Tooth development in Ambystoma mexicanum: phosphatase activities, calcium accumulation and cell proliferation in the tooth-forming tissues.

Science.gov (United States)

Wistuba, Joachim; Ehmcke, Jens; Clemen, Günter

2003-06-01

Prerequisites of tooth formation, cell proliferation in the tooth-forming tissues, calcium accumulation and the enzymatic activities of alkaline (ALP) and acid phosphatases (ACP) were investigated by immunohistochemical and histochemical methods in various developmental stages of the Mexican Axolotl, Ambystoma mexicanum. During the growth of replacement teeth, the tooth-forming tissues continually recruit cells from the surrounding regions. The basal layer of the oral epithelium, the dental lamina and sometimes even the outer enamel epithelium provide cells for the differentiated inner enamel epithelium, in which the active ameloblasts are localized. The differentiating odontoblasts are derived from proliferating cells situated basally to the replacement teeth in the mesenchymal tissue. When differentiation has started and the cells have become functional, proliferative activity can no longer be observed. Calcium is accumulated close to the site of mineralization in the inner enamel epithelium and in the odontoblasts as it is in mammals, elasmobranchii and teleostei. The activities of ACP and ALP related to the mineralization of the replacement teeth are separated spatially and not sequentially as they are in mammals. However, the results indicate a similar function of these enzymatic components in relation to tooth formation and maturation of mineral deposition. Most of the substantial processes related to tooth formation reported from other vertebrates occur in a manner similar to that in Ambystoma mexicanum, but there also seem to be basic mechanisms present that are realised in a unique way in this urodele.

Analysis of enamel microhardness at various hard tissue states and depth of the microfissures

Directory of Open Access Journals (Sweden)

S. P. Yarova

2013-08-01

Full Text Available In clinical practice are often diagnosed precervical lesions: wedge-shaped defects and cracks. Long phases of the confrontation of the body as a damaging influence in the formation of thicker tissue sections of higher salinity, density and sustainability occur prior to the integrity of the enamel. Micro-hardness is one of the important characteristics of the micro-mechanical strength of the tooth-related physical and chemical changes that occur in the enamel as a result of external and internal influences. The purpose of the study was to identify possible differences in the micro-hardness of enamel, depending on the depth of fissures and pathology of hard tissues of the teeth. We investigated the longitudinal sections of 27 teeth (18 - intact, 5 - with wedge-shaped defect, 4 - with cervical caries of both jaws removed for clinical indications in patients aged 25-54 years, who were diagnosed three types of fractures (SB Ivanov, 1984. Hardness was determined in the outer, middle, inner layers of enamel in three topographical locations: in the cusp tip (cutting edge of the tooth equator and neck as in previously described technique (S. Remizov, 1965. The obtained results showed decrease in strength with micro-cracks enamel, compared with apparently intact ones, on the average 10% more in the incisal areas (tuber, less - in the equatorial zone. In intact teeth with micro-cracks and having a wedge-shaped defect the indices differed significantly depending on the depth of the defects of the cutting edge (tuber and the equator: they were the smallest in the deep type III micro-cracks (p <0.05. The opposite picture was observed in samples with cervical caries. Thus, the statistically significant difference in terms of the micro-hardness of the enamel, depending on the depth of defects has been identified only in the area of cutting edge (tuber: in samples with deep micro-cracks of enamel type III they were the highest (P = 0.017. The greatest values of

Staged Hard and Soft Tissue Reconstruction Followed by Implant Supported Restoration in the Aesthetic Zone: A Case Report.

Science.gov (United States)

Parthasarathy, Harinath; Ramachandran, Lakshmi; Tadepalli, Anupama; Ponnaiyan, Deepa

2017-04-01

Alveolar ridge deficiency is a common clinical consequence following tooth loss due to chronic periodontitis complicating ideal implant placement. Advanced hard and soft tissue augmentation procedures have been developed in the recent past with predictable clinical outcomes. A male patient presented with a Grade III mobile upper right central incisor associated with advanced bone loss and soft tissue deficit. Following extraction of tooth #11, socket augmentation was done using an autogenous cortico-cancellous block graft and subsequent soft tissue augmentation was done with palatal connective tissue graft. At the end of six months, a tapered self tapping implant fixture was placed with adequate primary stability and after eight weeks, second stage implant surgery was done with the Misch technique in order to recreate papillae and the implant was prosthetically restored. The alveolar ridge was adequately recontoured following the staged surgical protocol. The implant was well integrated at the end of 15 months. Execution of sequential surgical procedures in a highly deficient edentulous site made it possible to achieve of optimal pink and white aesthetics with stable implant supported fixed prosthesis.

Combined effect of fluoride and 2,3,7,8-tetrachlorodibenzo-p-dioxin on mouse dental hard tissue formation in vitro.

Science.gov (United States)

Salmela, Eija; Lukinmaa, Pirjo-Liisa; Partanen, Anna-Maija; Sahlberg, Carin; Alaluusua, Satu

2011-08-01

Fluoride interferes with enamel matrix secretion and mineralization and dentin mineralization. The most toxic dioxin congener, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), also impairs dental hard tissue formation and mineralization in vitro and in vivo. Our aim was to investigate in vitro whether the combined effect of sodium fluoride (NaF) and TCDD on dental hard tissue formation is potentiative. For this purpose, mandibular first and second molar tooth germs of E18 mouse embryos were cultured for 5-12 days with NaF and TCDD alone at various concentrations (2.5, 5, 10, 12.5, 15, and 20 μM and 5, 10, 12.5, and 15 nM, respectively) to determine the highest concentrations, which alone cause no or negligible effects. Morphological changes were studied from the whole tooth photographs and histological tissue sections. The concentrations found were 15 μM for NaF and 10 nM for TCDD. While at these concentrations, the effects of NaF and TCDD alone were barely detectable, the effect of simultaneous exposure on dentin and enamel formation was overt; mineralization of predentin to dentin and enamel matrix secretion and mineralization were impaired. Immunohistochemical analysis revealed that the combined exposure modified amelogenin expression by odontoblasts. Morphology of ameloblasts and the expression of amelogenin indicated that ameloblasts were still secretory. The results show that NaF and TCDD have potentiative, harmful effects on the formation of dental hard tissues. Since children can be exposed to subclinical levels of fluoride and dioxins during early childhood, coincidently with mineralization of the first permanent teeth, this finding may have clinical significance.

Chronic radiation effects on dental hard tissue (''radiation carries''). Classification and therapeutic strategies

International Nuclear Information System (INIS)

Groetz, K.A.; Brahm, R.; Al-Nawas, B.; Wagner, W.; Riesenbeck, D.; Willich, N.; Seegenschmiedt, M.H.

2001-01-01

Objectives: Since the first description of rapid destruction of dental hard tissues following head and neck radiotherapy 80 years ago, 'radiation caries' is an established clinical finding. The internationally accepted clinical evaluation score RTOG/EORTC however is lacking a classification of this frequent radiogenic alteration. Material and Methods: Medical records, data and images of radiation effects on the teeth of more than 1,500 patients, who underwent periradiotherapeutic care, were analyzed. Macroscopic alterations regarding the grade of late lesions of tooth crowns were used for a classification into 4 grades according to the RTOG/EORTC guidelines. Results: No early radiation effects were found by macroscopic inspection. In the first 90 days following radiotherapy 1/3 of the patients complained of reversible hypersensitivity, which may be related to a temporary hyperemia of the pulp. It was possible to classify radiation caries as a late radiation effect on a graded scale as known from RTOG/EORTC for other organ systems. This is a prerequisite for the integration of radiation caries into the international nomenclature of the RTOG/EORTC classification. Conclusions: The documentation of early radiation effects on dental hard tissues seems to be neglectable. On the other hand the documentation of late radiation effects has a high clinical impact. The identification of an initial lesion at the high-risk areas of the neck and incisal part of the tooth can lead to a successful therapy as a major prerequisite for orofacial rehabilitation. An internationally standardized documentation is a basis for the evaluation of the side effects of radiooncotic therapy as well as the effectiveness of protective and supportive procedures. (orig.) [de

Effects of delayed finishing/polishing on surface roughness, hardness and gloss of tooth-coloured restorative materials.

Science.gov (United States)

Yazici, A Ruya; Tuncer, Duygu; Antonson, Sibel; Onen, Alev; Kilinc, Evren

2010-01-01

The aim of this study was to investigate the effect of delayed finishing/polishing on the surface roughness, hardness and gloss of tooth-coloured restorative materials. Four different tooth-coloured restoratives: a flowable resin composite- Tetric Flow, a hybrid resin composite- Venus, a nanohybrid resin composite- Grandio, and a polyacid modified resin composite- Dyract Extra were used. 30 specimens were made for each material and randomly assigned into three groups. The first group was finished/polished immediately and the second group was finished/polished after 24 hours. The remaining 10 specimens served as control. The surface roughness of each sample was recorded using a laser profilometer. Gloss measurements were performed using a small-area glossmeter. Vickers microhardness measurements were performed from three locations on each specimen surface under 100g load and 10s dwell time. Data for surface roughness and hardness were analyzed by Kruskal Wallis test and data for gloss were subjected to one-way ANOVA and Tukey test (P gloss values were recorded under Mylar strip for all materials. While delayed finishing/polishing resulted in a significantly higher gloss compared to immediate finishing/polishing in Venus samples (P .05). The lowest hardness values were found under Mylar strip. Delayed finishing/polishing significantly increased the hardness of all materials. The effect of delayed finishing/polishing on surface roughness, gloss and hardness appears to be material dependent.

[Comparative study of expression of homeobox gene Msx-1, Msx-2 mRNA during the hard tissue formation of mouse tooth development].

Science.gov (United States)

Wang, Y; Wang, J; Gao, Y

2001-07-01

To observe and compare the expression pattern of Msx-1, Msx-2 mRNA during the different stages of hard tissue formation in the first mandibular molar of mouse and investigate the relationship between the two genes. First mandibular molar germs from 1, 3, 7 and 14-days old mouse were separated and reverse transcription-polymerase chain reaction was performed on the total RNA of them using Msx-1, Msx-2 specific primers separately. Expression of both genes were detected during the different stages of hard tissue formation in the mouse first mandibular molars, but there was some interesting differences in the quantitiy between the two genes. Msx-1 transcripts appeared at the 1 day postnatally, and increase through 3 day, 7 day, then maximally expressed at 14 days postnatally; while Msx-2 mRNA was seen and expressed maximally at the 3 days postnatally, then there was a gradual reduction at 7 days, and 14 days postnatally. The homeobox gene Msx-1, Msx-2 may play a role in the events of the hard tissue formation. The complementary expression pattern of them during the specific stage of hard tissue formation indicates that there may be some functional redundancy between them during the biomineralization.

Dental histology of Coelophysis bauri and the evolution of tooth attachment tissues in early dinosaurs.

Science.gov (United States)

Fong, Raymond K M; LeBlanc, Aaron R H; Berman, David S; Reisz, Robert R

2016-07-01

Studies of dinosaur teeth have focused primarily on external crown morphology and thus, use shed or in situ tooth crowns, and are limited to the enamel and dentine dental tissues. As a result, the full suites of periodontal tissues that attach teeth to the jaws remain poorly documented, particularly in early dinosaurs. These tissues are an integral part of the tooth and thus essential to a more complete understanding of dental anatomy, development, and evolution in dinosaurs. To identify the tooth attachment tissues in early dinosaurs, histological thin sections were prepared from the maxilla and dentary of a partial skull of the early theropod Coelophysis bauri from the Upper Triassic (Rhaetian- 209-201 Ma) Whitaker Quarry, New Mexico, USA. As one of the phylogenetically and geologically oldest dinosaurs, it is an ideal candidate for examining dental tissues near the base of the dinosaurian clade. The teeth of C. bauri exhibited a fibrous tooth attachment in which the teeth possessed five tissues: enamel, dentine, cementum, periodontal ligament (PDL), and alveolar bone. Our findings, coupled with those of more recent studies of ornithischian teeth, indicate that a tripartite periodontium, similar to that of crocodilians and mammals, is the plesiomorphic condition for dinosaurs. The occurrence of a tripartite periodontium in dinosaurs adds to the growing consensus that the presence of these tissues is the plesiomorphic condition for the major amniote clades. Furthermore, this study establishes the relative timing of tissue development and growth directions of periodontal tissues and provides the first comparative framework for future studies of dinosaur periodontal development, tooth replacement, and histology. J. Morphol. 277:916-924, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

[The elemental composition of teeth hard tissues depending on the state of the environment].

