WorldWideScience

Sample records for track structure analysis

  1. Structural analysis of simulated swift heavy ion tracks in quartz

    International Nuclear Information System (INIS)

    Leino, Aleksi A.; Daraszewicz, Szymon L.; Pakarinen, Olli H.; Djurabekova, Flyura; Nordlund, Kai; Afra, Boshra; Kluth, Patrick

    2014-01-01

    Swift heavy ions (SHI), of specific kinetic energies in the excess of 1 MeV/u, can create cylindrical regions of structural transformation in SiO 2 targets, also known as SHI tracks. Recent measurements of the track cross-sections in α-quartz show significant and consistent discrepancies across different experimental techniques used. In particular, the track radii obtained from channelling experiments based on the Rutherford Backscattering Spectrometry (RBS-c) method increase monotonically with the electronic stopping power, whereas the track radii obtained from the Small Angle X-ray scattering (SAXS) saturate past a certain stopping power threshold. We perform a systematic study of the structure of the α-quartz tracks obtained from the molecular dynamics (MD) simulations incorporating a time-dependent energy deposition based on the inelastic thermal spike model, which allows us to discuss the possible origins of these experimental discrepancies

  2. Analysis and design of on-grade reinforced concrete track support structures

    Science.gov (United States)

    Mclean, F. G.; Williams, R. D.; Greening, L. R.

    1972-01-01

    For the improvement of rail service, the Department of Transportation, Federal Rail Administration, is sponsoring a test track on the Atchison, Topeka, and Santa Fe Railway. The test track will contain nine separate rail support structures, including one conventional section for control and three reinforced concrete structures on grade, one slab and two beam sections. The analysis and design of these latter structures was accomplished by means of the finite element method, NASTRAN, and is presented.

  3. Structural Sparse Tracking

    KAUST Repository

    Zhang, Tianzhu

    2015-06-01

    Sparse representation has been applied to visual tracking by finding the best target candidate with minimal reconstruction error by use of target templates. However, most sparse representation based trackers only consider holistic or local representations and do not make full use of the intrinsic structure among and inside target candidates, thereby making the representation less effective when similar objects appear or under occlusion. In this paper, we propose a novel Structural Sparse Tracking (SST) algorithm, which not only exploits the intrinsic relationship among target candidates and their local patches to learn their sparse representations jointly, but also preserves the spatial layout structure among the local patches inside each target candidate. We show that our SST algorithm accommodates most existing sparse trackers with the respective merits. Both qualitative and quantitative evaluations on challenging benchmark image sequences demonstrate that the proposed SST algorithm performs favorably against several state-of-the-art methods.

  4. Classifications of track structures

    International Nuclear Information System (INIS)

    Paretzke, H.G.

    1984-01-01

    When ionizing particles interact with matter they produce random topological structures of primary activations which represent the initial boundary conditions for all subsequent physical, chemical and/or biological reactions. There are two important aspects of research on such track structures, namely their experimental or theoretical determination on one hand and the quantitative classification of these complex structures which is a basic pre-requisite for the understanding of mechanisms of radiation actions. This paper deals only with the latter topic, i.e. the problems encountered in and possible approaches to quantitative ordering and grouping of these multidimensional objects by their degrees of similarity with respect to their efficiency in producing certain final radiation effects, i.e. to their ''radiation quality.'' Various attempts of taxonometric classification with respect to radiation efficiency have been made in basic and applied radiation research including macro- and microdosimetric concepts as well as track entities and stopping power based theories. In this paper no review of those well-known approaches is given but rather an outline and discussion of alternative methods new to this field of radiation research which have some very promising features and which could possibly solve at least some major classification problems

  5. Fully three-dimensional analysis of high-speed train-track-soil-structure dynamic interaction

    Science.gov (United States)

    Galvín, P.; Romero, A.; Domínguez, J.

    2010-11-01

    In this paper, a general and fully three dimensional multi-body-finite element-boundary element model, formulated in the time domain to predict vibrations due to train passage at the vehicle, the track and the free field, is presented. The vehicle is modelled as a multi-body system and, therefore, the quasi-static and the dynamic excitation mechanisms due to train passage can be considered. The track is modelled using finite elements. The soil is considered as a homogeneous half-space by the boundary element method. This methodology could be used to take into account local soil discontinuities, underground constructions such as underpasses, and coupling with nearby structures that break the uniformity of the geometry along the track line. The nonlinear behaviour of the structures could be also considered. In the present paper, in order to test the model, vibrations induced by high-speed train passage are evaluated for a ballasted track. The quasi-static and dynamic load components are studied and the influence of the suspended mass on the vertical loads is analyzed. The numerical model is validated by comparison with experimental records from two HST lines. Finally, the dynamic behaviour of a transition zone between a ballast track and a slab track is analyzed and the obtained results from the proposed model are compared with those obtained from a model with invariant geometry with respect to the track direction.

  6. Excitation of Structures Near Railway Tracks-Analysis of the Wave Propagation Path

    DEFF Research Database (Denmark)

    Bucinskas, Paulius; Andersen, Lars Vabbersgaard

    2017-01-01

    High-speed rails are an attractive alternative to other forms of intercity transportation. It is a fast, cost-efficient and environmentally friendly solution, which is being developed in various countries across the world. However, in order to be successful, high-speed rails need to transport....... This work aims to analyse how different features in the wave propagation path affect the excitation of a structure. A numerical model is constructed to account for the track structure and the underlying soil. The model utilizes a finite-element model for the structures together with a semi-analytical model...

  7. Track structure in biological models.

    Science.gov (United States)

    Curtis, S B

    1986-01-01

    High-energy heavy ions in the galactic cosmic radiation (HZE particles) may pose a special risk during long term manned space flights outside the sheltering confines of the earth's geomagnetic field. These particles are highly ionizing, and they and their nuclear secondaries can penetrate many centimeters of body tissue. The three dimensional patterns of ionizations they create as they lose energy are referred to as their track structure. Several models of biological action on mammalian cells attempt to treat track structure or related quantities in their formulation. The methods by which they do this are reviewed. The proximity function is introduced in connection with the theory of Dual Radiation Action (DRA). The ion-gamma kill (IGK) model introduces the radial energy-density distribution, which is a smooth function characterizing both the magnitude and extension of a charged particle track. The lethal, potentially lethal (LPL) model introduces lambda, the mean distance between relevant ion clusters or biochemical species along the track. Since very localized energy depositions (within approximately 10 nm) are emphasized, the proximity function as defined in the DRA model is not of utility in characterizing track structure in the LPL formulation.

  8. Parametric Methods for Order Tracking Analysis

    DEFF Research Database (Denmark)

    Nielsen, Jesper Kjær; Jensen, Tobias Lindstrøm

    2017-01-01

    Order tracking analysis is often used to find the critical speeds at which structural resonances are excited by a rotating machine. Typically, order tracking analysis is performed via non-parametric methods. In this report, however, we demonstrate some of the advantages of using a parametric method...

  9. Two lectures on track structure

    International Nuclear Information System (INIS)

    Waligorski, M.P.R.

    1987-01-01

    In a series of two lectures the principles of track structure theory, developed by Katz and collaborators, are reviewed. The text is intended to serve as an introduction to the theory. Applications of the model to c-hit physical detectors and to biological systems are reviewed. The model relates the signal of a detector after doses of X and gamma radiations to its signal after heavy charged particle irradiations, and is applicable to a variety of physical dosimeters: alanine, thermoluminescence and the Fricke dosimeters, to the inactivation of enzymes and viruses, and to biological systems: description of survival and neoplastic transformations in mammalian cells. Application of the model to heavy-ion cancer radiotherapy and to radiation protection is discussed as well as the controversies around the track structure approach. The model suggests new insights to fundamental research in detector theory and in radiobiology and in their applications in radiotherapy and radiation protection. 41 refs., 39 figs. (author)

  10. Case Analysis Tracking System

    Data.gov (United States)

    National Archives and Records Administration — CATS tracks Public and Federal Agency Reference Requests for OPF (Official Personnel Folder) , EMF (Employee Medical Folder), and eOPF (electronic Official Personnel...

  11. Detection, Tracking and Analysis of Turbulent Spots and Other Coherent Structures in Unsteady Transition

    Science.gov (United States)

    Lewalle, Jacques; Ashpis, David (Technical Monitor)

    2000-01-01

    Transition on turbine blades is an important factor in the determination of eventual flow separation and engine performance. The phenomenon is strongly affected by unsteady flow conditions (wake passing). It is likely that some physics of unsteadiness should be included in advanced models, but it is unclear which properties would best embody this information. In this paper, we use a GEAE experimental database in unsteady transition to test some tools of spot identification, tracking and characterization. In this preliminary study, we identify some parameters that appear to be insensitive to wake passing effects, such as convection speed, and others more likely to require unsteady modeling. The main findings are that wavelet duration can be used as a measure of spot size, and that spot energy density is most closely correlated to the wake passing. The energy density is also correlated to spot size, but spot size appears unrelated to the phase angle. Recommendations are made for further study.

  12. [Observation and analysis on the meridian-collateral running track-related anatomical structure in the human body].

    Science.gov (United States)

    Xie, Hao-ran; Li, Fang-chun; Zhang, Wei-bo

    2009-06-01

    In the present paper the authors analyze the anatomical structure of the meridian running track by using the dialectical thought and comprehensive analysis of the integrated Chinese and western medicine. It has been observed that the "Qi-passages" of the 14 meridians of Chinese medicine are located in the connective tissue among the interspace of the muscles, etc. distributing longitudinally. The "Qi-passages" of the 15 Luomai (collaterals of the meridians) are located in the connective tissue among the interspace of the muscles, etc. distributing transversally, while those of the small branches of the meridian collaterals are located in the interspace mesenchyme of the muscle bundles distributing in the whole body. The "Qi-passages" of the tiny branches of the meridian collaterals are located in the mesenchyme of the intracellular space, such as the muscle fibers in the whole body. The authors hold that the so-called "Mai Qi" of the meridian-collaterals is the liquid-Qi flowing in the vertical and horizontal tissue interspaces. The "Qi-passage" of the meridian-collaterals of Chinese medicine is the pathway of the liquid-Qi of the tissue interspaces. The structure of the meridian-collaterals is the tissue interspace. The meridian-collateral system is a regulation-control system in the human body where the Qi-passages communicate with each other, and is, in fact, the protoplasm, the liquid-Qi circulating in the tissue interspaces.

  13. Track structure for low energy ions including charge exchange processes

    International Nuclear Information System (INIS)

    Uehara, S.; Nikjoo, H.

    2002-01-01

    The model and development is described of a new generation of Monte Carlo track structure codes. The code LEAHIST simulates full slowing down of low-energy proton history tracks in the range 1 keV-1 MeV and the code LEAHIST simulates low-energy alpha particle history tracks in the range 1 keV-8 MeV in water. All primary ion interactions are followed down to 1 keV and all electrons to 1 eV. Tracks of secondary electrons ejected by ions were traced using the electron code KURBUC. Microdosimetric parameters derived by analysis of generated tracks are presented. (author)

  14. Vibro-acoustic performance of newly designed tram track structures

    Science.gov (United States)

    Haladin, Ivo; Lakušić, Stjepan; Ahac, Maja

    2017-09-01

    Rail vehicles in interaction with a railway structure induce vibrations that are propagating to surrounding structures and cause noise disturbance in the surrounding areas. Since tram tracks in urban areas often share the running surface with road vehicles one of top priorities is to achieve low maintenance and long lasting structure. Research conducted in scope of this paper gives an overview of newly designed tram track structures designated for use on Zagreb tram network and their performance in terms of noise and vibration mitigation. Research has been conducted on a 150 m long test section consisted of three tram track types: standard tram track structure commonly used on tram lines in Zagreb, optimized tram structure for better noise and vibration mitigation and a slab track with double sleepers embedded in a concrete slab, which presents an entirely new approach of tram track construction in Zagreb. Track has been instrumented with acceleration sensors, strain gauges and revision shafts for inspection. Relative deformations give an insight into track structure dynamic load distribution through the exploitation period. Further the paper describes vibro-acoustic measurements conducted at the test site. To evaluate the track performance from the vibro-acoustical standpoint, detailed analysis of track decay rate has been analysed. Opposed to measurement technique using impact hammer for track decay rate measurements, newly developed measuring technique using vehicle pass by vibrations as a source of excitation has been proposed and analysed. Paper gives overview of the method, it’s benefits compared to standard method of track decay rate measurements and method evaluation based on noise measurements of the vehicle pass by.

  15. Dynamic kirigami structures for integrated solar tracking

    Science.gov (United States)

    Lamoureux, Aaron; Lee, Kyusang; Shlian, Matthew; Forrest, Stephen R.; Shtein, Max

    2015-01-01

    Optical tracking is often combined with conventional flat panel solar cells to maximize electrical power generation over the course of a day. However, conventional trackers are complex and often require costly and cumbersome structural components to support system weight. Here we use kirigami (the art of paper cutting) to realize novel solar cells where tracking is integral to the structure at the substrate level. Specifically, an elegant cut pattern is made in thin-film gallium arsenide solar cells, which are then stretched to produce an array of tilted surface elements which can be controlled to within ±1°. We analyze the combined optical and mechanical properties of the tracking system, and demonstrate a mechanically robust system with optical tracking efficiencies matching conventional trackers. This design suggests a pathway towards enabling new applications for solar tracking, as well as inspiring a broader range of optoelectronic and mechanical devices. PMID:26348820

  16. The latest progress of fission track analysis

    International Nuclear Information System (INIS)

    Wang Shicheng

    1996-01-01

    Fission track analysis as a new nuclear track technique is based on fission track annealing in mineral and is used for oil and gas exploration successfully. The west part of China is the main exploration for oil and gas. The oil and gas basins there experienced much more complicated thermal history and higher paleotemperature. In order to apply fission track analysis to these basins, following work was be carried out: 1. The decomposition of grain age distribution of zircon fission tracks. 2. Study on thermal history of Ordos basin using zircon fission track analysis. 3. The fission track study on the Qiang Tang basin in tibet

  17. Evolution of the Chos Malal and Agrio fold and thrust belts, Andes of Neuquén: Insights from structural analysis and apatite fission track dating

    Science.gov (United States)

    Rojas Vera, E. A.; Mescua, J.; Folguera, A.; Becker, T. P.; Sagripanti, L.; Fennell, L.; Orts, D.; Ramos, V. A.

    2015-12-01

    The Chos Malal and Agrio fold and thrust belts are located in the western part of the Neuquén basin, an Andean retroarc basin of central-western Argentina. Both belts show evidence of tectonic inversion at the western part during Late Cretaceous times. The eastern part is dominated by late Miocene deformation which also partially reactivated the western structures. This work focuses on the study of the regional structure and the deformational event that shaped the relief of this part of the Andes. Based on new field work and structural data and previously published works a detailed map of the central part of the Neuquén basin is presented. Three regional structural cross sections were surveyed and balanced using the 2d Move™ software. In order to define a more accurate uplift history, new apatite fission track analyses were carried on selected structures. These data was used for new thermal history modeling of the inner part of the Agrio and Chos Malal fold and thrust belts. The results of the fission track analyses improve the knowledge of how these fold and thrust belts have grown trough time. Two main deformational events are defined in Late Cretaceous to Paleocene and Late Miocene times. Based on this regional structural analysis and the fission track data the precise location of the orogenic front for the Late Cretaceous-Paleocene times is reconstructed and it is proposed a structural evolution of this segment of the Andes. This new exhumation data show how the Late Cretaceous to Paleocene event was a continuous and uninterrupted deformational event.

  18. Online Simulation of Radiation Track Structure Project

    Science.gov (United States)

    Plante, Ianik

    2015-01-01

    Space radiation comprises protons, helium and high charged and energy (HZE) particles. High-energy particles are a concern for human space flight, because they are no known options for shielding astronauts from them. When these ions interact with matter, they damage molecules and create radiolytic species. The pattern of energy deposition and positions of the radiolytic species, called radiation track structure, is highly dependent on the charge and energy of the ion. The radiolytic species damage biological molecules, which may lead to several long-term health effects such as cancer. Because of the importance of heavy ions, the radiation community is very interested in the interaction of HZE particles with DNA, notably with regards to the track structure. A desktop program named RITRACKS was developed to simulate radiation track structure. The goal of this project is to create a web interface to allow registered internal users to use RITRACKS remotely.

  19. Preparation of fluoropolymer-based ion-track membranes. Structure of latent tracks and pretreatment effect

    International Nuclear Information System (INIS)

    Yamaki, Tetsuya; Nuryanthi, Nuryanthi; Koshikawa, Hiroshi; Sawada, Shinichi; Hakoda, Teruyuki; Hasegawa, Shin; Asano, Masaharu; Maekawa, Yasunari

    2012-01-01

    High-energy heavy-ion induced damage, called latent tracks m organic polymers can sometimes be etched out chemically to give submicro- and nano-sized pores. Our focus is placed on ion-track membranes of poly(vinylidene fluoride) (PVDF), a type of fluoropolymer, which were previously considered as a matrix of polymer electrolyte fuel-cell membranes. There have been no optimized methods of preparing the PVDF-based ion-track membranes. We thus examined chemical structures of the defects created in the track, and accordingly, presented a pretreatment technique for achieving more efficient track etching. A 25 μm-thick PVDF film was bombarded with 1.1 GeV 238 U or 450 MeV 129 Xe ions. In the multi-purpose chamber, degradation processes were monitored in-situ by FT-IR spectroscopy and residual gas analysis as a function of the fluence up to 6.0 x 10 11 ions/cm 2 . The films irradiated at 8 ions/cm 2 were etched in a 9 M KOH aqueous solution at 80degC. We also performed the conductometric etching, which allows monitoring of pore evolution versus etching time by recording the electrical conductance through the membrane. At fluences above 1 x 10 10 ions/cm 2 , the film showed two new absorption bands identified as double-bond stretching vibrations of in-chain unsaturations -CH=CF- and fluorinated vinyl groups -CF 2 CH=CF 2 . These defects would result from the evolution of HF. The knowledge of the solubility in a permanganate alkaline solution and our preliminary experiment suggested the importance of oxidized tracks for the easy introduction of the etching agent. We finally found that the pretreatment with ozone could oxidize the double bonds in the tracks, thereby vigorously promoting track etching before breakthrough. (author)

  20. Particle track structure and its correlation with radiobiological endpoint

    International Nuclear Information System (INIS)

    Michalik, V.

    1991-01-01

    One of the possible ways to classify track structures is application of conventional partition techniques of analysis of multidimensional data to the track structure. Using these cluster algorithms this paper attempts to find characteristics of radiation reflecting spatial distribution of ionizations in the primary particle track. Absolute frequency distributions of clusters giving the mean number of clusters produced by radiation per unit of deposited energy have been computed for radiations of different qualities. Results were compared with published data of cell inactivation. For particular biological objects the critical properties of radiation correlating with the cell inactivation can be found and it seems that the occurrence of a cluster of at least four ionizations formed in a domain of ∼2-3 nm correlates with the induction of double strand break. (author)

  1. Secondary Analysis for Results Tracking Database

    Data.gov (United States)

    US Agency for International Development — The Secondary Analysis and Results Tracking (SART) activity provides support for the development of two databases to manage secondary and third-party data, data...

  2. Solar Tracking Error Analysis of Fresnel Reflector

    Directory of Open Access Journals (Sweden)

    Jiantao Zheng

    2014-01-01

    Full Text Available Depending on the rotational structure of Fresnel reflector, the rotation angle of the mirror was deduced under the eccentric condition. By analyzing the influence of the sun tracking rotation angle error caused by main factors, the change rule and extent of the influence were revealed. It is concluded that the tracking errors caused by the difference between the rotation axis and true north meridian, at noon, were maximum under certain conditions and reduced at morning and afternoon gradually. The tracking error caused by other deviations such as rotating eccentric, latitude, and solar altitude was positive at morning, negative at afternoon, and zero at a certain moment of noon.

  3. Analysis of the interface tracking errors

    International Nuclear Information System (INIS)

    Cerne, G.; Tiselj, I.; Petelin, S.

    2001-01-01

    An important limitation of the interface-tracking algorithm is the grid density, which determines the space scale of the surface tracking. In this paper the analysis of the interface tracking errors, which occur in a dispersed flow, is performed for the VOF interface tracking method. A few simple two-fluid tests are proposed for the investigation of the interface tracking errors and their grid dependence. When the grid density becomes too coarse to follow the interface changes, the errors can be reduced either by using denser nodalization or by switching to the two-fluid model during the simulation. Both solutions are analyzed and compared on a simple vortex-flow test.(author)

  4. Track-to-Track Association Based on Structural Similarity in the Presence of Sensor Biases

    Directory of Open Access Journals (Sweden)

    Hongyan Zhu

    2014-01-01

    Full Text Available The paper addresses the problem of track-to-track association in the presence of sensor biases. In some challenging scenarios, it may be infeasible to implement bias estimation and compensation in time due to the computational intractability or weak observability about sensor biases. In this paper, we introduce the structural feature for each local track, which describes the spatial relationship with its neighboring targets. Although the absolute coordinates of local tracks from the same target are severely different in the presence of sensor biases, their structural features may be similar. As a result, instead of using the absolute kinematic states only, we employee the structural similarity to define the association cost. When there are missed detections, the structural similarity between local tracks is evaluated by solving another 2D assignment subproblem. Simulation results demonstrated the power of the proposed approach.

  5. Motion Tracking for Medical Imaging: A Non-Visible Structured Light Tracking Approach

    DEFF Research Database (Denmark)

    Olesen, Oline Vinter; Paulsen, Rasmus Reinhold; Højgaard, Liselotte

    2012-01-01

    We present a system for head motion tracking in 3D brain imaging. The system is based on facial surface reconstruction and tracking using a structured light (SL) scanning principle. The system is designed to fit into narrow 3D medical scanner geometries limiting the field of view. It is tested...

  6. Target Tracking Based Scene Analysis

    Science.gov (United States)

    1984-08-01

    NATO Advanced Study PG Institute, Braunlage/ Harz , FRG, June 21 July 2, 1I82 Springer, Berlin, 1983, pp. 493-501. 141 B. Bhanu."Recognition of...Braunlage/ Harz . FRG, June 21 - July 2, 1082 Springer, Berlin, 1083. pp 10.1-124. [81 R.B. Cate, T.*1B. Dennis, J.T. Mallin, K.S. Nedelman, NEIL Trenchard, and...34Image, Sequence Processing and Dynamic Scene Analysis", Proceedings of NATO,. Advanced Study Institute, Braunlage/ Harz , FRG, June 21 - July 2, 1982

  7. New Low Cost Structure for Dual Axis Mount Solar Tracking System Using Adaptive Solar Sensor

    DEFF Research Database (Denmark)

    Argeseanu, Alin; Ritchie, Ewen; Leban, Krisztina Monika

    2010-01-01

    A solar tracking system is designed to optimize the operation of solar energy receivers. The objective of this paper is proposing a new tracking system structure with two axis. The success strategy of this new project focuses on the economical analysis of solar energy. Therefore it is important...... to determine the most cost effective design, to consider the costs of production and maintenance, and operating. The proposed tracking system uses a new solar sensor position with an adaptive feature....

  8. CHAMP Tracking and Accelerometer Data Analysis Results

    Science.gov (United States)

    Lemoine, Frank G.; Luthcke, S. B.; Rowlands, D. D.; Pavlis, D. E.; Colombo, O. L.; Ray, Richard D.; Thompson, B.; Nerem, R. S.; Williams, Teresa A.; Smith, David E. (Technical Monitor)

    2002-01-01

    The CHAMP (Challenging Minisatellite Payload) mission's unique combination of sensors and orbit configuration will enable unprecedented improvements in modeling and understanding the Earth's static gravity field and its temporal variations. CHAMP is the first of two missions (GRACE (Gravity Recovery and Climate Experiment) to be launched in the later part of '01) that combine a new generation of GPS (Global Positioning System) receivers, a high precision three axis accelerometer, and star cameras for the precision attitude determination. In order to isolate the gravity signal for science investigations, it is necessary to perform a detailed reduction and analysis of the GPS and SLR tracking data in conjunction with the accelerometer and attitude data. Precision orbit determination based on the GPS and SLR (Satellite Laser Ranging) tracking data will isolate the orbit perturbations, while the accelerometer data will be used to distinguish the surface forces from those due to the geopotential (static, and time varying). In preparation for the CHAMP and GRACE missions, extensive modifications have been made to NASA/GSFC's GEODYN orbit determination software to enable the simultaneous reduction of spacecraft tracking (e.g. GPS and SLR), three axis accelerometer and precise attitude data. Several weeks of CHAMP tracking and accelerometer data have been analyzed and the results will be presented. Precision orbit determination analysis based on tracking data alone in addition to results based on the simultaneous reduction of tracking and accelerometer data will be discussed. Results from a calibration of the accelerometer will be presented along with the results from various orbit determination strategies. Gravity field modeling status and plans will be discussed.

  9. MODAL TRACKING of A Structural Device: A Subspace Identification Approach

    Energy Technology Data Exchange (ETDEWEB)

    Candy, J. V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Franco, S. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ruggiero, E. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Emmons, M. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lopez, I. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Stoops, L. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-03-20

    Mechanical devices operating in an environment contaminated by noise, uncertainties, and extraneous disturbances lead to low signal-to-noise-ratios creating an extremely challenging processing problem. To detect/classify a device subsystem from noisy data, it is necessary to identify unique signatures or particular features. An obvious feature would be resonant (modal) frequencies emitted during its normal operation. In this report, we discuss a model-based approach to incorporate these physical features into a dynamic structure that can be used for such an identification. The approach we take after pre-processing the raw vibration data and removing any extraneous disturbances is to obtain a representation of the structurally unknown device along with its subsystems that capture these salient features. One approach is to recognize that unique modal frequencies (sinusoidal lines) appear in the estimated power spectrum that are solely characteristic of the device under investigation. Therefore, the objective of this effort is based on constructing a black box model of the device that captures these physical features that can be exploited to “diagnose” whether or not the particular device subsystem (track/detect/classify) is operating normally from noisy vibrational data. Here we discuss the application of a modern system identification approach based on stochastic subspace realization techniques capable of both (1) identifying the underlying black-box structure thereby enabling the extraction of structural modes that can be used for analysis and modal tracking as well as (2) indicators of condition and possible changes from normal operation.

  10. Correlation-Based Tracking of Multiple Targets With Hierarchical Layered Structure.

    Science.gov (United States)

    Cao, Xianbin; Jiang, Xiaolong; Li, Xiaomei; Yan, Pingkun

    2018-01-01

    Visual target tracking is one of the most important research areas in the field of computer vision. Within this realm, multiple targets tracking (MTT) under complicated scene stands out for its great availability in real life applications, such as urban traffic surveillance and sports video analysis. However, in MTT, main difficulties arise from large variation in target saliency and significant motion heterogeneity, which may result in the failure of tracking weak targets. To tackle this challenge, a novel hierarchical layered tracking structure is proposed to perform tracking sequentially layer-by-layer. Upon this layered structure, we establish an intertarget mutual assistance mechanism on basis of intertarget correlation exploited among targets. The tracking results of a subset of targets can be utilized as additional prior information for tracking other targets. Specifically, a nonlinear motion model as well as a target interaction model basing on the intertarget correlation are proposed to effectively estimate the possible target region-of-interest to facilitate the prediction-based tracking. Moreover, the concept of motion entropy is introduced to quantitatively measure the degree of motion heterogeneity within the tracking scene for layer construction. Compared to other existing methods, extensive experiments demonstrated that the proposed method is capable of achieving higher tracking performance in complicated scenes, where targets are characterized with great heterogeneity.

  11. Economics of Concrete and Wood Tie Track Structures

    Science.gov (United States)

    1978-08-01

    This report presents results from an evaluation of the economic benefits of concrete- versus wood-tie track. The analysis includes the life-cycle capital, maintenance, and renewal costs for concrete- and wood-tie track for four specific test cases an...

  12. Track structure model of cell damage in space flight

    Science.gov (United States)

    Katz, Robert; Cucinotta, Francis A.; Wilson, John W.; Shinn, Judy L.; Ngo, Duc M.

    1992-01-01

    The phenomenological track-structure model of cell damage is discussed. A description of the application of the track-structure model with the NASA Langley transport code for laboratory and space radiation is given. Comparisons to experimental results for cell survival during exposure to monoenergetic, heavy-ion beams are made. The model is also applied to predict cell damage rates and relative biological effectiveness for deep-space exposures.

  13. Track inspection planning and risk measurement analysis.

    Science.gov (United States)

    2014-11-01

    This project models track inspection operations on a railroad network and discusses how the inspection results can : be used to measure the risk of failure on the tracks. In particular, the inspection times of the tracks, inspection frequency of the ...

  14. The seam visual tracking method for large structures

    Science.gov (United States)

    Bi, Qilin; Jiang, Xiaomin; Liu, Xiaoguang; Cheng, Taobo; Zhu, Yulong

    2017-10-01

    In this paper, a compact and flexible weld visual tracking method is proposed. Firstly, there was the interference between the visual device and the work-piece to be welded when visual tracking height cannot change. a kind of weld vision system with compact structure and tracking height is researched. Secondly, according to analyze the relative spatial pose between the camera, the laser and the work-piece to be welded and study with the theory of relative geometric imaging, The mathematical model between image feature parameters and three-dimensional trajectory of the assembly gap to be welded is established. Thirdly, the visual imaging parameters of line structured light are optimized by experiment of the weld structure of the weld. Fourth, the interference that line structure light will be scatters at the bright area of metal and the area of surface scratches will be bright is exited in the imaging. These disturbances seriously affect the computational efficiency. The algorithm based on the human eye visual attention mechanism is used to extract the weld characteristics efficiently and stably. Finally, in the experiment, It is verified that the compact and flexible weld tracking method has the tracking accuracy of 0.5mm in the tracking of large structural parts. It is a wide range of industrial application prospects.

  15. Using music structure to improve beat tracking

    Science.gov (United States)

    Dannenberg, Roger B.

    2005-09-01

    Beats are an important feature of most music. Beats are used in music information retrieval systems for genre classification, similarity search, and segmentation. However, beats can be difficult to identify, especially in music audio. Traditional beat trackers attempt to (1) match predicted beats to observations of likely beats, and (2) maintain a fairly steady tempo. A third criterion can be added: when repetitions of musical passages occur, the beats in the first repetition should align with the beats in all other repetitions. This third criterion improves beat tracking performance significantly. Repetitions of musical passages are discovered in audio data by searching for similar sequences of chroma vectors. Beats are ``tracked'' by first locating a sequence of likely beats in the music audio using high frequency energy as an indicator of beat likelihood. This beat sequence is then extended by searching forward and backward for more matching beats, allowing slight variations in tempo, and using a relaxation algorithm to optimize the proposed beat locations with respect to the three criteria. Other high-level music features may offer further improvements in beat identification.

  16. Radiation damage to DNA: The importance of track structure

    CERN Document Server

    Hill, M A

    1999-01-01

    A wide variety of biological effects are induced by ionizing radiation, from cell death to mutations and carcinogenesis. The biological effectiveness is found to vary not only with the absorbed dose but also with the type of radiation and its energy, i.e., with the nature of radiation tracks. An overview is presented of some of the biological experiments using different qualities of radiation, which when compared with Monte Carlo track structure studies, have highlighted the importance of the localized spatial properties of stochastic energy deposition on the nanometer scale at or near DNA. The track structure leads to clustering of damage which may include DNA breaks, base damage etc., the complexity of the cluster and therefore its biological repairability varying with radiation type. The ability of individual tracks to produce clustered damage, and the subsequent biological response are important in the assessment of the risk associated with low-level human exposure. Recent experiments have also shown that...

  17. Information structure and reference tracking in complex sentences

    CERN Document Server

    Gijn, Rik van; Matic, Dejan

    2014-01-01

    This paper discusses argument marking and reference tracking in Mekens complex clauses and their correlation to information structure. The distribution of pronominal arguments in Mekens simple clauses follows an absolutive pattern with main verbs. Complex clauses maintain the morphological absolutive argument marking, but show a nominative pattern with respect to argument reference tracking, since transitive and intransitive subjects function as syntactic pivots. The language extends the use of argument-marking verb morphology to control the reference of discourse participants across clauses.

  18. Tracking coherent structures in massively-separated and turbulent flows

    Science.gov (United States)

    Rockwood, Matthew; Huang, Yangzi; Green, Melissa

    2018-01-01

    Coherent vortex structures are tracked in simulations of massively-separated and turbulent flows. Topological Lagrangian saddle points are found using intersections of the positive and negative finite-time Lyapunov exponent ridges, and these points are then followed in order to track individual coherent structure motion both in a complex interacting three-dimensional flow (turbulent channel) and during vortex formation (two-dimensional bluff body shedding). For a simulation of wall-bounded turbulence in a channel flow, tracking Lagrangian saddles shows that the average structure convection speed exhibits a similar trend as a previously published result based on velocity and pressure correlations, giving validity to the method. When this tracking method is applied in a study of a circular cylinder in cross-flow it shows that Lagrangian saddles rapidly accelerate away from the cylinder surface as the vortex sheds. This saddle behavior is compared with the time-resolved static pressure distribution on the circular cylinder, yielding locations on a cylinder surface where common sensors could detect this phenomenon, which is not available from force measurements or vortex circulation calculations. The current method of tracking coherent structures yields insight into the behavior of the coherent structures in both of the diverse flows presented, highlighting the breadth of its potential application.

  19. Stochastic analysis model for vehicle-track coupled systems subject to earthquakes and track random irregularities

    Science.gov (United States)

    Xu, Lei; Zhai, Wanming

    2017-10-01

    This paper devotes to develop a computational model for stochastic analysis and reliability assessment of vehicle-track systems subject to earthquakes and track random irregularities. In this model, the earthquake is expressed as non-stationary random process simulated by spectral representation and random function, and the track random irregularities with ergodic properties on amplitudes, wavelengths and probabilities are characterized by a track irregularity probabilistic model, and then the number theoretical method (NTM) is applied to effectively select representative samples of earthquakes and track random irregularities. Furthermore, a vehicle-track coupled model is presented to obtain the dynamic responses of vehicle-track systems due to the earthquakes and track random irregularities at time-domain, and the probability density evolution method (PDEM) is introduced to describe the evolutionary process of probability from excitation input to response output by assuming the vehicle-track system as a probabilistic conservative system, which lays the foundation on reliability assessment of vehicle-track systems. The effectiveness of the proposed model is validated by comparing to the results of Monte-Carlo method from statistical viewpoint. As an illustrative example, the random vibrations of a high-speed railway vehicle running on the track slabs excited by lateral seismic waves and track random irregularities are analyzed, from which some significant conclusions can be drawn, e.g., track irregularities will additionally promote the dynamic influence of earthquakes especially on maximum values and dispersion degree of responses; the characteristic frequencies or frequency ranges respectively governed by earthquakes and track random irregularities are greatly different, moreover, the lateral seismic waves will dominate or even change the characteristic frequencies of system responses of some lateral dynamic indices at low frequency.

  20. Motion tracking in narrow spaces: A structured light approach

    DEFF Research Database (Denmark)

    Olesen, Oline Vinter; Paulsen, Rasmus Reinhold; Højgaard, Liselotte

    2010-01-01

    We present a novel tracking system for patient head motion inside 3D medical scanners. Currently, the system is targeted at the Siemens High Resolution Research Tomograph (HRRT) PET scanner. Partial face surfaces are reconstructed using a miniaturized structured light system. The reconstructed 3D...

  1. Tracking and tracing: a structure for development and contemporary practices

    NARCIS (Netherlands)

    Dorp, van K.J.

    2002-01-01


    Although government and business interest in tracking and tracing has grown enormously over the last decade, a clear and coherent overview of the topic is still lacking and is not found in (logistics) literature. This article presents a structure for development and contemporary practices of

  2. Heavy ions track structure in a PETP

    Science.gov (United States)

    Ciesla, K.; Starosta, W.

    1995-11-01

    Differential scanning calorimetry (DSC) studies of poly(ethylenetherephtalate) (PETP) film irradiated with high energy heavy ions at high ions fluencies are reported. Thin Mylar and Hostaphan PETP films (23 μm or 19 μm thick) were irradiated with Ar, Dy and Pb ions of the following energies and ions fluencies: Ar - 5.5 MeV/amu, 6 × 10 11ions/cm 2; Dy - 13 MeV/amu, 5 × 10 10ions/cm 2 and ca. 10 11 ions/cm 2; Pb - 11.4 MeV/amu, 10 10 ions/cm 2. DSC measurements were performed in nitrogen during heating-cooling-heating cycles at heating-cooling-heating rates of: 10-10-10°/min and 2-20-2°/min. Significant differences between pristine and the irradiated material were observed during melting and recrystallization processes occurring on primary heating, cooling and secondary heating. They have been attributed to film amorphization during heavy ion irradiation as a result of degradation and crosslinking, confirmed by gel permeation chromatography (GPC). The decrease in crystallinity and disappearance of long range order in the highly irradiated samples have been confirmed by wide and small angle X-ray scattering (WAXS, SAXS) results and density measurements. This can also be concluded on the basis of IR spectroscopy patterns. The DSC method can be applied in studies of structural changes occurring in thin polymer films after heavy ion irradiation.

  3. START: a system for flexible analysis of hundreds of genomic signal tracks in few lines of SQL-like queries

    OpenAIRE

    Zhu, Xinjie; Zhang, Qiang; Ho, Eric Dun; Yu, Ken Hung-On; Liu, Chris; Huang, Tim H.; Cheng, Alfred Sze-Lok; Kao, Ben; Lo, Eric; Yip, Kevin Y.

    2017-01-01

    Background A genomic signal track is a set of genomic intervals associated with values of various types, such as measurements from high-throughput experiments. Analysis of signal tracks requires complex computational methods, which often make the analysts focus too much on the detailed computational steps rather than on their biological questions. Results Here we propose Signal Track Query Language (STQL) for simple analysis of signal tracks. It is a Structured Query Language (SQL)-like decla...

  4. Structure preserving clustering-object tracking via subgroup motion pattern segmentation

    Science.gov (United States)

    Fan, Zheyi; Zhu, Yixuan; Jiang, Jiao; Weng, Shuqin; Liu, Zhiwen

    2018-01-01

    Tracking clustering objects with similar appearances simultaneously in collective scenes is a challenging task in the field of collective motion analysis. Recent work on clustering-object tracking often suffers from poor tracking accuracy and terrible real-time performance due to the neglect or the misjudgment of the motion differences among objects. To address this problem, we propose a subgroup motion pattern segmentation framework based on a multilayer clustering structure and establish spatial constraints only among objects in the same subgroup, which entails having consistent motion direction and close spatial position. In addition, the subgroup segmentation results are updated dynamically because crowd motion patterns are changeable and affected by objects' destinations and scene structures. The spatial structure information combined with the appearance similarity information is used in the structure preserving object tracking framework to track objects. Extensive experiments conducted on several datasets containing multiple real-world crowd scenes validate the accuracy and the robustness of the presented algorithm for tracking objects in collective scenes.

  5. Structure-aware Local Sparse Coding for Visual Tracking

    KAUST Repository

    Qi, Yuankai

    2018-01-24

    Sparse coding has been applied to visual tracking and related vision problems with demonstrated success in recent years. Existing tracking methods based on local sparse coding sample patches from a target candidate and sparsely encode these using a dictionary consisting of patches sampled from target template images. The discriminative strength of existing methods based on local sparse coding is limited as spatial structure constraints among the template patches are not exploited. To address this problem, we propose a structure-aware local sparse coding algorithm which encodes a target candidate using templates with both global and local sparsity constraints. For robust tracking, we show local regions of a candidate region should be encoded only with the corresponding local regions of the target templates that are the most similar from the global view. Thus, a more precise and discriminative sparse representation is obtained to account for appearance changes. To alleviate the issues with tracking drifts, we design an effective template update scheme. Extensive experiments on challenging image sequences demonstrate the effectiveness of the proposed algorithm against numerous stateof- the-art methods.

  6. Object tracking by occlusion detection via structured sparse learning

    KAUST Repository

    Zhang, Tianzhu

    2013-06-01

    Sparse representation based methods have recently drawn much attention in visual tracking due to good performance against illumination variation and occlusion. They assume the errors caused by image variations can be modeled as pixel-wise sparse. However, in many practical scenarios these errors are not truly pixel-wise sparse but rather sparsely distributed in a structured way. In fact, pixels in error constitute contiguous regions within the object\\'s track. This is the case when significant occlusion occurs. To accommodate for non-sparse occlusion in a given frame, we assume that occlusion detected in previous frames can be propagated to the current one. This propagated information determines which pixels will contribute to the sparse representation of the current track. In other words, pixels that were detected as part of an occlusion in the previous frame will be removed from the target representation process. As such, this paper proposes a novel tracking algorithm that models and detects occlusion through structured sparse learning. We test our tracker on challenging benchmark sequences, such as sports videos, which involve heavy occlusion, drastic illumination changes, and large pose variations. Experimental results show that our tracker consistently outperforms the state-of-the-art. © 2013 IEEE.

  7. Occlusion detection via structured sparse learning for robust object tracking

    KAUST Repository

    Zhang, Tianzhu

    2014-01-01

    Sparse representation based methods have recently drawn much attention in visual tracking due to good performance against illumination variation and occlusion. They assume the errors caused by image variations can be modeled as pixel-wise sparse. However, in many practical scenarios, these errors are not truly pixel-wise sparse but rather sparsely distributed in a structured way. In fact, pixels in error constitute contiguous regions within the object’s track. This is the case when significant occlusion occurs. To accommodate for nonsparse occlusion in a given frame, we assume that occlusion detected in previous frames can be propagated to the current one. This propagated information determines which pixels will contribute to the sparse representation of the current track. In other words, pixels that were detected as part of an occlusion in the previous frame will be removed from the target representation process. As such, this paper proposes a novel tracking algorithm that models and detects occlusion through structured sparse learning. We test our tracker on challenging benchmark sequences, such as sports videos, which involve heavy occlusion, drastic illumination changes, and large pose variations. Extensive experimental results show that our proposed tracker consistently outperforms the state-of-the-art trackers.

  8. Single Molecule Analysis of Resection Tracks.

    Science.gov (United States)

    Huertas, Pablo; Cruz-García, Andrés

    2018-01-01

    Homologous recombination is initiated by the so-called DNA end resection, the 5'-3' nucleolytic degradation of a single strand of the DNA at each side of the break. The presence of resected DNA is an obligatory step for homologous recombination. Moreover, the amount of resected DNA modulates the prevalence of different recombination pathways. In different model organisms, there are several published ways to visualize and measure with more or less detail the amount of DNA resected. In human cells, however, technical constraints hampered the study of resection at high resolution. Some information might be gathered from the study of endonuclease-created DSBs, in which the resection of breaks at known sites can be followed by PCR or ChIP. In this chapter, we describe in detail a novel assay to study DNA end resection in breaks located on unknown positions. Here, we use ionizing radiation to induce double-strand breaks, but the same approach can be used to monitor resection induced by different DNA damaging agents. By modifying the DNA-combing technique, used for high-resolution replication analyses, we can measure resection progression at the level of individual DNA fibers. Thus, we named the method Single Molecule Analysis of Resection Tracks (SMART). We use human cells in culture as a model system, but in principle the same approach would be feasible to any model organism adjusting accordingly the DNA isolation part of the protocol.

  9. Robust visual tracking via structured multi-task sparse learning

    KAUST Repository

    Zhang, Tianzhu

    2012-11-09

    In this paper, we formulate object tracking in a particle filter framework as a structured multi-task sparse learning problem, which we denote as Structured Multi-Task Tracking (S-MTT). Since we model particles as linear combinations of dictionary templates that are updated dynamically, learning the representation of each particle is considered a single task in Multi-Task Tracking (MTT). By employing popular sparsity-inducing lp,q mixed norms (specifically p∈2,∞ and q=1), we regularize the representation problem to enforce joint sparsity and learn the particle representations together. As compared to previous methods that handle particles independently, our results demonstrate that mining the interdependencies between particles improves tracking performance and overall computational complexity. Interestingly, we show that the popular L1 tracker (Mei and Ling, IEEE Trans Pattern Anal Mach Intel 33(11):2259-2272, 2011) is a special case of our MTT formulation (denoted as the L11 tracker) when p=q=1. Under the MTT framework, some of the tasks (particle representations) are often more closely related and more likely to share common relevant covariates than other tasks. Therefore, we extend the MTT framework to take into account pairwise structural correlations between particles (e.g. spatial smoothness of representation) and denote the novel framework as S-MTT. The problem of learning the regularized sparse representation in MTT and S-MTT can be solved efficiently using an Accelerated Proximal Gradient (APG) method that yields a sequence of closed form updates. As such, S-MTT and MTT are computationally attractive. We test our proposed approach on challenging sequences involving heavy occlusion, drastic illumination changes, and large pose variations. Experimental results show that S-MTT is much better than MTT, and both methods consistently outperform state-of-the-art trackers. © 2012 Springer Science+Business Media New York.

  10. Application of fission track analysis to hydrocarbon exploration

    International Nuclear Information System (INIS)

    Duddy, I.R.; Green, P.F.; Gleadow, A.J.W.; Marshallsea, S.; Tingate, P.; Laslett, G.M.; Hegarty, K.A.; Lovering, J.F.

    1985-01-01

    The temperature range over which fission tracks in apatite show observable annealing effects coincides with that responsible for the maximum generation of liquid hydrocarbons. Work is currently in progress in a number of Australian and overseas sedimentary basins, applying Apatite Fission Track Analysis (AFTA) to investigate the thermal evolution of these hydrocarbon prospective regions

  11. Eye tracking detects disconjugate eye movements associated with structural traumatic brain injury and concussion.

    Science.gov (United States)

    Samadani, Uzma; Ritlop, Robert; Reyes, Marleen; Nehrbass, Elena; Li, Meng; Lamm, Elizabeth; Schneider, Julia; Shimunov, David; Sava, Maria; Kolecki, Radek; Burris, Paige; Altomare, Lindsey; Mehmood, Talha; Smith, Theodore; Huang, Jason H; McStay, Christopher; Todd, S Rob; Qian, Meng; Kondziolka, Douglas; Wall, Stephen; Huang, Paul

    2015-04-15

    Disconjugate eye movements have been associated with traumatic brain injury since ancient times. Ocular motility dysfunction may be present in up to 90% of patients with concussion or blast injury. We developed an algorithm for eye tracking in which the Cartesian coordinates of the right and left pupils are tracked over 200 sec and compared to each other as a subject watches a short film clip moving inside an aperture on a computer screen. We prospectively eye tracked 64 normal healthy noninjured control subjects and compared findings to 75 trauma subjects with either a positive head computed tomography (CT) scan (n=13), negative head CT (n=39), or nonhead injury (n=23) to determine whether eye tracking would reveal the disconjugate gaze associated with both structural brain injury and concussion. Tracking metrics were then correlated to the clinical concussion measure Sport Concussion Assessment Tool 3 (SCAT3) in trauma patients. Five out of five measures of horizontal disconjugacy were increased in positive and negative head CT patients relative to noninjured control subjects. Only one of five vertical disconjugacy measures was significantly increased in brain-injured patients relative to controls. Linear regression analysis of all 75 trauma patients demonstrated that three metrics for horizontal disconjugacy negatively correlated with SCAT3 symptom severity score and positively correlated with total Standardized Assessment of Concussion score. Abnormal eye-tracking metrics improved over time toward baseline in brain-injured subjects observed in follow-up. Eye tracking may help quantify the severity of ocular motility disruption associated with concussion and structural brain injury.

  12. A dynamic wheel-rail impact analysis of railway track under wheel flat by finite element analysis

    Science.gov (United States)

    Bian, Jian; Gu, Yuantong; Murray, Martin Howard

    2013-06-01

    Wheel-rail interaction is one of the most important research topics in railway engineering. It involves track impact response, track vibration and track safety. Track structure failures caused by wheel-rail impact forces can lead to significant economic loss for track owners through damage to rails and to the sleepers beneath. Wheel-rail impact forces occur because of imperfections in the wheels or rails such as wheel flats, irregular wheel profiles, rail corrugations and differences in the heights of rails connected at a welded joint. A wheel flat can cause a large dynamic impact force as well as a forced vibration with a high frequency, which can cause damage to the track structure. In the present work, a three-dimensional finite element (FE) model for the impact analysis induced by the wheel flat is developed by the use of the FE analysis (FEA) software package ANSYS and validated by another validated simulation. The effect of wheel flats on impact forces is thoroughly investigated. It is found that the presence of a wheel flat will significantly increase the dynamic impact force on both rail and sleeper. The impact force will monotonically increase with the size of wheel flats. The relationships between the impact force and the wheel flat size are explored from this FEA and they are important for track engineers to improve their understanding of the design and maintenance of the track system.

  13. Stochastic radial dose distributions and track structure theory.

    Science.gov (United States)

    Schmollack, J U; Klaumuenzer, S L; Kiefer, J

    2000-04-01

    Measured single-event distributions of the specific energy deposited in cylindrical volumes with simulated diameters down to 150 nm for (4)He and (12)C ions with energies of 25 MeV/nucleon and (16)O ions with 21 MeV/nucleon and radial distances up to 12 microm are presented. The mean specific energy per ion , the mean specific energy per target hit z(1)(r), and the relative frequency of target hits nu(r) as a function of radial distance are evaluated and compared with the corresponding quantities of the track structure model of Kiefer and Straaten (Phys. Med. Biol. 31, 1201-1209, 1986). Though there are some discrepancies in the absolute values, the radial dependence of , z(1)(r) and v(r) for (12)C and (16)O ions is reproduced satisfactorily. The model fails to describe the data for (4)He ions. A more detailed comparison of the radial shape of the mean specific energies calculated from the experimental data from the present work and data from the literature reveals a significant projectile charge dependence which is not included in track structure models.

  14. Computer image analysis of etched tracks from ionizing radiation

    Science.gov (United States)

    Blanford, George E.

    1994-01-01

    I proposed to continue a cooperative research project with Dr. David S. McKay concerning image analysis of tracks. Last summer we showed that we could measure track densities using the Oxford Instruments eXL computer and software that is attached to an ISI scanning electron microscope (SEM) located in building 31 at JSC. To reduce the dependence on JSC equipment, we proposed to transfer the SEM images to UHCL for analysis. Last summer we developed techniques to use digitized scanning electron micrographs and computer image analysis programs to measure track densities in lunar soil grains. Tracks were formed by highly ionizing solar energetic particles and cosmic rays during near surface exposure on the Moon. The track densities are related to the exposure conditions (depth and time). Distributions of the number of grains as a function of their track densities can reveal the modality of soil maturation. As part of a consortium effort to better understand the maturation of lunar soil and its relation to its infrared reflectance properties, we worked on lunar samples 67701,205 and 61221,134. These samples were etched for a shorter time (6 hours) than last summer's sample and this difference has presented problems for establishing the correct analysis conditions. We used computer counting and measurement of area to obtain preliminary track densities and a track density distribution that we could interpret for sample 67701,205. This sample is a submature soil consisting of approximately 85 percent mature soil mixed with approximately 15 percent immature, but not pristine, soil.

  15. Automatic tracking of vessel-like structures from a single starting point.

    Science.gov (United States)

    Oliveira, Dário Augusto Borges; Leal-Taixé, Laura; Feitosa, Raul Queiroz; Rosenhahn, Bodo

    2016-01-01

    The identification of vascular networks is an important topic in the medical image analysis community. While most methods focus on single vessel tracking, the few solutions that exist for tracking complete vascular networks are usually computationally intensive and require a lot of user interaction. In this paper we present a method to track full vascular networks iteratively using a single starting point. Our approach is based on a cloud of sampling points distributed over concentric spherical layers. We also proposed a vessel model and a metric of how well a sample point fits this model. Then, we implement the network tracking as a min-cost flow problem, and propose a novel optimization scheme to iteratively track the vessel structure by inherently handling bifurcations and paths. The method was tested using both synthetic and real images. On the 9 different data-sets of synthetic blood vessels, we achieved maximum accuracies of more than 98%. We further use the synthetic data-set to analyze the sensibility of our method to parameter setting, showing the robustness of the proposed algorithm. For real images, we used coronary, carotid and pulmonary data to segment vascular structures and present the visual results. Still for real images, we present numerical and visual results for networks of nerve fibers in the olfactory system. Further visual results also show the potential of our approach for identifying vascular networks topologies. The presented method delivers good results for the several different datasets tested and have potential for segmenting vessel-like structures. Also, the topology information, inherently extracted, can be used for further analysis to computed aided diagnosis and surgical planning. Finally, the method's modular aspect holds potential for problem-oriented adjustments and improvements. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. An Analysis Technique/Automated Tool for Comparing and Tracking Analysis Modes of Different Finite Element Models

    Science.gov (United States)

    Towner, Robert L.; Band, Jonathan L.

    2012-01-01

    An analysis technique was developed to compare and track mode shapes for different Finite Element Models. The technique may be applied to a variety of structural dynamics analyses, including model reduction validation (comparing unreduced and reduced models), mode tracking for various parametric analyses (e.g., launch vehicle model dispersion analysis to identify sensitivities to modal gain for Guidance, Navigation, and Control), comparing models of different mesh fidelity (e.g., a coarse model for a preliminary analysis compared to a higher-fidelity model for a detailed analysis) and mode tracking for a structure with properties that change over time (e.g., a launch vehicle from liftoff through end-of-burn, with propellant being expended during the flight). Mode shapes for different models are compared and tracked using several numerical indicators, including traditional Cross-Orthogonality and Modal Assurance Criteria approaches, as well as numerical indicators obtained by comparing modal strain energy and kinetic energy distributions. This analysis technique has been used to reliably identify correlated mode shapes for complex Finite Element Models that would otherwise be difficult to compare using traditional techniques. This improved approach also utilizes an adaptive mode tracking algorithm that allows for automated tracking when working with complex models and/or comparing a large group of models.

  17. Recent Results from CHAMP Tracking and Accelerometer Data Analysis

    Science.gov (United States)

    Luthcke, S. B.; Rowlands, D. D.; Lemoine, F. G.; Nerem, R. S.; Thompson, B.; Pavlis, E.; Williams, T. A.; Colombo, O. L.; Chao, Benjamin F. (Technical Monitor)

    2002-01-01

    The CHAMP mission's unique combination of sensors and orbit configuration will enable unprecedented improvements in modeling and understanding the Earth's static gravity field and its temporal variations. CHAMP is the first of two missions (GRACE to be launched in the early part of 02') that combine a new generation of Global Positioning System (GPS) receivers, a high precision three-axis accelerometer, and star cameras for the precision attitude determination. In order to isolate the gravity signal for science investigations, it is necessary to perform a detailed reduction and analysis of the GPS and Satellite Laser Ranging (SLR) tracking data in conjunction with the accelerometer and attitude data. Precision orbit determination based on the GPS and SLR tracking data will isolate the orbit perturbations, while the accelerometer data will be used to distinguish the non-gravitational forces from those due to the geopotential (static, and time varying). In preparation for the CHAMP and GRACE missions, extensive modifications have been made to NASA/GSFC's GEODYN orbit determination software to enable the simultaneous reduction of spacecraft tracking (e.g. GPS and SLR), three-axis accelerometer and precise attitude data. Several weeks of CHAMP tracking and accelerometer data have been analyzed and the results will be presented. Precision orbit determination analysis based on tracking data alone in addition to results based on the simultaneous reduction of tracking and accelerometer data will be discussed. Results from a calibration of the accelerometer will be presented along with the results from various orbit determination strategies.

  18. High throughput inclusion body sizing: Nano particle tracking analysis.

    Science.gov (United States)

    Reichelt, Wieland N; Kaineder, Andreas; Brillmann, Markus; Neutsch, Lukas; Taschauer, Alexander; Lohninger, Hans; Herwig, Christoph

    2017-06-01

    The expression of pharmaceutical relevant proteins in Escherichia coli frequently triggers inclusion body (IB) formation caused by protein aggregation. In the scientific literature, substantial effort has been devoted to the quantification of IB size. However, particle-based methods used up to this point to analyze the physical properties of representative numbers of IBs lack sensitivity and/or orthogonal verification. Using high pressure freezing and automated freeze substitution for transmission electron microscopy (TEM) the cytosolic inclusion body structure was preserved within the cells. TEM imaging in combination with manual grey scale image segmentation allowed the quantification of relative areas covered by the inclusion body within the cytosol. As a high throughput method nano particle tracking analysis (NTA) enables one to derive the diameter of inclusion bodies in cell homogenate based on a measurement of the Brownian motion. The NTA analysis of fixated (glutaraldehyde) and non-fixated IBs suggests that high pressure homogenization annihilates the native physiological shape of IBs. Nevertheless, the ratio of particle counts of non-fixated and fixated samples could potentially serve as factor for particle stickiness. In this contribution, we establish image segmentation of TEM pictures as an orthogonal method to size biologic particles in the cytosol of cells. More importantly, NTA has been established as a particle-based, fast and high throughput method (1000-3000 particles), thus constituting a much more accurate and representative analysis than currently available methods. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. WE-D-BRF-01: FEATURED PRESENTATION - Investigating Particle Track Structures Using Fluorescent Nuclear Track Detectors and Monte Carlo Simulations

    International Nuclear Information System (INIS)

    Dowdell, S; Paganetti, H; Schuemann, J; Greilich, S; Zimmerman, F; Evans, C

    2014-01-01

    Purpose: To report on the efforts funded by the AAPM seed funding grant to develop the basis for fluorescent nuclear track detector (FNTD) based radiobiological experiments in combination with dedicated Monte Carlo simulations (MCS) on the nanometer scale. Methods: Two confocal microscopes were utilized in this study. Two FNTD samples were used to find the optimal microscope settings, one FNTD irradiated with 11.1 MeV/u Gold ions and one irradiated with 428.77 MeV/u Carbon ions. The first sample provided a brightly luminescent central track while the latter is used to test the capabilities to observe secondary electrons. MCS were performed using TOPAS beta9 version, layered on top of Geant4.9.6p02. Two sets of simulations were performed, one with the Geant4-DNA physics list and approximating the FNTDs by water, a second set using the Penelope physics list in a water-approximated FNTD and a aluminum-oxide FNTD. Results: Within the first half of the funding period, we have successfully established readout capabilities of FNTDs at our institute. Due to technical limitations, our microscope setup is significantly different from the approach implemented at the DKFZ, Germany. However, we can clearly reconstruct Carbon tracks in 3D with electron track resolution of 200 nm. A second microscope with superior readout capabilities will be tested in the second half of the funding period, we expect an improvement in signal to background ratio with the same the resolution.We have successfully simulated tracks in FNTDs. The more accurate Geant4-DNA track simulations can be used to reconstruct the track energy from the size and brightness of the observed tracks. Conclusion: We have achieved the goals set in the seed funding proposal: the setup of FNTD readout and simulation capabilities. We will work on improving the readout resolution to validate our MCS track structures down to the nanometer scales

  20. Effectiveness of an Automatic Tracking Software in Underwater Motion Analysis

    Directory of Open Access Journals (Sweden)

    Fabrício A. Magalhaes

    2013-12-01

    Full Text Available Tracking of markers placed on anatomical landmarks is a common practice in sports science to perform the kinematic analysis that interests both athletes and coaches. Although different software programs have been developed to automatically track markers and/or features, none of them was specifically designed to analyze underwater motion. Hence, this study aimed to evaluate the effectiveness of a software developed for automatic tracking of underwater movements (DVP, based on the Kanade-Lucas-Tomasi feature tracker. Twenty-one video recordings of different aquatic exercises (n = 2940 markers’ positions were manually tracked to determine the markers’ center coordinates. Then, the videos were automatically tracked using DVP and a commercially available software (COM. Since tracking techniques may produce false targets, an operator was instructed to stop the automatic procedure and to correct the position of the cursor when the distance between the calculated marker’s coordinate and the reference one was higher than 4 pixels. The proportion of manual interventions required by the software was used as a measure of the degree of automation. Overall, manual interventions were 10.4% lower for DVP (7.4% than for COM (17.8%. Moreover, when examining the different exercise modes separately, the percentage of manual interventions was 5.6% to 29.3% lower for DVP than for COM. Similar results were observed when analyzing the type of marker rather than the type of exercise, with 9.9% less manual interventions for DVP than for COM. In conclusion, based on these results, the developed automatic tracking software presented can be used as a valid and useful tool for underwater motion analysis.

  1. ON THE ANALYSIS OF BUBBLE CHAMBER TRACKS

    International Nuclear Information System (INIS)

    Bradner, H.; Solmitz, F.

    1958-01-01

    Since its invention by Glaser in 1953, the bubble chamber has become a most valuable tool in high-energy physics. It combines a number of advantages of various older methods of particle detection: it offers high spatial resolution, rapid accumulation of data, some time resolution, and some choice of the nucleus whose interaction one wants to study (bubble chambers have been made to operate with a large number of different liquids, including H 2 , D 2 , He, Xe, and several hydrocarbons). In order to exploit the advantages of spatial resolution and rapid data accumulation, high-speed high-precision analysis procedures must be developed. In this article they discuss some of the problems posed by such analysis. The discussion is based largely on experience gained in performing hydrogen bubble chamber experiments with the University of California's Bevatron (6-Bev proton synchrotron)

  2. Marksmanship Aiming and Tracking Analysis System

    Science.gov (United States)

    1991-06-01

    37 BLANKS(9) " 138 BLW $(10) = a 󈧫 BLA .$(11) =i 140 BLANKS(12) - 141 BLANK$(1=3) 142 BLP•K$(14) = u " 143 BLANKS(15) = • BLAM($(16) = ’ 145 SLANW1K...GRAPHIC ANALYSIS CARTESIAN GRAPH 10613 10M28 LOCATE 6, 3 10632 PRINT ".I81: 10648 LOLATE 11,3 1 vim PRINT ".6" las5 LOCATE 13.3 1656 PRINT ’PH" 10669

  3. Sensitivity analysis of railpad parameters on vertical railway track dynamics

    NARCIS (Netherlands)

    Oregui Echeverria-Berreyarza, M.; Nunez Vicencio, Alfredo; Dollevoet, R.P.B.J.; Li, Z.

    2016-01-01

    This paper presents a sensitivity analysis of railpad parameters on vertical railway track dynamics, incorporating the nonlinear behavior of the fastening (i.e., downward forces compress the railpad whereas upward forces are resisted by the clamps). For this purpose, solid railpads, rail-railpad

  4. Dimensional Analysis Keeping Track of Length, Mass, Time

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 11. Dimensional Analysis Keeping Track of Length, Mass, Time. Nagesha N Rao. General Article Volume 1 Issue 11 November 1996 pp 29-41. Fulltext. Click here to view fulltext PDF. Permanent link:

  5. Visual Tracking via Feature Tensor Multimanifold Discriminate Analysis

    Directory of Open Access Journals (Sweden)

    Ting-quan Deng

    2014-01-01

    Full Text Available In the visual tracking scenarios, if there are multiple objects, due to the interference of similar objects, tracking may fail in the progress of occlusion to separation. To address this problem, this paper proposed a visual tracking algorithm with discrimination through multimanifold learning. Color-gradient-based feature tensor was used to describe object appearance for accommodation of partial occlusion. A prior multimanifold tensor dataset is established through the template matching tracking algorithm. For the purpose of discrimination, tensor distance was defined to determine the intramanifold and intermanifold neighborhood relationship in multimanifold space. Then multimanifold discriminate analysis was employed to construct multilinear projection matrices of submanifolds. Finally, object states were obtained by combining with sequence inference. Meanwhile, the multimanifold dataset and manifold learning embedded projection should be updated online. Experiments were conducted on two real visual surveillance sequences to evaluate the proposed algorithm with three state-of-the-art tracking methods qualitatively and quantitatively. Experimental results show that the proposed algorithm can achieve effective and robust effect in multi-similar-object mutual occlusion scenarios.

  6. Optimal structural design of a 5-kW CPV tracking system by considering the ISO 4017/4762 standard through structure and flow simulations

    Science.gov (United States)

    Lee, Hyo Geun; Kim, Sang Suk; Kim, Sung Jo; Park, Su-Jin; Yun, Chang-wuk; Im, Gil-pyeong

    2015-09-01

    Photovoltaic generation systems have disadvantage in that they are usually installed outdoors and are exposed to extreme environments such as wind, snow and rain loadings. The structure of a photovoltaic generation system should be designed to have sufficient stiffness and strength against such loads. Especially, electric power generation by a concentrator photovoltaic(CPV) system can produce enough power if a right angle is main fained between the solar and the CPV panel within 90° ± 1°. To make the CPV tracking system in this study, we designed the structure by calculating the variations in and the strees applied to the structure by the wind load when the CPV tracking was influenced by the wind load. In this study, a 5-kW CPV tracking structure was designed through a structural analysis and a finiteelement analysis for a wind speed of 65 m/s by using ANSYS. The simulation of the structural design showed that the, structure of the 5-kW CPV tracking system corresponded with the ISO4017/ISO4762 standard. Based on this research, we will produce a 5-kW CPV tracking system and proceed to field test.

  7. On the structure of etched ion tracks in polymers

    Czech Academy of Sciences Publication Activity Database

    Hnatowicz, Vladimír; Vacík, Jiří; Apel, P. Yu.

