Vitamin D, Essential Minerals, and Toxic Elements: Exploring Interactions between Nutrients and Toxicants in Clinical Medicine

Science.gov (United States)

Schwalfenberg, Gerry K.; Genuis, Stephen J.

2015-01-01

In clinical medicine, increasing attention is being directed towards the important areas of nutritional biochemistry and toxicant bioaccumulation as they relate to human health and chronic disease. Optimal nutritional status, including healthy levels of vitamin D and essential minerals, is requisite for proper physiological function; conversely, accrual of toxic elements has the potential to impair normal physiology. It is evident that vitamin D intake can facilitate the absorption and assimilation of essential inorganic elements (such as calcium, magnesium, copper, zinc, iron, and selenium) but also the uptake of toxic elements (such as lead, arsenic, aluminum, cobalt, and strontium). Furthermore, sufficiency of essential minerals appears to resist the uptake of toxic metals. This paper explores the literature to determine a suitable clinical approach with regard to vitamin D and essential mineral intake to achieve optimal biological function and to avoid harm in order to prevent and overcome illness. It appears preferable to secure essential mineral status in conjunction with adequate vitamin D, as intake of vitamin D in the absence of mineral sufficiency may result in facilitation of toxic element absorption with potential adverse clinical outcomes. PMID:26347061

Phytoremediation of soils contaminated with toxic elements and radionuclides

International Nuclear Information System (INIS)

Cornish, J.E.; Goldberg, W.C.; Levine, R.S.; Benemann, J.R.

1995-01-01

At many US Department of Energy (US DOE) facilities and other sites, surface soils over relatively large areas are contaminated with heavy metals, radionuclides, and other toxic elements, often at only a relatively small factor above regulatory action levels. Cleanup of such sites presents major challenges, because currently available soil remediation technologies can be very expensive. In response, the US DOE's Office of Technology Development, through the Western Environmental Technology Office, is sponsoring research in the area of phytoremediation. Phytoremediation is an emerging technology that uses higher plants to transfer toxic elements and radionuclides from surface soils into aboveground biomass. Some plants, termed hyperaccumulators, take up toxic elements in substantial amounts, resulting in concentrations in aboveground biomass over 100 times those observed with conventional plants. After growth, the plant biomass is harvested, and the toxic elements are concentrated and reclaimed or disposed of. As growing, harvesting, and processing plant biomass is relatively inexpensive, phytoremediation can be a low-cost technology for remediation of extensive areas having lightly to moderately contaminated soils. This paper reviews the potential of hyper- and moderate accumulator plants in soil remediation, provides some comparative cost estimates, and outlines ongoing work initiated by the US DOE

Determination of toxic elements in tobacco products by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Ahmad, S.; Chaudhry, M.S.; Qureshi, I.H.

1979-01-01

The concentration of 15 elements in various brands of cigarette tobacco and cigarette wrapping paper were determined using instrumental neutron activation analysis. The paper of some of the brands contains higher concentrations of toxic elements than the tobacco. The cigarette filter and the ash were also analyzed to determine the adsorption of toxic elements on the filter and their transference in smoke. The toxic effects of some of the elements have been briefly discussed. (author)

Short-tailed shrews: Toxicity and residue relationships of DDT, dieldrin, and endrin

Science.gov (United States)

Blus, L.J.

1978-01-01

Experiments involving dietary toxicity and residue relationships of DDT, dieldrin, and endrin were conducted with short-tailed shrews. Dietary concentrations of DDT dissolved in vegetable oils were usually more toxic than diets containing comparable amounts of powdered DDT. Younger shrews, particularly females, were more tolerant of powdered DDT than older animals; yet, there were no conspicuous age differences in toxicity of DDT dissolved in oils. In comparison to other mammals, short-tailed shrews are not unusually sensitive to DDT, dieldrin, or endrin on the basis of two-week feeding tests. The influence of age and sex on toxicity of DDT, endrin, and dieldrin was sometimes more important than body weight. Of those shrews of the same age and sex that were fed the same dietary dosage, heavier shrews were more tolerant than lighter individuals; and, heavier shrews tended to lose a greater percentage of body weight before death. There was a range of 15 to 105 DDT equivalents in brains of shrews dying on dietary dosages of DDT. Six shrews fed a high level of DDT seemed to have unusual metabolite capabilities and died with apparent lethal levels of DDD in their brains. Levels of dieldrin in brains of shrews that died on a dietary dosage of dieldrin ranged from 3.7 to 12.6 ppm. In the rates of gain and loss experiments where shrews were given diets containing 400 ppm DDT or 50 ppm dieldrin up to 17 days, high residues were noted in tissues of shrews after two weeks on a contaminated diet and a few died at that time. After shrews were placed on clean food, it was determined that >50% of the dieldrin residues in carcass and brain were lost in 50% of residues of DDT and metabolites in brains after 2 weeks on clean food; males lost nearly 50% of residues in carcasses after two weeks on clean food compared with a loss of only 11% in females.

Interaction of engineered nanoparticles with toxic and essential elements

International Nuclear Information System (INIS)

Shumakova, A A; Gmoshinski, I V; Khotimchenko, S A; Trushina, E N

2015-01-01

Interaction of engineered nanoparticles with toxic and essential trace elements must be taken into consideration when estimating risks of NPs presented in the natural environment. The purpose of this work was to study the possible influence of silica, titanium dioxide (rutile) and fullerenol NPs on the toxicity of cadmium and to research the status of some trace elements and related indices of immune function in experiments on laboratory animals. Young male Wistar rats received cadmium salt (1 mg/kg b.w. Cd) orally for 28 days separately or in conjunction with the said kinds of NPs in different doses. A number of effects was observed as a result of combined action of Cd together with NPs, increase in bioaccumulation of this toxic trace element in the liver was most evident. The observed effects didn't show simple dose- dependence in respect to nanomaterials that should be taken into consideration when assessing the possible risks of joint action of nanoparticles and toxic elements existing in the environment in extremely low doses. Violation of microelement homeostasis caused by the combined action of Cd and NPs can have various adverse effects, such as inhibition of T-cell immunity induced by co-administration of Cd with rutile NPs. (paper)

Interaction of engineered nanoparticles with toxic and essential elements

Science.gov (United States)

Shumakova, A. A.; Gmoshinski, I. V.; Khotimchenko, S. A.; Trushina, E. N.

2015-11-01

Interaction of engineered nanoparticles with toxic and essential trace elements must be taken into consideration when estimating risks of NPs presented in the natural environment. The purpose of this work was to study the possible influence of silica, titanium dioxide (rutile) and fullerenol NPs on the toxicity of cadmium and to research the status of some trace elements and related indices of immune function in experiments on laboratory animals. Young male Wistar rats received cadmium salt (1 mg/kg b.w. Cd) orally for 28 days separately or in conjunction with the said kinds of NPs in different doses. A number of effects was observed as a result of combined action of Cd together with NPs, increase in bioaccumulation of this toxic trace element in the liver was most evident. The observed effects didn't show simple dose- dependence in respect to nanomaterials that should be taken into consideration when assessing the possible risks of joint action of nanoparticles and toxic elements existing in the environment in extremely low doses. Violation of microelement homeostasis caused by the combined action of Cd and NPs can have various adverse effects, such as inhibition of T-cell immunity induced by co-administration of Cd with rutile NPs.

Toxic element contamination of natural health products and pharmaceutical preparations.

Directory of Open Access Journals (Sweden)

Stephen J Genuis

Full Text Available BACKGROUND: Concern has recently emerged regarding the safety of natural health products (NHPs-therapies that are increasingly recommended by various health providers, including conventional physicians. Recognizing that most individuals in the Western world now consume vitamins and many take herbal agents, this study endeavored to determine levels of toxic element contamination within a range of NHPs. METHODS: Toxic element testing was performed on 121 NHPs (including Ayurvedic, traditional Chinese, and various marine-source products as well as 49 routinely prescribed pharmaceutical preparations. Testing was also performed on several batches of one prenatal supplement, with multiple samples tested within each batch. Results were compared to existing toxicant regulatory limits. RESULTS: Toxic element contamination was found in many supplements and pharmaceuticals; levels exceeding established limits were only found in a small percentage of the NHPs tested and none of the drugs tested. Some NHPs demonstrated contamination levels above preferred daily endpoints for mercury, cadmium, lead, arsenic or aluminum. NHPs manufactured in China generally had higher levels of mercury and aluminum. CONCLUSIONS: Exposure to toxic elements is occurring regularly as a result of some contaminated NHPs. Best practices for quality control-developed and implemented by the NHP industry with government oversight-is recommended to guard the safety of unsuspecting consumers.

Dietary intake and health effects of selected toxic elements

OpenAIRE

Silva, André Luiz Oliveira da; Barrocas, Paulo R.G.; Jacob, Silvana do Couto; Moreira, Josino Costa

2005-01-01

Anthropogenic activities have being contributing to the spread of toxic chemicals into the environment, including several toxic metals and metalloids, increasing the levels of human exposure to many of them. Contaminated food is an important route of human exposure and may represent a serious threat to human health. This mini review covers the health effects caused by toxic metals, especially Cd, Hg, Pb and As, the most relevant toxic elements from a human health point of view. As atividad...

Essential and toxic trace elements in the chinese medicine

International Nuclear Information System (INIS)

Wang, C.F.; Jenq Yann Yang; Ming-Jenq Duo; Chang, E.E.

1996-01-01

The concentration of certain toxic and essential elements in various raw materials of Chinese herbs and 'scientific Chinese medicine' were determined by atomic absorption spectrometry (AAS) and instrumental neutron activation analysis (INAA). Correlation of these elements as they exist in the raw materials and in the prescription of medicine were investigated and the approximate intake of elements by patients were estimated. Values of elements determined both by AAS and INAA presented excellent agreement. The ranges of elemental concentrations were found to vary from 10 4 to 10 -1 mg/kg in different kinds of herbs. All herbs exhibit extraordinary enrichment capabilities from the environment for elements such as Mn, Zn, Ca, K, Mg, Cd, Cu, Pb and As. Higher contents of Cd, Pb and As in herbs may be attributed to the uptake of these elements from polluted soil due to industrial and anthropogenic activities. It was found that commercial scientific Chinese medicine, SCDBT, contains more elemental concentrations than that of herbs used in the prescription, which may indicate that possible contamination could be caused by unknown ingredients added in the process. A much higher toxic elemental content, such as Pb, Cd and As, has been found in CFH and the daily intake of these elements by the patient will exceed the PTDI values. (author)

Determination of toxic elements in foodstuffs in Vietnam

International Nuclear Information System (INIS)

Nguyen Van Minh; Le Thi Ngoc Trinh; Nguyen Giang; Le Tat Mua; Nguyen Mong Sinh

2006-01-01

The studying samples of this work have been collected from different areas of Vietnam including industrial areas in HCM city, Dongnai, Vungtau and non-industrial area, Dalat city. The concentrations of the toxic elements as: As, Hg, Cr, Co, Fe, Cu, Cd, Se, As, Zn, Pb in many foodstuff samples together with intercomparison sample which have been distributed by National Food Administration (Sweden) were analyzed by Instrumental Neutron Activation Analysis (INAA), Radiochemical Neutron Activation Analysis (RNAA); Atomic Absorption Spectrophotometer (AAS) and Anodic Stripping Voltammeter (ASV). The obtained results shown that the concentration of toxic elements in the collected samples from selected industrial areas of Vietnam are lower than the maximum permissible concentrations. (author)

Determination of toxic trace elements in body fluid reference samples

International Nuclear Information System (INIS)

Gills, T.E.; McClendon, L.T.; Maienthal, E.J.; Becker, D.A.; Durst, R.A.; LaFleur, P.D.

1974-01-01

The measurement of elemental concentration in body fluids has been widely used to give indication of exposures to certain toxic materials and/or a measure of body burden. To understand fully the toxicological effect of these trace elements on our physiological system, meaningful analytical data are required along with accurate standards or reference samples. The National Bureau of Standards has prepared for the National Institute for Occupational Safety and Health (NIOSH) a number of reference samples containing selected toxic trace elements in body fluids. The reference samples produced include mercury in urine at three concentration levels, five elements (Se, Cu, As, Ni and Cr) in freeze-dried urine at two levels, fluorine in freeze-dried urine at two levels and lead in blood at two concentration levels. These reference samples have been found to be extremely useful for the evaluation of field and laboratory analytical methods for the analysis of toxic trace elements. In particular the use of at least two calibration points (i.e., ''normal'' and ''elevated'' levels) for a given matrix provides a more positive calibration for most analytical techniques over the range of interest for occupational toxicological levels of exposure. (U.S.)

Hastelloy X fuel element creep relaxation and residual effects

International Nuclear Information System (INIS)

Castle, R.A.

1971-01-01

A worst case, seven element, asymmetric fuel, thermal environment was assumed and a creep relaxation analysis generated. The fuel element clad is .020 inch Hastelloy X. The contact load decreased from 11.6 pounds to 5.87 pounds in 100,000 hours. The residual stresses were then computed for various shutdown times. (U.S.)

Different finite element techniques to predict welding residual stresses in aluminum alloy plates

International Nuclear Information System (INIS)

Moein, Hadi; Sattari-Far, Iradj

2014-01-01

This study is a 3D thermomechanical finite element (FE) analysis of a single-pass and butt-welded work-hardened aluminum (Al) 5456 plates. It aims to validate the use of FE welding simulations to predict residual stress states in assessing the integrity of welded components. The predicted final residual stresses in the plate from the FE simulations are verified through comparison with experimental measurements. Three techniques are used to simulate the welding process. In the first two approaches, welding deposition is applied by using element birth and interaction techniques. In the third approach, the entire weld zone is simultaneously deposited. Results show a value at approximately the yield strength for longitudinal residual stresses of the welded center of the butt-welded Al alloy plates with a thickness of 2 mm. Considering the application of a comprehensive heat source, along with heat loss modeling and the temperature dependent properties of the material, the approach without deposition predicts a reasonable distribution of residual stresses. However, the element birth and interaction techniques, compared with the no-deposit technique, provide more accurate results in calculating residual stresses. Furthermore, the element interaction technique, compared with the element birth technique, exhibits higher efficiency and flexibility in modeling the deposition of welded metals as well as less modeling cost.

Environmental assessment of incinerator residue utilisation

OpenAIRE

Toller, Susanna

2008-01-01

 In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerat...

Data sheets on selected toxic elements

International Nuclear Information System (INIS)

Jaworski, J.F.

1982-01-01

The chemical elements considered in this volume have been identified as toxic to animal and vegetable life forms; however, these elements have not been studied as intensely as lead, mercury, cadmium, etc. Since, in most cases, existing data are insufficient to permit discussion and comparisons of relative quality, it was decided to present what quantitative data there are in as concise a manner as possible. The resulting data sheets present what is considered to be the best available information on the environmental levels, emissions and toxicology of these elements and some of their compounds. Reference is made to the article or review in which the datum appears and which may contain any discussion of the datum and the methods whereby it was obtained. Elements considered in this volume are antimony, barium, beryllium, bismuth, boron, cesium, gallium, germanium, indium, molybdenum, silver, tellurium, thallium, tin, uranium and zirconium

Extraction of toxic and valuable metals from wastewater sludge and ash arising from RECICLAGUA, a treatment plant for residual waters applying the leaching technique

International Nuclear Information System (INIS)

Guerrero D, J.J.

2004-01-01

Presently work, the technique is applied of having leached using coupled thermostatted columns, the X-ray diffraction for the identification of the atomic and molecular structure of the metals toxic that are present in the residual muds of a treatment plant of water located in the municipality of the Estado de Mexico, RECICLAGUA, likewise the techniques is used of Inductively Coupled Plasma Mass Spectroscopy and X-ray fluorescence analysis for the qualitative analysis. We took samples of residual sludge and incinerated ash of a treatment plant waste water from the industrial corridor Toluca-Lerma RECICLAGUA, located in Lerma, Estado de Mexico. For this study 100 g. of residual of sludge mixed with a solution to 10% of mineral acid or sodium hydroxide according to the case, to adjust the one p H at 2, 5, 7 and 10, bisulfite was added, of 0.3-1.5 g of dodecyl sulfate of sodium and 3.93 g of DTPA (triple V). Diethylene triamine penta acetate. These sludges and ashes were extracted from toxic and valuable metals by means of the leaching technique using coupled thermostated columns that which were designed by Dr. Jaime Vite Torres, it is necessary to make mention that so much the process as the apparatus with those that one worked was patented by him same. With the extraction of these metals, benefits are obtained, mainly of economic type, achieving the decrease of the volume of those wastes that have been generated; as well as the so much use of those residuals, once the metals have been eliminated, as of those residuals, once the metals have been eliminated, as of those liquors, the heavy metals were extracted. It was carried out a quantitative analysis using Icp mass spectroscopy, this way to be able to know the one content of the present metals in the samples before and after of leaching them, these results reported a great quantity of elements. Another of the techniques employees was the analysis by X-ray diffraction that provides an elementary content of the

Rare Earth Element Phases in Bauxite Residue

Directory of Open Access Journals (Sweden)

Johannes Vind

2018-02-01

Full Text Available The purpose of present work was to provide mineralogical insight into the rare earth element (REE phases in bauxite residue to improve REE recovering technologies. Experimental work was performed by electron probe microanalysis with energy dispersive as well as wavelength dispersive spectroscopy and transmission electron microscopy. REEs are found as discrete mineral particles in bauxite residue. Their sizes range from <1 μm to about 40 μm. In bauxite residue, the most abundant REE bearing phases are light REE (LREE ferrotitanates that form a solid solution between the phases with major compositions (REE,Ca,Na(Ti,FeO3 and (Ca,Na(Ti,FeO3. These are secondary phases formed during the Bayer process by an in-situ transformation of the precursor bauxite LREE phases. Compared to natural systems, the indicated solid solution resembles loparite-perovskite series. LREE particles often have a calcium ferrotitanate shell surrounding them that probably hinders their solubility. Minor amount of LREE carbonate and phosphate minerals as well as manganese-associated LREE phases are also present in bauxite residue. Heavy REEs occur in the same form as in bauxites, namely as yttrium phosphates. These results show that the Bayer process has an impact on the initial REE mineralogy contained in bauxite. Bauxite residue as well as selected bauxites are potentially good sources of REEs.

Electroremediation of air pollution control residues in a continuous reactor

DEFF Research Database (Denmark)

Jensen, Pernille Erland; Ferreira, Célia M. D.; Hansen, Henrik K.

2010-01-01

Air pollution control (APC) residue from municipal solid waste incineration is considered hazardous waste due to its alkalinity and high content of salts and mobile heavy metals. Various solutions for the handling of APC-residue exist, however most commercial solutions involve landfilling. A demand...... were made with raw residue, water-washed residue, acid washed residue and acid-treated residue with emphasis on reduction of heavy metal mobility. Main results indicate that the reactor successfully removes toxic elements lead, copper, cadmium and zinc from the feed stream, suggesting...

Levels of toxic elements in soils of abandoned waste dump site ...

African Journals Online (AJOL)

Of all the five toxic elements studied, the highest mean concentration (mg/kg) of 133.74±10.60 was recorded for Pb followed by Cr (22.27±3.03), Ni (8.14±0.33) and As (5.97±0.32) in the soils while the least mean concentration of 1.64±0.11 was recorded for Cd. The toxic elements were examined for dependency upon some ...

INAA and ETAAS of toxic element content of fruits harvested and consumed in Pakistan

International Nuclear Information System (INIS)

Waheed, S.; Siddique, N.; Rahman, A.; Zaidi, J.H.; Ahmad, S.

2004-01-01

Instrumental neutron activation analysis (INAA) and electro-thermal atomic absorption spectrometry (ETAAS) were employed to determine the toxic elements in fourteen fruits harvested in Pakistan. As, Br, Hg, Sb and Se were determined using INAA. Cadmium and Pb were determined using ETAAS. The intake levels of all toxic elements have been calculated. The data show that dates supply the maximum amount of most of the toxic elements. Peels of apple and pear have also been investigated and were found to contain higher concentration of toxic elements than their edible parts. The reliability of the techniques has been established by the use of standard reference materials. This study shows that all investigated fruits cultivated and consumed in Pakistan are safe for human consumption. (author)

Biological reference materials and analysis of toxic elements

Energy Technology Data Exchange (ETDEWEB)

Subramanian, R; Sukumar, A

1988-12-01

Biological monitoring of toxic metal pollution in the environment requires quality control analysis with use of standard reference materials. A variety of biological tissues are increasingly used for analysis of element bioaccumulation, but the available Certified Reference Materials (CRMs) are insufficient. An attempt is made to review the studies made using biological reference materials for animal and human tissues. The need to have inter-laboratory studies and CRM in the field of biological monitoring of toxic metals is also discussed.

TRACE ELEMENT CHEMISTRY IN RESIDUAL-TREATED SOIL: KEY CONCEPTS AND METAL BIOAVAILABILITY

Science.gov (United States)

Trace element solubility and availability in land-applied residuals is governed by fundamental chemical reactions between metal constituents, soil, and residual components. Iron, aluminum, and manganese oxides; organic matter; and phosphates, carbonates, and sulfides are importan...

Determination of essential and toxic elements in commercially available fruit juices

International Nuclear Information System (INIS)

Yawar, W.; Rahman, S.

1997-01-01

A study has been carried out for the determination of Cr, Pb, Fe in different varieties of commercially available packed fruit juices like apple, mango orange and mixed flavour by using flame and electrothermal atomic absorption spectrophotometric technique. These juices are available at a reasonable price and are commonly used by public. Like many other articles the baseline levels of essential and toxic elements in Pakistani fruit juices are generally not available. It was, therefore, considered to monitor the levels of essential as well toxic elements in the juices. Hence a variety of juices was collected from local market and measurements of the above mentioned elements were made. (author)

Co-ordinated research programme on nuclear techniques for toxic elements in foodstuffs

International Nuclear Information System (INIS)

1988-01-01

The purpose of this Co-ordinated Research Programme (CRP) is to obtain comparative data on the existing elemental concentrations of potentially toxic elements in foodstuffs in various countries. This study is also intended to provide information on the dietary intakes of toxic elements as a means to detect potential health hazards to the population groups concerned. This study has important economic implications since trade in foodstuffs is dependent on compliance with regulations pertaining to maximum permissible concentrations. An important supplementary purpose of the programme is to help establish analytical expertise for work of this kind in individual countries, allowing such laboratories to offer analytical quality control services. The programme has centred its objective on the determination of important toxic elements such as As, Cd, Cr, Hg, Pb and Se, in addition to Cu, Sb and Zn, which are also potentially toxic but are generally of minor importance from the point of view of public health. The matrices of interest are foodstuffs which comprise together more than 50% of the average daily intake. Drinking water is also of high importance and should be analysed as well. Refs, figs and tabs

Convergence of a residual based artificial viscosity finite element method

KAUST Repository

Nazarov, Murtazo

2013-02-01

We present a residual based artificial viscosity finite element method to solve conservation laws. The Galerkin approximation is stabilized by only residual based artificial viscosity, without any least-squares, SUPG, or streamline diffusion terms. We prove convergence of the method, applied to a scalar conservation law in two space dimensions, toward an unique entropy solution for implicit time stepping schemes. © 2012 Elsevier B.V. All rights reserved.

Essential and toxic elements in seaweeds for human consumption.

Science.gov (United States)

Desideri, D; Cantaluppi, C; Ceccotto, F; Meli, M A; Roselli, C; Feduzi, L

2016-01-01

Essential elements (K, Ca, P, S, Cl, Mn, Fe, Cu, Zn, Ni, Br, and I) and nonessential or toxic elements (Al, Ti, Si, Rb, Sr, As, Cd, Sn, and Pb) were determined by energy-dispersive polarized x-ray fluorescence spectrometry in 14 seaweeds purchased in local specialty stores in Italy and consumed by humans. The differences in elements between the algae species reached up to 2-4 orders of magnitude. Lithothamnium calcareum showed the highest levels of Ca, Al, Si, Fe, and Ti. Palmaria palmata showed the highest concentrations of K, Rb, and Cl. The highest content of S was in Chondrus crispus. Laminaria digitata contained the highest concentrations of total As, Cd, Sn, Br, and I. The highest concentration of Zn was in Chlorella pyrenoidosa. Ulva lactuca displayed the highest levels of Cu, Ni, Mn, and Pb. Iodine levels ranged from 3.4 in Chlorella pyrenoidosa to 7316 mg/kg(dry) in Laminaria digitata. The nutrimental importance of essential elements was assessed using nutritional requirements. The results showed that the consumption of algae might serve as an important source of the essential elements. Health risk due to the toxic elements present in seaweed was estimated using risk estimators. Total As, Cd, and Pb concentrations ranged from <1 to 67.6, to 7.2 and to 6.7 mg/kg(dry) respectively; therefore, their contribution to total elemental intake does not appear to pose any threat to the consumers, but the concentrations of these elements should be controlled to protect the consumer against potential adverse health risks.

Effect of water treatment residuals on soil phosphorus, copper and aluminium availability and toxicity

Energy Technology Data Exchange (ETDEWEB)

Lombi, E., E-mail: enzo.lombi@unisa.edu.a [CSIRO Land and Water, Centre for Environmental Contaminant Research, PMB 2, Glen Osmond, SA 5064 (Australia); Centre for Environmental Risk Assessment and Remediation, University of South Australia, Building X, Mawson Lakes Campus, Mawson Lakes, SA 5095 (Australia); CRC CARE, PO Box 486, Salisbury, SA 5106 (Australia); Stevens, D.P. [CSIRO Land and Water, Centre for Environmental Contaminant Research, PMB 2, Glen Osmond, SA 5064 (Australia); Arris Pty Ltd, PO Box 5143, Burnley, Victoria 3121 (Australia); McLaughlin, M.J. [CSIRO Land and Water, Centre for Environmental Contaminant Research, PMB 2, Glen Osmond, SA 5064 (Australia); Soil and Land Systems, University of Adelaide, PMB 1, Glen Osmond, SA 5064 (Australia)

2010-06-15

Water treatment residuals (WTRs) are produced by the treatment of potable water with coagulating agents. Beneficial recycling in agriculture is hampered by the fact that WTRs contain potentially toxic contaminants (e.g. copper and aluminium) and they bind phosphorus strongly. These issues were investigated using a plant bioassay (Lactuca sativa), chemical extractions and an isotopic dilution technique. Two WTRs were applied to an acidic and a neutral pH soil at six rates. Reductions in plant growth in amended soils were due to WTR-induced P deficiency, rather than Al or Cu toxicity. The release of potentially toxic Al from WTRs was found to be mitigated by their alkaline nature and pH buffering capacity. However, acidification of WTRs was shown to release more soluble Al than soil naturally high in Al. Copper availability was relatively low in all treatments. However, the lability of WTR-Cu increased when the WTR was applied to the soil. - The effect of water treatment residue application to soil was investigated in relation to phosphorus availability, and copper and aluminium phytotoxicity.

Effect of water treatment residuals on soil phosphorus, copper and aluminium availability and toxicity

International Nuclear Information System (INIS)

Lombi, E.; Stevens, D.P.; McLaughlin, M.J.

2010-01-01

Water treatment residuals (WTRs) are produced by the treatment of potable water with coagulating agents. Beneficial recycling in agriculture is hampered by the fact that WTRs contain potentially toxic contaminants (e.g. copper and aluminium) and they bind phosphorus strongly. These issues were investigated using a plant bioassay (Lactuca sativa), chemical extractions and an isotopic dilution technique. Two WTRs were applied to an acidic and a neutral pH soil at six rates. Reductions in plant growth in amended soils were due to WTR-induced P deficiency, rather than Al or Cu toxicity. The release of potentially toxic Al from WTRs was found to be mitigated by their alkaline nature and pH buffering capacity. However, acidification of WTRs was shown to release more soluble Al than soil naturally high in Al. Copper availability was relatively low in all treatments. However, the lability of WTR-Cu increased when the WTR was applied to the soil. - The effect of water treatment residue application to soil was investigated in relation to phosphorus availability, and copper and aluminium phytotoxicity.

Finite element analysis of residual stress in plasma-sprayed ceramic

International Nuclear Information System (INIS)

Mullen, R.L.; Hendricks, R.C.; McDonald, G.

1985-01-01

Residual stress in a ZrO 2 -Y 2 O 3 ceramic coating resulting from the plasma spraying operation is calculated. The calculations were done using the finite element method. Both thermal and mechanical analysis were performed. The resulting residual stress field was compared to the measurements obtained by Hendricks and McDonald. Reasonable agreement between the predicted and measured moment occurred. However, the resulting stress field is not in pure bending

Embrittling effects of residual elements on steels

International Nuclear Information System (INIS)

Brear, J.M.; King, B.L.

1979-01-01

In a review of work related to reheat cracking in nuclear pressure vessel steels, Dhooge et al referred to work of the authors on the relative embrittling parameter for SA533B steels. The poor agreement when these parameters were applied to creep ductility data for SA508 class 2 lead the reviewers to conclude that the relative importance of impurity elements is a function of base alloy composition. The authors briefly describe some of their more recent work which demonstrates that when various mechanical, and other, effects are taken into consideration, the relative effects of the principal residual elements are similar, despite differing base compositions, and that the embrittling parameters derived correlate well with the data for SA Class 2 steel. (U.K.)

Toxic Elements in Different Medicinal Plants and the Impact on Human Health.

Science.gov (United States)

Brima, Eid I

2017-10-11

Local medicinal plants from Madina, Saudi Arabia, are used to cure various diseases. However, some can cause adverse health effects. Five different medicinal plants were collected in the city of Madina: mahareeb ( Cymbopogon ), sheeh ( Artemisia ), harjal ( Cynanchum argel delile ), nabipoot ( Equisetum ), and kafmariam ( Vitex agnus-castus ). In total, four toxic elements including Al, Pb, As, and Cd were analyzed using inductively coupled plasma mass spectrometry (ICP-MS). The range of recoveries fell between 86.1 and 90.6% for all measured elements. Al levels were the highest of any of the studied elements in all plant samples, with Cymbopogon showing the highest levels. The range of concentrations of Al was 156-1609 mg/kg. Cd appeared at the lowest levels in all plants samples, with Vitex agnus-castus containing this element at the highest levels. Cd concentrations were in the range of 0.01-0.10 mg/kg. A washing process lowered the toxic elements in all plants; average % recoveries were Al (47.32%), As (59.1%), Cd (62.03%), and Pb (32.40%). The calculated human health risk assessment in one dose for toxic elements in all plants was as follows: Al (1.33 × 10 -3 -5.57 × 10 -2 mg/kg.bw), Pb (0-8.86 × 10 -5 mg/kg.bw), As (3.43 × 10 -7 -1.33 × 10 -5 mg/kg.bw), and Cd (0-3.14 × 10 -6 mg/kg.bw). Medicinal plants are a source of exposure to toxic elements. However, none of the plants in this study exceeded the daily guideline set by the WHO for any element based on conventional use by the local population. We may cautiously conclude that these medicinal plants pose no risk to users based on conventional use.

Toxic Elements in Different Medicinal Plants and the Impact on Human Health

Directory of Open Access Journals (Sweden)

Eid I. Brima

2017-10-01

Full Text Available Local medicinal plants from Madina, Saudi Arabia, are used to cure various diseases. However, some can cause adverse health effects. Five different medicinal plants were collected in the city of Madina: mahareeb (Cymbopogon, sheeh (Artemisia, harjal (Cynanchum argel delile, nabipoot (Equisetum, and kafmariam (Vitex agnus-castus. In total, four toxic elements including Al, Pb, As, and Cd were analyzed using inductively coupled plasma mass spectrometry (ICP-MS. The range of recoveries fell between 86.1% and 90.6% for all measured elements. Al levels were the highest of any of the studied elements in all plant samples, with Cymbopogon showing the highest levels. The range of concentrations of Al was 156–1609 mg/kg. Cd appeared at the lowest levels in all plants samples, with Vitex agnus-castus containing this element at the highest levels. Cd concentrations were in the range of 0.01–0.10 mg/kg. A washing process lowered the toxic elements in all plants; average % recoveries were Al (47.32%, As (59.1%, Cd (62.03%, and Pb (32.40%. The calculated human health risk assessment in one dose for toxic elements in all plants was as follows: Al (1.33 × 10−3–5.57 × 10−2 mg/kg.bw, Pb (0–8.86 × 10−5 mg/kg.bw, As (3.43 × 10−7–1.33 × 10−5 mg/kg.bw, and Cd (0–3.14 × 10−6 mg/kg.bw. Medicinal plants are a source of exposure to toxic elements. However, none of the plants in this study exceeded the daily guideline set by the WHO for any element based on conventional use by the local population. We may cautiously conclude that these medicinal plants pose no risk to users based on conventional use.

Toxic Elements in Different Medicinal Plants and the Impact on Human Health

Science.gov (United States)

Brima, Eid I.

2017-01-01

Local medicinal plants from Madina, Saudi Arabia, are used to cure various diseases. However, some can cause adverse health effects. Five different medicinal plants were collected in the city of Madina: mahareeb (Cymbopogon), sheeh (Artemisia), harjal (Cynanchum argel delile), nabipoot (Equisetum), and kafmariam (Vitex agnus-castus). In total, four toxic elements including Al, Pb, As, and Cd were analyzed using inductively coupled plasma mass spectrometry (ICP-MS). The range of recoveries fell between 86.1 and 90.6% for all measured elements. Al levels were the highest of any of the studied elements in all plant samples, with Cymbopogon showing the highest levels. The range of concentrations of Al was 156–1609 mg/kg. Cd appeared at the lowest levels in all plants samples, with Vitex agnus-castus containing this element at the highest levels. Cd concentrations were in the range of 0.01–0.10 mg/kg. A washing process lowered the toxic elements in all plants; average % recoveries were Al (47.32%), As (59.1%), Cd (62.03%), and Pb (32.40%). The calculated human health risk assessment in one dose for toxic elements in all plants was as follows: Al (1.33 × 10−3–5.57 × 10−2 mg/kg.bw), Pb (0–8.86 × 10−5 mg/kg.bw), As (3.43 × 10−7–1.33 × 10−5 mg/kg.bw), and Cd (0–3.14 × 10−6 mg/kg.bw). Medicinal plants are a source of exposure to toxic elements. However, none of the plants in this study exceeded the daily guideline set by the WHO for any element based on conventional use by the local population. We may cautiously conclude that these medicinal plants pose no risk to users based on conventional use. PMID:29019913

Study on essential and toxic elements intake from drinking of Chinese tea

International Nuclear Information System (INIS)

Hai-Qing Zhang; Bang-Fa Ni; Wei-Zhi Tian; Gui-Ying Zhang; Dong-Hui Huang; Cun-Xiong Liu; Cai-Jin Xiao; Hong-Chao Sun; Chang-Jun Zhao

2011-01-01

Twenty different brands of Chinese tea were analyzed for multiple trace elements, including some essential and toxic elements, by neutron activation analysis (NAA). A comparison among tea brands from China, India, US and other countries was made for the ranges and averages of concentrations for Na, K, Mn, Cu, and Br. It has been observed that the trace element contents in tea leaves are largely dependent upon the soil and the environment where the tea grows. Chinese tea is rich in Mn and Cu comparing with those of other counties surveyed, but is indigent in Na. The transference ratio for each element determined (i.e., the fraction of an element in tea leave transferred into solution when tea is leached by percolation) is also reported. Adult daily intakes of some essential and toxic elements from tea drinking were also estimated. (author)

Toxicity and Residual Activity of Insecticides Against Tamarixia triozae (Hymenoptera: Eulophidae), a Parasitoid of Bactericera cockerelli (Hemiptera: Triozidae).

Science.gov (United States)

Luna-Cruz, Alfonso; Rodríguez-Leyva, Esteban; Lomeli-Flores, J Refugio; Ortega-Arenas, Laura D; Bautista-Martínez, Néstor; Pineda, Samuel

2015-10-01

Bactericera cockerelli (Sulc) (Hemiptera: Triozidae) is one of the most economically important pests of potato, tomato, and peppers in Central America, Mexico, the United States, and New Zealand. Its control is based on the use of insecticides; however, recently, the potential of the eulophid parasitoid Tamarixia triozae (Burks) (Hymenoptera: Eulophidae) for population regulation has been studied. Because T. triozae is likely to be exposed to insecticides on crops, the objective of this study was to explore the compatibility of eight insecticides with this parasitoid. The toxicity and residual activity (persistence) of spirotetramat, spiromesifen, beta-cyfluthrin, pymetrozine, azadirachtin, imidacloprid, abamectin, and spinosad against T. triozae adults were assessed using a method based on the residual contact activity of each insecticide on tomato leaf discs collected from treated plants growing under greenhouse conditions. All eight insecticides were toxic to T. triozae. Following the classification of the International Organization of Biological Control, the most toxic were abamectin and spinosad, which could be placed in toxicity categories 3 and 4, respectively. The least toxic were azadirachtin, pymetrozine, spirotetramat, spiromesifen, imidacloprid, and beta-cyfluthrin, which could be placed in toxicity category 2. In terms of persistence, by day 5, 6, 9, 11, 13, 24, and 41 after application, spirotetramat, azadirachtin, spiromesifen, pymetrozine, imidacloprid, beta-cyfluthrin, abamectin, and spinosad could be considered harmless, that is, placed in toxicity category 1 (<25% mortality of adults). The toxicity and residual activity of some of these insecticides allow them to be considered within integrated pest management programs that include T. triozae. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

STUDIES OF CHOSEN TOXIC ELEMENTS CONCENTRATION IN MULTIFLOWER BEE HONEY

Directory of Open Access Journals (Sweden)

Ewa Popiela

2011-04-01

Full Text Available 72 544x376 Normal 0 21 false false false  The aim of the study was to determine the bioaccumulation level of chosen toxic elements (Zn, Cu, Pb, As and Cd in multiflower honey collected from Brzeg area. Biological material (honey was mineralized using the microwave technique at an elevated pressure in the microprocessor station of pressure in the type Mars 5. Quantitative analysis of elements (As, Cd, Cu, Pb and Zn was performed by plasma spectrometry method using a Varian ICP-AES apparatus. The presence of toxic elements was determined in examined biological materials. The elements fallowed the fallowing decreasing order with respect to their content of honey: Zn>Cu>Pb>As>Cd. The average concentrations of studied elements observed in multi-flower honey were as follows: 6.24 mg.kg-1 of zinc, 2.75 mg.kg-1 of copper, 0.53, 0.071, 0.042 mg.kg-1of lead, arsenic and cadmium, respectively. Lead was the most problematic in bee honey because its average content exceeded the maximum acceptable concentration. Additionally, this metal concentration was 60% higher in studied samples than allowable standard of lead content.doi:10.5219/134 

Residues of Malathion and Metabolites in and on the Cotton Leaf vs. Toxicity to the Boll Weevil

Science.gov (United States)

D.A. Wolfenbarger

2002-01-01

Malathion was applied at 12 and 16 oz [A.l.]/a to cotton near Mercedes, TX, in 1995 and sampled on 0, 2, 4 and 6 d posttreatment to determine residues of malathion, malaoxon, and iso-malathion. Residues were then compared to determine toxicity to boll weevil, Anthonomus grandis Boheman. Residues of malathion comprised 99% of the leaf washes and 100% of the leaf...

Biochar application to hardrock mine tailings: Soil quality, microbial activity, and toxic element sorption

Science.gov (United States)

Kelly, Charlene N.; Peltz, Christopher D.; Stanton, Mark R.; Rutherford, David W.; Rostad, Colleen E.

2014-01-01

Waste rock piles from historic mining activities remain unvegetated as a result of metal toxicity and high acidity. Biochar has been proposed as a low-cost remediation strategy to increase soil pH and reduce leaching of toxic elements, and improve plant establishment. In this laboratory column study, biochar made from beetle-killed pine wood was assessed for utility as a soil amendment by mixing soil material from two mine sites collected near Silverton, Colorado, USA with four application rates of biochar (0%, 10%, 20%, 30% vol:vol). Columns were leached seven times over 65 days and leachate pH and concentration of toxic elements and base cations were measured at each leaching. Nutrient availability and soil physical and biological parameters were determined following the incubation period. We investigated the hypotheses that biochar incorporation into acidic mine materials will (1) reduce toxic element concentrations in leaching solution, (2) improve soil parameters (i.e. increase nutrient and water holding capacity and pH, and decrease compaction), and (3) increase microbial populations and activity. Biochar directly increased soil pH (from 3.33 to 3.63 and from 4.07 to 4.77 in the two materials) and organic matter content, and decreased bulk density and extractable salt content in both mine materials, and increased nitrate availability in one material. No changes in microbial population or activity were detected in either mine material upon biochar application. In leachate solution, biochar increased base cations from both materials and reduced the concentrations of Al, Cd, Cu, Pb, and Zn in leachate solution from one material. However, in the material with greater toxic element content, biochar did not reduce concentrations of any measured dissolved toxic elements in leachate and resulted in a potentially detrimental release of Cd and Zn into solution at concentrations above that of the pure mine material. The length of time of effectiveness and specific

Application of neutron activation analysis technique to the determination of toxic elements in Pakistani foodstuffs

International Nuclear Information System (INIS)

Qureshi, I.H.; Mannan, A.; Zaidi, J.H.; Arif, M.; Khalid, N.

1988-01-01

In view of well defined physiochemical roles of essential elements and adverse effects of toxic elements, it is important to obtain fundamental data on trace element nutrition, inadequacy, imbalances and toxicity. In order to achieve these objectives, a research project was initiated in 1985 with the collaboration of the IAEA. Three representative diet samples of the inhabitants of Rawalpindi/Islamabad areas were prepared according to the family income and food habits. Twenty one elements were analysed by NAA and AAS. The dietary intake values were estimated and compared with the suggested daily requirement or tolerance limits. In general, it has been observed that the diets are an adequate source of nutrient elements. The toxic element levels are well below the tolerance limits. (author). 20 refs, 4 figs, 7 tabs

Viscoelastic finite element analysis of residual stresses in porcelain-veneered zirconia dental crowns.

Science.gov (United States)

Kim, Jeongho; Dhital, Sukirti; Zhivago, Paul; Kaizer, Marina R; Zhang, Yu

2018-06-01

The main problem of porcelain-veneered zirconia (PVZ) dental restorations is chipping and delamination of veneering porcelain owing to the development of deleterious residual stresses during the cooling phase of veneer firing. The aim of this study is to elucidate the effects of cooling rate, thermal contraction coefficient and elastic modulus on residual stresses developed in PVZ dental crowns using viscoelastic finite element methods (VFEM). A three-dimensional VFEM model has been developed to predict residual stresses in PVZ structures using ABAQUS finite element software and user subroutines. First, the newly established model was validated with experimentally measured residual stress profiles using Vickers indentation on flat PVZ specimens. An excellent agreement between the model prediction and experimental data was found. Then, the model was used to predict residual stresses in more complex anatomically-correct crown systems. Two PVZ crown systems with different thermal contraction coefficients and porcelain moduli were studied: VM9/Y-TZP and LAVA/Y-TZP. A sequential dual-step finite element analysis was performed: heat transfer analysis and viscoelastic stress analysis. Controlled and bench convection cooling rates were simulated by applying different convective heat transfer coefficients 1.7E-5 W/mm 2 °C (controlled cooling) and 0.6E-4 W/mm 2 °C (bench cooling) on the crown surfaces exposed to the air. Rigorous viscoelastic finite element analysis revealed that controlled cooling results in lower maximum stresses in both veneer and core layers for the two PVZ systems relative to bench cooling. Better compatibility of thermal contraction coefficients between porcelain and zirconia and a lower porcelain modulus reduce residual stresses in both layers. Copyright © 2018 Elsevier Ltd. All rights reserved.

Determination and evaluation of toxic elements in Chinese foodstuffs

International Nuclear Information System (INIS)

Sun Laiyan; Lu Fengying; Zhou Wenping; Zhen Houxi; Su Rongwei; Liao Qingshang; Li Xuezeng; Wang Huaihui

1988-01-01

The concentrations of toxic elements As, Br, Cr, Cu, Pb, Se and Zn in various foodstuffs collected in Beijing, Shanghai, Xian and Wuhan were determined using neutron activation analysis (NAA) and atomic absorption spectrometry (AAS) methods were obtained with high or medium precision. According to the average daily intake of various foods, the daily intake of these toxic elements were estimated for each person in the four cities. They (in microgram) were 42.6, 166.3, 1738, 106.8, 7939, 1145 and 67.1 respectively for As, Cr, Cu, Se, Zn, Br and Pb in Beijing, 52.2, 167, 1213, 91.5, 6026, 519 and 89.9 in Shanghai, 46.2, 184, 1782, 119.2, 8729, 1132 and 133.4 in Xian, and 63.2, 142.1, 1556, 76.9, 7882, 528 and 73.7 in Wuhan. (author). 2 refs, 12 tabs

Determination of Toxic Elements in Cigarettes Smoke, Using Neutron Activation Method

International Nuclear Information System (INIS)

Mellawati, J; Chichester D

1996-01-01

The purpose of the experiments was to get information of the toxic elements content in cigarettes smoke which could be used to estimate the cigarettes smoke contribution in air pollution. The sample were cigarette smoke from the mixture of 7 popular brand cigarettes collected by The Centre Cigarettes Research, University of kentucky, USA. Neutron activation was done in the Hoger Onderwijs Reactor, IRI Delft Netherlands, using thermal neutron flux 4.8 x 10 16n cm-2 second-1 for 4 hours. Result of the analysis showed that the cigarettes smoke contained Cd, As, Sb, and Br which are toxic elements

Determination of toxic elements in foodstuffs from local market in Jakarta

International Nuclear Information System (INIS)

Surtipanti Sadjirun; Suwirma Safri; Endang Rosadi; Yumiarti; Yune Mellawati; Saifudin Simon; Minarni Ak

1988-01-01

The main foodstuffs of Indonesian people are, rice, bean, corn, wheat, vegetables, fruits, meat, fish, milk, tea, and coffee. The problem of the control of toxic elements in foodstuffs have not been carried out such as many countries, so there is no established maximum permissible concentration in the Indonesian national legislation, and that is why Indonesia participates in the Co-ordinated Research Program organized by the International Atomic Energy Agency. This program will allow exchange of experience among the participants, especially in the determination of low level toxic elements in foodstuffs using nuclear techniques. 6 refs, 9 tabs

Seasonal changes in chemical and mineralogical composition of sewage sludge incineration residues and their potential for metallic elements and valuable components recovery

Science.gov (United States)

Kasina, Monika; Kowalski, Piotr R.; Michalik, Marek

2017-04-01

Increasing energy needs, the implementation of the circular economy principles and rising environmental awareness caused that waste management is becoming a major social and economic issue. The EU Member States have committed to a significant reduction in the amount of waste produced and landfilled and to use their inherent energy and raw materials potential. One of the most reasonable option to fulfil these commitments is waste incineration. The aim of the waste incineration is to reduce their volume and toxicity by disinfection and detoxification at high temperatures. Thermal process and reduction of volume allows the recovery of minerals and metallic elements from residues as well as the energy production (waste-to-energy strategy) during incineration. As a result of waste incineration a variety of solid residues (bottom ash, fly ash, air pollution control residues) and technological waste (gas waste, wastewater) are produced. The goal of this study is to characterize fly ash and air pollution control (APC) residues formed as a result of municipal sewage sludge incineration in terms of their chemical and mineral composition and their extractive potential. Residues were sampled quarterly to study their seasonal changes in composition. The fly ash was a Si-P-C-Fe-Al dominated material, whereas the APC residues composition was dominated by Na-rich soluble phases. The removal of soluble phase ( 98% of the material) from the APC residues by dissolution in deionised water caused significant mass reduction and concentration of non-soluble elements. The main mineral phases in fly ash were quartz, hematite, Fe-PO4, whitlockite and feldspar, while in APC thenardite, and in lower amount calcite, apatite and quartz were present. The chemical composition of fly ash was practically invariable in different seasons, but significant differences were observed in APC residues. The lowest concentrations of all elements and the highest TOC content were measured in the samples

Occurrence and risk assessment of potentially toxic elements and typical organic pollutants in contaminated rural soils.

Science.gov (United States)

Xu, Yongfeng; Dai, Shixiang; Meng, Ke; Wang, Yuting; Ren, Wenjie; Zhao, Ling; Christie, Peter; Teng, Ying

2018-07-15

The residual levels and risk assessment of several potentially toxic elements (PTEs), phthalate esters (PAEs) and polycyclic aromatic hydrocarbons (PAHs) in rural soils near different types of pollution sources in Tianjin, China, were studied. The soils were found to be polluted to different extents with PTEs, PAEs and PAHs from different pollution sources. The soil concentrations of chromium (Cr), nickel (Ni), di-n-butyl phthalate (DnBP), acenaphthylene (Any) and acenaphthene (Ane) were higher than their corresponding regulatory reference limits. The health risk assessment model used to calculate human exposure indicates that both non-carcinogenic and carcinogenic risks from selected pollutants were generally acceptable or close to acceptable. Different types of pollution sources and soil physicochemical properties substantially affected the soil residual concentrations of and risks from these pollutants. PTEs in soils collected from agricultural lands around industrial and residential areas and organic pollutants (PAEs and PAHs) in soils collected from agricultural areas around livestock breeding were higher than those from other types of pollution sources and merit long-term monitoring. Copyright © 2018 Elsevier B.V. All rights reserved.

Toxic element profiles in selected medicinal plants growing on serpentines in Bulgaria.

Science.gov (United States)

Pavlova, Dolja; Karadjova, Irina

2013-12-01

Populations of medicinal plants growing on serpentines and their respective soils were analyzed for Fe, Ni, Mn, Cr, Co, Cd, Cu, Zn, and Pb using inductively coupled plasma atomic emission spectrometry. Aqua regia extraction and 0.43 M acetic acid extraction were used for the quantification of pseudototal and bioavailable fractions, respectively, of elements in soil and nitric acid digestion for determination of total element content in plants. Screening was performed to (1) document levels of toxic metals in herbs extensively used in preparation of products and standardized extracts, (2) compare accumulation abilities of ferns and seed plants, and (3) estimate correlations between metal content in plants and their soils. The toxic element content of plants varied from site to site on a large scale. The concentrations of Fe and Ni were elevated while those of Cu, Zn, and Pb were close to average values usually found in plants. The highest concentrations for almost all elements were measured in both Teucrium species. Specific differences in metal accumulation between ferns and seed plants were not recorded. The investigated species are not hyperaccumulators but can accumulate toxic elements, in some cases exceeding permissible levels proposed by the World Health Organization and European Pharmacopoeia. The harvesting of medicinal plants from serpentines could be hazardous to humans.

Study of radon, thoron and toxic elements in some textile dyes

International Nuclear Information System (INIS)

Abel-Ghany, H.A.

2013-01-01

Elemental analysis of textile dyes may provide valuable information concerning the content and concentrations of element, especially the toxic ones. Such information monitors the safety of handling and using these dyes in textile industry. In addition to the safety of wearing of clothes stained with these dyes. In the present work, the specific activity of both radon and thoron were measured in nine textile dyes by using alpha emitters registration which are emitted from radon and thoron gases in CR-39 nuclear track detectors. Unexpectedly, the results obtained reports a high concentration of both radon and thoron gases in some samples (samples D5 and D9). Also the concentration of toxic elements (Cu, Pb, Zn, Mn, Cd and Cr) in textile dyes were determined by flame and graphite furnace atomic absorption spectrometry. (author)

Chemical modelling of trace elements in pore water from PFBC residues containing ammonia

International Nuclear Information System (INIS)

Karlsson, L.G.; Brandberg, F.

1993-01-01

Ammonia is added to the PFBC process with the purpose to reduce the emissions of NO x in the stack gases. The design of the system for cleaning the stack gases will lead to an increased adsorption of ammonia and an accumulation of soluble ammonium salts in the cyclone ash from PFBC processes. This can be an environmental problem since the amounts will increase over the coming years and there will be a need to dispose the residues. When infiltrating rainwater penetrates the disposed residues ammonia and ammonium salts result in a contamination of the pore water with ammonia in the disposed residues. This entail the solubility of several trace elements in the residues that form soluble complexes with ammonia will increase and cause an increased contamination of groundwater and surface water. In this study the increased solubilities is calculated for the trace elements cadmium, cobalt, copper, mercury, nickel, silver and zinc in the residues using thermodynamical data. The calculations have been performed with probable solid phases of the trace elements at oxidizing and reducing conditions as a function of pH and at varying concentration of ammonia in the pore water. The thermodynamic calculations have been performed with the geochemical code EQ3NR. The results from the calculations show that as a concentration of 17 mg NH 3 /l in the pore water of the residues increases the solubilities for copper and silver. If the concentration of ammonia increases to 170 mg NH 3 /l will the solubilities increase also for cadmium, nickel and zinc. (12 refs., 39 figs.)

Determination of toxic and essential element concentrations in foodstuffs from local market

International Nuclear Information System (INIS)

Surtipanti; Suwirma; Yumiarti; June, M.; Syaifudin, S.

1989-01-01

Determination of toxic and essential elements concentrations in foodstuffs from local market in Jakarta. Concentration of toxic essential elements, such as, As, Hg, Cr, Pb, Cu, and Zn, in rice, corn bean, small green peas, wheat, vegetables, fruits, tea and coffee, have been determined. As, Hg, Sb, Cr, Se, and Zn, were determined using neutron activation analysis, after being irradiated at TRIGA-MARK II reactor, while Pb and Cu were determined using atomic absorption spectrophotometer. The results obtained were lower than the maximum permissible concentration allowed. (author). 8 refs

Quantification of heavy metals from residual waste and ashes from the treatment plant of residual water Reciclagua and,effects for the health of those workers which manipulate those residuals

International Nuclear Information System (INIS)

Guerrero D, J.J.

2004-01-01

In this work, the technique of leaching using thermostatted column in series is applied, the X-ray diffraction for the identification of the atomic and molecular structure of the toxic metals that are present in the residual muds of the water treatment plant located in the municipality of Lerma Estado de Mexico, named RECICLAGUA, likewise the technique is used of emission spectrometry for plasma and X-ray fluorescence for the qualitative analysis. Its were take samples of residual mud and of incinerated mud of the treatment plant of residual waters of the industrial corridor Toluca -Lerma RECICLAGUA, located in Lerma Estado de Mexico. For this study there were mixed 100 g of residual mud with a solution to 10% of mineral acid or sodium hydroxide according to the case, to adjust the one pH at 2, 5, 7 and 10, it was added bisulfite, of 0.3-1.5 g of dodecyl sulfate sodium and 3.939 of DTPA (triple V) (Diethylene triamine pentaacetate). To this mud and ashes were extracted the toxic and valuable metals by means of the leaching technique using thermostatted columns placed in series that were designed by the Dr. Jaime Vite Torres; it is necessary to make mention that so much the process as the equipment with those that work it was patented by the same one. With the extraction of these metals benefits are obtained, mainly of economic type, achieving the decrease of the volume of those wastes that have been generated; as well as the so much the use of those residuals, once the metals have been eliminated, as of those liquors where the metals were extracted. It was carried out a quantitative analysis using emission spectrometry by plasma in solids by this way to be able to know the content of the present metals in the sample before and later of leaching them, these results reported a great quantity of elements. Another of the techniques employees was the X-ray diffraction analysis that provides an elementary content of the samples, identifying elements that are present in

Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness

Science.gov (United States)

Gariépy, Alexandre; Perron, Claude; Bocher, Philippe; Lévesque, Martin

Shot peening is a surface treatment that consists of bombarding a ductile surface with numerous small and hard particles. Each impact creates localized plastic strains that permanently stretch the surface. Since the underlying material constrains this stretching, compressive residual stresses are generated near the surface. This process is commonly used in the automotive and aerospace industries to improve fatigue life. Finite element analyses can be used to predict residual stress profiles and surface roughness created by shot peening. This study investigates further the parameters and capabilities of a random impact model by evaluating the representative volume element and the calculated stress distribution. Using an isotropic-kinematic hardening constitutive law to describe the behaviour of AA2024-T351 aluminium alloy, promising results were achieved in terms of residual stresses.

Prediction of residual stress using explicit finite element method

Directory of Open Access Journals (Sweden)

W.A. Siswanto

2015-12-01

Full Text Available This paper presents the residual stress behaviour under various values of friction coefficients and scratching displacement amplitudes. The investigation is based on numerical solution using explicit finite element method in quasi-static condition. Two different aeroengine materials, i.e. Super CMV (Cr-Mo-V and Titanium alloys (Ti-6Al-4V, are examined. The usage of FEM analysis in plate under normal contact is validated with Hertzian theoretical solution in terms of contact pressure distributions. The residual stress distributions along with normal and shear stresses on elastic and plastic regimes of the materials are studied for a simple cylinder-on-flat contact configuration model subjected to normal loading, scratching and followed by unloading. The investigated friction coefficients are 0.3, 0.6 and 0.9, while scratching displacement amplitudes are 0.05 mm, 0.10 mm and 0.20 mm respectively. It is found that friction coefficient of 0.6 results in higher residual stress for both materials. Meanwhile, the predicted residual stress is proportional to the scratching displacement amplitude, higher displacement amplitude, resulting in higher residual stress. It is found that less residual stress is predicted on Super CMV material compared to Ti-6Al-4V material because of its high yield stress and ultimate strength. Super CMV material with friction coefficient of 0.3 and scratching displacement amplitude of 0.10 mm is recommended to be used in contact engineering applications due to its minimum possibility of fatigue.

Towards bio monitoring of toxic (lead) and essential elements in ...

African Journals Online (AJOL)

Towards bio monitoring of toxic (lead) and essential elements in whole blood from ... Objectives: Minerals such as zinc, copper, selenium, calcium, and magnesium are essential for normal human development ... One study on the interaction of.

Distribution of potentially toxic elements in urban soils of Bratislava; Distribucia potencialne toxickych prvkov v urbannych podach Bratislavy

Energy Technology Data Exchange (ETDEWEB)

Lahka, L.; Tatarkova, V.; Toth, R. [Univerzita Komenskeho, Prirodovedecka fakulta, Katedra geochemie, 84215 Bratislava (Slovakia)

2013-04-16

Potentially toxic elements naturally occur in soils, but their contents are increased in urban environment due to anthropogenic activities. The main sources of urban soil contamination with potentially toxic elements are chemical, energetic, building and blowing industry, engineering, traffic and municipal waste incineration plants. Contaminated urban soils can pose significant risks to human health trough dust inhalation, soil ingestion, and dermal contact. The primary objectives of the present study were: to assess concentrations of potentially toxic elements in soils of nursery schools, to investigate relationships between potentially toxic elements and physicochemical properties of soils, to identify the main possible sources. (authors)

Relative toxicity and residual activity of insecticides used in blueberry pest management: mortality of natural enemies.

Science.gov (United States)

Roubos, Craig R; Rodriguez-Saona, Cesar; Holdcraft, Robert; Mason, Keith S; Isaacs, Rufus

2014-02-01

A series of bioassays were conducted to determine the relative toxicities and residual activities of insecticides labeled for use in blueberry (Vaccinium corymbosum L.) on natural enemies, to identify products with low toxicity or short duration effects on biological control agents. In total, 14 insecticides were evaluated using treated petri dishes and four commercially available natural enemies (Aphidius colemani Viereck, Orius insidiosus [Say], Chrysoperla rufilabris [Burmeister], and Hippodamia convergens [Guérin-Menéville]). Dishes were aged under greenhouse conditions for 0, 3, 7, or 14 d before introducing insects to test residual activity. Acute effects (combined mortality and knockdown) varied by insecticide, residue age, and natural enemy species. Broad-spectrum insecticides caused high mortality to all biocontrol agents, whereas products approved for use in organic agriculture had little effect. The reduced-risk insecticide acetamiprid consistently caused significant acute effects, even after aging for 14 d. Methoxyfenozide, novaluron, and chlorantraniliprole, which also are classified as reduced-risk insecticides, had low toxicity, and along with the organic products could be compatible with biological control. This study provides information to guide blueberry growers in their selection of insecticides. Further research will be needed to determine whether adoption of a pest management program based on the use of more selective insecticides will result in higher levels of biological control in blueberry.

assessment of toxic elements in selected nigeria broiler feeds using

African Journals Online (AJOL)

User

2015-12-02

Dec 2, 2015 ... toxic elements Mn, Cr, Zn, Fe, Co, Sr, La, Sm, Th and Se in some selected ... However, the results shows the Fe concentration in sample B ..... activation analysis” Applied Radiation and ... Neutron Activation Analysis of Soil.

Determination of essential and toxic elements in clay soil commonly consumed by pregnant women in Tanzania

International Nuclear Information System (INIS)

Mwalongo, D.; Mohammed, N.K.

2013-01-01

A habit of eating clay soil especially among pregnant women is a common practice in Tanzania. This practice known as geophagy might introduce toxic elements in the consumer's body to endanger the health of the mother and her child. Therefore it is very important to have information on the elemental composition of the eaten soil so as to assess the safety nature of the habit. In this study 100 samples of clay soil, which were reported to be originating from five regions in Tanzania and are consumed by pregnant women were analyzed to determine their levels of essential and toxic elements. The analysis was carried out using energy dispersive X-ray fluorescent technique (EDXRF) of Tanzania Atomic Energy Commission, Arusha. Essential elements Fe, Zn, Cu, Se and Mn and toxic elements As, Pb, Co, Ni, U and Th were detected in concentrations above WHO permissible limits in some of the samples. The results from this study show that the habit of eating soil is exposing the pregnant mothers and their children to metal toxicity which is detrimental to their health. Hence, further actions should be taken to discourage the habit of eating soil at all levels. - Highlights: • We assessed exposure of heavy metals to pregnant mothers who consume geophagic soil. • We analyzed 100 samples of soil originated in Tanzania. • The technique used was energy dispersive X-ray fluorescent. • Essential and toxic elements were detected in concentrations above WHO limits. • Hence, geophagy is exposing pregnant mothers and their children to metal toxicity

A study on toxic and essential elements in wheat grain from the Republic of Kazakhstan.

