A Workload-Adaptive and Reconfigurable Bus Architecture for Multicore Processors

Directory of Open Access Journals (Sweden)

Shoaib Akram

2010-01-01

Full Text Available Interconnection networks for multicore processors are traditionally designed to serve a diversity of workloads. However, different workloads or even different execution phases of the same workload may benefit from different interconnect configurations. In this paper, we first motivate the need for workload-adaptive interconnection networks. Subsequently, we describe an interconnection network framework based on reconfigurable switches for use in medium-scale (up to 32 cores shared memory multicore processors. Our cost-effective reconfigurable interconnection network is implemented on a traditional shared bus interconnect with snoopy-based coherence, and it enables improved multicore performance. The proposed interconnect architecture distributes the cores of the processor into clusters with reconfigurable logic between clusters to support workload-adaptive policies for inter-cluster communication. Our interconnection scheme is complemented by interconnect-aware scheduling and additional interconnect optimizations which help boost the performance of multiprogramming and multithreaded workloads. We provide experimental results that show that the overall throughput of multiprogramming workloads (consisting of two and four programs can be improved by up to 60% with our configurable bus architecture. Similar gains can be achieved also for multithreaded applications as shown by further experiments. Finally, we present the performance sensitivity of the proposed interconnect architecture on shared memory bandwidth availability.

Sequential analysis in neonatal research-systematic review.

Science.gov (United States)

Lava, Sebastiano A G; Elie, Valéry; Ha, Phuong Thi Viet; Jacqz-Aigrain, Evelyne

2018-05-01

As more new drugs are discovered, traditional designs come at their limits. Ten years after the adoption of the European Paediatric Regulation, we performed a systematic review on the US National Library of Medicine and Excerpta Medica database of sequential trials involving newborns. Out of 326 identified scientific reports, 21 trials were included. They enrolled 2832 patients, of whom 2099 were analyzed: the median number of neonates included per trial was 48 (IQR 22-87), median gestational age was 28.7 (IQR 27.9-30.9) weeks. Eighteen trials used sequential techniques to determine sample size, while 3 used continual reassessment methods for dose-finding. In 16 studies reporting sufficient data, the sequential design allowed to non-significantly reduce the number of enrolled neonates by a median of 24 (31%) patients (IQR - 4.75 to 136.5, p = 0.0674) with respect to a traditional trial. When the number of neonates finally included in the analysis was considered, the difference became significant: 35 (57%) patients (IQR 10 to 136.5, p = 0.0033). Sequential trial designs have not been frequently used in Neonatology. They might potentially be able to reduce the number of patients in drug trials, although this is not always the case. What is known: • In evaluating rare diseases in fragile populations, traditional designs come at their limits. About 20% of pediatric trials are discontinued, mainly because of recruitment problems. What is new: • Sequential trials involving newborns were infrequently used and only a few (n = 21) are available for analysis. • The sequential design allowed to non-significantly reduce the number of enrolled neonates by a median of 24 (31%) patients (IQR - 4.75 to 136.5, p = 0.0674).

Trial Sequential Analysis in systematic reviews with meta-analysis

Directory of Open Access Journals (Sweden)

Jørn Wetterslev

2017-03-01

Full Text Available Abstract Background Most meta-analyses in systematic reviews, including Cochrane ones, do not have sufficient statistical power to detect or refute even large intervention effects. This is why a meta-analysis ought to be regarded as an interim analysis on its way towards a required information size. The results of the meta-analyses should relate the total number of randomised participants to the estimated required meta-analytic information size accounting for statistical diversity. When the number of participants and the corresponding number of trials in a meta-analysis are insufficient, the use of the traditional 95% confidence interval or the 5% statistical significance threshold will lead to too many false positive conclusions (type I errors and too many false negative conclusions (type II errors. Methods We developed a methodology for interpreting meta-analysis results, using generally accepted, valid evidence on how to adjust thresholds for significance in randomised clinical trials when the required sample size has not been reached. Results The Lan-DeMets trial sequential monitoring boundaries in Trial Sequential Analysis offer adjusted confidence intervals and restricted thresholds for statistical significance when the diversity-adjusted required information size and the corresponding number of required trials for the meta-analysis have not been reached. Trial Sequential Analysis provides a frequentistic approach to control both type I and type II errors. We define the required information size and the corresponding number of required trials in a meta-analysis and the diversity (D2 measure of heterogeneity. We explain the reasons for using Trial Sequential Analysis of meta-analysis when the actual information size fails to reach the required information size. We present examples drawn from traditional meta-analyses using unadjusted naïve 95% confidence intervals and 5% thresholds for statistical significance. Spurious conclusions in

Real-time autocorrelator for fluorescence correlation spectroscopy based on graphical-processor-unit architecture: method, implementation, and comparative studies

Science.gov (United States)

Laracuente, Nicholas; Grossman, Carl

2013-03-01

We developed an algorithm and software to calculate autocorrelation functions from real-time photon-counting data using the fast, parallel capabilities of graphical processor units (GPUs). Recent developments in hardware and software have allowed for general purpose computing with inexpensive GPU hardware. These devices are more suited for emulating hardware autocorrelators than traditional CPU-based software applications by emphasizing parallel throughput over sequential speed. Incoming data are binned in a standard multi-tau scheme with configurable points-per-bin size and are mapped into a GPU memory pattern to reduce time-expensive memory access. Applications include dynamic light scattering (DLS) and fluorescence correlation spectroscopy (FCS) experiments. We ran the software on a 64-core graphics pci card in a 3.2 GHz Intel i5 CPU based computer running Linux. FCS measurements were made on Alexa-546 and Texas Red dyes in a standard buffer (PBS). Software correlations were compared to hardware correlator measurements on the same signals. Supported by HHMI and Swarthmore College

From sequential to parallel programming with patterns

CERN Document Server

CERN. Geneva

2018-01-01

To increase in both performance and efficiency, our programming models need to adapt to better exploit modern processors. The classic idioms and patterns for programming such as loops, branches or recursion are the pillars of almost every code and are well known among all programmers. These patterns all have in common that they are sequential in nature. Embracing parallel programming patterns, which allow us to program for multi- and many-core hardware in a natural way, greatly simplifies the task of designing a program that scales and performs on modern hardware, independently of the used programming language, and in a generic way.

Array processor architecture

Science.gov (United States)

Barnes, George H. (Inventor); Lundstrom, Stephen F. (Inventor); Shafer, Philip E. (Inventor)

1983-01-01

A high speed parallel array data processing architecture fashioned under a computational envelope approach includes a data base memory for secondary storage of programs and data, and a plurality of memory modules interconnected to a plurality of processing modules by a connection network of the Omega gender. Programs and data are fed from the data base memory to the plurality of memory modules and from hence the programs are fed through the connection network to the array of processors (one copy of each program for each processor). Execution of the programs occur with the processors operating normally quite independently of each other in a multiprocessing fashion. For data dependent operations and other suitable operations, all processors are instructed to finish one given task or program branch before all are instructed to proceed in parallel processing fashion on the next instruction. Even when functioning in the parallel processing mode however, the processors are not locked-step but execute their own copy of the program individually unless or until another overall processor array synchronization instruction is issued.

Green Secure Processors: Towards Power-Efficient Secure Processor Design

Science.gov (United States)

Chhabra, Siddhartha; Solihin, Yan

With the increasing wealth of digital information stored on computer systems today, security issues have become increasingly important. In addition to attacks targeting the software stack of a system, hardware attacks have become equally likely. Researchers have proposed Secure Processor Architectures which utilize hardware mechanisms for memory encryption and integrity verification to protect the confidentiality and integrity of data and computation, even from sophisticated hardware attacks. While there have been many works addressing performance and other system level issues in secure processor design, power issues have largely been ignored. In this paper, we first analyze the sources of power (energy) increase in different secure processor architectures. We then present a power analysis of various secure processor architectures in terms of their increase in power consumption over a base system with no protection and then provide recommendations for designs that offer the best balance between performance and power without compromising security. We extend our study to the embedded domain as well. We also outline the design of a novel hybrid cryptographic engine that can be used to minimize the power consumption for a secure processor. We believe that if secure processors are to be adopted in future systems (general purpose or embedded), it is critically important that power issues are considered in addition to performance and other system level issues. To the best of our knowledge, this is the first work to examine the power implications of providing hardware mechanisms for security.

Probabilistic programmable quantum processors

International Nuclear Information System (INIS)

Buzek, V.; Ziman, M.; Hillery, M.

2004-01-01

We analyze how to improve performance of probabilistic programmable quantum processors. We show how the probability of success of the probabilistic processor can be enhanced by using the processor in loops. In addition, we show that an arbitrary SU(2) transformations of qubits can be encoded in program state of a universal programmable probabilistic quantum processor. The probability of success of this processor can be enhanced by a systematic correction of errors via conditional loops. Finally, we show that all our results can be generalized also for qudits. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

Comparison of Processor Performance of SPECint2006 Benchmarks of some Intel Xeon Processors

OpenAIRE

Abdul Kareem PARCHUR; Ram Asaray SINGH

2012-01-01

High performance is a critical requirement to all microprocessors manufacturers. The present paper describes the comparison of performance in two main Intel Xeon series processors (Type A: Intel Xeon X5260, X5460, E5450 and L5320 and Type B: Intel Xeon X5140, 5130, 5120 and E5310). The microarchitecture of these processors is implemented using the basis of a new family of processors from Intel starting with the Pentium 4 processor. These processors can provide a performance boost for many ke...

The LASS hardware processor

International Nuclear Information System (INIS)

Kunz, P.F.

1976-01-01

The problems of data analysis with hardware processors are reviewed and a description is given of a programmable processor. This processor, the 168/E, has been designed for use in the LASS multi-processor system; it has an execution speed comparable to the IBM 370/168 and uses the subset of IBM 370 instructions appropriate to the LASS analysis task. (Auth.)

Research on parallel algorithm for sequential pattern mining

Science.gov (United States)

Zhou, Lijuan; Qin, Bai; Wang, Yu; Hao, Zhongxiao

2008-03-01

Sequential pattern mining is the mining of frequent sequences related to time or other orders from the sequence database. Its initial motivation is to discover the laws of customer purchasing in a time section by finding the frequent sequences. In recent years, sequential pattern mining has become an important direction of data mining, and its application field has not been confined to the business database and has extended to new data sources such as Web and advanced science fields such as DNA analysis. The data of sequential pattern mining has characteristics as follows: mass data amount and distributed storage. Most existing sequential pattern mining algorithms haven't considered the above-mentioned characteristics synthetically. According to the traits mentioned above and combining the parallel theory, this paper puts forward a new distributed parallel algorithm SPP(Sequential Pattern Parallel). The algorithm abides by the principal of pattern reduction and utilizes the divide-and-conquer strategy for parallelization. The first parallel task is to construct frequent item sets applying frequent concept and search space partition theory and the second task is to structure frequent sequences using the depth-first search method at each processor. The algorithm only needs to access the database twice and doesn't generate the candidated sequences, which abates the access time and improves the mining efficiency. Based on the random data generation procedure and different information structure designed, this paper simulated the SPP algorithm in a concrete parallel environment and implemented the AprioriAll algorithm. The experiments demonstrate that compared with AprioriAll, the SPP algorithm had excellent speedup factor and efficiency.

Synthetic Aperture Sequential Beamforming implemented on multi-core platforms

DEFF Research Database (Denmark)

Kjeldsen, Thomas; Lassen, Lee; Hemmsen, Martin Christian

2014-01-01

This paper compares several computational ap- proaches to Synthetic Aperture Sequential Beamforming (SASB) targeting consumer level parallel processors such as multi-core CPUs and GPUs. The proposed implementations demonstrate that ultrasound imaging using SASB can be executed in real- time with ...... per second) on an Intel Core i7 2600 CPU with an AMD HD7850 and a NVIDIA GTX680 GPU. The fastest CPU and GPU implementations use 14% and 1.3% of the real-time budget of 62 ms/frame, respectively. The maximum achieved processing rate is 1265 frames/s....

A Sequential Multiplicative Extended Kalman Filter for Attitude Estimation Using Vector Observations

Science.gov (United States)

Qin, Fangjun; Jiang, Sai; Zha, Feng

2018-01-01

In this paper, a sequential multiplicative extended Kalman filter (SMEKF) is proposed for attitude estimation using vector observations. In the proposed SMEKF, each of the vector observations is processed sequentially to update the attitude, which can make the measurement model linearization more accurate for the next vector observation. This is the main difference to Murrell’s variation of the MEKF, which does not update the attitude estimate during the sequential procedure. Meanwhile, the covariance is updated after all the vector observations have been processed, which is used to account for the special characteristics of the reset operation necessary for the attitude update. This is the main difference to the traditional sequential EKF, which updates the state covariance at each step of the sequential procedure. The numerical simulation study demonstrates that the proposed SMEKF has more consistent and accurate performance in a wide range of initial estimate errors compared to the MEKF and its traditional sequential forms. PMID:29751538

A Sequential Multiplicative Extended Kalman Filter for Attitude Estimation Using Vector Observations

Directory of Open Access Journals (Sweden)

Fangjun Qin

2018-05-01

Full Text Available In this paper, a sequential multiplicative extended Kalman filter (SMEKF is proposed for attitude estimation using vector observations. In the proposed SMEKF, each of the vector observations is processed sequentially to update the attitude, which can make the measurement model linearization more accurate for the next vector observation. This is the main difference to Murrell’s variation of the MEKF, which does not update the attitude estimate during the sequential procedure. Meanwhile, the covariance is updated after all the vector observations have been processed, which is used to account for the special characteristics of the reset operation necessary for the attitude update. This is the main difference to the traditional sequential EKF, which updates the state covariance at each step of the sequential procedure. The numerical simulation study demonstrates that the proposed SMEKF has more consistent and accurate performance in a wide range of initial estimate errors compared to the MEKF and its traditional sequential forms.

Comparison of Processor Performance of SPECint2006 Benchmarks of some Intel Xeon Processors

Directory of Open Access Journals (Sweden)

Abdul Kareem PARCHUR

2012-08-01

Full Text Available High performance is a critical requirement to all microprocessors manufacturers. The present paper describes the comparison of performance in two main Intel Xeon series processors (Type A: Intel Xeon X5260, X5460, E5450 and L5320 and Type B: Intel Xeon X5140, 5130, 5120 and E5310. The microarchitecture of these processors is implemented using the basis of a new family of processors from Intel starting with the Pentium 4 processor. These processors can provide a performance boost for many key application areas in modern generation. The scaling of performance in two major series of Intel Xeon processors (Type A: Intel Xeon X5260, X5460, E5450 and L5320 and Type B: Intel Xeon X5140, 5130, 5120 and E5310 has been analyzed using the performance numbers of 12 CPU2006 integer benchmarks, performance numbers that exhibit significant differences in performance. The results and analysis can be used by performance engineers, scientists and developers to better understand the performance scaling in modern generation processors.

Simulation of a parallel processor on a serial processor: The neutron diffusion equation

International Nuclear Information System (INIS)

Honeck, H.C.

1981-01-01

Parallel processors could provide the nuclear industry with very high computing power at a very moderate cost. Will we be able to make effective use of this power. This paper explores the use of a very simple parallel processor for solving the neutron diffusion equation to predict power distributions in a nuclear reactor. We first describe a simple parallel processor and estimate its theoretical performance based on the current hardware technology. Next, we show how the parallel processor could be used to solve the neutron diffusion equation. We then present the results of some simulations of a parallel processor run on a serial processor and measure some of the expected inefficiencies. Finally we extrapolate the results to estimate how actual design codes would perform. We find that the standard numerical methods for solving the neutron diffusion equation are still applicable when used on a parallel processor. However, some simple modifications to these methods will be necessary if we are to achieve the full power of these new computers. (orig.) [de

System Level Design of Reconfigurable Server Farms Using Elliptic Curve Cryptography Processor Engines

Directory of Open Access Journals (Sweden)

Sangook Moon

2014-01-01

Full Text Available As today’s hardware architecture becomes more and more complicated, it is getting harder to modify or improve the microarchitecture of a design in register transfer level (RTL. Consequently, traditional methods we have used to develop a design are not capable of coping with complex designs. In this paper, we suggest a way of designing complex digital logic circuits with a soft and advanced type of SystemVerilog at an electronic system level. We apply the concept of design-and-reuse with a high level of abstraction to implement elliptic curve crypto-processor server farms. With the concept of the superior level of abstraction to the RTL used with the traditional HDL design, we successfully achieved the soft implementation of the crypto-processor server farms as well as robust test bench code with trivial effort in the same simulation environment. Otherwise, it could have required error-prone Verilog simulations for the hardware IPs and other time-consuming jobs such as C/SystemC verification for the software, sacrificing more time and effort. In the design of the elliptic curve cryptography processor engine, we propose a 3X faster GF(2m serial multiplication architecture.

Fundamental physics issues of multilevel logic in developing a parallel processor.

Science.gov (United States)

Bandyopadhyay, Anirban; Miki, Kazushi

2007-06-01

In the last century, On and Off physical switches, were equated with two decisions 0 and 1 to express every information in terms of binary digits and physically realize it in terms of switches connected in a circuit. Apart from memory-density increase significantly, more possible choices in particular space enables pattern-logic a reality, and manipulation of pattern would allow controlling logic, generating a new kind of processor. Neumann's computer is based on sequential logic, processing bits one by one. But as pattern-logic is generated on a surface, viewing whole pattern at a time is a truly parallel processing. Following Neumann's and Shannons fundamental thermodynamical approaches we have built compatible model based on series of single molecule based multibit logic systems of 4-12 bits in an UHV-STM. On their monolayer multilevel communication and pattern formation is experimentally verified. Furthermore, the developed intelligent monolayer is trained by Artificial Neural Network. Therefore fundamental weak interactions for the building of truly parallel processor are explored here physically and theoretically.

Functional unit for a processor

NARCIS (Netherlands)

Rohani, A.; Kerkhoff, Hans G.

2013-01-01

The invention relates to a functional unit for a processor, such as a Very Large Instruction Word Processor. The invention further relates to a processor comprising at least one such functional unit. The invention further relates to a functional unit and processor capable of mitigating the effect of

Adaptive signal processor

Energy Technology Data Exchange (ETDEWEB)

Walz, H.V.

1980-07-01

An experimental, general purpose adaptive signal processor system has been developed, utilizing a quantized (clipped) version of the Widrow-Hoff least-mean-square adaptive algorithm developed by Moschner. The system accommodates 64 adaptive weight channels with 8-bit resolution for each weight. Internal weight update arithmetic is performed with 16-bit resolution, and the system error signal is measured with 12-bit resolution. An adapt cycle of adjusting all 64 weight channels is accomplished in 8 ..mu..sec. Hardware of the signal processor utilizes primarily Schottky-TTL type integrated circuits. A prototype system with 24 weight channels has been constructed and tested. This report presents details of the system design and describes basic experiments performed with the prototype signal processor. Finally some system configurations and applications for this adaptive signal processor are discussed.

Adaptive signal processor

International Nuclear Information System (INIS)

Walz, H.V.

1980-07-01

An experimental, general purpose adaptive signal processor system has been developed, utilizing a quantized (clipped) version of the Widrow-Hoff least-mean-square adaptive algorithm developed by Moschner. The system accommodates 64 adaptive weight channels with 8-bit resolution for each weight. Internal weight update arithmetic is performed with 16-bit resolution, and the system error signal is measured with 12-bit resolution. An adapt cycle of adjusting all 64 weight channels is accomplished in 8 μsec. Hardware of the signal processor utilizes primarily Schottky-TTL type integrated circuits. A prototype system with 24 weight channels has been constructed and tested. This report presents details of the system design and describes basic experiments performed with the prototype signal processor. Finally some system configurations and applications for this adaptive signal processor are discussed

Hardware Realization of an FPGA Processor – Operating System Call Offload and Experiences

DEFF Research Database (Denmark)

Hindborg, Andreas Erik; Schleuniger, Pascal; Jensen, Nicklas Bo

2014-01-01

Field-programmable gate arrays, FPGAs, are attractive implementation platforms for low-volume signal and image processing applications. The structure of FPGAs allows for an efficient implementation of parallel algorithms. Sequential algorithms, on the other hand, often perform better...... core that can be integrated in many signal and data processing platforms on FPGAs. We also show how we allow the processor to use operating system services. For a set of SPLASH-2 and SPEC CPU2006 benchmarks we show a speedup of up to 64% over a similar Xilinx MicroBlaze implementation while using 27...

Multithreading in vector processors

Science.gov (United States)

Evangelinos, Constantinos; Kim, Changhoan; Nair, Ravi

2018-01-16

In one embodiment, a system includes a processor having a vector processing mode and a multithreading mode. The processor is configured to operate on one thread per cycle in the multithreading mode. The processor includes a program counter register having a plurality of program counters, and the program counter register is vectorized. Each program counter in the program counter register represents a distinct corresponding thread of a plurality of threads. The processor is configured to execute the plurality of threads by activating the plurality of program counters in a round robin cycle.

Dual-core Itanium Processor

CERN Multimedia

2006-01-01

Intel’s first dual-core Itanium processor, code-named "Montecito" is a major release of Intel's Itanium 2 Processor Family, which implements the Intel Itanium architecture on a dual-core processor with two cores per die (integrated circuit). Itanium 2 is much more powerful than its predecessor. It has lower power consumption and thermal dissipation.

3081/E processor

International Nuclear Information System (INIS)

Kunz, P.F.; Gravina, M.; Oxoby, G.

1984-04-01

The 3081/E project was formed to prepare a much improved IBM mainframe emulator for the future. Its design is based on a large amount of experience in using the 168/E processor to increase available CPU power in both online and offline environments. The processor will be at least equal to the execution speed of a 370/168 and up to 1.5 times faster for heavy floating point code. A single processor will thus be at least four times more powerful than the VAX 11/780, and five processors on a system would equal at least the performance of the IBM 3081K. With its large memory space and simple but flexible high speed interface, the 3081/E is well suited for the online and offline needs of high energy physics in the future

Integrated fuel processor development

International Nuclear Information System (INIS)

Ahmed, S.; Pereira, C.; Lee, S. H. D.; Krumpelt, M.

2001-01-01

The Department of Energy's Office of Advanced Automotive Technologies has been supporting the development of fuel-flexible fuel processors at Argonne National Laboratory. These fuel processors will enable fuel cell vehicles to operate on fuels available through the existing infrastructure. The constraints of on-board space and weight require that these fuel processors be designed to be compact and lightweight, while meeting the performance targets for efficiency and gas quality needed for the fuel cell. This paper discusses the performance of a prototype fuel processor that has been designed and fabricated to operate with liquid fuels, such as gasoline, ethanol, methanol, etc. Rated for a capacity of 10 kWe (one-fifth of that needed for a car), the prototype fuel processor integrates the unit operations (vaporization, heat exchange, etc.) and processes (reforming, water-gas shift, preferential oxidation reactions, etc.) necessary to produce the hydrogen-rich gas (reformate) that will fuel the polymer electrolyte fuel cell stacks. The fuel processor work is being complemented by analytical and fundamental research. With the ultimate objective of meeting on-board fuel processor goals, these studies include: modeling fuel cell systems to identify design and operating features; evaluating alternative fuel processing options; and developing appropriate catalysts and materials. Issues and outstanding challenges that need to be overcome in order to develop practical, on-board devices are discussed

Implementation of 4-way Superscalar Hash MIPS Processor Using FPGA

Science.gov (United States)

Sahib Omran, Safaa; Fouad Jumma, Laith

2018-05-01

Due to the quick advancements in the personal communications systems and wireless communications, giving data security has turned into a more essential subject. This security idea turns into a more confounded subject when next-generation system requirements and constant calculation speed are considered in real-time. Hash functions are among the most essential cryptographic primitives and utilized as a part of the many fields of signature authentication and communication integrity. These functions are utilized to acquire a settled size unique fingerprint or hash value of an arbitrary length of message. In this paper, Secure Hash Algorithms (SHA) of types SHA-1, SHA-2 (SHA-224, SHA-256) and SHA-3 (BLAKE) are implemented on Field-Programmable Gate Array (FPGA) in a processor structure. The design is described and implemented using a hardware description language, namely VHSIC “Very High Speed Integrated Circuit” Hardware Description Language (VHDL). Since the logical operation of the hash types of (SHA-1, SHA-224, SHA-256 and SHA-3) are 32-bits, so a Superscalar Hash Microprocessor without Interlocked Pipelines (MIPS) processor are designed with only few instructions that were required in invoking the desired Hash algorithms, when the four types of hash algorithms executed sequentially using the designed processor, the total time required equal to approximately 342 us, with a throughput of 4.8 Mbps while the required to execute the same four hash algorithms using the designed four-way superscalar is reduced to 237 us with improved the throughput to 5.1 Mbps.

GPU: the biggest key processor for AI and parallel processing

Science.gov (United States)

Baji, Toru

2017-07-01

Two types of processors exist in the market. One is the conventional CPU and the other is Graphic Processor Unit (GPU). Typical CPU is composed of 1 to 8 cores while GPU has thousands of cores. CPU is good for sequential processing, while GPU is good to accelerate software with heavy parallel executions. GPU was initially dedicated for 3D graphics. However from 2006, when GPU started to apply general-purpose cores, it was noticed that this architecture can be used as a general purpose massive-parallel processor. NVIDIA developed a software framework Compute Unified Device Architecture (CUDA) that make it possible to easily program the GPU for these application. With CUDA, GPU started to be used in workstations and supercomputers widely. Recently two key technologies are highlighted in the industry. The Artificial Intelligence (AI) and Autonomous Driving Cars. AI requires a massive parallel operation to train many-layers of neural networks. With CPU alone, it was impossible to finish the training in a practical time. The latest multi-GPU system with P100 makes it possible to finish the training in a few hours. For the autonomous driving cars, TOPS class of performance is required to implement perception, localization, path planning processing and again SoC with integrated GPU will play a key role there. In this paper, the evolution of the GPU which is one of the biggest commercial devices requiring state-of-the-art fabrication technology will be introduced. Also overview of the GPU demanding key application like the ones described above will be introduced.

Introduction to programming multiple-processor computers

International Nuclear Information System (INIS)

Hicks, H.R.; Lynch, V.E.

1985-04-01

FORTRAN applications programs can be executed on multiprocessor computers in either a unitasking (traditional) or multitasking form. The latter allows a single job to use more than one processor simultaneously, with a consequent reduction in wall-clock time and, perhaps, the cost of the calculation. An introduction to programming in this environment is presented. The concepts of synchronization and data sharing using EVENTS and LOCKS are illustrated with examples. The strategy of strong synchronization and the use of synchronization templates are proposed. We emphasize that incorrect multitasking programs can produce irreproducible results, which makes debugging more difficult

XOP, a fast versatile processor, as a building block for parallel processing in high energy physics experiments

International Nuclear Information System (INIS)

Baehler, P.; Bosco, N.; Lingjaerde, T.; Ljuslin, C.; Van Praag, A.; Werner, P.

1986-01-01

The XOP processor has been designed for trigger calculation and data compression in high energy physics experiments. Therefore, emphasis has been placed upon fast execution and high input/output rate. The fast execution is achieved by a wide instruction word holding operations which are executed concurrently. Thus, the arithmetic operations, data address calculations, data accessing, condition checking, loop count checking and next instruction evaluation all overlap in time. In conventional micro-processors these operations are performed sequentially. In addition, the instruction set comprises not only the classical computer instructions, but also specialized instructions suitable for trigger calculations, such as bit search, population count, loose compare and vector instructions. In order to achieve a high input/output rate, each XOP ECLine interface board is equipped with an input and an output port which fulfil the LeCroy ECLine specifications. The autonomous input port allows a data rate of 40 Mbytes/sec, while the program controlled output port allows 20 Mbytes/sec. For Fastbus based systems a dual Fastbus master interface is under design which allows to build up a Fastbus multi-processor system. This design is being done in collaboration with LAPP Annecy for the CERN Lep L3 experiment. Their scheme comprises 4-5 XOP processors, each of them with a master interface on a data input segment and a master interface on a data output segment. This paper describes the structure of the XOP processor, the interface capabilities and the software development and debugging tools. (Auth.)

Discrete Fourier transformation processor based on complex radix (−1 + j number system

Directory of Open Access Journals (Sweden)

Anidaphi Shadap

2017-02-01

Full Text Available Complex radix (−1 + j allows the arithmetic operations of complex numbers to be done without treating the divide and conquer rules, which offers the significant speed improvement of complex numbers computation circuitry. Design and hardware implementation of complex radix (−1 + j converter has been introduced in this paper. Extensive simulation results have been incorporated and an application of this converter towards the implementation of discrete Fourier transformation (DFT processor has been presented. The functionality of the DFT processor have been verified in Xilinx ISE design suite version 14.7 and performance parameters like propagation delay and dynamic switching power consumption have been calculated by Virtuoso platform in Cadence. The proposed DFT processor has been implemented through conversion, multiplication and addition. The performance parameter matrix in terms of delay and power consumption offered a significant improvement over other traditional implementation of DFT processor.

Performance evaluation of throughput computing workloads using multi-core processors and graphics processors

Science.gov (United States)

Dave, Gaurav P.; Sureshkumar, N.; Blessy Trencia Lincy, S. S.

2017-11-01

Current trend in processor manufacturing focuses on multi-core architectures rather than increasing the clock speed for performance improvement. Graphic processors have become as commodity hardware for providing fast co-processing in computer systems. Developments in IoT, social networking web applications, big data created huge demand for data processing activities and such kind of throughput intensive applications inherently contains data level parallelism which is more suited for SIMD architecture based GPU. This paper reviews the architectural aspects of multi/many core processors and graphics processors. Different case studies are taken to compare performance of throughput computing applications using shared memory programming in OpenMP and CUDA API based programming.

The Molen Polymorphic Media Processor

NARCIS (Netherlands)

Kuzmanov, G.K.

2004-01-01

In this dissertation, we address high performance media processing based on a tightly coupled co-processor architectural paradigm. More specifically, we introduce a reconfigurable media augmentation of a general purpose processor and implement it into a fully operational processor prototype. The

Robust real-time pattern matching using bayesian sequential hypothesis testing.

Science.gov (United States)

Pele, Ofir; Werman, Michael

2008-08-01

This paper describes a method for robust real time pattern matching. We first introduce a family of image distance measures, the "Image Hamming Distance Family". Members of this family are robust to occlusion, small geometrical transforms, light changes and non-rigid deformations. We then present a novel Bayesian framework for sequential hypothesis testing on finite populations. Based on this framework, we design an optimal rejection/acceptance sampling algorithm. This algorithm quickly determines whether two images are similar with respect to a member of the Image Hamming Distance Family. We also present a fast framework that designs a near-optimal sampling algorithm. Extensive experimental results show that the sequential sampling algorithm performance is excellent. Implemented on a Pentium 4 3 GHz processor, detection of a pattern with 2197 pixels, in 640 x 480 pixel frames, where in each frame the pattern rotated and was highly occluded, proceeds at only 0.022 seconds per frame.

JPP: A Java Pre-Processor

OpenAIRE

Kiniry, Joseph R.; Cheong, Elaine

1998-01-01

The Java Pre-Processor, or JPP for short, is a parsing pre-processor for the Java programming language. Unlike its namesake (the C/C++ Pre-Processor, cpp), JPP provides functionality above and beyond simple textual substitution. JPP's capabilities include code beautification, code standard conformance checking, class and interface specification and testing, and documentation generation.

An introduction to programming multiple-processor computers

International Nuclear Information System (INIS)

Hicks, H.R.; Lynch, V.E.

1986-01-01

Fortran applications programs can be executed on multiprocessor computers in either a unitasking (traditional) or multitasking form. The later allows a single job to use more than one processor simultaneously, with a consequent reduction in elapsed time and, perhaps, the cost of the calculation. An introduction to programming in this environment is presented. The concept of synchronization and data sharing using EVENTS and LOCKS are illustrated with examples. The strategy of strong synchronization and the use of synchronization templates are proposed. We emphasize that incorrect multitasking programs can produce irreducible results, which makes debugging more difficult

Producing chopped firewood with firewood processors

International Nuclear Information System (INIS)

Kaerhae, K.; Jouhiaho, A.

2009-01-01

The TTS Institute's research and development project studied both the productivity of new, chopped firewood processors (cross-cutting and splitting machines) suitable for professional and independent small-scale production, and the costs of the chopped firewood produced. Seven chopped firewood processors were tested in the research, six of which were sawing processors and one shearing processor. The chopping work was carried out using wood feeding racks and a wood lifter. The work was also carried out without any feeding appliances. Altogether 132.5 solid m 3 of wood were chopped in the time studies. The firewood processor used had the most significant impact on chopping work productivity. In addition to the firewood processor, the stem mid-diameter, the length of the raw material, and of the firewood were also found to affect productivity. The wood feeding systems also affected productivity. If there is a feeding rack and hydraulic grapple loader available for use in chopping firewood, then it is worth using the wood feeding rack. A wood lifter is only worth using with the largest stems (over 20 cm mid-diameter) if a feeding rack cannot be used. When producing chopped firewood from small-diameter wood, i.e. with a mid-diameter less than 10 cm, the costs of chopping work were over 10 EUR solid m -3 with sawing firewood processors. The shearing firewood processor with a guillotine blade achieved a cost level of 5 EUR solid m -3 when the mid-diameter of the chopped stem was 10 cm. In addition to the raw material, the cost-efficient chopping work also requires several hundred annual operating hours with a firewood processor, which is difficult for individual firewood entrepreneurs to achieve. The operating hours of firewood processors can be increased to the required level by the joint use of the processors by a number of firewood entrepreneurs. (author)

Development of a new signal processor for tetralateral position sensitive detector based on single-chip microcomputer

International Nuclear Information System (INIS)

Huang Meizhen; Shi Longzhao; Wang Yuxing; Ni Yi; Li Zhenqing; Ding Haifeng

2006-01-01

An inherently nonlinear relation between the output current of the tetralateral position sensitive detector (PSD) and the position of the incident light spot has been found theoretically. Based on single-chip microcomputer and the theoretical relation between output current and position, a new signal processor capable of correcting nonlinearity and reducing position measurement deviation of tetralateral PSD was developed. A tetralateral PSD (S1200, 13x13 mm 2 , Hamamatsu Photonics K.K.) was measured with the new signal processor, a linear relation between the output position of the PSD, and the incident position of the light spot was obtained. In the 60% range of a 13x13 mm 2 active area, the position nonlinearity (rms) was 0.15% and the position measurement deviation (rms) was ±20 μm. Compared with traditional analog signal processor, the new signal processor is of better compatibility, lower cost, higher precision, and easier to be interfaced

Optical Associative Processors For Visual Perception"

Science.gov (United States)

Casasent, David; Telfer, Brian

1988-05-01

We consider various associative processor modifications required to allow these systems to be used for visual perception, scene analysis, and object recognition. For these applications, decisions on the class of the objects present in the input image are required and thus heteroassociative memories are necessary (rather than the autoassociative memories that have been given most attention). We analyze the performance of both associative processors and note that there is considerable difference between heteroassociative and autoassociative memories. We describe associative processors suitable for realizing functions such as: distortion invariance (using linear discriminant function memory synthesis techniques), noise and image processing performance (using autoassociative memories in cascade with with a heteroassociative processor and with a finite number of autoassociative memory iterations employed), shift invariance (achieved through the use of associative processors operating on feature space data), and the analysis of multiple objects in high noise (which is achieved using associative processing of the output from symbolic correlators). We detail and provide initial demonstrations of the use of associative processors operating on iconic, feature space and symbolic data, as well as adaptive associative processors.

AMD's 64-bit Opteron processor

CERN Multimedia

CERN. Geneva

2003-01-01

This talk concentrates on issues that relate to obtaining peak performance from the Opteron processor. Compiler options, memory layout, MPI issues in multi-processor configurations and the use of a NUMA kernel will be covered. A discussion of recent benchmarking projects and results will also be included.BiographiesDavid RichDavid directs AMD's efforts in high performance computing and also in the use of Opteron processors...

Composable processor virtualization for embedded systems

NARCIS (Netherlands)

Molnos, A.M.; Milutinovic, A.; She, D.; Goossens, K.G.W.

2010-01-01

Processor virtualization divides a physical processor's time among a set of virual machines, enabling efficient hardware utilization, application security and allowing co-existence of different operating systems on the same processor. Through initially intended for the server domain, virtualization

A Hybrid Scheme Based on Pipelining and Multitasking in Mobile Application Processors for Advanced Video Coding

Directory of Open Access Journals (Sweden)

Muhammad Asif

2015-01-01

Full Text Available One of the key requirements for mobile devices is to provide high-performance computing at lower power consumption. The processors used in these devices provide specific hardware resources to handle computationally intensive video processing and interactive graphical applications. Moreover, processors designed for low-power applications may introduce limitations on the availability and usage of resources, which present additional challenges to the system designers. Owing to the specific design of the JZ47x series of mobile application processors, a hybrid software-hardware implementation scheme for H.264/AVC encoder is proposed in this work. The proposed scheme distributes the encoding tasks among hardware and software modules. A series of optimization techniques are developed to speed up the memory access and data transferring among memories. Moreover, an efficient data reusage design is proposed for the deblock filter video processing unit to reduce the memory accesses. Furthermore, fine grained macroblock (MB level parallelism is effectively exploited and a pipelined approach is proposed for efficient utilization of hardware processing cores. Finally, based on parallelism in the proposed design, encoding tasks are distributed between two processing cores. Experiments show that the hybrid encoder is 12 times faster than a highly optimized sequential encoder due to proposed techniques.

Impact of traditional processing methods on some physico chemical ...

African Journals Online (AJOL)

AJB SERVER

2006-10-16

Oct 16, 2006 ... 1Department of Food Science and Technology, University of ... need to educate traditional processors on good manufacturing practices, .... Table 3. Physical Contaminants in Fermented Cassava flour (“Kpor Umilin”) Samples.

Deterministic chaos in the processor load

International Nuclear Information System (INIS)

Halbiniak, Zbigniew; Jozwiak, Ireneusz J.

2007-01-01

In this article we present the results of research whose purpose was to identify the phenomenon of deterministic chaos in the processor load. We analysed the time series of the processor load during efficiency tests of database software. Our research was done on a Sparc Alpha processor working on the UNIX Sun Solaris 5.7 operating system. The conducted analyses proved the presence of the deterministic chaos phenomenon in the processor load in this particular case

Neurovision processor for designing intelligent sensors

Science.gov (United States)

Gupta, Madan M.; Knopf, George K.

1992-03-01

A programmable multi-task neuro-vision processor, called the Positive-Negative (PN) neural processor, is proposed as a plausible hardware mechanism for constructing robust multi-task vision sensors. The computational operations performed by the PN neural processor are loosely based on the neural activity fields exhibited by certain nervous tissue layers situated in the brain. The neuro-vision processor can be programmed to generate diverse dynamic behavior that may be used for spatio-temporal stabilization (STS), short-term visual memory (STVM), spatio-temporal filtering (STF) and pulse frequency modulation (PFM). A multi- functional vision sensor that performs a variety of information processing operations on time- varying two-dimensional sensory images can be constructed from a parallel and hierarchical structure of numerous individually programmed PN neural processors.

A Real-Time Sound Field Rendering Processor

Directory of Open Access Journals (Sweden)

Tan Yiyu

2017-12-01

Full Text Available Real-time sound field renderings are computationally intensive and memory-intensive. Traditional rendering systems based on computer simulations suffer from memory bandwidth and arithmetic units. The computation is time-consuming, and the sample rate of the output sound is low because of the long computation time at each time step. In this work, a processor with a hybrid architecture is proposed to speed up computation and improve the sample rate of the output sound, and an interface is developed for system scalability through simply cascading many chips to enlarge the simulated area. To render a three-minute Beethoven wave sound in a small shoe-box room with dimensions of 1.28 m × 1.28 m × 0.64 m, the field programming gate array (FPGA-based prototype machine with the proposed architecture carries out the sound rendering at run-time while the software simulation with the OpenMP parallelization takes about 12.70 min on a personal computer (PC with 32 GB random access memory (RAM and an Intel i7-6800K six-core processor running at 3.4 GHz. The throughput in the software simulation is about 194 M grids/s while it is 51.2 G grids/s in the prototype machine even if the clock frequency of the prototype machine is much lower than that of the PC. The rendering processor with a processing element (PE and interfaces consumes about 238,515 gates after fabricated by the 0.18 µm processing technology from the ROHM semiconductor Co., Ltd. (Kyoto Japan, and the power consumption is about 143.8 mW.

VIRTUS: a multi-processor system in FASTBUS

International Nuclear Information System (INIS)

Ellett, J.; Jackson, R.; Ritter, R.; Schlein, P.; Yaeger, D.; Zweizig, J.

1986-01-01

VIRTUS is a system of parallel MC68000-based processors interconnected by FASTBUS that is used either on-line as an intelligent trigger component or off-line for full event processing. Each processor receives the complete set of data from one event. The host computer, a VAX 11/780, down-line loads all software to the processors, controls and monitors the functioning of all processors, and writes processed data to tape. Instructions, programs, and data are transferred among the processors and the host in the form of fixed format, variable length data blocks. (Auth.)

A lock circuit for a multi-core processor

DEFF Research Database (Denmark)

2015-01-01

An integrated circuit comprising a multiple processor cores and a lock circuit that comprises a queue register with respective bits set or reset via respective, connections dedicated to respective processor cores, whereby the queue register identifies those among the multiple processor cores...... that are enqueued in the queue register. Furthermore, the integrated circuit comprises a current register and a selector circuit configured to select a processor core and identify that processor core by a value in the current register. A selected processor core is a prioritized processor core among the cores...... configured with an integrated circuit; and a silicon die configured with an integrated circuit....

Addressing Thermal and Performance Variability Issues in Dynamic Processors

Energy Technology Data Exchange (ETDEWEB)

Yoshii, Kazutomo [Argonne National Lab. (ANL), Argonne, IL (United States); Llopis, Pablo [Univ. Carlos III de Madrid (Spain); Zhang, Kaicheng [Northwestern Univ., Evanston, IL (United States); Luo, Yingyi [Northwestern Univ., Evanston, IL (United States); Ogrenci-Memik, Seda [Northwestern Univ., Evanston, IL (United States); Memik, Gokhan [Northwestern Univ., Evanston, IL (United States); Sankaran, Rajesh [Argonne National Lab. (ANL), Argonne, IL (United States); Beckman, Pete [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-03-01

As CMOS scaling nears its end, parameter variations (process, temperature and voltage) are becoming a major concern. To overcome parameter variations and provide stability, modern processors are becoming dynamic, opportunistically adjusting voltage and frequency based on thermal and energy constraints, which negatively impacts traditional bulk-synchronous parallelism-minded hardware and software designs. As node-level architecture is growing in complexity, implementing variation control mechanisms only with hardware can be a challenging task. In this paper we investigate a software strategy to manage hardwareinduced variations, leveraging low-level monitoring/controlling mechanisms.

Sensitometric control of roentgen film processors

International Nuclear Information System (INIS)

Forsberg, H.; Karolinska Sjukhuset, Stockholm

1987-01-01

Monitoring of film processors performance is essential since image quality, patient dose and costs are influenced by the performance. A system for sensitometric constancy control of film processors and their associated components is described. Experience with the system for 3 years is given when implemented on 17 film processors. Modern high quality film processors have a stability that makes a test frequency of once a week sufficient to maintain adequate image quality. The test system is so sensitive that corrective actions almost invariably have been taken before any technical problem degraded the image quality to a visible degree. (orig.)

Special purpose processors for high energy physics applications

International Nuclear Information System (INIS)

Verkerk, C.

1978-01-01

The review on the subject of hardware processors from very fast decision logic for the split field magnet facility at CERN, to a point-finding processor used to relieve the data-acquisition minicomputer from the task of monitoring the SPS experiment is given. Block diagrams of decision making processor, point-finding processor, complanarity and opening angle processor and programmable track selector module are presented and discussed. The applications of fully programmable but slower processor on the one hand, and very fast and programmable decision logic on the other hand are given in this review

The Central Trigger Processor (CTP)

CERN Multimedia

Franchini, Matteo

2016-01-01

The Central Trigger Processor (CTP) receives trigger information from the calorimeter and muon trigger processors, as well as from other sources of trigger. It makes the Level-1 decision (L1A) based on a trigger menu.

SAD PROCESSOR FOR MULTIPLE MACROBLOCK MATCHING IN FAST SEARCH VIDEO MOTION ESTIMATION

Directory of Open Access Journals (Sweden)

Nehal N. Shah

2015-02-01

Full Text Available Motion estimation is a very important but computationally complex task in video coding. Process of determining motion vectors based on the temporal correlation of consecutive frame is used for video compression. In order to reduce the computational complexity of motion estimation and maintain the quality of encoding during motion compensation, different fast search techniques are available. These block based motion estimation algorithms use the sum of absolute difference (SAD between corresponding macroblock in current frame and all the candidate macroblocks in the reference frame to identify best match. Existing implementations can perform SAD between two blocks using sequential or pipeline approach but performing multi operand SAD in single clock cycle with optimized recourses is state of art. In this paper various parallel architectures for computation of the fixed block size SAD is evaluated and fast parallel SAD architecture is proposed with optimized resources. Further SAD processor is described with 9 processing elements which can be configured for any existing fast search block matching algorithm. Proposed SAD processor consumes 7% fewer adders compared to existing implementation for one processing elements. Using nine PE it can process 84 HD frames per second in worse case which is good outcome for real time implementation. In average case architecture process 325 HD frames per second.

Very Long Instruction Word Processors

Indian Academy of Sciences (India)

Pentium Processor have modified the processor architecture to exploit parallelism in a program. .... The type of operation itself is encoded using 14 bits. .... text of designing simple architectures with low power consump- tion and execute x86 ...

Computational Particle Dynamic Simulations on Multicore Processors (CPDMu) Final Report Phase I

Energy Technology Data Exchange (ETDEWEB)

Schmalz, Mark S

2011-07-24

Statement of Problem - Department of Energy has many legacy codes for simulation of computational particle dynamics and computational fluid dynamics applications that are designed to run on sequential processors and are not easily parallelized. Emerging high-performance computing architectures employ massively parallel multicore architectures (e.g., graphics processing units) to increase throughput. Parallelization of legacy simulation codes is a high priority, to achieve compatibility, efficiency, accuracy, and extensibility. General Statement of Solution - A legacy simulation application designed for implementation on mainly-sequential processors has been represented as a graph G. Mathematical transformations, applied to G, produce a graph representation {und G} for a high-performance architecture. Key computational and data movement kernels of the application were analyzed/optimized for parallel execution using the mapping G {yields} {und G}, which can be performed semi-automatically. This approach is widely applicable to many types of high-performance computing systems, such as graphics processing units or clusters comprised of nodes that contain one or more such units. Phase I Accomplishments - Phase I research decomposed/profiled computational particle dynamics simulation code for rocket fuel combustion into low and high computational cost regions (respectively, mainly sequential and mainly parallel kernels), with analysis of space and time complexity. Using the research team's expertise in algorithm-to-architecture mappings, the high-cost kernels were transformed, parallelized, and implemented on Nvidia Fermi GPUs. Measured speedups (GPU with respect to single-core CPU) were approximately 20-32X for realistic model parameters, without final optimization. Error analysis showed no loss of computational accuracy. Commercial Applications and Other Benefits - The proposed research will constitute a breakthrough in solution of problems related to efficient

Experimental testing of the noise-canceling processor.

Science.gov (United States)

Collins, Michael D; Baer, Ralph N; Simpson, Harry J

2011-09-01

Signal-processing techniques for localizing an acoustic source buried in noise are tested in a tank experiment. Noise is generated using a discrete source, a bubble generator, and a sprinkler. The experiment has essential elements of a realistic scenario in matched-field processing, including complex source and noise time series in a waveguide with water, sediment, and multipath propagation. The noise-canceling processor is found to outperform the Bartlett processor and provide the correct source range for signal-to-noise ratios below -10 dB. The multivalued Bartlett processor is found to outperform the Bartlett processor but not the noise-canceling processor. © 2011 Acoustical Society of America

Development of a highly reliable CRT processor

International Nuclear Information System (INIS)

Shimizu, Tomoya; Saiki, Akira; Hirai, Kenji; Jota, Masayoshi; Fujii, Mikiya

1996-01-01

Although CRT processors have been employed by the main control board to reduce the operator's workload during monitoring, the control systems are still operated by hardware switches. For further advancement, direct controller operation through a display device is expected. A CRT processor providing direct controller operation must be as reliable as the hardware switches are. The authors are developing a new type of highly reliable CRT processor that enables direct controller operations. In this paper, we discuss the design principles behind a highly reliable CRT processor. The principles are defined by studies of software reliability and of the functional reliability of the monitoring and operation systems. The functional configuration of an advanced CRT processor is also addressed. (author)

Computer Generated Inputs for NMIS Processor Verification

International Nuclear Information System (INIS)

J. A. Mullens; J. E. Breeding; J. A. McEvers; R. W. Wysor; L. G. Chiang; J. R. Lenarduzzi; J. T. Mihalczo; J. K. Mattingly

2001-01-01

Proper operation of the Nuclear Identification Materials System (NMIS) processor can be verified using computer-generated inputs [BIST (Built-In-Self-Test)] at the digital inputs. Preselected sequences of input pulses to all channels with known correlation functions are compared to the output of the processor. These types of verifications have been utilized in NMIS type correlation processors at the Oak Ridge National Laboratory since 1984. The use of this test confirmed a malfunction in a NMIS processor at the All-Russian Scientific Research Institute of Experimental Physics (VNIIEF) in 1998. The NMIS processor boards were returned to the U.S. for repair and subsequently used in NMIS passive and active measurements with Pu at VNIIEF in 1999

3081//sub E/ processor

International Nuclear Information System (INIS)

Kunz, P.F.; Gravina, M.; Oxoby, G.; Trang, Q.; Fucci, A.; Jacobs, D.; Martin, B.; Storr, K.

