WorldWideScience

Sample records for trade inoperability input-output

  1. Interdicting an adversarys economy Viewed as a trade sanction inoperability Input output model

    Science.gov (United States)

    2017-03-01

    Agriculture, hunting, forestry and fishing YES $4,578,424,000 2 TTL_C10T14: Mining and quarrying YES $53,345,194,000 3 TTL_C15T16: Food products, beverages ...inoperability by means of sanctions can limit the production of commodities and cash flow from certain sectors critical to the sustainment of our

  2. Trade in value added in the West Pacific: An input-output analysis

    OpenAIRE

    Nakamura, Yoichi

    2015-01-01

    The evolution of trade between the four regions in the West Pacific in both gross and value added terms is analyzed using international input-output tables. It is found that value added exports of computers and electronic equipment of the Asian economies are very limited in comparison with their gross exports, and that the largest shares of value added exports were accounted for by the services sectors in every region, particularly so in Japan and the US. Surpluses and deficits in bilateral t...

  3. Input-output analysis of CO2 emissions embodied in trade. The effects of spatial aggregation

    International Nuclear Information System (INIS)

    Su, Bin; Ang, B.W.

    2010-01-01

    Energy-related CO 2 emissions embodied in international trade have been widely studied by researchers using the environmental input-output analysis framework. It is well known that both sector aggregation and spatial aggregation affect the results obtained in such studies. With regard to the latter, past studies are often conducted at the national level irrespective of country or economy size. For a large economy with the needed data, studies may be conducted at different levels of spatial aggregation. We examine this problem analytically by extending the work of Su et al. ([Su, B., Huang, H.C., Ang, B.W., Zhou, P., 2010. Input-output analysis of CO 2 emissions embodied in trade: The effects of sector aggregation. Energy Economics 32 (1), 166-175.]) on sector aggregation. We present a numerical example using the data of China and by dividing the country into eight regions. It is found that the results are highly dependent on spatial aggregation. Our study shows that for a large country like China it is meaningful to look into the effect of spatial aggregation. (author)

  4. Uncovering the spatially distant feedback loops of global trade: A network and input-output approach.

    Science.gov (United States)

    Prell, Christina; Sun, Laixiang; Feng, Kuishuang; He, Jiaying; Hubacek, Klaus

    2017-05-15

    Land-use change is increasingly driven by global trade. The term "telecoupling" has been gaining ground as a means to describe how human actions in one part of the world can have spatially distant impacts on land and land-use in another. These interactions can, over time, create both direct and spatially distant feedback loops, in which human activity and land use mutually impact one another over great expanses. In this paper, we develop an analytical framework to clarify spatially distant feedbacks in the case of land use and global trade. We use an innovative mix of multi-regional input-output (MRIO) analysis and stochastic actor-oriented models (SAOMs) for analyzing the co-evolution of changes in trade network patterns with those of land use, as embodied in trade. Our results indicate that the formation of trade ties and changes in embodied land use mutually impact one another, and further, that these changes are linked to disparities in countries' wealth. Through identifying this feedback loop, our results support ongoing discussions about the unequal trade patterns between rich and poor countries that result in uneven distributions of negative environmental impacts. Finally, evidence for this feedback loop is present even when controlling for a number of underlying mechanisms, such as countries' land endowments, their geographical distance from one another, and a number of endogenous network tendencies. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Input-output analysis of CO2 emissions embodied in trade. The effects of sector aggregation

    International Nuclear Information System (INIS)

    Su, Bin; Huang, H.C.; Ang, B.W.; Zhou, P.

    2010-01-01

    Energy-related CO 2 emissions embodied in international trade have been widely studied by researchers using the input-output analysis framework. These studies are often conducted at a specific level of sector aggregation and the choice made to a large extent is dictated by economic and energy data availability. We investigate analytically the possible effects of sector aggregation on the study results. We conduct empirical studies using the data of China and Singapore where energy-related CO 2 emissions embodied in their exports are estimated at different levels of sector aggregation. A finding from the studies is that levels around 40 sectors appear to be sufficient to capture the overall share of emissions embodied in a country's exports. Another finding is that in approximating the 'ideal' situation the hybrid data treatment approach produces better results than the uniformly distributed data treatment approach. Other findings and some recommendations are also presented. (author)

  6. Energy embodied in the international trade of China. An energy input-output analysis

    International Nuclear Information System (INIS)

    Liu, Hongtao; Xi, Youmin; Guo, Ju'e; Li, Xia

    2010-01-01

    Growing international trade has not only positively affected the People's Republic of China's (China's) economic development, but also expanded the exportation of energy embodied in goods during their production. This energy flow out will pose risks to China's rational utilization of natural resources as well as environmental protection. In this paper, we evaluate the energy embodied in goods produced in China during 1992-2005 and use input-output structural decomposition analysis to identify five key factors causing the changes of energy embodied in exports. (Direct primary energy efficiency, primary energy consumption structure, structure of intermediate inputs, structure of exports, and scale of exports.) For the three sub-periods of 1992-1997, 1997-2002, and 2002-2005, results show that China is a net exporter of energy, and the energy embodied in exports tends to increase over time. The expanding total volume of exports and increasing exports of energy-intensive goods tend to enlarge the energy embodied in exports within all three sub-periods, but these driving forces were offset by a considerable improvement of energy efficiency and changes in primary energy consumption structure from 1992 to 2002 and the effects of structure of intermediate input only in the sub-period from 1992 to 1997. From 2002 to 2005, the sharp augmentation of energy embodied in exports was driven by all the five factors. Our research has practical implications for the Chinese economy. Results of this study suggest that the energy embodied in trade should receive special attentions in energy policies design to limit the energy resource out-flow and pollution generation. (author)

  7. Energy and carbon embodied in the international trade of Brazil. An input-output approach

    International Nuclear Information System (INIS)

    Machado, G; Schaeffer, R.; Worrell, E.

    2001-01-01

    All goods and services produced in an economy are directly and/or indirectly associated with energy use and, according to the type of fuel utilized, with CO2 emissions as well. International trade is an important factor in shaping the industrial structure of a country and, consequently, in affecting a country's energy use and CO2 emissions. This study applies input-output techniques to the Brazilian economy to evaluate the total impacts of international trade on its energy use and CO2 emissions. A commodity-by-industry IO model in hybrid units (energy commodities in physical units and non-energy commodities in monetary units) is applied to the Brazilian economy in 1995. Results show that total energy embodied in the exports of non-energy goods of Brazil equals 831 PJ, while total carbon embodied is 13.5 MtC. These amounts are larger than the relevant amounts embodied in the imports of non-energy goods, respectively 679 PJ and 9.9 MtC. These figures are better understood by contrasting them with the total energy use and the corresponding total carbon emissions of the Brazilian economy in 1995 estimated by this work: 6781 PJ and 99.4 MtC, respectively. This means that international inflows and outflows of energy embodied in non-energy goods are in the order of 10 and 12% of the total energy use, while inflows and outflows of carbon embodied in non-energy goods are approximately 10 and 14% of the corresponding total carbon emissions of the Brazilian economy in 1995. The general picture is that Brazil is not only a net exporter of energy (153 PJ) and of carbon (3.6 MtC) embodied in the non-energy goods internationally traded by the country in 1995, but also that each dollar earned with exports embodied 40% more energy and 56% more carbon than each dollar spent on imports. These findings suggest that Brazilian policy-makers should be concerned about the extra impacts international trade policy may have on energy use and carbon emissions of the country. 71 refs

  8. CO2 emissions embodied in China-US trade: Input-output analysis based on the emergy/dollar ratio

    International Nuclear Information System (INIS)

    Du Huibin; Guo Jianghong; Mao Guozhu; Smith, Alexander M.; Wang Xuxu; Wang, Yuan

    2011-01-01

    To gain insight into changes in CO 2 emissions embodied in China-US trade, an input-output analysis based on the emergy/dollar ratio (EDR) is used to estimate embodied CO 2 emissions; a structural decomposition analysis (SDA) is employed to analyze the driving factors for changes in CO 2 emissions embodied in China's exports to the US during 2002-2007. The results of the input-output analysis show that net export of CO 2 emissions increased quickly from 2002 to 2005 but decreased from 2005 to 2007. These trends are due to a reduction in total CO 2 emission intensity, a decrease in the exchange rate, and small imports of embodied CO 2 emissions. The results of the SDA demonstrate that total export volume was the largest driving factor for the increase in embodied CO 2 emissions during 2002-2007, followed by intermediate input structure. Direct CO 2 emissions intensity had a negative effect on changes in embodied CO 2 emissions. The results suggest that China should establish a framework for allocating emission responsibilities, enhance energy efficiency, and improve intermediate input structure. - Highlights: → An input-output analysis based on the emergy/dollar ratio estimated embodied CO 2 . → A structural decomposition analysis analyzed the driving factors. → Net export of CO 2 increased from 2002 to 2005 but decreased from 2005 to 2007. → Total export volume was the largest driving factor. → A framework for allocating emission responsibilities.

  9. Global warming agreements, international trade and energy/carbon embodiments: an input-output approach to the Italian case

    International Nuclear Information System (INIS)

    Mongelli, I.; Tassielli, G.; Notarnicola, B.

    2006-01-01

    In the Kyoto Protocol the absence of Green House Gases (GHGs) commitments of developing countries (non-Annex I) and the more flexible terms of implementation which are allowed to countries shifting toward a market economy (transition economies) naturally lead to the absence or to less constraining national measures and policies of reduction of the GHGs emissions which, in turn, may determine a comparative advantage in the production of the highest energy/carbon intensive commodities for these countries. These arguments are valid also considering the future implementation of the European Emission Allowance Trading Scheme (EATS). Thus, developing countries may become a haven for the production of not environmental-friendly commodities; in this case, the so-called Pollution Haven Hypothesis, stating that due to freer international trade the comparative advantage may change the economic structure and consequently the trade patterns of the countries linked by trade relationships, could occur. This would lead to the increase of the transfers of energy and carbon embodied in traded commodities from developing countries and transition economies toward Kyoto or EATS constrained countries. The aim of this paper is to verify if for Italy, as a Kyoto and EATS complying country, evidence of a change in the trade patterns, occurred on the basis of the Pollution Haven Hypothesis, does exist and to estimate the magnitude of the under-estimation of the carbon actually emitted: the carbon leakage. The Input-Output model has been used to calculate the intensities of energy consumption and the related Green House Gases emission, for each Italian economic sector

  10. Input-output analysis of CO{sub 2} emissions embodied in trade. The effects of sector aggregation

    Energy Technology Data Exchange (ETDEWEB)

    Su, Bin; Huang, H.C. [Department of Industrial and Systems Engineering, National University of Singapore (Singapore); Ang, B.W. [Department of Industrial and Systems Engineering, National University of Singapore (Singapore); Energy Studies Institute, National University of Singapore (Singapore); Zhou, P. [Energy Studies Institute, National University of Singapore (Singapore); College of Economics and Management, Nanjing University of Aeronautics and Astronautics, Nanjing (China)

    2010-01-15

    Energy-related CO{sub 2} emissions embodied in international trade have been widely studied by researchers using the input-output analysis framework. These studies are often conducted at a specific level of sector aggregation and the choice made to a large extent is dictated by economic and energy data availability. We investigate analytically the possible effects of sector aggregation on the study results. We conduct empirical studies using the data of China and Singapore where energy-related CO{sub 2} emissions embodied in their exports are estimated at different levels of sector aggregation. A finding from the studies is that levels around 40 sectors appear to be sufficient to capture the overall share of emissions embodied in a country's exports. Another finding is that in approximating the 'ideal' situation the hybrid data treatment approach produces better results than the uniformly distributed data treatment approach. Other findings and some recommendations are also presented. (author)

  11. Input-output supervisor

    International Nuclear Information System (INIS)

    Dupuy, R.

    1970-01-01

    The input-output supervisor is the program which monitors the flow of informations between core storage and peripheral equipments of a computer. This work is composed of three parts: 1 - Study of a generalized input-output supervisor. With sample modifications it looks like most of input-output supervisors which are running now on computers. 2 - Application of this theory on a magnetic drum. 3 - Hardware requirement for time-sharing. (author) [fr

  12. Greenhouse gases embodied in the international trade and final consumption of Finland: An input-output analysis

    International Nuclear Information System (INIS)

    Maeenpaeae, Ilmo; Siikavirta, Hanne

    2007-01-01

    The estimation of greenhouse gas (GHG) emissions associated with international trade and final consumption gives a more complete and balanced picture of the responsibilities of various countries for the emissions that cause the climate change. The aim of this study was to look at the impact of the coverage of the GHGs and their sources and assumptions regarding the emissions of imports on the results of GHG emissions associated with international trade and final consumption of Finland. In addition to a single year study, a trend covering years 1990-2003 was produced for Finland to study the development of the GHG emissions associated with domestic consumption and the reasons behind the development. According to our results Finland was in 1999 a net exporter of CO 2 from fossil fuel combustion, CO 2 from all sources and GHGs of 4(4.2), 5 or 7 Gkg, respectively. The impact of different assumptions concerning the emissions embodied in imports in the case of Finland was tested by using the domestic emission intensities and the ratios of embodied emissions in imports in relation to domestic products by utilizing the data from the study by (OECD, 2003b. Carbon Dioxide Emissions Embodied in International Trade of Goods, STI Working Paper 2003/15, OECD, Paris). In the case of Finland, the differences of results calculated with these two methods remained rather small. The total emissions embodied in the imports changed from 33.8 to 34.4 Gkg and consequently the net export of CO 2 from fossil fuel combustion changed from 4.2 to 3.6 Gkg. The results for 1990-2003 show that the GHG emissions embodied in the exports have exceeded the GHG emissions embodied in the imports from early 1990s. The reason for the increasingly positive GHG trade balance in the case of Finland has been the change in the magnitude of trade rather than the changes in its structure. The results show also that the impact of international transport on the emission intensity of imports is significant and

  13. Applying the input-output method to account for water footprint and virtual water trade in the Haihe River basin in China.

    Science.gov (United States)

    Zhao, Xu; Yang, Hong; Yang, Zhifeng; Chen, Bin; Qin, Yan

    2010-12-01

    The virtual water strategy which advocates importing water intensive products and exporting products with low water intensity is gradually accepted as one of the options for solving water crisis in severely water scarce regions. However, if we count the virtual water embodied in imported products as the water saved for a region, we might overestimate the saving by including the virtual water that is later re-exported in association with the proceeded products made from the originally imported products. This problem can be avoided by accounting for the saved water through calculating water footprint (WF) in domestic final consumptive products. In this paper, an input-output analysis (IOA) based on the water footprint accounting framework is built to account for WF and virtual water trade of final consumptive products in the water stressed Haihe River basin in China for the year 1997, 2000, and 2002. The input-output transaction tables of the three years are constructed. The results show WF of 46.57, 44.52, and 42.71 billion m(3) for the three years, respectively. These volumes are higher than the water used directly in the corresponding years in the basin. A WF intensity (WFI) indicator is then used to assess if the economic activities in the basin are consistent with the virtual water strategy. The temporal change of the WFI is also decomposed by the index number analysis method. The results showed that the basin was silently importing virtual water through the trade of raw and processed food commodities under the background of the whole economic circulation.

  14. Serial Input Output

    Energy Technology Data Exchange (ETDEWEB)

    Waite, Anthony; /SLAC

    2011-09-07

    Serial Input/Output (SIO) is designed to be a long term storage format of a sophistication somewhere between simple ASCII files and the techniques provided by inter alia Objectivity and Root. The former tend to be low density, information lossy (floating point numbers lose precision) and inflexible. The latter require abstract descriptions of the data with all that that implies in terms of extra complexity. The basic building blocks of SIO are streams, records and blocks. Streams provide the connections between the program and files. The user can define an arbitrary list of streams as required. A given stream must be opened for either reading or writing. SIO does not support read/write streams. If a stream is closed during the execution of a program, it can be reopened in either read or write mode to the same or a different file. Records represent a coherent grouping of data. Records consist of a collection of blocks (see next paragraph). The user can define a variety of records (headers, events, error logs, etc.) and request that any of them be written to any stream. When SIO reads a file, it first decodes the record name and if that record has been defined and unpacking has been requested for it, SIO proceeds to unpack the blocks. Blocks are user provided objects which do the real work of reading/writing the data. The user is responsible for writing the code for these blocks and for identifying these blocks to SIO at run time. To write a collection of blocks, the user must first connect them to a record. The record can then be written to a stream as described above. Note that the same block can be connected to many different records. When SIO reads a record, it scans through the blocks written and calls the corresponding block object (if it has been defined) to decode it. Undefined blocks are skipped. Each of these categories (streams, records and blocks) have some characteristics in common. Every stream, record and block has a name with the condition that each

  15. Multi-Regional Input-Output (MRIO Study of the Provincial Ecological Footprints and Domestic Embodied Footprints Traded among China’s 30 Provinces

    Directory of Open Access Journals (Sweden)

    Decun Wu

    2016-12-01

    Full Text Available Rapid development in China has led to imbalances and inequities of ecological resources among the provinces and regions. In this study, an environmentally extended multi-regional input-output (MRIO model was used to analyze the imbalances, inequities and pressures of the ecological footprints (EF of China’s 30 provinces in 2007. In addition, by decomposing the total product consumption coefficients, we calculated the net embodied EF of the flows among the provinces by the total amount, land type and sector. The results showed that most provinces presented EF deficits. Significant differences were observed between the ecological pressure in consumption (EPC and ecological pressure in production (EPP for each province because of the net embodied EF trade; the EPCs of Shanghai (15.16, Beijing (7.81 and Tianjin (7.81 were the largest and presented descending EPPs, whereas the EPCs of Heilongjiang (0.98, Hebei (0.98, Xinjiang (0.98 and Guangxi (0.98 were under the threshold value (1 and presented ascending EPPs. The carbon footprint in the secondary sector was the main embodied EF of the flows among the provinces responsible for inequities. Finally, based on the various conditions of the provinces in different geographical regions, we have provided suggestions for regionally balanced development that can maintain the EPP and EPC values under the threshold for each province.

  16. Remote input/output station

    CERN Multimedia

    1972-01-01

    A general view of the remote input/output station installed in building 112 (ISR) and used for submitting jobs to the CDC 6500 and 6600. The card reader on the left and the line printer on the right are operated by programmers on a self-service basis.

  17. World Input-Output Network.

    Directory of Open Access Journals (Sweden)

    Federica Cerina

    Full Text Available Production systems, traditionally analyzed as almost independent national systems, are increasingly connected on a global scale. Only recently becoming available, the World Input-Output Database (WIOD is one of the first efforts to construct the global multi-regional input-output (GMRIO tables. By viewing the world input-output system as an interdependent network where the nodes are the individual industries in different economies and the edges are the monetary goods flows between industries, we analyze respectively the global, regional, and local network properties of the so-called world input-output network (WION and document its evolution over time. At global level, we find that the industries are highly but asymmetrically connected, which implies that micro shocks can lead to macro fluctuations. At regional level, we find that the world production is still operated nationally or at most regionally as the communities detected are either individual economies or geographically well defined regions. Finally, at local level, for each industry we compare the network-based measures with the traditional methods of backward linkages. We find that the network-based measures such as PageRank centrality and community coreness measure can give valuable insights into identifying the key industries.

  18. A Country-Specific Water Consumption Inventory Considering International Trade in Asian Countries Using a Multi-Regional Input-Output Table

    Directory of Open Access Journals (Sweden)

    Yuya Ono

    2017-08-01

    Full Text Available Interest in the impacts of water use in the life cycle of products and services are increasing among various stakeholders. The water footprint is a tool to identify critical and effective points for reducing the impact of water use through the entire life cycle of products, services, and organizations. The purpose of this study was to develop a water consumption inventory database that focused on identifying of Asian water consumption using an input-output (IO framework. An Asia International Input-Output table (AIIO was applied in this study. The amount of water consumption required for agricultural products was estimated by modeling; for other sectors it was estimated from statistical reports. The intensities of direct water consumption in each sector were calculated by dividing the amount of water consumption by the domestic production. Based on the IO analysis using Leontief’s inverse matrix, the intensities of water consumption from cradle to gate were estimated for all goods and services. There was high intensity of water consumption in the primary industry sectors, together with a high dependency on rainwater as an input water source. The water consumption intensities generally showed a larger reduction in secondary sectors, in comparison with the tertiary sectors, due to the use of recycled water. There were differences between this study and previous studies due to the use of site-specific production data and the temporal resolution of crop production. By considering site-specific conditions, it is expected that the dataset developed here can be used for estimating the water footprint of products, services, and organizations in nine countries (Japan, South Korea, China, Taiwan, Thailand, the Philippines, Malaysia, Singapore, Indonesia, and USA.

  19. Exact nonradial input, output, and productivity measurement

    OpenAIRE

    Robert G. Chambers

    2002-01-01

    The use of measures originally suggested by Bennet, Bowley, and Hicks in the context of cost of living, welfare, and consumer surplus measurement to measure inputs, outputs, and productivity is examined. Suitably normalized versions of the Bennet-Bowley measures are shown to be exact and superlative measures of input, output, and productivity indicators.

  20. Optimizing microwave photodetection: input-output theory

    Science.gov (United States)

    Schöndorf, M.; Govia, L. C. G.; Vavilov, M. G.; McDermott, R.; Wilhelm, F. K.

    2018-04-01

    High fidelity microwave photon counting is an important tool for various areas from background radiation analysis in astronomy to the implementation of circuit quantum electrodynamic architectures for the realization of a scalable quantum information processor. In this work we describe a microwave photon counter coupled to a semi-infinite transmission line. We employ input-output theory to examine a continuously driven transmission line as well as traveling photon wave packets. Using analytic and numerical methods, we calculate the conditions on the system parameters necessary to optimize measurement and achieve high detection efficiency. With this we can derive a general matching condition depending on the different system rates, under which the measurement process is optimal.

  1. Waste treatment in physical input-output analysis

    NARCIS (Netherlands)

    Dietzenbacher, E

    2005-01-01

    When compared to monetary input-output tables (MIOTs), a distinctive feature of physical input-output tables (PIOTs) is that they include the generation of waste as part of a consistent accounting framework. As a consequence, however, physical input-output analysis thus requires that the treatment

  2. Input-output maps are strongly biased towards simple outputs.

    Science.gov (United States)

    Dingle, Kamaludin; Camargo, Chico Q; Louis, Ard A

    2018-02-22

    Many systems in nature can be described using discrete input-output maps. Without knowing details about a map, there may seem to be no a priori reason to expect that a randomly chosen input would be more likely to generate one output over another. Here, by extending fundamental results from algorithmic information theory, we show instead that for many real-world maps, the a priori probability P(x) that randomly sampled inputs generate a particular output x decays exponentially with the approximate Kolmogorov complexity [Formula: see text] of that output. These input-output maps are biased towards simplicity. We derive an upper bound P(x) ≲ [Formula: see text], which is tight for most inputs. The constants a and b, as well as many properties of  P(x), can be predicted with minimal knowledge of the map. We explore this strong bias towards simple outputs in systems ranging from the folding of RNA secondary structures to systems of coupled ordinary differential equations to a stochastic financial trading model.

  3. Input/output plugin architecture for MDSplus

    Energy Technology Data Exchange (ETDEWEB)

    Stillerman, Joshua, E-mail: jas@psfc.mit.edu [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States); Fredian, Thomas, E-mail: twf@psfc.mit.edu [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States); Manduchi, Gabriele, E-mail: gabriele.manduchi@igi.cnr.it [Consorzio RFX, Euratom-ENEA Association, Corso Stati Uniti 4, Padova 35127 (Italy)

    2014-05-15

    The first version of MDSplus was released in 1991 for VAX/VMS. Since that time the underlying file formats have remained constant. The software however has evolved, it was ported to unix, linux, Windows, and Macintosh. In 1997 a TCP based protocol, mdsip, was added to provide network access to MDSplus data. In 2011 a mechanism was added to allow protocol plugins to permit the use of other transport mechanisms such as ssh to access data users. This paper describes a similar design which permits the insertion of plugins to handle the reading and writing of MDSplus data at the data storage level. Tree paths become URIs which specify the protocol, host, and protocol specific information. The protocol is provided by a dynamically activated shared library that can provide any consistent subset of the data store access API, treeshr. The existing low level network protocol called mdsip, is activated by defining tree paths like “host::/directory”. Using the new plugin mechanism this is re-implemented as an instance of the general plugin that replaces the low level treeshr input/output routines. It is specified by using a path like “mdsip://host/directory”. This architecture will make it possible to adapt the MDSplus data organization and analysis tools to other underlying data storage. The first new application of this, after the existing network protocol is implemented, will be a plugin based on a key value store. Key value stores, can provide inexpensive scalable, redundant data storage. An example of this might be an Amazon G3 plugin which would let you specify a tree path such as “AG3://container” to access MDSplus data stored in the cloud.

  4. Modeling uncertainties in workforce disruptions from influenza pandemics using dynamic input-output analysis.

    Science.gov (United States)

    El Haimar, Amine; Santos, Joost R

    2014-03-01

    Influenza pandemic is a serious disaster that can pose significant disruptions to the workforce and associated economic sectors. This article examines the impact of influenza pandemic on workforce availability within an interdependent set of economic sectors. We introduce a simulation model based on the dynamic input-output model to capture the propagation of pandemic consequences through the National Capital Region (NCR). The analysis conducted in this article is based on the 2009 H1N1 pandemic data. Two metrics were used to assess the impacts of the influenza pandemic on the economic sectors: (i) inoperability, which measures the percentage gap between the as-planned output and the actual output of a sector, and (ii) economic loss, which quantifies the associated monetary value of the degraded output. The inoperability and economic loss metrics generate two different rankings of the critical economic sectors. Results show that most of the critical sectors in terms of inoperability are sectors that are related to hospitals and health-care providers. On the other hand, most of the sectors that are critically ranked in terms of economic loss are sectors with significant total production outputs in the NCR such as federal government agencies. Therefore, policy recommendations relating to potential mitigation and recovery strategies should take into account the balance between the inoperability and economic loss metrics. © 2013 Society for Risk Analysis.

  5. Multiregional Input-Output Analysis of Spatial-Temporal Evolution Driving Force for Carbon Emissions Embodied in Interprovincial Trade and Optimization Policies: Case Study of Northeast Industrial District in China.

    Science.gov (United States)

    Cheng, Hao; Dong, Suocheng; Li, Fujia; Yang, Yang; Li, Shantong; Li, Yu

    2018-01-02

    In the counties with rapid economy and carbon emissions (CEs) growth, CEs embodied in interprovincial trade (CEs-PT) significantly impacts the CEs amount and structure and represents a key issue to consider in CEs reduction policies formulation. This study applied EEBT and two-stage SDA model to analyze the characteristics and driving force of spatial-temporal evolution for net CEs-PT outflow in the Northeast Industrial District of China (NID). We found that, during 1997-2007, the net CEs-PT flowed out from NID to 16 south and east provinces, then to 23 provinces all over China, and its amount has increased 216.798Mt (by 211.67% per year). The main driving forces are technology and demand (further decomposed into structure and scale matrix); the contribution are 71.6418 Mt and 145.1562 Mt. Then, we constructed coupling relationship model and took the top three industries with the greatest net CEs-PT outflow (farming, forestry, animal husbandry and fisheries, electricity and heat production and supply, petroleum processing, coking, and nuclear fuel processing) as examples, adjusted the interprovincial trade constructions, scales, and objects, to reduce the CEs-PT with lower costs, greater effect, and more equitability. The achievement could provide reference for formulating CEs reduction policies for similar areas in the world characterized by rapid growth of economy and CEs.

  6. A didactic Input-Output model for territorial ecology analyses

    OpenAIRE

    Garry Mcdonald

    2010-01-01

    This report describes a didactic input-output modelling framework created jointly be the team at REEDS, Universite de Versailles and Dr Garry McDonald, Director, Market Economics Ltd. There are three key outputs associated with this framework: (i) a suite of didactic input-output models developed in Microsoft Excel, (ii) a technical report (this report) which describes the framework and the suite of models1, and (iii) a two week intensive workshop dedicated to the training of REEDS researcher...

  7. ANALYSIS OF THE BANDUNG CHANGES EXCELLENT POTENTIAL THROUGH INPUT-OUTPUT MODEL USING INDEX LE MASNE

    Directory of Open Access Journals (Sweden)

    Teti Sofia Yanti

    2017-03-01

    Full Text Available Input-Output Table is arranged to present an overview of the interrelationships and interdependence between units of activity (sector production in the whole economy. Therefore the input-output models are complete and comprehensive analytical tool. The usefulness of input-output tables is an analysis of the economic structure of the national/regional level which covers the structure of production and value-added (GDP of each sector. For the purposes of planning and evaluation of the outcomes of development that is comprehensive both national and smaller scale (district/city, a model for regional development planning approach can use the model input-output analysis. Analysis of Bandung Economic Structure did use Le Masne index, by comparing the coefficients of the technology in 2003 and 2008, of which nearly 50% change. The trade sector has grown very conspicuous than other areas, followed by the services of road transport and air transport services, the development priorities and investment Bandung should be directed to these areas, this is due to these areas can be thrust and be power attraction for the growth of other areas. The areas that experienced the highest decrease was Industrial Chemicals and Goods from Chemistry, followed by Oil and Refinery Industry Textile Industry Except For Garment.

  8. Strategic planning with input-output table: a linear programming ...

    African Journals Online (AJOL)

    Strategic planning with input-output table: a linear programming approach. AB Agbadudu, GO Ogunrin, OS Ighomereho. Abstract. No Abstract. Nigeria Journal of Business Administration Vol. 6(1) 2004: 7-16. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  9. An Interface Theory for Input/Output Automata

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

    Building on the theory of interface automata by de~Alfaro and Henzinger we design an interface language for Lynch's Input/Output Automata, a popular formalism used in the development of distributed asynchronous systems, not addressed by previous interface research. We introduce an explicit separa...

  10. Know Your Personal Computer Basic Input-Output System (BIOS)

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 7. Know Your Personal Computer Basic Input-Output System (BIOS). Siddhartha Kumar Ghoshal. Series Article Volume 2 Issue 7 July 1997 pp 48-54. Fulltext. Click here to view fulltext PDF. Permanent link:

  11. Crossover Can Be Constructive When Computing Unique Input Output Sequences

    DEFF Research Database (Denmark)

    Lehre, Per Kristian; Yao, Xin

    2010-01-01

    Unique input output (UIO) sequences have important applications in conformance testing of finite state machines (FSMs). Previous experimental and theoretical research has shown that evolutionary algorithms (EAs) can compute UIOs efficiently on many FSM instance classes, but fail on others. Howeve...

  12. QUALITATIVE DATA AND ERROR MEASUREMENT IN INPUT-OUTPUT-ANALYSIS

    NARCIS (Netherlands)

    NIJKAMP, P; OOSTERHAVEN, J; OUWERSLOOT, H; RIETVELD, P

    1992-01-01

    This paper is a contribution to the rapidly emerging field of qualitative data analysis in economics. Ordinal data techniques and error measurement in input-output analysis are here combined in order to test the reliability of a low level of measurement and precision of data by means of a stochastic

  13. Industrial input-output analysis: implications for industrial ecology.

    Science.gov (United States)

    Duchin, F

    1992-02-01

    Industrial ecology will need to develop fundamentally new approaches to reducing, reusing, and recycling wastes. Industrial ecology will also require an analytic framework for examining the implications for the economic system as a whole of each potential web of industrial changes. A suitable framework is furnished by structural economics, which situates the economy within the physical world. This approach is based on dynamic analysis rather than static concepts of equilibrium, and optimization assumptions are used selectively rather than as the general solution mechanism. Input-output economics, an important formal model within structural economics, can trace the stocks and flows of energy and other materials from extraction through production and consumption to recycling or disposal. An input-output computation, including wastes, is presented; it illustrates the separate but integrated analysis of physical stocks and flows and of prices and costs. This paper also describes the major advances that have been made in the last decade in the extension of input-output economics to address increasingly complex questions, notably the fully dynamic physical/price/income model and the engineering/input-output data base. Economists need to be able to assess the costs of cleaning up and to develop incentive schemes to increase the likelihood this will happen. To do this, economists need to take on the difficult "how" questions that concern industrial ecologists since the cost, and indeed the wider implications, of cleaning up depends upon how it is done. Structural economics, and modern input-output models and data bases, in particular, can help meet this challenge.

  14. Input/Output linearizing control of a nuclear reactor

    International Nuclear Information System (INIS)

    Perez C, V.

    1994-01-01

    The feedback linearization technique is an approach to nonlinear control design. The basic idea is to transform, by means of algebraic methods, the dynamics of a nonlinear control system into a full or partial linear system. As a result of this linearization process, the well known basic linear control techniques can be used to obtain some desired dynamic characteristics. When full linearization is achieved, the method is referred to as input-state linearization, whereas when partial linearization is achieved, the method is referred to as input-output linearization. We will deal with the latter. By means of input-output linearization, the dynamics of a nonlinear system can be decomposed into an external part (input-output), and an internal part (unobservable). Since the external part consists of a linear relationship among the output of the plant and the auxiliary control input mentioned above, it is easy to design such an auxiliary control input so that we get the output to behave in a predetermined way. Since the internal dynamics of the system is known, we can check its dynamics behavior on order of to ensure that the internal states are bounded. The linearization method described here can be applied to systems with one-input/one-output, as well as to systems with multiple-inputs/multiple-outputs. Typical control problems such as stabilization and reference path tracking can be solved using this technique. In this work, the input/output linearization theory is presented, as well as the problem of getting the output variable to track some desired trayectories. Further, the design of an input/output control system applied to the nonlinear model of a research nuclear reactor is included, along with the results obtained by computer simulation. (Author)

  15. Structural Decomposition Analysis of China’s Industrial Energy Consumption Based on Input-Output Analysis

    Science.gov (United States)

    Huang, X. Y.; Zhou, J. Q.; Wang, Z.; Deng, L. C.; Hong, S.

    2017-05-01

    China is now at a stage of accelerated industrialization and urbanization, with energy-intensive industries contributing a large proportion of economic growth. In this study, we examined industrial energy consumption by decomposition analysis to describe the driving factors of energy consumption in China. Based on input-output (I-O) tables from the World Input-Output Database (WIOD) website and China’s energy use data from 1995 to 2011, we studied the sectorial changes of energy efficiency during the examined period. The results showed that all industries increased their energy efficiency. Energy consumption was decomposed into three factors by the logarithmic mean Divisia index (LMDI) method. The increase in production output was the leading factor that drives up China’s energy consumption. World Trade Organization accession and financial crises had great impact on the energy consumption. Based on these results, a series of energy policy suggestions for decision-makers has been proposed.

  16. Advanced information processing system: Input/output network management software

    Science.gov (United States)

    Nagle, Gail; Alger, Linda; Kemp, Alexander

    1988-01-01

    The purpose of this document is to provide the software requirements and specifications for the Input/Output Network Management Services for the Advanced Information Processing System. This introduction and overview section is provided to briefly outline the overall architecture and software requirements of the AIPS system before discussing the details of the design requirements and specifications of the AIPS I/O Network Management software. A brief overview of the AIPS architecture followed by a more detailed description of the network architecture.

  17. Priority economic sector and household income in Indonesia (an analysis of input output)

    Science.gov (United States)

    Subanti, S.; Mulyanto; Hakim, A. R.; Mafruhah, I.; Hakim, I. M.

    2018-03-01

    This purpose of study aims to identify the roles of priority economic sectors on household incomes in Indonesia. Analyse in this paper used nine economic sectors, that representing result of classification from input output table. This study found that (1) priority economic sector are manufacturing sector & trade hotel and restaurant; (2) sector that have looking forward orientation included agriculture, mining & quarrying, and financial ownership & business services; and (3) electricity, gas, and water supply sector give the biggest impact to household income in Indonesia. The suggestion that policies aimed at increasing productivity and raising skills while encouraging individual participation in the formal labour market are essential.

  18. Input-output analysis for installing renewable energy systems

    International Nuclear Information System (INIS)

    Itoh, Y.; Nakata, T.

    2004-01-01

    Renewable energy facilities have been installed in many regions, because of their possibility to be an alternative to fossil fuels for mitigating global warming. Besides the profitability of renewable energy businesses, indirect economic effects of installing renewable energy facilities should be clarified. This study examines the possibility that the renewable energy facilities give renewed impetus to regional economic progress. The economic effects are analysed with input-output techniques in a rural area in Japan. As a consequence, both positive and negative effects on the rural economy are derived. In addition, we will focus on the changes in sectors such as construction, business services, banking, etc. as a result of economic activities for renewable systems. The business benefits of renewable energy system are discussed. (author)

  19. Space market model space industry input-output model

    Science.gov (United States)

    Hodgin, Robert F.; Marchesini, Roberto

    1987-01-01

    The goal of the Space Market Model (SMM) is to develop an information resource for the space industry. The SMM is intended to contain information appropriate for decision making in the space industry. The objectives of the SMM are to: (1) assemble information related to the development of the space business; (2) construct an adequate description of the emerging space market; (3) disseminate the information on the space market to forecasts and planners in government agencies and private corporations; and (4) provide timely analyses and forecasts of critical elements of the space market. An Input-Output model of market activity is proposed which are capable of transforming raw data into useful information for decision makers and policy makers dealing with the space sector.

  20. El análisis input-output

    Directory of Open Access Journals (Sweden)

    de Parada, Javier

    1964-07-01

    Full Text Available Economic development has been the permanent aim of the economic policy of every country. This requires a detailed knowledge of the relationships between the various economic activities, so that available resources can be applied to those activities that will lead to the greatest increase in the total national production, and also to the largest increment in labour vacancies, and exports. This optimum exploitation of available economic resources has been attempted width the introduction of the so called economic development plans. An important instrument in economic planning is the input output analysis. This article gives the basic hypotheses and the theoretical fundamentals underlying this type of analysis. From the latest input output table of Spanish economic activity, a secondary table has been prepared covering the aspects that affect construction most closely, so that the construction industry can also be subjected to this type of analysis. The predetermined variables have been taken to be the state provisions for future subsidies to the housing and road construction industries.Cuando en 1758 el Dr. F. Quesnay, médico de Luis XV, formula su famoso «Tableau Economique», las ideas sobre la interdependencia general de los sectores económicos calaron profundamente en el espíritu de los economistas de la época. La escuela fisiócrata, entonces en boga, consideraba el «dejar obrar» a las leyes naturales como la mejor forma de gobierno. Quesnay intuyó el movimiento natural circulatorio de los bienes económicos, y como fruto de sus investigaciones surgió el celebérrimo «Tableau Economique», que fue aclamado por sus contemporáneos como uno de los más grandes descubrimientos de la Historia.

  1. A Markovian model of evolving world input-output network.

    Directory of Open Access Journals (Sweden)

    Vahid Moosavi

    Full Text Available The initial theoretical connections between Leontief input-output models and Markov chains were established back in 1950s. However, considering the wide variety of mathematical properties of Markov chains, so far there has not been a full investigation of evolving world economic networks with Markov chain formalism. In this work, using the recently available world input-output database, we investigated the evolution of the world economic network from 1995 to 2011 through analysis of a time series of finite Markov chains. We assessed different aspects of this evolving system via different known properties of the Markov chains such as mixing time, Kemeny constant, steady state probabilities and perturbation analysis of the transition matrices. First, we showed how the time series of mixing times and Kemeny constants could be used as an aggregate index of globalization. Next, we focused on the steady state probabilities as a measure of structural power of the economies that are comparable to GDP shares of economies as the traditional index of economies welfare. Further, we introduced two measures of systemic risk, called systemic influence and systemic fragility, where the former is the ratio of number of influenced nodes to the total number of nodes, caused by a shock in the activity of a node, and the latter is based on the number of times a specific economic node is affected by a shock in the activity of any of the other nodes. Finally, focusing on Kemeny constant as a global indicator of monetary flow across the network, we showed that there is a paradoxical effect of a change in activity levels of economic nodes on the overall flow of the world economic network. While the economic slowdown of the majority of nodes with high structural power results to a slower average monetary flow over the network, there are some nodes, where their slowdowns improve the overall quality of the network in terms of connectivity and the average flow of the money.

  2. A Markovian model of evolving world input-output network.

    Science.gov (United States)

    Moosavi, Vahid; Isacchini, Giulio

    2017-01-01

    The initial theoretical connections between Leontief input-output models and Markov chains were established back in 1950s. However, considering the wide variety of mathematical properties of Markov chains, so far there has not been a full investigation of evolving world economic networks with Markov chain formalism. In this work, using the recently available world input-output database, we investigated the evolution of the world economic network from 1995 to 2011 through analysis of a time series of finite Markov chains. We assessed different aspects of this evolving system via different known properties of the Markov chains such as mixing time, Kemeny constant, steady state probabilities and perturbation analysis of the transition matrices. First, we showed how the time series of mixing times and Kemeny constants could be used as an aggregate index of globalization. Next, we focused on the steady state probabilities as a measure of structural power of the economies that are comparable to GDP shares of economies as the traditional index of economies welfare. Further, we introduced two measures of systemic risk, called systemic influence and systemic fragility, where the former is the ratio of number of influenced nodes to the total number of nodes, caused by a shock in the activity of a node, and the latter is based on the number of times a specific economic node is affected by a shock in the activity of any of the other nodes. Finally, focusing on Kemeny constant as a global indicator of monetary flow across the network, we showed that there is a paradoxical effect of a change in activity levels of economic nodes on the overall flow of the world economic network. While the economic slowdown of the majority of nodes with high structural power results to a slower average monetary flow over the network, there are some nodes, where their slowdowns improve the overall quality of the network in terms of connectivity and the average flow of the money.

  3. Field-Programmable Logic Devices with Optical Input Output

    Science.gov (United States)

    Szymanski, Ted H.; Saint-Laurent, Martin; Tyan, Victor; Au, Albert; Supmonchai, Boonchuay

    2000-02-01

    A field-programmable logic device (FPLD) with optical I O is described. FPLD s with optical I O can have their functionality specified in the field by means of downloading a control-bit stream and can be used in a wide range of applications, such as optical signal processing, optical image processing, and optical interconnects. Our device implements six state-of-the-art dynamically programmable logic arrays (PLA s) on a 2 mm 2 mm die. The devices were fabricated through the Lucent Technologies Advanced Research Projects Agency Consortium for Optical and Optoelectronic Technologies in Computing (Lucent ARPA COOP) workshop by use of 0.5- m complementary metal-oxide semiconductor self-electro-optic device technology and were delivered in 1998. All devices are fully functional: The electronic data paths have been verified at 200 MHz, and optical tests are pending. The device has been programmed to implement a two-stage optical switching network with six 4 4 crossbar switches, which can realize more than 190 10 6 unique programmable input output permutations. The same device scaled to a 2 cm 2 cm substrate could support as many as 4000 optical I O and 1 Tbit s of optical I O bandwidth and offer fully programmable digital functionality with approximately 110,000 programmable logic gates. The proposed optoelectronic FPLD is also ideally suited to realizing dense, statically reconfigurable crossbar switches. We describe an attractive application area for such devices: a rearrangeable three-stage optical switch for a wide-area-network backbone, switching 1000 traffic streams at the OC-48 data rate and supporting several terabits of traffic.

  4. Multi-regional input-output analysis for China's regional CH4 emissions

    Science.gov (United States)

    Zhang, Bo; Li, Jiashuo; Peng, Beihua

    2014-03-01

    China is the largest CH4 emitter in the world. Given the importance of CH4 in greenhouse gas emission inventories, the characteristics of China's CH4 emissions at different scales deserve to be fully understood. Presented in this paper is an interprovincial input-output embodiment analysis of China's regional CH4 emissions in 2007, based on the most recently available multi-regional input-output table, and relevant CH4 emissions data. The results show that the eastern, central and western areas contribute to 48.2%, 28.6%, and 23.3% of the national total embodied emissions, respectively. Guangdong has the highest level of embodied CH4 emissions among all of the 30 regions. The Agriculture sector produces the most embodied CH4 emissions in final demand, followed by the Construction, Food Production and Tobacco Processing, and Other Service Activities sectors. Significant net transfers of embodied CH4 emission flows are identified from the central and western areas to the eastern area via interregional trade. Shanxi is the largest interregional exporter of embodied CH4 emissions. In contrast, Guangdong is the largest interregional importer. Energy activities, agricultural activities, and waste management comprise 65.6%, 30.7%, and 3.7% of the total embodied CH4 emissions in interregional trade, respectively. By using consumption-based accounting principles, the emission magnitudes, per capita emissions, and emission intensities of most eastern regions increase remarkably, while those of some central and western regions decrease largely. To achieve regional CH4 emission mitigation, comprehensive mitigation measures should be designed under consideration of regional transfer of emission responsibility.

  5. Prioritizing towards a green export portfolio for India: An environmental input-output approach

    Energy Technology Data Exchange (ETDEWEB)

    Goldar, Amrita, E-mail: agoldar@icrier.res.in [Indian Council for Research on International Economic Relations (ICRIER), Core 6A, 4th Floor, India Habitat Centre, Lodhi Road, New Delhi 110003 (India); Bhanot, Jaya, E-mail: jaya.bhanot@teri.res.in [Energy and Resources Institute (TERI), Darbari Seth Block, India Habitat Centre, Lodhi Road, New Delhi 110003 (India); Shimpo, Kazushige, E-mail: shimpo@fbc.keio.ac.jp [Keio University, 2-15-45 Mita, Minato-Ku, Tokyo 108-8345 (Japan)

    2011-11-15

    Proponents of free trade have often hailed international trade as an engine of economic growth. However, the foreign trade sector, like many other sectors in developing countries, frequently involves these countries walking a tightrope between their developmental objectives and environmental goals. In this regard, prioritizing for developing a 'green' yet internationally competitive export portfolio provides a quintessential win-win solution to the problem. This study factors in both environmental benignity (indicated by total CO{sub 2} emission intensity) as well as trade competitiveness (indicated by revealed comparative advantage index) in identifying the 'ideal' Indian export portfolio. The analysis calculates the level of direct and indirect emissions from the foreign trade sector (exports and imports) using the environmental input-output (EIO) matrix for 2003/04 for India that has been jointly developed by researchers from Keio University, Japan, and The Energy and Resources Institute (TERI), New Delhi. The derived basket is compared to the current portfolio to estimate the potential saving from compositional changes and to suggest directions for policymaking to emphasize or de-emphasize the export of certain categories of exports. - Highlights: > India was a net GHG importer (0.064 Gt CO{sub 2}) in 2003/04. > Emissions from exports and imports were 0.189 and 0.253 Gt CO{sub 2}, respectively. > Prioritizing of exports using IO and RCA shows horticultural exports to be ideal. > Services and gems and jewelry exports were also found suitable. > A composition change in exports leads to reduction in emissions by 30 Mt CO{sub 2} annually.

  6. Prioritizing towards a green export portfolio for India: An environmental input-output approach

    International Nuclear Information System (INIS)

    Goldar, Amrita; Bhanot, Jaya; Shimpo, Kazushige

    2011-01-01

    Proponents of free trade have often hailed international trade as an engine of economic growth. However, the foreign trade sector, like many other sectors in developing countries, frequently involves these countries walking a tightrope between their developmental objectives and environmental goals. In this regard, prioritizing for developing a 'green' yet internationally competitive export portfolio provides a quintessential win-win solution to the problem. This study factors in both environmental benignity (indicated by total CO 2 emission intensity) as well as trade competitiveness (indicated by revealed comparative advantage index) in identifying the 'ideal' Indian export portfolio. The analysis calculates the level of direct and indirect emissions from the foreign trade sector (exports and imports) using the environmental input-output (EIO) matrix for 2003/04 for India that has been jointly developed by researchers from Keio University, Japan, and The Energy and Resources Institute (TERI), New Delhi. The derived basket is compared to the current portfolio to estimate the potential saving from compositional changes and to suggest directions for policymaking to emphasize or de-emphasize the export of certain categories of exports. - Highlights: → India was a net GHG importer (0.064 Gt CO 2 ) in 2003/04. → Emissions from exports and imports were 0.189 and 0.253 Gt CO 2 , respectively. → Prioritizing of exports using IO and RCA shows horticultural exports to be ideal. → Services and gems and jewelry exports were also found suitable. → A composition change in exports leads to reduction in emissions by 30 Mt CO 2 annually.

  7. INTEGRATION OF INPUT - OUTPUT APPROACH INTO AGENT-BASED MODELING. PART 2. INTERREGIONAL ANALYSIS IN AN ARTIFICIAL ECONOMY

    Directory of Open Access Journals (Sweden)

    Domozhirov D. A.

    2017-06-01

    Full Text Available The article demonstrates the possibilities of spatial analysis provided by the Agent-Based Multiregional Input - Output Model (ABMIOM of the Russian economy. The basic hypothesis of the ABMIOM is that agents’ decisions at the microeconomic level lead to spatial changes at the macro level. Confirmation of this hypothesis requires experimental calculations with changes in various parameters that influence agents’ decisions (such as prices, taxes, tariffs, etc.. Analyzing the results of these calculations requires moving from microeconomic data to the macro level. The paper proposes a method for the structural analysis of the model simulation results using input-output tables. The method involves statistical aggregation of calculation results, construction of regional, national and interregional input-output tables and structural analysis of the obtained tables including calculation of regional Leontief multipliers. The method proposed is used to study the influence of the level of transport costs on the geographical structure of trade flows. The results of the experiments confirmed that with the increase of transportation costs economic agents prefer to interact with nearest agents, which leads to a decreased interregional commodity exchange and to economic «insulation» of the regions.

  8. Towards a global multi-regional environmentally extended input-output database

    NARCIS (Netherlands)

    Tukker, Arnold; Poliakov, Evgueni; Heijungs, Reinout; Hawkins, Troy; Neuwahl, Frederik; Rueda-Cantuche, Jose M.; Giljum, Stefan; Moll, Stephan; Oosterhaven, Jan; Bouwmeester, Maaike

    2009-01-01

    This paper presents the strategy for a large EU-funded Integrated Project: EXIOPOL ("A New Environmental Accounting Framework Using Externality Data and Input-Output Tools for Policy Analysis"), with special attention for its part in environmentally extended (EE) input-output (IO) analysis. The

  9. THE CONSTRUCTION OF WORLD INPUT-OUTPUT TABLES IN THE WIOD PROJECT

    NARCIS (Netherlands)

    Dietzenbacher, Erik; Los, Bart; Stehrer, Robert; Timmer, Marcel; de Vries, Gaaitzen

    2013-01-01

    This article describes the construction of the World InputOutput Tables (WIOTs) that constitute the core of the World InputOutput Database. WIOTs are available for the period 19952009 and give the values of transactions among 35 industries in 40 countries plus the Rest of the World' and from these

  10. Change in CO2 emission and its transmissions between Korea and Japan using international input-output analysis

    International Nuclear Information System (INIS)

    Rhee, Hae-Chun; Chung, Hyun-Sik

    2006-01-01

    This paper is intended to analyze CO 2 transmission between Japan and South Korea through international trade based on 1990 and 1995 international input-output data. It applied a residual-free structural decomposition method proposed by Chung and Rhee [Chung, H.S., Rhee, H.C., 2001. A residual-free decomposition of the sources of carbon dioxide emissions: a case of the Korean industries. Energy 26 (1), 15-30] to emission-related international input-output analysis for the first time in the decomposition studies. This paper is a case study regarding the manner and the extent to which CO 2 emissions are influenced by international trade between Japan (an Annex I country) and South Korea (a non-Annex I country), which is of particular interest for the carbon leakage issue. In this paper, we attempted to show which factors contributed to the changes in emission of the major greenhouse gas in South Korea and Japan. The changes in emission are analyzed in terms of emission intensity, input techniques, demand composition, and trade structures. According to our analysis, South Korea, a non-Annex I country, has more energy-intensive production structures than Japan, an Annex I country. South Korea's trade pattern with Japan reflects these production features, resulting in the Korea's comparative advantage in emission intensive products, though the degree has somewhat mitigated in 1995 compared to 1990. (author)

  11. Water resources and environmental input-output analysis and its key study issues: a review

    Science.gov (United States)

    YANG, Z.; Xu, X.

    2013-12-01

    Used to study the material and energy flow in socioeconomic system, Input-Output Analysis(IOA) had been an effective analysis tool since its appearance. The research fields of Input-Output Analysis were increasingly expanded and studied in depth with the development of fundamental theory. In this paper, starting with introduction of theory development, the water resources input-output analysis and environmental input-output analysis had been specifically reviewed, and two key study issues mentioned as well. Input-Occupancy-Output Analysis and Grey Input-Output Analysis whose proposal and development were introduced firstly could be regard as the effective complements of traditional IOA theory. Because of the hypotheses of homogeneity, stability and proportionality, Input-Occupancy-Output Analysis and Grey Input-Output Analysis always had been restricted in practical application inevitably. In the applied study aspect, with investigation of abundant literatures, research of water resources input-output analysis and environmental input-output analysis had been comprehensively reviewed and analyzed. The regional water resources flow between different economic sectors had been systematically analyzed and stated, and several types of environmental input-output analysis models combined with other effective analysis tools concluded. In two perspectives in terms of external and inland aspect, the development of water resources and environmental input-output analysis model had been explained, and several typical study cases in recent years listed respectively. By the aid of sufficient literature analysis, the internal development tendency and study hotspot had also been summarized. In recent years, Chinese literatures reporting water resources consumption analysis and virtue water study had occupied a large share. Water resources consumption analysis had always been the emphasis of inland water resources IOA. Virtue water study had been considered as the new hotspot of

  12. CO2 emissions vs. CO2 responsibility: An input-output approach for the Turkish economy

    International Nuclear Information System (INIS)

    Ipek Tunc, G.; Tueruet-Asik, Serap; Akbostanci, Elif

    2007-01-01

    Recently, global warming (greenhouse effect) and its effects have become one of the hottest topics in the world agenda. There have been several international attempts to reduce the negative effects of global warming. The Kyoto Protocol can be cited as the most important agreement which tries to limit the countries' emissions within a time horizon. For this reason, it becomes important to calculate the greenhouse gas emissions of countries. The aim of this study is to estimate the amount of CO 2 -the most important greenhouse gas-emissions, for the Turkish economy. An extended input-output model is estimated by using 1996 data in order to identify the sources of CO 2 emissions and to discuss the share of sectors in total emission. Besides, 'CO 2 responsibility', which takes into account the CO 2 content of imports, is estimated for the Turkish economy. The sectoral CO 2 emissions and CO 2 responsibilities are compared and these two notions are linked to foreign trade volume. One of the main conclusions is that the manufacturing industry has the first place in both of the rankings for CO 2 emissions and CO 2 responsibilities, while agriculture and husbandry has the last place

  13. Greenhouse gas emissions in China 2007: Inventory and input-output analysis

    International Nuclear Information System (INIS)

    Chen, G.Q.; Zhang Bo

    2010-01-01

    For greenhouse gas (GHG) emissions by the Chinese economy in 2007 with the most recent statistics availability, a concrete inventory covering CO 2 , CH 4 , and N 2 O is composed and associated with an input-output analysis to reveal the emission embodiment in final consumption and international trade. The estimated total direct GHG emission amounts to 7456.12 Mt CO 2 -eq by the commonly referred IPCC global warming potentials, with 63.39% from energy-related CO 2 , 22.31% from non-energy-related CO 2 , 11.15% from CH 4 and 3.15% from N 2 O. Responsible for 81.32% of the total GHG emissions are the five sectors of the Electric Power/Steam and Hot Water Production and Supply, Smelting and Pressing of Ferrous and Nonferrous Metals, Nonmetal Mineral Products, Agriculture, and Coal Mining and Dressing, with distinctive emission structures. The sector of Construction holds the top GHG emissions embodied in both domestic production and consumption, and the emission embodied in gross capital formation is prominently more than those in other components of the final consumption characterized by extensive investment in contrast to limited household consumption. China is a net exporter of embodied GHG emissions, with emissions embodied in exports of 3060.18 Mt CO 2 -eq, in magnitude up to 41.04% of the total direct emission.

  14. Energy-dominated local carbon emissions in Beijing 2007: inventory and input-output analysis.

    Science.gov (United States)

    Guo, Shan; Liu, J B; Shao, Ling; Li, J S; An, Y R

    2012-01-01

    For greenhouse gas (GHG) emissions by Beijing economy 2007, a concrete emission inventory covering carbon dioxide (CO(2)), methane (CH(4)), and nitrous oxide (N(2)O) is presented and associated with an input-output analysis to reveal the local GHG embodiment in final demand and trade without regard to imported emissions. The total direct GHG emissions amount to 1.06E + 08 t CO(2)-eq, of which energy-related CO(2) emissions comprise 90.49%, non-energy-related CO(2) emissions 6.35%, CH(4) emissions 2.33%, and N(2)O emissions 0.83%, respectively. In terms of energy-related CO(2) emissions, the largest source is coal with a percentage of 53.08%, followed by coke with 10.75% and kerosene with 8.44%. Sector 26 (Construction Industry) holds the top local emissions embodied in final demand of 1.86E + 07 t CO(2)-eq due to its considerable capital, followed by energy-intensive Sectors 27 (Transport and Storage) and 14 (Smelting and Pressing of Ferrous and Nonferrous Metals). The GHG emissions embodied in Beijing's exports are 4.90E + 07 t CO(2)-eq, accounting for 46.01% of the total emissions embodied in final demand. The sound scientific database totally based on local emissions is an important basis to make effective environment and energy policies for local decision makers.

  15. Energy-Dominated Local Carbon Emissions in Beijing 2007: Inventory and Input-Output Analysis

    Science.gov (United States)

    Guo, Shan; Liu, J. B.; Shao, Ling; Li, J. S.; An, Y. R.

    2012-01-01

    For greenhouse gas (GHG) emissions by Beijing economy 2007, a concrete emission inventory covering carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) is presented and associated with an input-output analysis to reveal the local GHG embodiment in final demand and trade without regard to imported emissions. The total direct GHG emissions amount to 1.06E + 08 t CO2-eq, of which energy-related CO2 emissions comprise 90.49%, non-energy-related CO2 emissions 6.35%, CH4 emissions 2.33%, and N2O emissions 0.83%, respectively. In terms of energy-related CO2 emissions, the largest source is coal with a percentage of 53.08%, followed by coke with 10.75% and kerosene with 8.44%. Sector 26 (Construction Industry) holds the top local emissions embodied in final demand of 1.86E + 07 t CO2-eq due to its considerable capital, followed by energy-intensive Sectors 27 (Transport and Storage) and 14 (Smelting and Pressing of Ferrous and Nonferrous Metals). The GHG emissions embodied in Beijing's exports are 4.90E + 07 t CO2-eq, accounting for 46.01% of the total emissions embodied in final demand. The sound scientific database totally based on local emissions is an important basis to make effective environment and energy policies for local decision makers. PMID:23193385

  16. China’s Carbon Footprint Based on Input-Output Table Series: 1992–2020

    Directory of Open Access Journals (Sweden)

    Haitao Zheng

    2017-03-01

    Full Text Available Reducing carbon emissions is a major concern for China’s future. This paper explores the embodied carbon footprint of Chinese final demand from the point of view of industries. It uses the Matrix Transformation Technique (MTT to update the input-output table series from 1992 to 2020 in China. Then, we measure the embodied carbon emissions for the period 1992–2020 from 29 industry producers to the final demand, covering urban and rural residential consumption, government consumption, fixed capital formation, and net exports. The results show that construction, other services, wholesale, retail trade, accommodation and catering, industrial machinery and equipment, transport, storage and postal services, and manufacture of foods and tobacco are the industries with the greatest carbon emissions from producers, while fixed capital formation and urban consumption are the largest emitters from the perspective of final demand. The embodied carbon emission multipliers for most of the industries are decreasing, while the total carbon emissions are increasing each year. The ratio of emissions from residential consumption in terms of total emissions is decreasing. Each industry has a different main final demand-driven influencing factor on emission and, for each type of final demand, there are different industries with higher emissions.

  17. Energy-Dominated Local Carbon Emissions in Beijing 2007: Inventory and Input-Output Analysis

    Directory of Open Access Journals (Sweden)

    Shan Guo

    2012-01-01

    Full Text Available For greenhouse gas (GHG emissions by Beijing economy 2007, a concrete emission inventory covering carbon dioxide (CO2, methane (CH4, and nitrous oxide (N2O is presented and associated with an input-output analysis to reveal the local GHG embodiment in final demand and trade without regard to imported emissions. The total direct GHG emissions amount to 1.06E + 08 t CO2-eq, of which energy-related CO2 emissions comprise 90.49%, non-energy-related CO2 emissions 6.35%, CH4 emissions 2.33%, and N2O emissions 0.83%, respectively. In terms of energy-related CO2 emissions, the largest source is coal with a percentage of 53.08%, followed by coke with 10.75% and kerosene with 8.44%. Sector 26 (Construction Industry holds the top local emissions embodied in final demand of 1.86E + 07 t CO2-eq due to its considerable capital, followed by energy-intensive Sectors 27 (Transport and Storage and 14 (Smelting and Pressing of Ferrous and Nonferrous Metals. The GHG emissions embodied in Beijing's exports are 4.90E + 07 t CO2-eq, accounting for 46.01% of the total emissions embodied in final demand. The sound scientific database totally based on local emissions is an important basis to make effective environment and energy policies for local decision makers.

  18. The economic impacts of Lake States forestry: an input-output study.

    Science.gov (United States)

    Larry Pedersen; Daniel E. Chappelle; David C. Lothner

    1989-01-01

    The report describes 1985 and 1995 levels of forest-related economic activity in the three-state area of Michigan, Minnesota, and Wisconsin, and their impacts on other economic sectors based on a regional input-output model.

  19. Demand-driven water withdrawals by Chinese industry: a multi-regional input-output analysis

    Science.gov (United States)

    Zhang, Bo; Chen, Z. M.; Zeng, L.; Qiao, H.; Chen, B.

    2016-03-01

    With ever increasing water demands and the continuous intensification of water scarcity arising from China's industrialization, the country is struggling to harmonize its industrial development and water supply. This paper presents a systems analysis of water withdrawals by Chinese industry and investigates demand-driven industrial water uses embodied in final demand and interregional trade based on a multi-regional input-output model. In 2007, the Electric Power, Steam, and Hot Water Production and Supply sector ranks first in direct industrial water withdrawal (DWW), and Construction has the largest embodied industrial water use (EWU). Investment, consumption, and exports contribute to 34.6%, 33.3%, and 30.6% of the national total EWU, respectively. Specifically, 58.0%, 51.1%, 48.6%, 43.3%, and 37.5% of the regional EWUs respectively in Guangdong, Shanghai, Zhejiang, Jiangsu, and Fujian are attributed to international exports. The total interregional import/export of embodied water is equivalent to about 40% of the national total DWW, of which 55.5% is associated with the DWWs of Electric Power, Steam, and Hot Water Production and Supply. Jiangsu is the biggest interregional exporter and deficit receiver of embodied water, in contrast to Guangdong as the biggest interregional importer and surplus receiver. Without implementing effective water-saving measures and adjusting industrial structures, the regional imbalance between water availability and water demand tends to intensify considering the water impact of domestic trade of industrial products. Steps taken to improve water use efficiency in production, and to enhance embodied water saving in consumption are both of great significance for supporting China's water policies.

  20. Embodied water analysis for Hebei Province, China by input-output modelling

    Science.gov (United States)

    Liu, Siyuan; Han, Mengyao; Wu, Xudong; Wu, Xiaofang; Li, Zhi; Xia, Xiaohua; Ji, Xi

    2018-03-01

    With the accelerating coordinated development of the Beijing-Tianjin-Hebei region, regional economic integration is recognized as a national strategy. As water scarcity places Hebei Province in a dilemma, it is of critical importance for Hebei Province to balance water resources as well as make full use of its unique advantages in the transition to sustainable development. To our knowledge, related embodied water accounting analysis has been conducted for Beijing and Tianjin, while similar works with the focus on Hebei are not found. In this paper, using the most complete and recent statistics available for Hebei Province, the embodied water use in Hebei Province is analyzed in detail. Based on input-output analysis, it presents a complete set of systems accounting framework for water resources. In addition, a database of embodied water intensity is proposed which is applicable to both intermediate inputs and final demand. The result suggests that the total amount of embodied water in final demand is 10.62 billion m3, of which the water embodied in urban household consumption accounts for more than half. As a net embodied water importer, the water embodied in the commodity trade in Hebei Province is 17.20 billion m3. The outcome of this work implies that it is particularly urgent to adjust industrial structure and trade policies for water conservation, to upgrade technology and to improve water utilization. As a result, to relieve water shortages in Hebei Province, it is of crucial importance to regulate the balance of water use within the province, thus balancing water distribution in the various industrial sectors.

  1. Nonlinear control via approximate input-output linearization - The ball and beam example

    Science.gov (United States)

    Hauser, John; Sastry, Shankar; Kokotovic, Petar

    1992-01-01

    A study is made of approximate input-output linearization of nonlinear systems which fail to have a well defined relative degree. For such systems, a method is provided for constructing approximate systems that are input-output linearizable. The analysis presented in this note is motivated through its application to a common undergraduate control laboratory experiment, the ball and beam system, where it is shown to be more effective for trajectory tracking than the standard Jacobian linearization.

  2. ON MODELING METHODS OF REPRODUCTION OF FIXED ASSETS IN DYNAMIC INPUT - OUTPUT MODELS

    Directory of Open Access Journals (Sweden)

    Baranov A. O.

    2014-12-01

    Full Text Available The article presents a comparative study of methods for modeling reproduction of fixed assets in various types of dynamic input-output models, which have been developed at the Novosibirsk State University and at the Institute of Economics and Industrial Engineering of the Siberian Division of Russian Academy of Sciences. The study compares the technique of information providing for the investment blocks of the models. Considered in detail mathematical description of the block of fixed assets reproduction in the Dynamic Input - Output Model included in the KAMIN system and the optimization interregional input - output model. Analyzes the peculiarities of information support of investment and fixed assets blocks of the Dynamic Input - Output Model included in the KAMIN system and the optimization interregional input - output model. In conclusion of the article provides suggestions for joint use of the analyzed models for Russian economy development forecasting. Provided the use of the KAMIN system’s models for short-term and middle-term forecasting and the optimization interregional input - output model to develop long-term forecasts based on the spatial structure of the economy.

  3. Structural change of the physical economy. Decomposition analysis of physical and hybrid-unit input-output tables

    International Nuclear Information System (INIS)

    Hoekstra, R.

