Electrical appliance energy consumption control methods and electrical energy consumption systems

Science.gov (United States)

Donnelly, Matthew K [Kennewick, WA; Chassin, David P [Pasco, WA; Dagle, Jeffery E [Richland, WA; Kintner-Meyer, Michael [Richland, WA; Winiarski, David W [Kennewick, WA; Pratt, Robert G [Kennewick, WA; Boberly-Bartis, Anne Marie [Alexandria, VA

2008-09-02

Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

Intelligent analysis of energy consumption in school buildings

International Nuclear Information System (INIS)

Raatikainen, Mika; Skön, Jukka-Pekka; Leiviskä, Kauko; Kolehmainen, Mikko

2016-01-01

Highlights: • Electricity and heating energy consumptions of six school buildings were compared. • Complex multivariate data was analysed using modern computational methods. • Variation in electricity consumption cost is considerably low between study schools. • District heating variation is very slight in two new study schools. • District heating cost describes energy efficiency and state of building automation. - Abstract: Even though industry consumes nearly half of total energy production, the relative share of total energy consumption related to heating and operating buildings is growing constantly. The motivation for this study was to reveal the differences in electricity use and district heating consumption in school buildings of various ages during the working day and also during the night when human-based consumption is low. The overall aim of this study is to compare the energy (electricity and heating) consumption of six school buildings in Kuopio, Eastern Finland. The selected school buildings were built in different decades, and their ventilation and building automation systems are also inconsistent. The hourly energy consumption data was received from Kuopion Energia, the local energy supply company. In this paper, the results of data analysis on the energy consumption in these school buildings are presented. Preliminary results show that, generally speaking, new school buildings are more energy-efficient than older ones. However, concerning energy efficiency, two very new schools were exceptional because ventilation was on day and night in order to dry the building materials in the constructions. The novelty of this study is that it makes use of hourly smart metering consumption data on electricity and district heating, using modern computational methods to analyse complex multivariate data in order to increase knowledge of the buildings’ consumption profiles and energy efficiency.

Uncertainty analysis of energy consumption in dwellings

Energy Technology Data Exchange (ETDEWEB)

Pettersen, Trine Dyrstad

1997-12-31

This thesis presents a comprehensive study of an energy estimation model that can be used to examine the uncertainty of predicted energy consumption in a dwelling. The variation and uncertainty of input parameters due to the outdoor climate, the building construction and the inhabitants are studied as a basis for further energy evaluations. The occurring variations of energy consumption in nominal similar dwellings are also investigated due to verification of the simulated energy consumption. The main topics are (1) a study of expected variations and uncertainties in both input parameters used in energy consumption calculations and the energy consumption in the dwelling, (2) the development and evaluation of a simplified energy calculation model that considers uncertainties due to the input parameters, (3) an evaluation of the influence of the uncertain parameters on the total variation so that the most important parameters can be identified, and (4) the recommendation of a simplified procedure for treating uncertainties or possible deviations from average conditions. 90 refs., 182 figs., 73 tabs.

Energy consumption by gender in some European countries

International Nuclear Information System (INIS)

Raety, R.; Carlsson-Kanyama, A.

2010-01-01

Household total energy use has been estimated in numerous studies in recent decades and differences have mainly been explained by levels of income/expenditure. Studies of gender consumption patterns show that men eat more meat than women and drive longer distances, potentially leading to higher total energy use by men. In this study we calculated the total energy use for male and female consumption patterns in four European countries (Germany, Norway, Greece and Sweden) by studying single households. Significant differences in total energy use were found in two countries, Greece and Sweden. The largest differences found between men and women were for travel and eating out, alcohol and tobacco, where men used much more energy than women. We suggest that these findings are policy relevant for the EU, which aims to mainstream gender issues into all activities and to lower its total energy use.

Trends in energy use in commercial buildings -- Sixteen years of EIA's commercial buildings energy consumption survey

Energy Technology Data Exchange (ETDEWEB)

Davis, J.; Swenson, A.

1998-07-01

The Commercial Buildings Energy Consumption Survey (CBECS) collects basic statistical information on energy consumption and energy-related characteristics of commercial buildings in the US. The first CBECS was conducted in 1979 and the most recent was completed in 1995. Over that period, the number of commercial bindings and total amount of floorspace increased, total consumption remained flat, and total energy intensity declined. By 1995, there were 4.6 million commercial buildings and 58.8 billion square feet of floorspace. The buildings consumed a total of 5.3 quadrillion Btu (site energy), with a total intensity of 90.5 thousand Btu per square foot per year. Electricity consumption exceeded natural gas consumption (2.6 quadrillion and 1.9 quadrillion Btu, respectively). In 1995, the two major users of energy were space heating (1.7 quadrillion Btu) and lighting (1.2 quadrillion Btu). Over the period 1979 to 1995, natural gas intensity declined from 71.4 thousand to 51.0 thousand Btu per square foot per year. Electricity intensity did not show a similar decline (44.2 thousand Btu per square foot in 1979 and 45.7 thousand Btu per square foot in 1995). Two types of commercial buildings, office buildings and mercantile and service buildings, were the largest consumers of energy in 1995 (2.0 quadrillion Btu, 38% of total consumption). Three building types, health care, food service, and food sales, had significantly higher energy intensities. Buildings constructed since 1970 accounted for half of total consumption and a majority (59%) of total electricity consumption.

Energy consumption and energy prices

International Nuclear Information System (INIS)

Bentzen, J.

1993-01-01

Data are presented on energy consumption and energy prices related to a number of OECD (Organisation for Economic Co-operation and Development) lands covering the period 1951-1990. The information sources are described and the development of energy consumption and prices in Denmark are illustrated in relation to these other countries. The energy intensity (the relation between energy consumption and the gross national product) is dealt with. Here it is possible to follow development during the whole post-war period. It is generally understood that Denmark saved large amounts of energy after 1973-74 but, taken over the whole post-war period, savings and decline in energy-gross national product relations are less dramatic compared to conditions in other OECD countries. Energy coefficients or elasticities show the relative rise in consumption compared to the relative rise in gross national product (growth rate). This is shown to be typically unstable and an eventual connection with the amount of energy price increase and/or the growth rate of the national economy is considered. Results of Granger causuality tests on energy consumption, national income and energy prices are presented. Effective energy prices were very low in Denmark up to 1970 when they suddenly began to increase. Since the oil crisis Denmark's energy consumption has fallen whereas the other countries have used rather more energy than before. Effective promotion of energy savings must be seen in relation to the fact that the 1970 basis level of energy consumption and intensity was unusually high. The high effective energy prices have also encouraged energy savings in Denmark. (AB)

Flexible Energy Consumption in Smart House's

DEFF Research Database (Denmark)

Madsen, Per Printz

2012-01-01

the consumer have to use the energy when it is available. The main electrical energy consumer in a modern society is buildings and private homes. The amount of electrical energy used in this sector is about 70% of the total electricity consumption. Because of that buildings and private homes has to play...... an automatic and inteligente house control system that maximize the consumption exibility based on the energy users behavior with out aection the living comfort. This behavior is of course dierent from household to household, because of that it is nessasary include an adaptive behavior prediction system...

Energy consumption characteristics of Guatemalan households

International Nuclear Information System (INIS)

Mansilla, C.; Moscoso, M.R.

1991-01-01

The sectoral consumption pattern in Guatemala has shown that the residential sector is the major energy consumer. It accounts for 68.9 per cent of total consumption, followed by the transportation sector with 16.6 per cent, and the industrial sector with 9.3 per cent. Because of the importance of the household sector in the national energy balance, the Energy Planning Project carried out a nationwide household survey in 1985 to estimate energy-use patterns. This paper focusses on the findings from the analysis of the 2,500 forms completed during that survey. 4 figs, 1 tab

Energy consumption and CO2 emissions in Iran, 2025

International Nuclear Information System (INIS)

Mirzaei, Maryam; Bekri, Mahmoud

2017-01-01

Climate change and global warming as the key human societies' threats are essentially associated with energy consumption and CO 2 emissions. A system dynamic model was developed in this study to model the energy consumption and CO 2 emission trends for Iran over 2000–2025. Energy policy factors are considered in analyzing the impact of different energy consumption factors on environmental quality. The simulation results show that the total energy consumption is predicted to reach 2150 by 2025, while that value in 2010 is 1910, which increased by 4.3% yearly. Accordingly, the total CO 2 emissions in 2025 will reach 985 million tonnes, which shows about 5% increase yearly. Furthermore, we constructed policy scenarios based on energy intensity reduction. The analysis show that CO 2 emissions will decrease by 12.14% in 2025 compared to 2010 in the scenario of 5% energy intensity reduction, and 17.8% in the 10% energy intensity reduction scenario. The results obtained in this study provide substantial awareness regarding Irans future energy and CO 2 emission outlines. - Highlights: • Creation of an energy consumption model using system dynamics. • The effect of different policies on energy consumption and emission reductions. • An ascending trend for the environmental costs caused by CO 2 emissions is observed. • An urgent need for energy saving and emission reductions in Iran.

Energy consumption and stocks of energy-converting artefacts

International Nuclear Information System (INIS)

Bladh, Mats

2012-01-01

The development of total energy consumption is important in a world with limited resources. It is the result of two basic tendencies working in opposite directions: growth in number and in use (such as more cars and driving more) and improvements in energy efficiency (such as more fuel-efficient engines). Since the 1970s growth of energy consumption has slowed down in Sweden. This means that increasing supply has been counteracted by measures improving overall energy efficiency to a larger degree than before. How can long-term development in energy consumption be analysed? This paper proposes a focus on stocks of energy-converting artefacts as a tool for such analyses. In order to show the fruitfulness of this approach, historical data on cars, dwellings and lamps in Sweden are used. Results from the cases in this paper show considerable gains of efficiency in fuel consumption in private cars and heating efficiency in multi-dwelling houses. Demographic factors are important for the outcome. The approach seems to promise a way to analyse energy efficiency that captures both promoting and counteracting factors at both the micro and macro level. - Highlights: ► Growth of energy consumption slowed down in the 1970s, a break in the long-run trend. ► Balance between growth and efficiency factors changes over time and areas of use. ► Savings in heating were not taken back, while those for cars were. ► Focus on stocks of artefacts is a promising tool for analyses. ► Incremental changes within existing stocks can be as big as radical changes.

Building and household X-factors and energy consumption at the residential sector

International Nuclear Information System (INIS)

Estiri, Hossein

2014-01-01

Energy use in residential buildings is one of the major sources of greenhouse gas emission production from cities. Using microdata from the 2009 Residential Energy Consumption Survey (RECS), this study applies structural equation modeling to analyze the direct, indirect, and total impacts of household and building characteristics on residential energy consumption. Results demonstrate that the direct impact of household characteristics on residential energy consumption is significantly smaller than the corresponding impact from the buildings. However, accounting for the indirect impact of household characteristics on energy consumption, through choice of the housing unit characteristics, the total impact of households on energy consumption is just slightly smaller than that of buildings. Outcomes of this paper call for smart policies to incorporate housing choice processes in managing residential energy consumption. - Highlights: • Households indirectly influence residential energy use through housing choice. • Households' total impact on energy use is comparable to that of buildings. • Understanding households' indirect impact will enhance residential energy policy. • Smart energy policies are needed to target both direct and indirect effects

Energy consumption and conservation in food retailing

International Nuclear Information System (INIS)

Tassou, S.A.; Ge, Y.; Hadawey, A.; Marriott, D.

2011-01-01

The total annual CO 2 emissions associated with the energy consumption of the major retail food outlets in the UK amount to around 4.0 MtCO 2 . The energy consumption and emissions from supermarkets varies widely and can depend on many factors such as the type and size of the store, business and merchandising practices and refrigeration and environmental control systems used. This paper provides energy consumption data of a sample of 2570 retail food stores from a number of major retail food chains in the UK. The sample covers all major store categories from convenience stores to hypermarkets and includes approximately 30% of the total number of stores in the UK having a net sales area more than 280 m 2 . The data show a wide variability of energy intensity even within stores of the same retail chain. A power law can be used to describe the variation of the average electrical energy intensity of the stores in the sample with sales area. If the electrical intensity of the stores above the average is reduced to the average by energy conservation measures, annual energy savings of the order of 10% or 840 GWh can be achieved representing 355,000 tonnes annual reduction in CO 2 emissions. The paper also discusses the major energy consuming processes in retail food stores and identifies opportunities for energy savings. - Research highlights: → Energy consumption by supermarkets in the UK is significant and a wide variability exists between stores of similar size. → Energy conservation measures to reduce energy consumption of individual stores to the average can produce a0% energy savings. → Significant opportunities for energy savings exist from the integration of HVAC and refrigeration equipment.

Potential reduction of energy consumption in public university library

Science.gov (United States)

Noranai, Z.; Azman, ADF

2017-09-01

Efficient electrical energy usage has been recognized as one of the important factor to reduce cost of electrical energy consumption. Various parties have been emphasized about the importance of using electrical energy efficiently. Inefficient usage of electrical energy usage lead to biggest factor increasing of administration cost in Universiti Tun Hussein Onn Malaysia. With this in view, a project the investigate potential reduction electrical energy consumption in Universiti Tun Hussein Onn Malaysia was carried out. In this project, a case study involving electrical energy consumption of Perpustakaan Tunku Tun Aminah was conducted. The scopes of this project are to identify energy consumption in selected building and to find the factors that contributing to wastage of electrical energy. The MS1525:2001, Malaysian Standard - Code of practice on energy efficiency and use of renewable energy for non-residential buildings was used as reference. From the result, 4 saving measure had been proposed which is change type of the lamp, install sensor, decrease the number of lamp and improve shading coefficient on glass. This saving measure is suggested to improve the efficiency of electrical energy consumption. Improve of human behaviour toward saving energy measure can reduce 10% from the total of saving cost while on building technical measure can reduce 90% from total saving cost.

Energy consumption and CO2 emissions in Iran, 2025.

Science.gov (United States)

Mirzaei, Maryam; Bekri, Mahmoud

2017-04-01

Climate change and global warming as the key human societies' threats are essentially associated with energy consumption and CO 2 emissions. A system dynamic model was developed in this study to model the energy consumption and CO 2 emission trends for Iran over 2000-2025. Energy policy factors are considered in analyzing the impact of different energy consumption factors on environmental quality. The simulation results show that the total energy consumption is predicted to reach 2150 by 2025, while that value in 2010 is 1910, which increased by 4.3% yearly. Accordingly, the total CO 2 emissions in 2025 will reach 985million tonnes, which shows about 5% increase yearly. Furthermore, we constructed policy scenarios based on energy intensity reduction. The analysis show that CO 2 emissions will decrease by 12.14% in 2025 compared to 2010 in the scenario of 5% energy intensity reduction, and 17.8% in the 10% energy intensity reduction scenario. The results obtained in this study provide substantial awareness regarding Irans future energy and CO 2 emission outlines. Copyright © 2017 Elsevier Inc. All rights reserved.

Energy consumption renewable energy development and environmental impact in Algeria - Trend for 2030

Science.gov (United States)

Sahnoune, F.; Imessad, K.; Bouakaz, D. M.

2017-02-01

The study provides a detailed analysis of the energy production and consumption in Algeria and the associated CO2 emissions. Algeria is an important energy producer (oil and natural gas). The production is currently around 155 MToe. The total primary energy consumption amounted to about 58 MToe equivalent to 1.46 Toe/capita. The energy demand is still increasing, an average annual growth rate of more than 6% per year during the last decade. The growth rate for electricity production was almost twice that of the total energy consumption. In 2015, the installed capacity of the electricity generation plants reached 17.6 GW. Electricity consumption was 64.6 TWh and is expected to reach at least 75 TWh in 2020 and 130 TWh in 2030. The already high electricity demand will double by 2030. In the structure of final energy consumption, the transport sector ranks first (36%), natural gas consumption ranks second (28.5%), followed by electricity production (27.7%). By activity, the energy sector is the main source of CO2 emissions, about ¾ of the total and this sector has the most important potential for mitigation measures. CO2 emissions from this energy sector amounted to 112.2 MT CO2 as follows: 33% transport, 31% electricity production and 26% from natural gas combustion for residential use. The integration of renewable sources in the energy mix represents for Algeria a major challenge. In 2015, Algeria adopted an ambitious program for development of renewable energy. The target is to achieve 22 GW capacity of electricity from renewable by 2030 to reach a rate of 27 % of national electricity generation through renewable sources. By implementing this program, CO2 emissions of power generation will be reduced by more than 18% in 2030.

Some Environmental and Economic Aspects of Energy Saving Measures in Houses. An estimation model for total energy consumption and emissions to air from the Norwegian dwelling stock, and a life cycle assessment method for energy saving measures in houses

Energy Technology Data Exchange (ETDEWEB)

Myhre, L

1995-12-01

Motivated by the need to reduce the total energy consumption and the environmental load from society, this doctoral thesis discusses energy conservation measures on existing houses. Alternative additional thermal insulation measures are assessed using an interdisciplinary life cycle approach. The first task is to develop an interdisciplinary assessment method for building improvement measures, taking account of energy consumption, resource consumption, emissions to air of environmentally harmful gases, and economic costs during the entire life cycle of the building. The second task is to develop an estimation model for the total energy consumption and emissions to air of environmentally harmful gases from the dwelling stock of Norway. Finally, the third task is to assess the total energy saving potential and the total environmental benefits of energy saving measures in houses on a national level, including only life cycle analyses of additional thermal insulation measures on single houses. Chap 2 describes the dwelling stock in Norway. Chaps 3 and 4 present an estimation model for total energy consumption and emissions to air from the dwelling stock, and calculations using the model. Chaps 5 and 6 propose and use a calculation method for the assessment of additional thermal insulation measures, using a ``cradle-to-grave`` approach. Since hydroelectric power is the main energy source in this sector in Norway, estimated payback periods for emissions to air are long. But hydroelectric power saved in this sector may be used to obtain reduction in fossil fuel use in other sectors as discussed in Chap 7. Some of the topics discussed are further elaborated on in appendices. 107 refs., 39 figs, 88 tabs.

Energy drink consumption among young adults in Denmark

DEFF Research Database (Denmark)

Friis, Karina; Lasgaard, Mathias Kamp; Larsen, Finn Breinholt

2015-01-01

-demographic factors and health behaviour with energy drink consumption among young adults (16-24 years) in Denmark. Methods The study is based on a public health survey from 2010 (n = 3923). Multiple logistic regression analyses were used to analyse the association between weekly consumption of energy drink...... and the potential explanatory factors of interest. Results In total, 15.8 % of the young adults drink energy drinks on a weekly basis. Men have higher odds of weekly energy drink consumption than women. The study also shows that young age, being employed and having a low educational level are associated with weekly...

Relation Decomposing between Urbanization and Consumption of Water-Energy Sources

Science.gov (United States)

Wang, Y.; Xiao, W.; Wang, Y.; Zhao, Y.; Wang, J., , Dr; Jiang, D.; Wang, H.

2017-12-01

Abstract: Water resources and energy, important subsystems of city, are the basic guarantee for the normal operation of city, which play an important role to brace the urbanization. The interdependence between them are increasing along with the rapid development of China's economy. The relationship between urbanization and consumption of energy and water have become the focal point of the scholars, but the research have more attention to the impact of urbanization on two subsystems separately, and do not reveal the effects of urbanization on the water-energy nexus. Thus, there is little consideration upon the different characteristics of China's several regions in water and energy consumption in urbanization. In this paper, the STIRPAT model is built to reveal the relationship between urbanization and the consumption of water and energy. Also, the influence of urbanization on different main body of water and energy consumption are discussed. The different regional main factors of water and energy in the process of urbanization are identified through water and energy panel data of China's thirty provinces. Finally, through the regression analysis of total water consumption data of agriculture, industry, service industry with total energy consumption data, the relationship of water and energy in the process of urban development are analyzed.

Energy consumption and CO{sub 2} emissions in Iran, 2025

Energy Technology Data Exchange (ETDEWEB)

Mirzaei, Maryam [Department of Banking and Finance, Multimedia University (Malaysia); Bekri, Mahmoud [Economic and Statistic Institute, Karlsruhe Institute of Technology (Germany)

2017-04-15

Climate change and global warming as the key human societies' threats are essentially associated with energy consumption and CO{sub 2} emissions. A system dynamic model was developed in this study to model the energy consumption and CO{sub 2} emission trends for Iran over 2000–2025. Energy policy factors are considered in analyzing the impact of different energy consumption factors on environmental quality. The simulation results show that the total energy consumption is predicted to reach 2150 by 2025, while that value in 2010 is 1910, which increased by 4.3% yearly. Accordingly, the total CO{sub 2} emissions in 2025 will reach 985 million tonnes, which shows about 5% increase yearly. Furthermore, we constructed policy scenarios based on energy intensity reduction. The analysis show that CO{sub 2} emissions will decrease by 12.14% in 2025 compared to 2010 in the scenario of 5% energy intensity reduction, and 17.8% in the 10% energy intensity reduction scenario. The results obtained in this study provide substantial awareness regarding Irans future energy and CO{sub 2} emission outlines. - Highlights: • Creation of an energy consumption model using system dynamics. • The effect of different policies on energy consumption and emission reductions. • An ascending trend for the environmental costs caused by CO{sub 2} emissions is observed. • An urgent need for energy saving and emission reductions in Iran.

Analysis of energy consumption at the Rzeszów Wastewater Treatment Plant

Directory of Open Access Journals (Sweden)

Masłoń Adam

2017-01-01

Full Text Available Wastewater treatment plants can be classified as energy-intensive facilities, as they account for up to 35 percent of municipal energy consumption. Pumps and aeration systems consume a significant portion of energy within the wastewater plants in particular. The cost of energy consumption for wastewater treatment processes reaches up to 40% of the total operating cost. In case of the WWTPs with the activated sludge systems, about 50% of energy is used for aeration and mixing purposes. At WWTPs, energy consumption is often correlated with the magnitude and type of pollutant load, which can influence the treatment methods and technologies used in the WWTP. In many cases wastewater treatment plants are operated without optimized measures for process optimization. A detailed study of the energy consumption should be executed in order to determine the optimization potential. This paper presents the energy consumption in municipal wastewater treatment plant in Rzeszów (Poland. In the year 2016, parameters of raw and treated wastewater were tested. The data related to energy consumption in plants allowed us to determine the energy intensity coefficients. Total consumption was measured. Indicators of energy consumption per cubic meter and removed load were calculated.

Beverage consumption habits “24/7” among British adults: association with total water intake and energy intake

Science.gov (United States)

2013-01-01

Background Various recommendations exist for total water intake (TWI), yet it is seldom reported in dietary surveys. Few studies have examined how real-life consumption patterns, including beverage type, variety and timing relate to TWI and energy intake (EI). Methods We analysed weighed dietary records from the National Diet and Nutrition Survey of 1724 British adults aged 19–64 years (2000/2001) to investigate beverage consumption patterns over 24 hrs and 7 days and associations with TWI and EI. TWI was calculated from the nutrient composition of each item of food and drink and compared with reference values. Results Mean TWI was 2.53 L (SD 0.86) for men and 2.03 L (SD 0.71) for women, close to the European Food Safety Authority “adequate Intake” (AI) of 2.5 L and 2 L, respectively. However, for 33% of men and 23% of women TWI was below AI and TWI:EI ratio was Beverages accounted for 75% of TWI. Beverage variety was correlated with TWI (r 0.34) and more weakly with EI (r 0.16). Beverage consumption peaked at 0800 hrs (mainly hot beverages/ milk) and 2100 hrs (mainly alcohol). Total beverage consumption was higher at weekends, especially among men. Overall, beverages supplied 16% of EI (men 17%, women 14%), alcoholic drinks contributed 9% (men) and 5% (women), milk 5-6%, caloric soft drinks 2%, and fruit juice 1%. In multi-variable regression (adjusted for sex, age, body weight, smoking, dieting, activity level and mis-reporting), replacing 100 g of caloric beverages (milk, fruit juice, caloric soft drinks and alcohol) with 100 g non-caloric drinks (diet soft drinks, hot beverages and water) was associated with a reduction in EI of 15 kcal, or 34 kcal if food energy were unchanged. Using within-person data (deviations from 7-day mean) each 100 g change in caloric beverages was associated with 29 kcal change in EI or 35 kcal if food energy were constant. By comparison the calculated energy content of caloric drinks consumed was

The energy consumption in the ceramic tile industry in Brazil

International Nuclear Information System (INIS)

Ciacco, Eduardo F.S.; Rocha, Jose R.; Coutinho, Aparecido R.

2017-01-01

The ceramic industry occupies a prominent place in the Brazilian industrial context, representing about 1.0% in the GDP composition. On the other hand, it represent about 1.9% of all energy consumed in the country, and 5.8% of the energy consumed in the Brazilian industrial sector in 2014. Regarding the power consumption by the ceramic industry, most is derived from renewable sources (firewood), followed by use of fossil fuels, mainly natural gas (NG). This study was conducted to quantify the energy consumption in the production of ceramic tiles (CT), by means of experimental data obtained directly in the industry and at every step of the manufacturing process. The step of firing and sintering has the highest energy consumption, with approximately 56% of the total energy consumed. In sequence, have the atomization steps with 30% and the drying with 14%, of total energy consumption in the production of ceramic tiles, arising from the use of NG. In addition, it showed that the production of ceramic tiles by wet process has energy consumption four times the dry production process, due to the atomization step.

Total-factor energy efficiency of regions in China

International Nuclear Information System (INIS)

Hu, J.-L.; Wang, S.-C.

2006-01-01

This paper analyzes energy efficiencies of 29 administrative regions in China for the period 1995-2002 with a newly introduced index. Most existing studies of regional productivity and efficiency neglect energy inputs. We use the data envelopment analysis (DEA) to find the target energy input of each region in China at each particular year. The index of total-factor energy efficiency (TFEE) then divides the target energy input by the actual energy input. In our DEA model, labor, capital stock, energy consumption, and total sown area of farm crops used as a proxy of biomass energy are the four inputs and real GDP is the single output. The conventional energy productivity ratio regarded as a partial-factor energy efficiency index is computed for comparison in contrast to TFEE; our index is found fitting better to the real case. According to the TFEE index rankings, the central area of China has the worst energy efficiency and its total adjustmentof energy consumption amount is over half of China's total. Regional TFEE in China generally improved during the research period except for the western area. A U-shape relation between the area's TFEE and per capita income in the areas of China is found, confirming the scenario that energy efficiency eventually improves with economic growth

Influences Energy Consumption has on Green GDP Growth in China

Science.gov (United States)

Hongxian, Xie

2018-02-01

This paper examines the relationship between China’s total energy consumption growth and GGDP growth based on the data of 1997-2016. With path analysis employed, the direct and indirect influence on GGDP growth rate exerted by several energy consumption ratios as well as the relationship among them is explored. Furtherly, the author determines how much each of these ratios contributes to GGDP. This research suggests that proportion of natural gas consumption and that of other energy consumption are the two major drivers of GGDP growth, while coal and oil consumption proportion inhibits GGDP Growth. Specifically, increasing the proportion of natural gas consumption contributes the most to GGDP growth.

Energy consumption in leisure-time activities; Vapaa-ajan harrastuksiin liittyvae energiankulutus

Energy Technology Data Exchange (ETDEWEB)

Maentylae, K. [VTT Building Technology, Espoo (Finland); Alppivuori, K. [VTT Communities and Infrastructure, Espoo (Finland)

1996-12-31

The purpose of this research is to examine the amount and the structure of direct and indirect energy consumption in connection with leisure occupations at the beginning of the 1990s and to estimate energy saving possibilities connected to these activities. The study deals with 22 activities: going to restaurants, coffee shops, cafeterias, and pubs, going to the theatre, going to the opera, going to ice-hockey matches, going to horse races, going to automobile races, domestic travel, summer cottage use, boating, jogging, cross-country skiing, downhill skiing, ski jumping, ice hockey and other ice sports, swimming in indoor pools, swimming at spas, golf, and car racing. The energy use of individual leisure activities makes up 0,02-1,86 % of Finland`s total annual household energy consumption. Total energy consumption is affected not only by the frequency of an activity but especially by the related need for transportation for an activity. Transportation makes up 20-90 % of the total energy used, and the bulk of this consumption is caused by recreation participants travelling to facilities. The proportion of energy use at the facilities is usually 10-30 %. Recreational equipment require 1-20 %, and activity-related accommodation generally 0-5 % of the total. Activities can be compared to each other on the basis of how much energy is used in one event. By individual choice, consumption related to travel and equipment can be minimized the most. However, individuals have little possibility of influencing the amount of energy used at leisure facilities. (85 refs.)

Energy Consumption Database

Science.gov (United States)

Consumption Database The California Energy Commission has created this on-line database for informal reporting ) classifications. The database also provides easy downloading of energy consumption data into Microsoft Excel (XLSX

Energy consumption and economic growth nexus in Tanzania: An ARDL bounds testing approach

International Nuclear Information System (INIS)

Odhiambo, Nicholas M.

2009-01-01

In this paper, we examine the intertemporal causal relationship between energy consumption and economic growth in Tanzania during the period of 1971-2006. Unlike the majority of the previous studies, we employ the newly developed autoregressive distributed lag (ARDL)-bounds testing approach by Pesaran et al. [2001. Bounds testing approaches to the analysis of level relationships. Journal of Applied Econometrics 16, 289-326] to examine this linkage. We also use two proxies of energy consumption, namely total energy consumption per capita and electricity consumption per capita. The results of the bounds test show that there is a stable long-run relationship between each of the proxies of energy consumption and economic growth. The results of the causality test, on the other hand, show that there is a unidirectional causal flow from total energy consumption to economic growth and a prima-facie causal flow from electricity consumption to economic growth. Overall, the study finds that energy consumption spurs economic growth in Tanzania

Energy consumption and economic growth nexus in Tanzania. An ARDL bounds testing approach

Energy Technology Data Exchange (ETDEWEB)

Odhiambo, Nicholas M. [Economics Department, University of South Africa (UNISA), P.O. Box 392, UNISA, 0003, Pretoria (South Africa)

2009-02-15

In this paper, we examine the intertemporal causal relationship between energy consumption and economic growth in Tanzania during the period of 1971-2006. Unlike the majority of the previous studies, we employ the newly developed autoregressive distributed lag (ARDL)-bounds testing approach by Pesaran et al. [2001. Bounds testing approaches to the analysis of level relationships. Journal of Applied Econometrics 16, 289-326] to examine this linkage. We also use two proxies of energy consumption, namely total energy consumption per capita and electricity consumption per capita. The results of the bounds test show that there is a stable long-run relationship between each of the proxies of energy consumption and economic growth. The results of the causality test, on the other hand, show that there is a unidirectional causal flow from total energy consumption to economic growth and a prima-facie causal flow from electricity consumption to economic growth. Overall, the study finds that energy consumption spurs economic growth in Tanzania. (author)

Energy consumption and economic growth nexus in Tanzania: An ARDL bounds testing approach

Energy Technology Data Exchange (ETDEWEB)

Odhiambo, Nicholas M. [Economics Department, University of South Africa (UNISA), P.O. Box 392, UNISA, 0003, Pretoria (South Africa)], E-mail: nmbaya99@yahoo.com

2009-02-15

In this paper, we examine the intertemporal causal relationship between energy consumption and economic growth in Tanzania during the period of 1971-2006. Unlike the majority of the previous studies, we employ the newly developed autoregressive distributed lag (ARDL)-bounds testing approach by Pesaran et al. [2001. Bounds testing approaches to the analysis of level relationships. Journal of Applied Econometrics 16, 289-326] to examine this linkage. We also use two proxies of energy consumption, namely total energy consumption per capita and electricity consumption per capita. The results of the bounds test show that there is a stable long-run relationship between each of the proxies of energy consumption and economic growth. The results of the causality test, on the other hand, show that there is a unidirectional causal flow from total energy consumption to economic growth and a prima-facie causal flow from electricity consumption to economic growth. Overall, the study finds that energy consumption spurs economic growth in Tanzania.

Can urban rail transit curb automobile energy consumption?

International Nuclear Information System (INIS)

Lin, Boqiang; Du, Zhili

2017-01-01

With the rapid development of China's economy and the speed of urbanization, China's automobile sector has experienced rapid development. The rapid development of the automobile sector has increased energy consumption. According to the results of this paper, automobile energy consumption accounted for about 10.73% of total energy consumption in China in 2015, about 3.6 times the proportion a decade ago. With the deterioration of urban traffic conditions, relying on expanding the amount of vehicles and city road network cannot solve the problem. Urban rail transit is energy-saving and less-polluting, uses less space, has large capacity, and secure. Urban rail transit, according to the principle of sustainable development, is a green transportation system and should be especially adopted for large and medium-sized cities. The paper uses the binary choice model (Probit and Logit) to analyze the main factors influencing the development of rail transit in Chinese cities, and whether automobile energy consumption is the reason for the construction of urban rail transit. Secondly, we analyze the influence of urban rail transit on automobile energy consumption using DID model. The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly, with continuous impact in the second year. - Highlights: • Investigate the main factors influencing the building of rail transit for Chinese cities. • Analyze the influence of urban rail transit on automobile energy consumption by DID model. • The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly.

Energy consumption and economic growth: A causality analysis for Greece

International Nuclear Information System (INIS)

Tsani, Stela Z.

2010-01-01

This paper investigates the causal relationship between aggregated and disaggregated levels of energy consumption and economic growth for Greece for the period 1960-2006 through the application of a later development in the methodology of time series proposed by Toda and Yamamoto (1995). At aggregated levels of energy consumption empirical findings suggest the presence of a uni-directional causal relationship running from total energy consumption to real GDP. At disaggregated levels empirical evidence suggests that there is a bi-directional causal relationship between industrial and residential energy consumption to real GDP but this is not the case for the transport energy consumption with causal relationship being identified in neither direction. The importance of these findings lies on their policy implications and their adoption on structural policies affecting energy consumption in Greece suggesting that in order to address energy import dependence and environmental concerns without hindering economic growth emphasis should be put on the demand side and energy efficiency improvements.

Does FDI influence renewable energy consumption? An analysis of sectoral FDI impact on renewable and non-renewable industrial energy consumption

International Nuclear Information System (INIS)

Doytch, Nadia; Narayan, Seema

2016-01-01

This study examines the link between foreign direct investment (FDI) and energy demand. FDI is a source of financing that allows businesses to grow. At the same time, FDI can be a source of innovation that promotes energy efficiency. Existing evidence on the impact of aggregate FDI inflows on energy consumption is scarce and inconclusive. In the current study, we disaggregate FDI inflows into mining, manufacturing, total services, and financial services components and examine the impact of these FDI flows on renewable – and non-renewable industrial energy – sources for 74 countries for the period 1985–2012. We employ a Blundell–Bond dynamic panel estimator to control for endogeneity and omitted variable biases in our panels. The results point broadly to an energy consumption-reducing effect with respect to non-renewable sources of energy and an energy consumption-augmenting effects with respect to renewable energy. We find that these effects vary in magnitude and significance by sectoral FDI. - Highlights: • FDI generally discourages the use of unclean energy. • Economic growth promotes non-renewable energy consumption. • Service FDI save energy and encourage the switch to renewable energy. • Mining FDI to low and lower middle-income panels save energy. • These results are mainly consistent with the FDI halo effect.