Science.gov (United States)

Tattibayeva, Damira; Nebot, Carolina; Miranda, Jose M; Abuova, Altynai B; Baibatyrov, Torebek A; Kizatova, Maigul Z; Cepeda, Alberto; Franco, Carlos M

2016-03-01

Little information is currently available about the content of different elements in wheat samples from the Republic of Kazakhstan. The concentrations of toxic (As, Cd, Cr, Hg, Pb, and U) and essential (Co, Cu, Fe, Mn, Ni, Se, and Zn) elements in 117 sampled wheat grains from the Republic of Kazakhstan were measured. The results indicated that the mean and maximum concentrations of most investigated elements (As, Cd, Co, Cr, Mn, Se, Pb, and U) were higher in samples collected from southern Kazakhstan. The mean and maximum concentrations of toxic elements such as As, Cd, Hg, and Pb did not exceed levels specified by European, FAO, or Kazakh legislation, although the hazard quotient (HQ) values for Co, Cu, Mn, and Zn were higher than 1 and the hazard index (HI) was higher than 1 for samples collected from all areas of Kazakhstan. This indicates that there should be concern about the potential hazards of the combination of toxic elements in Kazakh wheat.

Assessment of the Essential and Toxic Elements in Complementary ...

African Journals Online (AJOL)

In this study, the commonly used complementary foods (Unga wa Lishe) for children 0-5 years in Tanzania were analyze for essential and toxic elements in order to assess their nutritional levels. 60 samples were purchased from shops in Dar es Salaam, Moshi and Arusha regions and analyzed using Energy Dispersive ...

Toxicity and residual efficacy of chlorantraniliprole, spinetoram, and emamectin benzoate to obliquebanded leafroller (Lepidoptera: Tortricidae).

Science.gov (United States)

Sial, Ashfaq A; Brunner, Jay F

2010-08-01

Studies were conducted to determine the residual toxicity of spinetoram, chlorantraniliprole, and emamectin benzoate to obliquebanded leafroller, Choristoneura rosaceana (Harris) (Lepidoptera: Tortricidae). Larvae were exposed to apple (Malus spp.) foliage collected at different intervals after an airblast sprayer application at the manufacturer-recommended field rate and half the field rate. A mortality of 100% was recorded at field rate applications of spinetoram, chlorantraniliprole, and emamectin benzoate through 59, 38, and 10 d after treatment (DAT), respectively. Significantly less foliage was consumed by C. rosaceana larvae surviving in the emamectin, chlorantraniliprole, and spinetoram treatments compared with those exposed to untreated foliage. Third-instar C. rosaceana exposed to fresh residues on terminal foliage showed 100% mortality after 5-d exposure to spinetoram residues and after 10-d exposure to chlorantraniliprole and emamectin benzoate. The effects of larval movement from foliage with fresh residues was examined by transferring neonate larvae from foliage treated with spinetoram, chlorantraniliprole, or emamectin benzoate to untreated foliage after various exposure intervals. An exposure of 1, 3, and 6 d was required for spinetoram, chlorantraniliprole, and emamectin benzoate to cause 100% mortality at the field rate, respectively. The higher the concentration of chlorantraniliprole and emamectin benzoate, the less exposure time was necessary to cause high levels of mortality in C. rosaceana neonates. Our results indicate that these novel insecticides are highly toxic to C. rosaceana larvae. Implications of these results for C. rosaceana management programs are discussed.

Levels of macroelements and toxic elements in herbal teas

Directory of Open Access Journals (Sweden)

Mihaljev Željko A.

2015-01-01

Full Text Available A total of 14 diverse herbal teas were examined, including: yarrow, basil, St.John’s wort, peppermint, horsetail, nettle, thyme, corn silk, hibiscus, marshmallow, chamomile, rosehip, heather and wild mint. The samples were prepared using the method of microwave digestion, and measurements were performed by the use of inductively coupled plasma mass spectrometry (Cd, Hg, Pb, As, Sb; atomic absorption spectrometry (Mg; emission flame photometry (Ca, K, Na and spectrophotometry (P. Intervals of variation (mg/kg for macroelements were: Ca (2738-35399; P (1545-6264; Mg (1647-7816; Na (293-10629 and K (9683-33985, and for toxic elements: Cd (0.014-0.645; Hg (<0.001- 0.017; Pb (0.064-1.340; As (0.030-0.544 and Sb (0.004-0.068. In the three samples (yarrow and two St.John’s wort samples measured cadmium concentration was higher than the maximum level for dried herbs, recommended by WHO. Ward's hierarchical clustering method was performed with the aim of grouping herbal teas by the amount of toxic elements. [Projekat Ministarstva nauke Republike Srbije, br. TR31071

Determination of toxic elements in tobacco by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Yaprak, G.; Cam, N.F.

1998-01-01

The concentration of toxic elements in the tobacco of six different brands of domestic and two brands of imported cigarettes heavily smoked in Turkey were determined using instrumental neutron activation analysis (INAA)

Potentially toxic elements in foodcrops: Triticum aestivum L., Zea mays L.

Science.gov (United States)

Bini, Claudio; Fontana, Silvia; Squizzato, Stefania; Minello, Fabiola; Fornasier, Flavio; Wahsha, Mohammad

2013-04-01

Soil is the basis of the ecosystems and of our system of food production. Crops can uptake heavy metals and potentially toxic elements from the soil and store them in the roots or translocate them to the aerial parts. Excessive content of these elements in edible parts can produce toxic effects and, through the food chain and food consumption, result in a potential hazard for human health. In this study soils and plants (spring wheat, Triticum aestivum L. and maize, Zea mays L.) from a tannery district in North-East Italy were analyzed to determine pedological characters, soil microbial indicators and the content of some major and micro-nutrients and potentially toxic elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Ni, P, Pb, S, Zn, V). The soils of the area are moderately polluted; Cr is the most important inorganic contaminant, followed by Ni, Cu and V. Factor analysis evidenced that the contaminants are in part anthropogenic and in part geogenic. Major anthropogenic origin was detected for Cr, Ni (from industrial activities), Zn, Cu, Cd (from agriculture practices). Biological Absorption Coefficient (BAC) from soil to plant roots and Translocation factor (TF) within the plant were calculated; major nutrients (K, P, S) and some micronutrients (Cu, Zn, Mg, Mn) are easily absorbed and translocated, whilst other nutrients (Ca, Fe) and potentially toxic elements or micronutrients (Al, Cd, Cr, Ni, Pb, V) are not accumulated in the seeds of the two considered species. However, the two edible species proved differently able to absorb and translocate elements, and this suggests to consider separately every species as potential PHEs transporter to the food chain and to humans. Cr concentrations in seeds and other aerial parts (stem and leaves) of the examined plants are higher than the values found for the same species and for other cereals grown on unpolluted soils. Comparing the Cr levels in edible parts with recommended dietary intake, besides other possible Cr sources

Application of neutron activation analysis to the detrmination of toxic elements in Australian foodstuffs

International Nuclear Information System (INIS)

Fardy, J.J.; McOrist, G.D.; Farrar, Y.J.; Gorman, T.F.; Bowles, C.H.; Tan Mingguang

1988-01-01

Recent measurements in our laboratory have indicated that the average selenium content in the plasma of Australians is 0.09 mg L -1 which is significantly lower than that found in the inhabitants of most other Western countries with the exception of New Zealand. Research aimed at explaining these low levels had begun when an invitation was received from the IAEA to join a Coordinated Research Programme on Nuclear Techniques for Toxic Elements in Foodstuffs. The investigation was widened, therefore, to include other toxic elements, arsenic, mercury, zinc and antimony and the suite of trace elements determined by neutron activation analysis (NAA) techniques. To complete the survey of toxic elements, the lead and cadmium of the chosen foodstuffs are being analysed by anodic stripping voltammetry (ASV) and soon will be examined by inductively coupled plasma mass spectrometry (ICPMS). Drinking water from a number of locations were sampled in cleaned, screw-top polystyrene containers, frozen and stored in a freezer until ready for analysis. 7 refs, 4 figs, 4 tabs

Determination of essential and toxic elements in clay soil commonly consumed by pregnant women in Tanzania

Science.gov (United States)

Mwalongo, D.; Mohammed, N. K.

2013-10-01

A habit of eating clay soil especially among pregnant women is a common practice in Tanzania. This practice known as geophagy might introduce toxic elements in the consumer's body to endanger the health of the mother and her child. Therefore it is very important to have information on the elemental composition of the eaten soil so as to assess the safety nature of the habit. In this study 100 samples of clay soil, which were reported to be originating from five regions in Tanzania and are consumed by pregnant women were analyzed to determine their levels of essential and toxic elements. The analysis was carried out using energy dispersive X-ray fluorescent technique (EDXRF) of Tanzania Atomic Energy Commission, Arusha. Essential elements Fe, Zn, Cu, Se and Mn and toxic elements As, Pb, Co, Ni, U and Th were detected in concentrations above WHO permissible limits in some of the samples. The results from this study show that the habit of eating soil is exposing the pregnant mothers and their children to metal toxicity which is detrimental to their health. Hence, further actions should be taken to discourage the habit of eating soil at all levels.

Strategies for the engineered phytoremediation of toxic element pollution: mercury and arsenic.

Science.gov (United States)

Meagher, Richard B; Heaton, Andrew C P

2005-12-01

Plants have many natural properties that make them ideally suited to clean up polluted soil, water, and air, in a process called phytoremediation. We are in the early stages of testing genetic engineering-based phytoremediation strategies for elemental pollutants like mercury and arsenic using the model plant Arabidopsis. The long-term goal is to develop and test vigorous, field-adapted plant species that can prevent elemental pollutants from entering the food-chain by extracting them to aboveground tissues, where they can be managed. To achieve this goal for arsenic and mercury, and pave the way for the remediation of other challenging elemental pollutants like lead or radionucleides, research and development on native hyperaccumulators and engineered model plants needs to proceed in at least eight focus areas: (1) Plant tolerance to toxic elementals is essential if plant roots are to penetrate and extract pollutants efficiently from heterogeneous contaminated soils. Only the roots of mercury- and arsenic-tolerant plants efficiently contact substrates heavily contaminated with these elements. (2) Plants alter their rhizosphere by secreting various enzymes and small molecules, and by adjusting pH in order to enhance extraction of both essential nutrients and toxic elements. Acidification favors greater mobility and uptake of mercury and arsenic. (3) Short distance transport systems for nutrients in roots and root hairs requires numerous endogenous transporters. It is likely that root plasma membrane transporters for iron, copper, zinc, and phosphate take up ionic mercuric ions and arsenate. (4) The electrochemical state and chemical speciation of elemental pollutants can enhance their mobility from roots up to shoots. Initial data suggest that elemental and ionic mercury and the oxyanion arsenate will be the most mobile species of these two toxic elements. (5) The long-distance transport of nutrients requires efficient xylem loading in roots, movement through the

Equilibrium leaching of toxic elements from cement stabilized soil.

Science.gov (United States)

Voglar, Grega E; Leštan, Domen

2013-02-15

The toxicity characteristics leaching procedure (TCLP) is commonly used to assess the efficiency of solidification/stabilization (S/S) of pollutants in wastes, despite recent objections to this method. In this study, formulations of 7, 10, 15 and 20% (w/w) of calcium aluminate cement (CAC) and sulfate resistant Portland cement (SRC) were used for S/S of soil from brownfield contaminated with 43,149, 10,115, 7631, 6130, 90, 82 mg kg(-1) of Zn, Pb, Cu, As, Cd and Ni, respectively. CAC produced S/S soil monoliths of higher mechanical strength (up to 7.65 N mm(-2)). Mass-transfer analysis indicated surface wash-off as a mechanism of toxic elements release, and equilibrium leaching as a crucial parameter of S/S efficiency assessment. In the expected range of field soil pH after S/S (pH 7-9), the TCLP gave markedly different results than the multi-point pH equilibrium leaching method (using nine targeted pH values): up to 2953-, 94-, 483-, 1.3-, 27- and 1.5-times more Zn, Pb, Cu, As, Cd and Ni, respectively, was determined in the TCLP leachate. S/S with CAC reduced leachability of toxic elements more effectively than SRC. Our results indicate that, under given field conditions, the TCLP significantly underrates the efficiency of S/S of contaminated soil with cementitious binders. Copyright © 2012 Elsevier B.V. All rights reserved.

Analysis of Essential and Toxic Elements in Jujube Fruits Collected ...

African Journals Online (AJOL)

Purpose: To develop a simple and precise method for the determination of the levels of both essential and toxic elements in jujube collected from different locations in China. Methods: Dried jujube fruits collected were digested by optimized microwave procedure. Inductively coupled plasma atomic emission spectrometry ...

Mechanisms behind pH changes by plant roots and shoots caused by elevated concentration of toxic elements

OpenAIRE

Javed, Muhammad Tariq

2011-01-01

Toxic elements are present in polluted water from mines, industrial outlets, storm water etc. Wetland plants take up toxic elements and increase the pH of the medium. In this thesis was investigated how the shoots of submerged plants and roots of emergent plants affected the pH of the surrounding water in the presence of free toxic ions. The aim was to clarify the mechanisms by which these plants change the surrounding water pH in the presence of toxic ions. The influence of Elodea canadensis...

Residual Strength Analysisof Asymmetrically Damaged Ship Hull GirderUsing Beam Finite Element Method

Directory of Open Access Journals (Sweden)

Muhammad Zubair Muis Alie

2016-04-01

Full Text Available The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method isused for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4 and a three-cargo-hold model of a single-side Panamax Bulk Carrierin hogging and sagging conditions. The Smith’s  method  is  adopted  and  implemented  into  Beam  Finite  Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the  cross section  and  three-cargo-hold  model. As a fundamental  case,  the  damage is simply  created  by removing the elements from the cross section, neglecting any welding residual stress and initial imperfection. Also no crack  extension  is considered.  The  result  obtained  by  Beam  Finite  Element  Method  so-called Beam-HULLST is compared to the progressive collapse analysis obtained by HULLST for the validation of the present work. Then, for the three-hold-model, the Beam-HULLST is used to investigate the effect of the rotation of the netral axisboth intact and damage condition taking the one and five frame spaces into account. 

Oral bioaccessibility of toxic and essential elements in raw and cooked commercial seafood species available in European markets

DEFF Research Database (Denmark)

Alves, Ricardo N.; Maulvault, Ana L.; Barbosa, Vera L.

2017-01-01

The oral bioaccessibility of several essential and toxic elements was investigated in raw and cooked commercially available seafood species from European markets. Bioaccessibility varied between seafood species and elements. Methylmercury bioaccessibility varied between 10 (octopus) and 60...... % (monkfish). Arsenic (> 64%) was the toxic element showing the highest bioaccessibility. Concerning essential elements bioaccessibility in raw seafood, selenium (73 %) and iodine (71 %) revealed the highest percentages. The bioaccessibility of elements in steamed products increased or decreased according...

Mobilisation of toxic elements in the human respiratory system

International Nuclear Information System (INIS)

Pinheiro, T.; Alves, L.C.; Palhano, M.J.; Bugalho de Almeida, A.

2001-01-01

The fate of respired particles in the respiratory system is inferred through the chemical characterisation of individual particles at the tracheal and bronchial mucosas, and the accumulation of toxic elements in lung alveoli and lymph nodes. The particles and tissue elemental distributions were identified and characterised using micro-PIXE elemental mapping of thin frozen sections using the ITN Nuclear Microprobe facility. Significant particle deposits are found at the distal respiratory tract. Al, Si, Ti, V, Cr, Fe, Ni, Cu and Zn are elements detected at these accumulation areas. The elemental distributions in the different cellular environments of lymph nodes vary. The major compartments for Al, Si, Ti, Fe and Cr are the phagocytic cells and capsule of lymph nodes, while V and Ni are in the cortex and paracortex medullar areas which retain more than 70% of these two elements, suggesting high solubility of the latter in the cellular milieu. The elemental mobilisation from particles or deposits to surrounding tissues at the respiratory ducts evidences patterns of diffusion and removal that are different than those for elements in the respiratory tract. Mobilisation of elements such as V, Cr and Ni is more relevant at alveoli areas where gaseous exchange takes place. The apparent high solubility of V and Ni in the respiratory tract tissue points towards a deviation of the lymphatic system filtering efficiency for these elements when compared to others

Oral bioaccessibility of toxic and essential elements in raw and cooked commercial seafood species available in European markets

KAUST Repository

Alves, Ricardo N.; Maulvault, Ana L.; Barbosa, Vera L.; Fernandez-Tejedor, Margarita; Tediosi, Alice; Kotterman, Michiel; van den Heuvel, Fredericus H.M.; Robbens, Johan; Fernandes, José O.; Romme Rasmussen, Rie; Sloth, Jens J.; Marques, Antó nio

2017-01-01

The oral bioaccessibility of several essential and toxic elements was investigated in raw and cooked commercially available seafood species from European markets. Bioaccessibility varied between seafood species and elements. Methylmercury bioaccessibility varied between 10 (octopus) and 60% (monkfish). Arsenic (>64%) was the toxic element showing the highest bioaccessibility. Concerning essential elements bioaccessibility in raw seafood, selenium (73%) and iodine (71%) revealed the highest percentages. The bioaccessibility of elements in steamed products increased or decreased according to species. For example, methylmercury bioaccessibility decreased significantly after steaming in all species, while zinc bioaccessibility increased in fish (tuna and plaice) but decreased in molluscs (mussel and octopus).Together with human exposure assessment and risk characterization, this study could contribute to the establishment of new maximum permissible concentrations for toxic elements in seafood by the European food safety authorities, as well as recommended intakes for essential elements.

Oral bioaccessibility of toxic and essential elements in raw and cooked commercial seafood species available in European markets

KAUST Repository

Alves, Ricardo N.

2017-11-17

The oral bioaccessibility of several essential and toxic elements was investigated in raw and cooked commercially available seafood species from European markets. Bioaccessibility varied between seafood species and elements. Methylmercury bioaccessibility varied between 10 (octopus) and 60% (monkfish). Arsenic (>64%) was the toxic element showing the highest bioaccessibility. Concerning essential elements bioaccessibility in raw seafood, selenium (73%) and iodine (71%) revealed the highest percentages. The bioaccessibility of elements in steamed products increased or decreased according to species. For example, methylmercury bioaccessibility decreased significantly after steaming in all species, while zinc bioaccessibility increased in fish (tuna and plaice) but decreased in molluscs (mussel and octopus).Together with human exposure assessment and risk characterization, this study could contribute to the establishment of new maximum permissible concentrations for toxic elements in seafood by the European food safety authorities, as well as recommended intakes for essential elements.

A study on the bonding residual thermal stress analysis of dissimilar materials using boundary element method

International Nuclear Information System (INIS)

Yi, Won; Yu, Yeong Chul; Jeong, Eui Seob; Lee, Chang Ho

1995-01-01

It is very important to evaluate the bonding residual thermal stress in dissimilar materials such as LSI package. In this study, the bonding residual thermal stress was calculated using the boundary element method, varing with the sub-element, geometry of specimen and adhesive thickness. The present results reveal a stress singularity at the edge of the interface, therefore the bonding strength of metal/resin interface can be estimated by taking into account it.

Toxic element composition of multani mitti clay for nutritional safety

International Nuclear Information System (INIS)

Waheed, S.; Faiz, Y.; Rahman, S.; Siddique, N.

2013-01-01

Geophagy of multani mitti (MM) clay is very common in central Pakistan especially amongst women. It was therefore mandatory to establish baseline levels of toxic elements in this clay for its safe dietary consumption by consumers of different genders, age groups and physical states. Instrumental neutron activation analysis and atomic absorption spectrometry techniques were used to determine the nutritional safety of MM clay for oral intake. All quantified toxic elements were detected at trace levels with composition in the descending order; Pb > Br > As > Sb > Hg > Cd. Comparison of these elements in MM clay with other clays shows that As, Cd, and Pb, are lowest in MM clay while its Br and Hg contents are high. Highest weekly dietary intakes of As, Br, Cd, Hg, and Sb were found to be 18, 0.05, 1.6, 9.2 and 1.1 % of the respective recommended provisional tolerable weekly intakes. The findings of this study show that As, Br, Cd, Hg and Sb in MM clay are well below the tolerance levels. However its Pb concentration is very high and may pose health concerns. The data presented in this study can be used as national base level guideline for geophagy of MM clay by men, women (normal, pregnant and lactating) and children. (author)

Wood ash residue causes a mixture of growth promotion and toxicity in Lemna minor.

Science.gov (United States)

Jagodzinski, Lucas S; O'Donoghue, Marian T; Heffernan, Liam B; van Pelt, Frank N A M; O'Halloran, John; Jansen, Marcel A K

2018-06-01

The use of wood as a sustainable biofuel results in the generation of residual wood ash. The ash contains high amounts of plant macronutrients such as phosphorus, potassium, calcium as well as several micronutrients. To explore the potential use of wood ash as a fertiliser, the growth enhancing properties of Sitka spruce (Picea sitchensis Bong.) wood ash were contrasted with the potential toxic action, using common duckweed (Lemna minor L.) as a model test species. The growth of L. minor exposed to wood bottom and fly ash solids and corresponding leachates was assessed in ultra-oligotrophic and eutrophic media. Ash solids and leachates were also tested as neutralized preparations. Suspended ash solids promoted L. minor growth up to concentrations of 2.5-5g/L. Leachates promoted growth up to 10g ash equivalents per litre, but for bottom ash only. Beneficial effects of wood ash were most pronounced on ultra-oligotrophic medium. However, on such nutrient-deficient medium severe inhibition of L. minor biomass and frond growth was observed at relatively low concentrations of fly ash (EC 50 =14g/L). On standard, eutrophic medium, higher concentrations of fly ash (EC 50 =21g/L), or neutralized fly ash (EC 50 =37g/L) were required to impede growth. Bottom ash, or neutralized bottom ash retarded growth at concentrations of 51g/L and 74g/L (EC 50 ), respectively, in eutrophic medium. It appears that phytotoxicity is due to the elemental composition of the ash, its alkaline character, and possible interactions between these two properties. Growth promotion was due to the substantial content of plant nutrients. This study underlines the importance of the receiving environment (nutrient status and pH) in determining the balance between toxicity and growth promotion, and shows that the margin between growth promoting and toxicity inducing concentrations can be enlarged through ash neutralization. Copyright © 2017 Elsevier B.V. All rights reserved.

Bioaccumulation of potentially toxic trace elements in benthic organisms of Admiralty Bay (King George Island, Antarctica)

International Nuclear Information System (INIS)

Majer, Alessandra Pereira; Petti, Mônica Angélica Varella; Corbisier, Thais Navajas; Ribeiro, Andreza Portella; Theophilo, Carolina Yume Sawamura; Ferreira, Paulo Alves de Lima; Figueira, Rubens Cesar Lopes

2014-01-01

Highlights: • Toxic metals were released in the 2012 fire in the Brazilian base at Admiralty Bay. • Potentially toxic metals were measured in eight Antarctic benthos species. • The bioaccumulation of As, Cd and Pb was verified in the studied species. • The biomagnification of Cd is suggested for the studied Antarctic food web. - Abstract: Data about the concentration, accumulation and transfer of potentially toxic elements in Antarctic marine food webs are essential for understanding the impacts of these elements, and for monitoring the pollution contribution of scientific stations, mainly in Admiralty Bay due to the 2012 fire in the Brazilian scientific station. Accordingly, the concentration of As, Cd, Cu, Ni, Pb and Zn was measured in eight benthic species collected in the 2005/2006 austral summer and the relationship between concentration and trophic position (indicated by δ 15 N values) was tested. A wide variation in metal content was observed depending on the species and the element. In the studied trophic positions, it was observed bioaccumulation for As, Cd and Pb, which are toxic elements with no biological function. In addition, Cd showed a positive relationship between concentration and trophic level suggesting the possible biomagnification of this element

Study of the influencing factors of the blood levels of toxic elements in Africans from 16 countries

International Nuclear Information System (INIS)

Henríquez-Hernández, Luis Alberto; Luzardo, Octavio P.; Boada, Luis D.; Carranza, Cristina; Pérez Arellano, José Luis; González-Antuña, Ana; Almeida-González, Maira; Barry-Rodríguez, Carlos; Zumbado, Manuel; Camacho, María

2017-01-01

Africa's economy is growing faster than any other continent and it has been estimated that the middle class in Africa now exceeds 350 million people. This has meant a parallel increase in the importation of consumer goods and in the implementation of communication and information technologies (ICT), but also in the generation of large quantities of e-waste. However, inadequate infrastructure development remains a major constraint to the continent's economic growth and these highly toxic residues are not always adequately managed. Few studies have been conducted to date assessing the possible association between socioeconomic development factors, including e-waste generation, and blood levels of inorganic elements in African population. To disclose the role of geographical, anthropogenic, and socioeconomic development determinants on the blood levels of Ag, Al, As, Be, Cd, Co, Cr, Hg, Ni, Pb, Sb, and V —all of them frequently found in e-waste—, an immigrant population-based study was made including a total of 245 subjects from 16 countries recently arrived to the Canary Islands (Spain). Women presented higher levels of blood elements than men, and Northern Africans (Moroccans) were the most contaminated. People from low-income countries exhibited significantly lower blood levels of inorganic elements than those from middle-income countries. We found a significant association between the use of motor vehicles and the implementation of information and communication technologies (ICT) and the level of contamination. Immigrants from the countries with a high volume of imports of second-hand electronic equipment, telephone and internet use had higher levels of inorganic elements. In general terms, the higher level of economic development the higher the blood levels of inorganic pollutants, suggesting that the economic development of Africa, in parallel to e-waste generation and the existence of informal recycling sites, have directly affected the level of

Determination of essential and toxic elements in tobacco samples from Mexican cigarettes by TXRF

International Nuclear Information System (INIS)

Martinez, T.; Lartigue, J.; Cabrera, L.; Avila-Perez, P.; Zarazua, G.; Tejeda, S.

2005-01-01

Cigarette smoking and tobacco chewing account together for a large number of deaths every day. Numerous studies have identified an important number of inorganic toxic elements along with organic carcinogen and radioactive elements in tobacco. It has been long suspected that, apart from organic and radioactive carcinogens, some inorganic elements may also be the cause of tobacco toxicity, altering the metabolism thus provoking the growth of tumors. In this work we have analyzed 9 different brands of cigarettes sold in the Mexican Market. Macerated tobacco samples after dried, were weighted, placed into the microwave vessel and digested in a mixture of suprapure nitric and hydrochloric acids. The vessel was then sealed and placed into the microwave digestor for dissolution and digestion following the ramp of temperature and pressure. When digestion was completed, the vessels are removed from the digestor, allowed to cool, and transferred to volumetric flaks where they were taken to a volume with de-ionized water. Aliquots of the digestate were analyzed in a Total X-ray Fluorescence Spectrometer Model TX-2000. At the same time and in the same way were treated a NIST 1573 standard of tomato leaves and a blank, the former to chek the elemental recovery and the latter to correct elemental concentration of samples. Results show the presence of some toxic elements such as Pb, Cr, Ni as well as essential elements such as K, Ca, etc. Results were compared with available data on some foreing brands tobacco; the probable reason for the diference in the contents of some of the elements found in Mexican brands are discussed.

The use of biogas plant fermentation residue for the stabilisation of toxic metals in agricultural soils

Science.gov (United States)

Geršl, Milan; Šotnar, Martin; Mareček, Jan; Vítěz, Tomáš; Koutný, Tomáš; Kleinová, Jana

2015-04-01

Our department has been paying attention to different methods of soil decontamination, including the in situ stabilisation. Possible reagents to control the toxic metals mobility in soils include a fermentation residue (FR) from a biogas plant. Referred to as digestate, it is a product of anaerobic decomposition taking place in such facilities. The fermentation residue is applied to soils as a fertiliser. A new way of its use is the in situ stabilisation of toxic metals in soils. Testing the stabilisation of toxic metals made use of real soil samples sourced from five agriculturally used areas of the Czech Republic with 3 soil samples taken from sites contaminated with Cu, Pb and Zn and 2 samples collected at sites of natural occurrence of Cu, Pb and Zn ores. All the samples were analysed using the sequential extraction procedure (BCR) (determine the type of Cu, Pb and Zn bonds). Stabilisation of toxic metals was tested in five soil samples by adding reagents as follows: dolomite, slaked lime, goethite, compost and fermentation residue. A single reagent was added at three different concentrations. In the wet state with the added reagents, the samples were left for seven days, shaken twice per day. After seven days, metal extraction was carried out: samples of 10 g soil were shaken for 2 h in a solution of 0.1M NH4NO3 at a 1:2.5 (g.ml-1), centrifuged for 15 min at 5,000 rpm and then filtered through PTFE 0.45 μm mesh filters. The extracts were analysed by ICP-OES. Copper The best reduction of Cu concentration in the extract was obtained at each of the tested sites by adding dolomite (10 g soil + 0.3 g dolomite). The concentration of Cu in the leachate decreased to 2.1-18.4% compare with the leachate without addition. Similar results were also shown for the addition of fermentation residue (10 g soil + 1 g FR). The Cu concentration in the leachate decreased to 16.7-26.8% compared with the leachate without addition. Lead The best results were achieved by adding

Environmental impact of toxic elements in red mud studied by fractionation and speciation procedures.

Science.gov (United States)

Milačič, Radmila; Zuliani, Tea; Ščančar, Janez

2012-06-01

Aluminum (Al) is mostly produced from bauxite ore, which contains up to 70% of Al(2)O(3) (alumina). Before alumina is refined to aluminum metal, it is purified by hot alkaline extraction. As a waste by-product red mud is formed. Due to its high alkalinity and large quantities, it represents a severe disposal problem. In Kidričevo (Slovenia), red mud was washed with water before disposal, and after drying, covered with soil. In Ajka (Hungary), the red mud slurry was collected directly in a containment structure, which burst caused a major accident in October 2010. In the present work the environmental impact of toxic elements in red mud from Kidričevo and Ajka were evaluated by applying a sequential extraction procedure and speciation analysis. The predominant red mud fraction was the insoluble residue; nevertheless, environmental concern was focused on the highly mobile water-soluble fraction of Al and Cr. Al in the water-soluble Ajka mud fraction was present exclusively in form of toxic [Al(OH)(4)](-), while Cr existed in its toxic hexavalent form. Comparative assessment to red mud from Kidričevo (Slovenia) with a lower alkalinity (pH 9) with that from Ajka demonstrated significantly lower Al solubility and the presence of only trace amounts of Cr(VI), confirming that disposal of neutralized mud is environmentally much more acceptable and carries a smaller risk of ecological accidents. Since during the Ajka accident huge amounts of biologically available Al and moderate Cr(VI) concentrations were released into the terrestrial and aquatic environments, monitoring of Al and Cr(VI) set free during remedial actions at the contaminated site is essential. Particular care should be taken to minimize the risk of release of soluble Al species and Cr(VI) into water supplies and surface waters. Copyright © 2012 Elsevier B.V. All rights reserved.

Baseline toxicity of a chlorobenzene mixture and total body residues measured and estimated with solid-phase microextraction

NARCIS (Netherlands)

Leslie, H.A.; Hermens, J.L.; Kraak, M.H.S.

2004-01-01

Body residues of compounds with a narcotic mode of action that exceed critical levels result in baseline toxicity in organisms. Previous studies have shown that internal concentrations in organisms also can be estimated by way of passive sampling. In this experiment, solid-phase microextraction

Monitoring of toxic elements present in sludge of industrial waste using CF-LIBS.

Science.gov (United States)

Kumar, Rohit; Rai, Awadhesh K; Alamelu, Devanathan; Aggarwal, Suresh K

2013-01-01

Industrial waste is one of the main causes of environmental pollution. Laser-induced breakdown spectroscopy (LIBS) was applied to detect the toxic metals in the sludge of industrial waste water. Sludge on filter paper was obtained after filtering the collected waste water samples from different sections of a water treatment plant situated in an industrial area of Kanpur City. The LIBS spectra of the sludge samples were recorded in the spectral range of 200 to 500 nm by focusing the laser light on sludge. Calibration-free laser-induced breakdown spectroscopy (CF-LIBS) technique was used for the quantitative measurement of toxic elements such as Cr and Pb present in the sample. We also used the traditional calibration curve approach to quantify these elements. The results obtained from CF-LIBS are in good agreement with the results from the calibration curve approach. Thus, our results demonstrate that CF-LIBS is an appropriate technique for quantitative analysis where reference/standard samples are not available to make the calibration curve. The results of the present experiment are alarming to the people living nearby areas of industrial activities, as the concentrations of toxic elements are quite high compared to the admissible limits of these substances.

Thermally induced transformations of iron oxide stabilised APC residues from waste incineration

DEFF Research Database (Denmark)

Sørensen, Mette Abildgaard; Koch, C.B.

2001-01-01

Air pollution control (APC) facilities at waste incinerator plants produce large quantities of solid residues rich in salts and heavy metals. Heavy metals are readily released to water from the residues and it has, therefore, been found suitable to apply a rapid co-precipitation/adsorption process...... as a means to immobilize the toxic elements. In the 'Ferrox process', this immobilization is based on co-precipitation with an Fe(III) oxide formed by oxidation of Fe(II) by air in an aqueous slurry with the APC residue at alkaline pH. In this work we have undertaken a Mossbauer spectroscopy study of the Fe...

Co-ordinated research programme on nuclear techniques for toxic elements in foodstuffs

International Nuclear Information System (INIS)

1990-01-01

This Co-ordinated Research Programme (CRP) was started by the Agency in 1985, within the framework of the Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology in the Asia and Pacific Region (RCA). Its main purpose has been to obtain comparative data on existing elemental concentrations of potentially toxic elements in foodstuffs in various Asian countries. The elements to be studied include the potentially most toxic trace elements (As, Cd, Hg, Pb, Se) as well as others of relevance to national monitoring programmes, such as Br, Cr, Cu, Fe, I, Mn, Sb, Tl, and Zn. An important supplementary purpose of the programme is to help establish analytical expertise for work of this kind in the individual countries. Scientists from several RCA Member States have participated in it, namely from Australia, Bangladesh, China, India, Indonesia, Japan, Malaysia, Pakistan, Thailand, and also from institutes in several countries outside the region, i.e., Argentina, Brazil, Jamaica and The Netherlands. This report summarizes the discussions that took place during the third and final Research Co-ordination Meeting (RCM) for the programme from 20-24 November 1989, in Jakarta, Indonesia. This document includes the progress reports presented by the participants as well as discussions and conclusions drawn from the meeting

Sources of manganese in the residue from a water treatment plant ...

African Journals Online (AJOL)

Disposal of water treatment residue (WTR), the by-product from the production of potable water, has traditionally been to landfill. The shortage of suitable landfill sites has led to the proposal that WTR be applied to land. Such disposal is only possible if the WTR contains no toxic elements that may contaminate soil, water or ...

Historical Fluxes of Toxic Trace Elements and Associated Implications in the Salton Sea Basin

Science.gov (United States)

Odigie, K. O.; Hardisty, D. S.; Geraci, J. B.; Lyons, T. W.

2017-12-01

The Salton Sea is a polymictic, hypersaline lake that is predominantly sustained by wastewater and agricultural runoff from Mexico and the United States. It is a terminal lake that acts as a net sink for toxicants, which in addition to nutrients and increasing salinity, have dramatically transformed the lake over the past century. However, the impacts of these changes on the cycling and bio-accessibility of toxic elements and compounds and their associated human and environmental health implications are not well understood. This project aims to measure and model the fluxes of toxic elements, including selenium, lead, and mercury, in the lake over temporal and spatial scales by using geochemical data from the analysis of sediment cores, a pervasive salt crust, and the water column. The project also aims to elucidate the bio-accessibility and depositional environments of these elements. Preliminary results highlight two different oxygen concentration regimes in the lake: an increasingly anoxic condition in the bottom of the northern lobe and a seasonally variable oxygen deficiency in the bottom of the southern lobe. The deteriorating conditions at the lake could be exacerbated by a receding shoreline, which has already exposed several square kilometres of lake bed and is expected to continue as future inflows are diverted under the Quantification Settlement Agreement. Continued water conservation by Imperial Valley farmers and the increasing reuse of reclaimed water by Mexico are also expected to contribute to reduced inflows to the lake. Therefore, improved understanding of the cycling of toxic elements and their potential remobilization, including via wind entrainment (dust) associated with lake desiccation, will be valuable in protecting human and environmental health within the Salton Sea basin.

Essential and toxic elements in meat of wild birds.

Science.gov (United States)

Roselli, Carla; Desideri, Donatella; Meli, Maria Assunta; Fagiolino, Ivan; Feduzi, Laura

2016-01-01

Essential and toxic elements were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES), mass spectrometry (MS), and atomic absorption (AS) in meat of 14 migratory birds originating from central and northern Europe to provide baseline data regarding game meat consumed in central Italy. In all samples analyzed, cobalt (Co) and chromium (Cr) (total) levels were meat. These findings indicate that elevated Pb concentrations in game ingested by humans may be a cause for concern.

Cadmium Toxicity Affects Phytochemicals and Nutrient Elements Composition of Lettuce (Lactuca sativa L.

Directory of Open Access Journals (Sweden)

Sani Ahmad Jibril

2017-01-01

Full Text Available Lettuce varieties Bombilasta BBL and Italian 167 were treated with different concentrations of cadmium (0, 3, 6, 9, and 12 mg/L in a nutrient film technique (NFT system to study its toxicity on phytochemicals and nutrient elements. Antioxidants analysis which employed DPPH and FRAP, flavonoids, phenolic, vitamin C, malondialdehyde (MDA, and proline indicated significant effects of Cd treatment on the varieties tested. Different concentration levels of Cd lead to positive interactions in FRAP, phenolic, and MDA but no significant effect in flavonoids, vitamin C, and proline. Contents of macro- and microelements in the varieties were significantly affected with increase in the toxicity levels of Cd in all nutrient elements tested with interactions exhibited for iron, manganese, and zinc.

Estimating children's exposure to toxic elements in contaminated toys and children's jewelry via saliva mobilization.

Science.gov (United States)

Guney, Mert; Nguyen, Alain; Zagury, Gerald J

2014-09-19

Children's potential for exposure to potentially toxic elements in contaminated jewelry and toys via mouth contact has not yet been fully evaluated. Various toys and jewelry (metallic toys and jewelry [MJ], plastic toys, toys with paint or coating, and brittle/pliable toys; n = 32) were tested using the saliva extraction (mouthing) compartment of the DIN and RIVM bioaccessibility protocols to assess As, Ba, Cd, Cr, Cu, Mn, Ni, Pb, Sb, and Se mobilization via saliva. Total concentrations of As, Cd, Cu, Ni, Pb, and Sb were found elevated in analyzed samples. Four metals were mobilized to saliva from 16 MJ in significant quantities (>1 μg for highly toxic Cd and Pb, >10 μg for Cu and Ni). Bioaccessible concentrations and hazard index values for Cd exceeded limit values, for young children between 6 mo- and 3 yr-old and according to both protocols. Total and bioaccessible metal concentrations were different and not always correlated, encouraging the use of bioaccessibility for more accurate hazard assessments. Bioaccessibility increased with increasing extraction time. Overall, the risk from exposure to toxic elements via mouthing was high only for Cd and for MJ. Further research on children's exposure to toxic elements following ingestion of toy or jewelry material is recommended.

Evaluation of residual life of material of power plant construction elements after long-term operation

International Nuclear Information System (INIS)

Osasyuk, V.V.

1989-01-01

Existing methods are analyzed for estimation of residual resource of elements of constructions, working in creep conditions. A suggested and experimentally verified new method of residual durability forecasting is described permitting the value of the supplementary resource to be specified according to the real state of the material after preoperation. Evaluation results are given for residual life of steam lines received by different methods and advantages of the technique proposed are shown. Reliability of the new technique is confirmed by steam line operation at thermal power plants

Quantification of heavy metals from residual waste and ashes from the treatment plant of residual water Reciclagua and,effects for the health of those workers which manipulate those residuals; Cuantificacion de metales pesados de lodo residual y cenizas de la planta tratadora de aguas residuales Reciclagua y efectos a la salud de los trabajadores que manipulan los residuos

Energy Technology Data Exchange (ETDEWEB)

Guerrero D, J.J

2004-07-01

In this work, the technique of leaching using thermostatted column in series is applied, the X-ray diffraction for the identification of the atomic and molecular structure of the toxic metals that are present in the residual muds of the water treatment plant located in the municipality of Lerma Estado de Mexico, named RECICLAGUA, likewise the technique is used of emission spectrometry for plasma and X-ray fluorescence for the qualitative analysis. Its were take samples of residual mud and of incinerated mud of the treatment plant of residual waters of the industrial corridor Toluca -Lerma RECICLAGUA, located in Lerma Estado de Mexico. For this study there were mixed 100 g of residual mud with a solution to 10% of mineral acid or sodium hydroxide according to the case, to adjust the one pH at 2, 5, 7 and 10, it was added bisulfite, of 0.3-1.5 g of dodecyl sulfate sodium and 3.939 of DTPA (triple V) (Diethylene triamine pentaacetate). To this mud and ashes were extracted the toxic and valuable metals by means of the leaching technique using thermostatted columns placed in series that were designed by the Dr. Jaime Vite Torres; it is necessary to make mention that so much the process as the equipment with those that work it was patented by the same one. With the extraction of these metals benefits are obtained, mainly of economic type, achieving the decrease of the volume of those wastes that have been generated; as well as the so much the use of those residuals, once the metals have been eliminated, as of those liquors where the metals were extracted. It was carried out a quantitative analysis using emission spectrometry by plasma in solids by this way to be able to know the content of the present metals in the sample before and later of leaching them, these results reported a great quantity of elements. Another of the techniques employees was the X-ray diffraction analysis that provides an elementary content of the samples, identifying elements that are present in

In vivo detection of the toxic heavy elements, lead and cadmium

International Nuclear Information System (INIS)

Thomas, B.J.; Thomas, B.W.; Davey, J.F.; Baddeley, H.; Summers, V.; Craswell, P.

1986-01-01

Portable systems for the in vivo measurement of the toxic heavy elements, cadmium and lead are described. The cadmium concentration in either the liver or left kidney is determined using a technique of thermal neutron capture gamma-ray analysis. X-ray fluorescence analysis is used to measure lead within the bone of the second phalanx of the index finger. Each of the measurements is used as an index of long term exposure to the element and applied to screening of exposed industrial workers. The results of these industrial health applications are presented. Clinical application of the measurements to the study of the involvement of these elements in renal disease is described in brief. (author)

Three-dimensional finite element analysis of residual magnetic field for ferromagnets under early damage

International Nuclear Information System (INIS)

Yao, Kai; Shen, Kai; Wang, Zheng-Dao; Wang, Yue-Sheng

2014-01-01

In this study, 3D finite element analysis is presented by calculating the residual magnetic field signals of ferromagnets under the plastic deformation. The contour maps of tangential and normal RMF gradients are given, and the 3D effect is discussed. The results show that the tangential peak–peak amplitude and normal peak–vale amplitude are remarkably different in 2D and 3D simulations, but the tangential peak–peak width and normal peak–vale width are similar. Moreover, some key points are capable of capturing the plastic-zone shape, especially when the lift-off is small enough. The present study suggests an effective defect identification method with Metal magnetic memory (MMM) technique. - Highlights: • Three-dimensional (3D) finite element analysis is presented by calculating the residual magnetic field signals of ferromagnets under the plastic deformation. • The contour maps of gradients of the tangential and normal residual magnetic fields are given, and the 3D effect is discussed. • The present study suggests an effective defect identification method with metal magnetic memory technique

Prompt gamma neutron activation analysis of toxic elements in radioactive waste packages

Energy Technology Data Exchange (ETDEWEB)

Ma, J.-L. [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance (France); Carasco, C., E-mail: cedric.carasco@cea.fr [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance (France); Perot, B. [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance (France); Mauerhofer, E.; Kettler, J.; Havenith, A. [Institute of Energy and Climate Research - Nuclear Waste Management and Reactor Safety, Forschungszentrum Juelich GmbH (Germany)

2012-07-15

The French Alternative Energies and Atomic Energy Commission (CEA) and National Radioactive Waste Management Agency (ANDRA) are conducting an R and D program to improve the characterization of long-lived and medium activity (LL-MA) radioactive waste packages. In particular, the amount of toxic elements present in radioactive waste packages must be assessed before they can be accepted in repository facilities in order to avoid pollution of underground water reserves. To this aim, the Nuclear Measurement Laboratory of CEA-Cadarache has started to study the performances of Prompt Gamma Neutron Activation Analysis (PGNAA) for elements showing large capture cross sections such as mercury, cadmium, boron, and chromium. This paper reports a comparison between Monte Carlo calculations performed with the MCNPX computer code using the ENDF/B-VII.0 library and experimental gamma rays measured in the REGAIN PGNAA cell with small samples of nickel, lead, cadmium, arsenic, antimony, chromium, magnesium, zinc, boron, and lithium to verify the validity of a numerical model and gamma-ray production data. The measurement of a {approx}20 kg test sample of concrete containing toxic elements has also been performed, in collaboration with Forschungszentrum Juelich, to validate the model in view of future performance studies for dense and large LL-MA waste packages. - Highlights: Black-Right-Pointing-Pointer Comparison between measurements and MCNP calculation has been performed for a PGNAA system. Black-Right-Pointing-Pointer The system aims at controlling the amount of toxic elements in nuclear waste. Black-Right-Pointing-Pointer Simple samples and a concrete cylinder in which impurities have been added are used. Black-Right-Pointing-Pointer Calculations agree within a factor 2 with measurements. Black-Right-Pointing-Pointer The system can be improved with a better neutron flux monitoring and the use of boron-free graphite.

Mobilisation of toxic trace elements under various beach nourishments

International Nuclear Information System (INIS)

Pit, Iris R.; Dekker, Stefan C.; Kanters, Tobias J.; Wassen, Martin J.; Griffioen, Jasper

2017-01-01

To enhance protection and maintain wide beaches for recreation, beaches are replenished with sand: so-called beach nourishments. We compared four sites: two traditional beach nourishments, a mega beach nourishment and a reference without beach nourishment. Two sites contain calcareous-rich sand, whereas the other two sites have calcareous-poor sand. We aimed to understand hydrogeochemical processes to indicate factors critical for the mobility of trace elements at nourishments. We therefore analysed the chemical characteristics of sediment and pore water to ascertain the main drivers that mobilise toxic trace elements. With Dutch Quality Standards for soil and groundwater, the characteristics of sediment and pore water were compared to Target Values (the values at which there is a sustainable soil quality) and Intervention Values (the threshold above which the soil's functions are at risk). The pore water characteristics revealed that Target Values were regularly exceeded, especially for the nourishment sites and mainly for Mo (78%), Ni (24%), Cr (55%), and As (21%); Intervention Values for shallow groundwater were occasionally exceeded for As (2%), Cr (2%) and Zn (2%). The sediment characteristics did not exceed the Target Values and showed that trace elements were mainly present in the fine fraction of <150 μm. The oxidation of sulphide minerals such as pyrite resulted into the elevated concentration for all nourishment sites, especially when an unsaturated zone was present and influence of rainwater was apparent. To prevent trace metal mobility at a mega beach nourishment it is important to retain seawater influences and limit oxidation processes. In this respect, a shoreface nourishment is recommended rather than a mega beach nourishment with a thick unsaturated zone. Consequently, we conclude that whether a site is carbonate-rich or carbonate-poor is unimportant, as the influence of seawater will prevent decalcification, creating a low risk of

Element composition and mineralogical characterisation of air pollution control residue from UK energy-from-waste facilities

Energy Technology Data Exchange (ETDEWEB)

Bogush, Anna [Centre for Resource Efficiency & the Environment (CREE), Department of Civil, Environmental & Geomatic Engineering (CEGE), University College London UCL, Chadwick Building, Gower Street, London WC1E 6BT (United Kingdom); Stegemann, Julia A., E-mail: j.stegemann@ucl.ac.uk [Centre for Resource Efficiency & the Environment (CREE), Department of Civil, Environmental & Geomatic Engineering (CEGE), University College London UCL, Chadwick Building, Gower Street, London WC1E 6BT (United Kingdom); Wood, Ian [Department of Earth Sciences, University College London UCL, Gower Street, London WC1E 6BT (United Kingdom); Roy, Amitava [J. Bennett Johnston, Sr., Center for Advanced Microstructures & Devices, Louisiana State University, 6980 Jefferson Hwy, Baton Rouge, LA 70806 (United States)

2015-02-15

Highlights: • 66 elements, including “critical strategic elements” were determined in UK EfW APC residues. • Metal pollutants (Zn, Pb, As, Cd, Cu, Mo, Sb, Sn, Se, Ag and In) are enriched in APC residues. • Metal pollutants were widely associated with fine deposits of highly soluble CaCl{sub x}OH{sub 2−x}. • Specific metal (Zn, Pb, Cu)-bearing minerals were also detected in APC residues. - Abstract: Air pollution control (APC) residues from energy-from-waste (EfW) are alkaline (corrosive) and contain high concentrations of metals, such as zinc and lead, and soluble salts, such as chlorides and sulphates. The EPA 3050B-extractable concentrations of 66 elements, including critical elements of strategic importance for advanced electronics and energy technologies, were determined in eight APC residues from six UK EfW facilities. The concentrations of Ag (6–15 mg/kg) and In (1–13 mg/kg), as well as potential pollutants, especially Zn (0.26–0.73 wt.%), Pb (0.05–0.2 wt.%), As, Cd, Cu, Mo, Sb, Sn and Se were found to be enriched in all APC residues compared to average crustal abundances. Results from a combination of scanning electron microscopy with energy dispersive X-ray spectroscopy and also powder X-ray diffraction, thermal analysis and Fourier transform infrared spectroscopy give an exceptionally full understanding of the mineralogy of these residues, which is discussed in the context of other results in the literature. The present work has shown that the bulk of the crystalline phases present in the investigated APC residues include Ca-based phases, such as CaCl{sub x}OH{sub 2−x}, CaCO{sub 3}, Ca(OH){sub 2}, CaSO{sub 4}, and CaO, as well as soluble salts, such as NaCl and KCl. Poorly-crystalline aragonite was identified by FTIR. Sulphur appears to have complex redox speciation, presenting as both anhydrite and hannebachite in some UK EfW APC residues. Hazardous elements (Zn and Pb) were widely associated with soluble Ca- and Cl-bearing phases

Occurrence and mobility of toxic elements in coals from endemic fluorosis areas in the Three Gorges Region, SW China.

Science.gov (United States)

Xiong, Yan; Xiao, Tangfu; Liu, Yizhang; Zhu, Jianming; Ning, Zengping; Xiao, Qingxiang

2017-10-01

Fluorine (F) is a topic of great interest in coal-combustion related endemic fluorosis areas. However, little extent research exists regarding the environmental geochemistry of toxic elements that are enriched in coals and coal wastes in traditional endemic fluorosis areas, particularly focusing on their occurrences and mobilities during the weathering-leaching processes of coals and coal wastes in the surface environment. This paper addressed the issue of toxic elements in coals and coal wastes in the Three Gorges Region, Southwest (SW) China, where endemic fluorosis has historically prevailed, and investigated the distribution, occurrence, mobility features, and associated potential health risks. For this purpose, a modified experiment combined with long-term humidity cell test and column leaching trial was applied to elucidate the mobility of toxic elements in coals and coal wastes. In addition, sequential chemical extraction (SCE) was used to ascertain the modes of occurrence of toxic elements. The results demonstrated that the contents of toxic elements in the study area followed the order: stone coals > gangues > coal balls > coals. Furthermore, modes of occurrence of toxic elements were obviously different in coals and coal wastes. For example, cadmium (Cd) was mainly associated with monosulfide fraction in coals, molybdenum (Mo) and arsenic (As) were mainly associated with carbonate and silicate in coal gangues and stone coals, chromium (Cr) mainly existed in silicate and insoluble matter in coal gangues and coal balls, thallium (Tl) mainly occurred in organic matter in stone coals and sulfide in coals, and the occurrence of antimony (Sb) varied with different kinds of samples. Moreover, a large amount of toxic elements released to the leachates during the weathering and leaching process, which might pollute the environment and threaten human health. Based on the geo-accumulation index (I geo ), single factor index (P i ) and Nemerow index (P N ), soils i n

Screen-Printed Electrodes Modified with "Green" Metals for Electrochemical Stripping Analysis of Toxic Elements.

Science.gov (United States)

Economou, Anastasios

2018-03-29

This work reviews the field of screen-printed electrodes (SPEs) modified with "green" metals for electrochemical stripping analysis of toxic elements. Electrochemical stripping analysis has been established as a useful trace analysis technique offering many advantages compared to competing optical techniques. Although mercury has been the preferred electrode material for stripping analysis, the toxicity of mercury and the associated legal requirements in its use and disposal have prompted research towards the development of "green" metals as alternative electrode materials. When combined with the screen-printing technology, such environment-friendly metals can lead to disposable sensors for trace metal analysis with excellent operational characteristics. This review focuses on SPEs modified with Au, Bi, Sb, and Sn for stripping analysis of toxic elements. Different modification approaches (electroplating, bulk modification, use of metal precursors, microengineering techniques) are considered and representative applications are described. A developing related field, namely biosensing based on stripping analysis of metallic nanoprobe labels, is also briefly mentioned.

Residual fatigue life evaluation of rail at squats seeds using 3D explicit finite element analysis

NARCIS (Netherlands)

Deng, X.; Naeimi, M.; Li, Z.; Qian, Z.

2014-01-01

A modeling procedure to predict the residual fatigue life of rail at squats seeds is developed in this article. Two models are involved: a 3D explicit Finite Element (FE) model to compute the stress and strain at squats in rail, and the J-S fatigue damage model to determine the residual fatigue life

Downward Movement of Potentially Toxic Elements in Biosolids Amended Soils

Directory of Open Access Journals (Sweden)

Silvana Irene Torri

2012-01-01

Full Text Available Potentially toxic elements (PTEs in soils are mainly associated with the solid phase, bound to the surface of solid components, or precipitated as minerals. For most PTEs, only a small portion is dissolved in the soil solution. However, there is an interest in following the fate of mobile PTEs in the environment, for a growing amount of evidence indicates that downward movement of PTEs may occur in biosolids amended soils, leading to groundwater contamination. Therefore, it is crucial to understand the factors that control the release of these elements after land application of biosolids, in order to overcome problems related to downward movement of PTEs in the soil profile.

Determination of phytoextraction potential of plant species for toxic elements in soils of abandoned sulphide-mining areas

International Nuclear Information System (INIS)

Freitas, M.C.; Anawar, H.M.; Dionisio, I.; Dung, H.M.; Canha, N.; Bettencourt, A.; Capelo, S.; Henriques, F.; Pinto-Gomes, C.J.

2009-01-01

This study has determined contamination levels in soils and plants from the Sao Domingos mining area, Portugal, by k 0 -INAA. Total concentrations of As, Sb, Cr, Hg, Cu, Zn and Fe in soils were very high, exceeding the maximum limits in Portuguese legislation. Concentrations of toxic elements like As, Sb and Zn were highest in roots of Erica andevalensis, Juncus acutus, Agrostis castellana and Nicotiana glauca. Additionally, As, Br, Cr, Fe, Sb and Zn in all organs of most plants were above toxicity levels. Those species that accumulated relatively high concentrations of toxic elements in roots (and tops) may be cultivated for phytostabilisation of similar areas. (author)

DETERMINATION OF THE RESIDUAL OPERATING TIME OF UNRESTORABLE ELEMENT OF THE ELECTRIC POWER OBJECT AT THE WAYBALL DISTRIBUTION

International Nuclear Information System (INIS)

Namgaladze, D.; Gurgenidze, D.

2007-01-01

In practice, it is often essential to determinethe residual operating time for an unrestorable element of the electric power object which has operated without failure for a certain time. The density of probability distribution of operating time can be determined from the initial probability distribution of operating time. In this work, the relations for determination of the function of residual operating time of the unrestorable element at the exponential and Wayball distributions are analytically derived. (author)

Influence of residual elements in lead on oxygen- and hydrogen-gassing rates of lead-acid batteries

Science.gov (United States)

Lam, L. T.; Ceylan, H.; Haigh, N. P.; Lwin, T.; Rand, D. A. J.

Raw lead materials contain many residual elements. With respect to setting 'safe' levels for these elements, each country has its own standard, but the majority of the present specifications for the lead used to prepare battery oxide apply to flooded batteries that employ antimonial grids. In these batteries, the antimony in the positive and negative grids dominates gassing characteristics so that the influence of residual elements is of little importance. This is, however, not the case for valve-regulated lead-acid (VRLA) batteries, which use antimony-free grids and less sulfuric acid solution. Thus, it is necessary to specify 'acceptable' levels of residual elements for the production of VRLA batteries. In this study, 17 elements are examined, namely: antimony, arsenic, bismuth, cadmium, chromium, cobalt, copper, germanium, iron, manganese, nickel, selenium, silver, tellurium, thallium, tin, and zinc. The following strategy has been formulated to determine the acceptable levels: (i) selection of a control oxide; (ii) determination of critical float, hydrogen and oxygen currents; (iii) establishment of a screening plan for the elements; (iv) development of a statistical method for analysis of the experimental results. The critical values of the float, hydrogen and oxygen currents are calculated from a field survey of battery failure data. The values serve as a base-line for comparison with the corresponding measured currents from cells using positive and negative plates produced either from the control oxide or from oxide doped with different levels of the 17 elements in combination. The latter levels are determined by means of a screening plan which is based on the Plackett-Burman experimental design. Following this systematic and thorough exercise, two specifications are proposed for the purity of the lead to be used in oxide production for VRLA technology.

Arsenic: A Review of the Element's Toxicity, Plant Interactions, and Potential Methods of Remediation.

Science.gov (United States)

Hettick, Bryan E; Cañas-Carrell, Jaclyn E; French, Amanda D; Klein, David M

2015-08-19

Arsenic is a naturally occurring element with a long history of toxicity. Sites of contamination are found worldwide as a result of both natural processes and anthropogenic activities. The broad scope of arsenic toxicity to humans and its unique interaction with the environment have led to extensive research into its physicochemical properties and toxic behavior in biological systems. The purpose of this review is to compile the results of recent studies concerning the metalloid and consider the chemical and physical properties of arsenic in the broad context of human toxicity and phytoremediation. Areas of focus include arsenic's mechanisms of human toxicity, interaction with plant systems, potential methods of remediation, and protocols for the determination of metals in experimentation. This assessment of the literature indicates that controlling contamination of water sources and plants through effective remediation and management is essential to successfully addressing the problems of arsenic toxicity and contamination.

Environmental assessment of incinerator residue utilisation

Energy Technology Data Exchange (ETDEWEB)

Toller, Susanna

2008-10-15

In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerator residue utilisation, particularly bottom ash from municipal solid waste incineration (MSWI). A life cycle assessment (LCA) based approach was outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as well as other emissions to air and water and the use of resources were regarded as constituting the potential environmental impact from the system studied. Case studies were performed for i) road construction with or without MSWI bottom ash, ii) three management scenarios for MSWI bottom ash and iii) three management scenarios for wood ash. Different types of potential environmental impact predominated in the activities of the system and the scenarios differed in use of resources and energy. Utilising MSWI bottom ash in road construction and recycling of wood ash on forest land saved more natural resources and energy than when these materials were managed according to the other scenarios investigated, including dumping in landfill. There is a potential for trace element leaching regardless of how the ash is managed. Trace element leaching, particularly of copper (Cu), was identified as being relatively important for environmental assessment of MSWI bottom ash utilisation. CuO is suggested as the most important type of Cu-containing mineral in weathered MSWI bottom ash, whereas in the leachate Cu is mainly present in complexes with dissolved organic matter (DOM). The hydrophilic components of the DOM were more important for Cu

Parametric study for welding residual stresses in nozzle of nuclear power plants using finite element method

Energy Technology Data Exchange (ETDEWEB)

Kim, Wan Jae; Lee, Kyoung Soo; Kim, Tae Ryong [Korea Electric Power Research Institute, Daejeon (Korea, Republic of); Song, Tae Kwang [Korea Univ., Seoul (Korea, Republic of)

2008-07-01

Distribution of welding residual stresses are mainly characterized by degrees and frequencies of thermal loads applied to materials. However, other effects as component size and clamping condition can also affect stress distributions to a certain extent thus careful manipulation of these parameters based on clear understanding of how they affect residual stresses distributions and why can be additional measure to mitigate residual stresses. This paper discusses aforementioned issues for the case of safety and relief nozzle in nuclear power plant through finite element analysis.

Toxic trace elements in Chilean seafoods

International Nuclear Information System (INIS)

De Gregori, I.; Delgado, D.; Pinochet, H.; Gras, N.; Thieck, M.; Munoz, L.; Bruhn, C.; Navarrete, G.

1992-01-01

Chile is a well known producer and exporter of shell fish. These seafoods, like other specimens of marine origin, are susceptible to environmental and other contaminations like trace elements, including toxicants. Therefore adequate analytical quality assurance is mandatory before accepting analytical results. In this context, use of at least 2 independent methods of determination and validation with certified reference materials (CRM) provides acceptable criteria for judging the reliability of the data. This paper describes sample treatments and analytical procedures for Cd, Cu and Hg determinations in mollusc samples. Three independent analytical techniques, namely differential pulse anodic stripping voltammetry, neutron activation analysis and atomic absorption spectrometry, were used. CRM standards of the IAEA, NIST and BCR were analyzed to evaluate quality assurance. Following the quality control phase, the concentrations of cadmium, copper, and mercury in fresh and canned mollusc samples Tagelus dombeii and Semelle solida (Navajuelas and Almejas chilenas respectively) from different locations were determined. (author). 32 refs.; 4 figs.; 7 tabs

Air Toxics Emissions from Open Burning of Crop Residues in Southeast Asia

Science.gov (United States)

KIM Oanh, N. T.; Permadi, D. A.; Hopke, P. K.; Smith, K. R.; Nguyet, D. A.

2016-12-01

Agricultural crops production in Southeast Asia (SEA) increases annually to meet domestic consumption of growing population and also for export. Crop residue open burning (CROB) is commonly practiced by farmers to quickly dispose of huge amounts of the agricultural waste, such as rice straw, generated after each crop cycle. This CROB activity emits various toxic air pollutants as well as short-lived climate pollutants such as black carbon particles. Our study focused on quantifying the 2015 annual emissions of semi-volatile organic compounds including polycyclic aromatic hydrocarbons (PAHs), dioxins/furans (PCDD/PCDF), organochlorine pesticides (OCP), along with other conventional trace gases, particulate matter, and greenhouse gases from CROB in 10 major agricultural crop producing SEA countries. Crop production statistics and current field OB practices were gathered from our primary surveys and relevant secondary data sources. Emission factors for rice straw and maize residue burning were taken mainly from our measurements in Thailand while for other crops relevant published data were used. The best emission estimates of air toxics from CROB in SEA were 112 g-TEQ/yr of PCDD/PCDF, 33 t/yr of OCP, and 25 Gg/yr of total PAH of which the well-known carcinogenic benzo[a]pyrene was 0.3 Gg/yr. The CROB of rice production had the highest shares of emissions (33-95%) among considered 8 crop types. Indonesia was the top contributor to the total SEA emissions (30-45%) followed by Vietnam (16-26%), Thailand (6-22%) and Myanmar (5-18%). The spatial distributions of emissions, 0.1º x 0.1º, for each specie were prepared using MODIS land cover data. Temporally, higher emissions were observed in the harvesting months of the main rice crops. This emissions database can be used in regional air quality modeling studies to assess the impacts of CROB activity and to promote non-open burning alternatives.