    2003-01-01

    Economic processes generate a variety of material flows, which cause resource problems through the depletion of natural resources and environmental issues due to the emission of pollutants. This thesis presents an analytical method to study the relationship between the monetary economy and the 'physical economy'. In particular, this method can assess the impact of structural change in the economy on physical throughput. The starting point for the approach is the development of an elaborate version of the physical input-output table (PIOT), which acts as an economic-environmental accounting framework for the physical economy. In the empirical application, hybrid-unit input-output (I/O) tables, which combine physical and monetary information, are constructed for iron and steel, and plastic products for the Netherlands for the years 1990 and 1997. The impact of structural change on material flows is analyzed using Structural Decomposition Analysis (SDA), whic specifies effects such as sectoral shifts, technological change, and alterations in consumer spending and international trade patterns. The study thoroughly reviews the application of SDA to environmental issues, compares the method with other decomposition methods, and develops new mathematical specifications. An SDA is performed using the hybrid-unit input-output tables for the Netherlands. The results are subsequently used in novel forecasting and backcasting scenario analyses for the period 1997-2030. The results show that dematerialization of iron and steel, and plastics, has generally not occurred in the recent past (1990-1997), and will not occur, under a wide variety of scenario assumptions, in the future (1997-2030)

  4. Structural change of the physical economy. Decomposition analysis of physical and hybrid-unit input-output tables

    Energy Technology Data Exchange (ETDEWEB)

    Hoekstra, R.

    2003-10-01

    Economic processes generate a variety of material flows, which cause resource problems through the depletion of natural resources and environmental issues due to the emission of pollutants. This thesis presents an analytical method to study the relationship between the monetary economy and the 'physical economy'. In particular, this method can assess the impact of structural change in the economy on physical throughput. The starting point for the approach is the development of an elaborate version of the physical input-output table (PIOT), which acts as an economic-environmental accounting framework for the physical economy. In the empirical application, hybrid-unit input-output (I/O) tables, which combine physical and monetary information, are constructed for iron and steel, and plastic products for the Netherlands for the years 1990 and 1997. The impact of structural change on material flows is analyzed using Structural Decomposition Analysis (SDA), whic specifies effects such as sectoral shifts, technological change, and alterations in consumer spending and international trade patterns. The study thoroughly reviews the application of SDA to environmental issues, compares the method with other decomposition methods, and develops new mathematical specifications. An SDA is performed using the hybrid-unit input-output tables for the Netherlands. The results are subsequently used in novel forecasting and backcasting scenario analyses for the period 1997-2030. The results show that dematerialization of iron and steel, and plastics, has generally not occurred in the recent past (1990-1997), and will not occur, under a wide variety of scenario assumptions, in the future (1997-2030)

  5. El sector del transporte en Castilla y León. Un análisis input output interregional = The transportation sector in Castilla y León. An inter-regional input-output analysis

    Directory of Open Access Journals (Sweden)

    Ana Pardo Fanjul

    2014-07-01

    Full Text Available Resumen El análisis estructural en un contexto Input Output, y en cualquier modelo que relaciona variables endógenas con exógenas, sirve como paso previo para simular y predecir alternativas en el tiempo o en el espacio. La utilización de una Tabla Interregional, configurada con diversas matrices de coeficientes intrarregionales e interregionales que recogen los flujos de comercio entre regiones y sectores, hace que sea posible abordar el análisis espacial de estas interrelaciones. El objetivo de éste trabajo es simular los efectos en las distintas regiones españolas, de variaciones exógenas en la demanda final del sector de transporte en Castilla y León. Abstract In an Input Output context, and in any model relating endogenous and exogenous variables, structural analysis serves as a preliminary step to simulate and predict alternatives in time or space. By using an Interregional Table, which is composed by various matrices of coefficients intrarregional and interregional collecting trade flows between regions and sectors, it is possible to deal with the spatial analysis of these interrelationships. This work aims to simulate the effects of an exogenous variation in Castilla y León transport sector final demand on other Spanish regions

  6. The UK waste input-output table: Linking waste generation to the UK economy.

    Science.gov (United States)

    Salemdeeb, Ramy; Al-Tabbaa, Abir; Reynolds, Christian

    2016-10-01

    In order to achieve a circular economy, there must be a greater understanding of the links between economic activity and waste generation. This study introduces the first version of the UK waste input-output table that could be used to quantify both direct and indirect waste arisings across the supply chain. The proposed waste input-output table features 21 industrial sectors and 34 waste types and is for the 2010 time-period. Using the waste input-output table, the study results quantitatively confirm that sectors with a long supply chain (i.e. manufacturing and services sectors) have higher indirect waste generation rates compared with industrial primary sectors (e.g. mining and quarrying) and sectors with a shorter supply chain (e.g. construction). Results also reveal that the construction, mining and quarrying sectors have the highest waste generation rates, 742 and 694 tonne per £1m of final demand, respectively. Owing to the aggregated format of the first version of the waste input-output, the model does not address the relationship between waste generation and recycling activities. Therefore, an updated version of the waste input-output table is expected be developed considering this issue. Consequently, the expanded model would lead to a better understanding of waste and resource flows in the supply chain. © The Author(s) 2016.

  7. An input-output table based analysis on the virtual water by sectors with the five northwest provinces in China

    Science.gov (United States)

    Shi, Chenchen; Zhan, Jinyan

    Virtual water refers to the volumes of water required to produce a commodity or service. It reflects human's actual consumption of water resources and therefore has certain significance in water resources management. Over the years, the concept of virtual water has caught the attentions of water manager and decision maker. In order to utilize this concept, the accounting and estimation of virtual water is the foundation that lies in this issue. Till now, the accounting methods mainly include the method provided by Food and Agriculture Organization of the United Nations (FAO), water footprint and input-output analysis method. In this paper, we chose Northwest China, which is a typical arid region that is facing with rapid economic development, as the study area and built an Input-Output (IO) analysis method to estimate virtual water among different industry sectors in the northwest China. The accounting and estimation results could be used to give suggestions to increase water use efficiency and promote virtual water trade in the study area. Comparison of the proposed method with other prevailing method was also analyzed. The introduced method could be utilized for accounting and estimation of virtual water by sectors, with its superiority in characterizing industrial water consumption and the accounting results could lend certain credence to the water resource management and industrial transformation for the future economic development of northwest China.

  8. Input-output tables and analyses 2000. Imports, employment and environment

    International Nuclear Information System (INIS)

    2002-05-01

    The publication is primarily designed as a practical reference quide presenting data and in particular analytical results (impact multipliers) on the structural characteristics and developments of the Danish economy. Also readers who are not familiar with the theoretical aspects of input-output analysis may benefit from the contents. In the different chapters of the publication a comprehensive treatment of the basic data material is given together with figures primarily for the year 1998, which is the most recent year for which final national accounts and input-output tables are available. This part is followed by the multipliers, some of which have also been 'forecasted' to the year 2000. The publication presents data for each industrial sector and the household sector in Denmark. It presents data for input-output analyses, environmental accounts, production, employment, energy consumption, and emission of pollutants. (LN)

  9. Impact of magnetic saturation on the input-output linearising tracking control of an induction motor

    DEFF Research Database (Denmark)

    Dolinar, Drago; Ljusev, Petar; Stumberger, Gorazd

    2004-01-01

    This paper deals with the tracking control design of an induction motor, based on input-output linearization with magnetic saturation included. Magnetic saturation is represented by the nonlinear magnetizing curve of the iron core and is used in the control design, the observer of state variables......, and in the load torque estimator. An input-output linearising control is used to achieve better tracking performances of the drive. It is based on the mixed ”stator current - rotor flux linkage” induction motor model with magnetic saturation considered in the stationary reference frame. Experimental results show...... that the proposed input-output linearising tracking control with the included saturation behaves considerably better than the one without saturation, and that it introduces smaller position and speed errors, and better motor stiffness on account of the increased computational complexity....

  10. Climatic change, technological, financial and commercial flows : new directions in input-output analysis

    International Nuclear Information System (INIS)

    Cloutier, L.M.; DeBresson, C.; Dietzenbacher, E.

    2004-01-01

    This book presents the recent work of prominent economists who used the latest input-output analysis techniques to examine complex and interdependent problems such as global warming, climate change and greenhouse gas reduction. It proposes solutions to Solow's Paradox regarding information and communication technologies and examines the role of technological and financial flows. It also proposes theoretical applications for use in Quebec and Canada. The work of young economists who participated at the Leontief International Input-Output Association was also presented. The book is mainly intended for analysts of economic policies and for young researchers looking for advanced input-output analysis techniques. It offers a useful, realistic and systematic analysis of various issues facing contemporary companies. refs., tabs., figs

  11. MACROECONOMIC IMPACT OF EXPENDITURES ON HIGHER EDUCATION: REGIONAL INPUT-OUTPUT ANALYSIS

    Directory of Open Access Journals (Sweden)

    Kristyna Vltavska

    2017-12-01

    Full Text Available This paper deals with the regional input-output analysis and its application to evaluation of the macro-economic impact of expenditures on higher education. Regional input-output tables represent newly developed tool which can be used for the assessment of the regional economic impact of the particular industry and its institutions. The regional input-output tables were experimentally constructed by the Department of Economic Statistics at the University of Economics for all 14 Czech regions. Employing them, we can demonstrate the impact of expenditures on higher education on the macro-economic indicators and employment. This paper deals with 1 billion Czech crowns expenditures on higher education sent by the Ministry to the hypothetical higher education institution. Finally, the impact of higher education expenditures is compared with the impact of expenditures to another industries (ICT, R&D and tourism.

  12. Forecasting the Romanian sectoral economy using the input-output method

    Directory of Open Access Journals (Sweden)

    Liliana DUGULEANĂ

    2017-07-01

    Full Text Available The purpose of this paper is to forecast the sectoral output in 2013 based on the input-output structure of Romanian economy in 2010. Considering that the economic linkage mechanisms do not easily change during certain time periods, the forecasting is possible, even if not in the sequence of the time passing. Using the technical matrix of the sectoral structure described for year 2010 and some known indicators of the economic sectors, as the value added for each sector in 2013, the sectoral output is projected for 2013. The Romanian GDP in 2013 is estimated based on the input-output model. From a managerial perspective, this study is useful to forecast the sectoral output and to understand the sectoral behaviour, based on the input-output analysis of the value added, the compensation for employees and the final demand, which were considered here.

  13. Input-output model for MACCS nuclear accident impacts estimation¹

    Energy Technology Data Exchange (ETDEWEB)

    Outkin, Alexander V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bixler, Nathan E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vargas, Vanessa N [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-01-27

    Since the original economic model for MACCS was developed, better quality economic data (as well as the tools to gather and process it) and better computational capabilities have become available. The update of the economic impacts component of the MACCS legacy model will provide improved estimates of business disruptions through the use of Input-Output based economic impact estimation. This paper presents an updated MACCS model, bases on Input-Output methodology, in which economic impacts are calculated using the Regional Economic Accounting analysis tool (REAcct) created at Sandia National Laboratories. This new GDP-based model allows quick and consistent estimation of gross domestic product (GDP) losses due to nuclear power plant accidents. This paper outlines the steps taken to combine the REAcct Input-Output-based model with the MACCS code, describes the GDP loss calculation, and discusses the parameters and modeling assumptions necessary for the estimation of long-term effects of nuclear power plant accidents.

  14. Input-output linearizing tracking control of induction machine with the included magnetic saturation

    DEFF Research Database (Denmark)

    Dolinar, Drago; Ljusev, Petar; Stumberger, Gorazd

    2003-01-01

    The tracking control design of an induction motor, based on input-output linearisation with magnetic saturation included is addressed. The magnetic saturation is represented by a nonlinear magnetising curve for the iron core and is used in the control, the observer of the state variables, and in ...

  15. Energy Shaping of Port-Hamiltonian Systems by Using Alternate Passive Input-Output Pairs

    NARCIS (Netherlands)

    Venkatraman, A.; Schaft, A. van der

    2010-01-01

    We consider port-Hamiltonian systems with dissipation (PHSD) whose underlying geometric structure is represented as the composition of a Dirac and a resistive structure. We show how the choice of a new passive input-output pair for a PHSD is reflected in a new Dirac structure. We define a general

  16. Input-Output model for waste management plan for Nigeria | Njoku ...

    African Journals Online (AJOL)

    An Input-Output Model for Waste Management Plan has been developed for Nigeria based on Leontief concept and life cycle analysis. Waste was considered as source of pollution, loss of resources, and emission of green house gasses from bio-chemical treatment and decomposition, with negative impact on the ...

  17. Approaches and Tools Used to Teach the Computer Input/Output Subsystem: A Survey

    Science.gov (United States)

    Larraza-Mendiluze, Edurne; Garay-Vitoria, Nestor

    2015-01-01

    This paper surveys how the computer input/output (I/O) subsystem is taught in introductory undergraduate courses. It is important to study the educational process of the computer I/O subsystem because, in the curricula recommendations, it is considered a core topic in the area of knowledge of computer architecture and organization (CAO). It is…

  18. What nervous systems do : Early evolution, input-output, and the skin brain thesis

    NARCIS (Netherlands)

    Keijzer, Fred; van Duijn, Marc; Lyon, Pamela

    Nervous systems are standardly interpreted as information processing input-output devices. They receive environmental information from their sensors as input, subsequently process or adjust this information, and use the result to control effectors, providing output. Through-conducting activity is

  19. Regional disaster impact analysis: comparing Input-Output and Computable General Equilibrium models

    NARCIS (Netherlands)

    Koks, E.E.; Carrera, L.; Jonkeren, O.; Aerts, J.C.J.H.; Husby, T.G.; Thissen, M.; Standardi, G.; Mysiak, J.

    2016-01-01

    A variety of models have been applied to assess the economic losses of disasters, of which the most common ones are input-output (IO) and computable general equilibrium (CGE) models. In addition, an increasing number of scholars have developed hybrid approaches: one that combines both or either of

  20. Economic and environmental impacts of dietary changes in Iran : an input-output analysis

    NARCIS (Netherlands)

    Rahmani, R.; Bakhshoodeh, M.; Zibaei, M.; Heijman, W.J.M.; Eftekhari, M.H.

    2012-01-01

    Iran's simple and environmentally extended commodity by commodity input-output (IO) model was used to determine the impacts of dietary changes on the Iranian economy and on the environmental load. The original model is based on the status-quo diet and was modified to include the World Health

  1. The Economic Impact of Higher Education Institutions in Ireland: Evidence from Disaggregated Input-Output Tables

    Science.gov (United States)

    Zhang, Qiantao; Larkin, Charles; Lucey, Brian M.

    2017-01-01

    While there has been a long history of modelling the economic impact of higher education institutions (HEIs), little research has been undertaken in the context of Ireland. This paper provides, for the first time, a disaggregated input-output table for Ireland's higher education sector. The picture painted overall is a higher education sector that…

  2. An input-output energy analysis in pistachio nut production: A case ...

    African Journals Online (AJOL)

    This research examined the energy use pattern and energy input/output analysis of pistachio nut widely grown in the South-eastern Anatolia, Turkey. For this purpose, data from pistachio nut production were collected in 61 farms from ten villages by a questionnaire which was selected according to their regional properties.

  3. Deflation of input-output tables from the user's point of view : a heuristic approach

    NARCIS (Netherlands)

    Dietzenbacher, Erik; Hoen, A.R.

    This paper considers the problem of deflating an input-output table from the viewpoint of the user. In many practical cases certain margins of this table are readily available in constant prices, whereas the entire table is not. This reduces the problem to estimating the matrix of sectoral

  4. Logistics flows and enterprise input-output models: aggregate and disaggregate analysis

    NARCIS (Netherlands)

    Albino, V.; Yazan, Devrim; Messeni Petruzzelli, A.; Okogbaa, O.G.

    2011-01-01

    In the present paper, we propose the use of enterprise input-output (EIO) models to describe and analyse the logistics flows considering spatial issues and related environmental effects associated with production and transportation processes. In particular, transportation is modelled as a specific

  5. The economic impact of multifunctional agriculture in The Netherlands: A regional input-output model

    NARCIS (Netherlands)

    Heringa, P.W.; Heide, van der C.M.; Heijman, W.J.M.

    2012-01-01

    Multifunctional agriculture is a broad concept lacking a precise and uniform definition. Moreover, little is known about the societal importance of multifunctional agriculture. This paper is an empirical attempt to fill this gap. To this end, an input-output model is constructed for multifunctional

  6. The economic impact of multifunctional agriculture in Dutch regions: An input-output model

    NARCIS (Netherlands)

    Heringa, P.W.; Heide, van der C.M.; Heijman, W.J.M.

    2013-01-01

    Multifunctional agriculture is a broad concept lacking a precise definition. Moreover, little is known about the societal importance of multifunctional agriculture. This paper is an empirical attempt to fill this gap. To this end, an input-output model was constructed for multifunctional agriculture

  7. Pengaruh Sektor Pariwisata Terhadap Perekonomian dan Keruangan Kota Bukittinggi (Pendekatan Analisis Input Output

    Directory of Open Access Journals (Sweden)

    Desi Arianti

    2014-12-01

    Full Text Available Bukittinggi city is one of the city located in the province of West Sumatra .  Although it does not have the potential of natural resources that can be exploited , Bukittinggi has another potential, which is a beautiful natural conditions, the air is cool, has a historic heritage places, and is located in a strategic position potentially make this city as tourists visiting the area.  Because of the potential of the tourism sector serve as a leading sector in the city of Bukittinggi, which is expected to be the main driver of the city economy.  This research was conducted with input-output analysis approach , to examine how the influence of the tourism sector and linkages with other sectors of the economy of the town of Bukittinggi.  Moreover it will be seen also how the spatial effect of the tourism sector on the pattern and structure of urban space Bukittinggi. The influence of the tourism sector to the economy of Bukittinggi shows the role of the tourism sector to the total demand is 40.86% when grouped into the business field of agriculture and mining sector, industrial sector, tourism sector and the service sector. Linkages with other sectors of the tourism sector seen from the spread of the power index and the degree of sensitivity, all sectors related to tourism activities have spread of power index > 1.  But the degree of sensitivity index > 1 only occurs in large & retail trade sector and the transport, while the hotel secto , restaurants and entertainment and recreation has index < 1.  Multiplier effect of all relevant sectors of tourism activities have a relatively large effect on both the output multiplier effects, household income and employment.  Application of financial input scenarios, showing the influence of the tourism sector on the economy will be larger Bukittinggi if allocated greater financial inputs to the sectors of tourism, both in the form of government spending and investment spending.  The existence of

  8. The Use of Input-Output Control System Analysis for Sustainable Development of Multivariable Environmental Systems

    Science.gov (United States)

    Koliopoulos, T. C.; Koliopoulou, G.

    2007-10-01

    We present an input-output solution for simulating the associated behavior and optimized physical needs of an environmental system. The simulations and numerical analysis determined the accurate boundary loads and areas that were required to interact for the proper physical operation of a complicated environmental system. A case study was conducted to simulate the optimum balance of an environmental system based on an artificial intelligent multi-interacting input-output numerical scheme. The numerical results were focused on probable further environmental management techniques, with the objective of minimizing any risks and associated environmental impact to protect the quality of public health and the environment. Our conclusions allowed us to minimize the associated risks, focusing on probable cases in an emergency to protect the surrounded anthropogenic or natural environment. Therefore, the lining magnitude could be determined for any useful associated technical works to support the environmental system under examination, taking into account its particular boundary necessities and constraints.

  9. Solid wastes integrated management in Rio de Janeiro: input-output analysis

    International Nuclear Information System (INIS)

    Pimenteira, C.A.P.; Carpio, L.G.T.; Rosa, L.P.; Tolmansquim, M.T.

    2005-01-01

    This paper analyzes the socioeconomic aspects of solid waste management in Rio de Janeiro. An 'input-output' methodology was used to examine how the secondary product resulting from recycling is re-introduced into the productive process. A comparative profile was developed from the state of recycling and the various other aspects of solid waste management, both from the perspective of its economic feasibility and from the social aspects involved. This was done analyzing the greenhouse gas emissions and the decreased energy consumption. The effects of re-introducing recycled raw materials into the matrix and the ensuing reduction of the demand for virgin raw materials was based on the input-output matrix for the State of Rio de Janeiro. This paper also analyzes the energy savings obtained from recycling and measures the avoided emissions of greenhouse gases

  10. Study and development of a generalised input-output system for data base management systems

    International Nuclear Information System (INIS)

    Zidi, Noureddine

    1975-01-01

    This thesis reports a study which aimed at designing and developing a software for the management and execution of all input-output actions of data base management systems. This software is also an interface between data base management systems and the various operating systems. After a recall of general characteristics of database management systems, the author presents the previously developed GRISBI system (rational management of information stored in an integrated database), and describes difficulties faced to adapt this system to the new access method (VSAM, virtual sequential access method). This lead to the search for a more general solution, the development of which is presented in the second part of this thesis: environment of the input-output generalised system, architecture, internal specifications. The last part presents flowcharts and statements of the various routines [fr

  11. Graphical user interface for input output characterization of single variable and multivariable highly nonlinear systems

    Directory of Open Access Journals (Sweden)

    Shahrukh Adnan Khan M. D.

    2017-01-01

    Full Text Available This paper presents a Graphical User Interface (GUI software utility for the input/output characterization of single variable and multivariable nonlinear systems by obtaining the sinusoidal input describing function (SIDF of the plant. The software utility is developed on MATLAB R2011a environment. The developed GUI holds no restriction on the nonlinearity type, arrangement and system order; provided that output(s of the system is obtainable either though simulation or experiments. An insight to the GUI and its features are presented in this paper and example problems from both single variable and multivariable cases are demonstrated. The formulation of input/output behavior of the system is discussed and the nucleus of the MATLAB command underlying the user interface has been outlined. Some of the industries that would benefit from this software utility includes but not limited to aerospace, defense technology, robotics and automotive.

  12. EPICS Input/Output Controller (IOC) application developer's guide. APS Release 3.12

    International Nuclear Information System (INIS)

    Kraimer, M.R.

    1994-11-01

    This document describes the core software that resides in an Input/Output Controller (IOC), one of the major components of EPICS. The basic components are: (OPI) Operator Interface; this is a UNIX based workstation which can run various EPICS tools; (IOC) Input/Output Controller; this is a VME/VXI based chassis containing a Motorola 68xxx processor, various I/O modules, and VME modules that provide access to other I/O buses such as GPIB, (LAN), Local Area Network; and this is the communication network which allows the IOCs and OPIs to communicate. Epics provides a software component, Channel Access, which provides network transparent communication between a Channel Access client and an arbitrary number of Channel Access servers

  13. Low-carbon building assessment and multi-scale input-output analysis

    Science.gov (United States)

    Chen, G. Q.; Chen, H.; Chen, Z. M.; Zhang, Bo; Shao, L.; Guo, S.; Zhou, S. Y.; Jiang, M. M.

    2011-01-01

    Presented as a low-carbon building evaluation framework in this paper are detailed carbon emission account procedures for the life cycle of buildings in terms of nine stages as building construction, fitment, outdoor facility construction, transportation, operation, waste treatment, property management, demolition, and disposal for buildings, supported by integrated carbon intensity databases based on multi-scale input-output analysis, essential for low-carbon planning, procurement and supply chain design, and logistics management.

  14. Input/Output of ab-initio nuclear structure calculations for improved performance and portability

    International Nuclear Information System (INIS)

    Laghave, Nikhil

    2010-01-01

    Many modern scientific applications rely on highly computation intensive calculations. However, most applications do not concentrate as much on the role that input/output operations can play for improved performance and portability. Parallelizing input/output operations of large files can significantly improve the performance of parallel applications where sequential I/O is a bottleneck. A proper choice of I/O library also offers a scope for making input/output operations portable across different architectures. Thus, use of parallel I/O libraries for organizing I/O of large data files offers great scope in improving performance and portability of applications. In particular, sequential I/O has been identified as a bottleneck for the highly scalable MFDn (Many Fermion Dynamics for nuclear structure) code performing ab-initio nuclear structure calculations. We develop interfaces and parallel I/O procedures to use a well-known parallel I/O library in MFDn. As a result, we gain efficient I/O of large datasets along with their portability and ease of use in the down-stream processing. Even situations where the amount of data to be written is not huge, proper use of input/output operations can boost the performance of scientific applications. Application checkpointing offers enormous performance improvement and flexibility by doing a negligible amount of I/O to disk. Checkpointing saves and resumes application state in such a manner that in most cases the application is unaware that there has been an interruption to its execution. This helps in saving large amount of work that has been previously done and continue application execution. This small amount of I/O provides substantial time saving by offering restart/resume capability to applications. The need for checkpointing in optimization code NEWUOA has been identified and checkpoint/restart capability has been implemented in NEWUOA by using simple file I/O.

  15. Energy analysis handbook. CAC document 214. [Combining process analysis with input-output analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bullard, C. W.; Penner, P. S.; Pilati, D. A.

    1976-10-01

    Methods are presented for calculating the energy required, directly and indirectly, to produce all types of goods and services. Procedures for combining process analysis with input-output analysis are described. This enables the analyst to focus data acquisition cost-effectively, and to achieve a specified degree of accuracy in the results. The report presents sample calculations and provides the tables and charts needed to perform most energy cost calculations, including the cost of systems for producing or conserving energy.

  16. Development of algorithm for depreciation costs allocation in dynamic input-output industrial enterprise model

    OpenAIRE

    Keller Alevtina; Vinogradova Tatyana

    2017-01-01

    The article considers the issue of allocation of depreciation costs in the dynamic inputoutput model of an industrial enterprise. Accounting the depreciation costs in such a model improves the policy of fixed assets management. It is particularly relevant to develop the algorithm for the allocation of depreciation costs in the construction of dynamic input-output model of an industrial enterprise, since such enterprises have a significant amount of fixed assets. Implementation of terms of the...

  17. CONSTRUCTION OF A DYNAMIC INPUT-OUTPUT MODEL WITH A HUMAN CAPITAL BLOCK

    Directory of Open Access Journals (Sweden)

    Baranov A. O.

    2017-03-01

    Full Text Available The accumulation of human capital is an important factor of economic growth. It seems to be useful to include «human capital» as a factor of a macroeconomic model, as it helps to take into account the quality differentiation of the workforce. Most of the models usually distinguish labor force by the levels of education, while some of the factors remain unaccounted. Among them are health status and culture development level, which influence productivity level as well as gross product reproduction. Inclusion of the human capital block to the interindustry model can help to make it more reliable for economic development forecasting. The article presents a mathematical description of the extended dynamic input-output model (DIOM with a human capital block. The extended DIOM is based on the Input-Output Model from The KAMIN system (the System of Integrated Analyses of Interindustrial Information developed at the Institute of Economics and Industrial Engineering of the Siberian Branch of the Academy of Sciences of the Russian Federation and at the Novosibirsk State University. The extended input-output model can be used to analyze and forecast development of Russian economy.

  18. Economic structure and pollution intensity within the environmental input-output framework

    International Nuclear Information System (INIS)

    Llop, Maria

    2007-01-01

    The environmental input-output approach reveals the channels through which the environmental burdens of production activities are transmitted throughout the economy. This paper uses the input-output framework and analyses the changes in Spanish emission multipliers during the period 1995-2000. By decomposing the total changes in multipliers into different components, it is possible to evaluate separately the effects of economic structure and pollution intensity captured by the environmental input-output model. Specifically, in this study, we distinguish between the effects on multipliers caused by changes in emission coefficients (the pollution intensity effects) and the effects on multipliers caused by changes in technical coefficients (the economic structure effects). Our results show a significant reduction in the pollution intensity of production activities, which contributed negatively to changes in emission multipliers. They also show that the economic structure contributed positively to changes in emission multipliers. Together, these two effects lead to a small reduction in multipliers during the period of analysis. My results also show significant differences in the individual behaviour of different sectors in terms of their contribution to multiplier changes. Since there are considerable differences in the way individual sectors affect the changes in emission levels, and in the intensity of these effects, this means that the final effects will basically depend on the activity considered

  19. Input-Output Modeling for Urban Energy Consumption in Beijing: Dynamics and Comparison

    Science.gov (United States)

    Zhang, Lixiao; Hu, Qiuhong; Zhang, Fan

    2014-01-01

    Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect) energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce) to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making. PMID:24595199

  20. Local-scale systems input-output analysis of embodied water for the Beijing economy in 2007

    Science.gov (United States)

    Han, Mengyao; Guo, Shan; Chen, Hui; Ji, Xi; Li, Jiashuo

    2014-09-01

    Using the most detailed and recent statistics available for Beijing, a local-scale embodiment analysis on water use was conducted, employing a systems input-output analysis that integrates economic systems with natural resources data. Systems analysis for water research at the local scale is a crucial part of a systems oriented water accounting framework. To our knowledge, however, related works have not been thoroughly conducted. In this paper, a set of embodied water intensity inventory data is presented, which is applicable to both intermediate input and final demand. Also, detailed analyses of Beijing's embodied water use accounting are presented. The embodied water intensity of the Water Production and Supply Industry Sector turns out to be the highest among the 42 sectors. For water embodied in final demand, the total amount is 3.48 km3, of which the water embodied in urban household consumption makes up nearly a half proportion. As a net virtual water importer, Beijing's water embodied in commodity trade totals 5.84×108 m3. As a result, in addition to improvements in technology and water use efficiency, adjustments in industrial structure and trade policies are also of significant importance to water conservation efforts.

  1. Decoupling and Sources of Structural Transformation of East Asian Economies: An International Input-Output Decomposition Analysis

    Directory of Open Access Journals (Sweden)

    Jong-Hwan Ko

    2014-03-01

    Full Text Available This study aims to answer two questions using input-output decomposition analysis: 1 Have emerging Asian economies decoupled? 2 What are the sources of structural changes in gross outputs and value-added of emerging Asian economies related to the first question? The main findings of the study are as follows: First, since 1990, there has been a trend of increasing dependence on exports to extra-regions such as G3 and the ROW, indicating no sign of "decoupling", but rather an increasing integration of emerging Asian countries into global trade. Second, there is a contrasting feature in the sources of structural changes between non-China emerging Asia and China. Dependence of non-China emerging Asia on intra-regional trade has increased in line with strengthening economic integration in East Asia, whereas China has disintegrated from the region. Therefore, it can be said that China has contributed to no sign of decoupling of emerging Asia as a whole.

  2. Applying physical input-output tables of energy to estimate the energy ecological footprint (EEF) of Galicia (NW Spain)

    International Nuclear Information System (INIS)

    Carballo Penela, Adolfo; Sebastian Villasante, Carlos

    2008-01-01

    Nowadays, the achievement of sustainable development constitutes an important constraint in the design of energy policies, being necessary the development of reliable indicators to obtain helpful information about the use of energy resources. The ecological footprint (EF) provides a referential framework for the analysis of human demand for bioproductivity, including energy issues. In this article, the theoretical bases of the footprint analysis are described by applying input-output tables of energy to estimate the Galician energy ecological footprint (EEF). It is concluded that the location of highly polluting industries in Galicia makes the Galician EEF quite higher than more developed regions of Spain. The relevance of the outer component of the Galician EEF is also studied. First, available information seems to indicate that the energy incorporated to the trading of manufactured goods would notably increase the Galician consumption of energy. On the other hand, the inclusion of electricity trade in the EEF analysis, including an adjustment, following the same philosophy as with manufactured goods is proposed. This adjustment would substantially reduce the Galician EEF, as the exported electricity widely exceeds the imported one

  3. Applying physical input-output tables of energy to estimate the energy ecological footprint (EEF) of Galicia (NW Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Carballo Penela, Adolfo; Sebastian Villasante, Carlos [Fisheries Economics and Natural Resources Research Group, Department of Applied Economics, University of Santiago de Compostela, Faculty of Economics and Business Administration, Avenida Burgo das Nacions s/n. CP. 15782 Santiago de Compostela, A Coruna Galicia (Spain)

    2008-03-15

    Nowadays, the achievement of sustainable development constitutes an important constraint in the design of energy policies, being necessary the development of reliable indicators to obtain helpful information about the use of energy resources. The ecological footprint (EF) provides a referential framework for the analysis of human demand for bioproductivity, including energy issues. In this article, the theoretical bases of the footprint analysis are described by applying input-output tables of energy to estimate the Galician energy ecological footprint (EEF). It is concluded that the location of highly polluting industries in Galicia makes the Galician EEF quite higher than more developed regions of Spain. The relevance of the outer component of the Galician EEF is also studied. First, available information seems to indicate that the energy incorporated to the trading of manufactured goods would notably increase the Galician consumption of energy. On the other hand, the inclusion of electricity trade in the EEF analysis, including an adjustment, following the same philosophy as with manufactured goods is proposed. This adjustment would substantially reduce the Galician EEF, as the exported electricity widely exceeds the imported one. (author)

  4. Modeling the short-run effect of fiscal stimuli on GDP : A new semi-closed input-output model

    NARCIS (Netherlands)

    Chen, Quanrun; Dietzenbacher, Erik; Los, Bart; Yang, Cuihong

    2016-01-01

    In this study, we propose a new semi-closed input-output model, which reconciles input-output analysis with modern consumption theories. It can simulate changes in household consumption behavior when exogenous stimulus policies lead to higher disposable income levels. It is useful for quantifying

  5. Decreased Hering-Breuer input-output entrainment in a mouse model of Rett syndrome

    Directory of Open Access Journals (Sweden)

    Rishi R Dhingra

    2013-04-01

    Full Text Available Rett syndrome, a severe X-linked neurodevelopmental disorder caused by mutations in the gene encoding methyl-CpG-binding protein 2 (Mecp2, is associated with a highly irregular respiratory pattern including severe upper-airway dysfunction. Recent work suggests that hyperexcitability of the Hering-Breuer reflex (HBR pathway contributes to respiratory dysrhythmia in Mecp2 mutant mice. To assess how enhanced HBR input impacts respiratory entrainment by sensory afferents in closed-loop in vivo-like conditions, we investigated the input (vagal stimulus trains – output (phrenic bursting entrainment via the HBR in wild-type and Mecp2-deficient mice. Using the in situ perfused brainstem preparation, which maintains an intact pontomedullary axis capable of generating an in vivo-like respiratory rhythm in the absence of the HBR, we mimicked the HBR feedback input by stimulating the vagus nerve (at threshold current, 0.5 ms pulse duration, 75 Hz pulse frequency, 100 ms train duration at an inter-burst frequency matching that of the intrinsic oscillation of the inspiratory motor output of each preparation. Using this approach, we observed significant input-output entrainment in wild-type mice as measured by the maximum of the cross-correlation function, the peak of the instantaneous relative phase distribution, and the mutual information of the instantaneous phases. This entrainment was associated with a reduction in inspiratory duration during feedback stimulation. In contrast, the strength of input-output entrainment was significantly weaker in Mecp2-/+ mice. However, Mecp2-/+ mice also had a reduced inspiratory duration during stimulation, indicating that reflex behavior in the HBR pathway was intact. Together, these observations suggest that the respiratory network compensates for enhanced sensitivity of HBR inputs by reducing HBR input-output entrainment.

  6. Las redes sociales como herramienta de análisis estructural input-output.

    Directory of Open Access Journals (Sweden)

    García Muñiz, Ana Salomé

    2003-06-01

    Full Text Available Uno de los aspectos fundamentales que posibilita el conocimiento en profundidad de una economía es la realización de un análisis de su estructura productiva. Dicho análisis supone una importante ayuda no sólo en la toma de decisiones de política económica, sino también constituye un requisito indispensable y previo a las tareas de predicción necesarias en un contexto empresarial.El estudio de una economía puede abordarse desde muy diversas ópticas, una de las cuales es el enfoque input-output, el cual permite analizar conjuntamente las relaciones intersectoriales de una economía y su demanda agregada, con lo cual se dispone de un conocimiento integrado de la actividad económica. Consideramos la teoría de redes como una importante “herramienta”, a nuestro juicio poco explotada en el ámbito económico, que constituye un marco general de estudio dentro del cual podemos encuadrar el análisis input-output. Esta teoría permite simplificar el esquema de relaciones surgido entre los sectores de una economía y, por lo tanto, favorecer la comprensión del mismo. El objetivo del presente trabajo es analizar las relaciones interindustriales bajo la óptica de la teoría de las redes sociales y, al mismo tiempo, efectuar una comparación entre los resultados así obtenidos y los que se derivan de la aplicación de los métodos input-output clásicos.

  7. Development of algorithm for depreciation costs allocation in dynamic input-output industrial enterprise model

    Directory of Open Access Journals (Sweden)

    Keller Alevtina

    2017-01-01

    Full Text Available The article considers the issue of allocation of depreciation costs in the dynamic inputoutput model of an industrial enterprise. Accounting the depreciation costs in such a model improves the policy of fixed assets management. It is particularly relevant to develop the algorithm for the allocation of depreciation costs in the construction of dynamic input-output model of an industrial enterprise, since such enterprises have a significant amount of fixed assets. Implementation of terms of the adequacy of such an algorithm itself allows: evaluating the appropriateness of investments in fixed assets, studying the final financial results of an industrial enterprise, depending on management decisions in the depreciation policy. It is necessary to note that the model in question for the enterprise is always degenerate. It is caused by the presence of zero rows in the matrix of capital expenditures by lines of structural elements unable to generate fixed assets (part of the service units, households, corporate consumers. The paper presents the algorithm for the allocation of depreciation costs for the model. This algorithm was developed by the authors and served as the basis for further development of the flowchart for subsequent implementation with use of software. The construction of such algorithm and its use for dynamic input-output models of industrial enterprises is actualized by international acceptance of the effectiveness of the use of input-output models for national and regional economic systems. This is what allows us to consider that the solutions discussed in the article are of interest to economists of various industrial enterprises.

  8. Runtime analysis of the (1+1) EA on computing unique input output sequences

    DEFF Research Database (Denmark)

    Lehre, Per Kristian; Yao, Xin

    2010-01-01

    Computing unique input output (UIO) sequences is a fundamental and hard problem in conformance testing of finite state machines (FSM). Previous experimental research has shown that evolutionary algorithms (EAs) can be applied successfully to find UIOs for some FSMs. However, before EAs can...... in the theoretical analysis, and the variability of the runtime. The numerical results fit well with the theoretical results, even for small problem instance sizes. Together, these results provide a first theoretical characterisation of the potential and limitations of the (1 + 1) EA on the problem of computing UIOs....

  9. Input-output relations for a three-port grating coupled Fabry-Perot cavity

    OpenAIRE

    Bunkowski, Alexander; Burmeister, Oliver; Danzmann, Karsten; Schnabel, Roman

    2005-01-01

    We analyze an optical three-port reflection grating by means of a scattering matrix formalism. Amplitude and phase relations among the three ports, i.e., the three orders of diffraction, are derived. Such a grating can be used as an all-reflective, low-loss coupler to Fabry-Perot cavities. We derive the input-output relations of a three-port grating coupled cavity and find distinct properties that are not present in two-port coupled cavities. The cavity relations further reveal that the three...

  10. Simulation of TunneLadder Traveling-Wave Tube Input/Output Coupler Characteristics Using MAFIA

    Science.gov (United States)

    Kory, Carol L.; Qureshi, A. Haq

    1996-01-01

    RF input/output coupler characteristics for the TunneLadder traveling-wave tube have been calculated using the three-dimensional computer code, MAFIA and compared to experimental data with good agreement. Theory behind coupling of the TunneLadder interaction circuit to input and output waveguides is presented and VSWR data is calculated for variations on principal coupler dimensions to provide insight into manufacturing tolerances necessary for acceptable performance. Accuracy of results using MAFIA demonstrates how experimental hardware testing of three-dimensional coupler designs can be reduced.

  11. Propagation effects of taxes in Romania: An input-output analysis

    Directory of Open Access Journals (Sweden)

    GHEORGHE ZAMAN

    2010-06-01

    Full Text Available The Input-Output model (IO is an important tool of economic analysis, providing a predictive analysis framework for economic changes, if properly used. In developing measures, strategies, etc. at macro level it is important to identify the links that occur between branches of the economy for a better understanding of ôenablerö branches which have the highest contribution to output creation. In this research the IO method was used to analyze effects of taxes within the Romanian economy, based on data provided by the National Institute of Statistics (NIS, using IO statistical tables for 2000 and 2006.

  12. Design of vaccination and fumigation on Host-Vector Model by input-output linearization method

    Science.gov (United States)

    Nugraha, Edwin Setiawan; Naiborhu, Janson; Nuraini, Nuning

    2017-03-01

    Here, we analyze the Host-Vector Model and proposed design of vaccination and fumigation to control infectious population by using feedback control especially input-output liniearization method. Host population is divided into three compartments: susceptible, infectious and recovery. Whereas the vector population is divided into two compartment such as susceptible and infectious. In this system, vaccination and fumigation treat as input factors and infectious population as output result. The objective of design is to stabilize of the output asymptotically tend to zero. We also present the examples to illustrate the design model.

  13. Impact of the Smart City Industry on the Korean National Economy: Input-Output Analysis

    Directory of Open Access Journals (Sweden)

    Kyunam Kim

    2016-07-01

    Full Text Available The characteristics of the smart city industry and its effects on the national economy of Korea are investigated using input-output analysis. The definition and industrial classification of a smart city are established using the Delphi technique for experts in various fields, from information and communication technologies (ICT to governmental policies for urban matters. The results of the analysis, including the production, value added and employment induction effects, show that the smart city industry has intermediate characteristics between ICT and urban construction industries, indicating that acquisition of the competitive edge of both the ICT and construction industries is the key to the success of the smart city industry. The crucial industries related to the smart city industry are identified based on an analysis of the forward and backward linkage effects, the results of which suggest the importance of the relevant service industries. The economic effects on the national economy induced by the governmental program for smart city demonstration are estimated using input-output analysis results. Overall, the results of this study indicate that facilitation of the smart city industry plays a key role not only in the sustainable city, but also in the growth of the national economy.

  14. Snapshot Views of the Romanian Economy on Regional Level Using Input-Output Methodology

    Directory of Open Access Journals (Sweden)

    BORÓKA-JÚLIA BÍRÓ

    2014-06-01

    Full Text Available Our present paper proposes to give snapshot views on the status-quo of the Romanian economy at the level of development regions. From a methodological perspective, the study is based on the construction of an aggregated national Input-Output table from the more detailed one of the National Institute of Statistics, followed by the derivation of regional tables using the non-survey GRIT technique. Quantitative sectoral interrelationships are going to be analysed based on multipliers, backward and forward linkages in order to identify key sectors within regional economies. This could serve as a baseline for assessing the impact of several policies of the European Union on the Romanian economy, such as the Cohesion Policy and the Common Agricultural Policy. The lower territorial approach – i.e. the construction of regional Input-Output models – used within the present study is in accordance with the European Union’s NUTS2 level policy design and planning philosophy on the one hand. On the other hand, this analytic direction makes possible the use of the results as a base for regional economic development strategy design, highlighting structural specificities and discrepancies among regions of the same country.

  15. Input-output analysis in fertilizers sector. A case study of Turkey

    International Nuclear Information System (INIS)

    Karkacier, O.; Guelse, H.S.; Sayili, M.; Akca, H.

    1999-01-01

    The types of structural analysis in the input-output model known are forward and backwards ties. Fertilizer sector is tied forwardly agriculture, agri-business, chemistry, petro-chemistry and glass sector. In addition, it tied backwardly mining, chemistry, petro-chemistry, electricity, gas, water and transportation. The effect of backward tie of fertilizer sector is more important than its effect of the forward ties. In this study, by means of the year of 1979, 1985 and 1990 input-output table of Turkey the own situation of fertilizer industry and the production relation with other sectors of the economy have been tired to explain with forward and backwards ties. According to the result of the research it was determined that in 1990, (u j ) input coefficient of fertilizer sector is 69 %. That is, 69 percent of the product of fertilizer sector was used as an intermediate goods by other sectors. Therefore, 31 percent of goods produced by fertilizer sector was consumed as a final good. In addition, in this year, (w i ) intermediate use coefficient of fertilizer sector is 52 %. (w i ) intermediate use coefficient of fertilizer sector decreased from 1973 to 1990, as a result of this final use coefficient (1-w i ) increased. Refs. 5 (author)

  16. Energy prices and the post oil/energy crisis Brazilian inflation: an input-output study

    Energy Technology Data Exchange (ETDEWEB)

    Lara-Resende, M.deM.

    1982-01-01

    This study is an attempt to understand the implications of the OPEC-induced severalfold increase in the international price of oil for average and sectoral domestic prices in Brazil, a large oil-importing open developing economy. Rather than using a Keynesian model (focusing on the universal characteristics of an economy), the study makes use of an open-price input-output model (capturing the structural characteristics of the Brazilian economy). The first three chapters, descriptive in nature, place in perspective the following three, which detail the model and the empirical results. The main conclusion is that, despite the significant increase observed in the post-crisis period, the relative percentage contribution of primary energy to wholesale inflation in Brazil is still relatively minor. A conservative estimate suggests that, in the years of substantial acceleration (1974 and 1979), approximately 15% of the wholesale inflation was due to energy (basically crude oil and oil derivatives). Though such low estimates are partly due to the limitations and assumptions underlying input-output analysis, it seems that the acceleration of inflation is related to more than cost increases originating in energy prices. It also seems to be related to agricultural and labor prices, as well as to the government's decision to abruptly and inopportunely raise several important product prices.

  17. A Water-Withdrawal Input-Output Model of the Indian Economy.

    Science.gov (United States)

    Bogra, Shelly; Bakshi, Bhavik R; Mathur, Ritu

    2016-02-02

    Managing freshwater allocation for a highly populated and growing economy like India can benefit from knowledge about the effect of economic activities. This study transforms the 2003-2004 economic input-output (IO) table of India into a water withdrawal input-output model to quantify direct and indirect flows. This unique model is based on a comprehensive database compiled from diverse public sources, and estimates direct and indirect water withdrawal of all economic sectors. It distinguishes between green (rainfall), blue (surface and ground), and scarce groundwater. Results indicate that the total direct water withdrawal is nearly 3052 billion cubic meter (BCM) and 96% of this is used in agriculture sectors with the contribution of direct green water being about 1145 BCM, excluding forestry. Apart from 727 BCM direct blue water withdrawal for agricultural, other significant users include "Electricity" with 64 BCM, "Water supply" with 44 BCM and other industrial sectors with nearly 14 BCM. "Construction", "miscellaneous food products"; "Hotels and restaurants"; "Paper, paper products, and newsprint" are other significant indirect withdrawers. The net virtual water import is found to be insignificant compared to direct water used in agriculture nationally, while scarce ground water associated with crops is largely contributed by northern states.

  18. Assessing the suitability of input-output analysis for enhancing our understanding of potential economic effects of Peak Oil

    International Nuclear Information System (INIS)

    Kerschner, Christian; Hubacek, Klaus

    2009-01-01

    Given recent developments on energy markets and skyrocketing oil prices, we argue for an urgent need to study the potential effects of world oil production reaching a maximum (Peak Oil) in order to facilitate the development of adaptation policies. We consider input-output (IO) modelling as a powerful tool for this purpose. However, the standard Leontief type model implicitly assumes that all necessary inputs to satisfy a given demand can and will be supplied. This is problematic if the availability of certain key inputs becomes restricted and it is therefore only of limited usefulness for the study of the phenomenon of Peak Oil. Hence this paper firstly reviews two alternative modelling tools within the IO framework: supply-driven and mixed models. The former has been severely criticised for its problematic assumption of perfect factor substitution and perfect elasticity of demand as revealed by Oosterhaven [Oosterhaven J. On the plausibility of the supply-driven IO model. J Reg Sci 1988; 28:203-17. ]. The supply-constrained model on the other hand proved well suited to analyse the quantity dimension of Peak Oil and is therefore applied empirically in the second part of the paper, using data for the UK, Japanese and Chilean economy. Results show how differences in net-oil exporting and net-oil importing countries are clearly visible in terms of final demand. Industries, most affected in all countries, include transportation, electricity production and financial and trade services. (author)

  19. Carbon emissions and resources use by Chinese economy 2007: A 135-sector inventory and input-output embodiment

    Science.gov (United States)

    Chen, G. Q.; Chen, Z. M.

    2010-11-01

    A 135-sector inventory and embodiment analysis for carbon emissions and resources use by Chinese economy 2007 is presented in this paper by an ecological input-output modeling based on the physical entry scheme. Included emissions and resources belong to six categories as: (1) greenhouse gas (GHG) in terms of CO 2, CH 4, and N 2O; (2) energy in terms of coal, crude oil, natural gas, hydropower, nuclear power, and firewood; (3) water in terms of freshwater; (4) exergy in terms of coal, crude oil, natural gas, grain, bean, tuber, cotton, peanut, rapeseed, sesame, jute, sugarcane, sugar beet, tobacco, silkworm feed, tea, fruits, vegetables, wood, bamboo, pulp, meat, egg, milk, wool, aquatic products, iron ore, copper ore, bauxite, lead ore, zinc ore, pyrite, phosphorite, gypsum, cement, nuclear fuel, and hydropower; (5) and (6) solar and cosmic emergies in terms of sunlight, wind power, deep earth heat, chemical power of rain, geopotential power of rain, chemical power of stream, geopotential power of stream, wave power, geothermal power, tide power, topsoil loss, coal, crude oil, natural gas, ferrous metal ore, non-ferrous metal ore, non-metal ore, cement, and nuclear fuel. Accounted based on the embodied intensities are carbon emissions and resources use embodied in the final use as rural consumption, urban consumption, government consumption, gross fixed capital formation, change in inventories, and export, as well as in the international trade balance. The resulted database is basic to environmental account of carbon emissions and resources use at various levels.

  20. The impact on chinese economic growth and energy consumption of the Global Financial Crisis: An input-output analysis

    International Nuclear Information System (INIS)

    Yuan, Chaoqing; Liu, Sifeng; Xie, Naiming

    2010-01-01

    The dependence on foreign trade increased sharply in China, and therefore Chinese economy is obviously export-oriented. The Global Financial Crisis will impact the Chinese economic growth violently. Chinese government has recently adopted some effective measures to fight against the Global Financial Crisis. The most important measure is the 4 trillion Yuan ($586 billion) stimulus plan which was announced on November 9, 2008. This paper discusses the influence on energy consumption and economic growth of Global Financial Crisis and the stimulus plan against it by input-output analysis. The results show that the fall of exports caused by the Global Financial Crisis will lead to a decrease of 7.33% in GDP (Gross Domestic Production) and a reduction of 9.21% in energy consumption; the stimulus plan against the Global Financial Crisis will lead to an increase of 4.43% in economic growth and an increase of 1.83% in energy consumption; In the Global Financial Crisis, energy consumption per unit GDP will fall in China. (author)

  1. A comprehensive estimation of the economic effects of meteorological services based on the input-output method.

    Science.gov (United States)

    Wu, Xianhua; Wei, Guo; Yang, Lingjuan; Guo, Ji; Lu, Huaguo; Chen, Yunfeng; Sun, Jian

    2014-01-01

    Concentrating on consuming coefficient, partition coefficient, and Leontief inverse matrix, relevant concepts and algorithms are developed for estimating the impact of meteorological services including the associated (indirect, complete) economic effect. Subsequently, quantitative estimations are particularly obtained for the meteorological services in Jiangxi province by utilizing the input-output method. It is found that the economic effects are noticeably rescued by the preventive strategies developed from both the meteorological information and internal relevance (interdependency) in the industrial economic system. Another finding is that the ratio range of input in the complete economic effect on meteorological services is about 1 : 108.27-1 : 183.06, remarkably different from a previous estimation based on the Delphi method (1 : 30-1 : 51). Particularly, economic effects of meteorological services are higher for nontraditional users of manufacturing, wholesale and retail trades, services sector, tourism and culture, and art and lower for traditional users of agriculture, forestry, livestock, fishery, and construction industries.

  2. Input-output analysis of Vietnamese structural changes (1989-1995

    Directory of Open Access Journals (Sweden)

    Yul Kwon

    1999-09-01

    Full Text Available The pattern and sequencing of economic reform in transition economies have become a major issue of interest since the late 1980s. While Eastern Europe and especially the Soviet Union have experienced difficulties in their transition to a market-based economy, Vietnamese reform has proceeded relatively smoothly and resulted in significant improvement in economic performance and macroeconomic stabilization. The purpose of this paper is to analyze the distinctive features of the gradual reform process in Vietnam, and focused on the empirical study of the significant impacts of structural changes and their characteristics in its transition to a market-oriented economy. This paper then proceeds to a discussion of Vietnamese reform utilizing inter-industry analysis. In this analysis, a series of input-output tables are used, in which 25 sectors grouped into 9 major industries of 1989 and 1995 are classified. These input-output tables demonstrate how the output of each industry is distributed among industries and sectors of the economy. At the same time it shows the input to each industry from other industries and sectors. Derived and listed are the important coefficients and linkage effects for inter-industry relation analysis. The results of inter-industry analysis by using a series of input-output tables are as follows: 1 The ratio of domestic production in total supply of output declined due to increased imports; 2 The share of manufacturing production in domestic output and backward linkage effect to other sectors have declined in the open economy; 3 The agricultural sector has continued to play a greater role in overall production and exports than does the manufacturing sector. We find that the key to achieving sustained development in Vietnam will be the ability of the agriculture sector to yield sufficiently large agricultural surpluses on a consistent basis and then utilize such surpluses for productive investment in the underdeveloped

  3. Value-Added-Based Accounting of CO2 Emissions: A Multi-Regional Input-Output Approach

    Directory of Open Access Journals (Sweden)

    Hongguang Liu

    2017-12-01

    Full Text Available In the era of globalization and international trade, the production-based CO2 emissions accounting system, proposed by United Nations Framework Convention on Climate Change, can easily lead to a “carbon leakage” issue. Thus, the accounting of consumption-based carbon emissions and carbon emissions embodied in international trade has received considerable research attention. Nevertheless, researchers also indicated that the consumption-based principle has some weaknesses, for example, it leads the producers inert on reducing carbon emissions while gaining economic benefits. To share carbon emissions responsibilities between producers and consumers is widely recognized. So, setting an income-based emissions accounting method as to producer is a necessary complement for accounting national carbon emissions. This study promoted a model, called the value-added-based accounting of CO2 emissions method, to account for anthropogenic CO2 emissions within the context of the economic benefit principle. Based on the global multi-regional input-output table and national carbon emissions database, we calculated the national/regional carbon emissions based on the value-added accounting approach as well as the amount of global carbon emissions embodied in value-added chains. If the results are served as a supplement for calculating the amount of CO2 emissions reduction that a country is responsible for, problems such as carbon leakage and resistance to improving the energy efficiency of exporting sector may be solved, because all the supply chains emissions associated with the economic growth of a country would be considered.

  4. Analysis of possibilities of early diagnostics criteria for Parkinson's disease based on analysis of the input-output curve

    Directory of Open Access Journals (Sweden)

    Janković Marko

    2013-01-01

    Full Text Available In this paper, we analyze the possibilities of the diagnosis of Parkinson's disease at an early stage, based on characteristics of the input-output curve. The input-output (IO curve was analyzed in two ways: we analyzed the gain of the curve for low-level transcranial stimulation and we analyzed the overall 'quality' of the IO curve. The 'quality' of the curve calculation is based on basic concepts from quantum mechanics and calculation of Tsallis entropy.

  5. Evaluating the economic damages of transport disruptions using a transnational and interregional input-output model for Japan, China, and South Korea

    Science.gov (United States)

    Irimoto, Hiroshi; Shibusawa, Hiroyuki; Miyata, Yuzuru

    2017-10-01

    Damage to transportation networks as a result of natural disasters can lead to economic losses due to lost trade along those links in addition to the costs of damage to the infrastructure itself. This study evaluates the economic damages of transport disruptions such as highways, tunnels, bridges, and ports using a transnational and interregional Input-Output Model that divides the world into 23 regions: 9 regions in Japan, 7 regions in China, and 4 regions in Korea, Taiwan, ASEAN5, and the USA to allow us to focus on Japan's regional and international links. In our simulation, economic ripple effects of both international and interregional transport disruptions are measured by changes in the trade coefficients in the input-output model. The simulation showed that, in the case of regional links in Japan, a transport disruption in the Kanmon Straits causes the most damage to our targeted world, resulting in economic damage of approximately 36.3 billion. In the case of international links among Japan, China, and Korea, damage to the link between Kanto in Japan and Huabei in China causes economic losses of approximately 31.1 billion. Our result highlights the importance of disaster prevention in the Kanmon Straits, Kanto, and Huabei to help ensure economic resilience.

  6. Tourism and Economic Development in Romania: Input-Output Analysis Perspective

    Directory of Open Access Journals (Sweden)

    MARIUS SURUGIU

    2010-12-01

    Full Text Available Tourism provides a lot of opportunities for sustainable economic development. At local level, by its triggering effect it could represent a factor of economic recovery, by putting to good use the local material and human potential. By its position of predominantly final-branch, tourism exercises to a large impact on national economy by the vector of final demand, for which the possible and/or desirable variant for the future is an economic-social demand that must be satisfied by variants of total output. Using the input-output model (IO model a comparison was made of the matrix of direct technical coefficients (aij and the one of the total requirement coefficients (bij with the assistance of which the direct and propagated effects were determined for this activity by the indicators defining the dimensions of national economy.

  7. Application of a Linear Input/Output Model to Tankless Water Heaters

    Energy Technology Data Exchange (ETDEWEB)

    Butcher T.; Schoenbauer, B.

    2011-12-31

    In this study, the applicability of a linear input/output model to gas-fired, tankless water heaters has been evaluated. This simple model assumes that the relationship between input and output, averaged over both active draw and idle periods, is linear. This approach is being applied to boilers in other studies and offers the potential to make a small number of simple measurements to obtain the model parameters. These parameters can then be used to predict performance under complex load patterns. Both condensing and non-condensing water heaters have been tested under a very wide range of load conditions. It is shown that this approach can be used to reproduce performance metrics, such as the energy factor, and can be used to evaluate the impacts of alternative draw patterns and conditions.

  8. Torque ripple reduction of brushless DC motor based on adaptive input-output feedback linearization.

    Science.gov (United States)

    Shirvani Boroujeni, M; Markadeh, G R Arab; Soltani, J

    2017-09-01

    Torque ripple reduction of Brushless DC Motors (BLDCs) is an interesting subject in variable speed AC drives. In this paper at first, a mathematical expression for torque ripple harmonics is obtained. Then for a non-ideal BLDC motor with known harmonic contents of back-EMF, calculation of desired reference current amplitudes, which are required to eliminate some selected harmonics of torque ripple, are reviewed. In order to inject the reference harmonic currents to the motor windings, an Adaptive Input-Output Feedback Linearization (AIOFBL) control is proposed, which generates the reference voltages for three phases voltage source inverter in stationary reference frame. Experimental results are presented to show the capability and validity of the proposed control method and are compared with the vector control in Multi-Reference Frame (MRF) and Pseudo-Vector Control (P-VC) method results. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  9. H∞ output-feedback fuzzy proportional-integral control of fully delayed input/output systems.

    Science.gov (United States)

    Chiu, Chian-Song; Chiang, Tung-Sheng

    2017-01-01

    This paper presents the output-feedback fuzzy proportional-integral (PI) controller design for uncertain nonlinear systems with both fully delayed input and output. Based on the Takagi-Sugeno (T-S) fuzzy model representation, the output-feedback PI control is realized via parallel distributed PI compensation and novel LMI gain design. Although the T-S fuzzy PI controller is simple, asymptotic output regulation is assured to overcome the effect of uncertainty, state delay, and full input/output delays. When considering disturbance and measurement noise, the control performance is achieved by robust gain design. Furthermore, state observers and bilinear matrix inequality conditions are removed in this paper. Finally, time-delay Chua׳s circuit system and a continuous-time stirred tank reactor are taken as applications to show the expected performance. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  10. Switched periodic systems in discrete time: stability and input-output norms

    Science.gov (United States)

    Bolzern, Paolo; Colaneri, Patrizio

    2013-07-01

    This paper deals with the analysis of stability and the characterisation of input-output norms for discrete-time periodic switched linear systems. Such systems consist of a network of time-periodic linear subsystems sharing the same state vector and an exogenous switching signal that triggers the jumps between the subsystems. The overall system exhibits a complex dynamic behaviour due to the interplay between the time periodicity of the subsystem parameters and the switching signal. Both arbitrary switching signals and signals satisfying a dwell-time constraint are considered. Linear matrix inequality conditions for stability and guaranteed H2 and H∞ performances are provided. The results heavily rely on the merge of the theory of linear periodic systems and recent developments on switched linear time-invariant systems.

  11. Extending the Multi Regional Input-Output framework to labor related impacts: a proof of concept

    DEFF Research Database (Denmark)

    Hardadi, Gilang; Pizzol, Massimo

    2017-01-01

    -O framework to social impacts. These challenges are addressed in this study where the Exiobase database was extended with new data on five quantitative indicators available from the International Labor Organization: employment; working hours; salary; occupational accident cases; and unemployment......-being measured in quality-adjusted life years was then performed. The results show an appreciable match between the databases, with justifiable interpolations for missing countries. The study demonstrates how to obtain an open and quantitative I-O database extended with indicators on labor-related impacts......Given the high potential shown by the recent developments in environmentally extended and multiregional input-output (I-O) analysis, a natural step would be to extend this theoretical framework beyond the environmental dimension to include the social dimension, in line with parallel advancements...

  12. Sample-path stability conditions for multiserver input-output processes

    Directory of Open Access Journals (Sweden)

    Muhammad El-Taha

    1994-01-01

    Full Text Available We extend our studies of sample-path stability to multiserver input-output processes with conditional output rates that may depend on the state of the system and other auxiliary processes. Our results include processes with countable as well as uncountable state spaces. We establish rate stability conditions for busy period durations as well as the input during busy periods. In addition, stability conditions for multiserver queues with possibly heterogeneous servers are given for the workload, attained service, and queue length processes. The stability conditions can be checked from parameters of primary processes, and thus can be verified a priori. Under the rate stability conditions, we provide stable versions of Little's formula for single server as well as multiserver queues. Our approach leads to extensions of previously known results. Since our results are valid pathwise, non-stationary as well as stationary processes are covered.

  13. Input-output analysis of high-speed axisymmetric isothermal jet noise

    Science.gov (United States)

    Jeun, Jinah; Nichols, Joseph W.; Jovanović, Mihailo R.

    2016-04-01

    We use input-output analysis to predict and understand the aeroacoustics of high-speed isothermal turbulent jets. We consider axisymmetric linear perturbations about Reynolds-averaged Navier-Stokes solutions of ideally expanded turbulent jets with jet Mach numbers 0.6 parabolized stability equations (PSE), and this mode dominates the response. For subsonic jets, however, the singular values indicate that the contributions of sub-optimal modes to noise generation are nearly equal to that of the optimal mode, explaining why the PSE do not fully capture the far-field sound in this case. Furthermore, high-fidelity large eddy simulation (LES) is used to assess the prevalence of sub-optimal modes in the unsteady data. By projecting LES source term data onto input modes and the LES acoustic far-field onto output modes, we demonstrate that sub-optimal modes of both types are physically relevant.

  14. Input-output analysis of high-speed turbulent jet noise

    Science.gov (United States)

    Jeun, Jinah; Nichols, Joseph W.

    2015-11-01

    We apply input-output analysis to predict and understand the aeroacoustics of high-speed isothermal turbulent jets. We consider axisymmetric linear perturbations about Reynolds-averaged Navier-Stokes solutions of ideally expanded turbulent jets with Mach numbers 0 . 6 parabolized stability equations (PSE), and this mode dominates the response. For subsonic jets, however, the singular values indicate that the contributions of suboptimal modes to noise generation are nearly equal to that of the optimal mode, explaining why PSE misses some of the farfield sound in this case. Finally, high-fidelity large eddy simulation (LES) is used to assess the prevalence of suboptimal modes in the unsteady data. By projecting LES data onto the corresponding input modes, the weighted gain of each mode is examined.

  15. Relating the environmental impact of consumption to household expenditures. An input-output analysis

    International Nuclear Information System (INIS)

    Kerkhof, Annemarie C.; Nonhebel, Sanderine; Moll, Henri C.

    2009-01-01

    In this paper we evaluate the relationships between household expenditures and the environmental impact categories climate change, acidification, eutrophication and smog formation, by combining household expenditures with environmentally extended input-output analysis. Expenditure elasticities are examined with regression analysis, and are compared and interpreted on the basis of insight at the product level. With data from the Netherlands in the year 2000, we find that environmental impact increases with increasing household expenditures, although the degree to which the environmental impact increases differs per impact category. Climate change and eutrophication increase less than proportionally with increasing expenditures. Acidification increases nearly proportionally with increasing expenditures, whereas smog formation increases more than proportionally. It appears that the mix of necessities and luxuries to which an environmental impact is related is essential in explaining the relationship. (author)

  16. ProMC: Input-output data format for HEP applications using varint encoding

    Science.gov (United States)

    Chekanov, S. V.; May, E.; Strand, K.; Van Gemmeren, P.

    2014-10-01

    A new data format for Monte Carlo (MC) events, or any structural data, including experimental data, is discussed. The format is designed to store data in a compact binary form using variable-size integer encoding as implemented in the Google's Protocol Buffers package. This approach is implemented in the PROMC library which produces smaller file sizes for MC records compared to the existing input-output libraries used in high-energy physics (HEP). Other important features of the proposed format are a separation of abstract data layouts from concrete programming implementations, self-description and random access. Data stored in PROMC files can be written, read and manipulated in a number of programming languages, such C++, JAVA, FORTRAN and PYTHON.

  17. Study of double-ring slow-light gyroscope with two input-output waveguides

    Science.gov (United States)

    Gu, Hong; Liu, Xiao-qing

    2017-10-01

    A novel structure of double-ring slow-light gyroscope with two input-output waveguides is studied. We utilize interferometric detection method, and sufficiently combine the advantages of Interferometric Fiber Optic Gyro (I-FOG) and Resonator Optic Gyro (ROG). The responses of the structure are derived and simulated. Here two experimental schemes are also proposed. By applying a square wave to the integrated phase modulator, we can make the structure work at the highest sensitivity. After applied the square wave, the system runs at linear zone, thus the angular velocity can be obtained according to the linear relationship between the phase difference and the angular velocity. The optimal parameters for the largest phase difference of light signal monitored at different output ports are investigated. Some comparisons are done in the condition of various values of transmission loss coefficients.

  18. Input-output relation and energy efficiency in the neuron with different spike threshold dynamics

    Directory of Open Access Journals (Sweden)

    Guo-Sheng eYi

    2015-05-01

    Full Text Available Neuron encodes and transmits information through generating sequences of output spikes, which is a high energy-consuming process. The spike is initiated when membrane depolarization reaches a threshold voltage. In many neurons, threshold is dynamic and depends on the rate of membrane depolarization (dV/dt preceding a spike. Identifying the metabolic energy involved in neural coding and their relationship to threshold dynamic is critical to understanding neuronal function and evolution. Here, we use a modified Morris-Lecar model to investigate neuronal input-output property and energy efficiency associated with different spike threshold dynamics. We find that the neurons with dynamic threshold sensitive to dV/dt generate discontinuous frequency-current curve and type II phase response curve (PRC through Hopf bifurcation, and weak noise could prohibit spiking when bifurcation just occurs. The threshold that is insensitive to dV/dt, instead, results in a continuous frequency-current curve, a type I PRC and a saddle-node on invariant circle bifurcation, and simultaneously weak noise cannot inhibit spiking. It is also shown that the bifurcation, frequency-current curve and PRC type associated with different threshold dynamics arise from the distinct subthreshold interactions of membrane currents. Further, we observe that the energy consumption of the neuron is related to its firing characteristics. The depolarization of spike threshold improves neuronal energy efficiency by reducing the overlap of Na+ and K+ currents during an action potential. The high energy efficiency is achieved at more depolarized spike threshold and high stimulus current. These results provide a fundamental biophysical connection that links spike threshold dynamics, input-output relation, energetics and spike initiation, which could contribute to uncover neural encoding mechanism.

