WorldWideScience

Sample records for traditional design methods

  1. Comparison of Traditional Design Nonlinear Programming Optimization and Stochastic Methods for Structural Design

    Science.gov (United States)

    Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

    2010-01-01

    Structural design generated by traditional method, optimization method and the stochastic design concept are compared. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions were produced by all the three methods. The variation in the weight calculated by the methods was modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliabilitytraced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

  2. Deficiency of the Space Syntax method as an urban design tool in designing traditional urban space and the need for some supplementary methods

    Directory of Open Access Journals (Sweden)

    Hossein Bahrainy

    2015-12-01

    Full Text Available Urban design problems have become so complex that no single designer is able to consider all aspects of a design area simultaneously. Lately the application of computerized and scientific methods have helped designers analyze complex problems. One of these new methods is Space Syntax. The purpose of this study is to first investigate the strengths and weaknesses of this method and then suggest some supplementary methods to cover its pitfalls. On the next phase Space Syntax and supplementary methods will be used to design a pedestrian pathway in the Imamzade Ghasem neighborhood as a traditional context. Space Syntax will identify the existing spatial structure and direct future changes toward its strengthening. The case study reveals that Space Syntax can be successfully used in analysis of traditional spaces, but in order to successfully design a neighborhood in such a complex context, it involves logistical shortcomings which could be eliminated through supplementary methods.

  3. A Survey of a System of Methods for Fire Safety Design of Traditional Concrete Constructions

    DEFF Research Database (Denmark)

    Hertz, Kristian

    2000-01-01

    constructions DS411. And the bases for many of the methods have been distributed by CIB W14 reports. But a survey of all the methods in coherence has never been presented, and much of this documentation and the additional documentation produced for the work with the codes needs still to be printed in papers......During the years since 1978 the author has been developing a series of calculation methods and sup-porting test methods for the fire safety design of concrete constructions. The basic methods have been adopted in the fire chapters of the Eurocode ENV1992-1-2 and the Danish code for concrete.......It is the aim of this paper to give a coherent presentation of the design methods, their degree of documentation and the available references in order to facilitate the application of them....

  4. [Method of traditional Chinese medicine formula design based on 3D-database pharmacophore search and patent retrieval].

    Science.gov (United States)

    He, Yu-su; Sun, Zhi-yi; Zhang, Yan-ling

    2014-11-01

    By using the pharmacophore model of mineralocorticoid receptor antagonists as a starting point, the experiment stud- ies the method of traditional Chinese medicine formula design for anti-hypertensive. Pharmacophore models were generated by 3D-QSAR pharmacophore (Hypogen) program of the DS3.5, based on the training set composed of 33 mineralocorticoid receptor antagonists. The best pharmacophore model consisted of two Hydrogen-bond acceptors, three Hydrophobic and four excluded volumes. Its correlation coefficient of training set and test set, N, and CAI value were 0.9534, 0.6748, 2.878, and 1.119. According to the database screening, 1700 active compounds from 86 source plant were obtained. Because of lacking of available anti-hypertensive medi cation strategy in traditional theory, this article takes advantage of patent retrieval in world traditional medicine patent database, in order to design drug formula. Finally, two formulae was obtained for antihypertensive.

  5. Re-Defining Traditional Bazaar Areas and Shade Structures Via Parametric Design Methods

    Directory of Open Access Journals (Sweden)

    Ahmet Emre Dinçer

    2017-12-01

    Full Text Available For the continuation of life, people created various equipment and goods. To create mutual benefits, they’ve exchanged the overpruduced items with different products. This has begun the shopping act. By the increased amount of transactions, a need of defined area for shopping have arisen.  For a temporary time, trading areas have been developed at different locations at a certain period. In the course of time, beside trading, these areas served as socio-cultural spaces where the human relations were established. Moreover, demand of being able to immediately access to needed goods have emerged. This situation made having a permanent trading area essential. Therefore, enclosed and permanent trade areas from bazaar, inn, bedesten, arasta to shopping malls have emerged. Next to all these trading areas, traditional bazaar areas keep being established. Nowadays, there is a need of providing some determined comfort conditions to the users for these street alley bazaars. Decreasing the effect of unfavorable weather conditions and providing supportive certain services and units (like WCs, security, cleanliness, etc. are some of them. As a fundamental solution, without disengaging the user relations with the outside, shade structures are generally provided. Shade structures can support cleaning and similar jobs by gathering and using rainwater besides its purpose of protecting the user from bad weather conditions. Application examples of these systems are gradually increasing. However, it is necessary to develop new approaches, in order to stop these proposed shade structures, become prototypes and to adapt the proposal to its environment and to increase diversity. In this study, a convenient shade structure and its alternatives, which are adapted to environmental conditions, were designed to create a sample model for other bazaar areas. In models, basically, folding design approaches were pursued. For production of these shade structure models

  6. Teaching design in the first years of a traditional mechanical engineering degree: methods, issues and future perspectives

    Science.gov (United States)

    Silva, Arlindo; Fontul, Mihail; Henriques, Elsa

    2015-01-01

    Engineering design is known as an answer to an ill-defined problem. As any answer to an ill-defined problem, it can never be completely right or absolutely wrong. The methods that universities use to teach engineering design, as a consequence of this, suffer from the same fate. However, the accumulated experience with the 'chalk and talk' teaching tradition has led to a reality in which the employers of fresh graduates are not happy with the engineers they are getting. Part of their complaints are related with the inability of recently graduate engineers to work in problems where the boundaries are not well defined, are interdisciplinary, require the use of effective communication and integrate non-technical issues. These skills are mostly absent from traditional engineering curricula. This paper demonstrates the implementation of engineering design perspectives enhancing some of the aforementioned skills in a traditional mechanical engineering curriculum. It emphasises in particular a design project that is tackled in a sequence of conventional courses with a focus that depends on the course objectives and disciplinary domain. This transdisciplinary design project conveys the idea (and effectively implements it concurrently) that design is multidisciplinary.

  7. A large volume striped bass egg incubation chamber: design and comparison with a traditional method

    Science.gov (United States)

    Harper, C.J.

    2009-01-01

    I conducted a comparative study of a new jar design (experimental chamber) with a standard egg incubation vessel (McDonald jar). Experimental chambers measured 0.4 m in diameter by 1.3 m in height and had a volume of 200 L. McDonald hatching jars measured 16 cm in diameter by 45 cm in height and had a volume of 6 L. Post-hatch survival was estimated at 48, 96 and 144 h. Stocking rates resulted in an average egg density of 21.9 eggs ml-1 (range = 21.6 – 22.1) for McDonald jars and 10.9 eggs ml-1 (range = 7.0 – 16.8) for experimental chambers. I was unable to detect an effect of container type on survival to 48, 96 or 144 h. At 144 h striped bass fry survival averaged 37.3% for McDonald jars and 34.2% for experimental chambers. Survival among replicates was significantly different. Survival of striped bass significantly decreased between 96 and 144 h. Mean survival among replicates ranged from 12.4 to 57.3%. I was unable to detect an effect of initial stocking density on survival. Experimental jars allow for incubation of a larger number of eggs in a much smaller space. As hatchery production is often limited by space or water supply, experimental chambers offer an alternative to extending spawning activities, thereby reducing manpower and cost. However, the increase in the number of eggs per rearing container does increase the risk associated with catastrophic loss of a production unit. I conclude the experimental chamber is suitable for striped bass egg incubation.

  8. A comparison of a 3 dimensional probabilistic method of berthing structure design and the traditional method of a berthing structure design

    NARCIS (Netherlands)

    Kool, J.J.; De Gijt, J.G.; Groenewegen, L.

    2013-01-01

    Finite element method (FEM) is increasingly applied as a first choice tool for designing structures. The same trend is seen in probabilistic designing. Consequently, the application of the combination of these two methods is discussed in this paper.In this study the presence of potential

  9. Teaching Design in the First Years of a Traditional Mechanical Engineering Degree: Methods, Issues and Future Perspectives

    Science.gov (United States)

    Silva, Arlindo; Fontul, Mihail; Henriques, Elsa

    2015-01-01

    Engineering design is known as an answer to an ill-defined problem. As any answer to an ill-defined problem, it can never be completely right or absolutely wrong. The methods that universities use to teach engineering design, as a consequence of this, suffer from the same fate. However, the accumulated experience with the "chalk and…

  10. Green Building between Tradition and Modernity Study Comparative Analysis between Conventional Methods and Updated Styles of Design and Architecture Processors

    Directory of Open Access Journals (Sweden)

    H Elshimy

    2017-03-01

    Full Text Available Green house   concept appeared from the ancient to the modern age ages and there is a tendency to use a traditional architecture with a pristine ecological environment areas and through sophisticated systems arrived to modern systems of the upgraded systems by Treatment architectural achieve environmental   sustainability   in   recent   years,   sustainability concept has become the common interest of numerous disciplines. The reason for this popularity is to perform the sustainable development. The Concept of Green Architecture, also known as "sustainable architecture” or “green house,” is the theory, science and style of buildings designed and constructed in accordance   with environmentally   friendly   principles.   Green house strives to minimize the number of resources consumed in the   building's  construction,   use   and   operation,   as  well  as curtailing  the  harm  done  to  the  environment  through  the emission, pollution and waste of its components.To design, construct, operate and maintain buildings energy, water and new materials are utilized as well as amounts of waste causing negative effects to health and environment is generated. In order to limit these effects and design environmentally sound and resource efficient buildings; "green building systems" must be introduced, clarified, understood and practiced.This paper aims at highlighting these difficult and complex issues of sustainability which encompass the scope of almost every aspect of human life.

  11. Infusing Qualitative Traditions in Counseling Research Designs

    Science.gov (United States)

    Hays, Danica G.; Wood, Chris

    2011-01-01

    Research traditions serve as a blueprint or guide for a variety of design decisions throughout qualitative inquiry. This article presents 6 qualitative research traditions: grounded theory, phenomenology, consensual qualitative research, ethnography, narratology, and participatory action research. For each tradition, the authors describe its…

  12. Comparing two methods of education (virtual versus traditional) on learning of Iranian dental students: a post-test only design study.

    Science.gov (United States)

    Moazami, Fariborz; Bahrampour, Ehsan; Azar, Mohammad Reza; Jahedi, Farzad; Moattari, Marzieh

    2014-03-05

    The importance of using technologies such as e-learning in different disciplines is discussed in the literature. Researchers have measured the effectiveness of e-learning in a number of fields.Considering the lack of research on the effectiveness of online learning in dental education particularly in Iran, the advantages of these learning methods and the positive university atmosphere regarding the use of online learning. This study, therefore, aims to compare the effects of two methods of teaching (virtual versus traditional) on student learning. This post-test only design study approached 40, fifth year dental students of Shiraz University of Medical Sciences. From this group, 35 students agreed to participate. These students were randomly allocated into two groups, experimental (virtual learning) and comparison (traditional learning). To ensure similarity between groups, we compared GPAs of all participants by the Mann-Whitney U test (P > 0.05). The experimental group received a virtual learning environment courseware package specifically designed for this study, whereas the control group received the same module structured in a traditional lecture form. The virtual learning environment consisted of online and offline materials. Two identical valid, reliable post-tests that consisted of 40 multiple choice questions (MCQs) and 4 essay questions were administered immediately (15 min) after the last session and two months later to assess for knowledge retention. Data were analyzed by SPSS version 20. A comparison of the mean knowledge score of both groups showed that virtual learning was more effective than traditional learning (effect size = 0.69). The newly designed virtual learning package is feasible and will result in more effective learning in comparison with lecture-based training. However further studies are needed to generalize the findings of this study.

  13. Study Of Lampungnese Traditional Home Garden Design

    Science.gov (United States)

    Pratiwi, R. A.; Gunawan

    2017-10-01

    Lampung is one area in Indonesia which has a traditional culture that comes from two groups of descents, they are ulun Lampung Pepadun and ulun Lampung Saibatin. Lampungnese traditional culture has been well-known by Indonesian people for its traditional dances, traditional clothing, or traditional home architecture. However, Lampungnese traditional home garden recently may not yet been described. Information related to Lampungnese traditional home garden is still very limited and it does not yet represented the culture based design concept. This research was directed to identify the elements of the home garden and map it into design concept of the Lampungnese traditional home garden based on information of Lampungnese traditional culture. The study was conducted by using descriptive approach through literature review, interviews and cultural exploration, as well as field observation. The study was able to identify the elements forming the Lampungnese traditional home garden, namely gakhang hadap, walai, outdoor kitchenette, firewood place, outdoor kitchen, livestock barns, as well as plants. Space layout of the home garden comprises front yard (tengahbah/terambah/beruan), side yard (kebik/kakebik), and backyard (kudan/juyu/kebon). Each element of the garden is located in the right place of the space layout.

  14. Moving beyond Traditional Methods of Survey Validation

    Science.gov (United States)

    Maul, Andrew

    2017-01-01

    In his focus article, "Rethinking Traditional Methods of Survey Validation," published in this issue of "Measurement: Interdisciplinary Research and Perspectives," Andrew Maul wrote that it is commonly believed that self-report, survey-based instruments can be used to measure a wide range of psychological attributes, such as…

  15. Survey Methods, Traditional, Public Opinion Polling

    DEFF Research Database (Denmark)

    Elmelund-Præstekær, Christian; Hopmann, David Nicolas; Pedersen, Rasmus Tue

    2017-01-01

    Traditional public opinion polls are surveys in which a random sample of a given population is asked questions about their attitudes, knowledge, or behavior. If conducted properly, the answers from such surveys are approximately representative of the entire population. Traditional public opinion...... polling is typically based on four different methods of data gathering, or combinations hereof: face-to-face, postal surveys, phone surveys, and web surveys. Given that opinion polls are based on a sample, we cannot be sure that the sample reflects public opinion perfectly, however—even if randomness...... is perfect. Moreover, responses may be highly dependent on the contextual information provided with the question. Also, it may be difficult to capture past or complex causes of attitudes or behavior. In short, surveys are a precise way of measuring public opinion, but they do not come without challenges....

  16. Implementation of Traditional Malay Design Values in Contemporary Malay Houses

    OpenAIRE

    Elham Hosseini; Gurupiah Mursib; Raja Nafida Raja Shahminan

    2016-01-01

    Traditional houses are the most essential architectural experience that is in harmony with the people's culture, beliefs, environment and lifestyles. The development of design values in contemporary architecture by tracking traditional design values in architecture paves the way for arguments concerning the implementation of authentic Malay traditional house design values in contemporary Malay houses. In addition, it is hypothesized that the Malay traditional houses theoretically provide a co...

  17. [Design of traditional Chinese medicines with antihypertensive components based on medicinal property combination modes].

    Science.gov (United States)

    Liao, Su-Fen; Yan, Su-Rong; Guo, Wei-Jia; Luo, Ji; Sun, Jing; Dong, Fang; Wang, Yun; Qiao, Yan-Jiang

    2014-07-01

    Multi-component traditional Chinese medicines are an innovative research mode for traditional Chinese medicines. Currently, there are many design methods for developing multi-component traditional Chinese medicines, but their common feature is the lack of effective connection of the traditional Chinese medicine theory. In this paper, the authors discussed the multi-component traditional Chinese medicine design methods based on medicinal property combination modes, provided the combination methods with the characteristics of traditional Chinese medicine for the prescription combinations, and proved its feasibly with hypertension cases.

  18. Comparing Traditional and Crowdsourcing Methods for Pretesting Survey Questions

    Directory of Open Access Journals (Sweden)

    Jennifer Edgar

    2016-10-01

    Full Text Available Cognitive interviewing is a common method used to evaluate survey questions. This study compares traditional cognitive interviewing methods with crowdsourcing, or “tapping into the collective intelligence of the public to complete a task.” Crowdsourcing may provide researchers with access to a diverse pool of potential participants in a very timely and cost-efficient way. Exploratory work found that crowdsourcing participants, with self-administered data collection, may be a viable alternative, or addition, to traditional pretesting methods. Using three crowdsourcing designs (TryMyUI, Amazon Mechanical Turk, and Facebook, we compared the participant characteristics, costs, and quantity and quality of data with traditional laboratory-based cognitive interviews. Results suggest that crowdsourcing and self-administered protocols may be a viable way to collect survey pretesting information, as participants were able to complete the tasks and provide useful information; however, complex tasks may require the skills of an interviewer to administer unscripted probes.

  19. Creativity Methods in Interaction Design

    DEFF Research Database (Denmark)

    Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

    2010-01-01

    The field of interaction design encompasses a variety of methods for fostering innovation and creativity. In this paper, we present a selection of such methods that scaffold ideation and concept development in the early phases of design. As a conceptual frame for discussing these methods, we...... introduce four aspects that are particularly salient in the field of interaction design: tradition and transcendence, convergence and divergence, degree of structure, and sources of inspiration. We then outline how the methods relate to each of these aspects. The paper contributes to design practitioners...

  20. SUSTAINABLE ARCHITECTURAL DESIGN: REVIVING TRADITIONAL DESIGN AND ADAPTING MODERN SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Ibrahim Mostafa Eldemery

    2010-03-01

    Full Text Available Architecture is the art and science of designing which involves the manipulation of mass, space, volume, texture, light, shadow, materials, program and other elements in order to achieve an end which is aesthetic, functional and sustainable. Sustainability is a growing trend within the field of architecture, it is currently the most pressing, complex and challenging agenda facing architects. The industrialization and modernization of the world has led to increased initiatives regarding sustainability debate, where recently the word ‘sustainable’ entered into the consciousness of architects and became an essential concern in the discourse of architecture. What is more, we are nowadays witnessing the defense of former ways of life that affect not only the architecture, but also the habitat, work, and, in short, what can be called sustainability. Although sustainability at the human settlement scale has received great attention so far in most of the developing countries, it still remains the most glaring challenge in terms of its demand on resources and expertise. The aim today is to bring modern technologies and knowledge representing design solutions as guidelines like double skin façade, adapting traditional concepts, in tune with such practices to develop solutions that provide us with sustainable buildings that interact and are in harmony with natural climatic conditions. The paper will make an attempt at highlighting sustainability challenges we currently face including its implications for the built environment, in order to propose a sustainability evaluation framework, drawing out transferable lessons learned for future development.

  1. Implementation of Traditional Malay Design Values in Contemporary Malay Houses

    Directory of Open Access Journals (Sweden)

    Elham Hosseini

    2016-05-01

    Full Text Available Traditional houses are the most essential architectural experience that is in harmony with the people's culture, beliefs, environment and lifestyles. The development of design values in contemporary architecture by tracking traditional design values in architecture paves the way for arguments concerning the implementation of authentic Malay traditional house design values in contemporary Malay houses. In addition, it is hypothesized that the Malay traditional houses theoretically provide a constructive innovative framework for the design performance of the contemporary Malay house. In this research, data was compiled through field observation and documentary review. The evidence revealed that Malay traditional houses convey a concrete message of richness encompassing architectural design values and theoretical propositions. The credibility of the results was improved and confirmed by a confluence of evidence via a confirmation process. The findings suggested that there is a rich source of subjective support, lending proof to the premise of the research investigation. The research has highlighted the significance of traditional architectural design values towards innovative design in the architecture of contemporary Malay houses as a workable pattern for use in the design of contemporary architecture.

  2. Bioreactor design and implementation strategies for the cultivation of filamentous fungi and the production of fungal metabolites: from traditional methods to engineered systems

    Directory of Open Access Journals (Sweden)

    Musoni, M.

    2015-01-01

    Full Text Available The production of fungal metabolites and conidia at an industrial scale requires an adequate yield at relatively low cost. To this end, many factors are examined and the design of the bioreactor to be used for the selected product takes a predominant place in the analysis. One approach to addressing the issue is to integrate the scaling-up procedure according to the biological characteristics of the microorganism considered, i.e. in our case filamentous fungi. Indeed, the scaling-up procedure is considered as one of the major bottlenecks in fermentation technology, mainly due to the near impossibility of reproducing the ideal conditions obtained in small reactors designed for research purposes when transposing them to a much larger production scale. The present review seeks to make the point regarding the bioreactor design and its implementation for cultivation of filamentous fungi and the production of fungal metabolites according to different developmental stages of fungi of industrial interest. Solid-state (semi-solid, submerged, fermentation and biofilm reactors are analyzed. The different bioreactor designs used for these three processes are also described at the technological level.

  3. CONTEMPORARY USAGE OF TRADITIONAL TURKISH MOTIFS IN PRODUCT DESIGNS

    Directory of Open Access Journals (Sweden)

    Tulay Gumuser

    2012-12-01

    Full Text Available The aim of this study is to identify the traditional Turkish motifs and its relations among present industrial designs. Traditional Turkish motifs played a very important role in 16th century onwards. The arts of the Ottoman Empire were used because of their symbolic meanings and unique styles. When we examine these motifs we encounter; Tiger Stripe, Three Spot (Çintemani, Rumi, Hatayi, Penç, Cloud, Crescent, Star, Crown, Hyacinth, Tulip and Carnation motifs. Nowadays, Turkish designers have begun to use these traditional Turkish motifs in their designs so as to create differences and awareness in the world design. The examples of these industrial designs, using the Turkish motifs, have survived and have Ottoman heritage and historical value. In this study, the Turkish motifs will be examined along with their focus on contemporary Turkish industrial designs used today.

  4. Relevance of traditional methods of conflict resolution in the justice ...

    African Journals Online (AJOL)

    The traditional methods of African conflict resolution have long existed and are deeply rooted in the customs and traditions of the peoples of Africa. These methods are geared towards maintaining harmonious and peaceful coexistence in the community. Colonialism introduced the modern justice system, which dominated ...

  5. Design Methods in Practice

    DEFF Research Database (Denmark)

    Jensen, Torben Elgaard; Andreasen, Mogens Myrup

    2010-01-01

    The paper challenges the dominant and widespread view that a good design method will guarantee a systematic approach as well as certain results. First, it explores the substantial differences between on the one hand the conception of methods implied in Pahl & Beitz’s widely recognized text book...... on engineering design, and on the other hand the understanding of method use, which has emerged from micro-sociological studies of practice (ethnomethodology). Second, it reviews a number of case studies conducted by engineering students, who were instructed to investigate the actual use of design methods...... in Danish companies. The paper concludes that design methods in practice deviate substantially from Pahl & Beitz’s description of method use: The object and problems, which are the starting points for method use, are more contested and less given than generally assumed; The steps of methods are often...

  6. Embodied Design Ideation methods

    DEFF Research Database (Denmark)

    Wilde, Danielle; Vallgårda, Anna; Tomico, Oscar

    2017-01-01

    Embodied design ideation practices work with relationships between body, material and context to enliven design and research potential. Methods are often idiosyncratic and – due to their physical nature – not easily transferred. This presents challenges for designers wishing to develop and share ...

  7. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers....... The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design....

  8. Oil pulling: A traditional method on the edge of evidence

    Directory of Open Access Journals (Sweden)

    H Mythri

    2017-01-01

    Full Text Available Introduction: Oil pulling is an ancient, traditional folk remedy that has been practiced for centuries in India and southern Asia as a holistic Ayurvedic technique. The practice of oil pulling involves placing a tablespoon of an edible oil (e.g. sesame, olive, sunflower, coconut inside the mouth, and swishing or “pulling” the oil through the teeth and oral cavity for anywhere from 1–5 minutes to up to 20 minutes or longer. Materials and Methods: Articles related to oil pulling were collected by using oil pulling as Keyword in Google and Medline. Out of the 21 related articles published till 2016, 6 articles with the proper study designs were used for analysis. Results: The studies were unreliable for many reasons, including the misinterpretation of results due to small sample size and improper study design. Conclusion: Though the promoters claim it as one of the best method to be as adjuvant to mechanical control methods, scientific evidences are lacking.

  9. Reliability studies of diagnostic methods in Indian traditional Ayurveda medicine

    DEFF Research Database (Denmark)

    Kurande, Vrinda Hitendra; Waagepetersen, Rasmus; Toft, Egon

    2013-01-01

    as prakriti classification), method development (pulse diagnosis), quality assurance for diagnosis and treatment and in the conduct of clinical studies. Several reliability studies are conducted in western medicine. The investigation of the reliability of traditional Chinese, Japanese and Sasang medicine...

  10. Traditional methods of social control in Afikpo north local ...

    African Journals Online (AJOL)

    Traditional methods of social control in Afikpo north local government area, Ebonyi state south eastern Nigeria. ... Journal of Religion and Human Relations ... simple percentage was used in presenting and interpreting the quantitative data.

  11. The Finite Elements Method (FEM versus traditional Methods (TM, in the estimation of settlement and modulus of soil reaction for foundation slabs design on soils with natural or man-made cavities

    Directory of Open Access Journals (Sweden)

    Escolano-Sánchez, F.

    2015-03-01

    Full Text Available Direct foundations with continuous elements, such as slabs, provide more advantages than direct foundations with isolated elements, such as footings, and deep foundations, such as piles, in the case of soil with natural or man-made cavities. The slabs are usually designed by two-dimensional models which show their shape on the plant, on a lineal elastic support, represented by a modulus of soil reaction. Regarding the settlement estimation, the following article compares the Finite Elements Method (FEM versus the classical Method (CM to select the modulus of soil reaction used to design foundations slabs in sensitive soils and sites with possible cavities or collapses. This analysis includes one of these cavities in the design to evaluate the risk of fail.Las cimentaciones directas con elementos continuos «losas», tienen ventajas sobre las cimentaciones directas con elementos aislados «zapatas» y sobre las cimentaciones profundas «pilotes», frente a la presencia de terrenos problemáticos. Las losas se diseñan de forma habitual con modelos bidimensionales que representan su forma en planta, apoyada en un medio elástico y lineal, representado por un módulo de balasto. En el presente artículo se realiza un análisis comparativo, para la estimación de asientos, entre el Método de Elementos Finitos (FEM y el Método Clásico (MC, para la elección de los módulos de balasto que se utilizan en el diseño de losas de cimentación en terrenos con blandones y cavidades naturales o antrópicas. Este análisis considera el peligro de la presencia de una de estas cavidades dentro de su diseño, de esta forma, el riesgo de fallo puede ser valorado por ambos métodos.

  12. An assessment of existing common traditional methods of water ...

    African Journals Online (AJOL)

    Classical water purification methods include boiling, filtration, irradiation and the use of chemicals while traditional water purification methods in use are boiling, filtration, sedimentation, long storage and solar radiation. Waterborne diseases are m ore common in the rural communities where potable water supply coverage ...

  13. College Students' Perceptions of the Traditional Lecture Method

    Science.gov (United States)

    Covill, Amy E.

    2011-01-01

    Fifty-one college students responded to survey questions regarding their perceptions of the traditional lecture method of instruction that they received in a 200-level psychology course. At a time when many professors are being encouraged to use active learning methods instead of lectures, it is important to consider the students' perspective. Do…

  14. Comparison of Designer's Design Thinking Modes in Digital and Traditional Sketches

    Science.gov (United States)

    Wu, Jun-Chieh; Chen, Cheng-Chi; Chen, Hsin-Chia

    2012-01-01

    The internal design thinking behaviour of designers in the concept development has been an important issue of cognitive psychology. In this study, the design thinking process designers have in applying digital media and traditional paper in the early concept development stage was explored. Special focus was made on the structure and procedure of…

  15. Tradition

    DEFF Research Database (Denmark)

    Otto, Ton

    2016-01-01

    : beliefs, practices, institutions, and also things. In this sense, the meaning of the term in social research is very close to its usage in common language and is not always theoretically well developed (see Shils, 1971: 123). But the concept of tradition has also been central to major theoretical debates...... on the nature of social change, especially in connection with the notion of modernity. Here tradition is linked to various forms of agency as a factor of both stability and intentional change....

  16. [Application of Delphi method in traditional Chinese medicine clinical research].

    Science.gov (United States)

    Bi, Ying-fei; Mao, Jing-yuan

    2012-03-01

    In recent years, Delphi method has been widely applied in traditional Chinese medicine (TCM) clinical research. This article analyzed the present application situation of Delphi method in TCM clinical research, and discussed some problems presented in the choice of evaluation method, classification of observation indexes and selection of survey items. On the basis of present application of Delphi method, the author analyzed the method on questionnaire making, selection of experts, evaluation of observation indexes and selection of survey items. Furthermore, the author summarized the steps of application of Delphi method in TCM clinical research.

  17. An ergonomic approach for designing indian traditional vegetable cutter.

    Science.gov (United States)

    Dhara, Prakash C; De, Sujaya; Sengupta, Piyali; Maity, Payel; Pal, Amitava

    2015-01-01

    In India varieties of hand tools have been used to cut the vegetables. Traditional vegetable cutter is a commonly used hand tool which has been used for years in the kitchen. The tool may have some design related problems. The present study was undertaken to reduce those problems. The study objective was to evaluate a new design of traditional vegetable cutters for use in the Indian kitchen. One hundred and fifty Indian women who regularly used a vegetable cutter for cooking purposes participated in this study. The design of the vegetable cutter was modified based on the postural preference of the users and other anthropometric factors including the blade angle, length, breadth and width of the sitting area. The prevalence of musculoskeletal disorders was assessed by means of a questionnaire for subjects' feedback. New concepts of the design were proposed and a few prototypes were made and were tested by paired comparison using the EMG system. A large number of subjects (61%) used the vegetable cutter while sitting on the floor with folded knees and the prevalence of MSD in most of the body parts was comparatively lower in this posture than that in squatting posture. In the new design, a broad platform was suggested to provide a more comfortable sitting when a subject sits on it with folded knees. For the vegetable cutter, the blade angle was made at 120° with a broad folded wooden base as the final prototype of the cutter. The length, breadth, and thickness of the base were selected based on the results of the anthropometric measurements among the prototypes of the cutters. The selected vegetable cutter showed the least myoelectric activity among the prototypes during cutting vegetables. The modified vegetable cutter appeared to be ergonomically effective, less prone to muscular stress, and compatible for preferred posture of the users.

  18. Design theory methods and organization for innovation

    CERN Document Server

    Le Masson, Pascal; Hatchuel, Armand

    2017-01-01

    This textbook presents the core of recent advances in design theory and its implications for design methods and design organization. Providing a unified perspective on different design methods and approaches, from the most classic (systematic design) to the most advanced (C-K theory), it offers a unique and integrated presentation of traditional and contemporary theories in the field. Examining the principles of each theory, this guide utilizes numerous real life industrial applications, with clear links to engineering design, industrial design, management, economics, psychology and creativity. Containing a section of exams with detailed answers, it is useful for courses in design theory, engineering design and advanced innovation management. "Students and professors, practitioners and researchers in diverse disciplines, interested in design, will find in this book a rich and vital source for studying fundamental design methods and tools as well as the most advanced design theories that work in practice". Pro...

  19. Non-Deterministic, Non-Traditional Methods (NDNTM)

    Science.gov (United States)

    Cruse, Thomas A.; Chamis, Christos C. (Technical Monitor)

    2001-01-01

    The review effort identified research opportunities related to the use of nondeterministic, nontraditional methods to support aerospace design. The scope of the study was restricted to structural design rather than other areas such as control system design. Thus, the observations and conclusions are limited by that scope. The review identified a number of key results. The results include the potential for NASA/AF collaboration in the area of a design environment for advanced space access vehicles. The following key points set the context and delineate the key results. The Principal Investigator's (PI's) context for this study derived from participation as a Panel Member in the Air Force Scientific Advisory Board (AF/SAB) Summer Study Panel on 'Whither Hypersonics?' A key message from the Summer Study effort was a perceived need for a national program for a space access vehicle whose operating characteristics of cost, availability, deployability, and reliability most closely match the NASA 3rd Generation Reusable Launch Vehicle (RLV). The Panel urged the AF to make a significant joint commitment to such a program just as soon as the AF defined specific requirements for space access consistent with the AF Aerospace Vision 2020. The review brought home a concurrent need for a national vehicle design environment. Engineering design system technology is at a time point from which a revolution as significant as that brought about by the finite element method is possible, this one focusing on information integration on a scale that far surpasses current design environments. The study therefore fully supported the concept, if not some of the details of the Intelligent Synthesis Environment (ISE). It became abundantly clear during this study that the government (AF, NASA) and industry are not moving in the same direction in this regard, in fact each is moving in its own direction. NASA/ISE is not yet in an effective leadership position in this regard. However, NASA does

  20. Bacterial population in traditional sourdough evaluated by molecular methods

    NARCIS (Netherlands)

    Randazzo, C.L.; Heilig, G.H.J.; Restuccia, C.; Giudici, P.; Caggia, C.

    2005-01-01

    Aims: To study the microbial communities in artisanal sourdoughs, manufactured by traditional procedure in different areas of Sicily, and to evaluate the lactic acid bacteria (LAB) population by classical and culture-independent approaches. Methods and Results: Forty-five LAB isolates were

  1. Comparison of traditional physico-chemical methods and molecular ...

    African Journals Online (AJOL)

    This study was aim to review the efficiency of molecular markers and traditional physico-chemical methods for the identification of basmati rice. The study involved 44 promising varieties of Indica rices collected from geographically distant places and adapted to irrigated and aerobic agro-ecosystems. Quality data for ...

  2. Traditional and New methods for the Preparation of Diazocarbonyl Compounds

    Directory of Open Access Journals (Sweden)

    ANTONIO C.B. BURTOLOSO

    2018-04-01

    Full Text Available ABSTRACT For many years diazocarbonyl compounds have been studied due to their versatility and usability in many chemical transformations. In this review, we summarize the traditional methods to prepare these compounds as well as the new methods and recent improvements in experimental procedures. Moreover, emergence of continuous flow techniques has allowed safer and environmentally friendly procedures for the handling of diazomethane and diazo compounds and will also be a topic in this review.

  3. A Declarative Design Approach to Modeling Traditional and Non-Traditional Space Systems

    Science.gov (United States)

    Hoag, Lucy M.

    The space system design process is known to be laborious, complex, and computationally demanding. It is highly multi-disciplinary, involving several interdependent subsystems that must be both highly optimized and reliable due to the high cost of launch. Satellites must also be capable of operating in harsh and unpredictable environments, so integrating high-fidelity analysis is important. To address each of these concerns, a holistic design approach is necessary. However, while the sophistication of space systems has evolved significantly in the last 60 years, improvements in the design process have been comparatively stagnant. Space systems continue to be designed using a procedural, subsystem-by-subsystem approach. This method is inadequate since it generally requires extensive iteration and limited or heuristic-based search, which can be slow, labor-intensive, and inaccurate. The use of a declarative design approach can potentially address these inadequacies. In the declarative programming style, the focus of a problem is placed on what the objective is, and not necessarily how it should be achieved. In the context of design, this entails knowledge expressed as a declaration of statements that are true about the desired artifact instead of explicit instructions on how to implement it. A well-known technique is through constraint-based reasoning, where a design problem is represented as a network of rules and constraints that are reasoned across by a solver to dynamically discover the optimal candidate(s). This enables implicit instantiation of the tradespace and allows for automatic generation of all feasible design candidates. As such, this approach also appears to be well-suited to modeling adaptable space systems, which generally have large tradespaces and possess configurations that are not well-known a priori. This research applied a declarative design approach to holistic satellite design and to tradespace exploration for adaptable space systems. The

  4. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  5. Traditional Islamic cities unveiled: the quest for urban design regularity

    Directory of Open Access Journals (Sweden)

    Jorge Correia

    2015-08-01

    Full Text Available Traditional Islamic cities have generally gathered orientalized gazes and perspectives, picking up from misconceptions and stereotypes that during the second half af the 19th century andwere perpectuated by colonialism. More recent scholarship has shed light on the urban organizationand composition of such tissues; most of them confined to old quarters or historical centres ofthriving contemporary cities within the Arab-Muslim world. In fact, one of the most striking featureshas been the unveiling of layered urban assemblages where exterior agents have somehowlaunched or interrupted an apparent islamicized continuum. Primarly, this paper wishes to search forexternal political factors that have designed regularly geometrized patterns in medium-sized Arabtowns. For that, two case studies from different geographies - Maghreb and the Near East - will bemorphologically analysed through updated urban surveys. Whereas Nablus (Palestine ows the urbanmatrix of its old town to its Roman past, in Azemmour’s medina (Morocco it is still possible to trackthe thin European early-modern colonial stratum. However, both cases show how regularity patternschallenge Western concepts of geometrical design to embrace levels of rationality related to tradionalIslamic urban forms, societal configurations and built environment. Urban morphology becomes afundamental tool for articulating the history with me processes of sedimentation and evolution in orderto read current urban prints and dynamics. Thus, the paper will also interpret alternative logics ofrational urban display in Azemmour and Nablus, linked to ways of living within the Islamic sphere.

  6. Traditions and Alcohol Use: A Mixed-Methods Analysis

    Science.gov (United States)

    Castro, Felipe González; Coe, Kathryn

    2011-01-01

    An integrative mixed-methods analysis examined traditional beliefs as associated with beliefs about self-care during pregnancy and with alcohol abstinence among young adult women from two rural U.S.–Mexico border communities. Quantitative (measured scale) variables and qualitative thematic variables generated from open-ended responses served as within-time predictors of these health-related outcomes. A weaker belief that life is better in big cities was associated with stronger self-care beliefs during pregnancy. Also, a weaker belief that small towns offer tranquil environments was associated with total abstinence from alcohol. Regarding the Hispanic Paradox, these results suggest that a critical appreciation of cultural traditions can be protective, as this avoids stereotypical or idyllic views of urban or rural lifeways, and promotes self-protective beliefs and behaviors. PMID:17967095

  7. [Establishment of design space for production process of traditional Chinese medicine preparation].

    Science.gov (United States)

    Xu, Bing; Shi, Xin-Yuan; Qiao, Yan-Jiang; Wu, Zhi-Sheng; Lin, Zhao-Zhou

    2013-03-01

    The philosophy of quality by design (QbD) is now leading the changes in the drug manufacturing mode from the conventional test-based approach to the science and risk based approach focusing on the detailed research and understanding of the production process. Along with the constant deepening of the understanding of the manufacturing process, the design space will be determined, and the emphasis of quality control will be shifted from the quality standards to the design space. Therefore, the establishment of the design space is core step in the implementation of QbD, and it is of great importance to study the methods for building the design space. This essay proposes the concept of design space for the production process of traditional Chinese medicine (TCM) preparations, gives a systematic introduction of the concept of the design space, analyzes the feasibility and significance to build the design space in the production process of traditional Chinese medicine preparations, and proposes study approaches on the basis of examples that comply with the characteristics of traditional Chinese medicine preparations, as well as future study orientations.

  8. Do new wipe materials outperform traditional lead dust cleaning methods?

    Science.gov (United States)

    Lewis, Roger D; Ong, Kee Hean; Emo, Brett; Kennedy, Jason; Brown, Christopher A; Condoor, Sridhar; Thummalakunta, Laxmi

    2012-01-01

    Government guidelines have traditionally recommended the use of wet mopping, sponging, or vacuuming for removal of lead-contaminated dust from hard surfaces in homes. The emergence of new technologies, such as the electrostatic dry cloth and wet disposable clothes used on mopheads, for removal of dust provides an opportunity to evaluate their ability to remove lead compared with more established methods. The purpose of this study was to determine if relative differences exist between two new and two older methods for removal of lead-contaminated dust (LCD) from three wood surfaces that were characterized by different roughness or texture. Standard leaded dust, coefficient of friction was performed for each wipe material. Analysis of variance was used to evaluate the surface and cleaning methods. There were significant interactions between cleaning method and surface types, p = 0.007. Cleaning method was found be a significant factor in removal of lead, p coefficient of friction, significantly different among the three wipes, is likely to influence the cleaning action. Cleaning method appears to be more important than texture in LCD removal from hard surfaces. There are some small but important factors in cleaning LCD from hard surfaces, including the limits of a Swiffer mop to conform to curved surfaces and the efficiency of the wetted shop towel and vacuuming for cleaning all surface textures. The mean percentage reduction in lead dust achieved by the traditional methods (vacuuming and wet wiping) was greater and more consistent compared to the new methods (electrostatic dry cloth and wet Swiffer mop). Vacuuming and wet wiping achieved lead reductions of 92% ± 4% and 91%, ± 4%, respectively, while the electrostatic dry cloth and wet Swiffer mops achieved lead reductions of only 89 ± 8% and  81 ± 17%, respectively.

  9. The ethics of improving African traditional medical practice: scientific or African traditional research methods?

    Science.gov (United States)

    Nyika, Aceme

    2009-11-01

    The disease burden in Africa, which is relatively very large compared with developed countries, has been attributed to various factors that include poverty, food shortages, inadequate access to health care and unaffordability of Western medicines to the majority of African populations. Although for 'old diseases' knowledge about the right African traditional medicines to treat or cure the diseases has been passed from generation to generation, knowledge about traditional medicines to treat newly emerging diseases has to be generated in one way or another. In addition, the existing traditional medicines have to be continuously improved, which is also the case with Western scientific medicines. Whereas one school of thought supports the idea of improving medicines, be they traditional or Western, through scientific research, an opposing school of thought argues that subjecting African traditional medicines to scientific research would be tantamount to some form of colonization and imperialism. This paper argues that continuing to use African traditional medicines for old and new diseases without making concerted efforts to improve their efficacy and safety is unethical since the disease burden affecting Africa may continue to rise in spite of the availability and accessibility of the traditional medicines. Most importantly, the paper commends efforts being made in some African countries to improve African traditional medicine through a combination of different mechanisms that include the controversial approach of scientific research on traditional medicines.

  10. Bacterial population in traditional sourdough evaluated by molecular methods.

    Science.gov (United States)

    Randazzo, C L; Heilig, H; Restuccia, C; Giudici, P; Caggia, C

    2005-01-01

    To study the microbial communities in artisanal sourdoughs, manufactured by traditional procedure in different areas of Sicily, and to evaluate the lactic acid bacteria (LAB) population by classical and culture-independent approaches. Forty-five LAB isolates were identified both by phenotypic and molecular methods. The restriction fragment length polymorphism and 16S ribosomal DNA gene sequencing gave evidence of a variety of species with the dominance of Lactobacillus sanfranciscensis and Lactobacillus pentosus, in all sourdoughs tested. Culture-independent method, such as denaturing gradient gel electrophoresis (DGGE) of the V6-V8 regions of the 16S rDNA, was applied for microbial community fingerprint. The DGGE profiles revealed the dominance of L. sanfranciscensis species. In addition, Lactobacillus-specific primers were used to amplify the V1-V3 regions of the 16S rDNA. DGGE profiles flourished the dominance of L. sanfranciscensis and Lactobacillus fermentum in the traditional sourdoughs, and revealed that the closely related species Lactobacillus kimchii and Lactobacillus alimentarius were not discriminated. Lactobacillus-specific PCR-DGGE analysis is a rapid tool for rapid detection of Lactobacillus species in artisanal sourdough. This study reports a characterization of Lactobacillus isolates from artisanal sourdoughs and highlights the value of DGGE approach to detect uncultivable Lactobacillus species.

  11. Integrating Virtual Reality (VR) into traditional instructional design ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2015-12-01

    Dec 1, 2015 ... this technology and presented how to integrat VR with traditional instructional ... training has forced organizations to adopt new .... skills in a safe, controlled environment ... phone charger battery pack [B] connected to.

  12. Operational auditing versus traditional method: A comparative investigation

    Directory of Open Access Journals (Sweden)

    Reza Tehrani

    2013-06-01

    Full Text Available Operational auditing is one of the management consultancy services whose significance is on the rise day by day. This approach is, clearly, a systematic and methodical process used to evaluate economic savings of financial processes in organizations and the results of the evaluations are reported to interested people along with some comments to improve operational processes. Accordingly, it appears that the proper employment of the existing rationale in operational auditing can be a significant step towards the improvement of financial efficiency in Iranian public and private banking sector. This paper studies the effects of operational auditing on the improvement of economic saving of financial processes in Iranian private banks compared with traditional approaches where the operations are based on financial statements. The population of this survey includes 15 private and public Iranian banks and the proposed study selects 78 branches, randomly. The Cronbach alpha was used to test the reliability a questionnaire employed to collect the needed data in this study. The results obtained by SPSS Software indicated that the reliability of the instrumentsanged between 0.752 and 0.867, suggesting an acceptable level of the reliability for the questionnaire. Besides, content validity was used to confirm the validity of the instrument. The results of the study indicated that the operational auditing as a useful approach influencing the financial efficiency of public and private banks has significantly transformed the traditional thinking in the field of management auditing. The operational auditing has a number of significant advantages including a better method of controlling financial operations within Iranian banks, efficient planning in the future, facilitating efficient, appropriate, and accurate management decision making, and sound evaluation of managers’ financial operations.

  13. A Composite Model of Wound Segmentation Based on Traditional Methods and Deep Neural Networks

    Directory of Open Access Journals (Sweden)

    Fangzhao Li

    2018-01-01

    Full Text Available Wound segmentation plays an important supporting role in the wound observation and wound healing. Current methods of image segmentation include those based on traditional process of image and those based on deep neural networks. The traditional methods use the artificial image features to complete the task without large amounts of labeled data. Meanwhile, the methods based on deep neural networks can extract the image features effectively without the artificial design, but lots of training data are required. Combined with the advantages of them, this paper presents a composite model of wound segmentation. The model uses the skin with wound detection algorithm we designed in the paper to highlight image features. Then, the preprocessed images are segmented by deep neural networks. And semantic corrections are applied to the segmentation results at last. The model shows a good performance in our experiment.

  14. [Study on dosage form design for improving oral bioavailability of traditional Chinese medicines].

    Science.gov (United States)

    Xia, Hai-Jian; Zhang, Zhen-Hai; Yao, Dong-Dong; Jia, Xiao-Bin

    2013-09-01

    Both chemical drugs and traditional Chinese medicines have the problem of low bioavailability. However, as traditional Chinese medicines are a multi-component complex, their dosage forms are required to be designed in line with their characteristics, in order to improve the bioavailability of traditional Chinese medicines. Traditional Chinese medicines are mostly prepared into pill, powder, paste, elixir and decoction, but with such drawbacks as high administration dose and poor efficacy. With the process of modernization of traditional Chinese medicines, new-type preparations have be developed and made outstanding achievements. However, they fail to make an organic integration between traditional Chinese medicine theories and modern preparation theories. Characteristics of traditional Chinese medicines are required to be taken into account during the development of traditional Chinese medicines. In the article, multi-component preparation technology was adopted to establish a multi-component drug release system of traditional Chinese medicines on the basis of multiple components of traditional Chinese medicines.

  15. Understanding Creativity Methods in Design

    DEFF Research Database (Denmark)

    Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

    2017-01-01

    This paper contributes an analytical framework to improve understanding of the composition of recognized creativity methods used in design. Based on an extensive literature review, our framework synthesizes key concepts from design and particularly creativity research, and is further supported...... by significant experience with creativity methods in design. We propose that nine concepts are relevant for analyzing creativity methods in design: process structure, materials, tools, combination, metaphor, analogy, framing, divergence, and convergence. To test their relevance as components of an analytical...... are composed, how and why they work, and how they potentially may be tweaked or refined for enhanced deployment in design....

  16. Internet-based versus traditional teaching and learning methods.

    Science.gov (United States)

    Guarino, Salvatore; Leopardi, Eleonora; Sorrenti, Salvatore; De Antoni, Enrico; Catania, Antonio; Alagaratnam, Swethan

    2014-10-01

    The rapid and dramatic incursion of the Internet and social networks in everyday life has revolutionised the methods of exchanging data. Web 2.0 represents the evolution of the Internet as we know it. Internet users are no longer passive receivers, and actively participate in the delivery of information. Medical education cannot evade this process. Increasingly, students are using tablets and smartphones to instantly retrieve medical information on the web or are exchanging materials on their Facebook pages. Medical educators cannot ignore this continuing revolution, and therefore the traditional academic schedules and didactic schemes should be questioned. Analysing opinions collected from medical students regarding old and new teaching methods and tools has become mandatory, with a view towards renovating the process of medical education. A cross-sectional online survey was created with Google® docs and administrated to all students of our medical school. Students were asked to express their opinion on their favourite teaching methods, learning tools, Internet websites and Internet delivery devices. Data analysis was performed using spss. The online survey was completed by 368 students. Although textbooks remain a cornerstone for training, students also identified Internet websites, multimedia non-online material, such as the Encyclopaedia on CD-ROM, and other non-online computer resources as being useful. The Internet represented an important aid to support students' learning needs, but textbooks are still their resource of choice. Among the websites noted, Google and Wikipedia significantly surpassed the peer-reviewed medical databases, and access to the Internet was primarily through personal computers in preference to other Internet access devices, such as mobile phones and tablet computers. Increasingly, students are using tablets and smartphones to instantly retrieve medical information. © 2014 John Wiley & Sons Ltd.

  17. The Analysis on the Integration and Embodiment of Traditional Cultural Element in Environmental Artistic Design

    Science.gov (United States)

    Ling, Bao

    2018-03-01

    For this phase of environmental artistic design, the traditional culture element is one very precious design element, but it has difficulty in breaking out of its shell, and that looks too outdated, however, the traditional culture element would be more peculiar if ponderously adding some elements. This paper will further analyse the integration and manifestation of traditional culture element which from the environmental artistic design, it aims to integrate the tradition and modernity perfectly and give the spectators a refreshing and unconventional sense of design.

  18. Methods of Conflict Resolution in African Traditional Society | Ajayi ...

    African Journals Online (AJOL)

    This study examined the patterns or mechanism for conflict resolution in traditional African societies with particular reference to Yoruba and Igbo societies in Nigeria and Pondo tribe in South Africa. The paper notes that conflict resolution in traditional African societies provides opportunity to interact with the parties ...

  19. Islamic geometric patterns their historical development and traditional methods of construction

    CERN Document Server

    Bonner, Jay

    2017-01-01

    The main focus of this unique book is an in-depth examination of the polygonal technique; the primary method used by master artists of the past in creating Islamic geometric patterns. The author details the design methodology responsible for this all-but-lost art form and presents evidence for its use from the historical record, both of which are vital contributions to the understanding of this ornamental tradition. Additionally, the author examines the historical development of Islamic geometric patterns, the significance of geometric design within the broader context of Islamic ornament as a whole, the formative role that geometry plays throughout the Islamic ornamental arts (including calligraphy, the floral idiom, dome decoration, geometric patterns, and more), and the underexamined question of pattern classification. Featuring over 600 beautiful color images, Islamic Geometric Patterns: Their Historical Development and Traditional Methods of Construction is a valuable addition to the literature of Islam...

  20. Affordable Design: A Methodolgy to Implement Process-Based Manufacturing Cost into the Traditional Performance-Focused Multidisciplinary Design Optimization

    Science.gov (United States)

    Bao, Han P.; Samareh, J. A.

    2000-01-01

    The primary objective of this paper is to demonstrate the use of process-based manufacturing and assembly cost models in a traditional performance-focused multidisciplinary design and optimization process. The use of automated cost-performance analysis is an enabling technology that could bring realistic processbased manufacturing and assembly cost into multidisciplinary design and optimization. In this paper, we present a new methodology for incorporating process costing into a standard multidisciplinary design optimization process. Material, manufacturing processes, and assembly processes costs then could be used as the objective function for the optimization method. A case study involving forty-six different configurations of a simple wing is presented, indicating that a design based on performance criteria alone may not necessarily be the most affordable as far as manufacturing and assembly cost is concerned.

  1. A Comparison of Kernel Equating and Traditional Equipercentile Equating Methods and the Parametric Bootstrap Methods for Estimating Standard Errors in Equipercentile Equating

    Science.gov (United States)

    Choi, Sae Il

    2009-01-01

    This study used simulation (a) to compare the kernel equating method to traditional equipercentile equating methods under the equivalent-groups (EG) design and the nonequivalent-groups with anchor test (NEAT) design and (b) to apply the parametric bootstrap method for estimating standard errors of equating. A two-parameter logistic item response…

  2. Algebraic Methods to Design Signals

    Science.gov (United States)

    2015-08-27

    to date on designing signals using algebraic and combinatorial methods. Mathematical tools from algebraic number theory, representation theory and... combinatorial objects in designing signals for communication purposes. Sequences and arrays with desirable autocorrelation properties have many...multiple access methods in mobile radio communication systems. We continue our mathematical framework based on group algebras, character theory

  3. The determinants of traditional medicine use in Northern Tanzania: a mixed-methods study.

    Directory of Open Access Journals (Sweden)

    John W Stanifer

    Full Text Available Traditional medicines are an important part of healthcare in sub-Saharan Africa, and building successful disease treatment programs that are sensitive to traditional medicine practices will require an understanding of their current use and roles, including from a biomedical perspective. Therefore, we conducted a mixed-method study in Northern Tanzania in order to characterize the extent of and reasons for the use of traditional medicines among the general population so that we can better inform public health efforts in the region.Between December 2013 and June 2014 in Kilimanjaro, Tanzania, we conducted 5 focus group discussions and 27 in-depth interviews of key informants. The data from these sessions were analyzed using an inductive framework method with cultural insider-outsider coding. From these results, we developed a structured survey designed to test different aspects of traditional medicine use and administered it to a random sample of 655 adults from the community. The results were triangulated to explore converging and diverging themes.Most structured survey participants (68% reported knowing someone who frequently used traditional medicines, and the majority (56% reported using them themselves in the previous year. The most common uses were for symptomatic ailments (42%, chronic diseases (15%, reproductive problems (11%, and malaria/febrile illnesses (11%. We identified five major determinants for traditional medicine use in Northern Tanzania: biomedical healthcare delivery, credibility of traditional practices, strong cultural identities, individual health status, and disease understanding.In order to better formulate effective local disease management programs that are sensitive to TM practices, we described the determinants of TM use. Additionally, we found TM use to be high in Northern Tanzania and that its use is not limited to lower-income areas or rural settings. After symptomatic ailments, chronic diseases were reported as

  4. Impact of traditional processing methods on some physico chemical ...

    African Journals Online (AJOL)

    AJB SERVER

    2006-10-16

    Oct 16, 2006 ... 1Department of Food Science and Technology, University of ... need to educate traditional processors on good manufacturing practices, .... Table 3. Physical Contaminants in Fermented Cassava flour (“Kpor Umilin”) Samples.

  5. Methods of Conflict Resolution in African Traditional Society

    African Journals Online (AJOL)

    Toshiba

    Department of History and International Studies. Faculty of Arts, Ekiti State ... and market brawls, skirmishes and wars, public insurrections and assaults. ..... treaty making by traditional rulers and leaders of thought led by Igwe. Nzekwesi, for ...

  6. Intravenous catheter training system: computer-based education versus traditional learning methods.

    Science.gov (United States)

    Engum, Scott A; Jeffries, Pamela; Fisher, Lisa

    2003-07-01

    Virtual reality simulators allow trainees to practice techniques without consequences, reduce potential risk associated with training, minimize animal use, and help to develop standards and optimize procedures. Current intravenous (IV) catheter placement training methods utilize plastic arms, however, the lack of variability can diminish the educational stimulus for the student. This study compares the effectiveness of an interactive, multimedia, virtual reality computer IV catheter simulator with a traditional laboratory experience of teaching IV venipuncture skills to both nursing and medical students. A randomized, pretest-posttest experimental design was employed. A total of 163 participants, 70 baccalaureate nursing students and 93 third-year medical students beginning their fundamental skills training were recruited. The students ranged in age from 20 to 55 years (mean 25). Fifty-eight percent were female and 68% percent perceived themselves as having average computer skills (25% declaring excellence). The methods of IV catheter education compared included a traditional method of instruction involving a scripted self-study module which involved a 10-minute videotape, instructor demonstration, and hands-on-experience using plastic mannequin arms. The second method involved an interactive multimedia, commercially made computer catheter simulator program utilizing virtual reality (CathSim). The pretest scores were similar between the computer and the traditional laboratory group. There was a significant improvement in cognitive gains, student satisfaction, and documentation of the procedure with the traditional laboratory group compared with the computer catheter simulator group. Both groups were similar in their ability to demonstrate the skill correctly. CONCLUSIONS; This evaluation and assessment was an initial effort to assess new teaching methodologies related to intravenous catheter placement and their effects on student learning outcomes and behaviors

  7. Designing Reflection and Symmetry Learning by Using Math Traditional Dance in Primary School

    Directory of Open Access Journals (Sweden)

    Yullys Helsa

    2011-01-01

    Full Text Available The innovation of education is an important point of Pendidikan Matematika Realistik Indonesia (PMRI, one of them through traditional dance as a context of national cultural. Dance that collaborated with concept of mathematics, it is called Math Traditional Dance. This research aims to produce learning line (specific the material of reflection and symmetry. The research method used is design research that consisted of preparing for the experiments, teaching experiments, and retrospective analysis. Data collected through observation, interviews, documentation and field notes. This research was conducted with 22 students in MIN 2 Palembang. From the try out that is obtained from the formal to the informal learning described in the learning process, so that support learning process of mirroring and symmetry for the students in grade four in elementary school.

