WorldWideScience

Sample records for trade in-pile source

  1. Interpretation of the TRADE In-Pile source multiplication experiments

    International Nuclear Information System (INIS)

    Mercatali, Luigi; Carta, Mario; Peluso, Vincenzo

    2006-01-01

    Within the framework of the neutronic characterization of the TRIGA RC-1 reactor in support to the TRADE (TRiga Accelerator Driven Experiment) program, the interpretation of the subcriticality level measurements performed in static regime during the TRADE In-Pile experimental program is presented. Different levels of subcriticality have been measured using the MSA (Modified Source Approximated) method by the insertion of a standard fixed radioactive source into different core positions. Starting from a reference configuration, fuel elements were removed: control rods were moved outward as required for the coupling experiments envisioned with the proton accelerator and fission chambers were inserted in order to measure subcritical count rates. A neutron-physics analysis based on the modified formulation of the source multiplication method (MSM) has been carried out, which requires the systematic solution for each experimental configuration of the homogeneous, both in the forward and adjoint forms, and inhomogeneous Boltzmann equations. By means of such a methodology calculated correction factors to be applied to the MSA measured reactivities were produced in order to take into account spatial and energetic effects creating changes in the detector efficiencies and effective source with respect to the calibration configuration. The methodology presented has been tested against a large number of experimental states. The measurements have underlined the sensitivity of the MSA measured reactivities to core geometry changes and control rod perturbations; the efficiency of MSM factors to dramatically correct for this sensitivity is underlined, making of this technique a relevant methodology in view of the incoming US RACE program to be performed in TRIGA reactors

  2. In-Pile 4He Source for UCN Production at the ESS

    International Nuclear Information System (INIS)

    Zanini, Luca; Batkov, Konstantin; Takibayev, Alan; Mezei, Ferenc; Klinkby, Esben; Schönfeldt, Troels; Pitcher, Eric

    2014-01-01

    ESS will be a premier neutron source facility. Unprecedented neutron beam intensities are ensured by spallation reactions of a 5 MW, 2.0 GeV proton beam impinging on a tungsten target equipped with advanced moderators. The work presented here aims at investigating possibilities for installing an ultra cold neutron (UCN) source at the ESS. One consequence of using the recently proposed flat moderators is that they take up less space than the moderators originally foreseen and thus leave more freedom to design a UCN source, close to the spallation hotspot. One of the options studied is to place a large 4 He UCN source in a through-going tube which penetrates the shielding below the target. First calculations of neutron flux available for UCN production are given, along with heat-load estimates. It is estimated that the flux can give rise to a UCN production at a rate of up to 1.5·10 8 UCN/s. A production in this range potentially allows for a number of UCN experiments to be carried out at unprecedented precision, including, for example, quantum gravitational spectroscopy with UCNs which rely on high phase-space density

  3. Determination of delayed neutrons source in the frequency domain based on in-pile oscillation measurements

    International Nuclear Information System (INIS)

    Yedvab, Y.; Reiss, I.; Bettan, M.; Harari, R.; Grober, A.; Ettedgui, H.; Caspi, E. N.

    2006-01-01

    A method for determining delayed neutrons source in the frequency domain based on measuring power oscillations in a non-critical reactor is presented. This method is unique in the sense that the delayed neutrons source is derived from the dynamic behavior of the reactor, which serves as the measurement system. An algorithm for analyzing power oscillation measurements was formulated, which avoids the need for a multi-parameter non-linear fit process used by other methods. Using this algorithm results of two sets of measurements performed in IRR-I and IRR-II (Israeli Research Reactors I and II) are presented. The agreement between measured values from both reactors and calculated values based on Keepin (and JENDL-3.3) group parameters is very good. (authors)

  4. NONPOINT SOURCES AND WATER QUALITY TRADING

    Science.gov (United States)

    Management of nonpoint sources (NPS) of nutrients may reduce discharge levels more cost effectively than can additional controls on point sources (PS); water quality trading (WQT), where a PS buys nutrient or sediment reductions from an NPS, may be an alternative means for the PS...

  5. Trade and transport of radiation sources

    International Nuclear Information System (INIS)

    1996-01-01

    The guide specifies the obligations pertaining to the trade in and transport of radiation sources and other matters to be taken into account in safety supervision. It also specifies obligations and procedures relating to transfrontier movements of radioactive waste contained in the EU Council Directive 92/3/Euratom. (7 refs.)

  6. Information, Overconfidence and Trading: Do the Sources of Information Matter?

    OpenAIRE

    Margarida Abreu; Victor Mendes

    2011-01-01

    We investigate how the strength of the positive association between frequency of trading and information acquisition is dependent on investors’ self‐confidence and on the sources of information used by investors. Our results confirm that the more frequently individual investors invest in information, the more they trade in financial products. Our results also confirm previous findings that overconfident investors, who show a better than average bias, trade more frequently. In this paper, we a...

  7. Firm Heterogeneity and the Two Sources of Gains from Trade

    OpenAIRE

    AGUR, Itai

    2006-01-01

    Recent empirical work identies two main channels through which consumers benefit from trade. Trade liberalization lowers prices, while it raises product variety. This paper develops the first model that connects both channels and interprets their interaction. It shows that heterogeneity in firm productivity is the source behind both. Upon liberalization efficient exporters enter, pushing out the least efficient domestic firms. Two countervailing forces emerge, both stylized fac...

  8. Radioactive sources in trade and industry

    International Nuclear Information System (INIS)

    Vroom, H.; Bolt, R.; Lange, H. de.

    1989-04-01

    An inventory has been drawn up of the most important applications of radioactive sources in the Netherlands, with emphasis on nuclear measuring instruments for industrial use. This inventory has been supplemented with a brief survey of the most important legal demand (among which, the 'decree radiation protection') with regard to the use of such instruments and some data about the construction of the radioactive source present in the instrument. Also the processing of exhausted sources is discussed briefly. (author). 14 refs.; 3 figs.; 6 tabs

  9. Trade, Industry Structure and Different Sources of Firm-heterogeneity

    DEFF Research Database (Denmark)

    Schröder, Philipp J.H.; Jørgensen, Jan Guldager

    Recently the workhorse model of intra-industry trade has been augmented with heterogeneous cost structures at the firm level. In principle there exist various sources of heterogeneity, yet the literature appears -- for convenience or other reasons -- to settle on marginal cost heterogeneity...... as the preferred modelling device. The present paper develops a unified model framework allowing a systematic comparison of marginal and fixed cost heterogeneity. We find that both types of heterogeneity are in fact able to capture the central stylized facts of international trade. For example can either source...

  10. In-pile Instrumentation Development

    International Nuclear Information System (INIS)

    Vermeeren, L.

    2005-01-01

    Advanced irradiations in research reactors require the on-line monitoring of crucial parameters like neutron fluxes, gamma dose rates, central fuel rod temperatures, fission gas release pressures and small geometry changes. Our activities in this field aim at a detailed understanding of the sensor behaviour in the irradiation conditions in order to extract reliable real-time information. The objectives of work performed by SCK-CEN are to study of the on-line in-pile measurement of gamma and neutron fluxes in real time and to investigate parasitic radiation-induced signals in instrumentation cables

  11. An evaluation of the use of mobile source emissions trading: Locomotive case study

    International Nuclear Information System (INIS)

    West, W.R.; Brazell, M.M.

    1993-01-01

    There are many proposals for generating mobil source credits for use by stationary and other sources. This paper examines the benefits and practicality of including locomotive rail emissions in proposed emissions trading programs in california. In particular, this paper examines (1) if trading of locomotive rail emissions will result in lower compliance costs for railroads than traditional open-quotes command and controlclose quotes approaches, and (2) if emissions trading programs provide large enough incentives to entice railroads to seek to meet or exceed expected emissions reduction open-quotes command and controlclose quotes targets. The paper also examines under what circumstances stationary sources would be willing to purchase mobile source credits from railroads, in order to offset some of the stationary source's emissions reductions requirements. Stated simply, this analysis examines whether proposed trading programs offer enough benefits to both trading partners to warrant their use

  12. Development of In-pile Plug Assembly and Primary Shutter for Cold Neutron Guide System

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jin Won; Cho, Yeong Garp; Ryu, Jeong Soo; Lee, Jung Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-12-15

    The HANARO, a 30 MW multi-purpose research reactor in Korea, will be equipped with a neutron guide system, in order to transport cold neutrons from the neutron source to the neutron scattering instruments in the neutron guide hall near the reactor building. The neutron guide system of HANARO consists of the in-pile plug assembly with in-pile guides, the primary shutter with in-shutter guides, the neutron guides in the guide shielding room with dedicated secondary shutters, and the neutron guides connected to the instruments in the neutron guide hall. The functions of the in-pile plug assembly are to shield the reactor environment from a nuclear radiation and to support the neutron guides and maintain them precisely oriented. The primary shutter is a mechanical device to be installed just after the in-pile plug assembly, which stops neutron flux on demand. This report describes the mechanical design, fabrication, and installation procedure of the in-pile plug assembly and the primary shutter for the neutron guide system at HANARO. A special tool and procedure for a replacement of in-pile plug and guide cassette is also presented with the interface condition in the reactor hall.

  13. Introducing nonpoint source transferable quotas in nitrogen trading: The effects of transaction costs and uncertainty.

    Science.gov (United States)

    Zhou, Xiuru; Ye, Weili; Zhang, Bing

    2016-03-01

    Transaction costs and uncertainty are considered to be significant obstacles in the emissions trading market, especially for including nonpoint source in water quality trading. This study develops a nonlinear programming model to simulate how uncertainty and transaction costs affect the performance of point/nonpoint source (PS/NPS) water quality trading in the Lake Tai watershed, China. The results demonstrate that PS/NPS water quality trading is a highly cost-effective instrument for emissions abatement in the Lake Tai watershed, which can save 89.33% on pollution abatement costs compared to trading only between nonpoint sources. However, uncertainty can significantly reduce the cost-effectiveness by reducing trading volume. In addition, transaction costs from bargaining and decision making raise total pollution abatement costs directly and cause the offset system to deviate from the optimal state. While proper investment in monitoring and measuring of nonpoint emissions can decrease uncertainty and save on the total abatement costs. Finally, we show that the dispersed ownership of China's farmland will bring high uncertainty and transaction costs into the PS/NPS offset system, even if the pollution abatement cost is lower than for point sources. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. In pile helium loop ''Comedie''

    International Nuclear Information System (INIS)

    Blanchard, R.J.

    1985-01-01

    The loop is located in the SILOE reactor at Centre d'Etudes Nucleaires de Grenoble. The purpose and objectives are divided into two groups, principal and secondary. The primary objective was to provide basic data on the deposition behavior of important condensable fission products on a variety of steel surfaces, i.e. temperature (sorption isotherms) and mass transfer (physical adsorption) dependencies; to provide information concerning the degree of penetration of important fission products into the metals comprising the heat exchanger-recuperator tubes as a function of alloy type and/or metal temperature; to provide complementary information on the reentrainment (liftoff) of important fission and activation products by performing out-of-pile blowdown experiments on tube samples representative of the alloy types used in the heat exchanger-recuperator and of the surface temperatures experienced during plateout. The secondary objective was to provide information concerning the migration of important fission products through graphite. To this end, concentration profiles in the web between the fuel rods containing the fission product source and the coolant channels and in the graphite diffusion sample will be measured to study the corrosion of metallic specimens placed in the conditions of high temperature gas cooled reactor. The first experiment SRO enables to determine the loop characteristics and possibilities related to thermal, thermodynamic, chemical and neutronic properties. The second experiment has been carried out in high temperature gas cooled reactor operating conditions. It enables to determine in particular the deposition axial profile of activation and fission products in the plateout section constituting the heat exchanger, the fission products balance trapped in the different filter components, and the cumulated released fraction of solid fission products. The SR1 test permits to demonstrate in particular the Comedie loop operation reliability, either

  15. Tools for Trade Analysis and Open Source Information Monitoring for Non-proliferation

    International Nuclear Information System (INIS)

    Cojazzi, G.G.M.; Versino, C.; Wolfart, E.; Renda, G.; Janssens, W.A.M.; )

    2015-01-01

    The new state level approach being proposed by IAEA envisions an objective based and information driven safeguards approach utilizing all relevant information to improve the effectiveness and efficiency of safeguards. To this goal the IAEA makes also use of open source information, here broadly defined as any information that is neither classified nor proprietary. It includes, but is not limited to: media sources, government and non-governmental reports and analyzes, commercial data, and scientific/technical literature, including trade data. Within the EC support programme to IAEA, JRC has surveyed and catalogued open sources on import-export customs trade data and developed tools for supporting the use of the related databases in safeguards. The JRC software The Big Table, (TBT), supports i.a.: a) the search through a collection of reference documents relevant to trade analysis (legal/regulatory documents, technical handbooks); b) the selection of items of interests to specific verifications and c) the mapping of these items to customs commodities searchable in trade databases. In the field of open source monitoring, JRC is developing and operating a ''Nuclear Security Media Monitor'' (NSMM), which is a web-based multilingual news aggregation system that automatically collects news articles from pre-defined web sites. NSMM is a domain specific version of the general JRC-Europe Media Monitor (EMM). NSMM has been established within the EC support programme with the aim, i.e., to streamline IAEA's process of open source information monitoring. In the first part, the paper will recall the trade data sources relevant for non-proliferation and will then illustrate the main features of TBT, recently coupled with the IAEA Physical Model, and new visualization techniques applied to trade data. In the second part it will present the main aspects of the NSMM also by illustrating some of uses done at JRC. (author)

  16. Watershed-based point sources permitting strategy and dynamic permit-trading analysis.

    Science.gov (United States)

    Ning, Shu-Kuang; Chang, Ni-Bin

    2007-09-01

    Permit-trading policy in a total maximum daily load (TMDL) program may provide an additional avenue to produce environmental benefit, which closely approximates what would be achieved through a command and control approach, with relatively lower costs. One of the important considerations that might affect the effective trading mechanism is to determine the dynamic transaction prices and trading ratios in response to seasonal changes of assimilative capacity in the river. Advanced studies associated with multi-temporal spatially varied trading ratios among point sources to manage water pollution hold considerable potential for industries and policy makers alike. This paper aims to present an integrated simulation and optimization analysis for generating spatially varied trading ratios and evaluating seasonal transaction prices accordingly. It is designed to configure a permit-trading structure basin-wide and provide decision makers with a wealth of cost-effective, technology-oriented, risk-informed, and community-based management strategies. The case study, seamlessly integrating a QUAL2E simulation model with an optimal waste load allocation (WLA) scheme in a designated TMDL study area, helps understand the complexity of varying environmental resources values over space and time. The pollutants of concern in this region, which are eligible for trading, mainly include both biochemical oxygen demand (BOD) and ammonia-nitrogen (NH3-N). The problem solution, as a consequence, suggests an array of waste load reduction targets in a well-defined WLA scheme and exhibits a dynamic permit-trading framework among different sub-watersheds in the study area. Research findings gained in this paper may extend to any transferable dynamic-discharge permit (TDDP) program worldwide.

  17. Visual in-pile fuel disruption experiments

    International Nuclear Information System (INIS)

    Cano, G.L.; Ostensen, R.W.; Young, M.F.

    1978-01-01

    In a loss-of-flow (LOF) accident in an LMFBR, the mode of disruption of fuel may determine the probability of a subsequent energetic excursion. To investigate these phenomena, in-pile disruption of fission-heated irradiated fuel pellets was recorded by high speed cinematography. Instead of fuel frothing or dust-cloud breakup (as used in the SAS code) massive and very rapid fuel swelling, not predicted by analytical models, occurred. These tests support massive fuel swelling as the initial mode of fuel disruption in a LOF accident. (author)

  18. Open Source and Trade Data for Non-Proliferation: Challenges and Opportunities

    International Nuclear Information System (INIS)

    Stewart, I.; Gillard, N.

    2015-01-01

    This paper explores what more systematic exploitation of trade data can contribute to the state evaluation process. The paper begins by setting out a typology of trade data, which groups the data into five categories: · Government Declared Data, which is prepared and submitted by States to an international authority for non-proliferation purposes. · Government Recorded Data, which includes information collected by the state for its own purposes, and which is not routinely submitted to international authorities for non-proliferation purposes. It includes (some) export licencing data, customs data, and business registration information. · Business-held data, which includes information on a company's own products and customers, but also ''market intelligence''. · Intelligence and Enforcement Derived Information, which can include information on specific procurement attempts, networks, or procurement requirements. · Procurement Requirements Information, which can include information released by a programme for the purpose of seeking goods or services. Challenges and opportunities related to further exploitation of trade data sources in each category are then explored, as are factors related to accessibility (both in terms of mandates and more practical considerations), reliability (including presentation of a typology), completeness, and duplication in data. Next, the paper explores how the IAEA can systematically collect, integrate and analyze the various sources of trade data given the considerations outlined above. In particular, this section focuses on how data in variable structures can be integrated into the state evaluation process. In concluding, the paper will describe how the newly formed ''Collaboration on Open Source and Trade Analysis for Non-proliferation'' (COSTA-NP) is seeking to develop each of the categories of trade data. The paper links to research objectives 1.3, 1.4, 2.1, 2.3, and 2.4 of the IAEA

  19. New trends in pile safety instrumentation

    International Nuclear Information System (INIS)

    Furet, J.

    1961-01-01

    This report addresses the protection of nuclear piles against damages due to operation incidents. The author discusses the current trends in the philosophy of safety of atomic power piles, identifies the parameters which define safety systems, presents tests to be performed on safety chains, comments the relationship between safety and the decrease of the number of pile inadvertent shutdowns, discusses the issues of instrument failures and chain multiplicity, comments the possible improvement of the operation of elements which build up safety chains (design simplification, development of semiconductors, replacement of electromechanical relays by static relays), the role of safety logical computers and the development of automatics in pile safety, presents automatic control as a safety factor (example of automatic start-up), and finally comments the use of fuses

  20. Cultures of Science and Technology in the Trading Zone: Biodiversity and Open Source Development

    OpenAIRE

    Heaton , Lorna; Dias da Silva , Patrícia

    2016-01-01

    International audience; This paper explores the work of building open source biodiversity information infrastructure. We analyse collaboration between a Canadian team and a Brazilian one. In particular we focus on the use of WingLongitude, a GitHub space, as a trading zone within which the two teams co-developed solutions. We show how the choice to work in a neutral space, belonging to everyone, and the use of display, representation and assemblage practices enabled sharing of some infrastruc...

  1. Chemical fingerprinting and source tracing of obsidian: the central Mediterranean trade in black gold.

    Science.gov (United States)

    Tykot, Robert H

    2002-08-01

    Chemical fingerprinting using major or trace element composition is used to characterize the Mediterranean island sources of obsidian and can even differentiate as many as nine flows in the Monte Arci region of Sardinia. Analysis of significant numbers of obsidian artifacts from Neolithic sites in the central Mediterranean reveals specific patterns of source exploitation and suggests particular trade mechanisms and routes. The use of techniques such as X-ray fluorescence, the electron microprobe, neutron activation analysis, and laser ablation ICP mass spectrometry are emphasized in order to produce quantitative results while minimizing damage to valuable artifacts.

  2. Minutes of the workshop on bases of in-pile irradiation tests

    International Nuclear Information System (INIS)

    1997-03-01

    The Workshop on Bases of In-pile Irradiation Tests was held on January 29th and 30th, 1997 at the Ibarakiken Sangyo Kaikan in Mito, Ibaraki. The purpose is to discuss upgrading an in-pile irradiation test, promoting the utilization of the research and testing reactors and also activating the research potential of JAERI transversely. Main topics are the role and future plan of the research and testing reactors, a challenge to an advanced irradiation test, development of peripheral techniques for irradiation tests and future trends of the in-pile irradiation test in the 21st century. It was mainly pointed out that the in-pile irradiation test based on an analytical method using interpolation and extrapolation procedures met a turning point and that the upgrading of the irradiation and testing method should be indispensable for regaining the latest frontiers of an irradiation study using the research and testing reactors. The new concepts were also proposed on the irradiation correlation and modeling for the design of innovative materials. It was also recognized the key issues of the irradiation study in future should be an advanced irradiation testing method which can combine various types of irradiation field and control the irradiation conditions freely. In the next century in which large accelerator or new neutron source competes with research and testing reactors for neutron irradiation tests, themes of research using in-pile irradiation tests will be upgrading of the light water reactor, development of fusion reactor, basic research, biological and medical research, radioisotope production and semiconductors manufacturing, etc. It was also concluded the research and testing reactors will keep their main role in neutron irradiation research in future. This report briefly summarizes the content of 16 presentations and the discussion. The result of the questionnaires on the utilization of research and testing reactors to the participants is also attached. (J.P.N.)

  3. Carbon trading and carbon taxation: how to consider biotic sources and sinks

    International Nuclear Information System (INIS)

    Madlener, Reinhard; Schlamadinger, Bernhard

    1999-01-01

    The Kyoto Protocol (KP) to the UNFCCC includes land-use change and forestry in the carbon accounting process, limited to afforestation, reforestation and deforestation since 1990, and explicitly provides for the option of using a variety of flexibility mechanisms to meet the greenhouse gas (GHG) reduction targets stipulated in a more cost-efficient manner. Domestically, different countries might adopt different approaches to achieve their emission reduction objectives, such as carbon trading or carbon taxation, and it is not clear to date what the implications for bioenergy use, forestry, and land-use change can be expected to be. With respect to national GHG emissions trading, the main issues studied in this paper are: Should trading of fossil fuel emissions allowances be coupled with trading of biotic credits and debits? Should credits for carbon sequestration in forests be auctioned or grandfathered? Should there be a distinction between a carbon permit issued for an additional biotic sink and those issued for fossil fuel carbon emissions? Is there a difference for biotic carbon sinks and sources between one-time permits and permits that allow a continued release of GHG over some pre-specified time? Should permits be issued only for the carbon-stock changes that count under the KP? With respect to national carbon taxation schemes, two questions are investigated: Should a tax credit be given for afforestation/reforestation (and a tax debit for deforestation)? Should tax credits also be given for projects that sequester carbon but do not count under the KP (such as forest protection rather than forest management)? For both schemes a crucial point is that by the formulation chosen in the KP two different classes of forest are created (i.e. those counted and those not counted under the KP), so that the implications for land prices might be significant. From a conceptual point of view this paper addresses the above-mentioned questions and contrasts some of the major

  4. Valuation of environmental and societal trade-offs of renewable energy sources

    International Nuclear Information System (INIS)

    Kosenius, Anna-Kaisa; Ollikainen, Markku

    2013-01-01

    Use of renewable energy sources is one solution to decrease green house gas emissions and the use of polluting fossil fuels. Renewables differ in their environmental and societal impacts, and to design sound renewable energy policy, societies need to assess the trade-offs between alternative sources. To enable the evaluation and comparison of renewable energy production alternatives in Finland, this paper applies the choice experiment to elicit the monetary information on people's preferences for four renewable energy sources: wind power, hydro power and energy from crops and wood, and considers four impacts of energy production: effects on biodiversity, local jobs, carbon emissions and household's electricity bill. The nested logit analysis reveals that higher income, male gender, young age, and pro-environmental attitude increase the probability to choose renewable energy instead of the current energy mix. Wind power is, on average, the most popular renewable energy technology, but regional differences exist. Biodiversity deterioration should be avoided. The national aggregate willingness to pay, based on stated preferences rather than preferences revealed by actual market behavior, for a combination of renewable energy technologies that corresponds to Finland's climate change and energy policy is over 500 million Euros. - Highlights: • Preferences for renewable energy sources are elicited with choice experiment. • Wind power is the most popular source in general. • Regional differences exist: energy from wood is favored in rural areas. • Biodiversity deterioration should be avoided

  5. An inexact fuzzy two-stage stochastic model for quantifying the efficiency of nonpoint source effluent trading under uncertainty

    International Nuclear Information System (INIS)

    Luo, B.; Maqsood, I.; Huang, G.H.; Yin, Y.Y.; Han, D.J.

    2005-01-01

    Reduction of nonpoint source (NPS) pollution from agricultural lands is a major concern in most countries. One method to reduce NPS pollution is through land retirement programs. This method, however, may result in enormous economic costs especially when large sums of croplands need to be retired. To reduce the cost, effluent trading can be employed to couple with land retirement programs. However, the trading efforts can also become inefficient due to various uncertainties existing in stochastic, interval, and fuzzy formats in agricultural systems. Thus, it is desired to develop improved methods to effectively quantify the efficiency of potential trading efforts by considering those uncertainties. In this respect, this paper presents an inexact fuzzy two-stage stochastic programming model to tackle such problems. The proposed model can facilitate decision-making to implement trading efforts for agricultural NPS pollution reduction through land retirement programs. The applicability of the model is demonstrated through a hypothetical effluent trading program within a subcatchment of the Lake Tai Basin in China. The study results indicate that the efficiency of the trading program is significantly influenced by precipitation amount, agricultural activities, and level of discharge limits of pollutants. The results also show that the trading program will be more effective for low precipitation years and with stricter discharge limits

  6. Gas reactor in-pile safety test project (GRIST-2)

    International Nuclear Information System (INIS)

    Kelley, A.P. Jr.; Arbtin, E.; St Pierre, R.

    1979-01-01

    Although out-of-pile tests may be expected to confirm individual phenomena models in core disruptive accident analysis codes, only in-pile tests are capable of verifying the extremely complex integrated model effects within the appropriate time phase for these accidents. For this reason, the GRIST-2 project, the purpose of which is to design and construct an in-pile helium loop capable of transient safety testing in the TREAT facility in Idaho, forms a cornerstone of the US GCFR safety program. The project organization, experiment program, facility, helium system design, and schedule which have been selected to meet the objectives are described

  7. Preliminary preview for a geographic and monitoring program project; a review of point source-nonpoint source effluent trading/offset systems in watersheds

    Science.gov (United States)

    Wood, Alexander Warren; Bernknopf, Richard L.

    2003-01-01

    Watershed-based trading and offset systems are being developed to improve policy-maker?s and regulator?s ability to assess nonpoint source impacts in watersheds and to evaluate the efficacy of using market-incentive programs for preserving environmental quality. An overview of the history of successful and failed trading programs throughout the United States suggests that certain political, economic, and scientific conditions within a temporal and spatial setting help meet water quality standards. The current lack of spontaneous trading among dischargers does not mean that a marketable permit trading system is an inherently inefficient regulatory approach. Rather, its infrequent use is the result of institutional and informational barriers. Improving and refining the earth science information and technologies may help determine whether trading is a suitable policy for improving water quality. However, it is debatable whether or not environmental information is the limiting factor. This paper reviews additional factors affecting the potential for instituting a trading policy. The motivation for investigating and reviewing the history of offsets and trading was inspired by a project in the preliminary stages being developed by U.S. Geological Survey Western Geographic Science Center and the Environmental Protection Agency Region IX. An offset feasibility study will be an integrated, map-based approach that incorporates environmental, economic, and statistical information to investigate the potential for using offsets to meet mercury Total Maximum Daily Loads in the Sacramento River watershed. A regional water-quality offset program is being studied that may help known point sources reduce mercury loading more cost effectively by the remediation of abandoned mines or other diffuse sources as opposed to more costly treatment at their own sites. An efficient offset program requires both a scientific basis and methods to translate that science into a regulatory decision

  8. Seismic analysis of the in-pile test section

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. M.; Park, K. N.; Chi, D. Y.; Park, S. K.; Sim, B. S.; Ahn, S. H.; Lee, C. Y.; Kim, Y. J. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2004-07-01

    This study gives the results of the seismic analysis of the IPS (In Pile Section) with lower bracket support. The results cover the natural frequency and seismic response of the IPS for the SSE and OBE events. An FE (Finite Element) model which includes the two vessels of the IPS and its support structure were analyzed by ABAQUS.

  9. Source of information-driven trading on the Prague Stock Exchange

    Czech Academy of Sciences Publication Activity Database

    Kopřiva, František

    -, č. 365 (2008), s. 1-39 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : trading systems * informed trading * emerging markets Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp365.pdf

  10. Source of information-driven trading on the Prague Stock Exchange

    Czech Academy of Sciences Publication Activity Database

    Kopřiva, František

    -, č. 365 (2008), s. 1-39 ISSN 1211-3298 R&D Projects: GA ČR(CZ) GA402/08/1376; GA MŠk LC542 Institutional research plan: CEZ:MSM0021620846 Keywords : trading systems * informed trading * emerging markets Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp365.pdf

  11. Development of in-pile test and evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Yung Hwan; Park, Jong Man; Joo, Kee Nam; Park, Duk Keun; Park, Se Jin; Oh, Jong Myung; Kim, Tae Ryong; Park Jin Suk; Lee, Jae Han [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-08-01

    To develop the in-pile test and evaluation technologies using KMRR, basic design of instrumented capsule and auxiliary system for material irradiation test and the related studies are performed. First, reactor and test hole characteristics are summarized, and conceptual design requirements of capsule to KMRR are reviewed. And fundamental principles and criteria for the instrumented capsule design are summarized. Basic design and analysis of instrumented capsule are performed, and design of capsule supporting system are also performed and structural integrity of the system is analyzed. Based on the prior studies, test mock-ups are designed and manufactured, and thermohydraulic and vibration tests are prepared. And, as in-pile test evaluation technologies, KMRR neutron dosimetry and mechanical tests related to material irradiation are investigated. 67 figs, 30 tabs, 41 refs. (Author).

  12. Analysis of Sandia in-pile EOS experiments

    International Nuclear Information System (INIS)

    Breitung, W.; Gorham-Bergeron, E.; Murata, K.K.

    1979-01-01

    Preliminary analysis has been carried out of the dynamic in-pile equation-of-state measurements for UO 2 , conducted at Sandia Laboratories, aimed at reducing the uncertainties in the effective UO 2 enthalpy corresponding to the measured pressures. Of the remaining width of the p-H band of some 350 J/g, about 200 J/g originate in the uncertainties of the analytical modelling and about 150 J/g result from the scatter in the experimental data

  13. In-pile experimental facility needs for LMFR safety research

    International Nuclear Information System (INIS)

    Kawata, Norio; Niwa, Hajime

    1994-01-01

    Although the achievement of the safety research during the past years has been significant, there still exists a strong need for future research, especially when there is prospect for future LMFR commercialization. In this paper, our current views are described on future research needs especially with a new in-pile experimental facility. The basic ideas and progress are outlined of a preliminary feasibility study. (author)

  14. The MOZART in-pile tritium extraction experiment

    International Nuclear Information System (INIS)

    Briec, M.

    1990-01-01

    In-pile tritium extraction behavior of various ceramics was compared in the MOZART experiment. The influence of temperature and purge gas composition was studied. The experimental results are analyzed by taking into account the processes of diffusion in the grain and desorption at grain surface. This analysis confirms that a better knowledge of the desorption process is necessary for a satisfactory explanation of the experimental data

  15. Enhanced in-pile instrumentation at the advanced test reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rempe, J. L.; Knudson, D. L.; Daw, J. E.; Unruh, T.; Chase, B. M.; Palmer, J.; Condie, K. G.; Davis, K. L. [Idaho National Laboratory, MS 3840, P.O. Box 1625, Idaho Falls, ID 83415 (United States)

    2011-07-01

    Many of the sensors deployed at materials and test reactors cannot withstand the high flux/high temperature test conditions often requested by users at U.S. test reactors, such as the Advanced Test Reactor (ATR) at the Idaho National Laboratory. To address this issue, an instrumentation development effort was initiated as part of the ATR National Scientific User Facility in 2007 to support the development and deployment of enhanced in-pile sensors. This paper reports results from this effort. Specifically, this paper identifies the types of sensors currently available to support in-pile irradiations and those sensors currently available to ATR users. Accomplishments from new sensor technology deployment efforts are highlighted by describing new temperature and thermal conductivity sensors now available to ATR users. Efforts to deploy enhanced in-pile sensors for detecting elongation and realtime flux detectors are also reported, and recently-initiated research to evaluate the viability of advanced technologies to provide enhanced accuracy for measuring key parameters during irradiation testing are noted. (authors)

  16. Enhanced In-Pile Instrumentation at the Advanced Test Reactor

    Science.gov (United States)

    Rempe, Joy L.; Knudson, Darrell L.; Daw, Joshua E.; Unruh, Troy; Chase, Benjamin M.; Palmer, Joe; Condie, Keith G.; Davis, Kurt L.

    2012-08-01

    Many of the sensors deployed at materials and test reactors cannot withstand the high flux/high temperature test conditions often requested by users at U.S. test reactors, such as the Advanced Test Reactor (ATR) at the Idaho National Laboratory. To address this issue, an instrumentation development effort was initiated as part of the ATR National Scientific User Facility in 2007 to support the development and deployment of enhanced in-pile sensors. This paper provides an update on this effort. Specifically, this paper identifies the types of sensors currently available to support in-pile irradiations and those sensors currently available to ATR users. Accomplishments from new sensor technology deployment efforts are highlighted by describing new temperature and thermal conductivity sensors now available to ATR users. Efforts to deploy enhanced in-pile sensors for detecting elongation and real-time flux detectors are also reported, and recently-initiated research to evaluate the viability of advanced technologies to provide enhanced accuracy for measuring key parameters during irradiation testing are noted.

  17. NEET In-Pile Ultrasonic Sensor Enablement-Final Report

    Energy Technology Data Exchange (ETDEWEB)

    J. Daw; J. Rempe; J. Palmer; P. Ramuhalli; R. Montgomery; H.T. Chien; B. Tittmann; B. Reinhardt; P. Keller

    2014-09-01

    Ultrasonic technologies offer the potential to measure a range of parameters during irradiation of fuels and materials, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes under harsh irradiation test conditions. There are two primary issues that currently limit in-pile deployment of ultrasonic sensors. The first is transducer survivability. The ability of ultrasonic transducer materials to maintain their useful properties during an irradiation must be demonstrated. The second issue is signal processing. Ultrasonic testing is typically performed in a lab or field environment, where the sensor and sample are accessible. The harsh nature of in-pile testing and the variety of desired measurements demand that an enhanced signal processing capability be developed to make in-pile ultrasonic sensors viable. To address these issues, the NEET ASI program funded a three year Ultrasonic Transducer Irradiation and Signal Processing Enhancements project, which is a collaborative effort between the Idaho National Laboratory, the Pacific Northwest National Laboratory, the Argonne National Laboratory, and the Pennsylvania State University. The objective of this report is to document the objectives and accomplishments from this three year project. As summarized within this document, significant work has been accomplished during this three year project.

  18. High-Resolution Source Parameter and Site Characteristics Using Near-Field Recordings - Decoding the Trade-off Problems Between Site and Source

    Science.gov (United States)

    Chen, X.; Abercrombie, R. E.; Pennington, C.

    2017-12-01

    Recorded seismic waveforms include contributions from earthquake source properties and propagation effects, leading to long-standing trade-off problems between site/path effects and source effects. With near-field recordings, the path effect is relatively small, so the trade-off problem can be simplified to between source and site effects (commonly referred as "kappa value"). This problem is especially significant for small earthquakes where the corner frequencies are within similar ranges of kappa values, so direct spectrum fitting often leads to systematic biases due to corner frequency and magnitude. In response to the significantly increased seismicity rate in Oklahoma, several local networks have been deployed following major earthquakes: the Prague, Pawnee and Fairview earthquakes. Each network provides dense observations within 20 km surrounding the fault zone, recording tens of thousands of aftershocks between M1 to M3. Using near-field recordings in the Prague area, we apply a stacking approach to separate path/site and source effects. The resulting source parameters are consistent with parameters derived from ground motion and spectral ratio methods from other studies; they exhibit spatial coherence within the fault zone for different fault patches. We apply these source parameter constraints in an analysis of kappa values for stations within 20 km of the fault zone. The resulting kappa values show significantly reduced variability compared to those from direct spectral fitting without constraints on the source spectrum; they are not biased by earthquake magnitudes. With these improvements, we plan to apply the stacking analysis to other local arrays to analyze source properties and site characteristics. For selected individual earthquakes, we will also use individual-pair empirical Green's function (EGF) analysis to validate the source parameter estimations.

  19. In-pile experimental device for Sirene thermionic converters

    International Nuclear Information System (INIS)

    Bliaux, J.; Durand, J.; Lazare-Chopard, G.

    1969-01-01

    The irradiation device described here, was built for in pile life tests of 100 We SIRENE converters. The nuclear converter is located in a sealed vacuum chamber, which is plugged at the lower end of a coaxial tubing acting as electrical leads. The output power is available on a variable resistive load on the bank of the reactor pool. Thermal, electrical and neutronic parameters of the converter are recorded. Since 1967, two permanent devices allowed five experiments in the swimming pool TRITON (CEN-FAR) and the results, obtained till now, are presented. (authors) [fr

  20. In-pile gamma spectrometry and irradiation control at Osiris

    International Nuclear Information System (INIS)

    Farny, G.; Destot, M.; Corre, J.; Texier, D.; Faugere, J.L.; Mouchnino, M.

    1975-01-01

    A new gamma spectrometry facility is available near Osiris reactor core, at Saclay. This device enables nuclear fuels to be examined in loops or capsules all along their irradiation, a few minutes being sufficient to transfer the fuel from the irradiation place to the measurement bench. So, spacelike and timelike history of a lot of fission products, especially short-lived radionuclides, can be observed. Using such in-pile spectrometry device, of original design, allows to avoid radioactive decay corrections and the risks of any information less. Performance of the device is given together with some preliminary results and their interpretation [fr

  1. MCNP calculations for the HCPB submodules in-pile test

    Energy Technology Data Exchange (ETDEWEB)

    Pijlgroms, B.J. [Section Nuclear and Reactor Physics, ECN Nuclear Research, Petten (Netherlands)

    1998-11-01

    This report describes the MCNP calculations that have been performed for the Helium Cooled Pebble Bed (HCPB) Submodules In-pile Test that has been planned for irradiation in the materials testing High Flux Reactor (HFR) at Petten. In this test, four HSM-8 submodules will be placed at core position H4. The report presents the neutron flux and power density profiles to be expected in the submodules. For the gamma induced heating only a rough estimation could be made. In the HCPB submodules the total specific heating does not exceed (36.7 {+-} 2.9)[W/cc]. 8 refs.

  2. SAS validation and analysis of in-pile TUCOP experiments

    International Nuclear Information System (INIS)

    Morman, J.A.; Tentner, A.M.; Dever, D.J.

    1985-01-01

    The validation of the SAS4A accident analysis code centers on its capability to calculate the wide range of tests performed in the TREAT (Transient Reactor Test Facility) in-pile experiments program. This paper presents the SAS4A analysis of a simulated TUCOP (Transient-Under-Cooled-Over-Power) experiment using seven full-length PFR mixed oxide fuel pins in a flowing sodium loop. Calculations agree well with measured thermal-hydraulic, pin failure time and post-failure fuel motion data. The extent of the agreement confirms the validity of the models used in the SAS4A code to describe TUCOP accidents

  3. In-pile Thermal Conductivity Characterization with Time Resolved Raman

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xinwei [Iowa State Univ., Ames, IA (United States). Dept. of Mechanical Engineering; Hurley, David H. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2018-03-19

    The project is designed to achieve three objectives: (1) Develop a novel time resolved Raman technology for direct measurement of fuel and cladding thermal conductivity. (2) Validate and improve the technology development by measuring ceramic materials germane to the nuclear industry. (3) Conduct instrumentation development to integrate optical fiber into our sensing system for eventual in-pile measurement. We have developed three new techniques: time-domain differential Raman (TD-Raman), frequency-resolved Raman (FR-Raman), and energy transport state-resolved Raman (ET-Raman). The TD-Raman varies the laser heating time and does simultaneous Raman thermal probing, the FR-Raman probes the material’s thermal response under periodical laser heating of different frequencies, and the ET-Raman probes the thermal response under steady and pulsed laser heating. The measurement capacity of these techniques have been fully assessed and verified by measuring micro/nanoscale materials. All these techniques do not need the data of laser absorption and absolute material temperature rise, yet still be able to measure the thermal conductivity and thermal diffusivity with unprecedented accuracy. It is expected they will have broad applications for in-pile thermal characterization of nuclear materials based on pure optical heating and sensing.

  4. The Phebus fission products in pile test programme

    International Nuclear Information System (INIS)

    Bussac, J.; Holtbecker, H.

    1988-01-01

    The need for quantifying the radioactive materials escaping from an LWR Nuclear Power Plant following a melt-down accident has arisen relatively late in the nuclear reactor technology development process. The TMI-2 accident in 1979 and the Chernobyl accident in 1986 have confirmed the importance of a good knowledge of phenomena which take place in a plant undergoing extreme accident conditions. After an extensive resarch effort which has involved the major nuclear countries for several years, we are now at the stage where a selective and converging attitude should be taken towards the wide range of problems underlying severe accidents. Selective, because we must understand what is important and what could be neglected. Converging, because we must arrive at a consensus at international level on the methods to treat these problems and a common understanding of the main scientific phenomena and the models to correctly represent them. After a large amount of separate effects tests and semi-integral in-pile and out-of-pile experiments, the Phebus FP project is being started as an experimental effort to quantify the relative importance of complicated processes and to give an insight into the interconnection of various mechanisms. The overall objective of this programme is to provide a qualified data base of integral in-pile experiments to validate codes dealing with FP transport in reactor core, primary cooling system and containment. This paper describes mainly the motivations and objectives of the Phebus PF programme

  5. In-pile loop experiments in water chemistry and corrosion

    International Nuclear Information System (INIS)

    Kysela, J.

    1986-09-01

    Results on the study of Zr-1% Nb alloy corrosion, in out-of and in-pile loops simulating the working conditions of the VVER-440 reactor (Soviet, PWR type), covered the time period May 1982-April 1986 were reported, as well as, results on transport and filtration of corrosion products. Methods and techniques used in the study included remote measurement of corrosion rate by polarizing resistance, out-of-pile loop at the temperature 350 deg. C, pressure 19 MPa, circulation 20 kgs/h and in-pile water loop with constant flow rate 10,000 kgs/h, pressure 16 MPa, temperature 330 deg. C and neutron flux 7x10 13 n/cm 2 .s. It was shown that solid suspended particles with chemical composition corresponding most frequently to magnetite or nickelous ferrite, though with non-stoichiometric composition Me x 2+ Fe 3- x 3+ O 4 were found. Continuous filtration of water by means of electromagnetic filter leads to a decrease of radioactivity of the outer epitactic layer only. Effect of filtration on the inner topotactic layer is negligible. The corrosion rates for the above-mentioned parameters are given

  6. Program of in-pile IASCC testing under the simulated actual plant condition. Development of technique for in-pile IASCC initiation test in JMTR

    International Nuclear Information System (INIS)

    Ugachi, Hirokazu; Tsukada, Takashi; Kaji, Yoshiyuki; Nagata, Nobuaki; Dozaki, Koji; Takiguchi, Hideki

    2003-01-01

    Irradiation assisted stress corrosion cracking (IASCC) is caused by the synergistic effects of neutron irradiation, stress and corrosion by high temperature water. It is, therefore, essential to perform in-pile SCC tests, which are material tests under the conditions simulating those of actual LWR operation, in order to clarify the precise mechanism of the phenomenon, though mainly out-of-pile SCC tests for irradiated materials have been carried out in this research field. There are, however, many difficulties to perform in-pile SCC tests. Performing in-pile SCC tests, essential key techniques must be developed. Hence as a part of development of the key techniques for in-pile SCC tests, we have embarked on development of the test technique which enables us to obtain the information concerning the effect of such parameters as applied stress level, water chemistry, irradiation conditions, etc. on the crack initiation behavior. Although it is difficult to detect the crack initiation in in-pile SCC tests, the crack initiation can be evaluated by the detection of specimen rupture if the cross section area of the specimen is small enough. Therefore, we adopted the uniaxial constant loading (UCL) test with small tensile specimens. This paper will describe the current status of the development of several techniques for in-pile SCC initiation tests in JMTR and the results of the performance tests of the designed testing unit using the out-of-pile loop facility. (author)

  7. In-pile IASCC growth tests of irradiated stainless steels in JMTR

    Energy Technology Data Exchange (ETDEWEB)

    Chimi, Yasuhiro; Kasahara, Shigeki; Ise, Hideo; Kawaguchi, Yoshihiko; Nakano, Junichi; Nishiyama, Yutaka [Japan Atomic Energy Agency, Nuclear Safety Research Center, Tokai, Ibaraki (Japan); Shibata, Akira; Ohmi, Masao [Japan Atomic Energy Agency, Oarai Research and Development Center, Oarai, Ibaraki (Japan)

    2012-03-15

    The Japan Atomic Energy Agency (JAEA) has an in-pile irradiation-assisted stress corrosion cracking (IASCC) test plan to evaluate in-situ effects of neutron/{gamma}-ray irradiation on crack growth of irradiated stainless steels under high-temperature water conditions for commercial boiling water reactors (BWRs) using the Japan Materials Testing Reactor (JMTR). Crack growth rate and its electrochemical corrosion potential (ECP) dependence are different between in-pile test and post irradiation examination (PIE), but these differences are not fully understood. The objectives of the present study are to understand the difference between in-pile and out-of-pile IASCC growth and to confirm the effectiveness of mitigation due to lowering ECP on in-pile crack growth rates. For in-pile crack growth tests, we have selected a large compact tension specimen such as 0.5T-CT because of validity of SCC growth test at a high stress intensity factor (K-value). For loading a 0.5T-CT specimen up to K - 30 MPa {radical}m, we have adopted a lever type loading unit for in-pile crack growth tests in the JMTR. In this report, an in-pile test plan for crack growth of irradiated SUS316L stainless steels under simulated BWR conditions in the JMTR and current status of development of in-pile crack growth test techniques are presented. (author)

  8. In-pile loop experiments in water chemistry and corrosion

    International Nuclear Information System (INIS)

    Kysela, J.; Jindrich, K.; Masarik, V.; Fric, Z.; Chotivka, V.; Hamerska, H.; Vsolak, R.; Erben, O.

    1986-08-01

    Methods and techniques used were as follows: (a) Method of polarizing resistance for remote monitoring of instantaneous rate of uniform corrosion. (b) Out-of-pile loop at the temperature 350 degC, pressure 19 MPa, circulation 20 kgs/h, testing time 1000 h. (c) High temperature electromagnetic filter with classical solenoid and ball matrix for high pressure filtration tests. (d) High pressure and high temperature in-pile water loop with coolant flow rate 10 000 kgs/h, neutron flux in active channel 7x10 13 n/cm 2 .s, 16 MPa, 330 degC. (e) Evaluation of experimental results by chemical and radiochemical analysis of coolant, corrosion products and corrosion layer on surface. The results of measurements carried out in loop facilities can be summarized into the following conclusions: (a) In-pile and out-of-pile loops are suitable means of investigating corrosion processes and mass transport in the nuclear power plant primary circuit. (b) In studying transport phenomena in the loop, it is necessary to consider the differences in geometry of the loop and the primary circuit, mainly the ratio of irradiated and non-irradiated surfaces and volumes. (c) In the experimental facility simulating the WWER-type nuclear power plant primary circuit, solid suspended particles of a chemical composition corresponding most frequently to magnetite or nickel ferrite, though with non-stoichiometric composition Me x 2+ Fe 3-x 3+ O 4 , were found. (d) Continuous filtration of water by means of an electromagnetic filter removing large particles of corrosion products leads to a decrease in radioactivity of the outer epitactic layer only. The effect of filtration on the inner topotactic layer is negligible

  9. Out-of-pile and in-pile temperature noise investigations: a survey of methods results and models

    International Nuclear Information System (INIS)

    Dentico, G.; Giovannini, R.; Marseguerra, M.; Pacilio, N.; Taglienti, S.; Tosi, V.; Vigo, A.; Oguma, R.

    1982-01-01

    A review is given of the main results obtained from temperature noise measurements performed in out-of-pile sodium loops on fast fuel element mock-ups. Sources of data were thermocouples placed in the central axis of the channel downstream from the bundle end. Autoregressive moving average (ARMA) models have been applied to several temperature time series; the analysis shows that a simple ARMA (3, 2) model adequately accounts for the observed fluctuations. Finally, highlights of a heat transfer stochastic model are also reported together with a preliminary validation against in-pile experimental data. (author)

  10. Emissions Trading Resources

    Science.gov (United States)

    Learn about emissions trading programs, also known as cap and trade programs, which are market-based policy tools for protecting human health and the environment by controlling emissions from a group of sources.

  11. A primer on polymer nomenclature: Structure-based, sourced-based and trade names

    Science.gov (United States)

    Polymer nomenclature is important because it is part of the language of polymer science and is needed for polymer identification, reference, and documentation. A primer on polymer nomenclature is provided herein for people new to the field or for instructional use. Both structure-based and source-...

  12. Renewable energy sources in European energy supply and interactions with emission trading

    International Nuclear Information System (INIS)

    Moest, Dominik; Fichtner, Wolf

    2010-01-01

    This paper presents a model-based approach, which allows to determine the optimised structure and operation of the EU-15 electricity supply under different political and economic framework conditions, with a focus on the integration of renewable energy sources for electricity generation (RES-E) in the EU-15 countries. The approach is designed to take into account the characteristics of power production from both renewable and conventional sources, including the technological and economic characteristics of existing plants as well as those of future capacity expansion options. Beyond that, fuel supply structures are modelled, as well as the international markets for power and CO 2 -certificates with their restrictions. Thus, a profound evaluation of the exploitation of mid-term renewable potentials and an assessment of the market penetration of the various renewable power generation technologies under the (normative) premise of a cost-optimised evolution of the power system becomes possible. Results show that a promotion of renewable energies reduces the scarcity of CO 2 -emission allowances and thus lowers marginal costs of CO 2 reduction up to 30% in 2030. Despite the higher overall costs, a diversification of the energy resource base by RES-E use is observed, as primarily natural gas and nuclear fuels are replaced.

  13. Quota regime for renewable energy sources and Green Labels trading in the electricity market of the Netherlands

    International Nuclear Information System (INIS)

    Drillisch, J.

    1998-01-01

    The renewables quota regime combined with a ''green electricity'' labelling and trading system, implemented by the Dutch association of distribution undertakings, is the first of its kind in Europe. The distribution undertakings are bound by a commitment to take and distribute ''green label'' electricity from renewables amounting to approx. 3% of their total sales to contractual customers. This is a modest percentage, but the quota regime already proved to be a promoter of close-to-the-market generation technologies. It would be too early now to make a final statement on the quota regime's influence on enhanced use of renewable energy sources. Practice so far also revealed the need for some modifications in the design of the pricing system for''green electricity''. Current debates consider integration of renewable energy sources abroad. The first accounting date for giving evidence of compliance with the commitment to green label quotas is late in the year 2000. This will be the test for the system and the efficiency of sanctions provided for in case of non-compliance. It will be a task of the future to examine whether it might be appropriate to establish a similar system for the heat market. (RHM/CB) [de

  14. Advanced In-pile Instrumentation for Material and Test Reactors

    International Nuclear Information System (INIS)

    Rempe, J.L.; Knudson, D.L.; Daw, J.E.; Unruh, T.C.; Chase, B.M.; Davis, K.L.; Palmer, A.J.; Schley, R.S.

    2013-06-01

    The US Department of Energy sponsors the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) program to promote U.S. research in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, advancing U.S. energy security needs. A key component of the ATR NSUF effort is to design, develop, and deploy new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. This paper describes the strategy developed by the Idaho National Laboratory (INL) for identifying instrumentation needed for ATR irradiation tests and the program initiated to obtain these sensors. New sensors developed from this effort are identified; and the progress of other development efforts is summarized. As reported in this paper, INL staff is currently involved in several tasks to deploy real-time length and flux detection sensors, and efforts have been initiated to develop a crack growth test rig. Tasks evaluating 'advanced' technologies, such as fiber-optics based length detection and ultrasonic thermometers are also underway. In addition, specialized sensors for real-time detection of temperature and thermal conductivity are not only being provided to NSUF reactors, but are also being provided to several international test reactors. (authors)

  15. In pile AISI 316L. Low cycle fatigue. Final report

    International Nuclear Information System (INIS)

    Van Nieuwenhove, R.; Moons, F.

    1994-12-01

    In pile testing of the effect of neutron irradiation on the fatigue life of the reference material AISI 316L was performed in the framework of the European fusion technology program. The overall programme, carried out at SCK CEN (Mol,Belgium), exists of two instrumented rigs for low cycle fatigue testing, which were consecutively loaded in the BR-2 reactor during periods Jan (94) June (94) and Aug (94)-Dec(94). In each experiment, two identical samples were loaded by means of a pneumatically driven system. The samples were instrumented with thermocouples, strain gages, linear variable displacement transducers, and activation monitors. The experimental conditions are given. Type of fatigue test: load controlled, symmetric, uniaxial, triangular wave shape; stress range: about 580 MPa; sample shape: hourglass, diameter 3.2 mm, radius 12.5 mm; environment: NaK (peritectic); temperature: 250 C; maximum dpa value up to fracture: 1.7. Two of four samples were broken (one in each experiment) after having experienced 17 419 respectively 11 870 stress cycles. These new data points confirm earlier results from pile fatigue tests: irradiation causes no degradation of fatigue life of AISI 316L steel, at least for the parameters corresponding to these experiments

  16. A comprehensive in-pile test of PWR fuel bundle

    Energy Technology Data Exchange (ETDEWEB)

    Kang Rixin; Zhang Shucheng; Chen Dianshan (Academia Sinica, Beijing (China). Inst. of Atomic Energy)

    1991-02-01

    An in-pile test of PWR fuel bundle has been conducted in HWRR at IAE of China. This paper describes the structure of the test bundle (3x3-2), fabrication process and quality control of the fuel rod, irradiation conditions and the main Post Irradiation Examination (PIE) results. The test fuel bundle was irradiated under the PWR operation and water chemistry conditions with an average linear power of 381 W/cm and reached an average burnup of 25010 MWd/tU of the fuel bundle. After the test, destructive and non-destructive examination of the fuel rods was conducted at hot laboratories. The fission gas release was 10.4-23%. The ridge height of cladding was 3 to 8 {mu}m. The hydrogen content of the cladding was 80 to 140 ppm. The fuel stack height was increased by 2.9 to 3.3 mm. The relative irradiation growth was about 0.11 to 0.17% of the fuel rod length. During the irradiation test, no fuel rod failure or other abnormal phenomena had been found by the on-line fuel failure monitoring system of the test loop and water sampling analysis. The structure of the test fuel assembly was left undamaged without twist and detectable deformation. (orig.).

