed tests in Wistar rats. We hypothesized that plasma glucose might be decreased in the exercised group during heavy (more intense exercise. Twenty-four 10-week-old male Wistar rats were randomly assigned to sedentary and exercised groups. The prescription of endurance exercise training intensity was determined as 60% of the maximum intensity reached at the incremental speed test. The animals were trained by running on a motorized treadmill, five days/week for a total period of 67 weeks. Plasma glucose during the constant speed test in the exercised group at 20 m/min was reduced at the 14th, 21st and 28th min compared to the sedentary group, as well at 25 m/min at the 21st and 28th min. Plasma glucose during the incremental speed test was decreased in the exercised group at the moment of exhaustion (48th min compared to the sedentary group (27th min. Endurance training positively modulates the mitochondrial activity and capacity of substrate oxidation in muscle and liver. Thus, in contrast to other studies on high load of exercise, the effects of endurance training on the decrease of plasma glucose during constant and incremental speed tests was significantly higher in exercised than in sedentary rats and associated with improved muscle and hepatic oxidative capacity, constituting an important non-pharmacological intervention tool for the prevention of insulin resistance, including type 2 diabetes mellitus.

  10. Surface-reconstructed Cu Electrode via a Facile Electrochemical Anodization-Reduction Process for Low Overpotential CO 2 reduction

    KAUST Repository

    Min, Shixiong; Yang, Xiulin; Lu, Ang-Yu; Tseng, Chien-Chih; Hedhili, Mohamed N.; Lai, Zhiping; Li, Lain-Jong; Huang, Kuo-Wei

    2017-01-01

    A high-surface-area Cu electrode, fabricated by a simple electrochemical anodization-reduction method, exhibits high activity and selectivity for CO2 reduction at low overpotential in 0.1 M KHCO3 solution. A faradaic efficiency of 37% for HCOOH

  11. Process flows for cyber forensic training and operations

    CSIR Research Space (South Africa)

    Venter, JP

    2006-02-01

    Full Text Available In this paper the development and testing of Cyber First Responder Process Flows is discussed. A generic process flow framework is presented and design principles and layout characteristics as well as important points within the process flows...

  12. Preparation of rare earth-cobalt magnet alloy by reduction-diffusion process

    International Nuclear Information System (INIS)

    Krishnan, T.S.

    1980-01-01

    Preparation of rare earth-cobalt alloys by reduction-diffusion (R-D) process is described. The process essentially involves mixing of the rare earth oxide and cobalt/cobalt oxide powders in proper proportion and high temperature reduction of the charge in hydrogen atmosphere, followed by aqueous leaching of the reduced mass to yield the alloy powder. Comparison is made of the magnetic properties of the R-D powder with those of the powder prepared by the direct melting (DM) route and it is observed from the reported values for SmCo 5 that the energy product of the R-D powder (approximately 22 MGOe) is only marginally lower than that of the directly melted alloy (approximately 25 MGOe). The paper also includes the results of studies carried out at the Bhabha Atomic Research Centre, Bombay, on the preparation of misch metal-cobalt alloy by the R-D process. (auth.)

  13. Corrosion Testing of Monofrax K-3 Refractory in Defense Waste Processing Facility (DWPF) Alternate Reductant Feeds

    Energy Technology Data Exchange (ETDEWEB)

    Williams, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jantzen, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Burket, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-04-06

    The Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) uses a combination of reductants and oxidants while converting high level waste (HLW) to a borosilicate waste form. A reducing flowsheet is maintained to retain radionuclides in their reduced oxidation states which promotes their incorporation into borosilicate glass. For the last 20 years of processing, the DWPF has used formic acid as the main reductant and nitric acid as the main oxidant. During reaction in the Chemical Process Cell (CPC), formate and formic acid release measurably significant H2 gas which requires monitoring of certain vessel’s vapor spaces. A switch to a nitric acid-glycolic acid (NG) flowsheet from the nitric-formic (NF) flowsheet is desired as the NG flowsheet releases considerably less H2 gas upon decomposition. This would greatly simplify DWPF processing from a safety standpoint as close monitoring of the H2 gas concentration could become less critical. In terms of the waste glass melter vapor space flammability, the switch from the NF flowsheet to the NG flowsheet showed a reduction of H2 gas production from the vitrification process as well. Due to the positive impact of the switch to glycolic acid determined on the flammability issues, evaluation of the other impacts of glycolic acid on the facility must be examined.

  14. Effects of sprint interval training and body weight reduction on power to weight ratio in experienced cyclists.

    Science.gov (United States)

    Lunn, William R; Finn, Joan A; Axtell, Robert S

    2009-07-01

    The purpose of this study was to determine the effect of supramaximal sprint interval training (SIT), body weight reduction, and a combination of both treatments on peak and average anaerobic power to weight ratio (PPOan:Wt, APOan:Wt) by manipulating peak and average anaerobic power output (PPOan, APOan) and body weight (BW) in experienced cyclists. Participants (N = 34, age = 38.0 +/- 7.1 years) were assigned to 4 groups for a 10-week study. One group performed twice-weekly SIT sessions on a cycle ergometer while maintaining body weight (SIT). A second group did not perform SIT but intentionally reduced body weight (WR). A third group simultaneously performed SIT sessions and reduced body weight (SIT+WR). A control group cycled in their normal routine and maintained body weight (CON). The 30-second Wingate Test assessed pretest and posttest POan:Wt scores. There was a significant mean increase (p weight (kg) decreased significantly in WR and SIT + WR (80.3 +/- 13.7 to 75.3 +/- 11.9 and 78.9 +/- 10.8 to 73.4 +/- 10.8, respectively). The results demonstrate that cyclists can use SIT sessions and body weight reduction as singular training interventions to effect significant increases in anaerobic power to weight ratio, which has been correlated to enhanced aerobic cycling performance. However, the treatments were not effective as combined interventions, as there was no significant change in either PPOan:Wt or APOan:Wt in SIT + WR.

  15. Selective catalytic reduction system and process using a pre-sulfated zirconia binder

    Science.gov (United States)

    Sobolevskiy, Anatoly; Rossin, Joseph A.

    2010-06-29

    A selective catalytic reduction (SCR) process with a palladium catalyst for reducing NOx in a gas, using hydrogen as a reducing agent is provided. The process comprises contacting the gas stream with a catalyst system, the catalyst system comprising (ZrO.sub.2)SO.sub.4, palladium, and a pre-sulfated zirconia binder. The inclusion of a pre-sulfated zirconia binder substantially increases the durability of a Pd-based SCR catalyst system. A system for implementing the disclosed process is further provided.

  16. Social Cognitive Training Improves Emotional Processing and Reduces Aggressive Attitudes in Ex-combatants

    Science.gov (United States)

    Trujillo, Sandra; Trujillo, Natalia; Lopez, Jose D.; Gomez, Diana; Valencia, Stella; Rendon, Jorge; Pineda, David A.; Parra, Mario A.

    2017-01-01

    Emotional processing (EP) is a complex cognitive function necessary to successfully adjust to social environments where we need to interpret and respond to cues that convey threat or reward signals. Ex-combatants have consistently shown atypical EP as well as poor social interactions. Available reintegration programs aim to facilitate the re-adaptation of ex-combatants to their communities. However, they do not incorporate actions to improve EP and to enhance cognitive-emotional regulation. The present study was aimed at evaluating the usefulness of an intervention focused on Social Cognitive Training (SCT), which was designed to equip ex-combatants enrolled in the Social Reintegration Route with EP and social cognition skills. A group of 31 ex-combatants (mean age of 37.2, 29 men) from Colombian illegal armed groups were recruited into this study. Of these, 16 were invited to take part in a SCT and the other continued with the conventional reintegration intervention. Both groups underwent 12 training sessions in a period 12–14 weeks. They were assessed with a comprehensive protocol which included Psychosocial, Behavioral, and Emotion Processing instruments. The scores on these instruments prior to and after the intervention were compared within and between groups. Both groups were matched at baseline. Ex-combatants receiving the SCT experienced significant improvements in EP and a reduction in aggressive attitudes, effects not observed in those continuing the conventional reintegration intervention. This is the first study that achieves such outcomes in such a population using SCT intervention. We discuss the implications of such results toward better social reintegration strategies. PMID:28428767

  17. Westinghouse Modular Grinding Process - Enhancement of Volume Reduction for Hot Resin Supercompaction - 13491

    Energy Technology Data Exchange (ETDEWEB)

    Fehrmann, Henning [Westinghouse Electric Germany GmbH, Dudenstr. 44, D-68167 Mannheim (Germany); Aign, Joerg [Westinghouse Electric Germany GmbH, Global D and D and Waste Management, Tarpenring 6, D-22419 Hamburg (Germany)

    2013-07-01

    In nuclear power plants (NPP) ion exchange (IX) resins are used in several systems for water treatment. Spent resins can contain a significant amount of contaminates which makes treatment for disposal of spent resins mandatory. Several treatment processes are available such as direct immobilization with technologies like cementation, bitumisation, polymer solidification or usage of a high integrity container (HIC). These technologies usually come with a significant increase in final waste volume. The Hot Resin Supercompaction (HRSC) is a thermal treatment process which reduces the resin waste volume significantly. For a mixture of powdered and bead resins the HRSC process has demonstrated a volume reduction of up to 75 % [1]. For bead resins only the HRSC process is challenging because the bead resins compaction properties are unfavorable. The bead resin material does not form a solid block after compaction and shows a high spring back effect. The volume reduction of bead resins is not as good as for the mixture described in [1]. The compaction properties of bead resin waste can be significantly improved by grinding the beads to powder. The grinding also eliminates the need for a powder additive.Westinghouse has developed a modular grinding process to grind the bead resin to powder. The developed process requires no circulation of resins and enables a selective adjustment of particle size and distribution to achieve optimal results in the HRSC or in any other following process. A special grinding tool setup is use to minimize maintenance and radiation exposure to personnel. (authors)

  18. Recovery Of Nickel From Spent Nickel-Cadmium Batteries Using A Direct Reduction Process

    Directory of Open Access Journals (Sweden)

    Shin D.J.

    2015-06-01

    Full Text Available Most nickel is produced as Ferro-Nickel through a smelting process from Ni-bearing ore. However, these days, there have been some problems in nickel production due to exhaustion and the low-grade of Ni-bearing ore. Moreover, the smelting process results in a large amount of wastewater, slag and environmental risk. Therefore, in this research, spent Ni-Cd batteries were used as a base material instead of Ni-bearing ore for the recovery of Fe-Ni alloy through a direct reduction process. Spent Ni-Cd batteries contain 24wt% Ni, 18.5wt% Cd, 12.1% C and 27.5wt% polymers such as KOH. For pre-treatment, Cd was vaporized at 1024K. In order to evaluate the reduction conditions of nickel oxide and iron oxide, pre-treated spent Ni-Cd batteries were experimented on under various temperatures, gas-atmospheres and crucible materials. By a series of process, alloys containing 75 wt% Ni and 20 wt% Fe were produced. From the results, the reduction mechanism of nickel oxide and iron oxide were investigated.

  19. Ochratoxin A reduction in meat sausages using processing methods practiced in households.

    Science.gov (United States)

    Pleadin, Jelka; Perši, Nina; Kovačević, Dragan; Vulić, Ana; Frece, Jadranka; Markov, Ksenija

    2014-01-01

    The aim of this study was to investigate the possibilities of ochratoxin A (OTA) reduction in home-made meat products. Meat sausages (n = 50) produced from raw materials coming from pigs exposed to OTA-contaminated feed, were subject to common heat processes practiced in households (cooking, frying and baking). Concentrations of OTA in pre- and post-processed products were quantified using a validated immunoassay method, enzyme-linked immunosorbent assay, and confirmed using a high-performance liquid chromatography with fluorescence detection. In line with the differences in recipes used and the degree of OTA accumulation in raw materials, OTA concentrations established in Mediterranean and roast sausages were lower than those found in liver and blood sausages. Baking of contaminated sausages at the temperatures of 190-220°C (for 60 min) resulted in significant reduction of OTA levels (75.8%), while 30-min cooking (at 100°C) and frying (at 170°C) proved to be significantly less effective (e.g. yielding OTA reductions of 7.4% and 12.6%, respectively). The results pointed out that despite high OTA stability, heat processes are capable of reducing its concentration in home-made meat products, depending on the processing modality used.

  20. Development Of Chemical Reduction And Air Stripping Processes To Remove Mercury From Wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, Dennis G.; Looney, Brian B.; Craig, Robert R.; Thompson, Martha C.; Kmetz, Thomas F.

    2013-07-10

    This study evaluates the removal of mercury from wastewater using chemical reduction and air stripping using a full-scale treatment system at the Savannah River Site. The existing water treatment system utilizes air stripping as the unit operation to remove organic compounds from groundwater that also contains mercury (C ~ 250 ng/L). The baseline air stripping process was ineffective in removing mercury and the water exceeded a proposed limit of 51 ng/L. To test an enhancement to the existing treatment modality a continuous dose of reducing agent was injected for 6-hours at the inlet of the air stripper. This action resulted in the chemical reduction of mercury to Hg(0), a species that is removable with the existing unit operation. During the injection period a 94% decrease in concentration was observed and the effluent satisfied proposed limits. The process was optimized over a 2-day period by sequentially evaluating dose rates ranging from 0.64X to 297X stoichiometry. A minimum dose of 16X stoichiometry was necessary to initiate the reduction reaction that facilitated the mercury removal. Competing electron acceptors likely inhibited the reaction at the lower 1 doses, which prevented removal by air stripping. These results indicate that chemical reduction coupled with air stripping can effectively treat large-volumes of water to emerging part per trillion regulatory standards for mercury.

  1. Mineralization of 2-chlorophenol by sequential electrochemical reductive dechlorination and biological processes

    Energy Technology Data Exchange (ETDEWEB)

    Arellano-González, Miguel Ángel; González, Ignacio [Universidad Autónoma Metropolitana-Iztapalapa, Departamento de Química, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D.F. (Mexico); Texier, Anne-Claire, E-mail: actx@xanum.uam.mx [Universidad Autónoma Metropolitana-Iztapalapa, Departamento de Biotecnología, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico, D.F. (Mexico)

    2016-08-15

    Highlights: • Dechlorination of 2-chlorophenol to phenol was 100% efficient on Pd-Ni/Ti electrode. • An ECCOCEL reactor was efficient and selective to obtain phenol from 2-chlorophenol. • Phenol was totally mineralized in a coupled denitrifying biorreactor. • Global time of 2-chlorophenol mineralization in the combined system was 7.5 h. - Abstract: In this work, a novel approach was applied to obtain the mineralization of 2-chlorophenol (2-CP) in an electrochemical-biological combined system where an electrocatalytic dehydrogenation process (reductive dechlorination) was coupled to a biological denitrification process. Reductive dechlorination of 2-CP was conducted in an ECCOCEL-type reactor on a Pd-Ni/Ti electrode at a potential of −0.40 V vs Ag/AgCl{sub (s)}/KCl{sub (sat)}, achieving 100 percent transformation of 2-CP into phenol. The electrochemically pretreated effluent was fed to a rotating cylinder denitrifying bioreactor where the totality of phenol was mineralized by denitrification, obtaining CO{sub 2} and N{sub 2} as the end products. The total time required for 2-CP mineralization in the combined electrochemical-biological process was 7.5 h. This value is close to those previously reported for electrochemical and advanced oxidation processes but in this case, an efficient process was obtained without accumulation of by-products or generation of excessive energy costs due to the selective electrochemical pretreatment. This study showed that the use of electrochemical reductive pretreatment combined with biological processes could be a promising technology for the removal of recalcitrant molecules, such as chlorophenols, from wastewaters by more efficient, rapid, and environmentally friendly processes.

  2. Study and optimization of the carbothermic reduction process for obtaining boron carbide

    International Nuclear Information System (INIS)

    Castro, A.R.M. de.

    1989-01-01

    Boron carbide - B sub(4)C - is a ceramic material of technological importance due to its hardness and high chemical and thermal stabilities. Moreover, its high neutron capture cross section makes it suitable for application as neutron absorber in nuclear technology. The process for obtaining carbothermally derived boron carbide has been studied in two steps: firstly, the parameters of the boric acid → boron oxide dehydration reaction have been defined; secondly, the optimization of the carbothermal reduction reaction using boron oxide has been undertaken looking for boron carbide having low level of free carbon. The starting materials as well as the main products have been studied by chemical and spectrographic analyses, X-ray diffractometry, granulometric classification and scanning electron microscopy. The optimization of the carbothermic reduction process allowed for the development and set up of a fabrication procedure yielding high quality B sub(4) C powders, starting from low cost and easily available (in the Brazilian market) raw materials. (author)

  3. Unusual nonlinear absorption response of graphene oxide in the presence of a reduction process

    International Nuclear Information System (INIS)

    Karimzadeh, Rouhollah; Arandian, Alireza

    2015-01-01

    The nonlinear absorption responses of graphene, graphene oxide and reduced graphene oxide are investigated using the Z-scan technique and laser beams at 405, 532 and 635 nm in a continuous wave regime. Results show that graphene, graphene oxide and reduced graphene oxide do not show any open Z-scan signals at wavelengths of 532 and 635 nm. At the same time, fresh graphene oxide suspension is found to exhibit a nonlinear absorption process in the case of a laser light at 405 nm. Moreover, it can be observed that the reduction of graphene oxide by 405 nm laser irradiation decreases its nonlinear absorption value significantly. These findings highlight the important role of the reduction process on the nonlinear absorption performance of graphene oxide. (letter)

  4. Incineration as a radioactive waste volume reduction process for CEA nuclear centers

    International Nuclear Information System (INIS)

    Atabek, R.; Chaudon, L.

    1994-01-01

    Incineration processes represent a promising solution for waste volume reduction, and will be increasingly used in the future. The features and performance specifications of low-level waste incinerators with capacities ranging from 10 to 20 kg - h -1 at the Fontenay-aux-Roses, Grenoble and Cadarache nuclear centers in France are briefly reviewed. More extensive knowledge of low-level wastes produced in facilities operated by the Commissariat a l'Energie Atomique (CEA) has allowed us to assess the volume reduction obtained by processing combustible waste in existing incinerators. Research and development work is in progress to improve management procedures for higher-level waste and to build facilities capable of incinerating α - contaminated waste. (authors). 6 refs., 5 figs., 1 tab

  5. Quality problems root cause identification and variability reduction in casting processes

    Directory of Open Access Journals (Sweden)

    G. Furgał

    2009-01-01

    Full Text Available Increasing customer requirements and production costs force casting manufacturers to adopt a methodological approach to manufacturingprocesses, in order to deliver increasingly more repeatable, predictable and competitive products. One of the methods of achieving such results is the reduction of variability of manufacturing processes and the optimization of their control. This paper presents the possibilities granted by the Six Sigma methodology in efficient identification of special factors influencing pre-heat of ceramic moulds and castingparameters, in the minimization of the frequency at which they occur, and in the reduction of key process parameters variability. This paper also shows the usability of the method in achieving measurable business advantages for the company using the example of one DMAIC methodology based project realized in the Investment Foundry Department of WSK “PZL-Rzeszow” S.A.

  6. Magnetic losses reduction in grain oriented silicon steel by pulse and continuous fiber laser processing

    Science.gov (United States)

    Petryshynets, Ivan; Kováč, František; Puchý, Viktor; Šebek, Martin; Füzer, Ján; Kollár, Peter

    2018-04-01

    The present paper shows the impact of different laser scribing conditions on possible reduction of magnetic losses in grain oriented electrical steel sheets. The experimental Fe-3%Si steel was taken from industrial line after final box annealing. The surface of investigated steel was subjected to fiber laser processing using both pulse and continuous scribing regimes in order to generate residual thermal stresses inducing the magnetic domains structure refinement. The magnetic losses of experimental samples before and after individual laser scribing regimes were tested in AC magnetic field with 50Hz frequency and induction of 1.5T. The most significant magnetic losses reduction of 38% was obtained at optimized conditions of continuous laser scribing regime. A semi quantitative relationship has been found between the domain patterns and the used fiber laser processing.

  7. Magnetic losses reduction in grain oriented silicon steel by pulse and continuous fiber laser processing

    Directory of Open Access Journals (Sweden)

    Ivan Petryshynets

    2018-04-01

    Full Text Available The present paper shows the impact of different laser scribing conditions on possible reduction of magnetic losses in grain oriented electrical steel sheets. The experimental Fe-3%Si steel was taken from industrial line after final box annealing. The surface of investigated steel was subjected to fiber laser processing using both pulse and continuous scribing regimes in order to generate residual thermal stresses inducing the magnetic domains structure refinement. The magnetic losses of experimental samples before and after individual laser scribing regimes were tested in AC magnetic field with 50Hz frequency and induction of 1.5T. The most significant magnetic losses reduction of 38% was obtained at optimized conditions of continuous laser scribing regime. A semi quantitative relationship has been found between the domain patterns and the used fiber laser processing.

  8. Interactive Whiteboard Integration in Classrooms: Active Teachers Understanding about Their Training Process

    Science.gov (United States)

    Pujol, Meritxell Cortada; Quintana, Maria Graciela Badilla; Romaní, Jordi Riera

    With the incorporation in education of Information and Communication Technologies (ICT), especially the Interactive Whiteboard (IWB), emerges the need for a proper teacher training process due to adequate the integration and the didactic use of this tool in the classroom. This article discusses the teachers' perception on the training process for ICT integration. Its main aim is to contribute to the unification of minimum criteria for effective ICT implementation in any training process for active teachers. This case study begins from the development of a training model called Eduticom which was putted into practice in 4 schools in Catalonia, Spain. Findings indicated different teachers' needs such as an appropriate infrastructure, a proper management and a flexible training model which essentially addresses methodological and didactic aspects of IWB uses in the classroom.

  9. New photocatalytic process provides 99.9+% reduction of VOC at Superfund site

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1999-03-01

    A new photocatalytic process, dubbed the A-I-R-2000 Process, is described. The process is said to offer marked economic advantages, while providing consistent 99.9+% reduction of volatile organic compounds (VOCs) from soil vapours and groundwater at the Stamina Mills Superfund site in North Smithfield, Rhode Island. The A-I-R-2000 process has been developed by KSE Inc., of Amherst, Massachusetts, and has been licensed exclusively worldwide to Trojan Technologies, Inc., of London, Ontario. The process consists essentially of adsorption of VOCs onto a UV light-activated proprietary catalysts, for breakdown to carbon dioxide and water, and also to hydrochloric acid and a small amount of chlorine gas when the VOCs are chlorinated. With a maximum internal operating temperature of 125 degrees F, it is a low-energy system when compared to other catalytic technologies that feature thermal catalytic equipment. 1 photo.

  10. Gaussian processes with built-in dimensionality reduction: Applications to high-dimensional uncertainty propagation

    International Nuclear Information System (INIS)

    Tripathy, Rohit; Bilionis, Ilias; Gonzalez, Marcial

    2016-01-01

    Uncertainty quantification (UQ) tasks, such as model calibration, uncertainty propagation, and optimization under uncertainty, typically require several thousand evaluations of the underlying computer codes. To cope with the cost of simulations, one replaces the real response surface with a cheap surrogate based, e.g., on polynomial chaos expansions, neural networks, support vector machines, or Gaussian processes (GP). However, the number of simulations required to learn a generic multivariate response grows exponentially as the input dimension increases. This curse of dimensionality can only be addressed, if the response exhibits some special structure that can be discovered and exploited. A wide range of physical responses exhibit a special structure known as an active subspace (AS). An AS is a linear manifold of the stochastic space characterized by maximal response variation. The idea is that one should first identify this low dimensional manifold, project the high-dimensional input onto it, and then link the projection to the output. If the dimensionality of the AS is low enough, then learning the link function is a much easier problem than the original problem of learning a high-dimensional function. The classic approach to discovering the AS requires gradient information, a fact that severely limits its applicability. Furthermore, and partly because of its reliance to gradients, it is not able to handle noisy observations. The latter is an essential trait if one wants to be able to propagate uncertainty through stochastic simulators, e.g., through molecular dynamics codes. In this work, we develop a probabilistic version of AS which is gradient-free and robust to observational noise. Our approach relies on a novel Gaussian process regression with built-in dimensionality reduction. In particular, the AS is represented as an orthogonal projection matrix that serves as yet another covariance function hyper-parameter to be estimated from the data. To train the

  11. Gaussian processes with built-in dimensionality reduction: Applications to high-dimensional uncertainty propagation

    Science.gov (United States)

    Tripathy, Rohit; Bilionis, Ilias; Gonzalez, Marcial

    2016-09-01

    Uncertainty quantification (UQ) tasks, such as model calibration, uncertainty propagation, and optimization under uncertainty, typically require several thousand evaluations of the underlying computer codes. To cope with the cost of simulations, one replaces the real response surface with a cheap surrogate based, e.g., on polynomial chaos expansions, neural networks, support vector machines, or Gaussian processes (GP). However, the number of simulations required to learn a generic multivariate response grows exponentially as the input dimension increases. This curse of dimensionality can only be addressed, if the response exhibits some special structure that can be discovered and exploited. A wide range of physical responses exhibit a special structure known as an active subspace (AS). An AS is a linear manifold of the stochastic space characterized by maximal response variation. The idea is that one should first identify this low dimensional manifold, project the high-dimensional input onto it, and then link the projection to the output. If the dimensionality of the AS is low enough, then learning the link function is a much easier problem than the original problem of learning a high-dimensional function. The classic approach to discovering the AS requires gradient information, a fact that severely limits its applicability. Furthermore, and partly because of its reliance to gradients, it is not able to handle noisy observations. The latter is an essential trait if one wants to be able to propagate uncertainty through stochastic simulators, e.g., through molecular dynamics codes. In this work, we develop a probabilistic version of AS which is gradient-free and robust to observational noise. Our approach relies on a novel Gaussian process regression with built-in dimensionality reduction. In particular, the AS is represented as an orthogonal projection matrix that serves as yet another covariance function hyper-parameter to be estimated from the data. To train the

  12. Gaussian processes with built-in dimensionality reduction: Applications to high-dimensional uncertainty propagation

    Energy Technology Data Exchange (ETDEWEB)

    Tripathy, Rohit, E-mail: rtripath@purdue.edu; Bilionis, Ilias, E-mail: ibilion@purdue.edu; Gonzalez, Marcial, E-mail: marcial-gonzalez@purdue.edu

    2016-09-15

    Uncertainty quantification (UQ) tasks, such as model calibration, uncertainty propagation, and optimization under uncertainty, typically require several thousand evaluations of the underlying computer codes. To cope with the cost of simulations, one replaces the real response surface with a cheap surrogate based, e.g., on polynomial chaos expansions, neural networks, support vector machines, or Gaussian processes (GP). However, the number of simulations required to learn a generic multivariate response grows exponentially as the input dimension increases. This curse of dimensionality can only be addressed, if the response exhibits some special structure that can be discovered and exploited. A wide range of physical responses exhibit a special structure known as an active subspace (AS). An AS is a linear manifold of the stochastic space characterized by maximal response variation. The idea is that one should first identify this low dimensional manifold, project the high-dimensional input onto it, and then link the projection to the output. If the dimensionality of the AS is low enough, then learning the link function is a much easier problem than the original problem of learning a high-dimensional function. The classic approach to discovering the AS requires gradient information, a fact that severely limits its applicability. Furthermore, and partly because of its reliance to gradients, it is not able to handle noisy observations. The latter is an essential trait if one wants to be able to propagate uncertainty through stochastic simulators, e.g., through molecular dynamics codes. In this work, we develop a probabilistic version of AS which is gradient-free and robust to observational noise. Our approach relies on a novel Gaussian process regression with built-in dimensionality reduction. In particular, the AS is represented as an orthogonal projection matrix that serves as yet another covariance function hyper-parameter to be estimated from the data. To train the

  13. Process mining approach for recovery of realized train paths and route conflict identification

    NARCIS (Netherlands)

    Kecman, P.; Goverde, R.M.P.

    2012-01-01

    Data records from train describer systems are a valuable source of information for analyzing railway operations performance and assessing railway timetable quality. This paper presents a tool based on process mining event data records from the Dutch train describer system TROTS. The underlying

  14. Process Evaluation of the Teacher Training for an AIDS Prevention Programme

    Science.gov (United States)

    Ahmed, Nazeema; Flisher, Alan J.; Mathews, Catherine; Jansen, Shahieda; Mukoma, Wanjiru; Schaalma, Herman

    2006-01-01

    This paper provides a process evaluation of a 6-day teacher training programme which forms part of a sexuality education project. The training aimed at providing teachers with the necessary knowledge and skills to effectively teach a 16-lesson Grade 8 (14 year olds) life skills curriculum consisting of participatory exercises on sexual…

  15. ‘CLOUD COMPUTING’ INTEGRATION INTO THE TRAINING PROCESS OF HIGHER SCHOOL

    Directory of Open Access Journals (Sweden)

    T. V. Zaytseva

    2013-03-01

    Full Text Available To improve the training process is necessary to use such powerful technologies, as ‘cloud computing’. Supporting traditional training forms, it’s the new epoch of education development. It’s also economic, effective and flexible way to satisfy the needs of taught in new knowledge getting.

  16. Cross-training workers in dual resource constrained systems with heterogeneous processing times

    NARCIS (Netherlands)

    Bokhorst, J. A. C.; Gaalman, G. J. C.

    2009-01-01

    In this paper, we explore the effect of cross-training workers in Dual Resource Constrained (DRC) systems with machines having different mean processing times. By means of queuing and simulation analysis, we show that the detrimental effects of pooling (cross-training) previously found in single

  17. Historical overview of the process of training of Senior Technician in Nursing in relation to research training

    Directory of Open Access Journals (Sweden)

    Lola Rosario Altamirano-Baquerizo

    2016-07-01

    Full Text Available The formation of the Senior Technician in Nursing has been studied by many researchers as a process that integrates knowledge, skills and attitudes for the development of techniques and nursing procedures to healthy individuals or patients, families and community in the various bodies of the Network Asistencial. This paper identifies the training needs of Technician in Nursing, as it has found some shortcomings that do not refer to little curricular and methodological intent of the research training of this professional in the Bolivarian Technological Institute of Ecuador. In addressing the characterization of the historical background of the formation of the Senior Technician in Nursing el-logical historical method to use as documentation reviewing educational programs and policies of vocational training the technical level in the Ecuadorian higher education was used.

  18. Survey of biological processes for odor reduction; Kartlaeggning och studie av biologiska processer foer luktreduktion

    Energy Technology Data Exchange (ETDEWEB)

    Arrhenius, Karine; Rosell, Lars [SP Technical Research Inst. of Sweden, Boraas (Sweden); Hall, Gunnar [SIK Swedish Inst. for Food and Biotechnology, Gothenburg (Sweden)

    2009-09-15

    This project aims to characterize chemical and subsequently odor emissions from a digester plant located closed to Boraas in Sweden (Boraas Energi och Miljoe AB). The digestion produces mainly 2 by-products, biogas and high quality organic biofertilizer. Biogas is a renewable source of electrical and heat energy and subsequently digester have a promising future. Unfortunately, release of unpleasant odours is one of the problems that may limit development of the technique as odours strongly influence the level of acceptance of the neighbours. The number of complaints due to odours depends mostly, upon the degree of odour release, the weather condition and plant environment (which influence the risks for spreading out), and the tolerance of the neighbours. These parameters are strongly variable. Many processes inside the plant distributed on a large surface may contribute to odour release. Chemical emissions were studied, in this project, by extensive sampling inside the plant. Results were then evaluated regarding risk for odour releases. The goal was to suggest controls and routines to limit releases. The conditions leading to the higher risks for odour emissions were studied by performing sampling at different periods of the year and subsequently different weather conditions. At first, places for measurement were chosen together with personal of the plant. Three zones are considered to mainly contribute to the odour emissions: the landfill region, the cisterns region and the leaching lake region. Totally 13 places were studied with regard to odour and chemical emissions under 2008-2009 at different weather conditions. Some results from a previous project (2007) are also presented here. Results show that the spreading out of can be maintained to an acceptable level as long as the plant is functioning without disturbances. The early stages of the treatment of waste should be confined in locals with closed doors to avoid spreading out of odours. Through controlled

  19. Improving the training process of highly skilled bodybuilders in the preparatory period, general preparatory phase

    Directory of Open Access Journals (Sweden)

    Olexandr Tyhorskyy

    2015-10-01

    Full Text Available Purpose: to improve the method of training highly skilled bodybuilders. Material and Methods: the study involved eight highly skilled athletes, members of the team of Ukraine on bodybuilding. Results: comparative characteristics of the most commonly used methods of training process in bodybuilding. Developed and substantiated the optimal method of training highly skilled bodybuilders during the general preparatory phase of the preparatory period, which can increase body weight through muscle athletes component. Conclusions: dynamic load factor to raise the intensity of training loads allows orientation help to increase volumes shoulder muscles

  20. Improving the training process of highly skilled bodybuilders in the preparatory period, general preparatory phase

    Directory of Open Access Journals (Sweden)

    Olexandr Tyhorskyy

    2015-08-01

    Full Text Available Purpose: to improve the method of training highly skilled bodybuilders during the general preparatory phase. Material and Methods: the study involved eight highly skilled athletes, members of the team of Ukraine on bodybuilding. Results: comparative characteristics of the most commonly used methods of training process in bodybuilding. Developed and substantiated the optimal method of training highly skilled bodybuilders during the general preparatory phase of the preparatory period, which can increase body weight through muscle athletes component. Conclusions: based on studies, recommended the optimum method of training highly skilled bodybuilders depending on mezotsykles and microcycles general preparatory phase

  1. Surface-reconstructed Cu Electrode via a Facile Electrochemical Anodization-Reduction Process for Low Overpotential CO 2 reduction

    KAUST Repository

    Min, Shixiong

    2017-03-21

    A high-surface-area Cu electrode, fabricated by a simple electrochemical anodization-reduction method, exhibits high activity and selectivity for CO2 reduction at low overpotential in 0.1 M KHCO3 solution. A faradaic efficiency of 37% for HCOOH and 27% for CO production was achieved with the current density of 1.5 mA cm-2 at −0.64 V vs. RHE, much higher than that of polycrystalline Cu. The enhanced catalytic performance is a result of the formation of the high electrochemical active surface area and high density of preferred low-index facets.

  2. APPLICATION OF THE CP METHODOLOGY IN REDUCTION OF WASTE IN THE PROCESSING OF TOBACCO COMPANIES

    Directory of Open Access Journals (Sweden)

    André Luiz Emmel Silva

    2015-01-01

    Full Text Available The production, marketing and processing of tobacco are the base of the municipalities of Vale do Rio Pardo / RS economy. Although it is the raw material for various products, this region is intended almost exclusively for the production of cigarettes. Dominated by a few large multinational, this market moves this imposing financial values, where tobacco is much of the cost of production. Thus, this paper seeks to prove the efficiency of the methodology application Cleaner Production (CP in tobacco waste reduction within the tobacco processing and cigarette manufacturing companies. This analysis was conducted as a case study, carrying out visits to the knowledge production process, identifying the points of waste, taking measurements and developing a set of measures to be taken to minimize these losses. The Cleaner Production method was chosen because it is a relatively new concept and it has shown good results in companies where it is located. Through the measurements, the main points of breaks were identified and then an analysis was performed by applying the concepts of CP, and a set of measures has been proposed to reduce losses. As a result, it was achieved a reduction of 83% in the rate of tobacco waste in the production process. It was concluded that the CP, within the tobacco processing industry, was efficient, impacting directly on production costs, rationalizing the use of raw materials and reducing the total volume of waste generated.

  3. Process industry energy retrofits: the importance of emission baselines for greenhouse gas reductions

    International Nuclear Information System (INIS)

    Aadahl, Anders; Harvey, Simon; Berntsson, Thore

    2004-01-01

    Fuel combustion for heat and/or electric power production is often the largest contributor of greenhouse gas (GHG) emissions from an industrial process plant. Economically feasible options to reduce these emissions include fuel switching and retrofitting the plant's energy system. Process integration methods and tools can be used to evaluate potential retrofit measures. For assessing the GHG emissions reduction potential for the measures considered, it is also necessary to define appropriate GHG emission baselines. This paper presents a systematic GHG emission calculation method for retrofit situations including improved heat exchange, integration of combined heat and power (CHP) units, and combinations of both. The proposed method is applied to five different industrial processes in order to compare the impact of process specific parameters and energy market specific parameters. For potential GHG emission reductions the results from the applied study reveal that electricity grid emissions are significantly more important than differences between individual processes. Based on the results of the study, it is suggested that for sustainable investment decision considerations a conservative emission baseline is most appropriate. Even so, new industrial CHP in the Northern European energy market could play a significant role in the common effort to decrease GHG emissions

  4. The quest for process operations variability reduction in manufacturing firms in South Africa

    Directory of Open Access Journals (Sweden)

    Madi Katombe

    2016-09-01

    Full Text Available In an era characterised by a volatile economy, intense competition, and rising energy and material costs, improving operational efficiency has become a necessity for margin purposes and long-term business success. This research study attempts to develop a model for process operations variability reduction that integrates the fundamental drivers, the intermediate measures and the four traditional competitive capabilities: quality, cost, delivery reliability and speed of delivery. In addition, it highlights the precise mechanisms in plants that lead to multiple competitive capabilities development. The concept of a routine-based approach to capabilities development provides a nexus between the earlier actions by the organisation and competitive advantage. Using longitudinal data from the Manufacturing Circle of South Africa, a statistical analysis was conducted to support the model, and path analysis models were developed which confirmed that the performance frontier is really a surface that spans many different dimensions. It is observed that the model clearly outlines pathways to process operations variability reduction through better execution of the routines concerned with maintaining the performance by current processes, improving existing processes, and transforming or changing to new processes.

  5. Epistemic evaluation of the training and managerial competence development process

    Directory of Open Access Journals (Sweden)

    Evelio F. Machado

    2015-12-01

    Full Text Available This article presents the problem of defining the concept of “competence”, due to it being an integral and complex term that has been applied in many domains as well as in a more general sense for everyday life. However, no doubt, a competence can only be tested and valuated in the practice, and it is a person who becomes competent in a context for a certain function. This is why there are many different conceptions in the literature regarding this issue; it’s a consequence of its imprecise, variable character. However, the position profiles (mainly in educational entities and the acceptation/graduation profiles are being more and more frequently established in terms of competences. This paper intends to check what has been valuated and written about the managerial competences training and development regarding the educational field, in order to obtain conclusions regarding its dimension in the school level.

  6. Alkali-aided enzymatic viscosity reduction of sugar beet mash for novel bioethanol production process

    International Nuclear Information System (INIS)

    Srichuwong, Sathaporn; Arakane, Mitsuhiro; Fujiwara, Maki; Zhang, Zilian; Takahashi, Hiroyuki; Tokuyasu, Ken

    2010-01-01

    Ethanol fermentation of fresh sugar beet mash (SBM) could give a benefit on reducing energy input for sugar diffusion, juice separation, and water evaporation as used in conventional practices, thus offering promise as a low energy process. Actions of cell-wall degrading enzymes provide a mash with low viscosity, which can be easily fermented to ethanol. However, a several-fold higher enzyme loading was required for viscosity reduction of SBM compared with that of potato mash. In this study, the use of dilute alkali treatment (0.025-0.15 N NaOH, 25 o C, 1 h) in enhancing enzymatic viscosity reduction of SBM was evaluated. The results showed that higher NaOH concentration enhanced demethylation and deacetylation of SBM, resulting in greater performances of the enzymes on reducing viscosity. Efficient enzymatic viscosity reduction of SBM was observed with the 0.1 N NaOH treatment. On the other hand, untreated SBM was highly resistant to viscosity reduction, even though a 20-fold more enzyme loading was used. The resulting mash containing 12-13% (w/v) sucrose yielded 7-8% (v/v) ethanol after 24 h of fermentation (90% efficiency). Accordingly, alkali treatment can be applied for facilitating the use of fresh sugar beet for ethanol production.