  19. Input-output energy analysis in dry apricot production of Turkey

    International Nuclear Information System (INIS)

    Esengun, Kemal; Guenduez, Orhan; Erdal, Guelistan

    2007-01-01

    The aims of this study were to determine the amount of input-output energy used in dry apricot production, to investigate the efficiency of energy consumption and to make an economic analysis of dry apricot production in Malatya, Turkey. Data used in this study were obtained from 97 farmers using a face to face questionnaire method. The sample farms were selected through a stratified random sampling technique. The population investigated was divided into two strata based on the size of apricot farms as 0.1-3.0 ha (66 farms) and larger than 3.1 ha (31 farms). The results revealed that 28647.03 MJ ha -1 energy were consumed by the first group and 17884.72 MJ ha -1 by the second group of farmers. The input-output ratio and productivities were 1.24 and 0.24 in the first strata and 1.31 and 0.25 in the second strata, respectively. Results further indicated that in both types of farms, 3/4 of the total energy cost was in non-renewable energy forms, and only 1/4 was in renewable forms. The economic analyses showed that the profit-cost ratios of the farms were 1.11 and 1.19, respectively. Net returns calculated were 414.51 $ ha -1 and 495.59 $ ha -1 in the farms investigated. It was concluded that extension activities are needed to improve the efficiency of energy consumption in dry apricot production and to employ environmentally friendly agricultural management practices and production methods

  20. Input-output relation and energy efficiency in the neuron with different spike threshold dynamics.

    Science.gov (United States)

    Yi, Guo-Sheng; Wang, Jiang; Tsang, Kai-Ming; Wei, Xi-Le; Deng, Bin

    2015-01-01

    Neuron encodes and transmits information through generating sequences of output spikes, which is a high energy-consuming process. The spike is initiated when membrane depolarization reaches a threshold voltage. In many neurons, threshold is dynamic and depends on the rate of membrane depolarization (dV/dt) preceding a spike. Identifying the metabolic energy involved in neural coding and their relationship to threshold dynamic is critical to understanding neuronal function and evolution. Here, we use a modified Morris-Lecar model to investigate neuronal input-output property and energy efficiency associated with different spike threshold dynamics. We find that the neurons with dynamic threshold sensitive to dV/dt generate discontinuous frequency-current curve and type II phase response curve (PRC) through Hopf bifurcation, and weak noise could prohibit spiking when bifurcation just occurs. The threshold that is insensitive to dV/dt, instead, results in a continuous frequency-current curve, a type I PRC and a saddle-node on invariant circle bifurcation, and simultaneously weak noise cannot inhibit spiking. It is also shown that the bifurcation, frequency-current curve and PRC type associated with different threshold dynamics arise from the distinct subthreshold interactions of membrane currents. Further, we observe that the energy consumption of the neuron is related to its firing characteristics. The depolarization of spike threshold improves neuronal energy efficiency by reducing the overlap of Na(+) and K(+) currents during an action potential. The high energy efficiency is achieved at more depolarized spike threshold and high stimulus current. These results provide a fundamental biophysical connection that links spike threshold dynamics, input-output relation, energetics and spike initiation, which could contribute to uncover neural encoding mechanism.

  1. The change of CO2 emission on manufacturing sectors in Indonesia: An input-output analysis

    Science.gov (United States)

    Putranti, Titi Muswati; Imansyah, Muhammad Handry

    2017-12-01

    The objective of this paper is to evaluate the change of CO2 emission on manufacturing sectors in Indonesia using input-output analysis. The method used supply perspective can measure the impact of an increase in the value added of different productive on manufacturing sectors on total CO2 emission and can identify the productive sectors responsible for the increase in CO2 emission when there is an increase in the value added of the economy. The data used are based on Input-Output Energy Table 1990, 1995 and 2010. The method applied the elasticity of CO2 emission to value added. Using the elasticity approach, one can identify the highest elasticity on manufacturing sector as the change of value added provides high response to CO2 emission. Therefore, policy maker can concentrate on manufacturing sectors with the high response of CO2 emission due to the increase of value added. The approach shows the contribution of the various sectors that deserve more consideration for mitigation policy. Five of highest elasticity of manufacturing sectors of CO2 emission are Spinning & Weaving, Other foods, Tobacco, Wearing apparel, and other fabricated textiles products in 1990. Meanwhile, the most sensitive sectors Petroleum refinery products, Other chemical products, Timber & Wooden Products, Iron & Steel Products and Other non-metallic mineral products in 1995. Two sectors of the 1990 were still in the big ten, i.e. Spinning & weaving and Other foods in 1995 for the most sensitive sectors. The six sectors of 1995 in the ten highest elasticity of CO2 emission on manufacturing which were Plastic products, Other chemical products,Other fabricated metal products, Cement, Iron & steel products, Iron & steel, still existed in 2010 condition. The result of this research shows that there is a change in the most elastic CO2 emission of manufacturing sectors which tends from simple and light manufacturing to be a more complex and heavier manufacturing. Consequently, CO2 emission jumped

  2. WORKBENCH FOR CONTROL SYSTEMS TRIALS BASED ON VIPA 300 CONTROLLER AND ADVANTECH INPUT/OUTPUT CARD

    Directory of Open Access Journals (Sweden)

    M. V. Levinskyi

    2015-01-01

    Full Text Available The topic is about workbench creation for control systems trials based on VIPA 300 industrial PLC and model of control object which is implemented in MatLab Simulink program on PC. Connection between controller and the PC is provided by the Advantech PCI-1711 input/output card of discrete and analog signals. Object identification,control system synthesis, creation of control device structure and its parametrical identification, as a rule, is done on a PC in a modelling environment, e.g. in MatLab. But often, using this PC modelling, the hardware and software features of algorithms which were obtained during system synthesis are not considered in a specific industrial PLC.It is considered a good idea to use a composite version where obtained algorithms are tested in a real industrial PLC and control object is substituted by a model which is working on a PC in real time scale. In this case software realization of algorithms in a specific PLC are fully taken into account and substitution of real control object by itsmodel considerably reduces the costs for carrying out experiments and allows to study the system behavior when control object parameters and modes of operation vary greatly. The creation of workbench stipulates several stages: configuration and programming of industrial PLC VIPA 313 SC, installation and configuration of Advantech PCI- 1711 input/output card, tuning of Simulink modelling environment for working in real time scale using Real-Time Windows Target Library, testing of workbench by using constant and harmonic signals of different frequencies. Work results of virtual stabilization system are compared with combined version. In virtual stabilization system PID governor and control object are implemented in Simulink. In combined version control object is still implemented in Simulink and PID governor - in VIPA 313 SC controller (using functional block FB58 from Step7 standard library.

  3. Enhancing e-waste estimates: improving data quality by multivariate Input-Output Analysis.

    Science.gov (United States)

    Wang, Feng; Huisman, Jaco; Stevels, Ab; Baldé, Cornelis Peter

    2013-11-01

    Waste electrical and electronic equipment (or e-waste) is one of the fastest growing waste streams, which encompasses a wide and increasing spectrum of products. Accurate estimation of e-waste generation is difficult, mainly due to lack of high quality data referred to market and socio-economic dynamics. This paper addresses how to enhance e-waste estimates by providing techniques to increase data quality. An advanced, flexible and multivariate Input-Output Analysis (IOA) method is proposed. It links all three pillars in IOA (product sales, stock and lifespan profiles) to construct mathematical relationships between various data points. By applying this method, the data consolidation steps can generate more accurate time-series datasets from available data pool. This can consequently increase the reliability of e-waste estimates compared to the approach without data processing. A case study in the Netherlands is used to apply the advanced IOA model. As a result, for the first time ever, complete datasets of all three variables for estimating all types of e-waste have been obtained. The result of this study also demonstrates significant disparity between various estimation models, arising from the use of data under different conditions. It shows the importance of applying multivariate approach and multiple sources to improve data quality for modelling, specifically using appropriate time-varying lifespan parameters. Following the case study, a roadmap with a procedural guideline is provided to enhance e-waste estimation studies. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Industrial output restriction and the Kyoto protocol. An input-output approach with application to Canada

    Energy Technology Data Exchange (ETDEWEB)

    Lixon, Benoit [A.D.E Consulting Services, Rue de Clairvaux, 40/101, 1348 Louvain-La-Neuve (Belgium); Thomassin, Paul J. [Department of Agricultural Economics, McGill University, Montreal (Canada); Hamaide, Bertrand [Faculty of Economics, Social and Political Sciences, Facultes Universitaires Saint-Louis, 43 boulevard du jardin botanique, 1000 Brussels (Belgium)

    2008-12-01

    The objective of this paper is to assess the economic impacts of reducing greenhouse gas emissions by decreasing industrial output in Canada to a level that will meet the target set out in the Kyoto Protocol. The study uses an ecological-economic Input-Output model combining economic components valued in monetary terms with ecologic components - GHG emissions - expressed in physical terms. Economic and greenhouse gas emissions data for Canada are computed in the same sectoral disaggregation. Three policy scenarios are considered: the first one uses the direct emission coefficients to allocate the reduction in industrial output, while the other two use the direct plus indirect emission coefficients. In the first two scenarios, the reduction in industrial sector output is allocated uniformly across sectors while it is allocated to the 12 largest emitting industries in the last one. The estimated impacts indicate that the results vary with the different allocation methods. The third policy scenario, allocation to the 12 largest emitting sectors, is the most cost effective of the three as the impacts of the Kyoto Protocol reduces Gross Domestic Product by 3.1% compared to 24% and 8.1% in the first two scenarios. Computed economic costs should be considered as upper-bounds because the model assumes immediate adjustment to the Kyoto Protocol and because flexibility mechanisms are not incorporated. The resulting upper-bound impact of the third scenario may seem to contradict those who claim that the Kyoto Protocol would place an unbearable burden on the Canadian economy. (author)

  5. DAMPAK SUB-SEKTOR UNGGULAN TERHADAP PEREKONOMIAN KOTA SAMARINDA: PENDEKATAN INPUT-OUTPUT

    Directory of Open Access Journals (Sweden)

    Jerry Pahlevy Mahakam

    2015-01-01

    Full Text Available In this paper, the writer would like to investigate the sub-sectors of the economy categorized as superior, potential, and non-superior, determine the magnitude of multiplier income arising from these sub-sector on household income and job opportunities, and identify the sub-sector of the economy which can be placed as a superior in Samarinda. This study employed Input-Output approach which later discovered several factors which were considered as superior, namely food and beverage industry; Paper and printing industry; electricity; construction / building; land transportation; and other services, while the sub-sectors which were included in non-superior categories were rice, cassava, vegetables, fruits, other staple food crops, plantation crops, timber and forest products, fisheries, mining, timber industry, chemical industry, hotels, telecommunications, insurance, government, education services. In addition, the results of forward and backward linkages analysis and multiplier income calculating of household income and job opportunities found that those sub-sectors of food and beverage industry, building/ construction, other services, and land transportation were categorized into major sub-sectors.

  6. Accounting for the biogeochemical cycle of nitrogen in input-output life cycle assessment.

    Science.gov (United States)

    Singh, Shweta; Bakshi, Bhavik R

    2013-08-20

    Nitrogen is indispensable for sustaining human activities through its role in the production of food, animal feed, and synthetic chemicals. This has encouraged significant anthropogenic mobilization of reactive nitrogen and its emissions into the environment resulting in severe disruption of the nitrogen cycle. This paper incorporates the biogeochemical cycle of nitrogen into the 2002 input-output model of the U.S. economy. Due to the complexity of this cycle, this work proposes a unique classification of nitrogen flows to facilitate understanding of the interaction between economic activities and various flows in the nitrogen cycle. The classification scheme distinguishes between the mobilization of inert nitrogen into its reactive form, use of nitrogen in various products, and nitrogen losses to the environment. The resulting inventory and model of the US economy can help quantify the direct and indirect impacts or dependence of economic sectors on the nitrogen cycle. This paper emphasizes the need for methods to manage the N cycle that focus not just on N losses, which has been the norm until now, but also include other N flows for a more comprehensive view and balanced decisions. Insight into the N profile of various sectors of the 2002 U.S. economy is presented, and the inventory can also be used for LCA or Hybrid LCA of various products. The resulting model is incorporated in the approach of Ecologically-Based LCA and available online.

  7. Ecological input-output modeling for embodied resources and emissions in Chinese economy 2005

    Science.gov (United States)

    Chen, Z. M.; Chen, G. Q.; Zhou, J. B.; Jiang, M. M.; Chen, B.

    2010-07-01

    For the embodiment of natural resources and environmental emissions in Chinese economy 2005, a biophysical balance modeling is carried out based on an extension of the economic input-output table into an ecological one integrating the economy with its various environmental driving forces. Included resource flows into the primary resource sectors and environmental emission flows from the primary emission sectors belong to seven categories as energy resources in terms of fossil fuels, hydropower and nuclear energy, biomass, and other sources; freshwater resources; greenhouse gas emissions in terms of CO2, CH4, and N2O; industrial wastes in terms of waste water, waste gas, and waste solid; exergy in terms of fossil fuel resources, biological resources, mineral resources, and environmental resources; solar emergy and cosmic emergy in terms of climate resources, soil, fossil fuels, and minerals. The resulted database for embodiment intensity and sectoral embodiment of natural resources and environmental emissions is of essential implications in context of systems ecology and ecological economics in general and of global climate change in particular.

  8. Modeling imbalanced economic recovery following a natural disaster using input-output analysis.

    Science.gov (United States)

    Li, Jun; Crawford-Brown, Douglas; Syddall, Mark; Guan, Dabo

    2013-10-01

    Input-output analysis is frequently used in studies of large-scale weather-related (e.g., Hurricanes and flooding) disruption of a regional economy. The economy after a sudden catastrophe shows a multitude of imbalances with respect to demand and production and may take months or years to recover. However, there is no consensus about how the economy recovers. This article presents a theoretical route map for imbalanced economic recovery called dynamic inequalities. Subsequently, it is applied to a hypothetical postdisaster economic scenario of flooding in London around the year 2020 to assess the influence of future shocks to a regional economy and suggest adaptation measures. Economic projections are produced by a macro econometric model and used as baseline conditions. The results suggest that London's economy would recover over approximately 70 months by applying a proportional rationing scheme under the assumption of initial 50% labor loss (with full recovery in six months), 40% initial loss to service sectors, and 10-30% initial loss to other sectors. The results also suggest that imbalance will be the norm during the postdisaster period of economic recovery even though balance may occur temporarily. Model sensitivity analysis suggests that a proportional rationing scheme may be an effective strategy to apply during postdisaster economic reconstruction, and that policies in transportation recovery and in health care are essential for effective postdisaster economic recovery. © 2013 Society for Risk Analysis.

  9. Optimizing production with energy and GHG emission constraints in Greece: An input-output analysis

    International Nuclear Information System (INIS)

    Hristu-Varsakelis, D.; Karagianni, S.; Pempetzoglou, M.; Sfetsos, A.

    2010-01-01

    Under its Kyoto and EU obligations, Greece has committed to a greenhouse gas (GHG) emissions increase of at most 25% compared to 1990 levels, to be achieved during the period 2008-2012. Although this restriction was initially regarded as being realistic, information derived from GHG emissions inventories shows that an increase of approximately 28% has already taken place between 1990 and 2005, highlighting the need for immediate action. This paper explores the reallocation of production in Greece, on a sector-by-sector basis, in order to meet overall demand constraints and GHG emissions targets. We pose a constrained optimization problem, taking into account the Greek environmental input-output matrix for 2005, the amount of utilized energy and pollution reduction options. We examine two scenarios, limiting fluctuations in sectoral production to at most 10% and 15%, respectively, compared to baseline (2005) values. Our results indicate that (i) GHG emissions can be reduced significantly with relatively limited effects on GVP growth rates, and that (ii) greater cutbacks in GHG emissions can be achieved as more flexible production scenarios are allowed.

  10. Integrating input output analysis with risk assessment to evaluate the population risk of arsenic.

    Science.gov (United States)

    Ma, Hwong-Wen; Shih, Hsiu-Ching; Hung, Ming-Lung; Chao, Chia-Wei; Li, Pei-Chiun

    2012-01-17

    Multimedia and site-specific risk assessments (RA) of major sources releasing arsenic (As) were converted into sector-based risk coefficients, which were integrated with the Input Output Table (IO) to analyze the association between sector activities and health risks. The developed IO-RA framework is a valuable tool for unfolding the risk chain linking the receptors, exposure pathways, emission sources, and production and consumption activities associated with various industrial sectors. The enlarged decision space along the chain can then be considered in planning risk management strategies. This case study estimates that air emissions of As result in 1.54 carcinogenic cases. Export is the primary driving force and accounts for approximately 48% of the final demand that leads to population risks of As. The ranking of the contribution of the five sectors in terms of total population risks is as follows: electricity supply (1.06E+00), steelmaking (2.2 × 10(-1)), cement kilns (1.50 × 10(-1)), semiconductor manufacturing (6.34 × 10(-2)) and incinerators (4.31 × 10(-2)). The electricity supply, steelmaking industry, and cement kilns are the major sectors, not only because their emissions directly cause risk but also because they have a stronger influence on the risk generated by other sectors.

  11. Technological change in energy systems. Learning curves, logistic curves and input-output coefficients

    International Nuclear Information System (INIS)

    Pan, Haoran; Koehler, Jonathan

    2007-01-01

    Learning curves have recently been widely adopted in climate-economy models to incorporate endogenous change of energy technologies, replacing the conventional assumption of an autonomous energy efficiency improvement. However, there has been little consideration of the credibility of the learning curve. The current trend that many important energy and climate change policy analyses rely on the learning curve means that it is of great importance to critically examine the basis for learning curves. Here, we analyse the use of learning curves in energy technology, usually implemented as a simple power function. We find that the learning curve cannot separate the effects of price and technological change, cannot reflect continuous and qualitative change of both conventional and emerging energy technologies, cannot help to determine the time paths of technological investment, and misses the central role of R and D activity in driving technological change. We argue that a logistic curve of improving performance modified to include R and D activity as a driving variable can better describe the cost reductions in energy technologies. Furthermore, we demonstrate that the top-down Leontief technology can incorporate the bottom-up technologies that improve along either the learning curve or the logistic curve, through changing input-output coefficients. An application to UK wind power illustrates that the logistic curve fits the observed data better and implies greater potential for cost reduction than the learning curve does. (author)

  12. Neural Systems with Numerically Matched Input-Output Statistic: Isotonic Bivariate Statistical Modeling

    Directory of Open Access Journals (Sweden)

    Simone Fiori

    2007-07-01

    Full Text Available Bivariate statistical modeling from incomplete data is a useful statistical tool that allows to discover the model underlying two data sets when the data in the two sets do not correspond in size nor in ordering. Such situation may occur when the sizes of the two data sets do not match (i.e., there are “holes” in the data or when the data sets have been acquired independently. Also, statistical modeling is useful when the amount of available data is enough to show relevant statistical features of the phenomenon underlying the data. We propose to tackle the problem of statistical modeling via a neural (nonlinear system that is able to match its input-output statistic to the statistic of the available data sets. A key point of the new implementation proposed here is that it is based on look-up-table (LUT neural systems, which guarantee a computationally advantageous way of implementing neural systems. A number of numerical experiments, performed on both synthetic and real-world data sets, illustrate the features of the proposed modeling procedure.

  13. Three-scale input-output modeling for urban economy: Carbon emission by Beijing 2007

    Science.gov (United States)

    Chen, G. Q.; Guo, Shan; Shao, Ling; Li, J. S.; Chen, Zhan-Ming

    2013-09-01

    For urban economies, an ecological endowment embodiment analysis has to be supported by endowment intensities at both the international and domestic scales to reflect the international and domestic imports of increasing importance. A three-scale input-output modeling for an urban economy to give nine categories of embodiment fluxes is presented in this paper by a case study on the carbon dioxide emissions by the Beijing economy in 2007, based on the carbon intensities for the average world and national economies. The total direct emissions are estimated at 1.03E+08 t, in which 91.61% is energy-related emissions. By the modeling, emissions embodied in fixed capital formation amount to 7.20E+07 t, emissions embodied in household consumption are 1.58 times those in government consumption, and emissions in gross capital formation are 14.93% more than those in gross consumption. As a net exporter of carbon emissions, Beijing exports 5.21E+08 t carbon embodied in foreign imported commodities and 1.06E+08 t in domestic imported commodities, while emissions embodied in foreign and domestic imported commodities are 3.34E+07 and 1.75E+08 t respectively. The algorithm presented in this study is applicable to the embodiment analysis of other environmental resources for regional economies characteristic of multi-scales.

  14. Impact of the Sugar Import Reduction on Iran Economic Value Added (Input- Output Approach

    Directory of Open Access Journals (Sweden)

    Fateme Hayatgheibi

    2014-06-01

    Full Text Available The present study aimed at understanding interactions and linkages between the sugar sector with other economic sectors, and the influence of sugar import reduction on the economic value added. To achieve the purpose, the Input-Output table of Iran for the year 2006, Leontief inverse matrix and hypothetical extraction method were used. Based on the results, sugar industry has the most forward linkages with “Manufacture of food products and beverages,…”, “husbandry, aviculture,…”, “cultivation, horticulture”, “bakery products” and “restaurants”. This sector has also strong backward linkages with “cultivation, horticulture”, “chemicals and chemical products”, “other services”, “transport and telecommunication” and “financial services, insurance and bank”. Furthermore, either one unit increase in the final demand of sugar or one unit decrease in the sugar import increases the output of whole economic, agricultural and fishing, industry and mining, and services sectors by 2.3060, 0.6019, 1.4331, and 0.2710 unit, respectively. The increasing coefficients of the value added for the above sectors are 0.4308, 0.3700, and 0.1992 unit, respectively.

  15. Characterizing the Input-Output Function of the Olfactory-Limbic Pathway in the Guinea Pig

    Directory of Open Access Journals (Sweden)

    Gian Luca Breschi

    2015-01-01

    Full Text Available Nowadays the neuroscientific community is taking more and more advantage of the continuous interaction between engineers and computational neuroscientists in order to develop neuroprostheses aimed at replacing damaged brain areas with artificial devices. To this end, a technological effort is required to develop neural network models which can be fed with the recorded electrophysiological patterns to yield the correct brain stimulation to recover the desired functions. In this paper we present a machine learning approach to derive the input-output function of the olfactory-limbic pathway in the in vitro whole brain of guinea pig, less complex and more controllable than an in vivo system. We first experimentally characterized the neuronal pathway by delivering different sets of electrical stimuli from the lateral olfactory tract (LOT and by recording the corresponding responses in the lateral entorhinal cortex (l-ERC. As a second step, we used information theory to evaluate how much information output features carry about the input. Finally we used the acquired data to learn the LOT-l-ERC “I/O function,” by means of the kernel regularized least squares method, able to predict l-ERC responses on the basis of LOT stimulation features. Our modeling approach can be further exploited for brain prostheses applications.

  16. Analysis of the South African input-output table to determine sector specific economic impacts: A study on real estate

    Directory of Open Access Journals (Sweden)

    Douw Gert Brand Boshoff

    2016-11-01

    Full Text Available Input-output analysis is a well known method of analysing specific economic activity and the influence of different sectors on the economy and on one another. This study investigates the ability of input-output analysis to consider the importance of commercial real estate on the economy. It analyses the economic activity, contribution to GDP, employment created and taxes generated with reference to direct, indirect and induced impacts. The research shows the contribution of the specific sector on the economy and highlights the ability of input-output analysis to determine the impact of different types of property and locational analysis. The interaction of property with the economy is discussed, which also enables the use of the analysis reported here for short term future forecasting, whereby expected real estate activity is used to forecast the direct, indirect and induced effects on the economy.

  17. Greenhouse gas footprinting for small businesses - The use of input-output data

    International Nuclear Information System (INIS)

    Berners-Lee, M.; Howard, D.C.; Moss, J.; Kaivanto, K.; Scott, W.A.

    2011-01-01

    To mitigate anthropogenic climate change greenhouse gas emissions (GHG) must be reduced; their major source is man's use of energy. A key way to manage emissions is for the energy consumer to understand their impact and the consequences of changing their activities. This paper addresses the challenge of delivering relevant, practical and reliable greenhouse gas 'footprint' information for small and medium sized businesses. The tool we describe is capable of ascribing parts of the total footprint to specific actions to which the business can relate and is sensitive enough to reflect the consequences of change. It provides a comprehensive description of all emissions for each business and sets them in the context of local, national and global statistics. It includes the GHG costs of all goods and services irrespective of their origin and without double accounting. We describe the development and use of the tool, which draws upon both national input-output data and process-based life cycle analysis techniques; a hybrid model. The use of national data sets the output in context and makes the results consistent with national and global targets, while the life cycle techniques provide a means of reflecting the dynamics of actions. The model is described in some detail along with a rationale and a short discussion of validity. As the tool is designed for small commercial users, we have taken care to combine rigour with practicality; parameterising from readily available client data whilst being clear about uncertainties. As an additional incentive, we also report on the potential costs or savings of switching activities. For users to benefit from the tool, they need to understand the output and know how much confidence they should place in the results. We not only describe an application of non-parametric statistics to generate confidence intervals, but also offer users the option of and guidance on adjusting figures to examine the sensitivity of the model to its

  18. Modeling DPOAE input/output function compression: comparisons with hearing thresholds.

    Science.gov (United States)

    Bhagat, Shaum P

    2014-09-01

    Basilar membrane input/output (I/O) functions in mammalian animal models are characterized by linear and compressed segments when measured near the location corresponding to the characteristic frequency. A method of studying basilar membrane compression indirectly in humans involves measuring distortion-product otoacoustic emission (DPOAE) I/O functions. Previous research has linked compression estimates from behavioral growth-of-masking functions to hearing thresholds. The aim of this study was to compare compression estimates from DPOAE I/O functions and hearing thresholds at 1 and 2 kHz. A prospective correlational research design was performed. The relationship between DPOAE I/O function compression estimates and hearing thresholds was evaluated with Pearson product-moment correlations. Normal-hearing adults (n = 16) aged 22-42 yr were recruited. DPOAE I/O functions (L₂ = 45-70 dB SPL) and two-interval forced-choice hearing thresholds were measured in normal-hearing adults. A three-segment linear regression model applied to DPOAE I/O functions supplied estimates of compression thresholds, defined as breakpoints between linear and compressed segments and the slopes of the compressed segments. Pearson product-moment correlations between DPOAE compression estimates and hearing thresholds were evaluated. A high correlation between DPOAE compression thresholds and hearing thresholds was observed at 2 kHz, but not at 1 kHz. Compression slopes also correlated highly with hearing thresholds only at 2 kHz. The derivation of cochlear compression estimates from DPOAE I/O functions provides a means to characterize basilar membrane mechanics in humans and elucidates the role of compression in tone detection in the 1-2 kHz frequency range. American Academy of Audiology.

  19. Economics of alcohol-involved traffic crashes in the USA: an input-output analysis.

    Science.gov (United States)

    Zaloshnja, Eduard; Miller, Ted R; Lawrence, Bruce A

    2016-02-01

    Preventing traffic crashes reduces crash costs paid by employers and employees. The related savings filter through the economy, impacting its performance. This study is the first to measure the impact of traffic crash reduction on a national economy. It focuses on impaired driving crashes. We analysed the impact of the almost 50% alcohol-involved driving crash rate reduction from 1984-1986 to 2010 and the impact if such crashes in 2010 had not occurred. The analysis entered published estimates of costs that employers, consumers and governments paid because of US impaired-driving crashes as production costs and demand changes in Rutgers University's input-output model of the US economy. For example, reducing medical costs paid by employers lowers the cost of labour inputs to production while reducing vehicle repairs raises demand for other goods. Running the model at current and alternative crash rates revealed the impacts of crash reductions on economic output, gross domestic product (GDP), national income and employment. Alcohol-involved crash reductions since 1984-1986 increased economic output in 2010 by an estimated $20 billion, raised GDP by $10 billion, increased US income by $6.5 billion, and created 215 000 jobs. GDP gains from alcohol-involved crash reduction contributed 5% of the $200 million compounded average annual growth in US GDP from 1985 to 2013. Eliminating remaining alcohol-involved crashes would result in similar economic gains. Alcohol-involved crashes drag down the US economy. On average, each of the 25.5 billion miles Americans drove impaired in 2010 reduced economic output by $0.80. Those losses are preventable. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  20. Compiling and using input-output frameworks through collaborative virtual laboratories.

    Science.gov (United States)

    Lenzen, Manfred; Geschke, Arne; Wiedmann, Thomas; Lane, Joe; Anderson, Neal; Baynes, Timothy; Boland, John; Daniels, Peter; Dey, Christopher; Fry, Jacob; Hadjikakou, Michalis; Kenway, Steven; Malik, Arunima; Moran, Daniel; Murray, Joy; Nettleton, Stuart; Poruschi, Lavinia; Reynolds, Christian; Rowley, Hazel; Ugon, Julien; Webb, Dean; West, James

    2014-07-01

    Compiling, deploying and utilising large-scale databases that integrate environmental and economic data have traditionally been labour- and cost-intensive processes, hindered by the large amount of disparate and misaligned data that must be collected and harmonised. The Australian Industrial Ecology Virtual Laboratory (IELab) is a novel, collaborative approach to compiling large-scale environmentally extended multi-region input-output (MRIO) models. The utility of the IELab product is greatly enhanced by avoiding the need to lock in an MRIO structure at the time the MRIO system is developed. The IELab advances the idea of the "mother-daughter" construction principle, whereby a regionally and sectorally very detailed "mother" table is set up, from which "daughter" tables are derived to suit specific research questions. By introducing a third tier - the "root classification" - IELab users are able to define their own mother-MRIO configuration, at no additional cost in terms of data handling. Customised mother-MRIOs can then be built, which maximise disaggregation in aspects that are useful to a family of research questions. The second innovation in the IELab system is to provide a highly automated collaborative research platform in a cloud-computing environment, greatly expediting workflows and making these computational benefits accessible to all users. Combining these two aspects realises many benefits. The collaborative nature of the IELab development project allows significant savings in resources. Timely deployment is possible by coupling automation procedures with the comprehensive input from multiple teams. User-defined MRIO tables, coupled with high performance computing, mean that MRIO analysis will be useful and accessible for a great many more research applications than would otherwise be possible. By ensuring that a common set of analytical tools such as for hybrid life-cycle assessment is adopted, the IELab will facilitate the harmonisation of fragmented

  1. The Measurement of X-ray Fluoroscopy Input-output Characteristics in Angiography System.

    Science.gov (United States)

    Hagihara, Yoshiaki; Umehara, Takayoshi; Matsumoto, Kazuma; Fujita, Tomoko; Ikeuchi, Youko; Fujikawa, Keita; Takahashi, Yoshiyuki; Kotoura, Noriko

    2017-01-01

    Determination of X-ray fluoroscopy radiation dose and contrast with angiographic system automatically depending on the objects, and to control setting manually, which is difficult for the measurement of characteristics. Therefore, we examined the method to adjust the conditions of fluoroscopy and measured the input-output characteristics. To adjust and fix the condition of fluoroscopy, the exposure adjustment area at the center of the irradiation field was moved to the left side and attached the copper plates to regulate the exposure dose. The area to measure the digital value was selected at the center of the irradiation field, and the dosimeter was placed at the right side of the area, which was selected to measure the digital value. To regulate the entrance dose progressively, the acryl plates were inserted into the irradiation field except for the exposure adjustment area. We obtained a characteristic curve from the measured dose and the digital value. Difference of lookup table (LUT), dose dependency, and tube voltage dependency were checked by the digital characteristic curves. Each LUT showed different curves, but they all saturated with 4095, which is the maximum value of 12 bits. Dose dependency was measured as an increase in the permitted dose level with an increase in the setting dose. Tube voltage dependency improved with the tube voltage rises. Each characteristic curve became same by converting the relative exposure dose. As a result, measuring the shape of LUT would be possible. The method is useful for measuring the characteristic curve with the X-ray fluoroscopy of angiographic system.

  2. Active structural acoustic control of helicopter interior multifrequency noise using input-output-based hybrid control

    Science.gov (United States)

    Ma, Xunjun; Lu, Yang; Wang, Fengjiao

    2017-09-01

    This paper presents the recent advances in reduction of multifrequency noise inside helicopter cabin using an active structural acoustic control system, which is based on active gearbox struts technical approach. To attenuate the multifrequency gearbox vibrations and resulting noise, a new scheme of discrete model predictive sliding mode control has been proposed based on controlled auto-regressive moving average model. Its implementation only needs input/output data, hence a broader frequency range of controlled system is modelled and the burden on the state observer design is released. Furthermore, a new iteration form of the algorithm is designed, improving the developing efficiency and run speed. To verify the algorithm's effectiveness and self-adaptability, experiments of real-time active control are performed on a newly developed helicopter model system. The helicopter model can generate gear meshing vibration/noise similar to a real helicopter with specially designed gearbox and active struts. The algorithm's control abilities are sufficiently checked by single-input single-output and multiple-input multiple-output experiments via different feedback strategies progressively: (1) control gear meshing noise through attenuating vibrations at the key points on the transmission path, (2) directly control the gear meshing noise in the cabin using the actuators. Results confirm that the active control system is practical for cancelling multifrequency helicopter interior noise, which also weakens the frequency-modulation of the tones. For many cases, the attenuations of the measured noise exceed the level of 15 dB, with maximum reduction reaching 31 dB. Also, the control process is demonstrated to be smoother and faster.

  3. ANALISIS PERANAN DAN DAMPAK INVESTASI INFRASTRUKTUR TERHADAP PEREKONOMIAN INDONESIA: ANALISIS INPUT-OUTPUT

    Directory of Open Access Journals (Sweden)

    Chandra Darma Permana

    2011-08-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Despite being recovered from economic crisis, the infrastructure development in Indonesia still hasn’t shown a significant improvement. It is reflected from the diminishing government allocation for infrastructure as a percentage of Gross Domestic Products. The main objective of the study is to analyze the role of infrastructure through the linkage analysis, dispersion effect analysis, multiplier effect analysis, and the investment effect analysis. The scope of infrastructure is only referred to electricity, gas and water, and construction sector. The data used for this study is the 2005 Indonesian Input-Output Table. The result of the study has shown that infrastructure has a higher backward linkage than its forward. In addition, all of the infrastructure sectors has shown more than one dispersion coefficient and conversely has revealed less than one value for the dispersion sensitivity. Which means that infrastructure had a better capability to support the development of its upstream sectors than its downstream. Infrastructure has a positive multiplier effect toward the other sectors. The growth of the investment in the electricity, gas and water sector has given the biggest effect toward the change of the total outpu, while the water sector has given the biggest effect toward the change in the total income,  and road, bridge and port sector has given the biggest effect toward the change in the total labour.

  4. Economic and Environmental Impacts of Dietary Changes in Iran: An Input-Output Analysis

    Directory of Open Access Journals (Sweden)

    Roham Rahmani

    2012-03-01

    Full Text Available  Iran's simple and environmentally extended commodity by commodity input-output (IO model was used to determine the impacts of dietary changes on the Iranian economy and on the environmental load. The original model is based on the status-quo diet and was modified to include the World Health Organization (WHO, the World Cancer Research Fund (WCRF and Mediterranean alternative dietary scenarios. A range of impacts occurred depending upon the relative changes in food items. The direction of changes was similar in the three alternative scenarios. The greatest and smallest impact occurred in the WHO and the Mediterranean scenarios respectively. Total changes in output in WHO, WCRF and Mediterranean dietary scenarios were calculated to be 7010.1, 4802.8 and 3330.8 billion Rials respectively. The outputs of rice, vegetables, fruit, bread and macaroni decreased, but those of live and other animal products increased. The output of non-food commodities and services increased as well. The environmental load increased for three dietary scenarios in comparison with the status-quo diet. The greatest and smallest environmental load occurred in WHO and Mediterranean dietary scenarios respectively. Thus, although dietary changes can have positive effects on economic output, in order to avoid negative environmental effects, it is necessary to consider strategies such as applying capabilities, particularly natural resources in an optimal healthy and environmentally diet, planning for improving forest covering and green space simultaneously with increasing economic activities and using indirect incentives, such as taxes and insurance, for promoting sustainable and healthy foods and reducing greenhouse gas emissions.

  5. Syringe-Injectable Electronics with a Plug-and-Play Input/Output Interface.

    Science.gov (United States)

    Schuhmann, Thomas G; Yao, Jun; Hong, Guosong; Fu, Tian-Ming; Lieber, Charles M

    2017-09-13

    Syringe-injectable mesh electronics represent a new paradigm for brain science and neural prosthetics by virtue of the stable seamless integration of the electronics with neural tissues, a consequence of the macroporous mesh electronics structure with all size features similar to or less than individual neurons and tissue-like flexibility. These same properties, however, make input/output (I/O) connection to measurement electronics challenging, and work to-date has required methods that could be difficult to implement by the life sciences community. Here we present a new syringe-injectable mesh electronics design with plug-and-play I/O interfacing that is rapid, scalable, and user-friendly to nonexperts. The basic design tapers the ultraflexible mesh electronics to a narrow stem that routes all of the device/electrode interconnects to I/O pads that are inserted into a standard zero insertion force (ZIF) connector. Studies show that the entire plug-and-play mesh electronics can be delivered through capillary needles with precise targeting using microliter-scale injection volumes similar to the standard mesh electronics design. Electrical characterization of mesh electronics containing platinum (Pt) electrodes and silicon (Si) nanowire field-effect transistors (NW-FETs) demonstrates the ability to interface arbitrary devices with a contact resistance of only 3 Ω. Finally, in vivo injection into mice required only minutes for I/O connection and yielded expected local field potential (LFP) recordings from a compact head-stage compatible with chronic studies. Our results substantially lower barriers for use by new investigators and open the door for increasingly sophisticated and multifunctional mesh electronics designs for both basic and translational studies.

  6. Functional identification of the input-output transforms of mammalian motoneurones.

    Science.gov (United States)

    Binder, M D; Poliakov, A V; Powers, R K

    1999-01-01

    transform could be predicted from the mean firing rate and the linear impulse response, yielding a relatively simple, general description of the motoneurone's input-output function.

  7. Energy input-output analysis of rice cultivation in the coastal region of Bangladesh

    Directory of Open Access Journals (Sweden)

    Masudur Rahman

    2015-08-01

    Full Text Available An analysis of energy input-output in boro rice cultivation was undertaken for well recognized salinity classes (S1 -S5 and farm categories (landless, marginal, small, medium, and large in south-west coastal Bangladesh. A total of 125 target farmers were surveyed by using structured questionnaire during the boro season (January-May 2011. Survey data were converted into energy by using the respective energy co-efficient equivalents. The results revealed that the sequences of total energy input were S1 > S5 > S2 > S4 > S3 and medium > large > landless > small > marginal among salinity regimes and farm categories, respectively. The seedbed stage consumed the highest energy followed by growing stage, and harvesting and threshing. Inorganic fertilizers accounted for a major share (59.98% of energy input in rice field, while the lowest share was estimated for manpower (0.75%. Among fertilizers, nitrogen category was the most dominant source (54.94% of energy input following phosphate (3.82% and potassium (1.22%. The total output energy was in the sequences of S1 > S4 > S5 > S2 >S3 and landless > marginal > small > medium > large. Energy from main product (rice grains was higher than that of byproduct (straw. The study also found that total output energy decreases with increases in farm size. In case of energy efficiency (output-input ratio, S4 was found to be the most energy efficient (2.43 regime followed by S3, S1, S5 and S2, whereas marginal sized farmers were the most energy efficient (2.12 followed by landless, small, medium and large. This study shows that increased energy input in rice cultivation is not always necessary to get higher output energy in the salinity affected coastal Bangladesh. Therefore, it is necessary to practice environmentally sound management systems for sustainable rice production.

  8. Computer-Mediated Input, Output and Feedback in the Development of L2 Word Recognition from Speech

    Science.gov (United States)

    Matthews, Joshua; Cheng, Junyu; O'Toole, John Mitchell

    2015-01-01

    This paper reports on the impact of computer-mediated input, output and feedback on the development of second language (L2) word recognition from speech (WRS). A quasi-experimental pre-test/treatment/post-test research design was used involving three intact tertiary level English as a Second Language (ESL) classes. Classes were either assigned to…

  9. EXIOBASE 3: Developing a Time Series of Detailed Environmentally Extended Multi-Regional Input-Output Tables

    NARCIS (Netherlands)

    Stadler, K.; Wood, R.; Bulavskaya, T.; Södersten, C.J.; Simas, M.; Schmidt, S.; Usubiaga, A.; Acosta-Fernández, J.; Kuenen, J.; Bruckner, M.; Giljum, S.; Lutter, S.; Merciai, S.; Schmidt, J.H.; Theurl, M.C.; Plutzar, C.; Kastner, T.; Eisenmenger, N.; Erb, K.H.; Koning, A. de; Tukker, A.

    2018-01-01

    Environmentally extended multiregional input-output (EE MRIO) tables have emerged as a key framework to provide a comprehensive description of the global economy and analyze its effects on the environment. Of the available EE MRIO databases, EXIOBASE stands out as a database compatible with the

  10. Reconstruction of an Input-Output Table for Germany in 1936 : Conceptual and Empirical-Statistical Problems

    NARCIS (Netherlands)

    Fremdling, Rainer; Staeglin, Reiner

    2012-01-01

    The objective of this contribution is to present the final results of a long-term research project which aimed at constructing an input-output table for Germany in 1936. Our research can be seen as follow-up of the activities of the German Imperial Statistical Office (Statistisches Reichsamt) which

  11. The Comparative Effects of Comprehensible Input, Output and Corrective Feedback on the Receptive Acquisition of L2 Vocabulary Items

    Science.gov (United States)

    Nowbakht, Mohammad; Shahnazari, Mohammadtaghi

    2015-01-01

    In the present study, the comparative effects of comprehensible input, output and corrective feedback on the receptive acquisition of L2 vocabulary items were investigated. Two groups of beginning EFL learners participated in the study. The control group received comprehensible input only, while the experimental group received input and was…

  12. Socio-economic effects of a HYSOL CSP plant located in different countries: An input output analysis

    NARCIS (Netherlands)

    Corona, B.; López, A.; San Miguel, G.

    2016-01-01

    The aim of this paper is to estimate the socioeconomic effects associated with the production of electricity by a CSP plant with HYSOL configuration, using Input Output Analysis. These effects have been estimated in terms of production of Goods and Services (G&S), multiplier effect, value added,

  13. The structures of energy consumption and emissions into air in Finnish economy in 1990. An input-output analysis

    International Nuclear Information System (INIS)

    Maeenpaeae, I.; Tervo, H.

    1994-01-01

    The structures of utilization of primary energy, final consumption of electricity, and the main emissions into the air in Finnish economy in 1990 have been derived in this report on the basis of input-output analysis. By using an input-output model it is possible to calculate what is the productional content of different products, i.e. how much in total, directly or indirectly, work of different fields of production is needed for production of commodities. Energy and emissions into air can be assumed as basic inputs of the production. By using input-output analysis it is possible to follow up how the energy inputs and emissions of different branches are bound into commodity flows of economy. Hence a systematic and expiring figure is obtained of energy and emission contents of different branches. The basic matrix for calculation of primary energy and emission coefficients of different branches are made in the chapter no. 2. The formulae for calculation of the energy and emission contents of commodities are derived from common basic formulae of input-output analysis in the chapter no. 3. The branch-based energy and emission coefficients of commodities are presented in the chapter no. 4. The energies bound into household commodities and emissions into the air are presented in the chapter no. 5. The total presentation of the Finnish national product, the gross national product and the energy and emission contents of the main commodities is made in the chapter no. 6. (11 refs.)

  14. Environmental impacts of consumption in the European Union : High-resolution input-output tables with detailed environmental extensions

    NARCIS (Netherlands)

    Huppes, Gjalt; De Koning, Arjan; Suh, Sangwon; Heijungs, Reinout; Van Oers, Lauran; Nielsen, Per; Guinée, Jeroen B.

    For developing product policy, insight into the environmental effects of products is required. But available life-cycle assessment studies (LCAs) are hardly comparable between different products and do not cover total consumption. Input-output analysis with environmental extensions (EEIOA) of full

  15. Influence of active dendritic currents on input-output processing in spinal motoneurons in vivo.

    Science.gov (United States)

    Lee, R H; Kuo, J J; Jiang, M C; Heckman, C J

    2003-01-01

    The extensive dendritic tree of the adult spinal motoneuron generates a powerful persistent inward current (PIC). We investigated how this dendritic PIC influenced conversion of synaptic input to rhythmic firing. A linearly increasing, predominantly excitatory synaptic input was generated in triceps ankle extensor motoneurons by slow stretch (duration: 2-10 s) of the Achilles tendon in the decerebrate cat preparation. The firing pattern evoked by stretch was measured by injecting a steady current to depolarize the cell to threshold for firing. The effective synaptic current (I(N), the net synaptic current reaching the soma of the cell) evoked by stretch was measured during voltage clamp. Hyperpolarized holding potentials were used to minimize the activation of the dendritic PIC and thus estimate stretch-evoked I(N) for a passive dendritic tree (I(N,PASS)). Depolarized holding potentials that approximated the average membrane potential during rhythmic firing allowed strong activation of the dendritic PIC and thus resulted in marked enhancement of the total stretch-evoked I(N) (I(N,TOT)). The net effect of the dendritic PIC on the generation of rhythmic firing was assessed by plotting stretch-evoked firing (strong PIC activation) versus stretch-evoked I(N,PASS) (minimal PIC activation). The gain of this input-output function for the neuron (I-O(N)) was found to be ~2.7 times as high as for the standard injected frequency current (F-I) function in low-input conductance neurons. However, about halfway through the stretch, firing rate tended to become constant, resulting in a sharp saturation in I-O(N) that was not present in F-I. In addition, the gain of I-O(N) decreased sharply with increasing input conductance, resulting in much lower stretch-evoked firing rates in high-input conductance cells. All three of these phenomena (high initial gain, saturation, and differences in low- and high-input conductance cells) were also readily apparent in the differences between

  16. Functional identification of the input-output transforms of motoneurones in the rat and cat.

    Science.gov (United States)

    Poliakov, A V; Powers, R K; Binder, M D

    1997-10-15

    associated PSTH. This linear model provided good matches to the PSTHs associated with a wide range of current transients. However, for the largest amplitude current transients, a significant improvement in the PSTH match was often achieved by expanding the model to include the convolution of the second-order Wiener kernel with the input. 4. The overall transformation of current inputs into firing rate could be approximated by a second-order Wiener model, i.e. a cascade of a dynamic, linear filter followed by a static non-linearity. At a given mean firing rate, the non-linear component of the response of the motoneurone could be described by the square of the linear component multiplied by a constant coefficient. The amplitude of the response of the linear component increased with the average firing rate, whereas the value of the multiplicative coefficient in the non-linear component decreased. As a result, the overall transform could be predicted from the mean firing rate and the linear impulse response, yielding a relatively simple, general description of the motoneurone input-output function.

  17. Low carbon energy scenarios for sub-Saharan Africa: An input-output analysis on the effects of universal energy access and economic growth

    International Nuclear Information System (INIS)

    Hamilton, Thomas Gerard Adam; Kelly, Scott

    2017-01-01

    Meeting Sub-Saharan African (SSA) human development goals will require economic development to be the priority over the coming decades, but economic development ‘at all cost’ may not be acceptable across these goals. This paper aims to explore five development scenarios for the five largest economies in SSA to understand the implications to CO 2 -equivalent emissions (CO 2 -e) and off-grid energy modernisation in 2030. Within this scope GDP growth; economic structure; availability of energy resources; international trade; and, the development of distributed generation for remote locations are considered. Regional CO 2 emissions were studied using a Multi-Regional Input-Output Model for Africa. Under the scenarios analysed all five nations will be unable to reduce 2030 CO 2 -e emissions below 2012 levels, whilst simultaneously achieving forecast GDP growth and universal access to modernised energy services. 100% off-grid modernisation is estimated to require a three-fold increase in Primary Energy Supply and a 26% (1317 Mt) increase in 2030 CO 2 -e emissions. Total regional CO 2 -e emissions could be reduced from 45% to 35% by meeting a 50% renewable energy supply target by 2030. Climate Change policy would need to focus on multi-sector reform to reduce regional emissions as the agricultural sector is the largest emitter in Nigeria, Ethiopia and Kenya. - Highlights: • GHG 1 emissions were studied with a Multi-Regional Input-Output Model for Africa. • SSA 2 GDP growth is inextricably linked with access to additional energy supply. • SSA will not attain universal energy access and low carbon growth in parallel. • GHG emissions decline needs both renewable energy adoption and agriculture reform. • SSA Climate Change policy would need to target multiple GHG emitting sector reform.

  18. "Gtool5": a Fortran90 library of input/output interfaces for self-descriptive multi-dimensional numerical data

    Directory of Open Access Journals (Sweden)

    M. Ishiwatari

    2012-04-01

    Full Text Available A Fortran90 input/output library, "gtool5", is developed for use with numerical simulation models in the fields of Earth and planetary sciences. The use of this library will simplify implementation of input/output operations into program code in a consolidated form independent of the size and complexity of the software and data. The library also enables simple specification of the metadata needed for post-processing and visualization of the data. These aspects improve the readability of simulation code, which facilitates the simultaneous performance of multiple numerical experiments with different software and efficiency in examining and comparing the numerical results. The library is expected to provide a common software platform to reinforce research on, for instance, the atmosphere and ocean, where a close combination of multiple simulation models with a wide variety of complexity of physics implementations from massive climate models to simple geophysical fluid dynamics models is required.

  19. Substrate integrated waveguide filter showing improved stopband performance and fractional bandwidth using different input/output topologies

    Science.gov (United States)

    Kumari, Puja; Mudiganti, Jagadish Chandra

    2017-11-01

    In this work bandpass filter based on SIW technology with an adequate fractional bandwidth as well as refinement in the stopband performance is presented. Its application lies with the receiver filter working in the Ka band used mainly in the ground terminal for satellite communication. Additionally analysis of divergent input/output arrangement is also demonstrated. Three SIW filter having a varying passband from 19.2GHz -21.2GHz depending on the input/output are synthesized on a planar substrate having height of 0.508mm RT/duroid 6002 using periodically arranged metal via holes through a regulated PCB process. Simulated outputs has a in-band insertion loss 0.9dB and the improved stopband attenuation within the frequency range of 29.5GHz – 31GHz is around 45 dB. It is observed that the experimented results coincide completely with the results simulated in HFSS/CST.

  20. How important is agriculture and familiar agriculture agribusiness for Brazil and its states: an interregional input-output approach

    OpenAIRE

    Guilhoto, Joaquim José Martins; Ichihara, Silvio Massaru; Silveira, Fernando Gaiger; Diniz, Bernando P. Campolina; Azzoni, Carlos Roberto; Moreira, Guilherme R. C.

    2007-01-01

    The aim of this paper is estimate how important is agriculture and familiar agriculture agribusiness for Brazil and its states. To do so, the GDP for the agribusiness of these complexes is estimated for Brazil and for its 27 states. The estimation is based on an interregional input-output system constructed for the Brazilian economy. The agribusiness takes into consideration the relations between the agriculture production and the other sectors in the economy (inputs for production, industry,...

  1. Analysis of urban metabolic processes based on input-output method: model development and a case study for Beijing

    Science.gov (United States)

    Zhang, Yan; Liu, Hong; Chen, Bin; Zheng, Hongmei; Li, Yating

    2014-06-01

    Discovering ways in which to increase the sustainability of the metabolic processes involved in urbanization has become an urgent task for urban design and management in China. As cities are analogous to living organisms, the disorders of their metabolic processes can be regarded as the cause of "urban disease". Therefore, identification of these causes through metabolic process analysis and ecological element distribution through the urban ecosystem's compartments will be helpful. By using Beijing as an example, we have compiled monetary input-output tables from 1997, 2000, 2002, 2005, and 2007 and calculated the intensities of the embodied ecological elements to compile the corresponding implied physical input-output tables. We then divided Beijing's economy into 32 compartments and analyzed the direct and indirect ecological intensities embodied in the flows of ecological elements through urban metabolic processes. Based on the combination of input-output tables and ecological network analysis, the description of multiple ecological elements transferred among Beijing's industrial compartments and their distribution has been refined. This hybrid approach can provide a more scientific basis for management of urban resource flows. In addition, the data obtained from distribution characteristics of ecological elements may provide a basic data platform for exploring the metabolic mechanism of Beijing.

  2. Analysis of influence mechanism of energy-related carbon emissions in Guangdong: evidence from regional China based on the input-output and structural decomposition analysis.

    Science.gov (United States)

    Wang, Changjian; Wang, Fei; Zhang, Xinlin; Deng, Haijun

    2017-11-01

    It is important to analyze the influence mechanism of energy-related carbon emissions from a regional perspective to effectively achieve reductions in energy consumption and carbon emissions in China. Based on the "energy-economy-carbon emissions" hybrid input-output analysis framework, this study conducted structural decomposition analysis (SDA) on carbon emissions influencing factors in Guangdong Province. Systems-based examination of direct and indirect drivers for regional emission is presented. (1) Direct effects analysis of influencing factors indicated that the main driving factors of increasing carbon emissions were economic and population growth. Carbon emission intensity was the main contributing factor restraining carbon emissions growth. (2) Indirect effects analysis of influencing factors showed that international and interprovincial trades significantly affected the total carbon emissions. (3) Analysis of the effects of different final demands on the carbon emissions of industrial sector indicated that the increase in carbon emission arising from international and interprovincial trades is mainly concentrated in energy- and carbon-intensive industries. (4) Guangdong had to compromise a certain amount of carbon emissions during the development of its export-oriented economy because of industry transfer arising from the economic globalization, thereby pointing to the existence of the "carbon leakage" problem. At the same time, interprovincial export and import resulted in Guangdong transferring a part of its carbon emissions to other provinces, thereby leading to the occurrence of "carbon transfer."

  3. The Comparative Effects of Comprehensible Input, Output and Corrective Feedback on the Receptive Acquisition of L2 Vocabulary Items

    Directory of Open Access Journals (Sweden)

    Mohammad Nowbakht

    2015-08-01

    Full Text Available In the present study, the comparative effects of comprehensible input, output and corrective feedback on the receptive acquisition of L2 vocabulary items were investigated. Two groups of beginning EFL learners participated in the study. The control group received comprehensible input only, while the experimental group received input and was required to produce written output. They also received corrective feedback on their lexical errors if any. This could result in the production of modified output. The results of the study indicated that (a the group which produced output and received feedback (if necessary outperformed the group which only received input in the post-test, (b within the experimental group, feedback played a greater role in learners’ better performance than output, (c also a positive correlation between the amount of feedback an individual learner received, and his overall performance in the post-test; and also between the amount of feedback given for a specific word and the correct responses given to its related item in the post-test was found.  The findings of this study provide evidence for the role of output production along with receiving corrective feedback in enhancing L2 processing by drawing further L2 learners’ attention to their output which in turn may result in improving their receptive acquisition of L2 words. Furthermore, as the results suggested, feedback made a more contribution to L2 development than output. Keywords: comprehensible input, output, interaction, corrective feedback, modified output, receptive vocabulary acquisition

  4. A grey neural network and input-output combined forecasting model. Primary energy consumption forecasts in Spanish economic sectors

    International Nuclear Information System (INIS)

    Liu, Xiuli; Moreno, Blanca; García, Ana Salomé

    2016-01-01

    A combined forecast of Grey forecasting method and neural network back propagation model, which is called Grey Neural Network and Input-Output Combined Forecasting Model (GNF-IO model), is proposed. A real case of energy consumption forecast is used to validate the effectiveness of the proposed model. The GNF-IO model predicts coal, crude oil, natural gas, renewable and nuclear primary energy consumption volumes by Spain's 36 sub-sectors from 2010 to 2015 according to three different GDP growth scenarios (optimistic, baseline and pessimistic). Model test shows that the proposed model has higher simulation and forecasting accuracy on energy consumption than Grey models separately and other combination methods. The forecasts indicate that the primary energies as coal, crude oil and natural gas will represent on average the 83.6% percent of the total of primary energy consumption, raising concerns about security of supply and energy cost and adding risk for some industrial production processes. Thus, Spanish industry must speed up its transition to an energy-efficiency economy, achieving a cost reduction and increase in the level of self-supply. - Highlights: • Forecasting System Using Grey Models combined with Input-Output Models is proposed. • Primary energy consumption in Spain is used to validate the model. • The grey-based combined model has good forecasting performance. • Natural gas will represent the majority of the total of primary energy consumption. • Concerns about security of supply, energy cost and industry competitiveness are raised.

  5. The Technological Input-output Efficiency of High-technology Enterprises in China Based on the DEA method

    Directory of Open Access Journals (Sweden)

    Lu Jing

    2017-01-01

    Full Text Available High-technology enterprises play the leader role in the regional economic progress, but nowadays technological resources have many problems such as division, separation and dispersing. It’s an urgent problem to be solved that how to evaluate input-output productivity of technological resources towards industries and regions scientifically and efficiently. Firstly the article analyzes the input-output efficiency status of technological resources at home and abroad. Then high-technology enterprises in 29 provinces, as the subject of evaluation, are analyzed for their operation efficiency by DEA. The article states the suggestions like balanced development among regions and reasonable structure of input and output by comparing the differences among regions. And the article estimates the technological resources configuration efficiency of 5 leader industries and explains the developmental characteristics and direction among industries. And on these bases the article conducts hypothesis testing for inner elements which might have an influence on the operational efficiency by Tobit model. Finally, the paper proposes many suggestions to the benefits of promoting the productivity of high-technology enterprise according to the comprehensive analysis.

  6. Industrial and ecological cumulative exergy consumption of the United States via the 1997 input-output benchmark model

    International Nuclear Information System (INIS)

    Ukidwe, Nandan U.; Bakshi, Bhavik R.

    2007-01-01

    This paper develops a thermodynamic input-output (TIO) model of the 1997 United States economy that accounts for the flow of cumulative exergy in the 488-sector benchmark economic input-output model in two different ways. Industrial cumulative exergy consumption (ICEC) captures the exergy of all natural resources consumed directly and indirectly by each economic sector, while ecological cumulative exergy consumption (ECEC) also accounts for the exergy consumed in ecological systems for producing each natural resource. Information about exergy consumed in nature is obtained from the thermodynamics of biogeochemical cycles. As used in this work, ECEC is analogous to the concept of emergy, but does not rely on any of its controversial claims. The TIO model can also account for emissions from each sector and their impact and the role of labor. The use of consistent exergetic units permits the combination of various streams to define aggregate metrics that may provide insight into aspects related to the impact of economic sectors on the environment. Accounting for the contribution of natural capital by ECEC has been claimed to permit better representation of the quality of ecosystem goods and services than ICEC. The results of this work are expected to permit evaluation of these claims. If validated, this work is expected to lay the foundation for thermodynamic life cycle assessment, particularly of emerging technologies and with limited information

  7. Simultaneous material flow analysis of nickel, chromium, and molybdenum used in alloy steel by means of input-output analysis.

    Science.gov (United States)

    Nakajima, Kenichi; Ohno, Hajime; Kondo, Yasushi; Matsubae, Kazuyo; Takeda, Osamu; Miki, Takahiro; Nakamura, Shinichiro; Nagasaka, Tetsuya

    2013-05-07

    Steel is not elemental iron but rather a group of iron-based alloys containing many elements, especially chromium, nickel, and molybdenum. Steel recycling is expected to promote efficient resource use. However, open-loop recycling of steel could result in quality loss of nickel and molybdenum and/or material loss of chromium. Knowledge about alloying element substance flow is needed to avoid such losses. Material flow analyses (MFAs) indicate the importance of steel recycling to recovery of alloying elements. Flows of nickel, chromium, and molybdenum are interconnected, but MFAs have paid little attention to the interconnected flow of materials/substances in supply chains. This study combined a waste input-output material flow model and physical unit input-output analysis to perform a simultaneous MFA for nickel, chromium, and molybdenum in the Japanese economy in 2000. Results indicated the importance of recovery of these elements in recycling policies for end-of-life (EoL) vehicles and constructions. Improvement in EoL sorting technologies and implementation of designs for recycling/disassembly at the manufacturing phase are needed. Possible solutions include development of sorting processes for steel scrap and introduction of easier methods for identifying the composition of secondary resources. Recovery of steel scrap with a high alloy content will reduce primary inputs of alloying elements and contribute to more efficient resource use.

  8. Global industrial impact coefficient based on random walk process and inter-country input-output table

    Science.gov (United States)

    Xing, Lizhi; Dong, Xianlei; Guan, Jun

    2017-04-01

    Input-output table is very comprehensive and detailed in describing the national economic system with lots of economic relationships, which contains supply and demand information among industrial sectors. The complex network, a theory and method for measuring the structure of complex system, can describe the structural characteristics of the internal structure of the research object by measuring the structural indicators of the social and economic system, revealing the complex relationship between the inner hierarchy and the external economic function. This paper builds up GIVCN-WIOT models based on World Input-Output Database in order to depict the topological structure of Global Value Chain (GVC), and assumes the competitive advantage of nations is equal to the overall performance of its domestic sectors' impact on the GVC. Under the perspective of econophysics, Global Industrial Impact Coefficient (GIIC) is proposed to measure the national competitiveness in gaining information superiority and intermediate interests. Analysis of GIVCN-WIOT models yields several insights including the following: (1) sectors with higher Random Walk Centrality contribute more to transmitting value streams within the global economic system; (2) Half-Value Ratio can be used to measure robustness of open-economy macroeconomics in the process of globalization; (3) the positive correlation between GIIC and GDP indicates that one country's global industrial impact could reveal its international competitive advantage.

  9. Cutting export subsidies, cropping domestic production: input-output analysis of the Swiss dairy sector after abolishment of the ‘Chocolate law’ subsidies

    Directory of Open Access Journals (Sweden)

    Seyhan KÂHYA

    2017-02-01

    Full Text Available The `Chocolate law’ in Switzerland enables subsidies for dairy and wheat farmers, bound to the condition that their products are exported after processing (Swiss Federation, 2011. Though the Ministerial Conference of the World Trade Organization has decided in December 2015 that this law has to be abolished by 2021 [WTO, 2015]. Cutting subsidies might lead to a demand shock and consequently a cropped domestic production (Miller and Blair, 1985. We analysed in this study the interdependence of the agro-food sectors by a Leontief input-output model and their linkages to other sectors (Chereny and Watanabe, 1958, Leontief 1986 and additionally, the amount, direction and dispersion of the possible demand shock.  Hence, non-meat food processors and dairy processing were determined as key sectors as they have strong linkage effects and are rather concentrated to few sectors. Both sectors rely strongly on the output of the raw milk producers and have few sectors to sell their products. Outside of the cut sectors, these sectors will be challenged the most from this new policy.

  10. Estimating raw material equivalents on a macro-level: comparison of multi-regional input-output analysis and hybrid LCI-IO.

    Science.gov (United States)

    Schoer, Karl; Wood, Richard; Arto, Iñaki; Weinzettel, Jan

    2013-12-17

    The mass of material consumed by a population has become a useful proxy for measuring environmental pressure. The "raw material equivalents" (RME) metric of material consumption addresses the issue of including the full supply chain (including imports) when calculating national or product level material impacts. The RME calculation suffers from data availability, however, as quantitative data on production practices along the full supply chain (in different regions) is required. Hence, the RME is currently being estimated by three main approaches: (1) assuming domestic technology in foreign economies, (2) utilizing region-specific life-cycle inventories (in a hybrid framework), and (3) utilizing multi-regional input-output (MRIO) analysis to explicitly cover all regions of the supply chain. While the first approach has been shown to give inaccurate results, this paper focuses on the benefits and costs of the latter two approaches. We analyze results from two key (MRIO and hybrid) projects modeling raw material equivalents, adjusting the models in a stepwise manner in order to quantify the effects of individual conceptual elements. We attempt to isolate the MRIO gap, which denotes the quantitative impact of calculating the RME of imports by an MRIO approach instead of the hybrid model, focusing on the RME of EU external trade imports. While, the models give quantitatively similar results, differences become more pronounced when tracking more detailed material flows. We assess the advantages and disadvantages of the two approaches and look forward to ways to further harmonize data and approaches.

  11. China’s Input-Output Efficiency of Water-Energy-Food Nexus Based on the Data Envelopment Analysis (DEA Model

    Directory of Open Access Journals (Sweden)

    Guijun Li

    2016-09-01

    Full Text Available An explanation and quantification of the water-energy-food nexus (WEF-Nexus is important to advance our understanding of regional resource management, which is presently in its infant stage. Evaluation of the current states, interconnections, and trends of WEF-Nexus, in cities, has largely been ignored due to quantification hurdles and the lack of available data. Based on the interaction of WEF-Nexus with population system, economic system, and environmental system, this paper builds the input output index system at the city level. Using the input output index system, we evaluate the WEF-Nexus input-output efficiency with the data envelopment analysis (DEA model. We regard the decision making unit as a “black box”, to explore the states and trends of WEF-Nexus. In the empirical study based on data from China, we compare the input-output efficiency of WEF-Nexus in 30 provinces across China, from 2005 to 2014, to better understand their statues and trends of the input-output efficiency holistically. Together with the Malmquist index, factors leading to regional differences in the fluctuation of input-output efficiency are explored. Finally, we conclude that the DEA model indicates the regional consumption of WEF resources in the horizontal dimension and the trends in vertical dimension, together with the Malmquist index, to explain the variations for proposing specific implications.

  12. Nonlinear SVM-DTC for induction motor drive using input-output feedback linearization and high order sliding mode control.

    Science.gov (United States)

    Ammar, Abdelkarim; Bourek, Amor; Benakcha, Abdelhamid

    2017-03-01

    This paper presents a nonlinear Direct Torque Control (DTC) strategy with Space Vector Modulation (SVM) for an induction motor. A nonlinear input-output feedback linearization (IOFL) is implemented to achieve a decoupled torque and flux control and the SVM is employed to reduce high torque and flux ripples. Furthermore, the control scheme performance is improved by inserting a super twisting speed controller in the outer loop and a load torque observer to enhance the speed regulation. The combining of dual nonlinear strategies ensures a good dynamic and robustness against parameters variation and disturbance. The system stability has been analyzed using Lyapunov stability theory. The effectiveness of the control algorithm is investigated by simulation and experimental validation using Matlab/Simulink software with real-time interface based on dSpace 1104. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  13. Estimating the basilar-membrane input-output function in normal-hearing and hearing-impaired listeners

    DEFF Research Database (Denmark)

    Jepsen, Morten Løve; Dau, Torsten

    is transformed more linearly, the ratio between the slopes of growth of masking (GOM) functions provides an estimate of BM compression at the signal frequency. In this study, this paradigm is extended to also estimate the knee-point of the I/O-function between linear rocessing at low levels and compressive......To partly characterize the function of cochlear processing in humans, the basilar membrane (BM) input-output function can be estimated. In recent studies, forward masking has been used to estimate BM compression. If an on-frequency masker is processed compressively, while an off-frequency masker....... Data were collected from eight normal-hearing (NH) and five hearing-impaired (HI) listeners with mild to moderate sensorineural hearing loss. Both groups showed large inter-subject but low intrasubject variability. When the knee-point could be estimated for the HI listeners it was shifted towards...