  8. A Comparison of AH-64 Pilot Attitudes Toward Traditional and Glass Cockpit Crewstation Designs

    National Research Council Canada - National Science Library

    Francis, Gregory

    2002-01-01

    .... This finding suggested that the differences of crewstation design needed to be examined. To identify significant differences, this study assessed pilots' attitudes toward traditional and glass cockpit designs in the AH-64 Apache helicopter...

  9. Designing Reflection and Symmetry Learning by Using Math Traditional Dance in Primary School

    Directory of Open Access Journals (Sweden)

    Yullys Helsa

    2011-01-01

    Full Text Available The innovation of education is an important point of Pendidikan Matematika Realistik Indonesia (PMRI, one of them through traditional dance as a context of national cultural. Dance that collaborated with concept of mathematics, it is called Math Traditional Dance. This research aims to produce learning line (specific the material of reflection and symmetry. The research method used is design research that consisted of preparing for the experiments, teaching experiments, and retrospective analysis. Data collected through observation, interviews, documentation and field notes. This research was conducted with 22 students in MIN 2 Palembang. From the try out that is obtained from the formal to the informal learning described in the learning process, so that support learning process of mirroring and symmetry for the students in grade four in elementary school.Key words: PMRI, math traditional dance, design research, learning path, mirroring and symmetry DOI: http://dx.doi.org/10.22342/jme.2.1.782.79-94

  10. Adapting the Jukun Traditional Symbols for Textile Design and ...

    African Journals Online (AJOL)

    The uniqueness of Africa is not because of its geographical location, but because of its diverse rich cultural heritage, symbolic operation and adages that surround the entire spectrum of human learning, reasoning, and communication. This research work on adaptation of the Jukun cultural symbols for textile design gives a ...

  11. Evaluating the Design and Construction Flexibility of Traditional Malay House

    OpenAIRE

    Utaberta, Nangkula; Spalie, Nurhananie

    2011-01-01

    The ubiquitous terrace house is undeniably the most popular and affordable tihousing type in Malaysia. It has long been considered as one of the densest forms of property development and has become the common typology of accommodating the masses for this country. However, in Malaysia (like other third world countries), the design of a house has never grow from novelistic idea of style and revivalism. As stated by Tajuddin Rasdi (2003), housing in Malaysia has been plague with various issues f...

  12. Designing a qualitative methods syllabus

    OpenAIRE

    Kier, Elizabeth

    2003-01-01

    After some initial trepidation, I was excited about teaching a graduate seminar in qualitative methods. It could hardly be a more interesting time. The publication of King, Keohane, and Verba’s Designing Social Inquiry reinvigorated interest in qualitative methods, and I wanted to design the course to profit from this emerging debate. Whereas KKV appealed to qualitative researchers to do their best to adopt quantitative methodological guidelines, I wanted to encourage students to think about ...

  13. Feminist Policy Analysis: Expanding Traditional Social Work Methods

    Science.gov (United States)

    Kanenberg, Heather

    2013-01-01

    In an effort to move the methodology of policy analysis beyond the traditional and artificial position of being objective and value-free, this article is a call to those working and teaching in social work to consider a feminist policy analysis lens. A review of standard policy analysis models is presented alongside feminist models. Such a…

  14. Performance of traditional and direct labour procurement methods ...

    African Journals Online (AJOL)

    The objective was to find out if one has any advantage over the other. Project success determinants like cost, time and quality formed the basis for ... and unit cost of projects were higher for those procured using the traditional contract system.

  15. Non-traditional vibration mitigation methods for reciprocating compressor system

    NARCIS (Netherlands)

    Eijk, A.; Lange, T.J. de; Vreugd, J. de; Slis, E.J.P.

    2016-01-01

    Reciprocating compressors generate vibrations caused by pulsation-induced forces, mechanical (unbalanced) free forces and moments, crosshead guide forces and cylinder stretch forces. The traditional way of mitigating the vibration and cyclic stress levels to avoid fatigue failure of parts of the

  16. Molecular Methods for Identification of Microorganisms in Traditional Meat Products

    Science.gov (United States)

    Cocolin, Luca; Dolci, Paola; Rantsiou, Kalliopi

    Traditional fermentations are those that have been used for centuries and even pre-date written historical records. Fermentation processes have been developed to upgrade plant and animal materials, to yield a more acceptable food, to add flavor, to prevent the growth of pathogenic and spoilage microorganisms, and to preserve food without refrigeration (Hesseltine & Wang, 1980). Among fermented foods, sausages are the meat products with a longer history and tradition. It is often assumed that sausages were invented by the Sumerians, in what is Iraq today, around 3000 BC. Chinese sausage làcháng, which consisted of goat and lamb meat, was first mentioned in 589 BC. Homer, the poet of The Ancient Greece, mentioned a kind of blood sausage in the Odyssey (book 20, verse 25), and Epicharmus (ca. 550 BC-ca. 460 BC) wrote a comedy entitled “The Sausage”.

  17. Advances on geometric flux optical design method

    Science.gov (United States)

    García-Botella, Ángel; Fernández-Balbuena, Antonio Álvarez; Vázquez, Daniel

    2017-09-01

    Nonimaging optics is focused on the study of methods to design concentrators or illuminators systems. It can be included in the area of photometry and radiometry and it is governed by the laws of geometrical optics. The field vector method, which starts with the definition of the irradiance vector E, is one of the techniques used in nonimaging optics. Called "Geometrical flux vector" it has provide ideal designs. The main property of this model is, its ability to estimate how radiant energy is transferred by the optical system, from the concepts of field line, flux tube and pseudopotential surface, overcoming traditional raytrace methods. Nevertheless this model has been developed only at an academic level, where characteristic optical parameters are ideal not real and the studied geometries are simple. The main objective of the present paper is the application of the vector field method to the analysis and design of real concentration and illumination systems. We propose the development of a calculation tool for optical simulations by vector field, using algorithms based on Fermat`s principle, as an alternative to traditional tools for optical simulations by raytrace, based on reflection and refraction law. This new tool provides, first, traditional simulations results: efficiency, illuminance/irradiance calculations, angular distribution of light- with lower computation time, photometrical information needs about a few tens of field lines, in comparison with million rays needed nowadays. On the other hand the tool will provides new information as vector field maps produced by the system, composed by field lines and quasipotential surfaces. We show our first results with the vector field simulation tool.

  18. A blended design in acute care training: similar learning results, less training costs compared with a traditional format.

    Science.gov (United States)

    Dankbaar, Mary E W; Storm, Diana J; Teeuwen, Irene C; Schuit, Stephanie C E

    2014-09-01

    Introduction There is a demand for more attractive and efficient training programmes in postgraduate health care training. This retrospective study aims to show the effectiveness of a blended versus traditional face-to-face training design. For nurses in postgraduate Acute and Intensive Care training, the effectiveness of a blended course design was compared with a traditional design. Methods In a first pilot study 57 students took a traditional course (2-h lecture and 2-h workshop) and 46 students took a blended course (2-h lecture and 2-h online self-study material). Test results were compared for both groups. After positive results in the pilot study, the design was replicated for the complete programme in Acute and Intensive Care. Now 16 students followed the traditional programme (11 days face-to-face education) and 31 students did the blended programme (7 days face-to-face and 40 h online self-study). An evaluation was done after the pilot and course costs were calculated. Results Results show that the traditional and blended groups were similar regarding the main characteristics and did not differ in learning results for both the pilot and the complete programme. Student evaluations of both designs were positive; however, the blended group were more confident that they had achieved the learning objectives. Training costs were reduced substantially. Conclusion The blended training design offers an effective and attractive training solution, leading to a significant reduction in costs.

  19. COMPARISON OF THE TRADITIONAL STRENGTH OF MATERIALS APPROACH TO DESIGN WITH THE FRACTURE MECHANICS APPROACH

    International Nuclear Information System (INIS)

    Z. Ceylan

    2002-01-01

    The objective of this activity is to show that the use of the traditional strength of materials approach to the drip shield and the waste package (WP) designs is bounding and appropriate when compared to the fracture mechanics approach. The scope of this activity is limited to determining the failure assessment diagrams for the two materials at issue: Ti-7 and Alloy 22. This calculation is intended for use in support of the license application design of the drip shield and the WP. This activity is associated with the drip shield and the WP designs. The activity evaluation for work package number P32 12234F2, included in ''Technical Work Plan for: Waste Package Design Description for LA'' (Ref. 1, p. A-6), has determined that the development of this document is subject to ''Quality Assurance Requirements and Description'' requirements. The control of the electronic management of data is accomplished in accordance with the methods specified in Reference 1, Section 10. AP-3.124, ''Design Calculations and Analysis'' (Ref. 2), is used to develop and document the calculation

  20. Complete Dentures Fabricated with CAD/CAM Technology and a Traditional Clinical Recording Method.

    Science.gov (United States)

    Janeva, Nadica; Kovacevska, Gordana; Janev, Edvard

    2017-10-15

    The introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) technology into complete denture (CD) fabrication ushered in a new era in removable prosthodontics. Commercially available CAD/CAM denture systems are expected to improve upon the disadvantages associated with conventional fabrication. The purpose of this report is to present the workflow involved in fabricating a CD with a traditional clinical recording method and CAD/CAM technology and to summarize the advantages to the dental practitioner and the patient.

  1. Conciliation as the traditional method of disputes settlement in PRC

    Directory of Open Access Journals (Sweden)

    Svetlana F. Litvinova

    2011-12-01

    Full Text Available The author of the article researches one of the peculiarities of civil disputes settlement in China. This peculiarity is the conciliatory method that is used during disputes settlement. The using of the method is based on Confucianism. The content of the method has been viewed in the article.

  2. Collaboration through Flickr & Skype: Can Web 2.0 Technology Substitute the Traditional Design Studio in Higher Design Education?

    Science.gov (United States)

    Fleischmann, Katja

    2014-01-01

    Technology has not only changed the work practice of designers but also how design is taught and learned. The emergence of digital technology has made computer labs a central learning space for design students. Since this change, studio-based learning in its traditional sense appears to be in decline in higher education institutions. This is in…

  3. Improvement in the traditional processing method and nutritional quality of traditional extruded cassava-based snack (modified Ajogun).

    Science.gov (United States)

    Obadina, Adewale O; Oyewole, Olusola B; Williams, Oluwasolabomi E

    2013-07-01

    This study was carried out to investigate and improve the traditional processing method and nutritional quality of the traditional cassava snack (Ajogun). Cassava root (Manihot esculenta Crantz L.) of TME 419 variety was processed into mash (40% moisture content). The cassava mash was mixed into different blends to produce fried traditional "Ajogun", fried and baked extrudates (modified Ajogun) as snacks. These products were analyzed to determine the proximate composition including carbohydrate, fat, protein, fiber, ash, and moisture contents and functional properties such as bulk density. The results obtained for the moisture, fat, protein, and ash contents showed significant difference (P extrudates. However, there was no significant difference (P > 0.05) in the carbohydrate and fiber contents between the three samples. There was no significant difference (P > 0.05) in the bulk density of the snacks. Also, sensory evaluation was carried out on the cassava-based snacks using the 9-point hedonic scale to determine the degree of acceptability. Results obtained showed significant difference (P extrudates and control sample in terms of appearance, taste, flavor, color, aroma, texture, and overall acceptability. The highest acceptability level of the product was at 8.04 for the control sample (traditional Ajogun). This study has shown that "Ajogun", which is a lesser known cassava product, is rich in protein and fat.

  4. Effect of Traditional smoking Method on Nutritive Values and ...

    African Journals Online (AJOL)

    SH

    smoking method is an important preservation method which could enhance the nutritive values of fishes and possibly reduce post-harvest losses. Keywords: ... Fishery Laboratory of College of. Agricultural Sciences, Olabisi Onabanjo .... colour helps to determine quality, degree of processing or spoilage level (Clifford et al.,.

  5. TEXTILE DESIGN ON THE BASE OF THE GOLDEN GEOMETRY AND BULGARIAN NATIONAL TRADITION

    Directory of Open Access Journals (Sweden)

    ILIEVA Julieta

    2016-05-01

    Full Text Available The Golden and Fibonacci geometry forms are symbols of beauty and harmony. The shapes and symbols in the national traditions are always a source of creative ideas. The paper presents textile designs on the base of creations from the Golden and Fibonacci geometry and Bulgarian national tradition. Fourteen textile design project are presented with the use of the Golden spiral in the Golden square, Fibonacci series tiling with equalitarian triangles named Fibonacci rose and the spiral square with four Golden spirals from the Golden and Fibonacci geometry, and the three turtles – symbols from Kolobar tradition in Bulgarian national culture. The forms from the Golden and Fibonacci geometry are used directly as ornaments, constructional elements for ornaments, or as frames for entered elements. The symbols from Kolobar tradition are used directly as ornaments. Every design is presented in suitable two, three or four color model. The used geometrical forms from the Golden geometry and the Bulgarian national tradition are the base for successful textile design using the mirror, radial and translated symmetry and the plain rhythms as result from their combinations. The design is more successful when the geometrical ornaments are combined with suitable colors according to the connections between colors and lines on the base of their meaning, the latest fashion trends, and national traditions.

  6. Examining Delivery Method and Infant Feeding Intentions between Women in Traditional and Non-Traditional Prenatal Care.

    Science.gov (United States)

    Risisky, Deb; Chan, Ronna L; Zigmont, Victoria A; Asghar, Syed Masood; DeGennaro, Nancy

    2018-02-01

    Introduction The purpose of the study is to evaluate delivery method and breastfeeding initiation in women enrolled in group prenatal care (CenteringPregnancy) and in traditional prenatal care. Methods Data were obtained from medical records of a hospital-based midwifery practice in south central Connecticut that offered both types of prenatal care programs. Medical information from 307 women enrolled in this practice was included in the analysis. Out of the 307, 80 were enrolled in group prenatal care. Socio-demographic, lifestyle, and previous and current obstetrical information from medical records formed the basis of comparison. Bivariate and logistic regression analyses were carried out. Results Women in Centering had fewer planned cesarean sections (1.3 vs. 12.8%) and had a higher breastfeeding initiation (88.7 vs. 80.0%). However, Centering women were found to have a higher portion of unplanned cesarean sections (27.5 vs. 11.0%). Both the unadjusted and the adjusted odds ratios of having a cesarean planned delivery were lower in the group care. Women in Centering had 2.44 (95% CI 1.05, 5.66) times the odds of breastfeeding initiation compared to the odds for women in traditional prenatal care after adjusting for maternal age, smoking status, gestation and race. Discussion CenteringPregnancy can have positive impact for the woman and baby. This program implementation saw lower rates of elective cesarean sections and increased breastfeeding compared to women in traditional care.

  7. Numerical methods for metamaterial design

    CERN Document Server

    2013-01-01

    This book describes a relatively new approach for the design of electromagnetic metamaterials.  Numerical optimization routines are combined with electromagnetic simulations to tailor the broadband optical properties of a metamaterial to have predetermined responses at predetermined wavelengths. After a review of both the major efforts within the field of metamaterials and the field of mathematical optimization, chapters covering both gradient-based and derivative-free design methods are considered.  Selected topics including surrogate-base optimization, adaptive mesh search, and genetic algorithms are shown to be effective, gradient-free optimization strategies.  Additionally, new techniques for representing dielectric distributions in two dimensions, including level sets, are demonstrated as effective methods for gradient-based optimization.  Each chapter begins with a rigorous review of the optimization strategy used, and is followed by numerous examples that combine the strategy with either electromag...

  8. Traditional Methods Used in Family Planning and Conception in ...

    African Journals Online (AJOL)

    ... knowledge and incorporate it into the national health care delivery service. Researchers should document the available indigenous knowledge before they are forgotten while ascertaining the validity of some of the methods. Keywords: Maternal health, family planning, pregnancy management, homebased health care.

  9. Effects of different traditional cooking methods on nutrients and ...

    African Journals Online (AJOL)

    The objective of this research was to determine the effect of cooking using two different methods of preparing okra soup in Ondo state on nutrient, mineral content including zinc bioavailability of okra, Abelmoschus esculentus. The okra fruits were grated and divided into four lots; two lots were cooked with other ingredients of ...

  10. Innovative Teaching Practice: Traditional and Alternative Methods (Challenges and Implications)

    Science.gov (United States)

    Nurutdinova, Aida R.; Perchatkina, Veronika G.; Zinatullina, Liliya M.; Zubkova, Guzel I.; Galeeva, Farida T.

    2016-01-01

    The relevance of the present issue is caused be the strong need in alternative methods of learning foreign language and the need in language training and retraining for the modern professionals. The aim of the article is to identify the basic techniques and skills in using various modern techniques in the context of modern educational tasks. The…

  11. [Essential procedure and key methods for survey of traditional knowledge related to Chinese materia medica resources].

    Science.gov (United States)

    Cheng, Gong; Huang, Lu-qi; Xue, Da-yuan; Zhang, Xiao-bo

    2014-12-01

    The survey of traditional knowledge related to Chinese materia medica resources is the important component and one of the innovative aspects of the fourth national survey of the Chinese materia medica resources. China has rich traditional knowledge of traditional Chinese medicine (TCM) and the comprehensive investigation of TCM traditional knowledge aims to promote conservation and sustainable use of Chinese materia medica resources. Building upon the field work of pilot investigations, this paper introduces the essential procedures and key methods for conducting the survey of traditional knowledge related to Chinese materia medica resources. The essential procedures are as follows. First is the preparation phrase. It is important to review all relevant literature and provide training to the survey teams so that they have clear understanding of the concept of traditional knowledge and master key survey methods. Second is the field investigation phrase. When conducting field investigations, survey teams should identify the traditional knowledge holders by using the 'snowball method', record the traditional knowledge after obtaining prior informed concerned from the traditional knowledge holders. Researchers should fill out the survey forms provided by the Technical Specification of the Fourth National Survey of Chinese Materia Medica Resources. Researchers should pay particular attention to the scope of traditional knowledge and the method of inheriting the knowledge, which are the key information for traditional knowledge holders and potential users to reach mutual agreed terms to achieve benefit sharing. Third is the data compilation and analysis phrase. Researchers should try to compile and edit the TCM traditional knowledge in accordance with intellectual property rights requirements so that the information collected through the national survey can serve as the basic data for the TCM traditional knowledge database. The key methods of the survey include regional

  12. How to Flip the Classroom--"Productive Failure or Traditional Flipped Classroom" Pedagogical Design?

    Science.gov (United States)

    Song, Yanjie; Kapur, Manu

    2017-01-01

    The paper reports a quasi-experimental study comparing the "traditional flipped classroom" pedagogical design with the "productive failure" (Kapur, 2016) pedagogical design in the flipped classroom for a 2-week curricular unit on polynomials in a Hong Kong Secondary school. Different from the flipped classroom where students…

  13. Usability Studies in Virtual and Traditional Computer Aided Design Environments for Fault Identification

    Science.gov (United States)

    2017-08-08

    communicate their subjective opinions. Keywords: Usability Analysis; CAVETM (Cave Automatic Virtual Environments); Human Computer Interface (HCI...the differences in interaction when compared with traditional human computer interfaces. This paper provides analysis via usability study methods

  14. Blasting vibrations control: The shortcomings of traditional methods

    Energy Technology Data Exchange (ETDEWEB)

    Vuillaume, P.M.; Kiszlo, M. [Institut National de l`Environnement Industriel et des Risques, Verneuil en Halatte (France); Bernard, T. [Compagnie Nouvelle de Scientifiques, Nice (France)

    1996-12-31

    In the context of its studies for the French ministry of the environment and for the French national coal board, INERIS (the French institute for the industrial environment and hazards, formerly CERCHAR) has made a complete critical survey of the methods generally used to reduce the levels of blasting vibrations. It is generally acknowledged that the main parameter to control vibrations is the so-called instantaneous charge, or charge per delay. This should be reduced as much as possible in order to diminish vibration levels. On account of this, the use of a new generation of blasting devices, such as non-electric detonators or electronic sequential timers has been developed since the seventies. INERIS has collected data from about 900 blasts in 2 quarries and 3 open pit mines. These data include input parameters such as borehole diameter, burden, spacing, charge per hole, charge per delay, total fired charge, etc ... They also include output measurements, such as vibration peak particle velocities, and main frequencies. These data have been analyzed with the help of multi variable statistical tools. Blasting tests were undertaken to evaluate new methods of vibrations control, such as the superposition of vibration signals. These methods appear to be accurate in many critical cases, but certainly would be highly improved with a better accuracy of firing delays. The development of electronic detonators seems to be the way of the future for a better blasting control.

  15. Exploring Non-Traditional Learning Methods in Virtual and Real-World Environments

    Science.gov (United States)

    Lukman, Rebeka; Krajnc, Majda

    2012-01-01

    This paper identifies the commonalities and differences within non-traditional learning methods regarding virtual and real-world environments. The non-traditional learning methods in real-world have been introduced within the following courses: Process Balances, Process Calculation, and Process Synthesis, and within the virtual environment through…

  16. Optimization methods in structural design

    CERN Document Server

    Rothwell, Alan

    2017-01-01

    This book offers an introduction to numerical optimization methods in structural design. Employing a readily accessible and compact format, the book presents an overview of optimization methods, and equips readers to properly set up optimization problems and interpret the results. A ‘how-to-do-it’ approach is followed throughout, with less emphasis at this stage on mathematical derivations. The book features spreadsheet programs provided in Microsoft Excel, which allow readers to experience optimization ‘hands-on.’ Examples covered include truss structures, columns, beams, reinforced shell structures, stiffened panels and composite laminates. For the last three, a review of relevant analysis methods is included. Exercises, with solutions where appropriate, are also included with each chapter. The book offers a valuable resource for engineering students at the upper undergraduate and postgraduate level, as well as others in the industry and elsewhere who are new to these highly practical techniques.Whi...

  17. A Comparison of Case Study and Traditional Teaching Methods for Improvement of Oral Communication and Critical-Thinking Skills

    Science.gov (United States)

    Noblitt, Lynnette; Vance, Diane E.; Smith, Michelle L. DePoy

    2010-01-01

    This study compares a traditional paper presentation approach and a case study method for the development and improvement of oral communication skills and critical-thinking skills in a class of junior forensic science majors. A rubric for rating performance in these skills was designed on the basis of the oral communication competencies developed…

  18. A Comparative Study on Power Point Presentation and Traditional Lecture Method in Material Understandability, Effectiveness and Attitude

    Science.gov (United States)

    Sewasew, Daniel; Mengestle, Missaye; Abate, Gebeyehu

    2015-01-01

    The aim of this study was to compare PPT and traditional lecture method in material understandability, effectiveness and attitude among university students. Comparative descriptive survey research design was employed to answer the research questions raised. Four hundred and twenty nine participants were selected randomly using stratified sampling…

  19. Engineering design of systems models and methods

    CERN Document Server

    Buede, Dennis M

    2009-01-01

    The ideal introduction to the engineering design of systems-now in a new edition. The Engineering Design of Systems, Second Edition compiles a wealth of information from diverse sources to provide a unique, one-stop reference to current methods for systems engineering. It takes a model-based approach to key systems engineering design activities and introduces methods and models used in the real world. Features new to this edition include: * The addition of Systems Modeling Language (SysML) to several of the chapters, as well as the introduction of new terminology * Additional material on partitioning functions and components * More descriptive material on usage scenarios based on literature from use case development * Updated homework assignments * The software product CORE (from Vitech Corporation) is used to generate the traditional SE figures and the software product MagicDraw UML with SysML plugins (from No Magic, Inc.) is used for the SysML figures This book is designed to be an introductory reference ...

  20. Comparing interactive videodisc training effectiveness to traditional training methods

    International Nuclear Information System (INIS)

    Kenworthy, N.W.

    1987-01-01

    Videodisc skills training programs developed by Industrial Training Corporation are being used and evaluated by major industrial facilities. In one such study, interactive videodisc training programs were compared to videotape and instructor-based training to determine the effectiveness of videodisc in terms of performance, training time and trainee attitudes. Results showed that when initial training was done using the interactive videodisc system, trainee performance was superior to the performance of trainees using videotape, and approximately equal to the performance of those trained by an instructor. When each method was used in follow-up training, interactive videodisc was definitely the most effective. Results also indicate that training time can be reduced using interactive videodisc. Attitudes of both trainees and instructors toward the interactive videodisc training were positive

  1. Reliability studies of diagnostic methods in Indian traditional Ayurveda medicine: An overview

    Science.gov (United States)

    Kurande, Vrinda Hitendra; Waagepetersen, Rasmus; Toft, Egon; Prasad, Ramjee

    2013-01-01

    Recently, a need to develop supportive new scientific evidence for contemporary Ayurveda has emerged. One of the research objectives is an assessment of the reliability of diagnoses and treatment. Reliability is a quantitative measure of consistency. It is a crucial issue in classification (such as prakriti classification), method development (pulse diagnosis), quality assurance for diagnosis and treatment and in the conduct of clinical studies. Several reliability studies are conducted in western medicine. The investigation of the reliability of traditional Chinese, Japanese and Sasang medicine diagnoses is in the formative stage. However, reliability studies in Ayurveda are in the preliminary stage. In this paper, examples are provided to illustrate relevant concepts of reliability studies of diagnostic methods and their implication in practice, education, and training. An introduction to reliability estimates and different study designs and statistical analysis is given for future studies in Ayurveda. PMID:23930037

  2. Device and method for traditional chinese medicine diagnosis using radioactive tracer method

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Shanling; Shen, Miaohe

    1997-05-29

    Disclosed is a device and method for traditional chinese medicine diagnosis using radioactive-tracer method. At least two nuclear radiation probes are arranged apart along the channels to detect the changing with time and on space of the intensity of radioactivity of the nuclear radioactive tracer which has been injected into the body in the channel position. The detected signals are amplified by amplifiers, and the outputs of the amplifiers are applied to data processing means which monitor the whole detecting process in real time and analyse and process the detected information about the changing of the intensity of radioactivity with time and on space indicating the operating of vital energy and blood, and obtain state parameters about operating of vital energy and blood in the body which is then output through data output means. (author) figs.

  3. Prevalence of depressive symptoms among medical students taught using problem-based learning versus traditional methods.

    Science.gov (United States)

    Aragão, José Aderval; Freire, Marianna Ribeiro de Menezes; Nolasco Farias, Lucas Guimarães; Diniz, Sarah Santana; Sant'anna Aragão, Felipe Matheus; Sant'anna Aragão, Iapunira Catarina; Lima, Tarcisio Brandão; Reis, Francisco Prado

    2018-06-01

    To compare depressive symptoms among medical students taught using problem-based learning (PBL) and the traditional method. Beck's Depression Inventory was applied to 215 medical students. The prevalence of depression was calculated as the number of individuals with depression divided by the total number in the sample from each course, with 95% confidence intervals. The statistical significance level used was 5% (p ≤ .05). Among the 215 students, 52.1% were male and 47.9% were female; and 51.6% were being taught using PBL methodology and 48.4% using traditional methods. The prevalence of depression was 29.73% with PBL and 22.12% with traditional methods. There was higher prevalence among females: 32.8% with PBL and 23.1% with traditional methods. The prevalence of depression with PBL among students up to 21 years of age was 29.4% and among those over 21 years, 32.1%. With traditional methods among students up to 21 years of age, it was 16.7%%, and among those over 21 years, 30.1%. The prevalence of depression with PBL was highest among students in the second semester and with traditional methods, in the eighth. Depressive symptoms were highly prevalent among students taught both with PBL and with traditional methods.

  4. [Applications of mathematical statistics methods on compatibility researches of traditional Chinese medicines formulae].

    Science.gov (United States)

    Mai, Lan-Yin; Li, Yi-Xuan; Chen, Yong; Xie, Zhen; Li, Jie; Zhong, Ming-Yu

    2014-05-01

    The compatibility of traditional Chinese medicines (TCMs) formulae containing enormous information, is a complex component system. Applications of mathematical statistics methods on the compatibility researches of traditional Chinese medicines formulae have great significance for promoting the modernization of traditional Chinese medicines and improving clinical efficacies and optimizations of formulae. As a tool for quantitative analysis, data inference and exploring inherent rules of substances, the mathematical statistics method can be used to reveal the working mechanisms of the compatibility of traditional Chinese medicines formulae in qualitatively and quantitatively. By reviewing studies based on the applications of mathematical statistics methods, this paper were summarized from perspective of dosages optimization, efficacies and changes of chemical components as well as the rules of incompatibility and contraindication of formulae, will provide the references for further studying and revealing the working mechanisms and the connotations of traditional Chinese medicines.

  5. Perspective for applying traditional and inovative teaching and learning methods to nurses continuing education

    OpenAIRE

    Bendinskaitė, Irmina

    2015-01-01

    Bendinskaitė I. Perspective for applying traditional and innovative teaching and learning methods to nurse’s continuing education, magister thesis / supervisor Assoc. Prof. O. Riklikienė; Departament of Nursing and Care, Faculty of Nursing, Lithuanian University of Health Sciences. – Kaunas, 2015, – p. 92 The purpose of this study was to investigate traditional and innovative teaching and learning methods perspective to nurse’s continuing education. Material and methods. In a period fro...

  6. Integration of membrane distillation into traditional salt farming method: Process development and modelling

    Science.gov (United States)

    Hizam, S.; Bilad, M. R.; Putra, Z. A.

    2017-10-01

    Farmers still practice the traditional salt farming in many regions, particularly in Indonesia. This archaic method not only produces low yield and poor salt quality, it is also laborious. Furthermore, the farming locations typically have poor access to fresh water and are far away from electricity grid, which restrict upgrade to a more advanced technology for salt production. This paper proposes a new concept of salt harvesting method that improves the salt yield and at the same time facilitates recovery of fresh water from seawater. The new concept integrates solar powered membrane distillation (MD) and photovoltaic cells to drive the pumping. We performed basic solar still experiments to quantify the heat flux received by a pond. The data were used as insight for designing the proposed concept, particularly on operational strategy and the most effective way to integrate MD. After the conceptual design had been developed, we formulated mass and energy balance to estimate the performance of the proposed concept. Based on our data and design, it is expected that the system would improve the yield and quality of the salt production, maximizing fresh water harvesting, and eventually provides economical gain for salt farmers hence improving their quality of life. The key performance can only be measured via experiment using gain output ratio as performance indicator, which will be done in a future study.

  7. A novel classification method for aid decision of traditional Chinese patent medicines for stroke treatment.

    Science.gov (United States)

    Zhao, Yufeng; Liu, Bo; He, Liyun; Bai, Wenjing; Yu, Xueyun; Cao, Xinyu; Luo, Lin; Rong, Peijing; Zhao, Yuxue; Li, Guozheng; Liu, Baoyan

    2017-09-01

    Traditional Chinese patent medicines are widely used to treat stroke because it has good efficacy in the clinical environment. However, because of the lack of knowledge on traditional Chinese patent medicines, many Western physicians, who are accountable for the majority of clinical prescriptions for such medicine, are confused with the use of traditional Chinese patent medicines. Therefore, the aid-decision method is critical and necessary to help Western physicians rationally use traditional Chinese patent medicines. In this paper, Manifold Ranking is employed to develop the aid-decision model of traditional Chinese patent medicines for stroke treatment. First, 115 stroke patients from three hospitals are recruited in the cross-sectional survey. Simultaneously, traditional Chinese physicians determine the traditional Chinese patent medicines appropriate for each patient. Second, particular indicators are explored to characterize the population feature of traditional Chinese patent medicines for stroke treatment. Moreover, these particular indicators can be easily obtained byWestern physicians and are feasible for widespread clinical application in the future. Third, the aid-decision model of traditional Chinese patent medicines for stroke treatment is constructed based on Manifold Ranking. Experimental results reveal that traditional Chinese patent medicines can be differentiated. Moreover, the proposed model can obtain high accuracy of aid decision.

  8. Blended Design Approach of Long Span Structure and Malay Traditional Architecture

    Science.gov (United States)

    Sundari, Titin

    2017-12-01

    The growing population in the world is so fast, which is followed by the increasing need of some new and large activities. Architects face the problem on how to facilitate buildings with various activities such as for large meeting, conference, indoors gymnasium and sports, and many others. The long span structure of building is one of the solutions to solve that problem. Generally, large buildings which implemented this structure will look as a technological, modern and futuristic ones or even neo futuristic performance. But on the other hand, many people still want to enjoy the specific and unique senses of local traditional architecture. So is the Malay people who want an easy pleasant large facilities which can be fulfilled by implementing modern long span building structure technology. In the same time, their unique sense of Malay traditional architecture can still be maintained. To overcome this double problems of design, it needs a blended design approach of long span structure and Malay Traditional Architecture.

  9. Teaching in Cyberspace: Online versus Traditional Instruction Using a Waiting-List Experimental Design

    Science.gov (United States)

    Poirier, Christopher R.; Feldman, Robert S.

    2004-01-01

    To test the effectiveness of an online introductory psychology course, we randomly assigned students to a large, traditional course or to an online course from a population of students who indicated that either course type was acceptable using a "waiting list" experimental design. Students in the online course performed better on exams and equally…

  10. Using traditional methods and indigenous technologies for coping with climate variability

    NARCIS (Netherlands)

    Stigter, C.J.; Zheng Dawei,; Onyewotu, L.O.Z.; Mei Xurong,

    2005-01-01

    In agrometeorology and management of meteorology related natural resources, many traditional methods and indigenous technologies are still in use or being revived for managing low external inputs sustainable agriculture (LEISA) under conditions of climate variability. This paper starts with the

  11. Efficacy of traditional maize (Zea mays L.) seed storage methods in ...

    African Journals Online (AJOL)

    Efficacy of traditional maize (Zea mays L.) seed storage methods in western Kenya. ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) ... African Journal of Food, Agriculture, Nutrition and Development.

  12. Web-based versus traditional lecture: are they equally effective as a flexible bronchoscopy teaching method?

    OpenAIRE

    Sterse Mata, Caio Augusto [UNIFESP; Ota, Luiz Hirotoshi [UNIFESP; Suzuki, Iunis [UNIFESP; Telles, Adriana [UNIFESP; Miotto, Andre [UNIFESP; Leao, Luiz Eduardo Villaca [UNIFESP

    2012-01-01

    This study compares the traditional live lecture to a web-based approach in the teaching of bronchoscopy and evaluates the positive and negative aspects of both methods. We developed a web-based bronchoscopy curriculum, which integrates texts, images and animations. It was applied to first-year interns, who were later administered a multiple-choice test. Another group of eight first-year interns received the traditional teaching method and the same test. the two groups were compared using the...

  13. Injury survey of a non-traditional 'soft-edged' trampoline designed to lower equipment hazards.

    Science.gov (United States)

    Eager, David B; Scarrott, Carl; Nixon, Jim; Alexander, Keith

    2013-01-01

    In Australia trampolines contribute one quarter of all childhood play equipment injuries. The objective of this study was to gather and evaluate injury data from a non-traditional, 'soft-edged', consumer trampoline, where the design aimed to minimise injuries from the equipment and from falling off. The manufacturer of the non-traditional trampoline provided the University of Technology Sydney with their Australian customer database. The study involved surveys in Queensland and New South Wales, between May 2007 and March 2010. Initially injury data was gathered by a phone interview pilot study, then in the full study, through an email survey. The 3817 respondents were the carers of child users of the 'soft-edge' trampolines. Responses were compared with Australian and US emergency department data. In both countries the proportion of injuries caused by the equipment and falling off was compared with the proportion caused by the jumpers to themselves or each other. The comparisons showed a significantly lower proportion resulted from falling-off or hitting the equipment for this design when compared to traditional trampolines, both in Australia and the US. This research concludes that equipment-induced and falling-off injuries, the more severe injuries on traditional trampolines, can be significantly reduced with appropriate trampoline design.

  14. Comparison of Online and Traditional Basic Life Support Renewal Training Methods for Registered Professional Nurses.

    Science.gov (United States)

    Serwetnyk, Tara M; Filmore, Kristi; VonBacho, Stephanie; Cole, Robert; Miterko, Cindy; Smith, Caitlin; Smith, Charlene M

    2015-01-01

    Basic Life Support certification for nursing staff is achieved through various training methods. This study compared three American Heart Association training methods for nurses seeking Basic Life Support renewal: a traditional classroom approach and two online options. Findings indicate that online methods for Basic Life Support renewal deliver cost and time savings, while maintaining positive learning outcomes, satisfaction, and confidence level of participants.

  15. The Ornamental Design of Traditional Malay Utensils (Kukuran in Peninsula Malaysia

    Directory of Open Access Journals (Sweden)

    Md Yusoff Zulkfli bin

    2016-01-01

    Full Text Available Woodcarving is a significant craft in Malay society that reflects the local traditions and customs. It is a manifestation of craftsmen artistic skills and intutitive ideas into a piece of wood. It is also manifestation of the creative process of imitation, denaturalization, stylization and abstraction. Historically, the Malay craftsmen have created many attractive traditional art forms and one of it is the coconut graters (kukuran. The ornamental carved kukuran is closely related to its Malay woodcarving tradition and philosophy. The aim of this paper is to illustrate this tradition of the great traditional Malay kukuran, the testiment of its time through its visual characteristics and design composition. This study presents an analysis of six kukuran, which were gathered from the state museums in Peninsular Malaysia. The discussion is focused on the formalistic and iconology aspects of the kukuran carving ornaments. The finding briefly shows the fusion of Malay concept of beauty, Malay culture and the understanding of Islam had been manifested in these domestic utensils - the ornamental kukuran

  16. Quantitative methods for studying design protocols

    CERN Document Server

    Kan, Jeff WT

    2017-01-01

    This book is aimed at researchers and students who would like to engage in and deepen their understanding of design cognition research. The book presents new approaches for analyzing design thinking and proposes methods of measuring design processes. These methods seek to quantify design issues and design processes that are defined based on notions from the Function-Behavior-Structure (FBS) design ontology and from linkography. A linkograph is a network of linked design moves or segments. FBS ontology concepts have been used in both design theory and design thinking research and have yielded numerous results. Linkography is one of the most influential and elegant design cognition research methods. In this book Kan and Gero provide novel and state-of-the-art methods of analyzing design protocols that offer insights into design cognition by integrating segmentation with linkography by assigning FBS-based codes to design moves or segments and treating links as FBS transformation processes. They propose and test ...

  17. Directory of Design Support Methods

    National Research Council Canada - National Science Library

    Dean, T

    1998-01-01

    This Directory contains records of human factors databases, handbooks, data guides, texts, journals, standardization documents, prototype and interface design tools, analytic techniques, and computer simulation software...

  18. Directory of Design Support Methods

    National Research Council Canada - National Science Library

    Dean, T

    1997-01-01

    This Directory contains records of human factors databases, handbooks, data guides, texts, journals, standardization documents, prototype and interface design tools, analytic techniques, and computer simulation software...

  19. Strategies of Energy Efficiency Design in Traditional Kangbaiwan Mansion in China

    Directory of Open Access Journals (Sweden)

    Song Xiaoqing

    2016-01-01

    Full Text Available The building sector is one of the highest energy consuming sectors in the world as well as in China, it is urgent to seek an energy efficiency way of sustainable architecture development. From the perspective of tradition, this paper focus on strategies of energy efficiency design that contained in excellent vernacular dwellings. On the basis of analyzing an example of Kangbaiwan Mansion, it illustrates the advantage of environment ecosystem, and summarizes the physical and cultural characteristic of its buildings, especially the climate-adapting overall arrangement and sustainable strategies of natural ventilation and passive solar gain, which can be a fertile source of modern energy efficiency architecture design as well as a proper way of inheriting the outstanding traditional culture.

  20. Comparison the Students Satisfaction of Traditional and Integrated Teaching Method in Physiology Course

    Directory of Open Access Journals (Sweden)

    Keshavarzi Z.

    2016-02-01

    Full Text Available Aims: Different education methods play crucial roles to improve education quality and students’ satisfaction. In the recent years, medical education highly changes through new education methods. The aim of this study was to compare medical students’ satisfaction in traditional and integrated methods of teaching physiology course. Instrument and Methods: In the descriptive analysis study, fifty 4th semester medical students of Bojnourd University of Medical Sciences were studied in 2015. The subjects were randomly selected based on availability. Data was collected by two researcher-made questionnaires; their validity and reliability were confirmed. Questionnaure 1 was completed by the students after presenting renal and endocrinology topics via traditional and integrated methods. Questionnaire 2 was only completed by the students after presenting the course via integrated method. Data was analyzed by SPSS 16 software using dependent T test. Findings: Mean score of the students’ satisfaction in traditional method (24.80±3.48 was higher than integrated method (22.30±4.03; p<0.0001. In the integrated method, most of the students were agreed and completely agreed on telling stories from daily life (76%, sitting mode in the classroom (48%, an attribution of cell roles to the students (60%, showing movies and animations (76%, using models (84%, and using real animal parts (72% during teaching, as well as expressing clinical items to enhance learning motivations (76%. Conclusion: Favorable satisfaction of the students in traditional lecture method to understand the issues, as well as their acceptance of new and active methods of learning, show effectiveness and efficiency of traditional method and the requirement of its enhancement by the integrated methods

  1. Method for control-room display design

    International Nuclear Information System (INIS)

    Montmayeul, R.

    1988-01-01

    This document describes a method for control-room displays design. It can be used either for isolated display to add to an existing system either for the design of a full system of operator aids. The method is a top-down design with steps of possible iteration. The emphasis is put on display design rather than on system design; system aspects are just mentioned. Advantages of using a method are described [fr

  2. The Design Social: Framing social research methods for design postgraduates.

    OpenAIRE

    Evans, Martyn

    2010-01-01

    This paper discusses approaches for framing social research methods within postgraduate design curricula, details the responses of postgraduate design students to the possibilities presented by social research methods, and concludes with a case study of the adoption experiences of PhD students in design when engaging with social research methods. Analysis of semi-structured interviews is employed to draw out perceptions and experiences of design postgraduates when engaging with social researc...

  3. Analysis of Conflict Centers in Projects Procured with Traditional and Integrated Methods in Nigeria

    Directory of Open Access Journals (Sweden)

    Martin O. Dada

    2012-07-01

    Full Text Available Conflicts in any organization can either be functional or dysfunctional and can contribute to or detract from the achievement of organizational or project objectives. This study investigated the frequency and intensity of conflicts, using five conflict centers, on projects executed with either the integrated or traditional method in Nigeria. Questionnaires were administered through purposive and snowballing techniques on 274 projects located in twelve states of Nigeria and Abuja. 94 usable responses were obtained. The collected data were subjected to both descriptive and inferential statistical analysis. In projects procured with traditional methods, conflicts relating to resources for project execution had the greatest frequency, while conflicts around project/client goals had the least frequency. For projects executed with integrated methods, conflicts due to administrative procedures were ranked highest while conflicts due to project/client goals were ranked least. Regarding seriousness of conflict, conflicts due to administrative procedures and resources for project execution were ranked highest respectively for projects procured with traditional and integrated methods. Additionally, in terms of seriousness, personality issues and project/client goals were the least sources of conflict in projects executed with traditional and integrated methods. There were no significant differences in the incidence of conflicts, using the selected conflict centers, between the traditional and integrated procurement methods. There was however significant difference in the intensity or seriousness of conflicts between projects executed with the traditional method and those executed with integrated methods in the following areas: technical issues, administrative matters and personality issues. The study recommends that conscious efforts should be made at teambuilding on projects executed with integrated methods.

  4. Design methods and design theory for architectural design management

    NARCIS (Netherlands)

    Achten, H.H.; Otter, den A.F.H.J.; Achten, H.H.; Pels, H.J.

    2008-01-01

    Most parties that an architectural design manager meets in daily practice are engaged to some degree with design. What these parties are actually doing in a project is contingent with the concrete design project. Additionally, each party has some stake, and may employ different strategies to solve

  5. The Ideal Female Body on the Packaging Design of Traditional Medicine (Jamu

    Directory of Open Access Journals (Sweden)

    Listia Natadjaja

    2014-05-01

    Full Text Available Jamu, an Indonesian traditional medicine used for treating ailments or sicknesses  is also well known as a product for slimming especially for women.  Through its packaging design, jamu for women depict female body in the form of photograph and illustrations. The female body is constructed to be seen attractive and become the ideal body. The research aims to read the ideal female body on the packaging design of jamu and to reveal the ideology behind them. We analyzed the packaging design of jamu related to the formation of female body produced by five major manufacturers of traditional medicine that has survived for at least three generations: Air Mancur, Sido Muncul, Jamu Jago, Nyonya Meneer and Jamu Iboe. This analysis uses Roland Barthes' semiotic theory that reveals the linguistic message, the denoted image and rhetoric of the image. Ideal body is still struggling around the stereotype that physically described as thin and also plum with the emphasise on slim waist, big hip and breast. In keeping with the Javanese philosophy, woman's body is identical to the nature. The construction of female body is closely related to social and cultural context. Through the object and the pose, female body is depicted as traditional and modern, natural and cultural.

  6. Climate Chamber Experiment-Based Thermal Analysis and Design Improvement of Traditional Huizhou Masonry Walls

    Directory of Open Access Journals (Sweden)

    Ling Dong

    2018-03-01

    Full Text Available Supported by thousands of years of history, traditional Huizhou buildings have played a vital role, both functionally and culturally, as residential buildings in China. Masonry walls are one of the key building components of a Huizhou building; however, the traditional Huizhou masonry wall structure, predominantly a hollow brick structure, cannot meet the local building energy code requirements, and thus needs to be improved. Within this context, the present research measures the actual thermal performance of traditional Huizhou masonry walls for historical buildings and new-built buildings, which results in mean thermal transmittances of 1.892 W/m2·K and 2.821 W/m2·K, respectively, while the local building energy code requires a minimum thermal transmittance of 1.500 W/m2·K. In order to improve the thermal performance of traditional Huizhou masonry walls, four design scenarios for wall insulation are proposed and tested in a climate chamber: (1 hollow brick wall with inorganic interior insulation mortar, (2 solid brick wall with inorganic interior insulation mortar, (3 hollow brick wall with foamed concrete, and (4 hollow brick wall with foamed concrete plus inorganic interior insulation mortar. The experiment results indicate that, among the four proposed design scenarios, only scenario 4 can significantly improve the thermal performance of Huizhou masonry walls and meet the building energy code requirements, with a mean thermal transmittance of 1.175 W/m2·K. This research lays the foundation for improving the thermal performance of Huizhou masonry walls with new insulation and construction technology, thereby helping to improve the quality of life of Huizhou residents while respecting the cultural significance of the traditional Huizhou building.

  7. Perceptions about traditional and novel methods to learn about postoperative pain management: a qualitative study.

    Science.gov (United States)

    Ingadottir, Brynja; Blondal, Katrin; Jaarsma, Tiny; Thylen, Ingela

    2016-11-01

    The aim of this study was to explore the perceptions of surgical patients about traditional and novel methods to learn about postoperative pain management. Patient education is an important part of postoperative care. Contemporary technology offers new ways for patients to learn about self-care, although face-to-face discussions and brochures are the most common methods of delivering education in nursing practice. A qualitative design with a vignette and semi-structured interviews used for data collection. A purposeful sample of 13 postsurgical patients, who had been discharged from hospital, was recruited during 2013-2014. The patients were given a vignette about anticipated hospital discharge after surgery with four different options for communication (face-to-face, brochure, website, serious game) to learn about postoperative pain management. They were asked to rank their preferred method of learning and thereafter to reflect on their choices. Data were analysed using an inductive content analysis approach. Patients preferred face-to-face education with a nurse, followed by brochures and websites, while games were least preferred. Two categories, each with two sub-categories, emerged from the data. These conceptualized the factors affecting patients' perceptions: (1) 'Trusting the source', sub-categorized into 'Being familiar with the method' and 'Having own prejudgments'; and (2) 'Being motivated to learn' sub-categorized into 'Managing an impaired cognition' and 'Aspiring for increased knowledge'. To implement successfully novel educational methods into postoperative care, healthcare professionals need to be aware of the factors influencing patients' perceptions about how to learn, such as trust and motivation. © 2016 John Wiley & Sons Ltd.

  8. Developing Employability Skills in Information System Graduates: Traditional vs. Innovative Teaching Methods

    Science.gov (United States)

    Osmani, Mohamad; Hindi, Nitham M.; Weerakkody, Vishanth

    2018-01-01

    It is widely acknowledged that traditional teaching methods such as lectures, textbooks and case study techniques on their own are not adequate to improving the most in-demand employability skills for graduates. The aim of this article is to explore the potential impact that novel learning and teaching methods can have on improving the…

  9. Deep learning versus traditional machine learning methods for aggregated energy demand prediction

    NARCIS (Netherlands)

    Paterakis, N.G.; Mocanu, E.; Gibescu, M.; Stappers, B.; van Alst, W.

    2018-01-01

    In this paper the more advanced, in comparison with traditional machine learning approaches, deep learning methods are explored with the purpose of accurately predicting the aggregated energy consumption. Despite the fact that a wide range of machine learning methods have been applied to

  10. Computer game-based and traditional learning method: a comparison regarding students’ knowledge retention

    Directory of Open Access Journals (Sweden)

    Rondon Silmara

    2013-02-01

    Full Text Available Abstract Background Educational computer games are examples of computer-assisted learning objects, representing an educational strategy of growing interest. Given the changes in the digital world over the last decades, students of the current generation expect technology to be used in advancing their learning requiring a need to change traditional passive learning methodologies to an active multisensory experimental learning methodology. The objective of this study was to compare a computer game-based learning method with a traditional learning method, regarding learning gains and knowledge retention, as means of teaching head and neck Anatomy and Physiology to Speech-Language and Hearing pathology undergraduate students. Methods Students were randomized to participate to one of the learning methods and the data analyst was blinded to which method of learning the students had received. Students’ prior knowledge (i.e. before undergoing the learning method, short-term knowledge retention and long-term knowledge retention (i.e. six months after undergoing the learning method were assessed with a multiple choice questionnaire. Students’ performance was compared considering the three moments of assessment for both for the mean total score and for separated mean scores for Anatomy questions and for Physiology questions. Results Students that received the game-based method performed better in the pos-test assessment only when considering the Anatomy questions section. Students that received the traditional lecture performed better in both post-test and long-term post-test when considering the Anatomy and Physiology questions. Conclusions The game-based learning method is comparable to the traditional learning method in general and in short-term gains, while the traditional lecture still seems to be more effective to improve students’ short and long-term knowledge retention.

  11. Seismic design and analysis methods

    International Nuclear Information System (INIS)

    Varpasuo, P.

    1993-01-01

    Seismic load is in many areas of the world the most important loading situation from the point of view of structural strength. Taking this into account it is understandable, that there has been a strong allocation of resources in the seismic analysis during the past ten years. In this study there are three areas of the center of gravity: (1) Random vibrations; (2) Soil-structure interaction and (3) The methods for determining structural response. The solution of random vibration problems is clarified with the aid of applications in this study and from the point of view of mathematical treatment and mathematical formulations it is deemed sufficient to give the relevant sources. In the soil-structure interaction analysis the focus has been the significance of frequency dependent impedance functions. As a result it was obtained, that the description of the soil with the aid of frequency dependent impedance functions decreases the structural response and it is thus always the preferred method when compared to more conservative analysis types. From the methods to determine the C structural response the following four were tested: (1) The time history method; (2) The complex frequency-response method; (3) Response spectrum method and (4) The equivalent static force method. The time history appeared to be the most accurate method and the complex frequency-response method did have the widest area of application. (orig.). (14 refs., 35 figs.)

  12. Research on the localization method of protecting traditional village landscape: a case study on Tangyin

    Directory of Open Access Journals (Sweden)

    W. Li

    2015-08-01

    Full Text Available China has over 271 million villages and less than the number in ten years ago in which there are 363 million villages. New rural construction indeed do some good for common villages but still destroy hundreds and thousands traditional village which contain great cultural, science, artistic values. In addition, traditional villages can't meet the increasing needs in more convenient and comfortable living conditions. Increasing population also makes traditional villages out of control in construction. With the background of this, we have to set up in traditional village protection. This article put forward an idea in protection which make use of landscape localization to pursue the sustainable development and vernacular landscape protection. Tangyin Town is a famous trade center in history and left many cultural heritage, especially historical buildings. Take Tangyin as a case study to apply the localization method which could guide other similar villages to achieve same goals.

  13. Biomimetic design method for innovation and sustainability

    CERN Document Server

    Helfman Cohen, Yael

    2017-01-01

    Presenting a novel biomimetic design method for transferring design solutions from nature to technology, this book focuses on structure-function patterns in nature and advanced modeling tools derived from TRIZ, the theory of inventive problem-solving. The book includes an extensive literature review on biomimicry as an engine of both innovation and sustainability, and discusses in detail the biomimetic design process, current biomimetic design methods and tools. The structural biomimetic design method for innovation and sustainability put forward in this text encompasses (1) the research method and rationale used to develop and validate this new design method; (2) the suggested design algorithm and tools including the Findstructure database, structure-function patterns and ideality patterns; and (3) analyses of four case studies describing how to use the proposed method. This book offers an essential resource for designers who wish to use nature as a source of inspiration and knowledge, innovators and sustain...

  14. Computer game-based and traditional learning method: a comparison regarding students' knowledge retention.

    Science.gov (United States)

    Rondon, Silmara; Sassi, Fernanda Chiarion; Furquim de Andrade, Claudia Regina

    2013-02-25

    Educational computer games are examples of computer-assisted learning objects, representing an educational strategy of growing interest. Given the changes in the digital world over the last decades, students of the current generation expect technology to be used in advancing their learning requiring a need to change traditional passive learning methodologies to an active multisensory experimental learning methodology. The objective of this study was to compare a computer game-based learning method with a traditional learning method, regarding learning gains and knowledge retention, as means of teaching head and neck Anatomy and Physiology to Speech-Language and Hearing pathology undergraduate students. Students were randomized to participate to one of the learning methods and the data analyst was blinded to which method of learning the students had received. Students' prior knowledge (i.e. before undergoing the learning method), short-term knowledge retention and long-term knowledge retention (i.e. six months after undergoing the learning method) were assessed with a multiple choice questionnaire. Students' performance was compared considering the three moments of assessment for both for the mean total score and for separated mean scores for Anatomy questions and for Physiology questions. Students that received the game-based method performed better in the pos-test assessment only when considering the Anatomy questions section. Students that received the traditional lecture performed better in both post-test and long-term post-test when considering the Anatomy and Physiology questions. The game-based learning method is comparable to the traditional learning method in general and in short-term gains, while the traditional lecture still seems to be more effective to improve students' short and long-term knowledge retention.

  15. Design Method of Active Disturbance Rejection Variable Structure Control System

    Directory of Open Access Journals (Sweden)

    Yun-jie Wu

    2015-01-01

    Full Text Available Based on lines cluster approaching theory and inspired by the traditional exponent reaching law method, a new control method, lines cluster approaching mode control (LCAMC method, is designed to improve the parameter simplicity and structure optimization of the control system. The design guidelines and mathematical proofs are also given. To further improve the tracking performance and the inhibition of the white noise, connect the active disturbance rejection control (ADRC method with the LCAMC method and create the extended state observer based lines cluster approaching mode control (ESO-LCAMC method. Taking traditional servo control system as example, two control schemes are constructed and two kinds of comparison are carried out. Computer simulation results show that LCAMC method, having better tracking performance than the traditional sliding mode control (SMC system, makes the servo system track command signal quickly and accurately in spite of the persistent equivalent disturbances and ESO-LCAMC method further reduces the tracking error and filters the white noise added on the system states. Simulation results verify the robust property and comprehensive performance of control schemes.

  16. Reasons for using traditional methods and role of nurses in family planning.

    Science.gov (United States)

    Yurdakul, Mine; Vural, Gülsen

    2002-05-01

    The withdrawal method and other traditional methods of contraception are still used in Turkey. Ninety-eight percent of women in Turkey know about modern family planning methods and where to find contraceptives. In fact, only one in every three women uses an effective method. The aim of this descriptive and experimental study was to investigate reasons for using traditional methods and the role of nurses in family planning. The women included in the sample were visited in their homes by nurses and educated for family planning in four sessions. Overall, 53.3% of women were using an effective method. However, 54.3% of women living in the Sirintepe district and 41.6% of women living in the Yenikent district were still using the traditional methods they used before. After the education sessions, the most widely used method was found to be intrauterine device (22.8%) in Sirintepe and condom (25%) in Yenikent. There was a significant difference in family planning methods between these two districts (p < 0.001).

  17. Application methods of infrared thermal images in the health care field of traditional Chinese medicine

    Science.gov (United States)

    Li, Ziru; Zhang, Xusheng

    2008-12-01

    Infrared thermal imaging (ITI) is the potential imaging technique for the health care field of traditional Chinese medicine (TCM). Successful application demands obeying the characteristics and regularity of the ITI of human body and designing rigorous trials. First, the influence of time must be taken into account as the ITI of human body varies with time markedly. Second, relative magnitude is preferred to be the index of the image features. Third, scatter diagrams and the method of least square could present important information for evaluating the health care effect. A double-blind placebo-controlled randomized trial was undertaken to study the influences of Shengsheng capsule, one of the TCM health food with immunity adjustment function, on the ITI of human body. The results showed that the effect of Shengsheng capsule to people with weak constitution or in the period of being weak could be reflected objectively by ITI. The relative efficacy rate was 81.3% for the trial group and 30.0% for the control group, there was significant difference between the two groups (P=0.003). So the sensitivity and objectivity of ITI are of great importance to the health care field of TCM.