  17. Advanced In-Pile Instrumentation for Materials Testing Reactors

    Science.gov (United States)

    Rempe, J. L.; Knudson, D. L.; Daw, J. E.; Unruh, T. C.; Chase, B. M.; Davis, K. L.; Palmer, A. J.; Schley, R. S.

    2014-08-01

    The U.S. Department of Energy sponsors the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) program to promote U.S. research in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, advancing U.S. energy security needs. A key component of the ATR NSUF effort is to design, develop, and deploy new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. This paper describes the strategy developed by the Idaho National Laboratory (INL) for identifying instrumentation needed for ATR irradiation tests and the program initiated to obtain these sensors. New sensors developed from this effort are identified, and the progress of other development efforts is summarized. As reported in this paper, INL researchers are currently involved in several tasks to deploy real-time length and flux detection sensors, and efforts have been initiated to develop a crack growth test rig. Tasks evaluating `advanced' technologies, such as fiber-optics based length detection and ultrasonic thermometers, are also underway. In addition, specialized sensors for real-time detection of temperature and thermal conductivity are not only being provided to NSUF reactors, but are also being provided to several international test reactors.

  18. Fuel disruption mechanisms determined in-pile in the ACRR

    International Nuclear Information System (INIS)

    Wright, S.A.; Fischer, E.A.

    1984-09-01

    Over thirty in-pile experiments were performed to investigate fuel disruption behavior for LMFBR loss of flow (LOF) accidents. These experiments reproduced the heating transients for a variety of accidents ranging from slow LOF accidents to rapid LOF-driven-TOP accidents. In all experiments the timing and mode of the fuel disruption were observed with a high speed camera, enabling detailed comparisons with a fuel pin code, SANDPIN. This code transient intra- and inter-granular fission gas behavior to predict the macroscopic fuel behavior, such as fission gas induced swelling and frothing, cracking and breakup of solid fuel, and fuel vapor pressure driven dispersal. This report reviews the different modes of fuel disruption as seen in the experiments and then describes the mechanism responsible for the disruption. An analysis is presented that describes a set of conditions specifying the mode of fuel disruption and the heating conditions required to produce the disruption. The heating conditions are described in terms of heating rate (K/s), temperature gradient, and fuel temperature. A fuel disruption map is presented which plots heating rate as a function of fuel temperature to illustrate the different criteria for disruption. Although this approach to describing fuel disruption oversimplifies the fission gas processes modeled by SANDPIN, it does illustrate the criteria used to determine which fuel disruption mechanism is dominant and on what major fission gas parameters it depends

  19. Preliminary results from initial in-pile debris bed experiments

    International Nuclear Information System (INIS)

    Rivard, J.B.

    1977-01-01

    An accident in a liquid metal fast breeder reactor (LMFBR) in which molten core material is suddenly quenched with subcooled liquid sodium could result in extensive fragmentation and dispersal of fuel as subcritical beds of frozen particulate debris within the reactor vessel. Since this debris will continue to generate power due to decay of retained fission products, containment of the debris is threatened if the generated heat is not removed. Therefore, the initial safety question is the capacity which debris beds may have for transfer of the decay heat to overlying liquid sodium by natural processes--i.e., without the aid of forced circulation of the coolant. Up to the present time, all experiments on debris bed behavior either have used substitute materials (e.g., sand and water) or have employed actual materials, but atypical heating methods. Increased confidence in the applicability of debris bed simulations is afforded if the heat is generated within the fuel component of the appropriate fast reactor materials. The initial series of in-pile tests reported on herein constitutes the first experiments in which the internal heating mode has been produced in particulate oxide fuel immersed in liquid sodium. Fission heating of the fully-enriched UO 2 in the experiment while it is contained within Sandia Laboratories Annular Core Pulse Reactor (ACPR), operating in its steady-state mode, approximates the decay heating of debris. Preliminary results are discussed

  20. Design criteria and fabrication in-pile test section of HANARO fuel test loop

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.

    1997-10-01

    Safety state fuel test loop will be equipped in HANARO to obtain the development and betterments of advanced fuel and materials through the irradiation tests. The objective of this study is to determine the design criteria and technical specification of in-pile test section and to specify the manufacturing requirements of in-pile test section. HANARO fuel test loop was designed to meet the CANDU and PWR fuel testing and in-pile section will be manufactured and installed in HANARO. The design criteria and technical specification of in-pile test section could be used the fuel and materials design with for irradiation testing IPS of HANARO fuel test loop. This results will become guidances for the planning and programming of irradiation testing. (author). 12 refs., tabs., figs.

  1. Nuclear heating measurements by in-pile calorimetry: prospective works for a microsensor design

    Energy Technology Data Exchange (ETDEWEB)

    Reynard-Carette, C.; Carette, M.; Aguir, K.; Bendahan, M.; Fiorido, T. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France); Lyoussi, A.; Fourmentel, D.; Villard, J.F. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 (France); Barthes, M.; Lanzetta, F.; Layes, G.; Vives, S. [FEMTO-ST, UMR 6174, Departement ENERGIE, Universite de Franche-Comte, 90000, Belfort (France)

    2015-07-01

    Since 2009 works have been performed in the framework of joint research programs between CEA and Aix-Marseille University. The main aim of these programs is to design and develop in-pile instrumentations, advanced calibration procedure and accurate measurement methods in particular for the new Material Testing Reactor (MTR) under construction in the South of France: Jules Horowitz Reactor (JHR). One major sensor is a specific radiometric calorimeter, which was studied out-of-pile from a thermal point of view and in-pile during irradiation campaigns. This sensor type is dedicated to measurements of nuclear heating (energy deposition rate per mass unit induced by interactions between nuclear rays and matter) inside experimental channels of MTRs. This kind of in-pile calorimeter corresponds to heat flux calorimeter exchanging with the external cooling fluid. This thermal running mode allows the establishment of steady thermal conditions inside the sensor to carry out online continuous measurements inside the reactor (core or reflector). Two main types of calorimeters exist. The first type consists of a single cell calorimeter. It is divided into a sample of material to be tested and a jacket instrumented with two thermocouples or a single thermocouple (Gamma Thermometer). The second, called a differential calorimeter, is composed of two superposed twin cells (a measurement cell containing a sample of material, and a reference cell to remove the heating of the cell body) instrumented with four thermocouples and two electrical heaters. Contrary to a single-cell calorimeter, a differential calorimeter allows the compensation of the parasite nuclear heating of the sensor body or jacket. Moreover, it possesses interesting advantages: thanks to the heaters embedded in the cells, three different measurement methods can be applied during irradiations to quantify nuclear heating. The first one is based on the use of out-of-pile calibration curves obtained by generating a heat

  2. In-pile creep strain and failure of CW 316 Ti pressurized tubes

    International Nuclear Information System (INIS)

    Boutard, J.L.; Maillard, A.; Carteret, Y.; Levy, V.; Meny, L.

    1984-06-01

    The in-pile creep and failure behavior of CW 316 Ti pressurized tubes irradiated in the same rig at 660-680 0 C and 81.4 dpaF max in Phenix is presented and compared to monitors of the same heat. The in-pile plastic strains are of the same order of what is expected from the monitors and are rather independent of the dose rate in the range 4 to 9 x 10 -3 dpaF/h. Such a behavior supports the assumption that the out-of-pile deformation mechanisms are operative in pile and a certain balance occurs between modification of the microstructure, dynamic hardening and deformation mechanisms due to irradiation. Examinations by fractography and optical micrography, show that the failures are intergranular either in-pile or out-of-pile. In both cases the damage consists in intergranular wedge cracks, and no cavitation can be observed by transmission electron microscopy. Then the in-pile embrittlement which gives lower failure strain and time is to be associated with a decrease of the surface energy of grain-boundaries rather then growth and coalescence of cavities

  3. Ultrasonic Thermometry for In-Pile Temperature Detection

    International Nuclear Information System (INIS)

    Daw, J.E.; Rempe, J.L.; Wilkins, S.C.

    2002-01-01

    example, signal processing can be very complicated, as multiple echoes may overlap. Contact between the sensor and solid materials can cause extraneous echoes. If a sheath is required, contact bonding at high temperatures may cause extraneous echoes or attenuation of primary echoes. The most successful materials used in previous studies, tungsten and rhenium, are unattractive for nuclear applications due to material transmutation. Clearly, in order for ultrasonic thermometers to be viable for an in-pile sensor, these issues must be resolved through the use of modern signal processing and materials technologies. As part of the INL feasibility study, all of the issues associated with UT use and proposed resolution options will be identified and evaluated. Once most promising options are proven, it is planned to produce one or more prototype ultrasonic temperature sensors for evaluation. Ultimately, a full test should include a long term installation in a high temperature test assembly installed in a high neutron flux environment, such as that found in the Idaho National Laboratory's Advanced Test Reactor.

  4. Trade Policy

    OpenAIRE

    Murray Gibbs

    2007-01-01

    In an otherwise insightful and thoughtful article, Sebastian Pfotenhauer (Trade Policy Is Science Policy,” Issues, Fall 2013) might better have entitled his contribution “Trade Policy Needs to Be Reconciled with Science Policy.” The North American Free Trade Agreement (NAFTA) and the agreements administered by the World Trade Organization, particularly the General Agreement on Tariffs and Trade (GATT) and the Technical Barriers to Trade (TBT), were adopted to promote international trade and i...

  5. Development of enclosure technique of tag gas for in-pile creep test

    International Nuclear Information System (INIS)

    Izaki, Toru; Ichikawa, Shoichi; Soroi, Masatoshi; Ito, Chikara

    2004-01-01

    Outline of the enclosure technique of tag gas for in-pile creep test is stated. In order to carry out in-pile creep test, the sample can enclose tag gas before the test and then the sample is inserted into MARICO-2 (Material Testing Rig with Temperature Control) in FBR 'JOYO' MK-III for the irradiation test. Outline of in-pile creep test using tag gas, enclosure system of tag gas, detection of a part of broken sample and identification of sample are explained. 126-, 128-, 129-, 131-, 132-, and 134-Xe are used as tag gases. The samples are identified by RIMS (Laser Resonance Ionization Mass Spectroscopy) in ppt order. ODS ferritic steel will be tested by the method in the next step. (S.Y.)

  6. Acoustic Emission Signal Processing Technique to Characterize Reactor In-Pile Phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Vivek Agarwal; Magdy Samy Tawfik; James A Smith

    2014-07-01

    Existing and developing advanced sensor technologies and instrumentation will allow non-intrusive in-pile measurement of temperature, extension, and fission gases when coupled with advanced signal processing algorithms. The transmitted measured sensor signals from inside to the outside of containment structure are corrupted by noise and are attenuated, thereby reducing the signal strength and signal-to-noise ratio. Identification and extraction of actual signal (representative of an in-pile phenomenon) is a challenging and complicated process. In this paper, empirical mode decomposition technique is proposed to reconstruct actual sensor signal by partially combining intrinsic mode functions. Reconstructed signal corresponds to phenomena and/or failure modes occurring inside the reactor. In addition, it allows accurate non-intrusive monitoring and trending of in-pile phenomena.

  7. In-pile experiments on fuel rod behaviour during a LOCA

    International Nuclear Information System (INIS)

    Sepold, E.H.; Karb, E.H.; Pruessmann, M.

    1981-07-01

    This report describes the results of the Test Series G2/3 within the in-pile experimental program for the investigation of LWR fuel rod behavior. The results were obtained with single rods of a PWR design in the DK loop of the FR2 reactor at the Kernforschungszentrum Karlsruhe (KfK). The in-pile tests with the objective of investigating the influence of a nuclear environment on the mechanisms of fuel rod failure were being performed with irradiated and unirradiated rods. The main parameter of the test program ist the burnup, ranging from 2500 to 35000 MWd/t. The results of test series G2/3 (35000 MWd/t) with respect to the burst data, i.e. burst temperature, burst pressure, and burst strain, do not indicate major differences from the in-pile tests with unirradiated test specimens. (orig.) [de

  8. In-pile experiemts on fuel rod behavior during a LOCA

    International Nuclear Information System (INIS)

    Pruessmann, M.; Karb, E.H.; Sepold, L.

    1981-02-01

    This report describes the results of the Test Series G1 within the in-pile experimental program for the investigation of LWR fuel rod behavior. The results were obtained with single rods of a PWR design in the DK loop of the FR2 reactor at the Kernforschungszentrum Karlsruhe (KfK). The in-pile tests with the objective of investigating the influence of a nuclear environment on the mechansims of fuel rod failure were being performed with irradiated and unirradiated rods. The main parameter of the test program is the burnup ranging from 2500 to 35 000 MWd/t. The results of test series G1 (35 000 MWd/t) with respect to the burst data, i.e. burst temperature, burst pressure, and burst strain, do not indicate major differences from the in-pile tests with unirradiated test specimens. (orig.) [de

  9. TRADE-OFF BETWEEN CARBON STORAGE AND BIOMASS-BASED ENERGY SOURCES ECOSYSTEM SERVICES, THE CASE STUDY FROM THE PROVINCE OF ROVIGO (ITALY

    Directory of Open Access Journals (Sweden)

    E. Gissi

    2014-04-01

    Full Text Available Biomass Based Energy Sources (BBES are an Ecosystem Service (ES which can contribute to achieve EU 2020 targets and to ensure energy security. Their effects on other ESs can be different according to biomass typologies, as energy crops and residuals. In order to plan a Greenhouse Gasses (GHGs efficient supply chain and to maintain ES of carbon storage, as well as other related ESs, effect of feedstock chain on Soil Organic Carbon (SOC should be considered. An ESs approach, based on the cascade model, takes into consideration biological interdependencies and management options to assess trade-offs. This study aims to describe and map trade-off between BBES and carbon storage services in Province of Rovigo (Veneto Region, Italy, a mainly intensive cultivated area. Results show that the trade-offs  between the two ESs is potentially high in large part of the territory (75%, while just 25% expresses low possibility of conflict. Possible management options are discussed in order to minimize trade-off between energy provision and climate change mitigation. This study highlights that ESs approach can provide a suitable tool for decision makers, with respect to biomass feedstock chain, whose effects on ecosystems are often underestimated.

  10. Trade Analysis and Safeguards

    International Nuclear Information System (INIS)

    Chatelus, R.; Schot, P.M.

    2010-01-01

    In order to verify compliance with safeguards and draw conclusions on the absence of undeclared nuclear material and activities, the International Atomic Energy Agency (IAEA) collects and analyses trade information that it receives from open sources as well as from Member States. Although the IAEA does not intervene in national export controls, it has to monitor the trade of dual use items. Trade analysis helps the IAEA to evaluate global proliferation threats, to understand States' ability to report exports according to additional protocols but also to compare against State declarations. Consequently, the IAEA has explored sources of trade-related information and has developed analysis methodologies beyond its traditional safeguards approaches. (author)

  11. Estimating the elasticity of trade: the trade share approach

    OpenAIRE

    Mauro Lanati

    2013-01-01

    Recent theoretical work on international trade emphasizes the importance of trade elasticity as the fundamental statistic needed to conduct welfare analysis. Eaton and Kortum (2002) proposed a two-step method to estimate this parameter, where exporter fixed effects are regressed on proxies for technology and wages. Within the same Ricardian model of trade, the trade share provides an alternative source of identication for the elasticity of trade. Following Santos Silva and Tenreyro (2006) bot...

  12. Progress In Developing An In-Pile Acoustically Telemetered Sensor Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Smith, James A.; Garrett, Steven L.; Heibel, Michael D.; Agarwal, Vivek; Heidrich, Brenden J.

    2016-09-01

    A salient grand challenge for a number of Department of Energy programs such as Fuels Cycle Research and Development ( includes Accident Tolerant Fuel research and the Transient Reactor Test Facility Restart experiments), Light Water Sustainability, and Advanced Reactor Technologies is to enhance our fundamental understanding of fuel and materials behavior under irradiation. Robust and accurate in-pile measurements will be instrumental to develop and validate a computationally predictive multi-scale understanding of nuclear fuel and materials. This sensing technology will enable the linking of fundamental micro-structural evolution mechanisms to the macroscopic degradation of fuels and materials. The in situ sensors and measurement systems will monitor local environmental parameters as well as characterize microstructure evolution during irradiation. One of the major road blocks in developing practical robust, and cost effective in-pile sensor systems, are instrument leads. If a wireless telemetry infrastructure can be developed for in-pile use, in-core measurements would become more attractive and effective. Thus to be successful in accomplishing effective in-pile sensing and microstructure characterization an interdisciplinary measurement infrastructure needs to be developed in parallel with key sensing technology. For the discussion in this research, infrastructure is defined as systems, technology, techniques, and algorithms that may be necessary in the delivery of beneficial and robust data from in-pile devices. The architecture of a system’s infrastructure determines how well it operates and how flexible it is to meet future requirements. The limiting path for the effective deployment of the salient sensing technology will not be the sensors themselves but the infrastructure that is necessary to communicate data from in-pile to the outside world in a non-intrusive and reliable manner. This article gives a high level overview of a promising telemetry

  13. Summary on out-of-pile and in-pile properties of M5 alloy

    International Nuclear Information System (INIS)

    Zhao Wenjin

    2001-01-01

    The out-of-pile and in-pile corrosion, mechanical properties, microstructure,hydrogen absorption, creep and growth resistances of M5 alloy using as PWR fuel rod cladding materials developed by FRAMATOME in France has been summarized with reference to the literatures. The results obtained from in-pile irradiation tests show that the corrosion and hydrogen absorption resistances, creep and irradiation growth resistances of M5 alloy cladding are superior to that of the optimized Zircaloy-4. It could be estimated that the M5 alloy enables rod burnups close to 65GWd/tU to be reached

  14. In-Pile Loop Safety in Integrated with the Multipurpose Reactor in the case of in-Pile Loop Leakage at the Core Position

    International Nuclear Information System (INIS)

    Suharno; Sugianto; Giarno; Aliq; Widodo, Surip; Aji, Bintoro; Purba, Julwan Hendry; Karyanta, Edy

    1999-01-01

    In-Pile Loop Safety analysis in integrated with the multipurpose reactor in the case of In-Pile Loop leakage at the core position has been conducted which intended to evaluate the failure of fuel element. By considering design of In-Pile Loop and the highest possibility position of of leakage, the failure of fuel element is emphasized on mechanical aspect. The thermal hydraulic aspect is not taken into account due to the condition that when the leakage occurred the reactor has been in shut down condition. It is determined that the spray attacks the top position of fuel element, and to be calculated the force, of spray that produces 1 cm deflection on the single fuel element. Using that four (4) fuel elements is calculated because in the real condition 4 fuel elements will undergo deflection of 43.8 kg is obtained that producing 1 cm deflection and the force of 1228 kg that causes failure on the bottom of fuel element as shear force is also obtained. Whatever the force, high or low, the damage of fuel element occurred at the bottom part or at the position of grid plate. Therefore there is no damage on the fuel part (uranium meat) and the releasing of radioactive material from fuel plate is not happened

  15. In-Pile Tests for IASCC Growth Behavior of Irradiated 316L Stainless Steel under Simulated BWR Condition in JMTR

    Science.gov (United States)

    Chimi, Yasuhiro; Kasahara, Shigeki; Ise, Hideo; Kawaguchi, Yoshihiko; Nakano, Junichi; Nishiyama, Yutaka

    The Japan Atomic Energy Agency (JAEA) has an in-pile irradiation test plan to evaluate in-situ effects of neutron/γ-ray irradiation on stress corrosion crack (SCC) growth of irradiated stainless steels using the Japan Materials Testing Reactor (JMTR). SCC growth rate and its dependence on electrochemical corrosion potential (ECP) are different between in-pile test and post irradiation examination (PIE). These differences are not fully understood because of a lack of in-pile data. This paper presents a systematic review on SCC growth data of irradiated stainless steels, an in-pile test plan for crack growth of irradiated SUS316L stainless steel under simulated BWR conditions in the JMTR, and the development of the in-pile test techniques.

  16. Remote-welding technique for assembling in-pile IASCC capsule in hot cell

    International Nuclear Information System (INIS)

    Kawamata, Kazuo; Ishii, Toshimitsu; Kanazawa, Yoshiharu; Iwamatsu, Shigemi; Ohmi, Masao; Shimizu, Michio; Matsui, Yoshinori; Saito, Jun-ichi; Ugachi, Hirokazu; Kaji, Yoshiyuki; Tsukada, Takashi

    2006-01-01

    In order to investigate behavior of the irradiation assisted stress corrosion cracking (IASCC) caused by the simultaneous effects of neutron irradiation and high temperature water environment in such a light water reactor (LWR), it is necessary to perform crack growth tests in an in-pile IASCC capsule irradiated in the Japan Materials Testing Reactor (JMTR). The development of the remote-welding technique is essential for remotely assembling the in-pile IASCC capsule installing the pre-irradiated CT specimens. This report describes a new remote-welding machine developed for assembling the in-pile IASCC capsule. The remote-welding technique that the capsule tube is rotated light under the fixed torch was applied to the machine for the welding of thick and large-diameter tubes. The assembly work of four in-pile IASCC capsules having pre-irradiated CT specimens in the hot cell was succeeded for performing the crack growth test under the neutron irradiation in JMTR. The irradiation test of two capsules has been already finished in JMTR without problems. (author)

  17. NEET In-Pile Ultrasonic Sensor Enablement-FY 2012 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    JE Daw; JL Rempe; BR Tittmann; B Reinhardt; P Ramuhalli; R Montgomery; HT Chien

    2012-09-01

    Several Department Of Energy-Nuclear Energy (DOE-NE) programs, such as the Fuel Cycle Research and Development, Advanced Reactor Concepts, Light Water Reactor Sustainability, and Next Generation Nuclear Plant programs, are investigating new fuels and materials for advanced and existing reactors. A key objective of such programs is to understand the performance of these fuels and materials when irradiated. The Nuclear Energy Enabling Technology (NEET) Advanced Sensors and Instrumentation (ASI) in-pile instrumentation development activities are focused upon addressing cross-cutting needs for DOE-NE irradiation testing by providing higher fidelity, real-time data, with increased accuracy and resolution from smaller, compact sensors that are less intrusive. Ultrasonic technologies offer the potential to measure a range of parameters, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes, under harsh irradiation test conditions. There are two primary issues associated with in-pile deployment of ultrasonic sensors. The first is transducer survivability. The ability of ultrasonic transducer materials to maintain their useful properties during an irradiation must be demonstrated. The second issue is signal processing. Ultrasonic testing is typically performed in a lab or field environment, where the sensor and sample are accessible. Due to the harsh nature of in-pile testing, and the range of measurements that are desired, an enhanced signal processing capability is needed to make in-pile ultrasonic sensors viable. This project addresses these technology deployment issues.

  18. Permit trading and credit trading

    DEFF Research Database (Denmark)

    Boom, Jan-Tjeerd; R. Dijstra, Bouwe

    This paper compares emissions trading based on a cap on total emissions (permit trading) and on relative standards per unit of output (credit trading). Two types of market structure are considered: perfect competition and Cournot oligopoly. We find that output, abatement costs and the number...... of firms are higher under credit trading. Allowing trade between permit-trading and credit-trading sectors may increase in welfare. With perfect competition, permit trading always leads to higher welfare than credit trading. With imperfect competition, credit trading may outperform permit trading....... Environmental policy can lead to exit, but also to entry of firms. Entry and exit have a profound impact on the performance of the schemes, especially under imperfect competition. We find that it may be impossible to implement certain levels of total industry emissions. Under credit trading several levels...

  19. Joint tests at INL and CEA of a transient hot wire needle probe for in-pile thermal conductivity measurement

    International Nuclear Information System (INIS)

    Daw, J.E.; Knudson, D.L.; Villard, J.F.; Liothin, J.; Destouches, C.; Rempe, J.L.; Matheron, P.; Lambert, T.

    2015-01-01

    Thermal conductivity is a key property that must be known for proper design, testing, and deployment of new fuels and structural materials in nuclear reactors. Thermal conductivity is highly dependent on the physical structure, chemical composition, and the state of the material. Typically, thermal conductivity changes that occur during irradiation are currently measured out-of-pile using a 'cook and look' approach. But repeatedly removing samples from a test reactor to make measurements is expensive, has the potential to disturb phenomena of interest, and only provides understanding of the sample's end state when each measurement is made. There are also limited thermo-physical property data available for advanced fuels; and such data are needed for simulation codes, the development of next generation reactors, and advanced fuels for existing nuclear plants. Being able to quickly characterize fuel thermal conductivity during irradiation can improve the fidelity of data, reduce costs of post-irradiation examinations, increase understanding of how fuels behave under irradiation, and confirm or improve existing thermal conductivity measurement techniques. This paper discusses efforts to develop and evaluate an innovative in-pile thermal conductivity sensor based on the transient hot wire thermal conductivity method (THWM), using a single needle probe (NP) containing a line heat source and thermocouple embedded in the fuel. The sensor that has been designed and manufactured by the Idaho National Laboratory (INL) includes a unique combination of materials, geometry, and fabrication techniques that make the hot wire method suitable for in-pile applications. In particular, efforts were made to minimize the influence of the sensor and maximize fuel hot-wire heating. The probe has a thermocouple-like construction with high temperature resistant materials that remain ductile while resisting transmutation and materials interactions. THWM-NP prototypes were

  20. Joint tests at INL and CEA of a transient hot wire needle probe for in-pile thermal conductivity measurement

    Energy Technology Data Exchange (ETDEWEB)

    Daw, J.E.; Knudson, D.L. [Idaho National Laboratory, Idaho Falls, ID 83415, (United States); Villard, J.F.; Liothin, J.; Destouches, C. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France); Rempe, J.L. [Rempe and Associates, LLC, Idaho Falls, ID, 83404 (United States); Matheron, P. [CEA, DEN, DEC, Uranium Fuels Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France); Lambert, T. [CEA, DEN, DEC, Innovative Fuel Design and Irradiation Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France)

    2015-07-01

    Thermal conductivity is a key property that must be known for proper design, testing, and deployment of new fuels and structural materials in nuclear reactors. Thermal conductivity is highly dependent on the physical structure, chemical composition, and the state of the material. Typically, thermal conductivity changes that occur during irradiation are currently measured out-of-pile using a 'cook and look' approach. But repeatedly removing samples from a test reactor to make measurements is expensive, has the potential to disturb phenomena of interest, and only provides understanding of the sample's end state when each measurement is made. There are also limited thermo-physical property data available for advanced fuels; and such data are needed for simulation codes, the development of next generation reactors, and advanced fuels for existing nuclear plants. Being able to quickly characterize fuel thermal conductivity during irradiation can improve the fidelity of data, reduce costs of post-irradiation examinations, increase understanding of how fuels behave under irradiation, and confirm or improve existing thermal conductivity measurement techniques. This paper discusses efforts to develop and evaluate an innovative in-pile thermal conductivity sensor based on the transient hot wire thermal conductivity method (THWM), using a single needle probe (NP) containing a line heat source and thermocouple embedded in the fuel. The sensor that has been designed and manufactured by the Idaho National Laboratory (INL) includes a unique combination of materials, geometry, and fabrication techniques that make the hot wire method suitable for in-pile applications. In particular, efforts were made to minimize the influence of the sensor and maximize fuel hot-wire heating. The probe has a thermocouple-like construction with high temperature resistant materials that remain ductile while resisting transmutation and materials interactions. THWM-NP prototypes were

  1. What Is Emissions Trading?

    Science.gov (United States)

    Learn the basics about how emissions trading uses a market-based policy tool used to control large amounts of pollution emissions from a group of sources in order to protect human health and the environment.

  2. Thermal and in-pile densification of MOX fuels: Some recent results

    International Nuclear Information System (INIS)

    Caillot, L.; Malgouyres, P.P.; Souchon, F.; Gotta, M.J.; Warin, D.; Chotard, A.; Couty, J.C.

    1997-01-01

    In-pile densification of PWR fuels is one of the main phenomena which determine the evolution of the pellet-clad gap during the first stage of the irradiation, and thus has consequences onto the thermo-mechanical behaviours of fuel rods. It can be predicted using the results of resintering tests and appropriate correlations. In this context, CEA, FRAMATOME and EDF have undertaken a joint research programme aiming to characterize the densification of MOX fuels. Different fuels were prepared by the MIMAS process using different UO 2 powders as matrix. After a detailed characterization, fuel pellets were submitted to isothermal resintering tests and analytical irradiations. Correlations between in-pile and thermal densification were established. This paper presents the results obtained with two types of MOX fuel: one fabricated wit the AUC UO 2 powder (ammonium uranyl carbonate conversion process) and another one fabricated with the SFEROX powder (peroxide conversion process). 8 refs, 8 figs

  3. In-pile cladding tests at NRI Rez and PIE capabilities and experience

    International Nuclear Information System (INIS)

    Zmitko, M.

    2002-01-01

    In-pile cladding corrosion test facilities and relevant post-irradiation capabilities at NRI Rez plc are overviewed. Basic information about the research rector LVR-15 and in-pile water loops is given. An experience in the field of Zr-alloy cladding corrosion testing and investigation of cladding corrosion behaviour is demonstrated for two experimental programmes conducted at NRI Rez in the past period. The first example describes results obtained at studying of corrosion behaviour of advanced Zr-alloys under PWR conditions with a special concern to a high lithium content and subcooled surface boiling. The second example informs about completion of the experimental programme supported by the IAEA which is focused on investigation of Zircaloy-4 cladding behaviour under VVER water chemistry, thermal-hydraulic and irradiation conditions with the main to obtain experimental data for an assessment of the Zircaloy-4 cladding compatibility with VVER conditions. (author)

  4. Manufacturing and performance tests of in-pile creep measuring machine of zirconium alloys

    International Nuclear Information System (INIS)

    Choi, Y.; Kim, B. G.; Kang, Y. H.

    2000-01-01

    A mock-up of the in-pile creep test machine of zirconium alloys for HANARO was designed and manufactured, which performance tests were carried. The dimension of the in-pile creep machine is 55 mm in diameter and 700 mm in length for HANARO, respectively. Load is transferred to specimen by through the working mechanisms in which the contraction of bellows by gas pressure moves a yoke and an upper grip connected to a specimen, simultaneously. It was observed that the extension of the specimen mounted in grips was transferred to a linear voltage differential transformer perfectly by a yoke and a push rod in a bearing. The displacement of specimen with applied pressure was determined with the LVDT and a pressure gauge, respectively. Resultant stress-strain behaviors of the specimen was determined by the displacement-applied gas pressure curve, which showed similar values obtained with a standard tensile test machine

  5. In-pile vapor pressure measurements on UO2 and (U,Pu)O2

    International Nuclear Information System (INIS)

    Breitung, W.; Reil, K.O.

    1985-08-01

    The Effective-Equation-of-State (EEOS) experiments investigated the saturation vapor pressures of ultra pure UO 2 , reactor grade UO 2 , and reactor grade (Usub(.77)Pusub(.23))O2 using newly developed in-pile heating techniques. For enthalpies between 2150 and 3700 kJ/kg (about 4700 to 8500 K) vapor pressures from 1.3 to 54 MPa were measured. The p-h curves of all three fuel types were identical within the experimental uncertainties. An assessment of all published p-h measurements showed that the p-h saturation curve of UO 2 appears now well established by the EEOS and the CEA in-pile data. Using an estimate for the heat capacity of liquid UO 2 , the in-pile results were also compared to earlier p-T measurements. The assessments lead to proposal of two equations. Equation I, which includes a factor-of-2 uncertainty band, covers all p-T equilibrium evaporation measurements. Equation I yields 3817 K for the normal boiling point, 415.4 kJ/mol for the corresponding heat of vaporization, and 1.90 MPa for the vapor pressure at 5000 K. Equations I and II, which represent a parametric form of the p-h curve (T=parameter), also give a good description of the EEOS and CEA in-pile data. Thus the proposed equations allow a consistent representation of both p-T and p-h measurements, they are sufficiently precise for CDA analyses and cover the whole range of interest (3120-8500 K, 1400-3700 kJ/kg). (orig./HP) [de

  6. Thermal and mechanical analyses for the HCPB Submodules in-pile test

    Energy Technology Data Exchange (ETDEWEB)

    Bakker, K. [Fuels, Actinides and Isotopes, Nuclear Research and Consultancy Group NRG, Netherlands Energy Research Foundation ECN, Petten (Netherlands)

    1998-12-01

    A description is given of the Finite Element Method (FEM) and thermal and mechanical computations that have been performed for the Helium Cooled Pebble Bed (HCPB) Submodules in-pile tests, which have been planned for irradiation in the High Flux Reactor (HFR) at Petten. In this test, four submodules will be placed at core position H4. The report presents the temperature and stress distribution for the highest powered submodule of these four submodules. 9 refs

  7. Design of in-pile section monitoring system in fuel test loop

    Energy Technology Data Exchange (ETDEWEB)

    Sim, B. S.; Park, K. N.; Park, S. K.; Chi, D. Y.; Lee, J. M.; Ahn, S. H.; Lee, C. Y.; Kim, Y. J. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2005-07-01

    In this paper a brief summary of the monitoring system of In-Pile Section(IPS) is described. To meet the user requirements on the test fuel and irradiation conditions, various instruments are installed on the test fuel pin itself and the appropriate locations in IPS. The requirements and descriptions for instruments, gas supply system, and the data acquisition system to sample and record parameters are described.

  8. Design and performance evaluation of a cryogenic condenser for an in-pile experiment

    Science.gov (United States)

    Graham, R. W.; Crum, R. J.; Hsu, Y.

    1972-01-01

    An apparatus was designed to enable in-pile irradiation of materials in liquid hydrogen at cryogenic temperatures. One of the principal components of this apparatus was a horizontal tube condenser. The performance of the condenser was evaluated by running a liquid-nitrogen prototype of the apparatus at heat loads comparable to or greater than those expected during the irradiation. The test showed that the condenser was capable of handling the design heat load and that the design procedure was sound.

  9. In-pile irradiation test program and safety analysis report of the KAERI fuel for HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Wan; Ryu, Woo Suck; Byun, Taek Sang; Park, Jong Man; Lee, Byung Chul; Kim, Hack No; Park, Hee Tae; Kim, Chang Kyu [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-05-01

    Localization of HANARO fuel has been carried out successfully, and design and fabrication technologies of the fuel are recently arrived the final stage of development. The performance of the fuel which has been fabricated in KAERI is confirmed through out-of-pile characterization, and the quality assurance procedure and assessment criteria are described. In order to verify the KAERI fuel, thus, in-pile irradiation test program of the KAERI fuel is scheduled in HANARO. This report summarizes the in-pile testing schedule, design documents of test rods and assemblies, fabrication history and out-of-pile characteristics of test rods, irradiation test condition and power history, post-irradiation examination scheme, linear power generation distribution, and safety analysis results. The design code for HANARO fuel is used to analyze the centerline temperature and swelling of the KAERI fuels. The results show that at 120 kW/m of linear power the maximum centerline temperature is 267 deg C which is much lower than the limitation temperature of 350 deg C, and that the swelling is 9.3 % at 95 at% lower than criterion of 20 %. Therefore, the KAERI fuels of this in-pile irradiation test is assessed to show good performance of integrity and safety in HANARO. 10 tabs., 7 figs., 3 refs. (Author).

  10. Evaluation of results from an in-pile creep test in the Studsvik R2 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Pettersson, Kjell [Entropy Materials, Stockholm (Sweden)

    2002-01-01

    An in-pile creep test with bowing of cladding tubes has been performed in a hot water loop in the Studsvik R2 reactor . One test was performed in the core and one outside the core. The out-of-pile sample showed some minor primary creep strain while the in-pile specimen deformed at a steady rate of 5x10{sup -7}/h . However, when the results were compared to a broader data base of Zircaloy in-pile creep it became clear that the creep deformation observed is a primary creep which occurs before the irradiation creep in Zircaloy reaches a constant steady state creep rate. This primary stage is interpreted as a consequence of the development of an irradiation induced microstructure in Zircaloy which does not reach a steady state until a dose of about 10{sup 21} n/cm{sup 2} . At this stage the steady state irradiation creep starts. From this interpretation it is concluded that it is quite feasible to use the test method on pre-irradiated material in which it can be expected that the steady state will be reached already after short irradiation times.

  11. Vanadium—lithium in-pile loop for comprehensive tests of vanadium alloys and multipurpose coatings

    Science.gov (United States)

    Lyublinski, I. E.; Evtikhin, V. A.; Ivanov, V. B.; Kazakov, V. A.; Korjavin, V. M.; Markovchev, V. K.; Melder, R. R.; Revyakin, Y. L.; Shpolyanskiy, V. N.

    1996-10-01

    The reliable information on design and material properties of self-cooled Li sbnd Li blanket and liquid metal divertor under neutron radiation conditions can be obtained using the concept of combined technological and material in-pile tests in a vanadium—lithium loop. The method of in-pile loop tests includes studies of vanadium—base alloys resistance, weld resistance under mechanical stress, multipurpose coating formation processes and coatings' resistance under the following conditions: high temperature (600-700°C), lithium velocities up to 10 m/s, lithium with controlled concentration of impurities and technological additions, a neutron load of 0.4-0.5 MW/m 2 and level of irradiation doses up to 5 dpa. The design of such an in-pile loop is considered. The experimental data on corrosion and compatibility with lithium, mechanical properties and welding technology of the vanadium alloys, methods of coatings formation and its radiation tests in lithium environment in the BOR-60 reactor (fast neutron fluence up to 10 26 m -2, irradiation temperature range of 500-523°C) are presented and analyzed as a basis for such loop development.

  12. A probabilistic safety assessment of in-pile test loop in HWRR

    International Nuclear Information System (INIS)

    Cao Xuewu; Li Zhaohuan

    1991-07-01

    The PSA methodology has been applied to the in-pile test loop which is installed in the Heavy Water Research Reactor (HWRR). This loop is designed and operated for fuel assembly testing of the Qinshan PWR plant. This analysis is to assess the safety and to evaluate the design of this operating loop. The procedure and models are similar to a PSA on nuclear power plant. The major contents in the analysis consist of the familiarization of the object, the investigation and selection of accident initiators, setting events and fault trees, data collections, quantitative calculations, qualitative and result analyses and final conclusion. This analysis is only limited to the initiators of in-pile loop itself and possible errors made by operators during normal operation. The accident occurence is less than 10 -4 a -1 which may be recommended as an acceptance risk for safety operation of an in-pile test loop. Finally, suggestions have been raised to improve the design of test loop, especially in reducing operation errors by local operators

  13. Insider trading

    International Nuclear Information System (INIS)

    Maslechko, W.S.

    1998-01-01

    The policy arguments for and against prohibiting insider trading within the petroleum industry are discussed. Legal definitions of all relevant terms (e.g. 'special relationship' 'tippees', 'material facts', material changes' 'generally disclosed' information', 'necessary course of business') are provided. Enforcement of insider trading/tipping prohibitions are also defined. The recommended practice is: do not trade; do not tell or advise; encourage timely disclosure; do not speculate; implement a corporate disclosure and trading policy

  14. Energy trading

    International Nuclear Information System (INIS)

    Glachant, J.M.; Kimman, R.; Schweickardt, H.E.

    2001-05-01

    This document brings together 18 testimonies of experts about energy trading: 1 - the energy trading experience on European deregulated markets: structure of deregulated energy markets in Europe, case study: a two years experience of a power exchange in western Europe, case study: European energy exchanges (experience of spot and future trading), case study: risk management on energy deregulated markets; 2 - the trading activity environment and realities in France: the French electrical law and the purchase for resale, experience feedback: status after 3 months of trading in France (the first experience of a French producer), the access to the power transportation network, which legal constraints for trading in France, the access of eligible clients to the French power market, conditions of implementation of a power exchange market in France, which real trading possibilities in France for producers and self-producers in the legal frame, case study: the role of trading in the company (main part or link to process), convergence of gas and electricity markets, gas-electricity trading: which pricing models; 3 - risk management and use of new technologies potentiality, the results outside the French borders: case study: what differences between the European and US markets, prices volatility and commodity risk management: towards the on-line trading, role and developments of E-business in energy trading, how to simplify trade in a liberalized market. (J.S.)

  15. The strategic trade-offs for beneficial open innovation : the case of ''open source'' consortia in mobile OS development

    NARCIS (Netherlands)

    Querbes, A.

    2011-01-01

    The trivialization of smartphones has given rise to an architectural reconfiguration of the mobile operating system innovation process. We have also seen the recent emergence of three ?open source? consortia: the Symbian and LiMo Foundations, and the Open Handset Alliance. In this exploratory paper,

  16. The Cultural Trade Index : An Introduction

    OpenAIRE

    Kabanda, Patrick

    2016-01-01

    The Cultural Trade Index aims to shed light on cultural trade and stimulate interest in how this little-known area can contribute to economic diversification, boost shared prosperity, and reduce extreme poverty. As the first index of its kind, the Cultural Trade Index would gather cultural trade data scattered across different sources, place them in one place, and show how countries are pe...

  17. Energy trading

    International Nuclear Information System (INIS)

    Beckmann, K.; Schroeter, S.

    2009-01-01

    Two brief articles and two interviews deal with the subject of energy trading. Power and gas exchanges in Europe multiply, but, experts say, we are nowhere near a mature, integrated European energy market as yet. Trading regulations need to be improved and harmonised and interconnections expanded. European Energy Review assesses the state of energy trading in Europe and interviews the ceo's of NordPool (the Nordic power exchange) and APX (Amsterdam Power Exchange)

  18. In-pile creep test technique for zirconium alloys examination in BR-10 reactor channels

    International Nuclear Information System (INIS)

    Pevchikh, Yu.M.; Kruglov, A.S.; Troyanov, V.M.

    2002-01-01

    The irradiation enhanced creep phenomenon was discovered in stainless steels as a specific physical process accompanying high-intensity neutron flux irradiation in fast reactors. IPPE is also experienced in irradiation creep test activities, studying different types of materials under irradiation in BR-10 fast reactor. Series of in-channel type test facilities were constructed and tested in BR-10 reactor's 'dry' channels in order to carry out full-scale instrumented examination regarded to in-pile creep behaviour of different reactor materials. As a result, a specific test technique, named 'Tensometric method', has been developed and experimentally proved to be power enough in order to investigate irradiation creep of materials right in situ under neutron irradiation. The main peculiarity of test facility, which is constructed to apply the tensometric method, consists in absence of any special deformation-measurement cell at all. The in-pile creep strain measurement technique developed at IPPE is based on the non-direct measurement of specimen's deformation (either linear tensile strain or angular twisting one), which directly affects the loaded draws' tension parameters. Starting from 1993, in-pile creep experiments to investigate in-reactor creep behaviour of E110 and E635 zirconium alloys were carried out in BR-10. Experimental results and data collected during more than 20-year of BR-10 in-reactor creep test experience can be assumed as a strong evidence that the tensometric technique is a powerful instrument, which can give a chance to study different irradiation effects on reactor materials directly under irradiation. (author)

  19. Thermal conductivity of sintered UO2 under in-pile conditions

    International Nuclear Information System (INIS)

    Stora, J.P.; Bernardy De Sigoyer, B.; Delmas, R.; Deschamps, P.; Lavaud, B.; Ringot, C.

    1964-01-01

    The temperature distribution in a stack of sintered UO 2 cylinders has been studied both in the laboratory where the heat energy is produced by an axial heating element, and in-pile, where the heating is due solely to nuclear effects. Under a high thermal gradient the UO 2 cracks both along radial planes and along pseudo-cylindrical surfaces: these latter act as thermal barriers to the heat flow, It is therefore an apparent thermal conductivity k a (T), lower than the intrinsic value k(T) of this parameter which is measured. The efficiency of these barriers decreases when the gap decreases and when the external pressure acting on the cracked stack increases: in the limiting case, for high values of the binding strain, k a (T) ≅ k(T). In the domain of phonon conduction (T ≤ 1350 deg C), the expression kw.cm -1 .C -1 =1/(11+0.024*T) accounts for the real thermal conductivity. Above 1350 deg C the thermal conductivity increases. Two in-pile measurements up to 1250 deg C carried out using cartridges fitted with thermocouples confirm, within the limits of experimental error, the above expression and the qualitative effects of the binding strains. Similar tests have been carried out-of-pile and in-pile on the real shape of the EL-4 fuel 'pencils'. Out-of-pile, the influence of the initial free gap, of the nature of the gas filing the 'pencil' and of the external pressure have been studied; the results are compatible with the above interpretation; It appears that an external pressure of 60 kg/cm 2 is insufficient to restore completely the thermal conductivity of the fuel. (authors) [fr

  20. Trading Agents

    CERN Document Server

    Wellman, Michael

    2011-01-01

    Automated trading in electronic markets is one of the most common and consequential applications of autonomous software agents. Design of effective trading strategies requires thorough understanding of how market mechanisms operate, and appreciation of strategic issues that commonly manifest in trading scenarios. Drawing on research in auction theory and artificial intelligence, this book presents core principles of strategic reasoning that apply to market situations. The author illustrates trading strategy choices through examples of concrete market environments, such as eBay, as well as abst

  1. Data collection for the methods of in-pile materials testing

    International Nuclear Information System (INIS)

    Markina, N.V.; Rudkevich, A.V.; Lebedeva, E.E.

    1985-01-01

    Problems, relating to the creation of automated data banks intended for accumulatioon and systematization of data according to the methods of in-pile materials testing, taking into account their specific nature are discussed. The architecture of the bank, realized on the BESM-6 computer is described. The bank contains data on about 300 methods. The library of requests, which may be used by a user comprises about 20 descriptions. A new request description preparation and input take 5-20 min. The system answering time is from 30 sec to 3-4 min

  2. Theoretical interpretation of SCARABEE single pin in-pile boiling experiments

    International Nuclear Information System (INIS)

    Struwe, D.; Bottoni, M.; Fries, W.; Elbel, H.; Angerer, G.

    1977-01-01

    In the framework of LMFBR safety analysis a theoretical interpretation of some of the most representative of the single pin experiments of the in-pile SCARABEE project has been performed from both viewpoints of thermohydraulic and fuel behaviour using the computer codes CAPRI-2 and SATURN-1. The analysis is aimed at investigating the pin behavior from the preirradiation history, through the observed sequence of events following a coolant mass flow reduction from boiling inception up to pin breakdown. A comparison of theoretical results with experimentally recorded data has allowed a deeper insight into the peculiar features of the experiments and enabled a valuable code verification. (Auth.)

  3. In-pile intragranular densification of oxide fuels (AWBA Development Program)

    International Nuclear Information System (INIS)

    Dollins, C.C.; Nichols, F.A.

    1977-10-01

    This report proposes a model to describe in-pile densification of oxide fuels, by both vacancy boil-off due to thermal excitation and vacancy knockout by the passage of fission fragments through the pores. The model includes the migration rates of both vacancies and interstitials to pores and the production of vacancy-rich damage cascades by fission fragments. It has been coupled with a previously reported swelling and gas release model so that it can predict the total dimensional changes of the fuel as well as predicting intragranular densification for both ThO 2 and UO 2 fuels for advanced water breeder reactor applications development effort

  4. In-pile tests of HTGR fuel particles and fuel elements

    International Nuclear Information System (INIS)

    Chernikov, A.S.; Kolesov, V.S.; Deryugin, A.I.

    1985-01-01

    Main types of in-pile tests for specimen tightness control at the initial step, research of fuel particle radiation stability and also study of fission product release from fuel elements during irradiation are described in this paper. Schemes and main characteristics of devices used for these tests are also given. Principal results of fission gas product release measurements satisfying HTGR demands are illustrated on the example of fuel elements, manufactured by powder metallurgy methods and having TRISO fuel particles on high temperature pyrocarbon and silicon carbide base. (author)

  5. Analytical out-of-pile and in-pile experiments on gadolinia bearing fuels

    International Nuclear Information System (INIS)

    Bruet, M.; Francois, B.; Do, Q.; Bergeron, J.; Trotabas, M.

    1986-06-01

    New fuel management schemes in PWRs can be achieved through the use of burnable poisons like gadolinia bearing fuel rods. However, the introduction of such a design has required a qualification program, which has been performed in collaboration between CEA, FRAGEMA and/or FRAMATOME by specialized teams in CEA facilities. The main scoops of this program concern: the fabrication process; the out of pile physical properties determination: the in pile thermomechanical behaviour and fission product release; the neutronic studies in view to validate the Computed Gd efficiency and the LBP depletion calculation schemes and to analyse and assess various schemes of core calculations

  6. Stress analysis of primary pipe rigid support of the in pile loop

    International Nuclear Information System (INIS)

    Hasibuan, Dj.

    1998-01-01

    Base on requirement of the safety analysis report and operation planning preparation on the in pile loop by using the fuel bundle in the test section, the stress analysis of primary pipe support has been done. The analysis was performed for the 3 (three) points of pipe support, which are chosen by random selection, i.e.: GU 2001, GU 2002, and GU 2331. The analysis result showed that the maximum allowable stress was greater then the actual stress. It is concluded that the existing supports fulfil the safety requirement

  7. Irradiation technology (1). Development of new in-pile instrumentation at JMTR

    International Nuclear Information System (INIS)

    Shibata, Akira; Kimura, Nobuaki; Tanimoto, Masataka; Nakamura, Jinichi; Saito, Takashi; Tsuchiya, Kunihiko

    2012-01-01

    Development of instrumentation which can use under severe accident condition is important issue for the purpose to cope with severe accident at nuclear reactors. And also to improve the quality of irradiation tests data and to increase the reliability of safety management system of reactors, the development of new instrumentation is key issue. JAEA is developing several in-pile instrumentations to conduct irradiation tests at JMTR. This study includes the developments of three new instrumentations and describes the characteristics of the instrumentations. These are ECP sensor, new water level indicator and in-reactor observation system using Cherenkov light. (author)

  8. In pile measurement of creep rate of stainless steel cladding tubes for fast reactor pins

    International Nuclear Information System (INIS)

    Calza Bini, A.; Cosoli, G.; Filacchioni, G.; Lanchi, M.; Nobili, A.; Pesce, E.; Rocca, U.V.; Rotoloni, P.L.

    1975-01-01

    Results are reported of a direct in pile measurement of creep on a cladding sample of 10cm length, under tensile stress of 22.82kg/mm 2 at a temperature of 550 0 during about 500 hours, up to an integrated flux of 2.6.10 20 n/cm 2 . Two identical samples were irradiated in the same temperature and flux conditions to be submitted to out of pile creep measurements together with other unirradiated samples. The aim of this first experiment was mainly to set up the device and to evaluate the kind and the quality of the available data

  9. The in-pile proving test for fuel assembly of Qinshan nuclear power plant

    International Nuclear Information System (INIS)

    Chen Dianshan; Zhang Shucheng; Kang Rixin; Wang Huarong; Chen Guanghan

    1989-10-01

    The in-pile proving test for fuel assembly of Qinshan nuclear power plant had been conducted in the experimental loop of HWRR at IAE (Institute of Atomic Energy) in Beijing, China, from January 1985 to December 1986. Average burnup of 27000 MWd/tU and peak burnup of 34000 MWd/tU of fuel rod had already been reached. The basic status of the experiment are described, emphasis is placed on the discussion of proving test parameters and analysis of experiment results

  10. Safety analysis report for packaging: the ORNL in-pile capsule shipping cask

    International Nuclear Information System (INIS)

    Evans, J.H.; Chipley, K.K.; Haynie, C.B.; Crowley, W.K.; Just, R.A.

    1977-11-01

    The ORNL in-pile capsule shipping cask is used to transport irradiated experimental capsules and spent fuel elements. The cask was analytically evaluated to determine its compliance with the applicable regulations governing containers in which radioactive materials are transported. Computational procedures were used to determine the structural integrity and thermal behavior of the cask relative to the general standards for normal conditions of transport and the standards for the hypothetical accident conditions. The results of the evaluation show that the cask is in compliance with the applicable regulations

  11. Renewable Energy Sources Act and Trading of Emission Certificates: A national and a supranational tool direct energy turnover to renewable electricity-supply in Germany

    International Nuclear Information System (INIS)

    Kirsten, Selder

    2014-01-01

    Aim: After the nuclear disaster at Fukushima in 2011, Germany decided to phase out atomic energy, without producing new CO 2 emissions. The article discusses the promotion systems that are used. Scope: The percentage of renewable energies in Germany's electricity consumption increased from 3 in 1990 to 23 in 2012. This development was introduced and guided by a law called Renewable Energy Sources Act. It guarantees a privileged acceptance of electricity and a fixed gratification for 20 years to the operators of regenerative power plants. It allows the operators to install regenerative power plants at a reduced risk. By contrast, the international means for CO 2 reduction is the trading of emission certificates, which is also valid for Germany. The article discusses how the promotion of the Erneuerbar-Energien-Gesetz (EEG) and other plant-based promotion systems fit into this condition. It also elucidates the actual decline of promotion, its problems to the country’s environmental economy and the approach of decentralized photovoltaic (PV) energy plants towards economical efficiency. Conclusions: Germany’s energy turnaround to a regenerative energy supply is characterized by a strong and differentiated promotion system. Substantial efforts have to be made as the percentage of the renewable energy sources has significantly increased but is still under 25%

  12. Emissions Trading

    NARCIS (Netherlands)

    Woerdman, Edwin; Backhaus, Juergen

    2014-01-01

    Emissions trading is a market-based instrument to achieve environmental targets in a cost-effective way by allowing legal entities to buy and sell emission rights. The current international dissemination and intended linking of emissions trading schemes underlines the growing relevance of this

  13. Organ Trade

    NARCIS (Netherlands)

    J.A.E. Ambagtsheer (Frederike)

    2017-01-01

    markdownabstractOrgan trade constitutes the sale and purchase of organs for financial or material gain. Although prohibited since the 1980s, an increasing number of reports indicate its proliferation across the globe. Yet, many knowledge gaps exist on organ trade, in particular on the demand -and

  14. Research on in-pile release of fission products from coated particle fuels

    International Nuclear Information System (INIS)

    Fukuda, K.; Iwamoto, K.