  14. Considering capital goods in life cycle assessments by input-output analysis. Offshore wind farm as an application example

    International Nuclear Information System (INIS)

    Eickelkamp, Timo

    2013-01-01

    Capital goods are not normally taken into consideration in assessing the sustainability of products on the basis of life cycle assessments. Capital goods are machines and buildings that are used for production purposes over the course of a product's life cycle. Using an offshore wind farm as an example the present study shows how capital goods can be taken into account via a methodologically expanded input-output analysis and thus factored into the life cycle assessment. Besides comparing different calculation methods the author performs a detailed analysis of those parameters with the greatest influence on the outcome. The results show that capital goods have a substantial impact on sustainability in both energy-related and environmental terms. Capital goods should therefore be taken into consideration in life cycle assessments.

  15. Application of Environmental Input-Output Analysis for Corporate and Product Environmental Footprints—Learnings from Three Cases

    DEFF Research Database (Denmark)

    Kjær, Louise Laumann; Høst-Madsen, Niels Karim Høst-Madsen; Schmidt, Jannick H.

    2015-01-01

    An increasing number of companies are expanding their environmental impact reduction targets and strategies to include their supply chains or whole product life cycles. In this paper, we demonstrate and evaluate an approach, where we used a hybrid Environmental Input-Output (EIO) database...... 2, the approach was used as basis for an Environmental Profit and Loss account for the healthcare company, Novo Nordisk A/S. Case study 3 used the approach for life cycle assessment of a tanker ship. We conclude that EIO-based analyses offer a holistic view of environmental performance, provide...... a foundation for decision-making within reasonable time and cost, and for companies with a large upstream environmental footprint, the analysis supports advancing their sustainability agenda to include supply chain impacts. However, there are implications when going from screening to implementing the results...

  16. Economic and CO2 mitigation impacts of promoting biomass heating systems: An input-output study for Vorarlberg, Austria

    International Nuclear Information System (INIS)

    Madlener, Reinhard; Koller, Martin

    2007-01-01

    This paper reports on an empirical investigation about the economic and CO 2 mitigation impacts of bioenergy promotion in the Austrian federal province of Vorarlberg. We study domestic value-added, employment, and fiscal effects by means of a static input-output analysis. The bioenergy systems analysed comprise biomass district heating, pellet heating, and automated wood chip heating systems, as well as logwood stoves and boilers, ceramic stoves, and buffer storage systems. The results indicate that gross economic effects are significant, regarding both investment and operation of the systems, and that the negative economic effects caused by the displacement of conventional decentralised heating systems might be in the order of 20-40%. Finally, CO 2 mitigation effects are substantial, contributing already in 2004 around 35% of the 2010 CO 2 mitigation target of the Land Vorarlberg for all renewable energy sources

  17. Modelo Input-Output de Leontief: teoría de grafos frente a estructuras pretopológicas

    Directory of Open Access Journals (Sweden)

    Amo Saus, Mª Elisa

    2001-01-01

    Full Text Available Las relaciones intersectoriales presentes en el Modelo Input-Output han sido objeto de numerosos análisis matemáticos. En una primera etapa, y debido a su propio planteamiento como un sistema de ecuaciones lineales, W. Leontief y su escuela, haciendo uso del álgebra lineal y el cálculo matricial, consiguieron computar el vector de producciones totales a partir del vector de demandas finales. Posteriormente, autores como Kuhn (1956 ó R. Dorfman, P. Samuelson y R. Solow (1958 emplearon técnicas de programación lineal en la resolución del modelo. Más tarde, C. Ponsard (1969 y R. Lantner(1974, entre otros, profundizaron en el análisis estructural del modelo Input-Output, mediante técnicas de grafos, asignándole un grafo de transferencia. En las VIII Jornadas de ASEPUMA, nosotras mismas, siguiendo el planteamiento de M. Mougeot, G. Duru y J. P. Auray (1977, expusimos cómo ciertas relaciones de interdependencia definidas entre las ramas de producción inducían unas estructuras pretoplógicas que permitían determinar su propensión a comprar o vender al resto. Analizados en profundidad estos dos últimos métodos de análisis, descubrimos grandes analogías en ambos planteamientos en sus aportaciones al estudio de las relaciones de interdependencia en el modelo, y que ahora tratamos de exponer brevemente.

  18. Interprovincial transfer of embodied energy between the Jing-Jin-Ji area and other provinces in China: A quantification using interprovincial input-output model.

    Science.gov (United States)

    Chen, Weiming; Wu, Sanmang; Lei, Yalin; Li, Shantong

    2017-04-15

    Commodity trade between regions implies a large amount of energy transfer. As an important economic growth pole of China, the Jing-Jin-Ji area (Beijing-Tianjin-Hebei) is also one of the areas with the largest energy consumption in China. Moreover, the primary energy consumer goods in this area are fossil fuels, such as coal. This has led to serious air pollution in the area. Therefore, the reduction of energy consumption under the premise of maintaining sustained economic growth is an important task of the Jing-Jin-Ji area. In this study, an interprovincial input-output model was applied to quantitatively estimate the embodied energy transfer between Jing-Jin-Ji area and other provinces in China. The results indicated that the Metal and nonmetal mineral processing industry and the Electrical, gas and water industry in the Jing-Jin-Ji area exported a large amount of embodied energy to the Yangtze River Delta and the Pearl River Delta. However, the embodied energy export of the Jing-Jin-Ji area mainly exported by Hebei province. Beijing and Tianjin even have some net import of embodied energy. The embodied energy transfer between Tianjin, Hebei and other provinces was mainly driven by investment, while the main media of embodied energy transfer between Beijing and other provinces was consumption. Therefore, we suggest that the Jing-Jin-Ji area should further increase the degree of dependence on other provinces' energy-intensive products and reduce the export of energy-intensive products. In addition, there should be difference in the energy and industrial policies among Beijing, Tianjin and Hebei, and the problems of high energy consumption and high proportion of heavy industry in Hebei should be first resolved. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. El Análisis Input-Output Estocástico: una revisión

    Directory of Open Access Journals (Sweden)

    Rueda Cantuche, José Manuel

    2001-01-01

    Full Text Available El componente de error que implica cualquier medida de la realidad económica tiene su origen en el error de medida, el error de muestreo y la confidencialidad de la información que se solicita. El análisis input-output no está libre de sus importantes consecuencias sobre los resultados que de él se pueden derivar: multiplicadores, valores de producción, variación en la productividad total de los factores de producción, etc. Por ello, el estudio de la precisión de los coeficientes técnicos a través de cualquier medida de incertidumbre parece sugerir la incorporación del carácter estocástico al modelo de Leontief. En este trabajo se pretende esbozar las más importantes líneas de investigación realizadas con este fin.

  20. Assessing the influence of manufacturing sectors on electricity demand. A cross-country input-output approach

    Energy Technology Data Exchange (ETDEWEB)

    Tarancon, Miguel Angel; Callejas Albinana, Fernando [Faculty of Law and Social Sciences, Universidad de Castilla - La Mancha, Ronda de Toledo s/n, 13071 Ciudad Real (Spain); Del Rio, Pablo [Institute for Public Policies and Goods (IPP), Centro de Ciencias Humanas y Sociales, CSIC, C/Albasanz 26-28, 28037 Madrid (Spain)

    2010-04-15

    The production and consumption of electricity is a major source of CO{sub 2} emissions in Europe and elsewhere. In turn, the manufacturing sectors are significant end-users of electricity. In contrast to most papers in the literature, which focus on the supply-side, this study tackles the demand-side of electricity. An input-output approach combined with a sensitivity analysis has been developed to analyse the direct and indirect consumptions of electricity by eighteen manufacturing sectors in fifteen European countries, with indirect electricity demand related to the purchase of industrial products from other sectors which, in turn, require the consumption of electricity in their manufacturing processes. We identify the industrial transactions and sectors, which account for a greater share of electricity demand. In addition, the impact of an electricity price increase on the costs and prices of manufacturing products is simulated through a price model, allowing us to identify those sectors whose manufacturing costs are most sensitive to an increase in the electricity price. (author)

  1. A stock-flow consistent input-output model with applications to energy price shocks, interest rates, and heat emissions

    Science.gov (United States)

    Berg, Matthew; Hartley, Brian; Richters, Oliver

    2015-01-01

    By synthesizing stock-flow consistent models, input-output models, and aspects of ecological macroeconomics, a method is developed to simultaneously model monetary flows through the financial system, flows of produced goods and services through the real economy, and flows of physical materials through the natural environment. This paper highlights the linkages between the physical environment and the economic system by emphasizing the role of the energy industry. A conceptual model is developed in general form with an arbitrary number of sectors, while emphasizing connections with the agent-based, econophysics, and complexity economics literature. First, we use the model to challenge claims that 0% interest rates are a necessary condition for a stationary economy and conduct a stability analysis within the parameter space of interest rates and consumption parameters of an economy in stock-flow equilibrium. Second, we analyze the role of energy price shocks in contributing to recessions, incorporating several propagation and amplification mechanisms. Third, implied heat emissions from energy conversion and the effect of anthropogenic heat flux on climate change are considered in light of a minimal single-layer atmosphere climate model, although the model is only implicitly, not explicitly, linked to the economic model.

  2. Greenhouse Gas Emission Intensities Based on Economic Input-Output Tables and Case Studies of Product LCA

    Science.gov (United States)

    Kobayashi, Yoshinori; Oguchi, Masahiro; Amemiya, Kumiko; Kagami, Hideyo; Haruki, Kazuhito

    In this paper, emission intensity tables of greenhouse gas (especially HFC, PFC and SF6) are presented and LCA (Life Cycle Assessment) case studies using those tables are discussed. The emission intensity tables of greenhouse gas are derived from Economic Input-Output Tables (I/O tables) and several statistical data. The emission intensities derived from the total amount transferred between sections in I/O tables become larger than the intensities derived from the actual amount of gases transferred between sections. In order to calculate the intensities of these gases, certain sections of the I/O tables should be decomposed. The I/O tables are modified, adding these sections, which correspond to ″HFC″, ″PFC″, ″HCFC″ and ″SF6″ manufacturing industries. The emission intensities become large in not only ″HFC″, ″PFC″, ″HCFC″, ″SF6″ subsections, but also ″Semiconductor devices and integrated circuits″, ″Liquid crystal devices″ and ″Relay switches and switchboards″ sections. LCA case studies are conducted on a laptop PC and an air conditioner. The greenhouse gas emission at each stage of the life cycle is increased by about 20% for a laptop PC and by about 1% for an air conditioner with the CO2 equivalent compared with the result calculated by the emission intensity tables of CO2 and N2O.

  3. The impacts of removing energy subsidies on economy-wide rebound effects in China: An input-output analysis

    International Nuclear Information System (INIS)

    Li, Ke; Jiang, Zhujun

    2016-01-01

    Facing with the increasing contradiction of economic growth, energy scarcity and environmental deterioration, energy conservation and emissions abatement have been ambitious targets for the Chinese government. Improving energy efficiency through technological advancement is a primary measure to achieve these targets. However, the existence of energy rebound effects may completely or partially offset energy savings associated with technological advancement. This paper adopted a modified input-output model to estimate the economy-wide energy rebound effects across China's economic sectors with the consideration of energy subsidies. The empirical results show that the aggregate rebound effect of China is about 1.9% in 2007–2010, thus technological advancement significantly restrains energy consumption increasing. Removing energy subsidies will cause the aggregate rebound effect declines to 1.53%. Specifically, removing subsidies for coal and nature gas can reduce the rebound effects signifcantly, while removing the subsidies for oil products has a small impact on rebound effect. The existence of rebound effects implies that technological advancement should be cooperated with energy price reform so as to achieve the energy saving target. In addition, the government should consider the diversity of economic sectors and energy types when design the reform schedule. - Highlights: • Rebound effects with the consideration of energy subsidies are estimated in China. • When considering the interactions among sectors, the aggregate rebound effect become small. • Removing subsidies will reduce energy consumption, thereby declining the rebound effects. • Removing subsidies for different energy types has varies effects on rebound effect.

  4. Compilation of an Embodied CO2 Emission Inventory for China Using 135-Sector Input-Output Tables

    Directory of Open Access Journals (Sweden)

    Qian Zhang

    2015-06-01

    Full Text Available A high-quality carbon dioxide (CO2 inventory is the cornerstone of climate change mitigation. Most of the previously reported embodied CO2 inventories in China have no more than 42 sectors, and this limitation may introduce apparent inaccuracy into the analysis at the sector level. To improve the quality of input-output (IO-based CO2 inventories for China, we propose a practical energy allocation approach to link the energy statistics to the 135-sector IO tables for China and compiled a detailed embodied CO2 intensity and inventory for 2007 using a single-region IO model. Interpretation of embodied CO2 intensities by fuel category, direct requirement, and total requirement in the sectors were conducted to identify, from different perspectives, the significant contributors. The total embodied CO2 emissions in 2007 was estimated to be 7.1 Gt and was separated into the industrial sector and final demand sector. Although the total CO2 estimations by the 42-sector and 135-sector analyses are equivalent, the allocations in certain groups of sectors differ significantly. Our compilation methodologies address indirect environmental impacts from industrial sectors, including the public utility and tertiary sectors. This method of interpretation could be utilized for better communication with stakeholders.

  5. Application of Environmental Input-Output Analysis for Corporate and Product Environmental Footprints—Learnings from Three Cases

    Directory of Open Access Journals (Sweden)

    Louise Laumann Kjaer

    2015-08-01

    Full Text Available An increasing number of companies are expanding their environmental impact reduction targets and strategies to include their supply chains or whole product life cycles. In this paper, we demonstrate and evaluate an approach, where we used a hybrid Environmental Input-Output (EIO database as a basis for corporate and product environmental footprint accounts, including the entire supply chain. We present three cases, where this approach was applied. Case study 1 describes the creation of total corporate carbon footprint accounts for three Danish regional healthcare organisations. In case study 2, the approach was used as basis for an Environmental Profit and Loss account for the healthcare company, Novo Nordisk A/S. Case study 3 used the approach for life cycle assessment of a tanker ship. We conclude that EIO-based analyses offer a holistic view of environmental performance, provide a foundation for decision-making within reasonable time and cost, and for companies with a large upstream environmental footprint, the analysis supports advancing their sustainability agenda to include supply chain impacts. However, there are implications when going from screening to implementing the results, including how to measure and monitor the effect of the different actions. Thus, future research should include more detailed models to support decision-making.

  6. System input-output theoretic three-dimensional measurement based on circular-shaped structured light patterns

    Science.gov (United States)

    Lee, Deokwoo; Krim, Hamid

    2017-07-01

    Alternative approaches to three-dimensional (3-D) reconstruction by employing the concepts of "system identification" and "communication systems" based on structured light patterns are proposed. In addition, a sampling criterion of the light source is derived in the case of using multiple projectors because 3-D reconstruction sometimes employs multiple viewpoints (cameras) and multiple structured light sources (or projectors). To reformulate a reconstruction problem, an input-output (I/O) system theoretic is adopted, and camera(s) and light source(s) that are located at different positions are defined as the output and the input, respectively. Akin to the system identification problem, the ratio of an output to an input, the "system function," is defined as a 3-D measurement result. Alternatively, the reconstruction work can employ the concept of the "modulation and demodulation theory," and the reconstruction work can be reinterpreted as an "input estimation problem." This contribution chiefly deals with approximate reconstruction results that are sufficient for practical applications, such as 3-D object detection, clarification, recognition, and classification, rather than a perfect 3-D reconstruction itself. To that end, the development of an efficient and fast 3-D imaging system framework is proposed.

  7. Design and microwave test of an ultrawideband input/output structure for sheet beam travelling wave tubes

    International Nuclear Information System (INIS)

    Shu, Guoxiang; Wang, Jianxun; Liu, Guo; Yang, Liya; Luo, Yong; Wang, Shafei

    2015-01-01

    Broadband operation is of great importance for the applications of travelling wave tubes such as high-data communication and wideband radar. An input/output (I/O) structure operating with broadband property plays a significant role to achieve these applications. In this paper, a Y-type branch waveguide (YTBW) coupler and its improvements are proposed and utilized to construct an extremely wideband I/O structure to ensure the broadband operation for sheet beam travelling wave tubes (SB-TWTs). Cascaded reflection resonators are utilized to improve the isolation characteristic and transmission efficiency. Furthermore, to minimize the reflectivity of the port connected with the RF circuit, wave-absorbing material (WAM) is loaded in the resonator. Simulation results for the YTBW loaded with WAM predict an excellent performance with a 50.2% relative bandwidth for port reflectivity under −15 dB, transmission up to −1.5 dB, and meanwhile isolation under −20 dB. In addition, the coupler has a relatively compact configuration and the beam tunnel can be widened, which is beneficial for the propagation of the electrons. A Q-band YTBW loaded with two reflection resonators is fabricated and microwave tested. Vector network analyzer (VNA) measured results have an excellent agreement with our simulation, which verify our theoretical analysis and simulation calculation

  8. Alteration of distortion product otoacoustic emission input/output functions in subjects with a previous history of middle ear dysfunction.

    Science.gov (United States)

    De P Campos, Ualace; Sanches, Seisse G; Hatzopoulos, Stavros; Carvallo, Renata M M; Kochanek, Krzysztof; Skarżyński, Henryk

    2012-04-01

    The aim of this study was to investigate the effects of sub-clinical alterations on the amplitudes and slopes of the DPOAE input-output responses from subjects with previous history of middle ear dysfunction. The study included 15 subjects with and 15 subjects without a history of otitis media in the last 10 years. All participants were assessed with acoustic immittance, pure-tone audiometry, and DPOAEs. For the later, I/O functions and I/O slopes were estimated at 1501, 2002, 3174, 4004 and 6384 Hz. No statistically significant differences were found between the 2 groups in terms of behavioral thresholds. The group with a previous history of middle ear dysfunction presented significantly lower mean DPOAE amplitudes at 2002, 3174 and 4004 Hz. In terms of DPOAE slopes, no statistically significant differences were observed at the tested frequencies, except at 3174 Hz. Middle ear pathologies can produce subclinical alterations that are undetectable with traditional pure-tone audiometry. The data from the present study show that reduced amplitude DPOAEs are associated with a previous history of middle ear complications. The corresponding DPOAE slopes were affected at only 1 tested frequency, suggesting that the cochlear non-linearity is preserved. Considering these results, it remains to be elucidated to what degree the DPOAE amplitude attenuation interferes with higher-order auditory tasks.

  9. Total waste-load control and allocation based on input-output analysis for Shenzhen, south China.

    Science.gov (United States)

    Ni, J R; Zhong, D S; Huang, Y F; Wang, H

    2001-01-01

    The general objective for this paper is to reveal the dynamic relationships between the rapid economic development, water pollution and the subsequent waste-load allocation in different economic sectors through a case-study in Shenzhen City, South China. Two-objective analysis model was employed based on the input-output table for Shenzhen with the full consideration of various constraints in local area. The improved Tchebycheff procedure was used for obtaining the solutions. The predictions were made on economic development and pollutants from wastewater in different sectors and different planning years. The present study allows for the consideration of the economic structural adjustment. It is found that the current situation of economic structure is generally good and is subject to further adjustment in Shenzhen, although it has undergone the rapid development in the past 18 years. When the maximum Gross Domestic Production and the minimum Chemical Oxygen Demand are chosen as the two objectives subject to other constraints, the harmonized results indicated a scheme that claims substantial reduction of polluting effluences in Shenzhen while closely keeping the economic growth rate as planned.

  10. Hydro-climatic dominated on long-term input-output nutrient budget of subtropical forest ecosystem

    Science.gov (United States)

    Chang, C. T.; Wang, C. P.; Huang, J. C.; Lin, T. C.

    2016-12-01

    Two-decadal budget of atmospheric deposition (input) and streamwater export (output) from 1994 to 2013 were collected in a subtropical forest at northeastern Taiwan. There were significant decline trends of summer SO42- and NO3- fluxes (June-August), but not for the winter. With the identifications of possible sources of air pollutants from atmospheric backward trajectories model and local air quality observations, the declining of sulfate and nitrate in the summer was possibly due to decreases of local emissions of SO2 and NOx. In contrast, the non-declining long-range transport of acid species might contribute a large portion of the acid deposition in the winter and led to the lack of significant declining trends of SO42- and NO3- fluxes. The results suggest that long-range transport of acidic pollutants could be a threat to forest ecosystems in the region. The two-decadal budget also revealed that both input and output of ions were positively correlated with water quantity, indicating strong hydro-climatic dominated the input-output nutrient cycling. Especially for the greater ions export via stream water during the wet summer growing season, which is noticeably contrast to the paradigm of biological control resulting in low ions export during the growing season. Our study is of significant implication under the trends of warming climate because global climate change could directly affect biogeochemical cycles particularly in the tropical/subtropical ecosystems through amplifying the seasonal precipitation.

  11. The stability of input structures in a supply-driven input-output model: A regional analysis

    Energy Technology Data Exchange (ETDEWEB)

    Allison, T.

    1994-06-01

    Disruptions in the supply of strategic resources or other crucial factor inputs often present significant problems for planners and policymakers. The problem may be particularly significant at the regional level where higher levels of product specialization mean supply restrictions are more likely to affect leading regional industries. To maintain economic stability in the event of a supply restriction, regional planners may therefore need to evaluate the importance of market versus non-market systems for allocating the remaining supply of the disrupted resource to the region`s leading consuming industries. This paper reports on research that has attempted to show that large short term changes on the supply side do not lead to substantial changes in input coefficients and do not therefore mean the abandonment of the concept of the production function as has been suggested (Oosterhaven, 1988). The supply-driven model was tested for six sectors of the economy of Washington State and found to yield new input coefficients whose values were in most cases close approximations of their original values, even with substantial changes in supply. Average coefficient changes from a 50% output reduction in these six sectors were in the vast majority of cases (297 from a total of 315) less than +2.0% of their original values, excluding coefficient changes for the restricted input. Given these small changes, the most important issue for the validity of the supply-driven input-output model may therefore be the empirical question of the extent to which these coefficient changes are acceptable as being within the limits of approximation.

  12. T-type calcium channels promote predictive homeostasis of input-output relations in thalamocortical neurons of lateral geniculate nucleus

    Directory of Open Access Journals (Sweden)

    Su Z. Hong

    2014-08-01

    Full Text Available A general theory views the function of all neurons as prediction, and one component of this theory is that of predictive homeostasis or prediction error. It is well established that sensory systems adapt so that neuronal output maintains sensitivity to sensory input, in accord with information theory. Predictive homeostasis applies the same principle at the cellular level, where the challenge is to maintain membrane excitability at the optimal homeostatic level so that spike generation is maximally sensitive to small gradations in synaptic drive. Negative feedback is a hallmark of homeostatic mechanisms, as exemplified by depolarization-activated potassium channels. However, T-type calcium channels exhibit positive feedback that appears at odds with the theory. In thalamocortical neurons of lateral geniculate nucleus (LGN, T-type channels are capable of causing bursts of spikes with an all-or-none character in response to excitation from a hyperpolarized potential. This burst mode would partially uncouple visual input from spike output and reduce the information spikes convey about gradations in visual input. However, past observations of T-type-driven bursts may have resulted from unnaturally high membrane excitability. By mimicking natural patterns of synaptic conductance that occur during vision, we found that T-type channels in rat brain slices did not cause bursts, but rather enabled retinogeniculate excitation to cause spikes despite sustained hyperpolarization, thereby restoring the homeostatic input-output relation observed at depolarized potentials. Our results suggest that T-type channels help to maintain a single optimal mode of transmission rather than creating a second mode. In addition, our results provide evidence for the general theory, which seeks to predict the properties of a neuron’s ion channels and synapses given knowledge of natural patterns of synaptic input.

  13. The net employment impact of energy transition in France: An input-output analysis of the 'negaWatt' scenario

    International Nuclear Information System (INIS)

    Quirion, Philippe

    2013-04-01

    We study the impact on employment in France of the implementation of the energy transition scenario built by negaWatt (2011), which provides a massive development of energy savings (through measures of sufficiency and energy efficiency) and renewable energy between 2012 and 2050. Compared to 2010, this scenario results in a halving of CO 2 emissions from energy sources in France in 2030 and a division by 16 in 2050, without capture and storage of CO 2 , without implementation of new nuclear power plant and closing existing plants after 40 years of operation at maximum. We calculate the effect on employment of the implementation of this scenario compared to a baseline scenario that extends recent developments and considers the policies already decided. The method used to calculate the effect on employment of each scenario is to calculate the cost of the main technical and organizational options used, to allocate these costs among the 118 branches of the French economy and multiply these costs by the employment content of each branch. The latter is estimated by input-output analysis, which enables the recording of jobs generated by the production of all inputs. One of two scenarios being more expensive than the other, one must take into account the negative effect on employment of funding such costs. For this, it is assumed that this additional cost is borne by households and that they decrease their consumption accordingly by the same amount. This avoids biasing the results in favour of the most expensive scenario. The implementation of negaWatt scenario leads to a positive effect on employment, on the order of 240 000 full-time equivalent jobs in 2020 and 630,000 in 2030. We study the sensitivity of results to assumptions on prices of imported energy, the evolution of labour productivity, the distribution of costs between households and governments, and finally the consumption-savings decision. The effect on employment is largely positive in all cases. (author)

  14. The impact of peak oil on tourism in Spain: An input-output analysis of price, demand and economy-wide effects

    NARCIS (Netherlands)

    Logar, I.; van den Bergh, J.C.J.M.

    2013-01-01

    This article examines the potential effects of peak oil on Spanish tourism and indirectly on the rest of the economy. We construct several scenarios of price increases in oil, related fossil fuels and their inflationary effects. These scenarios provide the context for an input-output (I/O) analysis

  15. Value-Addes Tax and Shadow Economy : the Role of Input-Output Linkages (revision of CentER Discussion Paper 2013-036)

    NARCIS (Netherlands)

    Hoseini, Mohammad

    2015-01-01

    Under the VAT, formal traders report their purchases to the administration for a deduction in their VAT bill. This paper models this third-party reporting feature of the VAT in an input-output economy and quantifies it among different activities using a forward linkages index. The administration can

  16. Politiques agricoles et structures agro-industrielles: une approche à partir des tableaux input-output chiliens

    Directory of Open Access Journals (Sweden)

    1992-01-01

    Full Text Available La volonté de certaines grandes puissances agro-exportatrices mondiales de libéraliser les échanges internationaux agro-alimentaires pour accélérer la croissance économique et optimiser l’utilisation des facteurs productifs, s’oppose aux politiques protectionnistes et régulationnistes en vigueur dans bon nombre de pays où l’agriculture doit remplir d’autres fonctions que la seule production de biens consommables ou exportables : autosuffisance ou sécurité alimentaire, équilibre de l’emploi, gestion de l’espace, développement industriel. Développement intégré ou recentrage des modes de produire autour d’un nombre réduit de filières de production, tel est, à notre sens, le véritable enjeu du nouvel ordre international en matière agricole. L’objectif de cette communication est de proposer - à partir de l’analyse des tableaux input-output nationaux et à titre prospectif - une méthode permettant de mettre en regard les échanges extérieurs et la structure interne des systèmes agro-alimentaires. On fait l’hypothèse que l’application indiscriminée de politiques libérales - agro-export led notamment - conduit à l’uniformisation des techniques, la spécialisation des agricultures et des filières de production et débouche à terme sur l’extraversion de l’économie. Un protectionnisme bien orienté conduit, au contraire, à la diversification des productions et des échanges inter-industriels et contribue à l’essor de complexes agro-industriels favorables à la diffusion du progrès technique et l’internationalisation des fruits de la croissance agricole. L’analyse du cas chilien, sur longue période, est particulièrement caractéristique à cet égard. Les nouvelles politiques néolibérales d’industrialisation basées sur l’agro-exportation mises en œuvre après 1973, ayant abouti à une brusque déstructuration du système agro-alimentaire de ce pays. POLÍTICAS AGRÍCOLAS Y ESTRUCTURAS

  17. An extended environmental input-output lifecycle assessment model to study the urban food-energy-water nexus

    Science.gov (United States)

    Sherwood, John; Clabeaux, Raeanne; Carbajales-Dale, Michael

    2017-10-01

    We developed a physically-based environmental account of US food production systems and integrated these data into the environmental-input-output life cycle assessment (EIO-LCA) model. The extended model was used to characterize the food, energy, and water (FEW) intensities of every US economic sector. The model was then applied to every Bureau of Economic Analysis metropolitan statistical area (MSA) to determine their FEW usages. The extended EIO-LCA model can determine the water resource use (kGal), energy resource use (TJ), and food resource use in units of mass (kg) or energy content (kcal) of any economic activity within the United States. We analyzed every economic sector to determine its FEW intensities per dollar of economic output. This data was applied to each of the 382 MSAs to determine their total and per dollar of GDP FEW usages by allocating MSA economic production to the corresponding FEW intensities of US economic sectors. Additionally, a longitudinal study was performed for the Los Angeles-Long Beach-Anaheim, CA, metropolitan statistical area to examine trends from this singular MSA and compare it to the overall results. Results show a strong correlation between GDP and energy use, and between food and water use across MSAs. There is also a correlation between GDP and greenhouse gas emissions. The longitudinal study indicates that these correlations can shift alongside a shifting industrial composition. Comparing MSAs on a per GDP basis reveals that central and southern California tend to be more resource intensive than many other parts of the country, while much of Florida has abnormally low resource requirements. Results of this study enable a more complete understanding of food, energy, and water as key ingredients to a functioning economy. With the addition of the food data to the EIO-LCA framework, researchers will be able to better study the food-energy-water nexus and gain insight into how these three vital resources are interconnected

  18. Economic interrelationships and impacts of the aviation/aerospace industry in the state of Florida using input-output analysis

    Science.gov (United States)

    Whealan George, Kelly

    The study provided a detailed description of the interrelatedness of the aviation and aerospace industry with principal industries in Florida and Volusia County (VC) using Input-Output (IO) analysis. Additionally, this research provided an economic impact analysis of the creation of a university research park in Daytona Beach (DB). The economic impact measures included not only direct economic output and industry employment descriptions but also described the multiplier effects in the form of indirect and induced impacts using data for 2012. This research concluded the average labor income of the aviation and aerospace industry was higher than average labor income in Florida and VC. A substantive difference between the Florida and VC average labor income for the aviation and aerospace industry existed because VC's aerospace sector was only concentrated in the search, detection, and navigation instruments manufacturing sector. VC's transport by air sector was one-fifth the size of Florida's. Differences in the aviation and aerospace industry composition between Florida and VC are important because the economic impacts from a shock to the entire aviation and aerospace industry will be distributed differently. Since the aviation and aerospace average labor income is higher than the average labor income in Florida and VC, it would be a positive move for Florida's economy to attract and grow the aviation and aerospace industry. It would be highly unlikely that the entirety of newly created jobs would be resourced from the local population. Nonetheless, growing the aviation and aerospace industry jobs would have a positive influence on the region's economy and tax revenues. It would be a desirable course of action to spur the growth of this sector, as its direct effect would culminate with additional jobs in Florida that would bring higher wage jobs to the state. The interdependencies of the aviation and aerospace industry in Florida and VC with other industries had a

  19. Changes in the Compressive Nonlinearity of the Cochlea During Early Aging: Estimates From Distortion OAE Input/Output Functions.

    Science.gov (United States)

    Ortmann, Amanda J; Abdala, Carolina

    2016-01-01

    The level-dependent growth of distortion product otoacoustic emissions (DPOAEs) provides an indirect metric of cochlear compressive nonlinearity. Recent evidence suggests that aging reduces nonlinear distortion emissions more than those associated with linear reflection. Therefore, in this study, we generate input/output (I/O) functions from the isolated distortion component of the DPOAE to probe the effects of early aging on the compressive nonlinearity of the cochlea. Thirty adults whose ages ranged from 18 to 64 years participated in this study, forming a continuum of young to middle-age subjects. When necessary for analyses, subjects were divided into a young-adult group with a mean age of 21 years, and a middle-aged group with a mean age of 52 years. All young-adult subjects and 11 of the middle-aged subjects had normal hearing; 4 middle-aged ears had slight audiometric threshold elevation at mid-to-high frequencies. DPOAEs (2f1 - f2) were recorded using primary tones swept upward in frequency from 0.5 to 8 kHz, and varied from 25 to 80 dB sound pressure level. The nonlinear distortion component of the total DPOAE was separated and used to create I/O functions at one-half octave intervals from 1.3 to 7.4 kHz. Four features of OAE compression were extracted from a fit to these functions: compression threshold, range of compression, compression slope, and low-level growth. These values were compared between age groups and correlational analyses were conducted between OAE compression threshold and age with audiometric threshold controlled. Older ears had reduced DPOAE amplitude compared with young-adult ears. The OAE compression threshold was elevated at test frequencies above 2 kHz in the middle-aged subjects by 19 dB (35 versus 54 dB SPL), thereby reducing the compression range. In addition, middle-aged ears showed steeper amplitude growth beyond the compression threshold. Audiometric threshold was initially found to be a confound in establishing the

  20. Algunas consideraciones sobre el análisis input-output de descomposición estructural aplicado a los casos de Andalucía y Madrid

    Directory of Open Access Journals (Sweden)

    José Manuel Rueda Cantuche

    2000-01-01

    Full Text Available El proceso de comparación estructural de una economía a través de la cantidad absoluta de valor añadido y del empleo nos arroja una serie de interrogantes sobre las distintas fuentes de variaciones estructurales en los procesos productivos a nivel sectorial entre dos regiones distintas. El análisis input-output de descomposición estructural estudia dichas fuentes a partir de cuatro diferentes tipos de orígenes: la diferencia de procesos tecnológicos, la demanda final interior, el comercio exterior y la productividad del trabajo. En nuestro documento pretendemos arrojar cierta luz sobre las diferencias estructurales entre regiones caracterizadas por economías de aglomeración Madrid y regiones menos desarrolladas (Andalucía a la luz del análisis input-output.

  1. Trade

    OpenAIRE

    Chapman, Bert

    2014-01-01

    Provides a historical overview of analysis of U.S. foreign trade policy during the early decades of the country's history. Examines bilateral U.S. trade relations with France and Great Britain, provides import and export statistics, details on commodities and products imports and exported, trade statistics, and information on the political and economic factors shaping U.S. trade during this period.

  2. Aplicación de la teoría de grafos al análisis input-output: Andalucía 1995

    Directory of Open Access Journals (Sweden)

    José Antonio Ordaz Sanz

    2000-01-01

    Full Text Available La Economía Aplicada contemporánea resultaría impensable sin el análisis input-output, por su contribución decisiva al conocimiento de las actividades económicas de los países y a la armonización de sus cuentas. Muchas de las políticas sociales y económicas que se llevan a cabo en nuestros días residen en sus fundamentos, y su aplicación resulta esencial en infinidad de campos: contabilidad nacional y regional, comercio, empleo, desarrollo tecnológico, medio ambiente, ... Las Tablas Input-Output de Andalucía de 1995 constituyen un buen exponente actual de la preocupación de los poderes públicos por conocer con el mayor detalle posible la realidad de la actividad económica de sus ámbitos territoriales, lo que contribuye en gran medida a facilitar la toma de decisiones. El análisis matricial y el establecimiento de condiciones destinadas a asegurar la resolución de sistemas de ecuaciones lineales de soluciones no negativas conforman, sin lugar a dudas, la base sobre la que se ha desarrollado el modelo input-output. Sin embargo, no tienen por qué ser la única. La Teoría de grafos se está revelando de forma creciente como una herramienta cada vez más útil en el estudio de problemas de carácter económico, siendo precisamente las tablas input-output uno de los principales ejemplos de ello.

  3. Waste Isolation Pilot Plant environmental impact report: an outline of the input--output model and the impact projections methodology. Technical document, socioeconomic portion

    International Nuclear Information System (INIS)

    1978-07-01

    A static model in the form of a regional input-output model was constructed for Eddy and Lea Counties, New Mexico. Besides the WIPP project, the model was also used for several other projects to determine the economic impact of proposed new facilities and developments. Both private and public sectors are covered. Sub-sectors for WIPP below-ground construction, above-ground construction, and operation and transport are included

  4. Value-Addes Tax and Shadow Economy: the Role of Input-Output Linkages (revision of CentER Discussion Paper 2013-036)

    OpenAIRE

    Hoseini, Mohammad

    2015-01-01

    Under the VAT, formal traders report their purchases to the administration for a deduction in their VAT bill. This paper models this third-party reporting feature of the VAT in an input-output economy and quantifies it among different activities using a forward linkages index. The administration can reduce the size of shadow economy by reallocating visiting audits to backwardly linked activities and cross-checking VAT payments with input credit claims in forwardly linked activities. Empirical...

  5. Analysis of inter-country input-output table based on bibliographic coupling network: How industrial sectors on the GVC compete for production resources

    Science.gov (United States)

    Guan, Jun; Xu, Xiaoyu; Xing, Lizhi

    2018-03-01

    The input-output table is comprehensive and detailed in describing national economic systems with abundance of economic relationships depicting information of supply and demand among industrial sectors. This paper focuses on how to quantify the degree of competition on the global value chain (GVC) from the perspective of econophysics. Global Industrial Strongest Relevant Network models are established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output (ICIO) tables and then have them transformed into Global Industrial Resource Competition Network models to analyze the competitive relationships based on bibliographic coupling approach. Three indicators well suited for the weighted and undirected networks with self-loops are introduced here, including unit weight for competitive power, disparity in the weight for competitive amplitude and weighted clustering coefficient for competitive intensity. Finally, these models and indicators were further applied empirically to analyze the function of industrial sectors on the basis of the latest World Input-Output Database (WIOD) in order to reveal inter-sector competitive status during the economic globalization.

  6. Input-output method to fault detection for discrete-time fuzzy networked systems with time-varying delay and multiple packet losses

    Science.gov (United States)

    Wang, Shenquan; Feng, Jian; Jiang, Yulian

    2016-05-01

    The fault detection (FD) problem for discrete-time fuzzy networked systems with time-varying delay and multiple packet losses is investigated in this paper. The communication links between the plant and the FD filter (FDF) are assumed to be imperfect, and the missing probability is governed by an individual random variable satisfying a certain probabilistic distribution over the interval [0 1]. The discrete-time delayed fuzzy networked system is first transformed into the form of interconnect ion of two subsystems by applying an input-output method and a two-term approximation approach, which are employed to approximate the time-varying delay. Our attention is focused on the design of fuzzy FDF (FFDF) such that, for all data missing conditions, the overall FD dynamics are input-output stable in mean square and preserves a guaranteed performance. Sufficient conditions are first established via H∞ performance analysis for the existence of the desired FFDF; meanwhile, the corresponding solvability conditions for the desired FFDF gains are characterised in terms of the feasibility of a convex optimisation problem. Moreover, we show that the obtained criteria based on the input-output approach can also be established by applying the direct Lyapunov method to the original time-delay systems. Finally, simulation examples are provided to demonstrate the effectiveness of the proposed approaches.

  7. Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain.

    Directory of Open Access Journals (Sweden)

    Lizhi Xing

    Full Text Available The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization.

  8. Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain.

    Science.gov (United States)

    Xing, Lizhi

    2017-01-01

    The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization.

  9. Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain

    Science.gov (United States)

    2017-01-01

    The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization. PMID:28873432

  10. Handbook of serial communications interfaces a comprehensive compendium of serial digital input/output (I/O) standards

    CERN Document Server

    Frenzel, Louis

    2015-01-01

    This book catalogs the most popular and commonly used serial-port interfaces and provides details on the specifications and the latest standards, enabling you to select an interface for a new design or verify that an interface is working correctly. Each chapter is based on a different interface and is written in an easy to follow, standard format. With this book you will learn: The most widely used serial interfacesHow to select the best serial interface for a specific application or designThe trade-offs between data rate and distance (length or range)The operation and benefits of serial

  11. Thermally-fluctuated single-flux-quantum pulse intervals reflected in input-output characteristics of a double-flux-quantum amplifier

    Science.gov (United States)

    Mizugaki, Yoshinao; Urai, Yoshiaki; Shimada, Hiroshi

    2017-07-01

    A double-flux-quantum amplifier (DFQA) is a voltage multiplier of quantum accuracy, which we have employed at the final stage of a single-flux-quantum (SFQ) digital-to-analog converter (DAC). We recently found that experimental input-output (IO) characteristics of DFQAs were always slightly different from numerical results assuming ideally-periodic SFQ pulse trains. That is, experimental IO characteristics obtained using an over-biasing method were gradually deteriorated near their maximum operation voltages. Numerical simulation including the over-biasing method at a finite temperature suggested that the difference was likely to be attributed to thermally-fluctuated intervals of input SFQ pulses.

  12. Biodiesel and employment and income generation: an analysis of input-output; Biodiesel e geracao de emprego e renda: uma analise de insumo-produto

    Energy Technology Data Exchange (ETDEWEB)

    Lucena, Thomas Krisp de; Young, Carlos Eduardo Frickmann [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Dept. de Economia], e-mail: thomaskl@ig.com.br

    2008-07-01

    This article analysis the National Program of Biodiesel Production, and presents a methodology to estimate the direct and indirect effects of employment and wages generation using the Input-Output Model developed by Leontief. Four different simulations are carried out, but even in the most optimistic case, the results presented by the Government exceed considerably the estimates obtained using data from the Brazilian national accounts. The main recommendation is that these estimates need to be redone, in order to present more realistic expectations for the job and income generation from the expansion of the bio diesel. (author)

  13. Effects of a carbon price in the U.S. on economic sectors, resource use, and emissions: An input-output approach

    International Nuclear Information System (INIS)

    Choi, Jun-Ki; Bakshi, Bhavik R.; Haab, Timothy

    2010-01-01

    Despite differences in their implementation, most carbon policies aim to have similar outcomes: effectively raising the price of carbon-intensive products relative to non-carbon-intensive products. While it is possible to predict the simple broad-scale economic impacts of raising the price of carbon-intensive products-the demand for non-carbon-intensive products will increase-understanding the economic and environmental impacts of carbon policies throughout the life cycle of both types of products is more difficult. Using the example of a carbon tax, this study proposes a methodology that integrates short-term policy-induced consumer demand changes into the input-output framework to analyze the environmental and economic repercussions of a policy. Environmental repercussions include the direct and the indirect impacts on emissions, materials flow in the economy, and the reliance on various ecosystem goods and services. The approach combines economic data with data about physical flow of fossil fuels between sectors, consumption of natural resources and emissions from each sector. It applies several input-output modeling equations sequentially and uses various levels of aggregation/disaggregation. It is illustrated with the data for the 2002 U.S. economy and physical flows. The framework provides insight into the short-term complex interactions between carbon price and its economic and environmental effects.

  14. Production and consumption of non-fuel minerals to the year 2030 analyzed within an input-output framework of the US and world economy (techniques for consistent forecasting of future demand for major minerals using an input-output framework)

    Energy Technology Data Exchange (ETDEWEB)

    Leontief, W.; Koo, J.; Nasar, S.; Sohn, I.

    1982-06-01

    A study was undertaken to project a set of future production and consumption levels of 26 major non-fuel minerals for the U.S. and the world economy to the year 2030. Alternative assumptions regarding future U.S. and world economic growth and structural change are discussed. The main methodological tools used in the study were the 1972 Input-Output Table of the U.S. Economy and a revised version of the U.N. World Input-Output Model. Discussions of the role of resources in the economy, a review of past U.S. minerals policies, and a summary of previous studies undertaken to project future minerals requirements are included. Problems of potential resource imbalances are addressed.

  15. The spatial and temporal `cost' of volcanic eruptions: assessing economic impact, business inoperability, and spatial distribution of risk in the Auckland region, New Zealand

    Science.gov (United States)

    McDonald, Garry W.; Smith, Nicola J.; Kim, Joon-hwan; Cronin, Shane J.; Proctor, Jon N.

    2017-07-01

    Volcanic risk assessment has historically concentrated on quantifying the frequency, magnitude, and potential diversity of physical processes of eruptions and their consequent impacts on life and property. A realistic socio-economic assessment of volcanic impact must however take into account dynamic properties of businesses and extend beyond only measuring direct infrastructure/property loss. The inoperability input-output model, heralded as one of the 10 most important accomplishments in risk analysis over the last 30 years (Kujawaski Syst Eng. 9:281-295, 2006), has become prominent over the last decade in the economic impact assessment of business disruptions. We develop a dynamic inoperability input-output model to assess the economic impacts of a hypothetical volcanic event occurring at each of 7270 unique spatial locations throughout the Auckland Volcanic Field, New Zealand. This field of at least 53 volcanoes underlies the country's largest urban area, the Auckland region, which is home to 1.4 million people and responsible for 35.3% (NZ201481.2 billion) of the nation's GDP (Statistics New Zealand 2015). We apply volcanic event characteristics for a small-medium-scale volcanic eruption scenario and assess the economic impacts of an `average' eruption in the Auckland region. Economic losses are quantified both with, and without, business mitigation and intervention responses in place. We combine this information with a recent spatial hazard probability map (Bebbington and Cronin Bull Volcanol. 73(1):55-72, 2011) to produce novel spatial economic activity `at risk' maps. Our approach demonstrates how business inoperability losses sit alongside potential life and property damage assessment in enhancing our understanding of volcanic risk mitigation.

  16. Percutaneous cryotherapy for inoperable lung malignancy

    Energy Technology Data Exchange (ETDEWEB)

    Park, Eun Hae; Jin, Gong Yong; Han, Young Min; Lee, Yong Chul; Kwon, Keun Sang [Chonbuk National Univ. Medical School and Hospital, Jeonju, (Korea, Republic of)

    2012-05-15

    To evaluate the therapeutic efficacy of percutaneous cryotherapy for inoperable patients with malignant pulmonary nodules. We enrolled 14 patients (7 males, 7 females, average age 68.8 years) who had inoperable lung malignancy in this study from August 2006 through July 2009. We evaluated the therapeutic efficacy of cryotherapy for complete or incomplete ablation by follow up chest CT. Using Kaplan Meier statistical methods, we estimated the survival of patients who had undergone cryotherapy and we investigated post cryotherapy complications. Five of the 14 patients underwent complete ablation (35.7%), while 9 of 14 patients underwent incomplete ablation (64.3%). The change in mean size before procedure and at last follow up CT in the complete and incomplete ablation were as follows: 13.2 {+-} 7.6 mm {yields} 3.8 {+-} 2.7 mm, and 18.1 {+-} 6.2 mm {yields} 33.7 {+-} 17.9 mm, respectively. The median survival of patients in the complete and the incomplete groups were 51.5 months and 24 months, respectively. One patient developed a small pneumothorax, which resolved spontaneously. Two patients developed hemoptysis after the procedure, which was controlled within a day. Percutaneous cryotherapy may be an effective and safe therapeutic method for inoperable patients with malignant pulmonary nodules.

  17. Percutaneous cryotherapy for inoperable lung malignancy

    International Nuclear Information System (INIS)

    Park, Eun Hae; Jin, Gong Yong; Han, Young Min; Lee, Yong Chul; Kwon, Keun Sang

    2012-01-01

    To evaluate the therapeutic efficacy of percutaneous cryotherapy for inoperable patients with malignant pulmonary nodules. We enrolled 14 patients (7 males, 7 females, average age 68.8 years) who had inoperable lung malignancy in this study from August 2006 through July 2009. We evaluated the therapeutic efficacy of cryotherapy for complete or incomplete ablation by follow up chest CT. Using Kaplan Meier statistical methods, we estimated the survival of patients who had undergone cryotherapy and we investigated post cryotherapy complications. Five of the 14 patients underwent complete ablation (35.7%), while 9 of 14 patients underwent incomplete ablation (64.3%). The change in mean size before procedure and at last follow up CT in the complete and incomplete ablation were as follows: 13.2 ± 7.6 mm → 3.8 ± 2.7 mm, and 18.1 ± 6.2 mm → 33.7 ± 17.9 mm, respectively. The median survival of patients in the complete and the incomplete groups were 51.5 months and 24 months, respectively. One patient developed a small pneumothorax, which resolved spontaneously. Two patients developed hemoptysis after the procedure, which was controlled within a day. Percutaneous cryotherapy may be an effective and safe therapeutic method for inoperable patients with malignant pulmonary nodules

  18. Comparing urban solid waste recycling from the viewpoint of urban metabolism based on physical input-output model: A case of Suzhou in China.

    Science.gov (United States)

    Liang, Sai; Zhang, Tianzhu

    2012-01-01

    Investigating impacts of urban solid waste recycling on urban metabolism contributes to sustainable urban solid waste management and urban sustainability. Using a physical input-output model and scenario analysis, urban metabolism of Suzhou in 2015 is predicted and impacts of four categories of solid waste recycling on urban metabolism are illustrated: scrap tire recycling, food waste recycling, fly ash recycling and sludge recycling. Sludge recycling has positive effects on reducing all material flows. Thus, sludge recycling for biogas is regarded as an accepted method. Moreover, technical levels of scrap tire recycling and food waste recycling should be improved to produce positive effects on reducing more material flows. Fly ash recycling for cement production has negative effects on reducing all material flows except solid wastes. Thus, other fly ash utilization methods should be exploited. In addition, the utilization and treatment of secondary wastes from food waste recycling and sludge recycling should be concerned. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. Quantum input-output theory for optical cavities with arbitrary coupling strength: Application to two-photon wave-packet shaping

    Science.gov (United States)

    Raymer, M. G.; McKinstrie, C. J.

    2013-10-01

    We develop quantum-optical input-output theory for resonators with arbitrary coupling strength, and for input fields whose spectrum can be wider than the cavity free-spectral range, while ensuring that the field-operator commutator relations in space-time variables are correct. The cavity-field commutator exhibits a series of space-time “echoes,” representing causal connections of certain space-time points by light propagation. We apply the theory to two-photon wave-packet shaping by cavity reflection, which displays a remarkable illustration of dispersion cancellation. We also show that the theory is amenable to inclusion of intracavity absorbing and emitting atoms, allowing, for example, dissipative losses within the cavity to be incorporated in a quantum mechanically correct way.

  20. Evaluation of input output efficiency of oil field considering undesirable output —A case study of sandstone reservoir in Xinjiang oilfield

    Science.gov (United States)

    Zhang, Shuying; Wu, Xuquan; Li, Deshan; Xu, Yadong; Song, Shulin

    2017-06-01

    Based on the input and output data of sandstone reservoir in Xinjiang oilfield, the SBM-Undesirable model is used to study the technical efficiency of each block. Results show that: the model of SBM-undesirable to evaluate its efficiency and to avoid defects caused by traditional DEA model radial angle, improve the accuracy of the efficiency evaluation. by analyzing the projection of the oil blocks, we find that each block is in the negative external effects of input redundancy and output deficiency benefit and undesirable output, and there are greater differences in the production efficiency of each block; the way to improve the input-output efficiency of oilfield is to optimize the allocation of resources, reduce the undesirable output and increase the expected output.

  1. A Self-Reconfigurable Platform for the Implementation of 2D Filterbanks with Real and Complex-Valued Inputs, Outputs, and Filter Coefficients

    Directory of Open Access Journals (Sweden)

    Daniel Llamocca

    2014-01-01

    Full Text Available We introduce a dynamically reconfigurable 2D filterbank that supports both real and complex-valued inputs, outputs, and filter coefficients. This general purpose filterbank allows for the efficient implementation of 2D filterbanks based on separable 2D FIR filters that support all possible combinations of input and output signals. The system relies on the use of dynamic reconfiguration of real/complex one-dimensional filters to minimize the required hardware resources. The system is demonstrated using an equiripple and a Gabor filterbank and the results using both real and complex-valued input images. We summarize the performance of the system in terms of the required processing times, energy, and accuracy.

  2. Stability Analysis and Stabilization of T-S Fuzzy Delta Operator Systems with Time-Varying Delay via an Input-Output Approach

    Directory of Open Access Journals (Sweden)

    Zhixiong Zhong

    2013-01-01

    Full Text Available The stability analysis and stabilization of Takagi-Sugeno (T-S fuzzy delta operator systems with time-varying delay are investigated via an input-output approach. A model transformation method is employed to approximate the time-varying delay. The original system is transformed into a feedback interconnection form which has a forward subsystem with constant delays and a feedback one with uncertainties. By applying the scaled small gain (SSG theorem to deal with this new system, and based on a Lyapunov Krasovskii functional (LKF in delta operator domain, less conservative stability analysis and stabilization conditions are obtained. Numerical examples are provided to illustrate the advantages of the proposed method.

  3. Analyzing the impacts of final demand changes on total output using input-output approach: The case of Japanese ICT sectors

    International Nuclear Information System (INIS)

    Zuhdi, Ubaidillah

    2014-01-01

    The purpose of this study is to analyze the impacts of final demand changes on total output of Japanese Information and Communication Technologies (ICT) sectors in future time. This study employs one of analysis tool in Input-Output (IO) analysis, demand-pull IO quantity model, in achieving the purpose. There are three final demand changes used in this study, namely (1) export, (2) import, and (3) outside households consumption changes. This study focuses on ''pure change'' condition, the condition that final demand changes only appear in analyzed sectors. The results show that export and outside households consumption modifications give positive impact while opposite impact could be seen in import change

  4. Comparative performance of decoupled input-output linearizing controller and linear interpolation PID controller: enhancing biomass and ethanol production in Saccharomyces cerevisiae.

    Science.gov (United States)

    Persad, A; Chopda, V R; Rathore, A S; Gomes, J

    2013-02-01

    A decoupled input-output linearizing controller (DIOLC) was designed as an alternative advanced control strategy for controlling bioprocesses. Simulation studies of its implementation were carried out to control ethanol and biomass production in Saccharomyces cerevisiae and its performance was compared to that of a proportional-integral-derivative (PID) controller with parameters tuned according to a linear schedule. The overall performance of the DIOLC was better in the test experiments requiring the controllers to respond accurately to simultaneous changes in the trajectories of the substrate and dissolved oxygen concentration. It also exhibited better performance in perturbation experiments of the most significant parameters q (S,max), q (O2,max), and k ( s ), determined through a statistical design of experiments involving 730 simulations. DIOLC exhibited a superior ability of constraining the process when implemented in extreme metabolic regimes of high oxygen demand for maximizing biomass concentration and low oxygen demand for maximizing ethanol concentration.

  5. Dynamic modeling and simulation of an induction motor with adaptive backstepping design of an input-output feedback linearization controller in series hybrid electric vehicle

    Directory of Open Access Journals (Sweden)

    Jalalifar Mehran

    2007-01-01

    Full Text Available In this paper using adaptive backstepping approach an adaptive rotor flux observer which provides stator and rotor resistances estimation simultaneously for induction motor used in series hybrid electric vehicle is proposed. The controller of induction motor (IM is designed based on input-output feedback linearization technique. Combining this controller with adaptive backstepping observer the system is robust against rotor and stator resistances uncertainties. In additional, mechanical components of a hybrid electric vehicle are called from the Advanced Vehicle Simulator Software Library and then linked with the electric motor. Finally, a typical series hybrid electric vehicle is modeled and investigated. Various tests, such as acceleration traversing ramp, and fuel consumption and emission are performed on the proposed model of a series hybrid vehicle. Computer simulation results obtained, confirm the validity and performance of the proposed IM control approach using for series hybrid electric vehicle.

  6. Estimation of the contribution of exports to the provincial economy: an analysis based on China's multi-regional input-output tables.

    Science.gov (United States)

    Wu, Sanmang; Li, Shantong; Lei, Yalin

    2016-01-01

    This paper developed an estimation model for the contribution of exports to a country's regional economy based on the Chenery-Moses model and conducted an empirical analysis using China's multi-regional input-output tables for 1997, 2002, and 2007. The results indicated that China's national exports make significantly different contributions to the provincial economy in various regions, with the greatest contribution being observed in the eastern region and the smallest in the central region. The provinces are also subjected to significantly different export spillover effects. The boosting effect for the eastern provinces is primarily generated from local exports, whereas the western provinces primarily benefit from the export spillover effect from the eastern provinces. The eastern provinces, such as Guangdong, Zhejiang, Jiangsu, and Shanghai, are the primary sources of export spillover effects, and Guangdong is the largest source of export spillover effects for almost all of the provinces in China.

  7. GAMBARAN UMUM SEKTOR UNGGULAN DAN KONTRIBUSI SEKTOR PERTANIAN DI PROVINSI JAWA TIMUR (OLAH DATA TABEL INPUT-OUTPUT PROVINSI JAWA TIMUR TAHUN 2010

    Directory of Open Access Journals (Sweden)

    Azizatun Nurhayati

    2015-10-01

    Full Text Available Pembangunan daerah dilakukan dengan memaksimalkan potensi sumber daya yang ada di suatu daerah. Karena sebagian besar penduduk Indonesia adalah petani, maka penting untuk mengetahui kontribusi sektor pertanian terhadap perekonomian suatu daerah. Makalah ini bertujuan untuk mengetahui kontribusi sektor pertanian terhadap multiplier output, pengganda pendapatan, dan pengganda tenaga kerja. Metode yang digunakan dalam penelitian ini adalah Analisis Input Output yang diperoleh dari Badan Pusat Statistik Provinsi Jawa Timur Tahun 2010. Hasil penelitian menunjukkan bahwa komoditas tebu berada pada kuadran II, Dari keseluruhan data di atas maka dapat disimpulkan bahwa (1 Komoditas tebu dapat mendorong berkembangnya industri gula di Jawa Timur, (2 di sektor peternakan, subsektor yang dapat dikembangkan adalah pakan ternak, pemotongan hewan, sapi, kambing dan domba, serta ayam (3 di sektor pengolahan subsektor pengolahan es krim, beras, dan penggilingan padi serta rokok. ABSTRACTLocal development is held by maximizing potential resources in a particular region. In addition, most of Indonesian people are farmers so it’s important to identify the agriculural contribution in local economic. The aim of this study are to study the contribution of agriculture  in ouput multiplier, income multiplier, and employment multiplier. The method which was used in this research was input-output analysis based on Badan Pusat Statistik East Java Province’s data in 2010. From the analysis, we can conclude that the sugarcane was formed in the second quadrant, in which (1sugarcane comodity promoted the sugar industry in East Java Province (2 in livestock subsector, the woof of livestock industry, animals truncation, sheeps, goats, and chicken husbandry (poultry were potentially to be developed (3 in processing subsector which was based on agriculture product, ice cream and processing, rice milling and cigarette were potentially to be developed. 

  8. Changes in input-output relations in the corticospinal pathway to the lower limb muscles during robot-assisted passive stepping.

    Science.gov (United States)

    Kamibayashi, Kiyotaka; Nakajima, Tsuyoshi; Takahashi, Makoto; Nakazawa, Kimitaka

    2011-01-01

    We investigated input (stimulus)-output (response) relations of the corticospinal pathway in the lower limb muscles during passive stepping using a robotic driven gait orthosis. Nine healthy adult subjects passively stepped with 40% body weight unloading (ground stepping) and 100% body weight unloading in the air (air stepping). During passive stepping, the motor evoked potentials (MEPs) of the lower limb muscles elicited by transcranial magnetic stimulation (TMS) were recorded at late-stance, early-, and late-swing phases of 2 stepping conditions. The input-output relation at each phase of the stepping conditions was obtained by increasing stimulus intensity in 5% increments from 40% to 70% of maximal stimulator output. The slopes of input-output relations were steeper at the early-swing phase in the rectus femoris muscle and at the late-stance and late-swing phases in the biceps femoris muscle in both stepping conditions. There were no significant differences in the MEP responses of the rectus femoris and biceps femoris muscles at each phase between the 2 conditions. Low muscle activity was seen at the late-stance phase of ground stepping in the soleus muscle and the MEP amplitude at this phase became larger. The slopes in the tibialis anterior muscle were steep at the early- and late-swing phases of ground stepping. There was a significant difference in the MEPs of the tibialis anterior muscle between the late-swing phases in ground and air stepping. The present study indicates that corticospinal excitability to the lower limb muscles is modulated by sensory inputs elicited by passive stepping.

  9. Estimating direct and indirect rebound effects by supply-driven input-output model: A case study of Taiwan's industry

    International Nuclear Information System (INIS)

    Wu, Kuei-Yen; Wu, Jung-Hua; Huang, Yun-Hsun; Fu, Szu-Chi; Chen, Chia-Yon

    2016-01-01

    Most existing literature focuses on the direct rebound effect on the demand side for consumers. This study analyses direct and indirect rebound effects in Taiwan's industry from the perspective of producers. However, most studies on the producers' viewpoint may overlook inter-industry linkages. This study applies a supply-driven input-output model to quantify the magnitude of rebound effects by explicitly considering inter-industry linkages. Empirical results showed that total rebound effects for most Taiwan's sectors were less than 10% in 2011. A comparison among the sectors yields that sectors with lower energy efficiency had higher direct rebound effects, while sectors with higher forward linkages generated higher indirect rebound effects. Taking the Mining sector (S3) as an example, which is an upstream supplier and has high forward linkages; it showed high indirect rebound effects that are derived from the accumulation of additional energy consumption by its downstream producers. The findings also showed that in almost all sectors, indirect rebound effects were higher than direct rebound effects. In other words, if indirect rebound effects are neglected, the total rebound effects will be underestimated. Hence, the energy-saving potential may be overestimated. - Highlights: • This study quantifies rebound effects by a supply-driven input-output model. • For most Taiwan's sectors, total rebound magnitudes were less than 10% in 2011. • Direct rebound effects and energy efficiency were inverse correlation. • Indirect rebound effects and industrial forward linkages were positive correlation. • Indirect rebound effects were generally higher than direct rebound effects.

  10. Praxis input/output interface

    International Nuclear Information System (INIS)

    Shapiro, R.E.; Evans, A. Jr.

    1981-01-01

    This document is intended as an introduction to the use of RMS facilities via Praxis (this interface hereafter called Praxis-RMS). It is presumed that the reader is familiar with Praxis conventions as well as with RMS use (at the MACRO level). Since Praxis-RMS was designed to be functionally equivalent to MACRO-RMS, the explanations follow the pattern of the DEC MACRO-RMS documentation (particularly the programmer's reference manual). A complete list of the procedures that make up Praxis-RMS appears at the end of this document (with parameters), along with the constants (grouped by type) that can be used as actual parameters

  11. Interface Input/Output Automata

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

    2006-01-01

    Building on the theory of interface automata by de Alfaro and Henzinger we design an interface language for Lynch’s I/O, a popular formalism used in the development of distributed asynchronous systems, not addressed by previous interface research. We introduce an explicit separation of assumptions...... a method for solving systems of relativized behavioral inequalities as used in our setup and draw a formal correspondence between our work and interface automata....

  12. Organization environmental footprint applying a multi-regional input-output analysis: A case study of a wood parquet company in Spain.

    Science.gov (United States)

    Martinez, Sara; Marchamalo, Miguel; Alvarez, Sergio

    2018-03-15

    Wood has been presented as a carbon-neutral material capable of significantly contribute to climate change mitigation and has become an appealing option for the building sector. This paper presents the quantification of the organization environmental footprint of a wood parquet company. The multi-regional input-output (MRIO) database EXIOBASE was used with a further structural path analysis decomposition. The application of the proposed method quantifies 14 environmental impacts. Highly influential sectors and regions responsible for these impacts are assessed to propose efficient measures. For the parquet company studied, the highest impact category once normalized was ozone depletion and the dominant sector responsible for this impact was the chemical industry from Spain and China. The structural path decomposition related to ozone loss revealed that the indirect impacts embedded in the supply chain are higher than the direct impacts. It can be concluded that the assessment of the organizational environmental footprint can be carried out applying this well-structured and robust method. Its implementation will enable tracking of the environmental burdens through a company's supply chain at a global scale and provide information for the adoption of environmental strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Uncertainty of solute flux estimation in ungauged small streams: potential implications for input-output nutrient mass balances at stream reach scale

    Directory of Open Access Journals (Sweden)

    A. Butturini

    2005-01-01

    Full Text Available Input-output mass balances within stream reaches provide in situ estimates of stream nutrient retention/release under a wide spectrum of hydrological conditions. Providing good estimates of the mass balances for nutrients depends on precise hydrological monitoring and good chemical characterisation of stream water at the input and output ends of the stream reach. There is a need to optimise the hydrological monitoring and the frequencies of water sampling to yield precise annual mass balances, so as to avoid undue cost - high resolution monitoring and subsequent chemical analysis can be labour intensive and costly. In this paper, simulation exercises were performed using a data set created to represent the instantaneous discharge and solute dynamics at the input and output ends of a model stream reach during a one year period. At the output end, stream discharge and water chemistry were monitored continuously, while the input end was assumed to be ungauged; water sampling frequency was changed arbitrarily. Instantaneous discharge at the ungauged sampling point was estimated with an empirical power model linking the discharge to the catchment area (Hooper, 1986. The model thus substitutes for the additional gauge station. Simulations showed that 10 days was the longest chemical sampling interval which could provide reach annual mass balances of acceptable precision. Presently, the relationship between discharge and catchment area is usually assumed to be linear but simulations indicate that small departures from the linearity of this relationship could cause dramatic changes in the mass balance estimations.

  14. Quality- and dilution losses in the recycling of ferrous materials from end-of-life passenger cars: input-output analysis under explicit consideration of scrap quality.

    Science.gov (United States)

    Nakamura, Shinichiro; Kondo, Yasushi; Matsubae, Kazuyo; Nakajima, Kenichi; Tasaki, Tomohiro; Nagasaka, Tetsuya

    2012-09-04

    Metals can in theory be infinitely recycled in a closed-loop without any degradation in quality. In reality, however, open-loop recycling is more typical for metal scrap recovered from end-of-life (EoL) products because mixing of different metal species results in scrap quality that no longer matches the originals. Further losses occur when meeting the quality requirement of the target product requires dilution of the secondary material by adding high purity materials. Standard LCA usually does not address these losses. This paper presents a novel approach to quantifying quality- and dilution losses, by means of hybrid input-output analysis. We focus on the losses associated with the recycling of ferrous materials from end-of-life vehicle (ELV) due to the mixing of copper, a typical contaminant in steel recycling. Given the quality of scrap in terms of copper density, the model determines the ratio by which scrap needs to be diluted in an electric arc furnace (EAF), and the amount of demand for EAF steel including those quantities needed for dilution. Application to a high-resolution Japanese IO table supplemented with data on ferrous materials including different grades of scrap indicates that a nationwide avoidance of these losses could result in a significant reduction of CO(2) emissions.