Electrical energy consumption control apparatuses and electrical energy consumption control methods

Science.gov (United States)

Hammerstrom, Donald J.

2012-09-04

Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

A Meta Model for Domestic Energy Consumption

Directory of Open Access Journals (Sweden)

K.,J SREEKANTH

2011-01-01

Full Text Available Prediction of energy consumption particularly in micro level is of vital importance in terms of energy planning and also implementation of any Clean Development Mechanism (CDM activities that has become the order of the world today. It may be difficult to model household energy consumption using conventional methods such as time series forecasting due to many influencing factors. This paper presents a step wise regression model for forecasting domestic energy consumption based on micro level household survey data collected from Kerala, a state in southern part of India. The analysis of the data reveals significant influence of socio-economic, demographic, geographic, and family attributes upon total household energy requirements. While a wide variation in the pattern of energy requirements across the domestic sector belonging to different expenditure classes, per capita income level can be identified as the most important explanatory variable influencing variation in energy requirements. The models developed also demonstrates the influence of per capita land area, residential area among the higher income group while average age and literacy forms significant variables among the lower income group.

A survey of energy drink and alcohol mixed with energy drink consumption.

Science.gov (United States)

Magnezi, Racheli; Bergman, Lisa Carroll; Grinvald-Fogel, Haya; Cohen, Herman Avner

2015-01-01

Energy drink consumption among youth is increasing despite recommendations by the American Academy of Pediatrics to eliminate consumption by youth. This study provides information on consumption of energy drinks and alcohol mixed with energy drinks (AmED) in a sample of Israeli youth and how consumer knowledge about the risks affects consumption rates. The study was conducted in three Tel Aviv public schools, with a total enrollment of 1,253 students in grades 8 through 12. Among them, 802 students completed a 49-item questionnaire about energy drink and AmED consumption, for a 64 % response rate Non-responders included 451 students who were absent or refused to participate. All students in the same school were administered the questionnaire on the same day. Energy drinks are popular among youth (84.2 % have ever drunk). More tenth through twelfth grade students consumed energy drinks than eighth and ninth grade students. Students who began drinking in elementary school (36.8 %) are at elevated risk for current energy drink (P consumption (OR 1.925; 95 %CI 1.18-3.14). The association between current AmED consumption and drinking ED at a young age is important. Boys and those who start drinking early have a greater risk of both ED and AmED consumption. The characteristics of early drinkers can help increase awareness of potential at-risk youth, such as junior and senior high school students with less educated or single parents. Risks posed by early use on later energy drink and AmED consumption are concerning. We suggest that parents should limit accessibility. Increased knowledge about acceptable and actual amounts of caffeine in a single product might decrease consumption.

Rural household energy consumption pattern in the disregarded villages of Bangladesh

International Nuclear Information System (INIS)

Miah, Md. Danesh; Kabir, Rashel Rana Mohammad Sirajul; Koike, Masao; Akther, Shalina; Shin, Man Yong

2010-01-01

Energy is one of the most important ingredients required to alleviate poverty and realize socio-economic and human development, which is directly interconnected to the prominence of life in rural areas. An extensive survey on household energy consumption pattern interrelating socio-economic and demographic factors was carried out in the disregarded villages of Bangladesh using stratified random sampling technique of 120 households. This paper focuses on household energy consumption, various combinations of fuels and their expenditure in the study area. Biomass, kerosene, electricity, LPG and candle were found as the energy carrier used in the rural households in this study. The study shows that 92% households use biomass, 28% LPG, 89% kerosene, 78% electricity and 27% candle as fuel types. It was found that 56% households collected biomass from their own homesteads and/or agricultural lands. Bamboo, branches, cow dung, firewood, rice husk, leaves and twigs and straw were found as the biomass for household energy use. Average monthly household expenditure for total energy was US$ 9.67 (SE, 0.31) per month while the total monthly income of the household was US$ 123 (SE, 2.53). The ratio of the total monthly energy expenditure to the total monthly income was 7.86%. The study will be helpful to understand the energy consumption system and its expenditure in the rural areas of Bangladesh and to the policy formulation for energy production, consumption and utilization.

Rural household energy consumption pattern in the disregarded villages of Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Miah, Md. Danesh [Institute of Forestry and Environmental Sciences, University of Chittagong, Chittagong 4331 (Bangladesh); Forest Policy Laboratory, Shinshu University, 8304 Minamimminowa, Nagano-ken 399-4598 (Japan); Kabir, Rashel Rana Mohammad Sirajul [Institute of Forestry and Environmental Sciences, University of Chittagong, Chittagong 4331 (Bangladesh); Koike, Masao; Akther, Shalina [Forest Policy Laboratory, Shinshu University, 8304 Minamimminowa, Nagano-ken 399-4598 (Japan); Yong Shin, Man [Department of Forest Science, Kookmin University, Seoul (Korea)

2010-02-15

Energy is one of the most important ingredients required to alleviate poverty and realize socio-economic and human development, which is directly interconnected to the prominence of life in rural areas. An extensive survey on household energy consumption pattern interrelating socio-economic and demographic factors was carried out in the disregarded villages of Bangladesh using stratified random sampling technique of 120 households. This paper focuses on household energy consumption, various combinations of fuels and their expenditure in the study area. Biomass, kerosene, electricity, LPG and candle were found as the energy carrier used in the rural households in this study. The study shows that 92% households use biomass, 28% LPG, 89% kerosene, 78% electricity and 27% candle as fuel types. It was found that 56% households collected biomass from their own homesteads and/or agricultural lands. Bamboo, branches, cow dung, firewood, rice husk, leaves and twigs and straw were found as the biomass for household energy use. Average monthly household expenditure for total energy was US$ 9.67 (SE, 0.31) per month while the total monthly income of the household was US$ 123 (SE, 2.53). The ratio of the total monthly energy expenditure to the total monthly income was 7.86%. The study will be helpful to understand the energy consumption system and its expenditure in the rural areas of Bangladesh and to the policy formulation for energy production, consumption and utilization. (author)

The global contribution of energy consumption by product exports from China.

Science.gov (United States)

Tang, Erzi; Peng, Chong

2017-06-01

This paper presents a model to analyze the mechanism of the global contribution of energy usage by product exports. The theoretical analysis is based on the perspective that contribution estimates should be in relatively smaller sectors in which the production characteristics could be considered, such as the productivity distribution for each sector. Then, we constructed a method to measure the global contribution of energy usage. The simple method to estimate the global contribution is the percentage of goods export volume compared to the GDP as a multiple of total energy consumption, but this method underestimates the global contribution because it ignores the structure of energy consumption and product export in China. According to our measurement method and based on the theoretical analysis, we calculated the global contribution of energy consumption only by industrial manufactured product exports in a smaller sector per industry or manufacturing sector. The results indicated that approximately 42% of the total energy usage in the whole economy for China in 2013 was contributed to foreign regions. Along with the primary products and service export in China, the global contribution of energy consumption for China in 2013 by export was larger than 42% of the total energy usage.

Taxation on environmental pollution and energy consumption 1995

International Nuclear Information System (INIS)

Anon.

1996-01-01

The document gives statistics on taxation of pollution caused to the environment and on energy consumption in Denmark. These forms of taxation are rapidly increasing in Denmark as a consequence of the country's environmental policy. In 1995 the total state revenue from these sources was 23.5 billion Danish kroner which comprises 7.1% (compared to 6.5% for 1994) of the total revenue from all forms of taxation. Revenues in 1995 are 8.2 billion Danish kroner higher than in 1986. The State's revenue from taxation of energy consumption was 18.4 billion Danish kroner, which is 78% of revenues from taxation on both environmental pollution and on energy consumption. Revenues from taxation on pollution of the environment was 5.2 billion Danish kroner. The contribution of the taxation of environmental pollution has increased from 2% in 1986 to 22% in 1995 of the total revenue from taxation of both environmental pollution and energy consumption. Statistics include revenues from taxation on petrol, electric power, the use of gas and diesel oil and fuel oils, on kerosone and tar fuels for heating, on autogas and bottled gas, and on pit coal and lignite. Details are given on taxation revenues from the taxation of the different forms of environmental pollution such as carbon dioxide and rubbish etc. and on the taxation on carbon dioxide emission from the use of energy products such as electricity and various fuels. Information is given on grants given to projects for reducing the emission of carbon dioxide from 1993-1996 and on the phasing of taxation on environmental pollution in accordance with the Danish tax reforms. (AB)

Survey of the actual energy consumption in the commercial/residential sector; Minsei bumon energy shohi jittai chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A questionnaire survey was conducted of the actual energy consumption in the business sector (schools, hotels/inns, hospitals, and other service business) in fiscal 1996, and was put together with the survey conducted in the past in order to clarify the structure and trend of energy consumption in the commercial/residential sector. The survey was aimed at making basic data for the development/introduction of the petroleum substituting energy including future new energy. The consumption unit requirement of a school total was 84.9 Mcal/m{sup 2} per year, that of a hotel/inn total was 455.3 Mcal/m{sup 2} per year, and that of a hospital total was 400.2 Mcal/m{sup 2} per year. The energy consumption for business use was summarized. The consumption unit requirement of restaurants was the largest, 622.8 Mcal/m{sup 2} per year, and that of schools was the smallest. In office building business and wholesale/retailing business, electricity is largely used mostly for illumination, power, etc. In restaurants, gas is largely used mostly for its own use including cooking. In schools, energy use for space heating was the largest, but was almost the same as that in office buildings in terms of the amount. 179 figs., 31 tabs.

China building energy consumption: Situation, challenges and corresponding measures

International Nuclear Information System (INIS)

Cai, W.G.; Wu, Y.; Zhong, Y.; Ren, H.

2009-01-01

As one of the biggest parts of total national energy consumption (TNEC), building energy consumption (BEC) catches public eyes and has been regarded as a crucial problem of the current society. For the past 20 years, BEC in china has been increasing at a high speed. To curb the rapid growing of BEC, china has enforced and implemented a series of policies. These include enforcing BEC constraints on new building projects, promoting more environment friendly building designs, establishing a more sophisticated legislation for building energy conservation, and increasing the total budget in the area of BEC control. This article analyzed china BEC situation and the challenges. As the main point, the measures required by China government to improve building energy efficiency were introduced as well.

Fermented dairy products consumption is associated with attenuated cortical bone loss independently of total calcium, protein, and energy intakes in healthy postmenopausal women.

Science.gov (United States)

Biver, E; Durosier-Izart, C; Merminod, F; Chevalley, T; van Rietbergen, B; Ferrari, S L; Rizzoli, R

2018-05-03

A longitudinal analysis of bone microstructure in postmenopausal women of the Geneva Retirees Cohort indicates that age-related cortical bone loss is attenuated at non-bearing bone sites in fermented dairy products consumers, not in milk or ripened cheese consumers, independently of total energy, calcium, or protein intakes. Fermented dairy products (FDP), including yogurts, provide calcium, phosphorus, and proteins together with prebiotics and probiotics, all being potentially beneficial for bone. In this prospective cohort study, we investigated whether FDP, milk, or ripened cheese consumptions influence age-related changes of bone mineral density (BMD) and microstructure. Dietary intakes were assessed at baseline and after 3.0 ± 0.5 years with a food frequency questionnaire in 482 postmenopausal women enrolled in the Geneva Retirees Cohort. Cortical (Ct) and trabecular (Tb) volumetric (v) BMD and microstructure at the distal radius and tibia were assessed by high-resolution peripheral quantitative computerized tomography, in addition to areal (a) BMD and body composition by dual-energy X-ray absorptiometry, at the same time points. At baseline, FDP consumers had lower abdominal fat mass and larger bone size at the radius and tibia. Parathyroid hormone and β-carboxyterminal cross-linked telopeptide of type I collagen levels were inversely correlated with FDP consumption. In the longitudinal analysis, FDP consumption (mean of the two assessments) was associated with attenuated loss of radius total vBMD and of Ct vBMD, area, and thickness. There was no difference in aBMD and at the tibia. These associations were independent of total energy, calcium, or protein intakes. For other dairy products categories, only milk consumption was associated with lower decrease of aBMD and of failure load at the radius. In this prospective cohort of healthy postmenopausal women, age-related Ct bone loss was attenuated at non-bearing bone sites in FDP consumers, not in milk

Energy consumption in the manufacture of sawn goods and wood-based panel products

Energy Technology Data Exchange (ETDEWEB)

Usenius, A.

1983-01-01

A study was made of energy consumption in 1979 and the possibilities of saving energy in the sawmill, plywood, particle board, fibreboard, joinery, wooden houses, glulam, and wood preservation industries. The energy consumption per product unit is minimum in sawmilling, 1.38 GJ/cubic meters and maximum in fibreboard manufacturing, 9.98 GJ/t. In plywood production, the energy consumption (6.95 GJ/cubic meters) is about double that in particleboard production (3.40 GJ/cubic meters). The main part of the energy (70-85%) is heat. In the drying process about 70-85% of total energy is used in individual processes. Over half (53.9%) of the total energy consumption is in the sawmill industry, 19.2% in the plywood industry, 12.2% in the particleboard industry, and 7.2% in the fibreboard industry.

Specific energy consumption in microwave drying of garlic cloves

Energy Technology Data Exchange (ETDEWEB)

Sharma, G.P. [Department of Processing and Food Engineering, College of Technology and Agricultural Engineering, Udaipur 313 001, Rajasthan (India); Prasad, Suresh [Agricultural and Food Engineering Department, Indian Institute of Technology, Kharagpur 721 302 (India)

2006-09-15

The convective and microwave-convective drying of garlic cloves was carried out in a laboratory scale microwave dryer, which was developed for this purpose. The specific energy consumption involved in the two drying processes was estimated from the energy supplied to the various components of the dryer during the drying period. The specific energy consumption was computed by dividing the total energy supplied by amount of water removed during the drying process. The specific energy consumption in convective drying of garlic cloves at 70{sup o}C temperature and 1.0m/s air velocity was estimated as 85.45MJ/kg of water evaporated. The increase in air velocity increased the energy consumption. The specific energy consumption at 40W of microwave power output, 70{sup o}C air temperature and 1.0m/s air velocity was 26.32MJ/kg of water removed, resulting in about a 70% energy saving as compared to convective drying processes. The drying time increased with increase in air velocity in microwave-convective drying process; a trend reverse to what was observed in convective drying process of garlic cloves. (author)

Sectoral analysis of energy consumption and energy related CO2 emissions in Finland 1990-1999

International Nuclear Information System (INIS)

Kirjavainen, M.; Tamminen, E.

2002-03-01

This study describes the development of energy consumption and energy related CO 2 emissions in Finland between 1990-1999. For better understanding of the factors behind the development in main sectors, special indicators are calculated to evaluate how the overall development of the sector is affected by the general activity of the sector, changes in sectoral structure and changes in end-use intensities within the sector. The specific energy consumption of space heating reduced especially during the first half of the decade. Also the total CO 2 emissions caused by space heating reduced, in spite of the increase in the building stock. The main reason for this has been the reduction in specific CO 2 emissions in production of district heat. Regardless of the increased traffic and slightly increased use of passenger cars over public transport, the total energy consumption as well as total CO 2 emissions in passenger transport reduced during the decade. The main reason for this is that the specific fuel consumption of passenger cars has reduced significantly. Volumes in freight traffic increased rapidly after the recession, and as no significant changes have occurred in either specific consumptions or in shares of different transport modes, the total energy use as well as total CO 2 emissions of freight transport have increased. The major factors affecting the energy use and CO 2 emissions of the manufacturing sector have been changes in production volumes. After the recession, growth has been rapid and that has resulted in increased total energy use and CO 2 emissions. Anyway, the especially rapid growth of the less energy intensive electronics industry has resulted in downward overall energy intensity within manufacturing sector. Major factors affecting the specific CO 2 emissions in energy production have been changes in the primary energy supply mix. In electricity production, the major factors have been the increase in nuclear capacity and the variation in net

URBAN FEATURES AND ENERGY CONSUMPTION AT LOCAL LEVEL

Directory of Open Access Journals (Sweden)

Ali Soltani

2012-12-01

Full Text Available There has been a growing interest in discovering the human effects on the environment and energy consumption in recent decades. It is estimated that the share of energy consumed in transportation and housing systems are around 20 and 30 percent of total energy consumption respectively. Furthermore, the residential greenhouse emissions depend on urban form and structure. This paper explores the effects of urban features on residential energy consumption at neighborhood level using data collected through household questionnaire (n=140. Two residential districts in metropolitan Shiraz, south of Iran, were selected as case study areas. Different features of two areas were compared including building density, typology, housing location, parcel size, floor area and construction materials. Ordinary linear regression was used to discover the impact of explanatory variables on energy consumption. It was found that some physical variables such as parcel size, setback and number of floors played significant roles in explaining the variances exist in energy use level. The results can be used by governmental agencies to modify land use policies and subdivision rules in hope of saving energy and achieving a sustainable community.

Apparent Consumption vs. Total Consumption--A Lead-Acid Battery Case Study

Science.gov (United States)

Wilburn, David R.; Buckingham, David A.

2006-01-01

Introduction: This report compares estimates of U.S. apparent consumption of lead with estimates of total U.S. consumption of this mineral commodity from a materials flow perspective. The difference, attributed to the amount of lead contained in imported and exported products, was found to be significant for this sector. The study also assesses the effects of including mineral commodities incorporated in manufactured products on the interpretation of observed trends in minerals consumption and trade. Materials flow is a systems approach to understanding what happens to the materials we use from the time a material is extracted, through its processing and manufacturing, to its ultimate disposition. The U.S. Geological Survey (USGS) provides accurate and detailed mineral production and mineral commodity consumption statistics that are essential for government, nongovernment organizations, and the public to gain a better understanding of how and where materials are used and their effect on the environment and society. Published statistics on mineral apparent consumption are limited to estimates of consumption of raw material forms (ore, concentrate, and [or] refined metal). For this study, apparent consumption is defined as mine production + secondary refined production + imports (concentrates and refined metal) ? exports (concentrates and refined metal) + adjustments for government and industry stock changes. These estimates do not account for the amount of mineral commodities contained in manufactured products that are imported to the United States, nor do they deduct the amount of these mineral commodities contained in manufactured products that are exported from the United States. When imports or exports of manufactured products contribute significantly to the total use of a particular raw material, an estimate of consumption that does not consider the incorporated forms of these mineral commodities within imported or exported manufactured products can be either

Comparison of machine learning methods for estimating energy consumption in buildings

NARCIS (Netherlands)

Mocanu, E.; Nguyen, P.H.; Gibescu, M.; Kling, W.L.

2014-01-01

The increasing number of decentralized renewable energy sources together with the grow in overall electricity consumption introduce many new challenges related to dimensioning of grid assets and supply-demand balancing. Approximately 40% of the total energy consumption is used to cover the needs of

The industrial energy consumption in 1999

International Nuclear Information System (INIS)

Anon.

2001-01-01

The Danish industrial energy consumption in 1999 is presented in tables. The tables include: the development in the energy consumption, the amount of employees in each of the main branches, fuel consumption, the fuel and energy consumption in 1999 based on each group of branches and energy category, the energy consumption in 1997 for each group of branches and the percentage distribution on energy category, and the fuel and energy consumption of motor vehicles in 1999 based on each group of branches. (SM)

Occupant behavior and energy consumption in dwellings: An analysis of behavioral models and actual energy consumption in the dutch housing stock

Directory of Open Access Journals (Sweden)

Merve Bedir

2017-11-01

informatics. The main question that this thesis deals with is: How much does the occupant behavior influence the energy consumption of dwellings in the Netherlands, and how could we identify the determinants of consumption, as well as the behavioral patterns and profiles? In order to research this question, the following questions are formulated: • I What is the sensitivity of a dwelling’s heating energy consumption to occupant behavior? (Chapter 3 • What are the existing models developed for the occupant behavior and energy performance relationship? and how different are the results of these models in terms of calculating the influence of occupant behavior on energy performance? • How can behavior be modelled in order to assess the robustness of the energy performance in dwellings to occupant behavior? • What is the weight of each behavioral aspect in terms of its influence on energy consumption? • II What is the influence of lighting and appliance use on the total electricity consumption in dwellings? (Chapter 4 • What are the main direct and indirect determinants of electricity consumption? (Direct determinant: such as number of appliances and duration of appliance use …; Indirect determinant: such as household size, dwelling size, dwelling type … • How much of the variance in electricity consumption in dwellings can be explained by direct and indirect determinants? • III What are the behavioral patterns and profiles of energy consumption? • What are the behavioral patterns of thermostat control? How do they relate to the household characteristics, revealing behavioral profiles? (Chapter 5 • What are the behavioral patterns of electricity consumption? How do they relate to the household characteristics, revealing behavioral profiles? (Chapter 6 In this thesis, occupant behavior is modeled in different chapters using sensitivity, correlation, regression, repeated measures, and cluster and factor analyses, based on data on dwelling and household

Natural gas reserves/total energy consumption: a useful new ratio for addressing global climate change concerns

International Nuclear Information System (INIS)

Siddiqi, T.A.

2002-01-01

Energy analysts have used the reserves/production ratios for oil and natural gas for decades as indicators of the ability of countries to maintain or increase their production of those fuels. The global community is now faced with the challenge of reducing carbon dioxide emissions from a variety of sources, with the energy sector being the largest contributor to the anthropogenic emissions of greenhouse gases. Natural gas has emerged as a highly desirable fuel, since it produces lower emissions of carbon dioxide than coal or oil for equivalent amounts of energy supplied. The ratio of a country's proven natural gas reserves to its total energy consumption is a good indicator of its ability to improve its air quality situation or address greenhouse gas reduction targets from domestic natural gas sources. This paper provides the ratio for several countries at different stages of development, and discusses some of the implications. In countries where exploration for natural gas has been limited, the estimated resources in place may sometimes be a more useful indicator than proven reserves, and could be used instead. (author)

Understanding the spectrum of domestic energy consumption: Empirical evidence from France

International Nuclear Information System (INIS)

Belaïd, Fateh

2016-01-01

This article focuses on residential energy consumption in France. Using a bottom-up statistical approach, this analysis explores determinants of household energy consumption using data from the most recent National Housing Survey. The primary objective is to tease out the impacts of various factors on the domestic energy consumption spectrum across different population groups. The aim of this approach is to neutralize conventional factors affecting energy consumption (age of house, total area, etc.) to finely analyze the impact of other determinants including those relating to household characteristics and other control variables. First, we define homogeneous consumption groups of households by using multivariate statistical techniques, namely the Multiple Correspondence Analysis and Ascending Hierarchical Classification. Second, we use standard OLS regression to explore the effects of various factors on domestic energy consumption among homogeneous groups of households. This multivariate analysis exercise has led us to identify four main consumption typologies. Results revealed that energy prices were the most important factors determining domestic energy consumption. In addition, this study showed that occupant characteristics significantly affect domestic energy use. Results of this research call for combine all efforts, multiple strategies and smart policies, to incorporate household and consumption behaviors in managing domestic energy consumption. - Highlights: •Survey data of 36,000 occupiers from France is analyzed. •Bottom-up statistical approach is used to analyze domestic energy consumption. •Occupant characteristics significantly affect domestic energy use. •The impact of households attributes varies markedly across consumption groups.

Evidence of long memory behavior in U.S. renewable energy consumption

International Nuclear Information System (INIS)

Pestana Barros, Carlos; Gil-Alana, Luis A.; Payne, James E.

2012-01-01

This study examines the degrees of time persistence in U.S. total renewable energy consumption using innovative fractional integration and autoregressive models with monthly data from 1981:1 to 2010:10. The results indicate that renewable energy consumption is better explained in terms of a long memory model that incorporates persistence components and seasonality. The degree of integration is above 0.5 but significantly below 1.0, suggesting nonstationarity with mean reverting behavior. The presence of long memory behavior (persistence) in renewable energy consumption suggests that random shocks may very well move renewable energy consumption from pre-determined target levels for a period of time.

Effect of energy taxes on energy consumption

International Nuclear Information System (INIS)

Johnsen, T.A.

1991-01-01

The energy consumption and taxation in Norway is described in addition to some of the consequences of this taxation on the energy market. Modelling of energy demand is dealt with. It is concluded that the influence of energy taxation on energy consumption is dependent on market conditions for individual energy products. This thesis is elaborated. (AB)

An overview of energy consumption of the globalized world economy

International Nuclear Information System (INIS)

Chen, Z.M.; Chen, G.Q.

2011-01-01

For the globalized world economy with intensive international trade, an overview of energy consumption is presented by an embodied energy analysis to track both direct and indirect energy uses based on a systems input-output simulation. In 2004, the total amounts of energy embodied in household consumption, government consumption, and investment are 7749, 874, and 2009 Mtoe (million tons of oil equivalent), respectively. The United States is shown as the world's biggest embodied energy importer (683 Mtoe) and embodied energy surplus receiver (290 Mtoe), in contrast to China as the biggest exporter (662 Mtoe) and deficit receiver (274 Mtoe). Energy embodied in consumption per capita varies from 0.05 (Uganda) to 19.54 toe (Rest of North America). Based on a forecast for 2005-2035, China is to replace the United States as the world's leading embodied energy consumer in 2027, when its per capita energy consumption will be one quarter of that of the United States. - Highlights: → We present an overview of global energy profile in terms of embodied energy. → The US and China are top embodied energy consumers as well as traders in 2004. → Equality issue is studied by analyzing per capita embodied energy consumption. → The US remains to be the leading energy consumer until replaced by China in 2027.

An application of a double bootstrap to investigate the effects of technological progress on total-factor energy consumption performance in China

International Nuclear Information System (INIS)

Li, Ke; Lin, Boqiang

2017-01-01

This paper proposes a total-factor energy consumption performance index (TEPI) for measuring China's energy efficiency across 30 provinces during the period 1997 to 2012. The TEPI is derived by solving an improved non-radial data envelopment analysis (DEA) model, which is based on an energy distance function. The production possibility set is constructed by combining the super-efficiency and sequential DEA models to avoid “discriminating power problem” and “technical regress”. In order to explore the impacts of technological progress on TEPI and perform statistical inferences on the results, a two-stage double bootstrap approach is adopted. The important findings are that China's energy technology innovation produces a negative effect on TEPI, while technology import and imitative innovation produce positive effects on TEPI. Thus, the main contribution of TEPI improvement is technology import. These conclusions imply that technology import especially foreign direct investment (FDI) is important for imitative innovation and can improve China's energy efficiency. In the long run, as the technical level of China approaches to the frontier, energy technology innovation and its wide adoption become a sustained way to improve energy efficiency. Therefore, it is urgent for China to introduce measures such as technology translation and spillover policies as well as energy pricing reforms to support energy technology innovation. - Highlights: • A total-factor energy consumption performance index (TEPI) is introduced. • Three types of technological progress have various effects on TEPI. • FDI is the main contributor of TEPI improvement. • An improved DEA calculation method is introduced. • A two-stage double-bootstrap non-radial DEA model is used.

Household energy consumption and expenditures, 1990

International Nuclear Information System (INIS)

1993-01-01

This report, Household Energy Consumption and Expenditures 1990, is based upon data from the 1990 Residential Energy Consumption Survey (RECS). Focusing on energy end-use consumption and expenditures of households, the 1990 RECS is the eighth in a series conducted since 1978 by the Energy Information Administration (EIA). Over 5,000 households were surveyed, providing information on their housing units, housing characteristics, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information provided represents the characteristics and energy consumption of 94 million households nationwide

Current situation of energy consumption and measures taken for energy saving in the iron and steel industry in China

International Nuclear Information System (INIS)

Guo, Z.C.; Fu, Z.X.

2010-01-01

A survey of the key issues associated with the development in the Chinese iron and steel industry and current situations of energy consumption are described in this paper. The apparent production of crude steel in China expanded to 418.78 million tonnes in 2006, which was about 34% share of the world steel production. The iron and steel industry in China is still one of the major high energy consumption and high pollution industries, which accounts for the consumption of about 15.2% of the national total energy, and generation of 14% of the national total wastewater and waste gas and 6% of the total solid waste materials. The average energy consumption per unit of steel is about 20% higher than that of other advanced countries due to its low energy utilization efficiency. However, the energy efficiency of the iron and steel industry in China has made significant improvement in the past few years and significant energy savings will be achieved in the future by optimizing end-use energy utilization. Finally, some measures for the industry in terms of the economic policy of China's 11th five-year plan are also presented.

The industrial energy consumption in 2003

International Nuclear Information System (INIS)

Anon.

2004-01-01

The statistics present the industry's energy consumption and composition, and the development from 1973 to 2003. In this period the composition of the energy consumption has changed considerably: a decrease in the consumption of liquid fuels and an increase in the consumption of natural gas and electric power. The energy consumption in the Danish industry decreased with almost 9 % from 2001 to 2003. This relatively large decrease was mainly due to the closing down of a steel factory. In the wood industry the energy consumption decreased with 36 % from 2001 to 2003, while the energy consumption in the electronics industry increased. (ln)

Beverage consumption habits “24/7” among British adults: association with total water intake and energy intake

Directory of Open Access Journals (Sweden)

Gibson Sigrid

2013-01-01

Full Text Available Abstract Background Various recommendations exist for total water intake (TWI, yet it is seldom reported in dietary surveys. Few studies have examined how real-life consumption patterns, including beverage type, variety and timing relate to TWI and energy intake (EI. Methods We analysed weighed dietary records from the National Diet and Nutrition Survey of 1724 British adults aged 19–64 years (2000/2001 to investigate beverage consumption patterns over 24 hrs and 7 days and associations with TWI and EI. TWI was calculated from the nutrient composition of each item of food and drink and compared with reference values. Results Mean TWI was 2.53 L (SD 0.86 for men and 2.03 L (SD 0.71 for women, close to the European Food Safety Authority “adequate Intake” (AI of 2.5 L and 2 L, respectively. However, for 33% of men and 23% of women TWI was below AI and TWI:EI ratio was In multi-variable regression (adjusted for sex, age, body weight, smoking, dieting, activity level and mis-reporting, replacing 100 g of caloric beverages (milk, fruit juice, caloric soft drinks and alcohol with 100 g non-caloric drinks (diet soft drinks, hot beverages and water was associated with a reduction in EI of 15 kcal, or 34 kcal if food energy were unchanged. Using within-person data (deviations from 7-day mean each 100 g change in caloric beverages was associated with 29 kcal change in EI or 35 kcal if food energy were constant. By comparison the calculated energy content of caloric drinks consumed was 47 kcal/100 g. Conclusions TWI and beverage consumption are closely related, and some individuals appeared to have low TWI. Compensation for energy from beverages may occur but is partial. A better understanding of interactions between drinking and eating habits and their impact on water and energy balance would give a firmer basis to dietary recommendations.

Household energy consumption and expenditures 1993

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-05

This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expenditures than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.

Analysis and Optimization of Building Energy Consumption

Science.gov (United States)

Chuah, Jun Wei

Energy is one of the most important resources required by modern human society. In 2010, energy expenditures represented 10% of global gross domestic product (GDP). By 2035, global energy consumption is expected to increase by more than 50% from current levels. The increased pace of global energy consumption leads to significant environmental and socioeconomic issues: (i) carbon emissions, from the burning of fossil fuels for energy, contribute to global warming, and (ii) increased energy expenditures lead to reduced standard of living. Efficient use of energy, through energy conservation measures, is an important step toward mitigating these effects. Residential and commercial buildings represent a prime target for energy conservation, comprising 21% of global energy consumption and 40% of the total energy consumption in the United States. This thesis describes techniques for the analysis and optimization of building energy consumption. The thesis focuses on building retrofits and building energy simulation as key areas in building energy optimization and analysis. The thesis first discusses and evaluates building-level renewable energy generation as a solution toward building energy optimization. The thesis next describes a novel heating system, called localized heating. Under localized heating, building occupants are heated individually by directed radiant heaters, resulting in a considerably reduced heated space and significant heating energy savings. To support localized heating, a minimally-intrusive indoor occupant positioning system is described. The thesis then discusses occupant-level sensing (OLS) as the next frontier in building energy optimization. OLS captures the exact environmental conditions faced by each building occupant, using sensors that are carried by all building occupants. The information provided by OLS enables fine-grained optimization for unprecedented levels of energy efficiency and occupant comfort. The thesis also describes a retrofit

Energy consumption analysis of Spanish food and drink, textile, chemical and non-metallic mineral products sectors

International Nuclear Information System (INIS)

Aranda-Usón, Alfonso; Ferreira, Germán; Mainar-Toledo, M.D.; Scarpellini, Sabina; Llera Sastresa, Eva

2012-01-01

This paper provides quantitative information for energy consumption from four different industry sectors based on an energy analysis obtained by means of in-situ energy audits and complementary information. The latter information was taken from Saving Strategy and Energy Efficiency in Spain (Estrategia de Ahorro y Eficiencia Energética en España 2004–2010, E4) documents and the 2009 Industrial Survey of Spain from the National Statistics Institute (Instituto Nacional de Estadística, INE). The results show an estimate of energy consumption for each sector, namely Spanish food, drink and tobacco (9.6%), textile (4.5%), chemical (14.7%), and non-metallic mineral products (24.3%), as well as the degree of inefficiency for each, obtained by means of a stochastic frontier production function model. These results are combined with the energy consumption analysis to identify potential energy saving opportunities around 20.0% of the total energy consumption for all studied sectors. These energy saving opportunities are classified according to thermal or electrical energy consumption and percentage savings of the total energy consumption. -- Highlights: ► This study presents the analysis of four Spanish energy-consuming industrial sectors. ► The four selected sectors account for 33.0% of the total industrial SMEs. ► An audit was carried out in several factories from each analysed industrial sector. ► Stochastic Cobb-Douglas frontiers were used to estimate production frontiers. ► Potential energy saving opportunities around 20.0% of the total energy consumption.

Analysis of energy consumption in lowland rice-based cropping system of Malaysia

Directory of Open Access Journals (Sweden)

Chan Chee Wan

2005-07-01

Full Text Available Sufficient energy is needed in the right form and at the right time for adequate crop production. One way to optimize energy consumption in agriculture is to determine the efficiency of methods and techniques used. With the current increase in world population, energy consumption needs effective planning. That is, the input elements need to be identified in order to prescribe the most efficient methods for controlling them. This study was undertaken in order to determine the direct and indirect energy consumption of field operations in a lowland rice production system of Malaysia. Field time, fuel and other energy requirements were measured for the tillage, planting, fertilizing, spraying and harvesting operations performed. Energy analysis carried out revealed the highest average operational energy consumption was for tillage (1747.33 MJ ha-1 which accounted for about 48.6% of the total operational energy consumption (3595.87 MJ ha-1, followed by harvesting (1171.44 MJ ha-1, 32.6% and planting (562.91 MJ ha-1, 15.7%. Fertilizing and pesticide spraying did not make any significant contributions to the operational energy consumption. Based on energy sources, fuel was the main consumer of direct energy with 2717.82 MJha-1 (22.2%, and fertilizer recording the highest indirect energy consumption of 7721.03 MJha-1 (63.2%. Human labour, pesticides, seeds and indirect energy for machinery use had marginal importance, contributing only 0.2%, 0.6%, 6.8% and 6.9%, respectively to the total energy consumption (12225.97 MJha-1. Average grain yield was 6470.8 kg ha-1, representing energy output of 108321.75 MJha-1, that is, 96095.78 MJ net energy gain or 8.86 MJ output per MJ input. Energy input per kilogram grain yield was 1.89 MJkg-1. The results of the study indicate energy gain in the lowland rice production system of Malaysia.