Science.gov (United States)

Suladze, N; Shishniashvili, T; Margvelashvili, V; Kobakhidze, K

2014-01-01

At present, great attention is paid to the origin of man-made micro elemental anomalies. To monitor the state of the environment and its effects on the human body, of great importance is the determination of the amount and distribution of various chemical elements in the dentin and enamel of the teeth. To determine the essential (Ca, Zn, Mn, Ni), conditionally essential (Rb, Ni, Sr) and toxic (Pb, Hg) trace elements in the mineralized tissues of the teeth and to identify the relationship between the elemental composition of the tooth structure and the state of the general and dental health depending on the state of the environment, we have examined 29 children aged 3-4 years who have carried out analysis of hard tissue of teeth (teeth used for remote medical reasons) for the maintenance of nine chemical elements. Children living in a relatively environmentally favorable conditions essential value and conditionally essential elements in the mineralized tissues of the teeth were within normal limits, and toxic elements slightly increased limits that differ from those of children living in environmentally disadvantaged areas. In particular, these essential elements were significantly reduced (except for zinc), as indicators of toxic elements - mercury and lead, increased by 12.5% and 44.5%, respectively, which is clearly reflected on the state of dental health because noted decompensated form of tooth decay. Thus, deviations in a state of general and dental health of children associated with an imbalance of macro-and microelements in the mineralized tissues of the teeth.

Rehabilitating a patient with bruxism-associated tooth tissue loss: a literature review and case report.

Science.gov (United States)

Yip, Kevin Hak-Kong; Chow, Tak W; Chu, Frederick C S

2003-01-01

Tooth tissue loss from bruxism has been demonstrated to be associated with various dental problems such as tooth sensitivity, excessive reduction of clinical crown height, and possible changes of occlusal relationship. A literature search revealed a number of treatment modalities, with an emphasis on prevention and rehabilitation with adhesive techniques. Rehabilitating a patient with bruxism-associated tooth tissue loss to an acceptable standard of oral health is clinically demanding and requires careful diagnosis and proper treatment planning. This article describes the management of excessive tooth tissue loss in a 43-year-old woman with a history of bruxism. The occlusal vertical dimension of the patient was re-established with the use of an acrylic maxillary occlusal splint, followed by resin composite build-up. Full-mouth oral rehabilitation ultimately involved constructing multiple porcelain veneers, adhesive gold onlays, ceramo-metal crowns, and fixed partial dentures.

The Effect of Diode Laser Treatment for Root Canal Disinfection on Fracture Resistance and Micro-hardness of the Tooth

International Nuclear Information System (INIS)

Elmiligy, H.H; Diab, A.H.; Sabet, N.E.; Saafan, A.M.

2014-01-01

This study evaluated the effect of diode laser treatment for root canal disinfection on fracture resistance and micro-hardness of the tooth. Sixty freshly extracted mandibular and maxillary premolars were accessed under coolant then root canals were flared up to apical preparation size 40 MFA coupled with 5.25% NaOCl as an irrigant. Teeth were divided into two groups, control group (group I) and lased group (group II) that was lased by diode laser with average power 2 w through fibrooptic into the canal 2 mm shorter than the apex. Each tooth was embedded in acrylic block, and then subjected to the fracture resistance test. Each root was then sectioned transversely and polished to record dentin Vickers hardness. Data was analysed with student t-test then with linear regression test. The Lased samples presented a significantly higher resistance to fracture than unlased samples. There was no statistically significant differences found between Vickers hardness (HV) of lased and unlased samples and there was no relation between fracture resistance and microhardness. Diode laser (980 nm) treatment had no adverse effect on dentin microhardness, also it increased the fracture resistance of dentin. Diode laser (980 nm) treatment could attain better function ability and maintenance of tooth after endodontic treatment.

Dental hard tissue drilling by longitudinally excited CO2 laser

Science.gov (United States)

Uno, Kazuyuki; Yamamoto, Takuya; Akitsu, Tetsuya; Jitsuno, Takahisa

2017-07-01

We developed a longitudinally excited CO2 laser with a long optical cavity and investigated the drilling characteristics of dental hard tissue. The CO2 laser was very simple and consisted of a 45-cm-long alumina ceramic pipe with an inner diameter of 13 mm, a pulse power supply, a step-up transformer, a storage capacitance, a spark gap, and a long optical cavity with a cavity length of 175 cm. The CO2 laser produced a short pulse that had a spike pulse with the width of 337 ns and the energy of 1.9 mJ, a pulse tail with the length of 180 μs and the energy of 37.6 mJ, and a doughnut-like beam. In the investigation, a sample was a natural drying human tooth (enamel and dentine). In a processing system, a ZnSe focusing lens with the focal length of 50 mm was used and the location of the focal plane was that of the sample surface. In 1 pulse irradiation, the drilling characteristics depended on the fluence was investigated. In the enamel and dentin drilling, the drilling depth increased with the fluence. The 1 pulse irradiation with the fluence of 21.5 J/cm2 produced the depth of 79.3 μm in the enamel drilling, and the depth of 152.7 μm in the dentin drilling. The short-pulse CO2 laser produced a deeper drilling depth at a lower fluence than long-pulse CO2 lasers in dental hard tissue processing.

Laser ablation of hard tissue: correlation between the laser beam parameters and the post-ablative tissue characteristics

Science.gov (United States)

Serafetinides, Alexandros A.; Makropoulou, Mersini I.; Khabbaz, Maruan

2003-11-01

Hard dental tissue laser applications, such as preventive treatment, laser diagnosis of caries, laser etching of enamel, laser decay removal and cavity preparation, and more recently use of the laser light to enlarge the root canal during the endodontic therapy, have been investigated for in vitro and in vivo applications. Post-ablative surface characteristics, e.g. degree of charring, cracks and other surface deformation, can be evaluated using scanning electron microscopy. The experimental data are discussed in relevance with the laser beam characteristics, e.g. pulse duration, beam profile, and the beam delivery systems employed. Techniques based on the laser illumination of the dental tissues and the subsequent evaluation of the scattered fluorescent light will be a valuable tool in early diagnosis of tooth diseases, as carious dentin or enamel. The laser induced autofluorescence signal of healthy dentin is much stronger than that of the carious dentin. However, a better understanding of the transmission patterns of laser light in teeth, for both diagnosis and therapy is needed, before the laser procedures can be used in a clinical environment.

Factors influencing patients' choice of treatment for a tooth with ...

African Journals Online (AJOL)

Dental caries is a post eruptive pathologic process of bacterial origin involving the dissolution of dental hard tissues with resultant cavity formation and it may progress to irreversible pulpitis and apical periodontitis. The options for managing involved teeth include pulp therapy and tooth extraction. Despite the high success ...

3D Bioprinting Technologies for Hard Tissue and Organ Engineering

Science.gov (United States)

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

2016-01-01

Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especially for hard organ regeneration, a series of new theories, strategies and protocols have been proposed. Some of the technologies have been applied in medical therapies with some successes. Each of the technologies has pros and cons in hard tissue and organ engineering. In this review, we summarize the advantages and disadvantages of the historical available innovative 3D bioprinting technologies for used as special tools for hard tissue and organ engineering. PMID:28773924

3D Bioprinting Technologies for Hard Tissue and Organ Engineering

Directory of Open Access Journals (Sweden)

Xiaohong Wang

2016-09-01

Full Text Available Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especially for hard organ regeneration, a series of new theories, strategies and protocols have been proposed. Some of the technologies have been applied in medical therapies with some successes. Each of the technologies has pros and cons in hard tissue and organ engineering. In this review, we summarize the advantages and disadvantages of the historical available innovative 3D bioprinting technologies for used as special tools for hard tissue and organ engineering.

3D Bioprinting Technologies for Hard Tissue and Organ Engineering.

Science.gov (United States)

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

2016-09-27

Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especially for hard organ regeneration, a series of new theories, strategies and protocols have been proposed. Some of the technologies have been applied in medical therapies with some successes. Each of the technologies has pros and cons in hard tissue and organ engineering. In this review, we summarize the advantages and disadvantages of the historical available innovative 3D bioprinting technologies for used as special tools for hard tissue and organ engineering.

Hard dental tissue minimal-invasive preparation using contemporary polymer rotating instruments and laser

Directory of Open Access Journals (Sweden)

Beloica Miloš

2014-01-01

Full Text Available Goal of contemporary dentistry is to decrease the patient’s discomfort during treatment. Dentists aim to achieve maximum with the newly developed dental materials as well as with new cavity preparation techniques in the shortest time span. Since the development of the first constructed borer (drilling machine for caries removal, the preparation techniques have considerably changed. The progress of dental materials as well as the cavity preparation techniques has led us to contemporary carbide tungsten and diamond borers that are used with obligatory water cooling. The innovation within this field represents newly developed polymer borers that can detect the difference between carious lesions and healthy tooth structure. In this way the cavity preparation may be performed without damaging dental healthy tissue. This is possible owing to their hardness which is lower than the hardness of intact dentin. Polymer borer preparation is painless with less vibration, while the increase in temperature is negligible. Lasers have been used in clinical dentistry since 1980s so it can be said that they represent a new technology. The function of lasers is based on ablation which requires water. Erbium lasers have shown the highest potential with their ability to produce effective ablation of hard dental tissues. Laser application in dentistry requires special training as well as some protective measures. Laser advantages, compared to traditional preparation techniques, involve the absence of vibration, painless preparation, possibility of preparation without anesthetic and easier patient’s adjustment to dental intervention which is of importance, especially in pediatric dentistry. [Projekat Ministarstva nauke Republike Srbije, br. 46009

Kappa-splints application for the treatment of pathological dental hard tissues abrasion in combination with dentition defects and dentition deformations

Directory of Open Access Journals (Sweden)

Svitlana Petrishin

2017-03-01

2. After studying the movements of conventional hinge axis in articulate heads of TMJ with the help of condylograph «Cadiax Compact» and eliminating the symptoms of stress in masticatory muscles of the patients with occlusive disorders at pathological dental hard tissues abrasion, it is the gradual application of a kappa-splints set, made of hard transparent plates of Ercodent Ercodur material (Germany with a thickness of 1.0 to 5.0 mm, which allows prevention of further tooth wear, normalization of occlusive correlations of the jaws, separating a bite with optimum thickness throughout the dentition, thus the lower jaw takes a position at which the state of functional equilibrium of the entire dentition is restored.

Overview of Tooth Disorders

Science.gov (United States)

... teeth using a thin resin cement. Bleaching, or tooth whitening, is a process used by dentists to lighten ... following? Damage to only the hard outer surface (enamel) of the tooth An incomplete fracture of a ...