    1985-01-01

    Coated particle fuels fabricated in accordance with VHTR (Very High Temperature gas-cooled Reactor) fuel design have been irradiated by both capsules and an in-pile gas loop (OGL-1), and data on the fission products release under irradiation were obtained for loose coated particles, fuel compacts and fuel rods in the temperature range between 800 deg. C and 1600 deg. C. For the fission gases, temperature- and time dependences of the fractional release(R/B) were measured. Relation between release and failure fraction of the coated particles was elucidated on the VHTR reference fuels. Also measured was tritium concentration in the helium coolant of OGL-1. In-pile release behavior of the metallic fission products was studied by measuring the activities of the fission products adsorbed in the graphite sleeves of the OGL-1 fuel rods and the graphite fuel container of the sweep gas capsules in the PIE. Investigation on palladium interaction with SiC coating layer was included. (author)

  15. Concept and basic performance of an in-pile experimental reactor for fast breeder reactors using fast driver core

    International Nuclear Information System (INIS)

    Obara, Toru; Sekimoto, Hiroshi

    1997-01-01

    The possibility of an in-pile experimental reactor for fast breeder reactors using a fast driver core is investigated. The driver core is composed of a particle bed with diluted fuel. The results of various basic analyses show that this reactor could perform as follows: (1) power peaking at the outer boundary of test core does not take place for large test core; (2) the radial power distribution in test fuel pin is expected to be the same as a real reactor; (3) the experiments with short half width pulse is possible; (4) for the ordinary MOX core, enough heating-up is possible for core damage experiments; (5) the positive effects after power burst can be seen directly. These are difficult for conventional thermal in-pile experimental reactors in large power excursion experiments. They are very attractive advantages in the in-pile experiments for fast breeder reactors. (author)

  16. Capsule development and utilization for material irradiation tests; study on the in-pile creep measuring method of zirconium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yong; Lee, Byung Kee; Lee, Jong Jea; Kim, Chang Sik; Kim, B. Hun; Cho, I. Sik [Sunmoon University, Asan (Korea)

    2002-02-01

    The final objective of this project is to obtain a design and fabrication technology of an in-pile creep test machine of zirconium alloys. First, design concepts of the in-pile creep test machines of various foreign countries were reviewed and a preliminary design of the equipment was carried. Second, the mock-up of the in-pile creep test machine was fabricated based on the preliminary design. The mock-up consisted of upper and lower grips, a yoke, a pressure chamber including a bellows, a push rod and LVDT. Each part was made of 304 L stainless steel. The average surface roughness of the parts was 1.0-14.7 {mu}m. The mock-up precisely determined an extension of a specimen by gas pressure. Finally, in-pile creep capsule was designed, fabricated and modified. High pure aluminum blocks were put in the capsule. Considering heat transfer coefficients of helium and nitrogen gases, the cooling efficiency is about 4 .deg. C at the condition of 300 .deg. C creep test. Yield strength, ultimate tensile strength and elongation at 300 .deg. C were 335 MPa, 591 MPa, 19.8%, respectively. which were lower than the values at room temperature, 353 MPa, 740 MPa, 12.5%. This study gave an important technology related to design, fabrication and performance tests of the in-pile creep test machine, which is applied to the fabrication of a special capsule and also used for the fundamental data for the fabrication of various in-pile creep capsules. 6 refs., 45 figs., 5 tabs. (Author)

  17. Results from In-pile experiments on LWR fuel rod behavior under LOCA conditions with unirradiated rods

    International Nuclear Information System (INIS)

    Sepold, L.; Karb, E.H.; Pruessmann, M.

    1981-06-01

    This report summarizes the results of the FR2-in-pile tests at KfK (Kernforschungszentrum Karlsruhe) with unirradiated test rods. The in-pile tests with the objective of investigating the influence of a nuclear environment on the mechanisms of fuel rod failure were being performed with irradiated and unirradiated single rods of a PWR design in the DK loop of the FR2 reactor. The main parameter of the test program was the burnup, ranging from 2.500 to 35.000 MWd/t. The program with unirradiated specimens comprised the series A and B with a total of 14 tests. (orig.) [de

  18. Current in-pile absorbed dose measurements at the Boris Kidric Institute of nuclear sciences - Vinca, Status report

    Energy Technology Data Exchange (ETDEWEB)

    Draganic, G I [Institute of nuclear sciences Boris Kidric, Vinca, Beograd (Yugoslavia)

    1966-11-15

    So far in-pile absorbed dose measurements have been limited only to experiments in the RA reactor at the Boris Kidric Institute of Nuclear Sciences at Vinca (6.5 D{sub 2}O moderated and 2% enriched uranium). The methods used for absorbed dose and neutron flux measurements were 1,2 discussed in some earlier reports at the IAEA meetings. The purpose of the present report is to illustrate the further development of methods of determining in-pile absorbed doses (author)

  19. Neutronic and thermal estimation of blanket in-pile mockup with Li2TiO3 pebbles

    International Nuclear Information System (INIS)

    Nagao, Y.; Nakamichi, M.; Tsuchiya, K.; Kawamura, H.

    2001-01-01

    To evaluate exactly temperature distribution in large volume of tritium breeding materials during the blanket in-pile tests with the JMTR, neutronic and thermal calculations were conducted by using Monte Carlo code 'MCNP' with nuclear cross section library of 'FSXLIBJ3R2' and the transient and steady-state distribution code 'TRUMP'. From the results of preliminary estimation of temperature distribution in the blanket in-pile mockup, the calculated values were 24-28% higher than the measured values. One of the reasons is due to overestimation of calculated thermal neutron flux

  20. Evaluation on sweep gas pressure drop in fusion blanket mock-up for in-pile test

    International Nuclear Information System (INIS)

    Ishitsuka, Etsuo; Kawamura, Hiroshi; Sagawa, Hisashi; Nagakura, Masaaki; Kanzawa, Toru.

    1993-03-01

    In the ITER/CDA (Conceptual Design Activity) of a tritium breeding blanket, Japan have proposed the pebble-typed blanket. The in-pile mock-up test will be preparing in JMTR (Japan Materials Testing Reactor) for Japanese engineering design with the pebble-typed blanket. Therefore, the He sweep gas pressure drop in the pebble bed was measured for the design of the mock-up used on in-pile test. From the results of this test, it was clear that the pressure drop was predicted on Kozeny- Carman's equation within +25 ∼ -60 %, and that the pressure drop was not affected by moisture concentration (< 100 ppm). (author)

  1. Foreign Trade

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Foreign Trade database has monthly volume and value information for US imports, exports, and re-exports of fishery or fishery derived products. Data is...

  2. In-pile loop studies of the effect of PWR coolant pH on corrosion product radionuclide deposition

    International Nuclear Information System (INIS)

    Driscoll, M.J.; Harling, O.K.; Kohse, G.E.

    1992-02-01

    An in-pile loop which simulates the primary coolant system of a PWR has been constructed and operated in the MIT research reactor. A total of seven one-month-long irradiations have been carried out to evaluate the effect of coolant pH controlled by variation in LiOH/H 3 BO 3 concentrations. With the exception of one run at zero boron, all employed 800 ppm B; pH 300degreesC values of 6.5, 7.0, 7.2, 7.5 were studied, and two runs each at 7.0 and 7.2 were carried out. Finally, one of the runs at a pH 300degreesC of 7.2 was conducted with special care to exclude zinc because of its potential effects on cobalt deposition. The results show the expected benefits of high pH in reducing the rate of activity deposition on plant surfaces, but pH 300degreesC = 7.2 is approximately as effective as 7.5, while pH 300degreesC = 6.5 exhibits much larger activity transport and qualitatively different deposition behavior. Significant heat flux effects not predicted by current models have been consistently observed. While not as extensively studied, the zero-boron run suggests that the presence of boron species, at fixed pH, may reduce the net amount of activity deposited on ex-core surfaces. Neutron activation analysis of a variety of samples ruled out Zircaloy as an important source of Co-60, since its cobalt content is less than one ppm, considerably less than the applicable ASTM specification of ≤ 20 ppm. Amendment of the latter has been recommended

  3. Review Report on the Design of In-Pile Test Section(IPS)

    International Nuclear Information System (INIS)

    Lee, Jong Min; Park, Kook Nam; Shim, Bong Sik; Lee, Chung Young; Chi, Dae Young; Park, Su Ki; Ahn, Sung Ho; Kim, Young Ki; Lee, Kye Hong; Kim, Kwan Hyun

    2009-01-01

    The In-Pile Test Section(IPS) accommodating fuel pins has loaded IR-1 hole in HANARO has double pressure vessel for the design conditions of 350 deg. C, 17.5 MPa and is composed of outer assembly and inner assembly. Dummy fuel, dummy fuel supports and Top flange are the main components in inner assembly and inner pressure vessel, outer pressure vessel and head are the components in outer assembly. The IPS at current status has dummy fuels and confirm the requirements for the IPS design improvements during the design, manufacturing and installation process. Head, Top Flange, Instrumentation Feed through, Lifting Eye, Fuel Carrier Leg, Retainer and Nozzle cover are the main parts that the design needs to be changed. This report suggest the needs for the IPS design modification and it would be reflected to the new IPS design which would accommodating test fuel pins

  4. Integrated, digital experiment transient control and safety protection of an in-pile test

    International Nuclear Information System (INIS)

    Thomas, R.W.; Whitacre, R.F.; Klingler, W.B.

    1982-01-01

    The Sodium Loop Safety Facility experimental program has demonstrated that in-pile loop fuel failure transient tests can be digitally controlled and protected with reliability and precision. This was done in four nuclear experiments conducted in the Engineering Test Reactor operated by EG and G Idaho, Inc., at the Idaho National Engineering Laboratory. Loop sodium flow and reactor power transients can be programmed to sponsor requirements and verified prior to the test. Each controller has redundancy, which reduces the effect of single failures occurring during test transients. Feedback and reject criteria are included in the reactor power control. Timed sequencing integrates the initiation of the controllers, programmed safety set-points, and other experiment actions (e.g., planned scram). Off-line and on-line testing is included. Loss-of-flow, loss-of-piping-integrity, boiling-window, transient-overpower, and local fault tests have been successfully run using this system

  5. Report On Design And Preliminary Data Of Halden In-Pile Creep Rig

    Energy Technology Data Exchange (ETDEWEB)

    Terrani, Kurt A [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Karlsen, T. M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yamamoto, Yukinori [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-01

    A set of in-pile creep tests is ongoing in the Halden reactor on ORNL’s candidate accident tolerant fuel cladding materials. These tests are meant to provide essential material property information that is needed for an informed analysis of these fuel concepts under normal operating conditions. These tests provide detailed information regarding swelling, thermal creep, and irradiation creep rates of these materials. The results to date have been compared with the limited set of information available in literature that is form irradiation tests in other reactors or out-of-pile tests. Most of the results are in good agreement with prior literature, except for irradiation creep rate of SiC. To elucidate the difference between the HFIR and Halden test results continued testing is necessary. The tests describe in this progress report are ongoing and will continue for at least another year.

  6. In-pile study of the reaction between breeder fuel and sodium

    International Nuclear Information System (INIS)

    Hugot, J.P.

    1982-10-01

    Studies carried out until now show that the determinant parameter of fuel can failure evolution is the development of the reaction between mixed uranium and plutonium dioxide and sodium. The parameters of the reaction are presented from results of an out of pile study, as also results obtained from examination on pins failed in reactors. The best way to study in pile the development of the reaction was to irradiate at a constant power a fuel pin containing sodium. In the experiment, the pin was equipped with a central thermocouple. It shows, that the reaction is developing intergranularly, from cracks and interpellet spaces, in an internal fringe of the fuel before spreading to the periphery. An overheating of the pin is associated to the development of the reaction as also a modification of the fuel pin geometry and a reduction of the oxide [fr

  7. Characteristics of pressure control system on PWR/PHWR in pile loop facility

    International Nuclear Information System (INIS)

    Sarwani; Hendro, P.; Suwoto; Sutrisno

    1998-01-01

    PWR/PHWR in-pile loop facility is used for testing of fuel element bundle which is correspond to the condition of power reactor operation. So, this facility is designed at 150 bar of pressure and 350 o C of temperature. Pressure control system is one of the components of the facility and it is equipped with 6 electrical heaters (30 KW), water spray, pressure and temperature monitors. The characterization test of pressure control system has been carried out with operating of 2 electrical heaters (10 KW). The K eff calculation value is different 5.2% from pressure in the pressure control system can be increased to 160 bar within 27 hours. After the system pressure reached the nominal pressure, the pressure control system was in the steady state condition

  8. New in-pile water loop facility for IASCC studies at JMTR

    International Nuclear Information System (INIS)

    Tsukada, T.; Tsuji, H.; Nakajima, H.; Komori, Y.; Ito, H.

    2002-01-01

    Irradiation assisted stress corrosion cracking (IASCC) is caused by the synergistic effects of neutron and gamma radiation, residual and applied stresses and high temperature water environment on the structural materials of vessel internals. IASCC has been studied since the beginning of the 1980's and the phenomenological knowledge on IASCC is accrued extensively. However, mainly due to the experimental difficulties, data for the mechanistic understanding and prediction of failures of the specific in-vessel components are still insufficient and further well-controlled experiments are needed [1]. In recent years, efforts to perform the in-pile materials test for IASCC study have been made at some research reactors [2-4]. At JAERI, a high temperature water loop facility was designed to install at the Japan Materials Testing Reactor (JMTR) to carry out the in-core IASCC testing. This report describes an overview of design and specification of the loop facility. (authors)

  9. In-pile Hydrothermal Corrosion Evaluation of Coated SiC Ceramics and Composites

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, David [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Ang, Caen [Univ. of Tennessee, Knoxville, TN (United States); Katoh, Yutai [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Linton, Kory D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    Hydrothermal corrosion accelerated by water radiolysis during normal operation is among the most critical technical feasibility issues remaining for silicon carbide (SiC) composite-based cladding that could provide enhanced accident-tolerance fuel technology for light water reactors. An integrated in-pile test was developed and performed to determine the synergistic effects of neutron irradiation, radiolysis, and pressurized water flow, all of which are relevant to a typical pressurized water reactor (PWR). The test specimens were chosen to cover a range of SiC materials and a variety of potential options for environmental barrier coatings. This document provides a summary of the irradiation vehicle design, operations of the experiment, and the specimen loading into the irradiation vehicle.

  10. Probabilistic Modeling of Updating Epistemic Uncertainty In Pile Capacity Prediction With a Single Failure Test Result

    Directory of Open Access Journals (Sweden)

    Indra Djati Sidi

    2017-12-01

    Full Text Available The model error N has been introduced to denote the discrepancy between measured and predicted capacity of pile foundation. This model error is recognized as epistemic uncertainty in pile capacity prediction. The statistics of N have been evaluated based on data gathered from various sites and may be considered only as a eneral-error trend in capacity prediction, providing crude estimates of the model error in the absence of more specific data from the site. The results of even a single load test to failure, should provide direct evidence of the pile capacity at a given site. Bayes theorem has been used as a rational basis for combining new data with previous data to revise assessment of uncertainty and reliability. This study is devoted to the development of procedures for updating model error (N, and subsequently the predicted pile capacity with a results of single failure test.

  11. Evaluation of neutronic characteristics of in-pile test reactor for fast reactor safety research

    Energy Technology Data Exchange (ETDEWEB)

    Uto, N.; Ohno, S.; Kawata, N. [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1996-09-01

    An extensive research program has been carried out at the Power Reactor and Nuclear Fuel Development Corporation for the safety of future liquid-metal fast breeder reactors to be commercialized. A major part of this program is investigation and planning of advanced safety experiments conducted with a new in-pile safety test facility, which is larger and more advanced than any of the currently existing test reactors. Such a transient safety test reactor generally has unique neutronic characteristics that require various studies from the reactor physics point of view. In this paper, the outcome of the neutronics study is highlighted with presenting a reference core design concept and its performance in regard to the safety test objectives. (author)

  12. Review Report on the Design of In-Pile Test Section(IPS)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong Min; Park, Kook Nam; Shim, Bong Sik; Lee, Chung Young; Chi, Dae Young; Park, Su Ki; Ahn, Sung Ho; Kim, Young Ki; Lee, Kye Hong; Kim, Kwan Hyun

    2009-01-15

    The In-Pile Test Section(IPS) accommodating fuel pins has loaded IR-1 hole in HANARO has double pressure vessel for the design conditions of 350 deg. C, 17.5 MPa and is composed of outer assembly and inner assembly. Dummy fuel, dummy fuel supports and Top flange are the main components in inner assembly and inner pressure vessel, outer pressure vessel and head are the components in outer assembly. The IPS at current status has dummy fuels and confirm the requirements for the IPS design improvements during the design, manufacturing and installation process. Head, Top Flange, Instrumentation Feed through, Lifting Eye, Fuel Carrier Leg, Retainer and Nozzle cover are the main parts that the design needs to be changed. This report suggest the needs for the IPS design modification and it would be reflected to the new IPS design which would accommodating test fuel pins.

  13. ACTIV, Sandwich Detector Activity from In-Pile Slowing-Down Spectra Experiment

    International Nuclear Information System (INIS)

    Bozzi, L. and others

    1978-01-01

    1 - Nature of physical problem solved: Calculates the activities of a sandwich detector, to be used for in-pile measurements in slowing-down spectra below a few keV. The effect of scattering with energy degradation in the filter and in the detectors has been included to a first approximation. 2 - Method of solution: An iterative procedure is used: the calculation starts with a flux guess in which one assumes that each measured reactivity difference depends on the principal resonance only. The secondary resonance contribution is computed through the iterative process. For self-shielded cross-section calculations the model of Pearlstein and Weinstock (ref. 3) is used. The neutron spectrum can optionally be constant or 1/E inside each finite energy group relative to the resonance considered. 3 - Restrictions on the complexity of the problem: Maximum number of energy groups : 60

  14. State-of-the-art review of some artificial intelligence applications in pile foundations

    Directory of Open Access Journals (Sweden)

    Mohamed A. Shahin

    2016-01-01

    Full Text Available Geotechnical engineering deals with materials (e.g. soil and rock that, by their very nature, exhibit varied and uncertain behavior due to the imprecise physical processes associated with the formation of these materials. Modeling the behavior of such materials in geotechnical engineering applications is complex and sometimes beyond the ability of most traditional forms of physically-based engineering methods. Artificial intelligence (AI is becoming more popular and particularly amenable to modeling the complex behavior of most geotechnical engineering applications because it has demonstrated superior predictive ability compared to traditional methods. This paper provides state-of-the-art review of some selected AI techniques and their applications in pile foundations, and presents the salient features associated with the modeling development of these AI techniques. The paper also discusses the strength and limitations of the selected AI techniques compared to other available modeling approaches.

  15. Monitoring and Analysis of In-Pile Phenomena in Advanced Test Reactor using Acoustic Telemetry

    International Nuclear Information System (INIS)

    Agarwal, Vivek; Smith, James A.; Jewell, James Keith

    2015-01-01

    The interior of a nuclear reactor presents a particularly harsh and challenging environment for both sensors and telemetry due to high temperatures and high fluxes of energetic and ionizing particles among the radioactive decay products. A number of research programs are developing acoustic-based sensing approach to take advantage of the acoustic transmission properties of reactor cores. Idaho National Laboratory has installed vibroacoustic receivers on and around the Advanced Test Reactor (ATR) containment vessel to take advantage of acoustically telemetered sensors such as thermoacoustic (TAC) transducers. The installation represents the first step in developing an acoustic telemetry infrastructure. This paper presents the theory of TAC, application of installed vibroacoustic receivers in monitoring the in-pile phenomena inside the ATR, and preliminary data processing results.

  16. Investigation of in-pile grown corrosion films on zirconium-based alloys

    International Nuclear Information System (INIS)

    Gebhardt, O.; Hermann, A.; Bart, G.; Blank, H.; Ray, I.L.F.

    1996-01-01

    In-pile grown corrosion films on different fuel rod claddings (standard Zircaloy-4, extra low tin Zircaloy (ELS), and Zr2.5Nb) have been studied using a variety of experimental techniques. The aim of the investigations was to find out common features and differences between the corrosion layers grown on zirconium alloys having different composition. Methods applied were scanning and transmission electron microscopy (SEM, TEM), electrochemical impedance spectroscopy (EIS), and electrochemical anodization. The morphological differences have been observed between the specimens that could explain the irradiation enhancement of corrosion of Zircaloy-4. The features of the compact oxide close to the oxide/metal interface have been characterized by electrochemical methods. The relationship between the thickness of this protective oxide and the overall oxide thickness has been investigated by EIS. It was found that this relation is dependent on the location of the oxide along the fuel rod and on the corrosion rate

  17. State-of-the-art review of some artificial intelligence applications in pile foundations

    Institute of Scientific and Technical Information of China (English)

    Mohamed A. Shahin

    2016-01-01

    Geotechnical engineering deals with materials (e.g. soil and rock) that, by their very nature, exhibit varied and uncertain behavior due to the imprecise physical processes associated with the formation of these materials. Modeling the behavior of such materials in geotechnical engineering applications is complex and sometimes beyond the ability of most traditional forms of physically-based engineering methods. Artificial intelligence (AI) is becoming more popular and particularly amenable to modeling the complex behavior of most geotechnical engineering applications because it has demonstrated superior predictive ability compared to traditional methods. This paper provides state-of-the-art review of some selected AI techniques and their applications in pile foundations, and presents the salient features associated with the modeling development of these AI techniques. The paper also discusses the strength and limitations of the selected AI techniques compared to other available modeling approaches.

  18. MCNP simulation to optimise in-pile and shielding parts of the Portuguese SANS instrument.

    Science.gov (United States)

    Gonçalves, I F; Salgado, J; Falcão, A; Margaça, F M A; Carvalho, F G

    2005-01-01

    A Small Angle Neutron Scattering instrument is being installed at one end of the tangential beam tube of the Portuguese Research Reactor. The instrument is fed using a neutron scatterer positioned in the middle of the beam tube. The scatterer consists of circulating H2O contained in a hollow disc of Al. The in-pile shielding components and the shielding installed around the neutron selector have been the object of an MCNP simulation study. The quantities calculated were the neutron and gamma-ray fluxes in different positions, the energy deposited in the material by the neutron and gamma-ray fields, the material activation resulting from the neutron field and radiation doses at the exit wall of the shutter and around the shielding. The MCNP results are presented and compared with results of an analytical approach and with experimental data collected after installation.

  19. In-pile measurement of the thermal conductivity of irradiated metallic fuel

    International Nuclear Information System (INIS)

    Bauer, T.H.; Holland, J.W.

    1995-01-01

    Transient test data and posttest measurements from recent in-pile overpower transient experiments are used for an in situ determination of metallic fuel thermal conductivity. For test pins that undergo melting but remain intact, a technique is described that relates fuel thermal conductivity to peak pin power during the transient and a posttest measured melt radius. Conductivity estimates and their uncertainty are made for a database of four irradiated Integral Fast Reactor-type metal fuel pins of relatively low burnup (<3 at.%). In the assessment of results, averages and trends of measured fuel thermal conductivity are correlated to local burnup. Emphasis is placed on the changes of conductivity that take place with burnup-induced swelling and sodium logging. Measurements are used to validate simple empirically based analytical models that describe thermal conductivity of porous media and that are recommended for general thermal analyses of irradiated metallic fuel

  20. Visual observations of fuel disruption in in-pile LMFBR accident experiments

    International Nuclear Information System (INIS)

    Wright, S.A.; Mast, P.K.

    1982-01-01

    Sandia National Laboratories has been investigating initiation phase phenomena in a series of Fuel Disruption (FD) experiments since 1977. In this program high speed cinematography is used to observe fuel disruption in in-pile experiments that simulate loss of flow accidents. Thus, these experiments provide high resolution measurements of initial fuel and clad motion with prototypic materials and prototypic heating conditions. The main objective of the FD experiment is to determine the timing (relative to fuel temperature) and the mode of fuel disruption under LOF heating conditions. Observed modes of disruption include fuel swelling, solid state breakup, cracking, ejection of a molten fuel jet, slumping, and rapid expansion of small particles. Because the temperature and character of the fuel at disruption are known, disruption can be correlated with the mechanisms driving the disruption such as fuel vapor pressure, molten fuel expansion, fission gases, and impurity gases

  1. Analyses with the FSTATE code: fuel performance in destructive in-pile experiments

    International Nuclear Information System (INIS)

    Bauer, T.H.; Meek, C.C.

    1982-01-01

    Thermal-mechanical analysis of a fuel pin is an essential part of the evaluation of fuel behavior during hypothetical accident transients. The FSTATE code has been developed to provide this required computational ability in situations lacking azimuthal symmetry about the fuel-pin axis by performing 2-dimensional thermal, mechanical, and fission gas release and redistribution computations for a wide range of possible transient conditions. In this paper recent code developments are described and application is made to in-pile experiments undertaken to study fast-reactor fuel under accident conditions. Three accident simulations, including a fast and slow ramp-rate overpower as well as a loss-of-cooling accident sequence, are used as representative examples, and the interpretation of STATE computations relative to experimental observations is made

  2. Monitoring and Analysis of In-Pile Phenomena in Advanced Test Reactor using Acoustic Telemetry

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States). Dept. of Human Factors, Controls, and Statistics; Smith, James A. [Idaho National Lab. (INL), Idaho Falls, ID (United States). Dept. of Fuel Performance and Design; Jewell, James Keith [Idaho National Lab. (INL), Idaho Falls, ID (United States). Dept. of Fuel Performance and Design

    2015-02-01

    The interior of a nuclear reactor presents a particularly harsh and challenging environment for both sensors and telemetry due to high temperatures and high fluxes of energetic and ionizing particles among the radioactive decay products. A number of research programs are developing acoustic-based sensing approach to take advantage of the acoustic transmission properties of reactor cores. Idaho National Laboratory has installed vibroacoustic receivers on and around the Advanced Test Reactor (ATR) containment vessel to take advantage of acoustically telemetered sensors such as thermoacoustic (TAC) transducers. The installation represents the first step in developing an acoustic telemetry infrastructure. This paper presents the theory of TAC, application of installed vibroacoustic receivers in monitoring the in-pile phenomena inside the ATR, and preliminary data processing results.

  3. Acoustic sensor for in-pile fuel rod fission gas release measurement

    International Nuclear Information System (INIS)

    Fourmentel, D.; Villard, J. F.; Ferrandis, J. Y.; Augereau, F.; Rosenkrantz, E.; Dierckx, M.

    2009-01-01

    We have developed a specific acoustic sensor to improve the knowledge of fission gas release in Pressurized Water Reactor (PWR) fuel rods when irradiated in materials testing reactors. In order to perform experimental programs related to the study of the fission gas release kinetics, the CEA (French Nuclear Energy Commission) acquired the ability to equip a pre-irradiated PWR fuel rod with three sensors, allowing the simultaneous on-line measurements of the following parameters: - fuel temperature with a centre-line thermocouple type C, - internal pressure with a specific counter-pressure sensor, - fraction of fission gas released in the fuel rod with an innovative acoustic sensor. The third detector is the subject of this paper. This original acoustic sensor has been designed to measure the molar mass and pressure of the gas contained in the fuel rod plenum. For in-pile instrumentation, the fraction of fission gas, such as Krypton and Xenon, in Helium, can be deduced online from this measurement. The principle of this acoustical sensor is the following: a piezoelectric transducer generates acoustic waves in a cavity connected to the fuel rod plenum. The acoustic waves are propagated and reflected in this cavity and then detected by the transducer. The data processing of the signal gives the velocity of the acoustic waves and their amplitude, which can be related respectively to the molar mass and to the pressure of the gas. The piezoelectric material of this sensor has been qualified in nuclear conditions (gamma and neutron radiations). The complete sensor has also been specifically designed to be implemented in materials testing reactors conditions. For this purpose some technical points have been studied in details: - fixing of the piezoelectric sample in a reliable way with a suitable signal transmission, - size of the gas cavity to avoid any perturbation of the acoustic waves, - miniaturization of the sensor because of narrow in-pile experimental devices

  4. An In-Pile Kinetic Method for Determining the Delayed Neutron Fraction βeff

    International Nuclear Information System (INIS)

    Gilad, E.; Rivin, O.; Ettedgui, H.; Yaar, I.; Geslot, B.; Pepino, A.; Di Salvo, J.; Gruel, A.; Blaise, P.

    2014-01-01

    Delayed neutrons are of fundamental importance in the field of nuclear reactor dynamics and control. Although only a small fraction of the neutrons emitted by fission are not prompt, the knowledge of the delayed neutrons parameters is essential for transient analysis, such as startup or shutdown of the reactor, as well as for accidents analysis and control system design [1]. One of the main delayed neutron parameters used in the point reactor model equations is the effective delayed neutron fraction, which incorporates both delayed neutron spectral properties and core geometrical configuration [1,2]. Additional delayed neutron parameters include the fraction of fission neutrons emitted in each delayed group, and the delayed neutron precursors decay constants . Experimental efforts aimed at determining the value ofβ, which provide experimental support for the evaluation of delayed neutron parameters, are extremely valuable. This is due to the fact that unlike other fields in reactor physics, e.g. criticality safety or shielding, the availability of experimental data and benchmark problems for validating delayed neutron parameters and its implementation in different models is highly limited. Furthermore, the existing experimental data exhibit significant discrepancies between the different sets of parameter, which lead to substantial disparity in the analysis of kinetic experiments and reactor dynamic behavior]. In this work, a method for determining the effective delayed neutron fraction using in-pile reactivity oscillation and Fourier analysis is presented. The method is based on measurements of the reactor's power response to small periodic in-pile reactivity perturbations and utilizes Fourier analysis for reconstruction of the reactor zero power transfer function. Knowledge of the reactor transfer function enables the estimation of theβ value using multi-parameter nonlinear fit. The method accounts for higher harmonics, which are excited by the trapezoidal

  5. Use of standard reliability levels in design and safety assessment of in-pile loops

    International Nuclear Information System (INIS)

    Bogani, G.; Verre, A.; Balestreri, S.; Colombo, A.G.; Luisi, T.

    1975-01-01

    This paper describes a logic-probabilistic analysis technique for a critical design review and safety assessment of in-pile loops. The examples in this paper refer to the analysis performed for the experimental loops already constructed or under construction in the ESSOR reactor of the Joint Research Centre of Ispra, as irradiation facilities for fuel element research and development tests. The proposed technique is based on the classification into categories of components and protective device malfunctions. Such subdivision into categories was agreed upon by the Italian Safety Authority and Euratom JRC, and adopted for the safety assessment of the ESSOR reactor in-pile loops. For each category, the method makes a link with a corresponding malfunction probability range (probability level). This probability level is defined taking into account design, construction, inspection and maintenance criteria as well as periodic controls; therefore the quality level and consequently the reliability level are thus also defined. The analysis is developed in the following stages: (1) definition of the analysis object (top event) and drawing of the relative fault-tree; (2) loop design analysis and preliminary optimization based on logic criteria; (3) classification into categories of the fault-tree primary events; (4) final loop design analysis and optimization based on defined component quality requirements. Stages 2 and 4 are quite different since stage 2 mainly consists of a redundance optimization, while stage 4 acts on the component quality level in such a way that each minimum cut-set leading to the top has an acceptable probability level. During analysis development, use is made of computer codes which, among other things enable the verification of fault-tree logic makeup, the listing of the minimum cut-sets with and without event categorization, and the evaluation of each cut-set order. (author)

  6. Evaluation of the in pile performance of boron containing fuel pellets

    International Nuclear Information System (INIS)

    Jeong, Gwanyoon; Sohn, Dongseong

    2012-01-01

    The world rare earth resource are heavily concentrated in certain area and if these natural resources are weaponized by a country, we may confront serious difficulty because rare earth element gadolinium(Gd) is used as burnable poison material in some nuclear power plants (NPP) in Korea. Gd is used as a neutron absorbing material in Gd 2 O 3 form and mixed with UO 2 When boron is used as burnable poison in nuclear fuel, in fuel pellets. The burnable poison mixed in the fuel pellets is called integral burnable absorber (BA) design which differentiates it from the old separate BA design. In the old separate BA design, boron(B) was used in borosilicate glass (PYREX) form and placed in guide tubes. With the development of the concern over the availability of rare earth material Gd, B is considered as a candidate material replacing Gd for the case when the rare earth material is weaponized. However the idea for new boron BA design is integral type because the integral type BA design has several benefits over the separate BA design, such as reduction of radioactive waste, more positions for BA location, etc. 10 B absorbs a neutron and produces helium by the following reaction: 10 B + n → 7 Li + 4 He The helium produced by the nuclear reaction may cause the increase of rod internal pressure and change the gap conductivity if the significant amount of helium gas is released to the gap between the pellet and the cladding. Thus, it is necessary to investigate the in-pile behaviors of B containing pellet. However, few experiment have been carried out so far on the behavior of in-pile produced helium in UO 2 fuel pellets, especially for the cases boron compound is mixed with UO 2 In this paper, we will evaluate the production and the release of helium depending on fuel. 10 B concentration in the fuel

  7. Thermal-hydraulic calculation and analysis on helium cooled ceramic breeder pebble bed assembly for in-pile irradiation and in-situ tritium extraction

    International Nuclear Information System (INIS)

    Guo Chunqiu; Xie Jiachun; Liu Xingmin

    2013-01-01

    In-pile irradiation and in-situ tritium extraction experiment is one of associated domestic research projects in ITER special program. According to the technical requirements of in-pile irradiation experiment of helium cooled ceramic breeder (ceramic) pebble bed assembly in a research reactor, the feasibility of the design for the in-pile irradiation and in-situ tritium extraction experiment of ceramic pebble bed assembly was evaluated. By conducting thermal-hydraulic design calculation with different in-pile irradiation channels, locations and structure parameters for ceramic pebble bed assembly, a reasonable design scheme of ceramic pebble bed assembly satisfying the design requirements for in-pile irradiation was obtained. (authors)

  8. Study of In-Pile test facility for fast reactor safety research: performance requirements and design features

    Energy Technology Data Exchange (ETDEWEB)

    Nonaka, N.; Kawatta, N.; Niwa, H.; Kondo, S.; Maeda, K

    1996-12-31

    This paper describes a program and the main design features of a new in-pile safety facility SERAPH planned for future fast reactor safety research. The current status of R and D on technical developments in relation to the research objectives and performance requirements to the facility design is given.

  9. MTR and PWR/PHWR in-pile loop safety in integration with the operation of multipurpose reactor - GAS

    International Nuclear Information System (INIS)

    Suharno; Aji, Bintoro; Sugiyanto; Rohman, Budi; Zarkasi, Amin S.; Giarno

    1998-01-01

    MTR and PWR/PHWR In-Pile Loop safety analysis in integration with the operation of Multipurpose Reactor - Gas has been carried out and completed. The assessment is emphasized on the function of the interface systems from the dependence of the operation and the evaluation to the possibility of leakage or failure of the in-pile part inside the reactor pool and reactor core. The analysis is refers to the logic function of the interface system and the possibility of leakage or failure of the in-pile part inside reactor pool and reactor core to consider the integrity of the core qualitatively. The results show that in normal and in transient conditions , the interface system meet the function requirement in safe integrated operation of in-pile loop and reactor. And the results of the possibility analysis of the leakage shows that the possibility based on mechanically assessment is very low and the impact to core integrity is nothing or can be eliminated. The possible position for leakage is on the flen on which one meter above the top level of the core, therefore no influence of leakage to the core

  10. Emission trading: A discussion paper

    International Nuclear Information System (INIS)

    1992-05-01

    Emission trading is a market-based incentive program designed to control air emissions in which a cap is placed on the total quantity of pollutants allowed to be emitted in an airshed. Appropriate shares of this amount are allocated among participating emission sources, and participants can buy or sell their shares. Advantages of emission trading include its potential to achieve air emission targets at a lower cost than the traditional command and control approach, and its ability to accommodate economic growth without compromising environmental quality. A study was conducted to evaluate the potential use of emission trading programs to achieve emission reduction goals set for nitrogen oxides, volatile organic compounds (VOC), and sulfur oxides. Emission trading programs in the USA are reviewed and a set of factors important for the success of emission trading are identified. Key policy and design issues related to an emission trading program are identified, explained, and discussed. Administrative issues are then analyzed, such as legislative authority, monitoring and enforcement requirements, and trading between jurisdictions. A preliminary assessment of emission trading for control of NOx and VOC in the Lower Fraser Valley indicates that emission trading would be feasible, but legislative authority to implement such a program would have to be introduced

  11. Trading sulfur dioxide allowances

    International Nuclear Information System (INIS)

    Goldburg, C.B.; Lave, L.B.

    1992-01-01

    The 1990 Clean Air Act is aimed at generators larger than 25 MW, as these are the largest polluters. Market incentives give each source an emissions allocation but also flexibility. If a plant has lower emissions than the target, it can sell the 'surplus' emissions as allowances to plants that fail to meet the target. Only a few trades have occurred to date. Market-based incentives should lower the costs of improving environmental quality significantly. However, currently institutional dificulties hamper implementation

  12. Design modification of the in-pile test section for increase of sealing capability

    Energy Technology Data Exchange (ETDEWEB)

    Hong, J T; Ahn, S H; Joung, C Y; Jeong, H Y; Lee, J M; Sim, B S [Department of Research Reactor Utilization and Development, Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2012-03-15

    Since KAERI established the fuel test loop (FTL) at HANARO in 2009, KAERI has carried out several experiments to verify the performances of the equipment. Based on the experiments, the design modification of the In-Pile test Section (IPS) has been processed to improve some difficulties such as difficulty in ejecting the inner assembly of the IPS from the pressure vessel, difficulty of the sealing process of the cooling water, etc. At first, because the cooling water of HANARO in KAERI consists of an open-pool type, if a certain shock is generated during the disassembly process, the cooling water can be spattered out of the pool. Therefore, two jacking bolts will be added on the top flange part of the inner assembly to decrease the shock. Second, at the pressure boundary of the IPS where MI-cables go through, the brazing process has been used to seal out the cooling water. However, because the length of the IPS is up to 5.5 meters, it is too difficult and time consuming to carry out the brazing process at the end part of the IPS. Therefore, the brazing process will be replaced with the mechanical sealing structure to simplify the assembly process. (author)

  13. In-Pile Instrumentation Multi- Parameter System Utilizing Photonic Fibers and Nanovision

    Energy Technology Data Exchange (ETDEWEB)

    Burgett, Eric [Idaho State Univ., Pocatello, ID (United States)

    2015-10-13

    An advanced in-pile multi-parameter reactor monitoring system is being proposed in this funding opportunity. The proposed effort brings cutting edge, high fidelity optical measurement systems into the reactor environment in an unprecedented fashion, including in-core, in-cladding and in-fuel pellet itself. Unlike instrumented leads, the proposed system provides a unique solution to a multi-parameter monitoring need in core while being minimally intrusive in the reactor core. Detector designs proposed herein can monitor fuel compression and expansion in both the radial and axial dimensions as well as monitor linear power profiles and fission rates during the operation of the reactor. In addition to pressure, stress, strain, compression, neutron flux, neutron spectra, and temperature can be observed inside the fuel bundle and fuel rod using the proposed system. The proposed research aims at developing radiation-hard, harsh-environment multi-parameter systems for insertion into the reactor environment. The proposed research holds the potential to drastically increase the fidelity and precision of in-core instrumentation with little or no impact in the neutron economy in the reactor environment while providing a measurement system capable of operation for entire operating cycles.

  14. In-Pile Instrumentation Multi- Parameter System Utilizing Photonic Fibers and Nanovision

    International Nuclear Information System (INIS)

    Burgett, Eric

    2015-01-01

    An advanced in-pile multi-parameter reactor monitoring system is being proposed in this funding opportunity. The proposed effort brings cutting edge, high fidelity optical measurement systems into the reactor environment in an unprecedented fashion, including in-core, in-cladding and in-fuel pellet itself. Unlike instrumented leads, the proposed system provides a unique solution to a multi-parameter monitoring need in core while being minimally intrusive in the reactor core. Detector designs proposed herein can monitor fuel compression and expansion in both the radial and axial dimensions as well as monitor linear power profiles and fission rates during the operation of the reactor. In addition to pressure, stress, strain, compression, neutron flux, neutron spectra, and temperature can be observed inside the fuel bundle and fuel rod using the proposed system. The proposed research aims at developing radiation-hard, harsh-environment multi-parameter systems for insertion into the reactor environment. The proposed research holds the potential to drastically increase the fidelity and precision of in-core instrumentation with little or no impact in the neutron economy in the reactor environment while providing a measurement system capable of operation for entire operating cycles.

  15. Design Improvement of Double Pressure Vessel in the In-pile Test Section

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jintae; Heo, Sung-Ho; Joung, Chang-Young; Kim, Ka-Hye [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    To carry out an irradiation test of nuclear fuels, a nuclear fuel test rig should be fabricated and installed in the in-pile test section (IPS), which is installed in the reactor hall. While carrying out an irradiation test, sealing out coolant which passes through the test rig is one of the most important issues. In particular, although the double pressure vessel is assembled with the IPS head by two o-rings and six bolts, 15.5 MPa of highly pressurized coolant leaks through the gap between the vessel and IPS head. Because the temperature of the coolant in the test loop is 300 .deg. C , and the pool of HANARO is 40 .deg. C, the double pressure vessel is necessary to insulate them. Therefore, a new design to prevent the leakage of coolant needs to be developed. In this study, EB welding technique is considered to assemble the double pressure vessel and the IPS head, and their mechanical design is modified to enable the welding process. In this study, an improved design for sealing out the coolant at the pressure boundary between the double pressure vessel and the IPS head has been developed. An EB weld is applied to seal out the pressure boundary, and its sealing performance is verified by NDE, a cross section test, and a hydraulic pressure test. From the verification test results, the improved design can be used in fabricating the IPS for a nuclear fuel irradiation test.

  16. In-pile test results of HANA claddings in Halden research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Jong Hyuk; Choi, Byoung Kwon; Jeong, Yong Hwan; Jung, Yun Ho [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2005-07-01

    It is a kind of facing tasks in the nuclear industry to develop advanced claddings for high burn-up fuel which is safer and more economical than the existing conventional ones. Since 1997, taking an initiative in KAERI, the Zr cladding development team has carried out the R and D activities for the development of the advanced claddings to be used in the high burn-up fuel (>70,000 MWD.MTU). The team had produced the advanced claddings (HANA, High-performance Alloy for Nuclear Application) from the patented composition and manufacturing process in the international collaboration with U.S. and Japan. Now, the HANA claddings have being demonstrated their good performances from the out-of-pile tests including the corrosion, creep, burst, tensile, microstructures LOCA, RIA, wear, and so on. In parallel to the out-of-pile performance tests, the HANA claddings are being undertaken to evaluate their in-pile properties in Halden research reactor. In this study, it is included the test overviews, conditions, and results of the HANA claddings in the Halden reactor.

  17. In situ monitored in-pile creep testing of zirconium alloys

    Science.gov (United States)

    Kozar, R. W.; Jaworski, A. W.; Webb, T. W.; Smith, R. W.

    2014-01-01

    The experiments described herein were designed to investigate the detailed irradiation creep behavior of zirconium based alloys in the HALDEN Reactor spectrum. The HALDEN Test Reactor has the unique capability to control both applied stress and temperature independently and externally for each specimen while the specimen is in-reactor and under fast neutron flux. The ability to monitor in situ the creep rates following a stress and temperature change made possible the characterization of creep behavior over a wide stress-strain-rate-temperature design space for two model experimental heats, Zircaloy-2 and Zircaloy-2 + 1 wt%Nb, with only 12 test specimens in a 100-day in-pile creep test program. Zircaloy-2 specimens with and without 1 wt% Nb additions were tested at irradiation temperatures of 561 K and 616 K and stresses ranging from 69 MPa to 455 MPa. Various steady state creep models were evaluated against the experimental results. The irradiation creep model proposed by Nichols that separates creep behavior into low, intermediate, and high stress regimes was the best model for predicting steady-state creep rates. Dislocation-based primary creep, rather than diffusion-based transient irradiation creep, was identified as the mechanism controlling deformation during the transitional period of evolving creep rate following a step change to different test conditions.

  18. The design of in-pile test section for fuel test loop

    Energy Technology Data Exchange (ETDEWEB)

    Park, K. N.; Lee, J. M.; Shim, B. S.; Zee, D. Y.; Park, S. H.; Ahn, S. H.; Lee, J. Y.; Kim, Y. J. [KAERI, Taejon (Korea, Republic of)

    2004-07-01

    As an equipment for nuclear fuel's general performance irradiation test in HANARO, Fuel Test Loop(FTL) has been developed that can irradiate the pin to the maximum number of 3 at the core irradiation hole(IR1 hole) by considering for it's utility and user's irradiation requirement. 3-Pin FTL consists of In-Pile Test Section (IPS) and Out-of-Pile System (OPS). IPS consists for IPS Vessel assembly, In-Pool Piping, IPS Support, In-Pool Piping Support etc. Design that such IPS considers interference item consisted to do not bear in existing facilities by one. IVA that is connected to the OPS are controlled and regulated by means of system pressure, system temperature and the water quality. IPS Vessel assembly is consisted of outer pressure vessel, inner pressure vessel, IPS head, inner assembly and test fuel carrier. After 3-Pin FTL development which is expected to be finished by the 2006, FTL will be used for the irradiation test of the new PWR-type fuel and can maximize the usage of HANARO.

  19. In-pile Creep Tests of Zircaloy Tubing in the Studsvik R2 Reactor. Final Report

    International Nuclear Information System (INIS)

    Tomani, Hans; Lindeloew, Ulf

    2000-12-01

    In this report are presented the findings of a prototype creep test on Zr4 guide tube specimens exposed in-pile and out-of-pile and stressed by constant bending moments. The calculated initial deflection curvature caused by the applied bending moment agrees very well with the measured initial values. Furthermore, the measurement results show excellent consistency. The dominant impact of neutron irradiation is clearly demonstrated. After 3 cycles (∼1300 hours) the irradiation creep is 4 times as large as the thermal creep. This is the case at least when fresh tube material is used. Irradiation creep progresses steadily, but the creep rate is not quite constant during the 3 irradiation cycles. The thermal creep, on the other hand, quickly saturates and there is hardly any further deflection after the second cycle for the specimen situated above the core. A limitation with the rig has been that the tube deflection became limited by the rig carrier body of the rig in the neutron flux (core) that disqualified the results of a fourth irradiation cycle actually performed in the fall of 1998. The test method appears to be suitable for testing the bending creep of different guide tube materials or designs under PWR conditions

  20. In-Pile thermal fatigue of First Wall mock-ups under ITER relevant conditions

    International Nuclear Information System (INIS)

    Blom, F.; Schmalz, F.; Kamer, S.; Ketema, D.J.

    2006-01-01

    The objective of this study is to perform in-pile thermal fatigue testing of three actively cooled First Wall (FW) mock-ups to check the effect of neutron irradiation on the Be/CuCrZr joints under representative FW operation conditions. Three FW mock-ups with Beryllium armor tiles will be neutron irradiated at 1 dpa (in Be) with parallel thermal fatigue testing for 30,000 cycles. The temperatures, stress distributions and stress amplitudes at the Be/CuCrZr interface of the mock-ups will be as close as possible to the values calculated for ITER FW panels. For this objective the PWM mocks-up subjected to thermal fatigue will be integrated with high density (W) plates on the Be-side to provide heat flux by nuclear heating. The assembly will be placed in the pool-side facility of the HFR and thermal cycling is then arranged by mechanical movement towards and from the core box. As the thermal design of the irradiation rig is very critical a pilot-irradiation will be performed to cross check the models used in the thermal design of the rig. The project is currently in the design phase of both the pilot and actual irradiation rig. The irradiation of the actual rig is planned to start at mid 2007 and last for two years. (author)

  1. Pneumatic capsule with a measuring system for in-pile irradiation

    International Nuclear Information System (INIS)

    Oshima, Keiichi; Yamazaki, Yasaburo; Hirata, Mitsuho; Ishii, Toshio; Shimozawa, Ryohei.

    1967-01-01

    A prior-art in-pile irradiation apparatus wherein a rabbit containing an irradiation specimen therein is inserted into and removed from a pile by a pneumatic system does not include means for measuring the temperature and pressure of the specimen under irradiation. When the rabbit is deformed during irradiation, it cannot be reliably recovered. A pneumatic capsule assembly with a measuring system according to this invention has a double structure which consists of an inner capsule containing the specimen therein and an outer capsule evacuated or filled with a gas. A thermocouple lace wire and a strain gauge are welded on the outside surface of the inner capsule as detection terminals for measuring the temperature and pressure. A rupture plate which bursts when the pressure in the inner capsule reaches a predetermined value is provided at a part of the inner capsule, and a fin for heat transmission is provided between the inner and outer capsules to thus prevent the deformation of the pneumatic capsule assembly as a whole. (Takasuka, S.)

  2. A review of radionuclide release and transport in recent in-pile experiments

    International Nuclear Information System (INIS)

    Harman, N.F.; Clough, P.N.

    1992-01-01

    The experimental series, reviewed in this work, are LOFT-LP-FP-2, PBF SFD ST to 1-4, Treat/STEP I to 4, and ACRR ST-1 and ST-2. These have the common features of in-core heating of a test fuel bundle to high temperatures (usually with some fuel melting) in an experimental reactor core, and of collecting and analysing the released fission products. They were designed to provide detailed information on the release from fuel of fission products and other radionuclides under LWR severe accident conditions, and on the chemical and physical forms and transport of the fission products. The main aim of this review is to bring together, in a systematic way, information on the conduct of the tests, on their successes and failures, and particularly on the information they generated on the chemical and physical behaviour of released fission products. By examining and analysing the data from all of the tests together, patterns of fission product behaviour may become apparent and insights may be gained, which would not be arrived at from individual test results. Moreover, important lessons may be learned, and useful guidance obtained, relating to the aims and conduct of future experimental programmes of fission product release from fuel and transport behaviour. The conclusions should be particularly relevant to the imminent Phebus-FP in-pile test series at Cadarache

  3. In-pile experiments and test facilities proposed for fast reactor safety

    International Nuclear Information System (INIS)

    Grolmes, M.A.; Avery, R.; Goldman, A.J.; Fauske, H.K.; Marchaterre, J.F.; Rose, D.; Wright, A.E.

    1976-01-01

    The role of in-pile experiments in support of the resolution of fast breeder reactor safety and licensing issues has been re-examined, with emphasis on key safety issues. Experiment needs have been related to the specific characteristics of these safety issues and to realistic requirements for additional test facility capabilities which can be achieved and utilized within the next ten years. It is found that those safety issues related to the energetics of core disruptive accidents have the largest impact on new facility requirements. However, utilization of existing facilities with modifications can provide for a continuing increase in experiment capability and experiment results on a timely bases. Emphasis has been placed upon maximum utilization of existing facilities and minimum requirements for new facilities. This evaluation has concluded that a new Safety Test Facility, STF, along with major modifications to the EBR II facility, improvement in TREAT capabilities, the existing Sodium Loop Safety Facility and corresponding Support Facilities provide the essential elements of the Safety Research Experiment Facilities (SAREF) required for resolution of key issues

  4. Sources

    International Nuclear Information System (INIS)

    Duffy, L.P.

    1991-01-01

    This paper discusses the sources of radiation in the narrow perspective of radioactivity and the even narrow perspective of those sources that concern environmental management and restoration activities at DOE facilities, as well as a few related sources. Sources of irritation, Sources of inflammatory jingoism, and Sources of information. First, the sources of irritation fall into three categories: No reliable scientific ombudsman to speak without bias and prejudice for the public good, Technical jargon with unclear definitions exists within the radioactive nomenclature, and Scientific community keeps a low-profile with regard to public information. The next area of personal concern are the sources of inflammation. This include such things as: Plutonium being described as the most dangerous substance known to man, The amount of plutonium required to make a bomb, Talk of transuranic waste containing plutonium and its health affects, TMI-2 and Chernobyl being described as Siamese twins, Inadequate information on low-level disposal sites and current regulatory requirements under 10 CFR 61, Enhanced engineered waste disposal not being presented to the public accurately. Numerous sources of disinformation regarding low level radiation high-level radiation, Elusive nature of the scientific community, The Federal and State Health Agencies resources to address comparative risk, and Regulatory agencies speaking out without the support of the scientific community

  5. Evaluation on sweep gas pressure drop in fusion blanket mock-up for in-pile test

    Energy Technology Data Exchange (ETDEWEB)

    Ishitsuka, Etsuo; Kawamura, Hiroshi; Sagawa, Hisashi (Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment); Nagakura, Masaaki; Kanzawa, Toru.