    2016-01-01

    Roč. 121, APR (2016), s. 106-109 ISSN 0969-806X R&D Projects: GA ČR(CZ) GBP108/12/G108; GA MŠk(CZ) LM2011019 Institutional support: RVO:61389005 Keywords : polymers * ion tracks * track etching Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.315, year: 2016

  8. Correlation analysis between ionospheric scintillation levels and receiver tracking performance

    Science.gov (United States)

    Sreeja, V.; Aquino, M.; Elmas, Z. G.; Forte, B.

    2012-06-01

    Rapid fluctuations in the amplitude and phase of a transionospheric radio signal caused by small scale plasma density irregularities in the ionosphere are known as scintillation. Scintillation can seriously impair a GNSS (Global Navigation Satellite Systems) receiver tracking performance, thus affecting the required levels of availability, accuracy and integrity, and consequently the reliability of modern day GNSS based applications. This paper presents an analysis of correlation between scintillation levels and tracking performance of a GNSS receiver for GPS L1C/A, L2C and GLONASS L1, L2 signals. The analyses make use of data recorded over Presidente Prudente (22.1°S, 51.4°W, dip latitude ˜12.3°S) in Brazil, a location close to the Equatorial Ionisation Anomaly (EIA) crest in Latin America. The study presents for the first time this type of correlation analysis for GPS L2C and GLONASS L1, L2 signals. The scintillation levels are defined by the amplitude scintillation index, S4 and the receiver tracking performance is evaluated by the phase tracking jitter. Both S4 and the phase tracking jitter are estimated from the post correlation In-Phase (I) and Quadra-Phase (Q) components logged by the receiver at a high rate. Results reveal that the dependence of the phase tracking jitter on the scintillation levels can be represented by a quadratic fit for the signals. The results presented in this paper are of importance to GNSS users, especially in view of the forthcoming high phase of solar cycle 24 (predicted for 2013).

  9. Single Particle Tracking: Analysis Techniques for Live Cell Nanoscopy

    Science.gov (United States)

    Relich, Peter Kristopher, II

    Single molecule experiments are a set of experiments designed specifically to study the properties of individual molecules. It has only been in the last three decades where single molecule experiments have been applied to the life sciences; where they have been successfully implemented in systems biology for probing the behaviors of sub-cellular mechanisms. The advent and growth of super-resolution techniques in single molecule experiments has made the fundamental behaviors of light and the associated nano-probes a necessary concern amongst life scientists wishing to advance the state of human knowledge in biology. This dissertation disseminates some of the practices learned in experimental live cell microscopy. The topic of single particle tracking is addressed here in a format that is designed for the physicist who embarks upon single molecule studies. Specifically, the focus is on the necessary procedures to generate single particle tracking analysis techniques that can be implemented to answer biological questions. These analysis techniques range from designing and testing a particle tracking algorithm to inferring model parameters once an image has been processed. The intellectual contributions of the author include the techniques in diffusion estimation, localization filtering, and trajectory associations for tracking which will all be discussed in detail in later chapters. The author of this thesis has also contributed to the software development of automated gain calibration, live cell particle simulations, and various single particle tracking packages. Future work includes further evaluation of this laboratory's single particle tracking software, entropy based approaches towards hypothesis validations, and the uncertainty quantification of gain calibration.

  10. Extending Track Analysis from Animals in the Lab to Moving Objects Anywhere

    NARCIS (Netherlands)

    Dommelen, W. van; Laar, P.J.L.J. van de; Noldus, L.P.J.J.

    2013-01-01

    In this chapter we compare two application domains in which the tracking of objects and the analysis of their movements are core activities, viz. animal tracking and vessel tracking. More specifically, we investigate whether EthoVision XT, a research tool for video tracking and analysis of the

  11. Evaluation of nanoparticle tracking analysis for total virus particle determination

    Directory of Open Access Journals (Sweden)

    Kramberger Petra

    2012-11-01

    Full Text Available Abstract The NanoSight LM10 with Nanoparticle tracking analysis (NTA software was evaluated for the quantification of latex particles, adenovirus 5, and influenza virus. The inter-day variability was determined by measuring the same sample over several consecutive days and the method’s accuracy was demonstrated by using known concentrations of the subject particles. NTA analysis was also used to quantify chromatographic fractions of adenovirus and influenza virus after purification on a CIM monolithic column. NTA results were compared and evaluated against hemagglutination (HA and end point dilution assay, determining total and infection virus particle number, respectively. The results demonstrated that nanoparticle tracking analysis is a method for fast estimation of virus concentration in different samples. In addition, it can provide a better insight into the sample status, regarding the level of virus aggregation.

  12. Dual linear structured support vector machine tracking method via scale correlation filter

    Science.gov (United States)

    Li, Weisheng; Chen, Yanquan; Xiao, Bin; Feng, Chen

    2018-01-01

    Adaptive tracking-by-detection methods based on structured support vector machine (SVM) performed well on recent visual tracking benchmarks. However, these methods did not adopt an effective strategy of object scale estimation, which limits the overall tracking performance. We present a tracking method based on a dual linear structured support vector machine (DLSSVM) with a discriminative scale correlation filter. The collaborative tracker comprised of a DLSSVM model and a scale correlation filter obtains good results in tracking target position and scale estimation. The fast Fourier transform is applied for detection. Extensive experiments show that our tracking approach outperforms many popular top-ranking trackers. On a benchmark including 100 challenging video sequences, the average precision of the proposed method is 82.8%.

  13. Instrumentation by accelerometers and distributed optical fiber sensors of a real ballastless track structure

    OpenAIRE

    CHAPELEAU, Xavier; COTTINEAU, Louis-Marie; SEDRAN, Thierry; CAILLIAU, Joël; GUEGUEN, Ivan; DUMOULIN, Jean

    2015-01-01

    While relatively expensive to build, ballastless track structures are presently seen as an attractive alternative to conventional ballast. Firstly, they are built quickly since the slabs can be cast in place in an automated fashion by a slipform paver. Secondly, with its service life of at least 60 years, they requires little maintenance and hence they offers great availability. Other reasons for using ballastless tracks instead of ballasted tracks are the lack of suitable ballast material an...

  14. Tropical Cyclone Intensity, Structure and Track Observed with Multi-Satellite Sensors

    Science.gov (United States)

    Yang, S.; Cossuth, J.; Richardson, K.; Surratt, M. L.; Bankert, R.

    2016-12-01

    Tropical cyclones (TCs) are among the most severe weather systems and can lead to catastrophic damage to human lives, properties, and society. A TC's intensity, structure and track are the major parameters for weather forecasts of TC activities. Satellite sensors provide the only method of global, near real-time observations of TC life cycles. Passive microwave sensors, such as Advanced Microwave Scanning Radiometer 2 (AMSR-2), Global Precipitation Measurement microwave imager (GMI), and Special Sensor Microwave Imager/Sounder (SSMIS), can present accurate analysis of TC intensity, center position, eyewall, and spiral convection zones because of the ability for microwave frequencies to penetrate clouds and observe hydrometeor structure. Multi-satellite sensors are required to provide a near real-time global coverage of TCs because each Low Earth Orbit (LEO) sensor can make observations twice per day over a given location. The Naval Research Laboratory-Monterey (NRL-MRY) TC web page is the one-stop site where people can search for all available TC microwave sensor observations and associated numerical weather prediction (NWP) TC forecasts for current TCs and historical TC datasets. This TC web page can provide information of near real-time TC observations and predictions for local/regional managements to make better decisions on mitigating potential TC damages. This presentation will describe recent advances on the rich resources of satellite-based TC observations and related NWP forecasts on the NRL-MRY TC web page, including the inter-sensor calibration on frequency shift between sensors for consistent view of TC brightness temperatures (TBs) among these sensors, recenter of TC position with the Automated Rotational Center Hurricane Eye Retrieval (ARCHER) algorithm, and a new interpolation scheme to create a unified TC TB database. An improved TC track analysis and TC diurnal properties with this new TC TB database will also be presented and discussed for better

  15. High-speed evaluation of track-structure Monte Carlo electron transport simulations.

    Science.gov (United States)

    Pasciak, A S; Ford, J R

    2008-10-07

    There are many instances where Monte Carlo simulation using the track-structure method for electron transport is necessary for the accurate analytical computation and estimation of dose and other tally data. Because of the large electron interaction cross-sections and highly anisotropic scattering behavior, the track-structure method requires an enormous amount of computation time. For microdosimetry, radiation biology and other applications involving small site and tally sizes, low electron energies or high-Z/low-Z material interfaces where the track-structure method is preferred, a computational device called a field-programmable gate array (FPGA) is capable of executing track-structure Monte Carlo electron-transport simulations as fast as or faster than a standard computer can complete an identical simulation using the condensed history (CH) technique. In this paper, data from FPGA-based track-structure electron-transport computations are presented for five test cases, from simple slab-style geometries to radiation biology applications involving electrons incident on endosteal bone surface cells. For the most complex test case presented, an FPGA is capable of evaluating track-structure electron-transport problems more than 500 times faster than a standard computer can perform the same track-structure simulation and with comparable accuracy.

  16. Renewable Energy Finance Tracking Initiative (REFTI) Solar Trend Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hubbell, R.; Lowder, T.; Mendelsohn, M.; Cory, K.

    2012-09-01

    This report is a summary of the finance trends for small-scale solar photovoltaic (PV) projects (PV <1 MW), large-scale PV projects (PV greater than or equal to 1 MW), and concentrated solar power projects as reported in the National Renewable Energy Laboratory's Renewable Energy Finance Tracking Initiative (REFTI). The report presents REFTI data during the five quarterly periods from the fourth quarter of 2009 to the first half of 2011. The REFTI project relies exclusively on the voluntary participation of industry stakeholders for its data; therefore, it does not offer a comprehensive view of the technologies it tracks. Despite this limitation, REFTI is the only publicly available resource for renewable energy project financial terms. REFTI analysis offers usable inputs into the project economic evaluations of developers and investors, as well as the policy assessments of public utility commissions and others in the renewable energy industry.

  17. A microprocessor based picture analysis system for automatic track measurements

    International Nuclear Information System (INIS)

    Heinrich, W.; Trakowski, W.; Beer, J.; Schucht, R.

    1982-01-01

    In the last few years picture analysis became a powerful technique for measurements of nuclear tracks in plastic detectors. For this purpose rather expensive commercial systems are available. Two inexpensive microprocessor based systems with different resolution were developed. The video pictures of particles seen through a microscope are digitized in real time and the picture analysis is done by software. The microscopes are equipped with stages driven by stepping motors, which are controlled by separate microprocessors. A PDP 11/03 supervises the operation of all microprocessors and stores the measured data on its mass storage devices. (author)

  18. Ion track structure in poly(di-n-hexylsilane)

    International Nuclear Information System (INIS)

    Seki, S.; Maeda, K.; Kunimi, Y.

    2000-01-01

    Solid films of poly(di-n-hexylsilane) were irradiated with a variety of high energy ion beams, electron beams, and 60 Co γ-rays of which LET ranges from 0.2 to 1620 eV/nm. The beams caused non-homogeneous reactions of crosslinking and main chain scission in the films. The relative efficiency of the crosslinking was drastically changed in comparison with that of main chain scission. The anomalous change in the molecular weight distribution was analyzed with increasing irradiation fluence, and the ion beam induced reaction radius: track radius was determined for the radiation sources by the function of molecular weight dispersion. The molecular weight of the polymer was also traced to give the efficiency of crosslinking reactions: G(x) based on Charlesby-Pinner relationship. The value of G(x) increases from 0.042 to 0.91 with increasing values of LET. We adopt a reaction model in a single ion track to the crosslinking reactions, and the expanding chemical track along an ion trajectory is responsible for the increasing crosslinking G-values. The theoretical aspects of the energy distribution in penumbra area give a good interpretation to the chemical track radii obtained in this study. (author)

  19. Ion track structure in poly(di-n-hexylsilane)

    Energy Technology Data Exchange (ETDEWEB)

    Seki, S.; Maeda, K.; Kunimi, Y. [Osaka Univ., Ibaraki (Japan). Inst. of Scientific and Industrial Research] [and others

    2000-03-01

    Solid films of poly(di-n-hexylsilane) were irradiated with a variety of high energy ion beams, electron beams, and {sup 60}Co {gamma}-rays of which LET ranges from 0.2 to 1620 eV/nm. The beams caused non-homogeneous reactions of crosslinking and main chain scission in the films. The relative efficiency of the crosslinking was drastically changed in comparison with that of main chain scission. The anomalous change in the molecular weight distribution was analyzed with increasing irradiation fluence, and the ion beam induced reaction radius: track radius was determined for the radiation sources by the function of molecular weight dispersion. The molecular weight of the polymer was also traced to give the efficiency of crosslinking reactions: G(x) based on Charlesby-Pinner relationship. The value of G(x) increases from 0.042 to 0.91 with increasing values of LET. We adopt a reaction model in a single ion track to the crosslinking reactions, and the expanding chemical track along an ion trajectory is responsible for the increasing crosslinking G-values. The theoretical aspects of the energy distribution in penumbra area give a good interpretation to the chemical track radii obtained in this study. (author)

  20. The TL fluence response to heavy charged particles using the track interaction model and track structure information

    International Nuclear Information System (INIS)

    Rodriguez-Villafuerte, M.; Avila, O.

    2002-01-01

    The extended track interaction model, ETIM, has recently been proposed to explain the TLD-100 fluence response of peak 5 to heavy ions. This model includes the track structure information through the use of the luminescent-centre occupation probability obtained from radial dose distributions produced by the ions as they travel through the dosemeter. In this work an implementation of ETIM using Monte Carlo techniques is presented. The simulation was applied to calculate the response of peak 5 of both sensitised and normal TLD-100 crystals to 2.6 and 6.8 MeV 4 He ions. The simulation shows that the TL-fluence response has a strong dependence on ion energy, in disagreement with experimental observations. In spite of this, good agreement between the simulated TL-fluence response calculated for the 6.8 MeV 4 He radial distributions and the experimental data for the two energies was achieved. (author)

  1. Orchestrating care through the fast-track perspective: A qualitative content analysis of the provision of individualised nursing care in orthopaedic fast-track programmes.

    Science.gov (United States)

    Berthelsen, Connie Bøttcher; Frederiksen, Kirsten

    2017-02-01

    The lack of individualised care in orthopaedic regimes is often explained by the extended use of patient pathways and clinical guidelines. The aim of this study was to illuminate orthopaedic nurses' perceptions and experiences of providing individual nursing care for older patients in standardised fast-track programmes after total hip or knee replacement. Ten semi-structured interviews were conducted with orthopaedic nurses in orthopaedic wards at three Danish hospitals between April and June of 2015. Data were analysed using manifest and latent content analysis according to Graneheim and Lundman. The main theme of the overall interpretation was Orchestrating care through the fast-track perspective, accompanied by three sub-themes: Identifying and legitimising relevant individual care in the fast-track programme, Struggling to fit all patients in the fast-track programme and Justifying individualised care-related actions in the fast-track programme. The study concluded that, even though the nurses struggled to comply with the programme, they still found themselves compromising their nursing care and ethics to follow the standardised regime. There is a need to establish more specific inclusion criteria to maintain the effective elements in the programme and to facilitate nurses' opportunities to offer individual care, thereby ensuring that fragile patients have access to other possibilities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Structural analysis of DAEs

    DEFF Research Database (Denmark)

    Poulsen, Mikael Zebbelin

    2002-01-01

    , by the implementation of the Simpy tool box. This is an object oriented system implemented in the Python language. It can be used for analysis of DAEs, ODEs and non-linear equation and uses e.g. symbolic representations of expressions and equations. The presentations of theory and algorithms for structural index...... analysis of DAE is original in the sense that it is based on a new matrix representation of the structural information of a general DAE system instead of a graph oriented representation. Also the presentation of the theory is found to be more complete compared to other presentations, since it e.g. proves....... The methodology is mainly based on strutural index analysis which is not limited by the index of the DAE as other methodologies. As a result of structural index analysis one can perform index reduction of the DAE and obtain the so-called augmented underlying ODE. It is also described, how to use the augmented...

  3. Structural analysis consultation using artificial intelligence

    Science.gov (United States)

    Melosh, R. J.; Marcal, P. V.; Berke, L.

    1978-01-01

    The primary goal of consultation is definition of the best strategy to deal with a structural engineering analysis objective. The knowledge base to meet the need is designed to identify the type of numerical analysis, the needed modeling detail, and specific analysis data required. Decisions are constructed on the basis of the data in the knowledge base - material behavior, relations between geometry and structural behavior, measures of the importance of time and temperature changes - and user supplied specifics characteristics of the spectrum of analysis types, the relation between accuracy and model detail on the structure, its mechanical loadings, and its temperature states. Existing software demonstrated the feasibility of the approach, encompassing the 36 analysis classes spanning nonlinear, temperature affected, incremental analyses which track the behavior of structural systems.

  4. Risk analysis based CWR track buckling safety evaluations

    Science.gov (United States)

    2001-01-01

    As part of the Federal Railroad Administrations (FRA) track systems research program, the US DOTS Volpe Center is conducting analytic and experimental investigations to evaluate track lateral strength and stability limits for improved safety an...

  5. Error analysis of the track fit on the Riemann sphere

    CERN Document Server

    Strandlie, A

    2002-01-01

    We present in this paper a derivation of the covariance matrix of the estimated track parameters given by the Riemann sphere track fitting method. Results of a simulation experiment from the ATLAS Transition Radiation Tracker show that the covariance matrix presented herein very well reflects the actual spread of the track parameters. (6 refs).

  6. Structured light 3D tracking system for measuring motions in PET brain imaging

    DEFF Research Database (Denmark)

    Olesen, Oline Vinter; Jørgensen, Morten Rudkjær; Paulsen, Rasmus Reinhold

    2010-01-01

    Patient motion during scanning deteriorates image quality, especially for high resolution PET scanners. A new proposal for a 3D head tracking system for motion correction in high resolution PET brain imaging is set up and demonstrated. A prototype tracking system based on structured light...... where the projector is treated as a camera. Additionally, the surface reconstructions are corrected for the non-linear projector output prior to image capture. The results are convincing and a first step toward a fully automated tracking system for measuring head motions in PET imaging...

  7. Dynamic analysis and trajectory tracking of a tethered space robot

    Science.gov (United States)

    Soltani, Mehrzad; Keshmiri, Mehdi; Misra, Arun K.

    2016-11-01

    Dynamic analysis and trajectory tracking of a Tethered Space Robot (TSR) is investigated in this paper. A hybrid controller is used to perform the control task. It consists of two components, the first one deals with librational motion of the tether, while the second one takes care of the manipulator motion. A Nonlinear Model Predictive Control (NMPC) approach is used to control the tether libration; for this purpose, the libration is described by a single degree of freedom and the tether length rate is employed as the input to suppress the librational motion. A modified Computed Torque Method (CTM) is used to control the manipulator motion. The dynamic interaction between the manipulator motion and the librational motion is considered both in the system dynamics and control of the system. Using numerical simulations, performance of the proposed control system is evaluated for end-effector positioning as well as for trajectory tracking for two cases: a Low Earth Orbit (LEO) and the Geostationary Earth Orbit (GEO).

  8. Fishing for radiation quality: chromosome aberrations and the role of radiation track structure

    International Nuclear Information System (INIS)

    Hill, M.A.

    2015-01-01

    The yield of chromosome aberrations is not only dependent on dose but also on radiation quality, with high linear energy transfer (LET) typically having a greater biological effectiveness per unit dose than those of low-LET radiation. Differences in radiation track structure and cell morphology can also lead to quantitative differences in the spectra of the resulting chromosomal rearrangements, especially at low doses associated with typical human exposures. The development of combinatorial fluorescent labelling techniques (such as mFISH and mBAND) has helped to reveal the complexity of rearrangements, showing increasing complexity of observed rearrangements with increasing LET but has a resolution limited to ∼10 MBp. High-LET particles have not only been shown to produce clustered sites of DNA damage but also produce multiple correlated breaks along its path resulting in DNA fragments smaller than the resolution of these techniques. Additionally, studies have shown that the vast majority of radiation-induced HPRT mutations were also not detectable using fluorescent in situ hybridisation (FISH) techniques, with correlation of breaks along the track being reflected in the complexity of mutations, with intra- and inter-chromosomal insertions, and inversions occurring at the sites of some of the deletions. Therefore, the analysis of visible chromosomal rearrangements observed using current FISH techniques is likely to represent just the tip of the iceberg, considerably underestimating the extent and complexity of radiation induced rearrangements. (author)

  9. Instrumentation by accelerometers and distributed optical fiber sensors of a real ballastless track structure

    Science.gov (United States)

    Chapeleau, Xavier; Cottineau, Louis-Marie; Sedran, Thierry; Cailliau, Joël; Gueguen, Ivan; Dumoulin, Jean

    2015-04-01

    While relatively expensive to build, ballastless track structures are presently seen as an attractive alternative to conventional ballast. Firstly, they are built quickly since the slabs can be cast in place in an automated fashion by a slipform paver. Secondly, with its service life of at least 60 years, they requires little maintenance and hence they offers great availability. Other reasons for using ballastless tracks instead of ballasted tracks are the lack of suitable ballast material and the need of less noise and vibration for high-speed, in particularly. In the framework of a FUI project (n° 072906053), a new ballastless track structure based on concrete slabs was designed and its thermal-mechanical behavior in fatigue under selected mechanical and thermal conditions was tested on a real scale mockup in our laboratory [1,2]. By applying to the slabs both together mechanical stresses and thermal gradients, finite elements simulation and experimental results show that the weather conditions influence significantly the concrete slabs curvatures and by the way, the contact conditions with the underlaying layers. So it is absolutely necessary to take into account this effect in the design of the ballastless track structures in order to guarantee a long target life of at least of 50 years. After design and experimental tests in laboratory, a real ballastless track structure of 1km was built in France at the beginning of year 2013. This structure has 2 tracks on which several trains circulate every day since the beginning of year 2014. Before the construction, it was decided to monitor this structure to verify that the mechanical behavior is conform to the simulations. One part of the instrumentation is dedicated to monitor quasi-continuously the evolution of the curvature of a concrete slab. For this, 2 accelerometers were fixed on the slab under the track. One was placed on the edge and the other in the middle of the slab. The acquisition of the signals by a

  10. COI Structural Analysis Presentation

    Science.gov (United States)

    Cline, Todd; Stahl, H. Philip (Technical Monitor)

    2001-01-01

    This report discusses the structural analysis of the Next Generation Space Telescope Mirror System Demonstrator (NMSD) developed by Composite Optics Incorporated (COI) in support of the Next Generation Space Telescope (NGST) project. The mirror was submitted to Marshall Space Flight Center (MSFC) for cryogenic testing and evaluation. Once at MSFC, the mirror was lowered to approximately 40 K and the optical surface distortions were measured. Alongside this experiment, an analytical model was developed and used to compare to the test results. A NASTRAN finite element model was provided by COI and a thermal model was developed from it. Using the thermal model, steady state nodal temperatures were calculated based on the predicted environment of the large cryogenic test chamber at MSFC. This temperature distribution was applied in the structural analysis to solve for the deflections of the optical surface. Finally, these deflections were submitted for optical analysis and comparison to the interferometer test data.

  11. Motion tracking in narrow spaces: a structured light approach

    DEFF Research Database (Denmark)

    Olesen, Oline Vinter; Paulsen, Rasmus; Højgaard, Liselotte

    2010-01-01

    point clouds are matched to a reference surface using a robust iterative closest point algorithm. A main challenge is the narrow geometry requiring a compact structured light system and an oblique angle of observation. The system is validated using a mannequin head mounted on a rotary stage. We compare...

  12. MuTrack: a genome analysis system for large-scale mutagenesis in the mouse

    Directory of Open Access Journals (Sweden)

    Schmoyer Denise

    2004-02-01

    Full Text Available Abstract Background Modern biological research makes possible the comprehensive study and development of heritable mutations in the mouse model at high-throughput. Using techniques spanning genetics, molecular biology, histology, and behavioral science, researchers may examine, with varying degrees of granularity, numerous phenotypic aspects of mutant mouse strains directly pertinent to human disease states. Success of these and other genome-wide endeavors relies on a well-structured bioinformatics core that brings together investigators from widely dispersed institutions and enables them to seamlessly integrate data, observations and discussions. Description MuTrack was developed as the bioinformatics core for a large mouse phenotype screening effort. It is a comprehensive collection of on-line computational tools and tracks thousands of mutagenized mice from birth through senescence and death. It identifies the physical location of mice during an intensive phenotype screening process at several locations throughout the state of Tennessee and collects raw and processed experimental data from each domain. MuTrack's statistical package allows researchers to access a real-time analysis of mouse pedigrees for aberrant behavior, and subsequent recirculation and retesting. The end result is the classification of potential and actual heritable mutant mouse strains that become immediately available to outside researchers who have expressed interest in the mutant phenotype. Conclusion MuTrack demonstrates the effectiveness of using bioinformatics techniques in data collection, integration and analysis to identify unique result sets that are beyond the capacity of a solitary laboratory. By employing the research expertise of investigators at several institutions for a broad-ranging study, the TMGC has amplified the effectiveness of any one consortium member. The bioinformatics strategy presented here lends future collaborative efforts a template for a

  13. Variable Structure Compensation PID Control of Asymmetrical Hydraulic Cylinder Trajectory Tracking

    OpenAIRE

    Liu, Difei; Tang, Zhiyong; Pei, Zhongcai

    2015-01-01

    A novel variable structure compensation PID control, VSCPID in short, is proposed for trajectory tracking of asymmetrical hydraulic cylinder systems. This new control method improves the system robustness by adding a variable structure compensation term to the conventional PID control. The variable structure term is designed according to sliding mode control method and therefore could compensate the disturbance and uncertainty. Meanwhile, the proposed control method avoids the requirements fo...

  14. A Deep-Structured Conditional Random Field Model for Object Silhouette Tracking.

    Directory of Open Access Journals (Sweden)

    Mohammad Javad Shafiee

    Full Text Available In this work, we introduce a deep-structured conditional random field (DS-CRF model for the purpose of state-based object silhouette tracking. The proposed DS-CRF model consists of a series of state layers, where each state layer spatially characterizes the object silhouette at a particular point in time. The interactions between adjacent state layers are established by inter-layer connectivity dynamically determined based on inter-frame optical flow. By incorporate both spatial and temporal context in a dynamic fashion within such a deep-structured probabilistic graphical model, the proposed DS-CRF model allows us to develop a framework that can accurately and efficiently track object silhouettes that can change greatly over time, as well as under different situations such as occlusion and multiple targets within the scene. Experiment results using video surveillance datasets containing different scenarios such as occlusion and multiple targets showed that the proposed DS-CRF approach provides strong object silhouette tracking performance when compared to baseline methods such as mean-shift tracking, as well as state-of-the-art methods such as context tracking and boosted particle filtering.

  15. Impact of the track structure of heavy charged particles on cytogenetic damage in human blood lymphocytes

    Science.gov (United States)

    Lee, Ryonfa; Nasonova, Elena; Sommer, Sylwetster; Hartel, Carola; Durante, Marco; Ritter, Sylvia

    In space, astronauts are unavoidably exposed to charged particles from protons to irons. For a better estimate of the health risks of astronauts, further knowledge on the biological effects of charged particles, in particular the induction of cytogenetic damage is required. One im-portant factor that determines the biological response is the track structure of particles, i.e. their microscopic dose deposition in cells. The aim of the present study was to assess the influence of track structure of heavy ions on the yield and the quality of cytogenetic damage in human peripheral blood lymphocytes representing normal tissue. Cells were irradiated with 9.5 MeV/u C-ions or 990 MeV/u Fe-ions which have a comparable LET (175 keV/µm and 155 keV/µm, respectively) but a different track radius (2.3 and 6200 µm, respectively). When aberrations were analyzed in first cycle metaphases collected at different post-irradiation times (48-84 h) following fluorescence plus Giemsa staining, an increase in the aberration yield with sampling time was observed for both radiation qualities reflecting a damage dependent cell cycle progression delay to mitosis. The pronounced differences in the aberration frequency per cell are attributable to the stochastic distribution of particle traversals per cell nucleus (radius: 2.8 µm). Following C-ion exposure we found a high fraction of non-aberrant cells in samples collected at 48 h which represent cells not directly hit by a particle and slightly damaged cells that successfully repaired the induced lesions. In addition, at higher C-ion fluences the aberra-tion yield saturated, suggesting that a fraction of lymphocytes receiving multiple particle hits is not able to reach mitosis. On the other hand, at 48 h after Fe-ion exposure the proportion of non-aberrant cells is lower than after C-ion irradiation clearly reflecting the track structure of high energy particles (i.e. more homogeneous dose deposition compared to low energy C

  16. Eye-tracking analysis of face observing and face recognition

    Directory of Open Access Journals (Sweden)

    Andrej Iskra

    2016-07-01

    Full Text Available Images are one of the key elements of the content of the World Wide Web. One group of web images are also photos of people. When various institutions (universities, research organizations, companies, associations, etc. present their staff, they should include photos of people for the purpose of more informative presentation. The fact is, that there are many specifies how people see face images and how do they remember them. Several methods to investigate person’s behavior during use of web content can be performed and one of the most reliable method among them is eye tracking. It is very common technique, particularly when it comes to observing web images. Our research focused on behavior of observing face images in process of memorizing them. Test participants were presented with face images shown at different time scale. We focused on three main face elements: eyes, mouth and nose. The results of our analysis can help not only in web presentation, which are, in principle, not limited by time observation, but especially in public presentations (conferences, symposia, and meetings.

  17. SpatTrack: an imaging toolbox for analysis of vesicle motility and distribution in living cells

    DEFF Research Database (Denmark)

    Lund, Frederik Wendelboe; Jensen, Marie Louise; Christensen, Tanja

    2014-01-01

    SpatTrack, an open source, platform-independent program collecting a variety of methods for analysis of vesicle dynamics and distribution in living cells. SpatTrack performs 2D particle tracking, trajectory analysis and fitting of diffusion models to the calculated mean square displacement. It allows...... for spatial analysis of detected vesicle patterns including calculation of the radial distribution function and particle-based colocalization. Importantly, all analysis tools are supported by Monte Carlo simulations of synthetic images. This allows the user to assess the reliability of the analysis...... and to study alternative scenarios. We demonstrate the functionality of SpatTrack by performing a detailed imaging study of internalized fluorescence-tagged Niemann Pick C2 (NPC2) protein in human disease fibroblasts. Using SpatTrack, we show that NPC2 rescued the cholesterol-storage phenotype from...

  18. New approach to increase the gas throughput through mica track microfilters by changing their pore structure

    International Nuclear Information System (INIS)

    Shi-lun Guo; Tress, G.; Vater, P.; Khan, E.U.; Dersch, R.; Plachky, M.; Brandt, R.; Khan, H.A.

    1986-01-01

    A new approach has been developed to increase the gas throughput of nuclear track microfilters by changing the structure of the etched channels. This can be achieved by reducing the pore length of the filters and by changing the etched channel to two open funnels with a short neck in-between. The mica track microfilters are etched with hot concentrated NaOH solution only. The bulk etch rate is found to be 100 A h -1 . The structure of the mica pores has been studied in detail with optical and scanning electron microscopes. We find that the etching behavior of mica is anisotropic in several directions. A ''funnel-neck-funnel'' structure has been formed in mica by etching in NaOH. The gas throughput increase has been calculated from the modified structure of the mica pore. (author)

  19. Spectroscopic studies of anthracyclines: Structural characterization and in vitro tracking.

    Science.gov (United States)

    Szafraniec, Ewelina; Majzner, Katarzyna; Farhane, Zeineb; Byrne, Hugh J; Lukawska, Malgorzata; Oszczapowicz, Irena; Chlopicki, Stefan; Baranska, Malgorzata

    2016-12-05

    A broad spectroscopic characterization, using ultraviolet-visible (UV-vis) and Fourier transform infrared absorption as well as Raman scattering, of two commonly used anthracyclines antibiotics (DOX) daunorubicin (DNR), their epimers (EDOX, EDNR) and ten selected analogs is presented. The paper serves as a comprehensive spectral library of UV-vis, IR and Raman spectra of anthracyclines in the solid state and in solution. The particular advantage of Raman spectroscopy for the measurement and analysis of individual antibiotics is demonstrated. Raman spectroscopy can be used to monitor the in vitro uptake and distribution of the drug in cells, using both 488nm and 785nm as source wavelengths, with submicrometer spatial resolution, although the cellular accumulation of the drug is different in each case. The high information content of Raman spectra allows studies of the drug-cell interactions, and so the method seems very suitable for monitoring drug uptake and mechanisms of interaction with cellular compartments at the subcellular level. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. START: a system for flexible analysis of hundreds of genomic signal tracks in few lines of SQL-like queries.

    Science.gov (United States)

    Zhu, Xinjie; Zhang, Qiang; Ho, Eric Dun; Yu, Ken Hung-On; Liu, Chris; Huang, Tim H; Cheng, Alfred Sze-Lok; Kao, Ben; Lo, Eric; Yip, Kevin Y

    2017-09-22

    A genomic signal track is a set of genomic intervals associated with values of various types, such as measurements from high-throughput experiments. Analysis of signal tracks requires complex computational methods, which often make the analysts focus too much on the detailed computational steps rather than on their biological questions. Here we propose Signal Track Query Language (STQL) for simple analysis of signal tracks. It is a Structured Query Language (SQL)-like declarative language, which means one only specifies what computations need to be done but not how these computations are to be carried out. STQL provides a rich set of constructs for manipulating genomic intervals and their values. To run STQL queries, we have developed the Signal Track Analytical Research Tool (START, http://yiplab.cse.cuhk.edu.hk/start/ ), a system that includes a Web-based user interface and a back-end execution system. The user interface helps users select data from our database of around 10,000 commonly-used public signal tracks, manage their own tracks, and construct, store and share STQL queries. The back-end system automatically translates STQL queries into optimized low-level programs and runs them on a computer cluster in parallel. We use STQL to perform 14 representative analytical tasks. By repeating these analyses using bedtools, Galaxy and custom Python scripts, we show that the STQL solution is usually the simplest, and the parallel execution achieves significant speed-up with large data files. Finally, we describe how a biologist with minimal formal training in computer programming self-learned STQL to analyze DNA methylation data we produced from 60 pairs of hepatocellular carcinoma (HCC) samples. Overall, STQL and START provide a generic way for analyzing a large number of genomic signal tracks in parallel easily.

  1. Structured Analysis - IDEF0

    DEFF Research Database (Denmark)

    Larsen, Michael Holm

    1999-01-01

    This note introduces the IDEF0 modelling language (semantics and syntax), and associated rules and techniques, for developing structured graphical representations of a system or enterprise. Use of this standard for IDEF0 permits the construction of models comprising system functions (activities...... that require a modelling technique for the analysis, development, re-engineering, integration, or acquisition of information systems; and incorporate a systems or enterprise modelling technique into a business process analysis or software engineering methodology.This note is a summary of the Standard...... for Integration Definition for Function Modelling (IDEF0). I.e. the Draft Federal Information Processing Standards Publication 183, 1993, December 21, Announcing the Standard for Integration Definition for Function Modelling (IDEF0)....

  2. An investigation on how inner-core structures obtained through radar data assimilation affect track forecasting of typhoon Jangmi (2008) near Taiwan Island

    Science.gov (United States)

    Wang, Mingjun; Xue, Ming; Zhao, Kun

    2016-09-01

    The impacts of radar data assimilation (DA) on the westward track deflection of Typhoon Jangmi (2008) near Taiwan Island and the deflection mechanism are investigated. Initial conditions from two data assimilation experiments with significant track forecast differences are analyzed and compared. The environmental, axisymmetric, wave number 1 to 3 asymmetric fields of the typhoon are decomposed by using vortex separation and Fourier decomposition methods. The components are selectively recomposed into new initial conditions that include different vortex-scale components to examine the impact of individual components on the track prediction. The wave number 1 asymmetric structure is found to play a dominant role in the westward deflection of Typhoon Jangmi, and the accurate analysis of this component with radar DA helps to improve the track forecast. The wave number 1 asymmetric circulation is manifested as a pair of cyclonic and anticyclonic gyres with well-defined ventilation flows through the inner-core region, which provides additional steering of the typhoon vortex. The layer-mean environmental steering flow and ventilation flow associated with the wave number 1 gyres are further calculated to quantitatively evaluate the impact of ventilation flow. The ventilation flow is shown to be responsible for most of the westward motion component, suggesting again its role in causing the westward track deflection of Typhoon Jangmi. The results also suggest the importance of analyzing vortex-scale asymmetric structures for accurate tropical cyclone track forecasting, especially when there is a significant track deflection.

  3. Enhanced way of securing automated teller machine to track the misusers using secure monitor tracking analysis

    Science.gov (United States)

    Sadhasivam, Jayakumar; Alamelu, M.; Radhika, R.; Ramya, S.; Dharani, K.; Jayavel, Senthil

    2017-11-01

    Now a days the people's attraction towards Automated Teller Machine(ATM) has been increasing even in rural areas. As of now the security provided by all the bank is ATM pin number. Hackers know the way to easily identify the pin number and withdraw money if they haven stolen the ATM card. Also, the Automated Teller Machine is broken and the money is stolen. To overcome these disadvantages, we propose an approach “Automated Secure Tracking System” to secure and tracking the changes in ATM. In this approach, while creating the bank account, the bank should scan the iris known (a part or movement of our eye) and fingerprint of the customer. The scanning can be done with the position of the eye movements and fingerprints identified with the shortest measurements. When the card is swiped then ATM should request the pin, scan the iris and recognize the fingerprint and then allow the customer to withdraw money. If somebody tries to break the ATM an alert message is given to the nearby police station and the ATM shutter is automatically closed. This helps in avoiding the hackers who withdraw money by stealing the ATM card and also helps the government in identifying the criminals easily.

  4. Improving the quality of marine geophysical track line data: Along-track analysis

    Science.gov (United States)

    Chandler, Michael T.; Wessel, Paul

    2008-02-01

    We have examined 4918 track line geophysics cruises archived at the U.S. National Geophysical Data Center (NGDC) using comprehensive error checking methods. Each cruise was checked for observation outliers, excessive gradients, metadata consistency, and general agreement with satellite altimetry-derived gravity and predicted bathymetry grids. Thresholds for error checking were determined empirically through inspection of histograms for all geophysical values, gradients, and differences with gridded data sampled along ship tracks. Robust regression was used to detect systematic scale and offset errors found by comparing ship bathymetry and free-air anomalies to the corresponding values from global grids. We found many recurring error types in the NGDC archive, including poor navigation, inappropriately scaled or offset data, excessive gradients, and extended offsets in depth and gravity when compared to global grids. While ˜5-10% of bathymetry and free-air gravity records fail our conservative tests, residual magnetic errors may exceed twice this proportion. These errors hinder the effective use of the data and may lead to mistakes in interpretation. To enable the removal of gross errors without over-writing original cruise data, we developed an errata system that concisely reports all errors encountered in a cruise. With such errata files, scientists may share cruise corrections, thereby preventing redundant processing. We have implemented these quality control methods in the modified MGD77 supplement to the Generic Mapping Tools software suite.

  5. Multiple nuclei tracking using integer programming for quantitative cancer cell cycle analysis.

    Science.gov (United States)

    Li, Fuhai; Zhou, Xiaobo; Ma, Jinwen; Wong, Stephen T C

    2010-01-01

    Automated cell segmentation and tracking are critical for quantitative analysis of cell cycle behavior using time-lapse fluorescence microscopy. However, the complex, dynamic cell cycle behavior poses new challenges to the existing image segmentation and tracking methods. This paper presents a fully automated tracking method for quantitative cell cycle analysis. In the proposed tracking method, we introduce a neighboring graph to characterize the spatial distribution of neighboring nuclei, and a novel dissimilarity measure is designed based on the spatial distribution, nuclei morphological appearance, migration, and intensity information. Then, we employ the integer programming and division matching strategy, together with the novel dissimilarity measure, to track cell nuclei. We applied this new tracking method for the tracking of HeLa cancer cells over several cell cycles, and the validation results showed that the high accuracy for segmentation and tracking at 99.5% and 90.0%, respectively. The tracking method has been implemented in the cell-cycle analysis software package, DCELLIQ, which is freely available.

  6. Performance analysis of tracked panel according to predicted global radiation

    International Nuclear Information System (INIS)

    Chang, T.P.

    2009-01-01

    In this paper, the performance of a south facing single-axis tracked panel was analyzed according to global radiation predicted by empirical model. Mathematic expressions appropriate for single-axis tracking system were derived to calculate the radiation on it. Instantaneous increments of solar energy collected by the tracked panel relative to fixed panel are illustrated. The validity of the empirical model to Taiwan area will also be examined with the actual irradiation data observed in Taipei. The results are summarized as follows: the gains made by the tracked panel relative to a fixed panel are between 20.0% and 33.9% for four specified days of year, between 20.9% and 33.2% for the four seasons and 27.6% over the entire year. For latitudes below 65 deg., the yearly optimal tilt angle of a fixed panel is close to 0.8 times latitude, the irradiation ratio of the tracked panel to the fixed panel is about 1.3, which are smaller than the corresponding values calculated from extraterrestrial radiation, suggesting us that the installation angle should be adjusted toward a flatter angle and that the gain of the tracked panel will reduce while it works in cloudy climate or in air pollution environment. Although the captured radiation increases with the maximal rotation angle of panel, but the benefit on the global radiation case is still not so good as that on extraterrestrial radiation case. The irradiation data observed is much less than the data predicted by the empirical model, however the trend of fitting curve to the observed data is somewhat in agreement with that to the predicted one; the yearly gain is 14.3% when a tracked panel is employed throughout the year.

  7. An anthropometric analysis of elite Australian track cyclists.

    Science.gov (United States)

    McLean, B D; Parker, A W

    1989-01-01

    An anthropometric analysis was conducted on 35 elite male Australian track cyclists having a mean age of 22.6 years and who had been competing on average for 9 years. The relationship of anthropometric parameters to both bicycle saddle height and cycling performance was also investigated. Subjects were allocated, for purposes of comparison, to an endurance or sprint group on the basis of their competitive event. The group members in total were ectomorphic mesomorphs of height 178 +/- 4.8 cm and weight 72.5 +/- 6.6 kg on average. Percentage of saddle height to lower limb length averaged 99 +/- 1.6%, and significant correlations existed between strength and both body mass (r = 0.57) and thigh girth (r = 0.55). No significant correlation was seen between any anthropometric parameter and performance in an individual event. Cyclists in the spint group were heavier (76.2 +/- 7.4 vs. 70.0 +/- 4.7 kg, P less than 0.01) and stronger (258 +/- 44.4 vs. 216 +/- 30.5 Nm, P less than 0.01), and had larger chest (98.2 +/- 6.2 vs. 92.4 +/- 2.9 cm, P less than 0.01), arm (33.0 +/- 2.2 vs. 30.7 +/- 1.6 cm, P less than 0.01), thigh (57.5 +/- 3.4 vs. 54.3 +/- 2.5 cm, P less than 0.01) and calf girths (37.8 +/- 1.7 vs. 36.2 +/- 1.9 cm, P less than 0.05) than cyclists in the endurance group. They were also more mesomorphic (5.3 +/- 0.7 vs. 4.7 +/- 0.8, P less than 0.05) and less ectomorphic (2.3 +/- 0.9 vs. 2.9 +/- 0.6, P less than 0.05) than the endurance cyclists.

  8. Automatic visual tracking and social behaviour analysis with multiple mice.

    Directory of Open Access Journals (Sweden)

    Luca Giancardo

    Full Text Available Social interactions are made of complex behavioural actions that might be found in all mammalians, including humans and rodents. Recently, mouse models are increasingly being used in preclinical research to understand the biological basis of social-related pathologies or abnormalities. However, reliable and flexible automatic systems able to precisely quantify social behavioural interactions of multiple mice are still missing. Here, we present a system built on two components. A module able to accurately track the position of multiple interacting mice from videos, regardless of their fur colour or light settings, and a module that automatically characterise social and non-social behaviours. The behavioural analysis is obtained by deriving a new set of specialised spatio-temporal features from the tracker output. These features are further employed by a learning-by-example classifier, which predicts for each frame and for each mouse in the cage one of the behaviours learnt from the examples given by the experimenters. The system is validated on an extensive set of experimental trials involving multiple mice in an open arena. In a first evaluation we compare the classifier output with the independent evaluation of two human graders, obtaining comparable results. Then, we show the applicability of our technique to multiple mice settings, using up to four interacting mice. The system is also compared with a solution recently proposed in the literature that, similarly to us, addresses the problem with a learning-by-examples approach. Finally, we further validated our automatic system to differentiate between C57B/6J (a commonly used reference inbred strain and BTBR T+tf/J (a mouse model for autism spectrum disorders. Overall, these data demonstrate the validity and effectiveness of this new machine learning system in the detection of social and non-social behaviours in multiple (>2 interacting mice, and its versatility to deal with different

  9. Track Irregularity Time Series Analysis and Trend Forecasting

    Directory of Open Access Journals (Sweden)

    Jia Chaolong

    2012-01-01

    Full Text Available The combination of linear and nonlinear methods is widely used in the prediction of time series data. This paper analyzes track irregularity time series data by using gray incidence degree models and methods of data transformation, trying to find the connotative relationship between the time series data. In this paper, GM (1,1 is based on first-order, single variable linear differential equations; after an adaptive improvement and error correction, it is used to predict the long-term changing trend of track irregularity at a fixed measuring point; the stochastic linear AR, Kalman filtering model, and artificial neural network model are applied to predict the short-term changing trend of track irregularity at unit section. Both long-term and short-term changes prove that the model is effective and can achieve the expected accuracy.

  10. A Framework for Occupancy Tracking in a Building via Structural Dynamics Sensing of Footstep Vibrations

    Directory of Open Access Journals (Sweden)

    Jeffrey D. Poston

    2017-11-01

    Full Text Available Counting the number of occupants in building areas over time—occupancy tracking—provides valuable information for responding to emergencies, optimizing thermal conditions or managing personnel. This capability is distinct from tracking individual building occupants as they move within a building, has lower complexity than conventional tracking algorithms require, and avoids privacy concerns that tracking individuals may pose. The approach proposed here is a novel combination of data analytics applied to measurements from a building’s structural dynamics sensors (e.g., accelerometers or geophones. Specifically, measurements of footstep-generated structural waves provide evidence of occupancy in a building area. These footstep vibrations can be distinguished from other vibrations, and, once identified, the footsteps can be located. These locations, in turn, form the starting point of estimating occupancy in an area. In order to provide a meaningful occupancy count, however, it is first necessary to associate discrete footsteps with individuals. The proposed framework incorporates a tractable algorithm for this association task. The proposed algorithms operate online, updating occupancy count over time as new footsteps are detected. Experiments with measurements from a public building illustrate the operation of the proposed framework. This approach offers an advantage over others based on conventional technologies by avoiding the cost of a separate sensor system devoted to occupancy tracking.

  11. A Comprehensive Evaluation of Nanoparticle Tracking Analysis (NanoSight) for Characterization of Proteinaceous Submicron Particles

    NARCIS (Netherlands)

    Tian, X.; Nejadnik, M.R.; Baunsgaard, D.; Henriksen, A.; Rischel, C.; Jiskoot, W.

    2016-01-01

    Nanoparticle tracking analysis (NTA) has attracted great interest for application in the field of submicron particle characterization for biopharmaceuticals. It has the virtue of direct sample visualization and particle-by-particle tracking, but the complexity of method development has limited its

  12. Multi-scale simulation of structural heterogeneity of swift-heavy ion tracks in complex oxides

    Science.gov (United States)

    Wang, Jianwei; Lang, Maik; Ewing, Rodney C.; Becker, Udo

    2013-04-01

    Tracks formed by swift-heavy ion irradiation, 2.2 GeV Au, of isometric Gd2Ti2O7 pyrochlore and orthorhombic Gd2TiO5 were modeled using the thermal-spike model combined with a molecular-dynamics simulation. The thermal-spike model was used to calculate the energy dissipation over time and space. Using the time, space, and energy profile generated from the thermal-spike model, the molecular-dynamics simulations were performed to model the atomic-scale evolution of the tracks. The advantage of the combination of these two methods, which uses the output from the continuum model as an input for the atomistic model, is that it provides a means of simulating the coupling of the electronic and atomic subsystems and provides simultaneously atomic-scale detail of the track structure and morphology. The simulated internal structure of the track consists of an amorphous core and a shell of disordered, but still periodic, domains. For Gd2Ti2O7, the shell region has a disordered pyrochlore with a defect fluorite structure and is relatively thick and heterogeneous with different degrees of disordering. For Gd2TiO5, the disordered region is relatively small as compared with Gd2Ti2O7. In the simulation, ‘facets’, which are surfaces with definite crystallographic orientations, are apparent around the amorphous core and more evident in Gd2TiO5 along [010] than [001], suggesting an orientational dependence of the radiation response. These results show that track formation is controlled by the coupling of several complex processes, involving different degrees of amorphization, disordering, and dynamic annealing. Each of the processes depends on the mass and energy of the energetic ion, the properties of the material, and its crystallographic orientation with respect to the incident ion beam.

  13. Large scale track analysis for wide area motion imagery surveillance

    Science.gov (United States)

    van Leeuwen, C. J.; van Huis, J. R.; Baan, J.

    2016-10-01

    Wide Area Motion Imagery (WAMI) enables image based surveillance of areas that can cover multiple square kilometers. Interpreting and analyzing information from such sources, becomes increasingly time consuming as more data is added from newly developed methods for information extraction. Captured from a moving Unmanned Aerial Vehicle (UAV), the high-resolution images allow detection and tracking of moving vehicles, but this is a highly challenging task. By using a chain of computer vision detectors and machine learning techniques, we are capable of producing high quality track information of more than 40 thousand vehicles per five minutes. When faced with such a vast number of vehicular tracks, it is useful for analysts to be able to quickly query information based on region of interest, color, maneuvers or other high-level types of information, to gain insight and find relevant activities in the flood of information. In this paper we propose a set of tools, combined in a graphical user interface, which allows data analysts to survey vehicles in a large observed area. In order to retrieve (parts of) images from the high-resolution data, we developed a multi-scale tile-based video file format that allows to quickly obtain only a part, or a sub-sampling of the original high resolution image. By storing tiles of a still image according to a predefined order, we can quickly retrieve a particular region of the image at any relevant scale, by skipping to the correct frames and reconstructing the image. Location based queries allow a user to select tracks around a particular region of interest such as landmark, building or street. By using an integrated search engine, users can quickly select tracks that are in the vicinity of locations of interest. Another time-reducing method when searching for a particular vehicle, is to filter on color or color intensity. Automatic maneuver detection adds information to the tracks that can be used to find vehicles based on their

  14. Computerized analysis of coronary artery disease: performance evaluation of segmentation and tracking of coronary arteries in CT angiograms.

    Science.gov (United States)

    Zhou, Chuan; Chan, Heang-Ping; Chughtai, Aamer; Kuriakose, Jean; Agarwal, Prachi; Kazerooni, Ella A; Hadjiiski, Lubomir M; Patel, Smita; Wei, Jun

    2014-08-01

    The authors are developing a computer-aided detection system to assist radiologists in analysis of coronary artery disease in coronary CT angiograms (cCTA). This study evaluated the accuracy of the authors' coronary artery segmentation and tracking method which are the essential steps to define the search space for the detection of atherosclerotic plaques. The heart region in cCTA is segmented and the vascular structures are enhanced using the authors' multiscale coronary artery response (MSCAR) method that performed 3D multiscale filtering and analysis of the eigenvalues of Hessian matrices. Starting from seed points at the origins of the left and right coronary arteries, a 3D rolling balloon region growing (RBG) method that adapts to the local vessel size segmented and tracked each of the coronary arteries and identifies the branches along the tracked vessels. The branches are queued and subsequently tracked until the queue is exhausted. With Institutional Review Board approval, 62 cCTA were collected retrospectively from the authors' patient files. Three experienced cardiothoracic radiologists manually tracked and marked center points of the coronary arteries as reference standard following the 17-segment model that includes clinically significant coronary arteries. Two radiologists visually examined the computer-segmented vessels and marked the mistakenly tracked veins and noisy structures as false positives (FPs). For the 62 cases, the radiologists marked a total of 10191 center points on 865 visible coronary artery segments. The computer-segmented vessels overlapped with 83.6% (8520/10191) of the center points. Relative to the 865 radiologist-marked segments, the sensitivity reached 91.9% (795/865) if a true positive is defined as a computer-segmented vessel that overlapped with at least 10% of the reference center points marked on the segment. When the overlap threshold is increased to 50% and 100%, the sensitivities were 86.2% and 53.4%, respectively. For

  15. Instrumentation by distributed optical fiber sensors of a new ballastless track structure

    Science.gov (United States)

    Chapeleau, Xavier; Cottineau, Louis-Marie; Sedran, Thierry; Gueguen, Ivan; Cailliau, Joël

    2013-04-01

    While relatively expensive to build, ballastless track structures are presently seen as an attractive alternative to conventional ballast. With its service life of at least 60 years, they require little maintenance and hence they offer great availability. Other reasons for using ballastless tracks instead of ballasted tracks are the lack of suitable ballast material and the need of less noise and vibration for high-speed, in particularly. A new ballastless track structure has been designed to be circulated up to 300km/h, with a target life of 100 years. It is an interoperable way on concrete slabs that are cast-in-place and slip formed. This structure has been built and tested at the scale one in our laboratory. Indeed, ten millions cyclic loads were applied at 2.5Hz to evaluate the fatigue behaviour under selected mechanical and thermal conditions. To monitor the thermo-mechanical behavior of this new structure and to verify the numerical simulations used for its design, a lot of sensors have been embedded. In particularly, we have tested an optical fiber as distributed sensors to measure strain distribution in the railway model. This sensor can also be used to detect, localize and monitor cracks in concrete slabs. The optical fiber sensing technique ("Rayleigh technique") used in this experimentation has a centimetric spatial resolution which allows to measure complex strain profiles unlike electrical strain gauges which only give local information. Firstly, optical cables used as sensors have been successfully embedded and attached to the reinforcing steel bars in the structure. We have noted that they are resistant enough to resist concrete pouring and working activities. Secondly, strains measured by conventional strain gauges has confirmed the quality of the strain profiles measurements obtained by optical fiber sensors. Moreover, we have found a good agreement between experimental profiles measurements and those obtained by numerical simulations. Early

  16. Statistical tracking of tree-like tubular structures with efficient branching detection in 3D medical image data

    DEFF Research Database (Denmark)

    Wang, X.; Heimann, T.; Lo, P.

    2012-01-01

    The segmentation of tree-like tubular structures such as coronary arteries and airways is an essential step for many 3D medical imaging applications. Statistical tracking techniques for the extraction of elongated structures have received considerable attention in recent years due...... to their robustness against image noise and pathological changes. However, most tracking methods are limited to a specific application and do not support branching structures efficiently. In this work, we present a novel statistical tracking approach for the extraction of different types of tubular structures...

  17. ESC-Track: A computer workflow for 4-D segmentation, tracking, lineage tracing and dynamic context analysis of ESCs.

    Science.gov (United States)

    Fernández-de-Manúel, Laura; Díaz-Díaz, Covadonga; Jiménez-Carretero, Daniel; Torres, Miguel; Montoya, María C

    2017-05-01

    Embryonic stem cells (ESCs) can be established as permanent cell lines, and their potential to differentiate into adult tissues has led to widespread use for studying the mechanisms and dynamics of stem cell differentiation and exploring strategies for tissue repair. Imaging live ESCs during development is now feasible due to advances in optical imaging and engineering of genetically encoded fluorescent reporters; however, a major limitation is the low spatio-temporal resolution of long-term 3-D imaging required for generational and neighboring reconstructions. Here, we present the ESC-Track (ESC-T) workflow, which includes an automated cell and nuclear segmentation and tracking tool for 4-D (3-D + time) confocal image data sets as well as a manual editing tool for visual inspection and error correction. ESC-T automatically identifies cell divisions and membrane contacts for lineage tree and neighborhood reconstruction and computes quantitative features from individual cell entities, enabling analysis of fluorescence signal dynamics and tracking of cell morphology and motion. We use ESC-T to examine Myc intensity fluctuations in the context of mouse ESC (mESC) lineage and neighborhood relationships. ESC-T is a powerful tool for evaluation of the genealogical and microenvironmental cues that maintain ESC fitness.

  18. Structured Light-Based Motion Tracking in the Limited View of an MR Head Coil

    DEFF Research Database (Denmark)

    Erikshøj, M.; Olesen, Oline Vinter; Conradsen, Knut

    2013-01-01

    A markerless motion tracking (MT) system developed for use in PET brain imaging has been tested in the limited field of view (FOV) of the MR head coil from the Siemens Biograph mMR. The system is a 3D surface scanner that uses structured light (SL) to create point cloud reconstructions of the fac......A markerless motion tracking (MT) system developed for use in PET brain imaging has been tested in the limited field of view (FOV) of the MR head coil from the Siemens Biograph mMR. The system is a 3D surface scanner that uses structured light (SL) to create point cloud reconstructions...... of the facial surface. The point clouds are continuously realigned to a reference scan to obtain pose estimates. The system has been tested on a mannequin head performing controlled rotational and translational axial movements within the head coil outside the range of the magnetic field. The RMS of the residual...

  19. IODA - a fast, automated and flexible system for ion track analysis on film detectors

    International Nuclear Information System (INIS)

    Guth, H.; Hellmann, A.

    1995-02-01

    The IODA System (Ion Density Analysis) is used to analyse detector films, resulting from experiments at the pulse power generator KALIF (Karlsruhe Light Ion Facility). The system consists of evaluation software and a microcomputer, which controls a microscope, a video interface, and a multiprocessor subsystem. The segmentation of ion tracks is done automatically by means of digital image processing and pattern recognition. After defining an evaluation range and selecting a suitable analysis method, the film is scanned by the microscope for counting the impacts of the underlying image. According to the appearance of the ion tracks on the film, different methods can be selected. The evaluation results representing the ion density are stored in a matrix. The time needed for an evaluation at a high resolution can be shortened by shipping time consuming pattern recognition calculations to the multiprocessor subsystem. The bottlenecks of the system are the data transfer and the speed of the microscope stage. Simple handling of the system even on alphanumeric terminals had been an important design issue. This was implemented by a logically structured menue system including online help features. This report can be used a s a manual to support the user with system operation. (orig.) [de

  20. Comparison of SEM and Optical Analysis of DT Neutron Tracks in CR-39 Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Mosier-Boss, P A; Carbonelle, P; Morey, M S; Tinsley, J R; Hurley, J P

    2012-01-01

    CR-39 detectors were exposed to DT neutrons generated by a Thermo Fisher model A290 neutron generator. Afterwards, the etched tracks were examined both optically and by SEM. The purpose of the analysis was to compare the two techniques and to determine whether additional information on track geometry could be obtained by SEM analysis. The use of these techniques to examine triple tracks, diagnostic of ≥9.6 MeV neutrons, observed in CR-39 used in Pd/D codeposition experiments will also be discussed.

  1. Track Irregularity Time Series Analysis and Trend Forecasting

    OpenAIRE

    Jia Chaolong; Xu Weixiang; Wang Futian; Wang Hanning

    2012-01-01

    The combination of linear and nonlinear methods is widely used in the prediction of time series data. This paper analyzes track irregularity time series data by using gray incidence degree models and methods of data transformation, trying to find the connotative relationship between the time series data. In this paper, GM (1,1) is based on first-order, single variable linear differential equations; after an adaptive improvement and error correction, it is used to predict the long-term changin...

  2. An analysis of tracking error in image-guided neurosurgery.

    Science.gov (United States)

    Gerard, Ian J; Collins, D Louis

    2015-10-01

    This study quantifies some of the technical and physical factors that contribute to error in image-guided interventions. Errors associated with tracking, tool calibration and registration between a physical object and its corresponding image were investigated and compared with theoretical descriptions of these errors. A precision milled linear testing apparatus was constructed to perform the measurements. The tracking error was shown to increase in linear fashion with distance normal to the camera, and the tracking error ranged between 0.15 and 0.6 mm. The tool calibration error increased as a function of distance from the camera and the reference tool (0.2-0.8 mm). The fiducial registration error was shown to improve when more points were used up until a plateau value was reached which corresponded to the total fiducial localization error ([Formula: see text]0.8 mm). The target registration error distributions followed a [Formula: see text] distribution with the largest error and variation around fiducial points. To minimize errors, tools should be calibrated as close as possible to the reference tool and camera, and tools should be used as close to the front edge of the camera throughout the intervention, with the camera pointed in the direction where accuracy is least needed during surgery.

  3. Analysis and design of microprocessor-controlled peak-power-tracking system

    OpenAIRE

    Huynh, Phuong

    1992-01-01

    Analyses and designs of a peak-power tracking system using microprocessor control are performed. Large-signal stability of the system for various modes of operation is analyzed to predict system dynamics. The stability analysis is supported mainly by qualitative graphical representations of different component blocks of the system. Small-signal stability analysis around the equilibrium points is done to assure proper performance and operation of this particular peak-power track...

  4. Analysis of fixed tilt and sun tracking photovoltaic–micro wind based hybrid power systems

    International Nuclear Information System (INIS)

    Sinha, Sunanda; Chandel, S.S.

    2016-01-01

    Graphical abstract: 6 kW p photovoltaic–micro wind based hybrid power system analysis in a Indian Western Himalayan location. - Highlights: • Power generation by a roof mounted photovoltaic–micro wind hybrid system is explored. • Optimum hybrid configurations using fixed and sun tracking photovoltaic systems are determined. • Analysis of hybrid systems with optimally tilted and different sun tracking systems is presented. • Two axis sun tracking systems are found to generate 4.88–26.29% more energy than fixed tilt system. • Hybrid system installed at optimum tilt angle is found to be cost effective than a sun tracking system. - Abstract: In this study fixed tilt and sun tracking photovoltaic based micro wind hybrid power systems are analyzed along with determining the optimum configurations for a 6 kW p roof mounted micro wind based hybrid system using fixed and tracking photovoltaic systems to enhance the power generation potential in a low windy Indian hilly terrain with good solar resource. The main objective of the study is to enhance power generation by focusing on photovoltaic component of the hybrid system. A comparative power generation analysis of different configurations of hybrid systems with fixed tilt, monthly optimum tilt, yearly optimum tilt and 6 different sun tracking photovoltaic systems is carried out using Hybrid Optimization Model for Electric Renewables. Monthly and seasonal optimum tilt angles determined for the location vary between 0° and 60° with annual optimum tilt angle as 29.25°. The optimum configurations for all sun tracking systems except for the two axis tracking system is found to be 7 kW p photovoltaic system, one 5 kW p wind turbine, 10 batteries and a 2 kW p inverter. The optimum configuration for two axis tracking system and two types of fixed tilt systems, is found to be a 8 kW p photovoltaic system, one 5 kW p wind turbine, 10 batteries and a 2 kW p inverter. The results show that horizontal axis with

  5. Damage threshold and structure of swift heavy ion tracks in Al2O3

    Science.gov (United States)

    Rymzhanov, R. A.; Medvedev, N.; Volkov, A. E.

    2017-11-01

    Structure changes and their formation threshold in swift heavy ion (SHI) tracks in Al2O3 are studied using a combined start-to-end numerical model. The hybrid approach consists of the Monte-Carlo code TREKIS, describing kinetics of the electronic subsystem, and classical Molecular Dynamics for lattice atoms. The developed approach is free from a posteriori fitting parameters. Simulations of Xe 167 MeV ion impacts show that relaxation of an excess lattice energy results in formation of a cylindrical discontinuous disordered region of about 2 nm in diameter. Recent transmission electron microscopy observations agree with these results. The threshold of an SHI track formation is estimated to be ~6.1 keV nm‑1. Calculated x-ray diffraction patterns of irradiated material demonstrate more pronounced damage of the Al atoms sublattice near SHI trajectories. Modeling of Xe ion tracks overlapping demonstrates that the damaged area can be restored to a near virgin state. Estimations give 6.5 nm as the minimal distance between the Xe ion trajectories resulting in recovery of the transformed structure produced by the previous ion.

  6. Towards Therapeutic Delivery of Extracellular Vesicles: Strategies for In Vivo Tracking and Biodistribution Analysis

    Science.gov (United States)

    Di Rocco, Giuliana; Baldari, Silvia

    2016-01-01

    Extracellular vesicles (EVs), such as microvesicles and exosomes, are membranous structures containing bioactive material released by several cells types, including mesenchymal stem/stromal cells (MSCs). Increasing lines of evidences point to EVs as paracrine mediators of the beneficial effects on tissue remodeling associated with cell therapy. Administration of MSCs-derived EVs has therefore the potential to open new and safer therapeutic avenues, alternative to cell-based approaches, for degenerative diseases. However, an enhanced knowledge about in vivo EVs trafficking upon delivery is required before effective clinical translation. Only a few studies have focused on the biodistribution analysis of exogenously administered MSCs-derived EVs. Nevertheless, current strategies for in vivo tracking in animal models have provided valuable insights on the biodistribution upon systemic delivery of EVs isolated from several cellular sources, indicating in liver, spleen, and lungs the preferential target organs. Different strategies for targeting EVs to specific tissues to enhance their therapeutic efficacy and reduce possible off-target effects have been investigated. Here, in the context of a possible clinical application of MSC-derived EVs for tissue regeneration, we review the existing strategies for in vivo tracking and targeting of EVs isolated from different cellular sources and the studies elucidating the biodistribution of exogenously administered EVs. PMID:27994623

  7. Recent progress in fission track analysis and its applications in China

    International Nuclear Information System (INIS)

    Wang, S.C.; Kang, T.S.; Jing, G.R.