Effect of conventional and sugar free pediatric syrup formulations on primary tooth enamel hardness: An in vitro study

Directory of Open Access Journals (Sweden)

Gaurao Vasant Mali

2015-01-01

Full Text Available Objectives: To assess and compare the effect of conventional and sugar free pediatric syrup formulations on primary tooth enamel hardness over a period of 14 days. Materials and Methods: An in vitro study was done on 40 noncarious deciduous teeth. 10 teeth in each group were dipped in 4 pediatric medicinal syrups (1 sugarfree and 3 conventional for 1 min thrice daily for 14 days and the enamel surface micro hardness was checked at baseline, 7 th day and 14 th day by Vickers hardness testing machine. The pH, titratable acidity and buffering capacity of the syrups were assessed. Results: The pH of syrups were above critical pH for demineralization of the tooth but tiratable acidity and buffering capacity differed. ANOVA test indicated that the reduction in mean micro hardness was maximum in Group D (Conventional Analgesic syrup and least in Group A (Sugarfree cough syrup on 7 th and 14 th day. On intergroup comparison there was no difference (P > 0.05 in micro hardness between Group B (Conventional Cough syrup and Group C (Conventional Antibiotic. However, highly significant (P < 0.01 difference between the either pair of Group B with Group D, and Group C with Group D on 14 th day. The percentage reduction in micro hardness on 14 th day was maximum for Group D (24.4 ± 2.2 and minimum for Group A (14.0 ± 1.3 which was statistically significant (P < 0.01. Conclusion: Sugar free pediatric medicines can be effective in reducing dental erosion and efforts should be made to incorporate sugar substitutes in formulation of pediatric medicines.

3D Bioprinting Technologies for Hard Tissue and Organ Engineering

OpenAIRE

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

2016-01-01

Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especial...

Multivariate image analysis of laser-induced photothermal imaging used for detection of caries tooth

Science.gov (United States)

El-Sherif, Ashraf F.; Abdel Aziz, Wessam M.; El-Sharkawy, Yasser H.

2010-08-01

Time-resolved photothermal imaging has been investigated to characterize tooth for the purpose of discriminating between normal and caries areas of the hard tissue using thermal camera. Ultrasonic thermoelastic waves were generated in hard tissue by the absorption of fiber-coupled Q-switched Nd:YAG laser pulses operating at 1064 nm in conjunction with a laser-induced photothermal technique used to detect the thermal radiation waves for diagnosis of human tooth. The concepts behind the use of photo-thermal techniques for off-line detection of caries tooth features were presented by our group in earlier work. This paper illustrates the application of multivariate image analysis (MIA) techniques to detect the presence of caries tooth. MIA is used to rapidly detect the presence and quantity of common caries tooth features as they scanned by the high resolution color (RGB) thermal cameras. Multivariate principal component analysis is used to decompose the acquired three-channel tooth images into a two dimensional principal components (PC) space. Masking score point clusters in the score space and highlighting corresponding pixels in the image space of the two dominant PCs enables isolation of caries defect pixels based on contrast and color information. The technique provides a qualitative result that can be used for early stage caries tooth detection. The proposed technique can potentially be used on-line or real-time resolved to prescreen the existence of caries through vision based systems like real-time thermal camera. Experimental results on the large number of extracted teeth as well as one of the thermal image panoramas of the human teeth voltanteer are investigated and presented.

SEM evaluation of the morphological changes in hard dental tissues prepared by Er: YAG laser and rotary instruments

Directory of Open Access Journals (Sweden)

Tomov Georgi

2010-09-01

Full Text Available Effective ablation of dental hard tissues by means of the erbium:yttrium-aluminum garnet (Er: YAG laser has been reported recently, and its application to caries removal and cavity preparation has been expected. However, few studies have investigated the morphological changes in hard dental tissues after Er: YAG laser caries treatment. In the present study the morphological changes in hard dental tissues after Er: YAG laser caries ablation in vitro was compared with that of conventional mechanical treatment. Thirty extracted human teeth with caries were used. Ten tooth was treated with the Er: YAG laser, and the other was treated with a conventional steel and diamond burs. Laser treatment was performed by means of a non-contact irradiation modes with cooling water spray, with a new Er: YAG laser (LiteTouch. Conventional bur treatment was conducted by means of a low-speed micromotor and air turbine with water cooling. Scanning electron microscope (SEM observations were performed for each treatment. The Er: YAG laser ablated carious dentin effectively with minimal thermal damage to the surrounding intact dentin, and removed infected and softened carious dentin to the same degree as the burtreatment. In addition, a lower degree of vibration was noted with the Er: YAG laser treatment. The SEM examination revealed characteristic micro-irregularities of the lased dentin and enamel surfaces with potential benefits for adhesive restorations. Our results show that the Er: YAG laser is promising as a new technical modality for caries treatment

The prevalence, pattern and clinical presentation of developmental dental hard-tissue anomalies in children with primary and mix dentition from Ile-Ife, Nigeria.

Science.gov (United States)

Temilola, Dada Oluwaseyi; Folayan, Morenike Oluwatoyin; Fatusi, Olawunmi; Chukwumah, Nneka Maureen; Onyejaka, Nneka; Oziegbe, Elizabeth; Oyedele, Titus; Kolawole, Kikelomo Adebanke; Agbaje, Hakeem

2014-10-16

The study of dental anomalies is important because it generates information that is important for both the anthropological and clinical management of patients. The objective of this study is to determine the prevalence and pattern of presentation of dental hard-tissue developmental anomalies in the mix dentition of children residing in Ile-Ife, a suburban region of Nigeria. Information on age, sex and socioeconomic status was collected from 1,036 children aged four months to 12 years through a household survey. Clinical examination was conducted to assess the presence of dental anomalies. Associations between age, sex, socioeconomic status, prevalence, and pattern of presentation of the developmental hard-tissue dental anomalies were determined. Two hundred and seventy six (26.6%) children had dental anomalies. Of these, 23.8% had one anomaly, 2.5% had two anomalies, and 0.3% had more than two anomalies. Of the children with anomalies, 49.3%were male, 50.7%were female, and 47.8%, 28.6% and 23.6% were children from low, middle and high socioeconomic classes, respectively. More anomalies were seen in permanent than primary dentition. Anomalies of tooth structure were most prevalent (16.1%); anomalies which affect tooth number were least prevalent (1.3%). Dens evaginatus, peg-shaped lateral, macrodontia, and talon cusp were more prevalent in the permanent dentition, and dens evaginatus peg-shaped lateral and macrodontia were more prevalent in the maxilla. There were significantly more macrodontia anomalies in males and in children of high socioeconomic status. This large survey of dental hard-tissue anomalies found in the primary dentition and mixed dentition of children in Nigeria provides anthropological and clinical data that may aid the detection and management of dental problems of children in Nigeria.

Age-related changes of dental pulp tissue after experimental tooth movement in rats

Directory of Open Access Journals (Sweden)

Martina Von Böhl

2016-01-01

Full Text Available It is generally accepted that the effect of orthodontic tooth movement on the dental pulp in adolescents is reversible and that it has no long-lasting effect on pulpal physiology. However, it is not clear yet if the same conclusion is also valid for adult subjects. Thus, in two groups of rats, aged 6 and 40 weeks respectively, 3 molars at one side of the maxilla were moved together in a mesial direction with a standardized orthodontic appliance delivering a force of 10 cN. The contralateral side served as a control. Parasagittal histological sections were prepared after tooth movement for 1, 2, 4, 8, and 12 weeks. The pulp tissue was characterized for the different groups, with special emphasis on cell density, inflammatory cells, vascularity, and odontoblasts. Dimensions of dentin and the pulpal horns was determined and related with the duration of orthodontic force application and age ware evaluated. We found that neither in young nor in adult rats, force application led to long-lasting or irreversible changes in pulpal tissues. Dimensional variables showed significant age-related changes. In conclusion, orthodontic tooth movement per se has no long-lasting or irreversible effect on pulpal tissues, neither in the young nor in the adult animals.

Clinical, radiographic, and histological observation of a human immature permanent tooth with chronic apical abscess after revitalization treatment.

Science.gov (United States)

Shimizu, Emi; Ricucci, Domenico; Albert, Jeffrey; Alobaid, Adel S; Gibbs, Jennifer L; Huang, George T-J; Lin, Louis M

2013-08-01

Revitalization procedures have been widely used for the treatment of immature permanent teeth with apical periodontitis. The treatment procedures appear to be capable of encouraging continued root development and thickening of the canal walls. The nature of tissues formed in the canal space and at the root apex after revitalization has been shown histologically in several animal studies; similar studies in humans were recently reported. A 9-year-old boy had a traumatic injury to his upper anterior teeth. Tooth #9 suffered a complicated crown fracture with a pulp exposure, which was restored with a composite resin. The tooth developed a chronic apical abscess. Revitalization procedures were performed on tooth #9 because it was an immature permanent tooth with an open apex and thin canal walls. Twenty-six months after revitalization, the tooth had a horizontal crown fracture at the cervical level and could not be restored. The tooth was extracted and processed for routine histological and immunohistochemical examination to identify the nature of tissues formed in the canal space. Clinically and radiographically, the revitalization of the present case was successful because of the absence of signs and symptoms and the resolution of periapical lesion as well as thickening of the canal walls and continued root development. The tissue formed in the canal was well-mineralized cementum- or bone-like tissue identified by routine histology and immunohistochemistry. No pulp-like tissue characterized by the presence of polarized odontoblast-like cells aligning dentin-like hard tissue was observed. The tissues formed in the canal of revitalized human tooth are similar to cementum- or bone-like tissue and fibrous connective tissue. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Dental hard tissue modification and removal using sealed TEA lasers operating at λ=9.6 and 10.6 μm

Science.gov (United States)

Fried, Daniel; Murray, Michael W.; Featherstone, John D. B.; Akrivou, Maria; Dickenson, Kevin M.; Duhn, Clifford W.; Ojeda, Orlando P.

1999-05-01

Pulsed CO2 lasers have been shown to be effective for both removal and modification of dental hard tissue for the treatment of dental caries. In this study, sealed TEA laser systems optimally tuned to the highly absorbed 9.6 μm wavelength were investigated for application on dental hard tissue. Conventional TEA lasers produce a laser pulse wit a 100-200 ns gain switched spike followed by a long tail of about 1-4 μs in duration. the pulse duration is well matched to the 1-2 μs thermal relaxation time of the deposited laser energy at 9.6 μm and effectively heats the enamel to temperatures required for surface modification for caries prevention at absorbed fluences of less than 0.5 J/cm2. Thus, the heat deposition in the tooth and the corresponding risk, of pulpal necrosis form excessive heat accumulation is minimized. At higher fluences the high peak power of the gain-switched spike rapidly initiates a plasma that markedly reduces the ablation rate and efficiency, severely limiting applicability for hard tissue ablation. By slightly stretching the pulse to reduce the energy distributed in the initial 100-200 ns of the laser pulse, the plasma threshold can be raised sufficiently to increase the ablation rate by an order of magnitude. This results in a practical and efficient CO2 laser system for caries ablation and surface modification.

Effect of high-frequency near-infrared diode laser irradiation on periodontal tissues during experimental tooth movement in rats.

Science.gov (United States)

Gunji, Hidemi; Kunimatsu, Ryo; Tsuka, Yuji; Yoshimi, Yuki; Sumi, Keisuke; Awada, Tetsuya; Nakajima, Kengo; Kimura, Aya; Hiraki, Tomoka; Hirose, Naoto; Yanoshita, Makoto; Tanimoto, Kotaro

2018-02-05

Tooth movement during orthodontic treatment is associated with bone neoplasticity and bone resorption on the tension and pressure sides. Previous clinical studies have suggested that low-power laser irradiation can accelerate tooth movement during orthodontic treatment, although the underlying mechanism remains unclear. In this study, we used a high-frequency near-infrared diode laser that generates less heat and examined the histologic changes in periodontal tissue during experimental tooth movement with laser irradiation. A nickel-titanium closed coil was mounted between the maxillary left side first molar and incisor of rats to model experimental tooth movement. The laser-irradiation and the control groups were set, and the amount of movement of the first molar on 7th and 14th days after the start of pulling of the first molar tooth on the maxillary left was measured by three-dimensional analysis of µCT. After tooth movement, tissue samples from the mesial and tension sides were collected, and successive horizontal sections were prepared and examined using hematoxylin-eosin and TRAP staining and immunohistochemical staining for RANKL, OPG, ALP, and proliferating cell nuclear antigen (PCNA). Changes in tissue temperature following laser irradiation were also examined. Laser irradiation significantly increased tooth movement compared with non-irradiated controls. Histologic staining of the pressure-side mesial root in laser-irradiated rats revealed enhanced RANKL expression and increased numbers of TRAP-positive cells compared with controls. By contrast, on the tension side, laser irradiation led to increased expression of ALP and PCNA. These data indicate that high-frequency near-infrared diode laser irradiation on the pressure side upregulates RANKL expression and accelerates osteoclast differentiation, facilitating bone resorption, whereas bone formation is induced on the tension side. This study demonstrates that high-frequency near-infrared diode laser

Exogenous mineralization of hard tissues using photo-absorptive minerals and femto-second lasers; the case of dental enamel.