    1993-03-01

    In the ITER/CDA (Conceptual Design Activity) of a tritium breeding blanket, Japan have proposed the pebble-typed blanket. The in-pile mock-up test will be preparing in JMTR (Japan Materials Testing Reactor) for Japanese engineering design with the pebble-typed blanket. Therefore, the He sweep gas pressure drop in the pebble bed was measured for the design of the mock-up used on in-pile test. From the results of this test, it was clear that the pressure drop was predicted on Kozeny- Carman's equation within +25 [approx] -60 %, and that the pressure drop was not affected by moisture concentration (< 100 ppm). (author).

  6. Evaluation on sweep gas pressure drop in fusion blanket mock-up for in-pile test

    Energy Technology Data Exchange (ETDEWEB)

    Ishitsuka, Etsuo; Kawamura, Hiroshi; Sagawa, Hisashi [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Nagakura, Masaaki; Kanzawa, Toru

    1993-03-01

    In the ITER/CDA (Conceptual Design Activity) of a tritium breeding blanket, Japan have proposed the pebble-typed blanket. The in-pile mock-up test will be preparing in JMTR (Japan Materials Testing Reactor) for Japanese engineering design with the pebble-typed blanket. Therefore, the He sweep gas pressure drop in the pebble bed was measured for the design of the mock-up used on in-pile test. From the results of this test, it was clear that the pressure drop was predicted on Kozeny- Carman`s equation within +25 {approx} -60 %, and that the pressure drop was not affected by moisture concentration (< 100 ppm). (author).

  7. ECP measurements under neutron and gamma ray in in-pile loop and their data evaluation by water radiolysis calculations

    Energy Technology Data Exchange (ETDEWEB)

    Hanawa, S.; Nakamura, T.; Uchida, S. [Japan Atomic Energy Agency, Tokai-mura, Ibaraki (Japan); Kus, P.; Vsolak, R.; Kysela, J. [Nuclear Research Inst. Rez plc, Husinec - Rez (Czech Republic)

    2010-07-01

    In order to establish reliable electrochemical corrosion potential (ECP) sensors for applying in reactor core peripherals of power plants, performance tests of sensors under irradiation were carried out in the in-pile loop of the experimental reactor, LVR-15, at the Nuclear Research Institute (NRI) in Czech Republic. Responses of different kinds of sensors under neutron and gamma irradiation conditions have been compared each other. Corrosive conditions along the in-pile loop were calculated by water radiolysis calculation code, WRAC-J and calculated corrosive conditions were compared with the measured results. As a result of the evaluation, it was confirmed that the ECP sensors could be applied to irradiation conditions of reactor peripherals, while the water radiolysis model could be also applied for evaluation of corrosive conditions of reactor peripherals. (author)

  8. New Sensors for In-Pile Temperature Detection at the Advanced Test Reactor National Scientific User Facility

    International Nuclear Information System (INIS)

    Rempe, J.L.; Knudson, D.L.; Daw, J.E.; Condie, K.G.; Wilkins, S. Curtis

    2009-01-01

    The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. As a user facility, the ATR is supporting new users from universities, laboratories, and industry, as they conduct basic and applied nuclear research and development to advance the nation's energy security needs. A key component of the ATR NSUF effort is to develop and evaluate new in-pile instrumentation techniques that are capable of providing measurements of key parameters during irradiation. This paper describes the strategy for determining what instrumentation is needed and the program for developing new or enhanced sensors that can address these needs. Accomplishments from this program are illustrated by describing new sensors now available and under development for in-pile detection of temperature at various irradiation locations in the ATR.

  9. Multi-Period Trading via Convex Optimization

    DEFF Research Database (Denmark)

    Boyd, Stephen; Busseti, Enzo; Diamond, Steve

    2017-01-01

    We consider a basic model of multi-period trading, which can be used to evaluate the performance of a trading strategy. We describe a framework for single-period optimization, where the trades in each period are found by solving a convex optimization problem that trades off expected return, risk......, transaction cost and holding cost such as the borrowing cost for shorting assets. We then describe a multi-period version of the trading method, where optimization is used to plan a sequence of trades, with only the first one executed, using estimates of future quantities that are unknown when the trades....... In this paper, we do not address a critical component in a trading algorithm, the predictions or forecasts of future quantities. The methods we describe in this paper can be thought of as good ways to exploit predictions, no matter how they are made. We have also developed a companion open-source software...

  10. Trade in electricity certificates: a new means for stimulating electricity from renewable energy sources: final report from the electricity certificate inquiry

    International Nuclear Information System (INIS)

    2001-01-01

    We recommend the introduction of a quota-based Swedish certificate system to promote production of electricity from renewable energy sources commencing on 1 January 2003. We recommend that the certificate system should be based on the following principles: The quota obligation should be set for the years 2003 to 2010 and for all intervening years. The quota is expressed as a share of the total amount of electricity used. It is proposed that as a guideline, a target of an increase in electricity production from renewable energy sources of 10 TWh, in a period from 2003 to 2010 inclusive, is adopted. It is estimated that approximately half of this increase can come from expansion of existing production and half from new plants. The following electricity production plants are to be entitled to certificates provided they comply with the requirement that electricity is to be produced from renewable energy sources and that they meet the environmental criteria set, including fuel requirements, where electricity is produced with the aid of: 1. wind power, 2. solar energy, 3. geothermal energy, 4. certain types of biofuel, 5. wave energy, 6. hydroelectric power at existing plants which, at the time of the Electricity Certificate law coming into effect, have a capacity not exceeding 1 500 kilowatt, 7. hydroelectric power at plants which have not been in operation after 1 July 2001 but which were commissioned after the coming into effect of the Electricity Certificate law, 8. increased installed capacity at existing hydroelectric power plants to the extent that capacity is increased by measures undertaken after 1 July 2002, and 9. hydroelectric power produced at plants, which started operation for the first time after 1 July 2002. The quota period is defined as one calendar year. Certificates may be 'banked' by those subject to quota should they have more certificates at the end of the quota period than need to be submitted. A certificate is valid for an unlimited period of

  11. In-pile critical heat flux and post-dryout heat transfer measurements – A historical perspective

    Energy Technology Data Exchange (ETDEWEB)

    Groeneveld, D.C., E-mail: degroeneveld@gmail.com

    2017-06-15

    In the 1960s’ and 1970s’ Canada was a world leader in performing in-reactor heat transfer experiments on fuel bundles instrumented with miniature sheath thermocouples. Several Critical Heat Flux (CHF) and Post-CHF experiments were performed in Chalk River’s NRU and NRX reactors on water-cooled 3-, 18-, 19-, 21-, and 36-element fuel bundles. Most experiments were obtained at steady-state conditions, where the power was raised gradually from single-phase conditions up to the CHF and beyond. Occasionally, post-dryout temperatures up to 600 °C were maintained for several hours. In some tests, the fuel behaviour during loss-of-flow and blowdown transients was investigated – during these transients sheath temperatures could exceed 2000 °C. Because of the increasingly more stringent licensing requirements for in-pile heat transfer tests on instrumented fuel bundles, no in-pile CHF and post-dryout tests on fuel bundles have been performed anywhere in the world for the past 40 years. This paper provides details of these unique in-pile experiments and describes some of their heat transfer results.

  12. Trading stages

    DEFF Research Database (Denmark)

    Steiner, Uli; Tuljapurkar, Shripad; Coulson, Tim

    2012-01-01

    Interest in stage-and age structured models has recently increased because they can describe quantitative traits such as size that are left out of age-only demography. Available methods for the analysis of effects of vital rates on lifespan in stage-structured models have not been widely applied ...... examples. Much of our approach relies on trading of time and mortality risk in one stage for time and risk in others. Our approach contributes to the new framework of the study of age- and stage-structured biodemography....

  13. sources

    Directory of Open Access Journals (Sweden)

    Shu-Yin Chiang

    2002-01-01

    Full Text Available In this paper, we study the simplified models of the ATM (Asynchronous Transfer Mode multiplexer network with Bernoulli random traffic sources. Based on the model, the performance measures are analyzed by the different output service schemes.

  14. Anonymous electronic trading versus floor trading

    OpenAIRE

    Franke, Günter; Hess, Dieter

    1995-01-01

    This paper compares the attractiveness of floor trading and anonymous electronic trading systems. It is argued that in times of low information intensity the insight into the order book of the electronic trading system provides more valuable information than floor trading, but in times of high information intensity the reverse is true. Thus, the electronic system's market share in trading activity should decline in times of high information intensity. This hypothesis is tested by data on BUND...

  15. Trading volume and the number of trades

    OpenAIRE

    Marwan Izzeldin

    2007-01-01

    Trading volume and the number of trades are both used as proxies for market activity, with disagreement as to which is the better proxy for market activity. This paper investigates this issue using high frequency data for Cisco and Intel in 1997. A number of econometric methods are used, including GARCH augmented with lagged trading volume and number of trades, tests based on moment restrictions, regression analysis of volatility on volume and trades, normality of returns when standardized by...

  16. Fabrication, characteristics, and in-pile performance of UO2 pellets prepared from dry route powder

    International Nuclear Information System (INIS)

    Chotard, A.; Ledac, A.; Bernardin, M.

    1991-01-01

    The dry route conversion process of UF 6 to sinterable UO 2 powder has been used in France on a large scale for more than 10 years for the fabrication of PWR fuels. Thus, our fabrication and irradiation experience relates to more than 10,000 tons of fuel. As everyone knows, the dry route conversion process only involves gas-gas and gas-solid reactions which present the advantage of producing very little contaminated wastes and no liquid effluents. Powders obtained by this process are characterized by: - a very high purity, - a low specific surface area (around 2 m 2 /g), therefore a high resistance to spontaneous oxidation, - a good compressibility, - a very high sinterability (.98% T.D.), - a very high reproducibility. This powder also shows a high fineness which leads to very homogeneous blends with additives like pore former, U 3 O 8 or Gd 2 O 3 . On the other hand this fineness requires a granulation step which is actually not a disadvantage since it allows to adjust the granulate size to optimize the filling of press dies and so as to guarantee a good stability of the pellet dimensions and density. This pelletizing process leads to pellets characterized by: - a good thermal stability (0.5% T.D. after 34 hours at 1700degC), - no open porosity, - low H 2 content (0,3 ppm), - an homogeneous microstructure (grain size and porosity). Such characteristics mean that the UO 2 pellets from dry route conversion present an excellent in pile behaviour for high burnup up to 58,000 MWd/MtU in commercial plant, with: - low fission gas release, - good dimensional stability (densification, swelling), of which examples and results of PIE are described in the paper. The qualities of the dry route conversion powder and its flexibility of use make it possible to consider adjustment of the pellet characteristics, mainly: density, grain size and pore size distribution for specific uses or performance upgrade. (orig.)

  17. Viability of Pushrod Dilatometry Techniques for High Temperature In-Pile Measurements

    Energy Technology Data Exchange (ETDEWEB)

    J. E. Daw; J. L. Rempe; D. L. Knudson; K. G. Condie; J. C. Crepeau

    2008-03-01

    To evaluate the performance of new fuel, cladding, and structural materials for use in advanced and existing nuclear reactors, robust instrumentation is needed. Changes in material deformation are typically evaluated out-of-pile, where properties of materials are measured after samples were irradiated for a specified length of time. To address this problem, a series of tests were performed to examine the viability of using pushrod dilatometer techniques for in-pile instrumentation to measure deformation. The tests were performed in three phases. First, familiarity was gained in the use and accuracy of this system by testing samples with well defined thermal elongation characteristics. Second, high temperature data for steels, specifically SA533 Grade B, Class 1 (SA533B1) Low Alloy Steel and Stainless Steel 304 (SS304), found in Light Water Reactor (LWR) vessels, were aquired. Finally, data were obtained from a short pushrod in a horizontal geometry to data obtained from a longer pushrod in a vertical geometry, the configuration likely to be used for in-situ measurements. Results of testing show that previously accepted data for the structural steels tested, SA533B1 and SS304, are inaccurate at high temperatures (above 500 oC) due to extrpolation of high temperature data. This is especially true for SA533B1, as previous data do not account for the phase transformation of the material between 730 oC and 830 oC. Also, comparison of results for horizontal and vertical configurations show a maximum percent difference of 2.02% for high temperature data.

  18. In-Pile Qualification of the Fast-Neutron-Detection-System

    Science.gov (United States)

    Fourmentel, D.; Villard, J.-F.; Destouches, C.; Geslot, B.; Vermeeren, L.; Schyns, M.

    2018-01-01

    In order to improve measurement techniques for neutron flux assessment, a unique system for online measurement of fast neutron flux has been developed and recently qualified in-pile by the French Alternative Energies and Atomic Energy Commission (CEA) in cooperation with the Belgian Nuclear Research Centre (SCK•ECEN). The Fast-Neutron-Detection-System (FNDS) has been designed to monitor accurately high-energy neutrons flux (E > 1 MeV) in typical Material Testing Reactor conditions, where overall neutron flux level can be as high as 1015 n.cm-2.s-1 and is generally dominated by thermal neutrons. Moreover, the neutron flux is coupled with a high gamma flux of typically a few 1015 γ.cm-2.s-1, which can be highly disturbing for the online measurement of neutron fluxes. The patented FNDS system is based on two detectors, including a miniature fission chamber with a special fissile material presenting an energy threshold near 1 MeV, which can be 242Pu for MTR conditions. Fission chambers are operated in Campbelling mode for an efficient gamma rejection. FNDS also includes a specific software that processes measurements to compensate online the fissile material depletion and to adjust the sensitivity of the detectors, in order to produce a precise evaluation of both thermal and fast neutron flux even after long term irradiation. FNDS has been validated through a two-step experimental program. A first set of tests was performed at BR2 reactor operated by SCK•CEN in Belgium. Then a second test was recently completed at ISIS reactor operated by CEA in France. FNDS proved its ability to measure online the fast neutron flux with an overall accuracy better than 5%.

  19. Post-Irradiation Examination and In-Pile Measurement Techniques for Water Reactor Fuels

    International Nuclear Information System (INIS)

    2009-12-01

    in the 1960s when the construction of NPPs was being started. Evidently it can be assumed that infrastructure with basic unique equipments is old enough, both morally and physically, and needs to be up-graded or replaced. Thus, a sharp increase of the hydrocarbon fuel cost, green-house effect, necessity to construct more safe and efficient NPPs, justification of the lifetime prolongation of the existing NPPs, moral and physical ageing of the hot labs and research reactors equipment lead to the strong necessity to develop more perfect and more precise methods and equipment to examine irradiated components of nuclear reactors, first of all the most expensive one - nuclear fuel. Now the national hot laboratories and material testing reactors usually act as individual independent research establishments without any common and coordinated technical and business strategy towards the future needs and challenges. Even if there are not many joint programs for the development of nuclear power engineering in different countries, the method base and accumulated experience of the in- and post-reactor experiments should be widely shared so as to decrease the cost of this base in each country and to enforce its development. Thus, both problems and results of the application of new techniques to examine nuclear reactor components, as well as the conditions of separate labs should be discussed at the international level. The IAEA technical meetings are one of the most convenient means of arranging such discussion on the problems of the hot labs and research reactors development and application of new original techniques for examination of reactor materials properties. This publication represents a summary and proceedings of the two technical meetings (TMs) organized by IAEA on the subjects of Hot Cell Post-Irradiation Examination (PIE) Techniques and Pool Side Inspection of Water Reactor Fuel Assemblies and Fuel Rod Instrumentation and In-Pile Measurement Techniques. The first TM was

  20. Fuel trading

    International Nuclear Information System (INIS)

    2015-01-01

    A first part of this report proposes an overview of trends and predictions. After a synthesis on the sector changes and trends, it indicates and comments the most recent predictions for the consumption of refined oil products and for the turnover of the fuel wholesale market, reports the main highlights concerning the sector's life, and gives a dashboard of the sector activity. The second part proposes the annual report on trends and competition. It presents the main operator profiles and fuel categories, the main determining factors of the activity, the evolution of the sector context between 2005 and 2015 (consumptions, prices, temperature evolution). It analyses the evolution of the sector activity and indicators (sales, turnovers, prices, imports). Financial performances of enterprises are presented. The economic structure of the sector is described (evolution of the economic fabric, structural characteristics, French foreign trade). Actors are then presented and ranked in terms of turnover, of added value, and of result

  1. Aspects related to 'emission trading'

    International Nuclear Information System (INIS)

    Tutuianu, Ovidiu

    1999-01-01

    The paper presents the aspects of international GHG (greenhouse gases) emission trading, such as: quality of GHG emission data, possible partners, monitoring activity, market mechanisms and difficulties. The following conclusions are drown: - debates on international trade with GHG emissions are currently in a very early stage; - actions are possible and feasible, particularly after Kyoto Conference, as versatile mechanism (besides the Joint Implementation Projects) which have in view the lowering of the global emission costs in different zones of the planet; - difficulties concerning monitoring, reporting and verification, practically preclude implementing a system of emission trading covering all the GHG, all the sources and reservoirs; - an international viable system of emission trading could initiate with a limited number of participants and consideration of only emission categories easy to be confined and surveyed; - existence of a national market and corresponding institutions for monitoring which could booster an international system development

  2. Seismic analysis for shroud facility in-pile tube and saturated temperature capsules

    International Nuclear Information System (INIS)

    Iimura, Koichi; Yamaura, Takayuki; Ogawa, Mitsuhiro

    2009-07-01

    At Oarai Research and Development Center, Japan Atomic Energy Agency (JAEA), the plan of repairing and refurbishing Japan Materials Testing Reactor (JMTR) has progressed in order to restart JMTR operation in the fiscal 2011. As a part of effective use of JMTR, the neutron irradiation tests of LWR fuels and materials has been planned in order to study their soundness. By using Oarai Shroud Facility (OSF-1) and Fuel Irradiation Facility with the He-3 gas control system for power lamping test using Boiling Water Capsules (BOCA Irradiation Facility), the irradiation tests with power ramping will be carried out to study the soundness of fuel under LWR Transient condition. OSF-1 is the irradiation facility of shroud type that can insert and eject the capsule under reactor operation, and is composed of 'In-pile Tube', 'Cooling system' and 'Capsule exchange system'. BOCA Irradiation Facility is the facility which simulates irradiation environment of LWR, and is composed of 'Boiling water Capsule', 'Capsule control system' and 'Power control system by He-3'. By using Saturated temperature Capsules and the water environment control system, the material irradiation tests under the water chemistry condition of LWR will be carried out to clarify the mechanism of IASCC. In JMTR, these facilities are in service at the present. However, the detailed design for renewal or remodeling was carried out based on the new design condition in order to be correspondent to the irradiation test plan after restart JMTR operation. In this seismic analysis of the detailed design, each equipment classification and operating state were arranged with 'Japanese technical standards of the structure on nuclear facility for test research' and 'Technical guidelines for seismic design of nuclear power plants on current, and then, stress calculation and evaluation were carried out by FEM piping analysis code 'SAP' and structure analysis code 'ABAQUS'. About the stress of the seismic force, it was proven

  3. In-pile behavior of controlled beta-quenched fuel channels

    Energy Technology Data Exchange (ETDEWEB)

    Moeckel, Andreas; Pflaum, Wolfgang; Cremer, Ingo [AREVA NP GmbH, Erlangen (Germany); Zbib, Ali A. [AREVA NP Inc., Richland, WA (United States)

    2011-07-01

    of a German boiling water reactor (BWR) nuclear power plant in 2004. Since then, additional beta-quenched lead fuel channels have been placed in the core of some other European BWRs to broaden the in-pile experience with such channels in different nuclear power plants. (orig.)

  4. New In-pile Instrumentation to Support Fuel Cycle Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    J. Rempe; H. MacLean; R. Schley; D. Hurley; J. Daw; S. Taylor; J. Smith; J. Svoboda; D. Kotter; D. Knudson; M. Guers; S. C. Wilkins

    2011-01-01

    New and enhanced nuclear fuels are a key enabler for new and improved reactor technologies. For example, the goals of the next generation nuclear plant (NGNP) will not be met without irradiations successfully demonstrating the safety and reliability of new fuels. Likewise, fuel reliability has become paramount in ensuring the competitiveness of nuclear power plants. Recently, the Office of Nuclear Energy in the Department of Energy (DOE-NE) launched a new direction in fuel research and development that emphasizes an approach relying on first principle models to develop optimized fuel designs that offer significant improvements over current fuels. To facilitate this approach, high fidelity, real-time, data are essential for characterizing the performance of new fuels during irradiation testing. A three-year strategic research program is proposed for developing the required test vehicles with sensors of unprecedented accuracy and resolution for obtaining the data needed to characterize three-dimensional changes in fuel microstructure during irradiation testing. When implemented, this strategy will yield test capsule designs that are instrumented with new sensor technologies for the Advanced Test Reactor (ATR) and other irradiation locations for the Fuel Cycle Research and Development (FC R&D) program. Prior laboratory testing, and as needed, irradiation testing, of these sensors will have been completed to give sufficient confidence that the irradiation tests will yield the required data. Obtaining these sensors must draw upon the expertise of a wide-range of organizations not currently supporting nuclear fuels research. This document defines this strategic program and provides the necessary background information related to fuel irradiation testing, desired parameters for detection, and an overview of currently available in-pile instrumentation. In addition, candidate sensor technologies are identified in this document, and a list of proposed criteria for ranking

  5. In-pile experiments on fuel rod behavior during a LOCA

    International Nuclear Information System (INIS)

    Karb, E.; Pruessmann, M.; Sepold, L.

    1980-05-01

    This report describes the results of the Test Series F, Tests F 1 through F 5, in the in-pile experimental program with single rods in the DK loop of the FR2 reactor at the Kernforschungszentrum Karlsruhe (KfK). The research is part of the Nuclear Safety Project's (PNS) fuel behavior program. The main objective of the FR2-LOCA tests is to provide information about the effects of a nuclear environment on the mechanisms of fuel rod failure in the second heatup phase of a LOCA. The test rods have a heated length of 50 cm, and their radial dimensions are identical with those of a commercial German PWR. The main parameter of the FR2-LOCA test program is the burnup. The F tests were perfomed from Oct. 25, 1977 to Nov. 22, 1977. They were the first tests in this program to use pre-irradiated fuel rods. The nominal burnup of the test rods was 20 000 MWd/t. During the transient test, the test rods were subjected to rod powers between 36 and 41 W/cm and were pressurized with He to hot internal pressures between 46 and 83 bar. The test rods during the heatup phase at pressures of 56, 53, 42, 72 and 60 bar, respectively. The burst temperatures were determined to be 890, 893, 932, 835 and 880 0 C for test F 1 through F 5. The maximum total circumferential elongations amount to 59, 38, 27, 34 and 41%, respectively. The F tests revealed a fragmentation of the fuel after the irradiation (prior to the tests) and a disintegration of the fuel pellet column after the transient tests due to cladding ballooning. The post-test results indicated a significant reduction of the pellet stack length for all five test rods. The burst data of the F tests did not reveal any difference between tests with unirradiated fuel rods and the irradiated fuel rods of this test series. (orig./HP) [de

  6. Evaluation of the in-pile pressure data from instrumented fuel assemblies IFA-431 and IFA-432

    International Nuclear Information System (INIS)

    Bradley, E.R.; Cunningham, M.E.; Lanning, D.D.; Williford, R.E.

    1979-10-01

    This report includes results of the examination of the in-pile pressure data from instrumented test assemblies IFA-431 and 432. The pressure data have been used to estimate the fission gas release fraction as a function of fuel burnup. Included are comparisons of the estimated release functions and those predicted by three fission gas release models using the experimental temperature histories of the fuel rods. These comparisons show that fuel temperature is the primary factor in determining fission gas release and that burnup-enhanced fission gas release is not important in UO 2 fuels irradiated to 1700 GJ/kgU

  7. Innovations for In-Pile Measurements in the Framework of the CEA-SCK•CEN Joint Instrumentation Laboratory

    Science.gov (United States)

    Villard, Jean-Francois; Schyns, Marc

    2010-12-01

    Optimizing the life cycle of nuclear systems under safety constraints requires high-performance experimental programs to reduce uncertainties on margins and limits. In addition to improvement in modeling and simulation, innovation in instrumentation is crucial for analytical and integral experiments conducted in research reactors. The quality of nuclear research programs relies obviously on an excellent knowledge of their experimental environment which constantly calls for better online determination of neutron and gamma flux. But the combination of continuously increasing scientific requirements and new experimental domains -brought for example by Generation IV programsnecessitates also major innovations for in-pile measurements of temperature, dimensions, pressure or chemical analysis in innovative mediums. At the same time, the recent arising of a European platform around the building of the Jules Horowitz Reactor offers new opportunities for research institutes and organizations to pool their resources in order to face these technical challenges. In this situation, CEA (French Nuclear Energy Commission) and SCK'CEN (Belgian Nuclear Research Centre) have combined their efforts and now share common developments through a Joint Instrumentation Laboratory. Significant progresses have thus been obtained recently in the field of in-pile measurements, on one hand by improvement of existing measurement methods, and on the other hand by introduction in research reactors of original measurement techniques. This paper highlights the state-of-the-art and the main requirements regarding in-pile measurements, particularly for the needs of current and future irradiation programs performed in material testing reactors. Some of the main on-going developments performed in the framework of the Joint Instrumentation Laboratory are also described, such as: - a unique fast neutron flux measurement system using fission chambers with 242Pu deposit and a specific online data processing

  8. In-pile and out-of-pile testing of a molybdenum-uranium dioxide cermet fueled themionic diode

    Science.gov (United States)

    Diianni, D. C.

    1972-01-01

    The behavior of Mo-UO2 cermet fuel in a diode for thermionic reactor application was studied. The diode had a Mo-0.5 Ti emitter and niobium collector. Output power ranged from 1.4 to 2.8 W/cm squared at emitter and collector temperatures of 1500 deg and 540 C. Thermionic performance was stable within the limits of the instrumentation sensitivity. Through 1000 hours of in-pile operation the emitter was dimensionally stable. However, some fission gases (15 percent) leaked through an inner clad imperfection that occurred during fuel fabrication.

  9. In-pile post-DNB behavior of a nine-rod PWR-type fuel bundle

    International Nuclear Information System (INIS)

    Gunnerson, F.S.; MacDonald, P.E.

    1980-01-01

    The results of an in-pile power-cooling-mismatch (PCM) test designed to investigate the behavior of a nine-rod, PWR-type fuel bundle under intermittent and sustained periods of high temperature film boiling operation are presented. Primary emphasis is placed on the DNB and post-DNB events including rod-to-rod interactions, return to nucleate boiling (RNB), and fuel rod failure. A comparison of the DNB behavior of the individual bundle rods with single-rod data obtained from previous PCM tests is also made

  10. In-pile observations of fuel and clad relocation during LMFBR initiation phase accident experiments - the STAR experiments

    International Nuclear Information System (INIS)

    Wright, S.A.; Schumacher, G.; Henkel, P.R.; Royl, P.

    1987-01-01

    A series of seven in-pile experiments (the STAR experiments) were performed in which clad motion and fuel dispersal were observed in small pin bundles with high-speed cinematography. The experimental heating conditions reproduced a range of Loss of Flow (LOF) accident scenarios for the lead subassemblies in LMFBRs. The experiments show strong tendencies for limited clad motion in multiple pin bundles, early fuel disruption and dispersal (prior to fuel melting) in moderate power transients having simultaneous clad melting and fuel disruption. The more recent experiments indicate a possibility of steel vapor driven fuel dispersal after fuel breakup and intimate fuel/steel mixing. (author)

  11. Study of a device for the direct measurement of the fission gas pressure inside an in-pile fuel element

    International Nuclear Information System (INIS)

    Lavaud, B.; Uschanoff, S.

    1964-01-01

    The fission gas pressure inside a fuel element made of a refractory fuel constitutes an important limiting factor for the burn-up. Although it is possible to calculate approximately the volume of gas produced outside the fuel during its life-time; it is nevertheless very difficult to evaluate the pressure since the volume allowed to the fission gases, as well as their temperature are known only very approximately. This physical value, which is essential for the technologist, can only be known by direct in-pile measurement of the pressure. The report describes the equipment which has been developed for this test. (authors) [fr

  12. Impact of CO2 trade on electricity producers depending on the use of different energy sources in Estonia. CO2 kaubanduse mõju elektritootjatele erinevate energiaallikate kasutamisel Eesti tingimustes

    Directory of Open Access Journals (Sweden)

    Jüri Kleesmaa

    2013-01-01

    Full Text Available The aim of this paper is to identify the main circumstances related to the Estonian energy sector and economy and the facts which are important for development of the research conducted by the author and for clarification of the main viewpoints. The paper provides the principal facts on the first (2005-2007 and second (2008-2012 period of CO2 (carbon dioxide trade in Estonia; describes electricity production in Estonia on the basis of the electricity development plan effective in the reference year 2007 and proceeding from that – calculations of CO2 emissions by kind of fuel used. The paper will touch upon the main legislative provisions concerning renewable energy support, which essentially influence the development of renewable energy generation and indirectly the CO2 trade. Analogously with the reference year 2007 methods of calculation, CO2 emissions have been calculated for 2020. The electricity production prognosis for the year 2020 is based on the interpretation of the electricity sector development plan. Computation according to the CO2 calculation methodology shows that the CO2 emission amount will be ca 5.7 Mt (million tonnes in 2020. In 2020 compared to 2007, the domestic consumption of electricity is estimated to grow: in 2007 the domestic consumption of electricity was ca 8200 GWh, in 2020 it is estimated to be ca 10480 GWh, i.e. the growth is ca 22%. Decrease in the emission amount of CO2 will be gained due to the expected use of different energy sources, compared to those used in 2007, in the designed power plants based on renewable energy sources or gas. The share of oil shale-based energy production will decrease from 83% to 44% resulting in a further reduction of CO2 emissions from 12 Mt to 4 Mt. In view of the fact that, during consumption, the CO2 emissions comprise nearly 60% of the gross consumption of electricity production, the research reveals that raising consumer awareness of the use of various energy saving

  13. The determinants of trade credit use

    NARCIS (Netherlands)

    Hermes, Niels; Kihanga, Ernest; Lensink, Robert; Lutz, Clemens

    2015-01-01

    Most small businesses in the developing economies suffer from a lack of access to formal external finance. One important alternative source of finance for these entrepreneurs is trade credit. Applying a unique data-set containing data on specific trade relations between rice wholesalers and rice

  14. Entropy of international trades

    Science.gov (United States)

    Oh, Chang-Young; Lee, D.-S.

    2017-05-01

    The organization of international trades is highly complex under the collective efforts towards economic profits of participating countries given inhomogeneous resources for production. Considering the trade flux as the probability of exporting a product from a country to another, we evaluate the entropy of the world trades in the period 1950-2000. The trade entropy has increased with time, and we show that it is mainly due to the extension of trade partnership. For a given number of trade partners, the mean trade entropy is about 60% of the maximum possible entropy, independent of time, which can be regarded as a characteristic of the trade fluxes' heterogeneity and is shown to be derived from the scaling and functional behaviors of the universal trade-flux distribution. The correlation and time evolution of the individual countries' gross-domestic products and the number of trade partners show that most countries achieved their economic growth partly by extending their trade relationship.

  15. Investigation of special capsule technologies for material in-pile irradiation test and development plan in HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Cho, M. S.; Son, J. M.; Kim, D. S.; Park, S. J.; Cho, Y. G.; Seo, C. K.; Kang, Y. H. [KAERI, Taejon (Korea, Republic of)

    2002-10-01

    In-pile test for several materials such as Zr alloy, stainless steel, Cr-Ni steel etc. which are used as structural material of the advanced reactor and KNGR(Korea Next Generation Reactor) like SMART, is necessary to produce the design data for developing new reactor materials. Advanced countries like USA, Europe and Japan etc. are not only performing the simple irradiation test for materials, but developing many kinds of special capsule to perform in-pile test having special purpose. For the special test items of fuel rod, fission products, total heat generation, swelling, deformation, sweep gas, temperature ramping and BOCA etc. are being actively concerned. There are capsules measuring creep, fatigue, crack growth, and controlling fluence etc. for special irradiation test of materials. In addition, the advanced countries are developing several instrument technologies suitable for the special capsules. In HANARO, non-instrumented, instrumented material capsules and non-instrumented fuel capsule have been developed and they have been utilized in the irradiation test for users, and creep capsule loading single specimen was made and is planned to test in the reactor soon. For some forthcoming years, special capsules not only measuring creep deformation with multi-specimens, fatigue, controlling fluence but crack propagation and gas sweep considering the requirements of users will be developed in HANARO.

  16. International red meat trade.

    Science.gov (United States)

    Brester, Gary W; Marsh, John M; Plain, Ronald L

    2003-07-01

    The maturation of the US beef and pork markets and increasing consumer demands for convenience, safety, and nutrition suggests that the beef and pork industries must focus on product development and promotion. New marketing arrangements are developing that help coordinate production with consumer demands. The relative high levels of incomes in the United States are likely to increase the demands for branded products rather than increase total per capita consumption. Foreign markets represent the greatest opportunity for increased demand for commodity beef and pork products. Increasing incomes in developing countries will likely allow consumers to increase consumption of animal-source proteins. Real prices of beef and pork have declined substantially because of sagging domestic demand and increasing farm-level production technologies. Increasing US beef and pork exports have obviated some of the price declines. Pork attained a net export position from a quantity perspective in 1995. The United States continues to be a net importer of beef on a quantity basis but is close to becoming a net exporter in terms of value. By-products continue to play a critical role in determining the red meat trade balance and producer prices. The United States, however, must continue to become cost, price, and quality competitive with other suppliers and must secure additional market access if it is to sustain recent trade trends. Several trade tensions remain in the red meat industry. For example, mandated COOL will undoubtedly have domestic and international effects on the beef and pork sectors. Domestically, uncertainty regarding consumer demand responses or quality perceptions regarding product origin, as well as added processor-retailer costs will be nontrivial. How these factors balance out in terms of benefits versus costs to the industry is uncertain. From an international perspective, some beef and pork export suppliers to the United States could view required labeling as a

  17. International Trade and Protectionism.

    Science.gov (United States)

    Stanford Univ., CA. Stanford Program on International and Cross Cultural Education.

    This unit is designed to investigate the reasons for international trade and the issue of trade protectionism by focusing on the case study of the U.S. trade relationship with Taiwan. The unit begins with a simulation that highlights the concepts of global interdependence, the need for international trade, and the distribution of the world's…

  18. Status of the EXOTIC-8 programme and first in-pile results for Li{sub 2}TiO{sub 3} pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Van der Laan, J G; Stijkel, M P [Netherlands Energy Research Foundation (ECN), Petten (Netherlands); Conrad, R

    1998-03-01

    After renewal of the Tritium Measuring Station the HFR is again fully operational for in-pile breeder irradiations. The EXOTIC-8 series has started with first three experiments on June 12, 1997. First in-pile results have been obtained for Li{sub 2}TiO{sub 3}-pebbles supplied by CEA: preliminary analyses indicate satisfactory in-pile behaviour with fast recovery from transient conditions. Five further experiments have been defined which implies that in the present planning EXOTIC-8 is filled completely up to Fall`98 and 2 of 4 positions are occupied up to Spring`99. P.I.E. results will be obtained from Spring`98 onwards. (J.P.N.)

  19. Pollution added credit trading (PACT). New dimensions in emissions trading

    International Nuclear Information System (INIS)

    Schaltegger, Stefan; Thomas, Tom

    1996-01-01

    To date, sources of hazardous, toxic, or otherwise harmful emissions have been regulated on a pollutant by pollutant basis. Environmental policies, even the more advanced 'incentive-based' programs, have focused on individual substances rather than on the overall environmental problem to which the substances contribute. This has produced results that are less economically efficient and ecologically effective than is desirable. A more comprehensive approach combines the principles of emission reduction credit trading with advances made recently in the field of environmental impact assessment, to yield an advanced form of inter-pollutant trading, which we refer to as pollution added credit trading (PACT). PACT incorporates a method for estimating the total environmental harm generated (pollution added) by a facility emitting a variety of pollutants. Weightings that reflect relative harm are used to calculate total pollution added. Each facility covered by PACT would receive annual allowances for total pollution added that they could discharge to the environment. As with existing emissions trading programs, surplus allowances could be sold and shortfalls would be covered by purchasing other facilities' surplus allowances. PACT is more efficient than single-pollutant emissions trading in that it captures differences in marginal reduction costs that exist between pollutants as well as between facilities. It is more ecologically effective because it focuses on the overall environmental problem, rather than on the individual pollutants that contribute to the problem

  20. The Outlier Sectors: Areas of Non-Free Trade in the North American Free Trade Agreement

    OpenAIRE

    Eric T. Miller

    2002-01-01

    Since its entry into force, the North American Free Trade Agreement (NAFTA) has been enormously influential as a model for trade liberalization. While trade in goods among Canada, the United States and Mexico has been liberalized to a significant degree, this most famous of agreements nonetheless contains areas of recalcitrant protectionism. The first part of this paper identifies these "outlier sectors" and classifies them by primary source advocating protectionism, i.e., producer interests ...

  1. Obsidian trade routes in the mayan area.

    Science.gov (United States)

    Hammond, N

    1972-12-08

    Obsidian from two sources in highland Guatemala has been found at 23 sites of the Classic Mayan civilization, mainly in the nonvolcanic lowlands to the north. The distribution, together with trade routes suggested by topography and documentary sources, suggests efficient waterborne transport and competition between sources for the lowland market.

  2. Regional Trade Agreement and Agricultural Trade in East African ...

    African Journals Online (AJOL)

    Intra-EAC trade is very low, that is, at 9 per cent of the total regional trade, but it is on upward trend. Agricultural trade accounts for over 40 per cent of the intra-EAC trade. This study investigated the effect of EAC regional trade agreement on the regions agricultural trade by analyzing the degree of trade creation and ...

  3. Open Source, Social Activism and "Necessary Trade-offs" in the Digital Enclosure: A Case Study of Platform Co-operative, Loomio.org

    Directory of Open Access Journals (Sweden)

    Sam K Jackson

    2016-10-01

    Full Text Available This article explores the tensions and tradeoffs facing the open source platform co-operative Loomio.org, an online tool that aims to decentralize power through deliberative decision-making. Combining discourse analysis with political economy, we demonstrate how Loomio’s politics of resistance is built directly into the architectural design and platform structure, which invites users to participate in its development and evolution. Yet by prioritizing its social justice mission, Loomio must make certain tradeoffs around data storage and management that paradoxically threatens to compromise its wider social goals. The realities of operating an open source platform are discussed in the context of the contemporary digital economy. We argue that if platform co-operatives like Loomio are to fully realize their goals, a digital commons unencumbered by capitalism requires access to reliable, affordable and accessible alternatives to the existing Internet infrastructure.

  4. Trade, development and sustainability

    DEFF Research Database (Denmark)

    Røpke, Inge

    1994-01-01

    Mainstream economic theory argues that trade, and especially free trade, is beneficial to everyone involved. This fundamental idea ? which has the character of a dogma ? still plays an important role in international discussions on trade issues, notably in relation to development and environment...... be defended in all cases. Especially, the developing countries' benefits from trade have been very dubious. Furthermore, the trading system has contributed to environmental problems in several ways, e.g. generating undervaluation of natural resources, stimulating economic growth with environmental....... The purpose of this article is to critically assess the "free trade dogma" and to investigate the validity of widely used arguments concerning the relations between trade and development and between trade and environment. It is argued that the trading system is not something inherently good, which should...

  5. Environmental pollution and world trade

    International Nuclear Information System (INIS)

    Batra, Ravi; Beladi, Hamid; Frasca, Ralph

    1998-01-01

    In this paper we present a model that highlights the relationship between international trade and environmental pollution. It includes a small open economy that produces a domestic composite good and imports another composite good and energy products. The pollution is created by local production, global production and transportation. Given this model we demonstrate that free trade within the current political and economic context may produce a suboptimal level of welfare. The rationale is based upon the argument that transportation is energy-intensive and that, therefore, trade itself is a source of pollution. Consequently, under certain global conditions the introduction of an energy tariff in a small open economy raises social welfare and is superior to free trade. A consumption tariff adopted by a single nation will not have similar consequences because it has no impact upon local usage. However, when a consumption tariff is globally adopted there is the opportunity for a net benefit. Finally, we argue that a global tariff that raises both the price of energy and the price of the imported composite good may generate the greatest increase in welfare by reducing both energy-intensive production and energy-intensive trade

  6. Environmental pollution and world trade

    Energy Technology Data Exchange (ETDEWEB)

    Batra, Ravi [Department of Economics, Southern Methodist University, Dallas, TX 75275-0496 (United States); Beladi, Hamid; Frasca, Ralph [Department of Economics and Finance, University of Dayton, Dayton, OH 45469-2240 (United States)

    1998-11-01

    In this paper we present a model that highlights the relationship between international trade and environmental pollution. It includes a small open economy that produces a domestic composite good and imports another composite good and energy products. The pollution is created by local production, global production and transportation. Given this model we demonstrate that free trade within the current political and economic context may produce a suboptimal level of welfare. The rationale is based upon the argument that transportation is energy-intensive and that, therefore, trade itself is a source of pollution. Consequently, under certain global conditions the introduction of an energy tariff in a small open economy raises social welfare and is superior to free trade. A consumption tariff adopted by a single nation will not have similar consequences because it has no impact upon local usage. However, when a consumption tariff is globally adopted there is the opportunity for a net benefit. Finally, we argue that a global tariff that raises both the price of energy and the price of the imported composite good may generate the greatest increase in welfare by reducing both energy-intensive production and energy-intensive trade

  7. Sustainable International Bioenergy Trade. Evaluating the impact of sustainability criteria and policy on past and future bioenergy supply and trade

    NARCIS (Netherlands)

    Lamers, Patrick

    2014-01-01

    Within a single decade, bioenergy has shifted from a largely local energy source with marginal trade volumes to a globally traded item. The primary objective of this thesis is to evaluate the links between national renewable energy support and trade policies and market forces on past global

  8. In-pile test of Li 2TiO 3 pebble bed with neutron pulse operation

    Science.gov (United States)

    Tsuchiya, K.; Nakamichi, M.; Kikukawa, A.; Nagao, Y.; Enoeda, M.; Osaki, T.; Ioki, K.; Kawamura, H.

    2002-12-01

    Lithium titanate (Li 2TiO 3) is one of the candidate materials as tritium breeder in the breeding blanket of fusion reactors, and it is necessary to show the tritium release behavior of Li 2TiO 3 pebble beds. Therefore, a blanket in-pile mockup was developed and in situ tritium release experiments with the Li 2TiO 3 pebble bed were carried out in the Japan Materials Testing Reactor. In this study, the relationship between tritium release behavior from Li 2TiO 3 pebble beds and effects of various parameters were evaluated. The ( R/ G) ratio of tritium release ( R) and tritium generation ( G) was saturated when the temperature at the outside edge of the Li 2TiO 3 pebble bed became 300 °C. The tritium release amount increased cycle by cycle and saturated after about 20 pulse operations.

  9. IR1 flow tube and In-Pile Test Section Pressure drop test for the 3-Pin Fuel Test Loop

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H. H.; Park, K. N.; Chi, D. Y.; Sim, B. S.; Park, S. K.; Lee, J. M.; Lee, C. Y.; Kim, H. N

    2006-02-15

    The in-pile Section (IPS) of 3-pin Fuel Test Loop(FTL) shall be installed in the vertical hole call IR1 of HANARO reactor core. In order to verify the pressure drop and flow rate both the inside region of IPS at the annular region between IPS and IR1 flow tube, a pressure drop was measured by varing the flow rate on both regions. The measured pressure drop in the annular region is 209kpa at 14.9kg/s which meets the limiting condition of operation of 200kpa. The measured pressure drop in side the IPS becomes 260.25kpa which is lower than the designed value of 306.65kpa. As the pressure drop is lower than the design value, it is quite conservative from the safety and operating point of view.

  10. Annealing tests of in-pile irradiated oxide coated U-Mo/Al-Si dispersed nuclear fuel

    Science.gov (United States)

    Zweifel, T.; Valot, Ch.; Pontillon, Y.; Lamontagne, J.; Vermersch, A.; Barrallier, L.; Blay, T.; Petry, W.; Palancher, H.

    2014-09-01

    U-Mo/Al based nuclear fuels have been worldwide considered as a promising high density fuel for the conversion of high flux research reactors from highly enriched uranium to lower enrichment. In this paper, we present the annealing test up to 1800 °C of in-pile irradiated U-Mo/Al-Si fuel plate samples. More than 70% of the fission gases (FGs) are released during two major FG release peaks around 500 °C and 670 °C. Additional characterisations of the samples by XRD, EPMA and SEM suggest that up to 500 °C FGs are released from IDL/matrix interfaces. The second peak at 670 °C representing the main release of FGs originates from the interaction between U-Mo and matrix in the vicinity of the cladding.

  11. Heat transfer in the in-pile test section and penetration region of 3-pin fuel test loop

    Energy Technology Data Exchange (ETDEWEB)

    Chi, Dae Young; Lee, Chung Young; Sim, Bong Shick; Park, Kook Nam; Park, Su Ki; Lee, Jong Min; Kim, Young Jin

    2003-12-01

    This report studies two types of normal heat transfer. One is the heat loss from the pressure vessel of In-Pile Test Section to HANARO pool water via IPS insulation gas gap. The other is the heat transfer of the Penetration Cooling Water System including the effect of the Foamglas insulator at the penetration region. The heat transfer from IPS insulation gas gap has been performed according to the detail design results from NUKEM. The heat loss also occurs at the concrete penetration region between the HANARO pool water and the FTL pipe gallery. The Foamglas insulator has been already installed at the MCW piping of the penetration region. This insulation effect has been reviewed. The Penetration Cooling Water System has been designed to fulfill the design requirement not to exceed the allowable temperature at the penetration concrete wall. The cooling ability and heat loss of PCW system has been reviewed with the insulation effect.

  12. New trends in pile safety instrumentation; Les tendances nouvelles dans l'instrumentation de securite des piles

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J.

    1961-04-19

    This report addresses the protection of nuclear piles against damages due to operation incidents. The author discusses the current trends in the philosophy of safety of atomic power piles, identifies the parameters which define safety systems, presents tests to be performed on safety chains, comments the relationship between safety and the decrease of the number of pile inadvertent shutdowns, discusses the issues of instrument failures and chain multiplicity, comments the possible improvement of the operation of elements which build up safety chains (design simplification, development of semiconductors, replacement of electromechanical relays by static relays), the role of safety logical computers and the development of automatics in pile safety, presents automatic control as a safety factor (example of automatic start-up), and finally comments the use of fuses.

  13. Studies of Nuclear Fuel Performance Using On-site Gamma-ray Spectroscopy and In-pile Measurements

    International Nuclear Information System (INIS)

    Matsson, Ingvar

    2006-01-01

    Presently there is a clear trend of increasing demands on in-pile performance of nuclear fuel. Higher target burnups, part length rods and various fuel additives are some examples of this trend. Together with an increasing demand from the public for even safer nuclear power utilisation, this implies an increased focus on various experimental, preferably non-destructive, methods to characterise the fuel. This thesis focuses on the development and experimental evaluation of such methods. In its first part, the thesis presents a method based on gamma-ray spectroscopy with germanium detectors that have been used at various power reactors in Europe. The aim with these measurements is to provide information about the thermal power distribution within fuel assemblies in order to validate core physics production codes. The early closure of the Barsebaeck 1 BWR offered a unique opportunity to perform such validations before complete depletion of burnable absorbers in Gd-rods had taken place. To facilitate the measurements, a completely submersible measuring system, LOKET, was developed allowing for convenient in-pool measurements to be performed. In its second part, the thesis describes methods that utilise in-pile measurements. These methods have been used in the Halden test-reactor for determination of fission gas release, pellet-cladding interaction studies and fuel development studies. Apart from the power measurements, the LOKET device has been used for fission gas release (FGR) measurements on single fuel rods. The significant reduction in fission gas release in the modern fuel designs, in comparison with older designs, has been demonstrated in a series of experiments. A FGR database covering a wide range of burnup, power histories and fuel designs has been compiled and used for fuel performance analysis. The fission gas release has been measured on fuel rods with average burnups well above 60 MWd/kgU. The comparison between core physics calculations (PHOENIX-4/POLCA

  14. Reconfiguring trade mark law

    DEFF Research Database (Denmark)

    Elsmore, Matthew James

    2013-01-01

    -border setting, with a particular focus on small business and consumers. The article's overall message is to call for a rethink of received wisdom suggesting that trade marks are effective trade-enabling devices. The case is made for reassessing how we think about European trade mark law.......First, this article argues that trade mark law should be approached in a supplementary way, called reconfiguration. Second, the article investigates such a reconfiguration of trade mark law by exploring the interplay of trade marks and service transactions in the Single Market, in the cross...

  15. Redirecting International Trade

    DEFF Research Database (Denmark)

    Kokko, Ari; Söderlund, Bengt; Tingvall, Patrik Gustavsson

    2014-01-01

    The global financial crisis has contributed to the redirection of trade towards new markets outside the OECD area, where both demand patterns and the institutional environment differ from those in the OECD. This study provides an empirical examination of the consequences of this shift, based......-specific investments are particularly difficult to redirect towards markets with weak institutions....... on Swedish firm-level trade data. Results suggest that weak institutions hamper trade and reduce the length of trade relations, especially for small firms. Trade in industries that are characterized by a high frequency of trade conflicts and where transactions require extensive relationship...

  16. Redirecting International Trade

    DEFF Research Database (Denmark)

    Kokko, Ari; Söderlund, Bengt; Tingvall, Patrik Gustavsson

    The global financial crisis has accelerated the redirection of trade towards new markets, outside the OECD area, where both demand patterns and the institutional environment differ from those in the OECD. This study provides an empirical examination of the consequences of this shift. Results...... difficult to redirect towards markets with weak institutions....... suggest that weak institutions hamper trade and reduces the length of trade relations, especially for small firms. Furthermore, trade in industries that are characterized by a high degree of trade conflicts and that requires extensive relationship specific investments for trade to occur are comparatively...

  17. Alpha radiation and in-pile annealing effects on the fracture properties of a sintered alumino borosilicate glass

    International Nuclear Information System (INIS)

    Bevilacqua, Arturo M.; Prado, Miguel O.; Messi de Bernasconi, Norma B.; Heredia, Arturo D.; Sanfilippo, Miguel

    1999-01-01

    The alpha radiation and the in-pile during irradiation effects on the hardness, the crack nucleation and the fracture toughness of the German alumino borosilicate glass SG7 were investigated by using the Vickers indentation. Cold pressed and sintered samples were irradiated with thermal neutrons, in the Argentine nuclear reactors RA-3 and RA-6, to produce alpha particles in the whole volume of the glass by means of the (n, alpha)-reaction with B-10. The Vickers hardness, the crack nucleation, as 50 percent fracture probability load, plotted as the Weibull's fracture probability distribution function and the fracture toughness, as critical stress intensity factor K Ic , were correlated to the four cumulative disintegration values. It was ascertained that: a) the Vickers hardness decreases from 5.6 GPa for the non-irradiated sample up to 4.7 GPa for the sample irradiated 70 h at the lower neutron flux (4.0 x 10 - sup 18 - alpha disintegration per cm - sup 3 -), b) the 50 % fracture probability load increases from 1.4 N for the non-irradiated sample up to 4.7 g for the sample irradiated 22 h at the higher flux (6.8 x 10 - sup 18 - alpha disintegration per cm - sup 3 -), and c) the stress intensity factor increases from 0.80 MPa.m - sup 1/2 - for the non irradiated sample up to 0.86 MPa.m - sup 1/2 - for the sample mentioned in b). The in-pile annealing was analyzed by comparing the crack nucleation after irradiation with data obtained by heavy ion irradiation followed by thermal annealing. Results for the SG7 glass were compared to those for soda-lime and borosilicate glasses. (author)

  18. Discovering Preferential Patterns in Sectoral Trade Networks.

    Science.gov (United States)

    Cingolani, Isabella; Piccardi, Carlo; Tajoli, Lucia

    2015-01-01

    We analyze the patterns of import/export bilateral relations, with the aim of assessing the relevance and shape of "preferentiality" in countries' trade decisions. Preferentiality here is defined as the tendency to concentrate trade on one or few partners. With this purpose, we adopt a systemic approach through the use of the tools of complex network analysis. In particular, we apply a pattern detection approach based on community and pseudocommunity analysis, in order to highlight the groups of countries within which most of members' trade occur. The method is applied to two intra-industry trade networks consisting of 221 countries, relative to the low-tech "Textiles and Textile Articles" and the high-tech "Electronics" sectors for the year 2006, to look at the structure of world trade before the start of the international financial crisis. It turns out that the two networks display some similarities and some differences in preferential trade patterns: they both include few significant communities that define narrow sets of countries trading with each other as preferential destinations markets or supply sources, and they are characterized by the presence of similar hierarchical structures, led by the largest economies. But there are also distinctive features due to the characteristics of the industries examined, in which the organization of production and the destination markets are different. Overall, the extent of preferentiality and partner selection at the sector level confirm the relevance of international trade costs still today, inducing countries to seek the highest efficiency in their trade patterns.