Arabidopsis and the Genetic Potential for the Phytoremediation of Toxic Elemental and Organic Pollutants

Science.gov (United States)

Cobbett, Christopher S.; Meagher, Richard B.

2002-01-01

In a process called phytoremediation, plants can be used to extract, detoxify, and/or sequester toxic pollutants from soil, water, and air. Phytoremediation may become an essential tool in cleaning the environment and reducing human and animal exposure to potential carcinogens and other toxins. Arabidopsis has provided useful information about the genetic, physiological, and biochemical mechanisms behind phytoremediation, and it is an excellent model genetic organism to test foreign gene expression. This review focuses on Arabidopsis studies concerning: 1) the remediation of elemental pollutants; 2) the remediation of organic pollutants; and 3) the phytoremediation genome. Elemental pollutants include heavy metals and metalloids (e.g., mercury, lead, cadmium, arsenic) that are immutable. The general goal of phytoremediation is to extract, detoxify, and hyperaccumulate elemental pollutants in above-ground plant tissues for later harvest. A few dozen Arabidopsis genes and proteins that play direct roles in the remediation of elemental pollutants are discussed. Organic pollutants include toxic chemicals such as benzene, benzo(a)pyrene, polychlorinated biphenyls, trichloroethylene, trinitrotoluene, and dichlorodiphenyltrichloroethane. Phytoremediation of organic pollutants is focused on their complete mineralization to harmless products, however, less is known about the potential of plants to act on complex organic chemicals. A preliminary survey of the Arabidopsis genome suggests that as many as 700 genes encode proteins that have the capacity to act directly on environmental pollutants or could be modified to do so. The potential of the phytoremediation proteome to be used to reduce human exposure to toxic pollutants appears to be enormous and untapped. PMID:22303204

Evaluation of the toxicity of the weathered crude oil used at the Newfoundland Offshore Burn Experiment (NOBE) and the resultant burn residue

International Nuclear Information System (INIS)

Blenkinsopp, S.; Sergy, G.; Doe, K.; Wohlgeschaffen, G.; Li, K.; Fingas, M.

1997-01-01

Toxicity of the weathered crude oil Alberta Sweet Mixed Blend (ASMB) used at the Newfoundland Offshore Burn Experiment (NOBE), and the resultant burn residue was evaluated using the newly developed Environment Canada water-accomodated fraction (WAF) method and exposure protocol. Rainbow trout, three-spine stickleback and gametes of sea urchins were exposed to saltwater WAF prepared from both weathered ASMB and burn residue. Gas chromatography/ mass spectrometry headspace analysis of 28 analytes showed low levels of volatile hydrocarbons after 96 hours of exposure (except for sea urchins, in which case the test was only 20 minutes in duration). All samples were found to be not toxic to all species tested. 10 refs., 2 tabs

The use of Lemna Minor (duckweed) to control the water quality in relation to coal residues. Gebruik van eendekroos voor het bewaken van de waterkwaliteit in relatie met kolenreststoffen

Energy Technology Data Exchange (ETDEWEB)

Janssen-Mommen, J P.M.; Jenner, H A [KEMA Milieu Services, Arnhem (Netherlands)

1993-01-01

Lemna Minor can be applied as a phytomonitor in a standardized test for ecotoxicological investigations of leachate extracts of coal residues and (water)soils. A standardized test method has been developed for fortnight toxicity experiments. The toxicity and the uptake of individual elements were studied in accumulation experiments.Special attention is paid to the impact of the factors complexation, interaction and speciation on the biological availability of the elements. Coal residues and water soils are leached and the leachate extracts are tested for growth restraint by means of the test method. It appears that the use of duckweed as a phytomonitor is a technically simple and reliable method

Screen-Printed Electrodes Modified with “Green” Metals for Electrochemical Stripping Analysis of Toxic Elements

Directory of Open Access Journals (Sweden)

Anastasios Economou

2018-03-01

Full Text Available This work reviews the field of screen-printed electrodes (SPEs modified with “green” metals for electrochemical stripping analysis of toxic elements. Electrochemical stripping analysis has been established as a useful trace analysis technique offering many advantages compared to competing optical techniques. Although mercury has been the preferred electrode material for stripping analysis, the toxicity of mercury and the associated legal requirements in its use and disposal have prompted research towards the development of “green” metals as alternative electrode materials. When combined with the screen-printing technology, such environment-friendly metals can lead to disposable sensors for trace metal analysis with excellent operational characteristics. This review focuses on SPEs modified with Au, Bi, Sb, and Sn for stripping analysis of toxic elements. Different modification approaches (electroplating, bulk modification, use of metal precursors, microengineering techniques are considered and representative applications are described. A developing related field, namely biosensing based on stripping analysis of metallic nanoprobe labels, is also briefly mentioned.

Activation analysis of toxic elements in meat and farinaceous foodstuffs of the Republic of Argentina

International Nuclear Information System (INIS)

Resnizky, S.M.; Bertini, L.M.; Moreno, M.A.; Cohen, I.M.; Videtti Piedracoba, N. de; Pla, R.R.; Gomez, C.D.

1994-01-01

As a result of the industrial and agrochemical developments, there has been an increase of the environmental pollution. Foodstuffs are one of the ways of incorporating some heavy metals or other contaminants into the human body. So, it is important to know the amount of these elements in the food consumed by the population. Our project on determination of toxic elements in meat and farinaceous food largely consumed in our country, was carried out by neutron activation analysis. Different kinds of flours and noodles were analyzed as farinaceous, and hamburgers and sausages as manufactured meat products. Specific separation methods were developed by radiochemical neutron activation analysis for As, Sb, Se, Hg and Cd. All these separations were based on precipitation or coprecipitation of the elements as sulphides. Other elements such as Fe, Br, Co, Zn, Rb, and also Se, were analyzed using instrumental neutron activation analysis. Using daily intake of analyzed foodstuffs from consumption tables and their average elemental composition, an intake of the studied elements was calculated. The values obtained for toxic elements were lower than the maximum permissible levels in Argentina. The results of this project could serve as a basis of a wider study including more foodstuffs as raw meat and will be used by other research groups. (author). 8 refs, 3 figs, 4 tabs

Toxic elements in sediment from two water bodies near Brazilian Multipurpose Reactor: RMB installation area

Energy Technology Data Exchange (ETDEWEB)

Silva, Tatiane B.S.C. da; Stellato, Thamiris B.; Monteiro, Lucilena R.; Marques, Joyce R.; Faustino, Mainara G.; Santos, Camila F.R.T.T.; Oliveira, Cintia C. de; Miranda, Gabrielle S.; Pires, Maria Aparecida F.; Cotrim, Marycel E.B., E-mail: tatianebscs@live.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2017-07-01

Aquatic ecosystems are directly affected by contaminants, such as, toxic elements that do not remain in sediment in a insoluble form. Anthropogenic and natural actions influence sediment dynamics that could lead to a potential contaminant accumulation. Therefore, to evaluate possible environmental impacts is,in many cases, mandatory. Environmental impact assessment studies are a licensing tool that seeks to control degradation activities, taking into account the legal and regulatory provisions and technical standards applicable to the case. The present study aims to evaluate the sediment quality in the area of influence of the Brazilian Multipurpose Nuclear Reactor (RMB) to be installed in the contiguous area of the Experimental Center of Aramar of the Technological Center of the Navy in São Paulo (CTMSP), located in the city of Iperó - SP. The potentially toxic elements As, Cd and Hg were analyzed by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) and Cr, Cu, Ni and Zn by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Results were compared with Canadian Council of Ministers of the Environment (CCME) guideline values (TEL and PEL) and the maximum permitted values of Resolution 454/12. These toxic elements (As, Cd, Hg, Cr, Cu, Ni and Zn) were found below maximum allowed concentrations from national and international legislation. This study provides support for RMB post-completion evaluations, in order to prevent these elements to exceed tolerated levels, ensuring ecological, social and economic values. (author)

Toxic elements in sediment from two water bodies near Brazilian Multipurpose Reactor: RMB installation area

International Nuclear Information System (INIS)

Silva, Tatiane B.S.C. da; Stellato, Thamiris B.; Monteiro, Lucilena R.; Marques, Joyce R.; Faustino, Mainara G.; Santos, Camila F.R.T.T.; Oliveira, Cintia C. de; Miranda, Gabrielle S.; Pires, Maria Aparecida F.; Cotrim, Marycel E.B.

2017-01-01

Aquatic ecosystems are directly affected by contaminants, such as, toxic elements that do not remain in sediment in a insoluble form. Anthropogenic and natural actions influence sediment dynamics that could lead to a potential contaminant accumulation. Therefore, to evaluate possible environmental impacts is,in many cases, mandatory. Environmental impact assessment studies are a licensing tool that seeks to control degradation activities, taking into account the legal and regulatory provisions and technical standards applicable to the case. The present study aims to evaluate the sediment quality in the area of influence of the Brazilian Multipurpose Nuclear Reactor (RMB) to be installed in the contiguous area of the Experimental Center of Aramar of the Technological Center of the Navy in São Paulo (CTMSP), located in the city of Iperó - SP. The potentially toxic elements As, Cd and Hg were analyzed by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) and Cr, Cu, Ni and Zn by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Results were compared with Canadian Council of Ministers of the Environment (CCME) guideline values (TEL and PEL) and the maximum permitted values of Resolution 454/12. These toxic elements (As, Cd, Hg, Cr, Cu, Ni and Zn) were found below maximum allowed concentrations from national and international legislation. This study provides support for RMB post-completion evaluations, in order to prevent these elements to exceed tolerated levels, ensuring ecological, social and economic values. (author)

Persistent free radicals, heavy metals and PAHs generated in particulate soot emissions and residue ash from controlled combustion of common types of plastic

International Nuclear Information System (INIS)

Valavanidis, Athanasios; Iliopoulos, Nikiforos; Gotsis, George; Fiotakis, Konstantinos

2008-01-01

The production and use of polymeric materials worldwide has reached levels of 150 million tonnes per year, and the majority of plastic materials are discarded in waste landfills where are burned generating toxic emissions. In the present study we conducted laboratory experiments for batch combustion/burning of commercial polymeric materials, simulating conditions of open fire combustion, with the purpose to analyze their emissions for chemical characteristics of toxicological importance. We used common types of plastic materials: poly(vinyl chloride) (PVC), low and high density poly(ethylene) (LDPE, HDPE), poly(styrene) (PS), poly(propylene) (PP) and poly(ethylene terephthalate) (PET). Samples of particulate smoke (soot) collected on filters and residue solid ash produced by controlled burning conditions at 600-750 deg. C are used for analysis. Emissions of particulate matter, persistent free radicals embedded in the carbonaceous polymeric matrix, heavy metals, other elements and PAHs were determined in both types of samples. Results showed that all plastics burned easily generating charred residue solid ash and black airborne particulate smoke. Persistent carbon- and oxygen-centered radicals, known for their toxic effects in inhalable airborne particles, were detected in both particulate smoke emissions and residue solid ash. Concentrations of heavy metals and other elements (determined by Inductively Coupled Plasma Emission Spectrometry, ICP, method) were measured in the airborne soot and residue ash. Toxic heavy metals, such as Pb, Zn, Cr, Ni, and Cd were relatively at were found at low concentrations. High concentrations were found for some lithophilic elements, such as Na, Ca, Mg, Si and Al in particulate soot and residue solid ash. Measurements of PAHs showed that low molecular weight PAHs were at higher concentrations in the airborne particulate soot than in the residue solid ash for all types of plastic. Higher-ringed PAHs were detected at higher

Persistent free radicals, heavy metals and PAHs generated in particulate soot emissions and residue ash from controlled combustion of common types of plastic.

Science.gov (United States)

Valavanidis, Athanasios; Iliopoulos, Nikiforos; Gotsis, George; Fiotakis, Konstantinos

2008-08-15

The production and use of polymeric materials worldwide has reached levels of 150 million tonnes per year, and the majority of plastic materials are discarded in waste landfills where are burned generating toxic emissions. In the present study we conducted laboratory experiments for batch combustion/burning of commercial polymeric materials, simulating conditions of open fire combustion, with the purpose to analyze their emissions for chemical characteristics of toxicological importance. We used common types of plastic materials: poly(vinyl chloride) (PVC), low and high density poly(ethylene) (LDPE, HDPE), poly(styrene) (PS), poly(propylene) (PP) and poly(ethylene terephthalate) (PET). Samples of particulate smoke (soot) collected on filters and residue solid ash produced by controlled burning conditions at 600-750 degrees C are used for analysis. Emissions of particulate matter, persistent free radicals embedded in the carbonaceous polymeric matrix, heavy metals, other elements and PAHs were determined in both types of samples. Results showed that all plastics burned easily generating charred residue solid ash and black airborne particulate smoke. Persistent carbon- and oxygen-centered radicals, known for their toxic effects in inhalable airborne particles, were detected in both particulate smoke emissions and residue solid ash. Concentrations of heavy metals and other elements (determined by Inductively Coupled Plasma Emission Spectrometry, ICP, method) were measured in the airborne soot and residue ash. Toxic heavy metals, such as Pb, Zn, Cr, Ni, and Cd were relatively at were found at low concentrations. High concentrations were found for some lithophilic elements, such as Na, Ca, Mg, Si and Al in particulate soot and residue solid ash. Measurements of PAHs showed that low molecular weight PAHs were at higher concentrations in the airborne particulate soot than in the residue solid ash for all types of plastic. Higher-ringed PAHs were detected at higher

The Benefits and Risks of Consuming Brewed Tea: Beware of Toxic Element Contamination

Directory of Open Access Journals (Sweden)

Gerry Schwalfenberg

2013-01-01

Full Text Available Background. Increasing concern is evident about contamination of foodstuffs and natural health products. Methods. Common off-the-shelf varieties of black, green, white, and oolong teas sold in tea bags were used for analysis in this study. Toxic element testing was performed on 30 different teas by analyzing (i tea leaves, (ii tea steeped for 3-4 minutes, and (iii tea steeped for 15–17 minutes. Results were compared to existing preferred endpoints. Results. All brewed teas contained lead with 73% of teas brewed for 3 minutes and 83% brewed for 15 minutes having lead levels considered unsafe for consumption during pregnancy and lactation. Aluminum levels were above recommended guidelines in 20% of brewed teas. No mercury was found at detectable levels in any brewed tea samples. Teas contained several beneficial elements such as magnesium, calcium, potassium, and phosphorus. Of trace minerals, only manganese levels were found to be excessive in some black teas. Conclusions. Toxic contamination by heavy metals was found in most of the teas sampled. Some tea samples are considered unsafe. There are no existing guidelines for routine testing or reporting of toxicant levels in “naturally” occurring products. Public health warnings or industry regulation might be indicated to protect consumer safety.

On the residual stress modeling of shot-peened AISI 4340 steel: finite element and response surface methods

Science.gov (United States)

Asgari, Ali; Dehestani, Pouya; Poruraminaie, Iman

2018-02-01

Shot peening is a well-known process in applying the residual stress on the surface of industrial parts. The induced residual stress improves fatigue life. In this study, the effects of shot peening parameters such as shot diameter, shot speed, friction coefficient, and the number of impacts on the applied residual stress will be evaluated. To assess these parameters effect, firstly the shot peening process has been simulated by finite element method. Then, effects of the process parameters on the residual stress have been evaluated by response surface method as a statistical approach. Finally, a strong model is presented to predict the maximum residual stress induced by shot peening process in AISI 4340 steel. Also, the optimum parameters for the maximum residual stress are achieved. The results indicate that effect of shot diameter on the induced residual stress is increased by increasing the shot speed. Also, enhancing the friction coefficient magnitude always cannot lead to increase in the residual stress.

Screen-Printed Electrodes Modified with “Green” Metals for Electrochemical Stripping Analysis of Toxic Elements

OpenAIRE

Anastasios Economou

2018-01-01

This work reviews the field of screen-printed electrodes (SPEs) modified with “green” metals for electrochemical stripping analysis of toxic elements. Electrochemical stripping analysis has been established as a useful trace analysis technique offering many advantages compared to competing optical techniques. Although mercury has been the preferred electrode material for stripping analysis, the toxicity of mercury and the associated legal requirements in its use and disposal have ...

Finite element analysis for prediction of the residual stresses induced by shot peening II

International Nuclear Information System (INIS)

Kim, Cheol; Seok, Chang Sung; Yang, Won Ho; Ryu, Myung Hai

2002-01-01

Shot peening is a surface impact treatment widely used to improve the performance of metal parts and welded details subjected to fatigue loading, contact fatigue, stress corrosion and other damage mechanisms. The better performance of the peened parts is mainly due to the residual stresses resulting from the plastic deformation of the surface layers of the material caused by the impact of the shot. In this paper the simulation technique is applied to predict the magnitude and distribution of the residual stress and plastic deformation caused by shot peening with the help of finite element analysis

Analysis of toxical element in the whitening cream cosmetic samples using neutron activation analysis (NAA)

International Nuclear Information System (INIS)

Th Rina M; Sunarko

2007-01-01

Neutron activation analysis has been done to analyze of toxical elements that is not allowed in the whitening cream cosmetic. These samples have been randomly selected from the cosmetic market. The samples were irradiated at thermal neutron flux of 10"1"33n.cm"-"2s"-"1 in the irradiation facility of rabbit system in the RSG-GAS reactor Serpong. Counting of irradiated samples have been done by a high resolution HPGe detector couple to multichannel analyzer. Data have been analyzed by GENIE 2000. The sample have been qualitatively determined up to 19 elements. These elements are: As, Br, Ce, Co, Cr, Cs, Eu, Fe, Hg, K, La, Na, Rb, Sb, Se, Sc, Rb, Th, IV, and Zn. The result of qualitative analysis showed that the toxical elements present in the samples are Hg, As, Cr and Sb with the following concentration ranges in μg/g 25.2-65.1, 1.0-6.3, 30.5-89.1 and 2.9-5.3, respectively and these element not allowed in the whitening cream cosmetic. Besides that, the others elements have been detected in the samples are Br, Fe, Zn, Sc and Co, with concentration ranges, 13.1-36.4, 65.6-159.3, 0.79-77.1, 0.5-19.5, and 6.8-31.7 μg/g, respectively, in the sample whitening cream cosmetic. (author)

The finite element analysis for prediction of residual stresses induced by shot peening

International Nuclear Information System (INIS)

Kim, Cheol; Yang, Won Ho; Sung, Ki Deug; Cho, Myoung Rae; Ko, Myung Hoon

2000-01-01

The shot peening is largely used for a surface treatment in which small spherical parts called shots are blasted on a surface of a metallic components with velocities up to 100m/s. This treatment leads to an improvement of fatigue behavior due to the developed compressive residual stresses, and so it has gained widespread acceptance in the automobile and aerospace industries. The residual stress profile on surface layer depends on the parameters of shot peening, which are, shot velocity, shot diameter, coverage, impact angle, material properties etc. and the method to confirm this profile is only measurement by X-ray diffractometer. Despite its importance to automobile and aerospace industries, little attention has been devoted to the accurate modeling of the process. In this paper, the simulation technique is applied to predict the magnitude and distribution of the residual stress and plastic deformation caused by shot peening with the help of the finite element analysis

Natural radionuclides and toxic elements in transboundary rivers of Kazakhstan.

Science.gov (United States)

Solodukhin, V; Poznyak, V; Kabirova, G; Stepanov, V; Ryazanova, L; Lennik, S; Liventsova, A; Bychenko, A; Zheltov, D

2015-06-01

The paper reports on the study of radionuclide and elemental composition of water, bottom sediment and soil samples collected at the border areas of the following transboundary rivers in Kazakhstan: Chagan, Ural, Ilek, Tobol, Ayat, Irtysh, Emel, Ili, Tekes, Shu, Karabalta, Talas and Syrdarya. The employed analyses include the following methods: instrumental gamma-ray spectrometry, radiochemical analysis, neutron activation analysis, XRF and the inductively coupled plasma mass spectrometry (ICP-MS). Evidence of water environment contamination with radionuclides and toxic elements has been revealed in many of the studied rivers both in Kazakhstan and in adjacent countries. Transboundary transfer of the contaminants is most likely related to local industry (uranium mining and processing) and the presence of radioactive substances in the river basins. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Toxic elements and associations with hematology, plasma biochemistry, and protein electrophoresis in nesting loggerhead sea turtles (Caretta caretta) from Casey Key, Florida.

Science.gov (United States)

Perrault, Justin R; Stacy, Nicole I; Lehner, Andreas F; Poor, Savannah K; Buchweitz, John P; Walsh, Catherine J

2017-12-01

Toxic elements (arsenic, cadmium, lead, mercury, selenium, thallium) are a group of contaminants that are known to elicit developmental, reproductive, general health, and immune system effects in reptiles, even at low concentrations. Reptiles, including marine turtles, are susceptible to accumulation of toxic elements due to their long life span, low metabolic rate, and highly efficient conversion of prey into biomass. The objectives of this study were to (1) document concentrations of arsenic, cadmium, lead, mercury, selenium, and thallium in whole blood and keratin from nesting loggerhead sea turtles (Caretta caretta) from Casey Key, Florida and document correlations thereof and (2) correlate whole blood toxic element concentrations to various hematological and plasma biochemistry analytes. Baselines for various hematological and plasma analytes and toxic elements in whole blood and keratin (i.e., scute) in nesting loggerheads are documented. Various correlations between the toxic elements and hematological and plasma biochemistry analytes were identified; however, the most intriguing were negative correlations between arsenic, cadmium, lead, and selenium with and α- and γ-globulins. Although various extrinsic and intrinsic variables such as dietary and feeding changes in nesting loggerheads need to be considered, this finding may suggest a link to altered humoral immunity. This study documents a suite of health variables of nesting loggerheads in correlation to contaminants and identifies the potential of toxic elements to impact the overall health of nesting turtles, thus presenting important implications for the conservation and management of this species. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nuclear techniques for toxic elements in foodstuffs. Report on an IAEA co-ordinated research programme

International Nuclear Information System (INIS)

1994-01-01

The document includes 10 final reports on the IAEA Co-ordinated Research Programme on Nuclear Techniques for Toxic Elements in Foodstuffs. A separate abstract was prepared for each report. Refs, figs and tabs

Nuclear techniques for toxic elements in foodstuffs. Report on an IAEA co-ordinated research programme

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The document includes 10 final reports on the IAEA Co-ordinated Research Programme on Nuclear Techniques for Toxic Elements in Foodstuffs. A separate abstract was prepared for each report. Refs, figs and tabs.

Dietary exposure to essential and potentially toxic elements for the population of Hanoi, Vietnam

DEFF Research Database (Denmark)

Marcussen, H.; Jensen, Bodil Hamborg; Petersen, Annette

2013-01-01

Knowledge of the dietary intake of essential and toxic elements in fast-developing Southeast Asian countries such as Vietnam is limited. Iron and Zn deficiency in Asia is a well-known problem and is partly due to rice constituting a major part of the diet. Dietary habits are changing...... and there is a need to build more knowledge so that authorities can give dietary recommendations. The aim of this study was to determine the total dietary intake of essential and potentially toxic elements and to assess the nutritional quality and food safety risks of the average Hanoi diet. 22 foods or food groups...... were identified and 14 samples of each food group were collected from markets and/or supermarkets in the period 2007-2009. Water spinach, water dropwort, watercress, water mimosa and pond fish are typically produced in wastewater-fed systems. Therefore, these samples were collected both at markets...

Determination of trace and toxic elements in marine sediments collected from the strait of Malacca, Malaysia

International Nuclear Information System (INIS)

Wee Boon Siong; Abdul Khalik Hj. Wood

2007-01-01

The Strait of Malacca has been a major route for international trade with heavy traffic of large vessels navigating through the narrow waterway everyday. Beside, the Strait of Malacca has some natural ecosystem which requires proper protection from human activities. Therefore, the Malaysian government has initiated a project to monitor the pollution level at the Strait of Malacca. As a result, sampling expeditions had been conducted to collect marine samples to be analyzed for trace and toxic elements as well as organic pollutions and radionuclides. The focus of this report is to determine trace and toxic element concentration in surface sediment samples collected from 18 sampling locations at the Strait of Malacca was reported. (author)

Oral bioaccessibility of toxic and essential elements in raw and cooked commercial seafood species available in European markets

NARCIS (Netherlands)

Alves, Ricardo N.; Maulvault, Ana L.; Barbosa, Vera L.; Fernandez-Tejedor, Margarita; Tediosi, Alice; Kotterman, Michiel; Heuvel, van den Fredericus H.M.; Robbens, Johan; Fernandes, José O.; Romme Rasmussen, Rie; Sloth, Jens J.; Marques, António

2017-01-01

The oral bioaccessibility of several essential and toxic elements was investigated in raw and cooked commercially available seafood species from European markets. Bioaccessibility varied between seafood species and elements. Methylmercury bioaccessibility varied between 10 (octopus) and 60%

Trace and toxic elements in foodstuffs in Japan

International Nuclear Information System (INIS)

Muramatsu, Y.; Sumiya, M.; Yanagisawa, K.; Ohmomo, Y.

1994-01-01

Concentrations of trace elements in several foodstuffs collected in Japan were analyzed by neutron activation analysis (NAA), inductively-coupled plasma atomic emission spectrometry (ICP-AES) and anodic striping voltametry (ASV). The elements analyzed were as follows: Zn, Se, As, Hg, Cs, Cr, Co, Fe, Rb, Br and K by NAA; Mn, Ba, Sr, Mg, Ca, P, K, Zn, Cu and Fe by ICP-AES; and Pb, Cd, Cu and Zn by ASV. Because of the high consumption of rice in Japan, the focus of analysis was on this foodstuff. Concentrations of K, Mg, Mn, P and Zn in different polished rice samples were similar, whereas those of Br, Co, Cs, Rb and Se varied. Levels of toxic elements in polished rice were generally lower than those in other foodstuffs. The highest concentrations of As, Hg, Se and Zn were found in marine products, i.e.. Hijiki-algae (As: 59 mg/kg, dry), tuna (Hg: 1.1 mg/kg, dry), bonito (Se: 4.5 mg/kg, dry) and oysters (Zn: 350 mg/kg, dry). Dietary intakes of As, Ca, Cd, Cu, Fe, Hg, K, Mg, Mn, P, Pb, Se and Zn by Japanese were estimated by using these analytical results and published food consumption data in Japan. We have also identified the major sources of the elements in dietary intakes as follows: (a) about 90% of the As was derived from marine products (fish and seaweed); (b) about 70% of the Hg was derived from fish; (c) about 40-60% of the Cd and the Mn and 20-40% of the Zn, Cu and Mg was derived from rice; (d) selenium was mostly derived from fish, meat and eggs; (e) more than 20% of the Ca was derived from milk and milk products; (f) elements such as Fe, K, P and Pb was derived from different sorts of foodstuffs. (author). 7 refs, 1 fig., 7 tabs

Comparative study for toxic elements determination in air particulate reference material by INAA, CCT-ICP-MS, and ICP-MS

International Nuclear Information System (INIS)

Lim, J.M.; Lee, J.H.; Kim, K.H.; Moon, J.H.; Chung, Y.S.

2005-01-01

Although toxic elements are minor components in the atmospheric environment, they play a significant role as important marker for atmospheric science such as risk assessment, long-range transfer study, and source apportionment. Therefore, the techniques, which allow accurate and fast elemental analysis with a minimum pre-treatment, are very important. INAA has a main advantage of non-destruction of air particulate samples, while inductively Coupled plasma with mass spectrometry (ICP-MS) encounters the most significant difficulties in pre-treatment (digestion, fusion, and dilution) and polyatomic spectral interferences for interest toxic elements, Although INAA is still reference method, a number of factors (disadvantages of cost, complexity of the instruments, and scarcity of nuclear reactor) limit its applications. To date, the use of collision cell technology ICP-MS (CCT-ICP-MS) is recommended instead of typical ICP-MS for the analysis of the toxic elements; this is because CCT-ICP-MS technique prevents polyatomic spectral interferences despite of contamination and volatile effects. In this study, a number of toxic elements in reference material, NIST SRM 2783 (air particulate on filter media) were determined by INAA, CCT-ICP-MS, and ICP-MS. For both ICP methods, the filters were decomposed by microwave digestion with 5mL nitric acid. The analytical results by three methods were compared with certificated data; the INAA results showed the most accurate and precise data sets for all target elements among three methods. In detail, the deviation between analytical results and SRM's by INAA fell below 10% for all elements excluding As (14%), while those by CCT-ICP-MS were about 20%. For ICP-MS, the result does not agree with certificated data for several elements, because polyatomic spectral interference (due to 40 Ar 35 Cl, 40 Ar 23 Na, and 35 Cl 16 O) generate positive error of analytical result for As, Cu, and V. Based on our result, INAA is still one of the most

Analysis of toxic elements and macro-micro nutrients in food stuff by using neutron activation analysis

International Nuclear Information System (INIS)

Rina Mulyaningsih, Th.; Istanto; Saeful Yusuf; Siti Suprapti

2010-01-01

Determination of toxic elements and macro-micro nutrient in food stuff by neutron activation analysis (NAA) has been done. The kinds of samples are vegetables, legume, mace and flavor, flour, fish and flesh. Samples had been collected from market in Serpong. Analysis of the samples show macro nutrients with concentration >1000 mg/kg, as K, Ca, Mg, Na, and Cl; micronutrients with concentration 10 - 100 mg/kg: Fe, Mn, Zn, Se, Br, Rb, and La; and toxic elements with concentration below 5 mg/kg as Co, Sb, Hg, As and Cr. As concentration in fish and rice and Hg concentration in fish and red chili is exceed from government permission value. Zinc concentration in some kind of samples is more than permission value, but it should be considered because of its average daily intake is lower then recommended value 15 mg/day. The Zn deficiencies can disturb growth and metabolism. Al concentration in samples is high enough 10 – 500 mg/kg; it must be take into account serious attention because of its toxicity. Evaluation of these elements is compared to sufficiency value of daily requirement RDA (Recommended Daily Acceptable). In this study was discussed potential hazards for human while its deficiencies or excessive intake. (author)

The use of inductively coupled plasma mass spectrometry (ICP-MS) for the determination of toxic and essential elements in different types of food samples

Science.gov (United States)

Voica, C.; Dehelean, A.; Kovacs, M. H.

2012-02-01

Food is the primary source of essential elements for humans and it is an important source of exposure to toxic elements. In this context, levels of essential and toxic elements must be determined routinely in consumed food products. The content of trace elements (As, Pb, Cu, Cd, Zn, Sn, Hg) in different types of food samples (e.g. rice, bread, sugar, cheese, milk, butter, wheat, coffee, chocolate, biscuits pasta, etc.) was determined, using inductively coupled plasma mass spectrometry (ICP-MS). Trace element contents in some foods were higher than maximum permissible levels of toxic metals in human food (Cd in bread, Zn in cheese, Cu in coffee, Hg in carrots and peppers).

Trace element toxicity in VA mycorrhizal cucumber grown on weathered coal fly ash

Energy Technology Data Exchange (ETDEWEB)

Dosskey, M.G.; Adriano, D.C. (University of Georgia, Aiken, SC (United States). Savannah River Ecology Lab.)

1993-11-01

Mycorrhizal colonization is widely recognized as enhancing plant growth on severely disturbed sites. A greenhouse pot experiment was conducted to determine if inoculation with vesicular-arbuscular mycorrhizal (VAM) fungi will enhance vegetation establishment on abandoned coal fly ash basinss, Spores of Glomus intraradices (Schenck and Smith) and Glomus etunicatum (Becker and Gerdemann) were added to weathered precipitator ash (EC-0.91 dSm[sup -1], pH 5.0) and to a pasteurized soils of the same pH (Grossarenic Paleudult, 92% sand, 1% organic matter). Some soil and ash were left unamended as non-mycorrhizal controls. Cucumber (Cucumis sativus L. cv. Poinsette 76) seeds were sown, watered regularly, and fertilized periodically with macronutrient solution. By 8 weeks all ash-grown plants exhibited smaller leaves with leaf margin curl and necrosis, and plant biomass was significantly less (0.75x) than soil-grown plants. Based on analysis of 18 elements in plant tissues, toxicity to B, Mn, or Zn could have caused growth suppression, confirming trace element problems for plant growth on fly ash. For plants grown on fly ash, G. etunicatum was the only fungus that colonized roots (20% of root length reduced from 67% on soil) and it suppressed plant growth to 0.80 x that of uninoculated ash-grown plants. Correspondingly, shoot Zn concentration in G. etunicatum-inoculated plants was 3.5 x higher than in uninoculated plants and at generally toxic levels (273 mg kg[sup -1]). Glomus etunicatum had no other significant effects on elemental concentrations. These results indicate that VAM colonization in acid, weathered fly ash suppressed plant growth by facilitating uptake of Zn to toxic levels, and implies a limitation to successful use of VAM for vegetation establishment on abandoned coal fly ash basins.

Residual-driven online generalized multiscale finite element methods

KAUST Repository

Chung, Eric T.

2015-09-08

The construction of local reduced-order models via multiscale basis functions has been an area of active research. In this paper, we propose online multiscale basis functions which are constructed using the offline space and the current residual. Online multiscale basis functions are constructed adaptively in some selected regions based on our error indicators. We derive an error estimator which shows that one needs to have an offline space with certain properties to guarantee that additional online multiscale basis function will decrease the error. This error decrease is independent of physical parameters, such as the contrast and multiple scales in the problem. The offline spaces are constructed using Generalized Multiscale Finite Element Methods (GMsFEM). We show that if one chooses a sufficient number of offline basis functions, one can guarantee that additional online multiscale basis functions will reduce the error independent of contrast. We note that the construction of online basis functions is motivated by the fact that the offline space construction does not take into account distant effects. Using the residual information, we can incorporate the distant information provided the offline approximation satisfies certain properties. In the paper, theoretical and numerical results are presented. Our numerical results show that if the offline space is sufficiently large (in terms of the dimension) such that the coarse space contains all multiscale spectral basis functions that correspond to small eigenvalues, then the error reduction by adding online multiscale basis function is independent of the contrast. We discuss various ways computing online multiscale basis functions which include a use of small dimensional offline spaces.

Pollution Assessment of Toxic and Potentially Toxic Elements in Agricultural Soils of the City Addis Ababa, Ethiopia.

Science.gov (United States)

Aschale, Minbale; Sileshi, Yilma; Kelly-Quinn, Mary; Hailu, Dereje

2017-02-01

Due to the significantly fast urban expansion and increased industrial activities, the soils in the farms in Addis Ababa are contaminated by some toxic and potentially toxic elements (As, V, Cr, Fe, Co, Ni, Cu, B, Ba, Sr, Zn, Mn, Pb and Cd) in varying degrees. The mean concentrations of Cr, Ni, As and B in most of the soil farms were found to be higher than the maximum recommended limits. The mean concentrations of Cd, Cu, Pb, Co, Ni and Mn were found to be higher than the background soil concentrations given for uncontaminated soils. Multivariate analyses coupled with correlation analysis were used to identify possible sources. The geo-accumulation index values for Cr, Mn and Pb indicated that the farm soils were unpolluted to moderately polluted as a result of anthropogenic activities. A comprehensive environmental management strategy should be formulated by the government to measure further pollution of the farmland soil.

Studies of toxic elements in Bibiani mining area using neutron activation analysis

International Nuclear Information System (INIS)

Quarshie, E.

2008-06-01

The concentrations of the toxic elements As, Cd, Cr and Hg and the potentially toxic and essential elements Al, Br, Ca, Cl, Cu, K, La, Mg, Mn, Na, Sb, Ti, V and Zn in water, soil, tailings, plantain and cassava samples collected from the Bibiani mining area have been measured using instrumental neutron activation analysis (INAA) and preconcentration neutron activation analysis (PNAA). The PNAA method developed involving the use of dithizone as a chelating agent was able to conveniently and efficiently measure concentrations as low as 0.004 mg/kg of Cd in the plantain sample coded HP and 0.002 mg/kg of Hg in the cassava sample coded BSC. INAA could not conveniently measure the concentrations of Cd and Hg in the above samples. All samples were irradiated with thermal neutrons using the Ghana Research Reactor - 1 (GHARR-l) facility. The pH and Eh of the water, soil and tailings were also measured as well as the moisture content of the soil, tailings, plantain and the cassava samples. The pH values of the water samples were in the range 3.9 - 5.93. All these values were below the lower limit of the range 6.5 - 8.5, the WHO pH range for good quality drinking water, indicating pollution. Varying concentrations of the elements AI, As, Br, Ca, Cd, CI, Cr, Cu, Hg, K, La, Mg, Mn, Na, Sb, Ti, V and Zn were measured in the various samples. The concentrations of As measured were in the ranges, 0.04 - 6.08 mg/L in the water samples, 4.6 xl 0-5 - 0.35 % in the soil and tailings and 0.17 - 0.39 mg/kg in the plantain and cassava. The concentrations of cadmium were in the ranges, 0.35 - 2.80 mg/L in water, 0.69 - 4.15 mg/kg in the soil and tailings and 0.04 - 0.21mg/kg in the plantain and cassava. Mercury was in the ranges, 0.34 - 4.93 mg/L in the water, 0.01 - 0.06 mg/kg in the soil and tailings and 0.01 - 0.59 mg/kg in the plantain and cassava. Chromium was 19 - 87 mg/kg in the tailings. In most of the water samples the concentrations of the toxic elements As, Cd and Hg were above

Activation analytical determination of essential and toxic trace elements in biological material

International Nuclear Information System (INIS)

Schelenz, R.

1980-01-01

In order to determine the essential trace elements Hg, Ag, Cu and Se in food (potatoes, milk powder) and biological standard materials (fruit tree leaves), simple, fast radiochemical separation methods are worked out. Following oxidative decomposition and destillation of Hg, the elements silver, copper and selenium are found in the destillation residue and can be electrochemically enriched on an amalgamated Cu foil (determination of Ag and Se in the concentration range of 10 -9 to 10 -8 g, of Cu in the range of 10 -12 to 10 -10 g), whilst the matrix elements Na, K, P are adsorbed on a column with 3 different inorganic ion exchangers. The eluate of the ion exchanger can be added directly to the multielement gamma spectroscopy. The possiblity of working purely instrumentally is demonstrated by 2 examples: multielement analysis of human hair and river water. (RB) [de

Toxic trace element content of local fruits using instrumental neutron activation analysis (INAA)

International Nuclear Information System (INIS)

Siddique, N.; Ahmed, S.; Rahman, A; Waheed, S.; Chaudhary, M.M.; Qureshi, I.H.

1997-01-01

An important route of entry of environmental contaminants into the human system is through food intake. To study the effect of environmental pollution on the food chain, base line levels of toxic element content of commonly available food articles must be established. This study was undertaken to determine the toxic meal content of Pakistani fruits. The techniques of instrumental Neutron Activation Analysis (INAA) and Atomic Absorption Spectrometry (AAS) were employed for this purpose. Fourteen fruits apple, apricot, banana, data guava, kino, mango, melon, orange, peach, pear, plum, pomegranate and watermelon, as well as, the peels of apple and pear have been investigated and the results are discussed in this paper. The results were found to lie within 95 % confidence limit using Student's t test. Hg, As and Sb were detected, using INAA, in pear, pomegranate and water melon in low amounts (ppb levels) but were not detected in orange, plum and melon. Lesser amounts of toxic elements were detected in the peels of pear and high amounts were detected in apple peel as compared to the edible part of the fruit. Cadmium and lead were determined using Graphite Furnace atomic absorption Spectrometry. Cadmium was found to lie in the range of 18-42 ppb, in most fruits, whereas the amount of lead varied between 39-128 ppb. Lead was below detection limit in melon, guava, mango, and peach contained the highest amount of As, Cd, Hg and Pb. (author)

Plant-soil distribution of potentially toxic elements in response to elevated atmospheric CO2.

Science.gov (United States)

Duval, Benjamin D; Dijkstra, Paul; Natali, Susan M; Megonigal, J Patrick; Ketterer, Michael E; Drake, Bert G; Lerdau, Manuel T; Gordon, Gwyneth; Anbar, Ariel D; Hungate, Bruce A

2011-04-01

The distribution of contaminant elements within ecosystems is an environmental concern because of these elements' potential toxicity to animals and plants and their ability to hinder microbial ecosystem services. As with nutrients, contaminants are cycled within and through ecosystems. Elevated atmospheric CO2 generally increases plant productivity and alters nutrient element cycling, but whether CO2 causes similar effects on the cycling of contaminant elements is unknown. Here we show that 11 years of experimental CO2 enrichment in a sandy soil with low organic matter content causes plants to accumulate contaminants in plant biomass, with declines in the extractable contaminant element pools in surface soils. These results indicate that CO2 alters the distribution of contaminant elements in ecosystems, with plant element accumulation and declining soil availability both likely explained by the CO2 stimulation of plant biomass. Our results highlight the interdependence of element cycles and the importance of taking a broad view of the periodic table when the effects of global environmental change on ecosystem biogeochemistry are considered.

Comparison of sample preparation methods for the determination of essential and toxic elements in important indigenous medicinal plant Aloe barbadensis

International Nuclear Information System (INIS)

Sahito, S.R.; Kazi, T.G.; Kazi, G.H.; Jakhrani, M.A.; Wattoo, M.H.S.

2002-01-01

The role of elements particularly traces elements in health and disease is now well established. In this paper we investigate the presence of various elements in very important herb Aloe barbadensis, it is commonly used in different ailments especially of elementary tract. We used four extraction methods for the determination of total elements in Aloe barbadensis. The procedure, which is found to be more efficient and decompose the biological material, is nitric acid and 30% hydrogen peroxide as compared to other method. The sample of plants was collected from surrounding of Hyderabad; Sindh University and vouches specimens were prepared following the standard herbarium techniques. Fifteen essential, trace and toxic elements such as Zn, Cr, K, Mg, Ca, Na, Fe, Pb, Al, Ba, Mn, Co, Ni and Cd were determined in plant and in its decoction. Using Flame Atomic Absorption Spectrophotometer Hitachi Model 180-50. It is noted that, level of essential elements was found high as compare to the level of toxic elements. (author)

Bio- and toxic elements in mushrooms from the city of Umeå and outskirts, Sweden.

Science.gov (United States)

Mędyk, Małgorzata; Grembecka, Małgorzata; Brzezicha-Cirocka, Justyna; Falandysz, Jerzy

2017-08-03

Edible mushrooms (Albatrellus ovinus, Boletus edulis, Clitocybe odora, Gomphidius glutinosus, Leccinum scabrum, Leccinum versipelle, Lycoperdon perlatum, Suillus bovinus, Suillus luteus, and Xerocomus subtomentosus) collected from unpolluted areas of the city of Umeå and its outskirts in the northern part of Sweden were examined for contents of toxic metallic elements (Cd, Pb, and Ag) and essential macro- and microelements (K, Na, Ca, Mg, Cu, Fe, Mn, and Zn) using a validated method and a final measurement by flame atomic absorption spectroscopy (F-AAS). The median values of the toxic metallic element concentrations (in mg kg -1 dry biomass, db) ranged from: 0.12-3.9, 0.46-5.1, and 0.91-6.2 for Ag, Cd and Pb, respectively. For the essential metallic elements, the median values of concentrations ranged from: 24000-58000, 15-2000, 59-610, 520-1900, 2.0-97, 16-150, 15-120, and 4.3-26 mg kg -1 db for K, Na, Ca, Mg, Cu, Zn, Fe, and Mn, respectively. The baseline concentrations of the metallic elements determined in mushrooms were mainly affected by the fungal species. The assessed probable maximal dietary intake of Cd (0.002 mg kg -1 body mass) solely from a mushroom meal was only slightly below a revised value of the tolerable weekly intake for this element, while for Pb (0.003 mg kg -1 body mass) it was tenfold below the provisionally tolerable weekly intake.

Finite element analysis and measurement for residual stress of dissimilar metal weld in pressurizer safety nozzle mockup

International Nuclear Information System (INIS)

Lee, Kyoung Soo; Kim, W.; Lee, Jeong Geun; Park, Chi Yong; Yang, Jun Seok; Kim, Tae Ryong; Park, Jai Hak

2009-01-01

Finite element (FE) analysis and experiment for weld residual stress (WRS) in the pressurizer safety nozzle mockup is described in various processes and results. Foremost of which is the dissimilar simulation metal welding (DMW) between carbon steel and austenitic stainless steel. Thermal and structural analyses were compared with actual residual stress, and actual measurements of. Magnitude and distribution of WRS in the nozzle mockup were assessed. Two measurement methods were used: hole-drilling method (HDM) with strain gauge for residual stress on the surface of the mockup, and block removal and splitting layer (BRSL) method for through-thickness. FE analysis and measurement data showed good agreement. In conclusion, the characteristics of weld residual stress of DMW could be well understood and the simplified FE analysis was verified as acceptable for estimating WRS

Finite element analysis and measurement for residual stress of dissimilar metal weld in pressurizer safety nozzle mockup

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyoung Soo; Kim, W.; Lee, Jeong Geun; Park, Chi Yong; Yang, Jun Seok; Kim, Tae Ryong [Korea Electric Power Research Institute, Daejeon (Korea, Republic of); Park, Jai Hak [Chungbuk University, Cheongju (Korea, Republic of)

2009-11-15

Finite element (FE) analysis and experiment for weld residual stress (WRS) in the pressurizer safety nozzle mockup is described in various processes and results. Foremost of which is the dissimilar simulation metal welding (DMW) between carbon steel and austenitic stainless steel. Thermal and structural analyses were compared with actual residual stress, and actual measurements of. Magnitude and distribution of WRS in the nozzle mockup were assessed. Two measurement methods were used: hole-drilling method (HDM) with strain gauge for residual stress on the surface of the mockup, and block removal and splitting layer (BRSL) method for through-thickness. FE analysis and measurement data showed good agreement. In conclusion, the characteristics of weld residual stress of DMW could be well understood and the simplified FE analysis was verified as acceptable for estimating WRS

Determination of essential and toxic elements in commercial baby foods by instrumental neutron activation analysis and atomic absorption spectrometry

International Nuclear Information System (INIS)

Vallinoto, Priscila

2013-01-01

The World Health Organization recommends that infants should be breast fed exclusively for at least six months after birth. After this period, it is recommended to start introducing complementary foods, in order to meet the child's nutritional, mineral and energy needs. Commercial food products for infants form an important part of the diet for many babies. Thus, it is very important that such food contains sufficient amounts of minerals. Inadequate complementary feeding is a major cause of high rates of infant malnutrition in developing countries. In this study, essential elements: Ca, Cl, Co, Cr, Fe, K, Mg, Mn, Na, Se and Zn and toxic elements: As, Cd, Hg levels were determined in twenty seven different commercial infant food product samples by Instrumental Neutron Activation Analysis (INAA) and Atomic Absorption Spectrometry (AAS). In order to validate both methodologies the reference material: INCT MPH-2 Mixed Polish Herbs and NIST - SRM 1577b Bovine Liver by INAA and NIST - SRM 1548th Typical Diet and NIST - SRM 1547 Peach Leaves by AAS were analyzed. The twenty seven baby food samples were acquired from Sao Paulo city supermarkets and stores. Essential and toxic elements were determined. Most of the essential element concentrations obtained were lower than the World Health Organization requirements, while concentrations of toxic elements were below the tolerable upper limit. These low essential element concentrations in these samples indicate that infants should not be fed only with commercial complementary foods. (author)

Polychlorinated Biphenyls (PCB) Residue Effects Database

Data.gov (United States)

U.S. Environmental Protection Agency — The PCB Residue Effects (PCBRes) Database was developed to assist scientists and risk assessors in correlating PCB and dioxin-like compound residues with toxic...

Potentially Toxic Elements and Health Risk Assessment in Farmland Systems around High-Concentrated Arsenic Coal Mining in Xingren, China

Directory of Open Access Journals (Sweden)

Ying-ju Li

2018-01-01

Full Text Available The health risk of potentially toxic elements (PTEs via contamination of the food chain has attracted widespread concern. The aim of this study is to evaluate the effects of PTEs in environment and human body (fingernail, hair, and blood of people living in agricultural soil near arsenic coal mining areas in Xingren County (Guizhou, southwest China. 89 crop samples which included vegetables, rice, maize, and coix seed and their corresponding soils and 17 local surface water and biological tissue samples (41 × 3 in near arsenic coal mining areas were collected, and the concentrations of potentially toxic elements (As, Cd, Cu, Cr, and Pb in all the samples were determined. The health risk assessment methods developed by the United States Environmental Protection Agency were employed to explore the potential health hazards of PTEs in soils growing crops. Results showed that 4 toxic elements, Cd, Cu, As, and Cr, were found to have different degrees of contamination in soils in the studied area. The total concentration of toxic elements (As, Cr, Cu, and Pb in fingernail, hair, and blood samples were 90.50, 69.31, and 6.90 mg·kg−1, respectively. Fingernail samples from females were more likely to show exposure to trace metals compared to males. As the age of the subject increased, the concentration of As also increased in all three biological samples. The risk assessment for the mean hazard index value from the consumption of local food crops was 14.81, indicating that consumers may experience adverse, noncarcinogenic health effects. The estimated mean total cancer risk value of was 5.3 × 10−3, which was approximately 10 to 1000 times higher than the acceptable range of 10−6–10−4, indicating serious carcinogenic risks for local people consuming crops from the area. This study provides evidence that local residents in this study area may be at a high risk of disease caused from toxic element exposure.

In which regions is breast-feeding safer from the impact of toxic elements from the environment?

OpenAIRE

Cinar, Nursan; Ozdemir, Sami; Yucel, Oya; Ucar, Fatma

2011-01-01

Owing to its unique nutritional and immunological characteristics, breast milk is the most important food source for infants. But, children are at greater risk for exposure to environmental toxicants from breast milk. The aim of this study was to evaluate the influence of environmental pollution on essential and toxic element contents of breast milk and determine the risky locations in our population. This study was conducted on women who were breastfeeding (n=90). Milk samples were collected...

Application of neutron activation analysis and inductively coupled plasma mass spectrometry to the determination of toxic and essential elements in Australian foods

International Nuclear Information System (INIS)

Fardy, J.J.; McOrist, G.D.; Bowles, C.J.; Farrar, Y.J.; Warner, I.M.

1990-01-01

Current Australian legislation specifies the maximum permitted levels of nine toxic elements in foods while the National Health and Medical Research Council (NH and NRC) has listed recommended daily intake figures for seven essential elements. This investigation examined the compliance of Australian foods with both these requirements. Australia-wide samples of representative foods from the diets of Australians were used in this study after the NH and NRC kindly permitted us to join their Market Basket (Noxious Substance) Survey. Both toxic and essential element concentrations in these foods were determined using the advanced analytical techniques of instrumental and radiochemical neutron activation analysis and inductively coupled plasma mass spectrometry. With very few exceptions foods do not exceed the maximum, permitted levels for toxic substances. Daily intake figures for essential elements generally lie close to the maximum recommended values listed by NH and NRC. (author). 11 refs, 22 figs, 17 tabs

Toxicity potential of residual ethylene oxide on fresh or frozen embryos maintained in plastic straws.

Science.gov (United States)

Schiewe, M C; Schmidt, P M; Pontbriand, D; Wildt, D E

1988-01-01

The toxic effects of residual ethylene oxide (EtO), a frequently used gas-sterilant, on embryos either frozen for long-term purposes or stored acutely for 30 min to 9 hr in a fresh condition in 0.25-ml straw containers were evaluated. In Experiment 1, fresh embryos were frozen (using conventional technology) in straws previously aerated for 0 hr to 8 mo after EtO sterilization. With the exception of the 8-mo group in which survival and quality ratings were depressed, embryo viability was not affected significantly by short-term prefreeze and post-thaw exposure to EtO residues. Experiment 2 was conducted to analyze the influence of prefreeze exposure to EtO residues on embryo development in vitro for embryos temporarily stored in previously sterilized straws aerated for different intervals. Compared to non-EtO-sterilized control straws, the development, quality, and viability of embryos exposed to EtO-treated straws were compromised (p less than 0.05) as the aeration interval decreased and the exposure interval increased. The combined results of both experiments indicate that EtO-treated straws can be used to cryopreserve gametes efficiently, but only if the aeration interval is greater than or equal to 72 hr and the prefreeze duration of exposure is less than or equal to 3 hr.

Assessment of sediments from Tiete River - toxicity and trace elements - from Salesopolis to Suzano counties, Sao Paulo, Brazil

International Nuclear Information System (INIS)

Alegre, Gabriel F.; Borrely, Sueli; Nascimento, Thuany M.; Favaro, Deborah I.T.

2009-01-01

In the present study, sediment samples from the Tiete River were evaluated for toxicity and trace metals (5 sampling sites). The studied region includes Salesopolis to Suzano and surroundings, a highly industrialized area. The study involved toxicity evaluation (sediment, elutriate and pore-water) and the distribution of some major, trace and rare earth elements on sediments. Multielemental analysis was carried out by instrumental neutron activation analysis (INAA) and total mercury by cold vapor atomic absorption technique (CV AAS). The concentration values obtained for the metals As, Cr, Hg and Zn in the sediment samples were compared to the Canadian Council of Minister of the Environment (CCME) oriented values (TEL and PEL). Regarding toxicity, whole sediments and elutriate fractions were evaluated using chronic assays for Ceriodaphnia dubia, while the pore water was carried out for Vibrio fischeri toxicity assays. These assays followed Brazilian Standardized Methods (ABNT). Whole sediments and elutriate evidenced negative biological effects, even at Salesopolis county, the control site (less impacted area). The worst effects were obtained at Mogi das Cruzes and Suzano counties (sampling stations 3 and 4). The elutriate fractions collected at the same stations showed acute toxicity in two of three samples (C. dubia). When pore water was evaluated, a toxicity gradient which increased as the river flowed through Mogi das Cruzes county was obtained. Regarding toxic metal contents in the sediment samples points 3 and 4 exceeded the TEL oriented values for As, Cr, Hg and Zn and point 4 also exceeded the PEL values for all these elements. (author)

Lethal critical body residues as measures of Cd, Pb, and Zn bioavailability and toxicity in the earthworm Eisenia fetida

Energy Technology Data Exchange (ETDEWEB)

Conder, J.M.; Lanno, R.P. [Oklahoma State Univ., Dept. of Zoology, Stillwater, OK (United States)

2003-07-01

Background. Earthworm heavy metal concentrations (critical body residues, CBRs) may be the most relevant measures of heavy metal bioavailability in soils and may be linkable to toxic effects in order to better assess soil ecotoxicity. However, as earthworms possess physiological mechanisms to secrete and/or sequester absorbed metals as toxicologically inactive forms, total earthworm metal concentrations may not relate well with toxicity. Objective. The objectives of this research were to: i) develop LD{sub 50}s (total earthworm metal concentration associated with 50% mortality) for Cd, Pb, and Zn; ii) evaluate the LD{sub 50} for Zn in a lethal Zn-smelter soil; iii) evaluate the lethal mixture toxicity of Cd, Pb, and Zn using earthworm metal concentrations and the toxic unit (TU) approach; and iv) evaluate total and fractionated earthworm concentrations as indicators of sublethal exposure. Methods. Earthworms (Eisenia fetida (Savigny)) were exposed to artificial soils spiked with Cd, Pb, Zn, and a Cd-Pb-Zn equitoxic mixture to estimate lethal CBRs and mixture toxicity. To evaluate the CBR developed for Zn, earthworms were also exposed to Zn-contaminated field soils receiving three different remediation treatments. Earthworm metal concentrations were measured using a procedure devised to isolate toxicologically active metal burdens via separation into cytosolic and pellet fractions. (orig.)

Potential for thermochemical conversion of biomass residues from the integrated sugar-ethanol process - Fate of ash and ash-forming elements.

Science.gov (United States)

Dirbeba, Meheretu Jaleta; Brink, Anders; DeMartini, Nikolai; Zevenhoven, Maria; Hupa, Mikko

2017-06-01

In this work, potential for thermochemical conversion of biomass residues from an integrated sugar-ethanol process and the fate of ash and ash-forming elements in the process are presented. Ash, ash-forming elements, and energy flows in the process were determined using mass balances and analyses of eight different biomass samples for ash contents, elemental compositions, and heating values. The results show that the ash content increases from the sugarcane to the final residue, vinasse. The cane straw, which is left in the field, contains one-third of the energy and 25% of the K and Cl while the vinasse contains 2% of the energy and 40% of the K and Cl in the cane. K and Cl in biomass fuels cause corrosion and fouling problems in boilers and gasifiers. Over 85% of these elements in the straw are water soluble indicating that water leaching would improve it for utilization in thermochemical conversion. Copyright © 2017 Elsevier Ltd. All rights reserved.

Predictions of the residue cross-sections for the elements Z=113 and Z=114

OpenAIRE

Bouriquet, Bertrand; Abe, Yasuhisa; Kosenko, Grigori

2003-01-01

An extremely good reproduction of experimental excitation function of the 1n reactions producing Z=110,Z=111 and Z=112 is obtained by the two-step model and the statistical decay code KEWPIE. Thus, an extension of the recipe permits us to predict reliable values of the residue cross-sections of the elements Z=113 and Z=114 which will be a useful guide for planning of experiments.

Duckweed Lemna minor as a tool for testing toxicity of coal residues and polluted sediments

Energy Technology Data Exchange (ETDEWEB)

Jenner, H.A.; Janssen-Mommen, J.P.M. (Kema Environmental Services, Arnhem (Netherlands))

1993-07-01

Duckweed, Lemna minor, was used for testing single elements and leachates of coal ashes and sediments by expressing growth as surface coverage. The EC50 for the elements Cd, Cu, Zn, As(III), As(V), Se(IV), Se(VI), SeO[sub 2] were 0.86, 2.2, 4.4, 8.4, 297, 21, 67, 37 [mu]M respectively. Leachates were tested of pulverized coal fuel ash (PFA), including 'low NO[sub x]' ashes, coal gasification slag (CGS), and, as a reference, the polluted sediments of a canal. The concentrations of elements in leachates of 'low NO[sub x]' PFA were higher than those in leachates of conventional PFA. The leaching of anions from PFA was quicker than the cations. CGS showed an absolutely minimal element leaching. Comparison of the effects of conventional PFA with sediments from Rotterdam harbor, River Rhine, and the canal shows PFA to be the far less toxic one. The sediment samples from the canal demonstrated strong growth inhibition, probably due to high zinc concentrations originating from industrial activity.

Duckweed Lemna minor as a tool for testing toxicity of coal residues and polluted sediments

Energy Technology Data Exchange (ETDEWEB)

Jenner, H A; Janssen-Mommen, J P.M. [Kema Environmental Services, Arnhem (Netherlands)

1993-07-01

Duckweed, Lemna minor, was used for testing single elements and leachates of coal ashes and sediments by expressing growth as surface coverage. The EC50 for the elements Cd, Cu, Zn, As(III), As(V), Se(IV), Se(VI), SeO[sub 2] were 0.86, 2.2, 4.4, 8.4, 297, 21, 67, 37 [mu]M respectively. Leachates were tested of pulverized coal fuel ash (PFA), including 'low NO[sub x]' ashes, coal gasification slag (CGS), and, as a reference, the polluted sediments of a canal. The concentrations of elements in leachates of 'low NO[sub x]' PFA were higher than those in leachates of conventional PFA. The leaching of anions from PFA was quicker than the cations. CGS showed an absolutely minimal element leaching. Comparison of the effects of conventional PFA with sediments from Rotterdam harbor, River Rhine, and the canal shows PFA to be the far less toxic one. The sediment samples from the canal demonstrated strong growth inhibition, probably due to high zinc concentrations originating from industrial activity.

Hazardous properties of paint residues from the furniture industry.

Science.gov (United States)

Vaajasaari, Kati; Kulovaara, Maaret; Joutti, Anneli; Schultz, Eija; Soljamo, Kari

2004-01-30

The objective of this study was to screen nine excess paint residues for environmental hazard and to evaluate their disposability in a non-hazardous or hazardous-waste landfill. These residues were produced in the process of spray-painting furniture. Residues were classified according to their leaching and ecotoxicological properties. Leaching properties were determined with the European standard SFS-EN 12457-2 leaching-test. The toxicity of the leaching-test eluates was measured with plant-, bacteria- and enzyme-inhibition bioassays. Total organic carbon, formaldehyde and solvent concentrations in the solid wastes and in the leaching-test eluates were analysed. It seemed likely that leached formaldehyde caused very high acute toxicity in leaching-test eluates of the dry-booth residues. This hypothesis was based on the fact that the formaldehyde concentrations in the leaching-test eluates of the dry-booth residues were 62-75 times higher than the EC50 value reported in the literature for formaldehyde. The results of the water-curtain booth residues showed that the samples with the highest TOC and aromatic solvent concentrations were also the most toxic. The studied excess paint residues were complex organic mixtures and contained large amounts of compounds not identifiable from chemical data. Therefore, the evaluation of the hazard based solely on available chemical data is unlikely to be sufficient, as evidenced by our study. Our results show that harmful compounds remain in the solid waste and the toxicity results of their leaching-test eluates show that toxicity may leach from residues in contact with water at landfill sites. They also confirm the benefit of combining chemical and ecotoxicological assays in assessing the potential environmental hazard of complex organic mixtures found in wastes. Copyright 2003 Elsevier B.V.

Contents of toxic elements in biological environment of pregnant women of all reproductive age give birth first time

Directory of Open Access Journals (Sweden)

Markevych V.V.