  18. [Discussion on ideological concept implied in traditional reinforcing and reducing method of acupuncture].

    Science.gov (United States)

    Li, Suyun; Zhao, Jingsheng

    2017-11-12

    The forming and development of traditional reinforcing and reducing method of acupuncture was rooted in traditional culture of China, and was based on the ancients' special understanding of nature, life and diseases, therefore its principle and methods were inevitably influenced by philosophy culture and medicine concept at that time. With deep study on Inner Canon of Huangdi and representative reinforcing and reducing method of acupuncture, the implied ideological concept, including contradiction view and profit-loss view in ancient dialectic, yin-yang balance theory, concept of life flow, monophyletic theory of qi , theory of existence of disease-evil, yin - yang astrology theory, theory of inter-promotion of five elements, were summarized and analyzed. The clarified and systematic understanding on guiding ideology of reinforcing and reducing method of acupuncture could significantly promote the understanding on principle, method, content and manipulation.

  19. How often do patients in primary care use the methods of traditional medicine

    Directory of Open Access Journals (Sweden)

    Petrov-Kiurski Miloranka

    2014-01-01

    Full Text Available Introduction: Traditional medicine is a comprehensive system of theory and practice, implemented in the prevention, diagnostics and treatment of diseases, which utilizes preparations of vegetable, animal and mineral origin, as well as methods of spiritual therapy Objective: 1. To estimate how many patients in primary care use traditional medicine for diagnostics, treatment and prevention of diseases, and to establish possible differences regarding gender, age and urban or rural location. 2. What methods of traditional medicine are the most often used, and for which diseases and conditions? 3. Why did the subjects opted for this type of treatment, and what was the effect of the therapy? Method: Multicentric research based on interviewing patients in five outpatient health centers in Serbia. As a survey instrument was used a questionnaire with 10 questions. Results: The study included 1157 subjects, 683 women and 474 men, mean age 60.22±14.54, The traditional medicine was used by 83.66% (79.96% males and 86.245% females. Information about the methods of traditional medicine subjects usually received from their friends and acquaintances (54.9% and the media (39.3%. There is no significant difference in the way of obtaining information in relation to gender. Information on the internet was obtained more often in subjects younger than 65 (p=0.000 and in urban population (p=0.000. The same is true for information obtained from doctor or pharmacist (p=0.003. They opted for this method because in their opinion it is less harmful and have less adverse effects (72.8%. This type of treatment patients used for treatment of muscles, bone and joint diseases - 28.5%, diseases of the heart and blood vessels -21,1 %, and for the treatment of pain 19.7%. Patients from rural areas more often used traditional medicine for treatment of cardiovascular diseases (p=0.000. Outcome of treatment was good or satisfactory in 45.3%, moderate in 32%, and in 15.8% effect was

  20. The integration of traditional and advanced design in the formation of sustainable New Rural Housing solutions.

    Science.gov (United States)

    Khai Tran, Van

    2018-04-01

    Socio-economic growth in Vietnam greatly depends on the new rural development process in this country; the work is considered a strategic position in national development. Thus, the study of the principles of the architectural design of new rural housing solutions in accordance with the New Rural Environment as required by the Vietnam Ministry of Construction has become urgent. Climate change has become a global concern, so the creation of significant impacts by architectural designs to respond to climate change and make the living environment of rural people better is a major demand. Experience has shown that the dogmatic application of current urban-type housing does not reach the requirements of New Rural Housing. This research intends to show that the solutions of the traditional Vietnamese rural house, which retains the advantages of traditional architecture with excellent characteristics that have been challenged over thousands of years, when combined with advanced design methodologies and technologies, will be the appropriate solution for ‘New Rural Housing’.

  1. Teaching-learning: stereoscopic 3D versus Traditional methods in Mexico City.

    Science.gov (United States)

    Mendoza Oropeza, Laura; Ortiz Sánchez, Ricardo; Ojeda Villagómez, Raúl

    2015-01-01

    In the UNAM Faculty of Odontology, we use a stereoscopic 3D teaching method that has grown more common in the last year, which makes it important to know whether students can learn better with this strategy. The objective of the study is to know, if the 4th year students of the bachelor's degree in dentistry learn more effectively with the use of stereoscopic 3D than the traditional method in Orthodontics. first, we selected the course topics, to be used for both methods; the traditional method using projection of slides and for the stereoscopic third dimension, with the use of videos in digital stereo projection (seen through "passive" polarized 3D glasses). The main topic was supernumerary teeth, including and diverted from their guide eruption. Afterwards we performed an exam on students, containing 24 items, validated by expert judgment in Orthodontics teaching. The results of the data were compared between the two educational methods for determined effectiveness using the model before and after measurement with the statistical package SPSS 20 version. The results presented for the 9 groups of undergraduates in dentistry, were collected with a total of 218 students for 3D and traditional methods, we found in a traditional method a mean 4.91, SD 1.4752 in the pretest and X=6.96, SD 1.26622, St Error 0.12318 for the posttest. The 3D method had a mean 5.21, SD 1.996779 St Error 0.193036 for the pretest X= 7.82, SD =0.963963, St Error 0.09319 posttest; the analysis of Variance between groups F= 5.60 Prob > 0.0000 and Bartlett's test for equal variances 21.0640 Prob > chi2 = 0.007. These results show that the student's learning in 3D means a significant improvement as compared to the traditional teaching method and having a strong association between the two methods. The findings suggest that the stereoscopic 3D method lead to improved student learning compared to traditional teaching.

  2. Field camp: Using traditional methods to train the next generation of petroleum geologists

    Science.gov (United States)

    Puckette, J.O.; Suneson, N.H.

    2009-01-01

    The summer field camp experience provides many students with their best opportunity to learn the scientific process by making observations and collecting, recording, evaluating, and interpreting geologic data. Field school projects enhance student professional development by requiring cooperation and interpersonal interaction, report writing to communicate interpretations, and the development of project management skills to achieve a common goal. The field school setting provides students with the opportunity to observe geologic features and their spatial distribution, size, and shape that will impact the student's future careers as geoscientists. The Les Huston Geology Field Camp (a.k.a. Oklahoma Geology Camp) near Ca??on City, Colorado, focuses on time-tested traditional methods of geological mapping and fieldwork to accomplish these goals. The curriculum consists of an introduction to field techniques (pacing, orienteering, measuring strike and dip, and using a Jacob's staff), sketching outcrops, section measuring (one illustrating facies changes), three mapping exercises (of increasing complexity), and a field geophysics project. Accurate rock and contact descriptions are emphasized, and attitudes and contacts are mapped in the field. Mapping is done on topographic maps at 1:12,000 and 1:6000 scales; air photos are provided. Global positioning system (GPS)-assisted mapping is allowed, but we insist that locations be recorded in the field and confirmed using visual observations. The course includes field trips to the Cripple Creek and Leadville mining districts, Floris-sant/Guffey volcano area, Pikes Peak batholith, and the Denver Basin. Each field trip is designed to emphasize aspects of geology that are not stressed in the field exercises. Students are strongly encouraged to accurately describe geologic features and gather evidence to support their interpretations of the geologic history. Concise reports are a part of each major exercise. Students are grouped

  3. The Efficacy of the clay meat ball as a method of traditional meat ...

    African Journals Online (AJOL)

    Keywords: meat ball, protein, mineral content. This work was carried out to determine the effectiveness of the use of clay meat balls (an African traditional method of preserving meat) in extending the shelf life of meat over a period of months against microbial (bacterial and fungal) spoilage and contamination without ...

  4. A Comparison of Traditional Worksheet and Linear Programming Methods for Teaching Manure Application Planning.

    Science.gov (United States)

    Schmitt, M. A.; And Others

    1994-01-01

    Compares traditional manure application planning techniques calculated to meet agronomic nutrient needs on a field-by-field basis with plans developed using computer-assisted linear programming optimization methods. Linear programming provided the most economical and environmentally sound manure application strategy. (Contains 15 references.) (MDH)

  5. Enhancing Learning Using 3D Printing: An Alternative to Traditional Student Project Methods

    Science.gov (United States)

    McGahern, Patricia; Bosch, Frances; Poli, DorothyBelle

    2015-01-01

    Student engagement during the development of a three-dimensional visual aid or teaching model can vary for a number of reasons. Some students report that they are not "creative" or "good at art," often as an excuse to justify less professional outcomes. Student engagement can be low when using traditional methods to produce a…

  6. Spatial Visualization Learning in Engineering: Traditional Methods vs. a Web-Based Tool

    Science.gov (United States)

    Pedrosa, Carlos Melgosa; Barbero, Basilio Ramos; Miguel, Arturo Román

    2014-01-01

    This study compares an interactive learning manager for graphic engineering to develop spatial vision (ILMAGE_SV) to traditional methods. ILMAGE_SV is an asynchronous web-based learning tool that allows the manipulation of objects with a 3D viewer, self-evaluation, and continuous assessment. In addition, student learning may be monitored, which…

  7. An Aural Learning Project: Assimilating Jazz Education Methods for Traditional Applied Pedagogy

    Science.gov (United States)

    Gamso, Nancy M.

    2011-01-01

    The Aural Learning Project (ALP) was developed to incorporate jazz method components into the author's classical practice and her applied woodwind lesson curriculum. The primary objective was to place a more focused pedagogical emphasis on listening and hearing than is traditionally used in the classical applied curriculum. The components of the…

  8. A cookbook method for Persuasive Game Design

    Directory of Open Access Journals (Sweden)

    Panote Siriaraya

    2018-03-01

    Full Text Available Despite the growing interest in persuasive game design, there have been few methods which cover the complete process of game design that designers could draw upon in their practice. In this paper, the Persuasive Game Design method(PGD is presented as a non-directive approach for designing persuasive games including a practical hand-out. To better fit with the practical constraints encountered in game design, this method adopts a “cookbook” approach. A set of essential PGD components and tools are provided from which game designers can choose from, given their specific context and resources. Designers first consider the game design steps(“dishes” to use in creating their game and in each step, select which components(“ingredients” to take into account and tools(“utensils” to use. The proposed method, based on our experience as persuasive game researchers and design practitioners, is further refined using feedback from professional game designers. The paper concludes with a case study illustrating how to put the meal into practice. Overall, the method provides a useful contribution to the existing research domain by combining knowledge from game theory, game design and design methodology to create a structured yet flexible approach which covers the complete persuasive game design process for researchers, students and practitioners. 

  9. Design with the feet: walking methods and participatory design

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Bertelsen, Pernille; Madsen, Jacob Østergaard

    2014-01-01

    This paper presents an analysis of walking methods and their relation to participatory design (PD). The paper includes a study of walking methods found in the literature and an empirical study of transect walks in a PD project. From this analysis, we identify central attributes of, and challenges...... to, PD walks. Walking with people in the context of design is a natural activity for the participatory designer, who acknowledges the importance of immersion and relationships in design. However, the various intentions of walking approaches indicate an underacknowledged awareness of walking methods...

  10. Design methods as discourse on practice

    DEFF Research Database (Denmark)

    Cohn, Marisa

    2010-01-01

    In this paper, we present a view of design methods as discourse on practice. We consider how the deployment of a particular set of design methods enables and constrains not only practical action but also discursive action within the design practice. A case study of agile software development meth...... of practices. We then discuss implications of this view on methods for CSCW research on the relationship between methods and practice as well as implications for participation in the design process.......In this paper, we present a view of design methods as discourse on practice. We consider how the deployment of a particular set of design methods enables and constrains not only practical action but also discursive action within the design practice. A case study of agile software development...... methods illustrates the ways that methods establish conditions for who can speak in the design process and how. We indentify three main kinds of discourse work performed in the invoking of design methods. These are the establishing of ontologies, the authorizing of voices, and the legitimizing...

  11. [Designs and thoughts of real world integrated data warehouse from HIS on re-evaluation of post-maketing traditional Chinese medicine].

    Science.gov (United States)

    Zhuang, Yan; Xie, Bangtie; Weng, Shengxin; Xie, Yanming

    2011-10-01

    To discuss the feasibility and necessity of using HIS data integration to build large data warehouse system which is extensively used on re-evaluation of post-marketing traditional Chinese medicine, and to provide the thought and method of the overall design for it. With domestic and overseas' analysis and comparison on clinical experiments' design based on real world using electronic information system, and with characteristics of HIS in China, a general framework was designed and discussed which refers to design thought, design characteristics, existing problems and solutions and so on. A design scheme of HIS data warehouse on re-evaluation of post-marketing traditional Chinese medicine was presented. The design scheme was proved to be high coherence and low coupling, safe, Universal, efficient and easy to maintain, which can effectively solve the problems many hospitals have faced during the process of HIS data integration.

  12. Teaching Healthcare Design. Methods for Empathy

    DEFF Research Database (Denmark)

    Dankl, Kathrina

    2017-01-01

    discussed in design. By evidence of a design course focusing on shared decision making (SDM), this paper promotes a blended set of methods, supporting enhanced understanding amongst stakeholders. The empirical data and the comparison with contemporary SDM studies indicate that student designers were able......Healthcare design requires empathetic understanding among all stakeholders and consequently the development of design for empathy. While design anthropological approaches are broadly discussed, spanning from social design to social innovation, analysis methods for human insights are less widely...... to address some of the most vividly discussed issues in the field: the adaption of SDM to the diversity of patients, the flow of information between the different stakeholders and the general knowledge on SDM by clinicians and the wider public. This paper provides design educators with a series of methods...

  13. Identification of the traditional methods of newborn mothers regarding jaundice in Turkey.

    Science.gov (United States)

    Aydin, Diler; Karaca Ciftci, Esra; Karatas, Hulya

    2014-02-01

    To detect traditional methods applied for the treatment of newborn jaundice by mothers in Turkey. Traditional methods are generally used in our society. Instead of using medical services, people often use already-known traditional methods to treat the disease. In such cases, the prognosis of the disease generally becomes worse, the treatment period longer and healthcare costs higher, and more medicine is used. A cross-sectional descriptive study. The participants of this study were 229 mothers with newborn babies aged 0-28 days in one university hospital and one public children's hospital in Sanliurfa. The study was conducted between March and May 2012. In this research, the Beliefs and Traditional Methods of Mothers for Jaundice Questionnaire, which was formed by searching the relevant literature, is used as a data collection tool. The data are evaluated by percentage distributions. Mothers apply conventional practices in cases of health problems such as jaundice, and application of these methods is important to mothers. Moreover, mothers reported applying hazardous conventional methods in cases of neonatal jaundice, such as cutting the area between the baby's eyebrows with a blade, cutting the back of the ear and the body and burning the body, which are not applied in different cultures. Education regarding the effects of conventional methods being applied in families should be provided, and the results of this study should serve to guide further studies in assessing the effects of such education. This approach can support beneficial practices involving individual care and prevent the negative health effects of hazardous practices. © 2013 John Wiley & Sons Ltd.

  14. General method for designing wave shape transformers.

    Science.gov (United States)

    Ma, Hua; Qu, Shaobo; Xu, Zhuo; Wang, Jiafu

    2008-12-22

    An effective method for designing wave shape transformers (WSTs) is investigated by adopting the coordinate transformation theory. Following this method, the devices employed to transform electromagnetic (EM) wave fronts from one style with arbitrary shape and size to another style, can be designed. To verify this method, three examples in 2D spaces are also presented. Compared with the methods proposed in other literatures, this method offers the general procedure in designing WSTs, and thus is of great importance for the potential and practical applications possessed by such kinds of devices.

  15. Comparison of traditional and interactive teaching methods in a UK emergency department.

    Science.gov (United States)

    Armstrong, Peter; Elliott, Tim; Ronald, Julie; Paterson, Brodie

    2009-12-01

    Didactic teaching remains a core component of undergraduate education, but developing computer assisted learning (CAL) packages may provide useful alternatives. We compared the effectiveness of interactive multimedia-based tutorials with traditional, lecture-based models for teaching arterial blood gas interpretation to fourth year medical students. Participants were randomized to complete a tutorial in either lecture or multimedia format containing identical content. Upon completion, students answered five multiple choice questions assessing post-tutorial knowledge, and provided feedback on their allocated learning method. Marks revealed no significant difference between either group. All lecture candidates rated their teaching as good, compared with 89% of the CAL group. All CAL users found multiple choice questions assessment useful, compared with 83% of lecture participants. Both groups highlighted the importance of interaction. CAL complements other teaching methods, but should be seen as an adjunct to, rather than a replacement for, traditional methods, thus offering students a blended learning environment.

  16. Identification of some Fusarium species from selected crop seeds using traditional method and BIO-PCR

    Directory of Open Access Journals (Sweden)

    Tomasz Kulik

    2012-12-01

    Full Text Available We identified a species level of the fungal cultures isolated from selected crop seeds using traditional method and BIO-PCR. The use of BIO-PCR did not correspond completely to the morphological analyses. Both methods showed increased infection with F. poae in winter wheat seed sample originated from north Poland. Fungal culture No 40 (isolated from faba bean and identified with traditional method as mixed culture with F. culmorum and F. graminearum did not produce expected product after PCR reaction with species specific primers OPT18F470, OPT18R470. However, the use of additional primers Fc01F, Fc01R allowed for reliable identification of F. culmorum in the culture.

  17. Protocol design and implementation using formal methods

    NARCIS (Netherlands)

    van Sinderen, Marten J.; Ferreira Pires, Luis; Pires, L.F.; Vissers, C.A.

    1992-01-01

    This paper reports on a number of formal methods that support correct protocol design and implementation. These methods are placed in the framework of a design methodology for distributed systems that was studied and developed within the ESPRIT II Lotosphere project (2304). The paper focuses on

  18. HTGR analytical methods and design verification

    International Nuclear Information System (INIS)

    Neylan, A.J.; Northup, T.E.

    1982-05-01

    Analytical methods for the high-temperature gas-cooled reactor (HTGR) include development, update, verification, documentation, and maintenance of all computer codes for HTGR design and analysis. This paper presents selected nuclear, structural mechanics, seismic, and systems analytical methods related to the HTGR core. This paper also reviews design verification tests in the reactor core, reactor internals, steam generator, and thermal barrier

  19. Gender preference between traditional and PowerPoint methods of teaching gross anatomy.

    Science.gov (United States)

    Nuhu, Saleh; Adamu, Lawan Hassan; Buba, Mohammed Alhaji; Garba, Sani Hyedima; Dalori, Babagana Mohammed; Yusuf, Ashiru Hassan

    2018-01-01

    Teaching and learning process is increasingly metamorphosing from the traditional chalk and talk to the modern dynamism in the information and communication technology. Medical education is no exception to this dynamism more especially in the teaching of gross anatomy, which serves as one of the bases of understanding the human structure. This study was conducted to determine the gender preference of preclinical medical students on the use of traditional (chalk and talk) and PowerPoint presentation in the teaching of gross anatomy. This was cross-sectional and prospective study, which was conducted among preclinical medical students in the University of Maiduguri, Nigeria. Using simple random techniques, a questionnaire was circulated among 280 medical students, where 247 students filled the questionnaire appropriately. The data obtained was analyzed using SPSS version 20 (IBM Corporation, Armonk, NY, USA) to find the method preferred by the students among other things. Majority of the preclinical medical students in the University of Maiduguri preferred PowerPoint method in the teaching of gross anatomy over the conventional methods. The Cronbach alpha value of 0.76 was obtained which is an acceptable level of internal consistency. A statistically significant association was found between gender and preferred method of lecture delivery on the clarity of lecture content where females prefer the conventional method of lecture delivery whereas males prefer the PowerPoint method, On the reproducibility of text and diagram, females prefer PowerPoint method of teaching gross anatomy while males prefer the conventional method of teaching gross anatomy. There are gender preferences with regard to clarity of lecture contents and reproducibility of text and diagram. It was also revealed from this study that majority of the preclinical medical students in the University of Maiduguri prefer PowerPoint presentation over the traditional chalk and talk method in most of the

  20. A hybrid optimization method for biplanar transverse gradient coil design

    International Nuclear Information System (INIS)

    Qi Feng; Tang Xin; Jin Zhe; Jiang Zhongde; Shen Yifei; Meng Bin; Zu Donglin; Wang Weimin

    2007-01-01

    The optimization of transverse gradient coils is one of the fundamental problems in designing magnetic resonance imaging gradient systems. A new approach is presented in this paper to optimize the transverse gradient coils' performance. First, in the traditional spherical harmonic target field method, high order coefficients, which are commonly ignored, are used in the first stage of the optimization process to give better homogeneity. Then, some cosine terms are introduced into the series expansion of stream function. These new terms provide simulated annealing optimization with new freedoms. Comparison between the traditional method and the optimized method shows that the inhomogeneity in the region of interest can be reduced from 5.03% to 1.39%, the coil efficiency increased from 3.83 to 6.31 mT m -1 A -1 and the minimum distance of these discrete coils raised from 1.54 to 3.16 mm

  1. Culture, Interface Design, and Design Methods for Mobile Devices

    Science.gov (United States)

    Lee, Kun-Pyo

    Aesthetic differences and similarities among cultures are obviously one of the very important issues in cultural design. However, ever since products became knowledge-supporting tools, the visible elements of products have become more universal so that the invisible parts of products such as interface and interaction are getting more important. Therefore, the cultural design should be extended to the invisible elements of culture like people's conceptual models beyond material and phenomenal culture. This chapter aims to explain how we address the invisible cultural elements in interface design and design methods by exploring the users' cognitive styles and communication patterns in different cultures. Regarding cultural interface design, we examined users' conceptual models while interacting with mobile phone and website interfaces, and observed cultural difference in performing tasks and viewing patterns, which appeared to agree with cultural cognitive styles known as Holistic thoughts vs. Analytic thoughts. Regarding design methods for culture, we explored how to localize design methods such as focus group interview and generative session for specific cultural groups, and the results of comparative experiments revealed cultural difference on participants' behaviors and performance in each design method and led us to suggest how to conduct them in East Asian culture. Mobile Observation Analyzer and Wi-Pro, user research tools we invented to capture user behaviors and needs especially in their mobile context, were also introduced.

  2. Product-service system method to measure sustainability level of traditional smoked fish processing industries

    OpenAIRE

    Purwaningsih Ratna; Cahyantari Anggaina Elfandora; Ariyani Zulfaida; Susanty Aries; Arvianto Ary; Santoso Haryo

    2018-01-01

    Small Medium Enterprise’s (SME) of traditional fish processing at Semarang, Central Java, Indonesia still focus their business on gain more profits. Sustainability aspect has not received enough attention yet. This study aims to review the sustainability level of SME smoked fish Semarang using product service system (PSS) method. PSS consists of three dimensions (1) Environment, (2) Socio-cultural and (3) Economic. Each dimension consists of 6 criteria's. PSS not only assess the level of sust...

  3. Analysis of Conflict Centers in Projects Procured with Traditional and Integrated Methods in Nigeria

    OpenAIRE

    Martin O. Dada

    2012-01-01

    Conflicts in any organization can either be functional or dysfunctional and can contribute to or detract from the achievement of organizational or project objectives. This study investigated the frequency and intensity of conflicts, using five conflict centers, on projects executed with either the integrated or traditional method in Nigeria. Questionnaires were administered through purposive and snowballing techniques on 274 projects located in twelve states of Nigeria and Abuja. 94 usable ...

  4. Participatory design methods in telemedicine research

    DEFF Research Database (Denmark)

    Danbjørg, Dorthe Boe; Clemensen, Jane; Rothmann, Mette Juel

    together with the patients. Participatory design is a research design and methodology that encourages the participation of users in the design process of technological solutions. Therefore, it has a potential for designing technologies that actually reflect the needs of the users, why it is relevant within...... telemedicine. The aim of this presentation is to explain the process and theoretical framework of a PD project; give an example of a project including the applied methods, and to determine its application to telemedicine with focus on the rationale for genuine participation. Theory: Participation implies....... Methods: Key activities of a Participatory Design project comprise methods such as fieldwork; literature reviewing; development and testing, and user activities as workshops. Methods that support telling, making, enacting. For instance telling activities as drivers for participation, where practitioners...

  5. The comparison of solar water heating system operation parameters calculated using traditional method and dynamic simulations

    Directory of Open Access Journals (Sweden)

    Sornek Krzysztof

    2016-01-01

    Full Text Available The proper design of renewable energy based systems is really important to provide their efficient and safe operation. The aim of this paper is to compare the results obtained during traditional static calculations, with the results of dynamic simulations. For this reason, simulations of solar water heating (SWH system, designed for a typical residential building, were conducted in the TRNSYS (Transient System Simulation Tool. Carried out calculations allowed to determine the heat generation in the discussed system as well as to estimate the efficiency of considered installation. Obtained results were compared with the results from other available tool based on the static calculations. It may be concluded, that using dynamic simulations at the designing stage of renewable energy based systems may help to avoid many exploitation problems (including low efficiency, overheating etc. and allows to provide safe exploitation of such installations.

  6. A standardized method for beam design in neutron capture therapy

    International Nuclear Information System (INIS)

    Storr, G.J.: Harrington, B.V.

    1993-01-01

    A desirable end point for a given beam design for Neutron Capture Therapy (NCT) should be quantitative description of tumour control probability and normal tissue damage. Achieving this goal will ultimately rely on data from NCT human clinical trials. Traditional descriptions of beam designs have used a variety of assessment methods to quantify proposed or installed beam designs. These methods include measurement and calculation of open-quotes free fieldclose quotes parameters, such as neutron and gamma flux intensities and energy spectra, and figures-of-merit in tissue equivalent phantoms. The authors propose here a standardized method for beam design in NCT. This method would allow all proposed and existing NCT beam facilities to be compared equally. The traditional approach to determining a quantitative description of tumour control probability and normal tissue damage in NCT research may be described by the following path: Beam design → dosimetry → macroscopic effects → microscopic effects. Methods exist that allow neutron and gamma fluxes and energy dependence to be calculated and measured to good accuracy. By using this information and intermediate dosimetric quantities such as kerma factors for neutrons and gammas, macroscopic effect (absorbed dose) in geometries of tissue or tissue-equivalent materials can be calculated. After this stage, for NCT the data begins to become more sparse and in some areas ambiguous. Uncertainties in the Relative Biological Effectiveness (RBE) of some NCT dose components means that beam designs based on assumptions considered valid a few years ago may have to be reassessed. A standard method is therefore useful for comparing different NCT facilities

  7. Drafting method of electricity and electron design

    International Nuclear Information System (INIS)

    Gungbon, Junchun

    1989-11-01

    This book concentrates on drafting of electricity and electron design. It deals with The meaning of electricity and electron drafting JIS standard regulation the types of drafting and line and letter, basics drafting with projection drafting method, plan projection and development elevation, Drafting method of shop drawing, practical method of design and drafting, Design and drafting of technic and illustration, Connection diagram, Drafting of wiring diagram for light and illumination, Drafting of development connection diagram for sequence control, Drafting of logic circuit sign of flow chart and manual, drafting for a electron circuit diagram and Drawing of PC board.

  8. Computer-Aided Design Methods for Model-Based Nonlinear Engine Control Systems, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Traditional design methods for aircraft turbine engine control systems have relied on the use of linearized models and linear control theory. While these controllers...

  9. A new criterion of photostimulated luminescence (PSL) method to detect irradiated traditional Chinese medicinal herbs

    International Nuclear Information System (INIS)

    Zhang, Liwen; Lin, Tong; Jiang, Yingqiao; Bi, Fujun

    2013-01-01

    This work used a new criterion to analyze 162 varieties (222 batches) of traditional Chinese medicinal herbs based on the European Standard EN 13751 (2009. Foodstuffs—Detection of Irradiated Food Using Photostimulated Luminescence. European Committee for Standardization, Brussels, Belgium). The characteristics of PSL signals are described, and a new criterion is established. Compared to EN 13751, the new criterion uses clearer definition to evaluate instead of the ambiguous descriptions in EN Standard, such as “much greater than” and “within the same order of magnitude”. Moreover, the accuracy of the new criterion is as good as or better than EN Standard in regard to classifying irradiated and non-irradiated traditional Chinese medicinal herbs. It can help to avoid false positive result when a non-irradiated herb got a screening PSL measurement above 5000 counts/60 s. This new criterion of photostimulated luminescence method can be applied to identify the irradiation status of traditional Chinese medicinal herbs, even if the medicinal herbs were irradiated at a low dose (0.3 kGy) or stored in the dark at room temperature for 24 months after the irradiation treatment. - Highlights: • Clearer evaluation criterion instead of the ambiguous descriptions in EN 13751. • Accuracy satisfied. • Large sample size provides outstanding representativeness. • Systematical evaluation on PSL method

  10. Web-based versus traditional lecture: are they equally effective as a flexible bronchoscopy teaching method?

    Science.gov (United States)

    Mata, Caio Augusto Sterse; Ota, Luiz Hirotoshi; Suzuki, Iunis; Telles, Adriana; Miotto, Andre; Leão, Luiz Eduardo Vilaça

    2012-01-01

    This study compares the traditional live lecture to a web-based approach in the teaching of bronchoscopy and evaluates the positive and negative aspects of both methods. We developed a web-based bronchoscopy curriculum, which integrates texts, images and animations. It was applied to first-year interns, who were later administered a multiple-choice test. Another group of eight first-year interns received the traditional teaching method and the same test. The two groups were compared using the Student's t-test. The mean scores (± SD) of students who used the website were 14.63 ± 1.41 (range 13-17). The test scores of the other group had the same range, with a mean score of 14.75 ± 1. The Student's t-test showed no difference between the test results. The common positive point noted was the presence of multimedia content. The web group cited as positive the ability to review the pages, and the other one the role of the teacher. Web-based bronchoscopy education showed results similar to the traditional live lecture in effectiveness.

  11. Quantification methods of Black Carbon: Comparison of Rock-Eval analysis with traditional methods

    NARCIS (Netherlands)

    Poot, A.; Quik, J.T.K.; Veld, H.; Koelmans, A.A.

    2009-01-01

    Black Carbon (BC) quantification methods are reviewed, including new Rock-Eval 6 data on BC reference materials. BC has been reported to have major impacts on climate, human health and environmental quality. Especially for risk assessment of persistent organic pollutants (POPs) it is important to

  12. Study on the traditional pattern retrieval method of minorities in Gansu province

    Science.gov (United States)

    Zheng, Gang; Wang, Beizhan; Sun, Yuchun; Xu, Jin

    2018-03-01

    The traditional patterns of ethnic minorities in gansu province are ethnic arts with strong ethnic characteristics. It is the crystallization of the hard work and wisdom of minority nationalities in gansu province. Unique traditional patterns of ethnic minorities in Gansu province with rich ethnic folk arts, is the crystallization of geographical environment in Gansu minority diligence and wisdom. By using the Surf feature point identification algorithm, the feature point extractor in OpenCV is used to extract the feature points. And the feature points are applied to compare the pattern features to find patterns similar to the artistic features. The application of this method can quickly or efficiently extract pattern information in a database.

  13. Method Usage in Design : How methods function as mental tools for designers

    NARCIS (Netherlands)

    Daalhuizen, J.J.

    2014-01-01

    Methods are means to help designers achieve desired change as efficiently and effectively as possible. Methods can be used to do so in the context of learning - to help teach students how to design on a professional level. Methods can also be used in the context of performance - to help designers

  14. Phenomenological Research Method, Design and Procedure: A ...

    African Journals Online (AJOL)

    Phenomenological Research Method, Design and Procedure: A Phenomenological Investigation of the Phenomenon of Being-in-Community as Experienced by Two Individuals Who Have Participated in a Community Building Workshop.

  15. Soft-tissues Image Processing: Comparison of Traditional Segmentation Methods with 2D active Contour Methods

    Czech Academy of Sciences Publication Activity Database

    Mikulka, J.; Gescheidtová, E.; Bartušek, Karel

    2012-01-01

    Roč. 12, č. 4 (2012), s. 153-161 ISSN 1335-8871 R&D Projects: GA ČR GAP102/11/0318; GA ČR GAP102/12/1104; GA MŠk ED0017/01/01 Institutional support: RVO:68081731 Keywords : Medical image processing * image segmentation * liver tumor * temporomandibular joint disc * watershed method Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.233, year: 2012

  16. Evaluating the Effectiveness of Traditional Training Methods in Non-Traditional Training Programs for Adult Learners through a Pre-Test/Post-Test Comparison of Food Safety Knowledge

    Science.gov (United States)

    Dodd, Caleb D.; Burris, Scott; Fraze, Steve; Doerfert, David; McCulloch, Abigail

    2013-01-01

    The incorporation of hot and cold food bars into grocery stores in an effort to capture a portion of the home meal replacement industry is presenting new challenges for retail food establishments. To ensure retail success and customer safety, employees need to be educated in food safety practices. Traditional methods of training are not meeting…

  17. Development of New Bituminous Pavement Design Method

    DEFF Research Database (Denmark)

    Ullidtz, Per

    The report and work of COST Action 333 sets in place the foundation for a coherent, cost-effective and harmonised European pavement design method. In order to do this, the work programme focused on information gathering, identification of requirements and the selection of the necessary design...

  18. Revision of South African pavement design method

    CSIR Research Space (South Africa)

    Kannemeyer, L

    2015-08-01

    Full Text Available an improved mechanistic-empirical design method has been developed, based on the latest available local and international research and design trends. The process followed during revision as well as some of the key outcomes of this process are presented...

  19. Comparing early design methods for children

    NARCIS (Netherlands)

    Sluis - Thiescheffer, R.J.W.; Bekker, M.M.; Eggen, J.H.; Robertson, J.; Skov, M.B.; Bekker, M.M.

    2007-01-01

    This paper describes a study which compares the outcome of two early design methods for children: brainstorming and prototyping. The hypothesis is that children will uncover more design ideas when prototyping than when brainstorming, because prototyping requires the use of a wider range of

  20. Mixed Methods Research Designs in Counseling Psychology

    Science.gov (United States)

    Hanson, William E.; Creswell, John W.; Clark, Vicki L. Plano; Petska, Kelly S.; Creswell, David J.

    2005-01-01

    With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods…

  1. Design methods in solid rocket motors

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    A compilation of lectures summarizing the current state-of-the-art in designing solid rocket motors and and their components is presented. The experience of several countries in the use of new technologies and methods is represented. Specific sessions address propellant grains, cases, nozzles, internal thermal insulation, and the general optimization of solid rocket motor designs.

  2. Concurrent semantics for structured design methods

    OpenAIRE

    Nixon, Patrick

    1996-01-01

    Also in Jelly, I., Gordon, I., & Groll, P. Software Engineering for Parallel and Distributed Systems. London: Chapman Hall. Design methods can be ambiguous due to di#11;erent interpretations of symbols or concepts. This paper presents a formal semantics for the Ward/Mellor Structured Analysis Method for Real Time systems. These semantics ensures that an unambiguous meaning can be attributed to a particular design. Speci#12;cally, it ensures that concurrent and real-time propert...

  3. Shoulder girdle muscle activity and fatigue in traditional and improved design carpet weaving workstations.

    Science.gov (United States)

    Allahyari, Teimour; Mortazavi, Narges; Khalkhali, Hamid Reza; Sanjari, Mohammad Ali

    2016-01-01

    Work-related musculoskeletal disorders in the neck and shoulder regions are common among carpet weavers. Working for prolonged hours in a static and awkward posture could result in an increased muscle activity and may lead to musculoskeletal disorders. Ergonomic workstation improvements can reduce muscle fatigue and the risk of musculoskeletal disorders. The aim of this study is to assess and to compare upper trapezius and middle deltoid muscle activity in 2 traditional and improved design carpet weaving workstations. These 2 workstations were simulated in a laboratory and 12 women carpet weavers worked for 3 h. Electromyography (EMG) signals were recorded during work in bilateral upper trapezius and bilateral middle deltoid. The root mean square (RMS) and median frequency (MF) values were calculated and used to assess muscle load and fatigue. Repeated measure ANOVA was performed to assess the effect of independent variables on muscular activity and fatigue. The participants were asked to report shoulder region fatigue on the Borg's Category-Ratio scale (Borg CR-10). Root mean square values in workstation A are significantly higher than in workstation B. Furthermore, EMG amplitude was higher in bilateral trapezius than in bilateral deltoid. However, muscle fatigue was not observed in any of the workstations. The results of the study revealed that muscle load in a traditional workstation was high, but fatigue was not observed. Further studies investigating other muscles involved in carpet weaving tasks are recommended. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  4. Traditional and robust vector selection methods for use with similarity based models

    International Nuclear Information System (INIS)

    Hines, J. W.; Garvey, D. R.

    2006-01-01

    Vector selection, or instance selection as it is often called in the data mining literature, performs a critical task in the development of nonparametric, similarity based models. Nonparametric, similarity based modeling (SBM) is a form of 'lazy learning' which constructs a local model 'on the fly' by comparing a query vector to historical, training vectors. For large training sets the creation of local models may become cumbersome, since each training vector must be compared to the query vector. To alleviate this computational burden, varying forms of training vector sampling may be employed with the goal of selecting a subset of the training data such that the samples are representative of the underlying process. This paper describes one such SBM, namely auto-associative kernel regression (AAKR), and presents five traditional vector selection methods and one robust vector selection method that may be used to select prototype vectors from a larger data set in model training. The five traditional vector selection methods considered are min-max, vector ordering, combination min-max and vector ordering, fuzzy c-means clustering, and Adeli-Hung clustering. Each method is described in detail and compared using artificially generated data and data collected from the steam system of an operating nuclear power plant. (authors)

  5. Quality evaluation of fish and other seafood by traditional and nondestructive instrumental methods: Advantages and limitations.

    Science.gov (United States)

    Hassoun, Abdo; Karoui, Romdhane

    2017-06-13

    Although being one of the most vulnerable and perishable products, fish and other seafoods provide a wide range of health-promoting compounds. Recently, the growing interest of consumers in food quality and safety issues has contributed to the increasing demand for sensitive and rapid analytical technologies. Several traditional physicochemical, textural, sensory, and electrical methods have been used to evaluate freshness and authentication of fish and other seafood products. Despite the importance of these standard methods, they are expensive and time-consuming, and often susceptible to large sources of variation. Recently, spectroscopic methods and other emerging techniques have shown great potential due to speed of analysis, minimal sample preparation, high repeatability, low cost, and, most of all, the fact that these techniques are noninvasive and nondestructive and, therefore, could be applied to any online monitoring system. This review describes firstly and briefly the basic principles of multivariate data analysis, followed by the most commonly traditional methods used for the determination of the freshness and authenticity of fish and other seafood products. A special focus is put on the use of rapid and nondestructive techniques (spectroscopic techniques and instrumental sensors) to address several issues related to the quality of these products. Moreover, the advantages and limitations of each technique are reviewed and some perspectives are also given.

  6. Mechatronic Systems Design Methods, Models, Concepts

    CERN Document Server

    Janschek, Klaus

    2012-01-01

    In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of th...

  7. Specially designed B4C/SnO2 nanocomposite for photocatalysis: traditional ceramic with unique properties

    Science.gov (United States)

    Singh, Paviter; Kaur, Gurpreet; Singh, Kulwinder; Singh, Bikramjeet; Kaur, Manpreet; Kaur, Manjot; Krishnan, Unni; Kumar, Manjeet; Bala, Rajni; Kumar, Akshay

    2018-02-01

    Boron carbide: A traditional ceramic material shows unique properties when explored in nano-range. Specially designed boron-based nanocomposite has been synthesized by reflux method. The addition of SnO2 in base matrix increases the defect states in boron carbide and shows unique catalytic properties. The calculated texture coefficient and Nelson-Riley factor show that the synthesized nanocomposite has large number of defect states. Also this composite is explored for the first time for catalysis degradation of industrial used dyes. The degradation analysis of industrial pollutants such as Novacron red Huntsman (NRH) and methylene blue (MB) dye reveals that the composite is an efficient catalyst. Degradation study shows that 1 g/L catalyst concentration of B4C/SnO2 degrades NRH and MB dye up to approximately 97.38 and 79.41%, respectively, in 20 min under sunlight irradiation. This water-insoluble catalyst can be recovered and reused.

  8. Learning physics: A comparative analysis between instructional design methods

    Science.gov (United States)

    Mathew, Easow

    The purpose of this research was to determine if there were differences in academic performance between students who participated in traditional versus collaborative problem-based learning (PBL) instructional design approaches to physics curricula. This study utilized a quantitative quasi-experimental design methodology to determine the significance of differences in pre- and posttest introductory physics exam performance between students who participated in traditional (i.e., control group) versus collaborative problem solving (PBL) instructional design (i.e., experimental group) approaches to physics curricula over a college semester in 2008. There were 42 student participants (N = 42) enrolled in an introductory physics course at the research site in the Spring 2008 semester who agreed to participate in this study after reading and signing informed consent documents. A total of 22 participants were assigned to the experimental group (n = 22) who participated in a PBL based teaching methodology along with traditional lecture methods. The other 20 students were assigned to the control group (n = 20) who participated in the traditional lecture teaching methodology. Both the courses were taught by experienced professors who have qualifications at the doctoral level. The results indicated statistically significant differences (p traditional (i.e., lower physics posttest scores and lower differences between pre- and posttest scores) versus collaborative (i.e., higher physics posttest scores, and higher differences between pre- and posttest scores) instructional design approaches to physics curricula. Despite some slight differences in control group and experimental group demographic characteristics (gender, ethnicity, and age) there were statistically significant (p = .04) differences between female average academic improvement which was much higher than male average academic improvement (˜63%) in the control group which may indicate that traditional teaching methods

  9. Traditional Versus Online Biology Courses: Connecting Course Design and Student Learning in an Online Setting.

    Science.gov (United States)

    Biel, Rachel; Brame, Cynthia J

    2016-12-01

    Online courses are a large and growing part of the undergraduate education landscape, but many biology instructors are skeptical about the effectiveness of online instruction. We reviewed studies comparing the effectiveness of online and face-to-face (F2F) undergraduate biology courses. Five studies compared student performance in multiple course sections at community colleges, while eight were smaller scale and compared student performance in particular biology courses at a variety of types of institutions. Of the larger-scale studies, two found that students in F2F sections outperformed students in online sections, and three found no significant difference; it should be noted, however, that these studies reported little information about course design. Of the eight smaller scale studies, six found no significant difference in student performance between the F2F and online sections, while two found that the online sections outperformed the F2F sections. In alignment with general findings about online teaching and learning, these results suggest that well-designed online biology courses can be effective at promoting student learning. Three recommendations for effective online instruction in biology are given: the inclusion of an online orientation to acclimate students to the online classroom; student-instructor and student-student interactions facilitated through synchronous and asynchronous communication; and elements that prompt student reflection and self-assessment. We conclude that well-designed online biology courses can be as effective as their traditional counterparts, but that more research is needed to elucidate specific course elements and structures that can maximize online students' learning of key biology skills and concepts.

  10. Traditional Versus Online Biology Courses: Connecting Course Design and Student Learning in an Online Setting

    Directory of Open Access Journals (Sweden)

    Rachel Biel

    2016-12-01

    Full Text Available Online courses are a large and growing part of the undergraduate education landscape, but many biology instructors are skeptical about the effectiveness of online instruction. We reviewed studies comparing the effectiveness of online and face-to-face (F2F undergraduate biology courses. Five studies compared student performance in multiple course sections at community colleges, while eight were smaller scale and compared student performance in particular biology courses at a variety of types of institutions. Of the larger-scale studies, two found that students in F2F sections outperformed students in online sections, and three found no significant difference; it should be noted, however, that these studies reported little information about course design. Of the eight smaller scale studies, six found no significant difference in student performance between the F2F and online sections, while two found that the online sections outperformed the F2F sections. In alignment with general findings about online teaching and learning, these results suggest that well-designed online biology courses can be effective at promoting student learning. Three recommendations for effective online instruction in biology are given: the inclusion of an online orientation to acclimate students to the online classroom; student-instructor and student-student interactions facilitated through synchronous and asynchronous communication; and elements that prompt student reflection and self-assessment. We conclude that well-designed online biology courses can be as effective as their traditional counterparts, but that more research is needed to elucidate specific course elements and structures that can maximize online students’ learning of key biology skills and concepts.

  11. Neural networks and traditional time series methods: a synergistic combination in state economic forecasts.

    Science.gov (United States)

    Hansen, J V; Nelson, R D

    1997-01-01

    Ever since the initial planning for the 1997 Utah legislative session, neural-network forecasting techniques have provided valuable insights for analysts forecasting tax revenues. These revenue estimates are critically important since agency budgets, support for education, and improvements to infrastructure all depend on their accuracy. Underforecasting generates windfalls that concern taxpayers, whereas overforecasting produces budget shortfalls that cause inadequately funded commitments. The pattern finding ability of neural networks gives insightful and alternative views of the seasonal and cyclical components commonly found in economic time series data. Two applications of neural networks to revenue forecasting clearly demonstrate how these models complement traditional time series techniques. In the first, preoccupation with a potential downturn in the economy distracts analysis based on traditional time series methods so that it overlooks an emerging new phenomenon in the data. In this case, neural networks identify the new pattern that then allows modification of the time series models and finally gives more accurate forecasts. In the second application, data structure found by traditional statistical tools allows analysts to provide neural networks with important information that the networks then use to create more accurate models. In summary, for the Utah revenue outlook, the insights that result from a portfolio of forecasts that includes neural networks exceeds the understanding generated from strictly statistical forecasting techniques. In this case, the synergy clearly results in the whole of the portfolio of forecasts being more accurate than the sum of the individual parts.

  12. Comparison of prosthetic models produced by traditional and additive manufacturing methods.

    Science.gov (United States)

    Park, Jin-Young; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Jae-Hong; Kim, Woong-Chul

    2015-08-01

    The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (α=.05). The mean marginal gaps and internal gaps showed significant differences according to tooth type (Pmanufacturing method (Pmanufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

  13. Coconut oil extraction by the traditional Java method : An investigation of its potential application in aqueous Jatropha oil extraction

    NARCIS (Netherlands)

    Marasabessy, Ahmad; Moeis, Maelita R.; Sanders, Johan P. M.; Weusthuis, Ruud A.

    A traditional Java method of coconut oil extraction assisted by paddy crabs was investigated to find out if crabs or crab-derived components can be used to extract oil from Jatropha curcas seed kernels. Using the traditional Java method the addition of crab paste liberated 54% w w(-1) oil from

  14. Problem Solving Methods in Engineering Design

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1999-01-01

    This short paper discusses typical engineering tasks and problem solving methods, based on a field study of engineering tasks at a Danish engineering firm. The field study has identified ten classes of design tasks and in this paper these classes are related to problem solving methods. The descri...

  15. Combining traditional dietary assessment methods with novel metabolomics techniques: present efforts by the Food Biomarker Alliance

    DEFF Research Database (Denmark)

    Brouwer-Brolsma, Elske M; Brennan, Lorraine; Drevon, Christian A

    2017-01-01

    food metabolomics techniques that allow the quantification of up to thousands of metabolites simultaneously, which may be applied in intervention and observational studies. As biomarkers are often influenced by various other factors than the food under investigation, FoodBAll developed a food intake...... in these metabolomics studies, knowledge about available electronic metabolomics resources is necessary and further developments of these resources are essential. Ultimately, present efforts in this research area aim to advance quality control of traditional dietary assessment methods, advance compliance evaluation...

  16. Panel presentation: Should some type of incentive regulation replace traditional methods for LDC's?

    International Nuclear Information System (INIS)

    Richard, O.G.

    1992-01-01

    This paper discusses the problems with existing fixed-rate price regulation and how a deregulation of both the pipeline and gas utility companies are needed to enhance competition. The paper suggests alternative methods to traditional regulation which include a financial incentive package which allows or encourages utilities to make investments in more efficient energy management, to improve load factors to balance the energy demands between industrial and residential users, and reward purchases of gas supplies that out-perform an agreed upon level of rates of a cost index. Other incentive programs are proposed by the author with a relative detailed discussion on each topic

  17. Assessing Health Promotion Interventions: Limitations of Traditional Research Methods in Community-Based Studies.

    Science.gov (United States)

    Dressel, Anne; Schneider, Robert; DeNomie, Melissa; Kusch, Jennifer; Welch, Whitney; Sosa, Mirtha; Yeldell, Sally; Maida, Tatiana; Wineberg, Jessica; Holt, Keith; Bernstein, Rebecca

    2017-09-01

    Most low-income Americans fail to meet physical activity recommendations. Inactivity and poor diet contribute to obesity, a risk factor for multiple chronic diseases. Health promotion activities have the potential to improve health outcomes for low-income populations. Measuring the effectiveness of these activities, however, can be challenging in community settings. A "Biking for Health" study tested the impact of a bicycling intervention on overweight or obese low-income Latino and African American adults to reduce barriers to cycling and increase physical activity and fitness. A randomized controlled trial was conducted in Milwaukee, Wisconsin, in summer 2015. A 12-week bicycling intervention was implemented at two sites with low-income, overweight, or obese Latino and African American adults. We found that randomized controlled trial methodology was suboptimal for use in this small pilot study and that it negatively affected participation. More discussion is needed about the effectiveness of using traditional research methods in community settings to assess the effectiveness of health promotion interventions. Modifications or alternative methods may yield better results. The aim of this article is to discuss the effectiveness and feasibility of using traditional research methods to assess health promotion interventions in community-based settings.

  18. Comparison of the Effects of Cooperative Learning and Traditional Learning Methods on the Improvement of Drug-Dose Calculation Skills of Nursing Students Undergoing Internships

    Science.gov (United States)

    Basak, Tulay; Yildiz, Dilek

    2014-01-01

    Objective: The aim of this study was to compare the effectiveness of cooperative learning and traditional learning methods on the development of drug-calculation skills. Design: Final-year nursing students ("n" = 85) undergoing internships during the 2010-2011 academic year at a nursing school constituted the study group of this…

  19. ITPI: Initial Transcription Process-Based Identification Method of Bioactive Components in Traditional Chinese Medicine Formula

    Directory of Open Access Journals (Sweden)

    Baixia Zhang

    2016-01-01

    Full Text Available Identification of bioactive components is an important area of research in traditional Chinese medicine (TCM formula. The reported identification methods only consider the interaction between the components and the target proteins, which is not sufficient to explain the influence of TCM on the gene expression. Here, we propose the Initial Transcription Process-based Identification (ITPI method for the discovery of bioactive components that influence transcription factors (TFs. In this method, genome-wide chip detection technology was used to identify differentially expressed genes (DEGs. The TFs of DEGs were derived from GeneCards. The components influencing the TFs were derived from STITCH. The bioactive components in the formula were identified by evaluating the molecular similarity between the components in formula and the components that influence the TF of DEGs. Using the formula of Tian-Zhu-San (TZS as an example, the reliability and limitation of ITPI were examined and 16 bioactive components that influence TFs were identified.

  20. Monte Carlo methods for shield design calculations

    International Nuclear Information System (INIS)

    Grimstone, M.J.

    1974-01-01

    A suite of Monte Carlo codes is being developed for use on a routine basis in commercial reactor shield design. The methods adopted for this purpose include the modular construction of codes, simplified geometries, automatic variance reduction techniques, continuous energy treatment of cross section data, and albedo methods for streaming. Descriptions are given of the implementation of these methods and of their use in practical calculations. 26 references. (U.S.)

  1. Design of Glucagon-Like Peptide-1 Receptor Agonist for Diabetes Mellitus from Traditional Chinese Medicine

    Directory of Open Access Journals (Sweden)

    Hsin-Chieh Tang

    2014-01-01

    Full Text Available Glucagon-like peptide-1 (GLP-1 is a promising target for diabetes mellitus (DM therapy and reduces the occurrence of diabetes due to obesity. However, GLP-1 will be hydrolyzed soon by the enzyme dipeptidyl peptidase-4 (DPP-4. We tried to design small molecular drugs for GLP-1 receptor agonist from the world's largest traditional Chinese medicine (TCM Database@Taiwan. According to docking results of virtual screening, we selected 2 TCM compounds, wenyujinoside and 28-deglucosylchikusetsusaponin IV, for further molecular dynamics (MD simulation. GLP-1 was assigned as the control compound. Based on the results of root mean square deviation (RMSD, solvent accessible surface (SAS, mean square deviation (MSD, Gyrate, total energy, root mean square fluctuation (RMSF, matrices of smallest distance of residues, database of secondary structure assignment (DSSP, cluster analysis, and distance of H-bond, we concluded that all the 3 compounds could bind and activate GLP-1 receptor by computational simulation. Wenyujinoside and 28-deglucosylchikusetsusaponin IV were the TCM compounds that could be GLP-1 receptor agonists.

  2. Landscape design strategies for post-disaster reconstructions based on traditional ethical wisdom

    Science.gov (United States)

    Yi, Shouli; Hu, Di; Gao, Suping; Lei, Ting; Chen, Qibin

    2018-03-01

    In the face of the black swan events which frequently happened globally, I take the earthquake of Ya'an, happened at 4.20 in Sichuan, as an example of my subject. The results indicate that the social responsibility of landscape architects is a post-disaster reconstruction of a material and spiritual homeland for victims and mental care for individuals, which specifically reflected in the process of rebuilding victims' sense of security. The reconstruction of a sense of security must follow certain ethics and moralities which embody the ecological wisdom. We take a typical case of Ya'an Lushan Snow Mountain Village-the earthquake distress area, we found the incidence of disease was up to 68.6% through the PTSD analysis, indicating the overall absence of a sense of security. To solve the problem and reconstruct people's mental and material homeland, the article discussed the strategies and solutions to post-disaster landscape design based on traditional ethical wisdom.

  3. Analytical techniques for instrument design - Matrix methods

    International Nuclear Information System (INIS)

    Robinson, R.A.

    1997-01-01

    The authors take the traditional Cooper-Nathans approach, as has been applied for many years for steady-state triple-axis spectrometers, and consider its generalization to other inelastic scattering spectrometers. This involves a number of simple manipulations of exponentials of quadratic forms. In particular, they discuss a toolbox of matrix manipulations that can be performed on the 6-dimensional Cooper-Nathans matrix. They show how these tools can be combined to solve a number of important problems, within the narrow-band limit and the gaussian approximation. They will argue that a generalized program that can handle multiple different spectrometers could (and should) be written in parallel to the Monte-Carlo packages that are becoming available. They also discuss the complementarity between detailed Monte-Carlo calculations and the approach presented here. In particular, Monte-Carlo methods traditionally simulate the real experiment as performed in practice, given a model scattering law, while the Cooper-Nathans method asks the inverse question: given that a neutron turns up in a particular spectrometer configuration (e.g. angle and time of flight), what is the probability distribution of possible scattering events at the sample? The Monte-Carlo approach could be applied in the same spirit to this question

  4. Breaking from binaries - using a sequential mixed methods design.

    Science.gov (United States)

    Larkin, Patricia Mary; Begley, Cecily Marion; Devane, Declan

    2014-03-01

    To outline the traditional worldviews of healthcare research and discuss the benefits and challenges of using mixed methods approaches in contributing to the development of nursing and midwifery knowledge. There has been much debate about the contribution of mixed methods research to nursing and midwifery knowledge in recent years. A sequential exploratory design is used as an exemplar of a mixed methods approach. The study discussed used a combination of focus-group interviews and a quantitative instrument to obtain a fuller understanding of women's experiences of childbirth. In the mixed methods study example, qualitative data were analysed using thematic analysis and quantitative data using regression analysis. Polarised debates about the veracity, philosophical integrity and motivation for conducting mixed methods research have largely abated. A mixed methods approach can contribute to a deeper, more contextual understanding of a variety of subjects and experiences; as a result, it furthers knowledge that can be used in clinical practice. The purpose of the research study should be the main instigator when choosing from an array of mixed methods research designs. Mixed methods research offers a variety of models that can augment investigative capabilities and provide richer data than can a discrete method alone. This paper offers an example of an exploratory, sequential approach to investigating women's childbirth experiences. A clear framework for the conduct and integration of the different phases of the mixed methods research process is provided. This approach can be used by practitioners and policy makers to improve practice.