Energy consumption and Growth of renewable energies in China

International Nuclear Information System (INIS)

Meunie, A.

2007-01-01

The Chinese government's ability to shift the energy structure towards renewable energies is now a world stake. The high weight of coal takes the economy into unsustainable growth, both at local level (SO 2 emissions) and at a global level (CO 2 emissions). But the extensive goods accumulation strategy at a pace in the region of 10% per year, prevents renewable energy sources from gaining a growing share of total consumption. On the contrary, the exponential increase in needs makes an ever-growing use of coal quite inescapable. This articles discusses the driving forces behind the energy sector and explores the high potential or renewable resources in China. (author)

Does trade liberalization effect energy consumption?

International Nuclear Information System (INIS)

Ghani, Gairuzazmi M.

2012-01-01

The effect of trade liberalization on the environment can be directly linked to energy consumption, because energy consumption and production are the underlying cause of most pollutants that harm the environment. The descriptive statistics show that average annual growth of energy consumption per capita after trade liberalization varies among countries; hence it is a possibility that the effect of trade liberalization is conditional on factors other than liberalization per se. The regression results show that trade liberalization per se does not affect the growth of energy consumption of the developing countries analyzed, but its interaction with capital per labor reduces the growth of energy consumption as capital per labor increases. However, the effect is only significant after a certain minimum threshold level capital per labor is reached. On the other hand, economic growth increases energy consumption and its effect is not conditioned on trade liberalization. These two different effects mean that, with regards to energy consumption, countries at a higher level of economic development are more likely to reap the benefit of liberalization relative to less developed countries. - Research highlights: ► This paper examines the effect of trade liberalization on energy consumption. ► Developed countries are more likely to reap the benefit of trade liberalization. ► Growth of energy consumption after trade liberalization varies among countries. ► Interaction of capital per labor with liberalization reduces energy consumption.

Projected energy and water consumption of Pacific Northwest irrigation systems

Energy Technology Data Exchange (ETDEWEB)

King, L. D.; Hellickson, M. L.; Schmisseur, W. E.; Shearer, M. N.

1978-10-01

A computer model has been developed to predict present and future regional water, energy, labor, and capital requirements of irrigated agricultural production in Idaho, Oregon, and Washington. The energy requirements calculated were on-farm pumping, and total energies. Total energies are the combined energies of on-farm pumping, manufacture, and installation. Irrigation system selections and modifications were based on an economic analysis utilizing the following input parameters: water, energy, labor, and capital costs and requirements; groundwater and surface water pumping lifts; improved application efficiencies; and pumping plant efficiencies. Major conclusions and implications of this analysis indicate that: as water application efficiencies increases additional quantities of water will not become available to other users; an overall increase in water application efficiencies resulted in decreases in gross water applications and increases in overall on-farm pumping and total energy consumptions; more energy will be consumed as pumping and total energies than will be conserved through decreased diversion pumping energy requirements; pump-back and similar technologies have the potential of both increasing application efficiencies and energy conservation; and the interrelationships understood between applying water in quantities greater than required for crop consumptive use and leaching, and late season in-steam flow augmentation and/or aquifer recharge are not well understood, and sound policy decisions concerning agricultural use of water and energy cannot be made until these interrelationships are better understood.

The industrial energy consumption in 2001

International Nuclear Information System (INIS)

Anon.

2002-01-01

The Danish industrial energy consumption in 2001 is presented in tables. The tables include: the development in the energy consumption, the amount of employees in each of the main branches, fuel consumption, the fuel and energy consumption in 2001 based on each group of branches and energy category, and the emission of CO 2 . (LN)

Electricity consumption and energy savings potential of video game consoles in the United States

Energy Technology Data Exchange (ETDEWEB)

Hittinger, E.; Mullins, K.A.; Azevedo, I.L. [Department of Engineering and Public Policy, Carnegie Mellon University, Pittsburgh, PA 15213 (United States)

2012-11-15

Total energy consumption of video game consoles has grown rapidly in the past few decades due to rapid increases in market penetration, power consumption of the devices, and increasing usage driven by new capabilities. Unfortunately, studies investigating the energy impacts of these devices have been limited and potential responses, such as ENERGY STAR requirements, have been difficult to define and implement. We estimate that the total electricity consumption of video game consoles in the US was around 11 TWh in 2007 and 16 TWh in 2010 (approximately 1 % of US residential electricity consumption), an increase of almost 50 % in 3 years. However, any estimate of total game console energy consumption is highly uncertain, and we have determined that the key uncertainty is the unknown consumer behavior with regards to powering down the system after use. Even under this uncertainty, we demonstrate that the most effective energy-saving modification is incorporation of a default auto power down feature, which could reduce electricity consumption of game consoles by 75 % (10 TWh reduction of electricity in 2010), saving consumers over USD 1 billion annually in electricity bills. We conclude that using an auto power down feature for game consoles is at least as effective for reducing energy consumption as implementing a strict set of energy efficiency improvements for the devices, is much easier to implement given the nature of the video game console industry, and could be applied retroactively to currently deployed consoles through firmware updates.

Energy consumption and economic growth: Evidence from China at both aggregated and disaggregated levels

International Nuclear Information System (INIS)

Yuan Jiahai; Kang Jiangang; Zhao Changhong; Hu Zhaoguang

2008-01-01

Using a neo-classical aggregate production model where capital, labor and energy are treated as separate inputs, this paper tests for the existence and direction of causality between output growth and energy use in China at both aggregated total energy and disaggregated levels as coal, oil and electricity consumption. Using the Johansen cointegration technique, the empirical findings indicate that there exists long-run cointegration among output, labor, capital and energy use in China at both aggregated and all three disaggregated levels. Then using a VEC specification, the short-run dynamics of the interested variables are tested, indicating that there exists Granger causality running from electricity and oil consumption to GDP, but does not exist Granger causality running from coal and total energy consumption to GDP. On the other hand, short-run Granger causality exists from GDP to total energy, coal and oil consumption, but does not exist from GDP to electricity consumption. We thus propose policy suggestions to solve the energy and sustainable development dilemma in China as: enhancing energy supply security and guaranteeing energy supply, especially in the short run to provide adequate electric power supply and set up national strategic oil reserve; enhancing energy efficiency to save energy; diversifying energy sources, energetically exploiting renewable energy and drawing out corresponding policies and measures; and finally in the long run, transforming development pattern and cut reliance on resource- and energy-dependent industries

Multifactor-influenced energy consumption forecasting using enhanced back-propagation neural network

International Nuclear Information System (INIS)

Zeng, Yu-Rong; Zeng, Yi; Choi, Beomjin; Wang, Lin

2017-01-01

Reliable energy consumption forecasting can provide effective decision-making support for planning development strategies to energy enterprises and for establishing national energy policies. Accordingly, the present study aims to apply a hybrid intelligent approach named ADE–BPNN, the back-propagation neural network (BPNN) model supported by an adaptive differential evolution algorithm, to estimate energy consumption. Most often, energy consumption is influenced by socioeconomic factors. The proposed hybrid model incorporates gross domestic product, population, import, and export data as inputs. An improved differential evolution with adaptive mutation and crossover is utilized to find appropriate global initial connection weights and thresholds to enhance the forecasting performance of the BPNN. A comparative example and two extended examples are utilized to validate the applicability and accuracy of the proposed ADE–BPNN model. Errors of the test data sets indicate that the ADE–BPNN model can effectively predict energy consumption compared with the traditional back-propagation neural network model and other popular existing models. Moreover, mean impact value based analysis is conducted for electrical energy consumption in U.S. and total energy consumption forecasting in China to quantitatively explore the relative importance of each input variable for the improvement of effective energy consumption prediction. - Highlights: • Enhanced back-propagation neural network (ADE-BPNN) for energy consumption forecasting. • ADE-BPNN outperforms the current best models for two comparative cases. • Mean impact value approach explores socio-economic factors' relative importance. • ADE-BPNN's adjusted goodness-of-fit is 99.2% for China's energy consumption forecasting.

Beverage Consumption Habits and Association with Total Water and Energy Intakes in the Spanish Population: Findings of the ANIBES Study.

Science.gov (United States)

Nissensohn, Mariela; Sánchez-Villegas, Almudena; Ortega, Rosa M; Aranceta-Bartrina, Javier; Gil, Ángel; González-Gross, Marcela; Varela-Moreiras, Gregorio; Serra-Majem, Lluis

2016-04-20

Inadequate hydration is a public health issue that imposes a significant economic burden. In Spain, data of total water intake (TWI) are scarce. There is a clear need for a national study that quantifies water and beverage intakes and explores associations between the types of beverages and energy intakes. The Anthropometry, Intake and Energy Balance Study ANIBES is a national survey of diet and nutrition conducted among a representative sample of 2285 healthy participants aged 9-75 years in Spain. Food and beverage intakes were assessed in a food diary over three days. Day and time of beverage consumption were also recorded. On average, TWI was 1.7 L (SE 21.2) for men and 1.6 L (SE 18.9) for women. More than 75% of participants had inadequate TWI, according to European Food Safety Authority (EFSA) recommendations. Mean total energy intake (EI) was 1810 kcal/day (SE 11.1), of which 12% was provided by beverages. Water was the most consumed beverage, followed by milk. The contribution of alcoholic drinks to the EI was near 3%. For caloric soft drinks, a relatively low contribution to the EI was obtained, only 2%. Of eight different types of beverages, the variety score was positively correlated with TWI (r = 0.39) and EI (r = 0.23), suggesting that beverage variety is an indicator of higher consumption of food and drinks. The present study demonstrates that well-conducted surveys such as the ANIBES study have the potential to yield rich contextual value data that can emphasize the need to undertake appropriate health and nutrition policies to increase the total water intake at the population level promoting a healthy Mediterranean hydration pattern.

Energy consumption: Past, present, future

Science.gov (United States)

1973-01-01

The energy consumption history of the United States and the changes which could occur in consumption characteristics in the next 50 years are presented. The various sources of energy are analyzed to show the limitations involved in development and utilization as a function of time available. Several scenarios were prepared to show the consumption and supply of energy under varying conditions.

Energy final consumption projection - 1985/2005 - basic scenery - Minas Gerais State

International Nuclear Information System (INIS)

1989-03-01

A projection of the final energy consumption study for the Minas Gerais State until 2005 year is presented. The conclusion of this projection shows a increasing of 108,8% for the total energy. The industries will be response for 62,0% and the transport sector will use 20,7% of the total energy in 2005. (L.J.C.)

Energy consumption and economic growth: Parametric and non-parametric causality testing for the case of Greece

International Nuclear Information System (INIS)

Dergiades, Theologos; Martinopoulos, Georgios; Tsoulfidis, Lefteris

2013-01-01

The objective of this paper is to contribute towards the understanding of the linear and non-linear causal linkages between energy consumption and economic activity, making use of annual time series data of Greece for the period 1960–2008. Two are the salient features of our study: first, the total energy consumption has been adjusted for qualitative differences among its constituent components through the thermodynamics of energy conversion. In doing so, we rule out the possibility of a misleading inference with respect to causality due to aggregation bias. Second, the investigation of the causal linkage between economic growth and the adjusted for quality total energy consumption is conducted within a non-linear context. Our empirical results reveal significant unidirectional both linear and non-linear causal linkages running from total useful energy to economic growth. These findings may provide valuable information for the contemplation of more effective energy policies with respect to both the consumption of energy and environmental protection. - Highlights: ► The energy consumption and economic growth nexus is investigated for Greece. ► A quality-adjusted energy series is used in our analysis. ► The causality testing procedure is conducted within a non-linear context. ► A causality running from energy consumption to economic growth is verified

China's energy consumption: A perspective from Divisia aggregation approach

International Nuclear Information System (INIS)

Liao, Hua; Wei, Yi-Ming

2010-01-01

China's total energy consumption, according to the official data, decreased impressively during 1997-1998 and increased sharply during 2003-2007, which in turn resulted in energy intensity fluctuation. Many literatures explained this ''unusual phenomenon'' from the perspectives of technical change, economic structure shifting and statistical data quality. They measured aggregate energy in thermal units by using linear summation approaches. In this paper, from the perspectives of heterogeneity and imperfect substitutability among diverse energy types, we further examine China's aggregate energy consumption by using Divisia (Sato-Vartia) approach. The results show that China's aggregate energy consumption and intensity fluctuated slightly less than values calculated by using conventional linear approaches, and the ''unusual phenomenon'' is partly explained. It also implies that China's energy intensity changes in 2006-2007 are slightly more optimistic than those officially reported, and the official communique of provincial energy intensity reduction achievements are partly bias. Some provincial achievement are underestimated or overestimated on some provinces. Our empirical results are also helpful to further research, such as energy-economic modeling, energy price elasticity, and elasticity of substitution among capital-labor-energy-material (KLEM). The difficulties or defects when using Divisia approach are also discussed in this paper. (author)

Energy consumption 2005 with Danish industry

International Nuclear Information System (INIS)

Anon.

2006-01-01

The energy consumption in the Danish industries decreased with 4% from 2003 to 2005. The consumption of liquid fuels and district heat decreased with 27% and 21%, respectively. The consumption of solid fuels increased with 13%. The aim of the statistics is to elucidate the industry's energy consumption and its composition. The statistics present the development in the industry from 1973 to 2005, in which period the composition of the energy consumption has changed significantly. Especially, consumption of liquid fuels has decreased and consumption of gas and electricity has increased. (ln)

On-site energy consumption at softwood sawmills in Montana

Science.gov (United States)

Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

2016-01-01

Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis...

Estimating Energy Consumption of Transport Modes in China Using DEA

Directory of Open Access Journals (Sweden)

Weibin Lin

2015-04-01

Full Text Available The rapid growth of transport requirements in China will incur increasing transport energy demands and associated environmental pressures. In this paper, we employ a generalized data envelopment analysis (DEA to evaluate the relative energy efficiency of rail, road, aviation and water transport from 1971 to 2011 by considering the energy input and passenger-kilometers (PKM and freight ton-kilometers (TKM outputs. The results show that the optimal energy efficiencies observed in 2011 are for rail and water transport, with the opposite observed for the energy efficiencies of aviation and road transport. In addition, we extend the DEA model to estimate future transport energy consumption in China. If each transport mode in 2020 is optimized throughout the observed period, the national transport energy consumption in 2020 will reach 497,701 kilotons coal equivalent (ktce, whereas the annual growth rate from 2011 to 2020 will be 5.7%. Assuming that efficiency improvements occur in this period, the estimated national transport energy consumption in 2020 will be 443,126 ktce, whereas the annual growth rate from 2011 to 2020 will be 4.4%, which is still higher than that of the national total energy consumption (3.8%.

Energy Consumption vs. Energy Requirement

Science.gov (United States)

Fan, L. T.; Zhang, Tengyan; Schlup, John R.

2006-01-01

Energy is necessary for any phenomenon to occur or any process to proceed. Nevertheless, energy is never consumed; instead, it is conserved. What is consumed is available energy, or exergy, accompanied by an increase in entropy. Obviously, the terminology, "energy consumption" is indeed a misnomer although it is ubiquitous in the…

The relationship among energy prices and energy consumption in China

International Nuclear Information System (INIS)

Yuan, Chaoqing; Liu, Sifeng; Wu, Junlong

2010-01-01

The pricing mechanism for energy is not in line with the international standards, because the energy prices are controlled by the government partly or completely in China. Chinese government made a lot of efforts to improve the pricing mechanism for energy. The relations between Chinese energy prices and energy consumption are the foundations to reform the mechanism. In this paper, the relations between Chinese energy consumption and energy prices are researched by cointegration equations, impulse response functions, granger causality and variance decomposition. The cointegration relations among energy prices, energy consumption and economic outputs show that higher energy price will decrease energy consumption in Chinese industrial sectors but will not reduce the economic output in the long run. The cointegration relation between energy price and household energy consumption shows that higher energy price will decrease household energy consumption in the long run and increase it in the short run. So Chinese government should deepen the reform of pricing mechanism for energy, and increase the energy prices reasonably to save energy. (author)

The effect of building regulations and energy conservation measures in domestic sector on national energy consumption

International Nuclear Information System (INIS)

Samo, S.R.; Akhund, M.A.; Brohi, K.M.

2004-01-01

In England, housing accounts for some 30% of total fuel consumption and a similar proportion of energy-related carbon dioxide (CO/sub 2/) emission. A study has been conducted to analyse the effect of the legislations and UK thermal building regulations on national energy consumption in housing. This research paper presents data on the percentage of dwelling stock, the energy consumption, energy cost and carbon dioxide (CO/sub 2/) emission in different types of dwellings, which comply different building regulations from 1965 to 1995. It was found that. 66% of the dwelling stock, which comply the building Regulations before 1965, consumes 73% of total energy used in housing. This dwelling stock is also responsible for 75% of carbon dioxide (CO/sub 2/) emission. Whereas currently only 4% of the dwelling stock complies the latest building regulations 1995 which consume 2 % of energy and produce a similar percentage of carbon dioxide (CO/sub 2/) emission in housing. Since the large portion of the dwelling stock is comprised of old dwellings, therefore the greatest potential for energy conservation measures can be found in improving these dwellings instead of constructing new dwellings. (author)

Commercial and institutional consumption of energy survey : summary report 2005

Energy Technology Data Exchange (ETDEWEB)

Fecteau, V.; Hulan, I.; McNabb, D. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Efficiency

2007-06-15

A survey was conducted on the energy consumption of Canada's commercial and institutional sectors. The primary purpose was to improve the understanding of various aspects of energy consumption in these sector and to enable Natural Resources Canada to develop programs to support institutions that seek to achieve greater energy efficiency and reduce their greenhouse gas emissions. Energy intensity data was presented by energy source and region amongst the following commercial and institutional sectors: retail trade including food and non-food; education including colleges and universities; health care including non-hospital health care and hospitals; and, accommodation and food services. Data obtained on each establishment's energy consumption and floor area were used to calculate their energy intensity ratio. In 2005, the commercial and institutional establishments consumed 1.04 billion gigajoules, nearly double the annual consumption of all private households in Ontario. The total energy intensity was 1.54 GJ per square metre. The lowest energy rating was found in social assistance establishments, while the highest energy rating was in food services and drinking places, followed by hospitals. Quebec and the Atlantic provinces had the lowest energy intensity levels, while the Prairie provinces had the highest energy intensity rate. The survey included data on the age of establishments; the energy sources used for space heating cooling and water heating; establishment spending on energy consumption; and, the use of auxiliary equipment. refs., tabs., figs.

Energy consumption and economic development in Sub-Sahara Africa

International Nuclear Information System (INIS)

Kebede, Ellene; Kagochi, John; Jolly, Curtis M.

2010-01-01

Sub-Saharan African countries' economic development is dependent on energy consumption. This paper assesses total energy demand, which is composed of traditional energy (wood fuel) and commercial energy (electricity and petroleum), in the Central, East, South, and West regions of Sub-Saharan Africa. Cross-sectional time series data for 20 countries in 25 years are analyzed, and the results of the study show that wood fuel accounts for 70% of energy consumption, followed by petroleum, with most industrial activities utilizing some form of wood fuel. Regression results suggest that energy demand is inversely related to the price of petroleum and industrial development, but positively related to GDP, population growth rate, and agricultural expansion, and that price elasticity is less than one. The model results also show that there are regional differences in energy demand. In addition, the interaction of population growth rates by regions generates mixed results, and there are regional differences in the use of commercial energy consumption, and GDP growth. The findings of this study suggest that countries must diversify their energy sources and introduce energy-efficient devices and equipment at all levels of the economy to improve GDP growth rate and GDP per capita. (author)

Energy consumption and economic development in Sub-Sahara Africa

Energy Technology Data Exchange (ETDEWEB)

Kebede, Ellene [Department of Agricultural and Environmental Science, 210 Campbell, Hall, Tuskegee University, Tuskegee, AL 36088 (United States); Kagochi, John [School of Business Administration, University of Houston-Victoria, 3007, N. Ben Wilson, Victoria, 77901 (United States); Jolly, Curtis M. [Department of Agricultural Economics and Rural Sociology, 212 Comer, Hall Auburn University, AL 36849 (United States)

2010-05-15

Sub-Saharan African countries' economic development is dependent on energy consumption. This paper assesses total energy demand, which is composed of traditional energy (wood fuel) and commercial energy (electricity and petroleum), in the Central, East, South, and West regions of Sub-Saharan Africa. Cross-sectional time series data for 20 countries in 25 years are analyzed, and the results of the study show that wood fuel accounts for 70% of energy consumption, followed by petroleum, with most industrial activities utilizing some form of wood fuel. Regression results suggest that energy demand is inversely related to the price of petroleum and industrial development, but positively related to GDP, population growth rate, and agricultural expansion, and that price elasticity is less than one. The model results also show that there are regional differences in energy demand. In addition, the interaction of population growth rates by regions generates mixed results, and there are regional differences in the use of commercial energy consumption, and GDP growth. The findings of this study suggest that countries must diversify their energy sources and introduce energy-efficient devices and equipment at all levels of the economy to improve GDP growth rate and GDP per capita. (author)

Analysis of energy consumption at the Rzeszów Wastewater Treatment Plant

OpenAIRE

Masłoń Adam

2017-01-01

Wastewater treatment plants can be classified as energy-intensive facilities, as they account for up to 35 percent of municipal energy consumption. Pumps and aeration systems consume a significant portion of energy within the wastewater plants in particular. The cost of energy consumption for wastewater treatment processes reaches up to 40% of the total operating cost. In case of the WWTPs with the activated sludge systems, about 50% of energy is used for aeration and mixing purposes. At WWTP...

Investigation and analysis on the energy consumption of starred hotel buildings in Hainan Province, the tropical region of China

International Nuclear Information System (INIS)

Lu, Shilei; Wei, Shasha; Zhang, Ke; Kong, Xiangfei; Wu, Wei

2013-01-01

Highlights: • Normalization energy utilization indicators regression model is established. • Total and subentry normalization energy utilization indicators have been obtained and reported. • Found the key points in influencing hotels’ total and subentry energy consumption. • Discussed the best selection of building envelops to reduce the hotels’ energy consumption. - Abstract: This paper reported a study of energy consumption of 27 starred hotels in Hainan Province. Total and subentry energy consumption indicators were defined to indicate the building energy efficiency after collecting the building basic information and energy consumption of these hotels. Eighteen potential independent significant factors were selected to analyze energy utilization indicators (EUIs) and the climate adjusted energy utilization indicators (EUI clt ) were calculated by using the degree-day method. Then, multiple regression analysis between EUI clt and continuous scale factors was applied to establish the normalization EUI data model and results indicated that the electricity percentage, number of guestrooms and equivalent guestrooms are the key points influencing total energy efficiency of hotels. Lastly, on the basis of multi-factor analysis of variance (ANOVA) between the EUI norm and categorical factors of the sampled hotel buildings, double glazing window is the significant factor that influences the total unit energy consumption greatly

Modeling the relationship between energy consumption and economy development in China

International Nuclear Information System (INIS)

Zhang, Jing; Deng, Shihuai; Shen, Fei; Yang, Xinyao; Liu, Guodong; Guo, Hang; Li, Yuanwei; Hong, Xiao; Zhang, Yanzong; Peng, Hong; Zhang, Xiaohong; Li, Li; Wang, Yingjun

2011-01-01

This paper investigated the empirical relationship between economy development and energy consumption by material production, nonmaterial production and household. Empirical models accounting for the key influential factors were constructed. Ordinary Least Square Regression (OLS) analysis of the official data of China for the year 1985-2007 permitted the relationship between individual energy consumption components and the corresponding coefficients to be investigated. The results showed that (1) the Unit Energy Consumption by Primary Industry (UECPI), Secondary Industry (UECSI), and Tertiary Industry (UECTI) demonstrated an inverse relationship with Gross Domestic Product (GDP); (2) a linear relationship exists between the Energy Consumption by Nonmaterial Production (ECNP) and GDP; (3) the hypotheses that there is an inverse S-shaped relationship between Unit Energy Consumption by Household (UECH) and Personal Income (PI) is valid. Based on the above findings and an analysis of China's energy policies, suggestions on China's energy policy were given in the end. -- Highlights: → Decomposed total energy consumption in three parts, branch of material produces, branch of the immaterial production, and households. → Energy consumed by branch of material produces considered the economic scale and construction. → Energy consumed by immaterial production was first referred in this article. → The relationship between energy consumed by household and GDP fits the invert-S curve, which is first referred too.

Smart campus: Data on energy consumption in an ICT-driven university

Directory of Open Access Journals (Sweden)

Segun I. Popoola

2018-02-01

Full Text Available In this data article, we present a comprehensive dataset on electrical energy consumption in a university that is practically driven by Information and Communication Technologies (ICTs. The total amount of electricity consumed at Covenant University, Ota, Nigeria was measured, monitored, and recorded on daily basis for a period of 12 consecutive months (January–December, 2016. Energy readings were observed from the digital energy meter (EDMI Mk10E located at the distribution substation that supplies electricity to the university community. The complete energy data are clearly presented in tables and graphs for relevant utility and potential reuse. Also, descriptive first-order statistical analyses of the energy data are provided in this data article. For each month, the histogram distribution and time series plot of the monthly energy consumption data are analyzed to show insightful trends of energy consumption in the university. Furthermore, data on the significant differences in the means of daily energy consumption are made available as obtained from one-way Analysis of Variance (ANOVA and multiple comparison post-hoc tests. The information provided in this data article will foster research development in the areas of energy efficiency, planning, policy formulation, and management towards the realization of smart campuses. Keywords: Smart campus, Energy consumption, Energy efficiency, Load forecasting, Energy management

Assessing the Energy Consumption of Smartphone Applications

Science.gov (United States)

Abousaleh, Mustafa M.

Mobile devices are increasingly becoming essential in people's lives. The advancement in technology and mobility factor are allowing users to utilize mobile devices for communication, entertainment, financial planning, fitness tracking, etc. As a result, mobile applications are also becoming important factors contributing to user utility. However, battery capacity is the limiting factor impacting the quality of user experience. Hence, it is imperative to understand how much energy impact do mobile apps have on the system relative to other device activities. This thesis presents a systematic studying of the energy impact of mobile apps features. Time-series electrical current measurements are collected from 4 different modern smartphones. Statistical analysis methodologies are used to calculate the energy impact of each app feature by identifying and extracting mobile app-feature events from the overall current signal. In addition, the app overhead energy costs are also computed. Total energy consumption equations for each component is developed and an overall total energy consumption equation is presented. Minutes Lost (ML) of normal phone operations due to the energy consumption of the mobile app functionality is computed for cases where the mobile app is simulated to run on the various devices for 30 minutes. Tutela Technologies Inc. mobile app, NAT, is used for this study. NAT has two main features: QoS and Throughput. The impact of the QoS feature is indistinguishable, i.e. ML is zero, relative to other phone activities. The ML with only the TP feature enabled is on average 2.1 minutes. Enabling the GPS increases the ML on average to 11.5 minutes. Displaying the app GUI interface in addition to running the app features and enabling the GPS results in an average ML of 12.4 minutes. Amongst the various mobile app features and components studied, the GPS consumes the highest amount of energy. It is estimated that the GPS increases the ML by about 448%.

Energy consumption trends in Lithuania

International Nuclear Information System (INIS)

Galinis, A.; Miskinis, V.

2000-01-01

The paper describes some problems related to integration into EU, current state of the Lithuania economy and energy sector and changes in energy consumption during transition period. It provides and analysis of the main indicators of energy consumption, such as the ratio of primary energy consumption to Gross Domestic Product (GDP), primary and final energy intensity and others based on estimates of Purchasing Power Parity. The paper also discusses problems arising at evaluation of economical and energy indices for the countries in transition and compares them with those existing in other countries of Central and Eastern Europe and in Western countries. It shows uneven tendencies of energy intensity occurring under transitions in Lithuania and other Baltic States. (author)

Nonresidential buildings energy consumption survey: 1979 consumption and expenditures. Part 2. Steam, fuel oil, LPG, and all fuels

Energy Technology Data Exchange (ETDEWEB)

Patinkin, L.

1983-12-01

This report presents data on square footage and on total energy consumption and expenditures for commercial buildings in the contiguous United States. Also included are detailed consumption and expenditures tables for fuel oil or kerosene, liquid petroleum gas (LPG), and purchased steam. Commercial buildings include all nonresidential buildings with the exception of those where industrial activities occupy more of the total square footage than any other type of activity. 7 figures, 23 tables.

Caffeine-containing beverages, total fluid consumption, and premenstrual syndrome.

Science.gov (United States)

Rossignol, A M; Bonnlander, H

1990-09-01

The main objective of this study was to evaluate whether daily consumption of caffeine-containing beverages is related to the prevalence and severity of premenstrual syndrome apart from any effects of daily total fluid consumption. A secondary objective was to determine whether daily total fluid consumption itself is related to premenstrual syndrome. The study is based on 841 responses to a questionnaire probing menstrual and premenstrual health, and daily fluid consumption, which was mailed to female university students in Oregon. Analysis of the data revealed that consumption of caffeine-containing beverages was strongly related to the prevalence of premenstrual syndrome. Among women with more severe symptoms, the relation between consumption of caffeine-containing beverages and premenstrual syndrome was dose-dependent, with prevalence odds ratios equal to 1.3 for consumers of one cup of a caffeine-containing beverage per day and increasing steadily to 7.0 for consumers of eight to 10 cups per day. The effects were apparent among both caffeine-containing tea/coffee consumers and caffeine-containing soda consumers. The observed effects were only slightly reduced when daily total fluid consumption was controlled. Daily total fluid consumption also was related to the prevalence of premenstrual symptoms although the effects were large only for consumers of 13-19 cups of fluid per day (the largest amount studied).

Beverage Consumption Habits and Association with Total Water and Energy Intakes in the Spanish Population: Findings of the ANIBES Study

Directory of Open Access Journals (Sweden)

Mariela Nissensohn

2016-04-01

Full Text Available Background: Inadequate hydration is a public health issue that imposes a significant economic burden. In Spain, data of total water intake (TWI are scarce. There is a clear need for a national study that quantifies water and beverage intakes and explores associations between the types of beverages and energy intakes. Methods: The Anthropometry, Intake and Energy Balance Study ANIBES is a national survey of diet and nutrition conducted among a representative sample of 2285 healthy participants aged 9–75 years in Spain. Food and beverage intakes were assessed in a food diary over three days. Day and time of beverage consumption were also recorded. Results: On average, TWI was 1.7 L (SE 21.2 for men and 1.6 L (SE 18.9 for women. More than 75% of participants had inadequate TWI, according to European Food Safety Authority (EFSA recommendations. Mean total energy intake (EI was 1810 kcal/day (SE 11.1, of which 12% was provided by beverages. Water was the most consumed beverage, followed by milk. The contribution of alcoholic drinks to the EI was near 3%. For caloric soft drinks, a relatively low contribution to the EI was obtained, only 2%. Of eight different types of beverages, the variety score was positively correlated with TWI (r = 0.39 and EI (r = 0.23, suggesting that beverage variety is an indicator of higher consumption of food and drinks. Conclusions: The present study demonstrates that well-conducted surveys such as the ANIBES study have the potential to yield rich contextual value data that can emphasize the need to undertake appropriate health and nutrition policies to increase the total water intake at the population level promoting a healthy Mediterranean hydration pattern.

Beverage Consumption Habits and Association with Total Water and Energy Intakes in the Spanish Population: Findings of the ANIBES Study

Science.gov (United States)

Nissensohn, Mariela; Sánchez-Villegas, Almudena; Ortega, Rosa M.; Aranceta-Bartrina, Javier; Gil, Ángel; González-Gross, Marcela; Varela-Moreiras, Gregorio; Serra-Majem, Lluis

2016-01-01

Background: Inadequate hydration is a public health issue that imposes a significant economic burden. In Spain, data of total water intake (TWI) are scarce. There is a clear need for a national study that quantifies water and beverage intakes and explores associations between the types of beverages and energy intakes. Methods: The Anthropometry, Intake and Energy Balance Study ANIBES is a national survey of diet and nutrition conducted among a representative sample of 2285 healthy participants aged 9–75 years in Spain. Food and beverage intakes were assessed in a food diary over three days. Day and time of beverage consumption were also recorded. Results: On average, TWI was 1.7 L (SE 21.2) for men and 1.6 L (SE 18.9) for women. More than 75% of participants had inadequate TWI, according to European Food Safety Authority (EFSA) recommendations. Mean total energy intake (EI) was 1810 kcal/day (SE 11.1), of which 12% was provided by beverages. Water was the most consumed beverage, followed by milk. The contribution of alcoholic drinks to the EI was near 3%. For caloric soft drinks, a relatively low contribution to the EI was obtained, only 2%. Of eight different types of beverages, the variety score was positively correlated with TWI (r = 0.39) and EI (r = 0.23), suggesting that beverage variety is an indicator of higher consumption of food and drinks. Conclusions: The present study demonstrates that well-conducted surveys such as the ANIBES study have the potential to yield rich contextual value data that can emphasize the need to undertake appropriate health and nutrition policies to increase the total water intake at the population level promoting a healthy Mediterranean hydration pattern. PMID:27104564

10 CFR 431.64 - Uniform test method for the measurement of energy consumption of commercial refrigerators...

Science.gov (United States)

2010-01-01

... consumption of commercial refrigerators, freezers, and refrigerator-freezers. 431.64 Section 431.64 Energy... method for the measurement of energy consumption of commercial refrigerators, freezers, and refrigerator... energy consumption in kilowatt hours per day (kWh/day) for a given product category and volume or total...

Combining total energy and energy industrial center concepts to increase utilization efficiency of geothermal energy

Science.gov (United States)

Bayliss, B. P.

1974-01-01

Integrating energy production and energy consumption to produce a total energy system within an energy industrial center which would result in more power production from a given energy source and less pollution of the environment is discussed. Strong governmental support would be required for the crash drilling program necessary to implement these concepts. Cooperation among the federal agencies, power producers, and private industry would be essential in avoiding redundant and fruitless projects, and in exploiting most efficiently our geothermal resources.

Estimates of the cost and energy consumption of aluminum-air electric vehicles

Science.gov (United States)

Cooper, J. F.

1980-11-01

Economic costs and primary energy consumption are estimated for general purpose electric vehicles using aluminum-air propulsion batteries within the time frame of the 1990's (earliest possible date of introduction). For an aluminum-air fuel economy of 36 tonne/km/kg-Al (optimized low-gallium alloys), a total refueling cost of 5.6 cents/km (1979$) was estimated for a 1.27 tonne vehicle. This is equivalent to $2 to 3/gal for automobiles of the same weight with fuel economies of 13.5 to 19.3 tonne-km/liter. The total primary energy consumption was estimated to be 1.3 to 1.7 kWh/km (coal) for the electric vehicle, which corresponds roughly to the energy cost of the automobiles using liquid fuels synthesized from coal. The energy consumption is 30 to 70 percent greater than the reference automobile using petroleum-derived gasoline.