  15. Comparisons of four categories of waste recycling in China's paper industry based on physical input-output life-cycle assessment model.

    Science.gov (United States)

    Liang, Sai; Zhang, Tianzhu; Xu, Yijian

    2012-03-01

    Waste recycling for paper production is an important component of waste management. This study constructs a physical input-output life-cycle assessment (PIO-LCA) model. The PIO-LCA model is used to investigate environmental impacts of four categories of waste recycling in China's paper industry: crop straws, bagasse, textile wastes and scrap paper. Crop straw recycling and wood utilization for paper production have small total intensity of environmental impacts. Moreover, environmental impacts reduction of crop straw recycling and wood utilization benefits the most from technology development. Thus, using crop straws and wood (including wood wastes) for paper production should be promoted. Technology development has small effects on environmental impacts reduction of bagasse recycling, textile waste recycling and scrap paper recycling. In addition, bagasse recycling and textile waste recycling have big total intensity of environmental impacts. Thus, the development of bagasse recycling and textile waste recycling should be properly limited. Other pathways for reusing bagasse and textile wastes should be explored and evaluated. Moreover, imports of scrap paper should be encouraged to reduce large indirect impacts of scrap paper recycling on domestic environment. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Quantifying the risk of an increase in the prices of non-energy products by combining the portfolio and input-output approaches

    International Nuclear Information System (INIS)

    Suzuki, Kengo; Uchiyama, Yohji

    2010-01-01

    An increase in the price of imported fossil fuels indirectly increases the producer price in non-energy sectors; however, this indirect influence cannot be taken into account by the traditional portfolio approach. This study proposes an analytical framework combining the input-output (I-O) model and the portfolio approach that can take the indirect influence into account. A risk of an increase in the producer price in Japanese non-energy sectors during the period 1970-2000 is estimated, and the causes of a decrease in the risk through the analysis period are clarified by decomposing an index of the risk. The result indicates that almost all non-energy sectors have decreased this risk during the analysis period. The degree and cause of the decrease depends on a sector's location in the hierarchical structure of Japanese industries. For example, assembly sectors have decreased their risk mainly as the result of improvement in energy usage by upstream sectors, such as material sectors, rather than their own improvements. Proper policies considering such a structure are required to decrease the risk further because the effort taken to do so is seldom motivated by economic profit.

  17. Employment impacts of EU biofuels policy. Combining bottom-up technology information and sectoral market simulations in an input-output framework

    Energy Technology Data Exchange (ETDEWEB)

    Neuwahl, Frederik; Mongelli, Ignazio; Delgado, Luis [European Commission, Joint Research Centre, Institute for Prospective Technological Studies (IPTS), Edificio Expo, c/Inca Garcilaso s/n, 41072 Seville (Spain); Loeschel, Andreas [Centre for European Economic Research (ZEW), L7,1, 68161 Mannheim (Germany)

    2008-12-01

    This paper analyses the employment consequences of policies aimed to support biofuels in the European Union. The promotion of biofuel use has been advocated as a means to promote the sustainable use of natural resources and to reduce greenhouse gas emissions originating from transport activities on the one hand, and to reduce dependence on imported oil and thereby increase security of the European energy supply on the other hand. The employment impacts of increasing biofuels shares are calculated by taking into account a set of elements comprising the demand for capital goods required to produce biofuels, the additional demand for agricultural feedstock, higher fuel prices or reduced household budget in the case of price subsidisation, price effects ensuing from a hypothetical world oil price reduction linked to substitution in the EU market, and price impacts on agro-food commodities. The calculations refer to scenarios for the year 2020 targets as set out by the recent Renewable Energy Roadmap. Employment effects are assessed in an input-output framework taking into account bottom-up technology information to specify biofuels activities and linked to partial equilibrium models for the agricultural and energy sectors. The simulations suggest that biofuels targets on the order of 10-15% could be achieved without adverse net employment effects. (author)

  18. The direct and indirect household energy requirements in the Republic of Korea from 1980 to 2000 - An input-output analysis

    International Nuclear Information System (INIS)

    Park, Hi-Chun; Heo, Eunnyeong

    2007-01-01

    As energy conservation can be realized through changes in the composition of goods and services consumed, there is a need to assess indirect and total household energy requirements. The Korean household sector was responsible for about 52% of the national primary energy requirement in the period from 1980 to 2000. Of this total, more than 60% of household energy requirement was indirect. Thus, not only direct but also indirect household energy requirement should be the target of energy conservation policies. Electricity became the main fuel in household energy use in 2000. Households consume more and more electricity intensive goods and services, a sign of increasing living standards. Increases in household consumption expenditure were responsible for a relatively high growth of energy consumption. Switching to consumption of less energy intensive products and decrease in energy intensities of products in 1990s contributed substantially to reduce the increase in the total household energy requirement. A future Korean study should apply a hybrid method as to reduce errors occurred by using uniform (average) prices in constructing energy input-output tables and as to make energy intensities of different years more comparable. (author)

  19. Responses of Lithium-Modified Bath to a Shift in Heat Input/Output Balance and Observation of Freeze-Lining Formation During the Heat Balance Shift

    Science.gov (United States)

    Liu, Jingjing; Taylor, Mark; Dorreen, Mark

    2018-02-01

    In the aluminum electrolysis process, new industrial aluminum/electricity power markets demand a new cell technology to extend the cell heat balance and amperage operating window of smelters by shifting the steady states. The current work investigates the responses of lithium-modified bath system when the input/output balance is shifted in a laboratory analogue to the industrial heat balance shift. Li2CO3 is added to the cryolite-AlF3-CaF2-Al2O3 system as a bath modifier. A freeze deposit is formed on a `cold finger' dipped into the bath and investigated by X-ray diffraction analysis and electron probe X-ray microanalysis. The macro- and micro-structure of the freeze lining varies with the bath superheat (bath temperature minus bath liquidus temperature) and an open crystalline layer with entrapped liquid dominates the freeze thickness. Compared with the cryolite-AlF3-CaF2-Al2O3 bath system, the lithium-modified bath freeze is more sensitive to the heat balance shift. This freeze investigation provides primary information to understand the variation of the side ledge in an industrial cell when the lithium-modified bath system is used.

  20. Analyzing the Effects of the Iranian Energy Subsidy Reform Plan on Short- Run Marginal Generation Cost of Electricity Using Extended Input-Output Price Model

    Directory of Open Access Journals (Sweden)

    Zohreh Salimian

    2012-01-01

    Full Text Available Subsidizing energy in Iran has imposed high costs on country's economy. Thus revising energy prices, on the basis of a subsidy reform plan, is a vital remedy to boost up the economy. While the direct consequence of cutting subsidies on electricity generation costs can be determined in a simple way, identifying indirect effects, which reflect higher costs for input factors such as labor, is a challenging problem. In this paper, variables such as compensation of employees and private consumption are endogenized by using extended Input-Output (I-O price model to evaluate direct and indirect effects of electricity and fuel prices increase on economic subsectors. The determination of the short-run marginal generation cost of electricity using I-O technique with taken into account the Iranian targeted subsidy plan's influences is the main goal of this paper. Marginal cost of electricity, in various scenarios of price adjustment of energy, is estimated for three conventional categories of thermal power plants. Our results show that the raising the price of energy leads to an increase in the electricity production costs. Accordingly, the production costs will be higher than 1000 Rials per kWh until 2014 as predicted in the beginning of the reform plan by electricity suppliers.

  1. [Systemic treatment of inoperable metastasized malignant melanoma].

    Science.gov (United States)

    Gutzmer, R; Rauschenberg, R; Meier, F

    2016-07-01

    The medical therapy of inoperable malignant melanoma has changed dramatically over the last few years. The purpose of this article is to summarize the current state of systemic medical treatment of malignant melanoma. Clinical studies and guidelines in the therapy of malignant melanoma are reviewed. Medical therapy of inoperable melanoma changed due to developments in immunotherapies (checkpoint inhibitors) and molecular-targeted therapies (BRAF and MEK inhibitors). Checkpoint inhibitors are antibodies administered as infusions every 2-3 weeks, blocking the checkpoints PD-1 or CTLA-4, thus, preventing downregulation of the immune system. BRAF and MEK inhibitors are small molecules, they are given orally and block a certain signaling pathway in tumor cells. The activation of this pathway has to be demonstrated by molecular analysis of tumor tissue first. This strategy is currently registered for 40-50 % of melanomas harboring a BRAF V600 mutation, while the combination of a BRAF plus MEK inhibitor has been proven more efficient than a BRAF inhibitor alone. A fascinating development has started in the melanoma field due to immunotherapeutic and molecular-targeted treatment strategies. The continuation of this development needs further clinical and translational studies. This includes particular clinical studies with the new substances in the adjuvant situation, and sequences and combinations in the metastatic setting. Translational studies are needed to develop biomarkers for response and side effects.

  2. Filling the gap in Ca input-output budgets in base-poor forest ecosystems: The contribution of non-crystalline phases evidenced by stable isotopic dilution

    Science.gov (United States)

    van der Heijden, Gregory; Legout, Arnaud; Mareschal, Louis; Ranger, Jacques; Dambrine, Etienne

    2017-07-01

    In terrestrial ecosystems, plant-available pools of magnesium and calcium are assumed to be stored in the soil as exchangeable cations adsorbed on the surface of mineral and/or organic particles. The pools of exchangeable magnesium and calcium are measured by ion-exchange soil extractions. These pools are sustained in the long term by the weathering of primary minerals in the soil and atmospheric inputs. This conceptual model is the base of input-output budgets from which soil acidification and the sustainability of soil chemical fertility is inferred. However, this model has been questioned by data from long-term forest ecosystem monitoring sites, particularly for calcium. Quantifying the contribution of atmospheric inputs, ion exchange and weathering of both primary, secondary and non-crystalline phases to tree nutrition in the short term is challenging. In this study, we developed and applied a novel isotopic dilution technique using the stable isotopes of magnesium and calcium to study the contribution of the different soil phases to soil solution chemistry in a very acidic soil. The labile pools of Mg and Ca in the soil (pools in equilibrium with the soil solution) were isotopically labeled by spraying a solution enriched in 26Mg and 44Ca on the soil. Labeled soil columns were then percolated with a dilute acid solution during a 3-month period and the isotopic dilution of the tracers was monitored in the leaching solution, in the exchangeable (2 sequential 1 mol L-1 ammonium acetate extractions) and non-crystalline (2 sequential soil digestions: oxalic acid followed by nitric acid) phases. Significant amounts of Mg and Ca isotope tracer were recovered in the non-crystalline soil phases. These phases represented from 5% to 25% and from 24% to 50%, respectively, of the Mg and Ca labile pools during the experiment. Our results show that non-crystalline phases act as both a source and a sink of calcium and magnesium in the soil, and contribute directly to soil

  3. Perubahan Struktur Ekonomi, Dekomposisi Sumber Pertumbuhan Output, dan Pertumbuhan Total Factor Productivity (TFP: Analisis Lanjutan Tabel Input-Output Provinsi Kalimantan Selatan, 2000-2010

    Directory of Open Access Journals (Sweden)

    Nurul Fajri

    2016-11-01

    Full Text Available High economic growth is the target of economic development in each area. Economic development should be prioritized in sectors that can be a major driver of the economy so that the economy can grow faster. Economic growth can be seen from the aggregate demand side, namely consumption, investment, government spending, exports and imports, and the aggregate supply side namely labor growth, capital growth and the growth of TFP (Total Factor Productivity. This study uses South Kalimantan’s Input-Output Tables of 2000, 2005 and 2010. The results showed that although the structure of the value-added of the mining sector remains the main economic pillar, but this sector has low linkages with other sectors. The prime mover and driving economic growth sector are manufacturing sector i.e chemical industry, food, beverages and tobacco industry, rubber and plastics industry, paper, printing and publishing industry and industry of metal, machinery, transport equipment and other manufacturing industries. Based Multiplier Product Matrix, manufacturing industry suggest a leading role in the economy so that it can be said that the province of South Kalimantan are heading toward a change in the economic structure. Decomposition of sources of growth based on the Chenery’s model (1960 showed that the main source of economic growth in South Kalimantan is exports by 67 percent in the period 2000-2005 and 73.72 percent in the period 2005-2010, especially the export of coal. Decomposition of productivity growth made by Namura and Kuroda’s model (2004 and suggests that TFP growth and capital have a strong linear relationship and significant Output growth, while labor productivity have no significant correlation with Output growth. Finally, the wealth of the abundant natural resources, industry-oriented economic growth and sustainable development in South Kalimantan Province is agriculture-based industries and mining-based industries with the main strategy is to

  4. Expansion of environmental impact assessment for eco-efficiency evaluation of China's economic sectors: An economic input-output based frontier approach.

    Science.gov (United States)

    Xing, Zhencheng; Wang, Jigan; Zhang, Jie

    2018-04-14

    Due to the increasing environmental burdens caused by dramatic economic expansion, eco-efficiency indicating how efficient the economic activity is with respect to its environmental impacts has become a topic of considerable interest in China. In this context, Economic Input-output Life Cycle Assessment (EIO-LCA) and Data Envelopment Analysis (DEA) are combined to assess the environmental impacts and eco-efficiency of China's 26 economic sectors. The EIO-LCA results indicate that Electricity Production and Supply sector is the largest net exporter in energy usage, CO 2 emission and exhaust emission categories, while Construction sector is the largest net importer for five impact categories except for water withdrawal. Moreover, Construction sector is found to be the destination of the largest sector-to-sector environmental impact flows for the five impact categories and make the most contributions to the total environmental impacts. Another key finding is that Agriculture sector is both the largest net exporter and the greatest contributor for water withdrawal category. DEA results indicate that seven sectors are eco-efficient while over 70% of China's economic sectors are inefficient and require significant improvements. The average target improvements range between 23.30% and 35.06% depending on the impact category. Further sensitivity analysis reveals that the average sensitivity ratios vary from 7.7% to 15.7% among the six impact categories, which are found to be negatively correlated with their improvement potentials. Finally, several policy recommendations are made to mitigate environmental impacts of China's economic sectors and improve their eco-efficiency levels. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Transfers of embodied PM2.5emissions from and to the North China region based on a multiregional input-output model.

    Science.gov (United States)

    Yang, Xue; Zhang, Wenzhong; Fan, Jie; Yu, Jianhui; Zhao, Hongyan

    2018-04-01

    Atmospheric PM 2.5 pollution has become a global issue, and is increasingly being associated with social unrest. As a resource reliant local economy and heavy industry cluster, the North China region has become China's greatest emitter, and the source of much pollution spillover to outside regions. To address this issue, the current study investigates the transfers of embodied PM 2.5 emissions to and from the North China region (which is taken to include Hebei, Henan, Shandong, and Shanxi, and is referred to here as HHSS). The study uses a top-down pollutant emission inventory and environmentally extended multi-regional input-output (EE-MRIO) model. The results indicate that the HHSS area exported a total of 660 Gg of embodied PM 2.5 to other domestic provinces, mainly producing outflows to China's central coastal area (Jiangsu, Zhejiang, and Shanghai) and the Beijing-Tianjin region. HHSS also imported 224 Gg of embodied PM 2.5 from other domestic regions, primarily from Inner Mongolia and the northeast. Furthermore, the transfer of embodied emissions often occurred between geographically adjacent areas to save costs; Beijing and Tianjin mainly transferred embodied pollution to Hebei and Shanxi, whilst Jiangsu, Shanghai, and Zhejiang tended to import embodied air pollutants from Shandong and Henan. At the sectoral level, the melting and pressing of metals, the production of non-metallic products, and electric and heat power production were the three dominant economic sectors for PM 2.5 emissions, together accounting for 81% of total discharges. Capital formation played a key role in outflows (75%) in all sectors. Moreover, the virtual pollutant emissions exported to foreign countries also significantly affected HHSS' discharges significantly, making up 340 Gg. Allocating responsibility for some proportion of HHSS' emissions to the Beijing-Tianjin area and the central coastal provinces may be an effective approach for mitigating releases in HHSS. Copyright

  6. Estimates of embodied global energy and air-emission intensities of Japanese products for building a Japanese input-output life cycle assessment database with a global system boundary.

    Science.gov (United States)

    Nansai, Keisuke; Kondo, Yasushi; Kagawa, Shigemi; Suh, Sangwon; Nakajima, Kenichi; Inaba, Rokuta; Tohno, Susumu

    2012-08-21

    To build a life cycle assessment (LCA) database of Japanese products embracing their global supply chains in a manner requiring lower time and labor burdens, this study estimates the intensity of embodied global environmental burden for commodities produced in Japan. The intensity of embodied global environmental burden is a measure of the environmental burden generated globally by unit production of the commodity and can be used as life cycle inventory data in LCA. The calculation employs an input-output LCA method with a global link input-output model that defines a global system boundary grounded in a simplified multiregional input-output framework. As results, the intensities of embodied global environmental burden for 406 Japanese commodities are determined in terms of energy consumption, greenhouse-gas emissions (carbon dioxide, methane, nitrous oxide, perfluorocarbons, hydrofluorocarbons, sulfur hexafluoride, and their summation), and air-pollutant emissions (nitrogen oxide and sulfur oxide). The uncertainties in the intensities of embodied global environmental burden attributable to the simplified structure of the global link input-output model are quantified using Monte Carlo simulation. In addition, by analyzing the structure of the embodied global greenhouse-gas intensities we characterize Japanese commodities in the context of LCA embracing global supply chains.

  7. Total environmental impacts of biofuels from corn stover using a hybrid life cycle assessment model combining process life cycle assessment and economic input-output life cycle assessment.

    Science.gov (United States)

    Liu, Changqi; Huang, Yaji; Wang, Xinye; Tai, Yang; Liu, Lingqin; Liu, Hao

    2018-01-01

    Studies on the environmental analysis of biofuels by fast pyrolysis and hydroprocessing (BFPH) have so far focused only on the environmental impacts from direct emissions and have included few indirect emissions. The influence of ignoring some indirect emissions on the environmental performance of BFPH has not been well investigated and hence is not really understood. In addition, in order to avoid shifting environmental problems from one medium to another, a comprehensive assessment of environmental impacts caused by the processes must quantify the environmental emissions to all media (air, water, and land) in relation to each life cycle stage. A well-to-wheels assessment of the total environmental impacts resulting from direct emissions and indirect emissions of a BFPH system with corn stover is conducted using a hybrid life cycle assessment (LCA) model combining the economic input-output LCA and the process LCA. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) has been used to estimate the environmental impacts in terms of acidification, eutrophication, global climate change, ozone depletion, human health criteria, photochemical smog formation, ecotoxicity, human health cancer, and human health noncancer caused by 1 MJ biofuel production. Taking account of all the indirect greenhouse gas (GHG) emissions, the net GHG emissions (81.8 g CO 2 eq/MJ) of the biofuels are still less than those of petroleum-based fuels (94 g CO 2 eq/MJ). Maize production and pyrolysis and hydroprocessing make major contributions to all impact categories except the human health criteria. All impact categories resulting from indirect emissions except eutrophication and smog air make more than 24% contribution to the total environmental impacts. Therefore, the indirect emissions are important and cannot be ignored. Sensitivity analysis has shown that corn stover yield and bio-oil yield affect the total environmental impacts of the biofuels

  8. Employment impacts of energy conservation schemes in the residential sector. Calculation of direct and indirect employment effects using a dedicated input/output simulation approach

    International Nuclear Information System (INIS)

    Jeeninga, H.; Weber, C.; Maeenpaeae, I.; Rivero Garcia, F.; Wiltshire, V.; Wade, J.

    1999-10-01

    The relationship between investments in energy efficiency and employment is investigated. The employment effects of several energy conservation schemes implemented in the residential sector are determined by means of a dedicated input/output simulation approach. The employment effects of energy conservation schemes were determined for France, Germany, the Netherlands, Spain and the United Kingdom. Within the time frame of the project, it was not feasible to perform a comparable analysis for Greece, Ireland and Austria. For Finland, the employment effects of energy auditing schemes were investigated by means of a macro economic simulation model. The main driving force behind the positive employment effect of investment in energy efficiency in the residential sector is the fact that the energy sector has a rather low labour intensity. The resulting shift of expenditures from the energy sector to other sectors with higher labour intensity leads to increased employment. The main mechanisms that determine the net shift in employment resulting from investments in energy conservation are: 1. The employment effect related to the initial investment in energy efficiency; 2. The energy saving effect. Due to lower energy bill, a shift in expenditure pattern will occur from the labour extensive energy sector towards sectors with higher labour intensity, thus inducing a net positive effect on employment; 3. The effects of money transfers between sectors. For example, when the investment is subsidised by the government, money is transferred from the governmental sector to the residential sector; 4. Changes in the total government budget as a result of changes in total tax revenue and expenditures on unemployment benefits. Different financing methods for the investment in energy efficiency are analysed. The initial investment can be financed from the general household consumption budget, by means of a loan, using a subsidy or using private savings. The following input parameters

  9. Measuring the environmental sustainability performance of global supply chains: A multi-regional input-output analysis for carbon, sulphur oxide and water footprints.

    Science.gov (United States)

    Acquaye, Adolf; Feng, Kuishuang; Oppon, Eunice; Salhi, Said; Ibn-Mohammed, Taofeeq; Genovese, Andrea; Hubacek, Klaus

    2017-02-01

    Measuring the performance of environmentally sustainable supply chains instead of chain constitute has become a challenge despite the convergence of the underlining principles of sustainable supply chain management. This challenge is exacerbated by the fact that supply chains are inherently dynamic and complex and also because multiple measures can be used to characterize performances. By identifying some of the critical issues in the literature regarding performance measurements, this paper contributes to the existing body of literature by adopting an environmental performance measurement approach for economic sectors. It uses economic sectors and evaluates them on a sectoral level in specific countries as well as part of the Global Value Chain based on the established multi-regional input-output (MRIO) modeling framework. The MRIO model has been used to calculate direct and indirect (that is supply chain or upstream) environmental effects such as CO 2 , SO 2 , biodiversity, water consumption and pollution to name just a few of the applications. In this paper we use MRIO analysis to calculate emissions and resource consumption intensities and footprints, direct and indirect impacts, and net emission flows between countries. These are exemplified by using carbon emissions, sulphur oxide emissions and water use in two highly polluting industries; Electricity production and Chemical industry in 33 countries, including the EU-27, Brazil, India and China, the USA, Canada and Japan from 1995 to 2009. Some of the highlights include: On average, direct carbon emissions in the electricity sector across all 27 member states of the EU was estimated to be 1368 million tons and indirect carbon emissions to be 470.7 million tons per year representing 25.6% of the EU-27 total carbon emissions related to this sector. It was also observed that from 2004, sulphur oxide emissions intensities in electricity production in India and China have remained relatively constant at about 62

  10. Development of Practical inventory analysis using an input-output table. Allocation problem by multi-prices of a commodity and procedure for combining process with input-output analyses; Sangyo renkanhyo wo mochiita jitsuyotekina inbentori bunseki shuho no kakuritsu. Ichizai taka ni yoru haibun mondai oyobi tsumiageho tono yugo hoho

    Energy Technology Data Exchange (ETDEWEB)

    Hondo, H.; Uchiyama, Y. [Central Research Inst. of Electric Power Industry, Tokyo (Japan). Socio-economic Research Center

    1999-11-20

    This paper discusses two main problems to develop practical inventory analysis using an input-output (I-O) table. The first is the allocation problem caused by use of an actual I-O table, which indicates transaction among sectors on monetary unit. When direct and indirect emissions at the production of commodities are calculated using conventional I-O analysis method, the values are underestimated or overestimated due to the assumption that a commodity is sold at a uniform price to all consumers. In this paper, modified method is presented, reflecting the fact that a commodity is sold at different prices to each consumer. It is found that CO{sub 2} emission factors of commodities estimated using the modified method are different fro those using the conventional method. The second is the way to combine process analysis with I-O analysis for reasonable and practical inventory analysis. The merit of process analysis is precise estimation reflecting actual processes. On the other hand, I-O analysis theoretically enables consistent estimation taking account of all processes in society. This paper describes an inventory analysis method that makes the best use of merits of both. CO{sub 2} emission factor of a boiler is calculated using the method and the result proves the method to be available. (author)

  11. Revisited study of fluorine implantation impact on negative bias temperature instability for input/output device of automotive micro controller unit

    Science.gov (United States)

    Yoshida, Tetsuya; Maekawa, Keiichi; Tsuda, Shibun; Shimizu, Tatsuo; Ogasawara, Makoto; Aono, Hideki; Yamaguchi, Yasuo

    2018-04-01

    We investigate the effect of fluorine implanted in the polycrystalline silicon (poly-Si) gate and source/drain (S/D) region on negative bias temperature instability (NBTI) improvement. It is found that there is a trade-off implantation energy dependence of NBTI between fluorine in the poly-Si gate and that in the S/D region. Fluorine implanted in the poly-Si gate contributes to NBTI improvement under low energy implantation. On the other hand, NBTI is improved by fluorine implanted in the S/D region under high energy. We propose that the two-step implantation process with high and low energy is the optimum condition for NBTI improvement.

  12. Economic analysis of energy supply and national economy on the basis of general equilibrium models. Applications of the input-output decomposition analysis and the Computable General Equilibrium models shown by the example of Korea

    International Nuclear Information System (INIS)

    Ko, Jong-Hwan.

    1993-01-01

    Firstly, this study investigaties the causes of sectoral growth and structural changes in the Korean economy. Secondly, it develops the borders of a consistent economic model in order to investigate simultaneously the different impacts of changes in energy and in the domestic economy. This is done any both the Input-Output-Decomposition analysis and a Computable General Equilibrium model (CGE Model). The CGE Model eliminates the disadvantages of the IO Model and allows the investigation of the interdegenerative of the various energy sectors with the economy. The Social Accounting Matrix serves as the data basis of the GCE Model. Simulated experiments have been comet out with the help of the GCE Model, indicating the likely impact of an oil price shock in the economy-sectorally and generally. (orig.) [de

  13. Application of computer voice input/output

    International Nuclear Information System (INIS)

    Ford, W.; Shirk, D.G.

    1981-01-01

    The advent of microprocessors and other large-scale integration (LSI) circuits is making voice input and output for computers and instruments practical; specialized LSI chips for speech processing are appearing on the market. Voice can be used to input data or to issue instrument commands; this allows the operator to engage in other tasks, move about, and to use standard data entry systems. Voice synthesizers can generate audible, easily understood instructions. Using voice characteristics, a control system can verify speaker identity for security purposes. Two simple voice-controlled systems have been designed at Los Alamos for nuclear safeguards applicaations. Each can easily be expanded as time allows. The first system is for instrument control that accepts voice commands and issues audible operator prompts. The second system is for access control. The speaker's voice is used to verify his identity and to actuate external devices

  14. DNA Memory and Input/Output

    Science.gov (United States)

    2006-09-01

    pneumoniae.xml Pseudomonas-aeruginosa.xml Saccharomyces-cerevisiae.xml Treponema-pallidum.xml Vibrio -cholerae.xml Plus, a program called...E. coli one, altering the relative E. coli rates of coupled transcription and translation, although this works well for phage T7 infections and

  15. A new therapeutic proposal for inoperable osteosarcoma: Photodynamic therapy.

    Science.gov (United States)

    de Miguel, Guilherme Chohfi; Abrantes, Ana Margarida; Laranjo, Mafalda; Kitagawa Grizotto, Ana Yoshie; Camporeze, Bruno; Pereira, José Aires; Brites, Gonçalo; Serra, Arménio; Pineiro, Marta; Rocha-Gonsalves, António; Botelho, Maria Filomena; Priolli, Denise Gonçalves

    2017-11-21

    Osteosarcoma, a malignant tumor characterized by bone or osteoid formation, is the second most common primary bone neoplasm. Clinical symptoms include local and surrounding pain, unrelieved by rest or anesthesia. Osteosarcoma has a poor chemotherapeutic response with prognosis dependent on complete tumor excision. Therefore, for inoperable osteosarcoma new therapeutic strategies are needed. The present study aimed to develop murine models of cranial and vertebral osteosarcoma that facilitate simple clinical monitoring and real-time imaging to evaluate the outcome of photodynamic therapy based on a previously developed photosensitizer. Balb/c nude mice were divided into two groups: the cranial and vertebral osteosarcoma groups. Each group was further subdivided into the photodynamic therapy-treated and untreated groups. Images were obtained by scintigraphy with 99m Tc-MIBI and radiography. Tumor growth, necrotic area, osteoid matrix area, and inflammatory infiltration were analyzed. Cranial and vertebral tumors could be macroscopically observed and measured. Radiographic and scintigraphic images showed tumor cells present at the inoculation sites. After photodynamic therapy, scintigraphy showed lower tumoral radiopharmaceutical uptake, which correlated histologically with increased necrosis. Osteoid matrix volume increased, and tumor size decreased in all photodynamic therapy-treated animals. Cranial and vertebral osteosarcoma models in athymic mice are feasible and facilitate in vivo monitoring for the development of new therapies. Photodynamic therapy is a potential antitumoral treatment for surgically inoperable osteosarcoma. Copyright © 2017. Published by Elsevier B.V.

  16. Rescuing Food from the Organics Waste Stream to Feed the Food Insecure: An Economic and Environmental Assessment of Australian Food Rescue Operations Using Environmentally Extended Waste Input-Output Analysis

    Directory of Open Access Journals (Sweden)

    Christian John Reynolds

    2015-04-01

    Full Text Available In this paper we investigate the economic and environmental efficiency of charities and NGO’s “rescuing” food waste, using a 2008 case study of food rescue organisations in Australia. We quantify the tonnages, costs, and environmental impact of food rescued, and then compare food rescue to other food waste disposal methods composting and landfill. To our knowledge this is the first manuscript to comprehend the psychical flows of charity within an Input-Output framework—treating the charity donations as a waste product. We found that 18,105 tonnes of food waste was rescued, and calculate that food rescue operations generate approximately six kilograms of food waste per tonne of food rescued, at a cost of US$222 per tonne of food rescued. This a lower cost than purchasing a tonne of comparable edible food at market value. We also found that per US dollar spent on food rescue, edible food to the value of US$5.71 (1863 calories was rescued. Likewise, every US dollar spent on food rescue redirected food that represented 6.6 m3 of embodied water, 40.13 MJ of embodied energy, and 7.5 kilograms of embodied greenhouse gasses (CO2 equivalents from being sent to landfill or composting, and into mouths of the food insecure. We find that food rescue—though more economically costly than landfill or composting—is a lower cost method of obtaining food for the food insecure than direct purchasing.

  17. Energy use for building construction. Preliminary progress report for period March 1, 1976--May 15, 1976. [Energy intensities of various sectors and overall industry from Energy Input/Output Model

    Energy Technology Data Exchange (ETDEWEB)

    Hannon, B M; Stein, R G; Segal, B; Serber, D

    1976-05-01

    The building construction industry, as broken down by the Bureau of Economic Analysis, U.S. Department of Commerce, was integrated into the Energy Input/Output Model developed at the Center for Advanced Computation, University of Illinois. The resulting expanded model was used to determine energy intensities of various (49) building construction (new and maintenance) sectors and of the overall building construction industry, for year 1967. The latter figure was computed at about 70,000 Btu/$, i.e., the construction industry on the average required about 70,000 Btu of direct and indirect energy per dollar of output produced. The most energy intensive sector was New Construction of Petroleum Pipelines (about 150,000 Btu/$), while the least intensive was Maintenance Construction for Electric Utilities (about 25,000 Btu/$). Also developed were total energy (direct and indirect) requirements to final demand for the building construction industry, for 1967. The overall industry required about 6000 trillion Btu, or about nine percent of the total U.S. energy requirement. New Highway Construction required the most energy to final demand (about 1000 trillion Btu, or 16 percent of the total construction industry requirement), while Maintenance Construction Residential required the least (about 9 trillion Btu, or 0.1 percent of the total industry requirement.

  18. International Trade in Intermediate Inputs: The Case of the Automobile Industry

    OpenAIRE

    Markus Diehl

    2001-01-01

    International trade statistics and input-output tables are analyzed in order to test the hypothesis that international production networks have become more relevant. The share of imported inputs in the gross output value of the motor vehicle industry has grown significantly during the last two decades. Moreover, some low-income countries have become strong exporters of automobile parts, but this trade is mainly regional rather than global. Detailed results are presented in case studies on fou...

  19. The economic effects of a Spanish trade boycott against Catalan products

    OpenAIRE

    Xavier Cuadras Morató; Modest Guinjoan

    2011-01-01

    We study the potential consequences of a hypothetical trade boycott against Catalan products organized by some sectors of the Spanish society mainly for political reasons. A symmetric trade boycott would have two effects: a reduction of Catalan exports to Spain and a partial process of import substitution in Catalonia. In order to quantify the economic impact of the boycott, we compare the "actual" Catalan economy, as described in the input-output table for 2005, with a "simulated" Catalan ec...

  20. Yttrium-90 radioembolization for advanced inoperable hepatocellular carcinoma

    Directory of Open Access Journals (Sweden)

    Lee VHF

    2015-11-01

    Full Text Available Victor Ho-Fun Lee,1,* Dennis KC Leung,1,* Mai-Yee Luk,1 Chi-Chung Tong,1 Martin WM Law,2 Sherry CY Ng,1 Ka-Kin Wong,3 Ronnie TP Poon,4 Dora LW Kwong,1 To-Wai Leung1 1Department of Clinical Oncology, Li Ka Shing Faculty of Medicine, The University of Hong Kong, 2Department of Nuclear Medicine, 3Department of Radiology, Queen Mary Hospital, 4Department of Surgery, Li Ka Shing Faculty of Medicine, The University of Hong Kong, Hong Kong *These authors contributed equally to this work Background: Advanced inoperable hepatocellular carcinoma (HCC conferring a grave prognosis may benefit from yttrium-90 (90Y radioembolization.Methods: Thirty patients with advanced inoperable HCC including those with any lesion >8 cm in maximal diameter or multiple bi-lobar lesions (totally more than five lesions, or portal vein thrombosis treated with radioembolization were reviewed. Treatment efficacy and safety were evaluated. Univariate and multivariate analyses were performed for identifying potential prognostic factors.Results: After a median follow-up of 18.3 months, the response rate was 30.0%, and the disease control rate was 50.0%. Median overall progression-free survival (PFS and overall survival (OS were 3.3 months and 13.2 months, respectively. Longer median PFS was noted in those who had transarterial chemoembolization before radioembolization (7.3 months vs 3.1 months; P=0.021 and duration of alfa-feto protein (AFP response ≥6 months (11.8 months vs 3.0 months; P<0.001. Longer median OS was also revealed in those without portal vein thrombosis (17.1 months vs 4.4 months; P=0.015 and those whose duration of AFP response was ≥6 months (21.2 months vs 8.6 months; P=0.001. Seventeen patients (56.7% developed treatment-related complications including five (16.7% grade 3 events. Multivariate analysis revealed that treatment responders (P=0.001 and duration of AFP response ≥6 months (P=0.006 were prognostic of PFS, whereas the absence of

  1. Inoperable bulky melanoma responds to neoadjuvant therapy with vemurafenib

    Science.gov (United States)

    Fadaki, Niloofar; Cardona-Huerta, Servando; Martineau, Lea; Thummala, Suresh; Cheng, Shih-Tsung; Bunker, Steve R; Garcia-Kennedy, Richard; Wang, Wei; Minor, David; Kashani-Sabet, Mohammed; Leong, Stanley P L

    2012-01-01

    A patient with a bulky inoperable stage IIIC melanoma involving the left axilla and neck from a primary of the left medial elbow received vemurafenib as neo-adjuvant treatment. Based on the molecular analysis, BRAF V600E mutation was present. After 4 months of vemurafinib treatment, the tumours shrank to less than 50% of original clinical size and allowed the surgeons to perform a left modified radical neck dissection and left radical axillary dissection. Pathological analysis of specimen revealed viable metastatic cells only in 1 of 40 nodes resected in the neck and axillary dissection, accounting for over 98% pathological response. Other lymph nodes had a mixture of foamy histiocytic inflammatory reaction fibrosis and islands of necrotic tissues. After recovery from surgery, vemurafenib was resumed and continued for 6 months. He remained disease free 6 months after surgery. PMID:23093505

  2. Safety and feasibility of a combined exercise intervention for inoperable lung cancer patients undergoing chemotherapy

    DEFF Research Database (Denmark)

    Quist, Morten; Rørth, Mikael; Langer, Seppo

    2012-01-01

    To investigate the safety and feasibility of a six-week supervised structured exercise and relaxation training programme on estimated peak oxygen consumption, muscle strength and health related quality of life (HRHRQOL) in patients with inoperable lung cancer, undergoing chemotherapy....

  3. Environmental accounts and trade - a Swedish pilot study

    International Nuclear Information System (INIS)

    Wadeskog, A.

    2001-01-01

    Environmental accounts are supposed to register environmental impacts of economic activities performed by residents on a national basis. However, the international division of labour is not explicitly addressed. A small, open, economy like Sweden use resources, and thereby cause emissions, in other countries due to what is imported for intermediate or final use. On the other hand, the things we export to other countries cause emissions in Sweden. This means that there is an environmental balance of trade that is not explicitly addressed in the accounts. There are however possibilities to estimate these effects. Through input-output analysis it is possible to analyse the value added chain of the different goods and service that make up the final demand, i.e. a form of cradle-to-grave analysis. Environmental trade can be estimated in several ways. One method is to assume that emissions follow the pattern of the trade balance and equal out over time, i.e. ignore the problem. Another method is to calculate the effect of differences in volume and composition in exports and imports. In most cases this is done using the domestic input-output tables and emission coefficients, i.e. assuming that all trading partners have identical resource use, technology and economic structure. A pilot study of the environmental trade balance for Sweden, using different aggregated emissions data for our trading partners and the Swedish input-output table, show that the results calculated with these methods will underestimate external emissions considerably for carbon dioxides and sulphur dioxides. However, for nitrogen oxides emission these methods seem to suffice

  4. Acute toxicity of definitive chemoradiation in patients with inoperable or irresectable esophageal carcinoma

    International Nuclear Information System (INIS)

    Haj Mohammad, Nadia; Hulshof, Maarten CCM; Bergman, Jacques JGHM; Geijsen, Debby; Wilmink, Johanna W; Berge Henegouwen, Mark I van; Laarhoven, Hanneke WM van

    2014-01-01

    Definitive chemoradiation (dCRT) is considered curative intent treatment for patients with inoperable or irresectable esophageal cancer. Acute toxicity data focussing on dCRT are lacking. A retrospective analysis of patients treated with dCRT consisting of 6 cycles of paclitaxel 50 mg/m2 and carboplatin AUC2 concomitant with radiotherapy (50.4 Gy/1.8Gy) from 2006 through 2011 at a single tertiary center was performed. Toxicity, hospital admissions and survival were analysed. 127 patients were treated with definitive chemoradiation. 33 patients were medically inoperable, 94 patients were irresectable, Despite of a significantly smaller tumor length in inoperable patients grade ≥3 toxicity was significantly recorded more often in the inoperable patients (44%) than in irresectable patients (20%) (p < 0.05) Hospital admission occurred more often in the inoperable patients (39%) than in the irresectable patients (22%) (p < 0.05) Median number of cycles of chemotherapy was five for inoperable patients (p = 0.01), while six cycles could be administered to patients with irresectable disease. Recurrence and survival were not significantly different. The odds ratio for developing toxicity ≥ grade 3 was 2.6 (95% CI 1.0-6.4 p < 0.05) for being an inoperable patient and 1.2 (95% CI 1.0-1.4 p = 0.02) per 10 extra micromol/l creatinine. Our data show that acute toxicity of definitive chemoradiation is worse in patients with medically inoperable esophageal carcinoma compared to patients with irresectable esophageal cancer and mainly occurs in the 5th cycle of treatment. Improvement of supportive care should be undertaken in this more fragile group

  5. Spatial-Temporal Variations of Embodied Carbon Emission in Global Trade Flows: 41 Economies and 35 Sectors

    OpenAIRE

    Jing Tian; Hua Liao; Ce Wang

    2014-01-01

    The spatial-temporal variations of embodied carbon emissions in international trade at global scope are still unclear. This paper studies the variations of outflows and inflows of embodied carbon emissions at 35-disaggregated sectors level of 41 countries and regions, and an integrated world input-output model is employed. It also examines what would happen if there were not international trade flows in China, USA and Finland, the representatives of three different levels of the global balanc...

  6. Inequalities in Global Trade: A Cross-Country Comparison of Trade Network Position, Economic Wealth, Pollution and Mortality.

    Science.gov (United States)

    Prell, Christina; Sun, Laixiang; Feng, Kuishuang; Myroniuk, Tyler W

    2015-01-01

    In this paper we investigate how structural patterns of international trade give rise to emissions inequalities across countries, and how such inequality in turn impact countries' mortality rates. We employ Multi-regional Input-Output analysis to distinguish between sulfur-dioxide (SO2) emissions produced within a country's boarders (production-based emissions) and emissions triggered by consumption in other countries (consumption-based emissions). We use social network analysis to capture countries' level of integration within the global trade network. We then apply the Prais-Winsten panel estimation technique to a panel data set across 172 countries over 20 years (1990-2010) to estimate the relationships between countries' level of integration and SO2 emissions, and the impact of trade integration and SO2 emission on mortality rates. Our findings suggest a positive, (log-) linear relationship between a country's level of integration and both kinds of emissions. In addition, although more integrated countries are mainly responsible for both forms of emissions, our findings indicate that they also tend to experience lower mortality rates. Our approach offers a unique combination of social network analysis with multiregional input-output analysis, which better operationalizes intuitive concepts about global trade and trade structure.

  7. Is Chemoembolisation of Value in Inoperable Primary Hepatocellular Carcinoma

    Directory of Open Access Journals (Sweden)

    Jean-Luc Raoul

    1998-01-01

    previously inoperable disease. Large tumours, however, show a poor response and significant incidence of side effects, suggesting that this treatment offers little benefit in advanced disease.

  8. International trade and CO{sub 2} emissions; International handel og CO{sub 2}-udledning

    Energy Technology Data Exchange (ETDEWEB)

    Munksgaard, J.; Pade, L.L. [AKF, Copenhagen (Denmark); Lenzen, M. [Univ. of Sydney (Australia)

    2005-04-01

    International trade has an impact on national CO{sub 2} emissions and consequently on the ability to fulfil national CO{sub 2} reduction targets. Through goods and services traded in a globally interdependent world, the consumption in each country is linked to greenhouse gas emissions in other countries. It has been argued that in order to achieve equitable reduction targets, international trade has to be taken into account when assessing nations' responsibility for abating climate change. Especially for open economies such as Denmark, greenhouse gases embodied in international traded commodities can have a considerable influence on the national greenhouse gas responsibility. Founded in the concepts of 'producer CO{sub 2} responsibility', 'consumer CO{sub 2} responsibility' and 'CO{sub 2} trade balance' the aim of the present study has been to develop the single-region input-output model as used in a previous study into a multi-region input-output model in order to get a more realistic description of the production technologies actually used in the countries of imports. The study concludes that trade is the key to define CO{sub 2} responsibility on macroeconomics level and that imports should be founded in a multi-region model approach. The study also points at the need to consider the impact from foreign trade when negotiating national reduction targets and base line scenarios within the context of international climate agreements. (BA)

  9. A first empirical comparison of energy Footprints embodied in trade. MRIO versus PLUM

    International Nuclear Information System (INIS)

    Wiedmann, Thomas

    2009-01-01

    The Ecological Footprint as an indicator that accounts for human demand on global bioproductivity sets out to quantify the impacts associated with consumption in a given country, including the impacts associated with trade. The National Footprint Accounts (NFA) by Global Footprint Network (GFN) calculate trade-embodied Footprints by multiplying yield and embodied energy factors with mass volumes of traded goods in a 'Product Land Use Matrix (PLUM)'. This article compares energy Footprints embodied in trade from and to the United Kingdom in 2002 as calculated by the NFA-PLUM with the results from a recently developed multi-region input-output model (MRIO) for the UK. Although totals for imports and exports are comparable, breaking down the results by economic sectors reveals large differences and hardly any correlation between the two methods. The omission of trade in services (especially transport services) and upstream impacts of energy goods (fossil fuels) and the use of inappropriate embodied energy factors in the NFA-PLUM method are identified as the main reasons for these differences. In the light of the results it seems that a comprehensive Footprint account of trade can better be achieved with an input-output based approach. I conclude that MRIO models - once fully developed - will be particularly suitable in the future to estimate the Ecological Footprints of imports and exports of nations with the possibility to track their origin via inter-industry linkages, international supply chains and multi-national trade flows. (author)

  10. Ovarian irradiation in recurrent endometriosis; Irradiation ovarienne pour endometriose refractaire inoperable

    Energy Technology Data Exchange (ETDEWEB)

    Kochbati, L.; Chaari, N.; Besbes, M.; Maalej, M. [Institut Salah-Azaiz, Service de Radiotherapie Carcinologique Tunis (Tunisia); Neji, K.; Ben Amara, F. [Centre de Maternite et de Neonatologie de Tunis, Service B (Tunisia); Ben Romdhane, N.K. [Hopital La-Rabta, Service d' Hematologie, Tunis (Tunisia)

    2005-09-15

    We describe a case of a young woman with a history of an aplastic anaemia in which pelvic radiotherapy was used successfully in the management of a recurrent and inoperable endometriosis. The use of therapeutic pelvic or ovarian irradiation in endometriosis may be considered, when surgical and medical treatments have been exhausted and have failed. (authors)

  11. Reversal of Jaundice in Two Patients with Inoperable Cholangiocarcinoma Treated with Cisplatin and Gemcitabine Combination

    Directory of Open Access Journals (Sweden)

    Maarten Criel

    2012-01-01

    Full Text Available Two patients are presented with severe jaundice, due to inoperable cholangiocarcinoma. The chemotherapeutic approach in patients with severe jaundice is discussed. Many schedules of chemotherapy were developed in this tumor type with normal serum bilirubin. We report here the first successful use of cisplatin and gemcitabine combination chemotherapy in these patients. Tolerability was good and liver function tests gradually improved.

  12. Hematoimmunological state of patients with inoperable cervical cancer undergoing multimodality treatment

    International Nuclear Information System (INIS)

    Nikiforova, N.A.; Sorochan, P.P.; Revenkova, S.Yi.; Moskalenko, Yi.P.

    2005-01-01

    Hematological parameters and immunity state were studied in 53 patients with inoperable cervical cancer undergoing radiochemotherapy. It is reasonable use prolonged 5-FU infusions during chemoradiation treatment from 6 p.m. to 6 a.m. with the purpose to minimize the complications in the homeostasis system

  13. Effects of concomitant cisplatin and radiotherapy on inoperable non-small-cell lung cancer

    NARCIS (Netherlands)

    Schaake-Koning, C.; van den Bogaert, W.; Dalesio, O.; Festen, J.; Hoogenhout, J.; van Houtte, P.; Kirkpatrick, A.; Koolen, M.; Maat, B.; Nijs, A.

    1992-01-01

    BACKGROUND AND METHODS: Cisplatin (cis-diamminedichloroplatinum) has been reported to enhance the cell-killing effect of radiation, an effect whose intensity varies with the schedule of administration. We randomly assigned 331 patients with nonmetastatic inoperable non-small-cell lung cancer to one

  14. Neoadjuvant Chemotherapy Creates Surgery Opportunities For Inoperable Locally Advanced Breast Cancer

    Science.gov (United States)

    Wang, Minghao; Hou, Lingmi; Chen, Maoshan; Zhou, Yan; Liang, Yueyang; Wang, Shushu; Jiang, Jun; Zhang, Yi

    2017-01-01

    Neoadjuvant chemotherapy (NAC), the systematic chemotherapy given to patients with locally advanced and inoperable breast caner, has been proven to be of great clinical values. Many scientific reports confirmed NAC could effectively eliminate sub-clinical disseminated lesions of tumor, and improve long-term and disease-free survival rate of patients with locally advanced breast cancer (LABC); however, up to now, LABC is still a serious clinical issue given improved screening and early diagnosis. This study, with main focus on inoperable LABC, investigated the values of NAC in converting inoperable LABC into operable status and assessed the prognosis. Sixty-one patients with inoperable LABC were initially treated with neoadjuvant chemotherapy; their local conditions were improved to operable status. Radical surgery was exerted on 49 patients. Original chemotherapy was performed after surgery, followed by local radiotherapy. And endocrine therapy was optional according to the hormone receptor status. The quality of life for most patients with skin diabrosis was obviously improved because their local conditions were under control. For all recruited cases, the survival duration and life quality were significantly improved in patients who finished both NAC and surgery compared to those who did not. Further more, this study demonstrates improved prognostic consequences. PMID:28327615

  15. Turizm Sektörünün Türkiye Ekonomisi Üzerindeki Etkisinin Girdi-Çıktı Tablosu Yardımıyla Değerlendirilmesi(The Evaluatin of Tourism Sector’s Effect on Turkish Economy Trough Input-Output Table

    Directory of Open Access Journals (Sweden)

    İlkay DİLBER

    2007-01-01

    Full Text Available Tourism industry is one of the most important industries in the economic development of Turkish economy. In addition to its usual effects on GDP, tourism revenues can help to reduce the current account deficits. Thus, in order to determine the importance of tourism industry for the Turkish economy, this study uses input-output tables of the Turkish tourism industry in 1998. Calculating the industry’s value added and factor intensity and understanding whether the sector is subject to the dynamic external economies are extremely important for future policy suggestions.

  16. Inoperable metastatic giant basal cell trunk carcinoma: radiotherapy can be useful; Carcinome basocellulaire geant du tronc metastatique inoperable: la radiotherapie peut etre utile

    Energy Technology Data Exchange (ETDEWEB)

    Mania, A.; Durando, X.; Lapeyre, M. [Centre Jean-Perrin, Clermont-Ferrand (France); Barthelemy, I. [CHU Estaing, Clermont-Ferrand (France)

    2011-10-15

    The authors evoke some characteristics of the basal cell carcinoma (slow evolution, local morbidity) and report and discuss the case of a giant basal cell trunk carcinoma, associated with several symptoms (pain, bleeding, anaemia), already metastatic at the moment of diagnosis, and locally treated by irradiation. Due to its size and expansion, this carcinoma was considered as inoperable. An external radiotherapy has been performed and resulted in a significant clinical tumour reduction. But the metastatic risk is high in such cases. Radiotherapy is then a therapeutic option for a local treatment with a durable efficiency. Short communication

  17. A phase II study of the vitamin D analogue Seocalcitol in patients with inoperable hepatocellular carcinoma

    DEFF Research Database (Denmark)

    Dalhoff, K; Dancey, J; Astrup, L

    2003-01-01

    Hepatocellular carcinoma (HCC) is a common malignant tumour, which has a poor prognosis. Surgical resection can be curative but most patients are inoperable and most chemotherapy agents have minimal activity in this disease. Seocalcitol, a vitamin D analogue, induces differentiation and inhibits...... growth in cancer cell lines and in vivo. The vitamin D receptor is expressed in hepatocytes and more abundantly in HCC cells. In total, 56 patients with inoperable advanced HCC were included in an uncontrolled study of oral Seocalcitol treatment for up to 1 year (with possible extension for responders......). The dose was titrated according to serum calcium levels. The treatment effect was evaluated by regular CT scans. Out of 33 patients evaluable for tumour response, two had complete response (CR), 12 stable disease and 19 progressive disease. The CRs appeared after 6 and 24 months of treatment, and lasted...

  18. ACINO: Report on the design of programmability elements for in-operation network control

    OpenAIRE

    Sköldström Pontus; Junique Stéphane; Marsico Antonio

    2017-01-01

    This ACINO deliverable presents the work performed in task “Design of the programmability elements for in-operation network control” to design the northbound interface of the ACINO orchestrator. The document begins with a review of the requirements of the northbound interface, derived from previous work done related to use cases and application requirements and the expected properties of the ACINO framework (see report "ACINO: The framework for the application-centric network orchestra...

  19. Results of treatment of inoperable recurrences of laryngeal cancer after total laryngectomy

    International Nuclear Information System (INIS)

    Sas-Korczynska, B.; Korzeniowski, S.; Skolyszewski, J.

    1996-01-01

    Backgrund/Purpose: The results of conventional radiotherapy in patients with inoperable recurrence of laryngeal cancer after total laryngectomy are bad. Therefore experimental methods including neutron therapy and combination of chemo- and radiotherapy have been used. This presentation evaluates results of different treatment modalities in patients with inoperable recurrences of laryngeal cancer after total laryngectomy. Patients and Methods: Forty-two patients with inoperable recurrences of laryngeal cancer after total laryngectomy were treated. Thirty patients received radiotherapy alone, and 12 patients received multidrug chemotherapy and radiotherapy. Patients were irradiated with cobalt-60 beam, neutron beam and with mixed cobalt-60 and neutron beam. The tumor dose in cobalt-60 therapy was 60 Gy in 20 to 30 fractions. In 8 patients additional dose of 10 to 20 Gy in 5 to 10 fractions was given to the reduced field. The dose used in neutron irradiation varied from 10 to 13 Gy in 5 to 20 fractions. Results: In 20 patients (47.6%) complete regression after therapy was observed, but only 9 (21.4%) patients survived without evidence of disease at 2 years after radiotherapy. In patients treated with radiotherapy alone the 2-year disease-free survival was observed in 16.7% and in patients who received induction chemotherapy with Cisplatin followed by radical irradiation the 2-year disease-free survival was observed in 40%. Conclusion: The results of therapy of inoperable recurrence of laryngeal cancer after total laryngectomy remain bad. Radiotherapy combined with multidrug chemotherapy including cisplatin may contribute to some improvement of the patients survival. (orig.) [de

  20. Role of concurrent chemoradiation in inoperable carcinoma esophagus: A prospective study

    Directory of Open Access Journals (Sweden)

    Virendra Bhandari

    2014-01-01

    Full Text Available Introduction: The treatment of choice in cancer esophagus is controversial. Radiation therapy oncology group, Eastern cooperative oncology group and Cochrane studies have shown superiority of concurrent chemoradiation in inoperable carcinoma esophagus. In these studies full dose cisplatin was given every 3 weeks along with radiotherapy and hence had some toxicity. So, we started treating inoperable carcinoma esophagus patients with low dose weekly cisplatin given concurrently with radiotherapy aiming at low toxicity and similar results. Materials and Methods: A total of 31 cases of inoperable cases of carcinoma esophagus were treated with once weekly cisplatin 30 mg/m 2 along with radiotherapy 60 Gy in 30 fractions in 6 weeks on Telecobalt/Linear accelerator. Results : w0 e could achieve lower toxicity with 80%, 35% and 19% with 1, 2, and 3 year′s survival with a median survival of 18 months. So, we conclude that this regimen is better than 3 weekly chemotherapy regimen as is better tolerated with less toxicity and similar outcome.

  1. Radiotherapy in elderly patients with inoperable esophageal cancer. Is there a benefit?

    International Nuclear Information System (INIS)

    Semrau, R.; Herzog, S.L.; Kocher, M.; Mueller, R.P.; Vallboehmer, D.; Hoelscher, A.

    2012-01-01

    Radiation oncologists increasingly face elderly cancer patients impaired by comorbidities and reduced performance status. As less data are available for this particular group of patients, the aim of the study was to assess the prognosis of inoperable esophageal cancer patients ≥ 70 years undergoing definitive radiotherapy or radiochemotherapy. Patients aged ≥ 70 with inoperable carcinoma of the esophagus undergoing definitive radio(chemo)therapy between 1995 and 2006 at the University of Cologne were included retrospectively. Maximal total dose of radiotherapy administered was 63 Gy (5 x 1.8 Gy/week). Chemotherapy consisted of cisplatin (20 mg/m 2 on days 1-5 and days 29-33) and 5-fluorouracil (650-1,000 mg/m 2 on days 1-5 and days 29-33). Efficacy was compared with a cohort of 152 patients 70 years group. Prognosis in elderly patients with inoperable esophageal cancer undergoing definitive radiotherapy/radiochemotherapy is limited, although it is not inferior to patients < 70 years.

  2. Permit trading and credit trading

    DEFF Research Database (Denmark)

    Boom, Jan-Tjeerd; R. Dijstra, Bouwe

    This paper compares emissions trading based on a cap on total emissions (permit trading) and on relative standards per unit of output (credit trading). Two types of market structure are considered: perfect competition and Cournot oligopoly. We find that output, abatement costs and the number....... Environmental policy can lead to exit, but also to entry of firms. Entry and exit have a profound impact on the performance of the schemes, especially under imperfect competition. We find that it may be impossible to implement certain levels of total industry emissions. Under credit trading several levels...... of firms are higher under credit trading. Allowing trade between permit-trading and credit-trading sectors may increase in welfare. With perfect competition, permit trading always leads to higher welfare than credit trading. With imperfect competition, credit trading may outperform permit trading...

  3. Permit trading and credit trading

    DEFF Research Database (Denmark)

    Boom, Jan-Tjeerd; R. Dijstra, Bouwe

    This paper compares emissions trading based on a cap on total emissions (permit trading) and on relative standards per unit of output (credit trading). Two types of market structure are considered: perfect competition and Cournot oligopoly. We find that output, abatement costs and the number...... of firms are higher under credit trading. Allowing trade between permit-trading and credit-trading sectors may increase in welfare. With perfect competition, permit trading always leads to higher welfare than credit trading. With imperfect competition, credit trading may outperform permit trading....... Environmental policy can lead to exit, but also to entry of firms. Entry and exit have a profound impact on the performance of the schemes, especially under imperfect competition. We find that it may be impossible to implement certain levels of total industry emissions. Under credit trading several levels...

  4. Cumulative input/output balance of a mechanical-biological waste treatment plant. Comparison of construction material requirements, operating energy expenditure, and the requirement of auxiliary materials in comparison with waste combustion; Kumulative Bilanzierung der mechanisch-biologischen Restabfallbehandlung - Baumaterialien und betrieblicher Energie- und Hilfsstoffaufwand im Vergleich zur Muellverbrennung

    Energy Technology Data Exchange (ETDEWEB)

    Wallmann, R.; Fricke, K. [Ingenieurgemeinschaft Witzenhausen (Germany); Vogtmann, H. [Hessisches Landesamt fuer Regionalentwicklung und Landwirtschaft, Kassel (Germany)

    1998-12-31

    The study strikes a cumulative input/output balance of an existing waste conditioning plant considering not only operating energy demand but also the required construction materials for erecting the plant. In operation since 1996, the waste conditioning plant is entirely state of the art; hence the data obtained are up to date. The results are compared with relevant results for a waste processing plant and evaluated. (orig.) [Deutsch] Im Rahmen der vorliegenden Untersuchung erfolgt eine kumulative Bilanzierung einer bestehenden MBA-Anlage, wobei neben den betrieblichen Energieaufwendungen auch die Baumaterialien zur Herstellung der Anlage beruecksichtigt werden. Die seit 1996 in Betrieb befindliche Abfallbehandlungsanlage entspricht weitestgehend dem Stand der Technik der MBA, wodurch die Aktualitaet der Daten gegeben ist. Die Ergebnisse der Bilanzierung werden im Vergleich zu einer MVA dargestellt und bewertet. (orig.)

  5. Influence of trade on national CO2 emissions

    International Nuclear Information System (INIS)

    Munksgaard, Jesper; Pade, Lise-Lotte; Minx, Jan; Lenzen, Manfred

    2005-01-01

    International trade has an impact on national CO 2 emissions and consequently on the ability to fulfil national CO 2 reduction targets. Through goods and services traded in a globally interdependent world, the consumption in each country is linked to greenhouse gas emissions in other countries. It has been argued that in order to achieve equitable reduction targets, international trade has to be taken into account when assessing nations' responsibility for abating climate change. Especially for open economies such as Denmark, greenhouse gases embodied in internationally traded commodities can have a considerable influence on the national 'greenhouse gas responsibility'. By using input-output modelling, we analyse the influence from international trade on national CO 2 emissions. The aim is to show that trade is the key to define CO 2 responsibility on a macroeconomic level and that imports should be founded in a multi-region model approach. Finally, the paper concludes on the need to consider the impact from foreign trade when negotiating reduction targets and base line scenarios. (Author)

  6. Controlling Access to Input/Output Peripheral Devices

    Directory of Open Access Journals (Sweden)

    E. Y. Rodionov

    2010-03-01

    Full Text Available In this paper the author proposes a system that manages information security policy on enterprise. Problems related to managing information security policy on enterprise and access to peripheral devices in computer systems functioning under control of Microsoft Windows NT operating systems are considered.

  7. Industrial input-output analysis: implications for industrial ecology.

    OpenAIRE

    Duchin, F

    1992-01-01

    Industrial ecology will need to develop fundamentally new approaches to reducing, reusing, and recycling wastes. Industrial ecology will also require an analytic framework for examining the implications for the economic system as a whole of each potential web of industrial changes. A suitable framework is furnished by structural economics, which situates the economy within the physical world. This approach is based on dynamic analysis rather than static concepts of equilibrium, and optimizati...

  8. Input-output interactions and optimal monetary policy

    DEFF Research Database (Denmark)

    Petrella, Ivan; Santoro, Emiliano

    2011-01-01

    This paper deals with the implications of factor demand linkages for monetary policy design in a two-sector dynamic general equilibrium model. Part of the output of each sector serves as a production input in both sectors, in accordance with a realistic input–output structure. Strategic complemen......This paper deals with the implications of factor demand linkages for monetary policy design in a two-sector dynamic general equilibrium model. Part of the output of each sector serves as a production input in both sectors, in accordance with a realistic input–output structure. Strategic...... in this context is of key importance to explore the welfare properties of the model economy. A flexible inflation targeting regime is close to optimal only if the central bank balances inflation and value added variability. Otherwise, targeting gross output variability entails a substantial increase in the loss...

  9. Smart mobility solution with multiple input Output interface.

    Science.gov (United States)

    Sethi, Aartika; Deb, Sujay; Ranjan, Prabhat; Sardar, Arghya

    2017-07-01

    Smart wheelchairs are commonly used to provide solution for mobility impairment. However their usage is limited primarily due to high cost owing from sensors required for giving input, lack of adaptability for different categories of input and limited functionality. In this paper we propose a smart mobility solution using smartphone with inbuilt sensors (accelerometer, camera and speaker) as an input interface. An Emotiv EPOC+ is also used for motor imagery based input control synced with facial expressions in cases of extreme disability. Apart from traction, additional functions like home security and automation are provided using Internet of Things (IoT) and web interfaces. Although preliminary, our results suggest that this system can be used as an integrated and efficient solution for people suffering from mobility impairment. The results also indicate a decent accuracy is obtained for the overall system.

  10. High Performance Input/Output for Parallel Computer Systems

    Science.gov (United States)

    Ligon, W. B.

    1996-01-01

    The goal of our project is to study the I/O characteristics of parallel applications used in Earth Science data processing systems such as Regional Data Centers (RDCs) or EOSDIS. Our approach is to study the runtime behavior of typical programs and the effect of key parameters of the I/O subsystem both under simulation and with direct experimentation on parallel systems. Our three year activity has focused on two items: developing a test bed that facilitates experimentation with parallel I/O, and studying representative programs from the Earth science data processing application domain. The Parallel Virtual File System (PVFS) has been developed for use on a number of platforms including the Tiger Parallel Architecture Workbench (TPAW) simulator, The Intel Paragon, a cluster of DEC Alpha workstations, and the Beowulf system (at CESDIS). PVFS provides considerable flexibility in configuring I/O in a UNIX- like environment. Access to key performance parameters facilitates experimentation. We have studied several key applications fiom levels 1,2 and 3 of the typical RDC processing scenario including instrument calibration and navigation, image classification, and numerical modeling codes. We have also considered large-scale scientific database codes used to organize image data.

  11. Studies on input, output and clinical results of intensive care

    NARCIS (Netherlands)

    Timmers, T.K.

    2011-01-01

    The studies described in this thesis address the usefulness of different prognostic indicators for in-hospital mortality used in the surgical ICU. Subsequently, we address both short- and long-term outcomes and their prediction, in patients admitted to surgical intensive care units. Concerning

  12. Input-output theory and institutional aspects of environmental policy

    NARCIS (Netherlands)

    Steenge, A.E.

    1999-01-01

    National accounting over the years has developed in close interaction with input–output analysis. However, present developments involving core and satellite accounts seem to suggest that this relation will become less close, with possible negative consequences for analysis and policy. In this paper

  13. Input, Output, and Negotiation of Meaning in Spanish Conversation Classes

    Science.gov (United States)

    Rondon-Pari, Graziela

    2014-01-01

    This research study is based on the analysis of speech in three Spanish conversation classes. Research questions are: What is the ratio of English and Spanish spoken in class? Is classroom speech more predominant in students or the instructor? And, are teachers' beliefs in regards to the use of English and Spanish consistent with their classroom…

  14. Input/Output: hoeveelheid en volume compost in de champignonkweek

    NARCIS (Netherlands)

    Leyh, Romain; Blok, Chris

    2017-01-01

    The conclusion of a previous experiment showed that the compost quantity was the most determining parameter for the production volume of mushrooms, despite the addition of hemi cellulose as carbon source to the compost. The present experiment focuses on the mycelium action with regard to the carbon

  15. Input-output formulation of multidimensional adaptive predictive control

    Czech Academy of Sciences Publication Activity Database

    Belda, Květoslav; Böhm, Josef

    2007-01-01

    Roč. 7, č. 2 (2007), s. 118-123 ISSN 1336-5010 R&D Projects: GA ČR(CZ) GA102/05/0271; GA ČR GP102/06/P275 Institutional research plan: CEZ:AV0Z10750506 Keywords : ARX model s * on-line identification * state-space predictive control Subject RIV: BC - Control Systems Theory http://library.utia.cas.cz/separaty/historie/belda-0089614.pdf

  16. Interface Input/Output Automata: Splitting Assumptions from Guarantees

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

    2006-01-01

    We propose a new look at one of the most fundamental types of behavioral interfaces: discrete time specifications of communication---directly related to the work of de Alfaro and Henzinger [3]. Our framework is concerned with distributed non-blocking asynchronous systems in the style of Lynch...

  17. Preliminary Test for Nonlinear Input Output Relations in SISO Systems

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...... are developed. They are much more robust, especially the sinus method which is reliable also for colored, heavy tailed or skew distributed noise....

  18. Input/output routines for a hybrid computer

    International Nuclear Information System (INIS)

    Izume, Akitada; Yodo, Terutaka; Sakama, Iwao; Sakamoto, Akira; Miyake, Osamu

    1976-05-01

    This report is concerned with data processing programs for a hybrid computer system. Especially pre-data processing of magnetic tapes which are recorded during the dynamic experiment by FACOM 270/25 data logging system in the 50 MW steam generator test facility is described in detail. The magnetic tape is a most effective recording medium for data logging, but recording formats of the magnetic tape are different between data logging systems. In our section, the final data analyses are performed by data in the disk of EAI-690 hybrid computer system, and to transfer all required information in magnetic tapes to the disk, the magnetic tape editing and data transit are necessary by sub-computer NEAC-3200 system. This report is written for users as a manual and reference hand book of pre-data processing between different type computers. (auth.)