1983-03-01

Since the introduction of the 168//sub E/, emulating processors have been successful over an amazingly wide range of applications. This paper will describe a second generation processor, the 3081//sub E/. This new processor, which is being developed as a collaboration between SLAC and CERN, goes beyond just fixing the obvious faults of the 168//sub E/. Not only will the 3081//sub E/ have much more memory space, incorporate many more IBM instructions, and have much more memory space, incorporate many more IBM instructions, and have full double precision floating point arithmetic, but it will also have faster execution times and be much simpler to build, debug, and maintain. The simple interface and reasonable cost of the 168//sub E/ will be maintained for the 3081//sub E/

Automotive Fuel Processor Development and Demonstration with Fuel Cell Systems

Energy Technology Data Exchange (ETDEWEB)

Nuvera Fuel Cells

2005-04-15

The potential for fuel cell systems to improve energy efficiency and reduce emissions over conventional power systems has generated significant interest in fuel cell technologies. While fuel cells are being investigated for use in many applications such as stationary power generation and small portable devices, transportation applications present some unique challenges for fuel cell technology. Due to their lower operating temperature and non-brittle materials, most transportation work is focusing on fuel cells using proton exchange membrane (PEM) technology. Since PEM fuel cells are fueled by hydrogen, major obstacles to their widespread use are the lack of an available hydrogen fueling infrastructure and hydrogen's relatively low energy storage density, which leads to a much lower driving range than conventional vehicles. One potential solution to the hydrogen infrastructure and storage density issues is to convert a conventional fuel such as gasoline into hydrogen onboard the vehicle using a fuel processor. Figure 2 shows that gasoline stores roughly 7 times more energy per volume than pressurized hydrogen gas at 700 bar and 4 times more than liquid hydrogen. If integrated properly, the fuel processor/fuel cell system would also be more efficient than traditional engines and would give a fuel economy benefit while hydrogen storage and distribution issues are being investigated. Widespread implementation of fuel processor/fuel cell systems requires improvements in several aspects of the technology, including size, startup time, transient response time, and cost. In addition, the ability to operate on a number of hydrocarbon fuels that are available through the existing infrastructure is a key enabler for commercializing these systems. In this program, Nuvera Fuel Cells collaborated with the Department of Energy (DOE) to develop efficient, low-emission, multi-fuel processors for transportation applications. Nuvera's focus was on (1) developing fuel

Multimode power processor

Science.gov (United States)

O'Sullivan, George A.; O'Sullivan, Joseph A.

1999-01-01

In one embodiment, a power processor which operates in three modes: an inverter mode wherein power is delivered from a battery to an AC power grid or load; a battery charger mode wherein the battery is charged by a generator; and a parallel mode wherein the generator supplies power to the AC power grid or load in parallel with the battery. In the parallel mode, the system adapts to arbitrary non-linear loads. The power processor may operate on a per-phase basis wherein the load may be synthetically transferred from one phase to another by way of a bumpless transfer which causes no interruption of power to the load when transferring energy sources. Voltage transients and frequency transients delivered to the load when switching between the generator and battery sources are minimized, thereby providing an uninterruptible power supply. The power processor may be used as part of a hybrid electrical power source system which may contain, in one embodiment, a photovoltaic array, diesel engine, and battery power sources.

PixonVision real-time video processor

Science.gov (United States)

Puetter, R. C.; Hier, R. G.

2007-09-01

PixonImaging LLC and DigiVision, Inc. have developed a real-time video processor, the PixonVision PV-200, based on the patented Pixon method for image deblurring and denoising, and DigiVision's spatially adaptive contrast enhancement processor, the DV1000. The PV-200 can process NTSC and PAL video in real time with a latency of 1 field (1/60 th of a second), remove the effects of aerosol scattering from haze, mist, smoke, and dust, improve spatial resolution by up to 2x, decrease noise by up to 6x, and increase local contrast by up to 8x. A newer version of the processor, the PV-300, is now in prototype form and can handle high definition video. Both the PV-200 and PV-300 are FPGA-based processors, which could be spun into ASICs if desired. Obvious applications of these processors include applications in the DOD (tanks, aircraft, and ships), homeland security, intelligence, surveillance, and law enforcement. If developed into an ASIC, these processors will be suitable for a variety of portable applications, including gun sights, night vision goggles, binoculars, and guided munitions. This paper presents a variety of examples of PV-200 processing, including examples appropriate to border security, battlefield applications, port security, and surveillance from unmanned aerial vehicles.

Processors and systems (picture processing)

Energy Technology Data Exchange (ETDEWEB)

Gemmar, P

1983-01-01

Automatic picture processing requires high performance computers and high transmission capacities in the processor units. The author examines the possibilities of operating processors in parallel in order to accelerate the processing of pictures. He therefore discusses a number of available processors and systems for picture processing and illustrates their capacities for special types of picture processing. He stresses the fact that the amount of storage required for picture processing is exceptionally high. The author concludes that it is as yet difficult to decide whether very large groups of simple processors or highly complex multiprocessor systems will provide the best solution. Both methods will be aided by the development of VLSI. New solutions have already been offered (systolic arrays and 3-d processing structures) but they also are subject to losses caused by inherently parallel algorithms. Greater efforts must be made to produce suitable software for multiprocessor systems. Some possibilities for future picture processing systems are discussed. 33 references.

Special processor for in-core control systems

International Nuclear Information System (INIS)

Golovanov, M.N.; Duma, V.R.; Levin, G.L.; Mel'nikov, A.V.; Polikanin, A.V.; Filatov, V.P.

1978-01-01

The BUTs-20 special processor is discussed, designed to control the units of the in-core control equipment which are incorporated into the VECTOR communication channel, and to provide preliminary data processing prior to computer calculations. A set of instructions and flowsheet of the processor, organization of its communication with memories and other units of the system are given. The processor components: a control unit and an arithmetic logical unit are discussed. It is noted that the special processor permits more effective utilization of the computer time

On-board landmark navigation and attitude reference parallel processor system

Science.gov (United States)

Gilbert, L. E.; Mahajan, D. T.

1978-01-01

An approach to autonomous navigation and attitude reference for earth observing spacecraft is described along with the landmark identification technique based on a sequential similarity detection algorithm (SSDA). Laboratory experiments undertaken to determine if better than one pixel accuracy in registration can be achieved consistent with onboard processor timing and capacity constraints are included. The SSDA is implemented using a multi-microprocessor system including synchronization logic and chip library. The data is processed in parallel stages, effectively reducing the time to match the small known image within a larger image as seen by the onboard image system. Shared memory is incorporated in the system to help communicate intermediate results among microprocessors. The functions include finding mean values and summation of absolute differences over the image search area. The hardware is a low power, compact unit suitable to onboard application with the flexibility to provide for different parameters depending upon the environment.

Functional Verification of Enhanced RISC Processor

OpenAIRE

SHANKER NILANGI; SOWMYA L

2013-01-01

This paper presents design and verification of a 32-bit enhanced RISC processor core having floating point computations integrated within the core, has been designed to reduce the cost and complexity. The designed 3 stage pipelined 32-bit RISC processor is based on the ARM7 processor architecture with single precision floating point multiplier, floating point adder/subtractor for floating point operations and 32 x 32 booths multiplier added to the integer core of ARM7. The binary representati...

Effect of processor temperature on film dosimetry

International Nuclear Information System (INIS)

Srivastava, Shiv P.; Das, Indra J.

2012-01-01

Optical density (OD) of a radiographic film plays an important role in radiation dosimetry, which depends on various parameters, including beam energy, depth, field size, film batch, dose, dose rate, air film interface, postexposure processing time, and temperature of the processor. Most of these parameters have been studied for Kodak XV and extended dose range (EDR) films used in radiation oncology. There is very limited information on processor temperature, which is investigated in this study. Multiple XV and EDR films were exposed in the reference condition (d max. , 10 × 10 cm 2 , 100 cm) to a given dose. An automatic film processor (X-Omat 5000) was used for processing films. The temperature of the processor was adjusted manually with increasing temperature. At each temperature, a set of films was processed to evaluate OD at a given dose. For both films, OD is a linear function of processor temperature in the range of 29.4–40.6°C (85–105°F) for various dose ranges. The changes in processor temperature are directly related to the dose by a quadratic function. A simple linear equation is provided for the changes in OD vs. processor temperature, which could be used for correcting dose in radiation dosimetry when film is used.

Bank switched memory interface for an image processor

International Nuclear Information System (INIS)

Barron, M.; Downward, J.

1980-09-01

A commercially available image processor is interfaced to a PDP-11/45 through an 8K window of memory addresses. When the image processor was not in use it was desired to be able to use the 8K address space as real memory. The standard method of accomplishing this would have been to use UNIBUS switches to switch in either the physical 8K bank of memory or the image processor memory. This method has the disadvantage of being rather expensive. As a simple alternative, a device was built to selectively enable or disable either an 8K bank of memory or the image processor memory. To enable the image processor under program control, GEN is contracted in size, the memory is disabled, a device partition for the image processor is created above GEN, and the image processor memory is enabled. The process is reversed to restore memory to GEN. The hardware to enable/disable the image and computer memories is controlled using spare bits from a DR-11K output register. The image processor and physical memory can be switched in or out on line with no adverse affects on the system's operation

VON WISPR Family Processors: Volume 1

National Research Council Canada - National Science Library

Wagstaff, Ronald

1997-01-01

...) and the background noise they are embedded in. Processors utilizing those fluctuations such as the von WISPR Family Processors discussed herein, are methods or algorithms that preferentially attenuate the fluctuating signals and noise...

A Bayesian sequential design with adaptive randomization for 2-sided hypothesis test.

Science.gov (United States)

Yu, Qingzhao; Zhu, Lin; Zhu, Han

2017-11-01

Bayesian sequential and adaptive randomization designs are gaining popularity in clinical trials thanks to their potentials to reduce the number of required participants and save resources. We propose a Bayesian sequential design with adaptive randomization rates so as to more efficiently attribute newly recruited patients to different treatment arms. In this paper, we consider 2-arm clinical trials. Patients are allocated to the 2 arms with a randomization rate to achieve minimum variance for the test statistic. Algorithms are presented to calculate the optimal randomization rate, critical values, and power for the proposed design. Sensitivity analysis is implemented to check the influence on design by changing the prior distributions. Simulation studies are applied to compare the proposed method and traditional methods in terms of power and actual sample sizes. Simulations show that, when total sample size is fixed, the proposed design can obtain greater power and/or cost smaller actual sample size than the traditional Bayesian sequential design. Finally, we apply the proposed method to a real data set and compare the results with the Bayesian sequential design without adaptive randomization in terms of sample sizes. The proposed method can further reduce required sample size. Copyright © 2017 John Wiley & Sons, Ltd.

Many - body simulations using an array processor

International Nuclear Information System (INIS)

Rapaport, D.C.

1985-01-01

Simulations of microscopic models of water and polypeptides using molecular dynamics and Monte Carlo techniques have been carried out with the aid of an FPS array processor. The computational techniques are discussed, with emphasis on the development and optimization of the software to take account of the special features of the processor. The computing requirements of these simulations exceed what could be reasonably carried out on a normal 'scientific' computer. While the FPS processor is highly suited to the kinds of models described, several other computationally intensive problems in statistical mechanics are outlined for which alternative processor architectures are more appropriate

Parallel discrete event simulation using shared memory

Science.gov (United States)

Reed, Daniel A.; Malony, Allen D.; Mccredie, Bradley D.

1988-01-01

With traditional event-list techniques, evaluating a detailed discrete-event simulation-model can often require hours or even days of computation time. By eliminating the event list and maintaining only sufficient synchronization to ensure causality, parallel simulation can potentially provide speedups that are linear in the numbers of processors. A set of shared-memory experiments, using the Chandy-Misra distributed-simulation algorithm, to simulate networks of queues is presented. Parameters of the study include queueing network topology and routing probabilities, number of processors, and assignment of network nodes to processors. These experiments show that Chandy-Misra distributed simulation is a questionable alternative to sequential-simulation of most queueing network models.

Multi-processor network implementations in Multibus II and VME

International Nuclear Information System (INIS)

Briegel, C.

1992-01-01

ACNET (Fermilab Accelerator Controls Network), a proprietary network protocol, is implemented in a multi-processor configuration for both Multibus II and VME. The implementations are contrasted by the bus protocol and software design goals. The Multibus II implementation provides for multiple processors running a duplicate set of tasks on each processor. For a network connected task, messages are distributed by a network round-robin scheduler. Further, messages can be stopped, continued, or re-routed for each task by user-callable commands. The VME implementation provides for multiple processors running one task across all processors. The process can either be fixed to a particular processor or dynamically allocated to an available processor depending on the scheduling algorithm of the multi-processing operating system. (author)

The composite sequential clustering technique for analysis of multispectral scanner data

Science.gov (United States)

Su, M. Y.

1972-01-01

The clustering technique consists of two parts: (1) a sequential statistical clustering which is essentially a sequential variance analysis, and (2) a generalized K-means clustering. In this composite clustering technique, the output of (1) is a set of initial clusters which are input to (2) for further improvement by an iterative scheme. This unsupervised composite technique was employed for automatic classification of two sets of remote multispectral earth resource observations. The classification accuracy by the unsupervised technique is found to be comparable to that by traditional supervised maximum likelihood classification techniques. The mathematical algorithms for the composite sequential clustering program and a detailed computer program description with job setup are given.

Parallel discrete event simulation: A shared memory approach

Science.gov (United States)

Reed, Daniel A.; Malony, Allen D.; Mccredie, Bradley D.

1987-01-01

With traditional event list techniques, evaluating a detailed discrete event simulation model can often require hours or even days of computation time. Parallel simulation mimics the interacting servers and queues of a real system by assigning each simulated entity to a processor. By eliminating the event list and maintaining only sufficient synchronization to insure causality, parallel simulation can potentially provide speedups that are linear in the number of processors. A set of shared memory experiments is presented using the Chandy-Misra distributed simulation algorithm to simulate networks of queues. Parameters include queueing network topology and routing probabilities, number of processors, and assignment of network nodes to processors. These experiments show that Chandy-Misra distributed simulation is a questionable alternative to sequential simulation of most queueing network models.

Evaluation of the Intel Sandy Bridge-EP server processor

CERN Document Server

Jarp, S; Leduc, J; Nowak, A; CERN. Geneva. IT Department

2012-01-01

In this paper we report on a set of benchmark results recently obtained by CERN openlab when comparing an 8-core “Sandy Bridge-EP” processor with Intel’s previous microarchitecture, the “Westmere-EP”. The Intel marketing names for these processors are “Xeon E5-2600 processor series” and “Xeon 5600 processor series”, respectively. Both processors are produced in a 32nm process, and both platforms are dual-socket servers. Multiple benchmarks were used to get a good understanding of the performance of the new processor. We used both industry-standard benchmarks, such as SPEC2006, and specific High Energy Physics benchmarks, representing both simulation of physics detectors and data analysis of physics events. Before summarizing the results we must stress the fact that benchmarking of modern processors is a very complex affair. One has to control (at least) the following features: processor frequency, overclocking via Turbo mode, the number of physical cores in use, the use of logical cores ...

Array processors based on Gaussian fraction-free method

Energy Technology Data Exchange (ETDEWEB)

Peng, S; Sedukhin, S [Aizu Univ., Aizuwakamatsu, Fukushima (Japan); Sedukhin, I

1998-03-01

The design of algorithmic array processors for solving linear systems of equations using fraction-free Gaussian elimination method is presented. The design is based on a formal approach which constructs a family of planar array processors systematically. These array processors are synthesized and analyzed. It is shown that some array processors are optimal in the framework of linear allocation of computations and in terms of number of processing elements and computing time. (author)

Dynamic anticipatory processing of hierarchical sequential events: a common role for Broca's area and ventral premotor cortex across domains?

Science.gov (United States)

Fiebach, Christian J; Schubotz, Ricarda I

2006-05-01

This paper proposes a domain-general model for the functional contribution of ventral premotor cortex (PMv) and adjacent Broca's area to perceptual, cognitive, and motor processing. We propose to understand this frontal region as a highly flexible sequence processor, with the PMv mapping sequential events onto stored structural templates and Broca's Area involved in more complex, hierarchical or hypersequential processing. This proposal is supported by reference to previous functional neuroimaging studies investigating abstract sequence processing and syntactic processing.

Multiple Embedded Processors for Fault-Tolerant Computing

Science.gov (United States)

Bolotin, Gary; Watson, Robert; Katanyoutanant, Sunant; Burke, Gary; Wang, Mandy

2005-01-01

A fault-tolerant computer architecture has been conceived in an effort to reduce vulnerability to single-event upsets (spurious bit flips caused by impingement of energetic ionizing particles or photons). As in some prior fault-tolerant architectures, the redundancy needed for fault tolerance is obtained by use of multiple processors in one computer. Unlike prior architectures, the multiple processors are embedded in a single field-programmable gate array (FPGA). What makes this new approach practical is the recent commercial availability of FPGAs that are capable of having multiple embedded processors. A working prototype (see figure) consists of two embedded IBM PowerPC 405 processor cores and a comparator built on a Xilinx Virtex-II Pro FPGA. This relatively simple instantiation of the architecture implements an error-detection scheme. A planned future version, incorporating four processors and two comparators, would correct some errors in addition to detecting them.

Online track processor for the CDF upgrade

International Nuclear Information System (INIS)

Thomson, E. J.

2002-01-01

A trigger track processor, called the eXtremely Fast Tracker (XFT), has been designed for the CDF upgrade. This processor identifies high transverse momentum (> 1.5 GeV/c) charged particles in the new central outer tracking chamber for CDF II. The XFT design is highly parallel to handle the input rate of 183 Gbits/s and output rate of 44 Gbits/s. The processor is pipelined and reports the result for a new event every 132 ns. The processor uses three stages: hit classification, segment finding, and segment linking. The pattern recognition algorithms for the three stages are implemented in programmable logic devices (PLDs) which allow in-situ modification of the algorithm at any time. The PLDs reside on three different types of modules. The complete system has been installed and commissioned at CDF II. An overview of the track processor and performance in CDF Run II are presented

Design Principles for Synthesizable Processor Cores

DEFF Research Database (Denmark)

Schleuniger, Pascal; McKee, Sally A.; Karlsson, Sven

2012-01-01

As FPGAs get more competitive, synthesizable processor cores become an attractive choice for embedded computing. Currently popular commercial processor cores do not fully exploit current FPGA architectures. In this paper, we propose general design principles to increase instruction throughput...

Data register and processor for multiwire chambers

International Nuclear Information System (INIS)

Karpukhin, V.V.

1985-01-01

A data register and a processor for data receiving and processing from drift chambers of a device for investigating relativistic positroniums are described. The data are delivered to the register input in the form of the Grey 8 bit code, memorized and transformed to a position code. The register information is delivered to the KAMAK trunk and to the front panel plug. The processor selects particle tracks in a horizontal plane of the facility. ΔY maximum coordinate divergence and minimum point quantity on the track are set from the processor front panel. Processor solution time is 16 μs maximum quantity of simultaneously analyzed coordinates is 16

Development methods for VLSI-processors

International Nuclear Information System (INIS)

Horninger, K.; Sandweg, G.

1982-01-01

The aim of this project, which was originally planed for 3 years, was the development of modern system and circuit concepts, for VLSI-processors having a 32 bit wide data path. The result of this first years work is the concept of a general purpose processor. This processor is not only logically but also physically (on the chip) divided into four functional units: a microprogrammable instruction unit, an execution unit in slice technique, a fully associative cache memory and an I/O unit. For the ALU of the execution unit circuits in PLA and slice techniques have been realized. On the basis of regularity, area consumption and achievable performance the slice technique has been prefered. The designs utilize selftesting circuitry. (orig.) [de

The performance of an LSI-11/23 with a SKYMNK-Q array processor as a high speed front end processor

International Nuclear Information System (INIS)

Clark, D.L.

1983-01-01

The NSRL has recently installed a VAX-11/750 based data acquisition system which is networked to two LSI-11/23 satellite processors. Each of the LSI's are connected to CAMAC branch drivers. The LSI's have small array processors installed for use in preprocessing data. The objective is to provide an easy to use high speed processor that will relieve the VAX of some of the real-time data analysis tasks. The basic operation of the array processor and some of the results of performance tests are described

Embedded Processor Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The Embedded Processor Laboratory provides the means to design, develop, fabricate, and test embedded computers for missile guidance electronics systems in support...

Multi-Core Processor Memory Contention Benchmark Analysis Case Study

Science.gov (United States)

Simon, Tyler; McGalliard, James

2009-01-01

Multi-core processors dominate current mainframe, server, and high performance computing (HPC) systems. This paper provides synthetic kernel and natural benchmark results from an HPC system at the NASA Goddard Space Flight Center that illustrate the performance impacts of multi-core (dual- and quad-core) vs. single core processor systems. Analysis of processor design, application source code, and synthetic and natural test results all indicate that multi-core processors can suffer from significant memory subsystem contention compared to similar single-core processors.

Architectural design and analysis of a programmable image processor

International Nuclear Information System (INIS)

Siyal, M.Y.; Chowdhry, B.S.; Rajput, A.Q.K.

2003-01-01

In this paper we present an architectural design and analysis of a programmable image processor, nicknamed Snake. The processor was designed with a high degree of parallelism to speed up a range of image processing operations. Data parallelism found in array processors has been included into the architecture of the proposed processor. The implementation of commonly used image processing algorithms and their performance evaluation are also discussed. The performance of Snake is also compared with other types of processor architectures. (author)

Analytical Bounds on the Threads in IXP1200 Network Processor

OpenAIRE

Ramakrishna, STGS; Jamadagni, HS

2003-01-01

Increasing link speeds have placed enormous burden on the processing requirements and the processors are expected to carry out a variety of tasks. Network Processors (NP) [1] [2] is the blanket name given to the processors, which are traded for flexibility and performance. Network Processors are offered by a number of vendors; to take the main burden of processing requirement of network related operations from the conventional processors. The Network Processors cover a spectrum of design trad...

Trial Sequential Analysis in systematic reviews with meta-analysis

DEFF Research Database (Denmark)

Wetterslev, Jørn; Jakobsen, Janus Christian; Gluud, Christian

2017-01-01

BACKGROUND: Most meta-analyses in systematic reviews, including Cochrane ones, do not have sufficient statistical power to detect or refute even large intervention effects. This is why a meta-analysis ought to be regarded as an interim analysis on its way towards a required information size...... from traditional meta-analyses using unadjusted naïve 95% confidence intervals and 5% thresholds for statistical significance. Spurious conclusions in systematic reviews with traditional meta-analyses can be reduced using Trial Sequential Analysis. Several empirical studies have demonstrated...

A UNIX-based prototype biomedical virtual image processor

International Nuclear Information System (INIS)

Fahy, J.B.; Kim, Y.

1987-01-01

The authors have developed a multiprocess virtual image processor for the IBM PC/AT, in order to maximize image processing software portability for biomedical applications. An interprocess communication scheme, based on two-way metacode exchange, has been developed and verified for this purpose. Application programs call a device-independent image processing library, which transfers commands over a shared data bridge to one or more Autonomous Virtual Image Processors (AVIP). Each AVIP runs as a separate process in the UNIX operating system, and implements the device-independent functions on the image processor to which it corresponds. Application programs can control multiple image processors at a time, change the image processor configuration used at any time, and are completely portable among image processors for which an AVIP has been implemented. Run-time speeds have been found to be acceptable for higher level functions, although rather slow for lower level functions, owing to the overhead associated with sending commands and data over the shared data bridge

Generation of sea ice geophysical flux estimates utilizing a multisensor data processor in preparation for the RADARSAT and EOS eras

International Nuclear Information System (INIS)

Holt, B.; Kwok, R.; Carsey, F.; Curlander, J.

1991-01-01

A geophysical processor for deriving sea ice type and ice motion information from sequential SAR image data has been designed and is in implementation phase for use with ERS-1 SAR data at the Alaska SAR Facility (ASF). This SAR ice data processor, called the ASF Geophysical Processing System, or ASF-GPS, will be in place for launch in May 1991. Descriptions of the salient aspects of ASF-GPS and its current status are presented. The next step in the evolution of processors for geophysical descriptions of sea ice is now in design phase; it involves the utilization of data from other sensors and sources and the generation of higher-level products. The augmented data are environmental, e.g., weather agency analyses, satellite-derived surface temperatures and drifting buoy data. These data serve to (1) improve the performance of the basic data product generation, the ice type and motion data sets, by increasing accuracy and shortening processing time, and (2) extend the level of the data products by computation of key geophysical fluxes. Geophysical quantities required from the sea ice processor include the surface heat, momentum, brine and freshwater fluxes, radiation balance, snow cover, melt pond cover and thermodynamic state. The estimation of two of these fluxes, brine and freshwater, is discussed, and the requirements for suitable environmental data are also presented. Finally, the system design of the ASF-GPS and the follow-on processor, designed initially to utilize SAR data from RADARSAT with weather and other inputs, e.g., AVHRR, and, after upgrade, from the suite of EOS instruments, will be presented. As now envisioned this system will have layered architecture with major branches in data management, user interface and science data analysis and will serve as a prototype design for a wide range of applications

The communication processor of TUMULT-64

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Jansen, P.G.

1988-01-01

Tumult (Twente University MULTi-processor system) is a modular extendible multi-processor system designed and implemented at the Twente University of Technology in co-operation with Oce Nederland B.V. and the Dr. Neher Laboratories (Dutch PTT). Characteristics of the hardware are: MIMD type,

High-Speed General Purpose Genetic Algorithm Processor.

Science.gov (United States)

Hoseini Alinodehi, Seyed Pourya; Moshfe, Sajjad; Saber Zaeimian, Masoumeh; Khoei, Abdollah; Hadidi, Khairollah

2016-07-01

In this paper, an ultrafast steady-state genetic algorithm processor (GAP) is presented. Due to the heavy computational load of genetic algorithms (GAs), they usually take a long time to find optimum solutions. Hardware implementation is a significant approach to overcome the problem by speeding up the GAs procedure. Hence, we designed a digital CMOS implementation of GA in [Formula: see text] process. The proposed processor is not bounded to a specific application. Indeed, it is a general-purpose processor, which is capable of performing optimization in any possible application. Utilizing speed-boosting techniques, such as pipeline scheme, parallel coarse-grained processing, parallel fitness computation, parallel selection of parents, dual-population scheme, and support for pipelined fitness computation, the proposed processor significantly reduces the processing time. Furthermore, by relying on a built-in discard operator the proposed hardware may be used in constrained problems that are very common in control applications. In the proposed design, a large search space is achievable through the bit string length extension of individuals in the genetic population by connecting the 32-bit GAPs. In addition, the proposed processor supports parallel processing, in which the GAs procedure can be run on several connected processors simultaneously.

MAP3D: a media processor approach for high-end 3D graphics

Science.gov (United States)

Darsa, Lucia; Stadnicki, Steven; Basoglu, Chris

1999-12-01

Equator Technologies, Inc. has used a software-first approach to produce several programmable and advanced VLIW processor architectures that have the flexibility to run both traditional systems tasks and an array of media-rich applications. For example, Equator's MAP1000A is the world's fastest single-chip programmable signal and image processor targeted for digital consumer and office automation markets. The Equator MAP3D is a proposal for the architecture of the next generation of the Equator MAP family. The MAP3D is designed to achieve high-end 3D performance and a variety of customizable special effects by combining special graphics features with high performance floating-point and media processor architecture. As a programmable media processor, it offers the advantages of a completely configurable 3D pipeline--allowing developers to experiment with different algorithms and to tailor their pipeline to achieve the highest performance for a particular application. With the support of Equator's advanced C compiler and toolkit, MAP3D programs can be written in a high-level language. This allows the compiler to successfully find and exploit any parallelism in a programmer's code, thus decreasing the time to market of a given applications. The ability to run an operating system makes it possible to run concurrent applications in the MAP3D chip, such as video decoding while executing the 3D pipelines, so that integration of applications is easily achieved--using real-time decoded imagery for texturing 3D objects, for instance. This novel architecture enables an affordable, integrated solution for high performance 3D graphics.

Accuracies Of Optical Processors For Adaptive Optics

Science.gov (United States)

Downie, John D.; Goodman, Joseph W.

1992-01-01

Paper presents analysis of accuracies and requirements concerning accuracies of optical linear-algebra processors (OLAP's) in adaptive-optics imaging systems. Much faster than digital electronic processor and eliminate some residual distortion. Question whether errors introduced by analog processing of OLAP overcome advantage of greater speed. Paper addresses issue by presenting estimate of accuracy required in general OLAP that yields smaller average residual aberration of wave front than digital electronic processor computing at given speed.

Making CSB + -Trees Processor Conscious

DEFF Research Database (Denmark)

Samuel, Michael; Pedersen, Anders Uhl; Bonnet, Philippe

2005-01-01

of the CSB+-tree. We argue that it is necessary to consider a larger group of parameters in order to adapt CSB+-tree to processor architectures as different as Pentium and Itanium. We identify this group of parameters and study how it impacts the performance of CSB+-tree on Itanium 2. Finally, we propose......Cache-conscious indexes, such as CSB+-tree, are sensitive to the underlying processor architecture. In this paper, we focus on how to adapt the CSB+-tree so that it performs well on a range of different processor architectures. Previous work has focused on the impact of node size on the performance...... a systematic method for adapting CSB+-tree to new platforms. This work is a first step towards integrating CSB+-tree in MySQL’s heap storage manager....

Lipsi: Probably the Smallest Processor in the World

DEFF Research Database (Denmark)

Schoeberl, Martin

2018-01-01

While research on high-performance processors is important, it is also interesting to explore processor architectures at the other end of the spectrum: tiny processor cores for auxiliary functions. While it is common to implement small circuits for such functions, such as a serial port, in dedica...... at a minimal cost....

Recommending the heterogeneous cluster type multi-processor system computing

International Nuclear Information System (INIS)

Iijima, Nobukazu

2010-01-01

Real-time reactor simulator had been developed by reusing the equipment of the Musashi reactor and its performance improvement became indispensable for research tools to increase sampling rate with introduction of arithmetic units using multi-Digital Signal Processor(DSP) system (cluster). In order to realize the heterogeneous cluster type multi-processor system computing, combination of two kinds of Control Processor (CP) s, Cluster Control Processor (CCP) and System Control Processor (SCP), were proposed with Large System Control Processor (LSCP) for hierarchical cluster if needed. Faster computing performance of this system was well evaluated by simulation results for simultaneous execution of plural jobs and also pipeline processing between clusters, which showed the system led to effective use of existing system and enhancement of the cost performance. (T. Tanaka)

A digital signal processor based rf control system for the TRIUMF ISAC RFQ prototype

International Nuclear Information System (INIS)

Fong, K.; Fang, S.; Laverty, M.

1996-01-01

A stand alone digital signal processor is used to control the RFQ prototype in the TRIUMF ISAC development program. The advantage of a digital control system over the traditional analogue system is that it offers the higher degree of flexibility necessary for a development system. For this application the system is designed to have the outward appearance of an analogue system, and uses dials, knobs, and switches as the operator interface. The digital signal processor is used as a feedback controller during CW rf operation, with the feedback gain parameters continually adjustable. It is also able to perform the same regulation during pulsed operation, with additional feedforward compensation for initial pulse on duration. Using a low cost analogue-to-digital converter with a sample rate of 100 kHz, a regulation bandwidth of 10 kHz is achieved. (author)

First level trigger processor for the ZEUS calorimeter

International Nuclear Information System (INIS)

Dawson, J.W.; Talaga, R.L.; Burr, G.W.; Laird, R.J.; Smith, W.; Lackey, J.

1990-01-01

This paper discusses the design of the first level trigger processor for the ZEUS calorimeter. This processor accepts data from the 13,000 photomultipliers of the calorimeter which is topologically divided into 16 regions, and after regional preprocessing, performs logical and numerical operations which cross regional boundaries. Because the crossing period at the HERA collider is 96 ns, it is necessary that first-level trigger decisions be made in pipelined hardware. One microsecond is allowed for the processor to perform the required logical and numerical operations, during which time the data from ten crossings would be resident in the processor while being clocked through the pipelined hardware. The circuitry is implemented in 100K ECL, Advanced CMOS discrete devices, and programmable gate arrays, and operates in a VME environment. All tables and registers are written/read from VME, and all diagnostic codes are executed from VME. Preprocessed data flows into the processor at a rate of 5.2GB/s, and processed data flows from the processor to the Global First-Level Trigger at a rate of 700MB/s. The system allows for subsets of the logic to be configured by software and for various important variables to be histogrammed as they flow through the processor. 2 refs., 3 figs

First-level trigger processor for the ZEUS calorimeter

International Nuclear Information System (INIS)

Dawson, J.W.; Talaga, R.L.; Burr, G.W.; Laird, R.J.; Smith, W.; Lackey, J.

1990-01-01

The design of the first-level trigger processor for the Zeus calorimeter is discussed. This processor accepts data from the 13,000 photomultipliers of the calorimeter, which is topologically divided into 16 regions, and after regional preprocessing performs logical and numerical operations that cross regional boundaries. Because the crossing period at the HERA collider is 96 ns, it is necessary that first-level trigger decisions be made in pipelined hardware. One microsecond is allowed for the processor to perform the required logical and numerical operations, during which time the data from ten crossings would be resident in the processor while being clocked through the pipelined hardware. The circuitry is implemented in 100K emitter-coupled logic (ECL), advanced CMOS discrete devices and programmable gate arrays, and operates in a VME environment. All tables and registers are written/read from VME, and all diagnostic codes are executed from VME. Preprocessed data flows into the processor at a rate of 5.2 Gbyte/s, and processed data flows from the processor to the global first-level trigger at a rate of 70 Mbyte/s. The system allows for subsets of the logic to be configured by software and for various important variables to be histogrammed as they flow through the processor

A digital retina-like low-level vision processor.

Science.gov (United States)

Mertoguno, S; Bourbakis, N G

2003-01-01

This correspondence presents the basic design and the simulation of a low level multilayer vision processor that emulates to some degree the functional behavior of a human retina. This retina-like multilayer processor is the lower part of an autonomous self-organized vision system, called Kydon, that could be used on visually impaired people with a damaged visual cerebral cortex. The Kydon vision system, however, is not presented in this paper. The retina-like processor consists of four major layers, where each of them is an array processor based on hexagonal, autonomous processing elements that perform a certain set of low level vision tasks, such as smoothing and light adaptation, edge detection, segmentation, line recognition and region-graph generation. At each layer, the array processor is a 2D array of k/spl times/m hexagonal identical autonomous cells that simultaneously execute certain low level vision tasks. Thus, the hardware design and the simulation at the transistor level of the processing elements (PEs) of the retina-like processor and its simulated functionality with illustrative examples are provided in this paper.

Investigating the effectiveness of many-core network processors for high performance cyber protection systems. Part I, FY2011.

Energy Technology Data Exchange (ETDEWEB)

Wheeler, Kyle Bruce; Naegle, John Hunt; Wright, Brian J.; Benner, Robert E., Jr.; Shelburg, Jeffrey Scott; Pearson, David Benjamin; Johnson, Joshua Alan; Onunkwo, Uzoma A.; Zage, David John; Patel, Jay S.

2011-09-01

This report documents our first year efforts to address the use of many-core processors for high performance cyber protection. As the demands grow for higher bandwidth (beyond 1 Gbits/sec) on network connections, the need to provide faster and more efficient solution to cyber security grows. Fortunately, in recent years, the development of many-core network processors have seen increased interest. Prior working experiences with many-core processors have led us to investigate its effectiveness for cyber protection tools, with particular emphasis on high performance firewalls. Although advanced algorithms for smarter cyber protection of high-speed network traffic are being developed, these advanced analysis techniques require significantly more computational capabilities than static techniques. Moreover, many locations where cyber protections are deployed have limited power, space and cooling resources. This makes the use of traditionally large computing systems impractical for the front-end systems that process large network streams; hence, the drive for this study which could potentially yield a highly reconfigurable and rapidly scalable solution.

Median and Morphological Specialized Processors for a Real-Time Image Data Processing

Directory of Open Access Journals (Sweden)

Kazimierz Wiatr

2002-01-01

Full Text Available This paper presents the considerations on selecting a multiprocessor MISD architecture for fast implementation of the vision image processing. Using the author′s earlier experience with real-time systems, implementing of specialized hardware processors based on the programmable FPGA systems has been proposed in the pipeline architecture. In particular, the following processors are presented: median filter and morphological processor. The structure of a universal reconfigurable processor developed has been proposed as well. Experimental results are presented as delays on LCA level implementation for median filter, morphological processor, convolution processor, look-up-table processor, logic processor and histogram processor. These times compare with delays in general purpose processor and DSP processor.

Java Processor Optimized for RTSJ

Directory of Open Access Journals (Sweden)

Tu Shiliang

2007-01-01

Full Text Available Due to the preeminent work of the real-time specification for Java (RTSJ, Java is increasingly expected to become the leading programming language in real-time systems. To provide a Java platform suitable for real-time applications, a Java processor which can execute Java bytecode is directly proposed in this paper. It provides efficient support in hardware for some mechanisms specified in the RTSJ and offers a simpler programming model through ameliorating the scoped memory of the RTSJ. The worst case execution time (WCET of the bytecodes implemented in this processor is predictable by employing the optimization method proposed in our previous work, in which all the processing interfering predictability is handled before bytecode execution. Further advantage of this method is to make the implementation of the processor simpler and suited to a low-cost FPGA chip.

Data collection from FASTBUS to a DEC UNIBUS processor through the UNIBUS-Processor Interface

International Nuclear Information System (INIS)

Larwill, M.; Barsotti, E.; Lesny, D.; Pordes, R.

1983-01-01

This paper describes the use of the UNIBUS Processor Interface, an interface between FASTBUS and the Digital Equipment Corporation UNIBUS. The UPI was developed by Fermilab and the University of Illinois. Details of the use of this interface in a high energy physics experiment at Fermilab are given. The paper includes a discussion of the operation of the UPI on the UNIBUS of a VAX-11, and plans for using the UPI to perform data acquisition from FASTBUS to a VAX-11 Processor

New development for low energy electron beam processor

International Nuclear Information System (INIS)

Takei, Taro; Goto, Hitoshi; Oizumi, Matsutoshi; Hirakawa, Tetsuya; Ochi, Masafumi

2003-01-01

Newly developed low-energy electron beam (EB) processors that have unique designs and configurations compared to conventional ones enable electron-beam treatment of small three-dimensional objects, such as grain-like agricultural products and small plastic parts. As the EB processor can irradiate the products from the whole angles, the uniform EB treatment can be achieved at one time regardless the complex shapes of the product. Here presented are two new EB processors: the first system has cylindrical process zone, which allows three-dimensional objects to be irradiated with one-pass treatment. The second is a tube-type small EB processor, achieving not only its compactor design, but also higher beam extraction efficiency and flexible installation of the irradiation heads. The basic design of each processor and potential applications with them will be presented in this paper. (author)

On the incidence of meteorological and hydrological processors: Effect of resolution, sharpness and reliability of hydrological ensemble forecasts

Science.gov (United States)

Abaza, Mabrouk; Anctil, François; Fortin, Vincent; Perreault, Luc

2017-12-01

Meteorological and hydrological ensemble prediction systems are imperfect. Their outputs could often be improved through the use of a statistical processor, opening up the question of the necessity of using both processors (meteorological and hydrological), only one of them, or none. This experiment compares the predictive distributions from four hydrological ensemble prediction systems (H-EPS) utilising the Ensemble Kalman filter (EnKF) probabilistic sequential data assimilation scheme. They differ in the inclusion or not of the Distribution Based Scaling (DBS) method for post-processing meteorological forecasts and the ensemble Bayesian Model Averaging (ensemble BMA) method for hydrological forecast post-processing. The experiment is implemented on three large watersheds and relies on the combination of two meteorological reforecast products: the 4-member Canadian reforecasts from the Canadian Centre for Meteorological and Environmental Prediction (CCMEP) and the 10-member American reforecasts from the National Oceanic and Atmospheric Administration (NOAA), leading to 14 members at each time step. Results show that all four tested H-EPS lead to resolution and sharpness values that are quite similar, with an advantage to DBS + EnKF. The ensemble BMA is unable to compensate for any bias left in the precipitation ensemble forecasts. On the other hand, it succeeds in calibrating ensemble members that are otherwise under-dispersed. If reliability is preferred over resolution and sharpness, DBS + EnKF + ensemble BMA performs best, making use of both processors in the H-EPS system. Conversely, for enhanced resolution and sharpness, DBS is the preferred method.

Sequential decision reliability concept and failure rate assessment

International Nuclear Information System (INIS)

Ciftcioglu, O.

1990-11-01

Conventionally, a reliability concept is considered together with both each basic unit and their integration in a complicated large scale system such as a nuclear power plant (NPP). Basically, as the plant's operational status is determined by the information obtained from various sensors, the plant's reliability and the risk assessment is closely related to the reliability of the sensory information and hence the sensor components. However, considering the relevant information-processing systems, e.g. fault detection processors, there exists a further question about the reliability of such systems, specifically the reliability of the systems' decision-based outcomes by means of which the further actions are performed. To this end, a general sequential decision reliability concept and the failure rate assessment methodology is introduced. The implications of the methodology are investigated and the importance of the decision reliability concept in system operation is demonstrated by means of sensory signals in real-time from the Borssele NPP in the Netherlands. (author). 21 refs.; 8 figs

A data base processor semantics specification package

Science.gov (United States)

Fishwick, P. A.

1983-01-01

A Semantics Specification Package (DBPSSP) for the Intel Data Base Processor (DBP) is defined. DBPSSP serves as a collection of cross assembly tools that allow the analyst to assemble request blocks on the host computer for passage to the DBP. The assembly tools discussed in this report may be effectively used in conjunction with a DBP compatible data communications protocol to form a query processor, precompiler, or file management system for the database processor. The source modules representing the components of DBPSSP are fully commented and included.

XL-100S microprogrammable processor

International Nuclear Information System (INIS)

Gorbunov, N.V.; Guzik, Z.; Sutulin, V.A.; Forytski, A.

1983-01-01

The XL-100S microprogrammable processor providing the multiprocessor operation mode in the XL system crate is described. The processor meets the EUR 6500 CAMAC standards, address up to 4 Mbyte memory, and interacts with 7 CAMAC branchas. Eight external requests initiate operations preset by a sequence of microcommands in a memory of the capacity up to 64 kwords of 32-Git. The microprocessor architecture allows one to emulate commands of the majority of mini- or micro-computers, including floating point operations. The XL-100S processor may be used in various branches of experimental physics: for physical experiment apparatus control, fast selection of useful physical events, organization of the of input/output operations, organization of direct assess to memory included, etc. The Am2900 microprocessor set is used as an elementary base. The device is made in the form of a single width CAMAC module

Acoustooptic linear algebra processors - Architectures, algorithms, and applications

Science.gov (United States)

Casasent, D.

1984-01-01

Architectures, algorithms, and applications for systolic processors are described with attention to the realization of parallel algorithms on various optical systolic array processors. Systolic processors for matrices with special structure and matrices of general structure, and the realization of matrix-vector, matrix-matrix, and triple-matrix products and such architectures are described. Parallel algorithms for direct and indirect solutions to systems of linear algebraic equations and their implementation on optical systolic processors are detailed with attention to the pipelining and flow of data and operations. Parallel algorithms and their optical realization for LU and QR matrix decomposition are specifically detailed. These represent the fundamental operations necessary in the implementation of least squares, eigenvalue, and SVD solutions. Specific applications (e.g., the solution of partial differential equations, adaptive noise cancellation, and optimal control) are described to typify the use of matrix processors in modern advanced signal processing.

Simulation of a processor switching circuit with APLSV

International Nuclear Information System (INIS)

Dilcher, H.

1979-01-01

The report describes the simulation of a processor switching circuit with APL. Furthermore an APL function is represented to simulate a processor in an assembly like language. Both together serve as a tool for studying processor properties. By means of the programming function it is also possible to program other simulated processors. The processor is to be used in the processing of data in real time analysis that occur in high energy physics experiments. The data are already offered to the computer in digitalized form. A typical data rate is at 10 KB/ sec. The data are structured in blocks. The particular blocks are 1 KB wide and are independent from each other. Aprocessor has to decide, whether the block data belong to an event that is part of the backround noise and can therefore be forgotten, or whether the data should be saved for a later evaluation. (orig./WB) [de

Accuracy Limitations in Optical Linear Algebra Processors

Science.gov (United States)

Batsell, Stephen Gordon

1990-01-01

One of the limiting factors in applying optical linear algebra processors (OLAPs) to real-world problems has been the poor achievable accuracy of these processors. Little previous research has been done on determining noise sources from a systems perspective which would include noise generated in the multiplication and addition operations, noise from spatial variations across arrays, and from crosstalk. In this dissertation, we propose a second-order statistical model for an OLAP which incorporates all these system noise sources. We now apply this knowledge to determining upper and lower bounds on the achievable accuracy. This is accomplished by first translating the standard definition of accuracy used in electronic digital processors to analog optical processors. We then employ our second-order statistical model. Having determined a general accuracy equation, we consider limiting cases such as for ideal and noisy components. From the ideal case, we find the fundamental limitations on improving analog processor accuracy. From the noisy case, we determine the practical limitations based on both device and system noise sources. These bounds allow system trade-offs to be made both in the choice of architecture and in individual components in such a way as to maximize the accuracy of the processor. Finally, by determining the fundamental limitations, we show the system engineer when the accuracy desired can be achieved from hardware or architecture improvements and when it must come from signal pre-processing and/or post-processing techniques.

The Heidelberg POLYP - a flexible and fault-tolerant poly-processor

International Nuclear Information System (INIS)

Maenner, R.; Deluigi, B.

1981-01-01

The Heidelberg poly-processor system POLYP is described. It is intended to be used in nuclear physics for reprocessing of experimental data, in high energy physics as second-stage trigger processor, and generally in other applications requiring high-computing power. The POLYP system consists of any number of I/O-processors, processor modules (eventually of different types), global memory segments, and a host processor. All modules (up to several hundred) are connected by a multiple common-data-bus system; all processors, additionally, by a multiple sync bus system for processor/task-scheduling. All hard- and software is designed to be decentralized and free of bottle-necks. Most hardware-faults like single-bit errors in memory or multi-bit errors during transfers are automatically corrected. Defective modules, buses, etc., can be removed with only a graceful degradation of the system-throughput. (orig.)

A dedicated line-processor as used at the SHF

International Nuclear Information System (INIS)

Bevan, A.V.; Hatley, R.W.; Price, D.R.; Rankin, P.

1985-01-01

A hardwired trigger processor was used at the SLAC Hybrid Facility to find evidence for charged tracks originating from the fiducial volume of a 40'' rapidcycling bubble chamber. Straight-line projections of these tracks in the plane perpendicular to the applied magnetic field were searched for using data from three sets of proportional wire chambers (PWC). This information was made directly available to the processor by means of a special digitizing card. The results memory of the processor simulated read-only memory in a 168/E processor and was accessible by it. The 168/E controlled the issuing of a trigger command to the bubble chamber flash tubes. The same design of digitizer card used by the line processor was incorporated into the 168/E, again as read only memory, which allowed it access to the raw data for continual monitoring of trigger integrity. The design logic of the trigger processor was verified by running real PWC data through a FORTRAN simulation of the hardware. This enabled the debugging to become highly automated since a step by step, computer controlled comparison of processor registers to simulation predictions could be made

Embedded processor extensions for image processing

Science.gov (United States)

Thevenin, Mathieu; Paindavoine, Michel; Letellier, Laurent; Heyrman, Barthélémy

2008-04-01

The advent of camera phones marks a new phase in embedded camera sales. By late 2009, the total number of camera phones will exceed that of both conventional and digital cameras shipped since the invention of photography. Use in mobile phones of applications like visiophony, matrix code readers and biometrics requires a high degree of component flexibility that image processors (IPs) have not, to date, been able to provide. For all these reasons, programmable processor solutions have become essential. This paper presents several techniques geared to speeding up image processors. It demonstrates that a gain of twice is possible for the complete image acquisition chain and the enhancement pipeline downstream of the video sensor. Such results confirm the potential of these computing systems for supporting future applications.