  19. Measurement data of cesium 137 yields in primary coolant of an in-pile water loop in fission products release experiment

    International Nuclear Information System (INIS)

    Ishiwatari, Nasumi; Nagai, Hitoshi; Takeda, Tsuneo

    1979-03-01

    Series of fuel rods (UO 2 pellets sheathed with stainless steel) having an artificial pinhole were irradiated in the in-pile test section of water loop JMTR OWL-1. Presented are the results of measurements of cesium 137 yields in primary coolant of OWL-1 from 1975 to 1978. (author)

  20. Trade in goods

    DEFF Research Database (Denmark)

    Sørensen, Karsten Engsig

    2006-01-01

    An analysis of the rules governing trade in goods under the GATT agreement and the Agreement on Safeguards......An analysis of the rules governing trade in goods under the GATT agreement and the Agreement on Safeguards...

  1. Trade Agreements PTI

    Data.gov (United States)

    Department of Homeland Security — The objective of the Trade Agreements PTI is to advance CBP’s mission by working with internal and external stakeholders to facilitate legitimate trade and address...

  2. Trade, Labor, Legitimacy

    OpenAIRE

    Guzman, Andrew

    2003-01-01

    The relationship between international trade and labor standards is one of several controversial issues facing the WTO. Proponents of a trade-labor link argue that labor is a human rights issue and that trade sanctions represent a critical tool in the effort to improve international working conditions. Opponents argue that a link between trade and labor would open the door to protectionist measures that would target low wage countries and harm the very workers the policy is intended to help. ...

  3. Individual Attitudes Towards Trade

    DEFF Research Database (Denmark)

    Jäkel, Ina Charlotte; Smolka, Marcel

    2013-01-01

    Using the 2007 wave of the Pew Global Attitudes Project, this paper finds statistically significant and economically large Stolper-Samuelson effects in individuals’ preference formation towards trade policy. High-skilled individuals are substantially more pro-trade than low-skilled individuals......-Ohlin model in shaping free trade attitudes, relative to existing literature....

  4. Trade Remedies: A Primer

    National Research Council Canada - National Science Library

    Jones, Vivian C

    2006-01-01

    The United States and many of its trading partners use laws known as trade remedies to mitigate the adverse impact of various trade practices on domestic industries and workers. U.S. antidumping laws (19 U.S.C. 1673 et seq...

  5. Trade Remedies: A Primer

    National Research Council Canada - National Science Library

    Jones, Vivian C

    2007-01-01

    The United States and many of its trading partners use laws known as trade remedies to mitigate the adverse impact of various trade practices on domestic industries and workers. U.S. antidumping (AD) laws (19 U.S.C. 1673 et seq...

  6. Trade Remedies: A Primer

    National Research Council Canada - National Science Library

    Jones, Vivian C

    2008-01-01

    The United States and many of its trading partners use laws known as trade remedies to mitigate the adverse impact of various trade practices on domestic industries and workers. U.S. antidumping (AD) laws (19 U.S.C. 1673 et seq...

  7. Banking and Trading

    NARCIS (Netherlands)

    Boot, A.W.A.; Ratnovski, L.

    2016-01-01

    We study the interaction between relationship banking and short-term arm’s length activities of banks, called trading. We show that a bank can use the franchise value of its relationships to expand the scale of trading, but may allocate too much capital to trading ex post , compromising its ability

  8. Virtual water trade and development in Africa

    Science.gov (United States)

    Konar, Megan; Caylor, Kelly

    2014-05-01

    A debate has long existed on the relationships between human population, natural resources, and development. Recent research has expanded this debate to include the impacts of trade; specifically, virtual water trade, or the water footprint of traded commodities. We conduct an empirical analysis of the relationships between virtual water trade, population, and development in Africa. We find that increases in virtual water imports do not lead to increases in population growth nor do they diminish human welfare. We establish a new index of virtual water trade openness and show that levels of undernourishment tend to fall with increased values of virtual water trade openness. Countries with small dam storage capacity obtain a higher fraction of their agricultural water requirements from external sources, which may indicate implicit `infrastructure sharing' across nations. Globally, increased crop exports tends to correlate with increased crop water use efficiency, though this relationship does not hold for Africa. However, internal African trade is much more efficient in terms of embodied water resources than any other region in the world. Thus, internal African trade patterns may be compensating for poor internal production systems.

  9. Virtual water trade and development in Africa

    Directory of Open Access Journals (Sweden)

    M. Konar

    2013-10-01

    Full Text Available A debate has long existed on the relationships between human population, natural resources, and development. Recent research has expanded this debate to include the impacts of trade; specifically, virtual water trade, or the water footprint of traded commodities. We conduct an empirical analysis of the relationships between virtual water trade, population, and development in Africa. We find that increases in virtual water imports do not lead to increases in population growth nor do they diminish human welfare. We establish a new index of virtual water trade openness and show that levels of undernourishment tend to fall with increased values of virtual water trade openness. Countries with small dam storage capacity obtain a higher fraction of their agricultural water requirements from external sources, which may indicate implicit "infrastructure sharing" across nations. Globally, increased crop exports tend to correlate with increased crop water use efficiency, though this relationship does not hold for Africa. However, internal African trade is much more efficient in terms of embodied water resources than any other region in the world. Thus, internal African trade patterns may be compensating for poor internal production systems.

  10. The uranium International trade

    International Nuclear Information System (INIS)

    Gonzalez U, L.A.

    1993-01-01

    The aim of this thesis is the understanding of how the present dynamic of uranium International trade is developed, the variables which fall into, the factors that are affecting and conditioning it, in order to clarify which are going to be the outlook in the future of this important resource in front of the present ecological situation and the energetic panorama of XXI Century. For this purpose, as starting point, the uranium is considered as a strategic material which importance take root in its energetic potential as alternate energy source, and for this reason in Chapter I, the general problem of raw materials, its classification and present situation in the global market is presented. In Chapter II, by means of a historical review, is explain what uranium is, how it was discovered, and how since the end of the past Century and during the last three decades of present, uranium pass of practically unknown element, to the position of a strategic raw material, which by degrees, generate an International market, owing to its utilization as a basic resource in the generation of energy. Chapter III, introduce us in the roll played by uranium, since its warlike applications until its utilization in nuclear reactors for the generation of electricity. Also is explain the reason for this change in the perception at global level. Finally, in Chapter IV we enter upon specifically in the present conditions of the International market of this mineral throughout the trends of supply and demand, the main producers, users, price dynamics, and the correlation among these economical variables and other factors of political, social and ecological nature. All of these with the purpose to found out, if there exist, a meaning of the puzzle that seems to be the uranium International trade

  11. Crisis, Compromise and Institutional Leadership in Global Trade: Unfair Trade, Sustainable Trade, and Durability of the Liberal Trading Order

    DEFF Research Database (Denmark)

    Mortensen, Jens L.

    2017-01-01

    The transformations of the current liberal order is fiercely order debate among liberals and realists in International Relations (IR). The article examines how the liberal claim of institutional leadership, even in complex networked orders, is challenged by realists and the reality of forum......-shifting and institutionalized hegemonic power. Yet, the article advances the constructivists argument that order and leadership rests on the compromise of social purpose and power, even if much IR tends to prioritize the domestic sources of leadership at the expense of international sources of institutional leadership......, and in light of recent modernization debate in Europe on the desirability of US-style enforcement provisions in future EU trade agreements....

  12. In-Pile Testing and Instrumentation for Development of Generation-IV Fuels and Materials. Proceedings of a Technical Meeting

    International Nuclear Information System (INIS)

    2013-12-01

    For many years, the increase in efficiency in the production of nuclear electricity has been an economic challenge in many countries which have developed this kind of energy. The increase in fuel burnup and fuel residence time leads to a reduction in the volume of fresh fuel loaded and spent fuel discharged, respectively. More demanding nuclear fuel cycle parameters are combined with a need to operate nuclear power plants with maximal availability and load factors, in load-follow mode and with longer fuel cycles. In meeting these requirements, fuel has to operate in a demanding environment of high radiation fields, high temperatures, high mechanical stresses and high coolant flow. Requirements of increased fuel reliability and minimal fuel failures also remain in force. Under such circumstances, continuous development of more radiation resistant fuel materials, especially advanced cladding, careful and incremental examinations, and improved understanding and modelling of high burnup fuel behaviour are required. Following a recommendation of the IAEA Technical Working Group on Fuel Performance and Technology, the Technical Meeting on In-pile Testing and Instrumentation for Development of Generation-IV Fuels and Materials was held in Halden, Norway, on 21-24 August 2012. The purpose of the meeting was to review the current status and the progress in methods and technologies used for the in-pile testing of nuclear fuel achieved since the previous IAEA meeting on In-core Instrumentation and Reactor Core Assessment, also held in Halden in 2007. Emphasis was placed on advanced techniques applied for the understanding of high burnup fuel behaviour of water cooled power reactors that represent the vast majority of the current nuclear reactor fleet. However, the meeting also included papers and discussion on testing techniques applied or developed specifically for new fuel and structural materials considered for Generation-IV systems. The meeting was attended by 43

  13. Parametric analysis of LIBRETTO-4 and 5 in-pile tritium transport model on EcosimPro

    Energy Technology Data Exchange (ETDEWEB)

    Alcalde, Pablo Martínez, E-mail: pablomiguel.martinez@externos.ciemat.es [Universidad Nacional de Educación a Distancia (UNED), c/Juan del Rosal 12, 28040 Madrid (Spain); Moreno, Carlos; Ibarra, Ángel [CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain)

    2014-10-15

    Highlights: • Introduction of a new tritium transport model of LIBRETTO-4 and 5 on EcosimPro{sup ®}. • Analysis of model input parameter and variable sensitivities and effects on tritium simulated fluxes. • Demonstrations of high tritium out-flux dependencies on lead-lithium parameters. • Rough fitting achievements proposed by Li17Pb solubility or recombination increase. - Abstract: A new model for LIBRETTO-4/1, 4/2 and 5 experiments have been developed on ECOSIMPro{sup ©} tool to simulate tritium in-pile breeding and transport into two separate purge gas channels with He + 0.1%H{sub 2}. Release from lead lithium eutectic plenum with coupled permeation through an austenitic steel wall on the first and single permeation through EUROFER-97 in the temperature ranges of 300–550 °C can be simulated tuning the transport parameters involved. A parametric study has been performed to reduce the degrees of freedom and to determine the error caused in the simulation due to the uncertainty in experimental input data. The information obtained is essential for the experimental benchmarking. The Tritium Permeation Percentage (TPP) is an output calculated parameter with low variations between 2 and 6% along the whole experimental time easy to compare (730 Full Power Days for LIBRETTO-4 and 520 for 5). Tritium transport parameter ranges verifying this output are defined herein.

  14. Thermal-hydraulic analyses for in-pile SCWR fuel qualification test loops and SCWR material loop

    Energy Technology Data Exchange (ETDEWEB)

    Vojacek, A.; Mazzini, G.; Zmitkova, J.; Ruzickova, M. [Research Centre Rez (Czech Republic)

    2014-07-01

    One of the R&D directions of Research Centre Rez is dedicated to the supercritical water-cooled reactor concept (SCWR). Among the developed experimental facilities and infrastructure in the framework of the SUSEN project (SUStainable ENergy) is construction and experimental operation of the supercritical water loop SCWL focusing on material tests. At the first phase, this SCWL loop is assembled and operated out-of-pile in the dedicated loop facilities hall. At this out-of-pile operation various operational conditions are tested and verified. After that, in the second phase, the SCWL loop will be situated in-pile, in the core of the research reactor LVR-15, operated at CVR. Furthermore, it is planned to carry out a test of a small scale fuel assembly within the SuperCritical Water Reactor Fuel Qualification Test (SCWR-FQT) loop, which is now being designed. This paper presents the results of the thermal-hydraulic analyses of SCWL loop out-of-pile operation using the RELAP5/MOD3.3. The thermal-hydraulic modeling and the performed analyses are focused on the SCWL loop model validation through a comparison of the calculation results with the experimental results obtained at various operation conditions. Further, the present paper focuses on the transient analyses for start-up and shut-down of the FQT loop, particularly to explore the ability of system codes ATHLET 3.0A to simulate the transient between subcritical conditions and supercritical conditions. (author)

  15. In-pile test of Li{sub 2}TiO{sub 3} pebble bed with neutron pulse operation

    Energy Technology Data Exchange (ETDEWEB)

    Tsuchiya, K. E-mail: tsuchiya@oarai.jaeri.go.jp; Nakamichi, M.; Kikukawa, A.; Nagao, Y.; Enoeda, M.; Osaki, T.; Ioki, K.; Kawamura, H

    2002-12-01

    Lithium titanate (Li{sub 2}TiO{sub 3}) is one of the candidate materials as tritium breeder in the breeding blanket of fusion reactors, and it is necessary to show the tritium release behavior of Li{sub 2}TiO{sub 3} pebble beds. Therefore, a blanket in-pile mockup was developed and in situ tritium release experiments with the Li{sub 2}TiO{sub 3} pebble bed were carried out in the Japan Materials Testing Reactor. In this study, the relationship between tritium release behavior from Li{sub 2}TiO{sub 3} pebble beds and effects of various parameters were evaluated. The (R/G) ratio of tritium release (R) and tritium generation (G) was saturated when the temperature at the outside edge of the Li{sub 2}TiO{sub 3} pebble bed became 300 deg. C. The tritium release amount increased cycle by cycle and saturated after about 20 pulse operations.

  16. In-pile experimental device for Sirene thermionic converters; Dispositif d'experimentation en pile des convertisseurs thermoioniques sirene

    Energy Technology Data Exchange (ETDEWEB)

    Bliaux, J; Durand, J; Lazare-Chopard, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The irradiation device described here, was built for in pile life tests of 100 We SIRENE converters. The nuclear converter is located in a sealed vacuum chamber, which is plugged at the lower end of a coaxial tubing acting as electrical leads. The output power is available on a variable resistive load on the bank of the reactor pool. Thermal, electrical and neutronic parameters of the converter are recorded. Since 1967, two permanent devices allowed five experiments in the swimming pool TRITON (CEN-FAR) and the results, obtained till now, are presented. (authors) [French] Le dispositif d'irradiation SIRENE decrit ici a ete concu en vue d'une etude statistique de performances de convertisseurs thermoioniques nucleaires de puissance unitaire 100 We. Le dispositif doit assurer la bonne marche du convertisseur en pile, permettre le changement de la position verticale du convertisseur dans le coeur, sortir du coeur la puissance electrique convertie sans degradation notable et enregistrer les differents parametres thermiques, electriques et neutroniques du convertisseur. Depuis 1967, deux dispositifs fonctionnent en permanence et ont permis de faire cinq experiences dans le reacteur piscine TRITON du CEN-FAR. Les resultats obtenus jusqu'a present, sont presentes. (auteurs)

  17. Some aspects of in-pile swelling of fissile materials, 1. part: non-alloyed α uranium

    International Nuclear Information System (INIS)

    Mikailoff, H.

    1964-01-01

    An examination has been carried out of non-alloyed uranium samples, having various structural states, cold-worked and recrystallized, as-cast and β-treated, and irradiated at temperatures of between 450 and 600 C and with burn-ups from 1300 to 5500 MW days/metric ton. These samples swelled because of precipitation of the fission gases the porosity thus produced has a morphology depending mainly on the type of deformation to which the metal has been subjected and which is due to in-pile growth. The most homogeneous distribution of pores, and thus that leading to the minimum swelling, is only observed in the material having a marked [010] texture in which the growth and perhaps the thermal cycling introduce little or no strain. For other materials the deformation /swelling association causes a more rapid destruction of the samples either by cracking when the deformation is due to twinning, or by pronounced swelling localized in the bands when deformation is due to slipping. Finally the fission-gas precipitation considerably facilitates, above 500 C, the germination and growth of the intergranular cracks which can then develop at low stresses. (author) [fr

  18. Analysis of ULOF accident in Monju reflecting the knowledge from CABRI in-pile experiments and others

    International Nuclear Information System (INIS)

    Sato, Ikken; Tobita, Yoshiharu; Suzuki, Tohru; Kawada, Ken-ichi; Fukano, Yoshitaka; Fujita, Satoshi; Kamiyama, Kenji; Ishikawa, Makoto; Nonaka, Nobuyuki; Usami, Shin

    2007-05-01

    In the safety evaluation in the original licensing procedure of the prototype FBR Monju, mechanical energy release during an unprotected loss-of-flow (ULOF) event, one of technically inconceivable events postulated beyond design basis, was evaluated and shown that the radiological consequence is suitably limited. Since the sodium leakage accident in the secondary heat-transport system, the Monju plant has been kept under the stand-by condition for more than ten years and the composition of fuel in the current reactor core has changed due to decay of a plutonium isotope into americium. This change in fuel composition affects the neutronic characteristics of the core, requiring assessment of its effect on safety. In this study, event sequences of ULOF were analyzed to assess the effect of the change in neutronic characteristics on the mechanical energy release during ULOF. A significant advance has been made in the safety analysis codes reflecting the knowledge obtained through extensive safety research programs in the last decades, notably the CABRI in-pile experiments. The present results with the advanced analysis codes showed that the mechanical energy release in the current Monju core with the changed neutronic characteristics would not exceed the value evaluated formerly. (author)

  19. Results of postirradiation examination of the in-pile blockage experiments MOL-7C/4 and MOL-7C/5

    International Nuclear Information System (INIS)

    Weimar, P.; Schleisiek, K.

    1991-01-01

    The Mol-7C in-pile local blockage experiments are performed in the BR-2 reactor at Mol, Belgium as a joint project of Kernforchungszentrum Karlsruhe (KfK) and Studiecentrum voor Kernenergie/Centre d'Etude de l'Energie Nuclearire-Mol. The main objective is to investigate the consequences of local cooling disturbances in liquid-metal-cooled reactor (LMR) fuel subassemblies. In the tests Mol-7C/4 and MOL-7C/5, fuel pins from KNK II are used with a burnup of 5 and 1.7%, respectively. An active central porous blockage is used to simulate the cooling disturbance. During irradiation, the blockage causes significant local damage, including melting of cladding and fuel. Extensive postirradiation examinations (PIE) are performed to investigate the extent of damage. In this paper a description and interpretation of results of the destructive PIE performed at the Hot Cells Laboratory at KfK is given, along with some conclusions related to LMR safety

  20. BP's emissions trading system

    International Nuclear Information System (INIS)

    Victor, David G.; House, Joshua C.

    2006-01-01

    Between 1998 and 2001, BP reduced its emissions of greenhouse gases by more than 10%. BP's success in cutting emissions is often equated with its use of an apparently market-based emissions trading program. However no independent study has ever examined the rules and operation of BP's system and the incentives acting on managers to reduce emissions. We use interviews with key managers and with traders in several critical business units to explore the bound of BP's success with emissions trading. No money actually changed hands when permits were traded, and the main effect of the program was to create awareness of money-saving emission controls rather than strong price incentives. We show that the trading system did not operate like a 'textbook' cap and trade scheme. Rather, the BP system operated much like a 'safety valve' trading system, where managers let the market function until the cost of doing so surpassed what the company was willing to tolerate

  1. Greenhouse gas trading

    Energy Technology Data Exchange (ETDEWEB)

    Drazilov, P. [Natsource-Tullett Emissions Brokerage, Toronto, ON (Canada)

    2001-07-01

    Natsource-Tullett Emissions Brokerage is a market leader in natural gas, electricity, coal, and weather, emissions with a total of more than $2 billion by volume in emissions transactions in the United States, Canada, Australia, Japan, and Europe. This power point presentation addressed issues dealing with global warming, the Kyoto Protocol, and explained where we are in terms of reaching commitments for the first compliance period between 2008-2012. The paper focused on international emissions trading (IET), joint implementation (JI) and the clean development mechanism (CDM) and explained how greenhouse gases are traded. Emissions trading refers to the trade of carbon dioxide, methane, nitrous oxides, perfluoro-carbons, hydrofluorocarbons, and sulphur hexafluorides. The motivational drivers for trading were outlined in terms of liability for buyers and assets for sellers. To date, trading activity is nearly 120 transactions with nearly 70 million tons of carbon dioxide equivalent. tabs., figs.

  2. Bitcoin trading system

    OpenAIRE

    Turšič, Samo

    2015-01-01

    In this thesis an information solution was developed that enables the implementation of different trading strategies and backtesting over cryptocurrency Bitcoin trading data. Supported exchanges are Bitstamp, BTC-e and MtGox. In the field of technical analysis there already exist various solutions for Bitcoin that help traders to trade and advise them on basis of technical indicators and patterns. However, each has its own drawbacks, which we are aiming to fix. A web application was developed...

  3. Bitcoin trading system

    OpenAIRE

    Turšič, Samo

    2014-01-01

    In this thesis an information solution was developed that enables the implementation of different trading strategies and backtesting over cryptocurrency Bitcoin trading data. Supported exchanges are Bitstamp, BTC-e and MtGox. In the field of technical analysis there already exist various solutions for Bitcoin that help traders to trade and advise them on basis of technical indicators and patterns. However, each has its own drawbacks, which we are aiming to fix. A web application was developed...

  4. International trade and inequality

    OpenAIRE

    Urata, Sh¯ujir¯o; Narjoko, Dionisius A.

    2017-01-01

    The impact of globalization on equality has become a serious concern for many countries. More evidence that challenges the theoretical prediction of positive impact of international trade on income distribution has increasingly become available recently. This paper addresses this subject, surveying the empirical findings on the impact of international trade on inequalities from various perspectives. The survey reveals that an increase in trade openness by developing countries appears to have ...

  5. International Organizations and Trade

    OpenAIRE

    Antras, Pol

    2010-01-01

    The three central primitives of international trade theory are consumer preferences, factor endowments, and the production technologies that allow firms to transform factors of production into consumer goods. A limitation of traditional trade theory, however, is that the specification of technology treats the mapping between factors of production and final goods as a black box. In practice, the decisions of agents in organizations determine this mapping. Recently, international trade economis...

  6. Racial Trade Barriers?

    DEFF Research Database (Denmark)

    Bjerre, Jacob Halvas

    . This paper analyzes the racial policies pursued in the foreign trade and argues that we need to recognize Aryanization as a world-wide policy in order to fully understand its character and possible consequences. I focus on the pre-war period and analyze the case of Denmark from three different perspectives......: perpetrators, victims and bystanders. The analysis will show that race, economy and foreign trade were combined in an attempt to raise racial trade barriers. This forced the question of German racial policies on the Danish government, Danish-Jewish businesses, and German companies involved in foreign trade...

  7. International emissions trading

    DEFF Research Database (Denmark)

    Boom, Jan Tjeerd

    This thesis discusses the design and political acceptability of international emissions trading. It is shown that there are several designs options for emissions trading at the national level that have a different impact on output and thereby related factors such as employment and consumer prices....... The differences in impact of the design make that governments may prefer different designs of emissions trading in different situations. The thesis furthermore establishes that international emissions trading may lead to higher overall emissions, which may make it a less attractive instrument....

  8. Trade in health services.

    Science.gov (United States)

    Chanda, Rupa

    2002-01-01

    In light of the increasing globalization of the health sector, this article examines ways in which health services can be traded, using the mode-wise characterization of trade defined in the General Agreement on Trade in Services. The trade modes include cross- border delivery of health services via physical and electronic means, and cross-border movement of consumers, professionals, and capital. An examination of the positive and negative implications of trade in health services for equity, efficiency, quality, and access to health care indicates that health services trade has brought mixed benefits and that there is a clear role for policy measures to mitigate the adverse consequences and facilitate the gains. Some policy measures and priority areas for action are outlined, including steps to address the "brain drain"; increasing investment in the health sector and prioritizing this investment better; and promoting linkages between private and public health care services to ensure equity. Data collection, measures, and studies on health services trade all need to be improved, to assess better the magnitude and potential implications of this trade. In this context, the potential costs and benefits of trade in health services are shaped by the underlying structural conditions and existing regulatory, policy, and infrastructure in the health sector. Thus, appropriate policies and safeguard measures are required to take advantage of globalization in health services. PMID:11953795

  9. Defense Trade Data: Sources and Recommendations

    Science.gov (United States)

    2010-11-01

    Sabre reconnaissance vehicles and Spartan, Stormer and FV-432 Bulldog APC $144m deaJ GBP70 m ($126-129 m) deal; BGM-109 Tomahawk Block-JV (Tactical...6BTA-5.9 version;; for 189 BvS-10 APC from Sweden and modernization of some 2100 Scimitar and Sabre reconnaissance vehicles and Spartan. Stormer ...Viking CV variant 29 AFV 432 1487 Stormer APC 147 CVR(T) Scimitar 322 CVR(T) Spartan 494 CVR(T) Sturgeon 35 CVR(T) Salamander 32 Saxon 147

  10. A simple continuous flow cryostat for low temperature experiments in pile

    International Nuclear Information System (INIS)

    Yanagi, Hideharu; Tamura, Takaaki; Tabata, Yoneho

    1978-01-01

    A conventional liquid bath type cryostat connected with a helium refrigerator has been used for the irradiation at very low temperatures in a fast neutron source reactor, YAYOI. In order to start the experiments with the cryostat, it takes 4 to 6 hours to cool down and get ready for irradiation. Furthermore, it was not possible to transfer irradiated samples from the cryostat for irradiation to the other for measurements of electron spin resonance and resistivity, keeping the temperature of liquid helium. Accordingly a simple and convenient cryostat which is capable of providing a wide range of temperatures from liquid helium to 300K, as well as transferring samples with less complexity had been required. In this paper, the design and fabrication of a simple continuous flow cryostat to meet our requirements mentioned above is reported. Cooling time and the consumption rate of liquid helium during the operation at 4.2K under an output of the nuclear reactor of 500W are designed to be less than 30 minutes and less than 7 litres/hour, respectively. (author)

  11. A simple continuous flow cryostat for low temperature experiments in pile

    International Nuclear Information System (INIS)

    Yanagi, Hideharu; Tamura, Takaaki; Tabata, Yoneho

    1978-01-01

    A conventional liquid bath type cryostat connected with a helium refrigerator has been used for the irradiation at very low temperatures in a fast neutron source reactor, YAYOI. In order to start the experiments with the cryostat, it takes 4 to 6 hours to cool down and get ready for irradiation. Furthermore, it was not possible to transfer irradiated samples from the cryostat for irradiation to the other for measurements of electron spin resonance and resistivity keeping the temperature of liquid helium. Accordingly a simple and convenient cryostat which is capable of providing a wide range of temperatures from liquid helium to 300K, as well as transfering samples with less complexity had been required. In this paper, the design and fabrication of a simple continuous flow cryostat to meet our requirements mentioned above is reported. Cooling time and the consumption rate of liquid helium during the operation at 4.2K under a output of the nuclear reactor of 500W are designed to be less than 30 minutes and less than 7 litres/hour, respectively. (author)

  12. Summarizing evaluation of the results of in-pile experiments for the transient fission gas release under accidental conditions of fast breeders

    International Nuclear Information System (INIS)

    Fischer, E.A.; Vaeth, L.

    1989-04-01

    The transient fission gas behaviour and the fission gas induced fuel motion were studied in in-pile experiments in different countries, under conditions typical for hypothetical accidents. This report summarizes first the different experiment series and the main results. Then, a comparative evaluation is given, which provides a basis for the choice of the fission gas parameters in the accident code SAS3D

  13. Thermal annealing behaviour of sulphur-35 produced in pile-irradiated mixed crystals AlCl/sub 3/-FeCl/sub 3/

    Energy Technology Data Exchange (ETDEWEB)

    Dyakovich, V; Todorovski, D S; Kostadinova, Z D [Sofia Univ. (Bulgaria). Khimicheski Fakultet

    1983-12-19

    The regression analysis of the experimental results on the thermal annealing behaviour of /sup 35/S produced in pile-irradiated mixed crystals AlCl/sub 3/-FeCl/sub 3/ confirms some suppositions made in a previous paper. The chemical state of /sup 35/S is defined by the target prehistory and the iron concentration. The influence of Fe/sup 3 +/ can be observed indirectly through its influence on the defect structure formed.

  14. International provision of trade services, trade, and fragmentation

    OpenAIRE

    Deardorff, Alan V.

    2001-01-01

    The author examines the special role that trade liberalization in services industries can play in stimulating trade in both services, and goods. International trade in goods requires inputs from such trade services as transportation, insurance, and finance, for example. Restrictions on services across borders, and within foreign countries add costs, and barriers to international trade. Lib...

  15. INDONESIAN TRADE UNDER CHINA FREE TRADE AREA

    Directory of Open Access Journals (Sweden)

    Tavi Supriana

    2011-09-01

    Full Text Available This paper investigates the implementation of CAFTA (China-Asean Free Trade Area on the international trade flows across Indonesia, China and the rest of ASEAN using a gravitation model. It finds the evidence that the influence of diversion and creation effects on China are significant, while the influence of both effects on Indonesia are not significant. It also finds that the diversion effect, which leads to a decrease in society’s wealth, is greater than that of the creation effect. As a consequence, the gap across countries involved in the trade agreement is wider. Keywords: CAFTA, gravitation model, diversion effect, creation effectJEL classification numbers: F13, F14, F15

  16. Trading behaviour on the continuous intraday market ELBAS

    International Nuclear Information System (INIS)

    Scharff, Richard; Amelin, Mikael

    2016-01-01

    Intraday markets for electricity allow for trading of energy until shortly before the period of delivery. This offers market participants a possibility to reduce their expected imbalances and to offer own unused flexibility. Because this form of distributed balancing before the period of delivery can be profitable for market participants as well as beneficial for system operations, intraday trading is expected to gain more importance in future, especially with increasing shares of variable renewable energy sources in the generation mix. So far, intraday markets are still a research field with many open questions. This paper contributes by a first analysis of intraday trades on ELBAS, one of the European intraday markets. The analysis gives a detailed picture on trading activity and price development and is intended to improve understanding of continuous intraday trading. Findings include that trading activity differs significantly between price zones, that most trades occur in the last hours before gate closure and that market participants have to handle substantial price variations during the trading period. The paper also investigates the imbalance settlement rules in the Nordic countries and studies which effects one- and two-price imbalance settlement systems have on the market participants' profitability of intraday trading. - Highlights: • Insights into intraday trading: trading activity and price development. • Special focus is on characteristics of continuous trading. • Intrinsic problems in the Nordic imbalance pricing scheme are discussed. • Implications regarding balancing of generation from vRES.

  17. Verification of tritium production evaluation procedure using Monte Carlo code MCNP for in-pile test of fusion blanket with JMTR

    Energy Technology Data Exchange (ETDEWEB)

    Nagao, Y. E-mail: nagao@jmtr.oarai.jaeri.go.jp; Nakamichi, K.; Tsuchiya, M.; Ishitsuka, E.; Kawamura, H

    2000-11-01

    To evaluate exactly the total amount of tritium production in tritium breeding materials during in-pile test with JMTR, the 'tritium monitor' has been produced and evaluation of total tritium generation was done by using 'tritium monitor' in preliminary in-pile mock-up, and verification of procedure concerning tritium production evaluation was conducted by using Monte Carlo code MCNP and nuclear cross section library of FSXLIBJ3R2. Li-Al alloy (Li 3.4 wt.%, 95.5% enrichment of {sup 6}Li) was selected as tritium monitor material for the evaluation on the total amount of tritium production in high {sup 6}Li enriched materials. From the results of preliminary experiment, calculated amounts of total tritium production at each 'tritium monitor', which was installed in the preliminary in-pile mock-up, were about 50-290% higher than the measured values. Concerning tritium measurement, increase of measurement error in tritium leak form measuring system to measure small amount of tritium (0.2-0.7 mCi in tritium monitor) was found in the results of present experiment. The tendency for overestimation of calculated thermal neutron flux in the range of 1-6x10{sup 13} n cm{sup -2} per s was found in JMTR and the reason may be due to the beryllium cross section data base in JENDL3.2.

  18. In-pile creep behaviour of Zry-4 and ZrNb3Sn1 cladding under uniaxial and biaxial stress

    International Nuclear Information System (INIS)

    Boehner, G.; Wildhagen, B.; Wilhelm, H.

    1987-01-01

    An irradiation programme - started in 1977 - was performed at the research reactor FRG-2 at Geesthacht, Germany, as a joint project of GKSS and KWU in order to study the in-pile creep behaviour of zirconium alloy cladding tubes of PWR fuel rods. The test objective was to establish a data base which allows refined modelling of the in-pile creep phenomenon. A wide test matrix was realized in which each of the precisely monitored test conditions (hoop stress, temperature, fast neutron flux) was varied separately. Different cladding materials (Zircaloy-4 and Zirconium-Niob-Tin alloy ZrNb3Sn1) were subjected to those varying test conditions. Cladding tube specimens of 10.75 mm outer diameter were irradiated in test capsules under various stress conditions and levels up to approx. 6000 h, at temperatures ranging from 300 0 C to 400 0 C and fast neutron flux (E > 1 MeV) of approx. 3x10 13 cm -2 .s -1 . Diametrical and/or axial creep deformation of all tubes were measured in the Hot Cells several times in the course of the tests. In order to extract the irradiation induced creep strain some out-pile experiments were carried out under the very same test conditions as the in-pile tests concerned. (orig./GL)

  19. Verification of tritium production evaluation procedure using Monte Carlo code MCNP for in-pile test of fusion blanket with JMTR

    International Nuclear Information System (INIS)

    Nagao, Y.; Nakamichi, K.; Tsuchiya, M.; Ishitsuka, E.; Kawamura, H.

    2000-01-01

    To evaluate exactly the total amount of tritium production in tritium breeding materials during in-pile test with JMTR, the 'tritium monitor' has been produced and evaluation of total tritium generation was done by using 'tritium monitor' in preliminary in-pile mock-up, and verification of procedure concerning tritium production evaluation was conducted by using Monte Carlo code MCNP and nuclear cross section library of FSXLIBJ3R2. Li-Al alloy (Li 3.4 wt.%, 95.5% enrichment of 6 Li) was selected as tritium monitor material for the evaluation on the total amount of tritium production in high 6 Li enriched materials. From the results of preliminary experiment, calculated amounts of total tritium production at each 'tritium monitor', which was installed in the preliminary in-pile mock-up, were about 50-290% higher than the measured values. Concerning tritium measurement, increase of measurement error in tritium leak form measuring system to measure small amount of tritium (0.2-0.7 mCi in tritium monitor) was found in the results of present experiment. The tendency for overestimation of calculated thermal neutron flux in the range of 1-6x10 13 n cm -2 per s was found in JMTR and the reason may be due to the beryllium cross section data base in JENDL3.2

  20. Biological trade and markets.

    Science.gov (United States)

    Hammerstein, Peter; Noë, Ronald

    2016-02-05

    Cooperation between organisms can often be understood, like trade between merchants, as a mutually beneficial exchange of services, resources or other 'commodities'. Mutual benefits alone, however, are not sufficient to explain the evolution of trade-based cooperation. First, organisms may reject a particular trade if another partner offers a better deal. Second, while human trade often entails binding contracts, non-human trade requires unwritten 'terms of contract' that 'self-stabilize' trade and prevent cheating even if all traders strive to maximize fitness. Whenever trading partners can be chosen, market-like situations arise in nature that biologists studying cooperation need to account for. The mere possibility of exerting partner choice stabilizes many forms of otherwise cheatable trade, induces competition, facilitates the evolution of specialization and often leads to intricate forms of cooperation. We discuss selected examples to illustrate these general points and review basic conceptual approaches that are important in the theory of biological trade and markets. Comparing these approaches with theory in economics, it turns out that conventional models-often called 'Walrasian' markets-are of limited relevance to biology. In contrast, early approaches to trade and markets, as found in the works of Ricardo and Cournot, contain elements of thought that have inspired useful models in biology. For example, the concept of comparative advantage has biological applications in trade, signalling and ecological competition. We also see convergence between post-Walrasian economics and biological markets. For example, both economists and biologists are studying 'principal-agent' problems with principals offering jobs to agents without being sure that the agents will do a proper job. Finally, we show that mating markets have many peculiarities not shared with conventional economic markets. Ideas from economics are useful for biologists studying cooperation but need

  1. How fair is fair trade?

    NARCIS (Netherlands)

    Maseland, Robbert; Vaal, Albert de

    2001-01-01

    This paper investigates to what extent fair trade programmes, are indeed ‘fair’. This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost

  2. ROMANIAN INVESTORS PORTFOLIO. ONLINE VERSUS ASSISTED TRADING

    Directory of Open Access Journals (Sweden)

    Ioana Ancuţa IANCU

    2017-05-01

    Full Text Available One of the most important aspects in deciding to trade online, alone, without the help of a broker, is the portfolio profitability. In this study, using the personal experience, survey data and secondary sources, we identify some factors that may influence the gain and the loss of investors which trade online. Our study contradicts other results from literature that claim that the transition from assisted to online trading is a big drawback in terms of portfolio profitability. By analyzing the performance of the portfolio when passing from assisted to online trading, we observe that half of the investors achieved identical profitability. We also observed that the efficiency of the portfolios belonging to the online investors that were assisted in the past by a broker for a short period, is lower compared to the ones assisted (in the past for a longer period.

  3. Networks of global bird invasion altered by regional trade ban.

    Science.gov (United States)

    Reino, Luís; Figueira, Rui; Beja, Pedro; Araújo, Miguel B; Capinha, César; Strubbe, Diederik

    2017-11-01

    Wildlife trade is a major pathway for introduction of invasive species worldwide. However, how exactly wildlife trade influences invasion risk, beyond the transportation of individuals to novel areas, remains unknown. We analyze the global trade network of wild-caught birds from 1995 to 2011 as reported by CITES (Convention on International Trade in Endangered Species of Wild Fauna and Flora). We found that before the European Union ban on imports of wild-caught birds, declared in 2005, invasion risk was closely associated with numbers of imported birds, diversity of import sources, and degree of network centrality of importer countries. After the ban, fluxes of global bird trade declined sharply. However, new trade routes emerged, primarily toward the Nearctic, Afrotropical, and Indo-Malay regions. Although regional bans can curtail invasion risk globally, to be fully effective and prevent rerouting of trade flows, bans should be global.

  4. Introduction to International Trade.

    Science.gov (United States)

    Intercom, 1986

    1986-01-01

    Focusing mainly on United States-Japan relations, this issue provides 11 lesson plans and student handouts dealing with international trade topics such as protective tariffs, currency exchange rates, unofficial trade barriers, causes of unemployment, the balance of payments and the internationalization of the automobile industry. (JDH)

  5. Trade and Development

    DEFF Research Database (Denmark)

    Abbott, Philip; Bentzen, Jeanet; Tarp, Finn

    2009-01-01

    History, not predictions of CGE models or cross-country growth studies, shows a strong relationship between trade and development. Vietnam's experience with bilateral trade agreements, comparing actual outcomes with predictions from existing models, demonstrates this and the limitations of research...

  6. Expatriates and trade

    Czech Academy of Sciences Publication Activity Database

    Konečný, Tomáš

    2012-01-01

    Roč. 13, č. 1 (2012), s. 83-98 ISSN 1488-3473 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : migration * trade * informal trade barriers Subject RIV: AH - Economics

  7. Expatriates and trade

    Czech Academy of Sciences Publication Activity Database

    Konečný, Tomáš

    -, č. 387 (2009), s. 1-29 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Grant - others:GA UK(CZ) 118909 Institutional research plan: CEZ:MSM0021620846 Keywords : international trade * migration * informal trade barriers Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp387.pdf

  8. Banking and trading

    NARCIS (Netherlands)

    Boot, A.W.A.; Ratnovski, L.

    2013-01-01

    We study the interaction between relationship banking and short-term, scalable arm’s length finance which we call trading. Relationship banking is not scalable, has high franchise value, is long-term oriented and low risk. Trading is transaction-based: scalable, with lower margins (capital

  9. A trade balance

    DEFF Research Database (Denmark)

    Daugbjerg, Carsten; Kay, Adrian

    2014-01-01

    The establishment of the World Trade Organization (WTO) has been widely accepted as representing the legalisation of world trading rules. However, it is important to reflect on the limits of this legalisation thesis in terms of the interface between international and domestic policy processes. By...

  10. International trade. Multinational aspects.

    Science.gov (United States)

    Ozawa, Y

    2000-01-01

    Of numerous regional economic agreements, the European Union (EU), the North American Free Trade Agreement (NAFTA), South American Common Market (MERCOSUR), the Association of Southeast Asian Nations (ASEAN), the South Asian Association for Regional Cooperation (SAARC) and the Australia-New Zealand Closer Economic Relations Agreement are examples that are actively pursuing regional integration for freer trade of animals and animal products. The World Trade Organization (WTO) believes that regional and multinational integration initiatives are complements rather than alternatives in the pursuit of more open trade. In the efforts to harmonize SPS standards among multilateral trading nations, it is recommended that national requirements meet the standards developed by the OIE and the FAO/WHO Codex Alimentarius Commission as the minimum requirements rather than adopting the standards of the lowest common denominator. Regional grouping may hinder multilateral or bilateral trade between the countries of a group and those of the other groups. How to eliminate such non-tariff barriers as traditional trade custom remains to be examined. Ongoing activities of VICH (Harmonisation of Technical Requirements for Registration of Veterinary Medical Products) may pave the way for more open trade in pharmaceutical products between multilateral regional groups.

  11. Comparative study on current trading system and online trading: the ...

    African Journals Online (AJOL)

    Comparative study on current trading system and online trading: the case of ... of online trading and factors affecting its feasibility of implementation in ECX. ... The study found that there is significant capacity problem with major skills gap with ...

  12. Environmentally damaging electricity trade

    International Nuclear Information System (INIS)

    Billette de Villemeur, Etienne; Pineau, Pierre-Olivier

    2010-01-01

    Electricity trade across regions is often considered welfare enhancing. We show in this paper that this should be reconsidered if environmental externalities are taken into account. We consider two cases where trade is beneficial, before accounting for environmental damages: first, when two regions with the same technology display some demand heterogeneity; second when one region endowed with hydropower arbitrages with its 'thermal' neighbor. Our results show that under reasonable demand and supply elasticities, trade comes with an additional environmental cost. This calls for integrating environmental externalities into market reforms when redesigning the electricity sector. Two North American applications illustrate our results: trade between Pennsylvania and New York, and trade between hydro-rich Quebec and New York.

  13. Online stock trading platform

    Directory of Open Access Journals (Sweden)

    Ion LUNGU

    2006-01-01

    Full Text Available The Internet is the perfect tool that can assure the market’s transparency for any user who wants to trade on the stock market. The investor can have access to the market news, financial calendar or the press releases of the issuers. A good online trading platform also provides real-time intraday quotes, trading history and technical analysis giving the investor a clearer view of the supply and demand in the market. All this information provides the investor a good image of the market and encourages him to trade. This paper wishes to draft the pieces of an online trading platform and to analyze the impact of developing and implementing one in a brokerage firm.

  14. Environmentally damaging electricity trade

    Energy Technology Data Exchange (ETDEWEB)

    Billette de Villemeur, Etienne [Toulouse School of Economics (IDEI and GREMAQ) (France); Pineau, Pierre-Olivier [HEC Montreal (Canada)

    2010-03-15

    Electricity trade across regions is often considered welfare enhancing. We show in this paper that this should be reconsidered if environmental externalities are taken into account. We consider two cases where trade is beneficial, before accounting for environmental damages: first, when two regions with the same technology display some demand heterogeneity; second when one region endowed with hydropower arbitrages with its ''thermal'' neighbor. Our results show that under reasonable demand and supply elasticities, trade comes with an additional environmental cost. This calls for integrating environmental externalities into market reforms when redesigning the electricity sector. Two North American applications illustrate our results: trade between Pennsylvania and New York, and trade between hydro-rich Quebec and New York. (author)

  15. E-commerce trade in invasive plants.

    Science.gov (United States)

    Humair, Franziska; Humair, Luc; Kuhn, Fabian; Kueffer, Christoph

    2015-12-01

    Biological invasions are a major concern in conservation, especially because global transport of species is still increasing rapidly. Conservationists hope to anticipate and thus prevent future invasions by identifying and regulating potentially invasive species through species risk assessments and international trade regulations. Among many introduction pathways of non-native species, horticulture is a particularly important driver of plant invasions. In recent decades, the horticultural industry expanded globally and changed structurally through the emergence of new distribution channels, including internet trade (e-commerce). Using an automated search algorithm, we surveyed, on a daily basis, e-commerce trade on 10 major online auction sites (including eBay) of approximately three-fifths of the world's spermatophyte flora. Many recognized invasive plant species (>500 species) (i.e., species associated with ecological or socio-economic problems) were traded daily worldwide on the internet. A markedly higher proportion of invasive than non-invasive species were available online. Typically, for a particular plant family, 30-80% of recognized invasive species were detected on an auction site, but only a few percentages of all species in the plant family were detected on a site. Families that were more traded had a higher proportion of invasive species than families that were less traded. For woody species, there was a significant positive relationship between the number of regions where a species was sold and the number of regions where it was invasive. Our results indicate that biosecurity is not effectively regulating online plant trade. In the future, automated monitoring of e-commerce may help prevent the spread of invasive species, provide information on emerging trade connectivity across national borders, and be used in horizon scanning exercises for early detection of new species and their geographic source areas in international trade. © 2015 Society for

  16. Temporal dynamics of blue and green virtual water trade networks

    Science.gov (United States)

    Konar, M.; Dalin, C.; Hanasaki, N.; Rinaldo, A.; Rodriguez-Iturbe, I.

    2012-12-01

    Global food security increasingly relies on the trade of food commodities. Freshwater resources are essential to agricultural production and are thus embodied in the trade of food commodities, referred to as "virtual water trade." Agricultural production predominantly relies on rainwater (i.e., "green water"), though irrigation (i.e., "blue water") does play an important role. These different sources of water have distinctly different opportunity costs, which may be reflected in the way these resources are traded. Thus, the temporal dynamics of the virtual water trade networks from these distinct water sources require characterization. We find that 42 × 109 m3 blue and 310 × 109 m3 green water was traded in 1986, growing to 78 × 109 m3 blue and 594 × 109 m3 green water traded in 2008. Three nations dominate the export of green water resources: the USA, Argentina, and Brazil. As a country increases its export trade partners it tends to export relatively more blue water. However, as a country increases its import trade partners it does not preferentially import water from a specific source. The amount of virtual water that a country imports by increasing its import trade partners has been decreasing over time, with the exception of the soy trade. Both blue and green virtual water networks are efficient: 119 × 109 m3 blue and 105 × 109 m3 green water were saved in 2008. Importantly, trade has been increasingly saving water over time, due to the intensification of crop trade on more water-efficient links.

  17. Welfare gains by reducing transaction costs: Linking trade and innovation policy

    NARCIS (Netherlands)

    Butter, den Frank A.G.; Baeten, Joost

    2006-01-01

    Specialisation and trade are major sources of productivity increases, and therefore of welfare gains. With reference to the Netherlands this paper discusses how (international) fragmentation of production and outsourcing may enhance productivity. In order to promote further specialisation and trade,

  18. In-pile data analysis of the comparative WWER/PWR test IFA-503.1. Final report.

    Energy Technology Data Exchange (ETDEWEB)

    Volkov, B.; Devold, H.; Ryazantzev, E.; Yakovlev, V.

    1999-04-15

    The comparative WWER/PWR test in IFA-503.1 was commenced in July 1995 and successfully finished at the end of November 1998. The main objective of the test was generation of representative and comparative data of standard WWER-440 fuel fabricated at the 'MSZ' Electrostal (Russia) and PWR type fuel manufactured at IFE Kjeller (Norway). The test assembly comprised two clusters, each with 3 WWER rods and 3 PWR type rods. Eight rods with two types of fuel were instrumented with expansion thermometers, four rods were equipped with both fuel stack elongation detectors and pressure transducers. All sensors worked satisfactorily during the test. The average burnups achieved in the lower and upper clusters were around 25 and 20 MWd/kgUO{sub 2}, respectively. Some difference in densification of the two types of fuel was revealed during the first irradiation period. However, the fuel temperatures and commencement of fuel stack swelling were similar despite this fact. At the end of the test the rig was moved to a higher flux position in the HBWR core with the aim of promoting FGR and to compare the behaviour of the two types of fuel under higher power. Pressure measurements indicated a comparable low FGR (around 1 percent) in both types of rods. The centreline temperatures measured in the PWR rods were very close to the Halden FGR threshold whilst the WWER fuel temperatures were slightly lower. Despite the differences found in the behaviour of the two types of fuel during the test, the analysis of the in-pile data showed that these differences would not affect the fuel efficiency, at least, up to the burnup achieved in the test. It is supposed that these differences can be related to the fuel microstructure, in particular to the fuel grain and pore sizes (author) (ml)

  19. In-pile data analysis of the comparative WWER/PWR test IFA-503.1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Volkov, B.; Devold, H.; Ryazantzev, E.; Yakovlev, V

    1999-04-15

    The comparative WWER/PWR test in IFA-503.1 was commenced in July 1995 and successfully finished at the end of November 1998. The main objective of the test was generation of representative and comparative data of standard WWER-440 fuel fabricated at the 'MSZ' Electrostal (Russia) and PWR type fuel manufactured at IFE Kjeller (Norway). The test assembly comprised two clusters, each with 3 WWER rods and 3 PWR type rods. Eight rods with two types of fuel were instrumented with expansion thermometers, four rods were equipped with both fuel stack elongation detectors and pressure transducers. All sensors worked satisfactorily during the test. The average burnups achieved in the lower and upper clusters were around 25 and 20 MWd/kgUO{sub 2}, respectively. Some difference in densification of the two types of fuel was revealed during the first irradiation period. However, the fuel temperatures and commencement of fuel stack swelling were similar despite this fact. At the end of the test the rig was moved to a higher flux position in the HBWR core with the aim of promoting FGR and to compare the behaviour of the two types of fuel under higher power. Pressure measurements indicated a comparable low FGR (around 1 percent) in both types of rods. The centreline temperatures measured in the PWR rods were very close to the Halden FGR threshold whilst the WWER fuel temperatures were slightly lower. Despite the differences found in the behaviour of the two types of fuel during the test, the analysis of the in-pile data showed that these differences would not affect the fuel efficiency, at least, up to the burnup achieved in the test. It is supposed that these differences can be related to the fuel microstructure, in particular to the fuel grain and pore sizes (author) (ml)

  20. Trade unions and energy policy

    International Nuclear Information System (INIS)

    Evans, M.

    1984-01-01

    The subject is discussed under the headings: introduction (the review of energy policy by the Trades Union Congress); energy objectives and the energy crisis; energy planning (a planning framework for supply and demand; energy demand management; public planning inquiries; a plan for Britain; beyond Britain); a low energy growth strategy (UK primary energy demand); choice of supplies (coal; oil and gas; nuclear energy); new sources of energy (e.g.solar, geothermal, biofuels, wave, wind, tidal); conservation; health and safety - employers in the energy industries; conclusions. (U.K.)

  1. An Asymmetrical Trade: Trade in the Exotic and Our Understanding of Axes and Early Neolithic Exchange

    OpenAIRE

    Tom Clare

    2009-01-01

    This article explores the idea that the movement of axes away from their source of procurement, such as those of Group VI, reflects in part an invisible trade in perishable goods. In particular, it hypothesises that the pattern of movement was stimulated in the early Neolithic by the dispersal of those exotic goods required to establish farming. The evidence for and the implications of this are explored, and it is suggested that in order to facilitate understanding of both the 'trade' in ston...

  2. Canada - United States Natural Gas Trade - A Model for Expanding Regional Energy Trade

    International Nuclear Information System (INIS)

    D ArcyMcGee, T.

    1996-01-01

    This document deals with the expansion of Canadian natural gas exports to the United States. Over the past decade, these exports have more than tripled. The expansion of energy trade requires a growing market, a competitive supply source, deregulation of markets and free trade agreements, capital investment and eventually a transparent market with many buyers and sellers. Even if all these factors coexisted, there have been problems linked to this expansion of exports, such as the construction of transportation capacity. (TEC)

  3. Statistics of foreign trade in radioactive materials

    International Nuclear Information System (INIS)

    Anon.

    2001-01-01

    The German Federal Office for Industry and Foreign Trade Control (BAFA) keeps annual statistics of the imports and exports of radioactive materials, nuclear fuels included. The entries, some of them with precise details, cover the participating countries and the radionuclides concerned as well as all kinds of radioactive materials. The tables listed in the article represent the overall balance of the development of imports and exports of radioactive materials for the years 1983 to 2000 arranged by activity levels, including the development of nuclear fuel imports and exports. For the year 2000, an additional trade balance for irradiated and unirradiated nuclear fuels and source materials differentiated by enrichment is presented for the countries involved. In 2000, some 2446 t of nuclear fuels and source materials were imported into the Federal Republic, while approx. 2720 t were exported. The chief trading partners are countries of the European Union and Russia, South Korea, and Brazil. (orig.) [de

  4. Trade and Sectoral Productivity

    OpenAIRE

    Fadinger, Harald; Fleiss, Pablo

    2008-01-01

    Even though differences in sectoral total factor productivity are at the heart of Ricardian trade theory and many models of growth and development, very little is known about their size and their form. In this paper we try to fill this gap by using a Hybrid-Ricardo-Heckscher-Ohlin trade model and bilateral sectoral trade data to overcome the data problem that has limited previous studies, which have used input and output data to back out productivities, to a small number of OECD economies. We...

  5. Carbon Trading. Literature Overview

    International Nuclear Information System (INIS)

    Kerste, M.; Weda, J.; Rosenboom, N.

    2010-12-01

    From Pigou and Coase to the Kyoto Protocol, carbon trading has resulted in pricing of the negative externalities emanating from pollution. This report highlights leading literature and empirical findings on carbon trading, amongst others addressing the relevant carbon and related markets, the (lack of) success of carbon trading so far and room for improvement as well as its impact on investments in emission reduction. This report is part of a set of SEO-reports on finance and sustainability. The other reports deal with: Financing the Transition to Sustainable Energy; Innovations in financing environmental and social sustainability; and Sustainable investment.