  7. Questionnaire survey on the process of specialty training in neurology in Japan.

    Science.gov (United States)

    Sonoo, Masahiro; Nishiyama, Kazutoshi; Ando, Tetsuo; Shindo, Katsuro; Kanda, Takashi; Aoki, Masashi; Kamei, Satoshi; Kikuchi, Seiji; Kusunoki, Susumu; Suzuki, Norihiro; Sobue, Gen; Nakashima, Kenji; Hara, Hideo; Hirata, Koichi; Mizusawa, Hidehiro; Murai, Hiroyuki; Murata, Miho; Mochizuki, Hideki; Takahashi, Ryosuke; Kira, Jun-Ichi

    2017-07-29

    Documentation of the current status of specialty training to become a neurologist in Japan would represent an important basis for constructing better neurology training program in the planned reform of the specialty training system in Japan. The committee for future neurology specialty system of Japanese Society of Neurology (JSN) conducted a questionnaire survey on the process of specialty training of each trainee for neurology in board-certified educational facilities and semi-educational facilities throughout Japan. The response rate was 46.2% in all facilities and 87.5% in medical universities. The training process of 905 trainees over 5 grades was clarified, which was estimated to be about 80% of all the relevant subjects. Specialty training dedicated to neurology was started at the 3rd year of residency in 87.8% of subjects. During the 3 years following junior residency, 51.3% of subjects ran the rotation training between university and city hospital, whereas 36.5% was trained within the same institution throughout the 3 years of training period.

  8. Determination of uranium and plutonium in metal conversion products from electrolytic reduction process

    International Nuclear Information System (INIS)

    Lee, Chang Heon; Suh, Moo Yul; Joe, Kih Soo; Sohn, Se Chul; Jee, Kwang Young; Kim, Won Ho

    2005-01-01

    Chemical characterization of process materials is required for the optimization of an electrolytic reduction process in which uranium dioxide, a matrix of spent PWR fuels, is electrolytically reduced to uranium metal in a medium of LiCl-Li 2 O molten at 650 .deg. C. A study on the determination of fissile materials in the uranium metal products containing corrosion products, fission products and residual process materials has been performed by controlled-potential coulometric titration which is well known in the field of nuclear science and technology. Interference of Fe, Ni, Cr and Mg (corrosion products), Nd (fission product) and LiCl molten salt (residual process material) on the determination of uranium and plutonium, and the necessity of plutonium separation prior to the titration are discussed in detail. Under the analytical condition established already, their recovery yields are evaluated along with analytical reliability

  9. Crossfit training in the process of preparation of the motorized athletes

    Directory of Open Access Journals (Sweden)

    Krzysztof Byzdra

    2017-08-01

    Full Text Available The work describes the impact of crossfit training on the level of motor skills of athletes, practicing individual and team disciplines. In the first chapter, I analyzed the progress of each component of human efficiency. I presented how you can use them in your sport. The next chapter contains a description of the use of specific crossfit training exercises in the process of motor preparation of athletes and their impact on the achieved sports results. Also i have included  a chapter on the possibilities of self-accelerating regeneration after training and optimization of the biomechanical conditions of the athlete's body, which gives mobility training. The third chapter contains information about programming and periodisation of trainings, taking into account the individual needs of the athlete and the part of the season in which I am currently. The applications are full of concise information about the benefits of this training, but also about the possible dangers of its practice.

  10. Effects of a process-based cognitive training intervention for patients with stress-related exhaustion.

    Science.gov (United States)

    Gavelin, Hanna Malmberg; Boraxbekk, Carl-Johan; Stenlund, Therese; Järvholm, Lisbeth Slunga; Neely, Anna Stigsdotter

    2015-01-01

    Stress-related exhaustion has been linked to a pattern of selective cognitive impairments, mainly affecting executive functioning, attention and episodic memory. Little is known about potential treatments of these cognitive deficits. The purpose of this study was to evaluate the effects of a process-based cognitive training intervention, designed to target the specific cognitive impairments associated with stress-related exhaustion. To this end, patients diagnosed with exhaustion disorder (ED) were randomized to either a multimodal stress rehabilitation program with the addition of a process-based cognitive training intervention (training group, n = 27) or a treatment-as-usual control condition, consisting of multimodal stress rehabilitation with no additional training (control group, n = 32). Treatment effects were evaluated through an extensive cognitive test battery, assessing both near and far transfer effects, as well as self-report forms regarding subjective cognitive complaints and burnout levels. Results showed pronounced training-related improvements on the criterion updating task (p effects to updating (p = 0.01) and episodic memory (p = 0.04). Also, the trained group reported less subjective memory complaints (p = 0.02) and levels of burnout decreased for both groups, but more so for the trained group (p = 0.04), following the intervention. These findings suggest that process-based cognitive training may be a viable method to address the cognitive impairments associated with ED.

  11. The impact of training process on the stress tests results of women cross country skiing representation.

    OpenAIRE

    Fusková, Dana

    2015-01-01

    Title: The impact of training process on the stress tests results of women cross country skiing representation. Aim: The aim of this thesis is the comparison of the results of stress tests carried out preparatory period before and after the preparation period and whether the results were influenced by the applied training process. Methods: In this thesis was used background research of professional publications, content analyzes of documents and comparison of the results of stress tests and c...

  12. The Effect of Working Memory Training on Auditory Stream Segregation in Auditory Processing Disorders Children

    OpenAIRE

    Abdollah Moossavi; Saeideh Mehrkian; Yones Lotfi; Soghrat Faghih zadeh; Hamed Adjedi

    2015-01-01

    Objectives: This study investigated the efficacy of working memory training for improving working memory capacity and related auditory stream segregation in auditory processing disorders children. Methods: Fifteen subjects (9-11 years), clinically diagnosed with auditory processing disorder participated in this non-randomized case-controlled trial. Working memory abilities and auditory stream segregation were evaluated prior to beginning and six weeks after completing the training program...

  13. Investigating Students’ Viewpointson the Effect of Peer Groups and Sports on Education and Training Process

    Directory of Open Access Journals (Sweden)

    M AfkhamiAghda

    2015-05-01

    Conclusion: The students’ points of view showed that peer groups and sports have a very high effect on education and training process thus leading to the improvement of social relationship and increasinglearning in different groups. Therefore, strengthening the peer groups and sport teams in educational environments has a very important influence on socialization of teenagers and youth thereby facilitating the acquisition of life skills and learning process and thus the education and training development in society

  14. Simulation of multivariate stationary stochastic processes using dimension-reduction representation methods

    Science.gov (United States)

    Liu, Zhangjun; Liu, Zenghui; Peng, Yongbo

    2018-03-01

    In view of the Fourier-Stieltjes integral formula of multivariate stationary stochastic processes, a unified formulation accommodating spectral representation method (SRM) and proper orthogonal decomposition (POD) is deduced. By introducing random functions as constraints correlating the orthogonal random variables involved in the unified formulation, the dimension-reduction spectral representation method (DR-SRM) and the dimension-reduction proper orthogonal decomposition (DR-POD) are addressed. The proposed schemes are capable of representing the multivariate stationary stochastic process with a few elementary random variables, bypassing the challenges of high-dimensional random variables inherent in the conventional Monte Carlo methods. In order to accelerate the numerical simulation, the technique of Fast Fourier Transform (FFT) is integrated with the proposed schemes. For illustrative purposes, the simulation of horizontal wind velocity field along the deck of a large-span bridge is proceeded using the proposed methods containing 2 and 3 elementary random variables. Numerical simulation reveals the usefulness of the dimension-reduction representation methods.

  15. Thermodynamic analysis of the reduction process of Colombian lateritic nickel ore

    International Nuclear Information System (INIS)

    Diaz, S. C.; Garces, A.; Restrepo, O. J.; Lara, M. A.; Camporredondo, J. E.

    2015-01-01

    The Colombian nickeliferous laterites are minerals used for the nickel extraction by hydrometallurgical and pyrometallurgical processes. In this work the thermodynamic behaviour of three Colombian lateritic mineral samples are described, with contents of 1.42%, 1.78% y 2.04% of nickel, when they are subjected to the calcination and reduction processes. The mineral was characterized using X Rays Diffraction and X Rays Fluorescence, giving evidence of the presence of mineralogical species such as nepouite (Ni 3 Si 2 O 5 (OH) 4 ), goethite (Fe 2 O 3 .H 2 O), silica (SiO 2 ), antigorite (Mg 3 Si 2 O 5 (OH) 4 ) and fosferite (Mg 2 SiO 4 ). The thermodynamic analysis was conducted using the software HSC Chemistry for Windows 5.1 and was focused in the quantitative determination of the chemical evolution of the mixture of these minerals with variable quantities of coal, in function of temperature. The results produced by the program showed, in the equilibrium, the feasibility of complete reduction of the nickel, and additionally, a considerable high percentage of reduction of iron oxides (up to 99%) using ratio C/O .1 at temperatures close to 1100 degree centigrade. (Author)

  16. Compensation for the signal processing characteristics of ultrasound B-mode scanners in adaptive speckle reduction.

    Science.gov (United States)

    Crawford, D C; Bell, D S; Bamber, J C

    1993-01-01

    A systematic method to compensate for nonlinear amplification of individual ultrasound B-scanners has been investigated in order to optimise performance of an adaptive speckle reduction (ASR) filter for a wide range of clinical ultrasonic imaging equipment. Three potential methods have been investigated: (1) a method involving an appropriate selection of the speckle recognition feature was successful when the scanner signal processing executes simple logarithmic compressions; (2) an inverse transform (decompression) of the B-mode image was effective in correcting for the measured characteristics of image data compression when the algorithm was implemented in full floating point arithmetic; (3) characterising the behaviour of the statistical speckle recognition feature under conditions of speckle noise was found to be the method of choice for implementation of the adaptive speckle reduction algorithm in limited precision integer arithmetic. In this example, the statistical features of variance and mean were investigated. The third method may be implemented on commercially available fast image processing hardware and is also better suited for transfer into dedicated hardware to facilitate real-time adaptive speckle reduction. A systematic method is described for obtaining ASR calibration data from B-mode images of a speckle producing phantom.

  17. Effect of different processing stages of commercial fruit leather on patulin reduction

    Directory of Open Access Journals (Sweden)

    M.H Eskandari

    2014-11-01

    Full Text Available Fruit leather (Lavashak is a high consumption food product especially among children in Iran. This product is being manufactured by low quality fruits that usually are contaminated with molds and patulin mycotoxin.  The objective of this study was to determine the effect of industrial processing stages of leather production (including pre-heating, filtration, evaporation, formulation and final heat boiling and drying on reduction of patulin level. Samples were taken for analysis prior and following each processing steps and patulin level was determined using HPLC technique. The results indicated that the maximum reduction of patulin level was ooccurred during formulation and evaporation steps which was estimated at 24.60 and 18.20%, respectively. Meanwhilewhile after drying, filtration, and pre-heating processes, the main loss of patulin was 8.58, 3.82 and 2.48%, respectively. It was concluded that the amount of residual patulin in final product was higher than 40% of its primary concentration. Besides, various processing stages were found insufficient to eliminate all of patulin or to reduce its level to lower than the maximum acceptable limit.

  18. Nanostructured p-Type Semiconductor Electrodes and Photoelectrochemistry of Their Reduction Processes

    Directory of Open Access Journals (Sweden)

    Matteo Bonomo

    2016-05-01

    Full Text Available This review reports the properties of p-type semiconductors with nanostructured features employed as photocathodes in photoelectrochemical cells (PECs. Light absorption is crucial for the activation of the reduction processes occurring at the p-type electrode either in the pristine or in a modified/sensitized state. Beside thermodynamics, the kinetics of the electron transfer (ET process from photocathode to a redox shuttle in the oxidized form are also crucial since the flow of electrons will take place correctly if the ET rate will overcome that one of recombination and trapping events which impede the charge separation produced by the absorption of light. Depending on the nature of the chromophore, i.e., if the semiconductor itself or the chemisorbed dye-sensitizer, different energy levels will be involved in the cathodic ET process. An analysis of the general properties and requirements of electrodic materials of p-type for being efficient photoelectrocatalysts of reduction processes in dye-sensitized solar cells (DSC will be given. The working principle of p-type DSCs will be described and extended to other p-type PECs conceived and developed for the conversion of the solar radiation into chemical products of energetic/chemical interest like non fossil fuels or derivatives of carbon dioxide.

  19. Cost reductions of fuel cells for transport applications: fuel processing options

    Energy Technology Data Exchange (ETDEWEB)

    Teagan, W P; Bentley, J; Barnett, B [Arthur D. Little, Inc., Cambridge, MA (United States)

    1998-03-15

    The highly favorable efficiency/environmental characteristics of fuel cell technologies have now been verified by virtue of recent and ongoing field experience. The key issue regarding the timing and extent of fuel cell commercialization is the ability to reduce costs to acceptable levels in both stationary and transport applications. It is increasingly recognized that the fuel processing subsystem can have a major impact on overall system costs, particularly as ongoing R and D efforts result in reduction of the basic cost structure of stacks which currently dominate system costs. The fuel processing subsystem for polymer electrolyte membrane fuel cell (PEMFC) technology, which is the focus of transport applications, includes the reformer, shift reactors, and means for CO reduction. In addition to low cost, transport applications require a fuel processor that is compact and can start rapidly. This paper describes the impact of factors such as fuel choice operating temperature, material selection, catalyst requirements, and controls on the cost of fuel processing systems. There are fuel processor technology paths which manufacturing cost analyses indicate are consistent with fuel processor subsystem costs of under $150/kW in stationary applications and $30/kW in transport applications. As such, the costs of mature fuel processing subsystem technologies should be consistent with their use in commercially viable fuel cell systems in both application categories. (orig.)

  20. Process integration for biological sulfate reduction in a carbon monoxide fed packed bed reactor.

    Science.gov (United States)

    Kumar, Manoj; Sinharoy, Arindam; Pakshirajan, Kannan

    2018-05-09

    This study examined immobilized anaerobic biomass for sulfate reduction using carbon monoxide (CO) as the sole carbon source under batch and continuous fed conditions. The immobilized bacteria with beads made of 10% polyvinyl alcohol (PVA) showed best results in terms of sulfate reduction (84 ± 3.52%) and CO utilization (98 ± 1.67%). The effect of hydraulic retention time (HRT), sulfate loading rate and CO loading rate on sulfate and CO removal was investigated employing a 1L packed bed bioreactor containing the immobilized biomass. At 48, 24 and 12 h HRT, the sulfate removal was 94.42 ± 0.15%, 89.75 ± 0.47% and 61.08 ± 0.34%, respectively, along with a CO utilization of more than 90%. The analysis of variance (ANOVA) of the results obtained showed that only the initial CO concentration significantly affected the sulfate reduction process. The reactor effluent sulfate concentrations were 27.41 ± 0.44, 59.16 ± 1.08, 315.83 ± 7.33 mg/L for 250, 500 and 1000 mg/L of influent sulfate concentrations respectively, under the optimum operating conditions. The sulfate reduction rates matched well with low inlet sulfate loading rates, indicating stable performance of the bioreactor system. Overall, this study yielded very high sulfate reduction efficiency by the immobilized anaerobic biomass under high CO loading condition using the packed bed reactor system. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. Development of Head-end Pyrochemical Reduction Process for Advanced Oxide Fuels

    International Nuclear Information System (INIS)

    Park, B. H.; Seo, C. S.; Hur, J. M.; Jeong, S. M.; Hong, S. S.; Choi, I. K.; Choung, W. M.; Kwon, K. C.; Lee, I. W.

    2008-12-01

    The development of an electrolytic reduction technology for spent fuels in the form of oxide is of essence to introduce LWR SFs to a pyroprocessing. In this research, the technology was investigated to scale a reactor up, the electrochemical behaviors of FPs were studied to understand the process and a reaction rate data by using U 3 O 8 was obtained with a bench scale reactor. In a scale of 20 kgHM/batch reactor, U 3 O 8 and Simfuel were successfully reduced into metals. Electrochemical characteristics of LiBr, LiI and Li 2 Se were measured in a bench scale reactor and an electrolytic reduction cell was modeled by a computational tool

  2. Development of Head-end Pyrochemical Reduction Process for Advanced Oxide Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Park, B. H.; Seo, C. S.; Hur, J. M.; Jeong, S. M.; Hong, S. S.; Choi, I. K.; Choung, W. M.; Kwon, K. C.; Lee, I. W. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-12-15

    The development of an electrolytic reduction technology for spent fuels in the form of oxide is of essence to introduce LWR SFs to a pyroprocessing. In this research, the technology was investigated to scale a reactor up, the electrochemical behaviors of FPs were studied to understand the process and a reaction rate data by using U{sub 3}O{sub 8} was obtained with a bench scale reactor. In a scale of 20 kgHM/batch reactor, U{sub 3}O{sub 8} and Simfuel were successfully reduced into metals. Electrochemical characteristics of LiBr, LiI and Li{sub 2}Se were measured in a bench scale reactor and an electrolytic reduction cell was modeled by a computational tool.

  3. Explaining the reductions in US corn ethanol processing costs: Testing competing hypotheses

    International Nuclear Information System (INIS)

    Chen Xiaoguang; Khanna, Madhu

    2012-01-01

    The processing costs of US corn ethanol have declined by 45% since 1983 as production volumes have increased seventeen-fold. We investigate the role of various factors that could explain this, including economies of scale, cumulative experience, induced innovation in response to rising input prices, an autonomous technological change, and trade induced competition from imported ethanol. Using data on dry-mill ethanol processing costs over the 1983–2005 period, we find evidence to show that US corn ethanol production exhibited decreasing returns to scale, that learning by doing played an important role in reducing these processing costs with a learning rate of 0.25, and that sugarcane ethanol imports contributed to making the corn ethanol industry more competitive. Other factors such as the rising prices of energy and labor did induce lower processing costs, but the effect is not statistically significant. The inclusion of these competing explanations for the reduction in processing costs of US corn ethanol lead to a significantly higher learning rate than otherwise, and this learning rate is found to be robust across specifications. - Highlights: ► We investigate the role of various factors that could explain the reduction in US corn ethanol processing costs over the period 1983–2005. ► We find that US corn ethanol production exhibited decreasing returns to scale. ► Learning by doing played an important role in reducing these costs with a learning rate of 0.25. ► Sugarcane ethanol imports contributed to making the corn ethanol industry more competitive. ► Rising prices of energy and labor did induce lower processing costs, but the effect is not statistically significant.

  4. Interim glycol flowsheet reduction/oxidation (redox) model for the Defense Waste Processing Facility (DWPF)

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Williams, M. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Zamecnik, J. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Missimer, D. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-08

    Control of the REDuction/OXidation (REDOX) state of glasses containing high concentrations of transition metals, such as High Level Waste (HLW) glasses, is critical in order to eliminate processing difficulties caused by overly reduced or overly oxidized melts. Operation of a HLW melter at Fe+2/ΣFe ratios of between 0.09 and 0.33, a range which is not overly oxidizing or overly reducing, helps retain radionuclides in the melt, i.e. long-lived radioactive 99Tc species in the less volatile reduced Tc4+ state, 104Ru in the melt as reduced Ru+4 state as insoluble RuO2, and hazardous volatile Cr6+ in the less soluble and less volatile Cr+3 state in the glass. The melter REDOX control balances the oxidants and reductants from the feed and from processing additives such as antifoam. Currently, the Defense Waste Processing Facility (DWPF) is running a formic acid-nitric acid (FN) flowsheet where formic acid is the main reductant and nitric acid is the main oxidant. During decomposition formate and formic acid releases H2 gas which requires close control of the melter vapor space flammability. A switch to a nitric acid-glycolic acid (GN) flowsheet is desired as the glycolic acid flowsheet releases considerably less H2 gas upon decomposition. This would greatly simplify DWPF processing. Development of an EE term for glycolic acid in the GN flowsheet is documented in this study.

  5. The investigation of the FM heavy forging process by the Moiré method. Part II: Consecutive reduction results

    NARCIS (Netherlands)

    Wang, S.L.; Cao, Q.X.

    1994-01-01

    In part I of this work (preceding paper), single-reduction results on the FM forging process were reported. In the work reported in this paper, the cavity closing laws of the consecutive reduction process were investigated, the appropriate turn-over and feed procedure being obtained, along with the

  6. Reduction of Ochratoxin A in Oat Flakes by Twin-Screw Extrusion Processing.

    Science.gov (United States)

    Lee, Hyun Jung; Dahal, Samjhana; Perez, Enrique Garcia; Kowalski, Ryan Joseph; Ganjyal, Girish M; Ryu, Dojin

    2017-10-01

    Ochratoxin A (OTA) is one of the most important mycotoxins owing to its widespread occurrence and toxicity, including nephrotoxicity and potential carcinogenicity to humans. OTA has been detected in a wide range of agricultural commodities, including cereal grains and their processed products. In particular, oat-based products show a higher incidence and level of contamination. Extrusion cooking is widely used in the manufacturing of breakfast cereals and snacks and may reduce mycotoxins to varying degrees. Hence, the effects of extrusion cooking on the stability of OTA in spiked (100 μg/kg) oat flake was investigated by using a laboratory-scale twin-screw extruder with a central composite design. Factors examined were moisture content (20, 25, and 30% dry weight basis), temperature (140, 160, and 180°C), screw speed (150, 200, and 250 rpm), and die size (1.5, 2, and 3 mm). Both nonextruded and extruded samples were analyzed for reductions of OTA by high-performance liquid chromatography, coupled with fluorescence detection. The percentage of reductions in OTA in the contaminated oat flakes upon extrusion processing were in the range of 0 to 28%. OTA was partially stable during extrusion, with only screw speed and die size having significant effect on reduction (P < 0.005). The highest reduction of 28% was achieved at 180°C, 20% moisture, 250 rpm screw speed, and a 3-mm die with 193 kJ/kg specific mechanical energy. According to the central composite design analyses, up to 28% of OTA can be reduced by a combination of 162°C, 30% moisture, and 221 rpm, with a 3-mm die.

  7. Recharge processes drive sulfate reduction in an alluvial aquifer contaminated with landfill leachate

    Science.gov (United States)

    Scholl, M.A.; Cozzarelli, I.M.; Christenson, S.C.

    2006-01-01

    present in the root zone, and SO42- reduction may be coupled to methane oxidation. The results show that sulfur (and possibly nitrogen) redox processes within the top 2??m of the aquifer are directly related to recharge timing and seasonal water level changes in the aquifer. The results suggest that SO42- reduction associated with the infiltration of recharge may be a significant factor affecting natural attenuation of contaminants in alluvial aquifers. ?? 2006 Elsevier B.V. All rights reserved.

  8. Recharge processes drive sulfate reduction in an alluvial aquifer contaminated with landfill leachate.

    Science.gov (United States)

    Scholl, Martha A; Cozzarelli, Isabelle M; Christenson, Scott C

    2006-08-10

    site. Organic compounds more labile than the leachate NVDOC may be present in the root zone, and SO(4)(2-) reduction may be coupled to methane oxidation. The results show that sulfur (and possibly nitrogen) redox processes within the top 2 m of the aquifer are directly related to recharge timing and seasonal water level changes in the aquifer. The results suggest that SO(4)(2-) reduction associated with the infiltration of recharge may be a significant factor affecting natural attenuation of contaminants in alluvial aquifers.

  9. Reduction of antibiotic resistance genes in municipal wastewater effluent by advanced oxidation processes

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yingying; Zhuang, Yao; Geng, Jinju, E-mail: jjgeng@nju.edu.cn; Ren, Hongqiang; Xu, Ke; Ding, Lili

    2016-04-15

    This study investigated the reduction of antibiotic resistance genes (ARGs), intI1 and 16S rRNA genes, by advanced oxidation processes (AOPs), namely Fenton oxidation (Fe{sup 2+}/H{sub 2}O{sub 2}) and UV/H{sub 2}O{sub 2} process. The ARGs include sul1, tetX, and tetG from municipal wastewater effluent. The results indicated that the Fenton oxidation and UV/H{sub 2}O{sub 2} process could reduce selected ARGs effectively. Oxidation by the Fenton process was slightly better than that of the UV/H{sub 2}O{sub 2} method. Particularly, for the Fenton oxidation, under the optimal condition wherein Fe{sup 2+}/H{sub 2}O{sub 2} had a molar ratio of 0.1 and a H{sub 2}O{sub 2} concentration of 0.01 mol L{sup −1} with a pH of 3.0 and reaction time of 2 h, 2.58–3.79 logs of target genes were removed. Under the initial effluent pH condition (pH = 7.0), the removal was 2.26–3.35 logs. For the UV/H{sub 2}O{sub 2} process, when the pH was 3.5 with a H{sub 2}O{sub 2} concentration of 0.01 mol L{sup −1} accompanied by 30 min of UV irradiation, all ARGs could achieve a reduction of 2.8–3.5 logs, and 1.55–2.32 logs at a pH of 7.0. The Fenton oxidation and UV/H{sub 2}O{sub 2} process followed the first-order reaction kinetic model. The removal of target genes was affected by many parameters, including initial Fe{sup 2+}/H{sub 2}O{sub 2} molar ratios, H{sub 2}O{sub 2} concentration, solution pH, and reaction time. Among these factors, reagent concentrations and pH values are the most important factors during AOPs. - Highlights: • AOPs including Fenton oxidation and UV/H{sub 2}O{sub 2} process could reduce ARGs effectively. • Fenton oxidation is slightly more effective than UV/H{sub 2}O{sub 2} process in ARG reduction. • Removal of ARGs by AOPs follows the first-order reaction kinetic model. • Selected ARGs and 16S rRNA genes exhibit similar change trends during AOPs.

  10. Reduction of antibiotic resistance genes in municipal wastewater effluent by advanced oxidation processes

    International Nuclear Information System (INIS)

    Zhang, Yingying; Zhuang, Yao; Geng, Jinju; Ren, Hongqiang; Xu, Ke; Ding, Lili

    2016-01-01

    This study investigated the reduction of antibiotic resistance genes (ARGs), intI1 and 16S rRNA genes, by advanced oxidation processes (AOPs), namely Fenton oxidation (Fe"2"+/H_2O_2) and UV/H_2O_2 process. The ARGs include sul1, tetX, and tetG from municipal wastewater effluent. The results indicated that the Fenton oxidation and UV/H_2O_2 process could reduce selected ARGs effectively. Oxidation by the Fenton process was slightly better than that of the UV/H_2O_2 method. Particularly, for the Fenton oxidation, under the optimal condition wherein Fe"2"+/H_2O_2 had a molar ratio of 0.1 and a H_2O_2 concentration of 0.01 mol L"−"1 with a pH of 3.0 and reaction time of 2 h, 2.58–3.79 logs of target genes were removed. Under the initial effluent pH condition (pH = 7.0), the removal was 2.26–3.35 logs. For the UV/H_2O_2 process, when the pH was 3.5 with a H_2O_2 concentration of 0.01 mol L"−"1 accompanied by 30 min of UV irradiation, all ARGs could achieve a reduction of 2.8–3.5 logs, and 1.55–2.32 logs at a pH of 7.0. The Fenton oxidation and UV/H_2O_2 process followed the first-order reaction kinetic model. The removal of target genes was affected by many parameters, including initial Fe"2"+/H_2O_2 molar ratios, H_2O_2 concentration, solution pH, and reaction time. Among these factors, reagent concentrations and pH values are the most important factors during AOPs. - Highlights: • AOPs including Fenton oxidation and UV/H_2O_2 process could reduce ARGs effectively. • Fenton oxidation is slightly more effective than UV/H_2O_2 process in ARG reduction. • Removal of ARGs by AOPs follows the first-order reaction kinetic model. • Selected ARGs and 16S rRNA genes exhibit similar change trends during AOPs.

  11. Geology for Global Development: Training young geoscientists to communicate and do effective disaster risk reduction in the developing world

    Science.gov (United States)

    Gill, J. C.

    2012-04-01

    Geoscientists have a crucial role to play in improving disaster risk reduction and supporting communities to build resilience and reduce vulnerability. Across the world millions live in severe poverty, without access to many of the basic needs that are often taken for granted - a clean water supply, a reliable food source, safe shelter and suitable infrastructure. This lack of basic needs results in communities being particularly vulnerable to devastating natural hazards, such as floods, earthquakes, volcanic eruptions and landslides. Here we discuss two major gaps which can limit the engagement of geoscience students and recent graduates in the serious debates surrounding resilience and effective disaster risk reduction: (i) Geoscience undergraduate and postgraduate courses rarely give students the opportunity to engage with issues such as vulnerability, sustainability, knowledge exchange and cross-cultural communication. (ii) There are very few opportunities for geoscience students to gain experience in this sector through UK or overseas placements. Geology for Global Development (GfGD), established in 2011, is starting to work with UK students and recent graduates to fill these gaps. GfGD aims to inspire and engage young geoscientists, supporting them to apply their interdisciplinary knowledge and skills to generate solutions and resources which support NGOs, empower communities and help build resilience to natural hazards. This is being and will be done through: (i) active university groups hosting seminars and discussion groups; (ii) blog articles; (iii) opportunities to contribute to technical papers; (iv) workshops and conferences; and (v) UK and overseas placements. GfGD seeks to play a key role in the training and development of geoscience graduates with the necessary 'soft-skills' and opportunities to make an important contribution to improving disaster risk reduction, fighting poverty and improving people's lives.

  12. Design and operation of a remotely operated plutonium waste size reduction and material handling process

    International Nuclear Information System (INIS)

    Stewart, J.A. III; Charlesworth, D.L.

    1986-01-01

    Noncombustible 238 Pu and 239 Pu waste is generated as a result of normal operation and decommissioning activity at the Savannah River Plant, and is being retrievably stored there. As part of the long-term plant to process the stored waste and current waste for permanent disposal, a remote size reduction and material handling process is being cold-tested at Savannah River Laboratory. The process consists of a large, low-speed shredder and material handling system, a remote worktable, a bagless transfer system, and a robotically controlled manipulator. Initial testing of the shredder and material handling system and a cycle test of the bagless transfer system has been completed. Fabrication and acceptance testing of the Telerobat, a robotically controlled manipulator has been completed. Testing is scheduled to begin in 3/86. Design features maximizing the ability to remotely maintain the equipment were incorporated. Complete cold-testing of the equipment is scheduled to be completed in 1987

  13. Vitrification process for the volume reduction and stabilization of organic resins

    International Nuclear Information System (INIS)

    Buelt, J.L.

    1982-10-01

    Pacific Northwest Laboratory has completed a series of experimental tests sponsored by the US Department of Energy (DOE) to determine the feasibility of incinerating and vitrifying organic ion-exchange resins in a single-step process. The resins used in this study were identical to those used for decontaminating auxiliary building water at the Three Mile Island (TMI) Unit 2 reactor. The primarily organic resins were loaded with nonradioactive isotopes of cesium and strontium for processing in a pilot-scale, joule-heated glass melter modified to support resin combustion. The feasibility tests demonstrated an average process rate of 3.0 kg/h. Based on this rate, if 50 organic resin liners were vitrified in a six-month campaign, a melter 2.5 times the size of the pilot scale unit would be adequate. A maximum achievable volume reduction of 91% was demonstrated in these tests

  14. Development of a fast and flexible generic process for the reduction of nitro compounds

    DEFF Research Database (Denmark)

    Haas-Santo, K.; Vankayala, B.; Dittmeyer, R.

    slurry catalyst was designed that can be adapted for reduction of a range of nitro compounds. The generic process provides the possibilities of swapping out a reactor or work up technology as required. The equipments of the generic process should be also able to operate at wider range of operational......The hydrogenation of aromatic nitro substrates is a frequently used reaction in the multi-step fabrication of active pharmaceutical ingredients (APIs). Today most pharmaceutical production processes are performed in batch mode. In the frame of the C2-campaign speed is an important factor during...... the production of a multitude of possible API’s. A generic reactor set-up able to be adapted for the transformation of a specific substrate would reduce the development time and thereby the campaign time significantly. In the frame of the EU-project F3-Factory such a flexible and continuous reaction system...

  15. The application of nursing process method in training nurses working in the department of interventional radiology

    International Nuclear Information System (INIS)

    Ni Daihui; Wang Hongjuan; Yang Yajuan; Ye Rui; Qu Juan; Li Xinying; Xu Ying

    2010-01-01

    Objective: To describe the training procedure,typical training method and the clinical effect of nursing process method which was used to cultivate nurses working in the interventional ward. Methods: According to the evaluation index, the authors made a detail assessment of each nurse and found out individually the problems which needed to be perfected, then, the practicable measures were made for each individual nurse, after the training course the clinical results were evaluated. Results: After the nurses on different technical levels were cultivated with nursing process method, the comprehensive quality of each nurse was improved in different degree, and the general nursing quality of entire Department was also markedly improved. Conclusion: By using the nursing process method the cultivating period can be effectively shortened, the possible waste of time, manpower, material and energy cause by the blind training plan can be avoided. (authors)

  16. Processing speed training increases the efficiency of attentional resource allocation in young adults

    Directory of Open Access Journals (Sweden)

    Wesley K Burge

    2013-10-01

    Full Text Available Cognitive training has been shown to improve performance on a range of tasks. However, the mechanisms underlying these improvements are still unclear. Given the wide range of transfer effects, it is likely that these effects are due to a factor common to a wide range of tasks. One such factor is a participant’s efficiency in allocating limited cognitive resources. The impact of a cognitive training program, Processing Speed Training (PST, on the allocation of resources to a set of visual tasks was measured using pupillometry in 10 young adults as compared to a control group of a 10 young adults (n = 20. PST is a well-studied computerized training program that involves identifying simultaneously presented central and peripheral stimuli. As training progresses, the task becomes increasingly more difficult, by including peripheral distracting stimuli and decreasing the duration of stimulus presentation. Analysis of baseline data confirmed that pupil diameter reflected cognitive effort. After training, participants randomized to PST used fewer attentional resources to perform complex visual tasks as compared to the control group. These pupil diameter data indicated that PST appears to increase the efficiency of attentional resource allocation. Increases in cognitive efficiency have been hypothesized to underlie improvements following experience with action video games, and improved cognitive efficiency has been hypothesized to underlie the benefits of processing speed training in older adults. These data reveal that these training schemes may share a common underlying mechanism of increasing cognitive efficiency in younger adults.

  17. Decontamination and size reduction of plutonium contaminated process exhaust ductwork and glove boxes

    International Nuclear Information System (INIS)

    LaFrate, P.; Elliott, J.; Valasquez, M.

    1996-01-01

    The Los Alamos National Laboratory (LANL) Decommissioning Program has decontaminated and demolished two filter plenum buildings at Technical Area 21 (TA-21). During the project a former hot cell was retrofitted to perform decontamination and size reduction of highly Pu contaminated process exhaust (1,100 ft) and gloveboxes. Pu-238/239 concentrations were as high a 1 Ci per linear foot and averaged approximately 1 mCi/ft. The Project decontamination objective was to reduce the plutonium contamination on surfaces below transuranic levels. If possible, metal surfaces were decontaminated further to meet Science and Ecology Group (SEG) waste classification guidelines to enable the metal to be recycled at their facility in oak Ridge, Tennessee. Project surface contamination acceptance criteria for low-level radioactive waste (LLRW), transuranic waste, and SEG waste acceptance criteria will be presented. Ninety percent of all radioactive waste for the project was characterized as LLRW. Twenty percent of this material was shipped to SEG. Process exhaust and glove boxes were brought to the project decontamination area, an old hot cell in Building 4 North. This paper focuses on process exhaust and glovebox decontamination methodology, size reduction techniques, waste characterization, airborne contamination monitoring, engineering controls, worker protection, lessons learned, and waste minimization. Decontamination objectives are discussed in detail

  18. Demonstration of a remotely operated TRU waste size-reduction and material handling process

    International Nuclear Information System (INIS)

    Stewart, J.A. III; Schuler, T.F.; Ward, C.R.

    1986-01-01

    Noncombustible Pu-238 and Pu-239 waste is generated as a result of normal operation and decommissioning activity at the Savannah River Plant and is being retrievably stored at the site. As part of the long-term plan to process the stored waste and current waste for permanent disposal, a remote size-reduction and material handling process is being tested at Savannah River Laboratory to provide design support for the plant TRU Waste Facility scheduled to be completed in 1993. The process consists of a large, low-speed shredder and material handling system, a remote worktable, a bagless transfer system, and a robotically controlled manipulator, or Telerobot. Initial testing of the shredder and material handling system and a cycle test of the bagless transfer system were completed. Initial Telerobot run-in and system evaluation was completed. User software was evaluated and modified to support complete menu-driven operation. Telerobot prototype size-reduction tooling was designed and successfully tested. Complete nonradioactive testing of the equipment is scheduled to be completed in 1987

  19. Treatment of Aqueous Bromate by Superparamagnetic BiOCl-Mediated Advanced Reduction Process

    Directory of Open Access Journals (Sweden)

    Xiaowei Liu

    2017-05-01

    Full Text Available Bromate ( BrO 3 − contamination in drinking water is a growing concern. Advanced reduction processes (ARPs are reportedly promising in relieving this concern. In this work, UV/superparamagnetic BiOCl (BiOCl loaded onto superparamagnetic hydroxyapatite assisted with small molecule carboxylic acid (formate, citrate, and acetate, a carboxyl anion radical ( CO 2 • − -based ARP, was proposed to eliminate aqueous BrO 3 − . Formate and citrate were found to be ideal CO 2 • − precursor, and the latter was found to be safe for practical use. BrO 3 − (10 μg·L−1, WHO guideline for drinking water can be completely degraded within 3 min under oxygen-free conditions. In this process, BrO 3 − degradation was realized by the reduction of CO 2 • − (major role and formyloxyl radical (minor role in bulk solution. The formation mechanism of radicals and the transformation pathway of BrO 3 − were proposed based on data on electron paramagnetic resonance monitoring, competitive kinetics, and degradation product analysis. The process provided a sustainable decontamination performance (<5% deterioration for 10 cycles and appeared to be more resistant to common electron acceptors (O2, NO 3 − , and Fe3+ than hydrated electron based-ARPs. Phosphate based-superparamagnetic hydroxyapatite, used to support BiOCl in this work, was believed to be applicable for resolving the recycling problem of other metal-containing catalyst.

  20. The benefits of executive control training and the implications for language processing

    Directory of Open Access Journals (Sweden)

    Erika K. Hussey

    2012-05-01

    Full Text Available Recent psycholinguistics research suggests that the executive function (EF skill known as conflict resolution—the ability to adjust behavior in the service of resolving among incompatible representations—is important for several language processing tasks such as lexical and syntactic ambiguity resolution, verbal fluency, and common-ground assessment. Here, we discuss work showing that various EF skills can be enhanced through consistent practice with working memory tasks that tap these EFs, and, moreover, that improvements on the training tasks transfer across domains to novel tasks that may rely on shared underlying EFs. These findings have implications for language processing and could launch new research exploring if EF training, within a process-specific framework, could be used as a remediation tool for improving general language use. Indeed, work in our lab demonstrates that EF training that increases conflict-resolution processes has selective benefits on an untrained sentence-processing task requiring syntactic ambiguity resolution, which relies on shared conflict-resolution functions. Given claims that conflict-resolution abilities contribute to a range of linguistic skills, EF training targeting this process could theoretically yield wider performance gains beyond garden-path recovery. We offer some hypotheses on the potential benefits of EF training as a component of interventions to mitigate general difficulties in language processing. However, there are caveats to consider as well, which we also address.

  1. Analysis of civilian processing programs in reduction of excess separated plutonium and high-enriched uranium

    International Nuclear Information System (INIS)

    Persiani, P.J.

    1995-01-01

    The purpose of this preliminary investigation is to explore alternatives and strategies aimed at the gradual reduction of the excess inventories of separated plutonium and high-enriched uranium (HEU) in the civilian nuclear power industry. The study attempts to establish a technical and economic basis to assist in the formation of alternative approaches consistent with nonproliferation and safeguards concerns. The analysis addresses several options in reducing the excess separated plutonium and HEU, and the consequences on nonproliferation and safeguards policy assessments resulting from the interacting synergistic effects between fuel cycle processes and isotopic signatures of nuclear materials

  2. The teacher training process through distance education: a pioneer experience

    Directory of Open Access Journals (Sweden)

    Oscar Massaru Fujita

    2016-06-01

    Full Text Available This paper presents briefly the actions conducted in the formation process and established partnerships to achieve the pioneering educational process of Distance Education (DE courses of the State University of Londrina (UEL-PR. The methodological design was developed according to the Qualitative Approach of Action-Research type that prioritizes the development and analysis of the process along with the "meaning" that people give to things and your life than actually the product itself. The data collected through questionnaires at the end of the course signal impressions (positive and constructive criticism we received and the meanings experienced teacher students (testimonials, chats, discussion forums, projects in the courses offered. The experience lived in these three courses: Virtual Learning Environment (60 hours; Tutoring in distance education (60 hours and Teaching Materials in Distance Education (60 hours, from its conception to its actual conclusion, make us think that we are on the right way and by TDIC, new horizons may open up to the institution in short- and medium-term.