    1993-01-01

    Fission track analysis (FTA) has been developed and applied in China since 1985. Since then great efforts have been made on methodology and applications. In order to improve the accuracy of fission track dating, zeta calibration constants have been determined against NBS SRM 962 standard uranium glass and seven age standards. TINT method and silver coating were used to increase the density and contrast of confined spontaneous fission tracks on apatite. Based on the fanning model of fission track annealing for apatite presented by Laslett, G.M., a forward computer modeling of track shortening and age evolution was completed and an inverse method of modeling thermal histories from apatite fission track data is underway. Apatite fission track data (age and track length), zircon age and forward modeling method have been used to reveal thermal and tectonic histories of several sedimentary basins and of a collision zone in China. In this presentation some progress in methodology and application will be presented and discussed. (Author)

  8. Incremental Structured Dictionary Learning for Video Sensor-Based Object Tracking

    Science.gov (United States)

    Xue, Ming; Yang, Hua; Zheng, Shibao; Zhou, Yi; Yu, Zhenghua

    2014-01-01

    To tackle robust object tracking for video sensor-based applications, an online discriminative algorithm based on incremental discriminative structured dictionary learning (IDSDL-VT) is presented. In our framework, a discriminative dictionary combining both positive, negative and trivial patches is designed to sparsely represent the overlapped target patches. Then, a local update (LU) strategy is proposed for sparse coefficient learning. To formulate the training and classification process, a multiple linear classifier group based on a K-combined voting (KCV) function is proposed. As the dictionary evolves, the models are also trained to timely adapt the target appearance variation. Qualitative and quantitative evaluations on challenging image sequences compared with state-of-the-art algorithms demonstrate that the proposed tracking algorithm achieves a more favorable performance. We also illustrate its relay application in visual sensor networks. PMID:24549252

  9. Incremental Structured Dictionary Learning for Video Sensor-Based Object Tracking

    Directory of Open Access Journals (Sweden)

    Ming Xue

    2014-02-01

    Full Text Available To tackle robust object tracking for video sensor-based applications, an online discriminative algorithm based on incremental discriminative structured dictionary learning (IDSDL-VT is presented. In our framework, a discriminative dictionary combining both positive, negative and trivial patches is designed to sparsely represent the overlapped target patches. Then, a local update (LU strategy is proposed for sparse coefficient learning. To formulate the training and classification process, a multiple linear classifier group based on a K-combined voting (KCV function is proposed. As the dictionary evolves, the models are also trained to timely adapt the target appearance variation. Qualitative and quantitative evaluations on challenging image sequences compared with state-of-the-art algorithms demonstrate that the proposed tracking algorithm achieves a more favorable performance. We also illustrate its relay application in visual sensor networks.

  10. Subsurface analysis of semiconductor structures with helium ion microscopy

    NARCIS (Netherlands)

    van Gastel, Raoul; Hlawacek, G.; Zandvliet, Henricus J.W.; Poelsema, Bene

    2012-01-01

    We have used helium ion microscopy to directly track the subsurface diffusion of Pd through a Si stack in a non-invasive manner. The imaging and analysis of semiconductor structures along a direction perpendicular to the substrate is traditionally performed by making cross sections of a sample and

  11. Nonlinear Structural Analysis

    Indian Academy of Sciences (India)

    This special issue of Sadhana is a collection of five papers selected from those presented at the Eighth National Seminar on Aerospace Structures (8th NASAS) organised by and held at the Indian Institute of Technology Madras, Chennai, on 9±10 October 1998. The Structures Panel of the Aeronautics Research and ...

  12. Data gathering and analysis in gaming using Tobii Eye Tracking

    OpenAIRE

    Aukrust Avemo, Jonas

    2015-01-01

    E-sports is growing and the price pools in e-sports tournaments are increasing, Valves video game DotA 2 is one of the bigger e-sports. As professional gamers train to increase their skill, new tools to help the training might become very important. Eye tracking can give an extra training dimension for the gamer. The aim of this master thesis is to develop a Visual Attention Index for DotA 2, that is, a number that reflects the player’s visual attention during a game. Interviews with gamers c...

  13. Assessment of Design Tools and Criteria for Urban Rail Track Structures : Volume 2. At-Grade Slab Track.

    Science.gov (United States)

    1974-04-01

    This report presents the results of a critical review of the technical factors which govern the design and performance of at-grade slab track for urban rail systems. The assessment of current design practices is based on a review of the literature an...

  14. Assessment of design tools and criteria for urban rail track structures : volume 1. at-grade tie-ballast track.

    Science.gov (United States)

    1974-04-30

    The report presents the results of a critical review of the technical factors which govern the design and performance of at-grade tie-ballast track for urban rail systems. The assessment of current design practice is based on a review of the literatu...

  15. Random Vibration Analysis of Train Moving over Slab Track on Bridge under Track Irregularities and Earthquakes by Pseudoexcitation Method

    OpenAIRE

    Zeng, Zhiping; Zhu, Kunteng; He, Xianfeng; Xu, Wentao; Chen, Lingkun; Lou, Ping

    2015-01-01

    This paper investigates the random vibration and the dynamic reliability of operation stability of train moving over slab track on bridge under track irregularities and earthquakes by the pseudoexcitation method (PEM). Each vehicle is modeled by multibody dynamics. The track and bridge is simulated by a rail-slab-girder-pier interaction finite element model. The coupling equations of motion are established based on the wheel-rail interaction relationship. The random excitations of the track i...

  16. Structures and their analysis

    CERN Document Server

    Fuchs, Maurice Bernard

    2016-01-01

    Addressing structures, this book presents a classic discipline in a modern setting by combining illustrated examples with insights into the solutions. It is the fruit of the author’s many years of teaching the subject and of just as many years of research into the design of optimal structures. Although intended for an advanced level of instruction it has an undergraduate course at its core. Further, the book was written with the advantage of having massive computer power in the background, an aspect which changes the entire approach to many engineering disciplines and in particular to structures. This paradigm shift has dislodged the force (flexibility) method from its former prominence and paved the way for the displacement (stiffness) method, despite the multitude of linear equations it spawns. In this book, however, both methods are taught: the force method offers a perfect vehicle for understanding structural behavior, bearing in mind that it is the displacement method which does the heavy number crunch...

  17. Emerging Hot Spot Analysis of Tracking Data from a Logistics Company

    DEFF Research Database (Denmark)

    Reinau, Kristian Hegner

    2017-01-01

    and significantly about the location of the bottlenecks. This paper analyses whether such knowledge can be generated using tracking data from logistics companies. The chosen case region is North Jutland in Denmark, and the method deployed is emerging hot spot analysis on tracking data from approximately 1......,500 trailers provided by one large Danish logistics company for the period 2012-2016. This methodology is relatively new in the transport field and has never been used in a Danish context before, and the paper shows that by using the tracking data and this methodology it is possible to identify where freight...

  18. Untangling cell tracks: Quantifying cell migration by time lapse image data analysis.

    Science.gov (United States)

    Svensson, Carl-Magnus; Medyukhina, Anna; Belyaev, Ivan; Al-Zaben, Naim; Figge, Marc Thilo

    2018-03-01

    Automated microscopy has given researchers access to great amounts of live cell imaging data from in vitro and in vivo experiments. Much focus has been put on extracting cell tracks from such data using a plethora of segmentation and tracking algorithms, but further analysis is normally required to draw biologically relevant conclusions. Such relevant conclusions may be whether the migration is directed or not, whether the population has homogeneous or heterogeneous migration patterns. This review focuses on the analysis of cell migration data that are extracted from time lapse images. We discuss a range of measures and models used to analyze cell tracks independent of the biological system or the way the tracks were obtained. For single-cell migration, we focus on measures and models giving examples of biological systems where they have been applied, for example, migration of bacteria, fibroblasts, and immune cells. For collective migration, we describe the model systems wound healing, neural crest migration, and Drosophila gastrulation and discuss methods for cell migration within these systems. We also discuss the role of the extracellular matrix and subsequent differences between track analysis in vitro and in vivo. Besides methods and measures, we are putting special focus on the need for openly available data and code, as well as a lack of common vocabulary in cell track analysis. © 2017 International Society for Advancement of Cytometry. © 2017 International Society for Advancement of Cytometry.

  19. ATOM: a semiautomatic measuring system for the analysis of fission track characteristics in anisotropic minerals

    International Nuclear Information System (INIS)

    Rebetez, M.; Zoppis, B.; Rebrab, A.; Grillon, P.; Gentina, E.; Chambaudet, A.

    1991-01-01

    We have developed a semiautomatic measuring system for the analysis of fission tracks in minerals. This system consists of an optical microscope equipped with a drawing tube which is connected to an IBM compatible computer equipped with a digitizer. ATOM is the software, developed using TURBO-PASCAL Version 4.0. It is presently used for performing data input on the densities, lengths and orientations of tracks. It also coordinates the activities of storing and processing the data of measured tracks and it gives the results of the statistical analysis. In this way, the mineral age determination can be made either by the Population Method (PM) or by the External Detector Method (EDM). The curves for fission track length distributions and orientations are drawn and may be printed out. This system's hardware and software are described in this paper. (author)

  20. The use of a break-even analysis: financial analysis of a fast-track program.

    Science.gov (United States)

    Saywell, R M; Cordell, W H; Nyhuis, A W; Giles, B K; Culler, S D; Woods, J R; Chu, D K; McKinzie, J P; Rodman, G H

    1995-08-01

    To calculate the financial break-even point and illustrate how changes in third-party reimbursement and eligibility could affect a program's fiscal standing. Demographic, clinical, and financial data were collected retrospectively for 446 patients treated in a fast-track program during June 1993. The fast-track program is located within the confines of the emergency medicine and trauma center at a 1,050-bed tertiary care Midwestern teaching hospital and provides urgent treatment to minimally ill patients. A financial break-even analysis was performed to determine the point where the program generated enough revenue to cover its total variable and fixed costs, both direct and indirect. Given the relatively low average collection rate (62%) and high percentage of uninsured patients (31%), the analysis showed that the program's revenues covered its direct costs but not all of the indirect costs. Examining collection rates or payer class mix without examining both costs and revenues may lead to an erroneous conclusion about a program's fiscal viability. Sensitivity analysis also shows that relatively small changes in third-party coverage or eligibility (income) requirements can have a large impact on the program's financial solvency and break-even volumes.

  1. Modeling Radiation Effects of Ultrasoft X Rays on the Basis of Amorphous Track Structure.

    Science.gov (United States)

    Buch, Tamara; Scifoni, Emanuele; Krämer, Michael; Durante, Marco; Scholz, Michael; Friedrich, Thomas

    2018-01-01

    There is experimental evidence that ultrasoft X rays (0.1-5 keV) show a higher biological effectiveness than high-energy photons. Similar to high-LET radiation, this is attributed to a rather localized dose distribution associated with a considerably smaller range of secondary electrons, which results in an increasing yield of double-strand breaks (DSBs) and potentially more complex lesions. We previously reported on the application of the Giant LOop Binary LEsion (GLOBLE) model to ultrasoft X rays, in which experimental values of the relative biological effectiveness (RBE) for DSB induction were used to show that this increasing DSB yield was sufficient to explain the enhanced effectiveness in the cell inactivation potential of ultrasoft X rays. Complementary to GLOBLE, we report here on a modeling approach to predict the increased DSB yield of ultrasoft X rays on the basis of amorphous track structure formed by secondary electrons, which was derived from Monte Carlo track structure simulations. This procedure is associated with increased production of single-strand break (SSB) clusters, which are caused by the highly localized energy deposition pattern induced by low-energy photons. From this, the RBE of ultrasoft X rays can be determined and compared to experimental data, showing that the inhomogeneity of the energy deposition pattern represents the key variable to describe the increased biological effectiveness of ultrasoft X rays. Thus, this work demonstrates an extended applicability of the amorphous track structure concept and tests its limits with respect to its predictive power. The employed model mechanism offers a possible explanation for how the cellular response to ultrasoft X rays is directly linked to the energy deposition properties on the nanometric scale.

  2. Collapse Analysis of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2008-01-01

    to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obtained. Therefore the structure can be considered......A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...... of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...

  3. A tracking system for laboratory mice to support medical researchers in behavioral analysis.

    Science.gov (United States)

    Macrì, S; Mainetti, L; Patrono, L; Pieretti, S; Secco, A; Sergi, I

    2015-08-01

    The behavioral analysis of laboratory mice plays a key role in several medical and scientific research areas, such as biology, toxicology, pharmacology, and so on. Important information on mice behavior and their reaction to a particular stimulus is deduced from a careful analysis of their movements. Moreover, behavioral analysis of genetically modified mice allows obtaining important information about particular genes, phenotypes or drug effects. The techniques commonly adopted to support such analysis have many limitations, which make the related systems particularly ineffective. Currently, the engineering community is working to explore innovative identification and sensing technologies to develop new tracking systems able to guarantee benefits to animals' behavior analysis. This work presents a tracking solution based on passive Radio Frequency Identification Technology (RFID) in Ultra High Frequency (UHF) band. Much emphasis is given to the software component of the system, based on a Web-oriented solution, able to process the raw tracking data coming from a hardware system, and offer 2D and 3D tracking information as well as reports and dashboards about mice behavior. The system has been widely tested using laboratory mice and compared with an automated video-tracking software (i.e., EthoVision). The obtained results have demonstrated the effectiveness and reliability of the proposed solution, which is able to correctly detect the events occurring in the animals' cage, and to offer a complete and user-friendly tool to support researchers in behavioral analysis of laboratory mice.

  4. Nonlinear Structural Analysis

    Indian Academy of Sciences (India)

    at the Indian Institute of Technology Madras, Chennai, on 9±10 October 1998. The Structures Panel of the ... have pushed frontiers of technology to such extents that linear theories no longer suffice. This is the case in ... In the second paper, Krishnam Raju and Nagabhushanam extend the Integrated Force. Method (IFM) of ...

  5. Tracking the Reorganization of Module Structure in Time-Varying Weighted Brain Functional Connectivity Networks.

    Science.gov (United States)

    Schmidt, Christoph; Piper, Diana; Pester, Britta; Mierau, Andreas; Witte, Herbert

    2018-05-01

    Identification of module structure in brain functional networks is a promising way to obtain novel insights into neural information processing, as modules correspond to delineated brain regions in which interactions are strongly increased. Tracking of network modules in time-varying brain functional networks is not yet commonly considered in neuroscience despite its potential for gaining an understanding of the time evolution of functional interaction patterns and associated changing degrees of functional segregation and integration. We introduce a general computational framework for extracting consensus partitions from defined time windows in sequences of weighted directed edge-complete networks and show how the temporal reorganization of the module structure can be tracked and visualized. Part of the framework is a new approach for computing edge weight thresholds for individual networks based on multiobjective optimization of module structure quality criteria as well as an approach for matching modules across time steps. By testing our framework using synthetic network sequences and applying it to brain functional networks computed from electroencephalographic recordings of healthy subjects that were exposed to a major balance perturbation, we demonstrate the framework's potential for gaining meaningful insights into dynamic brain function in the form of evolving network modules. The precise chronology of the neural processing inferred with our framework and its interpretation helps to improve the currently incomplete understanding of the cortical contribution for the compensation of such balance perturbations.

  6. Flexible Fusion Structure-Based Performance Optimization Learning for Multisensor Target Tracking.

    Science.gov (United States)

    Ge, Quanbo; Wei, Zhongliang; Cheng, Tianfa; Chen, Shaodong; Wang, Xiangfeng

    2017-05-06

    Compared with the fixed fusion structure, the flexible fusion structure with mixed fusion methods has better adjustment performance for the complex air task network systems, and it can effectively help the system to achieve the goal under the given constraints. Because of the time-varying situation of the task network system induced by moving nodes and non-cooperative target, and limitations such as communication bandwidth and measurement distance, it is necessary to dynamically adjust the system fusion structure including sensors and fusion methods in a given adjustment period. Aiming at this, this paper studies the design of a flexible fusion algorithm by using an optimization learning technology. The purpose is to dynamically determine the sensors' numbers and the associated sensors to take part in the centralized and distributed fusion processes, respectively, herein termed sensor subsets selection . Firstly, two system performance indexes are introduced. Especially, the survivability index is presented and defined. Secondly, based on the two indexes and considering other conditions such as communication bandwidth and measurement distance, optimization models for both single target tracking and multi-target tracking are established. Correspondingly, solution steps are given for the two optimization models in detail. Simulation examples are demonstrated to validate the proposed algorithms.

  7. Poles tracking of weakly nonlinear structures using a Bayesian smoothing method

    Science.gov (United States)

    Stephan, Cyrille; Festjens, Hugo; Renaud, Franck; Dion, Jean-Luc

    2017-02-01

    This paper describes a method for the identification and the tracking of poles of a weakly nonlinear structure from its free responses. This method is based on a model of multichannel damped sines whose parameters evolve over time. Their variations are approximated in discrete time by a nonlinear state space model. States are estimated by an iterative process which couples a two-pass Bayesian smoother with an Expectation-Maximization (EM) algorithm. The method is applied on numerical and experimental cases. As a result, accurate frequency and damping estimates are obtained as a function of amplitude.

  8. Radial dose distribution around an energetic heavy ion and an ion track structure model

    Energy Technology Data Exchange (ETDEWEB)

    Furukawa, Katsutoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ohno, Shin-ichi; Namba, Hideki; Taguchi, Mitsumasa; Watanabe, Ritsuko

    1997-03-01

    Ionization currents produced in a small wall-less ionization chamber located at varying distance from the 200 MeV Ni{sup 12+} ion`path traversing Ar gas were measured and utilized to construct a track structure model. Using the LET value of 200 MeV Ni{sup 12+} and G(Fe{sup 3+}) in Fricke solutions (= 15.4) for fast electrons, we estimate G(Fe{sup 3+}) for this ion to be 5.0. (author)

  9. Controlled Structure of Electrochemically Deposited Pd Nanowires in Ion-Track Templates

    Science.gov (United States)

    Duan, Jinglai; Lyu, Shuangbao; Yao, Huijun; Mo, Dan; Chen, Yonghui; Sun, Youmei; Maaz, K.; Maqbool, M.; Liu, Jie

    2015-12-01

    Understanding and controlling structural properties of the materials are crucial in materials research. In this paper, we report that crystallinity and crystallographic orientation of Pd nanowires can be tailored by varying the fabrication conditions during electrochemical deposition in polycarbonate ion-track templates. By changing the deposition temperature during the fabrication process, the nanowires with both single- and poly-crystallinities were obtained. The wires with preferred crystallographic orientations along [111], [100], and [110] directions were achieved via adjusting the applied voltage and temperature during electrochemical deposition.

  10. Combination of various data analysis techniques for efficient track reconstruction in very high multiplicity events

    Science.gov (United States)

    Siklér, Ferenc

    2017-08-01

    A novel combination of established data analysis techniques for reconstructing charged-particles in high energy collisions is proposed. It uses all information available in a collision event while keeping competing choices open as long as possible. Suitable track candidates are selected by transforming measured hits to a binned, three- or four-dimensional, track parameter space. It is accomplished by the use of templates taking advantage of the translational and rotational symmetries of the detectors. Track candidates and their corresponding hits, the nodes, form a usually highly connected network, a bipartite graph, where we allow for multiple hit to track assignments, edges. In order to get a manageable problem, the graph is cut into very many minigraphs by removing a few of its vulnerable components, edges and nodes. Finally the hits are distributed among the track candidates by exploring a deterministic decision tree. A depth-limited search is performed maximizing the number of hits on tracks, and minimizing the sum of track-fit χ2. Simplified but realistic models of LHC silicon trackers including the relevant physics processes are used to test and study the performance (efficiency, purity, timing) of the proposed method in the case of single or many simultaneous proton-proton collisions (high pileup), and for single heavy-ion collisions at the highest available energies.

  11. Fatigue crack monitoring in train track steel structures using plastic optical fiber sensor

    Science.gov (United States)

    Yang, D.; Li, D.; Kuang, K. S. C.

    2017-10-01

    Plastic optical fiber (POF) sensors have shown excellent potential for damage detection and structural health monitoring in a variety of engineering structures. This paper discusses the feasibility of using POF sensors in conjunction with a signal-processing algorithm capable of detecting and monitoring fatigue-induced cracks in train track steel structures in real time. The POF sensor, which was modified from an existing design to increase the signal sensitivity, allows for accurate detection of a fatigue crack developed in a specimen, and was found to compare well to the reference acoustic emission (AE) sensors and crack opening displacement (COD) gauge attached to the specimen. The crack-detection technique, which relies on capturing the intensity variation of the POF sensor, was not susceptible to any signal fluctuations commonly associated with intensity-based optical fiber sensors. The results show that the technique has potential for use in detecting the initiation and propagation of specific segments of a structure vulnerable to cracking due to external cyclic loading, e.g. at welded joints in train tracks under train loads or offshore structures subject to wave loads. The POF sensor system is composed of inexpensive parts (LED light source, photodetectors, and data acquisition units) and can easily be installed to the host structure. To validate the proposed damage-detection technique, the instrumented specimens are subjected to cyclic loading in order to induce stable crack propagation in the specimen. A COD gauge and AE were used for the purpose of calibration and comparison. The results show remarkable resemblance in terms of crack initiation and propagation identification exhibited by all three types of sensors, highlighting the potential of the proposed sensor for crack initiation detection and subsequent monitoring of crack propagation.

  12. Structural systems reliability analysis

    International Nuclear Information System (INIS)

    Frangopol, D.

    1975-01-01

    For an exact evaluation of the reliability of a structure it appears necessary to determine the distribution densities of the loads and resistances and to calculate the correlation coefficients between loads and between resistances. These statistical characteristics can be obtained only on the basis of a long activity period. In case that such studies are missing the statistical properties formulated here give upper and lower bounds of the reliability. (orig./HP) [de

  13. DNA analysis of hair and scat collected along snow tracks to document the presence of Canada Lynx.

    Science.gov (United States)

    Kevin S. McKelvey; Jeffrey von Kienast; Keith B. Aubry; Gary M. Koehler; Bejamin T. Maletzke; John R. Squires; Edward L. Lindquist; Steve Loch; Michael K. Schwartz

    2006-01-01

    Snow tracking is often used to inventory carnivore communities, but species identification using this method can produce ambiguous and misleading results. DNA can be extracted from hair and scat samples collected from tracks made in snow. Using DNA analysis could allow positive track identification across a broad range of snow conditions, thus increasing survey...

  14. Collapse Analysis of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2008-01-01

    A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...... be fulfilled: a) demonstrating that those parts of the structure essential for the safety only have little sensitivity with respect to unintentional loads and defects, or b) demonstrating a load case with „removal of a limited part of the structure‟ in order to document that an extensive failure...... of the structure will not occur if a limited part of the structure fails, or c) demonstrating sufficient safety of key elements, such that the entire structure with one or more key elements has the same reliability as a structure where robustness is documented by b). Based on investigations with respect...

  15. Loss Performance Analysis of an Isolated Power Supply for Ultrafast Tracking Converters

    DEFF Research Database (Denmark)

    Nguyen-Duy, Khiem; Knott, Arnold; Andersen, Michael A. E.

    2014-01-01

    This paper presents the loss performance analysis of an isolated power supply that is designed for ultra-fast tracking converters. The results of the analysis provide insights into the operation of the proposed power supply, how each physical component contributes to the total loss, and how its...

  16. Fusion of optical flow based motion pattern analysis and silhouette classification for person tracking and detection

    NARCIS (Netherlands)

    Tangelder, J.W.H.; Lebert, E.; Burghouts, G.J.; Zon, K. van; Den Uyl, M.J.

    2014-01-01

    This paper presents a novel approach to detect persons in video by combining optical flow based motion analysis and silhouette based recognition. A new fast optical flow computation method is described, and its application in a motion based analysis framework unifying human tracking and detection is

  17. Image analysis used to count and measure etched tracks from ionizing radiation

    Science.gov (United States)

    Blanford, George E.; Schulz, Cindy K.

    1995-01-01

    We have developed techniques to use digitized scanning electron micrographs and computer image analysis programs to measure track densities in lunar soil grains and plastic dosimeters. Tracks in lunar samples are formed by highly ionizing solar energetic particles and cosmic rays during near surface exposure on the Moon. The track densities are related to the exposure conditions (depth and time). Distributions of the number of grains as a function of their track densities can reveal the modality of soil maturation. We worked on two samples identified for a consortium study of lunar weathering effects, 61221 and 67701. They were prepared by the lunar curator's staff as polished grain mounts that were etched in boiling 1 N NaOH for 6 h to reveal tracks. We determined that backscattered electron images taken at 10 percent contrast and approximately 50 percent brightness produced suitable high contrast images for analysis. We used the NIH Image program to cut out areas that were unsuitable for measurement such as edges, cracks, etc. We ascertained a gray-scale threshold of 25 to separate tracks from background. We used the computer to count everything that was two pixels or greater in size and to measure the area to obtain track densities. We found an excellent correlation with manual measurements for track densities below 1 x 10(exp 8) cm(exp -2). For track densities between 1 x 10(exp 8) cm(exp -2) to 1 x 10(exp 9) cm(exp -2) we found that a regression formula using the percentage area covered by tracks gave good agreement with manual measurements. We determined the track density distributions for 61221 and 67701. Sample 61221 is an immature sample, but not pristine. Sample 67701 is a submature sample that is very close to being fully mature. Because only 10 percent of the grains have track densities less than 10(exp 9) cm(exp -2), it is difficulty to determine whether the sample matured in situ or is a mixture of a mature and a submature soil. Although our analysis

  18. Plant Cell Population Tracking in a Honeycomb Structure Using an IMM Filter Based 3D Local Graph Matching Model.

    Science.gov (United States)

    Liu, Min; He, Yue; Qian, Weili; Wei, Yangliu; Liu, Xiaoyan

    2017-10-06

    Developing algorithms for plant cell population tracking is very critical for the modeling of plant cell growth pattern and gene expression dynamics. The tracking of plant cells in microscopic image stacks is very challenging for several reasons: (1) plant cells are densely packed in a specific honeycomb structure; (2) they are frequently dividing; (3) they are imaged in different layers within 3D image stacks. Based on an existing 2D local graph matching algorithm, this paper focuses on building a 3D plant cell matching model, by exploiting the cells' 3D spatiotemporal context. Furthermore, the Interacting Multi-Model filter (IMM) is combined with the 3D local graph matching model to track the plant cell population simultaneously. Because our tracking algorithm does not require the identification of "tracking seeds", the tracking stability and efficiency are greatly enhanced. Last, the plant cell lineages are achieved by associating the cell tracklets, using a maximum-a-posteriori (MAP) method. Compared with the 2D matching method, the experimental results on multiple datasets show that our proposed approach does not only greatly improve the tracking accuracy by 18%, but also successfully tracks the plant cells located at the high curvature primordial region, which is not addressed in previous work.

  19. Statistical tracking of tree-like tubular structures with efficient branching detection in 3D medical image data

    International Nuclear Information System (INIS)

    Wang, X; Heimann, T; Meinzer, H P; Wegner, I; Lo, P; Sumkauskaite, M; Puderbach, M; De Bruijne, M

    2012-01-01

    The segmentation of tree-like tubular structures such as coronary arteries and airways is an essential step for many 3D medical imaging applications. Statistical tracking techniques for the extraction of elongated structures have received considerable attention in recent years due to their robustness against image noise and pathological changes. However, most tracking methods are limited to a specific application and do not support branching structures efficiently. In this work, we present a novel statistical tracking approach for the extraction of different types of tubular structures with ringlike cross-sections. Domain-specific knowledge is learned from training data sets and integrated into the tracking process by simple adaption of parameters. In addition, an efficient branching detection algorithm is presented. This approach was evaluated by extracting coronary arteries from 32 CTA data sets and distal airways from 20 CT scans. These data sets were provided by the organizers of the workshop ‘3D Segmentation in the Clinic: A Grand Challenge II-Coronary Artery Tracking (CAT08)’ and ‘Extraction of Airways from CT 2009 (EXACT’09)’. On average, 81.5% overlap and 0.51 mm accuracy for the tracking of coronary arteries were achieved. For the extraction of airway trees, 51.3% of the total tree length, 53.6% of the total number of branches and a 4.98% false positive rate were attained. In both experiments, our approach is comparable to state-of-the-art methods. (paper)

  20. Statistical tracking of tree-like tubular structures with efficient branching detection in 3D medical image data.

    Science.gov (United States)

    Wang, X; Heimann, T; Lo, P; Sumkauskaite, M; Puderbach, M; de Bruijne, M; Meinzer, H P; Wegner, I

    2012-08-21

    The segmentation of tree-like tubular structures such as coronary arteries and airways is an essential step for many 3D medical imaging applications. Statistical tracking techniques for the extraction of elongated structures have received considerable attention in recent years due to their robustness against image noise and pathological changes. However, most tracking methods are limited to a specific application and do not support branching structures efficiently. In this work, we present a novel statistical tracking approach for the extraction of different types of tubular structures with ringlike cross-sections. Domain-specific knowledge is learned from training data sets and integrated into the tracking process by simple adaption of parameters. In addition, an efficient branching detection algorithm is presented. This approach was evaluated by extracting coronary arteries from 32 CTA data sets and distal airways from 20 CT scans. These data sets were provided by the organizers of the workshop '3D Segmentation in the Clinic: A Grand Challenge II-Coronary Artery Tracking (CAT08)' and 'Extraction of Airways from CT 2009 (EXACT'09)'. On average, 81.5% overlap and 0.51 mm accuracy for the tracking of coronary arteries were achieved. For the extraction of airway trees, 51.3% of the total tree length, 53.6% of the total number of branches and a 4.98% false positive rate were attained. In both experiments, our approach is comparable to state-of-the-art methods.

  1. Towards a better characterisation of radiation quality using track structure models

    Energy Technology Data Exchange (ETDEWEB)

    Kiefer, J.; Brend`amour, M. [Strahlenzentrum der Justus-Liebig-Universitat, Leihgesterner Weg, Giessen (Germany); Schmollack, J.U. [HMI, Berlin, (Germany)

    1997-03-01

    Many current track structure calculations are based on Monte-Carlo simulations which have to be performed for each individual case. Analytical models, on the other hand supply general formulations which can easily adapted to different conditions. Since they are continuous they oversimplify the real situation and are not suitable to be applied to very specific molecular structures. Nevertheless they are very useful and may even be more realistic than Monte-Carlo models as the molecules in the cell are more complicated than a composition of simple geometrical forms. Analytical models can be used to derive distributions of specific energies in various site sizes, range restricted LET and proximity functions. Experimental data support the main findings of these approaches. The quantities derived may serve as better descriptors of radiation quality than LET which is obviously inadequate but still widely used. The paper will illustrate these points by giving experimental examples both from the physical and the biological field. (authors)

  2. Bone assemblages track animal community structure over 40 years in an African savanna ecosystem.

    Science.gov (United States)

    Western, David; Behrensmeyer, Anna K

    2009-05-22

    Reconstructing ancient communities depends on how accurately fossil assemblages retain information about living populations. We report a high level of fidelity between modern bone assemblages and living populations based on a 40-year study of the Amboseli ecosystem in southern Kenya. Relative abundance of 15 herbivorous species recorded in the bone assemblage accurately tracks the living populations through major changes in community composition and habitat over intervals as short as 5 years. The aggregated bone sample provides an accurate record of community structure time-averaged over four decades. These results lay the groundwork for integrating paleobiological and contemporary ecological studies across evolutionary and ecological time scales. Bone surveys also provide a useful method of assessing population changes and community structure for modern vertebrates.

  3. Three-dimensional elasto-plastic soil modelling and analysis of sauropod tracks

    Directory of Open Access Journals (Sweden)

    Eugenio Sanz

    2016-06-01

    Full Text Available This paper reports the use of FEA (Finite Element Analysis to model dinosaur tracks. Satisfactory reproductions of sauropod ichnites were simulated using 3D numerical models of the elasto-plastic behaviour of soils. Though the modelling was done of ichnites in situ at the Miraflores I tracksite (Soria, Spain, the methodology could be applied to other tracksites to improve their ichnological interpretation and better understand how the type and state of the trodden sediment at the moment the track is created is a fundamental determinant of the morphology of the ichnite. The results obtained explain why the initial and commonly adopted hypothesis—that soft sediments become progressively more rigid and resistant at depth—is not appropriate at this tracksite. We explain why it is essential to consider a more rigid superficial layer (caused by desiccation overlying a softer layer that is extruded to form a displacement rim. Adult sauropods left trackways behind them. These tracks could be filled up with water due to phreatic level was close to the ground surface. The simulation provides us with a means to explain the differences between similar tracks (of different depths; with or without displacement rims in the various stratigraphic layers of the tracksite and to explain why temporary and variable conditions of humidity lead to these differences in the tracks. The simulations also demonstrate that track depth alone is insufficient to differentiate true tracks from undertracks and that other discrimination criteria need to be taken into account. The scarcity of baby sauropod tracks is explained because they are shallow and easily eroded.

  4. A simple apparatus for quick qualitative analysis of CR39 nuclear track detectorsa)

    Science.gov (United States)

    Gautier, D. C.; Kline, J. L.; Flippo, K. A.; Gaillard, S. A.; Letzring, S. A.; Hegelich, B. M.

    2008-10-01

    Quantifying the ion pits in Columbia Resin 39 (CR39) nuclear track detector from Thomson parabolas is a time consuming and tedious process using conventional microscope based techniques. A simple inventive apparatus for fast screening and qualitative analysis of CR39 detectors has been developed, enabling efficient selection of data for a more detailed analysis. The system consists simply of a green He-Ne laser and a high-resolution digital single-lens reflex camera. The laser illuminates the edge of the CR39 at grazing incidence and couples into the plastic, acting as a light pipe. Subsequently, the laser illuminates all ion tracks on the surface. A high-resolution digital camera is used to photograph the scattered light from the ion tracks, enabling one to quickly determine charge states and energies measured by the Thomson parabola.

  5. Automated counting and analysis of etched tracks in CR-39 plastic

    International Nuclear Information System (INIS)

    Majborn, B.

    1986-01-01

    An image analysis system has been set up which is capable of automated counting and analysis of etched nuclear particle tracks in plastic. The system is composed of an optical microscope, CCD camera, frame grabber, personal computer, monitor, and printer. The frame grabber acquires and displays images at video rate. It has a spatial resolution of 512 x 512 pixels with 8 bits of digitisation corresponding to 256 grey levels. The software has been developed for general image processing and adapted for the present purpose. Comparisons of automated and visual microscope counting of tracks in chemically etched CR-39 detectors are presented with emphasis on results of interest for practical radon measurements or neutron dosimetry, e.g. calibration factors, background track densities and variations in background. (author)

  6. Decorrelation correction for nanoparticle tracking analysis of dilute polydisperse suspensions in bulk flow

    Science.gov (United States)

    Hartman, John; Kirby, Brian

    2017-03-01

    Nanoparticle tracking analysis, a multiprobe single particle tracking technique, is a widely used method to quickly determine the concentration and size distribution of colloidal particle suspensions. Many popular tools remove non-Brownian components of particle motion by subtracting the ensemble-average displacement at each time step, which is termed dedrifting. Though critical for accurate size measurements, dedrifting is shown here to introduce significant biasing error and can fundamentally limit the dynamic range of particle size that can be measured for dilute heterogeneous suspensions such as biological extracellular vesicles. We report a more accurate estimate of particle mean-square displacement, which we call decorrelation analysis, that accounts for correlations between individual and ensemble particle motion, which are spuriously introduced by dedrifting. Particle tracking simulation and experimental results show that this approach more accurately determines particle diameters for low-concentration polydisperse suspensions when compared with standard dedrifting techniques.

  7. Uranium analysis in water flowing by the nuclear track detection method on solid dielectric materials

    International Nuclear Information System (INIS)

    Arambula, H.

    1981-01-01

    The objective of this experiment was threefold: to study the content of uranium in tap and spring water, to establish a technique for the quantitative analysis for the presence of uranium in liquids, and to test the qualities as detector fission fragments of three solid insulator materials using the nuclear tracks register method. The latter allows for the measurement of concentrations of fissile elements up to 10 -12 gr/gm employing (n, f.f.) reactions. The test samples were of tap water and of water from six fresh water springs located in San Luis Potosi and Guanajuato. Glass, lexan polycarbonate and muscovite mica were the detector materials used. The technique consisted in evaporating the water from the test samples, which had been previously placed upon the detector materials, and in doing the same for the standard control sample solutions having known concentrations of uranium. All the samples were then irradiated with thermal neutrons, and the 235 U, present in the samples, fissioned. The fission fragments produced permanent damage on the detectors, known as latent tracks. A specific corroding chemical was then applied to each detector which caused the latent tracks to dissolve into grooves. Known as etching tracks, these grooves were microscopically visible and could be measured for track density (tracks/mm 2 ). The concentrations of uranium present in the test samples were measured by comparing the track densities of the test samples with those of the standard control samples. The concentration of uranium found in the spring water samples ranged from 0.09 to 0.89 μqr.U/1, and those of tap water, from 0.18 to 0.19 μqr U/1. Lexan polycarbonate and muscovite mica proved to be better, as detectors, than glass. Glass for quantitative analysis, we found not recommendable as a detector material because of its alterable composition in the presence of uranium. (author)

  8. Monte-Carlo Simulations of Heavy Ions Track Structures and Applications

    Science.gov (United States)

    Plante, Ianik; Cucinotta, Francia A.

    2013-01-01

    In space, astronauts are exposed to protons, high ]energy heavy (HZE) ions that have a high charge (Z) and energy (E), and secondary radiation, including neutrons and recoil nuclei produced by nuclear reactions in spacecraft walls or in tissue. The astronauts can only be partly shielded from these particles. Therefore, on travelling to Mars, it is estimated that every cell nucleus in an astronaut fs body would be hit by a proton or secondary electron (e.g., electrons of the target atoms ionized by the HZE ion) every few days and by an HZE ion about once a month. The risks related to these heavy ions are not well known and of concern for long duration space exploration missions. Medical ion therapy is another situation where human beings can be irradiated by heavy ions, usually to treat cancer. Heavy ions have a peculiar track structure characterized by high levels of energy ]deposition clustering, especially in near the track ends in the so ]called eBragg peak f region. In radiotherapy, these features of heavy ions can provide an improved dose conformation with respect to photons, also considering that the relative biological effectiveness (RBE) of therapeutic ions in the plateau region before the peak is sufficiently low. Therefore, several proton and carbon ion therapy facilities are under construction at this moment

  9. EVA: laparoscopic instrument tracking based on Endoscopic Video Analysis for psychomotor skills assessment.

    Science.gov (United States)

    Oropesa, Ignacio; Sánchez-González, Patricia; Chmarra, Magdalena K; Lamata, Pablo; Fernández, Alvaro; Sánchez-Margallo, Juan A; Jansen, Frank Willem; Dankelman, Jenny; Sánchez-Margallo, Francisco M; Gómez, Enrique J

    2013-03-01

    The EVA (Endoscopic Video Analysis) tracking system is a new system for extracting motions of laparoscopic instruments based on nonobtrusive video tracking. The feasibility of using EVA in laparoscopic settings has been tested in a box trainer setup. EVA makes use of an algorithm that employs information of the laparoscopic instrument's shaft edges in the image, the instrument's insertion point, and the camera's optical center to track the three-dimensional position of the instrument tip. A validation study of EVA comprised a comparison of the measurements achieved with EVA and the TrEndo tracking system. To this end, 42 participants (16 novices, 22 residents, and 4 experts) were asked to perform a peg transfer task in a box trainer. Ten motion-based metrics were used to assess their performance. Construct validation of the EVA has been obtained for seven motion-based metrics. Concurrent validation revealed that there is a strong correlation between the results obtained by EVA and the TrEndo for metrics, such as path length (ρ = 0.97), average speed (ρ = 0.94), or economy of volume (ρ = 0.85), proving the viability of EVA. EVA has been successfully validated in a box trainer setup, showing the potential of endoscopic video analysis to assess laparoscopic psychomotor skills. The results encourage further implementation of video tracking in training setups and image-guided surgery.

  10. What do cognitively intact older people think about the use of electronic tracking devices for people with dementia? A preliminary analysis.

    Science.gov (United States)

    Landau, Ruth; Werner, Shirli; Auslander, Gail K; Shoval, Noam; Heinik, Jeremia

    2010-12-01

    The issue of using advanced tracking technologies such as Global Positioning Systems (GPS) is part of a wider debate on the acceptability of assistive technology to older people with dementia. The use of GPS can enhance the personal safety of older people by alerting caregivers to potential dangers or adverse events that might threaten the individual's health and safety, but at the same time it raises ethical concerns. This study examines the attitudes of cognitively intact older people toward the use of tracking devices for people with dementia. The analysis is based on quantitative data from a convenience sample (n = 42) and qualitative data gathered from two focus groups of cognitively intact older people in Israel. Whereas cognitively intact older people clearly differentiate between themselves and people with dementia, they support the use of tracking devices when dementia is either formally diagnosed or its signs are evident. They value the safety of people with dementia above preserving their autonomy. Although they perceive the decision to use tracking devices as an intra-family issue, they expect guidance from professional caregivers of people with dementia. The acceptability of tracking devices is dependent on their appropriate weight, size and ease of use. Cognitively intact older people favor the idea of tracking people with dementia. To facilitate family decision-making on the use of tracking devices, structured meetings guided by professionals and including persons with dementia and their family caregivers are suggested.

  11. DISCRETE-TIME VARIABLE STRUCTURE CONTROLLER FOR AIRCRAFT FLIGHT ANGLE TRACKING

    OpenAIRE

    Iskrenovic-Momcilovic, Olivera

    2014-01-01

    The paper presents the longitudinal, short-period aircraft dynamics and its application on the climb angle tracking. For the aircraft flight angle tracking the stable system centre technique is developed for controlling the output in a discrete-time non-minimum phase causal system using the sliding mode control. The developed discrete-time stable system centre technique transforms the output tracking problem to a corresponding state variable tracking problem by asymptotically identifying the ...

  12. Incipient Social Groups: An Analysis via In-Vivo Behavioral Tracking.

    Directory of Open Access Journals (Sweden)

    Jamin Halberstadt

    Full Text Available Social psychology is fundamentally the study of individuals in groups, yet there remain basic unanswered questions about group formation, structure, and change. We argue that the problem is methodological. Until recently, there was no way to track who was interacting with whom with anything approximating valid resolution and scale. In the current study we describe a new method that applies recent advances in image-based tracking to study incipient group formation and evolution with experimental precision and control. In this method, which we term "in vivo behavioral tracking," we track individuals' movements with a high definition video camera mounted atop a large field laboratory. We report results of an initial study that quantifies the composition, structure, and size of the incipient groups. We also apply in-vivo spatial tracking to study participants' tendency to cooperate as a function of their embeddedness in those crowds. We find that participants form groups of seven on average, are more likely to approach others of similar attractiveness and (to a lesser extent gender, and that participants' gender and attractiveness are both associated with their proximity to the spatial center of groups (such that women and attractive individuals are more likely than men and unattractive individuals to end up in the center of their groups. Furthermore, participants' proximity to others early in the study predicted the effort they exerted in a subsequent cooperative task, suggesting that submergence in a crowd may predict social loafing. We conclude that in vivo behavioral tracking is a uniquely powerful new tool for answering longstanding, fundamental questions about group dynamics.

  13. Incipient Social Groups: An Analysis via In-Vivo Behavioral Tracking.

    Science.gov (United States)

    Halberstadt, Jamin; Jackson, Joshua Conrad; Bilkey, David; Jong, Jonathan; Whitehouse, Harvey; McNaughton, Craig; Zollmann, Stefanie

    2016-01-01

    Social psychology is fundamentally the study of individuals in groups, yet there remain basic unanswered questions about group formation, structure, and change. We argue that the problem is methodological. Until recently, there was no way to track who was interacting with whom with anything approximating valid resolution and scale. In the current study we describe a new method that applies recent advances in image-based tracking to study incipient group formation and evolution with experimental precision and control. In this method, which we term "in vivo behavioral tracking," we track individuals' movements with a high definition video camera mounted atop a large field laboratory. We report results of an initial study that quantifies the composition, structure, and size of the incipient groups. We also apply in-vivo spatial tracking to study participants' tendency to cooperate as a function of their embeddedness in those crowds. We find that participants form groups of seven on average, are more likely to approach others of similar attractiveness and (to a lesser extent) gender, and that participants' gender and attractiveness are both associated with their proximity to the spatial center of groups (such that women and attractive individuals are more likely than men and unattractive individuals to end up in the center of their groups). Furthermore, participants' proximity to others early in the study predicted the effort they exerted in a subsequent cooperative task, suggesting that submergence in a crowd may predict social loafing. We conclude that in vivo behavioral tracking is a uniquely powerful new tool for answering longstanding, fundamental questions about group dynamics.

  14. Structured light-based motion tracking in the limited view of an MR head coil

    International Nuclear Information System (INIS)

    Erikshøj, M.; Olesen, O.V.; Conradsen, K.; Højgaard, L.; Larsen, R.

    2013-01-01

    A markerless motion tracking (MT) system developed for use in PET brain imaging has been tested in the limited field of view (FOV) of the MR head coil from the Siemens Biograph mMR. The system is a 3D surface scanner that uses structured light (SL) to create point cloud reconstructions of the facial surface. The point clouds are continuously realigned to a reference scan to obtain pose estimates. The system has been tested on a mannequin head performing controlled rotational and translational axial movements within the head coil outside the range of the magnetic field. The RMS of the residual error of the rotation was 0.11° and the RMS difference in the translation with the control system was 0.17 mm, within the trackable range of movement

  15. Development of a Full-Depth Wheel Tracking Test for Asphalt Pavement Structure: Methods and Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Hui Wang

    2016-01-01

    Full Text Available The rutting performance of asphalt pavement structure relies on the high temperature properties of asphalt mixture as well as the pavement structure and thickness. In order to investigate the influence of the structure and thickness, a full-depth wheel tracking test is developed in this research by improving the conventional wheel tracking test apparatus. The newly proposed test method is capable of varying its load speed and load size, controlling its specimen temperature gradient, and simulating the support conditions of actual asphalt pavement. The full-depth wheel tracking test based rutting performance evaluation of different asphalt pavement structures indicates that it is not reasonable to explain the rutting performance of asphalt pavement structure from the point of view of single-layer asphalt mixture rutting performance. The developed full-depth wheel tracking test can be used to distinguish rutting performance of different asphalt pavement structures, and two of five typical asphalt pavement structures commonly used in Shanxi Province were suggested for use in practical engineering.

  16. Streaming, Tracking and Reading Achievement: A Multilevel Analysis of Students in 40 Countries

    Science.gov (United States)

    Chiu, Ming Ming; Chow, Bonnie Wing-Yin; Joh, Sung Wook

    2017-01-01

    Grouping similar students together within schools ("streaming") or classrooms ("tracking") based on past literacy skills (reported by parents), family socioeconomic status (SES) or reading attitudes might affect their reading achievement. Our multilevel analysis of the reading tests of 208,057 fourth-grade students across 40…

  17. FECAL SOURCE TRACKING BY ANTIBIOTIC RESISTANCE ANALYSIS ON A WATERSHED EXHIBITING LOW RESISTANCE

    Science.gov (United States)

    The ongoing development of microbial source tracking has made it possible to identify contamination sources with varying accuracy, depending on the method used. The purpose of this study was done to test the efficiency of the antibiotic resistance analysis (ARA) method under low ...

  18. Functional evaluation of peripheral nerve regeneration in the rat : walking track analysis

    NARCIS (Netherlands)

    Varejao, ASP; Meek, MF; Patricio, JAB; Cabrita, AMS

    2001-01-01

    The experimental model of choice for many peripheral nerve investigators is the rat. Walking track analysis is a useful tool in the evaluation of functional peripheral nerve recovery in the rat. This quantitative method of analyzing hind limbs performance by examining footprints, known as the

  19. Tracking Problem Solving by Multivariate Pattern Analysis and Hidden Markov Model Algorithms

    Science.gov (United States)

    Anderson, John R.

    2012-01-01

    Multivariate pattern analysis can be combined with Hidden Markov Model algorithms to track the second-by-second thinking as people solve complex problems. Two applications of this methodology are illustrated with a data set taken from children as they interacted with an intelligent tutoring system for algebra. The first "mind reading" application…

  20. Cluster analysis of HZE particle tracks as applied to space radiobiology problems

    International Nuclear Information System (INIS)

    Batmunkh, M.; Bayarchimeg, L.; Lkhagva, O.; Belov, O.

    2013-01-01

    A cluster analysis is performed of ionizations in tracks produced by the most abundant nuclei in the charge and energy spectra of the galactic cosmic rays. The frequency distribution of clusters is estimated for cluster sizes comparable to the DNA molecule at different packaging levels. For this purpose, an improved K-mean-based algorithm is suggested. This technique allows processing particle tracks containing a large number of ionization events without setting the number of clusters as an input parameter. Using this method, the ionization distribution pattern is analyzed depending on the cluster size and particle's linear energy transfer

  1. The analysis of frequency domain characteristics of emotional images in eye-tracking experiment

    Science.gov (United States)

    Fan, Boqiang; Ma, Huimin; Wang, Xiang

    2015-07-01

    Although recently eye-tracking method has been introduced into behavioral experiments based on dot-probe paradigm, some characteristics in eye-tracking data do not draw as much attention as traditional characteristics like reaction time. It is also necessary to associate eye-tracking data to characteristics of images shown in experiments. In this research, new variables, such as fixation length, times of fixation and times of eye movement, in eye-tracking data were extracted from a behavioral experiment based on dot probe paradigm. They were analyzed and compared to traditional reaction time. After the analysis of positive and negative scenery images, parameters such as hue frequency spectrum PAR (Peak to Average Ratio) were extracted and showed difference between negative and positive images. These parameters of emotional images could discriminate scenery images according to their emotions in an SVM classifier well. Besides, it was found that images' hue frequency spectrum PAR is obviously relevant to eye-tracking statistics. When the dot was on the negative side, negative images' hue frequency spectrum PAR and horizontal eye-jumps confirmed to hyperbolic distribution, while that of positive images was linear with horizontal eye-jumps. The result could help to explain the mechanism of human's attention and boost the study in computer vision.

  2. The Tracking Meteogram, an AWIPS II Tool for Time-Series Analysis

    Science.gov (United States)

    Burks, Jason Eric; Sperow, Ken

    2015-01-01

    A new tool has been developed for the National Weather Service (NWS) Advanced Weather Interactive Processing System (AWIPS) II through collaboration between NASA's Short-term Prediction Research and Transition (SPoRT) and the NWS Meteorological Development Laboratory (MDL). Referred to as the "Tracking Meteogram", the tool aids NWS forecasters in assessing meteorological parameters associated with moving phenomena. The tool aids forecasters in severe weather situations by providing valuable satellite and radar derived trends such as cloud top cooling rates, radial velocity couplets, reflectivity, and information from ground-based lightning networks. The Tracking Meteogram tool also aids in synoptic and mesoscale analysis by tracking parameters such as the deepening of surface low pressure systems, changes in surface or upper air temperature, and other properties. The tool provides a valuable new functionality and demonstrates the flexibility and extensibility of the NWS AWIPS II architecture. In 2014, the operational impact of the tool was formally evaluated through participation in the NOAA/NWS Operations Proving Ground (OPG), a risk reduction activity to assess performance and operational impact of new forecasting concepts, tools, and applications. Performance of the Tracking Meteogram Tool during the OPG assessment confirmed that it will be a valuable asset to the operational forecasters. This presentation reviews development of the Tracking Meteogram tool, performance and feedback acquired during the OPG activity, and future goals for continued support and extension to other application areas.

  3. Charged-particle track analysis, thermoluminescence and microcratering studies of lunar samples

    International Nuclear Information System (INIS)

    Durrani, S.A.

    1977-01-01

    Studies of lunar samples (from both Apollo and Luna missions) have been carried out, using track analysis and thermoluminescence (t.l.) techniques, with a view to shedding light on the radiation and temperature histories of the Moon. In addition, microcraters in lunar glasses have been studied in order to elucidate the cosmic-dust impact history of the lunar regolith. In tracks studies, the topics discussed include the stabilizing effect of the thermal annealing of fossil tracks due to the lunar temperature cycle; the 'radiation annealing' of fresh heavy-ion tracks by large doses of protons (to simulate the effect of lunar radiation-damage on track registration); and correction factors for the anisotropic etching of crystals which are required in reconstructing the exposure history of lunar grains. An abundance ratio of ca. (1.1 + 0.3) x 10 -3 has been obtained, by the differential annealing technique, for the nuclei beyond the iron group to those within that group in the cosmic rays incident on the Moon. The natural t.l. of lunar samples has been used to estimate their effective storage temperature and mean depth below the surface. The results of the study of natural and artificially produced microcraters have been studied. (author)

  4. Structural functional associations of the orbit in thyroid eye disease: Kalman filters to track extraocular rectal muscles

    Science.gov (United States)

    Chaganti, Shikha; Nelson, Katrina; Mundy, Kevin; Luo, Yifu; Harrigan, Robert L.; Damon, Steve; Fabbri, Daniel; Mawn, Louise; Landman, Bennett

    2016-03-01

    Pathologies of the optic nerve and orbit impact millions of Americans and quantitative assessment of the orbital structures on 3-D imaging would provide objective markers to enhance diagnostic accuracy, improve timely intervention, and eventually preserve visual function. Recent studies have shown that the multi-atlas methodology is suitable for identifying orbital structures, but challenges arise in the identification of the individual extraocular rectus muscles that control eye movement. This is increasingly problematic in diseased eyes, where these muscles often appear to fuse at the back of the orbit (at the resolution of clinical computed tomography imaging) due to inflammation or crowding. We propose the use of Kalman filters to track the muscles in three-dimensions to refine multi-atlas segmentation and resolve ambiguity due to imaging resolution, noise, and artifacts. The purpose of our study is to investigate a method of automatically generating orbital metrics from CT imaging and demonstrate the utility of the approach by correlating structural metrics of the eye orbit with clinical data and visual function measures in subjects with thyroid eye disease. The pilot study demonstrates that automatically calculated orbital metrics are strongly correlated with several clinical characteristics. Moreover, it is shown that the superior, inferior, medial and lateral rectus muscles obtained using Kalman filters are each correlated with different categories of functional deficit. These findings serve as foundation for further investigation in the use of CT imaging in the study, analysis and diagnosis of ocular diseases, specifically thyroid eye disease.

  5. Animal tracking meets migration genomics: transcriptomic analysis of a partially migratory bird species.

    Science.gov (United States)

    Franchini, Paolo; Irisarri, Iker; Fudickar, Adam; Schmidt, Andreas; Meyer, Axel; Wikelski, Martin; Partecke, Jesko

    2017-06-01

    Seasonal migration is a widespread phenomenon, which is found in many different lineages of animals. This spectacular behaviour allows animals to avoid seasonally adverse environmental conditions to exploit more favourable habitats. Migration has been intensively studied in birds, which display astonishing variation in migration strategies, thus providing a powerful system for studying the ecological and evolutionary processes that shape migratory behaviour. Despite intensive research, the genetic basis of migration remains largely unknown. Here, we used state-of-the-art radio-tracking technology to characterize the migratory behaviour of a partially migratory population of European blackbirds (Turdus merula) in southern Germany. We compared gene expression of resident and migrant individuals using high-throughput transcriptomics in blood samples. Analyses of sequence variation revealed a nonsignificant genetic structure between blackbirds differing by their migratory phenotype. We detected only four differentially expressed genes between migrants and residents, which might be associated with hyperphagia, moulting and enhanced DNA replication and transcription. The most pronounced changes in gene expression occurred between migratory birds depending on when, in relation to their date of departure, blood was collected. Overall, the differentially expressed genes detected in this analysis may play crucial roles in determining the decision to migrate, or in controlling the physiological processes required for the onset of migration. These results provide new insights into, and testable hypotheses for, the molecular mechanisms controlling the migratory phenotype and its underlying physiological mechanisms in blackbirds and other migratory bird species. © 2017 John Wiley & Sons Ltd.

  6. The Tracking and Analysis Framework (TAF): A tool for the integrated assessment of acid deposition

    International Nuclear Information System (INIS)

    Bloyd, C.N.; Henrion, M.; Marnicio, R.J.

    1995-01-01

    A major challenge that has faced policy makers concerned with acid deposition is obtaining an integrated view of the underlying science related to acid deposition. In response to this challenge, the US Department of Energy is sponsoring the development of an integrated Tracking and Analysis Framework (TAF) which links together the key acid deposition components of emissions, air transport, atmospheric deposition, and aquatic effects in a single modeling structure. The goal of TAF is to integrate credible models of the scientific and technical issues into an assessment framework that can directly address key policy issues, and in doing so act as a bridge between science and policy. Key objectives of TAF are to support coordination and communication among scientific researchers; to support communications with policy makers, and to provide rapid response for analyzing newly emerging policy issues; and to provide guidance for prioritizing research programs. This paper briefly describes how TAF was formulated to meet those objectives and the underlying principals which form the basis for its development

  7. Track structure based modelling of light ion radiation effects on nuclear and mitochondrial DNA

    Science.gov (United States)

    Schmitt, Elke; Ottolenghi, Andrea; Dingfelder, Michael; Friedland, Werner; Kundrat, Pavel; Baiocco, Giorgio

    2016-07-01

    Space radiation risk assessment is of great importance for manned spaceflights in order to estimate risks and to develop counter-measures to reduce them. Biophysical simulations with PARTRAC can help greatly to improve the understanding of initial biological response to ionizing radiation. Results from modelling radiation quality dependent DNA damage and repair mechanisms up to chromosomal aberrations (e.g. dicentrics) can be used to predict radiation effects depending on the kind of mixed radiation field exposure. Especially dicentric yields can serve as a biomarker for an increased risk due to radiation and hence as an indicator for the effectiveness of the used shielding. PARTRAC [1] is a multi-scale biophysical research MC code for track structure based initial DNA damage and damage response modelling. It integrates physics, radiochemistry, detailed nuclear DNA structure and molecular biology of DNA repair by NHEJ-pathway to assess radiation effects on cellular level [2]. Ongoing experiments with quasi-homogeneously distributed compared to sub-micrometre focused bunches of protons, lithium and carbon ions allow a separation of effects due to DNA damage complexity on nanometre scale from damage clustering on (sub-) micrometre scale [3, 4]. These data provide an unprecedented benchmark for the DNA damage response model in PARTRAC and help understand the mechanisms leading to cell killing and chromosomal aberrations (e.g. dicentrics) induction. A large part of space radiation is due to a mixed ion field of high energy protons and few heavier ions that can be only partly absorbed by the shielding. Radiation damage induced by low-energy ions significantly contributes to the high relative biological efficiency (RBE) of ion beams around Bragg peak regions. For slow light ions the physical cross section data basis in PARTRAC has been extended to investigate radiation quality effects in the Bragg peak region [5]. The resulting range and LET values agree with ICRU data

  8. The analysis of track chamber photographs using flying spot digitizers

    CERN Multimedia

    Powell, Brian W

    1966-01-01

    A vast quantity of data pours from the experiments on particle accelerators throughout the world. For example, over 300 000 photographs per week came from the three bubble chambers operating on the CERN PS at the end of 1965. The conventional method of processing these bubble chamber photographs is for each one of them to be examined ('scanned') to see whether it records an interesting particle interaction. The interesting photographs are then passed to hand operated measuring machines to obtain precise measurements of the particle trajectories recorded on the film. Similar measurements are carried out on photographs taken in film spark chamber experiments. This article on the Flying Spot Digitizers at CERN describes one of the most fruitful attempts to speed and make more accurate the process of analysis of bubble and spark chamber photographs. There are two types of Flying Spot Digitizer at CERN — the HPD or Hough Powell Device (named after Professor Hough and the author who, together, initiated the devel...

  9. Uranium analysis by neutron induced fissionography method using solid state nuclear track detectors

    International Nuclear Information System (INIS)

    Akyuez, T.; Tretyakova, S. P.; Guezel, T.; Akyuz, S.

    1999-01-01

    In this study total twenty samples (eight reference materials and twelve sediment samples) were analysed for their uranium content which is in the range of 1-17 μg/g, by neutron induced fissionography (NIF) method using solid state nuclear track detectors (SSNTDs) in comparison with the results of neutron activation analysis (NAA), delayed neutron counting (DNC) technique or fluorometric method. It is found that NIF method using SSNTDs is very sensitive for analysis of uranium

  10. Uranium analysis by neutron induced fissionography method using solid state nuclear track detectors

    CERN Document Server

    Akyuez, T; Guezel, T; Akyuz, S

    1999-01-01

    In this study total twenty samples (eight reference materials and twelve sediment samples) were analysed for their uranium content which is in the range of 1-17 mu g/g, by neutron induced fissionography (NIF) method using solid state nuclear track detectors (SSNTDs) in comparison with the results of neutron activation analysis (NAA), delayed neutron counting (DNC) technique or fluorometric method. It is found that NIF method using SSNTDs is very sensitive for analysis of uranium.

  11. Structural Analysis of Plate Based Tensegrity Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Damkilde, Lars

    2013-01-01

    Plate tensegrity structures combine tension cables with a cross laminated timber plate and can then form e.g. a roof structure. The topology of plate tensegrity structures is investigated through a parametric investigation. Plate tensegrity structures are investigated, and a method...

  12. Structural Analysis of Communication Development.

    Science.gov (United States)

    Conville, Richard L.

    This paper discusses the question of the legitimacy of applying structural analysis to actual human behavior and illustrates its legitimacy by using the reasoning in an essay by Paul Ricoeur. It then asks if the principles of communication development (obliqueness, exchange, and dying) derived from Helen Keller's experience of communication…

  13. Random Vibration Analysis of Train Moving over Slab Track on Bridge under Track Irregularities and Earthquakes by Pseudoexcitation Method

    Directory of Open Access Journals (Sweden)

    Zhiping Zeng

    2015-01-01

    Full Text Available This paper investigates the random vibration and the dynamic reliability of operation stability of train moving over slab track on bridge under track irregularities and earthquakes by the pseudoexcitation method (PEM. Each vehicle is modeled by multibody dynamics. The track and bridge is simulated by a rail-slab-girder-pier interaction finite element model. The coupling equations of motion are established based on the wheel-rail interaction relationship. The random excitations of the track irregularities and seismic accelerations are transformed into a series of deterministic pseudoexcitations by PEM. The time-dependent power spectral densities (PSDs of the random vibration of the system are obtained by step-by-step integration method, and the corresponding dynamic reliability is estimated based on the first-passage failure criterion. A case study is then presented in which a high-speed train moves over a slab track resting on a simply supported girder bridge. The PSD characteristics of the random vibration of the bridge and train are analyzed, the influence of the wheel-rail-bridge interaction models on the random vibration of the bridge and train is discussed, and furthermore the influence of train speed, earthquake intensity, and pier height on the dynamic reliability of train operation stability is studied.

  14. Tracking molecular structure deformation of nitrobenzene and its torsion-vibration coupling by intense pumping CARS

    Science.gov (United States)

    Wang, Chang; Wu, Hong-Lin; Song, Yun-Fei; He, Xing; Yang, Yan-Qiang; Tan, Duo-Wang

    2016-11-01

    The structural deformation induced by intense laser field of liquid nitrobenzene (NB) molecule, a typical molecule with restricting internal rotation, is tracked by time- and frequency-resolved coherent anti-Stokes. Raman spectroscopy (CARS) technique with an intense pump laser. The CARS spectra of liquid NB show that the NO2 torsional mode couples with the NO2 symmetric stretching mode, and the NB molecule undergoes ultrafast structural deformation with a relaxation time of 265 fs. The frequency of NO2 torsional mode in liquid NB (42 cm-1) at room temperature is found from the sum and difference combination bands involving the NO2 symmetric stretching mode and torsional mode in time- and frequency-resolved CARS spectra. Project supported by the National Natural Science Foundation of China (Grant Nos. 21173063 and 21203047), the Foundation of Heilongjiang Bayi Agricultural University, China (Grant No. XZR2014-16), NSAF (Grant No. U1330106), and the Special Research Project of National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, China Academy of Engineering Physics (Grant No. 2012-S-07).

  15. In Situ Chemical Mapping and Analysis of Stardust Impact Tracks: Isolation of Cometary Signal

    Science.gov (United States)

    Ishii, H. A.; Brennan, S.; Luening, K.; Ignatyev, K.; Pianetta, P.; Bradley, J. P.

    2006-12-01

    Since the Stardust mission returned in January 2006 with particles from the coma of Comet P/Wild-2, several research groups at synchrotrons around the world have been involved in the Preliminary Examination of Stardust comet dust captured in silica aerogel cells. In situ analysis by x-ray microprobe of intact particle deceleration tracks, impact tracks, in the aerogel collection medium provides the chemical distribution of the cometary material. This includes the typically larger-grained and robust particles deposited at the track terminus as well as the more fine-grained and dispersed material that is deposited near the track entrance and is less accessible to traditional mineralogy studies by TEM. X-ray microprobes on synchrotron sources are powerful tools that can provide compositions of elements present only in trace quantities. Chemical maps and quantitative compositions of impact tracks and their terminal particles have been reported for the set of Stardust samples analyzed during the Preliminary Examination. A significant issue that arose in this process was how to distinguish the background contribution arising from contamination in the aerogel collection medium itself. These elements are present in addition to the ubiquitous Si in the aerogel, vary in concentration from cell to cell and include elements such as Fe and Ca that are relevant to the mineralogy and chemistry of the Stardust samples. Proper removal of this background is necessary for accurate results. We present an approach based on thresholds for distinguishing between the synchrotron x-ray fluorescence originating from the cometary material and that originating from the aerogel and contaminants. Results of this method applied to Stardust tracks are also presented. This approach may be used on any sample in a matrix containing elements of interest in the sample itself.