2016-09-01

Full Text Available Purpose — to investigate the toxic contents of microelements in serum and erythrocytes of pregnant women in the early, middle and old reproductive age in the case of the first delivery. Patients and methods. The study was conducted in the third trimester of pregnancy on 36.08±0.59 weeks of gestation. Reproductive age of pregnant women was 16.33±0.21, 24.67±0.37 and 36.14±0.77 years respectively. The content of toxic ME (chromium, nickel, lead and cobalt in the biological substrates was determined by atomic absorption spectrophotometer C — 115 MI. Results. We found that pregnant women regardless of reproductive age who gave birth for the first time had high level of nickel both in serum and in red blood cells. With the growth of reproductive age we saw accumulation of toxic chromium in serum. Much less content of cadmium in red blood cells and possibly other tissues in pregnant women of older reproductive age apparently linked to the more conscious and responsible attitude to their health condition, the process of pregnancy and a healthy lifestyle and above except the main source of cadmium — smoking. The lowest content of lead in red blood cells is determined in the women of middle reproductive age. At the same time serum and erythrocytic content of lead in any group was not higher its level in healthy pregnant women. Conclusion. Nowadays very actual is researching of placenta as a body that provides trace element balance in system «mother—placenta—fetus». To determine the role of placenta in protecting the fetus from exposure of toxic elements reasonable is investigation of their content in the placenta and its functions — barrier penetration, depositing of essential and toxic elements.

Extraction of toxic and valuable metals from wastewater sludge and ash arising from RECICLAGUA, a treatment plant for residual waters applying the leaching technique; Extraccion de metales toxicos y valiosos de los desechos de lodos y cenizas provenientes de la planta tratadora de aguas residuales RECICLAGUA aplicando la tecnica de lixiviado

Energy Technology Data Exchange (ETDEWEB)

Guerrero D, J J

2004-07-01

Presently work, the technique is applied of having leached using coupled thermostatted columns, the X-ray diffraction for the identification of the atomic and molecular structure of the metals toxic that are present in the residual muds of a treatment plant of water located in the municipality of the Estado de Mexico, RECICLAGUA, likewise the techniques is used of Inductively Coupled Plasma Mass Spectroscopy and X-ray fluorescence analysis for the qualitative analysis. We took samples of residual sludge and incinerated ash of a treatment plant waste water from the industrial corridor Toluca-Lerma RECICLAGUA, located in Lerma, Estado de Mexico. For this study 100 g. of residual of sludge mixed with a solution to 10% of mineral acid or sodium hydroxide according to the case, to adjust the one p H at 2, 5, 7 and 10, bisulfite was added, of 0.3-1.5 g of dodecyl sulfate of sodium and 3.93 g of DTPA (triple V). Diethylene triamine penta acetate. These sludges and ashes were extracted from toxic and valuable metals by means of the leaching technique using coupled thermostated columns that which were designed by Dr. Jaime Vite Torres, it is necessary to make mention that so much the process as the apparatus with those that one worked was patented by him same. With the extraction of these metals, benefits are obtained, mainly of economic type, achieving the decrease of the volume of those wastes that have been generated; as well as the so much use of those residuals, once the metals have been eliminated, as of those residuals, once the metals have been eliminated, as of those liquors, the heavy metals were extracted. It was carried out a quantitative analysis using Icp mass spectroscopy, this way to be able to know the one content of the present metals in the samples before and after of leaching them, these results reported a great quantity of elements. Another of the techniques employees was the analysis by X-ray diffraction that provides an elementary content of the

The effect of potentially toxic elements and sewage sludge on the activity of regulatory enzyme glutamate kinase

Czech Academy of Sciences Publication Activity Database

Pavlíková, D.; Pavlík, Milan; Staszková, L.; Tlustoš, P.; Száková, J.; Balík, J.

2007-01-01

Roč. 53, č. 5 (2007), s. 201-206 ISSN 1214-1178 Institutional research plan: CEZ:AV0Z50380511 Keywords : Proline regulation * toxic elements * plant stress metabolism * chronic stress Subject RIV: ED - Physiology

Thermal treatment of solid residues from WtE units: a review.

Science.gov (United States)

Lindberg, Daniel; Molin, Camilla; Hupa, Mikko

2015-03-01

Thermal treatment methods of bottom ash, fly ash and various types of APC (air pollution control) residues from waste-to-energy plants can be used to obtain environmentally stable material. The thermal treatment processes are meant to reduce the leachability of harmful residue constituents, destroy toxic organic compounds, reduce residue volume, and produce material suitable for utilization. Fly ash and APC residues often have high levels of soluble salts, particularly chlorides, metals such as cadmium, lead, copper and zinc, and trace levels of organic pollutants such as dioxins and furans. Different thermal treatment methods can be used to either decompose or stabilize harmful elements and compounds in the ash, or separate them from the ash to get a material that can be safely stored or used as products or raw materials. In the present paper, thermal treatment methods, such as sintering, vitrification, and melting have been reviewed. In addition to a review of the scientific literature, a survey has been made of the extensive patent literature in the field. Copyright © 2015 Elsevier Ltd. All rights reserved.

In which regions is breast-feeding safer from the impact of toxic elements from the environment?

Directory of Open Access Journals (Sweden)

Nursan Cinar

2011-11-01

Full Text Available Owing to its unique nutritional and immunological characteristics, breast milk is the most important food source for infants. But, children are at greater risk for exposure to environmental toxicants from breast milk. The aim of this study was to evaluate the influence of environmental pollution on essential and toxic element contents of breast milk and determine the risky locations in our population. This study was conducted on women who were breastfeeding (n=90. Milk samples were collected at three locations in Marmara region, Turkey: highly industrialized region highly affected by pollution, urbanized region moderately and rural area that is affected little. Breast milk samples (5 mL were collected at approximately one month postpartum (mature milk. The concentrations of cadmium (Cd, cobalt (Co, chromium (Cr, copper (Cu, iron (Fe, manganese (Mn, nickel (Ni, lead (Pb and zinc (Zn in milk samples were compared to the milk samples coming from different locations. Lead, cadmium, nickel, chromium, iron and manganese levels in the breast milk are highest and engrossing especially in rural areas compared to the other regions but cobalt, copper, zinc levels are highest in highly industrial areas. The levels of essential and toxic elements in breast milk can vary in different regions. The levels presented in our study are above some countries’ data albeit not at toxic levels. Because of global effects, environmental pollution is not the problem for industrializing regions only. Rural area also may not be safe for breastfeed babies.

In which regions is breast-feeding safer from the impact of toxic elements from the environment?

Science.gov (United States)

Cinar, Nursan; Ozdemir, Sami; Yucel, Oya; Ucar, Fatma

2011-11-01

Owing to its unique nutritional and immunological characteristics, breast milk is the most important food source for infants. But, children are at greater risk for exposure to environmental toxicants from breast milk. The aim of this study was to evaluate the influence of environmental pollution on essential and toxic element contents of breast milk and determine the risky locations in our population. This study was conducted on women who were breastfeeding (n=90). Milk samples were collected at three locations in Marmara region, Turkey: highly industrialized region highly affected by pollution, urbanized region moderately and rural area that is affected little. Breast milk samples (5 mL) were collected at approximately one month postpartum (mature milk). The concentrations of cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn) in milk samples were compared to the milk samples coming from different locations.Lead, cadmium, nickel, chromium, iron and manganese levels in the breast milk are highest and engrossing especially in rural areas compared to the other regions but cobalt, copper, zinc levels are highest in highly industrial areas. The levels of essential and toxic elements in breast milk can vary in different regions. The levels presented in our study are above some countries' data albeit not at toxic levels. Because of global effects, environmental pollution is not the problem for industrializing regions only. Rural area also may not be safe for breastfeed babies.

ELEMENTAL ANALYSIS OF RESPIRABLE TIRE PARTICLES AND ASSESSMENT OF CARDIO-PULMONARY TOXICITY IN RATS

Science.gov (United States)

Elemental Analysis of Respirable Tire Particles and Assessment of Cardio-pulmonary Toxicity in RatsR.R. Gottipolu, PhD1, E. Landa, PhD2, J.K. McGee, MS1, M.C. Schladweiler, BS1, J.G. Wallenborn, MS3, A.D. Ledbetter, BS1, J.E. Richards, MS1 and U.P. Kodavanti, PhD1. 1NHEER...

Sensitivity analyses of finite element method for estimating residual stress of dissimilar metal multi-pass weldment in nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Song, Tae Kwang; Bae, Hong Yeol; Kim, Yun Jae [Korea Unviersity, Seoul (Korea, Republic of); Lee, Kyoung Soo; Park, Chi Yong [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

2008-09-15

In nuclear power plants, ferritic low alloy steel components were connected with austenitic stainless steel piping system through alloy 82/182 butt weld. There have been incidents recently where cracking has been observed in the dissimilar metal weld. Alloy 82/182 is susceptible to primary water stress corrosion cracking. Weld-induced residual stress is main factor for crack growth. Therefore exact estimation of residual stress is important for reliable operating. This paper presents residual stress computation performed by 6'' safety and relief nozzle. Based on 2 dimensional and 3 dimensional finite element analyses, effect of welding variables on residual stress variation is estimated for sensitivity analysis.

Cadmium Toxicity Affects Phytochemicals and Nutrient Elements Composition of Lettuce (Lactuca sativa L.)

OpenAIRE

Jibril, Sani Ahmad; Hassan, Siti Aishah; Ishak, Che Fauziah; Megat Wahab, Puteri Edaroyati

2017-01-01

Lettuce varieties Bombilasta BBL and Italian 167 were treated with different concentrations of cadmium (0, 3, 6, 9, and 12 mg/L) in a nutrient film technique (NFT) system to study its toxicity on phytochemicals and nutrient elements. Antioxidants analysis which employed DPPH and FRAP, flavonoids, phenolic, vitamin C, malondialdehyde (MDA), and proline indicated significant effects of Cd treatment on the varieties tested. Different concentration levels of Cd lead to positive interactions in FR...

Comparative study of essential and toxic trace elements in chewing tobacco and pan masalas by INAA and AAS

International Nuclear Information System (INIS)

Paul Choudhury, R.; Garg, A.N.; Nair, A.G.C.; Reddy, A.V.R.

2005-01-01

Concentrations of about 25 elements were measured in 10 samples of chewing tobacco and 5 of pan masalas by INAA and AAS. Reference Materials (RMs) were analysed for quality assurance and data validation. It is observed that besides many essential elements (Fe, Cu, Zn, P, Ca, Mg), several toxic elements such as As, Sb, Hg, Ni and Pb are also present in significant amounts and are likely to be swallowed along with saliva while chewing. (author)

Analysis of toxic trace elements in sea food samples by neutron activation

International Nuclear Information System (INIS)

Sarmani, S.; Majid, A.A.; Wood, A.K.; Hamzah, Z.

1993-01-01

The contents of toxic and essential trace element were analysed such as As, Hg, Se and Zn by neutron activation analysis in coastal fishes consumed by the general population of Malaysia. The mean values of the elements analysed expressed in mg/kg fresh weight ranged 1.42-5.61, 0.06-0.42, 4.2-20.6, 0.41-1.28 for As, Hg, Zn and Se, respectively. The maximum permissible limit for As in food was set at 1.0 mg/kg under the Malaysian Food Regulations. The results showed that consumption of coastal fishes is not permitted under the regulations, while the levels of Hg, Se and Zn were within the permissible limits. The daily dietary intake of As and Hg at 400 μg and 30 μg respectively are still within the tolerance levels. (author) 9 refs.; 2 tabs

Elemental Composition of Two Rice Cultivars under Potentially Toxic an Aquept and Aquent

Directory of Open Access Journals (Sweden)

Adesola Olutayo OLALEYE

2009-12-01

Full Text Available Iron toxicity is a major nutrient disorder affecting rice production of wetland rice in the irrigated and rainfed ecosystem in West Africa sub-region. Little attention has been paid to evaluating nutrient contents of rice cultivars grown on such soils and their relationship to the iron toxicity scores, grain yield and dry matter yields. A pot experiment was conducted on two potentially Fe-toxic soils (Aeric Fluvaquent and Aeric Tropaquept. The experiment was a 2 x 2 x 4 factorial experiment with three replicates in arranged in a randomized fashion. The factors were two soil types, two rice cultivars (ITA 212 and tolerant (Suakoko 8 and four Fe 2+ levels (control, 1000, 3000 and 4000 mg L-1. The result showed that for both susceptible cultivar (ITA 212 and the relatively tolerant (Suakoko 8 cultivar, little or no differences were observed in their elemental composition with regards to micro and macro-nutrients. For the susceptible cultivar, results showed that none of the tissue nutrients significantly relates to iron toxicity scores (ITS, grain yield and dry matter yield on both soil types. However, for the tolerant cultivar, ITS was observed to be significantly related to tissue K and P contents on the two soil types respectively. Tissue Ca and Mg were observed to be significantly related to the dry matter yield (DMY on Aeric Tropquept. It could be concluded that for these rice cultivars grown on two potentially Fe-toxic soils, different tissue nutrients may trigger the manifestation of bronzing or yellowing symptoms of rice cultivars.

Application of neutron activation analysis and inductively coupled plasma mass spectrometry to the determination of toxic and essential elements in Australian foods

International Nuclear Information System (INIS)

Fardy, J.J.; McOrist, G.D.; Farrar, Y.J.; Bowles, C.J.; Warner, I.M.; Tan Mingguang

1994-01-01

Current Australian Legislation specifies the maximum permitted levels of nine toxic elements in food while the National Health and Medical Research Council (NH and MRC) has listed recommended daily intake figures for seven essential elements. This investigation examined the compliance of Australian foods with both these requirements. Australia-wide samples of representative foods from the diets of Australians were used in this study after the NH and MRC kindly permitted us to join their Market Basket (Noxious Substance) Survey. Both toxic and essential element concentrations in these foods were determined using the advanced analytical techniques of instrumental (INAA) and radiochemical neutron activation analysis (RNAA) and inductively coupled plasma mass spectrometry (ICP-MS). With very few exceptions, foods do not exceed the maximum permitted levels for toxic substances. Daily intake figures for essential elements generally lie close to the maximum recommended values listed by NH and MRC. Since another source of toxic element intake is drinking water, samples from different locations were analyzed by NAA and inductively coupled plasma atomic emission spectroscopy (ICP-AES). They were extremely low in trace elements with the exception of copper, iron, zinc and lead which approached the maximum permitted concentrations. The performance of NAA and ICP-MS for analyzing biological materials were compared. NAA cannot match the superior sensitivity for a wider range of elements obtained by ICP-MS. This has been verified for a wide range of food materials. While NAA is an inconvenient and time-consuming technique for many applications, it does not suffer from blank problems after irradiation of the sample and becomes the preferred technique where low limits of detection are required for trace concentrations in solid samples. (author). 22 refs, 27 figs, 21 tabs

Residual-based a posteriori error estimation for multipoint flux mixed finite element methods

KAUST Repository

Du, Shaohong; Sun, Shuyu; Xie, Xiaoping

2015-01-01

A novel residual-type a posteriori error analysis technique is developed for multipoint flux mixed finite element methods for flow in porous media in two or three space dimensions. The derived a posteriori error estimator for the velocity and pressure error in L-norm consists of discretization and quadrature indicators, and is shown to be reliable and efficient. The main tools of analysis are a locally postprocessed approximation to the pressure solution of an auxiliary problem and a quadrature error estimate. Numerical experiments are presented to illustrate the competitive behavior of the estimator.

Residual-based a posteriori error estimation for multipoint flux mixed finite element methods

KAUST Repository

Du, Shaohong

2015-10-26

A novel residual-type a posteriori error analysis technique is developed for multipoint flux mixed finite element methods for flow in porous media in two or three space dimensions. The derived a posteriori error estimator for the velocity and pressure error in L-norm consists of discretization and quadrature indicators, and is shown to be reliable and efficient. The main tools of analysis are a locally postprocessed approximation to the pressure solution of an auxiliary problem and a quadrature error estimate. Numerical experiments are presented to illustrate the competitive behavior of the estimator.

INAA and AAS of different products from sugar cane industry in Pakistan. Toxic trace elements for nutritional safety

International Nuclear Information System (INIS)

Waheed, S.; Rahman, S.; Gill, K.P.

2009-01-01

Instrumental neutron activation analysis (INAA) have been used to determine As, Br, Hg, Sb and Se in combination with atomic absorption spectrometry (AAS) as a complementary technique for the quantification of Cd and Pb in jaggery, brown sugar, white sugar and molasses. All sugar cane products were collected from the local sugar cane industry of Pakistan. The highest concentration of these potentially toxic elements was quantified in molasses; however, molasses together with jaggery, brown sugar and white sugar contains trace amounts of all of these elements. Due to very low concentration of Cd it could only be detected in molasses. To evaluate the percentage contribution of these elements in the sugar cane products to the weekly recommended values, intakes on weekly consumption of 100 g of each item have also been calculated which follow the pattern Br>Se>Pb>Hg>As>Sb. The elevated Br contents may be attributed to the use of Br-containing chemicals for fumigation; however, these contents are well within the tolerance levels. The estimated weekly intake of all toxic elements is very low indicating that sugar cane products can be safely ingested as part of the diets. (author)

Mobilisation of toxic trace elements under various beach nourishments.

Science.gov (United States)

Pit, Iris R; Dekker, Stefan C; Kanters, Tobias J; Wassen, Martin J; Griffioen, Jasper

2017-12-01

To enhance protection and maintain wide beaches for recreation, beaches are replenished with sand: so-called beach nourishments. We compared four sites: two traditional beach nourishments, a mega beach nourishment and a reference without beach nourishment. Two sites contain calcareous-rich sand, whereas the other two sites have calcareous-poor sand. We aimed to understand hydrogeochemical processes to indicate factors critical for the mobility of trace elements at nourishments. We therefore analysed the chemical characteristics of sediment and pore water to ascertain the main drivers that mobilise toxic trace elements. With Dutch Quality Standards for soil and groundwater, the characteristics of sediment and pore water were compared to Target Values (the values at which there is a sustainable soil quality) and Intervention Values (the threshold above which the soil's functions are at risk). The pore water characteristics revealed that Target Values were regularly exceeded, especially for the nourishment sites and mainly for Mo (78%), Ni (24%), Cr (55%), and As (21%); Intervention Values for shallow groundwater were occasionally exceeded for As (2%), Cr (2%) and Zn (2%). The sediment characteristics did not exceed the Target Values and showed that trace elements were mainly present in the fine fraction of <150 μm. The oxidation of sulphide minerals such as pyrite resulted into the elevated concentration for all nourishment sites, especially when an unsaturated zone was present and influence of rainwater was apparent. To prevent trace metal mobility at a mega beach nourishment it is important to retain seawater influences and limit oxidation processes. In this respect, a shoreface nourishment is recommended rather than a mega beach nourishment with a thick unsaturated zone. Consequently, we conclude that whether a site is carbonate-rich or carbonate-poor is unimportant, as the influence of seawater will prevent decalcification, creating a low risk of mobilisation

Potentially toxic elements and rare earth elements in plants from the lake Kalimantsi bank (NE Republic of Macedonia)

International Nuclear Information System (INIS)

Vrhovnik, Petra; Doloenets, Matej

2017-01-01

Potentially toxic elements (PTE) and rare earth elements (REE) are often increased in the environment, especially nearby active or abandoned mines . While NE Macedonia is very rich with metal ore bodies also elevated pollution is expected in the surrounding ecosystems. NE part of the country is also very important agricultural area where several food crops are being produced and consequently water from local lakes and rivers is being used for irrigation. In present paper we have focused on different plant species growing on the Lake Kalimantsi bank. All plant species were analyzed for PTE and REE. Results revealed that the PTE s (Cr, Cu, Pb, Zn, Ni, As and Cd) in the studied plant species show great enhancement in all samples and also exceed the recommended and allowable limits. Meanwhile REE s reflect a very similar range among all samples. Generally, all REE s were in the safe range, according to currently known regulations. (author)

Assessment of soil and groundwater contamination by potentially toxic and trace elements in an impounded vehicle scrapyard: Case study: Ribeirão Pires, SP, Brazil

International Nuclear Information System (INIS)

Lange, Camila Neves

2018-01-01

Impounded vehicle scrapyard (IVS) overcrowding is currently a subject of concern in Brazilian scenario. The aim of this study was to assess the total levels of potentially toxic elements (PTEs) and trace elements (TE) in soil and groundwater in an IVS located in the city of Ribeirão Pires. In order to achieve this objective, topsoil, three soil cores and groundwater of three monitoring wells were analyzed. It was verified that the area is mainly affected by three factors: (1) a landfill layer with construction waste; (2) an oily residue from past industrial activities in the area; (3) vehicles parked on topsoil. For the evaluation of the results, statistical techniques, such as multivariate analysis, calculation of pollution, ecological and human health risk index were used. Mass fractions of all PTEs, except Co, Cu, Mo and Zn, were higher than reference values. Hot spots were observed for most elements suggesting vehicular source. The Geoaccumulation Index showed minimal to moderate pollution in soil for most elements, except for As and Ba, which showed higher accumulation than other elements. The enrichment factor pointed to a significant enrichment of As and Pb. Arsenic content in soil may pose a moderate to high potential ecological risk. The results of PTEs and as statistical approaches indicated that As, Ce, Co, Cu, Mn, Nb, Ni, Pb and Zn are mainly from anthropogenic sources. The content of most PTEs in topsoil does not pose a potential human health risk, except Cr content. Groundwater levels for most PTEs were below the drinking water recommendation limits, except Mn and Fe content. (author)

Advancing environmental toxicology through chemical dosimetry: External exposures versus tissue residues

Science.gov (United States)

McCarty, L.S.; Landrum, P.F.; Luoma, S.N.; Meador, J.P.; Merten, A.A.; Shephard, B.K.; van Wezelzz, A.P.

2011-01-01

The tissue residue dose concept has been used, although in a limited manner, in environmental toxicology for more than 100 y. This review outlines the history of this approach and the technical background for organic chemicals and metals. Although the toxicity of both can be explained in tissue residue terms, the relationship between external exposure concentration, body and/or tissues dose surrogates, and the effective internal dose at the sites of toxic action tends to be more complex for metals. Various issues and current limitations related to research and regulatory applications are also examined. It is clear that the tissue residue approach (TRA) should be an integral component in future efforts to enhance the generation, understanding, and utility of toxicity testing data, both in the laboratory and in the field. To accomplish these goals, several key areas need to be addressed: 1) development of a risk-based interpretive framework linking toxicology and ecology at multiple levels of biological organization and incorporating organism-based dose metrics; 2) a broadly applicable, generally accepted classification scheme for modes/mechanisms of toxic action with explicit consideration of residue information to improve both single chemical and mixture toxicity data interpretation and regulatory risk assessment; 3) toxicity testing protocols updated to ensure collection of adequate residue information, along with toxicokinetics and toxicodynamics information, based on explicitly defined toxicological models accompanied by toxicological model validation; 4) continued development of residueeffect databases is needed ensure their ongoing utility; and 5) regulatory guidance incorporating residue-based testing and interpretation approaches, essential in various jurisdictions. ??:2010 SETAC.

Reusing a residue of the oil industry (FCC) in the production of building elements

OpenAIRE

Caicedo Casso, Eduard Andrés; Universidad del Valle; Mejía de Gutiérrez, Ruby; Universidad del Valle; Gordillo Suárez, Marisol; Universidad Autónoma de Occidente; Torres Agredo, Janneth; Universidad Nacional de Colombia, sede Palmira

2015-01-01

This paper analyzes the feasibility of using a residue of spent catalyst (FCC) of the cracking process, from a Colombian oil company, in the production of building elements such as locks and pavers. To define the optimal mix of portland cement/FCC, Portland cement mortars with FCC ratios between 0 and 70% as replacement of cement were prepared and its compressive strength is evaluated at ages up to 28 days of curing. Using a statistical processing, applying the methodology of response, the pr...

Fabrication of simulated plate fuel elements: Defining role of out-of-plane residual shear stress

Energy Technology Data Exchange (ETDEWEB)

Rakesh, R., E-mail: rakesh.rad87@gmail.com [DAE Graduate Fellows, IIT Bombay, Powai, Mumbai 400076 (India); Metallic Fuels Division, BARC, Trombay, Mumbai 400085 (India); Kohli, D. [DAE Graduate Fellows, IIT Bombay, Powai, Mumbai 400076 (India); Metallic Fuels Division, BARC, Trombay, Mumbai 400085 (India); Sinha, V.P.; Prasad, G.J. [Metallic Fuels Division, BARC, Trombay, Mumbai 400085 (India); Samajdar, I. [Department of Metallurgical Engineering and Materials Science, IIT Bombay, Powai, Mumbai 400076 (India)

2014-02-01

Bond strength and microstructural developments were investigated during fabrication of simulated plate fuel elements. The study involved roll bonding of aluminum–aluminum (case A) and aluminum–aluminum + yttria (Y{sub 2}O{sub 3}) dispersion (case B). Case B approximated aluminum–uranium silicide (U{sub 3}Si{sub 2}) ‘fuel-meat’ in an actual plate fuel. Samples after different stages of fabrication, hot and cold rolling, were investigated through peel and pull tests, micro-hardness, residual stresses, electron and micro-focus X-ray diffraction. Measurements revealed a clear drop in bond strength during cold rolling: an observation unique to case B. This was related to significant increase in ‘out-of-plane’ residual shear stresses near the clad/dispersion interface, and not from visible signatures of microstructural heterogeneities.

Elemental analysis of essential and toxic content in tea and its infusion used by neutron activation

International Nuclear Information System (INIS)

Th-Rina Mulyaningsih

2011-01-01

Concentration of metal elements K, Ca, Mn, Mg, Fe, Na, Zn, Rb, Br, Cr, Cs, La,Sc and Co from 14 samples of green and black tea with aroma of jasmine, vanilla, roselle flower and tea infusion have been determined by means of neutron activation analysis. The Samples were chosen from the domestic product and were collected from Supermarket in Serpong region. Neutron irradiation of the samples was carried out in the Irradiation Facility of the RSG-GAS reactor at thermal neutron flux in the order of 1,013ncm -2 s -1 .The working procedures follow the Standard Operating Procedures of FNCA. As of the quality control the reference material of SRM-NIST 1573a Tomato leaves and NIST 1,547 Peach leaves have been applied. The analysis results show that concentration of the elements variate depending on the sort of tea.Concentration of Ca, K, Mg dan Mn have a rather high value namely >100 mg/kg. Concentration of Ca and K have values in a range of 1,135.36 - 9,123.21 and 1,064.41-2,473.12 mg/kg as well as Mg of 2,725.6 - 5,528.5; and Mn of 95.38 - 815.48 mg/kg.Concentration of Na, Fe, Co, La, Cr, Br, Sc, Cs, Rb and Zn <100 mg/kg. Most elements in these tea were released into the infusions at different percentages in a range of 27.89 - 68.94% depending on the sort of the tea. There were not detected toxic elements Hg, Cd and As except Cr with low concentration. Therefore tea drinks are adequately good enough as essential elements source and content no toxic elements. (author)

Predicting competitive adsorption behavior of major toxic anionic elements onto activated alumina: A speciation-based approach

International Nuclear Information System (INIS)

Su Tingzhi; Guan Xiaohong; Tang Yulin; Gu Guowei; Wang Jianmin

2010-01-01

Toxic anionic elements such as arsenic, selenium, and vanadium often co-exist in groundwater. These elements may impact each other when adsorption methods are used to remove them. In this study, we investigated the competitive adsorption behavior of As(V), Se(IV), and V(V) onto activated alumina under different pH and surface loading conditions. Results indicated that these anionic elements interfered with each other during adsorption. A speciation-based model was developed to quantify the competitive adsorption behavior of these elements. This model could predict the adsorption data well over the pH range of 1.5-12 for various surface loading conditions, using the same set of adsorption constants obtained from single-sorbate systems. This model has great implications in accurately predicting the field capacity of activated alumina under various local water quality conditions when multiple competitive anionic elements are present.

Objective Assessment of an Ionic Footbath (IonCleanse: Testing Its Ability to Remove Potentially Toxic Elements from the Body

Directory of Open Access Journals (Sweden)

Deborah A. Kennedy

2012-01-01

Full Text Available Ionic footbaths are often used in holistic health centres and spas to aid in detoxification; however, claims that these machines eliminate toxins from the body have not been rigorously evaluated. In this proof-of-principle study, we sought to measure the release of potentially toxic elements from ionic footbaths into distilled and tap water with and without feet. Water samples were collected and analyzed following 30-minute ionic footbath sessions without feet using both distilled (n=1 and tap water (n=6 and following four ionic footbaths using tap water (once/week for 4 weeks in six healthy participants. Urine collection samples were analyzed at four points during the study. Hair samples were analyzed for element concentrations at baseline and study conclusion. Contrary to claims made for the machine, there does not appear to be any specific induction of toxic element release through the feet when running the machine according to specifications.

Characterization, leachability and valorization through combustion of residual chars from gasification of coals with pine.

Science.gov (United States)

Galhetas, Margarida; Lopes, Helena; Freire, Márcia; Abelha, Pedro; Pinto, Filomena; Gulyurtlu, Ibrahim

2012-04-01

This paper presents the study of the combustion of char residues produced during co-gasification of coal with pine with the aim of characterizing them for their potential use for energy. These residues are generally rich in carbon with the presence of other elements, with particular concern for heavy metals and pollutant precursors, depending on the original fuel used. The evaluation of environmental toxicity of the char residues was performed through application of different leaching tests (EN12457-2, US EPA-1311 TCLP and EA NEN 7371:2004). The results showed that the residues present quite low toxicity for some of pollutants. However, depending on the fuel used, possible presence of other pollutants may bring environmental risks. The utilization of these char residues for energy was in this study evaluated, by burning them as a first step pre-treatment prior to landfilling. The thermo-gravimetric analysis and ash fusibility studies revealed an adequate thermochemical behavior, without presenting any major operational risks. Fluidized bed combustion was applied to char residues. Above 700°C, very high carbon conversion ratios were obtained and it seemed that the thermal oxidation of char residues was easier than that of the coals. It was found that the char tendency for releasing SO(2) during its oxidation was lower than for the parent coal, while for NO(X) emissions, the trend was observed to increase NO(X) formation. However, for both pollutants the same control techniques might be applied during char combustion, as for coal. Furthermore, the leachability of ashes resulting from the combustion of char residues appeared to be lower than those produced from direct coal combustion. Copyright © 2011 Elsevier Ltd. All rights reserved.

Accumulation and residue of napropamide in alfalfa (Medicago sativa) and soil involved in toxic response.

Science.gov (United States)

Cui, Li E; Yang, Hong

2011-06-15

Napropamide belongs to the amide herbicide family and widely used to control weeds in farmland. Intensive use of the herbicide has resulted in widespread contamination to ecosystems. The present study demonstrated an analysis on accumulation of the toxic pesticide napropamide in six genotypes of alfalfa (Medicago sativa), along with biological parameters and its residues in soils. Soil was treated with napropamide at 3 mg kg(-1) dry soil and alfalfa plants were cultured for 10 or 30 d, respectively. The maximum value for napropamide accumulation is 0.426 mg kg(-1) in shoots and 2.444 mg kg(-1) in roots. The napropamide-contaminated soil with alfalfa cultivation had much lower napropamide concentrations than the control (soil without alfalfa cultivation). Also, the content of napropamide residue in the rhizosphere was significantly lower than that in the non-rhizosphere soil. M. sativa exposed to 3 mg kg(-1) napropamide showed inhibited growth. Further analysis revealed that plants treated with napropamide accumulated more reactive oxygen species (O(2)(-) and H(2)O(2)) and less amounts of chlorophyll. However, not all cultivars showed oxidative injury, suggesting that the alfalfa cultivars display different tolerance to napropamide. Copyright © 2011 Elsevier B.V. All rights reserved.

Residual Stress Analysis of Severe Plastic Deformed Materials using the Finite Element Method and the Neutron Diffraction Method

International Nuclear Information System (INIS)

Kang, Mi Hyun; Seong, Back Suck; Kim, Hyoung Seop

2009-01-01

Severe plastic deformation (SPD) is one of the most promising top-down techniques, moving towards industrialization to fabricate bulk ultrafine grain materials. The strain distribution and deformation behavior during the ECAP (equal channel angular pressing), influenced by tool angles, friction and material behavior, was studied through experimental and numerical analyses. The residual stress of work piece which was straight before ECAP produces many serious problems in the next processing e.g. input of the work piece for the next ECAP. The bent work piece needs additional straightening or surface polishing even if the amount of bending is small, and residual stress need to be released before service applications. Residual stress, particularly tensile residual stress can be a very important factor in affecting the reliability and integrity of working parts. The formation of tensile residual stress may result in initiation of fatigue cracks, stress corrosion cracking, or other types of fracture. Hence, residual stress and resulting bending need to be controlled during ECAP. Thus, in current study the bending behavior and the residual stress of the work piece in ECAP are analyzed through experimental and finite element analyses by considering the effects of material, geometric, and processing parameters individually. The stress states in the ECAP processed work piece were measured by the non-destructive way using neutron diffraction. Efforts were made to suggest the alternate routes to reduce the residual stress and bending of work piece in ECAP

Authorization and Toxicity of Veterinary Drugs and Plant Protection Products: Residues of the Active Ingredients in Food and Feed and Toxicity Problems Related to Adjuvants.

Science.gov (United States)

Klátyik, Szandra; Bohus, Péter; Darvas, Béla; Székács, András

2017-01-01

Chemical substances applied in animal husbandry or veterinary medicine and in crop protection represent substantial environmental loads, and their residues occur in food and feed products. Product approval is governed differently in these two sectors in the European Union (EU), and the occurrence of veterinary drug (VD) and pesticide residues indicated by contamination notification cases in the Rapid Alert System for Food and Feed of the EU also show characteristic differences. While the initial high numbers of VD residues reported in 2002 were successfully suppressed to less than 100 cases annually by 2006 and on, the number of notification cases for pesticide residues showed a gradual increase from a low (approximately 50 cases annually) initial level until 2005 to more than 250 cases annually after 2009, with a halt occurring only in 2016. Main notifiers of VD residues include Germany, Belgium, the UK, and Italy (63, 59, 42, and 31 notifications announced, respectively), and main consigning countries of non-compliances are Vietnam, India, China, and Brazil (88, 50, 34, and 23 notifications, respectively). Thus, countries of South and Southeast Asia are considered a vulnerable point with regard to VD residues entering the EU market. Unintended side effects of VDs and plant protection products may be caused not only by the active ingredients but also by various additives in these preparations. Adjuvants (e.g., surfactants) and other co-formulants used in therapeutic agents and feed additives, as well as in pesticide formulations have long been considered as inactive ingredients in the aspects of the required main biological effect of the pharmaceutical or pesticide, and in turn, legal regulations of the approval and marketing of these additives specified significantly less stringent risk assessment requirements, than those specified for the active ingredients. However, numerous studies have shown additive, synergistic, or antagonistic side effects between the

Authorization and Toxicity of Veterinary Drugs and Plant Protection Products: Residues of the Active Ingredients in Food and Feed and Toxicity Problems Related to Adjuvants

Directory of Open Access Journals (Sweden)

Szandra Klátyik

2017-09-01

Full Text Available Chemical substances applied in animal husbandry or veterinary medicine and in crop protection represent substantial environmental loads, and their residues occur in food and feed products. Product approval is governed differently in these two sectors in the European Union (EU, and the occurrence of veterinary drug (VD and pesticide residues indicated by contamination notification cases in the Rapid Alert System for Food and Feed of the EU also show characteristic differences. While the initial high numbers of VD residues reported in 2002 were successfully suppressed to less than 100 cases annually by 2006 and on, the number of notification cases for pesticide residues showed a gradual increase from a low (approximately 50 cases annually initial level until 2005 to more than 250 cases annually after 2009, with a halt occurring only in 2016. Main notifiers of VD residues include Germany, Belgium, the UK, and Italy (63, 59, 42, and 31 notifications announced, respectively, and main consigning countries of non-compliances are Vietnam, India, China, and Brazil (88, 50, 34, and 23 notifications, respectively. Thus, countries of South and Southeast Asia are considered a vulnerable point with regard to VD residues entering the EU market. Unintended side effects of VDs and plant protection products may be caused not only by the active ingredients but also by various additives in these preparations. Adjuvants (e.g., surfactants and other co-formulants used in therapeutic agents and feed additives, as well as in pesticide formulations have long been considered as inactive ingredients in the aspects of the required main biological effect of the pharmaceutical or pesticide, and in turn, legal regulations of the approval and marketing of these additives specified significantly less stringent risk assessment requirements, than those specified for the active ingredients. However, numerous studies have shown additive, synergistic, or antagonistic side effects

Sediment and toxic contaminant transport modeling in coastal waters

International Nuclear Information System (INIS)

Onishi, Yasuo; Mayer, D.W.; Argo, R.S.

1982-01-01

Models are presented to estimate the migration of toxic contaminants in coastal waters. Ocean current is simulated by the vertically-averaged, finite element, two-demensional model known as CAFE-I with the Galerkin weighted residual technique. The refraction of locally generated waves or swells is simulated by the wave refraction model, LO3D. Using computed current, depth, and wave characteristics, the finite element model, FETRA, simulated sediment and contaminant transport in coastal waters, estuaries and rivers. Prior to the application of these models to the Irish Sea and other coastal waters, the finite element model, FETRA, was tested to demonstrate its ability to simulate sediment and contaminant interaction, and the mechanism governing the transport, deposition, and resuspension of contaminated sediment. Several simple equations such as the unsteady, advection-diffusion equation, the equation for noncohesive-sediment load due to wind-induced waves in offshore and surf zones, and the equation for sediment-radionuclide transport simulation were solved during the preliminary testing of the model. (Kato, T.)

Food plant toxicants and safety: risk assessment and regulation of inherent toxicants in plant foods.

NARCIS (Netherlands)

Essers, A.J.; Alink, G.M.; Speijers, G.J.A.; Alexander, J.; Bouwmeister, P.J.; Brandt, van den P.A.; Ciere, S.; Gry, J.; Herrman, J.; Kuiper, H.A.; Mortby, E.; Renwickn, A.G.

1998-01-01

The ADI as a tool for risk management and regulation of food additives and pesticide residues is not readily applicable to inherent food plant toxicants: The margin between actual intake and potentially toxic levels is often small; application of the default uncertainty factors used to derive ADI

Elementos tóxicos presentes em fosfatos, calcário e farinha de ossos Toxic Elements in phosphates, limestone and bone meal

Directory of Open Access Journals (Sweden)

Walter de Brito

2011-09-01

Full Text Available Objetivou-se identificar elementos tóxicos presentes nos seguintes produtos intensivamente utilizados na agropecuária brasileira: fosfato bicálcico, fosfato supertriplo, fosfato supersimples, fosfato monoamônico, fosfosulfato de amônio, polifosfato de cálcio e amônio, sal mineral bovino artesanal, farinha de ossos e calcário. Para a detecção dos elementos tóxicos utilizou-se as técnicas de difratometria de raios-x, absorção atômica de forno de grafite, colorimetria, gravimetria e ativação neutrônica. Foram detectados diversos elementos tóxicos, assim classificados conforme a agência norte americana de registro de substâncias tóxicas e doença relacionadas - ATSDR (Agency for Toxic Substances and Disease Registry como alumínio, arsênio, bário, cério, césio, cobalto, flúor, estrôncio, tório, urânio, vanádio e zinco . Também foram observadas elevadas concentrações de silício na forma de quartzo na farinha de ossos e no sal mineral bovino. O fosfato bicálcico é o produto que apresenta a menor presença de elementos tóxicos. Summary: This study aimed to identify toxic elements present in products largely used in Brazilian agriculture and livestock: dicalcium phosphate, super-triple phosphate, super-simple phosphate, monoammonium phosphate, sulphur amonium phoshphate, ammoniated calcium polyphosphate, a farm-made bovine mineral supplement, a bone meal and a limestone. Many techniques were employed in such analyses: X-ray diffractometry, atomic absorption, colorimetric and gravimetric techniques and instrumental neutron activation. It was detected many elements classified as hazard and toxic elements by the (United States ASTDR - Agency for Toxic Substances and Disease Registry such as Al, As, Ba, Ce, Cs, Co, F, Sr, Th, U, V e Zn. It has also noted a high presence of Si as quartz in the bone meal and in the bovine mineral supplement. Bicalcic phosphate presents the smallest presence of hazardous elements. Palavras

Preliminary Assessment of Health Risks of Potentially Toxic Elements in Settled Dust over Beijing Urban Area

Directory of Open Access Journals (Sweden)

Dejun Wan

2016-05-01

Full Text Available To examine levels, health risks, sources, and spatial distributions of potentially toxic elements in settled dust over Beijing urban area, 62 samples were collected mostly from residential building outdoor surfaces, and their <63 μm fractions were measured for 12 potentially toxic elements. The results show that V, Cr, Mn, Co, Ni, and Ba in dust are from predominantly natural sources, whereas Cu, Zn, As, Cd, Sb, and Pb mostly originate from anthropogenic sources. Exposure to these elements in dust has significant non-cancer risks to children but insignificant to adults. Cancer risks of Cr, Co, Ni, As, and Cd via inhalation and dermal contact are below the threshold of 10−6–10−4 but As via dust ingestion shows a tolerable risk. The non-cancer risks to children are contributed mainly (75% by As, Pb, and Sb, and dominantly (92% via dust ingestion, with relatively higher risks mainly occurring in the eastern and northeastern Beijing urban areas. Although Cd, Zn, and Cu in dust are heavily affected by anthropogenic sources, their health risks are insignificant. Source appointments suggest that coal burning emissions, the dominant source of As, are likely the largest contributors to the health risk, and traffic-related and industrial emissions are also important because they contribute most of the Pb and Sb in dust.

Effects of biochar addition on toxic element concentrations in plants

DEFF Research Database (Denmark)

Peng, Xin; Deng, Yinger; Peng, Yan

2018-01-01

Consuming food contaminated by toxic elements (TEs) could pose a substantial risk to human health. Recently, biochar has been extensively studied as an effective soil ameliorant in situ because of its ability to suppress the phytoavailability of TEs. However, despite the research interest......, the effects of biochar applications to soil on different TE concentrations in different plant parts remain unclear. Here, we synthesize 1813 individual observations data collected from 97 articles to evaluate the effects of biochar addition on TE concentrations in plant parts. We found that (1) the experiment...... type, biochar feedstock and pyrolysis temperature all significantly decreased the TE concentration in plant parts; (2) the responses of Cd and Pb concentrations in edible and indirectly edible plant parts were significantly more sensitive to the effect of biochar than the Zn, Ni, Mn, Cr, Co and Cu...

Design of specimen for weld residual stress simulation

International Nuclear Information System (INIS)

Kim, Jin Weon; Park, Jong Sun; Lee, Kyung Soo

2008-01-01

The objective of this study is to design a laboratory specimen for simulating residual stress of circumferential butt welding of pipe. Specimen type and method for residual stress generation were proposed based on the review of prior studies and parametric finite element simulation. To prove the proposed specimen type and loading method, the residual stress was generated using the designed specimen by applying proposed method and was measured. The measured residual stress using X-ray diffraction reasonably agreed with the results of finite element simulation considered in the specimen design. Comparison of residual strains measured at several locations of specimen and given by finite element simulation also showed good agreement. Therefore, it is indicated that the designed specimen can reasonably simulate the residual stress of circumferential butt welding of pipe

Residual Acute Toxicity of Some Modern Insecticides Toward Two Mirid Predators of Tomato Pests.

Science.gov (United States)

Wanumen, Andrea C; Carvalho, Geraldo A; Medina, Pilar; Viñuela, Elisa; Adán, Ángeles

2016-03-31

The successful integration of chemical and biological control strategies for crop pests depends on a thorough evaluation of the effects of pesticides on the natural enemies of pests. A case-by-case review is difficult to achieve because of the many combinations of pests, natural enemies, and crops that need to be tested. Within this framework, we tested and compared seven insecticides representative of four different modes of action (MoAs) groups on closely related predators (Miridae): flubendiamide, spirotetramat, metaflumizone, and sulfoxaflor onNesidiocoris tenuisReuter and flubendiamide, spiromesifen, indoxacarb, and imidacloprid onMacrolophus basicornis(Stal). We follow the standardized methodology of the International Organization for Biological Control, a sequential testing exposure scheme. The lethal effect of each insecticide was evaluated in adults after three days of contact with treated surfaces in the laboratory, extended laboratory, and semifield tests (inert substrate, tomato leaves, and tomato plant as the treated surface, respectively). Flubendiamide, spiromesifen, and spirotetramat were classified as harmless (class 1), metaflumizone was slightly harmful (class 2) but persistent, indoxacarb was harmless (class 1), and sulfoxaflor and imidacloprid were toxic (class 4) and exhibited a long residual activity. Our results suggest similarities in the acute toxicities of insecticides from the same MoA group on related species of natural enemies. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Application of Neutron Activation Analysis to the determination of essential and toxic elements in agroindustrial by-products employed in animal feeding

International Nuclear Information System (INIS)

Teruya, Carla Mitie

1999-01-01

In the present work the concentrations of essential elements Ca (calcium), CI (chlorine), K (potassium), Mg (magnesium), Na (sodium), Co (cobalt), Cr (chromium), Cu (copper), Fe (iron), Mn (manganese). Mo (molybdenum), Se (selenium), V (vanadium) and Zn (zinc), the toxic elements As (arsenic), Cd (cadmium) and Hg (mercury) and the elements without defined functions to the animal metabolism, such as Br (bromine), Eu (europium). La (lanthanum), Rb (rubidium), Sb (antinomies), Sc (scandium), Ta (tantalum), Th (thorium) and U (uranium) were determined in agroindustrial by-products employed in animal feeding by instrumental neutron activation analysis (INAA). Forty samples of agroindustrial by-products were analyzed, six of which are from animal origin and the others are from vegetable origin. All these materials are widely used in bovine feeding, mainly in dry season, when the forage become scarce. The precision and accuracy of the method were evaluated by means of analysis of the following certified reference materials: Rice Flour NIES-CRM-10C, Pig Kidney BCR-CRM, Oyster Tissue NIST-SRM-1566a e Buffalo River Sediment NIST-SRM-2704. The results, in general, are lower than 10 %. The results for the most of essential minerals were lower than the toxic limit for animals, and they reached the minimum requirements for domestic animals, although some agroindustrial by-products showed concentrations lower than the requirement. For all samples, the concentrations of toxic minerals were lower than the toxic limit (author)

Objective Assessment of an Ionic Foot bath (Ion Cleanse): Testing Its Ability to Remove Potentially Toxic Elements from the Body

International Nuclear Information System (INIS)

Kennedy, D.A.; Cooley, K.; Seely, D.; Kennedy, D.A.; Cooley, K.; Einarson, Th.R.; Seely, D.

2012-01-01

Ionic foot baths are often used in holistic health centres and spas to aid in detoxification; however, claims that these machines eliminate toxins from the body have not been rigorously evaluated. In this proof-of-principle study, we sought to measure the release of potentially toxic elements from ionic foot baths into distilled and tap water with and without feet. Water samples were collected and analyzed following 30-minute ionic foot bath sessions without feet using both distilled (n=1) and tap water (n=6) and following four ionic foot baths using tap water (once/week for 4 weeks) in six healthy participants. Urine collection samples were analyzed at four points during the study. Hair samples were analyzed for element concentrations at baseline and study conclusion. Contrary to claims made for the machine, there does not appear to be any specific induction of toxic element release through the feet when running the machine according to specifications

Physico-chemical characterisation of material fractions in residual and source-segregated household waste in Denmark

DEFF Research Database (Denmark)

Götze, Ramona; Pivnenko, Kostyantyn; Boldrin, Alessio

2016-01-01

differences in the physico-chemical properties of residual and source-segregated waste fractions were found for many parameters related to organic matter, but also for elements of environmental concern. Considerable differences in potentially toxic metal concentrations between the individual recyclable......Physico-chemical waste composition data are paramount for the assessment and planning of waste management systems. However, the applicability of data is limited by the regional, temporal and technical scope of waste characterisation studies. As Danish and European legislation aims for higher...... recycling rates evaluation of source-segregation and recycling chains gain importance. This paper provides a consistent up-to-date dataset for 74 physico-chemical parameters in 49 material fractions from residual and 24 material fractions from source-segregated Danish household waste. Significant...

Thorium, uranium and rare earth elements content in lanthanide concentrate (LC) and water leach purification (WLP) residue of Lynas advanced materials plant (LAMP)

Science.gov (United States)

AL-Areqi, Wadeeah M.; Majid, Amran Ab.; Sarmani, Sukiman

2014-02-01

Lynas Advanced Materials Plant (LAMP) has been licensed to produce the rare earths elements since early 2013 in Malaysia. LAMP processes lanthanide concentrate (LC) to extract rare earth elements and subsequently produce large volumes of water leach purification (WLP) residue containing naturally occurring radioactive material (NORM). This residue has been rising up the environmental issue because it was suspected to accumulate thorium with significant activity concentration and has been classified as radioactive residue. The aim of this study is to determine Th-232, U-238 and rare earth elements in lanthanide concentrate (LC) and water leach purification (WLP) residue collected from LAMP and to evaluate the potential radiological impacts of the WLP residue on the environment. Instrumental Neutron Activation Analysis and γ-spectrometry were used for determination of Th, U and rare earth elements concentrations. The results of this study found that the concentration of Th in LC was 1289.7 ± 129 ppm (5274.9 ± 527.6Bq/kg) whereas the Th and U concentrations in WLP were determined to be 1952.9±17.6 ppm (7987.4 ± 71.9 Bq/kg) and 17.2 ± 2.4 ppm respectively. The concentrations of Th and U in LC and WLP samples determined by γ- spectrometry were 1156 ppm (4728 ± 22 Bq/kg) & 18.8 ppm and 1763.2 ppm (7211.4 Bq/kg) &29.97 ppm respectively. This study showed that thorium concentrations were higher in WLP compare to LC. This study also indicate that WLP residue has high radioactivity of 232Th compared to Malaysian soil natural background (63 - 110 Bq/kg) and come under preview of Act 304 and regulations. In LC, the Ce and Nd concentrations determined by INAA were 13.2 ± 0.6% and 4.7 ± 0.1% respectively whereas the concentrations of La, Ce, Nd and Sm in WLP were 0.36 ± 0.04%, 1.6%, 0.22% and 0.06% respectively. This result showed that some amount of rare earth had not been extracted and remained in the WLP and may be considered to be reextracted.

Thorium, uranium and rare earth elements content in lanthanide concentrate (LC) and water leach purification (WLP) residue of Lynas advanced materials plant (LAMP)

International Nuclear Information System (INIS)

AL-Areqi, Wadeeah M.; Majid, Amran Ab.; Sarmani, Sukiman

2014-01-01

Lynas Advanced Materials Plant (LAMP) has been licensed to produce the rare earths elements since early 2013 in Malaysia. LAMP processes lanthanide concentrate (LC) to extract rare earth elements and subsequently produce large volumes of water leach purification (WLP) residue containing naturally occurring radioactive material (NORM). This residue has been rising up the environmental issue because it was suspected to accumulate thorium with significant activity concentration and has been classified as radioactive residue. The aim of this study is to determine Th-232, U-238 and rare earth elements in lanthanide concentrate (LC) and water leach purification (WLP) residue collected from LAMP and to evaluate the potential radiological impacts of the WLP residue on the environment. Instrumental Neutron Activation Analysis and γ-spectrometry were used for determination of Th, U and rare earth elements concentrations. The results of this study found that the concentration of Th in LC was 1289.7 ± 129 ppm (5274.9 ± 527.6Bq/kg) whereas the Th and U concentrations in WLP were determined to be 1952.9±17.6 ppm (7987.4 ± 71.9 Bq/kg) and 17.2 ± 2.4 ppm respectively. The concentrations of Th and U in LC and WLP samples determined by γ- spectrometry were 1156 ppm (4728 ± 22 Bq/kg) and 18.8 ppm and 1763.2 ppm (7211.4 Bq/kg) and 29.97 ppm respectively. This study showed that thorium concentrations were higher in WLP compare to LC. This study also indicate that WLP residue has high radioactivity of 232 Th compared to Malaysian soil natural background (63 - 110 Bq/kg) and come under preview of Act 304 and regulations. In LC, the Ce and Nd concentrations determined by INAA were 13.2 ± 0.6% and 4.7 ± 0.1% respectively whereas the concentrations of La, Ce, Nd and Sm in WLP were 0.36 ± 0.04%, 1.6%, 0.22% and 0.06% respectively. This result showed that some amount of rare earth had not been extracted and remained in the WLP and may be considered to be reextracted

Thorium, Uranium and Rare Earth Elements content in lanthanide concentrate (LC) and water leach purification (WLP) residue of Lynas Advanced Materials Plant (LAMP)

International Nuclear Information System (INIS)

Al-Areqi, W.M.; Amran Abdul Majid; Sukiman Sarmani

2013-01-01

Full-text: Lynas Advanced Materials Plant (LAMP) has been licensed to produce the rare earths elements since early 2013 in Malaysia. LAMP processes lanthanide concentrate (LC) to extract rare earth elements and subsequently produce large volumes of water leach purification (WLP) residue containing naturally occurring radioactive material (NORM). This residue has been rising up the environmental issue because it was suspected to accumulate thorium with significant activity concentration and has been classified as radioactive residue. The aim of this study is to determine Th-232, U-238 and rare earth elements in lanthanide concentrate (LC) and water leach purification (WLP) residue collected from LAMP and to evaluate the potential radiological impacts of the WLP residue on the environment. Instrumental Neutron Activation Analysis and γ-spectrometry were used for determination of Th, U and rare earth elements concentrations. The results of this study found that the concentration of Th in LC was 1289.7 ± 129 ppm (5274.9 ± 527.6 Bq/ kg) whereas the Th and U concentrations in WLP were determined to be 1952.9 ± 17.6 ppm (7987.4 ± 71.9 Bq/ kg) and 17.2 ± 2.4 ppm respectively. The concentrations of Th and U in LC and WLP samples determined by γ- spectrometry were 1156 ppm (4728 ± 22 Bq/ kg) and 18.8 ppm and 1763.2 ppm (7211.4 Bq/ kg) and 29.97 ppm respectively. This study showed that thorium concentrations were higher in WLP compare to LC. This study also indicate that WLP residue has high radioactivity of 232 Th compared to Malaysian soil natural background (63 - 110 Bq/ kg) and come under preview of Act 304 and regulations. In LC, the Ce and Nd concentrations determined by INAA were 13.2 ± 0.6 % and 4.7 ± 0.1 % respectively whereas the concentrations of La, Ce, Nd and Sm in WLP were 0.36 ± 0.04 %, 1.6 %, 0.22 % and 0.06 % respectively. This result showed that some amount of rare earth had not been extracted and remained in the WLP and may be considered to be re

Thorium, uranium and rare earth elements content in lanthanide concentrate (LC) and water leach purification (WLP) residue of Lynas advanced materials plant (LAMP)

Energy Technology Data Exchange (ETDEWEB)

AL-Areqi, Wadeeah M., E-mail: walareqi@yahoo.com; Majid, Amran Ab., E-mail: walareqi@yahoo.com; Sarmani, Sukiman, E-mail: walareqi@yahoo.com [Nuclear Science Programme, School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi (Malaysia)

2014-02-12

Lynas Advanced Materials Plant (LAMP) has been licensed to produce the rare earths elements since early 2013 in Malaysia. LAMP processes lanthanide concentrate (LC) to extract rare earth elements and subsequently produce large volumes of water leach purification (WLP) residue containing naturally occurring radioactive material (NORM). This residue has been rising up the environmental issue because it was suspected to accumulate thorium with significant activity concentration and has been classified as radioactive residue. The aim of this study is to determine Th-232, U-238 and rare earth elements in lanthanide concentrate (LC) and water leach purification (WLP) residue collected from LAMP and to evaluate the potential radiological impacts of the WLP residue on the environment. Instrumental Neutron Activation Analysis and γ-spectrometry were used for determination of Th, U and rare earth elements concentrations. The results of this study found that the concentration of Th in LC was 1289.7 ± 129 ppm (5274.9 ± 527.6Bq/kg) whereas the Th and U concentrations in WLP were determined to be 1952.9±17.6 ppm (7987.4 ± 71.9 Bq/kg) and 17.2 ± 2.4 ppm respectively. The concentrations of Th and U in LC and WLP samples determined by γ- spectrometry were 1156 ppm (4728 ± 22 Bq/kg) and 18.8 ppm and 1763.2 ppm (7211.4 Bq/kg) and 29.97 ppm respectively. This study showed that thorium concentrations were higher in WLP compare to LC. This study also indicate that WLP residue has high radioactivity of {sup 232}Th compared to Malaysian soil natural background (63 - 110 Bq/kg) and come under preview of Act 304 and regulations. In LC, the Ce and Nd concentrations determined by INAA were 13.2 ± 0.6% and 4.7 ± 0.1% respectively whereas the concentrations of La, Ce, Nd and Sm in WLP were 0.36 ± 0.04%, 1.6%, 0.22% and 0.06% respectively. This result showed that some amount of rare earth had not been extracted and remained in the WLP and may be considered to be reextracted.

Determination of trace and toxic elements in Koran rice CRM by INAA, ICP and AAS

International Nuclear Information System (INIS)

Yong Sam Chung; Young Ju Chung; Kyung Haeng Cho; Joung Hae Lee

1997-01-01

Trace and toxic elements in Certified Reference Material (CRM) made of Korean rice at the Korea Research Institute of Standards and Science have been analyzed by Instrumental Neutron Activation Analysis (INAA). Data intercomparison from the measurement with those of Atomic Absorption Spectrometry (AAS) and Induced Coupled Plasma Spectrometry (ICPS) has been studied. The powdered samples were sterilized at 1.5 x 10 6 rad in the bottles using a 60 Co source after sieving and spiking to specific elements such as As, Cd, Cr, Cu and Hg and then the homogeneity of samples was assessed. Rice flour (SRM 1568a) and standard solutions made by the National Institute of Standards Technology (NIST) were used to construct the calibration curves for the INAA and the chemical methods, respectively. The uncertainties and concentration of constituent elements were determined and the possibility of their use for analytical quality control was considered. (author)

X-Ray fluorescence determination of the mobile forms of toxic elements in meadow chernozems

International Nuclear Information System (INIS)

Belikov, K.N.; Blank, A.B.; Shevtsov, N.I.

1997-01-01

An X-ray fluorescence method for determining mobile forms of Mn, V, Cr, Co, Ni, Zn, and Pb in meadow chernozems was developed. It is based on the extraction of analytes with an acetate-ammonia buffer solution and the evaporation of the obtained filtrate with carbon powder followed by the X-ray fluorescence analysis of the dry residue. The effect of concomitants on the analytical signals of elements under determination was examined. It was suggested to spike samples with barium in order to decrease analytical errors. (author)

Toxicity of Heliotropium dolosum, Heliotropium circinatum, and Senecio vernalis in Parental Quail and Their Progeny, with Residue Evaluation of Eggs

OpenAIRE

ERÖKSÜZ, Yesari; ÇERİBAŞI, Ali Osman; ÇEVİK, Aydın; ERÖKSÜZ, Hatice

2014-01-01

In all, 160 Japanese quail (80 male and 80 female) were divided into 4 groups (3 test groups and 1 control group). The test groups were fed a diet containing aerial parts (leaves, stems, and flowers) of Senecio vernalis (SV group), Heliotropium dolosum (HD group), or Heliotropium circinatum (HC group) at the level of 30% for 6 weeks, and the control group was fed 0% in order to evaluate parental and progenial toxicity, along with the transference of alkaloid residues to their eggs. The pyrrol...

Comparative toxicities of selected rare earth elements: Sea urchin embryogenesis and fertilization damage with redox and cytogenetic effects

Energy Technology Data Exchange (ETDEWEB)

Pagano, Giovanni, E-mail: gbpagano@tin.it [“Federico II” University of Naples, Environmental Hygiene, I-80126 Naples (Italy); Guida, Marco; Siciliano, Antonietta [“Federico II” University of Naples, Environmental Hygiene, I-80126 Naples (Italy); Oral, Rahime [Ege University, Faculty of Fisheries, TR-35100 Bornova, İzmir (Turkey); Koçbaş, Fatma [Celal Bayar University, Faculty of Arts and Sciences, Department of Biology, TR-45140 Yunusemre, Manisa (Turkey); Palumbo, Anna; Castellano, Immacolata; Migliaccio, Oriana [Stazione Zoologica Anton Dohrn, Villa Comunale, 80121 Naples (Italy); Thomas, Philippe J. [Environment Canada, Science & Technology Branch, National Wildlife Research Center – Carleton University, Ottawa, Ontario, Canada K1A 0H3 (Canada); Trifuoggi, Marco [“Federico II” University of Naples, Department of Chemical Sciences, I-80126 Naples (Italy)

2016-05-15

Background: Broad-ranging adverse effects are known for rare earth elements (REE), yet only a few studies tested the toxicity of several REE, prompting studies focusing on multi-parameter REE toxicity. Methods: Trichloride salts of Y, La, Ce, Nd, Sm, Eu and Gd were tested in Paracentrotus lividus sea urchin embryos and sperm for: (1) developmental defects in either REE-exposed larvae or in the offspring of REE-exposed sperm; (2) fertilization success; (3) mitotic anomalies in REE-exposed embryos and in the offspring of REE-exposed sperm, and (4) reactive oxygen species (ROS) formation, and malondialdehyde (MDA) and nitric oxide (NO) levels. Results: REEs affected P. lividus larvae with concentration-related increase in developmental defects, 10{sup −6} to 10{sup −4} M, ranking as: Gd(III)>Y(III)>La(III)>Nd(III)≅Eu(III)>Ce(III)≅Sm(III). Nominal concentrations of REE salts were confirmed by inductively coupled plasma mass spectrometry (ICP-MS). Significant increases in MDA levels, ROS formation, and NO levels were found in REE-exposed embryos. Sperm exposure to REEs (10{sup −5} to 10{sup −4} M) resulted in concentration-related decrease in fertilization success along with increase in offspring damage. Decreased mitotic activity and increased aberration rates were detected in REE-exposed embryos and in the offspring of REE-exposed sperm. Conclusion: REE-associated toxicity affecting embryogenesis, fertilization, cytogenetic and redox endpoints showed different activities of tested REEs. Damage to early life stages, along with redox and cytogenetic anomalies should be the focus of future REE toxicity studies. - Highlights: • Seven rare earth elements exerted different effects on sea urchin early life stages. • Embryo-, spermio- and mitotoxicity, and oxidative/ nitrosative stress were found. • Nominal vs. analytical REE concentrations were checked. • Comparative toxicities were evaluated for the different REE.