  3. An environmentally-friendly vacuum reduction metallurgical process to recover germanium from coal fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Lingen; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

    2016-07-15

    Highlights: • An environmental friendly vacuum reduction metallurgical process is proposed. • Rare and valuable metal germanium from coal fly ash is recycled. • Residues are not a hazardous material and can be further recycled. • A germanium recovery ratio of 94.64% is obtained in pilot scale experiments. - Abstract: The demand for germanium in the field of semiconductor, electronics, and optical devices is growing rapidly; however, the resources of germanium are scarce worldwide. As a secondary material, coal fly ash could be further recycled to retrieve germanium. Up to now, the conventional processes to recover germanium have two problems as follows: on the one hand, it is difficult to be satisfactory for its economic and environmental effect; on the other hand, the recovery ratio of germanium is not all that could be desired. In this paper, an environmentally-friendly vacuum reduction metallurgical process (VRMP) was proposed to recover germanium from coal fly ash. The results of the laboratory scale experiments indicated that the appropriate parameters were 1173 K and 10 Pa with 10 wt% coke addition for 40 min, and recovery ratio germanium was 93.96%. On the basis of above condition, the pilot scale experiments were utilized to assess the actual effect of VRMP for recovery of germanium with parameter of 1473 K, 1–10 Pa and heating time 40 min, the recovery ratio of germanium reached 94.64%. This process considerably enhances germanium recovery, meanwhile, eliminates much of the water usage and residue secondary pollution compared with other conventional processes.

  4. Effect of process parameters and injector position on the efficiency of NOx reduction by selective non catalytic reduction technique

    International Nuclear Information System (INIS)

    Hamid, A.; Mehmood, M.A.; Irfan, N.; Javed, M.T.; Waheed, K.

    2009-01-01

    An experimental investigation has been performed to study the effect of atomizer pressure dilution of the reducing reagent and the injector position on the efficiency or the NOx reduction by a selective non-catalytic reduction technique using urea as a reducing agent. Experiments were performed with a flow reactor in which flue gas was generated by the combustion of methane in air at stoichiometric amount of oxygen and the desired levels of initial NOx (400-450 ppm) were achieved by doping the flame with ammonia. The work was directed to investigate the effect of atomizer pressure, dilution of urea reagent and the injector position. The atomizer pressure was varied from 1 to 3bar and 20-25% increase in efficiency was observed by decreasing the pressure. Effect of dilution of urea solution was investigated by varying the strength of the solution from the 8 to 32% and 40-45% increase in the efficiency was observed. Effects of injector position was investigated by injecting the urea solution both in co current and counter current direction of the flue gases and 20-25% increase in the efficiency was observed in counter current direction. (author)

  5. A study on adsorption onto TODGA resin after electrolytic reduction in ERIX process for reprocessing spent FBR-MOX fuel

    International Nuclear Information System (INIS)

    Hoshi, Harutaka; Arai, Tsuyoshi; Wei, Yuezhou; Kumagai, Mikio; Asakura, Toshihide; Morita, Yasuji

    2005-01-01

    For reprocessing spent FBR-MOX fuel, an advanced aqueous reprocessing process ''ERIX process'' has been developed. In this system, hydrazine is used as reduction holding reagent for the valance adjustment of U by electrolytic reduction in nitric acid solution. Therefore, hydrazine is contained in high level liquid waste after separation of U, Pu and Np. Effect of hydrazine on adsorption of FP onto TODGA resin was examined. When hydrazine concentration was less than 0.3 M, effect on the distribution coefficient was negligibly small. After electrolytic reduction, some elements exist as lower valence state. Ru and Tc are most difficult elements to control their behavior in aqueous process. The distribution coefficient of both Ru and Tc onto TODGA decreased after electrolytic reduction, because they are reduced to lower valence. Hence, it is difficult for Ru or Tc to diffuse to allover the process and separation of MA from Tc and Ru was enhanced by electrolytic reduction. (author)

  6. Processing speed and working memory training in multiple sclerosis: a double-blind randomized controlled pilot study.

    Science.gov (United States)

    Hancock, Laura M; Bruce, Jared M; Bruce, Amanda S; Lynch, Sharon G

    2015-01-01

    Between 40-65% of multiple sclerosis patients experience cognitive deficits, with processing speed and working memory most commonly affected. This pilot study investigated the effect of computerized cognitive training focused on improving processing speed and working memory. Participants were randomized into either an active or a sham training group and engaged in six weeks of training. The active training group improved on a measure of processing speed and attention following cognitive training, and data trended toward significance on measures of other domains. Results provide preliminary evidence that cognitive training with multiple sclerosis patients may produce moderate improvement in select areas of cognitive functioning.

  7. Methodologiacal basis of training in Physiotherapy: discussing the detachment between the training process and the work in primary health care.

    Directory of Open Access Journals (Sweden)

    Daniela Macêdo Pimentel

    2016-07-01

    Full Text Available From the methodological foundations underlying the training process in Physiotherapy and considering the tasks of the physiotherapist at Nucleus of Support for Family Health (FHSCs, attempted to identify the points of separation between training and use of the physiotherapist workforce in primary healthcare in João Pessoa/PB. The study is justified by the need to enhance educational processes in Physiotherapy, in order to be compatible with the requirements of their professional practice, particularly in primary healthcare level. This is an exploratory-descriptive and inferential study which quantitative approaches. Data were analyzed from the Hypothesis Test, used as method of decision making. The data analysis showed, with statistical evidences, distances between the students and teachers who say, in the process physiotherapist formation in higher education institutions surveyed, as well as differences between those who attest physiotherapist and managers in relation to the work process in FHSCs of Health Districts of the city. It was concluded that it is necessary a reformulation of methodological bases that make up educational plans related to Collective Health at the institutions which offer the course of graduation at Physiotherapy in João Pessoa, as well as a better use of the workforce of the physiotherapist with the FHSCs, aiming at a redefinition of the practices of this professional at the areas of Primary Health.

  8. Solar fuel processing efficiency for ceria redox cycling using alternative oxygen partial pressure reduction methods

    International Nuclear Information System (INIS)

    Lin, Meng; Haussener, Sophia

    2015-01-01

    Solar-driven non-stoichiometric thermochemical redox cycling of ceria for the conversion of solar energy into fuels shows promise in achieving high solar-to-fuel efficiency. This efficiency is significantly affected by the operating conditions, e.g. redox temperatures, reduction and oxidation pressures, solar irradiation concentration, or heat recovery effectiveness. We present a thermodynamic analysis of five redox cycle designs to investigate the effects of working conditions on the fuel production. We focused on the influence of approaches to reduce the partial pressure of oxygen in the reduction step, namely by mechanical approaches (sweep gassing or vacuum pumping), chemical approaches (chemical scavenger), and combinations thereof. The results indicated that the sweep gas schemes work more efficient at non-isothermal than isothermal conditions, and efficient gas phase heat recovery and sweep gas recycling was important to ensure efficient fuel processing. The vacuum pump scheme achieved best efficiencies at isothermal conditions, and at non-isothermal conditions heat recovery was less essential. The use of oxygen scavengers combined with sweep gas and vacuum pump schemes further increased the system efficiency. The present work can be used to predict the performance of solar-driven non-stoichiometric redox cycles and further offers quantifiable guidelines for system design and operation. - Highlights: • A thermodynamic analysis was conducted for ceria-based thermochemical cycles. • Five novel cycle designs and various operating conditions were proposed and investigated. • Pressure reduction method affects optimal operating conditions for maximized efficiency. • Chemical oxygen scavenger proves to be promising in further increasing efficiency. • Formulation of quantifiable design guidelines for economical competitive solar fuel processing

  9. Image processing methods for noise reduction in the TJ-II Thomson Scattering diagnostic

    Energy Technology Data Exchange (ETDEWEB)

    Dormido-Canto, S., E-mail: sebas@dia.uned.es [Departamento de Informatica y Automatica, UNED, Madrid 28040 (Spain); Farias, G. [Pontificia Universidad Catolica de Valparaiso, Valparaiso (Chile); Vega, J.; Pastor, I. [Asociacion EURATOM/CIEMAT para Fusion, Madrid 28040 (Spain)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer We describe an approach in order to reduce or mitigate the stray-light on the images and show the exceptional results. Black-Right-Pointing-Pointer We analyze the parameters to take account in the proposed process. Black-Right-Pointing-Pointer We report a simplified exampled in order to explain the proposed process. - Abstract: The Thomsom Scattering diagnostic of the TJ-II stellarator provides temperature and density profiles. The CCD camera acquires images corrupted with noise that, in some cases, can produce unreliable profiles. The main source of noise is the so-called stray-light. In this paper we describe an approach that allows mitigation of the effects that stray-light has on the images: extraction regions with connected-components. In addition, the robustness and effectiveness of the noise reduction technique is validated in two ways: (1) supervised classification and (2) comparison of electron temperature profiles.

  10. Process Integration Design Methods for Water Conservation and Wastewater Reduction in Industry

    DEFF Research Database (Denmark)

    Overcash, Michael; Russell, Dunn; Wenzel, Henrik

    2002-01-01

    This paper addresses operational techniques for applying mass integration design in industry with special focus on water conservation and wastewater reduction. This paper presents a design technique for any number of wastewater streams containing multiple contaminants. The technique comprises...... a single non-linear optimization program to minimize the wastewater discharged (or maximize the amount of recycled wastewater). This program is developed based on general water allocation principles and uses the transshipment model theory to allow the “shipment” of wastewater (referred to as “sources......” or “warehouses”) to process water users (referred to as “sinks”, “demands” or “customers”). A detailed case study of industrial significance, highlighting land treatment technology, is included to illustrate the proposed methodology and various process scenarios are evaluated within this case study...

  11. S O{sub 2} emission reduction through the use of the humid oxidation process

    Energy Technology Data Exchange (ETDEWEB)

    Fink, Jurgen [TIBRAS, Titanio do Brasil S.A., Salvador, BA (Brazil)

    1993-12-31

    The SO{sub 2} emission reduction unit to be installed in TIBRAS consists of six reactors supplied with activates carbon beds which will remove the SO{sub 2} (0.11 volume percent) contained in the residual gas (150.000 cubic meters per hour) produced in three rotary calciner kilns. The SO{sub 2} reacts with the water in the carbon pores forming diluted sulfuric acid. The activated carbon is fabricated from coke from peat. The weak H{sub 2} SO{sub 4} is reused in the titanium dioxide pigment process. This process is supposed to reduce TIBRAS SO{sub 2} emissions by 50 to 85 percent in addition to eliminating two stacks. 2 figs., 5 tabs.

  12. Continuous improvement process and waste reduction through a QFD tool: the case of a metallurgic plant

    Directory of Open Access Journals (Sweden)

    Leoni Pentiado Godoy

    2013-05-01

    Full Text Available This paper proposes the use of QFD for the continuous improvement of production processes and waste reduction actions. To collect the information we used the simple observation and questionnaire with closed questions applied to employees, representing 88.75% of the population that works in the production processes of an industry of metal-mechanic sector, located inRio Grandedo Sul. QFD is an effective method of quality planning, because it provides a diagnosis that underpins the definition of improvement actions aimed at combating waste. Actions were set providing improved communication between the sectors, enabling the delivery of products with specifications that meet customer requirements, on time and the right amounts, at a minimum cost and satisfaction of those involved with the company. The implementation of these actions reduces waste, minimizes the extra work, maximizes effective labor and increases profitability.

  13. S O{sub 2} emission reduction through the use of the humid oxidation process

    Energy Technology Data Exchange (ETDEWEB)

    Fink, Jurgen [TIBRAS, Titanio do Brasil S.A., Salvador, BA (Brazil)

    1994-12-31

    The SO{sub 2} emission reduction unit to be installed in TIBRAS consists of six reactors supplied with activates carbon beds which will remove the SO{sub 2} (0.11 volume percent) contained in the residual gas (150.000 cubic meters per hour) produced in three rotary calciner kilns. The SO{sub 2} reacts with the water in the carbon pores forming diluted sulfuric acid. The activated carbon is fabricated from coke from peat. The weak H{sub 2} SO{sub 4} is reused in the titanium dioxide pigment process. This process is supposed to reduce TIBRAS SO{sub 2} emissions by 50 to 85 percent in addition to eliminating two stacks. 2 figs., 5 tabs.

  14. Application of the Marcus theory to description of the kinetics of reduction processes of organic cations

    International Nuclear Information System (INIS)

    Bogillo, V.I.; Lobanov, V.V.; Gragerov, I.P.

    1987-01-01

    The calculation of the rate constants for the processes in the reduction of diazonium, tropylium, verdazylium, and pyrylium cations by various organic electron donors, using the equations of the Marcus theory with allowance for the reorganization energy of only the outer coordination sphere, leads to values which are one to seven orders of magnitude higher than the experimental values. By quantum-chemical calculations it was shown that the reduction of diazonium and tropylium cations to the corresponding radicals is accompanied by a substantial change in the structure of the reagents. This leads to high values for the reorganization energy of the inner coordination sphere of the cations, which must be taken into account during calculation of the rate constants. The differences in the rate constants of the processes of direct electron transfer from the electron donors to the organic cations and the recombination of these reagents depend on the dissociation energy of the bond of the cation with the donor leading to the electron transfer products

  15. Simultaneous Fe(III) reduction and ammonia oxidation process in Anammox sludge.

    Science.gov (United States)

    Li, Xiang; Huang, Yong; Liu, Heng-Wei; Wu, Chuan; Bi, Wei; Yuan, Yi; Liu, Xin

    2018-02-01

    In recent years, there have been a number of reports on the phenomenon in which ferric iron (Fe(III)) is reduced to ferrous iron [Fe(II)] in anaerobic environments, accompanied by simultaneous oxidation of ammonia to NO 2 - , NO 3 - , or N 2. However, studies on the relevant reaction characteristics and mechanisms are rare. Recently, in research on the effect of Fe(III) on the activity of Anammox sludge, excess ammonia oxidization has also been found. Hence, in the present study, Fe(III) was used to serve as the electron acceptor instead of NO 2 - , and the feasibility and characteristics of Anammox coupled to Fe(III) reduction (termed Feammox) were investigated. After 160days of cultivation, the conversion rate of ammonia in the reactor was above 80%, accompanied by the production of a large amount of NO 3 - and a small amount of NO 2 - . The total nitrogen removal rate was up to 71.8%. Furthermore, quantities of Fe(II) were detected in the sludge fluorescence in situ hybridization (FISH) and denaturated gradient gel electrophoresis (DGGE) analyses further revealed that in the sludge, some Anammox bacteria were retained, and some microbes were enriched during the acclimatization process. We thus deduced that in Anammox sludge, Fe(III) reduction takes place together with ammonia oxidation to NO 2 - and NO 3 - along with the Anammox process. Copyright © 2017. Published by Elsevier B.V.

  16. Recovery of calcium from the effluent of direct oxide reduction process

    International Nuclear Information System (INIS)

    Ferro, P.; Mishra, B.; Olson, D.L.; Moore, J.J.; Averill, W.A.

    1992-01-01

    This paper reports that the production of plutonium by Direct Oxide Reduction [DOR] process using calcium generates significant amount of contaminated waste as calcium oxide saturated calcium chloride salt mix with calcium oxide content of up to 15 wt. pct. Fused salt electrolysis of a simulated slat mix [CaCl 2 + 15 wt. pct. CaO] is being carried out to election calcium, which can be recycled to the DOR rector along with the calcium chloride salt or may be used in-situ in an combined DOR and electrowinning process. The technology will resolve a major contaminated waste disposal problem, besides improving the cost and process efficiency in radioactive metal production. The process is being optimized in terms of the calcium solubility, cell temperature, current density and cell design to maximize the current efficiency. Scattered information is available regarding the solubility of calcium in calcium chloride salt in the present of calcium oxide. The solubility has also been found to depend on the use of graphite as the anode material. A porous ceramic sheath is being used around the anode to prevent the dissolution of electrowon calcium as oxide or carbonate and to prevent the contamination of salt by the anodic carbon. The electrode reactions are affected by the electrolyte composition and its viscosity which varies with time in this process and, therefore, electrochemical impedance is being measured to understand this time-dependent mechanisms

  17. Multiple Memory Processes Following Training That a Food Is Inedible in Aplysia

    OpenAIRE

    Botzer, Dina; Markovich, Silvia; Susswein, Abraham J.

    1998-01-01

    In many organisms, memory after training can be separated into a number of processes. We now report that separable memory processes are also initiated by a training procedure affecting Aplysia feeding behavior, a model system for examining the neural mechanisms underlying the regulation of a complex behavior. Four distinct memory process were identified: (1) a very short-term memory that declines within 15 min, (2) a short-term memory that persists for 0.5–1.0 hr, (3) an intermediate-term mem...

  18. Potentials of Information and Organisational Process Improvement Through Trained Office Staff

    Directory of Open Access Journals (Sweden)

    Chromjaková Felicita

    2012-03-01

    Full Text Available This paper describes the main possibilities on how to improve the production rate, total ef- ficiency and profit-cost ratio in the administrative processes of public administrative offices. The results that are realized from this research serves as an important output for public administration offices in Slovakia. Process improvements can be achieved through the efficient utilization of own-staff potentials, especially by the optimal use of training modules. Well trained own-staff can radically improve the efficiency of office works, jobs and processes and can influence the satisfaction of internal and external stakeholders.

  19. Speech comprehension training and auditory and cognitive processing in older adults.

    Science.gov (United States)

    Pichora-Fuller, M Kathleen; Levitt, Harry

    2012-12-01

    To provide a brief history of speech comprehension training systems and an overview of research on auditory and cognitive aging as background to recommendations for future directions for rehabilitation. Two distinct domains were reviewed: one concerning technological and the other concerning psychological aspects of training. Historical trends and advances in these 2 domains were interrelated to highlight converging trends and directions for future practice. Over the last century, technological advances have influenced both the design of hearing aids and training systems. Initially, training focused on children and those with severe loss for whom amplification was insufficient. Now the focus has shifted to older adults with relatively little loss but difficulties listening in noise. Evidence of brain plasticity from auditory and cognitive neuroscience provides new insights into how to facilitate perceptual (re-)learning by older adults. There is a new imperative to complement training to increase bottom-up processing of the signal with more ecologically valid training to boost top-down information processing based on knowledge of language and the world. Advances in digital technologies enable the development of increasingly sophisticated training systems incorporating complex meaningful materials such as music, audiovisual interactive displays, and conversation.

  20. Radial Basis Functional Model of Multi-Point Dieless Forming Process for Springback Reduction and Compensation

    Directory of Open Access Journals (Sweden)

    Misganaw Abebe

    2017-11-01

    Full Text Available Springback in multi-point dieless forming (MDF is a common problem because of the small deformation and blank holder free boundary condition. Numerical simulations are widely used in sheet metal forming to predict the springback. However, the computational time in using the numerical tools is time costly to find the optimal process parameters value. This study proposes radial basis function (RBF to replace the numerical simulation model by using statistical analyses that are based on a design of experiment (DOE. Punch holding time, blank thickness, and curvature radius are chosen as effective process parameters for determining the springback. The Latin hypercube DOE method facilitates statistical analyses and the extraction of a prediction model in the experimental process parameter domain. Finite element (FE simulation model is conducted in the ABAQUS commercial software to generate the springback responses of the training and testing samples. The genetic algorithm is applied to find the optimal value for reducing and compensating the induced springback for the different blank thicknesses using the developed RBF prediction model. Finally, the RBF numerical result is verified by comparing with the FE simulation result of the optimal process parameters and both results show that the springback is almost negligible from the target shape.

  1. Neural correlates of accelerated auditory processing in children engaged in music training.

    Science.gov (United States)

    Habibi, Assal; Cahn, B Rael; Damasio, Antonio; Damasio, Hanna

    2016-10-01

    Several studies comparing adult musicians and non-musicians have shown that music training is associated with brain differences. It is unknown, however, whether these differences result from lengthy musical training, from pre-existing biological traits, or from social factors favoring musicality. As part of an ongoing 5-year longitudinal study, we investigated the effects of a music training program on the auditory development of children, over the course of two years, beginning at age 6-7. The training was group-based and inspired by El-Sistema. We compared the children in the music group with two comparison groups of children of the same socio-economic background, one involved in sports training, another not involved in any systematic training. Prior to participating, children who began training in music did not differ from those in the comparison groups in any of the assessed measures. After two years, we now observe that children in the music group, but not in the two comparison groups, show an enhanced ability to detect changes in tonal environment and an accelerated maturity of auditory processing as measured by cortical auditory evoked potentials to musical notes. Our results suggest that music training may result in stimulus specific brain changes in school aged children. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. A novel heterogeneous training sample selection method on space-time adaptive processing

    Science.gov (United States)

    Wang, Qiang; Zhang, Yongshun; Guo, Yiduo

    2018-04-01

    The performance of ground target detection about space-time adaptive processing (STAP) decreases when non-homogeneity of clutter power is caused because of training samples contaminated by target-like signals. In order to solve this problem, a novel nonhomogeneous training sample selection method based on sample similarity is proposed, which converts the training sample selection into a convex optimization problem. Firstly, the existing deficiencies on the sample selection using generalized inner product (GIP) are analyzed. Secondly, the similarities of different training samples are obtained by calculating mean-hausdorff distance so as to reject the contaminated training samples. Thirdly, cell under test (CUT) and the residual training samples are projected into the orthogonal subspace of the target in the CUT, and mean-hausdorff distances between the projected CUT and training samples are calculated. Fourthly, the distances are sorted in order of value and the training samples which have the bigger value are selective preference to realize the reduced-dimension. Finally, simulation results with Mountain-Top data verify the effectiveness of the proposed method.

  3. Electricite de France: The search for excellence in the nuclear operator training process

    International Nuclear Information System (INIS)

    Tangy, N.

    1991-01-01

    Electricite de France (EdF) operates 51 pressurized water reactor units. The total staff of operators, operating and safety engineers, and supervisors who perform control room tasks today number about 2,000. During the last decade, EdF has had to recruit and train operating staff to handle the equivalent of four to six units reaching criticality every year. To meet this need, the company training department had to design and commission ∼10 full-scope simulators and 50 partial-task simulators, in synchrony with the various stages of unit design. Beyond the initial education and training of the newly recruited staff, EdF has adopted a retraining process in which every professional works with the simulator twice a year, five days at a time. The latest advances in the field of simulation are the 'steam generator tube break operation' simulator, based on an expert system self-training concept, and the SIPA simulator, based on a real-time contraction of the CATHARE thermohydraulic accident code. These training tools contribute to raising quality in human performance and are used for both training purposes and research and development (R and D). In 1987, the training department of the company started a national R and D program to improve operator evaluation as well as to assess the training scope and methods overall

  4. An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes.

    Science.gov (United States)

    Haas, Emily J; Hoebbel, Cassandra L; Rost, Kristen A

    2014-09-01

    Satisfactory completion of mine safety training is a prerequisite for being hired and for continued employment in the coal industry. Although training includes content to develop skills in a variety of mineworker competencies, research and recommendations continue to specify that specific limitations in the self-escape portion of training still exist and that mineworkers need to be better prepared to respond to emergencies that could occur in their mine. Ecological models are often used to inform the development of health promotion programs but have not been widely applied to occupational health and safety training programs. Nine mine safety trainers participated in in-depth semi-structured interviews. A theoretical analysis of the interviews was completed via an ecological lens. Each level of the social ecological model was used to examine factors that could be addressed both during and after mine safety training. The analysis suggests that problems surrounding communication and collaboration, leadership development, and responsibility and accountability at different levels within the mining industry contribute to deficiencies in mineworkers' mastery and maintenance of skills. This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels-individual, interpersonal, organizational, and community-to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.

  5. The Effectiveness of the Training of Problem-Solving and Decision-Making Skills on the Reduction of Addicts’ Positive Attitudes to Narcotics

    Directory of Open Access Journals (Sweden)

    Farxaneh Bahrami

    2013-05-01

    Full Text Available Aim: The purpose of this study was to examine the effect of the training of problem-solving and decision-making skills on the reduction of addicts’ positive attitudes to narcotics. Method: The design of this study was experimental design namely: pre and post test with control group. The population included all addicts referring to Sanandaj self-report centers (500 addicts. By random sampling, 60 addicts were selected and completed the attitude questionnaire to narcotics use. Each of experimental groups was under problem-solving and decision-making skills training for ten 90 minute sessions. No training given to control group. Results: After training, two experimental groups significantly had lower levels of positive attitude to narcotics use. No difference was observed between two experimental groups. Conclusion: The results of this study indicated that the training of problem-solving and decision-making skills can reduce the addicts’ positive attitudes to narcotics.

  6. Non-fossil reduction materials in the silicon process - properties and behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Myrhaug, Edin Henrik

    2003-07-01

    The purpose of this work has been to clarify the effect of using biocarbon as a reduction material in the silicon process. It was decided to compare the biocarbon with fossil carbon and find possible differences both on process performance and eventually on product quality. The elements in the raw materials added to the silicon process goes into three different products: silicon metal, silica dust and into open air. Based on analysis of raw materials and of produced silicon metal and microsilica extensive material balances have been established. One important result from these are the distribution factors that indicate how much of the trace elements that goes into each medium. Another result is that the boiling point of an element or a compound gives a good indication of were it ends. A high boiling point indicates that the element ends up in the silicon metal, while a low boiling point indicates that the element goes with off-gas into air. With an intermediate boiling point, the element goes into the silica dust. The SiO-reactivity of the reduction materials are commonly acknowledged to affect strongly the productivity and consumption figures of the silicon process. Based on data from thermogravimetric experiments with chemical reaction between carbonaceous spheres and SiO-gas, kinetic parameters have been estimated from the shrinking core model for some selected reduction materials of various sizes and spanning a wide range of SiO-reactivity figures. This model describes the degree of conversion versus time for a single sphere where the chemical reaction progresses in a topochemical manner from the outer surface of the solid towards the centre forming a porous product layer around an unreacted shrinking core. This behaviour is for the selected reduction materials to a large extent supported by an investigation of cross section pictures of fully and 50% converted spheres obtained with a microprobe. The estimated kinetic parameters obtained from the

  7. Effect of Speed of Processing Training on Older Driver Screening Measures

    Directory of Open Access Journals (Sweden)

    Ranmalee Eramudugolla

    2017-10-01

    Full Text Available Objective: Computerized training for cognitive enhancement is of great public interest, however, there is inconsistent evidence for the transfer of training gains to every day activity. Several large trials have focused on speed of processing (SOP training with some promising findings for long-term effects on daily activity, but no immediate transfer to other cognitive tests. Here, we examine the transfer of SOP training gains to cognitive measures that are known predictors of driving safety in older adults.Methods: Fifty-three adults aged 65–87 years who were current drivers participated in a two group non-randomized design with repeated measures and a no-contact matched control group. The Intervention group completed an average of 7.9 (SD = 3.0 hours of self-administered online SOP training at home. Control group was matched on age, gender and test-re-test interval. Measures included the Useful Field of View (UFOV test, a Hazard Perception test, choice reaction time (Cars RT, Trail Making Test B, a Maze test, visual motion threshold, as well as road craft and road knowledge tests.Results: Speed of processing training resulted in significant improvement in processing speed on the UFOV test relative to controls, with an average change of -45.8 ms (SE = 14.5, and effect size of ω2 = 0.21. Performance on the Maze test also improved, but significant slowing on the Hazard Perception test was observed after SOP training. Training effects on the UFOV task was associated with similar effects on the Cars RT, but not the Hazard Perception and Maze tests, suggesting transfer to some but not all driving related measures. There were no effects of training on any of the other measures examined.Conclusion: Speed of processing training effects on the UFOV task can be achieved with self-administered, online training at home, with some transfer to other cognitive tests. However, differential effects of training may be observed for tasks requiring goal

  8. Effect of Speed of Processing Training on Older Driver Screening Measures.

    Science.gov (United States)

    Eramudugolla, Ranmalee; Kiely, Kim M; Chopra, Sidhant; Anstey, Kaarin J

    2017-01-01

    Objective: Computerized training for cognitive enhancement is of great public interest, however, there is inconsistent evidence for the transfer of training gains to every day activity. Several large trials have focused on speed of processing (SOP) training with some promising findings for long-term effects on daily activity, but no immediate transfer to other cognitive tests. Here, we examine the transfer of SOP training gains to cognitive measures that are known predictors of driving safety in older adults. Methods: Fifty-three adults aged 65-87 years who were current drivers participated in a two group non-randomized design with repeated measures and a no-contact matched control group. The Intervention group completed an average of 7.9 ( SD = 3.0) hours of self-administered online SOP training at home. Control group was matched on age, gender and test-re-test interval. Measures included the Useful Field of View (UFOV) test, a Hazard Perception test, choice reaction time (Cars RT), Trail Making Test B, a Maze test, visual motion threshold, as well as road craft and road knowledge tests. Results: Speed of processing training resulted in significant improvement in processing speed on the UFOV test relative to controls, with an average change of -45.8 ms ( SE = 14.5), and effect size of ω 2 = 0.21. Performance on the Maze test also improved, but significant slowing on the Hazard Perception test was observed after SOP training. Training effects on the UFOV task was associated with similar effects on the Cars RT, but not the Hazard Perception and Maze tests, suggesting transfer to some but not all driving related measures. There were no effects of training on any of the other measures examined. Conclusion: Speed of processing training effects on the UFOV task can be achieved with self-administered, online training at home, with some transfer to other cognitive tests. However, differential effects of training may be observed for tasks requiring goal-directed search

  9. Students' inclusion to the value of physical culture during the process of athletic training.

    Directory of Open Access Journals (Sweden)

    Sychov S.O.

    2010-12-01

    Full Text Available Means and methods of students' inclusion to the value of physical culture, during the process of athletic training on the classes of physical education are opened in this article. 52 students took part in research. It is developed the recommendation for the application of pedagogical conditions of use in the expressway strength and strength training, ability to determine dosing load for students with different level of physical background, methods of power properties development both for boys and for girls. It is shown that using of athletic training at the classes of physical education is contributing of students' inclusion to the value of physical culture.

  10. Acquisition of Inductive Biconditional Reasoning Skills: Training of Simultaneous and Sequential Processing.

    Science.gov (United States)

    Lee, Seong-Soo

    1982-01-01

    Tenth-grade students (n=144) received training on one of three processing methods: coding-mapping (simultaneous), coding only, or decision tree (sequential). The induced simultaneous processing strategy worked optimally under rule learning, while the sequential strategy was difficult to induce and/or not optimal for rule-learning operations.…

  11. Pitch and Time Processing in Speech and Tones: The Effects of Musical Training and Attention

    Science.gov (United States)

    Sares, Anastasia G.; Foster, Nicholas E. V.; Allen, Kachina; Hyde, Krista L.

    2018-01-01

    Purpose: Musical training is often linked to enhanced auditory discrimination, but the relative roles of pitch and time in music and speech are unclear. Moreover, it is unclear whether pitch and time processing are correlated across individuals and how they may be affected by attention. This study aimed to examine pitch and time processing in…

  12. INTEGRATION PECULIARITIES OF COMPUTERIZED MEANS OF EDUCATION INTO THE PROCESS OF TEACHER TRAINING AT PEDAGOGICAL COLLEGES

    Directory of Open Access Journals (Sweden)

    Olga M. Naumenko

    2010-08-01

    Full Text Available Important problems of using the computerized means of education in the process of teacher training at pedagogical college are considered. On the basis of the analysis of the organisation of educational process in different pedagogical colleges, the general principles of construction of the educational module “Methodology of computerized means of education in educational process” are considered.

  13. Dynamic Training Elements in a Circuit Theory Course to Implement a Self-Directed Learning Process

    Science.gov (United States)

    Krouk, B. I.; Zhuravleva, O. B.

    2009-01-01

    This paper reports on the implementation of a self-directed learning process in a circuit theory course, incorporating dynamic training elements which were designed on the basis of a cybernetic model of cognitive process management. These elements are centrally linked in a dynamic learning frame, created on the monitor screen, which displays the…

  14. The peculiarities of acrobat exercises usage in the handballers training process

    Directory of Open Access Journals (Sweden)

    Serdyuk Dmitrii Georgievich

    2009-02-01

    Full Text Available Special complexes of acrobatic exercises for training handballers are developed. The level of efficiency of effect of exercises on development of coordination abilities is determined. During application of exercises of the given type it is necessary to take into account a period and a cycle of preparation, personalities of handballers, a general orientation of training process. It allows avoidance of negative effect of acrobatic exercises on special exercises of competitive character.

  15. Pulse-train control of branching processes: Elimination of background and intruder state population

    International Nuclear Information System (INIS)

    Seidl, Markus; Uiberacker, Christoph; Jakubetz, Werner; Etinski, Mihajlo

    2008-01-01

    The authors introduce and describe pulse train control (PTC) of population branching in strongly coupled processes as a novel control tool for the separation of competing multiphoton processes. Control strategies are presented based on the different responses of processes with different photonicities and/or different frequency detunings to the pulse-to-pulse time delay and the pulse-to-pulse phase shift in pulse trains. The control efficiency is further enhanced by the property of pulse trains that complete population transfer can be obtained over an extended frequency range that replaces the resonance frequency of simple pulses. The possibility to freely tune the frequency assists the separation of the competing processes and reduces the number of subpulses required for full control. As a sample application, PTC of leaking multiphoton resonances is demonstrated by numerical simulations. In model systems exhibiting sizable background (intruder) state population if excited with single pulses, PTC leading to complete accumulation of population in the target state and elimination of background population is readily achieved. The analysis of the results reveals different mechanisms of control and provides clues on the mechanisms of the leaking process itself. In an alternative setup, pulse trains can be used as a phase-sensitive tool for level switching. By changing only the pulse-to-pulse phase shift of a train with otherwise unchanged parameters, population can be transferred to any of two different target states in a near-quantitative manner.

  16. Study on the mass transfer of oxygen in an electrolytic reduction process of ACP

    International Nuclear Information System (INIS)

    Park, Byung Heung; Park, Sung Bin; Seo, Chung Seok; Park, Seong Won

    2005-01-01

    The Advanced Spent Fuel Conditioning Process (ACP) is a molten-salt-based back-end fuel cycle technology developed at KAERI. The target fuel type for the process is the oxide fuel unloaded from PWRs which are the main prototype reactor commercially operating in Korea. The volume and the radiotoxicity of the spent fuel decrease to quarters of the initial volume and radiotoxicity after being reduced to metal forms and removing some elements into a molten salt. The reduction of the two properties improves the convenience in managing the spent fuels and makes it possible for disposal sites to be made the best use of. Metallization of the spent oxide fuels is accomplished in an electrolytic reduction cell where a molten LiCl is adopted as an electric medium and Li 2 O is added to increase the activity of the oxygen ion in the system. A porous magnesia filter, a SUS solid conductor, and the metal oxides to be reduced constitute a cathode and anodes are made of platinum. The only cation in the liquid phase is lithium at the first stage and the ion diffuses through the pores of the magnesia filter and then receives electrons to become a metal. The reduced lithium metal snatches oxygen from the metal oxides in the filter and transforms into lithium oxide which diffuses back to the molten salt phase leaving the reduced metal at the inside of the filter. The lithium oxide is dissociated to lithium and oxygen ions once it dissolves in the molten salt if the concentration is within the solubility limit. Hence the actual diffusing element is oxygen in an ionic state rather than the lithium oxide since there is no concentration gradient for the lithium ion to move on - the lithium ion is the main cation in the system though some alkali and alkaline-earth metals dissolve in the molten salt phase to be cations. The analysis of the mass transfer of oxygen in the electrolytic reduction process is, thus, of importance for the metallization process to be completely interpreted

  17. The Literacy Factor: Adding Value to Training. Investigation of the Inclusion of Literacy in Training Packages in the Food Processing Industry.

    Science.gov (United States)

    Sanguinetti, Jill

    The effects of the inclusion of literacy and numeracy competencies within Australia's food processing industry training package were examined in two case studies of training at two food processing facilities in Victoria. The first case study involved a large pasta factory that had approximately 270 employees and a contract with a registered…

  18. EVALUATION OF FINANCIAL AUTONOMY PROCESS OF BINH THUAN PROVINCE IN TRAINING PUBLIC HUMAN RESOURCES IN FOREIGN COUNTRIES

    OpenAIRE

    NGUYEN THANH, NHAN

    2012-01-01

    This paper will discuss the financial autonomy in training public human resources in foreign countries in Binh Thuan province. The process of financial autonomy helps Binh Thuan province be proactive in dealing with its performances in many aspects, especially in training public human resources. Although central government has built many training policies, the training focuses on the fields that meet the general requirements of the whole country. This leads to the situation that the trained m...

  19. Design and implementation of a virtual world training simulation of ICU first hour handover processes.

    Science.gov (United States)

    Brown, Ross; Rasmussen, Rune; Baldwin, Ian; Wyeth, Peta

    2012-08-01

    Nursing training for an Intensive Care Unit (ICU) is a resource intensive process. High demands are made on staff, students and physical resources. Interactive, 3D computer simulations, known as virtual worlds, are increasingly being used to supplement training regimes in the health sciences; especially in areas such as complex hospital ward processes. Such worlds have been found to be very useful in maximising the utilisation of training resources. Our aim is to design and develop a novel virtual world application for teaching and training Intensive Care nurses in the approach and method for shift handover, to provide an independent, but rigorous approach to teaching these important skills. In this paper we present a virtual world simulator for students to practice key steps in handing over the 24/7 care requirements of intensive care patients during the commencing first hour of a shift. We describe the modelling process to provide a convincing interactive simulation of the handover steps involved. The virtual world provides a practice tool for students to test their analytical skills with scenarios previously provided by simple physical simulations, and live on the job training. Additional educational benefits include facilitation of remote learning, high flexibility in study hours and the automatic recording of a reviewable log from the session. To the best of our knowledge, we believe this is a novel and original application of virtual worlds to an ICU handover process. The major outcome of the work was a virtual world environment for training nurses in the shift handover process, designed and developed for use by postgraduate nurses in training. Copyright © 2012 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

  20. Reduction of COD in wastewater from an organized tannery industrial region by Electro-Fenton process

    International Nuclear Information System (INIS)

    Kurt, Ugur; Apaydin, Omer; Gonullu, M. Talha

    2007-01-01

    Advanced oxidation processes (AOPs) have led the way in the treatment of aqueous waste and are rapidly becoming the chosen technology for many applications. In this paper, COD reduction potential of leather tanning industry wastewaters by Electro-Fenton (EF) oxidation, as one of the AOPs, was experimentally evaluated. The wastewater sample was taken from an outlet of an equalization basin in a common treatment plant of an organized tannery industrial region in Istanbul, Turkey. Treatment of the wastewater was carried out by an electrochemical batch reactor equipped with two iron electrodes, which were connected parallel to each other. The oxidation process was studied for optimization of H 2 O 2 and the electricity consumptions were observed at different contact times under different pH conditions (3.0, 5.0 and 7.2). In each case, electricity consumption for decreased COD mass was estimated. In this process, COD was reduced by 60-70% within 10 min. By taking into consideration the local sewerage discharge limit, applicability of EF process for the tannery wastewaters was evaluated

  1. Reduction of COD in wastewater from an organized tannery industrial region by Electro-Fenton process

    Energy Technology Data Exchange (ETDEWEB)

    Kurt, Ugur [Yildiz Technical University, Environmental Engineering Department, 34349 Istanbul (Turkey)]. E-mail: ukurt@yildiz.edu.tr; Apaydin, Omer [Yildiz Technical University, Environmental Engineering Department, 34349 Istanbul (Turkey)]. E-mail: apaydin@yildiz.edu.tr; Gonullu, M. Talha [Yildiz Technical University, Environmental Engineering Department, 34349 Istanbul (Turkey)]. E-mail: gonul@yildiz.edu.tr

    2007-05-08

    Advanced oxidation processes (AOPs) have led the way in the treatment of aqueous waste and are rapidly becoming the chosen technology for many applications. In this paper, COD reduction potential of leather tanning industry wastewaters by Electro-Fenton (EF) oxidation, as one of the AOPs, was experimentally evaluated. The wastewater sample was taken from an outlet of an equalization basin in a common treatment plant of an organized tannery industrial region in Istanbul, Turkey. Treatment of the wastewater was carried out by an electrochemical batch reactor equipped with two iron electrodes, which were connected parallel to each other. The oxidation process was studied for optimization of H{sub 2}O{sub 2} and the electricity consumptions were observed at different contact times under different pH conditions (3.0, 5.0 and 7.2). In each case, electricity consumption for decreased COD mass was estimated. In this process, COD was reduced by 60-70% within 10 min. By taking into consideration the local sewerage discharge limit, applicability of EF process for the tannery wastewaters was evaluated.