  19. State space and input-output linear systems

    CERN Document Server

    Delchamps, David F

    1988-01-01

    It is difficult for me to forget the mild sense of betrayal I felt some ten years ago when I discovered, with considerable dismay, that my two favorite books on linear system theory - Desoer's Notes for a Second Course on Linear Systems and Brockett's Finite Dimensional Linear Systems - were both out of print. Since that time, of course, linear system theory has undergone a transformation of the sort which always attends the maturation of a theory whose range of applicability is expanding in a fashion governed by technological developments and by the rate at which such advances become a part of engineering practice. The growth of the field has inspired the publication of some excellent books; the encyclopedic treatises by Kailath and Chen, in particular, come immediately to mind. Nonetheless, I was inspired to write this book primarily by my practical needs as a teacher and researcher in the field. For the past five years, I have taught a one semester first year gradu­ ate level linear system theory course i...

  20. Trade in the telecoupling framework: evidence from the metals industry

    Directory of Open Access Journals (Sweden)

    Hang Xiong

    2018-03-01

    Full Text Available As a conceptual framework for understanding contemporary sustainability challenges, telecoupling emphasizes the importance of socioeconomic and environmental interactions over long distances. These long-distance interactions can occur through multiple human activities. We focus on international trade, a major channel of telecoupling flows, and in particular on the international trade of metals. We use the data of physical products and embedded greenhouse gas (GHG emissions trade in the World Input-Output Database (WIOD to quantitatively examine how countries contribute to both economic and environmental flows through the trade of metals, but also how that contribution varies depending on their position in the global value chain (GVC of contemporary international trade. This analysis is built on previously developed techniques for decomposing gross exports of products, which we apply to examine embedded GHG emissions. We make comparisons between countries' contributions to flows of economic value versus embedded GHG emissions, but also examine contributions beyond total volumes of trade and bilateral trade. Specifically, we quantify the economic and environmental spillover effects that occur in contemporary international trade because of the GVC in which flows of intermediate goods form components in other subsequently traded goods. We interpret differences between countries' contributions to the flows of economic value versus embedded GHG emissions as being related to the intensity and efficiency of resource use during production. In turn, differences in contributions to direct trade flows versus spillover flows are related to their positions in the GVC. Subsequently, we discuss other elements of the telecoupling framework in trade, i.e., agents, causes, and effects. Quantitatively incorporating these telecoupling framework elements alongside spillover flows will enable investigation of dynamics and relationships that traditional trade theories

  1. Resource Distribution, Interprovincial Trade, and Embodied Energy: A Case Study of China

    Directory of Open Access Journals (Sweden)

    Sanmang Wu

    2015-01-01

    Full Text Available Based on data from 2007 input-output tables for each province, we estimated the energy embodied in China’s interprovincial trade through input-output analysis. The results show that a sizable transfer of energy is embodied in China’s interprovincial trade, and the transfer goes from the central and western provinces, which have higher energy endowments, to the eastern and coastal provinces, which have more developed economies. The provinces with the greatest net inflow of embodied energy via interprovincial trade were Zhejiang, Guangdong, Beijing, Shandong, and Jiangsu. The provinces with the greatest net outflow of embodied energy were Inner Mongolia, Shanxi, Shaanxi, Xinjiang, and Heilongjiang. To effectively reduce China’s energy consumption, it is vital to adhere not only to the producer responsibility principle but also to the consumer responsibility principle. In particular, the economically developed provinces with substantial net inflows of embodied energy in interprovincial trade should provide support to the provinces from which the embodied energy outflows come.

  2. An analysis of the driving forces of CO2 emissions embodied in Japan-China trade

    International Nuclear Information System (INIS)

    Dong Yanli; Ishikawa, Masanobu; Liu Xianbing; Wang Can

    2010-01-01

    By using the latest China-Japan input-output data sets and the index decomposition analysis (IDA) approach, this article analyzes the driving forces of CO 2 emissions embodied in trade between the two countries during 1990-2000. We found that the growth of trade volume had a large influence on the increase of CO 2 emissions embodiments in bilateral trade. The dramatic decline in carbon intensity of the Chinese economy is a primary cause in offsetting CO 2 emissions exported from China to Japan over 1995-2000. We argue that a better understanding of the factors affecting CO 2 emissions embodied in international trade will assist in seeking more effective climate policies with wider participation in the post-Kyoto regime.

  3. Percutaneous cryoablation for the treatment of medically inoperable stage I non-small cell lung cancer.

    Directory of Open Access Journals (Sweden)

    Yoshikane Yamauchi

    Full Text Available BACKGROUND: To evaluate the midterm results of percutaneous cryoablation for medically inoperable stage I non-small cell lung cancer. METHODOLOGY/PRINCIPAL FINDINGS: Between January 2004 and June 2010, 160 patients underwent computer tomography guided percutaneous cryoablation for lung tumors at our institution. Of these patients, histologically proven stage I lung cancer patients with more than one year of follow-up, were retrospectively reviewed. All of these patients were considered to be medically inoperable with Charlson comorbidity index of 3 or greater. Follow-up was based primarily on computed tomography. There were 22 patients with 34 tumors who underwent 25 sessions of cryoablation treatment. Complications were pneumothoraces in 7 treatments (28%, chest tube required in one treatment, and pleural effusions in 8 treatments (31%. The observation period ranged from 12-68 months, average 29±19 months, median 23 months. Local tumor progression was observed in one tumor (3%. Mean local tumor progression-free interval was 69±2 months. One patient died of lung cancer progression at 68 months. Two patients died of acute exacerbations of idiopathic pulmonary fibrosis which were not considered to be directly associated with cryoablation, at 12 and 18 months, respectively. The overall 2- and 3-year survivals were 88% and 88%, respectively. Mean overall survival was 62±4 months. Median overall survival was 68 months. The disease-free 2- and 3-year survivals were 78% and 67%, respectively. Mean disease-free survival was 46±6 months. Pulmonary function tests were done in 16 patients (18 treatments before and after cryoablation. Percentage of predicted vital capacity, and percentage of predicted forced expiratory volume in 1 second, did not differ significantly before and after cryoablation (93±23 versus 90±21, and 70±11 versus 70±12, respectively. CONCLUSIONS/SIGNIFICANCE: Although further accumulation of data is necessary regarding efficacy

  4. High dose rate brachytherapy for medically inoperable stage I endometrial cancer

    International Nuclear Information System (INIS)

    Petereit, Daniel G.; Sarkaria, Jann N.; Schink, Julian; Springman, Scott R.; Kinsella, Timothy J.; Buchler, Dolores A.

    1995-01-01

    Purpose/Objective: To determine the efficacy of high dose rate (HDR) brachytherapy in patients with medically inoperable endometrial cancer clinically confined to the corpus. Materials and Methods: Forty-two patients with endometrial cancer and an intact uterus have been treated since 1989 with HDR brachytherapy. Twenty-six patients with medically inoperable Stage I disease were treated with radiation alone and form the basis of this study. Obesity was assessed using the body mass index (BMI kg/m 2 ) scale. Patients with a BMI above 28 were considered obese and those above 35 morbidly obese, per standard anesthesia guidelines. Brachytherapy was delivered in 5 HDR insertions, 1 week apart, without any external beam radiation. The following doses were delivered per insertion: 5.7 Gy to point S, 7.0 Gy to point W, 8.2 Gy to the vaginal surface and 9.2 Gy to point M. Point M represents the conventional point A dose, while points S and W are myometrial points. A single tandem with either ovoids or cylinders was placed, unless the uterine cavity would accommodate 2 tandems. All treatments were outpatient using intravenous fentanyl and midazolam for sedation. Pelvic ultrasound was commonly used at the time of brachytherapy to verify tandem placement. Three year clinical endpoints were calculated using the Kaplan Meier method. Results: The median follow-up for the study cohort was 21 months with follow-up greater than 36 months in 11 patients. Seventeen of the 26 patients were inoperable due to morbid obesity (median weight and BMI; 316 lbs and 55 kg/m 2 , respectively); the other patients had poor cardiopulmonary reserve ± obesity. The median age, KPS (Karnofsky Performance Status), weight, ASA (American Society of Anesthesiologists' Physical Class System) and BMI were 63 yrs, 80%, 285 lbs, 3 and 49 kg/m 2 , respectively. Two patients with an ASA of 3 and 4 died from acute cardio-pulmonary events within 30 days of the last insertion, emphasizing the need for accurate pre

  5. Neoadjuvant peptide receptor radionuclide therapy for an inoperable neuroendocrine pancreatic tumor

    Science.gov (United States)

    Kaemmerer, Daniel; Prasad, Vikas; Daffner, Wolfgang; Hörsch, Dieter; Klöppel, Günter; Hommann, Merten; Baum, Richard P

    2009-01-01

    Pancreatic endocrine tumors are rare but are among the most common neuroendocrine neoplasms of the abdomen. At diagnosis many of them are already advanced and difficult to treat. We report on an initially inoperable malignant pancreatic endocrine tumor in a 33-year-old woman, who received neoadjuvant peptide receptor radionuclide therapy (PRRT) as first-line treatment. This resulted in a significant downstaging of the tumor and allowed its subsequent complete surgical removal. Follow-up for eighteen months revealed a complete remission. This is the first report on neoadjuvant PRRT in a neuroendocrine neoplasm with subsequent successful complete resection. PMID:19998512

  6. Hypofractionated palliative radiotherapy in locally advanced inoperable head and neck cancer: CMC vellore experience

    Directory of Open Access Journals (Sweden)

    Saikat Das

    2013-01-01

    Full Text Available Background: A novel, short duration, palliative radiotherapy schedule for inoperable head and neck cancer was evaluated in terms of palliation of cancer-related symptoms and acute toxicities. Materials and Methods: Thirty-six patients with inoperable head and neck cancer were included in the study (2010-2012. All patients received 40 Gy in 10 fractions (equivalent dose: 49.8 Gy in conventional fractionation with 2 fractions per week. Treatment-related toxicity was assessed using Radiation Therapy Oncology Group criteria. Functional Assessment of Cancer Therapy (Head and Neck, FACT H and N quality of life (QOL tool was administered before starting and at the completion of radiotherapy. Mean value before and after treatment was compared (paired t-test, P = 0.05, two-tailed for significance. Results: Thirty-three patients (male: 29, female: 4, mean age: 57.8 ± 9.7 years were included in the analysis (three patients discontinued treatment due to socioeconomic reasons. All patients had advanced inoperable head and neck cancers (27% IVA, 61% IVB, 9% IVC, TNM stage and 3% recurrent disease. Distressing pain at primary site (42%, dysphagia (18%, neck swelling (30%, and hoarseness (10% were common presentations. Incidence of grade III mucositis and dermatitis and pain was 18%, 3%, and 24%, respectively. Planned radiotherapy without any interruptions was completed by 73% patients. QOL assessment showed improvement in social well-being (17.4 vs. 20.01, P = 0.03, but no significant change was observed in head and neck specific score (25.1 vs. 25.0, P = NS after treatment. Reduction of pain was observed in 88% patients and 60% patients had improvement of performance status. Median overall survival of the cohort was 7 months. Conclusions: The study shows that this short duration palliative radiotherapy schedule is a clinically viable option for advanced inoperable head and neck cancer to achieve significant palliation of the main presenting symptoms like

  7. Potentials of radiotherapy in inoperable tumours of the central nervous system in childhood

    International Nuclear Information System (INIS)

    Kocsis, Bela; Horvath, Akos; Varjas, Geza; Bajcsay, Andras; Kaldau, Ferenc; Pap, Lilla

    1990-01-01

    16 patients under 16 years were irradiated because of inoperable tumours in the central nervous system. Irradiations were performed by cobalt-60 facility and by a Neptun 10-p linear accelerator, and the results were evaluated. In these cases radiotherapy has an important role as it is the only definitive therapeutical intervention. Radiotherapy should be attempted even if the histological verification is impossible and only the clinical course referres to malignant process. Radiotherapy must be carried out on the basis of CT scan controlled irradiation plan. The 3-year survival rate was 14 per cent in the authors' material. (author) 16 refs.; 5 figs.; 3 tabs

  8. Hierarchicality of trade flow networks reveals complexity of products.

    Directory of Open Access Journals (Sweden)

    Peiteng Shi

    Full Text Available With globalization, countries are more connected than before by trading flows, which amounts to at least 36 trillion dollars today. Interestingly, around 30-60 percents of exports consist of intermediate products in global. Therefore, the trade flow network of particular product with high added values can be regarded as value chains. The problem is weather we can discriminate between these products from their unique flow network structure? This paper applies the flow analysis method developed in ecology to 638 trading flow networks of different products. We claim that the allometric scaling exponent η can be used to characterize the degree of hierarchicality of a flow network, i.e., whether the trading products flow on long hierarchical chains. Then, it is pointed out that the flow networks of products with higher added values and complexity like machinary, transport equipment etc. have larger exponents, meaning that their trade flow networks are more hierarchical. As a result, without the extra data like global input-output table, we can identify the product categories with higher complexity, and the relative importance of a country in the global value chain by the trading network solely.

  9. Hierarchicality of trade flow networks reveals complexity of products.

    Science.gov (United States)

    Shi, Peiteng; Zhang, Jiang; Yang, Bo; Luo, Jingfei

    2014-01-01

    With globalization, countries are more connected than before by trading flows, which amounts to at least 36 trillion dollars today. Interestingly, around 30-60 percents of exports consist of intermediate products in global. Therefore, the trade flow network of particular product with high added values can be regarded as value chains. The problem is weather we can discriminate between these products from their unique flow network structure? This paper applies the flow analysis method developed in ecology to 638 trading flow networks of different products. We claim that the allometric scaling exponent η can be used to characterize the degree of hierarchicality of a flow network, i.e., whether the trading products flow on long hierarchical chains. Then, it is pointed out that the flow networks of products with higher added values and complexity like machinary, transport equipment etc. have larger exponents, meaning that their trade flow networks are more hierarchical. As a result, without the extra data like global input-output table, we can identify the product categories with higher complexity, and the relative importance of a country in the global value chain by the trading network solely.

  10. Hierarchicality of Trade Flow Networks Reveals Complexity of Products

    Science.gov (United States)

    Shi, Peiteng; Zhang, Jiang; Yang, Bo; Luo, Jingfei

    2014-01-01

    With globalization, countries are more connected than before by trading flows, which amounts to at least trillion dollars today. Interestingly, around percents of exports consist of intermediate products in global. Therefore, the trade flow network of particular product with high added values can be regarded as value chains. The problem is weather we can discriminate between these products from their unique flow network structure? This paper applies the flow analysis method developed in ecology to 638 trading flow networks of different products. We claim that the allometric scaling exponent can be used to characterize the degree of hierarchicality of a flow network, i.e., whether the trading products flow on long hierarchical chains. Then, it is pointed out that the flow networks of products with higher added values and complexity like machinary, transport equipment etc. have larger exponents, meaning that their trade flow networks are more hierarchical. As a result, without the extra data like global input-output table, we can identify the product categories with higher complexity, and the relative importance of a country in the global value chain by the trading network solely. PMID:24905753

  11. Energy trading

    International Nuclear Information System (INIS)

    Glachant, J.M.; Kimman, R.; Schweickardt, H.E.

    2001-05-01

    This document brings together 18 testimonies of experts about energy trading: 1 - the energy trading experience on European deregulated markets: structure of deregulated energy markets in Europe, case study: a two years experience of a power exchange in western Europe, case study: European energy exchanges (experience of spot and future trading), case study: risk management on energy deregulated markets; 2 - the trading activity environment and realities in France: the French electrical law and the purchase for resale, experience feedback: status after 3 months of trading in France (the first experience of a French producer), the access to the power transportation network, which legal constraints for trading in France, the access of eligible clients to the French power market, conditions of implementation of a power exchange market in France, which real trading possibilities in France for producers and self-producers in the legal frame, case study: the role of trading in the company (main part or link to process), convergence of gas and electricity markets, gas-electricity trading: which pricing models; 3 - risk management and use of new technologies potentiality, the results outside the French borders: case study: what differences between the European and US markets, prices volatility and commodity risk management: towards the on-line trading, role and developments of E-business in energy trading, how to simplify trade in a liberalized market. (J.S.)

  12. In-operation inspection technology development 'development of a rational maintenance management method for light-water reactor plant'

    International Nuclear Information System (INIS)

    Matsumoto, K.; Sanoh, J.; Uhara, Y.; Takeshima, K.; Tani, M.; O'Shima, E.

    2001-01-01

    In 1985, the Japanese national project named 'In-Operation Inspection Technology Development (IOI)' was initiated, as a part of the activities for advancing the LWR(light water reactor)technology in Japan. This project developed the techniques for in-operation monitoring and detecting of early anomalies of nuclear power equipment such as rotating machines, valves and piping. Further, the estimation systems for diagnosing and predicting a degradation rate of these items of equipment were constructed. Based on these results, a new maintenance management technology was constructed. This paper describes the outline of the new maintenance management concept. (authors)

  13. Safety and Efficacy of Concurrent Cisplatin and Radiotherapy in Inoperable or Metastatic Squamous Cell Esophageal Cancer

    International Nuclear Information System (INIS)

    Kumar, Shaleen; Dimri, Kislay; Datta, Niloy R.; Rastogi, Neeraj; Lal, Punita; Das, Koilpillai J. Maria; Ayyagari, Sundar

    2002-01-01

    Between August 1996 and May 1999, 50 consecutive, previously untreated patients with carcinoma of the esophagus and who were inoperable for various reasons were treated with weekly doses of cisplatin (35 mg/m 2 , maximum 7 cycles) concurrent with either 66 Gy/33 fractions external beam radiotherapy (EBRT) (n=42) or 50 Gy/25 fractions EBRT and two insertions of high-dose-rate intraluminal radiotherapy of 6 Gy each, spaced a week apart (n=8). Eighty-two percent (41/50) of the patients received the stipulated radiotherapy (RT) dose. Seventy-six percent (38/50) received at least 6 cycles of chemotherapy. Neutropenia in the form of WHO grade II-12% (6/50) and grade III-2% (1/50) was observed. Grade III emesis was seen in 8% (4/50). Improvement in the swallowing status was seen in 84% (42/50). Median duration of dysphagia relief was 6 months. The median overall survival was 9 months with 17% estimated to be alive after 4 years. Combined treatment with single agent cisplatin and definitive radiotherapy for inoperable cancer of the esophagus is safe, well tolerated and reasonably efficacious

  14. Safety and Efficacy of Concurrent Cisplatin and Radiotherapy in Inoperable or Metastatic Squamous Cell Esophageal Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Shaleen; Dimri, Kislay; Datta, Niloy R.; Rastogi, Neeraj; Lal, Punita; Das, Koilpillai J. Maria; Ayyagari, Sundar [Sanjay Gandhi Postgraduate Inst. of Medical Sciences, Lucknow (India). Dept of Radiotherapy

    2002-09-01

    Between August 1996 and May 1999, 50 consecutive, previously untreated patients with carcinoma of the esophagus and who were inoperable for various reasons were treated with weekly doses of cisplatin (35 mg/m{sup 2}, maximum 7 cycles) concurrent with either 66 Gy/33 fractions external beam radiotherapy (EBRT) (n=42) or 50 Gy/25 fractions EBRT and two insertions of high-dose-rate intraluminal radiotherapy of 6 Gy each, spaced a week apart (n=8). Eighty-two percent (41/50) of the patients received the stipulated radiotherapy (RT) dose. Seventy-six percent (38/50) received at least 6 cycles of chemotherapy. Neutropenia in the form of WHO grade II-12% (6/50) and grade III-2% (1/50) was observed. Grade III emesis was seen in 8% (4/50). Improvement in the swallowing status was seen in 84% (42/50). Median duration of dysphagia relief was 6 months. The median overall survival was 9 months with 17% estimated to be alive after 4 years. Combined treatment with single agent cisplatin and definitive radiotherapy for inoperable cancer of the esophagus is safe, well tolerated and reasonably efficacious.

  15. High dose rate endobronchial brachytherapy effectively palliates symptoms due to inoperable lung cancer

    International Nuclear Information System (INIS)

    Celebioglu, B.; Gurkan, O.U.; Savas, I.; Kose, K.; Kurtman, C.; Gonullu, U.; Erdogan, S.

    2002-01-01

    Intraluminal brachytherapy has become an established treatment for major airway occlusion by relapsed or persistent inoperable endobronchial tumors. The aim of this study was to compare the palliation improvement pre- and post-radiotherapy. The study group was 95 patients with the diagnosis of inoperable lung cancer who were eligible for high dose rate (HDR) brachytherapy. Fiber-optic bronchoscopy was performed and the level and degree of endobronchial obstruction were estimated in terms of bronchial obstruction index. Endobronchial irradiation was delivered using remote HDR afterloading brachytherapy with iridium-192. Brachytherapy was delivered at weeks 1, 2 and 3 at 7.5 Gy per fraction or at weeks 1 and 2 at 10 Gy per fraction. All patients were evaluated at the beginning and at the third month of therapy. Using Speiser's symptomatic scoring criteria, the severity of symptoms (dyspnea, cough, hemoptysis and postobstructive pneumonia) was weighted. Bronchoscopic findings at the initial evaluation and at the third month were also scored. Surviving patients were followed up for a minimum of 3 months with a mean of 7.5±5.35 months (median: 6 months). All the symptoms and bronchial obstruction improved significantly after brachytherapy (P 0.05). All the symptoms and bronchial obstruction index seemed to improve after brachytherapy. However, it is difficult to predict the response before the therapy. (author)

  16. Quality of life of inoperable non-small cell lung carcinoma

    International Nuclear Information System (INIS)

    Minet, P.; Chevalier, P.; Gras, A.; Dejardin-Closon, M.T.; Bartsch, P.; Raets, D.; Lennes, G.

    1987-01-01

    Eighty one patients with inoperable non-small cell lung carcinoma (NSCLC) were entered in a randomized phase II trial comparing split-dose irradiation alone to combined treatment radiotherapy and polychemotherapy (C.A.P. + V.D.S.). The quality of life and the survival of the patients were studied. The authors have defined three classes of quality of life responses based on the time elapsed before the performance status index drops. A higher quality of life failure rate was observed in the combined treatment group (p non-significant) but the time elapsed before the Karnofsky index drops is longer in the combined treatment group for the quality of life 'no change' subgroup (p = 0.15). Survival and quality adjusted survival are similar in both treatment groups. The same conclusion holds for retrospective stratified treatment groups. The authors conclude that as far as the quality of life is concerned, polychemotherapy combined with the particular split-dose irradiation schedule used is an effective treatment of inoperable NSCLC. (Auth.)

  17. Difitsión del cambio tecnológico y su impacto sobre el nivel de empleo en sectores potencialmente innovadores de la economía andaluza (1975-1980. Evaluación y análisis a partir de las tablas Input-Output

    Directory of Open Access Journals (Sweden)

    Antonio García Sáncbez

    1994-02-01

    Full Text Available El avance tecnológico constituye una de las fuentes primordiales del desarrollo de todo sistema económico. En regiones en las que la innovación tecnológica autóctona es muy limitada, el avance tecnológico y sus efectos dinamizadores sobre el tejido productivo y el empleo derivan básicamente de la adaptación y difusión de progreso s tecnológicos generados en otras áreas. Creemos que este es el caso de Andalucía y por ello planteamos un estudio que nos permita aproximarnos a la medición de dicho fenómeno. De ahí el objetivo del trabajo que hemos planteado: realizar una estimación del grado de difusión del cambio tecnológico en Andalucía, con especial atención a su impacto en el nivel de empleo en sectores potencialmente innovadores, a partir de las Tablas Input-Output regionales disponibles actualmente, editadas para los años 1975 y 1980.

  18. Trading Land: A Review of Approaches to Accounting for Upstream Land Requirements of Traded Products.

    Science.gov (United States)

    Schaffartzik, Anke; Haberl, Helmut; Kastner, Thomas; Wiedenhofer, Dominik; Eisenmenger, Nina; Erb, Karl-Heinz

    2015-10-01

    Land use is recognized as a pervasive driver of environmental impacts, including climate change and biodiversity loss. Global trade leads to "telecoupling" between the land use of production and the consumption of biomass-based goods and services. Telecoupling is captured by accounts of the upstream land requirements associated with traded products, also commonly referred to as land footprints. These accounts face challenges in two main areas: (1) the allocation of land to products traded and consumed and (2) the metrics to account for differences in land quality and land-use intensity. For two main families of accounting approaches (biophysical, factor-based and environmentally extended input-output analysis), this review discusses conceptual differences and compares results for land footprints. Biophysical approaches are able to capture a large number of products and different land uses, but suffer from a truncation problem. Economic approaches solve the truncation problem, but are hampered by the limited disaggregation of sectors and products. In light of the conceptual differences, the overall similarity of results generated by both types of approaches is remarkable. Diametrically opposed results for some of the world's largest producers and consumers of biomass-based products, however, make interpretation difficult. This review aims to provide clarity on some of the underlying conceptual issues of accounting for land footprints.

  19. Substantial nitrogen pollution embedded in international trade

    Science.gov (United States)

    Oita, Azusa; Malik, Arunima; Kanemoto, Keiichiro; Geschke, Arne; Nishijima, Shota; Lenzen, Manfred

    2016-02-01

    Anthropogenic emissions of reactive nitrogen to the atmosphere and water bodies can damage human health and ecosystems. As a measure of a nation’s contribution to this potential damage, a country’s nitrogen footprint has been defined as the quantity of reactive nitrogen emitted during the production, consumption and transportation of commodities consumed within that country, whether those commodities are produced domestically or internationally. Here we use global emissions databases, a global nitrogen cycle model, and a global input-output database of domestic and international trade to calculate the nitrogen footprints for 188 countries as the sum of emissions of ammonia, nitrogen oxides and nitrous oxide to the atmosphere, and of nitrogen potentially exportable to water bodies. Per-capita footprints range from under 7 kg N yr-1 in some developing countries to over 100 kg N yr-1 in some wealthy nations. Consumption in China, India, the United States and Brazil is responsible for 46% of global emissions. Roughly a quarter of the global nitrogen footprint is from commodities that were traded across country borders. The main net exporters have significant agricultural, food and textile exports, and are often developing countries, whereas important net importers are almost exclusively developed economies. We conclude that substantial local nitrogen pollution is driven by demand from consumers in other countries.

  20. Symptom prevalence, intensity, and distress in patients with inoperable lung cancer in relation to time of death

    NARCIS (Netherlands)

    Tishelman, Carol; Petersson, Lena-Marie; Degner, Lesley F.; Sprangers, Mirjam A. G.

    2007-01-01

    Purpose To examine symptom prevalence, intensity, and association with distress in patients with inoperable lung cancer (LC), using time to death as point of reference. Patients and Methods A consecutive sample of 400 patients completed the European Organisation for Research and Treatment of Cancer

  1. Epidemic Trade

    DEFF Research Database (Denmark)

    Boerner, Lars; Severgnini, Battista

    This paper studies the spread of the Black Death as a proxy for the intensity of medieval trade flows between 1346 and 1351. The Black Death struck most areas of Europe and the wider Mediterranean. Based on a modied version of the gravity model, we estimate the speed (in kilometers per day......, and geographical position are of substantial signicance. These results are the first to enable us to identify and quantify key variables of medieval trade flows based on an empirical trade model. These results shed new light on many qualitative debates on the importance and causes of medieval trade....

  2. Trading Agents

    CERN Document Server

    Wellman, Michael

    2011-01-01

    Automated trading in electronic markets is one of the most common and consequential applications of autonomous software agents. Design of effective trading strategies requires thorough understanding of how market mechanisms operate, and appreciation of strategic issues that commonly manifest in trading scenarios. Drawing on research in auction theory and artificial intelligence, this book presents core principles of strategic reasoning that apply to market situations. The author illustrates trading strategy choices through examples of concrete market environments, such as eBay, as well as abst

  3. Trade pattern change impact on industrial CO{sub 2} emissions in Taiwan

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Jung-Hua; Huang, Yun-Hsun [Department of Resources Engineering, National Cheng Kung University, Tainan 701 (China); Chen, Yen-Yin [Institute of Natural Resource Management, National Taipei University, Taipei 104 (China)

    2007-11-15

    Input-output structural decomposition analysis (I-O SDA) is applied in this paper to analyze the sources of change in industrial CO{sub 2} emissions in Taiwan from 1989 to 2001. Owing to the fact that Taiwan is an export-oriented, trade-dependent economy, the focus is on trade transformation over the past decade and its effect over industrial CO{sub 2} emissions. Change in trade patterns has significantly impacted many aspects of the Taiwan economy, subsequently resulting in various influences on industrial CO{sub 2} emissions, as shown by empirical analysis results. Change in export level increased industrial CO{sub 2} emissions, above all other effects, by 72.1%. However, changes in export mix and import coefficients imposed effects of dragging down industrial CO{sub 2} emissions by 5.7% and 11.7%, respectively. (author)

  4. Trade pattern change impact on industrial CO{sub 2} emissions in Taiwan

    Energy Technology Data Exchange (ETDEWEB)

    Wu Junghua [Department of Resources Engineering, National Cheng Kung University, Tainan 701, Taiwan (China)], E-mail: hwaa@mail.ncku.edu.tw; Chen Yenyin [Institute of Natural Resource Management, National Taipei University, Taipei 104, Taiwan (China); Huang Yunhsun [Department of Resources Engineering, National Cheng Kung University, Tainan 701, Taiwan (China)

    2007-11-15

    Input-output structural decomposition analysis (I-O SDA) is applied in this paper to analyze the sources of change in industrial CO{sub 2} emissions in Taiwan from 1989 to 2001. Owing to the fact that Taiwan is an export-oriented, trade-dependent economy, the focus is on trade transformation over the past decade and its effect over industrial CO{sub 2} emissions. Change in trade patterns has significantly impacted many aspects of the Taiwan economy, subsequently resulting in various influences on industrial CO{sub 2} emissions, as shown by empirical analysis results. Change in export level increased industrial CO{sub 2} emissions, above all other effects, by 72.1%. However, changes in export mix and import coefficients imposed effects of dragging down industrial CO{sub 2} emissions by 5.7% and 11.7%, respectively.

  5. Rectal sonography before and after radiation treatment in inoperable cervical cancer

    International Nuclear Information System (INIS)

    Deutinger, J.; Bernaschek, G.; Tatra, G.

    1989-01-01

    Transrectal sonography is helpful in the classification of parametrial infiltration prior to treatment as well as in the follow-up. In this study, we performed rectal sonography in cases of inoperable cervical cancer to objectify the reduction of the infiltration of the uterine cervix and of the parametrium. Rectosonography was performed in 10 patients with histologically confirmed cancer of the uterine cervix before and after radiation treatment. The patients were treated with brachytherapy and teletherapy with an average radiation dose of 7680 rad. The whole therapy was finished after 6 to 9 weeks. Rectosonography enabled us to objectify the effect of radiation therapy. The length and width of parametrial infiltration could be measured in relation to the pelvis wall. Furthermore, the configuration of the parametrium could be imaged. Therefore, in cervical cancer, rectosonography is a valuable method to check and the documentate the effect of treatment and to diagnose recurrency. (orig.) [de

  6. Incidentally Detected Inoperable Malignant Pheochromocytoma with Hepatic Metastasis Treated by Transcatheter Arterial Chemoembolization

    Directory of Open Access Journals (Sweden)

    Joong Keun Kim

    2014-12-01

    Full Text Available Malignant pheochromocytoma (PCC is a rare condition. Although the liver is the second most frequent site of metastasis in malignant PCC, no definite treatments have been established. Herein, we report a case of liver metastasis of PCC that was successfully treated by transcatheter arterial chemoembolization (TACE. A 69-year-old man was admitted to the Department of Gastroenterology for evaluation of an incidental hepatic mass in August 2013. He had undergone right adrenalectomy in May 2005 and PCC had been confirmed on the basis of histopathological findings. Liver biopsy was performed, and metastatic PCC was diagnosed. The lesion appeared inoperable because of invasion of the portal vein and metastases in the lymph nodes along the hepatoduodenal ligament. Thus, TACE was performed instead. After TACE, symptoms including dizziness and cold sweating improved, and the patient's serum catecholamine levels decreased. On the basis of this case, we believe that TACE may be a useful treatment for liver metastasis in malignant PCC.

  7. Stereotactic body radiation therapy as an ablative treatment for inoperable hepatocellular carcinoma.

    Science.gov (United States)

    Huertas, Andres; Baumann, Anne-Sophie; Saunier-Kubs, Fleur; Salleron, Julia; Oldrini, Guillaume; Croisé-Laurent, Valérie; Barraud, Hélène; Ayav, Ahmed; Bronowicki, Jean-Pierre; Peiffert, Didier

    2015-05-01

    To describe efficacy and safety of stereotactic body radiation therapy (SBRT) for the treatment of inoperable hepatocellular carcinoma. The records of 77 consecutive patients treated with SBRT for 97 liver-confined HCC were reviewed. A total dose of 45Gy in 3 fractions was prescribed to the 80% isodose line. Local control (LC), overall survival (OS), progression-free survival (PFS) and toxicity were studied. The median follow-up was 12months. The median tumor diameter was 2.4cm. The LC rate was 99% at 1 and 2years. The 1 and 2-year OS were 81.8% and 56.6% respectively. The median time to progression was 9months (0-38). The rate of hepatic toxicity was 7.7% [1.6-13.7], 14.9% [5.7-23.2] and 23.1% [9.9-34.3] at 6months, 1year and 2years respectively. In multivariate analysis, female gender (HR 7.87 [3.14-19.69]), a BCLC B-C stage (HR 3.71 [1.41-9.76]), a sum of all lesion diameters ⩾2cm (HR 7.48 [2.09-26.83]) and a previous treatment (HR 0.10 [0.01-0.79]) were independent prognostic factors of overall survival. SBRT allows high local control for inoperable hepatocellular carcinomas. It should be considered when an ablative treatment is indicated in Child A patients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  8. Emissions Trading

    NARCIS (Netherlands)

    Woerdman, Edwin; Backhaus, Juergen

    2014-01-01

    Emissions trading is a market-based instrument to achieve environmental targets in a cost-effective way by allowing legal entities to buy and sell emission rights. The current international dissemination and intended linking of emissions trading schemes underlines the growing relevance of this

  9. CO2 emissions embodied in international trade: evidence for Spain

    International Nuclear Information System (INIS)

    Sanchez-Choliz, Julio; Duarte, Rosa

    2004-01-01

    The objective of this paper is to analyse the sectoral impacts that Spanish international trade relations have on present levels of atmospheric pollution using an input-output model. We try to evaluate the exports and imports of the Spanish economy in terms of the direct and indirect CO 2 emissions (CO 2 embodied) generated in Spain and abroad. The results show a slightly exporting behaviour in the Spanish economy which, nevertheless, hides important pollution interchanges. Moreover, the sectors transport material, mining and energy, non-metallic industries, chemical and metals are the most relevant CO 2 exporters and other services, construction, transport material and food the biggest CO 2 importers, and those whose final demands also embody more than 70% of the CO 2 emissions

  10. A Network of Networks Perspective on Global Trade.

    Science.gov (United States)

    Maluck, Julian; Donner, Reik V

    2015-01-01

    Mutually intertwined supply chains in contemporary economy result in a complex network of trade relationships with a highly non-trivial topology that varies with time. In order to understand the complex interrelationships among different countries and economic sectors, as well as their dynamics, a holistic view on the underlying structural properties of this network is necessary. This study employs multi-regional input-output data to decompose 186 national economies into 26 industry sectors and utilizes the approach of interdependent networks to analyze the substructure of the resulting international trade network for the years 1990-2011. The partition of the network into national economies is observed to be compatible with the notion of communities in the sense of complex network theory. By studying internal versus cross-subgraph contributions to established complex network metrics, new insights into the architecture of global trade are obtained, which allow to identify key elements of global economy. Specifically, financial services and business activities dominate domestic trade whereas electrical and machinery industries dominate foreign trade. In order to further specify each national sector's role individually, (cross-)clustering coefficients and cross-betweenness are obtained for different pairs of subgraphs. The corresponding analysis reveals that specific industrial sectors tend to favor distinct directionality patterns and that the cross-clustering coefficient for geographically close country pairs is remarkably high, indicating that spatial factors are still of paramount importance for the organization of trade patterns in modern economy. Regarding the evolution of the trade network's substructure, globalization is well-expressed by trends of several structural characteristics (e.g., link density and node strength) in the interacting network framework. Extreme events, such as the financial crisis 2008/2009, are manifested as anomalies superimposed to

  11. Frameworks for comparing emissions associated with production, consumption, and international trade.

    Science.gov (United States)

    Kanemoto, Keiichiro; Lenzen, Manfred; Peters, Glen P; Moran, Daniel D; Geschke, Arne

    2012-01-03

    While the problem of climate change is being perceived as increasingly urgent, decision-makers struggle to agree on the distribution of responsibility across countries. In particular, representatives from countries hosting emissions-intensive exporting industries have argued that the importers of emissions-intensive goods should bear the responsibility, and ensuing penalties. Indeed, international trade and carbon leakage appear to play an increasingly important role in the carbon emissions debate. However, definitions of quantities describing the embodiment of carbon emissions in internationally traded products, and their measurement, have to be sufficiently robust before being able to underpin global policy. In this paper we critically examine a number of emissions accounting concepts, examine whether the ensuing carbon balances are compatible with monetary trade balances, discuss their different interpretations, and highlight implications for policy. In particular, we compare the emissions embodied in bilateral trade (EEBT) method which considers total trade flows with domestic emission intensities, with the multi-regional input-output (MRIO) method which considers trade only into final consumption with global emission intensities. If consumption-based emissions of different countries were to be compared, we would suggest an MRIO approach because of the global emissions coverage inherent in this method. If trade-adjusted emission inventories were to be compared, we would suggest an EEBT approach due to the consistency with a monetary trade balance.

  12. Foreign Trade

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Foreign Trade database has monthly volume and value information for US imports, exports, and re-exports of fishery or fishery derived products. Data is...

  13. Trade marketing

    OpenAIRE

    Khodl, Vojtěch

    2013-01-01

    The main objective of this thesis is to define the term "trade marketing" and evaluate its role within the Coca-Cola Hellenic Bottling Company. With the use of internal resources and relevant literature, I will describe the use of trade marketing from both theoretical and practical point of view. I will also introduce the Coca-Cola HBC and its position on the carbonated soft drinks market in the Czech republic.

  14. Simultaneous integrated boost-intensity modulated radiation therapy for inoperable hepatocellular carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Hyun; Park, Joong-Won; Kim, Yeon-Joo; Kim, Bo Hyun; Woo, Sang Myung; Moon, Sung Ho; Kim, Sang Soo; Lee, Woo Jin; Kim, Dae Yong; Kim, Chang-Min [National Cancer Center, Center for Liver Cancer, Research Institute and Hospital, Goyang-si, Gyeonggi-do (Korea, Republic of)

    2014-10-15

    The aim of this work was to evaluate the clinical efficacy and safety of simultaneous integrated boost-intensity modulated radiation therapy (SIB-IMRT) in patients with inoperable hepatocellular carcinoma (HCC). A total of 53 patients with inoperable HCC underwent SIB-IMRT using two dose-fractionation schemes, depending on the proximity of gastrointestinal structures. The 41 patients in the low dose-fractionation (LD) group, with internal target volume (ITV) < 1 cm from gastrointestinal structures, received total doses of 55 and 44 Gy in 22 fractions to planning target volume 1 (PTV1) and 2 (PTV2), respectively. The 12 patients in the high dose-fractionation (HD) group, with ITV ≥ 1 cm from gastrointestinal structures, received total doses of 66 and 55 Gy in 22 fractions to the PTV1 and PTV2, respectively. Overall, treatment was well tolerated, with no grade > 3 toxicity. The LD group had larger sized tumors (median: 6 vs. 3.4 cm) and greater frequencies of vascular invasion (80.6 vs. 16.7 %) than patients in the HD group (p < 0.05 each). The median overall survival (OS) was 25.1 months and the actuarial 2-year local progression-free survival (LPFS), relapse-free survival (RFS), and OS rates were 67.3, 14.7, and 54.7 %, respectively. The HD group tended to show better tumor response (100 vs. 62.2 %, p = 0.039) and 2-year LPFS (85.7 vs. 59 %, p = 0.119), RFS (38.1 vs. 7.3 %, p = 0.063), and OS (83.3 vs. 44.3 %, p = 0.037) rates than the LD group. Multivariate analysis showed that tumor response was significantly associated with OS. SIB-IMRT is feasible and safe for patients with inoperable HCC. (orig.) [German] Ziel der Arbeit war es, die klinische Wirksamkeit und die Sicherheit der intensitaetsmodulierten Radiotherapie mit simultanem integriertem Boost (SIB-IMRT) fuer Patienten mit einem inoperablen hepatozellulaeren Karzinom (HCC) zu evaluieren. Bei 53 Patienten mit inoperablem HCC wurden zwei unterschiedliche Dosierungskonzepte je nach Lagebeziehung des

  15. Brachytherapy-related complications for medically inoperable Stage I endometrial carcinoma

    International Nuclear Information System (INIS)

    Chao, Clifford K. S.; Grigsby, Perry W.; Perez, Carlos A.; Camel, H. Marvin; Kao, Ming-Shian; Galakatos, Andrew E.; Boyle, Walter A.

    1995-01-01

    Purpose: The current study was conducted to investigate the incidence and risk factors for medical complications associated with low dose rate brachytherapy in patients with medically inoperable Stage I endometrial cancer treated with irradiation alone. Methods and Materials: From 1965 through 1991 at Mallinckrodt Institute of Radiology, 150 implants were performed on 96 patients who were deemed medically unfit for hysterectomy because of advanced age, obesity, and various medical problems. The records of these patients were examined retrospectively to determine the incidence of medical complications that occurred in the first 30 days following the initiation of brachytherapy. The association of risk factors that precluded major surgery and the occurrence of brachytherapy-related complications was examined by logistic regression. Results: Of these 96 patients, 40 patients were older than 75 years, and 31 patients were deemed morbidly obese. Medical problems included hypertension in 45 patients, and diabetes in 37; there was a history of congestive heart failure in 23, stroke in 11, myocardial infarction in 10, and thromboembolism in 8. There were concurrent malignancies in five patients. Implants were performed using intrauterine Simon-Heyman capsules, tandems, and vaginal ovoids in all patients. General anesthesia was used for 98 implants, spinal anesthesia for 26, local anesthesia for 25, and epidural anesthesia for 1. The duration of anesthesia ranged from 30 to 120 min (median, 60 min). The duration of radioisotope application ranged from 11 to 96 h (median, 46 h). Preventive measures included low dose subcutaneous heparin in 55 patients (since 1978), and intermittent pneumatic compression boots in 29 (since 1985). Four patients developed life-threatening complications including myocardial infarction (two patients), congestive heart failure (one patient), and pulmonary embolism (one patient). Two of these four patients died; one with a myocardial infarction and

  16. Image-based intracavitary brachytherapy in the treatment of inoperable uterine cancer: individualized dose specification

    International Nuclear Information System (INIS)

    Kim, R.Y.; Falkenberg, E.

    2003-01-01

    With advances in imaging studies, dose specification of uterine cancer can be defined at the specific sites such as the myometrium or the serosal surface rather than arbitutary points or mghrs. This report presents our experience with image-based brachytherapy for inoperable uterine cancer. Seven patients with organ-confined uterine cancer (2 stage I G1, 2 stage I G2, 3 stage 1 G3) underwent definitive radiation therapy due to poor medical condition. All of the patients underwent a CT or MRI scan of the pelvis prior to intracavitary application. Based on the size of the uterine cavity, a single channel intrauterine applicator was selected for a small uterus and a multiple channel intrauterine applicator was used for a larger uterus as well as colpostats in the upper vagina. All of the patients underwent cervical dilation and insertion of intrauterine device under the guidance of real-time ultrasound in the operating room. A CT or MRI scan of the pelvis was performed with the applicator in place in addition to orthogonal pelvic films. Dose specification was 75 Gy to the mid-myometrium and less than 50 Gy to the serosal surface of the uterus. Three patients with stage I G1-2 disease had intracavitary brachytherapy alone. Four patients with stage I G2-3 disease were treated with a combination of external pelvic radiation and intracavitary brachytherapy. Five patients had low-dose rate brachytherapy and two patients had high-dose rate brachytherapy. Five patients had a single channel intrauterine brachytherapy and two patients had multiple channel brachytherapy. Based on the CT or MRI measurements of the uterine wall thickness, 75Gy was prescribed at 1.5 cm from the midline of the uterus in 4 patients and at 2.0 cm in 3 patients. The medium follow-up time after radiation treatment was 23 months. Five patients are alive without evidence of disease and two patients died of other causes. All patients had local control without major side effects. Image-based brachytherapy

  17. Intracisternal ziconotide infusion. Clinical case of an inoperable pharynx cancer patient with severe cervico-facial pain syndrome

    OpenAIRE

    Sergio Mameli; Giovanni Maria Pisanu; Angela Maria Pili; Maura Carboni

    2015-01-01

    The authors describe the clinical case of a patient suffering from severe cervico-facial pain syndrome with great incident component from inoperable pharynx cancer. The patient that was poorly responding to systemic therapy with high doses of opioids, benefi ted from intrathecal administration of ziconotide in combination with morphine and bupivacaine. After a long period of effectiveness (16 months), the patient complained of pain recurrence.The increase of ziconotide dose caused a ser...

  18. Prognostic Impact of Inflammation-related Biomarkers on Overall Survival of Patients with Inoperable Malignant Pleural Mesothelioma.

    Science.gov (United States)

    Otoshi, Takehiro; Kataoka, Yuki; Kaku, Sawako; Iki, Reika; Hirabayashi, Masataka

    2018-01-01

    The aim of the present study was to assess the prognostic utility of the pretreatment blood neutrophil-to-lymphocyte ratio (NLR) and the C-reactive protein-to-albumin ratio (CAR) in patients with inoperable malignant pleural mesothelioma (MPM). The medical records of consecutive patients with histologically confirmed MPM from our hospital between January 2007 and August 2017 were retrospectively reviewed. The primary outcome was overall survival (OS). Univariate and multivariate analyses for the prognostic factors were performed using a Cox proportional hazards model. A total of 143 patients with inoperable MPM were included. On multivariate analysis, pretreatment CAR was an independent factor associated with worse OS (hazard ratio(HR)=1.72; 95% confidence interval(CI)=1.11-2.67; p=0.016). However, NLR was not associated with OS in any of the analyses. CAR appears to be a prognostic factor in patients with inoperable MPM. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

  19. Long-term survival in inoperable squamous cell carcinoma of the lung

    International Nuclear Information System (INIS)

    Ono, Ryosuke; Egawa, Sunao

    1988-01-01

    Radiotherapy is the first treatment of choice in cases of inoperable lung cancer. This paper reported the indications and limitations of radiotherapy for squamous cell carcinoma of the lung, based on the results of long-term survivors among non-resected squamous cell carcinoma. Materials consisted of 372 cases of squamous cell carcinoma of the lung treated with radiotherapy at the National Cancer Center Hospital between May 1962 and December 1980. Histopathological diagnosis was confirmed by biopsy in all cases. Among the 372 cases, 8 survived more than 5 years. Analyzing these 8 cases according to the TNM classification of the UICC, 7 were stage I, 1 was stage II, and there were no long-term survivors with stage III or IV. Of the 8 cases only one is alive. Analyzing 7 the fatal cases, 2 succumbed due to hepatic or brain metatasis following local recurrence and one had double primary cancer of the pancreas. The remaining 4 cases did not show recurrence or metastasis and succumbed due to pneumonia or myocardial infarct. (author)

  20. Active but inoperable thrombin is accumulated in a plasma protein layer surrounding Streptococcus pyogenes.

    Science.gov (United States)

    Naudin, Clément; Hurley, Sinead M; Malmström, Erik; Plug, Tom; Shannon, Oonagh; Meijers, Joost C M; Mörgelin, Matthias; Björck, Lars; Herwald, Heiko

    2015-10-01

    Activation of thrombin is a critical determinant in many physiological and pathological processes including haemostasis and inflammation. Under physiological conditions many of these functions are involved in wound healing or eradication of an invading pathogen. However, when activated systemically, thrombin can contribute to severe and life-threatening conditions by causing complications such as multiple multi-organ failure and disseminated intravascular coagulation. In the present study we investigated how the activity of thrombin is modulated when it is bound to the surface of Streptococcus pyogenes. Our data show that S. pyogenes bacteria become covered with a proteinaceous layer when incubated with human plasma, and that thrombin is a constituent of this layer. Though the coagulation factor is found attached to the bacteria with a functional active site, thrombin has lost its capacity to interact with its natural substrates and inhibitors. Thus, the interaction of bacteria with human plasma renders thrombin completely inoperable at the streptococcal surface. This could represent a host defense mechanism to avoid systemic activation of coagulation which could be otherwise induced when bacteria enter the circulation and cause systemic infection.

  1. Image cytometric nuclear texture features in inoperable head and neck cancer: a pilot study

    International Nuclear Information System (INIS)

    Strojan-Flezar, Margareta; Lavrencak, Jaka; Zganec, Mario; Strojan, Primoz

    2011-01-01

    Image cytometry can measure numerous nuclear features which could be considered a surrogate end-point marker of molecular genetic changes in a nucleus. The aim of the study was to analyze image cytometric nuclear features in paired samples of primary tumor and neck metastasis in patients with inoperable carcinoma of the head and neck. Image cytometric analysis of cell suspensions prepared from primary tumor tissue and fine needle aspiration biopsy cell samples of neck metastases from 21 patients treated with concomitant radiochemotherapy was performed. Nuclear features were correlated with clinical characteristics and response to therapy. Manifestation of distant metastases and new primaries was associated (p<0.05) with several chromatin characteristics from primary tumor cells, whereas the origin of index cancer and disease response in the neck was related to those in the cells from metastases. Many nuclear features of primary tumors and metastases correlated with the TNM stage. A specific pattern of correlation between well-established prognostic indicators and nuclear features of samples from primary tumors and those from neck metastases was observed. Image cytometric nuclear features represent a promising candidate marker for recognition of biologically different tumor subgroups

  2. Prognostic factors for patients with inoperable non-small cell lung cancer, limited disease

    International Nuclear Information System (INIS)

    Kaasa, S.; Mastekaasa, A.; Lund, E.

    1989-01-01

    In a prospective controlled clinical trial, 102 patients with inoperable non-small lung cancer (NSCLC), limited disease, stage II and III were treated with combination chemotherapy, cisplatin 70 mg/m 2 i.v. on day one and etoposide 100 mg/m 2 i.v. on day one, and etoposide 200 mg/m 2 orally on days 2 and 3, or radiotherapy given in 15 fractions of 2.8 Gy with two anterior/posterior fields during a period of three weeks. The patients completed a validated self-administered questionnaire before the start of treatment that assessed their psychosocial well-being, disease-related symptoms, personal functioning, and every day activity. These subjective varibles were evaluated together with treatment modality, WHO performance status, weight loss, and stage of disease, with regard to their value in predicting survival. Univariate survival analyses were undertaken for each individual factor, median survival was calculated according to life-table analyses. A step-wise multiple regression analysis was used to measure the prognostic value of the various factors. In the univariate analysis, general symptons (p=0.0006) psychosocial well-being (p=0.0002) and stage of disease (p=0.007) were the best predictive factors. In the multiple regression analyses the subjective variables, general symptons (p<0.01) and psychosocial well-being (p<0.05) were shown to have the best predictive value for the patients' survival. (author). 20 refs.; 4 figs.; 3 tabs

  3. Medically inoperable stage I endometrial carcinoma: a few dilemmas in radiotherapeutic management

    International Nuclear Information System (INIS)

    Chao, Clifford K. S.; Grigsby, Perry W.; Perez, Carlos A.; Mutch, David G.; Herzog, Thomas; Camel, H. Marvin

    1996-01-01

    Purpose: The aggressiveness of radiation therapy for patients with medically inoperable endometrial carcinoma is controversial. Patients may die of their underlining medical disease before succumbing to cancer. We try to identify certain subgroup of patients who might benefit most from an aggressive approach and also investigate the impact of residual tumor present in dilatation and curettage (D and C) specimen obtained in second intracavitary implant (ICI). Methods and Materials: From 1965 to 1990, 101 patients were treated for clinical clinical Stage I endometrial carcinoma with RT alone due to medical problems. Ages ranged from 39 to 94 years (median 71 years). There were 18 patients with clinical Stage IA and 83 with clinical Stage IB disease. Histology included 44 well-differentiated, 37 moderately differentiated, and 20 poorly differentiated tumors. Radiation therapy consisted of external beam only in 3 patients, ICI alone in 26, whole pelvis plus ICI in 10, and whole pelvis plus split field plus ICI in 62. A second D and C was performed on 26 patients at the time of the second ICI. Minimum follow-up was 2 years (median, 6.3 years). Results: The 5-year actuarial disease-free survival (DFS) for the studied cohort is comparable to the expected survival of an age-matched population. Pelvic control was 100% for Stage IA and 88% for Stage IB with 5-year disease-free survivals of 80 and 84%, respectively. We also observed a greater disassociation of DFS and overall survival among patients older than 75 years (84 and 55%, respectively) than in younger patients (84 and 78%, respectively). This is mainly because older patients succumbed to their medical illness. Well-differentiated disease demonstrated the trend toward a better outcome than moderately or poorly differentiated lesions in Stage IB patients (p 0.05), but not in Stage IA patients. Aggressive radiation therapy approach showed the trend toward a better result in Stage IB patients 75 years of age or younger

  4. A new score for screening of malnutrition in patients with inoperable gastric adenocarcinoma.

    Science.gov (United States)

    Esfahani, Ali; Somi, Mohammad Hossein; Asghari Jafarabadi, Mohammad; Ostadrahimi, Alireza; Ghayour Nahand, Mousa; Fathifar, Zahra; Doostzadeh, Akram; Ghoreishi, Zohreh

    2017-06-01

    Malnutrition is common in patients with gastric cancer. Early identification of malnourished patients results in improving quality of life. We aimed to assess the nutritional status of patients with inoperable gastric adenocarcinoma (IGA) and finding a precise malnutrition screening score for these patients before the onset of chemotherapy. Nutritional status was assessed using patient generated subjective global assessment (PG-SGA), visceral proteins, and high-sensitivity C reactive protein. Tumor markers of carcinoembryonic antigen (CEA), carbohydrate antigen 125 (CA-125) and CA 19-9 and their association with nutritional status were assessed. Then a new score for malnutrition screening was defined. Seventy-one patients with IGA completed the study. Malnourished and well-nourished patients (based on PG-SGA) were statistically different regarding albumin, prealbumin and CA-125. The best cut-off value for prealbumin for prediction of malnutrition was determined at 0.20 mg/dl and using known cut-off values for albumin (3.5 g/dl) and CA-125 (35 U/ml), a new score was defined for malnutrition screening named MS-score. According to MS-score, 92% of the patients had malnutrition and it could predict malnutrition with 96.8% sensitivity, 50% specificity and accuracy of 91.4%. MS-score has been suggested as an available and easy-to-use tool for malnutrition screening in patients with IGA. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  5. ACCELERATED HYPERFRACTIONATED RADIOTHERAPY IN THE TREATMENT FOR INOPERABLE, LOCALLY ADVANCED GASTRIC CANSER

    Directory of Open Access Journals (Sweden)

    S. S. Litinskiy

    2015-01-01

    Full Text Available Purpose: to compare survival of patients with locally advanced inoperable gastric cancer (LAIGC, receiving accelerated hyperfractionated (AHF or conventionally fractionated (CF radiation therapy (RT. Methods and Materials. Between November 1993 and March 2010, 137 patients with LAIGC receiving CF (2 Gy daily or AHF (1.3 Gy b.i.d. to total at least 50 Gy RT in combination or without chemotherapy were retrospectively selected from the hospital database of Arkhangelsk clinical oncological dispensary. Overall survival (OS assessed using actuarial analysis, Kaplan – Meier method and Cox regression. results. The CF and AHF groups were 102 and 35 patients, respectively. Median follow-up time for all patients was 12 years. By the time of analysis 123 (90 % patients of all cohort died. Median, 7-year survival were 24 (95 % confidence intervals (CI, 17–31 vs 16 (95 % CI, 11–21 months, hazard ratio (HR=0.71 (95 % CI, 0.46–1.06, р=0.097; and 19 % (95 % CI 8–34 % vs 6% (95 % CI 2–13 % in the AHF and CF groups, respectively. In multivariate OS model the difference decreased to HR=0.87 (95 % CI, 0.49–1.55. The location of the tumor in median third (HR=0.60, 95 % CI, 0.37–0.99 in refer to upper third was the only independent factor influencing survival.  There was no influence of the total dose in chosen level on survival. conclusion. Our retrospective shows trend towards better OS for those LAIGC patients receiving RT in AHF regimen compared to CF. The prospective randomized study with conformal radiation technics is necessary to confirm these findings.

  6. Motivation and preferences of exercise programmes in patients with inoperable metastatic lung cancer: a need assessment.

    Science.gov (United States)

    Kartolo, Adi; Cheng, Susanna; Petrella, Teresa

    2016-01-01

    The aim of this study is to investigate the motivation, ability, preferences, and perceived potential facilitating factors/barriers of patients with inoperable metastatic lung cancer towards exercise programmes. This is a cross-sectional study using survey adopting the Theory of Planned Behaviour (TPB) to obtain patients' experience recruited through Odette Cancer Centre, Sunnybrook Health Sciences Complex. Results were expressed in percentages, P value, and Spearman's rho. Sixty patients were recruited from January 2014 to April 2014. Patients generally had a high level across TPB measures, with 63% of them indicating that they have the motivation to exercise. Significant association in relation to motivation was established on attitudes (importance, P = 0.005, rho = 0.326; helpfulness, P = 0.015, rho = 0.348; and easiness, P = 0.001, rho = 0.375) and subjective norm of close members (P = 0.0069, rho = 0.348) and healthcare professionals (P = 0.012, rho = 0.328). Being a non-smoker (P = 0.042, rho = 0.311), having a past exercise history prior to diagnosis (P = 0.000, rho = 0.563), and absence of COPD (P = 0.016, rho = -0.312) were also shown to have a significant association with motivation to exercise. Patients were motivated to participate in an exercise programme despite contrary belief; however, they might have limited ability and preferred light intensity type of exercise such as walking. Their motivation to exercise was driven by different factors when compared to other cancer patient populations. Thus, it is important for healthcare professionals to understand the factors influencing their motivation and increase their awareness (only 26% of patients indicated receiving advice regarding exercise) to better the care towards patients with metastatic lung cancer.

  7. Combined cetuximab and reirradiation for locoregional recurrent and inoperable squamous cell carcinoma of the head and neck

    Energy Technology Data Exchange (ETDEWEB)

    Balermpas, Panagiotis; Roedel, Claus; Weiss, Christian [Dept. of Radiation Therapy and Oncology, Goethe Univ., Frankfurt/Main (Germany); Hambek, Markus [Dept. of Otorhinolaryngology, Goethe Univ., Frankfurt/Main (Germany); Seitz, Oliver [Dept. of Oral Maxillofacial and Plastic Facial Surgery, Goethe Univ., Frankfurt/Main (Germany)

    2009-12-15

    Purpose: to investigate the feasibility, toxicity, and efficacy of external-beam reirradiation (Re-RT) combined with cetuximab for patients with inoperable and recurrent squamous cell carcinoma of the head and neck (SCCHN). Patients and methods: seven patients with inoperable recurrence of SCCHN after adjuvant or definitive radiotherapy (RT) and simultaneous or sequential cisplatin-based chemotherapy for primary SCCHN were treated between August and December 2008 with Re-RT (1.8 Gy/fraction to 50.4 Gy) and cetuximab (400 mg/m{sup 2} initial dose in the 1st week, and then 250 mg/m{sup 2} once weekly). Recurrence had to be located at least {>=} 50% in the preirradiated field. Long term toxicity from previous treatment was recorded before Re-RT as a baseline value. Acute and late toxicity derived from the experimental regimen were recorded every week during RT, and then every 3 months. Efficacy was assessed with repeated imaging using response evaluation criteria in solid tumors (RECIST) and clinical examinations 8-12 weeks after end of the treatment and every 3 months thereafter (Tables 1 and 2). Results: only mild localized mucositis occurred in all patients. Two patients developed a grade 3 acneiform rash related to cetuximab. After treatment one patient developed a grade 2 trismus, another showed grade 3 abacterial salivary gland inflammation with severe pain requiring opioid medication. Two patients achieved a complete response after 7 months, one remained stable, three progressed, and one died from pneumonia without having restaging magnetic resonance imaging. Conclusion: A second course of RT combined with cetuximab in patients with inoperable, recurrent HNSCC proved to be feasible with mild or moderate toxicity and encouraging response to treatment. (orig.)

  8. Older patients with inoperable non-small cell lung cancer. Long-term survival after concurrent chemoradiotherapy

    International Nuclear Information System (INIS)

    Semrau, Sabine; Fietkau, Rainer; Zettl, Heike; Hildebrandt, Guido; Klautke, Gunther

    2014-01-01

    Considering the various comorbidities associated with aging, the feasibility and usefulness of concurrent chemoradiotherapy (CRT) in older patients with inoperable non-small cell lung cancer (NSCLC) is a controversial issue. Here, we compared the feasibility of CRT and the effects of various comorbidities on the prognosis of a minimally selected population of inoperable NSCLC patients aged 60-77 years. The study comprised 161 patients with inoperable NSCLC who received CRT with a target radiation dose greater than 60 Gy and platinum-based chemotherapy from 1998 to 2007. The total population included 69 patients aged 60-69 years and 53 aged 70-77 years. These two age cohorts were included in the study with a follow-up of a median 14.5 months. The two groups showed no differences in long-term survival, as reflected by the 5-year survival rates of 13.0 ± 4.1 % (60- to 69-year-olds) and 14.4 ± 4.9 % (70- to 77-year-olds). During the treatment phase, the groups were comparable in terms of toxicity and the feasibility of chemotherapy. Compared to patients in their 60s, the septuagenarians had more pulmonary comorbidities (p = 0.02), diabetes mellitus (p = 0.04), cardiac comorbidities (p = 0.08), and previous cancer disease (p = 0.08) that exerted a negative effect on survival. In patients without comorbidities, there were no differences between the age groups. Age is not a contraindication for concurrent CRT per se, because elderly patients do not have a worse long-term prognosis than younger seniors. However, ''elderly patients'' (≥ 70-77 years) have more concomitant diseases associated with shorter survival than ''moderately aged patients'' (≥ 60-69 years). (orig.) [de

  9. Exercise Training Improves Exercise Capacity and Quality of Life in Patients with Inoperable or Residual Chronic Thromboembolic Pulmonary Hypertension

    Science.gov (United States)

    Herb, Jochen; Ehlken, Nicola; Fischer, Christine; Reichenberger, Frank; Rosenkranz, Stephan; Seyfarth, Hans-Juergen; Mayer, Eckhard

    2012-01-01

    Background Aim of this prospective study was to evaluate the effects of exercise training in patients with inoperable or residual chronic thromboembolic pulmonary hypertension (CTEPH). Methods Thirty-five consecutive patients with invasively confirmed inoperable or residual CTEPH (16 women;19 men; mean age 61±15 years, mean pulmonary artery pressure, 63±20 mmHg; primary inoperable n = 33, persisting pulmonary hypertension after pulmonary endarterectomy n = 2) on stable disease-targeted medication received exercise training in-hospital for 3 weeks and continued at home for 15 weeks. Medication remained unchanged during the study period. Efficacy parameters have been evaluated at baseline, after 3 and 15 weeks by blinded-observers. Survival rate has been evaluated in a follow-up period of median 36.4 months (interquartile range 26.6–46.6 months). Results All patients tolerated exercise training without severe adverse events. Patients significantly improved the mean distance walked in 6 minutes compared to baseline by 61±54 meters after 3 weeks (p<0.001) and by 71±70 meters after 15 weeks (p = 0.001), as well as scores of quality-of-life questionnaire, peak oxygen consumption and maximal workload. NT-proBNP improved significantly after 3 weeks of exercise training (p = 0.046). The 1-year survival rate was 97%, 2-year survival rate was 94% and the 3-year-survival 86% respectively. Conclusion Training as add-on to medical therapy may be effective in patients with CTEPH to improve work capacity, quality of life and further prognostic relevant parameters and possibly improves the 1-, 2- and 3-year survival rate. Further multicentric randomized controlled studies are needed to confirm these promising results. Trial Registration ClinicalTrials.gov NCT01398345 PMID:22848542

  10. Combined cetuximab and reirradiation for locoregional recurrent and inoperable squamous cell carcinoma of the head and neck

    International Nuclear Information System (INIS)

    Balermpas, Panagiotis; Roedel, Claus; Weiss, Christian; Hambek, Markus; Seitz, Oliver

    2009-01-01

    Purpose: to investigate the feasibility, toxicity, and efficacy of external-beam reirradiation (Re-RT) combined with cetuximab for patients with inoperable and recurrent squamous cell carcinoma of the head and neck (SCCHN). Patients and methods: seven patients with inoperable recurrence of SCCHN after adjuvant or definitive radiotherapy (RT) and simultaneous or sequential cisplatin-based chemotherapy for primary SCCHN were treated between August and December 2008 with Re-RT (1.8 Gy/fraction to 50.4 Gy) and cetuximab (400 mg/m 2 initial dose in the 1st week, and then 250 mg/m 2 once weekly). Recurrence had to be located at least ≥ 50% in the preirradiated field. Long term toxicity from previous treatment was recorded before Re-RT as a baseline value. Acute and late toxicity derived from the experimental regimen were recorded every week during RT, and then every 3 months. Efficacy was assessed with repeated imaging using response evaluation criteria in solid tumors (RECIST) and clinical examinations 8-12 weeks after end of the treatment and every 3 months thereafter (Tables 1 and 2). Results: only mild localized mucositis occurred in all patients. Two patients developed a grade 3 acneiform rash related to cetuximab. After treatment one patient developed a grade 2 trismus, another showed grade 3 abacterial salivary gland inflammation with severe pain requiring opioid medication. Two patients achieved a complete response after 7 months, one remained stable, three progressed, and one died from pneumonia without having restaging magnetic resonance imaging. Conclusion: A second course of RT combined with cetuximab in patients with inoperable, recurrent HNSCC proved to be feasible with mild or moderate toxicity and encouraging response to treatment. (orig.)