  5. Novel Methods for Electromagnetic Simulation and Design

    Science.gov (United States)

    2016-08-03

    modeling software that can handle complicated, electrically large objects in a manner that is sufficiently fast to allow design by simulation. 15. SUBJECT...electrically large objects in a manner that is sufficiently fast to allow design by simulation. We also developed new methods for scattering from cavities in a...basis for high fidelity modeling software that can handle complicated, electrically large objects in a manner that is sufficiently fast to allow

  6. An experimental detrending approach to attributing change of pan evaporation in comparison with the traditional partial differential method

    Science.gov (United States)

    Wang, Tingting; Sun, Fubao; Xia, Jun; Liu, Wenbin; Sang, Yanfang

    2017-04-01

    In predicting how droughts and hydrological cycles would change in a warming climate, change of atmospheric evaporative demand measured by pan evaporation (Epan) is one crucial element to be understood. Over the last decade, the derived partial differential (PD) form of the PenPan equation is a prevailing attribution approach to attributing changes to Epan worldwide. However, the independency among climatic variables required by the PD approach cannot be met using long term observations. Here we designed a series of numerical experiments to attribute changes of Epan over China by detrending each climatic variable, i.e., an experimental detrending approach, to address the inter-correlation among climate variables, and made comparison with the traditional PD method. The results show that the detrending approach is superior not only to a complicate system with multi-variables and mixing algorithm like aerodynamic component (Ep,A) and Epan, but also to a simple case like radiative component (Ep,R), when compared with traditional PD method. The major reason for this is the strong and significant inter-correlation of input meteorological forcing. Very similar and fine attributing results have been achieved based on detrending approach and PD method after eliminating the inter-correlation of input through a randomize approach. The contribution of Rh and Ta in net radiation and thus Ep,R, which has been overlooked based on the PD method but successfully detected by detrending approach, provides some explanation to the comparing results. We adopted the control run from the detrending approach and applied it to made adjustment of PD method. Much improvement has been made and thus proven this adjustment an effective way in attributing changes to Epan. Hence, the detrending approach and the adjusted PD method are well recommended in attributing changes in hydrological models to better understand and predict water and energy cycle.

  7. Comparative analysis to determine asphalt density and content, using nuclear and traditional methods

    International Nuclear Information System (INIS)

    Margffoy S, F.R.; Robayo S, A.M.

    1989-01-01

    Quality control for flex pavement construction in Colombia for asphaltic mix, as well as for granular and granular sub base layers is made by means of methods that does not guarantee the quality of the job, due to the difficult execution of tests, which impede more to be done or due to inherent problems of the test process. Thanks to the inherent characteristics and advantages of nuclear techniques, those become the optimal alternative to this quality control job. The present research project has been developed with the objective of justifying the use of new technologies applied to road construction; making a comparative analysis between traditional methods used in our country and nuclear techniques that have been using in United States with great success in quality control in road construction

  8. Countermeasures for electrolytic corrosion - Part I: Traditional methods and their problems

    International Nuclear Information System (INIS)

    Ha, Yoon-Cheol; Kim, Dae-Kyeong; Bae, Jeong-Hyo; Ha, Tae-Hyun; Lee, Hyun-Goo

    2004-01-01

    When an underground pipeline runs parallel with DC-powered railways, it suffers from electrolytic corrosion caused by the stray current leaked from the railway negative returns. Perforation due to the electrolytic corrosion may bring about large-scale accidents even in cathodically protected systems. Traditionally, bonding methods such as direct drainage, polarized drainage and forced drainage have been used in order to mitigate the damage on pipelines. In particular, the forced drainage method is widely adopted in Korea. In this paper, we report the real-time measurement data of the pipe-to-soil potential variation in the presence and absence of the IR compensation. The drainage current variation was also measured using the Stray Current Logger developed. By analysing them, the problems of current countermeasures for electrolytic corrosion are discussed. (authors)

  9. Countermeasures for electrolytic corrosion - Part I: Traditional methods and their problems

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Yoon-Cheol; Kim, Dae-Kyeong; Bae, Jeong-Hyo; Ha, Tae-Hyun; Lee, Hyun-Goo [Underground Systems Group, Korea Electrotechnology Research Institute, 28-1 Sungju-dong, Changwon (Korea, Republic of)

    2004-07-01

    When an underground pipeline runs parallel with DC-powered railways, it suffers from electrolytic corrosion caused by the stray current leaked from the railway negative returns. Perforation due to the electrolytic corrosion may bring about large-scale accidents even in cathodically protected systems. Traditionally, bonding methods such as direct drainage, polarized drainage and forced drainage have been used in order to mitigate the damage on pipelines. In particular, the forced drainage method is widely adopted in Korea. In this paper, we report the real-time measurement data of the pipe-to-soil potential variation in the presence and absence of the IR compensation. The drainage current variation was also measured using the Stray Current Logger developed. By analysing them, the problems of current countermeasures for electrolytic corrosion are discussed. (authors)

  10. Bioassessment of a Drinking Water Reservoir Using Plankton: High Throughput Sequencing vs. Traditional Morphological Method

    Directory of Open Access Journals (Sweden)

    Wanli Gao

    2018-01-01

    Full Text Available Drinking water safety is increasingly perceived as one of the top global environmental issues. Plankton has been commonly used as a bioindicator for water quality in lakes and reservoirs. Recently, DNA sequencing technology has been applied to bioassessment. In this study, we compared the effectiveness of the 16S and 18S rRNA high throughput sequencing method (HTS and the traditional optical microscopy method (TOM in the bioassessment of drinking water quality. Five stations reflecting different habitats and hydrological conditions in Danjiangkou Reservoir, one of the largest drinking water reservoirs in Asia, were sampled May 2016. Non-metric multi-dimensional scaling (NMDS analysis showed that plankton assemblages varied among the stations and the spatial patterns revealed by the two methods were consistent. The correlation between TOM and HTS in a symmetric Procrustes analysis was 0.61, revealing overall good concordance between the two methods. Procrustes analysis also showed that site-specific differences between the two methods varied among the stations. Station Heijizui (H, a site heavily influenced by two tributaries, had the largest difference while station Qushou (Q, a confluence site close to the outlet dam, had the smallest difference between the two methods. Our results show that DNA sequencing has the potential to provide consistent identification of taxa, and reliable bioassessment in a long-term biomonitoring and assessment program for drinking water reservoirs.

  11. Design of heat exchangers by numerical methods

    International Nuclear Information System (INIS)

    Konuk, A.A.

    1981-01-01

    Differential equations describing the heat tranfer in shell - and tube heat exchangers are derived and solved numerically. The method of ΔT sub(lm) is compared with the proposed method in cases where the specific heat at constant pressure, Cp and the overall heat transfer coefficient, U, vary with temperature. The error of the method of ΔT sub (lm) for the computation of the exchanger lenght is less than + 10%. However, the numerical method, being more accurate and at the same time easy to use and economical, is recommended for the design of shell-and-tube heat exchangers. (Author) [pt

  12. A comparison of two prospective risk analysis methods: Traditional FMEA and a modified healthcare FMEA.

    Science.gov (United States)

    Rah, Jeong-Eun; Manger, Ryan P; Yock, Adam D; Kim, Gwe-Ya

    2016-12-01

    To examine the abilities of a traditional failure mode and effects analysis (FMEA) and modified healthcare FMEA (m-HFMEA) scoring methods by comparing the degree of congruence in identifying high risk failures. The authors applied two prospective methods of the quality management to surface image guided, linac-based radiosurgery (SIG-RS). For the traditional FMEA, decisions on how to improve an operation were based on the risk priority number (RPN). The RPN is a product of three indices: occurrence, severity, and detectability. The m-HFMEA approach utilized two indices, severity and frequency. A risk inventory matrix was divided into four categories: very low, low, high, and very high. For high risk events, an additional evaluation was performed. Based upon the criticality of the process, it was decided if additional safety measures were needed and what they comprise. The two methods were independently compared to determine if the results and rated risks matched. The authors' results showed an agreement of 85% between FMEA and m-HFMEA approaches for top 20 risks of SIG-RS-specific failure modes. The main differences between the two approaches were the distribution of the values and the observation that failure modes (52, 54, 154) with high m-HFMEA scores do not necessarily have high FMEA-RPN scores. In the m-HFMEA analysis, when the risk score is determined, the basis of the established HFMEA Decision Tree™ or the failure mode should be more thoroughly investigated. m-HFMEA is inductive because it requires the identification of the consequences from causes, and semi-quantitative since it allows the prioritization of high risks and mitigation measures. It is therefore a useful tool for the prospective risk analysis method to radiotherapy.

  13. Comparison of Satellite Surveying to Traditional Surveying Methods for the Resources Industry

    Science.gov (United States)

    Osborne, B. P.; Osborne, V. J.; Kruger, M. L.

    Modern ground-based survey methods involve detailed survey, which provides three-space co-ordinates for surveyed points, to a high level of accuracy. The instruments are operated by surveyors, who process the raw results to create survey location maps for the subject of the survey. Such surveys are conducted for a location or region and referenced to the earth global co- ordinate system with global positioning system (GPS) positioning. Due to this referencing the survey is only as accurate as the GPS reference system. Satellite survey remote sensing utilise satellite imagery which have been processed using commercial geographic information system software. Three-space co-ordinate maps are generated, with an accuracy determined by the datum position accuracy and optical resolution of the satellite platform.This paper presents a case study, which compares topographic surveying undertaken by traditional survey methods with satellite surveying, for the same location. The purpose of this study is to assess the viability of satellite remote sensing for surveying in the resources industry. The case study involves a topographic survey of a dune field for a prospective mining project area in Pakistan. This site has been surveyed using modern surveying techniques and the results are compared to a satellite survey performed on the same area.Analysis of the results from traditional survey and from the satellite survey involved a comparison of the derived spatial co- ordinates from each method. In addition, comparisons have been made of costs and turnaround time for both methods.The results of this application of remote sensing is of particular interest for survey in areas with remote and extreme environments, weather extremes, political unrest, poor travel links, which are commonly associated with mining projects. Such areas frequently suffer language barriers, poor onsite technical support and resources.

  14. Optimization methods applied to hybrid vehicle design

    Science.gov (United States)

    Donoghue, J. F.; Burghart, J. H.

    1983-01-01

    The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

  15. Addressing Research Design Problem in Mixed Methods Research

    Science.gov (United States)

    Alavi, Hamed; Hąbek, Patrycja

    2016-03-01

    Alongside other disciplines in social sciences, management researchers use mixed methods research more and more in conduct of their scientific investigations. Mixed methods approach can also be used in the field of production engineering. In comparison with traditional quantitative and qualitative research methods, reasons behind increasing popularity of mixed research method in management science can be traced in different factors. First of all, any particular discipline in management can be theoretically related to it. Second is that concurrent approach of mixed research method to inductive and deductive research logic provides researchers with opportunity to generate theory and test hypothesis in one study simultaneously. In addition, it provides a better justification for chosen method of investigation and higher validity for obtained answers to research questions. Despite increasing popularity of mixed research methods among management scholars, there is still need for a comprehensive approach to research design typology and process in mixed research method from the perspective of management science. The authors in this paper try to explain fundamental principles of mixed research method, its typology and different steps in its design process.

  16. Analytical techniques for instrument design - matrix methods

    International Nuclear Information System (INIS)

    Robinson, R.A.

    1997-01-01

    We take the traditional Cooper-Nathans approach, as has been applied for many years for steady-state triple-axis spectrometers, and consider its generalisation to other inelastic scattering spectrometers. This involves a number of simple manipulations of exponentials of quadratic forms. In particular, we discuss a toolbox of matrix manipulations that can be performed on the 6- dimensional Cooper-Nathans matrix: diagonalisation (Moller-Nielsen method), coordinate changes e.g. from (Δk I ,Δk F to ΔE, ΔQ ampersand 2 dummy variables), integration of one or more variables (e.g. over such dummy variables), integration subject to linear constraints (e.g. Bragg's Law for analysers), inversion to give the variance-covariance matrix, and so on. We show how these tools can be combined to solve a number of important problems, within the narrow-band limit and the gaussian approximation. We will argue that a generalised program that can handle multiple different spectrometers could (and should) be written in parallel to the Monte-Carlo packages that are becoming available. We will also discuss the complementarity between detailed Monte-Carlo calculations and the approach presented here. In particular, Monte-Carlo methods traditionally simulate the real experiment as performed in practice, given a model scattering law, while the Cooper-Nathans method asks the inverse question: given that a neutron turns up in a particular spectrometer configuration (e.g. angle and time of flight), what is the probability distribution of possible scattering events at the sample? The Monte-Carlo approach could be applied in the same spirit to this question

  17. MOSQUE WITHOUT DOME: CONSERVING TRADITIONAL-DESIGNED MOSQUE IN MELAKA, MALAYSIA

    Directory of Open Access Journals (Sweden)

    Roslan B. Thalib, M. Zailan Sulieman

    2012-04-01

    Full Text Available Jasin is one of the area in the state of Malacca in Malaysia, known for its long winding history. Located in the middle seat of government of the Empire of the famous Melaka Sultanate, Jasin district does have a number of quality historic buildings. One of the old buildings found in one the villages located quite close to the town of Jasin is the unique domeless Air Barok Village Mosque. Its location is situated along the main road, easy to reach. In a study stated in this paper, it  shows how the unique architecture of this mosque of Air Baroque Village can be appreciated. This paper presents a study of the design elements and architectural features that are unique to the mosque around this region. This paper stated on the approach in creating this structure is different compared to most of the existing mosque currently and previously being built around the state. The concept of neo-archipelago idea to have the Chinese Buddha features in a Muslim mosque was unique found on this religious building located at the side of the world. Expectations for this study to reveal the noble efforts of the Government bodies involved in restoring old  buildings such as this mosque can indirectly maintain the cultural arts of the local Malays who are the largest race in Malaysia. Efforts should also be given to maintain old buildings; not only religious buildings but also other building types; in the effort to ensure local arts and culture still exist and can be appreciated by future generations.   Keywords: Traditional mosque, conservation, mosque history, Melaka mosque

  18. Product-service system method to measure sustainability level of traditional smoked fish processing industries

    Directory of Open Access Journals (Sweden)

    Purwaningsih Ratna

    2018-01-01

    Full Text Available Small Medium Enterprise’s (SME of traditional fish processing at Semarang, Central Java, Indonesia still focus their business on gain more profits. Sustainability aspect has not received enough attention yet. This study aims to review the sustainability level of SME smoked fish Semarang using product service system (PSS method. PSS consists of three dimensions (1 Environment, (2 Socio-cultural and (3 Economic. Each dimension consists of 6 criteria's. PSS not only assess the level of sustainability but also formulated the recommendation to increase the industries sustainability level. Sustainability assessment and recommendations formulation is guided by a check-list form. Then, the portfolio diagram used to select these recommendations according to its feasibility to be implemented and its importance for the industries. The result of sustainability assessment for traditional fish processing is 0.44, categorized as medium level. The recommendations for the environmental dimension are (1 use of liquid smoke on fish processing and (2 use of wastewater treatment with anaerobic ponds Recommendation for the socio-cultural dimension is use personal protective tool to reduce worker risk on safety and health. Recommendation for the economic dimension is used social media for product marketing and increasing the economic value of fish lung wastes. Recommendations are then illustrated in a diagram in the form of radar sustainability.

  19. A Simple Method for High-Lift Propeller Conceptual Design

    Science.gov (United States)

    Patterson, Michael; Borer, Nick; German, Brian

    2016-01-01

    In this paper, we present a simple method for designing propellers that are placed upstream of the leading edge of a wing in order to augment lift. Because the primary purpose of these "high-lift propellers" is to increase lift rather than produce thrust, these props are best viewed as a form of high-lift device; consequently, they should be designed differently than traditional propellers. We present a theory that describes how these props can be designed to provide a relatively uniform axial velocity increase, which is hypothesized to be advantageous for lift augmentation based on a literature survey. Computational modeling indicates that such propellers can generate the same average induced axial velocity while consuming less power and producing less thrust than conventional propeller designs. For an example problem based on specifications for NASA's Scalable Convergent Electric Propulsion Technology and Operations Research (SCEPTOR) flight demonstrator, a propeller designed with the new method requires approximately 15% less power and produces approximately 11% less thrust than one designed for minimum induced loss. Higher-order modeling and/or wind tunnel testing are needed to verify the predicted performance.

  20. Financial methods for waterflooding injectate design

    Science.gov (United States)

    Heneman, Helmuth J.; Brady, Patrick V.

    2017-08-08

    A method of selecting an injectate for recovering liquid hydrocarbons from a reservoir includes designing a plurality of injectates, calculating a net present value of each injectate, and selecting a candidate injectate based on the net present value. For example, the candidate injectate may be selected to maximize the net present value of a waterflooding operation.

  1. Design Methods for Young Sustainable Architecture Practice

    NARCIS (Netherlands)

    Jauslin, D.; Drexler, H.; Curiel, F.

    2012-01-01

    This paper introduces landscape aesthetics as an innovative design method for sustainable architecture. It is based on the framework of a recent paper where the young and unfamous authors criticized three of the most prominent? architects today in regard to sustainable architecture and its

  2. Airfoils and method for designing airfoils

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to airfoils and design and design optimization of airfoils, in particular airfoils of rotor blades for wind turbines. One aspect of the invention relates to an airfoil with an external shape provided by an airfoil profile defined by a limited number of parameters......, such as a set of parameters. Another aspect of the invention relates to a method for designing an airfoil by means of an analytical airfoil profile, said method comprising the step of applying a conformal mapping to a near circle in a near circle plane, wherein the near circle is at least partly expressed...... by means of an analytical function, said conformal mapping transforming the near circle in the near circle plane to the airfoil profile in an airfoil plane. L...

  3. New trends in reactor physics design methods

    International Nuclear Information System (INIS)

    Jagannathan, V.

    1993-01-01

    Reactor physics design methods are aimed at safe and efficient management of nuclear materials in a reactor core. The design methodologies require a high level of integration of different calculational modules of many a key areas like neutronics, thermal hydraulics, radiation transport etc in order to follow different 3-D phenomena under normal and transient operating conditions. The evolution of computer hardware technology is far more rapid than the software development and has rendered such integration a meaningful and realizable proposition. The aim of this paper is to assess the state of art of the physics design codes used in Indian thermal power reactor applications with respect to meeting the design, operational and safety requirements. (author). 50 refs

  4. Color electron microprobe cathodoluminescence of Bishunpur meteorite compared with the traditional optical microscopy method

    Directory of Open Access Journals (Sweden)

    Amanda Araujo Tosi

    Full Text Available Abstract Cathodoluminescence (CL imaging is an outstanding method for sub classification of Unequilibrated Ordinary Chondrites (UOC - petrological type 3. CL can be obtained by several electron beam apparatuses. The traditional method uses an electron gun coupled to an optical microscope (OM. Although many scanning electron microscopes (SEM and electron microprobes (EPMA have been equipped with a cathodoluminescence, this technique was not fully explored. Images obtained by the two methods differ due to a different kind of signal acquisition. While in the CL-OM optical photography true colors are obtained, in the CL-EPMA the results are grayscale monochromatic electronic signals. L-RGB filters were used in the CL-EPMA analysis in order to obtain color data. The aim of this work is to compare cathodoluminescence data obtained from both techniques, optical microscope and electron microprobe, on the Bishunpur meteorite classified as LL 3.1 chondrite. The present study allows concluding that 20 KeV and 7 nA is the best analytical condition at EPMA in order to test the equivalence between CL-EPMA and CL-OM colour results. Moreover, the color index revealed to be a method for aiding the study of the thermal metamorphism, but it is not definitive for the meteorite classification.

  5. Participatory Design Methods for Collaboration and Communication

    Directory of Open Access Journals (Sweden)

    Tara Wood

    2017-01-01

    Full Text Available Website redesigns can be contentious and fraught in any type of organization, and libraries are no exception. Coming to consensus on priorities and design decisions is nearly impossible, as different groups compete to ensure their subject or specialty area is represented. To keep projects on track and on time, libraries may give a few staff members the authority to make all of the decisions, while keeping user research limited to a small number of usability tests. While these tactics are sometimes necessary, at best they can leave many feeling left out of the process, and at worst, can result in major oversights in the final design. Participatory design methods can bring users and stakeholders into the design process and ultimately lead to a better design and less friction in the project. The authors share their experience and lessons learned using participatory design techniques in a website redesign project at a large, multi-location academic library, and how these techniques facilitated communication, shaped design decisions, and kept a complex, difficult project on track.

  6. 3.6 simplified methods for design

    International Nuclear Information System (INIS)

    Nickell, R.E.; Yahr, G.T.

    1981-01-01

    Simplified design analysis methods for elevated temperature construction are classified and reviewed. Because the major impetus for developing elevated temperature design methodology during the past ten years has been the LMFBR program, considerable emphasis is placed upon results from this source. The operating characteristics of the LMFBR are such that cycles of severe transient thermal stresses can be interspersed with normal elevated temperature operational periods of significant duration, leading to a combination of plastic and creep deformation. The various simplified methods are organized into two general categories, depending upon whether it is the material, or constitutive, model that is reduced, or the geometric modeling that is simplified. Because the elastic representation of material behavior is so prevalent, an entire section is devoted to elastic analysis methods. Finally, the validation of the simplified procedures is discussed

  7. The Ornamental Design of Traditional Malay Utensils (Kukuran) in Peninsula Malaysia

    OpenAIRE

    Md Yusoff Zulkfli bin; Md Zain Dzul Haimi bin; Saniman Hamidon bin

    2016-01-01

    Woodcarving is a significant craft in Malay society that reflects the local traditions and customs. It is a manifestation of craftsmen artistic skills and intutitive ideas into a piece of wood. It is also manifestation of the creative process of imitation, denaturalization, stylization and abstraction. Historically, the Malay craftsmen have created many attractive traditional art forms and one of it is the coconut graters (kukuran). The ornamental carved kukuran is closely related to its Mala...

  8. Comparison of traditional methods with 3D computer models in the instruction of hepatobiliary anatomy.

    Science.gov (United States)

    Keedy, Alexander W; Durack, Jeremy C; Sandhu, Parmbir; Chen, Eric M; O'Sullivan, Patricia S; Breiman, Richard S

    2011-01-01

    This study was designed to determine whether an interactive three-dimensional presentation depicting liver and biliary anatomy is more effective for teaching medical students than a traditional textbook format presentation of the same material. Forty-six medical students volunteered for participation in this study. Baseline demographic information, spatial ability, and knowledge of relevant anatomy were measured. Participants were randomized into two groups and presented with a computer-based interactive learning module comprised of animations and still images to highlight various anatomical structures (3D group), or a computer-based text document containing the same images and text without animation or interactive features (2D group). Following each teaching module, students completed a satisfaction survey and nine-item anatomic knowledge post-test. The 3D group scored higher on the post-test than the 2D group, with a mean score of 74% and 64%, respectively; however, when baseline differences in pretest scores were accounted for, this difference was not statistically significant (P = 0.33). Spatial ability did not statistically significantly correlate with post-test scores for the 3D group or the 2D group. In the post-test satisfaction survey the 3D group expressed a statistically significantly higher overall satisfaction rating compared to students in the 2D control group (4.5 versus 3.7 out of 5, P = 0.02). While the interactive 3D multimedia module received higher satisfaction ratings from students, it neither enhanced nor inhibited learning of complex hepatobiliary anatomy compared to an informationally equivalent traditional textbook style approach. . Copyright © 2011 American Association of Anatomists.

  9. Developments of an Interactive Sail Design Method

    OpenAIRE

    S. M. Malpede; M. Vezza

    2000-01-01

    This paper presents a new tool for performing the integrated design and analysis of a sail. The features of the system are the geometrical definition of a sail shape, using the Bezier surface method, the creation of a finite element model for the non-linear structural analysis and a fluid-dynamic model for the aerodynamic analysis. The system has been developed using MATLAB(r). Recent sail design efforts have been focused on solving the aeroelastic behavior of the sail. The pressure dis...

  10. Using BIM Technology to Optimize the Traditional Interior Design Work Mode

    Science.gov (United States)

    Zhu, Ning Ke

    2018-06-01

    the development of BIM technology and application in the field of architecture design has produced results, but BIM technology and application in the field of interior design is still immaturity because of construction and decoration engineering separation. The article analyzes the problems that BIM technology lead to the interior design work mode optimization, from the 3D visualization work environment, real-time collaborative design mode, physical analysis design mode, information integration design mode state the application in interior design.

  11. Volatile profile characterisation of Chilean sparkling wines produced by traditional and Charmat methods via sequential stir bar sorptive extraction.

    Science.gov (United States)

    Ubeda, C; Callejón, R M; Troncoso, A M; Peña-Neira, A; Morales, M L

    2016-09-15

    The volatile compositions of Charmat and traditional Chilean sparkling wines were studied for the first time. For this purpose, EG-Silicone and PDMS polymeric phases were compared and, afterwards, the most adequate was selected. The best extraction method turned out to be a sequential extraction in the headspace and by immersion using two PDMS twisters. A total of 130 compounds were determined. In traditional Chilean sparkling wines, ethyl esters were significantly higher, while acetic esters and ketones were predominant in the Charmat wines. PCA and LDA confirmed the differences in the volatile profiles between the production methods (traditional vs. Charmat). Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. [New method for analyzing pharmacodynamic material basis of traditional Chinese medicines by using specific knockout technology with monoclonal antibodies].

    Science.gov (United States)

    Zhao, Yan; Qu, Hui-Hua; Wang, Qing-Guo

    2013-09-01

    Study on pharmacodynamic material basis of traditional Chinese medicines is one of the key issues for the modernization of traditional Chinese medicine. Having introduced the monoclonal antibody technology into the study on pharmacodynamic material basis of traditional Chinese medicines, the author prepared the immunoaffinity chromatography column by using monoclonal antibodies in active components of traditional Chinese medicines, so as to selectively knock out the component from herbs or traditional Chinese medicine compounds, while preserving all of the other components and keeping their amount and ratio unchanged. A comparative study on pharmacokinetics and pharmacodynamics was made to explicitly reveal the correlation between the component and the main purpose of traditional Chinese medicines and compounds. The analysis on pharmacodynamic material basis of traditional Chinese medicines by using specific knockout technology with monoclonal antibodies is a new method for study pharmacodynamic material basis in line with the characteristics of traditional Chinese medicines. Its results can not only help study material basis from a new perspective, but also help find the modern scientific significance in single herb or among compounds of traditional Chinese medicines.

  13. Design method for fluid viscous dampers

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Jiuhong; Hua, Hongxing [Shanghai Jiaotong University, State Key Laboratory of Mechanical System and Vibration, Shanghai (China); Du, Jianye; Wang, Yu [Naval Arming Academy, Institute of Naval Vessels, Beijing (China)

    2008-09-15

    A basic design method of doubly acting fluid viscous dampers with double guide bars is presented. The flow of the viscoelastic fluid between two parallel plates, one of which is started suddenly and the other of which is still, is analyzed. According to this solution, the velocity and the shear stress of the fluid at the fringe of the piston are solved approximately. A mathematical model of viscous dampers is derived, and the shock test is carried out. From experimental results, the parameters of the mathematical model are determined. Consequently, a semi-empirical design equation is obtained. Applying this equation to a certain practical damper, the damping material is chosen and the physical dimensions of the damper are determined. Shock tests using this damper are performed. Theoretical results are in good agreement with experimental results, which validates the reliability of the calculated physical dimensions of the specimen damper and the validity of the basic design equation. (orig.)

  14. Advance of core design method for ATR

    International Nuclear Information System (INIS)

    Maeda, Seiichirou; Ihara, Toshiteru; Iijima, Takashi; Seino, Hideaki; Kobayashi, Tetsurou; Takeuchi, Michio; Sugawara, Satoru; Matsumoto, Mitsuo.

    1995-01-01

    Core characteristics of ATR demonstration plant has been revised such as increasing the fuel burnup and the channel power, which is achieved by changing the number of fuel rod per fuel assembly from 28 to 36. The research and development concerning the core design method for ATR have been continued. The calculational errors of core analysis code have been evaluated using the operational data of FUGEN and the full scale simulated test results in DCA (Deuterium Critical Assembly) and HTL (Heat Transfer Loop) at O-arai engineering center. It is confirmed that the calculational error of power distribution is smaller than the design value of ATR demonstration plant. Critical heat flux correlation curve for 36 fuel rod cluster has been developed and the probability evaluation method based on its curve, which is more rational to evaluate the fuel dryout, has been adopted. (author)

  15. An Empirical Method for Particle Damping Design

    Directory of Open Access Journals (Sweden)

    Zhi Wei Xu

    2004-01-01

    Full Text Available Particle damping is an effective vibration suppression method. The purpose of this paper is to develop an empirical method for particle damping design based on extensive experiments on three structural objects – steel beam, bond arm and bond head stand. The relationships among several key parameters of structure/particles are obtained. Then the procedures with the use of particle damping are proposed to provide guidelines for practical applications. It is believed that the results presented in this paper would be helpful to effectively implement the particle damping for various structural systems for the purpose of vibration suppression.

  16. Design Methods for Young Sustainable Architecture Practice

    OpenAIRE

    Jauslin, D.; Drexler, H.; Curiel, F.

    2012-01-01

    This paper introduces landscape aesthetics as an innovative design method for sustainable architecture. It is based on the framework of a recent paper where the young and unfamous authors criticized three of the most prominent? architects today in regard to sustainable architecture and its aesthetics. Leading architects expressed their skepticism as to whether there is such a thing as aesthetics in sustainable architecture, or for that matter, if architecture can indeed be sustainable at all....

  17. An experimental method for designing the municipal solid waste biodrying

    International Nuclear Information System (INIS)

    Rada, E.C.; Politecnico Univ., Bucarest; Franzinelli, A.; Taiss, M.; Ragazzi, M.; Panaitescu, V.; Apostol, T.

    2005-01-01

    In the management of Municipal Solid Waste (MSW), in agreement with the new European directives concerning the valorization of materials and energy recovery, a recent approach based on a one-stream Biological Mechanical Treatment (BMT) is spreading as an alternative to the traditional two-stream approach. The bio-mechanical treatment of MSW is an increasing option either as a pre-treatment before land filling or as a pre-treatment before combustion. In the present paper an experimental method for designing the Municipal Solid Waste bio-drying is proposed. That means this paper deals with the option of energy recovery. The aim is to provide design criteria for bio-drying plants independent from the patents available in the sector [it

  18. Utilizing Mass Customization Methods for Modular Manufacturing System Design

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Jacobsen, Alexia; Nielsen, Kjeld

    2011-01-01

    Markets today have become dynamic and demand rapid product changes, product variety, and customized products. In order to operate under and taking advantages of such conditions requires, amongst other aspects, manufacturing processes robust to product changes - a contradiction to traditional...... manufacturing systems developed as dedicated engineer-to-order solutions, tailored to production of a specific product or a limited product assortment. In response, modular manufacturing concepts are evolving, which are aimed at possessing the needed responsiveness and aimed at being the manufacturing paradigm...... of Mass Customization (MC). Research focus has been on the basic principles and enabling technologies, while modular architectures and system design have received less attention. A potential to fill these gaps by applying selected design theories and methods of MC have been seen. Based on a communality...

  19. Comparison of optimal design methods in inverse problems

    International Nuclear Information System (INIS)

    Banks, H T; Holm, K; Kappel, F

    2011-01-01

    Typical optimal design methods for inverse or parameter estimation problems are designed to choose optimal sampling distributions through minimization of a specific cost function related to the resulting error in parameter estimates. It is hoped that the inverse problem will produce parameter estimates with increased accuracy using data collected according to the optimal sampling distribution. Here we formulate the classical optimal design problem in the context of general optimization problems over distributions of sampling times. We present a new Prohorov metric-based theoretical framework that permits one to treat succinctly and rigorously any optimal design criteria based on the Fisher information matrix. A fundamental approximation theory is also included in this framework. A new optimal design, SE-optimal design (standard error optimal design), is then introduced in the context of this framework. We compare this new design criterion with the more traditional D-optimal and E-optimal designs. The optimal sampling distributions from each design are used to compute and compare standard errors; the standard errors for parameters are computed using asymptotic theory or bootstrapping and the optimal mesh. We use three examples to illustrate ideas: the Verhulst–Pearl logistic population model (Banks H T and Tran H T 2009 Mathematical and Experimental Modeling of Physical and Biological Processes (Boca Raton, FL: Chapman and Hall/CRC)), the standard harmonic oscillator model (Banks H T and Tran H T 2009) and a popular glucose regulation model (Bergman R N, Ider Y Z, Bowden C R and Cobelli C 1979 Am. J. Physiol. 236 E667–77; De Gaetano A and Arino O 2000 J. Math. Biol. 40 136–68; Toffolo G, Bergman R N, Finegood D T, Bowden C R and Cobelli C 1980 Diabetes 29 979–90)

  20. Comparison of optimal design methods in inverse problems

    Science.gov (United States)

    Banks, H. T.; Holm, K.; Kappel, F.

    2011-07-01

    Typical optimal design methods for inverse or parameter estimation problems are designed to choose optimal sampling distributions through minimization of a specific cost function related to the resulting error in parameter estimates. It is hoped that the inverse problem will produce parameter estimates with increased accuracy using data collected according to the optimal sampling distribution. Here we formulate the classical optimal design problem in the context of general optimization problems over distributions of sampling times. We present a new Prohorov metric-based theoretical framework that permits one to treat succinctly and rigorously any optimal design criteria based on the Fisher information matrix. A fundamental approximation theory is also included in this framework. A new optimal design, SE-optimal design (standard error optimal design), is then introduced in the context of this framework. We compare this new design criterion with the more traditional D-optimal and E-optimal designs. The optimal sampling distributions from each design are used to compute and compare standard errors; the standard errors for parameters are computed using asymptotic theory or bootstrapping and the optimal mesh. We use three examples to illustrate ideas: the Verhulst-Pearl logistic population model (Banks H T and Tran H T 2009 Mathematical and Experimental Modeling of Physical and Biological Processes (Boca Raton, FL: Chapman and Hall/CRC)), the standard harmonic oscillator model (Banks H T and Tran H T 2009) and a popular glucose regulation model (Bergman R N, Ider Y Z, Bowden C R and Cobelli C 1979 Am. J. Physiol. 236 E667-77 De Gaetano A and Arino O 2000 J. Math. Biol. 40 136-68 Toffolo G, Bergman R N, Finegood D T, Bowden C R and Cobelli C 1980 Diabetes 29 979-90).

  1. [Research on medical speciality of traditional Chinese medicines using dot-immunoblotting method based on polyclonal antibody prepared from traditional Chinese medicines with hot/cold nature].

    Science.gov (United States)

    Wang, Houwei; Dou, Yanling; Tian, Jingzhen; Li, Feng; Wang, Shijun; Wang, Zhenguo

    2009-02-01

    To research on the substantial foundation of the medical speciality of Chinese traditional medicines from immunogenicity. Control antigen with hot nature was prepared from the mixture of the aqueous extracts of three Chinese traditional medicines with three typical hot nature of Alpinia officinarum, Cinnamomum cassia and Curculigo orchioides, while that with cold nature prepared with Rheum palmatum, Anemarrhena asphodeloides, Coptis chinensis, and polyclonal antibody was prepared by immunizing rabbit with control antigen. Dot blotting was performed between the polyclonal antibody of control antigen and the aqueous extracts of nine Chinese traditional medicines on a piece of PVDF membrane, and the blotting signals were analyzed by the software of Quantity One. Blotting signals with hot control antigen of nine Chinese traditional medicines in descending were Zingiber officinale, Aconitum carmichaeli, Eucommia ulmoides, Fraxinus rhynchophylla, Lonicera japonica, Anemarrhena asphodeloides, Coptis chinensis, Rheum palmatum and Phellodendron chinense, which degree of similarity to control antigen in peak value were 57.33%, 43.56 %, 34.16%, 30.2%, 28.81%, 26.53%, 21.68%, 17.62% and 14.85%, respectively. Blotting signals with cold control antigen were Rheum palmatum, Anemarrhena asphodeloides, Coptis chinensis, Phellodendron chinense, Zingiber officinale, Lonicera japonica, Fraxinus rhynchophylla, Eucommia ulmoides and Aconitum carmichaeli in descending, of which degree of similarity to cold control antigen in peak value were 55.22%, 54.23%, 46.72%, 34.08%, 30.3%, 24.48%, 24.33%, 20.35% and 15.17%, respectively. Results of cluster analysis with Wistar's method showed that nine medicines were classified into two groups, one group included Phellodendron chinense, Anemarrhena asphodeloides, Coptis chinensis, Rheum palmatum, another was Zingiber officinale, Aconitum carmichaeli, Eucommia ulmoides, Fraxinus rhynchophylla, Lonicera japonica. Blotting signals of nine medicines

  2. Blended learning – integrating E-learning with traditional learning methods in teaching basic medical science

    OpenAIRE

    J.G. Bagi; N.K. Hashilkar

    2014-01-01

    Background: Blended learning includes an integration of face to face classroom learning with technology enhanced online material. It provides the convenience, speed and cost effectiveness of e-learning with the personal touch of traditional learning. Objective: The objective of the present study was to assess the effectiveness of a combination of e-learning module and traditional teaching (Blended learning) as compared to traditional teaching alone to teach acid base homeostasis to Phase I MB...

  3. Consistency analysis of Keratograph and traditional methods to evaluate tear film function

    Directory of Open Access Journals (Sweden)

    Pei-Yang Shen

    2015-05-01

    Full Text Available AIM: To investigate repeatability and accuracy of a latest Keratograph for evaluating the tear film stability and to compare its measurements with that of traditional examination methods. METHODS: The results of noninvasive tear film break-up time(NI-BUTincluding the first tear film break-up time(BUT-fand the average tear film break-up time(BUT-avewere measured by Keratograph. The repeatability of the measurements was evaluated by coefficient of variation(CVand intraclass correlation coefficient(ICC. Wilcoxon Signed-Rank test was used to compare NI-BUT with fluorescein tear film break-up time(FBUTto confirm the correlation between NI-BUT and FBUT, Schirmer I test values. Bland-Altman analysis was used to evaluate consistency. RESULTS: The study recruited 48 subjects(48 eyes(mean age 38.7±15.2 years. The CV and ICC of BUT-f were respectively 12.6% and 0.95, those of BUT-ave were 9.8% and 0.96. The value of BUT-f was lower than that of FBUT. The difference had statistical significance(6.16±2.46s vs 7.46±1.92s, PPCONCLUSION: Keratograph can provide NI-BUT data that has a better repeatability and reliability, which has great application prospects in diagnosis and treatment of dry eye and refractive corneal surgery.

  4. Developing a Pictorial Sisterhood Method in collaboration with illiterate Maasai traditional birth attendants in northern Tanzania.

    Science.gov (United States)

    Roggeveen, Yadira; Schreuder, Renske; Zweekhorst, Marjolein; Manyama, Mange; Hatfield, Jennifer; Scheele, Fedde; van Roosmalen, Jos

    2016-10-01

    To study whether data on maternal mortality can be gathered while maintaining local ownership of data in a pastoralist setting where a scarcity of data sources and a culture of silence around maternal death amplifies limited awareness of the magnitude of maternal mortality. As part of a participatory action research project, investigators and illiterate traditional birth attendants (TBAs) collaboratively developed a quantitative participatory tool-the Pictorial Sisterhood Method-that was pilot-tested between March 12 and May 30, 2011, by researchers and TBAs in a cross-sectional study. Fourteen TBAs interviewed 496 women (sample), which led to 2241 sister units of risk and a maternal mortality ratio of 689 deaths per 100000 live births (95% confidence interval 419-959). Researchers interviewed 474 women (sample), leading to 1487 sister units of risk and a maternal mortality ratio of 484 (95% confidence interval 172-795). The Pictorial Sisterhood Method is an innovative application that might increase the participation of illiterate individuals in maternal health research and advocacy. It offers interesting opportunities to increase maternal mortality data ownership and awareness, and warrants further study and validation. Copyright © 2016 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

  5. Application of PROMETHEE-GAIA method for non-traditional machining processes selection

    Directory of Open Access Journals (Sweden)

    Prasad Karande

    2012-10-01

    Full Text Available With ever increasing demand for manufactured products of hard alloys and metals with high surface finish and complex shape geometry, more interest is now being paid to non-traditional machining (NTM processes, where energy in its direct form is used to remove material from workpiece surface. Compared to conventional machining processes, NTM processes possess almost unlimited capabilities and there is a strong believe that use of NTM processes would go on increasing in diverse range of applications. Presence of a large number of NTM processes along with complex characteristics and capabilities, and lack of experts in NTM process selection domain compel for development of a structured approach for NTM process selection for a given machining application. Past researchers have already attempted to solve NTM process selection problems using various complex mathematical approaches which often require a profound knowledge in mathematics/artificial intelligence from the part of process engineers. In this paper, four NTM process selection problems are solved using an integrated PROMETHEE (preference ranking organization method for enrichment evaluation and GAIA (geometrical analysis for interactive aid method which would act as a visual decision aid to the process engineers. The observed results are quite satisfactory and exactly match with the expected solutions.

  6. Evolutionary optimization methods for accelerator design

    Science.gov (United States)

    Poklonskiy, Alexey A.

    Many problems from the fields of accelerator physics and beam theory can be formulated as optimization problems and, as such, solved using optimization methods. Despite growing efficiency of the optimization methods, the adoption of modern optimization techniques in these fields is rather limited. Evolutionary Algorithms (EAs) form a relatively new and actively developed optimization methods family. They possess many attractive features such as: ease of the implementation, modest requirements on the objective function, a good tolerance to noise, robustness, and the ability to perform a global search efficiently. In this work we study the application of EAs to problems from accelerator physics and beam theory. We review the most commonly used methods of unconstrained optimization and describe the GATool, evolutionary algorithm and the software package, used in this work, in detail. Then we use a set of test problems to assess its performance in terms of computational resources, quality of the obtained result, and the tradeoff between them. We justify the choice of GATool as a heuristic method to generate cutoff values for the COSY-GO rigorous global optimization package for the COSY Infinity scientific computing package. We design the model of their mutual interaction and demonstrate that the quality of the result obtained by GATool increases as the information about the search domain is refined, which supports the usefulness of this model. We Giscuss GATool's performance on the problems suffering from static and dynamic noise and study useful strategies of GATool parameter tuning for these and other difficult problems. We review the challenges of constrained optimization with EAs and methods commonly used to overcome them. We describe REPA, a new constrained optimization method based on repairing, in exquisite detail, including the properties of its two repairing techniques: REFIND and REPROPT. We assess REPROPT's performance on the standard constrained

  7. VOLATILE CONSTITUENTS OF GINGER OIL PREPARED ACCORDING TO IRANIAN TRADITIONAL MEDICINE AND CONVENTIONAL METHOD: A COMPARATIVE STUDY.

    Science.gov (United States)

    Shirooye, Pantea; Mokaberinejad, Roshanak; Ara, Leila; Hamzeloo-Moghadam, Maryam

    2016-01-01

    Herbal medicines formulated as oils were believed to possess more powerful effects than their original plants in Iranian Traditional Medicine (ITM). One of the popular oils suggested for treatment of various indications was ginger oil. In the present study, to suggest a more convenient method of oil preparation (compared to the traditional method), ginger oil has been prepared according to both the traditional and conventional maceration methods and the volatile oil constituents have been compared. Ginger oil was obtained in sesame oil according to both the traditional way and the conventional (maceration) methods. The volatile oil of dried ginger and both oils were obtained by hydro-distillation and analyzed by gas chromatography/mass spectroscopy. Fifty five, fifty nine and fifty one components consisting 94 %, 94 % and 98 % of the total compounds were identified in the volatile oil of ginger, traditional and conventional oils, respectively. The most dominant compounds of the traditional and conventional oils were almost similar; however they were different from ginger essential oil which has also been to possess limited amounts of anti-inflammatory components. It was concluded that ginger oil could be prepared through maceration method and used for indications mentioned in ITM.

  8. DESIGNING INSTRUCTION FOR THE TRADITIONAL, ADULT, AND DISTANCE LEARNER: A New Engine for Technology-Based Teaching

    Directory of Open Access Journals (Sweden)

    Lawrence A. Tomei

    2011-10-01

    Full Text Available Adult students demand a wider variety of instructional strategies that encompass real-world, interactive, cooperative, and discovery learning experiences.Designing Instruction for the Traditional, Adult, and Distance Learner: A New Engine for Technology-Based Teaching explores how technology impacts the process of devising instructional plans as well as learning itself in adult students. Containing research from leading international experts, this publication proposes realistic and accurate archetypes to assist educators in incorporating state-of-the-art technologies into online instruction.This text proposes a new paradigm for designing, developing, implementing, and assessed technology-based instruction. It addresses three target populations of today's learner: traditional, adult, and distance education. The text proposes a new model of instructional system design (ISD for developing effective technology-based education that involves a five-step process focusing on the learner, learning theories, resources, delivery modalities, and outcomes.

  9. Replication protocol analysis: a method for the study of real-world design thinking

    DEFF Research Database (Denmark)

    Galle, Per; Kovacs, L. B.

    1996-01-01

    Given the brief of an architectural competition on site planning, and the design awarded the first prize, the first author (trained as an architect but not a participant in the competition) produced a line of reasoning that might have led from brief to design. In the paper, such ‘design replication......’ is refined into a method called ‘replication protocol analysis’ (RPA), and discussed from a methodological perspective of design research. It is argued that for the study of real-world design thinking this method offers distinct advantages over traditionaldesign protocol analysis’, which seeks to capture...

  10. Improving Nursing Students' Learning Outcomes in Fundamentals of Nursing Course through Combination of Traditional and e-Learning Methods.

    Science.gov (United States)

    Sheikhaboumasoudi, Rouhollah; Bagheri, Maryam; Hosseini, Sayed Abbas; Ashouri, Elaheh; Elahi, Nasrin

    2018-01-01

    Fundamentals of nursing course are prerequisite to providing comprehensive nursing care. Despite development of technology on nursing education, effectiveness of using e-learning methods in fundamentals of nursing course is unclear in clinical skills laboratory for nursing students. The aim of this study was to compare the effect of blended learning (combining e-learning with traditional learning methods) with traditional learning alone on nursing students' scores. A two-group post-test experimental study was administered from February 2014 to February 2015. Two groups of nursing students who were taking the fundamentals of nursing course in Iran were compared. Sixty nursing students were selected as control group (just traditional learning methods) and experimental group (combining e-learning with traditional learning methods) for two consecutive semesters. Both groups participated in Objective Structured Clinical Examination (OSCE) and were evaluated in the same way using a prepared checklist and questionnaire of satisfaction. Statistical analysis was conducted through SPSS software version 16. Findings of this study reflected that mean of midterm (t = 2.00, p = 0.04) and final score (t = 2.50, p = 0.01) of the intervention group (combining e-learning with traditional learning methods) were significantly higher than the control group (traditional learning methods). The satisfaction of male students in intervention group was higher than in females (t = 2.60, p = 0.01). Based on the findings, this study suggests that the use of combining traditional learning methods with e-learning methods such as applying educational website and interactive online resources for fundamentals of nursing course instruction can be an effective supplement for improving nursing students' clinical skills.

  11. Comparing the Effects of Objective Structured Assessment of Technical Skills (OSATS) and Traditional Method on Learning of Students.

    Science.gov (United States)

    Mansoorian, Mohammad Reza; Hosseiny, Marzeih Sadat; Khosravan, Shahla; Alami, Ali; Alaviani, Mehri

    2015-06-01

    Despite the benefits of the objective structured assessment of technical skills (OSATS) and it appropriateness for evaluating clinical abilities of nursing students , few studies are available on the application of this method in nursing education. The purpose of this study was to compare the effect of using OSATS and traditional methods on the students' learning. We also aimed to signify students' views about these two methods and their views about the scores they received in these methods in a medical emergency course. A quasi-experimental study was performed on 45 first semester students in nursing and medical emergencies passing a course on fundamentals of practice. The students were selected by a census method and evaluated by both the OSATS and traditional methods. Data collection was performed using checklists prepared based on the 'text book of nursing procedures checklists' published by Iranian nursing organization and a questionnaire containing learning rate and students' estimation of their received scores. Descriptive statistics as well as paired t-test and independent samples t-test were used in data analysis. The mean of students' score in OSATS was significantly higher than their mean score in traditional method (P = 0.01). Moreover, the mean of self-evaluation score after the traditional method was relatively the same as the score the students received in the exam. However, the mean of self-evaluation score after the OSATS was relatively lower than the scores the students received in the OSATS exam. Most students believed that OSATS can evaluate a wide range of students' knowledge and skills compared to traditional method. Results of this study indicated the better effect of OSATS on learning and its relative superiority in precise assessment of clinical skills compared with the traditional evaluation method. Therefore, we recommend using this method in evaluation of students in practical courses.

  12. Association between traditional oral hygiene methods with tooth wear, gingival bleeding, and recession: A descriptive cross-sectional study.

    Science.gov (United States)

    Shah, Naseem; Mathur, Vijay Prakash; Jain, Veena; Logani, Ajay

    2018-01-01

    Oral hygiene maintenance is crucial for prevention of various oral diseases. Oral hygiene practices across the country vary largely and people in peri-urban and rural areas use traditional methods of oral hygiene like powders, bark, oil and salt etc. Their effect on oral soft and hard tissues need to be studied to understand their beneficial and/ or harmful effects on maintenance of oral hygiene and prevention or causation of oral diseases. This study aimed to assess the plaque-cleaning efficacy, gingival bleeding, recession and tooth wear with different traditional oral hygiene methods as compared to use of toothpaste-toothbrush, the most accepted method of oral hygiene practice. Hospital based cross sectional analytical study. Results: Total 1062 traditional oral hygiene method users were compared with same number of toothpaste-brush users. The maximum number in the former group used tooth powder (76%) as compared to other indigenous methods, such as use of bark of trees etc and out of tooth powder users; almost 75% reported using red toothpowder. The plaque scores and gingival bleeding & recession were found to be more in traditional oral hygiene method users. The toothwear was also more severe among the toothpowder users. Traditional methods were found to be inferior in plaque control as was documented by increased bleeding and gingival recession. Its effect on hard tissues of teeth was very damaging with higher tooth wear scores on all surfaces.

  13. Andragogical Teaching Methods to Enhance Non-Traditional Student Classroom Engagement

    Science.gov (United States)

    Allen, Pamela; Withey, Paul; Lawton, Deb; Aquino, Carlos Tasso

    2016-01-01

    The aim of this study was to provide a reflection of current trends in higher education, identify some of the changes in student behavior, and potential identification of non-traditional classroom facilitation with the purpose of strengthening active learning and use of technology in the classroom. Non-traditional teaching is emerging in the form…

  14. Understanding Patient Values and the Manifestations in Clinical Research with Traditional Chinese Medicine—With Practical Suggestions for Trial Design and Implementation

    Directory of Open Access Journals (Sweden)

    Wei Mu

    2013-01-01

    Full Text Available Objective. To define patient values, identify their manifestations in a randomized clinical trial, and investigate the possible implications for clinical research of traditional Chinese medicine. Methods. We categorized patient values manifestations into patient choice, preference, compliance, and patient-reported outcomes and summarized the underlying personal values through purposeful electronic searches for relevant reports. By hypothesizing a set of positive versus negative circumstances occurring in the enrollment, intervention allocation, treatment, and the follow-up stage of a trial, it is possible to discuss the potential implications of patient values manifestation on a trial with traditional Chinese medicine. Results. Patient values and its manifestations are ubiquitous in the process of clinical research with traditional Chinese medicine. These values may provide motivation for participation or engender the internal and external validity of the study. Conclusions. Trialists should attach sufficient importance to the needs and concerns of individual participant. To incorporate patient values into the design and conduct of a clinical study with traditional Chinese medicine, researchers are recommended to adopt participant-friendly design and use patient-reported outcomes, take convenience-for-patients measures, and help foster rational beliefs and behaviors of trial participants.

  15. Understanding patient values and the manifestations in clinical research with traditional chinese medicine-with practical suggestions for trial design and implementation.

    Science.gov (United States)

    Mu, Wei; Shang, Hongcai

    2013-01-01

    Objective. To define patient values, identify their manifestations in a randomized clinical trial, and investigate the possible implications for clinical research of traditional Chinese medicine. Methods. We categorized patient values manifestations into patient choice, preference, compliance, and patient-reported outcomes and summarized the underlying personal values through purposeful electronic searches for relevant reports. By hypothesizing a set of positive versus negative circumstances occurring in the enrollment, intervention allocation, treatment, and the follow-up stage of a trial, it is possible to discuss the potential implications of patient values manifestation on a trial with traditional Chinese medicine. Results. Patient values and its manifestations are ubiquitous in the process of clinical research with traditional Chinese medicine. These values may provide motivation for participation or engender the internal and external validity of the study. Conclusions. Trialists should attach sufficient importance to the needs and concerns of individual participant. To incorporate patient values into the design and conduct of a clinical study with traditional Chinese medicine, researchers are recommended to adopt participant-friendly design and use patient-reported outcomes, take convenience-for-patients measures, and help foster rational beliefs and behaviors of trial participants.

  16. Traditional methods v. new technologies – dilemmas for dietary assessment in large-scale nutrition surveys and studies

    DEFF Research Database (Denmark)

    Amoutzopoulos, B.; Steer, T.; Roberts, C.

    2018-01-01

    assessment in population surveys’, was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer...... of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion ‘Traditional methods v. new technologies: dilemmas for dietary......The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses...

  17. Exploring the Ligand-Protein Networks in Traditional Chinese Medicine: Current Databases, Methods, and Applications

    Directory of Open Access Journals (Sweden)

    Mingzhu Zhao

    2013-01-01

    Full Text Available The traditional Chinese medicine (TCM, which has thousands of years of clinical application among China and other Asian countries, is the pioneer of the “multicomponent-multitarget” and network pharmacology. Although there is no doubt of the efficacy, it is difficult to elucidate convincing underlying mechanism of TCM due to its complex composition and unclear pharmacology. The use of ligand-protein networks has been gaining significant value in the history of drug discovery while its application in TCM is still in its early stage. This paper firstly surveys TCM databases for virtual screening that have been greatly expanded in size and data diversity in recent years. On that basis, different screening methods and strategies for identifying active ingredients and targets of TCM are outlined based on the amount of network information available, both on sides of ligand bioactivity and the protein structures. Furthermore, applications of successful in silico target identification attempts are discussed in detail along with experiments in exploring the ligand-protein networks of TCM. Finally, it will be concluded that the prospective application of ligand-protein networks can be used not only to predict protein targets of a small molecule, but also to explore the mode of action of TCM.

  18. Interobserver Reliability of Four Diagnostic Methods Using Traditional Korean Medicine for Stroke Patients

    Directory of Open Access Journals (Sweden)

    Ju Ah Lee

    2014-01-01

    Full Text Available Objective. The aim of this study is to evaluate the consistency of pattern identification (PI, a set of diagnostic indicators used by traditional Korean medicine (TKM clinicians. Methods. A total of 168 stroke patients who were admitted into oriental medical university hospitals from June 2012 through January 2013 were included in the study. Using the PI indicators, each patient was independently diagnosed by two experts from the same department. Interobserver consistency was assessed by simple percentage agreement as well as by kappa and AC1 statistics. Results. Interobserver agreement on the PI indicators (for all patients was generally high: pulse diagnosis signs (AC1=0.66–0.89; inspection signs (AC1=0.66–0.95; listening/smelling signs (AC1=0.67–0.88; and inquiry signs (AC1=0.62–0.94. Conclusion. In four examinations, there was moderate agreement between the clinicians on the PI indicators. To improve clinician consistency (e.g., in the diagnostic criteria used, it is necessary to analyze the reasons for inconsistency and to improve clinician training.

  19. Cultural continuity, traditional Indigenous language, and diabetes in Alberta First Nations: a mixed methods study.

    Science.gov (United States)

    Oster, Richard T; Grier, Angela; Lightning, Rick; Mayan, Maria J; Toth, Ellen L

    2014-10-19

    We used an exploratory sequential mixed methods approach to study the association between cultural continuity, self-determination, and diabetes prevalence in First Nations in Alberta, Canada. We conducted a qualitative description where we interviewed 10 Cree and Blackfoot leaders (members of Chief and Council) from across the province to understand cultural continuity, self-determination, and their relationship to health and diabetes, in the Alberta First Nations context. Based on the qualitative findings, we then conducted a cross-sectional analysis using provincial administrative data and publically available data for 31 First Nations communities to quantitatively examine any relationship between cultural continuity and diabetes prevalence. Cultural continuity, or "being who we are", is foundational to health in successful First Nations. Self-determination, or "being a self-sufficient Nation", stems from cultural continuity and is seriously compromised in today's Alberta Cree and Blackfoot Nations. Unfortunately, First Nations are in a continuous struggle with government policy. The intergenerational effects of colonization continue to impact the culture, which undermines the sense of self-determination, and contributes to diabetes and ill health. Crude diabetes prevalence varied dramatically among First Nations with values as low as 1.2% and as high as 18.3%. Those First Nations that appeared to have more cultural continuity (measured by traditional Indigenous language knowledge) had significantly lower diabetes prevalence after adjustment for socio-economic factors (p =0.007). First Nations that have been better able to preserve their culture may be relatively protected from diabetes.

  20. Model creation of moving redox reaction boundary in agarose gel electrophoresis by traditional potassium permanganate method.