  2. Chemical Separation of Fission Products in Uranium Metal Ingots from Electrolytic Reduction Process

    International Nuclear Information System (INIS)

    Lee, Chang-Heon; Kim, Min-Jae; Choi, Kwang-Soon; Jee, Kwang-Yong; Kim, Won-Ho

    2006-01-01

    Chemical characterization of various process materials is required for the optimization of the electrolytic reduction process in which uranium dioxide, a matrix of spent PWR fuels, is electrolytically reduced to uranium metal in a medium of LiCl-Li 2 O molten at 650 .deg. C. In the uranium metal ingots of interest in this study, residual process materials and corrosion products as well as fission products are involved to some extent, which further adds difficulties to the determination of trace fission products. Besides it, direct inductively coupled plasma atomic emission spectrometric (ICP-AES) analysis of uranium bearing materials such as the uranium metal ingots is not possible because a severe spectral interference is found in the intensely complex atomic emission spectra of uranium. Thus an adequate separation procedure for the fission products should be employed prior to their determinations. In present study ion exchange and extraction chromatographic methods were adopted for selective separation of the fission products from residual process materials, corrosion products and uranium matrix. The sorption behaviour of anion and tri-nbutylphosphate (TBP) extraction chromatographic resins for the metals in acidic solutions simulated for the uranium metal ingot solutions was investigated. Then the validity of the separation procedure for its reliability and applicability was evaluated by measuring recoveries of the metals added

  3. The Training of Morphological Decomposition in Word Processing and Its Effects on Literacy Skills

    Directory of Open Access Journals (Sweden)

    Irit Bar-Kochva

    2017-10-01

    Full Text Available This study set out to examine the effects of a morpheme-based training on reading and spelling in fifth and sixth graders (N = 47, who present poor literacy skills and speak German as a second language. A computerized training, consisting of a visual lexical decision task (comprising 2,880 items, presented in 12 sessions, was designed to encourage fast morphological analysis in word processing. The children were divided between two groups: the one underwent a morpheme-based training, in which word-stems of inflections and derivations were presented for a limited duration, while their pre- and suffixes remained on screen until response. Another group received a control training consisting of the same task, except that the duration of presentation of a non-morphological unit was restricted. In a Word Disruption Task, participants read words under three conditions: morphological separation (with symbols separating between the words’ morphemes, non-morphological separation (with symbols separating between non-morphological units of words, and no-separation (with symbols presented at the beginning and end of each word. The group receiving the morpheme-based program improved more than the control group in terms of word reading fluency in the morphological condition. The former group also presented similar word reading fluency after training in the morphological condition and in the no-separation condition, thereby suggesting that the morpheme-based training contributed to the integration of morphological decomposition into the process of word recognition. At the same time, both groups similarly improved in other measures of word reading fluency. With regard to spelling, the morpheme-based training group showed a larger improvement than the control group in spelling of trained items, and a unique improvement in spelling of untrained items (untrained word-stems integrated into trained pre- and suffixes. The results further suggest some contribution of

  4. Do processes for training future police officers improve their mental health?

    Directory of Open Access Journals (Sweden)

    Miguel Clemente

    2016-06-01

    Full Text Available The selection and training of future police officer candidates are two fundamental processes in achieving an effective police force. From a psychological point of view, police officer training should improve candidates' mental health, so that they can perform their police work more appropriately, benefiting not only themselves but society as a whole. This article attempts to determine whether the training given to candidates selected for training prior to being selected as officers improves their mental health. There is no precedent for research in this regard, since work in Psychology has focused on verifying that subjects do not have psychological pathologies rather than examining the effect of the training they are given. This study looks at a sample of 713 persons selected for a pre-police training program designed to allow them to subsequently join the Peruvian police force. The Derogatis SCL-90 test was used as a personality measure. The test was administered before they received training and after they had completed it (only data from subjects who passed the police entrance exam were considered. The results indicate that the training process produced no changes in personality variables that imply major psychological pathologies, but such changes did occur in variables associated with lower degree psychological pathologies. We can therefore say that there was a decline in mental health among future police officers, or an increase in their psychological pathologies. We will discuss these results and identify the limitations of the study with an eye toward further research. It is recommended that training systems be created that improve the mental health of future police officers.

  5. Effects of an Advocacy Trial on Food Industry Salt Reduction Efforts-An Interim Process Evaluation.

    Science.gov (United States)

    Trevena, Helen; Petersen, Kristina; Thow, Anne Marie; Dunford, Elizabeth K; Wu, Jason H Y; Neal, Bruce

    2017-10-17

    The decisions made by food companies are a potent factor shaping the nutritional quality of the food supply. A number of non-governmental organizations (NGOs) advocate for corporate action to reduce salt levels in foods, but few data define the effectiveness of advocacy. This present report describes the process evaluation of an advocacy intervention delivered by one Australian NGO directly to food companies to reduce the salt content of processed foods. Food companies were randomly assigned to intervention ( n = 22) or control ( n = 23) groups. Intervention group companies were exposed to pre-planned and opportunistic communications, and control companies to background activities. Seven pre-defined interim outcome measures provided an indication of the effect of the intervention and were assessed using intention-to-treat analysis. These were supplemented by qualitative data from nine semi-structured interviews. The mean number of public communications supporting healthy food made by intervention companies was 1.5 versus 1.8 for control companies ( p = 0.63). Other outcomes, including the mean number of news articles, comments and reports (1.2 vs. 1.4; p = 0.72), a published nutrition policy (23% vs. 44%; p = 0.21), public commitment to the Australian government's Food and Health Dialogue (FHD) (41% vs. 61%; p = 0.24), evidence of a salt reduction plan (23% vs. 30%; p = 0.56), and mean number of communications with the NGO (15 vs. 11; p = 0.28) were also not significantly different. Qualitative data indicated the advocacy trial had little effect. The absence of detectable effects of the advocacy intervention on the interim markers indicates there may be no impact of the NGO advocacy trial on the primary outcome of salt reduction in processed foods.

  6. IMPACTS OF ANTIFOAM ADDITIONS AND ARGON BUBBLING ON DEFENSE WASTE PROCESSING FACILITY REDUCTION/OXIDATION

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C.; Johnson, F.

    2012-06-05

    During melting of HLW glass, the REDOX of the melt pool cannot be measured. Therefore, the Fe{sup +2}/{Sigma}Fe ratio in the glass poured from the melter must be related to melter feed organic and oxidant concentrations to ensure production of a high quality glass without impacting production rate (e.g., foaming) or melter life (e.g., metal formation and accumulation). A production facility such as the Defense Waste Processing Facility (DWPF) cannot wait until the melt or waste glass has been made to assess its acceptability, since by then no further changes to the glass composition and acceptability are possible. therefore, the acceptability decision is made on the upstream process, rather than on the downstream melt or glass product. That is, it is based on 'feed foward' statistical process control (SPC) rather than statistical quality control (SQC). In SPC, the feed composition to the melter is controlled prior to vitrification. Use of the DWPF REDOX model has controlled the balanjce of feed reductants and oxidants in the Sludge Receipt and Adjustment Tank (SRAT). Once the alkali/alkaline earth salts (both reduced and oxidized) are formed during reflux in the SRAT, the REDOX can only change if (1) additional reductants or oxidants are added to the SRAT, the Slurry Mix Evaporator (SME), or the Melter Feed Tank (MFT) or (2) if the melt pool is bubble dwith an oxidizing gas or sparging gas that imposes a different REDOX target than the chemical balance set during reflux in the SRAT.

  7. Psychological Support as a Factor of the Training Process Quality Improvement

    Directory of Open Access Journals (Sweden)

    Jan Kosendiak

    2017-06-01

    Full Text Available Supportive activities may be one of the ways of the training process optimization. Support involves both components of the training process, i.e. training and rest. The training support is aimed at the training load increase or at such orientation of the adaptation processes to meet the training goals as closely as possible. The different aims lay behind the methods that support the rest mechanisms. It is about increasing the peace of the regeneration and recovery processes. This term describes all activities aimed at restoring the full exercise capacity of the athlete after work. The psychological support of the training process can be one of the ways to minimize training disturbances and it should therefore be an essential part of the training process management in case of the top ranked athletes. To improve the psychological support system of the training process and to improve the system quality, it is necessary to analyze the current situation. That’s why, authors of the paper decided to ask the members of the Polish Olympic team competed at the 2016 Olympic Games in Rio de Janeiro on types of relaxation techniques they accepted and used before the competition. The relaxation techniques were deliberately limited to the pre-start relaxation techniques as the study was treated as a pilot study dedicated to the problem identification. Therefore, the authors of the paper formulated its aim, as the identification of the pre-start relaxation preferences of the Olympic team members. The following research questions were formulated to meet the aim of the study:  •     What types of the pre-start relaxation techniques are declared and accepted by the Olympians? •     Could the preferred pre-start relaxation techniques be considered rational, planned, and consciously implemented? A written interview with an online questionnaire was used as a research method. The study was conducted before the 2016 Olympic Games in Rio de

  8. Evaluation of a School-Based Train-the-Trainer Intervention Program to Teach First Aid and Risk Reduction among High School Students

    Science.gov (United States)

    Carruth, Ann K.; Pryor, Susan; Cormier, Cathy; Bateman, Aaron; Matzke, Brenda; Gilmore, Karen

    2010-01-01

    Background: Farming is a hazardous occupation posing health risks from agricultural exposures for the farm owner and family members. First Aid for Rural Medical Emergencies (F.A.R.M.E.) was developed to support a train-the-trainer (TTT) program to prepare high school students to teach first aid skills and risk reduction through peer interaction.…

  9. A Comparison of Effectiveness of Parent Behavioral Management Training and Methylphenidate on Reduction of Symptomsof Attention Deficit Hyperactivity Disorder

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Mohammadi

    2016-09-01

    Full Text Available Attention deficit hyperactivity disorder (ADHD is one of the most common psychological disorders of childhood. Methylphenidate is highly effective in the treatment of ADHD. This study aimed to determine the effectiveness of combined Parent behavioral management training (PBMT and medication treatment (Methylphenidate in reducing ADHD symptoms in 6-12-year-old children, using randomized sampling. A total of 50 children with ADHD were assigned into two groups: an experimental group of PBMT and a control group of medication treatment (Methylphenidate without other interventions. Conners’ Parent Rating Scale (CPRS-48 was employed before and after interventions to determine the effects. Descriptive Statistics method (consisting of Mean and Standard deviation and Statistical inference method, (including t-test and Levene's Test were used for data analysis.  Findings revealed that the combined behavioral intervention of PBMT and methylphenidate treatment is more effective in reduction of ADHD in children. The difference of means between pre-test and post-test of CPRS in the experimental group was equal to 10.77, and it was equal to 1.88 in the control group. In addition, PBMT was more effective in the case of younger parents (P<0.025. However, parents’ education level did not affect the behavioral intervention (P<0.025.The findings suggest that combined intervention of PBMT and methylphenidate is effective in reducing the symptoms of ADHD in children.

  10. Radiation dose reduction with dictionary learning based processing for head CT

    International Nuclear Information System (INIS)

    Chen, Yang; Shi, Luyao; Hu, Yining; Luo, Limin; Yang, Jiang; Yin, Xindao; Coatrieux, Jean-Louis

    2014-01-01

    In CT, ionizing radiation exposure from the scan has attracted much concern from patients and doctors. This work is aimed at improving head CT images from low-dose scans by using a fast Dictionary learning (DL) based post-processing. Both Low-dose CT (LDCT) and Standard-dose CT (SDCT) nonenhanced head images were acquired in head examination from a multi-detector row Siemens Somatom Sensation 16 CT scanner. One hundred patients were involved in the experiments. Two groups of LDCT images were acquired with 50 % (LDCT50 %) and 25 % (LDCT25 %) tube current setting in SDCT. To give quantitative evaluation, Signal to noise ratio (SNR) and Contrast to noise ratio (CNR) were computed from the Hounsfield unit (HU) measurements of GM, WM and CSF tissues. A blinded qualitative analysis was also performed to assess the processed LDCT datasets. Fifty and seventy five percent dose reductions are obtained for the two LDCT groups (LDCT50 %, 1.15 ± 0.1 mSv; LDCT25 %, 0.58 ± 0.1 mSv; SDCT, 2.32 ± 0.1 mSv; P < 0.001). Significant SNR increase over the original LDCT images is observed in the processed LDCT images for all the GM, WM and CSF tissues. Significant GM–WM CNR enhancement is noted in the DL processed LDCT images. Higher SNR and CNR than the reference SDCT images can even be achieved in the processed LDCT50 % and LDCT25 % images. Blinded qualitative review validates the perceptual improvements brought by the proposed approach. Compared to the original LDCT images, the application of DL processing in head CT is associated with a significant improvement of image quality.

  11. Transfer after process-based object-location memory training in healthy older adults.

    Science.gov (United States)

    Zimmermann, Kathrin; von Bastian, Claudia C; Röcke, Christina; Martin, Mike; Eschen, Anne

    2016-11-01

    A substantial part of age-related episodic memory decline has been attributed to the decreasing ability of older adults to encode and retrieve associations among simultaneously processed information units from long-term memory. In addition, this ability seems to share unique variance with reasoning. In this study, we therefore examined whether process-based training of the ability to learn and remember associations has the potential to induce transfer effects to untrained episodic memory and reasoning tasks in healthy older adults (60-75 years). For this purpose, the experimental group (n = 36) completed 30 sessions of process-based object-location memory training, while the active control group (n = 31) practiced visual perception on the same material. Near (spatial episodic memory), intermediate (verbal episodic memory), and far transfer effects (reasoning) were each assessed with multiple tasks at four measurements (before, midway through, immediately after, and 4 months after training). Linear mixed-effects models revealed transfer effects on spatial episodic memory and reasoning that were still observed 4 months after training. These results provide first empirical evidence that process-based training can enhance healthy older adults' associative memory performance and positively affect untrained episodic memory and reasoning abilities. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  12. Influence of dihydroxybenzenes on paracetamol and ciprofloxacin degradation and iron(III) reduction in Fenton processes.

    Science.gov (United States)

    Costa E Silva, Beatriz; de Lima Perini, João Angelo; Nogueira, Raquel F Pupo

    2017-03-01

    The degradation of paracetamol (PCT) and ciprofloxacin (CIP) was compared in relation to the generation of dihydroxylated products, Fe(III) reduction and reaction rate in the presence of dihydroxybenzene (DHB) compounds, or under irradiation with free iron (Fe 3+ ) or citrate complex (Fecit) in Fenton or photo-Fenton process. The formation of hydroquinone (HQ) was observed only during PCT degradation in the dark, which increased drastically the rate of PCT degradation, since HQ formed was able to reduce Fe 3+ and contributed to PCT degradation efficiency. When HQ was initially added, PCT and CIP degradation rate in the dark was much higher in comparison to the absence of HQ, due to the higher and faster formation of Fe 2+ at the beginning of reaction. In the absence of HQ, no CIP degradation was observed; however, when HQ was added after 30 min, the degradation rate increased drastically. Ten PCT hydroxylated intermediates were identified in the absence of HQ, which could contribute for Fe(III) reduction and consequently to the degradation in a similar way as HQ. During CIP degradation, only one product of hydroxyl radical attack on benzene ring and substitution of the fluorine atom was identified when HQ was added to the reaction medium.

  13. Sequential reductive and oxidative biodegradation of chloroethenes stimulated in a coupled bioelectro-process.

    Science.gov (United States)

    Lohner, Svenja T; Becker, Dirk; Mangold, Klaus-Michael; Tiehm, Andreas

    2011-08-01

    This article for the first time demonstrates successful application of electrochemical processes to stimulate sequential reductive/oxidative microbial degradation of perchloroethene (PCE) in mineral medium and in contaminated groundwater. In a flow-through column system, hydrogen generation at the cathode supported reductive dechlorination of PCE to cis-dichloroethene (cDCE), vinyl chloride (VC), and ethene (ETH). Electrolytically generated oxygen at the anode allowed subsequent oxidative degradation of the lower chlorinated metabolites. Aerobic cometabolic degradation of cDCE proved to be the bottleneck for complete metabolite elimination. Total removal of chloroethenes was demonstrated for a PCE load of approximately 1.5 μmol/d. In mineral medium, long-term operation with stainless steel electrodes was demonstrated for more than 300 days. In contaminated groundwater, corrosion of the stainless steel anode occurred, whereas DSA (dimensionally stable anodes) proved to be stable. Precipitation of calcareous deposits was observed at the cathode, resulting in a higher voltage demand and reduced dechlorination activity. With DSA and groundwater from a contaminated site, complete degradation of chloroethenes in groundwater was obtained for two months thus demonstrating the feasibility of the sequential bioelectro-approach for field application.

  14. Diffusion of samarium into cobalt in the reduction-diffusion process

    International Nuclear Information System (INIS)

    Freitas Nogueira, P. de; Neto, F.B.; Landgraf, F.J.G.

    1998-01-01

    The presence of metallic cobalt in samarium-cobalt powders is a major cause for low magnetic properties in magnets. This paper intends to investigate the effect of time and temperature in the microstructure of powders produced by reduction-diffusion. This process, developed for the production of rare earth-transition metal alloys, consists on the reduction of the rare earth oxide with metallic calcium (or calcium hydride) and its subsequent diffusion into the cobalt particle. In the present work, a mixture of samarium oxide, cobalt powder and metallic calcium was heated to 1100 or 1200 C for 2 or 4 hours in a tubular furnace under one atmosphere of purified argon. The material thereof obtained, a sintered mass is disintegrated by aqueous crepitation. The powder was evaluated in terms of its chemical composition, its samarium yield and the intermetallic compounds present. The samarium, oxygen and calcium content of the powders produced were adequate for magnet production. However, despite the massive formation of the SmCo 5 compound after 2 hours at 1100 C, final homogeneity is attained only after 4 hours at 1200 C, with the presence of SmCo 5 and Sm 2 Co 7 and the absence of the Sm 5 Co 19 compound. Also, metallic cobalt and Sm 2 Co 17 were observed in the materials produced after 2 hours at 1100 or 1200 C. (orig.)

  15. The Managerial Reduction in the Management Technologies Transposition Process to Public Organizations

    Directory of Open Access Journals (Sweden)

    Sandro Trescastro Bergue

    2010-04-01

    Full Text Available This essay discusses the phenomenon of the implementation of technologies designed in the management business, with emphasis on relations with public organizations. It proposes a reflection on the concept of sociological reduction by Guerreiro Ramos, recovering its roots in Husserl and Heidegger and their relationship with the concepts of creative adaptation and the translation of managerial issues. Contextualized in the paradigm of new public management and the list of values and assumptions on which this movement is based, the analysis of the reproduction of practices known in private organizations by public ones seeking their legitimacy has revealed the formality and ceremonial aspect of this contemporary phenomenon. The importance of bringing knowledge from the organizational field that subsidizes management as well as the coherence of these cultural objects in terms of concepts and assumptions of organization are highlighted here. The process of transpositions, contrasting with reproducible traits of Brazilian managerial culture that are historically constructed but consistent with the notion of sociological reduction, requires a critical, conscious and engaged attitude on the part of members of the organization not only regarding the relevance of the imported content but also giving new meaning to the concepts underlying the management technologies.

  16. From zinc selenate to zinc selenide nano structures synthesized by reduction process

    International Nuclear Information System (INIS)

    Hutagalung, S.D.; Eng, S.T.; Ahmad, Z.A.; Ishak Mat; Yussof Wahab

    2009-01-01

    One-dimensional nano structure materials are very attractive because of their electronic and optical properties depending on their size. It is well known that properties of material can be tuned by reducing size to nano scale because at the small sizes, that they behave differently with its bulk materials and the band gap will control by the size. The tunability of the band gap makes nano structured materials useful for many applications. As one of the wide band gaps semiconductor compounds, zinc selenide (ZnSe) nano structures (nanoparticles, nano wires, nano rods) have received much attention for the application in optoelectronic devices, such as blue laser diode, light emitting diodes, solar cells and IR optical windows. In this study, ZnSe nano structures have been synthesized by reduction process of zinc selenate using hydrazine hydrate (N 2 H 4 .2H 2 O). The reductive agent of hydrazine hydrate was added to the starting materials of zinc selenate were heat treated at 500 degree Celsius for 1 hour under argon flow to form one-dimensional nano structures. The SEM and TEM images show the formation of nano composite-like structure, which some small nano bar and nano pellets stick to the rod. The x-ray diffraction and elemental composition analysis confirm the formation of mixture zinc oxide and zinc selenide phases. (author)

  17. Controlled growth of gold nanoparticles in zeolite L via ion-exchange reactions and thermal reduction processes

    KAUST Repository

    Zeng, Shangjing; Ding, Shuang; Li, Shangyu; Wang, Runwei; Zhang, Zongtao

    2014-01-01

    The growth of gold nanoparticles in zeolite can be controlled using ion-exchange reactions and thermal reduction processes. We produce a number of different sizes of the gold nanoparticles with the particle size increasing with increased temperature

  18. Evaluation of Chemical Kinetic for Mathematics Model Reduction of Cadmium Reaction Rate, Constant and Reaction Orde in to Electrochemical Process

    International Nuclear Information System (INIS)

    Prayitno

    2007-01-01

    The experiment was reduction of cadmium rate with electrochemical influenced by time process, concentration, current strength and type of electrode plate. The aim of the experiment was to know the influence, mathematic model reduction of cadmium the reaction rate, reaction rate constant and reaction orde influenced by time process, concentration, current strength and type of electrode plate. Result of research indicate the time processing if using plate of copper electrode is during 30 minutes and using plate of aluminium electrode is during 20 minutes. Condition of strong current that used in process of electrochemical is only 0.8 ampere and concentration effective is 5.23 mg/l. The most effective type Al of electrode plate for reduction from waste and the efficiency of reduction is 98 %. (author)

  19. An Interactive Procedure to Preserve the Desired Edges during the Image Processing of Noise Reduction

    Directory of Open Access Journals (Sweden)

    Lin-Tsang Lee

    2010-01-01

    Full Text Available The paper propose a new procedure including four stages in order to preserve the desired edges during the image processing of noise reduction. A denoised image can be obtained from a noisy image at the first stage of the procedure. At the second stage, an edge map can be obtained by the Canny edge detector to find the edges of the object contours. Manual modification of an edge map at the third stage is optional to capture all the desired edges of the object contours. At the final stage, a new method called Edge Preserved Inhomogeneous Diffusion Equation (EPIDE is used to smooth the noisy images or the previously denoised image at the first stage for achieving the edge preservation. The Optical Character Recognition (OCR results in the experiments show that the proposed procedure has the best recognition result because of the capability of edge preservation.

  20. Reduction of tensile residual stresses during the drawing process of tungsten wires

    International Nuclear Information System (INIS)

    Rodriguez Ripoll, Manel; Weygand, Sabine M.; Riedel, Hermann

    2010-01-01

    Tungsten wires are commonly used in the lighting industry as filaments for lamps. During the drawing process, the inhomogeneous deformation imparted by the drawing die causes tensile residual stresses at the wire surface in circumferential direction. These stresses have a detrimental effect for the wire because they are responsible for driving longitudinal cracks, known as splits. This work proposes two methods for reducing the residual stresses during wire drawing, namely applying an advanced die geometry and performing an inexpensive post-drawing treatment based on targeted bending operations. These two methods are analyzed with finite element simulations using material parameters obtained by mechanical tests on tungsten wires at different temperatures as input data. The computed results predict a substantial reduction of the circumferential residual stresses, thus reducing the risk of splitting.

  1. Defining Constellation Suit Helmet Field of View Requirements Employing a Mission Segment Based Reduction Process

    Science.gov (United States)

    McFarland, Shane

    2009-01-01

    Field of view has always been a design feature paramount to helmets, and in particular space suits, where the helmet must provide an adequate field of view for a large range of activities, environments, and body positions. For Project Constellation, a different approach to helmet requirement maturation was utilized; one that was less a direct function of body position and suit pressure and more a function of the mission segment in which the field of view will be required. Through taxonimization of various parameters that affect suited field of view, as well as consideration for possible nominal and contingency operations during that mission segment, a reduction process was employed to condense the large number of possible outcomes to only six unique field of view angle requirements that still captured all necessary variables while sacrificing minimal fidelity.

  2. A process for selection and training of super-users for ERP implementation projects

    DEFF Research Database (Denmark)

    Danielsen, Peter; Sandfeld Hansen, Kenneth; Helt, Mads

    2017-01-01

    The concept of super-users as a means to facilitate ERP implementation projects has recently taken a foothold in practice, but is still largely overlooked in research. In particular, little is known about the selection and training processes required to successfully develop skilled super-users in......The concept of super-users as a means to facilitate ERP implementation projects has recently taken a foothold in practice, but is still largely overlooked in research. In particular, little is known about the selection and training processes required to successfully develop skilled super...

  3. A whole-process progressive training mode to foster optoelectronic students' innovative practical ability

    Science.gov (United States)

    Zhong, Hairong; Xu, Wei; Hu, Haojun; Duan, Chengfang

    2017-08-01

    This article analyzes the features of fostering optoelectronic students' innovative practical ability based on the knowledge structure of optoelectronic disciplines, which not only reveals the common law of cultivating students' innovative practical ability, but also considers the characteristics of the major: (1) The basic theory is difficult, and the close combination of science and technology is obvious; (2)With the integration of optics, mechanics, electronics and computer, the system technology is comprehensive; (3) It has both leading-edge theory and practical applications, so the benefit of cultivating optoelectronic students is high ; (4) The equipment is precise and the practice is costly. Considering the concept and structural characteristics of innovative and practical ability, and adhering to the idea of running practice through the whole process, we put forward the construction of three-dimensional innovation and practice platform which consists of "Synthetically Teaching Laboratory + Innovation Practice Base + Scientific Research Laboratory + Major Practice Base + Joint Teaching and Training Base", and meanwhile build a whole-process progressive training mode to foster optoelectronic students' innovative practical ability, following the process of "basic experimental skills training - professional experimental skills training - system design - innovative practice - scientific research project training - expanded training - graduation project": (1) To create an in - class practical ability cultivation environment that has distinctive characteristics of the major, with the teaching laboratory as the basic platform; (2) To create an extra-curricular innovation practice activities cultivation environment that is closely linked to the practical application, with the innovation practice base as a platform for improvement; (3) To create an innovation practice training cultivation environment that leads the development of cutting-edge, with the scientific

  4. Massive-training artificial neural network (MTANN) for reduction of false positives in computer-aided detection of polyps: Suppression of rectal tubes

    International Nuclear Information System (INIS)

    Suzuki, Kenji; Yoshida, Hiroyuki; Naeppi, Janne; Dachman, Abraham H.

    2006-01-01

    One of the limitations of the current computer-aided detection (CAD) of polyps in CT colonography (CTC) is a relatively large number of false-positive (FP) detections. Rectal tubes (RTs) are one of the typical sources of FPs because a portion of a RT, especially a portion of a bulbous tip, often exhibits a cap-like shape that closely mimics the appearance of a small polyp. Radiologists can easily recognize and dismiss RT-induced FPs; thus, they may lose their confidence in CAD as an effective tool if the CAD scheme generates such ''obvious'' FPs due to RTs consistently. In addition, RT-induced FPs may distract radiologists from less common true positives in the rectum. Therefore, removal RT-induced FPs as well as other types of FPs is desirable while maintaining a high sensitivity in the detection of polyps. We developed a three-dimensional (3D) massive-training artificial neural network (MTANN) for distinction between polyps and RTs in 3D CTC volumetric data. The 3D MTANN is a supervised volume-processing technique which is trained with input CTC volumes and the corresponding ''teaching'' volumes. The teaching volume for a polyp contains a 3D Gaussian distribution, and that for a RT contains zeros for enhancement of polyps and suppression of RTs, respectively. For distinction between polyps and nonpolyps including RTs, a 3D scoring method based on a 3D Gaussian weighting function is applied to the output of the trained 3D MTANN. Our database consisted of CTC examinations of 73 patients, scanned in both supine and prone positions (146 CTC data sets in total), with optical colonoscopy as a reference standard for the presence of polyps. Fifteen patients had 28 polyps, 15 of which were 5-9 mm and 13 were 10-25 mm in size. These CTC cases were subjected to our previously reported CAD scheme that included centerline-based segmentation of the colon, shape-based detection of polyps, and reduction of FPs by use of a Bayesian neural network based on geometric and texture

  5. Speckle reduction process based on digital filtering and wavelet compounding in optical coherence tomography for dermatology

    Science.gov (United States)

    Gómez Valverde, Juan J.; Ortuño, Juan E.; Guerra, Pedro; Hermann, Boris; Zabihian, Behrooz; Rubio-Guivernau, José L.; Santos, Andrés.; Drexler, Wolfgang; Ledesma-Carbayo, Maria J.

    2015-07-01

    Optical Coherence Tomography (OCT) has shown a great potential as a complementary imaging tool in the diagnosis of skin diseases. Speckle noise is the most prominent artifact present in OCT images and could limit the interpretation and detection capabilities. In this work we propose a new speckle reduction process and compare it with various denoising filters with high edge-preserving potential, using several sets of dermatological OCT B-scans. To validate the performance we used a custom-designed spectral domain OCT and two different data set groups. The first group consisted in five datasets of a single B-scan captured N times (with N<20), the second were five 3D volumes of 25 Bscans. As quality metrics we used signal to noise (SNR), contrast to noise (CNR) and equivalent number of looks (ENL) ratios. Our results show that a process based on a combination of a 2D enhanced sigma digital filter and a wavelet compounding method achieves the best results in terms of the improvement of the quality metrics. In the first group of individual B-scans we achieved improvements in SNR, CNR and ENL of 16.87 dB, 2.19 and 328 respectively; for the 3D volume datasets the improvements were 15.65 dB, 3.44 and 1148. Our results suggest that the proposed enhancement process may significantly reduce speckle, increasing SNR, CNR and ENL and reducing the number of extra acquisitions of the same frame.

  6. Reduction of cyanogenic glycosides by extrusion - influence of temperature and moisture content of the processed material

    Directory of Open Access Journals (Sweden)

    Čolović Dušica S.

    2015-01-01

    Full Text Available Тhe paper presents results of the investigation of the influence of extrusion temperature and moisture content of treated material on the reduction of cyanogenic glycosides (CGs in linseed-based co-extrudate. CGs are the major limitation of the effective usage of linseed in animal nutrition. Hence, some technological process must be applied for detoxification of linseed before its application as a nutrient. Extrusion process has demonstrated several advantages in reducing the present CGs, since it combines the influences of heating, shearing, high pressure, mixing, etc. According to obtained results, the increase in both temperature and moisture content of the starting mixture decreased the content of CGs in the processed material. HCN content, as a measurement of GCs presence, ranged from 25.42 mg/kg, recorded at the moisture content of 11.5%, to 126 mg/kg, detected at the lowest moisture content of 7%. It seems that moisture content and temperature had the impact on HCN content of equal importance. However, the influence of extrusion parameters other than temperature and moisture content could not be neglected. Therefore, the impact of individual factors has to be tested together. [Projekat Ministarstva nauke Republike Srbije, br. III 46012

  7. Effect of coffee reduction on constituent concentration in an energy-efficient process of ultrasonic extraction

    Directory of Open Access Journals (Sweden)

    Wang Cheng-Chi

    2015-01-01

    Full Text Available Coffee is one of the popular beverage; its constituents include caffeine, oxidation resistant aromatic constituents, protein, tannin, and fat. It is indicated in literatures that a proper amount of coffee stimulates the brain and enhances memory, but excessive coffee causes negative results, such as coronary artery disease, high blood pressure, heart disease and kidney disease. This study used high-performance ultrasonic process to discuss the effect of pulverized coffee reduction on the constituent concentration. It further compared the constituent concentrations obtained in different extraction periods. The experimental results show that the coffee aroma constituents can be extracted effectively by ultrasonic process without any organic solvent, and the constituent concentration does not decrease with the addition of pulverized coffee. Therefore, the consumption of pulverized coffee can be reduced greatly by using the proposed. The time of extraction process can be shortened, so as to save energy. The most important point is to reduce the enterprises manufacturing cost and to increase the profit.

  8. Impact of Noise Reduction Algorithm in Cochlear Implant Processing on Music Enjoyment.

    Science.gov (United States)

    Kohlberg, Gavriel D; Mancuso, Dean M; Griffin, Brianna M; Spitzer, Jaclyn B; Lalwani, Anil K

    2016-06-01

    Noise reduction algorithm (NRA) in speech processing strategy has positive impact on speech perception among cochlear implant (CI) listeners. We sought to evaluate the effect of NRA on music enjoyment. Prospective analysis of music enjoyment. Academic medical center. Normal-hearing (NH) adults (N = 16) and CI listeners (N = 9). Subjective rating of music excerpts. NH and CI listeners evaluated country music piece on three enjoyment modalities: pleasantness, musicality, and naturalness. Participants listened to the original version and 20 modified, less complex versions created by including subsets of musical instruments from the original song. NH participants listened to the segments through CI simulation and CI listeners listened to the segments with their usual speech processing strategy, with and without NRA. Decreasing the number of instruments was significantly associated with increase in the pleasantness and naturalness in both NH and CI subjects (p  0.05): this was true for the original and the modified music segments with one to three instruments (p > 0.05). NRA does not affect music enjoyment in CI listener or NH individual with CI simulation. This suggests that strategies to enhance speech processing will not necessarily have a positive impact on music enjoyment. However, reducing the complexity of music shows promise in enhancing music enjoyment and should be further explored.

  9. In-camera video-stream processing for bandwidth reduction in web inspection

    Science.gov (United States)

    Jullien, Graham A.; Li, QiuPing; Hajimowlana, S. Hossain; Morvay, J.; Conflitti, D.; Roberts, James W.; Doody, Brian C.

    1996-02-01

    Automated machine vision systems are now widely used for industrial inspection tasks where video-stream data information is taken in by the camera and then sent out to the inspection system for future processing. In this paper we describe a prototype system for on-line programming of arbitrary real-time video data stream bandwidth reduction algorithms; the output of the camera only contains information that has to be further processed by a host computer. The processing system is built into a DALSA CCD camera and uses a microcontroller interface to download bit-stream data to a XILINXTM FPGA. The FPGA is directly connected to the video data-stream and outputs data to a low bandwidth output bus. The camera communicates to a host computer via an RS-232 link to the microcontroller. Static memory is used to both generate a FIFO interface for buffering defect burst data, and for off-line examination of defect detection data. In addition to providing arbitrary FPGA architectures, the internal program of the microcontroller can also be changed via the host computer and a ROM monitor. This paper describes a prototype system board, mounted inside a DALSA camera, and discusses some of the algorithms currently being implemented for web inspection applications.

  10. TRAINING DURING ISO 9001 IMPLEMENTATION AND WORKERS INVOLVEMENT INTO THE QUALITY MANAGEMENT PROCESS IN MONTENEGRO

    Directory of Open Access Journals (Sweden)

    Marc-Arthur Diaye

    2009-03-01

    Full Text Available According to several researchers, workers involvement into the implementation of a quality system in a firm is a key of its success. Since training can improve workers involvement during the implementation of a quality system in a firm, we try in this paper to evaluate quantitatively in the case of Montenegro, the impact of training of workers' involvement. Using an original data set about two leading firms from Montenegro, we show that the coefficient associated with the training variable is on average about -1.44 and is significant at a level of 1%. That is workers who are not trained during the ISO 9001 implementation are strongly less involved into the quality management process of their firms.

  11. Nitric-glycolic flowsheet reduction/oxidation (redox) model for the defense waste processing facility (DWPF)

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Williams, M. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Trivelpiece, C. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Ramsey, W. G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-14

    Control of the REDuction/OXidation (REDOX) state of glasses containing high concentrations of transition metals, such as High Level Waste (HLW) glasses, is critical in order to eliminate processing difficulties caused by overly reduced or overly oxidized melts. Operation of a HLW melter at Fe+2/ΣFe ratios of between 0.09 and 0.33, retains radionuclides in the melt and thus the final glass. Specifically, long-lived radioactive 99Tc species are less volatile in the reduced Tc4+ state as TcO2 than as NaTcO4 or Tc2O7, and ruthenium radionuclides in the reduced Ru4+ state are insoluble RuO2 in the melt which are not as volatile as NaRuO4 where the Ru is in the +7 oxidation state. Similarly, hazardous volatile Cr6+ occurs in oxidized melt pools as Na2CrO4 or Na2Cr2O7, while the Cr+3 state is less volatile and remains in the melt as NaCrO2 or precipitates as chrome rich spinels. The melter REDOX control balances the oxidants and reductants from the feed and from processing additives such as antifoam.

  12. Spectral OCT with speckle contrast reduction for evaluation of the healing process after PRK and transepithelial PRK

    OpenAIRE

    Kaluzny, Bartlomiej J.; Szkulmowski, Maciej; Bukowska, Danuta M.; Wojtkowski, Maciej

    2014-01-01

    We evaluate Spectral OCT (SOCT) with a speckle contrast reduction technique using resonant scanner for assessment of corneal surface changes after excimer laser photorefractive keratectomy (PRK) and we compare healing process between conventional PRK and transepithelial PRK. The measurements were performed before and after the surgery. Obtained results show that SOCT with a resonant scanner speckle contrast reduction is capable of providing information regarding the healing process after PRK....

  13. Numerical magnitude processing in abacus-trained children with superior mathematical ability: an EEG study.

    Science.gov (United States)

    Huang, Jian; Du, Feng-lei; Yao, Yuan; Wan, Qun; Wang, Xiao-Song; Chen, Fei-Yan

    2015-08-01

    Distance effect has been regarded as the best established marker of basic numerical magnitude processes and is related to individual mathematical abilities. A larger behavioral distance effect is suggested to be concomitant with lower mathematical achievement in children. However, the relationship between distance effect and superior mathematical abilities is unclear. One could get superior mathematical abilities by acquiring the skill of abacus-based mental calculation (AMC), which can be used to solve calculation problems with exceptional speed and high accuracy. In the current study, we explore the relationship between distance effect and superior mathematical abilities by examining whether and how the AMC training modifies numerical magnitude processing. Thus, mathematical competencies were tested in 18 abacus-trained children (who accepted the AMC training) and 18 non-trained children. Electroencephalography (EEG) waveforms were recorded when these children executed numerical comparison tasks in both Arabic digit and dot array forms. We found that: (a) the abacus-trained group had superior mathematical abilities than their peers; (b) distance effects were found both in behavioral results and on EEG waveforms; (c) the distance effect size of the average amplitude on the late negative-going component was different between groups in the digit task, with a larger effect size for abacus-trained children; (d) both the behavioral and EEG distance effects were modulated by the notation. These results revealed that the neural substrates of magnitude processing were modified by AMC training, and suggested that the mechanism of the representation of numerical magnitude for children with superior mathematical abilities was different from their peers. In addition, the results provide evidence for a view of non-abstract numerical representation.

  14. Waste reduction algorithm used as the case study of simulated bitumen production process

    Directory of Open Access Journals (Sweden)

    Savić Marina A.