Energy consumption trends in Hawaii

International Nuclear Information System (INIS)

Kaya, Abidin; Yalcintas, Melek

2010-01-01

This study begins with a review of energy consumption by end-use sector in Hawaii. Then, the energy generated from renewable energy sources is analyzed between 1991 and 2006. The results show that while geothermal is a considerable source of renewable energy on the Island of Hawaii (also known as Big Island), fossil fuel is the main energy source in the State of Hawaii. The energy intensity index for the State of Hawaii is then calculated by dividing energy consumption per capita by the income per capita. The calculated energy intensity index reveals that energy consumption is directly controlled by per capita income. The results also indicate that the energy intensity index increases over time despite positive developments in energy efficient technologies. In the second part of the paper, the effect of the tourism industry on energy usage in the State of Hawaii is analyzed. The results show that tourism volume, measured in terms of tourist arrival numbers, does not change the energy consumption directly. However, a change in tourism volume does affect per capita income within a few months to a year. In the last part of the study, the energy efficiency index of Hawaii is compared with consumption averages for the US, California and the most energy efficient country in Europe, Denmark. The comparison shows that Hawaii lags behind California and Denmark in terms of energy efficiency. The comparison also shows that an increase in energy efficiency corresponds to an increase in per capita income across the board, which is in agreement with a recent report published by the American Physical Society.

Energy consumption and conservation, evaluation

International Nuclear Information System (INIS)

Acket, C.

2006-04-01

The energy consumption is increasing of more than 1% each year. It is necessary to slow down this growth and much better to inverse it. Observing the main consumption posts, energy saving is possible at short dated for the residential sector and medium and long dated for the transports and the industry. Anyway the individual behaviors are essential. The author presents the situation for each posts, providing data on the energy consumption and saving and recommendations. (A.L.B.)

Energy consumption of sport halls

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

The energy consumption of Finland's sports halls (ball games halls, ice hockey halls and swimming halls) represent approximately 1% of that of the country's whole building stock. In the light of the facts revealed by the energy study the potential energy saving rate in sports halls is 15-25%. The total savings would be something like FIM 30-40 million per annum, of which about a half would be achieved without energy-economic investments only by changing utilization habits and by automatic control measures. The energy-economic investments are for the most part connected with ventilation and their repayment period is from one to five years. On the basis of the energy study the following specific consumption are presented as target values: swimming halls: heat (kWh/m*H3/a)100, electricity (kWh/m*H3/a)35, water (l/m*H3/a)1000 icehockey halls (warm): heat (kWh/m*H3/a)25, electricity (kWh/m*H3/a)15, water (l/m*H3/a)200, ball games halls (multi-purpose halls): heat (kWh/m*H3/a)30, electricity (kWh/m*H3/a)25, water (l/m*H3/a)130. In the study the following points proved to be the central areas of energy saving in sports halls: 1. Flexible regulation of the temperature in sports spaces on the basis of the sport in question. 2. The ventilation of swimming halls should be adjusted in such a way that the humidity of the hall air would comply with the limit humidity curve determined by the quality of structures and the temperature of the outdoor air. 3. An ice skating hall is an establishment producing condensing energy from 8 to 9 months a year worth of approx. 100.000-150.000 Finnmarks. The development of the recovery of condensing energy has become more important. 4. The ventilation of ball games halls may account for over 50% of the energy consumption of the whole building. Therefore special attention should be paid to the optimatization of ventilation as a whole.

Scheduling home-appliances to optimize energy consumption

DEFF Research Database (Denmark)

Rossello Busquet, Ana

In order to optimize the energy consumption, energy demand peaks should be avoided, and energy consumption should be smoothly distributed over time. This can be achieved by setting a maximum energy consumption per user’s household. In other words, the overall consumption of the user’s appliances...

An Analysis of energy consumption and economic growth of Cobb-Douglas production function based on ECM

Science.gov (United States)

Guo, Wei-wei

2018-02-01

Energy is one of the important factors affecting economic growth, the motive force of the economic development of countries in the world, essential for the world economic development and people’s living material resources, an important resource of the relationship between the national economies. The paper sums up the evaluation and literatures on energy consumption and economic growth at home and abroad, thinks “southern talk” as the energy consumption and economic growth in the time division, makes a series of empirical tests on the relationship between total energy consumption and economic growth in China from 1978 to 1991 and from 1992 to 2016.The results show that total energy consumption is a one-way causal relationship between economic growths in china, Economic growth has a strong dependence on energy, there is a co-integration relationship between energy consumption and economic growth. However, economic growth depends on the energy consumption decreased year by year in China, The way of economic growth is changing from the extensive economic growth mode to intensive mode of economic growth.

Manufacturing consumption of energy 1991

Energy Technology Data Exchange (ETDEWEB)

1994-12-01

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

The world energy consumption in 2005

International Nuclear Information System (INIS)

Lapillonne, B.

2006-01-01

Based on Enerdata 2005 data, this analysis presents the situation of the world energy consumption in 2005, the electric power consumption per region and production per source, the consumption increase for each energy source and the petroleum and gas consumption increase. (A.L.B.)

The Factors Influencing Transport Energy Consumption in Urban Areas: a Review

Directory of Open Access Journals (Sweden)

Rocco Papa

2014-05-01

Full Text Available Transport energy consumption accounts for about one third of total energy consumption in EU. Despite significant advances in transport technology and fuel formulation, transport energy consumption has increased in most EU countries over the last three decades. This increase in consumption occurred as a result of factors such as higher car ownership, a growth in automobile use and an increase in vehicle distances traveled. As travel and land-use are a function of one another, it is often hypothesized that changing urban structure can result in changes in energy consumption. Understanding how different land use characteristics may influence travel behaviour and the corresponding energy consumption is crucial for planners and policy makers in order to develop strategic actions to shrink the environmental footprint of the urban transportation sector. The aim of this article is to review the current literature on the connections between land use, travel behavior and energy consumption. In particular, this paper seeks to identify the determinants of transport energy consumption in urban areas by reviewing evidence from empirical studies. To this aim, nine characteristics of land use are presented and their effects on both travel behaviour and energy use are discussed Our review shown that, in contrast to the focus on the effect of the built environment on travel, only few researchers have empirically investigated the linkage between the built environment and transportation energy use. The research described in this paper has been developed within the PON04a2_E Smart Energy Master project. It represents part of a much broader research project aimed at the development of an integrated model of urban energy efficiency.

Energy consumption in office buildings. Trends and drivers; Energibruk i kontorbygg. Trender og drivere

Energy Technology Data Exchange (ETDEWEB)

Langseth, Benedicte

2013-02-01

This report focuses on the energy usage of Norwegian office buildings. Historic data on the subject is limited, so qualitative input is gathered through interviews with property owners and contractors for energy solutions. We have looked at what affects the total area of office buildings in Norway, and realized that it more or less follows the inland gross domestic product. The report also includes cross-sectional analyses from various data sources to find what affects the specific energy usage of office buildings. The actual measured consumption deviates from estimated consumption, especially in newer buildings and especially within ventilation and cooling. Additionally, a model has been developed for projective purposes. It is well suited to test the effect of various input parameters and assumptions on the total area of office buildings and their energy consumption. Though as of yet the quality of data is not good enough to make a profound and credible estimate of total energy usage.(eb)

Evaluation of energy consumption during aerobic sewage sludge treatment in dairy wastewater treatment plant.

Science.gov (United States)

Dąbrowski, Wojciech; Żyłka, Radosław; Malinowski, Paweł

2017-02-01

The subject of the research conducted in an operating dairy wastewater treatment plant (WWTP) was to examine electric energy consumption during sewage sludge treatment. The excess sewage sludge was aerobically stabilized and dewatered with a screw press. Organic matter varied from 48% to 56% in sludge after stabilization and dewatering. It proves that sludge was properly stabilized and it was possible to apply it as a fertilizer. Measurement factors for electric energy consumption for mechanically dewatered sewage sludge were determined, which ranged between 0.94 and 1.5 kWhm -3 with the average value at 1.17 kWhm -3 . The shares of devices used for sludge dewatering and aerobic stabilization in the total energy consumption of the plant were also established, which were 3% and 25% respectively. A model of energy consumption during sewage sludge treatment was estimated according to experimental data. Two models were applied: linear regression for dewatering process and segmented linear regression for aerobic stabilization. The segmented linear regression model was also applied to total energy consumption during sewage sludge treatment in the examined dairy WWTP. The research constitutes an introduction for further studies on defining a mathematical model used to optimize electric energy consumption by dairy WWTPs. Copyright © 2016 Elsevier Inc. All rights reserved.

Turkey's net energy consumption

International Nuclear Information System (INIS)

Soezen, Adnan; Arcaklioglu, Erol; Oezkaymak, Mehmet

2005-01-01

The main goal of this study is to develop the equations for forecasting net energy consumption (NEC) using an artificial neural-network (ANN) technique in order to determine the future level of energy consumption in Turkey. In this study, two different models were used in order to train the neural network. In one of them, population, gross generation, installed capacity and years are used in the input layer of the network (Model 1). Other energy sources are used in input layer of network (Model 2). The net energy consumption is in the output layer for two models. Data from 1975 to 2003 are used for the training. Three years (1981, 1994 and 2003) are used only as test data to confirm this method. The statistical coefficients of multiple determinations (R 2 -value) for training data are equal to 0.99944 and 0.99913 for Models 1 and 2, respectively. Similarly, R 2 values for testing data are equal to 0.997386 and 0.999558 for Models 1 and 2, respectively. According to the results, the net energy consumption using the ANN technique has been predicted with acceptable accuracy. Apart from reducing the whole time required, with the ANN approach, it is possible to find solutions that make energy applications more viable and thus more attractive to potential users. It is also expected that this study will be helpful in developing highly applicable energy policies

Optimal selection among different domestic energy consumption patterns based on energy and exergy analysis

International Nuclear Information System (INIS)

Lu, S.; Wu, J.Y.

2010-01-01

In China market, people have many choices for air conditioning of their apartments, including heat-pump systems or gas-fired boilers for heating and air conditioners for cooling. Domestic hot water is usually provided by domestic water heaters making use of electricity or natural gas, which are known for their great energy costs. These systems consume much energy and increase the total cost of required domestic energy. A novel system combining heat pump with water heater is proposed in this paper, and it is named domestic energy system. The system can realize the provision of space heating, cooling and domestic hot water throughout a year. Based on different types of air conditioners, space heating equipments and water heaters, domestic energy consumption patterns are concluded to be eight categories. This study describes and compares the eight domestic energy consumption patterns by economic analysis and prime energy analysis method. Results show that the domestic energy system can provide good economy and save energy significantly. Furthermore, exergy analysis method is employed to compare the exergy efficiencies of different energy consumption systems. The results show that the domestic energy system has the highest energy conversion efficiency and can make remarkable contribution to social energy saving.

Household Energy Consumption Behaviour for Different Demographic Regions in Thailand from 2000 to 2010

Directory of Open Access Journals (Sweden)

Tharinya Supasa

2017-12-01

Full Text Available Since 1995, the residential sector has been a fast-growing energy consumption sector in Thailand. This sector contributes dramatically to the growth of Thailand’s electricity and oil demand. Our study analysed Thailand’s residential energy consumption characteristics and the seven underlying factors affecting the growth in energy use of five demographic regions using an energy input–output method. Embodied energy decomposition revealed that direct energy consumption accounted for approximately 30% of total residential energy use, whereas indirect energy consumption was at 70%. During the studied period, the growth in indirect energy use for all household groups was primarily the result of higher consumption of ‘commerce’, ‘air transport’, ‘manufacturing’, ‘food and beverages’ and ‘agriculture’ products. Moreover, each influencing driver contributes differently to each household’s growth in energy demand. The number of households was the leading factor that dominated the increases in residential energy use in the Greater Bangkok and Central regions. Growth in residential energy consumption in the Northern, Northeastern and Southern regions was strongly dominated by changes in income per capita. Consumption structure and using energy-efficient products had a moderate impact on all regions’ energy consumption. Thus, our findings provide additional energy-saving strategies to restrain further growth in residential energy demand.

Trade and energy consumption in the Middle East

International Nuclear Information System (INIS)

Sadorsky, Perry

2011-01-01

Over the past 30 years many economies have experienced large increases in economic trade, income and energy consumption. This brings up an interesting question. How do increases in trade affect energy consumption? This study uses panel cointegration data estimation techniques to examine the impact of trade on energy consumption in a sample of 8 Middle Eastern countries covering the period 1980 to 2007. Short-run dynamics show Granger causality from exports to energy consumption, and a bi-directional feedback relationship between imports and energy consumption. Long run elasticities estimated from FMOLS show that a 1% increase in per capita exports increases per capita energy consumption by 0.11% while a one percent increase in per capita imports increases per capita energy consumption by 0.04%. These results are important in establishing that increased trade affects energy demand in the Middle East in both the short and long-run. This has implications for energy policy and environmental policy. - Research Highlights: → Trade affects energy consumption in Middle Eastern economies. → Short-run causality runs from exports to energy consumption. → There is a short-run feedback relationship between energy consumption and imports. → In the long-run a 1% increase in per capita exports increases per capita energy consumption by 0.11%. → In the long-run a 1% increase in per capita imports increases per capita energy consumption by 0.04%.

[Energy Consumption Comparison and Energy Saving Approaches for Different Wastewater Treatment Processes in a Large-scale Reclaimed Water Plant].

Science.gov (United States)

Yang, Min; Li, Ya-ming; Wei, Yuan-song; Lü, Jian; Yu, Da-wei; Liu, Ji-bao; Fan, Yao-bo

2015-06-01

Energy consumption is the main performance indicator of reclaimed water plant (RWP) operation. Methods of specific energy consumption analysis, unit energy consumption analysis and redundancy analysis were applied to investigate the composition and spatio-temporal distribution of energy consumption in Qinghe RWP with inverted A2/O, A2/O and A2/O-MBR processes. And the A2/ O-MBR process was mainly analyzed to identify the main nodes and causes for high energy consumption, approaches for energy saving were explored, and the energy consumption before and after upgrading for energy saving was compared. The results showed that aeration was the key factor affecting energy consumption in both conventional and A2/O-MBR processes, accounting for 42.97% and 50.65% of total energy consumption, respectively. A pulsating aeration allowed an increasing membrane flux and remarkably reduced the energy consumption of the A2/O-MBR process while still meeting the effluent standard, e.g., the membrane flux was increased by 20%, and the energy consumptions per kiloton wastewater and kilogram COD(removed) were decreased by 42.39% to 0.53 kW-h-kg-3 and by 54.74% to 1.29 kW x h x kg(-1), respectively. The decrease of backflow ratio in the A2/O-MBR process within a certain range would not deteriorate the effluent quality due to its insignificant correlation with the effluent quality, and therefore may be considered as one of the ways for further energy saving.

Energy information. Status, cost, and need for energy, consumption and fuel switching data

International Nuclear Information System (INIS)

Fultz, Keith O.; Milans, Flora H.; Hale, Richard A.; Weaver, Joanne E.; D'Amico, Nicholas C.

1989-04-01

In 1986, EIA's Manufacturing Energy Consumption Survey collected calendar year 1985 fuel switching and energy consumption information from a sample of manufacturers. Although the construction, agriculture, mining, fishing, and forestry segments of the industrial sector were not surveyed, in 1985 the manufacturing segment accounted for about 75 to 80 percent of the total energy consumed in the industrial sector. The results of the energy consumption segment of the survey were published in November 1988, and the results of the fuel switching segment were published in December 1988. In 1989, EIA will conduct the second triennial survey, collecting energy consumption and fuel switching data for 1988. EIA estimated that the cost of the survey to the U.S. government, consisting of EIA and Census Bureau costs to design and conduct the survey, was about $1.8 million (in 1988 dollars) and that the cost to the manufacturers participating in the survey was more than $4 million (in 1988 dollars). According to EIA's justification to the Office of Management and Budget (OMB) for the survey, most of the potential users of the survey data were federal offices. Officials of seven of the eight federal offices we contacted indicated various uses for the energy consumption data, such as updating the national input-output tables and energy accounts, analyzing the competitiveness of U.S. industries, and doing energy emergency contingency planning. Officials of five of the eight federal offices indicated uses for the fuel switching data and most frequently cited its use for contingency planning for emergencies or supply disruptions. EIA's justification to OMB also identified 17 states as potential users, but officials of the 3 state offices that we contacted told us that the EIA data would not be useful because it cannot be summarized for individual states

Analysis of rural residential energy consumption and corresponding carbon emissions in China

International Nuclear Information System (INIS)

Yao Chunsheng; Chen Chongying; Li Ming

2012-01-01

The analysis of rural residential energy consumption in China from 2001 to 2008 and corresponding impacts on climate change is presented in the paper. It is found that rural residential energy consumption has shown obvious transition from non-commercial energy to commercial energy. The percentage of biomass energy consumption dropped from 81.5% in 2001 to 70.9% in 2008, while the percentage of commercial energy increased from 17.1% to 25.1%. Besides, other renewable energy increased very fast with annual growth rate of 19.8%. Correspondingly, total CO 2 emissions from rural residential energy consumption had significant increase from 152.2 Million tons in 2001 to 283.6 Million tons in 2008. The annual growth rate of per capita CO 2 emissions was nearly 2 times faster than that of urban area. The major driving force for the consumption of commercial energy was the income of rural farmers, while strong rural energy policies supported the development of renewable energy. To satisfy the goals of energy supply and CO 2 emissions reduction in rural areas, it is advised to change the energy structure and improve the energy efficiency, such as to generate electricity using renewable technologies and to replace coal with modern biomass energy for cooking and heating. - Highlights: ► This study analyzed rural residential energy consumption in China 2001–2008. ► It shows obvious transition from non-commercial energy to commercial energy. ► CO 2 emissions from rural residential energy consumption have significant increases. ► Major driving forces are income of rural farmers and rural energy policies. ► Generate electricity using renewable technology and replace coal with modern biomass.

Decomposition analysis of energy consumption for an freeway during its operation period: A case study for Guangdong, China

International Nuclear Information System (INIS)

Li, DuoQi; Wang, DuanYi

2016-01-01

Freeways have become the main subject of energy conservation reviews in China because of their large energy consumption. Decomposition analysis has been widely applied in energy consumption studies. However, most studies have only analyzed the driving forces of energy consumption on the national level, and seldom at smaller levels, e.g. for departments like toll stations and maintenance centers. Based on the characteristics of the freeway operation period, this paper serves as a preliminary attempt at applying the logarithm mean Divisia index method I on the department level to analyze the energy consumption of freeways during the operation period. To elucidate the evolution of energy consumption during the operational period, the logarithm mean Divisia index analysis was performed to disentangle the energy consumption based on a real case in Guangdong from 2005 to 2013. The analyses establish that the traffic volume influences energy consumption. The results show that some departments can influence the total energy consumption. For example, the tunnels and toll stations are key factors that influence the total energy consumption of the whole road. The decomposition in the departments revealed that energy efficiency improvements caused by the use of alternate materials and energy-saving technologies mainly contributed to energy conservation. - Highlights: • Decomposition model was used to analyze energy consumption of freeway management. • This attempt finds the impact of traffic volume on management energy consumption. • Tunnels and toll stations mainly affect the management energy consumption. • Using alternate materials and energy-saving technology improved energy efficiency.

Modeling GHG emission and energy consumption in selected greenhouses in Iran

Energy Technology Data Exchange (ETDEWEB)

Yousefi, M.; Omid, M.; Rafiee, SH.; Khoshnevisan, B. [Department of Agricultural Machinery Engineering, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj (Iran, Islamic Republic of)

2013-07-01

It is crucial to determine energy efficiency and environmental effects of greenhouse productions. Such study can be a viable solution in probing challenges and existing defects. The aims of this study were to analyze energy consumption and greenhouse gas (GHG) emissions for pepper production using biological method inside greenhouses which used natural gas (NG) heating system in Esfahan province. Data were collected from 22 greenhouse holders using a face to face questionnaire method, in 2010-2011. Also, functional area was selected 1000 m2. Total energy input, total energy output, energy ratio, energy productivity, specific energy, net energy gain and total GHG emissions were calculated as 297799.9 MJ area-1, 3851.84 MJ area-1, 0.013, 0.016 kg MJ-1, 61.85 MJ kg-1, -293948 MJ area-1 and 14390.85 kg CO2 equivalent area-1, respectively. Result revealed that replacing diesel fuel with NG will not be an effective way of reducing energy consumption for greenhouse production. However, it is crucial to focus on energy management in order to enhance the energy and environmental indices. One way to supply adequate input energy and a reduction in GHG emissions is the utilization of renewable and clean energy sources instead of NG and diesel fuel. Also, it is suggested to adopt solar greenhouses in the region and to supply electricity from non-fossil sources seriously.

Optimized design of total energy systems: The RETE project

Science.gov (United States)

Alia, P.; Dallavalle, F.; Denard, C.; Sanson, F.; Veneziani, S.; Spagni, G.

1980-05-01

The RETE (Reggio Emilia Total Energy) project is discussed. The total energy system (TES) was developed to achieve the maximum quality matching on the thermal energy side between plant and user and perform an open scheme on the electrical energy side by connection with the Italian electrical network. The most significant qualitative considerations at the basis of the plant economic energy optimization and the selection of the operating criterion most fitting the user consumption characteristics and the external system constraints are reported. The design methodology described results in a TES that: in energy terms achieves a total efficiency evaluated on a yearly basis to be equal to about 78 percent and a fuel saving of about 28 percent and in economic terms allows a recovery of the investment required as to conventional solutions, in about seven years.

Measurement of inequality using household energy consumption data in rural China

Science.gov (United States)

Wu, Shimei; Zheng, Xinye; Wei, Chu

2017-10-01

Measuring inequality can be challenging due to the limitations of using household income or expenditure data. Because actual energy consumption can be measured more easily and accurately and is relatively more stable, it may be a better measure of inequality. Here we use data on energy consumption for specific devices from a large nation-wide household survey (n = 3,404 rural households from 12 provinces) to assess inequality in rural China. We find that the overall inequality of energy consumption and expenditure varies greatly in terms of energy type, end-use demand, regions and climatic zones. Biomass, space heating and cooking, intraregional differences, and climatic zones characterized as cold or hot summer/cold winter contribute the most to total inequality for each indicator, respectively. The results suggest that the expansion of infrastructure does not accompany alleviation of energy inequality, and that energy affordability should be improved through income growth and targeted safety-net programmes instead of energy subsidies.

Energy consumptions per sector; Les consommations d'energie par secteur

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document presents the energy consumption data of France per energy type and sector of use in the form of tables and graphics for the last decade and sometimes before: 1 - residential and tertiary sector: energy consumption per energy source, energy consumption per use (coal, heavy and domestic fuels, natural gas, LPG (butane, propane), electricity), comparison of the share of each energy source between 1973 and 2003, 20 years of space heating data in main dwellings (1982-2002), district heating networks from 1987 to 1997; 2 - transportation sector: fuel consumption of individual cars in France (1990-2003, 1990-2002, 1990-2001, 1987-1999), some indicators about the energy consumption in transports in France (2000-2001); 3 - industry sector: consumption of fuel substitutes in the cement industry in 2001, importance and limitations. (J.S.)

Analysis and modelling of the energy consumption of chemical batch plants

Energy Technology Data Exchange (ETDEWEB)

Bieler, P.S.

2004-07-01

This report for the Swiss Federal Office of Energy (SFOE) describes two different approaches for the energy analysis and modelling of chemical batch plants. A top-down model consisting of a linear equation based on the specific energy consumption per ton of production output and the base consumption of the plant is postulated. The model is shown to be applicable to single and multi-product batches for batch plants with constant production mix and multi-purpose batch plants in which only similar chemicals are produced. For multipurpose batch plants with highly varying production processes and changing production mix, the top-down model produced inaccurate results. A bottom-up model is postulated for such plants. The results obtained are discussed that show that the electricity consumption for infrastructure equipment was significant and responsible for about 50% of total electricity consumption. The specific energy consumption for the different buildings was related to the degree of automation and the production processes. Analyses of the results of modelling are presented. More detailed analyses of the energy consumption of this apparatus group show that about 30 to 40% of steam energy is lost and thus a large potential for optimisation exists. Various potentials for making savings, ranging from elimination of reflux conditions to the development of a new heating/cooling-system for a generic batch reactor, are identified.

Characteristics of Beverage Consumption Habits among a Large Sample of French Adults: Associations with Total Water and Energy Intakes

Directory of Open Access Journals (Sweden)

Fabien Szabo de Edelenyi

2016-10-01

Full Text Available Background: Adequate hydration is a key factor for correct functioning of both cognitive and physical processes. In France, public health recommendations about adequate total water intake (TWI only state that fluid intake should be sufficient, with particular attention paid to hydration for seniors, especially during heatwave periods. The objective of this study was to calculate the total amount of water coming from food and beverages and to analyse characteristics of consumption in participants from a large French national cohort. Methods: TWI, as well as contribution of food and beverages to TWI was assessed among 94,939 adult participants in the Nutrinet-Santé cohort (78% women, mean age 42.9 (SE 0.04 using three 24-h dietary records at baseline. Statistical differences in water intakes across age groups, seasons and day of the week were assessed. Results: The mean TWI was 2.3 L (Standard Error SE 4.7 for men and 2.1 L (SE 2.4 for women. A majority of the sample did comply with the European Food Safety Authority (EFSA adequate intake recommendation, especially women. Mean total energy intake (EI was 1884 kcal/day (SE 1.5 (2250 kcal/day (SE 3.6 for men and 1783 kcal/day (SE 1.5 for women. The contribution to the total EI from beverages was 8.3%. Water was the most consumed beverage, followed by hot beverages. The variety score, defined as the number of different categories of beverages consumed during the three 24-h records out of a maximum of 8, was positively correlated with TWI (r = 0.4; and with EI (r = 0.2, suggesting that beverage variety is an indicator of higher consumption of food and drinks. We found differences in beverage consumptions and water intakes according to age and seasonality. Conclusions: The present study gives an overview of the water intake characteristics in a large population of French adults. TWI was found to be globally in line with public health recommendations.

State energy data report 1992: Consumption estimates

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

This is a report of energy consumption by state for the years 1960 to 1992. The report contains summaries of energy consumption for the US and by state, consumption by source, comparisons to other energy use reports, consumption by energy use sector, and describes the estimation methodologies used in the preparation of the report. Some years are not listed specifically although they are included in the summary of data.

Energy consumption in France's industry. Conjuncture note

International Nuclear Information System (INIS)

2015-04-01

Energy consumption in the industry represents today 1/5 of France's end-use energy consumption. Gas and electricity are the most consumed and represent 2/3 of the overall. The 5 most energy consuming industries are the following: paper and cardboard industry, food industry, rubber, plastic and other non-metallic mineral products industry, metallurgy and chemical industry. The reduction of the industry's energy consumption is explained by the decline of production, but above all by the energy efficiency improvement of the sector. Technological innovations in production means have indeed led to reduce energy consumption

Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

Science.gov (United States)

Carlson, Derrick R.

While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity

The impact of relative energy prices on industrial energy consumption in China: a consideration of inflation costs.

Science.gov (United States)

He, Lingyun; Ding, Zhihua; Yin, Fang; Wu, Meng

2016-01-01

Significant effort has been exerted on the study of economic variables such as absolute energy prices to understand energy consumption and economic growth. However, this approach ignores general inflation effects, whereby the prices of baskets of goods may rise or fall at different rates from those of energy prices. Thus, it may be the relative energy price, not the absolute energy price, that has most important effects on energy consumption. To test this hypothesis, we introduce a new explanatory variable, the domestic relative energy price, which we define as "the ratio of domestic energy prices to the general price level of an economy," and we test the explanatory power of this new variable. Thus, this paper explores the relationship between relative energy prices and energy consumption in China from the perspective of inflation costs over the period from 1988 to 2012. The direct, regulatory and time-varying effects are captured using methods such as ridge regression and the state-space model. The direct impacts of relative energy prices on total energy consumption and intensity are -0.337 and -0.250, respectively; the effects of comprehensive regulation on energy consumption through the economic structure and the energy structure are -0.144 and -0.148, respectively; and the depressing and upward effects of rising and falling energy prices on energy consumption are 0.3520 and 0.3564, respectively. When economic growth and the energy price level were stable, inflation persisted; thus, rising energy prices benefitted both the economy and the environment. Our analysis is important for policy makers to establish effective energy-pricing policies that ensure both energy conservation and the stability of the pricing system.

Energy consumption and economic growth

Energy Technology Data Exchange (ETDEWEB)

Brookes, L G

1972-10-01

A mathematical model relating Gross National Product (GNP) per capita to useful energy consumed per capita is demonstrated to predict the shift in this relationship actually experienced in the U.K. and the U.S. over a period of years. World GNP growths in the recent past are used to forecast GNP growth to the year 2030 and also (via the model) the necessary fuel consumption for such growth; likewise, potential production of fossil fuels (exclusive of tar sands and oil shale) is shown to 2030, based on two different assumptions about total world reserves. Fossil fuel ceases to meet world requirements for energy at some time between 1985 and 1995. The most likely candidate for filling the gap is nuclear power.

Fast-food and full-service restaurant consumption and daily energy and nutrient intakes in US adults.

Science.gov (United States)

An, R

2016-01-01

Calorie intake and diet quality are influenced by the source of food and the place of consumption. This study examines the impacts of fast-food and full-service restaurant consumption on daily energy and nutrient intakes in US adults. Nationally representative data of 18,098 adults 18 years of age and above from the National Health and Nutrition Examination Survey 2003-2010 waves were analyzed. Outcomes included daily intake of total calories and 24 nutrients of public health concern. The key predictors were any food/beverage consumption in a day from fast-food or full-service restaurant, differentiated by consumption at home versus away from home. First-difference estimator addressed confounding bias from time-invariant unobservables such as personal food/beverage preferences by using within-individual variations in diet and restaurant consumption status between two nonconsecutive 24-h dietary recalls. Fast-food and full-service restaurant consumption, respectively, were associated with a net increase in daily total energy intake of 190.29 and 186.74 kcal, total fat of 10.61 and 9.58 g, saturated fat of 3.49 and 2.46 g, cholesterol of 10.34 and 57.90 mg, and sodium of 297.47 and 411.92 mg. The impact of fast-food and full-service restaurant consumption on energy and nutrient intakes differed by sex, race/ethnicity, education, income and weight status. Increased total energy, total fat, saturated fat, cholesterol and sodium intake were substantially larger when full-service restaurant food was consumed away from home than at home. A holistic policy intervention is warranted to target the American's overall dining-out behavior rather than fast-food consumption alone.

Allocation of Energy Consumption among Provinces in China: A Weighted ZSG-DEA Model

Directory of Open Access Journals (Sweden)

Siqin Xiong

2017-11-01

Full Text Available To realize the sustainable development of energy, the Chinese government has formulated a series of national goals of total energy control and energy structure optimization. Under the national constraints, how to efficiently allocate the constrained total amount of energy consumption to each province is a fundamental problem to be solved. Based on a data envelopment analysis (DEA model and a zero-sum game theory (ZSG, this paper constructs a weighted zero-sum game data envelopment analysis (ZSG-DEA model to allocate the energy consumption quota. Additionally, this paper compares the results with the current administrative targets, to examine the efficiency and feasibility of each allocation mechanism. Finally, this paper employs the proposed model to determine the optimal energy structure for each province in China. The results indicate that by 2020, the national goal of energy structure adjustment will be realized, and energy structure will be diversified in most regions, whereas the coal-dominated status in primary energy consumption will not change. Additionally, the weighted ZSG-DEA model focuses on allocation efficiency while the government considers more regional economic disparity. Therefore, this study suggests a mixture of the two allocation mechanisms in accordance with specific conditions.

Evaluation and analysis of energy consumption in office buildings; Feldstudie zum Energieverbrauch von Buerogebaeuden

Energy Technology Data Exchange (ETDEWEB)

Maas, Stefan; Scholzen, Frank; Thewes, Andreas; Waldmann, Daniele [Universitaet Luxemburg, Campus Kirchberg, Fakultaet fuer Naturwissenschaften, Technologie und Kommunikation, Forschungseinheit Ingenieurswissenschaften, Luxemburg (Luxembourg); Zuerbes, Arno [Fachhochschule Bingen, Fachbereich Technik, Informatik und Wirtschaft, Bingen am Rhein (Germany)

2011-06-15

During the last years the national energy consumption of Luxembourg shifted noticeable towards the building sector. In 1990 71 % of the total domestic end energy consumption was ascribed to industrial sector and only 20 % to the building sector. The distribution changed significantly and in 2005 the energy consumption dedicated to industrial sector represented only 44 %, transport 25 % and the tertiary sector 31 % [1], which includes private and public households as well as non-residential buildings. The buildings account for 40 % of total energy consumption in the EU and there is an enormous energy saving potential. Therefore the EUdirective 2002/91/EG [2] requires from all EU Member States to save energy in this sector. Hence the energy saving of buildings present an essential part of climate protection. Furthermore the new directive 2010/31/EG [3] requires from the Member States to tighten national standards and to draw up national plans for increasing the number of nearly zero-energy buildings. But for a better understanding of energy flows in buildings and to develop energy saving concepts as well as to estimate possible energy savings of buildings a detailed analysis of energy consumption databases is an important precondition. The following field survey monitors 47 office buildings in Luxembourg. A separate gathering of electricity, heat and cooling energy consumptions allowed a detailed energetic analysis. A statistical analysis and interpretation of new buildings differentiated by energy sources as well as definition of energy relevant parameters like the window ratio, the construction method, the type of use or the kind of technical installations show the problems of typical existing office buildings. A final extrapolation to the population of all new office buildings in Luxembourg helps to estimate the energy saving potential.

A Real-Time Energy Consumption Simulation and Comparison of Buildings in Different Construction Years in the Olympic Central Area in Beijing

Directory of Open Access Journals (Sweden)

Chen Xu

2017-12-01

Full Text Available Energy consumed the in urban sector accounts for a large proportion of total world delivered energy consumption. Residential building energy consumption is an important part of urban energy consumption. However, there are few studies focused on this issue and that have simulated the energy consumption of residential buildings using questionnaire data. In this research, an eQUEST study was conducted for different residential buildings in the Olympic Central Area in Beijing. Real-time meteorological observation data and an actual energy consumption schedule generated by questionnaire data were used to improve the eQUEST model in the absence of actual energy consumption data. The simulated total energy consumption of residential buildings in the case area in 2015 is 21,262.28 tce, and the average annual energy consumption per unit area is 20.09 kgce/(m2·a. Space heating accounted for 45% of the total energy consumption as the highest proportion, and the second highest was household appliances, which accounted for 20%. The results showed that old residential buildings, multi-storey buildings and large-sized apartment buildings consume more energy. The internal units, building height, per capita construction area, the number of occupants and length of power use had significant impact on residential energy consumption. The result of this study will provide practical reference for energy saving reconstruction of residential buildings in Beijing.

Smart campus: Data on energy consumption in an ICT-driven university.