  16. Dynamic Analysis of the High Speed Train and Slab Track Nonlinear Coupling System with the Cross Iteration Algorithm

    OpenAIRE

    Xiaoyan Lei; Shenhua Wu; Bin Zhang

    2016-01-01

    A model for dynamic analysis of the vehicle-track nonlinear coupling system is established by the finite element method. The whole system is divided into two subsystems: the vehicle subsystem and the track subsystem. Coupling of the two subsystems is achieved by equilibrium conditions for wheel-to-rail nonlinear contact forces and geometrical compatibility conditions. To solve the nonlinear dynamics equations for the vehicle-track coupling system, a cross iteration algorithm and a relaxation ...

  17. Spatial and Temporal Analysis on the Distribution of Active Radio-Frequency Identification (RFID) Tracking Accuracy with the Kriging Method

    OpenAIRE

    Liu, Xin; Shannon, Jeremy; Voun, Howard; Truijens, Martijn; Chi, Hung-Lin; Wang, Xiangyu

    2014-01-01

    Radio frequency identification (RFID) technology has already been applied in a number of areas to facilitate the tracking process. However, the insufficient tracking accuracy of RFID is one of the problems that impedes its wider application. Previous studies focus on examining the accuracy of discrete points RFID, thereby leaving the tracking accuracy of the areas between the observed points unpredictable. In this study, spatial and temporal analysis is applied to interpolate the continuous d...

  18. On the consistency of Monte Carlo track structure DNA damage simulations

    Energy Technology Data Exchange (ETDEWEB)

    Pater, Piotr, E-mail: piotr.pater@mail.mcgill.ca; Seuntjens, Jan; El Naqa, Issam [McGill University, Montreal, Quebec H3G 1A4 (Canada); Bernal, Mario A. [Instituto de Fisica Gleb Wataghin, Universidade Estadual de Campinas, Campinas 13083-859 (Brazil)

    2014-12-15

    Purpose: Monte Carlo track structures (MCTS) simulations have been recognized as useful tools for radiobiological modeling. However, the authors noticed several issues regarding the consistency of reported data. Therefore, in this work, they analyze the impact of various user defined parameters on simulated direct DNA damage yields. In addition, they draw attention to discrepancies in published literature in DNA strand break (SB) yields and selected methodologies. Methods: The MCTS code Geant4-DNA was used to compare radial dose profiles in a nanometer-scale region of interest (ROI) for photon sources of varying sizes and energies. Then, electron tracks of 0.28 keV–220 keV were superimposed on a geometric DNA model composed of 2.7 × 10{sup 6} nucleosomes, and SBs were simulated according to four definitions based on energy deposits or energy transfers in DNA strand targets compared to a threshold energy E{sub TH}. The SB frequencies and complexities in nucleosomes as a function of incident electron energies were obtained. SBs were classified into higher order clusters such as single and double strand breaks (SSBs and DSBs) based on inter-SB distances and on the number of affected strands. Results: Comparisons of different nonuniform dose distributions lacking charged particle equilibrium may lead to erroneous conclusions regarding the effect of energy on relative biological effectiveness. The energy transfer-based SB definitions give similar SB yields as the one based on energy deposit when E{sub TH} ≈ 10.79 eV, but deviate significantly for higher E{sub TH} values. Between 30 and 40 nucleosomes/Gy show at least one SB in the ROI. The number of nucleosomes that present a complex damage pattern of more than 2 SBs and the degree of complexity of the damage in these nucleosomes diminish as the incident electron energy increases. DNA damage classification into SSB and DSB is highly dependent on the definitions of these higher order structures and their

  19. On the consistency of Monte Carlo track structure DNA damage simulations

    International Nuclear Information System (INIS)

    Pater, Piotr; Seuntjens, Jan; El Naqa, Issam; Bernal, Mario A.

    2014-01-01

    Purpose: Monte Carlo track structures (MCTS) simulations have been recognized as useful tools for radiobiological modeling. However, the authors noticed several issues regarding the consistency of reported data. Therefore, in this work, they analyze the impact of various user defined parameters on simulated direct DNA damage yields. In addition, they draw attention to discrepancies in published literature in DNA strand break (SB) yields and selected methodologies. Methods: The MCTS code Geant4-DNA was used to compare radial dose profiles in a nanometer-scale region of interest (ROI) for photon sources of varying sizes and energies. Then, electron tracks of 0.28 keV–220 keV were superimposed on a geometric DNA model composed of 2.7 × 10 6 nucleosomes, and SBs were simulated according to four definitions based on energy deposits or energy transfers in DNA strand targets compared to a threshold energy E TH . The SB frequencies and complexities in nucleosomes as a function of incident electron energies were obtained. SBs were classified into higher order clusters such as single and double strand breaks (SSBs and DSBs) based on inter-SB distances and on the number of affected strands. Results: Comparisons of different nonuniform dose distributions lacking charged particle equilibrium may lead to erroneous conclusions regarding the effect of energy on relative biological effectiveness. The energy transfer-based SB definitions give similar SB yields as the one based on energy deposit when E TH ≈ 10.79 eV, but deviate significantly for higher E TH values. Between 30 and 40 nucleosomes/Gy show at least one SB in the ROI. The number of nucleosomes that present a complex damage pattern of more than 2 SBs and the degree of complexity of the damage in these nucleosomes diminish as the incident electron energy increases. DNA damage classification into SSB and DSB is highly dependent on the definitions of these higher order structures and their implementations. The authors

  20. Multiple Gate Delay Tracking Structures for GNSS Signals and Their Evaluation with Simulink, SystemC, and VHDL

    Directory of Open Access Journals (Sweden)

    Heikki Hurskainen

    2008-01-01

    Full Text Available Accurate delay tracking in multipath environments is one of the prerequisites of modern GNSS receivers. Several solutions have been proposed in the literature, both feedback and feedforward. However, this topic is still under active research focus, especially for mass-market receivers, where selection of lowcomplexity, nonpatented methods is preferred. Among the most encountered delay tracking structures implemented in today's receivers, we have the narrow correlator and the double-delta correlators. Both are heavily covered by various patents. The purpose of this paper is to introduce a new, generic structure, called multiple gate delay (MGD structure, which covers also the patented correlators but offers much more flexibility in the design process. We show how the design parameters of such a structure can be optimized, we argue the performance of this structure via detailed simulation results based on various simulators, such as Matlab/Simulink-based tool, GRANADA, and we test the implementation feasibility of MGD structures on actual devices, via SystemC and FPGA prototyping. One of the main advantages of the proposed structure is its high degree of flexibility, which allows the designer to choose among, to the authors' knowledge, nonpatented solutions with delay tracking accuracy comparable with that of the current state-of-art trackers.

  1. Structural Analysis of Complex Networks

    CERN Document Server

    Dehmer, Matthias

    2011-01-01

    Filling a gap in literature, this self-contained book presents theoretical and application-oriented results that allow for a structural exploration of complex networks. The work focuses not only on classical graph-theoretic methods, but also demonstrates the usefulness of structural graph theory as a tool for solving interdisciplinary problems. Applications to biology, chemistry, linguistics, and data analysis are emphasized. The book is suitable for a broad, interdisciplinary readership of researchers, practitioners, and graduate students in discrete mathematics, statistics, computer science,

  2. Efficient Analysis of Complex Structures

    Science.gov (United States)

    Kapania, Rakesh K.

    2000-01-01

    Last various accomplishments achieved during this project are : (1) A Survey of Neural Network (NN) applications using MATLAB NN Toolbox on structural engineering especially on equivalent continuum models (Appendix A). (2) Application of NN and GAs to simulate and synthesize substructures: 1-D and 2-D beam problems (Appendix B). (3) Development of an equivalent plate-model analysis method (EPA) for static and vibration analysis of general trapezoidal built-up wing structures composed of skins, spars and ribs. Calculation of all sorts of test cases and comparison with measurements or FEA results. (Appendix C). (4) Basic work on using second order sensitivities on simulating wing modal response, discussion of sensitivity evaluation approaches, and some results (Appendix D). (5) Establishing a general methodology of simulating the modal responses by direct application of NN and by sensitivity techniques, in a design space composed of a number of design points. Comparison is made through examples using these two methods (Appendix E). (6) Establishing a general methodology of efficient analysis of complex wing structures by indirect application of NN: the NN-aided Equivalent Plate Analysis. Training of the Neural Networks for this purpose in several cases of design spaces, which can be applicable for actual design of complex wings (Appendix F).

  3. Failure mode and effect analysis-based quality assurance for dynamic MLC tracking systems

    Energy Technology Data Exchange (ETDEWEB)

    Sawant, Amit; Dieterich, Sonja; Svatos, Michelle; Keall, Paul [Stanford University, Stanford, California 94394 (United States); Varian Medical Systems, Palo Alto, California 94304 (United States); Stanford University, Stanford, California 94394 (United States)

    2010-12-15

    Purpose: To develop and implement a failure mode and effect analysis (FMEA)-based commissioning and quality assurance framework for dynamic multileaf collimator (DMLC) tumor tracking systems. Methods: A systematic failure mode and effect analysis was performed for a prototype real-time tumor tracking system that uses implanted electromagnetic transponders for tumor position monitoring and a DMLC for real-time beam adaptation. A detailed process tree of DMLC tracking delivery was created and potential tracking-specific failure modes were identified. For each failure mode, a risk probability number (RPN) was calculated from the product of the probability of occurrence, the severity of effect, and the detectibility of the failure. Based on the insights obtained from the FMEA, commissioning and QA procedures were developed to check (i) the accuracy of coordinate system transformation, (ii) system latency, (iii) spatial and dosimetric delivery accuracy, (iv) delivery efficiency, and (v) accuracy and consistency of system response to error conditions. The frequency of testing for each failure mode was determined from the RPN value. Results: Failures modes with RPN{>=}125 were recommended to be tested monthly. Failure modes with RPN<125 were assigned to be tested during comprehensive evaluations, e.g., during commissioning, annual quality assurance, and after major software/hardware upgrades. System latency was determined to be {approx}193 ms. The system showed consistent and accurate response to erroneous conditions. Tracking accuracy was within 3%-3 mm gamma (100% pass rate) for sinusoidal as well as a wide variety of patient-derived respiratory motions. The total time taken for monthly QA was {approx}35 min, while that taken for comprehensive testing was {approx}3.5 h. Conclusions: FMEA proved to be a powerful and flexible tool to develop and implement a quality management (QM) framework for DMLC tracking. The authors conclude that the use of FMEA-based QM ensures

  4. Failure mode and effect analysis-based quality assurance for dynamic MLC tracking systems.

    Science.gov (United States)

    Sawant, Amit; Dieterich, Sonja; Svatos, Michelle; Keall, Paul

    2010-12-01

    To develop and implement a failure mode and effect analysis (FMEA)-based commissioning and quality assurance framework for dynamic multileaf collimator (DMLC) tumor tracking systems. A systematic failure mode and effect analysis was performed for a prototype real-time tumor tracking system that uses implanted electromagnetic transponders for tumor position monitoring and a DMLC for real-time beam adaptation. A detailed process tree of DMLC tracking delivery was created and potential tracking-specific failure modes were identified. For each failure mode, a risk probability number (RPN) was calculated from the product of the probability of occurrence, the severity of effect, and the detectibility of the failure. Based on the insights obtained from the FMEA, commissioning and QA procedures were developed to check (i) the accuracy of coordinate system transformation, (ii) system latency, (iii) spatial and dosimetric delivery accuracy, (iv) delivery efficiency, and (v) accuracy and consistency of system response to error conditions. The frequency of testing for each failure mode was determined from the RPN value. Failures modes with RPN > or = 125 were recommended to be tested monthly. Failure modes with RPN < 125 were assigned to be tested during comprehensive evaluations, e.g., during commissioning, annual quality assurance, and after major software/hardware upgrades. System latency was determined to be approximately 193 ms. The system showed consistent and accurate response to erroneous conditions. Tracking accuracy was within 3%-3 mm gamma (100% pass rate) for sinusoidal as well as a wide variety of patient-derived respiratory motions. The total time taken for monthly QA was approximately 35 min, while that taken for comprehensive testing was approximately 3.5 h. FMEA proved to be a powerful and flexible tool to develop and implement a quality management (QM) framework for DMLC tracking. The authors conclude that the use of FMEA-based QM ensures efficient allocation

  5. Detailed analysis of latencies in image-based dynamic MLC tracking.

    Science.gov (United States)

    Poulsen, Per Rugaard; Cho, Byungchul; Sawant, Amit; Ruan, Dan; Keall, Paul J

    2010-09-01

    Previous measurements of the accuracy of image-based real-time dynamic multileaf collimator (DMLC) tracking show that the major contributor to errors is latency, i.e., the delay between target motion and MLC response. Therefore the purpose of this work was to develop a method for detailed analysis of latency contributions during image-based DMLC tracking. A prototype DMLC tracking system integrated with a linear accelerator was used for tracking a phantom with an embedded fiducial marker during treatment delivery. The phantom performed a sinusoidal motion. Real-time target localization was based on x-ray images acquired either with a portal imager or a kV imager mounted orthogonal to the treatment beam. Each image was stored in a file on the imaging workstation. A marker segmentation program opened the image file, determined the marker position in the image, and transferred it to the DMLC tracking program. This program estimated the three-dimensional target position by a single-imager method and adjusted the MLC aperture to the target position. Imaging intervals deltaT(image) from 150 to 1000 ms were investigated for both kV and MV imaging. After the experiments, the recorded images were synchronized with MLC log files generated by the MLC controller and tracking log files generated by the tracking program. This synchronization allowed temporal analysis of the information flow for each individual image from acquisition to completed MLC adjustment. The synchronization also allowed investigation of the MLC adjustment dynamics on a considerably finer time scale than the 50 ms time resolution of the MLC log files. For deltaT(image) = 150 ms, the total time from image acquisition to completed MLC adjustment was 380 +/- 9 ms for MV and 420 +/- 12 ms for kV images. The main part of this time was from image acquisition to completed image file writing (272 ms for MV and 309 ms for kV). Image file opening (38 ms), marker segmentation (4 ms), MLC position calculation (16 ms

  6. Performance Analysis of Maximum Power Point Tracking Algorithms Under Varying Irradiation

    Directory of Open Access Journals (Sweden)

    Bhukya Krishna Naick

    2017-03-01

    Full Text Available Photovoltaic (PV system is one of the reliable alternative sources of energy and its contribution in energy sector is growing rapidly. The performance of PV system depends upon the solar insolation, which will be varying throughout the day, season and year. The biggest challenge is to obtain the maximum power from PV array at varying insolation levels. The maximum power point tracking (MPPT controller, in association with tracking algorithm will act as a principal element in driving the PV system at maximum power point (MPP. In this paper, the simulation model has been developed and the results were compared for perturb and observe, incremental conductance, extremum seeking control and fuzzy logic controller based MPPT algorithms at different irradiation levels on a 10 KW PV array. The results obtained were analysed in terms of convergence rate and their efficiency to track the MPP. Keywords: Photovoltaic system, MPPT algorithms, perturb and observe, incremental conductance, scalar gradient extremum seeking control, fuzzy logic controller. Article History: Received 3rd Oct 2016; Received in revised form 6th January 2017; Accepted 10th February 2017; Available online How to Cite This Article: Naick, B. K., Chatterjee, T. K. & Chatterjee, K. (2017 Performance Analysis of Maximum Power Point Tracking Algorithms Under Varying Irradiation. Int Journal of Renewable Energy Development, 6(1, 65-74. http://dx.doi.org/10.14710/ijred.6.1.65-74

  7. A Resilient, Non-neuronal Source of the Spatiotemporal Lag Structure Detected by BOLD Signal-Based Blood Flow Tracking

    Directory of Open Access Journals (Sweden)

    Toshihiko Aso

    2017-05-01

    Full Text Available Recent evidence has suggested that blood oxygenation level-dependent (BOLD signals convey information about brain circulation via low frequency oscillation of systemic origin (sLFO that travels through the vascular structure (“lag mapping”. Prompted by its promising application in both physiology and pathology, we examined this signal component using multiple approaches. A total of 30 healthy volunteers were recruited to perform two reproducibility experiments at 3 Tesla using multiband echo planar imaging. The first experiment investigated the effect of denoising and the second was designed to study the effect of subject behavior on lag mapping. The lag map's intersession test-retest reproducibility and image contrast were both diminished by removal of either the neuronal or the non-neuronal (e.g., cardiac, respiratory components by independent component analysis-based denoising, suggesting that the neurovascular coupling also comprises a part of the BOLD lag structure. The lag maps were, at the same time, robust against local perfusion increases due to visuomotor task and global changes in perfusion induced by breath-holding at the same level as the intrasession reliability. The lag structure was preserved after time-locked averaging to the visuomotor task and breath-holding events, while any preceding signal changes were canceled out for the visuomotor task, consistent with the passive effect of neurovascular coupling in the venous side of the vasculature. These findings support the current assumption that lag mapping primarily reflects vascular structure despite the presence of sLFO perturbation of neuronal or non-neuronal origin and, thus, emphasize the vascular origin of the lag map, encouraging application of BOLD-based blood flow tracking.

  8. Neutron activation and track analysis of the newly found bones of the southern mammoths and dinosaurs

    International Nuclear Information System (INIS)

    Vasidov, A.; Osinskaya, N.S.; Saidullaev, B.J.; Akhmadshaev, A.

    2016-01-01

    The bones of southern mammoths and dinosaur had been discovered in the territory of Uzbekistan in 2005-2014. The main aim of the work was a study of profiles of radiogenic and some of elements in bones of mammoths and dinosaur, and the element comparisons with standard bones and its soils by instrumental neutron activation and track analysis. In bones of the mammoths and dinosaur were registered a high contents of uranium and rare earth elements by instrumental neutron activation analysis. The radon concentrations in samples were measured in isolated plastic chambers by solid state nuclear track detectors type of CR-39 within 35 days. The values of radon exhalation rates were determined very more in ancient bones than in standard bones and soils. (author)

  9. Using Order Tracking Analysis Method to Detect the Angle Faults of Blades on Wind Turbine

    DEFF Research Database (Denmark)

    Li, Pengfei; Hu, Weihao; Liu, Juncheng

    2016-01-01

    The angle faults of blades on wind turbines are usually included in the set angle fault and the pitch angle fault. They are occupied with a high proportion in all wind turbine faults. Compare with the traditional fault detection methods, using order tracking analysis method to detect angle faults...... has many advantages, such as easy implementation and high system reliability. Because of using Power Spectral Density method (PSD) or Fast Fourier Transform (FFT) method cannot get clear fault characteristic frequencies, this kind of faults should be detected by an effective method. This paper...... proposes a novel method of using order tracking analysis to analyze the signal of input aerodynamic torque which is received by hub. After the analyzed process, the fault characteristic frequency could be extracted by the analyzed signals and compared with the signals from normal operating conditions...

  10. Stereological analysis of spatial structures

    DEFF Research Database (Denmark)

    Hansen, Linda Vadgård

    The thesis deals with stereological analysis of spatial structures. One area of focus has been to improve the precision of well-known stereological estimators by including information that is available via automatic image analysis. Furthermore, the thesis presents a stochastic model for star......-shaped three-dimensional objects using the radial function. It appears that the model is highly fleksiblel in the sense that it can be used to describe an object with arbitrary irregular surface. Results on the distribution of well-known local stereological volume estimators are provided....

  11. Numerical Analysis on Color Preference and Visual Comfort from Eye Tracking Technique

    OpenAIRE

    Ho, Ming-Chung; Chen, Jhih-Ming; Huang, Ray-Ying; Shen, Ming-Hsun; Lu, Ming-Chi; Liu, Chia-Ju

    2015-01-01

    Color preferences in engineering are very important, and there exists relationship between color preference and visual comfort. In this study, there are thirty university students who participated in the experiment, supplemented by pre- and posttest questionnaires, which lasted about an hour. The main purpose of this study is to explore the visual effects of different color assignment with subjective color preferences via eye tracking technology. Eye-movement data through a nonlinear analysis...

  12. A fully automated optical microscope for analysis of particle tracks in solids

    CERN Document Server

    Dolleiser, M

    2002-01-01

    A fully automatic optical microscope (FAOM) for on-line analysis of micro-objects is described. The system has many capabilities, such as autofocusing, autocounting, autoscanning, producing optical images corresponding to different depths in the sample, contour and edge finding, etc. The autofocusing can be achieved with more than one method. The system can be used for analysis and counting (high- density) micro-objects, such as particle tracks in plastic detectors. The processing speed of the system is adequate and it can be used in analysis of macro samples. The software of the FAOM is written in C++ and runs under Microsoft Windows operating systems. (8 refs).

  13. The effect of track structure on the induction of chromosomal aberrations in murine cells

    Science.gov (United States)

    Durante, M.; Cella, L.; Furusawa, Y.; George, K.; Gialanella, G.; Grossi, G.; Pugliese, M.; Saito, M.; Yang, T. C.

    1998-01-01

    PURPOSE: To measure chromosome aberrations in C3H 10T1/2 mouse fibroblasts using FISH painting at the first mitosis following exposure to 30 keV/microm hydrogen or neon ions. MATERIALS AND METHODS: Cells in plateau-phase were irradiated with 0.86 MeV protons at the TTT-3 Tandem accelerator in Naples (Italy), or with 400 MeV/n Ne ions at the HIMAC accelerator in Chiba (Japan). Colcemid-blocked cells were harvested at the first mitosis following exposure, and chromosome spreads were hybridized in situ with a fluorescein-labelled composite mouse DNA probe specific for chromosomes 2 and 8. RESULTS: Protons were more efficient than neon ions at the same LET in the induction of chromosome interchanges and breaks. Yields of complex exchanges were similar for both particles at the same dose, but protons produced mostly insertions, while with Ne exposure non-reciprocal exchanges were the most frequent complex-type exchange. CONCLUSIONS: Charged particles with the same LET produce different yields of chromosome aberrations, and some observed differences can be explained based on the available track-structure models.

  14. Investigation of dynamic influence of rolling stock for the track structure

    Directory of Open Access Journals (Sweden)

    Nozhenko E.S.

    2016-08-01

    Full Text Available Are presented the results of experimental studies to evaluate the dynamic impact of rolling stock wheels with defects in the track structure. Was accomplished of evaluation the impact of movement speeds in the range of 10 to 40 km/h and loading of rolling stock on the edge stresses in the rails, and acceleration of the rail, were compared results of statistical processing of the measured data to determine the maximum permissible level of acceleration of the rails. Was analyzed the influence of defects of various sizes on the value of stresses in the rails and accelerations of rails. It revealed a monotonic increase of the maximum probability values of rail acceleration when passing a locomotive and wagon, regardless of how load the wagon, unlike the stresses in the edges of the rails, which do not depend on the speed in the test speed range. It was found that only in the value of the maximum possible value of the rail edge stresses for the empty wagon can not be detected the defects of wheel with using only the statistical methods, in the same time is presented the anomaly in the values of acceleration of the rail in the records of the empty wagon.

  15. Tracking of Nuclear Cable Insulation Polymer Structural Changes using the Gel Fraction and Uptake Factor Method

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Miguel; Huang, Qian; Fifield, Leonard S.

    2018-04-11

    Cross-linked polyethylene (XLPE) cable insulation samples were exposed to heat and gamma radiation at a series of temperatures, dose rates, and exposure times to evaluate the effects of these variables on material degradation. The samples were tested using the solvent incubation method to collect gel fraction and uptake factor data in order to assess the crosslinking and chain scission occurring in polymer samples with aging. Consistent with previous reports, gel fraction values were observed to increase and uptake factor values to decrease with radiation and thermal exposure. The trends seen were also more prominent as exposure time increased, suggesting this to be a viable method of tracking structural changes in the XLPE-insulated cable material over extended periods. For the conditions explored, the cable insulation material evaluated did not indicate signs of anomalous aging such as inverse temperature effect in which radiation-induced aging is more severe at lower temperature. Ongoing aging under identical radiation conditions and at lower temperature will further inform conclusions regarding the importance of inverse temperature effects for this material under these conditions.

  16. Thyroid cell irradiation by radioiodines: a new Monte Carlo electron track-structure code

    International Nuclear Information System (INIS)

    Champion, Christophe; Elbast, Mouhamad; Colas-Linhart, Nicole; Ting-Di Wu

    2007-01-01

    The most significant impact of the Chernobyl accident is the increased incidence of thyroid cancer among children who were exposed to short-lived radioiodines and 131-iodine. In order to accurately estimate the radiation dose provided by these radioiodines, it is necessary to know where iodine is incorporated. To do that, the distribution at the cellular level of newly organified iodine in the immature rat thyroid was performed using secondary ion mass microscopy (NanoSIMS 50 ). Actual dosimetric models take only into account the averaged energy and range of beta particles of the radio-elements and may, therefore, imperfectly describe the real distribution of dose deposit at the microscopic level around the point sources. Our approach is radically different since based on a track-structure Monte Carlo code allowing following-up of electrons down to low energies (∼= 10 eV) what permits a nanometric description of the irradiation physics. The numerical simulations were then performed by modelling the complete disintegrations of the short-lived iodine isotopes as well as of 131 I in new born rat thyroids in order to take into account accurate histological and biological data for the thyroid gland. (author)

  17. Operationalizing Civilian Protection in Mali: The Case for a Civilian Casualty Tracking, Analysis, and Response Cell

    Directory of Open Access Journals (Sweden)

    Marla B. Keenan

    2013-06-01

    Full Text Available This practice note details an emerging best practice of civilian harm mitigation in armed conflict: namely, the creation of civilian casualty tracking, analysis and response processes by a warring party or peace operation force. It asserts that in Iraq, Afghanistan and soon Somalia, these processes to better understand civilian harm and address consequences have positively shaped mission tactics, training, and overall operations. In both Iraq and Afghanistan, tracking and analysis has lead to a marked decrease in civilian casualties and facilitated the making of amends for any civilian losses. The paper argues that for warring parties to achieve their mission—particularly one with a protection of civilians mandate as with the United Nations Multidimensional Integrated Stabilization Mission in Mali (MINUSMA—they must fully understand the impact of their actions on the civilian population, positive or negative. For this reason, a Civilian Casualty Tracking, Analysis, and Response Cell should be created for MINUSMA to improve its ability mitigate risk to civilians as required by its Security Council mandate.

  18. Enhanced Optical Head Tracking for Cranial Radiation Therapy: Supporting Surface Registration by Cutaneous Structures

    Energy Technology Data Exchange (ETDEWEB)

    Wissel, Tobias, E-mail: wissel@rob.uni-luebeck.de [Institute for Robotics and Cognitive Systems, University of Lübeck, Lübeck (Germany); Graduate School for Computing in Medicine and Life Science, University of Lübeck, Lübeck (Germany); Stüber, Patrick; Wagner, Benjamin [Institute for Robotics and Cognitive Systems, University of Lübeck, Lübeck (Germany); Graduate School for Computing in Medicine and Life Science, University of Lübeck, Lübeck (Germany); Bruder, Ralf [Institute for Robotics and Cognitive Systems, University of Lübeck, Lübeck (Germany); Erdmann, Christian [Institute for Neuroradiology, Universitätsklinikum Schleswig-Hostein, Campus Lübeck, Lübeck (Germany); Deutz, Christin-Sophie [Clinic for Oral and Maxillo-Facial Surgery, Universitätsklinikum Schleswig-Hostein, Campus Lübeck, Lübeck (Germany); Sack, Benjamin [Department of Neurology, Universitätsklinikum Schleswig-Hostein, Campus Lübeck, Lübeck (Germany); Manit, Jirapong [Institute for Robotics and Cognitive Systems, University of Lübeck, Lübeck (Germany); Graduate School for Computing in Medicine and Life Science, University of Lübeck, Lübeck (Germany); and others

    2016-06-01

    Purpose: To support surface registration in cranial radiation therapy by structural information. The risk for spatial ambiguities is minimized by using tissue thickness variations predicted from backscattered near-infrared (NIR) light from the forehead. Methods and Materials: In a pilot study we recorded NIR surface scans by laser triangulation from 30 volunteers of different skin type. A ground truth for the soft-tissue thickness was segmented from MR scans. After initially matching the NIR scans to the MR reference, Gaussian processes were trained to predict tissue thicknesses from NIR backscatter. Moreover, motion starting from this initial registration was simulated by 5000 random transformations of the NIR scan away from the MR reference. Re-registration to the MR scan was compared with and without tissue thickness support. Results: By adding prior knowledge to the backscatter features, such as incident angle and neighborhood information in the scanning grid, we showed that tissue thickness can be predicted with mean errors of <0.2 mm, irrespective of the skin type. With this additional information, the average registration error improved from 3.4 mm to 0.48 mm by a factor of 7. Misalignments of more than 1 mm were almost thoroughly (98.9%) pushed below 1 mm. Conclusions: For almost all cases tissue-enhanced matching achieved better results than purely spatial registration. Ambiguities can be minimized if the cutaneous structures do not agree. This valuable support for surface registration increases tracking robustness and avoids misalignment of tumor targets far from the registration site.

  19. Enhanced Optical Head Tracking for Cranial Radiation Therapy: Supporting Surface Registration by Cutaneous Structures

    International Nuclear Information System (INIS)

    Wissel, Tobias; Stüber, Patrick; Wagner, Benjamin; Bruder, Ralf; Erdmann, Christian; Deutz, Christin-Sophie; Sack, Benjamin; Manit, Jirapong

    2016-01-01

    Purpose: To support surface registration in cranial radiation therapy by structural information. The risk for spatial ambiguities is minimized by using tissue thickness variations predicted from backscattered near-infrared (NIR) light from the forehead. Methods and Materials: In a pilot study we recorded NIR surface scans by laser triangulation from 30 volunteers of different skin type. A ground truth for the soft-tissue thickness was segmented from MR scans. After initially matching the NIR scans to the MR reference, Gaussian processes were trained to predict tissue thicknesses from NIR backscatter. Moreover, motion starting from this initial registration was simulated by 5000 random transformations of the NIR scan away from the MR reference. Re-registration to the MR scan was compared with and without tissue thickness support. Results: By adding prior knowledge to the backscatter features, such as incident angle and neighborhood information in the scanning grid, we showed that tissue thickness can be predicted with mean errors of <0.2 mm, irrespective of the skin type. With this additional information, the average registration error improved from 3.4 mm to 0.48 mm by a factor of 7. Misalignments of more than 1 mm were almost thoroughly (98.9%) pushed below 1 mm. Conclusions: For almost all cases tissue-enhanced matching achieved better results than purely spatial registration. Ambiguities can be minimized if the cutaneous structures do not agree. This valuable support for surface registration increases tracking robustness and avoids misalignment of tumor targets far from the registration site.

  20. Counting radon tracks in Makrofol detectors with the 'image reduction and analysis facility' (IRAF) software package

    International Nuclear Information System (INIS)

    Hernandez, F.; Gonzalez-Manrique, S.; Karlsson, L.; Hernandez-Armas, J.; Aparicio, A.

    2007-01-01

    Makrofol detectors are commonly used for long-term radon ( 222 Rn) measurements in houses, schools and workplaces. The use of this type of passive detectors for the determination of radon concentrations requires the counting of the nuclear tracks produced by alpha particles on the detecting material. The 'image reduction and analysis facility' (IRAF) software package is a piece of software commonly used in astronomical applications. It allows detailed counting and mapping of sky sections where stars are grouped very closely, even forming clusters. In order to count the nuclear tracks in our Makrofol radon detectors, we have developed an inter-disciplinary application that takes advantage of the similitude that exist between counting stars in a dark sky and tracks in a track-etch detector. Thus, a low cost semi-automatic system has been set up in our laboratory which utilises a commercially available desktop scanner and the IRAF software package. A detailed description of the proposed semi-automatic method and its performance, in comparison to ocular counting, is described in detail here. In addition, the calibration factor for this procedure, 2.97+/-0.07kBqm -3 htrack -1 cm 2 , has been calculated based on the results obtained from exposing 46 detectors to certified radon concentrations. Furthermore, the results of a preliminary radon survey carried out in 62 schools in Tenerife island (Spain), using Makrofol detectors, counted with the mentioned procedure, are briefly presented. The results reported here indicate that the developed procedure permits a fast, accurate and unbiased determination of the radon tracks in a large number of detectors. The measurements carried out in the schools showed that the radon concentrations in at least 12 schools were above 200Bqm -3 and, in two of them, above 400Bqm -3 . Further studies should be performed at those schools following the European Union recommendations about radon concentrations in buildings

  1. Effective star tracking method based on optical flow analysis for star trackers.

    Science.gov (United States)

    Sun, Ting; Xing, Fei; Wang, Xiaochu; Li, Jin; Wei, Minsong; You, Zheng

    2016-12-20

    Benefiting from rapid development of imaging sensor technology, modern optical technology, and a high-speed computing chip, the star tracker's accuracy, dynamic performance, and update rate have been greatly improved with low power consumption and miniature size. The star tracker is currently one of the most competitive attitude measurement sensors. However, due to restrictions of the optical imaging system, difficulties still exist in moving star spot detection and star tracking when in special motion conditions. An effective star tracking method based on optical flow analysis for star trackers is proposed in this paper. Spot-based optical flow, based on a gray gradient between two adjacent star images, is analyzed to distinguish the star spot region and obtain an accurate star spot position so that the star tracking can keep continuous under high dynamic conditions. The obtained star vectors and extended Kalman filter (EKF) are then combined to conduct an angular velocity estimation to ensure region prediction of the star spot; this can be combined with the optical flow analysis result. Experiment results show that the method proposed in this paper has advantages in conditions of large angular velocity and large angular acceleration, despite the presence of noise. Higher functional density and better performance can be achieved; thus, the star tracker can be more widely applied in small satellites, remote sensing, and other complex space missions.

  2. Comparative analysis of fixed and sun tracking low power PV systems considering energy consumption

    International Nuclear Information System (INIS)

    Lazaroiu, George Cristian; Longo, Michela; Roscia, Mariacristina; Pagano, Mario

    2015-01-01

    Highlights: • Photovoltaic system prototype with sun tracking. • Energy analysis of fixed and sun tracking built prototypes. • Experimental tests in different environmental conditions. • Theoretical and experimental validation of the prototype. - Abstract: Photovoltaic technology allows to directly convert solar energy into electrical energy with clear advantages: no environmental impact during operation, reliability and durability of the systems, reduced operating costs and maintenance, ability to both supply remote customers and simply connect to the electrical network. This paper evaluates the performance of two photovoltaic systems: one fixed and one equipped with a sun tracker. The objective of this research is to analyze the increase of daily produced energy by using the sun tracking system. The analysis accounts also the energy consumption of the sun tracker. An analytical approach is proposed. To validate the results through experimental tests, two alternative low power PV systems were built. Each system consists of a PV source, a MPPT (Maximum Power Point Tracker) power converter and a 12 V–40 A h electrochemical battery, which is used as electric load. The sun tracker system evidenced an important growth of power production during morning and evening

  3. Nondestructive 3D confocal laser imaging with deconvolution of seven whole stardust tracks with complementary XRF and quantitative analysis

    International Nuclear Information System (INIS)

    Greenberg, M.; Ebel, D.S.

    2009-01-01

    We present a nondestructive 3D system for analysis of whole Stardust tracks, using a combination of Laser Confocal Scanning Microscopy and synchrotron XRF. 3D deconvolution is used for optical corrections, and results of quantitative analyses of several tracks are presented. The Stardust mission to comet Wild 2 trapped many cometary and ISM particles in aerogel, leaving behind 'tracks' of melted silica aerogel on both sides of the collector. Collected particles and their tracks range in size from submicron to millimeter scale. Interstellar dust collected on the obverse of the aerogel collector is thought to have an average track length of ∼15 (micro)m. It has been our goal to perform a total non-destructive 3D textural and XRF chemical analysis on both types of tracks. To that end, we use a combination of Laser Confocal Scanning Microscopy (LCSM) and X Ray Florescence (XRF) spectrometry. Utilized properly, the combination of 3D optical data and chemical data provides total nondestructive characterization of full tracks, prior to flattening or other destructive analysis methods. Our LCSM techniques allow imaging at 0.075 (micro)m/pixel, without the use of oil-based lenses. A full textural analysis on track No.82 is presented here as well as analysis of 6 additional tracks contained within 3 keystones (No.128, No.129 and No.140). We present a method of removing the axial distortion inherent in LCSM images, by means of a computational 3D Deconvolution algorithm, and present some preliminary experiments with computed point spread functions. The combination of 3D LCSM data and XRF data provides invaluable information, while preserving the integrity of the samples for further analysis. It is imperative that these samples, the first extraterrestrial solids returned since the Apollo era, be fully mapped nondestructively in 3D, to preserve the maximum amount of information prior to other, destructive analysis.

  4. Pulse shape analysis for γ-ray tracking. Part I: Pulse shape simulation with JASS

    International Nuclear Information System (INIS)

    Schlarb, M.; Gernhaeuser, R.; Klupp, S.; Kruecken, R.

    2011-01-01

    Next-generation γ -ray spectrometers based on highly segmented HPGe detectors are using the recent technique of γ -ray tracking to significantly improve on efficiency and Doppler correction capabilities. A precise reconstruction of the individual interaction locations within the active material is possible through the use of pulse shape analysis (PSA) which, in turn, demands an accurate knowledge of the detector response. We developed JASS, a Java-based simulation software package to generate pulse shapes for the AGATA detectors from physics constraints and basic material parameters. For verifying the simulation experimental data from a coincidence scan with known interaction locations was used. The achieved position resolution, in the order of a few millimeters, is within the requirements of the γ -ray tracking array. (orig.)

  5. Performance Analysis of a Maximum Power Point Tracking Technique using Silver Mean Method

    Directory of Open Access Journals (Sweden)

    Shobha Rani Depuru

    2018-01-01

    Full Text Available The proposed paper presents a simple and particularly efficacious Maximum Power Point Tracking (MPPT algorithm based on Silver Mean Method (SMM. This method operates by choosing a search interval from the P-V characteristics of the given solar array and converges to MPP of the Solar Photo-Voltaic (SPV system by shrinking its interval. After achieving the maximum power, the algorithm stops shrinking and maintains constant voltage until the next interval is decided. The tracking capability efficiency and performance analysis of the proposed algorithm are validated by the simulation and experimental results with a 100W solar panel for variable temperature and irradiance conditions. The results obtained confirm that even without any perturbation and observation process, the proposed method still outperforms the traditional perturb and observe (P&O method by demonstrating far better steady state output, more accuracy and higher efficiency.

  6. Structural Analysis of Fungal Cerebrosides

    Directory of Open Access Journals (Sweden)

    Eliana eBarreto-Bergter

    2011-12-01

    Full Text Available Of the ceramide monohexosides (CMHs, gluco- and galactosylceramides are the main neutral glycosphingolipids expressed in fungal cells. Their structural determination is greatly dependent on the use of mass spectrometric techniques, including fast atom bombardment-mass spectrometry (FAB-MS, electrospray ionization (ESI-MS, and energy collision-induced dissociation mass spectrometry (ESI-MS/CID-MS. Nuclear magnetic resonance (NMR has also been used successfully. Such a combination of techniques, combined with classical analytical separation, such as HPTLC and column chromatography, has led to the structural elucidation of a great number of fungal CMHs. The structure of fungal CMH is conserved among fungal species and consists of a glucose or galactose residue attached to a ceramide moiety containing 9-methyl-4,8-sphingadienine with an amidic linkage to hydroxylated fatty acids, most commonly having 16 or 18 carbon atoms and unsaturation between C-3 and C-4. Along with their unique structural characteristics, fungal CMHs have a peculiar subcellular distribution and striking biological properties. Fungal cerebrosides were also characterized as antigenic molecules directly or indirectly involved in cell growth or differentiation in Schizophyllum commune, Cryptococcus neoformans, Pseudallescheria boydii, Candida albicans, Aspergillus nidulans, A.fumigatus and Colletotrichum gloeosporioides. Besides classical techniques for cerebroside (CMH analysis, we now describe new approaches, combining conventional TLC and mass spectrometry, as well as emerging technologies for subcellular localization and distribution of glycosphingolipids by SIMS and imaging MALDI TOF .

  7. Quantification of global myocardial function by cine MRI deformable registration-based analysis: Comparison with MR feature tracking and speckle-tracking echocardiography.

    Science.gov (United States)

    Lamacie, Mariana M; Thavendiranathan, Paaladinesh; Hanneman, Kate; Greiser, Andreas; Jolly, Marie-Pierre; Ward, Richard; Wintersperger, Bernd J

    2017-04-01

    To evaluate deformable registration algorithms (DRA)-based quantification of cine steady-state free-precession (SSFP) for myocardial strain assessment in comparison with feature-tracking (FT) and speckle-tracking echocardiography (STE). Data sets of 28 patients/10 volunteers, undergoing same-day 1.5T cardiac MRI and echocardiography were included. LV global longitudinal (GLS), circumferential (GCS) and radial (GRS) peak systolic strain were assessed on cine SSFP data using commercially available FT algorithms and prototype DRA-based algorithms. STE was applied as standard of reference for accuracy, precision and intra-/interobserver reproducibility testing. DRA showed narrower limits of agreement compared to STE for GLS (-4.0 [-0.9,-7.9]) and GCS (-5.1 [1.1,-11.2]) than FT (3.2 [11.2,-4.9]; 3.8 [13.9,-6.3], respectively). While both DRA and FT demonstrated significant differences to STE for GLS and GCS (all pcine MRI. • Inverse DRA demonstrated superior reproducibility compared to feature-tracking (FT) methods. • Cine MR DRA and FT analysis demonstrate differences to speckle-tracking echocardiography • DRA demonstrated better correlation with STE than FT for MR-derived global strain data.

  8. Improving accuracy of overhanging structures for selective laser melting through reliability characterization of single track formation on thick powder beds

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2016-01-01

    Repeatability and reproducibility of parts produced by selective laser melting is a standing issue, and coupled with a lack of standardized quality control presents a major hindrance towards maturing of selective laser melting as an industrial scale process. Consequently, numerical process...... modelling has been adopted towards improving the predictability of the outputs from the selective laser melting process. Establishing the reliability of the process, however, is still a challenge, especially in components having overhanging structures.In this paper, a systematic approach towards...... establishing reliability of overhanging structure production by selective laser melting has been adopted. A calibrated, fast, multiscale thermal model is used to simulate the single track formation on a thick powder bed. Single tracks are manufactured on a thick powder bed using same processing parameters...

  9. Dynamic analysis of embedded structures

    International Nuclear Information System (INIS)

    Kausel, E.; Whitman, R.V.; Morray, J.P.

    1977-01-01

    The paper presents simplified rules to account for embeddment and soil layering in the soil-structure interaction problem, to be used in dynamic analysis. The relationship between the spring method, and a direct solution (in which both soil and structure are modeled with finite elements and linear members) is first presented. It is shown that for consistency of the results with the two solution methods the spring method should be performed in the following three steps: 1. Determination of the motion of the massless foundation (having the same shape as the actual one) when subjected to the same input motion as the direct solution. 2. Determination of the frequency dependent subgrade stiffness for the relevant degrees of freedom. 3. Computations of the response of the real structure supported on frequency dependent soil springs and subjected at the base of these springs to the motion computed in step 1. The first two steps require, in general, finite element methods, which would make the procedure not attractive. It is shown in the paper, however, that excellent approximations can be obtained, on the basis of 1-dimensional wave propagation theory for the solution of step 1, and correction factors modifying for embeddment the corresponding springs of a surface footing on a layered stratum, for the solution of step 2. (Auth.)

  10. FIMTrack: An open source tracking and locomotion analysis software for small animals.

    Science.gov (United States)

    Risse, Benjamin; Berh, Dimitri; Otto, Nils; Klämbt, Christian; Jiang, Xiaoyi

    2017-05-01

    Imaging and analyzing the locomotion behavior of small animals such as Drosophila larvae or C. elegans worms has become an integral subject of biological research. In the past we have introduced FIM, a novel imaging system feasible to extract high contrast images. This system in combination with the associated tracking software FIMTrack is already used by many groups all over the world. However, so far there has not been an in-depth discussion of the technical aspects. Here we elaborate on the implementation details of FIMTrack and give an in-depth explanation of the used algorithms. Among others, the software offers several tracking strategies to cover a wide range of different model organisms, locomotion types, and camera properties. Furthermore, the software facilitates stimuli-based analysis in combination with built-in manual tracking and correction functionalities. All features are integrated in an easy-to-use graphical user interface. To demonstrate the potential of FIMTrack we provide an evaluation of its accuracy using manually labeled data. The source code is available under the GNU GPLv3 at https://github.com/i-git/FIMTrack and pre-compiled binaries for Windows and Mac are available at http://fim.uni-muenster.de.

  11. AR.Drone: security threat analysis and exemplary attack to track persons

    Science.gov (United States)

    Samland, Fred; Fruth, Jana; Hildebrandt, Mario; Hoppe, Tobias; Dittmann, Jana

    2012-01-01

    In this article we illustrate an approach of a security threat analysis of the quadrocopter AR.Drone, a toy for augmented reality (AR) games. The technical properties of the drone can be misused for attacks, which may relate security and/or privacy aspects. Our aim is to sensitize for the possibility of misuses and the motivation for an implementation of improved security mechanisms of the quadrocopter. We focus primarily on obvious security vulnerabilities (e.g. communication over unencrypted WLAN, usage of UDP, live video streaming via unencrypted WLAN to the control device) of this quadrocopter. We could practically verify in three exemplary scenarios that this can be misused by unauthorized persons for several attacks: high-jacking of the drone, eavesdropping of the AR.Drones unprotected video streams, and the tracking of persons. Amongst other aspects, our current research focuses on the realization of the attack of tracking persons and objects with the drone. Besides the realization of attacks, we want to evaluate the potential of this particular drone for a "safe-landing" function, as well as potential security enhancements. Additionally, in future we plan to investigate an automatic tracking of persons or objects without the need of human interactions.

  12. Performance and Integrity Analysis of the Vector Tracking Architecture of GNSS Receivers

    Science.gov (United States)

    Bhattacharyya, Susmita

    Frequent loss or attenuation of signals in urban areas and integrity (or reliability of system performance) are two principal challenges facing the Global Navigation Satellite Systems or GNSS today. They are of critical importance especially to safety or liability-critical applications where system malfunction can cause safety problems or has legal/economic consequences. To deal with the problem of integrity, algorithms called integrity monitors have been developed and fielded. These monitors are designed to raise an alarm when situations resulting in misleading information are identified. However, they do not enhance the ability of a GNSS receiver to track weak signals. Among several approaches proposed to deal with the problem of frequent signal outage, an advanced GNSS receiver architecture called vector tracking loops has attracted much attention in recent years. While there is an extensive body of knowledge that documents vector tracking's superiority to deal with weak signals, prior work on vector loop integrity monitoring is scant. Systematic designs of a vector loop-integrity monitoring scheme can find use in above-mentioned applications that are inherently vulnerable to frequent signal loss or attenuation. Developing such a system, however, warrants a thorough understanding of the workings of the vector architecture as the open literature provides very few preliminary studies in this regard. To this end, the first aspect of this research thoroughly explains the internal operations of the vector architecture. It recasts the existing complex vector architecture equations into parametric models that are mathematically tractable. An in-depth theoretical analysis of these models reveals that inter-satellite aiding is the key to vector tracking's superiority. The second aspect of this research performs integrity studies of the vector loops. Simulation results from the previous analysis show that inter-satellite aiding allows easy propagation of errors (and

  13. Soil Retaining Structures : Development of models for structural analysis

    NARCIS (Netherlands)

    Bakker, K.J.

    2000-01-01

    The topic of this thesis is the development of models for the structural analysis of soil retaining structures. The soil retaining structures being looked at are; block revetments, flexible retaining walls and bored tunnels in soft soil. Within this context typical structural behavior of these

  14. Sensitivity Analysis of Viscoelastic Structures

    Directory of Open Access Journals (Sweden)

    A.M.G. de Lima

    2006-01-01

    Full Text Available In the context of control of sound and vibration of mechanical systems, the use of viscoelastic materials has been regarded as a convenient strategy in many types of industrial applications. Numerical models based on finite element discretization have been frequently used in the analysis and design of complex structural systems incorporating viscoelastic materials. Such models must account for the typical dependence of the viscoelastic characteristics on operational and environmental parameters, such as frequency and temperature. In many applications, including optimal design and model updating, sensitivity analysis based on numerical models is a very usefull tool. In this paper, the formulation of first-order sensitivity analysis of complex frequency response functions is developed for plates treated with passive constraining damping layers, considering geometrical characteristics, such as the thicknesses of the multi-layer components, as design variables. Also, the sensitivity of the frequency response functions with respect to temperature is introduced. As an example, response derivatives are calculated for a three-layer sandwich plate and the results obtained are compared with first-order finite-difference approximations.

  15. Large coil test structural analysis

    International Nuclear Information System (INIS)

    Clinard, J.A.; Hammonds, C.J.

    1986-01-01

    The International Fusion Superconducting Magnet Test Facility (IFSMTF) at Oak Ridge National Laboratory (ORNL) is being utilized for testing of 2.5 x 3.5-m bore superconducting 8-T magnets produced by four international agencies (U.S., Euratom, Japan, and Switzerland). The definitive tests in the design configuration, six coils arranged in a compact torus, will begin in late 1985. Partial-array tests involving one US coil and the Japanese coil were completed in the fall of 1984. This presentation describes structural analysis using NASTRAN, with symmetry and superelement techniques, to predict the IFSMTF test stand and coil responses to various combinations of in-plane and out-of-plane loading conditions for both the partial-array and six-coil test configurations. Comparison to partial-array displacement and strain measurements are presented and discussed. Six-coil results and their utilization for determining safe levels of operation of the system are likewise discussed

  16. Robustness Analysis of Kinetic Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2009-01-01

    The present paper considers robustness of kinetic structures. Robustness of structures has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. Especially for these types of structural syst...... systems, it is of interest to investigate how robust the structures are, or what happens if a structural element is added to or removed from the original structure. The present paper discusses this issue for kinetic structures in architecture.......The present paper considers robustness of kinetic structures. Robustness of structures has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. Especially for these types of structural...

  17. Interlaboratory comparison of size measurements on nanoparticles using nanoparticle tracking analysis (NTA).

    Science.gov (United States)

    Hole, Patrick; Sillence, Katherine; Hannell, Claire; Maguire, Ciaran Manus; Roesslein, Matthias; Suarez, Guillaume; Capracotta, Sonja; Magdolenova, Zuzana; Horev-Azaria, Limor; Dybowska, Agnieszka; Cooke, Laura; Haase, Andrea; Contal, Servane; Manø, Stein; Vennemann, Antje; Sauvain, Jeans-Jacques; Staunton, Kieran Crosbie; Anguissola, Sergio; Luch, Andreas; Dusinska, Maria; Korenstein, Rafi; Gutleb, Arno C; Wiemann, Martin; Prina-Mello, Adriele; Riediker, Michael; Wick, Peter

    2013-01-01

    One of the key challenges in the field of nanoparticle (NP) analysis is in producing reliable and reproducible characterisation data for nanomaterials. This study looks at the reproducibility using a relatively new, but rapidly adopted, technique, Nanoparticle Tracking Analysis (NTA) on a range of particle sizes and materials in several different media. It describes the protocol development and presents both the data and analysis of results obtained from 12 laboratories, mostly based in Europe, who are primarily QualityNano members. QualityNano is an EU FP7 funded Research Infrastructure that integrates 28 European analytical and experimental facilities in nanotechnology, medicine and natural sciences with the goal of developing and implementing best practice and quality in all aspects of nanosafety assessment. This study looks at both the development of the protocol and how this leads to highly reproducible results amongst participants. In this study, the parameter being measured is the modal particle size.

  18. Effects of track structure and cell inactivation on the calculation of heavy ion mutation rates in mammalian cells

    Science.gov (United States)

    Cucinotta, F. A.; Wilson, J. W.; Shavers, M. R.; Katz, R.

    1996-01-01

    It has long been suggested that inactivation severely effects the probability of mutation by heavy ions in mammalian cells. Heavy ions have observed cross sections of inactivation that approach and sometimes exceed the geometric size of the cell nucleus in mammalian cells. In the track structure model of Katz the inactivation cross section is found by summing an inactivation probability over all impact parameters from the ion to the sensitive sites within the cell nucleus. The inactivation probability is evaluated using the dose-response of the system to gamma-rays and the radial dose of the ions and may be equal to unity at small impact parameters for some ions. We show how the effects of inactivation may be taken into account in the evaluation of the mutation cross sections from heavy ions in the track structure model through correlation of sites for gene mutation and cell inactivation. The model is fit to available data for HPRT mutations in Chinese hamster cells and good agreement is found. The resulting calculations qualitatively show that mutation cross sections for heavy ions display minima at velocities where inactivation cross sections display maxima. Also, calculations show the high probability of mutation by relativistic heavy ions due to the radial extension of ions track from delta-rays in agreement with the microlesion concept. The effects of inactivation on mutations rates make it very unlikely that a single parameter such as LET or Z*2/beta(2) can be used to specify radiation quality for heavy ion bombardment.

  19. Apatite fission-track analysis of the tectonic effects of the Arabia-Eurasia collision

    Science.gov (United States)

    Albino, I.; Cavazza, W.; Zattin, M.; Okay, A. I.; Adamia, S.; Sadradze, N.

    2012-04-01

    The Oligo-Miocene collision between Arabia and Eurasia led to the development of (i) the Bitlis-Zagros orogenic belt, (ii) the North and East Anatolian fault systems, (iii) the structural inversion of the Caucasian basins, and (iv) widespread deformation in the Turkish-Armenian-Iranian plateau. Despite the importance of the event, the exact age of the collision is poorly constrained. The integration of new apatite fission-track (AFT) data from the eastern Pontides, the Lesser Caucasus (Adjara-Trialeti zone), and the eastern part of the Anatolian plateau with preexisting data from the Bitlis suture has provided insights on the syn-and post-collisional evolution not only of eastern Anatolia but also of the entire Eastern Mediterranean area. The AFT samples have a wide spatial distribution and include different types of rocks: Paleogene sandstones and magmatic rocks with Cretaceous-to-Eocene intrusion ages. Despite the disparate lithologies and large distance, apatite fission-track ages from the easternmost Pontides, the Georgian Lesser Caucasus, the eastern Anatolian Plateau, and the Bitlis collision zone show a distinct geographic pattern. Exhumation along the Black Sea coast occurred in the Middle Miocene, mirroring the age of collision between the Eurasian and Arabian plates along the 2,400-km long Bitlis-Zagros suture zone some 200 km to the south. Exhumation in the Anatolian Plateau occurred in the Paleogene (with a cluster of ages in the Middle-Late Eocene), coevally with the development of the Izmir-Ankara-Erzincan suture. Successive development of the Anatolian Plateau did not exhume a new partial annealing zone and thus is not recorded by the apatite fission tracks.

  20. [Tracking analysis of three extraction processes of Arenaria Polytrichoides by Fourier transform infrared spectrocopy].

    Science.gov (United States)

    Ma, Jing; Wu, Xian-Xue; Tai, Xi; Xu, Liu-Xian; Zhu, Jin-Lan; Qin, Yao; Zhou, Qun; Sun, Su-Qin

    2014-10-01

    In order to develop a process analysis method to guide extraction process of Arenaria polytrichoides (AP) based on tracking analysis by Fourier transform infrared (FTIR), IR spectra of petroleum ether extracts (PE-E), ethyl acetate extracts (EtOAc-E), n-butanol extracts (n-BuOH-E) and water extracts (H2O-E) of AP from three extraction methods were recorded. The FTIR and corresponding second derivative infrared (SDIR) spectra were analyzed comparatively from two aspects, namely, different extracts from a same extraction process and the same extracts from different methods. The spectral analysis results show that different extracts obtained from a same extraction process have distinctly different spectral absorbance character. Although the IR spectral absorption characteristics of the same extracts from different methods are rather similar in holistic, some explicit spectral differences still could be found among each other. In extraction process one (M1), main flavonoids and their glycosides of AP migrated to EtOAc-E and the rest part of them shift to n-BuOH-E according to FTIR peaks such as 1,603 and 1,123 cm(-1). However, the circumstances in method two (M2) and method three (M3) were just the reverse. Moreover, a few flavonoid glycosides got into H2O-E. The relative content of all kinds of aglycones and higher saturated alkyl are much higher in EtOAc-E of M2 than that of M1 and M3 according to the relative absorption intensive of peak at 2,850 cm(-1). Similarly, n-BuOH-E of M3 has relative rich contents of glycosides: and polysaccharides than those of M1 and M2 by peaks, such as 1,066 and 2,927 cm(-1). These results demonstrate that the migration rules of AP components are not always same in different extrac- tion process. The substance migration information during the extraction process could be recorded and disclosed in an intuitive way by FTIR tracking analysis of corresponding extracts. Consequently, FTIR tracking analysis is a fast, efficient, low-carbon and

  1. Alpha particle and proton relative thermoluminescence efficiencies in LiF:Mg, Cu, P:is track structure theory up to the task?

    International Nuclear Information System (INIS)

    Horowitz, Y. S.; Siboni, D.; Oster, L.; Livingstone, J.; Guatelli, S.; Rosenfeld, A.; Emfietzoglou, D.; Bilski, P.; Obryk, B.

    2008-01-01

    Low-energy alpha particle and proton heavy charged particle (HCP) relative thermoluminescence (TL) efficiencies are calculated for the major dosimetric glow peak in LiF:Mg, Cu, P (MCP-N) in the framework of track structure theory (TST). The calculations employ previously published TRIPOS-E Monte Carlo track segment values of the radial dose in condensed phase LiF calculated at the Instituto National de Investigaciones Nucleares (Mexico) and experimentally measured normalised 60 Co gamma-induced TL dose-response functions, f(D), carried out at the Inst. of Nuclear Physics (Poland). The motivation for the calculations is to test the validity of TST in a TL system in which f(D) is not supra-linear (f(D) >1) and is not significantly dependent on photon energy contrary to the behaviour of the dose-response of composite peak 5 in the glow curve of LiF:Mg, Ti (TLD-100). The calculated HCP relative efficiencies in LiF:MCP-N are 23-87 % lower than the experimentally measured values, indicating a weakness in the major premise of TST which exclusively relates HCP effects to the radiation action of the secondary electrons liberated by the HCP slowing down. However, an analysis of the uncertainties involved in the TST calculations and experiments (i.e. experimental measurement of f(D) at high levels of dose, sample light self-absorption and accuracy in the estimation of D R, especially towards the end of the HCP track) indicate that these may be too large to enable a definite conclusion. More accurate estimation of sample light self-absorption, improved measurements of f(D) and full-track Monte Carlo calculations of D R incorporating improvements of the low-energy electron transport are indicated in order to reduce uncertainties and enable a final conclusion. (authors)

  2. Analysis of Rail Vehicle Suspension Spring with Special Emphasis on Curving, Tracking and Tractive Efforts

    Science.gov (United States)

    Kumbhalkar, M. A.; Bhope, D. V.; Vanalkar, A. V.

    2016-09-01

    The dynamics of the rail vehicle represents a balance between the forces acting between wheel and rail, the inertia forces and the forces exerted by suspension and articulation. Axial loading on helical spring causes vertical deflection at straight track but failures calls to investigate for lateral and longitudinal loading at horizontal and vertical curves respectively. Goods carrying vehicle has the frequent failures of middle axle inner suspension spring calls for investigation. The springs are analyzed for effect of stress concentration due to centripetal force and due to tractive and breaking effort. This paper also discusses shear failure analysis of spring at curvature and at uphill at various speeds for different loading condition analytically and by finite element analysis. Two mass rail vehicle suspension systems have been analyzed for vibration responses analytically using mathematical tool Matlab Simulink and the same will be evaluated using FFT vibration analyzer to find peak resonance in vertical, lateral and longitudinal direction. The results prove that the suspension acquires high repeated load in vertical and lateral direction due to tracking and curving causes maximum stress concentration on middle axle suspension spring as height of this spring is larger than end axle spring in primary suspension system and responsible for failure of middle axle suspension spring due to high stress acquisition.

  3. Social attention in ASD: A review and meta-analysis of eye-tracking studies.

    Science.gov (United States)

    Chita-Tegmark, Meia

    2016-01-01

    Determining whether social attention is reduced in Autism Spectrum Disorder (ASD) and what factors influence social attention is important to our theoretical understanding of developmental trajectories of ASD and to designing targeted interventions for ASD. This meta-analysis examines data from 38 articles that used eye-tracking methods to compare individuals with ASD and TD controls. In this paper, the impact of eight factors on the size of the effect for the difference in social attention between these two groups are evaluated: age, non-verbal IQ matching, verbal IQ matching, motion, social content, ecological validity, audio input and attention bids. Results show that individuals with ASD spend less time attending to social stimuli than typically developing (TD) controls, with a mean effect size of 0.55. Social attention in ASD was most impacted when stimuli had a high social content (showed more than one person). This meta-analysis provides an opportunity to survey the eye-tracking research on social attention in ASD and to outline potential future research directions, more specifically research of social attention in the context of stimuli with high social content. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Robust model-based analysis of single-particle tracking experiments with Spot-On.

    Science.gov (United States)

    Hansen, Anders S; Woringer, Maxime; Grimm, Jonathan B; Lavis, Luke D; Tjian, Robert; Darzacq, Xavier

    2018-01-04

    Single-particle tracking (SPT) has become an important method to bridge biochemistry and cell biology since it allows direct observation of protein binding and diffusion dynamics in live cells. However, accurately inferring information from SPT studies is challenging due to biases in both data analysis and experimental design. To address analysis bias, we introduce 'Spot-On', an intuitive web-interface. Spot-On implements a kinetic modeling framework that accounts for known biases, including molecules moving out-of-focus, and robustly infers diffusion constants and subpopulations from pooled single-molecule trajectories. To minimize inherent experimental biases, we implement and validate stroboscopic photo-activation SPT (spaSPT), which minimizes motion-blur bias and tracking errors. We validate Spot-On using experimentally realistic simulations and show that Spot-On outperforms other methods. We then apply Spot-On to spaSPT data from live mammalian cells spanning a wide range of nuclear dynamics and demonstrate that Spot-On consistently and robustly infers subpopulation fractions and diffusion constants. © 2018, Hansen et al.

  5. Risk Analysis of Marine Structures

    DEFF Research Database (Denmark)

    Hansen, Peter Friis

    1998-01-01

    Basic concepts of risk analysis is introduced. Formulation and analysis of fault and event trees are treated.......Basic concepts of risk analysis is introduced. Formulation and analysis of fault and event trees are treated....

  6. Qualitative Video Analysis of Track-Cycling Team Pursuit in World-Class Athletes.

    Science.gov (United States)

    Sigrist, Samuel; Maier, Thomas; Faiss, Raphael

    2017-11-01

    Track-cycling team pursuit (TP) is a highly technical effort involving 4 athletes completing 4 km from a standing start, often in less than 240 s. Transitions between athletes leading the team are obviously of utmost importance. To perform qualitative video analyses of transitions of world-class athletes in TP competitions. Videos captured at 100 Hz were recorded for 77 races (including 96 different athletes) in 5 international track-cycling competitions (eg, UCI World Cups and World Championships) and analyzed for the 12 best teams in the UCI Track Cycling TP Olympic ranking. During TP, 1013 transitions were evaluated individually to extract quantitative (eg, average lead time, transition number, length, duration, height in the curve) and qualitative (quality of transition start, quality of return at the back of the team, distance between third and returning rider score) variables. Determination of correlation coefficients between extracted variables and end time allowed assessment of relationships between variables and relevance of the video analyses. Overall quality of transitions and end time were significantly correlated (r = .35, P = .002). Similarly, transition distance (r = .26, P = .02) and duration (r = .35, P = .002) were positively correlated with end time. Conversely, no relationship was observed between transition number, average lead time, or height reached in the curve and end time. Video analysis of TP races highlights the importance of quality transitions between riders, with preferably swift and short relays rather than longer lead times for faster race times.

  7. Spatial and Temporal Analysis on the Distribution of Active Radio-Frequency Identification (RFID Tracking Accuracy with the Kriging Method

    Directory of Open Access Journals (Sweden)

    Xin Liu

    2014-10-01

    Full Text Available Radio frequency identification (RFID technology has already been applied in a number of areas to facilitate the tracking process. However, the insufficient tracking accuracy of RFID is one of the problems that impedes its wider application. Previous studies focus on examining the accuracy of discrete points RFID, thereby leaving the tracking accuracy of the areas between the observed points unpredictable. In this study, spatial and temporal analysis is applied to interpolate the continuous distribution of RFID tracking accuracy based on the Kriging method. An implementation trial has been conducted in the loading and docking area in front of a warehouse to validate this approach. The results show that the weak signal area can be easily identified by the approach developed in the study. The optimum distance between two RFID readers and the effect of the sudden removal of readers are also presented by analysing the spatial and temporal variation of RFID tracking accuracy. This study reveals the correlation between the testing time and the stability of RFID tracking accuracy. Experimental results show that the proposed approach can be used to assist the RFID system setup process to increase tracking accuracy.