    2011-01-01

    Full Text Available Waste reduction algorithm - WAR is a tool helping process engineers for environmental impact assessment. WAR algorithm is a methodology for determining the potential environmental impact (PEI of a chemical process. In particular, the bitumen production process was analyzed following three stages: a atmospheric distillation unit, b vacuum distillation unit, and c bitumen production unit. Study was developed for the middle sized oil refinery with capacity of 5000000 tones of crude oil per year. Results highlight the most vulnerable aspects of the environmental pollution that arise during the manufacturing process of bitumen. The overall rates of PEI leaving the system (PEI/h - Iout PEI/h are: a 2.14105, b 7.17104 and c 2.36103, respectively. The overall rates of PEI generated within the system - Igen PEI/h are: a 7.75104, b -4.31104 and c -4.32102, respectively. Atmospheric distillation unit have the highest overall rate of PEI while the bitumen production unit have the lowest overall rate of PEI. Comparison of Iout PEI/h and Igen PEI/h values for the atmospheric distillation unit, shows that the overall rate of PEI generated in the system is 36.21% of the overall rate of PEI leaving the system. In the cases of vacuum distillation and bitumen production units, the overall rate of PEI generated in system have negative values, i.e. the overall rate of PEI leaving the system is reduced at 60.11% (in the vacuum distillation unit and at 18.30% (in the bitumen production unit. Analysis of the obtained results for the overall rate of PEI, expressed by weight of the product, confirms conclusions.

  15. Treatment and toxicity reduction of textile dyeing wastewater using the electrocoagulation-electroflotation process.

    Science.gov (United States)

    Kim, Han-Lae; Cho, Jong-Bok; Park, Yong-Jin; Cho, Il-Hyoung

    2016-07-02

    A pilot-scale study was conducted using the electrocoagulation-electroflotation (EC-EF) process to treat textile dyeing raw wastewater to evaluate treatment performance. The effects of some key factors, such as current density, hydraulic retention time (HRT), and removal of conductivity, total suspended solids (TSS), chemical oxygen demand (COD), and color were investigated. The operating variables were current density of 0-300 A m(-2), HRT of 0-30 min, and a coagulant (anionic polyacrylamide (A-PAM)) dosage of 0-30 mg L(-1). Daphnia magna was used to test acute toxicity in raw and treated wastewater. Under the operating conditions without added coagulant, maxima of 51%, 88%, 84%, and 99% of conductivity, TSS, COD, and color were removed, respectively, with a HRT of 30 min. The coagulant enhanced removal of all wastewater parameters. Removal maxima of 59%, 92%, 94%, and 98% for conductivity, TSS, COD, and color were observed, respectively, with an optimal dosage of 30 mg L(-1) and a shortened HRT of 20 min. The 48 h-LC50 D. magna test showed that the raw wastewater was highly toxic. However, the EC-EF process decreased toxicity of the treated samples significantly, and >70% toxicity reduction was achieved by the EC-EF process with the addition of 15-30 mg L(-1) coagulant, HRT of 20 min, and current density of 150-300 A m(-2). The pilot scale test (0.3 m(3 )h(-1)) shows that the EC-EF process with added coagulant effectively treated textile dyeing wastewater.

  16. Processing plutonium-contaminated soild for volume reduction using the segmented gate system

    International Nuclear Information System (INIS)

    Moroney, K.S.; Moroney, J.D.; Turney, J.M.; Doane, R.W.

    1994-01-01

    TMA/Eberline has developed and demonstrated an effective method for removing mixed plutonium and americium contamination from a coral soil matrix at the Defense Nuclear Agency's Johnston Atoll site. TMA's onsite soil processing for volume reduction is ongoing at a rate of over 2000 metric tons per week. The system uses arrays of sensitive radiation detectors coupled with sophisticated computer software developed by Eberline Instrument Corporation. The proprietary software controls four soil sorting units operating in parallel that utilize TMA's unique Segmented Gate System technology to remove radiologically contaminated soil from a moving supply on conveyor belts. Clean soil is released for use elsewhere on the island. Contaminated soil is diverted to either a metal drum for collecting higher activity open-quotes hotclose quotes particles (>5000 Becquerels), or to a supplementary soil washing process designed to remove finely divided particles of dispersed low level contamination. Site contamination limits specify maximum dispersed radioactivity of no more than 500 Becquerels per kilogram of soil averaged over no more than 0.1 cubic meter. Results of soil processing at this site have been excellent. After processing over 50,000 metric tons, the volume of contaminated material that would have required expensive special handling, packaging, and disposal as radioactive waste has been successfully reduced by over 98 percent. By mid-January 1994, nearly three million kiloBecquerels of plutonium/americium contamination had been physically separated from the contaminated feed by TMA's Segmented Gate System, and quality control sampling showed no radioactivity above release criteria in the open-quotes cleanclose quotes soil pile

  17. Brain training game improves executive functions and processing speed in the elderly: a randomized controlled trial.

    Science.gov (United States)

    Nouchi, Rui; Taki, Yasuyuki; Takeuchi, Hikaru; Hashizume, Hiroshi; Akitsuki, Yuko; Shigemune, Yayoi; Sekiguchi, Atsushi; Kotozaki, Yuka; Tsukiura, Takashi; Yomogida, Yukihito; Kawashima, Ryuta

    2012-01-01

    The beneficial effects of brain training games are expected to transfer to other cognitive functions, but these beneficial effects are poorly understood. Here we investigate the impact of the brain training game (Brain Age) on cognitive functions in the elderly. Thirty-two elderly volunteers were recruited through an advertisement in the local newspaper and randomly assigned to either of two game groups (Brain Age, Tetris). This study was completed by 14 of the 16 members in the Brain Age group and 14 of the 16 members in the Tetris group. To maximize the benefit of the interventions, all participants were non-gamers who reported playing less than one hour of video games per week over the past 2 years. Participants in both the Brain Age and the Tetris groups played their game for about 15 minutes per day, at least 5 days per week, for 4 weeks. Each group played for a total of about 20 days. Measures of the cognitive functions were conducted before and after training. Measures of the cognitive functions fell into four categories (global cognitive status, executive functions, attention, and processing speed). Results showed that the effects of the brain training game were transferred to executive functions and to processing speed. However, the brain training game showed no transfer effect on any global cognitive status nor attention. Our results showed that playing Brain Age for 4 weeks could lead to improve cognitive functions (executive functions and processing speed) in the elderly. This result indicated that there is a possibility which the elderly could improve executive functions and processing speed in short term training. The results need replication in large samples. Long-term effects and relevance for every-day functioning remain uncertain as yet. UMIN Clinical Trial Registry 000002825.

  18. Brain training game improves executive functions and processing speed in the elderly: a randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Rui Nouchi

    Full Text Available The beneficial effects of brain training games are expected to transfer to other cognitive functions, but these beneficial effects are poorly understood. Here we investigate the impact of the brain training game (Brain Age on cognitive functions in the elderly.Thirty-two elderly volunteers were recruited through an advertisement in the local newspaper and randomly assigned to either of two game groups (Brain Age, Tetris. This study was completed by 14 of the 16 members in the Brain Age group and 14 of the 16 members in the Tetris group. To maximize the benefit of the interventions, all participants were non-gamers who reported playing less than one hour of video games per week over the past 2 years. Participants in both the Brain Age and the Tetris groups played their game for about 15 minutes per day, at least 5 days per week, for 4 weeks. Each group played for a total of about 20 days. Measures of the cognitive functions were conducted before and after training. Measures of the cognitive functions fell into four categories (global cognitive status, executive functions, attention, and processing speed. Results showed that the effects of the brain training game were transferred to executive functions and to processing speed. However, the brain training game showed no transfer effect on any global cognitive status nor attention.Our results showed that playing Brain Age for 4 weeks could lead to improve cognitive functions (executive functions and processing speed in the elderly. This result indicated that there is a possibility which the elderly could improve executive functions and processing speed in short term training. The results need replication in large samples. Long-term effects and relevance for every-day functioning remain uncertain as yet.UMIN Clinical Trial Registry 000002825.

  19. Toxicity Reduction of Reactive Red Dye-238 Using Advanced Oxidation Process by Solar Energy

    Directory of Open Access Journals (Sweden)

    Riyad Al-Anbari

    2017-09-01

    Full Text Available Decolorization of red azo dye (Cibacron Red FN-R from synthetic wastewater has been investigated as a function of solar advanced oxidation process. The photocatalytic activity using ZnO as a photocatalysis has been estimated. Different parameters affected the removal efficiency, including pH of the solution, initial dye concentration and H2O2 concentration were evaluated to find out the optimum value of these parameters. The results proved that the optimal pH value was 8 and the most efficient H2O2 concentration was 100mg/L. Toxicity reduction percent for effluent solution was also monitored to assess the degradation process. This treatment method was able to strongly reduce the color and toxicity of reactive red dye-238 to about (99 and 80 % respectively. It can be concluded, from these experiments, that the using of ZnO as a photocatalysis was exhibited as economical and efficient treatment method to remove reactive red dye-238 from aqueous solution.

  20. The development of high hydrostatic pressure processes as an alternative to other pathogen reduction methods.

    Science.gov (United States)

    Demazeau, G; Rivalain, N

    2011-06-01

    In biology, scientist's interest for high hydrostatic pressure (HHP) has increased over the last 20 years, for both research and industrial developments, mainly because of the low energy associated with its application in liquid phase and its capacity to inactivate pathogens. It is now considered as an interesting alternative to heat treatments for the inactivation of contaminants in many products, from foods to pharmaceutical preparations. This last statement implies different objectives according to the type of product. The therapeutic properties of pharmaceutical preparations or other biological media of physiological importance are in general associated with specific and well-defined molecules such as proteins. Their activity mainly depends on their spatial conformation, maintained by weak chemical bonds that are often pressure sensitive. In this case, the optimization of a HHP process can be more complex than for foods, for which the organoleptic molecules are less pressure sensitive, and the evaluation of their preservation is more subjective and highly dependent on the consumers acceptance. The objective of this review is therefore to underline how, even if the basic concept for the optimization of a pathogen reduction process using HHP is the same whatever the product, major differences arise from the product itself and its final use. © 2011 The Authors. Journal of Applied Microbiology © 2011 The Society for Applied Microbiology.

  1. A catalytic wet oxidation process for mixed waste volume reduction/recycling

    International Nuclear Information System (INIS)

    Dhooge, Patrick M.

    1992-01-01

    Mixed wastes have presented a challenge to treatment and destruction technologies. A recently developed catalytic wet oxidation method has promising characteristics for volume reduction and recycling of mixed wastes. The process utilizes iron (III) as an oxidant in the presence of homogeneous cocatalysts which increase organics' oxidation rates and the rate of oxidation of iron (II) by oxygen. The reaction is conducted in an aqueous mineral acid solution at temperatures of 373 - 573 deg K. The mineral acid should solvate a number of heavy metals, including U and Pu. Studies of reaction rates show that the process can oxidize a wide range of organic compounds including aromatics and chlorinated hydrocarbons. Rate constants in the range of 10 -7 to 10 -4 sec -1 , depending on the cocatalyst, acidity, type of anions, type of organic, temperature, and time. Activation energies ranged from 25. to 32. KJ/mole. Preliminary measurements of the extent of oxidation which could be obtained ranged from 80% for trichloroethylene to 99.8% for 1,2,4-trimethylbenzene; evidence was obtained that absorption by the fluorocarbon liners of the reaction bombs allowed some of the organics to escape exposure to the catalyst solution. The results indicate that complete oxidation of the organics used here, and presumably many others, can be achieved. (author)

  2. Maximized liquid radwaste volume reduction through a total integrated process: A new technology success story

    International Nuclear Information System (INIS)

    Rae, G.A.

    1996-01-01

    A fundamental nuclear industry goal is the minimization of the generation of radioactive waste. This goal has been dramatically reinforced over the past few years due to the spiraling increased costs of both commercial and DOE disposal. To assist in meeting these goals and reducing the industry's costs, NUKEM initiated a new technology program to maximize the reduction of liquid radwaste through the use of a systematic approach or TIPS (Total Integrated Process System). This concept evaluates the total life cycle of various technologies in a combination that results in the final waste form being minimized to the pure solids content of the waste stream. Additionally, it allows for a final waste form that maximizes the utilization of the waste package and is conditioned to be readily acceptable to additional processing to meet new waste form requirements at future disposal sites, should interim storage of the waste be required. The TIPS, although first introduced at commercial facilities, has broad applications for DOE's liquid waste streams

  3. Nonlinear system identification of the reduction nickel oxide smelting process in electric arc furnace

    Science.gov (United States)

    Gubin, V.; Firsov, A.

    2018-03-01

    As the title implies the article describes the nonlinear system identification of the reduction smelting process of nickel oxide in electric arc furnaces. It is suggested that for operational control ratio of components of the charge must be solved the problem of determining the qualitative composition of the melt in real time. The use of 0th harmonic of phase voltage AC furnace as an indirect measure of the melt composition is proposed. Brief description of the mechanism of occurrence and nature of the non-zero 0th harmonic of the AC voltage of the arc is given. It is shown that value of 0th harmonic of the arc voltage is not function of electrical parameters but depends of the material composition of the melt. Processed industrial data are given. Hammerstein-Wiener model is used for description of the dependence of 0th harmonic of the furnace voltage from the technical parameters of melting furnace: the melt composition and current. Recommendations are given about the practical use of the model.

  4. Dimension reduction of Karhunen-Loeve expansion for simulation of stochastic processes

    Science.gov (United States)

    Liu, Zhangjun; Liu, Zixin; Peng, Yongbo

    2017-11-01

    Conventional Karhunen-Loeve expansions for simulation of stochastic processes often encounter the challenge of dealing with hundreds of random variables. For breaking through the barrier, a random function embedded Karhunen-Loeve expansion method is proposed in this paper. The updated scheme has a similar form to the conventional Karhunen-Loeve expansion, both involving a summation of a series of deterministic orthonormal basis and uncorrelated random variables. While the difference from the updated scheme lies in the dimension reduction of Karhunen-Loeve expansion through introducing random functions as a conditional constraint upon uncorrelated random variables. The random function is expressed as a single-elementary-random-variable orthogonal function in polynomial format (non-Gaussian variables) or trigonometric format (non-Gaussian and Gaussian variables). For illustrative purposes, the simulation of seismic ground motion is carried out using the updated scheme. Numerical investigations reveal that the Karhunen-Loeve expansion with random functions could gain desirable simulation results in case of a moderate sample number, except the Hermite polynomials and the Laguerre polynomials. It has the sound applicability and efficiency in simulation of stochastic processes. Besides, the updated scheme has the benefit of integrating with probability density evolution method, readily for the stochastic analysis of nonlinear structures.

  5. Technology Roadmap: Energy and GHG reductions in the chemical industry via catalytic processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    The chemical industry is a large energy user; but chemical products and technologies also are used in a wide array of energy saving and/or renewable energy applications so the industry has also an energy saving role. The chemical and petrochemical sector is by far the largest industrial energy user, accounting for roughly 10% of total worldwide final energy demand and 7% of global GHG emissions. The International Council of Chemical Associations (ICCA) has partnered with the IEA and DECHEMA (Society for Chemical Engineering and Biotechnology) to describe the path toward further improvements in energy efficiency and GHG reductions in the chemical sector. The roadmap looks at measures needed from the chemical industry, policymakers, investors and academia to press on with catalysis technology and unleash its potential around the globe. The report uncovers findings and best practice opportunities that illustrate how continuous improvements and breakthrough technology options can cut energy use and bring down greenhouse gas (GHG) emission rates. Around 90% of chemical processes involve the use of catalysts – such as added substances that increase the rate of reaction without being consumed by it – and related processes to enhance production efficiency and reduce energy use, thereby curtailing GHG emission levels. This work shows an energy savings potential approaching 13 exajoules (EJ) by 2050 – equivalent to the current annual primary energy use of Germany.

  6. THE USAGE OF CLOUD SERVICES IN THE PROCESS OF PROFESSIONAL TRAINING OF PROGRAMMERS AT HIGHER EDUCATIONAL INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Spirin O.

    2017-12-01

    Full Text Available In the article the state of the art and the main tendencies of cloud computing development are analyzed. The importance of cloud technologies application in education is grounded. The directions of their appliance are examined in higher education, in particular as for the creation of the cloud-oriented learning scientific environment at educational institutions. The advantages of transfer of IT-infrastructure of higher educational institutions into the cloud form are shown (the economy of funds for purchase of software and renovation of computer database; the reduction of the need for specially equipped premises; the creation of an open educational environment. The main directions of the research study of cloud technologies application in the process of professional training of programmers are characterized, among them there are: 1 formation of skills of the cloud services use for the professional tasks solving; 2 formation of skills of the development of cloud applications, deployment of cloud infrastructure, cloud applications and data bases security support. The description of cloud services that can be used in the process of programming learning and usage of training projects (Ideone, Codenvy, DbDesigner are provided. The brief description of the possibilities of the Amazon platform usage for formation of cloud software development skills is provided.

  7. Materials of the Regional Training Course on Validation and Process Control for Electron Beam Radiation Processing

    International Nuclear Information System (INIS)

    Kaluska, I.; Gluszewski, W.

    2007-01-01

    Irradiation with electron beams is used in the polymer industry, food, pharmaceutical and medical device industries for sterilization of surfaces. About 20 lectures presented during the Course were devoted to all aspects of control and validation of low energy electron beam processes. They should help the product manufacturers better understand the application of the ANSI/AAMI/ISO 11137 norm, which defines the requirements and standard practices for validation of the irradiation process and the process controls required during routine processing

  8. Construction training process of highly skilled players in mini-football for competition period

    Directory of Open Access Journals (Sweden)

    Stasiuk I.I.

    2013-08-01

    Full Text Available Analyzed the structure and content of the competition period in mini-football. It was determined that the structure of the competition period consists of 4 competitive mesocycles. In each mesocycle includes various types of micro-cycles (competitive, cross-game and rehabilitation. Reflects the ratio of specific and non-specific (general preparations means training work. So in the competitive period for competitive mesocycles general preparations exercises ranged from 38.3 to 42.4%, special-preparation - from 29.9 to 32.6%, competitive - from 20.9 to 23.3%. The intensity of the training load in intergame microcycles less than competitive. This corresponds to the strategy of building the training process in the competitive period. During the competition period the ratio of the training load was: aerobic focus - 49.2%, mixed - 46.1%, anaerobic alactate - 2.4%, anaerobic glycolytic - 2.3%. Defines the scope and focus of the training load: longer the aerobic work, then - mixed, anaerobic- alactate and anaerobic-glycolytic. The comparative characteristics of the intensity of the training load in competitive and intergame microcycles.

  9. Developing a Business Intelligence Process for a Training Module in SharePoint 2010

    Science.gov (United States)

    Schmidtchen, Bryce; Solano, Wanda M.; Albasini, Colby

    2015-01-01

    Prior to this project, training information for the employees of the National Center for Critical Processing and Storage (NCCIPS) was stored in an array of unrelated spreadsheets and SharePoint lists that had to be manually updated. By developing a content management system through a web application platform named SharePoint, this training system is now highly automated and provides a much less intensive method of storing training data and scheduling training courses. This system was developed by using SharePoint Designer and laying out the data structure for the interaction between different lists of data about the employees. The automation of data population inside of the lists was accomplished by implementing SharePoint workflows which essentially lay out the logic for how data is connected and calculated between certain lists. The resulting training system is constructed from a combination of five lists of data with a single list acting as the user-friendly interface. This interface is populated with the courses required for each employee and includes past and future information about course requirements. The employees of NCCIPS now have the ability to view, log, and schedule their training information and courses with much more ease. This system will relieve a significant amount of manual input and serve as a powerful informational resource for the employees of NCCIPS in the future.

  10. Improving everyday prospective memory performance in older adults: comparing cognitive process and strategy training.

    Science.gov (United States)

    Brom, Sarah Susanne; Kliegel, Matthias

    2014-09-01

    Considering the importance of prospective memory for independence in old age recently, research has started to examine interventions to reduce prospective memory errors. Two general approaches can be proposed: (a) process training of executive control associated with prospective memory functioning, and/or (b) strategy training to reduce executive task demands. The present study was the first to combine and compare both training methods in a sample of 62 community-dwelling older adults (60-86 years) and to explore their effects on an ecologically valid everyday life prospective memory task (here: regular blood pressure monitoring). Even though the training of executive control was successful in enhancing the trained ability, clear transfer effects on prospective memory performance could only be found for the strategy training. However, participants with low executive abilities benefited particularly from the implementation intention strategy. Conceptually, this supports models suggesting interactions between task demands and individual differences in executive control in explaining individual differences in prospective memory performance. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  11. Outline of the Therapeutic Process in Social Skills Training with Socially Dysfunctional Patients.

    Science.gov (United States)

    Stravynski, Ariel; And Others

    1987-01-01

    Outlines the therapeutic process in social skills training with 22 socially dysfunctional outpatients who met Diagnostic and Statistical Manual of Mental Disorders criteria for avoidant personality disorder. Measured performance of prosocial target behaviors and associated subjective anxiety during baseline, treatment, and follow-up periods.…

  12. Foreign Experience in Training Future Engineering Educators for Modeling Technological Processes

    Science.gov (United States)

    Bokhonko, Yevhen

    2017-01-01

    The article deals with the study of foreign experience in training engineering educators for modeling technological processes. It has been stated that engineering education is a field that is being dramatically developed taking into account the occurring changes in educational paradigms, global higher education space, national higher education…

  13. Forming Professional Mobility in the Process of Future Master Philologists' Training in Ukraine and Abroad

    Science.gov (United States)

    Semenog, Olena

    2016-01-01

    On the basis of scientific research, the experience of higher education institutions in Ukraine and abroad (the USA, the Swiss Confederation) concerning the forming of future philologists' professional mobility in the process of Master training has been generalized. It has been overviewed, that professional mobility is an essential indicator of…

  14. Educational Data Processing Directors' Perceptions of Technological Training Priorities for School Administrators.

    Science.gov (United States)

    Bozeman, W. C.; Spuck, D. W.

    Results of a survey of school district data processing directors' attitudes toward the content of technology curriculum in educational administrator training programs are presented in this paper. Questionnaires sent to 152 large school districts yielded 78 usable returns, a 51 percent response rate. Respondents rated the following topics as most…

  15. Evaluation of patient wristbands and patient identification process in a training hospital in Turkey.

    Science.gov (United States)

    Cengiz, Canan; Celik, Yusuf; Hikmet, Neset

    2016-10-10

    Purpose The purpose of this paper is to evaluate the utilisation of patient wristbands (PWs) and patient identification (PI) process in a training hospital in Ankara, Turkey. Design/methodology/approach This descriptive and cross-sectional study was conducted in a training hospital with 640 beds, accreditied by Joint Commission International. The views of 348 patients and 419 hospital personnel on the implementation of patient wristbands and identification process were evaluated. Findings The results indicated that lack of information among patients about the importance of PWs and the misknowledge among staff participants on when, where, and by whom PWs should be put on and verified were the weakest points in this hospital. Research limitations/implications PI process must be strictly implemented according to the standard procedures of patient safety. Both patients and hospital personnel should be trained continuously, and training sessions must be held to increase their awareness about the importance of PWs and identification process. Practical implications Finding new ways and using new methods for increasing knowledge about PI and PWs are necessary. Hospital management should prepare a written PI and PW policy and procedure documents by taking the views of patients and hospital personnel and share these with them. Originality/value This study incorporates the views and attitudes of patients and health care personnel in improving health care quality by increasing awareness about PI and wristbands.

  16. Aerobic Exercise Training in Post-Polio Syndrome: Process Evaluation of a Randomized Controlled Trial

    NARCIS (Netherlands)

    Voorn, Eric L.; Koopman, Fieke S.; Brehm, Merel A.; Beelen, Anita; de Haan, Arnold; Gerrits, Karin H. L.; Nollet, Frans

    2016-01-01

    To explore reasons for the lack of efficacy of a high intensity aerobic exercise program in post-polio syndrome (PPS) on cardiorespiratory fitness by evaluating adherence to the training program and effects on muscle function. A process evaluation using data from an RCT. Forty-four severely fatigued

  17. Exploring the Critical Role of Motivation to Transfer in the Training Transfer Process

    Science.gov (United States)

    Grohmann, Anna; Beller, Johannes; Kauffeld, Simone

    2014-01-01

    The present study aims at exploring the critical role of motivation to transfer within the training transfer process. In a sample of N?=?252 employees of one industrial company, one peer rating and several self-ratings of transfer were used to investigate the mediating role of motivation to transfer in the relationship between training…

  18. The Professional Competence Formation in the Training Process in Higher Educational Institution

    Science.gov (United States)

    Burganova, Roza I.; Abdugalina, Sairan E.; Shaiheslyamova, Kazyna O.

    2016-01-01

    The article is devoted to the problem of professional competence formation in the specialists' training process at the university in contemporary socio-economic and socio-cultural conditions originating in the Republic of Kazakhstan. The emphasis is laid on new scientific and pedagogical approaches to its solution. Special attention is paid to the…

  19. Community Learning Process: A Model of Solid Waste Reduction and Separation

    Directory of Open Access Journals (Sweden)

    Jittree Pothimamaka

    2008-07-01

    Full Text Available The main purpose of this research was to study and develop an appropriate model of waste reduction and separation in the community under the community learning process. This is a research and development (R&D study with mixed methodology consisting of four steps. Step One: Research was conducted to obtain information on solid waste disposal in Bang Sue District, Bangkok Metropolis, Thailand, employing group discussions with community members and data collection from the field. Step Two: The activities for development of the model consisted of group discussions, workshops, and development of a test of knowledge and behaviors concerning solid waste disposal using the 1A3R practice concept. Step Three : Experimentation with the model consisting of pre testing and post testing of knowledge and behaviors concerning solid waste disposal ; door to door imparting of appropriate knowledge and behaviors concerning solid waste disposal ; and collecting of data on the rate and amount of generated waste, and waste separation. Step Four: Evaluation of the developed model consisting of assessments based on physical indicators of the waste, opinions of experts, and impacts on participating communities. The findings revealed that (1 the post experiment knowledge and behavior mean scores of community members in the sample significantly increased over their pre experiment counterparts; and (2 the rate of waste generation decreased while waste separation increased. The proposed model of solid waste reduction and separation was accepted, and has four main components:(1 Community Practice: solid waste should be separated in the household into three types: food waste, marketable waste and non marketable waste must be clearly separated from household waste.(2 Knowledge sharing: door to door imparting of knowledge and behaviors on solid waste reduction and separation based on the 1A3R practice concept should be promoted.(3 Community mastery: the community organization

  20. Investigation of Mercury Reduction in Gold Stripping Process at Elevated Temperature

    Science.gov (United States)

    Pramudya, Irawan

    Mercury is present in many gold ores. By processing these ores, there is a potential of emitting mercury to the environment. Carbon regeneration kiln stacks have been observed as one of the primary source of mercury emission into the atmosphere. Before it is recycled back into the carbon in leach (CIL) or carbon in columns (CIC), carbon used in the gold extraction process needs to be reactivated thermally. Emission of mercury can be minimized by keeping the mercury left in the carbon low before it goes to the carbon regeneration kiln stacks. The objective of this study is establishing the optimum elution conditions of mercury cyanide from loaded carbon (which includes the eluent, concentration, temperature and elution time) with respect to gold stripping. Several methods such as acid washing (UNR-100, HCl or ethanol/UNR-100) were investigated prior to the stripping process. Furthermore, conventional pressurized Zadra and modified Zadra were also studied with regards to mercury concentration in the solution and vapor state as well as maximizing the gold stripping from industrial loaded carbon. 7% UNR-100 acid washing of loaded carbon at 80°C was able to wash out approximately 90% of mercury while maintaining the gold adsorption on the carbon (selective washing). The addition of alcohol in the UNR-100 acid washing solution was able to enhance mercury washing from 90% to 97%. Furthermore, mercury stripping using conventional pressurized (cyanide-alkaline) Zadra was best performed at 80°C (minimal amount of mercury reduced and volatilized) whereas using the same process only 40% of gold was stripped, which makes this process not viable. When alcohol was added to the stripping solution, at 80°C, 95% of gold was detected in the solution while keeping the reduction and volatilization of mercury low. The outcome of this study provides a better understanding of mercury behavior during the acid washing and stripping processes so that the risk of mercury exposure and

  1. Attention training improves aberrant neural dynamics during working memory processing in veterans with PTSD.

    Science.gov (United States)

    McDermott, Timothy J; Badura-Brack, Amy S; Becker, Katherine M; Ryan, Tara J; Bar-Haim, Yair; Pine, Daniel S; Khanna, Maya M; Heinrichs-Graham, Elizabeth; Wilson, Tony W

    2016-12-01

    Posttraumatic stress disorder (PTSD) is associated with executive functioning deficits, including disruptions in working memory (WM). Recent studies suggest that attention training reduces PTSD symptomatology, but the underlying neural mechanisms are unknown. We used high-density magnetoencephalography (MEG) to evaluate whether attention training modulates brain regions serving WM processing in PTSD. Fourteen veterans with PTSD completed a WM task during a 306-sensor MEG recording before and after 8 sessions of attention training treatment. A matched comparison sample of 12 combat-exposed veterans without PTSD completed the same WM task during a single MEG session. To identify the spatiotemporal dynamics, each group's data were transformed into the time-frequency domain, and significant oscillatory brain responses were imaged using a beamforming approach. All participants exhibited activity in left hemispheric language areas consistent with a verbal WM task. Additionally, veterans with PTSD and combat-exposed healthy controls each exhibited oscillatory responses in right hemispheric homologue regions (e.g., right Broca's area); however, these responses were in opposite directions. Group differences in oscillatory activity emerged in the theta band (4-8 Hz) during encoding and in the alpha band (9-12 Hz) during maintenance and were significant in right prefrontal and right supramarginal and inferior parietal regions. Importantly, following attention training, these significant group differences were reduced or eliminated. This study provides initial evidence that attention training improves aberrant neural activity in brain networks serving WM processing.

  2. Using innovative instructional technology to meet training needs in public health: a design process.

    Science.gov (United States)

    Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

    2014-03-01

    Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

  3. Effectiveness of Gross Model-Based Emotion Regulation Strategies Training on Anger Reduction in Drug-Dependent Individuals and its Sustainability in Follow-up.

    Science.gov (United States)

    Massah, Omid; Sohrabi, Faramarz; A'azami, Yousef; Doostian, Younes; Farhoudian, Ali; Daneshmand, Reza

    2016-03-01

    Emotion plays an important role in adapting to life changes and stressful events. Difficulty regulating emotions is one of the problems drug abusers often face, and teaching these individuals to express and manage their emotions can be effective on improving their difficult circumstances. The present study aimed to determine the effectiveness of the Gross model-based emotion regulation strategies training on anger reduction in drug-dependent individuals. The present study had a quasi-experimental design wherein pretest-posttest evaluations were applied using a control group. The population under study included addicts attending Marivan's methadone maintenance therapy centers in 2012 - 2013. Convenience sampling was used to select 30 substance-dependent individuals undergoing maintenance treatment who were then randomly assigned to the experiment and control groups. The experiment group received its training in eight two-hour sessions. Data were analyzed using analysis of co-variance and paired t-test. There was significant reduction in anger symptoms of drug-dependent individuals after gross model based emotion regulation training (ERT) (P emotion regulation strategies training. Based on the results of this study, we may conclude that the gross model based emotion regulation strategies training can be applied alongside other therapies to treat drug abusers undergoing rehabilitation.

  4. Transfer of Training between Music and Speech: Common Processing, Attention, and Memory

    OpenAIRE

    Besson, Mireille; Chobert, Julie; Marie, Céline

    2011-01-01

    After a brief historical perspective of the relationship between language and music, we review our work on transfer of training from music to speech that aimed at testing the general hypothesis that musicians should be more sensitive than non-musicians to speech sounds. In light of recent results in the literature, we argue that when long-term experience in one domain influences acoustic processing in the other domain, results can be interpreted as common acoustic processing. But when long-te...

  5. Training processes in under 6s football competition: The transition from ingenuity to institutionalization

    OpenAIRE

    Abel Merino Orozco; Ana Arraiz Pérez; Fernando Sabirón Sierra

    2016-01-01

    Under 6s football competition is a school sport that has inherent educational implications. Moreover, it is a booming non-formal socio-educational framework where families and children lay training expectations and dreams. The aim is to comprehend the emerging learning processes promoted in this environment for 6 years-old children, when the child starts the institutionalization process in the ruled sport. The research uses a case study design, the ethnographic mode, through participant obser...

  6. Effects of oxidation reduction potential in the bypass micro-aerobic sludge zone on sludge reduction for a modified oxic-settling-anaerobic process.

    Science.gov (United States)

    Li, Kexun; Wang, Yi; Zhang, Zhongpin; Liu, Dongfang

    2014-01-01

    Batch experiments were conducted to determine the effect of oxidation reduction potential (ORP) on sludge reduction in a bypass micro-aerobic sludge reduction system. The system was composed of a modified oxic-settling-anaerobic process with a sludge holding tank in the sludge recycle loop. The ORPs in the micro-aerobic tanks were set at approximately +350, -90, -150, -200 and -250 mV, by varying the length of aeration time for the tanks. The results show that lower ORP result in greater sludge volume reduction, and the sludge production was reduced by 60% at the lowest ORP. In addition, low ORP caused extracellular polymer substances dissociation and slightly reduced sludge activity. Comparing the sludge backflow characteristics of the micro-aerobic tank's ORP controlled at -250 mV with that of +350 mV, the average soluble chemical oxygen (SCOD), TN and TP increased by 7, 0.4 and 2 times, median particle diameter decreased by 8.5 μm and the specific oxygen uptake rate (SOUR) decreased by 0.0043 milligram O2 per gram suspended solids per minute. For the effluent, SCOD and TN and TP fluctuated around 30, 8.7 and 0.66 mg/L, respectively. Therefore, the effective assignment of ORP in the micro-aerobic tank can remarkably reduce sludge volume and does not affect final effluent quality.

  7. Reduction of water consumption in the dynamic acid leaching process of uranium

    International Nuclear Information System (INIS)

    Chocron, M.; Arias, M.J.; Avato, A.M.; Díaz, V.A.

    2013-01-01

    In 2006 the Argentine state announced a plan to reactivate the nuclear sector. As a result of this decision, the National Atomic Energy Commission (CNEA) resumed its research in uranium mining for Argentine deposits. The first step was the study of the leaching process, mainly the dynamic leaching. In this work the influence of the reduction of the water content in the dynamic leaching process in acid medium, at laboratory scale and under batch operating conditions, on the main operating parameters (concentration of the leaching reagent, the oxidizing reagent and The reaction temperature). The percentages of pulp solids studied in the dynamic leaching were 53% and 66% w / w. For the tests uranium-molybdenum ores of the sandstone type were used. Two different working schemes were used to study the different operating parameters. In the tests carried out with 53% of solid in pulp, the parameters were studied individually (varying one parameter at a time), while working with a pulp of 66% solids, the study of the parameters was performed by a Factorial design of two levels of three variables, which in addition to studying the dependence of the different parameters allowed to analyze how they influence each other. During the leaching tests with 66% solids content in pulp, changes in the geometric and dynamic conditions of the system were necessary because of the poor mixing observed when using the same agitation conditions used in the leaching tests with 53% solids in pulp. When comparing the tests for both solids content conditions (53% and 66% w / w), similar extraction yields were observed for both uranium and molybdenum (more than 90% for uranium and more than 80% for The molybdenum). As a final result, the process water consumption (380 liters of water per ton of ore) is reduced by more than 50% by working with pulps of 66% w / w of solids, obtaining acceptable extraction yields and, as an additional, reducing The consumption of the leaching reagent. (author)

  8. The Impact of Environmental Complexity and Team Training on Team Processes and Performance in Multi-Team Environments

    National Research Council Canada - National Science Library

    Cobb, Marshall

    1999-01-01

    This study examined how manipulating the level of environmental complexity and the type of team training given to subject volunteers impacted important team process behaviors and performance outcomes...

  9. Effect of Process Changes in Surgical Training on Quantitative Outcomes From Surgery Residency Programs.

    Science.gov (United States)

    Dietl, Charles A; Russell, John C

    2016-01-01

    The purpose of this article is to review the literature on process changes in surgical training programs and to evaluate their effect on the Accreditation Council of Graduate Medical Education (ACGME) Core Competencies, American Board of Surgery In-Training Examination (ABSITE) scores, and American Board of Surgery (ABS) certification. A literature search was obtained from MEDLINE via PubMed.gov, ScienceDirect.com, Google Scholar on all peer-reviewed studies published since 2003 using the following search queries: surgery residency training, surgical education, competency-based surgical education, ACGME core competencies, ABSITE scores, and ABS pass rate. Our initial search list included 990 articles on surgery residency training models, 539 on competency-based surgical education, 78 on ABSITE scores, and 33 on ABS pass rate. Overall, 31 articles met inclusion criteria based on their effect on ACGME Core Competencies, ABSITE scores, and ABS certification. Systematic review showed that 5/31, 19/31, and 6/31 articles on process changes in surgical training programs had a positive effect on patient care, medical knowledge, and ABSITE scores, respectively. ABS certification was not analyzed. The other ACGME core competencies were addressed in only 6 studies. Several publications on process changes in surgical training programs have shown a positive effect on patient care, medical knowledge, and ABSITE scores. However, the effect on ABS certification, and other quantitative outcomes from residency programs, have not been addressed. Studies on education strategies showing evidence that residency program objectives are being achieved are still needed. This article addresses the 6 ACGME Core Competencies. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  10. Trening sensomotoryczny w procesie szkolenia sportowego tenisistów = sensomotoric training in the process of sport training of tennis players

    Directory of Open Access Journals (Sweden)

    Ewa Waldzińska

    2015-08-01

    Abstract The purpose of the research was to portray the need of including sensomotoric trainings into the sport training process of tennis players. At present developmental tendencies and sport progress in tennis require from coaches comprehensive work with players in early phases of training. Apart from preparing technical-tactical abilities and mental training, there is a clear need to apply exercises improving stability of joints for young, adolescent competitors. Specialist trainings with the physiotherapist that improve kinesthesia and neuromuscular coordination will minimize surcharges of the layout of movement, microtraumas, or chronic injuries that may send the competitor off the game for a short time or even permanently.     In the examinations 60 tennis players of a Student Sport Club "Return" in Łomża took part. They constituted a group of children and teenagers aged 10-18, training tennis as professionals or in the form of recreation. Tennis players were divided randomly into two groups. In the examined group (A sensomotoric trainings were introduced according to the annual training program, and the control group (B wasn't embraced with the program.     In the examinations there were used three tests, that evaluate proprioception of joints of lower limbs, upper limbs and the spine. The physiotherapist conducted sensomotoric tests before starting the cycle of sensomotoric trainings with tennis players, next the same tests were repeated after the annual training cycle.     It was stated that exercises of proprioception improve functionality of joints amongst all examined players. What is more, in the group of tennis players embraced with the cycle of sensomotoric trainings neuromuscular coordination underwent some significant improvement. Conducted tests of proprioception allowed to control the effectivenesses of training introduced by a physiotherapist with tennis players. Another assumption is that sensomotoric training should been integral

  11. Instructions included? Make safety training part of medical device procurement process.

    Science.gov (United States)

    Keller, James P

    2010-04-01

    Before hospitals embrace new technologies, it's important that medical personnel agree on how best to use them. Likewise, hospitals must provide the support to operate these sophisticated devices safely. With this in mind, it's wise for hospitals to include medical device training in the procurement process. Moreover, purchasing professionals can play a key role in helping to increase the amount of user training for medical devices and systems. What steps should you take to help ensure that new medical devices are implemented safely? Here are some tips.

  12. Spectral OCT with speckle contrast reduction for evaluation of the healing process after PRK and transepithelial PRK.

    Science.gov (United States)

    Kaluzny, Bartlomiej J; Szkulmowski, Maciej; Bukowska, Danuta M; Wojtkowski, Maciej

    2014-04-01

    We evaluate Spectral OCT (SOCT) with a speckle contrast reduction technique using resonant scanner for assessment of corneal surface changes after excimer laser photorefractive keratectomy (PRK) and we compare healing process between conventional PRK and transepithelial PRK. The measurements were performed before and after the surgery. Obtained results show that SOCT with a resonant scanner speckle contrast reduction is capable of providing information regarding the healing process after PRK. The main difference between the healing processes of PRK and TransPRK, assessed by SOCT, was the time to cover the stroma with epithelium, which was shorter in the TransPRK group.