Science.gov (United States)

Popoola, Segun I; Atayero, Aderemi A; Okanlawon, Theresa T; Omopariola, Benson I; Takpor, Olusegun A

2018-02-01

In this data article, we present a comprehensive dataset on electrical energy consumption in a university that is practically driven by Information and Communication Technologies (ICTs). The total amount of electricity consumed at Covenant University, Ota, Nigeria was measured, monitored, and recorded on daily basis for a period of 12 consecutive months (January-December, 2016). Energy readings were observed from the digital energy meter (EDMI Mk10E) located at the distribution substation that supplies electricity to the university community. The complete energy data are clearly presented in tables and graphs for relevant utility and potential reuse. Also, descriptive first-order statistical analyses of the energy data are provided in this data article. For each month, the histogram distribution and time series plot of the monthly energy consumption data are analyzed to show insightful trends of energy consumption in the university. Furthermore, data on the significant differences in the means of daily energy consumption are made available as obtained from one-way Analysis of Variance (ANOVA) and multiple comparison post-hoc tests. The information provided in this data article will foster research development in the areas of energy efficiency, planning, policy formulation, and management towards the realization of smart campuses.

Informatics Solution for Energy Efficiency Improvement and Consumption Management of Householders

Directory of Open Access Journals (Sweden)

Simona-Vasilica Oprea

2018-01-01

Full Text Available Although in 2012 the European Union (EU has promoted energy efficiency in order to ensure a gradual 20% reduction of energy consumption by 2020, its targets related to energy efficiency have increased and extended to new time horizons. Therefore, in 2016, a new proposal for 2030 of energy efficiency target of 30% has been agreed. However, during the last years, even if the electricity consumption by households decreased in the EU-28, the largest expansion was recorded in Romania. Taking into account that the projected consumption peak is increasing and energy consumption management for residential activities is an important measure for energy efficiency improvement since its ratio from total consumption can be around 25–30%, in this paper, we propose an informatics solution that assists both electricity suppliers/grid operators and consumers. It includes three models for electricity consumption optimization, profiles, clustering and forecast. By this solution, the daily operation of appliances can be optimized and scheduled to minimize the consumption peak and reduce the stress on the grid. For optimization purpose, we propose three algorithms for shifting the operation of the programmable appliances from peak to off-peak hours. This approach enables the supplier to apply attractive time-of-use tariffs due to the fact that by flattening the consumption peak, it becomes more predictable, and thus improves the strategies on the electricity markets. According to the results of the optimization process, we compare the proposed algorithms emphasizing the benefits. For building consumption profiles, we develop a clustering algorithm based on self-organizing maps. By running the algorithm for three scenarios, well-delimited profiles are obtained. As for the consumption forecast, highly accurate feedforward artificial neural networks algorithm with backpropagation is implemented. Finally, we test these algorithms using several datasets showing their

Exploring the relationship between urbanization and energy consumption in China using ARDL (autoregressive distributed lag) and FDM (factor decomposition model)

International Nuclear Information System (INIS)

Liu, Yaobin

2009-01-01

The paper develops a function of energy consumption, population growth, economic growth and urbanization process, and provides fresh empirical evidences for urbanization and energy consumption for China over the period 1978-2008 through the use of ARDL testing approach and factor decomposition model. The results of the bounds test show that there is a stable long run relationship amongst total energy consumption, population, GDP (Gross domestic product) and urbanization level when total energy consumption is the dependent variable in China. The results of the causality test with ECM (error correction model) specification, the short run and long run dynamics of the interested variables are tested, indicating that there exists only a unidirectional Granger causality running from urbanization to total energy consumption both in the long run and in the short run. At present, the contribution share which urbanization drags the energy consumption is smaller than that in the past, and the intensity holds a downward trend. Therefore, together with enhancing energy efficiency, accelerating the urbanization process that can cut reliance on resource and energy dependent industries is a fundamental strategy to solve the sustainable development dilemma between energy consumption and urbanization.

Exploring the relationship between urbanization and energy consumption in China using ARDL (autoregressive distributed lag) and FDM (factor decomposition model)

Energy Technology Data Exchange (ETDEWEB)

Liu, Yaobin [Research Center of the Central China Economic Development, Nanchang University, Nanchang 330047 (China)

2009-11-15

The paper develops a function of energy consumption, population growth, economic growth and urbanization process, and provides fresh empirical evidences for urbanization and energy consumption for China over the period 1978-2008 through the use of ARDL testing approach and factor decomposition model. The results of the bounds test show that there is a stable long run relationship amongst total energy consumption, population, GDP (Gross domestic product) and urbanization level when total energy consumption is the dependent variable in China. The results of the causality test with ECM (error correction model) specification, the short run and long run dynamics of the interested variables are tested, indicating that there exists only a unidirectional Granger causality running from urbanization to total energy consumption both in the long run and in the short run. At present, the contribution share which urbanization drags the energy consumption is smaller than that in the past, and the intensity holds a downward trend. Therefore, together with enhancing energy efficiency, accelerating the urbanization process that can cut reliance on resource and energy dependent industries is a fundamental strategy to solve the sustainable development dilemma between energy consumption and urbanization. (author)

Household energy and consumption and expenditures, 1990

International Nuclear Information System (INIS)

1993-01-01

The purpose of this supplement to the Household Energy Consumption and Expenditures 1990 report is to provide information on the use of energy in residential housing units, specifically at the four Census regions and nine Census division levels. This report includes household energy consumption, expenditures, and prices for natural gas, electricity, fuel oil, liquefied petroleum gas (LPG), and kerosene as well as household wood consumption. For national-level data, see the main report, Household Energy Consumption and Expenditures 1990

Energy drink consumption and impact on caffeine risk.

Science.gov (United States)

Thomson, Barbara M; Campbell, Donald M; Cressey, Peter; Egan, Ursula; Horn, Beverley

2014-01-01

The impact of caffeine from energy drinks occurs against a background exposure from naturally occurring caffeine (coffee, tea, cocoa and foods containing these ingredients) and caffeinated beverages (kola-type soft drinks). Background caffeine exposure, excluding energy drinks, was assessed for six New Zealand population groups aged 15 years and over (n = 4503) by combining concentration data for 53 caffeine-containing foods with consumption information from the 2008/09 New Zealand Adult Nutrition Survey (ANS). Caffeine exposure for those who consumed energy drinks (n = 138) was similarly assessed, with inclusion of energy drinks. Forty-seven energy drink products were identified on the New Zealand market in 2010. Product volumes ranged from 30 to 600 ml per unit, resulting in exposures of 10-300 mg caffeine per retail unit consumed. A small percentage, 3.1%, of New Zealanders reported consuming energy drinks, with most energy drink consumers (110/138) drinking one serving per 24 h. The maximum number of energy drinks consumed per 24 h was 14 (total caffeine of 390 mg). A high degree of brand loyalty was evident. Since only a minor proportion of New Zealanders reported consuming energy drinks, a greater number of New Zealanders exceeded a potentially adverse effect level (AEL) of 3 mg kg(-1) bw day(-1) for caffeine from caffeine-containing foods than from energy drinks. Energy drink consumption is not a risk at a population level because of the low prevalence of consumption. At an individual level, however, teenagers, adults (20-64 years) and females (16-44 years) were more likely to exceed the AEL by consuming energy drinks in combination with caffeine-containing foods.

An integrated DEA PCA numerical taxonomy approach for energy efficiency assessment and consumption optimization in energy intensive manufacturing sectors

International Nuclear Information System (INIS)

Azadeh, A.; Amalnick, M.S.; Ghaderi, S.F.; Asadzadeh, S.M.

2007-01-01

This paper introduces an integrated approach based on data envelopment analysis (DEA), principal component analysis (PCA) and numerical taxonomy (NT) for total energy efficiency assessment and optimization in energy intensive manufacturing sectors. Total energy efficiency assessment and optimization of the proposed approach considers structural indicators in addition conventional consumption and manufacturing sector output indicators. The validity of the DEA model is verified and validated by PCA and NT through Spearman correlation experiment. Moreover, the proposed approach uses the measure-specific super-efficiency DEA model for sensitivity analysis to determine the critical energy carriers. Four energy intensive manufacturing sectors are discussed in this paper: iron and steel, pulp and paper, petroleum refining and cement manufacturing sectors. To show superiority and applicability, the proposed approach has been applied to refinery sub-sectors of some OECD (Organization for Economic Cooperation and Development) countries. This study has several unique features which are: (1) a total approach which considers structural indicators in addition to conventional energy efficiency indicators; (2) a verification and validation mechanism for DEA by PCA and NT and (3) utilization of DEA for total energy efficiency assessment and consumption optimization of energy intensive manufacturing sectors

The world energy demand in 2005: confirmed increase in energy consumptions, despite soaring crude oil prices

International Nuclear Information System (INIS)

Chateau, Bertrand

2006-01-01

consumption between 2004 and 2020, oil 30% and coal around 15% (due to carbon prices. Hydro and nuclear power would increase slowly. Globally, the contribution of renewable energies would remain modest. Asia would account for 60% of the world CO_2-energy emissions growth between 2005 and 2020, 21% for China only. Marginal emissions growth of EU-25 between 2005 and 2020. The USA would account for 6% of the total increase

Residential Energy Consumption Survey: Quality Profile

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

Application of advanced methods for the prognosis of production energy consumption

International Nuclear Information System (INIS)

Stetter, R; Witczak, P; Spindler, C; Hertel, J; Staiger, B

2014-01-01

This paper, based on a current research project, describes the application of advanced methods that are frequently used in fault-tolerance control and addresses the issue of the prognosis of energy efficiency. Today, the energy a product requires during its operation is the subject of many activities in research and development. However, the energy necessary for the production of goods is very often not analysed in comparable depth. In the field of electronics, studies come to the conclusion that about 80% of the total energy used by a product is from its production [1]. The energy consumption in production is determined very early in the product development process by designers and engineers, for example through selection of raw materials, explicit and implicit requirements concerning the manufacturing and assembly processes, or through decisions concerning the product architecture. Today, developers and engineers have at their disposal manifold design and simulation tools which can help to predict the energy consumption during operation relatively accurately. In contrast, tools with the objective to predict the energy consumption in production and disposal are not available. This paper aims to present an explorative study of the use of methods such as Fuzzy Logic to predict the production energy consumption early in the product development process

Energy Beverage Consumption Among Naval Aviation Candidates.

Science.gov (United States)

Sather, Thomas E; Delorey, Donald R

2016-06-01

Since the debut of energy beverages, the consumption of energy beverages has been immensely popular with young adults. Research regarding energy beverage consumption has included college students, European Union residents, and U.S. Army military personnel. However, energy beverage consumption among naval aviation candidates in the United States has yet to be examined. The purpose of this study was to assess energy beverage consumption patterns (frequency and volume) among naval aviation candidates, including attitudes and perceptions regarding the benefits and safety of energy beverage consumption. A 44-item survey was used to assess energy beverage consumption patterns of 302 students enrolled in the Aviation Preflight Indoctrination Course at Naval Air Station Pensacola, FL. Results indicated that 79% of participants (N = 239) reported consuming energy beverages within the last year. However, of those who reported consuming energy beverages within the last year, only 36% (N = 85) reported consuming energy beverages within the last 30 d. Additionally, 51% (N = 153) of participants reported no regular energy beverages consumption. The majority of participants consumed energy beverages for mental alertness (67%), mental endurance (37%), and physical endurance (12%). The most reported side effects among participants included increased mental alertness (67%), increased heart rate (53%), and restlessness (41%). Naval aviation candidates appear to use energy drinks as frequently as a college student population, but less frequently than expected for an active duty military population. The findings of this study indicate that naval aviation candidates rarely use energy beverages (less than once per month), but when consumed, they use it for fatigue management.

The implications of China’s investment-driven economy on its energy consumption and carbon emissions

International Nuclear Information System (INIS)

Fu, Feng; Ma, Linwei; Li, Zheng; Polenske, Karen R.

2014-01-01

Highlights: • The energy implications of China’s investment-driven (ID) economy are analyzed. • An expenditure-approach-based framework is applied to define the ID energy consumption. • An input–output model is built to identify the volume of China’s ID energy consumption. • Insights are gained for determining the saving potentials of China’s ID energy consumption. - Abstract: In this paper, we aim to fill the research gap by analyzing the relationship between China’s domestic investment and energy consumption, as well as related carbon emissions. First, we use an expenditure-approach-based framework to qualitatively examine the effects of China’s domestic investment on its energy consumption. Based on this framework, we define and differentiate the investment-driven energy consumption and carbon emissions from that which is driven by other economic activities. Second, we establish an allocation model to quantify China’s investment-driven energy consumption and carbon emissions. The results reveal that in 2007, China’s domestic investment contributed one third of both its energy consumption and carbon emissions. Further results show that a majority of this investment-driven energy consumption and carbon emissions, namely nine tenths of the total, is attributable to the construction and manufacturing sectors. Finally, we use the construction sector as a case to discuss how to determine the energy-saving and emission-reduction potential of improving investment-driven energy consumption practices

China Building Energy Consumption: Definitions and Measures from an Operational Perspective

Directory of Open Access Journals (Sweden)

Wei Wei

2017-04-01

Full Text Available China building energy consumption (BEC has been gradually derived and also sparked attention. However, something worth discussing is estimating the BEC based on the definition of life cycle or building operation. In addition, there exists discrepancy in the previous studies and the real status of BEC has not been known well. In order to settle the disputes over the calculation of BEC, this paper establishes an appropriate accounting method of building energy to present the BEC situation in China and lays the foundation for policymakers to develop appropriate energy saving policies. Meanwhile, this study attempts to clarify the BEC to help policymakers assess the effect of environmental policies. Using the method in this document, we find that the energy consumption of buildings just accounts for 15%–16% of the final total energy consumption in China; by contrast, the previous studies usually have double accounting through a top-down approach if central heat supply of buildings was taken into additional consideration.

Energy consumption, carbon emissions and economic growth in Saudi Arabia: An aggregate and disaggregate analysis

International Nuclear Information System (INIS)

Alkhathlan, Khalid; Javid, Muhammad

2013-01-01

The objective of this study is to examine the relationship among economic growth, carbon emissions and energy consumption at the aggregate and disaggregate levels. For the aggregate energy consumption model, we use total energy consumption per capita and CO 2 emissions per capita based on the total energy consumption. For the disaggregate analysis, we used oil, gas and electricity consumption models along with their respective CO 2 emissions. The long-term income elasticities of carbon emissions in three of the four models are positive and higher than their estimated short-term income elasticities. These results suggest that carbon emissions increase with the increase in per capita income which supports the belief that there is a monotonically increasing relationship between per capita carbon emissions and per capita income for the aggregate model and for the oil and electricity consumption models. The long- and short-term income elasticities of carbon emissions are negative for the gas consumption model. This result indicates that if the Saudi Arabian economy switched from oil to gas consumption, then an increase in per capita income would reduce carbon emissions. The results also suggest that electricity is less polluting than other sources of energy. - Highlights: • Carbon emissions increase with the increase in per capita income in Saudi Arabia. • The income elasticity of CO 2 is negative for the gas consumption model. • The income elasticity of CO 2 is positive for the oil consumption model. • The results suggest that electricity is less polluting than oil and gas

Energy sustainability: consumption, efficiency, and ...

Science.gov (United States)

One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consumption began exceeding planetary supply in 1977 and by 2030, global energy demand, population, and gross domestic product are projected to greatly increase over 1977 levels. With the aim of finding sustainable energy solutions, we present a simple yet rigorous procedure for assessing and counterbalancing the relationship between energy demand, environmental impact, population, GDP, and energy efficiency. Our analyses indicated that infeasible increases in energy efficiency (over 100 %) would be required by 2030 to return to 1977 environmental impact levels and annual reductions (2 and 3 %) in energy demand resulted in physical, yet impractical requirements; hence, a combination of policy and technology approaches is needed to tackle this critical challenge. This work emphasizes the difficulty in moving toward energy sustainability and helps to frame possible solutions useful for policy and management. Based on projected energy consumption, environmental impact, human population, gross domestic product (GDP), and energy efficiency, for this study, we explore the increase in energy-use efficiency and the decrease in energy use intensity required to achieve sustainable environmental impact le

U. K. surface passenger transport sector. Energy consumption and policy options for conservation

Energy Technology Data Exchange (ETDEWEB)

Maltby, D; Monteath, I G; Lawler, K A

1978-12-01

Forecasts of U.K. energy consumption in this sector for four future scenarios based on different economic growth rates, energy prices, and energy conservation policies, show that by the year 2000, private transport will probably account for 76-94% of total energy consumption in surface passenger transport. A 33% increase in the average miles-per-gallon fuel consumption through technological improvements in private vehicles, conversion of private vehicles to diesel oil, additional fuel taxation equivalent to 25 or 50% fuel price increase, a 10% reduction in average car engine size (encouraged by taxation), and changes in public transport technology offer energy savings of about 20, 5-10, 6.3 or 12.5, 2-4, and 2%, respectively. There is considerable uncertainty about the outcome of these options.

Hypercoagulability after energy drink consumption.

Science.gov (United States)

Pommerening, Matthew J; Cardenas, Jessica C; Radwan, Zayde A; Wade, Charles E; Holcomb, John B; Cotton, Bryan A

2015-12-01

Energy drink consumption in the United States has more than doubled over the last decade and has been implicated in cardiac arrhythmias, myocardial infarction, and even sudden cardiac death. We hypothesized that energy drink consumption may increase the risk of adverse cardiovascular events by increasing platelet aggregation, thereby resulting in a relatively hypercoagulable state and increased risk of thrombosis. Thirty-two healthy volunteers aged 18-40 y were given 16 oz of bottled water or a standardized, sugar-free energy drink on two separate occasions, 1-wk apart. Beverages were consumed after an overnight fast over a 30-min period. Coagulation parameters and platelet function were measured before and 60 min after consumption using thrombelastography and impedance aggregometry. No statistically significant differences in coagulation were detected using kaolin or rapid thrombelastography. In addition, no differences in platelet aggregation were detected using ristocetin, collagen, thrombin receptor-activating peptide, or adenosine diphosphate-induced multiple impedance aggregometry. However, compared to water controls, energy drink consumption resulted in a significant increase in platelet aggregation via arachidonic acid-induced activation (area under the aggregation curve, 72.4 U versus 66.3 U; P = 0.018). Energy drinks are associated with increased platelet activity via arachidonic acid-induced platelet aggregation within 1 h of consumption. Although larger clinical studies are needed to further address the safety and health concerns of these drinks, the increased platelet response may provide a mechanism by which energy drinks increase the risk of adverse cardiovascular events. Copyright © 2015 Elsevier Inc. All rights reserved.

Energy Threshold Hypothesis for Household Consumption

International Nuclear Information System (INIS)

Ortiz, Samira; Castro-Sitiriche, Marcel; Amador, Isamar

2017-01-01

A strong positive relationship among quality of life and electricity consumption at impoverished countries is found in many studies. However, previous work has presented that the positive relationship does not hold beyond certain electricity consumption threshold. Consequently, there is a need of exploring the possibility for communities to live with sustainable level of energy consumption without sacrificing their quality of life. The Gallup-Healthways Report measures global citizen’s wellbeing. This paper provides a new outlook using these elements to explore the relationships among actual percentage of population thriving in most countries and their energy consumption. A measurement of efficiency is computed to determine an adjusted relative social value of energy considering the variability in the happy life years as a function of electric power consumption. Adjustment is performed so single components don’t dominate in the measurement. It is interesting to note that the countries with the highest relative social value of energy are in the top 10 countries of the Gallup report.

Is more always better? The nonlinear relationship between energy consumption and wellbeing

Science.gov (United States)

Vaughan Winfrey, Elise Marie

Policymakers today face rapidly expanding world populations, increasing evidence of environmental degradation and climate change, and mounting economic crises. In this context, they are grappling with the challenge of balancing environmental concerns, economic viability, and the wellbeing of their citizens. Because energy consumption has both positive and negative wellbeing implications, it is unclear whether societal goals to raise standards of living through energy-intensive lifestyles conflict with the social, economic, environmental, and health dimensions of broader wellbeing aspirations. Though there has been a significant amount of research on the long-run environmental consequences of increasing aggregate world energy demand, there is a lack of direct evidence on the relationship between energy consumption and wellbeing. This paper attempts to improve our understanding of the net wellbeing consequences of energy consumption. Specifically, it examines whether there is a nonlinear relationship between per capita energy consumption, as measured alternatively by CO2 emissions (metric tons per capita), electricity consumption (kWh per capita), and total energy consumption (kg of oil equivalent per capita), and wellbeing, as measured by individual life satisfaction aggregated at the country level. Panel and cross-sectional regression analyses are conducted using data from the Gallup World Poll (GWP), integrated European and World Values Surveys (WVS-EVS), and the World Bank DataBank (WBDB). Despite the classic economic assumption that more is always better, this analysis indicates that increasing energy consumption is not always associated with wellbeing improvements. The empirical results provide some suggestive evidence that life satisfaction gains associated with energy consumption may eventually be counterbalanced by the related human and environmental costs. This is valuable information for policymakers trying to balance environmental, energy-security, and

Energy consumptions of households in 2012

International Nuclear Information System (INIS)

Denjean, Mathias

2015-06-01

Based on results of a survey, this publication comments data presented under the form of tables and graphs and related to the energy consumption by French households during 2012. It addresses expenses and consumptions for individual housing and for a flat in collective building, analyses the energy consumption with respect to surface in the case of individual housing, discusses the influence of dwelling age on consumption, the influence of geographical location in France, the influence o the residence status (owner or renter), and the influence of dwelling occupation (hours per day), and the distribution of the type of consumed energy (electricity, gas, oil, LPG, wood, other) and the money spent on these different energies. The type of energy is also related to the residence status, to the housing type (house or flat), to the flat surface, to the housing type and age, to the geographical location

End-use energy consumption estimates for U.S. commercial buildings, 1992

Energy Technology Data Exchange (ETDEWEB)

Belzer, D.B.; Wrench, L.E.

1997-03-01

An accurate picture of how energy is used in the nation`s stock of commercial buildings can serve a variety of program planning and policy needs of the US Department of Energy, utilities, and other groups seeking to improve the efficiency of energy use in the building sector. This report describes an estimation of energy consumption by end use based upon data from the 1992 Commercial Building Energy Consumption Survey (CBECS). The methodology used in the study combines elements of engineering simulations and statistical analysis to estimate end-use intensities for heating, cooling, ventilation, lighting, refrigeration, hot water, cooking, and miscellaneous equipment. Statistical Adjusted Engineering (SAE) models were estimated by building type. The nonlinear SAE models used variables such as building size, vintage, climate region, weekly operating hours, and employee density to adjust the engineering model predicted loads to the observed consumption (based upon utility billing information). End-use consumption by fuel was estimated for each of the 6,751 buildings in the 1992 CBECS. The report displays the summary results for 11 separate building types as well as for the total US commercial building stock. 4 figs., 15 tabs.

The relation between Chinese economic development and energy consumption in the different periods

International Nuclear Information System (INIS)

Yuan Chaoqing; Liu Sifeng; Fang Zhigeng; Xie Naiming

2010-01-01

Since the 1980s, Chinese economy grew rapidly. With the rapid economic growth, Chinese energy consumption sharply increased. The relation between Chinese energy consumption and economic growth is focused on, and many researchers have studied this issue by applying the methods such as granger causality test. However, the results just reveal the relation in a very long period. In this paper, the history of Chinese economy is divided into four periods. And the relation between Chinese energy consumption and economic growth is examined by applying grey incidence analysis, which is one of the most important methods of grey system theory which can be applied to solve the problems with small samples. The results show that the relations in different periods are not the same. The degree of grey incidences between total energy consumption and values added of secondary industry is larger, and the degree of grey incidences between GDP and consumption of coal is larger too. And the policy implications of these results are explained.

The relation between Chinese economic development and energy consumption in the different periods

Energy Technology Data Exchange (ETDEWEB)

Yuan Chaoqing, E-mail: yuanchaoqing@126.co [Economics and Management College, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Liu Sifeng; Fang Zhigeng; Xie Naiming [Economics and Management College, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China)

2010-09-15

Since the 1980s, Chinese economy grew rapidly. With the rapid economic growth, Chinese energy consumption sharply increased. The relation between Chinese energy consumption and economic growth is focused on, and many researchers have studied this issue by applying the methods such as granger causality test. However, the results just reveal the relation in a very long period. In this paper, the history of Chinese economy is divided into four periods. And the relation between Chinese energy consumption and economic growth is examined by applying grey incidence analysis, which is one of the most important methods of grey system theory which can be applied to solve the problems with small samples. The results show that the relations in different periods are not the same. The degree of grey incidences between total energy consumption and values added of secondary industry is larger, and the degree of grey incidences between GDP and consumption of coal is larger too. And the policy implications of these results are explained.

The relation between Chinese economic development and energy consumption in the different periods

Energy Technology Data Exchange (ETDEWEB)

Yuan, Chaoqing; Liu, Sifeng; Fang, Zhigeng; Xie, Naiming [Economics and Management College, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China)

2010-09-15

Since the 1980s, Chinese economy grew rapidly. With the rapid economic growth, Chinese energy consumption sharply increased. The relation between Chinese energy consumption and economic growth is focused on, and many researchers have studied this issue by applying the methods such as granger causality test. However, the results just reveal the relation in a very long period. In this paper, the history of Chinese economy is divided into four periods. And the relation between Chinese energy consumption and economic growth is examined by applying grey incidence analysis, which is one of the most important methods of grey system theory which can be applied to solve the problems with small samples. The results show that the relations in different periods are not the same. The degree of grey incidences between total energy consumption and values added of secondary industry is larger, and the degree of grey incidences between GDP and consumption of coal is larger too. And the policy implications of these results are explained. (author)

Energy catastrophes and energy consumption

International Nuclear Information System (INIS)

Davis, G.

1991-01-01

The possibility of energy catastrophes in the production of energy serves to make estimation of the true social costs of energy production difficult. As a result, there is a distinct possibility that the private marginal cost curve of energy producers lies to the left or right of the true cost curve. If so, social welfare will not be maximized, and underconsumption or overconsumption of fuels will exist. The occurrence of energy catastrophes and observance of the market reaction to these occurrences indicates that overconsumption of energy has been the case in the past. Postulations as to market reactions to further energy catastrophes lead to the presumption that energy consumption levels remain above those that are socially optimal

China's regional disparities in energy consumption: An input–output analysis

International Nuclear Information System (INIS)

Li, Zheng; Pan, Lingying; Fu, Feng; Liu, Pei; Ma, Linwei; Amorelli, Angelo

2014-01-01

While most of previous studies on China's energy conservation took the huge country as a whole, this manuscript revealed the obvious regional disparities in energy consumption of China's 30 provinces. Based on a hybrid energy input–output model, the total energy consumption of different regions was decomposed and compared using three measurements of embodied energy in inter-regional trade: 1) only considered inter-regional energy trade; 2) considered embodied energy in flow-out of final goods and services; 3) considered embodied energy in flow-in of final goods and services. Based on the second and third measurements, the 30 regions were categorized into four groups by their energy intensity and per capita GDP (gross domestic production). Common characteristics of decomposed regional energy intensity are discussed, and policy implication for regional energy conservation is provided. For developed regions with low energy intensities, such as Shanghai, energy conservation should focus on promoting low energy-consuming life style. For under-developed regions with low energy intensities, such as Guangxi, economic development is more urgent than energy conservation. For developing and energy absorbing regions, improving energy efficiency in industries is significant. For developing and energy exporting regions, transforming primary energy into high value-added products would be beneficial for economic development and energy conservation. - Highlights: • A hybrid input–output model for the decomposition of regional energy consumption. • A discussion of China's regional disparities in energy consumption by model results. • Regional energy consumption was compared by three measurements of embodied energy. • 30 regions of China were categorized into four groups by energy intensity and GDP

Energy consumption of agitators in activated sludge tanks - actual state and optimization potential.

Science.gov (United States)

Füreder, K; Svardal, K; Frey, W; Kroiss, H; Krampe, J

2018-02-01

Depending on design capacity, agitators consume about 5 to 20% of the total energy consumption of a wastewater treatment plant. Based on inhabitant-specific energy consumption (kWh PE 120 -1 a -1 ; PE 120 is population equivalent, assuming 120 g chemical oxygen demand per PE per day), power density (W m -3 ) and volume-specific energy consumption (Wh m -3 d -1 ) as evaluation indicators, this paper provides a sound contribution to understanding energy consumption and energy optimization potentials of agitators. Basically, there are two ways to optimize agitator operation: the reduction of the power density and the reduction of the daily operating time. Energy saving options range from continuous mixing with low power densities of 1 W m -3 to mixing by means of short, intense energy pulses (impulse aeration, impulse stirring). However, the following correlation applies: the shorter the duration of energy input, the higher the power density on the respective volume-specific energy consumption isoline. Under favourable conditions with respect to tank volume, tank geometry, aeration and agitator position, mixing energy can be reduced to 24 Wh m -3 d -1 and below. Additionally, it could be verified that power density of agitators stands in inverse relation to tank volume.

Energy Consumption and Greenhouse Gas Emission of Korean Offshore Fisheries

Science.gov (United States)

Lee, Jihoon; Kim, Taeho; Ellingsen, Harald; Hognes, Erik Skontorp; Hwang, Bokyu

2018-06-01

This paper presents the energy and greenhouse gas (GHG) emission assessments of Korean offshore fisheries. The consumption of energy by fisheries is a significant concern because of its attendant environmental effect, as well as the cost of the fuel consumed in fishing industry. With the global attention of reducing GHG emission and increasing energy efficiency of fuel, the seafood industry needs to further understand its energy use and reduce its GHG emission. In the present study, the amount of energy consumed and the GHG emission of Korean offshore fisheries in a period from 2009 to 2013 were examined. Offshore fisheries accounted for 24% of Korean production in 2013 and 60% of fuel consumption related GHG emission. Whereas the total GHG emission intensity of this sector improved slightly between 2009 and 2012; as such emission decreased by approximately 1.9%, which increased again in 2013. The average amount of total GHG emission in this five years period was 1.78 × 106 tons of carbon dioxide equivalent/year (t CO2 eq. y-1). Active fishing gear was found to consume 20% more fuel than passive gear. However, the production from passive gear was 28%, lower than 72% from active gear. The reason for this is that less abundant stationary resources are harvested using passive gear. Furthermore, the consumption of fuel was significantly influenced by the fishing method. Implementation and development of new fishing technologies and methods are important for improving energy efficiency and reducing the climate impact on fisheries. To realize these purposes, the fishery management system needs to be established by centralizing on energy efficiency and climate effect.

Effects of snack consumption for 8 weeks on energy intake and body weight.

Science.gov (United States)

Viskaal-van Dongen, M; Kok, F J; de Graaf, C

2010-02-01

Consumption of snacks might contribute to the obesity epidemic. It is not clear how the moment of consumption and energy density of snacks can influence the compensatory response to consumption of snacks in the long term. To investigate the effects of snack consumption for 8 weeks on changes in body weight, emphasizing on moment of consumption and energy density. In total, 16 men and 66 women (mean age 21.9 years (s.d. 0.3 year), mean body mass index 20.7 kg m(-2) (s.d. 0.2 kg m(-2))) were randomly assigned to one of four parallel groups in a 2 x 2 design: snacks consumed with or between meals and snacks having a low (12 kJ g(-1)) energy density. For 8 weeks, subjects consumed mandatory snacks that provided 25% of energy requirements on each day. Body weight, body composition, physical activity level (PAL) and energy intake were measured in week 1 and week 8. There were no differences in changes in body weight between the four groups. Moment of consumption (P=0.7), energy density (P=0.8) and interaction (P=0.09) did not influence body weight. Similarly, there were no differences in changes in body composition, PAL and energy intake between the four groups. Body weight after 8 weeks of snack consumption was not affected by moment of consumption and energy density of snacks. This finding suggests that consuming snacks that are high or low in energy density does not necessarily contribute to weight gain. Healthy, nonobese young adults may be able to maintain a normal body weight through an accurate compensation for the consumption of snacks.

Energy balance of chosen crops and their potential to saturate energy consumption in Slovakia

Directory of Open Access Journals (Sweden)

Katarína Hrčková

2016-06-01

Full Text Available The aim of the present work was to assess and compare energy inputs and outputs of various crop managements in 2011–2012. Two main crops on arable land and three permanent grasslands were investigated. Silage maize (Zea mays L. and winter wheat (Triticum aestivum L. were grown on lowland, whilst two semi-natural grasslands and grassland infested by tufted hair-grass (Deschampsia caespitose (L. P. Beauv were located in mountainous regions of Slovakia. In these crops and grasslands the dry matter yield was measured and subsequently the supplementary energy, energy gain and unifying energy value – tonne of oil equivalent (TOE – were calculated. Silage maize with 233.37 GJ*ha-1 has provided the highest energy gain. In the group of grasslands, grassland infested by tufted hair-grass has offered the highest energy gain (59.77 GJ*ha-1. And this grassland had the lowest requirement on the supplementary energy (3.66 GJ*ha-1, contrary to silage maize with highest one (12.37 GJ*ha-1. The total energy potential of the crop biomasses was confronted with energy consumption in Slovakia. Winter wheat has the biggest energy potential, but it could cover only 19.6% and 11.3% total consumption of electricity or natural gas, respectively. Large area of permanent grasslands and their spatial location make them an important energy reservoir for bioenergy production. But, it is not possible to replace all consumed fossil fuels by bioenergy from these tested renewable energy sources.

Optimal Energy Consumption Analysis of Natural Gas Pipeline

Science.gov (United States)

Liu, Enbin; Li, Changjun; Yang, Yi

2014-01-01

There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent. PMID:24955410

State Energy Data Report, 1991: Consumption estimates

International Nuclear Information System (INIS)

1993-05-01

The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to the Government, policy makers, and the public; and (2) to provide the historical series necessary for EIA's energy models

Solar Adoption and Energy Consumption in the Residential Sector

Science.gov (United States)

McAllister, Joseph Andrew

This dissertation analyzes the energy consumption behavior of residential adopters of solar photovoltaic systems (solar-PV). Based on large data sets from the San Diego region that have been assembled or otherwise acquired by the author, the dissertation quantifies changes in energy consumption after solar-PV installation and determines whether certain household characteristics are correlated with such changes. In doing so, it seeks to answer two related questions: First, "Do residential solar adopters increase or decrease their electricity consumption after they install a solar-PV system?" Assuming that certain categories of residential adopters increase and others decrease, the second question is "Which residential adopters increase and which decrease their consumption and why?" The database that was used to conduct this analysis includes information about 5,243 residential systems in San Diego Gas & Electric's (SDG&E) service territory installed between January 2007 and December 2010. San Diego is a national leader in the installation of small-scale solar-electric systems, with over 12,000 systems in the region installed as of January 2012, or around 14% of the total number installed in California. The author performed detailed characterization of a significant subset of the solar installations in the San Diego region. Assembled data included technical and economic characteristics of the systems themselves; the solar companies that sold and installed them; individual customer electric utility billing data; metered PV production data for a subgroup of these solar systems; and data about the properties where the systems are located. Primarily, the author was able to conduct an electricity consumption analysis at the individual household level for 2,410 PV systems installed in SDG&E service territory between January 2007 and December 2010. This analysis was designed to detect changes in electricity consumption from the pre-solar to the post-installation period. To

Energy consumption of the households 1960-1996

International Nuclear Information System (INIS)

Bentzen, J.; Engsted, T.