    Science.gov (United States)

    Xie, Hai-Yang; Liu, Qian; Li, Jia-Hao; Fan, Liu-Yin; Cao, Cheng-Xi

    2013-02-21

    A novel moving redox reaction boundary (MRRB) model was developed for studying electrophoretic behaviors of analytes involving redox reaction on the principle of moving reaction boundary (MRB). Traditional potassium permanganate method was used to create the boundary model in agarose gel electrophoresis because of the rapid reaction rate associated with MnO(4)(-) ions and Fe(2+) ions. MRB velocity equation was proposed to describe the general functional relationship between velocity of moving redox reaction boundary (V(MRRB)) and concentration of reactant, and can be extrapolated to similar MRB techniques. Parameters affecting the redox reaction boundary were investigated in detail. Under the selected conditions, good linear relationship between boundary movement distance and time were obtained. The potential application of MRRB in electromigration redox reaction titration was performed in two different concentration levels. The precision of the V(MRRB) was studied and the relative standard deviations were below 8.1%, illustrating the good repeatability achieved in this experiment. The proposed MRRB model enriches the MRB theory and also provides a feasible realization of manual control of redox reaction process in electrophoretic analysis.

  1. Assessing Knowledge Retention of an Immersive Serious Game vs. a Traditional Education Method in Aviation Safety.

    Science.gov (United States)

    Chittaro, Luca; Buttussi, Fabio

    2015-04-01

    Thanks to the increasing availability of consumer head-mounted displays, educational applications of immersive VR could now reach to the general public, especially if they include gaming elements (immersive serious games). Safety education of citizens could be a particularly promising domain for immersive serious games, because people tend not to pay attention to and benefit from current safety materials. In this paper, we propose an HMD-based immersive game for educating passengers about aviation safety that allows players to experience a serious aircraft emergency with the goal of surviving it. We compare the proposed approach to a traditional aviation safety education method (the safety card) used by airlines. Unlike most studies of VR for safety knowledge acquisition, we do not focus only on assessing learning immediately after the experience but we extend our attention to knowledge retention over a longer time span. This is a fundamental requirement, because people need to retain safety procedures in order to apply them when faced with danger. A knowledge test administered before, immediately after and one week after the experimental condition showed that the immersive serious game was superior to the safety card. Moreover, subjective as well as physiological measurements employed in the study showed that the immersive serious game was more engaging and fear-arousing than the safety card, a factor that can contribute to explain the obtained superior retention, as we discuss in the paper.

  2. New design methods for computer aided architecturald design methodology teaching

    NARCIS (Netherlands)

    Achten, H.H.

    2003-01-01

    Architects and architectural students are exploring new ways of design using Computer Aided Architectural Design software. This exploration is seldom backed up from a design methodological viewpoint. In this paper, a design methodological framework for reflection on innovate design processes by

  3. Re-adaptation of Malay House Thermal Comfort Design Elements into Modern Building Elements – Case Study of Selangor Traditional Malay House & Low Energy Building in Malaysia

    OpenAIRE

    Nur Hidayahtuljamilah Ramli

    2012-01-01

    The traditional Malay house is one of the richest components of Malay’s cultural heritage in Malaysia. Generally, the traditional Malay house is a reflection of the Malay community’s way of living. With greater global awareness of the environment and a renewed perspective on contemporary Malaysian architecture, architects and designers are once again looking for tropical solutions in building design. One of the main characteristics of traditional Malay house is that they are designed with a d...

  4. The Design and Implementation of Virtual Roaming in Yunnan Diqing Tibetan traditional Villages

    Directory of Open Access Journals (Sweden)

    Cao Lucheng

    2018-01-01

    Full Text Available Traditional residence is the continuation of intangible cultural heritage and the primitive soil for development. At present, the protection and inheritance of traditional villages have been impacted by the process of modernization, and the phenomenon of assimilation is very serious. This article takes the above questions as the breakthrough point, and then analyzes why and how to use virtual reality technology to better solve the above problems, and take the Yunnan Diqing Tibetan traditional dwellings as the specific example to explore. First, using VR technology, with real images and sound, the paper simulate a near real virtual world. Secondly, we collect a large amount of real image information, and make the visualization model of building by using 3DMAX software platform, UV Mapping and Rendering optimization. Finally, the Vizard virtual reality development platform was used to establish the roaming system and realize the virtual interaction. The roaming system was posted online so that overcome the disadvantages of not intuitive and low capability of interaction, and these new ideas can give a whole new meaning in the protection projects of the cultural relic buildings. At the same time, visitors could enjoy the "Dian-style" architectural style and cultural connotation of dwelling house in Diqing Yunnan.

  5. DESIGN OPTIMIZATION METHOD USED IN MECHANICAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    SCURTU Iacob Liviu

    2016-11-01

    Full Text Available This paper presents an optimization study in mechanical engineering. First part of the research describe the structural optimization method used, followed by the presentation of several optimization studies conducted in recent years. The second part of the paper presents the CAD modelling of an agricultural plough component. The beam of the plough is analysed using finite element method. The plough component is meshed in solid elements, and the load case which mimics the working conditions of agricultural equipment of this are created. The model is prepared to find the optimal structural design, after the FEA study of the model is done. The mass reduction of part is the criterion applied for this optimization study. The end of this research presents the final results and the model optimized shape.

  6. To the rescue of traditions: Emotional Design and Cultural Values, A Case Study Based on Barranquilla´s Carnival

    Directory of Open Access Journals (Sweden)

    Angélica Lascar

    2014-05-01

    Full Text Available Heritage, as a cultural expression, refers to a set of tangible and intangible assets that certain groups of individuals use to express themselves. Design is part of these productions that empower objects and create emotional bonds between people and their culture. "The Guacherna: Funny dolls" is a collection of characters inspired in Barranquilla´s Carnival that focuses on the relation between cultural and symbolic values as raw material for emotional design. Throughout this process, it was found that narrative as derived from traditions, as the carnival encourages and strengthens emotional bonds between people and objects, opens possibilities for these traditions to be renewed, divulged, and helps them remain alive in the memory.

  7. Comparative Study Between the Two Experimental Design Approaches Taguchi and Traditional in Presence of Control by Control Interactions

    Directory of Open Access Journals (Sweden)

    Arias-Nava Elías Heriberto

    2015-03-01

    Full Text Available Design of experiments plays an important role in the field of creating and innovating process and products directly in manufacturing and improving areas. There are several areas into designs of experiments; robust design is one of them. Robust parameter design is a principle that emphasize in products creation through a correct selection of values called “control” which make a product robust to the variability by the noise introducing by another factors known as “noise” factors. This article aims for a comparative study between two well-known robust design methodologies, making a special emphasis in the control by control interaction effects over optimal operating conditions. The results showed that Taguchi´s crossed arrays are unable to estimate all significant terms in a model. The optimizations result concludes that the Taguchi´s approach is less efficient than the traditional approach in both; maximization and minimization.

  8. Developments of an Interactive Sail Design Method

    Directory of Open Access Journals (Sweden)

    S. M. Malpede

    2000-01-01

    Full Text Available This paper presents a new tool for performing the integrated design and analysis of a sail. The features of the system are the geometrical definition of a sail shape, using the Bezier surface method, the creation of a finite element model for the non-linear structural analysis and a fluid-dynamic model for the aerodynamic analysis. The system has been developed using MATLAB(r. Recent sail design efforts have been focused on solving the aeroelastic behavior of the sail. The pressure distribution on a sail changes continuously, by virtue of cloth stretch and flexing. The sail shape determines the pressure distribution and, at the same time, the pressure distribution on the sail stretches and flexes the sail material determining its shape. This characteristic non-linear behavior requires iterative solution strategies to obtain the equilibrium configuration and evaluate the forces involved. The aeroelastic problem is tackled by combining structural with aerodynamic analysis. Firstly, pressure loads for a known sail-shape are computed (aerodynamic analysis. Secondly, the sail-shape is analyzed for the obtained external loads (structural analysis. The final solution is obtained by using an iterative analysis process, which involves both aerodynamic and the structural analysis. When the solution converges, it is possible to make design modifications.

  9. Comparative Study of Powdered Ginger Drink Processed by Different Method:Traditional and using Evaporation Machine

    Science.gov (United States)

    Apriyana, Wuri; Taufika Rosyida, Vita; Nur Hayati, Septi; Darsih, Cici; Dewi Poeloengasih, Crescentiana

    2017-12-01

    Ginger drink is one of the traditional beverage that became one of the products of interest by consumers in Indonesia. This drink is believed to have excellent properties for the health of the body. In this study, we have compared the moisture content, ash content, metal content and the identified compound of product which processed with traditional technique and using an evaporator machine. The results show that both of products fulfilled some parameters of the Indonesian National Standard for the traditional powdered drink. GC-MS analysis data showed the identified compound of both product. The major of hydrocarbon groups that influenced the flavor such as zingiberene, camphene, beta-phelladrine, beta-sesquepelladrine, curcumene, and beta-bisabolene were found higher in ginger drink powder treated with a machine than those processed traditionally.

  10. Hydraulic transmissivity determination for the groundwater exploration using vertical electric sounding method in comparison to the traditional methods

    International Nuclear Information System (INIS)

    Arshad, M.; Shakoor, A.; Ahmad, M.

    2013-01-01

    An important aquifer characteristic, transmissivity significantly contributes to the development of local and regional groundwater resources and solute transport management. Estimation of this property allows quantitative prediction of the hydraulic response and solute transport of the aquifer to recharge and pumping. This study presents the three techniques, used to compare transmissivity determination by Vertical Electric Sounding (VES) over the traditional techniques. The validation of VES was compared with the old widely used methods such as grain size distribution and pumping test techniques. Grain size distribution analysis was carried out to determine transmissivity. Pumping test was performed to determine transmissivity using the type curves solution for unconfined aquifer and taking into account the delayed yield. In resistivity imaging survey, the soil layers were detected through interpretation of resistivity data. Formation factor for each layer was determined with the relation of aquifer soil resistivity and ground water resistivity. The estimated transmissivities though grain size distribution, pumping test and resistivity survey were 0.588, 0.578 and 0.756m/sup 2//min, respectively. The results emphasized the potential of the resistivity survey for aquifer transmissivity determination. (author)

  11. Comparison of teaching about breast cancer via mobile or traditional learning methods in gynecology residents.

    Science.gov (United States)

    Alipour, Sadaf; Moini, Ashraf; Jafari-Adli, Shahrzad; Gharaie, Nooshin; Mansouri, Khorshid

    2012-01-01

    Mobile learning enables users to interact with educational resources while in variable locations. Medical students in residency positions need to assimilate considerable knowledge besides their practical training and we therefore aimed to evaluate the impact of using short message service via cell phone as a learning tool in residents of Obstetrics and Gynecology in our hospital. We sent short messages including data about breast cancer to the cell phones of 25 residents of gynecology and obstetrics and asked them to study a well-designed booklet containing another set of information about the disease in the same period. The rate of learning derived from the two methods was compared by pre- and post-tests and self-satisfaction assessed by a relevant questionnaire at the end of the program. The mobile learning method had a significantly better effect on learning and created more interest in the subject. Learning via receiving SMS can be an effective and appealing method of knowledge acquisition in higher levels of education.

  12. Design of convergent pierce electron gun of accelerator for radiation sterilization by the method of synthesis

    International Nuclear Information System (INIS)

    Kong Xiaoxiao; Li Quanfeng

    2003-01-01

    A synthesis technique for the preliminary design of convergent Pierce electron guns is introduced briefly which has a series of advantages over the traditional methods. A thermal cathode electron gun used in the accelerator for radiation sterilization with the synthesis method is redesigned, and the validity of this method is proved. Based on the preliminary design parameters given by the synthesis method, a simulating calculation program, EGUN, was used in the numerical figure design of the focusing electrode and the anode. The final results can meet the engineering requirement as the current being 1A, the normalized emittance being less than 4 mm·mrad, and the final current density showing uniformity

  13. New method of design of nonimaging concentrators.

    Science.gov (United States)

    Miñano, J C; González, J C

    1992-06-01

    A new method of designing nonimaging concentrators is presented and two new types of concentrators are developed. The first is an aspheric lens, and the second is a lens-mirror combination. A ray tracing of three-dimensional concentrators (with rotational symmetry) is also done, showing that the lens-mirror combination has a total transmission as high as that of the full compound parabolic concentrators, while their depth is much smaller than the classical parabolic mirror-nonimaging concentrator combinations. Another important feature of this concentrator is that the optically active surfaces are not in contact with the receiver, as occurs in other nonimaging concentrators in which the rim of the mirror coincides with the rim of the receiver.

  14. Optical design teaching by computing graphic methods

    Science.gov (United States)

    Vazquez-Molini, D.; Muñoz-Luna, J.; Fernandez-Balbuena, A. A.; Garcia-Botella, A.; Belloni, P.; Alda, J.

    2012-10-01

    One of the key challenges in the teaching of Optics is that students need to know not only the math of the optical design, but also, and more important, to grasp and understand the optics in a three-dimensional space. Having a clear image of the problem to solve is the first step in order to begin to solve that problem. Therefore to achieve that the students not only must know the equation of refraction law but they have also to understand how the main parameters of this law are interacting among them. This should be a major goal in the teaching course. Optical graphic methods are a valuable tool in this way since they have the advantage of visual information and the accuracy of a computer calculation.

  15. Research and Design of Rootkit Detection Method

    Science.gov (United States)

    Liu, Leian; Yin, Zuanxing; Shen, Yuli; Lin, Haitao; Wang, Hongjiang

    Rootkit is one of the most important issues of network communication systems, which is related to the security and privacy of Internet users. Because of the existence of the back door of the operating system, a hacker can use rootkit to attack and invade other people's computers and thus he can capture passwords and message traffic to and from these computers easily. With the development of the rootkit technology, its applications are more and more extensive and it becomes increasingly difficult to detect it. In addition, for various reasons such as trade secrets, being difficult to be developed, and so on, the rootkit detection technology information and effective tools are still relatively scarce. In this paper, based on the in-depth analysis of the rootkit detection technology, a new kind of the rootkit detection structure is designed and a new method (software), X-Anti, is proposed. Test results show that software designed based on structure proposed is much more efficient than any other rootkit detection software.

  16. The Use Potential of Traditional Building Materials for the Realization of Structures by Modern Methods of Construction

    Science.gov (United States)

    Spišáková, Marcela; Mačková, Daniela

    2015-11-01

    The sustainable building has taken off in recent years with many investors looking for new and different methods of construction. The traditional building materials can be made out of natural materials, while others can help to lower energy costs of the occupant once built. Regardless of what the goal of the investor is, traditional building materials and their use is on the rise. The submitted paper provides an overview of natural building materials and possible modern building systems using these construction materials. Based on the questionnaire survey is defined the use potential of traditional building materials for the realization of the construction by methods of modern constructions and then are determined the drivers and barriers of traditional materials through using modern methods of construction. Considering the analysis of the achieved results, we can identify the gaps in the construction market in Slovakia and also to assess the perception of potential investors in the field of traditional building materials use, which is the purpose of submitted paper.

  17. The Use Potential of Traditional Building Materials for the Realization of Structures by Modern Methods of Construction

    Directory of Open Access Journals (Sweden)

    Spišáková Marcela

    2015-11-01

    Full Text Available The sustainable building has taken off in recent years with many investors looking for new and different methods of construction. The traditional building materials can be made out of natural materials, while others can help to lower energy costs of the occupant once built. Regardless of what the goal of the investor is, traditional building materials and their use is on the rise. The submitted paper provides an overview of natural building materials and possible modern building systems using these construction materials. Based on the questionnaire survey is defined the use potential of traditional building materials for the realization of the construction by methods of modern constructions and then are determined the drivers and barriers of traditional materials through using modern methods of construction. Considering the analysis of the achieved results, we can identify the gaps in the construction market in Slovakia and also to assess the perception of potential investors in the field of traditional building materials use, which is the purpose of submitted paper.

  18. Design Methods in the Emergent City

    DEFF Research Database (Denmark)

    Samson, Kristine

    The paper seeks to define urban design in relation to the specific challenges of emerging cities. Through a case study of Mudo Coletivos temporary structure, Bolha Imobiliaria, and the making of it, I wish to outline a design approach for urban design in cities lacking public spaces. Urban design...... is understood in a broad sense, not as architectural design but as spatial design and artistic interventions in public space. Through the paper I will address how the designer can co-create and reassemble existing urban spaces through design acts. The approach suggests a situated design methodology but is based...... on a theoretical understanding. It is my belief that the designer, by looking into the emergent properties of urban spaces, instead of its physical and cartographical outlines, can see her work as a processual intervention in the city rather than durable object design....

  19. A mixed methods inquiry into the determinants of traditional food consumption among three Cree communities of Eeyou Istchee from an ecological perspective.

    Science.gov (United States)

    Gaudin, Véronique Laberge; Receveur, Olivier; Walz, Leah; Girard, Félix; Potvin, Louise

    2014-01-01

    The Aboriginal nations of Canada have higher incidences of chronic diseases, coinciding with profound changes in their environment, lifestyle and diet. Traditional foods can protect against the risks of chronic disease. However, their consumption is in decline, and little is known about the complex mechanisms underlying this trend. To identify the factors involved in traditional food consumption by Cree Aboriginal people living in 3 communities in northern Quebec, Canada. Design. A mixed methods explanatory design, including focus group interviews to interpret the results of logistic regression. This study includes a secondary data analysis of a cross-sectional survey of 3 Cree communities (n=374) and 4 focus group interviews (n=23). In the first, quantitative phase of the study, data were collected using a food-frequency questionnaire along with a structured questionnaire. Subsequently, the focus group interviews helped explain and build on the results of logistic regressions. People who consume traditional food 3 days or more weekly were more likely to be 40 years old and over, to walk 30 minutes or more per day, not to have completed their schooling, to live in Mistissini and to be a hunter (ptraditional food consumption, rendering the effect undetectable. In addition, focus group participants suggested that traditional food consumption is the result of multiple interconnected influences, including individual, family, community and environmental influences, rather than a single factor. This study sheds light on a number of factors that are unique to traditional foods, factors that have been understudied to date. Efforts to promote and maintain traditional food consumption could improve the overall health and wellbeing of Cree communities.

  20. Acupuncture as a Complementary Method of Traditional Psoriasis Treatment: Myth or Reality?

    Science.gov (United States)

    Mahović, Darija; Mrsić, Fanika

    2016-08-01

    Dear Editor, the practitioners of traditional Chinese medicine described psoriasis some 2000 years ago (1). Psoriasis vulgaris is a common, chronic inflammatory skin disease whose worldwide prevalence ranges from 0.1-3% (2,3). Understanding the role of the immune system in psoriasis and the interplay between the innate and adaptive immune system has helped to manage this complex disease, which affects patients far beyond the skin changes themselves (2). In addition to the usual and widely accepted methods of treatment of psoriasis, including topical therapies, phototherapy, and conventional and biological systemic therapies, data can be found in the literature that suggest a favorable effect of acupuncture on the course of psoriasis (4,5). Despite that, this complementary method of traditional treatment of various diseases is not yet widely accepted worldwide. According to the World Health Organization (WHO), acupuncture has been an officially recognized method of treatment for more than 50 diseases from 1979 (5). At the Department of Neurology at the University Hospital Center Zagreb, acupuncture has been used since 2011 for the treatment of various types of headaches, trigeminal neuralgia, and spinal pain syndromes. We report the case of a patient with a known history of psoriasis who was treated for chronic migraines with acupuncture. The 49-year-old female patient was examined for headache of a pulsating character that she had had for 16 years. The headache was mainly located on the left side of head and accompanied by nausea, vomiting, and both photophobia and phonophobia, and there was a worsening of symptoms upon exertion. The headaches were occurring once a week with an average duration of 2-3 continuous days. The patient also had frequent mild headaches. Additionally, the patient was diagnosed with psoriasis at the age of 29 and was occasionally treated with phototherapy. Systemic therapy for psoriasis had not been given to the patient thus far. After the

  1. [Concern points and considerations for pharmacodynamic study design of new traditional Chinese medicines].

    Science.gov (United States)

    Huang, Fang-Hua

    2014-03-01

    Pharmacodynamic (PD) studies play an important role in research and development of new traditonal Chinese medicines (TCMs). Phamacologic and toxicologic studies that aim to research drug ability can provide supporting data for the clinical trials and reduce the risk of clinical trials. In recent years, PD studies in TCMs are developing and progressing, but there are still some problems affecting the value of PD studies in the development of new TCMs. The value of PD studies depends on scientific and rational study design. This article summaries some defects in PD study design of new TCMs that are common in the application data, including defects in study type, testing targets, dosing, duration of administration, control group, testing time. This article also discusses some points of concern and specific requirements for PD study design of new TCMs.

  2. Traditional versus Contemporary Goals and Methods in Accounting Education: Bridging the Gap with Cooperative Learning.

    Science.gov (United States)

    Lindquist, Tim M.

    1995-01-01

    In groups, 49 accounting students completed a 5-week analysis of audit reporting issues using cooperative learning. Positive student reactions and achievement suggested that contemporary active learning approaches are compatible with the traditional accounting goal of preparing for the Certified Public Accountants examination. (SK)

  3. Current Status of Surgical Planning for Orthognathic Surgery: Traditional Methods versus 3D Surgical Planning

    Directory of Open Access Journals (Sweden)

    Jeffrey A. Hammoudeh, MD, DDS

    2015-02-01

    Conclusions: It is our opinion that virtual model surgery will displace and replace traditional model surgery as it will become cost and time effective in both the private and academic setting for practitioners providing orthognathic surgical care in cleft and noncleft patients.

  4. A Follow-up Study of Two Methods of Teaching Mathematics: Traditional versus New Math

    Science.gov (United States)

    Walton, Gene A.; And Others

    1977-01-01

    When high school mathematics grades and test scores were analyzed, findings showed that high- and middle-ability students who had a modern mathematics course in the seventh grade received significantly higher grades in Algebra I, II, III, and Geometry than did students who had a traditional seventh grade mathematics course. (DT)

  5. A Comparison of Traditional and Cooperative Learning Methods in Online Learning

    Science.gov (United States)

    Kupczynski, Lori; Mundy, Marie-Anne; Ruiz, Alberto

    2013-01-01

    The purpose of this study was to examine the effects of the Community of Inquiry framework through an in-depth examination of learning comprised of teaching, social and cognitive presence in traditional versus cooperative online teaching at a community college. A total of 21 students participated in this study, with approximately 45% having taken…

  6. DIAGNOSTIC CARDIAC CATHETERIZATION USING THE MEDRAD AVANTA FLUID MANAGEMENT SYSTEM AS COMPARED TO THE TRADITIONAL MANUAL INJECTION METHOD

    Energy Technology Data Exchange (ETDEWEB)

    Winniford, Michael D

    2013-02-08

    smaller diameter catheters have both been shown to reduce the volume of contrast administered. The use of smaller size catheters also permits more rapid hemostasis, thus allowing shorter ambulation time without the need for costly wound closure devices. These factors can result in enhanced patient satisfaction as well as more efficient management of post-procedure rooms. The intent of this study was to demonstrate that using the MEDRAD Avanta Fluid Management Injection System (MEDRAD, INC., Pittsburgh, PA) for coronary diagnostic procedures can produce a reduction in the volume of contrast administered without loss of operational quality or efficiency. In addition, this study will explore procedure time and efficiency in an effort to minimize the amount of ionizing radiation delivered to the patient as well as the diagnostic team members. Study Design This is a post-market study designed to collect data during diagnostic cardiac catheterization when utilizing 5FR or 6FR catheters in conjunction with the Avanta Fluid Management System or a manual manifold injection method control group. A minimum of 420 patients scheduled for diagnostic cardiac catheterization will be enrolled in the study cohort. Patients will be assigned into the following two groups. Group 1: Catheterization with 5FR or 6FR catheters, using the traditional manual manifold injection method for contrast media delivery which is defined as manual hand injection of contrast media through a 3 or 4 port manifold and left ventriculography performed via standard fixed rate power injection. Group 2: Catheterization with 5FR or 6FR catheters, using the MEDRAD Avanta system for contrast media delivery. Study endpoints include volume of contrast media administered during diagnostic cardiac catheterization, volume of contrast media wasted post-procedure, procedure time (defined as the time from first catheter insertion to last diagnostic catheter removal), fluoroscopy time and angiographic image quality. The study

  7. Core design methods for advanced LMFBRs

    International Nuclear Information System (INIS)

    Chandler, J.C.; Marr, D.R.; McCurry, D.C.; Cantley, D.A.

    1977-05-01

    The multidiscipline approach to advanced LMFBR core design requires an iterative design procedure to obtain a closely-coupled design. HEDL's philosophy requires that the designs should be coupled to the extent that the design limiting fuel pin, the design limiting duct and the core reactivity lifetime should all be equal and should equal the fuel residence time. The design procedure consists of an iterative loop involving three stages of the design sequence. Stage 1 consists of general mechanical design and reactor physics scoping calculations to arrive at an initial core layout. Stage 2 consists of detailed reactor physics calculations for the core configuration arrived at in Stage 1. Based upon the detailed reactor physics results, a decision is made either to alter the design (Stage 1) or go to Stage 3. Stage 3 consists of core orificing and detailed component mechanical design calculations. At this point, an assessment is made regarding design adequacy. If the design is inadequate the entire procedure is repeated until the design is acceptable

  8. Comparative Analysis of the Thermal Insulation of Traditional and Newly Designed Protective Clothing for Foundry Workers

    Directory of Open Access Journals (Sweden)

    Iwona Frydrych

    2016-09-01

    Full Text Available An objective of the undertaken research was checking the applicability of aluminized basalt fabrics for the production of clothing for foundry workers. The results of flammability, the resistance to contact, convective and radiation heat, as well as the resistance to big molten metal splashes confirmed the thesis of applicability of the packages with the use of aluminized basalt fabric content for the assumed purpose; therefore, such protective clothing was produced. Thermal comfort of foundry workers is very important and related to many factors, i.e., the structure of the protective clothing package, the number of layers, their thickness, the distance between the body and appropriate underwear. In the paper, a comparison of the results of thermal insulation measurement of two kinds of protective clothing is presented: the traditional one made of aluminized glass fabrics and the new one made of aluminized basalt fabrics. Measurements of clothing thermal insulation were conducted using a thermal manikin dressed in the protective clothing and three kinds of underwear products covering the upper and lower part of the manikin.

  9. Traditional Mold Analysis Compared to a DNA-based Method of Mold Analysis with Applications in Asthmatics' Homes

    Science.gov (United States)

    Traditional environmental mold analysis is based-on microscopic observations and counting of mold structures collected from the air on a sticky surface or culturing of molds on growth media for identification and quantification. A DNA-based method of mold analysis called mol...

  10. EPE fundamentals and impact of EUV: Will traditional design-rule calculations work in the era of EUV?

    Science.gov (United States)

    Gabor, Allen H.; Brendler, Andrew C.; Brunner, Timothy A.; Chen, Xuemei; Culp, James A.; Levinson, Harry J.

    2018-03-01

    The relationship between edge placement error, semiconductor design-rule determination and predicted yield in the era of EUV lithography is examined. This paper starts with the basics of edge placement error and then builds up to design-rule calculations. We show that edge placement error (EPE) definitions can be used as the building blocks for design-rule equations but that in the last several years the term "EPE" has been used in the literature to refer to many patterning errors that are not EPE. We then explore the concept of "Good Fields"1 and use it predict the n-sigma value needed for design-rule determination. Specifically, fundamental yield calculations based on the failure opportunities per chip are used to determine at what n-sigma "value" design-rules need to be tested to ensure high yield. The "value" can be a space between two features, an intersect area between two features, a minimum area of a feature, etc. It is shown that across chip variation of design-rule important values needs to be tested at sigma values between seven and eight which is much higher than the four-sigma values traditionally used for design-rule determination. After recommending new statistics be used for design-rule calculations the paper examines the impact of EUV lithography on sources of variation important for design-rule calculations. We show that stochastics can be treated as an effective dose variation that is fully sampled across every chip. Combining the increased within chip variation from EUV with the understanding that across chip variation of design-rule important values needs to not cause a yield loss at significantly higher sigma values than have traditionally been looked at, the conclusion is reached that across-wafer, wafer-to-wafer and lot-to-lot variation will have to overscale for any technology introducing EUV lithography where stochastic noise is a significant fraction of the effective dose variation. We will emphasize stochastic effects on edge placement

  11. Educating Instructional Designers: Different Methods for Different Outcomes.

    Science.gov (United States)

    Rowland, Gordon; And Others

    1994-01-01

    Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

  12. Efficient Design Methods for Embedded Communication Systems

    Directory of Open Access Journals (Sweden)

    Holzer M

    2006-01-01

    Full Text Available Nowadays, design of embedded systems is confronted with complex signal processing algorithms and a multitude of computational intensive multimedia applications, while time to product launch has been extremely reduced. Especially in the wireless domain, those challenges are stacked with tough requirements on power consumption and chip size. Unfortunately, design productivity did not undergo a similar progression, and therefore fails to cope with the heterogeneity of modern architectures. Electronic design automation tools exhibit deep gaps in the design flow like high-level characterization of algorithms, floating-point to fixed-point conversion, hardware/software partitioning, and virtual prototyping. This tutorial paper surveys several promising approaches to solve the widespread design problems in this field. An overview over consistent design methodologies that establish a framework for connecting the different design tasks is given. This is followed by a discussion of solutions for the integrated automation of specific design tasks.

  13. Field calibration of blowfly-derived DNA against traditional methods for assessing mammal diversity in tropical forests.

    Science.gov (United States)

    Lee, Ping-Shin; Gan, Han Ming; Clements, Gopalasamy Reuben; Wilson, John-James

    2016-11-01

    Mammal diversity assessments based on DNA derived from invertebrates have been suggested as alternatives to assessments based on traditional methods; however, no study has field-tested both approaches simultaneously. In Peninsular Malaysia, we calibrated the performance of mammal DNA derived from blowflies (Diptera: Calliphoridae) against traditional methods used to detect species. We first compared five methods (cage trapping, mist netting, hair trapping, scat collection, and blowfly-derived DNA) in a forest reserve with no recent reports of megafauna. Blowfly-derived DNA and mist netting detected the joint highest number of species (n = 6). Only one species was detected by multiple methods. Compared to the other methods, blowfly-derived DNA detected both volant and non-volant species. In another forest reserve, rich in megafauna, we calibrated blowfly-derived DNA against camera traps. Blowfly-derived DNA detected more species (n = 11) than camera traps (n = 9), with only one species detected by both methods. The rarefaction curve indicated that blowfly-derived DNA would continue to detect more species with greater sampling effort. With further calibration, blowfly-derived DNA may join the list of traditional field methods. Areas for further investigation include blowfly feeding and dispersal biology, primer biases, and the assembly of a comprehensive and taxonomically-consistent DNA barcode reference library.

  14. Traditional and innovative experimental and clinical trial designs and their advantages and pitfalls.

    Science.gov (United States)

    Weimer, Katja; Enck, Paul

    2014-01-01

    Many study designs and design variants have been developed in the past to either overcome or enhance drug-placebo differences in clinical trials or to identify and characterize placebo responders in experimental studies. They share many commonalities as well as differences that are discussed here: the role of deception and ethical restrictions, habituation effects and the control of the natural course of disease, assay sensitivity testing and effective blinding, acceptability and motivation of patients and volunteers, and the development of individualized medicine. These are fostered by two opposite strategies: utilizing the beneficial aspects of the placebo response-and avoiding its negative counterpart, the nocebo effect-in medical routine for the benefit of patients, and minimizing-by controlling-the negative aspects of the placebo effect during drug development.

  15. Between modern and traditional dialogues to the design of public bench for Iran

    OpenAIRE

    Feyzi, Roghieh, 1977-

    2015-01-01

    Neste estudo, intitulado “Entre o Moderno e o Tradicional, Diálogos para o Design de um banco público para o Irão”, foram investigadas diferentes cidades no Irão, inicialmente através da análise de espaços públicos e dos diferentes tipos de clima que podem naturalmente e largamente ir afectando o desenvolvimento urbano e o design. Desde o início, a ascensão das cidades tem sido influenciada por vários fatores. Fatores como a visão e a perspectiva do mundo, a economia (a definição material ...

  16. Spacecraft early design validation using formal methods

    International Nuclear Information System (INIS)

    Bozzano, Marco; Cimatti, Alessandro; Katoen, Joost-Pieter; Katsaros, Panagiotis; Mokos, Konstantinos; Nguyen, Viet Yen; Noll, Thomas; Postma, Bart; Roveri, Marco

    2014-01-01

    The size and complexity of software in spacecraft is increasing exponentially, and this trend complicates its validation within the context of the overall spacecraft system. Current validation methods are labor-intensive as they rely on manual analysis, review and inspection. For future space missions, we developed – with challenging requirements from the European space industry – a novel modeling language and toolset for a (semi-)automated validation approach. Our modeling language is a dialect of AADL and enables engineers to express the system, the software, and their reliability aspects. The COMPASS toolset utilizes state-of-the-art model checking techniques, both qualitative and probabilistic, for the analysis of requirements related to functional correctness, safety, dependability and performance. Several pilot projects have been performed by industry, with two of them having focused on the system-level of a satellite platform in development. Our efforts resulted in a significant advancement of validating spacecraft designs from several perspectives, using a single integrated system model. The associated technology readiness level increased from level 1 (basic concepts and ideas) to early level 4 (laboratory-tested)

  17. Global optimization methods for engineering design

    Science.gov (United States)

    Arora, Jasbir S.

    1990-01-01

    The problem is to find a global minimum for the Problem P. Necessary and sufficient conditions are available for local optimality. However, global solution can be assured only under the assumption of convexity of the problem. If the constraint set S is compact and the cost function is continuous on it, existence of a global minimum is guaranteed. However, in view of the fact that no global optimality conditions are available, a global solution can be found only by an exhaustive search to satisfy Inequality. The exhaustive search can be organized in such a way that the entire design space need not be searched for the solution. This way the computational burden is reduced somewhat. It is concluded that zooming algorithm for global optimizations appears to be a good alternative to stochastic methods. More testing is needed; a general, robust, and efficient local minimizer is required. IDESIGN was used in all numerical calculations which is based on a sequential quadratic programming algorithm, and since feasible set keeps on shrinking, a good algorithm to find an initial feasible point is required. Such algorithms need to be developed and evaluated.

  18. Festival of Curses: A Traditional Crime Control Method In Edo State –Nigeria

    OpenAIRE

    Rashidi Akanji Okunola; Adediran Daniel Ikuomola

    2016-01-01

    Festivals and ceremonies are part and parcel of African culture, usually in all its pump, merriment and pageantry. However, with the increasing wave of criminal activities in Nigeria especially in Edo state, festivals and ceremonies are being redefined and conceptualized in practice. Only recently a new festival ‘Festival of Curses’ was brought to the fore in combating crime in Edo state. The study therefore seeks to explain the festival as a traditional mechanism in crime control, the nature...

  19. Modified Right Heart Contrast Echocardiography Versus Traditional Method in Diagnosis of Right-to-Left Shunt: A Comparative Study

    OpenAIRE

    Wang, Yi; Zeng, Jie; Yin, Lixue; Zhang, Mei; Hou, Dailun

    2016-01-01

    BACKGROUND: The purpose of this study was to evaluate the reliability, effectiveness, and safety of modified right heart contrast transthoracic echocardiography (cTTE) in comparison with the traditional method. MATERIAL AND METHODS: We performed a modified right heart cTTE using saline mixed with a small sample of patient's own blood. Samples were agitated with varying intensity. This study protocol involved microscopic analysis and patient evaluation. 1. Microscopic analysis: After two contr...

  20. Active learning on the ward: outcomes from a comparative trial with traditional methods.

    Science.gov (United States)

    Melo Prado, Hegla; Hannois Falbo, Gilliatt; Rodrigues Falbo, Ana; Natal Figueirôa, José

    2011-03-01

    Academic activity during internship is essentially practical and ward rounds are traditionally considered the cornerstone of clinical education. However, the efficacy and effectiveness of ward rounds for learning purposes have been under-investigated and it is necessary to assess alternative educational paradigms for this activity. This study aimed to compare the educational effectiveness of ward rounds conducted with two different learning methodologies. Student subjects were first tested on 30 true/false questions to assess their initial degree of knowledge on pneumonia and diarrhoea. Afterwards, they attended ward rounds conducted using an active and a traditional learning methodology. The participants were submitted to a second test 48hours later in order to assess knowledge acquisition and were asked to answer two questions about self-directed learning and their opinions on the two learning methodologies used. Seventy-two medical students taking part in a paediatric clinic rotation were enrolled. The active methodology proved to be more effective than the traditional methodology for the three outcomes considered: knowledge acquisition (33 students [45.8%] versus 21 students [29.2%]; p=0.03); self-directed learning (38 students [52.8%] versus 11 students [15.3%]; pmethods (61 students [84.7%] versus 38 students [52.8%]; ptraditional methodology in a ward-based context. This study seems to be valuable in terms of the new evidence it demonstrates on learning methodologies in the context of the ward round. © Blackwell Publishing Ltd 2011.

  1. Comparison Of Keyword Based Clustering Of Web Documents By Using Openstack 4j And By Traditional Method

    Directory of Open Access Journals (Sweden)

    Shiza Anand

    2015-08-01

    Full Text Available As the number of hypertext documents are increasing continuously day by day on world wide web. Therefore clustering methods will be required to bind documents into the clusters repositories according to the similarity lying between the documents. Various clustering methods exist such as Hierarchical Based K-means Fuzzy Logic Based Centroid Based etc. These keyword based clustering methods takes much more amount of time for creating containers and putting documents in their respective containers. These traditional methods use File Handling techniques of different programming languages for creating repositories and transferring web documents into these containers. In contrast openstack4j SDK is a new technique for creating containers and shifting web documents into these containers according to the similarity in much more less amount of time as compared to the traditional methods. Another benefit of this technique is that this SDK understands and reads all types of files such as jpg html pdf doc etc. This paper compares the time required for clustering of documents by using openstack4j and by traditional methods and suggests various search engines to adopt this technique for clustering so that they give result to the user querries in less amount of time.

  2. Design methods for structures under thermal ratchet

    International Nuclear Information System (INIS)

    Branca, T.R.; McLean, J.L.

    1975-01-01

    Previous work on the thermal ratchet analysis of a simple pipe is extended to the case of an intersection of a pipe with a spherical shell. The chosen nozzle configuration is subjected to an internal pressure which remains constant, and a cyclic thermal transient which is representative of the type of transient that might be expected for components of a LMFBR. A number of cross-sections through the nozzle were examined, each yielding a different combination of elastic primary and secondary stress. These stresses, together with their associated cyclic strain growth, as determined from an elastic-plastic-creep analysis of the nozzle, were then plotted on a Miller or Bree-type diagram. Thus, a number of points, one for each cross-section considered, were available for comparison with the data obtained from the ratchet analysis of simple pipe sections. Both the elastic and inelastic analyses on the nozzle were performed using the finite element method of structural analysis of the ANSYS computer code. The pipe ratchetting cases were computed using the Oak Ridge National Laboratory PLACRE code. For a simple pipe ratchet case, a brief comparison is given between the version of ANSYS used in this study, the ANSYS version used in previous work and PLACRE code. The three programs did not yield identical results. Further study is needed to resolve the discrepancies that were observed. The results of the comparison between the nozzle ratchet and pipe ratchet solutions indicate that reasonable predictions can be made for the nozzle ratchet strains based on elastic parameters and design curves developed from pipe ratchetting solutions. (author)

  3. Socio-economic comparison between traditional and improved cultivation methods in agroforestry systems, East Usambara Mountains, Tanzania.

    Science.gov (United States)

    Reyes, Teija; Quiroz, Roberto; Msikula, Shija

    2005-11-01

    The East Usambara Mountains, recognized as one of the 25 most important biodiversity hot spots in the world, have a high degree of species diversity and endemism that is threatened by increasing human pressure on resources. Traditional slash and burn cultivation in the area is no longer sustainable. However, it is possible to maintain land productivity, decrease land degradation, and improve rural people's livelihood by ameliorating cultivation methods. Improved agroforestry seems to be a very convincing and suitable method for buffer zones of conservation areas. Farmers could receive a reasonable net income from their farm with little investment in terms of time, capital, and labor. By increasing the diversity and production of already existing cultivations, the pressure on natural forests can be diminished. The present study shows a significant gap between traditional cultivation methods and improved agroforestry systems in socio-economic terms. Improved agroforestry systems provide approximately double income per capita in comparison to traditional methods. More intensified cash crop cultivation in the highlands of the East Usambara also results in double income compared to that in the lowlands. However, people are sensitive to risks of changing farming practices. Encouraging farmers to apply better land management and practice sustainable cultivation of cash crops in combination with multipurpose trees would be relevant in improving their economic situation in the relatively short term. The markets of most cash crops are already available. Improved agroforestry methods could ameliorate the living conditions of the local population and protect the natural reserves from human disturbance.

  4. Paleodemographic age-at-death distributions of two Mexican skeletal collections: a comparison of transition analysis and traditional aging methods.

    Science.gov (United States)

    Bullock, Meggan; Márquez, Lourdes; Hernández, Patricia; Ruíz, Fernando

    2013-09-01

    Traditional methods of aging adult skeletons suffer from the problem of age mimicry of the reference collection, as described by Bocquet-Appel and Masset (1982). Transition analysis (Boldsen et al., 2002) is a method of aging adult skeletons that addresses the problem of age mimicry of the reference collection by allowing users to select an appropriate prior probability. In order to evaluate whether transition analysis results in significantly different age estimates for adults, the method was applied to skeletal collections from Postclassic Cholula and Contact-Period Xochimilco. The resulting age-at-death distributions were then compared with age-at-death distributions for the two populations constructed using traditional aging methods. Although the traditional aging methods result in age-at-death distributions with high young adult mortality and few individuals living past the age of 50, the age-at-death distributions constructed using transition analysis indicate that most individuals who lived into adulthood lived past the age of 50. Copyright © 2013 Wiley Periodicals, Inc.

  5. Foundations of Digital Methods : Query Design

    NARCIS (Netherlands)

    Rogers, R.; Schäfer, M.T.; van Es, K.

    2017-01-01

    Broadly speaking digital methods may be considered the deployment of online tools and data for the purposes of social and medium research. More speci cally, they derive from online methods, or methods of the medium, which are reimagined and repurposed for research. The methods to be repurposed are

  6. Technology-based vs. traditional instruction. A comparison of two methods for teaching the skill of performing a 12-lead ECG.

    Science.gov (United States)

    Jeffries, Pamela R; Woolf, Shirley; Linde, Beverly

    2003-01-01

    The purpose of this study was to compare the effectiveness of an interactive, multimedia CD-ROM with traditional methods of teaching the skill of performing a 12-lead ECG. A randomized pre/posttest experimental design was used. Seventy-seven baccalaureate nursing students in a required, senior-level critical-care course at a large midwestern university were recruited for the study. Two teaching methods were compared. The traditional method included a self-study module, a brief lecture and demonstration by an instructor, and hands-on experience using a plastic manikin and a real 12-lead ECG machine in the learning laboratory. The second method covered the same content using an interactive, multimedia CD-ROM embedded with virtual reality and supplemented with a self-study module. There were no significant (p method, or perception of self-efficacy in performing the skill. Overall results indicated that both groups were satisfied with their instructional method and were similar in their ability to demonstrate the skill correctly on a live, simulated patient. This evaluation study is a beginning step to assess new and potentially more cost-effective teaching methods and their effects on student learning outcomes and behaviors, including the transfer of skill acquisition via a computer simulation to a real patient.

  7. Cultural Heritage Digitalization on Traditional Sundanese Music Instrument Using Augmented Reality Markerless Marker Method

    Directory of Open Access Journals (Sweden)

    Budi Arifitama

    2017-07-01

    Full Text Available Research into cultural heritage which implements augmented reality technology is limited. Most recent research on cultural heritage are limited on storing data and information in the form of databases, this creates a disadvantage for people who wants to see and feel at the same moment on actual cultural heritage objects. This paper, proposes a solution which could merge the existing cultural object with people using augmented reality technology. This technology would preserve traditional instrument in the form of 3D object which can be digitally protected. The result showed that the use of augmented reality on preserving cultural heritage would benefit people who try to protect their culture.

  8. The critical assessment of research traditional and new methods of evaluation

    CERN Document Server

    Bailin, Alan

    2010-01-01

    This book examines the following factors: sponsorship of research, control of the dissemination of research, effects of dominant research paradigms, financial interests of authors, publishers, and editors, role of new technologies (for example, Web 2.0).It is widely accepted among researchers and educators that the peer review process, the reputation of the publisher and examination of the author's credentials are the gold standards for assessing the quality of research and information. However, the traditional gold standards are not sufficient, and the effective evaluation of information req

  9. Human Systems Interface Design Methods Using Ecological Interface Design Principles

    International Nuclear Information System (INIS)

    Hong, Seung Kweon; Park, Jung Chul; Kim, Sun Su; Sim, Kwang Pyo; Yuk, Seung Yul; Choi, Jae Hyeon; Yoon, Seung Hyun

    2009-12-01

    The results of this study categorized into two parts. The first part is the guidelines for EID designs. The procedure to observe for EID design is composed of 6 steps; 1) to define a target system, 2) to make an abstraction hierarchy model, 3) to check the link structure among each components included in the layers of abstraction hierarchy model, 4) to transform information requirements to variables, 5) to make the graphs related to each variables, 6) to check the graphs by visual display design principles and heuristic rules. The second part is an EID design alternative for nuclear power plant. The EID for high level function represents the energy balance and energy flow in each loop of nuclear power plant. The EID for middle level function represents the performance indicators of each equipment involved in the all processes of changing from coolants to steam. The EID for low level function represents the values measured in each equipment such as temperature, pressure, water level and so on

  10. Bionic Design Methods - A practical approach

    DEFF Research Database (Denmark)

    Kepler, Jørgen Asbøll; Stokholm, Marianne Denise J.

    2004-01-01

    Nature has served as inspiration for product design throughout history. Applications range from poetic translations of form to utilization of primary functional principles. This paper describes a generally applicable design methodology for transforming natural functional principles to feasible...... product design. From a formulation of design demands, which need not necessarily be very precise, the approach continues with a study of natural objects (anaimals, plants) which are subject to the same demands. From this study, the working principle(s) are derived. This (these) are then clarified through...... illustrative models, which should be simplified as much as possible. The simplified principle may now be evaluated and transformed into practical design. The methodology is clarified through examples, taken from a series of extended workshops held atAalborg University ....

  11. A meta-analysis of the effects of non-traditional teaching methods on the critical thinking abilities of nursing students.

    Science.gov (United States)

    Lee, JuHee; Lee, Yoonju; Gong, SaeLom; Bae, Juyeon; Choi, Moonki

    2016-09-15

    Scientific framework is important in designing curricula and evaluating students in the field of education and clinical practice. The purpose of this study was to examine the effectiveness of non-traditional educational methods on critical thinking skills. A systematic review approach was applied. Studies published in peer-reviewed journals from January 2001 to December 2014 were searched using electronic databases and major education journals. A meta-analysis was performed using Review Manager 5.2. Reviewing the included studies, the California Critical Thinking Dispositions Inventory (CCTDI) and California Critical Thinking Skills Test (CCTST) were used to assess the effectiveness of critical thinking in the meta-analysis. The eight CCTDI datasets showed that non- traditional teaching methods (i.e., no lectures) were more effective compared to control groups (standardized mean difference [SMD]: 0.42, 95 % confidence interval [CI]: 0.26-0.57, p teaching and learning methods in these studies were also had significantly more effects when compared to the control groups (SMD: 0.29, 95 % CI: 0.10-0.48, p = 0.003). This research showed that new teaching and learning methods designed to improve critical thinking were generally effective at enhancing critical thinking dispositions.

  12. ENTREPRENEURIAL INNOVATION IN TRADITIONAL WEAVING CRAFTSMEN DESIGNED BATIK FOR IMPROVING THE TOURISM INDUSTRY IN KLATEN

    Directory of Open Access Journals (Sweden)

    Sri Murni

    2011-12-01

    Full Text Available The target of this study is to improve skilled knowledge and attitude worker of weave fasten as that self-supporting as according to potency and also opportunity work at industrial company, which is on finally can improve the quality of its life. Special target of this study give the knowledge of entrepreneurship among worker of weave fasten so that have high job ethos and also can yield pre-eminent masterpieces capable to compete in global market. The implementation take place to start 16 July until 23 July 2010, what consist of three phase that is activity early stage cover preparation phase, middle phase of activity which phase execution of training and also final phase of activity covering phase handling of post training. This training assign value added because there is skilled of batik design innovation at weave fastens affecting at make-up of production addition. The next study shall earn to measure effectiveness of “transfer training” on so that will be able to know how far done training can alter behavior of educative participant plunging in corporate world and industrial world and also trying self-supporting.

  13. Traditional methods used by patients for the management of recurrent aphthous stomatitis.

    Directory of Open Access Journals (Sweden)

    Shruthi Hegde

    2017-12-01

    Results: A total of 326 patients reported with RAS. The study sample consisted of 171 females (52.5% and 155 males (47.5%. In our study 198 subjects (60.7% gave history of receiving treatment and 128 subjects (39.3 % did not receive any kind of treatment. Out of the 198 subjects, 63(31.8% of individuals received conventional treatment, alternative treatments were opted by 85(43% patients and combined treatment modalities were opted by 50(25.2% patients. Over the counter medications were used by 36 (18% patients. Treatment outcome was satisfactory according to 137(69% individuals and treatment was not satisfactory for 61 (31% patients. Conclusion: This study gives insight into the various traditional medicines used in south India for RAS and to the best of our knowledge, this is first study which describes the same. Our study adds new information to the current literature about traditional medications for RAS. [J Complement Med Res 2017; 6(4.000: 364-368

  14. Panel presentation: Should some type of incentive regulation replace traditional methods for regulating LDC's?

    International Nuclear Information System (INIS)

    Farman, R.D.

    1992-01-01

    This paper discusses the wants and fears of gas utility companies with regards to incentive regulation. The idea of replacing the traditional rate-of-return regulation with incentive regulation sound very desirous in that it should provide greater management flexibility, quicker and more streamlined regulatory processes, and utility financial rewards based on how well customer needs are met. However, the main fear is that this could result in arbitrary, inappropriate productivity or efficiency targets, or would embody a risk/reward ratio skewed more heavily toward financial penalties than opportunities to increase earnings. The paper presents some of the obstacles of traditional regulation which include a lack of incentive to minimize operational costs; a lack of incentive to introduce new technology, products, or services; prevent the need for flexibility to compete in contestable markets; and the diversion caused by utility managers having to manage the regulatory process rather than delivering value to customers. The paper concludes by comparing the incentive regulation program used in the telecommunications industry to the natural gas industry to demonstrate why the success of the telecommunications model doesn't apply to the gas utilities incentive model

  15. ADDRESSING RESEARCH DESIGN PROBLEM IN MIXED METHODS RESEARCH

    OpenAIRE

    Hamed ALAVI; Patrycja HĄBEK

    2016-01-01

    Alongside other disciplines in social sciences, management researchers use mixed methods research more and more in conduct of their scientific investigations. Mixed methods approach can also be used in the field of production engineering. In comparison with traditional quantitative and qualitative research methods, reasons behind increasing popularity of mixed research method in management science can be traced in different factors. First of all, any particular discipline in management can be...

  16. Traditional Methods which are Known and Applied in order to Achieve Voluntary Abortion by Married Women Living in Elazig.

    Directory of Open Access Journals (Sweden)

    Feyza (Nazik Sevindik

    2007-10-01

    Full Text Available This study have been performed in order to describe traditional methods which are known and applied for achieving voluntary abortion by married women living in downtown of Elazig. 426 women have been selected rely on the fifteen years old and married by the represantive 67500 living women in the downtown Elazig. It has been reached to 417 women at repetetive visits. Mean age of women is 36,39±10,26, first pregnancy years are 19,96±4,99, first birth age is 20,02±6,05. Numbers of avarage pregnancy are 3,61±0,12, numbers of voluntary abortion is 0,32±0,04. Voluntary abortion rate is %18,2. %93 of women have stated that they know at least one traditional abortion method, and %19,7 of women declared that they used traditional abortion methods. %14,9 of them stated that they lift a heavy furniture or goods, while %8,2 drink flu drug and asprin, %11,3 jump rope and jump by shaking from high where, %4,8 put a poultry quill, matchstick and knitting needle into uterus, %3,6 put a mallow or aubergine root into uterus servicks, %2,6 drink a boiled quinine henna and mallow, %3,1 sit into vapour of boiled straw or parsley by milk during stomacache, and %10,8 shake a carpet. As education level of women decrase, usage of traditional abortion methods increase (p=0,001. In order to decrease the use of these unsafe methods, public education, increasing usage of family planning services, and prevention of unwanted pregnancies should be obtained. [TAF Prev Med Bull 2007; 6(5.000: 321-324

  17. Traditional Methods which are Known and Applied in order to Achieve Voluntary Abortion by Married Women Living in Elazig.

    Directory of Open Access Journals (Sweden)

    Feyza (Nazik Sevindik

    2007-10-01

    Full Text Available This study have been performed in order to describe traditional methods which are known and applied for achieving voluntary abortion by married women living in downtown of Elazig. 426 women have been selected rely on the fifteen years old and married by the represantive 67500 living women in the downtown Elazig. It has been reached to 417 women at repetetive visits. Mean age of women is 36,39±10,26, first pregnancy years are 19,96±4,99, first birth age is 20,02±6,05. Numbers of avarage pregnancy are 3,61±0,12, numbers of voluntary abortion is 0,32±0,04. Voluntary abortion rate is %18,2. %93 of women have stated that they know at least one traditional abortion method, and %19,7 of women declared that they used traditional abortion methods. %14,9 of them stated that they lift a heavy furniture or goods, while %8,2 drink flu drug and asprin, %11,3 jump rope and jump by shaking from high where, %4,8 put a poultry quill, matchstick and knitting needle into uterus, %3,6 put a mallow or aubergine root into uterus servicks, %2,6 drink a boiled quinine henna and mallow, %3,1 sit into vapour of boiled straw or parsley by milk during stomacache, and %10,8 shake a carpet. As education level of women decrase, usage of traditional abortion methods increase (p=0,001. In order to decrease the use of these unsafe methods, public education, increasing usage of family planning services, and prevention of unwanted pregnancies should be obtained. [TAF Prev Med Bull. 2007; 6(5: 321-324

  18. Hybrid Methods in Designing Sierpinski Gasket Antennas

    Directory of Open Access Journals (Sweden)

    Mudrik Alaydrus

    2010-12-01

    Full Text Available Sierpinki gasket antennas as example of fractal antennas show multiband characteristics. The computer simulation of Sierpinksi gasket monopole with finite ground needs prohibitively large computer memory and more computational time. Hybrid methods consist of surface integral equation method and physical optics or uniform geometrical theory of diffraction should alleviate this computational burdens. The so-called full hybridization of the different methods with modifying the incoming electromagnetic waves in case of hybrid method surface integral equation method and physical optics and modification of the Greens function for hybrid method surface integral equation method and uniform geometrical theory of diffraction plays the central role in the observation. Comparison between results of different methods are given and also measurements of three Sierpinksi gasket antennas. The multiband characteristics of the antennas still can be seen with some reduction and enhancement of resonances.

  19. Participatory design methods in telemedicine research

    DEFF Research Database (Denmark)

    Clemensen, Jane; Rothmann, Mette Juel; Smith, Anthony C.

    2017-01-01

    Healthcare systems require a paradigm shift in the way healthcare services are delivered to counteract demographic changes in patient populations, expanding technological developments and the increasing complexity of healthcare. Participatory design (PD) is a methodology that promotes the partici...

  20. Demystifying Mixed Methods Research Design: A Review of the Literature

    Science.gov (United States)

    Caruth, Gail D.

    2013-01-01

    Mixed methods research evolved in response to the observed limitations of both quantitative and qualitative designs and is a more complex method. The purpose of this paper was to examine mixed methods research in an attempt to demystify the design thereby allowing those less familiar with its design an opportunity to utilize it in future research.…

  1. Comparative methods of concrete portal frame design

    OpenAIRE

    A, Letengsang

    2014-01-01

    The objective of this thesis was to design a concrete portal frame with two column spacings of 12 meters and 6 meters and its structural elements in a building located in Hämeenlinna city, Finland. A comprehension study on the concrete design chapter of Eurocode 2 was done before proceeding on the calculation process, the materials’ properties. The corresponding ca-pacity diagrams from concrete product manufacturers in Finland can be assistance tools during the calculation process. ...

  2. Research on design methods and aerodynamics performance of CQUDTU-B21 airfoil

    DEFF Research Database (Denmark)

    Chen, Jin; Cheng, Jiangtao; Wen, Zhong Shen

    2012-01-01

    This paper presents the design methods of CQU-DTU-B21 airfoil for wind turbine. Compared with the traditional method of inverse design, the new method is described directly by a compound objective function to balance several conflicting requirements for design wind turbine airfoils, which based...... on design theory of airfoil profiles, blade element momentum (BEM) theory and airfoil Self-Noise prediction model. And then an optimization model with the target of maximum power performance on a 2D airfoil and low noise emission of design ranges for angle of attack has been developed for designing CQU......-DTU-B21 airfoil. To validate the optimization results, the comparison of the aerodynamics performance by XFOIL and wind tunnels test respectively at Re=3×106 is made between the CQU-DTU-B21 and DU93-W-210 which is widely used in wind turbines. © (2012) Trans Tech Publications, Switzerland....