Comparative toxicities of selected rare earth elements: Sea urchin embryogenesis and fertilization damage with redox and cytogenetic effects

International Nuclear Information System (INIS)

Pagano, Giovanni; Guida, Marco; Siciliano, Antonietta; Oral, Rahime; Koçbaş, Fatma; Palumbo, Anna; Castellano, Immacolata; Migliaccio, Oriana; Thomas, Philippe J.; Trifuoggi, Marco

2016-01-01

Background: Broad-ranging adverse effects are known for rare earth elements (REE), yet only a few studies tested the toxicity of several REE, prompting studies focusing on multi-parameter REE toxicity. Methods: Trichloride salts of Y, La, Ce, Nd, Sm, Eu and Gd were tested in Paracentrotus lividus sea urchin embryos and sperm for: (1) developmental defects in either REE-exposed larvae or in the offspring of REE-exposed sperm; (2) fertilization success; (3) mitotic anomalies in REE-exposed embryos and in the offspring of REE-exposed sperm, and (4) reactive oxygen species (ROS) formation, and malondialdehyde (MDA) and nitric oxide (NO) levels. Results: REEs affected P. lividus larvae with concentration-related increase in developmental defects, 10 −6 to 10 −4 M, ranking as: Gd(III)>Y(III)>La(III)>Nd(III)≅Eu(III)>Ce(III)≅Sm(III). Nominal concentrations of REE salts were confirmed by inductively coupled plasma mass spectrometry (ICP-MS). Significant increases in MDA levels, ROS formation, and NO levels were found in REE-exposed embryos. Sperm exposure to REEs (10 −5 to 10 −4 M) resulted in concentration-related decrease in fertilization success along with increase in offspring damage. Decreased mitotic activity and increased aberration rates were detected in REE-exposed embryos and in the offspring of REE-exposed sperm. Conclusion: REE-associated toxicity affecting embryogenesis, fertilization, cytogenetic and redox endpoints showed different activities of tested REEs. Damage to early life stages, along with redox and cytogenetic anomalies should be the focus of future REE toxicity studies. - Highlights: • Seven rare earth elements exerted different effects on sea urchin early life stages. • Embryo-, spermio- and mitotoxicity, and oxidative/ nitrosative stress were found. • Nominal vs. analytical REE concentrations were checked. • Comparative toxicities were evaluated for the different REE.

Finite element analysis of metallurgical phase transformations in AA 6056-T4 and their effects upon the residual stress and distortion states of a laser welded T-joint

International Nuclear Information System (INIS)

Zain-ul-abdein, Muhammad; Nelias, Daniel; Jullien, Jean-Francois; Boitout, Frederic; Dischert, Luc; Noe, Xavier

2011-01-01

Aircraft industry makes extensive use of aluminium alloy AA 6056-T4 in the fabrication of fuselage panels using laser beam welding technique. Since high temperatures are involved in the manufacturing process, the precipitation/dissolution occurrences are expected as solid state phase transformations. These transformations are likely to affect the residual distortion and stress states of the component. The present work investigates the effect of metallurgical phase transformations upon the residual stresses and distortions induced by laser beam welding in a T-joint configuration using the finite element method. Two separate models were studied using different finite element codes, where the first one describes a thermo-mechanical analysis using Abaqus; while the second one discusses a thermo-metallo-mechanical analysis using Sysweld. A comparative analysis of experimentally validated finite element models has been performed and the residual stress states with and without the metallurgical phase transformations are predicted. The results show that the inclusion of phase transformations has a negligible effect on predicted distortions, which are in agreement with the experimental data, but an effect on predicted residual stresses, although the experimentally measured residual stresses are not available to support the analyses.

Determination of macro, essential trace elements, toxic heavy metal concentrations, crude oil extracts and ash composition from Saudi Arabian fruits and vegetables having medicinal values

Directory of Open Access Journals (Sweden)

Hana R. Alzahrani

2017-11-01

Full Text Available The concentrations of essential elements (Mg, Ca, Na, K, Fe, Zn, Se, Al, Ni, and Cu and toxic heavy metals (Pb, As, Cr, Cd, and Cr from Saudi Arabian fruits and vegetables were determined by inductively coupled plasma optical emission spectrophotometry (ICP/OES. Two types of butters, Caralluma munbayana and Caralluma hesperidum, Vigna (Vigna unguiculata, common fig (Ficus carica, Annona seeds (Annonaceae seeds, Annona fruits (Annonaceae fruits, Fennel (Foeniculum vulgare, and Fennel flowers (Nigella sativa were investigated, because they are used by indigenous groups as traditional medicines with Soxhlet-extraction and dry-ashing protocol. The estimated daily dietary element intake in food samples was further calculated in order to evaluate the element dietary intake and fruit and vegetable consumption pattern of the indigenes of Saudi Arabia. The crude oil and ash compositions varied widely, but suggested that most of the foods were good sources of oils and minerals. The figures-of-merit of the ICP-OES calibration curves were excellent with good linearity (R2 > 0.9921. The use of ICP-OES in this study allowed the accurate analysis and the detection of the elements at low levels. Essential elements (K, Ca, Na, and Mg had the highest concentrations while toxic heavy metals (As, Pb, and Cd had the lowest in the foods. Essential element pairs (Mg-Na, Mg-Ca, Fe-Al were highly correlated, suggesting that these foods are sources of multiple nutrients. Toxic element pairs (Pb-Cd, Pb-As, and Cd-As, however, were poorly correlated in the foods, suggesting that these elements do not have a common source in these foods. Average consumption of these foods should provide the recommended daily allowances of essential elements, but will not expose consumers to toxic heavy metals. The ICP-OES method was validated by determining method detection limits and percent recoveries of laboratory-fortified blanks, which were generally 90–100%.

Thermal treatment of solid residues from WtE units: A review

International Nuclear Information System (INIS)

Lindberg, Daniel; Molin, Camilla; Hupa, Mikko

2015-01-01

Highlights: • We review the thermal treatment methods for ashes and residues from WtE plants. • We review the results from extensive laboratory work on vitrification, melting and vaporization of ash. • We analyze the results from the extensive patent literature on thermal treatment. • We review industrial concepts for thermal treatment of ash. - Abstract: Thermal treatment methods of bottom ash, fly ash and various types of APC (air pollution control) residues from waste-to-energy plants can be used to obtain environmentally stable material. The thermal treatment processes are meant to reduce the leachability of harmful residue constituents, destroy toxic organic compounds, reduce residue volume, and produce material suitable for utilization. Fly ash and APC residues often have high levels of soluble salts, particularly chlorides, metals such as cadmium, lead, copper and zinc, and trace levels of organic pollutants such as dioxins and furans. Different thermal treatment methods can be used to either decompose or stabilize harmful elements and compounds in the ash, or separate them from the ash to get a material that can be safely stored or used as products or raw materials. In the present paper, thermal treatment methods, such as sintering, vitrification, and melting have been reviewed. In addition to a review of the scientific literature, a survey has been made of the extensive patent literature in the field

Thermal treatment of solid residues from WtE units: A review

Energy Technology Data Exchange (ETDEWEB)

Lindberg, Daniel, E-mail: daniel.lindberg@abo.fi; Molin, Camilla, E-mail: camilla.molin@abo.fi; Hupa, Mikko, E-mail: mikko.hupa@abo.fi

2015-03-15

Highlights: • We review the thermal treatment methods for ashes and residues from WtE plants. • We review the results from extensive laboratory work on vitrification, melting and vaporization of ash. • We analyze the results from the extensive patent literature on thermal treatment. • We review industrial concepts for thermal treatment of ash. - Abstract: Thermal treatment methods of bottom ash, fly ash and various types of APC (air pollution control) residues from waste-to-energy plants can be used to obtain environmentally stable material. The thermal treatment processes are meant to reduce the leachability of harmful residue constituents, destroy toxic organic compounds, reduce residue volume, and produce material suitable for utilization. Fly ash and APC residues often have high levels of soluble salts, particularly chlorides, metals such as cadmium, lead, copper and zinc, and trace levels of organic pollutants such as dioxins and furans. Different thermal treatment methods can be used to either decompose or stabilize harmful elements and compounds in the ash, or separate them from the ash to get a material that can be safely stored or used as products or raw materials. In the present paper, thermal treatment methods, such as sintering, vitrification, and melting have been reviewed. In addition to a review of the scientific literature, a survey has been made of the extensive patent literature in the field.

The Impact of a Nickel-Copper Smelter on Concentrations of Toxic Elements in Local Wild Food from the Norwegian, Finnish, and Russian Border Regions.

Science.gov (United States)

Hansen, Martine D; Nøst, Therese H; Heimstad, Eldbjørg S; Evenset, Anita; Dudarev, Alexey A; Rautio, Arja; Myllynen, Päivi; Dushkina, Eugenia V; Jagodic, Marta; Christensen, Guttorm N; Anda, Erik E; Brustad, Magritt; Sandanger, Torkjel M

2017-06-28

Toxic elements emitted from the Pechenganickel complex on the Kola Peninsula have caused concern about potential effects on local wild food in the border regions between Norway, Finland and Russia. The aim of this study was to assess Ni, Cu, Co, As, Pb, Cd, and Hg concentrations in local wild foods from these border regions. During 2013-2014, we collected samples of different berry, mushroom, fish, and game species from sites at varying distances from the Ni-Cu smelter in all three border regions. Our results indicate that the Ni-Cu smelter is the main source of Ni, Co, and As in local wild foods, whereas the sources of Pb and Cd are more complex. We observed no consistent trends for Cu, one of the main toxic elements emitted by the Ni-Cu smelter; nor did we find any trend for Hg in wild food. Concentrations of all investigated toxic elements were highest in mushrooms, except for Hg, which was highest in fish. EU maximum levels of Pb, Cd, and Hg were exceeded in some samples, but most had levels considered safe for human consumption. No international thresholds exist for the other elements under study.

Determination of toxic and essential elements in foodstuffs from local market in Jakarta

International Nuclear Information System (INIS)

Sadjirun, S.

1994-01-01

This report presents data on toxic and essential elements such as As, Cd, Cr, Cu, Hg, Pb, Sb, Se, and Zn in rice, corn, bean, wheat, small green pea, vegetables, fruits, tea, coffee, sea foods, meat, chicken, intestines and associated organs, and eggs as consumed in Jakarta. As, Hg, Sb, Cr, Se, and Zn were determined using instrumental neutron activation analysis (INAA) after being irradiated at TRIGA MARK II reactor, while Cd, Cu, and Pb were determined using atomic absorption spectrometry (AAS). The results obtained were lower than the maximum permissible concentrations allowed. (author). 6 refs, 9 tabs

Characterization of Morus species in respect to micro, macro, and toxic elements

Directory of Open Access Journals (Sweden)

Radojković Marija M.

2014-01-01

Full Text Available This study examines the mineral composition of the extracts of the fruits, leaves and roots of white mulberry (Morus alba L. and black mulberry (Morus nigra L. grown in Serbia. All extract samples of white and black mulberry were analyzed for the content of micro (B, Co, Cr, Cu, Fe, Li, Mn, Ni, Se, Sr, Zn, macro (Ca, Mg, Na, and toxic metals (Al, As, Cd, Hg, Pb by inductively coupled plasma optical emission spectrometry (ICP-OES. The study revealed that parts of the plant had statistically significant impact on the levels of the examined elements among the two Morus species. All extracts contained high amounts of Ca, Mg, Na, B, Cu, Fe, Mn and Zn. The studies showed that in the most of extracts dominant macro element was Mg (591- 1942 μg/g of dry extract, while dominant microelements were Zn, B, Cu in all extracts, except for the black mulberry leaves, whose extract was most abundant in Fe (143 μg/g of dry extract. The highest content of micro and macro elements was detected in the extract of black mulberry leaves. This work contributes to the knowledge of the nutritional properties of Morus species. The obtained results may be useful in the evaluation of new dietary and food products.[ Projekat Ministarstva nauke Republike Srbije, br. TR 31013

Potential hazard by toxic substances in foods. Environmental protection

Energy Technology Data Exchange (ETDEWEB)

Unterhalt, B

1974-01-01

This paper reviews various toxic substances found in foods. These toxic substances include not only natural occurring toxins but also bacterial food poisons, pesticide residues, heavy metals, and food additives. The potential hazard of each toxic substance is discussed. 74 references.

Incorporation feasibility of leather residues in bricks

Energy Technology Data Exchange (ETDEWEB)

Aguiar, J.B. [Minho Univ. (Portugal). Civil Engineering Dept.; Valente, A.; Pires, M.J. [Inst. of Development and Innovation Technology of Minho, Braga (Portugal); Tavares, T. [Biological Engineering Dept., Univ. of Minho, Braga (Portugal)

2002-07-01

The footwear industry has strips of leather as one of its by-products. These leather residues, due to their high chromium content, can be regarded as a threat to the environment, particularly if no care is taken with their disposal. With the incorporation of the residues in ceramic products, after trituration, is possible to neutralise the eventual toxicity of chromium. In a laboratory study we produced prismatic bricks using clay from the region and incorporating 1, 3 and 5% (by mass) of leather residues. This corresponds at about 20, 60 and 100% (by apparent volume). The moulds were filled up with paste and, in order to have some compactness, the ceramic paste was compressed with a spatula. After that, it began the process of drying and burning the bricks. They were tested to flexure, compression and leaching. The results showed that the toxicity of chromium disappeared in the bricks. The mechanical tests showed a decrease in strength for the specimens with leather residue. The compressive strength decreases about 22% for 1% of incorporation of leather residue. However, as bricks were lighter and more porous, we can expect that they are better for thermal isolation. (orig.)

Clinical Aspects of Trace Elements: Zinc in Human Nutrition – Zinc Deficiency and Toxicity

Directory of Open Access Journals (Sweden)

Michelle M Pluhator

1996-01-01

Full Text Available Available evidence suggests that trace elements, such as zinc, once thought to have no nutritional relevance, are possibly deficient in large sections of the human population. Conditioned deficiencies have been reported to result from malabsorption syndromes, acrodermatitis enteropathica, alcoholism, gastrointestinal disease, thermal injury, chronic diseases (eg, diabetes, sickle cell anemia, and in total parenteral nutrition therapy. Awareness that patients with these problems are at risk has led health professionals to focus increasingly on the importance of zinc therapy in the prevention and treatment of deficiency. More recently zinc toxicity and its role in human nutrition and well-being have come under investigation. Reports have focused on the role of zinc toxicity in causes of copper deficiency, changes in the immune system and alterations in blood lipids. As the numerous challenges presented by the study of zinc in human nutrition are met, more appropriate recommendations for dietary and therapeutic zinc intake are being made.

Potential enzyme toxicity of oxytetracycline to catalase

Energy Technology Data Exchange (ETDEWEB)

Zhenxing, Chi; Rutao, Liu; Zhang Hao, E-mail: Trutaoliu@sdu.edu.cn [School of Environmental Science and Engineering, Shandong University, China-America CRC for Environment and Health, Shandong Province, 27 Shanda South Road, Jinan 250100 (China)

2010-10-15

Oxytetracycline (OTC) is a kind of widely used veterinary drugs. The residue of OTC in the environment is potentially harmful. In the present work, the non-covalent toxic interaction of OTC with catalase was investigated by the fluorescence spectroscopy, UV-vis absorption and circular dichroism (CD) spectroscopy at physiological pH 7.4. OTC can interact with catalase to form a complex mainly by van der Waals' interactions and hydrogen bonds with one binding site. The association constants K were determined to be K{sub 293K} = 7.09 x 10{sup 4} L mol{sup -1} and K{sub 311K} = 3.31 x 10{sup 4} L mol{sup -1}. The thermodynamic parameters ({Delta}H{sup o}, {Delta}G{sup o} and {Delta}S{sup o}) of the interaction were calculated. Based on the Foerster theory of non-radiative energy transfer, the distance between bound OTC and the tryptophan residues of catalase was determined to be 6.48 nm. The binding of OTC can result in change of the micro-environment of the tryptophan residues and the secondary structure of catalase. The activity of catalase was also inhibited for the bound OTC. This work establishes a new strategy to probe the enzyme toxicity of veterinary drug residues and is helpful for clarifying the molecular toxic mechanism of OTC in vivo. The established strategy can be used to investigate the potential enzyme toxicity of other small organic pollutants and drugs.

Potential enzyme toxicity of oxytetracycline to catalase

International Nuclear Information System (INIS)

Chi Zhenxing; Liu Rutao; Zhang Hao

2010-01-01

Oxytetracycline (OTC) is a kind of widely used veterinary drugs. The residue of OTC in the environment is potentially harmful. In the present work, the non-covalent toxic interaction of OTC with catalase was investigated by the fluorescence spectroscopy, UV-vis absorption and circular dichroism (CD) spectroscopy at physiological pH 7.4. OTC can interact with catalase to form a complex mainly by van der Waals' interactions and hydrogen bonds with one binding site. The association constants K were determined to be K 293K = 7.09 x 10 4 L mol -1 and K 311K = 3.31 x 10 4 L mol -1 . The thermodynamic parameters (ΔH o , ΔG o and ΔS o ) of the interaction were calculated. Based on the Foerster theory of non-radiative energy transfer, the distance between bound OTC and the tryptophan residues of catalase was determined to be 6.48 nm. The binding of OTC can result in change of the micro-environment of the tryptophan residues and the secondary structure of catalase. The activity of catalase was also inhibited for the bound OTC. This work establishes a new strategy to probe the enzyme toxicity of veterinary drug residues and is helpful for clarifying the molecular toxic mechanism of OTC in vivo. The established strategy can be used to investigate the potential enzyme toxicity of other small organic pollutants and drugs.

Use of human milk in the assessment of toxic metal exposure and essential element status in breastfeeding women and their infants in coastal Croatia.

Science.gov (United States)

Grzunov Letinić, Judita; Matek Sarić, Marijana; Piasek, Martina; Jurasović, Jasna; Varnai, Veda Marija; Sulimanec Grgec, Antonija; Orct, Tatjana

2016-12-01

Pregnant and lactating women and infants are vulnerable population groups for adverse effects of toxic metals due to their high nutritional needs and the resultant increased gastrointestinal absorption of both, essential and toxic elements. Although breastfeeding is recommended for infants worldwide, as human milk is the best source of nutrients and other required bioactive factors, it is also a pathway of maternal excretion of toxic substances including toxic metals and thus a source of infant exposure. The aim of this research was to assess health risks in breastfeeding women in the coastal area of the Republic of Croatia and their infants (N=107) due to maternal exposure to Cd and Pb via cigarette smoking, and Hg via seafood and dental amalgam fillings, and their interaction with essential elements. Biological markers of exposure were the concentrations of main toxic metals Pb, Cd and Hg in maternal blood and three types of breast milk throughout lactation stages. Biological markers of effects were the levels of essential elements Ca, Fe, Cu, Zn and Se in maternal serum and breast milk. With regard to cigarette smoking as a source of exposure to Cd and Pb, there were effects of smoking on Cd concentration in blood and correlations between the smoking index and Cd concentrations in maternal blood (ρ=0.593; Pexposure in both breastfeeding women and their infants. Copyright © 2016 Elsevier GmbH. All rights reserved.

Residual stress by repair welds

International Nuclear Information System (INIS)

Mochizuki, Masahito; Toyoda, Masao

2003-01-01

Residual stress by repair welds is computed using the thermal elastic-plastic analysis with phase-transformation effect. Coupling phenomena of temperature, microstructure, and stress-strain fields are simulated in the finite-element analysis. Weld bond of a plate butt-welded joint is gouged and then deposited by weld metal in repair process. Heat source is synchronously moved with the deposition of the finite-element as the weld deposition. Microstructure is considered by using CCT diagram and the transformation behavior in the repair weld is also simulated. The effects of initial stress, heat input, and weld length on residual stress distribution are studied from the organic results of numerical analysis. Initial residual stress before repair weld has no influence on the residual stress after repair treatment near weld metal, because the initial stress near weld metal releases due to high temperature of repair weld and then stress by repair weld regenerates. Heat input has an effect for residual stress distribution, for not its magnitude but distribution zone. Weld length should be considered reducing the magnitude of residual stress in the edge of weld bead; short bead induces high tensile residual stress. (author)

Analysis of the Toxic Element Concentrations in the Mesozoic Siliceous Rocks in Terms of the Raw Material Importance

Science.gov (United States)

Pękala, Agnieszka

2017-10-01

As part of an integrated system of environmental protection at every stage of the product life cycle such as: raw material extraction, its transportation and processing as well the subsequent use and development is required to carry out actions towards reducing or completely eliminating products that contain harmful substances to the environment. The purpose of the presented paper is an analysis of the toxic element concentrations in the extracted siliceous minerals at the initial stage of the raw material recognition. The research material is constituted by rocks collected from the Mesozoic bedrock from the Bełchatów lignite deposit. A group of the studied rocks is represented by diatomites, gaizes, opoka-rocks and light opoka-rocks, enriched with minerals from the group of SiO2. Most of the recognized petrographic sediments have a real possibility of potential applications in the building material industry, but it needs to carry out a detailed and thorough research. The studies of the chemical composition were determined by atomic absorption spectroscopy (AAS) using Philips PU 9100Xi Camera SX-100 spectrometer and an atomic emission spectroscopy with inductively coupled plasma (ICP AES) using PLASMA 40 spectrometer. There were carried out a chemical analyses and determined the content of some toxic elements: Pb, Cr, Cd, Ni, Zn, Cu, Co, As, Sr, Ba, Zr. in the studied sedimentary rocks. The analysis of the results draws attention to the high content of cadmium in the case of the studied sediments. The concentration of this element in the described rocks is an average of 0.22 mg/kg -the diatomites, 0.05 mg/kg -the gaizes, 0.4 mg/kg -the opoka-rocks, 2.23 mg/kg -the light opoka-rocks. It was moreover registered varied concentration of arsenic in diatomites, that is formed in the range of 0.05 - 9.6 mg/kg, an average of 6.3 mg/kg. The content of the other designated elements with toxic properties in the analysed groups of rocks does not exceed the limit values. An

Comparative study of the nutritional composition and toxic elements of farmed and wild Chanodichthys mongolicus

Science.gov (United States)

Jiang, Haifeng; Cheng, Xiaofei; Geng, Longwu; Tang, Shizhan; Tong, Guangxiang; Xu, Wei

2017-07-01

Information of the difference in quality between farmed and wild fish is central to better ensuring fish products produced in aquaculture meet regulatory and consumer requirements. Proximate composition, amino acid and fatty acid profiles, and toxic elements contents of farmed and wild Chanodichthys mongolicus were established and compared. Significantly higher crude protein content while lower moisture content in farmed fish compared to wild fish were observed ( Pacids (TAA), total essential amino acids (TEAA), total non-essential amino acids (TNEAA) and total delicious amino acids (TDAA) in farmed fish were all significantly higher than those in the wild equivalent ( Pacid profiles in both farmed and wild C. mongolicus were dominated by monounsaturated fatty acid (MUFA), with farmed fish contained much more MUFA content compared to wild counterpart ( Pacid (PUFA) including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) than farmed fish ( Pacid (C18:2n6) were the predominant PUFA in wild and farmed C. mongolicus, respectively. Moreover, farmed fish displayed an overall lower toxic element levels (As, Cd, Pb and Hg) in comparison with wild fish, and both were far lower than the established limit standard. In conclusion, our results suggest that the nutritional quality of farmed C. mongolicus was inferior to their wild counterpart with respect to fatty acids nutrition, and therefore further studies should focus on the improving C. mongolicus diet in order to enhance the overall nutritional composition.

Determination of the Mineral Composition and Toxic Element Contents of Propolis by Near Infrared Spectroscopy

Directory of Open Access Journals (Sweden)

M. Inmaculada González-Martín

2015-11-01

Full Text Available The potential of near infrared spectroscopy (NIR with remote reflectance fiber-optic probes for determining the mineral composition of propolis was evaluated. This technology allows direct measurements without prior sample treatment. Ninety one samples of propolis were collected in Chile (Bio-Bio region and Spain (Castilla-León and Galicia regions. The minerals measured were aluminum, calcium, iron, potassium, magnesium, phosphorus, and some potentially toxic trace elements such as zinc, chromium, nickel, copper and lead. The modified partial least squares (MPLS regression method was used to develop the NIR calibration model. The determination coefficient (R2 and root mean square error of prediction (RMSEP obtained for aluminum (0.79, 53, calcium (0.83, 94, iron (0.69, 134 potassium (0.95, 117, magnesium (0.70, 99, phosphorus (0.94, 24 zinc (0.87, 10 chromium (0.48, 0.6 nickel (0.52, 0.7 copper (0.64, 0.9 and lead (0.70, 2 in ppm. The results demonstrated that the capacity for prediction can be considered good for wide ranges of potassium, phosphorus and zinc concentrations, and acceptable for aluminum, calcium, magnesium, iron and lead. This indicated that the NIR method is comparable to chemical methods. The method is of interest in the rapid prediction of potentially toxic elements in propolis before consumption.

Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity

International Nuclear Information System (INIS)

Frija, M.; Hassine, T.; Fathallah, R.; Bouraoui, C.; Dogui, A.

2006-01-01

This paper presents a numerical simulation of the shot peening process using finite element method. The majority of the controlling parameters of the process have been taken into account. The shot peening loading has been characterised by using energy equivalence between the dynamic impact and a static indentation of a peening shot in the treated surface. The behaviour of the subjected material is supposed to be elastic plastic with damage. An integrated law of the damage proposed by Lemaitre and Chaboche has been used. The proposed model leads to obtain the residual stress, the plastic deformation profiles and the surface damage. An application on a shot peened Ni-based super alloy Waspaloy has been carried out. The comparison of the residual stresses, obtained by X-ray diffraction method and by finite element calculation, shows a good correlation. The in-depth profile of the plastic deformations and the superficial damage values are in good agreement with the experimental observations

Assessment of the Lake Gendabi salt for trace elements and toxic heavy metals by energy dispersive X-ray fluorescence spectrometry

International Nuclear Information System (INIS)

Lugendo, I.; Mohammed, N.K.; Spyrou, N.M.

2013-01-01

This study has analyzed samples of salts from Lake Gendabi, located in the northern part of Tanzania for metal contamination using the EDXRF spectrometry. The aim of the study was to assess the suitability of the salt from Lake Gendabi for human consumption. Seventy-five samples of salt were collected from the Lake Gendabi floor and grouped into five grades (G1, G2, G3, G4 and G5) depending on the position of the salt from the lake shore. In addition to Na and Cl, concentrations of 17 more elements were determined in all five grades of salt. These included seven toxic metals which are Al, Ni, Cr, Cd, Pb as well as Th and U which are both toxic and radioactive. The concentrations of all toxic elements found in the samples were higher than their Maximum tolerable limits set by international organizations. As this salt is used in many parts of Tanzania, it is proposed that the salt should be thoroughly purified before entering the market. Further research to include salt samples from other salt production areas in Tanzania is recommended. (author)

Study of radon concentration and toxic elements in drinking and irrigated water and its implications in Sungai Petani, Kedah, Malaysia

Directory of Open Access Journals (Sweden)

Nisar Ahmad

2015-07-01

Full Text Available The radon activity concentration and toxic elements have been assessed in drinking and irrigated water samples collected from different locations of Sungai Petani, Kedah, Malaysia. The water samples were collected from wells, streams and taps. A calibrated alpha spectrometer RAD-7 (Model 2890 and Atomic Absorption Spectrometers (Perkin–Elmer, Model AAnalyst 200, Shimadzu, Model AA-700 were used to estimate radon activity concentration and toxic elements, respectively. Maximum average value of radon concentration among the various types of water sources was found 14.7 ± 1.44 Bq/l in well water used for drinking and irrigation and minimum was found 5.37 ± 0.58 Bq/l in tap water used for drinking. Contribution of radon in drinking water to indoor air and age dependent associated annual effective doses were calculated from the measured radon concentration and were found less than lower limit of recommended action level. The activity concentrations of Ni > Pb > Cd > As > Cr were found higher for streams water as compared to wells and tap water. Values of radon concentration in well water were found higher than EPA recommended level and lower than WHO action level while the annual effective doses and level of toxic elements in water reported in this study were found lower than recommended level.

Rice is a potential dietary source of not only arsenic but also other toxic elements like lead and chromium

Directory of Open Access Journals (Sweden)

Amjad M. Shraim

2017-05-01

Full Text Available Rice is a staple food and a good source of nutrition for half of the earth’s population including Middle Eastern countries. However, rice may accumulate hazardous levels of toxic elements. In KSA, rice is imported from many countries; some of which suffer from arsenic contamination in their groundwater and soil. Despite the large daily consumption of rice in KSA, no investigations on the contamination of rice sold there are published so far. Additionally, reports on the contamination of rice with other toxic elements are rare in the literature. To investigate this issue, a total of 84 rice samples were collected from local markets in Almadinah Almunawarah, KSA (n = 70 and Brisbane, Australia (n = 12 and analyzed for arsenic and other elements by ICP-MS. The mean concentrations (mg kg−1 for the KSA samples with concentrations >LOQ were 0.136 for As (range 0.026–0.464, n = 70; Cd: 0.017 (0.003–0.046, n = 64; Pb: 0.029 (0.003–0.218, n = 40; Ni: 0.064 (0.042–0.086, n = 5; Mg: 157 (51.8–777, n = 70; Mn: 4.28 (0.960–10.9, n = 70; Fe: 7.07 (1.9–55.1, n = 70; Zn: 6.19 (1.15–13.5, n = 70; Cu 1.28 (0.508–2.41, n = 70; Se 0.202 (0.007–0.574, n = 70; Cr: 0.057 (0.010–0.184, n = 19; and Co: 0.012 (0.001–0.116, n = 56. Several samples were found to contain at least one element in excess of the Chinese MCL (0.2 mg kg−1for Cd, Cr, Pb, and iAs each. A large variation in element concentration was observed for samples of different origins. In comparison, the American rice accumulated the highest arsenic concentration (mean 0.257 mg kg−1 followed by the Thai rice (mean 0.200 mg kg−1, the Pakistani rice (mean 0.147 mg kg−1, the Indian rice (mean 0.103 mg kg−1, and finally the Egyptian rice (mean 0.097 mg kg−1. Additionally, 3 individual samples from Surinam, Australia, and France contained arsenic concentrations (mg kg−1 of 0.290, 0.188, and 0.183. The findings of this investigation

Concentrations and geographical variations of selected toxic elements in meat from semi-domesticated reindeer (Rangifer tarandus tarandus L.) in mid- and northern Norway: evaluation of risk assessment.

Science.gov (United States)

Hassan, Ammar Ali; Brustad, Magritt; Sandanger, Torkjel M

2012-05-01

Meat samples (n = 100) from semi-domesticated reindeer (Rangifer tarandus tarandus L.) were randomly collected from 10 grazing districts distributed over four Norwegian counties in 2008 and 2009. The main aim was to study concentrations and geographical variations in selected toxic elements; cadmium (Cd), lead (Pb), arsenic (As), copper (Cu), nickel (Ni) and vanadium (V) in order to assess the risk associated with reindeer meat consumption. Sample solutions were analysed using an inductively coupled plasma high resolution mass spectrometer (ICP-HRMS), whereas analysis of variance (ANOVA) was used for statistical analyses. Geographical variations in element concentrations were revealed, with As and Cd demonstrating the largest geographical differences. No clear geographical gradient was observed except for the east-west downward gradient for As. The As concentrations were highest in the vicinity of the Russian border, and only Cd was shown to increase with age (p < 0.05). Sex had no significant effect on the concentration of the studied elements. The concentrations of all the studied elements in reindeer meat were generally low and considerably below the maximum levels (ML) available for toxic elements set by the European Commission (EC). Thus, reindeer meat is not likely to be a significant contributor to the human body burden of toxic elements.

Chemical and sewage sludge co-incineration in a full-scale MSW incinerator: toxic trace element mass balance.

Science.gov (United States)

Biganzoli, Laura; Grosso, Mario; Giugliano, Michele; Campolunghi, Manuel

2012-10-01

Co-incineration of sludges with MSW is a quite common practice in Europe. This paper illustrates a case of co-incineration of both sewage sludges and chemical sludges, the latter obtained from drinking water production, in a waste-to-energy (WTE) plant located in northern Italy and equipped with a grate furnace, and compares the toxic trace elements mass balance with and without the co-incineration of sludges. The results show that co-incineration of sewage and chemical sludges does not result in an increase of toxic trace elements the total release in environment, with the exception of arsenic, whose total release increases from 1 mg t(fuel) (-1) during standard operation to 3 mg t(fuel) (-1) when sludges are co-incinerated. The increase of arsenic release is, however, attributable to the sole bottom ashes, where its concentration is five times higher during sludge co-incineration. No variation is observed for arsenic release at the stack. This fact is a further guarantee that the co-incineration of sludges, when performed in a state-of-the-art WTE plant, does not have negative effects on the atmospheric environment.

Contents evaluation of some essential and toxic elements in children and elders diet by neutron activation analysis

International Nuclear Information System (INIS)

Maihara, Vera Akiko

1996-01-01

Essential and toxic elements in the 19 diet samples from pre-school children and 23 diet samples from elderly people, have been determined by neutron activation analysis. The diet samples were collected by duplicate portion method. A radiochemical separation procedure was developed and applied for determining Cd, Co, Cr, Fe, Mo, Sb, U, Th, W and Zn, based on retention of these elements in a Chelex-100 resin. In the case of As and Se, the procedure was based on retention in inorganic exchanger TDO (tin dioxide). The contents of proteins, lipids and carbohydrates were also analysed. The results have been presented and discussed

Eco-Friendly Multipurpose Lubricating Greases from Vegetable Residual Oils

Directory of Open Access Journals (Sweden)

Ponnekanti Nagendramma

2015-10-01

Full Text Available Environmentally friendly multipurpose grease formulation has been synthesized by using Jatropha vegetable residual oil with lithium soap and multifunctional additive. The thus obtained formulation was evaluated for its tribological performance on a four-ball tribo-tester. The anti-friction and anti-wear performance characteristics were evaluated using standard test methods. The biodegradability and toxicity of the base oil was assessed. The results indicate that the synthesized residual oil grease formulation shows superior tribological performance when compared to the commercial grease. On the basis of physico-chemical characterization and tribological performance the vegetable residual oil was found to have good potential for use as biodegradable multipurpose lubricating grease. In addition, the base oils are biodegradable and non toxic.

Residual stresses

International Nuclear Information System (INIS)

Macherauch, E.

1978-01-01

Residual stresses are stresses which exist in a material without the influence of external powers and moments. They come into existence when the volume of a material constantly changes its form as a consequence of mechanical, thermal, and/or chemical processes and is hindered by neighbouring volumes. Bodies with residual stress are in mechanical balance. These residual stresses can be manifested by means of all mechanical interventions disturbing this balance. Acoustical, optical, radiological, and magnetical methods involving material changes caused by residual stress can also serve for determining residual stress. Residual stresses have an ambivalent character. In technical practice, they are feared and liked at the same time. They cause trouble because they can be the cause for unexpected behaviour of construction elements. They are feared since they can cause failure, in the worst case with catastrophical consequences. They are appreciated, on the other hand, because, in many cases, they can contribute to improvements of the material behaviour under certain circumstances. But they are especially liked for their giving convenient and (this is most important) mostly uncontrollable explanations. For only in very few cases we have enough knowledge and possibilities for the objective evaluation of residual stresses. (orig.) [de

Studies by nuclear and physico-chemical methods of tissue's metallic contamination located around biomaterials. Toxicity measurements of several biomaterials residual radioactivity

International Nuclear Information System (INIS)

Guibert, Geoffroy

2004-01-01

Implants used as biomaterials fulfill conditions of functionality, compatibility and occasionally bio-activity. There are four main families of biomaterials: metals and metal alloys, polymers, bio-ceramics and natural materials. Because of corrosion and friction in the human body, implants generate debris. These debris develop different problems: toxicity, inflammatory reactions, prosthetic unsealing by osseous dissolution. Nature, size, morphology and amount of debris are the parameters which have an influence on tissue response. We characterize metallic contamination coming from knee prosthesis into surrounding capsular tissue by depth migration, in vivo behaviours, content, size and nature of debris. The PIXE-RBS and STEM-EDXS methods, that we used, are complementary, especially about characterization scale. Debris contamination distributed in the whole articulation is very heterogeneous. Debris migrate on several thousands μm in tissue. Solid metallic particles, μm, are found in the most polluted samples, for both kinds of alloys TA6V and CrCoMo. In the mean volume analysed by PIXE, the in vivo mass ratios [Ti]/[V] and [Co]/[Cr] confirm the chemical stability of TA6V debris and chemical evolution of CrCoMo debris. Complementary measures of TA6V grains, on a nano-metric scale by STEM-EDXS, show a dissolution of coarse grain (μm) in smaller grains (nm). Locally, TA6V grains of a phase are detected and could indicate a preferential dissolution of β phase (grain boundaries) with dropping of Al and V, both toxic and carcinogenic elements. A thin target protocol development correlates PIXE and histological analysis on the same zone. This protocol allows to locate other pathologies in relationship with weaker metal contamination, μg/g, thanks to the great sensitivity of PIXE method. Harmlessness with respect to the residual radioactivity of several natural or synthetic biomaterials is established, using ultra low background noise γ detection system. (author)

Monitoring of Some Pesticides Residue in Consumed tea in Tehran Market

Directory of Open Access Journals (Sweden)

Maryam Amirahmadi

2013-01-01

Full Text Available Tea is an agricultural product of the leaves, leaf buds, and internodes of various cultivars and sub-varieties of the Camellia sinensis plant, processed and vulcanized using various methods. Tea is a main beverage in Iranian food basket so should be free from toxic elements such as pesticides residue. There is no data bank on the residue of pesticides in the consumed black tea in Iran. The present study is the first attempt for monitoring of 25 pesticide residues from different chemical groups in tea samples obtained from local markets in Tehran, I.R. Iran during the period 2011. A reliable and accurate method based on spiked calibration curve and QuEChERS sample preparation was developed for determination of pesticide residues in tea by gas chromatography--mass spectrometry (GC/MS. The using of spiked calibration standards for constructing the calibration curve substantially reduced adverse matrix-related effects and negative recovery affected by GCB on pesticides. The recovery of pesticides at 3 concentration levels (n = 3 was in range of 81.4 - 99.4%. The method was proved to be repeatable with RSDr lower than 20%. The limits of quantification for all pesticides were <=20 ng/g. 53 samples from 17 imported and manufactured brand were analyzed. Detectable pesticides residues were found in 28.3% (15 samples of the samples. All of the positive samples were contaminated with unregulated pesticides (Endosulfan Sulfate or Bifenthrin which are established by ISIRI. None of the samples had contamination higher than maximum residue limit set by EU and India.

Monitoring of some pesticides residue in consumed tea in Tehran market

Directory of Open Access Journals (Sweden)

Hamedani Morteza Pirali

2013-01-01

Full Text Available Abstract Tea is an agricultural product of the leaves, leaf buds, and internodes of various cultivars and sub-varieties of the Camellia sinensis plant, processed and vulcanized using various methods. Tea is a main beverage in Iranian food basket so should be free from toxic elements such as pesticides residue. There is no data bank on the residue of pesticides in the consumed black tea in Iran. The present study is the first attempt for monitoring of 25 pesticide residues from different chemical groups in tea samples obtained from local markets in Tehran, I.R. Iran during the period 2011. A reliable and accurate method based on spiked calibration curve and QuEChERS sample preparation was developed for determination of pesticide residues in tea by gas chromatography–mass spectrometry (GC/MS. The using of spiked calibration standards for constructing the calibration curve substantially reduced adverse matrix-related effects and negative recovery affected by GCB on pesticides. The recovery of pesticides at 3 concentration levels (n = 3 was in range of 81.4 - 99.4%. The method was proved to be repeatable with RSDr lower than 20%. The limits of quantification for all pesticides were ≤20 ng/g. 53 samples from 17 imported and manufactured brand were analyzed. Detectable pesticides residues were found in 28.3% (15 samples of the samples. All of the positive samples were contaminated with unregulated pesticides (Endosulfan Sulfate or Bifenthrin which are established by ISIRI. None of the samples had contamination higher than maximum residue limit set by EU and India.

Combinatorial construction of toric residues

OpenAIRE

Khetan, Amit; Soprounov, Ivan

2004-01-01

The toric residue is a map depending on n+1 semi-ample divisors on a complete toric variety of dimension n. It appears in a variety of contexts such as sparse polynomial systems, mirror symmetry, and GKZ hypergeometric functions. In this paper we investigate the problem of finding an explicit element whose toric residue is equal to one. Such an element is shown to exist if and only if the associated polytopes are essential. We reduce the problem to finding a collection of partitions of the la...

Monitoring residue in animals and primary products of animal origin

Directory of Open Access Journals (Sweden)

Janković Saša

2008-01-01

Full Text Available The objective of control and systematic monitoring of residue is to secure, by the examination of a corresponding number of samples, the efficient monitoring of the residue level in tissues and organs of animals, as well as in primary products of animal origin. This creates possibilities for the timely taking of measures toward the securing of food hygiene of animal origin and the protection of public health. Residue can be a consequence of the inadequate use of medicines in veterinary medicine and pesticides in agriculture and veterinary medicine, as well as the polluting of the environment with toxic elements, dioxins, polychlorinated biphenyls, and others. Residue is being monitored in Serbia since 1972, and in 2004, national monitoring was brought to the level of EU countries through significant investments by the Ministry of Agriculture, Forestry and Water Management. This is also evident in the EU directives which permit exports of all kinds of meat and primary products of animal origin, covered by the Residue Monitoring Program. The program of systematic examinations of residue has been coordinated with the requirements of the European Union, both according to the type of examined substance, as well as according to the number of samples and the applied analytical techniques. In addition to the development of methods and the including of new harmful substances into the monitoring programme, it is also necessary to coordinate the national regulations that define the maximum permitted quantities of certain medicines and contaminants with the EU regulations, in order to protect the health of consumers as efficiently as possible, and for the country to take equal part in international trade.

radiochemical studies on the binding of humic materials with toxic elements and compounds

International Nuclear Information System (INIS)

Afifi, D.M.I.

2001-01-01

industrial nations produce several billion tons of waste every year . this figure will increase as both population and industrial growth increase. there are many kinds of waste, including refinery waste, which consists of hydrocarbons, heavy metals, metal catalysts and caustic solution; dredge spoils, some of which are highly polluted and cntains substances potentially hazardous to human health or the marine ecosystem; chemical waste such as insecticides, pesticides, other complex chemicals and heavy metals; radioactive waste and agricultural waste, anmd most of them are extremely hazardous and harmful to the marine ecosystem and its inhabitants.the aim of this thesis is to study the binding of humic materials with toxic elements and compounds

Determination of selected toxic elements in leaves of White Hawthorn grown in a remote area

Directory of Open Access Journals (Sweden)

Zeiner M.

2013-04-01

Full Text Available One important plant of the Rosaceae family which is commonly used as phytopharmaceutical in Europe and North America is Hawthorn (Crataegus monogyna. The fruits, the leaves together with their extracts are applied in patients suffering mild cardiac disorders or nervosity. Since the leaves as well as the berries act as diuretics a sufficient micronutrient supply has to be guaranteed. On the other the quantities of toxic elements present in the plant parts should be at levels without harmful effects on human health. For this purpose Hawthorn leaves and flowers were collected in a remote area in 2011 and 2012 and analysed for their elemental composition. The metals uptaken from the soil were supposed to be in a similar range, thus the impact of airborne contamination by heavy metal translocation could be studied. The elements investigated were Ba, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sr, and Zn. After harvesting the samples were dried, homogenized, digested and then analysed by ICP-AES. The contents of all elements are in the μg/g range. In the samples of 2012 higher concentrations were found for Co, Cu, Mn, Ni, and Zn, lower concentrations were registered for Ba, Pb, and Sr. The amounts of Cd and Cr were statistically insignificantly lower in 2012 than 2011.

Risk assessment of potentially toxic elements in agricultural soils and maize tissues from selected districts in Tanzania

International Nuclear Information System (INIS)

Marwa, Ernest M.M.; Meharg, Andrew A.; Rice, Clive M.

2012-01-01

A field survey was conducted to investigate the contamination of potentially toxic elements (PTEs) arsenic (As), lead (Pb), chromium (Cr), and nickel (Ni) in Tanzanian agricultural soils and to evaluate their uptake and translocation in maize as proxy to the safety of maize used for human and animal consumption. Soils and maize tissues were sampled from 40 farms in Tanzania and analyzed using inductively coupled plasma-mass spectrometry in the United Kingdom. The results showed high levels of PTEs in both soils and maize tissues above the recommended limits. Nickel levels of up to 34.4 and 56.9 mg kg −1 respectively were found in some maize shoots and grains from several districts. Also, high Pb levels >0.2 mg kg −1 were found in some grains. The grains and shoots with high levels of Ni and Pb are unfit for human and animal consumption. Concentrations of individual elements in maize tissues and soils did not correlate and showed differences in uptake and translocation. However, Ni showed a more efficient transfer from soils to shoots than As, Pb and Cr. Transfer of Cr and Ni from shoots to grains was higher than other elements, implying that whatever amount is assimilated in maize shoots is efficiently mobilized and transferred to grains. Thus, the study recommended to the public to stop consuming and feeding their animals maize with high levels of PTEs for their safety. - Highlights: ► High Ni and Pb levels above the allowable limits were found in maize grains. ► Also maize shoots unfit for animal use were found with high Ni concentrations. ► Mining activities were among the sources of soil contamination. ► The public advised to stop consuming maize with potentially toxic elements.

Development of treatment method for stillage residues of liquid radioactive wastes to remove organic substances and transuranium elements

International Nuclear Information System (INIS)

Rudenko, L.I.; Dzhuzha, O.V.; Khan, V.E.

2008-01-01

The paper presents the results of the study into the laws that govern the process of treating by oxidation the stillage residues of liquid radioactive wastes to remove organic compounds and transuranium elements with the use of hydrogen peroxide, potassium permanganate and subsequent ultra-filtration. The optimum oxidisation regime has been defined on the basis of this study to ensure that the initial dichromate oxidability of LRW's stillage residues decreases from 6,000-9,500 to 500-1,000 mg O/I, whereas the TUE activity associated with the key isotopes is reduced by 74-87 % for 238,239,240 Pu, by 94-95 % for 241 Am, and by 90-95 % for 244 Cm. The concentration of uranium decreases by 94-99 %. It is proposed to implement this method at the Chernobyl NPP site.

Transuranium element toxicity: dose-response relationships at low exposure levels. Summary and speculative interpretation relative to exposure limits

International Nuclear Information System (INIS)

Thompson, R.C.

1975-01-01

A summary is given of information on transuranium element toxicity and the correlation of this information with current established exposure limits. It is difficult to calculate a biologically relevant radiation dose from deposited plutonium; it is exposure that must be controlled in order to prevent biological effect, and if the relationship between exposure and effect is known, then radiation dose is of no concern. There are extensive data on the effects of plutonium in bone. Results of studies at the University of Utah indicate that plutonium in beagles may be as much as ten times more toxic than radium. It has been suggested that this toxicity ratio may be even higher in man than in the beagle dog because of differences in surface-to-volume ratios and differences in the rate of burial of surface-deposited plutonium. The present capabilities for extrapolating dose-effect relationships seem to be limited to the setting of upper limits, based on assumptions of linearity and considerations related to natural background

Effects of temperature on the acute toxicity of heavy metals (Cr, Cd, and Hg) to the freshwater crayfish, Procambarus clarkii (Girard)

Energy Technology Data Exchange (ETDEWEB)

Del Ramo, J.; Diaz-Mayans, J.; Torreblanca, A.; Nunez, A.

1987-05-01

Chromium, an essential trace element for humans and animals is involved in normal carbohydrate metabolism; however, it is toxic at high concentrations. There is no evidence that cadmium and mercury are biologically essential but their toxicity for organisms is well known. Both cause toxic effects at low concentrations to most organisms, especially in combination with other environmental variables such as temperature. Lake Albufera and the surrounding rice field waters are subjected to very heavy loads of sewage and toxic industrial residues (including heavy metals) from the many urban and waste waters in this area. In 1978, the American red crayfish Procambarus clarkii appeared in lake Albufera and in the surrounding rice fields. Without adequate sanitary control, the crayfish is presently being fished commercially for human consumption. The purpose of the present study is to evaluate the degree of toxicity of various heavy metals (chromium, cadmium and mercury) to freshwater crayfish Procambarus clarkii at various temperatures.

The role of glomalin, a protein produced by arbuscular mycorrhizal fungi, in sequestering potentially toxic elements

Energy Technology Data Exchange (ETDEWEB)

Gonzalez-Chavez, M.C.; Carrillo-Gonzalez, R.; Wright, S.F.; Nichols, K.A

2004-08-01

Naturally occurring soil organic compounds stabilize potentially toxic elements (PTEs) such as Cu, Cd, Pb, and Mn. The hypothesis of this work was that an insoluble glycoprotein, glomalin, produced in copious amounts on hyphae of arbuscular mycorrhizal fungi (AMF) sequesters PTEs. Glomalin can be extracted from laboratory cultures of AMF and from soils. Three different experiments were conducted. Experiment 1 showed that glomalin extracted from two polluted soils contained 1.6-4.3 mg Cu, 0.02-0.08 mg Cd, and 0.62-1.12 mg Pb/g glomalin. Experiment 2 showed that glomalin from hyphae of an isolate of Gigaspora rosea sequestered up to 28 mg Cu/g in vitro. Experiment 3 tested in vivo differences in Cu sequestration by Cu-tolerant and non-tolerant isolates of Glomus mosseae colonizing sorghum. Plants were fed with nutrient solution containing 0.5, 10 or 20 {mu}M of Cu. Although no differences between isolates were detected, mean values for the 20 {mu}M Cu level were 1.6, 0.4, and 0.3 mg Cu/g for glomalin extracted from hyphae, from sand after removal of hyphae and from hyphae attached to roots, respectively. Glomalin should be considered for biostabilization leading to remediation of polluted soils. - Glomalin may be useful in remediation of toxic elements in soils.

The role of glomalin, a protein produced by arbuscular mycorrhizal fungi, in sequestering potentially toxic elements

International Nuclear Information System (INIS)

Gonzalez-Chavez, M.C.; Carrillo-Gonzalez, R.; Wright, S.F.; Nichols, K.A.

2004-01-01

Naturally occurring soil organic compounds stabilize potentially toxic elements (PTEs) such as Cu, Cd, Pb, and Mn. The hypothesis of this work was that an insoluble glycoprotein, glomalin, produced in copious amounts on hyphae of arbuscular mycorrhizal fungi (AMF) sequesters PTEs. Glomalin can be extracted from laboratory cultures of AMF and from soils. Three different experiments were conducted. Experiment 1 showed that glomalin extracted from two polluted soils contained 1.6-4.3 mg Cu, 0.02-0.08 mg Cd, and 0.62-1.12 mg Pb/g glomalin. Experiment 2 showed that glomalin from hyphae of an isolate of Gigaspora rosea sequestered up to 28 mg Cu/g in vitro. Experiment 3 tested in vivo differences in Cu sequestration by Cu-tolerant and non-tolerant isolates of Glomus mosseae colonizing sorghum. Plants were fed with nutrient solution containing 0.5, 10 or 20 μM of Cu. Although no differences between isolates were detected, mean values for the 20 μM Cu level were 1.6, 0.4, and 0.3 mg Cu/g for glomalin extracted from hyphae, from sand after removal of hyphae and from hyphae attached to roots, respectively. Glomalin should be considered for biostabilization leading to remediation of polluted soils. - Glomalin may be useful in remediation of toxic elements in soils

Moving toward a precise nutrition: preferential loading of seeds with essential nutrients over non-essential toxic elements.

Directory of Open Access Journals (Sweden)

Mather A. Khan

2014-02-01

Full Text Available Plants and seeds are the main source of essential nutrients for humans and livestock. Many advances have recently been made in understanding the molecular mechanisms by which plants take up and accumulate micronutrients such as iron, zinc, copper and manganese. Some of these mechanisms however, also facilitate the accumulation of non-essential toxic elements such as cadmium (Cd and arsenic (As. In humans, Cd and As intake has been associated with multiple disorders including kidney failure, diabetes, cancer and mental health issues. Recent studies have shown that some transporters can discriminate between essential metals and non-essential elements. Furthermore, sequestration of non-essential elements in roots has been described in several plant species as a key process limiting the translocation of non-essential elements to aboveground edible tissues, including seeds. Increasing the concentration of bioavailable micronutrients (biofortification in grains while lowering the accumulation of non-essential elements will likely require the concerted action of several transporters. This review discusses the most recent advances on mineral nutrition that could be used to preferentially enrich seeds with micronutrients and also illustrates how precision breeding and transport engineering could be used to enhance the nutritional value of crops by re-routing essential and non-essential elements to separate sink tissues (roots and seeds.

Unburned carbon in combustion residues from mainly solid biofuels

Energy Technology Data Exchange (ETDEWEB)

Bjurstroem H; Lind B; Lagerkvist A

2012-02-15

Unburned carbon in 21 combustion residues from solid biofuels is investigated using several methods of analysis (a.o. LOI and TOC), as well as micro-Raman spectroscopy. The results are used to discuss the distribution of unburned carbon in the residues from the different combustion plants and its nature (organic or elemental). The consequences of the elemental nature of carbon for environmental properties of the residue are noted

The contents of fifteen essential trace and toxic elements in some green tea samples and in their infusions

International Nuclear Information System (INIS)

Sahito, S.R.; Kazi, T.G.; Kazi, G.H.; Jakharani, M.A.; Shar, Q.G.; Shaikh, S.

2005-01-01

The content of fifteen elements i.e. Ca, Mg, Na, K, Fe, Mn, Zn, Co, Cu, Cr, Ni, Pd, Cd, Ba and Al were determined for 30 sample from three types of green tea samples using flame atomic absorption spectroscopy. The samples were purchased from authentic tea dealer in Peshawar imported from India, China and Kenya. However, some samples were taken which were locally produced in Pakistan with branded packing and without package. The NBS tea leaves. The wet digestion and infusion procedure reference material was also analyzed simultaneously with tea samples. The wet digestion and infusion procedures were employed for determination of total elements and aqueous extracted elements respectively. It was found that, considerable amount of essential and trace elements are present in total in tea infusion. The levels of toxic metals are low but level of aluminum is high in both forms. The results obtained from this analysis have shown good accuracy and reproducibility. The relative error and relative standard deviation were less than 10% for most of the elements analyzed. (author)

Optic neuritis with residual tunnel vision in perchloroethylene toxicity.

Science.gov (United States)

Onofrj, M; Thomas, A; Paci, C; Rotilio, D

1998-01-01

In a 57-year-old female owner of a dry-cleaning shop, we describe the association of severe bilateral optic neuritis with unexpectedly high concentrations of perchloroethylene/metabolites in the blood and of chloroform in urine. Visual disturbances consisted of complete blindness for 9 days in the left eye, for 11 days in the right eye, with bright phosphenes and pain on eye rotation. Only central (2-3 degrees radius) vision recovered in the following months. Although environmental concentrations of perchloroethylene were within normal limits, we measured five-fold increases in vapors emitted when ironing freshly dry-cleaned fabrics, and suggest that inhalation of perchloroethylene vapors was the cause of this case of ocular nerve toxicity, recapitulating a previous report of major perchloroethylene toxicity.

Acute Toxicity of Fresh and Aged Residues of Pesticides to the Parasitoid Tamarixia radiata and to the HLB-Bacteria Vector Diaphorina citri.

Science.gov (United States)

Beloti, V H; Alves, G R; Moral, R A; Demétrio, C G B; Yamamoto, P T

2018-06-01

One method for controlling the Asian citrus psyllid (ACP) Diaphorina citri Kuwayama, the vector of the putative causal agent of Huanglongbing, uses the parasitoid Tamarixia radiata (Waterston). However, the general intensive use of insecticides has reduced the numbers of this parasitoid. This study evaluated the effect of the residual action of 24 insecticides on T. radiata and also determined the differential toxicity of insecticides to D. citri and T. radiata, using three bioassays. In the first, when adults of the parasitoid were exposed to residues of the 24 insecticides, ten were considered short-life (class 1), six slightly persistent (class 2), five moderately persistent (class 3), and three insecticides were considered persistent (class 4), under the IOBC/WPRS classification system. The second bioassay evaluated the sublethal concentrations of the persistent insecticides (formetanate, dimethoate, spinosad). Increasing the concentrations of the insecticides increased the number that were classified as persistent. In the third bioassay, evaluation of the differential toxicity of eight insecticides to the ACP and the parasitoid showed that chlorpyrifos and bifenthrin were more harmful to T. radiata. Therefore, these two insecticides are not recommended for application at the time of parasitoid release. Cypermethrin, imidacloprid, and dimethoate caused higher mortality of D. citri and are most often recommended in IPM programs. The choice of an insecticide for the control of citrus pests must be made with care, aiming to preserve the natural enemies in the ecosystem, and thereby contribute to the success of biological control.

Assessment of heavy metal residues in water, fish tissue and human ...

African Journals Online (AJOL)

MICHAEL HORSFALL

ABSTRACT: Residual levels of lead, chromium, cadmium and zinc in water and fish tissue from. Ubeji River ... Key Words : Heavy metal residues , Fish tissue, Human blood, Ubeji River. ... is of critical concern because of their toxicity and.

Progress report on analysis for toxic elements in food and drinking water by means of neutron activation analysis

International Nuclear Information System (INIS)

Leelhaphunt, N.; Chueinta, S.; Dejkumhang, M.; Chueinta, W.; Nouchpramool, S.

1988-01-01

From the view point of environmental safety assessment, it is important to find out the information of the levels of toxic elements in foodstuffs for human consumption so as to establish the maximum permissible concentrations of dietary intake of toxic elements for Thai people. This study will consequently be a great help for Thailand's economics in view of quality assurance of our exported foodstuffs as well as the health and welfare of Thai people. In brief, this research covered the following studies: a) development of a proper technique for the determination of arsenic (As), cadmium (Cd), copper (Cu) and zinc (Zn) by ion-exchange chromatography, mercury (Hg) and selenium (Se) by direct combustion technique, bromine (Br), cobalt (Co), iron (Fe) and manganese (Mn) by instrumental neutron activation technique, lead (Pb) by flame atomic absorption spectrometry, b) management of appropriate sample preparation technique, and c) investigation of the amount of As, Cd, Cu, Zn, Hg, Se, Br, Co, Fe, Mn and Pb in various kinds of vegetables, meat, poultry, bean, peas and various species of rice, fish and shellfish. 4 refs, 1 fig., 25 tabs

Risk assessment of potentially toxic element pollution in soils and rice (Oryza sativa) in a typical area of the Yangtze River Delta

International Nuclear Information System (INIS)

Hang Xiaoshuai; Wang Huoyan; Zhou Jianmin; Ma Chengling; Du Changwen; Chen Xiaoqin

2009-01-01

Soil pollution with potentially toxic elements (PTEs) resulting from rapid industrial development has caused major concerns. Selected PTEs and their accumulation and distribution in soils and rice (Oryza sativa) collected from Changshu, east China, were analyzed to evaluate the potential health risk to the local population. The soils were primarily contaminated with Hg, followed by Cu, Cd, Pb, and Zn. The concentrations of Pb, Hg, and Cd of 46, 32, and 1 rice samples exceeded their national maximum allowable levels in foods, respectively. Spatial distributions of total Cr, Cu, Pb, Zn, and Cd in soils shared similar geographical trends. The risk assessment of PTEs through rice consumption suggests that the concentrations of Cu, Pb, and Cd in some rice samples exceed their reference oral dose for adults and children. In general, there was no target hazard quotient value of any individual element that was greater than 1, but hazard index values for adults and children were 1.726 and 1.523, respectively. - Industrial development has led to increased risk from potentially toxic elements in soils and rice.

Essential and toxic elements in foods of dietary intake from Shah Alam, Selangor

International Nuclear Information System (INIS)

Suziana Ismail; Zaini Hamzah; Abdul Khalik Wood

2005-01-01

There is growing concern all over the world on health-related problems due to the foods consumed by the people. One of the area is the human exposure to metals (essential as well as toxic) which can be studied using a various techniques. Variety of daily food samples collected from various food outlets in a different area were studied. The selected foods were collected from various restaurant and food stalls around Shah Alam, Selangor. The chosen sets, including breakfast, lunch and dinner, were blended together, dried, and analyzed for its elemental contents using neutron activation analysis (NAA technique. The results show a variation of elemental contents in relation to the type of foods studied. The Na ranges from 0.91 to 4.1%, K ranges from 1.65% to 3.35%, Ca ranges from 1.03 to 21.39 ppm, Zn ranges from 11.32 to 18.49 ppm, Co ranges from 0.10 to 0.19 ppm, Mn ranges from 0.12 to 0.55 ppm, Cr ranges from 0.52 to 1.06 ppm and As ranges from 0.25 to 0.92 ppm. (Author)

Elemental analysis of Uranouchi bay seabed sludge using PIXE

International Nuclear Information System (INIS)

Kabir, M. Hasnat; Narusawa, Tadashi; Nishiyama, Fumitaka; Sumi, Katsuhiro

2006-01-01

Elemental analyses were carried out for the seabed sludge collected from Uranouchi bay (Kochi, Japan) using Particle Induced X-ray Emission (PIXE). Seabed-sludge contamination with heavy metals as well as toxic elements becomes one of the most serious environmental problems. The aim of the present study is to investigate the polluted areas in the bay by heavy and toxic elements. As a results of analyses of samples collected from eleven different places in the bay, seventeen elements including toxic ones were detected. The results suggest that the center region of the bay is seriously contaminated by heavy and toxic elements in comparison with the other areas in the bay. (author)

Evaluation of trace element status of food articles

International Nuclear Information System (INIS)

Qureshi, I.H.; Ahmad, S.; Zaidi, S.J.; Mannan, A.; Waheed, S.; Fatima, I.; Arif, M.; Rahman, A.

1996-01-01

Food is the main source of major, minor and micro nutrients required for human beings. Food articles, due to environmental pollution may also contain some toxic elements which would adversely affect their health. In order to assess the adequacy and safety of human diet main food items were analyzed for the measurement of essential and toxic trace elements employing neutron activation analysis and atomic absorption spectrometry. The data so obtained will serve as baseline values and will be helpful to monitor the changes in the trace element contents of these items in future. The dietary intake of essential and toxic trace elements through these items was estimated and compared with the recommended values. This study indicates that the intake of essential elements except for co is fairly adequate and that of toxic elements in well well within the permissible limits. (author)

Biosorption: An Interplay between Marine Algae and Potentially Toxic Elements-A Review.