Sojourn time tails in processor-sharing systems

NARCIS (Netherlands)

Egorova, R.R.

2009-01-01

The processor-sharing discipline was originally introduced as a modeling abstraction for the design and performance analysis of the processing unit of a computer system. Under the processor-sharing discipline, all active tasks are assumed to be processed simultaneously, receiving an equal share of

An interactive parallel processor for data analysis

International Nuclear Information System (INIS)

Mong, J.; Logan, D.; Maples, C.; Rathbun, W.; Weaver, D.

1984-01-01

A parallel array of eight minicomputers has been assembled in an attempt to deal with kiloparameter data events. By exporting computer system functions to a separate processor, the authors have been able to achieve computer amplification linearly proportional to the number of executing processors

Optical Array Processor: Laboratory Results

Science.gov (United States)

Casasent, David; Jackson, James; Vaerewyck, Gerard

1987-01-01

A Space Integrating (SI) Optical Linear Algebra Processor (OLAP) is described and laboratory results on its performance in several practical engineering problems are presented. The applications include its use in the solution of a nonlinear matrix equation for optimal control and a parabolic Partial Differential Equation (PDE), the transient diffusion equation with two spatial variables. Frequency-multiplexed, analog and high accuracy non-base-two data encoding are used and discussed. A multi-processor OLAP architecture is described and partitioning and data flow issues are addressed.

Multiprocessor Real-Time Scheduling with Hierarchical Processor Affinities

OpenAIRE

Bonifaci , Vincenzo; Brandenburg , Björn; D'Angelo , Gianlorenzo; Marchetti-Spaccamela , Alberto

2016-01-01

International audience; Many multiprocessor real-time operating systems offer the possibility to restrict the migrations of any task to a specified subset of processors by setting affinity masks. A notion of " strong arbitrary processor affinity scheduling " (strong APA scheduling) has been proposed; this notion avoids schedulability losses due to overly simple implementations of processor affinities. Due to potential overheads, strong APA has not been implemented so far in a real-time operat...

Hardware trigger processor for the MDT system

CERN Document Server

AUTHOR|(SzGeCERN)757787; The ATLAS collaboration; Hazen, Eric; Butler, John; Black, Kevin; Gastler, Daniel Edward; Ntekas, Konstantinos; Taffard, Anyes; Martinez Outschoorn, Verena; Ishino, Masaya; Okumura, Yasuyuki

2017-01-01

We are developing a low-latency hardware trigger processor for the Monitored Drift Tube system in the Muon spectrometer. The processor will fit candidate Muon tracks in the drift tubes in real time, improving significantly the momentum resolution provided by the dedicated trigger chambers. We present a novel pure-FPGA implementation of a Legendre transform segment finder, an associative-memory alternative implementation, an ARM (Zynq) processor-based track fitter, and compact ATCA carrier board architecture. The ATCA architecture is designed to allow a modular, staged approach to deployment of the system and exploration of alternative technologies.

Design of an Elliptic Curve Cryptography processor for RFID tag chips.

Science.gov (United States)

Liu, Zilong; Liu, Dongsheng; Zou, Xuecheng; Lin, Hui; Cheng, Jian

2014-09-26

Radio Frequency Identification (RFID) is an important technique for wireless sensor networks and the Internet of Things. Recently, considerable research has been performed in the combination of public key cryptography and RFID. In this paper, an efficient architecture of Elliptic Curve Cryptography (ECC) Processor for RFID tag chip is presented. We adopt a new inversion algorithm which requires fewer registers to store variables than the traditional schemes. A new method for coordinate swapping is proposed, which can reduce the complexity of the controller and shorten the time of iterative calculation effectively. A modified circular shift register architecture is presented in this paper, which is an effective way to reduce the area of register files. Clock gating and asynchronous counter are exploited to reduce the power consumption. The simulation and synthesis results show that the time needed for one elliptic curve scalar point multiplication over GF(2163) is 176.7 K clock cycles and the gate area is 13.8 K with UMC 0.13 μm Complementary Metal Oxide Semiconductor (CMOS) technology. Moreover, the low power and low cost consumption make the Elliptic Curve Cryptography Processor (ECP) a prospective candidate for application in the RFID tag chip.

Towards a Process Algebra for Shared Processors

DEFF Research Database (Denmark)

Buchholtz, Mikael; Andersen, Jacob; Løvengreen, Hans Henrik

2002-01-01

We present initial work on a timed process algebra that models sharing of processor resources allowing preemption at arbitrary points in time. This enables us to model both the functional and the timely behaviour of concurrent processes executed on a single processor. We give a refinement relation...

High-speed packet filtering utilizing stream processors

Science.gov (United States)

Hummel, Richard J.; Fulp, Errin W.

2009-04-01

Parallel firewalls offer a scalable architecture for the next generation of high-speed networks. While these parallel systems can be implemented using multiple firewalls, the latest generation of stream processors can provide similar benefits with a significantly reduced latency due to locality. This paper describes how the Cell Broadband Engine (CBE), a popular stream processor, can be used as a high-speed packet filter. Results show the CBE can potentially process packets arriving at a rate of 1 Gbps with a latency less than 82 μ-seconds. Performance depends on how well the packet filtering process is translated to the unique stream processor architecture. For example the method used for transmitting data and control messages among the pseudo-independent processor cores has a significant impact on performance. Experimental results will also show the current limitations of a CBE operating system when used to process packets. Possible solutions to these issues will be discussed.

Upside to downsizing : Acceleware's graphic processor technology propels seismic data processing revolution

Energy Technology Data Exchange (ETDEWEB)

Smith, M.

2009-11-15

Accelware has developed a graphic processor technology (GPU) that is transforming the petroleum industry. The benefits of the technology are its small-footprint, low-wattage, and high speed. The software brings supercomputing speed to the desktop by leveraging the massive parallel processing capacity to the very latest in GPU technology. This article discussed the GPU technology and its emergence as a powerful supercomputing tool. Accelware's partnering with California-based NVIDIA was also outlined. The advantages of the technology were also discussed including its smaller footprint. Accelware's hardware takes up a fraction of the space and uses up to 70 per cent less power than a traditional central processing unit. By combining Accelware's core knowledge in making complex algorithms run in parallel with an in-house team of seismic industry experts, the company provides software solutions for seismic data processors that access the massively parallel processing capabilities of GPUs. 1 fig.

Fast processor for dilepton triggers

International Nuclear Information System (INIS)

Katsanevas, S.; Kostarakis, P.; Baltrusaitis, R.

1983-01-01

We describe a fast trigger processor, developed for and used in Fermilab experiment E-537, for selecting high-mass dimuon events produced by negative pions and anti-protons. The processor finds candidate tracks by matching hit information received from drift chambers and scintillation counters, and determines their momenta. Invariant masses are calculated for all possible pairs of tracks and an event is accepted if any invariant mass is greater than some preselectable minimum mass. The whole process, accomplished within 5 to 10 microseconds, achieves up to a ten-fold reduction in trigger rate

Computing trends using graphic processor in high energy physics

CERN Document Server

Niculescu, Mihai

2011-01-01

One of the main challenges in Heavy Energy Physics is to make fast analysis of high amount of experimental and simulated data. At LHC-CERN one p-p event is approximate 1 Mb in size. The time taken to analyze the data and obtain fast results depends on high computational power. The main advantage of using GPU(Graphic Processor Unit) programming over traditional CPU one is that graphical cards bring a lot of computing power at a very low price. Today a huge number of application(scientific, financial etc) began to be ported or developed for GPU, including Monte Carlo tools or data analysis tools for High Energy Physics. In this paper, we'll present current status and trends in HEP using GPU.

Design of RISC Processor Using VHDL and Cadence

Science.gov (United States)

Moslehpour, Saeid; Puliroju, Chandrasekhar; Abu-Aisheh, Akram

The project deals about development of a basic RISC processor. The processor is designed with basic architecture consisting of internal modules like clock generator, memory, program counter, instruction register, accumulator, arithmetic and logic unit and decoder. This processor is mainly used for simple general purpose like arithmetic operations and which can be further developed for general purpose processor by increasing the size of the instruction register. The processor is designed in VHDL by using Xilinx 8.1i version. The present project also serves as an application of the knowledge gained from past studies of the PSPICE program. The study will show how PSPICE can be used to simplify massive complex circuits designed in VHDL Synthesis. The purpose of the project is to explore the designed RISC model piece by piece, examine and understand the Input/ Output pins, and to show how the VHDL synthesis code can be converted to a simplified PSPICE model. The project will also serve as a collection of various research materials about the pieces of the circuit.

Safeguarding a Lunar Rover with Wald's Sequential Probability Ratio Test

Science.gov (United States)

Furlong, Michael; Dille, Michael; Wong, Uland; Nefian, Ara

2016-01-01

The virtual bumper is a safeguarding mechanism for autonomous and remotely operated robots. In this paper we take a new approach to the virtual bumper system by using an old statistical test. By using a modified version of Wald's sequential probability ratio test we demonstrate that we can reduce the number of false positive reported by the virtual bumper, thereby saving valuable mission time. We use the concept of sequential probability ratio to control vehicle speed in the presence of possible obstacles in order to increase certainty about whether or not obstacles are present. Our new algorithm reduces the chances of collision by approximately 98 relative to traditional virtual bumper safeguarding without speed control.

Real time processor for array speckle interferometry

Science.gov (United States)

Chin, Gordon; Florez, Jose; Borelli, Renan; Fong, Wai; Miko, Joseph; Trujillo, Carlos

1989-02-01

The authors are constructing a real-time processor to acquire image frames, perform array flat-fielding, execute a 64 x 64 element two-dimensional complex FFT (fast Fourier transform) and average the power spectrum, all within the 25 ms coherence time for speckles at near-IR (infrared) wavelength. The processor will be a compact unit controlled by a PC with real-time display and data storage capability. This will provide the ability to optimize observations and obtain results on the telescope rather than waiting several weeks before the data can be analyzed and viewed with offline methods. The image acquisition and processing, design criteria, and processor architecture are described.

Vector and parallel processors in computational science

International Nuclear Information System (INIS)

Duff, I.S.; Reid, J.K.

1985-01-01

These proceedings contain the articles presented at the named conference. These concern hardware and software for vector and parallel processors, numerical methods and algorithms for the computation on such processors, as well as applications of such methods to different fields of physics and related sciences. See hints under the relevant topics. (HSI)

Monte Carlo Tree Search for Continuous and Stochastic Sequential Decision Making Problems

International Nuclear Information System (INIS)

Couetoux, Adrien

2013-01-01

In this thesis, I studied sequential decision making problems, with a focus on the unit commitment problem. Traditionally solved by dynamic programming methods, this problem is still a challenge, due to its high dimension and to the sacrifices made on the accuracy of the model to apply state of the art methods. I investigated on the applicability of Monte Carlo Tree Search methods for this problem, and other problems that are single player, stochastic and continuous sequential decision making problems. In doing so, I obtained a consistent and anytime algorithm, that can easily be combined with existing strong heuristic solvers. (author)

Air-Lubricated Thermal Processor For Dry Silver Film

Science.gov (United States)

Siryj, B. W.

1980-09-01

Since dry silver film is processed by heat, it may be viewed on a light table only seconds after exposure. On the other hand, wet films require both bulky chemicals and substantial time before an image can be analyzed. Processing of dry silver film, although simple in concept, is not so simple when reduced to practice. The main concern is the effect of film temperature gradients on uniformity of optical film density. RCA has developed two thermal processors, different in implementation but based on the same philosophy. Pressurized air is directed to both sides of the film to support the film and to conduct the heat to the film. Porous graphite is used as the medium through which heat and air are introduced. The initial thermal processor was designed to process 9.5-inch-wide film moving at speeds ranging from 0.0034 to 0.008 inch per second. The processor configuration was curved to match the plane generated by the laser recording beam. The second thermal processor was configured to process 5-inch-wide film moving at a continuously variable rate ranging from 0.15 to 3.5 inches per second. Due to field flattening optics used in this laser recorder, the required film processing area was plane. In addition, this processor was sectioned in the direction of film motion, giving the processor the capability of varying both temperature and effective processing area.

Logistic Fuel Processor Development

National Research Council Canada - National Science Library

Salavani, Reza

2004-01-01

The Air Base Technologies Division of the Air Force Research Laboratory has developed a logistic fuel processor that removes the sulfur content of the fuel and in the process converts logistic fuel...

A Bayesian sequential design using alpha spending function to control type I error.

Science.gov (United States)

Zhu, Han; Yu, Qingzhao

2017-10-01

We propose in this article a Bayesian sequential design using alpha spending functions to control the overall type I error in phase III clinical trials. We provide algorithms to calculate critical values, power, and sample sizes for the proposed design. Sensitivity analysis is implemented to check the effects from different prior distributions, and conservative priors are recommended. We compare the power and actual sample sizes of the proposed Bayesian sequential design with different alpha spending functions through simulations. We also compare the power of the proposed method with frequentist sequential design using the same alpha spending function. Simulations show that, at the same sample size, the proposed method provides larger power than the corresponding frequentist sequential design. It also has larger power than traditional Bayesian sequential design which sets equal critical values for all interim analyses. When compared with other alpha spending functions, O'Brien-Fleming alpha spending function has the largest power and is the most conservative in terms that at the same sample size, the null hypothesis is the least likely to be rejected at early stage of clinical trials. And finally, we show that adding a step of stop for futility in the Bayesian sequential design can reduce the overall type I error and reduce the actual sample sizes.

Real time monitoring of electron processors

International Nuclear Information System (INIS)

Nablo, S.V.; Kneeland, D.R.; McLaughlin, W.L.

1995-01-01

A real time radiation monitor (RTRM) has been developed for monitoring the dose rate (current density) of electron beam processors. The system provides continuous monitoring of processor output, electron beam uniformity, and an independent measure of operating voltage or electron energy. In view of the device's ability to replace labor-intensive dosimetry in verification of machine performance on a real-time basis, its application to providing archival performance data for in-line processing is discussed. (author)

Fast track trigger processor for the OPAL detector at LEP

Energy Technology Data Exchange (ETDEWEB)

Carter, A A; Carter, J R; Ward, D R; Heuer, R D; Jaroslawski, S; Wagner, A

1986-09-20

A fast hardware track trigger processor being built for the OPAL experiment is described. The processor will analyse data from the central drift chambers of OPAL to determine whether any tracks come from the interaction region, and thereby eliminate background events. The processor will find tracks over a large angular range, vertical strokecos thetavertical stroke < or approx. 0.95. The design of the processor is described, together with a brief account of its hardware implementation for OPAL. The results of feasibility studies are also presented.

Multi-processor data acquisition and monitoring systems for particle physics

International Nuclear Information System (INIS)

White, V.; Burch, B.; Eng, K.; Heinicke, P.; Pyatetsky, M.; Ritchie, D.

1983-01-01

A high speed distributed processing system, using PDP-11 and VAX processors, is being developed at Fermilab. The acquisition of data is done using one or more PDP-11s. Additional processors are connected to provide either data logging or extra data analysis capabilities. Within this framework, functional interchangeability of PDP-11 and VAX processors and of the PDP-11 operating systems, RT-11 and RSX-11M, has been maintained. Inter-processor connections have been implemented in a general way using the 5 megabit DR11-W hardware currently selected for the purpose. Using this approach the authors have been able to make use of several existing data acquisition and analysis packages, such as RT/MULTI, in a multi-processor system

Sequential and Simultaneous Processing in Children with Learning Disabilities: An Attempted Replication.

Science.gov (United States)

Bain, Sherry K.

1993-01-01

Analysis of Kaufman Assessment Battery for Children (K-ABC) Sequential and Simultaneous Processing scores of 94 children (ages 6-12) with learning disabilities produced factor patterns generally supportive of the traditional K-ABC Mental Processing structure with the exception of Spatial Memory. The sample exhibited relative processing strengths…

Optical backplane interconnect switch for data processors and computers

Science.gov (United States)

Hendricks, Herbert D.; Benz, Harry F.; Hammer, Jacob M.

1989-01-01

An optoelectronic integrated device design is reported which can be used to implement an all-optical backplane interconnect switch. The switch is sized to accommodate an array of processors and memories suitable for direct replacement into the basic avionic multiprocessor backplane. The optical backplane interconnect switch is also suitable for direct replacement of the PI bus traffic switch and at the same time, suitable for supporting pipelining of the processor and memory. The 32 bidirectional switchable interconnects are configured with broadcast capability for controls, reconfiguration, and messages. The approach described here can handle a serial interconnection of data processors or a line-to-link interconnection of data processors. An optical fiber demonstration of this approach is presented.

Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor/System-on-a-Chip

Science.gov (United States)

Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

2015-01-01

Hardness assurance test results of Intel state-of-the-art 14nm “Broadwell” U-series processor / System-on-a-Chip (SoC) for total ionizing dose (TID) are presented, along with exploratory results from trials at a medical proton facility. Test method builds upon previous efforts [1] by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor - System-on-a-Chip

Science.gov (United States)

Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

2015-01-01

Hardness assurance test results of Intel state-of-the-art 14nm Broadwell U-series processor System-on-a-Chip (SoC) for total dose are presented, along with first-look exploratory results from trials at a medical proton facility. Test method builds upon previous efforts by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

Fast digital processor for event selection according to particle number difference

International Nuclear Information System (INIS)

Basiladze, S.G.; Gus'kov, B.N.; Li Van Sun; Maksimov, A.N.; Parfenov, A.N.

1978-01-01

A fast digital processor for a magnetic spectrometer is described. It is used in experimental searches for charmed particles. The basic purpose of the processor is discriminating events in the difference of numbers of particles passing through two proportional chambers (PC). The processor consists of three units for detecting signals with PC, and a binary coder. The number of inputs of the processor is 32 for the first PC and 64 for the second. The difference in the number of particles discriminated is from 0 to 8. The resolution time is 180 ns. The processor is built in the CAMAC standard

Logistic Fuel Processor Development

National Research Council Canada - National Science Library

Salavani, Reza

2004-01-01

... to light gases then steam reform the light gases into hydrogen rich stream. This report documents the efforts in developing a fuel processor capable of providing hydrogen to a 3kW fuel cell stack...

APRON: A Cellular Processor Array Simulation and Hardware Design Tool

Science.gov (United States)

Barr, David R. W.; Dudek, Piotr

2009-12-01

We present a software environment for the efficient simulation of cellular processor arrays (CPAs). This software (APRON) is used to explore algorithms that are designed for massively parallel fine-grained processor arrays, topographic multilayer neural networks, vision chips with SIMD processor arrays, and related architectures. The software uses a highly optimised core combined with a flexible compiler to provide the user with tools for the design of new processor array hardware architectures and the emulation of existing devices. We present performance benchmarks for the software processor array implemented on standard commodity microprocessors. APRON can be configured to use additional processing hardware if necessary and can be used as a complete graphical user interface and development environment for new or existing CPA systems, allowing more users to develop algorithms for CPA systems.

APRON: A Cellular Processor Array Simulation and Hardware Design Tool

Directory of Open Access Journals (Sweden)

David R. W. Barr

2009-01-01

Full Text Available We present a software environment for the efficient simulation of cellular processor arrays (CPAs. This software (APRON is used to explore algorithms that are designed for massively parallel fine-grained processor arrays, topographic multilayer neural networks, vision chips with SIMD processor arrays, and related architectures. The software uses a highly optimised core combined with a flexible compiler to provide the user with tools for the design of new processor array hardware architectures and the emulation of existing devices. We present performance benchmarks for the software processor array implemented on standard commodity microprocessors. APRON can be configured to use additional processing hardware if necessary and can be used as a complete graphical user interface and development environment for new or existing CPA systems, allowing more users to develop algorithms for CPA systems.

Inhibition study of alanine aminotransferase enzyme using sequential online capillary electrophoresis analysis.

Science.gov (United States)

Liu, Lina; Chen, Yuanfang; Yang, Li

2014-12-15

We report the study of several inhibitors on alanine aminotransferase (ALT) enzyme using sequential online capillary electrophoresis (CE) assay. Using metal ions (Na(+) and Mg(2+)) as example inhibitors, we show that evolution of the ALT inhibition reaction can be achieved by automatically and simultaneously monitoring the substrate consumption and product formation as a function of reaction time. The inhibition mechanism and kinetic constants of ALT inhibition with succinic acid and two traditional Chinese medicines were derived from the sequential online CE assay. Our study could provide valuable information about the inhibition reactions of ALT enzyme. Copyright © 2014 Elsevier Inc. All rights reserved.

Accuracy requirements of optical linear algebra processors in adaptive optics imaging systems

Science.gov (United States)

Downie, John D.; Goodman, Joseph W.

1989-10-01

The accuracy requirements of optical processors in adaptive optics systems are determined by estimating the required accuracy in a general optical linear algebra processor (OLAP) that results in a smaller average residual aberration than that achieved with a conventional electronic digital processor with some specific computation speed. Special attention is given to an error analysis of a general OLAP with regard to the residual aberration that is created in an adaptive mirror system by the inaccuracies of the processor, and to the effect of computational speed of an electronic processor on the correction. Results are presented on the ability of an OLAP to compete with a digital processor in various situations.

High performance graphics processors for medical imaging applications

International Nuclear Information System (INIS)

Goldwasser, S.M.; Reynolds, R.A.; Talton, D.A.; Walsh, E.S.

1989-01-01

This paper describes a family of high- performance graphics processors with special hardware for interactive visualization of 3D human anatomy. The basic architecture expands to multiple parallel processors, each processor using pipelined arithmetic and logical units for high-speed rendering of Computed Tomography (CT), Magnetic Resonance (MR) and Positron Emission Tomography (PET) data. User-selectable display alternatives include multiple 2D axial slices, reformatted images in sagittal or coronal planes and shaded 3D views. Special facilities support applications requiring color-coded display of multiple datasets (such as radiation therapy planning), or dynamic replay of time- varying volumetric data (such as cine-CT or gated MR studies of the beating heart). The current implementation is a single processor system which generates reformatted images in true real time (30 frames per second), and shaded 3D views in a few seconds per frame. It accepts full scale medical datasets in their native formats, so that minimal preprocessing delay exists between data acquisition and display

Evaluation of the Intel Westmere-EP server processor

CERN Document Server

Jarp, S; Leduc, J; Nowak, A; CERN. Geneva. IT Department

2010-01-01

In this paper we report on a set of benchmark results recently obtained by CERN openlab when comparing the 6-core “Westmere-EP” processor with Intel’s previous generation of the same microarchitecture, the “Nehalem-EP”. The former is produced in a new 32nm process, the latter in 45nm. Both platforms are dual-socket servers. Multiple benchmarks were used to get a good understanding of the performance of the new processor. We used both industry-standard benchmarks, such as SPEC2006, and specific High Energy Physics benchmarks, representing both simulation of physics detectors and data analysis of physics events. Before summarizing the results we must stress the fact that benchmarking of modern processors is a very complex affair. One has to control (at least) the following features: processor frequency, overclocking via Turbo mode, the number of physical cores in use, the use of logical cores via Simultaneous Multi-Threading (SMT), the cache sizes available, the memory configuration installed, as well...

Keystone Business Models for Network Security Processors

OpenAIRE

Arthur Low; Steven Muegge

2013-01-01

Network security processors are critical components of high-performance systems built for cybersecurity. Development of a network security processor requires multi-domain experience in semiconductors and complex software security applications, and multiple iterations of both software and hardware implementations. Limited by the business models in use today, such an arduous task can be undertaken only by large incumbent companies and government organizations. Neither the “fabless semiconductor...

Development of level 2 processor for the readout of TMC

International Nuclear Information System (INIS)

Arai, Y.; Ikeno, M.; Murata, T.; Sudo, F.; Emura, T.

1995-01-01

We have developed a prototype 8-bit processor for the level 2 data processing for the Time Memory Cell (TMC). The first prototype processor successfully runs with 18 MHz clock. The operation of same clock frequency as TMC (30 MHz) will be easily achieved with simple modifications. Although the processor is very primitive one but shows its powerful performance and flexibility. To realize the compact TMC/L2P (Level 2 Processor) system, it is better to include the microcode memory within the chip. Encoding logic of the microcode must be included to reduce the microcode memory in this case. (J.P.N.)

Review of trigger and on-line processors at SLAC

International Nuclear Information System (INIS)

Lankford, A.J.

1984-07-01

The role of trigger and on-line processors in reducing data rates to manageable proportions in e + e - physics experiments is defined not by high physics or background rates, but by the large event sizes of the general-purpose detectors employed. The rate of e + e - annihilation is low, and backgrounds are not high; yet the number of physics processes which can be studied is vast and varied. This paper begins by briefly describing the role of trigger processors in the e + e - context. The usual flow of the trigger decision process is illustrated with selected examples of SLAC trigger processing. The features are mentioned of triggering at the SLC and the trigger processing plans of the two SLC detectors: The Mark II and the SLD. The most common on-line processors at SLAC, the BADC, the SLAC Scanner Processor, the SLAC FASTBUS Controller, and the VAX CAMAC Channel, are discussed. Uses of the 168/E, 3081/E, and FASTBUS VAX processors are mentioned. The manner in which these processors are interfaced and the function they serve on line is described. Finally, the accelerator control system for the SLC is outlined. This paper is a survey in nature, and hence, relies heavily upon references to previous publications for detailed description of work mentioned here. 27 references, 9 figures, 1 table

FY1995 study of design methodology and environment of high-performance processor architectures; 1995 nendo koseino processor architecture sekkeiho to sekkei kankyo no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The aim of our project is to develop high-performance processor architectures for both general purpose and application-specific purpose. We also plan to develop basic softwares, such as compliers, and various design aid tools for those architectures. We are particularly interested in performance evaluation at architecture design phase, design optimization, automatic generation of compliers from processor designs, and architecture design methodologies combined with circuit layout. We have investigated both microprocessor architectures and design methodologies / environments for the processors. Our goal is to establish design technologies for high-performance, low-power, low-cost and highly-reliable systems in system-on-silicon era. We have proposed PPRAM architecture for high-performance system using DRAM and logic mixture technology, Softcore processor architecture for special purpose processors in embedded systems, and Power-Pro architecture for low power systems. We also developed design methodologies and design environments for the above architectures as well as a new method for design verification of microprocessors. (NEDO)

Software-defined reconfigurable microwave photonics processor.

Science.gov (United States)

Pérez, Daniel; Gasulla, Ivana; Capmany, José

2015-06-01

We propose, for the first time to our knowledge, a software-defined reconfigurable microwave photonics signal processor architecture that can be integrated on a chip and is capable of performing all the main functionalities by suitable programming of its control signals. The basic configuration is presented and a thorough end-to-end design model derived that accounts for the performance of the overall processor taking into consideration the impact and interdependencies of both its photonic and RF parts. We demonstrate the model versatility by applying it to several relevant application examples.

Designing a dataflow processor using CλaSH

NARCIS (Netherlands)

Niedermeier, A.; Wester, Rinse; Wester, Rinse; Rovers, K.C.; Baaij, C.P.R.; Kuper, Jan; Smit, Gerardus Johannes Maria

2010-01-01

In this paper we show how a simple dataflow processor can be fully implemented using CλaSH, a high level HDL based on the functional programming language Haskell. The processor was described using Haskell, the CλaSH compiler was then used to translate the design into a fully synthesisable VHDL code.

Sequential Power-Dependence Theory

NARCIS (Netherlands)

Buskens, Vincent; Rijt, Arnout van de

2008-01-01

Existing methods for predicting resource divisions in laboratory exchange networks do not take into account the sequential nature of the experimental setting. We extend network exchange theory by considering sequential exchange. We prove that Sequential Power-Dependence Theory—unlike

Researching, building a soft-processor and Ethernet interface circuit using EDK

International Nuclear Information System (INIS)

Tuong Thi Thu Huong; Pham Ngoc Tuan; Truong Van Dat, Dang Lanh; Chau Thi Nhu Quynh

2014-01-01

The processor is an indispensable component in the measurement and automatic control systems. This report describes the fabrication of a soft-processor (32-bits, on-chip block RAM 64K, 50M clock, internal and peripheral bus) for receiving, sending and processing of data Ethernet packets. This processor is fabricated using the XPS component from EDK (Xilinx) software toolkit. After that, it is configured on the FPGA named Spartan XC3S500E circuit. A firmware of a processor for controlling the interface between processor and Ethernet port is written in C language and can play a role of a HOST (station) which has its own IP to connect to Ethernet network. Besides, there are some needed parts as follows: an Ethernet interfacing controller chip, a suitable cable providing a speed up to 100 Mbs and an application program running under Window XP environment written in LabView to communicate with soft-processor. (author)

A high-accuracy optical linear algebra processor for finite element applications

Science.gov (United States)

Casasent, D.; Taylor, B. K.

1984-01-01

Optical linear processors are computationally efficient computers for solving matrix-matrix and matrix-vector oriented problems. Optical system errors limit their dynamic range to 30-40 dB, which limits their accuray to 9-12 bits. Large problems, such as the finite element problem in structural mechanics (with tens or hundreds of thousands of variables) which can exploit the speed of optical processors, require the 32 bit accuracy obtainable from digital machines. To obtain this required 32 bit accuracy with an optical processor, the data can be digitally encoded, thereby reducing the dynamic range requirements of the optical system (i.e., decreasing the effect of optical errors on the data) while providing increased accuracy. This report describes a new digitally encoded optical linear algebra processor architecture for solving finite element and banded matrix-vector problems. A linear static plate bending case study is described which quantities the processor requirements. Multiplication by digital convolution is explained, and the digitally encoded optical processor architecture is advanced.

Eyewitness decisions in simultaneous and sequential lineups: a dual-process signal detection theory analysis.

Science.gov (United States)

Meissner, Christian A; Tredoux, Colin G; Parker, Janat F; MacLin, Otto H

2005-07-01

Many eyewitness researchers have argued for the application of a sequential alternative to the traditional simultaneous lineup, given its role in decreasing false identifications of innocent suspects (sequential superiority effect). However, Ebbesen and Flowe (2002) have recently noted that sequential lineups may merely bring about a shift in response criterion, having no effect on discrimination accuracy. We explored this claim, using a method that allows signal detection theory measures to be collected from eyewitnesses. In three experiments, lineup type was factorially combined with conditions expected to influence response criterion and/or discrimination accuracy. Results were consistent with signal detection theory predictions, including that of a conservative criterion shift with the sequential presentation of lineups. In a fourth experiment, we explored the phenomenological basis for the criterion shift, using the remember-know-guess procedure. In accord with previous research, the criterion shift in sequential lineups was associated with a reduction in familiarity-based responding. It is proposed that the relative similarity between lineup members may create a context in which fluency-based processing is facilitated to a greater extent when lineup members are presented simultaneously.

Low voltage 80 KV to 125 KV electron processors

International Nuclear Information System (INIS)

Lauppi, U.V.

1999-01-01

The classic electron beam technology made use of accelerating energies in the voltage range of 300 to 800 kV. The first EB processors - built for the curing of coatings - operated at 300 kV. The products to be treated were thicker than a simple layer of coating with thicknesses up to 100g and more. It was only in the beginning of the 1970's that industrial EB processors with accelerating voltages below 300 kV appeared on the market. Our company developed the first commercial electron accelerator without a beam scanner. The new EB machine featured a linear cathode, emitting a shower or 'curtain' of electrons over the full width of the product. These units were much smaller than anv previous EB processors and dedicated to the curing of coatings and other thin layers. ESI's first EB units operated with accelerating voltages between 150 and 200 kV. In 1993 ESI announced the introduction of a new generation of Electrocure. EB processors operating at 120 kV, and in 1998, at the RadTech North America '98 Conference in Chicago, the introduction of an 80 kV electron beam processor under the designation Microbeam LV

A fast track trigger processor for the OPAL detector at LEP

International Nuclear Information System (INIS)

Carter, A.A.; Jaroslawski, S.; Wagner, A.

1986-01-01

A fast hardware track trigger processor being built for the OPAL experiment is described. The processor will analyse data from the central drift chambers of OPAL to determine whether any tracks come from the interaction region, and thereby eliminate background events. The processor will find tracks over a large angular range, vertical strokecos thetavertical stroke < or approx. 0.95. The design of the processor is described, together with a brief account of its hardware implementation for OPAL. The results of feasibility studies are also presented. (orig.)

Launching applications on compute and service processors running under different operating systems in scalable network of processor boards with routers

Science.gov (United States)

Tomkins, James L [Albuquerque, NM; Camp, William J [Albuquerque, NM

2009-03-17

A multiple processor computing apparatus includes a physical interconnect structure that is flexibly configurable to support selective segregation of classified and unclassified users. The physical interconnect structure also permits easy physical scalability of the computing apparatus. The computing apparatus can include an emulator which permits applications from the same job to be launched on processors that use different operating systems.

Satellite on-board real-time SAR processor prototype

Science.gov (United States)

Bergeron, Alain; Doucet, Michel; Harnisch, Bernd; Suess, Martin; Marchese, Linda; Bourqui, Pascal; Desnoyers, Nicholas; Legros, Mathieu; Guillot, Ludovic; Mercier, Luc; Châteauneuf, François

2017-11-01

A Compact Real-Time Optronic SAR Processor has been successfully developed and tested up to a Technology Readiness Level of 4 (TRL4), the breadboard validation in a laboratory environment. SAR, or Synthetic Aperture Radar, is an active system allowing day and night imaging independent of the cloud coverage of the planet. The SAR raw data is a set of complex data for range and azimuth, which cannot be compressed. Specifically, for planetary missions and unmanned aerial vehicle (UAV) systems with limited communication data rates this is a clear disadvantage. SAR images are typically processed electronically applying dedicated Fourier transformations. This, however, can also be performed optically in real-time. Originally the first SAR images were optically processed. The optical Fourier processor architecture provides inherent parallel computing capabilities allowing real-time SAR data processing and thus the ability for compression and strongly reduced communication bandwidth requirements for the satellite. SAR signal return data are in general complex data. Both amplitude and phase must be combined optically in the SAR processor for each range and azimuth pixel. Amplitude and phase are generated by dedicated spatial light modulators and superimposed by an optical relay set-up. The spatial light modulators display the full complex raw data information over a two-dimensional format, one for the azimuth and one for the range. Since the entire signal history is displayed at once, the processor operates in parallel yielding real-time performances, i.e. without resulting bottleneck. Processing of both azimuth and range information is performed in a single pass. This paper focuses on the onboard capabilities of the compact optical SAR processor prototype that allows in-orbit processing of SAR images. Examples of processed ENVISAT ASAR images are presented. Various SAR processor parameters such as processing capabilities, image quality (point target analysis), weight and

Particle simulation on a distributed memory highly parallel processor

International Nuclear Information System (INIS)

Sato, Hiroyuki; Ikesaka, Morio

1990-01-01

This paper describes parallel molecular dynamics simulation of atoms governed by local force interaction. The space in the model is divided into cubic subspaces and mapped to the processor array of the CAP-256, a distributed memory, highly parallel processor developed at Fujitsu Labs. We developed a new technique to avoid redundant calculation of forces between atoms in different processors. Experiments showed the communication overhead was less than 5%, and the idle time due to load imbalance was less than 11% for two model problems which contain 11,532 and 46,128 argon atoms. From the software simulation, the CAP-II which is under development is estimated to be about 45 times faster than CAP-256 and will be able to run the same problem about 40 times faster than Fujitsu's M-380 mainframe when 256 processors are used. (author)

Code compression for VLIW embedded processors

Science.gov (United States)

Piccinelli, Emiliano; Sannino, Roberto

2004-04-01

The implementation of processors for embedded systems implies various issues: main constraints are cost, power dissipation and die area. On the other side, new terminals perform functions that require more computational flexibility and effort. Long code streams must be loaded into memories, which are expensive and power consuming, to run on DSPs or CPUs. To overcome this issue, the "SlimCode" proprietary algorithm presented in this paper (patent pending technology) can reduce the dimensions of the program memory. It can run offline and work directly on the binary code the compiler generates, by compressing it and creating a new binary file, about 40% smaller than the original one, to be loaded into the program memory of the processor. The decompression unit will be a small ASIC, placed between the Memory Controller and the System bus of the processor, keeping unchanged the internal CPU architecture: this implies that the methodology is completely transparent to the core. We present comparisons versus the state-of-the-art IBM Codepack algorithm, along with its architectural implementation into the ST200 VLIW family core.

Recursive Matrix Inverse Update On An Optical Processor

Science.gov (United States)

Casasent, David P.; Baranoski, Edward J.

1988-02-01

A high accuracy optical linear algebraic processor (OLAP) using the digital multiplication by analog convolution (DMAC) algorithm is described for use in an efficient matrix inverse update algorithm with speed and accuracy advantages. The solution of the parameters in the algorithm are addressed and the advantages of optical over digital linear algebraic processors are advanced.

Evaluation of the Intel Nehalem-EX server processor

CERN Document Server

Jarp, S; Leduc, J; Nowak, A; CERN. Geneva. IT Department

2010-01-01

In this paper we report on a set of benchmark results recently obtained by the CERN openlab by comparing the 4-socket, 32-core Intel Xeon X7560 server with the previous generation 4-socket server, based on the Xeon X7460 processor. The Xeon X7560 processor represents a major change in many respects, especially the memory sub-system, so it was important to make multiple comparisons. In most benchmarks the two 4-socket servers were compared. It should be underlined that both servers represent the “top of the line” in terms of frequency. However, in some cases, it was important to compare systems that integrated the latest processor features, such as QPI links, Symmetric multithreading and over-clocking via Turbo mode, and in such situations the X7560 server was compared to a dual socket L5520 based system with an identical frequency of 2.26 GHz. Before summarizing the results we must stress the fact that benchmarking of modern processors is a very complex affair. One has to control (at least) the following ...

Graphical user interface for TOUGH/TOUGH2 - development of database, pre-processor, and post-processor

Energy Technology Data Exchange (ETDEWEB)

Sato, Tatsuya; Okabe, Takashi; Osato, Kazumi [Geothermal Energy Research and Development Co., Ltd., Tokyo (Japan)

1995-03-01

One of the advantages of the TOUGH/TOUGH2 (Pruess, 1987 and 1991) is the modeling using {open_quotes}free shape{close_quotes} polygonal blocks. However, the treatment of three-dimensional information, particularly for TOUGH/TOUGH2 is not easy because of the {open_quotes}free shape{close_quotes} polygonal blocks. Therefore, we have developed a database named {open_quotes}GEOBASE{close_quotes} and a pre/post-processor named {open_quotes}GEOGRAPH{close_quotes} for TOUGH/TOUGH2 on engineering work station (EWS). {open_quotes}GEOGRAPH{close_quotes} is based on the ORACLE{sup *1} relational database manager system to access data sets of surface exploration (geology, geophysics, geochemistry, etc.), drilling (well trajectory, geological column, logging, etc.), well testing (production test, injection test, interference test, tracer test, etc.) and production/injection history.{open_quotes}GEOGRAPH{close_quotes} consists of {open_quotes}Pre-processor{close_quotes} that can construct the three-dimensional free shape reservoir modeling by mouse operation on X-window and {open_quotes}Post-processor{close_quotes} that can display several kinds of two/three-dimensional maps and X-Y plots to compile data on {open_quotes}GEOBASE{close_quotes} and result of TOUGH/TOUGH2 calculation. This paper shows concept of the systems and examples of utilization.

An Undergraduate Survey Course on Asynchronous Sequential Logic, Ladder Logic, and Fuzzy Logic

Science.gov (United States)

Foster, D. L.

2012-01-01

For a basic foundation in computer engineering, universities traditionally teach synchronous sequential circuit design, using discrete gates or field programmable gate arrays, and a microcomputers course that includes basic I/O processing. These courses, though critical, expose students to only a small subset of tools. At co-op schools like…

Utilizing a sequential injection system furnished with an extraction microcolumn as a novel approach for executing sequential extractions of metal species in solid samples

DEFF Research Database (Denmark)

Chomchoei, R.; Hansen, Elo Harald; Shiowatana, J.

2007-01-01

This communication presents a novel approach to perform sequential extraction of elements in solid samples by using a sequential injection (SI) system incorporating a specially designed extraction microcolumn. Based on the operation of the syringe pump, different modes of extraction are potentially...... that the system entails many advantages such as being fully automated, and besides being characterised by rapidity, ease of operation and robustness, it is less prone to risks of contamination and personal errors as encountered in traditional batch systems. Moreover, improvement of the precision and accuracy...... of the chemical fractionation of metal in solids as compared with previous reports are obtained. The system ensures that extraction is performed at designated pH values. Variation of sample weight to column volume ratios do not affect the amounts of extractable metals, nor do extraction flow rates ranging from 50...

Biomass is beginning to threaten the wood-processors

International Nuclear Information System (INIS)

Beer, G.; Sobinkovic, B.

2004-01-01

In this issue an exploitation of biomass in Slovak Republic is analysed. Some new projects of constructing of the stoke-holds for biomass processing are published. The grants for biomass are ascending the prices of wood raw material, which is thus becoming less accessible for the wood-processors. An excessive wood export threatens the domestic processors

Reconfigurable signal processor designs for advanced digital array radar systems

Science.gov (United States)

Suarez, Hernan; Zhang, Yan (Rockee); Yu, Xining

2017-05-01

The new challenges originated from Digital Array Radar (DAR) demands a new generation of reconfigurable backend processor in the system. The new FPGA devices can support much higher speed, more bandwidth and processing capabilities for the need of digital Line Replaceable Unit (LRU). This study focuses on using the latest Altera and Xilinx devices in an adaptive beamforming processor. The field reprogrammable RF devices from Analog Devices are used as analog front end transceivers. Different from other existing Software-Defined Radio transceivers on the market, this processor is designed for distributed adaptive beamforming in a networked environment. The following aspects of the novel radar processor will be presented: (1) A new system-on-chip architecture based on Altera's devices and adaptive processing module, especially for the adaptive beamforming and pulse compression, will be introduced, (2) Successful implementation of generation 2 serial RapidIO data links on FPGA, which supports VITA-49 radio packet format for large distributed DAR processing. (3) Demonstration of the feasibility and capabilities of the processor in a Micro-TCA based, SRIO switching backplane to support multichannel beamforming in real-time. (4) Application of this processor in ongoing radar system development projects, including OU's dual-polarized digital array radar, the planned new cylindrical array radars, and future airborne radars.

Parallel processor for fast event analysis

International Nuclear Information System (INIS)

Hensley, D.C.

1983-01-01

Current maximum data rates from the Spin Spectrometer of approx. 5000 events/s (up to 1.3 MBytes/s) and minimum analysis requiring at least 3000 operations/event require a CPU cycle time near 70 ns. In order to achieve an effective cycle time of 70 ns, a parallel processing device is proposed where up to 4 independent processors will be implemented in parallel. The individual processors are designed around the Am2910 Microsequencer, the AM29116 μP, and the Am29517 Multiplier. Satellite histogramming in a mass memory system will be managed by a commercial 16-bit μP system

PC_Eyewitness and the sequential superiority effect: computer-based lineup administration.

Science.gov (United States)

MacLin, Otto H; Zimmerman, Laura A; Malpass, Roy S

2005-06-01

Computer technology has become an increasingly important tool for conducting eyewitness identifications. In the area of lineup identifications, computerized administration offers several advantages for researchers and law enforcement. PC_Eyewitness is designed specifically to administer lineups. To assess this new lineup technology, two studies were conducted in order to replicate the results of previous studies comparing simultaneous and sequential lineups. One hundred twenty university students participated in each experiment. Experiment 1 used traditional paper-and-pencil lineup administration methods to compare simultaneous to sequential lineups. Experiment 2 used PC_Eyewitness to administer simultaneous and sequential lineups. The results of these studies were compared to the meta-analytic results reported by N. Steblay, J. Dysart, S. Fulero, and R. C. L. Lindsay (2001). No differences were found between paper-and-pencil and PC_Eyewitness lineup administration methods. The core findings of the N. Steblay et al. (2001) meta-analysis were replicated by both administration procedures. These results show that computerized lineup administration using PC_Eyewitness is an effective means for gathering eyewitness identification data.

Asymmetrical floating point array processors, their application to exploration and exploitation

Energy Technology Data Exchange (ETDEWEB)

Geriepy, B L

1983-01-01

An asymmetrical floating point array processor is a special-purpose scientific computer which operates under asymmetrical control of a host computer. Although an array processor can receive fixed point input and produce fixed point output, its primary mode of operation is floating point. The first generation of array processors was oriented towards time series information. The next generation of array processors has proved much more versatile and their applicability ranges from petroleum reservoir simulation to speech syntheses. Array processors are becoming commonplace in mining, the primary usage being construction of grids-by usual methods or by kriging. The Australian mining community is among the world's leaders in regard to computer-assisted exploration and exploitation systems. Part of this leadership role must be providing guidance to computer vendors in regard to current and future requirements.

On the effective parallel programming of multi-core processors

NARCIS (Netherlands)

Varbanescu, A.L.

2010-01-01

Multi-core processors are considered now the only feasible alternative to the large single-core processors which have become limited by technological aspects such as power consumption and heat dissipation. However, due to their inherent parallel structure and their diversity, multi-cores are

The UA1 upgrade calorimeter trigger processor

International Nuclear Information System (INIS)

Bains, N.; Baird, S.A.; Biddulph, P.

1990-01-01

The increased luminosity of the improved CERN Collider and the more subtle signals of second-generation collider physics demand increasingly sophisticated triggering. We have built a new first-level trigger processor designed to use the excellent granularity of the UA1 upgrade calorimeter. This device is entirely digital and handles events in 1.5 μs, thus introducing no deadtime. Its most novel feature is fast two-dimensional electromagnetic cluster-finding with the possibility of demanding an isolated shower of limited penetration. The processor allows multiple combinations of triggers on electromagnetic showers, hadronic jets and energy sums, including a total-energy veto of multiple interactions and a full vector sum of missing transverse energy. This hard-wired processor is about five times more powerful than its predecessor, and makes extensive use of pipelining techniques. It was used extensively in the 1988 and 1989 runs of the CERN Collider. (author)

The UA1 upgrade calorimeter trigger processor

International Nuclear Information System (INIS)

Bains, M.; Charleton, D.; Ellis, N.; Garvey, J.; Gregory, J.; Jimack, M.P.; Jovanovic, P.; Kenyon, I.R.; Baird, S.A.; Campbell, D.; Cawthraw, M.; Coughlan, J.; Flynn, P.; Galagedera, S.; Grayer, G.; Halsall, R.; Shah, T.P.; Stephens, R.; Biddulph, P.; Eisenhandler, E.; Fensome, I.F.; Landon, M.; Robinson, D.; Oliver, J.; Sumorok, K.

1990-01-01

The increased luminosity of the improved CERN Collider and the more subtle signals of second-generation collider physics demand increasingly sophisticated triggering. We have built a new first-level trigger processor designed to use the excellent granularity of the UA1 upgrade calorimeter. This device is entirely digital and handles events in 1.5 μs, thus introducing no dead time. Its most novel feature is fast two-dimensional electromagnetic cluster-finding with the possibility of demanding an isolated shower of limited penetration. The processor allows multiple combinations of triggers on electromagnetic showers, hadronic jets and energy sums, including a total-energy veto of multiple interactions and a full vector sum of missing transverse energy. This hard-wired processor is about five times more powerful than its predecessor, and makes extensive use of pipelining techniques. It was used extensively in the 1988 and 1989 runs of the CERN Collider. (orig.)

Benchmarking NWP Kernels on Multi- and Many-core Processors

Science.gov (United States)

Michalakes, J.; Vachharajani, M.

2008-12-01

Increased computing power for weather, climate, and atmospheric science has provided direct benefits for defense, agriculture, the economy, the environment, and public welfare and convenience. Today, very large clusters with many thousands of processors are allowing scientists to move forward with simulations of unprecedented size. But time-critical applications such as real-time forecasting or climate prediction need strong scaling: faster nodes and processors, not more of them. Moreover, the need for good cost- performance has never been greater, both in terms of performance per watt and per dollar. For these reasons, the new generations of multi- and many-core processors being mass produced for commercial IT and "graphical computing" (video games) are being scrutinized for their ability to exploit the abundant fine- grain parallelism in atmospheric models. We present results of our work to date identifying key computational kernels within the dynamics and physics of a large community NWP model, the Weather Research and Forecast (WRF) model. We benchmark and optimize these kernels on several different multi- and many-core processors. The goals are to (1) characterize and model performance of the kernels in terms of computational intensity, data parallelism, memory bandwidth pressure, memory footprint, etc. (2) enumerate and classify effective strategies for coding and optimizing for these new processors, (3) assess difficulties and opportunities for tool or higher-level language support, and (4) establish a continuing set of kernel benchmarks that can be used to measure and compare effectiveness of current and future designs of multi- and many-core processors for weather and climate applications.