  8. Spatial and temporal analysis on the distribution of active radio-frequency identification (RFID) tracking accuracy with the Kriging method.

    Science.gov (United States)

    Liu, Xin; Shannon, Jeremy; Voun, Howard; Truijens, Martijn; Chi, Hung-Lin; Wang, Xiangyu

    2014-10-29

    Radio frequency identification (RFID) technology has already been applied in a number of areas to facilitate the tracking process. However, the insufficient tracking accuracy of RFID is one of the problems that impedes its wider application. Previous studies focus on examining the accuracy of discrete points RFID, thereby leaving the tracking accuracy of the areas between the observed points unpredictable. In this study, spatial and temporal analysis is applied to interpolate the continuous distribution of RFID tracking accuracy based on the Kriging method. An implementation trial has been conducted in the loading and docking area in front of a warehouse to validate this approach. The results show that the weak signal area can be easily identified by the approach developed in the study. The optimum distance between two RFID readers and the effect of the sudden removal of readers are also presented by analysing the spatial and temporal variation of RFID tracking accuracy. This study reveals the correlation between the testing time and the stability of RFID tracking accuracy. Experimental results show that the proposed approach can be used to assist the RFID system setup process to increase tracking accuracy.

  9. Dissipation kinetics of asparagine in soil measured by compound-specific analysis with metabolite tracking

    DEFF Research Database (Denmark)

    Czaban, Weronika; Rasmussen, Jim; Nicolaisen, Mogens

    2016-01-01

    labeled glutamic acid were detected in soil. This highlights the fast turnover of amino acid in soil and that the estimation of concentration of the formed compounds is important when evaluating plant available organic N. Efficiency of the compound-specific analysis showed to be a powerful technique......Estimating the potential for direct plant acquisition of organic N, in particular amino acids, requires assessment of their turnover times in soil. It is well known from 14C studies that mineralization of amino acids occurs within hours, but mineralization to 14CO2 does not indicate the rate...... of disappearance of the intact amino acid or the possible formation of metabolites during amino acid dissipation. We here used compound-specific isotope analysis with metabolite tracking to investigate the dissipation rate of universally labeled intact 13C15N-asparagine at two concentrations and the subsequent...

  10. Analysis for lateral deflection of railroad track under quasi-static loading

    Science.gov (United States)

    2013-10-15

    This paper describes analyses to examine the lateral : deflection of railroad track subjected to quasi-static loading. : Rails are assumed to behave as beams in bending. Movement : of the track in the lateral plane is constrained by idealized : resis...

  11. Track structure model for damage to mammalian cell cultures during solar proton events

    Science.gov (United States)

    Cucinotta, F. A.; Wilson, J. W.; Townsend, L. W.; Shinn, J. L.; Katz, R.

    1992-01-01

    Solar proton events (SPEs) occur infrequently and unpredictably, thus representing a potential hazard to interplanetary space missions. Biological damage from SPEs will be produced principally through secondary electron production in tissue, including important contributions due to delta rays from nuclear reaction products. We review methods for estimating the biological effectiveness of SPEs using a high energy proton model and the parametric cellular track model. Results of the model are presented for several of the historically largest flares using typical levels and body shielding.

  12. Measuring radon levels at high exposures with alpha-track detectors. Calibration and analysis

    International Nuclear Information System (INIS)

    Aanestad, Katrine; Roennqvist, Tryggve; Jensen, Camilla Lunder

    2007-01-01

    This report presents the TADTAC method - a track area dependent total area counting method, for measuring radon levels at high exposures with alpha-track detectors. Normally radon levels are measured by counting individual tracks. The TADTAC method is developed by Gammadata Maaleteknik AB and implemented at The Norwegian Radiation Protection Authority. Alpha-track detectors used for testing and calibrating the method where exposed at Physikalisch-Technische Bundesanstalt (PTB) in Germany. (author) (tk)

  13. Thyroid cell irradiation by radioiodines: a new Monte Carlo electron track-structure code

    Directory of Open Access Journals (Sweden)

    Christophe Champion

    2007-09-01

    Full Text Available The most significant impact of the Chernobyl accident is the increased incidence of thyroid cancer among children who were exposed to short-lived radioiodines and 131-iodine. In order to accurately estimate the radiation dose provided by these radioiodines, it is necessary to know where iodine is incorporated. To do that, the distribution at the cellular level of newly organified iodine in the immature rat thyroid was performed using secondary ion mass microscopy (NanoSIMS50. Actual dosimetric models take only into account the averaged energy and range of beta particles of the radio-elements and may, therefore, imperfectly describe the real distribution of dose deposit at the microscopic level around the point sources. Our approach is radically different since based on a track-structure Monte Carlo code allowing following-up of electrons down to low energies (~ 10eV what permits a nanometric description of the irradiation physics. The numerical simulations were then performed by modelling the complete disintegrations of the short-lived iodine isotopes as well as of 131I in new born rat thyroids in order to take into account accurate histological and biological data for the thyroid gland.O impacto mais significante do acidente de Chernobyl é o crescimento da incidência de câncer de tireóide em crianças que foram expostas a radioiodos de vida curta e ao Iodo-131. Na estimativa precisa da dose de radiação fornecida por esses radioiodos, é necessário conhecer onde o iodo está incorporado. Para obtermos esse resultado, a distribuição em nível celular de iodo recentemente organificado na tireóde de ratos imaturos foi realizada usando microscopia de massa iônica secundária (NanoSIMS50. Modelos dosimétricos atuais consideram apenas a energia média das partículas beta dos radioelementos e pode, imperfeitamente descrever a distribuição real de dose ao nível microscópico em torno dos pontos pesquisados. Nossa abordagem

  14. Safety analysis of an ancient iron structure

    International Nuclear Information System (INIS)

    Kweon, Young Gak; Yoon, Byeng Hyun; Lim, Jae Kyun; Lee, Sung Bum

    2002-01-01

    Safety analysis of an ancient iron structure, Danggan, constructed over than a thousand years ago was performed. The structure is consisted of 24 iron cylinders of which the total height is about 15.4 m. The analysis was done by the ultrasonic test to measure thickness of each cylinder, the radiographic test to investigate the inside of cylinders, the measurement of inclination of the structure and the structural analysis to estimate the stress level applied by the wind. Results showed that Danggan structure was on state being well safe at present, but it could be dangerous when the inclination of the structure becomes severely progressive.

  15. Comparison of SEM and Optical Analysis of DT Neutron Tracks in CR-39 Detectors

    Energy Technology Data Exchange (ETDEWEB)

    P.A. Mosier-Boss, L.P.G. Forsley, P. Carbonnelle, M.S. Morey, J.R. Tinsley, J. P. Hurley, F.E. Gordon

    2012-01-01

    A solid state nuclear track detector, CR-39, was exposed to DT neutrons. After etching, the resultant tracks were analyzed using both an optical microscope and a scanning electron microscope (SEM). In this communication, both methods of analyzing DT neutron tracks are discussed.

  16. Nonlinear structural analysis using integrated force method

    Indian Academy of Sciences (India)

    Force method in the pre-computer era was the popular analysis tool for civil, mechanical and aerospace engineering structures. This popularity can be attributed to its ability to determine accurate estimates of forces in the structure. During the formulative period of structural analysis by matrix methods, earnest research was ...

  17. Sweep excitation with order tracking: A new tactic for beam crack analysis

    Science.gov (United States)

    Wei, Dongdong; Wang, KeSheng; Zhang, Mian; Zuo, Ming J.

    2018-04-01

    Crack detection in beams and beam-like structures is an important issue in industry and has attracted numerous investigations. A local crack leads to global system dynamics changes and produce non-linear vibration responses. Many researchers have studied these non-linearities for beam crack diagnosis. However, most reported methods are based on impact excitation and constant frequency excitation. Few studies have focused on crack detection through external sweep excitation which unleashes abundant dynamic characteristics of the system. Together with a signal resampling technique inspired by Computed Order Tracking, this paper utilize vibration responses under sweep excitations to diagnose crack status of beams. A data driven method for crack depth evaluation is proposed and window based harmonics extracting approaches are studied. The effectiveness of sweep excitation and the proposed method is experimentally validated.

  18. A novel tracking tool for the analysis of plant-root tip movements

    International Nuclear Information System (INIS)

    Russino, A; Ascrizzi, A; Popova, L; Tonazzini, A; Mancuso, S; Mazzolai, B

    2013-01-01

    The growth process of roots consists of many activities, such as exploring the soil volume, mining minerals, avoiding obstacles and taking up water to fulfil the plant's primary functions, that are performed differently, depending on environmental conditions. Root movements are strictly related to a root decision strategy, which helps plants to survive under stressful conditions by optimizing energy consumption. In this work, we present a novel image-analysis tool to study the kinematics of the root tip (apex), named analyser for root tip tracks (ARTT). The software implementation combines a segmentation algorithm with additional software imaging filters in order to realize a 2D tip detection. The resulting paths, or tracks, arise from the sampled tip positions through the acquired images during the growth. ARTT allows work with no markers and deals autonomously with new emerging root tips, as well as handling a massive number of data relying on minimum user interaction. Consequently, ARTT can be used for a wide range of applications and for the study of kinematics in different plant species. In particular, the study of the root growth and behaviour could lead to the definition of novel principles for the penetration and/or control paradigms for soil exploration and monitoring tasks. The software capabilities were demonstrated by experimental trials performed with Zea mays and Oryza sativa. (paper)

  19. Analysis of Base-Case Particle Tracking Results of the Base-Case Flow Fields (ID:U0160)

    International Nuclear Information System (INIS)

    C.K. Ho

    2000-01-01

    The purpose of this analysis is to provide insight into the unsaturated-zone (UZ) subsystem performance through particle tracking analyses of the base-case flow fields. The particle tracking analyses will not be used directly in total-system performance-assessment (TSPA) calculations per se. The objective of this activity is to evaluate the transport of radionuclides through the unsaturated zone and to determine how different system parameters such as matrix diffusion, sorption, water-table rise, and perched water influence the transport to the water table. Plots will be generated to determine normalized cumulative breakthrough curves for selected radionuclides. The scope of this work is limited to the particle tracking analyses of ''base-case'' flow fields that are to be used by the code FEHM (Finite Element Heat and Mass; Zyvoloski 1997) for particle tracking simulations in ''Total System Performance Assessment-Site Recommendation Report'' (TSPA-SR)

  20. Measurement of track structure parameters of low and medium energy helium and carbon ions in nanometric volumes.

    Science.gov (United States)

    Hilgers, G; Bug, M U; Rabus, H

    2017-09-12

    Ionization cluster size distributions produced in the sensitive volume of an ion-counting wall-less nanodosimeter by monoenergetic carbon ions with energies between 45 MeV and 150 MeV were measured at the TANDEM-ALPI ion accelerator facility complex of the LNL-INFN in Legnaro. Those produced by monoenergetic helium ions with energies between 2 MeV and 20 MeV were measured at the accelerator facilities of PTB and with a 241 Am alpha particle source. C 3 H 8 was used as the target gas. The ionization cluster size distributions were measured in narrow beam geometry with the primary beam passing the target volume at specified distances from its centre, and in broad beam geometry with a fan-like primary beam. By applying a suitable drift time window, the effective size of the target volume was adjusted to match the size of a DNA segment. The measured data were compared with the results of simulations obtained with the PTB Monte Carlo code PTra. Before the comparison, the simulated cluster size distributions were corrected with respect to the background of additional ionizations produced in the transport system of the ionized target gas molecules. Measured and simulated characteristics of the particle track structure are in good agreement for both types of primary particles and for both types of the irradiation geometry. As the range in tissue of the ions investigated is within the typical extension of a spread-out Bragg peak, these data are useful for benchmarking not only 'general purpose' track structure simulation codes, but also treatment planning codes used in hadron therapy. Additionally, these data sets may serve as a data base for codes modelling the induction of radiation damages at the DNA-level as they almost completely characterize the ionization component of the nanometric track structure.

  1. Measurement of track structure parameters of low and medium energy helium and carbon ions in nanometric volumes

    Science.gov (United States)

    Hilgers, G.; Bug, M. U.; Rabus, H.

    2017-10-01

    Ionization cluster size distributions produced in the sensitive volume of an ion-counting wall-less nanodosimeter by monoenergetic carbon ions with energies between 45 MeV and 150 MeV were measured at the TANDEM-ALPI ion accelerator facility complex of the LNL-INFN in Legnaro. Those produced by monoenergetic helium ions with energies between 2 MeV and 20 MeV were measured at the accelerator facilities of PTB and with a 241Am alpha particle source. C3H8 was used as the target gas. The ionization cluster size distributions were measured in narrow beam geometry with the primary beam passing the target volume at specified distances from its centre, and in broad beam geometry with a fan-like primary beam. By applying a suitable drift time window, the effective size of the target volume was adjusted to match the size of a DNA segment. The measured data were compared with the results of simulations obtained with the PTB Monte Carlo code PTra. Before the comparison, the simulated cluster size distributions were corrected with respect to the background of additional ionizations produced in the transport system of the ionized target gas molecules. Measured and simulated characteristics of the particle track structure are in good agreement for both types of primary particles and for both types of the irradiation geometry. As the range in tissue of the ions investigated is within the typical extension of a spread-out Bragg peak, these data are useful for benchmarking not only ‘general purpose’ track structure simulation codes, but also treatment planning codes used in hadron therapy. Additionally, these data sets may serve as a data base for codes modelling the induction of radiation damages at the DNA-level as they almost completely characterize the ionization component of the nanometric track structure.

  2. Archeological Echocardiography: Digitization and Speckle Tracking Analysis of Archival Echocardiograms in the HyperGEN Study.

    Science.gov (United States)

    Aguilar, Frank G; Selvaraj, Senthil; Martinez, Eva E; Katz, Daniel H; Beussink, Lauren; Kim, Kwang-Youn A; Ping, Jie; Rasmussen-Torvik, Laura; Goyal, Amita; Sha, Jin; Irvin, Marguerite R; Arnett, Donna K; Shah, Sanjiv J

    2016-03-01

    Several large epidemiologic studies and clinical trials have included echocardiography, but images were stored in analog format and these studies predated tissue Doppler imaging (TDI) and speckle tracking echocardiography (STE). We hypothesized that digitization of analog echocardiograms, with subsequent quantification of cardiac mechanics using STE, is feasible, reproducible, accurate, and produces clinically valid results. In the NHLBI HyperGEN study (N = 2234), archived analog echocardiograms were digitized and subsequently analyzed using STE to obtain tissue velocities/strain. Echocardiograms were assigned quality scores and inter-/intra-observer agreement was calculated. Accuracy was evaluated in: (1) a separate second study (N = 50) comparing prospective digital strain versus post hoc analog-to-digital strain, and (2) in a third study (N = 95) comparing prospectively obtained TDI e' velocities with post hoc STE e' velocities. Finally, we replicated previously known associations between tissue velocities/strain, conventional echocardiographic measurements, and clinical data. Of the 2234 HyperGEN echocardiograms, 2150 (96.2%) underwent successful digitization and STE analysis. Inter/intra-observer agreement was high for all STE parameters, especially longitudinal strain (LS). In accuracy studies, LS performed best when comparing post hoc STE to prospective digital STE for strain analysis. STE-derived e' velocities correlated with, but systematically underestimated, TDI e' velocity. Several known associations between clinical variables and cardiac mechanics were replicated in HyperGEN. We also found a novel independent inverse association between fasting glucose and LS (adjusted β = -2.4 [95% CI -3.6, -1.2]% per 1-SD increase in fasting glucose; P echocardiography, the digitization and speckle tracking analysis of archival echocardiograms, is feasible and generates indices of cardiac mechanics similar to contemporary studies. © 2015, Wiley Periodicals, Inc.

  3. Decision analysis for deteriorating structures

    International Nuclear Information System (INIS)

    Val, Dimitri V.; Stewart, Mark G.

    2005-01-01

    Measures that improve durability of a structure usually increase its initial cost. Thus, in order to make a decision about a cost-effective solution the life-cycle cost of a structure including cost of structural failure needs to be considered. Due to uncertainties associated with structural properties, loads and environmental conditions the cost of structural failure is a random variable. The paper derives probability distributions of the cost of failure of a single structure and a group of identical structures when single or multiple failures are possible during the service life of a structure. The probability distributions are based on cumulative probabilities of failure of a single structure over its service life. It is assumed that failures occur at discrete points in time, the cost of failure set at the time of decision making remains constant for a particular design solution and the discount rate is a deterministic parameter not changing with time. The probability distributions can be employed to evaluate the expected life-cycle cost or the expected utility, which is then used in decision making. An example, which considers the selection of durability specifications for a reinforced concrete structure built on the coast, illustrates the use of the derived probability distributions

  4. Early Mission Orbit Determination Error Analysis Results for Low-Earth Orbiting Missions using TDRSS Differenced One-way Doppler Tracking Data

    Science.gov (United States)

    Marr, Greg C.

    2003-01-01

    Differencing multiple, simultaneous Tracking and Data Relay Satellite System (TDRSS) one-way Doppler passes can yield metric tracking data usable for orbit determination for (low-cost) spacecraft which do not have TDRSS transponders or local oscillators stable enough to allow the one-way TDRSS Doppler tracking data to be used for early mission orbit determination. Orbit determination error analysis results are provided for low Earth orbiting spacecraft for various early mission tracking scenarios.

  5. Tropical Cyclone Track and Structure Sensitivity to Initialization in Idealized Simulations: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Yang Cao

    2011-01-01

    Full Text Available In the absence of environmental steering, tropical cyclone (TC motion largely reflects ¡§beta drift¡¨ owing to differential planetary vorticity advection by the storm¡¦s outer circulation. It is known that model physics choices (especially those relating to convection can significantly alter these outer winds and thus the storm track. Here, semi-idealized simulations are used to explore the influence of the initialization on subsequent vortex evolution and motion. Specifically, TCs bred from a buoyant ¡§bubble¡¨ are compared to bogussed vortices having a wide variety of parameterized shapes and sizes matching observations.

  6. PLASTIC ANALYSIS OF STEEL FRAME STRUCTURE

    Directory of Open Access Journals (Sweden)

    M. Rogac

    2013-05-01

    Full Text Available This paper presents the plastic analysis of steel frame structure loaded by gravity loads. By applying the cinematic theorem of ultimate analysis, the ultimate load for the case of elastic - ideally plastic material is calculated. The identical structure was treated in the computer program SAP2000 where the zone of material reinforcement in the plastic area was covered. Keywords: Steel frame structure, plastic analysis, ultimate gravity load, material reinforcement.

  7. Robustness Analysis of Kinetic Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2009-01-01

    Kinetic structures in architecture follows a new trend which is emerging in responsive architecture coined by Nicholas Negroponte when he proposed that architecture may benefit from the integration of computing power into built spaces and structures, and that better performing, more rational...

  8. Tracking and Analysis Framework (TAF) model documentation and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Bloyd, C.; Camp, J.; Conzelmann, G. [and others

    1996-12-01

    With passage of the 1990 Clean Air Act Amendments, the United States embarked on a policy for controlling acid deposition that has been estimated to cost at least $2 billion. Title IV of the Act created a major innovation in environmental regulation by introducing market-based incentives - specifically, by allowing electric utility companies to trade allowances to emit sulfur dioxide (SO{sub 2}). The National Acid Precipitation Assessment Program (NAPAP) has been tasked by Congress to assess what Senator Moynihan has termed this {open_quotes}grand experiment.{close_quotes} Such a comprehensive assessment of the economic and environmental effects of this legislation has been a major challenge. To help NAPAP face this challenge, the U.S. Department of Energy (DOE) has sponsored development of an integrated assessment model, known as the Tracking and Analysis Framework (TAF). This section summarizes TAF`s objectives and its overall design.

  9. Numerical Analysis on Color Preference and Visual Comfort from Eye Tracking Technique

    Directory of Open Access Journals (Sweden)

    Ming-Chung Ho

    2015-01-01

    Full Text Available Color preferences in engineering are very important, and there exists relationship between color preference and visual comfort. In this study, there are thirty university students who participated in the experiment, supplemented by pre- and posttest questionnaires, which lasted about an hour. The main purpose of this study is to explore the visual effects of different color assignment with subjective color preferences via eye tracking technology. Eye-movement data through a nonlinear analysis detect slight differences in color preferences and visual comfort, suggesting effective physiological indicators as extensive future research discussed. Results found that the average pupil size of eye-movement indicators can effectively reflect the differences of color preferences and visual comfort. This study more confirmed that the subjective feeling will make people have misjudgment.

  10. An animal tracking system for behavior analysis using radio frequency identification.

    Science.gov (United States)

    Catarinucci, Luca; Colella, Riccardo; Mainetti, Luca; Patrono, Luigi; Pieretti, Stefano; Secco, Andrea; Sergi, Ilaria

    2014-09-01

    Evaluating the behavior of mice and rats has substantially contributed to the progress of research in many scientific fields. Researchers commonly observe recorded video of animal behavior and manually record their observations for later analysis, but this approach has several limitations. The authors developed an automated system for tracking and analyzing the behavior of rodents that is based on radio frequency identification (RFID) in an ultra-high-frequency bandwidth. They provide an overview of the system's hardware and software components as well as describe their technique for surgically implanting passive RFID tags in mice. Finally, the authors present the findings of two validation studies to compare the accuracy of the RFID system versus commonly used approaches for evaluating the locomotor activity and object exploration of mice.

  11. Simulations of DSB Yields and Radiation-induced Chromosomal Aberrations in Human Cells Based on the Stochastic Track Structure iIduced by HZE Particles

    Science.gov (United States)

    Ponomarev, Artem; Plante, Ianik; George, Kerry; Wu, Honglu

    2014-01-01

    The formation of double-strand breaks (DSBs) and chromosomal aberrations (CAs) is of great importance in radiation research and, specifically, in space applications. We are presenting a new particle track and DNA damage model, in which the particle stochastic track structure is combined with the random walk (RW) structure of chromosomes in a cell nucleus. The motivation for this effort stems from the fact that the model with the RW chromosomes, NASARTI (NASA radiation track image) previously relied on amorphous track structure, while the stochastic track structure model RITRACKS (Relativistic Ion Tracks) was focused on more microscopic targets than the entire genome. We have combined chromosomes simulated by RWs with stochastic track structure, which uses nanoscopic dose calculations performed with the Monte-Carlo simulation by RITRACKS in a voxelized space. The new simulations produce the number of DSBs as function of dose and particle fluence for high-energy particles, including iron, carbon and protons, using voxels of 20 nm dimension. The combined model also calculates yields of radiation-induced CAs and unrejoined chromosome breaks in normal and repair deficient cells. The joined computational model is calibrated using the relative frequencies and distributions of chromosomal aberrations reported in the literature. The model considers fractionated deposition of energy to approximate dose rates of the space flight environment. The joined model also predicts of the yields and sizes of translocations, dicentrics, rings, and more complex-type aberrations formed in the G0/G1 cell cycle phase during the first cell division after irradiation. We found that the main advantage of the joined model is our ability to simulate small doses: 0.05-0.5 Gy. At such low doses, the stochastic track structure proved to be indispensable, as the action of individual delta-rays becomes more important.

  12. Simulations of DSB Yields and Radiation-induced Chromosomal Aberrations in Human Cells Based on the Stochastic Track Structure Induced by HZE Particles

    Science.gov (United States)

    Ponomarev, Artem; Plante, Ianik; George, Kerry; Wu, Honglu

    2014-01-01

    The formation of double-strand breaks (DSBs) and chromosomal aberrations (CAs) is of great importance in radiation research and, specifically, in space applications. We are presenting a new particle track and DNA damage model, in which the particle stochastic track structure is combined with the random walk (RW) structure of chromosomes in a cell nucleus. The motivation for this effort stems from the fact that the model with the RW chromosomes, NASARTI (NASA radiation track image) previously relied on amorphous track structure, while the stochastic track structure model RITRACKS (Relativistic Ion Tracks) was focused on more microscopic targets than the entire genome. We have combined chromosomes simulated by RWs with stochastic track structure, which uses nanoscopic dose calculations performed with the Monte-Carlo simulation by RITRACKS in a voxelized space. The new simulations produce the number of DSBs as function of dose and particle fluence for high-energy particles, including iron, carbon and protons, using voxels of 20 nm dimension. The combined model also calculates yields of radiation-induced CAs and unrejoined chromosome breaks in normal and repair deficient cells. The joined computational model is calibrated using the relative frequencies and distributions of chromosomal aberrations reported in the literature. The model considers fractionated deposition of energy to approximate dose rates of the space flight environment. The joined model also predicts of the yields and sizes of translocations, dicentrics, rings, and more complex-type aberrations formed in the G0/G1 cell cycle phase during the first cell division after irradiation. We found that the main advantage of the joined model is our ability to simulate small doses: 0.05-0.5 Gy. At such low doses, the stochastic track structure proved to be indispensable, as the action of individual delta-rays becomes more important.

  13. Secondary ion mass spectrometry combined with alpha track detection for isotope abundance ratio analysis of individual uranium-bearing particles.

    Science.gov (United States)

    Esaka, Fumitaka; Magara, Masaaki

    2014-03-01

    Secondary ion mass spectrometry (SIMS) was used in combination with alpha track detection for the efficient analysis of uranium-bearing particles with higher (235)U abundances in environmental samples. A polycarbonate film containing particles was prepared and placed in contact with a CR-39 plastic detector. After exposure for 28 days, the detector was etched in a NaOH solution and each uranium-bearing particle was identified through observation of the alpha tracks recorded in the detector. A portion of the film containing each uranium-bearing particle was cut out and put onto a glassy carbon planchet. The films on the planchet were decomposed through plasma ashing for subsequent uranium abundance ratio analysis with SIMS. The alpha track-SIMS analysis of 10 uranium-bearing particles in a sample taken from a nuclear facility enabled n((235)U)/n((238)U) abundance ratios in the range 0.0072-0.25 to be detected, which were significantly higher than those obtained by SIMS without alpha track detection. The duration of the whole analytical process for analysis of 10 particles was about 32 days. The detection efficiency was calculated to be 27.1±6.5%, based on the analysis of the particles in uranium reference materials. The detection limits, defined as the diameter of the particle which produces alpha tracks more than one for a 28-days exposure, were estimated to be 0.8, 0.9, 1.1, 2.1 and 3.0 μm for the particles having the same uranium abundance ratios with NBL CRM U850, U500, U350, U050 and U010 reference materials, respectively. The use of alpha track detection for subsequent SIMS analysis is an inexpensive and an efficient way to measure uranium-bearing particles with higher (235)U abundances. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. Amusement Park Physics in Panggon Lunjak (Trampoline: Analysis of Kinematics and Energy Use Video Tracking

    Directory of Open Access Journals (Sweden)

    Akhmad Yusuf

    2017-12-01

    Full Text Available Panggon Lunjak (trampoline is one of the famous amusement parks among the people that we can use as a recreation to enjoy a pleasant sensation. Without us knowing the amusement park that we often encounter is actually the result of the application of science and technology, especially in the field of physics, because it is amusement park for student of science is a real laboratory or the giant laboratory that we can use as a study of physics concepts and as research materials. Panggon Lunjak (trampoline motion is very close to the harmonic  motion where the resulting graph of the sinus so that on the graph will be in the analysis of  kinematics and energy phenomena, so that research on simple harmonic motion materials is not limited to research using pendulum motion and spring load motion which is often exemplified as research on harmonic motion. The purpose of this study is to analyze the physical aspects of Panggon Lunjak (trampoline motion based on the laws of physics on the concept of kinematics and analyze energy, Where the mechanical energy of addition between potential energy and kinetic energy (Conservation of energy. The analysis is done by using video tracking. Based on the analysis done using people as a mass, the result of the amplitude, the spring constant, angular frequency, and the law of conservation of energy on the Panggon Lunjak (trampoline is true. This analysis activity will be well used as a physics learning for students.

  15. An ALE formulation of embedded boundary methods for tracking boundary layers in turbulent fluid-structure interaction problems

    Science.gov (United States)

    Farhat, Charbel; Lakshminarayan, Vinod K.

    2014-04-01

    Embedded Boundary Methods (EBMs) for Computational Fluid Dynamics (CFD) are usually constructed in the Eulerian setting. They are particularly attractive for complex Fluid-Structure Interaction (FSI) problems characterized by large structural motions and deformations. They are also critical for flow problems with topological changes and FSI problems with cracking. For all of these problems, the alternative Arbitrary Lagrangian-Eulerian (ALE) methods are often unfeasible because of the issue of mesh crossovers. However for viscous flows, Eulerian EBMs for CFD do not track the boundary layers around dynamic rigid or flexible bodies. Consequently, the application of these methods to viscous FSI problems requires either a high mesh resolution in a large part of the computational fluid domain, or adaptive mesh refinement. Unfortunately, the first option is computationally inefficient, and the second one is labor intensive. For these reasons, an alternative approach is proposed in this paper for maintaining all moving boundary layers resolved during the simulation of a turbulent FSI problem using an EBM for CFD. In this approach, which is simple and computationally reasonable, the underlying non-body-fitted mesh is rigidly translated and/or rotated in order to track the rigid component of the motion of the dynamic obstacle. Then, the flow computations away from the embedded surface are performed using the ALE framework, and the wall boundary conditions are treated by the chosen Eulerian EBM for CFD. Hence, the solution of the boundary layer tracking problem proposed in this paper can be described as an ALE implementation of a given EBM for CFD. Its basic features are illustrated with the Large Eddy Simulation using a non-body-fitted mesh of a turbulent flow past an airfoil in heaving motion. Its strong potential for the solution of challenging FSI problems at reasonable computational costs is also demonstrated with the simulation of turbulent flows past a family of

  16. Genetic diversity analysis of PvCSP and its application in tracking of Plasmodium vivax.

    Science.gov (United States)

    Zhang, Ling-Ling; Yao, Li-Nong; Chen, Hua-Liang; Lu, Qiao-Yi; Ruan, Wei

    2018-03-08

    Plasmodium vivax remains a potential cause of morbidity and mortality for people living where it is endemic. Understanding the regional genetic diversity of P. vivax is valuable for studying population dynamics and tracing the origins of parasites. The Plasmodium vivax circumsporozoite gene (PvCSP) is highly polymorphic and has been used previously as a marker in P. vivax population studies. The aim of this study is to investigate the genetic diversity of the PvCSP, to provide more genetic polymorphism data for further studies on P. vivax population structure, and tracking of the origin of clinical cases. Nested PCR and DNA sequencing of the PvCSP were performed to obtain nucleotide sequences of P. vivax isolates collected from Zhejiang province, China, between 2006 and 2014. To investigate the genetic diversity of PvCSP, the nucleotide sequences and amino acid sequences of the PvCSP were analyzed using DNAstar, Mega software and the phylogenetic tree constructed. The relatedness between the polymorphism and infection source were also analyzed using the SPSS software. The 66 P. vivax isolates collected from Zhejiang province were either indigenous cases or cases imported from different regions of the world. All 66 P. vivax isolates belonged to the VK210 variant. Fourteen different Peptide Repeat Motifs (PRMs) were detected in the Central Repeat Region (CRR) of PvCSP, among which, two PRMs of GDRADGQPA and GDRAAGQPA were widely distributed in all isolates. Several polymorphic characteristics of the VK210 variant were observed, including the insertion sequence of 12 peptides, the frequency of the GGNA repeat, the frequency of the PRMs repeat in CRR, and the frequency of the PRM of GNGAGGQAA repeat, which were indicative for tracking the parasite. This study presents abundant genetic diversity in the PvCSP marker among P. vivax strains around the world. The genetic data are valuable to expand the polymorphism information on P. vivax, which could be helpful for

  17. Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This test method describes the use of solid-state track recorders (SSTRs) for neutron dosimetry in light-water reactor (LWR) applications. These applications extend from low neutron fluence to high neutron fluence, including high power pressure vessel surveillance and test reactor irradiations as well as low power benchmark field measurement. (1) This test method replaces Method E 418. This test method is more detailed and special attention is given to the use of state-of-the-art manual and automated track counting methods to attain high absolute accuracies. In-situ dosimetry in actual high fluence-high temperature LWR applications is emphasized. 1.2 This test method includes SSTR analysis by both manual and automated methods. To attain a desired accuracy, the track scanning method selected places limits on the allowable track density. Typically good results are obtained in the range of 5 to 800 000 tracks/cm2 and accurate results at higher track densities have been demonstrated for some cases. (2) Trac...

  18. COMPARATIVE ANALYSIS OF STEEL AND ALUMINUM STRUCTURES

    Directory of Open Access Journals (Sweden)

    Josip Peko

    2016-12-01

    Full Text Available This study examined steel and aluminum variants of modern exhibition structures in which the main design requirements include low weight (increased span/depth ratio, transportation, and construction and durability (resistance to corrosion. This included a design situation in which the structural application of aluminum alloys provided an extremely convenient and practical solution. Viability of an aluminum structure depends on several factors and requires a detailed analysis. The overall conclusion of the study indicated that aluminum can be used as a structural material and as a viable alternative to steel for Croatian snow and wind load values and evidently in cases in which positive properties of aluminum are required for structural design. Furthermore, a structural fire analysis was conducted for an aluminum variant structure by using a zone model for realistic fire analysis. The results suggested that passive fire protection for the main structural members was not required in the event of areal fire with duration of 60 min.

  19. NASA Structural Analysis System (NASTRAN)

    Science.gov (United States)

    Purves, L.

    1991-01-01

    Program aids in structural design of wide range of objects, from high-impact printer parts to turbine engine blades, and fully validated. Since source code included, NASTRAN modified or enhanced for new applications.

  20. Autodesk robot structural analysis professional 2016 essentials

    CERN Document Server

    Marsh, Ken

    2016-01-01

    Autodesk Robot Structural Analysis Professional 2016 - Essentials is an excellent introduction to the essential features, functions, and workflows of Autodesk Robot Structural Analysis Professional. Master the tools you will need to make Robot work for you: Go from zero to proficiency with this thorough and detailed introduction to the essential concepts and workflows of Robot Structural Analysis Professional 2016. - Demystify the interface - Manipulate and manage Robot tables like a pro - Learn how to use Robot's modeling tools - Master loading techniques - Harness Robot automated load combinations - Decipher simplified seismic loading - Discover workflows for steel and concrete design - Gain insights to help troubleshoot issues Guided exercises are provided to help cement fundamental concepts in Robot Structural Analysis and drive home key functions. Get up to speed quickly with this essential text and add Robot Structural Analysis Professional 2016 to your analysis and design toolbox. New in 2016: AWC-NDS ...

  1. Autodesk Robot Structural Analysis Professional 2016 essentials

    CERN Document Server

    Marsh, Ken

    2016-01-01

    Autodesk Robot Structural Analysis Professional 2016 - Essentials is an excellent introduction to the essential features, functions, and workflows of Autodesk Robot Structural Analysis Professional. Master the tools you will need to make Robot work for you: Go from zero to proficiency with this thorough and detailed introduction to the essential concepts and workflows of Robot Structural Analysis Professional 2016. - Demystify the interface - Manipulate and manage Robot tables like a pro - Learn how to use Robot's modeling tools - Master loading techniques - Harness Robot automated load combinations - Decipher simplified seismic loading - Discover workflows for steel and concrete design - Gain insights to help troubleshoot issues Guided exercises are provided to help cement fundamental concepts in Robot Structural Analysis and drive home key functions. Get up to speed quickly with this essential text and add Robot Structural Analysis Professional 2016 to your analysis and design toolbox. New in 2016: AWC-NDS ...

  2. Automated analysis and design of complex structures

    International Nuclear Information System (INIS)

    Wilson, E.L.

    1977-01-01

    The present application of optimum design appears to be restricted to components of the structure rather than to the total structural system. Since design normally involved many analysis of the system any improvement in the efficiency of the basic methods of analysis will allow more complicated systems to be designed by optimum methods. The evaluation of the risk and reliability of a structural system can be extremely important. Reliability studies have been made of many non-structural systems for which the individual components have been extensively tested and the service environment is known. For such systems the reliability studies are valid. For most structural systems, however, the properties of the components can only be estimated and statistical data associated with the potential loads is often minimum. Also, a potentially critical loading condition may be completely neglected in the study. For these reasons and the previous problems associated with the reliability of both linear and nonlinear analysis computer programs it appears to be premature to place a significant value on such studies for complex structures. With these comments as background the purpose of this paper is to discuss the following: the relationship of analysis to design; new methods of analysis; new of improved finite elements; effect of minicomputer on structural analysis methods; the use of system of microprocessors for nonlinear structural analysis; the role of interacting graphics systems in future analysis and design. This discussion will focus on the impact of new, inexpensive computer hardware on design and analysis methods

  3. An Analysis of Operational Total Lightning Data During Long-Track Tornadoes

    Science.gov (United States)

    Carcione, Brian C.; Stano, Geoffrey T.

    2012-01-01

    The 27 April 2011 tornado outbreak brought three distinct waves of tornadic thunderstorms to portions of Mississippi, Alabama, Tennessee, and Georgia, striking the Tennessee Valley of north Alabama and southern Tennessee particularly hard. A total of 42 tornado paths were surveyed across the fourteen county area covered by the National Weather Service (NWS) forecast office in Huntsville, Alabama. Ten of these tornadoes were on the ground for at least 20 miles, two had total path lengths over 130 miles, and six tornadoes were classified as violent (EF-4 or EF-5 on the Enhanced Fujita Scale). Many of these tornadoes occurred within the domain of the North Alabama Lightning Mapping Array (NALMA), a ground-based total lightning detection network owned and operated by the NASA Marshall Space Flight Center. Since 2003, the NASA Short-term Prediction Research and Transition Center has supplied data from NALMA in real time to NWS forecast offices in Huntsville, Knoxville/Tri-Cities, Birmingham, and Nashville. Previous research has documented the utility of total lightning information in predicting tornadogenesis, particularly when combined with other remote sensing tools. Basic warning decision-making during events such as 27 April is not the most difficult part of the process; instead, the focus of warning meteorologists shifts to looking for changes in intensity or possible particularly dangerous situations, since doppler radar velocity data often cannot distinguish between weak and strong tornadoes. To that end, this research attempts to determine if any correlation exists between flash densities of the longest-tracked tornadoes over time, and the surveyed wind speeds of the tornadoes. The long-track EF-5 tornado which struck the Hackleburg, Phil Campbell, and Tanner communities in north Alabama was the primary focus of this research due to its intensity and extended life cycle. However, not all tornadoes were available for total lightning analysis due to widespread

  4. Newton’s Cradle Experiment Using Video Tracking Analysis with Multiple Representation Approach

    Science.gov (United States)

    Anissofira, A.; Latief, F. D. E.; Kholida, L.; Sinaga, P.

    2017-09-01

    This paper reports a Physics lesson using video tracking analysis applied in Newton’s Cradle experiment to train student’s multiple representation skill. This study involved 30 science high school students from class XI. In this case, Tracker software was used to verify energy conservation law, with help from data result such as graphs and tables. Newton’s Cradle is commonly used to demonstrate the law of energy and momentum conservation. It consists of swinging spherical bobs which transfers energy from one to another by means of elastic collisions. From the video analysis, it is found that there is a difference in the velocity of the two bobs of opposite ends. Furthermore, investigation of what might cause it to happen can be done by observing and analysing the recorded video. This paper discusses students’ response and teacher’s reflection after using Tracker video analysis software in the Physics lesson. Since Tracker has the ability to provide us with multiple means of data representation way, we conclude that this method could be a good alternative solution and might also be considered better than performing a hands-on experiment activity in which not every school have suitable laboratory equipment.

  5. [Application of pulse-field gel electrophoresis analysis in the source-tracking of cholera epidemics].

    Science.gov (United States)

    Wang, Ming; Li, Xiao-quan; Mo, Zi-yao; Liu, Yu-fei; Deng, Zhi-ai; Zhang, Xin-qiang; Shen, Ji-chuan; Zhang, Ying

    2007-01-01

    To apply pulse-field gel electrophoresis analysis(PFGE) in the analysis of cholera outbreak events and to determine the molecular epidemiological characteristics of Vibrio cholerae ( V. cholerae) isolates. PFGE using restriction enzyme Not I was employed in the molecular subtyping of forty-one strains of V. cholerae isolated in cholera outbreak events from 2003 to 2005 in Guangzhou area and PFGE patterns were analyzed by BioNumerics Version 4.0 software to perform cluster analysis. Pattern profiles were compared by utilizing of Dice coefficient and UPGMA(unweighted pair group method with arithmetic averages). Comparison of PFGE typing results was performed with phage-biological typing and pathogenicity-associated genes typing. In cholera outbreak events, PFGE could discriminate epidemiologically related and unrelated strains, having more discriminatory power than phage-biological typing and pathogenicity-associated genes-typing. Molecular sub-typing by PFGE could disclose the epidemiological relationships of strains from humans and the environment, providing molecular epidemiological evidence and support for the source-tracking of cholera outbreak events.

  6. BeefTracker: Spatial Tracking and Geodatabase for Beef Herd Sustainability and Lifecycle Analysis

    Science.gov (United States)

    Oltjen, J. W.; Stackhouse, J.; Forero, L.; Stackhouse-Lawson, K.

    2015-12-01

    We have developed a web-based mapping platform named "BeefTracker" to provide beef cattle ranchers a tool to determine how cattle production fits within sustainable ecosystems and to provide regional data to update beef sustainability lifecycle analysis. After initial identification and mapping of pastures, herd data (class and number of animals) are input on a mobile device in the field with a graphical pasture interface, stored in the cloud, and linked via the web to a personal computer for inventory tracking and analysis. Pasture use calculated on an animal basis provides quantifiable data regarding carrying capacity and subsequent beef production to provide more accurate data inputs for beef sustainability lifecycle analysis. After initial testing by university range scientists and ranchers we have enhanced the BeefTracker application to work when cell service is unavailable and to improve automation for increased ease of use. Thus far experiences with BeefTracker have been largely positive, due to livestock producers' perception of the need for this type of software application and its intuitive interface. We are now in the process of education to increase its use throughout the U.S.

  7. A Novel Object Based Visual Tracking

    Directory of Open Access Journals (Sweden)

    Gaofeng Li

    2014-08-01

    Full Text Available Visual tracking is a challenging task for object with changing appearance in complex scenes. Online learning and detection trackers are developed to resolve the difficulties such as non-rigid, fast motion, occlusion, rotation and scale change. We propose a novel object based tracking method to achieve robust and accurate object. The integrity of object and structural parts are combined for object tracking. Compressive sensing is employed to represent object as root filter. The sparsity of measurement matrix is constrained with superpixel segmentation. The part-based model is adopted to filter the local invariant features of parts. The structural constraint strategy between parts and object is developed for adaptive tracking. We test our proposed algorithm on challenging sequences in real world and make qualitative and quantitative analysis. The experimental results demonstrate the method runs in real time and performs well comparable to state-of-the-art tracking.

  8. EEG and Eye Tracking Signatures of Target Encoding during Structured Visual Search

    Directory of Open Access Journals (Sweden)

    Anne-Marie Brouwer

    2017-05-01

    Full Text Available EEG and eye tracking variables are potential sources of information about the underlying processes of target detection and storage during visual search. Fixation duration, pupil size and event related potentials (ERPs locked to the onset of fixation or saccade (saccade-related potentials, SRPs have been reported to differ dependent on whether a target or a non-target is currently fixated. Here we focus on the question of whether these variables also differ between targets that are subsequently reported (hits and targets that are not (misses. Observers were asked to scan 15 locations that were consecutively highlighted for 1 s in pseudo-random order. Highlighted locations displayed either a target or a non-target stimulus with two, three or four targets per trial. After scanning, participants indicated which locations had displayed a target. To induce memory encoding failures, participants concurrently performed an aurally presented math task (high load condition. In a low load condition, participants ignored the math task. As expected, more targets were missed in the high compared with the low load condition. For both conditions, eye tracking features distinguished better between hits and misses than between targets and non-targets (with larger pupil size and shorter fixations for missed compared with correctly encoded targets. In contrast, SRP features distinguished better between targets and non-targets than between hits and misses (with average SRPs showing larger P300 waveforms for targets than for non-targets. Single trial classification results were consistent with these averages. This work suggests complementary contributions of eye and EEG measures in potential applications to support search and detect tasks. SRPs may be useful to monitor what objects are relevant to an observer, and eye variables may indicate whether the observer should be reminded of them later.

  9. Separating complex compound patient motion tracking data using independent component analysis

    Science.gov (United States)

    Lindsay, C.; Johnson, K.; King, M. A.

    2014-03-01

    In SPECT imaging, motion from respiration and body motion can reduce image quality by introducing motion-related artifacts. A minimally-invasive way to track patient motion is to attach external markers to the patient's body and record their location throughout the imaging study. If a patient exhibits multiple movements simultaneously, such as respiration and body-movement, each marker location data will contain a mixture of these motions. Decomposing this complex compound motion into separate simplified motions can have the benefit of applying a more robust motion correction to the specific type of motion. Most motion tracking and correction techniques target a single type of motion and either ignore compound motion or treat it as noise. Few methods account for compound motion exist, but they fail to disambiguate super-position in the compound motion (i.e. inspiration in addition to body movement in the positive anterior/posterior direction). We propose a new method for decomposing the complex compound patient motion using an unsupervised learning technique called Independent Component Analysis (ICA). Our method can automatically detect and separate different motions while preserving nuanced features of the motion without the drawbacks of previous methods. Our main contributions are the development of a method for addressing multiple compound motions, the novel use of ICA in detecting and separating mixed independent motions, and generating motion transform with 12 DOFs to account for twisting and shearing. We show that our method works with clinical datasets and can be employed to improve motion correction in single photon emission computed tomography (SPECT) images.

  10. Stable isotope analysis and satellite tracking reveal interspecific resource partitioning of nonbreeding albatrosses off Alaska

    Science.gov (United States)

    Suryan, R.M.; Fischer, K.N.

    2010-01-01

    Albatrosses (Diomedeidae) are the most threatened family of birds globally. The three North Pacific species (Phoebastria Reichenbach, 1853) are listed as either endangered or vulnerable, with the population of Short-tailed Albatross (Phoebastria albatrus (Pallas, 1769)) less than 1% of its historical size. All North Pacific albatross species do not currently breed sympatrically, yet they do co-occur at-sea during the nonbreeding season. We incorporated stable isotope analysis with the first simultaneous satellite-tracking study of all three North Pacific albatross species while sympatric on summer (nonbreeding season) foraging grounds off Alaska. Carbon isotope ratios and tracking data identify differences in primary foraging domains of continental shelf and slope waters for Short-tailed Albatrosses and Black-footed Albatrosses (Phoebastria nigripes (Audubon, 1839)) versus oceanic waters for Laysan Albatrosses (Phoebastria immutabilis (Roths-child, 1893)). Short-tailed and Black-footed albatrosses also fed at higher trophic levels than Laysan Albatrosses. The relative trophic position of Black-footed and Laysan albatrosses, however, appears to differ between nonbreeding and breeding seasons. Spatial segregation also occurred at a broader geographic scale, with Short-tailed Albatrosses ranging more north into the Bering Sea than Black-footed Albatrosses, which ranged more to the southeast, and Laysan Albatrosses more to the southwest. Differences in carbon isotope ratios among North Pacific albatross species during the nonbreeding season likely reflect the relative proportion of neritic (more carbon enriched) versus oceanic (carbon depleted) derived nutrients, and possible differential use of fishery discards, rather than latitudinal differences in distribution.

  11. Atmospheric River Tracking Method Intercomparison Project (ARTMIP): Science Goals and Preliminary Analysis

    Science.gov (United States)

    Shields, C. A.; Rutz, J. J.; Wehner, M. F.; Ralph, F. M.; Leung, L. R.

    2017-12-01

    The Atmospheric River Tracking Method Intercomparison Project (ARTMIP) is a community effort whose purpose is to quantify uncertainties in atmospheric river (AR) research solely due to different identification and tracking techniques. Atmospheric rivers transport significant amounts of moisture in long, narrow filamentary bands, typically travelling from the subtropics to the mid-latitudes. They are an important source of regional precipitation impacting local hydroclimate, and in extreme cases, cause severe flooding and infrastructure damage in local communities. Our understanding of ARs, from forecast skill to future climate projections, all hinge on how we define ARs. By comparing a diverse set of detection algorithms, the uncertainty in our definition of ARs, (including statistics and climatology), and the implications of those uncertainties, can be analyzed and quantified. ARTMIP is divided into two broad phases that aim to answer science questions impacted by choice of detection algorithm. How robust are AR metrics such as climatology, storm duration, and relationship to extreme precipitation? How are the AR metrics in future climate projections impacted by choice of algorithm? Some algorithms rely on threshold values for water vapor. In a warmer world, the background state, by definition, is moister due to the Clausius-Clapeyron relationship, and could potentially skew results. Can uncertainty bounds be accurately placed on each metric? Tier 1 participants will apply their algorithms to a high resolution common dataset (MERRA2) and provide the greater group AR metrics (frequency, location, duration, etc). Tier 2 research will encompass sensitivity studies regarding resolution, reanalysis choice, and future climate change scenarios. ARTMIP is currently in the Tier 1 Phase and will begin Tier 2 in 2018. Preliminary metrics and analysis from Tier 1 will be presented.

  12. Image Analysis Technique for Material Behavior Evaluation in Civil Structures

    Science.gov (United States)

    Moretti, Michele; Rossi, Gianluca

    2017-01-01

    The article presents a hybrid monitoring technique for the measurement of the deformation field. The goal is to obtain information about crack propagation in existing structures, for the purpose of monitoring their state of health. The measurement technique is based on the capture and analysis of a digital image set. Special markers were used on the surface of the structures that can be removed without damaging existing structures as the historical masonry. The digital image analysis was done using software specifically designed in Matlab to follow the tracking of the markers and determine the evolution of the deformation state. The method can be used in any type of structure but is particularly suitable when it is necessary not to damage the surface of structures. A series of experiments carried out on masonry walls of the Oliverian Museum (Pesaro, Italy) and Palazzo Silvi (Perugia, Italy) have allowed the validation of the procedure elaborated by comparing the results with those derived from traditional measuring techniques. PMID:28773129

  13. Analysis and design of SSC underground structures

    International Nuclear Information System (INIS)

    Clark, G.T.

    1993-01-01

    This paper describes the analysis and design of underground structures for the Superconducting Super Collider (SSC) Project. A brief overview of the SSC Project and the types of underground structures are presented. Engineering properties and non-linear behavior of the geologic materials are reviewed. The three-dimensional sequential finite element rock-structure interaction analysis techniques developed by the author are presented and discussed. Several examples of how the method works, specific advantages, and constraints are presented. Finally, the structural designs that resulted from the sequential interaction analysis are presented

  14. FINITE ELEMENT ANALYSIS OF STRUCTURES

    Directory of Open Access Journals (Sweden)

    PECINGINA OLIMPIA-MIOARA

    2015-05-01

    Full Text Available The application of finite element method is analytical when solutions can not be applied for deeper study analyzes static, dynamic or other types of requirements in different points of the structures .In practice it is necessary to know the behavior of the structure or certain parts components of the machine under the influence of certain factors static and dynamic . The application of finite element in the optimization of components leads to economic growth , to increase reliability and durability organs studied, thus the machine itself.

  15. Dynamic Analysis of the High Speed Train and Slab Track Nonlinear Coupling System with the Cross Iteration Algorithm

    Directory of Open Access Journals (Sweden)

    Xiaoyan Lei

    2016-01-01

    Full Text Available A model for dynamic analysis of the vehicle-track nonlinear coupling system is established by the finite element method. The whole system is divided into two subsystems: the vehicle subsystem and the track subsystem. Coupling of the two subsystems is achieved by equilibrium conditions for wheel-to-rail nonlinear contact forces and geometrical compatibility conditions. To solve the nonlinear dynamics equations for the vehicle-track coupling system, a cross iteration algorithm and a relaxation technique are presented. Examples of vibration analysis of the vehicle and slab track coupling system induced by China’s high speed train CRH3 are given. In the computation, the influences of linear and nonlinear wheel-to-rail contact models and different train speeds are considered. It is found that the cross iteration algorithm and the relaxation technique have the following advantages: simple programming; fast convergence; shorter computation time; and greater accuracy. The analyzed dynamic responses for the vehicle and the track with the wheel-to-rail linear contact model are greater than those with the wheel-to-rail nonlinear contact model, where the increasing range of the displacement and the acceleration is about 10%, and the increasing range of the wheel-to-rail contact force is less than 5%.

  16. Slab track

    OpenAIRE

    Golob, Tina

    2014-01-01

    The last 160 years has been mostly used conventional track with ballasted bed, sleepers and steel rail. Ensuring the high speed rail traffic, increasing railway track capacities, providing comfortable and safe ride as well as high reliability and availability railway track, has led to development of innovative systems for railway track. The so-called slab track was first built in 1972 and since then, they have developed many different slab track systems around the world. Slab track was also b...

  17. Tracking the Structural and Electronic Configurations of a Cobalt Proton Reduction Catalyst in Water

    Energy Technology Data Exchange (ETDEWEB)

    Moonshiram, Dooshaye; Gimbert-Suriñach, Carolina [Institute; Guda, Alexander [International; Picon, Antonio; Lehmann, C. Stefan; Zhang, Xiaoyi; Doumy, Gilles; March, Anne Marie; Benet-Buchholz, Jordi [Institute; Soldatov, Alexander [International; Llobet, Antoni [Institute; Departament; Southworth, Stephen H.

    2016-08-09

    Time resolved X-ray absorption spectroscopy (X-TAS) has been used to study the light induced hydrogen evolution reaction catalyzed by a highly stable cobalt complex, [Ru(bpy)3]2+ photosensitizer and an equimolar mixture of sodium ascorbate/ascorbic acid electron donor in pure water. XANES and EXAFS analysis of a binary mixture of the octahedral Co(III) pre-catalyst and [Ru(bpy)3]2+ after illumination, revealed in-situ formation of a square pyramidal Co(II) intermediate, with electron transfer kinetics of 51 ns. On the other hand, X-TAS experiments of the complete photocatalytic system in the presence of the electron donor showed the formation of a square planar Co(I) intermediate species within a few nanoseconds followed by its decay in the microsecond timescales. The Co(I) structural assignment is supported by calculations based on density functional theory (DFT). At longer reaction times, we observe the formation of the initial Co(III) species concomitant to the decay of Co(I), thus closing the catalytic cycle. The experimental X-ray absorption spectra of the molecular species formed along the catalytic cycle are modeled using a combination of molecular orbital DFT calculations (DFT-MO) and Finite Difference Method (FDM). These findings allowed us to unequivocally assign the full mechanistic pathway followed by the catalyst as well as to determine the rate limiting step of the process, which consists in the protonation of the Co(I). This study provides a complete kinetics scheme for the hydrogen evolution reaction by a cobalt catalyst, revealing unique information for the development of better catalysts for the reductive side of hydrogen fuel cells.

  18. Fourier Analysis and Structure Determination--Part III: X-ray Crystal Structure Analysis.

    Science.gov (United States)

    Chesick, John P.

    1989-01-01

    Discussed is single crystal X-ray crystal structure analysis. A common link between the NMR imaging and the traditional X-ray crystal structure analysis is reported. Claims that comparisons aid in the understanding of both techniques. (MVL)

  19. Cretaceous—Quaternary tectonic evolution of the Tatra Mts (Western Carpathians: constraints from structural, sedimentary, geomorphological, and fission track data

    Directory of Open Access Journals (Sweden)

    Králiková Silvia

    2014-08-01

    Full Text Available The Tatra Mts area, located in the northernmost part of Central Western Carpathians on the border between Slovakia and Poland, underwent a complex Alpine tectonic evolution. This study integrates structural, sedimentary, and geomorphological data combined with fission track data from the Variscan granite rocks to discuss the Cretaceous to Quaternary tectonic and landscape evolution of the Tatra Mts. The presented data can be correlated with five principal tectonic stages (TS, including neotectonics. TS-1 (~95-80 Ma is related to mid-Cretaceous nappe stacking when the Tatric Unit was overlain by Mesozoic sequences of the Fatric and Hronic Nappes. After nappe stacking the Tatric crystalline basement was exhumed (and cooled in response to the Late Cretaceous/Paleogene orogenic collapse followed by orogen-parallel extension. This is supported by 70 to 60 Ma old zircon fission track ages. Extensional tectonics were replaced by transpression to transtension during the Late Paleocene to Eocene (TS-2; ~80-45 Ma. TS-3 (~45-20 Ma is documented by thick Oligocene-lowermost Miocene sediments of the Central Carpathian Paleogene Basin which kept the underlying Tatric crystalline basement at elevated temperatures (ca. > 120 °C and < 200 °C. The TS-4 (~20-7 Ma is linked to slow Miocene exhumation rate of the Tatric crystalline basement, as it is indicated by apatite fission track data of 9-12 Ma. The final shaping of the Tatra Mts has been linked to accelerated tectonic activity since the Pliocene (TS-5; ~7-0 Ma.

  20. Validation of a particle tracking analysis method for the size determination of nano- and microparticles.

    Science.gov (United States)

    Kestens, Vikram; Bozatzidis, Vassili; De Temmerman, Pieter-Jan; Ramaye, Yannic; Roebben, Gert

    2017-01-01

    Particle tracking analysis (PTA) is an emerging technique suitable for size analysis of particles with external dimensions in the nano- and sub-micrometre scale range. Only limited attempts have so far been made to investigate and quantify the performance of the PTA method for particle size analysis. This article presents the results of a validation study during which selected colloidal silica and polystyrene latex reference materials with particle sizes in the range of 20 nm to 200 nm were analysed with NS500 and LM10-HSBF NanoSight instruments and video analysis software NTA 2.3 and NTA 3.0. Key performance characteristics such as working range, linearity, limit of detection, limit of quantification, sensitivity, robustness, precision and trueness were examined according to recommendations proposed by EURACHEM. A model for measurement uncertainty estimation following the principles described in ISO/IEC Guide 98-3 was used for quantifying random and systematic variations. For nominal 50 nm and 100 nm polystyrene and a nominal 80 nm silica reference materials, the relative expanded measurement uncertainties for the three measurands of interest, being the mode, median and arithmetic mean of the number-weighted particle size distribution, varied from about 10% to 12%. For the nominal 50 nm polystyrene material, the relative expanded uncertainty of the arithmetic mean of the particle size distributions increased up to 18% which was due to the presence of agglomerates. Data analysis was performed with software NTA 2.3 and NTA 3.0. The latter showed to be superior in terms of sensitivity and resolution.

  1. Validation of a particle tracking analysis method for the size determination of nano- and microparticles

    Science.gov (United States)

    Kestens, Vikram; Bozatzidis, Vassili; De Temmerman, Pieter-Jan; Ramaye, Yannic; Roebben, Gert

    2017-08-01

    Particle tracking analysis (PTA) is an emerging technique suitable for size analysis of particles with external dimensions in the nano- and sub-micrometre scale range. Only limited attempts have so far been made to investigate and quantify the performance of the PTA method for particle size analysis. This article presents the results of a validation study during which selected colloidal silica and polystyrene latex reference materials with particle sizes in the range of 20 nm to 200 nm were analysed with NS500 and LM10-HSBF NanoSight instruments and video analysis software NTA 2.3 and NTA 3.0. Key performance characteristics such as working range, linearity, limit of detection, limit of quantification, sensitivity, robustness, precision and trueness were examined according to recommendations proposed by EURACHEM. A model for measurement uncertainty estimation following the principles described in ISO/IEC Guide 98-3 was used for quantifying random and systematic variations. For nominal 50 nm and 100 nm polystyrene and a nominal 80 nm silica reference materials, the relative expanded measurement uncertainties for the three measurands of interest, being the mode, median and arithmetic mean of the number-weighted particle size distribution, varied from about 10% to 12%. For the nominal 50 nm polystyrene material, the relative expanded uncertainty of the arithmetic mean of the particle size distributions increased up to 18% which was due to the presence of agglomerates. Data analysis was performed with software NTA 2.3 and NTA 3.0. The latter showed to be superior in terms of sensitivity and resolution.

  2. Automatic tracking and measurement of the motion of blood cells in microvessels based on analysis of multiple spatiotemporal images

    International Nuclear Information System (INIS)

    Chen, Yuan; Liu, Lei; Li, Hongjun; Zhao, Zhimin

    2011-01-01

    Automatic blood cell tracking and velocity measurement in microvessels is a crucial task in biomedical and physiological research. For the analysis of the motion of blood cells in microvessels, a commonly used method for blood cell tracking and velocity estimation is spatiotemporal image-based analysis. However, in the process of the spatiotemporal image generation, a single spatial path is used, i.e. the centreline, which is not suitable for many situations in which cells do not move strictly along the central axis of the microvessel. In this paper, we propose a new method for automatic tracking and measurement of the motion of blood cells in a microvessel based on multiple spatiotemporal images analysis. First, the proposed method adopts three spatial paths (the centreline, inner and outer contour of the microvessel) to generate three spatiotemporal images; then, the traces of blood cells in the spatiotemporal images are extracted and subsequently trace grouping and fusion processes are developed for tracking cell trajectories. For extracting traces in spatiotemporal images, a steerable filter is employed to enhance the traces in raw spatiotemporal images, and then the noise suppression function and orientation-filtering function are designed to extract trace candidates. In the subsequent grouping and fusion process, trace candidates are grouped by the proposed trace grouping rule, and then the trajectories are calculated by the proposed trace fusion approach. The results validate the proposed method for blood cell tracking and the accuracy for blood cell velocity measurement. Moreover, for the larger microvessels, we discuss the criterion of the number selection of the optimal spatial path by using both simulated and real experiments, and it can be used as the criterion for blood cell tracking in microvessels

  3. Atomistic simulation of track formation by energetic recoils in zircon.

    Science.gov (United States)

    Moreira, Pedro A F P; Devanathan, Ram; Weber, William J

    2010-10-06

    We have performed classical molecular dynamics simulations of fission track formation in zircon. We simulated the passage of a swift heavy ion through crystalline zircon using cylindrical thermal spikes with energy deposition (dE/dx) of 2.5-12.8 keV nm( - 1) and a radius of 3 nm. At a low dE/dx of 2.55 keV nm( - 1), the structural damage recovered almost completely and a damage track was not produced. At higher values of dE/dx, tracks were observed and the radius of the track increased with increasing dE/dx. Our structural analysis shows amorphization in the core of the track and phase separation into Si-rich regions near the center of the track and Zr-rich regions near the periphery. These simulations establish a threshold dE/dx for fission track formation in zircon that is relevant to thermochronology and nuclear waste immobilization.

  4. Rate of erosion and exhumation of crystalline rocks in the Hunza Karakoram defined by apatite fission track analysis

    Czech Academy of Sciences Publication Activity Database

    Kořínková, Dagmar; Svojtka, Martin; Kalvoda, J.

    2014-01-01

    Roč. 11, č. 3 (2014), s. 235-253 ISSN 1214-9705 Institutional research plan: CEZ:AV0Z30130516 Institutional support: RVO:67985831 Keywords : apatite fission-track analysis * erosion * exhumation of rocks * Karakoram Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.389, year: 2014

  5. Structural analysis in medical imaging

    International Nuclear Information System (INIS)

    Dellepiane, S.; Serpico, S.B.; Venzano, L.; Vernazza, G.

    1987-01-01

    The conventional techniques in Pattern Recognition (PR) have been greatly improved by the introduction of Artificial Intelligence (AI) approaches, in particular for knowledge representation, inference mechanism and control structure. The purpose of this paper is to describe an image understanding system, based on the integrated approach (AI - PR), developed in the author's Department to interpret Nuclear Magnetic Resonance (NMR) images. The system is characterized by a heterarchical control structure and a blackboard model for the global data-base. The major aspects of the system are pointed out, with particular reference to segmentation, knowledge representation and error recovery (backtracking). The eye slices obtained in the case of two patients have been analyzed and the related results are discussed

  6. Analysis of Kinematics of Flapping Wing UAV Using OptiTrack Systems

    Directory of Open Access Journals (Sweden)

    Matthew Ng Rongfa

    2016-07-01

    Full Text Available An analysis of the kinematics of a flapping membrane wing using experimental kinematic data is presented. This motion capture technique tracks the positon of the retroreflective marker(s placed on the left wing of a 1.3-m-wingspan ornithopter. The time-varying three-dimensional data of the wing kinematics were recorded for a single frequency. The wing shape data was then plotted on a two-dimensional plane to understand the wing dynamic behaviour of an ornithopter. Specifically, the wing tip path, leading edge bending, wing membrane shape, local twist, stroke angle and wing velocity were analyzed. As the three characteristic angles can be expressed in the Fourier series as a function of time, the kinematics of the wing can be computationally generated for the aerodynamic study of flapping flight through the Fourier coefficients presented. Analysis of the ornithopter wing showed how the ornithopter closely mimics the flight motions of birds despite several physical limitations.