Science.gov (United States)

Bilal, Muhammad; Rasheed, Tahir; Sosa-Hernández, Juan Eduardo; Raza, Ali; Nabeel, Faran; Iqbal, Hafiz M N

2018-02-19

In recent decades, environmental pollution has emerged as a core issue, around the globe, rendering it of fundamental concern to eco-toxicologists, environmental biologists, eco-chemists, pathologists, and researchers from other fields. The dissolution of polluting agents is a leading cause of environmental pollution of all key spheres including the hydrosphere, lithosphere, and biosphere, among others. The widespread occurrence of various pollutants including toxic heavy metals and other emerging hazardous contaminants is a serious concern. With increasing scientific knowledge, socioeconomic awareness, human health problems, and ecological apprehensions, people are more concerned about adverse health outcomes. Against this background, several removal methods have been proposed and implemented with the aim of addressing environmental pollution and sustainable and eco-friendly development. Among them, the biosorption of pollutants using naturally inspired sources, e.g., marine algae, has considerable advantages. In the past few years, marine algae have been extensively studied due to their natural origin, overall cost-effective ratio, and effectiveness against a broader pollutant range; thus, they are considered a potential alternative to the conventional methods used for environmental decontamination. Herein, an effort has been made to highlight the importance of marine algae as naturally inspired biosorbents and their role in biosorption. Biosorption mechanisms and factors affecting biosorption activities are also discussed in this review. The utilization of marine algae as a biosorbent for the removal of numerous potentially toxic elements has also been reviewed.

Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

Interaction of arbuscular mycorrhizal symbionts with arsenic and other potentially toxic elements

International Nuclear Information System (INIS)

Khairuddin Abdul Rahim

2000-01-01

The response of arbuscular mycorrhizal (AM) symbionts to arsenic, and arsenic interactions with phosphorus and potentially toxic elements (PTEs) in soils from a former arsenic mine, the Devon Great Consols, were investigated. The objective was to determine whether AM associations ameliorate arsenic toxicity in Plantago lanceolata and Agrostis capillaris, plants commonly found at abandoned mines. An exploratory investigation indicated the richness in biodiversity of AMF that colonised plants growing at the site. Arsenic was found at high concentrations and was strongly associated with copper and iron. P. lanceolata was always colonised by AMF, while colonisation of A. capillaris was variable. There was no evidence in the field of soil pH or PTEs influencing AMF colonisation and spore density. There was no strong correlation between arsenic content in plant and available arsenic, obtained through various extraction methods. Spore germination and infectivity in the mine soils were strongly influenced by the AMF genotype and to a lesser extent by the soil environment. P. lanceolata and A. capillaris root growth was inhibited at arsenic concentrations of ≥50 μg g -1 in agar. Bioavailability experiments using mine soils and Terra-Green TM (calcined attapulgite) spiked with sodium arsenate gave no evidence that AMF-colonised plants translocated less arsenic to the shoots. Plants accumulated more arsenic in their roots than in their shoots, whether they were colonised by AMF or not. The A. capillaris genotype used in the present study translocated less of both arsenic and phosphorus to its shoots than P. lanceolata. High available phosphorus in Terra-Green TM protected plants against arsenic toxicity, at -1 As. There was evidence for inhibition by arsenic in AMF colonisation of roots. For quantifying AMF extra radical hyphae contribution to arsenic transportation from growth medium to plant using a compartmented pot system, the use of low phosphorus medium and a longer

Application of PIXE, NAA and other techniques to the determination of toxic elements in Bangladesh foodstuffs and drinking waters

International Nuclear Information System (INIS)

Tarafdar, S.A.; Khan, A.H.

1988-01-01

The main objective of the food monitoring programme is to study the applicability of PIXE, XRF, NAA and other related methods to toxic and essential trace elements analyses in foodstuffs and drinking water under the coordinated research programme of the IAEA and to collect baseline data on the status of such elements in foodstuffs and drinking water. The commonly consumed representative foodstuffs selected for Bangladesh are: rice, wheat, green vegetables, fish, milk and egg. In the previous year, only food items were studied but in this report drinking water is also included. The elements required by the project protocol are Cu, Cr, Fe, As, Se, Sb, Cd, Pb and Hg. In this report, the results obtained during the last contract period are presented with a plan for future work. 4 refs, 2 tabs

Leaching from municipal solid waste incineration residues

Energy Technology Data Exchange (ETDEWEB)

Hyks, J.

2008-02-15

Leaching of pollutants from Municipal Solid Waste Incineration (MSWI) residues has been investigated combining a range of laboratory leaching experiments with geochemical modeling. Special attention was paid to assessing the applicability of laboratory data for subsequent modeling with respect to presumed full-scale conditions; both sample pretreatment and actual influence of leaching conditions on the results of laboratory experiments were considered. It was shown that sample pretreatment may have large impact on leaching test data. In particular, a significant fraction of Pb was shown mobile during the washing of residues with water. In addition, drying of residues (i.e. slow oxidation) prior to leaching experiments increased the leaching of Cr significantly. Significant differences regarding the leaching behavior of individual elements with respect to (non)equilibrium conditions in column percolation experiments were observed in the study. As a result, three groups of elements were identified based on the predominant leaching control and the influence of (non)equilibrium on the results of the laboratory column experiments: I. Predominantly availability-controlled elements (e.g. Na, K, Cl) II. Solubility-controlled elements (e.g. Ca, S, Si, Al, Ba, and Zn) III. Complexation-controlled elements (e.g. Cu and Ni) With respect to the above groups it was suggested that results of laboratory column experiments can, with consideration, be used to estimate full-scale leaching of elements from Group I and II. However, in order to avoid large underestimations in the assessment of leaching from Group III, it is imperative to describe the time-dependent transport of dissolved organic carbon (DOC) in the tested system or to minimize the physical non-equilibrium during laboratory experiments (e.g. bigger column, slower flow velocity). Forward geochemical modeling was applied to simulate long-term release of elements from a MSWI air-pollution-control residue. Leaching of a

Purification of the Drain Water and Distillation Residues from Organic Compounds, Transuranic Elements and Uranium at the Chernobyl NPP

Directory of Open Access Journals (Sweden)

Rudenko, L.I.

2014-05-01

Full Text Available Article examines the purification of drain water and distillation residue from organic (polymeric compounds, tran suranic elements and uranium. We propose the pretreatment method with the use of a type «Sizol» coagulant-flocculant and catalytic oxidation with hydrogen peroxide and ultrafiltration. This method prevents evaporator coking by dustsuppression and other organic substances, which are vulcanized by heating. Removing alpha-emitting radionuclides increases safety level at the nuclear power plant.

Percentage of toxic trace elements; Pb, Cr and Cd in certain plastic toys, Isfahan City

Directory of Open Access Journals (Sweden)

F Kavehzadeh

2006-04-01

Full Text Available Introduction: Recent investigations have detected the presence of significant levels of heavy metals (chromium, lead and cadmium in toys and other PVC products manufactured for children. In some countries, addition of compounds containing toxic metals to toys are limited or prohibited. Methods: To evaluate the safety of some of the plastic toys in the city of Isfahan with respect to toxic trace metals, pb, cr and cd, 75 samples of three types of toys were collected from the toy shop’s and were digested with acid with the two methods ISIRI and ASTM. The heavy metals were determined using atomic absorption spectrophotometer. Variance analysis and T-test were used for data analysis. Results: The result of the study showed that the products tested contained lead, chromium and cadmium and the highest and lowest concentration were related to Pb and Cd, respectively. The statistical analysis of the samples showed that there are no significant differences between ASTM and ISIRI digestion methods. The study revealed that none of the heavy metals in the toy samples exceeded the recommended standard levels. Highest average concentration of Pb and Cd were related to toys with green color and the highest Cr concentration was related to yellow toys in this study. Conclusion: Extensive studies are required to evaluate the quality of the toys being used by children and the toxic trace elements should be eliminated from the plastic materials used for making toys.

Application of photon activation analysis to the determination of the distribution of toxic elements in soil of a sewage farm

International Nuclear Information System (INIS)

Segebade, C.; Schmitt, B.F.; Fusban, H.U.; Kuehl, M.

1984-01-01

Bore-cores, taken from waste water charged and closely neighbouring virgin soil regions within the sewage farm in Berlin-Karolinenhoehe were investigated. The distributions of numerous elements along the bore-core length (or soil depth, respectively) were analysed with particular emphasis laid upon toxic components. As many as 27 elements were analysed. By comparison of the concentration profiles the significant partition of anthropogenic pollutants becomes obvious. Instrumental photon activation analysis using an electron accelerator - being a multielement technique - has proven to be a suitable tool for the given analytical task. With this method, elements can be analysed which are not or not readily determinable with other comparable instrumental techniques (thermal neutron activation analysis in particular), e.g. Ni, Tl and Pb. (orig.) [de

Trophic transfer of toxic elements in the estuarine invertebrate and fish food web of Daliao River, Liaodong Bay, China

International Nuclear Information System (INIS)

Guo, Bobo; Jiao, Deqi; Wang, Jing; Lei, Kai; Lin, Chunye

2016-01-01

In order to study element accumulation and trophic transfer in the food web, sixteen benthic invertebrate species and nine fish species were collected from the Daliao River estuary for analysis of toxic elements and nitrogen stable isotope in the muscle tissue. The concentrations ranged between 1.44–17.98, 0.01–9.30, 0.17–36.15, 0.7–145.4, 0.01–0.33, 0.14–14.88, 0.10–2.51, 0.02–0.14, and 19.3–221.1 mg kg −1 for As, Cd, Cu, Hg, Ni, Pb, Sb, and Zn, respectively. As, Cd, Cu, and Zn were significantly higher in the benthic invertebrates than in fish, whereas Hg and Sb were significantly lower. In addition, the benthic invertebrates were characterized by the highest bioaccumulation factor (BAF) for Cd, whereas the fish were characterized by the highest BAF for Hg. A significant decrease in Cd, Cr, Cu, and Ni levels, and a significant increase in Hg and Sb levels were observed with increasing trophic levels. - Highlights: • Toxic elements and trophic level were determined in biota from Daliao River estuary. • Benthic invertebrates had higher As, Cd, Cu, Zn and lower Hg and Sb levels than fish. • Benthic invertebrates accumulated high As levels, while fish accumulated high Hg levels. • Cd, Cr, Cu, Ni levels decreased, and Hg and Sb levels increased with trophic levels.

Characterization of toxic waste produced in PYMES manufacturing detergents

International Nuclear Information System (INIS)

Campuzano, Silvia; Camacho, Judith Elena; Alvarez, Alicia

2006-01-01

From the protection of the environment, the problem of the residuals squatter a main place in the environmental administration; presently study a test pilot was standardized, to characterize the toxic waste generated in the production of detergents, to standardize methods of chemical valuation and microbiological of polluted waters that allow later on to apply methods of biological purification and processes of bio-treatment of residuals, the project macro of handling of toxic waste it was addressed this way in small and medium companies producers of detergents. The presence settled down of toxic in the studied waste, represented in surfactants significant amounts, phenols, hydrocarbons, fat and phosphates and the decrease of its quantity in front of the action of bacteria, situation that allowed concluding that the approach to the biotransformation process could be carried out

k0-INAA measurement of levels of toxic elements in oil sludge and their leachability

International Nuclear Information System (INIS)

Syazwani Mohd Fadzil; Kok Siong Khoo; Sukiman Sarmani; Majid, A.A.; Ainon Hamzah

2011-01-01

Development of the petroleum industry has resulted in increasing production of oil sludge, the disposal of which risks introducing hazardous elements into the environment. In the frames of these studies the presence of the toxic metals arsenic, chromium and zinc in oil sludge and the leachability of those toxins. Samples were obtained from a refinery plant in Sg Udang, Melaka and from the Miri Crude Oil Terminal, Sarawak, both in Malaysia. k 0 -Instrumental Neutron Activation Analysis was used to measure mass fractions of elements. The samples were packed and irradiated in a TRIGA Mark II reactor. Mass fraction of arsenic in the oil sludge samples were found to be higher than the EPA pollutant mass fraction limit; mass fractions of chromium and zinc were below of this limit. Samples were also tested for leachability, which was found to be contributed to by controlled diffusion. Slow leachability of arsenic was found to be higher than the EPA limit in these oil sludge samples, influenced by such factors as redox condition. It was found however, that the most leachable of these elements in all samples from both sites was zinc, followed by arsenic and chromium, indicating that zinc may present a more serious threat of environmental contamination than the other two. (author)

Finite element concept to derive isostatic residual maps ...

Indian Academy of Sciences (India)

These produce large regional lows that override or tend to mask the smaller anomalies originating from the mid and upper crustal geologic structures. The interpretation and understanding of these structures depend on how effectively the regional gravity anoma- lies are isolated so as to construct the isostatic residual maps.

Antibiotic Residues - A Global Health Hazard

Directory of Open Access Journals (Sweden)

Nisha A.R.

Full Text Available Use of Antibiotic that might result in deposition of residues in meat, milk and eggs must not be permitted in food intended for human consumption. If use of antibiotics is necessary as in prevention and treatment of animal diseases, a withholding period must be observed until the residues are negligible or no longer detected. The use of antibiotics to bring about improved performance in growth and feed efficiency, to synchronize or control of reproductive cycle and breeding performance also often lead to harmful residual effects. Concern over antibiotic residues in food of animal origin occurs in two times; one which produces potential threat to direct toxicity in human, second is whether the low levels of antibiotic exposure would result in alteration of microflora, cause disease and the possible development of resistant strains which cause failure of antibiotic therapy in clinical situations. A withdrawal period is established to safeguard human from exposure of antibiotic added food. The withdrawal time is the time required for the residue of toxicological concern to reach safe concentration as defined by tolerance. It is the interval from the time an animal is removed from medication until permitted time of slaughter. Heavy responsibility is placed on the veterinarian and livestock producer to observe the period for a withdrawal of a drug prior to slaughter to assure that illegal concentration of drug residue in meat, milk and egg do not occur. Use of food additives may improve feed efficiency 17% in beef cattle, 10% in lambs, 15% in poultry and 15% in swine. But their indiscriminate use will produce toxicity in consumers. WHO and FAO establish tolerances for a drug, pesticide or other chemical in the relevant tissues of food producing animals. The tolerance is the tissue concentration below, which a marker residue for the drug or chemical must fall in the target tissue before that animal edible tissues are considered safe for human

Pesticide residues and bees--a risk assessment.

Directory of Open Access Journals (Sweden)

Francisco Sanchez-Bayo

Full Text Available Bees are essential pollinators of many plants in natural ecosystems and agricultural crops alike. In recent years the decline and disappearance of bee species in the wild and the collapse of honey bee colonies have concerned ecologists and apiculturalists, who search for causes and solutions to this problem. Whilst biological factors such as viral diseases, mite and parasite infections are undoubtedly involved, it is also evident that pesticides applied to agricultural crops have a negative impact on bees. Most risk assessments have focused on direct acute exposure of bees to agrochemicals from spray drift. However, the large number of pesticide residues found in pollen and honey demand a thorough evaluation of all residual compounds so as to identify those of highest risk to bees. Using data from recent residue surveys and toxicity of pesticides to honey and bumble bees, a comprehensive evaluation of risks under current exposure conditions is presented here. Standard risk assessments are complemented with new approaches that take into account time-cumulative effects over time, especially with dietary exposures. Whilst overall risks appear to be low, our analysis indicates that residues of pyrethroid and neonicotinoid insecticides pose the highest risk by contact exposure of bees with contaminated pollen. However, the synergism of ergosterol inhibiting fungicides with those two classes of insecticides results in much higher risks in spite of the low prevalence of their combined residues. Risks by ingestion of contaminated pollen and honey are of some concern for systemic insecticides, particularly imidacloprid and thiamethoxam, chlorpyrifos and the mixtures of cyhalothrin and ergosterol inhibiting fungicides. More attention should be paid to specific residue mixtures that may result in synergistic toxicity to bees.

Weld residual stress according to the ways of heat input in the simulation of weld process using finite element analysis

International Nuclear Information System (INIS)

Yang, Jun Seog; Lee, Kyoung Soo; Park, Chi Yong

2008-01-01

This paper is to discuss distribution of welding residual stresses of a ferritic low alloy steel nozzle with dissimilar metal weld using Alloy 82/182. Two Dimensional (2D) thermo-mechanical finite element analyses are carried out to simulate multi-pass welding process on the basis of the detailed and fabrication data. On performing the welding analysis generally, the characteristics on the heat input and heat transfer of weld are affected on the weld residual stress analyses. Thermal analyses in the welding heat cycle process is very important process in weld residual stress analyses. Therefore, heat is rapidly input to the weld pass material, using internal volumetric heat generation, at a rate which raises the peak weld metal temperature to 2200 .deg. C and the base metal adjacent to the weld to about 1400 .deg. C. These are approximately the temperature that the weld metal and surrounding base materials reach during welding. Also, According to the various ways of applying the weld heat source, the predicted residual stress results are compared with measured axial, hoop and radial through-wall profiles in the heat affected zone of test component. Also, those results are compared with those of full 3-dimensional simulation

Bio- and toxic elements in edible wild mushrooms from two regions of potentially different environmental conditions in eastern Poland.

Science.gov (United States)

Brzezicha-Cirocka, Justyna; Mędyk, Małgorzata; Falandysz, Jerzy; Szefer, Piotr

2016-11-01

In the present study, the composition of bio-elements (K, Na, Mg, Ca, Fe, Cu, Zn) and toxic elements (Ag, Cd) in seven edible mushrooms from the rural and woodland region of Morąg (north-eastern Poland) and the rural and industrial region of the Tarnobrzeska Upland (south-eastern Poland) were investigated using a validated method. The species examined were Boletus edulis, Cantharellus cibarius, Leccinum aurantiacum, Leccinum versipelle, Lycoperdon perlatum, Suillus luteus, and Xerocomus subtomentosus. Final determination was carried out by flame atomic absorption spectroscopy (FAAS) after microwave-assisted decomposition of sample matrices with solutions of concentrated nitric acid in the pressurized polytetrafluoroethylene vessels. The contents of the alkali elements and alkali earth elements were determined in the species surveyed. The alkali elements, earth alkali elements, and transition metals (Ag, Cu, Zn, Fe, and Mn) were at typical concentrations as was determined for the same or similar species elsewhere in Poland and Europe. The results may suggest a lack of local and regional emissions of those metallic elements from industrialization of some sites in the Tarnobrzeska Plain. Cadmium was at elevated concentrations in L. versipelle from the Tarnobrzeska Plain but the reason-pollution or geogenic source-was unknown, while it was at typical concentrations in other species.

Technospheric Mining of Rare Earth Elements from Bauxite Residue (Red Mud): Process Optimization, Kinetic Investigation, and Microwave Pretreatment.

Science.gov (United States)

Reid, Sable; Tam, Jason; Yang, Mingfan; Azimi, Gisele

2017-11-10

Some rare earth elements (REEs) are classified under critical materials, i.e., essential in use and subject to supply risk, due to their increasing demand, monopolistic supply, and environmentally unsustainable and expensive mining practices. To tackle the REE supply challenge, new initiatives have been started focusing on their extraction from alternative secondary resources. This study puts the emphasis on technospheric mining of REEs from bauxite residue (red mud) produced by the aluminum industry. Characterization results showed the bauxite residue sample contains about 0.03 wt% REEs. Systematic leaching experiments showed that concentrated HNO 3 is the most effective lixiviant. However, because of the process complexities, H 2 SO 4 was selected as the lixiviant. To further enhance the leaching efficiency, a novel process based on microwave pretreatment was employed. Results indicated that microwave pretreatment creates cracks and pores in the particles, enabling the lixiviant to diffuse further into the particles, bringing more REEs into solution, yielding of 64.2% and 78.7% for Sc and Nd, respectively, which are higher than the maximum obtained when HNO 3 was used. This novel process of "H 2 SO 4 leaching-coupled with-microwave pretreatment" proves to be a promising technique that can help realize the technological potential of REE recovery from secondary resources, particularly bauxite residue.

Mobility of organic carbon from incineration residues

International Nuclear Information System (INIS)

Ecke, Holger; Svensson, Malin

2008-01-01

Dissolved organic carbon (DOC) may affect the transport of pollutants from incineration residues when landfilled or used in geotechnical construction. The leaching of dissolved organic carbon (DOC) from municipal solid waste incineration (MSWI) bottom ash and air pollution control residue (APC) from the incineration of waste wood was investigated. Factors affecting the mobility of DOC were studied in a reduced 2 6-1 experimental design. Controlled factors were treatment with ultrasonic radiation, full carbonation (addition of CO 2 until the pH was stable for 2.5 h), liquid-to-solid (L/S) ratio, pH, leaching temperature and time. Full carbonation, pH and the L/S ratio were the main factors controlling the mobility of DOC in the bottom ash. Approximately 60 weight-% of the total organic carbon (TOC) in the bottom ash was available for leaching in aqueous solutions. The L/S ratio and pH mainly controlled the mobilization of DOC from the APC residue. About 93 weight-% of TOC in the APC residue was, however, not mobilized at all, which might be due to a high content of elemental carbon. Using the European standard EN 13 137 for determination of total organic carbon (TOC) in MSWI residues is inappropriate. The results might be biased due to elemental carbon. It is recommended to develop a TOC method distinguishing between organic and elemental carbon

Distribution of toxic trace elements in soil/sediment in post-Katrina New Orleans and the Louisiana Delta

International Nuclear Information System (INIS)

Su Tingzhi; Shu Shi; Shi Honglan; Wang Jianmin; Adams, Craig; Witt, Emitt C.

2008-01-01

This study provided a comprehensive assessment of seven toxic trace elements (As, Pb, V, Cr, Cd, Cu, and Hg) in the soil/sediment of Katrina affected greater New Orleans region 1 month after the recession of flood water. Results indicated significant contamination of As and V and non-significant contamination of Cd, Cr, Cu, Hg and Pb at most sampling sites. Compared to the reported EPA Region 6 soil background inorganic levels, except As, the concentrations of other six elements had greatly increased throughout the studied area; St. Bernard Parish and Plaquemines Parish showed greater contamination than other regions. Comparison between pre- and post-Katrina data in similar areas, and data for surface, shallow, and deep samples indicated that the trace element distribution in post-Katrina New Orleans was not obviously attributed to the flooding. This study suggests that more detailed study of As and V contamination at identified locations is needed. - This article provides an in-depth assessment of the contamination of As, Pb, V, Cr, Cd, Cu, and Hg in post-Katrina greater New Orleans region

A Systematic Review on Exposure to Toxic and Essential Elements through Black Tea Consumption in Iran: Could It be a Major Risk for Human Health?

Directory of Open Access Journals (Sweden)

Elahe Rezaee

2014-01-01

Conclusions: The hazard of excessive element intake through black tea consumption should be considered as negligible in Iran. However, related risk for manganese appeared to be more than toxic metals.

Importance of dose metrics for lethal and sublethal sediment metal toxicity in the oligochaete worm Lumbriculus variegatus

Energy Technology Data Exchange (ETDEWEB)

Penttinen, O.P.; Kilpi-Koski, J.; Toivainen, K. [Helsinki Univ., Lahti (Finland). Dept. of Ecology end Environmental Sciences; Jokela, M. [Mikkeli Univ. of Applied Sciences, Mikkeli (Finland); Vaeisaenen, A. [Jyvaeskylae Univ. (Finland). Dept. of Chemistry

2008-02-15

Background, aims, and scope. There is an increasing demand for controlled toxicity tests to predict biological effects related to sediment metal contamination. In this context, questions of metal-specific factors, sensitivity of toxicity endpoints, and variability in exposure duration arise. In addition, the choice of the dose metrics for responses is equally important and is related to the applicability of the concept of critical body residue (CBR) in exposure assessments, as well as being the main focus of this study. Methods. Experiments were conducted to assess toxicity of Cd, Cr, Cu and Pb to the oligochaete worm Lumbriculus variegatus with the aim of determining CBRs for two response metrics. Mortality and feeding activity of worms exposed to sediment-spiked metals were used as end-points in connection with residue analyses from both the organisms and the surrounding media. Results. LC50 values were 0.3, 1.4, 5.2, and 6.7 mg/L (from 4.7 {mu}mol/L to 128.0 {mu}mol/L), and the order of toxicity, from most toxic to least toxic, was Cu > Cd > Pb>Cr. By relating toxicity to body residue, variability in toxicity among the metals decreased and the order of toxicity was altered. The highest lethal residue value was obtained for Cu (10.8 mmol/kg) and the lowest was obtained for Cd (2.3 mmol/kg). In the 10-d sublethal test, both time and metal exposure were an important source of variation in the feeding activity of worms. The significant treatment effects were observed from worms exposed to Cd or Pb, with the controls yielding the highest feeding rate. However, quantitative changes in the measured end-point did not correlate with the exposure concentrations or body residues, which remained an order of magnitude lower than in the acute exposures. (orig.)

A finite element elastic-plastic analysis of residual stresses due to clad welding in reactor vessels

International Nuclear Information System (INIS)

Buchalet, C.; Riccardella, P.C.

1972-01-01

Residual stresses due to weld deposited cladding on the inside of a typical Westinghouse pressurized water reactor vessel are investigated using an axisymmetric finite element elastic-plastic analysis. At the beginning of the analysis, one head of the weld cladding is assumed to lie on the reactor vessel wall at melting temperature (2600degF), but in the solid phase, while the vessel remains at 300degF (preheat temperature). All material properties used in the calculations are taken as temperature-dependent. Temperature profiles are obtained in the cladding and base metal at several discrete time intervals. These temperatures profiles are used to obtain the stress distribution for the same time intervals. Residual hoop tensile stresses of approximately 25 ksi were found to exist in the cladding. Peak tensile stresses in the hoop direction occur in the base metal near the cladding interface and reach a value of 60 ksi at the end of the transient. The tensile stress decreases very rapidly through the thickness of the base metal and becomes insignificant at about two inches from the inside surface. In order to lower residual stresses, a post-weld heat treatment is performed by uniformly heating the vessel to 1100degF, holding at that temperature for a specified period of time and then cooling slowly. The analysis shows that after this treatment, the peak stresses in the base metal decrease from 60 ksi to 32 ksi, while the stress in the cladding does not change significantly. (author)

Immunoglobulin kappa deleting element rearrangements in precursor-B acute lymphoblastic leukemia are stable targets for detection of minimal residual disease by real-time quantitative PCR

NARCIS (Netherlands)

van der Velden, V. H. J.; Willemse, M. J.; van der Schoot, C. E.; Hählen, K.; van Wering, E. R.; van Dongen, J. J. M.

2002-01-01

Immunoglobulin gene rearrangements are used as PCR targets for detection of minimal residual disease (MRD) in acute lymphoblastic leukemia (ALL). We Investigated the occurrence of monoclonal immunoglobulin kappa-deleting element (IGK-Kde) rearrangements by Southern blotting and PCR/heteroduplex

Speciation of trace elements in the environmental studies

International Nuclear Information System (INIS)

Reddy, A.V.R.

2012-01-01

Elements present at trace levels, often referred as trace elements, play an important role in the environment and in the functioning of life on our planet. Trace elements in environment present as free metal ions or incorporated into colloids or attached to particulate matter or exist in different physical and chemical forms. It is well established that some elements are highly toxic and some are essential, but can become toxic at higher doses. It is also now known that the forms of elements (speciation) and their amounts are more important than the chemical dose of the elements as their interaction depends on different species. For example, Cr(VI) ions are considered far more toxic than Cr(III), whereas As(III) is more toxic than As(V). Similarly, in the case of mercury, both methylmercury and inorganic mercury are toxic but they show different levels of toxicity. Thus the adverse effects depend on the nature of species of the elements and therefore speciation studies are of paramount importance in many areas like toxicology, environmental chemistry and geochemisty. In view of this, speciation studies is a challenge to analytical chemists as the measurement methodologies have to be carefully developed, validated and applied. The grand challenge is to obtain quality data ensuring traceability, as the data obtained will be used in modeling for predicting the environmental impacts. In this talk importance of speciation and challenges to environmental analytical chemists will be discussed along with the following three speciation studies on Cr, U and Hg which were carried out in our laboratories

Residual stress analysis in reactor pressure vessel attachments

International Nuclear Information System (INIS)

Dexter, R.J.; Pont, D.

1991-08-01

Residual stresses in cladding and welded attachments could contribute to the problem of stress-corrosion cracking in boiling-water reactors (BWR). As part of a larger program aimed at quantifying residual stress in BWR components, models that would be applicable for predicting residual stress in BWR components are reviewed and documented. The review includes simple methods of estimating residual stresses as well as advanced finite-element software. In general, simple methods are capable of predicting peak magnitudes of residual stresses but are incapable of adequately characterizing the distribution of residual stresses. Ten groups of researchers using finite-element software are reviewed in detail. For each group, the assumptions of the model, possible simplifications, material property data, and specific applications are discussed. The most accurate results are obtained when a metallurgical simulation is performed, transformation plasticity effects are included, and the heating and cooling parts of the welding thermal cycle are simulated. Two models are identified which can provide these features. The present state of these models and the material property data available in the literature are adequate to quantify residual stress in BWR components

Food plant toxicants and safety - Risk assessment and regulation of inherent toxicants in plant foods

DEFF Research Database (Denmark)

Essers, A.J.A.; Alink, G.M.; Speijers, G.J.A.

1998-01-01

The ADI as a tool for risk management and regulation of food additives and pesticide residues is not readily applicable to inherent food plant toxicants: The margin between actual intake and potentially toxic levels is often small; application of the default uncertainty factors used to derive ADI...... values, particularly when extrapolating from animal data, would prohibit the utilisation of the food, which may have an overall beneficial health effect. Levels of inherent toxicants are difficult to control; their complete removal is not always wanted, due to their function for the plant or for human...... health. The health impact of the inherent toxicant is often modified by factors in the food, e.g. the bioavailability from the matrix and interaction with other inherent constituents. Risk-benefit analysis should be made for different consumption scenarios, without the use of uncertainty factors. Crucial...

Risk element immobilization/stabilization potential of fungal-transformed dry olive residue and arbuscular mycorrhizal fungi application in contaminated soils.

Science.gov (United States)

García-Sánchez, Mercedes; Stejskalová, Tereza; García-Romera, Inmaculada; Száková, Jiřina; Tlustoš, Pavel

2017-10-01

The use of biotransformed dry olive residue (DOR) as organic soil amendment has recently been proposed due to its high contents of stabilized organic matter and nutrients. The potential of biotransformed DOR to immobilize risk elements in contaminated soils might qualify DOR as a potential risk element stabilization agent for in situ soil reclamation practices. In this experiment, the mobility of risk elements in response to Penicillium chrysogenum-10-transformed DOR, Funalia floccosa-transformed DOR, Bjerkandera adusta-transformed DOR, and Chondrostereum purpureum-transformed DOR as well as arbuscular mycorrhizal fungi (AMF), Funneliformis mosseae, inoculation was investigated. We evaluated the effect of these treatments on risk element uptake by wheat (Triticum aestivum L.) plants in a pot experiment with Cd, Pb, and Zn contaminated soil. The results showed a significant impact of the combined treatment (biotransformed DOR and AMF inoculation) on wheat plant growth and element mobility. The mobile proportions of elements in the treated soils were related to soil pH; with increasing pH levels, Cd, Cu, Fe, Mn, P, Pb, and Zn mobility decreased significantly (r values between -0.36 and -0.46), while Ca and Mg mobility increased (r = 0.63, and r = 0.51, respectively). The application of biotransformed DOR decreased risk element levels (Cd, Zn), and nutrient concentrations (Ca, Cu, Fe, Mg, Mn) in the aboveground biomass, where the elements were retained in the roots. Thus, biotransformed DOR in combination with AMF resulted in a higher capacity of wheat plants to grow under detrimental conditions, being able to accumulate high amounts of risk elements in the roots. However, risk element reduction was insufficient for safe crop production in the extremely contaminated soil. Copyright © 2017 Elsevier Ltd. All rights reserved.

Scale-up study on combustibility and emission formation with two biomass fuels (B quality wood and pepper plant residue) under BFB conditions

Energy Technology Data Exchange (ETDEWEB)

Khan, Atif Ahmed; de Jong, Wiebren; Jansens, Peter Johannes [Department of Process and Energy, Section Energy Technology, Faculty 3ME, Delft University of Technology, Leeghwaterstraat 44, NL-2628 CA, Delft (Netherlands); Aho, Martti; Vainikka, Pasi [VTT Processes, P.O. Box 1603, 40101 Jyvaeskylae (Finland); Spliethoff, Hartmut [TU Munich, Lehrstuhl fuer Thermische Kraftanlagen, Boltzmannstrasse 15, D-85748 Garching (Germany)

2008-12-15

Combustion of two biomass fuels: demolition wood (DW) and pepper plant residue (PPR), was investigated from an emission viewpoint in a 20 kW{sub th} fluidized bubbling bed reactor and a 1 MW{sub th} fluidized bubbling bed test boiler. Fluidization velocity and boiler output were varied in the larger facility whereas they were kept constant in the smaller reactor. Traditional flue gases were analyzed. In addition, impactor measurements were carried out to determine the mass flow of the finest fly ash and toxic elements. These measurements were compared with EU emission directives for biomass co-incineration. It was possible to combust DW without operational problems. However, the DW was contaminated with lead, which tended to get strongly enriched in the fine fly ash. Pb tends to be adsorbed on the measurement line surfaces stronger than many other toxic elements and therefore proved difficult to collect and measure. Enrichment of Pb in the fine fly ash can be weakened by co-firing DW with PPR. Increasing the share of PPR up to 50% markedly reduces the toxic metal concentration in the finest fly ash. This, however, leads to increased mass flow of fine fly ash and increases the potential risks of operational problems such as bed agglomeration and fouling. (author)

Long-term toxicity assessment of soils in a recovered area affected by a mining spill

International Nuclear Information System (INIS)

Romero-Freire, A.; García Fernández, I.; Simón Torres, M.; Martínez Garzón, F.J.; Martín Peinado, F.J.

2016-01-01

Residual pollution in the Guadiamar Green Corridor still remains after Aználcollar mine spill in 1998. The polluted areas are identified by the absence of vegetation, soil acidic pH and high concentrations of As, Pb, Zn and Cu. Soil toxicity was assessed by lettuce root elongation and induced soil respiration bioassays. In bare soils, total As and Pb concentrations and water-extractable levels for As, Zn and Cu exceeded the toxicity guidelines. Pollutants responsible for toxicity were different depending on the tested organism, with arsenic being most toxic for lettuce and the metal mixture to soil respiration. Soil properties, such as pH or organic carbon content, are key factors to control metal availability and toxicity in the area. According to our results, there is a risk of pollution to living organisms and the soil quality criteria established in the area should be revised to reduce the risk of toxicity. - Highlights: • 15 years after the Aznalcóllar mine spill residual pollution remains in some areas. • Toxic levels were exceeded for total As and Pb and for soluble As, Zn and Cu. • Metals responsible for soil toxicity are different depending on the tested organism. • pH and organic carbon content reduce metal availability and therefore soil toxicity. • Regulatory guidelines in the area should be revised to reduce the risk of toxicity. - Residual pollution in the Guadiamar Green Corridor remains in some areas after long-term stabilization, with some risk of pollution according to toxicity bioassays.

Pesticide Residues and Bees – A Risk Assessment

Science.gov (United States)

Sanchez-Bayo, Francisco; Goka, Koichi

2014-01-01

Bees are essential pollinators of many plants in natural ecosystems and agricultural crops alike. In recent years the decline and disappearance of bee species in the wild and the collapse of honey bee colonies have concerned ecologists and apiculturalists, who search for causes and solutions to this problem. Whilst biological factors such as viral diseases, mite and parasite infections are undoubtedly involved, it is also evident that pesticides applied to agricultural crops have a negative impact on bees. Most risk assessments have focused on direct acute exposure of bees to agrochemicals from spray drift. However, the large number of pesticide residues found in pollen and honey demand a thorough evaluation of all residual compounds so as to identify those of highest risk to bees. Using data from recent residue surveys and toxicity of pesticides to honey and bumble bees, a comprehensive evaluation of risks under current exposure conditions is presented here. Standard risk assessments are complemented with new approaches that take into account time-cumulative effects over time, especially with dietary exposures. Whilst overall risks appear to be low, our analysis indicates that residues of pyrethroid and neonicotinoid insecticides pose the highest risk by contact exposure of bees with contaminated pollen. However, the synergism of ergosterol inhibiting fungicides with those two classes of insecticides results in much higher risks in spite of the low prevalence of their combined residues. Risks by ingestion of contaminated pollen and honey are of some concern for systemic insecticides, particularly imidacloprid and thiamethoxam, chlorpyrifos and the mixtures of cyhalothrin and ergosterol inhibiting fungicides. More attention should be paid to specific residue mixtures that may result in synergistic toxicity to bees. PMID:24718419

Towards Safe Food Free From Pesticides Residues: Biochemical Changes of Selected Vitamins, Trace Elements and Genotoxicity of Irradiated Dates During Storage

International Nuclear Information System (INIS)

Farag, S.E.A.; Elsawy, KH.M.; Elgammal, M.H.; Hammoud, G.M.; Youssef, M.S.H.

2012-01-01

Decreasing quality of semi-dry dates due to infestation during storage is recorded by many researchers. Low gamma irradiation doses could be considered safe alternative of human toxic chemicals and pesticides. In the present study, semi-dry dates irradiated with different doses of 1, 3, 5 kGy beside non-irradiated samples were stored at 20 degree C and at -18 degree C for nine months. Vitamins E, A and trace elements were determined to check the genotoxicity effect of irradiation at high doses (1, 3, 5, 20 and 30 kGy). Results of high pressure liquid chromatography (HPLC) proved that semi-dry dates contain vitamins A (β-carotene) and E (α-tocopherol) in amounts of 98.78 μg/100 g and 1.818 mg/100 g, respectively, in raw non-irradiated fruits. Degradation of vitamins either naturally during storage or by irradiation was manifested. However, the lowest losses of vitamins were detected at low doses of irradiation (1-3 kGy). Also, trace elements and metals were determined by inductively coupled plasma (ICP) technique. Six trace elements; selenium (Se), zinc (Zn), cupper (Cu), cobalt (Co), chromium (Cr) and nickel (Ni), which are responsible for immunity system were detected in dates with considerable concentrations. Two contaminants heavy metals, lead (Pb) and cadmium (Cd), were detected. All the trace elements were in safe levels and have negligible changes under stress of irradiation and during long storage conditions. The genotoxicity test proved that the increased toxicity of irradiated dates was dose dependant, therefore, the irradiated samples at 1 kGy were safe (near control samples). Consequently, the irradiation at 1 kGy was preferable to be used as an alternative of pesticides in spite of some losses in some bioactive content.

A Large-scale Finite Element Model on Micromechanical Damage and Failure of Carbon Fiber/Epoxy Composites Including Thermal Residual Stress

Science.gov (United States)

Liu, P. F.; Li, X. K.

2018-06-01

The purpose of this paper is to study micromechanical progressive failure properties of carbon fiber/epoxy composites with thermal residual stress by finite element analysis (FEA). Composite microstructures with hexagonal fiber distribution are used for the representative volume element (RVE), where an initial fiber breakage is assumed. Fiber breakage with random fiber strength is predicted using Monte Carlo simulation, progressive matrix damage is predicted by proposing a continuum damage mechanics model and interface failure is simulated using Xu and Needleman's cohesive model. Temperature dependent thermal expansion coefficients for epoxy matrix are used. FEA by developing numerical codes using ANSYS finite element software is divided into two steps: 1. Thermal residual stresses due to mismatch between fiber and matrix are calculated; 2. Longitudinal tensile load is further exerted on the RVE to perform progressive failure analysis of carbon fiber/epoxy composites. Numerical convergence is solved by introducing the viscous damping effect properly. The extended Mori-Tanaka method that considers interface debonding is used to get homogenized mechanical responses of composites. Three main results by FEA are obtained: 1. the real-time matrix cracking, fiber breakage and interface debonding with increasing tensile strain is simulated. 2. the stress concentration coefficients on neighbouring fibers near the initial broken fiber and the axial fiber stress distribution along the broken fiber are predicted, compared with the results using the global and local load-sharing models based on the shear-lag theory. 3. the tensile strength of composite by FEA is compared with those by the shear-lag theory and experiments. Finally, the tensile stress-strain curve of composites by FEA is applied to the progressive failure analysis of composite pressure vessel.

Determination of Heavy and Toxic Trace Elements in Sediments of Qarun Lake Using Instrumental Neutron Activation Analysis Technique

International Nuclear Information System (INIS)

Hamed, A.; Abd EI-Samad, M.; Soliman, N.F.

2011-01-01

An investigation of certain heavy and toxic trace elements in 15 sediment samples from different areas at Qarun Lake was performed by a neutron activation technique using the neutron irradiation facilities of the Second Egyptian Research Reactor (ETRR-2). The samples together with two sets of gold foils (one bare and the other covered with cadmium) and two Standard Reference Materials IAEA (Soil-7) were irradiated at the core of the reactor in two capsules for 8520 seconds, another two capsules each has two sets of gold foils (one bare and the other covered with cadmium) are used to determine the neutron fluxes around the sediment samples. The gamma-rays of nuclides from the irradiated samples were carried out by means of a well calibrated high resolution HPGe detection system. The concentrations of product nuclides containing in the irradiated samples were determined from the peak counting-rates of the prominent gamma-ray lines for the corresponding nuclides using Single External Comparator Method (k 0 -Standardization Method) which called k 0 -NAA technique. The neutron flux ratios (f) in the same radiation sites of the sediment samples bottles were calculated as well as the cadmium ratios (R e d). MS Excel work books were constructed and used in our calculation. The total contents of As , Ba , Ca ,Co, Cr ,Cs, Eu ,Hf ,Hg,Na ,Ru ,Sc ,Se ,Sm ,Sn ,Sr ,Th ,Rb ,Zn ,and Zr in these samples were measured. The objectives .of this study were evaluated to identify the variations of concentration of some elements that have an impact on environmental pollutions. The results indicated that the concentrations of toxic trace elements of Ba, Cr, Se, Sn, Hg, Sin and Zn may represent pollutions problem

Low-residue euthanasia of stranded mysticetes.

Science.gov (United States)

Harms, Craig A; McLellan, William A; Moore, Michael J; Barco, Susan G; Clarke, Elsburgh O; Thayer, Victoria G; Rowles, Teresa K

2014-01-01

Euthanasia of stranded large whales poses logistic, safety, pharmaceutical, delivery, public relations, and disposal challenges. Reasonable arguments may be made for allowing a stranded whale to expire naturally. However, slow cardiovascular collapse from gravitational effects outside of neutral buoyancy, often combined with severely debilitating conditions, motivate humane efforts to end the animal's suffering. The size of the animal and prevailing environmental conditions often pose safety concerns for stranding personnel, which take priority over other considerations. When considering chemical euthanasia, the size of the animal also necessitates large quantities of euthanasia agents. Drug residues are a concern for relay toxicity to scavengers, particularly for pentobarbital-containing euthanasia solutions. Pentobarbital is also an environmental concern because of its stability and long persistence in aquatic environments. We describe a euthanasia technique for stranded mysticetes using readily available, relatively inexpensive, preanesthetic and anesthetic drugs (midazolam, acepromazine, xylazine) followed by saturated KCl delivered via custom-made needles and a low-cost, basic, pressurized canister. This method provides effective euthanasia while moderating personnel exposure to hazardous situations and minimizing drug residues of concern for relay toxicity.

Laboratory studies of the properties of in-situ burn residues: chemical composition of residues

International Nuclear Information System (INIS)

Trudel, B.K.; Buist, I.A.; Schatzke, D.; Aurand, D.

1996-01-01

The chemical composition of the residue from small-scale burns of thick oil slicks was studied. The objective was to describe the changes in chemical composition in oils burning on water and to determine how these changes were influenced by the condition of the burn. Small-scale test burns involved burning 40-cm diameter pools of oil on water. A range of eight oil types including seven crude oils and an automotive diesel were burned. For each oil, slicks of fresh oil of three different thicknesses were tested. Two of the oils were tested before and after weathering. Results showed that the composition of the residue differed greatly from the parent oil. Asphaltenes, high-boiling-point aromatics and resins remained concentrated in the burn residue. The burning of slicks appeared to remove most of the lower-molecular weight aromatic hydrocarbons which included the more toxic and more bioavailable components of the crude oils. 11 refs., 6 tabs

Research on Toxicity Evaluation of Waste Incineration Residues of Printed Circuit Boards

Directory of Open Access Journals (Sweden)

Rasa Volungevičienė

2014-10-01

Full Text Available Recycling waste printed circuit boards (PCB is an extremely complicated process, because PCBs consist of a number of complex components – hazardous and non-hazardous materials sets. Pyrolysis and combustion are currently the most effective treatment technologies for waste printed circuit boards. Pyrolysis can be used for thermally decomposing PCBs allowing for the simultaneous recovery of valuable materials. Following the extraction of valuable materials, the problem of residual ash utilization is encountered. Determining the qualitative and quantitative characteristics of incineration residue helps with choosing effective ash management technologies. This paper analyzes PCB ash generated at three different temperatures of 400 °C, 500 °C and 600 °C. Ash residues have been analysed to determine the quantity and type of metals present. Furthermore, the experiment of leaching heavy metals from ash has been described.

Contamination and ecological risk assessment of toxic trace elements in the Xi River, an urban river of Shenyang city, China.

Science.gov (United States)

Lin, Chunye; He, Mengchang; Liu, Xitao; Guo, Wei; Liu, Shaoqing

2013-05-01

The objectives of this study were to assess the enrichment, contamination, and ecological risk posed by toxic trace elements in the sediments of the Xi River in the industrialized city of Shenyang, China. Surface sediment and sediment core were collected; analyzed for toxic trace elements; and assessed with an index of geoaccumulation (Igeo), enrichment factor (EF) value, potential ecological risk factor (Er), ecological risk index (RI), and probable effect concentration quotient (PECQ). Elemental concentrations (milligram per kilogram) were 8.5-637.9 for As, 6.5-103.9 for Cd, 12.2-21.9 for Co, 90.6-516.0 for Cr, 258.1-1,791.5 for Cu, 2.6-19.0 for Hg, 70.5-174.5 for Ni, 126.9-1,405.8 for Pb, 3.7-260.0 for Sb, 38.4-100.4 for V, and 503-4,929 for Zn. The Igeo, EF, Er, and PECQ indices showed that the contamination of Cd and Hg was more serious than that of As, Cr, Cu, Ni, Pb, Sb, and Zn, whereas the presence of Co and V might be primarily from natural sources. The Igeo index for Cr and Ni might underestimate the degree of contamination, potentially as a result of high concentrations of these elements in the shale. The RI index was higher than 600, indicating a notably high ecological risk of sediment for the river. The average PECQ for As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn ranged from 1.4 to 4.1 for surface sediment and from 5.2 to 9.6 in the sediment cores, indicating a high potential for an adverse biological effect. It was concluded that the sediment in the Xi River was severely contaminated and should be remediated as a hazardous material.

Impact of toxic heavy metals and pesticide residues in herbal products

Directory of Open Access Journals (Sweden)

Nema S. Shaban

2016-03-01

Full Text Available Medicinal plants have a long history of use in therapy throughout the world and still make an important part of traditional medicine. The World Health Organization (WHO estimates that 65%–80% of the world's populations depend on the herbal products as their primary form of health care. This review is conducted to provide a general idea about chemical contaminants such as heavy metals and pesticide residues as major common contaminants of the herbal medicine, which impose serious health risks to human health. Additionally, we aim to provide different analytical methods for analysis of heavy metals and pesticide residues in the herbal medicine.

Speciation in Metal Toxicity and Metal-Based Therapeutics

Directory of Open Access Journals (Sweden)

Douglas M. Templeton

2015-04-01

Full Text Available Metallic elements, ions and compounds produce varying degrees of toxicity in organisms with which they come into contact. Metal speciation is critical to understanding these adverse effects; the adjectives “heavy” and “toxic” are not helpful in describing the biological properties of individual elements, but detailed chemical structures are. As a broad generalization, the metallic form of an element is inert, and the ionic salts are the species that show more significant bioavailability. Yet the salts and other chelates of a metal ion can give rise to quite different toxicities, as exemplified by a range of carcinogenic potential for various nickel species. Another important distinction comes when a metallic element is organified, increasing its lipophilicity and hence its ability to penetrate the blood brain barrier, as is seen, for example, with organic mercury and tin species. Some metallic elements, such as gold and platinum, are themselves useful therapeutic agents in some forms, while other species of the same element can be toxic, thus focusing attention on species interconversions in evaluating metal-based drugs. The therapeutic use of metal-chelating agents introduces new species of the target metal in vivo, and this can affect not only its desired detoxification, but also introduce a potential for further mechanisms of toxicity. Examples of therapeutic iron chelator species are discussed in this context, as well as the more recent aspects of development of chelation therapy for uranium exposure.

The use of sugar and alcohol industry waste in the adsorption of potentially toxic metals.

Science.gov (United States)

Santos, Oseas Silva; Mendonça, André Gustavo Ribeiro; Santos, Josué Carinhanha Caldas; Silva, Amanda Paulina Bezerra; Costa, Silvanio Silverio Lopes; Oliveira, Luciana Camargo; Carmo, Janaina Braga; Botero, Wander Gustavo

2016-01-01

One of the waste products of the industrial process of the sugar and alcohol agribusiness is filter cake (FC). This waste product has high levels of organic matter, mainly proteins and lipids, and is rich in calcium, nitrogen, potassium and phosphorous. In this work we characterized samples of FC from sugar and alcohol industries located in sugarcane-producing regions in Brazil and assessed the adsorption of potentially toxic metals (Cu(II), Cd(II), Pb(II), Ni(II) and Cr(III)) by this waste in mono- and multi-elemental systems, seeking to use FC as an adsorbent in contaminated environments. The characterization of FCs showed significant differences between the samples and the adsorption studies showed retention of over 90% of potentially toxic metals. In a competitive environment (multi-metallic solution), the FC was effective in adsorbing all metals except lead, but less effective compared to the mono-metallic solution. These results show the potential for use of this residue as an adsorbent in contaminated environments.

Toxicidade residual de alguns agrotóxicos recomendado na agricultura sobre Neoseiulus californicus (McGregor (Acari: Phytoseiidae Residual toxicity of some pesticides recommended for citrus orchards on the predaceous mite Neoseiulus californicus (McGregor (Acari: phytoseiidae

Directory of Open Access Journals (Sweden)

Marcos Zatti da Silva

2007-04-01

ão necessários para se compreender melhor o efeito desses agrotóxicos sobre o ácaro predador.This study was carried out to evaluate the residual toxicity of some pesticides used in citrus orchards, on Neoseiulus californicus (McGregor under laboratory conditions. The residual contact bioassay method was adopted. Citrus leaves of the variety "Pêra" were sprayed in a Potter tower. The products' residual toxicity was evaluated at two hours and 1, 3, 5, 7, 10, 14 and 21 days after treatment. Ten adult females of N. californicus were transferred to each arena together with an enough amount of Tetranychus urticae to feed the predator. Mortality evaluations were performed at 72 hours after transferring the predaceous mites to the arenas. The pesticides acrinathrin, deltamethrin, dinocap, sulphur, fenpropathrin, fenbutatin oxide and propargite did not cause significant mortalities to the adults of N. californicus. Abamectim, azocyclotin and cyhexatin caused mortalities of 29.8, 24.0 and 34.1%, respectively, for N. californicus adults exposed to two-hour pesticide residues. Dicofol, pyridaben and chlorfenapyr caused 100% of mortality to the predators exposed to the two-hour acaricide residues. Abamectin provoked significant mortalities for a period shorter than one day. Residues of azocyclotin, cyhexatin, dicofol, pyridaben and chlorfenapyr caused significant mortalities for periods of 1, 1, 10, 10 and 21 days, respectively. The results of this study provided basic information for choosing the adequate pesticides to be used in citrus orchards in which N. californicus is present, or in those the predator will be released. The results are also useful for the decision of the best releasing time for N. californicus in the field, after pesticide applications. Studies carried out in the field are still necessary to understand better the effect of these pesticides under the predaceous mite.

Biological treatment of concentrated hazardous, toxic, andradionuclide mixed wastes without dilution

Energy Technology Data Exchange (ETDEWEB)

Stringfellow, William T.; Komada, Tatsuyuki; Chang, Li-Yang

2004-06-15

Approximately 10 percent of all radioactive wastes produced in the U. S. are mixed with hazardous or toxic chemicals and therefore can not be placed in secure land disposal facilities. Mixed wastes containing hazardous organic chemicals are often incinerated, but volatile radioactive elements are released directly into the biosphere. Some mixed wastes do not currently have any identified disposal option and are stored locally awaiting new developments. Biological treatment has been proposed as a potentially safer alternative to incineration for the treatment of hazardous organic mixed wastes, since biological treatment would not release volatile radioisotopes and the residual low-level radioactive waste would no longer be restricted from land disposal. Prior studies have shown that toxicity associated with acetonitrile is a significant limiting factor for the application of biotreatment to mixed wastes and excessive dilution was required to avoid inhibition of biological treatment. In this study, we demonstrate that a novel reactor configuration, where the concentrated toxic waste is drip-fed into a complete-mix bioreactor containing a pre-concentrated active microbial population, can be used to treat a surrogate acetonitrile mixed waste stream without excessive dilution. Using a drip-feed bioreactor, we were able to treat a 90,000 mg/L acetonitrile solution to less than 0.1 mg/L final concentration using a dilution factor of only 3.4. It was determined that the acetonitrile degradation reaction was inhibited at a pH above 7.2 and that the reactor could be modeled using conventional kinetic and mass balance approaches. Using a drip-feed reactor configuration addresses a major limiting factor (toxic inhibition) for the biological treatment of toxic, hazardous, or radioactive mixed wastes and suggests that drip-feed bioreactors could be used to treat other concentrated toxic waste streams, such as chemical warfare materiel.

Arsenic, Chromium, and Other Potentially Toxic Elements in the Rocks and Sediments of Oropos-Kalamos Basin, Attica, Greece

Directory of Open Access Journals (Sweden)

D. Alexakis

2014-01-01

Full Text Available Rocks and sediments are non-anthropogenic sources of elements contamination. In this study, a series of potentially toxic elements were quantified in rocks and sediments of the Oropos-Kalamos basin. Only As, Hg, Pb, and Sb contents, in all the examined rocks and sediments, were higher than the levels given in international literature. Concentration of the elements As, Cr, Hg, Mo, Ni, and U is highly elevated in the lignite compared to crustal element averages. The enrichment of Cr and Ni in the lignite can be attributed to the known ultramafic rock masses surrounding the basin, while enrichment of As, Hg, Mo, Sb, and U is associated with the past geothermal activity of the Upper Miocene (about 15 million years ago. Nickel and Cr were transported into the lignite deposition basin by rivers and streams draining ultramafic rock bodies. The results of this study imply the natural source of Cr3+ and Cr6+ contamination of the Oropos-Kalamos groundwater, since high Cr contents were also recorded in the lignite (212.3 mg kg−1, chromiferous iron ore occurrences (256.6 mg kg−1, and alluvial deposits (212.5 mg kg−1, indicating Cr leaching and transportation to the depositional basin dating from the Upper Miocene age.

Environmental insecticide residues from tsetse fly control measures in Uganda

International Nuclear Information System (INIS)

Sserunjoji-Sebalija, J.

1976-01-01

Up to June 1974 areas in Uganda totalling 8600km 2 have been successfully reclaimed from tsetse fly infestation by ground spray of 3% dieldrin water emulsions. A search for equally effective but less persistent and toxic compounds against tsetse flies has been unsuccessful. Fourteen insecticide formulations have been tested for their persistence on tree bark surfaces and, therefore, their availability and toxicity to the target tsetse flies. Only those compounds with a high immediate insecticidal activity (some higher than dieldrin) like endosulfan, Chlorfenvinphos and propoxur could merit further consideration in tsetse control. While some were toxic to tsetse as fresh deposits, they lacked sufficient persistence. A study of the environmental implication from the continued use of the highly persistent and toxic dieldrin has provided useful data on residues likely to be found both in terrestrial and aquatic fauna and flora. These are generally low. Moreover, there is evidence of degradation in some fish species (Protopterus aethiopicus and Clarias). Also, dilution factors and adsorption involving the muddy nature of water run-off, etc., and controlled burning of grasses after tsetse eradication would tend to inactivate the residual insecticide and protect aquatic systems. The general findings have indicated less risk than anticipated of the environmental contamination from tsetse control by application of persistent and toxic insecticides. (author)

Analysis of toxic elements in two pigeonpea (Cajanus cajan (L.) Millsp) cultivars, in fertilized soils, by neutron activation

International Nuclear Information System (INIS)

Piasentin, Ricardo M.; Armelin, Maria Jose A.; Primavesi, Odo

2000-01-01

Samples of whole leaves, from thirty-six plants belonging to two pigeonpea cultivars were analysed by Instrumental Neutron Activation Analysis. Each plant was cultivated under either single dose or double one of some mineral fertilizers, such as, B, Co, Cu, Fe, Mn, Mo, V and Zn, individually, to the soil; besides limestone and phosphorus. The aim of this paper is to evaluate the contribution of these treatments to the increase in the concentrations of As, Sb, Th and U, since these elements can be toxic to plants and animals. (author)

Finite element modeling to determine thermal residual strain distribution of bonded composite repairs for structural health monitoring design

Science.gov (United States)

Baker, Wayne; Jones, Rhys; Davis, Claire; Galea, Stephen C.

2002-11-01

The economic implication of fleet upgrades, particularly in Australia with military aircraft such as the F-111 and F/A-18, has led to an increasing reliance on composite repair technology to address fatigue and corrosion-affected aircraft components. The increasing use of such repairs has led to a research effort to develop various in-situ health monitoring systems that may be incorporated with a repair. This paper reports on the development of a theoretical methodology that uses finite element analysis (FEA) to model the strain profiles which optical sensors, on or within the patch, will be exposed to under various operational scenarios, including load and disbond. Numerical techniques are then used to predict the fibre Bragg grating (FBG) reflections which occur with these strain profiles. The quality of these reflection are a key consideration when designing FBG based structural health monitoring (SHM) systems. This information can be used to optimise the location of both surface mounted, and embedded sensors, and determine feasibility of SHM system design. Research was conducted into the thermal residual strain (TRS) within the patch. A finite element study revealed the presence of significant thermal residual strain gradients along the surface of the tapered region of the patch. As Bragg gratings are particularly sensitive to strain gradients, (producing a result similar to a chirped grating) the strain gradient on the composite at potential sensor locations both under load, and in the event of disbond was considered. A sufficiently high gradient leads to an altered Bragg reflection. These spurious reflections need to be considered, and theoretically obtained reflections can provide information to allow for load scenarios where the Bragg shift is not a smooth, well defined peak. It can also be shown that embedded fibres offer a higher average thermal residual strain reading, while being subject to a much lower strain gradient. This particularly favors the

Radiochemical neutron activation analysis for trace elements of basic ingredients of pan

International Nuclear Information System (INIS)

Zaidi, J.H.; Arif, M.; Fatima, I; Qureshi, I.H.

2002-01-01

Extensive use of pan, by one-tenth of world's population, entails the evaluation of trace element contents in its ingredients. Radiochemical neutron activation analysis (RNAA) was developed and successfully employed to determine the concentration of 36 trace elements (essential, toxic and nonessential) in its four basic ingredients, leaf of betel pepper, betel nut, catechu and lime. The radiochemical separation methodology has significantly improved the detection limits of most of these elements due to suppression of Compton background. Base-line values of certain toxic and essential elements in these ingredients is provided. The daily intake of essential and toxic elements through pan was estimated and compared with the recommended values. The cumulative intake of Mn is four times higher than the recommended value and that of toxic elements is well below the tolerance limits. (author)

Essential and toxic element concentrations in blood and urine and their associations with diet: Results from a Norwegian population study including high-consumers of seafood and game

Energy Technology Data Exchange (ETDEWEB)

Birgisdottir, B.E.; Knutsen, H.K.; Haugen, M.; Gjelstad, I.M. [Division of Environmental Medicine, Norwegian Institute of Public Health, Oslo (Norway); Jenssen, M.T.S. [Norwegian Institute for Water Research, Oslo (Norway); Ellingsen, D.G.; Thomassen, Y. [National Institute of Occupational Health, Oslo (Norway); Alexander, J. [Office of the Director-General, Norwegian Institute of Public Health, Oslo (Norway); Meltzer, H.M. [Division of Environmental Medicine, Norwegian Institute of Public Health, Oslo (Norway); Brantsæter, A.L., E-mail: Anne.Lise.Brantsaeter@fhi.no [Division of Environmental Medicine, Norwegian Institute of Public Health, Oslo (Norway)

2013-10-01

The first aim of the study was to evaluate calculated dietary intake and concentrations measured in blood or urine of essential and toxic elements in relation to nutritional and toxicological reference values. The second aim was to identify patterns of the element concentrations in blood and urine and to identify possible dietary determinants of the concentrations of these elements. Adults with a known high consumption of environmental contaminants (n = 111), and a random sample of controls (n = 76) answered a validated food frequency questionnaire (FFQ). Complete data on biological measures were available for 179 individuals. Blood and urine samples were analyzed for selenium, iodine, arsenic, mercury, cadmium and lead. Principal component analysis was used to identify underlying patterns of correlated blood and urine concentrations. The calculated intakes of selenium, iodine, inorganic arsenic and mercury were within guideline levels. For cadmium 24% of the high consumer group and 8% of the control group had intakes above the tolerable weekly intake. Concentrations of lead in blood exceeded the bench-mark dose lower confidence limits for some participants. However, overall, the examined exposures did not give rise to nutritional or toxicological concerns. Game consumption was associated with lead in blood (B{sub ln} 0.021; 95%CI:0.010, 0.031) and wine consumption. Seafood consumption was associated with urinary cadmium in non-smokers (B{sub ln} 0.009; 95%CI:0.003, 0.015). A novel finding was a distinct pattern of positively associated biological markers, comprising iodine, selenium, arsenic and mercury (eigenvalue 3.8), reflecting seafood intake (B 0.007; 95%CI:0.004, 0.010). The study clearly demonstrates the significance of seafood as a source of both essential nutrients and toxic elements simultaneously and shows that exposure to various essential and toxic elements can be intertwined. - Highlights: • A study on interplay and sources of six different

Essential and toxic element concentrations in blood and urine and their associations with diet: Results from a Norwegian population study including high-consumers of seafood and game

International Nuclear Information System (INIS)

Birgisdottir, B.E.; Knutsen, H.K.; Haugen, M.; Gjelstad, I.M.; Jenssen, M.T.S.; Ellingsen, D.G.; Thomassen, Y.; Alexander, J.; Meltzer, H.M.; Brantsæter, A.L.