Processors for wavelet analysis and synthesis: NIFS and TI-C80 MVP

Science.gov (United States)

Brooks, Geoffrey W.

1996-03-01

Two processors are considered for image quadrature mirror filtering (QMF). The neuromorphic infrared focal-plane sensor (NIFS) is an existing prototype analog processor offering high speed spatio-temporal Gaussian filtering, which could be used for the QMF low- pass function, and difference of Gaussian filtering, which could be used for the QMF high- pass function. Although not designed specifically for wavelet analysis, the biologically- inspired system accomplishes the most computationally intensive part of QMF processing. The Texas Instruments (TI) TMS320C80 Multimedia Video Processor (MVP) is a 32-bit RISC master processor with four advanced digital signal processors (DSPs) on a single chip. Algorithm partitioning, memory management and other issues are considered for optimal performance. This paper presents these considerations with simulated results leading to processor implementation of high-speed QMF analysis and synthesis.

Accurately controlled sequential self-folding structures by polystyrene film

Science.gov (United States)

Deng, Dongping; Yang, Yang; Chen, Yong; Lan, Xing; Tice, Jesse

2017-08-01

Four-dimensional (4D) printing overcomes the traditional fabrication limitations by designing heterogeneous materials to enable the printed structures evolve over time (the fourth dimension) under external stimuli. Here, we present a simple 4D printing of self-folding structures that can be sequentially and accurately folded. When heated above their glass transition temperature pre-strained polystyrene films shrink along the XY plane. In our process silver ink traces printed on the film are used to provide heat stimuli by conducting current to trigger the self-folding behavior. The parameters affecting the folding process are studied and discussed. Sequential folding and accurately controlled folding angles are achieved by using printed ink traces and angle lock design. Theoretical analyses are done to guide the design of the folding processes. Programmable structures such as a lock and a three-dimensional antenna are achieved to test the feasibility and potential applications of this method. These self-folding structures change their shapes after fabrication under controlled stimuli (electric current) and have potential applications in the fields of electronics, consumer devices, and robotics. Our design and fabrication method provides an easy way by using silver ink printed on polystyrene films to 4D print self-folding structures for electrically induced sequential folding with angular control.

ACP/R3000 processors in data acquisition systems

International Nuclear Information System (INIS)

Deppe, J.; Areti, H.; Atac, R.

1989-02-01

We describe ACP/R3000 processor based data acquisition systems for high energy physics. This VME bus compatible processor board, with a computational power equivalent to 15 VAX 11/780s or better, contains 8 Mb of memory for event buffering and has a high speed secondary bus that allows data gathering from front end electronics. 2 refs., 3 figs

GA103: A microprogrammable processor for online filtering

International Nuclear Information System (INIS)

Calzas, A.; Danon, G.; Bouquet, B.

1981-01-01

GA 103 is a 16 bit microprogrammable processor which emulates the PDP 11 instruction set. It is based on the Am 2900 slices. It allows user-implemented microinstructions and addition of hardwired processors. It will perform on-line filtering tasks in the NA 14 experiment at CERN, based on the reconstruction of transverse momentum of photons detected in a lead glass calorimeter. (orig.)

Real-time trajectory optimization on parallel processors

Science.gov (United States)

Psiaki, Mark L.

1993-01-01

A parallel algorithm has been developed for rapidly solving trajectory optimization problems. The goal of the work has been to develop an algorithm that is suitable to do real-time, on-line optimal guidance through repeated solution of a trajectory optimization problem. The algorithm has been developed on an INTEL iPSC/860 message passing parallel processor. It uses a zero-order-hold discretization of a continuous-time problem and solves the resulting nonlinear programming problem using a custom-designed augmented Lagrangian nonlinear programming algorithm. The algorithm achieves parallelism of function, derivative, and search direction calculations through the principle of domain decomposition applied along the time axis. It has been encoded and tested on 3 example problems, the Goddard problem, the acceleration-limited, planar minimum-time to the origin problem, and a National Aerospace Plane minimum-fuel ascent guidance problem. Execution times as fast as 118 sec of wall clock time have been achieved for a 128-stage Goddard problem solved on 32 processors. A 32-stage minimum-time problem has been solved in 151 sec on 32 processors. A 32-stage National Aerospace Plane problem required 2 hours when solved on 32 processors. A speed-up factor of 7.2 has been achieved by using 32-nodes instead of 1-node to solve a 64-stage Goddard problem.

The ATLAS Level-1 Central Trigger Processor (CTP)

CERN Document Server

Spiwoks, Ralf; Ellis, Nick; Farthouat, P; Gällnö, P; Haller, J; Krasznahorkay, A; Maeno, T; Pauly, T; Pessoa-Lima, H; Resurreccion-Arcas, I; Schuler, G; De Seixas, J M; Torga-Teixeira, R; Wengler, T

2005-01-01

The ATLAS Level-1 Central Trigger Processor (CTP) combines information from calorimeter and muon trigger processors and makes the final Level-1 Accept (L1A) decision on the basis of lists of selection criteria (trigger menus). In addition to the event-selection decision, the CTP also provides trigger summary information to the Level-2 trigger and the data acquisition system. It further provides accumulated and bunch-by-bunch scaler data for monitoring of the trigger, detector and beam conditions. The CTP is presented and results are shown from tests with the calorimeter adn muon trigger processors connected to detectors in a particle beam, as well as from stand-alone full-system tests in the laboratory which were used to validate the CTP.

A Processor-Sharing Scheduling Strategy for NFV Nodes

Directory of Open Access Journals (Sweden)

Giuseppe Faraci

2016-01-01

Full Text Available The introduction of the two paradigms SDN and NFV to “softwarize” the current Internet is making management and resource allocation two key challenges in the evolution towards the Future Internet. In this context, this paper proposes Network-Aware Round Robin (NARR, a processor-sharing strategy, to reduce delays in traversing SDN/NFV nodes. The application of NARR alleviates the job of the Orchestrator by automatically working at the intranode level, dynamically assigning the processor slices to the virtual network functions (VNFs according to the state of the queues associated with the output links of the network interface cards (NICs. An extensive simulation set is presented to show the improvements achieved with respect to two more processor-sharing strategies chosen as reference.

Processor farming method for multi-scale analysis of masonry structures

Science.gov (United States)

Krejčí, Tomáš; Koudelka, Tomáš

2017-07-01

This paper describes a processor farming method for a coupled heat and moisture transport in masonry using a two-level approach. The motivation for the two-level description comes from difficulties connected with masonry structures, where the size of stone blocks is much larger than the size of mortar layers and very fine finite element mesh has to be used. The two-level approach is suitable for parallel computing because nearly all computations can be performed independently with little synchronization. This approach is called processor farming. The master processor is dealing with the macro-scale level - the structure and the slave processors are dealing with a homogenization procedure on the meso-scale level which is represented by an appropriate representative volume element.

[Improving speech comprehension using a new cochlear implant speech processor].

Science.gov (United States)

Müller-Deile, J; Kortmann, T; Hoppe, U; Hessel, H; Morsnowski, A

2009-06-01

The aim of this multicenter clinical field study was to assess the benefits of the new Freedom 24 sound processor for cochlear implant (CI) users implanted with the Nucleus 24 cochlear implant system. The study included 48 postlingually profoundly deaf experienced CI users who demonstrated speech comprehension performance with their current speech processor on the Oldenburg sentence test (OLSA) in quiet conditions of at least 80% correct scores and who were able to perform adaptive speech threshold testing using the OLSA in noisy conditions. Following baseline measures of speech comprehension performance with their current speech processor, subjects were upgraded to the Freedom 24 speech processor. After a take-home trial period of at least 2 weeks, subject performance was evaluated by measuring the speech reception threshold with the Freiburg multisyllabic word test and speech intelligibility with the Freiburg monosyllabic word test at 50 dB and 70 dB in the sound field. The results demonstrated highly significant benefits for speech comprehension with the new speech processor. Significant benefits for speech comprehension were also demonstrated with the new speech processor when tested in competing background noise.In contrast, use of the Abbreviated Profile of Hearing Aid Benefit (APHAB) did not prove to be a suitably sensitive assessment tool for comparative subjective self-assessment of hearing benefits with each processor. Use of the preprocessing algorithm known as adaptive dynamic range optimization (ADRO) in the Freedom 24 led to additional improvements over the standard upgrade map for speech comprehension in quiet and showed equivalent performance in noise. Through use of the preprocessing beam-forming algorithm BEAM, subjects demonstrated a highly significant improved signal-to-noise ratio for speech comprehension thresholds (i.e., signal-to-noise ratio for 50% speech comprehension scores) when tested with an adaptive procedure using the Oldenburg

[Co-composting high moisture vegetable waste and flower waste in a sequential fed operation].

Science.gov (United States)

Zhang, Xiangfeng; Wang, Hongtao; Nie, Yongfeng

2003-11-01

Co-composting of high moisture vegetable wastes (celery and cabbage) and flower wastes (carnation) were studied in a sequential fed bed. The preliminary materials of composting were celery and carnation wastes. The sequential fed materials of composting were cabbage wastes and were fed every 4 days. Moisture content of mixture materials was between 60% and 70%. Composting was done in an aerobic static bed of composting based temperature feedback and control via aeration rate regulation. Aeration was ended when temperature of the pile was about 40 degrees C. Changes of composting of temperature, aeration rate, water content, organic matter, ash, pH, volume, NH4(+)-N, and NO3(-)-N were studied. Results show that co-composting of high moisture vegetable wastes and flower wastes, in a sequential fed aerobic static bed based temperature feedback and control via aeration rate regulation, can stabilize organic matter and removal water rapidly. The sequential fed operation are effective to overcome the difficult which traditional composting cannot applied successfully where high moisture vegetable wastes in more excess of flower wastes, such as Dianchi coastal.

Hardware processor for tracking particles in an alternating-gradient synchrotron

International Nuclear Information System (INIS)

Johnson, M.; Avilez, C.

1987-01-01

We discuss the design and performance of special-purpose processors for tracking particles through an alternating-gradient synchrotron. We present block diagram designs for two hardware processors. Both processors use algorithms based on the 'kick' approximation, i.e., transport matrices are used for dipoles and quadrupoles, and the thin-lens approximation is used for all higher multipoles. The faster processor makes extensive use of memory look-up tables for evaluating functions. For the case of magnets with multipoles up to pole 30 and using one kick per magnet, this processor can track 19 particles through an accelerator at a rate that is only 220 times slower than the time it takes real particles to travel around the machine. For a model consisting of only thin lenses, it is only 150 times slower than real particles. An additional factor of 2 can be obtained with chips now becoming available. The number of magnets in the accelerator is limited only by the amount of memory available for storing magnet parameters. (author) 20 refs., 7 figs., 2 tabs

High-speed special-purpose processor for event selection by number of direct tracks

International Nuclear Information System (INIS)

Kalinnikov, V.A.; Krastev, V.R.; Chudakov, E.A.

1986-01-01

A processor which uses data on events from five detector planes is described. To increase economy and speed in parallel processing, the processor converts the input data to superposition code and recognizes tracks by a generated search mask. The resolving time of the processor is ≤300 nsec. The processor is CAMAC-compatible and uses ECL integrated circuits

Multibus-based parallel processor for simulation

Science.gov (United States)

Ogrady, E. P.; Wang, C.-H.

1983-01-01

A Multibus-based parallel processor simulation system is described. The system is intended to serve as a vehicle for gaining hands-on experience, testing system and application software, and evaluating parallel processor performance during development of a larger system based on the horizontal/vertical-bus interprocessor communication mechanism. The prototype system consists of up to seven Intel iSBC 86/12A single-board computers which serve as processing elements, a multiple transmission controller (MTC) designed to support system operation, and an Intel Model 225 Microcomputer Development System which serves as the user interface and input/output processor. All components are interconnected by a Multibus/IEEE 796 bus. An important characteristic of the system is that it provides a mechanism for a processing element to broadcast data to other selected processing elements. This parallel transfer capability is provided through the design of the MTC and a minor modification to the iSBC 86/12A board. The operation of the MTC, the basic hardware-level operation of the system, and pertinent details about the iSBC 86/12A and the Multibus are described.

Monitoring the performance of off-site processors

International Nuclear Information System (INIS)

Miller, C.C.

1995-01-01

Commercial nuclear power plants have been able to utilize the latest technologies and achieve large volume reduction by obtaining off-site waste processor services. Although the use of such services reduce the burden of waste processing it also reduces the utility's control over the process. Monitoring the performance of off-site processors is important so that the utility is cognizant of the waste disposition for required regulatory reporting. In addition to obtaining data for Reg Guide 1.21 reporting, Performance monitoring is important to determine which vendor and which services to utilize. Off-site processor services were initially offered for the decontamination of metallic waste. Since that time the list of services has expanded to include supercompaction, survey for release, incineration and metal melting. The number of vendors offering off-site services has increased and the services they offer vary. processing rates vary between vendors and have different charge bases. Determining which vendor to use for what service can be complicated and confusing

Digital Signal Processor System for AC Power Drivers

Directory of Open Access Journals (Sweden)

Ovidiu Neamtu

2009-10-01

Full Text Available DSP (Digital Signal Processor is the bestsolution for motor control systems to make possible thedevelopment of advanced motor drive systems. The motorcontrol processor calculates the required motor windingvoltage magnitude and frequency to operate the motor atthe desired speed. A PWM (Pulse Width Modulationcircuit controls the on and off duty cycle of the powerinverter switches to vary the magnitude of the motorvoltages.

Early experience with the cochlear ESPrit ear-level speech processor in children.

Science.gov (United States)

Totten, C; Cope, Y; McCormick, B

2000-12-01

The ESPrit ear-level speech processor has recently become available in the United Kingdom for use with the Nucleus CI24M multichannel cochlear implant. We report on the use of this ear-level processor with 6 children, ages 8 to 15 years. In this study, all patients were initially fitted with the SPrint body-worn processor, this being a prerequisite for programming the ESPrit. Five of the children were fitted successfully with the ESPrit and are using their devices consistently. The results show that patient experience with the ESPrit has been favorable, although there have been some device and programming difficulties. Aided threshold measures show that the ESPrit processor performs at least as well as the SPrint processor, with a trend toward improved aided thresholds for the ESPrit processor compared with the SPrint processor. Further study of the functional benefit of both of these devices may confirm these potential gains. The ESPrit device currently has a disadvantage for children in that it does not support FM radio hearing aid use. Finally, caution is advised in the fitting of the ESPrit in very young children or inexperienced listeners, because of difficulties in monitoring device function.

Survey of cochlear implant user satisfaction with the Neptune™ waterproof sound processor

Directory of Open Access Journals (Sweden)

Jeroen J. Briaire

2016-04-01

Full Text Available A multi-center self-assessment survey was conducted to evaluate patient satisfaction with the Advanced Bionics Neptune™ waterproof sound processor used with the AquaMic™ totally submersible microphone. Subjective satisfaction with the different Neptune™ wearing options, comfort, ease of use, sound quality and use of the processor in a range of active and water related situations were assessed for 23 adults and 73 children, using an online and paper based questionnaire. Upgraded subjects compared their previous processor to the Neptune™. The Neptune™ was most popular for use in general sports and in the pool. Subjects were satisfied with the sound quality of the sound processor outside and under water and following submersion. Seventyeight percent of subjects rated waterproofness as being very useful and 83% of the newly implanted subjects selected waterproofness as one of the reasons why they chose the Neptune™ processor. Providing a waterproof sound processor is considered by cochlear implant recipients to be useful and important and is a factor in their processor choice. Subjects reported that they were satisfied with the Neptune™ sound quality, ease of use and different wearing options.

A word processor optimized for preparing journal articles and student papers.

Science.gov (United States)

Wolach, A H; McHale, M A

2001-11-01

A new Windows-based word processor for preparing journal articles and student papers is described. In addition to standard features found in word processors, the present word processor provides specific help in preparing manuscripts. Clicking on "Reference Help (APA Form)" in the "File" menu provides a detailed help system for entering the references in a journal article. Clicking on "Examples and Explanations of APA Form" provides a help system with examples of the various sections of a review article, journal article that has one experiment, or journal article that has two or more experiments. The word processor can automatically place the manuscript page header and page number at the top of each page using the form required by APA and Psychonomic Society journals. The "APA Form" submenu of the "Help" menu provides detailed information about how the word processor is optimized for preparing articles and papers.

Sequential capillary electrophoresis analysis using optically gated sample injection and UV/vis detection.

Science.gov (United States)

Liu, Xiaoxia; Tian, Miaomiao; Camara, Mohamed Amara; Guo, Liping; Yang, Li

2015-10-01

We present sequential CE analysis of amino acids and L-asparaginase-catalyzed enzyme reaction, by combing the on-line derivatization, optically gated (OG) injection and commercial-available UV-Vis detection. Various experimental conditions for sequential OG-UV/vis CE analysis were investigated and optimized by analyzing a standard mixture of amino acids. High reproducibility of the sequential CE analysis was demonstrated with RSD values (n = 20) of 2.23, 2.57, and 0.70% for peak heights, peak areas, and migration times, respectively, and the LOD of 5.0 μM (for asparagine) and 2.0 μM (for aspartic acid) were obtained. With the application of the OG-UV/vis CE analysis, sequential online CE enzyme assay of L-asparaginase-catalyzed enzyme reaction was carried out by automatically and continuously monitoring the substrate consumption and the product formation every 12 s from the beginning to the end of the reaction. The Michaelis constants for the reaction were obtained and were found to be in good agreement with the results of traditional off-line enzyme assays. The study demonstrated the feasibility and reliability of integrating the OG injection with UV/vis detection for sequential online CE analysis, which could be of potential value for online monitoring various chemical reaction and bioprocesses. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Extended performance electric propulsion power processor design study. Volume 2: Technical summary

Science.gov (United States)

Biess, J. J.; Inouye, L. Y.; Schoenfeld, A. D.

1977-01-01

Electric propulsion power processor technology has processed during the past decade to the point that it is considered ready for application. Several power processor design concepts were evaluated and compared. Emphasis was placed on a 30 cm ion thruster power processor with a beam power rating supply of 2.2KW to 10KW for the main propulsion power stage. Extension in power processor performance were defined and were designed in sufficient detail to determine efficiency, component weight, part count, reliability and thermal control. A detail design was performed on a microprocessor as the thyristor power processor controller. A reliability analysis was performed to evaluate the effect of the control electronics redesign. Preliminary electrical design, mechanical design and thermal analysis were performed on a 6KW power transformer for the beam supply. Bi-Mod mechanical, structural and thermal control configurations were evaluated for the power processor and preliminary estimates of mechanical weight were determined.

First Results of an “Artificial Retina” Processor Prototype

International Nuclear Information System (INIS)

Cenci, Riccardo; Bedeschi, Franco; Marino, Pietro; Morello, Michael J.; Ninci, Daniele; Piucci, Alessio; Punzi, Giovanni; Ristori, Luciano; Spinella, Franco; Stracka, Simone; Tonelli, Diego; Walsh, John

2016-01-01

We report on the performance of a specialized processor capable of reconstructing charged particle tracks in a realistic LHC silicon tracker detector, at the same speed of the readout and with sub-microsecond latency. The processor is based on an innovative pattern-recognition algorithm, called “artificial retina algorithm”, inspired from the vision system of mammals. A prototype of the processor has been designed, simulated, and implemented on Tel62 boards equipped with high-bandwidth Altera Stratix III FPGA devices. The prototype is the first step towards a real-time track reconstruction device aimed at processing complex events of high-luminosity LHC experiments at 40 MHz crossing rate

Nonlinear Wave Simulation on the Xeon Phi Knights Landing Processor

Science.gov (United States)

Hristov, Ivan; Goranov, Goran; Hristova, Radoslava

2018-02-01

We consider an interesting from computational point of view standing wave simulation by solving coupled 2D perturbed Sine-Gordon equations. We make an OpenMP realization which explores both thread and SIMD levels of parallelism. We test the OpenMP program on two different energy equivalent Intel architectures: 2× Xeon E5-2695 v2 processors, (code-named "Ivy Bridge-EP") in the Hybrilit cluster, and Xeon Phi 7250 processor (code-named "Knights Landing" (KNL). The results show 2 times better performance on KNL processor.

M7--a high speed digital processor for second level trigger selections

International Nuclear Information System (INIS)

Droege, T.F.; Gaines, I.; Turner, K.J.

1978-01-01

A digital processor is described which reconstructs mass and momentum as a second-level trigger selection. The processor is a five-address, microprogramed, pipelined, ECL machine with simultaneous memory access to four operands which load two parallel multipliers and an ALU. Source data modules are extensions of the processor

Discussion paper for a highly parallel array processor-based machine

International Nuclear Information System (INIS)

Hagstrom, R.; Bolotin, G.; Dawson, J.

1984-01-01

The architectural plant for a quickly realizable implementation of a highly parallel special-purpose computer system with peak performance in the range of 6 billion floating point operations per second is discussed. The architecture is suitable to Lattice Gauge theoretical computations of fundamental physics interest and may be applicable to a range of other problems which deal with numerically intensive computational problems. The plan is quickly realizable because it employs a maximum of commercially available hardware subsystems and because the architecture is software-transparent to the individual processors, allowing straightforward re-use of whatever commercially available operating-systems and support software that is suitable to run on the commercially-produced processors. A tiny prototype instrument, designed along this architecture has already operated. A few elementary examples of programs which can run efficiently are presented. The large machine which the authors would propose to build would be based upon a highly competent array-processor, the ST-100 Array Processor, and specific design possibilities are discussed. The first step toward realizing this plan practically is to install a single ST-100 to allow algorithm development to proceed while a demonstration unit is built using two of the ST-100 Array Processors

SSC 254 Screen-Based Word Processors: Production Tests. The Lanier Word Processor.

Science.gov (United States)

Moyer, Ruth A.

Designed for use in Trident Technical College's Secretarial Lab, this series of 12 production tests focuses on the use of the Lanier Word Processor for a variety of tasks. In tests 1 and 2, students are required to type and print out letters. Tests 3 through 8 require students to reformat a text; make corrections on a letter; divide and combine…

Performance of Artificial Intelligence Workloads on the Intel Core 2 Duo Series Desktop Processors

OpenAIRE

Abdul Kareem PARCHUR; Kuppangari Krishna RAO; Fazal NOORBASHA; Ram Asaray SINGH

2010-01-01

As the processor architecture becomes more advanced, Intel introduced its Intel Core 2 Duo series processors. Performance impact on Intel Core 2 Duo processors are analyzed using SPEC CPU INT 2006 performance numbers. This paper studied the behavior of Artificial Intelligence (AI) benchmarks on Intel Core 2 Duo series processors. Moreover, we estimated the task completion time (TCT) @1 GHz, @2 GHz and @3 GHz Intel Core 2 Duo series processors frequency. Our results show the performance scalab...

Nonlinear Wave Simulation on the Xeon Phi Knights Landing Processor

Directory of Open Access Journals (Sweden)

Hristov Ivan

2018-01-01

Full Text Available We consider an interesting from computational point of view standing wave simulation by solving coupled 2D perturbed Sine-Gordon equations. We make an OpenMP realization which explores both thread and SIMD levels of parallelism. We test the OpenMP program on two different energy equivalent Intel architectures: 2× Xeon E5-2695 v2 processors, (code-named “Ivy Bridge-EP” in the Hybrilit cluster, and Xeon Phi 7250 processor (code-named “Knights Landing” (KNL. The results show 2 times better performance on KNL processor.

HTGR core seismic analysis using an array processor

International Nuclear Information System (INIS)

Shatoff, H.; Charman, C.M.

1983-01-01

A Floating Point Systems array processor performs nonlinear dynamic analysis of the high-temperature gas-cooled reactor (HTGR) core with significant time and cost savings. The graphite HTGR core consists of approximately 8000 blocks of various shapes which are subject to motion and impact during a seismic event. Two-dimensional computer programs (CRUNCH2D, MCOCO) can perform explicit step-by-step dynamic analyses of up to 600 blocks for time-history motions. However, use of two-dimensional codes was limited by the large cost and run times required. Three-dimensional analysis of the entire core, or even a large part of it, had been considered totally impractical. Because of the needs of the HTGR core seismic program, a Floating Point Systems array processor was used to enhance computer performance of the two-dimensional core seismic computer programs, MCOCO and CRUNCH2D. This effort began by converting the computational algorithms used in the codes to a form which takes maximum advantage of the parallel and pipeline processors offered by the architecture of the Floating Point Systems array processor. The subsequent conversion of the vectorized FORTRAN coding to the array processor required a significant programming effort to make the system work on the General Atomic (GA) UNIVAC 1100/82 host. These efforts were quite rewarding, however, since the cost of running the codes has been reduced approximately 50-fold and the time threefold. The core seismic analysis with large two-dimensional models has now become routine and extension to three-dimensional analysis is feasible. These codes simulate the one-fifth-scale full-array HTGR core model. This paper compares the analysis with the test results for sine-sweep motion

A single chip pulse processor for nuclear spectroscopy

International Nuclear Information System (INIS)

Hilsenrath, F.; Bakke, J.C.; Voss, H.D.

1985-01-01

A high performance digital pulse processor, integrated into a single gate array microcircuit, has been developed for spaceflight applications. The new approach takes advantage of the latest CMOS high speed A/D flash converters and low-power gated logic arrays. The pulse processor measures pulse height, pulse area and the required timing information (e.g. multi detector coincidence and pulse pile-up detection). The pulse processor features high throughput rate (e.g. 0.5 Mhz for 2 usec gausssian pulses) and improved differential linearity (e.g. + or - 0.2 LSB for a + or - 1 LSB A/D). Because of the parallel digital architecture of the device, the interface is microprocessor bus compatible. A satellite flight application of this module is presented for use in the X-ray imager and high energy particle spectrometers of the PEM experiment on the Upper Atmospheric Research Satellite

The hardware track finder processor in CMS at CERN

CERN Document Server

Kluge, A

1997-01-01

The work covers the design of the Track Finder Processor in the high energy experiment CMS (Compact Muon Solenoid, planned for 2005) at CERN/Geneva. The task of this processor is to identify muons and measure their transverse momentum. The track finder processor makes it possible to determine the physical relevance of each high energetic collision and to forward only interesting data to the data an alysis units. Data of more than two hundred thousand detector cells are used to determine the location of muons and measure their transverse momentum. Each 25 ns a new data set is generated. Measurem ent of location and transverse momentum of the muons can be terminated within 350 ns by using an ASIC (Application Specific Integrated Circuit). A pipeline architecture processes new data sets with th e required data rate of 40 MHz to ensure dead time free operation. In the framework of this study specifications and the overall concept of the track finder processor were worked out in detail. Simul ations were performed...

UA1 upgrade first-level calorimeter trigger processor

International Nuclear Information System (INIS)

Bains, N.; Charlton, D.; Ellis, N.; Garvey, J.; Gregory, J.; Jimack, M.P.; Jovanovic, P.; Kenyon, I.R.; Baird, S.A.; Campbell, D.; Cawthraw, M.; Coughlan, J.; Flynn, P.; Galagedera, S.; Grayer, G.; Halsall, R.; Shah, T.P.; Stephens, R.; Eisenhandler, E.; Fensome, I.; Landon, M.

1989-01-01

A new first-level trigger processor has been built for the UA1 experiment on the Cern SppS Collider. The processor exploits the fine granularity of the new UA1 uranium-TMP calorimeter to improve the selectivity of the trigger. The new electron trigger has improved hadron jet rejection, achieved by requiring low energy deposition around the electromagnetic cluster. A missing transverse energy trigger and a total energy trigger have also been implemented. (orig.)

Real-time portable system for fabric defect detection using an ARM processor

Science.gov (United States)

Fernandez-Gallego, J. A.; Yañez-Puentes, J. P.; Ortiz-Jaramillo, B.; Alvarez, J.; Orjuela-Vargas, S. A.; Philips, W.

2012-06-01

Modern textile industry seeks to produce textiles as little defective as possible since the presence of defects can decrease the final price of products from 45% to 65%. Automated visual inspection (AVI) systems, based on image analysis, have become an important alternative for replacing traditional inspections methods that involve human tasks. An AVI system gives the advantage of repeatability when implemented within defined constrains, offering more objective and reliable results for particular tasks than human inspection. Costs of automated inspection systems development can be reduced using modular solutions with embedded systems, in which an important advantage is the low energy consumption. Among the possibilities for developing embedded systems, the ARM processor has been explored for acquisition, monitoring and simple signal processing tasks. In a recent approach we have explored the use of the ARM processor for defects detection by implementing the wavelet transform. However, the computation speed of the preprocessing was not yet sufficient for real time applications. In this approach we significantly improve the preprocessing speed of the algorithm, by optimizing matrix operations, such that it is adequate for a real time application. The system was tested for defect detection using different defect types. The paper is focused in giving a detailed description of the basis of the algorithm implementation, such that other algorithms may use of the ARM operations for fast implementations.

Application of the Computer Capacity to the Analysis of Processors Evolution

OpenAIRE

Ryabko, Boris; Rakitskiy, Anton

2017-01-01

The notion of computer capacity was proposed in 2012, and this quantity has been estimated for computers of different kinds. In this paper we show that, when designing new processors, the manufacturers change the parameters that affect the computer capacity. This allows us to predict the values of parameters of future processors. As the main example we use Intel processors, due to the accessibility of detailed description of all their technical characteristics.

Optimal processor for malfunction detection in operating nuclear reactor

International Nuclear Information System (INIS)

Ciftcioglu, O.

1990-01-01

An optimal processor for diagnosing operational transients in a nuclear reactor is described. Basic design of the processor involves real-time processing of noise signal obtained from a particular in core sensor and the optimality is based on minimum alarm failure in contrast to minimum false alarm criterion from the safe and reliable plant operation viewpoint

An updated program-controlled analog processor, model AP-006, for semiconductor detector spectrometers

International Nuclear Information System (INIS)

Shkola, N.F.; Shevchenko, Yu.A.

1989-01-01

An analog processor, model AP-006, is reported. The processor is a development of a series of spectrometric units based on a shaper of the type 'DL dif +TVS+gated ideal integrator'. Structural and circuits design features are described. The results of testing the processor in a setup with a Si(Li) detecting unit over an input count-rate range of up to 5x10 5 cps are presented. Processor applications are illustrated. (orig.)

Intelligent trigger processor for the crystal box

International Nuclear Information System (INIS)

Sanders, G.H.; Butler, H.S.; Cooper, M.D.

1981-01-01

A large solid angle modular NaI(Tl) detector with 432 phototubes and 88 trigger scintillators is being used to search simultaneously for three lepton flavor changing decays of muon. A beam of up to 10 6 muons stopping per second with a 6% duty factor would yield up to 1000 triggers per second from random triple coincidences. A reduction of the trigger rate to 10 Hz is required from a hardwired primary trigger processor described in this paper. Further reduction to < 1 Hz is achieved by a microprocessor based secondary trigger processor. The primary trigger hardware imposes voter coincidence logic, stringent timing requirements, and a non-adjacency requirement in the trigger scintillators defined by hardwired circuits. Sophisticated geometric requirements are imposed by a PROM-based matrix logic, and energy and vector-momentum cuts are imposed by a hardwired processor using LSI flash ADC's and digital arithmetic loci. The secondary trigger employs four satellite microprocessors to do a sparse data scan, multiplex the data acquisition channels and apply additional event filtering

40 CFR 80.840 - What requirements apply to transmix processors?

Science.gov (United States)

2010-07-01

... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Toxics Gasoline Toxics Performance Requirements § 80.840 What requirements apply to transmix processors? Any transmix processor who produces gasoline or gasoline blendstock from transmix, or recovers gasoline or gasoline blendstock from transmix...

The Serial Link Processor for the Fast TracKer (FTK) processor at ATLAS

CERN Document Server

Biesuz, Nicolo Vladi; The ATLAS collaboration; Luciano, Pierluigi; Magalotti, Daniel; Rossi, Enrico

2015-01-01

The Associative Memory (AM) system of the Fast Tracker (FTK) processor has been designed to perform pattern matching using the hit information of the ATLAS experiment silicon tracker. The AM is the heart of FTK and is mainly based on the use of ASICs (AM chips) designed on purpose to execute pattern matching with a high degree of parallelism. It finds track candidates at low resolution that are seeds for a full resolution track fitting. To solve the very challenging data traffic problems inside FTK, multiple board and chip designs have been performed. The currently proposed solution is named the “Serial Link Processor” and is based on an extremely powerful network of 2 Gb/s serial links. This paper reports on the design of the Serial Link Processor consisting of two types of boards, the Local Associative Memory Board (LAMB), a mezzanine where the AM chips are mounted, and the Associative Memory Board (AMB), a 9U VME board which holds and exercises four LAMBs. We report on the performance of the intermedia...

The Serial Link Processor for the Fast TracKer (FTK) processor at ATLAS

CERN Document Server

Andreani, A; The ATLAS collaboration; Beccherle, R; Beretta, M; Cipriani, R; Citraro, S; Citterio, M; Colombo, A; Crescioli, F; Dimas, D; Donati, S; Giannetti, P; Kordas, K; Lanza, A; Liberali, V; Luciano, P; Magalotti, D; Neroutsos, P; Nikolaidis, S; Piendibene, M; Sakellariou, A; Shojaii, S; Sotiropoulou, C-L; Stabile, A

2014-01-01

The Associative Memory (AM) system of the FTK processor has been designed to perform pattern matching using the hit information of the ATLAS silicon tracker. The AM is the heart of the FTK and it finds track candidates at low resolution that are seeds for a full resolution track fitting. To solve the very challenging data traffic problems inside the FTK, multiple designs and tests have been performed. The currently proposed solution is named the “Serial Link Processor” and is based on an extremely powerful network of 2 Gb/s serial links. This paper reports on the design of the Serial Link Processor consisting of the AM chip, an ASIC designed and optimized to perform pattern matching, and two types of boards, the Local Associative Memory Board (LAMB), a mezzanine where the AM chips are mounted, and the Associative Memory Board (AMB), a 9U VME board which holds and exercises four LAMBs. Special relevance will be given to the AMchip design that includes two custom cells optimized for low consumption. We repo...

The Serial Link Processor for the Fast TracKer (FTK) processor at ATLAS

CERN Document Server

Biesuz, Nicolo Vladi; The ATLAS collaboration; Luciano, Pierluigi; Magalotti, Daniel; Rossi, Enrico

2015-01-01

The Associative Memory (AM) system of the Fast Tracker (FTK) processor has been designed to perform pattern matching using the hit information of the ATLAS experiment silicon tracker. The AM is the heart of FTK and is mainly based on the use of ASICs (AM chips) designed to execute pattern matching with a high degree of parallelism. The AM system finds track candidates at low resolution that are seeds for a full resolution track fitting. To solve the very challenging data traffic problems inside FTK, multiple board and chip designs have been performed. The currently proposed solution is named the “Serial Link Processor” and is based on an extremely powerful network of 828 2 Gbit/s serial links for a total in/out bandwidth of 56 Gb/s. This paper reports on the design of the Serial Link Processor consisting of two types of boards, the Local Associative Memory Board (LAMB), a mezzanine where the AM chips are mounted, and the Associative Memory Board (AMB), a 9U VME board which holds and exercises four LAMBs. ...

Safe and Efficient Support for Embeded Multi-Processors in ADA

Science.gov (United States)

Ruiz, Jose F.

2010-08-01

New software demands increasing processing power, and multi-processor platforms are spreading as the answer to achieve the required performance. Embedded real-time systems are also subject to this trend, but in the case of real-time mission-critical systems, the properties of reliability, predictability and analyzability are also paramount. The Ada 2005 language defined a subset of its tasking model, the Ravenscar profile, that provides the basis for the implementation of deterministic and time analyzable applications on top of a streamlined run-time system. This Ravenscar tasking profile, originally designed for single processors, has proven remarkably useful for modelling verifiable real-time single-processor systems. This paper proposes a simple extension to the Ravenscar profile to support multi-processor systems using a fully partitioned approach. The implementation of this scheme is simple, and it can be used to develop applications amenable to schedulability analysis.

A programmable systolic trigger processor for FERA bus data

International Nuclear Information System (INIS)

Appelquist, G.; Hovander, B.; Sellden, B.; Bohm, C.

1992-09-01

A generic CAMAC based trigger processor module for fast processing of large amounts of ADC data, has been designed. This module has been realised using complex programmable gate arrays (LCAs from XILINX). The gate arrays have been connected to memories and multipliers in such a way that different gate array configurations can cover a wide range of module applications. Using this module, it is possible to construct complex trigger processors. The module uses both the fast ECL FERA bus and the CAMAC bus for inputs and outputs. The latter, however, is primarily used for set-up and control but may also be used for data output. Large numbers of ADCs can be served by a hierarchical arrangement of trigger processor modules, processing ADC data with pipe-line arithmetics producing the final result at the apex of the pyramid. The trigger decision will be transmitted to the data acquisition system via a logic signal while numeric results may be extracted by the CAMAC controller. The trigger processor was originally developed for the proposed neutral particle search experiment at CERN, NUMASS. There it was designed to serve as a second level trigger processor. It was required to correct all ADC raw data for efficiency and pedestal, calculate the total calorimeter energy, obtain the optimal time of flight data and calculate the particle mass. A suitable mass cut would then deliver the trigger decision. More complex triggers were also considered. (au)

7 CFR 1215.14 - Processor.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Processor. 1215.14 Section 1215.14 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... CONSUMER INFORMATION Popcorn Promotion, Research, and Consumer Information Order Definitions § 1215.14...

Performance of Artificial Intelligence Workloads on the Intel Core 2 Duo Series Desktop Processors

Directory of Open Access Journals (Sweden)

Abdul Kareem PARCHUR

2010-12-01

Full Text Available As the processor architecture becomes more advanced, Intel introduced its Intel Core 2 Duo series processors. Performance impact on Intel Core 2 Duo processors are analyzed using SPEC CPU INT 2006 performance numbers. This paper studied the behavior of Artificial Intelligence (AI benchmarks on Intel Core 2 Duo series processors. Moreover, we estimated the task completion time (TCT @1 GHz, @2 GHz and @3 GHz Intel Core 2 Duo series processors frequency. Our results show the performance scalability in Intel Core 2 Duo series processors. Even though AI benchmarks have similar execution time, they have dissimilar characteristics which are identified using principal component analysis and dendogram. As the processor frequency increased from 1.8 GHz to 3.167 GHz the execution time is decreased by ~370 sec for AI workloads. In the case of Physics/Quantum Computing programs it was ~940 sec.

Photonics and Fiber Optics Processor Lab

Data.gov (United States)

Federal Laboratory Consortium — The Photonics and Fiber Optics Processor Lab develops, tests and evaluates high speed fiber optic network components as well as network protocols. In addition, this...

Slowdown in the $M/M/1$ discriminatory processor-sharing queue

NARCIS (Netherlands)

Cheung, S.K.; Kim, Bara; Kim, Jeongsim

2008-01-01

We consider a queue with multiple K job classes, Poisson arrivals, and exponentially distributed required service times in which a single processor serves according to the discriminatory processor-sharing (DPS) discipline. For this queue, we obtain the first and second moments of the slowdown, which

Online Fastbus processor for LEP

International Nuclear Information System (INIS)

Mueller, H.

1986-01-01

The author describes the online computing aspects of Fastbus systems using a processor module which has been developed at CERN and is now available commercially. These General Purpose Master/Slaves (GPMS) are based on 68000/10 (or optionally 68020/68881) processors. Applications include use as event-filters (DELPHI), supervisory controllers, Fastbus stand-alone diagnostic tools, and multiprocessor array components. The direct mapping of single, 32-bit assembly instructions to execute Fastbus protocols makes the use of a GPM both simple and flexible. Loosely coupled processing in Fastbus networks is possible between GPM's as they support access semaphores and use a two port memory as I/O buffer for Fastbus. Both master and slave-ports support block transfers up to 20 Mbytes/s. The CERN standard Fastbus software and the MoniCa symbolic debugging monitor are available on the GPM with real time, multiprocessing support. (Auth.)

Invasive tightly coupled processor arrays

CERN Document Server

LARI, VAHID

2016-01-01

This book introduces new massively parallel computer (MPSoC) architectures called invasive tightly coupled processor arrays. It proposes strategies, architecture designs, and programming interfaces for invasive TCPAs that allow invading and subsequently executing loop programs with strict requirements or guarantees of non-functional execution qualities such as performance, power consumption, and reliability. For the first time, such a configurable processor array architecture consisting of locally interconnected VLIW processing elements can be claimed by programs, either in full or in part, using the principle of invasive computing. Invasive TCPAs provide unprecedented energy efficiency for the parallel execution of nested loop programs by avoiding any global memory access such as GPUs and may even support loops with complex dependencies such as loop-carried dependencies that are not amenable to parallel execution on GPUs. For this purpose, the book proposes different invasion strategies for claiming a desire...

A Modular Pipelined Processor for High Resolution Gamma-Ray Spectroscopy

Science.gov (United States)

Veiga, Alejandro; Grunfeld, Christian

2016-02-01

The design of a digital signal processor for gamma-ray applications is presented in which a single ADC input can simultaneously provide temporal and energy characterization of gamma radiation for a wide range of applications. Applying pipelining techniques, the processor is able to manage and synchronize very large volumes of streamed real-time data. Its modular user interface provides a flexible environment for experimental design. The processor can fit in a medium-sized FPGA device operating at ADC sampling frequency, providing an efficient solution for multi-channel applications. Two experiments are presented in order to characterize its temporal and energy resolution.

A survey of Tumult, a real-time multi-processor system

International Nuclear Information System (INIS)

Jansen, P.G.

1986-01-01

Tumult (Twente University MULTi processor system) is the name of an ongoing project aiming at the design and implementation of a modular extendible multiprocessor system. All memory is distributed and processors communicate in parallel via a fast and reliable local switching network instead of a shared bus. A distributed real-time operating system is being designed and implemented, consisting of a multi-tasking subsystem per processor. Processes can communicate via a message passing mechanism. Communication links and processes are dynamically created and disposed by the application. In this article a brief description of the system is given; communication aspects are emphasized. (Auth.)

Reaction-diffusion path planning in a hybrid chemical and cellular-automaton processor

International Nuclear Information System (INIS)

Adamatzky, Andrew; Lacy Costello, Benjamin de

2003-01-01

To find the shortest collision-free path in a room containing obstacles we designed a chemical processor and coupled it with a cellular-automaton processor. In the chemical processor obstacles are represented by sites of high concentration of potassium iodide and a planar substrate is saturated with palladium chloride. Potassium iodide diffuses into the substrate and reacts with palladium chloride. A dark coloured precipitate of palladium iodide is formed almost everywhere except sites where two or more diffusion wavefronts collide. The less coloured sites are situated at the furthest distance from obstacles. Thus, the chemical processor develops a repulsive field, generated by obstacles. A snapshot of the chemical processor is inputted to a cellular automaton. The automaton behaves like a discrete excitable media; also, every cell of the automaton is supplied with a pointer that shows an origin of the cell's excitation. The excitation spreads along the cells corresponding to precipitate depleted sites of the chemical processor. When the destination-site is excited, waves travel on the lattice and update the orientations of the pointers. Thus, the automaton constructs a spanning tree, made of pointers, that guides a traveler towards the destination point. Thus, the automaton medium generates an attractive field and combination of this attractive field with the repulsive field, generated by the chemical processor, provides us with a solution of the collision-free path problem

A VAX-FPS Loosely-Coupled Array of Processors

International Nuclear Information System (INIS)

Grosdidier, G.

1987-03-01

The main features of a VAX-FPS Loosely-Coupled Array of Processors (LCAP) set-up and the implementation of a High Energy Physics tracking program for off-line purposes will be described. This LCAP consists of a VAX 11/750 host and two FPS 64 bit attached processors. Before analyzing the performances of this LCAP, its characteristics will be outlined, especially from a user's point of vue, and will be briefly compared to those of the IBM-FPS LCAP

Reducing Competitive Cache Misses in Modern Processor Architectures

OpenAIRE

Prisagjanec, Milcho; Mitrevski, Pece

2017-01-01

The increasing number of threads inside the cores of a multicore processor, and competitive access to the shared cache memory, become the main reasons for an increased number of competitive cache misses and performance decline. Inevitably, the development of modern processor architectures leads to an increased number of cache misses. In this paper, we make an attempt to implement a technique for decreasing the number of competitive cache misses in the first level of cache memory. This tec...

16-Bit RISC Processor Design for Convolution Application

OpenAIRE

Anand Nandakumar Shardul

2013-01-01

In this project, we propose a 16-bit non-pipelined RISC processor, which is used for signal processing applications. The processor consists of the blocks, namely, program counter, clock control unit, ALU, IDU and registers. Advantageous architectural modifications have been made in the incremented circuit used in program counter and carry select adder unit of the ALU in the RISC CPU core. Furthermore, a high speed and low power modified modifies multiplier has been designed and introduced in ...

Modal Processor Effects Inspired by Hammond Tonewheel Organs

Directory of Open Access Journals (Sweden)

Kurt James Werner

2016-06-01

Full Text Available In this design study, we introduce a novel class of digital audio effects that extend the recently introduced modal processor approach to artificial reverberation and effects processing. These pitch and distortion processing effects mimic the design and sonics of a classic additive-synthesis-based electromechanical musical instrument, the Hammond tonewheel organ. As a reverb effect, the modal processor simulates a room response as the sum of resonant filter responses. This architecture provides precise, interactive control over the frequency, damping, and complex amplitude of each mode. Into this framework, we introduce two types of processing effects: pitch effects inspired by the Hammond organ’s equal tempered “tonewheels”, “drawbar” tone controls, vibrato/chorus circuit, and distortion effects inspired by the pseudo-sinusoidal shape of its tonewheels and electromagnetic pickup distortion. The result is an effects processor that imprints the Hammond organ’s sonics onto any audio input.

Safety-critical Java on a time-predictable processor

DEFF Research Database (Denmark)

Korsholm, Stephan E.; Schoeberl, Martin; Puffitsch, Wolfgang

2015-01-01

For real-time systems the whole execution stack needs to be time-predictable and analyzable for the worst-case execution time (WCET). This paper presents a time-predictable platform for safety-critical Java. The platform consists of (1) the Patmos processor, which is a time-predictable processor......; (2) a C compiler for Patmos with support for WCET analysis; (3) the HVM, which is a Java-to-C compiler; (4) the HVM-SCJ implementation which supports SCJ Level 0, 1, and 2 (for both single and multicore platforms); and (5) a WCET analysis tool. We show that real-time Java programs translated to C...... and compiled to a Patmos binary can be analyzed by the AbsInt aiT WCET analysis tool. To the best of our knowledge the presented system is the second WCET analyzable real-time Java system; and the first one on top of a RISC processor....

Stepping motor control processor reference manual. Volume I

International Nuclear Information System (INIS)

Holloway, F.W.; VanArsdall, P.J.; Suski, G.J.; Gant, R.G.; Rash, M.

1980-01-01

This manual is intended to serve several purposes. The first goal is to describe the capabilities and operation of the SMC processor package from an operator or user point of view. Secondly, the manual will describe in some detail the basic hardware elements and how they can be used effectively to implement a step motor control system. Practical information on the use, installation and checkout of the hardware set is presented in the following sections along with programming suggestions. Available related system software is described in this manual for reference and as an aid in understanding the system architecture. Section two presents an overview and operations manual of the SMC processor describing its composition and functional capabilities. Section three contains hardware descriptions in some detail for the LLL-designed hardware used in the SMC processor. Basic theory of operation and important features are explained

The Interface Between Redundant Processor Modules Of Safety Grade PLC Using Mass Storage DPRAM

International Nuclear Information System (INIS)

Hwang, Sung Jae; Song, Seong Hwan; No, Young Hun; Yun, Dong Hwa; Park, Gang Min; Kim, Min Gyu; Choi, Kyung Chul; Lee, Ui Taek

2010-01-01

Processor module of safety grade PLC (hereinafter called as POSAFE-Q) developed by POSCO ICT provides high reliability and safety. However, POSAFEQ would have suffered a malfunction when we think taking place of abnormal operation by exceptional environmental. POSAFE-Q would not able to conduct its function normally in such case. To prevent these situations, the necessity of redundant processor module has been raised. Therefore, redundant processor module, NCPU-2Q, has been developed which has not only functions of single processor module with high reliability and safety but also functions of redundant processor

The performances of coffee processors and coffee market in the Republic of Serbia

Directory of Open Access Journals (Sweden)

Nuševa Daniela

2017-01-01

Full Text Available The main aim of this paper is to investigate the performances of coffee processors and coffee market in Serbia based on the market concentration analysis, profitability analysis, and profitability determinants analysis. The research was based on the sample of 40 observations of coffee processing companies divided into two groups: large and small coffee processors. The results indicate that two large coffee processors have dominant market share. Even though the Serbian coffee market is an oligopolistic, profitability analysis indicates that small coffee processors have a significant better profitability ratio than large coffee processors. Furthermore, results show that profitability ratio is positively related to the inventory turnover and negatively related to the market share.