1999-01-01

During the 1960s energy consumption of Danish households increased relatively fast, but the oil price shocks of the 1970s and subsequent energy policy changes reversed this development towards stagnation in energy consumption in the recent decades. Using time series data covering the period 1960-1996 the final energy consumption of the residential sector is analysed in the framework of co-integration and error-correction modelling. The long run income and price elasticities are found to be 1.17 and -0.85, respectively, but in the short run energy prices seem to influence consumption less as only income and the weather conditions appear significantly in the short run dynamics of the estimated error-correction model. (au)

Development of mechanical ventilation system with low energy consumption for renovation of buildings

DEFF Research Database (Denmark)

Terkildsen, Søren

in reducing CO2-emmissions. Over the last decade, initiatives have been taken to reduce its energy consumption e.g. by the European Union, national governments or NGOs. The initiatives have mostly focused on improving the thermal properties of the building envelope to reduce heat losses. Building services......A general reduction in total energy consumption is needed, due to the increasing concerns about climate change caused by CO2-emmissions from fossil fuels. In 2004, the building sector accounted for 40% of the total energy consumption in the EU and the US and therefore must play a crucial role....... The goal was to develop a mechanical system with an SFP-value of 0.5 kJ/m3 and a heat recovery efficiency of 85% that can meet current indoor environment requirements without discomfort in terms of thermal, acoustic and draught issues. The concept was developed for a temperate climate, such as Denmark...

Energy consumption and economic development after the energy price increases of 1973

International Nuclear Information System (INIS)

Danielewski, J.

1993-01-01

The interdependence between energy consumption and economic development are highlighted in this research, which focuses on energy price rises between 1973 and 1989. Three groups of countries are identified, developing and developed market economies and centrally planned economies. Two areas of interdependence are examined, firstly the dynamic relationship between primary energy consumption growth and real economic growth and secondly the static relationship between primary energy consumption and national income. In the period under review, developing market economies reacted most strongly to higher energy prices, with lower energy consumption while maintaining real growth in the Gross Domestic Product. However developing countries and centrally planned economies increased their energy consumption per unit of national income although the rate of increase slowed after 1975. (UK)

Regional energy planning on the base of household consumption analysis in the county

International Nuclear Information System (INIS)

Majstrovic, M.; Goic, R.; Sutlovic, E.

1999-01-01

The regional planning concept accepted by the Croatian energy sector demands to establish regional energy centres. The first phase of the project was realized in Dalmatian county as 'Southern Croatian counties energy development strategy' which tasks were to collect data, to make the survey and database and to present the main characteristics of energy consumption in county households. The county was separated into ten zones according to geographic location, living standards and energy consumption. Answers to 79 questions divided into 8 groups (household general data, space heating, water heating and cooking, economic status, household ownership, energy demand, car information and future investments) made the database and the simple model formed 9 tables. The second phase consists of industrial, service and traffic sector analysis. Table data for the total energy consumption per zones, per inhabitant and zones, by energy mode and by energy use. This database and further information development will contribute to better energy planning

Energy drink consumption and marketing in South Africa.

Science.gov (United States)

Stacey, Nicholas; van Walbeek, Corné; Maboshe, Mashekwa; Tugendhaft, Aviva; Hofman, Karen

2017-12-01

Energy drinks are a fast-growing class of beverage containing high levels of caffeine and sugar. Advertising and marketing have been key to their growth in South Africa. This paper documents trends in energy drink consumption and energy drink advertising, and examines the relationship between exposure to energy drink advertising and consumption. Logistic regressions were estimated of categories of energy drink consumption on individual characteristics, as well as exposure to energy drink advertising. Exposure to advertising is measured by reported viewing of channels high in energy drink advertising. Energy drink consumption in South Africa is higher among younger, wealthier males. Spending on energy drink advertising is mostly focused on television. Targeted channels include youth, sports and general interest channels. Viewers of channels targeted by energy drink advertisers have higher odds of any and moderate levels of energy drinks consumption. Copyright © 2017 Elsevier Inc. All rights reserved.

Understanding change and continuity in residential energy consumption

DEFF Research Database (Denmark)

Gram-Hanssen, Kirsten

2011-01-01

of material consumer goods in practice theory. Case studies on household energy consumption are used as an empirical basis for these discussions. Looking at household energy consumption through the theoretical lens of practice theory necessitates discussion on whether energy consumption should be viewed......Practice theory has recently emerged within consumer studies as a promising approach that shifts focus from the individual consumer towards the collective aspects of consumption and from spectacular and conspicuous dimensions of consumption towards routine and mundane aspects of consumption...

Quantification of variables that affect energy consumption

International Nuclear Information System (INIS)

Warren, C.S.

1993-01-01

Facility energy consumption is the summation of a number of contributory factors, caused by equipment that uses energy in response to demands placed by the user and according to its particular design. While energy efficiency improvements usually concentrate on individual parts or systems, overall energy consumption is analyzed by examining the use of specific fuels. Because independent variables effect the consumption of these fuels, accurate comparisons of a facility's energy consumption for time-measured periods must include these effects. In many cases, it is possible to determine and quantify the effects of one or more of the independent variables through a statistically valid regression analysis of the data. The regression model can be linear, or be dependent on other functions such as powers, time lead or lag, or exponential. The most common model is linear, but other dependencies are often encountered. Regression analyses are not difficult to accomplish, and are included as one of the tools in most spreadsheet software. The analyses provide the energy manager with a means to better understand the energy consumption of his/her facility

Calculations of energy consumption in ventilation systems

Energy Technology Data Exchange (ETDEWEB)

Kreslins, Andris; Ramata, Anna [Riga Technical University (Latvia)], e-mail: kreslins@rbf.rtu.lv, email: Anna.Ramata@rtu.lv

2011-07-01

Energy cost is an important economic factor in the food industry production process. With the rising price of energy, a reduction in energy consumption would greatly impact production and the end product. The aim of this study was to develop a methodology for optimizing energy consumption. A comparison between a traditional ventilation system and a mechanical system was carried out; the necessary enthalpy for heating the air supply and thermal energy consumption were calculated and compared for both systems during the heating season, from October to April, using climatological data for Latvia. Results showed that energy savings of 46% to 87% can be achieved by applying the methodology in the design of industrial buildings; in addition, a well-designed ventilation system increases the workers' productivity. This study presented a methodology which can optimize energy consumption in the food industry sector.

Exploring energy consumption and demand in China

International Nuclear Information System (INIS)

Fan, Ying; Xia, Yan

2012-01-01

China has been experiencing industrialization and urbanization since reform and opening of its economy in 1978. Energy consumption in the country has featured issues such as a coal-dominated energy mix, low energy efficiency and high emissions. Thus, it is of great importance to explore the factors driving the increase in energy consumption in the past two decades and estimate the potential for decreasing energy demands in the future. In this paper a hybrid energy input–output model is used to decompose driving factors to identify how these factors impact changes in energy intensity. A modified RAS approach is applied to project energy requirements in a BAU scenario and an alternative scenario. The results show that energy input mix, industry structure and technology improvements have major influences on energy demand. Energy demand in China will continue to increase at a rapid rate if the economy develops as in the past decades, and is projected to reach 4.7 billion tce in 2020. However, the huge potential for a decrease cannot be neglected, since growth could be better by adjusting the energy mix and industrial structure and enhancing technology improvements. The total energy demand could be less than 4.0 billion tce in 2020. -- Highlights: ► In this paper a hybrid energy input–output model is used to decompose driving factors to China’s energy intensity change. ► A modified RAS approach is applied to project energy requirements in China. ► The results show that energy input mix, industry structure and technology improvements have major influences on energy demand. ► Energy demand in China will reach 4.7 billion ton in 2020 if the economy develops as in the past decades. ► There is a huge potential for a decrease of energy demand by adjusting the energy mix and industrial structure and enhancing technology improvements.

Analysis of electric energy consumption of automatic milking systems in different configurations and operative conditions.

Science.gov (United States)

Calcante, Aldo; Tangorra, Francesco M; Oberti, Roberto

2016-05-01

Automatic milking systems (AMS) have been a revolutionary innovation in dairy cow farming. Currently, more than 10,000 dairy cow farms worldwide use AMS to milk their cows. Electric consumption is one of the most relevant and uncontrollable operational cost of AMS, ranging between 35 and 40% of their total annual operational costs. The aim of the present study was to measure and analyze the electric energy consumption of 4 AMS with different configurations: single box, central unit featuring a central vacuum system for 1 cow unit and for 2 cow units. The electrical consumption (daily consumption, daily consumption per cow milked, consumption per milking, and consumption per 100L of milk) of each AMS (milking unit + air compressor) was measured using 2 energy analyzers. The measurement period lasted 24h with a sampling frequency of 0.2Hz. The daily total energy consumption (milking unit + air compressor) ranged between 45.4 and 81.3 kWh; the consumption per cow milked ranged between 0.59 and 0.99 kWh; the consumption per milking ranged between 0.21 and 0.33 kWh; and the consumption per 100L of milk ranged between 1.80 to 2.44 kWh according to the different configurations and operational contexts considered. Results showed that AMS electric consumption was mainly conditioned by farm management rather than machine characteristics/architectures. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

State energy data report 1996: Consumption estimates

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-01

The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.

State energy data report 1996: Consumption estimates

International Nuclear Information System (INIS)

1999-02-01

The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA's energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs

Sector review of UK higher education energy consumption

International Nuclear Information System (INIS)

Ward, Ian; Ogbonna, Anthony; Altan, Hasim

2008-01-01

The UK education and education-related services are said to be one of the fastest-growing export earners in recent years and are known to have had significant impacts at the micro- and macro-levels of the UK. This review looks at energy consumption of this fast growing sector. It concentrates on the energy consumption patterns of the funded higher education institutions in the UK. The findings indicate energy consumption in the sector has been on the increase in the 6 years up to 2006; rising by about 2.7% above the 2001 consumption levels. This increase is, however, not evenly spread across the entire sector. The high energy-consuming institutions appear to be increasing their net consumption, relative to other institutions. Gross internal area, staff and research student full-time equivalent were found to have highest correlation with energy consumption across the sector and may be used as proxy indicators for energy consumption as well as the targets of interventions

Is it so bad? Energy consumption and changes in stocks of energy-converting artefacts

Energy Technology Data Exchange (ETDEWEB)

Bladh, Mats (Department of Thematic Studies, Technology and Social Change, Linkoeping University (Sweden))

2011-07-01

The development of total energy consumption is important in a world with limited resources. It is the result of two basic tendencies working in opposite directions: growth in use (such as more cars) and improvements in energy efficiency (such as more fuel-efficient engines). Since the 1970s energy consumption has stagnated in Sweden. This means that increasing supply has been counteracted by measures improving overall energy efficiency to a larger degree than before. How can longterm development in energy consumption be analysed? This paper proposes a change-of-stock model as a tool for such analyses. In order to show the fruitfulness of this approach, historical data on cars, dwellings and lamps in Sweden are used. The basic idea is that changes in composition, size and use of stocks of these energy converters explain energy consumption. Gains in efficiency can be reached in two ways, either through changing technological path (such as electric cars instead of petrol-driven cars) or improvements within the path taken (such as fuel-efficient combustion engines). As the existence of path dependence is assumed here, it is expected that the latter will dominate. But does that mean small gains in energy saved? Results from the cases in this paper show considerable gains of efficiency in fuel consumption in private cars, and heating efficiency in multi-dwelling houses. Thus, incremental changes are important, but are partially offset by changes in characteristics of the artefacts. Radical changes, such as the factual change from air to rail transportation, and a counterfactual double switch from gasoline to electric cars and from electric heating to district heating, as well as probable gains from the phase-out of incandescent lamps, show even bigger gains. Both incremental and radical changes are the subject of counteracting tendencies, of a broader nature than that associated with rebound effects, such as more cars per inhabitant and fewer people in each dwelling. The

Biomass energy in Jordan, and its potential contribution towards the total energy mix of the Kingdom

International Nuclear Information System (INIS)

Al-Dabbas, Moh'd A. F.

1994-04-01

An evaluation of Jordan's bio-energy status was carried out. Available sources and the viability of exploitation were studied in order to identify the size of contribution that bio-energy could provide to the total energy mix of the Kingdom. The advantages of biogas technology were discussed, and a general description of Jordan's experience in this field was presented. Data on Jordan' animal, municipal, and agricultural wastes that are available as a potential source of bio-energy was tabulated. The report ascertained the economic feasibility of biogas utilization in Jordan, and concluded that the annual energy production potential from biogas, with only animal wastes being utilized, would amount to 80,000 ton oil equivalent. This amount of energy is equivalent to 2% of Jordan's total energy consumption in 1992. The utilization of biogas from municipal wastes would produce an additional 2.5% of the total energy consumption of Jordan. The annual value of utilizing animal and municipal wastes would reach 23 million Jordanian Dinars (JD). This value would increase to 61.5 million JD with the utilization of human wastes. The investment required for the utilization of bio-energy sources in Amman and its suburbs on the scale of family unit fermenters was estimated to be in the order of a million JD. The size of investment for industrial scale utilization for power generation with an electricity feed to the national grid, would range from 3 to 4 million JD. (A.M.H.). 8 refs., 4 tabs

Minimum energy consumption process synthesis for energy saving

Energy Technology Data Exchange (ETDEWEB)

Xiao-Ping, Jia [Institute for Petroleum and Chemical Industry, Qingdao University of Science and Technology, Qingdao 266042, Shandong (China); Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084 (China); Fang, Wang; Shu-Guang, Xiang; Xin-Sun, Tan; Fang-Yu, Han [Institute for Petroleum and Chemical Industry, Qingdao University of Science and Technology, Qingdao 266042, Shandong (China)

2008-05-15

The paper presents a synthesis strategy for the chemical processes with energy saving. The concept of minimum energy consumption process (MECP) is proposed. Three characteristics of MECP are introduced, including thermodynamic minimum energy demand, energy consumption efficiency and integration degree. These characteristics are evaluated according to quantitative thermodynamic analysis and qualitative knowledge rules. The procedure of synthesis strategy is proposed to support the generation of MECP alternatives, which combine flowsheet integration and heat integration. The cases studies will focus on how integration degrees of a process affect the energy-saving results. The separation sequences of the hydrodealkylation of toluene (HDA) process and ethanol distillation process as case studies are used to illustrate. (author)

State energy data report 1993: Consumption estimates

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public; and (2) to provide the historical series necessary for EIA`s energy models.

Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress

Energy Technology Data Exchange (ETDEWEB)

Belzer, D. B.; Hadley, S. W.; Chin, S-M.

2008-10-01

The Energy Policy Act of 2005 (Pub. L. No. 109-58; EPAct 2005) amended the Uniform Time Act of 1966 (Pub. L. No. 89-387) to increase the portion of the year that is subject to Daylight Saving Time. (15 U.S.C. 260a note) EPAct 2005 extended the duration of Daylight Saving Time in the spring by changing its start date from the first Sunday in April to the second Sunday in March, and in the fall by changing its end date from the last Sunday in October to the first Sunday in November. (15 U.S.C. 260a note) EPAct 2005 also called for the Department of Energy to evaluate the impact of Extended Daylight Saving Time on energy consumption in the United States and to submit a report to Congress. (15 U.S.C. 260a note) This report presents the results of impacts of Extended Daylight Saving Time on the national energy consumption in the United States. The key findings are: (1) The total electricity savings of Extended Daylight Saving Time were about 1.3 Tera Watt-hour (TWh). This corresponds to 0.5 percent per each day of Extended Daylight Saving Time, or 0.03 percent of electricity consumption over the year. In reference, the total 2007 electricity consumption in the United States was 3,900 TWh. (2) In terms of national primary energy consumption, the electricity savings translate to a reduction of 17 Trillion Btu (TBtu) over the spring and fall Extended Daylight Saving Time periods, or roughly 0.02 percent of total U.S. energy consumption during 2007 of 101,000 TBtu. (3) During Extended Daylight Saving Time, electricity savings generally occurred over a three- to five-hour period in the evening with small increases in usage during the early-morning hours. On a daily percentage basis, electricity savings were slightly greater during the March (spring) extension of Extended Daylight Saving Time than the November (fall) extension. On a regional basis, some southern portions of the United States exhibited slightly smaller impacts of Extended Daylight Saving Time on energy savings

10 CFR Appendix J to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Automatic and Semi-Automatic Clothes...

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption.... Note: Appendix J does not provide a means for determining the energy consumption of a clothes washer... divided by the total clothes washer energy consumption per cycle, with such energy consumption expressed...

Consumption Patterns of Energy Drinks in Portuguese Adolescents from A City in Northern Portugal.

Science.gov (United States)

Martins, Albino; Ferreira, Carmo; Sousa, Dinis; Costa, Sandra

2018-04-30

Energy drinks are youth-targeted beverages that contain high amounts of caffeine and other stimulants. A number of deleterious health effects associated with consumption of these drinks have already been reported. Despite the health concerns, energy drinks research has been sparse, especially at younger ages. The main purpose of this study was to determine the prevalence of energy drinks consumption and patterns of use among adolescents. Cross-sectional study of students aged between 11 - 17 years-old attending four public schools in Braga, cluster sampled. A self-administrated questionnaire was used to access sociodemographic data, self-reported academic performance as well as energy drinks consumption patterns, attitudes, awareness and associated symptoms. In a total of 1414 adolescents studied (mean age 15.1 ± 1.5 years; 53.9% were females), 56.7% reported to have used energy drinks at least once (62.5% in males; 52.1% in females). Of those, 34% described a regular consumption (at least once a month) and 14.1% a weekly consumption. The most common reasons for energy drinks consumption were the pleasant taste (49%), desire to increase global energy (35%) or sports performance (33%). On average, energy drinks users were older compared with non-users. Energy drinks consumption was associated with male gender and with self-reported worse academic performance. Approximately onethird experienced at least one symptom after consumption. In addition, 39.9% of energy drinks consumers reported mixing those with alcohol. Consumption of energy drinks has been increasing. The prevalence found for its consumption in this study is similar to that reported in the literature. Knowledge about motivation, general awareness of the risks or other variables related to consumption of these drinks might allow a better characterization of this behavior. This study showed a high prevalence of energy drinks consumption among adolescents from a city in Northern Portugal

Allocation of Energy Consumption among Provinces in China: A Weighted ZSG-DEA Model

OpenAIRE

Siqin Xiong; Yushen Tian; Junping Ji; Xiaoming Ma

2017-01-01

To realize the sustainable development of energy, the Chinese government has formulated a series of national goals of total energy control and energy structure optimization. Under the national constraints, how to efficiently allocate the constrained total amount of energy consumption to each province is a fundamental problem to be solved. Based on a data envelopment analysis (DEA) model and a zero-sum game theory (ZSG), this paper constructs a weighted zero-sum game data envelopment analysis ...

Socio-Demographic Differences in Energy Drink Consumption and Reasons for Consumption among US College Students

Science.gov (United States)

Poulos, Natalie S.; Pasch, Keryn E.

2016-01-01

Background: Energy drink consumption has become increasingly prevalent among US college students, yet little is known about current rates of consumption and reasons for consumption among current energy drink users, particularly differences related to gender and race/ethnicity. Objectives: To better understand energy drink consumption alone and…

Spatial Variation and Distribution of Urban Energy Consumptions from Cities in China

Directory of Open Access Journals (Sweden)

Yanpeng Cai

2010-12-01

Full Text Available With support of GIS tools and Theil index, the spatial variance of urban energy consumption in China was discussed in this paper through the parallel comparison and quantitative analysis of the 30 provincial capital cities of mainland China in 2005, in terms of scale, efficiency and structure. The indicators associated with urban energy consumption show large spatial variance across regions, possibly due to diversities of geographic features, economic development levels and local energy source availability in China. In absolute terms, cities with the highest total energy consumption are mostly distributed in economic-developed regions as Beijing-Tianjin-Tangshan Area, Yangtze River Delta and Pearl River Delta of China, however, the per capita urban energy use is significantly higher in the Mid-and-Western regions. With regard to the energy mix, coal still plays the dominant role and cities in Mid-and-Western regions rely more on coal. In contrast, high quality energy carrier as electricity and oils are more used in southeast coastal zone and northern developed areas. The energy intensive cities are mainly located in the northwest, while the cities with higher efficiency are in southeast areas. The large spatial variance of urban energy consumption was also verified by the Theil indices. Considering the Chinese economy-zones of East, Middle and West, the within-group inequalities are the main factor contributing to overall difference, e.g., the Theil index for per capita energy consumption of within-group is 0.18, much higher than that of between group (0.07, and the same applies to other indicators. In light of the spatial variance of urban energy consumptions in China, therefore, regionalized and type-based management of urban energy systems is badly needed to effectively address the ongoing energy strategies and targets.

Evaluation of energy consumption of treating nitrate-contaminated groundwater by bioelectrochemical systems.

Science.gov (United States)

Cecconet, Daniele; Zou, Shiqiang; Capodaglio, Andrea G; He, Zhen

2018-09-15

Nitrate contamination of groundwater is a mounting concern for drinking water production due to its healthy and ecological effects. Bioelectrochemical systems (BES) are a promising method for energy efficient nitrate removal, but its energy consumption has not been well understood. Herein, we conducted a preliminary analysis of energy consumption based on both literature information and multiple assumptions. Four scenarios were created for the purpose of analysis based on two treatment approaches, microbial fuel cells (MFCs) and controlled biocathodic denitrification (CBD), under either in situ or ex situ deployment. The results show a specific energy consumption based on the mass of NO 3 - -N removed (SEC N ) of 0.341 and 1.602 kWh kg NO 3 - -N -1 obtained from in situ and ex situ treatments with MFCs, respectively; the main contributor was the extraction of the anolyte (100%) in the former and pumping the groundwater (74.8%) for the latter. In the case of CBD treatment, the energy consumption by power supply outcompeted all the other energy items (over 85% in all cases), and a total SEC N of 19.028 and 10.003 kWh kg NO 3 - -N -1 were obtained for in situ and ex situ treatments, respectively. The increase in the water table depth (from 10 to 30 m) and the decrease of the nitrate concentration (from 25 to 15 mg NO 3 - -N) would lead to a rise in energy consumption in the ex situ treatment. Although some data might be premature due to the lack of sufficient information in available literature, the results could provide an initial picture of energy consumption by BES-based groundwater treatment and encourage further thinking and analysis of energy consumption (and production). Copyright © 2018 Elsevier B.V. All rights reserved.

Highly-resolved modeling of personal transportation energy consumption in the United States

International Nuclear Information System (INIS)

Muratori, Matteo; Moran, Michael J.; Serra, Emmanuele; Rizzoni, Giorgio

2013-01-01

This paper centers on the estimation of the total primary energy consumption for personal transportation in the United States, to include gasoline and/or electricity consumption, depending on vehicle type. The bottom-up sector-based estimation method introduced here contributes to a computational tool under development at The Ohio State University for assisting decision making in energy policy, pricing, and investment. In order to simulate highly-resolved consumption profiles three main modeling steps are needed: modeling the behavior of drivers, generating realistic driving profiles, and simulating energy consumption of different kinds of vehicles. The modeling proposed allows for evaluating the impact of plug-in electric vehicles on the electric grid – especially at the distribution level. It can serve as a tool to compare different vehicle types and assist policy-makers in estimating their impact on primary energy consumption and the role transportation can play to reduce oil dependency. - Highlights: • Modeling primary energy consumption for personal transportation in the United States. • Behavior of drivers has been simulated in order to establish when driving events occur and the length of each event. • Realistic driving profiles for each driving event are generated using a stochastic model. • The model allows for comparing the initial cost of different vehicles and their expected energy-use operating cost. • Evaluation of the impact of PEVs on the electric grid – especially at the distribution level – can be performed

Energy requirements of consumption: Urban form, climatic and socio-economic factors, rebounds and their policy implications

International Nuclear Information System (INIS)

Wiedenhofer, Dominik; Lenzen, Manfred; Steinberger, Julia K.

2013-01-01

Household consumption requires energy to be used at all stages of the economic process, thereby directly and indirectly leading to environmental impacts across the entire production chain. The levels, structure and determinants of energy requirements of household consumption therefore constitute an important avenue of research. Incorporating the full upstream requirements into the analysis helps to avoid simplistic conclusions which would actually only imply shifts between consumption categories without taking the economy wide effects into account. This paper presents the investigation of the direct and indirect primary energy requirements of Australian households, contrasting urban, suburban and rural consumption patterns as well as inter- and intra-regional levels of inequality in energy requirements. Furthermore the spatial and socio-economic drivers of energy consumption for different categories of energy requirements are identified and quantified. Conclusions regarding the relationships between energy requirements, household characteristics, urban form and urbanization processes are drawn and the respective policy implications are explored. - Highlights: • We statistically analyze the energy requirements of consumption in Australia. • Contrasting urban/suburban/rural consumption patterns and spatial inequality. • Energy requirements are influenced by urban form, income and demographics. • Urban households require less direct energy, but their total consumption is higher. • Significant rebound effects can be expected when direct energy use is decreased

Energy consumption for different greenhouse constructions

Energy Technology Data Exchange (ETDEWEB)

Djevic, M.; Dimitrijevic, A. [Department for Agricultural Engineering, University of Belgrade, Faculty of Agriculture, Nemanjina 6, 11080 Belgrade (RS)

2009-09-15

In this paper the influence of greenhouse construction on energy efficiency in winter lettuce production was estimated for four different double plastic covered greenhouses in Serbia region. Plastic coverings were introduced in this region as a mean of making the plant production more energy efficient. Additionally, as a means of lowering energy consumption, tunnel structures were proposed. In order to see whether the greenhouse structure influences energy consumption, four different double plastic covered greenhouses. Two tunnel types, 9 x 58 m and 8 x 25 m, one gutter-connected structure and multi-span plastic covered greenhouse. The gutter-connected structure was 2 x 7 m wide and 39 m long while the multi-span structure was 20 x 6.4 m wide and 42 m long. On the basis of lettuce production output and the energy input, specific energy input, energy output-input ratio and energy productivity were estimated. Results show that the lowest energy consumption was obtained for multi-span greenhouse, 9.76 MJ/m{sup 2}. The highest energy consumption was obtained in tunnel, 9 x 58 m, 13.93 MJ/m{sup 2}. The highest value for output-input ratio was calculated for multi-span greenhouse (0.29), followed by gutter-connected greenhouse (0.21), tunnel 9 x 58 m (0.17) and tunnel, 8 x 25 m (0.15). Results also show that energy productivity can be higher if multi-span greenhouse structures are used. (author)

Three essays in energy consumption: Time series analyses

Science.gov (United States)

Ahn, Hee Bai

1997-10-01

Firstly, this dissertation investigates that which demand specification is an appropriate model for long-run energy demand between the conventional demand specification and the limited demand specification. In order to determine the components of a stable long-run demand for different sectors of the energy industry, I perform cointegration tests by using the Johansen test procedure. First, I test the conventional demand specification including prices and income as components. Second, I test a limited demand specification only income as a component. The reason for performing these tests is that we can determine that which demand specification is a good long-run predictor of energy consumption between the two demand specifications by using the cointegration tests. Secondly, for the purpose of planning and forecasting energy demand in case of cointegrated system, long-run elasticities are of particular interest. To retrieve the optimal level of energy demand in case of price shock, we need long-run elasticities rather than short-run elasticities. The energy demand study provides valuable information to the energy policy makers who are concerned about the long-run impact of taxes and tariffs. A long-run price elasticity is a primary barometer of the substitution effect between energy and non-energy inputs and long-run income elasticity is an important factor since we can measure the energy demand growing slowly or fast than in the past depending on the magnitude of long-run elasticity. The one other problem in estimating the total energy demand is that there exists an aggregation bias stemming from the process of summation in four different energy types for the total aggregation prices and total aggregation energy consumption. In order to measure the aggregation bias between the Btu aggregation method and the Divisia Index method, i.e., which methodology has less aggregation bias in the long-run, I compare the two estimation results with calculated results estimated on

Research on the decomposition model for China’s National Renewable Energy total target

International Nuclear Information System (INIS)

Liu, Zhen; Shi, Yuren; Yan, Jianming; Ou, Xunmin; Lieu, Jenny

2012-01-01

It is crucial that China’s renewable energy national target in 2020 is effectively decomposed into respective period targets at the provincial level. In order to resolve problems arising from combining the national and local renewable energy development plan, a total target and period target decomposition model of renewable energy is proposed which considers the resource distribution and energy consumption of different provinces as well as the development characteristics of various renewable energy industries. In the model, the total proposed target is comprised of three shares: basic share, fixed share and floating share target. The target distributed for each province is then determined by the preference relation. That is, when total renewable energy target is distributed, the central government is more concerned about resources potential or energy consumption. Additionally, the growth models for various renewable energy industries are presented, and the period targets of renewable energy in various provinces are proposed in line with regional economic development targets. In order to verify whether the energy target can be achieved, only wind power, solar power, and hydropower are considered in this study. To convenient to assess the performance of local government, the two year period is chosen as an evaluation cycle in the paper. The renewable energy targets per two-year period for each province are calculated based on the overall national renewable energy target, energy requirements and resources distribution. Setting provincial period targets will help policy makers to better implement and supervise the overall renewable energy plan. - Highlights: It is very importance that the national target of renewable energy in 2020 can be effectively decomposed into the stages target of various province. In order to resolve the relation the plan between the national and local renewable energy development planning, a total target and phase target decomposition model

Projection of Denmark's energy consumption and emission of greenhouse gases 2012; Danmarks energifremskrivning 2012

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-09-15

The Danish energy Agency's baseline projection of Denmark's energy consumption and greenhouse gas emissions is not a forecast, but describes the development which may occur in the coming years, based on a number of assumptions about technological development, prices, economic development, etc., hypothetically assuming that no new initiatives or measures beyond those already taken are implemented. The consumption of coal and natural gas are expected to fall by 50 % and 27 %, respectively, the next 8 years, and overall Denmark's fossil fuel consumption is reduced by approx. 120 PJ by 2020. Instead, renewable energy consumption will increase by more than 40 % from 2011 to 2020. The largest contribution to new renewable energy comes from the future offshore wind farms at Anholt, Krieger's Flak and Horns Rev, and from the increased use of biomass. With this conversion, the share of renewable energy in electricity supply is expected to increase from approx. 40 % in 2011 to around 69 % in 2020 and to 75 % in 2025. Final energy consumption drops from 640 PJ in 2011 to 632 PJ in 2020 as a consequence of a decline in industrial and household energy consumption, while the transport sector's energy consumption is expected to increase. With the projection's assumptions, a renewable energy share in the transport sector of 11 % may be achieved. Denmark's total greenhouse gas emissions are expected to decrease to 45.1 million tons of CO{sub 2} equivalent in 2020. This corresponds directly to the total emissions being reduced by 35 % compared to emissions in the 1990 base year. The figure is, however, highly uncertain. (LN)

State of Energy Consumption and CO2 Emission in Bangladesh

International Nuclear Information System (INIS)

Azad, Abul K.; Nashreen, S.W.; Sultana, J.

2006-01-01

Carbon dioxide (CO 2 ) is one of the most important gases in the atmosphere, and is necessary for sustaining life on Earth. It is also considered to be a major greenhouse gas contributing to global warming and climate change. In this article, energy consumption in Bangladesh is analyzed and estimates are made of CO 2 emission from combustion of fossil fuel (coal, gas, petroleum products) for the period 1977 to 1995. International Panel for Climate Change guidelines for national greenhouse gas inventories were used in estimating CO 2 emission. An analysis of energy data shows that the consumption of fossil fuels in Bangladesh is growing by more than 5% per year. The proportion of natural gas in total energy consumption is increasing, while that of petroleum products and coal is decreasing. The estimated total CO 2 release from all primary fossil fuels used in Bangladesh amounted to 5,072 Gg in 1977, and 14,423 Gg in 1995. The total amounts of CO 2 released from petroleum products, natural gas, and coal in the period 1977-1995 were 83,026 Gg (50% of CO 2 emission), 72,541 Gg (44% of CO 2 emission), and 9,545 Gg (6% CO 2 emission), respectively. A trend in CO 2 emission with projections to 2070 is generated. In 2070, total estimated CO 2 emission will be 293,260 Gg with a current growth rate of 6.34%/y. CO 2 emission from fossil fuels is increasing. Petroleum products contribute the majority of CO 2 emission load, and although the use of natural gas is increasing rapidly, its contribution to CO 2 emission is less than that of petroleum products. The use of coal as well as CO 2 emission from coal is expected to gradually decrease

Environmental degradation, energy consumption, population growth ...

African Journals Online (AJOL)

Based on the result, there is no evidence of unidirectional causality running from CO2 emissions and energy consumption to economic growth and strong unidirectional causality running from CO2 emissions, energy consumption and economic growth to population growth was found. The long run and short run estimates ...

Global risks from energy consumption

International Nuclear Information System (INIS)

von Hippel, F.

1983-01-01

A discussion of some of the global risks associated with current and frequently proposed future levels of consumption of energy from oil, coal, fission, fusion, and renewable sources points out the the dangers are serious and relatively near term. These include world war over Persian Gulf oil, climate change due to the buildup of atmospheric carbon dioxide, the accelerated proliferation of nuclear weapons, and competition between food and energy for land and water. The author urges placing a greater emphasis on how we use energy and how to reduce energy waste. At the levels of consumption which economically justified levels of energy efficiency could bring about, enough flexibility could develop in our choice of a future energy-supply mix to dramatically reduce the associated global risks. 47 references, 3 figures

Energy Consumption Analysis for Concrete Residences—A Baseline Study in Taiwan

Directory of Open Access Journals (Sweden)

Kuo-Liang Lin

2017-02-01

Full Text Available Estimating building energy consumption is difficult because it deals with complex interactions among uncertain weather conditions, occupant behaviors, and building characteristics. To facilitate estimation, this study employs a benchmarking methodology to obtain energy baseline for sample buildings. Utilizing a scientific simulation tool, this study attempts to develop energy consumption baselines of two typical concrete residences in Taiwan, and subsequently allows a simplified energy consumption prediction process at an early design stage of building development. Using weather data of three metropolitan cities as testbeds, annual energy consumption of two types of modern residences are determined through a series of simulation sessions with different building settings. The impacts of key building characteristics, including building insulation, air tightness, orientation, location, and residence type, are carefully investigated. Sample utility bills are then collected to validate the simulated results, resulting in three adjustment parameters for normalization, including ‘number of residents’, ‘total floor area’, and ‘air conditioning comfort level’, for justification of occupant behaviors in different living conditions. Study results not only provide valuable benchmarking data serving as references for performance evaluation of different energy-saving strategies, but also show how effective extended building insulation, enhanced air tightness, and prudent selection of residence location and orientation can be for successful implementation of building sustainability in tropical and subtropical regions.

Quantification of Uncertainty in Predicting Building Energy Consumption

DEFF Research Database (Denmark)

Brohus, Henrik; Frier, Christian; Heiselberg, Per

2012-01-01

Traditional building energy consumption calculation methods are characterised by rough approaches providing approximate figures with high and unknown levels of uncertainty. Lack of reliable energy resources and increasing concerns about climate change call for improved predictive tools. A new...... approach for the prediction of building energy consumption is presented. The approach quantifies the uncertainty of building energy consumption by means of stochastic differential equations. The approach is applied to a general heat balance for an arbitrary number of loads and zones in a building...... for the dynamic thermal behaviour of buildings. However, for air flow and energy consumption it is found to be much more significant due to less “damping”. Probabilistic methods establish a new approach to the prediction of building energy consumption, enabling designers to include stochastic parameters like...