Science.gov (United States)

Anastasiou, A D; Strafford, S; Thomson, C L; Gardy, J; Edwards, T J; Malinowski, M; Hussain, S A; Metzger, N K; Hassanpour, A; Brown, C T A; Brown, A P; Duggal, M S; Jha, A

2018-04-15

-IR wavelength and the formation of a new layer to substitute the removed material. The new layer is evaluated through simulated brushing trials and nano-indentation. From the results we can conclude that is more acid resistant than natural enamel while, its mechanical properties are superior to that of current restorative materials. To the best of our knowledge this is the first time that someone demonstrated, laser sintering and bonding of calcium phosphate biomaterials on hard tissues. Although we here we discuss the case of dental enamel, similar approach can be adopted for other hard tissues, leading to new strategies for the fixation of bone/tooth defects. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

Dental hard tissue modification and removal using sealed transverse excited atmospheric-pressure lasers operating at lambda=9.6 and 10.6 um

Science.gov (United States)

Fried, Daniel; Ragadio, Jerome N.; Akrivou, Maria; Featherstone, John D.; Murray, Michael W.; Dickenson, Kevin M.

2001-04-01

Pulsed CO2 lasers have been shown to be effective for both removal and modification of dental hard tissue for the treatment of dental caries. In this study, sealed transverse excited atmospheric pressure (TEA) laser systems optimally tuned to the highly absorbed 9.6 micrometers wavelength were investigated for application on dental hard tissue. Conventional TEA lasers produce an initial high energy spike at the beginning of the laser pulse of submicrosecond duration followed by a long tail of about 1 - 4 microsecond(s) . The pulse duration is well matched to the 1 - 2 microsecond(s) thermal relaxation time of the deposited laser energy at 9.6 micrometers and effectively heats the enamel to the temperatures required for surface modification at absorbed fluences of less than 0.5 J/cm2. Thus, the heat deposition in the tooth and the corresponding risk of pulpal necrosis from excessive heat accumulation is minimized. At higher fluences, the high peak power of the laser pulse rapidly initiates a plasma that markedly reduces the ablation rate and efficiency, severely limiting applicability for hard tissue ablation. By lengthening the laser pulse to reduce the energy distributed in the initial high energy spike, the plasma threshold can be raised sufficiently to increase the ablation rate by an order of magnitude. This results in a practical and efficient CO2 laser system for caries ablation and surface modification.

Hard and soft tissue correlations in facial profiles: a canonical correlation study

Directory of Open Access Journals (Sweden)

Shamlan MA

2015-01-01

Full Text Available Manal A Shamlan,1 Abdullah M Aldrees2 1Faculty of Dentistry, King Abdulaziz University, Jeddah, 2Division of Orthodontics, Department of Pediatric Dentistry and Orthodontics, College of Dentistry, King Saud University, Riyadh, Saudi Arabia Background: The purpose of this study was to analyze the relationship between facial hard and soft tissues in normal Saudi individuals by studying the canonical correlation between specific hard tissue landmarks and their corresponding soft tissue landmarks. Methods: A retrospective, cross-sectional study was designed, with a sample size of 60 Saudi adults (30 males and 30 females who had a class I skeletal and dental relationship and normal occlusion. Lateral cephalometric radiographs of the study sample were investigated using a series of 29 linear and angular measurements of hard and soft tissue features. The measurements were calculated electronically using Dolphin® software, and the data were analyzed using canonical correlation. Results: Eighty-four percent of the variation in the soft tissue was explained by the variation in hard tissue. Conclusion: The position of the upper and lower incisors and inclination of the lower incisors influence upper lip length and lower lip position. The inclination of the upper incisors is associated with lower lip length. Keywords: facial profile, hard tissue, soft tissue, canonical correlation

Full Contoured Tooth-Implant Supported 3-Pointic All-Ceramic Denture During Occlusal Load Transfer in Lateral Region

Directory of Open Access Journals (Sweden)

Żmudzki J.

2016-06-01

Full Text Available Implant and a tooth supported dentures are avoided by dentists because of uneven distribution of occlusal loads between a stiffer implant and a more pliable tooth. The hypothesis was that a 3-point all-ceramic bridge supported on a natural second premolar tooth and a two-pieces typical implant bears safely mastication loads. The finite element analysis showed that the implant splinted by all-ceramic zirconium bridge with the second premolar was safe under lateral mastication load, but there was found an overload at wide zone of bone tissue around the implant under the load of 800 N. The patients can safely masticate, but comminution of hard food should be avoided and they should be instructed that after such an indiscretion they need to contact a dental professional, because, in spite of integrity of the prosthesis, the bone tissue around the implant may fail and there is a hazard of intrusion of the tooth.

Improved classification and visualization of healthy and pathological hard dental tissues by modeling specular reflections in NIR hyperspectral images

Science.gov (United States)

Usenik, Peter; Bürmen, Miran; Fidler, Aleš; Pernuš, Franjo; Likar, Boštjan

2012-03-01

Despite major improvements in dental healthcare and technology, dental caries remains one of the most prevalent chronic diseases of modern society. The initial stages of dental caries are characterized by demineralization of enamel crystals, commonly known as white spots, which are difficult to diagnose. Near-infrared (NIR) hyperspectral imaging is a new promising technique for early detection of demineralization which can classify healthy and pathological dental tissues. However, due to non-ideal illumination of the tooth surface the hyperspectral images can exhibit specular reflections, in particular around the edges and the ridges of the teeth. These reflections significantly affect the performance of automated classification and visualization methods. Cross polarized imaging setup can effectively remove the specular reflections, however is due to the complexity and other imaging setup limitations not always possible. In this paper, we propose an alternative approach based on modeling the specular reflections of hard dental tissues, which significantly improves the classification accuracy in the presence of specular reflections. The method was evaluated on five extracted human teeth with corresponding gold standard for 6 different healthy and pathological hard dental tissues including enamel, dentin, calculus, dentin caries, enamel caries and demineralized regions. Principal component analysis (PCA) was used for multivariate local modeling of healthy and pathological dental tissues. The classification was performed by employing multiple discriminant analysis. Based on the obtained results we believe the proposed method can be considered as an effective alternative to the complex cross polarized imaging setups.

Clinical management of a fused upper premolar with supernumerary tooth: a case report

Directory of Open Access Journals (Sweden)

Kyu-Min Cho

2014-11-01

Full Text Available n dentistry, the term 'fusion' is used to describe a developmental disorder of dental hard tissues. In the permanent dentition, fusion of a normal tooth and a supernumerary tooth usually involves the incisors or canines. However, a few cases of fusion involving premolars have also been reported to date. We present a rare case in which fusion of the maxillary left second premolar and a supernumerary tooth in a 13-year-old girl was diagnosed using cone beam computed tomography (CBCT, Alphard-3030, Asahi Roentgen Ind. Co., Ltd.. The tooth was bicuspidized after routine nonsurgical root canal treatment, and the separated teeth underwent appropriate restoration procedures. The second premolar and supernumerary tooth remained asymptomatic without any signs of inflammation after a follow-up period of 9 years. Identification of anatomical anomalies is important for treatment in cases involving fusion with supernumerary tooth, and therefore the microscopic examinations and CBCT are essential for the diagnosis. Fused teeth can be effectively managed by the comprehensive treatment which includes both endodontic and periodontal procedures.

Stem cells for tooth engineering

Directory of Open Access Journals (Sweden)

G Bluteau

2008-07-01

Full Text Available Tooth development results from sequential and reciprocal interactions between the oral epithelium and the underlying neural crest-derived mesenchyme. The generation of dental structures and/or entire teeth in the laboratory depends upon the manipulation of stem cells and requires a synergy of all cellular and molecular events that finally lead to the formation of tooth-specific hard tissues, dentin and enamel. Although mesenchymal stem cells from different origins have been extensively studied in their capacity to form dentin in vitro, information is not yet available concerning the use of epithelial stem cells. The odontogenic potential resides in the oral epithelium and thus epithelial stem cells are necessary for both the initiation of tooth formation and enamel matrix production. This review focuses on the different sources of stem cells that have been used for making teeth in vitro and their relative efficiency. Embryonic, post-natal or even adult stem cells were assessed and proved to possess an enormous regenerative potential, but their application in dental practice is still problematic and limited due to various parameters that are not yet under control such as the high risk of rejection, cell behaviour, long tooth eruption period, appropriate crown morphology and suitable colour. Nevertheless, the development of biological approaches for dental reconstruction using stem cells is promising and remains one of the greatest challenges in the dental field for the years to come.

Autotransplantation donor tooth site harvesting using piezosurgery

OpenAIRE

Ylikontiola, Leena P.; S?ndor, George K.

2016-01-01

Abstract Background: The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. Methods: A piezosurgical handpiece and its ...

Concentrations of {sup 90}Sr in the tooth tissues 60 years after intake: results of TL measurements and applications for Techa River dosimetry

Energy Technology Data Exchange (ETDEWEB)

Shishkina, E.A.; Tolstykh, E.I.; Volchkova, A.Yu.; Degteva, M.O. [Urals Research Center for Radiation Medicine, Chelyabinsk (Russian Federation); Verdi, E. [German Research Centre for Environmental Health, Helmholtz Zentrum Muenchen, Neuherberg (Germany); Veronese, I. [Universita degli Studi di Milano, Dipartimento di Fisica, Milan (Italy); INFN, Rome (Italy); El-Faramawy, N.A. [German Research Centre for Environmental Health, Helmholtz Zentrum Muenchen, Neuherberg (Germany); Ain Shams University, Department of Physics, Faculty of Science, Cairo (Egypt); Goeksu, H.Y. [German Research Centre for Environmental Health, Helmholtz Zentrum Muenchen, Neuherberg (Germany); Adiyaman University, Department of Physics, Faculty of Science and Art, Adiyaman (Turkey)

2014-03-15

This article focuses on the study of {sup 90}Sr in the tooth tissues of Techa riverside residents 60 years after intake. The Techa River was contaminated by radioactive wastes in the 1950s. Contamination of the river system, including water, bottom sediment, floodplain soil, and grass, depended on the distance from the source of releases. Therefore, the average {sup 90}Sr intake was different in different settlements located downstream the river. An additional factor influencing {sup 90}Sr accumulation in the teeth is the rate of tissue mineralization at the time of intake which depended on the donor's age at the time of releases. Measurements of {sup 90}Sr concentration in various dental tissues (enamel, crown, and root dentin) of 166 teeth were performed about 60 years after the main intake using the method of thermoluminescence passive beta detection. The paper presents the current levels of tooth tissue contamination, and the tooth-to-tooth variability of {sup 90}Sr concentration in tooth tissues was assessed for the tissues which were matured at the time of massive liquid radioactive waste releases into the Techa River. A model describing the expected levels of {sup 90}Sr in matured dental tissues depending on age and intake has been elaborated for the population under study. The results obtained will be used for calculation of internal dose in enamel and for interpretation of tooth doses measured by means of the electron paramagnetic resonance method, among the population of the Techa River region. (orig.)