Hardware Synchronization for Embedded Multi-Core Processors

DEFF Research Database (Denmark)

Stoif, Christian; Schoeberl, Martin; Liccardi, Benito

2011-01-01

Multi-core processors are about to conquer embedded systems — it is not the question of whether they are coming but how the architectures of the microcontrollers should look with respect to the strict requirements in the field. We present the step from one to multiple cores in this paper, establi......Multi-core processors are about to conquer embedded systems — it is not the question of whether they are coming but how the architectures of the microcontrollers should look with respect to the strict requirements in the field. We present the step from one to multiple cores in this paper...

The microelectronic and photonic test bed RISC processor and DRAM memory stack experiments

International Nuclear Information System (INIS)

Clark, K.A.; Meehan, T.J.

1999-01-01

This paper reports on the on-orbit data obtained from the MPTB RISC Processor Experiment, containing three Integrated Device Technologies R3081 processors. During operations, nine SEUs were observed in the processors, and four SEUs were observed in the memory and/or support circuitry. (authors)

Digital image processing software system using an array processor

International Nuclear Information System (INIS)

Sherwood, R.J.; Portnoff, M.R.; Journeay, C.H.; Twogood, R.E.

1981-01-01

A versatile array processor-based system for general-purpose image processing was developed. At the heart of this system is an extensive, flexible software package that incorporates the array processor for effective interactive image processing. The software system is described in detail, and its application to a diverse set of applications at LLNL is briefly discussed. 4 figures, 1 table

Embedded Processor Based Automatic Temperature Control of VLSI Chips

Directory of Open Access Journals (Sweden)

Narasimha Murthy Yayavaram

2009-01-01

Full Text Available This paper presents embedded processor based automatic temperature control of VLSI chips, using temperature sensor LM35 and ARM processor LPC2378. Due to the very high packing density, VLSI chips get heated very soon and if not cooled properly, the performance is very much affected. In the present work, the sensor which is kept very near proximity to the IC will sense the temperature and the speed of the fan arranged near to the IC is controlled based on the PWM signal generated by the ARM processor. A buzzer is also provided with the hardware, to indicate either the failure of the fan or overheating of the IC. The entire process is achieved by developing a suitable embedded C program.

Modelling sequentially scored item responses

NARCIS (Netherlands)

Akkermans, W.

2000-01-01

The sequential model can be used to describe the variable resulting from a sequential scoring process. In this paper two more item response models are investigated with respect to their suitability for sequential scoring: the partial credit model and the graded response model. The investigation is

gFEX, the ATLAS Calorimeter Level-1 Real Time Processor

CERN Document Server

AUTHOR|(SzGeCERN)759889; The ATLAS collaboration; Begel, Michael; Chen, Hucheng; Lanni, Francesco; Takai, Helio; Wu, Weihao

2016-01-01

The global feature extractor (gFEX) is a component of the Level-1 Calorimeter trigger Phase-I upgrade for the ATLAS experiment. It is intended to identify patterns of energy associated with the hadronic decays of high momentum Higgs, W, & Z bosons, top quarks, and exotic particles in real time at the LHC crossing rate. The single processor board will be packaged in an Advanced Telecommunications Computing Architecture (ATCA) module and implemented as a fast reconfigurable processor based on three Xilinx Vertex Ultra-scale FPGAs. The board will receive coarse-granularity information from all the ATLAS calorimeters on 276 optical fibers with the data transferred at the 40 MHz Large Hadron Collider (LHC) clock frequency. The gFEX will be controlled by a single system-on-chip processor, ZYNQ, that will be used to configure all the processor Field-Programmable Gate Array (FPGAs), monitor board health, and interface to external signals. Now, the pre-prototype board which includes one ZYNQ and one Vertex-7 FPGA ...

gFEX, the ATLAS Calorimeter Level 1 Real Time Processor

CERN Document Server

Tang, Shaochun; The ATLAS collaboration

2015-01-01

The global feature extractor (gFEX) is a component of the Level-1Calorimeter trigger Phase-I upgrade for the ATLAS experiment. It is intended to identify patterns of energy associated with the hadronic decays of high momentum Higgs, W, & Z bosons, top quarks, and exotic particles in real time at the LHC crossing rate. The single processor board will be packaged in an Advanced Telecommunications Computing Architecture (ATCA) module and implemented as a fast reconfigurable processor based on three Xilinx Ultra-scale FPGAs. The board will receive coarse-granularity information from all the ATLAS calorimeters on 264 optical fibers with the data transferred at the 40 MHz LHC clock frequency. The gFEX will be controlled by a single system-on-chip processor, ZYNQ, that will be used to configure all the processor FPGAs, monitor board health, and interface to external signals. Now, the pre-prototype board which includes one ZYNQ and one Vertex-7 FPGA has been designed for testing and verification. The performance ...

Scientific programming on massively parallel processor CP-PACS

International Nuclear Information System (INIS)

Boku, Taisuke

1998-01-01

The massively parallel processor CP-PACS takes various problems of calculation physics as the object, and it has been designed so that its architecture has been devised to do various numerical processings. In this report, the outline of the CP-PACS and the example of programming in the Kernel CG benchmark in NAS Parallel Benchmarks, version 1, are shown, and the pseudo vector processing mechanism and the parallel processing tuning of scientific and technical computation utilizing the three-dimensional hyper crossbar net, which are two great features of the architecture of the CP-PACS are described. As for the CP-PACS, the PUs based on RISC processor and added with pseudo vector processor are used. Pseudo vector processing is realized as the loop processing by scalar command. The features of the connection net of PUs are explained. The algorithm of the NPB version 1 Kernel CG is shown. The part that takes the time for processing most in the main loop is the product of matrix and vector (matvec), and the parallel processing of the matvec is explained. The time for the computation by the CPU is determined. As the evaluation of the performance, the evaluation of the time for execution, the short vector processing of pseudo vector processor based on slide window, and the comparison with other parallel computers are reported. (K.I.)

Investigation of Large Scale Cortical Models on Clustered Multi-Core Processors

Science.gov (United States)

2013-02-01

Playstation 3 with 6 available SPU cores outperforms the Intel Xeon processor (with 4 cores) by about 1.9 times for the HTM model and by 2.4 times...runtime breakdowns of the HTM and Dean models respectively on the Cell processor (on the Playstation 3) and the Intel Xeon processor ( 4 thread...YOUR FORM TO THE ABOVE ORGANIZATION. 1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE 3. DATES COVERED (From - To) 4 . TITLE AND SUBTITLE 5a. CONTRACT NUMBER

Automation of ORIGEN2 calculations for the transuranic waste baseline inventory database using a pre-processor and a post-processor

International Nuclear Information System (INIS)

Liscum-Powell, J.

1997-06-01

The purpose of the work described in this report was to automate ORIGEN2 calculations for the Waste Isolation Pilot Plant (WIPP) Transuranic Waste Baseline Inventory Database (WTWBID); this was done by developing a pre-processor to generate ORIGEN2 input files from WWBID inventory files and a post-processor to remove excess information from the ORIGEN2 output files. The calculations performed with ORIGEN2 estimate the radioactive decay and buildup of various radionuclides in the waste streams identified in the WTWBID. The resulting radionuclide inventories are needed for performance assessment calculations for the WIPP site. The work resulted in the development of PreORG, which requires interaction with the user to generate ORIGEN2 input files on a site-by-site basis, and PostORG, which processes ORIGEN2 output into more manageable files. Both programs are written in the FORTRAN 77 computer language. After running PreORG, the user will run ORIGEN2 to generate the desired data; upon completion of ORIGEN2 calculations, the user can run PostORG to process the output to make it more manageable. All the programs run on a 386 PC or higher with a math co-processor or a computer platform running under VMS operating system. The pre- and post-processors for ORIGEN2 were generated for use with Rev. 1 data of the WTWBID and can also be used with Rev. 2 and 3 data of the TWBID (Transuranic Waste Baseline Inventory Database)

A design of a computer complex including vector processors

International Nuclear Information System (INIS)

Asai, Kiyoshi

1982-12-01

We, members of the Computing Center, Japan Atomic Energy Research Institute have been engaged for these six years in the research of adaptability of vector processing to large-scale nuclear codes. The research has been done in collaboration with researchers and engineers of JAERI and a computer manufacturer. In this research, forty large-scale nuclear codes were investigated from the viewpoint of vectorization. Among them, twenty-six codes were actually vectorized and executed. As the results of the investigation, it is now estimated that about seventy percents of nuclear codes and seventy percents of our total amount of CPU time of JAERI are highly vectorizable. Based on the data obtained by the investigation, (1)currently vectorizable CPU time, (2)necessary number of vector processors, (3)necessary manpower for vectorization of nuclear codes, (4)computing speed, memory size, number of parallel 1/0 paths, size and speed of 1/0 buffer of vector processor suitable for our applications, (5)necessary software and operational policy for use of vector processors are discussed, and finally (6)a computer complex including vector processors is presented in this report. (author)

Parallel computation for distributed parameter system-from vector processors to Adena computer

Energy Technology Data Exchange (ETDEWEB)

Nogi, T

1983-04-01

Research on advanced parallel hardware and software architectures for very high-speed computation deserves and needs more support and attention to fulfil its promise. Novel architectures for parallel processing are being made ready. Architectures for parallel processing can be roughly divided into two groups. One is a vector processor in which a single central processing unit involves multiple vector-arithmetic registers. The other is a processor array in which slave processors are connected to a host processor to perform parallel computation. In this review, the concept and data structure of the Adena (alternating-direction edition nexus array) architecture, which is conformable to distributed-parameter simulation algorithms, are described. 5 references.

Digital control card based on digital signal processor

International Nuclear Information System (INIS)

Hou Shigang; Yin Zhiguo; Xia Le

2008-01-01

A digital control card based on digital signal processor was developed. Two Freescale DSP-56303 processors were utilized to achieve 3 channels proportional- integral-differential regulations. The card offers high flexibility for 100 MeV cyclotron RF system development. It was used as feedback controller in low level radio frequency control prototype, with the feedback gain parameters continuously adjustable. By using high precision analog to digital converter with 500 kHz sampling rate, a regulation bandwidth of 20 kHz was achieved. (authors)

Treecode with a Special-Purpose Processor

Science.gov (United States)

Makino, Junichiro

1991-08-01

We describe an implementation of the modified Barnes-Hut tree algorithm for a gravitational N-body calculation on a GRAPE (GRAvity PipE) backend processor. GRAPE is a special-purpose computer for N-body calculations. It receives the positions and masses of particles from a host computer and then calculates the gravitational force at each coordinate specified by the host. To use this GRAPE processor with the hierarchical tree algorithm, the host computer must maintain a list of all nodes that exert force on a particle. If we create this list for each particle of the system at each timestep, the number of floating-point operations on the host and that on GRAPE would become comparable, and the increased speed obtained by using GRAPE would be small. In our modified algorithm, we create a list of nodes for many particles. Thus, the amount of the work required of the host is significantly reduced. This algorithm was originally developed by Barnes in order to vectorize the force calculation on a Cyber 205. With this algorithm, the computing time of the force calculation becomes comparable to that of the tree construction, if the GRAPE backend processor is sufficiently fast. The obtained speed-up factor is 30 to 50 for a RISC-based host computer and GRAPE-1A with a peak speed of 240 Mflops.

Token-Aware Completion Functions for Elastic Processor Verification

Directory of Open Access Journals (Sweden)

Sudarshan K. Srinivasan

2009-01-01

Full Text Available We develop a formal verification procedure to check that elastic pipelined processor designs correctly implement their instruction set architecture (ISA specifications. The notion of correctness we use is based on refinement. Refinement proofs are based on refinement maps, which—in the context of this problem—are functions that map elastic processor states to states of the ISA specification model. Data flow in elastic architectures is complicated by the insertion of any number of buffers in any place in the design, making it hard to construct refinement maps for elastic systems in a systematic manner. We introduce token-aware completion functions, which incorporate a mechanism to track the flow of data in elastic pipelines, as a highly automated and systematic approach to construct refinement maps. We demonstrate the efficiency of the overall verification procedure based on token-aware completion functions using six elastic pipelined processor models based on the DLX architecture.

A light hydrocarbon fuel processor producing high-purity hydrogen

Science.gov (United States)

Löffler, Daniel G.; Taylor, Kyle; Mason, Dylan

This paper discusses the design process and presents performance data for a dual fuel (natural gas and LPG) fuel processor for PEM fuel cells delivering between 2 and 8 kW electric power in stationary applications. The fuel processor resulted from a series of design compromises made to address different design constraints. First, the product quality was selected; then, the unit operations needed to achieve that product quality were chosen from the pool of available technologies. Next, the specific equipment needed for each unit operation was selected. Finally, the unit operations were thermally integrated to achieve high thermal efficiency. Early in the design process, it was decided that the fuel processor would deliver high-purity hydrogen. Hydrogen can be separated from other gases by pressure-driven processes based on either selective adsorption or permeation. The pressure requirement made steam reforming (SR) the preferred reforming technology because it does not require compression of combustion air; therefore, steam reforming is more efficient in a high-pressure fuel processor than alternative technologies like autothermal reforming (ATR) or partial oxidation (POX), where the combustion occurs at the pressure of the process stream. A low-temperature pre-reformer reactor is needed upstream of a steam reformer to suppress coke formation; yet, low temperatures facilitate the formation of metal sulfides that deactivate the catalyst. For this reason, a desulfurization unit is needed upstream of the pre-reformer. Hydrogen separation was implemented using a palladium alloy membrane. Packed beds were chosen for the pre-reformer and reformer reactors primarily because of their low cost, relatively simple operation and low maintenance. Commercial, off-the-shelf balance of plant (BOP) components (pumps, valves, and heat exchangers) were used to integrate the unit operations. The fuel processor delivers up to 100 slm hydrogen >99.9% pure with <1 ppm CO, <3 ppm CO 2. The

Soft-core dataflow processor architecture optimised for radar signal processing: Article

CSIR Research Space (South Africa)

Broich, R

2014-10-01

Full Text Available Current radar signal processors lack either performance or flexibility. Custom soft-core processors exhibit potential in high-performance signal processing applications, yet remain relatively unexplored in research literature. In this paper, we use...

Merged ozone profiles from four MIPAS processors

Science.gov (United States)

Laeng, Alexandra; von Clarmann, Thomas; Stiller, Gabriele; Dinelli, Bianca Maria; Dudhia, Anu; Raspollini, Piera; Glatthor, Norbert; Grabowski, Udo; Sofieva, Viktoria; Froidevaux, Lucien; Walker, Kaley A.; Zehner, Claus

2017-04-01

The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) was an infrared (IR) limb emission spectrometer on the Envisat platform. Currently, there are four MIPAS ozone data products, including the operational Level-2 ozone product processed at ESA, with the scientific prototype processor being operated at IFAC Florence, and three independent research products developed by the Istituto di Fisica Applicata Nello Carrara (ISAC-CNR)/University of Bologna, Oxford University, and the Karlsruhe Institute of Technology-Institute of Meteorology and Climate Research/Instituto de Astrofísica de Andalucía (KIT-IMK/IAA). Here we present a dataset of ozone vertical profiles obtained by merging ozone retrievals from four independent Level-2 MIPAS processors. We also discuss the advantages and the shortcomings of this merged product. As the four processors retrieve ozone in different parts of the spectra (microwindows), the source measurements can be considered as nearly independent with respect to measurement noise. Hence, the information content of the merged product is greater and the precision is better than those of any parent (source) dataset. The merging is performed on a profile per profile basis. Parent ozone profiles are weighted based on the corresponding error covariance matrices; the error correlations between different profile levels are taken into account. The intercorrelations between the processors' errors are evaluated statistically and are used in the merging. The height range of the merged product is 20-55 km, and error covariance matrices are provided as diagnostics. Validation of the merged dataset is performed by comparison with ozone profiles from ACE-FTS (Atmospheric Chemistry Experiment-Fourier Transform Spectrometer) and MLS (Microwave Limb Sounder). Even though the merging is not supposed to remove the biases of the parent datasets, around the ozone volume mixing ratio peak the merged product is found to have a smaller (up to 0.1 ppmv

Keystone Business Models for Network Security Processors

Directory of Open Access Journals (Sweden)

Arthur Low

2013-07-01

Full Text Available Network security processors are critical components of high-performance systems built for cybersecurity. Development of a network security processor requires multi-domain experience in semiconductors and complex software security applications, and multiple iterations of both software and hardware implementations. Limited by the business models in use today, such an arduous task can be undertaken only by large incumbent companies and government organizations. Neither the “fabless semiconductor” models nor the silicon intellectual-property licensing (“IP-licensing” models allow small technology companies to successfully compete. This article describes an alternative approach that produces an ongoing stream of novel network security processors for niche markets through continuous innovation by both large and small companies. This approach, referred to here as the "business ecosystem model for network security processors", includes a flexible and reconfigurable technology platform, a “keystone” business model for the company that maintains the platform architecture, and an extended ecosystem of companies that both contribute and share in the value created by innovation. New opportunities for business model innovation by participating companies are made possible by the ecosystem model. This ecosystem model builds on: i the lessons learned from the experience of the first author as a senior integrated circuit architect for providers of public-key cryptography solutions and as the owner of a semiconductor startup, and ii the latest scholarly research on technology entrepreneurship, business models, platforms, and business ecosystems. This article will be of interest to all technology entrepreneurs, but it will be of particular interest to owners of small companies that provide security solutions and to specialized security professionals seeking to launch their own companies.

Multi-agent sequential hypothesis testing

KAUST Repository

Kim, Kwang-Ki K.

2014-12-15

This paper considers multi-agent sequential hypothesis testing and presents a framework for strategic learning in sequential games with explicit consideration of both temporal and spatial coordination. The associated Bayes risk functions explicitly incorporate costs of taking private/public measurements, costs of time-difference and disagreement in actions of agents, and costs of false declaration/choices in the sequential hypothesis testing. The corresponding sequential decision processes have well-defined value functions with respect to (a) the belief states for the case of conditional independent private noisy measurements that are also assumed to be independent identically distributed over time, and (b) the information states for the case of correlated private noisy measurements. A sequential investment game of strategic coordination and delay is also discussed as an application of the proposed strategic learning rules.

Demonstration of two-qubit algorithms with a superconducting quantum processor.

Science.gov (United States)

DiCarlo, L; Chow, J M; Gambetta, J M; Bishop, Lev S; Johnson, B R; Schuster, D I; Majer, J; Blais, A; Frunzio, L; Girvin, S M; Schoelkopf, R J

2009-07-09

Quantum computers, which harness the superposition and entanglement of physical states, could outperform their classical counterparts in solving problems with technological impact-such as factoring large numbers and searching databases. A quantum processor executes algorithms by applying a programmable sequence of gates to an initialized register of qubits, which coherently evolves into a final state containing the result of the computation. Building a quantum processor is challenging because of the need to meet simultaneously requirements that are in conflict: state preparation, long coherence times, universal gate operations and qubit readout. Processors based on a few qubits have been demonstrated using nuclear magnetic resonance, cold ion trap and optical systems, but a solid-state realization has remained an outstanding challenge. Here we demonstrate a two-qubit superconducting processor and the implementation of the Grover search and Deutsch-Jozsa quantum algorithms. We use a two-qubit interaction, tunable in strength by two orders of magnitude on nanosecond timescales, which is mediated by a cavity bus in a circuit quantum electrodynamics architecture. This interaction allows the generation of highly entangled states with concurrence up to 94 per cent. Although this processor constitutes an important step in quantum computing with integrated circuits, continuing efforts to increase qubit coherence times, gate performance and register size will be required to fulfil the promise of a scalable technology.

Mining Sequential Update Summarization with Hierarchical Text Analysis

Directory of Open Access Journals (Sweden)

Chunyun Zhang

2016-01-01

Full Text Available The outbreak of unexpected news events such as large human accident or natural disaster brings about a new information access problem where traditional approaches fail. Mostly, news of these events shows characteristics that are early sparse and later redundant. Hence, it is very important to get updates and provide individuals with timely and important information of these incidents during their development, especially when being applied in wireless and mobile Internet of Things (IoT. In this paper, we define the problem of sequential update summarization extraction and present a new hierarchical update mining system which can broadcast with useful, new, and timely sentence-length updates about a developing event. The new system proposes a novel method, which incorporates techniques from topic-level and sentence-level summarization. To evaluate the performance of the proposed system, we apply it to the task of sequential update summarization of temporal summarization (TS track at Text Retrieval Conference (TREC 2013 to compute four measurements of the update mining system: the expected gain, expected latency gain, comprehensiveness, and latency comprehensiveness. Experimental results show that our proposed method has good performance.

Advanced Avionics and Processor Systems for a Flexible Space Exploration Architecture

Science.gov (United States)

Keys, Andrew S.; Adams, James H.; Smith, Leigh M.; Johnson, Michael A.; Cressler, John D.

2010-01-01

The Advanced Avionics and Processor Systems (AAPS) project, formerly known as the Radiation Hardened Electronics for Space Environments (RHESE) project, endeavors to develop advanced avionic and processor technologies anticipated to be used by NASA s currently evolving space exploration architectures. The AAPS project is a part of the Exploration Technology Development Program, which funds an entire suite of technologies that are aimed at enabling NASA s ability to explore beyond low earth orbit. NASA s Marshall Space Flight Center (MSFC) manages the AAPS project. AAPS uses a broad-scoped approach to developing avionic and processor systems. Investment areas include advanced electronic designs and technologies capable of providing environmental hardness, reconfigurable computing techniques, software tools for radiation effects assessment, and radiation environment modeling tools. Near-term emphasis within the multiple AAPS tasks focuses on developing prototype components using semiconductor processes and materials (such as Silicon-Germanium (SiGe)) to enhance a device s tolerance to radiation events and low temperature environments. As the SiGe technology will culminate in a delivered prototype this fiscal year, the project emphasis shifts its focus to developing low-power, high efficiency total processor hardening techniques. In addition to processor development, the project endeavors to demonstrate techniques applicable to reconfigurable computing and partially reconfigurable Field Programmable Gate Arrays (FPGAs). This capability enables avionic architectures the ability to develop FPGA-based, radiation tolerant processor boards that can serve in multiple physical locations throughout the spacecraft and perform multiple functions during the course of the mission. The individual tasks that comprise AAPS are diverse, yet united in the common endeavor to develop electronics capable of operating within the harsh environment of space. Specifically, the AAPS tasks for

OLYMPUS system and development of its pre-processor

International Nuclear Information System (INIS)

Okamoto, Masao; Takeda, Tatsuoki; Tanaka, Masatoshi; Asai, Kiyoshi; Nakano, Koh.

1977-08-01

The OLYMPUS SYSTEM developed by K. V. Roverts et al. was converted and introduced in computer system FACOM 230/75 of the JAERI Computing Center. A pre-processor was also developed for the OLYMPUS SYSTEM. The OLYMPUS SYSTEM is very useful for development, standardization and exchange of programs in thermonuclear fusion research and plasma physics. The pre-processor developed by the present authors is not only essential for the JAERI OLYMPUS SYSTEM, but also useful in manipulation, creation and correction of program files. (auth.)

A fast processor for di-lepton triggers

CERN Document Server

Kostarakis, P; Barsotti, E; Conetti, S; Cox, B; Enagonio, J; Haldeman, M; Haynes, W; Katsanevas, S; Kerns, C; Lebrun, P; Smith, H; Soszyniski, T; Stoffel, J; Treptow, K; Turkot, F; Wagner, R

1981-01-01

As a new application of the Fermilab ECL-CAMAC logic modules a fast trigger processor was developed for Fermilab experiment E-537, aiming to measure the higher mass di-muon production by antiprotons. The processor matches the hit information received from drift chambers and scintillation counters, to find candidate muon tracks and determine their directions and momenta. The tracks are then paired to compute an invariant mass: when the computed mass falls within the desired range, the event is accepted. The process is accomplished in times of 5 to 10 microseconds, while achieving a trigger rate reduction of up to a factor of ten. (5 refs).

Time Manager Software for a Flight Processor

Science.gov (United States)

Zoerne, Roger

2012-01-01

Data analysis is a process of inspecting, cleaning, transforming, and modeling data to highlight useful information and suggest conclusions. Accurate timestamps and a timeline of vehicle events are needed to analyze flight data. By moving the timekeeping to the flight processor, there is no longer a need for a redundant time source. If each flight processor is initially synchronized to GPS, they can freewheel and maintain a fairly accurate time throughout the flight with no additional GPS time messages received. How ever, additional GPS time messages will ensure an even greater accuracy. When a timestamp is required, a gettime function is called that immediately reads the time-base register.

Bulk-memory processor for data acquisition

International Nuclear Information System (INIS)

Nelson, R.O.; McMillan, D.E.; Sunier, J.W.; Meier, M.; Poore, R.V.

1981-01-01

To meet the diverse needs and data rate requirements at the Van de Graaff and Weapons Neutron Research (WNR) facilities, a bulk memory system has been implemented which includes a fast and flexible processor. This bulk memory processor (BMP) utilizes bit slice and microcode techniques and features a 24 bit wide internal architecture allowing direct addressing of up to 16 megawords of memory and histogramming up to 16 million counts per channel without overflow. The BMP is interfaced to the MOSTEK MK 8000 bulk memory system and to the standard MODCOMP computer I/O bus. Coding for the BMP both at the microcode level and with macro instructions is supported. The generalized data acquisition system has been extended to support the BMP in a manner transparent to the user

RISC Processors and High Performance Computing

Science.gov (United States)

Bailey, David H.; Saini, Subhash; Craw, James M. (Technical Monitor)

1995-01-01

This tutorial will discuss the top five RISC microprocessors and the parallel systems in which they are used. It will provide a unique cross-machine comparison not available elsewhere. The effective performance of these processors will be compared by citing standard benchmarks in the context of real applications. The latest NAS Parallel Benchmarks, both absolute performance and performance per dollar, will be listed. The next generation of the NPB will be described. The tutorial will conclude with a discussion of future directions in the field. Technology Transfer Considerations: All of these computer systems are commercially available internationally. Information about these processors is available in the public domain, mostly from the vendors themselves. The NAS Parallel Benchmarks and their results have been previously approved numerous times for public release, beginning back in 1991.

Reduced power processor requirements for the 30-cm diameter HG ion thruster

Science.gov (United States)

Rawlin, V. K.

1979-01-01

The characteristics of power processors strongly impact the overall performance and cost of electric propulsion systems. A program was initiated to evaluate simplifications of the thruster-power processor interface requirements. The power processor requirements are mission dependent with major differences arising for those missions which require a nearly constant thruster operating point (typical of geocentric and some inbound planetary missions) and those requiring operation over a large range of input power (such as outbound planetary missions). This paper describes the results of tests which have indicated that as many as seven of the twelve power supplies may be eliminated from the present Functional Model Power Processor used with 30-cm diameter Hg ion thrusters.

Sensitometric Control of Automatic Processors in a Hospital Center : Retrospective Study

International Nuclear Information System (INIS)

Lobato Busto, R.; Pombar Camean, M.

1992-01-01

This paper analyses the results obtained between February (1990) and July (1991) of the sensitometric control of the seven automatic processors which are in Hospital General de Galicia-Clinico Universitario (Santiago de Compostela). The deviations with regard to the reference values of each processor, permitting the precocious detection of disturbances before being revealed by the image, were analysed. In this analysis, it was achieved that the days in which the automatic processors were out of standing only varied between 2.3% and 5% from the checked days. (author)

Rational calculation accuracy in acousto-optical matrix-vector processor

Science.gov (United States)

Oparin, V. V.; Tigin, Dmitry V.

1994-01-01

The high speed of parallel computations for a comparatively small-size processor and acceptable power consumption makes the usage of acousto-optic matrix-vector multiplier (AOMVM) attractive for processing of large amounts of information in real time. The limited accuracy of computations is an essential disadvantage of such a processor. The reduced accuracy requirements allow for considerable simplification of the AOMVM architecture and the reduction of the demands on its components.

Sequential charged particle reaction

International Nuclear Information System (INIS)

Hori, Jun-ichi; Ochiai, Kentaro; Sato, Satoshi; Yamauchi, Michinori; Nishitani, Takeo

2004-01-01

The effective cross sections for producing the sequential reaction products in F82H, pure vanadium and LiF with respect to the 14.9-MeV neutron were obtained and compared with the estimation ones. Since the sequential reactions depend on the secondary charged particles behavior, the effective cross sections are corresponding to the target nuclei and the material composition. The effective cross sections were also estimated by using the EAF-libraries and compared with the experimental ones. There were large discrepancies between estimated and experimental values. Additionally, we showed the contribution of the sequential reaction on the induced activity and dose rate in the boundary region with water. From the present study, it has been clarified that the sequential reactions are of great importance to evaluate the dose rates around the surface of cooling pipe and the activated corrosion products. (author)

Pure perceptual-based learning of second-, third-, and fourth-order sequential probabilities.

Science.gov (United States)

Remillard, Gilbert

2011-07-01

There is evidence that sequence learning in the traditional serial reaction time task (SRTT), where target location is the response dimension, and sequence learning in the perceptual SRTT, where target location is not the response dimension, are handled by different mechanisms. The ability of the latter mechanism to learn sequential contingencies that can be learned by the former mechanism was examined. Prior research has established that people can learn second-, third-, and fourth-order probabilities in the traditional SRTT. The present study reveals that people can learn such probabilities in the perceptual SRTT. This suggests that the two mechanisms may have similar architectures. A possible neural basis of the two mechanisms is discussed.

Post-silicon and runtime verification for modern processors

CERN Document Server

Wagner, Ilya

2010-01-01

The purpose of this book is to survey the state of the art and evolving directions in post-silicon and runtime verification. The authors start by giving an overview of the state of the art in verification, particularly current post-silicon methodologies in use in the industry, both for the domain of processor pipeline design and for memory subsystems. They then dive into the presentation of several new post-silicon verification solutions aimed at boosting the verification coverage of modern processors, dedicating several chapters to this topic. The presentation of runtime verification solution

Ring-array processor distribution topology for optical interconnects

Science.gov (United States)

Li, Yao; Ha, Berlin; Wang, Ting; Wang, Sunyu; Katz, A.; Lu, X. J.; Kanterakis, E.

1992-01-01

The existing linear and rectangular processor distribution topologies for optical interconnects, although promising in many respects, cannot solve problems such as clock skews, the lack of supporting elements for efficient optical implementation, etc. The use of a ring-array processor distribution topology, however, can overcome these problems. Here, a study of the ring-array topology is conducted with an aim of implementing various fast clock rate, high-performance, compact optical networks for digital electronic multiprocessor computers. Practical design issues are addressed. Some proof-of-principle experimental results are included.

Reconfigurable lattice mesh designs for programmable photonic processors.

Science.gov (United States)

Pérez, Daniel; Gasulla, Ivana; Capmany, José; Soref, Richard A

2016-05-30

We propose and analyse two novel mesh design geometries for the implementation of tunable optical cores in programmable photonic processors. These geometries are the hexagonal and the triangular lattice. They are compared here to a previously proposed square mesh topology in terms of a series of figures of merit that account for metrics that are relevant to on-chip integration of the mesh. We find that that the hexagonal mesh is the most suitable option of the three considered for the implementation of the reconfigurable optical core in the programmable processor.

Interactive high-resolution isosurface ray casting on multicore processors.

Science.gov (United States)

Wang, Qin; JaJa, Joseph

2008-01-01

We present a new method for the interactive rendering of isosurfaces using ray casting on multi-core processors. This method consists of a combination of an object-order traversal that coarsely identifies possible candidate 3D data blocks for each small set of contiguous pixels, and an isosurface ray casting strategy tailored for the resulting limited-size lists of candidate 3D data blocks. While static screen partitioning is widely used in the literature, our scheme performs dynamic allocation of groups of ray casting tasks to ensure almost equal loads among the different threads running on multi-cores while maintaining spatial locality. We also make careful use of memory management environment commonly present in multi-core processors. We test our system on a two-processor Clovertown platform, each consisting of a Quad-Core 1.86-GHz Intel Xeon Processor, for a number of widely different benchmarks. The detailed experimental results show that our system is efficient and scalable, and achieves high cache performance and excellent load balancing, resulting in an overall performance that is superior to any of the previous algorithms. In fact, we achieve an interactive isosurface rendering on a 1024(2) screen for all the datasets tested up to the maximum size of the main memory of our platform.

77 FR 124 - Biological Processors of Alabama; Decatur, Morgan County, AL; Notice of Settlement

Science.gov (United States)

2012-01-03

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9612-9] Biological Processors of Alabama; Decatur, Morgan... reimbursement of past response costs concerning the Biological Processors of Alabama Superfund Site located in... Ms. Paula V. Painter. Submit your comments by Site name Biological Processors of Alabama Superfund...

Eyewitness confidence in simultaneous and sequential lineups: a criterion shift account for sequential mistaken identification overconfidence.

Science.gov (United States)

Dobolyi, David G; Dodson, Chad S

2013-12-01

Confidence judgments for eyewitness identifications play an integral role in determining guilt during legal proceedings. Past research has shown that confidence in positive identifications is strongly associated with accuracy. Using a standard lineup recognition paradigm, we investigated accuracy using signal detection and ROC analyses, along with the tendency to choose a face with both simultaneous and sequential lineups. We replicated past findings of reduced rates of choosing with sequential as compared to simultaneous lineups, but notably found an accuracy advantage in favor of simultaneous lineups. Moreover, our analysis of the confidence-accuracy relationship revealed two key findings. First, we observed a sequential mistaken identification overconfidence effect: despite an overall reduction in false alarms, confidence for false alarms that did occur was higher with sequential lineups than with simultaneous lineups, with no differences in confidence for correct identifications. This sequential mistaken identification overconfidence effect is an expected byproduct of the use of a more conservative identification criterion with sequential than with simultaneous lineups. Second, we found a steady drop in confidence for mistaken identifications (i.e., foil identifications and false alarms) from the first to the last face in sequential lineups, whereas confidence in and accuracy of correct identifications remained relatively stable. Overall, we observed that sequential lineups are both less accurate and produce higher confidence false identifications than do simultaneous lineups. Given the increasing prominence of sequential lineups in our legal system, our data argue for increased scrutiny and possibly a wholesale reevaluation of this lineup format. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Sequential Classification of Palm Gestures Based on A* Algorithm and MLP Neural Network for Quadrocopter Control

Directory of Open Access Journals (Sweden)

Wodziński Marek

2017-06-01

Full Text Available This paper presents an alternative approach to the sequential data classification, based on traditional machine learning algorithms (neural networks, principal component analysis, multivariate Gaussian anomaly detector and finding the shortest path in a directed acyclic graph, using A* algorithm with a regression-based heuristic. Palm gestures were used as an example of the sequential data and a quadrocopter was the controlled object. The study includes creation of a conceptual model and practical construction of a system using the GPU to ensure the realtime operation. The results present the classification accuracy of chosen gestures and comparison of the computation time between the CPU- and GPU-based solutions.

Monte Carlo photon transport on shared memory and distributed memory parallel processors

International Nuclear Information System (INIS)

Martin, W.R.; Wan, T.C.; Abdel-Rahman, T.S.; Mudge, T.N.; Miura, K.

1987-01-01

Parallelized Monte Carlo algorithms for analyzing photon transport in an inertially confined fusion (ICF) plasma are considered. Algorithms were developed for shared memory (vector and scalar) and distributed memory (scalar) parallel processors. The shared memory algorithm was implemented on the IBM 3090/400, and timing results are presented for dedicated runs with two, three, and four processors. Two alternative distributed memory algorithms (replication and dispatching) were implemented on a hypercube parallel processor (1 through 64 nodes). The replication algorithm yields essentially full efficiency for all cube sizes; with the 64-node configuration, the absolute performance is nearly the same as with the CRAY X-MP. The dispatching algorithm also yields efficiencies above 80% in a large simulation for the 64-processor configuration

Very Long Instruction Word Processors

Indian Academy of Sciences (India)

Explicitly Parallel Instruction Computing (EPIC) is an instruction processing paradigm that has been in the spot- light due to its adoption by the next generation of Intel. Processors starting with the IA-64. The EPIC processing paradigm is an evolution of the Very Long Instruction. Word (VLIW) paradigm. This article gives an ...

User manual Dieka PreProcessor

NARCIS (Netherlands)

Valkering, Kasper

2000-01-01

This is the user manual belonging to the Dieka-PreProcessor. This application was written by Wenhua Cao and revised and expanded by Kasper Valkering. The aim of this preproccesor is to be able to draw and mesh extrusion dies in ProEngineer, and do the FE-calculation in Dieka. The preprocessor makes

Impacts of the IBM Cell Processor to Support Climate Models

Science.gov (United States)

Zhou, Shujia; Duffy, Daniel; Clune, Tom; Suarez, Max; Williams, Samuel; Halem, Milt

2008-01-01

NASA is interested in the performance and cost benefits for adapting its applications to the IBM Cell processor. However, its 256KB local memory per SPE and the new communication mechanism, make it very challenging to port an application. We selected the solar radiation component of the NASA GEOS-5 climate model, which: (1) is representative of column physics (approximately 50% computational time), (2) has a high computational load relative to transferring data from and to main memory, (3) performs independent calculations across multiple columns. We converted the baseline code (single-precision, Fortran) to C and ported it with manually SIMDizing 4 independent columns and found that a Cell with 8 SPEs can process 2274 columns per second. Compared with the baseline results, the Cell is approximately 5.2X, approximately 8.2X, approximately 15.1X faster than a core on Intel Woodcrest, Dempsey, and Itanium2, respectively. We believe this dramatic performance improvement makes a hybrid cluster with Cell and traditional nodes competitive.

Evaluation of the Intel Westmere-EX server processor

CERN Document Server

Jarp, S; Leduc, J; Nowak, A; CERN. Geneva. IT Department

2011-01-01

One year after the arrival of the Intel Xeon 7500 systems (“Nehalem-EX”), CERN openlab is presenting a set of benchmark results obtained when running on the new Xeon E7-4870 Processors, representing the “Westmere-EX” family. A modern 4-socket, 40-core system is confronted with the previous generation of expandable (“EX”) platforms, represented by a 4-socket, 32-core Intel Xeon X7560 based system – both being “top of the line” systems. Benchmarking of modern processors is a very complex affair. One has to control (at least) the following features: processor frequency, overclocking via Turbo mode, the number of physical cores in use, the use of logical cores via Symmetric MultiThreading (SMT), the cache sizes available, the configured memory topology, as well as the power configuration if throughput per watt is to be measured. As in previous activities, we have tried to do a good job of comparing like with like. In a “top of the line” comparison based on the HEPSPEC06 benchmark, the “We...

3081/E processor and its on-line use

International Nuclear Information System (INIS)

Rankin, P.; Bricaud, B.; Gravina, M.

1985-05-01

The 3081/E is a second generation emulator of a mainframe IBM. One of it's applications will be to form part of the data acquisition system of the upgraded Mark II detector for data taking at the SLAC linear collider. Since the processor does not have direct connections to I/O devices a FASTBUS interface will be provided to allow communication with both SLAC Scanner Processors (which are responsible for the accumulation of data at a crate level) and the experiment's VAX 8600 mainframe. The 3081/E's will supply a significant amount of on-line computing power to the experiment (a single 3081/E is equivalent to 4 to 5 VAX 11/780's). A major advantage of the 3081/E is that program development can be done on an IBM mainframe (such as the one used for off-line analysis) which gives the programmer access to a full range of debugging tools. The processor's performance can be continually monitored by comparison of the results obtained using it to those given when the same program is run on an IBM computer. 9 refs

a method of gravity and seismic sequential inversion and its GPU implementation

Science.gov (United States)

Liu, G.; Meng, X.

2011-12-01

In this abstract, we introduce a gravity and seismic sequential inversion method to invert for density and velocity together. For the gravity inversion, we use an iterative method based on correlation imaging algorithm; for the seismic inversion, we use the full waveform inversion. The link between the density and velocity is an empirical formula called Gardner equation, for large volumes of data, we use the GPU to accelerate the computation. For the gravity inversion method , we introduce a method based on correlation imaging algorithm,it is also a interative method, first we calculate the correlation imaging of the observed gravity anomaly, it is some value between -1 and +1, then we multiply this value with a little density ,this value become the initial density model. We get a forward reuslt with this initial model and also calculate the correaltion imaging of the misfit of observed data and the forward data, also multiply the correaltion imaging result a little density and add it to the initial model, then do the same procedure above , at last ,we can get a inversion density model. For the seismic inveron method ,we use a mothod base on the linearity of acoustic wave equation written in the frequency domain,with a intial velociy model, we can get a good velocity result. In the sequential inversion of gravity and seismic , we need a link formula to convert between density and velocity ,in our method , we use the Gardner equation. Driven by the insatiable market demand for real time, high-definition 3D images, the programmable NVIDIA Graphic Processing Unit (GPU) as co-processor of CPU has been developed for high performance computing. Compute Unified Device Architecture (CUDA) is a parallel programming model and software environment provided by NVIDIA designed to overcome the challenge of using traditional general purpose GPU while maintaining a low learn curve for programmers familiar with standard programming languages such as C. In our inversion processing

An intercomparison of Canadian external dosimetry processors for radiation protection

International Nuclear Information System (INIS)

1989-10-01

The five Canadian external dosimetry processors have participated in a two-stage intercomparison. The first stage involved dosimeters to known radiation fields under controlled laboratory conditions. The second stage involved exposing dosimeters to radiation fields in power reactor working environments. The results for each stage indicated the dose reported by each processor relative to an independently determined dose and relative to the others. The results of the intercomparisons confirm the original supposition: namely that the average differences in reported dose among five processors are much less than the uncertainty limits recommended by the ICRP. This report provides a description of the experimental methods as well as a discussion of the results for each stage. The report also includes a set of recommendations

A high-speed analog neural processor

NARCIS (Netherlands)

Masa, P.; Masa, Peter; Hoen, Klaas; Hoen, Klaas; Wallinga, Hans

1994-01-01

Targeted at high-energy physics research applications, our special-purpose analog neural processor can classify up to 70 dimensional vectors within 50 nanoseconds. The decision-making process of the implemented feedforward neural network enables this type of computation to tolerate weight

Processor farming in two-level analysis of historical bridge

Science.gov (United States)

Krejčí, T.; Kruis, J.; Koudelka, T.; Šejnoha, M.

2017-11-01

This contribution presents a processor farming method in connection with a multi-scale analysis. In this method, each macro-scopic integration point or each finite element is connected with a certain meso-scopic problem represented by an appropriate representative volume element (RVE). The solution of a meso-scale problem provides then effective parameters needed on the macro-scale. Such an analysis is suitable for parallel computing because the meso-scale problems can be distributed among many processors. The application of the processor farming method to a real world masonry structure is illustrated by an analysis of Charles bridge in Prague. The three-dimensional numerical model simulates the coupled heat and moisture transfer of one half of arch No. 3. and it is a part of a complex hygro-thermo-mechanical analysis which has been developed to determine the influence of climatic loading on the current state of the bridge.

Array processors: an introduction to their architecture, software, and applications in nuclear medicine

International Nuclear Information System (INIS)

King, M.A.; Doherty, P.W.; Rosenberg, R.J.; Cool, S.L.

1983-01-01

Array processors are ''number crunchers'' that dramatically enhance the processing power of nuclear medicine computer systems for applicatons dealing with the repetitive operations involved in digital image processing of large segments of data. The general architecture and the programming of array processors are introduced, along with some applications of array processors to the reconstruction of emission tomographic images, digital image enhancement, and functional image formation

3D Seismic Imaging through Reverse-Time Migration on Homogeneous and Heterogeneous Multi-Core Processors

Directory of Open Access Journals (Sweden)

Mauricio Araya-Polo

2009-01-01

Full Text Available Reverse-Time Migration (RTM is a state-of-the-art technique in seismic acoustic imaging, because of the quality and integrity of the images it provides. Oil and gas companies trust RTM with crucial decisions on multi-million-dollar drilling investments. But RTM requires vastly more computational power than its predecessor techniques, and this has somewhat hindered its practical success. On the other hand, despite multi-core architectures promise to deliver unprecedented computational power, little attention has been devoted to mapping efficiently RTM to multi-cores. In this paper, we present a mapping of the RTM computational kernel to the IBM Cell/B.E. processor that reaches close-to-optimal performance. The kernel proves to be memory-bound and it achieves a 98% utilization of the peak memory bandwidth. Our Cell/B.E. implementation outperforms a traditional processor (PowerPC 970MP in terms of performance (with an 15.0× speedup and energy-efficiency (with a 10.0× increase in the GFlops/W delivered. Also, it is the fastest RTM implementation available to the best of our knowledge. These results increase the practical usability of RTM. Also, the RTM-Cell/B.E. combination proves to be a strong competitor in the seismic arena.

The Danish real-time SAR processor: first results

DEFF Research Database (Denmark)

Dall, Jørgen; Jørgensen, Jørn Hjelm; Netterstrøm, Anders

1993-01-01

A real-time processor (RTP) for the Danish airborne Synthetic Aperture Radar (SAR) has been designed and constructed at the Electromagnetics Institute. The implementation was completed in mid 1992, and since then the RTP has been operated successfully on several test and demonstration flights....... The processor is capable of focusing the entire swath of the raw SAR data into full resolution, and depending on the choice made by the on-board operator, either a high resolution one-look zoom image or a spatially multilooked overview image is displayed. After a brief design review, the paper addresses various...

Wavelength-encoded OCDMA system using opto-VLSI processors.

Science.gov (United States)

Aljada, Muhsen; Alameh, Kamal

2007-07-01

We propose and experimentally demonstrate a 2.5 Gbits/sper user wavelength-encoded optical code-division multiple-access encoder-decoder structure based on opto-VLSI processing. Each encoder and decoder is constructed using a single 1D opto-very-large-scale-integrated (VLSI) processor in conjunction with a fiber Bragg grating (FBG) array of different Bragg wavelengths. The FBG array spectrally and temporally slices the broadband input pulse into several components and the opto-VLSI processor generates codewords using digital phase holograms. System performance is measured in terms of the autocorrelation and cross-correlation functions as well as the eye diagram.

Wavelength-encoded OCDMA system using opto-VLSI processors

Science.gov (United States)

Aljada, Muhsen; Alameh, Kamal

2007-07-01

We propose and experimentally demonstrate a 2.5 Gbits/sper user wavelength-encoded optical code-division multiple-access encoder-decoder structure based on opto-VLSI processing. Each encoder and decoder is constructed using a single 1D opto-very-large-scale-integrated (VLSI) processor in conjunction with a fiber Bragg grating (FBG) array of different Bragg wavelengths. The FBG array spectrally and temporally slices the broadband input pulse into several components and the opto-VLSI processor generates codewords using digital phase holograms. System performance is measured in terms of the autocorrelation and cross-correlation functions as well as the eye diagram.

Efficient Multicriteria Protein Structure Comparison on Modern Processor Architectures

Science.gov (United States)

Manolakos, Elias S.

2015-01-01

Fast increasing computational demand for all-to-all protein structures comparison (PSC) is a result of three confounding factors: rapidly expanding structural proteomics databases, high computational complexity of pairwise protein comparison algorithms, and the trend in the domain towards using multiple criteria for protein structures comparison (MCPSC) and combining results. We have developed a software framework that exploits many-core and multicore CPUs to implement efficient parallel MCPSC in modern processors based on three popular PSC methods, namely, TMalign, CE, and USM. We evaluate and compare the performance and efficiency of the two parallel MCPSC implementations using Intel's experimental many-core Single-Chip Cloud Computer (SCC) as well as Intel's Core i7 multicore processor. We show that the 48-core SCC is more efficient than the latest generation Core i7, achieving a speedup factor of 42 (efficiency of 0.9), making many-core processors an exciting emerging technology for large-scale structural proteomics. We compare and contrast the performance of the two processors on several datasets and also show that MCPSC outperforms its component methods in grouping related domains, achieving a high F-measure of 0.91 on the benchmark CK34 dataset. The software implementation for protein structure comparison using the three methods and combined MCPSC, along with the developed underlying rckskel algorithmic skeletons library, is available via GitHub. PMID:26605332

Efficient Multicriteria Protein Structure Comparison on Modern Processor Architectures.