  11. Clinical potential of boron neutron capture therapy for locally recurrent inoperable previously irradiated head and neck cancer

    International Nuclear Information System (INIS)

    Lim, Diana; Quah, Daniel SC; Leech, Michelle; Marignol, Laure

    2015-01-01

    This review compares the safety and efficacy of boron neutron capture therapy (BNCT) in the treatment of previously irradiated, inoperable locoregional recurrent HNC patients and compares BNCT against the standard treatment of platinum-based chemotherapy. Our analysis of published clinical trials highlights efficacy of BNCT associated with mild side effects. However, the use of BNCT should be explored in stratified randomised trials. - Highlights: • BNCT can prolong median overall survival. • BNCT can be associated with severe adverse effects. • BNCT may be comparable to chemotherapy-based regimens. • BNCT may be comparable to re-irradiation techniques regimens in patients with low performance status.

  12. When operable patients become inoperable: conversion of a surgical aortic valve replacement into transcatheter aortic valve implantation

    DEFF Research Database (Denmark)

    Olsen, Lene Kjaer; Arendrup, Henrik; Engstrøm, Thomas

    2009-01-01

    Transcatheter aortic valve implantation (TAVI) is a relatively new treatment option for inoperable patients with severe aortic stenosis (AS). This case describes how a planned conventional surgical aortic valve replacement (AVR) on a 73-year-old woman was successfully converted to a TAVI procedure....... On extracorporal circulation it was reconized that the aortic annulus, the coronary ostiae and the proximal part of the ascending aorta were severely calcified making valve implantation impossible. Surgical closure without valve substitution was estimated to be associated with a high risk of mortality due...

  13. Prognostic value of CXCL12 and CXCR4 in inoperable head and neck squamous cell carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Rave-Fraenk, Margret; Tehrany, Narges; Leu, Martin; Weber, Hanne Elisabeth; Wolff, Hendrik Andreas [University Medical Center Goettingen, Department of Radiotherapy and Radiation Oncology, Goettingen (Germany); Kitz, Julia [University Medical Center Goettingen, Department of Pathology, Goettingen (Germany); Burfeind, Peter [University Medical Center Goettingen, Department of Human Genetics, Goettingen (Germany); Schliephake, Henning [University Medical Center Goettingen, Department of Oral and Maxillofacial Surgery, Goettingen (Germany); Canis, Martin [University Medical Center Goettingen, Department of Otorhinolaryngology, Head and Neck Surgery, Goettingen (Germany); Beissbarth, Tim [University Medical Center Goettingen, Institute of Medical Statistics, Goettingen (Germany); Reichardt, Holger Michael [University Medical Center Goettingen, Institute for Cellular and Molecular Immunology, Goettingen (Germany)

    2016-01-15

    The chemokine CXCL12 and its receptor CXCR4 can affect tumor growth, recurrence, and metastasis. We tested the hypothesis that the CXCL12 and CXCR4 expression influences the prognosis of patients with inoperable head and neck cancer treated with definite radiotherapy or chemoradiotherapy. Formalin-fixed paraffin-embedded pretreatment tumor tissue from 233 patients with known HPV/p16{sup INK4A} status was analyzed. CXCL12 and CXCR4 expressions were correlated with pretreatment parameters and survival data by univariate and multivariate Cox regression. CXCL12 was expressed in 43.3 % and CXCR4 in 66.1 % of the samples and both were correlated with HPV/p16{sup INK4A} positivity. A high CXCL12 expression was associated with increased overall survival (p = 0.036), while a high CXCR4 expression was associated with decreased metastasis-free survival (p = 0.034). A high CXCR4 expression could be regarded as a negative prognostic factor in head and neck cancer because it may foster metastatic spread. This may recommend CXCR4 as therapeutic target for combating head and neck cancer metastasis. (orig.) [German] Das Chemokin CXCL12 und sein Rezeptor CXCR4 beeinflussen Tumorwachstum, Auftreten von Rezidiven und Metastasierung. Es wurde die Hypothese geprueft, dass ein Zusammenhang der CXCL12- und CXCR4-Expression mit der Prognose von Patienten bestehe, die wegen eines inoperablen Kopf-Hals-Tumors eine primaere Radio- oder Radiochemotherapie erhielten. Dabei wurde auch der HPV-Status der Patienten beruecksichtigt. Formalinfixierte Proben aus unbehandelten Tumoren von 233 Patienten mit bekanntem HPV/p16{sup INK4A}-Status wurden ausgewertet. Die CXCL12- und CXCR4-Expression wurde mit klinischen Parametern und Ueberlebensdaten mittels uni- und multivariater Cox Regression analysiert. CXCL12 wurde von 43,3 %, CXCR4 von 66,1 % der Tumoren exprimiert, und beide Marker korrelierten mit einer HPV/p16{sup INK4A}-Expression. Eine hohe CXCL12-Expression war mit einem verbesserten

  14. 111In-pentetreotide therapy in patients with inoperable benign intracranial tumors

    International Nuclear Information System (INIS)

    Minutoli, F.; Sindoni, A.; Cardile, D.; Amato, E.; Cassalia, L.; Herberg, A.; Baldari, S.

    2015-01-01

    Full text of publication follows. Aim: in the last years Peptide Receptor Radionuclide Therapy (PRRT) acquired greater importance as an alternative or complementary treatment of neuroendocrine tumors (NETs) and other somatostatin receptor positive (sstr+) tumors. Many studies about PRRT using different radiopharmaceuticals, mainly 90 Y and 177 Lu (beta-emitters) labelled peptides, are reported in the literature. 177 Lu-labeled somatostatin analogues seem to be more effective because of their favourable physical properties and the better objective response. On the other hand, only few reports exist on PRRT using 111 In-Pentetreotide, an Auger-emitter. The aim of this study is to evaluate the usefulness of 111 In-Pentetreotide therapy in patients with sstr+ inoperable benign intracranial tumors in which the use of beta-emitters radiopharmaceuticals (characterized by higher penetration range) could be unsafe and questionable since lesions were close to critical anatomical structures, such as optic chiasm or medulla oblongata. Materials and methods: we retrospectively reviewed clinical records of 9 patients (7 Females and 2 Males) affected by sstr+ benign intracranial tumors (mean age: 58.4 years, range 50-81): 8 patients had meningiomas/meningiomatosis and 1 patient had a pituitary macroadenomas. A previous diagnostic scintigraphy with 111 In-Pentetreotide demonstrated high intralesional radiotracer uptake. All patients underwent PRRT with high therapeutic activities of 111 In-Pentetreotide (1-7 cycles, median 4 cycles, activity per cycle 3.7-7.5 GBq, median activity per cycle 7 GBq, cumulative activity range 13.7-66 GBq). Efficacy of PRRT was evaluated according to RECIST criteria. Toxicity was also assessed considering hematological parameters and GFR value estimated by renal dynamic scintigraphy. Results: no patient had acute damage. Complete response was observed in 1 patient (11.1%). Partial response was observed in 2 patients (22.2%); stable disease was observed

  15. Anonymous electronic trading versus floor trading

    OpenAIRE

    Franke, Günter; Hess, Dieter

    1995-01-01

    This paper compares the attractiveness of floor trading and anonymous electronic trading systems. It is argued that in times of low information intensity the insight into the order book of the electronic trading system provides more valuable information than floor trading, but in times of high information intensity the reverse is true. Thus, the electronic system's market share in trading activity should decline in times of high information intensity. This hypothesis is tested by data on BUND...

  16. Stereotactic radiotherapy of histologically proven inoperable stage I non-small cell lung cancer: Patterns of failure

    International Nuclear Information System (INIS)

    Andratschke, Nicolaus; Zimmermann, Frank; Boehm, Eva; Schill, Sabine; Schoenknecht, Christine; Thamm, Reinhard; Molls, Michael; Nieder, Carsten; Geinitz, Hans

    2011-01-01

    Background and purpose: To report patterns of failure of stereotactic body radiation therapy (SBRT) in inoperable patients with histologically confirmed stage I NSCLC. Materials and methods: Ninety-two inoperable patients (median age: 75 years) with clinically staged, histologically proven T1 (n = 31) or T2 (n = 61), N0, M0 non-small cell lung cancer (NSCLC) were included in this study. Treatment consisted of 3–5 fractions with 7–15 Gy per fraction prescribed to the 60% isodose. Results: Freedom from local recurrence at 1, 3 and 5 years was 89%, 83% and 83%, respectively. All 10 local failures were observed in patients with T2 tumors. Isolated regional recurrence was observed in 7.6%. The crude rate of distant progression was 20.7%. Overall survival at 1, 3, and 5 years was 79%, 38% and 17% with a median survival of 29 months. Disease specific survival at 1, 3, and 5 years was 93%, 64% and 48%. Karnofsky performance status, T stage, gross tumor volume and tumor location had no significant impact on overall and disease specific survival. SBRT was generally well tolerated and all patients completed therapy as planned. Conclusion: SBRT for stage I lung cancer is very well tolerated in this patient cohort with significant cardiopulmonal comorbidity and results in excellent local control rates, although a considerable portion develops regional and distant metastases.

  17. Fuel trading

    International Nuclear Information System (INIS)

    2015-01-01

    A first part of this report proposes an overview of trends and predictions. After a synthesis on the sector changes and trends, it indicates and comments the most recent predictions for the consumption of refined oil products and for the turnover of the fuel wholesale market, reports the main highlights concerning the sector's life, and gives a dashboard of the sector activity. The second part proposes the annual report on trends and competition. It presents the main operator profiles and fuel categories, the main determining factors of the activity, the evolution of the sector context between 2005 and 2015 (consumptions, prices, temperature evolution). It analyses the evolution of the sector activity and indicators (sales, turnovers, prices, imports). Financial performances of enterprises are presented. The economic structure of the sector is described (evolution of the economic fabric, structural characteristics, French foreign trade). Actors are then presented and ranked in terms of turnover, of added value, and of result

  18. Trading stages

    DEFF Research Database (Denmark)

    Steiner, Uli; Tuljapurkar, Shripad; Coulson, Tim

    2012-01-01

    because they are hard to use and interpret, and tools for age and stage structured populations are missing. We present easily interpretable expressions for the sensitivities and elasticities of life expectancy to vital rates in age-stage models, and illustrate their application with two biological......Interest in stage-and age structured models has recently increased because they can describe quantitative traits such as size that are left out of age-only demography. Available methods for the analysis of effects of vital rates on lifespan in stage-structured models have not been widely applied...... examples. Much of our approach relies on trading of time and mortality risk in one stage for time and risk in others. Our approach contributes to the new framework of the study of age- and stage-structured biodemography....

  19. Evolução dos Setores Econômicos do Brasil em 1992, 1995, 1999 e 2000: uma análise insumo-produtoEvolutions of the Economical Sectors in Brazil in the years of 1992,1995,1999 and 2000: an input-output analysisEvolución de los Sectores Económicos de Brasil en 1992, 1995, 1999 y 2000: un análisis insumo-producto

    Directory of Open Access Journals (Sweden)

    VIEIRA, Fábio Lopes

    2005-05-01

    Full Text Available RESUMOCom base nas tabelas de insumo-produto do Brasil para 1992, 1995, 1999 e 2000, este trabalho destaca um panorama evolutivo dos setores econômicos brasileiros no período. Como corolário, o domínio das relações inter-setoriais na economia brasileira foi dos setores Metalurgia/Siderurgia e Química, corroborados pela tradição de Hirschman/Rasmussen e pelo conceito de campo de influência.ABSTRACTUsing input-output analysis this paper presents for 1992, 1995, 1999 and 2000 a comparative analysis of the Brazilian economics sections in the period. As result, it was verified that the domain of the inter-sector relationships in the Brazilian economy was of the sections Metallurgy of iron and steel and Chemistry, corroborated by the tradition of the influence field concept.RESUMENCon base en las tablas de insumo-producto de Brasil para 1992, 1995, 1999 y 2000, este trabajo destaca el panorama evolutivo de los sectores económicos brasileños en ese período. Como corolario, el dominio de las relaciones intersectoriales en la economía brasileña correspondió a los sectores Metalurgia/Siderurgia y Química, corroborados por la tradición de Hirschman/Rasmussen y por el concepto de campo de influencia.

  20. A Network of Networks Perspective on Global Trade

    Science.gov (United States)

    Maluck, Julian; Donner, Reik V.

    2015-01-01

    Mutually intertwined supply chains in contemporary economy result in a complex network of trade relationships with a highly non-trivial topology that varies with time. In order to understand the complex interrelationships among different countries and economic sectors, as well as their dynamics, a holistic view on the underlying structural properties of this network is necessary. This study employs multi-regional input-output data to decompose 186 national economies into 26 industry sectors and utilizes the approach of interdependent networks to analyze the substructure of the resulting international trade network for the years 1990–2011. The partition of the network into national economies is observed to be compatible with the notion of communities in the sense of complex network theory. By studying internal versus cross-subgraph contributions to established complex network metrics, new insights into the architecture of global trade are obtained, which allow to identify key elements of global economy. Specifically, financial services and business activities dominate domestic trade whereas electrical and machinery industries dominate foreign trade. In order to further specify each national sector’s role individually, (cross-)clustering coefficients and cross-betweenness are obtained for different pairs of subgraphs. The corresponding analysis reveals that specific industrial sectors tend to favor distinct directionality patterns and that the cross-clustering coefficient for geographically close country pairs is remarkably high, indicating that spatial factors are still of paramount importance for the organization of trade patterns in modern economy. Regarding the evolution of the trade network’s substructure, globalization is well-expressed by trends of several structural characteristics (e.g., link density and node strength) in the interacting network framework. Extreme events, such as the financial crisis 2008/2009, are manifested as anomalies superimposed

  1. A Network of Networks Perspective on Global Trade.

    Directory of Open Access Journals (Sweden)

    Julian Maluck

    Full Text Available Mutually intertwined supply chains in contemporary economy result in a complex network of trade relationships with a highly non-trivial topology that varies with time. In order to understand the complex interrelationships among different countries and economic sectors, as well as their dynamics, a holistic view on the underlying structural properties of this network is necessary. This study employs multi-regional input-output data to decompose 186 national economies into 26 industry sectors and utilizes the approach of interdependent networks to analyze the substructure of the resulting international trade network for the years 1990-2011. The partition of the network into national economies is observed to be compatible with the notion of communities in the sense of complex network theory. By studying internal versus cross-subgraph contributions to established complex network metrics, new insights into the architecture of global trade are obtained, which allow to identify key elements of global economy. Specifically, financial services and business activities dominate domestic trade whereas electrical and machinery industries dominate foreign trade. In order to further specify each national sector's role individually, (cross-clustering coefficients and cross-betweenness are obtained for different pairs of subgraphs. The corresponding analysis reveals that specific industrial sectors tend to favor distinct directionality patterns and that the cross-clustering coefficient for geographically close country pairs is remarkably high, indicating that spatial factors are still of paramount importance for the organization of trade patterns in modern economy. Regarding the evolution of the trade network's substructure, globalization is well-expressed by trends of several structural characteristics (e.g., link density and node strength in the interacting network framework. Extreme events, such as the financial crisis 2008/2009, are manifested as anomalies

  2. Europe's New Trade Agenda

    National Research Council Canada - National Science Library

    Ahearn, Raymond J

    2006-01-01

    .... Given that the EU is a global economic superpower, its resumption of a bilateral and preferential trade strategy has implications for the global trading system, as well as for U.S. trade interests...

  3. Palliative stenting for relief of dysphagia in patients with inoperable esophageal cancer: impact on quality of life.

    Science.gov (United States)

    Madhusudhan, Chinthakandhi; Saluja, Sundeep S; Pal, Sujoy; Ahuja, Vineet; Saran, Pratap; Dash, Nihar R; Sahni, Peush; Chattopadhyay, Tushar K

    2009-01-01

    The aim of palliation in patients with inoperable esophageal cancer is to relieve dysphagia with minimal morbidity and mortality, and thus improve quality of life (QOL). The use of a self-expanding metal stent (SEMS) is a well-established modality for palliation of dysphagia in such patients. We assessed the QOL after palliative stenting in patients with inoperable esophageal cancer. Thirty-three patients with dysphagia due to inoperable esophageal cancer underwent SEMS insertion between October 2004 and December 2006. All patients had grade III/IV dysphagia and locally advanced unresectable cancer (n = 13), distant metastasis (n = 14), or comorbid conditions/poor general health status precluding a major surgical procedure (n = 6). Patients with grade I/II dysphagia and those with carcinoma of the cervical esophagus were excluded. The QOL was assessed using the European Organization for Research and Treatment of Cancer (EORTC) QLQ-C30 (version 3) and EORTC QLQ-Esophagus (OES) 18 questionnaire (a QOL scale specifically designed for esophageal diseases) before and at 1, 4, and 8 weeks after placement of the stent. The mean age of the patients was 56 (range 34-78) years, and 22 were men. A covered SEMS was used in all patients. The most common site of malignancy was the lower third of the esophagus (n = 18, 55%). In 23 (77%) patients, the stent crossed the gastroesophageal junction. Seven patients required a reintervention for stent block (n = 5) and stent migration (n = 2). Dysphagia improved significantly immediately after stenting, and this improvement persisted until 8 weeks (16.5 vs. 90.6; P < 0.01). The global health status (5.8 vs. 71.7; P < 0.01) and all functional scores improved significantly after stenting from baseline until 8 weeks. Except pain (14.1 vs. 17.7; P = 0.67), there was significant improvement in deglutition (22.7 vs. 2.0; P < 0.01), eating (48 vs. 12.6; P < 0.01), and other symptom scales (19.7 vs. 12.1; P = 0.04) following stenting. The

  4. Brachytherapy Is Associated With Improved Survival in Inoperable Stage I Endometrial Adenocarcinoma: A Population-Based Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Acharya, Sahaja; Perkins, Stephanie M.; DeWees, Todd; Fischer-Valuck, Benjamin W. [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States); Mutch, David G.; Powell, Matthew A. [Department of Obstetrics and Gynecology, Washington University School of Medicine, St. Louis, Missouri (United States); Schwarz, Julie K. [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States); Grigsby, Perry W., E-mail: pgrigsby@radonc.wustl.edu [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States)

    2015-11-01

    Purpose: To assess the use of brachytherapy (BT) with or without external beam radiation (EBRT) in inoperable stage I endometrial adenocarcinoma in the United States and to determine the effect of BT on overall survival (OS) and cause-specific survival (CSS). Methods and Materials: Data between 1998 and 2011 from the National Cancer Institute's Surveillance, Epidemiology and End Results database were analyzed. Coarsened exact matching was used to adjust for differences in age and grade between patients who received BT and those who did not. Prognostic factors affecting OS and CSS were evaluated using the Kaplan-Meier product-limit method and a Cox proportional hazards regression model. Results: A total of 460 patients with inoperable stage I endometrial adenocarcinoma treated with radiation therapy were identified. Radiation consisted of either EBRT (n=260) or BT with or without EBRT (n=200). The only factor associated with BT use was younger patient age (median age, 72 vs 76 years, P=.001). Patients who received BT had a higher 3-year OS (60% vs 47%, P<.001) and CSS (82% vs 74%, P=.032) compared with those who did not. On multivariate analysis, BT use was independently associated with an improved OS (hazard ratio [HR] 0.67, 95% confidence interval [CI] 0.52-0.87) and CSS (HR 0.61, 95% CI 0.39-0.93). When patients were matched on age, BT use remained significant on multivariate analysis for OS (HR 0.65, 95% CI 0.48-0.87) and CSS (HR 0.52, 95% CI 0.31-0.84). When matched on age and grade, BT remained independently associated with improved OS and CSS (OS HR 0.62, 95% CI 0.46-0.83; CSS HR 0.57, 95% CI 0.34-0.92). Conclusion: Brachytherapy is independently associated with improved OS and CSS. It should be considered as part of the treatment regimen for stage I inoperable endometrial cancer patients undergoing radiation.

  5. Fluoroscopically-guided transnasal insertion of ileus tube intestinal decompression in patients with inoperable malignant bowel obstruction

    International Nuclear Information System (INIS)

    Fang Shiming; Li Haili; Lin Qing; Mao Aiwu; Wu Shaoqiu; Jiang Haosheng; Cao Yan; Wang Zhenlei

    2011-01-01

    Objective: To assess the technical feasibility and effectiveness of fluoroscopically-guided transnasal insertion of ileus tube for intestinal decompression in the treatment of inoperable malignant bowel obstruction. Methods: A total of 211 patients with inoperable malignant bowel obstruction were enrolled in this study. The median KPS scale was 40 (ranged from 20 to 60). Under fluoroscopic guidance, transnasal insertion of ileus tube by using conventional technique or guidewire-catheter exchange technique was performed in all patients. The technical success rate, the clinical effective rate, the curative rate and adverse reactions as well as complications were documented. The correlation among the obstructive sites, obstruction causes and therapeutic effectiveness was analyzed. The ileus tube used in this study was a four-cavity and double-balloon catheter with a diameter of 16 F/18 f, which is produced by Cliny Company. Results: Transnasal drainage tube was successfully inserted into the proximal jejunum in all 211 patients with malignant bowel obstruction, and the total technical success rate was 100%. The initial technical success rate of the traditional technique and the catheter-guidewire exchange method was 85.5% (65/76) and 100% (135/135) respectively, the difference between the two was significant (P<0.05). After 24 hours, the clinical remission rate in the patients with high-level intestinal obstruction, lower-level intestinal obstruction and colorectal obstruction was 95.8% (46/48), 92.9% (117/126) and 83.8% (31/37), respectively. A follow-up of 4-245 days (mean 138 days) was conducted, and the total clinical cure rate was 27.5% (58/211). The clinical cure rate in small intestine obstruction and colorectal obstruction caused by primary tumor or recurrence was 12.7% (20/157) and 59.5% (22/37), respectively (P<0.05). The adverse reactions and complications included uncomfortable pharynx feeling or pain (99.1%, 199/221), the tube obstruction (23.2%, 49

  6. Brachytherapy Is Associated With Improved Survival in Inoperable Stage I Endometrial Adenocarcinoma: A Population-Based Analysis

    International Nuclear Information System (INIS)

    Acharya, Sahaja; Perkins, Stephanie M.; DeWees, Todd; Fischer-Valuck, Benjamin W.; Mutch, David G.; Powell, Matthew A.; Schwarz, Julie K.; Grigsby, Perry W.

    2015-01-01

    Purpose: To assess the use of brachytherapy (BT) with or without external beam radiation (EBRT) in inoperable stage I endometrial adenocarcinoma in the United States and to determine the effect of BT on overall survival (OS) and cause-specific survival (CSS). Methods and Materials: Data between 1998 and 2011 from the National Cancer Institute's Surveillance, Epidemiology and End Results database were analyzed. Coarsened exact matching was used to adjust for differences in age and grade between patients who received BT and those who did not. Prognostic factors affecting OS and CSS were evaluated using the Kaplan-Meier product-limit method and a Cox proportional hazards regression model. Results: A total of 460 patients with inoperable stage I endometrial adenocarcinoma treated with radiation therapy were identified. Radiation consisted of either EBRT (n=260) or BT with or without EBRT (n=200). The only factor associated with BT use was younger patient age (median age, 72 vs 76 years, P=.001). Patients who received BT had a higher 3-year OS (60% vs 47%, P<.001) and CSS (82% vs 74%, P=.032) compared with those who did not. On multivariate analysis, BT use was independently associated with an improved OS (hazard ratio [HR] 0.67, 95% confidence interval [CI] 0.52-0.87) and CSS (HR 0.61, 95% CI 0.39-0.93). When patients were matched on age, BT use remained significant on multivariate analysis for OS (HR 0.65, 95% CI 0.48-0.87) and CSS (HR 0.52, 95% CI 0.31-0.84). When matched on age and grade, BT remained independently associated with improved OS and CSS (OS HR 0.62, 95% CI 0.46-0.83; CSS HR 0.57, 95% CI 0.34-0.92). Conclusion: Brachytherapy is independently associated with improved OS and CSS. It should be considered as part of the treatment regimen for stage I inoperable endometrial cancer patients undergoing radiation.

  7. Distribution of lymph node metastases on FDG-PET/CT in inoperable or unresectable oesophageal cancer patients and the impact on target volume definition in radiation therapy

    NARCIS (Netherlands)

    Machiels, Melanie; Wouterse, Sanne J.; Geijsen, Elisabeth D.; van Os, Rob M.; Bennink, Roel J.; van Laarhoven, Hanneke Wm; Hulshof, Maarten Ccm

    2016-01-01

    Definitive chemoradiotherapy (dCRT) is standard care for localised inoperable/unresectable oesophageal tumours. Many surgical series have reported on distribution of lymph node metastases (LNM) in resected patients. However, no data is available on the distribution of at-risk LN regions in this more

  8. Medically inoperable endometrial cancer in patients with a high body mass index (BMI): Patterns of failure after 3-D image-based high dose rate (HDR) brachytherapy

    DEFF Research Database (Denmark)

    Acharya, Sahaja; Esthappan, Jacqueline; Badiyan, Shahed

    2016-01-01

    the patterns of failure after definitive treatment with 3-D image-based high dose rate (HDR) brachytherapy for medically inoperable endometrial cancer. MATERIALS AND METHODS: Forty-three consecutive patients with endometrial cancer FIGO stages I-III were treated definitively with HDR brachytherapy...

  9. Radiotherapy and cis-diammine dichloroplatinum (II) as a combined treatment modality for inoperable non-small cell lung cancer: a dose finding study

    NARCIS (Netherlands)

    Schaake-Koning, C.; Bartelink, H.; Adema, B. H.; Schuster-Uitterhoeve, L.; van Zandwijk, N.

    1986-01-01

    A dose finding study was carried out to establish the dose of cis-diammine dichloroplatinum (II), cDDP, that can be combined with high dose radiotherapy routinely in patients with inoperable non-small cell lung cancer. The patients were irradiated over a period of 2 weeks, 5 fractions a week,

  10. Advanced inoperable type B3 thymoma: monitoring of a novel therapeutic approach with radio-chemotherapy and sorafenib by FDG-PET and CT

    Energy Technology Data Exchange (ETDEWEB)

    Winder, T.; Gasser, K. [Dept. of Medicine, Academic Teaching Hospital Feldkirch (Austria); Vorarlberg Inst. for Vascular Investigation and Treatment (VIVIT), Feldkirch (Austria); Pvt. Univ. in the Principality of Liechtenstein (Liechtenstein); Schuster, A. [Dept. of Radiology, Academic Techning Hospital Feldkirch (Austria); Becherer, A. [Dept. of Nuclear Medicine, Academic Teaching Hospital Feldkirch (Austria); Vries, A. de [Dept. of Radiotherapy, Academic Teaching Hospital Feldkirch (Austria); Gruber-Moesenbacher, U. [Dept. of Pathology, Academic Teaching Hospital Feldkirch (Austria); Muendlein, A. [Vorarlberg Inst. for Vascular Investigation and Treatment (VIVIT), Feldkirch (Austria); Pvt. Univ. in the Principality of Liechtenstein (Liechtenstein); Drexel, H. [Dept. of Medicine, Academic Teaching Hospital Feldkirch (Austria); Vorarlberg Inst. for Vascular Investigation and Treatment (VIVIT), Feldkirch (Austria); Pvt. Univ. in the Principality of Liechtenstein (Liechtenstein); Drexel Univ. Coll. of Medicine, Philadelphia, PA (United States); Lang, A. [Dept. of Medicine, Academic Teaching Hospital Feldkirch (Austria); Vorarlberg Inst. for Vascular Investigation and Treatment (VIVIT), Feldkirch (Austria)

    2010-07-01

    This report highlights the benefit of radio-chemotherapy followed by sorafenib in a 55 years old woman, diagnosed with an inoperable type B3 thymoma and illustrates the potential usefulness of {sup 18}F-FDG in monitoring treatment with sorafenib. (orig.)

  11. A Phase 1 Trial of an Immune Checkpoint Inhibitor plus Stereotactic Ablative Radiotherapy in Patients with Inoperable Stage I Non-Small Cell Lung Cancer

    Science.gov (United States)

    2017-10-01

    with inoperable disease for fear of side effects . As a result, 30% of such patients will die from metastases within 3 years. A new class of drugs...studies with an 18F-peptide and perform PET imaging. Role: Co-Investigator Megan Daly 2R44CA192498-02 (Partain PI) 05/01/16-04/30

  12. Advanced inoperable type B3 thymoma: monitoring of a novel therapeutic approach with radio-chemotherapy and sorafenib by FDG-PET and CT

    International Nuclear Information System (INIS)

    Winder, T.; Gasser, K.; Schuster, A.; Becherer, A.; Vries, A. de; Gruber-Moesenbacher, U.; Muendlein, A.; Drexel, H.; Lang, A.

    2010-01-01

    This report highlights the benefit of radio-chemotherapy followed by sorafenib in a 55 years old woman, diagnosed with an inoperable type B3 thymoma and illustrates the potential usefulness of 18 F-FDG in monitoring treatment with sorafenib. (orig.)

  13. China's foreign trade and climate change. A case study of CO{sub 2} emissions

    Energy Technology Data Exchange (ETDEWEB)

    Yunfeng, Yan [Business School, East China Normal University, 500 Dongchuan Rd., Shanghai 200241 (China); Laike, Yang [Center of International Finance and Risk Management, East China Normal University, 500 Dongchuan Rd., Shanghai 200241 (China)

    2010-01-15

    The globalization of trade has numerous environmental implications. Trade creates a mechanism for consumers to shift environmental pollution associated with their consumption to other countries. Carbon leakage exerts great influences on international trade and economy. Applying an input-output approach, the paper estimates the amount of carbon dioxide (CO{sub 2}) embodied in China's foreign trade during 1997-2007. It is found that 10.03-26.54% of China's annual CO{sub 2} emissions are produced during the manufacture of export goods destined for foreign consumers, while the CO{sub 2} emissions embodied in China's imports accounted for only 4.40% (1997) and 9.05% (2007) of that. We also estimate that the rest of world avoided emitting 150.18 Mt CO{sub 2} in 1997, increasing to 593 Mt in 2007, as a result of importing goods from China, rather than manufacturing the same type and quantity of goods domestically. During 1997-2007, the net 'additional' global CO{sub 2} emissions resulting from China's exports were 4894 Mt. Then, the paper divides the trade-embodied emissions into scale, composition and technical effect. It was found that scale and composition effect increased the CO{sub 2} emissions embodied in trade while the technical effect offset a small part of them. Finally, its mechanism and policy implications are presented. (author)

  14. China's foreign trade and climate change: A case study of CO{sub 2} emissions

    Energy Technology Data Exchange (ETDEWEB)

    Yan Yunfeng, E-mail: yyf007@126.co [Business School, East China Normal University, 500 Dongchuan Rd., Shanghai 200241 (China); Yang Laike, E-mail: lkyang@bs.ecnu.edu.c [Center of International Finance and Risk Management, East China Normal University, 500 Dongchuan Rd., Shanghai 200241 (China)

    2010-01-15

    The globalization of trade has numerous environmental implications. Trade creates a mechanism for consumers to shift environmental pollution associated with their consumption to other countries. Carbon leakage exerts great influences on international trade and economy. Applying an input-output approach, the paper estimates the amount of carbon dioxide (CO{sub 2}) embodied in China's foreign trade during 1997-2007. It is found that 10.03-26.54% of China's annual CO{sub 2} emissions are produced during the manufacture of export goods destined for foreign consumers, while the CO{sub 2} emissions embodied in China's imports accounted for only 4.40% (1997) and 9.05% (2007) of that. We also estimate that the rest of world avoided emitting 150.18 Mt CO{sub 2} in 1997, increasing to 593 Mt in 2007, as a result of importing goods from China, rather than manufacturing the same type and quantity of goods domestically. During 1997-2007, the net 'additional' global CO{sub 2} emissions resulting from China's exports were 4894 Mt. Then, the paper divides the trade-embodied emissions into scale, composition and technical effect. It was found that scale and composition effect increased the CO{sub 2} emissions embodied in trade while the technical effect offset a small part of them. Finally, its mechanism and policy implications are presented.

  15. A Case of Inoperable Malignant Insulinoma with Resistant Hypoglycemia Who Experienced the Most Significant Clinical Improvement with Everolimus

    Directory of Open Access Journals (Sweden)

    Emre Bozkirli

    2013-01-01

    Full Text Available Metastatic insulinomas may sometimes present with recurrent life-threatening hypoglycemia episodes. Such patients usually fail to respond to various therapeutic agents which causes constant dextrose infusion requirement. Herein, we present a resistant case of inoperable malignant insulinoma who was treated with many therapeutic agents and interventions including somatostatin analogues, Yttrium-90 radioembolization, everolimus, radiotherapy, and chemoembolization. Close blood sugar monitorization during these therapies showed the most favourable response with everolimus. Everolimus treatment resulted in rapid improvement of hypoglycemia episodes, letting us discontinue dextrose infusion and discharge the patient. However, experience with everolimus in such patients is still limited, and more precise data can be obtained with the increasing use of this agent for neuroendocrine tumours.

  16. Combined endoscopic treatment in the patient with inoperable middle third esophageal cancer (4-year clinical follow-up

    Directory of Open Access Journals (Sweden)

    E. V. Filonenko

    2015-01-01

    Full Text Available The results of 4-year clinical follow-up in the patient with obstructive inoperable retropericardial esophageal cancer are represented. According to cardiac co-morbidity (myocardial infarction, postinfarction cardiosclerosis the palliative care for patient was managed. To preserve patency of esophagus multiple courses of endoscopic photodynamic therapy by means of the approach developed in P.A. Herzen MCRI were performed. From 2011 to 2014 thirteen courses of photodynamic therapy with photosens were conducted. The patient was under follow-up for 4 years and 3 months to his death in 2015. For follow-up period the patient had oral feeding with no signs of dysphagia, not significant weight loss and with good quality of life. 

  17. A tailored, supportive care intervention using systematic assessment designed for people with inoperable lung cancer: a randomised controlled trial.

    Science.gov (United States)

    Schofield, Penelope; Ugalde, Anna; Gough, Karla; Reece, John; Krishnasamy, Meinir; Carey, Mariko; Ball, David; Aranda, Sanchia

    2013-11-01

    People with inoperable lung cancer experience higher levels of distress, more unmet needs and symptoms than other cancer patients. There is an urgent need to test innovative approaches to improve psychosocial and symptom outcomes in this group. This study tested the hypothesis that a tailored, multidisciplinary supportive care programme based on systematic needs assessment would reduce perceived unmet needs and distress and improve quality of life. A randomised controlled trial design was used. The tailored intervention comprised two sessions at treatment commencement and completion. Sessions included a self-completed needs assessment, active listening, self-care education and communication of unmet psychosocial and symptom needs to the multidisciplinary team for management and referral. Outcomes were assessed with the Needs Assessment for Advanced Lung Cancer Patients, Hospital Anxiety and Depression Scale, Distress Thermometer and European Organization of Research and Treatment of Cancer Quality of Life Q-C30 V2.0. One hundred and eight patients with a diagnosis of inoperable lung or pleural cancer (including mesothelioma) were recruited from a specialist facility before the trial closed prematurely (original target 200). None of the primary contrasts of interest were significant (all p > 0.10), although change score analysis indicated a relative benefit from the intervention for unmet symptom needs at 8 and 12 weeks post-assessment (effect size = 0.55 and 0.40, respectively). Although a novel approach, the hypothesis that the intervention would benefit perceived unmet needs, psychological morbidity, distress and health-related quality of life was not supported overall. Copyright © 2013 John Wiley & Sons, Ltd.

  18. Regional radiotherapy (RT), hyperthermia (HT) and chemotherapy in primary inoperable or recurrent rectal carcinoma: feasibility and operability

    International Nuclear Information System (INIS)

    Schem, B.C.; Froystein, T.; Sorbye, H.; Dahl, O.; Mella, O.

    2005-01-01

    Full text: Patients with primarily inoperable rectal carcinomas without distant metastases, and some with local recurrence, are surgically curable if tumor shrinkage after preoperative treatment is achieved. The effect of preoperative RT alone or combined with chemotherapy is not satisfactory in many patients. In a previous pilot study, excellent local control was achieved with radiotherapy, oxaliplatin, continuous 5FU, and weekly hyperthermia before surgery. However, acute toxicity, mainly diarrhoea, was a problem, and the continuous administration of 5FU via a central venous line was cumbersome in an outpatient setting. In the present study 5FU was replaced with oral capecitabine, all the radiotherapy was customized by conformal techniques, and the radiotherapy dose was moderately reduced. Patients were included from August -03. Based on clinical and MR evaluation, all were considered inoperable or with high risk of pelvic failure after surgery alone. 23 patients (M15, F8) have completed preoperative treatment. Their stage were T4 (8), T3 (9) and local pelvic recurrence, all without distant metastases. Mean age was 58 years (range 21 - 74). The treatment schedule was: RT (2 Gy x 23 to primary tumor, mesorectum and regional nodes with margins, attempting to minimize dose to the ileum, and 2 Gy x 4-5 boost to the tumor, average total tumor dose 54.3 Gy), weekly HT just after RT, weekly oxaliplatin (50 mg/m 2 simultaneous with HT), and capecitabine (825 mg/m 2 ) the evening and morning before each RT fraction. Hyperthermia was given with BSD 2000 (Sigma-60 or Sigma Eye applicator) and use of invasive thermometry with Bowman probes. Therapeutic time was 60 min. at tolerable output. Trimodality treatment with conformal RT, HT, oxaliplatin and capecitabine is tolerable. In the present setting, the toxicity is less pronounced than in the first pilot study, and the treatment is easier in an outpatient setting. (author)

  19. Computed tomography to assess pulmonary injury associated with concurrent chemo-radiotherapy for inoperable non-small cell lung cancer

    Energy Technology Data Exchange (ETDEWEB)

    Aviram, G. [London Health Sciences Centre, Dept. of Radiology, London, Ontario (Canada); Yu, E.; Tai, P. [Univ. of Western Ontario, Dept. of Radiation Oncology, London Regional Cancer Centre, London, Ontario (Canada); Lefcoe, M.S. [London Health Sciences Centre, Dept. of Radiology, London, Ontario (Canada)

    2001-12-01

    To characterize serial computed tomography (CT) findings of pulmonary injury after a uniform regimen of concurrent chemo-radiotherapy in inoperable non-small cell lung cancer, and to compare the radiation-induced lung toxicity with other concurrent chemo-radiation regimens. Twenty-four patients with advanced non-small cell lung cancer received 2 induction cycles of cisplatin and vinblastine, followed by 2 further cycles of cisplatin and vinblastine, concurrent with 60 Gy radiation at 2 Gy per fraction. Radiation-induced lung injury in the acute and chronic phases was assessed by serial CT scans and compared with preradiation baseline scans. Acute radiation pneumonitis was evaluated using the Common Toxicity Criteria, and chronic radiation fibrosis was graded according to the European Organisation for Research and Treatment of Cancer - Radiation Therapy Oncology Group Scale. Seventeen (81%) patients had characteristic CT findings of radiation induced pulmonary damage, which were confined to the radiation ports. Although patchy nonhomogeneous and air-space opacities characterized acute radiation pneumonitis, and homogeneous opacities with loss of volume were typical for chronic fibrosis, ground-glass opacities were found frequently in both phases. Acute radiation pneumonitis grade 1 was seen in 29% and grade 2 in 9.5%. Chronic radiation fibrosis grades 1, 2 and 3 were found in 14%, 33% and 19% of the patients respectively. Median survival time was 13 months. CT enables detailed evaluation of radiation-induced pulmonary injury after concurrent chemo-radiation for inoperable non-small cell lung cancer. Although survival time with the present regimen is comparable to other concurrent chemo-radiation regimens, a high incidence of radiation injury was found, though the severity was not life threatening. (author)

  20. Absence of toxicity with hypofractionated 3-dimensional radiation therapy for inoperable, early stage non-small cell lung cancer

    Directory of Open Access Journals (Sweden)

    Vuong Te

    2006-11-01

    Full Text Available Abstract Purpose Hypofractionated radiotherapy may overcome repopulation in rapidly proliferating tumors such as lung cancer. It is more convenient for the patients and reduces health care costs. This study reports our results on patients with medically inoperable, early stage, non-small cell lung cancer (NSCLC treated with hypofractionation. Materials and methods Stage T1-2N0 NSCLC patients were treated with hypofractionation alone, 52.5 Gy/15 fractions, in 3 weeks, with 3-dimensional conformal planning. T1-2N1 patients with the hilar lymphnode close to the primary tumor were also eligible for this treatment. We did not use any approach to reduce respiratory motion, but it was monitored in all patients. Elective nodal radiotherapy was not performed. Routine follow up included assessment for acute and late toxicity and radiological tumor response. Median follow up time was 29 months for the surviving patients. Results Thirty-two patients with a median age of 76 years, T1 = 15 and T2 = 17, were treated. Median planning target volume (PTV volume was 150cc and median V16 of both lungs was 13%. The most important finding of this study is that toxicity was minimal. Two patients had grade ≤ 2 acute pneumonitis and 3 had mild (grade 1 acute esophagitis. There was no late toxicity. Actuarial 1 and 2-year overall survival rates are 78% and 56%, cancer specific survival rates (CSS are 90% and 74%, and local relapse free survival rates are 93% and 76% respectively. Conclusion 3-D planning, involved field hypofractionation at a dose of 52.5 Gy in 15 daily fractions is safe, well tolerated and easy radiation treatment for medically inoperable lung cancer patients. It shortens by half the traditional treatment. Results compare favorably with previously published studies. Further studies are needed to compare similar technique with other treatments such as surgery and stereotactic radiotherapy.

  1. Radiotherapy in medically inoperable early stage non-small cell lung cancer

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo Kyoung; Park, Charn II [College of Medicine, Seoul National Univ., Seoul (Korea, Republic of)

    2000-12-01

    For early stage non-small-cell lung cancer, surgical resection is the treatment of choice. But when the patients are not able to tolerate it because of medical problem and when refuse surgery, radiation therapy is considered an acceptable alternative. We report on the treatment results and the effect of achieving local control of primary tumors on survival end points and analyze factors that may influence survival and local control. We reviewed the medical records of 32 patients with medically inoperable non--small cell lung cancer treated at our institution from June, 1987 through June, 1997. All patients had a pathologic diagnosis of non-small cell lung cancer and were not. candidate for surgical resection because of either patients refusal (4), old age (2), lung problem (21), chest wall invasion (3) and heart problems (3). In 8 patients, there were more than 2 problems. The median age of the patients was 68 years (ranging from 60 to 86 years). Histologic cell type included squamous (24), adenocarcinoma (6) and unclassified squamous cell (2). The clinical stages of the patients were T1 in 5. T2 in 25, T3 in 2 patients. Initial tumor size was {<=}3.0 cm in 11, between 3.0 cm and 5.0 cm in 13 and more than 5.0 em in 8 patients. All patients had taken chest x-rays, chest CT, abdomen USG and bone scan. Radiotherapy was delivered using 6 MV or 10 MV linear accelerators. The doses of primary tumor were the ranging from 54.0 Gy to 68.8 Gy (median; 61.2 Gy). The duration of treatment was from 37 days through 64 days (median; 48.5 days) and there was no treatment interruption except 1 patient due to poor general status. In 12 patients, concomitant boost technique was used. There were no neoadjuvant or adjuvant treatments such as surgery or chemotherapy. The period of follow-up was ranging from 2 months through 93 months (median; 23 months). Survival was measured from the date radiation therapy was initiated. The overall survival rate was 44.6% at 2 years and 24.5% at 5

  2. International Trade and Protectionism.

    Science.gov (United States)

    Stanford Univ., CA. Stanford Program on International and Cross Cultural Education.

    This unit is designed to investigate the reasons for international trade and the issue of trade protectionism by focusing on the case study of the U.S. trade relationship with Taiwan. The unit begins with a simulation that highlights the concepts of global interdependence, the need for international trade, and the distribution of the world's…

  3. Trade Facilitation in Ethiopia:

    African Journals Online (AJOL)

    Tilahun_EK

    (UNCTAD), “Trade and transport facilitation … addresses a wide agenda in economic development and trade that may include improving transport infrastructure and services, reducing customs tariffs, and removing non-tariff trade barriers including administrative and regulatory barriers.”24. The definition of trade facilitation ...

  4. Free trade or just trade? The World Trade Organisation, human ...

    African Journals Online (AJOL)

    The author assesses these claims from a human rights perspective and explores the relationship between trade, human rights and development. The article sketches the history and functions of the WTO, discusses the linkages between trade liberalisation, human rights and development, and assesses the human rights ...

  5. Impact of inter-sectoral trade on national and global CO2 emissions: An empirical analysis of China and US

    International Nuclear Information System (INIS)

    Guo Jie; Zou Lele; Wei Yiming

    2010-01-01

    This paper attempts to discuss the CO 2 emissions embodied in Sino-US international trade using a sector approach. Based on an input-output model established in this study, we quantify the impact of Sino-US international trade on national and global CO 2 emissions. Our initial findings reveal that: In 2005, the US reduced 190.13 Mt CO 2 emissions through the consumption of imported goods from China, while increasing global CO 2 emissions by about 515.25 Mt. Similarly, China reduced 178.62 Mt CO 2 emissions through the consumption of US goods, while reducing global CO 2 emissions by 129.93 Mt. Sino-US international trade increased global CO 2 emissions by 385.32 Mt as a whole, of which the Chemical, Fabricated Metal Products, Non-metallic Mineral Products and Transportation Equipment sectors contributed an 86.71% share. Therefore, we suggest that accelerating the adjustment of China's trade structure and export of US advanced technologies and experience related to clean production and energy efficiency to China as the way to reduce the negative impact of Sino-US trade on national and global CO 2 emissions. This behavior should take into account the processing and manufacturing industries as a priority, especially the Chemical, Fabricated Metal Products, Non-metallic Mineral Products and Transportation Equipment sectors.

  6. Evaluating carbon dioxide emissions in international trade of China

    International Nuclear Information System (INIS)

    Lin Boqiang; Sun Chuanwang

    2010-01-01

    China is the world's largest emitter of carbon dioxide (CO 2 ). As exports account for about one-third of China's GDP, the CO 2 emissions are related to not only China's own consumption but also external demand. Using the input-output analysis (IOA), we analyze the embodied CO 2 emissions of China's import and export. Our results show that about 3357 million tons CO 2 emissions were embodied in the exports and the emissions avoided by imports (EAI) were 2333 million tons in 2005. The average contribution to embodied emission factors by electricity generation was over 35%. And that by cement production was about 20%. It implies that the production-based emissions of China are more than the consumption-based emissions, which is evidence that carbon leakage occurs under the current climate policies and international trade rules. In addition to the call for a new global framework to allocate emission responsibilities, China should make great efforts to improve its energy efficiency, carry out electricity pricing reforms and increase renewable energy. In particular, to use advanced technology in cement production will be helpful to China's CO 2 abatement.

  7. Trade Finance during the Great Trade Collapse

    OpenAIRE

    Chauffour, Jean-Pierre; Malouche, Mariem

    2011-01-01

    The bursting of the subprime mortgage market in the United States in 2008 and the ensuing global financial crisis were associated with a rapid decline in global trade. The extent of the trade collapse was unprecedented: trade flows fell at a faster rate than had been observed even in the early years of the great depression. G-20 leaders held their first crisis-related summit in November 20...

  8. Trade, development and sustainability

    DEFF Research Database (Denmark)

    Røpke, Inge

    1994-01-01

    Mainstream economic theory argues that trade, and especially free trade, is beneficial to everyone involved. This fundamental idea ? which has the character of a dogma ? still plays an important role in international discussions on trade issues, notably in relation to development and environment....... The purpose of this article is to critically assess the "free trade dogma" and to investigate the validity of widely used arguments concerning the relations between trade and development and between trade and environment. It is argued that the trading system is not something inherently good, which should...... be defended in all cases. Especially, the developing countries' benefits from trade have been very dubious. Furthermore, the trading system has contributed to environmental problems in several ways, e.g. generating undervaluation of natural resources, stimulating economic growth with environmental...

  9. Older patients with inoperable non-small cell lung cancer. Long-term survival after concurrent chemoradiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Semrau, Sabine; Fietkau, Rainer [Friedrich-Alexander-University Erlangen-Nuernberg, Department of Radiation Oncology, Erlangen (Germany); Zettl, Heike [Rostock Cancer Registry University of Rostock, Rostock (Germany); Hildebrandt, Guido [University of Rostock, Department of Radiation Therapy, Rostock (Germany); Klautke, Gunther [Klinikum Chemnitz, Department of Radiation Therapy, Chemnitz (Germany)

    2014-12-15

    Considering the various comorbidities associated with aging, the feasibility and usefulness of concurrent chemoradiotherapy (CRT) in older patients with inoperable non-small cell lung cancer (NSCLC) is a controversial issue. Here, we compared the feasibility of CRT and the effects of various comorbidities on the prognosis of a minimally selected population of inoperable NSCLC patients aged 60-77 years. The study comprised 161 patients with inoperable NSCLC who received CRT with a target radiation dose greater than 60 Gy and platinum-based chemotherapy from 1998 to 2007. The total population included 69 patients aged 60-69 years and 53 aged 70-77 years. These two age cohorts were included in the study with a follow-up of a median 14.5 months. The two groups showed no differences in long-term survival, as reflected by the 5-year survival rates of 13.0 ± 4.1 % (60- to 69-year-olds) and 14.4 ± 4.9 % (70- to 77-year-olds). During the treatment phase, the groups were comparable in terms of toxicity and the feasibility of chemotherapy. Compared to patients in their 60s, the septuagenarians had more pulmonary comorbidities (p = 0.02), diabetes mellitus (p = 0.04), cardiac comorbidities (p = 0.08), and previous cancer disease (p = 0.08) that exerted a negative effect on survival. In patients without comorbidities, there were no differences between the age groups. Age is not a contraindication for concurrent CRT per se, because elderly patients do not have a worse long-term prognosis than younger seniors. However, ''elderly patients'' (≥ 70-77 years) have more concomitant diseases associated with shorter survival than ''moderately aged patients'' (≥ 60-69 years). (orig.) [German] Hinsichtlich der verschiedenen altersbedingten Komorbiditaeten werden die Durchfuehrbarkeit und der Nutzen einer simultanen Chemoradiotherapie (''concurrent chemoradiotherapy'', CRT) bei alten Patienten mit einem inoperablen nicht

  10. Analyses of CO2 emissions embodied in Japan-China trade

    International Nuclear Information System (INIS)

    Liu Xianbing; Ishikawa, Masanobu; Wang Can; Dong Yanli; Liu Wenling

    2010-01-01

    This paper examines CO 2 emissions embodied in Japan-China trade. Besides directly quantifying the flow of CO 2 emissions between the two countries by using a traditional input-output (IO) model, this study also estimates the effect of bilateral trade to CO 2 emissions by scenario analysis. The time series of quantifications indicate that CO 2 emissions embodied in exported goods from Japan to China increased overall from 1990 to 2000. The exported CO 2 emissions from China to Japan greatly increased in the first half of the 1990s. However, by 2000, the amount of emissions had reduced from 1995 levels. Regardless, there was a net export of CO 2 emissions from China to Japan during 1990-2000. The scenario comparison shows that the bilateral trade has helped the reduction of CO 2 emissions. On average, the Chinese economy was confirmed to be much more carbon-intensive than Japan. The regression analysis shows a significant but not perfect correlation between the carbon intensities at the sector level of the two countries. In terms of CO 2 emission reduction opportunities, most sectors of Chinese industry could benefit from learning Japanese technologies that produce lower carbon intensities.

  11. Analyses of impacts of China's international trade on its water resources and uses

    Directory of Open Access Journals (Sweden)

    Z. Y. Zhang

    2011-09-01

    Full Text Available This study provides an insight into the impact of China's international trade of goods and services on its water resources and uses. Virtual water flows associated with China's international trade are quantified in an input-output framework. The analysis is scaled down to the sectoral and provincial levels to trace the origins and destinations of virtual water flows associated with the international trade. The results show that China is a net virtual water exporter of 4.8 × 1010 m3 yr−1, accounting for 2.1% of its renewable water resources and 8.6% of the total water use. Water scarce regions tend to have higher percentages of virtual water export relative to their water resources and water uses. In the water scarce Huang-Huai-Hai region, the net virtual water export accounts for 8.0% of the region's water resources and 11.3% of its water uses. For individual sectors, major net virtual water exporters are those where agriculture provides raw materials in the initial process of the production chain. The results suggest that China's economic gains from being a world "manufacture factory" have come at a high cost to its water resources.

  12. Reconfiguring trade mark law

    DEFF Research Database (Denmark)

    Elsmore, Matthew James

    2013-01-01

    -border setting, with a particular focus on small business and consumers. The article's overall message is to call for a rethink of received wisdom suggesting that trade marks are effective trade-enabling devices. The case is made for reassessing how we think about European trade mark law.......First, this article argues that trade mark law should be approached in a supplementary way, called reconfiguration. Second, the article investigates such a reconfiguration of trade mark law by exploring the interplay of trade marks and service transactions in the Single Market, in the cross...

  13. Decline in CA19-9 during chemotherapy predicts survival in four independent cohorts of patients with inoperable bile duct cancer

    DEFF Research Database (Denmark)

    Grunnet, Mie; Christensen, Ib J; Lassen, Ulrik

    2015-01-01

    BACKGROUND: Carbohydrate associated antigen (CA19-9) has been approved by the FDA as a biomarker for monitoring treatment effect in pancreatic cancer. However, the value of serum CA19-9 as a biomarker of response to chemotherapy in bile duct cancer is unclear. The aim of this study was to determine...... if a decline in CA19-9 (CA19-9 response) during chemotherapy is predictive of survival in patients with inoperable bile duct cancer. METHODS: Consecutive patients with inoperable bile duct cancer treated at a University Hospital were retrospectively included in an investigational cohort (n = 212). Three...... validation cohorts were established including patients 1) participating in phase I/II trials at a Danish Hospital (n = 71), 2) identified retrospectively in a Canadian cohort (n = 196) and 3) randomized in the ABC-02 trial (n = 410). Patients with a baseline CA19-9 and at least one CA19-9 value measured 10...

  14. Definitive radiation therapy for medically inoperable patients with stage I and II non-small cell lung cancer

    International Nuclear Information System (INIS)

    Hayakawa, K.; Mitsuhashi, N.; Saito, Y.; Nakayama, Y.; Katano, S.; Furuta, M.; Sakurai, H.; Takahashi, T.; Niibe, H.

    1995-01-01

    Purpose: To evaluate the role of definitive radiation therapy (RT) in the treatment for medically inoperable patients with stage I-II non-small cell lung cancer (NSCLC). Materials and Methods: From 1976 through 1989, 84 patients with clinical stage I and II NSCLC were treated with definitive RT alone at Gunma University hospital. All patients were treated with 10 MV X-rays using antero-posterior parallel opposed fields. The total dose ranged from 60 Gy to 90 Gy (35 pts; 60-69 Gy, 39 pts; 70-74 Gy, 10 pts; ≥ 80 Gy) with once-daily standard fractionation. Results: The two and five-year survival rates were 74% and 31% for 28 patients with stage I disease, as compared with 40% and 19% for 56 patients with stage II respectively (p<0.05). Although there was no significant difference of survival rates by the histologic subtypes, in the patients with squamous cell carcinoma there were more long-term survivors. Fifty-three patients with tumors less than 5 cm in diameter had an infield progression rate of 14% at two years, in comparison with 38% of 31 patients with tumors greater than 5 cm (p<0.05). Overall distant failure occurred in 57% of the patients with smaller tumors and in 80% of the patients with larger tumors (p<0.05). The difference of survival rates for these two groups was statistically significant (p<0.005). Ten patients given a total dose of 80Gy or over had only 17% local progression at the time of last follow-up, however they had not been alive beyond three years because they developed pulmonary insufficiency due to severe stenosis of the proximal bronchus. For age and sex, there were no significant differences in survival, however, patients with performance status of 0-1 lived longer than those with a status of 2 or more (MST 24 versus 13 months; p=0.06). Conclusion: The tumor size was the most important factor not only for local control but also for distant failure. It was also suggested that the optimal radiation dose for medically inoperable stage I

  15. Survival and Quality of Life After Stereotactic or 3D-Conformal Radiotherapy for Inoperable Early-Stage Lung Cancer

    International Nuclear Information System (INIS)

    Widder, Joachim; Postmus, Douwe; Ubbels, Jan F.; Wiegman, Erwin M.; Langendijk, Johannes A.

    2011-01-01

    Purpose: To investigate survival and local recurrence after stereotactic ablative radiotherapy (SABR) or three-dimensional conformal radiotherapy (3D-CRT) administered for early-stage primary lung cancer and to investigate longitudinal changes of health-related quality of life (HRQOL) parameters after either treatment. Methods and Materials: Two prospective cohorts of inoperable patients with T1-2N0M0 primary lung tumors were analyzed. Patients received 70 Gy in 35 fractions with 3D-CRT or 60 Gy in three to eight fractions with SABR. Global quality of life (GQOL), physical functioning (PF), and patient-rated dyspnea were assessed using the respective dimensions of European Organization for Research and Treatment of Cancer Core Questionnaire-C30 and LC13. HRQOL was analyzed using multivariate linear mixed-effects modeling, survival and local control (LC) using the Kaplan-Meier method, Cox proportional hazards analysis, and Fine and Gray multivariate competing risk analysis as appropriate. Results: Overall survival (OS) was better after SABR compared with 3D-CRT with a HR of 2.6 (95% confidence interval [CI]: 1.5–4.8; p < 0.01). 3D-CRT conferred a subhazard ratio for LC of 5.0 (95% CI: 1.7–14.7; p < 0.01) compared with SABR. GQOL and PF were stable after SABR (p = 0.21 and p = 0.62, respectively). Dyspnea increased after SABR by 3.2 out of 100 points (95% CI: 1.0–5.3; p < 0.01), which is clinically insignificant. At 1 year, PF decreased by an excess of 8.7 out of 100 points (95% CI: 2.8–14.7; p < 0.01) after 3D-CRT compared with SABR. Conclusion: In this nonrandomized comparison of two prospective cohorts of medically inoperable patients with Stage I lung cancer, OS and LC were better after SABR. GQOL, PF, and patient-rated dyspnea were stable after SABR, whereas PF decreased after 3D-CRT approaching clinical significance already at 1 year.

  16. Robotic stereotactic body radiation therapy for elderly medically inoperable early-stage non-small cell lung cancer

    Directory of Open Access Journals (Sweden)

    Karam SD

    2013-08-01

    Full Text Available Sana D Karam,1 Zachary D Horne,1 Robert L Hong,1,2 Nimrah Baig,1 Gregory J Gagnon,4 Don McRae,2 David Duhamel,3 Nadim M Nasr1,21Department of Radiation Oncology, Georgetown University Hospital, Washington, DC, USA; 2Department of Radiation Oncology, Virginia Hospital Center, Arlington, VA, USA; 3Department of Pulmonary/Critical Care Medicine, Virginia Hospital Center, Arlington, VA, USA; 4Department of Radiation Oncology, Frederick Memorial Hospital, Frederick, MD, USAIntroduction: Stereotactic body radiation therapy (SBRT is being increasingly applied in the treatment of non-small cell lung cancer (NSCLC because of its high local efficacy. This study aims to examine survival outcomes in elderly patients with inoperable stage I NSCLC treated with SBRT.Methods: A total of 31 patients with single lesions treated with fractionated SBRT from 2008 to 2011 were retrospectively analyzed. A median prescribed dose of 48 Gy was delivered to the prescription isodose line, over a median of four treatments. The median biologically effective dose (BED was 105.6 (range 37.50–180, and the median age was 73 (65–90 years. No patient received concurrent chemotherapy.Results: With a median follow up of 13 months (range, 4–40 months, the actuarial median overall survival (OS and progression-free survival (PFS were 32 months, and 19 months, respectively. The actuarial median local control (LC time was not reached. The survival outcomes at median follow up of 13 months were 80%, 68%, and 70% for LC, PFS, and OS, respectively. Univariate analysis revealed a BED of >100 Gy was associated with improved LC rates (P = 0.02, while squamous cell histology predicted for worse LC outcome at median follow up time of 13 months (P = 0.04. Increased tumor volume was a worse prognostic indicator of both LC and OS outcomes (P < 0.05. Finally, female gender was a better prognostic factor for OS than male gender (P = 0.006. There were no prognostic indicators of PFS that reached

  17. Concomitant boost radiation therapy for inoperable non-small-cell lung cancer: preliminary report of a prospective randomized study

    International Nuclear Information System (INIS)

    Sun, L.-M.; Leung, Stephen Wan; Wang, C.-J.; Chen, H.-C.; Fang, F.-M.; Huang, E.-Y.; Hsu, H.-C.; Yeh, S.-A.; Hsiung, C.-Y.; Huang, David T.

    2000-01-01

    Purpose: The radiation therapy results for patients with inoperable non-small-cell lung cancer (NSCLC) have been disappointing. Tumor dose escalation using concomitant boost technique (CBT) has been shown to improve local control in a few prospective studies. This trial was carried out to prospectively assess the radiation response and acute toxicity of CBT in comparison to the conventional treatment technique (CTT). Methods and Materials: Ninety-seven consecutive eligible patients were entered in this prospective clinical trial between November 1994 and February 1998. Patients were randomized to receive either CBT (43 patients) or CTT (54 patients) radiation therapy. These patients either refused chemotherapy or were judged as unsuitable for chemotherapy. Patients in the CBT group received 46.8 Gy in 26 fractions using large fields that encompassed the gross and occult disease. A concomitant boost of 18.2 Gy (0.7 Gy per fraction) was delivered to the gross disease using small fields with 1.5-cm margins. The small fields were treated concurrently with the large fields and the total dose to the tumor area was 65 Gy in 26 fractions. Patients in the CTT group received 70.8 Gy in 38 fractions. The acute toxicity between each group was compared. The response rate was analyzed and compared by treatment group, gender, age, stage, histology, initial Karnofsky performance score (KPS), severity of acute toxicity, and maximum body weight loss (MBWL) during treatment course. Results: The demographic parameters such as sex, age, and stage were evenly distributed in each treatment group. The majority of these patients had Stage IIIA and IIIB disease. Overall median treatment times were 39 days for the CBT group of patients and 62 days for the CTT group. No treatment-related mortality was found. There were 2 patients in the CTT group with acute RTOG Grade 3 lung toxicity, and no Grade 3 lung or esophageal toxicity was observed in CBT group. The response rates, assessed by

  18. Eu business-to-business trade contacts in waste management: a natural resource-based view approach

    Directory of Open Access Journals (Sweden)

    Ting Fa Margherita Chang

    2016-01-01

    Full Text Available This study analyzes the “Sewage and refuse disposal and sanitation” industry (Waste as a producer of services able to break down its negative externalities and transform them into an asset flow for competitive advantage. The conceptual lens used is the resource-based view (R-BV of the firm and in particular its spill-over, the “natural” R-BV. For EU-27 countries of the last decade, the Ghosh’s input-output model is applied to identify the valuable relationships concerning sale intermediate trade contacts (ITC. Furthermore Gini index and Lorenz curve demonstrate that Waste resource is quite concentrated and thus rare. This result suggests the necessity of developing initiatives aiming to strengthen the partnership between businesses, enhancing the sale-network profitability.

  19. Post-marketing safety evaluation of S-1 in patients with inoperable or recurrent breast cancer: especially in patients treated with S-1 + trastuzumab.

    Science.gov (United States)

    Saito, Yuki; Oshitanai, Risa; Terao, Mayako; Terada, Mizuho; Tsuda, Banri; Okamura, Takuho; Suzuki, Yasuhiro; Tokuda, Yutaka

    2011-09-01

    The purpose of this study was to assess the safety of S-1 in Japanese in inoperable or recurrent breast cancer patients. A prospective post-marketing surveillance was performed at 313 sites in Japan in patients with inoperable or recurrent breast cancer treated with S-1. We examined 1361 patients between January 2006 and December 2007 with regard to the incidence of adverse drug reactions graded by the Common Terminology Criteria for Adverse Events (CTCAE), version 3.0. At least one adverse drug reaction was encountered by 858 patients, with an overall incidence of 63.0% (858/1361). The incidence of Grade 3 or higher adverse drug reactions in a descending order was 14.7% (200/1361). In this study, the most common combination drug was trastuzumab. The overall incidence of adverse drug reactions was 63.5% (431/679 patients) in patients treated with S-1 alone, and 55.9% (66/118 patients) in patients treated with S-1 + trastuzumab. Monotherapy with S-1 or combination therapy with S-1 + trastuzumab was well tolerated for inoperable or recurrent breast cancer patients.

  20. Trade in goods

    DEFF Research Database (Denmark)

    Sørensen, Karsten Engsig

    2006-01-01

    An analysis of the rules governing trade in goods under the GATT agreement and the Agreement on Safeguards......An analysis of the rules governing trade in goods under the GATT agreement and the Agreement on Safeguards...

  1. Trade Agreements PTI

    Data.gov (United States)

    Department of Homeland Security — The objective of the Trade Agreements PTI is to advance CBP’s mission by working with internal and external stakeholders to facilitate legitimate trade and address...

  2. Emissions Trading Resources

    Science.gov (United States)

    Learn about emissions trading programs, also known as cap and trade programs, which are market-based policy tools for protecting human health and the environment by controlling emissions from a group of sources.

  3. The use of imatinib in the treatment of inoperable dermatofibrosarcoma protuberans in the area of the shoulder joint

    Directory of Open Access Journals (Sweden)

    Joanna Huszno

    2014-06-01

    Full Text Available Introduction. Dermatofibrosarcoma protuberans (DFSP is a rare sarcoma of the skin and subcutaneous tissue. The most common clinical problem is its local recurrence. The therapeutic procedure of choice is radical surgery. In the case of inoperable disease, targeted therapy with imatinib, a tyrosine kinase inhibitor, may cause significant reduction of tumor volume and even enable radical surgery. Objective. We present the effectiveness of imatinib for the treatment of unresectable DFSP localized in the area of the shoulder joint of a 62-year-old woman. Case report. The patient met the criteria for inclusion in treatment with imatinib. After 3 cycles of treatment, partial regression of the lesions (above 50% was observed. Therapy was complicated by hepatological side effects during the sixth cycle. Treatment was continued with a reduced dose when transaminase levels normalized. In a physical examination and imaging studies, further regression was observed. The patient has regained considerable mobility of the shoulder joint. A decision to continue the treatment has been made. Conclusions. The use of imatinib allowed a clinical benefit to be gained in the form of significant regression of lesions. A very good treatment response and significant improvement in quality of life of the patient were achieved. The patient has been treated with imatinib for 30 months.