2013-01-01

The first aim of the study was to evaluate calculated dietary intake and concentrations measured in blood or urine of essential and toxic elements in relation to nutritional and toxicological reference values. The second aim was to identify patterns of the element concentrations in blood and urine and to identify possible dietary determinants of the concentrations of these elements. Adults with a known high consumption of environmental contaminants (n = 111), and a random sample of controls (n = 76) answered a validated food frequency questionnaire (FFQ). Complete data on biological measures were available for 179 individuals. Blood and urine samples were analyzed for selenium, iodine, arsenic, mercury, cadmium and lead. Principal component analysis was used to identify underlying patterns of correlated blood and urine concentrations. The calculated intakes of selenium, iodine, inorganic arsenic and mercury were within guideline levels. For cadmium 24% of the high consumer group and 8% of the control group had intakes above the tolerable weekly intake. Concentrations of lead in blood exceeded the bench-mark dose lower confidence limits for some participants. However, overall, the examined exposures did not give rise to nutritional or toxicological concerns. Game consumption was associated with lead in blood (B ln 0.021; 95%CI:0.010, 0.031) and wine consumption. Seafood consumption was associated with urinary cadmium in non-smokers (B ln 0.009; 95%CI:0.003, 0.015). A novel finding was a distinct pattern of positively associated biological markers, comprising iodine, selenium, arsenic and mercury (eigenvalue 3.8), reflecting seafood intake (B 0.007; 95%CI:0.004, 0.010). The study clearly demonstrates the significance of seafood as a source of both essential nutrients and toxic elements simultaneously and shows that exposure to various essential and toxic elements can be intertwined. - Highlights: • A study on interplay and sources of six different elements • The

Essential and toxic element concentrations in blood and urine and their associations with diet: results from a Norwegian population study including high-consumers of seafood and game.

Science.gov (United States)

Birgisdottir, B E; Knutsen, H K; Haugen, M; Gjelstad, I M; Jenssen, M T S; Ellingsen, D G; Thomassen, Y; Alexander, J; Meltzer, H M; Brantsæter, A L

2013-10-01

The first aim of the study was to evaluate calculated dietary intake and concentrations measured in blood or urine of essential and toxic elements in relation to nutritional and toxicological reference values. The second aim was to identify patterns of the element concentrations in blood and urine and to identify possible dietary determinants of the concentrations of these elements. Adults with a known high consumption of environmental contaminants (n=111), and a random sample of controls (n=76) answered a validated food frequency questionnaire (FFQ). Complete data on biological measures were available for 179 individuals. Blood and urine samples were analyzed for selenium, iodine, arsenic, mercury, cadmium and lead. Principal component analysis was used to identify underlying patterns of correlated blood and urine concentrations. The calculated intakes of selenium, iodine, inorganic arsenic and mercury were within guideline levels. For cadmium 24% of the high consumer group and 8% of the control group had intakes above the tolerable weekly intake. Concentrations of lead in blood exceeded the bench-mark dose lower confidence limits for some participants. However, overall, the examined exposures did not give rise to nutritional or toxicological concerns. Game consumption was associated with lead in blood (B(ln) 0.021; 95%CI:0.010, 0.031) and wine consumption. Seafood consumption was associated with urinary cadmium in non-smokers (B(ln) 0.009; 95%CI:0.003, 0.015). A novel finding was a distinct pattern of positively associated biological markers, comprising iodine, selenium, arsenic and mercury (eigenvalue 3.8), reflecting seafood intake (B 0.007; 95%CI:0.004, 0.010). The study clearly demonstrates the significance of seafood as a source of both essential nutrients and toxic elements simultaneously and shows that exposure to various essential and toxic elements can be intertwined. © 2013 Elsevier B.V. All rights reserved.

Distribution of 19 organochlorinated pesticides residues in ginseng ...

African Journals Online (AJOL)

The organochlorinated pesticides widely applied and still remains in soils, has become toxic to ginseng production in Jilin Province. In this study, 19 trace organochlorinated pesticide residues in five types of ginseng products and soil samples from four ginseng production areas were analyzed using a gas ...

Standardized Total Average Toxicity Score: A Scale- and Grade-Independent Measure of Late Radiotherapy Toxicity to Facilitate Pooling of Data From Different Studies

Energy Technology Data Exchange (ETDEWEB)

Barnett, Gillian C., E-mail: gillbarnett@doctors.org.uk [University of Cambridge Department of Oncology, Oncology Centre, Cambridge (United Kingdom); Cancer Research-UK Centre for Genetic Epidemiology and Department of Oncology, Strangeways Research Laboratories, Cambridge (United Kingdom); West, Catharine M.L. [School of Cancer and Enabling Sciences, Manchester Academic Health Science Centre, University of Manchester, Christie Hospital, Manchester (United Kingdom); Coles, Charlotte E. [University of Cambridge Department of Oncology, Oncology Centre, Cambridge (United Kingdom); Pharoah, Paul D.P. [Cancer Research-UK Centre for Genetic Epidemiology and Department of Oncology, Strangeways Research Laboratories, Cambridge (United Kingdom); Talbot, Christopher J. [Department of Genetics, University of Leicester, Leicester (United Kingdom); Elliott, Rebecca M. [School of Cancer and Enabling Sciences, Manchester Academic Health Science Centre, University of Manchester, Christie Hospital, Manchester (United Kingdom); Tanteles, George A. [Department of Clinical Genetics, University Hospitals of Leicester, Leicester (United Kingdom); Symonds, R. Paul [Department of Cancer Studies and Molecular Medicine, University Hospitals of Leicester, Leicester (United Kingdom); Wilkinson, Jennifer S. [University of Cambridge Department of Oncology, Oncology Centre, Cambridge (United Kingdom); Dunning, Alison M. [Cancer Research-UK Centre for Genetic Epidemiology and Department of Oncology, Strangeways Research Laboratories, Cambridge (United Kingdom); Burnet, Neil G. [University of Cambridge Department of Oncology, Oncology Centre, Cambridge (United Kingdom); Bentzen, Soren M. [University of Wisconsin, School of Medicine and Public Health, Department of Human Oncology, Madison, WI (United States)

2012-03-01

Purpose: The search for clinical and biologic biomarkers associated with late radiotherapy toxicity is hindered by the use of multiple and different endpoints from a variety of scoring systems, hampering comparisons across studies and pooling of data. We propose a novel metric, the Standardized Total Average Toxicity (STAT) score, to try to overcome these difficulties. Methods and Materials: STAT scores were derived for 1010 patients from the Cambridge breast intensity-modulated radiotherapy trial and 493 women from University Hospitals of Leicester. The sensitivity of the STAT score to detect differences between patient groups, stratified by factors known to influence late toxicity, was compared with that of individual endpoints. Analysis of residuals was used to quantify the effect of these covariates. Results: In the Cambridge cohort, STAT scores detected differences (p < 0.00005) between patients attributable to breast volume, surgical specimen weight, dosimetry, acute toxicity, radiation boost to tumor bed, postoperative infection, and smoking (p < 0.0002), with no loss of sensitivity over individual toxicity endpoints. Diabetes (p = 0.017), poor postoperative surgical cosmesis (p = 0.0036), use of chemotherapy (p = 0.0054), and increasing age (p = 0.041) were also associated with increased STAT score. When the Cambridge and Leicester datasets were combined, STAT was associated with smoking status (p < 0.00005), diabetes (p = 0.041), chemotherapy (p = 0.0008), and radiotherapy boost (p = 0.0001). STAT was independent of the toxicity scale used and was able to deal with missing data. There were correlations between residuals of the STAT score obtained using different toxicity scales (r > 0.86, p < 0.00005 for both datasets). Conclusions: The STAT score may be used to facilitate the analysis of overall late radiation toxicity, from multiple trials or centers, in studies of possible genetic and nongenetic determinants of radiotherapy toxicity.

Recycling crop residues for use in recirculating hydroponic crop production

Science.gov (United States)

Mackowiak, C. L.; Garland, J. L.; Sager, J. C.

1996-01-01

As part of bioregenerative life support feasibility testing by NASA, crop residues are being used to resupply elemental nutrients to recirculating hydroponic crop production systems. Methods for recovering nutrients from crop residues have evolved from water soaking (leaching) to rapid aerobic bioreactor processing. Leaching residues recovered the majority of elements but it also recovered significant amounts of soluble organics. The high organic content of leachates was detrimental to plant growth. Aerobic bioreactor processing reduced the organic content ten-fold, which reduced or eliminated phytotoxic effects. Wheat and potato production studies were successful using effluents from reactors having with 8- to 1-day retention times. Aerobic bioreactor effluents supplied at least half of the crops elemental mass needs in these studies. Descriptions of leachate and effluent mineral content, biomass productivity, microbial activity, and nutrient budgets for potato and wheat are presented.

Toxic element mobility assessment and modeling for regional geo-scientific survey to support Risk Assessment in a European Union context

Science.gov (United States)

Abdaal, Ahmed; Jordan, Gyozo; Bartha, Andras; Fugedi, Ubul

2013-04-01

The Mine Waste Directive 2006/21/EC requires the risk-based inventory of all mine waste sites in Europe. The geochemical documentation concerning inert classification and ranking of the mine wastes requires detailed field study and laboratory testing and analyses of waste material to assess the Acid Mine Drainage potential and toxic element mobility. The procedure applied in this study used a multi-level decision support scheme including: 1) expert judgment, 2) data review, 3) representative field sampling and laboratory analysis of formations listed in the Inert Mining Waste List, and 4) requesting available laboratory analysis data from selected operating mines. Based on expert judgment, the listed formations were classified into three categories. A: inert B: probably inert, but has to be checked, C: probably not inert, has to be examined. This paper discusses the heavy metal contamination risk assessment (RA) in leached quarry-mine waste sites in Hungary. In total 34 mine waste sites (including tailing lagoons and heaps of both abandoned mines and active quarries) have been selected for scientific testing using the EU Pre-selection Protocol. Over 93 field samples have been collected from the mine sites including Ore (Andesite and Ryolite), Coal (Lignite, black and brown coals), Peat, Alginite, Bauxite, Clay and Limestone. Laboratory analyses of the total toxic element content (aqua regia extraction), the mobile toxic element content (deionized water leaching) and the analysis of different forms of sulfur (sulfuric acid potential) ) on the base of Hungarian GKM Decree No. 14/2008. (IV. 3) concerning mining waste management. A detailed geochemical study together with spatial analysis and GIS has been performed to derive a geochemically sound contamination RA of the mine waste sites. Key parameters such as heavy metal and sulphur content, in addition to the distance to the nearest surface and ground water bodies, or to sensitive receptors such as settlements and

Reduced Toxicity Fuel Satellite Propulsion System Including Fuel Cell Reformer with Alcohols Such as Methanol

Science.gov (United States)

Schneider, Steven J. (Inventor)

2001-01-01

A reduced toxicity fuel satellite propulsion system including a reduced toxicity propellant supply for consumption in an axial class thruster and an ACS class thruster. The system includes suitable valves and conduits for supplying the reduced toxicity propellant to the ACS decomposing element of an ACS thruster. The ACS decomposing element is operative to decompose the reduced toxicity propellant into hot propulsive gases. In addition the system includes suitable valves and conduits for supplying the reduced toxicity propellant to an axial decomposing element of the axial thruster. The axial decomposing element is operative to decompose the reduced toxicity propellant into hot gases. The system further includes suitable valves and conduits for supplying a second propellant to a combustion chamber of the axial thruster, whereby the hot gases and the second propellant auto-ignite and begin the combustion process for producing thrust.

Endrin in birds: Lethal residues and secondary poisoning

Science.gov (United States)

Stickel, W.H.; Reichel, W.L.; Hughes, D.L.

1979-01-01

Endrin residues in brains that are diagnostic of death were determined for several species of birds. Residues of 0.8 ppm or more of endrin in brain meant death; 0.6 ppm or less meant survival; between was a zone of overlap. These criteria indicate that some wild birds of the U.S., particularly white pelicans in the Northwest and two bald eagles, have been killed by endrin. Signs of endrin poisoning in experimental birds are described. The important and highly toxic metabolite in rodents, 12-ketoendrin, was sought but not found.

Effect of the weld groove shape and pass number on residual stresses in butt-welded pipes

International Nuclear Information System (INIS)

Sattari-Far, I.; Farahani, M.R.

2009-01-01

This study used finite element techniques to analyze the thermo-mechanical behaviour and residual stresses in butt-welded pipes. The residual stresses were also measured in some welds by using the Hole-Drilling method. The results of the finite element analysis were compared with experimentally measured data to evaluate the accuracy of the finite element modelling. Based on this study, a finite element modelling procedure with reasonable accuracy was developed. The developed FE modelling was used to study the effects of weld groove shape and weld pass number on welding residual stresses in butt-welded pipes. The hoop and axial residual stresses in pipe joints of 6 and 10 mm thickness of different groove shapes and pass number were studied. It is shown that these two parameters may have significant effects on magnitude and distribution of residual stresses in welded pipes.

Biological treatment of concentrated hazardous, toxic, and radionuclide mixed wastes without dilution

International Nuclear Information System (INIS)

Stringfellow, William T.; Komada, Tatsuyuki; Chang, Li-Yang

2004-01-01

Approximately 10 percent of all radioactive wastes produced in the U. S. are mixed with hazardous or toxic chemicals and therefore can not be placed in secure land disposal facilities. Mixed wastes containing hazardous organic chemicals are often incinerated, but volatile radioactive elements are released directly into the biosphere. Some mixed wastes do not currently have any identified disposal option and are stored locally awaiting new developments. Biological treatment has been proposed as a potentially safer alternative to incineration for the treatment of hazardous organic mixed wastes, since biological treatment would not release volatile radioisotopes and the residual low-level radioactive waste would no longer be restricted from land disposal. Prior studies have shown that toxicity associated with acetonitrile is a significant limiting factor for the application of biotreatment to mixed wastes and excessive dilution was required to avoid inhibition of biological treatment. In this study, we demonstrate that a novel reactor configuration, where the concentrated toxic waste is drip-fed into a complete-mix bioreactor containing a pre-concentrated active microbial population, can be used to treat a surrogate acetonitrile mixed waste stream without excessive dilution. Using a drip-feed bioreactor, we were able to treat a 90,000 mg/L acetonitrile solution to less than 0.1 mg/L final concentration using a dilution factor of only 3.4. It was determined that the acetonitrile degradation reaction was inhibited at a pH above 7.2 and that the reactor could be modeled using conventional kinetic and mass balance approaches. Using a drip-feed reactor configuration addresses a major limiting factor (toxic inhibition) for the biological treatment of toxic, hazardous, or radioactive mixed wastes and suggests that drip-feed bioreactors could be used to treat other concentrated toxic waste streams, such as chemical warfare materiel

The use of hogdahl convention k0 neutron activation analysis (NAA) standardization method and atomic absortion spectroscopy (ASS) for determination of toxic elements in foodstuffs

International Nuclear Information System (INIS)

Ahiamadie, H.

2008-06-01

Copper, cadmium, tin, chromium, arsenic, antimony, vanadium and mercury contents were determined in various foodstuffs (Mussa paradisiaca (plantains), Manihot esculentus (cassavas), Vantosoma sagittifolium (cocoyam). Vantosoma sagittifolium leaves (kontomire), Lycopersicum esculentus (tomatoes), Capsicum species (peppers), Solanum melongena (garden eggs), Nbelmoschus esculentus (okro), and Colocasia esculenta (kooko or taro)) produced in the Wassa West District, Ghana. These plants are the basis of human nutrition in the study area. These elements were determined using Hogdahl convention k 0 Instrumental Neutron Activation Analysis (NAA) Standardization Method and Atomic Absorption Spectroscopy (AAS). The elements in the various foodstuffs and their concentration ranges were Cu (16.87-180.06) mg/kg, As (2.68-9.84) µg/g, Cd (0.63-5.64) µg/g, Hg (0.01-67) ng/g, Cr (0.03-3.66) µg/g, Sb (1.1- 18.6) ng/g, Sn (3.4-58.4) ng/g, and V (12-99) ng/g. The study showed that there are high levels of toxic elements in the foodstuffs grown in the mining areas as compared to that of the non-mining area (i.e., control area). This could be attributed to gold mines pollution. Compared to the World Health Organization (WHO) permissible levels of toxic elements in foods, Cu, Cr and Hg were above the permissible levels whereas the concentrations of As, Cd. Sb, Sn and V fall within the permissible levels. (au)

Determination of nutrients and potentially toxic elements in Jatropha curcas seeds, oil and biodiesel using inductively coupled plasma mass spectrometry

International Nuclear Information System (INIS)

Maciel, P.B.; Barros de, L.L.S.; Duarte, E.C.M.; Harder, M.N.C.; Abreu, Jr.C.H.; Villanueva, F.C.A.

2013-01-01

Biodiesel is a renewable and biodegradable fuel that can be used in diesel engines as a replacement for fossil diesel. A suitable alternative is to produce it from Jatropha curcas, which has high quality oil concentration. Nevertheless, the presence of particular chemical elements above certain limits can affect the product quality, leading to vehicle engine problems and acting as air pollution source. The objective of this work is to develop a method for the simultaneous determination of B, Na, Mg, P, S, K, Ca, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, Ba, and Pb in J. curcas seeds, oil and biodiesel using the inductively coupled plasma mass spectrometry (ICP-MS) technique. This material was evaluated because has been successfully employed in India for biodiesel production as well as in other places where there is an incentive to family farming, without affect the food chain. The oil was obtained from seeds via mechanical extraction and the biodiesel was achieved by oil transesterification. After optimization of the microwave digestion method for the different sample types, the samples were analyzed by ICP-MS. The certified reference material NIST SRM 1515 (apple leaves) and the recovery tests were carried out to ensure the accuracy of the proposed method, which made possible the quantification of several nutrients and potentially toxic elements in J. curcas seeds, oil and biodiesel, especially Na, K, Ca, Mg, P and S in biodiesel which are mandatory analyzed by Petroleum, Natural Gas and Biofuel National Agency (ANP). This work highlights the findings of the first study of potentially toxic and nutrient elements in the production chain steps seed-oil-biodiesel from J. curcas. (author)

Development of irradiation technique on controlling food contamination residue

International Nuclear Information System (INIS)

Liu Bin; Xiong Shanbai; Xiong Guangquan; Cheng Wei; Chen Yuxia; Liao Tao; Li Xin; Lin Ruotai

2010-01-01

The current state of the researches of irradiation technology on controlling food mycotoxin, pesticide, veterinary drugs and fishery drugs residue was summarized. And the degradation rate, mechanism, products and toxicities of food contamination were expatiated. The free radical from irradiation attack the site of weaker bond, and the less or more toxic substances were produced, which lead to the degradation of the food contamination. The limitations and future application of irradiation technique on controlling food contamination were also analyzed. (authors)

Dietary Intakes of Minerals, Essential and Toxic Trace Elements for Adults from Eragrostis tef L.: A Nutritional Assessment

Directory of Open Access Journals (Sweden)

Eva Koubová

2018-04-01

Full Text Available This study analysed the contents of thirty-six mineral and trace elements in teff (Eragrostis tef L. grains. What is more, dietary intakes were calculated. Inductively coupled plasma mass spectrometry (ICP-MS was used to assess mineral and trace element contents. Consequently, the appropriate Recommended Dietary Allowance (RDA or adequate intake (AI, and provisional tolerable weekly intake (PTWI or provisional tolerable monthly intake (PTMI values for adults were determined according to the Food and Agriculture Organization/World Health Organization (FAO/WHO and Institute of Medicine (IOM regulations. Teff is a significant contributor to RDAs and AIs for females in the following order: Mn > Cu > Zn ≥ Mg > Fe ≥ P and Ca. For males, teff contributes in the order, Mn > Cu > Fe > Zn ≥ P ≥ Mg > and Ca. The concentration of arsenic (65.9 µg/kg in brown teff originating in Bolivia exceeded the average acceptable value set by Reg. No. 1881 of 6–50 µg/kg in cereals consumed in the EU. The PTWIs or PTMIs for Al, Cd, Sn and Hg were all under 7%, which is below the limits of toxic element intake related to the body weight of 65 kg for adult females and 80 kg for males, set by the FAO/WHO. Teff grains can be recommended as a valuable and safe source of minerals and trace elements.

A high throughput passive dosing format for the Fish Embryo Acute Toxicity test

DEFF Research Database (Denmark)

Vergauwen, Lucia; Nørgaard Schmidt, Stine; Stinckens, Evelyn

2015-01-01

(lethal chemical activity) was 0.047. All values were within ranges expected for baseline toxicity. Impaired swim bladder inflation was the most pronounced morphological effect and swimming activity was reduced in all exposure concentrations. Further analysis showed that the effect on swimming activity...... dilution series. We report effect values for both mortality and sublethal morphological effects based on (1) measured exposure concentrations, (2) (lipid normalized) body residues and (3) chemical activity. The LC50 for 120 hpf was 310 μg/L, CBR50 (critical body residue) was 2.72 mmol/kg fresh wt and La50...... for obtaining mechanistic toxicity information, and (3) cause no toxicity, demonstrating its potential as an extension of the FET test when testing hydrophobic chemicals....

Residual stress effects on the K parameter of the fracture mechanics

International Nuclear Information System (INIS)

Soares, Maria da Conceiccao B. Vieira; Andrade, Arnaldo H. Paes de

1996-01-01

Compressive residual stresses are beneficial and improve resistance to fracture and crack growth. Residual stresses can be introduced in fabricated components by a variety of means and a number of methods such as laser surface treatment, cold expanded hole, and shot peening. Neutrons diffraction measurements of residual stress were performed at a pulsed neutron source (ISIS, Didcot, UK), on shot peened plates of nickel base superalloy Udimet 720 and titanium alloy IMI 834. The stress intensity factor (K) of residual stress was evaluated by finite element modeling and weight function method. Finite element modeling of a 2D plate with a single edge-notch was applied and, due to symmetry only half of the plate was actually modeled. The stress intensity factor (K) was evaluated for both case of remote tension stress and residual stress. Crack surface overlapping, which is physically unacceptable, was noted for small cracks under residual and boundary lading. Overlap correction was proposed and applied in order to obtain reliable values for (K). (author)

Air toxics from heavy oil production and consumption

International Nuclear Information System (INIS)

Lipfert, F.W.; DePhillips, M.P.; Moskowitz, P.D.

1992-01-01

This report assesses the potential impact of recent Federal and state regulations for airborne toxic substances on the production and consumption of heavy fuel oils. Emissions of nickel from heavy oil production in California are considered in some detail, in conjunction with California state regulations for toxic emissions. Although the use of thermal energy from heavy crude oils could in theory be impacted by toxic air pollution regulations, recent trends towards the use of natural gas for the required extraction energy appear to provide substantial relief, in addition to reducing emissions of criteria air pollutants. However, the consumption of residual fuel oils containing toxic metals could result in higher population exposures to these substances and their attendant risks may be worthy of more detailed analysis

Effect of long-term equilibration on the toxicity of molybdenum to soil organisms

International Nuclear Information System (INIS)

Gestel, Cornelis A.M. van; McGrath, Steve P.; Smolders, Erik; Diez Ortiz, Maria; Borgman, Eef; Verweij, Rudo A.; Buekers, Jurgen; Oorts, Koen

2012-01-01

To determine if long-term equilibration may alleviate molybdenum toxicity, earthworms, enchytraeids, collembolans and four plant species were exposed to three soils freshly spiked with Na 2 MoO 4 .2H 2 O and equilibrated for 6 or 11 months in the field with free drainage. Total Mo concentrations in soil decreased by leaching, most (up to 98%) in sandy soil and less (54–62%) in silty and clayey soils. Changes in residual Mo toxicity with time were inconclusive in sandy soil. In the other two soils, toxicity of residual total Mo was significantly reduced after 11 months equilibration with a median 5.5-fold increase in ED50s. Mo fixation in soil, i.e. the decrease of soil solution Mo concentrations at equivalent residual total soil Mo, was maximally a factor of 2.1 only. This experiment shows natural attenuation of molybdate ecotoxicity under field conditions is related to leaching of excess Mo and other ions as well as to slow ageing reactions. - Highlights: ► Three molybdate-spiked soils were equilibrated for 6 and 11 months outdoors. ► Mo chronic toxicity to earthworms, enchytraeids, Collembola and four plant species was assessed. ► Mo concentrations in all soils decreased due to leaching. ► Based on actual total Mo remaining in the soil, Mo toxicity decreased by a median factor of 5.5. ► Decreased Mo toxicity was due to leaching as well as slow ageing reactions. - Natural attenuation under field conditions is more related to leaching of excess molybdate than to slow ageing reactions

Rapid Colorimetric Detection of Cartap Residues by AgNP Sensor with Magnetic Molecularly Imprinted Microspheres as Recognition Elements

Directory of Open Access Journals (Sweden)

Mao Wu

2018-06-01

Full Text Available The overuse of cartap in tea tree leads to hazardous residues threatening human health. A colorimetric determination was established to detect cartap residues in tea beverages by silver nanoparticles (AgNP sensor with magnetic molecularly imprinted polymeric microspheres (Fe3O4@mSiO2@MIPs as recognition elements. Using Fe3O4 as supporting core, mesoporous SiO2 as intermediate shell, methylacrylic acid as functional monomer, and cartap as template, Fe3O4@mSiO2@MIPs were prepared to selectively and magnetically separate cartap from tea solution before colorimetric determination by AgNP sensors. The core-shell Fe3O4@mSiO2@MIPs were also characterized by FT-IR, TEM, VSM, and experimental adsorption. The Fe3O4@mSiO2@MIPs could be rapidly separated by an external magnet in 10 s with good reusability (maintained 95.2% through 10 cycles. The adsorption process of cartap on Fe3O4@mSiO2@MIPs conformed to Langmuir adsorption isotherm with maximum adsorption capacity at 0.257 mmol/g and short equilibrium time of 30 min at 298 K. The AgNP colorimetric method semi-quantified cartap ≥5 mg/L by naked eye and quantified cartap 0.1–5 mg/L with LOD 0.01 mg/L by UV-vis spectroscopy. The AgNP colorimetric detection after pretreatment with Fe3O4@mSiO2@MIPs could be successfully utilized to recognize and detect cartap residues in tea beverages.

Comparison of toxicity of class-based organic chemicals to algae and fish based on discrimination of excess toxicity from baseline level.

Science.gov (United States)

Li, Jin J; Tai, Hong W; Yu, Yang; Wen, Yang; Wang, Xiao H; Zhao, Yuan H

2015-07-01

Toxicity data to fish and algae were used to investigate excess toxicity between species. Results show that chemicals exhibiting excess toxicity to fish also show excess toxicity to algae for most of the compounds. This indicates that they share the same mode of action between species. Similar relationships between logKOW and toxicities to fish and algae for baseline and less inert compounds suggest that they have similar critical body residues in the two species. Differences in excess toxicity for some compounds suggest that there is a difference of physiological structure and metabolism between fish and algae. Some reactive compounds (e.g. polyamines) exhibit greater toxic effects for algae than those for fish because of relatively low bio-uptake potential of these hydrophilic compounds in fish as compared with that in algae. Esters exhibiting greater toxicity in fish than that in algae indicate that metabolism can affect the discrimination of excess toxicity from baseline level. Algae growth inhibition is a very good surrogate for fish lethality. This is not only because overall toxicity sensitivity to algae is greater than that to fish, but also the excess toxicity calculated from algal toxicity can better reflect reactivity of compounds with target molecules than fish toxicity. Copyright © 2015 Elsevier B.V. All rights reserved.

Effect of process variables on the Drucker-Prager cap model and residual stress distribution of tablets estimated by the finite element method.

Science.gov (United States)

Hayashi, Yoshihiro; Otoguro, Saori; Miura, Takahiro; Onuki, Yoshinori; Obata, Yasuko; Takayama, Kozo

2014-01-01

A multivariate statistical technique was applied to clarify the causal correlation between variables in the manufacturing process and the residual stress distribution of tablets. Theophylline tablets were prepared according to a Box-Behnken design using the wet granulation method. Water amounts (X1), kneading time (X2), lubricant-mixing time (X3), and compression force (X4) were selected as design variables. The Drucker-Prager cap (DPC) model was selected as the method for modeling the mechanical behavior of pharmaceutical powders. Simulation parameters, such as Young's modulus, Poisson rate, internal friction angle, plastic deformation parameters, and initial density of the powder, were measured. Multiple regression analysis demonstrated that the simulation parameters were significantly affected by process variables. The constructed DPC models were fed into the analysis using the finite element method (FEM), and the mechanical behavior of pharmaceutical powders during the tableting process was analyzed using the FEM. The results of this analysis revealed that the residual stress distribution of tablets increased with increasing X4. Moreover, an interaction between X2 and X3 also had an effect on shear and the x-axial residual stress of tablets. Bayesian network analysis revealed causal relationships between the process variables, simulation parameters, residual stress distribution, and pharmaceutical responses of tablets. These results demonstrated the potential of the FEM as a tool to help improve our understanding of the residual stress of tablets and to optimize process variables, which not only affect tablet characteristics, but also are risks of causing tableting problems.

Potentially toxic elements in soil of the Khyber Pakhtunkhwa province and Tribal areas, Pakistan: evaluation for human and ecological risk assessment.

Science.gov (United States)

Saddique, Umar; Muhammad, Said; Tariq, Mohsin; Zhang, Hua; Arif, Mohammad; Jadoon, Ishtiaq A K; Khattak, Nimat Ullah

2018-03-22

Potentially toxic elements (PTEs) contaminations in the soil ecosystem are considered as extremely hazardous due to toxicity, persistence and bioaccumulative nature. Therefore, this study was aimed to summarize the results of published PTEs in soil of Khyber Pakhtunkhwa and Tribal areas, Pakistan. Results were evaluated for the pollution quantification factors, including contamination factor (CF), pollution load index (PLI), ecological risk index (ERI) and human health risk assessment. The highest CF (797) and PLI (7.35) values were observed for Fe and ERI (857) values for Cd. Soil PTEs concentrations were used to calculate the human exposure for the risk assessment, including chronic or non-carcinogenic risks such as the hazard quotient (HQ) and carcinogenic or cancer risk (CR). The values of HQ were > 1 for the Cd, Co and Cr in Khyber Pakhtunkhwa and Tribal areas. Tribal areas showed higher values of ERI, HQ, and CR as compared to the Khyber Pakhtunkhwa that were attributed to the mining activities, weathering and erosion of mafic and ultramafic bedrocks hosting ophiolites. This study strongly recommends that best control measures need to be taken for soil PTEs with the intent to alleviate any continuing potential threat to the human health, property and environment, which otherwise could enter ecosystem and ultimately the living beings. Further studies are recommended to combat the soil PTEs concentrations and toxicity in the Tribal areas for a best picture of understanding the element effects on human, and environment can be achieved that will lead to a sustainable ecological harmony.

Screening of foods and related products for toxic elements with a portable X-ray tube analyzer

International Nuclear Information System (INIS)

Anderson, D.L.

2009-01-01

Capabilities of a portable X-ray tube-based analyzer were evaluated for screening foods, thin films, and ceramic glazes for toxic elements. A beverage spiked with Cr, Cu, and As and cocoa powder spiked with As and Pb could easily be distinguished from unadulterated products when analyzed through their original container walls. With calibration, results for thin films and ceramic glazes yielded accurate Pb results. Limits of detection (LODs) were 0.2-15 and 15 μg cm -2 , respectively, for Pb and Cd in thin films and about 2 μg cm -2 for Pb in glazes. With analysis times of 0.5-1 min, sensitivities and LODs were superior to those obtained with radioisotopic X-ray fluorescence analysis. (author)

Mechanisms of Phosphine Toxicity

Directory of Open Access Journals (Sweden)

Nisa S. Nath

2011-01-01

Full Text Available Fumigation with phosphine gas is by far the most widely used treatment for the protection of stored grain against insect pests. The development of high-level resistance in insects now threatens its continued use. As there is no suitable chemical to replace phosphine, it is essential to understand the mechanisms of phosphine toxicity to increase the effectiveness of resistance management. Because phosphine is such a simple molecule (PH3, the chemistry of phosphorus is central to its toxicity. The elements above and below phosphorus in the periodic table are nitrogen (N and arsenic (As, which also produce toxic hydrides, namely, NH3 and AsH3. The three hydrides cause related symptoms and similar changes to cellular and organismal physiology, including disruption of the sympathetic nervous system, suppressed energy metabolism and toxic changes to the redox state of the cell. We propose that these three effects are interdependent contributors to phosphine toxicity.

Prediction of interface residue based on the features of residue interaction network.

Science.gov (United States)

Jiao, Xiong; Ranganathan, Shoba

2017-11-07

Protein-protein interaction plays a crucial role in the cellular biological processes. Interface prediction can improve our understanding of the molecular mechanisms of the related processes and functions. In this work, we propose a classification method to recognize the interface residue based on the features of a weighted residue interaction network. The random forest algorithm is used for the prediction and 16 network parameters and the B-factor are acting as the element of the input feature vector. Compared with other similar work, the method is feasible and effective. The relative importance of these features also be analyzed to identify the key feature for the prediction. Some biological meaning of the important feature is explained. The results of this work can be used for the related work about the structure-function relationship analysis via a residue interaction network model. Copyright © 2017 Elsevier Ltd. All rights reserved.

Chemical modelling of pore water composition from PFBC residues

International Nuclear Information System (INIS)

Karlsson, L.G.

1991-01-01

The concentration of trace elements varies depending on the source of the coal and also due to the combustion process used. Mercury is one important element among the trace elements in the coal residues, generally recognised as potentially harmful to the biological system. To predict the pore water concentrations of mercury and other important constituents leached from coal combustion residues disposal sites, mechanistic data on chemical reactions are required. The present study is an application of a basially thermodynamical approach using the geochemical code EQ3NR. The presence of discrete solid phases that control the aqueous concentrations of major elements such as aluminium, calcium and silicon are identified. Solid phases are modelled in equilibrium with a hypothetical pore water at a pH range of 7-11. In this study the thermodynamic database of EQ3NR has been complemented with data for cadmium, mercury and lead taken from the OECD/NEA Thermodynamic Database and from a compilation made by Lindsay. Possible solubility limiting phases for the important trace elements arsenic, cadmium, chromium, copper, mercury, nickel and lead have been identified. Concentrations of these trace elements as a function of pH in the hypothetical pore water were calculated using mechanistic thermodynamial data. The thermodynamical approach in this study seems justified because most solid residues that are either present or expected to form during weathering have relatively fast precipitation/dissolution kinetics. (21 refs., 18 figs., 5 tabs.)

Spatial clustering of toxic trace elements in adolescents around the Torreón, Mexico lead–zinc smelter

Science.gov (United States)

Garcia-Vargas, Gonzalo G.; Rothenberg, Stephen J.; Silbergeld, Ellen K.; Weaver, Virginia; Zamoiski, Rachel; Resnick, Carol; Rubio-Andrade, Marisela; Parsons, Patrick J.; Steuerwald, Amy J.; Navas-Acién, Ana; Guallar, Eliseo

2016-01-01

High blood lead (BPb) levels in children and elevated soil and dust arsenic, cadmium, and lead were previously found in Torreón, northern Mexico, host to the world’s fourth largest lead–zinc metal smelter. The objectives of this study were to determine spatial distributions of adolescents with higher BPb and creatinine-corrected urine total arsenic, cadmium, molybdenum, thallium, and uranium around the smelter. Cross-sectional study of 512 male and female subjects 12–15 years of age was conducted. We measured BPb by graphite furnace atomic absorption spectrometry and urine trace elements by inductively coupled plasma-mass spectrometry, with dynamic reaction cell mode for arsenic. We constructed multiple regression models including sociodemographic variables and adjusted for subject residence spatial correlation with spatial lag or error terms. We applied local indicators of spatial association statistics to model residuals to identify hot spots of significant spatial clusters of subjects with higher trace elements. We found spatial clusters of subjects with elevated BPb (range 3.6–14.7 µg/dl) and urine cadmium (0.18–1.14 µg/g creatinine) adjacent to and downwind of the smelter and elevated urine thallium (0.28–0.93 µg/g creatinine) and uranium (0.07–0.13 µg/g creatinine) near ore transport routes, former waste, and industrial discharge sites. The conclusion derived from this study was that spatial clustering of adolescents with high BPb and urine cadmium adjacent to and downwind of the smelter and residual waste pile, areas identified over a decade ago with high lead and cadmium in soil and dust, suggests that past and/or present plant operations continue to present health risks to children in those neighborhoods. PMID:24549228

Phytoextraction of potentially toxic elements by Indian mustard, rapeseed, and sunflower from a contaminated riparian soil.

Science.gov (United States)

Shaheen, Sabry M; Rinklebe, Jörg

2015-12-01

The objective of this study was to quantify the phytoextraction of the potentially toxic elements Al, As, Cd, Co, Cr, Cu, Mo, Ni, Pb, Se, V, and Zn by Indian mustard, rapeseed, and sunflower from a contaminated riparian soil. To achieve this goal, a greenhouse pot experiment was established using a highly contaminated grassland soil collected at the Wupper River (Germany). The impact of ethylene-diamine-tetra-acetic acid (EDTA), humate (HK), and phosphate potassium (PK) on the mobility and uptake of the elements by rapeseed also was investigated. Indian mustard showed the highest efficiency for phytoextraction of Al, Cr, Mo, Se, and V; sunflower for Cd, Ni, Pb, and Zn, and rapeseed for Cu. The bioconcentration ratios were higher than 1 for the elements (except As and Cu), indicating the suitability of the studied plants for phytoextraction. Application of EDTA to the soil increased significantly the solubility of Cd, Co, Cr, Ni, and Pb and decreased the solubility of Al, As, Se, V, and Mo. Humate potassium decreased significantly the concentrations of Al and As in rapeseed but increased the concentrations of Cu, Se, and Zn. We may conclude that HK can be used for immobilization of Al and As, while it can be used for enhancing the phytoextraction of Cu, Se, and Zn by rapeseed. Phosphate potassium immobilized Al, Cd, Pb, and Zn, but enhanced phytoextraction of As, Cr, Mo, and Se by rapeseed.

Insecticide residues in stored grains in Sonora, Mexico: quantification and toxicity testing.

Science.gov (United States)

Aldana-Madrid, M L; Valdez-Hurtado, S; Vargas-Valdez, N D; Salazar-Lopez, N J; Silveira-Gramont, M I; Loarca-Piña, F G; Rodríguez-Olibarria, G; Wong-Corral, F J; Borboa-Flores, J; Burgos-Hernández, A

2008-02-01

Food safety has acquired great attention by food importer and exporters. Food rejection or acceptance across international borders is based on the compliance with international food regulations. Due to the lack of recent data on pesticide residues in Mexican grains, this study focused on detecting and quantifying insecticide residues in stored wheat, corn, chickpeas, and beans, as well as to determine their mutagenic potential. Grains were sampled from primary storage sites in Sonora, Mexico. Malathion, chlorpyrifos, deltamethrin, cypermethrin, 4,4-DDE, 4,4-DDD and 4,4-DDT were analyzed in 135 samples. Grain samples were not mutagenic and most pesticide levels were within regulation limits.

Evaluation of metals, metalloids, and ash mixture toxicity using sediment toxicity testing.

Science.gov (United States)

Stojak, Amber; Bonnevie, Nancy L; Jones, Daniel S

2015-01-01

In December 2008, a release of 4.1 million m(3) of coal ash from the Tennessee Valley Authority Kingston Fossil Plant occurred. Ash washed into the Emory River and migrated downstream into the Clinch and Tennessee Rivers. A Baseline Ecological Risk Assessment evaluated risks to ecological receptors from ash in the river system post-dredging. This article describes the approach used and results from sediment toxicity tests, discussing any causal relationships between ash, metals, and toxicity. Literature is limited in the realm of aquatic coal combustion residue (CCR) exposures and the potential magnitude of effects on benthic invertebrates. Sediment samples along a spectrum of ash content were used in a tiered toxicity testing approach and included a combination of 10 day sediment toxicity acute tests and longer-term, partial life cycle "definitive" tests with 2 species (Hyalella azteca and Chironomus dilutus). Arsenic, and to a lesser extent Se, in the ash was the most likely toxicant causing observed effects in the laboratory toxicity tests. Sites in the Emory River with the greatest statistical and biologically significant effects had As concentrations in sediments twice the probable effects concentration of 33 mg/kg. These sites contained greater than 50% ash. Sites with less than approximately 50% ash in sediments exhibited fewer significant toxic responses relative to the reference sediment in the laboratory. The results discussed here present useful evidence of only limited effects occurring from a worst-case exposure pathway. These results provided a valuable line of evidence for the overall assessment of risks to benthic invertebrates and to other ecological receptors, and were crucial to risk management and development of project remediation goals. © 2014 SETAC.

Geochemistry of Toxic Elements and Their Removal via the Preparation of High-Uranium Coal in Southwestern China

Directory of Open Access Journals (Sweden)

Piaopiao Duan

2018-02-01

Full Text Available High-uranium (U coal is the dominant form of coal in Southwestern China. However, directly utilizing this resource can also harm the environment because this element is radioactive; it is, therefore, necessary to clean this kind of coal before burning. This research studied the geochemistry of toxic elements and their partitioning during the preparation of high-U coal in China. The results show that high-U coals are mainly distributed in Southwestern China and are characterized by a high organic sulfur (S content and vanadium (V-chromium (Cr-molybdenum (Mo-U element assemblage. These elements are well-correlated with one another, but are all negatively related to ash yield, indicating that all four are syngenetic in origin and associated with organic materials. A mineralogical analysis shows that U in Ganhe and Rongyang coal occurs within fine-grained anatase, clay minerals, guadarramite, and pyrite, while V occurs in clay minerals, pyrite, and dolomite, and Cr occurs in dolomite. Other elements, such as fluorine (F, lead (Pb, selenium (Se, and mercury (Hg, mainly occur in pyrite. By applying a gravity separation method to separate minerals from coal, the content of the enrichment element assemblage of V-Cr-Mo-U in Rongyang coal is still shown to be higher than, or close to, that of the original feed because this element assemblage is derived from hydrothermal fluids during syngenetic or early diagenetic phases, but other elements (beryllium [Be], F, manganese [Mn], zinc [Zn], Pb, arsenic [As], Se, Hg can be efficiently removed. Once cleaned, the coal obtained by gravity separation was subject to a flotation test to separate minerals; these results indicate that while a portion of V and Cr can be removed, Mo and U remain difficult to extract. It is evident that the two most commonly utilized industrialized coal preparation methods, gravity separation and flotation, cannot effectively remove U from coal where this element occurs in large

Long-term use of biosolids as organic fertilizers in agricultural soils: potentially toxic elements occurrence and mobility.

Science.gov (United States)

Marguí, E; Iglesias, M; Camps, F; Sala, L; Hidalgo, M

2016-03-01

The presence of potentially toxic elements (PTEs) may hinder a more widespread application of biosolids in agriculture. At present, the European Directive 86/278/CEE limit the total concentrations of seven metals (Cu, Cr, Ni, Pb, Zn, Cd and Hg) in agricultural soils and in sewage sludges used as fertilizers but it has not taken into consideration the potential impacts of other emerging micropollutants that may be present in the biosolids as well as their mobility. The aim of this study was to evaluate the accumulation and mobility of 13 elements (including regulated metals and other inorganic species) in agricultural soils repeatedly amended with biosolids for 15 years. Firstly, three digestions programs using different acid mixtures were tested to evaluate the most accurate and efficient method for analysis of soil and sludge. Results demonstrated that sewage sludge application increased concentrations of Pb and Hg in soil, but values did not exceed the quality standard established by legislation. In addition, other elements (As, Co, Sb, Ag, Se and Mn) that at present are not regulated by the Spanish and European directives were identified in the sewage sludge, and significant differences were found between Ag content in soils amended with biosolids in comparison with control soils. This fact can be related to the increasing use of silver nanoparticles in consumer products due to their antibacterial properties. Results from the leaching tests show up that, in general, the mobility degree for both regulated and non-regulated elements in soils amended with biosolids was quite low (<10 %).

Life-cycle assessment of selected management options for air pollution control residues from waste incineration.

Science.gov (United States)

Fruergaard, Thilde; Hyks, Jiri; Astrup, Thomas

2010-09-15

Based on available technology and emission data seven selected management options for air-pollution-control (APC) residues from waste incineration were evaluated by life-cycle assessment (LCA) using the EASEWASTE model. Scenarios were evaluated with respect to both non-toxicity impact categories (e.g. global warming) and toxicity related impact categories (e.g. ecotoxicity and human toxicity). The assessment addressed treatment and final placement of 1 tonne of APC residue in seven scenarios: 1) direct landfilling without treatment (baseline), 2) backfilling in salt mines, 3) neutralization of waste acid, 4) filler material in asphalt, 5) Ferrox stabilization, 6) vitrification, and 7) melting with automobile shredder residues (ASR). The management scenarios were selected as examples of the wide range of different technologies available worldwide while at the same time using realistic technology data. Results from the LCA were discussed with respect to importance of: energy consumption/substitution, material substitution, leaching, air emissions, time horizon aspects for the assessment, and transportation distances. The LCA modeling showed that thermal processes were associated with the highest loads in the non-toxicity categories (energy consumption), while differences between the remaining alternatives were small and generally considered insignificant. In the toxicity categories, all treatment/utilization options were significantly better than direct landfilling without treatment (lower leaching), although the thermal processes had somewhat higher impacts than the others options (air emissions). Transportation distances did not affect the overall ranking of the management alternatives. Copyright 2010 Elsevier B.V. All rights reserved.

A Challenging Case of Acute Mercury Toxicity

Directory of Open Access Journals (Sweden)

Ali Nayfeh

2018-01-01

Full Text Available Background. Mercury exists in multiple forms: elemental, organic, and inorganic. Its toxic manifestations depend on the type and magnitude of exposure. The role of colonoscopic decompression in acute mercury toxicity is still unclear. We present a case of acute elemental mercury toxicity secondary to mercury ingestion, which markedly improved with colonoscopic decompression. Clinical Case. A 54-year-old male presented to the ED five days after ingesting five ounces (148 cubic centimeters of elemental mercury. Examination was only significant for a distended abdomen. Labs showed elevated serum and urine mercury levels. An abdominal radiograph showed radiopaque material throughout the colon. Succimer and laxatives were initiated. The patient had recurrent bowel movements, and serial radiographs showed interval decrease of mercury in the descending colon with interval increase in the cecum and ascending colon. Colonoscopic decompression was done successfully. The colon was evacuated, and a repeat radiograph showed decreased hyperdense material in the colon. Three months later, a repeat radiograph showed no hyperdense material in the colon. Conclusion. Ingested elemental mercury can be retained in the colon. Although there are no established guidelines for colonoscopic decompression, our patient showed significant improvement. We believe further studies on this subject are needed to guide management practices.

The water-soluble fraction of potentially toxic elements in contaminated soils: relationships between ecotoxicity, solubility and geochemical reactivity.

Science.gov (United States)

Rocha, L; Rodrigues, S M; Lopes, I; Soares, A M V M; Duarte, A C; Pereira, E

2011-09-01

To better understand the impacts posed by soil contamination to aquatic ecosystems it is crucial to characterise the links between ecotoxicity, chemical availability and geochemical reactivity of potentially toxic elements (PTE's) in soils. We evaluated the adverse effects of water extracts obtained from soils contaminated by chemical industry and mining, using a test battery including organisms from different trophic levels (bacteria, algae and daphnids). These tests provided a quick assessment of the ecotoxicity of soils with respect to possible adverse effects on aquatic organisms although the ecotoxicological responses could be related to the solubility of PTE's only to a limited extent. The analysis of results of bioassays together with the chemical characterisation of water extracts provided additional relevant insight into the role of conductivity, pH, Al, Fe, and Mn of soil extracts on toxicity to organisms. Furthermore, an important conclusion of this study was that the toxicity of extracts to the aquatic organisms could also be related to the soil properties (pH, Org C and Fe(ox)) and to the reactivity of PTE's in soils which in fact control the soluble fraction of the contaminants. The combined assessment of ecotoxicity in water fractions, solubility and geochemical reactivity of PTE's in soils provided a more comprehensive understanding of the bioavailability of inorganic contaminants than ecotoxicological or chemical studies alone and can therefore be most useful for environmental risks assessment of contaminated soils. Copyright © 2011 Elsevier Ltd. All rights reserved.

Detection of residues antibiotics in food using a microbiological method

International Nuclear Information System (INIS)

Ben Ali, Ahmed

2007-01-01

Antibiotics are effective therapeutic agents because of their property of selective bacterial toxicity which helps controlling infections. Animals, just like humans, can be treated with antibiotics. This use of antibiotics can lead to the development of resistance. Resistant strains may cause severe infections in humans and animals. In addition, antibiotic residues might represent a problem for human health. Our objective is to develop a microbiological method for the detection of antibiotic residues in poultry(muscle, liver,...). For this purpose, antibiotic sensitive bacteria and selective agar media were used. An inhibition growth zone surrounds each of the food samples containing antibiotic residues after a prescribed incubation time. (Author). 23 refs

Bioavailability and risk assessment of potentially toxic elements in garden edible vegetables and soils around a highly contaminated former mining area in Germany.

Science.gov (United States)

Antoniadis, Vasileios; Shaheen, Sabry M; Boersch, Judith; Frohne, Tina; Du Laing, Gijs; Rinklebe, Jörg

2017-01-15

Although soil contamination by potentially toxic elements (PTEs) in Europe has a history of many centuries, related problems are often considered as having been dealt with due to the enforcement of tight legislations. However, there are many unsolved issues. We aimed to assess PTE levels in highly contaminated soils and in garden edible vegetables using human health risk indices in order to evaluate the availability and mobilization of arsenic (As), copper (Cu), manganese (Mn), mercury (Hg), lead (Pb), and zinc (Zn). In four gardens in Germany, situated on, or in the vicinity of, a mine dump area, we planted beans (Phaseolus vulgaris ssp. nanus), carrots (Daucus sativus) and lettuce (Lactuca sativa ssp. capitata). We examined soil-to-plant mobilization of elements using transfer coefficient (TC), as well as soil contamination using contamination factor (CF), enrichment factor (EF), and bioaccumulation index (I geo ). In addition, we tested two human health risk assessment indices: Soil-induced hazard quotient (HQ S ) (representing the "direct soil ingestion" pathway), and vegetable-induced hazard quotient (HQ V ) (representing the "vegetable intake" pathway). The studied elements were highly elevated in the soils. The values in garden 2 were especially high (e.g., Pb: 13789.0 and Hg: 36.8 mg kg -1 ) and largely exceeded the reported regulation limits of 50 (for As), 40 (Cu), 400 (Pb), 150 (Zn), and 5 (Hg) mg kg -1 . Similarly, element concentrations were very high in the grown vegetables. The indices of CF, EF and I geo were enhanced even to levels that are rarely reported in the literature. Specifically, garden 2 indicated severe contamination due to multi-element deposition. The contribution of each PTE to the total of measured HQ S revealed that Pb was the single most important element causing health risk (contributing up to 77% to total HQ S ). Lead also posed the highest risk concerning vegetable consumption, contributing up to 77% to total HQ V . The

The Toxicity of Depleted Uranium

OpenAIRE

Briner, Wayne

2010-01-01

Depleted uranium (DU) is an emerging environmental pollutant that is introduced into the environment primarily by military activity. While depleted uranium is less radioactive than natural uranium, it still retains all the chemical toxicity associated with the original element. In large doses the kidney is the target organ for the acute chemical toxicity of this metal, producing potentially lethal tubular necrosis. In contrast, chronic low dose exposure to depleted uranium may not produce a c...

Toxicity identification evaluation of cosmetics industry wastewater.

Science.gov (United States)

de Melo, Elisa Dias; Mounteer, Ann H; Leão, Lucas Henrique de Souza; Bahia, Renata Cibele Barros; Campos, Izabella Maria Ferreira

2013-01-15

The cosmetics industry has shown steady growth in many developing countries over the past several years, yet little research exists on toxicity of wastewaters it generates. This study describes a toxicity identification evaluation conducted on wastewater from a small Brazilian hair care products manufacturing plant. Physicochemical and ecotoxicological analyses of three wastewater treatment plant inlet and outlet samples collected over a six month period revealed inefficient operation of the treatment system and thus treated wastewater organic matter, suspended solids and surfactants contents consistently exceeded discharge limits. Treated wastewater also presented high acute toxicity to Daphnia similis and chronic toxicity to Ceriodaphnia dubia and Pseudokirchneriella subcapitata. This toxicity was associated with suspended solids, volatile or sublatable and non-polar to moderately polar organic compounds that could be recovered in filtration and aeration residues. Seven surfactants used in the largest quantities in the production process were highly toxic to P. subcapitata and D. similis. These results indicated that surfactants, important production raw materials, are a probable source of toxicity, although other possible sources, such as fragrances, should not be discarded. Improved treatment plant operational control may reduce toxicity and lower impact of wastewater discharge to receiving waters. Copyright © 2012 Elsevier B.V. All rights reserved.

Determination of toxic and essential elements in blood and milk from female subjects in a Lead contaminated community in Zamfara State, Nigeria

International Nuclear Information System (INIS)

Ojo, J.; Komolafe, O.; Obiajunwa, P.; Ogunba, B.; Adesanmi, C.; Kanoma, M.; Adedeji, S.; Horsvat, M.

2011-01-01

Occurrence of lead poisoning associated with gold mining and processing was reported around March 2010 in some communities of Zamfara State, leading to hundreds of fatalities, especially among children. We have evaluated the levels of lead and other elements (both toxic and essential) in human milk and whole blood samples obtained from 27 subjects at the village of Yargalma, in Anka Local Government Area of Zamfara State. Milk and blood samples were lyophilized at the Obafemi Awolowo University Teaching Hospital Complex, lIe-Ife, and were further sterilized by gamma irradiation (20 -30 kGy) at the National Radiation Centre, Abuja. Elemental analyses were carried out at the Josef Stefan Institute, Ljubljana, Slovenia for determination of Pb, Cd, As, Se, Zn and Cu by ICP-MS; and Hg by Direct Hg analyser. The significant contamination of the environment leading to the reported cases of Pb-poisoning in Zamfara gold mines have been confirmed by elevated levels of Pb measured in samples of blood and human milk. The levels of Pb in blood ranged from 7.9 - 86.8μg/dL (mean±SD: 55.6±19.6μg/dL) while levels of this toxic element in human milk ranged from 2 - 140 ng/ml (mean±SD: 45±37 ng/ml). These values, in asymptomatic subjects, are extremely high indeed. A number of interesting correlations between elemental levels in milk and blood of mothers, and the age of mother and period after birth have also been demonstrated. For instance Mothers age significantly correlates with blood Pb (confirming accumulation in bones which affect blood lead level in lactating mothers). On the other hand, Mother's age significantly correlate negatively with Blood Selenium. Levels of the essential element Zn in both blood and milk of mother significantly correlate negatively with the time elapsed after child delivery (Baby's Age) as is reported in literature. We hesitate to suggest that breast-feeding of babies be limited in these subjects, knowing the several other important nutrients

Development of a database: DACTARI for a radio-toxic element ranking methodology

International Nuclear Information System (INIS)

Ansoborlo, E.; Santucci, C.; Grouiller, J.P.; Boucher, L.; Fluery-Herard, A.; Menetrier, F.; Comte, A.; Cook, E.; Moulin, V.

2007-01-01

Dosimetric impact studies aim at evaluating potential radiological effects of chronic or acute releases from nuclear facilities. A methodology for ranking radionuclides (RN) in terms of their health-related impact on the human population was first developed at CEA with specific criteria for each RN that could be applied to a variety of situations. It is based, in particular, on applying physico-chemical criteria to the complete RN inventory (present in the release or in the source term) and on applying norms related to radiation protection and chemical toxicology. The initial step consisted in identifying and collecting data necessary to apply the methodology, with reference to a previous database of long-lived radionuclides (LLRN, with half-lives ranging from 30 to 10 14 y) containing 95 radionuclides. The initial results have allowed us to identify missing data and revealed the need to complete the study for both toxic and radio-toxic aspects. This led us to the next step, developing a specific database, Database for Chemical Toxicity and Radiotoxicity Assessment of RadIonuclides (DACTARI), to collect data on chemical toxicity and radiotoxicity, including acute or chronic toxicity, the chemical form of the compounds, the contamination route (ingestion, inhalation), lethal doses, target organs, intestinal and maternal-foetal transfer, drinking water guidelines and the mutagenic and carcinogenic properties. (authors)

Numerical Analysis of Residual Stress and Distortion Use Finite Element Method on Inner Bottom Construction of Geomarin IV Survey Ship with Welding Sequence Variations

Science.gov (United States)

Syahroni, N.; Hartono, A. B. W.; Murtedjo, M.

2018-03-01

In the ship fabrication industry, welding is the most critical stage. If the quality of welding on ship fabrication is not good, then it will affect the strength and overall appearance of the structure. One of the factors that affect the quality of welding is residual stress and distortion. In this research welding simulation is performed on the inner bottom construction of Geomarin IV Ship Survey using shell element and has variation to welding sequence. In this study, welding simulations produced peak temperatures at 2490 K at variation 4. While the lowest peak temperature was produced by variation 2 with a temperature of 2339 K. After welding simulation, it continued simulating residual stresses and distortion. The smallest maximum tensile residual stress found in the inner bottom construction is 375.23 MPa, and the maximum tensile pressure is -20.18 MPa. The residual stress is obtained from variation 3. The distortion occurring in the inner bottom construction for X=720 mm is 4.2 mm and for X=-720 mm, the distortion is 4.92 mm. The distortion is obtained from the variation 3. Near the welding area, distortion value reaches its minimum point. This is because the stiffeners in the form of frames serves as anchoring.

On residual stress prescriptions for fitness for service assessment of pipe girth welds

International Nuclear Information System (INIS)

Dong, Pingsha; Song, Shaopin; Zhang, Jinmiao; Kim, Myung H.

2014-01-01

This paper aims to provide a detailed assessment of some of the existing residual stress profiles stipulated in widely used fitness-for-service assessment codes and standards, such as BS 7910 Appendix Q and API 579 RP Annex E, by taking advantage of some comprehensive residual stress studies that have recently become available. After presenting a case study on which residual stress measurements are available for validating finite element based residual stress analysis procedure, residual stress profiles stipulated in BS 7910 for pipe girth welds are selected for detailed evaluation by comparing residual stress distribution characteristics shown in parametric finite element results. A shell theory based full-field residual stress profile estimation scheme is then presented to illustrate how an improved estimation of residual stress profiles can be achieved in light of some of the deficiencies in BS 7910 and API 579 identified in this study. - Highlights: • Critically assessed girth weld residual stress profiles in major FFS Codes and Standards. • Identified deficiencies in relating to pipe geometry, heat input, and axial distance from weld. • Presented a shell theory based scheme for prescribing full-field residual stress profiles

Fuel characteristics and pyrolysis studies of solvent extractables and residues from the evergreen shrub Calotropis procera

Energy Technology Data Exchange (ETDEWEB)

Erdman, M.D.; Gregorski, K.S.; Pavlath, A.E.

1984-01-01

Solvent extractables and residues from milkweed were evaluated as sources of liquid and solid fuels. Selected chemical, physical and pyrolytic determinations of the extractables and residues indicated that hexane extract is a potentially valuable, high density fuel resource. Methanol extract was shown to be a lower energy, highly toxic extract. Extracted residues were demonstrated to be valuable as solid fuel energy resources. 31 references.

The determination of pesticide residues and contaminants in vegetables by means of neutron activation analysis. Part of a coordinated programme on nuclear detection and analysis

International Nuclear Information System (INIS)

Mongkolphanta, S.

1977-11-01

Neutron activation techniques have been applied to study the existence of pesticide residues (As, Br, Hg) and pollutants (Cd, Co, Zn) in local vegetable and fruit samples, polished and unpolished glutinous and non-glutinous milled rice, and fish caught in polluted and unpolluted areas of the Gulf of Thailand. Since the baseline levels of these toxic elements in vegetables, fruits, rice and fish are not known as yet, the results cannot be regarded as conclusive. Furthermore, no significant difference was observed in the concentration of these elements in fish caught in polluted and unpolluted areas. The Gulf of Thailand does not therefore appear to be polluted at present. The substoichiometric isotope dilution technique was successfully applied to mercury determinations, and only to a limited extent to Cd due to shutdown of the TRR-1 reactor

Association between essential trace and toxic elements in scalp hair samples of smokers rheumatoid arthritis subjects

Energy Technology Data Exchange (ETDEWEB)

Afridi, Hassan Imran, E-mail: hassanimranafridi@yahoo.com [Mechanical and Manufacturing Engineering, Dublin City University, Dublin, Ireland. (Ireland); National Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro (Pakistan); Kazi, Tasneem Gul, E-mail: tgkazi@yahoo.com [National Center of Excellence in Analytical Chemistry, University of Sindh, Jamshoro (Pakistan); Brabazon, Dermot, E-mail: dermot.brabazon@dcu.ie [Mechanical and Manufacturing Engineering, Dublin City University, Dublin, Ireland. (Ireland); Naher, Sumsun, E-mail: sumsun.naher@dcu.ie [Mechanical and Manufacturing Engineering, Dublin City University, Dublin, Ireland. (Ireland)

2011-12-15

The incidence of rheumatoid arthritis (RA) has been increased among people who possess habit of tobacco smoking. In the present study, zinc (Zn), copper (Cu), manganese (Mn), lead (Pb) and cadmium (Cd) were determined in scalp hair samples of smokers and nonsmokers RA patients, residents of Dublin, Ireland. For comparison purposes scalp hair samples of age and sex matched healthy smokers and nonsmokers were also analyzed. The concentrations of understudied elements were measured by inductive coupled plasma atomic emission spectrophotometer, prior to microwave assisted acid digestion. The validity and accuracy of methodology was checked using certified reference material (NCS ZC 81002b) and by the conventional wet acid digestion method on the same certified reference material and on real samples. The mean hair Zn, Cu and Mn contents were significantly lower in smokers and nonsmokers RA patients as compared to healthy individuals (p = 0.01-0.001). Whereas the concentrations of Cd and Pb were significantly higher in scalp hair samples of RA patients of both group (p < 0.001). The referent smokers have high level of Cd and Pb in their scalp hair samples as compared to those had not smoking tobacco (p < 0.01). The ratio of Cd and Pb to Zn, Cu and Mn in scalp hair samples was also calculated. The Cd/Zn ratio was higher in smoker RA patients with related to nonsmoker RA and referents. This study is compelling evidence in support of positive associations between toxic elements, cigarette smoking, deficiency of essential trace elements and risk of arthritis.