  3. Protein extraction method for the proteomic study of a Mexican traditional fermented starchy food.

    Science.gov (United States)

    Cárdenas, C; Barkla, B J; Wacher, C; Delgado-Olivares, L; Rodríguez-Sanoja, R

    2014-12-05

    Pozol is a traditional fermented maize dough prepared in southeastern Mexico. Wide varieties of microorganisms have already been isolated from this spontaneously fermented product; and include fungi, yeasts, and lactic- and non-lactic acid bacteria. Pozol presents physicochemical features different from that of other food fermentation products, such as a high starch content, in addition to a low protein content. It is these qualities that make it intractable for protein recovery and characterization. The aim of this study was to develop a methodology to optimize the recovery of proteins from the pozol dough following fermentation, by reducing the complexity of the mixture prior to 2D-PAGE analysis and sequencing, to allow the characterization of the metaproteome of the dough. The proteome of 15day fermented maize dough was characterized; proteins were separated and analyzed by mass spectrometry (LC-MS/MS). Subsequent sequence homology database searching, identified numerous bacterial and fungi proteins; with a predominance of lactic acid bacterial proteins, mainly from the Lactobacillus genus. Fungi are mainly represented by Aspergillus. For dominant genera, the most prevalent proteins belong to carbohydrate metabolism and energy production, which suggest that at 15days of fermentation not only fungi but also bacteria are metabolically active. Several methodologies have been employed to study pozol, with a specific focus toward the identification of the microbiota of this fermented maize dough, using both traditional cultivation techniques and culture independent molecular techniques. However to date, the dynamics of this complex fermentation is not well understood. With the purpose to gain further insight into the nature of the fermentation, we used proteomic technologies to identify the origin of proteins and enzymes that facilitate substrate utilization and ultimately the development of the microbiota and fermentation. In this paper we overcome the first general

  4. Computerized tablet based versus traditional paper- based survey methods: results from adolescent's health research in schools of Maharashtra, India

    OpenAIRE

    Naveen Agarwal; Balram Paswan; Prakash H. Fulpagare; Dhirendra N Sinha; Thaksaphon Thamarangsi; Manju Rani

    2018-01-01

    Background and challenges to implementation Technological advancement is growing very fast in India and majority of young population is handling electronic devices often during leisure as well as at work. This study indicates that electronic tablets are less time consuming and improves survey response rate over the traditional paper-pencil survey method. Intervention or response An Android-based Global School-based Health Survey (GSHS) questionnaire was used with the...

  5. How do Millennial Engineering and Technology Students Experience Learning Through Traditional Teaching Methods Employed in the University Setting?

    OpenAIRE

    Howard, Elizabeth A

    2011-01-01

    The purpose of the study was to document and analyze how Millennial engineering and technology students experience learning in large lecture classrooms. To help achieve this purpose, perceptions Millennials have toward traditional teaching methods employed in large lecture classes were analyzed and discussed. Additionally, this study documented how Millennials experienced technology within large lecture classrooms. A learning model depicting how Millennials experience learning within the larg...

  6. T-method duct design. Part 3

    International Nuclear Information System (INIS)

    Tsal, R.J.; Behls, H.F.; Mangel, R.

    1990-01-01

    This paper introduces a new method for simulating HVAC duct systems, called T-method. The desirability of simulation appears in many HVAC problems, such as determining system operating efficiency, system retrofitting, nuclear plant normal/emergency conditions, fire/smoke control systems, fans operating in parallel, pressure balancing after system modification, and noise generated by dampers. T-method is capable of simulating these problems. This paper includes problem definition, a theoretical approach, calculation procedures, and many examples

  7. Running and Metabolic Demands of Elite Rugby Union Assessed Using Traditional, Metabolic Power, and Heart Rate Monitoring Methods

    Science.gov (United States)

    Dubois, Romain; Paillard, Thierry; Lyons, Mark; McGrath, David; Maurelli, Olivier; Prioux, Jacques

    2017-01-01

    The aims of this study were (1) to analyze elite rugby union game demands using 3 different approaches: traditional, metabolic and heart rate-based methods (2) to explore the relationship between these methods and (3) to explore positional differences between the backs and forwards players. Time motion analysis and game demands of fourteen professional players (24.1 ± 3.4 y), over 5 European challenge cup games, were analyzed. Thresholds of 14.4 km·h-1, 20 W.kg-1 and 85% of maximal heart rate (HRmax) were set for high-intensity efforts across the three methods. The mean % of HRmax was 80.6 ± 4.3 % while 42.2 ± 16.5% of game time was spent above 85% of HRmax with no significant differences between the forwards and the backs. Our findings also show that the backs cover greater distances at high-speed than forwards (% difference: +35.2 ± 6.6%; pdemands of professional rugby games. The traditional and the metabolic-power approaches shows a close correlation concerning their relative values, nevertheless the difference in absolute values especially for the high-intensity thresholds demonstrates that the metabolic power approach may represent an interesting alternative to the traditional approaches used in evaluating the high-intensity running efforts required in rugby union games. Key points Elite/professional rugby union players Heart rate monitoring during official games Metabolic power approach PMID:28344455

  8. Is there still a role for traditional methods in the management of fractures of the zygomatic complex?

    LENUS (Irish Health Repository)

    O'Sullivan, S T

    2012-02-03

    With the introduction of low-profile mini-plating systems, a trend has developed towards open reduction and rigid internal fixation (ORIF) of fractures of the cranio-facial skeleton. The current policy for management of zygomatic fractures in our unit is to attempt primary reduction by traditional methods, and proceed to ORIF in the event of unsatisfactory fracture stability or alignment. Over a one-year period, 109 patients underwent surgical correction of fractures of the zygomatic complex. Standard Gilles\\' elevation was performed in 71 cases, percutaneous elevation in three cases, and ORIF was performed in 35 cases. Mean follow-up was 190 days. One case of persistent infraorbital step and three cases of residual malar flattening were documented in patients who underwent Gilles or percutaneous elevation. Morbidity associated with ORIF was minimal. We conclude that while ORIF of zygomatic fractures may offer better results than traditional methods in the management of complex fractures, traditional methods still have a role to play in less complex fractures.

  9. Empirical pillar design methods review report: Final report

    International Nuclear Information System (INIS)

    1988-02-01

    This report summarizes and evaluates empirical pillar design methods that may be of use during the conceptual design of a high-level nuclear waste repository in salt. The methods are discussed according to category (i.e, main, submain, and panel pillars; barrier pillars; and shaft pillars). Of the 21 identified for main, submain, and panel pillars, one method, the Confined Core Method, is evaluated as being most appropriate for conceptual design. Five methods are considered potentially applicable. Of six methods identified for barrier pillars, one method based on the Load Transfer Distance concept is considered most appropriate for design. Based on the evaluation of 25 methods identified for shaft pillars, an approximate sizing criterion is proposed for use in conceptual design. Aspects of pillar performance relating to creep, ground deformation, interaction with roof and floor rock, and response to high temperature environments are not adequately addressed by existing empirical design methods. 152 refs., 22 figs., 14 tabs

  10. User interface inspection methods a user-centered design method

    CERN Document Server

    Wilson, Chauncey

    2014-01-01

    User Interface Inspection Methods succinctly covers five inspection methods: heuristic evaluation, perspective-based user interface inspection, cognitive walkthrough, pluralistic walkthrough, and formal usability inspections. Heuristic evaluation is perhaps the best-known inspection method, requiring a group of evaluators to review a product against a set of general principles. The perspective-based user interface inspection is based on the principle that different perspectives will find different problems in a user interface. In the related persona-based inspection, colleagues assume the

  11. The Effect of Laboratory Training Model of Teaching and Traditional Method on Knowledge, Comprehension, Application, Skills-Components of Achievement, Total Achievement and Retention Level in Chemistry

    Science.gov (United States)

    Badeleh, Alireza

    2011-01-01

    The present study aimed at finding the effectiveness of the Laboratory Training Model of Teaching (LTM) and comparing it with the traditional methods of teaching chemistry to seventh standard students. It strived to determine whether the (LTM) method in chemistry would be significantly more effective than the Traditional method in respect to the…

  12. How to Construct a Mixed Methods Research Design

    OpenAIRE

    Schoonenboom, Judith; Johnson, R. Burke

    2017-01-01

    This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent desig...

  13. A comparative study of traditional lecture methods and interactive lecture methods in introductory geology courses for non-science majors at the college level

    Science.gov (United States)

    Hundley, Stacey A.

    In recent years there has been a national call for reform in undergraduate science education. The goal of this reform movement in science education is to develop ways to improve undergraduate student learning with an emphasis on developing more effective teaching practices. Introductory science courses at the college level are generally taught using a traditional lecture format. Recent studies have shown incorporating active learning strategies within the traditional lecture classroom has positive effects on student outcomes. This study focuses on incorporating interactive teaching methods into the traditional lecture classroom to enhance student learning for non-science majors enrolled in introductory geology courses at a private university. Students' experience and instructional preferences regarding introductory geology courses were identified from survey data analysis. The information gained from responses to the questionnaire was utilized to develop an interactive lecture introductory geology course for non-science majors. Student outcomes were examined in introductory geology courses based on two teaching methods: interactive lecture and traditional lecture. There were no significant statistical differences between the groups based on the student outcomes and teaching methods. Incorporating interactive lecture methods did not statistically improve student outcomes when compared to traditional lecture teaching methods. However, the responses to the survey revealed students have a preference for introductory geology courses taught with lecture and instructor-led discussions and students prefer to work independently or in small groups. The results of this study are useful to individuals who teach introductory geology courses and individuals who teach introductory science courses for non-science majors at the college level.

  14. Comparison of chest compression quality between the modified chest compression method with the use of smartphone application and the standardized traditional chest compression method during CPR.

    Science.gov (United States)

    Park, Sang-Sub

    2014-01-01

    The purpose of this study is to grasp difference in quality of chest compression accuracy between the modified chest compression method with the use of smartphone application and the standardized traditional chest compression method. Participants were progressed 64 people except 6 absentees among 70 people who agreed to participation with completing the CPR curriculum. In the classification of group in participants, the modified chest compression method was called as smartphone group (33 people). The standardized chest compression method was called as traditional group (31 people). The common equipments in both groups were used Manikin for practice and Manikin for evaluation. In the meantime, the smartphone group for application was utilized Android and iOS Operating System (OS) of 2 smartphone products (G, i). The measurement period was conducted from September 25th to 26th, 2012. Data analysis was used SPSS WIN 12.0 program. As a result of research, the proper compression depth (mm) was shown the proper compression depth (p< 0.01) in traditional group (53.77 mm) compared to smartphone group (48.35 mm). Even the proper chest compression (%) was formed suitably (p< 0.05) in traditional group (73.96%) more than smartphone group (60.51%). As for the awareness of chest compression accuracy, the traditional group (3.83 points) had the higher awareness of chest compression accuracy (p< 0.001) than the smartphone group (2.32 points). In the questionnaire that was additionally carried out 1 question only in smartphone group, the modified chest compression method with the use of smartphone had the high negative reason in rescuer for occurrence of hand back pain (48.5%) and unstable posture (21.2%).

  15. Understanding Foster Youth Outcomes: Is Propensity Scoring Better than Traditional Methods?

    Science.gov (United States)

    Berzin, Stephanie Cosner

    2010-01-01

    Objectives: This study seeks to examine the relationship between foster care and outcomes using multiple comparison methods to account for factors that put foster youth at risk independent of care. Methods: Using the National Longitudinal Survey of Youth 1997, matching, propensity scoring, and comparisons to the general population are used to…

  16. Does Feedback Design Matter? A Neurofeedback Study Comparing Immersive Virtual Reality and Traditional Training Screens in Elderly

    Directory of Open Access Journals (Sweden)

    Silvia Erika Kober

    2017-09-01

    Full Text Available Neurofeedback (NF is a Brain-Computer Interface (BCI application, in which the brain activity is fed back to the user in real-time enabling voluntary brain control. In this context, the significance of the feedback design is mainly unexplored. Highly immersive feedback scenarios using virtual reality (VR technique are available. However, their effects on subjective user experience as well as on objective outcome measures remain open. In the present article, we discuss the general pros and cons of using VR as feedback modality in BCI applications. Furthermore, we report on the results of an empirical study, in which the effects of traditional two-dimensional and three-dimensional VR based feedback scenarios on NF training performance and user experience in healthy older individuals and neurologic patients were compared. In conclusion, we suggest indications and contraindications of immersive VR feedback designs in BCI applications. Our results show that findings in healthy individuals are not always transferable to patient populations having an impact on serious game and feedback design.

  17. Panel presentation: Should some type of incentive regulation replace traditional methods for regulating LDCs?

    International Nuclear Information System (INIS)

    Turner, J.L.

    1992-01-01

    This paper reviews the advantages and disadvantages of using incentive regulation to provide the best service and rates for natural gas consumers and compares it to the traditional rate-of-return regulation. It discusses some of the allegations used to prevent incentive regulation such as the rate-of-return regulation provides an incentive to over-build and pad rate base, thus creating inefficiencies. The author also feels that strict competition is not necessarily beneficial and that some form of regulation is necessary. The paper goes on to outline the author's ideas of how a successful incentive plan should work while emphasizing his preference for a rate-of-return regulation. From the ratepayers' view, the incentives granted should be rewards for improvement in a utility's performance. In other words, there must be clear goals set for management and the fulfillment or lack of fulfillment should result in rewards or penalties. The author feels that incentive regulation could prove to be appropriate in the areas of demand side management such as energy conservation programs

  18. Evaluation of two methods for monitoring surface cleanliness-ATP bioluminescence and traditional hygiene swabbing.

    Science.gov (United States)

    Davidson, C A; Griffith, C J; Peters, A C; Fielding, L M

    1999-01-01

    The minimum bacterial detection limits and operator reproducibility of the Biotrace Clean-Tracetrade mark Rapid Cleanliness Test and traditional hygiene swabbing were determined. Areas (100 cm2) of food grade stainless steel were separately inoculated with known levels of Staphylococcus aureus (NCTC 6571) and Escherichia coli (ATCC 25922). Surfaces were sampled either immediately after inoculation while still wet, or after 60 min when completely dry. For both organisms the minimum detection limit of the ATP Clean-Tracetrade mark Rapid Cleanliness Test was 10(4) cfu/100 cm2 (p 10(7) cfu/100 cm2. Hygiene swabbing percentage recovery rates for both organisms were less than 0.1% for dried surfaces but ranged from 0.33% to 8.8% for wet surfaces. When assessed by six technically qualified operators, the Biotrace Clean-Tracetrade mark Rapid Cleanliness Test gave superior reproducibility for both clean and inoculated surfaces, giving mean coefficients of variation of 24% and 32%, respectively. Hygiene swabbing of inoculated surfaces gave a mean CV of 130%. The results are discussed in the context of hygiene monitoring within the food industry. Copyright 1999 John Wiley & Sons, Ltd.

  19. Video-based Learning Versus Traditional Method for Preclinical Course of Complete Denture Fabrication.

    Science.gov (United States)

    Fayaz, Amir; Mazahery, Azita; Hosseinzadeh, Mohammad; Yazdanpanah, Samane

    2015-03-01

    Advances in computer science and technology allow the instructors to use instructional multimedia programs to enhance the process of learning for dental students. The purpose of this study was to determine the effect of a new educational modality by using videotapes on the performance of dental students in preclinical course of complete denture fabrication. This quasi-experimental study was performed on 54 junior dental students in Shahid Beheshti University of Medical Sciences (SBMU). Twenty-five and 29 students were evaluated in two consecutive semesters as controls and cases, respectively for the same course. The two groups were matched in terms of "knowledge about complete denture fabrication" and "basic dental skills" using a written test and a practical exam, respectively. After the intervention, performance and clinical skills of students were assessed in 8 steps. Eventually, a post-test was carried out to find changes in knowledge and skills of students in this regard. In the two groups with the same baseline level of knowledge and skills, independent T-test showed that students in the test group had a significantly superior performance in primary impression taking (p= 0.001) and primary cast fabrication (p= 0.001). In terms of anterior teeth set up, students in the control group had a significantly better performance (p= 0.001). Instructional videotapes can aid in teaching fabrication of complete denture and are as effective as the traditional teaching system.

  20. Nutritional value of traditional Italian meat-based dishes: influence of cooking methods and recipe formulation.

    Science.gov (United States)

    D'Evoli, L; Salvatore, P; Lucarini, M; Nicoli, S; Aguzzi, A; Gabrielli, P; Lombardi-Boccia, G

    2009-01-01

    The present study provides a picture of the compositional figure and nutritive value of meat-based dishes typical of Italian culinary tradition. Recipes specific for a bovine meat cut (top-side) were selected among the most widespread ones in Italy: in pan, pizzaiola, cutlet, meat ball, and escalope. The total fat and cholesterol content varied depending on the ingredients utilized (extra-virgin olive oil, parmesan, egg). Meat-based dishes that utilized extra-virgin olive oil showed a significant reduction in palmitic and stearic acids and a parallel increase in oleic acid compared with raw meat; furthermore, the ratio among saturated fatty acids, monounsaturated fatty acids and polyunsaturated fatty acids shifted in favour of monounsaturated fatty acids. B vitamins were affected at different extent by heating; by contrast, vitamin E content increased because of the new sources of this vitamin, which masked losses due to heating. Ingredients (parmesan, discretionary salt) induced significant increases in the calcium and sodium concentrations compared with raw meat. The total iron content did not show marked differences in most of the meat-based dishes compared with raw meat; by contrast, losses in the heme-iron concentration were detected depending on the severity of heating treatments. Our findings suggest that heme iron, because of its important health aspects, might be a useful index of the nutritional quality of cooked meats.

  1. Motivation in service-learning: an improvement over traditional instructional methods

    Directory of Open Access Journals (Sweden)

    Monika Ciesielkiewicz

    2018-05-01

    Full Text Available This paper aims at exploring the motivation of university students who participated in service-learning projects as part of their coursework, and to determine whether their level of motivation is higher for the service-learning project as compared to performing more traditional academic tasks and assignments. The Service-Learning project carried out during the ICT in Education course intended to support the development of digital literacy in a Maasai school in Kenya. The instrument used to evaluate motivation of the university students is the motivation scale called Motivated Strategies for Learning Questionnaire (MSLQ proposed by Pintrich and his collaborators (1991 adapted to the Spanish population by Roces Montero (1996. The results of the research indicate that there are significant differences in favor of service-learning in relation to motivation in general for the completion of the activities and specifically in relation to the utility of the activity as seen at the present moment and in the future, as well as promoting creativity, the interest in the task which includes the perception of the importance of the project, the need to work hard and thoroughly and willingness to face challenges and difficulties in order to achieve the set objective. No significant differences have been observed in relation to the desire to obtain a better grade for completing the activity or need to prove personal value to others, as well as to broaden the information to complete the activity.  

  2. Festival of Curses: A Traditional Crime Control Method In Edo State –Nigeria

    Directory of Open Access Journals (Sweden)

    Rashidi Akanji Okunola

    2016-02-01

    Full Text Available Festivals and ceremonies are part and parcel of African culture, usually in all its pump, merriment and pageantry. However, with the increasing wave of criminal activities in Nigeria especially in Edo state, festivals and ceremonies are being redefined and conceptualized in practice. Only recently a new festival ‘Festival of Curses’ was brought to the fore in combating crime in Edo state. The study therefore seeks to explain the festival as a traditional mechanism in crime control, the nature of the festival, the factors that led to its emergence in the 21st century, the level of acceptance and its impact in reducing criminal activities in the State. The study employed principally secondary literature and in-depth interviews among a cross section of the Bini. Major findings revealed that immediately after the festival of curses, a lot of criminals in the state besieged the Bini Monarch’s Palace to confess their atrocities; and pleaded for forgiveness. There was an overwhelming acceptance of the festival irrespective of the people’s religious affiliations to Christianity and Islam as a result of the potency and sudden drop in crime during the period. The study concludes that the festival should be taken as a mechanism of crime control and policing in Nigeria.

  3. Panel presentation: Should some type of incentive regulation replace traditional methods for regulating LDCs?

    International Nuclear Information System (INIS)

    Costello, K.W.

    1992-01-01

    State regulators should consider new approaches to regulating LDCs. They should seriously look at different incentive systems, even if only as an experiment, to address the major inefficiencies they see plaguing LDCs. Regulators have become more receptive in recent years to applying different incentive systems for historically heavily regulated industries such as the telecommunications and electric industries. In view of prevailing conditions in the natural gas industry, there is no good reason why regulators should not be as receptive to applying incentive systems for LDCs. For gas services offered in competitive markets, regulators should ask themselves whether regulation is necessary any longer. For services still requiring regulation, regulators should explore whether changes in traditional regulation are needed. While some PUCs have undertaken new regulatory practices, the question before them today is whether they should do more; whether, for example, states should accelerate their efforts toward adopting more flexible pricing and other incentive-based regulations or toward considering deregulating selected services. PUCs have different options. They can choose from among a large number of incentive systems. Their choices should hinge upon what they view as major sources of inefficiencies. For example, if uneconomical bypass is perceived as a problem then different price rules might constitute the cornerstone of an incentive-based policy. On the other hand, if excessive purchased-gas costs seem to be a major problem, a PUC may want to consider abolishing the PGA or modifying it in a form that would eliminate the cost-plus component

  4. The Effectiveness of Teaching Methods Used in Graphic Design Pedagogy in Both Analogue and Digital Education Systems

    Science.gov (United States)

    Alhajri, Salman

    2016-01-01

    Purpose: this paper investigates the effectiveness of teaching methods used in graphic design pedagogy in both analogue and digital education systems. Methodology and approach: the paper is based on theoretical study using a qualitative, case study approach. Comparison between the digital teaching methods and traditional teaching methods was…

  5. The application of mixed methods designs to trauma research.

    Science.gov (United States)

    Creswell, John W; Zhang, Wanqing

    2009-12-01

    Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

  6. Soft Computing Methods in Design of Superalloys

    Science.gov (United States)

    Cios, K. J.; Berke, L.; Vary, A.; Sharma, S.

    1996-01-01

    Soft computing techniques of neural networks and genetic algorithms are used in the design of superalloys. The cyclic oxidation attack parameter K(sub a), generated from tests at NASA Lewis Research Center, is modelled as a function of the superalloy chemistry and test temperature using a neural network. This model is then used in conjunction with a genetic algorithm to obtain an optimized superalloy composition resulting in low K(sub a) values.

  7. A comparison of a track shape analysis-based automated slide scanner system with traditional methods

    International Nuclear Information System (INIS)

    Bator, G.; Csordas, A.; Horvath, D.; Somlai, J.; Kovacs, T.

    2015-01-01

    During recent years, CR-39 detector measurements have gained attention due to improvements in image processing methods. An assessment method based on the application of a high-resolution slide scanner and its quality checks is introduced, using commercially available software and hardware. Using the conventional (visual) comparing analysis for 563 detectors, the method was found suitable for high-precision and reliable track analysis. The accuracy of the measurements were not disturbed by any other pseudo-tracks (scratches or contamination) due to the signal shape of the analysis. (author)

  8. Avocado oil extraction processes: method for cold-pressed high-quality edible oil production versus traditional production

    Directory of Open Access Journals (Sweden)

    Giacomo Costagli

    2015-10-01

    Full Text Available Nowadays the avocado fruit (Persea americana Mill. is widely regarded as an important fruit for its nutritional values, as it is rich in vital human nutrients. The avocado fruit is mainly sold fresh on the market, which however trades also a relevant quantity of second-grade fruits with a relatively high oil content. Traditionally, this oil is extracted from dried fruits by means of organic solvents, but a mechanical method is also used in general in locations where drying systems and/or solvent extraction units cannot be installed. These traditional processes yield a grade of oil that needs subsequent refining and is mainly used in the cosmetic industry. In the late 1990s, in New Zeland, a processing company with the collaboration of Alfa Laval began producing cold-pressed avocado oil (CPAO to be sold as edible oil for salads and cooking. Over the last fifteen years, CPAO production has increased in many other countries and has led to an expansion of the market which is set to continue, given the growing interest in highquality and healthy food. Avocado oil like olive oil is extracted from the fruit pulp and in particular shares many principles of the extraction process with extra-vergin olive oil. We conducted a review of traditional and modern extraction methods with particular focus on extraction processes and technology for CPAO production.

  9. Integration of Traditional and E-Learning Methods to Improve Learning Outcomes for Dental Students in Histopathology.

    Science.gov (United States)

    Ariana, Armin; Amin, Moein; Pakneshan, Sahar; Dolan-Evans, Elliot; Lam, Alfred K

    2016-09-01

    Dental students require a basic ability to explain and apply general principles of pathology to systemic, dental, and oral pathology. Although there have been recent advances in electronic and online resources, the academic effectiveness of using self-directed e-learning tools in pathology courses for dental students is unclear. The aim of this study was to determine if blended learning combining e-learning with traditional learning methods of lectures and tutorials would improve students' scores and satisfaction over those who experienced traditional learning alone. Two consecutive cohorts of Bachelor of Dentistry and Oral Health students taking the general pathology course at Griffith University in Australia were compared. The control cohort experienced traditional methods only, while members of the study cohort were also offered self-directed learning materials including online resources and online microscopy classes. Final assessments for the course were used to compare the differences in effectiveness of the intervention, and students' satisfaction with the teaching format was evaluated using questionnaires. On the final course assessments, students in the study cohort had significantly higher scores than students in the control cohort (plearning tools such as virtual microscopy and interactive online resources for delivering pathology instruction can be an effective supplement for developing dental students' competence, confidence, and satisfaction.

  10. SYSTEMATIC PRINCIPLES AND METHODS OF SYMBOLIC APPROACHES IN URBAN DESIGN

    Directory of Open Access Journals (Sweden)

    BULAKH I. V

    2015-12-01

    Full Text Available Formulation of the problem. The low level of expression and personalization of mass architecture of the second half of the twentieth century connected with the spread of industrial technology and even to a greater extent with mechanistic traditionally functional relation to the average person as, abstract consumer architecture. The condition out of the critical situation is focusing on matters aesthetic, artistic understanding and harmonious image creation environment. The problem of increasing architectural and artistic level of architectural and urban planning solutions to overcome the monotony of planning and development, creating aesthetically expressive urban environment does not lose relevance over the past decades. Understanding and acceptance of enigma and dynamic development of cities encourage architects to find new design techniques that are able to provide in the future a reasonable possibility of forming artistic and aesthetic image of the modern city. Purpose. Define and systematize the principles of symbolization architectural and planning images; propose methods symbolism in the architectural planning of image of the urban environment. Conclusion based on analysis of the enhanced concept symbolizing the image of Architecture and Planning, the place, role and symbolization trends at all levels of the urban environment - planning, three-dimensional and improvement of urban areas; first identified the main stages and levels of symbolization (analohyzatsyya, schematization and alehoryzatsiya, their features and characteristics, formulated the basic principles of symbolization architectural and planning of image, namely the principles of communication between figurative analogies, transformation of subsequent circuits, switching allegorical groupings and metamorfizm ultimate goal – symbol birth .

  11. A traditional and a less-invasive robust design: choices in optimizing effort allocation for seabird population studies

    Science.gov (United States)

    Converse, S.J.; Kendall, W.L.; Doherty, P.F.; Naughton, M.B.; Hines, J.E.; Thomson, David L.; Cooch, Evan G.; Conroy, Michael J.

    2009-01-01

    For many animal populations, one or more life stages are not accessible to sampling, and therefore an unobservable state is created. For colonially-breeding populations, this unobservable state could represent the subset of adult breeders that have foregone breeding in a given year. This situation applies to many seabird populations, notably albatrosses, where skipped breeders are either absent from the colony, or are present but difficult to capture or correctly assign to breeding state. Kendall et al. have proposed design strategies for investigations of seabird demography where such temporary emigration occurs, suggesting the use of the robust design to permit the estimation of time-dependent parameters and to increase the precision of estimates from multi-state models. A traditional robust design, where animals are subject to capture multiple times in a sampling season, is feasible in many cases. However, due to concerns that multiple captures per season could cause undue disturbance to animals, Kendall et al. developed a less-invasive robust design (LIRD), where initial captures are followed by an assessment of the ratio of marked-to-unmarked birds in the population or sampled plot. This approach has recently been applied in the Northwestern Hawaiian Islands to populations of Laysan (Phoebastria immutabilis) and black-footed (P. nigripes) albatrosses. In this paper, we outline the LIRD and its application to seabird population studies. We then describe an approach to determining optimal allocation of sampling effort in which we consider a non-robust design option (nRD), and variations of both the traditional robust design (RD), and the LIRD. Variations we considered included the number of secondary sampling occasions for the RD and the amount of total effort allocated to the marked-to-unmarked ratio assessment for the LIRD. We used simulations, informed by early data from the Hawaiian study, to address optimal study design for our example cases. We found that

  12. Demystifying Mixed Methods Research Design: A Review of the Literature

    OpenAIRE

    Gail D. Caruth

    2013-01-01

    Mixed methods research evolved in response to the observed limitations of both quantitative and qualitative designs and is a more complex method. The purpose of this paper was to examine mixed methods research in an attempt to demystify the design thereby allowing those less familiar with its design an opportunity to utilize it in future research. A review of the literature revealed that it has been gaining acceptance among researchers, researchers have begun using mixed methods research, it ...

  13. Bifurcation-free design method of pulse energy converter controllers

    International Nuclear Information System (INIS)

    Kolokolov, Yury; Ustinov, Pavel; Essounbouli, Najib; Hamzaoui, Abdelaziz

    2009-01-01

    In this paper, a design method of pulse energy converter (PEC) controllers is proposed. This method develops a classical frequency domain design, based on the small signal modeling, by means of an addition of a nonlinear dynamics analysis stage. The main idea of the proposed method consists in fact that the PEC controller, designed with an application of the small signal modeling, is tuned after with taking into the consideration an essentially nonlinear nature of the PEC that makes it possible to avoid bifurcation phenomena in the PEC dynamics at the design stage (bifurcation-free design). Also application of the proposed method allows an improvement of the designed controller performance. The application of this bifurcation-free design method is demonstrated on an example of the controller design of direct current-direct current (DC-DC) buck converter with an input electromagnetic interference filter.

  14. Comprehensive evaluation method in application of nuclear DCS product design

    International Nuclear Information System (INIS)

    Wang Weixin; Zhao Zhemin; Shi Yingbin

    2014-01-01

    In order to select the best design proposal in short time, the TOPSIS comprehensive evaluation method in the nuclear power plant DCS product design was introduced. It can intuitively show the different design proposals good or not good by data and shorten the time of the design proposal optimization. The design proposal selected by this method will be more reasonable and has good comprehensive performance indexes. The TOPSIS comprehensive evaluation method achieves good result in one of the nuclear power plant DCS cabinet design proposal optimization. (authors)

  15. Running and Metabolic Demands of Elite Rugby Union Assessed Using Traditional, Metabolic Power, and Heart Rate Monitoring Methods

    Directory of Open Access Journals (Sweden)

    Romain Dubois, Thierry Paillard, Mark Lyons, David McGrath, Olivier Maurelli, Jacques Prioux

    2017-03-01

    Full Text Available The aims of this study were (1 to analyze elite rugby union game demands using 3 different approaches: traditional, metabolic and heart rate-based methods (2 to explore the relationship between these methods and (3 to explore positional differences between the backs and forwards players. Time motion analysis and game demands of fourteen professional players (24.1 ± 3.4 y, over 5 European challenge cup games, were analyzed. Thresholds of 14.4 km·h-1, 20 W.kg-1 and 85% of maximal heart rate (HRmax were set for high-intensity efforts across the three methods. The mean % of HRmax was 80.6 ± 4.3 % while 42.2 ± 16.5% of game time was spent above 85% of HRmax with no significant differences between the forwards and the backs. Our findings also show that the backs cover greater distances at high-speed than forwards (% difference: +35.2 ± 6.6%; p<0.01 while the forwards cover more distance than the backs (+26.8 ± 5.7%; p<0.05 in moderate-speed zone (10-14.4 km·h-1. However, no significant difference in high-metabolic power distance was found between the backs and forwards. Indeed, the high-metabolic power distances were greater than high-speed running distances of 24.8 ± 17.1% for the backs, and 53.4 ± 16.0% for the forwards with a significant difference (+29.6 ± 6.0% for the forwards; p<0.001 between the two groups. Nevertheless, nearly perfect correlations were found between the total distance assessed using the traditional approach and the metabolic power approach (r = 0.98. Furthermore, there is a strong association (r = 0.93 between the high-speed running distance (assessed using the traditional approach and the high-metabolic power distance. The HR monitoring methods demonstrate clearly the high physiological demands of professional rugby games. The traditional and the metabolic-power approaches shows a close correlation concerning their relative values, nevertheless the difference in absolute values especially for the high

  16. [Methods of traditional chinese medicine in the treatment of patients with interstitial cystitis/bladder pain syndrome].

    Science.gov (United States)

    Ignashov, A Yu; Deng, B; Kuzmin, I V; Slesarevskaya, M N

    2018-03-01

    In recent years, there has been an increasing interest in alternative (complementary) treatments of interstitial cystitis/bladder pain syndrome (IC/BPS). This is due both to the high incidence of IC/BPS and to a lack of effectiveness of conventional treatments. One of the directions of alternative therapies is a traditional Chinese medicine using a special diet, various animal and plant-derived medicines, breathing exercises and acupuncture. This review analyzes the accumulated experience in using traditional Chinese medicine in the treatment of patients with IC/BPS. The presented data indicate that these methods appear to be promising, since they are effective in a significant number of patients, lead to an improvement in their quality of life, are non-invasive and well tolerated. However, due to the lack of clinical studies, the efficacy of this treatment modalities needs to be confirmed.

  17. Comparing the Effects of Simulation-Based and Traditional Teaching Methods on the Critical Thinking Abilities and Self-Confidence of Nursing Students.

    Science.gov (United States)

    AlAmrani, Mashael-Hasan; AlAmmar, Kamila-Ahmad; AlQahtani, Sarah-Saad; Salem, Olfat A

    2017-10-10

    Critical thinking and self-confidence are imperative to success in clinical practice. Educators should use teaching strategies that will help students enhance their critical thinking and self-confidence in complex content such as electrocardiogram interpretation. Therefore, teaching electrocardiogram interpretation to students is important for nurse educators. This study compares the effect of simulation-based and traditional teaching methods on the critical thinking and self-confidence of students during electrocardiogram interpretation sessions. Thirty undergraduate nursing students volunteered to participate in this study. The participants were divided into intervention and control groups, which were taught respectively using the simulation-based and traditional teaching programs. All of the participants were asked to complete the study instrumentpretest and posttest to measure their critical thinking and self-confidence. Improvement was observed in the control and experimental groups with respect to critical thinking and self-confidence, as evidenced by the results of the paired samples t test and the Wilcoxon signed-rank test (p .05). This study evaluated an innovative simulation-based teaching method for nurses. No significant differences in outcomes were identified between the simulator-based and traditional teaching methods, indicating that well-implemented educational programs that use either teaching method effectively promote critical thinking and self-confidence in nursing students. Nurse educators are encouraged to design educational plans with clear objectives to improve the critical thinking and self-confidence of their students. Future research should compare the effects of several teaching sessions using each method in a larger sample.

  18. Evalution and cost comparison of anti-siltation systems and traditional dredging methods

    OpenAIRE

    Velasco, Victor V.

    2000-01-01

    CIVINS (Civilian Institutions) Thesis document Maintaining the design depth of ship servicing facilities is a challenging task. Dredging technology has improved significantly in the past few decades and this should have driven the cost downwards. However, increased environmental awareness has placed limitations on how dredge spoils are handled, transported and disposed of and has effectively increased the costs of dredging operations. The United States Army Corps of Engineers and the Naval...

  19. Ethics, Collaboration, and Presentation Methods for Local and Traditional Knowledge for Understanding Arctic Change

    Science.gov (United States)

    Parsons, M. A.; Gearheard, S.; McNeave, C.

    2009-12-01

    Local and traditional knowledge (LTK) provides rich information about the Arctic environment at spatial and temporal scales that scientific knowledge often does not have access to (e.g. localized observations of fine-scale ecological change potentially from many different communities, or local sea ice and conditions prior to 1950s ice charts and 1970s satellite records). Community-based observations and monitoring are an opportunity for Arctic residents to provide ‘frontline’ observations and measurements that are an early warning system for Arctic change. The Exchange for Local Observations and Knowledge of the Arctic (ELOKA) was established in response to the growing number of community-based and community-oriented research and observation projects in the Arctic. ELOKA provides data management and user support to facilitate the collection, preservation, exchange, and use of local observations and knowledge. Managing these data presents unique ethical challenges in terms of appropriate use of rare human knowledge and ensuring that knowledge is not lost from the local communities and not exploited in ways antithetical to community culture and desires. Local Arctic residents must be engaged as true collaborative partners while respecting their perspectives, which may vary substantially from a western science perspective. At the same time, we seek to derive scientific meaning from the local knowledge that can be used in conjunction with quantitative science data. This creates new challenges in terms of data presentation, knowledge representations, and basic issues of metadata. This presentation reviews these challenges, some initial approaches to addressing them, and overall lessons learned and future directions.

  20. Traditional method of fish treatment, microbial count and palatability studies on spoiled fish

    Directory of Open Access Journals (Sweden)

    Abd Aziz, N. A.

    2013-01-01

    Full Text Available Aims: To evaluate the microbial count and palatability acceptance of spoiled fish after treatment with traditionally used naturalsolution.Methodology and results: To compare microbial count of spoiled fish before and after treatment with natural solution practicedby local people in Malaysia, 10 g of spoiled fish was respectively rinsed with 100 mL of 0.1% of natural solution such as Averrhoabilimbi extract, rice rinsed water, rice vinegar, Citrus aurantifolia extract, salt, flour, and Tamarindus indica extract. Flesh of fishrinsed with rice vinegar was found to be able to reduce microbial count (CFU/mL = 0.37 X 107 more than 4.5 times whencompared to spoiled fish (CFU/mL=1.67x 107. Spoiled fish that was treated with rice vinegar was prepared into a cutlet and fried.The cutlet was subjected to palatability acceptance study by a group of residents in Palm Court Condominium, Brickfields, KualaLumpur. The palatability study from the Cronbach alpha shown that the taste have the reliability of 0.802, the aroma has thereliability of 0.888, colour with the reliability of 0.772, texture or mouth feel have reliability of 0.840 and physical structure of thecutlet is 0.829.Conclusion, significance and impact of study: Treatment of spoiled fish using rice vinegar as practice by local peopletraditionally shown a significant reduction in microbial count and the vinegar-treated fish could be developed into a product that issafe and acceptable by the consumer.

  1. Software Design Methods for Real-Time Systems

    Science.gov (United States)

    1989-12-01

    This module describes the concepts and methods used in the software design of real time systems . It outlines the characteristics of real time systems , describes...the role of software design in real time system development, surveys and compares some software design methods for real - time systems , and

  2. Replication protocol analysis: a method for the study of real-world design thinking

    DEFF Research Database (Denmark)

    Galle, Per; Kovacs, L. B.

    1996-01-01

    ’ is refined into a method called ‘replication protocol analysis’ (RPA), and discussed from a methodological perspective of design research. It is argued that for the study of real-world design thinking this method offers distinct advantages over traditionaldesign protocol analysis’, which seeks to capture......Given the brief of an architectural competition on site planning, and the design awarded the first prize, the first author (trained as an architect but not a participant in the competition) produced a line of reasoning that might have led from brief to design. In the paper, such ‘design replication...... the designer’s authentic line of reasoning. To illustrate how RPA can be used, the site planning case is briefly presented, and part of the replicated line of reasoning analysed. One result of the analysis is a glimpse of a ‘logic of design’; another is an insight which sheds new light on Darke’s classical...

  3. Design methods for high temperature power plant structures

    International Nuclear Information System (INIS)

    Townley, C.H.A.

    1984-01-01

    The subject is discussed under the headings: introduction (scope of paper - reviews of design methods and design criteria currently in use for both nuclear and fossil fuelled power plant; examples chosen are (a) BS 1113, representative of design codes employed for power station boiler plant; (b) ASME Code Case N47, which is being developed for high temperature nuclear reactors, especially the liquid metal fast breeder reactor); design codes for power station boilers; Code Case N47 (design in the absence of thermal shock and thermal fatigue; design against cyclic loading at high temperature; further research in support of high temperature design methods and criteria for LMFBRs); concluding remarks. (U.K.)

  4. The Triton: Design concepts and methods

    Science.gov (United States)

    Meholic, Greg; Singer, Michael; Vanryn, Percy; Brown, Rhonda; Tella, Gustavo; Harvey, Bob

    1992-01-01

    During the design of the C & P Aerospace Triton, a few problems were encountered that necessitated changes in the configuration. After the initial concept phase, the aspect ratio was increased from 7 to 7.6 to produce a greater lift to drag ratio (L/D = 13) which satisfied the horsepower requirements (118 hp using the Lycoming O-235 engine). The initial concept had a wing planform area of 134 sq. ft. Detailed wing sizing analysis enlarged the planform area to 150 sq. ft., without changing its layout or location. The most significant changes, however, were made just prior to inboard profile design. The fuselage external diameter was reduced from 54 to 50 inches to reduce drag to meet the desired cruise speed of 120 knots. Also, the nose was extended 6 inches to accommodate landing gear placement. Without the extension, the nosewheel received an unacceptable percentage (25 percent) of the landing weight. The final change in the configuration was made in accordance with the stability and control analysis. In order to reduce the static margin from 20 to 13 percent, the horizontal tail area was reduced from 32.02 to 25.0 sq. ft. The Triton meets all the specifications set forth in the design criteria. If time permitted another iteration of the calculations, two significant changes would be made. The vertical stabilizer area would be reduced to decrease the aircraft lateral stability slope since the current value was too high in relation to the directional stability slope. Also, the aileron size would be decreased to reduce the roll rate below the current 106 deg/second. Doing so would allow greater flap area (increasing CL(sub max)) and thus reduce the overall wing area. C & P would also recalculate the horsepower and drag values to further validate the 120 knot cruising speed.

  5. Use of traditional and modern contraceptives among childbearing women: findings from a mixed methods study in two southwestern Nigerian states.

    Science.gov (United States)

    Ajayi, Anthony Idowu; Adeniyi, Oladele Vincent; Akpan, Wilson

    2018-05-09

    Contraceptive use has numerous health benefits such as preventing unplanned pregnancies, ensuring optimum spacing between births, reducing maternal and child mortality, and improving the lives of women and children in general. This study examines the level of contraceptive use, its determinants, reasons for non-use of contraception among women in the reproductive age group (18-49 years) in two southwestern Nigerian states. The study adopted an interviewer-administered questionnaire to collect data from 809 participants selected using a 3-stage cluster random sampling technique. We also conducted 46 in-depth interviews. In order to investigate the association between the socio-demographic variables and use of contraceptive methods, we estimated the binary logistic regression models. The findings indicated that knowledge of any methods of contraception was almost universal among the participants. The rates of ever use and current use of contraception was 80 and 66.6%, respectively. However, only 43.9% of the participants had ever used any modern contraceptive methods, considered to be more reliable. The fear of side effects of modern contraceptive methods drove women to rely on less effective traditional methods (withdrawal and rhythm methods). Some women employed crude and unproven contraceptive methods to prevent pregnancies. Our findings show that the rate of contraceptive use was high in the study setting. However, many women chose less effective traditional contraceptive methods over more effective modern contraceptive methods due to fear of side effects of the latter. Patient education on the various options of modern contraceptives, their side effects and management would be crucial towards expanding the family planning services in the study setting.

  6. Collaborative Design Method Holistic Participation (MHP)

    NARCIS (Netherlands)

    Proveniers, A.G.W.J.; Schmid, P.; Schmid-Pa'l, G.; Klucznik-Toro, A.; Csepe, A.; Kwiatkowska-Ciotucha, D.

    2009-01-01

    Almost by definition, innovative, sustainable, peaceful economics, technologies, derived services and products have to be developed in an interdisciplinary way: all kinds of bits and parts from less sustainable methods, technologies, services and products have to be reshuffled in new innovative,

  7. Machine cost analysis using the traditional machine-rate method and ChargeOut!

    Science.gov (United States)

    E. M. (Ted) Bilek

    2009-01-01

    Forestry operations require ever more use of expensive capital equipment. Mechanization is frequently necessary to perform cost-effective and safe operations. Increased capital should mean more sophisticated capital costing methodologies. However the machine rate method, which is the costing methodology most frequently used, dates back to 1942. CHARGEOUT!, a recently...

  8. Combining traditional dietary assessment methods with novel metabolomics techniques : present efforts by the Food Biomarker Alliance

    NARCIS (Netherlands)

    Brouwer-Brolsma, Elske M.; Brennan, Lorraine; Drevon, Christian A.; van Kranen, Henk; Manach, Claudine; Dragsted, Lars Ove; Roche, Helen M.; Andres-Lacueva, Cristina; Bakker, Stephan J. L.; Bouwman, Jildau; Capozzi, Francesco; De Saeger, Sarah; Gundersen, Thomas E.; Kolehmainen, Marjukka; Kulling, Sabine E.; Landberg, Rikard; Linseisen, Jakob; Mattivi, Fulvio; Mensink, Ronald P.; Scaccini, Cristina; Skurk, Thomas; Tetens, Inge; Vergeres, Guy; Wishart, David S.; Scalbert, Augustin; Feskens, Edith J. M.

    FFQ, food diaries and 24 h recall methods represent the most commonly used dietary assessment tools in human studies on nutrition and health, but food intake biomarkers are assumed to provide a more objective reflection of intake. Unfortunately, very few of these biomarkers are sufficiently

  9. Developing a Pictorial Sisterhood Method in collaboration with illiterate Maasai traditional birth attendants in northern Tanzania

    NARCIS (Netherlands)

    Roggeveen, Yadira; Schreuder, Renske; Zweekhorst, Marjolein; Manyama, Mange; Hatfield, Jennifer; Scheele, Fedde; van Roosmalen, Jos

    2016-01-01

    Objective To study whether data on maternal mortality can be gathered while maintaining local ownership of data in a pastoralist setting where a scarcity of data sources and a culture of silence around maternal death amplifies limited awareness of the magnitude of maternal mortality. Methods As part

  10. Seismic design method of free standing rack

    International Nuclear Information System (INIS)

    Taniguchi, Katsuhiko; Okuno, Daisaku; Iwasaki, Akihisa; Nekomoto, Yoshitsugu; Matsuoka, Toshihiro

    2013-01-01

    For high earthquake resistance and ease of installation, free standing racks which are not anchored to the pool floor or walls has been adopted in many countries. Under the earthquake, the response of the free standing rack is highly nonlinear and involves a complex combination of motions (sliding, rocking, twisting, and turning) and impacts between the fuel assemblies and the fuel cell walls, rack-to-rack, and the pit floor and rack pedestals. We carried out seismic experiments on the full-scale rack model in water and dry conditions to obtain the fundamental data about free standing rack (sliding, rocking and turning motions). We have developed the nonlinear dynamic analysis method to predict seismic response for the free standing rack utilizing the full-scale test result and verified the analysis evaluation method of the rack by comparison of test result. (author)

  11. 78 FR 67360 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Five New Equivalent Methods

    Science.gov (United States)

    2013-11-12

    ... Methods: Designation of Five New Equivalent Methods AGENCY: Office of Research and Development; Environmental Protection Agency (EPA). ACTION: Notice of the designation of five new equivalent methods for...) has designated, in accordance with 40 CFR Part 53, five new equivalent methods, one for measuring...

  12. Distributed optimization for systems design : an augmented Lagrangian coordination method

    NARCIS (Netherlands)

    Tosserams, S.

    2008-01-01

    This thesis presents a coordination method for the distributed design optimization of engineering systems. The design of advanced engineering systems such as aircrafts, automated distribution centers, and microelectromechanical systems (MEMS) involves multiple components that together realize the

  13. Evaluation of Information Requirements of Reliability Methods in Engineering Design

    DEFF Research Database (Denmark)

    Marini, Vinicius Kaster; Restrepo-Giraldo, John Dairo; Ahmed-Kristensen, Saeema

    2010-01-01

    This paper aims to characterize the information needed to perform methods for robustness and reliability, and verify their applicability to early design stages. Several methods were evaluated on their support to synthesis in engineering design. Of those methods, FMEA, FTA and HAZOP were selected...

  14. A Review of Design Optimization Methods for Electrical Machines

    Directory of Open Access Journals (Sweden)

    Gang Lei

    2017-11-01

    Full Text Available Electrical machines are the hearts of many appliances, industrial equipment and systems. In the context of global sustainability, they must fulfill various requirements, not only physically and technologically but also environmentally. Therefore, their design optimization process becomes more and more complex as more engineering disciplines/domains and constraints are involved, such as electromagnetics, structural mechanics and heat transfer. This paper aims to present a review of the design optimization methods for electrical machines, including design analysis methods and models, optimization models, algorithms and methods/strategies. Several efficient optimization methods/strategies are highlighted with comments, including surrogate-model based and multi-level optimization methods. In addition, two promising and challenging topics in both academic and industrial communities are discussed, and two novel optimization methods are introduced for advanced design optimization of electrical machines. First, a system-level design optimization method is introduced for the development of advanced electric drive systems. Second, a robust design optimization method based on the design for six-sigma technique is introduced for high-quality manufacturing of electrical machines in production. Meanwhile, a proposal is presented for the development of a robust design optimization service based on industrial big data and cloud computing services. Finally, five future directions are proposed, including smart design optimization method for future intelligent design and production of electrical machines.

  15. Comparison study between traditional and finite element methods for slopes under heavy rainfall

    Directory of Open Access Journals (Sweden)

    M. Rabie

    2014-08-01

    Moreover, slope stability concerning rainfall and infiltration is analyzed. Specially, two kinds of infiltrations (saturated and unsaturated are considered. Many slopes become saturated during periods of intense rainfall or snowmelt, with the water table rising to the ground surface, and water flowing essentially parallel to the direction of the “slope” and “Influence” of the change in shear strength, density, pore-water pressure and seepage force in soil slices on the slope stability is explained. Finally, it is found that classical limit equilibrium methods are highly conservative compared to the finite element approach. For assessment the factor of safety for slope using the later technique, no assumption needs to be made in advance about the shape or location of the failure surface, slice side forces and their directions. This document outlines the capabilities of the finite element method in the analysis of slope stability problems.

  16. The design and validation of a hybrid digital-signal-processing plug-in for traditional cochlear implant speech processors.

    Science.gov (United States)

    Hajiaghababa, Fatemeh; Marateb, Hamid R; Kermani, Saeed

    2018-06-01

    Cochlear implants (CIs) are electronic devices restoring partial hearing to deaf individuals with profound hearing loss. In this paper, a new plug-in for traditional IIR filter-banks (FBs) is presented for cochlear implants based on wavelet neural networks (WNNs). Having provided such a plug-in for commercially available CIs, it is possible not only to use available hardware in the market but also to optimize their performance compared with the-state-of-the-art. An online database of Dutch diphone perception was used in our study. The weights of the WNNs were tuned using particle swarm optimization (PSO) on a training set (speech-shaped noise (SSN) of 2 dB SNR), while its performance was assessed on a test set in terms of objective and composite measures in the hold-out validation framework. The cost function was defined based on the combination of mean square error (MSE), short‑time objective intelligibility (STOI) criteria on the training set. Variety of performance indices were used including segmental signal- to -noise ratio (SNRseg), MSE, STOI, log-likelihood ratio (LLR), weighted spectral slope (WSS), and composite measures C sig , C bak and C ovl . Meanwhile, the following CI speech processing techniques were used for comparison: traditional FBs, dual resonance nonlinear (DRNL) and simple dual path nonlinear (SPDN) models. The average SNRseg, MSE, and LLR values for the WNN in the entire data set were 2.496 ± 2.794, 0.086 ± 0.025 and 2.323 ± 0.281, respectively. The proposed method significantly improved MSE, SNR, SNRseg, LLR, C sig C bak and C ovl compared with the other three methods (repeated-measures analysis of variance (ANOVA); P < 0.05). The average running time of the proposed algorithm (written in Matlab R2013a) on the training and test sets for each consonant or vowel on an Intel dual-core 2.10 GHz CPU with 2GB of RAM was 9.91 ± 0.87 (s) and 0.19 ± 0.01 (s), respectively. The proposed algorithm is accurate and

  17. A Systematic Optimization Design Method for Complex Mechatronic Products Design and Development

    Directory of Open Access Journals (Sweden)

    Jie Jiang

    2018-01-01

    Full Text Available Designing a complex mechatronic product involves multiple design variables, objectives, constraints, and evaluation criteria as well as their nonlinearly coupled relationships. The design space can be very big consisting of many functional design parameters, structural design parameters, and behavioral design (or running performances parameters. Given a big design space and inexplicit relations among them, how to design a product optimally in an optimization design process is a challenging research problem. In this paper, we propose a systematic optimization design method based on design space reduction and surrogate modelling techniques. This method firstly identifies key design parameters from a very big design space to reduce the design space, secondly uses the identified key design parameters to establish a system surrogate model based on data-driven modelling principles for optimization design, and thirdly utilizes the multiobjective optimization techniques to achieve an optimal design of a product in the reduced design space. This method has been tested with a high-speed train design. With comparison to others, the research results show that this method is practical and useful for optimally designing complex mechatronic products.

  18. A better way to teach knot tying: a randomized controlled trial comparing the kinesthetic and traditional methods.

    Science.gov (United States)

    Huang, Emily; Chern, Hueylan; O'Sullivan, Patricia; Cook, Brian; McDonald, Erik; Palmer, Barnard; Liu, Terrence; Kim, Edward

    2014-10-01

    Knot tying is a fundamental and crucial surgical skill. We developed a kinesthetic pedagogical approach that increases precision and economy of motion by explicitly teaching suture-handling maneuvers and studied its effects on novice performance. Seventy-four first-year medical students were randomized to learn knot tying via either the traditional or the novel "kinesthetic" method. After 1 week of independent practice, students were videotaped performing 4 tying tasks. Three raters scored deidentified videos using a validated visual analog scale. The groups were compared using analysis of covariance with practice knots as a covariate and visual analog scale score (range, 0 to 100) as the dependent variable. Partial eta-square was calculated to indicate effect size. Overall rater reliability was .92. The kinesthetic group scored significantly higher than the traditional group for individual tasks and overall, controlling for practice (all P kinesthetic overall mean was 64.15 (standard deviation = 16.72) vs traditional 46.31 (standard deviation = 16.20; P kinesthetic suture handling substantively improved performance on knot tying. We believe this effect can be extrapolated to more complex surgical skills. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. REGARDING A METHOD OF PERFORMING ON THE VIOLIN IN TRADITIONAL MUSIC

    Directory of Open Access Journals (Sweden)

    MIRONENCO IAROSLAV

    2016-06-01

    Full Text Available Following a field study in the village of Lozova, Străşeni, aimed at identifying the variants of a folk song recorded by I. Mironenko from an informant living in the village of Thamaha, North Caucasus — Russia, a village inhabited by Moldovans, the musicologist discovered a fiddler who demonstrated him a specific process of executation on the violin. This method is representative of an advanced level of interpretation on the violin.

  20. [Study on two preparation methods for beta-CD inclusion compound of four traditional Chinese medicine volatile oils].

    Science.gov (United States)

    Li, Hailiang; Cui, Xiaoli; Tong, Yan; Gong, Muxin

    2012-04-01

    To compare inclusion effects and process conditions of two preparation methods-colloid mill and saturated solution-for beta-CD inclusion compound of four traditional Chinese medicine volatile oils and study the relationship between each process condition and volatile oil physical properties and the regularity of selective inclusion of volatile oil components. Volatile oils from Nardostachyos Radix et Rhizoma, Amomi Fructus, Zingiberis Rhizoma and Angelicaesinensis Radix were prepared using two methods in the orthogonal test. These inclusion compounds by optimized processes were assessed and compared by such methods as TLC, IR and scanning electron microscope. Inclusion oils were extracted by steam distillation, and the components found before and after inclusion were analyzed by GC-MS. Analysis showed that new inclusion compounds, but inclusion compounds prepared by the two processes had differences to some extent. The colloid mill method showed a better inclusion effect than the saturated solution method, indicating that their process conditions had relations with volatile oil physical properties. There were differences in the inclusion selectivity of components between each other. The colloid mill method for inclusion preparation is more suitable for industrial requirements. To prepare volatile oil inclusion compounds with heavy gravity and high refractive index, the colloid mill method needs longer time and more water, while the saturated solution method requires higher temperature and more beta-cyclodextrin. The inclusion complex prepared with the colloid mill method contains extended molecular weight chemical composition, but the kinds of components are reduced.