  6. An approach to evaluating the economic impact of emissions trading

    International Nuclear Information System (INIS)

    Lieu, S.; Johnson, S.L.; Dabirian, S.

    1993-01-01

    The command-and-control system to air quality controls is a mixture of technology-forcing standards for existing sources and offset for new sources. More stringent controls are required to achieve the ambient air quality standards in non-attainment urban areas which have been conformed with burgeoning economic growth. Due to the economy of scale and locale of polluting sources, some sources can implement these controls in a more cost-effective manner than others. In order to minimize the control costs of regulated sources, trading of emissions has been stipulated and has occurred among power plants to curb acid rain at the national level. Southern California is currently embarking on the trading of oxides of nitrogen, reactive organic compounds, and oxides of sulfur among existing and new stationary sources. New economic opportunities for entrepreneurs with advances control technology will arise under emissions trading. Trading will also result in the redistribution of emissions geographically and across industries. Through the linkage of a linear-programming trading model, a regional econometric model, and an urban airshed model, the impact of trading on the Southern California economy can thus be examined. This paper describes a framework which can be used to compare and contrast RECLAIM with the command-and-control system; and discusses a few issues which may arise in a trading market and how these issues can be dealt with are also examined

  7. NOx emissions trading: Precursor to future growth

    International Nuclear Information System (INIS)

    Colella, A.

    1993-01-01

    Title I of the Clean Air Act Amendments (CAAA) of 1990 specified the framework for enhanced regulation in ozone non-attainment areas with increasingly stringent requirements dependent on the area classification - marginal, moderate, serious, severe or extreme. Before the CAAA were passed, only volatile organic compounds (VOCs) were regulated as precursors to ozone formation, Now, by statute, emissions of nitrogen oxides (NO x ) are also regulated as ozone precursor. Under the CAAA, new sources and modifications of existing sources are subject to Title I permitting requirements in ozone non-attainment areas if emissions of NO x and/or VOCs exceed certain triggering levels. For many new or facility expansion projects, especially power generation, the NO x thresholds are easily exceeded thus triggering Title I non-attainment new source review which requires application of control technology to new equipment which results in the Lowest Achievable Emission Rate (LAER), and securing emission reductions either internally or from other major sources to offset the increased emission from the new or modified source. The selection of a LAER technology is generally within an applicant's control. An applicant can determine up-front the engineering and cost considerations associated with LAER technology is assessing a project's viability. However, without a clear source of emission offsets of a means to secure them, assessing project viability could be difficult if not impossible. No available emission offsets means no industrial growth. For sources of NO x undergoing Title I new source review, a regional or state banking system that facilitates NO x emissions trading is needed as a precursor to future growth. This paper presents an overview of EPA's Emissions Trading Policy and Title I new source review offset provisions. Industry's concerns about emissions trading and recommendations for future trading programs are presented

  8. Integration, Trade Policy and European Footwear Trade

    OpenAIRE

    Winters, L. Alan

    1992-01-01

    This paper constructs a simulation model of the EC footwear market with which to consider the effects of EC trade policies. It examines the Southern enlargement of the EC, the quotas imposed on Korean and Taiwanese sales - initially in France and Italy and subsequently, in line with the `1992' programme, EC-wide - and the liberalization of imports from Eastern Europe. Import restrictions are shown to be costly - especially those against Eastern Europe.

  9. Effects Of Trade Liberalization Policy On The Performance Of Small ...

    African Journals Online (AJOL)

    The Majority of food processors (i.e. 94 %) were established after the introduction of trade liberalization policy in 1983, and about 67 % sourced raw materials locally and 55 % financed businesses from own savings and profits. The trade liberalization policy had a positive effect on the output growth of SMS food processing ...

  10. Environment, Trade, and Investment

    Science.gov (United States)

    Environment, trade, and investment are fundamentally linked as the environment provides many basic inputs of economic activity – forests, fisheries, metals, minerals – as well as the energy used to process those materials.

  11. International trade and environment

    International Nuclear Information System (INIS)

    Posada L, Luis Guillermo

    2000-01-01

    Topics are presented as economic theory and theory of the international trade, international dimension of the environmental problems, economic prosperity, environmental quality and lineament are given for an alternative, among others

  12. World Trade Center

    Index Scriptorium Estoniae

    2006-01-01

    Esilinastus katastroofifilm "World Trade Center" : stsenarist Andrea Berloff : režissöör Oliver Stone : kunstnik Jan Roelfs : osades Nicholas Cage, Michael Pena, Stephen Dorff jpt : Ameerika Ühendriigid 2006. Ka filmi prototüüpidest

  13. Trading forest carbon - OSU

    Science.gov (United States)

    Issues associate with trading carbon sequestered in forests are discussed. Scientific uncertainties associated with carbon measurement are discussed with respect to proposed accounting procedures. Major issues include: (1) Establishing baselines. (2) Determining additivity from f...

  14. International Trade. International Business

    OpenAIRE

    Мохнюк, А. М.; Mokhniuk, A. M.

    2015-01-01

    Work programme of the study course “International Trade. International Business” was prepared in accordance with educational and vocational training program for bachelors of training direction 6.030601 “Management”.

  15. Oil trading manual

    International Nuclear Information System (INIS)

    Long, D.

    1995-01-01

    This manual provides basic information on all aspects of oil trading. Topics reviewed in Part 1 include physical characteristics and refining and oil pricing arrangements. Part 2 on instruments and markets contains chapters on crude oil markets, product markets, forward and futures contracts, forward paper markets, oil future exchanges, options, swaps and long term oil markets. Part 3 deals with administration and has chapters on operations and logistics, credit control, accounting, taxation of oil trading, contracts and legal and regulatory issues. (UK)

  16. International Trade Students’ Stereotypes

    OpenAIRE

    Kamila Matysová

    2017-01-01

    The goal of the present paper is to detect stereotypes of students studying International Trade at the University of Economics Prague and, if need be, propose didactic measures for intercultural education at the university. In our study, 293 International Trade students described six ethnic and national groups (Roma, Ukrainians, Vietnamese, Russians, Germans and Czechs) in terms of explicit stereotypes. The following hypothesis was formulated in the study: On the one hand, stereotypes of the ...

  17. Trade and climate change

    Energy Technology Data Exchange (ETDEWEB)

    Tamiotti, L.; Teh, R.; Kulacoglu, V. (World Trade Organization (WTO), Geneva (Switzerland)); Olhoff, A.; Simmons, B.; Abaza, H. (United Nations Environment Programme (UNEP) (Denmark))

    2009-06-15

    The Report aims to improve understanding about the linkages between trade and climate change. It shows that trade intersects with climate change in a multitude of ways. For example, governments may introduce a variety of policies, such as regulatory measures and economic incentives, to address climate change. This complex web of measures may have an impact on international trade and the multilateral trading system. The Report begins with a summary of the current state of scientific knowledge on climate change and on the options available for responding to the challenge of climate change. The scientific review is followed by a part on the economic aspects of the link between trade and climate change, and these two parts set the context for the subsequent parts of the Report, which looks at the policies introduced at both the international and national level to address climate change. The part on international policy responses to climate change describes multilateral efforts to reduce greenhouse gas emissions and to adapt to the effects of climate change, and also discusses the role of the current trade and environment negotiations in promoting trade in technologies that aim to mitigate climate change. The final part of the Report gives an overview of a range of national policies and measures that have been used in a number of countries to reduce greenhouse gas emissions and to increase energy efficiency. It presents key features in the design and implementation of these policies, in order to draw a clearer picture of their overall effect and potential impact on environmental protection, sustainable development and trade. It also gives, where appropriate, an overview of the WTO rules that may be relevant to such measures. (author)

  18. Additive versus multiplicative trade costs and the gains from trade

    DEFF Research Database (Denmark)

    Sørensen, Allan

    This paper addresses welfare effects from trade liberalization in a heterogeneous-fi…rms trade model including the empirically important per-unit (i.e. additive) trade costs in addition to the conventional iceberg (i.e. multiplicative) and fi…xed trade costs. The novel contribution of the paper...... is the result that the welfare gain for a given increase in trade openness is higher for reductions in per-unit (additive) trade costs than for reductions in iceberg (multiplicative) trade costs. The ranking derives from differences in intra-industry reallocations and in particular from dissimilar impacts...

  19. Physicians and Insider Trading.

    Science.gov (United States)

    Kesselheim, Aaron S; Sinha, Michael S; Joffe, Steven

    2015-12-01

    Although insider trading is illegal, recent high-profile cases have involved physicians and scientists who are part of corporate governance or who have access to information about clinical trials of investigational products. Insider trading occurs when a person in possession of information that might affect the share price of a company's stock uses that information to buy or sell securities--or supplies that information to others who buy or sell--when the person is expected to keep such information confidential. The input that physicians and scientists provide to business leaders can serve legitimate social functions, but insider trading threatens to undermine any positive outcomes of these relationships. We review insider-trading rules and consider approaches to securities fraud in the health care field. Given the magnitude of the potential financial rewards, the ease of concealing illegal conduct, and the absence of identifiable victims, the temptation for physicians and scientists to engage in insider trading will always be present. Minimizing the occurrence of insider trading will require robust education, strictly enforced contractual provisions, and selective prohibitions against high-risk conduct, such as participation in expert consulting networks and online physician forums, by those individuals with access to valuable inside information.

  20. Part 1: Logging residues in piles - Needle loss and fuel quality. Part 2: Nitrogen leaching under piles of logging residues

    International Nuclear Information System (INIS)

    Lehtikangas, P.; Lundkvist, H.

    1991-01-01

    Part 1: Experimental piles were built in three geographical locations during May-Sept. 1989. Logging residues consisted of 95% spruce and 5% pine. Height of the piles varied between 80 and 230 cm. Needles were collected by placing drawers under 40 randomely chosen piles. The drawers were emptied every two weeks during the storage period. Natural needle loss was between 18 and 32% of the total amount of needles after the first two months of storage. At the end of the storage period, 24-42% of the needles had fallen down to the drawers. At the end of the experiment the total needle fall was 95-100% in the shaken piles. According to the results of this study piles smaller than 150 cm had the most effective needle fall. Piles should be placed on open places where the air and sun heat penetrate and dry them. Needles were the most sensitive fraction to variations in precipitation compared to the other components, such as branches. Piles usually dried quickly, but they also rewet easily. This was especially true in the smaller piles. The lowest moisture content was measured at the end of June. The ash content in needles varied between 4 and 8%. 16 refs., 15 figs. Part 2: Three field experiments were equipped with no-tension humus lysimeters. Pairs of lysimeters with the same humus/field layer vegetation material were placed in pairs, one under a pile of felling residues and another in the open clear felling. Leaching of nitrogen as well as pH and electric conductivity in the leachate was followed through sampling of the leachate at regular intervals. The results from the investigation show that: * the amount of leachate was higher in lysimeters in the open clear felling, * pH in the leachate was initially lower under piles of felling residues, * the amount of nitrogen leached was higher in the open clear felling. Thus, storing of felling residues in piles during the summer season did not cause any increase in nitrogen leaching, which had been considered to be a risk

  1. Development of gas cooled reactors and experimental setup of high temperature helium loop for in-pile operation

    Energy Technology Data Exchange (ETDEWEB)

    Miletić, Marija, E-mail: marija_miletic@live.com [Czech Technical University in Prague, Prague (Czech Republic); Fukač, Rostislav, E-mail: fuk@cvrez.cz [Research Centre Rez Ltd., Rez (Czech Republic); Pioro, Igor, E-mail: Igor.Pioro@uoit.ca [University of Ontario Institute of Technology, Oshawa (Canada); Dragunov, Alexey, E-mail: Alexey.Dragunov@uoit.ca [University of Ontario Institute of Technology, Oshawa (Canada)

    2014-09-15

    Highlights: • Gas as a coolant in Gen-IV reactors, history and development. • Main physical parameters comparison of gas coolants: carbon dioxide, helium, hydrogen with water. • Forced convection in turbulent pipe flow. • Gas cooled fast reactor concept comparisons to very high temperature reactor concept. • High temperature helium loop: concept, development, mechanism, design and constraints. - Abstract: Rapidly increasing energy and electricity demands, global concerns over the climate changes and strong dependence on foreign fossil fuel supplies are powerfully influencing greater use of nuclear power. In order to establish the viability of next-generation reactor concepts to meet tomorrow's needs for clean and reliable energy production the fundamental research and development issues need to be addressed for the Generation-IV nuclear-energy systems. Generation-IV reactor concepts are being developed to use more advanced materials, coolants and higher burn-ups fuels, while keeping a nuclear reactor safe and reliable. One of the six Generation-IV concepts is a very high temperature reactor (VHTR). The VHTR concept uses a graphite-moderated core with a once-through uranium fuel cycle, using high temperature helium as the coolant. Because helium is naturally inert and single-phase, the helium-cooled reactor can operate at much higher temperatures, leading to higher efficiency. Current VHTR concepts will use fuels such as uranium dioxide, uranium carbide, or uranium oxycarbide. Since some of these fuels are new in nuclear industry and due to their unknown properties and behavior within VHTR conditions it is very important to address these issues by investigate their characteristics within conditions close to those in VHTRs. This research can be performed in a research reactor with in-pile helium loop designed and constructed in Research Center Rez Ltd. One of the topics analyzed in this article are also physical characteristic and benefits of gas

  2. Global timber trade pattern: the cards have changed

    OpenAIRE

    Roda Jean-Marc; Rohana Abd Rahman; Ismariah Ahmad; Lim Hin Fui; Mohd Parid Mamat

    2011-01-01

    Since the 1960s, the global timber trade has gradually evolved from a South-North trade to a South-South trade, with an acceleration of the phenomenon in the mid 1990s. Nowadays, Asia consumes more than 70% (in round wood equivalent) of the forest products originating from the tropics. Africa becomes the new frontier for the supplies of wood material for Asian giants, which now source raw wood from all over the world. Since the mid 1990s, the dynamics of the tropical timber trade have been in...

  3. Measuring Gravity in International Trade Flows

    Directory of Open Access Journals (Sweden)

    E. Young Song

    2004-12-01

    Full Text Available The purpose of this paper is two-fold. One is to clarify the concept of gravity in international trade flows. The other is to measure the strength of gravity in international trade flows in a way that is consistent with a well-defined concept of gravity. This paper shows that the widely accepted belief that specialization is the source of gravity is not well grounded on theory. We propose to define gravity in international trade as the force that makes the market shares of an exporting country constant in all importing countries, regardless of their sizes. In a stochastic context, we should interpret it as implying that the strength of gravity increases i as the correlation between market shares and market sizes gets weaker and ii as the variance of market shares gets smaller. We estimate an empirical gravity equation thoroughly based on this definition of gravity. We find that a strong degree of gravity exists in most bilateral trade, regardless of income levels of countries, and in trade of most manThe purpose of this paper is two-fold. One is to clarify the concept of gravity in international trade flows. The other is to measure the strength of gravity in international trade flows in a way that is consistent with a well-defined concept of gravity. This paper shows that the widely accepted belief that specialization is the source of gravity is not well grounded on theory. We propose to define gravity in international trade as the force that makes the market shares of an exporting country constant in all importing countries, regardless of their sizes. In a stochastic context, we should interpret it as implying that the strength of gravity increases i as the correlation between market shares and market sizes gets weaker and ii as the variance of market shares gets smaller. We estimate an empirical gravity equation thoroughly based on this definition of gravity. We find that a strong degree of gravity exists in most bilateral trade, regardless of

  4. In-Pile Experiment of a New Hafnium Aluminide Composite Material to Enable Fast Neutron Testing in the Advanced Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Donna Post Guillen; Douglas L. Porter; James R. Parry; Heng Ban

    2010-06-01

    A new hafnium aluminide composite material is being developed as a key component in a Boosted Fast Flux Loop (BFFL) system designed to provide fast neutron flux test capability in the Advanced Test Reactor. An absorber block comprised of hafnium aluminide (Al3Hf) particles (~23% by volume) dispersed in an aluminum matrix can absorb thermal neutrons and transfer heat from the experiment to pressurized water cooling channels. However, the thermophysical properties, such as thermal conductivity, of this material and the effect of irradiation are not known. This paper describes the design of an in-pile experiment to obtain such data to enable design and optimization of the BFFL neutron filter.

  5. Energy from biomass. Summaries of the Biomass Projects carried out as part of the Department of Trade and Industry's New and Renewable Energy Programme. Vol. 5: straw, poultry litter and energy crops as energy sources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    These volumes of summaries provide easy access to the many projects carried out in the Energy from Biomass programme area as part of the Department of Trade and Industry's New and Renewable Energy Programme. The summaries in this volume cover contractor reports on the subject published up to December 1997. (author)

  6. An Asymmetrical Trade: Trade in the Exotic and Our Understanding of Axes and Early Neolithic Exchange

    Directory of Open Access Journals (Sweden)

    Tom Clare

    2009-09-01

    Full Text Available This article explores the idea that the movement of axes away from their source of procurement, such as those of Group VI, reflects in part an invisible trade in perishable goods. In particular, it hypothesises that the pattern of movement was stimulated in the early Neolithic by the dispersal of those exotic goods required to establish farming. The evidence for and the implications of this are explored, and it is suggested that in order to facilitate understanding of both the 'trade' in stone axes and the Neolithic in general, what is needed is a systematic programme of petrological sourcing of pottery and other artefacts.

  7. Why are Trade Agreements Regional?

    OpenAIRE

    Zissimos, Ben

    2007-01-01

    This paper shows how distance may be used to coordinate on a unique equilibrium in which trade agreements are regional. Trade agreement formation is modeled as coalition formation. In a standard trade model with no distance between countries, a familiar problem of coordination failure arises giving rise to multiple equilibria; any one of many possible trade agreements can form. With distance between countries, and through strategic interaction in tariff setting, regional trade agreements gene...

  8. Advanced instrumentation and analysis methods for in-pile thermal and nuclear measurements: from out-of-pile studies to irradiation campaigns

    International Nuclear Information System (INIS)

    Reynard-Carette, C.; Lyoussi, A.

    2015-01-01

    Research and development on nuclear fuel behavior under irradiations and accelerated ageing of structure materials is a key issue for sustainable nuclear energy in order to meet specific needs by keeping the best level of safety. A new Material Testing Reactor (MTR), the Jules Horowitz Reactor (JHR) currently under construction in the South of France in the CEA Cadarache research centre will offer a real opportunity to perform R and D programs and hence will crucially contribute to the selection, optimization and qualification of innovative materials and fuels. To perform such programs advanced accurate and innovative experiments, irradiation devices that contain material and fuel samples are required to be set up inside or beside the reactor core. These experiments needs beforehand in situ and on line sophisticated measurements to accurately reach specific and determining parameters such as thermal and fast neutron fluxes, nuclear heating and temperature conditions to precisely monitor and control the conducted assays. Consequently, since 2009 CEA and Aix-Marseille University collaborate in order to design and develop a new multi-sensor device which will be dedicated to measuring profiles of such conditions inside the experimental channels of the JHR. These works are performed in the framework of two complementary joint research programs called MAHRI-BETHY and INCORE. These programs couple experimental studies carried out both out-of nuclear fluxes (in laboratory) and under irradiation conditions (in OSIRIS MTR reactor in France and MARIA MTR reactor in Poland) with numerical works realized by thermal simulations (CAST3M code) and Monte Carlo simulations (MCNP code). These programs deal with three main aims. The first one corresponds to the design and/or the test of new in-pile instrumentation. The second one concerns the development of advanced calibration procedures in particular in the case of one specific sensor: a differential calorimeter used to quantify

  9. Advanced instrumentation and analysis methods for in-pile thermal and nuclear measurements: from out-of-pile studies to irradiation campaigns

    Energy Technology Data Exchange (ETDEWEB)

    Reynard-Carette, C. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France); Lyoussi, A. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 (France)

    2015-07-01

    Research and development on nuclear fuel behavior under irradiations and accelerated ageing of structure materials is a key issue for sustainable nuclear energy in order to meet specific needs by keeping the best level of safety. A new Material Testing Reactor (MTR), the Jules Horowitz Reactor (JHR) currently under construction in the South of France in the CEA Cadarache research centre will offer a real opportunity to perform R and D programs and hence will crucially contribute to the selection, optimization and qualification of innovative materials and fuels. To perform such programs advanced accurate and innovative experiments, irradiation devices that contain material and fuel samples are required to be set up inside or beside the reactor core. These experiments needs beforehand in situ and on line sophisticated measurements to accurately reach specific and determining parameters such as thermal and fast neutron fluxes, nuclear heating and temperature conditions to precisely monitor and control the conducted assays. Consequently, since 2009 CEA and Aix-Marseille University collaborate in order to design and develop a new multi-sensor device which will be dedicated to measuring profiles of such conditions inside the experimental channels of the JHR. These works are performed in the framework of two complementary joint research programs called MAHRI-BETHY and INCORE. These programs couple experimental studies carried out both out-of nuclear fluxes (in laboratory) and under irradiation conditions (in OSIRIS MTR reactor in France and MARIA MTR reactor in Poland) with numerical works realized by thermal simulations (CAST3M code) and Monte Carlo simulations (MCNP code). These programs deal with three main aims. The first one corresponds to the design and/or the test of new in-pile instrumentation. The second one concerns the development of advanced calibration procedures in particular in the case of one specific sensor: a differential calorimeter used to quantify

  10. Trade creation and trade diversion in the Canada - United States Free Trade Agreement

    OpenAIRE

    Kimberly A. Clausing

    2001-01-01

    In this paper the changes in trade patterns introduced by the Canada-United States Free Trade Agreement are examined. Variation in the extent of tariff liberalization under the agreement is used to identify the impact of tariff liberalization on the growth of trade both with member countries and non-member countries. Data at the commodity level are used, and the results indicate that the Canada-United States Free Trade Agreement had substantial trade creation effects, with little evidence of ...

  11. Trading green electricity

    International Nuclear Information System (INIS)

    Davies, M.

    1997-01-01

    A study has been carried out into the feasibility of developing an electricity trading mechanism which would allow consumers to purchase electricity which has been derived from renewable energy resources. This study was part funded by the European Commission (ALTENER), the Department of Trade and Industry and a number of private sector companies. The trading mechanism is known as the Green Pool. As a result of the findings of this study discussions are being held with potential generators and suppliers to establish a Green Pool plc. The aim is to encourage the development of new renewable energy projects outside the NFFO and SRO schemes. The Green Pool plc will be owned by the generators and its main objective will be to market the electricity produced by its members. (Author)

  12. African agricultural trade

    DEFF Research Database (Denmark)

    Jensen, Hans Grinsted; Sandrey, Ron

    2015-01-01

    This article starts with a profile of African agricultural trade. Using the pre-release version 9.2 of the GTAP database, we then show that the results for tariff elimination on intra-African trade are promising, but these tariff barriers are not as significant as the various trade-related barriers...... outside of tariffs. Impressive results were forecast by simulating both a 50% reduction in what can be considered traditional non-tariff barriers and a modest 20% reduction in the costs associated with transit time delays at customs, terminals and internal land transportation. Gains from tariff...... elimination, non-tariff barrier reductions and time in transit cost reductions are likely to be cumulative and would generate very large gains to Africa. The policy implications are clear: while cooperation will enhance the gains, much of the benefits will result from unilateral actions and regional...

  13. Development of remote welding techniques for in-pile IASCC capsules and evaluation of material integrity on capsules for long irradiation period

    Science.gov (United States)

    Shibata, A.; Nakano, J.; Ohmi, M.; Kawamata, K.; Nakagawa, T.; Tsukada, T.

    2012-03-01

    To simulate irradiation assisted stress corrosion cracking (IASCC) behavior by in-pile experiments, it is necessary to irradiate specimens up to a neutron fluence that is higher than the IASCC threshold fluence. Pre-irradiated specimens must be relocated from pre-irradiation capsules to in-pile capsules. Hence, a remote welding machine has been developed. And the integrity of capsule housing for a long term irradiation was evaluated by tensile tests in air and slow strain rate tests in water. Two type specimens were prepared. Specimens were obtained from the outer tubes of capsule irradiated to 1.0-3.9 × 1026 n/m2 (E > 1 MeV). And specimens were irradiated in a leaky capsule to 0.03-1.0 × 1026 n/m2. Elongation more than 15% in tensile test at 423 K was confirmed and no IGSCC fraction was shown in SSRT at 423 K which was estimated as temperature at the outer tubes of the capsule under irradiation.

  14. Development of remote welding techniques for in-pile IASCC capsules and evaluation of material integrity on capsules for long irradiation period

    International Nuclear Information System (INIS)

    Shibata, A.; Nakano, J.; Ohmi, M.; Kawamata, K.; Nakagawa, T.; Tsukada, T.

    2012-01-01

    To simulate irradiation assisted stress corrosion cracking (IASCC) behavior by in-pile experiments, it is necessary to irradiate specimens up to a neutron fluence that is higher than the IASCC threshold fluence. Pre-irradiated specimens must be relocated from pre-irradiation capsules to in-pile capsules. Hence, a remote welding machine has been developed. And the integrity of capsule housing for a long term irradiation was evaluated by tensile tests in air and slow strain rate tests in water. Two type specimens were prepared. Specimens were obtained from the outer tubes of capsule irradiated to 1.0–3.9 × 10 26 n/m 2 (E > 1 MeV). And specimens were irradiated in a leaky capsule to 0.03–1.0 × 10 26 n/m 2 . Elongation more than 15% in tensile test at 423 K was confirmed and no IGSCC fraction was shown in SSRT at 423 K which was estimated as temperature at the outer tubes of the capsule under irradiation.

  15. NOx trade. Case studies

    International Nuclear Information System (INIS)

    Jantzen, J.

    2002-01-01

    Some of the questions with respect to the trade of nitrogen oxides that businesses in the Netherlands have to deal with are dealt with: should a business buy or sell rights for NOx emission; which measures must be taken to reduce NOx emission; how much must be invested; and how to deal with uncertainties with regard to prices. Simulations were carried out with the MOSES model to find the answers to those questions. Results of some case studies are presented, focusing on the chemical sector in the Netherlands. Finally, the financial (dis)advantages of NOx trade and the related uncertainties for a single enterprise are discussed [nl

  16. Energy content of world trade

    International Nuclear Information System (INIS)

    Wagner, Gernot

    2010-01-01

    This paper constructs a comprehensive dataset of oil and total energy embedded in world trade of manufacturing goods for 73 countries from 1978 to 2000. Applying the data to debates on the dependency on foreign energy sources makes clear that achieving complete energy independence in the foreseeable future is unlikely to be feasible and may not be desirable. Applying it to the discussion of environmental Kuznets curves (EKCs) highlights an important distinction between production and consumption of energy. Richer countries use relatively less energy in their industrial production yet still consume relatively large amounts of energy indirectly. A further investigation largely excludes structural shifts of production in and out of the manufacturing sector as an explanation for the downward-sloping portion of the EKC. Country-level analyses add caveats but show tentative support for the cross-country conclusions. - Research highlights: →Energy dependency goes beyond direct imports; energy is also embedded in trade. →Production-based energy use follows an inverse U-shape, consumption-based energy use does not. →Richer countries import energy-intensive products and, thus, export pollution.

  17. THE ROLE OF QUALITY: SPANISH WOOL IN PORTUGUESE TRADE IN THE EARLY NINETEENTH CENTURY

    Directory of Open Access Journals (Sweden)

    Maria Cristina Moreira

    2007-01-01

    Full Text Available Cross-referencing qualitative and quantitative statistics from handwritten Portuguese trade sources shows the Spanish in the first half of the 19th century using Portuguese trade to introduce their wool in English and other markets. High quality Spanish merino wool played a key role in Portuguese trade during this period, particularly in the golden years of 1809-1819 and 1825. Its quality intensified both legal trade and smuggling.

  18. The Supply of Trade Credit by Brazilian Publicly Traded Firms

    Directory of Open Access Journals (Sweden)

    Rafael Felipe Schiozer

    2011-12-01

    Full Text Available This paper investigates the determinants of trade credit supply by Brazilian publicly traded companies between the years of 2005 and 2008. International literature (both theoretical and empirical documents that the main determinants of trade credit supply are the size of the firm and the size of its debt. Both indicate that the availability of resources to the firm is an important factor for the supply of trade credit. In addition, the literature confirms strategic uses of trade credit such as those for price discrimination purposes. The results obtained using a sample of 157 Brazilian companies do not support that size and indebtedness are relevant determinants for trade credit supply, but they confirm the supply of trade credit as a strategic tool for the firms. Additionally we observed a significant decrease in trade credit supply in 2008, the year in which a severe international financial crisis took place.

  19. Starbucks’s Fair Trade in The Edge of Globalization

    Directory of Open Access Journals (Sweden)

    Saomi Rizqiyanto

    2017-07-01

    Full Text Available Starbucks as a global company that reflect American values plays an important role in the trade of coffee industry. In February 2000, Starbucks partially adopted the Fair Trade and in early 2001 Starbucks fully adopt Fair Trade. This research seeks to examine the relationship between Starbucks as a symbol of globalization with Starbucks as a global corporation who adopt Fair Trade. This study also seeks to explain how any practical Starbucks Fair Trade as a whole and uncover the reasons behind Starbucks adopt Fair Trade. The research uses a case study method and using a primary and secondary reference sources in the form of books and journals. As a results, this study indicate that Starbucks has strong reasons that ultimately makes the company adopted the Fair Trade. The adoption of Fair Trade also known as CAFE Practices is apparently not spared from criticism of the observer of Fair Trade.DOI: 10.15408/etk.v16i2.5546

  20. What drives the formation of global oil trade patterns?

    International Nuclear Information System (INIS)

    Zhang, Hai-Ying; Ji, Qiang; Fan, Ying

    2015-01-01

    In this paper, the spatial characteristics of current global oil trade patterns are investigated by proposing a new indicator Moran-F. Meanwhile, the factors that influence the formation of oil trade patterns are identified by constructing four different kinds of spatial econometric models. The findings indicate that most oil exporters have an obvious export focus in North America and a relatively balanced export in Europe and the Asia-Pacific region. Besides supply and demand factors, technological progress and energy efficiency have also significantly influenced the oil trade. Moreover, there is a spillover effect of trade flow among different regions, but its impact is weak. In addition, oil importers in the same region have the potential to cooperate due to their similar import sources. Finally, promotion of oil importers' R&D investments can effectively reduce the demand for global oil trade. - Highlights: • A new spatial association Moran-F indicator that applies to trade flows is proposed. • Driving factors affecting the formation of oil trade patterns are identified. • Oil-exporting countries implement various export strategies in different regions. • Supply, demand and technological factors contribute to the oil trade patterns. • Spillover effect of each factor affecting oil trade flows does exist but is limited

  1. Syllabus in Trade Welding.

    Science.gov (United States)

    New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

    The syllabus outlines material for a course two academic years in length (minimum two and one-half hours daily experience) leading to entry-level occupational ability in several welding trade areas. Fourteen units covering are welding, gas welding, oxyacetylene welding, cutting, nonfusion processes, inert gas shielded-arc welding, welding cast…

  2. Scoin Trading (Pty)

    African Journals Online (AJOL)

    User

    2 Scoin Trading (Pty) Ltd v Bernstein 2011 2 SA 118 (SCA). ... Literature on the law of contract in South Africa have over the years tended to hold that fault ..... who was suddenly compelled to be absent on public business was not held to be in.

  3. Trade Remedies: A Primer

    National Research Council Canada - National Science Library

    Jones, Vivian C

    2008-01-01

    ....) authorize the imposition of duties if (1) the International Trade Administration (ITA) of the Department of Commerce determines that foreign merchandise is being, or likely to be sold in the United States at less than fair value, and (2) the U.S...

  4. Trade Remedies: A Primer

    National Research Council Canada - National Science Library

    Jones, Vivian C

    2007-01-01

    ....) authorize the imposition of duties if (1) the International Trade Administration (ITA) of the Department of Commerce determines that foreign merchandise is being, or likely to be sold in the United States at less than fair value, and (2) the U.S...

  5. Trading fund opportunities

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    The paper concerns the operation of the United Kingdom Atomic Energy Authority (UKAEA) as a trading fund. The changes and anticipated effects of this role are discussed, including the financial arrangements, UKAEA skills, customers, Department of Energy sponsorship and new business opportunities. (U.K.)

  6. Trading forest carbon

    Science.gov (United States)

    The nature of carbon in forests is discussed from the perspective of carbon trading. Carbon inventories, specifically in the area of land use and forestry are reviewed for the Pacific Northwest. Carbon turnover in forests is discussed as it relates to carbon sequestration. Scient...

  7. Carbon trading: Literature overview

    NARCIS (Netherlands)

    Kerste, M.; Weda, J.; Rosenboom, N.

    2010-01-01

    From Pigou and Coase to the Kyoto Protocol, carbon trading has resulted in pricing of the negative externalities emanating from pollution. At the request of Duisenberg school of finance, this report highlights leading literature and empirical findings on ‘carbon trading’, amongst others addressing

  8. Introduction to International Trade.

    Science.gov (United States)

    Crummett, Dan M.; Crummett, Jerrie

    This set of student and teacher guides is intended for use in a course to prepare students for entry-level employment in such occupational areas in international trade as business/finance, communications, logistics, and marketing. The following topics are covered in the course's five instructional units: introduction to careers in international…

  9. Transparency for international trade

    Science.gov (United States)

    K. R. Lakin; G. A. Fowler; W. D. Bailey; J. Cavey; P. Lehtonen

    2003-01-01

    U.S. Department of Agriculture - Animal and Plant Health Inspection Service - Plant Protection and Quarantine (USDA-APHIS-PPQ) has developed a Regulated Plant Pest List (RPPL). This provides trading partners with an official list of plant pests of concern to the U.S., along with providing greater transparency of Agency actions.

  10. Globalization and world trade

    Science.gov (United States)

    Peter J. Ince; Joseph Buongiorno

    2007-01-01

    This chapter discusses economic globalization and world trade in relation to forest sector modeling for the US/North American region. It discusses drivers of economic globalization and related structural changes in US forest product markets, including currency exchange rates and differences in manufacturing costs that have contributed to the displacement of global...

  11. Trade Facilitation in Ethiopia:

    African Journals Online (AJOL)

    Tilahun_EK

    so doing, it attempts to examine how Ethiopia's WTO Accession and trade facilitation ... the more expensive imports, exports and production becomes rendering. Ethiopian ..... can reserve the right to refuse requests of importers for the fifth valuation method to ..... units may find it easier to deal with post clearance audit. In the ...

  12. Traits traded off

    NARCIS (Netherlands)

    Rueffler, Claus

    2006-01-01

    The course of evolution is restricted by constraints. A special type of constraint is a trade-off where different traits are negatively correlated. In this situation a mutant type that shows an improvement in one trait suffers from a decreased performance through another trait. In a fixed fitness

  13. Maintenance Trades Guidelines

    Science.gov (United States)

    Weidner, Theodore J.

    2008-01-01

    In 2002, APPA published "Maintenance Staffing Guidelines for Educational Facilities," the first building maintenance trades staffing guideline designed to assist educational facilities professionals with their staffing needs. addresses how facilities professionals can determine the appropriate size and mix of their organization. Contents…

  14. Energy content of world trade

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Gernot [Environmental Defense Fund, 257 Park Avenue South, New York, NY 10010 (United States)

    2010-12-15

    This paper constructs a comprehensive dataset of oil and total energy embedded in world trade of manufacturing goods for 73 countries from 1978 to 2000. Applying the data to debates on the dependency on foreign energy sources makes clear that achieving complete energy independence in the foreseeable future is unlikely to be feasible and may not be desirable. Applying it to the discussion of environmental Kuznets curves (EKCs) highlights an important distinction between production and consumption of energy. Richer countries use relatively less energy in their industrial production yet still consume relatively large amounts of energy indirectly. A further investigation largely excludes structural shifts of production in and out of the manufacturing sector as an explanation for the downward-sloping portion of the EKC. Country-level analyses add caveats but show tentative support for the cross-country conclusions. (author)

  15. Five essays on emissions trading

    Energy Technology Data Exchange (ETDEWEB)

    Godal, Odd

    2005-03-01

    The thesis discusses energy, environmental and economic aspects of polluting emissions with emphasis on greenhouse gas trade and political measures. 5 papers are included with titles: 1) Carbon trading across sources and periods constrained by the Marrakesh Accords which examines examine the potential effects on permit prices and abatement costs of four compliance rules governing emissions trade across sources and periods in the Kyoto Protocol: The banking rule that allows excess permits to be used later; the restoration rate rule that penalizes borrowing; the commitment period reserve rule that limits sales; and finally, the suspension rule that restricts borrowing and sales. Our framework is a two-period model where parties may be out of compliance in the Kyoto period, but are assumed to comply at a later time. Under varying assumptions about market power and US participation, we find that the rules may have pronounced effects on individual costs, but overall efficiency is not severely affected. 2) Affine price expectations and equilibrium in strategic markets which considers equilibrium in imperfect markets, featuring agents who exchange property rights. Important cases include trade in emission permits of greenhouse gases, or exchange of catch quotas of fish. Some players act strategically while others are price-takers. The ''demand curve'' is endogenous, and it affects all parties. The resulting, reduced objectives need not be concave. Therefore, existence of equilibrium is a delicate matter. To simplify things, and to ensure availability of ''equilibria up to first order'', we presume that all strategic agents form affine price expectations. 3) Greenhouse gases, quota exchange and oligopolistic competition that discusses the problem how quotas can be shared in the ''emissions market'' and how can the agents reach as overall equilibrium in the product market. 4) Strategic markets in property rights

  16. Five essays on emissions trading

    Energy Technology Data Exchange (ETDEWEB)

    Godal, Odd

    2005-03-01

    The thesis discusses energy, environmental and economic aspects of polluting emissions with emphasis on greenhouse gas trade and political measures. 5 papers are included with titles: 1) Carbon trading across sources and periods constrained by the Marrakesh Accords which examines examine the potential effects on permit prices and abatement costs of four compliance rules governing emissions trade across sources and periods in the Kyoto Protocol: The banking rule that allows excess permits to be used later; the restoration rate rule that penalizes borrowing; the commitment period reserve rule that limits sales; and finally, the suspension rule that restricts borrowing and sales. Our framework is a two-period model where parties may be out of compliance in the Kyoto period, but are assumed to comply at a later time. Under varying assumptions about market power and US participation, we find that the rules may have pronounced effects on individual costs, but overall efficiency is not severely affected. 2) Affine price expectations and equilibrium in strategic markets which considers equilibrium in imperfect markets, featuring agents who exchange property rights. Important cases include trade in emission permits of greenhouse gases, or exchange of catch quotas of fish. Some players act strategically while others are price-takers. The ''demand curve'' is endogenous, and it affects all parties. The resulting, reduced objectives need not be concave. Therefore, existence of equilibrium is a delicate matter. To simplify things, and to ensure availability of ''equilibria up to first order'', we presume that all strategic agents form affine price expectations. 3) Greenhouse gases, quota exchange and oligopolistic competition that discusses the problem how quotas can be shared in the ''emissions market'' and how can the agents reach as overall equilibrium in the product market. 4) Strategic markets in property rights without price-takers that deals with Cournot-type models of

  17. Trading network predicts stock price.

    Science.gov (United States)

    Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi

    2014-01-16

    Stock price prediction is an important and challenging problem for studying financial markets. Existing studies are mainly based on the time series of stock price or the operation performance of listed company. In this paper, we propose to predict stock price based on investors' trading behavior. For each stock, we characterize the daily trading relationship among its investors using a trading network. We then classify the nodes of trading network into three roles according to their connectivity pattern. Strong Granger causality is found between stock price and trading relationship indices, i.e., the fraction of trading relationship among nodes with different roles. We further predict stock price by incorporating these trading relationship indices into a neural network based on time series of stock price. Experimental results on 51 stocks in two Chinese Stock Exchanges demonstrate the accuracy of stock price prediction is significantly improved by the inclusion of trading relationship indices.

  18. The MOX fuel behaviour test IFA-597.4/.5/.6/.7; Summary of in-pile fuel temperature and gas release data

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Hisashi

    2003-11-15

    It is considered important to study the in-reactor behaviour of MOX fuel in order to enhance the database on such fuel. For this reason, IFA-597.4/.5/.6/.7 were included in the joint research programme of the Halden Project. The series of tests, containing two MIMAS-MOX fuel rods, both equipped with a fuel centre thermocouple and a pressure bellows transducer, has been irradiated in the Halden Reactor since July 1997 under HBWR conditions. The objectives of the test series were to study the thermal and fission gas release (FGR) behaviour of MOX fuel and to explore potential differences in behaviour between solid and hollow pellets. One of the rods had mainly solid pellets, while the other contained only hollow pellets. Both rods had an initial Pu-fissile enrichment of 6.07%. The cladding outside diameter was 9.50 mm, and the initial fuel-clad gap was 180 mum. In the course of the test, power upratings for FGR studies of the MOX fuel were planned at burnup intervals of about 10 MWd/kg MOX. The power uprating was successfully performed at approx10 MWd/kg MOX, where the estimated fuel peak temperature of the solid pellets exceeded the FGR threshold temperature for UO{sub 2} fuel, while that of the hollow pellets remained below the threshold. For the solid fuel, the temperature at onset of FGR was consistent with the empirical threshold temperature for UO{sub 2} fuel. For the hollow fuel, gas release was observed at temperatures below the threshold. FGRs at the end-of-life were approx17% for the solid pellet rod and approx14% for the hollow pellet rod, respectively. As a result of discussions in HPG meetings, IFA-597.7 was unloaded in January 2002. PIE was carried out to check in-pile pressure measurements and examine fuel structural characteristics. The discharge burn-up of the MOX fuel was 32 MWd/kg MOX as determined from in-pile power data. This report supersedes HWR-712 (June 2002) previously issued on in-pile data from IFA-597.4/5/6/7. (Author)

  19. International Trade In Forest Products

    Science.gov (United States)

    Jeffrey P. Prestemon; Joseph Buongiomo; David N. Wear; Jacek P. Siry

    2003-01-01

    The 21st century continues a trend of rapid growth in both international trade of forest products and a concern for forests. These two trends are connected. Forces causing trade growth are linked to the loss of native forest resources in some countries and the accumulation of nonnative forest resources in other countries. Factors increasing trade...

  20. Life History Trade-offs

    NARCIS (Netherlands)

    Smallegange, I.M.; Kliman, R.M.

    2016-01-01

    Trade-offs play a central role in life history theory. This article explains why they exist, how they arise, how they can be measured, and briefly discusses their evolution. Three important trade-offs are discussed in detail: the trade-off between current reproduction and survival, between current

  1. Trading CO2 emission; Verhandelbaarheid van CO2-emissies

    Energy Technology Data Exchange (ETDEWEB)

    De Waal, J.F.; Looijenga, A.; Moor, R.; Wissema, E.W.J. [Afdeling Energie, Ministerie van VROM, The Hague (Netherlands)

    2000-06-01

    Systems for CO2-emission trading can take many shapes as developments in Europe show. European developments for emission trading tend to comprehend cap and-trade systems for large emission sources. In the Netherlands a different policy is in preparation. A trading system for sheltered sectors with an option to buy reductions from exposed sectors will be further developed by a Commission, appointed by the minister of environment. Exposed sectors are committed to belong to the top of the world on the area of energy-efficiency. The authors point out that a cap on the distribution of energy carriers natural gas, electricity and fuel seems to be an interesting option to shape the trade scheme. A cap on the distribution of electricity is desirable, but not easy to implement. The possible success of the system depends partly on an experiment with emission reductions. 10 refs.

  2. Trade, development, and regulatory issues in food.

    Science.gov (United States)

    Ramaswamy, Sunder; Viswanathan, Brinda

    2007-03-01

    Trade in food and animal products has increased several-fold in the past decade, and simultaneously regulations governing the movement of such products across national boundaries have also increased. The present study reviews harmonization in food trade regulation by focusing on nutritional aspects to understand its role in enhancing world trade on the one hand and consumer interest and welfare on the other. Harmonization to a large extent brings in more regulation from the developed world acting through their governments, consumer organizations, and multinational companies; it does not seem to address, in general, the concerns of the large segments of the poor population for whom agriculture and food trade are the main sources of livelihood. There is a lack of quantifiable estimates of the loss in well-being of the disadvantaged. However, there is substantial research focused on the potential harm to developed nations as a result of nonadherence to the rules. Clearly, lack of adequate infrastructure, resource constraints, and weak institutions not only result in poor food safety regulation within developing countries but also remain barriers to realizing the greater potential benefits from increased trade. Harmonization of standards would have some losers and some winners, but to make it more inclusive, scientific knowledge alone may not be adequate; social and cultural aspects also need to be considered, since food systems differ among regions, with varying preferences, local resource availability, and levels of economic development. Improvement in governance in many countries not only would ensure better participation in international rule-making and the negotiation process for fairer trade but also would result in effective domestic legislation to ensure safer health for citizens, resulting in higher overall well-being.

  3. Plurilateral Trade Deals: An Alternative for Multilateral Trade Agreements?

    Directory of Open Access Journals (Sweden)

    Agnes Ghibuțiu

    2016-04-01

    Full Text Available While multilateral trade negotiations under the World Trade Organization (WTO continue to be in impasse, plurilateral trade negotiations – i.e. among a group of WTO members – have intensified in recent years, and also recorded a series of concrete results in liberalizing specific sectors of international trade. Hence, there is a widely shared view that plurilateral trade negotiations could be an alternative for the multilateral ones. This paper aims to answer the following questions: What are plurilateral trade agreements? Which are the reasons behind the surge in plurilateral negotiations in recent years? What are the main achievements in liberalizing trade at the plurilateral level? What are the advantages of plurilateral negotiations relative to multilateral ones, and why are they considered an attractive alternative for negotiations at the multilateral level?

  4. In-pile Tritium Permeation through F82H Steel with and without a Ceramic Coating of Cr2O3-SiO2 Including CrPO4

    International Nuclear Information System (INIS)

    Nakamichi, M.; Hayashi, K.; Kulsartov, T.V.; Afanasyev, S.E.; Shestakov, V.P.; Chikhray, Y.V.; Kenzhin, E.A.; Kolbaenkov, A.N.

    2006-01-01

    Development of coating on blanket structural materials with significant reduction capability of tritium permeation is highly required in order to realize a reasonable design of a tritium recovery and processing system of demonstration (DEMO) fusion reactors. An effective coating has been developed in Japan Atomic Energy Agency (JAEA) using a ceramic material of Cr 2 O 3 -SiO 2 including CrPO 4 . In previous out-of-pile deuterium permeation experiments at 600 o C [T.V. Kulsartov et al., Fusion Eng. Des. 81 (2006) 701], a significant permeation reduction factor (PFR) of about 300 was obtained for the coating on the inner-side surface of tubular diffusion cells made by ferritic steel (F82H). In the present study, in-pile experiments on tritium permeation were conducted for F82H steel with and without the same coating, using a testing reactor IGV-1M in Kazakhstan. The tritium source used was liquid lithium-lead eutectics, Pb17Li, which was poured into a space around a tubular diffusion cell (specimen) of F82H steel with or without the coating on the inner side the cell. The irradiation time was about 4 hours, which corresponds to a fast-neuron fluence of about 2x10 21 m -2 (E > 1.1 MeV). The permeation reduction factor (PRF) was obtained by comparison of kinetics curves of tritium permeation through the diffusion cell of F82H steel with and without the coating. The PRFs at 600 and 500 o C were 292 and 30, respectively. These values are close to corresponding PRF values of 307 and 45, which had been obtained at 600 and 500 o C, respectively, in the previous out-of-pile experiments [T.V. Kulsartov et al., Fusion Eng. Des. 81 (2006) 701]. (author)

  5. GOVERNING THE TAXATION OF DIGITIZED TRADE

    OpenAIRE

    RAHUL MUKHERJI

    2002-01-01

    The paper highlights the challenges for international taxation due to digitized trade. Digitization makes it easy to penetrate foreign markets without the need for physical presence in the buyer’s country. This phenomenon has generated debates on the salience of source versus residence-based taxation, the definition of permanent establishment, and, the administration of consumption taxes. The WTO has not been able to engage effectively in this area. The paper notes both the inadequacy of unil...

  6. Maritime Trade Warfare Against a Modern Power

    Science.gov (United States)

    2013-05-20

    Malaysian and Singaporean support. Operational Environment The previous sections have assessed that an oil embargo would be effective at influencing...will be addressed. The first approach is to stop the trade at its source. This approach forms the foundation of many contemporary sanctions. Under...antisubmarine warfare capable ships, could be sufficient to defend against forces attempting to break a blockade, and a carrier battle group in the Indian Ocean

  7. Trade in tourism services

    DEFF Research Database (Denmark)

    Jensen, Camilla; Zhang, Jie

    2013-01-01

    The article addresses two questions related with tourism as a service trade. Can tourism be explained as other export activities? Does service liberalisation have a positive or negative impact on tourism receipts in destination countries? Previous research has either focused on the demand side...... factors (i.e. factors of demand in the origin countries) or on tourism as a long-run factor of economic growth. The research shows that a complementary perspective such as that offered by trade in a supply side perspective can render additional insights towards understanding tourism. This approach can...... explain why countries have absolute and comparative advantage. Another finding is that tourism as an export can be explained by some of the same destination factors that explain other service exports. Using different panel estimators the importance of supply side factors that are to some extent exclusive...

  8. Tariffs on power trading

    International Nuclear Information System (INIS)

    Van de Water, C.J.

    1995-01-01

    For optimal use of power systems, transmission services must be independent from production. Moreover the costs of electrical energy transmission should be well known and be paid according to a tariff system approximating to the real network costs. These two conditions for power trading will lead to an optimal power system. In a competitive power production market, the transmission and distribution companies will remain monopolistic because they are the only facilitators of power trading. The pricing signals of the transmission and distribution costs determine the playing field for the competitors. These are production offers and bidders. The transmission pricing must for that reason be simple, correct and based on marginal costs to make optimal use of the system

  9. Worlds Apart Trading Together

    DEFF Research Database (Denmark)

    Evers, Kasper Grønlund

    This study sets out to replace the out-dated notion of ‘Indo-Roman trade’ with a more informed perspective integrating the new findings of the last 30 years.In order to accomplish this, a perspective focusing on concrete demand from the ground up is adopted, also shedding light on the role...... of the market in long-distance exchange. Accordingly, the analysis conducted demonstrates that an economically highly substantial trade took place between the Mediterranean and the Indian Ocean in the 1st–6th century CE, altering patterns of consumption and modes of production in India andSouth Arabia as well...... as the Roman Empire.Significantly, it can be documented that this trade was organised at the centres of demand and supply, in Rome and India, respectively, by comparable urban associations, the transport in-between being handled by equally well-organised groups of seagoing merchants.Consequently, this study...

  10. Trade union revitalisation

    DEFF Research Database (Denmark)

    Ibsen, Christian Lyhne; Tapia, Maite

    2017-01-01

    In this article, we review and assess research on the role of trade unions in labour markets and society, the current decline of unions and union revitalisation. The review shows three main trends. First, trade unions are converging into similar strategies of revitalisation. The ‘organising model...... their traditional strongholds of collective bargaining and corporatist policy-making. Second, research has shown that used strategies are not a panacea for success for unions in countries that pearheaded revitalisation. This finding points to the importance of supportive institutional frameworks if unions...... in adverse institutional contexts, can be effective when they reinvent their repertoires of contention, through political action or campaigning along global value chains....

  11. The Carbon Trading Game

    International Nuclear Information System (INIS)

    Fouquet, Roger

    2003-12-01

    In response to the Kyoto Protocol, an international market for carbon dioxide tradable permits is likely to be created. Two of the key issues involved are explaining the concepts of tradable permits to industrialists, policy-makers and the man on the street, and anticipating how the market will evolve. A simple game of the market for carbon dioxide tradable permits has been developed and used that can help deal with both issues. As a pedagogical tool, this game benefits from simplicity (just a few pieces of paper are needed) and enables students to grasp the concepts and remember them through the intensity and fun of a trading 'pit'. The experiences also provide substantial insights into the evolution of the carbon dioxide permit market, particularly related to the evolution of trade volume, permit prices and country strategies

  12. Gender Inequality and Trade

    OpenAIRE

    Busse, Matthias; Spielmann, Christian

    2004-01-01

    The paper empirically explores the international linkages between gender inequality and trade flows of a sample of 92 developed and developing countries. The focus is on comparative advantage in labour-intensive manufactured goods. The results indicate that gender wage inequality is positively associated with comparative advantage in labour-intensive goods, that is, countries with a larger gender wage gap have higher exports of these goods. Also, gender inequality in labour force activity rat...

  13. International Trade Crisis

    OpenAIRE

    Popa Diana

    2011-01-01

    This article captures a brief history of the negotiations of the Doha Development Agenda (DDA), analyzes its deadlock and offers some suggestions for a successful Doha deal. First, this study shows that the nearly decade-long negotiation stalemate is caused by the opposite perceptions between industrialized countries and developing ones on agriculture, as well as by the influences of economic crisis on the world trade. Subsequently, some proposals are presented to solve the current crisis fro...

  14. Trading as Entertainment?

    OpenAIRE

    Daniel Dorn; Paul Sengmueller

    2009-01-01

    Among 1,000 German brokerage clients for whom both survey responses and actual trading records are available, investors who report enjoying investing or gambling turn over their portfolio at twice the rate of their peers. Including entertainment attributes as additional explanatory variables in cross-sectional regressions of portfolio turnover on objective investor attributes more than doubles the fraction of the total variation of portfolio turnover that can be explained. The results are rob...