Harmful potential toxic elements in greenhouse soils under long-term cultivation in Almería (Spain)

Science.gov (United States)

Joaquin Ramos-Miras, Jose; Rodríguez Martín, Jose Antonio; Boluda, Rafael; Bech, Jaume; Gil, Carlos

2014-05-01

Heavy metals (HM) are considered highly significant environmental contaminants and are the object of many scientific research works into the soil environment. Activities like agriculture or industry can increase the concentration of these contaminants in soils and waters, which can affect the food chain. Intensification of certain agricultural practices, constant and excessive use of fertilizers and phytosanitary products, and using machinery, increase the HM content in agricultural soils. Many studies have dealt with HM accumulation over time. Despite these works, the influence of long periods of time on these contents, the dynamics and evolution of these elements in agricultural soils, especially soils used for intensive farming purposes under greenhouse conditions, remain unknown to a certain extent. The western Almería region (Spain) is a very important area from both the socio-economic and agricultural viewpoints. A common practice in greenhouse agriculture is the addition of agrochemicals to soils and crops to improve nutrient supply or crop protection and disease control. Such intense agricultural activity has a strong impact, which may have negative repercussions on both these greenhouse soils and the environment. A research has been carried out to determine the total and available levels of six harmful potentially toxic elements (Cd, Cu, Pb, Ni, Zn and Co), and to assess long-term variations in the greenhouse soils of western Almeria. The results indicate that managing soils in the greenhouse preparation stage determines major changes in total and available HM contents. Furthermore, Cd, Cu and Pb enrichment in soil was observed depending on the element and years of growth.

Association between essential trace and toxic elements in scalp hair samples of smokers rheumatoid arthritis subjects

International Nuclear Information System (INIS)

Afridi, Hassan Imran; Kazi, Tasneem Gul; Brabazon, Dermot; Naher, Sumsun

2011-01-01

The incidence of rheumatoid arthritis (RA) has been increased among people who possess habit of tobacco smoking. In the present study, zinc (Zn), copper (Cu), manganese (Mn), lead (Pb) and cadmium (Cd) were determined in scalp hair samples of smokers and nonsmokers RA patients, residents of Dublin, Ireland. For comparison purposes scalp hair samples of age and sex matched healthy smokers and nonsmokers were also analyzed. The concentrations of understudied elements were measured by inductive coupled plasma atomic emission spectrophotometer, prior to microwave assisted acid digestion. The validity and accuracy of methodology was checked using certified reference material (NCS ZC 81002b) and by the conventional wet acid digestion method on the same certified reference material and on real samples. The mean hair Zn, Cu and Mn contents were significantly lower in smokers and nonsmokers RA patients as compared to healthy individuals (p = 0.01–0.001). Whereas the concentrations of Cd and Pb were significantly higher in scalp hair samples of RA patients of both group (p < 0.001). The referent smokers have high level of Cd and Pb in their scalp hair samples as compared to those had not smoking tobacco (p < 0.01). The ratio of Cd and Pb to Zn, Cu and Mn in scalp hair samples was also calculated. The Cd/Zn ratio was higher in smoker RA patients with related to nonsmoker RA and referents. This study is compelling evidence in support of positive associations between toxic elements, cigarette smoking, deficiency of essential trace elements and risk of arthritis.

''In situ'' investigations of the radioactive fissionable element infiltration and retention in different soils

International Nuclear Information System (INIS)

Oncescu, M.; Danis, A.; Sahagia, M.; Negrescu, C.; Bobe, M.; Balanescu, P.; Burcescu, M.; Tautu, N.

1980-01-01

''In situ'' investigations of the natural and forced infiltration and retention of the fissionable elements from a liquid residue in several natural compacted soils and compacted clays are presented. The velocities and flow rates for different stages of the residue infiltration are determined. The retention of the fissionable elements by variation of the fissionable element concentration with the distance from the place of the residue depot is investigated. (author)

Detection and Identification of potentially toxic elements in urban soil using in situ spectroscopy

Science.gov (United States)

Brook, Anna; Kopel, Daniella; Wittenberg, Lea

2017-04-01

Anthropogenic urban soils are the foundation of the urban green infrastructure, the green net quality is as good as each of its patches. In early days of pedology urban soil has been recognized with respect to contamination and the risks for human health but in study performed since the 70s, the importance of urban soil for the urban ecology became increasingly significant. Urban soils are highly disturbed land that was created by the process of urbanization. The dominant agent in the creation of urban soils is human activity which modifies the natural soil through mixing, filling or by contamination of land surfaces so as to create a layer of urban soil which can be more than 50 cm thick. The objective of this study is to determine the extent to which field spectroscopy methods can be used to extend the knowledge of toxic elements in urban soils. The majority of the studies on urban soils concentrate on identifying and mapping of known pollution mostly certain heavy metals, we are focusing on almost non disturbed soils where no direct disturbance occurred but the urban matrix inflicted on it. The elements in those soils where an-knowns features. In this study a top-down analysis is applied for detecting the presence of minerals, organic matter and pollutants in mixed soil samples. Results of the proposed top-down unmixing method suggest that the analysis is made very fast due to the simplified hierarchy which avoids the high-learning curve associated with unmixing algorithms showed that the most abundant components were coarse organic matter 12% followed by concrete dust, plastic crumbs, other man made materials, clay and other minerals. The results of the soils pH, measured electrometrically and the particle size distribution, measured by Laser diffraction, indicate there is no big different between the samples particle size distribution and the pH values of the samples but they are not significantly different from the expected, except for the OM percentage which

Determination of trace elements in coffee beans and instant coffee of various origins by INAA

International Nuclear Information System (INIS)

Zaidi, J.H.; Fatima, I.; Arif, M.; Qureshi, I.H.

2006-01-01

Extensive use of coffee, by one-third of world's population, entails the evaluation of trace element contents in it. Instrumental neutron activation analysis (INAA) was successfully employed to determine the concentration of 20 trace elements (essential, toxic and nonessential) in four samples of coffee beans of various origins and two instant coffee brands most commonly consumed in Pakistan. Base-line values of certain toxic and essential elements in coffee are provided. The daily intake of essential and toxic elements through coffee was estimated and compared with the recommended values. The cumulative intake of Mn is four times higher than the recommended value and that of toxic elements is well below the tolerance limits. (author)

A novel microbial fuel cell sensor with biocathode sensing element.

Science.gov (United States)

Jiang, Yong; Liang, Peng; Liu, Panpan; Wang, Donglin; Miao, Bo; Huang, Xia

2017-08-15

The traditional microbial fuel cell (MFC) sensor with bioanode as sensing element delivers limited sensitivity to toxicity monitoring, restricted application to only anaerobic and organic rich water body, and increased potential fault warning to the combined shock of organic matter/toxicity. In this study, the biocathode for oxygen reduction reaction was employed for the first time as the sensing element in MFC sensor for toxicity monitoring. The results shown that the sensitivity of MFC sensor with biocathode sensing element (7.4±2.0 to 67.5±4.0mA% -1 cm -2 ) was much greater than that showed by bioanode sensing element (3.4±1.5 to 5.5±0.7mA% -1 cm -2 ). The biocathode sensing element achieved the lowest detection limit reported to date using MFC sensor for formaldehyde detection (0.0005%), while the bioanode was more applicable for higher concentration (>0.0025%). There was a quicker response of biocathode sensing element with the increase of conductivity and dissolved oxygen (DO). The biocathode sensing element made the MFC sensor directly applied to clean water body monitoring, e.g., drinking water and reclaimed water, without the amending of background organic matter, and it also decreased the warning failure when challenged by a combined shock of organic matter/toxicity. Copyright © 2017 Elsevier B.V. All rights reserved.

Applications of bauxite residue: A mini-review.

Science.gov (United States)

Verma, Ajay S; Suri, Narendra M; Kant, Suman

2017-10-01

Bauxite residue is the waste generated during alumina production by Bayer's process. The amount of bauxite residue (40-50 wt%) generated depends on the quality of bauxite ore used for the processing. High alkalinity and high caustic content in bauxite residue causes environmental risk for fertile soil and ground water contamination. The caustic (NaOH) content in bauxite residue leads to human health risks, like dermal problems and irritation to eyes. Moreover, disposal of bauxite residue requires a large area; such problems can only be minimised by utilising bauxite residue effectively. For two decades, bauxite residue has been used as a binder in cement industries and filler/reinforcement for composite materials in the automobile industry. Valuable metals and oxides, like alumina (Al 2 O 3 ), titanium oxide (TiO 2 ) and iron oxide Fe 2 O 3 , were extracted from bauxite residue to reduce waste. Bauxite residue was utilised in construction and structure industries to make geopolymers. It was also used in the making of glass-ceramics and a coating material. Recently bauxite residue has been utilised to extract rare earth elements like scandium (Sc), yttrium (Y), lanthanum (La), cerium (Ce), neodymium (Nd) and dysprosium (Dy). In this review article, the mineralogical characteristics of bauxite residue are summarised and current progresses on utilisation of bauxite residue in different fields of science and engineering are presented in detail.

Revealing the Cytotoxicity of Residues of Phosphazene Catalysts Used for Synthesis of Poly(ethylene oxide)

KAUST Repository

Xia, Yening

2017-08-24

We herein report a case study on the toxicity of residual catalyst in metal-free polymer. Eight-arm star-like poly(ethylene oxide)s were successfully synthesized via phosphazene-catalyzed ring-opening polymerization of ethylene oxide using sucrose as an octahydroxy initiator. The products were subjected to MTT assay using human cancer cell lines (MDA-MB-231 and A2780). Comparison between the crude and purified products clearly revealed that the residual phosphazenium salts were considerably cytotoxic regardless of the anionic species, and that the cytotoxicity of more bulky t-BuP4 salt was higher than that of t-BuP2 salt. Such results have therefore put forward the necessity for removal of the catalyst residues from PEO-based polymers synthesized through phosphazene catalysis for bio-related applications, and for the development of less or non-toxic organocatalysts for such polymers.

Revealing the Cytotoxicity of Residues of Phosphazene Catalysts Used for Synthesis of Poly(ethylene oxide)

KAUST Repository

Xia, Yening; Shen, Jizhou; Alamri, Haleema; Hadjichristidis, Nikolaos; Zhao, Junpeng; Wang, Yucai; Zhang, Guangzhao

2017-01-01

We herein report a case study on the toxicity of residual catalyst in metal-free polymer. Eight-arm star-like poly(ethylene oxide)s were successfully synthesized via phosphazene-catalyzed ring-opening polymerization of ethylene oxide using sucrose as an octahydroxy initiator. The products were subjected to MTT assay using human cancer cell lines (MDA-MB-231 and A2780). Comparison between the crude and purified products clearly revealed that the residual phosphazenium salts were considerably cytotoxic regardless of the anionic species, and that the cytotoxicity of more bulky t-BuP4 salt was higher than that of t-BuP2 salt. Such results have therefore put forward the necessity for removal of the catalyst residues from PEO-based polymers synthesized through phosphazene catalysis for bio-related applications, and for the development of less or non-toxic organocatalysts for such polymers.

TOF-SIMS Analysis of Crater Residues from Wild 2 Cometary on Stardust Aluminum Foil

Science.gov (United States)

Leutner, Jan; Stephan, Thomas; Kearsley, T.; Horz, Friedrich; Flynn, George J.; Sandford, Scott A.

2006-01-01

Impact residues of cometary particles on aluminum foils from the Stardust mission were investigated with TOF-SIMS for their elemental and organic composition. The residual matter from comet 81P/Wild 2 shows a wide compositional range, from nearly monomineralic grains to polymict aggregates. Despite the comparably small analyzed sample volume, the average element composition of the investigated residues is similar to bulk CI chondritic values. Analysis of organic components in impact residues is complicated, due to fragmentation and alteration of the compounds during the impact process and by the presence of contaminants on the aluminum foils. Nevertheless, polycyclic aromatic hydrocarbons (PAHs) that are unambiguously associated with the impact residues were observed, and thus are most likely of cometary origin.

Finite element concept to derive isostatic residual maps ...

Indian Academy of Sciences (India)

A new space-domain operator based on the shape function concept of finite element analysis has been developed to derive the ... not require explicit assumptions on isostatic models. Besides .... This information is implicit in the Bouguer ...

78 FR 20640 - Polychlorinated Biphenyls (PCBs); Recycling Plastics from Shredder Residue

Science.gov (United States)

2013-04-05

... (PCBs); Recycling Plastics from Shredder Residue AGENCY: Environmental Protection Agency (EPA). ACTION....gov or at the Office of Pollution Prevention and Toxics Docket (OPPT Docket), Environmental Protection... that would produce broad environmental benefits and increase global competitiveness (Ref. 2). ISRI...

Tratamento dos resíduos gerados na síntese de polianilina em escala pré-piloto Treatment of the residues generated by polyaniline synthesis in pre-pilot scale

Directory of Open Access Journals (Sweden)

Rafael Arromba de Sousa

2003-12-01

Full Text Available Polyaniline (PAni is one of the most studied conducting polymer. It can be synthesized by two methods: electrochemical or chemical oxidation. The chemical oxidation is more adequate to produce large quantities of polymer. Regardless of the synthesis scale, the treatment of the residues before its final destination is very important and necessary because it contains toxic aniline derivatives (carcinogens in some cases, acids and inorganic salts, both with low toxicity. In this work we discuss the methods used to treat these residues and to eliminate and discard the toxic substances. These were extracted from the reaction residues by using activated coal and the pH of the residue was neutralized.

Real-time patient-specific finite element analysis of internal stresses in the soft tissues of a residual limb: a new tool for prosthetic fitting.

Science.gov (United States)

Portnoy, S; Yarnitzky, G; Yizhar, Z; Kristal, A; Oppenheim, U; Siev-Ner, I; Gefen, A

2007-01-01

Fitting of a prosthetic socket is a critical stage in the process of rehabilitation of a trans-tibial amputation (TTA) patient, since a misfit may cause pressure ulcers or a deep tissue injury (DTI: necrosis of the muscle flap under intact skin) in the residual limb. To date, prosthetic fitting typically depends on the subjective skills of the prosthetist, and is not supported by biomedical instrumentation that allows evaluation of the quality of fitting. Specifically, no technology is presently available to provide real-time continuous information on the internal distribution of mechanical stresses in the residual limb during fitting of the prosthesis, or while using it and this severely limits patient evaluations. In this study, a simplified yet clinically oriented patient-specific finite element (FE) model of the residual limb was developed for real-time stress analysis. For this purpose we employed a custom-made FE code that continuously calculates internal stresses in the residual limb, based on boundary conditions acquired in real-time from force sensors, located at the limb-prosthesis interface. Validation of the modeling system was accomplished by means of a synthetic phantom of the residual limb, which allowed simultaneous measurements of interface pressures and internal stresses. Human studies were conducted subsequently in five TTA patients. The dimensions of bones and soft tissues were obtained from X-rays of the residual limb of each patient. An indentation test was performed in order to obtain the effective elastic modulus of the soft tissues of the residual limb. Seven force sensors were placed between the residual limb and the prosthetic liner, and subjects walked on a treadmill during analysis. Generally, stresses under the shinbones were approximately threefold higher than stresses at the soft tissues behind the bones. Usage of a thigh corset decreased the stresses in the residual limb during gait by approximately 80%. Also, the stresses

Residues from waste incineration. Final report

Energy Technology Data Exchange (ETDEWEB)

Astrup, T.; Juul Pedersen, A.; Hyks, J.; Frandsen, F.J.

2009-08-15

The overall objective of the project was to improve the understanding of the formation and characteristics of residues from waste incineration. This was done focusing on the importance of the waste input and the operational conditions of the furnace. Data and results obtained from the project have been discussed in this report according to the following three overall parts: i) mass flows and element distribution, ii) flue gas/particle partitioning and corrosion/deposition aspects, and iii) residue leaching. This has been done with the intent of structuring the discussion while tacitly acknowledging that these aspects are interrelated and cannot be separated. Overall, it was found that the waste input composition had significant impact of the characteristics of the generated residues. A similar correlation between operational conditions and residue characteristics could not be observed. Consequently, the project recommend that optimization of residue quality should focus on controlling the waste input composition. The project results showed that including specific waste materials (and thereby also excluding the same materials) may have significant effects on the residue composition, residue leaching, aerosol and deposit formation.It is specifically recommended to minimize Cl in the input waste. Based on the project results, it was found that a significant potential for optimization of waste incineration exist. (author)

Laser-induced breakdown spectroscopy and chemometrics for classification of toys relying on toxic elements

International Nuclear Information System (INIS)

Godoi, Quienly; Leme, Flavio O.; Trevizan, Lilian C.; Pereira Filho, Edenir R.; Rufini, Iolanda A.; Santos, Dario; Krug, Francisco J.

2011-01-01

Quality control of toys for avoiding children exposure to potentially toxic elements is of utmost relevance and it is a common requirement in national and/or international norms for health and safety reasons. Laser-induced breakdown spectroscopy (LIBS) was recently evaluated at authors' laboratory for direct analysis of plastic toys and one of the main difficulties for the determination of Cd, Cr and Pb was the variety of mixtures and types of polymers. As most norms rely on migration (lixiviation) protocols, chemometric classification models from LIBS spectra were tested for sampling toys that present potential risk of Cd, Cr and Pb contamination. The classification models were generated from the emission spectra of 51 polymeric toys and by using Partial Least Squares - Discriminant Analysis (PLS-DA), Soft Independent Modeling of Class Analogy (SIMCA) and K-Nearest Neighbor (KNN). The classification models and validations were carried out with 40 and 11 test samples, respectively. Best results were obtained when KNN was used, with corrected predictions varying from 95% for Cd to 100% for Cr and Pb.

Environmental Exposure of Children to Toxic Trace Elements (Hg, Cr, As) in an Urban Area of Yucatan, Mexico: Water, Blood, and Urine Levels.

Science.gov (United States)

Arcega-Cabrera, F; Fargher, L; Quesadas-Rojas, M; Moo-Puc, R; Oceguera-Vargas, I; Noreña-Barroso, E; Yáñez-Estrada, L; Alvarado, J; González, L; Pérez-Herrera, N; Pérez-Medina, S

2018-05-01

Merida is the largest urban center in the Mexican State of Yucatan. Here domestic sewage is deposited in poorly built septic tanks and is not adequately treated. Because of contamination from such waste, water from the top 20 m of the aquifer is unsuitable for human consumption. Given this situation and because children are highly vulnerable to environmental pollution, including exposure to toxic trace elements, this study focused on evaluating the exposure of children to arsenic (As), chromium (Cr), and mercury (Hg) in water. It also evaluated the relationship between the levels of these elements in water and their concentrations in urine and blood. Among the 33 children monitored in the study, arsenic surpassed WHO limits for blood in 37% of the cases, which could result from the ingestion of poultry contaminated with organoarsenic compounds. In the case of WHO limits for Mercury, 65% of the water samples analyzed, 28% of urine samples, and 12% of blood samples exceeded them. Mercury exposure was correlated with biological sex, some lifestyle factors, and the zone in Merida in which children live. These data suggest that the levels of some toxic metals in children may be affected by water source, socioeconomic factors, and individual behavior.

Evaluation of the concentration of toxic metals and rare ground elements in samples of sediments of the Billings and Guarapiranga systems reservoirs

International Nuclear Information System (INIS)

Silva, Larissa de Souza

2017-01-01

The excessive urbanization process of the Sao Paulo Metropolitan Region resulted in the loss of the natural characteristics of its water courses causing serious changes in flow and quality regimes. The objective of this study was evaluate the concentration of toxic metals, semi metals As, Sb and Se, and rare earth elements present in surface sediment samples collected at the Billings, Guarapiranga and Rio Grande Reservoirs. The Ag, Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Sb, Se and Zn elements were analyzed using Optical Emission Spectrometry With Inductively Coupled Plasma (ICP OES). Some major, trace and rare earth elements (Ce, Eu, La, Lu, Nd, Sm, Tb and Yb) were analyzed by the Instrumental Neutron Activation Analysis (INAA) technique. The total Hg concentration was determined by Cold Vapor Atomic Absorption Spectrometry technique (CVAAS). The validation of the methodologies was performed by means of the certified reference material analyses. To assess the sources of anthropogenic contamination, the enrichment factor (EF) and the geoaccumulation index (IGeo) were calculated. The results obtained for both techniques were compared with TEL and PEL oriented values established by CCME (Canadian Council of Ministers of the Environment) and adopted by CETESB (Environmental Company of the Sao Paulo State). All sampling points showed concentration values for toxic metals >TEL and 2 points at Billings Reservoir (BILL02030 and 02100), values > PEL for As, Cr, Cu, Hg, Ni, Pb and Zn, probably due to the entrance of the Pinheiros River waters and drainage basins of the Cocaia and Borore streams. The calculated EF and IGeo values indicated possible anthropogenic contamination for Sb and Se for the elements determined by ICP OES and As, Cr, Sb and Zn, obtained by INAA. The Billings reservoir presented, in general, the highest concentrations for the analyzed elements, indicating a poor quality of its sediments. This study confirms the need of a frequent

Potentially toxic elements (PTEs) in soils from the surroundings of the Trans-Amazonian Highway, Brazil.

Science.gov (United States)

de Souza, Edna Santos; Fernandes, Antonio Rodrigues; de Souza Braz, Anderson Martins; Sabino, Lorena Lira Leite; Alleoni, Luís Reynaldo Ferracciú

2015-01-01

The Trans-Amazonian Highway (TAH) is located in the northern region of Brazil, comprising a border region where agricultural, mining, and logging activities are the main activities responsible for fostering economic development, in addition to large hydroelectric plants. Such activities lead to environmental contamination by potentially toxic elements (PTEs). Environmental monitoring is only possible through the determination of element contents under natural conditions. Many extraction methods have been proposed to determine PTEs' bioavailability in the soil; however, there is no consensus about which extractor is most suitable. In this study, we determined the contents of PTEs in soils in the surroundings of TAH after mineral extraction with diethylenetriaminepentaacetic acid-triethanolamine (DTPA-TEA), Mehlich I, and Mehlich III solutions. Soil samples were collected in areas of natural vegetation in the vicinity of TAH in the state of Pará, Brazil. Chemical attributes and particle size were determined, besides concentrations of Fe, Al, Mn, and Ti by sulfuric acid digestion, Si after alkaline solution attack, and poorly crystalline Fe, Al, and "free" Fe oxides. Mehlich III solution extracted greater contents from Fe, Al, and Pb as compared to Mehlich I and DTPA-TEA and similar contents from Cd, Mn, Zn, and Cu. Significant correlations were found between concentrations of PTEs and the contents of Fe and Mn oxides as well as organic carbon and soil cation exchange capacity. Contents of Cu, Mn, Fe, and Zn by the three methods were positively correlated.

Rapid multi-residue method for the determination of pesticide ...

African Journals Online (AJOL)

Exposure to pesticides can represent a potential risk to humans. Agricultural workers are at risk of chronic toxicity. Hence, the evaluation of pesticide residues in their blood gives an indication about the extent of exposure and help in assessing adverse health effects. The aim of our study was to develop analytical method for ...

Evaluation of the use of human hair for biomonitoring the deficiency of essential and exposure to toxic elements

International Nuclear Information System (INIS)

Rodrigues, Jairo L.; Batista, Bruno L.; Nunes, Juliana A.; Passos, Carlos J.S.; Barbosa, Fernando

2008-01-01

Monitoring the nutritional status of essential elements and assessing exposure of individuals to toxic elements is of great importance for human health. Thus, the appropriate selection and measurement of biomarkers of internal dose is of critical importance. Due to their many advantages, hair samples have been widely used to assess human exposure to different contaminants. However, the validity of this biomarker in evaluating the level of trace elements in the human body is debatable. In the present study, we evaluated the relationship between levels of trace elements in hair and whole blood or plasma in a Brazilian population. Hair, blood and plasma were collected from 280 adult volunteers for metal determination. An ICP-MS was used for sample analysis. Manganese, copper, lead and strontium levels in blood varied from 5.1 to 14.7, from 494.8 to 2383.8, from 5.9 to 330.1 and from 11.6 to 87.3 μg/L, respectively. Corresponding levels in hair varied from 0.05 to 6.71, from 0.02 to 37.59, from 0.02 to 30.63 and from 0.9 to 12.6 μg/g. Trace element levels in plasma varied from 0.07 to 8.62, from 118.2 to 1577.7 and from 2.31 to 34.2 μg/L for Mn, Cu and Sr, respectively. There was a weak correlation (r = 0.22, p < 0.001) between lead levels in hair and blood. Moreover, copper and strontium levels in blood correlate with those levels in plasma (r = 0.64 , p < 0.001 for Cu) and (r = 0.22, p < 0.05 for Sr). However, for Cu, Mn and Sr there was no correlation between levels in hair and blood. Our findings suggest that while the idea of measuring trace elements in hair is attractive, hair is not an appropriate biomarker for evaluating Cu, Mn and Sr deficiency or Pb exposure

Evaluation of the use of human hair for biomonitoring the deficiency of essential and exposure to toxic elements

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Jairo L.; Batista, Bruno L.; Nunes, Juliana A.; Passos, Carlos J.S. [Laboratorio de Toxicologia e Essencialidade de Metais, Depto. de Analises Clinicas, Toxicologicas e Bromatologicas, Faculdade de Ciencias Farmaceuticas de Ribeirao Preto-USP, Avenida do Cafe s/n, Monte Alegre, 14040-903, Ribeirao Preto-SP (Brazil); Barbosa, Fernando [Laboratorio de Toxicologia e Essencialidade de Metais, Depto. de Analises Clinicas, Toxicologicas e Bromatologicas, Faculdade de Ciencias Farmaceuticas de Ribeirao Preto-USP, Avenida do Cafe s/n, Monte Alegre, 14040-903, Ribeirao Preto-SP (Brazil)], E-mail: fbarbosa@fcfrp.usp.br

2008-11-01

Monitoring the nutritional status of essential elements and assessing exposure of individuals to toxic elements is of great importance for human health. Thus, the appropriate selection and measurement of biomarkers of internal dose is of critical importance. Due to their many advantages, hair samples have been widely used to assess human exposure to different contaminants. However, the validity of this biomarker in evaluating the level of trace elements in the human body is debatable. In the present study, we evaluated the relationship between levels of trace elements in hair and whole blood or plasma in a Brazilian population. Hair, blood and plasma were collected from 280 adult volunteers for metal determination. An ICP-MS was used for sample analysis. Manganese, copper, lead and strontium levels in blood varied from 5.1 to 14.7, from 494.8 to 2383.8, from 5.9 to 330.1 and from 11.6 to 87.3 {mu}g/L, respectively. Corresponding levels in hair varied from 0.05 to 6.71, from 0.02 to 37.59, from 0.02 to 30.63 and from 0.9 to 12.6 {mu}g/g. Trace element levels in plasma varied from 0.07 to 8.62, from 118.2 to 1577.7 and from 2.31 to 34.2 {mu}g/L for Mn, Cu and Sr, respectively. There was a weak correlation (r = 0.22, p < 0.001) between lead levels in hair and blood. Moreover, copper and strontium levels in blood correlate with those levels in plasma (r = 0.64 , p < 0.001 for Cu) and (r = 0.22, p < 0.05 for Sr). However, for Cu, Mn and Sr there was no correlation between levels in hair and blood. Our findings suggest that while the idea of measuring trace elements in hair is attractive, hair is not an appropriate biomarker for evaluating Cu, Mn and Sr deficiency or Pb exposure.

Bioavailability of potentially toxic elements in soil-grapevine (leaf, skin, pulp and seed) system and environmental and health risk assessment.

Science.gov (United States)

Milićević, Tijana; Urošević, Mira Aničić; Relić, Dubravka; Vuković, Gordana; Škrivanj, Sandra; Popović, Aleksandar

2018-06-01

Monitoring of potentially toxic elements in agricultural soil represents the first measure of caution regarding food safety, while research into element bioavailability should be a step forward in understanding the element transportation chain. This study was conducted in the grapevine growing area ("Oplenac Wine Route") for investigating element bioavailability in the soil-grapevine system accompanied by an assessment of the ecological implications and human health risk. Single extraction procedures (CH 3 COOH, Na 2 EDTA, CaCl 2 , NH 4 NO 3 and deionised H 2 O) and digestion were performed to estimate the bioavailability of 22 elements (Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Sb, Sr, V and Zn) from the topsoil (0-30 cm) and subsoil (30-60 cm) to the grapevine parts (leaf, skin, pulp and seed) and wine. The extractants were effective comparing to the pseudo-total concentrations in following order Na 2 EDTA ˃ CH 3 COOH ˃ NH 4 NO 3  ˃ CaCl 2 , H 2 O 2 h and 16 h. The most suitable extractants for assessing the bioavailability of the elements from the soil to the grapevine parts were CaCl 2 , NH 4 NO 3 and Na 2 EDTA, but deionised H 2 O could be suitable, as well. The results showed that Ba was the most bioavailable element in the soil-grapevine system. Contamination factor implied a moderate contamination (1  1), the influence of atmospheric deposition on the aerial grapevine parts (leaves and grape skin) was observed. Nevertheless, low adverse health risk effects (HI wine consumers. Copyright © 2018 Elsevier B.V. All rights reserved.

Analytical and Experimental Study of Residual Stresses in CFRP

Directory of Open Access Journals (Sweden)

Chia-Chin Chiang

2013-01-01

Full Text Available Fiber Bragg Grating sensors (FBGs have been utilized in various engineering and photoelectric fields because of their good environment tolerance. In this research, residual stresses of carbon fiber reinforced polymer composites (CFRP were studied using both experimental and analytical approach. The FBGs were embedded inside middle layers of CFRP to study the formation of residual stress during curing process. Finite element analysis was performed using ABAQUS software to simulate the CFRP curing process. Both experimental and simulation results showed that the residual stress appeared during cooling process and the residual stresses could be released when the CFRP was machined to a different shape.

[Sulfur dioxide limit standard and residues in Chinese medicinal materials].

Science.gov (United States)

Kang, Chuan-Zhi; Yang, Wan-Zhen; Mo, Ge; Zhou, Li; Jiang, Jing-Yi; Lv, Chao-Geng; Wang, Sheng; Zhou, Tao; Yang, Ye; Guo, Lan-Ping

2018-01-01

The traditional sulfur fumigation processing method has been widely used in the initial processing and storage of traditional Chinese medicinal materials due to its economy, efficiency, convenience, high operability and effect on mold and insect prevention. However, excessive sulfur fumigation of traditional Chinese medicinal materials would lead to the changes in chemical compositions, and even endanger human health. This study showed that traditional Chinese medicinal materials were sulfur fumigated directly after being harvested for quick drying, or fumigated after being weted in the storage process for preventing mold and insects. We found that the sulfur dioxide limits for traditional Chinese medicinal materials were stricter than those for foods. Based on the existing limit standards, we obtained the data of sulfur dioxide residues for 35 types of traditional Chinese medicinal materials in a total of 862 batches. According to the limit standard in the Chinese Pharmacopoeia (150， 400 mg·kg⁻¹), the average over-standard rate of sulfur dioxide was as high as 52.43%, but it was reduced to 29.47% if calculated based on the limit for vegetable additive standard (500 mg·kg⁻¹). Sulfur fumigation issue shall be considered correctly: sulfur dioxide is a type of low toxic substance and less dangerous than aflatoxin and other highly toxic substances, and a small amount of residue would not increase the toxicity of traditional Chinese medicinal materials. However, sulfur fumigation might change the content of chemical substances and affect the quality of traditional Chinese medicinal materials. Furthermore, the exposure hazards of toxic substances are comprehensively correlated with exposure cycle, exposure frequency, and application method. In conclusion, it is suggested to strengthen the studies on the limit standard of traditional Chinese medicinal materials, formulate practical and feasible limit standard for sulfur dioxide residues in traditional Chinese

Toxicity of oils and petroleum hydrocarbons to estuarine crustaceans

Energy Technology Data Exchange (ETDEWEB)

Tatem, H.E. (Army Engineer Waterways Experiment Station, Vicksburg, MS); Cox, B.A.; Anderson, J.W.

1978-04-01

Bioassay experiments with various life stages of three estuarine shrimp and soluble petroleum hydrocarbons (PH) revealed residual Bunker C oil and refined No. 2 fuel oil to be more toxic than two crude oils tested. Larvae of Palaemonetes pugio were slightly more sensitive to the PH than adults, while young penaeid shrimp were shown to be more resistant than older, larger individuals. Shrimp exposed to PH in conjunction with temperature and salinity changes were more susceptible to the PH. Some common aromatic and diaromatic PH, including three naphthalene compounds, were utilized in bioassays. Naphthalenes were highly toxic. The toxicity of petroleum products is closely related to aromatic hydrocarbon content, especially the naphthalenes and related hydrocarbons.

Fluorescent bioassays for toxic metals in milk and yoghurt

Science.gov (United States)

2012-01-01

Background From a human health viewpoint, contaminated milk and its products could be a source of long-term exposure to toxic metals. Simple, inexpensive, and on-site assays would enable constant monitoring of their contents. Bioassays that can measure toxic metals in milk or yoghurt might reduce the risk. For this purpose, the green fluorescent protein (GFP)-tagged trans factors, ArsR-GFP and CadC-GFP, together with their cis elements were used to develop such bioassays. Results ArsR-GFP or CadC-GFP, which binds either toxic metal or DNA fragment including cis element, was directly mixed with cow’s milk or yoghurt within a neutral pH range. The fluorescence of GFP, which is reflected by the association/dissociation ratio between cis element and trans factor, significantly changed with increasing externally added As (III) or Cd (II) whereas smaller responses to externally added Pb (II) and Zn (II) were found. Preparation and dilution of whey fraction at low pH were essential to intrinsic zinc quantification using CadC-GFP. Using the extraction procedure and bioassay, intrinsic Zn (II) concentrations ranging from 1.4 to 4.8 mg/l for milk brands and from 1.2 to 2.9 mg/kg for yoghurt brands were determined, which correlated to those determined using inductively coupled plasma atomic emission spectroscopy. Conclusions GFP-tagged bacterial trans factors and cis elements can work in the neutralized whole composition and diluted whey fraction of milk and yoghurt. The feature of regulatory elements is advantageous for establishment of simple and rapid assays of toxic metals in dairy products. PMID:23098077

Fluorescent bioassays for toxic metals in milk and yoghurt

Directory of Open Access Journals (Sweden)

Siddiki Mohammad Shohel

2012-10-01

Full Text Available Abstract Background From a human health viewpoint, contaminated milk and its products could be a source of long-term exposure to toxic metals. Simple, inexpensive, and on-site assays would enable constant monitoring of their contents. Bioassays that can measure toxic metals in milk or yoghurt might reduce the risk. For this purpose, the green fluorescent protein (GFP-tagged trans factors, ArsR-GFP and CadC-GFP, together with their cis elements were used to develop such bioassays. Results ArsR-GFP or CadC-GFP, which binds either toxic metal or DNA fragment including cis element, was directly mixed with cow’s milk or yoghurt within a neutral pH range. The fluorescence of GFP, which is reflected by the association/dissociation ratio between cis element and trans factor, significantly changed with increasing externally added As (III or Cd (II whereas smaller responses to externally added Pb (II and Zn (II were found. Preparation and dilution of whey fraction at low pH were essential to intrinsic zinc quantification using CadC-GFP. Using the extraction procedure and bioassay, intrinsic Zn (II concentrations ranging from 1.4 to 4.8 mg/l for milk brands and from 1.2 to 2.9 mg/kg for yoghurt brands were determined, which correlated to those determined using inductively coupled plasma atomic emission spectroscopy. Conclusions GFP-tagged bacterial trans factors and cis elements can work in the neutralized whole composition and diluted whey fraction of milk and yoghurt. The feature of regulatory elements is advantageous for establishment of simple and rapid assays of toxic metals in dairy products.

Residual toxicity in hematopoietic cells following a single dose of methylnitrosourea

Energy Technology Data Exchange (ETDEWEB)

Inoue, T.; Cronkite, E.P.; Commerford, S.L.; Carsten, A.L.

1984-01-01

The residual injury to the proliferation capability of hemopoietic stem cells (CFU-S) which results from their exposure to leukemogenic agents was evaluated in mice given a single leukemogenic dose of methol nitrosourea. Bone marrow cellularity, splenic weight, number of CFU-S and the proportion of cycling to noncycling CFU-S were measured in an effort to detect acute and residual injury to the CFU-S from mice given MNU 21 and 3 days earlier. Marrow cells were also transferred into lethally irradiated mice to observe the self-renewal capability of the CFU-S in the recipient spleen and bone marrow. The results of these measurements show that the CFU-S in marrow from mice given 50 mg/kg of MNU 21 days earlier still have a defective ability for self-renewal, although the total cellularity, number of CFU-S and proportion of cycling and noncycling CFU-S in the donor have returned to the normal range. The relationship of this self-renewal defect to the development of leukemia after this leukemogenic dose of MNU is not known. 21 references, 9 figures, 3 tables.

[Monitoring and assessment contamination of toxic elements food in Tatarstan monitoring and evaluation of contamination by toxic elements of food products in the territory of the Republic of Tatarstan].

Science.gov (United States)

Frolova, O A; Karpova, M V; Makhmutova, I P; Musin, R A

2014-01-01

Actual consumption of toxic elements in the body of an adult human in the Republic of Tatarstan (during the period of the study of the production in 2008-2012) amounts for lead: 0.68 mg/week for cadmium: 0.18 mg/day, arsenic: 0.68 mg/day, mercury: 0.21 mg/week (per 1 kg body weight) or respectively: 22.81%, 18.0%, 13.69%, 4.27% of the allowable levels of the chemical load. We have performed calculations with account of the balance of food resources per capita per year in the Republic of Tatarstan. This analysis showed that the main dietary sources of income for cadmium there are milk and dairy products (48.32%), bakery products (16.07%), meat and meat products (13.22%); for lead there are bakely products (26.85%), potatoes (24.36%), milk and dairy products (23.94%), meat and meat products (7.55%); for mercury there are milk and dairy products (53.72%), meat and meat products (16.82%), potatoes (10.92%); fish and fish products (4.74%); for arsenic there are milk and dairy products (72.51%), meat and meat products (12.8%), bakery products (3.05% ,); fish and fish products (2.23%). It is important to know not only what products are the most contaminated, but what place in the structure of the nutrition they take.

Effects of biochar and greenwaste compost amendments on mobility, bioavailability and toxicity of inorganic and organic contaminants in a multi-element polluted soil

Energy Technology Data Exchange (ETDEWEB)

Beesley, Luke, E-mail: L.Beesley@2007.ljmu.ac.u [Faculty of Science, Liverpool John Moores University, Liverpool L3 3AF (United Kingdom); Moreno-Jimenez, Eduardo [Departamento de Quimica Agricola, Universidad Autonoma de Madrid, 28049 Madrid (Spain); Gomez-Eyles, Jose L. [University of Reading, Department of Soil Science, Whiteknights, Reading RG6 6DW (United Kingdom)

2010-06-15

Applying amendments to multi-element contaminated soils can have contradictory effects on the mobility, bioavailability and toxicity of specific elements, depending on the amendment. Trace elements and PAHs were monitored in a contaminated soil amended with biochar and greenwaste compost over 60 days field exposure, after which phytotoxicity was assessed by a simple bio-indicator test. Copper and As concentrations in soil pore water increased more than 30 fold after adding both amendments, associated with significant increases in dissolved organic carbon and pH, whereas Zn and Cd significantly decreased. Biochar was most effective, resulting in a 10 fold decrease of Cd in pore water and a resultant reduction in phytotoxicity. Concentrations of PAHs were also reduced by biochar, with greater than 50% decreases of the heavier, more toxicologically relevant PAHs. The results highlight the potential of biochar for contaminated land remediation. - Biochar was more effective than greenwaste compost at reducing bioavailable fractions of phytotoxic Cd and Zn as well as the heavier, more toxicologically relevant PAHs.

Assessment of pesticide residues and trace element contamination ...

African Journals Online (AJOL)

ajl10

It was based on the chemical analyses of soil, water and vegetable samples. ... of the fine fraction (under 2 mm) were conserved away from light for ... To assess the migration and accumulation of trace elements ..... metals from sewage sludge in an agricultural soil. ... Pesticides and heavy metals in drinking water, soils.

On the role of the residual stress state in product manufacturing

NARCIS (Netherlands)

Zijlstra, G.; Groen, M.; Post, J.; Ocelik, V.; de Hosson, J.Th.M.

2016-01-01

This paper concentrates on the effect of the residual stress state during product manufacturing of AISI 420 steel on the final shape of the product. The work includes Finite Element (FE) calculations of the distribution of the residual stresses after metal forming and a heat treatment. The evolution

Radioactivity and trace element contents of commercial chewing tobacco

International Nuclear Information System (INIS)

Dafauti, S.; Pulhani, V.; Dahiya, S.; Hegde, A.G.

2007-01-01

Radioactive elements uranium, thorium and their daughters are present ubiquitously in the environment and are transferred to man through various pathways. Both, U and Th can cause radiological and toxic hazards. The ingestion dose pathway calculations involve analysis of all kinds of food or edible materials. A large population in India and Asian subcontinent are addicted to commercially available chewing tobacco. This practice is reported to have lead to increased consequences of cancer. Trace elements (Fe, Co, Mn, Zn etc.) are essential but may also prove to be toxic if present in excess. Besides these the hazards of heavy elements like Pb and Cd have also increased in the current polluted environment. In this study most of the commercially available brands of gutkha and chewing tobacco were collected. The radioactive elements U and Th were analyzed in them by Radiochemical Neutron Activation Analysis technique. Trace elements Fe, Co, Mn, Zn, and toxic heavy elements Pb, Cd, Ni etc. were analyzed by Atomic Absorption Spectrophotometry. The levels of Th and U were in the range 0.02-0.11 mg/g and 0.02-0.08 mg/g respectively. The cancer risk due to U, Th, Pb and Cd were calculated and are found to be low. (author)

Evaluation of toxic metals and essential elements in children with learning disabilities from a rural area of southern Brazil.

Science.gov (United States)

do Nascimento, Sabrina Nunes; Charão, Mariele Feiffer; Moro, Angela Maria; Roehrs, Miguel; Paniz, Clovis; Baierle, Marília; Brucker, Natália; Gioda, Adriana; Barbosa, Fernando; Bohrer, Denise; Ávila, Daiana Silva; Garcia, Solange Cristina

2014-10-17

Children's exposure to metals can result in adverse effects such as cognitive function impairments. This study aimed to evaluate some toxic metals and levels of essential trace elements in blood, hair, and drinking water in children from a rural area of Southern Brazil. Cognitive ability and δ-aminolevulinate dehydratase (ALA-D) activity were evaluated. Oxidative stress was evaluated as a main mechanism of metal toxicity, through the quantification of malondialdehyde (MDA) levels. This study included 20 children from a rural area and 20 children from an urban area. Our findings demonstrated increase in blood lead (Pb) levels (BLLs). Also, increased levels of nickel (Ni) in blood and increase of aluminum (Al) levels in hair and drinking water in rural children were found. Deficiency in selenium (Se) levels was observed in rural children as well. Rural children with visual-motor immaturity presented Pb levels in hair significantly increased in relation to rural children without visual-motor immaturity (p < 0.05). Negative correlations between BLLs and ALA-D activity and positive correlations between BLLs and ALA-RE activity were observed. MDA was significantly higher in rural compared to urban children (p < 0.05). Our findings suggest that rural children were co-exposed to toxic metals, especially Al, Pb and Ni. Moreover, a slight deficiency of Se was observed. Low performance on cognitive ability tests and ALA-D inhibition can be related to metal exposure in rural children. Oxidative stress was suggested as a main toxicological mechanism involved in metal exposure.

Evaluation of Toxic Metals and Essential Elements in Children with Learning Disabilities from a Rural Area of Southern Brazil

Directory of Open Access Journals (Sweden)

Sabrina Nunes do Nascimento

2014-10-01

Full Text Available Children’s exposure to metals can result in adverse effects such as cognitive function impairments. This study aimed to evaluate some toxic metals and levels of essential trace elements in blood, hair, and drinking water in children from a rural area of Southern Brazil. Cognitive ability and δ-aminolevulinate dehydratase (ALA-D activity were evaluated. Oxidative stress was evaluated as a main mechanism of metal toxicity, through the quantification of malondialdehyde (MDA levels. This study included 20 children from a rural area and 20 children from an urban area. Our findings demonstrated increase in blood lead (Pb levels (BLLs. Also, increased levels of nickel (Ni in blood and increase of aluminum (Al levels in hair and drinking water in rural children were found. Deficiency in selenium (Se levels was observed in rural children as well. Rural children with visual-motor immaturity presented Pb levels in hair significantly increased in relation to rural children without visual-motor immaturity (p < 0.05. Negative correlations between BLLs and ALA-D activity and positive correlations between BLLs and ALA-RE activity were observed. MDA was significantly higher in rural compared to urban children (p < 0.05. Our findings suggest that rural children were co-exposed to toxic metals, especially Al, Pb and Ni. Moreover, a slight deficiency of Se was observed. Low performance on cognitive ability tests and ALA-D inhibition can be related to metal exposure in rural children. Oxidative stress was suggested as a main toxicological mechanism involved in metal exposure.

Measurement of toxic elements in infant food supplements marketed in Iran (short comunication

Directory of Open Access Journals (Sweden)

M. A. Mehrnia

2017-02-01

Full Text Available Due to similarities with breast-feeding, baby food is used as a partial replacement for babies between 6 to 12 months of age. In this study, five samples of famous infant food supplement consisting of three types from Ghoncheh company (rice with milk, wheat with milk, almond porridge and two types from Nestle company (wheat and milk, and banana and wheat with milk were prepared. Samples were digested with nitric acid and the concentrations of cadmium, lead, manganese, molybdenum and nickel were analyzed. In addition, the estimated daily intake (EDI index for all samples was calculated and compared with tolerable daily intake (TDI index. The minimum and maximum concentration of cadmium was found in the sample with rice + milk formula (40.3 µg/kg and infant food supplements containing wheat + milk (58.0 µgr/kg, respectively. The amount of cadmium, lead, manganese, molybdenum and nickel were estimated in the range of 40.3-58.0 ppb, 31.85 ppb, 2.3-4.9 ppm, 417.9-518.8 ppb and 4479.1-6415.0 ppb, respectively. In was concluded that the amount of toxic elements in infant foods marketed in Iran were found below the maximum limit.

Advances in Nonylphenols Residues and Their Behaviors in Soil

Directory of Open Access Journals (Sweden)

ZHANG Ting-yu

2014-04-01

Full Text Available Nonylphenol, a kind of substances similar to environmental hormone, has biological toxicity, and prevalent in various environ-mental media, such as water, sludge and sediment. It can pose a threat to food safety, but we still lack of knowledge about the residual level of nonylphenol in soil. In this paper, the sources and residual status of nonylphenol in soil and other environmental media were summarized. The behavior processes of nonylphenol in soil were also analyzed, including adsorption and desorption, metabolic degradation, leaching and mi-gration, etc. Future work were also proposed to provide reference for further soil pollution survey and evaluation studies.

Radionuclides in the investigation of the circulation of toxic metals in the environment

International Nuclear Information System (INIS)

Stary, J.; Zeman, A.; Kratzer, K.; Prasilova, J.

1982-01-01

Radionuclides of chromium(III) and (VI), zinc, cadmium, inorganic mercury(II), methylmercury and phenylmercury were used for the investigation of the cumulation of these toxic elements or compounds in algae and fish in different experimental conditions in order to describe quantitatively the processes occurring in nature. Cumulation factors of different chemical forms of elements studied were determined for algae as were biological half-times for fish which allowed the calculation of the maximum concentration of toxic elements in fish. (author)

Contribution of waste water treatment plants to pesticide toxicity in agriculture catchments.

Science.gov (United States)

Le, Trong Dieu Hien; Scharmüller, Andreas; Kattwinkel, Mira; Kühne, Ralph; Schüürmann, Gerrit; Schäfer, Ralf B

2017-11-01

Pesticide residues are frequently found in water bodies and may threaten freshwater ecosystems and biodiversity. In addition to runoff or leaching from treated agricultural fields, pesticides may enter streams via effluents from wastewater treatment plants (WWTPs). We compared the pesticide toxicity in terms of log maximum Toxic Unit (log mTU) of sampling sites in small agricultural streams of Germany with and without WWTPs in the upstream catchments. We found an approximately half log unit higher pesticide toxicity for sampling sites with WWTPs (p pesticide toxicity in streams with WWTPs. A few compounds (diuron, terbuthylazin, isoproturon, terbutryn and Metazachlor) dominated the herbicide toxicity. Pesticide toxicity was not correlated with upstream distance to WWTP (Spearman's rank correlation, rho = - 0.11, p > 0.05) suggesting that other context variables are more important to explain WWTP-driven pesticide toxicity. Our results suggest that WWTPs contribute to pesticide toxicity in German streams. Copyright © 2017 Elsevier Inc. All rights reserved.

Development of thresholds of excess toxicity for environmental species and their application to identification of modes of acute toxic action.

Science.gov (United States)

Li, Jin J; Zhang, Xu J; Yang, Yi; Huang, Tao; Li, Chao; Su, Limin; Zhao, Yuan H; Cronin, Mark T D

2018-03-01

The acute toxicity of organic pollutants to fish, Daphnia magna, Tetrahymena pyriformis, and Vibrio fischeri was investigated. The results indicated that the Toxicity Ratio (TR) threshold of log TR =1, which has been based on the distribution of toxicity data to fish, can also be used to discriminate reactive or specifically acting compounds from baseline narcotics for Daphnia magna and Vibrio fischeri. A log TR=0.84 is proposed for Tetrahymena pyriformis following investigation of the relationships between the species sensitivity and the absolute averaged residuals (AAR) between the predicted baseline toxicity and the experimental toxicity. Less inert compounds exhibit relatively higher toxicity to the lower species (Tetrahymena pyriformis and Vibrio fischeri) than the higher species (fish and Daphnia magna). A greater number of less inert compounds with log TR greater than the thresholds was observed for Tetrahymena pyriformis and Vibrio fischeri. This may be attributed to the hydrophilic compounds which may pass more easily through cell membranes than the skin or exoskeleton of organisms and have higher bioconcentration factors in the lower species, leading to higher toxicity. Most of classes of chemical associated with excess toxicity to one species also exhibited excess toxicity to other species, however, a few classes with excess toxicity to one species exhibiting narcotic toxicity to other species and thus may have different MOAs between species. Some ionizable compounds have log TR much lower than one because of the over-estimated log K OW . The factors that influence the toxicity ratio calculated from baseline level are discussed in this paper. Copyright © 2017 Elsevier B.V. All rights reserved.

Modulation of prion polymerization and toxicity by rationally designed peptidomimetics.

Science.gov (United States)

Srivastava, Ankit; Sharma, Sakshi; Sadanandan, Sandhya; Gupta, Sakshi; Singh, Jasdeep; Gupta, Sarika; Haridas, V; Kundu, Bishwajit

2017-01-01

Misfolding and aggregation of cellular prion protein is associated with a large array of neurological disorders commonly called the transmissible spongiform encephalopathies. Designing inhibitors against prions has remained a daunting task owing to limited information about mechanism(s) of their pathogenic self-assembly. Here, we explore the anti-prion properties of a combinatorial library of bispidine-based peptidomimetics (BPMs) that conjugate amino acids with hydrophobic and aromatic side chains. Keeping the bispidine unit unaltered, a series of structurally diverse BPMs were synthesized and tested for their prion-modulating properties. Administration of Leu- and Trp-BPMs delayed and completely inhibited the amyloidogenic conversion of human prion protein (HuPrP), respectively. We found that each BPM induced the HuPrP to form unique oligomeric nanostructures differing in their biophysical properties, cellular toxicities and response to conformation-specific antibodies. While Leu-BPMs were found to stabilize the oligomers, Trp-BPMs effected transient oligomerization, resulting in the formation of non-toxic, non-fibrillar aggregates. Yet another aromatic residue, Phe, however, accelerated the aggregation process in HuPrP. Molecular insights obtained through MD (molecular dynamics) simulations suggested that each BPM differently engages a conserved Tyr 169 residue at the α2-β2 loop of HuPrP and affects the stability of α2 and α3 helices. Our results demonstrate that this new class of molecules having chemical scaffolds conjugating hydrophobic/aromatic residues could effectively modulate prion aggregation and toxicity. © 2017 The Author(s); published by Portland Press Limited on behalf of the Biochemical Society.

Thallium toxicity in humans.

Science.gov (United States)

Cvjetko, Petra; Cvjetko, Ivan; Pavlica, Mirjana

2010-03-01

Thallium is a naturally occurring trace element, widely distributed in the earth's crust, but at very low concentrations. It does not have a known biological use and does not appear to be an essential element for life. It has been considered one of the most toxic heavy metals.Occasionally, there are reports on thallium poisoning as results of suicide or murder attempt or accident. The main threat to humans is through occupational exposure, environmental contamination, and accumulation in food, mainly in vegetables grown on contaminated soil. Increasing use in emerging new technologies and demanding high-tech industry constantly raise concern about exposure risk to all living organisms. Thallium is considered a cumulative poison that can cause adverse health effects and degenerative changes in many organs. The effects are the most severe in the nervous system. The exact mechanism of thallium toxicity still remains unknown, although impaired glutathione metabolism, oxidative stress, and disruption of potassium-regulated homeostasis may play a role. The lack of data about mutagenic, carcinogenic, or teratogenic effects of thallium compounds in humans calls for further research.

Stresses in Circular Plates with Rigid Elements

Science.gov (United States)

Velikanov, N. L.; Koryagin, S. I.; Sharkov, O. V.

2018-05-01

Calculations of residual stress fields are carried out by numerical and static methods, using the flat cross-section hypothesis. The failure of metal when exposed to residual stresses is, in most cases, brittle. The presence in the engineering structures of rigid elements often leads to the crack initiation and structure failure. This is due to the fact that rigid elements under the influence of external stresses are stress concentrators. In addition, if these elements are fixed by welding, the residual welding stresses can lead to an increase in stress concentration and, ultimately, to failure. The development of design schemes for such structures is a very urgent task for complex technical systems. To determine the stresses in a circular plate with a welded circular rigid insert under the influence of an external load, one can use the solution of the plane stress problem for annular plates in polar coordinates. The polar coordinates of the points are the polar radius and the polar angle, and the stress state is determined by normal radial stresses, tangential and shearing stresses. The use of the above mentioned design schemes, formulas, will allow more accurate determination of residual stresses in annular welded structures. This will help to establish the most likely directions of failure and take measures at the stages of designing, manufacturing and repairing engineering structures to prevent these failures. However, it must be taken into account that the external load, the presence of insulation can lead to a change in the residual stress field.

Study of the degradation performance (TOC, BOD, and toxicity) of bisphenol A by the photo-Fenton process.

Science.gov (United States)

Pérez-Moya, M; Kaisto, T; Navarro, M; Del Valle, L J

2017-03-01

Degradation of bisphenol A (BPA, 0.5 L, 30 mg L -1 ) was studied by photo-Fenton treatment, while Fenton reagents were variables. The efficiency of the degradation process was evaluated by the reduction of total organic carbon (TOC), the biochemical oxygen demand (BOD), and toxicity. For toxicity analysis, bacterial methods were found infeasible, but the in vitro assay of VERO cells culture was successfully applied. Experiments according to a 2 2 design of experiments (DOE) with star points and three center points for statistical validity allowed selecting those process conditions (Fe(II) and H 2 O 2 load) that maximized the process performance. Photo-Fenton process effectively eliminated BPA and partly degraded its by-products (residual TOC TOC = 92 %) was attained. Toxicity was also detected to 50 % of cellular mortality even at long reaction times. However, 40.25 mg L -1 of H 2 O 2 decreased residual TOC to 70 % while cell mortality decreased down to 25 %. With more H 2 O 2 , the residual TOC decreased down to 15 % but cell mortality remained within the 20-25 % level. Photo-Fenton increased the biodegradability and reduced the toxicity of the studied sample.

Elemental analysis of traditional medicinal seeds by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Khaled, S.; Mouzai, M.; Ararem, A.; Hamidatou, L.; Zouranen, B.

2009-01-01

Traditional medicinal seeds prescribed for specific treatment purposes, were purchased from local markets and analyzed by INAA. The samples were irradiated at Es-Salam research reactor, at a power of 5 MWfor 6 h. The accuracy of the method was established by analyzing reference materials. Twenty elements were measured, with good accuracy and reproducibility. The concentration of elements determined, was found to vary depending on the seeds. The daily intake of essential and toxic elements was determined, and compared with the recommended values. The probable cumulative intake of toxic elements is well below the tolerance limits. (author)

The Assessment of Pesticides Residues in Some Organic Cultivated and Wild-Collected Medicinal Plants in Albania

OpenAIRE

FERDI BRAHUSHI; ENDRIT KULLAJ

2014-01-01

Pesticide residues in environment are found in soil, water and plants due to the extensive use of pesticides for agricultural purposes. The residues of pesticides in medicinal plants are of high concern as they are toxic for human life since these plants are used for medicinal purposes. The objective of current study was to estimate the presence of pesticide residues in some organic cultivated and wild-collected medicinal plants in Albania during the years 2010–2013. The determination of pest...

Air toxics emissions from an IGCC process

Energy Technology Data Exchange (ETDEWEB)

Mojtahedi, W.; Norrbacka, P. [Enviropower Inc., Espoo (Finland); Hinderson, A. [Vattenfall (Sweden); Rosenberg, R.; Zilliacus, R.; Kurkela, E.; Nieminen, M. [VTT Energy, Espoo (Finland); Hoffren, H. [IVO International Oy, Vantaa (Finland)

1996-12-01

The so-called simplified coal gasification combined cycle process, incorporating air gasification and hot gas cleanup, promises high power generation efficiency in an environmentally acceptable manner. Increasingly more stringent environmental regulations have focused attention on the emissions of not only SO{sub 2} and NO{sub x} but also on the so-called air toxics which include a number of toxic trace elements. As result of recent amendments to the United States Clean Air Act, IGCC emissions of eleven trace elements: antimony, arsenic, beryllium, cadmium, chromium, cobalt, lead, manganese, mercury, nickel, selenium - as well as the radionuclides uranium and thorium may be regulated. Similarly, air missions standards in Europe include a limit of 0.05 mg Nm{sup 3} for mercury and cadmium and 1.0 3/Nm{sup 3} for other class I trace elements. A suitable sampling/measuring system has been developed in this project (in cooperation with Imatran Voima Oy, Electric Power Research Institute (EPRI) and Radian Cooperation) which will be used in the pressurized gasification tests. This will enable an accurate measurement of the volatilized trace element species, at high temperature and pressure, which may be found in the vapour phase. Models are being developed that can be used to determine not only the chemical equilibrium composition of gaseous, liquid and solid phases, but also possible interactions of the gaseous species with aerosol particles and surfaces, These should be used to more accurately assess the impact of the toxic trace metals emitted from the simplified IGCC system

The influence of electrodialytic remediation on dioxin (PCDD/PCDF) levels in fly ash and air pollution control residues

DEFF Research Database (Denmark)

Dias-Ferreira, Celia; Kirkelund, Gunvor Marie; Jensen, Pernille Erland

2016-01-01

dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF), and how these levels impact on the valorization options for fly ash and APC residue.PCDD/PCDF levels in the original residues ranged between 4.85 and 197 ng g-1, being higher for the electrostatic precipitator fly ash. The toxic equivalent...

Electrical machine analysis using finite elements

CERN Document Server

Bianchi, Nicola

2005-01-01

OUTLINE OF ELECTROMAGNETIC FIELDSVector AnalysisElectromagnetic FieldsFundamental Equations SummaryReferencesBASIC PRINCIPLES OF FINITE ELEMENT METHODSIntroductionField Problems with Boundary ConditionsClassical Method for the Field Problem SolutionThe Classical Residual Method (Galerkin's Method)The Classical Variational Method (Rayleigh-Ritz's Method)The Finite Element MethodReferencesAPPLICATIONS OF THE FINITE ELEMENT METHOD TO TWO-DIMENSIONAL FIELDSIntroductionLinear Interpolation of the Function fApplication of the Variational MethodSimple Descriptions of Electromagnetic FieldsAppendix: I

Effect of composition variations on the long-term wasteform behavior of vitrified domestic waste incineration fly-ash purification residues

International Nuclear Information System (INIS)

Frugier, Pierre

1999-01-01

The effect of variations in the composition of fly-ash purification residue from incinerated domestic waste on the quality of the containment achieved by vitrification was investigated. Three main factors determine the long-term containment quality: the production of a vitrified wasteform, the occurrence of possible crystallization, and the key parameters of long-term alteration in aqueous media. Each of these aspects is described within a composition range defined by variations in the three major elements. (silicon, calcium and aluminum) and two groups of constituents (alkali metals and toxic elements). The silicon fraction in the fly-ash residue was found to be decisive: it is impossible to obtain a satisfactory vitrified wasteform below a given silicon concentration. Compounds with the lowest silica content also exhibited the greatest tendency to crystallize under the cooling conditions prevailing in industrial processes (the dominant crystallized phase is a melilite that occupies a significant fraction of the material and considerably modifies the alteration mechanisms). The initial alteration rate in pure water and the altered glass thickness measured in a closed system at an advanced stage of the dissolution reaction are both inversely related to the silicon concentration in the glass. Several types of long-term behavior were identified according to the composition range, the process conditions and the vitrified waste disposal scenario. Four distinct 'classes' of vitrified wasteform were defined for direct application in industrial processes. (author) [fr

Trace elements in agroecosystems and impacts on the environment.

Science.gov (United States)