Kekerasan mikro enamel gigi permanen muda setelah aplikasi bahan pemutih gigi dan pasta remineralisasi (Enamel micro hardness of young permanent tooth after bleaching and remineralization paste application

Directory of Open Access Journals (Sweden)

Budianto Liwang

2014-12-01

Full Text Available Background: Studies showed that bleaching agent had demineralization effect to enamel, and encourage use of remineralization paste after bleaching treatment especially in young permanent tooth which in post-eruptive enamel maturation. Purpose: The study ere aimed to determine the bleaching agent effect on enamel surface micro hardness, and to determine the effect of remineralization paste application on enamel surface micro hardness of young permanent tooth after bleaching treatment. Methods: Fourteen young permanent teeth were placed in a block of resin with a window on the buccal surface enamel. The initial enamel surface hardness was measured using Microvickers Hardness Tester. Then the application of hydrogen peroxide bleaching materials 30% was done three times for 15 minutes and followed by surface hardness of enamel measurement. Samples were divided into 2 groups; the first group was applied paste of Hydroxy apatite + NaF 1450ppm , and the second group was applied paste of CPP–ACP + NaF 900ppm. Each paste was applied for 30 minutes for 7 days, then the enamel surface hardness of samples were measured. Results: The enamel surface micro hardness decreased after bleaching from 333.09 ± 10.49 VHN to 299.15±5.70 VHN. Micro hardness after application of Hidroxy apatite + NaF 1450ppm was 316.61±5.87 VHN and after application of CPP-ACP + NaF 900ppm was 319.94±3.25 VHN, however the micro hardness still lower than initial micro hardness. Conclusion: Tooth bleaching agent caused a decrease of enamel surface micro hardness in young permanent tooth. The use of remineralization paste enabled to increase the enamel surface micro hardness young permanent tooth.Latar belakang: Penelitian-penelitian sebelumnya menunjukkan bahwa produk pemutih gigi memiliki efek demineralisasi enamel gigi, dan mendorong penggunaan pasta remineralisasi setelah pemutihan gigi terutama di gigi muda permanen yang enamelnya masih dalam proses maturasi pasca-erupsi. Tujuan

Water hardness and cardiovascular disease. Elements in water and human tissues

Energy Technology Data Exchange (ETDEWEB)

Sharrett, A R

1977-05-01

The hypothesis that the hardness of drinking water has a causal role in the development of cardiovascular disease will be strengthened if it can be demonstrated that elements in drinking water find their way into human tissues in significant amounts. For biologically important metals, the evidence is reviewed for a relationship of tissue levels to levels in drinking water. Hard water can contribute significantly to daily magnesium intake. Residents of hard-water areas may have raised levels of magnesium in coronary arteries, bone, and myocardial tissue. Lead levels in bone and in blood have been shown to be elevated in individuals living in homes with lead plumbing and soft water. Cadmium intake from water is probably small compared to that from other sources, and there is no convincing evidence of alteration in human tissue levels via drinking water cadmium. Human zinc and copper tissue levels are of interest but have not been adequately studied in relation to drinking water levels.

Investigation of EPR signals on tooth enamel

Energy Technology Data Exchange (ETDEWEB)

Pavlenko, A; Mironova-Ulmane, N; Polakov, M; Riekstina, D [Institute of Solid State Physics, University of Latvia, Riga (Latvia)

2007-12-15

Calcified tissues are involved in continues metabolic process in human organism exchanging a number of chemical elements with environment. The rate of biochemical reactions is tissue dependent and the slowest one at the tooth enamel, the most mineralized tissue of human organism. The long time stability and unique chemical composition make tooth enamel suitable for number of application. The assessment of individual radiation dose by Electron Paramagnetic Resonance (EPR) and evaluations of elemental composition by Instrumentation Neutron Activation Analysis (INAA) are the well known procedures where properties of tooth enamel intensively used. The current work is focused on investigation of EPR signals and determination of chemical composition on several teeth samples having different origin. The EPR spectra and INAA element content of milk tooth, caries tooth, and paradantose tooth have been compared to each other. The results showed that the intensity of EPR signal is much higher for the caries tooth than the for paradantose tooth that is in agreement with depleted Ca content.

Moessbauer Studies of Stannous Fluoride Reactivity with Synthetic Tooth Enamel - A Model for the Tooth Cavity Protection Actions of Novel Dentifrices

International Nuclear Information System (INIS)

Denes, Georges; Muntasar, Abdualhafeed; Kozak, Kathy M.; Baig, Arif A.; White, Donald J.

2002-01-01

SnF 2 is an important toothpaste ingredient, added for the provision of clinical efficacy for hard and soft tissue diseases and in breath protection. Synthetic calcium hydroxyapatite powders were exposed to liquid supernates (25 w/w% toothpaste water slurries, centrifuged) of Crest Gum Care (registered) (SnF 2 ) dentifrice. One-minute treatments were followed by 3x water washing, centrifugation and lyophilization. Post treatment, powders were analyzed by Moessbauer spectroscopy with 0.5-1 gram of treated apatite powder. Results show that tooth mineral stannous fluoride interactions include: (1) formation of surface reaction products with both Sn(II) and Sn(IV) oxidation states; (2) Sn-F binding on mineral surfaces with no evidence of SnO. The surface binding is, however, not pure Sn-F but contains contributions of other ligands, probably oxygens from surface phosphates or hydroxyl groups. Results also suggest that surface reacted stannous tin is oxidized with time, even when bound as a layer on the tooth surface. This study demonstrates for the first time the presence of Sn-F on tooth enamel post treatment and the contribution of passivation to long term stannous chemistry on tooth surfaces. The study also illustrates the practical applications of the Moessbauer technique.

Monte Carlo modeling of human tooth optical coherence tomography imaging

International Nuclear Information System (INIS)

Shi, Boya; Meng, Zhuo; Wang, Longzhi; Liu, Tiegen

2013-01-01

We present a Monte Carlo model for optical coherence tomography (OCT) imaging of human tooth. The model is implemented by combining the simulation of a Gaussian beam with simulation for photon propagation in a two-layer human tooth model with non-parallel surfaces through a Monte Carlo method. The geometry and the optical parameters of the human tooth model are chosen on the basis of the experimental OCT images. The results show that the simulated OCT images are qualitatively consistent with the experimental ones. Using the model, we demonstrate the following: firstly, two types of photons contribute to the information of morphological features and noise in the OCT image of a human tooth, respectively. Secondly, the critical imaging depth of the tooth model is obtained, and it is found to decrease significantly with increasing mineral loss, simulated as different enamel scattering coefficients. Finally, the best focus position is located below and close to the dental surface by analysis of the effect of focus positions on the OCT signal and critical imaging depth. We anticipate that this modeling will become a powerful and accurate tool for a preliminary numerical study of the OCT technique on diseases of dental hard tissue in human teeth. (paper)

Neanderthal and Denisova tooth protein variants in present-day humans.

Directory of Open Access Journals (Sweden)

Clément Zanolli

Full Text Available Environment parameters, diet and genetic factors interact to shape tooth morphostructure. In the human lineage, archaic and modern hominins show differences in dental traits, including enamel thickness, but variability also exists among living populations. Several polymorphisms, in particular in the non-collagenous extracellular matrix proteins of the tooth hard tissues, like enamelin, are involved in dental structure variation and defects and may be associated with dental disorders or susceptibility to caries. To gain insights into the relationships between tooth protein polymorphisms and dental structural morphology and defects, we searched for non-synonymous polymorphisms in tooth proteins from Neanderthal and Denisova hominins. The objective was to identify archaic-specific missense variants that may explain the dental morphostructural variability between extinct and modern humans, and to explore their putative impact on present-day dental phenotypes. Thirteen non-collagenous extracellular matrix proteins specific to hard dental tissues have been selected, searched in the publicly available sequence databases of Neanderthal and Denisova individuals and compared with modern human genome data. A total of 16 non-synonymous polymorphisms were identified in 6 proteins (ameloblastin, amelotin, cementum protein 1, dentin matrix acidic phosphoprotein 1, enamelin and matrix Gla protein. Most of them are encoded by dentin and enamel genes located on chromosome 4, previously reported to show signs of archaic introgression within Africa. Among the variants shared with modern humans, two are ancestral (common with apes and one is the derived enamelin major variant, T648I (rs7671281, associated with a thinner enamel and specific to the Homo lineage. All the others are specific to Neanderthals and Denisova, and are found at a very low frequency in modern Africans or East and South Asians, suggesting that they may be related to particular dental traits or

Association between traditional oral hygiene methods with tooth wear, gingival bleeding, and recession: A descriptive cross-sectional study.

Science.gov (United States)

Shah, Naseem; Mathur, Vijay Prakash; Jain, Veena; Logani, Ajay

2018-01-01

Oral hygiene maintenance is crucial for prevention of various oral diseases. Oral hygiene practices across the country vary largely and people in peri-urban and rural areas use traditional methods of oral hygiene like powders, bark, oil and salt etc. Their effect on oral soft and hard tissues need to be studied to understand their beneficial and/ or harmful effects on maintenance of oral hygiene and prevention or causation of oral diseases. This study aimed to assess the plaque-cleaning efficacy, gingival bleeding, recession and tooth wear with different traditional oral hygiene methods as compared to use of toothpaste-toothbrush, the most accepted method of oral hygiene practice. Hospital based cross sectional analytical study. Results: Total 1062 traditional oral hygiene method users were compared with same number of toothpaste-brush users. The maximum number in the former group used tooth powder (76%) as compared to other indigenous methods, such as use of bark of trees etc and out of tooth powder users; almost 75% reported using red toothpowder. The plaque scores and gingival bleeding & recession were found to be more in traditional oral hygiene method users. The toothwear was also more severe among the toothpowder users. Traditional methods were found to be inferior in plaque control as was documented by increased bleeding and gingival recession. Its effect on hard tissues of teeth was very damaging with higher tooth wear scores on all surfaces.

Imaging the hard/soft tissue interface.

Science.gov (United States)

Bannerman, Alistair; Paxton, Jennifer Z; Grover, Liam M

2014-03-01

Interfaces between different tissues play an essential role in the biomechanics of native tissues and their recapitulation is now recognized as critical to function. As a consequence, imaging the hard/soft tissue interface has become increasingly important in the area of tissue engineering. Particularly as several biotechnology based products have made it onto the market or are close to human trials and an understanding of their function and development is essential. A range of imaging modalities have been developed that allow a wealth of information on the morphological and physical properties of samples to be obtained non-destructively in vivo or via destructive means. This review summarizes the use of a selection of imaging modalities on interfaces to date considering the strengths and weaknesses of each. We will also consider techniques which have not yet been utilized to their full potential or are likely to play a role in future work in the area.

Hard tissue deposition in dental pulp canal by {alpha}-tricalcium phosphate cement

Energy Technology Data Exchange (ETDEWEB)

Yoshikawa, M.; Toda, T. [Osaka Dental Univ. (Japan). Dept. of Endodontics; Mandai, Y. [Bio-Chemical Lab. of Nitta Gelatin Inc., Yao (Japan); Oonishi, H. [Osaka Minami National Hospital, Kawachi (Japan). Dept. of Orthopaedic Surgery

2001-07-01

Canal closure by hard tissue proliferation in the pulp canal and/or apical foramen is the most ideal healing after pulp removal. Generally, Ca(OH){sub 2} may induce secondary dentine or dentine-bridge on the amputated pulp surface. However, Ca(OH){sub 2} shows strong alkalinity and may cause severe inflammatory responses in the residual pulp. Moreover, completely formed dentine-bridge at the orifice will disturb further treatment of residual pulp because of the difficulty in localizing the pathway. The purpose of this study was to see hard tissue induction using newly developed {alpha}-tricalcium phosphate cement and to recognize the morphological difference of hard tissue from that of Ca(OH){sub 2}. (orig.)