Science.gov (United States)

Sharma, Anuj; Manolakos, Elias S

2015-01-01

Fast increasing computational demand for all-to-all protein structures comparison (PSC) is a result of three confounding factors: rapidly expanding structural proteomics databases, high computational complexity of pairwise protein comparison algorithms, and the trend in the domain towards using multiple criteria for protein structures comparison (MCPSC) and combining results. We have developed a software framework that exploits many-core and multicore CPUs to implement efficient parallel MCPSC in modern processors based on three popular PSC methods, namely, TMalign, CE, and USM. We evaluate and compare the performance and efficiency of the two parallel MCPSC implementations using Intel's experimental many-core Single-Chip Cloud Computer (SCC) as well as Intel's Core i7 multicore processor. We show that the 48-core SCC is more efficient than the latest generation Core i7, achieving a speedup factor of 42 (efficiency of 0.9), making many-core processors an exciting emerging technology for large-scale structural proteomics. We compare and contrast the performance of the two processors on several datasets and also show that MCPSC outperforms its component methods in grouping related domains, achieving a high F-measure of 0.91 on the benchmark CK34 dataset. The software implementation for protein structure comparison using the three methods and combined MCPSC, along with the developed underlying rckskel algorithmic skeletons library, is available via GitHub.

Plane-Based Sampling for Ray Casting Algorithm in Sequential Medical Images

Science.gov (United States)

Lin, Lili; Chen, Shengyong; Shao, Yan; Gu, Zichun

2013-01-01

This paper proposes a plane-based sampling method to improve the traditional Ray Casting Algorithm (RCA) for the fast reconstruction of a three-dimensional biomedical model from sequential images. In the novel method, the optical properties of all sampling points depend on the intersection points when a ray travels through an equidistant parallel plan cluster of the volume dataset. The results show that the method improves the rendering speed at over three times compared with the conventional algorithm and the image quality is well guaranteed. PMID:23424608

Remarks on sequential designs in risk assessment

International Nuclear Information System (INIS)

Seidenfeld, T.

1982-01-01

The special merits of sequential designs are reviewed in light of particular challenges that attend risk assessment for human population. The kinds of ''statistical inference'' are distinguished and the problem of design which is pursued is the clash between Neyman-Pearson and Bayesian programs of sequential design. The value of sequential designs is discussed and the Neyman-Pearson vs. Bayesian sequential designs are probed in particular. Finally, warnings with sequential designs are considered, especially in relation to utilitarianism

ARM Processor Based Embedded System for Remote Data Acquisition

OpenAIRE

Raj Kumar Tiwari; Santosh Kumar Agrahari

2014-01-01

The embedded systems are widely used for the data acquisition. The data acquired may be used for monitoring various activity of the system or it can be used to control the parts of the system. Accessing various signals with remote location has greater advantage for multisite operation or unmanned systems. The remote data acquisition used in this paper is based on ARM processor. The Cortex M3 processor used in this system has in-built Ethernet controller which facilitate to acquire the remote ...

Application of Advanced Multi-Core Processor Technologies to Oceanographic Research

Science.gov (United States)

2013-09-30

1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Application of Advanced Multi-Core Processor Technologies...STM32 NXP LPC series No Proprietary Microchip PIC32/DSPIC No > 500 mW; < 5 W ARM Cortex TI OMAP TI Sitara Broadcom BCM2835 Varies FPGA...state-of-the-art information processing architectures. OBJECTIVES Next-generation processor architectures (multi-core, multi-threaded) hold the

Hardware processors for pattern recognition tasks in experiments with wire chambers

International Nuclear Information System (INIS)

Verkerk, C.

1975-01-01

Hardware processors for pattern recognition tasks in experiments with multiwire proportional chambers or drift chambers are described. They vary from simple ones used for deciding in real time if particle trajectories are straight to complex ones for recognition of curved tracks. Schematics and block-diagrams of different processors are shown

Thermal Dissipation Efficiency in a Micro-Processor Using Carbon Nanotubes Based Composite

Science.gov (United States)

Thang, Bui Hung; Van Quang, Cao; Nghia, Van Trong; Hong, Phan Ngoc; Van Chuc, Nguyen; Tam, Ngo Thi Thanh; Quang, Le Dinh; Khang, Dao Duc; Khoi, Phan Hong; Minh, Phan Ngoc

2009-09-01

Modern electronic and optoelectronic devices such as μ-processor, light emitting diode, semiconductor laser issued a challenge in the thermal dissipation problem. Finding an effective way for thermal dissipation therefore becomes a very important issue. It is known that carbon nanotubes (CNTs) is one of the most valuable materials with high thermal conductivity (2000 W/m.K compared to thermal conductivity of Ag 419 W/m.K). This suggested an approach in applying the CNTs as an essential component for thermal dissipation media to improve the performance of computer processor and other high power electronic devices. In this work multi walled carbon nanotubes (MWCNTs) based composites were utilized as the thermal dissipation media in a micro processor of a personal computer. The MWCNTs of different concentrations were added into polyaniline, commercial silicon thermal paste and commercial silver thermal paste by mechanical methods. A personal computer with configuration: Intel Pentium IV 3.066 GHz, 512 MB of RAM and Windows XP Service Pack 2 Operating System was employed. The thermal dissipation efficiency of the system was evaluated by directly measure the temperature of the μ-processor during the operation of the computer in different CPU speeds. The measured results showed that the CNTs based composite could reduce the temperature of the u-processor more than 5° C, and the time for increasing the temperature of the μ-processor was three times longer than that when using commercial thermal paste.

Video frame processor

International Nuclear Information System (INIS)

Joshi, V.M.; Agashe, Alok; Bairi, B.R.

1993-01-01

This report provides technical description regarding the Video Frame Processor (VFP) developed at Bhabha Atomic Research Centre. The instrument provides capture of video images available in CCIR format. Two memory planes each with a capacity of 512 x 512 x 8 bit data enable storage of two video image frames. The stored image can be processed on-line and on-line image subtraction can also be carried out for image comparisons. The VFP is a PC Add-on board and is I/O mapped within the host IBM PC/AT compatible computer. (author). 9 refs., 4 figs., 19 photographs

Sequential lineup laps and eyewitness accuracy.

Science.gov (United States)

Steblay, Nancy K; Dietrich, Hannah L; Ryan, Shannon L; Raczynski, Jeanette L; James, Kali A

2011-08-01

Police practice of double-blind sequential lineups prompts a question about the efficacy of repeated viewings (laps) of the sequential lineup. Two laboratory experiments confirmed the presence of a sequential lap effect: an increase in witness lineup picks from first to second lap, when the culprit was a stranger. The second lap produced more errors than correct identifications. In Experiment 2, lineup diagnosticity was significantly higher for sequential lineup procedures that employed a single versus double laps. Witnesses who elected to view a second lap made significantly more errors than witnesses who chose to stop after one lap or those who were required to view two laps. Witnesses with prior exposure to the culprit did not exhibit a sequential lap effect.

Synchronization of faulty processors in coarse-grained TMR protected partially reconfigurable FPGA designs

International Nuclear Information System (INIS)

Kretzschmar, U.; Gomez-Cornejo, J.; Astarloa, A.; Bidarte, U.; Ser, J. Del

2016-01-01

The expansion of FPGA technology in numerous application fields is a fact. Single Event Effects (SEE) are a critical factor for the reliability of FPGA based systems. For this reason, a number of researches have been studying fault tolerance techniques to harden different elements of FPGA designs. Using Partial Reconfiguration (PR) in conjunction with Triple Modular Redundancy (TMR) is an emerging approach in recent publications dealing with the implementation of fault tolerant processors on SRAM-based FPGAs. While these works pay great attention to the repair of erroneous instances by means of reconfiguration, the essential step of synchronizing the repaired processors is insufficiently addressed. In this context, this paper poses four different synchronization approaches for soft core processors, which balance differently the trade-off between synchronization speed and hardware overhead. All approaches are assessed in practice by synchronizing TMR protected PicoBlaze processors implemented on a Virtex-5 FPGA. Nevertheless all methods are of a general nature and can be applied for different processor architectures in a straightforward fashion. - Highlights: • Four different synchronization methods for faulty processors are proposed. • The methods balance between synchronization speed and hardware overhead. • They can be applied to TMR-protected reconfigurable FPGA designs. • The proposed schemes are implemented and tested in real hardware.

Simulation of Particulate Flows Multi-Processor Machines with Distributed Memory

Energy Technology Data Exchange (ETDEWEB)

Uhlmann, M.

2004-07-01

We presented a method for the parallelization of an immersed boundary algorithm for particulate flows using the MPI standard of communication. The treatment of the fluid phase used the domain decomposition technique over a Cartesian processor grid. The solution of the Helmholtz problem is approximately factorized an relies upon apparel tri-diagonal solver the Poisson problem is solved by means of a parallel multi-grid technique similar to MUDPACK. for the solid phase we employ a master-slaves technique where one processor handles all the particles contained in its Eulerian fluid sub-domain and zero or more neighbor processors collaborate in the computation of particle-related quantities whenever a particle position over laps the boundary of a sub-domain. the parallel efficiency for some preliminary computations is presented. (Author) 9 refs.

MORPION: a fast hardware processor for straight line finding in MWPC

International Nuclear Information System (INIS)

Mur, M.

1980-02-01

A fast hardware processor for straight line finding in MWPC has been built in Saclay and successfully operated in the NA3 experiment at CERN. We give the motivations to build this processor, and describe the hardware implementation of the line finding algorithm. Finally its use and performance in NA3 are described

Robustness of the Sequential Lineup Advantage

Science.gov (United States)

Gronlund, Scott D.; Carlson, Curt A.; Dailey, Sarah B.; Goodsell, Charles A.

2009-01-01

A growing movement in the United States and around the world involves promoting the advantages of conducting an eyewitness lineup in a sequential manner. We conducted a large study (N = 2,529) that included 24 comparisons of sequential versus simultaneous lineups. A liberal statistical criterion revealed only 2 significant sequential lineup…

Graphics processor efficiency for realization of rapid tabular computations

International Nuclear Information System (INIS)

Dudnik, V.A.; Kudryavtsev, V.I.; Us, S.A.; Shestakov, M.V.

2016-01-01

Capabilities of graphics processing units (GPU) and central processing units (CPU) have been investigated for realization of fast-calculation algorithms with the use of tabulated functions. The realization of tabulated functions is exemplified by the GPU/CPU architecture-based processors. Comparison is made between the operating efficiencies of GPU and CPU, employed for tabular calculations at different conditions of use. Recommendations are formulated for the use of graphical and central processors to speed up scientific and engineering computations through the use of tabulated functions

FASTBUS Standard Routines implementation for Fermilab embedded processor boards

International Nuclear Information System (INIS)

Pangburn, J.; Patrick, J.; Kent, S.; Oleynik, G.; Pordes, R.; Votava, M.; Heyes, G.; Watson, W.A. III

1992-10-01

In collaboration with CEBAF, Fermilab's Online Support Department and the CDF experiment have produced a new implementation of the IEEE FASTBUS Standard Routines for two embedded processor FASTBUS boards: the Fermilab Smart Crate Controller (FSCC) and the FASTBUS Readout Controller (FRC). Features of this implementation include: portability (to other embedded processor boards), remote source-level debugging, high speed, optional generation of very high-speed code for readout applications, and built-in Sun RPC support for execution of FASTBUS transactions and lists over the network

Statistical analysis of quality control of automatic processor

International Nuclear Information System (INIS)

Niu Yantao; Zhao Lei; Zhang Wei; Yan Shulin

2002-01-01

Objective: To strengthen the scientific management of automatic processor and promote QC, based on analyzing QC management chart for automatic processor by statistical method, evaluating and interpreting the data and trend of the chart. Method: Speed, contrast, minimum density of step wedge of film strip were measured everyday and recorded on the QC chart. Mean (x-bar), standard deviation (s) and range (R) were calculated. The data and the working trend were evaluated and interpreted for management decisions. Results: Using relative frequency distribution curve constructed by measured data, the authors can judge whether it is a symmetric bell-shaped curve or not. If not, it indicates a few extremes overstepping control limits possibly are pulling the curve to the left or right. If it is a normal distribution, standard deviation (s) is observed. When x-bar +- 2s lies in upper and lower control limits of relative performance indexes, it indicates the processor works in stable status in this period. Conclusion: Guided by statistical method, QC work becomes more scientific and quantified. The authors can deepen understanding and application of the trend chart, and improve the quality management to a new step

Broadband set-top box using MAP-CA processor

Science.gov (United States)

Bush, John E.; Lee, Woobin; Basoglu, Chris

2001-12-01

Advances in broadband access are expected to exert a profound impact in our everyday life. It will be the key to the digital convergence of communication, computer and consumer equipment. A common thread that facilitates this convergence comprises digital media and Internet. To address this market, Equator Technologies, Inc., is developing the Dolphin broadband set-top box reference platform using its MAP-CA Broadband Signal ProcessorT chip. The Dolphin reference platform is a universal media platform for display and presentation of digital contents on end-user entertainment systems. The objective of the Dolphin reference platform is to provide a complete set-top box system based on the MAP-CA processor. It includes all the necessary hardware and software components for the emerging broadcast and the broadband digital media market based on IP protocols. Such reference design requires a broadband Internet access and high-performance digital signal processing. By using the MAP-CA processor, the Dolphin reference platform is completely programmable, allowing various codecs to be implemented in software, such as MPEG-2, MPEG-4, H.263 and proprietary codecs. The software implementation also enables field upgrades to keep pace with evolving technology and industry demands.

High-Performance Linear Algebra Processor using FPGA

National Research Council Canada - National Science Library

Johnson, J

2004-01-01

With recent advances in FPGA (Field Programmable Gate Array) technology it is now feasible to use these devices to build special purpose processors for floating point intensive applications that arise in scientific computing...

Sequential pattern data mining and visualization

Science.gov (United States)

Wong, Pak Chung [Richland, WA; Jurrus, Elizabeth R [Kennewick, WA; Cowley, Wendy E [Benton City, WA; Foote, Harlan P [Richland, WA; Thomas, James J [Richland, WA

2009-05-26

One or more processors (22) are operated to extract a number of different event identifiers therefrom. These processors (22) are further operable to determine a number a display locations each representative of one of the different identifiers and a corresponding time. The display locations are grouped into sets each corresponding to a different one of several event sequences (330a, 330b, 330c. 330d, 330e). An output is generated corresponding to a visualization (320) of the event sequences (330a, 330b, 330c, 330d, 330e).

Use of a track and vertex processor in a fixed-target charm experiment

International Nuclear Information System (INIS)

Schub, M.H.; Carey, T.A.; Hsiung, Y.B.; Kaplan, D.M.; Lee, C.; Miller, G.; Sa, J.; Teng, P.K.

1996-01-01

We have constructed and operated a high-speed parallel-pipelined track and vertex processor and used it to trigger data acquisition in a high-rate charm and beauty experiment at Fermilab. The processor uses information from hodoscopes and wire chambers to reconstruct tracks in the bend view of a magnetic spectrometer, and uses these tracks to find the corresponding tracks in a set of silicon-strip detectors. The processor then forms vertices and triggers the experiment if at least one vertex is downstream of the target. Under typical charm running conditions, with an interaction rate of ∼5 MHz, the processor rejects 80-90% of lower-level triggers while maintaining efficiency of ∼70% for two-prong D-meson decays. (orig.)

Simplifying cochlear implant speech processor fitting

NARCIS (Netherlands)

Willeboer, C.

2008-01-01

Conventional fittings of the speech processor of a cochlear implant (CI) rely to a large extent on the implant recipient's subjective responses. For each of the 22 intracochlear electrodes the recipient has to indicate the threshold level (T-level) and comfortable loudness level (C-level) while

A prediction method for job runtimes on shared processors: Survey, statistical analysis and new avenues

NARCIS (Netherlands)

Dobber, A.M.; van der Mei, R.D.; Koole, G.M.

2007-01-01

Grid computing is an emerging technology by which huge numbers of processors over the world create a global source of processing power. Their collaboration makes it possible to perform computations that are too extensive to perform on a single processor. On a grid, processors may connect and

Multi-agent sequential hypothesis testing

KAUST Repository

Kim, Kwang-Ki K.; Shamma, Jeff S.

2014-01-01

incorporate costs of taking private/public measurements, costs of time-difference and disagreement in actions of agents, and costs of false declaration/choices in the sequential hypothesis testing. The corresponding sequential decision processes have well

Design of Processors with Reconfigurable Microarchitecture

Directory of Open Access Journals (Sweden)

Andrey Mokhov

2014-01-01

Full Text Available Energy becomes a dominating factor for a wide spectrum of computations: from intensive data processing in “big data” companies resulting in large electricity bills, to infrastructure monitoring with wireless sensors relying on energy harvesting. In this context it is essential for a computation system to be adaptable to the power supply and the service demand, which often vary dramatically during runtime. In this paper we present an approach to building processors with reconfigurable microarchitecture capable of changing the way they fetch and execute instructions depending on energy availability and application requirements. We show how to use Conditional Partial Order Graphs to formally specify the microarchitecture of such a processor, explore the design possibilities for its instruction set, and synthesise the instruction decoder using correct-by-construction techniques. The paper is focused on the design methodology, which is evaluated by implementing a power-proportional version of Intel 8051 microprocessor.

Coordinated Energy Management in Heterogeneous Processors

Directory of Open Access Journals (Sweden)

Indrani Paul

2014-01-01

Full Text Available This paper examines energy management in a heterogeneous processor consisting of an integrated CPU–GPU for high-performance computing (HPC applications. Energy management for HPC applications is challenged by their uncompromising performance requirements and complicated by the need for coordinating energy management across distinct core types – a new and less understood problem. We examine the intra-node CPU–GPU frequency sensitivity of HPC applications on tightly coupled CPU–GPU architectures as the first step in understanding power and performance optimization for a heterogeneous multi-node HPC system. The insights from this analysis form the basis of a coordinated energy management scheme, called DynaCo, for integrated CPU–GPU architectures. We implement DynaCo on a modern heterogeneous processor and compare its performance to a state-of-the-art power- and performance-management algorithm. DynaCo improves measured average energy-delay squared (ED2 product by up to 30% with less than 2% average performance loss across several exascale and other HPC workloads.

Sequential stochastic optimization

CERN Document Server

Cairoli, Renzo

1996-01-01

Sequential Stochastic Optimization provides mathematicians and applied researchers with a well-developed framework in which stochastic optimization problems can be formulated and solved. Offering much material that is either new or has never before appeared in book form, it lucidly presents a unified theory of optimal stopping and optimal sequential control of stochastic processes. This book has been carefully organized so that little prior knowledge of the subject is assumed; its only prerequisites are a standard graduate course in probability theory and some familiarity with discrete-paramet

Parallelising a molecular dynamics algorithm on a multi-processor workstation

Science.gov (United States)

Müller-Plathe, Florian

1990-12-01

The Verlet neighbour-list algorithm is parallelised for a multi-processor Hewlett-Packard/Apollo DN10000 workstation. The implementation makes use of memory shared between the processors. It is a genuine master-slave approach by which most of the computational tasks are kept in the master process and the slaves are only called to do part of the nonbonded forces calculation. The implementation features elements of both fine-grain and coarse-grain parallelism. Apart from three calls to library routines, two of which are standard UNIX calls, and two machine-specific language extensions, the whole code is written in standard Fortran 77. Hence, it may be expected that this parallelisation concept can be transfered in parts or as a whole to other multi-processor shared-memory computers. The parallel code is routinely used in production work.

Real time processor for array speckle interferometry

International Nuclear Information System (INIS)

Chin, G.; Florez, J.; Borelli, R.; Fong, W.; Miko, J.; Trujillo, C.

1989-01-01

With the construction of several new large aperture telescopes and the development of large format array detectors in the near IR, the ability to obtain diffraction limited seeing via IR array speckle interferometry offers a powerful tool. We are constructing a real-time processor to acquire image frames, perform array flat-fielding, execute a 64 x 64 element 2D complex FFT, and to average the power spectrum all within the 25 msec coherence time for speckles at near IR wavelength. The processor is a compact unit controlled by a PC with real time display and data storage capability. It provides the ability to optimize observations and obtain results on the telescope rather than waiting several weeks before the data can be analyzed and viewed with off-line methods

UNIBUS processor interface for a FASTBUS data acquisition system

International Nuclear Information System (INIS)

Larwill, M.; Lagerlund, T.D.; Barsotti, E.; Taff, L.M.; Franzen, J.

1981-01-01

Current work on a FASTBUS data acquisition system at Fermilab is described. The system will consist of three pieces of FASTBUS hardware: a UNIBUS processor interface (UPI), a dual-ported bulk memory, and a FASTBUS ''event builder'' (i.e., data acquisition processor). Primary efforts have been on specifying and constructing a UPI. The present specification includes capability for all basic FASTBUS operations, including list processing of consecutive FASTBUS operations. Some possible FASTBUS data acquisition system architectures employing the UPI are discussed along with some detailed specifications of the UPI itself

The UA1 trigger processor

International Nuclear Information System (INIS)

Grayer, G.H.

1981-01-01

Experiment UA1 is a large multi-purpose spectrometer at the CERN proton-antiproton collider, scheduled for late 1981. The principal trigger is formed on the basis of the energy deposition in calorimeters. A trigger decision taken in under 2.4 microseconds can avoid dead time losses due to the bunched nature of the beam. To achieve this we have built fast 8-bit charge to digital converters followed by two identical digital processors tailored to the experiment. The outputs of groups of the 2440 photomultipliers in the calorimeters are summed to form a total of 288 input channels to the ADCs. A look-up table in RAM is used to convert the digitised photomultiplier signals to energy in one processor, combinations of input channels, and also counts the number of clusters with electromagnetic or hadronic energy above pre-determined levels. Up to twelve combinations of these conditions, together with external information, may be combined in coincidence or in veto to form the final trigger. Provision has been made for testing using simulated data in an off-line mode, and sampling real data when on-line. (orig.)

Alternative Water Processor Test Development

Science.gov (United States)

Pickering, Karen D.; Mitchell, Julie; Vega, Leticia; Adam, Niklas; Flynn, Michael; Wjee (er. Rau); Lunn, Griffin; Jackson, Andrew

2012-01-01

The Next Generation Life Support Project is developing an Alternative Water Processor (AWP) as a candidate water recovery system for long duration exploration missions. The AWP consists of biological water processor (BWP) integrated with a forward osmosis secondary treatment system (FOST). The basis of the BWP is a membrane aerated biological reactor (MABR), developed in concert with Texas Tech University. Bacteria located within the MABR metabolize organic material in wastewater, converting approximately 90% of the total organic carbon to carbon dioxide. In addition, bacteria convert a portion of the ammonia-nitrogen present in the wastewater to nitrogen gas, through a combination of nitrogen and denitrification. The effluent from the BWP system is low in organic contaminants, but high in total dissolved solids. The FOST system, integrated downstream of the BWP, removes dissolved solids through a combination of concentration-driven forward osmosis and pressure driven reverse osmosis. The integrated system is expected to produce water with a total organic carbon less than 50 mg/l and dissolved solids that meet potable water requirements for spaceflight. This paper describes the test definition, the design of the BWP and FOST subsystems, and plans for integrated testing.

Suboptimal processor for anomaly detection for system surveillance and diagnosis

Energy Technology Data Exchange (ETDEWEB)

Ciftcioglu, Oe.; Hoogenboom, J.E.; Dam, H. van

1989-06-01

Anomaly detection for nuclear reactor surveillance and diagnosis is described. The residual noise obtained as a result of autoregressive (AR) modelling is essential to obtain high sensitivity for anomaly detection. By means of the method of hypothesis testing a suboptimal anomaly detection processor is devised for system surveillance and diagnosis. Experiments are carried out to investigate the performance of the processor, which is in particular of interest for on-line and real-time applications.

A Trade Study of Two Membrane-Aerated Biological Water Processors

Science.gov (United States)

Allada, Ram; Lange, Kevin; Vega. Leticia; Roberts, Michael S.; Jackson, Andrew; Anderson, Molly; Pickering, Karen

2011-01-01

Biologically based systems are under evaluation as primary water processors for next generation life support systems due to their low power requirements and their inherent regenerative nature. This paper will summarize the results of two recent studies involving membrane aerated biological water processors and present results of a trade study comparing the two systems with regards to waste stream composition, nutrient loading and system design. Results of optimal configurations will be presented.

High performance in silico virtual drug screening on many-core processors

Science.gov (United States)

Price, James; Sessions, Richard B; Ibarra, Amaurys A

2015-01-01

Drug screening is an important part of the drug development pipeline for the pharmaceutical industry. Traditional, lab-based methods are increasingly being augmented with computational methods, ranging from simple molecular similarity searches through more complex pharmacophore matching to more computationally intensive approaches, such as molecular docking. The latter simulates the binding of drug molecules to their targets, typically protein molecules. In this work, we describe BUDE, the Bristol University Docking Engine, which has been ported to the OpenCL industry standard parallel programming language in order to exploit the performance of modern many-core processors. Our highly optimized OpenCL implementation of BUDE sustains 1.43 TFLOP/s on a single Nvidia GTX 680 GPU, or 46% of peak performance. BUDE also exploits OpenCL to deliver effective performance portability across a broad spectrum of different computer architectures from different vendors, including GPUs from Nvidia and AMD, Intel’s Xeon Phi and multi-core CPUs with SIMD instruction sets. PMID:25972727

High performance in silico virtual drug screening on many-core processors.

Science.gov (United States)

McIntosh-Smith, Simon; Price, James; Sessions, Richard B; Ibarra, Amaurys A

2015-05-01

Drug screening is an important part of the drug development pipeline for the pharmaceutical industry. Traditional, lab-based methods are increasingly being augmented with computational methods, ranging from simple molecular similarity searches through more complex pharmacophore matching to more computationally intensive approaches, such as molecular docking. The latter simulates the binding of drug molecules to their targets, typically protein molecules. In this work, we describe BUDE, the Bristol University Docking Engine, which has been ported to the OpenCL industry standard parallel programming language in order to exploit the performance of modern many-core processors. Our highly optimized OpenCL implementation of BUDE sustains 1.43 TFLOP/s on a single Nvidia GTX 680 GPU, or 46% of peak performance. BUDE also exploits OpenCL to deliver effective performance portability across a broad spectrum of different computer architectures from different vendors, including GPUs from Nvidia and AMD, Intel's Xeon Phi and multi-core CPUs with SIMD instruction sets.

Exploring the sequential lineup advantage using WITNESS.

Science.gov (United States)

Goodsell, Charles A; Gronlund, Scott D; Carlson, Curt A

2010-12-01

Advocates claim that the sequential lineup is an improvement over simultaneous lineup procedures, but no formal (quantitatively specified) explanation exists for why it is better. The computational model WITNESS (Clark, Appl Cogn Psychol 17:629-654, 2003) was used to develop theoretical explanations for the sequential lineup advantage. In its current form, WITNESS produced a sequential advantage only by pairing conservative sequential choosing with liberal simultaneous choosing. However, this combination failed to approximate four extant experiments that exhibited large sequential advantages. Two of these experiments became the focus of our efforts because the data were uncontaminated by likely suspect position effects. Decision-based and memory-based modifications to WITNESS approximated the data and produced a sequential advantage. The next step is to evaluate the proposed explanations and modify public policy recommendations accordingly.

Sequential and simultaneous choices: testing the diet selection and sequential choice models.

Science.gov (United States)

Freidin, Esteban; Aw, Justine; Kacelnik, Alex

2009-03-01

We investigate simultaneous and sequential choices in starlings, using Charnov's Diet Choice Model (DCM) and Shapiro, Siller and Kacelnik's Sequential Choice Model (SCM) to integrate function and mechanism. During a training phase, starlings encountered one food-related option per trial (A, B or R) in random sequence and with equal probability. A and B delivered food rewards after programmed delays (shorter for A), while R ('rejection') moved directly to the next trial without reward. In this phase we measured latencies to respond. In a later, choice, phase, birds encountered the pairs A-B, A-R and B-R, the first implementing a simultaneous choice and the second and third sequential choices. The DCM predicts when R should be chosen to maximize intake rate, and SCM uses latencies of the training phase to predict choices between any pair of options in the choice phase. The predictions of both models coincided, and both successfully predicted the birds' preferences. The DCM does not deal with partial preferences, while the SCM does, and experimental results were strongly correlated to this model's predictions. We believe that the SCM may expose a very general mechanism of animal choice, and that its wider domain of success reflects the greater ecological significance of sequential over simultaneous choices.

Space and frequency-multiplexed optical linear algebra processor - Fabrication and initial tests

Science.gov (United States)

Casasent, D.; Jackson, J.

1986-01-01

A new optical linear algebra processor architecture is described. Space and frequency-multiplexing are used to accommodate bipolar and complex-valued data. A fabricated laboratory version of this processor is described, the electronic support system used is discussed, and initial test data obtained on it are presented.

Sequential memory: Binding dynamics

Science.gov (United States)

Afraimovich, Valentin; Gong, Xue; Rabinovich, Mikhail

2015-10-01

Temporal order memories are critical for everyday animal and human functioning. Experiments and our own experience show that the binding or association of various features of an event together and the maintaining of multimodality events in sequential order are the key components of any sequential memories—episodic, semantic, working, etc. We study a robustness of binding sequential dynamics based on our previously introduced model in the form of generalized Lotka-Volterra equations. In the phase space of the model, there exists a multi-dimensional binding heteroclinic network consisting of saddle equilibrium points and heteroclinic trajectories joining them. We prove here the robustness of the binding sequential dynamics, i.e., the feasibility phenomenon for coupled heteroclinic networks: for each collection of successive heteroclinic trajectories inside the unified networks, there is an open set of initial points such that the trajectory going through each of them follows the prescribed collection staying in a small neighborhood of it. We show also that the symbolic complexity function of the system restricted to this neighborhood is a polynomial of degree L - 1, where L is the number of modalities.

The Square Kilometre Array Science Data Processor. Preliminary compute platform design

International Nuclear Information System (INIS)

Broekema, P.C.; Nieuwpoort, R.V. van; Bal, H.E.

2015-01-01

The Square Kilometre Array is a next-generation radio-telescope, to be built in South Africa and Western Australia. It is currently in its detailed design phase, with procurement and construction scheduled to start in 2017. The SKA Science Data Processor is the high-performance computing element of the instrument, responsible for producing science-ready data. This is a major IT project, with the Science Data Processor expected to challenge the computing state-of-the art even in 2020. In this paper we introduce the preliminary Science Data Processor design and the principles that guide the design process, as well as the constraints to the design. We introduce a highly scalable and flexible system architecture capable of handling the SDP workload

An enhanced Ada run-time system for real-time embedded processors

Science.gov (United States)

Sims, J. T.

1991-01-01

An enhanced Ada run-time system has been developed to support real-time embedded processor applications. The primary focus of this development effort has been on the tasking system and the memory management facilities of the run-time system. The tasking system has been extended to support efficient and precise periodic task execution as required for control applications. Event-driven task execution providing a means of task-asynchronous control and communication among Ada tasks is supported in this system. Inter-task control is even provided among tasks distributed on separate physical processors. The memory management system has been enhanced to provide object allocation and protected access support for memory shared between disjoint processors, each of which is executing a distinct Ada program.

High speed vision processor with reconfigurable processing element array based on full-custom distributed memory

Science.gov (United States)

Chen, Zhe; Yang, Jie; Shi, Cong; Qin, Qi; Liu, Liyuan; Wu, Nanjian

2016-04-01

In this paper, a hybrid vision processor based on a compact full-custom distributed memory for near-sensor high-speed image processing is proposed. The proposed processor consists of a reconfigurable processing element (PE) array, a row processor (RP) array, and a dual-core microprocessor. The PE array includes two-dimensional processing elements with a compact full-custom distributed memory. It supports real-time reconfiguration between the PE array and the self-organized map (SOM) neural network. The vision processor is fabricated using a 0.18 µm CMOS technology. The circuit area of the distributed memory is reduced markedly into 1/3 of that of the conventional memory so that the circuit area of the vision processor is reduced by 44.2%. Experimental results demonstrate that the proposed design achieves correct functions.

SPP: A data base processor data communications protocol

Science.gov (United States)

Fishwick, P. A.

1983-01-01

The design and implementation of a data communications protocol for the Intel Data Base Processor (DBP) is defined. The protocol is termed SPP (Service Port Protocol) since it enables data transfer between the host computer and the DBP service port. The protocol implementation is extensible in that it is explicitly layered and the protocol functionality is hierarchically organized. Extensive trace and performance capabilities have been supplied with the protocol software to permit optional efficient monitoring of the data transfer between the host and the Intel data base processor. Machine independence was considered to be an important attribute during the design and implementation of SPP. The protocol source is fully commented and is included in Appendix A of this report.

Techniques for optimizing inerting in electron processors

International Nuclear Information System (INIS)

Rangwalla, I.J.; Korn, D.J.; Nablo, S.V.

1993-01-01

The design of an ''inert gas'' distribution system in an electron processor must satisfy a number of requirements. The first of these is the elimination or control of beam produced ozone and NO x which can be transported from the process zone by the product into the work area. Since the tolerable levels for O 3 in occupied areas around the processor are 3 in the beam heated process zone, or exhausting and dilution of the gas at the processor exit. The second requirement of the inerting system is to provide a suitable environment for completing efficient, free radical initiated addition polymerization. The competition between radical loss through de-excitation and that from O 2 quenching must be understood. This group has used gas chromatographic analysis of electron cured coatings to study the trade-offs of delivered dose, dose rate and O 2 concentrations in the process zone to determine the tolerable ranges of parameter excursions for production quality control purposes. These techniques are described for an ink coating system on paperboard, where a broad range of process parameters have been studied (D, D radical, O 2 ). It is then shown how the technique is used to optimize the use of higher purity (10-100 ppm O 2 ) nitrogen gas for inerting, in combination with lower purity (2-20,000 ppm O 2 ) non-cryogenically produced gas, as from a membrane or pressure swing adsorption generators. (author)

A discussion of tools and techniques for distributed processor based control systems using CAMAC

International Nuclear Information System (INIS)

Tippie, J.W.; Scandora, A.E.

1985-01-01

This paper describes and analyzes various distributed processor architectures using commercially available CAMAC components. The general orientation is toward distributed control systems using Digital Equipment Corporation LSI11 processors in a CAMAC environment. The paper describes in detail software tools available to simplify the development of applications software and to provide a high-level runtime environment both at the host and the remote processors. Discussion focuses on techniques for downloading of operating systems from a large host and applications tasks written in high-level languages. It also discusses software tools which enable tasks in the remote processors to exchange messages and data with tasks in the host in a simple and elegant way

Expert System Constant False Alarm Rate (CFAR) Processor

National Research Council Canada - National Science Library

Wicks, Michael C

2006-01-01

An artificial intelligence system improves radar signal processor performance by increasing target probability of detection and reducing probability of false alarm in a severe radar clutter environment...

Sequential Probability Ration Tests : Conservative and Robust

NARCIS (Netherlands)

Kleijnen, J.P.C.; Shi, Wen

2017-01-01

In practice, most computers generate simulation outputs sequentially, so it is attractive to analyze these outputs through sequential statistical methods such as sequential probability ratio tests (SPRTs). We investigate several SPRTs for choosing between two hypothesized values for the mean output

EXPERIENCE WITH FPGA-BASED PROCESSOR CORE AS FRONT-END COMPUTER

International Nuclear Information System (INIS)

HOFF, L.T.

2005-01-01

The RHIC control system architecture follows the familiar ''standard model''. LINUX workstations are used as operator consoles. Front-end computers are distributed around the accelerator, close to equipment being controlled or monitored. These computers are generally based on VMEbus CPU modules running the VxWorks operating system. I/O is typically performed via the VMEbus, or via PMC daughter cards (via an internal PCI bus), or via on-board I/O interfaces (Ethernet or serial). Advances in FPGA size and sophistication now permit running virtual processor ''cores'' within the FPGA logic, including ''cores'' with advanced features such as memory management. Such systems offer certain advantages over traditional VMEbus Front-end computers. Advantages include tighter coupling with FPGA logic, and therefore higher I/O bandwidth, and flexibility in packaging, possibly resulting in a lower noise environment and/or lower cost. This paper presents the experience acquired while porting the RHIC control system to a PowerPC 405 core within a Xilinx FPGA for use in low-level RF control

Choosing processor array configuration by performance modeling for a highly parallel linear algebra algorithm

International Nuclear Information System (INIS)

Littlefield, R.J.; Maschhoff, K.J.

1991-04-01

Many linear algebra algorithms utilize an array of processors across which matrices are distributed. Given a particular matrix size and a maximum number of processors, what configuration of processors, i.e., what size and shape array, will execute the fastest? The answer to this question depends on tradeoffs between load balancing, communication startup and transfer costs, and computational overhead. In this paper we analyze in detail one algorithm: the blocked factored Jacobi method for solving dense eigensystems. A performance model is developed to predict execution time as a function of the processor array and matrix sizes, plus the basic computation and communication speeds of the underlying computer system. In experiments on a large hypercube (up to 512 processors), this model has been found to be highly accurate (mean error ∼ 2%) over a wide range of matrix sizes (10 x 10 through 200 x 200) and processor counts (1 to 512). The model reveals, and direct experiment confirms, that the tradeoffs mentioned above can be surprisingly complex and counterintuitive. We propose decision procedures based directly on the performance model to choose configurations for fastest execution. The model-based decision procedures are compared to a heuristic strategy and shown to be significantly better. 7 refs., 8 figs., 1 tab

NeuroFlow: A General Purpose Spiking Neural Network Simulation Platform using Customizable Processors.

Science.gov (United States)

Cheung, Kit; Schultz, Simon R; Luk, Wayne

2015-01-01

NeuroFlow is a scalable spiking neural network simulation platform for off-the-shelf high performance computing systems using customizable hardware processors such as Field-Programmable Gate Arrays (FPGAs). Unlike multi-core processors and application-specific integrated circuits, the processor architecture of NeuroFlow can be redesigned and reconfigured to suit a particular simulation to deliver optimized performance, such as the degree of parallelism to employ. The compilation process supports using PyNN, a simulator-independent neural network description language, to configure the processor. NeuroFlow supports a number of commonly used current or conductance based neuronal models such as integrate-and-fire and Izhikevich models, and the spike-timing-dependent plasticity (STDP) rule for learning. A 6-FPGA system can simulate a network of up to ~600,000 neurons and can achieve a real-time performance of 400,000 neurons. Using one FPGA, NeuroFlow delivers a speedup of up to 33.6 times the speed of an 8-core processor, or 2.83 times the speed of GPU-based platforms. With high flexibility and throughput, NeuroFlow provides a viable environment for large-scale neural network simulation.

Beeldverwerking met de Micron Automatic Processor

OpenAIRE

Goyens, Frank

2017-01-01

Deze thesis is een onderzoek naar toepassingen binnen beeldverwerking op de Micron Automata Processor hardware. De hardware wordt vergeleken met populaire hedendaagse hardware. Ook bevat dit onderzoek nuttige informatie en strategieën voor het ontwikkelen van nieuwe toepassingen. Bevindingen in dit onderzoek omvatten proof of concept algoritmes en een praktische toepassing.

Compact gasoline fuel processor for passenger vehicle APU

Science.gov (United States)

Severin, Christopher; Pischinger, Stefan; Ogrzewalla, Jürgen

Due to the increasing demand for electrical power in today's passenger vehicles, and with the requirements regarding fuel consumption and environmental sustainability tightening, a fuel cell-based auxiliary power unit (APU) becomes a promising alternative to the conventional generation of electrical energy via internal combustion engine, generator and battery. It is obvious that the on-board stored fuel has to be used for the fuel cell system, thus, gasoline or diesel has to be reformed on board. This makes the auxiliary power unit a complex integrated system of stack, air supply, fuel processor, electrics as well as heat and water management. Aside from proving the technical feasibility of such a system, the development has to address three major barriers:start-up time, costs, and size/weight of the systems. In this paper a packaging concept for an auxiliary power unit is presented. The main emphasis is placed on the fuel processor, as good packaging of this large subsystem has the strongest impact on overall size. The fuel processor system consists of an autothermal reformer in combination with water-gas shift and selective oxidation stages, based on adiabatic reactors with inter-cooling. The configuration was realized in a laboratory set-up and experimentally investigated. The results gained from this confirm a general suitability for mobile applications. A start-up time of 30 min was measured, while a potential reduction to 10 min seems feasible. An overall fuel processor efficiency of about 77% was measured. On the basis of the know-how gained by the experimental investigation of the laboratory set-up a packaging concept was developed. Using state-of-the-art catalyst and heat exchanger technology, the volumes of these components are fixed. However, the overall volume is higher mainly due to mixing zones and flow ducts, which do not contribute to the chemical or thermal function of the system. Thus, the concept developed mainly focuses on minimization of those

Architecture-Aware Optimization of an HEVC decoder on Asymmetric Multicore Processors

OpenAIRE

Rodríguez-Sánchez, Rafael; Quintana-Ortí, Enrique S.

2016-01-01

Low-power asymmetric multicore processors (AMPs) attract considerable attention due to their appealing performance-power ratio for energy-constrained environments. However, these processors pose a significant programming challenge due to the integration of cores with different performance capabilities, asking for an asymmetry-aware scheduling solution that carefully distributes the workload. The recent HEVC standard, which offers several high-level parallelization strategies, is an important ...

Using of opportunities of graphic processors for acceleration of scientific and technical calculations

International Nuclear Information System (INIS)

Dudnik, V.A.; Kudryavtsev, V.I.; Sereda, T.M.; Us, S.A.; Shestakov, M.V.

2009-01-01

The new opportunities of modern graphic processors (GPU) for acceleration of the scientific and technical calculations with the help of paralleling of a calculating task between the central processor and GPU are described. The description of using the technology NVIDIA CUDA for connection of parallel computing opportunities of GPU within the programme of the some intensive mathematical tasks is resulted. The examples of comparison of parameters of productivity in the process of these tasks' calculation without application of GPU and with use of opportunities NVIDIA CUDA for graphic processor GeForce 8800 are resulted

Sequential Product of Quantum Effects: An Overview

Science.gov (United States)

Gudder, Stan

2010-12-01

This article presents an overview for the theory of sequential products of quantum effects. We first summarize some of the highlights of this relatively recent field of investigation and then provide some new results. We begin by discussing sequential effect algebras which are effect algebras endowed with a sequential product satisfying certain basic conditions. We then consider sequential products of (discrete) quantum measurements. We next treat transition effect matrices (TEMs) and their associated sequential product. A TEM is a matrix whose entries are effects and whose rows form quantum measurements. We show that TEMs can be employed for the study of quantum Markov chains. Finally, we prove some new results concerning TEMs and vector densities.

Optimal Sequential Rules for Computer-Based Instruction.

Science.gov (United States)

Vos, Hans J.

1998-01-01

Formulates sequential rules for adapting the appropriate amount of instruction to learning needs in the context of computer-based instruction. Topics include Bayesian decision theory, threshold and linear-utility structure, psychometric model, optimal sequential number of test questions, and an empirical example of sequential instructional…

Run-time Adaptable VLIW Processors : Resources, Performance, Power Consumption, and Reliability Trade-offs

NARCIS (Netherlands)

Anjam, F.

2013-01-01

In this dissertation, we propose to combine programmability with reconfigurability by implementing an adaptable programmable VLIW processor in a reconfigurable hardware. The approach allows applications to be developed at high-level (C language level), while at the same time, the processor

Trigger and decision processors

International Nuclear Information System (INIS)

Franke, G.

1980-11-01

In recent years there have been many attempts in high energy physics to make trigger and decision processes faster and more sophisticated. This became necessary due to a permanent increase of the number of sensitive detector elements in wire chambers and calorimeters, and in fact it was possible because of the fast developments in integrated circuits technique. In this paper the present situation will be reviewed. The discussion will be mainly focussed upon event filtering by pure software methods and - rather hardware related - microprogrammable processors as well as random access memory triggers. (orig.)

Optical Finite Element Processor

Science.gov (United States)

Casasent, David; Taylor, Bradley K.

1986-01-01

A new high-accuracy optical linear algebra processor (OLAP) with many advantageous features is described. It achieves floating point accuracy, handles bipolar data by sign-magnitude representation, performs LU decomposition using only one channel, easily partitions and considers data flow. A new application (finite element (FE) structural analysis) for OLAPs is introduced and the results of a case study presented. Error sources in encoded OLAPs are addressed for the first time. Their modeling and simulation are discussed and quantitative data are presented. Dominant error sources and the effects of composite error sources are analyzed.

A continuous-time neural model for sequential action.

Science.gov (United States)

Kachergis, George; Wyatte, Dean; O'Reilly, Randall C; de Kleijn, Roy; Hommel, Bernhard

2014-11-05

Action selection, planning and execution are continuous processes that evolve over time, responding to perceptual feedback as well as evolving top-down constraints. Existing models of routine sequential action (e.g. coffee- or pancake-making) generally fall into one of two classes: hierarchical models that include hand-built task representations, or heterarchical models that must learn to represent hierarchy via temporal context, but thus far lack goal-orientedness. We present a biologically motivated model of the latter class that, because it is situated in the Leabra neural architecture, affords an opportunity to include both unsupervised and goal-directed learning mechanisms. Moreover, we embed this neurocomputational model in the theoretical framework of the theory of event coding (TEC), which posits that actions and perceptions share a common representation with bidirectional associations between the two. Thus, in this view, not only does perception select actions (along with task context), but actions are also used to generate perceptions (i.e. intended effects). We propose a neural model that implements TEC to carry out sequential action control in hierarchically structured tasks such as coffee-making. Unlike traditional feedforward discrete-time neural network models, which use static percepts to generate static outputs, our biological model accepts continuous-time inputs and likewise generates non-stationary outputs, making short-timescale dynamic predictions. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Effortless assignment with 4D covariance sequential correlation maps.

Science.gov (United States)

Harden, Bradley J; Mishra, Subrata H; Frueh, Dominique P

2015-11-01

Traditional Nuclear Magnetic Resonance (NMR) assignment procedures for proteins rely on preliminary peak-picking to identify and label NMR signals. However, such an approach has severe limitations when signals are erroneously labeled or completely neglected. The consequences are especially grave for proteins with substantial peak overlap, and mistakes can often thwart entire projects. To overcome these limitations, we previously introduced an assignment technique that bypasses traditional pick peaking altogether. Covariance Sequential Correlation Maps (COSCOMs) transform the indirect connectivity information provided by multiple 3D backbone spectra into direct (H, N) to (H, N) correlations. Here, we present an updated method that utilizes a single four-dimensional spectrum rather than a suite of three-dimensional spectra. We demonstrate the advantages of 4D-COSCOMs relative to their 3D counterparts. We introduce improvements accelerating their calculation. We discuss practical considerations affecting their quality. And finally we showcase their utility in the context of a 52 kDa cyclization domain from a non-ribosomal peptide synthetase. Copyright © 2015 Elsevier Inc. All rights reserved.

Performance evaluation of integrated fuel processor for residential PEMFCs application

International Nuclear Information System (INIS)

Yu Taek Seo; Dong Joo Seo; Young-Seog Seo; Hyun-Seog Roh; Wang Lai Yoon; Jin Hyeok Jeong

2006-01-01

KIER has been developing the natural gas fuel processor to produce hydrogen rich gas for residential PEMFCs system. To realize a compact and high efficiency, the unit processes of steam reforming, water gas shift, and preferential oxidation are chemically and physically integrated in a package. Current fuel processor designed for 1 kW class PEMFCs shows thermal efficiency of 78% as a HHV basis with methane conversion of 90% at rated load operation. CO concentration below 10 ppm in the produced gas is achieved with preferential oxidation unit using Pt and Ru based catalyst under the condition of [O 2 ]/[CO]=2.0. The partial load operation have been carried out to test the performance of fuel processor from 40% to 80% load, showing stable methane conversion and CO concentration below 10 ppm. The durability test for the daily start-stop and 8 hr operation procedure is under investigation and shows no deterioration of its performance after 40 start-stop cycles. (authors)

Radiation Tolerant Software Defined Video Processor, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — MaXentric's is proposing a radiation tolerant Software Define Video Processor, codenamed SDVP, for the problem of advanced motion imaging in the space environment....

The fast tracker processor for hadronic collider triggers

CERN Document Server

Annovi, A; Bardi, A; Carosi, R; Dell'Orso, Mauro; D'Onofrio, M; Giannetti, P; Iannaccone, G; Morsani, F; Pietri, M; Varotto, G

2000-01-01

Perspective for precise and fast track reconstruction in future hadronic collider experiments are addressed. We discuss the feasibility of a pipelined highly parallelized processor dedicated to the implementation of a very fast algorithm. The algorithm is based on the use of a large bank of pre-stored combinations of trajectory points (patterns) for extremely complex tracking systems. The CMS experiment at LHC is used as a benchmark. Tracking data from the events selected by the level-1 trigger are sorted and filtered by the Fast Tracker processor at a rate of 100 kHz. This data organization allows the level-2 trigger logic to reconstruct full resolution traces with transverse momentum above few GeV and search secondary vertexes within typical level-2 times. 15 Refs.