  7. Use of eye tracking equipment for human reliability analysis applied to complex system operations

    Energy Technology Data Exchange (ETDEWEB)

    Pinheiro, Andre Ricardo Mendonça; Prado, Eugenio Anselmo Pessoa do; Martins, Marcelo Ramos, E-mail: andrericardopinheiro@usp.br, E-mail: eugenio.prado@labrisco.usp.br, E-mail: mrmatins@usp.br [Universidade de Sao Paulo (LABRISCO/USP), Sao Paulo, SP (Brazil). Lab. de Análise, Avaliação e Gerenciamento de Risco

    2017-07-01

    This article will discuss the preliminary results of an evaluation methodology for the analysis and quantification of manual character errors (human), by monitoring cognitive parameters and skill levels in the operation of a complex control system based on parameters provided by a eye monitoring equipment (Eye Tracker). The research was conducted using a simulator (game) that plays concepts of operation of a nuclear reactor with a split sample for evaluation of aspects of learning, knowledge and standard operating within the context addressed. bridge operators were monitored using the EYE TRACKING, eliminating the presence of the analyst in the evaluation of the operation, allowing the analysis of the results by means of multivariate statistical techniques within the scope of system reliability. The experiments aim to observe state change situations such as stops and scheduled departures, incidents assumptions and common operating characteristics. Preliminary results of this research object indicate that technical and cognitive aspects can contribute to improving the reliability of the available techniques in human reliability, making them more realistic both in the context of quantitative approaches to regulatory and training purposes, as well as reduced incidence of human error. (author)

  8. Novel automated tracking analysis of particles subjected to shear flow: kindlin-3 role in B cells.

    Science.gov (United States)

    Willenbrock, Frances; Zicha, Daniel; Hoppe, Andreas; Hogg, Nancy

    2013-09-03

    Shear flow assays are used to mimic the influence of physiological shear force in diverse situations such as leukocyte rolling and arrest on the vasculature, capture of nanoparticles, and bacterial adhesion. Analysis of such assays usually involves manual counting, is labor-intensive, and is subject to bias. We have developed the Leukotrack program that incorporates a novel (to our knowledge) segmentation routine capable of reliable detection of cells in phase contrast images. The program also automatically tracks rolling cells in addition to those that are more firmly attached and migrating in random directions. We demonstrate its use in the analysis of lymphocyte arrest mediated by one or more active conformations of the integrin LFA-1. Activation of LFA-1 is a multistep process that depends on several proteins including kindlin-3, the protein that is mutated in leukocyte adhesion deficiency-III patients. We find that the very first stage of LFA-1-mediated attaching is unable to proceed in the absence of kindlin-3. Our evidence indicates that kindlin-3-mediated high-affinity LFA-1 controls both the early transient integrin-dependent adhesions in addition to the final stable adhesions made under flow conditions. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

  9. Spectral analysis of a standard test track profile during passage of an agricultural tractor

    Directory of Open Access Journals (Sweden)

    M. Cutini

    2013-09-01

    Full Text Available National statistics on work safety are pointing out a decreasing trend about related injuries and fatalities but an increasing number of reports about professional diseases. In this frame are also considered the mechanical vibrations, in particular whole-body vibrations (WBV. This study aims to reproduce and analyse the vertical displacement of the wheel of an agricultural tractor during the passage on a standard surface (ISO 5008 for defining potential correlations between the surface contour and the effects on vehicle dynamic and driver comfort by analysis of the signals acting under the tractor tires. An agricultural tractor, in four setting conditions and four different forward speeds, was tested on an ISO 5008 standard test track. The accelerations at the hubs of the tractor were acquired and subsequently reproduced on a four hydraulic actuators test bench, at CRA-ING laboratories, Treviglio, Italy. The analysis of the spectrums generated have shown that a roughness surface induces a transformation of the part of energy developed by the forward speed of the vehicle in vertical acceleration that excites the elastic parts (i.e. tires, suspensions. These phenomena seem to indicate that vehicle’s vibration entity is due to the combination of surface roughness and forward speed as amplitude and to the elastic properties of the vehicle as frequency.

  10. Use of eye tracking equipment for human reliability analysis applied to complex system operations

    International Nuclear Information System (INIS)

    Pinheiro, Andre Ricardo Mendonça; Prado, Eugenio Anselmo Pessoa do; Martins, Marcelo Ramos

    2017-01-01

    This article will discuss the preliminary results of an evaluation methodology for the analysis and quantification of manual character errors (human), by monitoring cognitive parameters and skill levels in the operation of a complex control system based on parameters provided by a eye monitoring equipment (Eye Tracker). The research was conducted using a simulator (game) that plays concepts of operation of a nuclear reactor with a split sample for evaluation of aspects of learning, knowledge and standard operating within the context addressed. bridge operators were monitored using the EYE TRACKING, eliminating the presence of the analyst in the evaluation of the operation, allowing the analysis of the results by means of multivariate statistical techniques within the scope of system reliability. The experiments aim to observe state change situations such as stops and scheduled departures, incidents assumptions and common operating characteristics. Preliminary results of this research object indicate that technical and cognitive aspects can contribute to improving the reliability of the available techniques in human reliability, making them more realistic both in the context of quantitative approaches to regulatory and training purposes, as well as reduced incidence of human error. (author)

  11. Momentum analysis by using a quintic spline model for the track

    CERN Document Server

    Wind, H

    1974-01-01

    A method is described to determine the momentum of a particle when the (inhomogeneous) analysing magnetic field and the position of at least three points on the track are known. The model of the field is essentially a cubic spline and that of the track a quintic spline. (8 refs).

  12. AGATA gamma-ray tracking simulations and data analysis working group

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The purpose of this meeting was to review the present state of the AGATA project (Advanced GAmma Tracking Array). The following issues were dealt with: -) detectors and preamplifiers, -) ancillary detectors, -) tracking, -) physics simulations and key experiments, -) in-beam tests, -) data acquisition, -) data processing: front end electronics, and -) infrastructure. This document gathers only the slides of the presentations.

  13. AGATA gamma-ray tracking simulations and data analysis working group

    International Nuclear Information System (INIS)

    2007-01-01

    The purpose of this meeting was to review the present state of the AGATA project (Advanced GAmma Tracking Array). The following issues were dealt with: -) detectors and preamplifiers, -) ancillary detectors, -) tracking, -) physics simulations and key experiments, -) in-beam tests, -) data acquisition, -) data processing: front end electronics, and -) infrastructure. This document gathers only the slides of the presentations

  14. ANALYSIS OF TRACK CIRCUITS WORK AND AUTOMATIC SIGNALING ON PASS SECTION WITH STEEP GRADIENT

    Directory of Open Access Journals (Sweden)

    A. P. Razgonov

    2011-01-01

    Full Text Available Functioning of the track circuits and automatic block system on a pass section with a steep profile has been investigated. The traction calculations, the thermal operating modes of choke transformers, the operating regimes of track circuits with installing two choke transformers on supply and relay ends have been determined.

  15. Structural Analysis of Natural Products

    Czech Academy of Sciences Publication Activity Database

    Přichystal, Jakub; Schug, K. A.; Lemr, Karel; Novák, Jiří; Havlíček, Vladimír

    2016-01-01

    Roč. 88, č. 21 (2016), s. 10338-10346 ISSN 0003-2700 R&D Projects: GA MŠk(CZ) LO1509; GA MŠk(CZ) LH14064; GA ČR(CZ) GA16-20229S Institutional support: RVO:61388971 Keywords : IONIZATION-MASS-SPECTROMETRY * BIOSYNTHETIC GENE CLUSTERS * STRUCTURE ELUCIDATION Subject RIV: EE - Microbiology, Virology Impact factor: 6.320, year: 2016

  16. Reliability analysis and assessment of structural systems

    International Nuclear Information System (INIS)

    Yao, J.T.P.; Anderson, C.A.

    1977-01-01

    The study of structural reliability deals with the probability of having satisfactory performance of the structure under consideration within any specific time period. To pursue this study, it is necessary to apply available knowledge and methodology in structural analysis (including dynamics) and design, behavior of materials and structures, experimental mechanics, and the theory of probability and statistics. In addition, various severe loading phenomena such as strong motion earthquakes and wind storms are important considerations. For three decades now, much work has been done on reliability analysis of structures, and during this past decade, certain so-called 'Level I' reliability-based design codes have been proposed and are in various stages of implementation. These contributions will be critically reviewed and summarized in this paper. Because of the undesirable consequences resulting from the failure of nuclear structures, it is important and desirable to consider the structural reliability in the analysis and design of these structures. Moreover, after these nuclear structures are constructed, it is desirable for engineers to be able to assess the structural reliability periodically as well as immediately following the occurrence of severe loading conditions such as a strong-motion earthquake. During this past decade, increasing use has been made of techniques of system identification in structural engineering. On the basis of non-destructive test results, various methods have been developed to obtain an adequate mathematical model (such as the equations of motion with more realistic parameters) to represent the structural system

  17. Quantification and analysis of ecdysis in the hornworm, Manduca sexta, using machine vision-based tracking.

    Science.gov (United States)

    Shimoide, Alan; Kimball, Ian; Gutierrez, Alba A; Lim, Hendra; Yoon, Ilmi; Birmingham, John T; Singh, Rahul; Fuse, Megumi

    2013-06-01

    We have developed a machine vision-based method for automatically tracking deformations in the body wall to monitor ecdysis behaviors in the hornworm, Manduca sexta. The method utilizes naturally occurring features on the animal's body (spiracles) and is highly accurate (>95 % success in tracking). Moreover, it is robust to unanticipated changes in the animal's position and in lighting, and in the event tracking of specific features is lost, tracking can be reestablished within a few cycles without input from the user. We have paired our tracking technique with electromyography and have also compared our in vivo results to fictive motor patterns recorded from isolated nerve cords. We found no major difference in the cycle periods of contractions during naturally occurring ecdysis compared to ecdysis initiated prematurely through injection of the peptide ecdysis-triggering hormone, and we confirmed that the ecdysis period in vivo is statistically similar to that of the fictive motor pattern.

  18. Track analysis of Oribatid mites (Acari: Oribatida) of the Subantarctic subregion of South America.

    Science.gov (United States)

    Ruiz, Érica V; Romano, Gonzalo M; Morrone, Juan J

    2016-06-23

    We analysed distributional data of 30 species of Oribatid mites of the Subantarctic subregion of southern South America in order to contribute to elucidate their biotic evolution. We constructed individual tracks for the species analysed, based on published and unpublished records. After superposing them we obtained six generalized tracks and five nodes. Four generalized tracks (T2, T3, T4 and T6) extend along and near the Andean ranges, whereas two generalized tracks (T1 and T5) may be artefacts caused by the lack of information. The generalized tracks and nodes show the complex relationships of the austral biota, as hypothesized in previous contributions based on other plant and animal taxa.

  19. Track structure simulation for positron emitters of medical interest. Part I: The case of the allowed decay isotopes

    International Nuclear Information System (INIS)

    Le Loirec, C.; Champion, C.

    2007-01-01

    With the increasing use of positron emission tomography in nuclear medicine, the knowledge and the expertise of β + emitters have improved. However, numerous questions remain still unresolved and it appears today of prime importance to access to a detailed and accurate description of the complete track structure of the most used radio-isotopes in order to determine the damages potentially induced during medical exams in the investigated organs. In this work, we present a detailed inter comparison of the main isotopes used in nuclear medicine namely 18 F, 11 C, 13 N, 15 O, 68 Ga, 82 Rb, 62 Cu, 52 Fe and 44 Sc. To do that, we use a home-made Monte Carlo code developed for positron tracking in water [C. Champion, C. Le Loirec, Phys. Med. Biol. 51 (2006) 1707] and recently adapted for simulating the complete decay of β + radioisotopes in the biological matter, this latter being commonly modelled by liquid water. We also access, for each isotope, to quantitative data such as spatial and energetic (dosimetric) profiles. The results are in a major part given in an analytical way in order to be easily usable and then extrapolated to more complex situations. Furthermore, comparisons to existing experimental and theoretical data exhibit relatively good agreement

  20. High-Resolution Tracking Asymmetric Lithium Insertion and Extraction and Local Structure Ordering in SnS2.

    Science.gov (United States)

    Gao, Peng; Wang, Liping; Zhang, Yu-Yang; Huang, Yuan; Liao, Lei; Sutter, Peter; Liu, Kaihui; Yu, Dapeng; Wang, En-Ge

    2016-09-14

    In the rechargeable lithium ion batteries, the rate capability and energy efficiency are largely governed by the lithium ion transport dynamics and phase transition pathways in electrodes. Real-time and atomic-scale tracking of fully reversible lithium insertion and extraction processes in electrodes, which would ultimately lead to mechanistic understanding of how the electrodes function and why they fail, is highly desirable but very challenging. Here, we track lithium insertion and extraction in the van der Waals interactions dominated SnS2 by in situ high-resolution TEM method. We find that the lithium insertion occurs via a fast two-phase reaction to form expanded and defective LiSnS2, while the lithium extraction initially involves heterogeneous nucleation of intermediate superstructure Li0.5SnS2 domains with a 1-4 nm size. Density functional theory calculations indicate that the Li0.5SnS2 is kinetically favored and structurally stable. The asymmetric reaction pathways may supply enlightening insights into the mechanistic understanding of the underlying electrochemistry in the layered electrode materials and also suggest possible alternatives to the accepted explanation of the origins of voltage hysteresis in the intercalation electrode materials.

  1. A Real-Time Model-Based Human Motion Tracking and Analysis for Human-Computer Interface Systems

    Directory of Open Access Journals (Sweden)

    Chung-Lin Huang

    2004-09-01

    Full Text Available This paper introduces a real-time model-based human motion tracking and analysis method for human computer interface (HCI. This method tracks and analyzes the human motion from two orthogonal views without using any markers. The motion parameters are estimated by pattern matching between the extracted human silhouette and the human model. First, the human silhouette is extracted and then the body definition parameters (BDPs can be obtained. Second, the body animation parameters (BAPs are estimated by a hierarchical tritree overlapping searching algorithm. To verify the performance of our method, we demonstrate different human posture sequences and use hidden Markov model (HMM for posture recognition testing.

  2. A simplified method to track long-term changes in Jupiter's belt/zone structure

    Science.gov (United States)

    Kardasis, E.

    2017-09-01

    Jupiter atmosphere is extremely dynamic, showing a variety of phenomena generally organized in dark belts and bright zones which often change in color, width and latitude. It is not unusual that some disappear or reappear. Long-term changes (e.g annual) in this banded pattern need to be tracked by measuring the latitude of belts and zones and examining their coloring. Digital observations with planetary cameras in recent years have introduced many new ways of exploring the planets. In this work we present a methodology and some results of "Averaged Filtered Observations (AFO)", a simple way to measure the bands edges in order of latitude and view the overall contrast or color of the bands. A series of such AFO over several years would give a good record of the changes in latitude, the darkness/brightness/color of the bands, and their shift through time. This work may trigger average observations of this type by amateurs in different spectral bands and not only in Jupiter.

  3. Structure analysis - chiromancy of the rock

    International Nuclear Information System (INIS)

    Huber, A.; Huber, M.

    1989-01-01

    The reader may initially be surprised by a comparison between structure analysis and palmistry which is, in effect, a comparison between a scientific research method on the one hand and art which is equated with magical powers on the other. In the figurative sense, however, these two fields have some points in common which should help us to obtain a first impression of the nature of geological structure analysis. Chiromancy uses the lines and the form of the hand to predict the character and the future of the person in question. In the same way, geologists use rocks and rock forms to obtain information on structure and behaviour of different formations. Structure analysis is a specialised field of geological investigation in which traces of deformation are interpreted as expressions of rockforming forces. This article discusses how and why the character of a rock formation as well as its past, present and even future behaviour can be determined using structure analysis. (author) 11 figs

  4. Structural study of cold central plant recycling sections at the National Center for Asphalt Technology (NCAT) test track.

    Science.gov (United States)

    2016-01-01

    In 2012, the Virginia Department of Transportation (VDOT) contracted with the National Center for Asphalt Technology (NCAT) to install, instrument, and monitor three pavement test sections at the NCAT Test Track during the 2012-2014 track cycle. The ...

  5. Time-Frequency Analysis of Horizontal Vibration for Vehicle-Track System Based on Hilbert-Huang Transform

    Directory of Open Access Journals (Sweden)

    Zaiwei Li

    2013-01-01

    Full Text Available Relationship between track alignment irregularity and car body horizontal vibration acceleration is analyzed by using Hilbert-Huang Transform (HHT. Actual measured alignment irregularity and car body horizontal vibration acceleration are decomposed by empirical mode decomposition (EMD to obtain intrinsic mode function (IMF. By comparing IMF waveform and energy spectrum of the irregularity and vibration acceleration, there is the definitive correspondence of IMFs, and the adverse section of irregularity can be identified from car body horizontal vibration acceleration. Finally, regression analysis is taken for measured sample of track inspection car on Beijing-Guangzhou line; the quantitative relationship between track alignment irregularity and car body horizontal vibration acceleration is established with a wavelength between 1.5 m and 50 m.

  6. Robustness Analysis of Timber Truss Structure

    DEFF Research Database (Denmark)

    Rajčić, Vlatka; Čizmar, Dean; Kirkegaard, Poul Henning

    2010-01-01

    The present paper discusses robustness of structures in general and the robustness requirements given in the codes. Robustness of timber structures is also an issues as this is closely related to Working group 3 (Robustness of systems) of the COST E55 project. Finally, an example of a robustness...... evaluation of a widespan timber truss structure is presented. This structure was built few years ago near Zagreb and has a span of 45m. Reliability analysis of the main members and the system is conducted and based on this a robustness analysis is preformed....

  7. Structural Analysis Algorithms for Nanomaterials

    DEFF Research Database (Denmark)

    Larsen, Peter Mahler

    -strain interfaces. The stable, low-energy interfaces which are found as a result are intended for use in the design and construction of topological superconductors, which have important applications in quantum computing. Cluster expansion models are used to nd ground-state structures in gold-silver nanoparticles......, which are used in a variety of catalysis processes. In addition to this concrete application, theoretical methods are developed for the optimal construction of cluster expansion models, the exact determination of ground states in a large model, and the exhaustive determination of all possible ground...... states in a small model. Lastly, a method for nearly-optimal sampling of orientations is presented. Whilst this has many applications in science and engineering, the use-case described here is the indexing of diffraction patterns for experimental materials characterization. Signicantly improved sampling...

  8. Computer-aided structure analysis

    International Nuclear Information System (INIS)

    Szalontai, G.; Simon, Z.; Csapo, Z.; Farkas, M.; Pfeifer, Gy.

    1980-01-01

    The results obtained from the computer-aided interpretation of 13 C NMR and IR spectra using the artificial intelligence approach are presented. In its present state the output of the system is a list of functional groups which are resonable candidates for the final structural isomers. The input requires empirical formula, 13 C NMR data (off resonance data also) and IR spectral data. The confirmation of the presence of a functional group is based on comparison of the experimental data with the spectral properties of functional groups stored in a property matrix. If the molecular weight of the compounds studied is less or equal 500, the output contains usually 1.5-2.5 times more groups than really present, in most cases without the loss of the real ones. (author)

  9. Structure of automated system for tracking the formation and burial of radioactive wastes

    International Nuclear Information System (INIS)

    Kozlov, A.A.

    1993-01-01

    Intermediate- and low-activity wastes are formed when radionuclides are used in science, industry, agriculture, and medicine. A centralized system, including territorial specialized complexes and radioactive-waste burial sites (RWBS), has been created for collection, processing, and long-term storage. At this time, however, the records kept of wastes for long-term storage and assessment of their preparation for burial do not come up to current scientific and technical requirements at most RWBSs in Russia. It is necessary, therefore, to create an automated tracking system. Earlier studies, considered the design of a system for monitoring and recording the handling of sources of ionizing radiation, which are the most hazardous part of the wastes. The novel proposed automated system incorporates distinctive functional elements and makes for higher quality waste processing and efficient data exchange. It performs such functions as recording the wastes earmarked for burial, processing, and long-term storage, and where they are stored in the RWBS; ensuring an optimum cycle of collection, transportation, processing, and long-term storage of wastes; recording planned monitored levels of discharges and ejections of substances at the RWBSs; recording the wastes delivered for storage and stored on RWBSs; making calculations, including an estimate of the costs of transport, processing, and storage of wastes for each enterprise, with allowance for penalties; classifying wastes according to processing methods and determining the optimum operating regime and technological facilities; identifying the parameters of wastes delivered for processing and burial; and predicting the deliveries of wastes to RWBSs, planning the construction of new special storage facilities and containers for temporary and long-term storage of wastes

  10. Performance of an image analysis processing system for hen tracking in an environmental preference chamber.

    Science.gov (United States)

    Kashiha, Mohammad Amin; Green, Angela R; Sales, Tatiana Glogerley; Bahr, Claudia; Berckmans, Daniel; Gates, Richard S

    2014-10-01

    Image processing systems have been widely used in monitoring livestock for many applications, including identification, tracking, behavior analysis, occupancy rates, and activity calculations. The primary goal of this work was to quantify image processing performance when monitoring laying hens by comparing length of stay in each compartment as detected by the image processing system with the actual occurrences registered by human observations. In this work, an image processing system was implemented and evaluated for use in an environmental animal preference chamber to detect hen navigation between 4 compartments of the chamber. One camera was installed above each compartment to produce top-view images of the whole compartment. An ellipse-fitting model was applied to captured images to detect whether the hen was present in a compartment. During a choice-test study, mean ± SD success detection rates of 95.9 ± 2.6% were achieved when considering total duration of compartment occupancy. These results suggest that the image processing system is currently suitable for determining the response measures for assessing environmental choices. Moreover, the image processing system offered a comprehensive analysis of occupancy while substantially reducing data processing time compared with the time-intensive alternative of manual video analysis. The above technique was used to monitor ammonia aversion in the chamber. As a preliminary pilot study, different levels of ammonia were applied to different compartments while hens were allowed to navigate between compartments. Using the automated monitor tool to assess occupancy, a negative trend of compartment occupancy with ammonia level was revealed, though further examination is needed. ©2014 Poultry Science Association Inc.

  11. Feature-tracking myocardial strain analysis in acute myocarditis. Diagnostic value and association with myocardial oedema

    Energy Technology Data Exchange (ETDEWEB)

    Luetkens, Julian A.; Schlesinger-Irsch, Ulrike; Kuetting, Daniel L.; Dabir, Darius; Homsi, Rami; Schmeel, Frederic C.; Sprinkart, Alois M.; Naehle, Claas P.; Schild, Hans H.; Thomas, Daniel [University of Bonn, Department of Radiology, Bonn (Germany); Doerner, Jonas [University Hospital Cologne, Department of Radiology, Cologne (Germany); Fimmers, Rolf [University of Bonn, Department of Medical Biometry, Informatics, and Epidemiology, Bonn (Germany)

    2017-11-15

    To investigate the diagnostic value of cardiac magnetic resonance (CMR) feature-tracking (FT) myocardial strain analysis in patients with suspected acute myocarditis and its association with myocardial oedema. Forty-eight patients with suspected acute myocarditis and 35 control subjects underwent CMR. FT CMR analysis of systolic longitudinal (LS), circumferential (CS) and radial strain (RS) was performed. Additionally, the protocol allowed for the assessment of T1 and T2 relaxation times. When compared with healthy controls, myocarditis patients demonstrated reduced LS, CS and RS values (LS: -19.5 ± 4.4% vs. -23.6 ± 3.1%, CS: -23.0 ± 5.8% vs. -27.4 ± 3.4%, RS: 28.9 ± 8.5% vs. 32.4 ± 7.4%; P < 0.05, respectively). LS (T1: r = 0.462, P < 0.001; T2: r = 0.436, P < 0.001) and CS (T1: r = 0.429, P < 0.001; T2: r = 0.467, P < 0.001) showed the strongest correlations with T1 and T2 relaxations times. Area under the curve of LS (0.79) was higher compared with those of CS (0.75; P = 0.478) and RS (0.62; P = 0.008). FT CMR myocardial strain analysis might serve as a new tool for assessment of myocardial dysfunction in the diagnostic work-up of patients suspected of having acute myocarditis. Especially, LS and CS show a sufficient diagnostic performance and were most closely correlated with CMR parameters of myocardial oedema. (orig.)

  12. Structural analysis of fuel handling systems

    International Nuclear Information System (INIS)

    Lee, L.S.S.

    1996-01-01

    The purpose of this paper has three aspects: (i) to review 'why' and 'what' types of structural analysis, testing and report are required for the fuel handling systems according to the codes, or needed for design of a product, (ii) to review the input requirements for analysis and the analysis procedures, and (iii) to improve the communication between the analysis and other elements of the product cycle. The required or needed types of analysis and report may be categorized into three major groups: (i) Certified Stress Reports for design by analysis, (ii) Design Reports not required for certification and registration, but are still required by codes, and (iii) Design Calculations required by codes or needed for design. Input requirements for structural analysis include: design, code classification, loadings, and jurisdictionary boundary. Examples of structural analysis for the fueling machine head and support structure are given. For improving communication between the structural analysis and the other elements of the product cycle, some areas in the specification of design requirements and load rating are discussed. (author). 6 refs., 1 tab., 4 figs

  13. Image processing analysis of nuclear track parameters for CR-39 detector irradiated by thermal neutron

    Energy Technology Data Exchange (ETDEWEB)

    Al-Jobouri, Hussain A., E-mail: hahmed54@gmail.com; Rajab, Mustafa Y., E-mail: mostafaheete@gmail.com [Department of Physics, College of Science, AL-Nahrain University, Baghdad (Iraq)

    2016-03-25

    CR-39 detector which covered with boric acid (H{sub 3}Bo{sub 3}) pellet was irradiated by thermal neutrons from ({sup 241}Am - {sup 9}Be) source with activity 12Ci and neutron flux 10{sup 5} n. cm{sup −2}. s{sup −1}. The irradiation times -T{sub D} for detector were 4h, 8h, 16h and 24h. Chemical etching solution for detector was sodium hydroxide NaOH, 6.25N with 45 min etching time and 60 C° temperature. Images of CR-39 detector after chemical etching were taken from digital camera which connected from optical microscope. MATLAB software version 7.0 was used to image processing. The outputs of image processing of MATLAB software were analyzed and found the following relationships: (a) The irradiation time -T{sub D} has behavior linear relationships with following nuclear track parameters: i) total track number - N{sub T} ii) maximum track number - MRD (relative to track diameter - D{sub T}) at response region range 2.5 µm to 4 µm iii) maximum track number - M{sub D} (without depending on track diameter - D{sub T}). (b) The irradiation time -T{sub D} has behavior logarithmic relationship with maximum track number - M{sub A} (without depending on track area - A{sub T}). The image processing technique principally track diameter - D{sub T} can be take into account to classification of α-particle emitters, In addition to the contribution of these technique in preparation of nano- filters and nano-membrane in nanotechnology fields.

  14. NAPS: Network Analysis of Protein Structures

    Science.gov (United States)

    Chakrabarty, Broto; Parekh, Nita

    2016-01-01

    Traditionally, protein structures have been analysed by the secondary structure architecture and fold arrangement. An alternative approach that has shown promise is modelling proteins as a network of non-covalent interactions between amino acid residues. The network representation of proteins provide a systems approach to topological analysis of complex three-dimensional structures irrespective of secondary structure and fold type and provide insights into structure-function relationship. We have developed a web server for network based analysis of protein structures, NAPS, that facilitates quantitative and qualitative (visual) analysis of residue–residue interactions in: single chains, protein complex, modelled protein structures and trajectories (e.g. from molecular dynamics simulations). The user can specify atom type for network construction, distance range (in Å) and minimal amino acid separation along the sequence. NAPS provides users selection of node(s) and its neighbourhood based on centrality measures, physicochemical properties of amino acids or cluster of well-connected residues (k-cliques) for further analysis. Visual analysis of interacting domains and protein chains, and shortest path lengths between pair of residues are additional features that aid in functional analysis. NAPS support various analyses and visualization views for identifying functional residues, provide insight into mechanisms of protein folding, domain-domain and protein–protein interactions for understanding communication within and between proteins. URL:http://bioinf.iiit.ac.in/NAPS/. PMID:27151201

  15. Structural Dynamics and Data Analysis

    Science.gov (United States)

    Luthman, Briana L.

    2013-01-01

    This project consists of two parts, the first will be the post-flight analysis of data from a Delta IV launch vehicle, and the second will be a Finite Element Analysis of a CubeSat. Shock and vibration data was collected on WGS-5 (Wideband Global SATCOM- 5) which was launched on a Delta IV launch vehicle. Using CAM (CAlculation with Matrices) software, the data is to be plotted into Time History, Shock Response Spectrum, and SPL (Sound Pressure Level) curves. In this format the data is to be reviewed and compared to flight instrumentation data from previous flights of the same launch vehicle. This is done to ensure the current mission environments, such as shock, random vibration, and acoustics, are not out of family with existing flight experience. In family means the peaks on the SRS curve for WGS-5 are similar to the peaks from the previous flights and there are no major outliers. The curves from the data will then be compiled into a useful format so that is can be peer reviewed then presented before an engineering review board if required. Also, the reviewed data will be uploaded to the Engineering Review Board Information System (ERBIS) to archive. The second part of this project is conducting Finite Element Analysis of a CubeSat. In 2010, Merritt Island High School partnered with NASA to design, build and launch a CubeSat. The team is now called StangSat in honor of their mascot, the mustang. Over the past few years, the StangSat team has built a satellite and has now been manifested for flight on a SpaceX Falcon 9 launch in 2014. To prepare for the final launch, a test flight was conducted in Mojave, California. StangSat was launched on a Prospector 18D, a high altitude rocket made by Garvey Spacecraft Corporation, along with their sister satellite CP9 built by California Polytechnic University. However, StangSat was damaged during an off nominal landing and this project will give beneficial insights into what loads the CubeSat experienced during the crash

  16. Beyond trend analysis: How a modified breakpoint analysis enhances knowledge of agricultural production after Zimbabwe's fast track land reform

    Science.gov (United States)

    Hentze, Konrad; Thonfeld, Frank; Menz, Gunter

    2017-10-01

    In the discourse on land reform assessments, a significant lack of spatial and time-series data has been identified, especially with respect to Zimbabwe's ;Fast-Track Land Reform Programme; (FTLRP). At the same time, interest persists among land use change scientists to evaluate causes of land use change and therefore to increase the explanatory power of remote sensing products. This study recognizes these demands and aims to provide input on both levels: Evaluating the potential of satellite remote sensing time-series to answer questions which evolved after intensive land redistribution efforts in Zimbabwe; and investigating how time-series analysis of Normalized Difference Vegetation Index (NDVI) can be enhanced to provide information on land reform induced land use change. To achieve this, two time-series methods are applied to MODIS NDVI data: Seasonal Trend Analysis (STA) and Breakpoint Analysis for Additive Season and Trend (BFAST). In our first analysis, a link of agricultural productivity trends to different land tenure regimes shows that regional clustering of trends is more dominant than a relationship between tenure and trend with a slightly negative slope for all regimes. We demonstrate that clusters of strong negative and positive productivity trends are results of changing irrigation patterns. To locate emerging and fallow irrigation schemes in semi-arid Zimbabwe, a new multi-method approach is developed which allows to map changes from bimodal seasonal phenological patterns to unimodal and vice versa. With an enhanced breakpoint analysis through the combination of STA and BFAST, we are able to provide a technique that can be applied on large scale to map status and development of highly productive cropping systems, which are key for food production, national export and local employment. We therefore conclude that the combination of existing and accessible time-series analysis methods: is able to achieve both: overcoming demonstrated limitations of

  17. Predicting and understanding Korean high school students' science-track choice: Testing the theory of reasoned action by structural equation modeling

    Science.gov (United States)

    Myeong, Jeon-Ok; Crawley, Frank E.

    The theory of reasoned action (Ajzen & Fishbein, 1980; Fishbein & Ajzen, 1975) was used to predict and understand Korean high school students' track choice for college entrance. First-year high school students (N = 665) from four representative regions of Korea participated in the study. The survey instruments were questionnaires developed according to the guidelines of the TRA. The target behavior of interest in this study was Korean students' choice of the science track when they completed the track application forms during the first year of high school. Predictors included TRA model and external variables. Multiple regression and the structural equation modeling with LISREL (Jöreskog & Sörbom, 1986) were used to analyze the data. The TRA was found to be applicable for understanding and predicting track choice, with minor modifications. Subjective norm was found to exert a direct influence on personal beliefs and the target behavior.

  18. Dynamic analysis and design of offshore structures

    CERN Document Server

    Chandrasekaran, Srinivasan

    2015-01-01

    This book  attempts to provide readers with an overall idea of various types of offshore platform geometries. It covers the various environmental loads encountered by these structures, a detailed description of the fundamentals of structural dynamics in a class-room style, estimate of damping in offshore structures and their applications in the preliminary analysis and design. Basic concepts of structural dynamics are emphasized through simple illustrative examples and exercises. Design methodologies and guidelines, which are FORM based concepts are explained through a few applied example structures. Each chapter also has tutorials and exercises for self-learning. A dedicated chapter on stochastic dynamics will help the students to extend the basic concepts of structural dynamics to this advanced domain of research. Hydrodynamic response of offshore structures with perforated members is one of the recent research applications, which is found to be one of the effective manner of retrofitting offshore structur...

  19. Cluster analysis for the probability of DSB site induced by electron tracks

    Energy Technology Data Exchange (ETDEWEB)

    Yoshii, Y. [Biological Research, Education and Instrumentation Center, Sapporo Medical University, Sapporo 060-8556 (Japan); Graduate School of Health Sciences, Hokkaido University, Sapporo 060-0812 (Japan); Sasaki, K. [Faculty of Health Sciences, Hokkaido University of Science, Sapporo 006-8585 (Japan); Matsuya, Y. [Graduate School of Health Sciences, Hokkaido University, Sapporo 060-0812 (Japan); Date, H., E-mail: date@hs.hokudai.ac.jp [Faculty of Health Sciences, Hokkaido University, Sapporo 060-0812 (Japan)

    2015-05-01

    To clarify the influence of bio-cells exposed to ionizing radiations, the densely populated pattern of the ionization in the cell nucleus is of importance because it governs the extent of DNA damage which may lead to cell lethality. In this study, we have conducted a cluster analysis of ionization and excitation events to estimate the number of double-strand breaks (DSBs) induced by electron tracks. A Monte Carlo simulation for electrons in liquid water was performed to determine the spatial location of the ionization and excitation events. The events were divided into clusters by using the density-based spatial clustering of applications with noise (DBSCAN) algorithm. The algorithm enables us to sort out the events into the groups (clusters) in which a minimum number of neighboring events are contained within a given radius. For evaluating the number of DSBs in the extracted clusters, we have introduced an aggregation index (AI). The computational results show that a sub-keV electron produces DSBs in a dense formation more effectively than higher energy electrons. The root-mean square radius (RMSR) of the cluster size is below 5 nm, which is smaller than the chromatin fiber thickness. It was found that this size of clustering events has a high possibility to cause lesions in DNA within the chromatin fiber site.

  20. Structure mapping for improved situational awareness, missions planning, and operator tracking

    Science.gov (United States)

    Williams, Jonathan; Reese, Matt; Calcutt, Wade; Morrison, James; Roehrich, Gregory J.

    2010-04-01

    McQ developed for the U.S. Army Armament Research, Development and Engineering Center (ARDEC) an acoustic and infrared measurement, node localization, and building characterization prototype system. The system is designed for both manned and unmanned use to develop greater situational awareness through the exploration of unknown structures and relay of mapping data through ARDEC's Firestorm network. This research covers ultrasonic and infrared ranging sensor performance, GPS-denied positioning solutions, sensor data fusion, and mapping algorithms. Applications of McQ's Structure Mapping system also include first responder mapping and positioning. McQ will present development methodology and performance.

  1. Semantic Antinomies and Deep Structure Analysis

    Science.gov (United States)

    Zuber, Ryszard

    1975-01-01

    This article discusses constructions known as semantic antinomies, that is, the paradoxical results of false presuppositions, and how they can be dealt with by means of deep structure analysis. See FL 508 186 for availability. (CLK)

  2. Comprehensive risk analysis for structure type selection.

    Science.gov (United States)

    2010-04-01

    Optimization of bridge selection and design traditionally has been sought in terms of the finished structure. This study presents a : more comprehensive risk-based analysis that includes user costs and accidents during the construction phase. Costs f...

  3. Comparative investigation into Viterbi based and multiple hypothesis based track stitching

    CSIR Research Space (South Africa)

    Van der Merwe, LJ

    2016-12-01

    Full Text Available In this study a comparative analysis is performed between a novel Viterbi based and multiple hypothesis based track stitching algorithms. The track fragments in the Viterbi based track stitching algorithm are modelled as nodes in a trellis structure...

  4. A Cross Structured Light Sensor and Stripe Segmentation Method for Visual Tracking of a Wall Climbing Robot

    Science.gov (United States)

    Zhang, Liguo; Sun, Jianguo; Yin, Guisheng; Zhao, Jing; Han, Qilong

    2015-01-01

    In non-destructive testing (NDT) of metal welds, weld line tracking is usually performed outdoors, where the structured light sources are always disturbed by various noises, such as sunlight, shadows, and reflections from the weld line surface. In this paper, we design a cross structured light (CSL) to detect the weld line and propose a robust laser stripe segmentation algorithm to overcome the noises in structured light images. An adaptive monochromatic space is applied to preprocess the image with ambient noises. In the monochromatic image, the laser stripe obtained is recovered as a multichannel signal by minimum entropy deconvolution. Lastly, the stripe centre points are extracted from the image. In experiments, the CSL sensor and the proposed algorithm are applied to guide a wall climbing robot inspecting the weld line of a wind power tower. The experimental results show that the CSL sensor can capture the 3D information of the welds with high accuracy, and the proposed algorithm contributes to the weld line inspection and the robot navigation. PMID:26110403

  5. Tracking truck flows with programmable mobile devices for drayage efficiency analysis: [research brief].

    Science.gov (United States)

    2016-05-01

    The purpose of this project is to design and experiment on a technology to track, organize, : extract and analyze data on port drayage activities from which a clear understanding of drayage : efficiency can be gained. Drayage efficiency may point to ...

  6. Using rhetorical structure in sentiment analysis

    NARCIS (Netherlands)

    Hogenboom, Alexander; Frasincar, Flavius; de Jong, Franciska M.G.; Kaymak, Uzay

    Automated sentiment analysis has become an active field of study with a broad applicability. One of the key open research issues lies in dealing with structural aspects of text when analyzing its conveyed sentiment. Recent work uses structural aspects of text in order to distinguish important text

  7. Synthesis, crystal structure, thermal analysis and dielectric ...

    Indian Academy of Sciences (India)

    In both the materials, the crystal structure has been determined by X-ray single crystal analysis at room temperature (293 K). The compound structures consist of K + (or NH 4 + ) cations and double chains of CdCl 6 octahedra sharing one edge extending along b -axis. The mixture of KA + /NH 4 + cations are located ...

  8. Fourier Analysis Of Vibrations Of Round Structures

    Science.gov (United States)

    Davis, Gary A.

    1990-01-01

    Fourier-series representation developed for analysis of vibrations in complicated, round structures like turbopump impellers. Method eliminates guesswork involved in characterization of shapes of vibrational modes. Easy way to characterize complicated modes, leading to determination of responsiveness of given mode to various forcing functions. Used in conjunction with finite-element numerical simulation of vibrational modes of structure.

  9. Rhetorical Structure Theory and Text Analysis

    Science.gov (United States)

    1989-11-01

    NO. NO. ACCESSION NO. 11. TITLE (include Security Clasification ) Rhetorical Structure Theory and Text Analysis (Unclassified) 12. PERSONAL AUTHOR(S...34Antithesis: A Study in Clause Combining and Discourse Structure ," in Ross Steele and Terry Threadgold (eds.), Language Topics: Essays in Honour of M

  10. Crystallographic Analysis and Structural Revision of a ...

    African Journals Online (AJOL)

    ABSTRACT. Single crystal X-ray analysis of a spiroterpenoid rearrangement product has revealed that its structure is, in fact, isomeric with the structure proposed previously – an observation that has significant mechanistic implications. KEYWORDS. Spiroterpenoid, rearrangement, X-ray crystallography, camphor derivative.

  11. Crystallographic Analysis and Structural Revision of a ...

    African Journals Online (AJOL)

    Single crystal X-ray analysis of a spiroterpenoid rearrangement product has revealed that its structure is, in fact, isomeric with the structure proposed previously – an observation that has significant mechanistic implications. Keywords: Spiroterpenoid, rearrangement, X-ray crystallography, camphor derivative.

  12. Covariance Structure Analysis: Seduced by Sophistication?

    Science.gov (United States)

    Wampold, Bruce E.

    1987-01-01

    Comments on Kerwin et al.'s article on covariance structure analysis (LISREL). Cautions that much effort must be made in developing the theory that describes the relationships among constructs and in establishing the measurement of these constructs before covariance structure is used. (ABB)

  13. Genome-wide Association Analysis Tracks Bacterial Leaf Blight Resistance Loci In Rice Diverse Germplasm.

    Science.gov (United States)

    Dilla-Ermita, Christine Jade; Tandayu, Erwin; Juanillas, Venice Margarette; Detras, Jeffrey; Lozada, Dennis Nicuh; Dwiyanti, Maria Stefanie; Vera Cruz, Casiana; Mbanjo, Edwige Gaby Nkouaya; Ardales, Edna; Diaz, Maria Genaleen; Mendioro, Merlyn; Thomson, Michael J; Kretzschmar, Tobias

    2017-12-01

    A range of resistance loci against different races of Xanthomonas oryzae pv. oryzae (Xoo), the pathogen causing bacterial blight (BB) disease of rice, have been discovered and characterized. Several have been deployed in modern varieties, however, due to rapid evolution of Xoo, a number have already become ineffective. The continuous "arms race" between Xoo and rice makes it imperative to discover new resistance loci to enable durable deployment of multiple resistance genes in modern breeding lines. Rice diversity panels can be exploited as reservoirs of useful genetic variation for bacterial blight (BB) resistance. This study was conducted to identify loci associated to BB resistance, new genetic donors and useful molecular markers for marker-assisted breeding. A genome-wide association study (GWAS) of BB resistance using a diverse panel of 285 rice accessions was performed to identify loci that are associated with resistance to nine Xoo strains from the Philippines, representative of eight global races. Single nucleotide polymorphisms (SNPs) associated with differential resistance were identified in the diverse panel and a subset of 198 indica accessions. Strong associations were found for novel SNPs linked with known bacterial blight resistance Xa genes, from which high utility markers for tracking and selection of resistance genes in breeding programs were designed. Furthermore, significant associations of SNPs in chromosomes 6, 9, 11, and 12 did not overlap with known resistance loci and hence might prove to be novel sources of resistance. Detailed analysis revealed haplotypes that correlated with resistance and analysis of putative resistance alleles identified resistant genotypes as potential donors of new resistance genes. The results of the GWAS validated known genes underlying resistance and identified novel loci that provide useful targets for further investigation. SNP markers and genetic donors identified in this study will help plant breeders in

  14. Size and concentration analyses of extracellular vesicles by nanoparticle tracking analysis: a variation study

    Science.gov (United States)

    Vestad, Beate; Llorente, Alicia; Neurauter, Axl; Phuyal, Santosh; Kierulf, Bente; Kierulf, Peter; Skotland, Tore; Sandvig, Kirsten; Haug, Kari Bente F.; Øvstebø, Reidun

    2017-01-01

    ABSTRACT Current methods for characterisation of extracellular vesicles (EVs) need further standardisation in order to obtain an acceptable level of data comparability. Size and concentration of EVs can be determined by nanoparticle tracking analysis (NTA). However, both the heterogeneity of EVs and the choice of instrument settings may cause an appreciable analytical variation. Intra-assay (within-day, n = 6) and inter-assay (day-to-day, n = 6) variations (coefficient of variation, % CV) of different preparations of EVs and artificial vesicles or beads were determined using two NanoSight NS500 instruments, located at different laboratories. All analyses were performed by the same operator. The effect of applying identical software settings or instrument-optimised settings for each sample type and instrument was also evaluated. Finally, the impact of different operators and the use of two different software versions were investigated. The intra-assay CVs were 1–12% for both EVs and artificial samples, measured on the same instrument. The overall day-to-day variation was similar for both instruments, ranging from 2% to 25%. However, significantly different results were observed between the two instruments using identical software settings. The effect of applying instrument-optimised settings reduced the mismatch between the instruments, resulting in little to no significant divergences. The impact of using different operators and software versions when analysing silica microspheres and microvesicles from monocytes using instrument-optimised settings on the same instrument did not contribute to significant variation compared to the overall day-to-day variation of one operator. Performance differences between two similar NTA instruments may display significant divergences in size and concentration measurements when analysing EVs, depending on applied instrument settings and technical conditions. The importance of developing a streamlined and standardised

  15. Size and concentration analyses of extracellular vesicles by nanoparticle tracking analysis: a variation study.

    Science.gov (United States)

    Vestad, Beate; Llorente, Alicia; Neurauter, Axl; Phuyal, Santosh; Kierulf, Bente; Kierulf, Peter; Skotland, Tore; Sandvig, Kirsten; Haug, Kari Bente F; Øvstebø, Reidun

    2017-01-01

    Current methods for characterisation of extracellular vesicles (EVs) need further standardisation in order to obtain an acceptable level of data comparability. Size and concentration of EVs can be determined by nanoparticle tracking analysis (NTA). However, both the heterogeneity of EVs and the choice of instrument settings may cause an appreciable analytical variation. Intra-assay (within-day, n  = 6) and inter-assay (day-to-day, n  = 6) variations (coefficient of variation, % CV) of different preparations of EVs and artificial vesicles or beads were determined using two NanoSight NS500 instruments, located at different laboratories. All analyses were performed by the same operator. The effect of applying identical software settings or instrument-optimised settings for each sample type and instrument was also evaluated. Finally, the impact of different operators and the use of two different software versions were investigated. The intra-assay CVs were 1-12% for both EVs and artificial samples, measured on the same instrument. The overall day-to-day variation was similar for both instruments, ranging from 2% to 25%. However, significantly different results were observed between the two instruments using identical software settings. The effect of applying instrument-optimised settings reduced the mismatch between the instruments, resulting in little to no significant divergences. The impact of using different operators and software versions when analysing silica microspheres and microvesicles from monocytes using instrument-optimised settings on the same instrument did not contribute to significant variation compared to the overall day-to-day variation of one operator. Performance differences between two similar NTA instruments may display significant divergences in size and concentration measurements when analysing EVs, depending on applied instrument settings and technical conditions. The importance of developing a streamlined and standardised execution of

  16. Reliability analysis of high-speed tracked vehicles in the polish army

    Directory of Open Access Journals (Sweden)

    Kończak Jarosław

    2017-06-01

    Full Text Available The Polish Armed Forces use tracked vehicles that serve as a core element of the ground combat forces. These vehicles are capable of fighting in all kinds of terrain conditions, in any season of the year. Combat missions are often fought in areas where even no dirt roads are available. The present paper assesses the reliability of tracked vehicles in the context of their irregular operation, as well as service- and maintenance-related vulnerability.

  17. Computational structural analysis and finite element methods

    CERN Document Server

    Kaveh, A

    2014-01-01

    Graph theory gained initial prominence in science and engineering through its strong links with matrix algebra and computer science. Moreover, the structure of the mathematics is well suited to that of engineering problems in analysis and design. The methods of analysis in this book employ matrix algebra, graph theory and meta-heuristic algorithms, which are ideally suited for modern computational mechanics. Efficient methods are presented that lead to highly sparse and banded structural matrices. The main features of the book include: application of graph theory for efficient analysis; extension of the force method to finite element analysis; application of meta-heuristic algorithms to ordering and decomposition (sparse matrix technology); efficient use of symmetry and regularity in the force method; and simultaneous analysis and design of structures.

  18. A 3D fast algorithm for computing Lagrangian coherent structures via ridge tracking

    OpenAIRE

    Lipinski, Doug; Mohseni, Kamran

    2012-01-01

    Lagrangian coherent structures (LCS) in fluid flows appear as co-dimension one ridges of the finite time Lyapunov exponent (FTLE) field. In three- dimensions this means two-dimensional ridges. A fast algorithm is presented here to locate and extract such ridge surfaces while avoiding unnecessary computations away from the LCS. This algorithm reduces the order of the computational complexity from O(1/dx^3) to about O(1/dx^2) by eliminating computations over most of the three dimensional domain...

  19. The dawn of Structural One Health: a new science tracking disease emergence along circuits of capital.

    Science.gov (United States)

    Wallace, Robert G; Bergmann, Luke; Kock, Richard; Gilbert, Marius; Hogerwerf, Lenny; Wallace, Rodrick; Holmberg, Mollie

    2015-03-01

    The One Health approach integrates health investigations across the tree of life, including, but not limited to, wildlife, livestock, crops, and humans. It redresses an epistemological alienation at the heart of much modern population health, which has long segregated studies by species. Up to this point, however, One Health research has also omitted addressing fundamental structural causes underlying collapsing health ecologies. In this critical review we unpack the relationship between One Health science and its political economy, particularly the conceptual and methodological trajectories by which it fails to incorporate social determinants of epizootic spillover. We also introduce a Structural One Health that addresses the research gap. The new science, open to incorporating developments across the social sciences, addresses foundational processes underlying multispecies health, including the place-specific deep-time histories, cultural infrastructure, and economic geographies driving disease emergence. We introduce an ongoing project on avian influenza to illustrate Structural One Health's scope and ambition. For the first time researchers are quantifying the relationships among transnational circuits of capital, associated shifts in agroecological landscapes, and the genetic evolution and spatial spread of a xenospecific pathogen. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Predictability of steel containment response near failure track 3 - structural integrity, dynamic behavior, and seismic design

    International Nuclear Information System (INIS)

    Costello, J.F.; Ludwigsen, J.S.; Luk, V.K.; Hessheimer, M.F.

    2000-01-01

    The Nuclear Power Engineering Corporation of Japan and the US Nuclear Regulatory Commission Office of Nuclear Regulatory Research, are co-sponsoring and jointly funding a Cooperative Containment Research Program at Sandia National Laboratories, Albuquerque, New Mexico, USA. As a part of this program, a steel containment vessel model and contact structure assembly was tested to failure with over pressurization at Sandia on December 11--12, 1996. The steel containment vessel model was a mixed-scale model (1:10 in geometry and 1:4 in shell thickness) of a steel containment for an improved Mark-II Boiling Water Reactor plant in Japan. The contact structure, which is a thick, bell-shaped steel shell separated at a nominally uniform distance from the model, provides a simplified representation of features of the concrete reactor shield building in the actual plant. The objective of the internal pressurization test was to provide measurement data of the structural response of the model up to its failure in order to validate analytical modeling, to find its pressure capacity, and to observe the failure model and mechanisms

  1. Choosing the geodetic network for a system for tracking deformations of circular engineering structures

    International Nuclear Information System (INIS)

    Bokov, M.A.; Pupkov, Yu.A.

    This paper examines and evaluates three possible versions of networks for circular structures (curvilinear structures in the general case), for which attention is focused on the accuracy of the positioning of reference points with respect to a specified production axis along the normal to the axis. A significant difference in the tolerances in two mutually perpendicular directions often obtains in setting up the production equipment of flow lines, accelerators and their storage rings, radiotelescope antennas, and others. Observance of one of the tolerances is ensured by the stability of the structure, while observance of the other, more stringent tolerance must be monitored through measurements. A comparison of the alternative networks was made on the basis of three main indices: (a) the rms errors in determining the position of points with respect to the production axis; (b) the correlation coefficients of the errors for the weakest point in the network and for all other points; (c) the rms amplitudes of the Fourier harmonics that characterize the smoothness of the curve obtained and the presence of hidden periodicities as a function of the residual errors

  2. Tracking soil structural changes during root growth with sequential X-Ray CT scanning

    Science.gov (United States)

    Schmidt, Sonja; Bengough, Glyn; Hallett, Paul

    2014-05-01

    Crop productivity is highly dependent on a good supply of water and nutrients. With increasing demand for food and variable water regimes due to climate change, it is important to get a better understanding on the processes involved in water and nutrient uptake by roots. Changes in soil structure affect water and nutrient availabilities for plants. It is known that roots change their environment during growth but little is known on how soil structural properties change as roots penetrate soils. More detailed information on root growth induced changes in the rhizosphere will help us to model water and nutrient uptake by plants. The objective of this study was to measure directly how soil structure changes in close proximity to the root as a seedling root penetrates through the soil. 3D volumetric images of maize root growth during six hours were obtained using X-ray microtomography at a resolution of 21 μm. Roots were grown in soils of two different compaction levels (50 kPa and 200 kPa uniaxial load) and matric potentials (10 kPa and 100 kPa). Changes in porosity, pore connectivity and root-soil contact were determined from 2D cross sections for each time step. The 2D cross sections were chosen at 4 different positions in the sample, and each section was divided into sections of 64 voxels (1.3 mm2) to determine changes in porosity and connectivity with distance from the root. Soil movement caused by root growth was quantified from 2D cross sections at different positions along the sample using Particle image velocimetry (PIV). Changes in soil structure during root growth were observed. Porosity in close proximity to the root decreased whereas root-soil contact increased with time. The PIV showed a radial deformation of the soil. Greatest deformation was found close to the root. Some aggregates fractured during root growth whereas others were pushed into the pore space. These data on the changes in soil structure will help us to predict water and nutrient

  3. Structural Analysis in a Conceptual Design Framework

    Science.gov (United States)

    Padula, Sharon L.; Robinson, Jay H.; Eldred, Lloyd B.

    2012-01-01

    Supersonic aircraft designers must shape the outer mold line of the aircraft to improve multiple objectives, such as mission performance, cruise efficiency, and sonic-boom signatures. Conceptual designers have demonstrated an ability to assess these objectives for a large number of candidate designs. Other critical objectives and constraints, such as weight, fuel volume, aeroelastic effects, and structural soundness, are more difficult to address during the conceptual design process. The present research adds both static structural analysis and sizing to an existing conceptual design framework. The ultimate goal is to include structural analysis in the multidisciplinary optimization of a supersonic aircraft. Progress towards that goal is discussed and demonstrated.

  4. Nonlinear structural analysis using integrated force method

    Indian Academy of Sciences (India)

    During the formulative period of structural analysis by matrix methods, earnest research was directed to automate the force ... (1973) for the analysis of discrete and continuous systems. IFM is a force method of .... (Nagabhushanam & Patnaik 1989) are being developed, which helps the use of efficient solution techniques for ...

  5. Impact analysis of composite aircraft structures

    Science.gov (United States)

    Pifko, Allan B.; Kushner, Alan S.

    1993-01-01

    The impact analysis of composite aircraft structures is discussed. Topics discussed include: background remarks on aircraft crashworthiness; comments on modeling strategies for crashworthiness simulation; initial study of simulation of progressive failure of an aircraft component constructed of composite material; and research direction in composite characterization for impact analysis.

  6. Structural Vibration Monitoring Using Cumulative Spectral Analysis

    Directory of Open Access Journals (Sweden)

    Satoru Goto

    2013-01-01

    Full Text Available This paper describes a resonance decay estimation for structural health monitoring in the presence of nonstationary vibrations. In structural health monitoring, the structure's frequency response and resonant decay characteristics are very important for understanding how the structure changes. Cumulative spectral analysis (CSA estimates the frequency decay by using the impulse response. However, measuring the impulse response of buildings is impractical due to the need to shake the building itself. In a previous study, we reported on system damping monitoring using cumulative harmonic analysis (CHA, which is based on CSA. The current study describes scale model experiments on estimating the hidden resonance decay under non-stationary noise conditions by using CSA for structural condition monitoring.

  7. Does sound structure affect word learning? An eye-tracking study of Danish learning toddlers

    DEFF Research Database (Denmark)

    Trecca, Fabio; Bleses, Dorthe; Madsen, Thomas O.

    2018-01-01

    Previous research has shown that Danish-learning children lag behind in early lexical acquisition compared with children learning a number of other languages. This delay has been ascribed to the opaque phonetic structure of Danish, which appears to have fewer reliable segmentation cues than other...... by the phonetic opacity of the speech stimuli. We suggest that this finding results from the interplay of a perceptually challenging speech input and a slower onset of early vocabulary experience, which in turn may delay the onset of word learning skills in Danish-learning children....

  8. Automated cell tracking and analysis in phase-contrast videos (iTrack4U: development of Java software based on combined mean-shift processes.

    Directory of Open Access Journals (Sweden)

    Fabrice P Cordelières

    Full Text Available Cell migration is a key biological process with a role in both physiological and pathological conditions. Locomotion of cells during embryonic development is essential for their correct positioning in the organism; immune cells have to migrate and circulate in response to injury. Failure of cells to migrate or an inappropriate acquisition of migratory capacities can result in severe defects such as altered pigmentation, skull and limb abnormalities during development, and defective wound repair, immunosuppression or tumor dissemination. The ability to accurately analyze and quantify cell migration is important for our understanding of development, homeostasis and disease. In vitro cell tracking experiments, using primary or established cell cultures, are often used to study migration as cells can quickly and easily be genetically or chemically manipulated. Images of the cells are acquired at regular time intervals over several hours using microscopes equipped with CCD camera. The locations (x,y,t of each cell on the recorded sequence of frames then need to be tracked. Manual computer-assisted tracking is the traditional method for analyzing the migratory behavior of cells. However, this processing is extremely tedious and time-consuming. Most existing tracking algorithms require experience in programming languages that are unfamiliar to most biologists. We therefore developed an automated cell tracking program, written in Java, which uses a mean-shift algorithm and ImageJ as a library. iTrack4U is a user-friendly software. Compared to manual tracking, it saves considerable amount of time to generate and analyze the variables characterizing cell migration, since they are automatically computed with iTrack4U. Another major interest of iTrack4U is the standardization and the lack of inter-experimenter differences. Finally, iTrack4U is adapted for phase contrast and fluorescent cells.

  9. Automated cell tracking and analysis in phase-contrast videos (iTrack4U): development of Java software based on combined mean-shift processes.

    Science.gov (United States)

    Cordelières, Fabrice P; Petit, Valérie; Kumasaka, Mayuko; Debeir, Olivier; Letort, Véronique; Gallagher, Stuart J; Larue, Lionel

    2013-01-01

    Cell migration is a key biological process with a role in both physiological and pathological conditions. Locomotion of cells during embryonic development is essential for their correct positioning in the organism; immune cells have to migrate and circulate in response to injury. Failure of cells to migrate or an inappropriate acquisition of migratory capacities can result in severe defects such as altered pigmentation, skull and limb abnormalities during development, and defective wound repair, immunosuppression or tumor dissemination. The ability to accurately analyze and quantify cell migration is important for our understanding of development, homeostasis and disease. In vitro cell tracking experiments, using primary or established cell cultures, are often used to study migration as cells can quickly and easily be genetically or chemically manipulated. Images of the cells are acquired at regular time intervals over several hours using microscopes equipped with CCD camera. The locations (x,y,t) of each cell on the recorded sequence of frames then need to be tracked. Manual computer-assisted tracking is the traditional method for analyzing the migratory behavior of cells. However, this processing is extremely tedious and time-consuming. Most existing tracking algorithms require experience in programming languages that are unfamiliar to most biologists. We therefore developed an automated cell tracking program, written in Java, which uses a mean-shift algorithm and ImageJ as a library. iTrack4U is a user-friendly software. Compared to manual tracking, it saves considerable amount of time to generate and analyze the variables characterizing cell migration, since they are automatically computed with iTrack4U. Another major interest of iTrack4U is the standardization and the lack of inter-experimenter differences. Finally, iTrack4U is adapted for phase contrast and fluorescent cells.

  10. A study of V79 cell survival after for proton and carbon ion beams as represented by the parameters of Katz' track structure model

    DEFF Research Database (Denmark)

    Grzanka, Leszek; Waligórski, M. P. R.; Bassler, Niels

    Katz’s theory of cellular track structure (1) is an amorphous analytical model which applies a set of four cellular parameters representing survival of a given cell line after ion irradiation. Usually the values of these parameters are best fitted to a full set of experimentally measured survival...... carbon irradiation. 1. Katz, R., Track structure in radiobiology and in radiation detection. Nuclear Track Detection 2: 1-28 (1978). 2. Furusawa Y. et al. Inactivation of aerobic and hypoxic cells from three different cell lines by accelerated 3He-, 12C- and 20Ne beams. Radiat Res. 2012 Jan; 177...... curves available for a variety of ions. Once fitted, using these parameter values and the analytical formulae of the model calculations, cellular survival curves and RBE may be predicted for that cell line after irradiation by any ion, including mixed ion fields. While it is known that the Katz model...

  11. Estimation of Structure-Borne Noise Reduction Effect of Steel Railway Bridge Equipped with Floating Ladder Track and Floating Reinforced-Concrete Deck

    Science.gov (United States)

    Watanabe, Tsutomu; Sogabe, Masamichi; Asanuma, Kiyoshi; Wakui, Hajime

    A number of steel railway bridges have been constructed in Japan. Thin steel members used for the bridges easily tend to vibrate and generate structure-borne noise. Accordingly, the number of constructions of steel railway bridges tends to decrease in the urban areas from a viewpoint of environmental preservation. Then, as a countermeasure against structure-borne noise generated from steel railway bridges, we have developed a new type of the steel railway bridge equipped with a floating-ladder track and a floating reinforced-concrete (RC) deck. As a result of train-running experiment, it became apparent that the new steel railway bridge installed by double floating system has reduced a vibration velocity level by 10.5 dB(A) at main girder web as compared with a steel railway bridge installed by directly fastened track. This reduction effect was achieved by the ladder track and RC deck supported by resilient materials.

  12. X-ray irradiation-induced structural modifications in PM-355 polymeric nuclear track detector film

    Science.gov (United States)

    Nouh, S. A.; Bahareth, Radiyah A.; Abutalib, M. M.

    2014-06-01

    Samples from sheets of the polymeric material PM-355 have been exposed to X-rays from a 50 kV X-ray tube in the dose range of 10-300 kGy. The resultant effect of X-ray irradiation on the structural properties of PM-355 has been investigated using different techniques such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Vickers hardness and refractive index measurements. The results indicate that the X-ray irradiation of PM-355 in the dose range of 10-20 kGy causes initially chain scission. Above 20 and up to 100 kGy, the active free radicals produced from scission contribute to chemical reactions that lead to the crosslinking. Thus, the X-ray irradiation in the dose range of 20-100 kGy leads to a more compact structure of the PM-355 polymer, resulting in an enhancement of its Vickers hardness and refractive index. Moreover, the irradiation in the dose range of 100-300 kGy leads to the predominance of the degradation. This degradation is reported by FTIR spectroscopy and enhances the degree of ordering in the degraded samples as revealed by XRD technique. Additionally, it decreases both the Vickers hardness and refractive index of the PM-355 samples.

  13. Numerical Limit Analysis of Reinforced Concrete Structures

    DEFF Research Database (Denmark)

    Larsen, Kasper Paaske

    For more than half a century, limit state analysis based on the extremum principles have been used to assess the load bearing capacity of reinforced concrete structures. Extensi- ve research within the field has lead to several techniques for performing such analysis manually. While these manual...... methods provide engineers with valuable tools for limit sta- te analysis, their application becomes difficult with increased structural complexity. The main challenge is to solve the optimization problem posed by the extremum principles. This thesis is a study of how numerical methods can be used to solve...... limit state analysis problems. The work focuses on determination of the load bearing capacity of reinforced concrete structures by employing the lower bound theorem and a finite element method using equilibrium elements is developed. The recent year’s development within the field of convex optimization...

  14. RNA interference and single particle tracking analysis of hepatitis C virus endocytosis.

    Directory of Open Access Journals (Sweden)

    Kelly E Coller

    2009-12-01

    Full Text Available Hepatitis C virus (HCV enters hepatocytes following a complex set of receptor interactions, culminating in internalization via clathrin-mediated endocytosis. However, aside from receptors, little is known about the cellular molecular requirements for infectious HCV entry. Therefore, we analyzed a siRNA library that targets 140 cellular membrane trafficking genes to identify host genes required for infectious HCV production and HCV pseudoparticle entry. This approach identified 16 host cofactors of HCV entry that function primarily in clathrin-mediated endocytosis, including components of the clathrin endocytosis machinery, actin polymerization, receptor internalization and sorting, and endosomal acidification. We next developed single particle tracking analysis of highly infectious fluorescent HCV particles to examine the co-trafficking of HCV virions with cellular cofactors of endocytosis. We observe multiple, sequential interactions of HCV virions with the actin cytoskeleton, including retraction along filopodia, actin nucleation during internalization, and migration of internalized particles along actin stress fibers. HCV co-localizes with clathrin and the ubiquitin ligase c-Cbl prior to internalization. Entering HCV particles are associated with the receptor molecules CD81 and the tight junction protein, claudin-1; however, HCV-claudin-1 interactions were not restricted to Huh-7.5 cell-cell junctions. Surprisingly, HCV internalization generally occurred outside of Huh-7.5 cell-cell junctions, which may reflect the poorly polarized nature of current HCV cell culture models. Following internalization, HCV particles transport with GFP-Rab5a positive endosomes, which is consistent with trafficking to the early endosome. This study presents technical advances for imaging HCV entry, in addition to identifying new host cofactors of HCV infection, some of which may be antiviral targets.

  15. Track Reconstruction in the ATLAS Experiment The Deterministic Annealing Filter

    CERN Document Server

    Fleischmann, S

    2006-01-01

    The reconstruction of the trajectories of charged particles is essential for experiments at the LHC. The experiments contain precise tracking systems structured in layers around the collision point which measure the positions where particle trajectories intersect those layers. The physics analysis on the other hand mainly needs the momentum and direction of the particle at the estimated creation or reaction point. It is therefore needed to determine these parameters from the initial measurements. At the LHC one has to deal with high backgrounds while even small deficits or artifacts can reduce the signal or may produce additional background after event selection. The track reconstruction does not only contain the estimation of the track parameters, but also a pattern recognition deciding which measurements belong to a track and how many particle tracks can be found. Track reconstruction at the ATLAS experiment suffers from the high event rate at the LHC resulting in a high occupancy of the tracking devices. A...