  1. Practical implications of procedures developed in IDEA project - Comparison with traditional methods

    International Nuclear Information System (INIS)

    Andrasi, A.; Bouvier, C.; Brandl, A.; De Carlan, L.; Fischer, H.; Franck, D.; Hoellriegl, V.; Li, W. B.; Oeh, U.; Ritt, J.; Roth, P.; Schlagbauer, M.; Schmitzer, Ch; Wahl, W.; Zombori, P.

    2007-01-01

    The idea of the IDEA project aimed to improve assessment of incorporated radionuclides through developments of more reliable and possibly faster in vivo and bioassay monitoring techniques and making use of such enhancements for improvements in routine monitoring. In direct in vivo monitoring technique the optimum choice of the detectors to be applied for different monitoring tasks has been investigated in terms of material, size and background in order to improve conditions namely to increase counting efficiency and reduce background. Detailed studies have been performed to investigate the manifold advantageous applications and capabilities of numerical simulation method for the calibration and optimisation of in vivo counting systems. This calibration method can be advantageously applied especially in the measurement of low-energy photon emitting radionuclides, where individual variability is a significant source of uncertainty. In bioassay measurements the use of inductively coupled plasma mass spectrometry (ICP-MS) can improve considerably both the measurement speed and the lower limit of detection currently achievable with alpha spectrometry for long-lived radionuclides. The work carried out in this project provided detailed guidelines for optimum performance of the technique of ICP-MS applied mainly for the determination of uranium and thorium nuclides in the urine including sampling procedure, operational parameters of the instruments and interpretation of the measured data. The paper demonstrates the main advantages of investigated techniques in comparison with the performances of methods commonly applied in routine monitoring practice. (authors)

  2. An object-oriented class design for the generalized finite element method programming

    Directory of Open Access Journals (Sweden)

    Dorival Piedade Neto

    Full Text Available The Generalized Finite Element Method (GFEM is a numerical method based on the Finite Element Method (FEM, presenting as its main feature the possibility of improving the solution by means of local enrichment functions. In spite of its advantages, the method demands a complex data structure, which can be especially benefited by the Object-Oriented Programming (OOP. Even though the OOP for the traditional FEM has been extensively described in the technical literature, specific design issues related to the GFEM are yet little discussed and not clearly defined. In the present article it is described an Object-Oriented (OO class design for the GFEM, aiming to achieve a computational code that presents a flexible class structure, circumventing the difficulties associated to the method characteristics. The proposed design is evaluated by means of some numerical examples, computed using a code implemented in Python programming language.

  3. Mixed Methods Designs for Sports Medicine Research.

    Science.gov (United States)

    Kay, Melissa C; Kucera, Kristen L

    2018-07-01

    Mixed methods research is a relatively new approach in the field of sports medicine, where the benefits of qualitative and quantitative research are combined while offsetting the other's flaws. Despite its known and successful use in other populations, it has been used minimally in sports medicine, including studies of the clinician perspective, concussion, and patient outcomes. Therefore, there is a need for this approach to be applied in other topic areas not easily addressed by one type of research approach in isolation, such as the retirement from sport, effects of and return from injury, and catastrophic injury. Copyright © 2018 Elsevier Inc. All rights reserved.

  4. Integrated Building Energy Design of a Danish Office Building Based on Monte Carlo Simulation Method

    DEFF Research Database (Denmark)

    Sørensen, Mathias Juul; Myhre, Sindre Hammer; Hansen, Kasper Kingo

    2017-01-01

    The focus on reducing buildings energy consumption is gradually increasing, and the optimization of a building’s performance and maximizing its potential leads to great challenges between architects and engineers. In this study, we collaborate with a group of architects on a design project of a new...... office building located in Aarhus, Denmark. Building geometry, floor plans and employee schedules were obtained from the architects which is the basis for this study. This study aims to simplify the iterative design process that is based on the traditional trial and error method in the late design phases...

  5. Formulation of an aloe-based product according to Iranian traditional medicine and development of its analysis method.

    Science.gov (United States)

    Moein, Elham; Hajimehdipoor, Homa; Toliyat, Tayebeh; Choopani, Rasool; Hamzeloo-Moghadam, Maryam

    2017-08-29

    Currently, people are more interested to traditional medicine. The traditional formulations should be converted to modern drug delivery systems to be more acceptable for the patients. In the present investigation, a poly herbal medicine "Ayarij-e-Faiqra" (AF) based on Iranian traditional medicine (ITM) has been formulated and its quality control parameters have been developed. The main ingredients of AF including barks of Cinnamomum zeylanicum Blume and Cinnamomum cassia J. Presl, the rhizomes of Nardostachys jatamansi DC., the fruits of Piper cubeba L.f., the flowers of Rosa damascena Herrm., the oleo gum resin of Pistacia terebinthus L. and Aloe spp. dried juice were powdered and used for preparing seven tablet formulations of the herbal mixture. Flowability of the different formulated powders was examined and the best formulations were selected (F6&F7). The tablets were prepared from the selected formulations compared according to the physical characteristics and finally, F7 was selected and coated. Physicochemical characters of core and coated AF tablets were determined and the HPLC method for quantitation of aloin as a marker of tablets was selected and verified according to selectivity, linearity, precision, recovery, LOD and LOQ. The results showed that core and coated AF tablets were in agreement with USP requirements for herbal drugs. They had acceptable appearance, disintegration time, friability, hardness, dissolution behavior, weight variation and content uniformity. The amount of aloin in tablets was found 123.1 mg/tab. The HPLC method for aloin determination in AF tablets was verified according to selectivity, linearity (5-500 μg/ml, r 2 :0.9999), precision (RSD: 1.62%), recovery (108.0%), LOD & LOQ (0.0053 & 0.0161 μg/ml). The formulated tablets could be a good substitute for powder and capsules of AF in ITM clinics with a feasible and precise method for its quality control. Ayarij-e-Faiqra formulation.

  6. Methods for very high temperature design

    International Nuclear Information System (INIS)

    Blass, J.J.; Corum, J.M.; Chang, S.J.

    1989-01-01

    Design rules and procedures for high-temperature, gas-cooled reactor components are being formulated as an ASME Boiler and Pressure Vessel Code Case. A draft of the Case, patterned after Code Case N-47, and limited to Inconel 617 and temperatures of 982/degree/C (1800/degree/F) or less, will be completed in 1989 for consideration by relevant Code committees. The purpose of this paper is to provide a synopsis of the significant differences between the draft Case and N-47, and to provide more complete accounts of the development of allowable stress and stress rupture values and the development of isochronous stress vs strain curves, in both of which Oak Ridge National Laboratory (ORNL) played a principal role. The isochronous curves, which represent average behavior for many heats of Inconel 617, were based in part on a unified constitutive model developed at ORNL. Details are also provided of this model of inelastic deformation behavior, which does not distinguish between rate-dependent plasticity and time-dependent creep, along with comparisons between calculated and observed results of tests conducted on a typical heat of Inconel 617 by the General Electric Company for the Department of Energy. 4 refs., 15 figs., 1 tab

  7. Instrument design optimization with computational methods

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Michael H. [Old Dominion Univ., Norfolk, VA (United States)

    2017-08-01

    Using Finite Element Analysis to approximate the solution of differential equations, two different instruments in experimental Hall C at the Thomas Jefferson National Accelerator Facility are analyzed. The time dependence of density uctuations from the liquid hydrogen (LH2) target used in the Qweak experiment (2011-2012) are studied with Computational Fluid Dynamics (CFD) and the simulation results compared to data from the experiment. The 2.5 kW liquid hydrogen target was the highest power LH2 target in the world and the first to be designed with CFD at Jefferson Lab. The first complete magnetic field simulation of the Super High Momentum Spectrometer (SHMS) is presented with a focus on primary electron beam deflection downstream of the target. The SHMS consists of a superconducting horizontal bending magnet (HB) and three superconducting quadrupole magnets. The HB allows particles scattered at an angle of 5:5 deg to the beam line to be steered into the quadrupole magnets which make up the optics of the spectrometer. Without mitigation, remnant fields from the SHMS may steer the unscattered beam outside of the acceptable envelope on the beam dump and limit beam operations at small scattering angles. A solution is proposed using optimal placement of a minimal amount of shielding iron around the beam line.

  8. A flexible layout design method for passive micromixers.

    Science.gov (United States)

    Deng, Yongbo; Liu, Zhenyu; Zhang, Ping; Liu, Yongshun; Gao, Qingyong; Wu, Yihui

    2012-10-01

    This paper discusses a flexible layout design method of passive micromixers based on the topology optimization of fluidic flows. Being different from the trial and error method, this method obtains the detailed layout of a passive micromixer according to the desired mixing performance by solving a topology optimization problem. Therefore, the dependence on the experience of the designer is weaken, when this method is used to design a passive micromixer with acceptable mixing performance. Several design disciplines for the passive micromixers are considered to demonstrate the flexibility of the layout design method for passive micromixers. These design disciplines include the approximation of the real 3D micromixer, the manufacturing feasibility, the spacial periodic design, and effects of the Péclet number and Reynolds number on the designs obtained by this layout design method. The capability of this design method is validated by several comparisons performed between the obtained layouts and the optimized designs in the recently published literatures, where the values of the mixing measurement is improved up to 40.4% for one cycle of the micromixer.

  9. How to Construct a Mixed Methods Research Design.

    Science.gov (United States)

    Schoonenboom, Judith; Johnson, R Burke

    2017-01-01

    This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

  10. The synthesis method for design of electron flow sources

    Science.gov (United States)

    Alexahin, Yu I.; Molodozhenzev, A. Yu

    1997-01-01

    The synthesis method to design a relativistic magnetically - focused beam source is described in this paper. It allows to find a shape of electrodes necessary to produce laminar space charge flows. Electron guns with shielded cathodes designed with this method were analyzed using the EGUN code. The obtained results have shown the coincidence of the synthesis and analysis calculations [1]. This method of electron gun calculation may be applied for immersed electron flows - of interest for the EBIS electron gun design.

  11. HPLC Method for Simultaneous Quantitative Detection of Quercetin and Curcuminoids in Traditional Chinese Medicines

    Directory of Open Access Journals (Sweden)

    Lee Fung Ang

    2014-12-01

    Full Text Available Objectives: Quercetin and curcuminoids are important bioactive compounds found in many herbs. Previously reported high performance liquid chromatography ultraviolet (HPLC-UV methods for the detection of quercetin and curcuminoids have several disadvantages, including unsatisfactory separation times and lack of validation according the standard guidelines of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use. Methods: A rapid, specific, reversed phase, HPLC-UV method with an isocratic elution of acetonitrile and 2% v/v acetic acid (40% : 60% v/v (pH 2.6 at a flow rate of 1.3 mL/minutes, a column temperature of 35°C, and ultraviolet (UV detection at 370 nm was developed. The method was validated and applied to the quantification of different types of market available Chinese medicine extracts, pills and tablets. Results: The method allowed simultaneous determination of quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin in the concentration ranges of 0.00488 ─ 200 μg/mL, 0.625 ─ 320 μg/mL, 0.07813 ─ 320 μg/mL and 0.03906 ─ 320 μg/mL, respectively. The limits of detection and quantification, respectively, were 0.00488 and 0.03906 μg/mL for quercetin, 0.62500 and 2.50000 μg/mL for bisdemethoxycurcumin, 0.07813 and 0.31250 μg/mL for demethoxycurcumin, and 0.03906 and 0.07813 μg/mL for curcumin. The percent relative intra day standard deviation (% RSD values were 0.432 ─ 0.806 μg/mL, 0.576 ─ 0.723 μg/ mL, 0.635 ─ 0.752 μg/mL and 0.655 ─ 0.732 μg/mL for quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin, respectively, and those for intra day precision were 0.323 ─ 0.968 μg/mL, 0.805 ─ 0.854 μg/mL, 0.078 ─ 0.844 μg/mL and 0.275 ─ 0.829 μg/mL, respectively. The intra day accuracies were 99.589% ─ 100.821%, 98.588% ─ 101.084%, 9.289% ─ 100.88%, and 98.292% ─ 101.022% for quercetin, bisdemethoxycurcumin

  12. An alternant method to the traditional NASA hindlimb unloading model in mice.

    Science.gov (United States)

    Ferreira, J Andries; Crissey, Jacqueline M; Brown, Marybeth

    2011-03-10

    The Morey-Holton hindlimb unloading (HU) method is a widely accepted National Aeronautics and Space Administration (NASA) ground-based model for studying disuse-atrophy in rodents. Our study evaluated an alternant method to the gold-standard Morey-Holton HU tail-traction technique in mice. Fifty-four female mice (4-8 mo.) were HU for 14 days (n=34) or 28 days (n=20). Recovery from HU was assessed after 3 days of normal cage ambulation following HU (n=22). Aged matched mice (n=76) served as weight-bearing controls. Prior to HU a tail ring was formed with a 2-0 sterile surgical steel wire that was passed through the 5(th), 6(th), or 7(th) inter-vertebral disc space and shaped into a ring from which the mice were suspended. Vertebral location for the tail-ring was selected to appropriately balance animal body weight without interfering with defecation. We determined the success of this novel HU technique by assessing body weight before and after HU, degree of soleus atrophy, and adrenal mass following HU. Body weight of the mice prior to HU (24.3 ± 2.9g) did not significantly decline immediately after 14d of HU (22.7 ± 1.9g), 28d of HU (21.3 + 2.1g) or after 3 days recovery (24.0 ± 1.8g). Soleus muscle mass significantly declined (-39.1%, and -46.6%) following HU for 14 days and 28 days respectively (p<0.001). Following 3 days of recovery soleus mass significantly increased to 74% of control values. Adrenal weights of HU mice were not different compared to control mice. The success of our novel HU method is evidenced by the maintenance of animal body weight, comparable adrenal gland weights, and soleus atrophy following HU, corresponding to expected literature values. The primary advantages of this HU method include: 1) ease of tail examination during suspension; 2) decreased likelihood of cyanotic, inflamed, and/or necrotic tails frequently observed with tail-taping and HU; 3) no possibility of mice chewing the traction tape and coming out of the suspension

  13. Avocado oil extraction processes: method for cold-pressed high-quality edible oil production versus traditional production

    OpenAIRE

    Giacomo Costagli; Matteo Betti

    2015-01-01

    Nowadays the avocado fruit (Persea americana Mill.) is widely regarded as an important fruit for its nutritional values, as it is rich in vital human nutrients. The avocado fruit is mainly sold fresh on the market, which however trades also a relevant quantity of second-grade fruits with a relatively high oil content. Traditionally, this oil is extracted from dried fruits by means of organic solvents, but a mechanical method is also used in general in locations where drying systems and/or sol...

  14. HPLC method for simultaneous quantitative detection of quercetin and curcuminoids in traditional chinese medicines.

    Science.gov (United States)

    Ang, Lee Fung; Yam, Mun Fei; Fung, Yvonne Tan Tze; Kiang, Peh Kok; Darwin, Yusrida

    2014-12-01

    Quercetin and curcuminoids are important bioactive compounds found in many herbs. Previously reported high performance liquid chromatography ultraviolet (HPLC-UV) methods for the detection of quercetin and curcuminoids have several disadvantages, including unsatisfactory separation times and lack of validation according the standard guidelines of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use. A rapid, specific, reversed phase, HPLC-UV method with an isocratic elution of acetonitrile and 2% v/v acetic acid (40% : 60% v/v) (pH 2.6) at a flow rate of 1.3 mL/minutes, a column temperature of 35°C, and ultraviolet (UV) detection at 370 nm was developed. The method was validated and applied to the quantification of different types of market available Chinese medicine extracts, pills and tablets. The method allowed simultaneous determination of quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin in the concentration ranges of 0.00488 ─ 200 μg/mL, 0.625 ─ 320 μg/mL, 0.07813 ─ 320 μg/mL and 0.03906 ─ 320 μg/mL, respectively. The limits of detection and quantification, respectively, were 0.00488 and 0.03906 μg/mL for quercetin, 0.62500 and 2.50000 μg/mL for bisdemethoxycurcumin, 0.07813 and 0.31250 μg/mL for demethoxycurcumin, and 0.03906 and 0.07813 μg/mL for curcumin. The percent relative intra day standard deviation (% RSD) values were 0.432 ─ 0.806 μg/mL, 0.576 ─ 0.723 μg/mL, 0.635 ─ 0.752 μg/mL and 0.655 ─ 0.732 μg/mL for quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin, respectively, and those for intra day precision were 0.323 ─ 0.968 μg/mL, 0.805 ─ 0.854 μg/mL, 0.078 ─ 0.844 μg/mL and 0.275 ─ 0.829 μg/mL, respectively. The intra day accuracies were 99.589% ─ 100.821%, 98.588% ─ 101.084%, 9.289% ─ 100.88%, and 98.292% ─ 101.022% for quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin, respectively, and the

  15. Relationships between the generalized functional method and other methods of nonimaging optical design.

    Science.gov (United States)

    Bortz, John; Shatz, Narkis

    2011-04-01

    The recently developed generalized functional method provides a means of designing nonimaging concentrators and luminaires for use with extended sources and receivers. We explore the mathematical relationships between optical designs produced using the generalized functional method and edge-ray, aplanatic, and simultaneous multiple surface (SMS) designs. Edge-ray and dual-surface aplanatic designs are shown to be special cases of generalized functional designs. In addition, it is shown that dual-surface SMS designs are closely related to generalized functional designs and that certain computational advantages accrue when the two design methods are combined. A number of examples are provided. © 2011 Optical Society of America

  16. Material and immaterial designs: The patrimonialization of the Shipibo-Conibo kene designs and of the traditional use of ayahuasca in Peru

    Directory of Open Access Journals (Sweden)

    Luisa Elvira Belaunde

    2012-09-01

    Full Text Available Normal 0 21 false false false ES-CO X-NONE X-NONE The paper examines how the association between plants and graphic arts led to the simultaneous patrimonialization of the Shipibo-Conibo kene designs and of the traditional use of ayahuasca by the Peruvian government in 2008. It describes the context of production and commercialization by women of kene objets and its link to immaterial designs seen in ayahuasca sessions and used in new shamanic paintings. It examines the notions of visuality, materiality and identity laid out in the kene patrimonialization report and compares them to the stress put upon health and the sacred in the ayahuasca report. Although they had several limitations, both cases state the changing character of designs and plant use and avoid drawing inventories and reifying knowledge and visionary practices. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  17. The CREATE Method Does Not Result in Greater Gains in Critical Thinking than a More Traditional Method of Analyzing the Primary Literature †

    Science.gov (United States)

    Segura-Totten, Miriam; Dalman, Nancy E.

    2013-01-01

    Analysis of the primary literature in the undergraduate curriculum is associated with gains in student learning. In particular, the CREATE (Consider, Read, Elucidate hypotheses, Analyze and interpret the data, and Think of the next Experiment) method is associated with an increase in student critical thinking skills. We adapted the CREATE method within a required cell biology class and compared the learning gains of students using CREATE to those of students involved in less structured literature discussions. We found that while both sets of students had gains in critical thinking, students who used the CREATE method did not show significant improvement over students engaged in a more traditional method for dissecting the literature. Students also reported similar learning gains for both literature discussion methods. Our study suggests that, at least in our educational context, the CREATE method does not lead to higher learning gains than a less structured way of reading primary literature. PMID:24358379

  18. Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

    Science.gov (United States)

    2005-04-01

    PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

  19. What role do traditional beliefs play in treatment seeking and delay for Buruli ulcer disease?--insights from a mixed methods study in Cameroon.

    Directory of Open Access Journals (Sweden)

    Koen Peeters Grietens

    Full Text Available Victims of Buruli ulcer disease (BUD frequently report to specialized units at a late stage of the disease. This delay has been associated with local beliefs and a preference for traditional healing linked to a reportedly mystical origin of the disease. We assessed the role beliefs play in determining BUD sufferers' choice between traditional and biomedical treatments.Anthropological fieldwork was conducted in community and clinical settings in the region of Ayos and Akonolinga in Central Cameroon. The research design consisted of a mixed methods study, triangulating a qualitative strand based on ethnographic research and quantitative data obtained through a survey presented to all patients at the Ayos and Akonolinga hospitals (N = 79 at the time of study and in four endemic communities (N = 73 belonging to the hospitals' catchment area.The analysis of BUD sufferers' health-seeking behaviour showed extremely complex therapeutic itineraries, including various attempts and failures both in the biomedical and traditional fields. Contrary to expectations, nearly half of all hospital patients attributed their illness to mystical causes, while traditional healers admitted patients they perceived to be infected by natural causes. Moreover, both patients in hospitals and in communities often combined elements of both types of treatments. Ultimately, perceptions regarding the effectiveness of the treatment, the option for local treatment as a cost prevention strategy and the characteristics of the doctor-patient relationship were more determinant for treatment choice than beliefs.The ascription of delay and treatment choice to beliefs constitutes an over-simplification of BUD health-seeking behaviour and places the responsibility directly on the shoulders of BUD sufferers while potentially neglecting other structural elements. While more efficacious treatment in the biomedical sector is likely to reduce perceived mystical involvement in the

  20. Effects of combined traditional processing methods on the nutritional quality of beans.

    Science.gov (United States)

    Nakitto, Aisha M; Muyonga, John H; Nakimbugwe, Dorothy

    2015-05-01

    Consumption of dry beans is limited by long cooking times thus high fuel requirement. The bioavailability of nutrients in beans is also limited due to presence of antinutrients such as phytates and tannins. Little research has been done on combined processing methods for production of nutritious fast cooking bean flour and the effect of combined treatments on nutritional quality of beans has not previously determined. The aim of this study was to reduce cooking time and enhance the nutritional value of dry beans. Specifically to: develop protocols for production of fast cooking bean flours and assess the effect of processing on the nutritional characteristics of the flours. Dry beans (K131 variety) were soaked for 12 h; sprouted for 48 h; dehulled and steamed for 25 and 15 min for whole and dehulled beans respectively or roasted at 170°C for 45 and 15 min for whole and dehulled beans respectively. Dehulling eliminated phytates and tannins and increased protein digestibility. In vitro protein digestibility and mineral (iron and zinc) extractability were negatively correlated with tannin and phytate content. Total available carbohydrates were highest in moist heat-treated bean flours. Overall, combined processing of beans improved the nutritional quality of dry beans and the resulting precooked flours need less cooking time compared to whole dry beans.

  1. Informed consent recall and comprehension in orthodontics: traditional vs improved readability and processability methods.

    Science.gov (United States)

    Kang, Edith Y; Fields, Henry W; Kiyak, Asuman; Beck, F Michael; Firestone, Allen R

    2009-10-01

    Low general and health literacy in the United States means informed consent documents are not well understood by most adults. Methods to improve recall and comprehension of informed consent have not been tested in orthodontics. The purposes of this study were to evaluate (1) recall and comprehension among patients and parents by using the American Association of Orthodontists' (AAO) informed consent form and new forms incorporating improved readability and processability; (2) the association between reading ability, anxiety, and sociodemographic variables and recall and comprehension; and (3) how various domains (treatment, risk, and responsibility) of information are affected by the forms. Three treatment groups (30 patient-parent pairs in each) received an orthodontic case presentation and either the AAO form, an improved readability form (MIC), or an improved readability and processability (pairing audio and visual cues) form (MIC + SS). Structured interviews were transcribed and coded to evaluate recall and comprehension. Significant relationships among patient-related variables and recall and comprehension explained little of the variance. The MIC + SS form significantly improved patient recall and parent recall and comprehension. Recall was better than comprehension, and parents performed better than patients. The MIC + SS form significantly improved patient treatment comprehension and risk recall and parent treatment recall and comprehension. Patients and parents both overestimated their understanding of the materials. Improving the readability of consent materials made little difference, but combining improved readability and processability benefited both patients' recall and parents' recall and comprehension compared with the AAO form.

  2. An investigation into the Traditional Method of Production of Omani Sarooj

    Directory of Open Access Journals (Sweden)

    A. W. Hago

    1999-12-01

    Full Text Available In the past, sarooj had been used as the basic cementing material with which the A flaj system (the irrigation system used in Oman was built. Worldwide, materials like sarooj existed and were known for their good impermeability and long durability. For this reason it was extensively used in hydraulic structures. Even in this century and with the ready availability of Portland cements, special plants were erected to produce materials like sarooj for major dams in the world. In the process of hydration In sarooj-lime mixes or in sarooj-cement mixes free lime is released which causes distress through the expansion of the mortar if allowed to accumulate. If free lime is stabilized within the structure of the mortar. it imparts additional strength and durability to it. The mortar becomes less permeable to water, which increases its resistance to wearhering. The stabilization is possible through the presence of a reactive silica/alumina in the mix so that it reacts with the free lime to form calcium silicates/aluminates. The properties of sarooj depend largely on the type of the raw material and the calcination parameters. This paper describes this material, its method of production and uses, and highlights research currently conducted to improve its properties.

  3. New or improved computational methods and advanced reactor design

    International Nuclear Information System (INIS)

    Nakagawa, Masayuki; Takeda, Toshikazu; Ushio, Tadashi

    1997-01-01

    Nuclear computational method has been studied continuously up to date, as a fundamental technology supporting the nuclear development. At present, research on computational method according to new theory and the calculating method thought to be difficult to practise are also continued actively to find new development due to splendid improvement of features of computer. In Japan, many light water type reactors are now in operations, new computational methods are induced for nuclear design, and a lot of efforts are concentrated for intending to more improvement of economics and safety. In this paper, some new research results on the nuclear computational methods and their application to nuclear design of the reactor were described for introducing recent trend of the nuclear design of the reactor. 1) Advancement of the computational method, 2) Reactor core design and management of the light water reactor, and 3) Nuclear design of the fast reactor. (G.K.)

  4. Negotiation and Design for the Self-Organizing City. Gaming as a method for Urban Design

    Directory of Open Access Journals (Sweden)

    Ekim Tan

    2014-08-01

    of collective intelligence, derived from the real lives of players to be redeployed in their real urban futures. Vitally, city gaming enables the negotiation of this future, as players with conflicting interests are given an opportunity to develop compatible, even shared, visions. By transforming serious issues into a playful and engaging (although no less serious experience, city gaming unlocks difficult conversations and helps to build communities in the long term. The urban design, policy and action plans generated collaboratively through gaming will increase social coherence and local agency, as well as cutting costs and time in urban development processes. This thesis proposes Generative City Gaming as an innovative urban planning and design method built on the tradition of serious gaming. Going beyond the educational scope of other serious games, the ultimate aim of city gaming is to become operational in urban processes – a goal in the process of making a reality since 2008, when Generative City Gaming was first applied to a real urban questions in the Netherlands, later expanding to Istanbul, Tirana, Brussels, and Cape Town. “Negotiation and Design for the Self-Organizing City” reports on six of the twelve city games played to date which were instrumental in the evolution of the method: Play Almere Haven tested whether a game based on self-organizing mechanisms could provide an urban order; Play Rotterdam questioned whether game-derived design could be implemented in urban renewal of a central Rotterdam neighborhood; Yap-Yaşa was played with real urban stakeholders for transforming Istanbul’s self-built neighbourhoods; Play Noord investigated a masterplan on hold could be fixed by unconventional stakeholders; Play Oosterwold jumped up a scale to test the rules of a flexible urban expansion plan for 4500 hectares; Play Van Gendthallen, was the first to enable stakeholders to make the leap from design to reality within the game process. The Generative

  5. The comparison of composite aircraft field repair method (cafrm) with traditional aircraft repair technologies

    Science.gov (United States)

    Whelan, Mary Elizabeth

    The sulfur biogeochemical cycle includes biotic and abiotic processes important to global climate, atmospheric chemistry, food security, and the study of related cycles. The largest flux of sulfur on Earth is weathering from the continents into the sulfate-rich oceans; one way in which sulfur can be returned to land is through transport of reduced sulfur gases via the atmosphere. Here I developed a method for quantifying low-level environmental fluxes of several sulfur-containing gases, H2S, COS, CH3SCH 3 (DMS), and HSCH3, between terrestrial ecosystems and the atmosphere. COS is the most prevalent reduced sulfur gas in the atmosphere, considered to be inert in the troposphere except for its uptake in plant leaves and to a smaller extent aerobic soils. This dissertation reports two surprising cases that go against conventional thinking about the sulfur cycle. We found that the common salt marsh plant Batis maritima can mediate net COS production to the atmosphere. We also found that an aerobic wheat field soil produces COS abiotically when incubated in the dark at > 25 °C and at lower temperatures under light conditions. We then sought to separately quantify plant and soil sulfur gas fluxes by undertaking a year-long field campaign in a grassland with a Mediterranean climate, where green plants were present only half of the year. We measured in situ soil fluxes of COS and DMS during the non- growing dry season, using water additions to simulate soil fluxes of the growing, wet season. COS and CO2 are consumed in a predictable ratio by enzymes involved in photosynthetic pathways; however, while CO2 is released by back diffusion and autorespiration, COS is usually not generated by plants. Using measurements during the growing season, we were then able to calculate gross primary production by using the special relationship between CO2 and COS. This dissertation has developed a greater understanding of the vagaries of the atmospheric-terrestrial sulfur cycle and

  6. The Crux of Minimalist Architecture: A Local Strategy of Housing Design in Jakarta or a Break Free from Traditions?

    Science.gov (United States)

    Nurliani Lukito, Yulia; Previta Handoko, Bella

    2018-03-01

    During the 1950s, the idea of Minimalism presents itself as one of the response of the search of universal language in art and architecture. This particular style, which was started as an art movement, has received many critics in the relation to the loss of art but nevertheless Minimalism has spread all over the world and influenced many disciplines, including architecture. In minimalist architecture, elements of design convey simplicity, basic geometrical forms, with no decoration, and the use of white color, modern materials and clean spaces. The “less is more” movement in architecture, which can be seen in the works of Mies van der Rohe and also in the International Style that celebrates materiality and rationality, is also understood as Minimalism. Moreover, an important historical connection to minimalist architecture is the relationship to popular representations of how the upscale modern family lived. Recently, the idea of minimalist architecture appears in Indonesia as a preferable housing style. Adapting minimalist architecture to be suitable for a tropical climate can be done partly by modifying the forms and the microclimate such as using passive system approach or additional equipment that creates comfort in the building. This paper investigates the idea of minimalist architecture in Jakarta, Indonesia, and how the idea is widely used for housing. Some questions related to this study are investigating whether minimalist architecture in Jakarta shares the same principles with minimalist architecture in its earlier time or it is only a trend in housing design. Not only this study analyzes the moment when the idea of Minimalism develops in the history of modern architecture but also some important characteristics of minimalist architecture in different era and space. In addition, this study also discusses how minimalist architecture that happens in Jakarta becomes a way of dealing with both modern and local conditions, including a break free from

  7. Enhancing user experience design with an integrated storytelling method

    NARCIS (Netherlands)

    Peng, Qiong; Matterns, Jean Bernard; Marcus, A.

    2016-01-01

    Storytelling has been known as a service design method and been used broadly not only in service design but also in the context of user experience design. However, practitioners cannot yet fully appreciate the benefits of storytelling, and often confuse storytelling with storyboarding and scenarios.

  8. Methods for design flood estimation in South Africa | Smithers ...

    African Journals Online (AJOL)

    The estimation of design floods is necessary for the design of hydraulic structures and to quantify the risk of failure of the structures. Most of the methods used for design flood estimation in South Africa were developed in the late 1960s and early 1970s and are in need of updating with more than 40 years of additional data ...

  9. A Frequency Domain Design Method For Sampled-Data Compensators

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Jannerup, Ole Erik

    1990-01-01

    A new approach to the design of a sampled-data compensator in the frequency domain is investigated. The starting point is a continuous-time compensator for the continuous-time system which satisfy specific design criteria. The new design method will graphically show how the discrete...

  10. Hybrid inverse design method for nonlifting bodies in incompressible flow

    CSIR Research Space (South Africa)

    Broughton, BA

    2006-11-01

    Full Text Available A methodology for the inverse design of non-lifting axisymmetric bodies in compressible flow is presented. In this method, an inverse design approach based on conformal mapping is used to design a set of airfoils in isolation. These airfoils...

  11. Integration of educational methods and physical settings: Design ...

    African Journals Online (AJOL)

    ... setting without having an architectural background. The theoretical framework of the research allows designers to consider key features and users' possible activities in High/ Scope settings and shape their designs accordingly. Keywords: daily activity; design; High/Scope education; interior space; teaching method ...

  12. Postmodern Software Design with NYAM: Not Yet Another Method

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Broy, M.; Rumpe, B.

    1998-01-01

    This paper presents a conceptual toolbox for software specification and design that contains techniques from structured and object-oriented specification and design methods. The toolbox is called TRADE (Toolkit for Requirements and Design Engineering). The TRADE tools are used in teaching

  13. WSDM : A user-centred design method for web sites

    NARCIS (Netherlands)

    de Troyer, O.M.F.; Leune, C.J.

    1998-01-01

    WSDM is a user-centered method for the design of kiosk Web Sites. By explicitly starting from the requirements of the users or visitors, WSDM solves Web site problems that are primarily caused by that fact that a site has no underlying design at all, or that the design is mostly data-driven.

  14. Development of inelastic design method for liquid metal reactor plants

    International Nuclear Information System (INIS)

    Takahashi, Yukio; Take, Kohji; Kaguchi, Hitoshi; Fukuda, Yoshio; Uno, Tetsuro.

    1991-01-01

    Effective utilization of inelastic analysis in structural design assessment is expected to play an important role for avoiding too conservative design of liquid metal reactor plants. Studies have been conducted by the authors to develop a guideline for application of detailed inelastic analysis in design assessment. Both fundamental material characteristics tests and structural failure tests were conducted. Fundamental investigations were made on inelastic analysis method and creep-fatigue life prediction method based on the results of material characteristics tests. It was demonstrated through structural failure tests that the design method constructed based on these fundamental investigations can predict failure lives in structures subjected to cyclic thermal loadings with sufficient accuracy. (author)

  15. A building characterization-based method for the advancement of knowledge on external architectural features of traditional rural buildings

    Directory of Open Access Journals (Sweden)

    Porto, S. M. C.

    2013-12-01

    Full Text Available The significant role that traditional rural buildings have with regard to environmental conservation and rural development is widely acknowledged by the scientific community. These buildings must be protected from inappropriate building interventions that may stem from their rather superficial knowledge. Therefore, this study was directed towards overcoming such a limitation by developing a method based on traditional rural buildings’ characterization. In particular, the study aimed at the characterization of building materials and techniques used for the construction of a number of building components that make up the external envelope of traditional rural buildings. The application of the method to a homogeneous area of the Etna Regional Park (Italy highlighted the need to improve the technical norms of the park’s Territorial Coordination Plan to respect the building characteristics of the traditional rural buildings located in the protected area.La comunidad científica le atribuye a las construcciones rurales tradicionales un papel fundamental en términos de conservación del medioambiente y de evolución rural. Dichos edificios deben ser protegidos contra obras inapropiadas debidas a un conocimiento más bien superficial. Por lo tanto, el objetivo de este estudio fue el de eliminar dichas limitaciones desarrollando un método basado en la caracterización de las construcciones rurales tradicionales, que puede ser aplicado para mejorar el conocimiento de estas últimas. En particular, el susodicho estudio tiene la finalidad de caracterizar los materiales y las técnicas constructivas a emplear para la construcción de algunos componentes del envoltorio externo de las construcciones rurales tradicionales. La aplicación del método propuesto a una zona homogénea del Parque Regional del Etna (Italia puso de relieve la necesidad de mejorar las normas técnicas del Plan de Coordinación Territorial del parque para respetar las caracter

  16. Interactive methods to involve users into workspace design process

    DEFF Research Database (Denmark)

    Souza da Conceição, Carolina; Broberg, Ole; Banke, Palle

    2013-01-01

    This paper addresses the question of whether the use of a combination of interactive methods involving workers can lead to a useful input to the (re)design of their workspace. The workbook and the layout design game methods were tested, and a comparison between their use and the ergonomic analysi...

  17. Valve cam design using numerical step-by-step method

    OpenAIRE

    Vasilyev, Aleksandr; Bakhracheva, Yuliya; Kabore, Ousman; Zelenskiy, Yuriy

    2014-01-01

    This article studies the numerical step-by-step method of cam profile design. The results of the study are used for designing the internal combustion engine valve gear. This method allows to profile the peak efficiency of cams in view of many restrictions, connected with valve gear serviceability and reliability.

  18. Human-centred Methods of Social and Technical Design

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard

    Different inderstandings of design are presented.The historical background of human-centred designis described.Methods of social shaping are described in detailand the author's research experiences with using these methods in differentinternational projects presented and a model tointegrate...... technical and social perspective of design is suggested....

  19. Methods of designing and manufacturing a heat exchanger for the ...

    African Journals Online (AJOL)

    The article describes the method of calculation, design and manufacture of the the plate heat exchanger for the gas turbine plants with heat recovery. We represented the method of threedimensional calculation, which allowed conducting a virtual experiment and clarifying the design of the heat exchanger for the given ...

  20. Fingerprinting and validation of a LC-DAD method for the analysis of biflavanones in Garcinia kola-based antimalarial improved traditional medicines.

    Science.gov (United States)

    Tshibangu, P Tshisekedi; Kapepula, P Mutwale; Kapinga, M J Kabongo; Lupona, H Kabika; Ngombe, N Kabamba; Kalenda, Dibungi T; Jansen, O; Wauters, J N; Tits, M; Angenot, L; Rozet, E; Hubert, Ph; Marini, R D; Frédérich, M

    2016-09-05

    African populations use traditional medicines in their initial attempt to treat a range of diseases. Nevertheless, accurate knowledge of the composition of these drugs remains a challenge in terms of ensuring the health of population and in order to advance towards improved traditional medicines (ITMs). In this paper chromatographic methods were developed for qualitative and quantitative analyses of a per os antimalarial ITM containing Garcinia kola. The identified analytical markers were used to establish TLC and HPLC fingerprints. G. kola seeds were analysed by HPLC to confirm the identity of the extract used by the Congolese manufacturer in the ITM. The main compounds (GB1, GB2, GB-1a and Kolaflavanone) were isolated by preparative TLC and identified by UPLC-MS and NMR. For the quantification of the major compound GB1, a simple and rapid experimental design was applied to develop an LC method, and then its validation was demonstrated using the total error strategy with the accuracy profile as a decision tool. The accurate results were observed within 0.14-0.45mg/mL range of GB1 expressed as naringenin. The extracts used in several batches of the analysed oral solutions contained GB1 (expressed as naringenin) within 2.04-2.43%. Both the fingerprints and the validated LC-DAD were found suitable for the quality control of G. kola-based raw material and finished products, respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Innovative design method of automobile profile based on Fourier descriptor

    Science.gov (United States)

    Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

    2017-10-01

    Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

  2. Design of cooling towers by the effectiveness-NTU method

    International Nuclear Information System (INIS)

    Jaber, H.; Webb, R.L.

    1989-01-01

    This paper develops the effectiveness-NTU, number of transfer units, design method for cooling towers. The definitions for effectiveness and NTU are totally consistent with the fundamental definitions used in heat exchanger design. Sample calculations are presented for counter and crossflow cooling towers. Using the proper definitions, a person competent in heat transfer design can easily use the same basic method to design a cooling tower of counter, cross, or parallel flow configuration. The problems associated with the curvature of the saturated air enthalpy line are also treated. A one-increment design ignores the effect of this curvature. Increased precision can be obtained by dividing the cooling range into two or more increments. The standard effectiveness-NYU method is then used for each of the increments. Calculations are presented to define the error associated with different numbers of increments. This defines the number of increments required to attain a desired degree of precision. The authors also summarize the LMED method introduced by Berman, and show that this is totally consistent with the effectiveness-NTU method. Hence, using proper and consistent terms, heat exchanger designers are shown how to use either the standard Log-Mean Enthalpy Method (LMED) or effectiveness-NTU design methods to design cooling towers

  3. Application of analytical target cascading method in multidisciplinary design optimization of ship conceptual design

    Directory of Open Access Journals (Sweden)

    WANG Jian

    2017-10-01

    Full Text Available [Objectives] Ship conceptual design requires the coordination of many different disciplines for comprehensive optimization, which presents a complicated system design problem affecting several fields of technology. However, the development of overall ship design is relatively slow compared with other subjects. [Methods] The decomposition and coordination strategy of ship design is presented, and the analytical target cascading (ATC method is applied to the multidisciplinary design optimization of the conceptual design phase of ships on this basis. A tank ship example covering the 5 disciplines of buoyancy and stability, rapidity, maneuverability, capacity and economy is established to illustrate the analysis process in the present study. [Results] The results demonstrate the stability, convergence and validity of the ATC method in dealing with the complex coupling effect occurring in ship conceptual design.[Conclusions] The proposed method provides an effective basis for optimization of ship conceptual design.

  4. 77 FR 60985 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

    Science.gov (United States)

    2012-10-05

    ... Methods: Designation of Three New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of three new equivalent methods for monitoring ambient air quality. SUMMARY... equivalent methods, one for measuring concentrations of PM 2.5 , one for measuring concentrations of PM 10...

  5. Preliminary study on the inactivation of anisakid larvae in baccalà prepared according to traditional methods

    Directory of Open Access Journals (Sweden)

    Giorgio Smaldone

    2017-11-01

    Full Text Available The European Food Safety Authority stated that many traditional marinating and cold smoking methods are not sufficient to kill A. simplex and asked to evaluate alternative treatments for killing viable parasites in fishery. Baccalà is a well-liked traditional product. The aim of study was to evaluate the effectiveness of the salting process on the inactivation of nematodes of the genus Anisakis in naturally infected Baccalà fillets. N. 19 fillets, subjected to a dual salting process (brine and dry salting were analyzed. Visual inspection and chloropeptic digestion were performed. Larvae viability was evaluated, and parameters such as NaCl (%, moisture (%, WPS and aw were determined. In n. 17 samples parasites were found 123 parasites with a mean intensity of 7.23±4.78 and an mean abundance of 6.47±5.05. Visual examination has revealed 109 parasites. 61.8% of larvae were found in the ventral portions. The results show that salting process with a salt concentration of 18.6%, aw values of 0.7514 and 24.15% WPS in all parts of baccalà fillets, devitalise Anisakidae larvae in a 15-day period.

  6. Preliminary study on the inactivation of anisakid larvae in baccalà prepared according to traditional methods.

    Science.gov (United States)

    Smaldone, Giorgio; Marrone, Raffaele; Palma, Giuseppe; Sarnelli, Paolo; Anastasio, Aniello

    2017-10-20

    The European Food Safety Authority stated that many traditional marinating and cold smoking methods are not sufficient to kill A. simplex and asked to evaluate alternative treatments for killing viable parasites in fishery . Baccalà is a well-liked traditional product. The aim of study was to evaluate the effectiveness of the salting process on the inactivation of nematodes of the genus Anisakis in naturally infected Baccalà fillets. N. 19 fillets, subjected to a dual salting process (brine and dry salting) were analyzed. Visual inspection and chloropeptic digestion were performed. Larvae viability was evaluated, and parameters such as NaCl (%), moisture (%), WPS and a w were determined. In n. 17 samples parasites were found 123 parasites with a mean intensity of 7.23±4.78 and an mean abundance of 6.47±5.05. Visual examination has revealed 109 parasites. 61.8% of larvae were found in the ventral portions. The results show that salting process with a salt concentration of 18.6%, a w values of 0.7514 and 24.15% WPS in all parts of baccalà fillets, devitalise Anisakidae larvae in a 15-day period.

  7. Protected Designation of Origin (PDO), Protected Geographical Indication (PGI) and Traditional Speciality Guaranteed (TSG): A bibiliometric analysis.

    Science.gov (United States)

    Dias, Claudia; Mendes, Luís

    2018-01-01

    Despite the importance of the literature on food quality labels in the European Union (PDO, PGI and TSG), our search did not find any review joining the various research topics on this subject. This study aims therefore to consolidate the state of academic research in this field, and so the methodological option was to elaborate a bibliometric analysis resorting to the term co-occurrence technique. Analysis was made of 501 articles on the ISI Web of Science database, covering publications up to 2016. The results of the bibliometric analysis allowed identification of four clusters: "Protected Geographical Indication", "Certification of Olive Oil and Cultivars", "Certification of Cheese and Milk" and "Certification and Chemical Composition". Unlike the other clusters, where the PDO label predominates, the "Protected Geographical Indication" cluster covers the study of PGI products, highlighting analysis of consumer behaviour in relation to this type of product. The focus of studies in the "Certification of Olive Oil and Cultivars" cluster and the "Certification of Cheese and Milk" cluster is the development of authentication methods for certified traditional products. In the "Certification and Chemical Composition" cluster, standing out is analysis of the profiles of fatty acids present in this type of product. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Expanding color design methods for architecture and allied disciplines

    Science.gov (United States)

    Linton, Harold E.

    2002-06-01

    The color design processes of visual artists, architects, designers, and theoreticians included in this presentation reflect the practical role of color in architecture. What the color design professional brings to the architectural design team is an expertise and rich sensibility made up of a broad awareness and a finely tuned visual perception. This includes a knowledge of design and its history, expertise with industrial color materials and their methods of application, an awareness of design context and cultural identity, a background in physiology and psychology as it relates to human welfare, and an ability to problem-solve and respond creatively to design concepts with innovative ideas. The broadening of the definition of the colorists's role in architectural design provides architects, artists and designers with significant opportunities for continued professional and educational development.

  9. Determination of genetic structure of germplasm collections: are traditional hierarchical clustering methods appropriate for molecular marker data?

    NARCIS (Netherlands)

    Odong, T.L.; Heerwaarden, van J.; Jansen, J.; Hintum, van T.J.L.; Eeuwijk, van F.A.

    2011-01-01

    Despite the availability of newer approaches, traditional hierarchical clustering remains very popular in genetic diversity studies in plants. However, little is known about its suitability for molecular marker data. We studied the performance of traditional hierarchical clustering techniques using

  10. Review of design optimization methods for turbomachinery aerodynamics

    Science.gov (United States)

    Li, Zhihui; Zheng, Xinqian

    2017-08-01

    In today's competitive environment, new turbomachinery designs need to be not only more efficient, quieter, and ;greener; but also need to be developed at on much shorter time scales and at lower costs. A number of advanced optimization strategies have been developed to achieve these requirements. This paper reviews recent progress in turbomachinery design optimization to solve real-world aerodynamic problems, especially for compressors and turbines. This review covers the following topics that are important for optimizing turbomachinery designs. (1) optimization methods, (2) stochastic optimization combined with blade parameterization methods and the design of experiment methods, (3) gradient-based optimization methods for compressors and turbines and (4) data mining techniques for Pareto Fronts. We also present our own insights regarding the current research trends and the future optimization of turbomachinery designs.

  11. Manufacturing error sensitivity analysis and optimal design method of cable-network antenna structures

    Science.gov (United States)

    Zong, Yali; Hu, Naigang; Duan, Baoyan; Yang, Guigeng; Cao, Hongjun; Xu, Wanye

    2016-03-01

    Inevitable manufacturing errors and inconsistency between assumed and actual boundary conditions can affect the shape precision and cable tensions of a cable-network antenna, and even result in failure of the structure in service. In this paper, an analytical sensitivity analysis method of the shape precision and cable tensions with respect to the parameters carrying uncertainty was studied. Based on the sensitivity analysis, an optimal design procedure was proposed to alleviate the effects of the parameters that carry uncertainty. The validity of the calculated sensitivities is examined by those computed by a finite difference method. Comparison with a traditional design method shows that the presented design procedure can remarkably reduce the influence of the uncertainties on the antenna performance. Moreover, the results suggest that especially slender front net cables, thick tension ties, relatively slender boundary cables and high tension level can improve the ability of cable-network antenna structures to resist the effects of the uncertainties on the antenna performance.

  12. Comparative evaluation of reproductive parameters between the automatic GEDIS cervical insemination method and the traditional in multicolor bristles

    Directory of Open Access Journals (Sweden)

    Núñez-Torres Oscar Patricio

    2017-04-01

    Full Text Available The research was carried out in Ecuador, in the province of Tungurahua, Cevallos county. A comparison of reproductive parameters between the cervical self insemination method and the traditional one in multiparous sows was performed using 12 sows (hybrid females between the second and fourth calving, dividing In two groups of 6 sows respectively, using the insemination protocol 12h - 24h - 36h. Fresh semen was prepared with long-term diluent + bidistilled water, at a concentration of 3 x 109 spermatozoa/mL in total volume per 100 mL straw. At the time of insemination the amount of seminal reflux was determined and when the Student's T test was applied with paired observations in the results, they statistically reported a significant difference at 5% among the evaluated methods, the calculated T value was 9.50 Which is greater than the T of tables at 5% of 2.57. The duration of each method was determined, results that reported similarity between the two methods (15 min. At 21 days post insemination pregnancy was diagnosed by ultrasound and evaluation of no return of heat, results that reported in both methods 100% effectiveness. Subsequently, at the time of delivery, the number of total born piglets was evaluated, using the Student's T-test with paired observations that statistically there was no significant difference at 5% between the two methods, the calculated T value was 0, 14 which is less than the T of tables at 5% of 2.57. We also determined the weight of piglets at birth, reported by Student's t-test with paired observations that there is a statistically significant difference to 5% among the evaluated methods, the calculated T value was 5.17, which is higher than the T Of tables at 5% of 2.57. As for costs there is no considerable difference.

  13. Theory and design methods of special space orbits

    CERN Document Server

    Zhang, Yasheng; Zhou, Haijun

    2017-01-01

    This book focuses on the theory and design of special space orbits. Offering a systematic and detailed introduction to the hovering orbit, spiral cruising orbit, multi-target rendezvous orbit, initiative approaching orbit, responsive orbit and earth pole-sitter orbit, it also discusses the concept, theory, design methods and application of special space orbits, particularly the design and control method based on kinematics and astrodynamics. In addition the book presents the latest research and its application in space missions. It is intended for researchers, engineers and postgraduates, especially those working in the fields of orbit design and control, as well as space-mission planning and research.

  14. Multi-objective optimization design method of radiation shielding

    International Nuclear Information System (INIS)

    Yang Shouhai; Wang Weijin; Lu Daogang; Chen Yixue

    2012-01-01

    Due to the shielding design goals of diversification and uncertain process of many factors, it is necessary to develop an optimization design method of intelligent shielding by which the shielding scheme selection will be achieved automatically and the uncertainties of human impact will be reduced. For economical feasibility to achieve a radiation shielding design for automation, the multi-objective genetic algorithm optimization of screening code which combines the genetic algorithm and discrete-ordinate method was developed to minimize the costs, size, weight, and so on. This work has some practical significance for gaining the optimization design of shielding. (authors)

  15. Simple design of slanted grating with simplified modal method.

    Science.gov (United States)

    Li, Shubin; Zhou, Changhe; Cao, Hongchao; Wu, Jun

    2014-02-15

    A simplified modal method (SMM) is presented that offers a clear physical image for subwavelength slanted grating. The diffraction characteristic of the slanted grating under Littrow configuration is revealed by the SMM as an equivalent rectangular grating, which is in good agreement with rigorous coupled-wave analysis. Based on the equivalence, we obtained an effective analytic solution for simplifying the design and optimization of a slanted grating. It offers a new approach for design of the slanted grating, e.g., a 1×2 beam splitter can be easily designed. This method should be helpful for designing various new slanted grating devices.

  16. Creative design inspired by biological knowledge: Technologies and methods

    Science.gov (United States)

    Tan, Runhua; Liu, Wei; Cao, Guozhong; Shi, Yuan

    2018-05-01

    Biological knowledge is becoming an important source of inspiration for developing creative solutions to engineering design problems and even has a huge potential in formulating ideas that can help firms compete successfully in a dynamic market. To identify the technologies and methods that can facilitate the development of biologically inspired creative designs, this research briefly reviews the existing biological-knowledge-based theories and methods and examines the application of biological-knowledge-inspired designs in various fields. Afterward, this research thoroughly examines the four dimensions of key technologies that underlie the biologically inspired design (BID) process. This research then discusses the future development trends of the BID process before presenting the conclusions.

  17. Design Method for Channel Diffusers of Centrifugal Compressors

    Directory of Open Access Journals (Sweden)

    Mykola Kalinkevych

    2013-01-01

    Full Text Available The design method for channel diffusers of centrifugal compressors, which is based on the solving of the inverse problem of gas dynamics, is presented in the paper. The concept of the design is to provide high pressure recovery of the diffuser by assuming the preseparation condition of the boundary layer along one of the channel surfaces. The channel diffuser was designed with the use of developed method to replace the vaned diffuser of the centrifugal compressor model stage. The numerical simulation of the diffusers was implemented by means of CFD software. Obtained gas dynamic characteristics of the designed diffuser were compared to the base vaned diffuser of the compressor stage.

  18. Formal methods in design and verification of functional specifications

    International Nuclear Information System (INIS)

    Vaelisuo, H.

    1995-01-01

    It is claimed that formal methods should be applied already when specifying the functioning of the control/monitoring system, i.e. when planning how to implement the desired operation of the plant. Formal methods are seen as a way to mechanize and thus automate part of the planning. All mathematical methods which can be applied on related problem solving should be considered as formal methods. Because formal methods can only support the designer, not replace him/her, they must be integrated into a design support tool. Such a tool must also aid the designer in getting the correct conception of the plant and its behaviour. The use of a hypothetic design support tool is illustrated to clarify the requirements such a tool should fulfill. (author). 3 refs, 5 figs

  19. Designing adaptive intensive interventions using methods from engineering.

    Science.gov (United States)

    Lagoa, Constantino M; Bekiroglu, Korkut; Lanza, Stephanie T; Murphy, Susan A

    2014-10-01

    Adaptive intensive interventions are introduced, and new methods from the field of control engineering for use in their design are illustrated. A detailed step-by-step explanation of how control engineering methods can be used with intensive longitudinal data to design an adaptive intensive intervention is provided. The methods are evaluated via simulation. Simulation results illustrate how the designed adaptive intensive intervention can result in improved outcomes with less treatment by providing treatment only when it is needed. Furthermore, the methods are robust to model misspecification as well as the influence of unobserved causes. These new methods can be used to design adaptive interventions that are effective yet reduce participant burden. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  20. Behavior Space Design and Expression by the Theories and Methods of Urban Design—The Yan Dao ancient town of design practice

    Directory of Open Access Journals (Sweden)

    Chen Wei

    2015-01-01

    Full Text Available In recent years, the ancient town of update and development has become a new hot spot, the study of old town renewal of concern is gradually warming. And again there are a lot of space in the middle of the old town renewal design and traditional style, space activities and use the contradiction between population, which becomes a problem urgently to be solved in design stage. The purpose of this study was to explore old town design space and behavior, traditional and modern conflict resolution methods, and to present the town development and design with a design concept. This paper’ uses three theories of urban design (The relationship between figure and ground, Contact theory and Place theory as a real-time monitoring, assessment, comparison of methods, to study Yan Dao Ancient Town, and the space for analysis. In the research, this paper based on the design theory of the three major city as a starting point, detailedly describes the different types in a certain area of difference in the behavior and the properties of space, and the ancient town of Hubei Shennongjia forest region salt path planning and design practice, the ancient town of updating the connotation of the historical context and space behavior of connection. The conclusion of this thesis put forward the method of that based on the space shape of ancient design method of its application in practice.

  1. The Combination of DGT Technique and Traditional Chemical Methods for Evaluation of Cadmium Bioavailability in Contaminated Soils with Organic Amendment

    Science.gov (United States)

    Yao, Yu; Sun, Qin; Wang, Chao; Wang, Pei-Fang; Miao, Ling-Zhan; Ding, Shi-Ming

    2016-01-01

    Organic amendments have been proposed as a means of remediation for Cd-contaminated soils. However, understanding the inhibitory effects of organic materials on metal immobilization requires further research. In this study colza cake, a typical organic amendment material, was investigated in order to elucidate the ability of this material to reduce toxicity of Cd-contaminated soil. Available concentrations of Cd in soils were measured using an in situ diffusive gradients in thin films (DGT) technique in combination with traditional chemical methods, such as HOAc (aqua regia), EDTA (ethylene diamine tetraacetic acid), NaOAc (sodium acetate), CaCl2, and labile Cd in pore water. These results were applied to predict the Cd bioavailability after the addition of colza cake to Cd-contaminated soil. Two commonly grown cash crops, wheat and maize, were selected for Cd accumulation studies, and were found to be sensitive to Cd bioavailability. Results showed that the addition of colza cake may inhibit the growth of wheat and maize. Furthermore, the addition of increasing colza cake doses led to decreasing shoot and root biomass accumulation. However, increasing colza cake doses did lead to the reduction of Cd accumulation in plant tissues, as indicated by the decreasing Cd concentrations in shoots and roots. The labile concentration of Cd obtained by DGT measurements and the traditional chemical extraction methods, showed the clear decrease of Cd with the addition of increasing colza cake doses. All indicators showed significant positive correlations (p soil solution decreased with increasing colza cake doses. This was reflected by the decreases in the ratio (R) value of CDGT to Csol. Our study suggests that the sharp decrease in R values could not only reflect the extremely low capability of labile Cd to be released from its solid phase, but may also be applied to evaluate the abnormal growth of the plants. PMID:27314376

  2. The Combination of DGT Technique and Traditional Chemical Methods for Evaluation of Cadmium Bioavailability in Contaminated Soils with Organic Amendment.