Digital implementation of the preloaded filter pulse processor

International Nuclear Information System (INIS)

Westphal, G.P.; Cadek, G.R.; Keroe, N.; Sauter, TH.; Thorwartl, P.C.

1995-01-01

Adapting it's processing time to the respective pulse intervals, the Preloaded Filter (PLF) pulse processor offers optimum resolution together with highest possible throughput rates. The PLF algorithm could be formulated in a recursive manner which made possible it's implementation by means of a large field-programmable gate array, as a fast, pipe-lined digital processor with 10 MHz maximum throughput rate. While pre-filter digitization by an ADC with 12 bit resolution and 10M Hz sampling rate resulted in a poorer resolution than that of an analog filter, a digital PLF based on an ADC with 14 bit resolution and 10 MHz sampling rate, surpassed high-quality analog filters in resolution, throughput rate and long-term stability. (author) 6 refs.; 7 figs

Biological Water Processor and Forward Osmosis Secondary Treatment

Science.gov (United States)

Shull, Sarah; Meyer, Caitlin

2014-01-01

The goal of the Biological Water Processor (BWP) is to remove 90% organic carbon and 75% ammonium from an exploration-based wastewater stream for four crew members. The innovative design saves on space, power and consumables as compared to the ISS Urine Processor Assembly (UPA) by utilizing microbes in a biofilm. The attached-growth system utilizes simultaneous nitrification and denitrification to mineralize organic carbon and ammonium to carbon dioxide and nitrogen gas, which can be scrubbed in a cabin air revitalization system. The BWP uses a four-crew wastewater comprised of urine and humidity condensate, as on the ISS, but also includes hygiene (shower, shave, hand washing and oral hygiene) and laundry. The BWP team donates 58L per day of this wastewater processed in Building 7.

Dual shear plate power processor packaging design. [for Solar Electric Propulsion spacecraft

Science.gov (United States)

Franzon, A. O.; Fredrickson, C. D.; Ross, R. G.

1975-01-01

The use of solar electric propulsion (SEP) for spacecraft primary propulsion imposes an extreme range of operational and environmental design requirements associated with the diversity of missions for which solar electric primary propulsion is advantageous. One SEP element which is particularly sensitive to these environmental extremes is the power processor unit (PPU) which powers and controls the electric ion thruster. An improved power processor thermal-mechanical packaging approach, referred to as dual shear plate packaging, has been designed to accommodate these different requirements with minimum change to the power processor design. Details of this packaging design are presented together with test results obtained from thermal-vacuum and structural-vibration tests conducted with prototype hardware.

Parallel processor programs in the Federal Government

Science.gov (United States)

Schneck, P. B.; Austin, D.; Squires, S. L.; Lehmann, J.; Mizell, D.; Wallgren, K.

1985-01-01

In 1982, a report dealing with the nation's research needs in high-speed computing called for increased access to supercomputing resources for the research community, research in computational mathematics, and increased research in the technology base needed for the next generation of supercomputers. Since that time a number of programs addressing future generations of computers, particularly parallel processors, have been started by U.S. government agencies. The present paper provides a description of the largest government programs in parallel processing. Established in fiscal year 1985 by the Institute for Defense Analyses for the National Security Agency, the Supercomputing Research Center will pursue research to advance the state of the art in supercomputing. Attention is also given to the DOE applied mathematical sciences research program, the NYU Ultracomputer project, the DARPA multiprocessor system architectures program, NSF research on multiprocessor systems, ONR activities in parallel computing, and NASA parallel processor projects.

Nonlinear Wave Simulation on the Xeon Phi Knights Landing Processor

OpenAIRE

Hristov Ivan; Goranov Goran; Hristova Radoslava

2018-01-01

We consider an interesting from computational point of view standing wave simulation by solving coupled 2D perturbed Sine-Gordon equations. We make an OpenMP realization which explores both thread and SIMD levels of parallelism. We test the OpenMP program on two different energy equivalent Intel architectures: 2× Xeon E5-2695 v2 processors, (code-named “Ivy Bridge-EP”) in the Hybrilit cluster, and Xeon Phi 7250 processor (code-named “Knights Landing” (KNL). The results show 2 times better per...

Global synchronization of parallel processors using clock pulse width modulation

Science.gov (United States)

Chen, Dong; Ellavsky, Matthew R.; Franke, Ross L.; Gara, Alan; Gooding, Thomas M.; Haring, Rudolf A.; Jeanson, Mark J.; Kopcsay, Gerard V.; Liebsch, Thomas A.; Littrell, Daniel; Ohmacht, Martin; Reed, Don D.; Schenck, Brandon E.; Swetz, Richard A.

2013-04-02

A circuit generates a global clock signal with a pulse width modification to synchronize processors in a parallel computing system. The circuit may include a hardware module and a clock splitter. The hardware module may generate a clock signal and performs a pulse width modification on the clock signal. The pulse width modification changes a pulse width within a clock period in the clock signal. The clock splitter may distribute the pulse width modified clock signal to a plurality of processors in the parallel computing system.

Quantum Inequalities and Sequential Measurements

International Nuclear Information System (INIS)

Candelpergher, B.; Grandouz, T.; Rubinx, J.L.

2011-01-01

In this article, the peculiar context of sequential measurements is chosen in order to analyze the quantum specificity in the two most famous examples of Heisenberg and Bell inequalities: Results are found at some interesting variance with customary textbook materials, where the context of initial state re-initialization is described. A key-point of the analysis is the possibility of defining Joint Probability Distributions for sequential random variables associated to quantum operators. Within the sequential context, it is shown that Joint Probability Distributions can be defined in situations where not all of the quantum operators (corresponding to random variables) do commute two by two. (authors)

Pathway Processor 2.0: a web resource for pathway-based analysis of high-throughput data.

Science.gov (United States)

Beltrame, Luca; Bianco, Luca; Fontana, Paolo; Cavalieri, Duccio

2013-07-15

Pathway Processor 2.0 is a web application designed to analyze high-throughput datasets, including but not limited to microarray and next-generation sequencing, using a pathway centric logic. In addition to well-established methods such as the Fisher's test and impact analysis, Pathway Processor 2.0 offers innovative methods that convert gene expression into pathway expression, leading to the identification of differentially regulated pathways in a dataset of choice. Pathway Processor 2.0 is available as a web service at http://compbiotoolbox.fmach.it/pathwayProcessor/. Sample datasets to test the functionality can be used directly from the application. duccio.cavalieri@fmach.it Supplementary data are available at Bioinformatics online.

Space Station Water Processor Process Pump

Science.gov (United States)

Parker, David

1995-01-01

This report presents the results of the development program conducted under contract NAS8-38250-12 related to the International Space Station (ISS) Water Processor (WP) Process Pump. The results of the Process Pumps evaluation conducted on this program indicates that further development is required in order to achieve the performance and life requirements for the ISSWP.

Modcomp MAX IV System Processors reference guide

Energy Technology Data Exchange (ETDEWEB)

Cummings, J.

1990-10-01

A user almost always faces a big problem when having to learn to use a new computer system. The information necessary to use the system is often scattered throughout many different manuals. The user also faces the problem of extracting the information really needed from each manual. Very few computer vendors supply a single Users Guide or even a manual to help the new user locate the necessary manuals. Modcomp is no exception to this, Modcomp MAX IV requires that the user be familiar with the system file usage which adds to the problem. At General Atomics there is an ever increasing need for new users to learn how to use the Modcomp computers. This paper was written to provide a condensed Users Reference Guide'' for Modcomp computer users. This manual should be of value not only to new users but any users that are not Modcomp computer systems experts. This Users Reference Guide'' is intended to provided the basic information for the use of the various Modcomp System Processors necessary to, create, compile, link-edit, and catalog a program. Only the information necessary to provide the user with a basic understanding of the Systems Processors is included. This document provides enough information for the majority of programmers to use the Modcomp computers without having to refer to any other manuals. A lot of emphasis has been placed on the file description and usage for each of the System Processors. This allows the user to understand how Modcomp MAX IV does things rather than just learning the system commands.

A pre- and post-processor for the ICOOL muon transport code

International Nuclear Information System (INIS)

Fawley, W.M.

2001-01-01

ICOOL[1] is a Fortran77 macroparticle transport code widely used by researchers to study the front end of a neutrino factory/muon collider[2]. In part due to the desire that ICOOL be usable over multiple computer platforms and operating systems, the code uses simple text files for input/output services. This choice together with user-driven requests for greater and greater choice of lattice element type and configuration has led to ICOOL input decks becoming rather difficult to compose and modify easily. Moreover, the lack of a standard graphical post-processor has prevented many ICOOL users from extracting all but the most simple results from the output files. Here I present two attempts to improve this situation: First, a simple but quite general graphical pre-processor (NIME) written in the Tcl/TK[3] to permit users to write and maintain ASCII-formatted input files by use of simple macro definitions and expansions. Second, an interactive post-processor written in Fortran90 and NCAR graphics, which allows users to define, extract, and then examine the behavior of various particle subsets. In this paper I show some examples of use of both the pre- and post-processor for a standard ICOOL run

Making the black box signal processor transparent explains the contradictions in x-ray spectroscopy

International Nuclear Information System (INIS)

Papp, T.; Maxwell, J.A.; Papp, A.T.

2008-01-01

Full text: There are significant differences in the experimental data needed in the analysis of x-ray spectra, and many of the results contradict basic conservation laws and simple arithmetic. We have identified that the main source of the unexplainable results is rooted in the signal processing electronics. We have developed a line of fully digital signal processors that have yielded improved resolution, line shape, tailing and pile up recognition. The signal processor is a time variant, non-paralyzable signal processor. The signal processor accounts for and registers all events, sorting them into two spectra, one spectrum for the desirable or accepted events, and one spectrum for the rejected events. Although the information on the rejected events is always necessary, we recently realized its additional benefits in high rate, (10 5 -10 6 cps) analytical measurements. Having all information available we were surprised to see how different conclusions and level of understandings are possible in detector characterization, detector efficiency, spectrum evaluation methodology, and that it explains many of the contradictions. We will demonstrate how the Coster-Kronig transition measurements often do not even comply with arithmetic, and why is it difficult to interpret the spectra with other processors. It will be presented that for different spectra in origin, like radioisotope measurements, x-ray fluorescence, and particle induced x-ray emission, the primary signal from the preamplifier is so different, that the signal processor is facing very different challenges, and different metrological approaches are necessary in data processing. This data processing methodology cannot be established on the partial and fractional information offered by other approaches. However, the maximum information utilization approach offered by our processor's rejected spectrum supplements the accepted spectrum to allow the development of straight forward and accurate metrology. All the

Tinuso: A processor architecture for a multi-core hardware simulation platform

DEFF Research Database (Denmark)

Schleuniger, Pascal; Karlsson, Sven

2010-01-01

Multi-core systems have the potential to improve performance, energy and cost properties of embedded systems but also require new design methods and tools to take advantage of the new architectures. Due to the limited accuracy and performance of pure software simulators, we are working on a cycle...... accurate hardware simulation platform. We have developed the Tinuso processor architecture for this platform. Tinuso is a processor architecture optimized for FPGA implementation. The instruction set makes use of predicated instructions and supports C/C++ and assembly language programming. It is designed...... to be easy extendable to maintain the exibility required for the research on multi-core systems. Tinuso contains a co-processor interface to connect to a network interface. This interface allow for communication over an on-chip network. A clock frequency estimation study on a deeply pipelined Tinuso...

PERFORMANCE EVALUATION OF OR1200 PROCESSOR WITH EVOLUTIONARY PARALLEL HPRC USING GEP

Directory of Open Access Journals (Sweden)

R. Maheswari

2012-04-01

Full Text Available In this fast computing era, most of the embedded system requires more computing power to complete the complex function/ task at the lesser amount of time. One way to achieve this is by boosting up the processor performance which allows processor core to run faster. This paper presents a novel technique of increasing the performance by parallel HPRC (High Performance Reconfigurable Computing in the CPU/DSP (Digital Signal Processor unit of OR1200 (Open Reduced Instruction Set Computer (RISC 1200 using Gene Expression Programming (GEP an evolutionary programming model. OR1200 is a soft-core RISC processor of the Intellectual Property cores that can efficiently run any modern operating system. In the manufacturing process of OR1200 a parallel HPRC is placed internally in the Integer Execution Pipeline unit of the CPU/DSP core to increase the performance. The GEP Parallel HPRC is activated /deactivated by triggering the signals i HPRC_Gene_Start ii HPRC_Gene_End. A Verilog HDL(Hardware Description language functional code for Gene Expression Programming parallel HPRC is developed and synthesised using XILINX ISE in the former part of the work and a CoreMark processor core benchmark is used to test the performance of the OR1200 soft core in the later part of the work. The result of the implementation ensures the overall speed-up increased to 20.59% by GEP based parallel HPRC in the execution unit of OR1200.

Bounds on achievable accuracy in analog optical linear-algebra processors

Science.gov (United States)

Batsell, Stephen G.; Walkup, John F.; Krile, Thomas F.

1990-07-01

Upper arid lower bounds on the number of bits of accuracy achievable are determined by applying a seconth-ortler statistical model to the linear algebra processor. The use of bounds was found necessary due to the strong signal-dependence of the noise at the output of the optical linear algebra processor (OLAP). 1 1. ACCURACY BOUNDS One of the limiting factors in applying OLAPs to real world problems has been the poor achievable accuracy of these processors. Little previous research has been done on determining noise sources from a systems perspective which would include noise generated in the multiplication ard addition operations spatial variations across arrays and crosstalk. We have previously examined these noise sources and determined a general model for the output noise mean and variance. The model demonstrates a strony signaldependency in the noise at the output of the processor which has been confirmed by our experiments. 1 We define accuracy similar to its definition for an analog signal input to an analog-to-digital (ND) converter. The number of bits of accuracy achievable is related to the log (base 2) of the number of separable levels at the P/D converter output. The number of separable levels is fouri by dividing the dynamic range by m times the standard deviation of the signal a. 2 Here m determines the error rate in the P/D conversion. The dynamic range can be expressed as the

Parallel Processor for 3D Recovery from Optical Flow

Directory of Open Access Journals (Sweden)

Jose Hugo Barron-Zambrano

2009-01-01

Full Text Available 3D recovery from motion has received a major effort in computer vision systems in the recent years. The main problem lies in the number of operations and memory accesses to be performed by the majority of the existing techniques when translated to hardware or software implementations. This paper proposes a parallel processor for 3D recovery from optical flow. Its main feature is the maximum reuse of data and the low number of clock cycles to calculate the optical flow, along with the precision with which 3D recovery is achieved. The results of the proposed architecture as well as those from processor synthesis are presented.

Cassava processors' awareness of occupational and environmental ...

African Journals Online (AJOL)

A larger percentage (74.5%) of the respondents indicated that the Agricultural Development Programme (ADP) is their source of information. The result also showed that processor's awareness of occupational hazards associated with the different stages of cassava processing vary because their involvement in these stages

Media processors using a new microsystem architecture designed for the Internet era

Science.gov (United States)

Wyland, David C.

1999-12-01

The demands of digital image processing, communications and multimedia applications are growing more rapidly than traditional design methods can fulfill them. Previously, only custom hardware designs could provide the performance required to meet the demands of these applications. However, hardware design has reached a crisis point. Hardware design can no longer deliver a product with the required performance and cost in a reasonable time for a reasonable risk. Software based designs running on conventional processors can deliver working designs in a reasonable time and with low risk but cannot meet the performance requirements. What is needed is a media processing approach that combines very high performance, a simple programming model, complete programmability, short time to market and scalability. The Universal Micro System (UMS) is a solution to these problems. The UMS is a completely programmable (including I/O) system on a chip that combines hardware performance with the fast time to market, low cost and low risk of software designs.

The application of charge-coupled device processors in automatic-control systems

Science.gov (United States)

Mcvey, E. S.; Parrish, E. A., Jr.

1977-01-01

The application of charge-coupled device (CCD) processors to automatic-control systems is suggested. CCD processors are a new form of semiconductor component with the unique ability to process sampled signals on an analog basis. Specific implementations of controllers are suggested for linear time-invariant, time-varying, and nonlinear systems. Typical processing time should be only a few microseconds. This form of technology may become competitive with microprocessors and minicomputers in addition to supplementing them.

Very wide register : an asymmetric register file organization for low power embedded processors.

NARCIS (Netherlands)

Raghavan, P.; Lambrechts, A.; Jayapala, M.; Catthoor, F.; Verkest, D.T.M.L.; Corporaal, H.

2007-01-01

In current embedded systems processors, multi-ported register files are one of the most power hungry parts of the processor, even when they are clustered. This paper presents a novel register file architecture, which has single ported cells and asymmetric interfaces to the memory and to the

7 CFR 201.73 - Processors and processing of all classes of certified seed.

Science.gov (United States)

2010-01-01

... (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Certified Seed § 201.73 Processors and processing... of certified seed: (a) Facilities shall be available to perform processing without introducing... 7 Agriculture 3 2010-01-01 2010-01-01 false Processors and processing of all classes of certified...

Homogeneity corrections in the Anger camera with micro-Z processor

International Nuclear Information System (INIS)

Knoop, B.; Jordan, K.

1979-01-01

Series of measurements largely covering the area of clinical use of the Anger camera were carried out to investigate the mode of action of inhomogeneity correction by the micro-Z processor. The variation of boundary conditions of measurements when measuring in patients is simulated as closely as possible by selecting suitable measuring arrangements. The measured results confirm both the concepts outlined above on the causes of inhomogeneity of the Anger camera and the suitability for inhomogeneity correction under clinical conditions of the methods applied in the micro-Z processor. (orig./HP) [de

Accuracy requirements of optical linear algebra processors in adaptive optics imaging systems

Science.gov (United States)

Downie, John D.

1990-01-01

A ground-based adaptive optics imaging telescope system attempts to improve image quality by detecting and correcting for atmospherically induced wavefront aberrations. The required control computations during each cycle will take a finite amount of time. Longer time delays result in larger values of residual wavefront error variance since the atmosphere continues to change during that time. Thus an optical processor may be well-suited for this task. This paper presents a study of the accuracy requirements in a general optical processor that will make it competitive with, or superior to, a conventional digital computer for the adaptive optics application. An optimization of the adaptive optics correction algorithm with respect to an optical processor's degree of accuracy is also briefly discussed.

21 CFR 864.3875 - Automated tissue processor.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated tissue processor. 864.3875 Section 864.3875 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Pathology Instrumentation and Accessories § 864.3875...

Interleaved Subtask Scheduling on Multi Processor SOC

NARCIS (Netherlands)

Zhe, M.

2006-01-01

The ever-progressing semiconductor processing technique has integrated more and more embedded processors on a single system-on-achip (SoC). With such powerful SoC platforms, and also due to the stringent time-to-market deadlines, many functionalities which used to be implemented in ASICs are

Operation of the upgraded ATLAS Central Trigger Processor during the LHC Run 2

DEFF Research Database (Denmark)

Bertelsen, H.; Montoya, G. Carrillo; Deviveiros, P. O.

2016-01-01

The ATLAS Central Trigger Processor (CTP) is responsible for forming the Level-1 trigger decision based on the information from the calorimeter and muon trigger processors. In order to cope with the increase of luminosity and physics cross-sections in Run 2, several components of this system have...

The fast tracker processor for hadron collider triggers

CERN Document Server

Annovi, A; Bardi, A; Carosi, R; Dell'Orso, Mauro; D'Onofrio, M; Giannetti, P; Iannaccone, G; Morsani, E; Pietri, M; Varotto, G

2001-01-01

Perspectives for precise and fast track reconstruction in future hadron collider experiments are addressed. We discuss the feasibility of a pipelined highly parallel processor dedicated to the implementation of a very fast tracking algorithm. The algorithm is based on the use of a large bank of pre-stored combinations of trajectory points, called patterns, for extremely complex tracking systems. The CMS experiment at LHC is used as a benchmark. Tracking data from the events selected by the level-1 trigger are sorted and filtered by the Fast Tracker processor at an input rate of 100 kHz. This data organization allows the level-2 trigger logic to reconstruct full resolution tracks with transverse momentum above a few GeV and search for secondary vertices within typical level-2 times. (15 refs).

A VLSI image processor via pseudo-mersenne transforms

International Nuclear Information System (INIS)

Sei, W.J.; Jagadeesh, J.M.

1986-01-01

The computational burden on image processing in medical fields where a large amount of information must be processed quickly and accurately has led to consideration of special-purpose image processor chip design for some time. The very large scale integration (VLSI) resolution has made it cost-effective and feasible to consider the design of special purpose chips for medical imaging fields. This paper describes a VLSI CMOS chip suitable for parallel implementation of image processing algorithms and cyclic convolutions by using Pseudo-Mersenne Number Transform (PMNT). The main advantages of the PMNT over the Fast Fourier Transform (FFT) are: (1) no multiplications are required; (2) integer arithmetic is used. The design and development of this processor, which operates on 32-point convolution or 5 x 5 window image, are described

Sequential Generalized Transforms on Function Space

Directory of Open Access Journals (Sweden)

Jae Gil Choi

2013-01-01

Full Text Available We define two sequential transforms on a function space Ca,b[0,T] induced by generalized Brownian motion process. We then establish the existence of the sequential transforms for functionals in a Banach algebra of functionals on Ca,b[0,T]. We also establish that any one of these transforms acts like an inverse transform of the other transform. Finally, we give some remarks about certain relations between our sequential transforms and other well-known transforms on Ca,b[0,T].

MULTI-CORE AND OPTICAL PROCESSOR RELATED APPLICATIONS RESEARCH AT OAK RIDGE NATIONAL LABORATORY

Energy Technology Data Exchange (ETDEWEB)

Barhen, Jacob [ORNL; Kerekes, Ryan A [ORNL; ST Charles, Jesse Lee [ORNL; Buckner, Mark A [ORNL

2008-01-01

High-speed parallelization of common tasks holds great promise as a low-risk approach to achieving the significant increases in signal processing and computational performance required for next generation innovations in reconfigurable radio systems. Researchers at the Oak Ridge National Laboratory have been working on exploiting the parallelization offered by this emerging technology and applying it to a variety of problems. This paper will highlight recent experience with four different parallel processors applied to signal processing tasks that are directly relevant to signal processing required for SDR/CR waveforms. The first is the EnLight Optical Core Processor applied to matched filter (MF) correlation processing via fast Fourier transform (FFT) of broadband Dopplersensitive waveforms (DSW) using active sonar arrays for target tracking. The second is the IBM CELL Broadband Engine applied to 2-D discrete Fourier transform (DFT) kernel for image processing and frequency domain processing. And the third is the NVIDIA graphical processor applied to document feature clustering. EnLight Optical Core Processor. Optical processing is inherently capable of high-parallelism that can be translated to very high performance, low power dissipation computing. The EnLight 256 is a small form factor signal processing chip (5x5 cm2) with a digital optical core that is being developed by an Israeli startup company. As part of its evaluation of foreign technology, ORNL's Center for Engineering Science Advanced Research (CESAR) had access to a precursor EnLight 64 Alpha hardware for a preliminary assessment of capabilities in terms of large Fourier transforms for matched filter banks and on applications related to Doppler-sensitive waveforms. This processor is optimized for array operations, which it performs in fixed-point arithmetic at the rate of 16 TeraOPS at 8-bit precision. This is approximately 1000 times faster than the fastest DSP available today. The optical core

MULTI-CORE AND OPTICAL PROCESSOR RELATED APPLICATIONS RESEARCH AT OAK RIDGE NATIONAL LABORATORY

International Nuclear Information System (INIS)

Barhen, Jacob; Kerekes, Ryan A.; St Charles, Jesse Lee; Buckner, Mark A.

2008-01-01

High-speed parallelization of common tasks holds great promise as a low-risk approach to achieving the significant increases in signal processing and computational performance required for next generation innovations in reconfigurable radio systems. Researchers at the Oak Ridge National Laboratory have been working on exploiting the parallelization offered by this emerging technology and applying it to a variety of problems. This paper will highlight recent experience with four different parallel processors applied to signal processing tasks that are directly relevant to signal processing required for SDR/CR waveforms. The first is the EnLight Optical Core Processor applied to matched filter (MF) correlation processing via fast Fourier transform (FFT) of broadband Dopplersensitive waveforms (DSW) using active sonar arrays for target tracking. The second is the IBM CELL Broadband Engine applied to 2-D discrete Fourier transform (DFT) kernel for image processing and frequency domain processing. And the third is the NVIDIA graphical processor applied to document feature clustering. EnLight Optical Core Processor. Optical processing is inherently capable of high-parallelism that can be translated to very high performance, low power dissipation computing. The EnLight 256 is a small form factor signal processing chip (5x5 cm2) with a digital optical core that is being developed by an Israeli startup company. As part of its evaluation of foreign technology, ORNL's Center for Engineering Science Advanced Research (CESAR) had access to a precursor EnLight 64 Alpha hardware for a preliminary assessment of capabilities in terms of large Fourier transforms for matched filter banks and on applications related to Doppler-sensitive waveforms. This processor is optimized for array operations, which it performs in fixed-point arithmetic at the rate of 16 TeraOPS at 8-bit precision. This is approximately 1000 times faster than the fastest DSP available today. The optical core

A High-Speed and Low-Energy-Consumption Processor for SVD-MIMO-OFDM Systems

Directory of Open Access Journals (Sweden)

Hiroki Iwaizumi

2013-01-01

Full Text Available A processor design for singular value decomposition (SVD and compression/decompression of feedback matrices, which are mandatory operations for SVD multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM systems, is proposed and evaluated. SVD-MIMO is a transmission method for suppressing multistream interference and improving communication quality by beamforming. An application specific instruction-set processor (ASIP architecture is adopted to achieve flexibility in terms of operations and matrix size. The proposed processor realizes a high-speed/low-power design and real-time processing by the parallelization of floating-point units (FPUs and arithmetic instructions specialized in complex matrix operations.

Natrium: Use of FPGA embedded processors for real-time data compression

Energy Technology Data Exchange (ETDEWEB)

Ammendola, R; Salamon, A; Salina, G [INFN Sezione di Roma Tor Vergata, Rome (Italy); Biagioni, A; Frezza, O; Cicero, F Lo; Lonardo, A; Rossetti, D; Simula, F; Tosoratto, L; Vicini, P [INFN Sezione di Roma, Rome (Italy)

2011-12-15

We present test results and characterization of a data compression system for the readout of the NA62 liquid krypton calorimeter trigger processor. The Level-0 electromagnetic calorimeter trigger processor of the NA62 experiment at CERN receives digitized data from the calorimeter main readout board. These data are stored on an on-board DDR2 RAM memory and read out upon reception of a Level-0 accept signal. The maximum raw data throughput from the trigger front-end cards is 2.6 Gbps. To readout these data over two Gbit Ethernet interfaces we investigated different implementations of a data compression system based on the Rice-Golomb coding: one is implemented in the FPGA as a custom block and one is implemented on the FPGA embedded processor running a C code. The two implementations are tested on a set of sample events and compared with respect to achievable readout bandwidth.

Natrium: Use of FPGA embedded processors for real-time data compression

International Nuclear Information System (INIS)

Ammendola, R; Salamon, A; Salina, G; Biagioni, A; Frezza, O; Cicero, F Lo; Lonardo, A; Rossetti, D; Simula, F; Tosoratto, L; Vicini, P

2011-01-01

We present test results and characterization of a data compression system for the readout of the NA62 liquid krypton calorimeter trigger processor. The Level-0 electromagnetic calorimeter trigger processor of the NA62 experiment at CERN receives digitized data from the calorimeter main readout board. These data are stored on an on-board DDR2 RAM memory and read out upon reception of a Level-0 accept signal. The maximum raw data throughput from the trigger front-end cards is 2.6 Gbps. To readout these data over two Gbit Ethernet interfaces we investigated different implementations of a data compression system based on the Rice-Golomb coding: one is implemented in the FPGA as a custom block and one is implemented on the FPGA embedded processor running a C code. The two implementations are tested on a set of sample events and compared with respect to achievable readout bandwidth.

Scalable architecture for a room temperature solid-state quantum information processor.

Science.gov (United States)

Yao, N Y; Jiang, L; Gorshkov, A V; Maurer, P C; Giedke, G; Cirac, J I; Lukin, M D

2012-04-24

The realization of a scalable quantum information processor has emerged over the past decade as one of the central challenges at the interface of fundamental science and engineering. Here we propose and analyse an architecture for a scalable, solid-state quantum information processor capable of operating at room temperature. Our approach is based on recent experimental advances involving nitrogen-vacancy colour centres in diamond. In particular, we demonstrate that the multiple challenges associated with operation at ambient temperature, individual addressing at the nanoscale, strong qubit coupling, robustness against disorder and low decoherence rates can be simultaneously achieved under realistic, experimentally relevant conditions. The architecture uses a novel approach to quantum information transfer and includes a hierarchy of control at successive length scales. Moreover, it alleviates the stringent constraints currently limiting the realization of scalable quantum processors and will provide fundamental insights into the physics of non-equilibrium many-body quantum systems.

Multi-mode sensor processing on a dynamically reconfigurable massively parallel processor array

Science.gov (United States)

Chen, Paul; Butts, Mike; Budlong, Brad; Wasson, Paul

2008-04-01

This paper introduces a novel computing architecture that can be reconfigured in real time to adapt on demand to multi-mode sensor platforms' dynamic computational and functional requirements. This 1 teraOPS reconfigurable Massively Parallel Processor Array (MPPA) has 336 32-bit processors. The programmable 32-bit communication fabric provides streamlined inter-processor connections with deterministically high performance. Software programmability, scalability, ease of use, and fast reconfiguration time (ranging from microseconds to milliseconds) are the most significant advantages over FPGAs and DSPs. This paper introduces the MPPA architecture, its programming model, and methods of reconfigurability. An MPPA platform for reconfigurable computing is based on a structural object programming model. Objects are software programs running concurrently on hundreds of 32-bit RISC processors and memories. They exchange data and control through a network of self-synchronizing channels. A common application design pattern on this platform, called a work farm, is a parallel set of worker objects, with one input and one output stream. Statically configured work farms with homogeneous and heterogeneous sets of workers have been used in video compression and decompression, network processing, and graphics applications.

Forced Sequence Sequential Decoding

DEFF Research Database (Denmark)

Jensen, Ole Riis; Paaske, Erik

1998-01-01

We describe a new concatenated decoding scheme based on iterations between an inner sequentially decoded convolutional code of rate R=1/4 and memory M=23, and block interleaved outer Reed-Solomon (RS) codes with nonuniform profile. With this scheme decoding with good performance is possible as low...... as Eb/N0=0.6 dB, which is about 1.25 dB below the signal-to-noise ratio (SNR) that marks the cutoff rate for the full system. Accounting for about 0.45 dB due to the outer codes, sequential decoding takes place at about 1.7 dB below the SNR cutoff rate for the convolutional code. This is possible since...... the iteration process provides the sequential decoders with side information that allows a smaller average load and minimizes the probability of computational overflow. Analytical results for the probability that the first RS word is decoded after C computations are presented. These results are supported...

'Iconic' tracking algorithms for high energy physics using the TRAX-I massively parallel processor

International Nuclear Information System (INIS)

Vesztergombi, G.

1989-01-01

TRAX-I, a cost-effective parallel microcomputer, applying associative string processor (ASP) architecture with 16 K parallel processing elements, is being built by Aspex Microsystems Ltd. (UK). When applied to the tracking problem of very complex events with several hundred tracks, the large number of processors allows one to dedicate one or more processors to each wire (in MWPC), each pixel (in digitized images from streamer chambers or other visual detectors), or each pad (in TPC) to perform very efficient pattern recognition. Some linear tracking algorithms based on this ''ionic'' representation are presented. (orig.)

'Iconic' tracking algorithms for high energy physics using the TRAX-I massively parallel processor

International Nuclear Information System (INIS)

Vestergombi, G.

1989-11-01

TRAX-I, a cost-effective parallel microcomputer, applying Associative String Processor (ASP) architecture with 16 K parallel processing elements, is being built by Aspex Microsystems Ltd. (UK). When applied to the tracking problem of very complex events with several hundred tracks, the large number of processors allows one to dedicate one or more processors to each wire (in MWPC), each pixel (in digitized images from streamer chambers or other visual detectors), or each pad (in TPC) to perform very efficient pattern recognition. Some linear tracking algorithms based on this 'iconic' representation are presented. (orig.)

Noise limitations in optical linear algebra processors.

Science.gov (United States)

Batsell, S G; Jong, T L; Walkup, J F; Krile, T F

1990-05-10

A general statistical noise model is presented for optical linear algebra processors. A statistical analysis which includes device noise, the multiplication process, and the addition operation is undertaken. We focus on those processes which are architecturally independent. Finally, experimental results which verify the analytical predictions are also presented.

Sojourn time asymptotics in processor-sharing queues

NARCIS (Netherlands)

Borst, S.C.; Núñez Queija, R.; Zwart, B.

2006-01-01

Over the past few decades, the Processor-Sharing (PS) discipline has attracted a great deal of attention in the queueing literature. While the PS paradigm emerged in the sixties as an idealization of round-robin scheduling in time-shared computer systems, it has recently captured renewed interest as

Sequential probability ratio controllers for safeguards radiation monitors

International Nuclear Information System (INIS)

Fehlau, P.E.; Coop, K.L.; Nixon, K.V.

1984-01-01

Sequential hypothesis tests applied to nuclear safeguards accounting methods make the methods more sensitive to detecting diversion. The sequential tests also improve transient signal detection in safeguards radiation monitors. This paper describes three microprocessor control units with sequential probability-ratio tests for detecting transient increases in radiation intensity. The control units are designed for three specific applications: low-intensity monitoring with Poisson probability ratios, higher intensity gamma-ray monitoring where fixed counting intervals are shortened by sequential testing, and monitoring moving traffic where the sequential technique responds to variable-duration signals. The fixed-interval controller shortens a customary 50-s monitoring time to an average of 18 s, making the monitoring delay less bothersome. The controller for monitoring moving vehicles benefits from the sequential technique by maintaining more than half its sensitivity when the normal passage speed doubles

A Time-Composable Operating System for the Patmos Processor

DEFF Research Database (Denmark)

Ziccardi, Marco; Schoeberl, Martin; Vardanega, Tullio

2015-01-01

-composable operating system, on top of a time-composable processor, facilitates incremental development, which is highly desirable for industry. This paper makes a twofold contribution. First, we present enhancements to the Patmos processor to allow achieving time composability at the operating system level. Second......, we extend an existing time-composable operating system, TiCOS, to make best use of advanced Patmos hardware features in the pursuit of time composability.......In the last couple of decades we have witnessed a steady growth in the complexity and widespread of real-time systems. In order to master the rising complexity in the timing behaviour of those systems, rightful attention has been given to the development of time-predictable computer architectures...

Biased lineups: sequential presentation reduces the problem.

Science.gov (United States)

Lindsay, R C; Lea, J A; Nosworthy, G J; Fulford, J A; Hector, J; LeVan, V; Seabrook, C

1991-12-01

Biased lineups have been shown to increase significantly false, but not correct, identification rates (Lindsay, Wallbridge, & Drennan, 1987; Lindsay & Wells, 1980; Malpass & Devine, 1981). Lindsay and Wells (1985) found that sequential lineup presentation reduced false identification rates, presumably by reducing reliance on relative judgment processes. Five staged-crime experiments were conducted to examine the effect of lineup biases and sequential presentation on eyewitness recognition accuracy. Sequential lineup presentation significantly reduced false identification rates from fair lineups as well as from lineups biased with regard to foil similarity, instructions, or witness attire, and from lineups biased in all of these ways. The results support recommendations that police present lineups sequentially.

A Geometric Algebra Co-Processor for Color Edge Detection

Directory of Open Access Journals (Sweden)

Biswajit Mishra

2015-01-01

Full Text Available This paper describes advancement in color edge detection, using a dedicated Geometric Algebra (GA co-processor implemented on an Application Specific Integrated Circuit (ASIC. GA provides a rich set of geometric operations, giving the advantage that many signal and image processing operations become straightforward and the algorithms intuitive to design. The use of GA allows images to be represented with the three R, G, B color channels defined as a single entity, rather than separate quantities. A novel custom ASIC is proposed and fabricated that directly targets GA operations and results in significant performance improvement for color edge detection. Use of the hardware described in this paper also shows that the convolution operation with the rotor masks within GA belongs to a class of linear vector filters and can be applied to image or speech signals. The contribution of the proposed approach has been demonstrated by implementing three different types of edge detection schemes on the proposed hardware. The overall performance gains using the proposed GA Co-Processor over existing software approaches are more than 3.2× faster than GAIGEN and more than 2800× faster than GABLE. The performance of the fabricated GA co-processor is approximately an order of magnitude faster than previously published results for hardware implementations.

The Influence of the Silicon Component in the Paste for Processor Cooling

Directory of Open Access Journals (Sweden)

Antun Koren

2003-12-01

Full Text Available The development of computer coolers foreseen for the processors keeps step with the processors for PC platform. There are still working and development areas where one could find new technologies and the kinds of the alternative cooling which give better results that the existing classical methods. There are several kinds of alternative cooling, from cooling with the mixture of water and methanol to the usage of freon and liquid nitrogen as the cooling media. The purpose of this work is to point at some new alternative cooling methods and to compare them with the classical ones as well as to stress the problems in classical - mechanically treated cooler and additives of chemically prepared pastes for better heat conductivity from the core surface of the processor.

Supertracker: A Programmable Parallel Pipeline Arithmetic Processor For Auto-Cueing Target Processing

Science.gov (United States)

Mack, Harold; Reddi, S. S.

1980-04-01

Supertracker represents a programmable parallel pipeline computer architecture that has been designed to meet the real time image processing requirements of auto-cueing target data processing. The prototype bread-board currently under development will be designed to perform input video preprocessing and processing for 525-line and 875-line TV formats FLIR video, automatic display gain and contrast control, and automatic target cueing, classification, and tracking. The video preprocessor is capable of performing operations full frames of video data in real time, e.g., frame integration, storage, 3 x 3 convolution, and neighborhood processing. The processor architecture is being implemented using bit-slice microprogrammable arithmetic processors, operating in parallel. Each processor is capable of up to 20 million operations per second. Multiple frame memories are used for additional flexibility.

The associative memory system for the FTK processor at ATLAS

CERN Document Server

Magalotti, D; The ATLAS collaboration; Donati, S; Luciano, P; Piendibene, M; Giannetti, P; Lanza, A; Verzellesi, G; Sakellariou, Andreas; Billereau, W; Combe, J M

2014-01-01

In high energy physics experiments, the most interesting processes are very rare and hidden in an extremely large level of background. As the experiment complexity, accelerator backgrounds, and instantaneous luminosity increase, more effective and accurate data selection techniques are needed. The Fast TracKer processor (FTK) is a real time tracking processor designed for the ATLAS trigger upgrade. The FTK core is the Associative Memory system. It provides massive computing power to minimize the processing time of complex tracking algorithms executed online. This paper reports on the results and performance of a new prototype of Associative Memory system.

Low-Latency Embedded Vision Processor (LLEVS)

Science.gov (United States)

2016-03-01

algorithms, low-latency video processing, embedded image processor, wearable electronics, helmet-mounted systems, alternative night / day imaging...external subsystems and data sources with the device. The establishment of data interfaces in terms of data transfer rates, formats and types are...video signals from Near-visible Infrared (NVIR) sensor, Shortwave IR (SWIR) and Longwave IR (LWIR) is the main processing for Night Vision (NI) system

50 CFR 648.6 - Dealer/processor permits.

Science.gov (United States)

2010-10-01

... of incorporation if the business is a corporation, and a copy of the partnership agreement and the names and addresses of all partners, if the business is a partnership, name of at-sea processor vessel... the fishing year to an applicant, unless the applicant fails to submit a completed application. An...

Event analysis using a massively parallel processor

International Nuclear Information System (INIS)

Bale, A.; Gerelle, E.; Messersmith, J.; Warren, R.; Hoek, J.

1990-01-01

This paper describes a system for performing histogramming of n-tuple data at interactive rates using a commercial SIMD processor array connected to a work-station running the well-known Physics Analysis Workstation software (PAW). Results indicate that an order of magnitude performance improvement over current RISC technology is easily achievable

Lineup composition, suspect position, and the sequential lineup advantage.

Science.gov (United States)

Carlson, Curt A; Gronlund, Scott D; Clark, Steven E

2008-06-01

N. M. Steblay, J. Dysart, S. Fulero, and R. C. L. Lindsay (2001) argued that sequential lineups reduce the likelihood of mistaken eyewitness identification. Experiment 1 replicated the design of R. C. L. Lindsay and G. L. Wells (1985), the first study to show the sequential lineup advantage. However, the innocent suspect was chosen at a lower rate in the simultaneous lineup, and no sequential lineup advantage was found. This led the authors to hypothesize that protection from a sequential lineup might emerge only when an innocent suspect stands out from the other lineup members. In Experiment 2, participants viewed a simultaneous or sequential lineup with either the guilty suspect or 1 of 3 innocent suspects. Lineup fairness was varied to influence the degree to which a suspect stood out. A sequential lineup advantage was found only for the unfair lineups. Additional analyses of suspect position in the sequential lineups showed an increase in the diagnosticity of suspect identifications as the suspect was placed later in the sequential lineup. These results suggest that the sequential lineup advantage is dependent on lineup composition and suspect position. (c) 2008 APA, all rights reserved

Huffman-based code compression techniques for embedded processors

KAUST Repository

Bonny, Mohamed Talal; Henkel, Jö rg

2010-01-01

% for ARM and MIPS, respectively. In our compression technique, we have conducted evaluations using a representative set of applications and we have applied each technique to two major embedded processor architectures, namely ARM and MIPS. © 2010 ACM.

Efficacy of Code Optimization on Cache-Based Processors

Science.gov (United States)

VanderWijngaart, Rob F.; Saphir, William C.; Chancellor, Marisa K. (Technical Monitor)

1997-01-01

In this paper a number of techniques for improving the cache performance of a representative piece of numerical software is presented. Target machines are popular processors from several vendors: MIPS R5000 (SGI Indy), MIPS R8000 (SGI PowerChallenge), MIPS R10000 (SGI Origin), DEC Alpha EV4 + EV5 (Cray T3D & T3E), IBM RS6000 (SP Wide-node), Intel PentiumPro (Ames' Whitney), Sun UltraSparc (NERSC's NOW). The optimizations all attempt to increase the locality of memory accesses. But they meet with rather varied and often counterintuitive success on the different computing platforms. We conclude that it may be genuinely impossible to obtain portable performance on the current generation of cache-based machines. At the least, it appears that the performance of modern commodity processors cannot be described with parameters defining the cache alone.

From TEMPO+ to OPUS 2: what can music tests tell us about processor upgrades?

Science.gov (United States)

van Besouw, R M; Grasmeder, M L

2011-08-01

Tests for quantifying the music perception abilities of cochlear implant users are currently being developed and trialled at the South of England Cochlear Implant Centre. In addition to measures of speech perception, tests of rhythm, and pitch have been administered to MED-EL C40+ implant users before and after upgrading from the TEMPO+ processor with continuous interleaved sampling strategy to the OPUS 2 processor with fine structure processing strategy, with the aims of comparing device performance and evaluating the potential of music perception tests for informing processor upgrades and tuning. Eight experienced adult C40+ implant recipients performed tests of rhythm and pitch discrimination using the TEMPO+ processor and, after a minimum of 6 weeks acclimatization, using the OPUS 2 processor. Stimuli included piano and sine tones in two note ranges for the pitch tasks, and drum beats for the rhythm task. Rhythm, pitch, and speech perception scores were comparable for both processors. An effect of note range was observed (z = -2.52, p = 0.008 (two-tailed), r = -0.63), which indicated that the higher range of notes used for the pitch tasks was easier for participants than the lower range. Measures of pitch discrimination in different frequency ranges further informed changes made to one participant's map, resulting in improved pitch discrimination and speech perception scores. The outcomes of this study demonstrate that music perception tests can provide important additional measures for tuning cochlear implant parameters and assessing the impact of changes to device type and processing strategy.

The hardware implementation of the CERN SPS ultrafast feedback processor demonstrator

CERN Document Server

Dusakto, J E; Fox, J D; Olsen, J; Rivetta, C H; Höfle, W

2013-01-01

An ultrafast 4GSa/s transverse feedback processor has been developed for proof-of-concept studies of feedback control of e-cloud driven and transverse mode coupled intra-bunch instabilities in the CERN SPS. This system consists of a high-speed ADC on the front end and equally fast DAC on the back end. All control and signal processing is implemented in FPGA logic. This system is capable of taking up to 16 sample slices across a single SPS bunch and processing each slice individually within a reconfigurable signal processor. This demonstrator system is a rapidly developed prototype, consisting of both commercial and custom-design components. It can stabilize the motion of a single particle bunch using closed loop feedback. The system can also run open loop as a high-speed arbitrary waveform generator and contains diagnostic features including a special ADC snapshot capture memory. This paper describes the overall system, the feedback processor and focuses on the hardware architecture, design ...

The Digital Algorithm Processors for the ATLAS Level-1 Calorimeter Trigger

CERN Document Server

Silverstein, S

2010-01-01

The ATLAS Level-1 Calorimeter Trigger identifies high-ET jets, electrons/photons and hadrons and measures total and missing transverse energy in proton-proton collisions at the Large Hadron Collider. Two subsystems – the Jet/Energy-sum Processor (JEP) and the Cluster Processor(CP) – process data from every crossing, and report feature multiplicities and energy sums to the ATLAS Central Trigger Processor, which produces a Level-1 Accept decision. Locations and types of identified features are read out to the Level-2 Trigger as regions-of-interest, and quality-monitoring information is read out to the ATLAS data acquisition system. The JEP and CP subsystems share a great deal of common infrastructure, including a custom backplane, several common hardware modules, and readout hardware. Some of the common modules use FPGAs with selectable firmware configurations based on the location in the system. This approach saved substantial development effort and provided a uniform model for software development. We pre...

The Digital Algorithm Processors for the ATLAS Level-1 Calorimeter Trigger

CERN Document Server

Silverstein, S; The ATLAS collaboration

2009-01-01

The ATLAS Level-1 Calorimeter Trigger identifies high-ET jets, electrons/photons and hadrons and measures total and missing transverse energy in proton-proton collisions at the Large Hadron Collider. Two subsystems – the Jet/Energy-sum Processor (JEP) and the Cluster Processor(CP) – process data from every crossing, and report feature multiplicities and energy sums to the ATLAS Central Trigger Processor, which produces a Level-1 Accept decision. Locations and types of identified features are read out to the Level-2 Trigger as regions-of-interest, and quality-monitoring information is read out to the ATLAS data acquisition system. The JEP and CP subsystems share a great deal of common infrastructure, including a custom backplane, several common hardware modules, and readout hardware. Some of the common modules use FPGAs with selectable firmware configurations based on the location in the system. This approach saved substantial development effort and provided a uniform model for software development. We pre...

Methanol fuel processor and PEM fuel cell modeling for mobile application

Energy Technology Data Exchange (ETDEWEB)

Chrenko, Daniela [ISAT, University of Burgundy, Rue Mlle Bourgoise, 58000 Nevers (France); Gao, Fei; Blunier, Benjamin; Bouquain, David; Miraoui, Abdellatif [Transport and Systems Laboratory (SeT) - EA 3317/UTBM, Fuel cell Laboratory (FCLAB), University of Technology of Belfort-Montbeliard, Rue Thierry Mieg 90010, Belfort Cedex (France)

2010-07-15

The use of hydrocarbon fed fuel cell systems including a fuel processor can be an entry market for this emerging technology avoiding the problem of hydrogen infrastructure. This article presents a 1 kW low temperature PEM fuel cell system with fuel processor, the system is fueled by a mixture of methanol and water that is converted into hydrogen rich gas using a steam reformer. A complete system model including a fluidic fuel processor model containing evaporation, steam reformer, hydrogen filter, combustion, as well as a multi-domain fuel cell model is introduced. Experiments are performed with an IDATECH FCS1200 trademark fuel cell system. The results of modeling and experimentation show good results, namely with regard to fuel cell current and voltage as well as hydrogen production and pressure. The system is auto sufficient and shows an efficiency of 25.12%. The presented work is a step towards a complete system model, needed to develop a well adapted system control assuring optimized system efficiency. (author)

Study of an analog/logic processor for the design of an auto patch hybrid computer

International Nuclear Information System (INIS)

Koched, Hassen

1976-01-01

This paper presents the experimental study of an analog multiprocessor designed at SES/CEN-Saclay. An application of such a device as a basic component of an auto-patch hybrid computer is presented. First, the description of the processor, and a presentation of the theoretical concepts which governed the design of the processor are given. Experiments on an hybrid computer are then presented. Finally, different systems of automatic patching are presented, and conveniently modified, for the use of such a processor. (author) [fr

SAPIENS: Spreading Activation Processor for Information Encoded in Network Structures. Technical Report No. 296.