  16. Impact of x-ray dose on track formation and data analysis for CR-39-based proton diagnostics

    International Nuclear Information System (INIS)

    Rinderknecht, H. G.; Rojas-Herrera, J.; Zylstra, A. B.; Frenje, J. A.; Gatu Johnson, M.; Sio, H.; Sinenian, N.; Rosenberg, M. J.; Li, C. K.; Séguin, F. H.; Petrasso, R. D.; Filkins, T.; Steidle, Jessica A.; Traynor, N.; Freeman, C.; Steidle, Jeffrey A.

    2015-01-01

    The nuclear track detector CR-39 is used extensively for charged particle diagnosis, in particular proton spectroscopy, at inertial confinement fusion facilities. These detectors can absorb x-ray doses from the experiments in the order of 1–100 Gy, the effects of which are not accounted for in the previous detector calibrations. X-ray dose absorbed in the CR-39 has previously been shown to affect the track size of alpha particles in the detector, primarily due to a measured reduction in the material bulk etch rate [Rojas-Herrera et al., Rev. Sci. Instrum. 86, 033501 (2015)]. Similar to the previous findings for alpha particles, protons with energies in the range 0.5–9.1 MeV are shown to produce tracks that are systematically smaller as a function of the absorbed x-ray dose in the CR-39. The reduction of track size due to x-ray dose is found to diminish with time between exposure and etching if the CR-39 is stored at ambient temperature, and complete recovery is observed after two weeks. The impact of this effect on the analysis of data from existing CR-39-based proton diagnostics on OMEGA and the National Ignition Facility is evaluated and best practices are proposed for cases in which the effect of x rays is significant

  17. Preceding Vehicle Detection and Tracking Adaptive to Illumination Variation in Night Traffic Scenes Based on Relevance Analysis

    Science.gov (United States)

    Guo, Junbin; Wang, Jianqiang; Guo, Xiaosong; Yu, Chuanqiang; Sun, Xiaoyan

    2014-01-01

    Preceding vehicle detection and tracking at nighttime are challenging problems due to the disturbance of other extraneous illuminant sources coexisting with the vehicle lights. To improve the detection accuracy and robustness of vehicle detection, a novel method for vehicle detection and tracking at nighttime is proposed in this paper. The characteristics of taillights in the gray level are applied to determine the lower boundary of the threshold for taillights segmentation, and the optimal threshold for taillight segmentation is calculated using the OTSU algorithm between the lower boundary and the highest grayscale of the region of interest. The candidate taillight pairs are extracted based on the similarity between left and right taillights, and the non-vehicle taillight pairs are removed based on the relevance analysis of vehicle location between frames. To reduce the false negative rate of vehicle detection, a vehicle tracking method based on taillights estimation is applied. The taillight spot candidate is sought in the region predicted by Kalman filtering, and the disturbed taillight is estimated based on the symmetry and location of the other taillight of the same vehicle. Vehicle tracking is completed after estimating its location according to the two taillight spots. The results of experiments on a vehicle platform indicate that the proposed method could detect vehicles quickly, correctly and robustly in the actual traffic environments with illumination variation. PMID:25195855

  18. Analysis on Tracking Schedule and Measurements Characteristics for the Spacecraft on the Phase of Lunar Transfer and Capture

    Directory of Open Access Journals (Sweden)

    Young-Joo Song

    2014-03-01

    Full Text Available In this work, the preliminary analysis on both the tracking schedule and measurements characteristics for the spacecraft on the phase of lunar transfer and capture is performed. To analyze both the tracking schedule and measurements characteristics, lunar transfer and capture phases’ optimized trajectories are directly adapted from former research, and eleven ground tracking facilities (three Deep Space Network sties, seven Near Earth Network sites, one Daejeon site are assumed to support the mission. Under these conceptual mission scenarios, detailed tracking schedules and expected measurement characteristics during critical maneuvers (Trans Lunar Injection, Lunar Orbit Insertion and Apoap¬sis Adjustment Maneuver, especially for the Deajeon station, are successfully analyzed. The orders of predicted measurements’ variances during lunar capture phase according to critical maneuvers are found to be within the order of mm/s for the range and micro-deg/s for the angular measurements rates which are in good agreement with the recommended values of typical measurement modeling accuracies for Deep Space Networks. Although preliminary navigation accuracy guidelines are provided through this work, it is expected to give more practical insights into preparing the Korea’s future lunar mission, especially for developing flight dynamics subsystem.

  19. The use of advanced tracking technologies for the analysis of mobility in Alzheimer's disease and related cognitive diseases

    Directory of Open Access Journals (Sweden)

    Wahl Hans-Werner

    2008-03-01

    Full Text Available Abstract Background One of the more common behavioral manifestations of dementia-related disorders is severe problems with out-of-home mobility. Various efforts have been attempted to attain a better understanding of mobility behavior, but most studies are based on institutionalized patients and the assessment usually relies on reports of caregivers and institutional staff, using observational approaches, activity monitoring, or behavioral checklists. The current manuscript describes the research protocol of a project that measures mobility in Alzheimer's disease and related cognitive disorders in an innovative way, by taking advantage of advanced tracking technologies. Methods/design Participants are 360 demented persons, mildly cognitively impaired persons, and unimpaired controls aged ≥ 65 in Israel and Germany. Data regarding space-time activities will be collected via a GPS tracking kit for a period of 4 weeks in 3 waves (one year apart with the same participants (using a repeated measures design. Participants will be interviewed by use of a battery of instruments prior to and following GPS data collection. Further, a family member will complete a questionnaire both before and after data tracking. Statistical analyses will strive to explain differences in mobility based on a wide range of socio-structural, clinical, affect-related and environmental variables. We will also assess the impact of the use of advanced tracking technology on the quality of life of dementia patients and care givers, as well as its potential as a diagnostic tool. Systematic assessment of ethical issues involved in the use of tracking technology will be an integral component of the project. Discussion This project will be able to make a substantial contribution to basic as well as applied and clinical aspects in the area of mobility and cognitive impairment research. The innovative technologies applied in this study will allow for assessing a range of dimensions of

  20. Automation of peak-tracking analysis of stepwise perturbed NMR spectra.

    Science.gov (United States)

    Banelli, Tommaso; Vuano, Marco; Fogolari, Federico; Fusiello, Andrea; Esposito, Gennaro; Corazza, Alessandra

    2017-02-01

    We describe a new algorithmic approach able to automatically pick and track the NMR resonances of a large number of 2D NMR spectra acquired during a stepwise variation of a physical parameter. The method has been named Trace in Track (TINT), referring to the idea that a gaussian decomposition traces peaks within the tracks recognised through 3D mathematical morphology. It is capable of determining the evolution of the chemical shifts, intensity and linewidths of each tracked peak.The performances obtained in term of track reconstruction and correct assignment on realistic synthetic spectra were high above 90% when a noise level similar to that of experimental data were considered. TINT was applied successfully to several protein systems during a temperature ramp in isotope exchange experiments. A comparison with a state-of-the-art algorithm showed promising results for great numbers of spectra and low signal to noise ratios, when the graduality of the perturbation is appropriate. TINT can be applied to different kinds of high throughput chemical shift mapping experiments, with quasi-continuous variations, in which a quantitative automated recognition is crucial.

  1. Automation of peak-tracking analysis of stepwise perturbed NMR spectra

    Energy Technology Data Exchange (ETDEWEB)

    Banelli, Tommaso; Vuano, Marco [Università di Udine, Dipartimento di Area Medica (Italy); Fogolari, Federico [INBB (Italy); Fusiello, Andrea [Università di Udine, Dipartimento Politecnico di Ingegneria e Architettura (Italy); Esposito, Gennaro [INBB (Italy); Corazza, Alessandra, E-mail: alessandra.corazza@uniud.it [Università di Udine, Dipartimento di Area Medica (Italy)

    2017-02-15

    We describe a new algorithmic approach able to automatically pick and track the NMR resonances of a large number of 2D NMR spectra acquired during a stepwise variation of a physical parameter. The method has been named Trace in Track (TinT), referring to the idea that a gaussian decomposition traces peaks within the tracks recognised through 3D mathematical morphology. It is capable of determining the evolution of the chemical shifts, intensity and linewidths of each tracked peak.The performances obtained in term of track reconstruction and correct assignment on realistic synthetic spectra were high above 90% when a noise level similar to that of experimental data were considered. TinT was applied successfully to several protein systems during a temperature ramp in isotope exchange experiments. A comparison with a state-of-the-art algorithm showed promising results for great numbers of spectra and low signal to noise ratios, when the graduality of the perturbation is appropriate. TinT can be applied to different kinds of high throughput chemical shift mapping experiments, with quasi-continuous variations, in which a quantitative automated recognition is crucial.

  2. From tracking code to analysis generalised Courant-Snyder theory for any accelerator model

    CERN Document Server

    Forest, Etienne

    2016-01-01

    This book illustrates a theory well suited to tracking codes, which the author has developed over the years. Tracking codes now play a central role in the design and operation of particle accelerators. The theory is fully explained step by step with equations and actual codes that the reader can compile and run with freely available compilers. In this book, the author pursues a detailed approach based on finite “s”-maps, since this is more natural as long as tracking codes remain at the center of accelerator design. The hierarchical nature of software imposes a hierarchy that puts map-based perturbation theory above any other methods. This is not a personal choice: it follows logically from tracking codes overloaded with a truncated power series algebra package. After defining abstractly and briefly what a tracking code is, the author illustrates most of the accelerator perturbation theory using an actual code: PTC. This book may seem like a manual for PTC; however, the reader is encouraged to explore...

  3. Safety of fast track surgery in pancreaticoduodenectomy: a Meta-analysis

    Directory of Open Access Journals (Sweden)

    LI Weinan

    2017-01-01

    Full Text Available ObjectiveTo investigate the safety and clinical effect of fast track surgery in pancreaticoduodenectomy, one of the most complex surgeries in general surgery. MethodsThe Chinese and foreign databases were searched for articles on the application of fast tract surgery in pancreaticoduodenectomy published from January 1994 to April 2016. Two researchers evaluated the quality of the articles which met the inclusion criteria and extracted related data. Stata 12.0 software was used to analyze the overall incidence rate of complications and the incidence rates of pancreatic leakage and gastrointestinal emptying disorder, and the Begg rank correlation test and Egger linear regression method were used to investigate publication bias. ResultsThe fast track surgery group had a significantly lower overall incidence rate of complications than the conventional group (RR=0.748, 95%CI: 0.680-0.824, P<0.001. There was no significant difference in the incidence rate of pancreatic leakage between the two groups (RR=0.894, 95%CI:0.734-1.089, P=0.266. The fast track surgery group had a significantly lower incidence rate of gastrointestinal emptying disorder than the conventional group (RR=0.520, 95%CI:0.400-0.670, P<0.001. ConclusionFast track surgery is safe and effective in pancreaticoduodenectomy, but the application of some measures in fast track surgery still needs more medical evidence.

  4. Parameter Deduction and Accuracy Analysis of Track Beam Curves in Straddle-type Monorail Systems

    Directory of Open Access Journals (Sweden)

    Xiaobo Zhao

    2015-12-01

    Full Text Available The accuracy of the bottom curve of a PC track beam is strongly related to the production quality of the entire beam. Many factors may affect the parameters of the bottom curve, such as the superelevation of the curve and the deformation of a PC track beam. At present, no effective method has been developed to determine the bottom curve of a PC track beam; therefore, a new technique is presented in this paper to deduce the parameters of such a curve and to control the accuracy of the computation results. First, the domain of the bottom curve of a PC track beam is assumed to be a spindle plane. Then, the corresponding supposed top curve domain is determined based on a geometrical relationship that is the opposite of that identified by the conventional method. Second, several optimal points are selected from the supposed top curve domain according to the dichotomy algorithm; the supposed top curve is thus generated by connecting these points. Finally, one rigorous criterion is established in the fractal dimension to assess the accuracy of the assumed top curve deduced in the previous step. If this supposed curve coincides completely with the known top curve, then the assumed bottom curve corresponding to the assumed top curve is considered to be the real bottom curve. This technique of determining the bottom curve of a PC track beam is thus proven to be efficient and accurate.

  5. Analysis of latent structures in linear systems

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    2004-01-01

    In chemometrics the emphasis is on latent structure models. The latent structure is the part of the data that the modeling task is based upon. This paper is addressing some fundamental issues, when latent structures are used. The paper consists of three parts. The first part is concerned defining...... the latent structure of a linear model. Here the ‘atomic’ parts of the algorithms that generate the latent structure for linear models are analyzed. It is shown how the PLS algorithm fits within this way of presenting the numerical procedures. The second part is concerning graphic illustrations...... to use for deciding if single or multiple latent structures should be used. The last part is about choosing the variables that should be used in the analysis. The traditional procedures to select variables to include in the model are presented and the insufficiencies of such approaches are demonstrated...

  6. Analysis of the Dynamic Response in the Railway Vehicles to the Track Vertical Irregularities. Part I: The Theoretical Model and the Vehicle Response Functions

    Directory of Open Access Journals (Sweden)

    M. Dumitriu

    2015-11-01

    Full Text Available The paper herein focuses on the dynamic response of a two-bogie vehicle to the excitations derived from the track vertical irregularities. The symmetrical and antisymmetrical modes due from the bounce and pitch motions of the axles’ planes in the two bogies are being considered. The analysis of the dynamic response in the vehicle relies on the response functions in three reference points of the carbody, composed by means of these response functions to the symmetrical and antisymmetrical excitation modes. Similarly, the dynamic response of the vehicle to the track stochastic irregularities is examined and expressed as a power spectral density of the carbody vertical acceleration and the root mean square of the acceleration and the index of the partial comfort to the vertical vibrations is calculated. The paper is structured into two parts. The Part I includes all the theoretical elements required for the analysis of the dynamic response in the vehicle, while Part II introduces the results of the numerical analysis.

  7. Analysis of Load-Carrying Capacity for Redundant Free-Floating Space Manipulators in Trajectory Tracking Task

    OpenAIRE

    Jia, Qingxuan; Liu, Yong; Chen, Gang; Sun, Hanxu; Peng, Junjie

    2014-01-01

    The aim of this paper is to analyze load-carrying capacity of redundant free-floating space manipulators (FFSM) in trajectory tracking task. Combined with the analysis of influential factors in load-carrying process, evaluation of maximum load-carrying capacity (MLCC) is described as multiconstrained nonlinear programming problem. An efficient algorithm based on repeated line search within discontinuous feasible region is presented to determine MLCC for a given trajectory of the end-effector ...

  8. Design, Construction and Effectiveness Analysis of Hybrid Automatic Solar Tracking System for Amorphous and Crystalline Solar Cells

    OpenAIRE

    Bhupendra Gupta

    2013-01-01

    - This paper concerns the design and construction of a Hybrid solar tracking system. The constructed device was implemented by integrating it with Amorphous & Crystalline Solar Panel, three dimensional freedom mechanism and microcontroller. The amount of power available from a photovoltaic panel is determined by three parameters, the type of solar tracker, materials of solar panel and the intensity of the sunlight. The objective of this paper is to present analysis on the use of two differ...

  9. Analysis of LFM-waveform Libraries for Cognitive Tracking Maneuvering Targets

    Directory of Open Access Journals (Sweden)

    Wang Hongyan

    2016-01-01

    Full Text Available Based on the idea of the waveform agility in cognitive radars,the waveform libraries for maneuvering target tracking are discussed. LFM-waveform libraries are designed according to different combinations of chirp parameters and FrFT rotation angles. By applying the interact multiple model (IMM algorithm in tracking maneuvering targets, transmitted waveform is called real time from the LFM-waveform libraries. The waveforms are selected from the library according to the criterion of maximum mutual information between the current state of knowledge of the model and the measurement. Simulation results show that waveform library containing certain amount LFM-waveforms can improve the performance of cognitive tracking radar.

  10. Quality of Slab Track Construction – Track Alignment Design and Track Geometry

    Directory of Open Access Journals (Sweden)

    Šestáková Janka

    2015-05-01

    Full Text Available The slab track superstructure design (without ballast is a perspective construction especially for building tunnels and bridges in the modernized sections of railway tracks in Slovakia. Monitoring of the structure described in this article is focused on the transition areas between standard structure with ballast and slab track construction.

  11. Quality of Slab Track Construction – Track Alignment Design and Track Geometry

    OpenAIRE

    Šestáková Janka

    2015-01-01

    The slab track superstructure design (without ballast) is a perspective construction especially for building tunnels and bridges in the modernized sections of railway tracks in Slovakia. Monitoring of the structure described in this article is focused on the transition areas between standard structure with ballast and slab track construction.

  12. Method for aortic wall strain measurement with three-dimensional ultrasound speckle tracking and fitted finite element analysis.

    Science.gov (United States)

    Karatolios, Konstantinos; Wittek, Andreas; Nwe, Thet Htar; Bihari, Peter; Shelke, Amit; Josef, Dennis; Schmitz-Rixen, Thomas; Geks, Josef; Maisch, Bernhard; Blase, Christopher; Moosdorf, Rainer; Vogt, Sebastian

    2013-11-01

    Aortic wall strains are indicators of biomechanical changes of the aorta due to aging or progressing pathologies such as aortic aneurysm. We investigated the potential of time-resolved three-dimensional ultrasonography coupled with speckle-tracking algorithms and finite element analysis as a novel method for noninvasive in vivo assessment of aortic wall strain. Three-dimensional volume datasets of 6 subjects without cardiovascular risk factors and 2 abdominal aortic aneurysms were acquired with a commercial real time three-dimensional echocardiography system. Longitudinal and circumferential strains were computed offline with high spatial resolution using a customized commercial speckle-tracking software and finite element analysis. Indices for spatial heterogeneity and systolic dyssynchrony were determined for healthy abdominal aortas and abdominal aneurysms. All examined aortic wall segments exhibited considerable heterogenous in-plane strain distributions. Higher spatial resolution of strain imaging resulted in the detection of significantly higher local peak strains (p ≤ 0.01). In comparison with healthy abdominal aortas, aneurysms showed reduced mean strains and increased spatial heterogeneity and more pronounced temporal dyssynchrony as well as delayed systole. Three-dimensional ultrasound speckle tracking enables the analysis of spatially highly resolved strain fields of the aortic wall and offers the potential to detect local aortic wall motion deformations and abnormalities. These data allow the definition of new indices by which the different biomechanical properties of healthy aortas and aortic aneurysms can be characterized. Copyright © 2013 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  13. Structure and logical organization of current studies in track and field sports

    Directory of Open Access Journals (Sweden)

    V.I. Bobrovnik

    2014-03-01

    Full Text Available Purpose: to develop a system of assessment and prediction of technical skill athletes-athletes. Material : the study involved 450 athletes qualifications. Results : in the process of preparing members of the Ukrainian national team implemented a system of assessment of mental state. It includes: a set of informative indicators biomechanical laws and their changes; biomechanical model of motor actions; technology operational biomechanical modeling, changes in the functional state of the viscoelastic properties of skeletal muscle vestibulomotornoy system and speed- force readiness, evaluation and prediction of physical condition of athletes qualified. And complex pedagogical tests and scorecards. For the evaluation of the functional state of the autonomic nervous, cardiovascular system, external respiration system by analyzing the electrocardiogram, heart rate variability, the definition of autonomic balance, state of the myocardium, cardiac arrhythmias, spirometric studies, system performance evaluation of the athlete in extreme conditions by identifying the type and properties of temperament, level of personal anxiety and psychological evaluation reliability athletes. Conclusions : the structure and logical organization of modern studies of different primary focus, based on the assessment of technical skills, physical fitness, functional and mental state of highly skilled athletes.

  14. Tracking dynamics of plant biomass composting by changes in substrate structure, microbial community, and enzyme activity

    Directory of Open Access Journals (Sweden)

    Wei Hui

    2012-04-01

    Full Text Available Abstract Background Understanding the dynamics of the microbial communities that, along with their secreted enzymes, are involved in the natural process of biomass composting may hold the key to breaking the major bottleneck in biomass-to-biofuels conversion technology, which is the still-costly deconstruction of polymeric biomass carbohydrates to fermentable sugars. However, the complexity of both the structure of plant biomass and its counterpart microbial degradation communities makes it difficult to investigate the composting process. Results In this study, a composter was set up with a mix of yellow poplar (Liriodendron tulipifera wood-chips and mown lawn grass clippings (85:15 in dry-weight and used as a model system. The microbial rDNA abundance data obtained from analyzing weekly-withdrawn composted samples suggested population-shifts from bacteria-dominated to fungus-dominated communities. Further analyses by an array of optical microscopic, transcriptional and enzyme-activity techniques yielded correlated results, suggesting that such population shifts occurred along with early removal of hemicellulose followed by attack on the consequently uncovered cellulose as the composting progressed. Conclusion The observed shifts in dominance by representative microbial groups, along with the observed different patterns in the gene expression and enzymatic activities between cellulases, hemicellulases, and ligninases during the composting process, provide new perspectives for biomass-derived biotechnology such as consolidated bioprocessing (CBP and solid-state fermentation for the production of cellulolytic enzymes and biofuels.

  15. Amphibian DNA shows marked genetic structure and tracks pleistocene climate change in northeastern Brazil.

    Science.gov (United States)

    Carnaval, Ana Carolina; Bates, John M

    2007-12-01

    The glacial refugia paradigm has been broadly applied to patterns of species dynamics and population diversification. However, recent geological studies have demonstrated striking Pleistocene climate changes in currently semiarid northeastern Brazil at time intervals much more frequent than the climatic oscillations associated with glacial and interglacial periods. These geomorphic data documented recurrent pulses of wet regimes in the past 210,000 years that correlate with climate anomalies affecting multiple continents. While analyzing DNA sequences of two mitochondrial genes (cytochrome b and NADH-dehydrogenase subunit 2) and one nuclear marker (cellular-myelocytomatosis proto-oncogene) in the forest-associated frogs Proceratophrys boiei and Ischnocnema gr. ramagii, we found evidence of biological responses consistent with these pluvial maxima events. Sampled areas included old, naturally isolated forest enclaves within the semiarid Caatinga, as well as recent man-made fragments of humid coastal Atlantic forest. Results show that mtDNA lineages in enclave populations are monophyletic or nearly so, whereas nonenclave populations are polyphyletic and more diverse. The studied taxa show evidence of demographic expansions at times that match phases of pluvial maxima inferred from geological data. Divergence times between several populations fall within comparatively drier intervals suggested by geomorphology. Mitochondrial and nuclear data show local populations to be genetically structured, with some high levels of differentiation that suggest the need of further taxonomic work.

  16. Time line cell tracking for the approximation of lagrangian coherent structures with subgrid accuracy

    KAUST Repository

    Kuhn, Alexander

    2013-12-05

    Lagrangian coherent structures (LCSs) have become a widespread and powerful method to describe dynamic motion patterns in time-dependent flow fields. The standard way to extract LCS is to compute height ridges in the finite-time Lyapunov exponent field. In this work, we present an alternative method to approximate Lagrangian features for 2D unsteady flow fields that achieve subgrid accuracy without additional particle sampling. We obtain this by a geometric reconstruction of the flow map using additional material constraints for the available samples. In comparison to the standard method, this allows for a more accurate global approximation of LCS on sparse grids and for long integration intervals. The proposed algorithm works directly on a set of given particle trajectories and without additional flow map derivatives. We demonstrate its application for a set of computational fluid dynamic examples, as well as trajectories acquired by Lagrangian methods, and discuss its benefits and limitations. © 2013 The Authors Computer Graphics Forum © 2013 The Eurographics Association and John Wiley & Sons Ltd.

  17. Topological feature extraction and tracking

    International Nuclear Information System (INIS)

    Bremer, P-T; Bringa, E M; Duchaineau, M A; Gyulassy, A G; Laney, D; Mascarenhas, A; Pascucci, V

    2007-01-01

    Scientific datasets obtained by measurement or produced by computational simulations must be analyzed to understand the phenomenon under study. The analysis typically requires a mathematically sound definition of the features of interest and robust algorithms to identify these features, compute statistics about them, and often track them over time. Because scientific datasets often capture phenomena with multi-scale behaviour, and almost always contain noise the definitions and algorithms must be designed with sufficient flexibility and care to allow multi-scale analysis and noise-removal. In this paper, we present some recent work on topological feature extraction and tracking with applications in molecular analysis, combustion simulation, and structural analysis of porous materials

  18. Application of probabilistic fiber-tracking method of MR imaging to measure impact of cranial irradiation on structural brain connectivity in children treated for medulloblastoma

    Science.gov (United States)

    Duncan, Elizabeth C.; Reddick, Wilburn E.; Glass, John O.; Hyun, Jung Won; Ji, Qing; Li, Yimei; Gajjar, Amar

    2016-03-01

    We applied a modified probabilistic fiber-tracking method for the extraction of fiber pathways to quantify decreased white matter integrity as a surrogate of structural loss in connectivity due to cranial radiation therapy (CRT) as treatment for pediatric medulloblastoma. Thirty subjects were examined (n=8 average-risk, n=22 high-risk) and the groups did not differ significantly in age at examination. The pathway analysis created a structural connectome focused on sub-networks within the central executive network (CEN) for comparison between baseline and post-CRT scans and for comparison between standard and high dose CRT. A paired-wise comparison of the connectivity between baseline and post-CRT scans showed the irradiation did have a significant detrimental impact on white matter integrity (decreased fractional anisotropy (FA) and decreased axial diffusivity (AX)) in most of the CEN sub-networks. Group comparisons of the change in the connectivity revealed that patients receiving high dose CRT experienced significant AX decreases in all sub-networks while the patients receiving standard dose CRT had relatively stable AX measures across time. This study on pediatric patients with medulloblastoma demonstrated the utility of this method to identify specific sub-networks within the developing brain affected by CRT.

  19. WE-DE-202-01: Connecting Nanoscale Physics to Initial DNA Damage Through Track Structure Simulations

    International Nuclear Information System (INIS)

    Schuemann, J.

    2016-01-01

    Radiation therapy for the treatment of cancer has been established as a highly precise and effective way to eradicate a localized region of diseased tissue. To achieve further significant gains in the therapeutic ratio, we need to move towards biologically optimized treatment planning. To achieve this goal, we need to understand how the radiation-type dependent patterns of induced energy depositions within the cell (physics) connect via molecular, cellular and tissue reactions to treatment outcome such as tumor control and undesirable effects on normal tissue. Several computational biology approaches have been developed connecting physics to biology. Monte Carlo simulations are the most accurate method to calculate physical dose distributions at the nanometer scale, however simulations at the DNA scale are slow and repair processes are generally not simulated. Alternative models that rely on the random formation of individual DNA lesions within one or two turns of the DNA have been shown to reproduce the clusters of DNA lesions, including single strand breaks (SSBs), double strand breaks (DSBs) without the need for detailed track structure simulations. Efficient computational simulations of initial DNA damage induction facilitate computational modeling of DNA repair and other molecular and cellular processes. Mechanistic, multiscale models provide a useful conceptual framework to test biological hypotheses and help connect fundamental information about track structure and dosimetry at the sub-cellular level to dose-response effects on larger scales. In this symposium we will learn about the current state of the art of computational approaches estimating radiation damage at the cellular and sub-cellular scale. How can understanding the physics interactions at the DNA level be used to predict biological outcome? We will discuss if and how such calculations are relevant to advance our understanding of radiation damage and its repair, or, if the underlying biological

  20. WE-DE-202-02: Are Track Structure Simulations Truly Needed for Radiobiology at the Cellular and Tissue Levels?

    International Nuclear Information System (INIS)

    Stewart, R.

    2016-01-01

    Radiation therapy for the treatment of cancer has been established as a highly precise and effective way to eradicate a localized region of diseased tissue. To achieve further significant gains in the therapeutic ratio, we need to move towards biologically optimized treatment planning. To achieve this goal, we need to understand how the radiation-type dependent patterns of induced energy depositions within the cell (physics) connect via molecular, cellular and tissue reactions to treatment outcome such as tumor control and undesirable effects on normal tissue. Several computational biology approaches have been developed connecting physics to biology. Monte Carlo simulations are the most accurate method to calculate physical dose distributions at the nanometer scale, however simulations at the DNA scale are slow and repair processes are generally not simulated. Alternative models that rely on the random formation of individual DNA lesions within one or two turns of the DNA have been shown to reproduce the clusters of DNA lesions, including single strand breaks (SSBs), double strand breaks (DSBs) without the need for detailed track structure simulations. Efficient computational simulations of initial DNA damage induction facilitate computational modeling of DNA repair and other molecular and cellular processes. Mechanistic, multiscale models provide a useful conceptual framework to test biological hypotheses and help connect fundamental information about track structure and dosimetry at the sub-cellular level to dose-response effects on larger scales. In this symposium we will learn about the current state of the art of computational approaches estimating radiation damage at the cellular and sub-cellular scale. How can understanding the physics interactions at the DNA level be used to predict biological outcome? We will discuss if and how such calculations are relevant to advance our understanding of radiation damage and its repair, or, if the underlying biological

  1. Counting radon tracks in Makrofol detectors with the 'image reduction and analysis facility' (IRAF) software package

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, F. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain)]. E-mail: fimerall@ull.es; Gonzalez-Manrique, S. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain); Karlsson, L. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain); Hernandez-Armas, J. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain); Aparicio, A. [Instituto de Astrofisica de Canarias, 38200 La Laguna, Tenerife (Spain); Departamento de Astrofisica, Universidad de La Laguna. Avenida. Astrofisico Francisco Sanchez s/n, 38071 La Laguna, Tenerife (Spain)

    2007-03-15

    Makrofol detectors are commonly used for long-term radon ({sup 222}Rn) measurements in houses, schools and workplaces. The use of this type of passive detectors for the determination of radon concentrations requires the counting of the nuclear tracks produced by alpha particles on the detecting material. The 'image reduction and analysis facility' (IRAF) software package is a piece of software commonly used in astronomical applications. It allows detailed counting and mapping of sky sections where stars are grouped very closely, even forming clusters. In order to count the nuclear tracks in our Makrofol radon detectors, we have developed an inter-disciplinary application that takes advantage of the similitude that exist between counting stars in a dark sky and tracks in a track-etch detector. Thus, a low cost semi-automatic system has been set up in our laboratory which utilises a commercially available desktop scanner and the IRAF software package. A detailed description of the proposed semi-automatic method and its performance, in comparison to ocular counting, is described in detail here. In addition, the calibration factor for this procedure, 2.97+/-0.07kBqm{sup -3}htrack{sup -1}cm{sup 2}, has been calculated based on the results obtained from exposing 46 detectors to certified radon concentrations. Furthermore, the results of a preliminary radon survey carried out in 62 schools in Tenerife island (Spain), using Makrofol detectors, counted with the mentioned procedure, are briefly presented. The results reported here indicate that the developed procedure permits a fast, accurate and unbiased determination of the radon tracks in a large number of detectors. The measurements carried out in the schools showed that the radon concentrations in at least 12 schools were above 200Bqm{sup -3} and, in two of them, above 400Bqm{sup -3}. Further studies should be performed at those schools following the European Union recommendations about radon concentrations in

  2. Mesozoic and Cenozoic uplift and exhumation of the Bogda Mountain, NW China: Evidence from apatite fission track analysis

    Directory of Open Access Journals (Sweden)

    Wenhao Tang

    2015-07-01

    Full Text Available Apatite fission track (AFT analysis on samples collected from a Paleozoic series is used to constrain the cooling history of the Bogda Mountain, northwest China. AFT ages range from 136.2 to 85.6 Ma and are younger than rock depositional ages and the mean confined track lengths (11.0–13.2 μm mostly showing unimodal distribution are shorten, indicating significant track-annealing. Thermal histories modeling based on the distribution of fission-track lengths combined with the regional geological data show that two rapid cooling phases occurred in the latest Jurassic–early Cretaceous and the Oligocene–Miocene. Those new data together with previous published data show that the AFT ages become younger from the southwest to northeast in the western Bogda Mountain and its adjacent areas. The fission-track ages of the southwest area are relatively older (>100 Ma, recording the earlier rapid uplift phase during the late Jurassic–Cretaceous, while the ages in the north piedmont of the Bogda Mountain (namely the northeast part are younger (<60 Ma, mainly reflecting the later rapid uplift phase in the Oligocene–Miocene. The trend of younger AFT ages towards the northeast might be explained by post-Cretaceous large-scale crustal tilting towards the southwest. In the thrust fault-dominated northern limbs of the Bogda Mountain, AFT ages reveal a discontinuous pattern with age-jumps across the major fault zones, showing a possible strata tilting across each thrust faults due to the thrust ramps during the Cenozoic. The two rapid uplift stages might be related to the accretion and collision in the southern margin of the Asian continent during the late Jurassic and late Cenozoic, respectively.

  3. Structural dynamic analysis of nuclear power plants

    International Nuclear Information System (INIS)

    Halbritter, A.L.; Koishi, N.; Prates, C.L.M.

    1986-01-01

    One of the most important items to be considered in order to guarantee the safety conditions of a Nuclear Power Plant is the design of the civil structures, the electrical and mechanical components and piping system taking into account non-conventional loading cases, e.g. earthquakes and explosions pressure waves. The general procedures used in the structural dynamic analysis of Nuclear Power Plants are presented, specially for seismic and explosion loads. (Author) [pt

  4. Modeling of creep for structural analysis

    Energy Technology Data Exchange (ETDEWEB)

    Naumenko, K.; Altenbach, H. [Halle-Wittenberg Univ., Halle (Germany). Lehrstuhl fuer Technische Mechanik

    2007-07-01

    ''Creep Modeling for Structural Analysis'' develops methods to simulate and analyze the time-dependent changes of stress and strain states in engineering structures up to the critical stage of creep rupture. The principal subjects of creep mechanics are the formulation of constitutive equations for creep in structural materials under multi-axial stress states; the application of structural mechanics models of beams, plates, shells and three-dimensional solids and the utilization of procedures for the solution of non-linear initial-boundary value problems. The objective of this book is to review some of the classical and recently proposed approaches to the modeling of creep for structural analysis applications as well as to extend the collection of available solutions of creep problems by new, more sophisticated examples. In Chapter 1, the book discusses basic features of the creep behavior in materials and structures and presents an overview of various approaches to the modeling of creep. Chapter 2 collects constitutive models that describe creep and damage processes under multi-axial stress states. Chapter 3 deals with the application of constitutive models to the description of creep for several structural materials. Constitutive and evolution equations, response functions and material constants are presented according to recently published experimental data. In Chapter 4 the authors discuss structural mechanics problems. Governing equations of creep in three-dimensional solids, direct variational methods and time step algorithms are reviewed. Examples are presented to illustrate the application of advanced numerical methods to the structural analysis. An emphasis is placed on the development and verification of creep-damage material subroutines inside the general purpose finite element codes. (orig.)

  5. Analysis of warm season thunderstorms using an object-oriented tracking method based on radar and total lightning data

    Directory of Open Access Journals (Sweden)

    T. Rigo

    2010-09-01

    Full Text Available Monitoring thunderstorms activity is an essential part of operational weather surveillance given their potential hazards, including lightning, hail, heavy rainfall, strong winds or even tornadoes. This study has two main objectives: firstly, the description of a methodology, based on radar and total lightning data to characterise thunderstorms in real-time; secondly, the application of this methodology to 66 thunderstorms that affected Catalonia (NE Spain in the summer of 2006. An object-oriented tracking procedure is employed, where different observation data types generate four different types of objects (radar 1-km CAPPI reflectivity composites, radar reflectivity volumetric data, cloud-to-ground lightning data and intra-cloud lightning data. In the framework proposed, these objects are the building blocks of a higher level object, the thunderstorm.

    The methodology is demonstrated with a dataset of thunderstorms whose main characteristics, along the complete life cycle of the convective structures (development, maturity and dissipation, are described statistically. The development and dissipation stages present similar durations in most cases examined. On the contrary, the duration of the maturity phase is much more variable and related to the thunderstorm intensity, defined here in terms of lightning flash rate. Most of the activity of IC and CG flashes is registered in the maturity stage. In the development stage little CG flashes are observed (2% to 5%, while for the dissipation phase is possible to observe a few more CG flashes (10% to 15%. Additionally, a selection of thunderstorms is used to examine general life cycle patterns, obtained from the analysis of normalized (with respect to thunderstorm total duration and maximum value of variables considered thunderstorm parameters. Among other findings, the study indicates that the normalized duration of the three stages of thunderstorm life cycle is similar in most thunderstorms

  6. Data structures and algorithm analysis in Java

    CERN Document Server

    Shaffer, Clifford A

    2011-01-01

    With its focus on creating efficient data structures and algorithms, this comprehensive text helps readers understand how to select or design the tools that will best solve specific problems. It uses Java as the programming language and is suitable for second-year data structure courses and computer science courses in algorithm analysis. Techniques for representing data are presented within the context of assessing costs and benefits, promoting an understanding of the principles of algorithm analysis and the effects of a chosen physical medium. The text also explores tradeoff issues, familiari

  7. Data structures and algorithm analysis in C++

    CERN Document Server

    Shaffer, Clifford A

    2011-01-01

    With its focus on creating efficient data structures and algorithms, this comprehensive text helps readers understand how to select or design the tools that will best solve specific problems. It uses Microsoft C++ as the programming language and is suitable for second-year data structure courses and computer science courses in algorithm analysis.Techniques for representing data are presented within the context of assessing costs and benefits, promoting an understanding of the principles of algorithm analysis and the effects of a chosen physical medium. The text also explores tradeoff issues, f

  8. MBS Analysis Of Kinetic Structures Using ADAMS

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R.K.

    2009-01-01

    The present paper considers multibody system (MBS) analysis of kinetic structures using the software package ADAMS. Deployable, foldable, expandable and reconfigurable kinetic structures can provide a change in the geometric morphology of the envelope by contributing to making it adaptable to e......-called multibody system (MBS) formalism. The present paper considers MBS modeling of kinetic architectural structures using the software packages ADAMS. As a result, it is found that symbolic MBS simulation tools facilitate a useful evaluation environment for MBS users during a design phase of responsive kinetic...

  9. Entity Authentication:Analysis using Structured Intuition

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.

    2010-01-01

    In this paper, we propose a new method for the analysis that uses intuition of the analyst in a structured way. First we define entity authentication in terms of fine level authentication goals (FLAGs). Then we use some relevant structures in protocol narrations and use them to justify FLAGs...... for the protocol. All along this process, we discover vulnerabilities and unstated assumptions of the protocol. As the method is intuition based, the quality of results depends on the expertise of the security analyst, however, the structured intuition has two major advantages: Firstly we get a precise...

  10. Reliability analysis of prestressed concrete containment structures

    International Nuclear Information System (INIS)

    Jiang, J.; Zhao, Y.; Sun, J.

    1993-01-01

    The reliability analysis of prestressed concrete containment structures subjected to combinations of static and dynamic loads with consideration of uncertainties of structural and load parameters is presented. Limit state probabilities for given parameters are calculated using the procedure developed at BNL, while that with consideration of parameter uncertainties are calculated by a fast integration for time variant structural reliability. The limit state surface of the prestressed concrete containment is constructed directly incorporating the prestress. The sensitivities of the Choleskey decomposition matrix and the natural vibration character are calculated by simplified procedures. (author)

  11. Nonlinear stability analysis of the frame structures

    Directory of Open Access Journals (Sweden)

    Ćorić Stanko

    2016-01-01

    Full Text Available In this paper the phenomenon of instability of frames in elasto-plastic domain was investigated. Numerical analysis was performed by the finite element method. Stiffness matrices were derived using the trigonometric shape functions related to exact solution of the differential equation of bending according to the second order theory. When the buckling of structure occurs in plastic domain, it is necessary to replace the constant modulus of elasticity E with the tangent modulus Et. Tangent modulus is stress dependent function and takes into account the changes of the member stiffness in the inelastic range. For the purposes of numerical investigation in this analysis, part of the computer program ALIN was created in a way that this program now can be used for elastic and elasto-plastic stability analysis of frame structures. This program is developed in the C++ programming language. Using this program, it is possible to calculate the critical load of frames in the elastic and inelastic domain. In this analysis, the algorithm for the calculation of buckling lengths of compressed columns of the frames was also established. The algorithm is based on the calculation of the global stability analysis of frame structures. Results obtained using this algorithm were compared with the approximate solutions from the European (EC3 and national (JUS standards for the steel structures. By the given procedure in this paper it is possible to follow the behavior of the plane frames in plastic domain and to calculate the real critical load in that domain.

  12. Random vibration analysis of train-bridge under track irregularities and traveling seismic waves using train-slab track-bridge interaction model

    Science.gov (United States)

    Zeng, Zhi-Ping; Zhao, Yan-Gang; Xu, Wen-Tao; Yu, Zhi-Wu; Chen, Ling-Kun; Lou, Ping

    2015-04-01

    The frequent use of bridges in high-speed railway lines greatly increases the probability that trains are running on bridges when earthquakes occur. This paper investigates the random vibrations of a high-speed train traversing a slab track on a continuous girder bridge subjected to track irregularities and traveling seismic waves by the pseudo-excitation method (PEM). To derive the equations of motion of the train-slab track-bridge interaction system, the multibody dynamics and finite element method models are used for the train and the track and bridge, respectively. By assuming track irregularities to be fully coherent random excitations with time lags between different wheels and seismic accelerations to be uniformly modulated, non-stationary random excitations with time lags between different foundations, the random load vectors of the equations of motion are transformed into a series of deterministic pseudo-excitations based on PEM and the wheel-rail contact relationship. A computer code is developed to obtain the time-dependent random responses of the entire system. As a case study, the random vibration characteristics of an ICE-3 high-speed train traversing a seven-span continuous girder bridge simultaneously excited by track irregularities and traveling seismic waves are analyzed. The influence of train speed and seismic wave propagation velocity on the random vibration characteristics of the bridge and train are discussed.

  13. Object-Oriented Analysis, Structured Analysis, and Jackson System Development

    NARCIS (Netherlands)

    Van Assche, F.; Wieringa, Roelf J.; Moulin, B.; Rolland, C

    1991-01-01

    Conceptual modeling is the activity of producing a conceptual model of an actual or desired version of a universe of discourse (UoD). In this paper, two methods of conceptual modeling are compared, structured analysis (SA) and object-oriented analysis (OOA). This is done by transforming a model

  14. Technology forecasting for space communication. [analysis of systems for application to Spacecraft Data and Tracking Network

    Science.gov (United States)

    1973-01-01

    A study was conducted to determine techniques for application to space communication. The subjects considered are as follows: (1) optical communication systems, (2) laser communications for data acquisition networks, (3) spacecraft data rate requirements, (4) telemetry, command, and data handling, (5) spacecraft tracking and data network antenna and preamplifier cost tradeoff study, and (6) spacecraft communication terminal evaluation.

  15. Eye-Tracking Analysis of the Figures of Anti-Smoking Health Promoting Periodical's Illustrations

    Science.gov (United States)

    Maródi, Ágnes; Devosa, Iván; Steklács, János; Fáyné-Dombi, Alice; Buzas, Zsuzsanna; Vanya, Melinda

    2015-01-01

    Nowadays new education technologies and e-communication devices give new measuring and assessing tools for researchers. Eye-tracking is one of these new methods in education. In our study we assessed 4 figures from the anti-smoking heath issues of National Institute for Health Development. In the study 22 students were included from a 7th grade…

  16. Peer Assessment of Webpage Design: Behavioral Sequential Analysis Based on Eye-Tracking Evidence

    Science.gov (United States)

    Hsu, Ting-Chia; Chang, Shao-Chen; Liu, Nan-Cen

    2018-01-01

    This study employed an eye-tracking machine to record the process of peer assessment. Each web page was divided into several regions of interest (ROIs) based on the frame design and content. A total of 49 undergraduate students with a visual learning style participated in the experiment. This study investigated the peer assessment attitudes of the…

  17. Upgrading of LET track-etch spectrometer calibration: Calibration and uncertainty analysis

    Czech Academy of Sciences Publication Activity Database

    Spurný, František; Jadrníčková, Iva; Bamblevski, V. P.; Molokanov, A. G.

    2005-01-01

    Roč. 40, 2-6 (2005), s. 343-346 ISSN 1350-4487 R&D Projects: GA ČR GA202/04/0795 Keywords : LET spectrometer * heavy charged particles * track etch detectors Subject RIV: BO - Biophysics Impact factor: 1.023, year: 2005

  18. Statistical Analysis of Online Eye and Face-tracking Applications in Marketing

    Science.gov (United States)

    Liu, Xuan

    Eye-tracking and face-tracking technology have been widely adopted to study viewers' attention and emotional response. In the dissertation, we apply these two technologies to investigate effective online contents that are designed to attract and direct attention and engage viewers emotional responses. In the first part of the dissertation, we conduct a series of experiments that use eye-tracking technology to explore how online models' facial cues affect users' attention on static e-commerce websites. The joint effects of two facial cues, gaze direction and facial expression on attention, are estimated by Bayesian ANOVA, allowing various distributional assumptions. We also consider the similarities and differences in the effects of facial cues among American and Chinese consumers. This study offers insights on how to attract and retain customers' attentions for advertisers that use static advertisement on various websites or ad networks. In the second part of the dissertation, we conduct a face-tracking study where we investigate the relation between experiment participants' emotional responseswhile watching comedy movie trailers and their watching intentions to the actual movies. Viewers' facial expressions are collected in real-time and converted to emo- tional responses with algorithms based on facial coding system. To analyze the data, we propose to use a joint modeling method that link viewers' longitudinal emotion measurements and their watching intentions. This research provides recommenda- tions to filmmakers on how to improve the effectiveness of movie trailers, and how to boost audiences' desire to watch the movies.

  19. Gamma and Ion-Beam Irradiation of DNA: Free Radical Mechanisms, Electron Effects, and Radiation Chemical Track Structure

    Science.gov (United States)

    Sevilla, Michael D.; Becker, David; Kumar, Anil; Adhikary, Amitava

    2016-01-01

    The focus of our laboratory’s investigation is to study the direct-type DNA damage mechanisms resulting from γ-ray and ion-beam radiation-induced free radical processes in DNA which lead to molecular damage important to cellular survival. This work compares the results of low LET (γ−) and high LET (ion-beam) radiation to develop a chemical track structure model for ion-beam radiation damage to DNA. Recent studies on protonation states of cytosine cation radicals in the N1-substituted cytosine derivatives in their ground state and 5-methylcytosine cation radicals in ground as well as in excited state are described. Our results exhibit a radical signature of excitations in 5-methylcytosine cation radical. Moreover, our recent theoretical studies elucidate the role of electron-induced reactions (low energy electrons (LEE), presolvated electrons (epre−), and aqueous (or, solvated) electrons (eaq−)). Finally DFT calculations of the ionization potentials of various sugar radicals show the relative reactivity of these species. PMID:27695205

  20. Comprehensive track-structure based evaluation of DNA damage by light ions from radiotherapy-relevant energies down to stopping

    Science.gov (United States)

    Friedland, W.; Schmitt, E.; Kundrát, P.; Dingfelder, M.; Baiocco, G.; Barbieri, S.; Ottolenghi, A.

    2017-01-01

    Track structures and resulting DNA damage in human cells have been simulated for hydrogen, helium, carbon, nitrogen, oxygen and neon ions with 0.25–256 MeV/u energy. The needed ion interaction cross sections have been scaled from those of hydrogen; Barkas scaling formula has been refined, extending its applicability down to about 10 keV/u, and validated against established stopping power data. Linear energy transfer (LET) has been scored from energy deposits in a cell nucleus; for very low-energy ions, it has been defined locally within thin slabs. The simulations show that protons and helium ions induce more DNA damage than heavier ions do at the same LET. With increasing LET, less DNA strand breaks are formed per unit dose, but due to their clustering the yields of double-strand breaks (DSB) increase, up to saturation around 300 keV/μm. Also individual DSB tend to cluster; DSB clusters peak around 500 keV/μm, while DSB multiplicities per cluster steadily increase with LET. Remarkably similar to patterns known from cell survival studies, LET-dependencies with pronounced maxima around 100–200 keV/μm occur on nanometre scale for sites that contain one or more DSB, and on micrometre scale for megabasepair-sized DNA fragments. PMID:28345622

  1. Theoretical analysis of polarized structure functions

    International Nuclear Information System (INIS)

    Altarelli, G.; ); Ball, R.D.; Forte, S.; Ridolfi, G.

    1998-01-01

    We review the analysis of polarized structure function data using perturbative QCD and NLO We use the most recent experimental data to obtain updated results for polarized parton distributions, first moments and the strong coupling. We also discuss several theoretical issues involving in this analysis and in the interpretation of its results. Finally, we compare our results with other similar analyses in the recent literature. (author)

  2. Theoretical Analysis of Polarized Structure Functions

    CERN Document Server

    Altarelli, Guido; Forte, Stefano; Ridolfi, G

    1998-01-01

    We review the analysis of polarized structure function data using perturbative QCD at next-to-leading order. We use the most recent experimental data to obtain updated results for polarized parton distributions, first moments and the strong coupling. We also discuss several theoretical issues involved in this analysis and in the interpretation of its results. Finally, we compare our results with other similar analyses in the recent literature.

  3. Structural Analysis of Field Sprayer Booms

    OpenAIRE

    KOÇ, Caner

    2017-01-01

    In this paper, structural analysis of a 21 meters wide field sprayer boom, designed for precision agricultureapplications, was conducted with finite element analysis. G-programming language, a data acquisition board andan inductive force transducer were used to measure the forces acting on the boom arms. An experimental setup,developed in a laboratory environment, was able to measure and record various forces in 5 miliseconds intervals.An ANSYS model was developed to analyze the forces record...

  4. Evaluation of Grid Modification Methods for On- and Off-Track Sonic Boom Analysis

    Science.gov (United States)

    Nayani, Sudheer N.; Campbell, Richard L.

    2013-01-01

    Grid modification methods have been under development at NASA to enable better predictions of low boom pressure signatures from supersonic aircraft. As part of this effort, two new codes, Stretched and Sheared Grid - Modified (SSG) and Boom Grid (BG), have been developed in the past year. The CFD results from these codes have been compared with ones from the earlier grid modification codes Stretched and Sheared Grid (SSGRID) and Mach Cone Aligned Prism (MCAP) and also with the available experimental results. NASA's unstructured grid suite of software TetrUSS and the automatic sourcing code AUTOSRC were used for base grid generation and flow solutions. The BG method has been evaluated on three wind tunnel models. Pressure signatures have been obtained up to two body lengths below a Gulfstream aircraft wind tunnel model. Good agreement with the wind tunnel results have been obtained for both on-track and off-track (up to 53 degrees) cases. On-track pressure signatures up to ten body lengths below a Straight Line Segmented Leading Edge (SLSLE) wind tunnel model have been extracted. Good agreement with the wind tunnel results have been obtained. Pressure signatures have been obtained at 1.5 body lengths below a Lockheed Martin aircraft wind tunnel model. Good agreement with the wind tunnel results have been obtained for both on-track and off-track (up to 40 degrees) cases. Grid sensitivity studies have been carried out to investigate any grid size related issues. Methods have been evaluated for fully turbulent, mixed laminar/turbulent and fully laminar flow conditions.

  5. Tracking of accelerometry-measured physical activity during childhood: ICAD pooled analysis

    Directory of Open Access Journals (Sweden)

    Kwon Soyang

    2012-06-01

    Full Text Available Abstract Background Understanding of physical activity (PA tracking during childhood is important to predict PA behaviors and design appropriate interventions. We compared tracking of PA according to PA level and type of day (weekday/weekend in a pool of five children’s cohort studies. Methods Data from ALSPAC, CLAN, Iowa Bone Development Study, HEAPS, PEACH were extracted from the International Children’s Accelerometry Database (ICAD, resulting in 5,016 participants with age, gender, and accelerometry data at both baseline and follow-up (mean age: 10.3 years at baseline, 12.5 years at follow-up. Daily minutes spent in moderate- and vigorous-intensity PA (MVPA and vigorous-intensity PA (VPA was categorized into quintiles. Multinomial logistic regression models were fit to predict follow-up (MVPA from baseline (MVPA (reference: 20-  Results For the weekday, VPA tracking for boys with high baseline VPA was higher than boys with low baseline VPA (ORs: 3.9 [95% CI: 3.1, 5.0] vs. 2.1 [95% CI: 1.6, 2.6]. Among girls, high VPA was less stable when compared low VPA (ORs: 1.8 [95% CI: 1.4, 2.2] vs. 2.6 [95% CI: 2.1, 3.2]. The pattern was similar for MVPA among girls (ORs: 1.6 [95% CI: 1.2, 2.0] vs. 2.8 [95% CI: 2.3, 3.6]. Overall, tracking was lower for the weekend. Conclusions PA tracking was higher on the weekday than the weekend, and among inactive girls than active girls. The PA “routine” of weekdays should be used to help children establish healthy PA patterns. Supports for PA increase and maintenance of girls are needed.

  6. Analysis of Load-Carrying Capacity for Redundant Free-Floating Space Manipulators in Trajectory Tracking Task

    Directory of Open Access Journals (Sweden)

    Qingxuan Jia

    2014-01-01

    Full Text Available The aim of this paper is to analyze load-carrying capacity of redundant free-floating space manipulators (FFSM in trajectory tracking task. Combined with the analysis of influential factors in load-carrying process, evaluation of maximum load-carrying capacity (MLCC is described as multiconstrained nonlinear programming problem. An efficient algorithm based on repeated line search within discontinuous feasible region is presented to determine MLCC for a given trajectory of the end-effector and corresponding joint path. Then, considering the influence of MLCC caused by different initial configurations for the starting point of given trajectory, a kind of maximum payload initial configuration planning method is proposed by using PSO algorithm. Simulations are performed for a particular trajectory tracking task of the 7-DOF space manipulator, of which MLCC is evaluated quantitatively. By in-depth research of the simulation results, significant gap between the values of MLCC when using different initial configurations is analyzed, and the discontinuity of allowable load-carrying capacity is illustrated. The proposed analytical method can be taken as theoretical foundation of feasibility analysis, trajectory optimization, and optimal control of trajectory tracking task in on-orbit load-carrying operations.

  7. The Impact of the Geometrical Structure of the DNA on Parameters of the Track-Event Theory for Radiation Induced Cell Kill.

    Directory of Open Access Journals (Sweden)

    Uwe Schneider

    Full Text Available When fractionation schemes for hypofractionation and stereotactic body radiotherapy are considered, a reliable cell survival model at high dose is needed for calculating doses of similar biological effectiveness. An alternative to the LQ-model is the track-event theory which is based on the probabilities for one- and two two-track events. A one-track-event (OTE is always represented by at least two simultaneous double strand breaks. A two-track-event (TTE results in one double strand break. Therefore at least two two-track-events on the same or different chromosomes are necessary to produce an event which leads to cell sterilization. It is obvious that the probabilities of OTEs and TTEs must somehow depend on the geometrical structure of the chromatin. In terms of the track-event theory the ratio ε of the probabilities of OTEs and TTEs includes the geometrical dependence and is obtained in this work by simple Monte Carlo simulations.For this work it was assumed that the anchors of loop forming chromatin are most sensitive to radiation induced cell deaths. Therefore two adjacent tetranucleosomes representing the loop anchors were digitized. The probability ratio ε of OTEs and TTEs was factorized into a radiation quality dependent part and a geometrical part: ε = εion ∙ εgeo. εgeo was obtained for two situations, by applying Monte Carlo simulation for DNA on the tetranucleosomes itself and for linker DNA. Low energy electrons were represented by randomly distributed ionizations and high energy electrons by ionizations which were simulated on rays. εion was determined for electrons by using results from nanodosimetric measurements. The calculated ε was compared to the ε obtained from fits of the track event model to 42 sets of experimental human cell survival data.When the two tetranucleosomes are in direct contact and the hits are randomly distributed εgeo and ε are 0.12 and 0.85, respectively. When the hits are simulated on rays

  8. Measurement of refractive index by nanoparticle tracking analysis reveals heterogeneity in extracellular vesicles

    Directory of Open Access Journals (Sweden)

    Chris Gardiner

    2014-11-01

    Full Text Available Introduction: Optical techniques are routinely used to size and count extracellular vesicles (EV. For comparison of data from different methods and laboratories, suitable calibrators are essential. A suitable calibrator must have a refractive index (RI as close to that of EV as possible but the RI of EV is currently unknown. To measure EV, RI requires accurate knowledge of size and light scattering. These are difficult to measure as most EVs cannot be resolved by light microscopy and their diameter is smaller than the wavelength of visible light. However, nanoparticle tracking analysis (NTA provides both size and relative light scattering intensity (rLSI values. We therefore sought to determine whether it was possible to use NTA to measure the RI of individual EVs. Methods: NTA was used to measure the rLSI and size of polystyrene and silica microspheres of known size and RI (1.470 and 1.633, respectively and of EV isolated from a wide range of cells. We developed software, based on Mie scattering code, to calculate particle RI from the rLSI data. This modelled theoretical scattering intensities for polystyrene and silica microspheres of known size (100 and 200 nm and RI. The model was verified using data from the polystyrene and silica microspheres. Size and rLSI data for each vesicle were processed by the software to generate RI values. Results: The following modal RI measurements were obtained: fresh urinary EV 1.374, lyophilised urinary EV 1.367, neuroblastoma EV 1.393, blood EV 1.398, EV from activated platelets 1.390, small placental EV 1.364–1.375 and 1.398–1.414 for large placental EV (>200 nm. Large placental EV had a significantly higher RI than small placental EV (p1.40 were observed for some large (>200 nm microvesicles. Conclusion: This method for measuring EV RI will be useful for developing appropriate calibrators for EV measurement.

  9. Thermal history of the Tiereketi batholith in Altay Mountains, northern Xinjiang: evidence from apatite fission track analysis

    International Nuclear Information System (INIS)

    Yuan Wanming; Dong Jinquan; Tang Yunhui; Bao Zengkuan

    2003-01-01

    The result of fission track analysis of 4 apatite samples collected from Tiereketi granite-batholith in Altay Mountains, northern Xinjiang, shows a three stages of thermal history. First, before 120 Ma the temperature was 105-130∼90-120; second, the temperature quite ranged from 90-120 to 20-65 during 60-120 Ma and third, it was 20-65∼12-18 since 60 Ma. The 60~90 Ma was a rapid cooling and uplift stage, with cooling rate of 2.5-3.23/Ma and uplift rate of 3.3-107.7 m/Ma. The rapid uplift during the 60-120 Ma and the apatite fission track age of 80.4-91.9 Ma indicate that there was a intracontinental press-orogeny in about 60-120 Ma, which is a new understand. (authors)

  10. Analysis of quantum structures using ion microbeam

    International Nuclear Information System (INIS)

    Chakraborty, Purushottam

    2007-01-01

    The fundamental challenge in surface analysis is the quantitative characterization of the elemental composition and chemical structure of surfaces with the highest sensitivity and spatial resolution. The flexibility of sputter sectioning, in combination with the principal advantages of the mass spectrometric techniques, such as large dynamic ranges both in the mass separation and detection systems, has enabled the dynamic Secondary Ion Mass spectrometry (SIMS) to be an extremely sensitive technique for the analysis of solid surfaces and thin films. SIMS depth profiling is now possible at depth resolutions down to ∼ 2 nm with quantification data obtainable from the topmost atomic layer onwards into the depth. The interface widths obtained from depth profiles are related to the induced surface roughness at the interfaces. With optimized ion bombardment conditions, like extremely low beam currents (down to ∼ 10 nA), low ion energies (below 1 keV) and appropriate impact angles, ultra-high resolution SIMS depth profiling has enabled interfacial composition analysis of ultra-thin films, quantum wells, hetero-structures, etc. and complex low-dimensional structures with high precision and repeatability. The talk will address some of our recent experiments on high depth- resolution SIMS analysis of Bragg mirrors, quantum wells and interface alloying in metallic multilayer structures. (author)

  11. Term Structure Analysis with Big Data

    DEFF Research Database (Denmark)

    Andreasen, Martin Møller; Christensen, Jens H.E.; Rudebusch, Glenn D.

    Analysis of the term structure of interest rates almost always takes a two-step approach. First, actual bond prices are summarized by interpolated synthetic zero-coupon yields, and second, a small set of these yields are used as the source data for further empirical examination. In contrast, we...

  12. Synthesis, crystal structure, thermal analysis and dielectric

    Indian Academy of Sciences (India)

    Annual Meetings · Mid Year Meetings · Discussion Meetings · Public Lectures · Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Journals; Bulletin of Materials Science; Volume 39; Issue 5. Synthesis, crystal structure, thermal analysis and dielectric properties of two mixed trichlorocadmiates (II).

  13. Structural reliability analysis and seismic risk assessment

    International Nuclear Information System (INIS)

    Hwang, H.; Reich, M.; Shinozuka, M.

    1984-01-01

    This paper presents a reliability analysis method for safety evaluation of nuclear structures. By utilizing this method, it is possible to estimate the limit state probability in the lifetime of structures and to generate analytically the fragility curves for PRA studies. The earthquake ground acceleration, in this approach, is represented by a segment of stationary Gaussian process with a zero mean and a Kanai-Tajimi Spectrum. All possible seismic hazard at a site represented by a hazard curve is also taken into consideration. Furthermore, the limit state of a structure is analytically defined and the corresponding limit state surface is then established. Finally, the fragility curve is generated and the limit state probability is evaluated. In this paper, using a realistic reinforced concrete containment as an example, results of the reliability analysis of the containment subjected to dead load, live load and ground earthquake acceleration are presented and a fragility curve for PRA studies is also constructed

  14. Earthquake response analysis considering structure-soil-structure interaction

    International Nuclear Information System (INIS)

    Shiomi, T.; Takahashi, K.; Oguro, E.

    1981-01-01

    This paper proposes a numerical method of earthquake response analysis considering the structure-soil-structure interaction between two adjacent buildings. In this paper an analytical study is presented in order to show some typical features of coupling effects of two reactor buildings of the BWR-type nuclear power plant. The technical approach is a kind of substructure method, which at first evaluates the compliance properties with the foundation-soil-foundation interaction and then uses the compliance in determining seismic responses of two super-structures during earthquake motions. For this purpose, it is assumed that the soil medium is an elastic half space for modeling and that the rigidity of any type of structures such as piping facilities connecting the adjacent buildings is negligible. The technical approach is mainly based on the following procedures. Supersturcture stiffness is calculated by using the method which has been developed in our laboratory based on the Thin-Wall Beam Theory. Soil stiffness is expressed by a matrix with 12 x 12 elements as a function of frequency, which is calculated using the soil compliance functions proposed in Dr. Tajimi's Theory. These stiffness values may be expressed by complex numbers for modeling the damping mechanism of superstructures. We can solve eigenvalue problems with frequency dependent stiffness and the large-scale matrix using our method which is based on condensing the matrix to the suitable size by Rayleigh-Ritz method. Earthquake responses can be solved in the frequency domain by Fourier Transform. (orig./RW)

  15. Uncertain structural dynamics of aircraft panels and fuzzy structures analysis

    Science.gov (United States)

    Sparrow, Victor W.; Buehrle, Ralph D.

    2002-11-01

    Aircraft fuselage panels, seemingly simple structures, are actually complex because of the uncertainty of the attachments of the frame stiffeners and longitudinal stringers. It is clearly important to understand the dynamics of these panels because of the subsequent radiation into the passenger cabin, even when complete information is not available for all portions of the finite-element model. Over the last few years a fuzzy structures analysis (FSA) approach has been undertaken at Penn State and NASA Langley to quantify the uncertainty in modeling aircraft panels. A new MSC.Nastran [MSC.Software Corp. (Santa Ana, CA)] Direct Matrix Abstraction Program (DMAP) code was written and tested [AIAA paper 2001-1320, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., Seattle, WA, 16 April 2001] and was applied to simple fuselage panel models [J. Acoust. Soc. Am. 109, 2410(A) (2001)]. Recently the work has focused on understanding the dynamics of a realistic aluminum fuselage panel, typical of today's aircraft construction. This presentation will provide an overview of the research and recent results will be given for the fuselage panel. Comparison between experiments and the FSA results will be shown for different fuzzy input parameters. [Work supported by NASA Research Cooperative Agreement NCC-1-382.

  16. Particle orbit tracking on a parallel computer: Hypertrack

    International Nuclear Information System (INIS)

    Cole, B.; Bourianoff, G.; Pilat, F.; Talman, R.

    1991-05-01

    A program has been written which performs particle orbit tracking on the Intel iPSC/860 distributed memory parallel computer. The tracking is performed using a thin element approach. A brief description of the structure and performance of the code is presented, along with applications of the code to the analysis of accelerator lattices for the SSC. The concept of ''ensemble tracking'', i.e. the tracking of ensemble averages of noninteracting particles, such as the emittance, is presented. Preliminary results of such studies will be presented. 2 refs., 6 figs

  17. LHCb on track

    CERN Document Server

    2006-01-01

    On 7 and 8 June 2006, the last large component of the LHCb experiment was lowered into the cavern. This 10-tonne, 18-metre long metal structure known as 'the bridge' will support the LHCb tracking system.

  18. Track Loading Vehicle - TLV

    Data.gov (United States)

    Federal Laboratory Consortium — The TLV is designed to apply forces close to the strength limits of the rails and other track structure components, such as ties, rail fasteners, and ballast, while...