  13. Differentiating maturational and training influences on fMRI activation during music processing.

    Science.gov (United States)

    Ellis, Robert J; Norton, Andrea C; Overy, Katie; Winner, Ellen; Alsop, David C; Schlaug, Gottfried

    2012-04-15

    Two major influences on how the brain processes music are maturational development and active musical training. Previous functional neuroimaging studies investigating music processing have typically focused on either categorical differences between "musicians versus nonmusicians" or "children versus adults." In the present study, we explored a cross-sectional data set (n=84) using multiple linear regression to isolate the performance-independent effects of age (5 to 33 years) and cumulative duration of musical training (0 to 21,000 practice hours) on fMRI activation similarities and differences between melodic discrimination (MD) and rhythmic discrimination (RD). Age-related effects common to MD and RD were present in three left hemisphere regions: temporofrontal junction, ventral premotor cortex, and the inferior part of the intraparietal sulcus, regions involved in active attending to auditory rhythms, sensorimotor integration, and working memory transformations of pitch and rhythmic patterns. By contrast, training-related effects common to MD and RD were localized to the posterior portion of the left superior temporal gyrus/planum temporale, an area implicated in spectrotemporal pattern matching and auditory-motor coordinate transformations. A single cluster in right superior temporal gyrus showed significantly greater activation during MD than RD. This is the first fMRI which has distinguished maturational from training effects during music processing. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Development and application of a decision support tool for reduction of product losses in the food-processing industry

    NARCIS (Netherlands)

    Akkerman, Renzo; van Donk, Dirk Pieter

    2008-01-01

    In food-processing industries, reduction of product losses is important for improving profitability and sustainability. This paper presents a decision support tool for analyzing the effects of planning decisions on the amount of product losses in the food-processing industry. We created a research

  15. The Validation of Vapor Phase Hydrogen Peroxide Microbial Reduction for Planetary Protection and a Proposed Vacuum Process Specification

    Science.gov (United States)

    Chung, Shirley; Barengoltz, Jack; Kern, Roger; Koukol, Robert; Cash, Howard

    2006-01-01

    The Jet Propulsion Laboratory, in conjunction with the NASA Planetary Protection Officer, has selected the vapor phase hydrogen peroxide sterilization process for continued development as a NASA approved sterilization technique for spacecraft subsystems and systems. The goal is to include this technique, with an appropriate specification, in NPR 8020.12C as a low temperature complementary technique to the dry heat sterilization process.To meet microbial reduction requirements for all Mars in-situ life detection and sample return missions, various planetary spacecraft subsystems will have to be exposed to a qualified sterilization process. This process could be the elevated temperature dry heat sterilization process (115 C for 40 hours) which was used to sterilize the Viking lander spacecraft. However, with utilization of such elements as highly sophisticated electronics and sensors in modern spacecraft, this process presents significant materials challenges and is thus an undesirable bioburden reduction method to design engineers. The objective of this work is to introduce vapor hydrogen peroxide (VHP) as an alternative to dry heat microbial reduction to meet planetary protection requirements.The VHP process is widely used by the medical industry to sterilize surgical instruments and biomedical devices, but high doses of VHP may degrade the performance of flight hardware, or compromise material properties. Our goal for this study was to determine the minimum VHP process conditions to achieve microbial reduction levels acceptable for planetary protection.

  16. Effect of calcium chloride on the preparation of NdFeB alloy powder by calciothermic reduction process

    International Nuclear Information System (INIS)

    Sidhu, R.K.; Verma, A.; Raina, K.K.

    1999-01-01

    The calciothermic reduction process has been identified to be one of the cost effective processes for producing NdFeB from Nd 2 O 3 . Use of CaCl 2 as slag former in calciothermic reduction is well established. This paper describes the effect of CaCl 2 on the various properties of NdFeB alloy powder prepared by calciothermic reduction. The effect of CaCl 2 on ease of disintegration of the reacted product during calcium leaching, particle size distribution, grain size, lattice parameters and residual calcium has been studied and compared with the alloy powder prepared without using calcium chloride. Addition of CaCl 2 has been found to result in easier disintegration, reduction in grain size and more uniform particle size distribution. Substantial decrease in the residual calcium in case of charge consisting of CaCl 2 was observed. The effect of lattice parameters was not found to be very significant. (author)

  17. DEVELOPMENT OF SCIENCE PROCESS SKILLS STUDENTS WITH PROJECT BASED LEARNING MODEL- BASED TRAINING IN LEARNING PHYSICS

    Directory of Open Access Journals (Sweden)

    Ratna Malawati

    2016-06-01

    Full Text Available This study aims to improve the physics Science Process Skills Students on cognitive and psychomotor aspects by using model based Project Based Learning training.The object of this study is the Project Based Learning model used in the learning process of Computationa Physics.The method used is classroom action research through two learning cycles, each cycle consisting of the stages of planning, implementation, observation and reflection. In the first cycle of treatment with their emphasis given training in the first phase up to third in the model Project Based Learning, while the second cycle is given additional treatment with emphasis discussion is collaboration in achieving the best results for each group of products. The results of data analysis showed increased ability to think Students on cognitive and Science Process Skills in the psychomotor.

  18. INFLUANCE OF TRAINING PROCESS ON DEVELOPMENT OF EXSPLOSIVE STRENGHT OF LEGS AT PIONEER BASKETBALL PLAYERS

    Directory of Open Access Journals (Sweden)

    Vukašin Badža

    2011-03-01

    Full Text Available The research is trying to give an answer on a question whether the training process which lasted two years influenced on development of exsplosive strenght of legs (one of basic psysical abilities at pioneer basketball players. The sample in a research are basketball players from „Danubius - Vojvodina Srbijagas” team, from Novi Sad. The group counts 20 players who participated in training process and on who measuring was conducted. Data were collected per two years, and measuring were exert three times during this period. Tests that were used in this research are: long jump, high jump and running 20m. The obtained data will be processed statistically, using ANOVA for repeated measures and descriptive statistics. Research results will be represented in tables and discussed in text.

  19. Strategies to reduce mass and photons transfer limitations in heterogeneous photocatalytic processes: Hexavalent chromium reduction studies.

    Science.gov (United States)

    Marinho, Belisa A; Cristóvão, Raquel O; Djellabi, Ridha; Caseiro, Ana; Miranda, Sandra M; Loureiro, José M; Boaventura, Rui A R; Dias, Madalena M; Lopes, José Carlos B; Vilar, Vítor J P

    2018-07-01

    The current work presents different approaches to overcome mass and photon transfer limitations in heterogeneous photocatalytic processes applied to the reduction of hexavalent chromium to its trivalent form in the presence of a sacrificial agent. Two reactor designs were tested, a monolithic tubular photoreactor (MTP) and a micro-meso-structured photoreactor (NETmix), both presenting a high catalyst surface area per reaction liquid volume. In order to reduce photon transfer limitations, the tubular photoreactor was packed with transparent cellulose acetate monolithic structures (CAM) coated with the catalyst by a dip-coating method. For the NETmix reactor, a thin film of photocatalyst was uniformly deposited on the front glass slab (GS) or on the network of channels and chambers imprinted in the back stainless steel slab (SSS) using a spray system. The reaction rate for the NETmix photoreactor was evaluated for two illumination sources, solar light or UVA-LEDs, using the NETmix with the front glass slab or/and back stainless steel slab coated with TiO 2 -P25. The reusability of the photocatalytic films on the NETmix walls was also evaluated for three consecutive cycles using fresh Cr(VI) solutions. The catalyst reactivity in combination with the NETmix-SSS photoreactor is almost 70 times superior to one obtained with the MTP. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Deposition of silver nanoparticles on multiwalled carbon nanotubes by chemical reduction process and their antimicrobial effects

    Energy Technology Data Exchange (ETDEWEB)

    Haider, Adawiya J., E-mail: adawiyahaider@yahoo.com [Nanotechnology and Advanced Materials Research Center, University of Technology, Baghdad, Republic of Iraq, 10066 (Iraq); Thamir, Amin D. [Production and Metallurgy department, University of Technology, University of Technology, Baghdad, Republic of Iraq, 10066 (Iraq); Ahmed, Duha S.; Mohammad, M. R. [Applied Physics department, University of Technology, University of Technology, Baghdad, Republic, of Iraq, 10066 (Iraq)

    2016-07-25

    In this paper, the functionalization of raw-MWCNTs involves oxidation reaction using concentrated acid mixture of HNO{sub 3}:H{sub 2}SO{sub 4} (1:3), via ultrasonic bath (170 W, 50 kHz) to obtain functional groups. Then Ag nanoparticles are decorated the outside over the surface of functionalized MWCNTs using a chemical reduction process resulting in the formation of(Ag/ MWCNTs) hybrid material. The results showed that outer diameter functionalized F-MWCNTs andAg nanoparticles size was about (11-80) nm and (10 to 25) nm, respectively using TEM and HRTEM. The crystallographic structure of MWCNTs using X-ray diffraction (XRD) analysis proved diffraction peaks at 38.1°, 44.3°, 64.7° and 77.4° degrees namely, Ag (111), Ag (200), Ag (220), and Ag (311) of the face-centered cubic lattice of Ag, respectively, excepting the peak at 2θ =25.6°, which correspond to the (0 0 2) reflection of the MWNTs are corresponding to Ag/MWNTs. The antimicrobial activities of Ag/MWCNTs hybrid using plate count method showed that decreasing a large number of bacteria colonies of E. coli and S. aureu with increasing the hybrid concentrations after incubation for 24 h in shaker incubator with percentage of inhibition approaching 100%.

  1. What Goes Around: the process of building a community-based harm reduction research project.

    Science.gov (United States)

    Jalloh, Chelsea; Illsley, Shohan; Wylie, John; Migliardi, Paula; West, Ethan; Stewart, Debbie; Mignone, Javier

    2017-11-16

    Often, research takes place on underserved populations rather than with underserved populations. This approach can further isolate and stigmatize groups that are already made marginalized. What Goes Around is a community-based research project that was led by community members themselves (Peers). This research aimed to implement a community-based research methodology grounded in the leadership and growing research capacity of community researchers and to investigate a topic which community members identified as important and meaningful. Chosen by community members, this project explored how safer sex and safer drug use information is shared informally among Peers. Seventeen community members actively engaged as both community researchers and research participants throughout all facets of the project: inception, implementation, analysis, and dissemination of results. Effective collaboration between community researchers, a community organization, and academics facilitated a research process in which community members actively guided the project from beginning to end. The methods used in What Goes Around demonstrated that it is not only possible, but advantageous, to draw from community members' involvement and direction in all stages of a community-based research project. This is particularly important when working with a historically underserved population. Purposeful and regular communication among collaborators, ongoing capacity building, and a commitment to respect the experience and expertise of community members were essential to the project's success. This project demonstrated that community members are highly invested in both informally sharing information about safer sex and safer drug use and taking leadership roles in directing research that prioritizes harm reduction in their communities.

  2. Noise Reduction Properties of an Experimental Bituminous Slurry with Crumb Rubber Incorporated by the Dry Process

    Directory of Open Access Journals (Sweden)

    Moisés Bueno

    2014-08-01

    Full Text Available Nowadays, cold technology for asphalt pavement in the field of road construction is considered as an alternative solution to conventional procedures from both an economic and environmental point of view. Among these techniques, bituminous slurry surfacing is obtaining an important role due to the properties of the obtained wearing course. The functional performance of this type of surfaces is directly related to its rough texture. Nevertheless, this parameter has a significant influence on the tire/road noise generation. To reduce this undesirable effect on the sound performance, new designs of elastic bituminous slurries have been developed. Within the FENIX project, this work presents the acoustical characterization of an experimental bituminous slurry with crumb rubber from wasted automobile tires incorporated by the dry process. The obtained results show that, under controlled operational parameters, the close proximity sound levels associated to the experimental slurry are considerably lower than those emitted by a conventional slurry wearing course. However, after one year of supporting traffic loads and different weather conditions, the evaluated bituminous slurry, although it conserves the original noise reduction properties in relation to the conventional one, noticeably increases the generated sound emission. Therefore, it is required to continue improving the design of experimental surfaces in order to enhance its long-term performance.

  3. Computational simulation studies of the reduction process of UF4 to metallic uranium

    International Nuclear Information System (INIS)

    Borges, Wesden de Almeida

    2011-01-01

    The production of metallic uranium is essential for production of fuel elements for using in nuclear reactors manufacturing of radioisotopes and radiopharmaceuticals. In IPEN, metallic uranium is produced by magnesiothermical reduction of UF 4 . This reaction is performed in a closed graphite crucible inserted in a sealed metal reactor and no contact with the outside environment. The set is gradually heated in an oven pit, until it reaches the ignition temperature of the reaction (between 600-650 degree C). The modeling of the heating profile of the system can be made using simulation programs by finite element method. Through the thermal profiles in the load, we can have a notion of heating period required for the reaction to occur, allowing the identification of the same group in a greater or smaller yield in metallic uranium production. Thermal properties of UF 4 are estimated, obtaining thermal conductivity and heat capacity using the Flash Laser Method, and for the load UF 4 + Mg, either. The results are compared to laboratory tests to simulate the primary production process. (author)

  4. Deposition of silver nanoparticles on multiwalled carbon nanotubes by chemical reduction process and their antimicrobial effects

    Science.gov (United States)

    Haider, Adawiya J.; Thamir, Amin D.; Ahmed, Duha S.; Mohammad, M. R.

    2016-07-01

    In this paper, the functionalization of raw-MWCNTs involves oxidation reaction using concentrated acid mixture of HNO3:H2SO4 (1:3), via ultrasonic bath (170 W, 50 kHz) to obtain functional groups. Then Ag nanoparticles are decorated the outside over the surface of functionalized MWCNTs using a chemical reduction process resulting in the formation of(Ag/ MWCNTs) hybrid material. The results showed that outer diameter functionalized F-MWCNTs andAg nanoparticles size was about (11-80) nm and (10 to 25) nm, respectively using TEM and HRTEM. The crystallographic structure of MWCNTs using X-ray diffraction (XRD) analysis proved diffraction peaks at 38.1°, 44.3°, 64.7° and 77.4° degrees namely, Ag (111), Ag (200), Ag (220), and Ag (311) of the face-centered cubic lattice of Ag, respectively, excepting the peak at 2θ =25.6°, which correspond to the (0 0 2) reflection of the MWNTs are corresponding to Ag/MWNTs. The antimicrobial activities of Ag/MWCNTs hybrid using plate count method showed that decreasing a large number of bacteria colonies of E. coli and S. aureu with increasing the hybrid concentrations after incubation for 24h in shaker incubator with percentage of inhibition approaching 100%.

  5. Reduction of turbidity and chromium content of tannery wastewater by electrocoagulation process.

    Science.gov (United States)

    2018-02-12

    The present study is carried out to remove the chromium and turbidity from tannery wastewater by the electrocoagulationprocess with aluminum electrodes. This experimental study is performed using a batch system. The applied pilot comprises a reactor containing two parallel metal electrodes (Al). The latter are connected as mono polar and a different potential is applied between them. Several working parameters, such as applied potential difference, electrolysis time, active electrode surface, inter-electrode distance and pH of the medium have been studied to achieve higher removal efficiency.The treatment achieved a maximum reduction of 99% for the turbidity and 93% for the chromium under the following conditions: a potential difference: 15V; electrodes surface: 45cm2, inter-electrode distance: 1cm; raw water pH (6.1) and a contact time of 90 min. Considering the obtained efficiency in the present study, electrocoagulation process has the potential to be utilized for the cost-effective removal of pollutants from wastewater.

  6. CERN Technical Training 2003: Learning for the LHC ! DISP-2003 - Digital Signal Processing

    CERN Multimedia

    2003-01-01

    DISP-2003 - Digital Signal Processing DISP-2003 is a two-term course given by CERN and University of Lausanne (UNIL) experts within the framework of the Technical Training Programme. The course will review the current techniques dealing with Digital Signal Processing, and it is intended for an audience who work or will work on digital signal processing aspects, and who need an introductory or refresher/update course. The course will be in English, with question and answers also in French. Spring 2 Term: DISP-2003: Advanced Digital Signal Processing 30 April 2003 - 21 May 2003, 4 lectures, Wednesdays afternoon (attendance cost: 40.- CHF, registration required) Lecturers: Léonard Studer, UNIL; Laurent Deniau, AT-MTM; Elena Wildner, AT-MAS Programme: Intelligent signal processing (ISP). Non-linear time series analysis. Image processing. Wavelets. (Basic concepts and definitions have been introduced during the previous Spring 1 Term: DISP-2003: Introduction to Digital Signal Processing). DISP-2003 is open...

  7. Development of strategies for saving energy by temperature reduction in warm forging processes

    Science.gov (United States)

    Varela, Sonia; Santos, Maite; Vadillo, Leire; Idoyaga, Zuriñe; Valbuena, Óscar

    2016-10-01

    This paper is associated to the European policy of increasing efficiency in raw material and energy usage. This policy becomes even more important in sectors consuming high amount of resources, like hot forging industry, where material costs sums up to 50% of component price and energy ones are continuously raising. The warm forging shows a clear potential of raw material reduction (near-net-shape components) and also of energy saving (forging temperature under 1000°C). However and due to the increment of the energy costs, new solutions are required by the forging sector in order to reduce the temperature below 900°C. The reported research is based on several approaches to reduce the forging temperature applied to a flanged shaft of the automotive sector as demonstration case. The developed investigations have included several aspects: raw material, process parameters, tools and dies behavior during forging process and also metallographic evaluation of the forged parts. This paper summarizes analysis of the ductility and the admissible forces of the flanged shaft material Ck45 in as-supplied state (as-rolled) and also in two additional heat treated states. Hot compression and tensile tests using a GLEEBLE 3800C Thermo mechanical simulator have been performed pursuing this target. In the same way, a coupled numerical model based on Finite Element Method (FEM) has been developed to predict the material flow, the forging loads and the stresses on the tools at lower temperature with the new heat treatments of the raw material. In order to validate the previous development, experimental trials at 850 °C and 750 °C were carried out in a mechanical press and the results were very promising.

  8. Thermoecological cost of electricity production in the natural gas pressure reduction process

    International Nuclear Information System (INIS)

    Kostowski, Wojciech J.; Usón, Sergio; Stanek, Wojciech; Bargiel, Paweł

    2014-01-01

    The paper presents a novel concept for thermodynamic evaluation of a selected energy system. The presented method has been developed by integration of the Thermo-Economic Analysis with the theory of Thermo-Ecological Cost. It can be applied as a thermodynamic evaluation method of rational resources management within any production system. It takes into account both the interrelation of irreversibility within the analyzed system and its influence on the global effects related to the depletion of non-renewable natural resources. The proposed method has been applied to evaluate the production of electricity in the process of natural gas transmission at pressure reduction stations. The expansion system is based on an existing plant integrated with a CHP module, characterized by a performance ratio of 89.5% and exergy efficiency of 49.2%. Within the paper, this expansion plant is supplied with natural gas transported from a natural deposit through a case-study transmission system with 4 compressor stations. The TEC (thermoecological cost) method was applied in conjunction with thermoeconomic analysis. As a result, TEC of the electricity generated in the expanders was determined at 2.42 kJ/kJ, TEC of electricity from the CHP module is 1.77, and the TEC of medium-pressure natural gas distributed to consumers is 1.022. - Highlights: • The chain of NG transmission with an exergy recovery expansion plant was analyzed. • New methodology coupling the TEC (thermoecological cost) and thermoeconomics. • Decomposition of the TEC formation process. • Case-study transmission system yields TEC of natural gas = 1.0222. • Expansion plant yields TEC of electricity 2.42 (expanders) and 1.77 (CHP module)

  9. Training Students’ Science Process Skills through Didactic Design on Work and Energy

    Science.gov (United States)

    Ramayanti, S.; Utari, S.; Saepuzaman, D.

    2017-09-01

    Science Process Skills (SPS) has not been optimally trained to the students in the learning activity. The aim of this research is finding the ways to train SPS on the subject of Work and Energy. One shot case study design is utilized in this research that conducted on 32 students in one of the High Schools in Bandung. The students’ SPS responses were analyzed by the development SPS based assessment portfolios. The results of this research showed the didactic design that had been designed to training the identifying variables skills, formulating hypotheses, and the experiment activity shows the development. But the didactic design to improve the students’ predicting skills shows that the development is still not optimal. Therefore, in the future studies need to be developed the didactic design on the subject Work and Energy that exercising these skills.

  10. Effect of the Reduction Temperature of PdAg Nanoparticles during the Polyol Process in the Ethanol Electrooxidation Reaction

    OpenAIRE

    Carrera-Cerritos, R.; Salazar-Hernandez, C.; Galindo-Esquivel, I. R.; Fuentes-Ramirez, R.

    2018-01-01

    This work reports the effect of reduction temperature during the synthesis of PdAg catalysts through the polyol process and their evaluation in the ethanol electrooxidation reaction (EOR). The characterization was performed using Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD). The electrochemical evaluation for the ethanol electrooxidation reaction was implemented in alkaline medium using chronoamperometry (CA) and cyclic voltammetry (CV). An important effect of the reduct...

  11. Effects of musical training on sound pattern processing in high-school students.

    Science.gov (United States)

    Wang, Wenjung; Staffaroni, Laura; Reid, Errold; Steinschneider, Mitchell; Sussman, Elyse

    2009-05-01

    Recognizing melody in music involves detection of both the pitch intervals and the silence between sequentially presented sounds. This study tested the hypothesis that active musical training in adolescents facilitates the ability to passively detect sequential sound patterns compared to musically non-trained age-matched peers. Twenty adolescents, aged 15-18 years, were divided into groups according to their musical training and current experience. A fixed order tone pattern was presented at various stimulus rates while electroencephalogram was recorded. The influence of musical training on passive auditory processing of the sound patterns was assessed using components of event-related brain potentials (ERPs). The mismatch negativity (MMN) ERP component was elicited in different stimulus onset asynchrony (SOA) conditions in non-musicians than musicians, indicating that musically active adolescents were able to detect sound patterns across longer time intervals than age-matched peers. Musical training facilitates detection of auditory patterns, allowing the ability to automatically recognize sequential sound patterns over longer time periods than non-musical counterparts.

  12. Injury Reduction Effectiveness of Prescribing Running Shoes Based on Plantar Shape in Marine Corps Basic Training San Diego, CA and Parris Island, SC

    Science.gov (United States)

    2009-05-01

    in excessive pronation, creating a torsional force that repeatedly overstretched the plantar fascia , leading to the fasciitis. On the basis of one...COVERED (From – To) MARCH 2007–OCTOBER 2007 4. TITLE AND SUBTITLE Injury-Reduction Effectiveness of Assigning Running Shoes Based on Plantar Shape... plantar surface influenced injury risk in Marine Corps basic training. After foot examinations, Marine Corps recruits in an experimental group (E

  13. Injury-Reduction Effectiveness of Prescribing Running Shoes Based on Plantar Shape in Marine Corps Basic Training, San Diego, CA, and Parris Island, SC

    Science.gov (United States)

    2007-10-01

    in excessive pronation, creating a torsional force that repeatedly overstretched the plantar fascia , leading to the fasciitis. On the basis of one...COVERED (From – To) MARCH 2007–OCTOBER 2007 4. TITLE AND SUBTITLE Injury-Reduction Effectiveness of Assigning Running Shoes Based on Plantar Shape... plantar surface influenced injury risk in Marine Corps basic training. After foot examinations, Marine Corps recruits in an experimental group (E

  14. [Effect of high-intensity interval training on the reduction of glycosylated hemoglobin in type-2 diabetic adult patients].

    Science.gov (United States)

    Aguilera Eguía, Raúl Alberto; Russell Guzmán, Javier Antonio; Soto Muñoz, Marcelo Enrique; Villegas González, Bastián Eduardo; Poblete Aro, Carlos Emilio; Ibacache Palma, Alejandro

    2015-03-05

    Type 2 diabetes mellitus is one of the major non-communicable chronic diseases in the world. Its prevalence in Chile is significant, and complications associated with this disease involve great costs, which is why prevention and treatment of this condition are essential. Physical exercise is an effective means for prevention and treatment of type 2 diabetes mellitus. The emergence of new forms of physical training, such as "high intensity interval training", presents novel therapeutic alternatives for patients and health care professionals. To assess the validity and applicability of the results regarding the effectiveness of high intensity interval training in reducing glycosylated hemoglobin in adult patients with type 2 diabetes mellitus and answer the following question: In subjects with type 2 diabetes, can the method of high intensity interval training compared to moderate intensity exercise decrease glycosylated hemoglobin? We performed a critical analysis of the article "Feasibility and preliminary effectiveness of high intensity interval training in type 2 diabetes". We found no significant differences in the amount of glycosylated hemoglobin between groups of high intensity interval training and moderate-intensity exercise upon completion of the study (p>0.05). In adult patients with type 2 diabetes mellitus, high intensity interval training does not significantly improve glycosylated hemoglobin levels. Despite this, the high intensity interval training method shows as much improvement in body composition and physical condition as the moderate intensity exercise program.

  15. Training practices of cell processing laboratory staff: analysis of a survey by the Alliance for Harmonization of Cellular Therapy Accreditation.

    Science.gov (United States)

    Keever-Taylor, Carolyn A; Slaper-Cortenbach, Ineke; Celluzzi, Christina; Loper, Kathy; Aljurf, Mahmoud; Schwartz, Joseph; Mcgrath, Eoin; Eldridge, Paul

    2015-12-01

    Methods for processing products used for hematopoietic progenitor cell (HPC) transplantation must ensure their safety and efficacy. Personnel training and ongoing competency assessment is critical to this goal. Here we present results from a global survey of methods used by a diverse array of cell processing facilities for the initial training and ongoing competency assessment of key personnel. The Alliance for Harmonisation of Cellular Therapy Accreditation (AHCTA) created a survey to identify facility type, location, activity, personnel, and methods used for training and competency. A survey link was disseminated through organizations represented in AHCTA to processing facilities worldwide. Responses were tabulated and analyzed as a percentage of total responses and as a percentage of response by region group. Most facilities were based at academic medical centers or hospitals. Facilities with a broad range of activity, product sources and processing procedures were represented. Facilities reported using a combination of training and competency methods. However, some methods predominated. Cellular sources for training differed for training versus competency and also differed based on frequency of procedures performed. Most facilities had responsibilities for procedures in addition to processing for which training and competency methods differed. Although regional variation was observed, training and competency requirements were generally consistent. Survey data showed the use of a variety of training and competency methods but some methods predominated, suggesting their utility. These results could help new and established facilities in making decisions for their own training and competency programs. Copyright © 2015 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  16. MONITORING FIDELITY IN THE ADOLESCENT COMMUNITY REINFORCEMENT APPROACH (A-CRA): THE TRAINING PROCESS FOR A-CRA RATERS.

    Science.gov (United States)

    Garner, Bryan R; Barnes, Brandi; Godley, Susan H

    2009-01-01

    Ensuring evidence-based treatments are delivered with a high degree of fidelity is an important aspect of transporting these practices to community-based treatment providers. Just as training is critical for clinicians who plan to deliver the Adolescent Community Reinforcement Approach (A-CRA), a process of training and vetting individuals who assess sessions for fidelity also is critical. This article describes the training process for session raters who assess fidelity of A-CRA during the clinician training and certification process. A-CRA is currently being implemented in 32 independent community-based agencies as part of a large initiative funded by the Center for Substance Abuse Treatment.

  17. The Transfer of Cognitive Speed of Processing Training to Older Adults' Driving Mobility Across 5 Years.

    Science.gov (United States)

    Ross, Lesley A; Edwards, Jerri D; O'Connor, Melissa L; Ball, Karlene K; Wadley, Virginia G; Vance, David E

    2016-01-01

    Multilevel models assessed the effects of cognitive speed of processing training (SPT) on older adults' self-reported driving using intention-to-treat (ITT, randomization to training or control conditions) and dosage (treatment-received via number of training sessions) analyses across 5 years. Participants randomized to SPT (n = 598) were compared with those randomized to either the no-contact control (n = 598) or memory training, which served as an active control (n = 610). Driving mobility (frequency, exposure, and space) was assessed over time. No significant effects were found within the ITT analyses. However, number of SPT sessions did affect driving mobility outcomes. In the full sample (N = 1,806), higher SPT doses were associated with maintained driving frequency as compared with both control groups, but no effects were found for driving exposure or space. Subsample analyses (n = 315) revealed that persons at-risk for mobility declines (i.e., poor initial processing speed) who received additional booster SPT sessions reported greater maintenance of both driving frequency and exposure over time as compared with the no-contact and active control groups. These results and prior research indicate that cognitive SPT transfers to prolonged driving mobility among older adults. Future research should investigate the mechanisms behind transfer effects to real-world activities, such as driving. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. The Transfer of Cognitive Speed of Processing Training to Older Adults’ Driving Mobility Across 5 Years

    Science.gov (United States)

    Edwards, Jerri D.; O’Connor, Melissa L.; Ball, Karlene K.; Wadley, Virginia G.; Vance, David E.

    2016-01-01

    Objectives. Multilevel models assessed the effects of cognitive speed of processing training (SPT) on older adults’ self-reported driving using intention-to-treat (ITT, randomization to training or control conditions) and dosage (treatment-received via number of training sessions) analyses across 5 years. Method. Participants randomized to SPT (n = 598) were compared with those randomized to either the no-contact control (n = 598) or memory training, which served as an active control (n = 610). Driving mobility (frequency, exposure, and space) was assessed over time. Results. No significant effects were found within the ITT analyses. However, number of SPT sessions did affect driving mobility outcomes. In the full sample (N = 1,806), higher SPT doses were associated with maintained driving frequency as compared with both control groups, but no effects were found for driving exposure or space. Subsample analyses (n = 315) revealed that persons at-risk for mobility declines (i.e., poor initial processing speed) who received additional booster SPT sessions reported greater maintenance of both driving frequency and exposure over time as compared with the no-contact and active control groups. Discussion. These results and prior research indicate that cognitive SPT transfers to prolonged driving mobility among older adults. Future research should investigate the mechanisms behind transfer effects to real-world activities, such as driving. PMID:25878053

  19. Emotion processing fails to modulate putative mirror neuron response to trained visuomotor associations.

    Science.gov (United States)

    Fitzgibbon, Bernadette M; Kirkovski, Melissa; Fornito, Alex; Paton, Bryan; Fitzgerald, Paul B; Enticott, Peter G

    2016-04-01

    Recent neuroimaging studies have demonstrated that activation of the putative human mirror neuron system (MNS) can be elicited via visuomotor training. This is generally interpreted as supporting an associative learning account of the mirror neuron system (MNS) that argues against the ontogeny of the MNS to be an evolutionary adaptation for social cognition. The current study assessed whether a central component of social cognition, emotion processing, would influence the MNS activity to trained visuomotor associations, which could support a broader role of the MNS in social cognition. Using functional magnetic resonance imaging (fMRI), we assessed repetition suppression to the presentation of stimulus pairs involving a simple hand action and a geometric shape that was either congruent or incongruent with earlier association training. Each pair was preceded by an image of positive, negative, or neutral emotionality. In support of an associative learning account of the MNS, repetition suppression was greater for trained pairs compared with untrained pairs in several regions, primarily supplementary motor area (SMA) and right inferior frontal gyrus (rIFG). This response, however, was not modulated by the valence of the emotional images. These findings argue against a fundamental role of emotion processing in the mirror neuron response, and are inconsistent with theoretical accounts linking mirror neurons to social cognition. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Usalpharma: A Cloud-Based Architecture to Support Quality Assurance Training Processes in Health Area Using Virtual Worlds

    Directory of Open Access Journals (Sweden)

    Francisco J. García-Peñalvo

    2014-01-01

    Full Text Available This paper discusses how cloud-based architectures can extend and enhance the functionality of the training environments based on virtual worlds and how, from this cloud perspective, we can provide support to analysis of training processes in the area of health, specifically in the field of training processes in quality assurance for pharmaceutical laboratories, presenting a tool for data retrieval and analysis that allows facing the knowledge discovery in the happenings inside the virtual worlds.

  1. Usalpharma: A Cloud-Based Architecture to Support Quality Assurance Training Processes in Health Area Using Virtual Worlds

    Science.gov (United States)

    García-Peñalvo, Francisco J.; Pérez-Blanco, Jonás Samuel; Martín-Suárez, Ana

    2014-01-01

    This paper discusses how cloud-based architectures can extend and enhance the functionality of the training environments based on virtual worlds and how, from this cloud perspective, we can provide support to analysis of training processes in the area of health, specifically in the field of training processes in quality assurance for pharmaceutical laboratories, presenting a tool for data retrieval and analysis that allows facing the knowledge discovery in the happenings inside the virtual worlds. PMID:24778593

  2. ANALYSIS OF EFFICIENCY OF THE DISTANCE TRAINING SYSTEM IN THE PROCESS OF COMPETENCY VERIFICATION

    Directory of Open Access Journals (Sweden)

    Kravtsovа L.

    2017-12-01

    Full Text Available The Kherson State Maritime Academy conducts experimental research on the integration of the educational process on the basis of a competence approach to the state educational policy of Ukraine. One of the directions of this work is the creation and implementation of a distance education platform to support the educational process in the Kherson Maritime Academy. The distance learning system of KSMA is built on the basis of the open Moodle platform, which offers a wide range of opportunities to fully support the learning process in the remote environment, namely, a variety of ways of presenting the training material, testing knowledge and monitoring progress. The peculiarity of the developed system is that the effectiveness of the training strategy is provided by taking into account the psychological characteristics of the user contingent, the ultimate goal of training, the motivation of the whole process of education, namely, the specifics of the seaman's profession. One of the main directions of the work was a complete replacement of the classical methodology for conducting the examination session for complex testing, which covers all disciplines from 1 to 5 courses of study and is conducted on the basis of a distance education platform. The results of the experiment showed that own site of distance learning is an effective tool for studying the teaching material and for testing the quality of its learning.

  3. Training processes in under 6s football competition: The transition from ingenuity to institutionalization

    Directory of Open Access Journals (Sweden)

    Abel Merino Orozco

    2016-12-01

    Full Text Available Under 6s football competition is a school sport that has inherent educational implications. Moreover, it is a booming non-formal socio-educational framework where families and children lay training expectations and dreams. The aim is to comprehend the emerging learning processes promoted in this environment for 6 years-old children, when the child starts the institutionalization process in the ruled sport. The research uses a case study design, the ethnographic mode, through participant observation. It uses the narrative and image data to understand the scenario from the perspective of its builder. The results show that the institutionalization process starts from the ingenuity and lack of understanding of the child, who develops training processes in a prescriptive environment, where the competitive performance of the team is pursued. Promoting certain types of learning which the participant himself consciously considers inappropriate undertakes the presence of different kinds of behaviour, which go against the positive values usually attributed to football. The study claims for the necessity of taking advantage of the training opportunities which football offers to children such as the enhancing of creativity, self-efficacy and self-esteem.

  4. CERN Technical Training 2003: Learning for the LHC! DISP-2003 - Digital Signal Processing

    CERN Multimedia

    2003-01-01

    DISP-2003 is a two-term course given by CERN and University of Lausanne (UNIL) experts within the framework of the Technical Training Programme. The course will review the current techniques dealing with Digital Signal Processing, and it is intended for an audience who work or will work on digital signal processing aspects, and who need an introductory or refresher/update course. The course will be in English, with question and answers also in French. Spring 2 Term: DISP-2003: Advanced Digital Signal Processing 30 April 2003 - 21 May 2003, 4 lectures, Wednesdays afternoon. Attendance cost: 40.- CHF, registration required. Lecturers: Léonard Studer, UNIL; Laurent Deniau, AT-MTM; Elena Wildner, AT-MAS. Programme: Intelligent signal processing (ISP). Non-linear time series analysis. Image processing. Wavelets. Basic concepts and definitions have been introduced during the previous Spring 1 Term: DISP-2003: Introduction to Digital Signal Processing. DISP-2003 is open to all people interested, but registrat...

  5. Degradation and ecotoxicity of dye Reactive Black 5 after reductive-oxidative process : Environmental Science and Pollution Research.

    Science.gov (United States)

    Cuervo Lumbaque, Elisabeth; Gomes, Monike Felipe; Da Silva Carvalho, Vanessa; de Freitas, Adriane Martins; Tiburtius, Elaine Regina Lopes

    2017-03-01

    This research paper describes the study of a reduction-oxidation system using commercial steel wool (Fe 0 ) and H 2 O 2 for degradation of the dye Reactive Black 5 and aromatic compounds in water. The reductive process alone allowed the almost complete removal of color (97 ± 1 %) after 60 min of reaction. The decrease in spectral area (λ = 599 nm) associated with the chromophore group indicates breakage of the azo bonds. Moreover, the significant change in UV spectra can be associated with the formation of aromatic amines. Regarding the transformation products, a spectrophotometric method based on the diazotization reaction was employed to identify aromatic amines after reductive process, using sulfanilic acid as a model of aromatic amines. In addition, association with Fenton reagents improved the efficiency in the system with 93 ± 1 % degradation of intermediates formed during the reductive process. Ecotoxicological analysis revealed that the dye solution, after the reductive and oxidative processes, was not toxic to Lactuca sativa seeds. For Daphnia magna, the EC 50 (%) values observed revealed that dye solution has an EC 50 (%) = 74.1 and after reductive process, the toxicity increased (EC 50 (%) = 63.5), which might be related to the formation of aromatic amines. However, after the Fenton process, the EC 50 (%) was >100. These results demonstrated that the Fenton reaction using steel wool as an iron source was very efficient to decrease color, aromatic transformation products, and the ecotoxicity of Reactive Black 5 in solution.

  6. Small Acute Benefits of 4 Weeks Processing Speed Training Games on Processing Speed and Inhibition Performance and Depressive Mood in the Healthy Elderly People: Evidence from a Randomized Control Trial.

    Science.gov (United States)

    Nouchi, Rui; Saito, Toshiki; Nouchi, Haruka; Kawashima, Ryuta

    2016-01-01

    Background: Processing speed training using a 1-year intervention period improves cognitive functions and emotional states of elderly people. Nevertheless, it remains unclear whether short-term processing speed training such as 4 weeks can benefit elderly people. This study was designed to investigate effects of 4 weeks of processing speed training on cognitive functions and emotional states of elderly people. Methods: We used a single-blinded randomized control trial (RCT). Seventy-two older adults were assigned randomly to two groups: a processing speed training game (PSTG) group and knowledge quiz training game (KQTG) group, an active control group. In PSTG, participants were asked to play PSTG (12 processing speed games) for 15 min, during five sessions per week, for 4 weeks. In the KQTG group, participants were asked to play KQTG (four knowledge quizzes) for 15 min, during five sessions per week, for 4 weeks. We measured several cognitive functions and emotional states before and after the 4 week intervention period. Results: Our results revealed that PSTG improved performances in processing speed and inhibition compared to KQTG, but did not improve performance in reasoning, shifting, short term/working memory, and episodic memory. Moreover, PSTG reduced the depressive mood score as measured by the Profile of Mood State compared to KQTG during the 4 week intervention period, but did not change other emotional measures. Discussion: This RCT first provided scientific evidence related to small acute benefits of 4 week PSTG on processing speed, inhibition, and depressive mood in healthy elderly people. We discuss possible mechanisms for improvements in processing speed and inhibition and reduction of the depressive mood. Trial registration: This trial was registered in The University Hospital Medical Information Network Clinical Trials Registry (UMIN000022250).