  4. Symptom prevalence, intensity, and distress in patients with inoperable lung cancer in relation to time of death.

    Science.gov (United States)

    Tishelman, Carol; Petersson, Lena-Marie; Degner, Lesley F; Sprangers, Mirjam A G

    2007-12-01

    To examine symptom prevalence, intensity, and association with distress in patients with inoperable lung cancer (LC), using time to death as point of reference. A consecutive sample of 400 patients completed the European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire C30 plus a 13-item LC-specific scale and the Thurstone Scale of Symptom Distress-Lung Cancer at six time points during the first year after diagnosis. Patients were divided into subgroups, using data from the time point closest to death ( 2 to 3; > 3 to 6; > 6 to 12; and > 12 months before death) for analysis. More than 50% of patients in all subgroups reported problems related to physical, role, and emotional functioning; fatigue; dyspnea; and cough. In general, functional levels were lower and symptoms higher in subgroups closer to death. Notably, clinically relevant differences were also found in role and social functioning and appetite loss between the two groups furthest from death. A consistent pattern was found among the six subgroups, with breathing, pain, and fatigue rated as the symptoms most associated with distress. High prevalence of symptoms was found in all subgroups, with higher intensity in subgroups closer to death, indicating a need for prophylactic and proactive symptom management. Less concordance was found among symptom prevalence, intensity, and association with distress in subgroups further from death. Future studies should investigate longitudinal associations between symptoms with low intensity and high distress, and examine their clinical implications.

  5. Fossil resource trade balances. Emerging trends for the UK

    International Nuclear Information System (INIS)

    Papathanasopoulou, Eleni; Jackson, Tim

    2008-01-01

    The aim of this paper is to examine the extent to which the UK can be classified as a net importer of fossil resources and a creator of pollution havens abroad between 1968 and 2000. Using input-output techniques and a derived Resource Flow Classification System, both the physical trade balance (PTB) and pollution trade balance (UTB) associated with fossil resource use are computed. The PTB shows that between 1968 and the early 1980's the UK is presented as a net importer of direct fossil resource flows. Between 1984 and 2000, the UK is identified as a net exporter of direct fossil resources. These trends are primarily explained by the UK's discovery and commercial production of North Sea oil and gas fields in the late 1970s. On the other hand, the UTB shows that over the whole period the indirect used flows attributable to the UK's exports are higher than those attributable to its imports. These findings suggest that the UK did not create pollution havens abroad from the use of fossil resources between 1968 and 2000. However, it is noticeable in both cases that from 1995 the UK's position as a net exporter has been decreasing considerably. Maturing North Sea oil and gas fields set against increasing demands for fossil fuels and imported goods is signalling a return to the UK's pre-1984 dependence on direct imported fossil resources and the possible creation of pollution havens abroad. Knowledge of these trends contributes to the evidence base for the UK's changing import and export structure and the potential environmental repercussions at home and abroad. (author)

  6. Individual Attitudes Towards Trade

    DEFF Research Database (Denmark)

    Jäkel, Ina Charlotte; Smolka, Marcel

    2013-01-01

    Using the 2007 wave of the Pew Global Attitudes Project, this paper finds statistically significant and economically large Stolper-Samuelson effects in individuals’ preference formation towards trade policy. High-skilled individuals are substantially more pro-trade than low-skilled individuals......-Ohlin model in shaping free trade attitudes, relative to existing literature....

  7. African agricultural trade

    DEFF Research Database (Denmark)

    Jensen, Hans Grinsted; Sandrey, Ron

    2015-01-01

    This article starts with a profile of African agricultural trade. Using the pre-release version 9.2 of the GTAP database, we then show that the results for tariff elimination on intra-African trade are promising, but these tariff barriers are not as significant as the various trade-related barriers...

  8. JAPAN'S TECHNOLOGY TRADE

    OpenAIRE

    Hagiwara, Taiji

    1994-01-01

    Japan's technology balance of trade has improved over the last twenty years. The position of Japan is examined through (1) comparison with other OECD countries, (2) the historical change in Japan's technology trade at the industry level, (3) Toshiba's technology trade as a typical case. The conclusion is that Japan is still behind the frontier of innovation.

  9. Banking and Trading

    NARCIS (Netherlands)

    Boot, A.W.A.; Ratnovski, L.

    2016-01-01

    We study the interaction between relationship banking and short-term arm’s length activities of banks, called trading. We show that a bank can use the franchise value of its relationships to expand the scale of trading, but may allocate too much capital to trading ex post , compromising its ability

  10. Trade Remedies: A Primer

    National Research Council Canada - National Science Library

    Jones, Vivian C

    2006-01-01

    The United States and many of its trading partners use laws known as trade remedies to mitigate the adverse impact of various trade practices on domestic industries and workers. U.S. antidumping laws (19 U.S.C. 1673 et seq...

  11. Assessment of China's virtual air pollution transport embodied in trade by using a consumption-based emission inventory

    Science.gov (United States)

    Zhao, H. Y.; Zhang, Q.; Guan, D. B.; Davis, S. J.; Liu, Z.; Huo, H.; Lin, J. T.; Liu, W. D.; He, K. B.

    2015-05-01

    Substantial anthropogenic emissions from China have resulted in serious air pollution, and this has generated considerable academic and public concern. The physical transport of air pollutants in the atmosphere has been extensively investigated; however, understanding the mechanisms how the pollutant was transferred through economic and trade activities remains a challenge. For the first time, we quantified and tracked China's air pollutant emission flows embodied in interprovincial trade, using a multiregional input-output model framework. Trade relative emissions for four key air pollutants (primary fine particle matter, sulfur dioxide, nitrogen oxides and non-methane volatile organic compounds) were assessed for 2007 in each Chinese province. We found that emissions were significantly redistributed among provinces owing to interprovincial trade. Large amounts of emissions were embodied in the imports of eastern regions from northern and central regions, and these were determined by differences in regional economic status and environmental policy. It is suggested that measures should be introduced to reduce air pollution by integrating cross-regional consumers and producers within national agreements to encourage efficiency improvement in the supply chain and optimize consumption structure internationally. The consumption-based air pollutant emission inventory developed in this work can be further used to attribute pollution to various economic activities and final demand types with the aid of air quality models.

  12. Measuring Trade and Trade Potential : A Survey

    OpenAIRE

    Shiro Armstrong

    2007-01-01

    This paper provides a survey and a brief critical review of the literature on the widely used gravity models of trade, as a prelude to the justification of its use with the stochastic frontier methodology. The important papers on the theoretical foundations of the gravity model are reviewed and related to papers applied to explain determinants of trade flows. Then some shortcomings of the gravity model are discussed. The paper introduces the stochastic frontier gravity model as a way of estim...

  13. Dealing with Trading Thinness in Event Studies: An Improved Trade-to-Trade Model

    OpenAIRE

    Warwick Anderson

    2012-01-01

    This paper offers an improvement to the trade-to-trade model for event studies. While the trade-to-trade model of Maynes and Rumsey (1993) addresses the problem of thin trading by eliminating periods in which no trading is recorded, the proposed improvement addresses the influence of zero-value returns resulting from liquidity trading. This entails segmentation by the sign of company returns (positive, negative, zero). The approach allows for all levels of thinness in security trading. It is ...

  14. Surgical outcome of patients considered to have "inoperable" tumors by specialized pediatric neuro-oncological multidisciplinary teams.

    Science.gov (United States)

    Teo, Charles; Charles, Teo; Broggi, Morgan; Morgan, Broggi

    2010-09-01

    Despite the lack of evidence in literature, it is widely felt that patient outcomes will be improved by adopting a multidisciplinary team (MDT) approach to children with brain tumors. This study focuses on a series of pediatric patients treated surgically despite a MDT recommendation against surgery. A retrospective study was conducted on all pediatric brain and spinal cord tumor patients operated in a single center from 1999 to 2009. Of the 256 surgical patients, 47 patients (18%) had been previously seen by a MDT who had recommended against surgery. Details of preoperative treatment, diagnosis and clinical status, postoperative diagnosis, early and late outcomes, progression-free survival and overall survival, and parental satisfaction were reviewed. There was a single case of surgical mortality, and 14 patients have since died from their primary disease an average of 21 months after surgery. Of the patients who are alive, only four (12.5%) have permanent neurological sequelae despite nine patients presenting in a terminal status. In ten cases, radical removal of the tumor resulted in a change in histological diagnosis, usually from a presumed diagnosis of malignancy to a more benign variety (n = 6). Not a single parent expressed regret over the decision to undergo surgery. In the majority of patients, surgical decision making is congruent with the collective opinion of dedicated pediatric neuro-oncological MDT. However, sometimes the surgeon's opinion may be incongruous with MDT recommendation. This series demonstrates the dramatic and favorable potential long-term outcomes that may be achieved with surgery of so-called inoperable lesions.

  15. Commercial versus PARTNER study experience with the transfemoral Edwards SAPIEN valve for inoperable patients with severe aortic stenosis.

    Science.gov (United States)

    Pendyala, Lakshmana K; Minha, Sa'ar; Barbash, Israel M; Torguson, Rebecca; Magalhaes, Marco A; Okubagzi, Petros; Loh, Joshua P; Chen, Fang; Satler, Lowell F; Pichard, Augusto D; Waksman, Ron

    2014-01-15

    In patients with aortic stenosis who cannot have surgery, transcatheter aortic valve replacement using the Edwards SAPIEN valve has been shown to improve survival rate and is approved for commercial use in the United States. This study aims to assess the clinical profile, procedural characteristics, and in-hospital complications in patients treated with a commercial SAPIEN valve outside the clinical trial context. We retrospectively analyzed 69 consecutive patients who underwent transcatheter aortic valve replacement with a commercial SAPIEN valve compared with 55 Placement of AoRTic traNscathetER valves (PARTNER) trial patients from cohort B enrolled in the same institution by the same Heart Team. Compared with the commercial group, patients in the PARTNER cohort B had higher mean Society of Thoracic Surgeons score (10 ± 5 vs 9 ± 4, p = 0.04) and a lower rate of peripheral arterial disease (19% vs 44%, p = 0.004). Most patients in the commercial group had the procedure under conscious sedation (83% vs 66%, p = 0.03). Planned surgical cut down for vascular access was rare in the commercial group (1.4% vs 46%, p commercial group (7.2% vs 27%, p = 0.003; 2.9% vs 16%, p = 0.01; and 28% vs 60%, p commercial group. In conclusion, transfemoral commercial use of the Edwards SAPIEN valve for inoperable patients shows similar in-hospital mortality and stroke rates compared with PARTNER cohort B. The refinements in the procedure such as more conscious sedation, experience of the operators, and careful vascular planning in the commercial group led to lesser vascular and bleeding complications and shorter length of stay. Copyright © 2014 Elsevier Inc. All rights reserved.

  16. Cost-Effectiveness Analysis of Stereotactic Body Radiation Therapy Compared With Radiofrequency Ablation for Inoperable Colorectal Liver Metastases

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hayeon, E-mail: kimh2@upmc.edu [Department of Radiation Oncology, University of Pittsburgh Cancer Institute, Pittsburgh, Pennsylvania (United States); Gill, Beant; Beriwal, Sushil; Huq, M. Saiful [Department of Radiation Oncology, University of Pittsburgh Cancer Institute, Pittsburgh, Pennsylvania (United States); Roberts, Mark S. [Department of Health Policy and Management, University of Pittsburgh School of Public Health, Pittsburgh, Pennsylvania (United States); Smith, Kenneth J. [Department of Medicine, University of Pittsburgh School of Medicine, Pittsburgh, Pennsylvania (United States)

    2016-07-15

    Purpose: To conduct a cost-effectiveness analysis to determine whether stereotactic body radiation therapy (SBRT) is a cost-effective therapy compared with radiofrequency ablation (RFA) for patients with unresectable colorectal cancer (CRC) liver metastases. Methods and Materials: A cost-effectiveness analysis was conducted using a Markov model and 1-month cycle over a lifetime horizon. Transition probabilities, quality of life utilities, and costs associated with SBRT and RFA were captured in the model on the basis of a comprehensive literature review and Medicare reimbursements in 2014. Strategies were compared using the incremental cost-effectiveness ratio, with effectiveness measured in quality-adjusted life years (QALYs). To account for model uncertainty, 1-way and probabilistic sensitivity analyses were performed. Strategies were evaluated with a willingness-to-pay threshold of $100,000 per QALY gained. Results: In base case analysis, treatment costs for 3 fractions of SBRT and 1 RFA procedure were $13,000 and $4397, respectively. Median survival was assumed the same for both strategies (25 months). The SBRT costs $8202 more than RFA while gaining 0.05 QALYs, resulting in an incremental cost-effectiveness ratio of $164,660 per QALY gained. In 1-way sensitivity analyses, results were most sensitive to variation of median survival from both treatments. Stereotactic body radiation therapy was economically reasonable if better survival was presumed (>1 month gain) or if used for large tumors (>4 cm). Conclusions: If equal survival is assumed, SBRT is not cost-effective compared with RFA for inoperable colorectal liver metastases. However, if better local control leads to small survival gains with SBRT, this strategy becomes cost-effective. Ideally, these results should be confirmed with prospective comparative data.

  17. Outcome of three-dimensional conformal radiation therapy and intensity-modulated radiation therapy for inoperable locally advanced pancreatic cancer

    International Nuclear Information System (INIS)

    Lu Ningning; Jin Jing; Li Yexiong; Yu Zihao; Liu Xinfan; Wang Weihu; Wang Shulian; Song Yongwen; Liu Yuping

    2009-01-01

    Objective: To evaluate the outcome of radiotherapy for locally advanced pancreatic cancer. Methods: From January 2000 to December 2007, 41 patients with inoperable locally advanced (stage III) pancreatic cancer were treated with three-dimensional conformal radiation therapy(3DCRT) or intensity-modulated radiation therapy (IMRT). Among these patients, 30 received concurrent radio-chemo-therapy. Results: The median survival time(MST) and 1-year overall survival were 9.2 months and 23%. Patients with pretreatment KPS ≥ 80, no regional lymph nodes metastasis, and CR/PR after radiotherapy had better prognosis. The corresponding MSTs were 11.1 months vs 5.8 months (χ 2 =7.50, P=0.006), 10.8 months vs 6.5 months(χ 2 =5.67, P=0.017), and 19.5 months vs 9.1 months (χ 2 =7.28, P=0.007), respectively. Concurrent radio-chemotherapy tended to improve the overall survival(χ 2 =3.25, P=0.072). After radiotherapy, 18 patients had clinical benefit response, mainly being abdominal pain relief. Neither grade 4 hematologic nor grade 3 non-hematologic toxicities were observed. Conclusions: For patients with locally advanced pancreatic cancer, both 3DCRT and IMRT are effective in alleviation of disease-related symptoms. Patients with better performance status before treatment, no regional lymph nodes metastasis, and better response to radiotherapy may have better prognosis. Concurrent radio-chemotherapy trend to improve overall survival when compared with radiotherapy alone. (authors)

  18. Can bilateral trade agreements help induce free trade?

    OpenAIRE

    Riezman, Raymond Glenn

    1999-01-01

    There has been growing debate about whether bilateral trade agreements are damaging multilateral efforts to eliminate barriers to international trade. This paper develops a model in which trading blocks always charge optimal tariffs and make trade agreements based on strategic considerations. We ask a very simple question. Does the fact that trading blocks can form bilateral trade agreements make Free trade less likely to occur? The answer is that it depends on the size distribution of the tr...

  19. Analysis and Application of Quality Economics Based on Input-Output

    Science.gov (United States)

    Lu, Qiang; Li, Xin

    2018-01-01

    Quality economics analysis is an important research area in the current economic frontier, which has a huge role in promoting the quality-benefit type road development in China. Through the study of quality economics analysis and application, economics of quality and quality economics management are summarized, and theoretical framework of quality economics analysis is constructed. Finally, the quality economics analysis of aerospace equipment is taken as an example to carry on the application research.

  20. Relating the environmental impact of consumption to household expenditures : An input-output analysis

    NARCIS (Netherlands)

    Kerkhof, Annemarie C.; Nonhebel, Sanderine; Moll, Henri C.

    2009-01-01

    In this paper we evaluate the relationships between household expenditures and the environmental impact categories climate change, acidification, eutrophication and smog formation, by combining household expenditures with environmentally extended input–output analysis. Expenditure elasticities are

  1. Approximation of Quantum Stochastic Differential Equations for Input-Output Model Reduction

    Science.gov (United States)

    2016-02-25

    34Quantum information science and engineering," H. Mabuchi, seminar at Qualcomm, Santa Clara, CA, 4 May 2015 "Quantum engineering and coherent feedback...theory," H. Mabuchi, Optics and Electronics Seminar, Stanford, CA 5 Jan 2015 "Quantum information science and engineering," H. Mabuchi, seminar...Mabuchi, seminar at ARL, Adelphi, MD, 6 Nov 2014 "Quantum nonlinear optics and the renaissance of photonic computing," H. Mabuchi, physics colloquium

  2. Age-Related Interference between the Selection of Input-Output Modality Mappings and Postural Control

    OpenAIRE

    Stelzel, Christine; Schauenburg, Gesche; Rapp, Michael A.; Heinzel, Stephan; Granacher, Urs

    2017-01-01

    Age-related decline in executive functions and postural control due to degenerative processes in the central nervous system have been related to increased fall-risk in old age. Many studies have shown cognitive-postural dual-task interference in old adults, but research on the role of specific executive functions in this context has just begun. In this study, we addressed the question whether postural control is impaired depending on the coordination of concurrent response-selection processes...

  3. Intrinsic Information Processing and Energy Dissipation in Stochastic Input-Output Dynamical Systems

    Science.gov (United States)

    2015-07-09

    Amrine (Dept Viticulture and Enology ) on “Measuring ‘Functional’ Information in transfer-RNAs to detect and resolve inconsistencies in deep roots of the...Learning Group Seminar, Complexity Sciences Center, UC Davis. 27. Katie Amrine (Dept Viticulture and Enology ) on “Measuring ‘Functional’ Information in

  4. Evaluating the Economic Impacts of Technological Innovation in the Automobile Industry: The Input-Output Approach

    OpenAIRE

    Hiroyuki Shibusawa; Takafumi Sugawara

    2011-01-01

    In this paper, the economic impacts of technological innovation, such as electric and hybrid vehicles, in the automobile industry in Japan are examined. The automobile industry has to develop environmentally friendly vehicles in the face of the global warming issue and the exhaustion problem of petroleum. The conventional automobiles with gasoline and diesel oil don't meet the demands of present age. The new generation automobiles will become popular for coming several decades. The industrial...

  5. Modelling Implicit Communication in Multi-Agent Systems with Hybrid Input/Output Automata

    Directory of Open Access Journals (Sweden)

    Marta Capiluppi

    2012-10-01

    Full Text Available We propose an extension of Hybrid I/O Automata (HIOAs to model agent systems and their implicit communication through perturbation of the environment, like localization of objects or radio signals diffusion and detection. To this end we decided to specialize some variables of the HIOAs whose values are functions both of time and space. We call them world variables. Basically they are treated similarly to the other variables of HIOAs, but they have the function of representing the interaction of each automaton with the surrounding environment, hence they can be output, input or internal variables. Since these special variables have the role of simulating implicit communication, their dynamics are specified both in time and space, because they model the perturbations induced by the agent to the environment, and the perturbations of the environment as perceived by the agent. Parallel composition of world variables is slightly different from parallel composition of the other variables, since their signals are summed. The theory is illustrated through a simple example of agents systems.

  6. A Variable Input-Output Model for Inflation, Growth, and Energy for the Korean Economy.

    Science.gov (United States)

    1983-12-01

    and the sales price of cukput as determinan-s of the technical coefficients were suggested by Walras [Ref. 4] and many other eco.cmis.s. (Ref. 5] Arrow...1967, 1975 and 1979. Seoul,Ko:rea: Fesearch Department. S. 4. Walras , L. Elemerts of Pure Economics, (3nglish Edition). George Allen and Urwin

  7. Integrating Ecological and Water Footprint Accounting in a Multi-Regional Input-Output Framework

    Science.gov (United States)

    Carbon, ecological, and water footprints (CF, EF, and WF) are accounting tools that can be used to understand the connection between consumption activities and environmental pressures on the Earth?s atmosphere, bioproductive areas, and freshwater resources. These indicators have ...

  8. Input-output analysis of energy requirements for short rotation, intensive culture, woody biomass

    International Nuclear Information System (INIS)

    Strauss, C.H.; Grado, S.C.

    1992-01-01

    A production model for short rotation, intensive culture (SRIC) plantations was developed to determine the energy and financial cost of woody biomass. The model was based on hybrid poplars planted on good quality agricultural sites at a density of 2100 cuttings ha -1 , with average annual growth forecast at 16 metric tonne, oven dry (mg(OD)). Energy and financial analyses showed preharvest cost 4381 megajoules (MJ) Mg -1 (OD) and $16 (US) Mg -1 (OD). Harvesting and transportation requirements increased the total costs 6130 MJ Mg -1 (OD) and $39 Mg -1 (OD) for the delivered material. On an energy cost basis, the principal input was land, whereas on a financial basis, costs were more uniformly distributed among equipment, land, labor, and materials and fuel

  9. Sectoral risk research about input-output structure of the United States

    Science.gov (United States)

    Zhang, Mao

    2018-02-01

    There exist rare researches about economic risk in sectoral level, which is significantly important for risk prewarning. This paper employed status coefficient to measure the symmetry of economic subnetwork, which is negatively correlated with sectoral risk. Then, we do empirical research in both cross section and time series dimensions. In cross section dimension, we study the correlation between sectoral status coefficient and sectoral volatility, earning rate and Sharpe ratio respectively in the year 2015. Next, in the perspective of time series, we first investigate the correlation change between sectoral status coefficient and annual total output from 1997 to 2015. Then, we divide the 71 sectors in America into agriculture, manufacturing, services and government, compare the trend terms of average sectoral status coefficients of the four industries and illustrate the causes behind it. We also find obvious abnormality in the sector of housing. At last, this paper puts forward some suggestions for the federal government.

  10. Energy intensity of computer manufacturing: hybrid assessment combining process and economic input-output methods.

    Science.gov (United States)

    Williams, Eric

    2004-11-15

    The total energy and fossil fuels used in producing a desktop computer with 17-in. CRT monitor are estimated at 6400 megajoules (MJ) and 260 kg, respectively. This indicates that computer manufacturing is energy intensive: the ratio of fossil fuel use to product weight is 11, an order of magnitude larger than the factor of 1-2 for many other manufactured goods. This high energy intensity of manufacturing, combined with rapid turnover in computers, results in an annual life cycle energy burden that is surprisingly high: about 2600 MJ per year, 1.3 times that of a refrigerator. In contrast with many home appliances, life cycle energy use of a computer is dominated by production (81%) as opposed to operation (19%). Extension of usable lifespan (e.g. by reselling or upgrading) is thus a promising approach to mitigating energy impacts as well as other environmental burdens associated with manufacturing and disposal.

  11. Input-output analysis of various elements of an energy-agro-waste complex

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-01

    The mass input and output streams of various agricultural and waste treatment processes were quantified and models developed to serve in the engineering analysis of potential waste heat utilization schemes. The unit process models can be integrated into energy-agro-waste complexes, in which waste heat from power plants is used by certain processes and the wastes of some processes are used as inputs to others. The models provide a means of determining the sizing or subsystems, the compatibility of subsystems, and the overall feasibility of an integrated complex. Ten potential complexes were qualitatively discussed and the considerations involved in forming such complexes explained. A mass balance analysis was performed on four integrated complexes demonstrating the engineering value of the analytical models developed.

  12. Sensory activity and food intake : a study of input-output relationships in two phytophagous insects

    NARCIS (Netherlands)

    Blom, F.

    1978-01-01

    The relationships were studied between sensory responses and behavioural responses to the same stimulus. Sensory and behavioural reactions were both quantified according to stimulus type and concentration. Correlations between relative sensory responses and relative behavioural responses

  13. Economy-wide material input/output and dematerialization analysis of Jilin Province (China).

    Science.gov (United States)

    Li, MingSheng; Zhang, HuiMin; Li, Zhi; Tong, LianJun

    2010-06-01

    In this paper, both direct material input (DMI) and domestic processed output (DPO) of Jilin Province in 1990-2006 were calculated and then based on these two indexes, a dematerialization model was established. The main results are summarized as follows: (1) both direct material input and domestic processed output increase at a steady rate during 1990-2006, with average annual growth rates of 4.19% and 2.77%, respectively. (2) The average contribution rate of material input to economic growth is 44%, indicating that the economic growth is visibly extensive. (3) During the studied period, accumulative quantity of material input dematerialization is 11,543 x 10(4) t and quantity of waste dematerialization is 5,987 x10(4) t. Moreover, dematerialization gaps are positive, suggesting that the potential of dematerialization has been well fulfilled. (4) In most years of the analyzed period, especially 2003-2006, the economic system of Jilin Province represents an unsustainable state. The accelerated economic growth relies mostly on excessive resources consumption after the Revitalization Strategy of Northeast China was launched.

  14. Central Cross-Talk in Task Switching : Evidence from Manipulating Input-Output Modality Compatibility

    Science.gov (United States)

    Stephan, Denise Nadine; Koch, Iring

    2010-01-01

    Two experiments examined the role of compatibility of input and output (I-O) modality mappings in task switching. We define I-O modality compatibility in terms of similarity of stimulus modality and modality of response-related sensory consequences. Experiment 1 included switching between 2 compatible tasks (auditory-vocal vs. visual-manual) and…

  15. GLOBAL MULTIREGIONAL INPUT-OUTPUT FRAMEWORKS : AN INTRODUCTION AND OUTLOOK INTRODUCTION

    NARCIS (Netherlands)

    Tukker, Arnold; Dietzenbacher, Erik

    2013-01-01

    This review is the introduction to a special issue of Economic Systems Research on the topic of global multiregional inputoutput (GMRIO) tables, models, and analysis. It provides a short historical context of GMRIO development and its applications (many of which deal with environmental extensions)

  16. Investigating time-efficiency of forward masking paradigms for estimating basilar membrane input-output characteristics

    DEFF Research Database (Denmark)

    Fereczkowski, Michal; Jepsen, Morten Løve; Dau, Torsten

    2017-01-01

    appears to be the main drawback of the conventional TMC method. The results from the present study were consistent with the literature when estimating KP levels, but showed some limitations regarding the estimation of the CR values. Perspectives and limitations of both approaches are discussed.......-output (I/O) function have been proposed. However, such measures are very time consuming. The present study investigated possible modifications of the temporal masking curve (TMC) paradigm to improve time and measurement efficiency. In experiment 1, estimates of knee point (KP) and compression ratio (CR......It is well known that pure-tone audiometry does not sufficiently describe individual hearing loss (HL) and that additional measures beyond pure-tone sensitivity might improve the diagnostics of hearing deficits. Specifically, forward masking experiments to estimate basilarmembrane (BM) input...

  17. Development of Input/Output System for the Reactor Transient Analysis System (RETAS)

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Jae Seung; Kang, Doo Hyuk; Cho, Yeon Sik [ENESYS, Daejeon (Korea, Republic of); Ahn, Seung Hoon; Cho, Yong Jin [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2009-05-15

    A Korea Institute of Nuclear Safety Reactor Transient Analysis System (KINS-RETAS) aims at providing a realistic prediction of core and RCS response to the potential or actual event scenarios in Korean nuclear power plants (NPPs). A thermal hydraulic system code MARS is a pivot code of the RETAS, and used to predict thermal hydraulic (TH) behaviors in the core and associated systems. MARS alone can be applied to many types of transients, but is sometimes coupled with the other codes developed for different objectives. Many tools have been developed to aid users in preparing input and displaying the transient information and output data. Output file and Graphical User Interfaces (GUI) that help prepare input decks, as seen in SNAP (Gitnick, 1998), VISA (K.D. Kim, 2007) and display aids include the eFAST (KINS, 2007). The tools listed above are graphical interfaces. The input deck builders allow the user to create a functional diagram of the plant, pictorially on the screen. The functional diagram, when annotated with control volume and junction numbers, is a nodalization diagram. Data required for an input deck is entered for volumes and junctions through a mouse-driven menu and pop-up dialog; after the information is complete, an input deck is generated. Display GUIs show data from MARS calculations, either during or after the transient. The RETAS requires the user to first generate a set of 'input', two dimensional pictures of the plant on which some of the data is displayed either numerically or with a color map. The RETAS can generate XY-plots of the data. Time histories of plant conditions can be seen via the plots or through the RETAS's replay mode. The user input was combined with design input from MARS developers and experts from both the GUI and ergonomics fields. A partial list of capabilities follows. - 3D display for neutronics. - Easier method (less user time and effort) to generate 'input' for the 3D displays. - Detailed view of data at volume or junction with just a mouse click on the screen. - Interactive MARS run control (start, pause, restart, replay and stop). - Easy access to MARS peripherals. - Easy access to helpful applications such as text editor and spreadsheet. - Portability across workstations (UNIX) and PCs (Windows 98, Me, Xp, 2003 or Vista). - Window/menu/ mouse interfaces. These ideas were used as the basis for the design of RETAS. The result is a fundamentally new kind of GUI in the nuclear power plant analysis field. MARS is no longer the central focus, but rather, the focus becomes doing nuclear safety analyses from a central workspace with an arsenal of tools at the analyst's disposal. The workspace is the same on any PC, but with the native look and feel of the platform. MARS is the principal application; but others are accessible through the workspace and can be used simultaneously and in conjunction with one another to enhance the user's ability to do complicated analyses.

  18. Input-output characteristics of the tectorial membrane in the frog basilar papilla

    NARCIS (Netherlands)

    Schoffelen, Richard L. M.; Segenhout, Johannes M.; van Dijk, Pim

    2010-01-01

    The basilar papilla (BP) in the frog inner ear is a relatively simple auditory receptor. Its hair cells are embedded in a stiff support structure, with the stereovilli connecting to a flexible tectorial membrane (TM). Acoustic energy passing the papilla presumably causes displacement of the TM,

  19. State Space Consistency and Differentiability Conditions for a Class of Causal Dynamical Input-Output Systems

    Science.gov (United States)

    2008-01-01

    kvk 4-10 NSWCDD/TR-08/3 = sup v supr 2 R10 R10 f(r; 1; 2)u(r 1)v(r 2)d1d2 kvk sup v 2 supr qR1 0 R1 0 kf(r; 1; 2)k 2 d1d2 qR1 ...0 R1 0 ku(1)v(2)k 2 d1d2 kvk = sup v 2 supr qR1 0 R1 0 kf(r; 1; 2)k 2 d1d2 qR1 0 ku(1)k 2 d1 qR1 0 kv(2)k 2 d2 kvk 2M kuk kvkkvk

  20. Productive chains in Costa Rica: an application from data matrix input-output

    Directory of Open Access Journals (Sweden)

    Carlos Chaverri Morales

    2016-05-01

    Results confirm not only the consolidation process experienced by the activities and products related to the services sector as a motor of the Costa Rican economic activity, but also the idea that these activities generate the highest forward linkages.

  1. Can Non-point Phosphorus Emissions from Agriculture be Regulated efficiently using Input-Output Taxes?

    OpenAIRE

    Line Block Hansen; Lars Gårn Hansen

    2012-01-01

    In many parts of Europe and North America, phosphorus loss from cultivated fields is threatening natural ecosystems. Though there are similarities to other non-point agricultural emissions like nitrogen that have been studied extensively, phosphorus is often characterised by the presence of large stocking capacities for phosphorus in farm soils and long time-lags between applications and emission. This makes it important to understand the dynamics of the phosphorus emission problem when desig...

  2. Low operating bias and matched input-output characteristics in graphene logic inverters.

    Science.gov (United States)

    Li, Song-Lin; Miyazaki, Hisao; Kumatani, Akichika; Kanda, Akinobu; Tsukagoshi, Kazuhito

    2010-07-14

    We developed a simple and novel method to fabricate complementary-like logic inverters based on ambipolar graphene field-effect transistors (FETs). We found that the top gate stacks (with both the metal and oxide layers) can be simply prepared with only one-step deposition process and show high capacitive efficiency. By employing such a top gate as the operating terminal, the operating bias can be lowered within 2 V. In addition, the complementary p- and n-type FET pairs can be also simply fulfilled through potential superposition effect from the drain bias. The inverters can be operated, with up to 4-7 voltage gains, in both the first and third quadrants due to the ambipolarity of graphene FETs. For the first time, a match between the input and output voltages is achieved in graphene logic devices, indicating the potential in direct cascading of multiple devices for future nanoelectronic applications.

  3. Major disasters in modern economies: An input-output based approach at modelling imbalances and disproportions

    NARCIS (Netherlands)

    Bockarjova, M.

    2007-01-01

    It seems that large-scale disasters are becoming an inevitable part of modern societies. Major calamities such as earthquakes, typhoons, and tsunamis are endangering the lives of many people and their possessions all over the world. Some of the most obvious questions to address are: How vulnerable

  4. The Canadian Defence Input-Output Model DIO Version 4.41

    Science.gov (United States)

    2011-09-01

    40 0320 Gold and alloys in primary forms 41 0340 Iron ores and concentrates 42 03501 Bauxite ore 43 03502 Alumina (refined bauxite ) 44 03601 Copper...and gravel, excluding silica 58 0501 Stone and silica sand for industrial use 59 0502 Building and crushed stone 60 0510 Services incidental to mining ...32311 Construction machinery 355 32312 Mining and oil and gas field machinery 356 3232 Logging and pulp and paper industry machinery 357 3233 Metal

  5. Input-Output Decoupling of a Distillation Column LV-Configuration

    DEFF Research Database (Denmark)

    Yazdi, H.; Jørgensen, Sten Bay; Bahar (fratrådt), Mehrdad

    1996-01-01

    Introduction, digraph approach, distillation column, digraph analysis, solution analysis, discussion and conclusion, references.......Introduction, digraph approach, distillation column, digraph analysis, solution analysis, discussion and conclusion, references....

  6. Computer code ANISN multiplying media and shielding calculation II. Code description (input/output)

    International Nuclear Information System (INIS)

    Maiorino, J.R.

    1990-01-01

    The user manual of the ANISN computer code describing input and output subroutines is presented. ANISN code was developed to solve one-dimensional transport equation for neutron or gamma rays in slab, sphere or cylinder geometry with general anisotropic scattering. The solution technique is the discrete ordinate method. (M.C.K.)

  7. Tempo: A Toolkit for the Timed Input/Output Automata Formalism

    National Research Council Canada - National Science Library

    Lynch, Nancy A; Shvartsman, Alex Allister

    2008-01-01

    Report developed under STTR contract for topic AFO4-T023. This Phase II project developed an integrated development environment, called Tempo, for specifying, analyzing, and verifying complex distributed system designs...

  8. Can non-point phosphorus emissions from agriculture be regulated efficiently using input-output taxes?

    DEFF Research Database (Denmark)

    Hansen, Line Bloch; Hansen, Lars Gårn

    stocking capacities for phosphorus in farm soils and long time-lags between applications and emission. This makes it important to understand the dynamics of the phosphorus emission problem when designing regulatory systems. Using a model that reflects these dynamics, we evaluate alternative regulatory......In many parts of Europe and North America, phosphorus loss from cultivated fields is threatening natural ecosystems. Though there are similarities to other non-point agricultural emissions like nitrogen that have been studied extensively, phosphorus is often characterised by the presence of large...

  9. Can non-point pollutions emissions from agriculture be regulated efficiently using input-output taxes?

    DEFF Research Database (Denmark)

    Hansen, Line Block; Hansen, Lars Gårn

    2012-01-01

    stocking capacities for phosphorus in farm soils and long time-lags between applications and emission. This makes it important to understand the dynamics of the phosphorus emission problem when designing regulatory systems. Using a model that reflects these dynamics, we evaluate alternative regulatory......In many parts of Europe and North America, phosphorus loss from cultivated fields is threatening natural ecosystems. Though there are similarities to other non-point agricultural emissions like nitrogen that have been studied extensively, phosphorus is often characterized by the presence of large...

  10. Can non-point Phosphorus emissions from agriculture be regulated efficiently using input-output taxes?

    DEFF Research Database (Denmark)

    Hansen, Line Block; Hansen, Lars Gårn

    2014-01-01

    stocking capacities for phosphorus in farm soils and long time-lags between applications and emission. This makes it important to understand the dynamics of the phosphorus emission problem when designing regulatory systems. Using a model that reflects these dynamics, we evaluate alternative regulatory......In many parts of Europe and North America, phosphorus loss from cultivated fields is threatening natural ecosystems. Though there are similarities to other non-point agricultural emissions like nitrogen that have been studied extensively, phosphorus is often characterized by the presence of large...

  11. Indicators of European public research in hydrogen and fuel cells - An input-output analysis

    Energy Technology Data Exchange (ETDEWEB)

    Seymour, E. Hugo; Borges, Francisco C.; Fernandes, Rei [Instituto Superior Tecnico, Lisboa (Portugal). Mechanical Engineering Department, Research Group on Energy and Sustainable Development

    2007-10-15

    A prerequisite of any coordinated research activity is a comparison of the current status of research in the countries in question and a means to monitor the progress in particular sectors. Analysis of indicators of research in different countries allows comparison of the research undertaken. This paper compares input and output indicators of public research in hydrogen and fuel cells (H and FC) both within Europe and between Europe and the US, Japan and China. Overall the combined public H and FC research budget for the EU25 countries, associated states and accession countries was EUR276M in 2005, slightly higher than in the US, but lower than in Japan. An analysis of research outputs indicates that European competitive advantage is being lost to China and the US. Greater and more effective research coordination as well as more targeted allocation of research funds are proposed as potential solutions. (author)

  12. Extending the Multi Regional Input-Output framework to labor related impacts: a proof of concept

    DEFF Research Database (Denmark)

    Hardadi, Gilang; Pizzol, Massimo

    2017-01-01

    -O framework to social impacts. These challenges are addressed in this study where the Exiobase database was extended with new data on five quantitative indicators available from the International Labor Organization: employment; working hours; salary; occupational accident cases; and unemployment...

  13. Test for Nonlinear Input Output Relations in SISO Systems by Preliminary Data Analysis

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...... are developed. They are much more robust, especially the sinus method which is reliable also for colored, heavy tailed or skew distributed noise....

  14. Comparison of squashing and self-consistent input-output models of quantum feedback

    Science.gov (United States)

    Peřinová, V.; Lukš, A.; Křepelka, J.

    2018-03-01

    The paper (Yanagisawa and Hope, 2010) opens with two ways of analysis of a measurement-based quantum feedback. The scheme of the feedback includes, along with the homodyne detector, a modulator and a beamsplitter, which does not enable one to extract the nonclassical field. In the present scheme, the beamsplitter is replaced by the quantum noise evader, which makes it possible to extract the nonclassical field. We re-approach the comparison of two models related to the same scheme. The first one admits that in the feedback loop between the photon annihilation and creation operators, unusual commutation relations hold. As a consequence, in the feedback loop, squashing of the light occurs. In the second one, the description arrives at the feedback loop via unitary transformations. But it is obvious that the unitary transformation which describes the modulator changes even the annihilation operator of the mode which passes by the modulator which is not natural. The first model could be called "squashing model" and the second one could be named "self-consistent model". Although the predictions of the two models differ only a little and both the ways of analysis have their advantages, they have also their drawbacks and further investigation is possible.

  15. Training spiking neural networks to associate spatio-temporal input-output spike patterns

    OpenAIRE

    Mohemmed, A; Schliebs, S; Matsuda, S; Kasabov, N

    2013-01-01

    In a previous work (Mohemmed et al., Method for training a spiking neuron to associate input–output spike trains) [1] we have proposed a supervised learning algorithm based on temporal coding to train a spiking neuron to associate input spatiotemporal spike patterns to desired output spike patterns. The algorithm is based on the conversion of spike trains into analogue signals and the application of the Widrow–Hoff learning rule. In this paper we present a mathematical formulation of the prop...

  16. Low Power Digital Clock Design Using LVCMOS Input/Output Standards on 45nm FPGA

    DEFF Research Database (Denmark)

    Pandey, Sujeet; Mehta, Rishabh; Kalia, Kartik

    2016-01-01

    metal oxide semiconductor i.e. LVCMOS and 45nm Spartan-6 FPGA family is used for simulation and amount of total power consumed is noted down. There is 90.02%, 98.88%, 99.86% and 100% reduction in the clock when we scale down frequency from 100GHz to 10GHz, 1GHz, 0.1GHz, and 0.01GHz respectively.......How wonderful it would be if every device we use is energy efficient. This is an approach to design an efficient digital clock that consumes low amount of power. This is done by varying frequency to different levels and checking corresponding amount of energy consumed. Low Voltage Complementary...

  17. Determination of income, production, and employment under pollution control: an input-output approach

    Energy Technology Data Exchange (ETDEWEB)

    Rhee, J.J.; Miranowski, J.A.

    1984-02-01

    It can be shown that a variation of the multiplier approach solves the Leontief pollution model in a more directly interpretable and computationally efficient manner than the conventional method of directly using the augmented Leontief inverse matrix. The solution of each endogenous variable of the model can be expressed in terms of the non-augmented Leontief inverse, exogenous variables, and two important multipliers, ''the pollution control multiplier'' and ''a modified Keynesian multiplier,'' modified by pollution control. The so-called induced effect and the effect of pollution control on a given economy can be separated from the model. 6 references, 5 footnotes, 1 table.

  18. Idea Project Final Report, Distributed Input/ Output Subsystem For Traffic Signal Control

    Science.gov (United States)

    1995-07-01

    IN AN EFFORT TO ADD MORE AND MORE FEATURES (PREEMPTION, MALFUNCTION MANAGEMENT, WEATHER MONITORING, AND DYNAMIC LANE ASSIGNMENT, AMONG OTHERS) TO TRAFFIC SIGNAL SYSTEMS, THE TRAFFIC SIGNAL CABINET HAS BECOME VERY : COMPLICATED (FIGURE 1). FURTHERMORE...

  19. Transportation network with fluctuating input/output designed by the bio-inspired Physarum algorithm.

    Science.gov (United States)

    Watanabe, Shin; Takamatsu, Atsuko

    2014-01-01

    In this paper, we propose designing transportation network topology and traffic distribution under fluctuating conditions using a bio-inspired algorithm. The algorithm is inspired by the adaptive behavior observed in an amoeba-like organism, plasmodial slime mold, more formally known as plasmodium of Physarum plycephalum. This organism forms a transportation network to distribute its protoplasm, the fluidic contents of its cell, throughout its large cell body. In this process, the diameter of the transportation tubes adapts to the flux of the protoplasm. The Physarum algorithm, which mimics this adaptive behavior, has been widely applied to complex problems, such as maze solving and designing the topology of railroad grids, under static conditions. However, in most situations, environmental conditions fluctuate; for example, in power grids, the consumption of electric power shows daily, weekly, and annual periodicity depending on the lifestyles or the business needs of the individual consumers. This paper studies the design of network topology and traffic distribution with oscillatory input and output traffic flows. The network topology proposed by the Physarum algorithm is controlled by a parameter of the adaptation process of the tubes. We observe various rich topologies such as complete mesh, partial mesh, Y-shaped, and V-shaped networks depending on this adaptation parameter and evaluate them on the basis of three performance functions: loss, cost, and vulnerability. Our results indicate that consideration of the oscillatory conditions and the phase-lags in the multiple outputs of the network is important: The building and/or maintenance cost of the network can be reduced by introducing the oscillating condition, and when the phase-lag among the outputs is large, the transportation loss can also be reduced. We use stability analysis to reveal how the system exhibits various topologies depending on the parameter.

  20. Transportation network with fluctuating input/output designed by the bio-inspired Physarum algorithm.

    Directory of Open Access Journals (Sweden)

    Shin Watanabe

    Full Text Available In this paper, we propose designing transportation network topology and traffic distribution under fluctuating conditions using a bio-inspired algorithm. The algorithm is inspired by the adaptive behavior observed in an amoeba-like organism, plasmodial slime mold, more formally known as plasmodium of Physarum plycephalum. This organism forms a transportation network to distribute its protoplasm, the fluidic contents of its cell, throughout its large cell body. In this process, the diameter of the transportation tubes adapts to the flux of the protoplasm. The Physarum algorithm, which mimics this adaptive behavior, has been widely applied to complex problems, such as maze solving and designing the topology of railroad grids, under static conditions. However, in most situations, environmental conditions fluctuate; for example, in power grids, the consumption of electric power shows daily, weekly, and annual periodicity depending on the lifestyles or the business needs of the individual consumers. This paper studies the design of network topology and traffic distribution with oscillatory input and output traffic flows. The network topology proposed by the Physarum algorithm is controlled by a parameter of the adaptation process of the tubes. We observe various rich topologies such as complete mesh, partial mesh, Y-shaped, and V-shaped networks depending on this adaptation parameter and evaluate them on the basis of three performance functions: loss, cost, and vulnerability. Our results indicate that consideration of the oscillatory conditions and the phase-lags in the multiple outputs of the network is important: The building and/or maintenance cost of the network can be reduced by introducing the oscillating condition, and when the phase-lag among the outputs is large, the transportation loss can also be reduced. We use stability analysis to reveal how the system exhibits various topologies depending on the parameter.

  1. Extreme inputs/outputs for multiple input multiple output linear systems.

    Energy Technology Data Exchange (ETDEWEB)

    Smallwood, David Ora

    2005-09-01

    A linear structure is excited at multiple points with a stationary normal random process. The response of the structure is measured at multiple outputs. If the auto spectral densities of the inputs are specified, the phase relationships between the inputs are derived that will minimize or maximize the trace of the auto spectral density matrix of the outputs. If the autospectral densities of the outputs are specified, the phase relationships between the outputs that will minimize or maximize the trace of the input auto spectral density matrix are derived. It is shown that other phase relationships and ordinary coherence less than one will result in a trace intermediate between these extremes. Least favorable response and some classes of critical response are special cases of the development. It is shown that the derivation for stationary random waveforms can also be applied to nonstationary random, transients, and deterministic waveforms.

  2. A trade balance

    DEFF Research Database (Denmark)

    Daugbjerg, Carsten; Kay, Adrian

    2014-01-01

    The establishment of the World Trade Organization (WTO) has been widely accepted as representing the legalisation of world trading rules. However, it is important to reflect on the limits of this legalisation thesis in terms of the interface between international and domestic policy processes...... disputes—the US upland cotton and European Union sugar cases—serve to suggest that the authority of international trade law is not as significant as assumed by the legalisation thesis. Rather, domestic politics and institutions have an important impact on the outcome of trade disputes........ By locating trading disputes in a political analysis of policy implementation, it is argued that it is difficult to establish conceptually how the WTO dispute settlement system could have authority separate from and above the conventional international politics of trade policy relations. Instead, the article...

  3. BP's emissions trading system

    International Nuclear Information System (INIS)

    Victor, David G.; House, Joshua C.

    2006-01-01

    Between 1998 and 2001, BP reduced its emissions of greenhouse gases by more than 10%. BP's success in cutting emissions is often equated with its use of an apparently market-based emissions trading program. However no independent study has ever examined the rules and operation of BP's system and the incentives acting on managers to reduce emissions. We use interviews with key managers and with traders in several critical business units to explore the bound of BP's success with emissions trading. No money actually changed hands when permits were traded, and the main effect of the program was to create awareness of money-saving emission controls rather than strong price incentives. We show that the trading system did not operate like a 'textbook' cap and trade scheme. Rather, the BP system operated much like a 'safety valve' trading system, where managers let the market function until the cost of doing so surpassed what the company was willing to tolerate

  4. WORLD GRAIN TRADE

    Directory of Open Access Journals (Sweden)

    Emilia Mary Bălan

    2017-04-01

    Full Text Available Grain is part of agricultural commodities and is of utmost importance for world agriculture,since it is the essential element of food and animal feed. Against this background, grain trade among countries of the world is dynamic and represents about 10% of global trade in food products.This article examines global grain trade both in terms of quantitative and qualitative developments, and highlights the most important competitor countries in this sector. It also details the patterns of grain trade for the world's main exporters and importers of such commodities.Two distinct sections of the research relate to the evolution of the primary grain quotations(wheat, corn, barley, rice and sorghum at the most representative international agricultural commodities markets (Chicago Board of Trade, based on a comprehensive statistical analysis, and the short-term forecasts for global grain trade, respectively.

  5. Embodied carbon dioxide flow in international trade: A comparative analysis based on China and Japan.

    Science.gov (United States)

    Long, Ruyin; Li, Jinqiu; Chen, Hong; Zhang, Linling; Li, Qianwen

    2018-03-01

    Carbon dioxide embodied flow in international trade has become an important factor in defining global carbon emission responsibility and climate policy. We conducted an empirical analysis for China and Japan for the years 2000-2014, using a multi-region input-output model and considering the rest of the world as a comparison group. We compared the two countries' direct and complete carbon dioxide emissions intensity and bilateral economic activities such as imports and exports, production and consumption to analyze the difference between China and Japan. The results showed that the intensities of carbon emissions in all sectors of China were higher than that in Japan and that China's annual production-based emissions were greater than consumption-based emissions, the opposite of these relationships in Japan. China was a typical net carbon export country, and carbon embodied in its imports and exports continued to increase throughout the study period. In contrast, Japan's volume and growth rate of embodied carbon emissions were far less than China's and Japan was a typical net carbon import country. Finally, the conclusions of this study support recommendations for the formulation of international carbon emission responsibility allocation, domestic abatement policy as well as China's trade policy. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Computable general equilibrium modelling in the context of trade and environmental policy

    International Nuclear Information System (INIS)

    Koesler, Simon Tobias

    2014-01-01

    This thesis is dedicated to the evaluation of environmental policies in the context of climate change. Its objectives are twofold. Its first part is devoted to the development of potent instruments for quantitative impact analysis of environmental policy. In this context, the main contributions include the development of a new computable general equilibrium (CGE) model which makes use of the new comprehensive and coherent World Input-Output Dataset (WIOD) and which features a detailed representation of bilateral and bisectoral trade flows. Moreover it features an investigation of input substitutability to provide modellers with adequate estimates for key elasticities as well as a discussion and amelioration of the standard base year calibration procedure of most CGE models. Building on these tools, the second part applies the improved modelling framework and studies the economic implications of environmental policy. This includes an analysis of so called rebound effects, which are triggered by energy efficiency improvements and reduce their net benefit, an investigation of how firms restructure their production processes in the presence of carbon pricing mechanisms, and an analysis of a regional maritime emission trading scheme as one of the possible options to reduce emissions of international shipping in the EU context.

  7. A Study on Trade Interdependence between Korea, China, Japan, the US

    Directory of Open Access Journals (Sweden)

    Kyu-in Lee

    2006-12-01

    Full Text Available Using an international input-output table, our study analyzes the interdependence among four countries (i.e. Korea, China, Japan and the US using empirical trade and industry data. While both China and Korea exhibit high backward linkage effects, China's - as well as Japan's - forward linkage effects are still higher than Korea's. These results imply that interdependence among the three countries in Northeast Asia is increasing. Moreover, Korea and China's dependence on Japan and the US has been augmented, whereby economic cooperation is increasingly rising among the three Northeast Asian countries (Korea, China and Japan realizing each country's comparative advantages. However, these countries need to prepare themselves for long-term negative aspects of closer cooperation, especially the negative impact of economic fluctuations in counterpart countries. In this context, Korea and China need to concentrate development of three key industries: the materials industry, parts industry, and high-technology industry. Furthermore, these countries need to establish an independent industrial system by diversifying trading partners, develop the service industry to support the manufacturing industry, and stimulate domestic demand. Finally, a sound economy structure needs to be established through improvement of productivity.

  8. Trade and Development

    DEFF Research Database (Denmark)

    Abbott, Philip; Bentzen, Jeanet Sinding; Tarp, Finn

    2009-01-01

    History, not predictions of CGE models or cross-country growth studies, shows a strong relationship between trade and development. Vietnam’s experience with bilateral trade agreements, comparing actual outcomes with predictions from existing models, demonstrates this and the limitations of research...... methodologies. Forecasts for Vietnam greatly underestimated the impact of past agreements because tariff reform was not the main factor driving adjustments. Addressing market imperfections through institutional reform was central to bringing output and trade expansion. Key questions for future research...

  9. Potential Impact of TPP Trade Agreement on US Bilateral Agricultural Trade: Trade Creation or Trade Diversion?

    OpenAIRE

    Yeboah, Osei Agyeman; Shaik, Saleem; Agyekum, Afia Fosua

    2015-01-01

    Trans-Pacific Partnership (TPP) trade agreement is a trade agreement U.S is negotiating with 11 other countries in the Asia-Pacific region (Australia, Brunei Darussalam, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, and Vietnam) to reduce or eliminate tariffs on U.S. products exported to the TPP countries. With TPP, U.S expects to expand its trade with members of the partnership; resulting in GDP growth. However, there exist large concerns about the potential negative ...

  10. International trade and inequality

    OpenAIRE

    Urata, Sh¯ujir¯o; Narjoko, Dionisius A.

    2017-01-01

    The impact of globalization on equality has become a serious concern for many countries. More evidence that challenges the theoretical prediction of positive impact of international trade on income distribution has increasingly become available recently. This paper addresses this subject, surveying the empirical findings on the impact of international trade on inequalities from various perspectives. The survey reveals that an increase in trade openness by developing countries appears to have ...

  11. Globalization, trade and business

    OpenAIRE

    Boskov, Tatjana; Lazaroski, Spire

    2011-01-01

    Globalization refers to the growing interdependence of countries resulting from the increasing integration of trade, finance, people, and ideas in one global marketplace. International trade and cross-border investment flows are the main elements of this global integration. Trade freedom is the best economic strategy for all of the world’s peoples. No single nation has the natural resources, infrastructure, and human capital in sufficient quantity and quality to realize the standard of liv...

  12. International emissions trading

    DEFF Research Database (Denmark)

    Boom, Jan Tjeerd

    This thesis discusses the design and political acceptability of international emissions trading. It is shown that there are several designs options for emissions trading at the national level that have a different impact on output and thereby related factors such as employment and consumer prices....... The differences in impact of the design make that governments may prefer different designs of emissions trading in different situations. The thesis furthermore establishes that international emissions trading may lead to higher overall emissions, which may make it a less attractive instrument....

  13. Trade in health services.

    Science.gov (United States)

    Chanda, Rupa

    2002-01-01

    In light of the increasing globalization of the health sector, this article examines ways in which health services can be traded, using the mode-wise characterization of trade defined in the General Agreement on Trade in Services. The trade modes include cross- border delivery of health services via physical and electronic means, and cross-border movement of consumers, professionals, and capital. An examination of the positive and negative implications of trade in health services for equity, efficiency, quality, and access to health care indicates that health services trade has brought mixed benefits and that there is a clear role for policy measures to mitigate the adverse consequences and facilitate the gains. Some policy measures and priority areas for action are outlined, including steps to address the "brain drain"; increasing investment in the health sector and prioritizing this investment better; and promoting linkages between private and public health care services to ensure equity. Data collection, measures, and studies on health services trade all need to be improved, to assess better the magnitude and potential implications of this trade. In this context, the potential costs and benefits of trade in health services are shaped by the underlying structural conditions and existing regulatory, policy, and infrastructure in the health sector. Thus, appropriate policies and safeguard measures are required to take advantage of globalization in health services. PMID:11953795

  14. Reirradiation With Cetuximab in Locoregional Recurrent and Inoperable Squamous Cell Carcinoma of the Head and Neck: Feasibility and First Efficacy Results

    Energy Technology Data Exchange (ETDEWEB)

    Balermpas, Panagiotis; Keller, Christian [Department of Radiation Therapy and Oncology, Goethe University, Frankfurt am Main (Germany); Hambek, Markus; Wagenblast, Jens [Department of Otorhinolaryngology, Goethe University, Frankfurt am Main (Germany); Seitz, Oliver [Department of Oral Maxillofacial and Plastic Facial Surgery, Goethe University, Frankfurt am Main (Germany); Roedel, Claus [Department of Radiation Therapy and Oncology, Goethe University, Frankfurt am Main (Germany); Weiss, Christian, E-mail: christian.weiss@kgu.de [Department of Radiation Therapy and Oncology, Goethe University, Frankfurt am Main (Germany)

    2012-07-01

    Purpose: To report our experience with a prospective protocol of external beam reirradiation (Re-RT) combined with cetuximab for patients with inoperable, recurrent squamous cell carcinoma of the head and neck (SCCHN). Patients and Methods: Between August 2008 and June 2010, 18 patients with inoperable recurrence of SCCHN after adjuvant or definitive radiotherapy (RT) and simultaneous or sequential cisplatin-based chemotherapy for primary SCCHN were enrolled. Acute and late toxicity from the experimental regimen were recorded every week during RT and every 3 months thereafter. Efficacy was assessed with repeated imaging using response evaluation criteria in solid tumors and clinical examinations 8-12 weeks after completion of the treatment and every 3 months thereafter. Results: Median follow-up time for all patients was 9.4 (range: 3.85-31.7) months and for patients alive 30.4 (range: 15.7-31.7) months. Acute toxicity was generally mild or moderate. Five patients developed a grade 3 acneiform rash related to cetuximab. Late toxicity occurred as grade 3 trismus in five and as grade 3 abacterial salivary gland inflammation in one patient, respectively. Overall response rate was 47%. Median overall and progression-free survival for all patients was 8.38 months and 7.33 months, respectively. The overall survival rate was 44% at 1 year, with a 1 year local control rate of 33%. Conclusion: Notwithstanding the limitations of our preliminary data Re-RT combined with cetuximab for recurrent and inoperable SCCHN is feasible and the integration of newer targeted agents seems to be less toxic compared to conventional chemotherapy with encouraging response rates at least for a subset of patients.

  15. Reirradiation With Cetuximab in Locoregional Recurrent and Inoperable Squamous Cell Carcinoma of the Head and Neck: Feasibility and First Efficacy Results

    International Nuclear Information System (INIS)

    Balermpas, Panagiotis; Keller, Christian; Hambek, Markus; Wagenblast, Jens; Seitz, Oliver; Rödel, Claus; Weiss, Christian

    2012-01-01

    Purpose: To report our experience with a prospective protocol of external beam reirradiation (Re-RT) combined with cetuximab for patients with inoperable, recurrent squamous cell carcinoma of the head and neck (SCCHN). Patients and Methods: Between August 2008 and June 2010, 18 patients with inoperable recurrence of SCCHN after adjuvant or definitive radiotherapy (RT) and simultaneous or sequential cisplatin-based chemotherapy for primary SCCHN were enrolled. Acute and late toxicity from the experimental regimen were recorded every week during RT and every 3 months thereafter. Efficacy was assessed with repeated imaging using response evaluation criteria in solid tumors and clinical examinations 8–12 weeks after completion of the treatment and every 3 months thereafter. Results: Median follow-up time for all patients was 9.4 (range: 3.85–31.7) months and for patients alive 30.4 (range: 15.7–31.7) months. Acute toxicity was generally mild or moderate. Five patients developed a grade 3 acneiform rash related to cetuximab. Late toxicity occurred as grade 3 trismus in five and as grade 3 abacterial salivary gland inflammation in one patient, respectively. Overall response rate was 47%. Median overall and progression-free survival for all patients was 8.38 months and 7.33 months, respectively. The overall survival rate was 44% at 1 year, with a 1 year local control rate of 33%. Conclusion: Notwithstanding the limitations of our preliminary data Re-RT combined with cetuximab for recurrent and inoperable SCCHN is feasible and the integration of newer targeted agents seems to be less toxic compared to conventional chemotherapy with encouraging response rates at least for a subset of patients.

  16. Dosimetric feasibility of stereotactic body radiation therapy as an alternative to brachytherapy for definitive treatment of medically inoperable early stage endometrial cancer

    International Nuclear Information System (INIS)

    Jones, Ryan; Chen, Quan; Best, Ryan; Libby, Bruce; Crandley, Edwin F; Showalter, Timothy N

    2014-01-01

    This study was designed to evaluate the dosimetric feasibility of definitive stereotactic body radiation therapy (SBRT) for the treatment of medically inoperable early stage endometrial cancer. CT simulation scans from 10 medically inoperable early stage endometrial cancer patients previously treated with high dose-rate (HDR) intracavitary brachytherapy were used to generate Helical Tomotherapy (HT) plans using the IMRT mode with clinical target volumes (CTVs) that included the uterus plus cervix. A prescription dose of 34 Gy in 4 fractions was used. The SBRT dosimetry was compared to the 10 prior intracavitary brachytherapy plans normalized to a standard dose. Organs at risk (OARs) evaluated were the bladder, rectum, sigmoid, femoral heads, and other bowel, including both large and small bowel. The simulation CT and daily image guidance for 4 patients treated with this technique were evaluated to assess for interfraction variation in the uterine position and effects on dosimetry. Compared to intracavitary brachytherapy, HT SBRT produced significantly greater overall target coverage to the uterus, boost CTV, and PTV, with exception of the V150% of the uterus. HT SBRT significantly increased dose to the rectum, bowel, and femoral heads compared to intracavitary brachytherapy, though not outside of dose tolerance limits. Review of daily image guidance for patients treated with this technique demonstrated good reproducibility with a mean overlap index of 0.87 (range, 0.74 – 0.99). Definitive SBRT for medically inoperable early stage endometrial cancer appears to be a feasible treatment option. Future studies are warranted to evaluate long-term clinical outcomes with this technique, compared to HDR intracavitary brachytherapy

  17. [High-intensity focused ultrasound (HIFU) for tumor pain relief in inoperable pancreatic cancer : Evaluation with the pain sensation scale (SES)].

    Science.gov (United States)

    Marinova, M; Strunk, H M; Rauch, M; Henseler, J; Clarens, T; Brüx, L; Dolscheid-Pommerich, R; Conrad, R; Cuhls, H; Radbruch, L; Schild, H H; Mücke, M

    2017-02-01

    High-intensity focused ultrasound (HIFU) in combination with palliative standard therapy is an innovative and effective treatment option for pain reduction in patients with inoperable pancreatic cancer. Evaluation of the effects of additive ultrasound (US)-guided HIFU treatment in inoperable pancreatic cancer on the sensory and affective pain perception using validated questionnaries. In this study 20 patients with locally advanced inoperable pancreatic cancer and tumor-related pain were treated by US-guided HIFU (6 stage III, 12 stage IV according to UICC and 2 with local recurrence after surgery). Ablation was performed using the JC HIFU system (HAIFU, Chongqing, China) with an ultrasonic device for real-time imaging. Clinical assessment included evaluation of pain severity using validated questionnaires with particular attention to the pain sensation scale (SES) with its affective and sensory component and the numeric rating scale (NRS). The average pain reduction after HIFU was 2.87 points on the NRS scale and 57.3 % compared to the mean baseline score (n = 15, 75 %) in 19 of 20 treated patients. Four patients did not report pain relief, however, the previous opioid medication could be stopped (n = 2) or the analgesic dosage could be reduced (n = 2). No pain reduction was achieved in one patient. Furthermore, after HIFU emotional as well as sensory pain aspects were significantly reduced (before vs. 1 week after HIFU, p pain scales). US-guided HIFU can be used for effective and early pain relief and reduction of emotional and sensory pain sensation in patients with locally advanced pancreatic cancer.

  18. Induction Chemotherapy and Continuous Hyperfractionated Accelerated Radiotherapy (CHART) for Patients With Locally Advanced Inoperable Non-Small-Cell Lung Cancer: The MRC INCH Randomized Trial

    International Nuclear Information System (INIS)

    Hatton, Matthew; Nankivell, Matthew; Lyn, Ethan; Falk, Stephen; Pugh, Cheryl; Navani, Neal; Stephens, Richard; Parmar, Mahesh

    2011-01-01

    Purpose: Recent clinical trials and meta-analyses have shown that both CHART (continuous hyperfractionated accelerated radiation therapy) and induction chemotherapy offer a survival advantage over conventional radical radiotherapy for patients with inoperable non-small cell-lung cancer (NSCLC). This multicenter randomized controlled trial (INCH) was set up to assess the value of giving induction chemotherapy before CHART. Methods and Materials: Patients with histologically confirmed, inoperable, Stage I-III NSCLC were randomized to induction chemotherapy (ICT) (three cycles of cisplatin-based chemotherapy followed by CHART) or CHART alone. Results: Forty-six patients were randomized (23 in each treatment arm) from 9 UK centers. As a result of poor accrual, the trial was closed in December 2007. Twenty-eight patients were male, 28 had squamous cell histology, 34 were Stage IIIA or IIIB, and all baseline characteristics were well balanced between the two treatment arms. Seventeen (74%) of the 23 ICT patients completed the three cycles of chemotherapy. All 42 (22 CHART + 20 ICT) patients who received CHART completed the prescribed treatment. Median survival was 17 months in the CHART arm and 25 months in the ICT arm (hazard ratio of 0.60 [95% CI 0.31-1.16], p = 0.127). Grade 3 or 4 adverse events (mainly fatigue, dysphagia, breathlessness, and anorexia) were reported for 13 (57%) CHART and 13 (65%) ICT patients. Conclusions: This small randomized trial indicates that ICT followed by CHART is feasible and well tolerated. Despite closing early because of poor accrual, and so failing to show clear evidence of a survival benefit for the additional chemotherapy, the results suggest that CHART, and ICT before CHART, remain important options for the treatment of inoperable NSCLC and deserve further study.

  19. Stereotactic body radiotherapy and treatment at a high volume facility is associated with improved survival in patients with inoperable stage I non-small cell lung cancer

    International Nuclear Information System (INIS)

    Koshy, Matthew; Malik, Renuka; Mahmood, Usama; Husain, Zain; Sher, David J.

    2015-01-01

    Background: This study examined the comparative effectiveness of no treatment (NoTx), conventional fractionated radiotherapy (ConvRT), and stereotactic body radiotherapy (SBRT) in patients with inoperable stage I non-small cell lung cancer. This population based cohort also allowed us to examine what facility level characteristics contributed to improved outcomes. Methods: We included patients in the National Cancer Database from 2003 to 2006 with T1-T2N0M0 inoperable lung cancer (n = 13,036). Overall survival (OS) was estimated using Kaplan–Meier methods and Cox proportional hazard regression. Results: The median follow up was 68 months (interquartile range: 35–83 months) in surviving patients. Among the cohort, 52% received NoTx, 41% received ConvRT and 6% received SBRT. The 3-year OS was 28% for NoTx, 36% for ConvRT radiotherapy, and 48% for the SBRT cohort (p < 0.0001). On multivariate analysis, the hazard ratio for SBRT and ConvRT were 0.67 and 0.77, respectively, as compared to NoTx (1.0 ref) (p < 0.0001). Patients treated at a high volume facility vs. low volume facility had a hazard ratio of 0.94 vs. 1.0 (p = 0.01). Conclusions: Patients with early stage inoperable lung cancer treated with SBRT and at a high volume facility had a survival benefit compared to patients treated with ConvRT or NoTx or to those treated at a low volume facility

  20. INDONESIAN TRADE UNDER CHINA FREE TRADE AREA

    Directory of Open Access Journals (Sweden)

    Tavi Supriana

    2011-09-01

    Full Text Available This paper investigates the implementation of CAFTA (China-Asean Free Trade Area on the international trade flows across Indonesia, China and the rest of ASEAN using a gravitation model. It finds the evidence that the influence of diversion and creation effects on China are significant, while the influence of both effects on Indonesia are not significant. It also finds that the diversion effect, which leads to a decrease in society’s wealth, is greater than that of the creation effect. As a consequence, the gap across countries involved in the trade agreement is wider. Keywords: CAFTA, gravitation model, diversion effect, creation effectJEL classification numbers: F13, F14, F15