  19. Numerical Limit Analysis of Precast Concrete Structures

    DEFF Research Database (Denmark)

    Herfelt, Morten Andersen

    . The strength and efficiency of the presented framework are demonstrated by two real size examples, a two-dimensional precast shear wall and a three-dimensional precast concrete stairwell. The analysis shows that the framework is capable of modelling complex precast concrete structures efficiently. Moreover......Precast concrete elements are widely used in the construction industry as they provide a number of advantages over the conventional in-situ cast concrete structures. Joints cast on the construction site are needed to connect the precast elements, which poses several challenges. Moreover....... The scope is to be able to model entire precast concrete structures while accounting for the local behaviour of the joints. The in-situ cast joints are crucial to the capacity of precast concrete structures, however, the behaviour of joints is in practice assessed by simple, empirical design formulas...

  20. Conditions for veining in the Barrandian Basin (Lower Palaeozoic), Czech Republic: evidence from fluid inclusion and apatite fission track analysis

    Science.gov (United States)

    Suchy, V.; Dobes, P.; Filip, J.; Stejskal, M.; Zeman, A.

    2002-04-01

    of its hydrocarbons. This implies that the organic fluids in the fractures may have been partly influenced by heating associated with igneous intrusions that are hidden below the surface. Subvertical N-S-striking veins represent the most recent fracturing event(s). Some of these veins are only a few millimeters thick and sparsely mineralised with thin leaf-like quartz crystals that contain tiny blue and yellow-orange-fluorescing hydrocarbon inclusions. Most of the N-S veins, however, occur as thick calcite veins that generally crystallised at 70 °C or less from H 2O-NaCl solutions of variable salinity with admixture of petroleum. The origin of these fluids is interpreted in terms of deeply circulating meteoric waters that partially mixed with deep basinal fluids. Wider structural considerations combined with fission-track analysis of adjacent host sediments suggest that N-S veins formed during post-Mesozoic uplift of the area, probably in response to major Tertiary Alpine deformations transmitted far into the Bohemian Massif.

  1. Relationships of radiation track structure to biological effect: a re-interpretation of the parameters of the Katz model

    International Nuclear Information System (INIS)

    Goodhead, D.T.

    1989-01-01

    The Katz track-model of cell inactivation has been more successful than any other biophysical model in fitting and predicting inactivation of mammalian cells exposed to a wide variety of ionising radiations. Although the model was developed as a parameterised phenomenological description, without necessarily implying any particular mechanistic processes, the present analysis attempts to interpret it and thereby benefit further from its success to date. A literal interpretation of the parameters leads to contradictions with other experimental and theoretical information, especially since the fitted parameters imply very large (> ∼ 4 μm) subcellular sensitive sites which each require very large amounts (> ∼ 100 keV) of energy deposition in order to be inactivated. Comparisons of these fits with those for cell mutation suggest a re-interpretation in terms of (1) very much smaller sites and (2) a clearer distinction between the ion-kill and γ-kill modes of inactivation. It is suggested that this re-interpretation may be able to guide future development of the phenomenological Katz model and also parameterisation of mechanistic biophysical models. (author)

  2. Hidden communicative competence: case study evidence using eye-tracking and video analysis.

    Science.gov (United States)

    Grayson, Andrew; Emerson, Anne; Howard-Jones, Patricia; O'Neil, Lynne

    2012-01-01

    A facilitated communication (FC) user with an autism spectrum disorder produced sophisticated texts by pointing, with physical support, to letters on a letterboard while their eyes were tracked and while their pointing movements were video recorded. This FC user has virtually no independent means of expression, and is held to have no literacy skills. The resulting data were subjected to a variety of analyses aimed at describing the relationship between the FC user's looking and pointing behaviours, in order to make inferences about the complex question of 'authorship'. The eye-tracking data present a challenge to traditional 'facilitator influence' accounts of authorship, and are consistent with the proposition that this FC user does indeed author the sophisticated texts that are attributed to him; he looks for longer at to-be-typed letters before typing them, and looks ahead to subsequent letters of words before the next letter of the word is typed.

  3. A study of the effect of gamma and laser irradiation on the thermal, optical and structural properties of CR-39 nuclear track detector

    Science.gov (United States)

    Nouh, S. A.; Atta, M. R.; El-Melleegy, W. M.

    2004-08-01

    A comparative study of the effect of gamma and laser irradiation on the thermal, optical and structural properties of the CR-39 diglycol carbonate solid state nuclear track detector has been carried out. Samples from CR-39 polymer were classified into two main groups: the first group was irradiated by gamma rays with doses at levels between 20 and 300 kGy, whereas the second group was exposed to infrared laser radiation with energy fluences at levels between 0.71 and 8.53 J/cm(2). Non-isothermal studies were carried out using thermogravimetry, differential thermogravimetry and differential thermal analysis to obtain activation energy of decomposition and transition temperatures for the non-irradiated and all irradiated CR-39 samples. In addition, optical and structural property studies were performed on non-irradiated and irradiated CR-39 samples using refractive index and X-ray diffraction measurements. Variation in the onset temperature of decomposition T-o, activation energy of decomposition E-a, melting temperature T-m, refractive index n and the mass fraction of the amorphous phase after gamma and laser irradiation were studied. It was found that many changes in the thermal, optical and structural properties of the CR-39 polymer could be produced by gamma irradiation via degradation and cross-linking mechanisms. Also, the gamma dose has an advantage of increasing the correlation between thermal stability of the CR-39 polymer and bond formation created by the ionizing effect of gamma radiation. On the other hand, higher laser-energy fluences in the range 4.27-8.53 J/cm(2) decrease the melting temperature of the CR-39 polymer and this is most suitable for applications requiring molding of the polymer at lower temperatures.

  4. Methods of quantitative and qualitative analysis of bird migration with a tracking radar

    Science.gov (United States)

    Bruderer, B.; Steidinger, P.

    1972-01-01

    Methods of analyzing bird migration by using tracking radar are discussed. The procedure for assessing the rate of bird passage is described. Three topics are presented concerning the grouping of nocturnal migrants, the velocity of migratory flight, and identification of species by radar echoes. The height and volume of migration under different weather conditions are examined. The methods for studying the directions of migration and the correlation between winds and the height and direction of migrating birds are presented.

  5. Design and analysis of microprocessor-controlled peak-power-tracking system

    Science.gov (United States)

    Huynh, Phuong; Cho, Bo H.

    Analyses and designs of a peak-power-tracking system using microprocessor control are performed. Large-signal stability and dynamics of the system for various modes of operation are analyzed based on qualitative graphical representations of dc load lines at various interfaces of the system. Small-signal stability around the equilibrium points is also analyzed. Predictions from the analyses are verified by experimental results.

  6. Analysis of the Effect of Radio Frequency Interference on Repeat Track Airborne InSAR System

    Directory of Open Access Journals (Sweden)

    Ding Bin

    2012-03-01

    Full Text Available The SAR system operating at low frequency is susceptible to Radio Frequency Interference (RFI from television station, radio station, and some other civil electronic facilities. The presence of RFI degrades the SAR image quality, and obscures the targets in the scene. Furthermore, RFI can cause interferometric phase error in repeat track InSAR system. In order to analyze the effect of RFI on interferometric phase of InSAR, real measured RFI signal are added on cone simulated SAR echoes. The imaging and interferometric processing results of both the RFI-contaminated and raw data are given. The effect of real measured RFI signal on repeat track InSAR system is analyzed. Finally, the imaging and interferometric processing results of both with and without RFI suppressed of the P band airborne repeat track InSAR real data are presented, which demonstrates the efficiency of the RFI suppression method in terms of decreasing the interferometric phase errors caused by RFI.

  7. Rock Falls Impacting Railway Tracks: Detection Analysis through an Artificial Intelligence Camera Prototype

    Directory of Open Access Journals (Sweden)

    Andrea Fantini

    2017-01-01

    Full Text Available During the last few years, several approaches have been proposed to improve early warning systems for managing geological risk due to landslides, where important infrastructures (such as railways, highways, pipelines, and aqueducts are exposed elements. In this regard, an Artificial intelligence Camera Prototype (AiCP for real-time monitoring has been integrated in a multisensor monitoring system devoted to rock fall detection. An abandoned limestone quarry was chosen at Acuto (central Italy as test-site for verifying the reliability of the integrated monitoring system. A portion of jointed rock mass, with dimensions suitable for optical monitoring, was instrumented by extensometers. One meter of railway track was used as a target for fallen blocks and a weather station was installed nearby. Main goals of the test were (i evaluating the reliability of the AiCP and (ii detecting rock blocks that reach the railway track by the AiCP. At this aim, several experiments were carried out by throwing rock blocks over the railway track. During these experiments, the AiCP detected the blocks and automatically transmitted an alarm signal.

  8. Development of Viscoelastic Multi-Body Simulation and Impact Response Analysis of a Ballasted Railway Track under Cyclic Loading

    Directory of Open Access Journals (Sweden)

    Daisuke Nishiura

    2017-06-01

    Full Text Available Simulation of a large number of deformable bodies is often difficult because complex high-level modeling is required to address both multi-body contact and viscoelastic deformation. This necessitates the combined use of a discrete element method (DEM and a finite element method (FEM. In this study, a quadruple discrete element method (QDEM was developed for dynamic analysis of viscoelastic materials using a simpler algorithm compared to the standard FEM. QDEM easily incorporates the contact algorithm used in DEM. As the first step toward multi-body simulation, the fundamental performance of QDEM was investigated for viscoelastic analysis. The amplitude and frequency of cantilever elastic vibration were nearly equal to those obtained by the standard FEM. A comparison of creep recovery tests with an analytical solution showed good agreement between them. In addition, good correlation between the attenuation degree and the real physical viscosity was confirmed for viscoelastic vibration analysis. Therefore, the high accuracy of QDEM in the fundamental analysis of infinitesimal viscoelastic deformations was verified. Finally, the impact response of a ballast and sleeper under cyclic loading on a railway track was analyzed using QDEM as an application of deformable multi-body dynamics. The results showed that the vibration of the ballasted track was qualitatively in good agreement with the actual measurements. Moreover, the ballast layer with high friction reduced the ballasted track deterioration. This study suggests that QDEM, as an alternative to DEM and FEM, can provide deeper insights into the contact dynamics of a large number of deformable bodies.

  9. Multi-GPU based framework for real-time motion analysis and tracking in multi-user scenarios

    Directory of Open Access Journals (Sweden)

    Sidi Ahmed Mahmoudi

    2015-02-01

    Full Text Available Video processing algorithms present a necessary tool for various domains related to computer vision such as motion tracking, event detection and localization in multi-user scenarios (crowd videos, mobile camera, scenes with noise, etc.. However, the new video standards, especially those in high definitions require more computation since their treatment is applied on large video frames. As result, the current implementations, even running on modern hardware, cannot provide a real-time processing (25 frames per second, fps. Several solutions have been proposed to overcome this constraint, by exploiting graphic processing units (GPUs. Although they exploit GPU platforms, they are not able to provide a real-time processing of high definition video sequences. In this work, we propose a new framework that enables an efficient exploitation of single and multiple GPUs, in order to achieve real-time processing of Full HD or even 4K video standards. Moreover, the framework includes several GPU based primitive functions related to motion analysis and tracking methods, such as silhouette extraction, contours extraction, corners detection and tracking using optical flow estimation. Based on this framework, we developed several real-time and GPU based video processing applications such as motion detection using moving camera, event detection and event localization

  10. Particle tracking

    CERN Document Server

    Safarík, K; Newby, J; Sørensen, P

    2002-01-01

    In this lecture we will present a short historical overview of different tracking detectors. Then we will describe currently used gaseous and silicon detectors and their performance. In the second part we will discuss how to estimate tracking precision, how to design a tracker and how the track finding works. After a short description of the LHC the main attention is drawn to the ALICE experiment since it is dedicated to study new states in hadronic matter at the LHC. The ALICE tracking procedure is discussed in detail. A comparison to the tracking in ATLAS, CMS and LHCb is given. (5 refs).

  11. Analysis of fluid structural instability in water

    International Nuclear Information System (INIS)

    Piccirillo, N.

    1997-02-01

    Recent flow testing of stainless steel hardware in a high pressure/high temperature water environment produced an apparent fluid-structural instability. The source of instability was investigated by studying textbook theory and by performing NASTRAN finite element analyses. The modal analyses identified the mode that was being excited, but the flutter instability analysis showed that the design is stable if minimal structural damping is present. Therefore, it was suspected that the test hardware was the root cause of the instability. Further testing confirmed this suspicion

  12. Neutron structure analysis using neutron imaging plate

    International Nuclear Information System (INIS)

    Karasawa, Yuko; Minezaki, Yoshiaki; Niimura, Nobuo

    1997-01-01

    Neutron is complementary against X-ray and is dispensable for structure analysis. However, because of the lack of the neutron intensity, it was not so common as X-ray. In order to overcome the intensity problem, a neutron imaging plate (NIP) has been successfully developed. The NIP has opened the door of neutron structure biology, where all the hydrogen atoms and bound water molecules of protein are determined, and contributed to development of other fields such as neutron powder diffraction and neutron radiography, too. (author)

  13. Parallel processing of structural integrity analysis codes

    International Nuclear Information System (INIS)

    Swami Prasad, P.; Dutta, B.K.; Kushwaha, H.S.

    1996-01-01

    Structural integrity analysis forms an important role in assessing and demonstrating the safety of nuclear reactor components. This analysis is performed using analytical tools such as Finite Element Method (FEM) with the help of digital computers. The complexity of the problems involved in nuclear engineering demands high speed computation facilities to obtain solutions in reasonable amount of time. Parallel processing systems such as ANUPAM provide an efficient platform for realising the high speed computation. The development and implementation of software on parallel processing systems is an interesting and challenging task. The data and algorithm structure of the codes plays an important role in exploiting the parallel processing system capabilities. Structural analysis codes based on FEM can be divided into two categories with respect to their implementation on parallel processing systems. The first category codes such as those used for harmonic analysis, mechanistic fuel performance codes need not require the parallelisation of individual modules of the codes. The second category of codes such as conventional FEM codes require parallelisation of individual modules. In this category, parallelisation of equation solution module poses major difficulties. Different solution schemes such as domain decomposition method (DDM), parallel active column solver and substructuring method are currently used on parallel processing systems. Two codes, FAIR and TABS belonging to each of these categories have been implemented on ANUPAM. The implementation details of these codes and the performance of different equation solvers are highlighted. (author). 5 refs., 12 figs., 1 tab

  14. Thermal and tectonic history of the Ordos Basin, China: Evidence from apatite fission track analysis, vitrinite reflectance, and K-Ar dating

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Meng-Wei; Behr, H.J.; Ahrendt, H.; Wemmer, K. [Univ. of Goettingen (Germany); Zhan-Li Ren; Zhong-Yuan Zhao [Northwest Univ., Xi`an (China)

    1996-07-01

    Apatite fission track analysis, vitrinite reflectance data, and K-Ar dating of Permian-Carboniferous and Mesozoic core samples have been successfully integrated to reconstruct the thermal and tectonic history of the Ordos basin, China. Apatite fission track ages of Carboniferous-Jurassic sedimentary rocks range between 3 and 137 Ma, and are significantly younger than the stratigraphic ages. Confined fission track lengths demonstrate exclusively mixed length distribution, indicating complex thermal history. The data suggest that the samples must have all experienced higher paleotemperatures in the past. Mean virtinite reflectance values (R{sub o}) of the Triassic rocks range from 0.61 to 1.06%, giving a high coalification gradient of 0.36%/km and suggesting a high paleothermal gradient of 57{degrees}C/km. Permian-Carboniferous rocks have R{sub o} values on the order of 1.0-3.0%, and locally up to 4.0-6.0%. Some high R{sub o} values coincide with positive gravity and magnetic anomalies. K-Ar dating on Permian-Triassic samples reveals distinct illitization at 170-160 Ma, during which a thermal event occurred due to subsurface magmatic intrusion related to the early Yanshanian movement. The petroleum source rocks of the Upper Triassic experienced peak temperatures ranging form 90 to 160{degrees}C, corresponding to the oil window, and Permian-Carboniferous source rocks were heated to more than 150{degrees}C, passing through and out of the gas window. Due to rapid uplift and erosion in response to the rise of the Qinghai-Tibet plateau associated with the Asia-India collision and the Himalyan orogeny, cooling has taken place at least since approximately 23 Ma. The difference in the rate and amount of uplift between the eastern and western parts of the basin resulted in differential uplift and the present-day structural pattern of the basin.

  15. Structural Loads Analysis for Wave Energy Converters

    Energy Technology Data Exchange (ETDEWEB)

    van Rij, Jennifer A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Guo, Yi [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-06-03

    This study explores and verifies the generalized body-modes method for evaluating the structural loads on a wave energy converter (WEC). Historically, WEC design methodologies have focused primarily on accurately evaluating hydrodynamic loads, while methodologies for evaluating structural loads have yet to be fully considered and incorporated into the WEC design process. As wave energy technologies continue to advance, however, it has become increasingly evident that an accurate evaluation of the structural loads will enable an optimized structural design, as well as the potential utilization of composites and flexible materials, and hence reduce WEC costs. Although there are many computational fluid dynamics, structural analyses and fluid-structure-interaction (FSI) codes available, the application of these codes is typically too computationally intensive to be practical in the early stages of the WEC design process. The generalized body-modes method, however, is a reduced order, linearized, frequency-domain FSI approach, performed in conjunction with the linear hydrodynamic analysis, with computation times that could realistically be incorporated into the WEC design process.

  16. Present status of structural analysis computer programs

    International Nuclear Information System (INIS)

    Ikushima, Takeshi; Sanokawa, Konomo; Takeda, Hiroshi.

    1981-01-01

    The computer programs for the structural analysis by finite element method have been used widely, and the authors carried out the bench mark test on the computer programs for finite element method already. As the result, they pointed out a number of problems concerning the use of the computer programs for finite element method. In this paper, the details of their development, the analytical function and the examples of calculation are described centering around the versatile computer programs used for the previous study. As the versatile computer programs for finite element method, ANSYS developed by Swanson Analysis System Co., USA, ASKA developed by ISD, West Germany, MARC developed by MARC Analysis Research Institute, NASTRAN developed by NASA, USA, SAP-4 developed by University of California, ADINA developed by MIT, NEPSAP developed by Lockheed Missile Space Co., BERSAFE developed by CEGB, Great Britain, EPACA developed by Franklin Research Institute, USA, and CREEP-PLAST developed by GE are briefly introduced. As the exampled of calculation, the thermal elastoplastic creep analysis of a cylinder by ANSYS, the elastoplastic analysis of a pressure vessel by ASKA, the analysis of a plate with double cracks by MARC, the analysis of the buckling of a shallow arch by MSC-NASTRAN, and the elastoplastic analysis of primary cooling pipes by ADINA are explained. (Kako, I.)

  17. Phase analysis of amplitude binary mask structures

    Science.gov (United States)

    Puthankovilakam, Krishnaparvathy; Scharf, Toralf; Herzig, Hans Peter; Vogler, Uwe; Bramati, Arianna; Voelkel, Reinhard

    2016-03-01

    Shaping of light behind masks using different techniques is the milestone of the printing industry. The aerial image distribution or the intensity distribution at the printing distances defines the resolution of the structure after printing. Contrast and phase are the two parameters that play a major role in shaping of light to get the desired intensity pattern. Here, in contrast to many other contributions that focus on intensity, we discuss the phase evolution for different structures. The amplitude or intensity characteristics of the structures in a binary mask at different proximity gaps have been analyzed extensively for many industrial applications. But the phase evolution from the binary mask having OPC structures is not considered so far. The mask we consider here is the normal amplitude binary mask but having high resolution Optical Proximity Correction (OPC) structures for corners. The corner structures represent a two dimensional problem which is difficult to handle with simple rules of phase masks design and therefore of particular interest. The evolution of light from small amplitude structures might lead to high contrast by creating sharp phase changes or phase singularities which are points of zero intensity. We show the phase modulation at different proximity gaps and can visualize the shaping of light according to the phase changes. The analysis is done with an instrument called High Resolution Interference Microscopy (HRIM), a Mach-Zehnder interferometer that gives access to three-dimensional phase and amplitude images. The current paper emphasizes on the phase measurement of different optical proximity correction structures, and especially on corners of a binary mask.

  18. EURO AREA FISCAL STRUCTURES. A MULTIVARIATE ANALYSIS

    Directory of Open Access Journals (Sweden)

    HURDUZEU Gheorghe

    2014-07-01

    taxes on income of corporations and taxes on income of individuals and households and other current taxes. Actual social contributions were also split into employer’s actual contributions, employee’s social contributions and social contributions of self- and non-employed persons. As the primary data analysis revealed many differences between Euro Area member states, but also similarities concerning various fiscal aggregates, we completed the analysis through multidimensional analysis, with the aims of classifying Euro Area member states into subgroups with similar fiscal structures. Taking into consideration the above mentioned variables, we used cluster analysis in order to determine which member states have similar fiscal structures and which are the main similarities that characterize Euro Area in this respect.

  19. Seismic fragility analysis for NPP structural components

    International Nuclear Information System (INIS)

    Casciati, F.; Faravelli, L.

    1984-01-01

    Relationship between probability of failure and seismic intensity (fragility curves) summarize the results of the vulnerability analysis of a NPP structural component. The appropriate operative procedures for the evaluation of these fragility curves are discussed. The paper illustrates a general purpose computer code which includes two different probabilistic models for two different levels of sophistication in the fragility analysis. Attention is then focussed (i) on the mechanical aspects associated with the local strength estimation (ii) on the simulation of suitable artificial ground motions and (iii) on the definition of an appropriate measure of the seismic intensity. (Author) [pt

  20. Reliability Analysis of Elasto-Plastic Structures

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Sørensen, John Dalsgaard

    1984-01-01

    . Failure of this type of system is defined either as formation of a mechanism or by failure of a prescribed number of elements. In the first case failure is independent of the order in which the elements fail, but this is not so by the second definition. The reliability analysis consists of two parts...... are described and the two definitions of failure can be used by the first formulation, but only the failure definition based on formation of a mechanism by the second formulation. The second part of the reliability analysis is an estimate of the failure probability for the structure on the basis...

  1. A Structural Analysis of European Union Economy

    Directory of Open Access Journals (Sweden)

    Liliana DUGULEANĂ

    2016-09-01

    Full Text Available Based on the input-output analysis, the paper characterizes the structure of European economy in 2010 and 2011, on six main economic sectors. The sectoral structures of backward and forward linkages, and their absolute effects starting from the final demand, were compared with the real structures of sectors output, sectoral imports, sectoral value added, in 2011 face to 2010. The changes in final demand and in sectoral output can be analyzed in the propagation processes of the inter-sectoral economic flows, and allow us to know the behavior at macroeconomic level of European economy. The common economic policies at European level can be undertaken to keep the equilibrium between different sectors, to stimulate the sectors with high levels of productivity, to ensure the efficiency of using the resources, and the sustainability of economic development, which are the purposes of a smart development.

  2. Non Linear Seismic Analysis of Masonry Structures

    Directory of Open Access Journals (Sweden)

    Sirajuddin, M

    2011-12-01

    Full Text Available Nowadays, even though many new construction techniques have been introduced, masonry has got its own importance in building industry. Masonry structures fail miserably under lateral loading conditions like earth quakes and impact loads. The occurrence of recent earthquakes in India and in different parts of the world have highlighted that most of the loss of human lives and damage to property have been due to the collapse of masonry structures. Though an earthquake could not be prevented, the loss of life and property could be minimized, if necessary steps could be taken to reduce the damages on the existing masonry structures. This paper investigates the application ofNonlinear Seismic Analysis of a masonry building using ANSYS software and check the efficacy of retrofit measuresto protect the existing building.

  3. STRUCTURAL ANALYSIS OF SUPERCONDUCTING ACCELERATOR CAVITIES

    International Nuclear Information System (INIS)

    Schrage, D.

    2000-01-01

    The static and dynamic structural behavior of superconducting cavities for various projects was determined by finite element structural analysis. The β = 0.61 cavity shape for the Neutron Science Project was studied in detail and found to meet all design requirements if fabricated from five millimeter thick material with a single annular stiffener. This 600 MHz cavity will have a Lorentz coefficient of minus1.8 Hz/(Mv/meter) 2 and a lowest structural resonance of more than 100 Hz. Cavities at β = 0.48, 0.61, and 0.77 were analyzed for a Neutron Science Project concept which would incorporate 7-cell cavities. The medium and high beta cavities were found to meet all criteria but it was not possible to generate a β = 0.48 cavity with a Lorentz coefficient of less than minus3 Hz/(Mv/meter) 2

  4. Comparative Analysis of Several Real-Time Systems for Tracking People and/or Moving Objects using GPS

    OpenAIRE

    Radinski, Gligorcho; Mileva, Aleksandra

    2015-01-01

    When we talk about real-time systems for tracking people and/or moving objects using a Global Positioning System (GPS), there are several categories of such systems and the ways in which they work. Some uses additional hardware to extend the functionality of the offered opportunities, some are free, some are too complex and cost too much money. This paper aims to provide a clearer picture of several such systems and to show results from a comparative analysis of some popular systems for trac...

  5. Study of uranium mineralization in rock samples from marwat range bannu basin by fission track analysis technique

    International Nuclear Information System (INIS)

    Qureshi, A.Z.; Ullah, K.; Ullah, N.; Akram, M.

    2004-07-01

    The Geophysics Division, Atomic Energy Minerals Centre (AEMC), Lahore has planned a uranium exploration program in Marwat Range, Bannu Basin. In this connection 30 thin sections of rock samples, collected from four areas; namely, Darra Tang, Simukili, Karkanwal and Sheikhillah from Marwat Range, and one from Salt Range were provided to Nuclear Geology Group of Physics Research Division, PINSTECH for the study of nature and mechanism of uranium mineralization These studies are aimed to help in designing uranium exploration strategy by providing the loci of uranium sources in the Marwat and Salt Ranges. The samples have been studied using fission track analysis technique. (author)

  6. An Atomic Data and Analysis Structure

    International Nuclear Information System (INIS)

    Summers, Hugh P.

    2000-01-01

    The Atomic Data and Analysis Structure (ADAS) Project is a shared activity of a world-wide consortium of fusion and astrophysical laboratories directed at developing and maintaining a common approach to analysing and modelling the radiating properties of plasmas. The origin and objectives of ADAS and the organization of its codes and data collections outlined. Current special projects in the ADAS Project work-plans are listed and an illustration given of ADAS at work. (author)

  7. Structural analysis at aircraft conceptual design stage

    Science.gov (United States)

    Mansouri, Reza

    In the past 50 years, computers have helped by augmenting human efforts with tremendous pace. The aircraft industry is not an exception. Aircraft industry is more than ever dependent on computing because of a high level of complexity and the increasing need for excellence to survive a highly competitive marketplace. Designers choose computers to perform almost every analysis task. But while doing so, existing effective, accurate and easy to use classical analytical methods are often forgotten, which can be very useful especially in the early phases of the aircraft design where concept generation and evaluation demands physical visibility of design parameters to make decisions [39, 2004]. Structural analysis methods have been used by human beings since the very early civilization. Centuries before computers were invented; the pyramids were designed and constructed by Egyptians around 2000 B.C, the Parthenon was built by the Greeks, around 240 B.C, Dujiangyan was built by the Chinese. Persepolis, Hagia Sophia, Taj Mahal, Eiffel tower are only few more examples of historical buildings, bridges and monuments that were constructed before we had any advancement made in computer aided engineering. Aircraft industry is no exception either. In the first half of the 20th century, engineers used classical method and designed civil transport aircraft such as Ford Tri Motor (1926), Lockheed Vega (1927), Lockheed 9 Orion (1931), Douglas DC-3 (1935), Douglas DC-4/C-54 Skymaster (1938), Boeing 307 (1938) and Boeing 314 Clipper (1939) and managed to become airborne without difficulty. Evidencing, while advanced numerical methods such as the finite element analysis is one of the most effective structural analysis methods; classical structural analysis methods can also be as useful especially during the early phase of a fixed wing aircraft design where major decisions are made and concept generation and evaluation demands physical visibility of design parameters to make decisions

  8. New rheological model for concrete structural analysis

    International Nuclear Information System (INIS)

    Chern, J.C.

    1984-01-01

    Long time deformation is of interest in estimating stresses of the prestressed concrete reactor vessel, in predicting cracking due to shrinkage or thermal dilatation, and in the design of leak-tight structures. Many interacting influences exist among creep, shrinkage and cracking for concrete. An interaction which researchers have long observed, is that at simultaneous drying and loading, the deformation of a concrete structure under the combined effect is larger than the sum of the shrinkage deformation of the structure at no load and the deformation of the sealed structure. The excess deformation due to the difference between observed test data and conventional analysis is regarded as the Pickett Effect. A constitutive relation explaining the Pickett Effect and other similar superposition problems, which includes creep, shrinkage (or thermal dilation), cracking, aging was developed with an efficient time-step numerical algorithm. The total deformation in the analysis is the sum of strain due to elastic deformation and creep, cracking and shrinkage with thermal dilatation. Instead of a sudden stress reduction to zero after the attainment of the strength limit, the gradual strain-softening of concrete (a gradual decline of stress at increasing strain) is considered

  9. Video Analysis of Eddy Structures from Explosive Volcanic Eruptions

    Science.gov (United States)

    Fisher, M. A.; Kobs-Nawotniak, S. E.

    2013-12-01

    We present a method of analyzing turbulent eddy structures in explosive volcanic eruptions using high definition video. Film from the eruption of Sakurajima on 25 September 2011 was analyzed using a modified version of FlowJ, a Java-based toolbox released by National Institute of Health. Using the Lucas and Kanade algorithm with a Gaussian derivative gradient, it tracks the change in pixel position over a 23 image buffer to determine the optical flow. This technique assumes that the optical flow, which is the apparent motion of the pixels, is equivalent to the actual flow field. We calculated three flow fields per second for the duration of the video. FlowJ outputs flow fields in pixels per frame that were then converted to meters per second in Matlab using a known distance and video rate. We constructed a low pass filter using proper orthogonal decomposition (POD) and critical point analysis to identify the underlying eddy structure with boundaries determined by tracing the flow lines. We calculated the area of each eddy and noted its position over a series of velocity fields. The changes in shape and position were tracked to determine the eddy growth rate and overall eddy rising velocity. The eddies grow in size 1.5 times quicker than they rise vertically. Presently, this method is most successful in high contrast videos when there is little to no effect of wind on the plumes. Additionally, the pixel movement from the video images represents a 2D flow with no depth, while the actual flow is three dimensional; we are continuing to develop an algorithm that will allow 3D reprojection of the 2D data. Flow in the y-direction lessens the overall velocity magnitude as the true flow motion has larger y-direction component. POD, which only uses the pattern of the flow, and analysis of the critical points (points where flow is zero) is used to determine the shape of the eddies. The method allows for video recorded at remote distances to be used to study eruption dynamics

  10. Model track studies on fouled ballast using ground penetrating radar and multichannel analysis of surface wave

    Science.gov (United States)

    Anbazhagan, P.; Lijun, Su; Buddhima, Indraratna; Cholachat, Rujikiatkamjorn

    2011-08-01

    Ballast fouling is created by the breakdown of aggregates or outside contamination by coal dust from coal trains, or from soil intrusion beneath rail track. Due to ballast fouling, the conditions of rail track can be deteriorated considerably depending on the type of fouling material and the degree of fouling. So far there is no comprehensive guideline available to identify the critical degree of fouling for different types of fouling materials. This paper presents the identification of degree of fouling and types of fouling using non-destructive testing, namely seismic surface-wave and ground penetrating radar (GPR) survey. To understand this, a model rail track with different degree of fouling has been constructed in Civil engineering laboratory, University of Wollongong, Australia. Shear wave velocity obtained from seismic survey has been employed to identify the degree of fouling and types of fouling material. It is found that shear wave velocity of fouled ballast increases initially, reaches optimum fouling point (OFP), and decreases when the fouling increases. The degree of fouling corresponding after which the shear wave velocity of fouled ballast will be smaller than that of clean ballast is called the critical fouling point (CFP). Ground penetrating radar with four different ground coupled antennas (500 MHz, 800 MHz, 1.6 GHz and 2.3 GHz) was also used to identify the ballast fouling condition. It is found that the 800 MHz ground coupled antenna gives a better signal in assessing the ballast fouling condition. Seismic survey is relatively slow when compared to GPR survey however it gives quantifiable results. In contrast, GPR survey is faster and better in estimating the depth of fouling.

  11. Model-Based Real-Time Head Tracking

    Directory of Open Access Journals (Sweden)

    Ström Jacob

    2002-01-01

    Full Text Available This paper treats real-time tracking of a human head using an analysis by synthesis approach. The work is based on the Structure from Motion (SfM algorithm from Azarbayejani and Pentland (1995. We will analyze the convergence properties of the SfM algorithm for planar objects, and extend it to handle new points. The extended algorithm is then used for head tracking. The system tracks feature points in the image using a texture mapped three-dimensional model of the head. The texture is updated adaptively so that points in the ear region can be tracked when the user′s head is rotated far, allowing out-of-plane rotation of up to without losing track. The covariance of the - and the -coordinates are estimated and forwarded to the Kalman filter, making the tracker robust to occlusion. The system automatically detects tracking failure and reinitializes the algorithm using information gathered in the original initialization process.

  12. Industrial entrepreneurial network: Structural and functional analysis

    Science.gov (United States)

    Medvedeva, M. A.; Davletbaev, R. H.; Berg, D. B.; Nazarova, J. J.; Parusheva, S. S.

    2016-12-01

    Structure and functioning of two model industrial entrepreneurial networks are investigated in the present paper. One of these networks is forming when implementing an integrated project and consists of eight agents, which interact with each other and external environment. The other one is obtained from the municipal economy and is based on the set of the 12 real business entities. Analysis of the networks is carried out on the basis of the matrix of mutual payments aggregated over the certain time period. The matrix is created by the methods of experimental economics. Social Network Analysis (SNA) methods and instruments were used in the present research. The set of basic structural characteristics was investigated: set of quantitative parameters such as density, diameter, clustering coefficient, different kinds of centrality, and etc. They were compared with the random Bernoulli graphs of the corresponding size and density. Discovered variations of random and entrepreneurial networks structure are explained by the peculiarities of agents functioning in production network. Separately, were identified the closed exchange circuits (cyclically closed contours of graph) forming an autopoietic (self-replicating) network pattern. The purpose of the functional analysis was to identify the contribution of the autopoietic network pattern in its gross product. It was found that the magnitude of this contribution is more than 20%. Such value allows using of the complementary currency in order to stimulate economic activity of network agents.

  13. An accuracy analysis of Cyberknife tumor tracking radiotherapy according to unpredictable change of respiration

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Jung Min; Lee, Chang Yeol; Huh, Hyun Do; Kim, Wan Sun [Dept. of Radiation Oncology, Inha university hospital, Incheon (Korea, Republic of)

    2015-12-15

    Cyber-Knife tumor tracking system, based on the correlation relationship between the position of a tumor which moves in response to the real time respiratory cycle signal and respiration was obtained by the LED marker attached to the outside of the patient, the location of the tumor to predict in advance, the movement of the tumor in synchronization with the therapeutic device to track real-time tumor, is a system for treating. The purpose of this study, in the cyber knife tumor tracking radiation therapy, trying to evaluate the accuracy of tumor tracking radiation therapy system due to the change in the form of unpredictable sudden breathing due to cough and sleep. Materials and Methods : Breathing Log files that were used in the study, based on the Respiratory gating radiotherapy and Cyber-knife tracking radiosurgery breathing Log files of patients who received herein, measured using the Log files in the form of a Sinusoidal pattern and Sudden change pattern. it has been reconstituted as possible. Enter the reconstructed respiratory Log file cyber knife dynamic chest Phantom, so that it is possible to implement a motion due to respiration, add manufacturing the driving apparatus of the existing dynamic chest Phantom, Phantom the form of respiration we have developed a program that can be applied to. Movement of the phantom inside the target (Ball cube target) was driven by the displacement of three sizes of according to the size of the respiratory vertical (Superior-Inferior) direction to the 5 mm, 10 mm, 20 mm. Insert crosses two EBT3 films in phantom inside the target in response to changes in the target movement, the End-to-End (E2E) test provided in Cyber-Knife manufacturer depending on the form of the breathing five times each. It was determined by carrying. Accuracy of tumor tracking system is indicated by the target error by analyzing the inserted film, additional E2E test is analyzed by measuring the correlation error while being advanced. If the target

  14. The performance analysis of sonar target tracking based on pressure hydrophone arrays

    Science.gov (United States)

    Chen, Zhe; Liu, Qijun; Li, Zhizhong

    2017-06-01

    For the linear array sonar that consists of pressure hydrophones, it is difficult to solve the problem of port/starboard ambiguity. To estimate the target’s real azimuth accurately, the conventional beam forming methods of different arrays which include linear array, arc array, cross array and Y-shaped array were analysed. Based on the port/starboard discrimination ability and beam width, the sonar target tracking performance of different arrays was compared. It is shown that all arrays except the linear array could discriminate the real target, and the arc array’s effect is the best.

  15. TOPOS: a new topometric patient positioning and tracking system for radiation therapy based on structured white light.

    Science.gov (United States)

    Lindl, Bastian L; Müller, Reinhold G; Lang, Stephanie; Herraiz Lablanca, Maria D; Klöck, Stephan

    2013-04-01

    A patient positioning system for radiation therapy based on structured white light and using off-the-shelf hardware components for flexibility and cost-effectiveness has been developed in house. Increased accuracy, patient comfort, abandonment of any skin marks, accelerated workflow, objective reading/recording, better usability and robust sensor design, compared to other positioning approaches, were the main goals of this work. Another aim was the application of a 6 degrees of freedom tracking system working without dose deposition. Two optical sensors are the main parts of the TOPOS® system (Topometrical Positioning, cyberTECHNOLOGIES, Germany). The components: cameras, projectors, and computers are commercial off-the-shelf products, allowing for low production costs. The black/white cameras of the prototype are capable of taking up to 240 frames per second (resolution: 640 × 488 pixels). The projector has a resolution of 1024 × 768 and a refresh rate of 120 Hz. The patient's body surface is measured continuously and registered to a reference surface, providing a transformation to superimpose the patient's surface to the reference (planning CT) surface as best as possible. The execution of the calculated transformation provides the correct patient position before the treatment starts. Due to the high-speed acquisition of the surfaces, a surveillance of the patient's (respiration) motion during treatment is also accomplished. The accuracy of the system was determined using a male mannequin. Two treatment sites were evaluated: one simulating a head and neck treatment and the other simulating a thoracic wall treatment. The mannequin was moved to predefined positions, and shift vectors given by the surface registration were evaluated. Additionally manual positioning using a color-coding system was evaluated. Two prototypes have been developed, each allowing a continuous high density scan of a 500 × 500 × 400 mm(3) (L × W × D) large volume with a refresh rate

  16. The Biological Effectiveness of Accelerated Particles for the Induction of Chromosome Damage: Track Structure Effects and Cytogenetic Signatures of High-LET Exposure

    Science.gov (United States)

    George, K.; Hada, M.; Chappell, L.; Cucinotta, F. A.

    2012-01-01

    Track structure models predict that at a fixed value of LET, particles with lower charge number, Z will have a higher biological effectiveness compared to particles with a higher Z. In this report we investigated how track structure effects induction of chromosomal aberration in human cells. Human lymphocytes were irradiated in vitro with various energies of accelerated iron, silicon, neon, or titanium ions and chromosome damage was assessed in using three color FISH chromosome painting in chemically induced PCC samples collected a first cell division post irradiation. The LET values for these ions ranged from 30 to 195 keV/micrometers. Of the particles studied, Neon ions have the highest biological effectiveness for induction of total chromosome damage, which is consistent with track structure model predictions. For complex-type exchanges 64 MeV/ u Neon and 450 MeV/u Iron were equally effective and induced the most complex damage. In addition we present data on chromosomes exchanges induced by six different energies of protons (5 MeV/u to 2.5 GeV/u). The linear dose response term was similar for all energies of protons suggesting that the effect of the higher LET at low proton energies is balanced by the production of nuclear secondaries from the high energy protons. All energies of protons have a much higher percentage of complex-type chromosome exchanges than gamma rays, signifying a cytogenetic signature for proton exposures.

  17. Usability Analysis of Online Bank Login Interface Based on Eye Tracking Experiment

    Directory of Open Access Journals (Sweden)

    Xiaofang YUAN

    2014-02-01

    Full Text Available With the rapid development of information technology and rapid popularization of online banking, it is used by the more and more consumers. Studying on the usability of online banking interface, improving the user-friendliness of web interface, and enhancing attraction of bank website, which have gradually become the basic network marketing strategy of the banks. Therefore, this study took three banks as an example to record subjects’’ eye tracking data of time to first fixation, fixation duration and blink count and so on by using Tobii T60XL Eye Tracking equipment, while they login online banking web interface, and analyzed that the factors of webpage layout, colors, the amount of information presentation which impacts on the usability of online banking login interface. The results shows that the login entry, account login information and other key control buttons should be placed in the upper left corner to quickly lock the target, and the interface should have a moderate amount of information presentation, the appropriate proportion, reasonable font size settings, harmonious, simple, and warmth design style.

  18. Apatite fission track analysis on tectonic activities and paleotopography in southern Altai region, Xinjiang, China

    International Nuclear Information System (INIS)

    Zhao Wenju; Yuan Wanming; Liu Haotao; Song Gao

    2013-01-01

    This work engages apatite fission track evidences on thermotectonic history, rock uplift rate, denudation extent southeastern Altai region. Fission track ages of 14 samples range from (59.4±5.8) Ma to (109.7±8.1) Ma and the length is between (12.0±2.5) μm and (13.7±1.5) μm. Thermal modeling reveals that the samples have a three-stage of uplift-cooling history. The first stage is in an overall initial uplift before 108 Ma, the second stage from 108 Ma to 28 Ma experiences a slow cooling phase, and the last stage through a rapid-cooling process since 28 Ma with a cooling rate 1.25 1.61 ℃/Ma and denudation amount 1.17-1.50 km, the fast exhumation period in the area. The sample ages could be divided into 4 age groups, reflecting multiple tectonic events with different uplift rates. The paleotopography altitude changes from 3895 m to 821 m, 2250 m to 762 m etc., and the amplitude of changes reaches to 3300-1400 m since 90 Ma. The phenomenon of Alpine turning to valley and valley uplifting is visible in the studied area, indicating various stages of paleotopography. Based on inversion of ancient landforms and equilibrium correction, the equilibrium rebound would play an important role in the rock uplift during the Altai post-orogenic period. (authors)

  19. Analysis of storm tracks associated with flood events across the Paraguay River Basin

    Science.gov (United States)

    Santos, Marcus; Moura, Leonardo; Lima, Carlos; Mediero, Luis

    2017-04-01

    The hydrological time series of the Paraguay River Basin located in the Pantanal region of Brazil exhibits a complex and interesting behavior. Previous studies identified monotonic trends, multiple step changes and strong seasonality in flows and rainfall data, imposing therefore major challenges in the water resources and flood risk management in the region. The attribution of such changes is thus of particular interest, and in this work we analyze storm tracks across the Paraguay River Basin in order to better understand moisture sources and identify large scale climate patterns associated with the largest flood events in the basin. The storm path traced by virtual particles and the moisture gains and losses along such paths are obtained using the HYSPLIT Lagrangian model and the NCEP/NCAR reanalysis data for the period 1970-2016. A K-means clustering algorithm is employed to find patterns in the storm track data and for each cluster we obtain the distribution and statistics of the associated flood events. Preliminary results show that the source regions of moisture, namely tropical North Atlantic, South Atlantic and Amazon, play a significant role on the features of flood events, particularly in the magnitude of these events. Major floods seem to be related to a large influx of moisture coming from the Amazon region. We also observe that base flow and internal dynamics of the catchment play a minor role on the streamflow variability. These findings are a new step towards a better understanding and improvement of the flood risk management in the region.

  20. Structural integrity analysis of a steam turbine

    International Nuclear Information System (INIS)

    Villagarcia, Maria P.

    1997-01-01

    One of the most critical components of a power utility is the rotor of the steam turbine. Catastrophic failures of the last decades have promoted the development of life assessment procedures for rotors. The present study requires the knowledge of operating conditions, component geometry, the properties of materials, history of the component, size, location and nature of the existing flaws. The aim of the present work is the obtention of a structural integrity analysis procedure for a steam turbine rotor, taking into account the above-mentioned parameters. In this procedure, a stress thermal analysis by finite elements is performed initially, in order to obtain the temperature and stress distribution for a subsequent analysis by fracture mechanics. The risk of a fast fracture due to flaws in the central zone of the rotor is analyzed. The procedure is applied to an operating turbine: the main steam turbine of the Atucha I nuclear power utility. (author)

  1. Finite Element Vibration and Dynamic Response Analysis of Engineering Structures

    Directory of Open Access Journals (Sweden)

    Jaroslav Mackerle

    2000-01-01

    Full Text Available This bibliography lists references to papers, conference proceedings, and theses/dissertations dealing with finite element vibration and dynamic response analysis of engineering structures that were published from 1994 to 1998. It contains 539 citations. The following types of structures are included: basic structural systems; ground structures; ocean and coastal structures; mobile structures; and containment structures.

  2. Structural Analysis of Sandwich Foam Panels

    Energy Technology Data Exchange (ETDEWEB)

    Kosny, Jan [ORNL; Huo, X. Sharon [Tennessee Technological University

    2010-04-01

    The Sandwich Panel Technologies including Structural Insulated Panels (SIPs) can be used to replace the conventional wooden-frame construction method. The main purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and SGI Venture, Inc. was to design a novel high R-value type of metal sandwich panelized technology. This CRADA project report presents design concept discussion and numerical analysis results from thermal performance study of this new building envelope system. The main objective of this work was to develop a basic concept of a new generation of wall panel technologies which will have R-value over R-20 will use thermal mass to improve energy performance in cooling dominated climates and will be 100% termite resistant. The main advantages of using sandwich panels are as follows: (1) better energy saving structural panels with high and uniform overall wall R-value across the elevation that could not be achieved in traditional walls; and (2) reducing the use of raw materials or need for virgin lumber. For better utilization of these Sandwich panels, engineers need to have a thorough understanding of the actual performance of the panels and system. Detailed analysis and study on the capacities and deformation of individual panels and its assembly have to be performed to achieve that goal. The major project activity was to conduct structural analysis of the stresses, strains, load capacities, and deformations of individual sandwich components under various load cases. The analysis simulated the actual loading conditions of the regular residential building and used actual material properties of the steel facings and foam.

  3. Molecular Eigensolution Symmetry Analysis and Fine Structure

    Directory of Open Access Journals (Sweden)

    William G. Harter

    2013-01-01

    Full Text Available Spectra of high-symmetry molecules contain fine and superfine level cluster structure related to J-tunneling between hills and valleys on rovibronic energy surfaces (RES. Such graphic visualizations help disentangle multi-level dynamics, selection rules, and state mixing effects including widespread violation of nuclear spin symmetry species. A review of RES analysis compares it to that of potential energy surfaces (PES used in Born-Oppenheimer approximations. Both take advantage of adiabatic coupling in order to visualize Hamiltonian eigensolutions. RES of symmetric and D2 asymmetric top rank-2-tensor Hamiltonians are compared with Oh spherical top rank-4-tensor fine-structure clusters of 6-fold and 8-fold tunneling multiplets. Then extreme 12-fold and 24-fold multiplets are analyzed by RES plots of higher rank tensor Hamiltonians. Such extreme clustering is rare in fundamental bands but prevalent in hot bands, and analysis of its superfine structure requires more efficient labeling and a more powerful group theory. This is introduced using elementary examples involving two groups of order-6 (C6 and D3~C3v, then applied to families of Oh clusters in SF6 spectra and to extreme clusters.

  4. Structural dynamic analysis of turbine blade

    Science.gov (United States)

    Antony, A. Daniel; Gopalsamy, M.; Viswanadh, Chaparala B. V.; Krishnaraj, R.

    2017-10-01

    In any gas turbine design cycle, blade design is a crucial element which needs maximum attention to meet the aerodynamic performance, structural safety margins, manufacturing feasibility, material availability etc. In present day gas turbine engines, most of the failures occur during engine development test and in-service, in rotor and stator blades due to fatigue and resonance failures. To address this issue, an extensive structural dynamic analysis is carried out to predict the natural frequencies and mode shapes using FE methods. Using the dynamics characteristics, the Campbell diagram is constructed to study the possibility of resonance at various operating speeds. In this work, the feasibility of using composite material in place of titanium alloy from the structural dynamics point of view. This is being attempted in a Low-pressure compressor where the temperatures are relatively low and fixed with the casings. The analysis will be carried out using FE method for different composite material with different lamina orientations chosen through the survey. This study will focus on the sensitivity of blade mode shapes to different laminae orientations, which will be used to alter the natural frequency and tailor the mode shapes. Campbell diagrams of existing titanium alloy are compared with the composite materials with different laminae at all critical operating conditions. The existing manufacturing methods and the proven techniques for blade profiles will also be discussed in this report.

  5. Enumeration of extracellular vesicles by a new improved flow cytometric method is comparable to fluorescence mode nanoparticle tracking analysis.

    Science.gov (United States)

    Pasalic, Leonardo; Williams, Rebekka; Siupa, Agnieszka; Campbell, Heather; Henderson, Michelle J; Chen, Vivien M Y

    2016-05-01

    Extracellular vesicles (EVs) play a role in a variety of physiological and pathological processes. However, use of EVs as biomarkers has been hampered by limitations of current detection and enumeration methods. We compared fluorescence-threshold flow cytometry (FT-FC) to nanoparticle tracking analysis (NTA) for enumeration of cell culture-derived EVs. FT-FC and NTA utilising fluorescence mode (F-NTA) enumerated similar numbers of EVs stained with a membrane dye PKH67. Both methods were sufficiently sensitive to detect cell-derived EVs above the background of culture medium. Light scatter NTA (LS-NTA) detected 10-100× more particles than either fluorescence-based method but demonstrated poor specificity. F-NTA appeared to have better sensitivity for vesicles, however, the FT-FC method combined direct enumeration of EVs with high sensitivity and specificity in the >100nm range. Due to wider availability and higher degree of automation and standardisation, FT-FC is a reasonable surrogate to F-NTA for quantification of EVs. Extracellular vesicles are small particles, which can act as tools for intercellular communication. One recent area of interest in EVs is their potentials as biomarkers. In this article, the authors investigated and compared fluorescence-threshold flow cytometry (FT-FC) to nanoparticle tracking analysis (NTA) for the detection of EVs and showed that FT- FC method could be more advantageous. This technique should provide a new alternative for the future. Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.

  6. Open source tracking and analysis of adult Drosophila locomotion in Buridan's paradigm with and without visual targets.

    Directory of Open Access Journals (Sweden)

    Julien Colomb

    Full Text Available BACKGROUND: Insects have been among the most widely used model systems for studying the control of locomotion by nervous systems. In Drosophila, we implemented a simple test for locomotion: in Buridan's paradigm, flies walk back and forth between two inaccessible visual targets [1]. Until today, the lack of easily accessible tools for tracking the fly position and analyzing its trajectory has probably contributed to the slow acceptance of Buridan's paradigm. METHODOLOGY/PRINCIPAL FINDINGS: We present here a package of open source software designed to track a single animal walking in a homogenous environment (Buritrack and to analyze its trajectory. The Centroid Trajectory Analysis (CeTrAn software is coded in the open source statistics project R. It extracts eleven metrics and includes correlation analyses and a Principal Components Analysis (PCA. It was designed to be easily customized to personal requirements. In combination with inexpensive hardware, these tools can readily be used for teaching and research purposes. We demonstrate the capabilities of our package by measuring the locomotor behavior of adult Drosophila melanogaster (whose wings were clipped, either in the presence or in the absence of visual targets, and comparing the latter to different computer-generated data. The analysis of the trajectories confirms that flies are centrophobic and shows that inaccessible visual targets can alter the orientation of the flies without changing their overall patterns of activity. CONCLUSIONS/SIGNIFICANCE: Using computer generated data, the analysis software was tested, and chance values for some metrics (as well as chance value for their correlation were set. Our results prompt the hypothesis that fixation behavior is observed only if negative phototaxis can overcome the propensity of the flies to avoid the center of the platform. Together with our companion paper, we provide new tools to promote Open Science as well as the collection and

  7. BERSAFE: (BERkeley Structural Analysis by Finite Elements)

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    BERSAFE is a well-known finite element system which has been under continuous use and development for over 20 years. The BERSAFE system comprises an inter-compatible set of program modules covering static stress analysis, linear dynamics and thermal analysis. Data generation and results presentation modules are also available, along with special supporting functions including automatic crack growth through a model with adaptive meshing. The functionality of BERSAFE, is nowadays very advanced, both in engineering scope and finite element technology. It has seen many firsts, including the front solution and Virtual Crack Extension methods (VCE). More recent additions which have developed out of the Power Industry's requirements are a finite element computational fluid dynamics code, FEAT, and engineering design assessment procedures. These procedures include R6 and R5 for the assessment of the integrity of structures containing defects below and within the creep regime. To use all this software in a user-friendly manner, a new computational environment has been developed, called 'The Harness' which takes advantage of modern hardware and software philosophies. This provides the tool-kit to undertake complete problems, covering determination of fluid loads, structural analysis and failure assessment. In the following sections we describe briefly various components of the BERSAFE suite. (author)

  8. Fiber structural analysis by synchrotron radiation

    CERN Document Server

    Kojima, J I; Kikutani, T

    2003-01-01

    Topics of fiber structural analysis by synchrotron radiation are explained. There are only three synchrotron radiation facilities in the world, SPring-8 (Super Photon ring-8) in Japan, APS (Advanced Photon Source) in U.S.A. and ESRF (European Synchrotron Radiation Facility) in France. Online measurement of melt spinning process of PET and Nylon6 is explained in detail. Polypropylene and PBO (poly-p-phenylenebenzobisoxazole) was measured by WAXD (Wide Angle X-ray Diffraction)/SAXS (Small Angle X-ray Scattering) at the same time. Some examples of measure of drawing process of fiber are described. The structure formation process of spider's thread was measured. Micro beam of X-ray of synchrotron facility was improved and it attained to 65nm small angle resolving power by 10 mu m beamsize. (S.Y.)

  9. Trace quantities of uranium in some indian chewing tobaccos as determined by fission track analysis

    International Nuclear Information System (INIS)

    Rana, N.P.S.; Singh, P.; Azam, A.; Naqvi, A.H.; Srivastava, D.S.

    1996-01-01

    The sandwiched pellet technique using Makrofol-E plastic track detectors has been employed to determine trace quantities of uranium in nine brands of flavored chewing tobaccos consumed by the Indian population. In this technique the nuclear reaction, 235 U(n,f), is used for the quantitative estimation of uranium. The maximum value of uranium (1.88 ppm) has been found in raw tobacco leaves (Surti), while the minimum (0.13 ppm) in Tulsi (Double Zero brand). Other seven brands showed intermediate values of U-contents which are also reported in this paper. These values are compared with the U-contents reported in the literature for other forms of tobaccos. (author). 9 refs., 2 figs., 1 tab

  10. Region stability analysis and tracking control of memristive recurrent neural network.

    Science.gov (United States)

    Bao, Gang; Zeng, Zhigang; Shen, Yanjun

    2018-02-01

    Memristor is firstly postulated by Leon Chua and realized by Hewlett-Packard (HP) laboratory. Research results show that memristor can be used to simulate the synapses of neurons. This paper presents a class of recurrent neural network with HP memristors. Firstly, it shows that memristive recurrent neural network has more compound dynamics than the traditional recurrent neural network by simulations. Then it derives that n dimensional memristive recurrent neural network is composed of [Formula: see text] sub neural networks which do not have a common equilibrium point. By designing the tracking controller, it can make memristive neural network being convergent to the desired sub neural network. At last, two numerical examples are given to verify the validity of our result. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Quantitative analysis of spider locomotion employing computer-automated video tracking

    DEFF Research Database (Denmark)

    Baatrup, E; Bayley, M

    1993-01-01

    The locomotor activity of adult specimens of the wolf spider Pardosa amentata was measured in an open-field setup, using computer-automated colour object video tracking. The x,y coordinates of the animal in the digitized image of the test arena were recorded three times per second during four...... consecutive 12-h periods, alternating between white and red (lambda > 600 nm) illumination. Male spiders were significantly more locomotor active than female spiders under both lighting conditions. They walked, on average, twice the distance of females, employed higher velocities, and spent less time...... in quiescence. Both male and female P. amentata were significantly less active in red light (simulated dark environment) than in white light. The results also revealed that P. amentata administers its walking velocity and periods of quiescence according to consistent distributions, which can be approximated...

  12. A two-step along-track spectral analysis for estimating the magnetic signals of magnetospheric ring current from Swarm data

    Science.gov (United States)

    Martinec, Zdeněk; Velímský, Jakub; Haagmans, Roger; Šachl, Libor

    2018-02-01

    This study deals with the analysis of Swarm vector magnetic field measurements in order to estimate the magnetic field of magnetospheric ring current. For a single Swarm satellite, the magnetic measurements are processed by along-track spectral analysis on a track-by-track basis. The main and lithospheric magnetic fields are modelled by the CHAOS-6 field model and subtracted from the along-track Swarm magnetic data. The mid-latitude residual signal is then spectrally analysed and extrapolated to the polar regions. The resulting model of the magnetosphere (model MME) is compared to the existing Swarm Level 2 magnetospheric field model (MMA_SHA_2C). The differences of up to 10 nT are found on the nightsides Swarm data from 2014 April 8 to May 10, which are due to different processing schemes used to construct the two magnetospheric magnetic field models. The forward-simulated magnetospheric magnetic field generated by the external part of model MME then demonstrates the consistency of the separation of the Swarm along-track signal into the external and internal parts by the two-step along-track spectral analysis.

  13. Automated analysis of two-dimensional positions and body lengths of earthworms (Oligochaeta); MimizuTrack.

    Science.gov (United States)

    Kodama, Naomi; Kimura, Toshifumi; Yonemura, Seiichiro; Kaneda, Satoshi; Ohashi, Mizue; Ikeno, Hidetoshi

    2014-01-01

    Earthworms are important soil macrofauna inhabiting almost all ecosystems. Their biomass is large and their burrowing and ingestion of soils alters soil physicochemical properties. Because of their large biomass, earthworms are regarded as an indicator of "soil heath". However, primarily because the difficulties in quantifying their behavior, the extent of their impact on soil material flow dynamics and soil health is poorly understood. Image data, with the aid of image processing tools, are a powerful tool in quantifying the movements of objects. Image data sets are often very large and time-consuming to analyze, especially when continuously recorded and manually processed. We aimed to develop a system to quantify earthworm movement from video recordings. Our newly developed program successfully tracked the two-dimensional positions of three separate parts of the earthworm and simultaneously output the change in its body length. From the output data, we calculated the velocity of the earthworm's movement. Our program processed the image data three times faster than the manual tracking system. To date, there are no existing systems to quantify earthworm activity from continuously recorded image data. The system developed in this study will reduce input time by a factor of three compared with manual data entry and will reduce errors involved in quantifying large data sets. Furthermore, it will provide more reliable measured values, although the program is still a prototype that needs further testing and improvement. Combined with other techniques, such as measuring metabolic gas emissions from earthworm bodies, this program could provide continuous observations of earthworm behavior in response to environmental variables under laboratory conditions. In the future, this standardized method will be applied to other animals, and the quantified earthworm movement will be incorporated into models of soil material flow dynamics or behavior in response to chemical

  14. The Size of Mars' Fluid Core From Mars k2 Love Number Obtained From Analysis of MGS Doppler Tracking.

    Science.gov (United States)

    Yoder, C. F.; Konopliv, A. S.; Yuan, D. N.; Standish, E. M.; Folkner, W. M.

    2002-12-01

    The solar tidal deformation of Mars, measured by its k2 potential Love number, has been obtained from analysis of MGS radio tracking. The observed k2 =0.164+-0.016 is large enough to rule out a solid iron core. The inferred core radius Rc (1600kmtrack changes on a solution for k22, the drag model solves for a daily coefficient and thus effectively minimizes the influence of the along-track residual signature on this solution parameter. The k21 and k22 coefficients primarily affect the orbit node (k21 has an annual variation) where it is strongly mixed with seasonal changes in Mars' even zonal gravity harmonics (J2, J4). The odd gravity harmonics (J3, J5) are detected through seasonal changes in orbit eccentricity where the influences of tides are weak. The observed J3, J5 amplitudes are consistent with estimates of ice cap mass only if the cap thickness increases with latitude and the south cap is significantly larger than the north cap.

  15. Model tracking system for low-level radioactive waste disposal facilities: License application interrogatories and responses

    Energy Technology Data Exchange (ETDEWEB)

    Benbennick, M.E.; Broton, M.S.; Fuoto, J.S.; Novgrod, R.L.

    1994-08-01

    This report describes a model tracking system for a low-level radioactive waste (LLW) disposal facility license application. In particular, the model tracks interrogatories (questions, requests for information, comments) and responses. A set of requirements and desired features for the model tracking system was developed, including required structure and computer screens. Nine tracking systems were then reviewed against the model system requirements and only two were found to meet all requirements. Using Kepner-Tregoe decision analysis, a model tracking system was selected.

  16. Model tracking system for low-level radioactive waste disposal facilities: License application interrogatories and responses

    International Nuclear Information System (INIS)

    Benbennick, M.E.; Broton, M.S.; Fuoto, J.S.; Novgrod, R.L.

    1994-08-01

    This report describes a model tracking system for a low-level radioactive waste (LLW) disposal facility license application. In particular, the model tracks interrogatories (questions, requests for information, comments) and responses. A set of requirements and desired features for the model tracking system was developed, including required structure and computer screens. Nine tracking systems were then reviewed against the model system requirements and only two were found to meet all requirements. Using Kepner-Tregoe decision analysis, a model tracking system was selected

  17. Timber tracking

    DEFF Research Database (Denmark)

    Düdder, Boris; Ross, Omry

    2017-01-01

    Managing and verifying forest products in a value chain is often reliant on easily manipulated document or digital tracking methods - Chain of Custody Systems. We aim to create a new means of tracking timber by developing a tamper proof digital system based on Blockchain technology. Blockchain...

  18. Beyond Academic Tracking: Using Cluster Analysis and Self-Organizing Maps to Investigate Secondary Students' Chemistry Self-Concept

    Science.gov (United States)

    Nielsen, Sara E.; Yezierski, Ellen J.

    2016-01-01

    Academic tracking, placing students in different classes based on past performance, is a common feature of the American secondary school system. A longitudinal study of secondary students' chemistry self-concept scores was conducted, and one feature of the study was the presence of academic tracking. Though academic tracking is one way to group…

  19. Two Topics in Data Analysis: Sample-based Optimal Transport and Analysis of Turbulent Spectra from Ship Track Data

    Science.gov (United States)

    Kuang, Simeng Max

    This thesis contains two topics in data analysis. The first topic consists of the introduction of algorithms for sample-based optimal transport and barycenter problems. In chapter 1, a family of algorithms is introduced to solve both the L2 optimal transport problem and the Wasserstein barycenter problem. Starting from a theoretical perspective, the new algorithms are motivated from a key characterization of the barycenter measure, which suggests an update that reduces the total transportation cost and stops only when the barycenter is reached. A series of general theorems is given to prove the convergence of all the algorithms. We then extend the algorithms to solve sample-based optimal transport and barycenter problems, in which only finite sample sets are available instead of underlying probability distributions. A unique feature of the new approach is that it compares sample sets in terms of the expected values of a set of feature functions, which at the same time induce the function space of optimal maps and can be chosen by users to incorporate their prior knowledge of the data. All the algorithms are implemented and applied to various synthetic example and practical applications. On synthetic examples it is found that both the SOT algorithm and the SCB algorithm are able to find the true solution and often converge in a handful of iterations. On more challenging applications including Gaussian mixture models, color transfer and shape transform problems, the algorithms give very good results throughout despite the very different nature of the corresponding datasets. In chapter 2, a preconditioning procedure is developed for the L2 and more general optimal transport problems. The procedure is based on a family of affine map pairs, which transforms the original measures into two new measures that are closer to each other, while preserving the optimality of solutions. It is proved that the preconditioning procedure minimizes the remaining transportation cost

  20. Sensitivity analysis in a structural reliability context

    International Nuclear Information System (INIS)

    Lemaitre, Paul

    2014-01-01

    This thesis' subject is sensitivity analysis in a structural reliability context. The general framework is the study of a deterministic numerical model that allows to reproduce a complex physical phenomenon. The aim of a reliability study is to estimate the failure probability of the system from the numerical model and the uncertainties of the inputs. In this context, the quantification of the impact of the uncertainty of each input parameter on the output might be of interest. This step is called sensitivity analysis. Many scientific works deal with this topic but not in the reliability scope. This thesis' aim is to test existing sensitivity analysis methods, and to propose more efficient original methods. A bibliographical step on sensitivity analysis on one hand and on the estimation of small failure probabilities on the other hand is first proposed. This step raises the need to develop appropriate techniques. Two variables ranking methods are then explored. The first one proposes to make use of binary classifiers (random forests). The second one measures the departure, at each step of a subset method, between each input original density and the density given the subset reached. A more general and original methodology reflecting the impact of the input density modification on the failure probability is then explored. The proposed methods are then applied on the CWNR case, which motivates this thesis. (author)