A study of tooth brushing pattern and its effects on dental tissues in ...

African Journals Online (AJOL)

The prevalence of non carious cervical lesion was 3% and these lesions were found in males only. Conclusion: The pattern of tooth brushing was correct in 51.7% of the respondents as reported. However the effect on dental tissues though present is not exaggerated when compared to other studies done in other parts of ...

Technique: imaging earliest tooth development in 3D using a silver-based tissue contrast agent.

Science.gov (United States)

Raj, Muhammad T; Prusinkiewicz, Martin; Cooper, David M L; George, Belev; Webb, M Adam; Boughner, Julia C

2014-02-01

Looking in microscopic detail at the 3D organization of initiating teeth within the embryonic jaw has long-proved technologically challenging because of the radio-translucency of these tiny un-mineralized oral tissues. Yet 3D image data showing changes in the physical relationships among developing tooth and jaw tissues are vital to understand the coordinated morphogenesis of vertebrate teeth and jaws as an animal grows and as species evolve. Here, we present a new synchrotron-based scanning solution to image odontogenesis in 3D and in histological detail using a silver-based contrast agent. We stained fixed, intact wild-type mice aged embryonic (E) day 10 to birth with 1% Protargol-S at 37°C for 12-32 hr. Specimens were scanned at 4-10 µm pixel size at 28 keV, just above the silver K-edge, using micro-computed tomography (µCT) at the Canadian Light Source synchrotron. Synchrotron µCT scans of silver-stained embryos showed even the earliest visible stages of tooth initiation, as well as many other tissue types and structures, in histological detail. Silver stain penetration was optimal for imaging structures in intact embryos E15 and younger. This silver stain method offers a powerful yet straightforward approach to visualize at high-resolution and in 3D the earliest stages of odontogenesis in situ, and demonstrates the important of studying the tooth organ in all three planes of view. Copyright © 2013 Wiley Periodicals, Inc.

Test Tube Tooth: The Next Big Thing.

Science.gov (United States)

Yadav, Preeti; Tahir, Mohammed; Yadav, Harsh; Sureka, Rakshit; Garg, Aarti

2016-06-01

Unlike some vertebrates and fishes, humans do not have the capacity for tooth regeneration after the loss of permanent teeth. Although artificial replacement with removable dentures, fixed prosthesis and implants is possible through advances in the field of prosthetic dentistry, it would be ideal to recreate a third set of natural teeth to replace lost dentition. For many years now, researchers in the field of tissue engineering have been trying to bioengineer dental tissues as well as whole teeth. In order to attain a whole tooth through dental engineering, that has the same or nearly same biological, mechanical and physical properties of a natural tooth, it's necessary to deal with all the cells and tissues which are concerned with the formation, maintenance and repair of the tooth. In this article we review the steps involved in odontogenesis or organogenesis of a tooth and progress in the bioengineering of a whole tooth.

Matrix metalloproteinases and tissue inhibitors of metalloproteinases in gingival crevicular fluid during orthodontic tooth movement.

NARCIS (Netherlands)

Bildt, M.M.; Bloemen, M.; Kuijpers-Jagtman, A.M.; Hoff, J.W. Von den

2009-01-01

Orthodontic tooth movement requires extensive re-modelling of the periodontium. Matrix metalloproteinases (MMPs) degrade the extracellular matrix during re-modelling, while their activity is regulated by the tissue inhibitors of metalloproteinases (TIMPs). The aim of this study was to investigate

Matrix metalloproteinases and tissue inhibitors of metalloproteinases in gingival crevicular fluid during orthodontic tooth movement

NARCIS (Netherlands)

Bildt, Miriam; Bloemen, M; Kuijpers-Jagtman, A.M.; Von Den Hoff, Johannes W

2009-01-01

Orthodontic tooth movement requires extensive re-modelling of the periodontium. Matrix metalloproteinases (MMPs) degrade the extracellular matrix during re-modelling, while their activity is regulated by the tissue inhibitors of metalloproteinases (TIMPs). The aim of this study was to investigate

Estudio in vitro sobre los efectos de la cocaína sobre los tejidos duros del diente In vitro study on the effects of cocaine on the hard tissues of the tooth

Directory of Open Access Journals (Sweden)

Eduvigis Solórzano Navarro

2008-12-01

Full Text Available El uso de los derivados de la cocaína es un problema de salud pública en continuo crecimiento. Estas drogas son frecuentemente frotadas sobre la mucosa gingival, pero sus efectos son poco conocidos y de difícil diagnóstico. Con este trabajo se pretende demostrar in vitro, que la aplicación por frotación de la cocaína sobre la superficie dentaria produce erosión del esmalte. Se seleccionaron 30 dientes sanos, distribuidos aleatoriamente en 3 grupos, a los cuales se frotó sobre la superficie vestibular clorhidrato de cocaína, basuco y limón (grupo control respectivamente, durante 40 semanas. Las lesiones más características observadas fueron fractura y pérdida de sustancia dura, demostrando así que la aplicación tópica y continua de drogas en cavidad bucal produce lesiones en los tejidos duros del diente.The use of cocaine derivatives is an increasingly growing public health problem. These drugs are frequently rubbed on the gingival mucosa, but their efffects are little known and difficult to be diagnosed. This paper pretends to prove in vitro that the rubbing of cocaine on the dental surface produces enamel erosion. 30 healthy teeth were selected and distributed at random into 3 groups that were rubbed cocaine hydrochloride, bazuko and lemon (control group on the vestibular surface, respectively, during 40 weeks. The most observed characteristic lesions were fracture and loss of the dental hard substance, which showed that the topical and continual application of drugs on the oral cavity causes lesions in the hard tissues of the tooth.

Photoacoustic imaging in both soft and hard biological tissue

International Nuclear Information System (INIS)

Li, T; Dewhurst, R J

2010-01-01

To date, most Photoacoustic (PA) imaging results have been from soft biotissues. In this study, a PA imaging system with a near-infrared pulsed laser source has been applied to obtain 2-D and 3-D images from both soft tissue and post-mortem dental samples. Imaging results showed that the PA technique has the potential to image human oral disease, such as early-stage teeth decay. For non-invasive photoacoustic imaging, the induced temperature and pressure rises within biotissues should not cause physical damage to the tissue. Several simulations based on the thermoelastic effect have been applied to predict initial temperature and pressure fields within a tooth sample. Predicted initial temperature and pressure rises are below corresponding safety limits.

Interaction of ArF laser with dental hard tissue (AEM Study

Directory of Open Access Journals (Sweden)

Abbas Majdabadi

2016-07-01

Full Text Available Background and Aims: Nowadays lasers are used as alternatives to the tooth preparation because of reducing pain and bloodshed. The aim of this study was to observe the effect of ArF laser on the dental hard tissues. Materials and Methods: For this research human molar teeth with no caries or dental restoration and enamel cracks were used. Irradiation laser energies were taken 95, 70 and 50 mJ for enamel and 80, 70 and 50 mJ for dentine. Then, for each of energy values pulse numbers (repetition rate were adjusted at 200, 400, 600, 800, 1000 and 1500. Ablation was carried out without water spray on both enamel and dentine. Finally, the dimensions of ablated areas were measured by using a camera connected to the computer and results were applied in graphs. Results: For each energy value, the ablation dimension increased by increasing pulse numbers. Ablation depth in dentine was more than that of for enamel. Trends of graphs for dentine and enamel were the same. SEM images of ablations by 95 mJ energy on enamel and 80 mJ energy on dentine showed sharp edges. Conclusion: Ablation depths increased by increasing pulse numbers, for each energy level. However, this increase was not that as expected, because the lack of water spray while irradiating.

Odontoblasts: Specialized hard-tissue-forming cells in the dentin-pulp complex.

Science.gov (United States)

Kawashima, Nobuyuki; Okiji, Takashi

2016-07-01

Odontoblasts are specialized cells that produce dentin and exhibit unique morphological characteristics; i.e., they extend cytoplasmic processes into dentinal tubules. While osteoblasts, which are typical hard-tissue-forming cells, are generated from mesenchymal stem cells during normal and pathological bone metabolism, the induction of odontoblasts only occurs once during tooth development, and odontoblasts survive throughout the lives of healthy teeth. During the differentiation of odontoblasts, signaling molecules from the inner enamel epithelium are considered necessary for the differentiation of odontoblast precursors, i.e., peripheral dental papilla cells. If odontoblasts are destroyed by severe external stimuli, such as deep caries, the differentiation of dental pulp stem cells into odontoblast-like cells is induced. Various bioactive molecules, such as non-collagenous proteins, might be involved in this process, although the precise mechanisms responsible for odontoblast differentiation have not been fully elucidated. Recently, our knowledge about the other functional activities of odontoblasts (apart from dentin formation) has increased. For example, it has been suggested that odontoblasts might act as nociceptive receptors, and surveillance cells that detect the invasion of exogenous pathogens. The regeneration of the dentin-pulp complex has recently gained much attention as a promising future treatment modality that could increase the longevity of pulpless teeth. Finally, congenital dentin anomalies, which are concerned with the disturbance of odontoblast functions, are summarized. © 2016 Japanese Teratology Society.

Autogenous tooth transplantation: an alternative to replace extracted tooth

Directory of Open Access Journals (Sweden)

David B. Kamadjaja

2015-09-01

Full Text Available Background: The gold standard treatment to replace missing tooth is dental implants, however, in certain cases, such as in young patients its placement is contraindicated. Autogenous tooth transplantation, which has been widely done in Scandinavian countries for many years, may become a good alternative to overcome this problem. Purpose: This article attempted to provide information about the indication, treatment planning, surgical technique and the successful result of autogenous tooth transplantation. Case: A fifteen year old male patient presented with large caries and periapical disease of his lower left first molar, which was partially erupted and the roots was not fully formed in radiograph. Case management: Autogenous tooth transplantation procedure was performed consisting of extraction of #36, odontectomy of #38 followed by its implantation to socket #36 and fixation of the transplanted tooth to the adjacent teeth. Post operative evaluation was done on regular basis within 18 months period. There was no complaint, the tooth was clinically stable and no evidence of periodontal problem. Serial radiographs showed healing of alveolar bone and periodontal tissue, and the complete root formation was evident by 18 months post operatively. Conclusion: Autogenous tooth transplantation is a potential alternative to replace extracted tooth. Provided that the case be properly planned and operation carefully performed, successful result of this treatment can be achieved.

RNA-Sequencing Analyses Demonstrate the Involvement of Canonical Transient Receptor Potential Channels in Rat Tooth Germ Development

Directory of Open Access Journals (Sweden)

Jun Yang

2017-06-01

Full Text Available Tooth development depends on multiple molecular interactions between the dental epithelium and mesenchyme, which are derived from ectodermal and ectomesenchymal cells, respectively. We report on a systematic RNA sequencing analysis of transcriptional expression levels from the bud to hard tissue formation stages of rat tooth germ development. We found that GNAO1, ENO1, EFNB1, CALM1, SIAH2, ATP6V0A1, KDELR2, GTPBP1, POLR2C, SORT1, and members of the canonical transient receptor potential (TRPC channel family are involved in tooth germ development. Furthermore, Cell Counting Kit 8 (CCK8 and Transwell migration assays were performed to explore the effects of these differentially expressed genes (DEGs on the proliferation and migration of dental pulp stem cells. Immunostaining revealed that TRPC channels are expressed at varying levels during odontogenesis. The identified genes represent novel candidates that are likely to be vital for rat tooth germ development. Together, the results provide a valuable resource to elucidate the gene regulatory mechanisms underlying mammalian tooth germ development.

Calcium and magnesium content in hard tissues of rats under condition of subchronic lead intoxication.