    Science.gov (United States)

    Yao, Yu; Sun, Qin; Wang, Chao; Wang, Pei-Fang; Miao, Ling-Zhan; Ding, Shi-Ming

    2016-06-15

    Organic amendments have been proposed as a means of remediation for Cd-contaminated soils. However, understanding the inhibitory effects of organic materials on metal immobilization requires further research. In this study colza cake, a typical organic amendment material, was investigated in order to elucidate the ability of this material to reduce toxicity of Cd-contaminated soil. Available concentrations of Cd in soils were measured using an in situ diffusive gradients in thin films (DGT) technique in combination with traditional chemical methods, such as HOAc (aqua regia), EDTA (ethylene diamine tetraacetic acid), NaOAc (sodium acetate), CaCl₂, and labile Cd in pore water. These results were applied to predict the Cd bioavailability after the addition of colza cake to Cd-contaminated soil. Two commonly grown cash crops, wheat and maize, were selected for Cd accumulation studies, and were found to be sensitive to Cd bioavailability. Results showed that the addition of colza cake may inhibit the growth of wheat and maize. Furthermore, the addition of increasing colza cake doses led to decreasing shoot and root biomass accumulation. However, increasing colza cake doses did lead to the reduction of Cd accumulation in plant tissues, as indicated by the decreasing Cd concentrations in shoots and roots. The labile concentration of Cd obtained by DGT measurements and the traditional chemical extraction methods, showed the clear decrease of Cd with the addition of increasing colza cake doses. All indicators showed significant positive correlations (p soil solution decreased with increasing colza cake doses. This was reflected by the decreases in the ratio (R) value of CDGT to Csol. Our study suggests that the sharp decrease in R values could not only reflect the extremely low capability of labile Cd to be released from its solid phase, but may also be applied to evaluate the abnormal growth of the plants.

  3. Project Lifespan-based Nonstationary Hydrologic Design Methods for Changing Environment

    Science.gov (United States)

    Xiong, L.

    2017-12-01

    nonstationary methods versus the traditional stationary methods. There is still a long way to go for the conceptual transition from stationarity to nonstationarity in hydrologic design.

  4. A design method of oscillatory De-Qing circuit

    International Nuclear Information System (INIS)

    Feng Wenquan

    1988-01-01

    With some particular advantages the oscillatory De-Qing circuit now is widely used. However its design is very complex. By means of a quantitative analysis for this circuit a group of design formulas is obtained. According to these design formulas the maximum allowable charging inductance L c , the De-Qing network resistance R and capacitance C can easily be determined, if the PFN capacitance C N , the maximum pulse frequency F max , and percentage regulation η are given. Simple and direct formulas for specific situation are listed. Finally, a design example is given and a comparison with experimental result is made, which shows that the design method is feasible and reliable

  5. Development of probabilistic fast reactor fuel design method

    International Nuclear Information System (INIS)

    Ozawa, Takayuki

    1997-01-01

    Under the current method of evaluating fuel robustness in FBR fuel rod design, a variety of uncertain quantities including fuel production tolerance and power density are estimated conservatively. In the future, in order to proceed with improvements in the FBR core's performance and optimize the fuel's specifications, a rationalization of fuel design tolerance is required. Among the measures aimed at realizing this rationalization, the introduction of a probabilistic fast reactor fuel design method is currently under consideration. I have developed a probabilistic fast reactor fuel design code named BORNFREE, in order to make use of this method in FBR fuel design. At the same time, I have carried out a trial calculation of the cladding stress using this code and made a study and an evaluation of the possibility of employing tolerance rationalization in fuel rod design. In this paper, I provide an outline description of BORNFREE and report the results of the above study and evaluation. After performing cladding stress trial calculations using the probabilistic method, I was able to confirm that this method promises more rational design evaluation results than the conventional deterministic method. (author)

  6. Design of nuclear power generation plants adopting model engineering method

    International Nuclear Information System (INIS)

    Waki, Masato

    1983-01-01

    The utilization of model engineering as the method of design has begun about ten years ago in nuclear power generation plants. By this method, the result of design can be confirmed three-dimensionally before actual production, and it is the quick and sure method to meet the various needs in design promptly. The adoption of models aims mainly at the improvement of the quality of design since the high safety is required for nuclear power plants in spite of the complex structure. The layout of nuclear power plants and piping design require the model engineering to arrange rationally enormous quantity of things in a limited period. As the method of model engineering, there are the use of check models and of design models, and recently, the latter method has been mainly taken. The procedure of manufacturing models and engineering is explained. After model engineering has been completed, the model information must be expressed in drawings, and the automation of this process has been attempted by various methods. The computer processing of design is in progress, and its role is explained (CAD system). (Kako, I.)

  7. An improved design method of a tuned mass damper for an in-service footbridge

    Science.gov (United States)

    Shi, Weixing; Wang, Liangkun; Lu, Zheng

    2018-03-01

    Tuned mass damper (TMD) has a wide range of applications in the vibration control of footbridges. However, the traditional engineering design method may lead to a mistuned TMD. In this paper, an improved TMD design method based on the model updating is proposed. Firstly, the original finite element model (FEM) is studied and the natural characteristics of the in-service or newly built footbridge is identified by field test, and then the original FEM is updated. TMD is designed according to the new updated FEM, and it is optimized according to the simulation on vibration control effects. Finally, the installation and field measurement of TMD are carried out. The improved design method can be applied to both in-service and newly built footbridges. This paper illustrates the improved design method with an engineering example. The frequency identification results of field test and original FEM show that there is a relatively large difference between them. The TMD designed according to the updated FEM has better vibration control effect than the TMD designed according to the original FEM. The site test results show that TMD has good effect on controlling human-induced vibrations.

  8. GEPSI: A Gene Expression Profile Similarity-Based Identification Method of Bioactive Components in Traditional Chinese Medicine Formula.

    Science.gov (United States)

    Zhang, Baixia; He, Shuaibing; Lv, Chenyang; Zhang, Yanling; Wang, Yun

    2018-01-01

    The identification of bioactive components in traditional Chinese medicine (TCM) is an important part of the TCM material foundation research. Recently, molecular docking technology has been extensively used for the identification of TCM bioactive components. However, target proteins that are used in molecular docking may not be the actual TCM target. For this reason, the bioactive components would likely be omitted or incorrect. To address this problem, this study proposed the GEPSI method that identified the target proteins of TCM based on the similarity of gene expression profiles. The similarity of the gene expression profiles affected by TCM and small molecular drugs was calculated. The pharmacological action of TCM may be similar to that of small molecule drugs that have a high similarity score. Indeed, the target proteins of the small molecule drugs could be considered TCM targets. Thus, we identified the bioactive components of a TCM by molecular docking and verified the reliability of this method by a literature investigation. Using the target proteins that TCM actually affected as targets, the identification of the bioactive components was more accurate. This study provides a fast and effective method for the identification of TCM bioactive components.

  9. A comparison of two methods of teaching. Computer managed instruction and keypad questions versus traditional classroom lecture.

    Science.gov (United States)

    Halloran, L

    1995-01-01

    Computers increasingly are being integrated into nursing education. One method of integration is through computer managed instruction (CMI). Recently, technology has become available that allows the integration of keypad questions into CMI. This brings a new type of interactivity between students and teachers into the classroom. The purpose of this study was to evaluate differences in achievement between a control group taught by traditional classroom lecture (TCL) and an experimental group taught using CMI and keypad questions. Both control and experimental groups consisted of convenience samples of junior nursing students in a baccalaureate program taking a medical/surgical nursing course. Achievement was measured by three instructor-developed multiple choice examinations. Findings demonstrated that although the experimental group demonstrated increasingly higher test scores as the semester progressed, no statistical difference was found in achievement between the two groups. One reason for this may be phenomenon of vampire video. Initially, the method of presentation overshadowed the content. As students became desensitized to the method, they were able to focus and absorb more content. This study suggests that CMI and keypads are a viable teaching option for nursing education. It is equal to TCL in student achievement and provides a new level of interaction in the classroom setting.

  10. Estimating alcohol content of traditional brew in Western Kenya using culturally relevant methods: the case for cost over volume.

    Science.gov (United States)

    Papas, Rebecca K; Sidle, John E; Wamalwa, Emmanuel S; Okumu, Thomas O; Bryant, Kendall L; Goulet, Joseph L; Maisto, Stephen A; Braithwaite, R Scott; Justice, Amy C

    2010-08-01

    Traditional homemade brew is believed to represent the highest proportion of alcohol use in sub-Saharan Africa. In Eldoret, Kenya, two types of brew are common: chang'aa, spirits, and busaa, maize beer. Local residents refer to the amount of brew consumed by the amount of money spent, suggesting a culturally relevant estimation method. The purposes of this study were to analyze ethanol content of chang'aa and busaa; and to compare two methods of alcohol estimation: use by cost, and use by volume, the latter the current international standard. Laboratory results showed mean ethanol content was 34% (SD = 14%) for chang'aa and 4% (SD = 1%) for busaa. Standard drink unit equivalents for chang'aa and busaa, respectively, were 2 and 1.3 (US) and 3.5 and 2.3 (Great Britain). Using a computational approach, both methods demonstrated comparable results. We conclude that cost estimation of alcohol content is more culturally relevant and does not differ in accuracy from the international standard.

  11. The effect of non traditional teaching methods in entrepreneurship education on students entrepreneurial interest and business startups: A data article.

    Science.gov (United States)

    Olokundun, Maxwell; Moses, Chinonye Love; Iyiola, Oluwole; Ibidunni, Stephen; Ogbari, Mercy; Peter, Fred; Borishade, Taiye

    2018-08-01

    Traditional methods of teaching entrepreneurship in universities involves more theoretical approaches which are less effective in motivating considerations for an entrepreneurship career. This owes to the fact that such techniques essentially make students develop a dormant attitude rather than active participation. Expert views suggest that experiential entrepreneurship teaching methods in universities which involve practical activities and active participation can be considered salient to students' development of entrepreneurial interest an business startup potentials. This present study presents data on the extent to which experiential teaching methods in entrepreneurship adopted by Nigerian universities stimulate students' entrepreneurial interest and business startups. Data have been gathered following a descriptive cross-sectional quantitative survey conducted among university students ( N = 600) of four selected institutions in Nigeria offering a degree programme in entrepreneurship. Hierarchical Multiple Regression Analysis was used in confirming the hypothesis proposed in the study using the Statistical Package for Social Sciences (SPSS) version 22.The findings from the analysis showed that the adoption of experiential practical activities considered as best practices in entrepreneurship teaching in Nigerian universities can stimulate students' interest and drive for engaging in business start-up activities even as undergraduates. The field data set is made extensively available to allow for critical investigation.

  12. Optical description and design method with annularly stitched aspheric surface.

    Science.gov (United States)

    Cheng, De-Wen; Chen, Xue-Jiao; Xu, Chen; Hu, Yuan; Wang, Yong-Tian

    2015-12-01

    The relentless pressure for designs with new optical functions, small volume, and light weight has greatly increased the importance of aspheric surfaces. In this paper, we propose an annularly stitched aspheric surface (ASAS) description method to increase the freedom and flexibility of imaging system design. The rotationally symmetric ASAS consists of a circular central zone and one or more annular zones. Two neighboring zones are constrained to have the same derivatives on their joint curve, and this means the ASAS is C1 continuous. This finding is proved and verified by the mathematical deduction of the surface formulas. Two optimization strategies and two design methods with the C1 continuous constraints are also discussed. This surface can greatly facilitate the design and even achieve some previously impossible designs without increasing the fabrication difficulty. Two different systems with the proposed ASAS are optimized and the results are presented. The design results verified the practicability of the ASAS.

  13. Single-Case Designs and Qualitative Methods: Applying a Mixed Methods Research Perspective

    Science.gov (United States)

    Hitchcock, John H.; Nastasi, Bonnie K.; Summerville, Meredith

    2010-01-01

    The purpose of this conceptual paper is to describe a design that mixes single-case (sometimes referred to as single-subject) and qualitative methods, hereafter referred to as a single-case mixed methods design (SCD-MM). Minimal attention has been given to the topic of applying qualitative methods to SCD work in the literature. These two…

  14. Implementing Adaptive Educational Methods with IMS Learning Design

    NARCIS (Netherlands)

    Specht, Marcus; Burgos, Daniel

    2006-01-01

    Please, cite this publication as: Specht, M. & Burgos, D. (2006). Implementing Adaptive Educational Methods with IMS Learning Design. Proceedings of Adaptive Hypermedia. June, Dublin, Ireland. Retrieved June 30th, 2006, from http://dspace.learningnetworks.org

  15. Advanced Topology Optimization Methods for Conceptual Architectural Design

    DEFF Research Database (Denmark)

    Aage, Niels; Amir, Oded; Clausen, Anders

    2015-01-01

    This paper presents a series of new, advanced topology optimization methods, developed specifically for conceptual architectural design of structures. The proposed computational procedures are implemented as components in the framework of a Grasshopper plugin, providing novel capacities...

  16. Advanced Topology Optimization Methods for Conceptual Architectural Design

    DEFF Research Database (Denmark)

    Aage, Niels; Amir, Oded; Clausen, Anders

    2014-01-01

    This paper presents a series of new, advanced topology optimization methods, developed specifically for conceptual architectural design of structures. The proposed computational procedures are implemented as components in the framework of a Grasshopper plugin, providing novel capacities...

  17. Overview of the South African mechanistic pavement design analysis method

    CSIR Research Space (South Africa)

    Theyse, HL

    1996-01-01

    Full Text Available A historical overview of the South African mechanistic pavement design method, from its development in the early 1970s to the present, is presented. Material characterization, structural analysis, and pavement life prediction are discussed...

  18. Methods for design flood estimation in South Africa

    African Journals Online (AJOL)

    2012-07-04

    Jul 4, 2012 ... 1970s and are in need of updating with more than 40 years of additional data ... This paper reviews methods used for design flood estimation in South Africa and .... transposition of past experience, or a deterministic approach,.

  19. Multivariable control in nuclear power stations -survey of design methods

    International Nuclear Information System (INIS)

    Mcmorran, P.D.

    1979-12-01

    The development of larger nuclear generating stations increases the importance of dynamic interaction between controllers, because each control action may affect several plant outputs. Multivariable control provides the techniques to design controllers which perform well under these conditions. This report is a foundation for further work on the application of multivariable control in AECL. It covers the requirements of control and the fundamental mathematics used, then reviews the most important linear methods, based on both state-space and frequency-response concepts. State-space methods are derived from analysis of the system differential equations, while frequency-response methods use the input-output transfer function. State-space methods covered include linear-quadratic optimal control, pole shifting, and the theory of state observers and estimators. Frequency-response methods include the inverse Nyquist array method, and classical non-interactive techniques. Transfer-function methods are particularly emphasized since they can incorporate ill-defined design criteria. The underlying concepts, and the application strengths and weaknesses of each design method are presented. A review of significant applications is also given. It is concluded that the inverse Nyquist array method, a frequency-response technique based on inverse transfer-function matrices, is preferred for the design of multivariable controllers for nuclear power plants. This method may be supplemented by information obtained from a modal analysis of the plant model. (auth)

  20. New knowledge network evaluation method for design rationale management

    Science.gov (United States)

    Jing, Shikai; Zhan, Hongfei; Liu, Jihong; Wang, Kuan; Jiang, Hao; Zhou, Jingtao

    2015-01-01

    Current design rationale (DR) systems have not demonstrated the value of the approach in practice since little attention is put to the evaluation method of DR knowledge. To systematize knowledge management process for future computer-aided DR applications, a prerequisite is to provide the measure for the DR knowledge. In this paper, a new knowledge network evaluation method for DR management is presented. The method characterizes the DR knowledge value from four perspectives, namely, the design rationale structure scale, association knowledge and reasoning ability, degree of design justification support and degree of knowledge representation conciseness. The DR knowledge comprehensive value is also measured by the proposed method. To validate the proposed method, different style of DR knowledge network and the performance of the proposed measure are discussed. The evaluation method has been applied in two realistic design cases and compared with the structural measures. The research proposes the DR knowledge evaluation method which can provide object metric and selection basis for the DR knowledge reuse during the product design process. In addition, the method is proved to be more effective guidance and support for the application and management of DR knowledge.

  1. A concept for a usability focused design method

    NARCIS (Netherlands)

    Hoolhorst, F.W.B.; van der Voort, Mascha C.

    2009-01-01

    Many user-centered design methods (UCDM) have been developed within the last decades. However, industry increasingly demands for a new-generation UCDM since only few of the existing UCDM seem to be applicable to the daily design practice. This paper first discusses the main criteria regarding such

  2. The Sources and Methods of Engineering Design Requirement

    DEFF Research Database (Denmark)

    Li, Xuemeng; Zhang, Zhinan; Ahmed-Kristensen, Saeema

    2014-01-01

    to be defined in a new context. This paper focuses on understanding the design requirement sources at the requirement elicitation phase. It aims at proposing an improved design requirement source classification considering emerging markets and presenting current methods for eliciting requirement for each source...

  3. CEPIAH, a method for Evaluation and Design of Pedagogical Hypermedia

    OpenAIRE

    Trigano , Philippe; Pacurar Giacomini , Ecaterina

    2004-01-01

    We are working on a method, called CEPIAH. We propose a web based system used to help teachers to design multimedia documents and to evaluate their prototypes. Our tool integrates two modules such as EMPI (Evaluation of Multimedia Pedagogical and Interactive software), and SP/UL/FC, a method for designing pedagogical hypermedia. The EMPI module is used to evaluate multimedia software used in educational context. We structured a knowledge base composed of a list of evaluation criteria, grouped...

  4. The Innovative Bike Conceptual Design by Using Modified Functional Element Design Method

    Directory of Open Access Journals (Sweden)

    Nien-Te Liu

    2016-11-01

    Full Text Available The purpose of the study is to propose a new design process by modifying functional element design approach which can commence a large amount of innovative concepts within a short period of time. Firstly, the original creative functional elements design method is analyzed and the drawbacks are discussed. Then, the modified is proposed and is divided into 6 steps. The creative functional element representations, generalization, specialization, and particularization are used in this method. Every step is described clearly, and users could design by following the process easily. In this paper, a clear and accurate design process is proposed based on the creative functional element design method. By following this method, a lot of innovative bicycles will be created quickly.

  5. Study on design method for seismically isolated FBR plants

    International Nuclear Information System (INIS)

    Hirata, Kazuta; Yabana, Shuichi; Ohtori, Yasuki; Ishida, Katsuhiko; Sawada, Yoshihiro; Shiojiri; Hiroo; Mazda, Taiji

    1998-01-01

    CRIEPI conducted 'Demonstration test on FBR seismic isolation system' from 1987 to 1996 under contract with Ministry of International Trade and Industry, Japan. In the demonstration test, base isolation technologies are prepared and demonstrated to apply to FBR and the design guidelines are proposed. In this report overall contents of the design guidelines entitled Design guidelines for seismically base isolated FBR plants' are included. The design guidelines, as a rule, are limited to apply to FBR plants where entire reactor building is isolated in the horizontal direction using laminated rubber bearings as isolators. The design guidelines and its concepts, however, will be useful for the development of similar guidelines for other isolation systems using different type of isolation methods and other nuclear facilities. The design guidelines consist of three parts and appendices. The first part is 'Policy for Safety Design of Base Isolated FBR Plants' specifying the principles and the requirements in the planning and the design for the safety of base isolated FBR plants. The second part is Policy for Seismic Design of Base Isolated FBR' describing the principles and the requirements in the seismic design and the evaluation of safety for base isolated FBR plants. The third part is 'Design Methods for Seismic Isolated FBR Plants' detailing the methods, procedures and parameters to be used in the design and the evaluation of safety fro base isolated FBR plants. In appendices examples of design procedures for base isolated reactor building and laminated rubber bearings as well as various test data on laminated rubber bearings, etc. are shown. (author)

  6. Integrated airfoil and blade design method for large wind turbines

    DEFF Research Database (Denmark)

    Zhu, Wei Jun; Shen, Wen Zhong; Sørensen, Jens Nørkær

    2014-01-01

    This paper presents an integrated method for designing airfoil families of large wind turbine blades. For a given rotor diameter and a tip speed ratio, optimal airfoils are designed based on the local speed ratios. To achieve a high power performance at low cost, the airfoils are designed...... with the objectives of high Cp and small chord length. When the airfoils are obtained, the optimum flow angle and rotor solidity are calculated which forms the basic input to the blade design. The new airfoils are designed based on a previous in-house designed airfoil family which was optimized at a Reynolds number...... of 3 million. A novel shape perturbation function is introduced to optimize the geometry based on the existing airfoils which simplifies the design procedure. The viscous/inviscid interactive code XFOIL is used as the aerodynamic tool for airfoil optimization at a Reynolds number of 16 million...

  7. Synthesis of Black and Red Mercury Sulfide Nano-Powder by Traditional Indian Method for Biomedical Application

    International Nuclear Information System (INIS)

    Padhi, Payodhar; Sahoo, G.; Das, K.; Ghosh, Sudipto; Panigrahi, S. C.

    2008-01-01

    The use of metals and minerals in the traditional Indian system of medicine known as aired is very common and is practiced since seventh century B.C. Metals were reduced to calcined powder form for medicinal purpose. For detoxification, a further step of purification of the metals and minerals with different vegetable extracts was practiced. The people of East India were using mercury and its sulfide as medicine. Gradually this secret was leaked to Arabic physicians who used mercury in skin ointment. Subsequently Italian Physicians adopted Arabic prescriptions of mercurial ointments for skin diseases. In the olden days, metals and minerals were impregnated with decoction and juice of vegetables and animal products like milk and fat for purification. These were then reduced to fine particles by milling with a pestle and mortar. It was known by then that the fineness of the powder had a significant influence on the color, texture, and medicinal properties as is cited by Charak. Nagarjun studied in detail the processing of metals and minerals, particularly mercury and the influence of the processing parameters on the medicinal values. Mercury is unique in many aspects. Indian alchemy developed a wide variety a chemical processes for the ostensible transmutation of metals and preparation of elixir of life, in which mercury occupied a prime position .The present investigation attempts to use the traditional methods as prescribed in the ancient texts to prepare mercury sulfide in both red and black form for medicinal use. XRD, SEM and HRTEM investigations of the sulfides obtained shows that the ancient Indians were able to produce nano-sized powders. Possibly this may be taken as the earliest application of the production and use of nano powder. The study proves that even in ancient time the knowledge of nano particle synthesis was prevalent and used to enhance effectiveness of medicines. Further mercury in the free form is not acceptable in medicines. The ancient

  8. Synthesis of Black and Red Mercury Sulfide Nano-Powder by Traditional Indian Method for Biomedical Application

    Science.gov (United States)

    Padhi, Payodhar; Sahoo, G.; Das, K.; Ghosh, Sudipto; Panigrahi, S. C.

    2008-10-01

    The use of metals and minerals in the traditional Indian system of medicine known as aired is very common and is practiced since seventh century B.C. Metals were reduced to calcined powder form for medicinal purpose. For detoxification, a further step of purification of the metals and minerals with different vegetable extracts was practiced. The people of East India were using mercury and its sulfide as medicine. Gradually this secret was leaked to Arabic physicians who used mercury in skin ointment. Subsequently Italian Physicians adopted Arabic prescriptions of mercurial ointments for skin diseases. In the olden days, metals and minerals were impregnated with decoction and juice of vegetables and animal products like milk and fat for purification. These were then reduced to fine particles by milling with a pestle and mortar. It was known by then that the fineness of the powder had a significant influence on the color, texture, and medicinal properties as is cited by Charak. Nagarjun studied in detail the processing of metals and minerals, particularly mercury and the influence of the processing parameters on the medicinal values. Mercury is unique in many aspects. Indian alchemy developed a wide variety a chemical processes for the ostensible transmutation of metals and preparation of elixir of life, in which mercury occupied a prime position .The present investigation attempts to use the traditional methods as prescribed in the ancient texts to prepare mercury sulfide in both red and black form for medicinal use. XRD, SEM and HRTEM investigations of the sulfides obtained shows that the ancient Indians were able to produce nano-sized powders. Possibly this may be taken as the earliest application of the production and use of nano powder. The study proves that even in ancient time the knowledge of nano particle synthesis was prevalent and used to enhance effectiveness of medicines. Further mercury in the free form is not acceptable in medicines. The ancient

  9. Field test comparison of an autocorrelation technique for determining grain size using a digital 'beachball' camera versus traditional methods

    Science.gov (United States)

    Barnard, P.L.; Rubin, D.M.; Harney, J.; Mustain, N.

    2007-01-01

    This extensive field test of an autocorrelation technique for determining grain size from digital images was conducted using a digital bed-sediment camera, or 'beachball' camera. Using 205 sediment samples and >1200 images from a variety of beaches on the west coast of the US, grain size ranging from sand to granules was measured from field samples using both the autocorrelation technique developed by Rubin [Rubin, D.M., 2004. A simple autocorrelation algorithm for determining grain size from digital images of sediment. Journal of Sedimentary Research, 74(1): 160-165.] and traditional methods (i.e. settling tube analysis, sieving, and point counts). To test the accuracy of the digital-image grain size algorithm, we compared results with manual point counts of an extensive image data set in the Santa Barbara littoral cell. Grain sizes calculated using the autocorrelation algorithm were highly correlated with the point counts of the same images (r2 = 0.93; n = 79) and had an error of only 1%. Comparisons of calculated grain sizes and grain sizes measured from grab samples demonstrated that the autocorrelation technique works well on high-energy dissipative beaches with well-sorted sediment such as in the Pacific Northwest (r2 ??? 0.92; n = 115). On less dissipative, more poorly sorted beaches such as Ocean Beach in San Francisco, results were not as good (r2 ??? 0.70; n = 67; within 3% accuracy). Because the algorithm works well compared with point counts of the same image, the poorer correlation with grab samples must be a result of actual spatial and vertical variability of sediment in the field; closer agreement between grain size in the images and grain size of grab samples can be achieved by increasing the sampling volume of the images (taking more images, distributed over a volume comparable to that of a grab sample). In all field tests the autocorrelation method was able to predict the mean and median grain size with ???96% accuracy, which is more than

  10. The Combination of DGT Technique and Traditional Chemical Methods for Evaluation of Cadmium Bioavailability in Contaminated Soils with Organic Amendment

    Directory of Open Access Journals (Sweden)

    Yu Yao

    2016-06-01

    Full Text Available Organic amendments have been proposed as a means of remediation for Cd-contaminated soils. However, understanding the inhibitory effects of organic materials on metal immobilization requires further research. In this study colza cake, a typical organic amendment material, was investigated in order to elucidate the ability of this material to reduce toxicity of Cd-contaminated soil. Available concentrations of Cd in soils were measured using an in situ diffusive gradients in thin films (DGT technique in combination with traditional chemical methods, such as HOAc (aqua regia, EDTA (ethylene diamine tetraacetic acid, NaOAc (sodium acetate, CaCl2, and labile Cd in pore water. These results were applied to predict the Cd bioavailability after the addition of colza cake to Cd-contaminated soil. Two commonly grown cash crops, wheat and maize, were selected for Cd accumulation studies, and were found to be sensitive to Cd bioavailability. Results showed that the addition of colza cake may inhibit the growth of wheat and maize. Furthermore, the addition of increasing colza cake doses led to decreasing shoot and root biomass accumulation. However, increasing colza cake doses did lead to the reduction of Cd accumulation in plant tissues, as indicated by the decreasing Cd concentrations in shoots and roots. The labile concentration of Cd obtained by DGT measurements and the traditional chemical extraction methods, showed the clear decrease of Cd with the addition of increasing colza cake doses. All indicators showed significant positive correlations (p < 0.01 with the accumulation of Cd in plant tissues, however, all of the methods could not reflect plant growth status. Additionally, the capability of Cd to change from solid phase to become available in a soil solution decreased with increasing colza cake doses. This was reflected by the decreases in the ratio (R value of CDGT to Csol. Our study suggests that the sharp decrease in R values could not only

  11. Evaluation of a method to determine the natural occurrence of aflatoxins in commercial traditional herbal medicines from Malaysia and Indonesia.

    Science.gov (United States)

    Ali, N; Hashim, N H; Saad, B; Safan, K; Nakajima, M; Yoshizawa, T

    2005-12-01

    Traditional herbal medicines, popularly known as 'jamu' and 'makjun' in Malaysia and Indonesia, are consumed regularly to promote health. In consideration of their frequent and prolonged consumption, the natural occurrence of aflatoxins (AF) in these products was determined using immunoaffinity column clean-up and high-performance liquid chromatography with pre-column derivatization. The evaluated method, which entails dilution of sample extracts with Tween 20-phosphate buffered saline (1:9, v/v) and a chromatographic system using isocratic mobile phase composed of water-methanol-acetonitrile (70:20:10, v/v/v), was effective in separating AFB1, AFG1 and AFG2 from interference at their retention times. Results were confirmed using post-column derivatization with photochemical reactor. For 23 commercial samples analyzed, mean levels (incidence) of AFB(1), AFB(2) and AFG1 in positive samples were 0.26 (70%), 0.07 (61%) and 0.10 (30%) microg/kg, respectively; one sample was positive for AFG2 at a level of 0.03 (4%) microg/kg. In contrast to the high levels of AF in crude herbal drugs and medicinal plants reported previously by other researchers, the low contamination levels reported in this study may be attributed to the higher selectivity to AF of the method applied. Based on the AFB1 levels and the daily consumption of positive samples, a mean probable daily intake of 0.022 ng/kg body weight was calculated.

  12. [Research progress on standardization study of NIR spectroscopy based method for quality control of traditional Chinese medicine].

    Science.gov (United States)

    Li, Wen-Long; Qu, Hai-Bin

    2016-10-01

    In recent years, the near infrared (NIR) spectroscopy has gained wide acceptance within the quantitative analysis of traditional Chinese medicine (TCM). However, the lack of technical standards is the bottleneck problem in this process. To address this issue, standardization study of the NIR spectroscopy based method for the quantitative analysis of TCM is needed, in which the specific characteristics of TCM should be given full considerations. The main research contents include:the scope definition for the application of NIR spectroscopy in the TCM quantitative analysis field, the selection criteria for the sample pretreatment and spectral acquisition conditions, the rules for the model optimization and evaluation, and the regulations for the model update and transfer. In this paper, some foreign studies in the agricultural areas are reviewed for reference. Different chemometrics methods reported in the literature are investigated and compared systematically. This research is important actual significance to the theoretical development of NIR spectroscopy analytical techniques, and will effectively promote the application of the technology in the TCM industry. Furthermore, it is beneficial to improve the technical level of TCM quality control, and can also be used as references to achieve similar purposes for other natural products. Copyright© by the Chinese Pharmaceutical Association.

  13. Compression method of anastomosis of large intestines by implants with memory of shape: alternative to traditional sutures

    Directory of Open Access Journals (Sweden)

    F. Sh. Aliev

    2015-01-01

    Full Text Available Research objective. To prove experimentally the possibility of forming a compression colonic anastomoses using nickel-titanium devices in comparison with traditional methods of anastomosis. Materials and methods. In experimental studies the quality of the compression anastomosis of the colon in comparison with sutured and stapled anastomoses was performed. There were three experimental groups in mongrel dogs formed: in the 1st series (n = 30 compression anastomoses nickel-titanium implants were formed; in the 2nd (n = 25 – circular stapling anastomoses; in the 3rd (n = 25 – ligature way to Mateshuk– Lambert. In the experiment the physical durability, elasticity, and biological tightness, morphogenesis colonic anastomoses were studied. Results. Optimal sizes of compression devices are 32 × 18 and 28 × 15 mm with a wire diameter of 2.2 mm, the force of winding compression was 740 ± 180 g/mm2. Compression suture has a higher physical durability compared to stapled (W = –33.0; p < 0.05 and sutured (W = –28.0; p < 0.05, higher elasticity (p < 0.05 in all terms of tests and biological tightness since 3 days (p < 0.001 after surgery. The regularities of morphogenesis colonic anastomoses allocated by 4 periods of the regeneration of intestinal suture. Conclusion. Obtained experimental data of the use of compression anastomosis of the colon by the nickel-titanium devices are the convincing arguments for their clinical application. 

  14. The method of quality marker research and quality evaluation of traditional Chinese medicine based on drug properties and effect characteristics.

    Science.gov (United States)

    Zhang, Tiejun; Bai, Gang; Han, Yanqi; Xu, Jun; Gong, Suxiao; Li, Yazhuo; Zhang, Hongbing; Liu, Changxiao

    2018-05-15

    Quality of traditional Chinese medicine (TCM) plays a critical role in industry of TCM. Rapid development of TCM pharmaceutical areas is, however, greatly limited, since there are many issues not been resolved, concerning the quality study of TCM. Core concept of TCM quality as well as the characteristics of TCM was discussed, in order to guide the quality research and evaluation of TCM, further improve the level of TCM quality control. In this review, on the basis of systematic analysis of fundamental property and features of TCM in clinical application, the approaches and methods of quality marker (Q-marker) study were proposed through combination of transitivity and traceability of essentials of quality, correlation between chemical ingredients and drug property/efficacy, as well as analysis of endemicity of ingredients sharing similar pharmacophylogenetic and biosynthetic approaches. The approaches and methods of Q-marker study were proposed and the novel integrated pattern for quality assessment and control of TCM was established. The core concept of Q-marker has helped to break through the bottleneck of the current fragmented quality research of TCM and improved the scientificity, integrity and systematicness of quality control. Copyright © 2018 Elsevier GmbH. All rights reserved.

  15. Generic methods for design of small-bore pipe supports

    International Nuclear Information System (INIS)

    Clark, G.L.; LaSalle, F.R.

    1981-01-01

    Large numbers of supports for small-bore, low-temperature pipe are utilized in nuclear power plants. These supports often must meet ASME code and project seismic design requirements. Detailed analysis for each support is time consuming and costly. This paper describes some economical generic methods developed to design and qualify supports for two-inch and smaller pipe operating at temperatures less than 300 0 F (185 0 C), on the Fast Flux Test Facility. Use of standard designs, standard support spacing tables, anchor bolt and baseplate considerations, and field qualification methods are discussed

  16. IDEF method for designing seismic information system in CTBT verification

    International Nuclear Information System (INIS)

    Zheng Xuefeng; Shen Junyi; Jin Ping; Zhang Huimin; Zheng Jiangling; Sun Peng

    2004-01-01

    Seismic information system is of great importance for improving the capability of CTBT verification. A large amount of money has been appropriated for the research in this field in the U.S. and some other countries in recent years. However, designing and developing a seismic information system involves various technologies about complex system design. This paper discusses the IDEF0 method to construct function models and the IDEF1x method to make information models systemically, as well as how they are used in designing seismic information system in CTBT verification. (authors)

  17. Comparison of computer-assisted instruction (CAI) versus traditional textbook methods for training in abdominal examination (Japanese experience).

    Science.gov (United States)

    Qayumi, A K; Kurihara, Y; Imai, M; Pachev, G; Seo, H; Hoshino, Y; Cheifetz, R; Matsuura, K; Momoi, M; Saleem, M; Lara-Guerra, H; Miki, Y; Kariya, Y

    2004-10-01

    This study aimed to compare the effects of computer-assisted, text-based and computer-and-text learning conditions on the performances of 3 groups of medical students in the pre-clinical years of their programme, taking into account their academic achievement to date. A fourth group of students served as a control (no-study) group. Participants were recruited from the pre-clinical years of the training programmes in 2 medical schools in Japan, Jichi Medical School near Tokyo and Kochi Medical School near Osaka. Participants were randomly assigned to 4 learning conditions and tested before and after the study on their knowledge of and skill in performing an abdominal examination, in a multiple-choice test and an objective structured clinical examination (OSCE), respectively. Information about performance in the programme was collected from school records and students were classified as average, good or excellent. Student and faculty evaluations of their experience in the study were explored by means of a short evaluation survey. Compared to the control group, all 3 study groups exhibited significant gains in performance on knowledge and performance measures. For the knowledge measure, the gains of the computer-assisted and computer-assisted plus text-based learning groups were significantly greater than the gains of the text-based learning group. The performances of the 3 groups did not differ on the OSCE measure. Analyses of gains by performance level revealed that high achieving students' learning was independent of study method. Lower achieving students performed better after using computer-based learning methods. The results suggest that computer-assisted learning methods will be of greater help to students who do not find the traditional methods effective. Explorations of the factors behind this are a matter for future research.

  18. Simulation methods to estimate design power: an overview for applied research.

    Science.gov (United States)

    Arnold, Benjamin F; Hogan, Daniel R; Colford, John M; Hubbard, Alan E

    2011-06-20

    Estimating the required sample size and statistical power for a study is an integral part of study design. For standard designs, power equations provide an efficient solution to the problem, but they are unavailable for many complex study designs that arise in practice. For such complex study designs, computer simulation is a useful alternative for estimating study power. Although this approach is well known among statisticians, in our experience many epidemiologists and social scientists are unfamiliar with the technique. This article aims to address this knowledge gap. We review an approach to estimate study power for individual- or cluster-randomized designs using computer simulation. This flexible approach arises naturally from the model used to derive conventional power equations, but extends those methods to accommodate arbitrarily complex designs. The method is universally applicable to a broad range of designs and outcomes, and we present the material in a way that is approachable for quantitative, applied researchers. We illustrate the method using two examples (one simple, one complex) based on sanitation and nutritional interventions to improve child growth. We first show how simulation reproduces conventional power estimates for simple randomized designs over a broad range of sample scenarios to familiarize the reader with the approach. We then demonstrate how to extend the simulation approach to more complex designs. Finally, we discuss extensions to the examples in the article, and provide computer code to efficiently run the example simulations in both R and Stata. Simulation methods offer a flexible option to estimate statistical power for standard and non-traditional study designs and parameters of interest. The approach we have described is universally applicable for evaluating study designs used in epidemiologic and social science research.

  19. Urban and Building Design Methods for Resource Management

    DEFF Research Database (Denmark)

    Sattrup, Peter Andreas

    2014-01-01

    . Having a structured approach to design methods, a design methodology, is a fundamental aid in decisionmaking and resource management through design. At DTU Civil Engineering experiments are made in crossdisciplinary collaboration between engineers of different specializations and outside collaborators...... but a fewdimensions. Engineers may influence decision making at all levels, and do in many instances have directresponsibility for decision making, - however many (Civil) engineers don’t really think of themselves asdesigners. However this perception is changing. Engineering is fundamentally a design discipline...... management and decision support regardingthe development of the built environment towards a sustainable future....

  20. A Newly Designed Tennis Elbow Orthosis With a Traditional Tennis Elbow Strap in Patients With Lateral Epicondylitis

    Science.gov (United States)

    Saremi, Hossein; Chamani, Vahid; Vahab-Kashani, Reza

    2016-01-01

    Background Lateral epicondylitis is a common cause of pain and upper limb dysfunction. The use of counterforce straps for treatment of lateral epicondylitis is widespread. This kind of orthosis can be modified to have a greater effect on relieving pain by reducing tension on the origin of the extensor pronator muscles. Objectives To determine the immediate effects of a newly designed orthosis on pain and grip strength in patients with lateral epicondylitis. Materials and Methods Twelve participants (six men and six women) were recruited (mean age = 41 ± 6.7 years) and evaluated for pain and grip strength in three sessions. A 48-hour break was taken between each session. The first session was without any orthosis, the second session was with the new modified tennis elbow orthosis, and the third session was with a conventional tennis elbow strap. Results Both counterforce straps were effective. However, significantly more improvement was observed in pain and grip strength after using the newly modified orthosis (P < 0.05). Conclusions The newly designed strap reduces pain more effectively and improves grip strength by causing greater localized pressure on two regions with different force applications (two component vectors versus one). PMID:28180116

  1. Designing waveforms for temporal encoding using a frequency sampling method

    DEFF Research Database (Denmark)

    Gran, Fredrik; Jensen, Jørgen Arendt

    2007-01-01

    was compared to a linear frequency modulated signal with amplitude tapering, previously used in clinical studies for synthetic transmit aperture imaging. The latter had a relatively flat spectrum which implied that the waveform tried to excite all frequencies including ones with low amplification. The proposed......In this paper a method for designing waveforms for temporal encoding in medical ultrasound imaging is described. The method is based on least squares optimization and is used to design nonlinear frequency modulated signals for synthetic transmit aperture imaging. By using the proposed design method...... waveform, on the other hand, was designed so that only frequencies where the transducer had a large amplification were excited. Hereby, unnecessary heating of the transducer could be avoided and the signal-tonoise ratio could be increased. The experimental ultrasound scanner RASMUS was used to evaluate...

  2. Fuel cell design using a new heuristic method

    International Nuclear Information System (INIS)

    Perusquia, R.; Montes T, J. L.; Ortiz S, J. J.; Castillo M, A.

    2014-10-01

    In this paper a new method for the pre-design of a typical fuel cell with a structural array of 10 x 10 fuel elements for a BWR is presented. The method is based on principles of maximum dispersion and minimum peaks of local power within the array of fuel elements. The pre-design of the fuel cells is made by simulation in two dimensions (2-D) through the cells physics code CASMO-4. For this purpose of pre-design the search process is guided by an objective function which is a combination of the main neutronic parameters of the fuel cell. The results show that the method is a promising tool that could be used for the design of fuel cells for use in a nuclear plant BWR. (Author)

  3. A rapid method for soil cement design : Louisiana slope value method.

    Science.gov (United States)

    1964-03-01

    The current procedure used by the Louisiana Department of Highways for laboratory design of cement stabilized soil base and subbase courses is taken from standard AASHO test methods, patterned after Portland Cement Association criteria. These methods...

  4. Designing, Teaching, and Evaluating Two Complementary Mixed Methods Research Courses

    Science.gov (United States)

    Christ, Thomas W.

    2009-01-01

    Teaching mixed methods research is difficult. This longitudinal explanatory study examined how two classes were designed, taught, and evaluated. Curriculum, Research, and Teaching (EDCS-606) and Mixed Methods Research (EDCS-780) used a research proposal generation process to highlight the importance of the purpose, research question and…

  5. The co-constructing stories method : feedback of designers on use of the method in real design cases

    NARCIS (Netherlands)

    Buskermolen, D.; Terken, J.M.B.; Eggen, J.H.

    2015-01-01

    In this paper we present the "Co-constructing Stories" method, aiming to elicit feedback from end-users on novel design concepts in the early phases of the design process. In sessions of less than an hour, participants are prompted by a storyboard depicting the current situation to recollect

  6. Towards a culturally independent participatory design method: Fusing game elements into the design process

    DEFF Research Database (Denmark)

    Jensen, Mika Yasuoka; Nakatani, Momoko; Ohno, Takehiko

    2013-01-01

    Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent ...... imply that the introduction of game elements allows PD to be effectively utilized in culturally diverse settings.......Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent PD...... method called the ICT Service Design Game to ease the prevailing concern that PD has limited applicability in other cultural settings. We conduct four experiments on ICT Service Design Game in Scandinavia and Asia to evaluate its feasibility. The experiments identify some differences in the PD process...

  7. Endurance time method for Seismic analysis and design of structures

    International Nuclear Information System (INIS)

    Estekanchi, H.E.; Vafai, A.; Sadeghazar, M.

    2004-01-01

    In this paper, a new method for performance based earthquake analysis and design has been introduced. In this method, the structure is subjected to accelerograms that impose increasing dynamic demand on the structure with time. Specified damage indexes are monitored up to the collapse level or other performance limit that defines the endurance limit point for the structure. Also, a method for generating standard intensifying accelerograms has been described. Three accelerograms have been generated using this method. Furthermore, the concept of Endurance Time has been described by applying these accelerograms to single and multi degree of freedom linear systems. The application of this method for analysis of complex nonlinear systems has been explained. Endurance Time method provides a uniform approach to seismic analysis and design of complex structures that can be applied in numerical and experimental investigations

  8. Integrated airfoil and blade design method for large wind turbines

    DEFF Research Database (Denmark)

    Zhu, Wei Jun; Shen, Wen Zhong

    2013-01-01

    This paper presents an integrated method for designing airfoil families of large wind turbine blades. For a given rotor diameter and tip speed ratio, the optimal airfoils are designed based on the local speed ratios. To achieve high power performance at low cost, the airfoils are designed...... with an objective of high Cp and small chord length. When the airfoils are obtained, the optimum flow angle and rotor solidity are calculated which forms the basic input to the blade design. The new airfoils are designed based on the previous in-house airfoil family which were optimized at a Reynolds number of 3...... million. A novel shape perturbation function is introduced to optimize the geometry on the existing airfoils and thus simplify the design procedure. The viscos/inviscid code Xfoil is used as the aerodynamic tool for airfoil optimization where the Reynolds number is set at 16 million with a free...

  9. Design of Online Report Writing Based on Constructive and Cooperative Learning for a Course on Traditional General Physics Experiments

    Science.gov (United States)

    Lo, Hao-Chang

    2013-01-01

    The objective of this study was to develop an online report writing activity that was a constructive and cooperative learning process for a course on traditional general physics experiments. Wiki, a CMC authoring tool, was used to construct the writing platform. Fifty-eight undergraduate students (33 men and 25 women), working in randomly assigned…

  10. SSFI and SSOMI new method of evaluating design

    International Nuclear Information System (INIS)

    Tolson, G.M.

    1992-01-01

    The NRC has developed a new inspection method which has proven its effectiveness in evaluating design organizations. The new method is used in two types of NRC inspections, Safety System Functional Inspection (SSFI), and Safety System Outage Modification Inspection (SSOMI). The SSFI/SSOMI audits were developed following an event which brought a nuclear power plant close to a core meltdown. That event was caused by a series of problems which would not have been found using conventional methods. The SSFI and SSOMI audits involve intense technical evaluation of a nuclear system to determine wheter the system will function as designed. The SSFI/SSOMI method normally uses eight to fifteen engineers with different fields of expertise to evaluate a system, or a change to a system in the case of a SSOMI. The effectiveness of each engineer's input is amplified in a series of open, questioning, free-wheeling, brainstorming-type team meetings. During the team meetings, all aspects of the audit are controlled by a consensus of the team members. The findings from these new methods are surprisingly consistent, regardless of which organization is audited or which organization performs the audit. This consistency implies a widespread generic weakness in the manner design is being performed. This paper addresses generic findings and recommends increased use of these new methods to evaluate design organizations. These audit methods can be readily used to evaluate any process or system. (orig.)

  11. Advances in product family and product platform design methods & applications

    CERN Document Server

    Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

    2014-01-01

    Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

  12. 77 FR 32632 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

    Science.gov (United States)

    2012-06-01

    ... Methods: Designation of Three New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION... accordance with 40 CFR Part 53, three new equivalent methods: One for measuring concentrations of nitrogen... INFORMATION: In accordance with regulations at 40 CFR Part 53, the EPA evaluates various methods for...

  13. Designing a risk communication strategy for health hazards posed by traditional slaughter of goats in Tshwane, South Africa

    Directory of Open Access Journals (Sweden)

    Daniel N. Qekwana

    2014-08-01

    Full Text Available In African societies, traditional slaughter is linked to celebrations like weddings or births, as well as funerals and ancestor veneration. Participants in traditional slaughter of goats are at risk of exposure to hazards during slaughter, food preparation and consumption of goat meat. For risk mitigation strategies to be implemented, identification of the population at risk is required. This study is based on the premise that the demographic profile of people involved in traditional slaughter of goats is important for risk communication. Both structured and informal interviews were recorded and analysed using a thematic analysis. A total of 105 people were interviewed at taxi ranks in Tshwane, Gauteng. Of these, 48 were women and 57 men. The median age of women and men was 40.6 years and 44.3 years, respectively. The majority of respondents (61.9%, n = 65 interviewed were from the Gauteng Province. Sixty percent (n = 63 of respondents had a secondary education, whilst less than 4.81% (n = 5 of respondents had no formal education. This study demonstrated that interviewing commuters at taxi ranks gave access to a cross section of gender, age, language and origin. It was found that both genders were involved in traditional slaughter of goats. Risk communication strategies should thus target women as well as men. Communication strategies to mitigate the risks of traditional slaughter of goats should take into consideration the dynamic nature of demographic and cultural norms. In light of the wide demographic profile of the respondents, it was concluded that it should be possible to use taxi ranks for successful dissemination of food safety and occupational health risk mitigation messages.

  14. Methods for air cleaning system design and accident analysis

    International Nuclear Information System (INIS)

    Gregory, W.S.; Nichols, B.D.

    1987-01-01

    This paper describes methods, in the form of a handbook and five computer codes, that can be used for nuclear facility air cleaning system design and accident analysis. Four of the codes were developed primarily at the Los Alamos National Laboratory, and one was developed in France. Tools such as these are used to design ventilation systems in the mining industry but do not seem to be commonly used in the nuclear industry. For example, the Nuclear Air Cleaning Handbook is an excellent design reference, but it fails to include information on computer codes that can be used to aid in the design process. These computer codes allow the analyst to use the handbook information to form all the elements of a complete system design. Because these analysis methods are in the form of computer codes they allow the analyst to investigate many alternative designs. In addition, the effects of many accident scenarios on the operation of the air cleaning system can be evaluated. These tools originally were intended for accident analysis, but they have been used mostly as design tools by several architect-engineering firms. The Cray, VAX, and personal computer versions of the codes, an accident analysis handbook, and the codes availability will be discussed. The application of these codes to several design operations of nuclear facilities will be illustrated, and their use to analyze the effect of several accident scenarios also will be described

  15. Adaptive design methods in clinical trials – a review

    Directory of Open Access Journals (Sweden)

    Chang Mark

    2008-05-01

    Full Text Available Abstract In recent years, the use of adaptive design methods in clinical research and development based on accrued data has become very popular due to its flexibility and efficiency. Based on adaptations applied, adaptive designs can be classified into three categories: prospective, concurrent (ad hoc, and retrospective adaptive designs. An adaptive design allows modifications made to trial and/or statistical procedures of ongoing clinical trials. However, it is a concern that the actual patient population after the adaptations could deviate from the originally target patient population and consequently the overall type I error (to erroneously claim efficacy for an infective drug rate may not be controlled. In addition, major adaptations of trial and/or statistical procedures of on-going trials may result in a totally different trial that is unable to address the scientific/medical questions the trial intends to answer. In this article, several commonly considered adaptive designs in clinical trials are reviewed. Impacts of ad hoc adaptations (protocol amendments, challenges in by design (prospective adaptations, and obstacles of retrospective adaptations are described. Strategies for the use of adaptive design in clinical development of rare diseases are discussed. Some examples concerning the development of Velcade intended for multiple myeloma and non-Hodgkin's lymphoma are given. Practical issues that are commonly encountered when implementing adaptive design methods in clinical trials are also discussed.

  16. Renewing Theories, Methods and Design Practices: Challenges for Architectural Education

    Directory of Open Access Journals (Sweden)

    Andri Yatmo Yandi

    2018-01-01

    Full Text Available Architectural education should promote the advancement of knowledge that is necessary as the basis for the development of excellent design practice. Architectural education needs to respond appropriately to the current issues in the society. To find its way into the society in an appropriate way, architecture needs to be liquid. The ability to address the liquidity of architecture requires educational approach that promotes the ability to work with a range of design methods and approaches. There are several principles that become the basis for developing architectural education that could strengthen its position within the society: to promote knowledge-based design practice, to embrace variety of design methods and approaches; to keep a balance between design knowledge and design skills; while at the same time to aim for mastery and excellence in design. These principles should be the basis for defining and developing the curriculum and the process of design learning architectural education. Then the main challenge is on our willingness to be liquid in developing architectural education, which needs continuous renewal and update to respond to the changing context of knowledge, technology and society.

  17. The Applicability of Traditional Protection Methods to Lines Emanating from VSC-HVDC Interconnectors and a Novel Protection Principle

    Directory of Open Access Journals (Sweden)

    Shimin Xue

    2016-05-01

    Full Text Available Voltage source converter (VSC-based high voltage direct current (VSC-HVDC interconnectors can realize accurate and fast control of power transmission among AC networks, and provide emergency power support for AC networks. VSC-HVDC interconnectors bring exclusive fault characteristics to AC networks, thus influencing the performance of traditional protections. Since fault characteristics are related to the control schemes of interconnectors, a fault ride-through (FRT strategy which is applicable to the interconnector operating characteristic of working in four quadrants and capable of eliminating negative-sequence currents under unbalanced fault conditions is proposed first. Then, the additional terms of measured impedances of distance relays caused by fault resistances are derived using a symmetrical component method. Theoretical analysis shows the output currents of interconnectors are controllable after faults, which may cause malfunctions in distance protections installed on lines emanating from interconnectors under the effect of fault resistances. Pilot protection is also inapplicable to lines emanating from interconnectors. Furthermore, a novel pilot protection principle based on the ratio between phase currents and the ratio between negative-sequence currents flowing through both sides is proposed for lines emanating from the interconnectors whose control scheme aims at eliminating negative-sequence currents. The validity of theoretical analysis and the protection principle is verified by PSCAD/EMTDC simulations.

  18. Determining antioxidant activities of lactobacilli cell-free supernatants by cellular antioxidant assay: a comparison with traditional methods.

    Directory of Open Access Journals (Sweden)

    Jiali Xing

    Full Text Available Antioxidant activity of lactic acid bacteria is associated with multiple health-protective effects. Traditional indexes of chemical antioxidant activities poorly reflect the antioxidant effects of these bacteria in vivo. Cellular antioxidant activity (CAA assay was used in this study to determine the antioxidant activity of cell-free supernatants (CFSs of 10 Lactobacillus strains. The performance of the CAA assay was compared with that of four chemical antioxidant activity assays, namely, DPPH radical scavenging, hydroxyl radical scavenging (HRS, reducing power (RP, and inhibition of linoleic acid peroxidation (ILAP. Results of the CAA assay were associated with those of DPPH and ILAP assays, but not with those of RP and HRS assays. The inter- and intra-specific antioxidant activities of CFS were characterized by chemical and CAA assays. L. rhamnosus CCFM 1107 displayed a high antioxidative effect similar to positive control L. rhamnosus GG ATCC 53103 in all of the assays. The CAA assay is a potential method for the detection of antioxidant activities of lactobacilli CFSs.

  19. Active methodologies in Financial Management classes: an alternative to the traditional teaching method for awakening intrinsic motivation and developing autonomy

    Directory of Open Access Journals (Sweden)

    Guilherme Muniz Pereira Chaves Urias

    2017-01-01

    Full Text Available This article presents a pedagogical experience in Financial Management classes. The objective of this study was to investigate whether the educational activity based on active methodologies, applied in the Financial Management classes in an undergraduate course in Business Administration, can offer formative spaces that enhance the development of the students’ intrinsic motivation to the point of being relevant to the development of their autonomy and thus to be characterized as a viable manner of putting the Freirean pedagogy into practice. In order to do so, the adopted teaching strategy aimed at creating opportunities for interpretating problems that simulated real situations. A questionnaire was applied and the Bardinian content analysis was used to verify the students' impressions about the activity itself and its respective contribution to their professional and personal training. The analysis points to the fact that active methodologies are viable alternatives to the traditional method of teaching regarding the awakening of interest, motivation and the development of learning. It also points to their consonance with the Freirian pedagogy.

  20. [Correlation between physical characteristics of sticks and quality of traditional Chinese medicine pills prepared by plastic molded method].

    Science.gov (United States)

    Wang, Ling; Xian, Jiechen; Hong, Yanlong; Lin, Xiao; Feng, Yi

    2012-05-01

    To quantify the physical characteristics of sticks of traditional Chinese medicine (TCM) honeyed pills prepared by the plastic molded method and the correlation of adhesiveness and plasticity-related parameters of sticks and quality of pills, in order to find major parameters and the appropriate range impacting pill quality. Sticks were detected by texture analyzer for their physical characteristic parameters such as hardness and compression action, and pills were observed by visual evaluation for their quality. The correlation of both data was determined by the stepwise discriminant analysis. Stick physical characteristic parameter l(CD) can exactly depict the adhesiveness, with the discriminant equation of Y0 - Y1 = 6.415 - 41.594l(CD). When Y0 Y1, pills were adhesive with each other. Pills' physical characteristic parameters l(CD) and l(AC), Ar, Tr can exactly depict smoothness of pills, with the discriminant equation of Z0 - Z1 = -195.318 + 78.79l(AC) - 3 258. 982Ar + 3437.935Tr. When Z0 Z1, pills were rough on surface. The stepwise discriminant analysis is made to show the obvious correlation between key physical characteristic parameters l(CD) and l(AC), Ar, Tr of sticks and appearance quality of pills, defining the molding process for preparing pills by the plastic molded and qualifying ranges of key physical characteristic parameters characterizing intermediate sticks, in order to provide theoretical basis for prescription screening and technical parameter adjustment for pills.