  7. Reduction and immobilization of chromate in chromite ore processing residue with nanoscale zero-valent iron

    International Nuclear Information System (INIS)

    Du, Jingjing; Lu, Jinsuo; Wu, Qiong; Jing, Chuanyong

    2012-01-01

    Highlights: ► COPR remediation mechanism using nZVI was investigated. ► PHREEQC model calculation agreed well with our GANC experimental results. ► Incubation COPR and nZVI with >27% water content could reduce Cr(VI) in solids. ► Water content is the key factor to assist electron transfer between nZVI and COPR. - Abstract: Chromite ore processing residue (COPR) poses a great environmental and health risk with persistent Cr(VI) leaching. To reduce Cr(VI) and subsequently immobilize in the solid matrix, COPR was incubated with nanoscale zero-valent iron (nZVI) and the Cr(VI) speciation and leachability were studied. Multiple complementary analysis methods including leaching tests, X-ray powder diffraction, X-ray absorption near edge structure (XANES) spectroscopy, and X-ray photoelectron spectroscopy (XPS) were employed to investigate the immobilization mechanism. Geochemical PHREEQC model calculation agreed well with our acid neutralizing capacity experimental results and confirmed that when pH was lowered from 11.7 to 7.0, leachate Cr(VI) concentrations were in the range 358–445 mg L −1 which contributed over 90% of dissolved Cr from COPR. Results of alkaline digestion, XANES, and XPS demonstrated that incubation COPR with nZVI under water content higher than 27% could result in a nearly complete Cr(VI) reduction in solids and less than 0.1 mg L −1 Cr(VI) in the TCLP leachate. The results indicated that remediation approaches using nZVI to reduce Cr(VI) in COPR should be successful with sufficient water content to facilitate electron transfer from nZVI to COPR.

  8. Extubation process in bed-ridden elderly intensive care patients receiving inspiratory muscle training: a randomized clinical trial.

    Science.gov (United States)

    Cader, Samária Ali; de Souza Vale, Rodrigo Gomes; Zamora, Victor Emmanuel; Costa, Claudia Henrique; Dantas, Estélio Henrique Martin

    2012-01-01

    The purpose of this study was to evaluate the extubation process in bed-ridden elderly intensive care patients receiving inspiratory muscle training (IMT) and identify predictors of successful weaning. Twenty-eight elderly intubated patients in an intensive care unit were randomly assigned to an experimental group (n = 14) that received conventional physiotherapy plus IMT with a Threshold IMT(®) device or to a control group (n = 14) that received only conventional physiotherapy. The experimental protocol for muscle training consisted of an initial load of 30% maximum inspiratory pressure, which was increased by 10% daily. The training was administered for 5 minutes, twice daily, 7 days a week, with supplemental oxygen from the beginning of weaning until extubation. Successful extubation was defined by the ventilation time measurement with noninvasive positive pressure. A vacuum manometer was used for measurement of maximum inspiratory pressure, and the patients' Tobin index values were measured using a ventilometer. The maximum inspiratory pressure increased significantly (by 7 cm H(2)O, 95% confidence interval [CI] 4-10), and the Tobin index decreased significantly (by 16 breaths/ min/L, 95% CI -26 to 6) in the experimental group compared with the control group. The Chi-squared distribution did not indicate a significant difference in weaning success between the groups (χ(2) = 1.47; P = 0.20). However, a comparison of noninvasive positive pressure time dependence indicated a significantly lower value for the experimental group (P = 0.0001; 95% CI 13.08-18.06). The receiver-operating characteristic curve showed an area beneath the curve of 0.877 ± 0.06 for the Tobin index and 0.845 ± 0.07 for maximum inspiratory pressure. The IMT intervention significantly increased maximum inspiratory pressure and significantly reduced the Tobin index; both measures are considered to be good extubation indices. IMT was associated with a reduction in noninvasive positive

  9. PROFESSIONAL TRAINING IN THE TERMS OF MICROENTERPRISES: PROCESS MODELLING OF EDUCATIONAL AND PROFESSIONAL INTERACTION

    Directory of Open Access Journals (Sweden)

    V. A. Fedorov

    2017-01-01

    Full Text Available Aim. The aim of this article is to understand the current issues of pedagogical training situation of a potential employee an experienced professional when using the internal resources of micro-enterprises. The relevance of the research problem dues to the needs of the labour market, terms of developing economy situation of micro-entrepreneurship and the demands of the subject of labour activity to vocational training without discontinuing work.Methodology and research methods. A leading approach to the study of this problem is a system-activity one, which allows us to represent the process of professional training in terms of the micro-enterprise as a system activity of subjects for the development of professional competence of the employee. The following research methods are used to solve the set tasks: theoretical study and analysis of psychological, pedagogical, sociological, scientific-methodical and special literature on the problem under study; a systematic approach to the disclosure of the nature of the problem and the formation of conceptual-terminological apparatus of the research; study and analysis of legislative and normative-legal acts; empirical – pedagogical observation, generalization and study of teaching experience, pedagogical design, questionnaire, interview, interviews, analysis of results, method of expert evaluations and their generalization.Results. The results of the research showed that the process of training and professional interaction of the micro-enterprise employees will be effective if training and professional interaction of the micro-enterprise employees to be considered as a productive mutual agreed actions of subjects of labour, aimed at solving the educational and professional problems in the process of joint labour activity. Developed structural-functional model of training and professional interaction of employees of micro-enterprises allows us to introduce the process of professional training as a

  10. Training Drivers, Competitive Strategy and Clients' Needs: Case Studies of Three Business Process Outsourcing Organisations

    Science.gov (United States)

    Malik, Ashish

    2009-01-01

    Purpose: The purpose of this paper is to examine the factors that drive a firm's decision to invest in training in India's IT-enabled services/business process outsourcing (ITeS/BPO) sector. It aims to consider a much-neglected area and an often-cited need to consider external factors, especially the needs of an organisation's clients in a firm's…

  11. Novel, Regenerable Microlith Catalytic Reactor for CO2 Reduction via Bosch Process, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Precision Combustion, Inc. (PCI) proposes to develop an extremely compact, lightweight and regenerable MicrolithREG catalytic CO2 reduction reactor, capable of...

  12. Influence of musical expertise and musical training on pitch processing in music and language.

    Science.gov (United States)

    Besson, Mireille; Schön, Daniele; Moreno, Sylvain; Santos, Andréia; Magne, Cyrille

    2007-01-01

    We review a series of experiments aimed at studying pitch processing in music and speech. These studies were conducted with musician and non musician adults and children. We found that musical expertise improved pitch processing not only in music but also in speech. Demonstrating transfer of training between music and language has interesting applications for second language learning. We also addressed the issue of whether the positive effects of musical expertise are linked with specific predispositions for music or with extensive musical practice. Results of longitudinal studies argue for the later. Finally, we also examined pitch processing in dyslexic children and found that they had difficulties discriminating strong pitch changes that are easily discriminate by normal readers. These results argue for a strong link between basic auditory perception abilities and reading abilities. We used conjointly the behavioral method (Reaction Times and error rates) and the electrophysiological method (recording of the changes in brain electrical activity time-locked to stimulus presentation, Event-Related brain Potentials or ERPs). A set of common processes may be responsible for pitch processing in music and in speech and these processes are shaped by musical practice. These data add evidence in favor of brain plasticity and open interesting perspectives for the remediation of dyslexia using musical training.

  13. Randomised trial of structured antenatal training sessions to improve the birth process.

    Science.gov (United States)

    Maimburg, R D; Vaeth, M; Dürr, J; Hvidman, L; Olsen, J

    2010-07-01

    To compare the birth process in nulliparous women enrolled in a structured antenatal training programme, the 'Ready for Child' programme, with women allocated to routine care. A randomised controlled trial. A Danish university hospital. Thousand hundred and ninety-three nulliparous women, recruited before week 22 + 0. Methods Compliance to the protocol was monitored by questionnaires sent to the women by email, and by data from the local birth cohort database. Data were analysed according to the 'intention-to-treat' principle. Women were randomised to receive 9 hours of antenatal training or no formalised training. Of the 1193 women, 603 were randomised to the intervention group and 590 were allocated to the reference group. Cervix dilatation on arrival at the maternity ward, use of pain relief and medical interventions during the birth process, and the women's birth experience. Women who attended the 'Ready for Child' programme arrived at the maternity ward in active labour more often than the reference group [relative risk (RR) 1.45, 95% confidence interval (95% CI) 1.26-1.65, P less epidural analgesia during labour (RR 0.84, 95% CI 0.73-0.97, P less pain relief overall (RR 0.99, 95% CI 0.94-1.04, P women's self-reported birth experiences were similar in the two groups. We found no adverse effects of the intervention. Attending the 'Ready for Child' programme may help women to cope better with the birth process. Adverse effects are few, if any.

  14. Injury Reduction Effectiveness of Prescribing Running Shoes Based on Foot Shape in Air Force Basic Military Training

    National Research Council Canada - National Science Library

    Knapik, Joseph J; Brosch, Lorie C; Venuto, Margaret; Swedler, David I; Bullock, Steven H; Gaines, Lorraine S; Murphy, Ryan J; Canada, Sara E; Hoedebecke, Edward L; Tobler, Steven K

    2008-01-01

    In response to a request from the Military Training Task Force of the Defense Safety Oversight Council this study examined whether prescribing running shoes based on the shape of the plantar surface...

  15. CERN Technical Training 2003: Learning for the LHC ! DISP-2003  -  Digital Signal Processing

    CERN Multimedia

    2003-01-01

    DISP-2003 is a two-term course given by CERN and University of Lausanne (UNIL) experts within the framework of the Technical Training Programme. The course will review the current techniques dealing with Digital Signal Processing. The DISP-2003 lecture series is composed of two Terms, and it is intended for an audience who work or will work on digital signal processing aspects, and who need an introductory or refresher/update course. The course will be in English, with questions and answers also in French. Spring 1 Term: DISP-2003: Introduction to Digital Signal Processing 20 February 2003 - 3 April 2003, 7 lectures, Thursdays (attendance cost: 70.- CHF, registration required) Lecturers: Maria Elena Angoletta, AB-BDI; Guy Baribaud, AB-BDI; Philippe Baudrenghien, AB-RF; Laurent Deniau, AT-MTM Programme: 'Classical' digital signal processing. Fourier analysis. The Laplace transform. The z-transform. Digital filters. Statistics for Signal Processing. Signal Estimation and Spectral Analysis. Spring 2 T...

  16. Reduction of potassium content of green bean pods and chard by culinary processing. Tools for chronic kidney disease.

    Science.gov (United States)

    Martínez-Pineda, Montserrat; Yagüe-Ruiz, Cristina; Caverni-Muñoz, Alberto; Vercet-Tormo, Antonio

    2016-01-01

    In order to prevent a possible hyperkalemia, chronic renal patients, especially in advanced stages, must follow a low potassium diet. So dietary guidelines for chronic kidney disease recommend limiting the consumption of many vegetables, as well as to apply laborious culinary techniques to maximize the reduction of potassium. The aim of this work is to analyze potassium content from several vegetable, fresh products, frozen and preserved, as well as check and compare the effectiveness in potassium reduction of different culinary processes, some of them recommended in dietary guidelines such as soaking or double cooking. Sample potassium content was analyzed by triplicate using flamephotometry. The results showed significant reductions in potassium content in all culinary processes studied. The degree of loss varied depending on the type of vegetable and processing applied. Frozen products achieved greater reductions than the fresh ones, obtaining in some cases losses greater than 90%. In addition, it was observed how in many cases the single application of a normal cooking reached potassium reductions to acceptable levels for its inclusion in renal patient diet. The results shown in this study are very positive because they provide tools for professionals who deal with this kind of patients. They allow them to adapt more easily to the needs and preferences of their patients and increase dietary variety. Copyright © 2016 Sociedad Española de Nefrología. Published by Elsevier España, S.L.U. All rights reserved.

  17. Massive training artificial neural network (MTANN) for reduction of false positives in computerized detection of lung nodules in low-dose computed tomography

    International Nuclear Information System (INIS)

    Suzuki, Kenji; Armato, Samuel G. III; Li, Feng; Sone, Shusuke; Doi, Kunio

    2003-01-01

    In this study, we investigated a pattern-recognition technique based on an artificial neural network (ANN), which is called a massive training artificial neural network (MTANN), for reduction of false positives in computerized detection of lung nodules in low-dose computed tomography (CT) images. The MTANN consists of a modified multilayer ANN, which is capable of operating on image data directly. The MTANN is trained by use of a large number of subregions extracted from input images together with the teacher images containing the distribution for the 'likelihood of being a nodule'. The output image is obtained by scanning an input image with the MTANN. The distinction between a nodule and a non-nodule is made by use of a score which is defined from the output image of the trained MTANN. In order to eliminate various types of non-nodules, we extended the capability of a single MTANN, and developed a multiple MTANN (Multi-MTANN). The Multi-MTANN consists of plural MTANNs that are arranged in parallel. Each MTANN is trained by using the same nodules, but with a different type of non-nodule. Each MTANN acts as an expert for a specific type of non-nodule, e.g., five different MTANNs were trained to distinguish nodules from various-sized vessels; four other MTANNs were applied to eliminate some other opacities. The outputs of the MTANNs were combined by using the logical AND operation such that each of the trained MTANNs eliminated none of the nodules, but removed the specific type of non-nodule with which the MTANN was trained, and thus removed various types of non-nodules. The Multi-MTANN consisting of nine MTANNs was trained with 10 typical nodules and 10 non-nodules representing each of nine different non-nodule types (90 training non-nodules overall) in a training set. The trained Multi-MTANN was applied to the reduction of false positives reported by our current computerized scheme for lung nodule detection based on a database of 63 low-dose CT scans (1765

  18. Auditory Training Effects on the Listening Skills of Children With Auditory Processing Disorder.

    Science.gov (United States)

    Loo, Jenny Hooi Yin; Rosen, Stuart; Bamiou, Doris-Eva

    2016-01-01

    Children with auditory processing disorder (APD) typically present with "listening difficulties,"' including problems understanding speech in noisy environments. The authors examined, in a group of such children, whether a 12-week computer-based auditory training program with speech material improved the perception of speech-in-noise test performance, and functional listening skills as assessed by parental and teacher listening and communication questionnaires. The authors hypothesized that after the intervention, (1) trained children would show greater improvements in speech-in-noise perception than untrained controls; (2) this improvement would correlate with improvements in observer-rated behaviors; and (3) the improvement would be maintained for at least 3 months after the end of training. This was a prospective randomized controlled trial of 39 children with normal nonverbal intelligence, ages 7 to 11 years, all diagnosed with APD. This diagnosis required a normal pure-tone audiogram and deficits in at least two clinical auditory processing tests. The APD children were randomly assigned to (1) a control group that received only the current standard treatment for children diagnosed with APD, employing various listening/educational strategies at school (N = 19); or (2) an intervention group that undertook a 3-month 5-day/week computer-based auditory training program at home, consisting of a wide variety of speech-based listening tasks with competing sounds, in addition to the current standard treatment. All 39 children were assessed for language and cognitive skills at baseline and on three outcome measures at baseline and immediate postintervention. Outcome measures were repeated 3 months postintervention in the intervention group only, to assess the sustainability of treatment effects. The outcome measures were (1) the mean speech reception threshold obtained from the four subtests of the listening in specialized noise test that assesses sentence perception in

  19. [Assessment of the efficiency of the auditory training in children with dyslalia and auditory processing disorders].

    Science.gov (United States)

    Włodarczyk, Elżbieta; Szkiełkowska, Agata; Skarżyński, Henryk; Piłka, Adam

    2011-01-01

    To assess effectiveness of the auditory training in children with dyslalia and central auditory processing disorders. Material consisted of 50 children aged 7-9-years-old. Children with articulation disorders stayed under long-term speech therapy care in the Auditory and Phoniatrics Clinic. All children were examined by a laryngologist and a phoniatrician. Assessment included tonal and impedance audiometry and speech therapists' and psychologist's consultations. Additionally, a set of electrophysiological examinations was performed - registration of N2, P2, N2, P2, P300 waves and psychoacoustic test of central auditory functions: FPT - frequency pattern test. Next children took part in the regular auditory training and attended speech therapy. Speech assessment followed treatment and therapy, again psychoacoustic tests were performed and P300 cortical potentials were recorded. After that statistical analyses were performed. Analyses revealed that application of auditory training in patients with dyslalia and other central auditory disorders is very efficient. Auditory training may be a very efficient therapy supporting speech therapy in children suffering from dyslalia coexisting with articulation and central auditory disorders and in children with educational problems of audiogenic origin. Copyright © 2011 Polish Otolaryngology Society. Published by Elsevier Urban & Partner (Poland). All rights reserved.

  20. Development and process evaluation of a Web-based responsible beverage service training program.

    Science.gov (United States)

    Danaher, Brian G; Dresser, Jack; Shaw, Tracy; Severson, Herbert H; Tyler, Milagra S; Maxwell, Elisabeth D; Christiansen, Steve M

    2012-09-22

    Responsible beverage service (RBS) training designed to improve the appropriate service of alcohol in commercial establishments is typically delivered in workshops. Recently, Web-based RBS training programs have emerged. This report describes the formative development and subsequent design of an innovative Web-delivered RBS program, and evaluation of the impact of the program on servers' knowledge, attitudes, and self-efficacy. Formative procedures using focus groups and usability testing were used to develop a Web-based RBS training program. Professional alcohol servers (N = 112) who worked as servers and/or mangers in alcohol service settings were recruited to participate. A pre-post assessment design was used to assess changes associated with using the program. Participants who used the program showed significant improvements in their RBS knowledge, attitudes, and self-efficacy. Although the current study did not directly observe and determine impact of the intervention on server behaviors, it demonstrated that the development process incorporating input from a multidisciplinary team in conjunction with feedback from end-users resulted in creation of a Web-based RBS program that was well-received by servers and that changed relevant knowledge, attitudes, and self-efficacy. The results also help to establish a needed evidence base in support of the use of online RBS training, which has been afforded little research attention.

  1. Effect of washing process on the magnetic properties of Nd-Fe-B nanoparticles prepared by reduction-diffusion method

    Science.gov (United States)

    Wang, Y.; Ahn, J.; Kim, D.; Ren, W. J.; Liu, W.; Zhang, Z. D.; Choi, C. J.

    2017-10-01

    Nd-Fe-B nanoparticles with a particle size below 50 nm and excellent magnetic properties were obtained via a novel route which makes use of both spray drying and reduction-diffusion processes. Uniform Nd-Fe-B particles were formed by the optimization of Ca amount as a reducing agent and additional washing by milling in ethanol media. Especially, we implemented a two-step washing process which contributed to the excellent magnetic properties with high remanence and coercivity. After the removal of CaO by novel washing process, the maximum energy product (BH)max of the particles showed 22.1 MGOe. This value is superior to those reported in reduction-diffusion process. We used Henkel plot to assume the mechanism of magnetic interactions of the Nd-Fe-B nanoparticles.

  2. Implementation of the U.S. Environmental Protection Agency's Waste Reduction (WAR) Algorithm in Cape-Open Based Process Simulators

    Science.gov (United States)

    The Sustainable Technology Division has recently completed an implementation of the U.S. EPA's Waste Reduction (WAR) Algorithm that can be directly accessed from a Cape-Open compliant process modeling environment. The WAR Algorithm add-in can be used in AmsterChem's COFE (Cape-Op...

  3. SITE PROGRAM DEMONSTRATION ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS, BAY CITY, MICHIGAN TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The SITE Program funded a field demonstration to evaluate the Eco Logic Gas-Phase Chemical Reduction Process developed by ELI Eco Logic International Inc. (ELI), Ontario, Canada. The Demonstration took place at the Middleground Landfill in Bay City, Michigan using landfill wa...

  4. Controlled growth of gold nanoparticles in zeolite L via ion-exchange reactions and thermal reduction processes

    KAUST Repository

    Zeng, Shangjing

    2014-09-01

    The growth of gold nanoparticles in zeolite can be controlled using ion-exchange reactions and thermal reduction processes. We produce a number of different sizes of the gold nanoparticles with the particle size increasing with increased temperature of the final heat treatment. © 2014 Elsevier B.V.

  5. Click trains and the rate of information processing: does "speeding up" subjective time make other psychological processes run faster?

    Science.gov (United States)

    Jones, Luke A; Allely, Clare S; Wearden, John H

    2011-02-01

    A series of experiments demonstrated that a 5-s train of clicks that have been shown in previous studies to increase the subjective duration of tones they precede (in a manner consistent with "speeding up" timing processes) could also have an effect on information-processing rate. Experiments used studies of simple and choice reaction time (Experiment 1), or mental arithmetic (Experiment 2). In general, preceding trials by clicks made response times significantly shorter than those for trials without clicks, but white noise had no effects on response times. Experiments 3 and 4 investigated the effects of clicks on performance on memory tasks, using variants of two classic experiments of cognitive psychology: Sperling's (1960) iconic memory task and Loftus, Johnson, and Shimamura's (1985) iconic masking task. In both experiments participants were able to recall or recognize significantly more information from stimuli preceded by clicks than those preceded by silence.

  6. New image-processing and noise-reduction software reduces radiation dose during complex endovascular procedures.

    Science.gov (United States)

    Kirkwood, Melissa L; Guild, Jeffrey B; Arbique, Gary M; Tsai, Shirling; Modrall, J Gregory; Anderson, Jon A; Rectenwald, John; Timaran, Carlos

    2016-11-01

    A new proprietary image-processing system known as AlluraClarity, developed by Philips Healthcare (Best, The Netherlands) for radiation-based interventional procedures, claims to lower radiation dose while preserving image quality using noise-reduction algorithms. This study determined whether the surgeon and patient radiation dose during complex endovascular procedures (CEPs) is decreased after the implementation of this new operating system. Radiation dose to operators, procedure type, reference air kerma, kerma area product, and patient body mass index were recorded during CEPs on two Philips Allura FD 20 fluoroscopy systems with and without Clarity. Operator dose during CEPs was measured using optically stimulable, luminescent nanoDot (Landauer Inc, Glenwood, Ill) detectors placed outside the lead apron at the left upper chest position. nanoDots were read using a microStar ii (Landauer Inc) medical dosimetry system. For the CEPs in the Clarity group, the radiation dose to surgeons was also measured by the DoseAware (Philips Healthcare) personal dosimetry system. Side-by-side measurements of DoseAware and nanoDots allowed for cross-calibration between systems. Operator effective dose was determined using a modified Niklason algorithm. To control for patient size and case complexity, the average fluoroscopy dose rate and the dose per radiographic frame were adjusted for body mass index differences and then compared between the groups with and without Clarity by procedure. Additional factors, for example, physician practice patterns, that may have affected operator dose were inferred by comparing the ratio of the operator dose to procedural kerma area product with and without Clarity. A one-sided Wilcoxon rank sum test was used to compare groups for radiation doses, reference air kermas, and operating practices for each procedure type. The analysis included 234 CEPs; 95 performed without Clarity and 139 with Clarity. Practice patterns of operators during

  7. Directional Processing and Noise Reduction in Hearing Aids: Individual and Situational Influences on Preferred Setting.

    Science.gov (United States)

    Neher, Tobias; Wagener, Kirsten C; Fischer, Rosa-Linde

    2016-09-01

    A better understanding of individual differences in hearing aid (HA) outcome is a prerequisite for more personalized HA fittings. Currently, knowledge of how different user factors relate to response to directional processing (DIR) and noise reduction (NR) is sparse. To extend a recent study linking preference for DIR and NR to pure-tone average hearing thresholds (PTA) and cognitive factors by investigating if (1) equivalent links exist for different types of DIR and NR, (2) self-reported noise sensitivity and personality can account for additional variability in preferred DIR and NR settings, and (3) spatial target speech configuration interacts with individual DIR preference. Using a correlational study design, overall preference for different combinations of DIR and NR programmed into a commercial HA was assessed in a complex speech-in-noise situation and related to PTA, cognitive function, and different personality traits. Sixty experienced HA users aged 60-82 yr with controlled variation in PTA and working memory capacity took part in this study. All of them had participated in the earlier study, as part of which they were tested on a measure of "executive control" tapping into cognitive functions such as working memory, mental flexibility, and selective attention. Six HA settings based on unilateral (within-device) or bilateral (across-device) DIR combined with inactive, moderate, or strong single-microphone NR were programmed into a pair of behind-the-ear HAs together with individually prescribed amplification. Overall preference was assessed using a free-field simulation of a busy cafeteria situation with either a single frontal talker or two talkers at ±30° azimuth as the target speech. In addition, two questionnaires targeting noise sensitivity and the "Big Five" personality traits were administered. Data were analyzed using multiple regression analyses and repeated-measures analyses of variance with a focus on potential interactions between the HA

  8. Comparison of Theta/Beta, Slow Cortical Potential, and Adaptive Neurofeedback Training in Adults: Training Effects on Attentional Processes, Motor System, and Mood

    OpenAIRE

    Studer, Petra

    2011-01-01

    Neurofeedback (NF) training is being applied in an increasing number of clinical and peak performance fields. The aim oft he present investigation in adults was three-fold: 1) to shed further light on the neuronal mechanisms underlying different NF protocols with respect to attentional processes and motor system excitability, 2) to examine the effects of different neurofeedback protocols on well-being / mood, 3) to evaluate the effects of an adaptive type of NF training. Neurof...

  9. Selective catalytic reduction system and process for treating NOx emissions using a palladium and rhodium or ruthenium catalyst

    Science.gov (United States)

    Sobolevskiy, Anatoly [Orlando, FL; Rossin, Joseph A [Columbus, OH; Knapke, Michael J [Columbus, OH

    2011-07-12

    A process for the catalytic reduction of nitrogen oxides (NOx) in a gas stream (29) in the presence of H.sub.2 is provided. The process comprises contacting the gas stream with a catalyst system (38) comprising zirconia-silica washcoat particles (41), a pre-sulfated zirconia binder (44), and a catalyst combination (40) comprising palladium and at least one of rhodium, ruthenium, or a mixture of ruthenium and rhodium.

  10. The use of controlling-training software in civil engineering bachelors’ educational process

    Directory of Open Access Journals (Sweden)

    Rekunov Sergey

    2017-01-01

    Full Text Available The paper considers the current state of the higher education system of the Russian Federation in the context of teaching disciplines of strength cycle with the use of information educational technologies. The educational process in the discipline “Structural Mechanics” is shown by using the Controlling-Training Software on the sample program “Statically Determinate Plane Truss”. Such software was developed by employees of the Department of Structural Mechanics of the Institute of Architecture and Civil Engineering of Volgograd State Technical University to heighten student’s interest in calculations of building structures while using computer-based teaching methods, as well as to simplify the existing monitoring procedure. The Controlling-Training Software makes it possible not only to consolidate but also to independently assess the acquired theoretical knowledge. Working with this program displays all necessary information: the calculated scheme, the area of issues, an area with a commentary on the input response. Help files contain a sufficient amount of theoretical material with examples of solutions. Students have several attempts to enter their answer. If they are unsuccessful, then the screen displays the correct answer with visual graphic illustration and explanation of this issue. Carrying out the educational process by use of the Controlling-Training Software resulted in saving a significant amount of academic time.

  11. Detection of bursts in extracellular spike trains using hidden semi-Markov point process models.

    Science.gov (United States)

    Tokdar, Surya; Xi, Peiyi; Kelly, Ryan C; Kass, Robert E

    2010-08-01

    Neurons in vitro and in vivo have epochs of bursting or "up state" activity during which firing rates are dramatically elevated. Various methods of detecting bursts in extracellular spike trains have appeared in the literature, the most widely used apparently being Poisson Surprise (PS). A natural description of the phenomenon assumes (1) there are two hidden states, which we label "burst" and "non-burst," (2) the neuron evolves stochastically, switching at random between these two states, and (3) within each state the spike train follows a time-homogeneous point process. If in (2) the transitions from non-burst to burst and burst to non-burst states are memoryless, this becomes a hidden Markov model (HMM). For HMMs, the state transitions follow exponential distributions, and are highly irregular. Because observed bursting may in some cases be fairly regular-exhibiting inter-burst intervals with small variation-we relaxed this assumption. When more general probability distributions are used to describe the state transitions the two-state point process model becomes a hidden semi-Markov model (HSMM). We developed an efficient Bayesian computational scheme to fit HSMMs to spike train data. Numerical simulations indicate the method can perform well, sometimes yielding very different results than those based on PS.

  12. New understanding on separation of Mn and Fe from ferruginous manganese ores by the magnetic reduction roasting process

    Science.gov (United States)

    Liu, Bingbing; Zhang, Yuanbo; Wang, Juan; Wang, Jia; Su, Zijian; Li, Guanghui; Jiang, Tao

    2018-06-01

    Magnetic reduction roasting followed by magnetic separation process is reported as a simple route to realize separation of Mn and Fe from ferruginous manganese ores (Fe-Mn ores). However, the separation and recovery of Mn and Fe oxides are not very effective. This work clarified the underlying reason for the poor separation and also proposed some suggestions for the magnetic reduction process. In this work, the effect of temperature on the magnetic reduction roasting - magnetic separation of Fe-Mn ore was investigated firstly. Then the reduction behaviors of MnO2-Fe2O3 system and MnO2-Fe2O3-10 wt.%SiO2 system under 10 vol.% CO-90 vol.% CO2 at 600-1000 °C were investigated by XRD, XPS, SEM-EDS, VSM, DSC and thermodynamics analyses. Reduction and separation tests showed that higher reduction temperature was beneficial to the recovery of iron while it's not in favor of the recovery of manganese when the temperature was over 800 °C. The formation of composite oxide MnxFe3-xO4 with strong magnetism between the interface of the MnO2 and Fe2O3 particles leaded to the poor separation of iron and manganese. In addition, the formation mechanism of MnxFe3-xO4 from MnO2 and Fe2O3 as well as the interface reaction reduced under 10 vol.% CO was discussed in this study. Finally, some suggestions were recommended for the magnetic reduction roasting for utilizing the Fe-Mn ores effectively.

  13. Reductive dechlorination of trichloroacetic acid (TCAA) by electrochemical process over Pd-In/Al_2O_3 catalyst

    International Nuclear Information System (INIS)

    Liu, Yanzhen; Mao, Ran; Tong, Yating; Lan, Huachun; Zhang, Gong; Liu, Huijuan; Qu, Jiuhui

    2017-01-01

    Highlights: • TCAA was efficiently removed by Pd-In/Al_2O_3 based electro-reductive process. • The active species for TCAA electroreduction involved electron (e"−) and atomic H*. • The atomic H* played a major contribution to TCAA removal. - Abstract: Electrochemical reduction treatment was found to be a promising method for dechlorination of Trichloroacetic acid (TCAA), and acceleration of electron transfer or enhancement of the concentration of atomic H* significantly improve the electrochemical dechlorination process. Bimetallic Pd-based catalysts have the unique property of simultaneously catalyzing the production of atomic H* and reducing target pollutants. Herein, a bimetallic Pd–In electrocatalyst with atomic ratio of 1:1 was evenly deposited on an Al_2O_3 substrate, and the bimetallic Pd-In structure was confirmed via X-ray photoelectron spectroscopy (XPS). Electrochemical removal of trichloroacetic acid (TCAA) by the Pd-In/Al_2O_3 catalyst was performed in a three-dimensional reactor. 94% of TCAA with the initial concentration of 500 μg L"−"1 could be degraded within 30 min under a relatively low current density (0.9 mA cm"−"2). In contrast to the presence of refractory intermediates (dichloroacetic acid (DCAA)) found in the Pd/Al_2O_3 system, TCAA could be thoroughly reduced to monochloroacetic acid (MCAA) using Pd-In/Al_2O_3 catalysts. According to scavenger experiments, an electron transfer process and atomic H* formation function both existed in the TCAA reduction process, and the enhanced indirect atomic H* reduction process (confirmed by ESR signals) played a chief role in the TCAA removal. Moreover, the synergistic effects of Pd and In were proven to be able to enhance both direct electron transfer and indirect atomic H* formation, indicating a promising prospect for bimetallic electrochemical reduction treatment.

  14. Bomb reduction of uranium tetrafluoride. Part II: Influence of the addition elements in the reduction process; Reduccion del tetrafluoruro de uranio en bomba cerrada. Parte II: Influencia de elementos de adicion en la reducion

    Energy Technology Data Exchange (ETDEWEB)

    Anca Abati, R; Lopez Rodriguez, M

    1962-07-01

    This work shows the influence of uranium oxide and uranyl fluoride in the reduction of uranium with Ca and Mg. These additions are more harmful when using smaller bombs. The uranyl fluoride has influence in the reduction process; the curves yield-concentration shows two regions depending upon the salt concentration. The behaviour of this addition in these regions can be explained following the different decompositions that can take place during the reduction process. (Author) 9 refs.

  15. [Analysis of carbon balance and study on mechanism in anoxic-oxic-settling-anaerobic sludge reduction process].

    Science.gov (United States)

    Zhai, Xiao-Min; Gao, Xu; Zhang, Man-Man; Jia, Li; Guo, Jin-Song

    2012-07-01

    In order to deeply explore the mechanism of sludge reduction in OSA system, carbon balance was performed in an anoxic-oxic-settling-anaerobic (A + OSA) system and a reference AO system to investigate effects of inserting a sludge holding tank in sludge cycle line on the sludge reduction process. Meanwhile, carbon mass change in each reaction unit was identified in terms of solid, liquid and gas phases. The causes of excess sludge reduction in A + OSA system were deduced. The carbon balance results show that when the hydraulic retention time in the sludge holding tank is 7.14 h, carbon percent in solid phase of the sludge reduction system is nearly 50% higher than that of the reference system, supporting the consequence that sludge reduction rate of 49.98% had been achieved. The insertion of a sludge holding tank in the sludge return circuit can be effective in sludge reduction. Carbon changes in each unit reveal that the amount of carbon consumed for biosynthesis in the anoxic and oxic tanks (main reaction zone) of the sludge reduction system is higher than in that of the reference system. Sludge decay is observed in the sludge holding tank. Furthermore, CH4 released from the sludge holding tank is significantly higher than that from the main reaction zone. The DGGE profiles show that there are hydrolytic-fermentative bacteria in the sludge holding tank related to sludge decay. The excess sludge reduction in the A + OSA system could be a result of the combination of sludge decay in the sludge holding tank and sludge compensatory growth in the main reaction cell.

  16. Relationships between music training, speech processing, and word learning: a network perspective.

    Science.gov (United States)

    Elmer, Stefan; Jäncke, Lutz

    2018-03-15

    Numerous studies have documented the behavioral advantages conferred on professional musicians and children undergoing music training in processing speech sounds varying in the spectral and temporal dimensions. These beneficial effects have previously often been associated with local functional and structural changes in the auditory cortex (AC). However, this perspective is oversimplified, in that it does not take into account the intrinsic organization of the human brain, namely, neural networks and oscillatory dynamics. Therefore, we propose a new framework for extending these previous findings to a network perspective by integrating multimodal imaging, electrophysiology, and neural oscillations. In particular, we provide concrete examples of how functional and structural connectivity can be used to model simple neural circuits exerting a modulatory influence on AC activity. In addition, we describe how such a network approach can be used for better comprehending the beneficial effects of music training on more complex speech functions, such as word learning. © 2018 New York Academy of Sciences.

  17. Transfer of training between music and speech: common processing, attention and memory

    Directory of Open Access Journals (Sweden)

    Mireille eBesson

    2011-05-01

    Full Text Available After a brief historical perspective of the relationship between language and music, we review our work on transfer of training from music to speech that aimed at testing the general hypothesis that musicians should be more sensitive than nonmusicians to speech sounds. In light of recent results in the literature, we argue that when long-term experience in one domain influences acoustic processing in the other domain, results can be interpreted as common acoustic processing. But when long-term experience in one domain influences the building-up of abstract and specific percepts in another domain, results are taken as evidence for transfer of training effects. Moreover, we also discuss the influence of attention and working memory on transfer effects and we highlight the usefulness of the Event-Related Potentials method to disentangle the different processes that unfold in the course of music and speech perception. Finally, we give an overview of an on-going longitudinal project with children aimed at testing transfer effects from music to different levels and aspects of speech processing.

  18. Transfer of Training between Music and Speech: Common Processing, Attention, and Memory.

    Science.gov (United States)

    Besson, Mireille; Chobert, Julie; Marie, Céline

    2011-01-01

    After a brief historical perspective of the relationship between language and music, we review our work on transfer of training from music to speech that aimed at testing the general hypothesis that musicians should be more sensitive than non-musicians to speech sounds. In light of recent results in the literature, we argue that when long-term experience in one domain influences acoustic processing in the other domain, results can be interpreted as common acoustic processing. But when long-term experience in one domain influences the building-up of abstract and specific percepts in another domain, results are taken as evidence for transfer of training effects. Moreover, we also discuss the influence of attention and working memory on transfer effects and we highlight the usefulness of the event-related potentials method to disentangle the different processes that unfold in the course of music and speech perception. Finally, we give an overview of an on-going longitudinal project with children aimed at testing transfer effects from music to different levels and aspects of speech processing.

  19. Possibilities of Formation of Dioxins and Furans in Metallurgical Processes as well as Methods of their Reduction

    Directory of Open Access Journals (Sweden)

    Holtzer, M.

    2007-01-01

    Full Text Available The metallurgical industry, among others, generates various kinds of wastes: gaseous, dusts, wastes and sewage. Special attention of the European Union is directed towards the elimination or significant reduction of the gaseous-dust contamination emissions including the most hazardous compounds, such as dioxins and furans. In the article the sources of dioxins and furans in metallurgical industry are described along with the reduction methods of these pollutants. Particularly the activities recommended as the Best Available Techniques (BAT in order to reduce the PCDD/PCDF emission from sintering processes, non-ferrous metallurgy and foundry engineering have been presented.

  20. Optimization of palm oil physical refining process for reduction of 3-monochloropropane-1,2-diol (3-MCPD) ester formation.

    Science.gov (United States)

    Zulkurnain, Musfirah; Lai, Oi Ming; Tan, Soo Choon; Abdul Latip, Razam; Tan, Chin Ping

    2013-04-03

    The reduction of 3-monochloropropane-1,2-diol (3-MCPD) ester formation in refined palm oil was achieved by incorporation of additional processing steps in the physical refining process to remove chloroester precursors prior to the deodorization step. The modified refining process was optimized for the least 3-MCPD ester formation and acceptable refined palm oil quality using response surface methodology (RSM) with five processing parameters: water dosage, phosphoric acid dosage, degumming temperature, activated clay dosage, and deodorization temperature. The removal of chloroester precursors was largely accomplished by increasing the water dosage, while the reduction of 3-MCPD esters was a compromise in oxidative stability and color of the refined palm oil because some factors such as acid dosage, degumming temperature, and deodorization temperature showed contradictory effects. The optimization resulted in 87.2% reduction of 3-MCPD esters from 2.9 mg/kg in the conventional refining process to 0.4 mg/kg, with color and oil stability index values of 2.4 R and 14.3 h, respectively.

  1. Extubation process in bed-ridden elderly intensive care patients receiving inspiratory muscle training: a randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Cader SA

    2012-10-01

    Full Text Available Samária Ali Cader,1 Rodrigo Gomes de Souza Vale,1 Victor Emmanuel Zamora,2 Claudia Henrique Costa,2 Estélio Henrique Martin Dantas11Laboratory of Human Kinetics Bioscience, Federal University of Rio de Janeiro State, 2Pedro Ernesto University Hospital, School of Medicine, State University of Rio de Janeiro, Rio de Janeiro, BrazilBackground: The purpose of this study was to evaluate the extubation process in bed-ridden elderly intensive care patients receiving inspiratory muscle training (IMT and identify predictors of successful weaning.Methods: Twenty-eight elderly intubated patients in an intensive care unit were randomly assigned to an experimental group (n = 14 that received conventional physiotherapy plus IMT with a Threshold IMT® device or to a control group (n = 14 that received only conventional physiotherapy. The experimental protocol for muscle training consisted of an initial load of 30% maximum inspiratory pressure, which was increased by 10% daily. The training was administered for 5 minutes, twice daily, 7 days a week, with supplemental oxygen from the beginning of weaning until extubation. Successful extubation was defined by the ventilation time measurement with noninvasive positive pressure. A vacuum manometer was used for measurement of maximum inspiratory pressure, and the patients' Tobin index values were measured using a ventilometer.Results: The maximum inspiratory pressure increased significantly (by 7 cm H2O, 95% confidence interval [CI] 4–10, and the Tobin index decreased significantly (by 16 breaths/min/L, 95% CI −26 to 6 in the experimental group compared with the control group. The Chi-squared distribution did not indicate a significant difference in weaning success between the groups (Χ2 = 1.47; P = 0.20. However, a comparison of noninvasive positive pressure time dependence indicated a significantly lower value for the experimental group (P = 0.0001; 95% CI 13.08–18.06. The receiver

  2. Mindfulness Training and Reductions in Teacher Stress and Burnout: Results from Two Randomized, Waitlist-Control Field Trials

    Science.gov (United States)

    Roeser, Robert W.; Schonert-Reichl, Kimberly A.; Jha, Amishi; Cullen, Margaret; Wallace, Linda; Wilensky, Rona; Oberle, Eva; Thomson, Kimberly; Taylor, Cynthia; Harrison, Jessica

    2013-01-01

    The effects of randomization to mindfulness training (MT) or to a waitlist-control condition on psychological and physiological indicators of teachers' occupational stress and burnout were examined in 2 field trials. The sample included 113 elementary and secondary school teachers (89% female) from Canada and the United States. Measures were…

  3. An evaluation of low volume high-intensity intermittent training (HIIT) for health risk reduction in overweight and obese men.