Science.gov (United States)

Todorovic, Tatjana; Vujanovic, Dragana; Dozic, Ivan; Petkovic-Curcin, Aleksandra

2008-03-01

Lead manifests toxic effects in almost all organs and tissues, especially in: the nervous system, hematopoietic system, kidney and liver. This metal has a special affinity for deposition in hard tissue, i.e., bones and teeth. It is generally believed that the main mechanism of its toxicity relies on its interaction with bioelements, especially with Ca and Mg. This article analyses the influence of Pb poisoning on Ca and Mg content in hard tissues, (mandible, femur, teeth and skull) of female and young rats. Experiments were carried out on 60 female rats, AO breed, and on 80 of their young rats (offspring). Female rats were divided into three groups: the first one was a control group, the second one received 100 mg/kg Pb2+ kg b.wt. per day in drinking water, the third one received 30 mg/kg Pb(2+) kg b.wt. per day in drinking water. Young rats (offspring) were divided into the same respective three groups. Lead, calcium and magnesium content in hard tissues (mandible, femur, teeth-incisors and skull) was determined by flame atomic absorption spectrophotometry in mineralized samples. There was a statistically significant Pb deposition in all analyzed female and young rat hard tissues. Ca and Mg contents were significantly reduced in all female and young rat hard tissues. These results show that Pb poisoning causes a significant reduction in Ca and Mg content in animal hard tissues, which is probably the consequence of competitive antagonism between Pb and Ca and Mg.

Revascularization of an impacted, immature dilacerated permanent maxillary central incisor associated with odontoma and a supernumerary tooth

Directory of Open Access Journals (Sweden)

Priya Subramaniam

2013-01-01

Full Text Available To intentionally replant an impacted immature permanent maxillary central incisor in the mixed dentition period followed by revascularization in order to achieve apical root closure. A 9-year-old boy presented with retained maxillary left primary incisors. Radiographic evaluation revealed the presence of a supernumerary tooth and an odontoma associated with an impacted permanent maxillary left central incisor, having root dilaceration. Treatment included surgical removal of mesiodens and odontoma. The impacted dilacerated permanent central incisor was removed and intentionally replanted, followed by revascularization of pulp. During the follow-up, root end closure with narrowing of canal space was observed, patient has been asymptomatic and the tooth remains vital. Revascularization of the immature reimplanted tooth showed continued root development and thickening of the lateral dentinal walls through deposition of new hard tissue and narrowing of the canal space.

The combination use of platelet-rich fibrin and treated dentin matrix for tooth root regeneration by cell homing.

Science.gov (United States)

Ji, Baohui; Sheng, Lei; Chen, Gang; Guo, Shujuan; Xie, Li; Yang, Bo; Guo, Weihua; Tian, Weidong

2015-01-01

Endogenous regeneration through cell homing provides an alternative approach for tissue regeneration, except cell transplantation, especially considering clinical translation. However, tooth root regeneration through cell homing remains a provocative approach in need of intensive study. Both platelet-rich fibrin (PRF) and treated dentin matrix (TDM) are warehouses of various growth factors, which can promote cell homing. We hypothesized that endogenous stem cells are able to sense biological cues from PRF membrane and TDM, and contribute to the regeneration of tooth root, including soft and hard periodontal tissues. Therefore, the biological effects of canine PRF and TDM on periodontal ligament stem cells (PDLSCs) and bone marrow mesenchymal stem cells (BMSCs) were evaluated respectively in vitro. Beagle dogs were used as orthotopic transplantation model. It was found that PRF significantly recruited and stimulated the proliferation of PDLSCs and BMSCs in vitro. Together, PRF and TDM induced cell differentiation by upregulating the mineralization-related gene expression of bone sialoprotein (BSP) and osteopotin (OPN) after 7 days coculture. In vivo, transplantation of autologous PRF and allogeneic TDM into fresh tooth extraction socket achieved successful root regeneration 3 months postsurgery, characterized by the regeneration of cementum and periodontal ligament (PDL)-like tissues with orientated fibers, indicative of functional restoration. The results suggest that tooth root connected to the alveolar bone by cementum-PDL complex can be regenerated through the implantation of PRF and TDM in a tooth socket microenvironment, probably by homing of BMSCs and PDLSCs. Furthermore, bioactive cues and inductive microenvironment are key factors for endogenous regeneration. This approach provides a tangible pathway toward clinical translation.

The effect of hard tissue surgical changes on soft tissue displacement: a pilot CBCT study

Directory of Open Access Journals (Sweden)

Leonardo Koerich

Full Text Available ABSTRACT Introduction: This pilot study had as main objective to test the reliability of a new method to evaluate orthognathic surgery outcomes and also, to understand the effect of hard tissue changes on soft tissue displacement. Methods: The sample consisted of eight patients that underwent bimaxillary advancement and had CBCT at two time points (before surgery and 6-8 months follow-up. Voxel-based cranial base superimposition was used to register the scans. A different technique of iterative closest point (ICP was used to measure and correlate the changes. The average displacement of 15 areas (4 hard tissue and 11 soft tissue were measured twice. Results: ICC was > 0.99 for all areas. Changes in the tip of the nose did not correlate with changes in any maxillary area, whereas soft tissue A point, A point and upper lips had correlation with several areas. The highest correlation for the maxilla was between the upper lip and the left/right supra cheilion (p< 0.001, r= 0.91 and p< 0.001, r= 0.93, respectively. In the mandible, the majority of the correlations involved soft tissue pogonion, pogonion and lower incisors, with the strongest one between pogonion and lower incisors (p< 0.001, r= 0.98. Conclusion: With the proper case selection, ICP is a reliable method that can be used to assess three-dimensional changes.

Histological observation on dental hard tissue irradiated by ultrashort-pulsed laser

Science.gov (United States)

Uchizono, Takeyuki; Awazu, Kunio; Igarashi, Akihiro; Kato, Junji; Hirai, Yoshito

2006-04-01

In the field of dentistry, effectiveness of USPL irradiation is researched because USPL has less thermal side effect to dental hard tissue. In this paper, we observed morphological change and optical change of dental hard tissue irradiated by USPL for discussing the safety and effectiveness of USPL irradiation to dental hard tissues. Irradiated samples were crown enamel and root dentin of bovine teeth. Lasers were Ti:sapphire laser, which had pulse duration (P d)of 130 fsec and pulse repetition rate (f) of 1kHz and wavelength (l) of 800nm, free electron laser (FEL), which had P d of 15 μsec and f of 10Hz and wavelength of 9.6μm, and Er:YAG laser, which had P d of 250 μsec and f of 10Hz and wavelength of 2.94μm. After laser irradiation, the sample surfaces and cross sections were examined with SEM and EDX. The optical change of samples was observed using FTIR. In SEM, the samples irradiated by USPL had sharp and accurate ablation with no crack and no carbonization. But, in FEL and Er:YAG laser, the samples has rough ablation with crack and carbonization. It was cleared that the P/Ca ratio of samples irradiated by USPL had same value as non-irradiated samples. There was no change in the IR absorption spectrum between samples irradiated by USPL and non-irradiated sample. But, they of samples irradiated by FEL and Er:YAG laser, however, had difference value as non-irradiated samples. These results showed that USPL might be effective to ablate dental hard tissue without thermal damage.

Remineralising efficacy of tooth mousse plus (ACP CCPF) on radiated tooth

International Nuclear Information System (INIS)

Priya; Hegde, Mithra N.; Hegde, Nidarsh D.; Suchetha Kumari, N.; Sanjeev, Ganesh

2016-01-01

Dental complication is the common problem faced all over the world. Subjects with poor oral hygiene and patients undergoing radiotherapy for oral cancers are developing signs of decalcification of enamel, lesions and Caries. A well designed treatment is necessary to safeguard the tooth enamel surface before and after radiation, only then the caries on the enamel surface can be arrested by re-hardening it and ultimately converting them to the normal healthy condition. To determine the Annealing effect of radiated tooth by testing maximum micro hardness of the teeth before and after 30 days of radiation by the application of Remineralising agents. In our study, we collected 30 intact caries free human molar teeth and were sectioned mesio-distally

Drugs influencing orthodontic tooth movement: An overall review

Directory of Open Access Journals (Sweden)

Kamatchi Diravidamani

2012-01-01

Full Text Available Orthodontic treatment is based on the premise that when force is delivered to a tooth and thereby transmitted to the adjacent investing tissues, certain mechanical, chemical, and cellular events take place within these tissues, which allow for structural alterations and contribute to the movement of that tooth. Molecules present in drugs and nutrients consumed regularly by patients can reach the mechanically stressed paradental tissues through the circulation and interact with local target cells. The combined effect of mechanical forces and one or more of these agents may be inhibitory, additive, or synergistic. Current orthodontic research aims to develop methods of increasing the tissue concentration of molecules promoting tooth movement, while simultaneously decreasing the concentration of unwanted elements which can produce harmful side effects. This article discusses in detail the various possible drugs that can bring about alterations in the desired orthodontic tooth movement.

Heat generation caused by ablation of dental hard tissues with an ultrashort pulse laser (USPL) system.

Science.gov (United States)

Braun, Andreas; Krillke, Raphael Franz; Frentzen, Matthias; Bourauel, Christoph; Stark, Helmut; Schelle, Florian

2015-02-01

Heat generation during the removal of dental hard tissues may lead to a temperature increase and cause painful sensations or damage dental tissues. The aim of this study was to assess heat generation in dental hard tissues following laser ablation using an ultrashort pulse laser (USPL) system. A total of 85 specimens of dental hard tissues were used, comprising 45 specimens of human dentine evaluating a thickness of 1, 2, and 3 mm (15 samples each) and 40 specimens of human enamel with a thickness of 1 and 2 mm (20 samples each). Ablation was performed with an Nd:YVO4 laser at 1,064 nm, a pulse duration of 9 ps, and a repetition rate of 500 kHz with an average output power of 6 W. Specimens were irradiated for 0.8 s. Employing a scanner system, rectangular cavities of 1-mm edge length were generated. A temperature sensor was placed at the back of the specimens, recording the temperature during the ablation process. All measurements were made employing a heat-conductive paste without any additional cooling or spray. Heat generation during laser ablation depended on the dental hard tissue (enamel or dentine) and the thickness of the respective tissue (p dental hard tissues, heat generation has to be considered. Especially during laser ablation next to pulpal tissues, painful sensations and potential thermal injury of pulp tissue might occur.

TOOTH COLOR AND REFLECTANCE AS RELATED TO LIGHT-SCATTERING AND ENAMEL HARDNESS

NARCIS (Netherlands)

TENBOSCH, JJ; COOPS, JC

Tooth color is determined by the paths of light inside the tooth and absorption along these paths. This paper tests the hypothesis that, since the paths are determined by scattering, a relation between color and scattering coefficients exists. One hundred and two extracted incisors were fixed in

Periodontal tissue activation by vibration: intermittent stimulation by resonance vibration accelerates experimental tooth movement in rats.

Science.gov (United States)

Nishimura, Makoto; Chiba, Mirei; Ohashi, Toshiro; Sato, Masaaki; Shimizu, Yoshiyuki; Igarashi, Kaoru; Mitani, Hideo

2008-04-01

Accelerating the speed of orthodontic tooth movement should contribute to the shortening of the treatment period. This would be beneficial because long treatment times are a negative aspect of orthodontic treatment. In this study, we evaluated the effects of mechanical stimulation by resonance vibration on tooth movement, and we showed the cellular and molecular mechanisms of periodontal ligament responses. The maxillary first molars of 6-week-old male Wistar rats were moved to the buccal side by using an expansive spring for 21 days (n = 6, control group), and the amount of tooth movement was measured. Additional vibrational stimulation (60 Hz, 1.0 m/s(2)) was applied to the first molars by using a loading vibration system for 8 minutes on days 0, 7, and 14 during orthodontic tooth movement (n = 6, experimental group). The animals were killed under anesthesia, and each maxilla was dissected. The specimens were fixed, decalcified, and embedded in paraffin. Sections were used for immunohistochemical analysis of receptor activator of NF kappa B ligand (RANKL) expression. The number of osteoclasts in the alveolar bone was counted by using TRAP staining, and the amount of root resorption was measured in sections stained with hematoxylin and eosin. The average resonance frequency of the maxillary first molar was 61.02 +/- 8.38 Hz. Tooth movement in the experimental group was significantly greater than in the control group (P vibration might accelerate orthodontic tooth movement via enhanced RANKL expression in the periodontal ligament without additional damage to periodontal tissues such as root resorption.