  15. Firms, Technology and Trade

    OpenAIRE

    Caldera Sanchez, Aida

    2010-01-01

    This doctoral dissertation studies the effect of economic integration on the performance of firms. The ongoing process of global economic integration has been characterized by dismantling of trade barriers and openness to foreign direct investments (FDI). These changes have not only brought opportunities to firms in terms of market access and the possibility to learn about foreign technologies brought in by foreign counterparts. The new economic environment has also posed new challenges throu...

  16. In-pile TREAT Test L04: simulating a lead sub-assembly in an unprotected LMFBR loss-of-coolant accident

    International Nuclear Information System (INIS)

    Tylka, J.P.; Bauer, T.H.; Wright, A.E.; Davies, A.L.; Herbert, R.; Woods, W.J.

    1983-01-01

    Test L04 in the PFR/TREAT series is the first multi-pin, in-pile simulation of a LMFBR transient undercooling/overpower (TUCOP) accident using full length prototypic fuel irradiated in a fast reactor. L04 is a gridded 7-pin bundle test performed in the ANL Mk-III integral loop in a flowing sodium environment and uses prototypic, bottom plenum, UK reactor fuel, preirradiated in the PFR to an axial peak burn-up of 4.2 a/o. The objective of L04 was the study, by simulation, of coolant voiding and fuel motion during the initiating phase of a hypothetical TUCOP accident in a large LMFBR. Test L04 is intended to study the behavior of a centrally located, lead subassembly with the highest power-to-flow ratio

  17. Chemical effects of 13N produced by recoil protons and deuterons in pile-irradiated methanol and methanol-d4

    International Nuclear Information System (INIS)

    Sensui, Y.; Tomura, K.; Matsuura, T.

    1982-01-01

    The stabilized chemical forms of 13 N resulting from the reactions 13 C(p,n) 13 N by a recoil proton and 12 C(d,n) 13 N by a recoil deuteron, were studied in pile-irradiated methanol and methanol-d 4 in the temperature range from 77 to 295 K. Contrary to the target of benzene, cyclohexane, acetone and diethyl ether previously studied, the relative yield of 13 N-compounds did not depend on the irradiation temperature in the present media. In the yield of 13 N-compounds no marked change was observed between methanol and methanol-d 4 , differing from the results between benzene and benzene-d 6 . A mechanism is proposed to explain the results. (author)

  18. In-pile test results of U-silicide or U-nitride coated U-7Mo particle dispersion fuel in Al

    Science.gov (United States)

    Kim, Yeon Soo; Park, J. M.; Lee, K. H.; Yoo, B. O.; Ryu, H. J.; Ye, B.

    2014-11-01

    U-silicide or U-nitride coated U-Mo particle dispersion fuel in Al (U-Mo/Al) was in-pile tested to examine the effectiveness of the coating as a diffusion barrier between the U-7Mo fuel kernels and Al matrix. This paper reports the PIE data and analyses focusing on the effectiveness of the coating in terms of interaction layer (IL) growth and general fuel performance. The U-silicide coating showed considerable success, but it also provided evidence for additional improvement for coating process. The U-nitride coated specimen showed largely inefficient results in reducing IL growth. From the test, important observations were also made that can be utilized to improve U-Mo/Al fuel performance. The heating process for coating turned out to be beneficial to suppress fuel swelling. The use of larger fuel particles confirmed favorable effects on fuel performance.

  19. In-pile test results of U-silicide or U-nitride coated U-7Mo particle dispersion fuel in Al

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Soo, E-mail: yskim@anl.gov [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Park, J.M.; Lee, K.H.; Yoo, B.O. [Korea Atomic Energy Research Institute, 989-111 Daedeokdaero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Ryu, H.J. [Dept. of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Ye, B. [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States)

    2014-11-15

    U-silicide or U-nitride coated U-Mo particle dispersion fuel in Al (U-Mo/Al) was in-pile tested to examine the effectiveness of the coating as a diffusion barrier between the U-7Mo fuel kernels and Al matrix. This paper reports the PIE data and analyses focusing on the effectiveness of the coating in terms of interaction layer (IL) growth and general fuel performance. The U-silicide coating showed considerable success, but it also provided evidence for additional improvement for coating process. The U-nitride coated specimen showed largely inefficient results in reducing IL growth. From the test, important observations were also made that can be utilized to improve U-Mo/Al fuel performance. The heating process for coating turned out to be beneficial to suppress fuel swelling. The use of larger fuel particles confirmed favorable effects on fuel performance.

  20. Absolute on-line in-pile measurement of neutron fluxes using self-powered neutron detectors: Monte Carlo sensitivity calculations

    Energy Technology Data Exchange (ETDEWEB)

    Vermeeren, L. [SCK/CEN, B-2400 Mol (Belgium)

    2001-07-01

    Self-powered neutron detectors (SPND) are well suited to monitor continuously the neutronic operating conditions of driver fuel of research reactors and to follow its burnup evolution. This is of particular importance when advanced or new MTR fuel designs need to be qualified. We have developed a detailed MCNP-4B based Monte Carlo approach for the calculation of neutron sensitivities of SPNDs. Results for the neutron sensitivity of a Rh SPND are in excellent agreement with experimental data recently obtained at the BR2 research reactor. A critical comparison of the Monte Carlo results with results from standard analytical methods reveals an important deficiency of the analytical methods in the description of the electron transport efficiency. Our calculation method allows a reliable on-line determination of the absolute in-pile neutron flux. (author)

  1. Absolute on-line in-pile measurement of neutron fluxes using self-powered neutron detectors: Monte Carlo sensitivity calculations

    International Nuclear Information System (INIS)

    Vermeeren, L.

    2001-01-01

    Self-powered neutron detectors (SPND) are well suited to monitor continuously the neutronic operating conditions of driver fuel of research reactors and to follow its burnup evolution. This is of particular importance when advanced or new MTR fuel designs need to be qualified. We have developed a detailed MCNP-4B based Monte Carlo approach for the calculation of neutron sensitivities of SPNDs. Results for the neutron sensitivity of a Rh SPND are in excellent agreement with experimental data recently obtained at the BR2 research reactor. A critical comparison of the Monte Carlo results with results from standard analytical methods reveals an important deficiency of the analytical methods in the description of the electron transport efficiency. Our calculation method allows a reliable on-line determination of the absolute in-pile neutron flux. (author)

  2. International trade and environment

    International Nuclear Information System (INIS)

    Posada, Luis Guillermo

    1998-01-01

    The international trade conventional theory not only continues being supported upon the classic principle of comparative advantage, but also, in response to the rationality inherent to the traditional economic system, al so neglects considering the biophysical conditions under which transable goods are produced. The linkage of environment to trade is a recent concern, and it is explained on the basis that the first one has become a barrier for the second one. The environmental cause defenders, so as the free market advocates, are exposing their arguments in a context in which not necessarily to build viable solutions to the conflict is possible. The world economy behavior and tendencies do not offer the conditions needed so as that the official thesis in which the GATT - Rio - WTO thought can be summarized and the positive linkage towards the environmental quality, explicitly claimed by that thesis, becomes reality. Form these considerations, it is argument in this article in the direction of establishing a new international trade pattern and also some ideas are presented as to its characterization ecological economic view

  3. INTERNATIONAL TRADE WHITH RAPESEED

    Directory of Open Access Journals (Sweden)

    Radu Lucian PÂNZARU

    2013-01-01

    Full Text Available The study takes into consideration the international trade situation of rapeseed worldwide. To highlight the situation are analyzed sequentially imports and exports in five units continents: Africa, America, Asia, Europe and Oceania. Applicability and interest increased for trade with this product is emphasized by references from Romania. The study takes into consideration 2008-2010. In terms of world imports and their structure is noted preponderance Europe and Asia in the quantities imported - 87.38% (both, the weights low enough for Oceania and Africa - 0.04 together. If we analyze the situation of exports is apparent fact that Europe remains, as in the case of imports, the main player on the market (48.11%, but not followed by Asia, but of America with a very close relative weight (44 , 45%. Oceania owns more than 5% of world quantitatively of exports, while Asia and Africa have shares almost insignificant - 0.36 and 0.05% respectively. Regarding the situation of global trade balance exchanges for rapeseed can be seen a globally deficient character.

  4. INTERNATIONAL TRADE WITH ONIONS

    Directory of Open Access Journals (Sweden)

    Radu Lucian PÂNZARU

    2013-01-01

    Full Text Available The paper refers to the global trade situation with onion, 2008-2010. Besides presenting the existing situation of the five units continents (Africa, America, Asia, Europe and Oceania study shows worldwide level of imports and exports, as well as its contribution to the performing acts of international exchange. Quantitative aspects of trade are filled with values data, that allowed the preparation of trade exchanges for this product. The main importer (in quantitative terms is represented by Asia, followed by Europe and at greater distance by the America, while the value of imports was dominated by operations performed in Europe, Asia and America - weights of 39.7 , 38.1 and 18.6% respective (of the world total. Concerning the quantity, the major players on the market exports are represented by Asia and Europe. They have dominated the world market, achieving 45.6 and respective 30.8% of world exports. America ranks third with a share of 17.4%. In terms of value, world exports were dominated by Asia, Europe and America (33.5, 32.7 and respective 26.7%, with a downward trend in the share of Asia and increasing European weights and American (compared to the specific situation of the quantities exported

  5. Trade networks in West Africa

    DEFF Research Database (Denmark)

    Walther, Olivier

    2014-01-01

    To date, most of the literature on trade networks in West Africa has considered networks in a metaphorical way. The aim of this paper is to go one step further by showing how social network analysis may be applied to the study of regional trade in West Africa. After a brief review of the literature......, this exploratory paper investigates two main issues related to regional trade. We start by discussing how recent developments in regional trade in West Africa have contributed to challenging the social structure of traders. We then discuss the changes that have affected the spatiality of regional trade by looking...

  6. THE LEGAL CAPACITY TO TRADE

    OpenAIRE

    ADELIN UNGUREANU

    2014-01-01

    Trading is a part of our society. The man has been trading from ancient times so the amount of trades and transactions around the world is huge. In order for us to initiate, organize and deploy such trades we have to have certain rules which can help regulate the social and professional or legal aspect of trades. Therefore the sole trader capacity must be obtained and used in order for the contracts to be valid. The right and obligations that come with this capacity constitute activities t...

  7. International Trade of Biofuels (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2013-05-01

    In recent years, the production and trade of biofuels has increased to meet global demand for renewable fuels. Ethanol and biodiesel contribute much of this trade because they are the most established biofuels. Their growth has been aided through a variety of policies, especially in the European Union, Brazil, and the United States, but ethanol trade and production have faced more targeted policies and tariffs than biodiesel. This fact sheet contains a summary of the trade of biofuels among nations, including historical data on production, consumption, and trade.

  8. THE LEGAL CAPACITY TO TRADE

    Directory of Open Access Journals (Sweden)

    ADELIN UNGUREANU

    2014-12-01

    Full Text Available Trading is a part of our society. The man has been trading from ancient times so the amount of trades and transactions around the world is huge. In order for us to initiate, organize and deploy such trades we have to have certain rules which can help regulate the social and professional or legal aspect of trades. Therefore the sole trader capacity must be obtained and used in order for the contracts to be valid. The right and obligations that come with this capacity constitute activities that can be reflected and analysed by obtaining and maintain the sole trader status.

  9. An Evaluation of the Intermediation Role of Hong Kong in Chinese Foreign Trade

    OpenAIRE

    Xinhua He

    2007-01-01

    Two different data sources can be used to study Hong Kong's role in intermediating China's foreign trade. One is the bilateral trade statistics between Hong Kong and the Chinese Mainland reported by National Bureau of Statistics of China, and the other is the bilateral trade statistics published by Census and Statistics Department, Hong Kong. The corresponding statistics are not comparable to each other because of the different statistical criteria adopted by each source. Hong Kong's intermed...

  10. The ASEAN Free Trade Agreement: impact on trade flows and external trade barriers

    OpenAIRE

    Hector Calvo-Pardo; Caroline Freund; Emanuel Ornelas

    2009-01-01

    Using detailed data on trade and tariffs from 1992-2007, the authors examine how the ASEAN Free Trade Agreement has affected trade with nonmembers and external tariffs facing nonmembers. First, the paper examines the effect of preferential and external tariff reduction on import growth from ASEAN insiders and outsiders across HS 6-digit industries. The analysis finds no evidence that prefe...

  11. Irradiation experiments of 3rd, 4th and 5th fuel assemblies by an in-pile gas loop, OGL-1

    International Nuclear Information System (INIS)

    Fukuda, Kousaku; Kobayashi, Fumiaki; Hayashi, Kimio; Minato, Kazuo; Kikuchi, Teruo; Adachi, Mamoru; Iwamoto, Kazumi; Ikawa, Katsuichi; Itami, Hiroharu.

    1986-07-01

    Three irradiation experiments for 3rd, 4th and 5th fuel assemblies which had been composed of VHTR reference coated particle fuels and graphite components were carried out by an in-pile gas loop, OGL-1 during 1979 and 1982. The main purposes of these experiments were to study on bowing of the fuel rod by irradiation for the 3rd fuel assembly, to study on fuel behavior under relatively low burnup irradiation for the 4th fuel assembly, and to study on fuel behavior up to full burnup of VHTR design for the 5th fuel assembly. For understanding in-pile fuel behavior, fractional releases of fission gases from each fuel assembly were estimated by measuring the fission gas concentrations in the primary loop of OGL-1. The post-irradiation examination (PIE) was carried out extensively on the fuel block, the fuel rods and the fuel compacts in Tokai Hot Laboratory. Also, made were the measurements of metallic fission product distributions in the fuel assemblies and the fuel rods. The results in these experiments were given as follows ; bowing of the fuel rod in the 3rd fuel assembly was 0.7 mm, but integrity of the rod was kept under irradiation. Fractional release of the fission gas from the 4th fuel assembly remained in the order of 10 -7 during irradiation, suggesting that the fuel performance was excellent. The fractional release from the 5th fuel assembly, on the other hand, was in the order of 10 -5 which was the same level in the VHTR design. (author)

  12. Preparation of a thermal-hydraulic design method for driver core fuel pins of a new in-pile experimental reactor for FBR safety research

    International Nuclear Information System (INIS)

    Mizuno, Masahiro; Yamaguchi, Katsuhisa; Uto, Nariaki

    1999-07-01

    A design study of a new in-pile experimental reactor, SERAPH (Safety Engineering Reactor for Accident PHenomenology), for FBR safety research has progressed at JNC (Japan Nuclear Cycle Development Institute). SERAPH is intended for various in-pile experiments to be performed under quasi-steady state and various transient operation modes. In order to evaluate the driver core performance in conducting such experiments, clarify the relating design issues to be resolved and refine the experimental needs, it is indispensable to comprehend the allowable margin for the thermal-hydraulic fuel pin design since it largely affects the strategy for the driver core design. This report presents a thermal-hydraulic design method for the driver core fuel pins, which is a combination of a two-dimensional time-dependent heat transfer analysis code TAC-2D and a general non-linear finite-element structural analysis code FINAS. In TAC-2D, the allowable spatial mesh and the time step sizes are evaluated. The code is modified so as to treat time-dependent thermal properties, include an improved gap heat-transfer model and treat the change of intra-pin gap width under transient modes, for the purpose of improving the accuracy of evaluating heat transfer characteristics which gives a significant impact on the thermal-hydraulic design. As for FINAS, the number of element nodes and spatial meshes required to obtain adequate accuracy for the thermal stress characteristics of a fuel pellet during transient modes are investigated. In addition, post-processing tools are newly developed to process the calculation results obtained from these codes. The results of this work contribute to advancing the fuel pin design study for SERAPH as well with the investigation on the technique of manufacturing fuel pins. (author)

  13. Gravity with Intermediate Goods Trade

    Directory of Open Access Journals (Sweden)

    Sujin Jang

    2017-12-01

    Full Text Available This paper derives the gravity equation with intermediate goods trade. We extend a standard monopolistic competition model to incorporate intermediate goods trade, and show that the gravity equation with intermediates trade is identical to the one without it except in that gross output should be used as the output measure instead of value added. We also show that the output elasticity of trade is significantly underestimated when value added is used as the output measure. This implies that with the conventional gravity equation, the contribution of output growth can be substantially underestimated and the role of trade costs reduction can be exaggerated in explaining trade expansion, as we demonstrate for the case of Korea's trade growth between 1995 and 2007.

  14. Suitability of non-energy GHGs for emissions trading

    International Nuclear Information System (INIS)

    Haites, E.; Proestos, A.

    2000-01-01

    This paper assesses the suitability of different sources of non-energy greenhouse gases for emissions trading. Different forms of emissions trading are defined and criteria for determining whether a source is suitable for emissions trading are proposed. The suitability for emissions trading is assessed for: methane (CH4) from oil and gas production; CH4 from coal mines; CH4 from landfills; CH4 from wastewater treatment; CH4 from enteric fermentation; CH4 from livestock manure, nitrous oxide (N2O) from adipic acid production; N2O from fertilizer use; N2O from nitric acid production, carbon dioxide (CO2) and perfluorocarbons (PFCs) from aluminum smelting; sulphur hexafluoride (SF6) from magnesium smelting and die casting; HFCs from HCFC production, other uses of SF6, PFCs and hydrofluorocarbons (HFCs); CO2 from ammonia production; lime and cement production, and iron ore reduction

  15. Emissions trading and green power : profitability for buyers and sellers

    International Nuclear Information System (INIS)

    Haites, E.

    1998-01-01

    Proposed features of the competitive electricity market in Ontario were reviewed. The speaker predicted that demand for renewable energy in Ontario's competitive electricity market will be affected by green power, emissions trading, labelling, and renewables portfolio standard. Under current regulations retailers can charge customers a premium for purchasing electricity generated by 'green' sources. The existing limits on emissions of sulphur dioxide, nitrogen oxides and carbon dioxides will remain in place, but an emissions cap and trading program for all Ontario-based generation is an option to consider. Ontario's Market Design Committee (MDC) has recommended the implementation of emissions trading for electricity-related air pollutants for all generators located in Ontario. The complex mechanics of emission trading are explained. The MDC recommendation of the use of standard labels to disclose the mix of energy sources used by sellers of electricity and their associated pollution emissions are also summarized

  16. Study of atmospheric emission trading programs in the United States

    International Nuclear Information System (INIS)

    1991-01-01

    A detailed review and evaluation was conducted of federal and state atmospheric emission trading programs in the USA to identify the factors critical to a successful program. A preliminary assessment was also made of the feasibility of such a program for NOx and volatile organic compounds (VOC) in the lower Fraser Valley in British Columbia. To date, experience in the USA with atmospheric emissions trading has primarily involved trades of emission reduction credits pursuant to the 1977 Clean Air Act amendments. Most trades occur under netting provisions which allow expansion of an existing plant without triggering the stringent new-source review process. Six case studies of emissions trading are described from jurisdictions in California, New Jersey, and Kentucky and from the national SO 2 allowance trading program. Estimates of cost savings achieved by emissions trading are provided, and factors critical to a successful program are summarized. These factors include clearly defined goals, participation proportional to problem contribution, an emissions inventory of satisfactory quality, a comprehensive permit system, a credible enforcement threat, efficient and predictable administration, location of the program in an economic growth area, and support by those affected by the program. In the Fraser Valley, it is concluded that either an emissions reduction credit or an allowance trading system is feasible for both NOx and VOC, and recommendations are given for implementation of such a program based on the factors determined above. 1 fig., 8 tabs

  17. 15 CFR 400.45 - Retail trade.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Retail trade. 400.45 Section 400.45 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) FOREIGN-TRADE ZONES BOARD, DEPARTMENT OF COMMERCE REGULATIONS OF THE FOREIGN-TRADE ZONES BOARD Zone Operations and...

  18. Trade Liberalization, Mergers and Acquisitions, and Intra-Industry Reallocations

    DEFF Research Database (Denmark)

    Bache, Peter Arendorf

    This paper presents a Melitz-type model of international trade in final goods and Grossman-Hart-Antràs input sourcing by heterogeneous firms. We show how firms self-select into different organizational forms in a continuum of industries with different characteristics. Next, we show how a liberali...... a liberalization of trade leads to short run increases in the number of firm mergers and acquisitions and potentially new gains from trade. Finally, we show how the relative prevalence of integrating firms is increasing in some industries while constant in all others....

  19. Oil refining in U.S. foreign-trade zones

    International Nuclear Information System (INIS)

    Powell, S.J.; Potter, T.J.

    1991-01-01

    With the crude-oil import supply being as inexpensive as it is today, relative to domestic supply, many independents have been sourcing their crude-oil needs from abroad and have found it an opportune time to step up their level of refining activity. To further enhance their competitive position with respect to foreign refineries, certain domestic refiners have discovered the operational benefits and savings that result from having a refinery designated as a foreign-trade zone (FTZ) under the Foreign-Trade Zones Act of 1934, as amended. This paper examines the history and use of foreign-trade subzones for refining activities

  20. Foreign Trade Dvelopment between Libya and the European Union

    OpenAIRE

    Mansoor Maitah; Nassir Salim; Abulgasem Bazina

    2011-01-01

    This article deals with the analysis of foreign trade development betweenLibyaand the European Union in the recent years. Libya is one of the developing countries with large area, low density of population and large endowment of natural resources, oil and gas. The Libyan economy like a number of other Arab economies, depends heavily on oil revenue, it relies heavily on a single exportable commodity, as the main source of foreign exchange earnings. Trade relations betweenLibyaand the European ...

  1. Components of the Profitability of Technical Currency Trading

    OpenAIRE

    Schulmeister, Stephan

    2005-01-01

    This paper investigates the sources of the profitability of 1024 moving average and momentum models when trading in the German mark (euro)/U.S. dollar market based on daily data. The main results are as follows. First, each of these models would have been profitable over the entire sample period. Second, this profitability is exclusively due to the exploitation of persistent exchange rate trends. Third, these results do not change substantially when trading is examined within subperiods. Four...

  2. Trade Policy Preferences and the Factor Content of Trade

    DEFF Research Database (Denmark)

    Jäkel, Ina Charlotte; Smolka, Marcel

    demonstrate that the factor price changes induced by trade policy are negatively correlated with the factor content of free trade (and therefore factor abundance). Using large-scale international survey data, we test whether these predicted distributional effects are reflected in the trade policy preferences...... of workers with different labor market skills. In order to isolate the effects of factor abundance from other skill-related confounding factors, we employ a within-skill-group estimator that exploits the cross-country variation in the factor content of free trade. In line with theory, the data show......This paper provides a theoretical and empirical analysis of public opinion towards free trade, investigating cleavages both between and within countries. We study the distributional effects of trade policy in a neoclassical economy with not just two, but many input factors in production. We...

  3. Application Actuation Trade Study

    Science.gov (United States)

    1982-01-01

    32 RCA PRICE-L Podel Calculated 0 & S Values 138 33 RCA PRICE LCC Summery - Typical LRU 139 34 Airplane Actuation Trade Study LCC Summary 140 35...results achieved can be duplicated by a user. The RCA PRICE Podel calculates the RDTSE. Production cost, and creates the YiDF file for use in the PCA...PR ICE L). Some of the basic program ground rules for this study were as follows: RCA - PRICE Cost Podel RCA - PRICE L Model Prototype Hardware 10

  4. Trading health for money

    DEFF Research Database (Denmark)

    Ajslev, Jeppe Zielinski Nguyen; Møller, Jeppe Lykke; Persson, Roger

    2017-01-01

    Construction work is physically demanding and often associated with bodily pain. This article presents a study of construction workers’ practices of using and relating to their bodies at work through an agential realist framework for analysing the (re)configuration of the workers’ embodied...... subjectivity. The analysis draws on interviews with 32 Danish construction workers as well as brief observations. The article shows how ‘trading health for money’ becomes a mode for maintaining positive social, occupational and masculine identity among construction workers. Furthermore, it shows how the agency...

  5. International trade in uranium

    International Nuclear Information System (INIS)

    Two reports are presented; one has been prepared by the Uranium Institute and is submitted by the United Kingdom delegation, the other by the United States delegation. The report of the Uranium Institute deals with the influence of the government on international trade in uranium. This influence becomes apparent predominantly by export and import restrictions, as well as by price controls. The contribution submitted by the United States is a uranium market trend analysis, with pricing methods and contracting modes as well as the effect of government policies being investigated in the light of recent developments

  6. International nuclear trade

    International Nuclear Information System (INIS)

    Biad, A.; Cormis, F. de; Kerever, A.

    1998-01-01

    This third part is relative to the international nuclear trade it includes: the 1996 EURATOM/Usa Agreement on the peaceful Uses of nuclear energy: EURATOM Strengthened, a case study on IVO Power engineering Oy as a supplier to Russia, lessons learned from the Us/EURATOM Agreement for Cooperation, negotiating the parameters of nuclear regulation: lessons from South Africa, Good and new business in Brazil's nuclear energy field, cooperation between Russia and european union in the nuclear field: the legal basis, present status and future prospects, the industrial implications of the non proliferation policy. (N.C.)

  7. Passive-Aggressive Trading

    DEFF Research Database (Denmark)

    Christoffersen, Susan E. K.; Keim, Donald B.; Musto, David K.

    Fund managers can demand liquidity for their trading ideas or provide liquidity for others’ ideas. We identify the roles of these motives using a database of the individual transactions by Canadian equity funds. Both the cost and subsequent performance of their buys decline after strong inflows......, indicating the depletion of ideas and substitution into liquidity provision as funds put new money to work. Sales show little of this substitution, consistent with funds’ narrower latitude to provide liquidity to buyers. In general, the option to provide liquidity makes fund returns positive...

  8. Act locally, trade globally. Emissions trading for climate policy

    Energy Technology Data Exchange (ETDEWEB)

    none

    2005-07-01

    Climate policy raises a number of challenges for the energy sector, the most significant being the transition from a high to a low-CO2 energy path in a few decades. Emissions trading has become the instrument of choice to help manage the cost of this transition, whether used at international or at domestic level. Act Locally, Trade Globally, offers an overview of existing trading systems, their mechanisms, and looks into the future of the instrument for limiting greenhouse gas emissions. Are current markets likely to be as efficient as the theory predicts? What is, if any, the role of governments in these markets? Can domestic emissions trading systems be broadened to activities other than large stationary energy uses? Can international emissions trading accommodate potentially diverse types of emissions targets and widely different energy realities across countries? Are there hurdles to linking emissions trading systems based on various design features? Can emissions trading carry the entire burden of climate policy, or will other policy instruments remain necessary? In answering these questions, Act Locally, Trade Globally seeks to provide a complete picture of the future role of emissions trading in climate policy and the energy sector.

  9. Trade policy and public health.

    Science.gov (United States)

    Friel, Sharon; Hattersley, Libby; Townsend, Ruth

    2015-03-18

    Twenty-first-century trade policy is complex and affects society and population health in direct and indirect ways. Without doubt, trade policy influences the distribution of power, money, and resources between and within countries, which in turn affects the natural environment; people's daily living conditions; and the local availability, quality, affordability, and desirability of products (e.g., food, tobacco, alcohol, and health care); it also affects individuals' enjoyment of the highest attainable standard of health. In this article, we provide an overview of the modern global trade environment, illustrate the pathways between trade and health, and explore the emerging twenty-first-century trade policy landscape and its implications for health and health equity. We conclude with a call for more interdisciplinary research that embraces complexity theory and systems science as well as the political economy of health and that includes monitoring and evaluation of the impact of trade agreements on health.

  10. The continental free trade area

    DEFF Research Database (Denmark)

    Sandrey, Ron; Jensen, Hans Grinsted

    The Trade Law Centre (tralac) has recently capitalised upon the prerelease Version 9.2 of the Global Trade Analysis Project (GTAP) database and the recent excellent data sets from the World Bank and other publishing quality data on trade barriers across the African continent. It undertook a series...... of simulations examining regional integration and intra-African trade barrier reductions. The results for tariff elimination on intra-African trade are promising. But the real news is in confirming that these barriers are not as significant as the various trade-related barriers except for tariffs. Especially...... impressive results were forecast by simulating a modest 20% reduction in the costs associated with the particular African problem of transit time delays at customs, terminals and internal land transportation. These gains are significantly above both just intraAfrican tariff elimination and what may...

  11. Trade, investment and the environment

    International Nuclear Information System (INIS)

    Ward, H.; Brack, D.

    2000-01-01

    As liberalisation of global trade and investment accelerates, what happens to the environment? As the world heads for confrontation in Seattle, the questions intensify. Does foreign direct investment mean forsaking environmental protection? Or do multinational corporations export higher standards when they invest abroad? Can a powerful trading nation ban imports of tropical timber produced unsustainably? Should the World Trade Organisation take the views of industry or environmental groups into account when deciding? Must world trade rules be changed to accommodate environmental concerns? This book analyzes key issues in this increasingly controversial arena and includes contributions from Renato Ruggiero, former Director General of the World Trade Organization; The Rt Hon Brian Wilson MP, former UK Minister of Trade; Dr Magda Shahin, Deputy Assistant Minister of Foreign Affairs at the Egyptian Ministry of Foreign Affairs; Pradeep Mehta, Secretary General, Consumer Unity and Trust Society, India; and Dr Michel Potier, Head of the Economics Division at the OECD's Environment Directorate. (Author)

  12. International biodiesel markets. Developments in production and trade

    Energy Technology Data Exchange (ETDEWEB)

    Lamers, P. [Ecofys Germany, Berlin (Germany)

    2012-01-15

    The global biodiesel market has shown an exponential growth in production and trade across the past decade. Nowadays, more biodiesel than ever before is sourced from abroad and procurement areas - especially of large scale producers and traders - span the globe. While this trend is bound to continue, markets and trade developments are still strongly linked to support and trade policies. Furthermore, the biodiesel industry is strongly linked to other sectors (agriculture and mineral oil industry in particular) and faces significant market disturbances some of which have led to various inefficiencies in the past. Due to the pace of this market development, a methodological assessment and understanding of the numerous influencing factors was needed to reduce uncertainties and risks for those involved. A recently published analysis by Ecofys and the Copernicus Institute, Utrecht University, provided such an analysis. It evaluates how the interaction of domestic policies steered global trade streams towards different markets, in particular in connection to underlying trade policies and additional market forces, over the past decade. It provides robust data on international production and trade volumes which have already served as input to the recently published Special Report on Renewable Energy (SRREN) by the Intergovernmental Panel on Climate Change (IPCC). This market brochure was commissioned by UFOP to build upon the methodologies and findings of Lamers et al. and to provide a picture of the global biodiesel market in 2010/2011. It is structured in six sections: an overview of global production volumes (Section 2); developments of EU (Section 3) and other world (Section 4) markets and (trade) policies; global net trade volumes (Section 5); vegetable oil trade patterns and their link to biodiesel trade (Section 6); Conclusions and Outlook (Section 7)

  13. Level of environmental threat posed by horticultural trade in Cactaceae.

    Science.gov (United States)

    Novoa, Ana; Le Roux, Johannes J; Richardson, David M; Wilson, John R U

    2017-10-01

    Ornamental horticulture has been identified as an important threat to plant biodiversity and is a major pathway for plant invasions worldwide. In this context, the family Cactaceae is particularly challenging because it is considered the fifth most threatened large taxonomic group in the world; several species are among the most widespread and damaging invasive species; and Cactaceae is one of the most popular horticultural plant groups. Based on the Convention on International Trade in Endangered Species of Wild Flora and Fauna and the 11 largest online auction sites selling cacti, we documented the international cactus trade. To provide an in-depth look at the dynamics of the industry, we surveyed the businesses involved in the cactus trade in South Africa (a hotspot of cactus trade and invasions). We purchased seeds of every available species and used DNA barcoding to identify species to the genus level. Although <20% of this trade involved threatened species and <3% involved known invasive species, many species were identified by a common name. However, only 0.02% of the globally traded cacti were collected from wild populations. Despite a large commercial network, all South African imports (of which 15% and 1.5% were of species listed as threatened and invasive, respectively) came from the same source. With DNA barcoding, we identified 24% of the species to genus level. Based on our results, we believe that if trade restrictions are placed on the small proportion of cacti that are invasive and there is no major increase in harvesting of native populations, then the commercial trade in cactus poses a negligible environmental threat. However, there are currently no effective methods for easily identifying which cacti are traded, and both the illicit harvesting of cacti from the wild and the informal trade in invasive taxa pose on-going conservation challenges. © 2017 Society for Conservation Biology.

  14. Melting ice, growing trade?

    Directory of Open Access Journals (Sweden)

    Sami Bensassi

    2016-05-01

    Full Text Available Abstract Large reductions in Arctic sea ice, most notably in summer, coupled with growing interest in Arctic shipping and resource exploitation have renewed interest in the economic potential of the Northern Sea Route (NSR. Two key constraints on the future viability of the NSR pertain to bathymetry and the future evolution of the sea ice cover. Climate model projections of future sea ice conditions throughout the rest of the century suggest that even under the most “aggressive” emission scenario, increases in international trade between Europe and Asia will be very low. The large inter-annual variability of weather and sea ice conditions in the route, the Russian toll imposed for transiting the NSR, together with high insurance costs and scarce loading/unloading opportunities, limit the use of the NSR. We show that even if these obstacles are removed, the duration of the opening of the NSR over the course of the century is not long enough to offer a consequent boost to international trade at the macroeconomic level.

  15. Emissions trading stalls

    International Nuclear Information System (INIS)

    Milne, R.

    1998-01-01

    A brief article examines prospects for emission trading of greenhouse gas emissions in the UK. Topics covered include a checklist of principles for any trading system, plans for oil companies to do it internally, the possibility for carbon sinks as well as emissions and developments around the world. (UK) alt. Directly northward of the Sigsbee Escarpment, there is a relatively thin, low-velocity zone known as a ''gumbo zone''. Here two other pressure compartments are proposed. The origin of them is two-fold. First, initial sedimentation consists of pelagic clay draped over oceanic and transitional crust. Later, as the continental margin progrades nearer sedimentation becomes hemipelagic and coarser as gravity-driven sediments predominate. Secondly, as the salt wedge overrides a given spot of the basement, it is possible to develop a shear couple between the migrating salt and the stationary basement. The resultant shear (the site of the next strike-slip fault) may change pressures beneath the salt such that the shear may create two pressure compartments. The differences between the two compartments may be accentuated by lithologic changes caused by depositional mechanisms. (author)

  16. Fair trade international surrogacy.

    Science.gov (United States)

    Humbyrd, Casey

    2009-12-01

    Since the development of assisted reproductive technologies, infertile individuals have crossed borders to obtain treatments unavailable or unaffordable in their own country. Recent media coverage has focused on the outsourcing of surrogacy to developing countries, where the cost for surrogacy is significantly less than the equivalent cost in a more developed country. This paper discusses the ethical arguments against international surrogacy. The major opposition viewpoints can be broadly divided into arguments about welfare, commodification and exploitation. It is argued that the only valid objection to international surrogacy is that surrogate mothers may be exploited by being given too little compensation. However, the possibility of exploitation is a weak argument for prohibition, as employment alternatives for potential surrogate mothers may be more exploitative or more harmful than surrogacy. It is concluded that international surrogacy must be regulated, and the proposed regulatory mechanism is termed Fair Trade Surrogacy. The guidelines of Fair Trade Surrogacy focus on minimizing potential harms to all parties and ensuring fair compensation for surrogate mothers.

  17. Currency union entries and trade

    OpenAIRE

    Nitsch, Volker

    2005-01-01

    Recent research suggests that adopting a common currency increases bilateral trade. In this paper, I explore experiences of currency union entry in the post-war period and find no effect on trade. Previous results derived from a large panel data set (covering more than 200 countries from 1948 through 1997) appear to depend crucially on the assumption of symmetry between currency union exits and entries: While countries leaving a currency union experience significant declines in trade, currenc...

  18. Trade Liberalization and Pollution Havens

    OpenAIRE

    Josh Ederington; Arik Levinson; Jenny Minier

    2004-01-01

    U.S. Presidential Executive Order 13141 commits the United States to a careful assessment and consideration of the environmental impacts of trade agreements.' The most direct mechanism through which trade liberalization would affect environmental quality in the U.S. is through changes in the composition of industries. Freer trade means greater specialization, increasing the concentration of polluting industries in some countries and decreasing it in others. Indeed, in this paper we predict a ...

  19. Trade Liberalization and Pollution Havens

    OpenAIRE

    Josh Ederington, Arik Levinson, and Jenny Minier

    2004-01-01

    U.S. Presidential Executive Order 13141 commits the United States to a "careful assessment and consideration of the environmental impacts of trade agreements." The most direct mechanism through which trade liberalization would affect environmental quality in the U.S. is through changes in the composition of industries. Freer trade means greater specialization, increasing the concentration of polluting industries in some countries and decreasing it in others. Indeed, in this paper we predict a...

  20. International climate policy and trade

    International Nuclear Information System (INIS)

    Kuik, O.

    2000-01-01

    If a country takes steps to counter the greenhouse effect, it could influence the country's foreign trade. If a large group of countries consider such measures, e.g. the signatories to the Kyoto Protocol, that could possibly have major consequences for global trading patterns. How will the measures work out for countries, industries, and climate policy itself? Can countries mitigate any negative consequences for their trade balance? The results of a study to answer those questions are discussed

  1. Understanding the conventional arms trade

    Science.gov (United States)

    Stohl, Rachel

    2017-11-01

    The global conventional arms trade is worth tens of billions of dollars every year and is engaged in by every country in the world. Yet, it is often difficult to control the legal trade in conventional arms and there is a thriving illicit market, willing to arm unscrupulous regimes and nefarious non-state actors. This chapter examines the international conventional arms trade, the range of tools that have been used to control it, and challenges to these international regimes.

  2. Fraud risks in emissions trading

    International Nuclear Information System (INIS)

    2010-09-01

    The system of emission trading is a complex composed entity with on the one hand a strong environmental component and on the other hand a financial world that hooked on this instrument. In chapter 2 an introduction is provided to the emission trading system. The subsequent chapters elaborate Types of Fraud (Chapter 3), Powers (Chapter 4), and Instruments (Chapter 5). The report shows that various forms of fraud are occurring in emission trading, such as VAT fraud and identity theft. [nl

  3. Harmonic Patterns in Forex Trading

    OpenAIRE

    Nemček, Sebastian

    2013-01-01

    This diploma thesis is committed to examination of validity of Harmonic Patterns in Forex trading. Scott Carney described existing and introduced new Harmonic Patterns in 1999 in his book Harmonic Trader. These patterns use the Fibonacci principle to analyze price action and to provide both bullish and bearish trading signals. The goal of this thesis is to find out whether harmonic trading strategy on selected pairs is profitable in FX market, which patterns are the most profitable and what i...

  4. Measuring the Information Content of Stock Trades.

    OpenAIRE

    Hasbrouck, Joel

    1991-01-01

    This paper suggests that the interactions of security trades and quote revisions be modeled as a vector autoregressive system. Within this framework, a trade's information effect may be meaningfully measured as the ultimate price impact of the trade innovation. Estimates for a sample of NYSE issues suggest a trade's full price impact arrives only with a protracted lag; the impact is a positive and concave function of the trade size; large trades cause the spread to widen; trades occurring in ...

  5. Alternative trading systems in Poland

    Directory of Open Access Journals (Sweden)

    Magdalena Mosionek-Schweda

    2009-12-01

    Full Text Available The first Polish alternative trading system – called NewConnect – was opened on 30 August 2007. It has the status of an organized market, but it is operated by the Warsaw Stock Exchange outside the regulated market. Two years later, on 30 September 2009, the WSE launched another market – Catalyst – which consists of four segments including: two regular markets and two alternative trading platforms. The present paper aims to describe fundamental rules of the Polish alternative trading platforms as well as to depict a short overview of their trading indicators and basic statistics.

  6. Biclustering Learning of Trading Rules.

    Science.gov (United States)

    Huang, Qinghua; Wang, Ting; Tao, Dacheng; Li, Xuelong

    2015-10-01

    Technical analysis with numerous indicators and patterns has been regarded as important evidence for making trading decisions in financial markets. However, it is extremely difficult for investors to find useful trading rules based on numerous technical indicators. This paper innovatively proposes the use of biclustering mining to discover effective technical trading patterns that contain a combination of indicators from historical financial data series. This is the first attempt to use biclustering algorithm on trading data. The mined patterns are regarded as trading rules and can be classified as three trading actions (i.e., the buy, the sell, and no-action signals) with respect to the maximum support. A modified K nearest neighborhood ( K -NN) method is applied to classification of trading days in the testing period. The proposed method [called biclustering algorithm and the K nearest neighbor (BIC- K -NN)] was implemented on four historical datasets and the average performance was compared with the conventional buy-and-hold strategy and three previously reported intelligent trading systems. Experimental results demonstrate that the proposed trading system outperforms its counterparts and will be useful for investment in various financial markets.

  7. Canadian municipal carbon trading primer

    International Nuclear Information System (INIS)

    Seskus, A.

    2002-01-01

    The trading of greenhouse gas (GHG) emissions is being suggested as an effective economic way to meet Canada's Kyoto target. Emissions trading is a market-based instrument that can help achieve environmental improvements while using the market to absorb the economical and effective measures to achieve emissions reductions. Placing a value on emissions means that in order to minimize costs, companies will be motivated to apply the lowest-cost emission reductions possible for regulatory approval. The two main types of emissions trading that exist in Canada are the trading of emissions that lead to the formation of smog or acid rain, and the trading of greenhouse gas emissions that lead to climate change. Since carbon dioxide is the most prevalent GHG, making up approximately 75 per cent of Canadian GHG emissions, the trading of units of GHGs is often referred to as carbon trading. The impact that emissions trading will have on municipal operations was the focus of this primer. The trading of GHG involves buying and selling of allowances of GHGs between contracting parties, usually between one party that is short of GHG credits and another that has excess credits. The 3 common approaches to emissions trading include allowance trading (cap and trade), credit trading (baseline and credit), and a hybrid system which combines both credit and allowance trading systems. The issues that impact municipalities include the debate regarding who owns the credits from landfills, particularly if power is generated using landfill gas and the power is sold as green power. Other viable questions were also addressed, including who can claim emission reduction credits if a city implements energy efficiency projects, or fuel substitution programs. Also, will municipalities be allowed to trade internationally, for example, with municipalities in the United States, and how should they spend their money earned from selling credits. This report also presents highlights from 3 emissions

  8. Greenhouse gas trading starts up

    Science.gov (United States)

    Showstack, Randy

    While nations decide on whether to sign on to the Kyoto Protocol on climate change, some countries and private companies are moving forward with greenhouse gas emissions trading.A 19 March report, "The Emerging International Greenhouse Gas Market," by the Pew Center on Global Climate Change, reports that about 65 greenhouse gas emissions trades for quantities above 1,000 metric tons of carbon dioxideequivalent already have occurred worldwide since 1996. Many of these trades have taken place under a voluntary, ad hoc framework, though the United Kingdom and Denmark have established their own domestic emissions trading programs.

  9. Methodological aspects on international biofuels trade: International streams and trade of solid and liquid biofuels in Finland

    International Nuclear Information System (INIS)

    Heinimoe, J.

    2008-01-01

    The use of biomass for fuel is increasing in industrialised countries. Rapidly developing biomass markets for energy purposes along with weak information on biofuels trade that statistics offer have been incentives for several recently published studies investigating the status of biofuels trade. The comparison of the studies is often challenging due particularly to the various approaches to the indirect trade of biofuels and the diverse data sources utilised. The purpose of this study was to provide an overview of the Finnish situation with respect to the status of the streams of international biofuels trade. Parallel to this, the study aimed to identify methodological and statistical challenges in observing international biofuels trade. The study analysed available statistical information and introduced a procedure to obtain a clear overview on import and export streams of biofuels. In Finland, the total direct import and export of biofuels, being mainly composed of wood pellets and tall oil, is tiny in comparison with the total consumption of biofuels. Instead, the indirect trade has remarkable importance. Large import volumes of industrial raw wood make Finland a net importer of biofuels. In 2004, approximately 22% (64 PJ) of wood-based energy in Finland originated from imported wood. The study showed that the indirect trade of biofuels may be a significant sector of global biofuels trade. In the case of Finland, a comprehensive compilation of statistics on energy and forestry enabled the determination of the trade status satisfactory. However, national and international statistics should be further developed to take better into consideration international trade and to support continuously developing biofuels markets. (author)

  10. World Trade Organisation (WTO): Trade rules/agreements and ...

    African Journals Online (AJOL)

    The GATT (General Agreement on Trade and Tariffs) rules of 1947 were seen as prejudicial to the economic and development concerns of developing countries. With the coming into effect of World Trade Organization (WTO), it was expected that some of the concerns of the developing countries will be addressed.

  11. The cold neutron source in DR 3

    International Nuclear Information System (INIS)

    Jensen, K.; Leth, j.A.

    1980-09-01

    A description of the cold neutron source in DR 3 is given. The moderator of the cold neutron source is supercritical hydrogen at about 30degK and 15 bar abs. The necessary cooling capacity is supplied by two Philips Stirling B20 cryogenerators. The hydrogen is circulated between the cryogenerators and the in-pile moderator chamber by small fans. The safety of the facility is based on the use of triple containment preventing contact between hydrogen and air. The triple containment is achieved by enclosing the high vacuum system, surrounging the hydrogen system, in a helium blanket. The achieved spectrum of the thermal neutron flux and the gain factor are given as well as the experience from more than 5 years of operation. Finally some work on extension of the facility to operate two cold sources is reported. (author)

  12. Multidisciplinary studies of wildlife trade in primates: Challenges and priorities.

    Science.gov (United States)

    Blair, Mary E; Le, Minh D; Sterling, Eleanor J

    2017-11-01

    Wildlife trade is increasingly recognized as an unsustainable threat to primate populations and informing its management is a growing focus and application of primatological research. However, management policies based on ecological research alone cannot address complex socioeconomic or cultural contexts as drivers of wildlife trade. Multidisciplinary research is required to understand trade complexity and identify sustainable management strategies. Here, we define multidisciplinary research as research that combines more than one academic discipline, and highlight how the articles in this issue combine methods and approaches to fill key gaps and offer a more comprehensive understanding of underlying drivers of wildlife trade including consumer demand, enforcement patterns, source population status, and accessibility of targeted species. These articles also focus on how these drivers interact at different scales, how trade patterns relate to ethics, and the potential effectiveness of different policy interventions in reducing wildlife trade. We propose priorities for future research on primate trade including expanding from multidisciplinary to interdisciplinary research questions and approaches co-created by research teams that integrate across different disciplines such as cultural anthropology, ecology, economics, and public policy. We also discuss challenges that limit the integration of information across disciplines to meet these priorities. © 2017 Wiley Periodicals, Inc.

  13. Species Adulteration in the Herbal Trade: Causes, Consequences and Mitigation.

    Science.gov (United States)

    Srirama, Ramanujam; Santhosh Kumar, J U; Seethapathy, G S; Newmaster, Steven G; Ragupathy, S; Ganeshaiah, K N; Uma Shaanker, R; Ravikanth, Gudasalamani

    2017-08-01

    The global economy of the international trade of herbal products has been increasing by 15% annually, with the raw material for most herbal products being sourced from South and Southeast Asian countries. In India, of the 8000 species of medicinal plants harvested from the wild, approximately 960 are in the active trade. With increasing international trade in herbal medicinal products, there is also increasing concern about the widespread adulteration and species admixtures in the raw herbal trade. The adverse consequences of such species adulteration on the health and safety of consumers have only recently begun to be recognised and documented. We provide a comprehensive review of the nature and magnitude of species adulteration in the raw herbal trade, and identify the underlying drivers that might lead to such adulteration. We also discuss the possible biological and chemical equivalence of species that are used as adulterants and substitutes, and the consequences thereof to consumer health and safety, and propose a framework for the development of a herbal trade authentication service that can help regulate the herbal trade market.

  14. World trade in forest products and wood fuel

    International Nuclear Information System (INIS)

    Hillring, Bengt

    2006-01-01

    Wood fuel is a strategic resource for future energy supply and is usually utilised locally. Traditional use of wood fuel and other bioenergy has a share of 10-15% energy supply, used mainly for the household sector. The utilisation for industrial purposes is much smaller but is a strategic resource in the effort to fulfil the Kyoto agreement to replace fossil fuels and to mitigate greenhouse gas emissions. Many industrialised countries already use a significant share of biofuels in their energy supply e.g. Nordic countries while others like some other European Union countries are planning to increase their use. Production and use of biofuels need to be carried out sustainable. Official statistics do not report trade in such detail that international trade in different biomass types can be fully identified. However, FAO and European Forestry Institute are important sources. In some countries, there is a growing interest in the international trade, because the trade can provide biofuels at lower prices, larger quantities and better quality than domestic alternatives. The first signs of an international market price for wood fuel are indicated in Europe. For the future both the use and the trade of wood fuel is expected to increase. Analyses for trade in charcoal, wood chips, fuel wood and wood residues made in this report identify 'hot' trade spots in Europe, in south East Asia and in North America

  15. Vulnerability to shocks in the global seafood trade network

    Science.gov (United States)

    Gephart, Jessica A.; Rovenskaya, Elena; Dieckmann, Ulf; Pace, Michael L.; Brännström, Åke

    2016-03-01

    Trade can allow countries to overcome local or regional losses (shocks) to their food supply, but reliance on international food trade also exposes countries to risks from external perturbations. Countries that are nutritionally or economically dependent on international trade of a commodity may be adversely affected by such shocks. While exposure to shocks has been studied in financial markets, communication networks, and some infrastructure systems, it has received less attention in food-trade networks. Here, we develop a forward shock-propagation model to quantify how trade flows are redistributed under a range of shock scenarios and assess the food-security outcomes by comparing changes in national fish supplies to indices of each country’s nutritional fish dependency. Shock propagation and distribution among regions are modeled on a network of historical bilateral seafood trade data from UN Comtrade using 205 reporting territories grouped into 18 regions. In our model exposure to shocks increases with total imports and the number of import partners. We find that Central and West Africa are the most vulnerable to shocks, with their vulnerability increasing when a willingness-to-pay proxy is included. These findings suggest that countries can reduce their overall vulnerability to shocks by reducing reliance on imports and diversifying food sources. As international seafood trade grows, identifying these types of potential risks and vulnerabilities is important to build a more resilient food system.

  16. International trade law perspectives on paperless trade and inclusive digital trade

    OpenAIRE

    Mitchell, Andrew D.; Mishra, Neha

    2017-01-01

    Cross-border paperless trade is increasingly important to generate economic gains in a digitalised economy. Several developing and least developed countries will need to modernise their domestic laws and regulations to facilitate cross-border electronic transmissions, particularly to promote cloud computing and electronic payments. In recent trade agreements, trading partners have committed to deeper and more comprehensive provisions on electronic commerce, including adopting domestic laws on...

  17. Algorithm for in-pile field monitoring using conditional dividing of detectors into training and control ones

    International Nuclear Information System (INIS)

    Goryunov, V.K.; Tukhvetov, F.T.

    1989-01-01

    Heuristic solution of the problem of reliability parameter evaluation of two information sources-physical calculation and measurements - in reactor control systems is suggested. The approach described presupposes that the existing control systems of power release fields in reactors located at regular intervals over the core. It is suggested that the detectors should be subdivided into the training (by which correction with different values of reliability parameters is made) and control onesd (those, by which appropriate values of parameters are compared and selected). The algorithm considered is realized at the BIlibin heat and power generating nuclear plant and is succesfully used. 7 refs.; 5 refs.; 1 tab

  18. On financial markets trading

    Science.gov (United States)

    Matassini, Lorenzo; Franci, Fabio

    2001-01-01

    Starting from the observation of the real trading activity, we propose a model of a stockmarket simulating all the typical phases taking place in a stock exchange. We show that there is no need of several classes of agents once one has introduced realistic constraints in order to confine money, time, gain and loss within an appropriate range. The main ingredients are local and global coupling, randomness, Zipf distribution of resources and price formation when inserting an order. The simulation starts with the initial public offer and comprises the broadcasting of news/advertisements and the building of the book, where all the selling and buying orders are stored. The model is able to reproduce fat tails and clustered volatility, the two most significant characteristics of a real stockmarket, being driven by very intuitive parameters.

  19. e-Trading

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    PetroCosm is a B2B online exchange for the oil and gas industry. It links buyers and sellers to service providers in real-time product and service trading across the supply chain. It can facilitate the transfer of equipment and services for oil and gas companies around the world. This paper referred to the value-creation opportunities associated with electronically transforming oil and gas companies. Traditional businesses that use Internet technology extensively can shift their strategic perspective to an e-business perspective where the need for capital is minimized and more focus can be placed on productivity, creating a more efficient and dynamic company with potential for long-term competitive advantages. Many oil companies have moved forward with implementing the needed technology and management infrastructure for e-business. 10 figs.

  20. Trade in industry

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    In this report the Government has provided information on recent trends in Australia's energy trade and examined the implications of recent changes in those trends for the remainder of the 1980's. The opportunities for Australia as an energy exporter in the years ahead have been identified, along with related policy issues. The Committee has concluded that energy export projections made as recently as two years ago which foreshadowed massive increases in exports of coal, gas and uranium from Australia over the next couple of decades must now be considered excessively optimistic, given slack world economic conditions and the softer trend in world oil prices. The Committee has, however, cautioned against becoming too gloomy and of taking the immediate past period as a basis for projecting the longer term.