Renewable energy consumption and income in emerging economies

International Nuclear Information System (INIS)

Sadorsky, Perry

2009-01-01

Increased economic growth and demand for energy in emerging economies is creating an opportunity for these countries to increase their usage of renewable energy. This paper presents and estimates two empirical models of renewable energy consumption and income for a panel of emerging economies. Panel cointegration estimates show that increases in real per capita income have a positive and statistically significant impact on per capita renewable energy consumption. In the long term, a 1% increase in real income per capita increases the consumption of renewable energy per capita in emerging economies by approximately 3.5%. Long-term renewable energy per capita consumption price elasticity estimates are approximately equal to -0.70.

Status and future perspectives of energy consumption and its ecological impacts in the Qinghai-Tibet region

Energy Technology Data Exchange (ETDEWEB)

Ping, Xiaoge [Key Laboratory of Animal Ecology and Conservation Biology, Institute of Zoology, Chinese Academy of Sciences, No. 1 Beichen West Road, Chaoyang District, Beijing 100101 (China); Graduate University of the Chinese Academy of Sciences, Beijing 100049 (China); Jiang, Zhigang; Li, Chunwang [Key Laboratory of Animal Ecology and Conservation Biology, Institute of Zoology, Chinese Academy of Sciences, No. 1 Beichen West Road, Chaoyang District, Beijing 100101 (China)

2011-01-15

Qinghai-Tibet region is a unique geographic zone due to its average altitude of over 4000 m, sparse human population and prevalent pastoral system. However, little is known about the energy consumption in the region. We reviewed current situation of energy consumption and its ecological impacts, outlined future energy prospects in the region. Per capita household energy consumption was about two and three times of the national average in Qinghai and Tibet. Per urban household consumed more energy than rural household in the region. Moreover, the urban households and rural households used different energy resources, natural gas and electricity accounted for 57.57% and 42.29%, respectively in household energy consumption in urban areas while biomass accounted for 79.13% and 94.19% in household energy consumption in rural areas in Qinghai and Tibet in 2007. This region was abundant in renewable energy resources and was among the richest in hydro-power and solar energy resources in China. Hydro-power accounted for 67.88% and 92.04% in total electricity in Qinghai and Tibet in 2007. Population density was rather low in this region (4.35 versus 137.63 persons per 100 hm{sup 2} in Qinghai-Tibet region and China in 2007), thus small photovoltaic power stations and hydro-power plants were more cost-effective than the electricity grid. The overuse of biotic energy resources in rural areas caused decline in soil fertility and desertification. Whereas the low utilization of fossil energy in this region released less waste gas which was beneficial to the local, national and global carbon budgets. Accelerating economic growth and booming tourism have increased energy demand and posed a challenge to the unique ecosystem in the Qinghai-Tibet region. It was estimated that energy consumption of tourism accounted for 6.06% and 14.18% of the total energy consumption in Qinghai and Tibet in 2007. Thus, exploitation of renewable energy resources like solar energy, wind energy and

Status and future perspectives of energy consumption and its ecological impacts in the Qinghai-Tibet region

International Nuclear Information System (INIS)

Ping, Xiaoge; Jiang, Zhigang; Li, Chunwang

2011-01-01

Qinghai-Tibet region is a unique geographic zone due to its average altitude of over 4000 m, sparse human population and prevalent pastoral system. However, little is known about the energy consumption in the region. We reviewed current situation of energy consumption and its ecological impacts, outlined future energy prospects in the region. Per capita household energy consumption was about two and three times of the national average in Qinghai and Tibet. Per urban household consumed more energy than rural household in the region. Moreover, the urban households and rural households used different energy resources, natural gas and electricity accounted for 57.57% and 42.29%, respectively in household energy consumption in urban areas while biomass accounted for 79.13% and 94.19% in household energy consumption in rural areas in Qinghai and Tibet in 2007. This region was abundant in renewable energy resources and was among the richest in hydro-power and solar energy resources in China. Hydro-power accounted for 67.88% and 92.04% in total electricity in Qinghai and Tibet in 2007. Population density was rather low in this region (4.35 versus 137.63 persons per 100 hm 2 in Qinghai-Tibet region and China in 2007), thus small photovoltaic power stations and hydro-power plants were more cost-effective than the electricity grid. The overuse of biotic energy resources in rural areas caused decline in soil fertility and desertification. Whereas the low utilization of fossil energy in this region released less waste gas which was beneficial to the local, national and global carbon budgets. Accelerating economic growth and booming tourism have increased energy demand and posed a challenge to the unique ecosystem in the Qinghai-Tibet region. It was estimated that energy consumption of tourism accounted for 6.06% and 14.18% of the total energy consumption in Qinghai and Tibet in 2007. Thus, exploitation of renewable energy resources like solar energy, wind energy and biomass

Coupling model of energy consumption with changes in environmental utility

International Nuclear Information System (INIS)

He Hongming; Jim, C.Y.

2012-01-01

This study explores the relationships between metropolis energy consumption and environmental utility changes by a proposed Environmental Utility of Energy Consumption (EUEC) model. Based on the dynamic equilibrium of input–output economics theory, it considers three simulation scenarios: fixed-technology, technological-innovation, and green-building effect. It is applied to analyse Hong Kong in 1980–2007. Continual increase in energy consumption with rapid economic growth degraded environmental utility. First, energy consumption at fixed-technology was determined by economic outcome. In 1990, it reached a critical balanced state when energy consumption was 22×10 9 kWh. Before 1990 (x 1 9 kWh), rise in energy consumption improved both economic development and environmental utility. After 1990 (x 1 >22×10 9 kWh), expansion of energy consumption facilitated socio-economic development but suppressed environmental benefits. Second, technological-innovation strongly influenced energy demand and improved environmental benefits. The balanced state remained in 1999 when energy consumption reached 32.33×10 9 kWh. Technological-innovation dampened energy consumption by 12.99%, exceeding the fixed-technology condition. Finally, green buildings reduced energy consumption by an average of 17.5% in 1990–2007. They contributed significantly to energy saving, and buffered temperature fluctuations between external and internal environment. The case investigations verified the efficiency of the EUEC model, which can effectively evaluate the interplay of energy consumption and environmental quality. - Highlights: ► We explore relationships between metropolis energy consumption and environmental utility. ► An Environmental Utility of Energy Consumption (EUEC) model is proposed. ► Technological innovation mitigates energy consumption impacts on environmental quality. ► Technological innovation decreases demand of energy consumption more than fixed technology scenario

PARADOX OF ALTERNATIVE ENERGY CONSUMPTION: LEAN OR PROFLIGACY?

Directory of Open Access Journals (Sweden)

Eliza Safina

2017-12-01

Full Text Available Consumption of alternative energy resources is conventionally considered as an implement of lean management, main target of which is use of renewable (in terms of exhaustibility energy resources. However, when it comes to actual consumption of alternative energy resources, the contradiction is arisen between , the caused need of economy of non-renewable energy resources and rational environmental management and "providence" which is caused by cost reduction of energy consumption. What is the factual providence, how substantial is the dilemma between environmental friendliness and cost effectiveness in matters of energy savings, what is the significance of alternative energy consumption in countries with different economic types, what should balanced solution in energy mentioned issues are contemplated in current article.

Analysis on energy consumption of drying process for dried Chinese noodles

International Nuclear Information System (INIS)

Wang, Zhenhua; Zhang, Yingquan; Zhang, Bo; Yang, Fuguang; Yu, Xiaolei; Zhao, Bo; Wei, Yimin

2017-01-01

Highlights: • Energy analysis of a tunnel dryer for dried Chinese noodles is completed. • Energy saving performance of dryers with different inlet air was compared. • MND was developed and evaluated, and the efficiency and throughput was improved. - Abstract: Drying is an important operation during the production of dried Chinese noodles, and the energy consumption from drying accounts for approximately 60% of the total energy consumption during the manufacturing process. To investigate the energy consumption and throughput of dryers for dried Chinese noodles, experiments were conducted using a new 130-m long tunnel dryer with two lines of noodles (ND) and an old 60-m long tunnel dryer with five lines of noodles (OD). The energy saving effects of a modified new 130-m long tunnel dryer (MND), which was only modified through the inclusion of automatic control for temperature and humidity without any modifications to the oil heater or ND dryer structure, were also compared. The energy saving effect was determined from the enthalpy difference between the inlet and outlet humid air of the ND and MND. Finally, the MND was found to be better than ND in terms of energy efficiency and throughput, and trends for the future of noodle drying were discussed.

Energy Consumption of Fast Ferries in Danish Domestic Transport

DEFF Research Database (Denmark)

Petersen, Morten Steen; Jørgensen, Kaj

1997-01-01

Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark.......Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark....

Modeling and optimization of HVAC energy consumption

Energy Technology Data Exchange (ETDEWEB)

Kusiak, Andrew; Li, Mingyang; Tang, Fan [Department of Mechanical and Industrial Engineering, University of Iowa, Iowa City, IA 52242 - 1527 (United States)

2010-10-15

A data-driven approach for minimization of the energy to air condition a typical office-type facility is presented. Eight data-mining algorithms are applied to model the nonlinear relationship among energy consumption, control settings (supply air temperature and supply air static pressure), and a set of uncontrollable parameters. The multiple-linear perceptron (MLP) ensemble outperforms other models tested in this research, and therefore it is selected to model a chiller, a pump, a fan, and a reheat device. These four models are integrated into an energy optimization model with two decision variables, the setpoint of the supply air temperature and the static pressure in the air handling unit. The model is solved with a particle swarm optimization algorithm. The optimization results have demonstrated the total energy consumed by the heating, ventilation, and air-conditioning system is reduced by over 7%. (author)

Power allocation strategies to minimize energy consumption in wireless body area networks.

Science.gov (United States)

Kailas, Aravind

2011-01-01

The wide scale deployment of wireless body area networks (WBANs) hinges on designing energy efficient communication protocols to support the reliable communication as well as to prolong the network lifetime. Cooperative communications, a relatively new idea in wireless communications, offers the benefits of multi-antenna systems, thereby improving the link reliability and boosting energy efficiency. In this short paper, the advantages of resorting to cooperative communications for WBANs in terms of minimized energy consumption are investigated. Adopting an energy model that encompasses energy consumptions in the transmitter and receiver circuits, and transmitting energy per bit, it is seen that cooperative transmission can improve energy efficiency of the wireless network. In particular, the problem of optimal power allocation is studied with the constraint of targeted outage probability. Two strategies of power allocation are considered: power allocation with and without posture state information. Using analysis and simulation-based results, two key points are demonstrated: (i) allocating power to the on-body sensors making use of the posture information can reduce the total energy consumption of the WBAN; and (ii) when the channel condition is good, it is better to recruit less relays for cooperation to enhance energy efficiency.

Uncertainty of Energy Consumption Assessment of Domestic Buildings

DEFF Research Database (Denmark)

Brohus, Henrik; Heiselberg, Per; Simonsen, A.

2009-01-01

In order to assess the influence of energy reduction initiatives, to determine the expected annual cost, to calculate life cycle cost, emission impact, etc. it is crucial to be able to assess the energy consumption reasonably accurate. The present work undertakes a theoretical and empirical study...... of the uncertainty of energy consumption assessment of domestic buildings. The calculated energy consumption of a number of almost identical domestic buildings in Denmark is compared with the measured energy consumption. Furthermore, the uncertainty is determined by means of stochastic modelling based on input...... to correspond reasonably well; however, it is also found that significant differences may occur between calculated and measured energy consumption due to the spread and due to the fact that the result can only be determined with a certain probability. It is found that occupants' behaviour is the major...

Energy-efficient approach to minimizing the energy consumption in an extended job-shop scheduling problem

Science.gov (United States)

Tang, Dunbing; Dai, Min

2015-09-01

The traditional production planning and scheduling problems consider performance indicators like time, cost and quality as optimization objectives in manufacturing processes. However, environmentally-friendly factors like energy consumption of production have not been completely taken into consideration. Against this background, this paper addresses an approach to modify a given schedule generated by a production planning and scheduling system in a job shop floor, where machine tools can work at different cutting speeds. It can adjust the cutting speeds of the operations while keeping the original assignment and processing sequence of operations of each job fixed in order to obtain energy savings. First, the proposed approach, based on a mixed integer programming mathematical model, changes the total idle time of the given schedule to minimize energy consumption in the job shop floor while accepting the optimal solution of the scheduling objective, makespan. Then, a genetic-simulated annealing algorithm is used to explore the optimal solution due to the fact that the problem is strongly NP-hard. Finally, the effectiveness of the approach is performed smalland large-size instances, respectively. The experimental results show that the approach can save 5%-10% of the average energy consumption while accepting the optimal solution of the makespan in small-size instances. In addition, the average maximum energy saving ratio can reach to 13%. And it can save approximately 1%-4% of the average energy consumption and approximately 2.4% of the average maximum energy while accepting the near-optimal solution of the makespan in large-size instances. The proposed research provides an interesting point to explore an energy-aware schedule optimization for a traditional production planning and scheduling problem.

The growth of energy consumption and prices in the USA, West Germany, and the UK, 1950 to 1980

Science.gov (United States)

Doblin, C. P.

1982-05-01

The relationship between energy price and consumption was studied, especially reactions to oil price rises in the 1970's. Industrial, domestic, and road transportation energy consumption were examined. Until 1973, consumption rose steadily, while the inflation-adjusted price dropped. Immediate reaction to the two large price rises was a drop in consumption, but overall consumption continued to grow when the growth in total energy consumption was reversed. This change is due to adverse business conditions, displacement of coal by oil, oil by gas, and mineral fuels by electricity in given sectors, switches to less energy intensive activities, a change in the mix of gross national products, and weather conditions, as well as by price rises. Energy conservation measures had little impact.

Nuclear energy consumption and economic growth in nine developed countries

International Nuclear Information System (INIS)

Wolde-Rufael, Yemane; Menyah, Kojo

2010-01-01

This article attempts to test the causal relationship between nuclear energy consumption and real GDP for nine developed countries for the period 1971-2005 by including capital and labour as additional variables. Using a modified version of the Granger causality test developed by Toda and Yamamoto (1995), we found a unidirectional causality running from nuclear energy consumption to economic growth in Japan, Netherlands and Switzerland; the opposite uni-directional causality running from economic growth to nuclear energy consumption in Canada and Sweden; and a bi-directional causality running between economic growth and nuclear energy consumption in France, Spain, the United Kingdom and the United States. In Spain, the United Kingdom and the USA, increases in nuclear energy consumption caused increases in economic growth implying that conservation measures taken that reduce nuclear energy consumption may negatively affect economic growth. In France, Japan, Netherlands and Switzerland increases in nuclear energy consumption caused decreases in economic growth, suggesting that energy conservation measure taken that reduce nuclear energy consumption may help to mitigate the adverse effects of nuclear energy consumption on economic growth. In Canada and Sweden energy conservation measures affecting nuclear energy consumption may not harm economic growth.

Manufacturing consumption of energy 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

Output, renewable energy consumption and trade in Africa

International Nuclear Information System (INIS)

Ben Aïssa, Mohamed Safouane; Ben Jebli, Mehdi; Ben Youssef, Slim

2014-01-01

We use panel cointegration techniques to examine the relationship between renewable energy consumption, trade and output in a sample of 11 African countries covering the period 1980–2008. The results from panel error correction model reveal that there is evidence of a bidirectional causality between output and exports and between output and imports in both the short and long-run. However, in the short-run, there is no evidence of causality between output and renewable energy consumption and between trade (exports or imports) and renewable energy consumption. Also, in the long-run, there is no causality running from output or trade to renewable energy. In the long-run, our estimations show that renewable energy consumption and trade have a statistically significant and positive impact on output. Our energy policy recommendations are that national authorities should design appropriate fiscal incentives to encourage the use of renewable energies, create more regional economic integration for renewable energy technologies, and encourage trade openness because of its positive impact on technology transfer and on output. - Highlights: • We examine the relationship between renewable energy consumption, trade and output in African countries. • There is a bidirectional causality between output and trade in both the short and long-run. • In the short-run, there is no causality between renewable energy consumption and trade or output. • In the long-run, renewable energy consumption and trade have a statistically significant positive impact on output. • African authorities should encourage trade openness because of its positive impact on technology transfer and on output

Lifestyle and global energy consumption. Analyss and strategy approaches on a sustainable energy structure; Lebensstile und globaler Energieverbrauch. Analyse und Strategieansaetze zu einer nachhaltigen Energiestruktur

Energy Technology Data Exchange (ETDEWEB)

Gerstengarbe, F.W. (ed.); Reusswig, F.; Gerlinger, K.; Edenhofer, O.

2004-07-01

Lifestyle and consumption have emerged as research issues in energy and climate change related research in recent years for obvious reasons: with the emergence and the global spread of the modern 'consumer society' lifestyle induced consumption decisions by private households more and more influence total energy consumption and related carbon dioxide emissions. The paper discusses the use of the lifestyle concept derived from sociology and market research for household energy consumption and the potential for more sustainable changes. A main section is dedicated to a new way of decomposing country statistics on energy consumption, economic growth, CO{sub 2} emissions, and energy mix. We detect five distinct patterns of national energy systems via a cluster analysis of country data and their change over time. These clusters represent distinct trajectories of the recent energy economic history of the country groups and define some path dependencies for energy policy options in the nearer future which are discussed briefly. The environmental kuznets curve (EKC) debate is discussed critically in the light of the more flexible and regionally adapted way of conceiving the worlds' energy system. The paper offers a quantitative the estimation of private households' contribution to total energy related CO{sub 2} emissions, thus contributing to the assessment of lifestyle-related emissions. The final section discusses practical consequences for energy policy and lifestyle related environmental communication. (orig.)

Energy Consumption Management of Virtual Cloud Computing Platform

Science.gov (United States)

Li, Lin

2017-11-01

For energy consumption management research on virtual cloud computing platforms, energy consumption management of virtual computers and cloud computing platform should be understood deeper. Only in this way can problems faced by energy consumption management be solved. In solving problems, the key to solutions points to data centers with high energy consumption, so people are in great need to use a new scientific technique. Virtualization technology and cloud computing have become powerful tools in people’s real life, work and production because they have strong strength and many advantages. Virtualization technology and cloud computing now is in a rapid developing trend. It has very high resource utilization rate. In this way, the presence of virtualization and cloud computing technologies is very necessary in the constantly developing information age. This paper has summarized, explained and further analyzed energy consumption management questions of the virtual cloud computing platform. It eventually gives people a clearer understanding of energy consumption management of virtual cloud computing platform and brings more help to various aspects of people’s live, work and son on.

Intelligent Cooperative MAC Protocol for Balancing Energy Consumption

Science.gov (United States)

Wu, S.; Liu, K.; Huang, B.; Liu, F.

To extend the lifetime of wireless sensor networks, we proposed an intelligent balanced energy consumption cooperative MAC protocol (IBEC-CMAC) based on the multi-node cooperative transmission model. The protocol has priority to access high-quality channels for reducing energy consumption of each transmission. It can also balance the energy consumption among cooperative nodes by using high residual energy nodes instead of excessively consuming some node's energy. Simulation results show that IBEC-CMAC can obtain longer network lifetime and higher energy utilization than direct transmission.

Analysis of Factors Contributing to Changes in Energy Consumption in Tangshan City between 2007 and 2012

Directory of Open Access Journals (Sweden)

Jialing Zou

2017-03-01

Full Text Available The aim of this paper is to identify the correlations between energy consumption and the factors that control usage in the city of Tangshan. To do this, we first analyze the current status of Tangshan’s economic development and energy consumption, and then applied the logarithmic mean Divisia index to identify the factors affecting the changes in energy consumption of all sectors. The findings are summarized as follows: (1 secondary industry accounts for an extremely high percentage of industry in Tangshan city, much higher than the national average; from 2007 to 2012, the proportion of secondary industry increased in Tangshan city; (2 Tangshan’s energy consumption in 2013 was nearly twice that in 2005. Coal and coke coal consumption was responsible for 96.2% of total energy consumption in 2005 and 95.1% in 2013; (3 Tangshan’s energy intensity decreased from 3.00 tce/thousand Yuan in 2005 to 1.85 tce/thousand Yuan in 2013. However, the energy intensity of Tangshan was far more than the average for China, and the decline in Tangshan’s energy intensity was much slower than the average for China; (4 The technical effect plays a dominant role in decreasing energy consumption in most sectors, and the scale effect is the most important contributor to increasing energy consumption in all sectors. Input structural and final use structural effects play different roles in energy consumption in different sectors.

Fast-food and full-service restaurant consumption among children and adolescents: effect on energy, beverage, and nutrient intake.

Science.gov (United States)

Powell, Lisa M; Nguyen, Binh T

2013-01-01

To examine the effect of fast-food and full-service restaurant consumption on total energy intake, dietary indicators, and beverage consumption. Individual-level fixed-effects estimation based on 2 nonconsecutive 24-hour dietary recalls. Nationally representative data from the 2003-2004, 2005-2006, and 2007-2008 National Health and Nutrition Examination Survey. Children aged 2 to 11 years (n = 4717) and adolescents aged 12 to 19 years (n = 4699). Daily total energy intake in kilocalories; intake of grams of sugar, total fat, saturated fat, and protein and milligrams of sodium; and total grams of sugar-sweetened beverages, regular soda, and milk consumed. Fast-food and full-service restaurant consumption, respectively, was associated with a net increase in daily total energy intake of 126.29 kcal and 160.49 kcal for children and 309.53 kcal and 267.30 kcal for adolescents and with higher intake of regular soda (73.77 g and 88.28 g for children and 163.67 g and 107.25 g for adolescents) and sugar-sweetened beverages generally. Fast-food consumption increased intake of total fat (7.03-14.36 g), saturated fat (1.99-4.64 g), and sugar (5.71-16.24 g) for both age groups and sodium (396.28 mg) and protein (7.94 g) for adolescents. Full-service restaurant consumption was associated with increases in all nutrients examined. Additional key findings were (1) adverse effects on diet were larger for lower-income children and adolescents and (2) among adolescents, increased soda intake was twice as large when fast food was consumed away from home than at home. Fast-food and full-service restaurant consumption is associated with higher net total energy intake and poorer diet quality.

Energy consumption and energy-saving potential analysis of pollutant abatement systems in a 1000MW coal-fired power plant.

Science.gov (United States)

Yang, Hang; Zhang, Yongxin; Zheng, Chenghang; Wu, Xuecheng; Chen, Linghong; Gao, Xiang; Fu, Joshua S

2018-05-10

The pollutant abatement systems are widely applied in the coal-fired power sector and the energy consumption was considered an important part of the auxiliary power. An energy consumption analysis and assessment model of pollutant abatement systems in a power unit was developed based on the dynamic parameters and technology. The energy consumption of pollutant abatement systems in a 1000 MW coal-fired power unit which meet the ultra-low emission limits and the factors of operating parameters including unit load and inlet concentration of pollutants on the operating power were analyzed. The results show that the total power consumption of the pollutant abatement systems accounted for 1.27% of the gross power generation during the monitoring period. The WFGD system consumed 67% of the rate while the SCR and ESP systems consumed 8.9% and 24.1%. The power consumption rate of pollutant abatement systems decreased with the increase of unit load and increased with the increase of the inlet concentration of pollutants. The operation adjustment was also an effective method to increase the energy efficiency. For example, the operation adjustment of slurry circulation pumps could promote the energy-saving operation of WFGD system. Implication Statement The application of pollutant abatement technologies increases the internal energy consumption of the power plant, which will lead to an increase of power generation costs. The real-time energy consumption of the different pollutant abatement systems in a typical power unit is analyzed based on the dynamic operating data. Further, the influence of different operating parameters on the operating power of the system and the possible energy-saving potential are analyzed.

Energy requirements of household consumption : a case study of The Netherlands

NARCIS (Netherlands)

Biesiot, W; Noorman, K.J.

This article describes the results of several research programmes that together aim at the development and application of methodologies that enable the study of long-term environmental effects (mainly related to the total household energy demand) of household consumption in relation to other

Integrated IDA–ANN–DEA for assessment and optimization of energy consumption in industrial sectors

International Nuclear Information System (INIS)

Olanrewaju, O.A.; Jimoh, A.A.; Kholopane, P.A.

2012-01-01

This paper puts forward an integrated approach, based on logarithmic mean divisia index (LMDI) – an index decomposition analysis (IDA) method, an artificial neural network (ANN) and a data envelopment analysis (DEA) for the analysis of total energy efficiency and optimization in an industrial sector. The energy efficiency assessment and the optimization of the proposed model use LMDI to decompose energy consumption into activity, structural and intensity indicators, which serve as inputs to the ANN. The ANN model is verified and validated by performing a linear regression comparison between the specifically measured energy consumption and the corresponding predicted energy consumption. The proposed approach utilizes the measure-specific, super-efficient DEA model for sensitivity analysis to determine the critical measured energy consumption and its optimization reductions. The proposed method is validated by its application to determine the efficiency computation and an analysis of historical data as well as the prediction and optimization capability of the Canadian industrial sector. -- Highlights: ► An integrated IDA–ANN–DEA model for energy management is proposed. ► The model relies on aggregate energy and GDP data. ► The model explains how energy can be managed in the Canadian Industrial sector.

Energy consumption and income. A semiparametric panel data analysis

Energy Technology Data Exchange (ETDEWEB)

Nguyen-Van, Phu [BETA, CNRS and Universite de Strasbourg, 61 avenue de la Foret Noire, F-67085 Strasbourg (France)

2010-05-15

This paper proposes a semiparametric analysis for the study of the relationship between energy consumption per capita and income per capita for an international panel dataset. It shows little evidence for the existence of an environmental Kuznets curve for energy consumption. Energy consumption increases with income for a majority of countries and then stabilizes for very high income countries. Neither changes in energy structure nor macroeconomic cycle/technological change have significant effect on energy consumption. (author)

uFLIP: Understanding the Energy Consumption of Flash Devices

DEFF Research Database (Denmark)

Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

2010-01-01

Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

Energy saving and consumption reducing evaluation of thermal power plant

Science.gov (United States)

Tan, Xiu; Han, Miaomiao

2018-03-01

At present, energy saving and consumption reduction require energy saving and consumption reduction measures for thermal power plant, establishing an evaluation system for energy conservation and consumption reduction is instructive for the whole energy saving work of thermal power plant. By analysing the existing evaluation system of energy conservation and consumption reduction, this paper points out that in addition to the technical indicators of power plant, market activities should also be introduced in the evaluation of energy saving and consumption reduction in power plant. Ttherefore, a new evaluation index of energy saving and consumption reduction is set up and the example power plant is calculated in this paper. Rresults show that after introducing the new evaluation index of energy saving and consumption reduction, the energy saving effect of the power plant can be judged more comprehensively, so as to better guide the work of energy saving and consumption reduction in power plant.

Development of German energy consumption: A deterministic study of energy-relevant customer groups

International Nuclear Information System (INIS)

Baumert, M.

1994-01-01

A detailed study of the characteristic features of group-specific energy consumption was conducted (identification of the factors determining energy consumption of the productive sector, private households and private mobility demand). The question of who shall determine energy consumption in the future is analysed. This question is answered in a demand-specific study of consumption patterns and -effects. (orig./UA) [de

State energy data report 1994: Consumption estimates

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-10-01

This document provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), operated by EIA. SEDS provides State energy consumption estimates to members of Congress, Federal and State agencies, and the general public, and provides the historical series needed for EIA`s energy models. Division is made for each energy type and end use sector. Nuclear electric power is included.

State energy data report 1994: Consumption estimates

International Nuclear Information System (INIS)

1996-10-01

This document provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), operated by EIA. SEDS provides State energy consumption estimates to members of Congress, Federal and State agencies, and the general public, and provides the historical series needed for EIA's energy models. Division is made for each energy type and end use sector. Nuclear electric power is included

Decomposition of CO2 emissions change from energy consumption in Brazil: Challenges and policy implications

International Nuclear Information System (INIS)

Freitas, Luciano Charlita de; Kaneko, Shinji

2011-01-01

This study evaluates the changes in CO 2 emissions from energy consumption in Brazil for the period 1970-2009. Emissions are decomposed into production and consumption activities allowing computing the full set of energy sources consumed in the country. This study aims to develop a comprehensive and updated picture of the underlying determinants of emissions change from energy consumption in Brazil along the last four decades, including for the first time the recently released data for 2009. Results demonstrate that economic activity and demographic pressure are the leading forces explaining emission increase. On the other hand, carbon intensity reductions and diversification of energy mix towards cleaner sources are the main factors contributing to emission mitigation, which are also the driving factors responsible for the observed decoupling between CO 2 emissions and economic growth after 2004. The cyclical patterns of energy intensity and economy structure are associated to both increments and mitigation on total emission change depending on the interval. The evidences demonstrate that Brazilian efforts to reduce emissions are concentrated on energy mix diversification and carbon intensity control while technology intensive alternatives like energy intensity has not demonstrated relevant progress. Residential sector displays a marginal weight in the total emission change. - Research highlights: → Article provides an updated evaluation on the changes in CO 2 emissions from energy consumption in Brazil, including the recently released data for 2009. → Results demonstrate that progress in energy mix diversification and associated factors are the most important factors contributing to emission mitigation in Brazil. → Negligence in technology intensive factors, as energy intensity, has offset most efforts on emission mitigation related to energy consumption. → Paper announces a first episode of absolute decoupling between GDP growth and CO 2 emission

A grey neural network and input-output combined forecasting model. Primary energy consumption forecasts in Spanish economic sectors

International Nuclear Information System (INIS)

Liu, Xiuli; Moreno, Blanca; García, Ana Salomé

2016-01-01

A combined forecast of Grey forecasting method and neural network back propagation model, which is called Grey Neural Network and Input-Output Combined Forecasting Model (GNF-IO model), is proposed. A real case of energy consumption forecast is used to validate the effectiveness of the proposed model. The GNF-IO model predicts coal, crude oil, natural gas, renewable and nuclear primary energy consumption volumes by Spain's 36 sub-sectors from 2010 to 2015 according to three different GDP growth scenarios (optimistic, baseline and pessimistic). Model test shows that the proposed model has higher simulation and forecasting accuracy on energy consumption than Grey models separately and other combination methods. The forecasts indicate that the primary energies as coal, crude oil and natural gas will represent on average the 83.6% percent of the total of primary energy consumption, raising concerns about security of supply and energy cost and adding risk for some industrial production processes. Thus, Spanish industry must speed up its transition to an energy-efficiency economy, achieving a cost reduction and increase in the level of self-supply. - Highlights: • Forecasting System Using Grey Models combined with Input-Output Models is proposed. • Primary energy consumption in Spain is used to validate the model. • The grey-based combined model has good forecasting performance. • Natural gas will represent the majority of the total of primary energy consumption. • Concerns about security of supply, energy cost and industry competitiveness are raised.

Energy consumption and economic growth in China: A reconciliation

International Nuclear Information System (INIS)

Talha Yalta, A.; Cakar, Hatice

2012-01-01

In conventional causality testing based on asymptotic distribution theory, there is a high risk of wrongly rejecting the true null of no causality especially when the sample size is as small as typically seen in the literature. In this study, we offer a formal diagnosis of the existing contradictory results on the causal relationship between energy consumption and real GDP. We also employ a time series oriented advanced data generation process to perform simulation based inference for the People's Republic of China. Our study covers the 1971–2007 period and considers five different aggregated and disaggregated energy consumption measures as well as three different lag orders in both a bivariate as well as a multivariate frameworks. Our maximum entropy bootstrap based analysis, which avoids pretest biases and is also robust to Type I errors, supports the neutrality hypothesis in 53 out of the total of 60 model estimations. The strong results show that coarse aggregate data has a limited potential to observe the complex causal linkages between energy consumption and economic growth. Future policy oriented research on this nexus requires more focused analyses based on sectoral and provincial data. - Highlights: ► Some of the contradictory findings on the energy–growth nexus are due to asymptotic testing under small samples. ► The bootstrap method can provide huge improvements upon the approximations of asymptotic theory. ► 53 out of a total of 60 models that we consider consistently support the neutrality hypothesis for China. ► Future policy oriented research on this nexus should aim toward detailed analyses using sectoral and provincial data.

10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

Science.gov (United States)

2010-01-01

... consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy... of energy consumption and water consumption of automatic commercial ice makers. (a) Scope. This... consumption, but instead calculate the energy use rate (kWh/100 lbs Ice) by dividing the energy consumed...

Energy consumption and energy saving : their evolution in Spain and other countries

International Nuclear Information System (INIS)

Serrano Martinez, F.

1995-01-01

The article shows the development of energy consumption since the seventies in three main energy consuming sectors: industry, residential services and transport. While the energy intensity and consumption in the industrial sector have considerably decreased- taking 100 as index in 1973, this was 68 in 1988-in the other sectors, the increase of comfort in houses and business offices, as well as the number or automobiles, have made consumption in these sectors increase despite the efforts made in the improvement of return of installations and reduction of cars consumption. In the industry, large energy savings coincide with remarkable technological innovations and for the future, the achieved savings and future trends, as well as conditions for the energy saving, are analyzed for the rest of the sectors. (Author)

Person and consumption profiles. Building integrated energy supply; Person- og forbrugsprofiler. Bygningsintegreret energiforsyning

Energy Technology Data Exchange (ETDEWEB)

Jensen, Rasmus L.; Noergaard, J.; Daniels, O.; Justesen, R.O.

2011-08-15

In the future, buildings will not only act as consumers of energy but as producers as well. For these ''prosumers'', energy production by use of solar panels, photovoltaics and heat pumps etc will be essential. The objective of this project was to find the most optimal combinations of building insulation and use of renewable energy sources in existing buildings in terms of economics and climate impacts. Five houses were analyzed based on different personal load, consumption profiles, solar orientation and proposed building envelope improvements and use of combinations of renewable energy systems. The present report describes how person and consumption profiles used in this project are developed, and which data that form the basis for these profiles. The increasing requirements for energy in the building sector mean that the primary energy consumption ends close to or below zero within the next years. Therefore, the consumption in buildings becomes a relatively larger and larger part of the total energy demand in dwellings. It is important to investigate whether there are seasonal distributions of power and water consumption, because it might give a more exact result and describe the reality better than by using yearly values. First, the personal load determined, and then humidity and consumption of both power and hot water is defined. Second, the hourly profiles are developed based on analyses of seasonal distributions. These profiles also include cold domestic water to see whether there is a correlation between this and hot domestic water. (ln)

Energy Consumption Management in Design

NARCIS (Netherlands)

Smit, Jaap

1997-01-01

A survey of the basic issues in low power design is presented, including techniques for the analysis of energy consumption in the early design phase of analog and digital circuits. The concept of energy complexity will be introduced in conjunction with techniques for parameterized energy management.