    Science.gov (United States)

    Kelly, Benjamin M; Xenophontos, Soteris; King, James A; Nimmo, Myra A

    2017-01-01

    Both sprint interval training (SIT) and high-intensity intermittent training (HIIT) have been described as time-efficient strategies for inducing favourable metabolic and cardiorespiratory adaptations in healthy and diseased participants. To date, little attention has been given to profiling the potential health benefits of HIIT or modified HIIT training within overweight and obese cohorts with particular focus on inflammation. Within this pilot trial, we tested the hypothesis that 6 sessions of HIIT performed over 2 weeks with 1-2 days' rest would improve aerobic capacity, glucose metabolism and inflammatory profile in an overweight and obese male cohort. Additionally, we profiled the potential health benefits of 4 HIIT sessions performed over the same period. 18 overweight or obese males (BMI = 31.2 ± 3.6; V̇O 2  = 30.3 ± 4.4 ml.kg.min -1 ) were studied before and 72 h after HIIT. Training sessions consisted of 10 x 1 min intervals at 90% HR peak separated by 1 min recovery periods. Exercise was performed either 6 (group 1, n  = 8) or 4 (group 2, n  = 10) times over a 2 week period. After training no changes were detected from baseline for body composition, aerobic capacity, glucose metabolism or inflammatory profile ( p  > 0.05) in either group. Both 6 and 4 sessions of HIIT performed over a 2-week period are ineffective in improving selected health markers within an overweight and obese cohort. This trial reports data from human participants and was retrospectively registered on 22/02/2017 with the ISRCTN registry, trial number ISRCTN90672085.

  4. Preliminary design for an institutional needs assessment process to guide the development of training programs at the Department of Energy Central Training Academy

    International Nuclear Information System (INIS)

    Golder, T.; Laktasic, S.

    1987-01-01

    In order to provide and maintain a high level of nuclear security at DOE installations, the Office of Safeguards and Security (OSS) is charged with the deployment of highly trained security staff at each DOE site. Faced with this mission, OSS must ensure that both Safeguards and Security personnel are adequately trained to meet present as well as potential future insider and outside threats. A major step toward meeting this goal was to begin to standardize training, establish an elite training cadre, and create a central training facility to implement training for safeguards and security personnel. These requirements were actualized by the creation of the Central Training Academy. After a 9 month start-up and 2 years of initial operation, the CTA can now provide a historical perspective on its evolution, early program development, and future plans and challenges. Central to future program planning at the Academy is the development and implementation of an internal DOE needs assessment process which is the focus of this study. Once institutionalized, the system would allow for the Academy to accurately assess and translate OSS needs into requirements for both OSS Safeguards and Security personnel and place the Academy in position to develop and tailor Tactical and Specialized programs that reflect and respond to changing threats and technological advances

  5. Efficiency of developing 15–17-year weightlifters’ training process for a one-year macrocycle with the use of various speed and strength training methods

    Directory of Open Access Journals (Sweden)

    Oleksandr Piven

    2017-10-01

    Full Text Available Purpose: developed and experimentally tested the construction of the training process of weightlifters of 15–17 years during a one-year macrocycle with the use of various speed and strength training methods. Material & Methods: to the experiment were attracted 30 young weightlifters at the age of 15–17 years, they all had II and III sports categories. Results: it was found that the athletes of the experimental group who used the unconventional training method, using different training regimes – isokinetic, plyometric, half-dynamic, impact method with speed-strength training, which included jumping with various devices in depth and jumping out, after the experiment, they improved their strengths in the amount of the duathlon by 16,5 kg, and also set their own records in contrast to the control group that trained by the traditional method and improved the power results by 7,2 kg. Conclusion: it is established that the use of non-traditional methods for the development of speed-strength qualities of weightlifters, namely, different training regimes – isokinetic, plyometric, half-dynamic, shock method, contributes to the more efficient development of speed-strength qualities, and, consequently, leads to an increase in sports performance in weightlifting.

  6. Training manual for process operation and management of radioactive waste treatment facility

    Energy Technology Data Exchange (ETDEWEB)

    Shon, J. S.; Kim, K. J.; Ahn, S. J. [and others

    2004-12-01

    Radioactive Waste Treatment Facility (RWTF) has been operating for safe and effective treatment of radioactive wastes generated in the Korea Atomic Energy Research Institute (KAERI). In RWTF, there are evaporation, bituminization and solar evaporation processes for liquid waste, solid waste treatment process and laundry process. As other radioactive waste treatment facilities in foreign countries, the emergency situation such as fire and overflow of liquid waste can be taken place during the operation and result in the spread of contamination of radioactivity. So, easy and definite operating procedure is necessary for the safe operation of the facility. This manual can be available as easy and concise training materials for new employees and workers dispatched from service agency. Especially, in case of emergency urgently occurred during operation, everyone working in the facility can quickly stop the facility following this procedure.

  7. Training manual for process operation and management of radioactive waste treatment facility

    International Nuclear Information System (INIS)

    Shon, J. S.; Kim, K. J.; Ahn, S. J.

    2004-12-01

    Radioactive Waste Treatment Facility (RWTF) has been operating for safe and effective treatment of radioactive wastes generated in the Korea Atomic Energy Research Institute (KAERI). In RWTF, there are evaporation, bituminization and solar evaporation processes for liquid waste, solid waste treatment process and laundry process. As other radioactive waste treatment facilities in foreign countries, the emergency situation such as fire and overflow of liquid waste can be taken place during the operation and result in the spread of contamination of radioactivity. So, easy and definite operating procedure is necessary for the safe operation of the facility. This manual can be available as easy and concise training materials for new employees and workers dispatched from service agency. Especially, in case of emergency urgently occurred during operation, everyone working in the facility can quickly stop the facility following this procedure

  8. Teacher Training in a Synchronous Cyber Face-to-Face Classroom: Characterizing and Supporting the Online Teachers' Learning Process

    Science.gov (United States)

    Wang, Yuping; Chen, Nian-Shing; Levy, Mike

    2010-01-01

    This article discusses the learning process undertaken by language teachers in a cyber face-to-face teacher training program. Eight tertiary Chinese language teachers attended a 12-week training program conducted in an online synchronous learning environment characterized by multimedia-based, oral and visual interaction. The term "cyber…

  9. Formation of Various Competencies in the Process of Training the Future Music Teachers at the Present Stage

    Science.gov (United States)

    Kovalev, Dmitry A.; Khussainova, Gulzada A.; Balagazova, Svetlana T.; Zhankul, Tamarasar

    2016-01-01

    The article is devoted to professional training of future music teachers. Based on the analysis of domestic and foreign studies, the authors proved the importance of studying this problem and focusing on different pedagogical aspects. The study of this topic in general shows that the process of training the future music teachers has its own…

  10. The Introduction of Data Processing in Middle-Level Accountancy Training Programs in Developing Countries: A Case Study.

    Science.gov (United States)

    Schramm, Karin

    1985-01-01

    Examines the impact of introducing data processing in middle-level accountancy training programs in Botswana. Hardware and software considerations for the program are also examined. Since the beginning of the program, some 300 students have been trained in accounting. (JN)

  11. Reduction of aerobic and lactic acid bacteria in dairy desludge using an integrated compressed CO2 and ultrasonic process.

    Science.gov (United States)

    Overton, Tim W; Lu, Tiejun; Bains, Narinder; Leeke, Gary A

    Current treatment routes are not suitable to reduce and stabilise bacterial content in some dairy process streams such as separator and bactofuge desludges which currently present a major emission problem faced by dairy producers. In this study, a novel method for the processing of desludge was developed. The new method, elevated pressure sonication (EPS), uses a combination of low frequency ultrasound (20 kHz) and elevated CO 2 pressure (50 to 100 bar). Process conditions (pressure, sonicator power, processing time) were optimised for batch and continuous EPS processes to reduce viable numbers of aerobic and lactic acid bacteria in bactofuge desludge by ≥3-log fold. Coagulation of proteins present in the desludge also occurred, causing separation of solid (curd) and liquid (whey) fractions. The proposed process offers a 10-fold reduction in energy compared to high temperature short time (HTST) treatment of milk.

  12. Maglev Train Signal Processing Architecture Based on Nonlinear Discrete Tracking Differentiator

    Directory of Open Access Journals (Sweden)

    Zhiqiang Wang

    2018-05-01

    Full Text Available In a maglev train levitation system, signal processing plays an important role for the reason that some sensor signals are prone to be corrupted by noise due to the harsh installation and operation environment of sensors and some signals cannot be acquired directly via sensors. Based on these concerns, an architecture based on a new type of nonlinear second-order discrete tracking differentiator is proposed. The function of this signal processing architecture includes filtering signal noise and acquiring needed signals for levitation purposes. The proposed tracking differentiator possesses the advantages of quick convergence, no fluttering, and simple calculation. Tracking differentiator’s frequency characteristics at different parameter values are studied in this paper. The performance of this new type of tracking differentiator is tested in a MATLAB simulation and this tracking-differentiator is implemented in Very-High-Speed Integrated Circuit Hardware Description Language (VHDL. In the end, experiments are conducted separately on a test board and a maglev train model. Simulation and experiment results show that the performance of this novel signal processing architecture can fulfill the real system requirement.

  13. A High Precision Position Sensor Design and Its Signal Processing Algorithm for a Maglev Train

    Directory of Open Access Journals (Sweden)

    Wensen Chang

    2012-04-01

    Full Text Available High precision positioning technology for a kind of high speed maglev train with an electromagnetic suspension (EMS system is studied. At first, the basic structure and functions of the position sensor are introduced and some key techniques to enhance the positioning precision are designed. Then, in order to further improve the positioning signal quality and the fault-tolerant ability of the sensor, a new kind of discrete-time tracking differentiator (TD is proposed based on nonlinear optimal control theory. This new TD has good filtering and differentiating performances and a small calculation load. It is suitable for real-time signal processing. The stability, convergence property and frequency characteristics of the TD are studied and analyzed thoroughly. The delay constant of the TD is figured out and an effective time delay compensation algorithm is proposed. Based on the TD technology, a filtering process is introduced in to improve the positioning signal waveform when the sensor is under bad working conditions, and a two-sensor switching algorithm is designed to eliminate the positioning errors caused by the joint gaps of the long stator. The effectiveness and stability of the sensor and its signal processing algorithms are proved by the experiments on a test train during a long-term test run.

  14. Maglev Train Signal Processing Architecture Based on Nonlinear Discrete Tracking Differentiator.

    Science.gov (United States)

    Wang, Zhiqiang; Li, Xiaolong; Xie, Yunde; Long, Zhiqiang

    2018-05-24

    In a maglev train levitation system, signal processing plays an important role for the reason that some sensor signals are prone to be corrupted by noise due to the harsh installation and operation environment of sensors and some signals cannot be acquired directly via sensors. Based on these concerns, an architecture based on a new type of nonlinear second-order discrete tracking differentiator is proposed. The function of this signal processing architecture includes filtering signal noise and acquiring needed signals for levitation purposes. The proposed tracking differentiator possesses the advantages of quick convergence, no fluttering, and simple calculation. Tracking differentiator's frequency characteristics at different parameter values are studied in this paper. The performance of this new type of tracking differentiator is tested in a MATLAB simulation and this tracking-differentiator is implemented in Very-High-Speed Integrated Circuit Hardware Description Language (VHDL). In the end, experiments are conducted separately on a test board and a maglev train model. Simulation and experiment results show that the performance of this novel signal processing architecture can fulfill the real system requirement.

  15. A high precision position sensor design and its signal processing algorithm for a maglev train.

    Science.gov (United States)

    Xue, Song; Long, Zhiqiang; He, Ning; Chang, Wensen

    2012-01-01

    High precision positioning technology for a kind of high speed maglev train with an electromagnetic suspension (EMS) system is studied. At first, the basic structure and functions of the position sensor are introduced and some key techniques to enhance the positioning precision are designed. Then, in order to further improve the positioning signal quality and the fault-tolerant ability of the sensor, a new kind of discrete-time tracking differentiator (TD) is proposed based on nonlinear optimal control theory. This new TD has good filtering and differentiating performances and a small calculation load. It is suitable for real-time signal processing. The stability, convergence property and frequency characteristics of the TD are studied and analyzed thoroughly. The delay constant of the TD is figured out and an effective time delay compensation algorithm is proposed. Based on the TD technology, a filtering process is introduced in to improve the positioning signal waveform when the sensor is under bad working conditions, and a two-sensor switching algorithm is designed to eliminate the positioning errors caused by the joint gaps of the long stator. The effectiveness and stability of the sensor and its signal processing algorithms are proved by the experiments on a test train during a long-term test run.

  16. Technical training seminar: Data Converters and Linear Products for Signal Processing and Control

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Monday 23 January 2006 TECHNICAL TRAINING SEMINAR from 14:00 to 17:30, Training Centre Auditorium (bldg. 503) Data Converters and Linear Products for Signal Processing and Control Marco Corsi, William Bright, Olrik Maier, Andrea Huder / TEXAS INSTRUMENTS (US, D, CH) Texas Instruments will present recent technology advances in design and manufacturing of A/D and D/A converters, and of operational amplifiers. 14:00 - 15:30 HIGH SPEED - Technology and the new process BiCom3: High speed ADCs, DACs, operational amplifiers 15:30 - 15:45 coffee 15:45 - 17:15 HIGH PRECISION - Technology and the new process HPA07: High precision ADCs, DACs, operational amplifiers questions, discussion Industrial partners: Robert Medioni, François Caloz Spoerle Electronic, CH-1440 Montagny (VD), Switzerland Phone: + 41 24 447 01 37, email: RMedioni@spoerle.com, http://www.spoerle.com Language: English. Free seminar (no registration). Organiser: Davide Vitè / HR-PMD-ATT / 75141 For more information, visit the Te...

  17. Passive energy jitter reduction in the cascaded third harmonic generation process

    International Nuclear Information System (INIS)

    Yan, L; Du, Y; You, Y; Sun, X; Wang, D; Hua, J; Shi, J; Lu, W; Huang, W; Chen, H; Tang, C; Huang, Z

    2014-01-01

    In free electron laser (FEL) systems with ultraviolet (UV) laser driven injectors, a highly stable UV source generated through cascaded third harmonic generation (THG) from an infrared (IR) source is a key element in guaranteeing the acceptable current jitter at the undulator. In this letter, the negative slope of the THG efficiency for high intensity ultrashort IR pulses is revealed to be a passive stabilization mechanism for energy jitter reduction in UV. A reduction of 2.5 times the energy jitter in UV is demonstrated in the experiment and simulations show that the energy jitter in UV can be reduced by more than one order of magnitude if the energy jitter in IR is less than 3%, with proper design of the THG efficiency curve, fulfilling the challenging requirement for UV laser stability in a broad scope of applications such as the photoinjector of x-ray FELs. (letter)

  18. Men’s artistic gymnastics: is the use of elastic surfaces systematic in the training process?

    Directory of Open Access Journals (Sweden)

    Marco Antonio Coelho BORTOLETO

    2016-03-01

    Full Text Available Abstract In Artistic Gymnastics, the area (the apparatus represents the most relevant systemic component. Thus, when one strives to comprehend the internal logic of this sport, the gymnast-apparatus relationship warrants special attention. A change in the training paradigm was observed, showing that the use of Elastic Surfaces (ES is an essential resource, due to the contemporary features of this sport, such as the hyper-valorisation of acrobatics and a greater presence of flight elements. Through a case study developed in a men’s artistic gymnastics high-performance gymnasium, this study analysed the use of different ES in the training process. Although coaches recognize the importance of ES in training programs, the record of daily activities showed that this use is still limited to select equipment and is not systematic. Such difficulties are due mainly to the lack of educational programs to the development of certain specific methodologies and the non-existence of national equipment suppliers certified by International Gymnastics Federation.

  19. Development of corrosion resistant materials for an electrolytic reduction process of a spent nuclear fuel

    International Nuclear Information System (INIS)

    Jong-Hyeon Lee; Soo-Haeng Cho; Jeong-Gook Oh; Eung-Ho Kim

    2008-01-01

    New alloys were designed and prepared to improve their corrosion resistance in an electrolytic reduction environment for a spent oxide fuel on the basis of a thermodynamical assessment. A considerable solubility of Si was confirmed in the Ni alloys and their corrosion resistance was drastically increased with the addition of Si. It was confirmed that a protective oxide layer was formed during a corrosion test due to a reaction among the alloying elements such as Cr, Al and Si. (authors)

  20. Susceptibility of optimal train schedules to stochastic disturbances of process times

    DEFF Research Database (Denmark)

    Larsen, Rune; Pranzo, Marco; D’Ariano, Andrea

    2013-01-01

    study, an advanced branch and bound algorithm, on average, outperforms a First In First Out scheduling rule both in deterministic and stochastic traffic scenarios. However, the characteristic of the stochastic processes and the way a stochastic instance is handled turn out to have a serious impact...... and dwell times). In fact, the objective of railway traffic management is to reduce delay propagation and to increase disturbance robustness of train schedules at a network scale. We present a quantitative study of traffic disturbances and their effects on the schedules computed by simple and advanced...

  1. Process evaluation of a Toolbox-training program for construction foremen in Denmark

    DEFF Research Database (Denmark)

    Jeschke, Katharina Christiane; Kines, Pete; Rasmussen, Liselotte

    2017-01-01

    foremen’s knowledge and communication skills in daily planning of work tasks and their related OSH risks on construction sites. The program builds on the popular 'toolbox meeting' concept, however there is very little research evaluating these types of meetings. This article describes the development...... and revised until the final version after the fifth group. The evaluation utilized an action research strategy with a mixed–methods approach of triangulating questionnaire, interview, and observation data. Process evaluation results showed that the eight Toolbox-training topics were relevant and useful...

  2. Training and evaluation of neural networks for multi-variate time series processing

    DEFF Research Database (Denmark)

    Fog, Torben L.; Larsen, Jan; Hansen, Lars Kai

    1995-01-01

    We study the training and generalization for multi-variate time series processing. It is suggested to used a quasi-maximum likelihood approach rather than the standard sum of squared errors, thus taking dependencies among the errors of the individual time series into account. This may lead...... to improved generalization performance. Further, we extend the optimal brain damage pruning technique to the multi-variate case. A key ingredient is an algebraic expression for the generalization ability of a multi-variate model. The variability of the suggested techniques are successfully demonstrated...

  3. Sodium Reduction in Processed Foods in Brazil: Analysis of Food Categories and Voluntary Targets from 2011 to 2017.

    Science.gov (United States)

    Nilson, Eduardo A F; Spaniol, Ana M; Gonçalves, Vivian S S; Moura, Iracema; Silva, Sara A; L'Abbé, Mary; Jaime, Patricia C

    2017-07-12

    Non-communicable diseases, including cardiovascular diseases, are responsible for over 70% of deaths in Brazil. Currently, over 25% of Brazilian adults are diagnosed as hypertensive; overall, current dietary sodium intake in Brazil (4700 mg/person) is over twice the international recommendations, and 70-90% of adolescents and adults consume excessive sodium. National sodium reduction strategies consider the main dietary sources of sodium to be added salt to foods, foods consumed outside of the household, and sodium in processed foods. The national voluntary strategy for sodium reduction in priority food categories has been continuously monitored over a 6-year period (2011-2017) and there was a significant 8-34% reduction in the average sodium content of over half food categories. Different food categories have undergone differing reductions in sodium over time, aiding gradual biannual targets to allow industries to develop new technologies and consumers to adapt to foods with less salt. By 2017, most products of all food categories had met the regional targets proposed by the Pan American Health Organization, showing that voluntary sodium reduction strategies can potentially contribute to food reformulation. Nevertheless, regulatory approaches may still be necessary in the future in order to reach all food producers and to allow stronger enforcement to meet more stringent regional targets.

  4. Electrochemical reduction of carbon dioxide to formate with Fe-C electrodes in anaerobic sludge digestion process.

    Science.gov (United States)

    Zhao, Zisheng; Zhang, Yaobin; Li, Yang; Zhao, Huimin; Quan, Xie

    2016-12-01

    Electrochemical reduction of carbon dioxide (CO 2 ) to useful chemicals is an attractive strategy to cut its emission in atmosphere. However, high overpotential and energy consumption required in the electrochemical reduction are the major barriers of this process. In this study, a new CO 2 reduction technique for production of formic acid was proposed from waste activated sludge digestion in a microbial electrosynthesis system (MES) with iron plate and carbon pillar as the electrodes. Compared with other reactors, methane production of the Fe-C MES reactor was slightly lower and CO 2 was undetectable. Instead, considerable formate (672.3 mg/L) and H 2 (45.8 mL) were produced in this Fe-C MES reactor, but not found in the other reactors. It should be ascribed to the reduction of CO 2 and H + at cathode. The reduction of H + resulted in a weak alkaline pH (9.3), which made the methanogenesis slightly lower in Fe-C MES. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Facile synthesis of reduced graphene oxide nanosheets by a sodium diphenylamine sulfonate reduction process and its electrochemical property

    International Nuclear Information System (INIS)

    Ji, Yunzhou; Liu, Qi; Cheng, Meiling; Lai, Lifang; Li, Zhanfeng; Peng, Yuxin; Yang, Yong

    2013-01-01

    We report a new method to convert graphene oxide (GO) to stable colloidal dispersion of reduced graphene oxide nanosheets (RGONS) using sodium diphenylamine sulfonate (SDAS) as a reductant, as well as itself and its redox product as the stabilizer. The as-prepared RGONS have been characterized by X-ray diffraction, Fourier transform infrared spectroscopy, UV–visible spectroscopy, thermo-gravimetric analysis, scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, atomic force microscopy and Raman spectroscopy. The results indicate that the bulk of oxygen-containing functional groups from GO have been removed. Based on the cyclic voltammogram (CV) analyses, it is found that the RGONS-based material exhibits better electrochemical activity in sensing ascorbic acid than GO. The simple method provides a new efficient route for the synthesis of water-soluble RGONS on a large scale and novel composites. - Highlights: • We report a new environment-friendly reductant for the reduction of graphene oxide. • The reduction process needn't use other stabilizer except for using reductant. • The reduced graphene oxide nanosheet (RGONS) aqueous dispersion is stable. • The RGONS shows a high electrochemical activity in sensing ascorbic acid

  6. Reduction reactions of water soluble cyano-cobalt(III)-porphyrins: Metal versus ligand centered processes

    International Nuclear Information System (INIS)

    Mosseri, S.; Neta, P.; Harriman, A.; Hambright, P.

    1990-01-01

    Reduction reactions of dicyano-cobalt(III)-porphyrins [potential in vivo cyanide scavenger drugs] were studied by radiolytic and electrochemical methods using the water soluble tetrakis(4-sulfonatophenyl)porphyrin (TPPS) and tetrakis(N-methyl-4-pyridyl)porphyrin (TMPyP). For [(CN)2CoIIITPPS]-, reduction occurs stepwise to the CoII, CoI, and finally to the phlorin anion. This behavior is similar to that of the cobalt porphyrins in the absence of cyanide, except that the cyanide ligand shifts the reduction potentials to much more negative values. On the other hand, under radiolytic conditions, [(CN)2CoIIITMPyP]- is reduced on the porphyrin macrocycle by one electron to give the CoIII pi-radical anion, which disproportionates into the initial complex and the two-electron ring reduced CoIII phlorin. The radical anion is also formed by intramolecular electron transfer subsequent to the reaction of CoIITMPyP and cyanide. The results are compared with the chemistry of Vitamin B-12

  7. Model reduction for dynamic real-time optimization of chemical processes

    NARCIS (Netherlands)

    Van den Berg, J.

    2005-01-01

    The value of models in process industries becomes apparent in practice and literature where numerous successful applications are reported. Process models are being used for optimal plant design, simulation studies, for off-line and online process optimization. For online optimization applications

  8. Education and Training in Madagascar: Toward a Policy Agenda for Economic Growth and Poverty Reduction. A World Bank Country Study.

    Science.gov (United States)

    World Bank, Washington, DC.

    Madagascar is a poor, primarily rural country in which three-quarters of the population has subsisted below the poverty line for at least two decades. In view of the important role of education in the government's poverty reduction agenda, this report documents the current status of educational development in Madagascar and the key constraints on…

  9. IMPLEMENTING INNOVATIVE TECHNOLOGIES OF FUTURE SPECIALISTS’ PERSONAL AND PROFESSIONAL DEVELOPMENT IN THE TRAINING PROCESS

    Directory of Open Access Journals (Sweden)

    Halyna Kovalchuk

    2017-04-01

    Full Text Available The article deals with the problem of implementing innovative technologies of future specialists’ personal and professional development in the training process. The necessity of developing professional and personality-centered education is disclosed in National Doctrine of Education Development. The analysis of studied issue proves that it has various components and manifests that are revealed in the scientists’ works (I. Bekh, A. Heilyk, H. Zborovskyi, T. Parson, V. Bezpalko, V. Bykov, S, Ziazun and others. The aim of the article is to highlight the methodological and methodical approaches to future specialists’ personal and professional development by means of innovative teaching technologies. The article discloses some aspects of implementing technologies of profession-oriented, competence and personality-oriented training of future specialists in higher educational establishments. The special attention is paid to their personal and professional development by means of innovative teaching technologies. The personal dimension is considered to be a leading factor of achieving the main aim of humanistic school – personal self-realization. The role of autonomic learning for achieving didactic goals and future specialists’ self-designing at universities is identified. The methodological approaches (anthropocentric and sociocentric, action-praxeological, axiological, acmeological, productive, integrative, interactive, narrative, which promote implementing professional-oriented, competence and personality-centered technologies of future specialists’ training, are characterized. The conclusion is drawn that educational technologies are the main tools for supporting training quality of future specialists in the field of economics and business; forming their professional competences and professionally significant personal qualities that are the components of humanitarian principles of community development; providing quality of life at the

  10. No Evidence for Improved Associative Memory Performance Following Process-Based Associative Memory Training in Older Adults.

    Science.gov (United States)

    Bellander, Martin; Eschen, Anne; Lövdén, Martin; Martin, Mike; Bäckman, Lars; Brehmer, Yvonne

    2016-01-01

    Studies attempting to improve episodic memory performance with strategy instructions and training have had limited success in older adults: their training gains are limited in comparison to those of younger adults and do not generalize to untrained tasks and contexts. This limited success has been partly attributed to age-related impairments in associative binding of information into coherent episodes. We therefore investigated potential training and transfer effects of process-based associative memory training (i.e., repeated practice). Thirty-nine older adults ( M age = 68.8) underwent 6 weeks of either adaptive associative memory training or item recognition training. Both groups improved performance in item memory, spatial memory (object-context binding) and reasoning. A disproportionate effect of associative memory training was only observed for item memory, whereas no training-related performance changes were observed for associative memory. Self-reported strategies showed no signs of spontaneous development of memory-enhancing associative memory strategies. Hence, the results do not support the hypothesis that process-based associative memory training leads to higher associative memory performance in older adults.

  11. Hypnosis or cognitive behavioral training for the reduction of pain and nausea during cancer treatment: a controlled clinical trial.

    Science.gov (United States)

    Syrjala, K L; Cummings, C; Donaldson, G W

    1992-02-01

    Few controlled clinical trials have tested the efficacy of psychological techniques for reducing cancer pain or post-chemotherapy nausea and emesis. In this study, 67 bone marrow transplant patients with hematological malignancies were randomly assigned to one of four groups prior to beginning transplantation conditioning: (1) hypnosis training (HYP); (2) cognitive behavioral coping skills training (CB); (3) therapist contact control (TC); or (4) treatment as usual (TAU; no treatment control). Patients completed measures of physical functioning (Sickness Impact Profile; SIP) and psychological functioning (Brief Symptom Inventory; BSI), which were used as covariates in the analyses. Biodemographic variables included gender, age and a risk variable based on diagnosis and number of remissions or relapses. Patients in the HYP, CB and TC groups met with a clinical psychologist for two pre-transplant training sessions and ten in-hospital "booster" sessions during the course of transplantation. Forty-five patients completed the study and provided all covariate data, and 80% of the time series outcome data. Analyses of the principal study variables indicated that hypnosis was effective in reducing reported oral pain for patients undergoing marrow transplantation. Risk, SIP, and BSI pre-transplant were found to be effective predictors of inpatient physical symptoms. Nausea, emesis and opioid use did not differ significantly between the treatment groups. The cognitive behavioral intervention, as applied in this study, was not effective in reducing the symptoms measured.

  12. Conscious motor processing and movement self-consciousness: two dimensions of personality that influence laparoscopic training.

    Science.gov (United States)

    Malhotra, Neha; Poolton, Jamie M; Wilson, Mark R; Fan, Joe K M; Masters, Rich S W

    2014-01-01

    Identifying personality factors that account for individual differences in surgical training and performance has practical implications for surgical education. Movement-specific reinvestment is a potentially relevant personality factor that has a moderating effect on laparoscopic performance under time pressure. Movement-specific reinvestment has 2 dimensions, which represent an individual's propensity to consciously control movements (conscious motor processing) or to consciously monitor their 'style' of movement (movement self-consciousness). This study aimed at investigating the moderating effects of the 2 dimensions of movement-specific reinvestment in the learning and updating (cross-handed technique) of laparoscopic skills. Medical students completed the Movement-Specific Reinvestment Scale, a psychometric assessment tool that evaluates the conscious motor processing and movement self-consciousness dimensions of movement-specific reinvestment. They were then trained to a criterion level of proficiency on a fundamental laparoscopic skills task and were tested on a novel cross-handed technique. Completion times were recorded for early-learning, late-learning, and cross-handed trials. Propensity for movement self-consciousness but not conscious motor processing was a significant predictor of task completion times both early (p = 0.036) and late (p = 0.002) in learning, but completion times during the cross-handed trials were predicted by the propensity for conscious motor processing (p = 0.04) rather than movement self-consciousness (p = 0.21). Higher propensity for movement self-consciousness is associated with slower performance times on novel and well-practiced laparoscopic tasks. For complex surgical techniques, however, conscious motor processing plays a more influential role in performance than movement self-consciousness. The findings imply that these 2 dimensions of movement-specific reinvestment have a differential influence in the learning and updating

  13. Recurrent intergrowths in the topotactic reduction process of LaBaCuCoO5.2.

    Science.gov (United States)

    Ruiz-González, Luisa; Boulahya, Khalid; Parras, Marina; Alonso, José; González-Calbet, José M

    2002-12-16

    A new perovskite-related oxide with the LaBaCuCoO5.2 composition has been stabilised. Its structure can be described as formed by the recurrent intergrowth of two alternating blocks of YBaCuFeO5 (2ac, i.e., two-fold perovskite superlattice) and YBa2Fe3O8 (3ac) structural types. From the starting material LaBaCuCoO5.2-delta (delta = 0), the rigorous control of the oxygen content has allowed the stabilisation of three new five fold perovskite-related superstructures with the compositions delta = 0.4, 0.8 and 1.1, which can also be described as recurrent intergrowths of two blocks showing 2ac and 3ac periodicity. The reduction process takes place through the 3ac periodic blocks, when 0 topotactic reaction, since their basic structure is kept through the reduction process.

  14. Reduction of Aspergillus spp. and aflatoxins in peanut sauce processing by oil-less frying of chilli powder and retort processing.

    Science.gov (United States)

    Farawahida, A H; Jinap, S; Nor-Khaizura, M A R; Samsudin, N I P

    2017-12-01

    Among the many roles played by small and medium enterprises (SMEs) in the food industry is the production of heritage foods such as peanut sauce. Unfortunately, the safety of peanut sauce is not always assured as the processing line is not controlled. Peanut sauce is usually made of peanuts and chilli, and these commodities are normally contaminated with Aspergillus spp. and aflatoxins (AFs). Hence, the objective of this study was to evaluate the practices related to reduction of AF hazard and the effect of interventions in peanut sauce processing. Peanut samples were collected from each step of peanut sauce processing from a small peanut sauce company according to four designs: (1) control; (2) oil-less frying of chilli powder; (3) addition of retort processing; and (4) combination of oil-less frying of chilli powder and retort processing. Oil-less frying of chilli powder (Design 2) reduced total AFs by 33-41%, retort processing (Design 3) reduced total AFs by 49%, while combination of these two thermal processes (Design 4) significantly reduced total AFs, by 57%. The present work demonstrated that Design 4 yielded the highest reduction of total AFs and is therefore recommended to be employed by SME companies.

  15. Mindfulness Training Alters Emotional Memory Recall Compared to Active Controls: Support for an Emotional Information Processing Model of Mindfulness

    OpenAIRE

    Roberts-Wolfe, Douglas; Sacchet, Matthew D.; Hastings, Elizabeth; Roth, Harold; Britton, Willoughby

    2012-01-01

    Objectives: While mindfulness-based interventions have received widespread application in both clinical and non-clinical populations, the mechanism by which mindfulness meditation improves well-being remains elusive. One possibility is that mindfulness training alters the processing of emotional information, similar to prevailing cognitive models of depression and anxiety. The aim of this study was to investigate the effects of mindfulness training on emotional information processing (i.e., m...

  16. STUDENTS’MOTIVATION IN THE TRAINING PROCESS AND ITS RELATIONTO THE REWARDS FROM SUPERIORS FOR GETTING BETTER PERFORMANCE

    OpenAIRE

    Elitsa Stoyanova Petrova

    2017-01-01

    This article presents a research on the influence of positive reinforcements on the motivation of civilian and military students in the training process and its relation with therewards given from the superiors for getting better performanceat the university. The study is conducted in a real educational environment. The subject of the study is the positive reinforcements and the end results in the training process. The object of the study is cadets in the last year of their education in the M...

  17. An Examination of Mediators of the Transfer of Cognitive Speed of Processing Training to Everyday Functional Performance

    OpenAIRE

    Edwards, Jerri D.; Ruva, Christine L.; O’Brien, Jennifer L.; Haley, Christine B.; Lister, Jennifer J.

    2012-01-01

    The purpose of these analyses was to examine mediators of the transfer of cognitive speed of processing training to improved everyday functional performance (Edwards, Wadley, Vance, Roenker, & Ball, 2005). Cognitive speed of processing and visual attention (as measured by the Useful Field of View Test; UFOV) were examined as mediators of training transfer. Secondary data analyses were conducted from the Staying Keen in Later Life (SKILL) study, a randomized cohort study including 126 communit...

  18. Brain training game boosts executive functions, working memory and processing speed in the young adults: a randomized controlled trial.

    Science.gov (United States)

    Nouchi, Rui; Taki, Yasuyuki; Takeuchi, Hikaru; Hashizume, Hiroshi; Nozawa, Takayuki; Kambara, Toshimune; Sekiguchi, Atsushi; Miyauchi, Carlos Makoto; Kotozaki, Yuka; Nouchi, Haruka; Kawashima, Ryuta

    2013-01-01

    Do brain training games work? The beneficial effects of brain training games are expected to transfer to other cognitive functions. Yet in all honesty, beneficial transfer effects of the commercial brain training games in young adults have little scientific basis. Here we investigated the impact of the brain training game (Brain Age) on a wide range of cognitive functions in young adults. We conducted a double-blind (de facto masking) randomized controlled trial using a popular brain training game (Brain Age) and a popular puzzle game (Tetris). Thirty-two volunteers were recruited through an advertisement in the local newspaper and randomly assigned to either of two game groups (Brain Age, Tetris). Participants in both the Brain Age and the Tetris groups played their game for about 15 minutes per day, at least 5 days per week, for 4 weeks. Measures of the cognitive functions were conducted before and after training. Measures of the cognitive functions fell into eight categories (fluid intelligence, executive function, working memory, short-term memory, attention, processing speed, visual ability, and reading ability). Our results showed that commercial brain training game improves executive functions, working memory, and processing speed in young adults. Moreover, the popular puzzle game can engender improvement attention and visuo-spatial ability compared to playing the brain training game. The present study showed the scientific evidence which the brain training game had the beneficial effects on cognitive functions (executive functions, working memory and processing speed) in the healthy young adults. Our results do not indicate that everyone should play brain training games. However, the commercial brain training game might be a simple and convenient means to improve some cognitive functions. We believe that our findings are highly relevant to applications in educational and clinical fields. UMIN Clinical Trial Registry 000005618.

  19. Brain training game boosts executive functions, working memory and processing speed in the young adults: a randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Rui Nouchi

    Full Text Available BACKGROUND: Do brain training games work? The beneficial effects of brain training games are expected to transfer to other cognitive functions. Yet in all honesty, beneficial transfer effects of the commercial brain training games in young adults have little scientific basis. Here we investigated the impact of the brain training game (Brain Age on a wide range of cognitive functions in young adults. METHODS: We conducted a double-blind (de facto masking randomized controlled trial using a popular brain training game (Brain Age and a popular puzzle game (Tetris. Thirty-two volunteers were recruited through an advertisement in the local newspaper and randomly assigned to either of two game groups (Brain Age, Tetris. Participants in both the Brain Age and the Tetris groups played their game for about 15 minutes per day, at least 5 days per week, for 4 weeks. Measures of the cognitive functions were conducted before and after training. Measures of the cognitive functions fell into eight categories (fluid intelligence, executive function, working memory, short-term memory, attention, processing speed, visual ability, and reading ability. RESULTS AND DISCUSSION: Our results showed that commercial brain training game improves executive functions, working memory, and processing speed in young adults. Moreover, the popular puzzle game can engender improvement attention and visuo-spatial ability compared to playing the brain training game. The present study showed the scientific evidence which the brain training game had the beneficial effects on cognitive functions (executive functions, working memory and processing speed in the healthy young adults. CONCLUSIONS: Our results do not indicate that everyone should play brain training games. However, the commercial brain training game might be a simple and convenient means to improve some cognitive functions. We believe that our findings are highly relevant to applications in educational and clinical fields

  20. A pilot study investigating changes in neural processing after mindfulness training in elite athletes.

    Science.gov (United States)

    Haase, Lori; May, April C; Falahpour, Maryam; Isakovic, Sara; Simmons, Alan N; Hickman, Steven D; Liu, Thomas T; Paulus, Martin P

    2015-01-01

    The ability to pay close attention to the present moment can be a crucial factor for performing well in a competitive situation. Training mindfulness is one approach to potentially improve elite athletes' ability to focus their attention on the present moment. However, virtually nothing is known about whether these types of interventions alter neural systems that are important for optimal performance. This pilot study examined whether an intervention aimed at improving mindfulness [Mindful Performance Enhancement, Awareness and Knowledge (mPEAK)] changes neural activation patterns during an interoceptive challenge. Participants completed a task involving anticipation and experience of loaded breathing during functional magnetic resonance imaging recording. There were five main results following mPEAK training: (1) elite athletes self-reported higher levels of interoceptive awareness and mindfulness and lower levels of alexithymia; (2) greater insula and anterior cingulate cortex (ACC) activation during anticipation and post-breathing load conditions; (3) increased ACC activation during the anticipation condition was associated with increased scores on the describing subscale of the Five Facet Mindfulness Questionnaire; (4) increased insula activation during the post-load condition was associated with decreases in the Toronto Alexithymia Scale identifying feelings subscale; (5) decreased resting state functional connectivity between the PCC and the right medial frontal cortex and the ACC. Taken together, this pilot study suggests that mPEAK training may lead to increased attention to bodily signals and greater neural processing during the anticipation and recovery from interoceptive perturbations. This association between attention to and processing of interoceptive afferents may result in greater adaptation during stressful situations in elite athletes.