Science.gov (United States)

Ortony, Andrew; Radin, Dean I.

The product of researchers' efforts to develop a computer processor which distinguishes between relevant and irrelevant information in the database, Spreading Activation Processor for Information Encoded in Network Structures (SAPIENS) exhibits (1) context sensitivity, (2) efficiency, (3) decreasing activation over time, (4) summation of…

Feasibility analysis of real-time physical modeling using WaveCore processor technology on FPGA

NARCIS (Netherlands)

Verstraelen, Martinus Johannes Wilhelmina; Pfeifle, Florian; Bader, Rolf

2015-01-01

WaveCore is a scalable many-core processor technology. This technology is specifically developed and optimized for real-time acoustical modeling applications. The programmable WaveCore soft-core processor is silicon-technology independent and hence can be targeted to ASIC or FPGA technologies. The

Tradable permit allocations and sequential choice

Energy Technology Data Exchange (ETDEWEB)

MacKenzie, Ian A. [Centre for Economic Research, ETH Zuerich, Zurichbergstrasse 18, 8092 Zuerich (Switzerland)

2011-01-15

This paper investigates initial allocation choices in an international tradable pollution permit market. For two sovereign governments, we compare allocation choices that are either simultaneously or sequentially announced. We show sequential allocation announcements result in higher (lower) aggregate emissions when announcements are strategic substitutes (complements). Whether allocation announcements are strategic substitutes or complements depends on the relationship between the follower's damage function and governments' abatement costs. When the marginal damage function is relatively steep (flat), allocation announcements are strategic substitutes (complements). For quadratic abatement costs and damages, sequential announcements provide a higher level of aggregate emissions. (author)

Assessment of directionality performances: comparison between Freedom and CP810 sound processors.

Science.gov (United States)

Razza, Sergio; Albanese, Greta; Ermoli, Lucilla; Zaccone, Monica; Cristofari, Eliana

2013-10-01

To compare speech recognition in noise for the Nucleus Freedom and CP810 sound processors using different directional settings among those available in the SmartSound portfolio. Single-subject, repeated measures study. Tertiary care referral center. Thirty-one monoaurally and binaurally implanted subjects (24 children and 7 adults) were enrolled. They were all experienced Nucleus Freedom sound processor users and achieved a 100% open set word recognition score in quiet listening conditions. Each patient was fitted with the Freedom and the CP810 processor. The program setting incorporated Adaptive Dynamic Range Optimization (ADRO) and adopted the directional algorithm BEAM (both devices) and ZOOM (only on CP810). Speech reception threshold (SRT) was assessed in a free-field layout, with disyllabic word list and interfering multilevel babble noise in the 3 different pre-processing configurations. On average, CP810 improved significantly patients' SRTs as compared to Freedom SP after 1 hour of use. Instead, no significant difference was observed in patients' SRT between the BEAM and the ZOOM algorithm fitted in the CP810 processor. The results suggest that hardware developments achieved in the design of CP810 allow an immediate and relevant directional advantage as compared to the previous-generation Freedom device.

Applying the minimax principle to sequential mastery testing

NARCIS (Netherlands)

Vos, Hendrik J.

2002-01-01

The purpose of this paper is to derive optimal rules for sequential mastery tests. In a sequential mastery test, the decision is to classify a subject as a master, a nonmaster, or to continue sampling and administering another random item. The framework of minimax sequential decision theory (minimum

In-Network Adaptation of Video Streams Using Network Processors

Directory of Open Access Journals (Sweden)

Mohammad Shorfuzzaman

2009-01-01

problem can be addressed, near the network edge, by applying dynamic, in-network adaptation (e.g., transcoding of video streams to meet available connection bandwidth, machine characteristics, and client preferences. In this paper, we extrapolate from earlier work of Shorfuzzaman et al. 2006 in which we implemented and assessed an MPEG-1 transcoding system on the Intel IXP1200 network processor to consider the feasibility of in-network transcoding for other video formats and network processor architectures. The use of “on-the-fly” video adaptation near the edge of the network offers the promise of simpler support for a wide range of end devices with different display, and so forth, characteristics that can be used in different types of environments.

Optical chirp z-transform processor with a simplified architecture.

Science.gov (United States)

Ngo, Nam Quoc

2014-12-29

Using a simplified chirp z-transform (CZT) algorithm based on the discrete-time convolution method, this paper presents the synthesis of a simplified architecture of a reconfigurable optical chirp z-transform (OCZT) processor based on the silica-based planar lightwave circuit (PLC) technology. In the simplified architecture of the reconfigurable OCZT, the required number of optical components is small and there are no waveguide crossings which make fabrication easy. The design of a novel type of optical discrete Fourier transform (ODFT) processor as a special case of the synthesized OCZT is then presented to demonstrate its effectiveness. The designed ODFT can be potentially used as an optical demultiplexer at the receiver of an optical fiber orthogonal frequency division multiplexing (OFDM) transmission system.

Computations on the massively parallel processor at the Goddard Space Flight Center

Science.gov (United States)

Strong, James P.

1991-01-01

Described are four significant algorithms implemented on the massively parallel processor (MPP) at the Goddard Space Flight Center. Two are in the area of image analysis. Of the other two, one is a mathematical simulation experiment and the other deals with the efficient transfer of data between distantly separated processors in the MPP array. The first algorithm presented is the automatic determination of elevations from stereo pairs. The second algorithm solves mathematical logistic equations capable of producing both ordered and chaotic (or random) solutions. This work can potentially lead to the simulation of artificial life processes. The third algorithm is the automatic segmentation of images into reasonable regions based on some similarity criterion, while the fourth is an implementation of a bitonic sort of data which significantly overcomes the nearest neighbor interconnection constraints on the MPP for transferring data between distant processors.

Classical and sequential limit analysis revisited

Science.gov (United States)

Leblond, Jean-Baptiste; Kondo, Djimédo; Morin, Léo; Remmal, Almahdi

2018-04-01

Classical limit analysis applies to ideal plastic materials, and within a linearized geometrical framework implying small displacements and strains. Sequential limit analysis was proposed as a heuristic extension to materials exhibiting strain hardening, and within a fully general geometrical framework involving large displacements and strains. The purpose of this paper is to study and clearly state the precise conditions permitting such an extension. This is done by comparing the evolution equations of the full elastic-plastic problem, the equations of classical limit analysis, and those of sequential limit analysis. The main conclusion is that, whereas classical limit analysis applies to materials exhibiting elasticity - in the absence of hardening and within a linearized geometrical framework -, sequential limit analysis, to be applicable, strictly prohibits the presence of elasticity - although it tolerates strain hardening and large displacements and strains. For a given mechanical situation, the relevance of sequential limit analysis therefore essentially depends upon the importance of the elastic-plastic coupling in the specific case considered.

Power estimation on functional level for programmable processors

Directory of Open Access Journals (Sweden)

M. Schneider

2004-01-01

Full Text Available In diesem Beitrag werden verschiedene Ansätze zur Verlustleistungsschätzung von programmierbaren Prozessoren vorgestellt und bezüglich ihrer Übertragbarkeit auf moderne Prozessor-Architekturen wie beispielsweise Very Long Instruction Word (VLIW-Architekturen bewertet. Besonderes Augenmerk liegt hierbei auf dem Konzept der sogenannten Functional-Level Power Analysis (FLPA. Dieser Ansatz basiert auf der Einteilung der Prozessor-Architektur in funktionale Blöcke wie beispielsweise Processing-Unit, Clock-Netzwerk, interner Speicher und andere. Die Verlustleistungsaufnahme dieser Bl¨ocke wird parameterabhängig durch arithmetische Modellfunktionen beschrieben. Durch automatisierte Analyse von Assemblercodes des zu schätzenden Systems mittels eines Parsers können die Eingangsparameter wie beispielsweise der erzielte Parallelitätsgrad oder die Art des Speicherzugriffs gewonnen werden. Dieser Ansatz wird am Beispiel zweier moderner digitaler Signalprozessoren durch eine Vielzahl von Basis-Algorithmen der digitalen Signalverarbeitung evaluiert. Die ermittelten Schätzwerte für die einzelnen Algorithmen werden dabei mit physikalisch gemessenen Werten verglichen. Es ergibt sich ein sehr kleiner maximaler Schätzfehler von 3%. In this contribution different approaches for power estimation for programmable processors are presented and evaluated concerning their capability to be applied to modern digital signal processor architectures like e.g. Very Long InstructionWord (VLIW -architectures. Special emphasis will be laid on the concept of so-called Functional-Level Power Analysis (FLPA. This approach is based on the separation of the processor architecture into functional blocks like e.g. processing unit, clock network, internal memory and others. The power consumption of these blocks is described by parameter dependent arithmetic model functions. By application of a parser based automized analysis of assembler codes of the systems to be estimated

Power estimation on functional level for programmable processors

Science.gov (United States)

Schneider, M.; Blume, H.; Noll, T. G.

2004-05-01

In diesem Beitrag werden verschiedene Ansätze zur Verlustleistungsschätzung von programmierbaren Prozessoren vorgestellt und bezüglich ihrer Übertragbarkeit auf moderne Prozessor-Architekturen wie beispielsweise Very Long Instruction Word (VLIW)-Architekturen bewertet. Besonderes Augenmerk liegt hierbei auf dem Konzept der sogenannten Functional-Level Power Analysis (FLPA). Dieser Ansatz basiert auf der Einteilung der Prozessor-Architektur in funktionale Blöcke wie beispielsweise Processing-Unit, Clock-Netzwerk, interner Speicher und andere. Die Verlustleistungsaufnahme dieser Bl¨ocke wird parameterabhängig durch arithmetische Modellfunktionen beschrieben. Durch automatisierte Analyse von Assemblercodes des zu schätzenden Systems mittels eines Parsers können die Eingangsparameter wie beispielsweise der erzielte Parallelitätsgrad oder die Art des Speicherzugriffs gewonnen werden. Dieser Ansatz wird am Beispiel zweier moderner digitaler Signalprozessoren durch eine Vielzahl von Basis-Algorithmen der digitalen Signalverarbeitung evaluiert. Die ermittelten Schätzwerte für die einzelnen Algorithmen werden dabei mit physikalisch gemessenen Werten verglichen. Es ergibt sich ein sehr kleiner maximaler Schätzfehler von 3%. In this contribution different approaches for power estimation for programmable processors are presented and evaluated concerning their capability to be applied to modern digital signal processor architectures like e.g. Very Long InstructionWord (VLIW) -architectures. Special emphasis will be laid on the concept of so-called Functional-Level Power Analysis (FLPA). This approach is based on the separation of the processor architecture into functional blocks like e.g. processing unit, clock network, internal memory and others. The power consumption of these blocks is described by parameter dependent arithmetic model functions. By application of a parser based automized analysis of assembler codes of the systems to be estimated the input

Study on the management of the Boohung X-Dol 90 developer and fixing solution for automatic X-ray film processor

International Nuclear Information System (INIS)

Hyan, Yong Sil; Kim, Heung Tae; Kwon, Dal Gwan; Choi, Myung Joon; Cheung, Hwan

1986-01-01

Recently, Demands of Automatic X-ray film Processors are increasing more and more at University Hospitals and general Hospitals and Private clinics, but various troubles because of incorrect control were found out. Authors have researched to find out the function and Activity of Automatic X-ray film processor for 2 weeks Kodak RPX-OMAT Processor and Sakura GX3000 Processor and Doosan parka 2000 Processor and results obtained were as follows: 1. Automatic X-ray film processor have an advantage to conduct the rapid treatment of X-ray film processing but incorrect handling of developing and fixing agents were brought about a great change in Contrast and Optical density of X-ray film pictures. 2. About 300 X-ray film could be finished by same developing and fixing solution without exchanging any other solutions in each Automatic X-ray film processor

Reconfigurable VLIW Processor for Software Defined Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We will design and formally verify a VLIW processor that is radiation-hardened, and where the VLIW instructions consist of predicated RISC instructions from the...

Vector and parallel processors in computational science

International Nuclear Information System (INIS)

Duff, I.S.; Reid, J.K.

1985-01-01

This book presents the papers given at a conference which reviewed the new developments in parallel and vector processing. Topics considered at the conference included hardware (array processors, supercomputers), programming languages, software aids, numerical methods (e.g., Monte Carlo algorithms, iterative methods, finite elements, optimization), and applications (e.g., neutron transport theory, meteorology, image processing)

Simultaneous versus sequential penetrating keratoplasty and cataract surgery.

Science.gov (United States)

Hayashi, Ken; Hayashi, Hideyuki

2006-10-01

To compare the surgical outcomes of simultaneous penetrating keratoplasty and cataract surgery with those of sequential surgery. Thirty-nine eyes of 39 patients scheduled for simultaneous keratoplasty and cataract surgery and 23 eyes of 23 patients scheduled for sequential keratoplasty and secondary phacoemulsification surgery were recruited. Refractive error, regular and irregular corneal astigmatism determined by Fourier analysis, and endothelial cell loss were studied at 1 week and 3, 6, and 12 months after combined surgery in the simultaneous surgery group or after subsequent phacoemulsification surgery in the sequential surgery group. At 3 and more months after surgery, mean refractive error was significantly greater in the simultaneous surgery group than in the sequential surgery group, although no difference was seen at 1 week. The refractive error at 12 months was within 2 D of that targeted in 15 eyes (39%) in the simultaneous surgery group and within 2 D in 16 eyes (70%) in the sequential surgery group; the incidence was significantly greater in the sequential group (P = 0.0344). The regular and irregular astigmatism was not significantly different between the groups at 3 and more months after surgery. No significant difference was also found in the percentage of endothelial cell loss between the groups. Although corneal astigmatism and endothelial cell loss were not different, refractive error from target refraction was greater after simultaneous keratoplasty and cataract surgery than after sequential surgery, indicating a better outcome after sequential surgery than after simultaneous surgery.

Global warming policy: A coherent-sequential approach

International Nuclear Information System (INIS)

Manicke, R.L.

1996-01-01

This paper addresses these two closely related themes: (1) the need for structuring and evaluating global climate policy sequentially and (2) the need to incorporate the analysis of real options which may contribute significantly to global climate policy. This paper is organized into four sections. The first section deals with benefit-cost analysis and capital budgeting as they are generally practiced and discusses the reasons why the traditional benefit-cost formulation is inadequate. The second section then discusses the case of one financial option, namely, the European Call Option and discusses some important results. The third section of the paper addresses some of the important results or principles derived in the literature on real options, and while most of the mathematics is not easily transferred nor relevant to the global climate policy, there are many principles that can be applied. In the fourth section the author discusses the implications of a real option environment for the policy process

The impact of reneging in processor sharing queues

NARCIS (Netherlands)

Gromoll, H.C.; Robert, Ph.; Zwart, B.; Bakker, R.F.

2006-01-01

We investigate an overloaded processor sharing queue with renewal arrivals and generally distributed service times. Impatient customers may abandon the queue, or renege, before completing service. The random time representing a customer’s patience has a general distribution and may be dependent on

Color sensor and neural processor on one chip

Science.gov (United States)

Fiesler, Emile; Campbell, Shannon R.; Kempem, Lother; Duong, Tuan A.

1998-10-01

Low-cost, compact, and robust color sensor that can operate in real-time under various environmental conditions can benefit many applications, including quality control, chemical sensing, food production, medical diagnostics, energy conservation, monitoring of hazardous waste, and recycling. Unfortunately, existing color sensor are either bulky and expensive or do not provide the required speed and accuracy. In this publication we describe the design of an accurate real-time color classification sensor, together with preprocessing and a subsequent neural network processor integrated on a single complementary metal oxide semiconductor (CMOS) integrated circuit. This one-chip sensor and information processor will be low in cost, robust, and mass-producible using standard commercial CMOS processes. The performance of the chip and the feasibility of its manufacturing is proven through computer simulations based on CMOS hardware parameters. Comparisons with competing methodologies show a significantly higher performance for our device.

Nested dissection on a mesh-connected processor array

International Nuclear Information System (INIS)

Worley, P.H.; Schreiber, R.

1986-01-01

The authors present a parallel implementation of Gaussian elimination without pivoting using the nested dissection ordering for solving Ax=b where A is an N x N symmetric positive definite matrix. If the graph of A is a √N x √N finite element mesh then a parallel complexity of O(√N) can be achieved for Gaussian elimination with the nested dissection ordering. The authors' implementation achieves this parallel complexity on a two dimensional MIMD processor array with N processors and nearest neighbors interconnections. Thus nested dissection is a near optimal algorithm for this problem on this interconnection topology. The parallel implementation on this architecture requires 158√N + O(log/sub 2/(√N)) parallel floating point multiplications. It is faster than a Kung-Leiserson systolic array for banded matrices for N≥961, and faster than a serial implementation for N as small as 9

Matrix preconditioning: a robust operation for optical linear algebra processors.

Science.gov (United States)

Ghosh, A; Paparao, P

1987-07-15

Analog electrooptical processors are best suited for applications demanding high computational throughput with tolerance for inaccuracies. Matrix preconditioning is one such application. Matrix preconditioning is a preprocessing step for reducing the condition number of a matrix and is used extensively with gradient algorithms for increasing the rate of convergence and improving the accuracy of the solution. In this paper, we describe a simple parallel algorithm for matrix preconditioning, which can be implemented efficiently on a pipelined optical linear algebra processor. From the results of our numerical experiments we show that the efficacy of the preconditioning algorithm is affected very little by the errors of the optical system.

Upgrade of the PreProcessor System for the ATLAS Level-1 Calorimeter Trigger

CERN Document Server

Khomich, A

2010-01-01

The ATLAS Level-1 Calorimeter Trigger is a hardware-based pipelined system designed to identify high-pT objects in the ATLAS calorimeters within a fixed latency of 2.5\\,us. It consists of three subsystems: the PreProcessor which conditions and digitizes analogue signals and two digital processors. The majority of the PreProcessor's tasks are performed on a dense Multi-Chip Module(MCM) consisting of FADCs, a time-adjustment and digital processing ASICs, and LVDS serialisers designed and implemented in ten years old technologies. An MCM substitute, based on today's components (dual channel FADCs and FPGA), is being developed to profit from state-of-the-art electronics and to enhance the flexibility of the digital processing. Development and first test results are presented.

Upgrade of the PreProcessor System for the ATLAS LVL1 Calorimeter Trigger

CERN Document Server

Khomich, A; The ATLAS collaboration

2010-01-01

The ATLAS Level-1 Calorimeter Trigger is a hardware-based pipelined system designed to identify high-pT objects in the ATLAS calorimeters within a fixed latency of 2.5us. It consists of three subsystems: the PreProcessor which conditions and digitizes analogue signals and two digital processors. The majority of the PreProcessor's tasks are performed on a dense Multi-Chip Module(MCM) consisting of FADCs, a time-adjustment and digital processing ASICs, and LVDS serializers designed and implemented in ten years old technologies. An MCM substitute, based on today's components (dual channel FADCs and FPGA), is being developed to profit from state-of-the-art electronics and to enhance the flexibility of the digital processing. Development and first test results are presented.

Embedded SoPC Design with Nios II Processor and Verilog Examples

CERN Document Server

Chu, Pong P

2012-01-01

Explores the unique hardware programmability of FPGA-based embedded systems, using a learn-by-doing approach to introduce the concepts and techniques for embedded SoPC design with Verilog An SoPC (system on a programmable chip) integrates a processor, memory modules, I/O peripherals, and custom hardware accelerators into a single FPGA (field-programmable gate array) device. In addition to the customized software, customized hardware can be developed and incorporated into the embedded system as well-allowing us to configure the soft-core processor, create tailored I/O interfaces, and develop s

Formulation of consumables management models: Mission planning processor payload interface definition

Science.gov (United States)

Torian, J. G.

1977-01-01

Consumables models required for the mission planning and scheduling function are formulated. The relation of the models to prelaunch, onboard, ground support, and postmission functions for the space transportation systems is established. Analytical models consisting of an orbiter planning processor with consumables data base is developed. A method of recognizing potential constraint violations in both the planning and flight operations functions, and a flight data file storage/retrieval of information over an extended period which interfaces with a flight operations processor for monitoring of the actual flights is presented.

Parallel performance and accuracy of lattice Boltzmann and traditional finite difference methods for solving the unsteady two-dimensional Burger's equation

Science.gov (United States)

Velivelli, A. C.; Bryden, K. M.

2006-03-01

Lattice Boltzmann methods are gaining recognition in the field of computational fluid dynamics due to their computational efficiency. In order to quantify the computational efficiency and accuracy of the lattice Boltzmann method, it is compared with efficient traditional finite difference methods such as the alternating direction implicit scheme. The lattice Boltzmann algorithm implemented in previous studies does not approach peak performance for simulations where the data involved in computation per time step is more than the cache size. Due to this, data is obtained from the main memory and this access is much slower than access to cache memory. Using a cache-optimized lattice Boltzmann algorithm, this paper takes into account the full computational strength of the lattice Boltzmann method. The com parison is performed on both a single processor and multiple processors.

A fast inner product processor based on equal alignments

Energy Technology Data Exchange (ETDEWEB)

Smith, S.P.; Torng, H.C.

1985-11-01

Inner product computation is an important operation, invoked repeatedly in matrix multiplications. A high-speed inner product processor can be very useful (among many possible applications) in real-time signal processing. This paper presents the design of a fast inner product processor, with appreciably reduced latency and cost. The inner product processor is implemented with a tree of carry-propagate or carry-save adders; this structure is obtained with the incorporation of three innovations in the conventional multiply/add tree: The leaf-multipliers are expanded into adder subtrees, thus achieving an O(log Nb) latency, where N denotes the number of elements in a vector and b the number of bits in each element. The partial products, to be summed in producing an inner product, are reordered according to their ''minimum alignments.'' This reordering brings approximately a 20% savings in hardware-including adders and data paths. The reduction in adder widths also yields savings in carry propagation time for carry-propagate adders. For trees implemented with carry-save adders, the partial product reordering also serves to truncate the carry propagation chain in the final propagation stage by 2 log b - 1 positions, thus significantly reducing the latency further. A form of the Baugh and Wooley algorithm is adopted to implement two's complement notation with changes only in peripheral hardware.

Trial Sequential Methods for Meta-Analysis

Science.gov (United States)

Kulinskaya, Elena; Wood, John

2014-01-01

Statistical methods for sequential meta-analysis have applications also for the design of new trials. Existing methods are based on group sequential methods developed for single trials and start with the calculation of a required information size. This works satisfactorily within the framework of fixed effects meta-analysis, but conceptual…

A post-processor for the PEST code

International Nuclear Information System (INIS)

Priesche, S.; Manickam, J.; Johnson, J.L.

1992-01-01

A new post-processor has been developed for use with output from the PEST tokamak stability code. It allows us to use quantities calculated by PEST and take better advantage of the physical picture of the plasma instability which they can provide. This will improve comparison with experimentally measured quantities as well as facilitate understanding of theoretical studies

Sequentially pulsed traveling wave accelerator

Science.gov (United States)

Caporaso, George J [Livermore, CA; Nelson, Scott D [Patterson, CA; Poole, Brian R [Tracy, CA

2009-08-18

A sequentially pulsed traveling wave compact accelerator having two or more pulse forming lines each with a switch for producing a short acceleration pulse along a short length of a beam tube, and a trigger mechanism for sequentially triggering the switches so that a traveling axial electric field is produced along the beam tube in synchronism with an axially traversing pulsed beam of charged particles to serially impart energy to the particle beam.

2009 Survey of Gulf of Mexico Dockside Seafood Processors

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This survey gathered and analyze economic data from seafood processors throughout the states in the Gulf region. The survey sought to collect financial variables...

The Operational Semantics of a Java Secure Processor

NARCIS (Netherlands)

Hartel, Pieter H.; Butler, M.J.; Levy, M.; Alves-Foss, J.

1999-01-01

A formal specification of a Java Secure Processor is presented, which is mechanically checked for type consistency, well formedness and operational conservativity. The specification is executable and it is used to animate and study the behaviour of sample Java programs. The purpose of the semantics

Sojourn times in finite-capacity processor-sharing queues

NARCIS (Netherlands)

Borst, S.C.; Boxma, O.J.; Hegde, N.

2005-01-01

Motivated by the need to develop simple parsimonious models for evaluating the performance of wireless data systems, we consider finite-capacity processor-sharing systems. For such systems, we analyze the sojourn time distribution, which presents a useful measure for the transfer delay of documents

Software and DVFS Tuning for Performance and Energy-Efficiency on Intel KNL Processors

Directory of Open Access Journals (Sweden)

Enrico Calore

2018-06-01

Full Text Available Energy consumption of processors and memories is quickly becoming a limiting factor in the deployment of large computing systems. For this reason, it is important to understand the energy performance of these processors and to study strategies allowing their use in the most efficient way. In this work, we focus on the computing and energy performance of the Knights Landing Xeon Phi, the latest Intel many-core architecture processor for HPC applications. We consider the 64-core Xeon Phi 7230 and profile its performance and energy efficiency using both its on-chip MCDRAM and the off-chip DDR4 memory as the main storage for application data. As a benchmark application, we use a lattice Boltzmann code heavily optimized for this architecture and implemented using several different arrangements of the application data in memory (data-layouts, in short. We also assess the dependence of energy consumption on data-layouts, memory configurations (DDR4 or MCDRAM and the number of threads per core. We finally consider possible trade-offs between computing performance and energy efficiency, tuning the clock frequency of the processor using the Dynamic Voltage and Frequency Scaling (DVFS technique.

Vector Array Processor software development. Final report, September 1, 1978-October 14, 1979

International Nuclear Information System (INIS)

Drummond, W.E.

1979-10-01

During the performance period of this contract, from September 1, 1978, to October 14, 1979 (including an extension from April 30, 1979, to October 14, 1979), Austin Research Associates developed and debugged for assembly errors a complete library of utility programs for a Vector Array Processor. The Vector Array Processor is a modified AP-120B array processor having four large serial memories with data paths to the arithmetic pipelines. This hardware arrangement allows the array processor to operate with a speed of 12 million floating point operations per second for many classes of calculations with internal data flow rates up to 30 million words per second. The configuration of the data paths is under program control, and a general setup subroutine was written. The utility subroutines are available to the user through simple Fortran call statements from the host. Anticipated completion of hardware modifications is in the spring of 1980, and then the machine will be available to the Department of Energy for evaluation of the utilities. The option of future development of a compiler for exploitation of the utility library by a high-level language was explored. 9 figures, 7 tables

Nuclear Instrumentation Module (NIM) standard logic processor as a portal signal analyzer

International Nuclear Information System (INIS)

Minges, G.P.

1978-01-01

A general purpose electronic logic processor has been designed into a 2 wide NIM (Nuclear Instrumentation Module) bin module. The unit utilizes a microprocessor to achieve necessary versatility. The processor's first use is as a new generation signal analyzer for use in radiometric personnel and vehicle portal monitors. Significant improvements have been obtained in sensitivity and stability over existing analog discriminators. The new analyzer is presently being used to update personnel and vehicle portal monitoring systems

Real-time simulation of MHD/steam power plants by digital parallel processors

International Nuclear Information System (INIS)

Johnson, R.M.; Rudberg, D.A.

1981-01-01

Attention is given to a large FORTRAN coded program which simulates the dynamic response of the MHD/steam plant on either a SEL 32/55 or VAX 11/780 computer. The code realizes a detailed first-principle model of the plant. Quite recently, in addition to the VAX 11/780, an AD-10 has been installed for usage as a real-time simulation facility. The parallel processor AD-10 is capable of simulating the MHD/steam plant at several times real-time rates. This is desirable in order to develop rapidly a large data base of varied plant operating conditions. The combined-cycle MHD/steam plant model is discussed, taking into account a number of disadvantages. The disadvantages can be overcome with the aid of an array processor used as an adjunct to the unit processor. The conversion of some computations for real-time simulation is considered

Debugging in a multi-processor environment

International Nuclear Information System (INIS)

Spann, J.M.

1981-01-01

The Supervisory Control and Diagnostic System (SCDS) for the Mirror Fusion Test Facility (MFTF) consists of nine 32-bit minicomputers arranged in a tightly coupled distributed computer system utilizing a share memory as the data exchange medium. Debugging of more than one program in the multi-processor environment is a difficult process. This paper describes what new tools were developed and how the testing of software is performed in the SCDS for the MFTF project

The processor farm for online triggering and full event reconstruction of the HERA-B experiment at HERA

International Nuclear Information System (INIS)

Gellrich, A.; Dippel, R.; Gensch, U.; Kowallik, R.; Legrand, I.C.; Leich, H.; Sun, F.; Wegner, P.

1996-01-01

The main goal of the HERA-B experiment which start taking data in 1988 is to study CP violation in B decays. This article describes the concept and the planned implementation of a multi-processor system, called processor farm,as the last part of the data acquisition and trigger system of the HERA B experiment. The third level trigger task and a full online event reconstruction will be performed on this processor farm, consisting of more then 100 powerful RISC processors which are based on commercial hardware boards. The controlling will be done by a real-time operating system which provides a software development environment, including FORTRAN and C compilers. (author)

Bridging the clinician/researcher gap with systemic research: the case for process research, dyadic, and sequential analysis.

Science.gov (United States)

Oka, Megan; Whiting, Jason

2013-01-01

In Marriage and Family Therapy (MFT), as in many clinical disciplines, concern surfaces about the clinician/researcher gap. This gap includes a lack of accessible, practical research for clinicians. MFT clinical research often borrows from the medical tradition of randomized control trials, which typically use linear methods, or follow procedures distanced from "real-world" therapy. We review traditional research methods and their use in MFT and propose increased use of methods that are more systemic in nature and more applicable to MFTs: process research, dyadic data analysis, and sequential analysis. We will review current research employing these methods, as well as suggestions and directions for further research. © 2013 American Association for Marriage and Family Therapy.

Fast Optimal Replica Placement with Exhaustive Search Using Dynamically Reconfigurable Processor

Directory of Open Access Journals (Sweden)

Hidetoshi Takeshita

2011-01-01

Full Text Available This paper proposes a new replica placement algorithm that expands the exhaustive search limit with reasonable calculation time. It combines a new type of parallel data-flow processor with an architecture tuned for fast calculation. The replica placement problem is to find a replica-server set satisfying service constraints in a content delivery network (CDN. It is derived from the set cover problem which is known to be NP-hard. It is impractical to use exhaustive search to obtain optimal replica placement in large-scale networks, because calculation time increases with the number of combinations. To reduce calculation time, heuristic algorithms have been proposed, but it is known that no heuristic algorithm is assured of finding the optimal solution. The proposed algorithm suits parallel processing and pipeline execution and is implemented on DAPDNA-2, a dynamically reconfigurable processor. Experiments show that the proposed algorithm expands the exhaustive search limit by the factor of 18.8 compared to the conventional algorithm search limit running on a Neumann-type processor.

LASIP-III, a generalized processor for standard interface files

International Nuclear Information System (INIS)

Bosler, G.E.; O'Dell, R.D.; Resnik, W.M.

1976-03-01

The LASIP-III code was developed for processing Version III standard interface data files which have been specified by the Committee on Computer Code Coordination. This processor performs two distinct tasks, namely, transforming free-field format, BCD data into well-defined binary files and providing for printing and punching data in the binary files. While LASIP-III is exported as a complete free-standing code package, techniques are described for easily separating the processor into two modules, viz., one for creating the binary files and one for printing the files. The two modules can be separated into free-standing codes or they can be incorporated into other codes. Also, the LASIP-III code can be easily expanded for processing additional files, and procedures are described for such an expansion. 2 figures, 8 tables

The optimization of H.264/AVC baseline decoder on low-cost TriMedia DSP processor

Science.gov (United States)

Wang, Sung-Wen; Yang, Ya-Ting; Li, Chia-Ying; Tung, Yi-Shin; Wu, Ja-Ling

2004-11-01

The emerging video coding standard, H.264/AVC, exhibits the unprecedented coding performance. Comparing to traditional coders, e.g., MPEG-2 and MEPG-4 ASP, about half bitrate saving is shown in the official verification test. Such outstanding performance makes it become the video compression candidate for the upcoming HD-DVD. As a side effect, it was also blamed that H.264/AVC is much more logically complex and requires more computation power than any of the existing standards. A low-cost and efficient implementation of the international standard hence plays an important role of its success. In this paper, we realize an H.264/AVC baseline decoder by a low-cost DSP processor, i.e., Philips" TriMedia TM-1300, and illustrate that less computation demand for H.264/AVC decoding becomes feasible by using effective software core. To this end, we first consider different approaches and take advantage of SIMD instruction set to optimize critical time-consuming coding modules, such as the fractional motion compensation, spatial prediction and inverse transform. Next, we also present some other optimization approaches for entropy decoding and in-loop deblocking filtering, even though they cannot get benefits from utilizing SIMD. In our experiments, by exploiting appropriate instruction level parallelism and efficient algorithms, the decoding speed can be improved by a factor of 8~10; a CIF video sequence can be decoded at up to 19.74~28.97 fps on a 166-MHz TriMedia TM-1300 processor compared to 2.40~2.98 fps by the standard reference software.

Assessing potential forest and steel inter-industry residue utilisation by sequential chemical extraction

Energy Technology Data Exchange (ETDEWEB)

Makela, M.

2012-10-15

Traditional process industries in Finland and abroad are facing an emerging waste disposal problem due recent regulatory development which has increased the costs of landfill disposal and difficulty in acquiring new sites. For large manufacturers, such as the forest and ferrous metals industries, symbiotic cooperation of formerly separate industrial sectors could enable the utilisation waste-labeled residues in manufacturing novel residue-derived materials suitable for replacing commercial virgin alternatives. Such efforts would allow transforming the current linear resource use and disposal models to more cyclical ones and thus attain savings in valuable materials and energy resources. The work described in this thesis was aimed at utilising forest and carbon steel industry residues in the experimental manufacture of novel residue-derived materials technically and environmentally suitable for amending agricultural or forest soil properties. Single and sequential chemical extractions were used to compare the pseudo-total concentrations of trace elements in the manufactured amendment samples to relevant Finnish statutory limit values for the use of fertilizer products and to assess respective potential availability under natural conditions. In addition, the quality of analytical work and the suitability of sequential extraction in the analysis of an industrial solid sample were respectively evaluated through the analysis of a certified reference material and by X-ray diffraction of parallel sequential extraction residues. According to the acquired data, the incorporation of both forest and steel industry residues, such as fly ashes, lime wastes, green liquor dregs, sludges and slags, led to amendment liming capacities (34.9-38.3%, Ca equiv., d.w.) comparable to relevant commercial alternatives. Only the first experimental samples showed increased concentrations of pseudo-total cadmium and chromium, of which the latter was specified as the trivalent Cr(III). Based on

An Efficient System Based On Closed Sequential Patterns for Web Recommendations

OpenAIRE

Utpala Niranjan; R.B.V. Subramanyam; V-Khana

2010-01-01

Sequential pattern mining, since its introduction has received considerable attention among the researchers with broad applications. The sequential pattern algorithms generally face problems when mining long sequential patterns or while using very low support threshold. One possible solution of such problems is by mining the closed sequential patterns, which is a condensed representation of sequential patterns. Recently, several researchers have utilized the sequential pattern discovery for d...

Word Processors: A Look at Four Popular Programs.

Science.gov (United States)

Press, Larry

1980-01-01

Described are types of programs used for processing text (editors, print formatters, and word processors), followed by the comparison of four word-processing packages: Auto Scribe, Electric Pencil, Magic Want and Word Star. With the exception of Auto Scribe, all programs reviewed are CP/M versions. (KC)

Analytic processor model for fast design-space exploration

NARCIS (Netherlands)

Jongerius, R.; Mariani, G.; Anghel, A.; Dittmann, G.; Vermij, E.; Corporaal, H.

2015-01-01

In this paper, we propose an analytic model that takes as inputs a) a parametric microarchitecture-independent characterization of the target workload, and b) a hardware configuration of the core and the memory hierarchy, and returns as output an estimation of processor-core performance. To validate

QERx- A Faster than Real-Time Emulator for Space Processors

Science.gov (United States)

Carvalho, B.; Pidgeon, A.; Robinson, P.

2012-08-01

Developing software for space systems is challenging. Especially because, in order to be sure it can cope with the harshness of the environment and the imperative requirements and constrains imposed by the platform were it will run, it needs to be tested exhaustively. Software Validation Facilities (SVF) are known to the industry and developers, and provide the means to run the On-Board Software (OBSW) in a realistic environment, allowing the development team to debug and test the software.But the challenge is to be able to keep up with the performance of the new processors (LEON2 and LEON3), which need to be emulated within the SVF. Such processor emulators are also used in Operational Simulators, used to support mission preparation and train mission operators. These simulators mimic the satellite and its behaviour, as realistically as possible. For test/operational efficiency reasons and because they will need to interact with external systems, both these uses cases require the processor emulators to provide real-time, or faster, performance.It is known to the industry that the performance of previously available emulators is not enough to cope with the performance of the new processors available in the market. SciSys approached this problem with dynamic translation technology trying to keep costs down by avoiding a hardware solution and keeping the integration flexibility of full software emulation.SciSys presented “QERx: A High Performance Emulator for Software Validation and Simulations” [1], in a previous DASIA event. Since then that idea has evolved and QERx has been successfully validated. SciSys is now presenting QERx as a product that can be tailored to fit different emulation needs. This paper will present QERx latest developments and current status.

Programming massively parallel processors a hands-on approach

CERN Document Server

Kirk, David B

2010-01-01

Programming Massively Parallel Processors discusses basic concepts about parallel programming and GPU architecture. ""Massively parallel"" refers to the use of a large number of processors to perform a set of computations in a coordinated parallel way. The book details various techniques for constructing parallel programs. It also discusses the development process, performance level, floating-point format, parallel patterns, and dynamic parallelism. The book serves as a teaching guide where parallel programming is the main topic of the course. It builds on the basics of C programming for CUDA, a parallel programming environment that is supported on NVI- DIA GPUs. Composed of 12 chapters, the book begins with basic information about the GPU as a parallel computer source. It also explains the main concepts of CUDA, data parallelism, and the importance of memory access efficiency using CUDA. The target audience of the book is graduate and undergraduate students from all science and engineering disciplines who ...

Fast algorithms for coordinate processors in Galois field for multiplicity t = 4.5 and t > 5

International Nuclear Information System (INIS)

Nikityuk, N.M.

1989-01-01

Fast algorithms for solving the coordinate equations for special-purpose processors at multiplicity t = 4.5 and t > 5 are described. Block diagrams of coordinate processor for t 4 in Galois field GF(2 m ) is presented which is solved by a table method. Economical algorithms for solving the coordinate equations by serial methods at t > 5 are described. The algorithms and devices proposed could be applied when creating fast processors in high energy physics spectrometers. 9 refs.; 3 figs

Multicentre evaluation of the Naída CI Q70 sound processor: feedback from cochlear implant users and professionals

Directory of Open Access Journals (Sweden)

Jeanette Martin

2016-12-01

Full Text Available The aim of this survey was to gather data from both implant recipients and professionals on the ease of use of the Naída CI Q70 (Naída CI sound processor from Advanced Bionics and on the usefulness of the new functions and features available. A secondary objective was to investigate fitting practices with the new processor. A comprehensive user satisfaction survey was conducted in a total of 186 subjects from 24 centres. In parallel, 23 professional questionnaires were collected from 11 centres. Overall, there was high satisfaction with the Naída CI processor from adults, children, experienced and new CI users as well as from professionals. The Naída CI processor was shown as being easy to use by all ages of recipients and by professionals. The majority of experienced CI users rated the Naída CI processor as being similar or better than their previous processor in all areas surveyed. The Naída CI was recommended by the professionals for fitting in all populations. Features like UltraZoom, ZoomControl and DuoPhone would not be fitted to very young children in contrast to adults. Positive ratings were obtained for ease of use, comfort and usefulness of the new functions and features of the Naída CI sound processor. Seventy-seven percent of the experienced CI users rated the new processor as being better than their previous sound processor from a general point of view. The survey also showed that fitting practices were influenced by the age of the user.

Development of an Advanced Digital Reactor Protection System Using Diverse Dual Processors to Prevent Common-Mode Failure

International Nuclear Information System (INIS)

Shin, Hyun Kook; Nam, Sang Ku; Sohn, Se Do; Chang, Hoon Seon

2003-01-01

The advanced digital reactor protection system (ADRPS) with diverse dual processors has been developed to prevent common-mode failure (CMF). The principle of diversity is applied to both hardware design and software design. For hardware diversity, two different types of CPUs are used for the bistable processor and local coincidence logic (LCL) processor. The Versa Module Eurocard-based single board computers are used for the CPU hardware platforms. The QNX operating system and the VxWorks operating system were selected for software diversity. Functional diversity is also applied to the input and output modules, and to the algorithm in the bistable processors and LCL processors. The characteristics of the newly developed digital protection system are described together with the preventive capability against CMF. Also, system reliability analysis is discussed. The evaluation results show that the ADRPS has a good preventive capability against the CMF and is a highly reliable reactor protection system

Quality assurance through constancy control for X-ray film processors

International Nuclear Information System (INIS)

Weberling, R.

1982-01-01

A control method to check the reproduction of X-ray film processors and necessary instruments is presented. The application of a light sensitometer allows the production of test films daily, independent of X-ray exposures, X-ray film cassettes and X-ray intensifying screens. The optical densities on the test films will be read by means of a densitometer and the results are plotted on a special control chart. A limitation through optical densities of +-0,15 for Speed Index and +-0,20 for Contrast Index determines the tolerance variation for X-ray film processors. Targets of this control method are uniform image quality, dose reduction and saving of cost. (orig.) [de

Network Coding on Heterogeneous Multi-Core Processors for Wireless Sensor Networks

Science.gov (United States)

Kim, Deokho; Park, Karam; Ro, Won W.

2011-01-01

While network coding is well known for its efficiency and usefulness in wireless sensor networks, the excessive costs associated with decoding computation and complexity still hinder its adoption into practical use. On the other hand, high-performance microprocessors with heterogeneous multi-cores would be used as processing nodes of the wireless sensor networks in the near future. To this end, this paper introduces an efficient network coding algorithm developed for the heterogenous multi-core processors. The proposed idea is fully tested on one of the currently available heterogeneous multi-core processors referred to as the Cell Broadband Engine. PMID:22164053

Adaptation of a Fault-Tolerant Fpga-Based Launch Sequencer as a Cubesat Payload Processor

Science.gov (United States)

2014-06-01

32–bit, reduced instruction set computing ( RISC ) processor that interfaces with a universal asynchronous receiver/transmitter (UART) for a field...test a fault–tolerant reduced instruction set computer processor running a subset of the multiprocessor without interlocked pipelined stages instruction...James H. Newman Thesis Co-Advisor Clark Robertson Chair, Department of Electrical and Computer Engineering iv THIS PAGE

Breaking from binaries - using a sequential mixed methods design.

Science.gov (United States)

Larkin, Patricia Mary; Begley, Cecily Marion; Devane, Declan

2014-03-01

To outline the traditional worldviews of healthcare research and discuss the benefits and challenges of using mixed methods approaches in contributing to the development of nursing and midwifery knowledge. There has been much debate about the contribution of mixed methods research to nursing and midwifery knowledge in recent years. A sequential exploratory design is used as an exemplar of a mixed methods approach. The study discussed used a combination of focus-group interviews and a quantitative instrument to obtain a fuller understanding of women's experiences of childbirth. In the mixed methods study example, qualitative data were analysed using thematic analysis and quantitative data using regression analysis. Polarised debates about the veracity, philosophical integrity and motivation for conducting mixed methods research have largely abated. A mixed methods approach can contribute to a deeper, more contextual understanding of a variety of subjects and experiences; as a result, it furthers knowledge that can be used in clinical practice. The purpose of the research study should be the main instigator when choosing from an array of mixed methods research designs. Mixed methods research offers a variety of models that can augment investigative capabilities and provide richer data than can a discrete method alone. This paper offers an example of an exploratory, sequential approach to investigating women's childbirth experiences. A clear framework for the conduct and integration of the different phases of the mixed methods research process is provided. This approach can be used by practitioners and policy makers to improve practice.

Design and implementation of a high performance network security processor

Science.gov (United States)

Wang, Haixin; Bai, Guoqiang; Chen, Hongyi

2010-03-01

The last few years have seen many significant progresses in the field of application-specific processors. One example is network security processors (NSPs) that perform various cryptographic operations specified by network security protocols and help to offload the computation intensive burdens from network processors (NPs). This article presents a high performance NSP system architecture implementation intended for both internet protocol security (IPSec) and secure socket layer (SSL) protocol acceleration, which are widely employed in virtual private network (VPN) and e-commerce applications. The efficient dual one-way pipelined data transfer skeleton and optimised integration scheme of the heterogenous parallel crypto engine arrays lead to a Gbps rate NSP, which is programmable with domain specific descriptor-based instructions. The descriptor-based control flow fragments large data packets and distributes them to the crypto engine arrays, which fully utilises the parallel computation resources and improves the overall system data throughput. A prototyping platform for this NSP design is implemented with a Xilinx XC3S5000 based FPGA chip set. Results show that the design gives a peak throughput for the IPSec ESP tunnel mode of 2.85 Gbps with over 2100 full SSL handshakes per second at a clock rate of 95 MHz.

Design and development of a diesel and JP-8 logistic fuel processor

Science.gov (United States)

Roychoudhury, Subir; Lyubovsky, Maxim; Walsh, D.; Chu, Deryn; Kallio, Erik

The paper describes the design and performance of a breadboard prototype for a 5 kW fuel-processor for powering a solid oxide fuel cell (SOFC) stack. The system was based on a small, modular catalytic Microlith auto-thermal (ATR) reactor with the versatility of operating on diesel, Jet-A or JP-8 fuels. The reforming reactor utilized Microlith substrates and catalyst technology (patented and trademarked). These reactors have demonstrated the capability of efficiently reforming liquid and gaseous hydrocarbon fuels at exceptionally high power densities. The performance characteristics of the auto-thermal reactor (ATR) have been presented along with durability data. The fuel processor integrates fuel preparation, steam generation, sulfur removal, pumps, blowers and controls. The system design was developed via ASPEN ® Engineering Suite process simulation software and was analyzed with reference to system balance requirements. Since the fuel processor has not been integrated with a fuel cell, aspects of thermal integration with the stack have not been specifically addressed.

Detailed algorithmic description of a processor: a recipe for ...

African Journals Online (AJOL)

International Journal of Natural and Applied Sciences ... a simple developed compiler could generate the code of a simple programming language. ... It should be noted that such code generation must be done on a particular processor- for ...

The hardware track finder processor in CMS at CERN

International Nuclear Information System (INIS)

Kluge, A.

1997-07-01

The work covers the design of the Track Finder Processor in the high energy experiment CMS at CERN/Geneva. The task of this processor is to identify muons and to measure their transverse momentum. The Track Finder makes it possible to determine the physical relevance of each high energetic collision and to forward only interesting data to the data analysis units. Data of more than two hundred thousand detector cells are used to determine the location of muons and to measure their transverse momentum. Each 25 ns a new data set is generated. Measurement of location and transverse momentum of the muons can be terminated within 350 ns by using an ASIC. The classical method in high energy physics experiments is to employ a pattern comparison method. The predefined patterns are compared to the found patterns. The high number of data channels and the complex requirements to the spatial detector resolution do not permit to employ a pattern comparison method. A so called track following algorithm was designed, which is able to assemble complete tracks through the whole detector starting from single track segments. Instead of storing a high number of track patterns the problem is brought back to the algorithm level. Comprehensive simulations, employing the hardware simulation language VHDL, were conducted in order to optimize the algorithm and its hardware implementation. A FPGA (field program able gate array)-prototype was designed. A feasibility study to implement the track finder processor employing ASICs was conducted. (author)

Dual-scale topology optoelectronic processor.

Science.gov (United States)

Marsden, G C; Krishnamoorthy, A V; Esener, S C; Lee, S H

1991-12-15

The dual-scale topology optoelectronic processor (D-STOP) is a parallel optoelectronic architecture for matrix algebraic processing. The architecture can be used for matrix-vector multiplication and two types of vector outer product. The computations are performed electronically, which allows multiplication and summation concepts in linear algebra to be generalized to various nonlinear or symbolic operations. This generalization permits the application of D-STOP to many computational problems. The architecture uses a minimum number of optical transmitters, which thereby reduces fabrication requirements while maintaining area-efficient electronics. The necessary optical interconnections are space invariant, minimizing space-bandwidth requirements.