  1. e-Trading

    International Nuclear Information System (INIS)

    2001-01-01

    PetroCosm is a B2B online exchange for the oil and gas industry. It links buyers and sellers to service providers in real-time product and service trading across the supply chain. It can facilitate the transfer of equipment and services for oil and gas companies around the world. This paper referred to the value-creation opportunities associated with electronically transforming oil and gas companies. Traditional businesses that use Internet technology extensively can shift their strategic perspective to an e-business perspective where the need for capital is minimized and more focus can be placed on productivity, creating a more efficient and dynamic company with potential for long-term competitive advantages. Many oil companies have moved forward with implementing the needed technology and management infrastructure for e-business. 10 figs

  2. Trade costs in empirical New Economic Geography

    NARCIS (Netherlands)

    Bosker, E.M.; Garretsen, J.H.

    Trade costs are a crucial element of New Economic Geography (NEG) models. Without trade costs there is no role for geography. In empirical NEG studies the unavailability of direct trade cost data calls for the need to approximate these trade costs by introducing a trade cost function. In doing so,

  3. 40 CFR 90.206 - Trading.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Trading. 90.206 Section 90.206... Trading Provisions § 90.206 Trading. (a) An engine manufacturer may exchange emission credits with other engine manufacturers in trading, subject to the trading restriction specified in § 90.207(c)(2). (b...

  4. Development in Children's Thinking about International Trade.

    Science.gov (United States)

    Schug, Mark C.; Lephardt, Noreen

    1992-01-01

    Presents study results of how children reason about international trade. Explains that open ended questions were posed to students in grades 1-11 asking why nations trade, the benefits of trade, and their understanding of barriers to trade. Concludes that teaching fundamentals of international trade can be introduced as early as grade six. (DK)

  5. Factors of trade in Europe

    Czech Academy of Sciences Publication Activity Database

    Hanousek, Jan; Kočenda, Evžen

    2014-01-01

    Roč. 38, č. 4 (2014), s. 518-535 ISSN 0939-3625 R&D Projects: GA ČR(CZ) GAP403/12/0080 Grant - others:UK(CZ) UNCE 204005/2012 Institutional support: PRVOUK-P23 Keywords : bilateral trade * factors of trade * panel data Subject RIV: AH - Economics Impact factor: 0.649, year: 2014

  6. How insiders traded before rules

    NARCIS (Netherlands)

    Braggion, F.; Moore, L.

    2013-01-01

    UK company insiders, such as directors, were legally allowed to trade in the shares of their own companies up until the Companies Act of 1980. This article investigates the trading behaviour of directors over the period 1890 to 1909 in the UK. It finds relatively few instances of directors who

  7. The Characteristics of Informed Trading

    DEFF Research Database (Denmark)

    Aslan, Hadiye; Easley, David; Hvidkjær, Søren

    2011-01-01

    This paper investigates the linkage of microstructure, accounting, and asset pricing. We determine the relationship between firm characteristics as captured by accounting and market data and a firm's probability of private information-based trade (PIN) as estimated from trade data. This allows us...

  8. Improving U.S. Trade.

    Science.gov (United States)

    Bentsen, Lloyd

    1982-01-01

    Discusses the need to formulate a coherent trade policy in response to international economic realities. The author argues against a return to trade protectionism and supports efforts to establish workable reciprocity agreements. Increasing import tariffs on high technology products would control access to American markets. (AM)

  9. Trading strategies of corporate insiders

    NARCIS (Netherlands)

    Klein, O.; Maug, E.; Schneider, Christoph

    2017-01-01

    We test two complementary theories of optimal trading strategies by analyzing the transaction patterns of corporate insiders. According to information-based theories, investors trade faster if they compete with others for exploiting the same information, while liquidity-based theories predict the

  10. Human Factors in Financial Trading

    Science.gov (United States)

    Leaver, Meghan; Reader, Tom W.

    2016-01-01

    Objective This study tests the reliability of a system (FINANS) to collect and analyze incident reports in the financial trading domain and is guided by a human factors taxonomy used to describe error in the trading domain. Background Research indicates the utility of applying human factors theory to understand error in finance, yet empirical research is lacking. We report on the development of the first system for capturing and analyzing human factors–related issues in operational trading incidents. Method In the first study, 20 incidents are analyzed by an expert user group against a referent standard to establish the reliability of FINANS. In the second study, 750 incidents are analyzed using distribution, mean, pathway, and associative analysis to describe the data. Results Kappa scores indicate that categories within FINANS can be reliably used to identify and extract data on human factors–related problems underlying trading incidents. Approximately 1% of trades (n = 750) lead to an incident. Slip/lapse (61%), situation awareness (51%), and teamwork (40%) were found to be the most common problems underlying incidents. For the most serious incidents, problems in situation awareness and teamwork were most common. Conclusion We show that (a) experts in the trading domain can reliably and accurately code human factors in incidents, (b) 1% of trades incur error, and (c) poor teamwork skills and situation awareness underpin the most critical incidents. Application This research provides data crucial for ameliorating risk within financial trading organizations, with implications for regulation and policy. PMID:27142394

  11. Extension Resources for International Trade

    Science.gov (United States)

    Seal, Susan D.

    2016-01-01

    With the opening of additional trade partnerships, the reduction of global transportation and communication costs, and the increase in demand for U.S. agricultural products and services, international trade is an area of great importance to more and more Extension clients and stakeholders. This article provides information about the primary…

  12. Takeover bids and insider trading

    NARCIS (Netherlands)

    Nelemans, Matthijs; Bainbridge, Stephen M.

    2014-01-01

    This paper analyses the law and economics of insider trading in the context of takeover bids, focusing on the European regulatory framework. We distinguish between trading by the bidder, by the target and by classical insiders and first address the issue of precisely when information about potential

  13. Creative Trade for Human Development

    OpenAIRE

    Kabanda, Patrick

    2016-01-01

    In recent years, international trade in creative goods and services has been expanding. But this upward march is not lifting all boats. Although many developing countries are endowed with vast cultural wealth, they still lag behind. In addition, women are not faring well. Much needs to be done to expand creative trade for human development. Suggestions here include implementing a Women Art...

  14. Illegal trade in Barbary macaques

    NARCIS (Netherlands)

    van Uhm, Daan|info:eu-repo/dai/nl/380477025

    2014-01-01

    While Morocco is well known as the main port between Africa and the EU for the illegal drugs trade and migration, the illegal trade in wildlife is flourishing as well. Next to the illegal large-scale trafficking of tortoises and birds, it is estimated that as few as 5,000 Barbary macaques remain in

  15. Evaluating of foreign trade security

    OpenAIRE

    Vasyliev Andriy

    2015-01-01

    A method of evaluating foreign trade security is considered based on horizontally integrated approach to research security issues, taking into account the conditions of management, factors, components and levels of external security. The work was based theories of security, economics, management theory, practice of state regulation of foreign trade.

  16. Is Corruption Detrimental to Trade?

    NARCIS (Netherlands)

    Jong, E. de; Udo, E.

    2005-01-01

    Many regard corruption to be detrimental to international trade. Some, however, think that corruption greases commerce in case of low-quality institutions. Others argue that arbitrary corruption is more damaging to trade than predictable corruption. This is the first paper to test these hypotheses

  17. Does corruption discourage international trade?

    NARCIS (Netherlands)

    Jong, E. de; Bogmans, C.W.J.

    2011-01-01

    We use measures of trade-related corruption to investigate the effects of corruption on international trade and compare the results with those of corruption in general. We distinguish corruption in an exporting economy from that in an importing economy. Both distinctions appear to be important.

  18. Geographies of High Frequency Trading

    DEFF Research Database (Denmark)

    Grindsted, Thomas Skou

    2016-01-01

    This paper investigates the geographies of high frequency trading. Today shares shift hands within micro seconds, giving rise to a form of financial geographies termed algorithmic capitalism. This notion refers to the different spatio-temporalities produced by high frequency trading, under...... the valuation of time. As high frequency trading accelerates financial markets, the paper examines the spatio-temporalities of automated trading by the ways in which the speed of knowledge exploitation in financial markets is not only of interest, but also the expansion between different temporalities....... The paper demonstrates how the intensification of time-space compression produces radical new dynamics in the financial market and develops information rent in HFT as convertible to a time rent and a spatio-temporal rent. The final section discusses whether high frequency trading only responds to crises...

  19. European wood-fuel trade

    International Nuclear Information System (INIS)

    Hillring, B.; Vinterbaeck, J.

    2001-01-01

    This paper discusses research carried out during the l990s on European wood fuel trade at the Department of Forest Management and Products, SLU, in Sweden. Utilisation of wood-fuels and other biofuels increased very rapidly in some regions during that period. Biofuels are replacing fossil fuels which is an effective way to reduce the future influence of green house gases on the climate. The results indicate a rapid increase in wood-fuel trade in Europe from low levels and with a limited number of countries involved. The chief products traded are wood pellets, wood chips and recycled wood. The main trading countries are, for export, Germany and the Baltic states and, for import, Sweden, Denmark and to some extent the Netherlands. In the future, the increased use of biofuel in European countries is expected to intensify activity in this trade. (orig.)

  20. Effect of in-pile degradation of the meat thermal conductivity on the maximum temperature of the plate-type U-Mo dispersion fuels

    International Nuclear Information System (INIS)

    Medvedev, Pavel G.

    2009-01-01

    Effect of in-pile degradation of thermal conductivity on the maximum temperature of the plate-type research reactor fuels has been assessed using the steady-state heat conduction equation and assuming convection cooling. It was found that due to very low meat thickness, characteristic for this type of fuel, the effect of thermal conductivity degradation on the maximum fuel temperature is minor. For example, the fuel plate featuring 0.635 mm thick meat operating at heat flux of 600 W/cm2 would experience only a 20 C temperature rise if the meat thermal conductivity degrades from 0.8 W/cm-s to 0.3 W/cm-s. While degradation of meat thermal conductivity in dispersion-type U-Mo fuel can be very substantial due to formation of interaction layer between the particles and the matrix, and development of fission gas filled porosity, this simple analysis demonstrates that this phenomenon is unlikely to significantly affect the temperature-based safety margin of the fuel during normal operation.

  1. Thermal conductivity of Na3(U/sub 1-y/Pu/sub y/)O4: A preliminary in-pile determination

    International Nuclear Information System (INIS)

    Lee, M.J.; Lambert, J.D.B.; Ukai, S.; Odo, T.

    1987-01-01

    During Run-Beyond-Cladding-Breach (RBCB) operation in an oxide LMR, the performance of a breached fuel element is intimately associated with the formation of fuel-sodium reaction product (FSRP), Na 3 (U/sub 1-y/Pu/sub y/)O 4 . In-pile experiments coupled with destructive examinations of breached fuel have consistently revealed noticeable changes in fuel structure accompanying FSRP formation at the fuel surface. Previous analyses have also indicated a significant impact of FSRP on fuel centerline temperature. Successful modeling of breached fuel thermal behavior therefore requires a reasonably accurate knowledge of the thermal properties of the FSRP, especially its thermal conductivity. But laboratory investigations have been scarce and limited to the Na/UO 2 system because of the toxicity of plutonium and hygroscopicity of the FSRP. Hence, post-irradiation observations of fuel samples remain the most amenable way of deriving the thermal conductivity of the FSRP. Such work is a spin-off of the RBCB program in the Experimental Breeder Reactor-II (EBR-II), a program jointly sponsored by the US Department of Energy and the Power Reactor and Nuclear Fuel Development Corporation of Japan

  2. Simulation of the in-pile test Phebus-FPT3 using ASTEC V2 and ATHLET-CD 2.1A

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, Philipp; Koch, Marco K. [Bochum Univ. (Germany). Chair of Energy Systems and Energy Economics

    2011-07-01

    The Phebus-FPT programme, initiated in 1988 by the 'Institut de Radioprotection et de Surete Nucleaire' (IRSN) and the Joint Research Centre (JRC) of the European Commission (EC), was performed in the Phebus facility operated by 'Commissariat a'Energie Atomique' (CEA). The facility represent a 900 MWe Pressurized Water Reactor (PWR) scaled down by a factor 1:5000 which objective is to study fuel degradation and the subsequent release, transport and retention of fission products, structure, control rod and fuel materials, in case of a severe accident. The Phebus-FPT programme consists of integral in-pile tests, varying the fuel burn-up and geometry, the control rod nature, the thermal hydraulic conditions in the bundle and through the experimental circuit as well as in the containment. In primary, the integral experiments should outline a detailed description of the main phenomena of core degradation, fission product release and transport as well as radionuclide interactions. Due to that it is possible to analyse the physical and chemical processes due to a severe accident. With the ascertained data, an evaluation of the accident management measures could be made as well. A secondary aim of the Phebus tests was to enable model development and evaluation of severe accident codes such like ASTEC and ATHLET-CD. (orig.)

  3. In-pile testing of ITER first wall mock-ups at relevant thermal loading conditions in the LVR-15 nuclear research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kysela, Jan [Research Centre Rez, Hlavni 130, 250 68 Husinec-Rez (Czech Republic); Entler, Slavomir, E-mail: slavomir.entler@cvrez.cz [Research Centre Rez, Hlavni 130, 250 68 Husinec-Rez (Czech Republic); Vsolak, Rudolf; Klabik, Tomas [Research Centre Rez, Hlavni 130, 250 68 Husinec-Rez (Czech Republic); Zlamal, Ondrej [CEZ, Duhova 2/1444, 140 53 Praha 4 (Czech Republic); Bellin, Boris; Zacchia, Francesco [Fusion for Energy, Josep Pla, 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain)

    2015-10-15

    Highlights: • Irradiated thermal fatigue testing of the ITER primary first wall mock-ups. • Cyclic heat flux of 0.5 MW/m{sup 2} in the neutron field of the nuclear reactor core. • 17,040 thermal cycles. • Radiation damage in the range of 0.41–1.17 dpa depending on the material. - Abstract: The TW3 in-pile rig enabled the thermal fatigue testing of ITER primary first wall mock-ups in the core of the nuclear reactor. This experiment investigated the neutron irradiation influence on the design performance under high heat flux testing. A thermal flux of 0.5 MW/m{sup 2} in the neutron field of the core of the LVR-15 nuclear reactor was applied. Within the scope of the tests with simultaneous neutron irradiation, the TW3 rig reached a record of 17,040 thermal cycles with the radiation damage in the range of 0.41–1.17 dpa depending on the material. Even after a high number of thermal cycles, while being irradiated by neutrons, no damage of the tested mock-ups was visually observed. Further testing and analysis will follow in the Forschungszentrum Juelich.

  4. Pre-test prediction and post-test analysis of PWR fuel rod ballooning in the MT-3 in-pile LOCA simulation experiment in the NRU reactor

    International Nuclear Information System (INIS)

    Donaldson, A.T.; Horwood, R.A.; Healey, T.

    1983-01-01

    The USNRC and the UKAEA have jointly funded a series of in-pile LOCA simulation experiments in the Canadian NRU reactor in order to secure further information on the thermal hydraulic and clad deformation response of PWR fuel rod bundles. Test MT-3 in the series was performed using reflood rate and rod internal pressure conditions specified by the UK nuclear industry. The parameters were selected to ensure the development of a near-isothermal clad temperature history during which zircaloy was required to balloon and rupture near the alpha-alpha/beta phase transition. Specification of the reflood rate conditions was assisted by the performance of a precursor test on an unpressurised rod bundle and by complementary application of appropriate thermal hydraulic analyses. Identification of the rod internal pressure needed to cause ballooning and rupture was achieved using a creep deformation model, BALLOON, in conjunction with the clad thermal history defined by the prior thermal hydraulic test. This paper presents the basis of the BALLOON analysis and describes its application in calculating the fill gas pressure for rods MT-3, their axial ballooning profile and the clad temperature at peak radial strain elevations. (author)

  5. Results of water chemistry control in the in-pile ''Callisto'' loop (an experimental PWR rig installed in the BR2 reactor)

    International Nuclear Information System (INIS)

    Weber, M.; Benoit, P.; Dekeyser, J.; Verwimp, A.

    1994-01-01

    Since June 1992, a new experimental facility, called CALLISTO, is being irradiated in the BR2 materials testing reactor at Mol, Belgium. The main objective of the present test campaign is to study the behaviour of advanced fuel to high burn-up rates in a realistic PWR environment. Three in-pile sections, containing each 9 fuel rods, are loaded inside the reactor vessel and are connected to a common out-of-pile pressurized water circulation loop (ref.1). The later is branched-off into a purification circuit (feed-bleed concept) and further equipped with safety and auxiliary systems. To cope with the test programme, the equipments are designed so that the guidelines of a PWR primary water chemistry can be followed (ref.2). Real steady-state conditions cannot be observed because the typical BR2 cycle (3 weeks running/3 weeks shut-down) is much shorter and because the rig is cooled down during each reactor shut-down. The purpose of this poster is to provide results of chemical parameters recorded during the cycling behaviour of the CALLISTO primary water. (authors). 4 figs., 1 tab., 2 refs

  6. The trend toward free trade areas: economic consequences and policy implications for the United States

    OpenAIRE

    All, William H., IV

    1992-01-01

    Approved for public release; distribution is unlimited Because America's economy relies to a significant degree on export markets and external sources of raw materials, the health of the international trading system is critical to the national security of the United States. This thesis demonstrates that the organization on which America has relied for the management of the international trading system since the 1950s, the General Agreement on Tariffs and Trade (GATT), is failing to effect...

  7. A theoretical model of water and trade

    Science.gov (United States)

    Dang, Qian; Konar, Megan; Reimer, Jeffrey J.; Di Baldassarre, Giuliano; Lin, Xiaowen; Zeng, Ruijie

    2016-03-01

    Water is an essential input for agricultural production. Agriculture, in turn, is globalized through the trade of agricultural commodities. In this paper, we develop a theoretical model that emphasizes four tradeoffs involving water-use decision-making that are important yet not always considered in a consistent framework. One tradeoff focuses on competition for water among different economic sectors. A second tradeoff examines the possibility that certain types of agricultural investments can offset water use. A third tradeoff explores the possibility that the rest of the world can be a source of supply or demand for a country's water-using commodities. The fourth tradeoff concerns how variability in water supplies influences farmer decision-making. We show conditions under which trade liberalization affect water use. Two policy scenarios to reduce water use are evaluated. First, we derive a target tax that reduces water use without offsetting the gains from trade liberalization, although important tradeoffs exist between economic performance and resource use. Second, we show how subsidization of water-saving technologies can allow producers to use less water without reducing agricultural production, making such subsidization an indirect means of influencing water use decision-making. Finally, we outline conditions under which riskiness of water availability affects water use. These theoretical model results generate hypotheses that can be tested empirically in future work.

  8. Groundwater Depletion Embedded in International Food Trade

    Science.gov (United States)

    Dalin, Carole; Wada, Yoshihide; Kastner, Thomas; Puma, Michael J.

    2017-01-01

    Recent hydrological modeling and Earth observations have located and quantified alarming rates of groundwater depletion worldwide. This depletion is primarily due to water withdrawals for irrigation, but its connection with the main driver of irrigation, global food consumption, has not yet been explored. Here we show that approximately eleven per cent of non-renewable groundwater use for irrigation is embedded in international food trade, of which two-thirds are exported by Pakistan, the USA and India alone. Our quantification of groundwater depletion embedded in the world's food trade is based on a combination of global, crop-specific estimates of non-renewable groundwater abstraction and international food trade data. A vast majority of the world's population lives in countries sourcing nearly all their staple crop imports from partners who deplete groundwater to produce these crops, highlighting risks for global food and water security. Some countries, such as the USA, Mexico, Iran and China, are particularly exposed to these risks because they both produce and import food irrigated from rapidly depleting aquifers. Our results could help to improve the sustainability of global food production and groundwater resource management by identifying priority regions and agricultural products at risk as well as the end consumers of these products.

  9. Groundwater depletion embedded in international food trade

    Science.gov (United States)

    Dalin, Carole; Wada, Yoshihide; Kastner, Thomas; Puma, Michael J.

    2017-03-01

    Recent hydrological modelling and Earth observations have located and quantified alarming rates of groundwater depletion worldwide. This depletion is primarily due to water withdrawals for irrigation, but its connection with the main driver of irrigation, global food consumption, has not yet been explored. Here we show that approximately eleven per cent of non-renewable groundwater use for irrigation is embedded in international food trade, of which two-thirds are exported by Pakistan, the USA and India alone. Our quantification of groundwater depletion embedded in the world’s food trade is based on a combination of global, crop-specific estimates of non-renewable groundwater abstraction and international food trade data. A vast majority of the world’s population lives in countries sourcing nearly all their staple crop imports from partners who deplete groundwater to produce these crops, highlighting risks for global food and water security. Some countries, such as the USA, Mexico, Iran and China, are particularly exposed to these risks because they both produce and import food irrigated from rapidly depleting aquifers. Our results could help to improve the sustainability of global food production and groundwater resource management by identifying priority regions and agricultural products at risk as well as the end consumers of these products.

  10. Imported emissions. The world trade stowaway

    International Nuclear Information System (INIS)

    Fink, Meike; Gautier, Celia

    2013-05-01

    This study first gives an overview of existing tools and methodological challenges to account emissions included in consumed products fabricated elsewhere. It notably discusses the passage from a methodology based on a production principle to a methodology based on a consumption principle, outlines the different methodologies associated with the different analysis levels, and the importance of uncertainty sources. The second part proposes a view on emission flows included in exports and imports. It addresses the following issues: the international level, increasing importance of emissions transferred via world trade, emissions related to consumption per capita and per social class, carbon and energy intensity of products at the origin of emissions, composition of imported and exported products and intensity of their emissions, impact of a methodological change on greenhouse gas emissions by France, extent of emissions imported in France, and Germany as the first trade partner and emission importer of France. The third part discusses the political implications of an accounting of emissions related to consumption and to world trade

  11. Free trade or just trade? The world trade organisation, human rights ...

    African Journals Online (AJOL)

    The author critically examines the role of the World Trade Organisation (WTO). In recent years, it is noted, the organisation's agenda of trade liberalisation, its perceived lack of accountability and insensitivity to human rights have attracted intense criticism. It has been asserted that provisions of WTO agreements concerning ...

  12. Preferences, country bias, and international trade

    NARCIS (Netherlands)

    S. Roy (Santanu); J.M.A. Viaene (Jean-Marie)

    1998-01-01

    textabstractAnalyzes international trade where consumer preferences exhibit country bias. Why country biases arise; How trade can occur in the presence of country bias; Implication for the pattern of trade and specialization.

  13. 77 FR 25678 - International Trade Administration

    Science.gov (United States)

    2012-05-01

    ... DEPARTMENT OF COMMERCE International Trade Administration Antidumping or Countervailing Duty Order..., International Trade Administration, Department of Commerce. Background Every five years, pursuant to section 751...'') and the International Trade Commission automatically initiate and conduct a review to determine...

  14. Emissions trading in the Netherlands

    International Nuclear Information System (INIS)

    Zapfel, P.

    2002-01-01

    In the article 'Emissions trading in the Netherlands. The optimal route towards an international scheme?' (issue 1, 2002) Mulder asks the question to what extent a Dutch national CO2 trading scheme is a worthwhile effort toward an international trading scheme (i.e. is it a first step toward a European-wide emissions trading scheme) when presenting the proposal of the Dutch Commission on CO2 trade and related economic analysis. His conclusion, underlined by modeling results, is that a national scheme along the lines proposed by the Dutch Commission is an expensive policy instrument due to the high transaction costs. The first-best option according to Mulder is to impose CO2-emissions trading with an absolute ceiling on an international level. In the meantime, he states, improving the design of the energy tax system may be an efficient alternative. In this comment I would like to address two issues. First, does the approach proposed by the Dutch Commission make sense from a European perspective towards an EU-wide cap and trade allowance scheme as proposed by the European Commission in October 2001? and Second, what might this Dutch model and philosophy, scaled up to the EU level, look like?

  15. Statistics of foreign trade in radioactive materials 2004

    International Nuclear Information System (INIS)

    Anon.

    2006-01-01

    The German Federal Office for Industry and Foreign Trade Control (BAFA) keeps annual statistics of the imports and exports of radioactive materials, nuclear fuels included. The entries, some of them with precise details, cover the participating countries and the radionuclides concerned as well as all kinds of radioactive materials. The tables listed in the article represent the overall balance of the development of imports and exports of radioactive materials for the years 1986 to 2004 arranged by activity levels, including the development of nuclear fuel imports and exports. For the year 2004, an additional trade balance for irradiated and unirradiated nuclear fuels and source materials differentiated by enrichment is presented for the countries involved. In 2004, some 2,558 t of nuclear fuels and source materials were imported into the Federal Republic, while approx. 1,971 t were exported. The chief trading partners are countries of the European Union, Canada, Russia and the USA. (orig.)

  16. Statistics of foreign trade in radioactive materials 2002

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The German Federal Office for Industry and Foreign Trade Control (BAFA) keeps annual statistics of the imports and exports of radioactive materials, nuclear fuels included. The entries, some of them with precise details, cover the participating countries and the radionuclides concerned as well as all kinds of radioactive materials. The tables listed in the article represent the overall balance of the development of imports and exports of radioactive materials for the years 1983 to 2002 arranged by activity levels, including the development of nuclear fuel imports and exports. For the year 2002, an additional trade balance for irradiated and unirradiated nuclear fuels and source materials differentiated by enrichment is presented for the countries involved. In 2002, some 3 070 t of nuclear fuels and source materials were imported into the Federal Republic, while approx. 3 052 t were exported. The chief trading partners are countries of the European Union, Russia, and the USA. (orig.)

  17. Firm Based Trade Models and Turkish Economy

    Directory of Open Access Journals (Sweden)

    Nilüfer ARGIN

    2015-12-01

    Full Text Available Among all international trade models, only The Firm Based Trade Models explains firm’s action and behavior in the world trade. The Firm Based Trade Models focuses on the trade behavior of individual firms that actually make intra industry trade. Firm Based Trade Models can explain globalization process truly. These approaches include multinational cooperation, supply chain and outsourcing also. Our paper aims to explain and analyze Turkish export with Firm Based Trade Models’ context. We use UNCTAD data on exports by SITC Rev 3 categorization to explain total export and 255 products and calculate intensive-extensive margins of Turkish firms.

  18. Trade Adjustment Assistant: Experiences of Six Trade-Impacted Communities

    National Research Council Canada - National Science Library

    2001-01-01

    ... with lower-priced imports close or relocate to lower-wage countries abroad. The federal government recognizes that while the benefits of free trade are widely dispersed across the economy, the costs of worker dislocation effects are more localized...

  19. INSTITUTIONS, GOVERNANCE AND INTERNATIONAL TRADE

    Directory of Open Access Journals (Sweden)

    Henri L.F. de GROOT

    2005-01-01

    Full Text Available Ineffective institutions and bad governance increase transaction costs and reduce international transport flows. In this paper, we empirically investigate this basic notion, and we show that it can account for several, so far, somewhat puzzling results in the empirical literature estimating gravity equations of bilateral trade. More specifically, we show that differences in the quality and effectiveness of institutions offer an explanation for the tendency of OECD countries to trade disproportionately with each other, and with non-OECD countries, as well as for the positive effect of GDP per capita on bilateral trade.

  20. Measuring performance at trade shows

    DEFF Research Database (Denmark)

    Hansen, Kåre

    2004-01-01

    Trade shows is an increasingly important marketing activity to many companies, but current measures of trade show performance do not adequately capture dimensions important to exhibitors. Based on the marketing literature's outcome and behavior-based control system taxonomy, a model is built...... that captures a outcome-based sales dimension and four behavior-based dimensions (i.e. information-gathering, relationship building, image building, and motivation activities). A 16-item instrument is developed for assessing exhibitors perceptions of their trade show performance. The paper presents evidence...

  1. Trade Fairs, Markets and Fields

    DEFF Research Database (Denmark)

    Moeran, Brian

    2011-01-01

    This article describes how trade fairs act as a framing mechanism that enables participants to come together for the exchange of goods and services and to perceive themselves as acting in a social field. This way, trade fairs make markets possible. Based on ongoing participant observation at book....../material, social, situational, content/appreciative, and the use value of goods, values which are then equated with a commodity exchange value in the form of price. Trade fairs frame order, but they are also events where the respective field might be reconfigurated. The contingency of personal interaction...

  2. Cultural Effects of Trade Liberalization

    OpenAIRE

    Steven M. Suranovic; Robert Winthrop

    2005-01-01

    We incorporate culture into a standard trade model in two distinct ways. In the ¡°cultural affinity from work¡± model, workers receive a non- pecuniary cultural benefit from work in a particular industry. In the ¡°cultural externality¡± model, consumers of a product receive utility from other consumer¡¯s consumption of a domestic good. We show that resistance to change due to cultural concerns can reduce the national benefits from trade liberalization. Complete movements to free trade will ha...

  3. Greasing the Wheels of Trade

    OpenAIRE

    Hendrik P. van Dalen; Aico P. van Vuuren

    2003-01-01

    This discussion paper resulted in a publication in 'De Economist' , 2005, 153(2), 139-165. How much does a nation spend on resources to 'grease the wheels of trade'? To examine this question the Dutch economy is used as an exemplary case as the Netherlands are known as a nation of traders. This image was derived in the seventeenth century from successes in long distance trade, shipping and financial innovations. Despite its historical background in trading the potential to 'truck and barter' ...

  4. Analysis of obsidian from moho cay, belize: new evidence on classic maya trade routes.

    Science.gov (United States)

    Healy, P F; McKillop, H I; Walsh, B

    1984-07-27

    Trace element analysis of obsidian artifacts from Moho Cay, Belize, reveals that the obsidian derives primarily from the El Chayal outcrop in highland Guatemala and not from the Ixtepeque source. This is contrary to the widely accepted obsidian trade route model for Classic Maya civilization and suggests that Classic Maya obsidian trade was a more complex economic phenomenon than has been recognized.

  5. The determinants of trade credit use : the case of the Tanzanian rice market

    NARCIS (Netherlands)

    Hermes, Niels; Kihanga, Ernest; Lensink, Robert; Lutz, Clemens

    2015-01-01

    Most small businesses in the developing economies suffer from a lack of access to formal external finance. One important alternative source of finance for these entrepreneurs is trade credit. Applying a unique data-set containing data on specific trade relations between rice wholesalers and rice

  6. 40 CFR 60.4120 - General Hg budget trading program permit requirements.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false General Hg budget trading program... and Compliance Times for Coal-Fired Electric Steam Generating Units Permits § 60.4120 General Hg budget trading program permit requirements. (a) For each Hg Budget source required to have a title V...

  7. What's the Difference? - Comparing U.S. and Chinese Trade Data

    National Research Council Canada - National Science Library

    Martin, Michael F

    2007-01-01

    .... This comparison reveals that over two-thirds of the difference in the value of China's exports to the United States is attributable to five types of goods. The second approach to examining the differing trade data involves a review of the existing literature on the technical and non-technical sources of the trade data discrepancies. This report will not be updated.

  8. Trade credit use and competition in the value chain : Evidence from Vietnam

    NARCIS (Netherlands)

    Hermes, Niels; Lensink, Robert; Lutz, Clemens; Thu, Uyen Nguyen Lam

    2016-01-01

    Trade credit is a major source of finance in value chains in developed and emerging economies. Despite its ubiquitous use, this is one of the first empirical studies that analyzes why the use of trade credit varies along the value chain. We argue that competition faced by firms at different stages

  9. DEVELOPMENT STAGE OF RETAIL TRADE IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Catana Adina

    2012-07-01

    Full Text Available According to Karel De Gucht, Trade Commissioner from the European Commission, trade is working for Europe's economic recovery by ensuring growth and jobs. The European renewed trade strategy will open markets and connect Europe to the main sources and regis of global growth. The aim is to ensure that European business gets a fair deal and that countries’ rights are respected so that all can enjoy the benefits of trade. Thanks to the ease of modern transport and communications, it is now easier to produce, buy and sell goods around the world which gives European companies of every size the potential to trade outside Europe. This paper’s objective is to analyse the development stage of the European Union’s retail, and its member countries. The study is based on the research taken in the project of PhD research with the theme: The impacts of Economic Integration on Romanian Retail. For my research I used data from Eurostat, National Statistical Institute, European Union official website In the past 10 years, the volume of retail trade in EU member states has increased, but the extent of the changes varies substantially from one country to another.

  10. Emission trading in Europe with an exchange rate

    International Nuclear Information System (INIS)

    Klassen, G.A.J.; Amann, M.; Foersund, F.R.

    1994-01-01

    The analytical and empirical properties of a new method for emission trading according to a fixed exchange rate are explored. The exchange rate is based on the ratios of the marginal costs of abatement in the optimal solution in order to account for the impact of the location of emission sources on the deposition. It is shown that, generally, this system will not achieve the optimal solution and does not guarantee that environmental deposition constraints are not violated, although total abatement costs are always reduced. A routine was developed to mimic trading as a bilateral, sequential process, subject to an exchange rate. Use has been made of an adapted version of the optimization module in the RAINS (REgional Acidification INformation and Simulation) model. In the example used, results for SO 2 emissions in Europe show that, starting from a uniform reduction, exchange-rate trading achieves higher cost savings than one-to-one trading, without achieving the cost minimum. Sulfur deposition targets are not violated since the initial emission allocation overfulfilled targets at many places. The results are sensitive to: pre-trade emission levels, the transaction costs, the availability of information on potential cost savings and assumptions made on the behavior of trading partners. 6 figs., 3 tabs., 28 refs

  11. Trade Policy and Pro Poor Growth in Ghana | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    As in other sub-Saharan countries, small-scale subsistence farming constitutes the predominant source of livelihood in Ghana. This grant will allow the Institute of Statistical, Social and Economic Research (ISSER) at the University of Ghana to assess the linkages between international trade and poverty with special ...

  12. 40 CFR 350.7 - Substantiating claims of trade secrecy.

    Science.gov (United States)

    2010-07-01

    ... publications or other information sources available to the public or your competitors (of which you are aware... of the chemical claimed as trade secret and explain why it is a secret of interest to competitors... competitors could deduce this use from disclosure of the chemical identity together with other information on...

  13. Trade Liberalisation and Vertical Integration

    DEFF Research Database (Denmark)

    Bache, Peter Arendorf; Laugesen, Anders Rosenstand

    We build a three-country model of international trade in final goods and intermediate inputs and study the relation between four different types of trade liberalisation and vertical integration. Firms are heterogeneous with respect to both productivity and factor (headquarter) intensity. Final......-good producers face decisions on exporting, vertical integration of intermediate-input production, and whether the intermediate-input production should be offshored to a low-wage country. We find that the fractions of final-good producers that pursue either vertical integration, offshoring, or exporting are all...... increasing when intermediate-input trade or final-goods trade is liberalised. Finally, we provide guidance for testing the open-economy property rights theory of the firm using firm-level data and surprisingly show that the relationship between factor (headquarter) intensity and the likelihood of vertical...

  14. Environmental Regulation and International Trade

    Energy Technology Data Exchange (ETDEWEB)

    Mulatu, A. [London School of Economics, London (United Kingdom); Florax, R.J.G.M.; Withagen, C.A. [Faculty of Economics and Business Administration, Vrije Universiteit, Amsterdam (Netherlands)

    2004-07-01

    We empirically investigate the responsiveness of international trade to the stringency of environmental regulation. Stringent environmental regulation may impair the export competitiveness of 'dirty' domestic industries, and as a result, 'pollution havens' emerge in countries where environmental regulation is 'over-lax.' We examine the impact of pollution abatement and control costs on net exports in order to grasp this phenomenon. Theoretically, our analysis is related to a general equilibrium model of trade and pollution nesting the pollution haven motive for trade with the factor endowment motive. We analyze data on two-digit ISIC manufacturing industries during the period 1977-1992 in Germany, the Netherlands and the US, and show that trade patterns in 'dirty' commodities are jointly determined by relative factor endowments and environmental stringency differentials.

  15. Trade implications of environmental taxes

    International Nuclear Information System (INIS)

    Klepper, G.

    1994-01-01

    The general equilibrium impact of environmental taxes does not consist simply consist in a reduction of international trade. This rather depends on the particular circumstances in which the tax is imposed. The trade impacts of environmental regulation which have been measured empirically are almost negligable. Even simulation studies predict strong effects only for very few sectors of the economy. Since the environmental taxes are imposed in order to induce a reallocation of the economy away from the polluting towards the less polluting activities, one can not expect that the polluting industries will not need to shrink or need to introduce abatement measures. This internal reallocation will necessarily be accompanied by a restructuring of trade between economies. Hence, mitigating these trade effects is about as meaningful as mitigating the internal restructuring of the economy. (orig./UA)

  16. The impact of fair trade

    NARCIS (Netherlands)

    Ruben, R.

    2008-01-01

    Twenty years ago, Fair Trade started as an effort to enable smallholder producers from developing countries to successfully compete in international markets. Better access to market outlets and stable prices are considered key principles for sustainable poverty reduction and stakeholder

  17. Topics on electricity trade

    International Nuclear Information System (INIS)

    Skytte, K.

    2001-01-01

    The first chapter in this thesis is a survey of studies on electricity trade, which has been included in order to show how subjects in this thesis fit into this aspect of energy research. Transitions from centralised monopolies to liberalised electricity markets have been inaugurated in the northern European countries during the last decade. The backgrounds and speed of transitions differ within the countries. Where Norway liberalised its electricity market in order to stabilise the prices, EU urged a liberalisation in order to make the electricity supply industry more effective. Together with national liberalisation, the opening of the cross border trade between the countries is also urged. The first paper in this thesis describes those different liberalisation processes within northern Europe and discusses problems that may arise in a transition period for integrating the countries into a common electricity market with efficient cross-border competition. Before the liberalisation process started, the electricity generation was determined by a central load dispatch at known prices. The introduction of competition has necessitated the creation of new competitive markets, power exchanges and financial markets where generation and prices are determined by demand and supply on the markets. One implication of this is that investments in new plants shall be made under levels of uncertainty about future prices. The second paper in this thesis analyses the importance of introducing uncertainty in energy-economic modelling of the electricity supply sector. Another implication, which arises on introducing a new market structure and power exchanges, is that the design of the power exchanges influences the price setting on the markets. The third paper of this thesis analyses the price setting on the regulating power market on the Nordic power exchange Nord Pool. More precisely, the paper reveals the pattern of the prices on the regulating power market by analysing the cost of

  18. Topics on electricity trade

    Energy Technology Data Exchange (ETDEWEB)

    Skytte, K.

    2001-07-01

    The first chapter in this thesis is a survey of studies on electricity trade, which has been included in order to show how subjects in this thesis fit into this aspect of energy research. Transitions from centralised monopolies to liberalised electricity markets have been inaugurated in the northern European countries during the last decade. The backgrounds and speed of transitions differ within the countries. Where Norway liberalised its electricity market in order to stabilise the prices, EU urged a liberalisation in order to make the electricity supply industry more effective. Together with national liberalisation, the opening of the cross border trade between the countries is also urged. The first paper in this thesis describes those different liberalisation processes within northern Europe and discusses problems that may arise in a transition period for integrating the countries into a common electricity market with efficient cross-border competition. Before the liberalisation process started, the electricity generation was determined by a central load dispatch at known prices. The introduction of competition has necessitated the creation of new competitive markets, power exchanges and financial markets where generation and prices are determined by demand and supply on the markets. One implication of this is that investments in new plants shall be made under levels of uncertainty about future prices. The second paper in this thesis analyses the importance of introducing uncertainty in energy-economic modelling of the electricity supply sector. Another implication, which arises on introducing a new market structure and power exchanges, is that the design of the power exchanges influences the price setting on the markets. The third paper of this thesis analyses the price setting on the regulating power market on the Nordic power exchange Nord Pool. More precisely, the paper reveals the pattern of the prices on the regulating power market by analysing the cost of

  19. To Trade or Not to Trade: Firm-Level Analysis of Emissions Trading in Santiago, Chile

    International Nuclear Information System (INIS)

    Coria, Jessica; Loefgren, Aasa; Sterner, Thomas

    2009-01-01

    Whether tradable permits are appropriate for use in transition and developing economies - given special social and cultural circumstances, such as the lack of institutions and lack of expertise with market-based policies - is much debated. We conducted interviews and surveyed a sample of firms subject to emissions trading programs in Santiago, Chile, one of the first cities outside the OECD that has implemented such trading. The information gathered allow us to study what factors affect the performance of the trading programs in practice and the challenges and advantages of applying tradable permits in less developed countries

  20. Impact of Terms-of-Trade on Slovakia, the Czech Republic, and Croatia in the Short Run

    Directory of Open Access Journals (Sweden)

    Szomolányi Karol

    2017-03-01

    Full Text Available The terms-of-trade shocks are not main source of business cycles in three post-communist countries (i.e., Slovakia, the Czech Republic, and Croatia. The zero or negative reactions of the trade balance in terms-of-trade positive shocks in the countries exhibit the Obstfeld-Svensson-Razin effect, according to which the Harberger-Laursen-Metzler positive effect on terms-of-trade indicates that the smaller the trade balance, the more persistent the terms-of-trade shock is. The conclusions come from the structural vector autoregressive analysis of the cyclical components of terms-of-trade, trade balance, output, consumption, and investment in three post-communist countries.

  1. ASEAN - China Free Trade Area : A quantitative study of Trade diversion and Trade creation effects on ASEAN - China trade flows

    OpenAIRE

    Duong Xuan, Vinh

    2011-01-01

    The Association of South-East Asian Nations (ASEAN) and China have a long history of trading with each other. They are economic partners as well as competitors for many years. In order to push their economic relationship to a higher level, in November 2002, ASEAN and China signed the initial framework agreement, determined on establishing the ASEAN - China Free Trade Area (ACFTA) among the eleven countries by 2010 for the ASEAN-6 (Brunei, Indonesia, Malaysia, Philippines, Singapore, Thailand)...

  2. Trade Credit and Informational Asymmetry.

    OpenAIRE

    Smith, Janet Kiholm

    1987-01-01

    Commonly used trade credit terms implicitly define a high interest rate that operates as an efficient screening device where information about buyer default risk is asymmetrically held. By offering trade credit, a seller can identify prospective defaults more quickl y than if financial institutions were the sole providers of short-ter m financing. The information is valuable in cases where a seller has made nonsalvageable investments in buyers since it enables the seller to take actions to pr...

  3. Trade liberalization and gender inequality

    OpenAIRE

    Pieters, Janneke

    2015-01-01

    Women consistently work less in the labor market and earn lower wages than men. While economic empowerment of women is an important objective in itself, women's economic activity also matters as a condition for sustained economic growth. The political debate on the labor market impacts of international trade typically differentiates workers by their educational attainment or skills. Gender is a further dimension in which the impacts of trade liberalization can differ. In a globalizing world i...

  4. Optimal Trading with Alpha Predictors

    OpenAIRE

    Filippo Passerini; Samuel E. Vazquez

    2015-01-01

    We study the problem of optimal trading using general alpha predictors with linear costs and temporary impact. We do this within the framework of stochastic optimization with finite horizon using both limit and market orders. Consistently with other studies, we find that the presence of linear costs induces a no-trading zone when using market orders, and a corresponding market-making zone when using limit orders. We show that, when combining both market and limit orders, the problem is furthe...

  5. Derivatives Trading and Negative Voting

    OpenAIRE

    Spamann, Holger

    2012-01-01

    This paper exposits a model of parallel trading of corporate securities (shares, bonds) and derivatives in which a large trader can sometimes profitably acquire securities with their corporate control rights for the sole purpose of reducing the corporations value and gaining on a net short position created through off-setting derivatives. At other times, the large trader profitably takes a net long position. The large trader requires no private information beyond its own trades. The problem i...

  6. Trade Liberalization and Organizational Change

    OpenAIRE

    Paola Conconi; Patrick Legros; Andrew F. Newman

    2008-01-01

    We embed a simple incomplete-contracts model of organization design in a standard two-country perfectly-competitive trade model to examine how the liberalization of product and factor markets affects the ownership structure of firms. In our model, managers decide whether or not to integrate their firms, trading off the pecuniary benefits of coordinating production decisions with the private benefits of operating in their preferred ways. The price of output is a crucial determinant of this cho...

  7. Organ trade using social networks

    OpenAIRE

    Waleed Alrogy; Dunia Jawdat; Muhannad Alsemari; Abdulrahman Alharbi; Abdullah Alasaad; Ali H Hajeer

    2016-01-01

    Organ transplantation is recognized worldwide as an effective treatment for organ failure. However, due to the increase in the number of patients requiring a transplant, a shortage of suitable organs for transplantation has become a global problem. Human organ trade is an illegal practice of buying or selling organs and is universally sentenced. The aim of this study was to search social network for organ trade and offerings in Saudi Arabia. The study was conducted from June 22, 2015 to Febru...

  8. GLOBALIZATION & REGIONALIZATION IN INTERNATIONAL TRADE

    Directory of Open Access Journals (Sweden)

    Ramona Frunză

    2009-12-01

    Full Text Available The concept of globalization refers to the growing interdependence of countries, resulting from the increasing integration of trade, finance, investments, labor markets and ideas in one globalmarketplace. The most important elements of this process are the international trade and the cross-border investment flows. Economic globalization has increased the specialization of workers, while the companies compete in global markets. Even globalization has recently become a common topic in academic discourse, many economists focused, from the 1980s and 1990s, in addition to globalization, on regionalization - the growth of networks of interdependence within multinational regions of the world. The recent decades arecharacterized by the fact that the world trade grew faster than world output, which implies that an increasing share of world GDP crosses international borders. The trend is explained, mostly, by thesubstantially declining of the trade barriers during the same period, as a result of successive trade negotiation rounds under the auspices of the GATT/WTO, unilateral trade liberalization and regional tradeagreements. Even there are global connections between all the countries, the strongest political and economic integration is being created within a few specific regions of the world: Europe, North America and East Asia.

  9. Causes and Remedies for Errors in International Forest Products Trade Data: Examples from the Hardwood Trade Statistics

    Science.gov (United States)

    William G. Luppold; William G. Luppold

    1995-01-01

    The quality of data concerning international hardwood products trade declined in the 1980s because of several problems associated with the collection and processing of individual export transaction records. This note examines the source, impact, and remedies for data problems caused by data screening procedures, nonreporting, recording errors, and alternative...

  10. International trade in services: A scoping study of services trade and estimates of benefits from services trade liberalisation

    OpenAIRE

    Ballingall, John; Stephenson, John

    2005-01-01

    This is a scoping study. It summarises the dynamics of services trade in the world economy and discusses some of the benefits of services trade liberalisation from a qualitative and quantitative view point. We place particular emphasis on the role and interests of developing and least developed countries in world services trade. The study also provides an overview of services trade in the New Zealand economy, and, in places, highlights aspects of services trade where New Zealand’s interests m...

  11. 27 CFR 19.165 - Trade names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Trade names. 19.165 Section 19.165 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... Trade names. (a) Operating permits. Where a trade name is to be used in connection with the operations...

  12. 40 CFR 91.206 - Trading.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Trading. 91.206 Section 91.206... EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Averaging, Banking, and Trading Provisions § 91.206 Trading. (a... manufacturers in trading. These credits must be used in the same averaging set as generated. (b) Credits for...

  13. 40 CFR 91.1306 - Trading.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Trading. 91.1306 Section 91.1306... EMISSIONS FROM MARINE SPARK-IGNITION ENGINES In-Use Credit Program for New Marine Engines § 91.1306 Trading... engine manufacturers through trading. (b) In-use credits for trading can be obtained from credits banked...

  14. Trading Cost Management of Mutual Funds

    NARCIS (Netherlands)

    R. Xing (Rang)

    2016-01-01

    textabstractThis paper documents the trading behaviour of actively managed equity mutual funds from the perspective of their trading cost management. Consistent with the predictions in the literature of portfolio choice with trading costs, I present three main findings. Firstly, mutual funds trade

  15. Trade credit: Elusive insurance of firm growth

    NARCIS (Netherlands)

    Bams, Dennis; Bos, Jaap; Pisa, Magdalena

    2016-01-01

    Firms depend heavily on trade credit. This paper introduces a trade credit network into a structural model of the economy. In an empirical analysis of the model, we find that trade credit is an elusive insurance: as long as a firm is financially unconstrained and times are good, more trade credit

  16. The Effect of the Post 2001 Reforms on FMD Risks of the International Live Animal Trade.

    Science.gov (United States)

    Shanafelt, David W; Perrings, C

    2018-02-27

    The 2001 UK foot and mouth disease (FMD) epidemic marked a change in global FMD management, focusing less on trade isolation than on biosecurity within countries where FMD is endemic. Post 2001 policy calls for the isolation of disease-free zones in FMD-endemic countries, while increasing the opportunities for trade. The impact of the change on disease risk has yet to be tested. In this paper, we estimate an empirical model of disease risk that tests for the impact of trade volumes before and after 2001, controlling for biosecurity measures. In the pre 2001 regime, we find that poor biosecurity was associated with the probability of reporting an outbreak. In the post 2001 regime, the risks changed, with trade being a much greater source of risk. We discuss the trade-off between trade restrictions and biosecurity measures in the management of FMD disease risks.

  17. Comparison Algorithm Kernels on Support Vector Machine (SVM) To Compare The Trend Curves with Curves Online Forex Trading

    OpenAIRE

    irfan abbas

    2017-01-01

    At this time, the players Forex Trading generally still use the data exchange in the form of a Forex Trading figures from different sources. Thus they only receive or know the data rate of a Forex Trading prevailing at the time just so difficult to analyze or predict exchange rate movements future. Forex players usually use the indicators to enable them to analyze and memperdiksi future value. Indicator is a decision making tool. Trading forex is trading currency of a country, the other count...

  18. THE WORLD TRADE ORGANIZATION (WTO FREE TRADE WITHIN FAIR TRADE CHALLENGES

    Directory of Open Access Journals (Sweden)

    M. Ya’kub Aiyub Kadir

    2014-06-01

    Full Text Available Free trade and fair trade are considered an ambiguous term with relative meanings of identification. Objectively, free and fair trade does not mean completely free and fair, but it means trade under binding rules obeyed by member countries as a consequence of their commitment after signing and ratification of the WTO agreements. Hence, this paper aims at exploring the issue and does an effort to harmonise between free trade and fair trade within the WTO system. Perdagangan bebas dan perdagangan yang adil adalah dua istilah yang ambigu maknanya. Secara obyektif, perdagangan bebas tidak bermakna bebas dan adil seluruhnya, tetapi bermakna sebuah perdagangan di bawah aturan-aturan mengikat setelah negara anggota menandatangani dan meratifikasi kesepakatan WTO. Tetapi dalam realitas kebanyakan Negara, terutama negara berkembang tidak mampu untuk membuka pasar dan menurunkan tarif secara keseluruhan. Persoalan tidak berimbangnya kekuatan, kurang demokrasi, krisis legitimasi dan dobel standar dalam WTO sistem merupakan sebuah tantangan yang masih berlanjut. Paper ini akan mengkaji persoalan ini dan berupaya mengharmonisasikan antara perdagangan bebas dan adil dalam sistem WTO.

  19. THE WORLD TRADE ORGANIZATION (WTO FREE TRADE WITHIN FAIR TRADE CHALLENGES

    Directory of Open Access Journals (Sweden)

    M. Ya’kub Aiyub Kadir

    2014-06-01

    Full Text Available Free trade and fair trade are considered an ambiguous term with relative meanings of identification. Objectively, free and fair trade does not mean completely free and fair, but it means trade under binding rules obeyed by member countries as a consequence of their commitment after signing and ratification of the WTO agreements. Hence, this paper aims at exploring the issue and does an effort to harmonise between free trade and fair trade within the WTO system.   Perdagangan bebas dan perdagangan yang adil adalah dua istilah yang ambigu maknanya. Secara obyektif, perdagangan bebas tidak bermakna bebas dan adil seluruhnya, tetapi bermakna sebuah perdagangan di bawah aturan-aturan mengikat setelah negara anggota menandatangani dan meratifikasi kesepakatan WTO. Tetapi dalam realitas kebanyakan Negara, terutama negara berkembang tidak mampu untuk membuka pasar dan menurunkan tarif secara keseluruhan. Persoalan tidak berimbangnya kekuatan, kurang demokrasi, krisis legitimasi dan dobel standar dalam WTO sistem merupakan sebuah tantangan yang masih berlanjut. Paper ini akan mengkaji persoalan ini dan berupaya mengharmonisasikan antara perdagangan bebas dan adil dalam sistem WTO.

  20. Electricity as a traded good

    International Nuclear Information System (INIS)

    Srinivasan, Sunderasan

    2013-01-01

    Electric power has traditionally been classified as a non-traded good, produced and consumed within the country of origin. More recently, electricity has been traded across national borders and in certain cases, viz., Bhutan, has been the dominant export; in other situations, it is used to repay debts owed to neighboring countries. This paper investigates the role of electricity as the primary export, analyzes its valuation, and then goes on to evaluate the impact on the terms of trade. We conclude that in the medium-term, the electric power exporting economy would be better off developing its manufacturing sector to diversify its exposure and to protect its trade interests. The case of Bhutanese hydro-electricity exports to India is studied and the change in trade advantage with every increase in power tariff is ascertained. It is found that a 1.26% annual increase in (non-food) consumer prices is correlated with a 1% increase in electricity export tariff. While the causality from electric power tariff to Indian manufactures prices is not established statistically, a change in manufactures prices feeding back into consumer prices in Bhutan is statistically significant. Suggestions are offered for Bhutan to reduce dependence on Indian imports and to diversify its export market exposure. - Highlights: • Electricity as principal export of small economy. • Bilateral trade with large economy. • Tourism as major income generator for small economy. • Partial equilibrium model involving key variables. • Small economy would need to diversify. • Important subject for inter-temporal and inter-regional trade of power