Optimization for energy consumption in drying section of fluting paper machine

Directory of Open Access Journals (Sweden)

Ghodbanan Shaaban

2017-01-01

Full Text Available Non-linear programming optimization method was used to optimize total steam and air consumption in the dryer section of multi-cylinder fluting paper machine. Equality constraints of the optimization model were obtained from specified process blocks considering mass and energy balance relationships in drying and heat recovery sections. Inequality constraints correspond to process parameters such as production capacity, operating conditions, and other limitations. Using the simulation, the process parameters can be optimized to improve the energy efficiency and heat recovery performance. For a corrugating machine, optimized parameters show the total steam use can be reduced by about 11% due to improvement of the heat recovery performance and optimization of the operating conditions such as inlet web dryness, evaporation rate, and exhaust air humidity, accordingly total steam consumption can be decreased from about 1.71 to 1.53 tonnes steam per tonne paper production. The humidity of the exhaust air should be kept as high as possible to optimize the energy performance and avoid condensation in the pocket dryers and hood exhaust air. So the simulation shows the supply air should be increased by about 10% to achieve optimal humidity level which was determined about 0.152 kgH2O/(kg dry air.

Energy consumption for shortcuts to adiabaticity

Science.gov (United States)

Torrontegui, E.; Lizuain, I.; González-Resines, S.; Tobalina, A.; Ruschhaupt, A.; Kosloff, R.; Muga, J. G.

2017-08-01

Shortcuts to adiabaticity let a system reach the results of a slow adiabatic process in a shorter time. We propose to quantify the "energy cost" of the shortcut by the energy consumption of the system enlarged by including the control device. A mechanical model where the dynamics of the system and control device can be explicitly described illustrates that a broad range of possible values for the consumption is possible, including zero (above the adiabatic energy increment) when friction is negligible and the energy given away as negative power is stored and reused by perfect regenerative braking.

Actual energy consumption in dwellings. The effect of energy performance regulations and occupant behaviour

Energy Technology Data Exchange (ETDEWEB)

Guerra Santin, O.

2010-10-19

Residential buildings have continuously improved in energy efficiency, partly as a consequence of the introduction of energy regulations in many countries. Although better thermal properties and systems efficiency have lowered energy consumption for space heating in recent decades, substantial differences in energy consumption in similar dwellings are still being observed. These differences in consumption are thought to be caused by differences in occupancy patterns, by quality of construction and by rebound effects. This research addresses the effect of energy performance regulations and occupant behavior on energy consumption for space and water heating in dwellings built after the introduction of the energy performance regulations in the Netherlands. The results of this research show that improving the energy efficiency of buildings alone is not enough to decrease that energy consumption. The large differences found in the use of dwellings indicate that, especially in energy efficient houses, occupant behavior provides an opportunity for further reductions in the energy consumption for space heating which could boost the efforts to conserve energy worldwide.

Total, Free, and Added Sugar Consumption and Adherence to Guidelines: The Dutch National Food Consumption Survey 2007-2010.

Science.gov (United States)

Sluik, Diewertje; van Lee, Linde; Engelen, Anouk I; Feskens, Edith J M

2016-01-28

A high sugar intake is a subject of scientific debate due to the suggested health implications and recent free sugar recommendations by the WHO. The objective was to complete a food composition table for added and free sugars, to estimate the intake of total sugars, free sugars, and added sugars, adherence to sugar guidelines and overall diet quality in Dutch children and adults. In all, 3817 men and women (7-69 years) from the Dutch National Food Consumption Survey 2007-2010 were studied. Added and free sugar content of products was assigned by food composition tables and using labelling and product information. Diet was assessed with two 24-h recalls. Diet quality was studied in adults with the Dutch Healthy Diet-index. Total sugar intake was 22% Total Energy (%TE), free sugars intake 14 %TE, and added sugar intake 12 %TE. Sugar consumption was higher in children than adults. Main food sources of sugars were sweets and candy, non-alcoholic beverages, dairy, and cake and cookies. Prevalence free sugar intake diet quality was similar comparing adults adherent and non-adherent to the sugar guidelines, although adherent adults had a higher intake of dietary fiber and vegetables. Adherence to the WHO free sugar guidelines of sugar guidelines was not strongly associated with higher diet quality in adults.

Regional energy consumption and income differences in Denmark

DEFF Research Database (Denmark)

Klinge Jacobsen, Henrik

2003-01-01

income of households grouped in income deciles and by other characteristics. The impact of environmental taxes depends on income levels in rural areas compared to income in urban areas. In Denmark, the income difference is found to be quite small, but energy consumption and, therefore, also the burden......Internationally a debate on the distributional impact of energy taxation has focused on the tax burden relative to income. The general conclusion is that taxes are regressive, but at a varying degree for different countries. This study examines the relationship between location, income, heating...... technology characteristics and the energy tax that households pay. The article aims at identifying general implications of energy taxes with respect to different impacts on population groups depending on location and income. Tax payments associated with energy use are considered relative to total disposable...

State energy data report 1995 - consumption estimates

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public, and (2) to provide the historical series necessary for EIA`s energy models.

Analysis of asymmetries in air pollution with water resources, and energy consumption in Iran.

Science.gov (United States)

Ashouri, Mohammad Javad; Rafei, Meysam

2018-04-17

Iran should pay special attention to its excessive consumption of energy and air pollution due to the limited availability of water resources. This study explores the effects of the consumption of energy and water resources on air pollution in Iran from 1971 to 2014. It utilizes the non-linear autoregressive distributed lag approach to establish a robust relationship between the variables which show that both long- and short-run coefficients are asymmetrical. The positive and negative aspects of the long-run coefficients of energy consumption and water resources were found to be 0.19, - 1.63, 0.18, and 2.36, respectively, while only the negative ones were significant for energy consumption. Based on the cumulative effects, it can be established that there are important and significant differences in the responses of air pollution to positive and negative changes in water productivity and energy consumption. In particular, CO 2 gas emissions are affected by negative changes in H 2 O productivity both in terms of the total and the GDP per unit of energy use in Iran. In regard to short-run results, considerable asymmetric effects occur on all the variables for CO 2 emissions. Based on the results obtained, some recommendations are presented, which policymakers can adopt in efforts to address the issues of pollution and consumption.

10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Determination of the design energy consumption and design... Alternative § 434.508 Determination of the design energy consumption and design energy cost. 508.1The Design Energy Consumption shall be calculated by modeling the Proposed Design using the same methods...

Household consumption of different generations. Purchase of electric appliances and energy; Hushaallens konsumtion i olika generationer. Inkoep av eldriven hushaallsutrustning och energi

Energy Technology Data Exchange (ETDEWEB)

Carlsson-Kanyama, Annika; Stenerus, Ann-Sofie

2008-02-15

based on generation and gender can therefore be taken into account when adapting information and other policy instruments to the target group, in the effort to increase energy efficiency. A reflection is that the term post-material lifestyle is misleading since the post-material lifestyle require large amounts of energy for travelling and communication. We suggest further studies to calculate the total energy use and the total emissions of carbon dioxide from different generations consumption. This can create a better understanding of what alternative consumption patterns the different generations may envisage and feel attracted to

The analysis of energy consumption of the transport and manipulation process of Fanuc AM100iB robot

Science.gov (United States)

Cholewa, A.; Świder, J.; Zbilski, A.

2017-08-01

This article describes test results of energy consumption of Fanuc ArcMate 100iB robot during realization of the transport and manipulation process. The energy consumption test involved the acquisition of values of angular positions of the robot’s encoder shafts and values of tensions and expansions of the electrical currents in three phases of each engine. Based on the simulation results, the analysis of energy consumption was carried out, which specified the tested palletizing process using the set of complete and partial decompositions of the energy consumption of all these factors, which in significant degree impacted the amount of energy taken during the process. Quality of the data provided by the analysis of energy consumption was assessed through validation of results, which involved direct comparison of corresponding parameters, which values were measured and calculated. With regards to the developed analysis of energy consumption, computerized techniques were used to determine the impact of all material factors on the total energy consumption of the machine. The work presents the most significant results of the obtained outcomes.

Trends in Data Centre Energy Consumption under the European Code of Conduct for Data Centre Energy Efficiency

Directory of Open Access Journals (Sweden)

Maria Avgerinou

2017-09-01

Full Text Available Climate change is recognised as one of the key challenges humankind is facing. The Information and Communication Technology (ICT sector including data centres generates up to 2% of the global CO2 emissions, a number on par to the aviation sector contribution, and data centres are estimated to have the fastest growing carbon footprint from across the whole ICT sector, mainly due to technological advances such as the cloud computing and the rapid growth of the use of Internet services. There are no recent estimations of the total energy consumption of the European data centre and of their energy efficiency. The aim of this paper is to evaluate, analyse and present the current trends in energy consumption and efficiency in data centres in the European Union using the data submitted by companies participating in the European Code of Conduct for Data Centre Energy Efficiency programme, a voluntary initiative created in 2008 in response to the increasing energy consumption in data centres and the need to reduce the related environmental, economic and energy supply security impacts. The analysis shows that the average Power Usage Effectiveness (PUE of the facilities participating in the programme is declining year after year. This confirms that voluntary approaches could be effective in addressing climate and energy issue.

Climate impacts on extreme energy consumption of different types of buildings.

Science.gov (United States)

Li, Mingcai; Shi, Jun; Guo, Jun; Cao, Jingfu; Niu, Jide; Xiong, Mingming

2015-01-01

Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382). The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings.

Pakistan energy consumption scenario and some alternate energy option

International Nuclear Information System (INIS)

Maher, M.J.

1997-01-01

Pakistan with its energy-deficient resources is highly dependent on import-oriented energy affected the economy because of repeated energy price hike on international horizon. The energy consumption pattern in Pakistan comprises about two-third in commercial energy and one-third in non-commercial forms. Most of the country's energy requirements are met by oil, gas hydro power, coal, nuclear energy and thermal power. Pakistan meets it's commercial energy requirements indigenously up to 64%. The balance of deficit of 35-40% is met through import. The consumption of various agro-residues and wood as fuel also plays a vital role. The analysis shows that emphasis needs to be placed on new and renewable resources of energy besides adopting technologies for energy conservation. Renewable energy depends on energy income and constitutes the development process. The are several renewable energy options such as biogas technology, micro-hydro power generation, direct solar energy and biomass energy conservation etc. By improving the conservation techniques as designs of solar converters, pre treating the biomass fuel, increasing the effectiveness of carbonization and pyrolysis increases the energy production. (A.B.)

Disaggregate energy consumption and industrial production in South Africa

International Nuclear Information System (INIS)

Ziramba, Emmanuel

2009-01-01

This paper tries to assess the relationship between disaggregate energy consumption and industrial output in South Africa by undertaking a cointegration analysis using annual data from 1980 to 2005. We also investigate the causal relationships between the various disaggregate forms of energy consumption and industrial production. Our results imply that industrial production and employment are long-run forcing variables for electricity consumption. Applying the [Toda, H.Y., Yamamoto, T., 1995. Statistical inference in vector autoregressions with possibly integrated processes. Journal of Econometrics 66, 225-250] technique to Granger-causality, we find bi-directional causality between oil consumption and industrial production. For the other forms of energy consumption, there is evidence in support of the energy neutrality hypothesis. There is also evidence of causality between employment and electricity consumption as well as coal consumption causing employment.

Integrated Urban System and Energy Consumption Model: Public and Singular Buildings

Directory of Open Access Journals (Sweden)

Rocco Papa

2014-05-01

Full Text Available The present paper illustrates the results of the first steps of a study on one aspect investigated as the preliminary step of the definition of the analysis - comprehension model of the relation between: city, buildings, and user behavior, for the reduction of energy consumption within the research project “Smart Energy Master” for the energetic governance of the territory (PON_MIUR n. pos. 04a2_00120 CUP Ricerca: E61H12000130005, at the Department of Civil, Building and Environmental Engineering - University of Naples Federico II, principal investigator prof. Carmela Gargiulo.Specifically the literary review aimed at determining if, and in what measure, the presence of public and singular buildings is present in the energy consumption estimate models,  proposed by the scientific community, for the city or neighborhood scale.The difficulties in defining the weight of these singular buildings on the total energy consumption and the impossibility to define mean values that are significant for all subsets and different types as well as for each one, have forced model makers to either ignore them completely or chose a portion of this specific stock to include.

Estimating building energy consumption using extreme learning machine method

International Nuclear Information System (INIS)

Naji, Sareh; Keivani, Afram; Shamshirband, Shahaboddin; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Mansor, Zulkefli; Lee, Malrey

2016-01-01

The current energy requirements of buildings comprise a large percentage of the total energy consumed around the world. The demand of energy, as well as the construction materials used in buildings, are becoming increasingly problematic for the earth's sustainable future, and thus have led to alarming concern. The energy efficiency of buildings can be improved, and in order to do so, their operational energy usage should be estimated early in the design phase, so that buildings are as sustainable as possible. An early energy estimate can greatly help architects and engineers create sustainable structures. This study proposes a novel method to estimate building energy consumption based on the ELM (Extreme Learning Machine) method. This method is applied to building material thicknesses and their thermal insulation capability (K-value). For this purpose up to 180 simulations are carried out for different material thicknesses and insulation properties, using the EnergyPlus software application. The estimation and prediction obtained by the ELM model are compared with GP (genetic programming) and ANNs (artificial neural network) models for accuracy. The simulation results indicate that an improvement in predictive accuracy is achievable with the ELM approach in comparison with GP and ANN. - Highlights: • Buildings consume huge amounts of energy for operation. • Envelope materials and insulation influence building energy consumption. • Extreme learning machine is used to estimate energy usage of a sample building. • The key effective factors in this study are insulation thickness and K-value.

Total dietary sugar consumption does not influence sleep or behaviour in Australian children.

Science.gov (United States)

Watson, Emily J; Coates, Alison M; Banks, Siobhan; Kohler, Mark

2018-06-01

This study aimed to compare sugar intake in Australian children with current guidelines and determine if total sugar consumption as a percentage of energy (sugar %E) exacerbates the relationship between sleep and behaviour. A sample of 287 children aged 8-12 years (boys 48.8%, age: 10.7 ± 1.3 years), and their parents/guardians completed a battery of questionnaires. Children completed a food frequency questionnaire, and parents completed demographic, sleep, and behaviour questionnaires. Average sugar intake was 134.9 ± 71.7 g per day (sugar %E 26.0 ± 7.0%), and only 55 (19%) participants did not exceed the recommended sugar intake limit. Correlations and logistical regressions indicated that sugar %E was not associated with sleep or behavioural domains (r range = -0.07-0.08; p range = .173-.979) nor contributed to the prediction of sleep behaviour problems (p range = .16-.80). Whilst a high proportion of children consumed above the recommended amount of daily total sugar, total sugar consumption was not related to behavioural or sleep problems, nor affected the relationship between these variables.

Climate impacts on extreme energy consumption of different types of buildings.

Directory of Open Access Journals (Sweden)

Mingcai Li

Full Text Available Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382. The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings.

Energy consumption, political regime and economic growth in sub-Saharan Africa

International Nuclear Information System (INIS)

Adams, Samuel; Klobodu, Edem Kwame Mensah; Opoku, Eric Evans Osei

2016-01-01

In this paper, we examine the relationship between energy consumption and economic growth, and how democracy moderates this relationship using panel data of 16 sub-Saharan African (SSA) countries for the period 1971–2013. Employing a panel vector autoregressive model (PVAR) in a generalized method of moments (GMM) framework, the findings support the feedback hypothesis for energy consumption and growth. Second, the interaction variable (energy consumption and democracy) is positively and significantly related to economic growth, supporting the view that democracy moderates the energy consumption and growth nexus. Further, the results provide strong evidence of a uni-directional relationship from trade openness to energy consumption. Additionally, impulse responses and variance decompositions also confirm positive feedback relationships between energy consumption and economic growth, energy prices and economic growth. - Highlights: •Feedback exists between energy consumption and economic growth. •Democracy moderates the energy consumption and growth nexus. •positive feedback between energy prices and economic growth. •Uni-directional relationship from openness to energy consumption.

Changing practices of energy consumption

DEFF Research Database (Denmark)

Christensen, Toke Haunstrup; Friis, Freja; Skjølsvold, Tomas Moe

2017-01-01

to produce hydrogen for transport use), whereas others emphasise the role of individual consumers. The latter approach is dominant within the smart grid vision. In this paper, we explore implications of smart grid technologies in households for the everyday practices related to electricity consumption...... (microgeneration) influence the everyday practices? What kind of influence does the combination of PVs with other “smart” energy technologies have on everyday practices and electricity consumption patterns? A specific focus is on the time patterns of households’ energy consumption. The analysis is based...... settlement scheme (hourly versus annual net metering) and the trial context play a role. Also, the study finds a broader interest in increasing the level of self-sufficiency through combining PVs with home batteries. Finally, the paper discusses a distinct (male) gendering in relation to who is most actively...

Low energy consumption vortex wave flow membrane bioreactor.

Science.gov (United States)

Wang, Zhiqiang; Dong, Weilong; Hu, Xiaohong; Sun, Tianyu; Wang, Tao; Sun, Youshan

2017-11-01

In order to reduce the energy consumption and membrane fouling of the conventional membrane bioreactor (MBR), a kind of low energy consumption vortex wave flow MBR was exploited based on the combination of biofilm process and membrane filtration process, as well as the vortex wave flow technique. The experimental results showed that the vortex wave flow state in the membrane module could be formed when the Reynolds number (Re) of liquid was adjusted between 450 and 1,050, and the membrane flux declined more slowly in the vortex wave flow state than those in the laminar flow state and turbulent flow state. The MBR system was used to treat domestic wastewater under the condition of vortex wave flow state for 30 days. The results showed that the removal efficiency for CODcr and NH 3 -N was 82% and 98% respectively, and the permeate quality met the requirement of 'Water quality standard for urban miscellaneous water consumption (GB/T 18920-2002)'. Analysis of the energy consumption of the MBR showed that the average energy consumption was 1.90 ± 0.55 kWh/m 3 (permeate), which was only two thirds of conventional MBR energy consumption.

Disaggregate energy consumption and industrial production in South Africa

Energy Technology Data Exchange (ETDEWEB)

Ziramba, Emmanuel [Department of Economics, University of South Africa, P.O Box 392, UNISA 0003 (South Africa)

2009-06-15

This paper tries to assess the relationship between disaggregate energy consumption and industrial output in South Africa by undertaking a cointegration analysis using annual data from 1980 to 2005. We also investigate the causal relationships between the various disaggregate forms of energy consumption and industrial production. Our results imply that industrial production and employment are long-run forcing variables for electricity consumption. Applying the [Toda, H.Y., Yamamoto, T., 1995. Statistical inference in vector autoregressions with possibly integrated processes. Journal of Econometrics 66, 225-250] technique to Granger-causality, we find bi-directional causality between oil consumption and industrial production. For the other forms of energy consumption, there is evidence in support of the energy neutrality hypothesis. There is also evidence of causality between employment and electricity consumption as well as coal consumption causing employment. (author)

The effect of energy performance regulations on energy consumption

NARCIS (Netherlands)

Guerra-Santin, O.; Itard, L.

2012-01-01

Governments have developed energy performance regulations in order to lower energy consumption in the housing stock. Most of these regulations are based on the thermal quality of the buildings. In the Netherlands, the energy efficiency for new buildings is expressed as the EPC (energy performance

Household vehicles energy consumption 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-01

Household Vehicles Energy Consumption 1994 reports on the results of the 1994 Residential Transportation Energy Consumption Survey (RTECS). The RTECS is a national sample survey that has been conducted every 3 years since 1985. For the 1994 survey, more than 3,000 households that own or use some 6,000 vehicles provided information to describe vehicle stock, vehicle-miles traveled, energy end-use consumption, and energy expenditures for personal vehicles. The survey results represent the characteristics of the 84.9 million households that used or had access to vehicles in 1994 nationwide. (An additional 12 million households neither owned or had access to vehicles during the survey year.) To be included in then RTECS survey, vehicles must be either owned or used by household members on a regular basis for personal transportation, or owned by a company rather than a household, but kept at home, regularly available for the use of household members. Most vehicles included in the RTECS are classified as {open_quotes}light-duty vehicles{close_quotes} (weighing less than 8,500 pounds). However, the RTECS also includes a very small number of {open_quotes}other{close_quotes} vehicles, such as motor homes and larger trucks that are available for personal use.

Cash and in-kind transfers in poor rural communities in Mexico increase household fruit, vegetable, and micronutrient consumption but also lead to excess energy consumption.

Science.gov (United States)

Leroy, Jef L; Gadsden, Paola; Rodríguez-Ramírez, Sonia; de Cossío, Teresa González

2010-03-01

Conditional transfer programs are increasingly popular, but the impact on household nutrient consumption has not been studied. We evaluated the impact of the Programa de Apoyo Alimentario (PAL), a cash and in-kind transfer program, on the energy and nutrient consumption of poor rural households in Mexico. The program has been shown to reduce poverty. Beneficiary households received either a food basket (including micronutrient-fortified milk) or cash. A random sample of 206 rural communities in Southern Mexico was randomly assigned to 1 of 4 groups: a monthly food basket with or without health and nutrition education, a cash transfer with a cost to the government equivalent to the food basket (14 USD/mo) with education, or control. The impact after 14 mo of exposure was estimated in a panel of 5823 households using a double difference regression model with household fixed effects. PAL was associated with increases (P consumption of total energy (5-9%), energy from fruits and vegetables (24-28%), and energy from animal source foods (24-39%). It also affected iron, zinc, and vitamin A and C consumption (P consumption of energy and all nutrients was greater in the food basket group (P energy-deficient should be carefully redesigned to ensure that pulling poor families out of poverty leads to improved micronutrient intake but not to increased energy consumption.

The effects of utility cost reduction on residential energy consumption in Hungary – a decomposition analysis

Directory of Open Access Journals (Sweden)

Tekla Sebestyén Szép

2017-01-01

Full Text Available The residential energy consumption is influenced by a lot of factors. Understanding and calculating these factors is essential to making conscious energy policy decisions and feedbacks. Since 2013 the energy prices for households have been controlled by the government in Hungary and as a result of the utility cost reduction program a sharp decline can be observed in residential electricity, district heating and natural gas prices. This paper applies the LMDI (~Logarithmic Mean Division Index method to decompose the absolute change of the residential energy consumption during the period of 2010-2015. We calculate the price, the intensive structure (it means the change of energy expenditure share on energy sources, the extensive structure (it is in connection with the change of energy expenditure share in total expenditure, expenditure (it is the change of per capita total expenditure and population effect. All of that shows the impact of the specific factor on the residential energy consumption by income deciles. Our results have verified the preliminary expectations: the decreasing energy prices for households have a positive impact on energy use and it has been strengthened by the expenditure effect as well. However, the intensive structure, the extensive structure and the population effect have largely offset it.

ENERGY CONSUMPTION AND REAL GDP IN IRAN

Directory of Open Access Journals (Sweden)

Ali Akbar Naji Meidani

2014-01-01

Full Text Available As one of the most important production factors and one of the most urgent final products, energy has a special position in the growth and development of the country. This paper examines the causal relationship between Real GDP and energy consumption in various economic sectors including (household and commercial, industry, transportation and agriculture sectors for Iran during 1967–2010 using the time series technique known as the Toda-Yamamoto method. Moreover, an error correction model is also estimated so that the results of these two methods are compared. We found a strong unidirectional causality from energy consumption in industry sector to real gross domestic product. Energy consumption in industry sector can observably promote the development of economy.

Water Use in the United States Energy System: A National Assessment and Unit Process Inventory of Water Consumption and Withdrawals.

Science.gov (United States)

Grubert, Emily; Sanders, Kelly T

2018-06-05

The United States (US) energy system is a large water user, but the nature of that use is poorly understood. To support resource comanagement and fill this noted gap in the literature, this work presents detailed estimates for US-based water consumption and withdrawals for the US energy system as of 2014, including both intensity values and the first known estimate of total water consumption and withdrawal by the US energy system. We address 126 unit processes, many of which are new additions to the literature, differentiated among 17 fuel cycles, five life cycle stages, three water source categories, and four levels of water quality. Overall coverage is about 99% of commercially traded US primary energy consumption with detailed energy flows by unit process. Energy-related water consumption, or water removed from its source and not directly returned, accounts for about 10% of both total and freshwater US water consumption. Major consumers include biofuels (via irrigation), oil (via deep well injection, usually of nonfreshwater), and hydropower (via evaporation and seepage). The US energy system also accounts for about 40% of both total and freshwater US water withdrawals, i.e., water removed from its source regardless of fate. About 70% of withdrawals are associated with the once-through cooling systems of approximately 300 steam cycle power plants that produce about 25% of US electricity.

Household pathway selection of energy consumption during urbanization process in China

International Nuclear Information System (INIS)

Sun, Chuanwang; Ouyang, Xiaoling; Cai, Hongbo; Luo, Zhichao; Li, Aijun

2014-01-01

Highlights: • Energy consumption patterns have long-term impacts on energy demand. • We explore determinants and structure of household energy consumption. • Tobit and OLS models are adopted to explore factors influencing energy expenditure. • Residential energy consumption in 2030 is evaluated using scenario analysis. - Abstract: China’s growing energy demand is driven by urbanization. Facing the problem of energy scarcity, residential energy consumption is a crucial area of energy conservation and emissions reduction. Household energy consumption patterns, which are characterized by effects of “path lock-in”, have long-term impacts on China’s energy demand. Based on the survey data, this paper explores factors that influence household energy consumption and analyzes the structure of residential energy consumption in China. Based on the results of analysis of variance (ANOVA), this paper applies the Tobit and Ordinary Least Squares (OLS) models to investigate impacts of variables of “the tiered pricing for household electricity (TPHE)”, “solar energy usage”, “automobile ownership”, “rural or urban areas”, “household income” and “city scale” on the residential energy expenditure. In addition, household energy consumption is estimated under different scenarios including improving the utilization of solar energy, rise in energy prices and the increase in automobile ownership. Residential energy consumption in 2030 is evaluated by simulating different models for urban development. Policy recommendations are suggested for China’s urban development strategy, new energy development and household pathway selection of energy consumption

The relationship between energy consumption structure, economic structure and energy intensity in China

International Nuclear Information System (INIS)

Feng Taiwen; Sun Linyan; Zhang Ying

2009-01-01

This paper investigates the long-run equilibrium relationships, temporal dynamic relationships and causal relationships between energy consumption structure, economic structure and energy intensity in China. Time series variables over the periods from 1980 to 2006 are employed in empirical tests. Cointegration tests suggest that these three variables tend to move together in the long-run. In addition, Granger causality tests indicate that there is a unidirectional causality running from energy intensity to economic structure but not vice versa. Impulse response analysis provides reasonable evidences that one shock of the three variables will cause the periods of destabilized that followed. However, the impact of the energy consumption structure shock on energy intensity and the impact of the economic structure shock on energy consumption structure seem to be rather marginal. The findings have significant implications from the point of view of energy conservation and economic development. In order to decrease energy intensity, Chinese government must continue to reduce the proportion of coal in energy consumption, increase the utilization efficiency of coal and promote the upgrade of economic structure. Furthermore, a full analysis of factors that may relate to energy intensity (e.g. energy consumption structure, economic structure) should be conducted before making energy policies.

Decomposition of CO{sub 2} emissions change from energy consumption in Brazil: Challenges and policy implications

Energy Technology Data Exchange (ETDEWEB)

Freitas, Luciano Charlita de, E-mail: lucianofreitas@hiroshima-u.ac.j [Graduate School for International Development and Cooperation, Development Policy, Hiroshima University 1-5-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8529 (Japan); Kaneko, Shinji [Graduate School for International Development and Cooperation, Development Policy, Hiroshima University 1-5-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8529 (Japan)

2011-03-15

This study evaluates the changes in CO{sub 2} emissions from energy consumption in Brazil for the period 1970-2009. Emissions are decomposed into production and consumption activities allowing computing the full set of energy sources consumed in the country. This study aims to develop a comprehensive and updated picture of the underlying determinants of emissions change from energy consumption in Brazil along the last four decades, including for the first time the recently released data for 2009. Results demonstrate that economic activity and demographic pressure are the leading forces explaining emission increase. On the other hand, carbon intensity reductions and diversification of energy mix towards cleaner sources are the main factors contributing to emission mitigation, which are also the driving factors responsible for the observed decoupling between CO{sub 2} emissions and economic growth after 2004. The cyclical patterns of energy intensity and economy structure are associated to both increments and mitigation on total emission change depending on the interval. The evidences demonstrate that Brazilian efforts to reduce emissions are concentrated on energy mix diversification and carbon intensity control while technology intensive alternatives like energy intensity has not demonstrated relevant progress. Residential sector displays a marginal weight in the total emission change. - Research highlights: {yields} Article provides an updated evaluation on the changes in CO{sub 2} emissions from energy consumption in Brazil, including the recently released data for 2009. {yields} Results demonstrate that progress in energy mix diversification and associated factors are the most important factors contributing to emission mitigation in Brazil. {yields} Negligence in technology intensive factors, as energy intensity, has offset most efforts on emission mitigation related to energy consumption. {yields} Paper announces a first episode of absolute decoupling between

Consumption of fuels and energy in the coking industry and ways of reducing consumption

Energy Technology Data Exchange (ETDEWEB)

Vasil' ev, Yu.S.; Tsel' ik, M.P.; Belkina, T.V. (Khar' kovskii Nauchno-Issledovatel' skii Uglekhimicheski Institut (USSR))

1989-08-01

Coking plants in the USSR consume 4,000 million kWh electric energy, 100 million GJ heat energy and 35,000 million m{sup 3} gaseous fuels per year. Structure of energy consumption is the following: 68% gaseous fuels, 24% steam and 8% electric energy. Processes of coal preparation, crushing, mixing, coking and quenching are analyzed from the point of view of energy consumption. The following methods for reducing energy consumption are discussed: using the FM-25 flotation machines for flotation of coking coal slurries, briquetting the whole coal charge for coking, optimization of air supply rates for combustion of gases used for coke oven heating, use of control systems for coke oven heating considering coal charge density, waste heat utilization from quenching. 4 refs.

Estimates of US biomass energy consumption 1992

International Nuclear Information System (INIS)

1994-01-01

This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the US economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large

Estimates of US biomass energy consumption 1992

Energy Technology Data Exchange (ETDEWEB)

1994-05-06

This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the US economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large.

The long-term relationships among China's energy consumption sources and adjustments to its renewable energy policy

International Nuclear Information System (INIS)

Zou Gaolu

2012-01-01

To reduce its consumption of coal and oil in its primary energy consumption, China promotes the development of renewable energy resources. I have analysed the long-term relationship among China's primary energy consumption sources. Changes in coal consumption lead those in the consumption of other energy sources in the long term. Coal and oil fuels substitute for each other equally. The long-term elasticities of China's coal consumption relative to its hydroelectricity consumption were greater than one and nearly equal during the two sample periods. Therefore, increased hydroelectricity consumption did not imply a reduction in coal consumption. China holds abundant hydroelectricity, wind and, solar energy potential. China must prevent an excessive escalation of its economy and resultant energy demand to realise a meaningful substitution of coal with hydroelectricity. Moreover, China must develop and use wind and solar energy sources. Natural gas can be a good substitute for coal, given its moderate price growth and affordable price levels. - Highlights: ► Coal consumption changes lead those of other energy sources in the long term. ► Coal and oil fuels substitute for each other equally. ► Increased hydroelectricity consumption has not meant lower coal consumption. ► Wind, solar and natural gas are China's promising energy sources.

Energy consumption and economic growth revisited in African countries

Energy Technology Data Exchange (ETDEWEB)

Eggoh, Jude C., E-mail: comlanvi-jude.eggoh@univ-orleans.fr [Laboratoire d' Economie d' Orleans (LEO), Universite d' Orleans, Rue de Blois, BP: 6739, 45067 Orleans Cedex 2 (France); Bangake, Chrysost [Laboratoire d' Economie d' Orleans (LEO), Universite d' Orleans, Rue de Blois, BP: 6739, 45067 Orleans Cedex 2 (France); Universite d' Artois and Laboratoire EQUIPPE, Lille 1, FSES, 59655 Villeneuve d' Ascq Cedex (France); Rault, Christophe [Laboratoire d' Economie d' Orleans (LEO), Universite d' Orleans, Rue de Blois, BP: 6739, 45067 Orleans Cedex 2 (France); Toulouse Business School (France)

2011-11-15

The aim of this paper is to provide new empirical evidence on the relationship between energy consumption and economic growth for 21 African countries over the period from 1970 to 2006, using recently developed panel cointegration and causality tests. The countries are divided into two groups: net energy importers and net energy exporters. It is found that there exists a long-run equilibrium relationship between energy consumption, real GDP, prices, labor and capital for each group of countries as well as for the whole set of countries. This result is robust to possible cross-country dependence and still holds when allowing for multiple endogenous structural breaks, which can differ among countries. Furthermore, we find that decreasing energy consumption decreases growth and vice versa, and that increasing energy consumption increases growth, and vice versa, and that this applies for both energy exporters and importers. Finally, there is a marked difference in the cointegration relationship when country groups are considered. - Highlights: > We assess the energy consumption and economic growth nexus in 21 African countries. > There exists a long-run relationship between energy consumption and economic growth. > This result is robust to cross-country dependence and for structural breaks. > Our findings finally support the feedback hypothesis of bidirectional causality.

Structural, geographic, and social factors in urban building energy use: Analysis of aggregated account-level consumption data in a megacity

International Nuclear Information System (INIS)

Porse, Erik; Derenski, Joshua; Gustafson, Hannah; Elizabeth, Zoe; Pincetl, Stephanie

2016-01-01

Residential and commercial buildings comprise approximately forty percent of total energy consumption and carbon dioxide emissions in the U.S. Yet, while California spends $1.5 billion annually on energy efficiency programs, limited research has explored how building energy consumption varies within cities, including the social and structural factors that influence electricity and natural gas use. We present results from an analysis of aggregated account-level utility billing data for energy consumption across the over two million properties in Los Angeles County. Results show that consumption in L.A. County varies widely with geography, income, building characteristics, and climate. Several higher-income areas have greater total energy use per building even in cooler climates, while many lower-income regions rank higher for energy use per square-foot. Energy consumption also correlates with building age, which varies widely throughout the region. Our results demonstrate the many complex and interrelated factors that influence urban energy use. While billing data is critical for devising energy efficiency programs that actually realize estimated savings and promote more sustainable cities, opening access to such data presents significant challenges for protecting personal privacy. The presented approach is adaptable and scalable to cities seeking to develop data-driven policies to reduce building energy use. - Highlights: •Building energy use varies widely across metropolitan Los Angeles. •Building age, household income, home ownership rates, and land use are all correlated with energy consumption. •High-income areas use more energy per building, while lower-income areas use more energy per square-foot. •Account-level energy use data can help local governments devise conservation strategies. •Energy efficiency programs need evaluated using energy consumption data.

Analysis of a Residential Building Energy Consumption Demand Model

Directory of Open Access Journals (Sweden)

Meng Liu

2011-03-01

Full Text Available In order to estimate the energy consumption demand of residential buildings, this paper first discusses the status and shortcomings of current domestic energy consumption models. Then it proposes and develops a residential building energy consumption demand model based on a back propagation (BP neural network model. After that, taking residential buildings in Chongqing (P.R. China as an example, 16 energy consumption indicators are introduced as characteristics of the residential buildings in Chongqing. The index system of the BP neutral network prediction model is established and the multi-factorial BP neural network prediction model of Chongqing residential building energy consumption is developed using the Cshap language, based on the SQL server 2005 platform. The results obtained by applying the model in Chongqing are in good agreement with actual ones. In addition, the model provides corresponding approximate data by taking into account the potential energy structure adjustments and relevant energy policy regulations.