Recent advances in engineering of tooth and tooth structures using postnatal dental cells

Directory of Open Access Journals (Sweden)

Masaki J. Honda

2010-02-01

This review focuses on the performance of postnatal and adult dental cells that have been used for generating teeth. Their ability to contribute to tooth development was assessed in the omentum or in the tooth socket. Adult dental cells were limited in their potential owing to various parameters. From these results described, new approaches for regenerated teeth are proposed in this review. One strategy to replace teeth is tooth root engineering using tissue from postnatal teeth. Since the enamel organ epithelium disappears after tooth maturation, the epithelial rest cells of Malassez were evaluated to determine their capacity to generate enamel. From these results, it is suggested that erupted mature teeth have cell sources with the capacity to produce tooth root. The development of biological approaches for tooth root regeneration using postnatal dental cells is promising and remains one of the greatest challenges in the dental field in the years to come.

Application of coenzyme Q10 for accelerating soft tissue wound healing after tooth extraction in rats.

Science.gov (United States)

Yoneda, Toshiki; Tomofuji, Takaaki; Kawabata, Yuya; Ekuni, Daisuke; Azuma, Tetsuji; Kataoka, Kota; Kunitomo, Muneyoshi; Morita, Manabu

2014-12-10

Accelerating wound healing after tooth extraction is beneficial in dental treatment. Application of antioxidants, such as reduced coenzyme Q10 (rCoQ10), may promote wound healing after tooth extraction. In this study, we examined the effects of topical application of rCoQ10 on wound healing after tooth extraction in rats. After maxillary first molars were extracted, male Fischer 344 rats (8 weeks old) (n = 27) received topical application of ointment containing 5% rCoQ10 (experimental group) or control ointment (control group) to the sockets for 3 or 8 days (n = 6-7/group). At 3 days after extraction, the experimental group showed higher collagen density and lower numbers of polymorphonuclear leukocytes in the upper part of socket, as compared to the control group (p healing in the soft tissue of the alveolar socket, but that rCoQ10 has a limited effect on bone remodeling in rats.

Investigation of ultrashort-pulsed laser on dental hard tissue

Science.gov (United States)

Uchizono, Takeyuki; Awazu, Kunio; Igarashi, Akihiro; Kato, Junji; Hirai, Yoshito

2007-02-01

Ultrashort-pulsed laser (USPL) can ablate various materials with precious less thermal effect. In laser dentistry, to solve the problem that were the generation of crack and carbonized layer by irradiating with conventional laser such as Er:YAG and CO II laser, USPL has been studied to ablate dental hard tissues by several researchers. We investigated the effectiveness of ablation on dental hard tissues by USPL. In this study, Ti:sapphire laser as USPL was used. The laser parameter had the pulse duration of 130 fsec, 800nm wavelength, 1KHz of repetition rate and the average power density of 90~360W/cm2. Bovine root dentin plates and crown enamel plates were irradiated with USPL at 1mm/sec using moving stage. The irradiated samples were analyzed by SEM, EDX, FTIR and roughness meter. In all irradiated samples, the cavity margin and wall were sharp and steep, extremely. In irradiated dentin samples, the surface showed the opened dentin tubules and no smear layer. The Ca/P ratio by EDX measurement and the optical spectrum by FTIR measurement had no change on comparison irradiated samples and non-irradiated samples. These results confirmed that USPL could ablate dental hard tissue, precisely and non-thermally. In addition, the ablation depths of samples were 10μm, 20μm, and 60μm at 90 W/cm2, 180 W/cm2, and 360 W/cm2, approximately. Therefore, ablation depth by USPL depends on the average power density. USPL has the possibility that can control the precision and non-thermal ablation with depth direction by adjusting the irradiated average power density.

Age-related changes in the tooth-bone interface area of acrodont dentition in the chameleon.

Science.gov (United States)

Dosedělová, Hana; Štěpánková, Kateřina; Zikmund, Tomáš; Lesot, Herve; Kaiser, Jozef; Novotný, Karel; Štembírek, Jan; Knotek, Zdeněk; Zahradníček, Oldřich; Buchtová, Marcela

2016-09-01

Chameleon teeth develop as individual structures at a distance from the developing jaw bone during the pre-hatching period and also partially during the post-hatching period. However, in the adult, all teeth are fused together and tightly attached to the jaw bone by mineralized attachment tissue to form one functional unit. Tooth to bone as well as tooth to tooth attachments are so firm that if injury to the oral cavity occurs, several neighbouring teeth and pieces of jaw can be broken off. We analysed age-related changes in chameleon acrodont dentition, where ankylosis represents a physiological condition, whereas in mammals, ankylosis only occurs in a pathological context. The changes in hard-tissue morphology and mineral composition leading to this fusion were analysed. For this purpose, the lower jaws of chameleons were investigated using X-ray micro-computed tomography, laser-induced breakdown spectroscopy and microprobe analysis. For a long time, the dental pulp cavity remained connected with neighbouring teeth and also to the underlying bone marrow cavity. Then, a progressive filling of the dental pulp cavity by a mineralized matrix occurred, and a complex network of non-mineralized channels remained. The size of these unmineralized channels progressively decreased until they completely disappeared, and the dental pulp cavity was filled by a mineralized matrix over time. Moreover, the distribution of calcium, phosphorus and magnesium showed distinct patterns in the different regions of the tooth-bone interface, with a significant progression of mineralization in dentin as well as in the supporting bone. In conclusion, tooth-bone fusion in chameleons results from an enhanced production of mineralized tissue during post-hatching development. Uncovering the developmental processes underlying these outcomes and performing comparative studies is necessary to better understand physiological ankylosis; for that purpose, the chameleon can serve as a useful model

Autotransplantation donor tooth site harvesting using piezosurgery.

Science.gov (United States)

Ylikontiola, Leena P; Sándor, George K

2016-01-01

The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

Estimation of soft- and hard-tissue thickness at implant sites

Directory of Open Access Journals (Sweden)

Anil Kumar

2014-01-01

Full Text Available Introduction: Anchorage control is a critical consideration when planning treatment for patients with dental and skeletal malocclusions. To obtain sufficient stability of implants, the thickness of the soft tissue and the cortical-bone in the placement site must be considered; so as to provide an anatomical map in order to assist the clinician in the placement of the implants. Objective: The aim of this study is to evaluate the thickness of soft- and hard-tissue. Materials and Methods: To measure soft tissue and cortical-bone thicknesses, 12 maxillary cross-sectional specimens were obtained from the cadavers, which were made at three maxillary mid-palatal suture areas: The interdental area between the first and second premolars (Group 1, the second premolar and the first molar (Group 2, and the first and second molars (Group 3. Sectioned samples along with reference rulers were digitally scanned. Scanned images were calibrated and measurements were made with image-analysis software. We measured the thickness of soft and hard-tissues at five sectional areas parallel to the buccopalatal cementoenamel junction (CEJ line at 2-mm intervals and also thickness of soft tissue at the six landmarks including the incisive papilla (IP on the palate. The line perpendicular to the occlusal plane was made and measurement was taken at 4-mm intervals from the closest five points to IP. Results: (1 Group 1:6 mm from CEJ in buccal side and 2 mm from CEJ in palatal side. (2 Group 2:8 mm from CEJ in buccal side and 4 mm from CEJ in palatal side. (3 Group 3:8 mm from CEJ in buccal side and 8 mm from CEJ in palatal side. Conclusions: The best site for placement of implant is with thinnest soft tissue and thickest hard tissue, which is in the middle from CEJ in buccal side and closest from CEJ in palatal side in Group 1 and faraway from CEJ in buccal side and closest from CEJ in palatal side in Group 2 and faraway from CEJ in buccal side and faraway from CEJ in palatal

Prevention of dental anomalies in children by prosthetics defects hard tooth tissues and dentitions: the need to possibilities

Directory of Open Access Journals (Sweden)

Suetenkov D.Ye.

2011-03-01

Full Text Available This article presents the possibility of restore the function and anatomy of the tooth and replacement of defects of dentition by prosthesis in children under the removable bite as a method of prevention of dentoalveolar anomalies. Identified the need for prosthetic treatment of children and the willingness of dentists as primary health care professional to address the problems identified. A clinical analysis of complex treatment of defects in the teeth with fixed restorations

Effect of drugs on orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Siti Sarah Aulia Amrullah

2016-06-01

Full Text Available Orthodontic tooth movement is basically a biological response to mechanical forces given to the teeth in orthodontic treatment, which involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structure. Remodeling changes in periodontal tissues are considered to be essential in effecting orthodontic tooth movement which is the base of orthodontic correction. Molecules produced in various diseased tissues or drugs and nutrients consumed regularly by patients, can influence mechanically stressed periodontal tissue through the circulation and interact with target cell combination of which may be inhibitory, additive or synergize. Medications might have an important influence on the rate of tooth movement, and information on their consumption is essential to adequately discuss treatment planning with patients. Therefore it is imperative to the practitioners being in medical profession, must pay close attention to the drug consumption history of every patient before and during the course of treatment.

Prevalence of developmental dental hard-tissue anomalies and association with caries and oral hygiene status of children in Southwestern, Nigeria.

Science.gov (United States)

Popoola, Bamidele O; Onyejaka, Nneka; Folayan, Morenike O

2016-07-07

Developmental dental hard tissue anomalies are often associated with oral health problems. This study determined the clinical prevalence of developmental dental hard tissue anomalies in the permanent dentition of children resident in southwestern Nigeria and its association with dental caries and poor oral hygiene status. This was a cross-sectional study recruiting 1565 school children, 12 to 15 year old attending schools in Ibadan, Oyo State and Ile-Ife, Osun State. All eligible study participants had oral examinations conducted to determine presence of developmental hard dental tissue anomalies, caries and oral hygiene status. The prevalence of developmental dental hard tissue anomalies was determined. Logistic Poisson regression was used to determine the association of between developmental dental hard tissue anomalies, caries and oral hygiene status. Only 65 (4.2 %) children had clinically diagnosed developmental dental hard tissue anomalies. The most prevalent anomaly was enamel hypoplasia (2.2 %). More females (p = 0.003) and more children with middle socioeconomic class (p = 0.001) had enamel hypoplasia. The probability of having poor oral hygiene was significantly increased for children with developmental dental anomalies (APR: 0.07; 95 % CI: 0.03 - 0.12; p = 0.002). The probability of having caries was insignificantly increased for children with developmental dental hard tissue anomalies (APR: 0.005; 95 % CI: -0.03 - 0.04; p = 0.08). The most prevalence clinically detectable developmental dental hard tissue anomalies for the study population was enamel hypoplasia. The presence of developmental dental hard tissue anomalies significantly increased the chances of having poor oral hygiene but not caries. Further studies are required to understand if poor oral hygiene is associated with dental caries in children with developmental dental hard tissue anomalies.

Hard tissue regeneration using bone substitutes: an update on innovations in materials.

Science.gov (United States)

Sarkar, Swapan Kumar; Lee, Byong Taek

2015-05-01

Bone is a unique organ composed of mineralized hard tissue, unlike any other body part. The unique manner in which bone can constantly undergo self-remodeling has created interesting clinical approaches to the healing of damaged bone. Healing of large bone defects is achieved using implant materials that gradually integrate with the body after healing is completed. Such strategies require a multidisciplinary approach by material scientists, biological scientists, and clinicians. Development of materials for bone healing and exploration of the interactions thereof with the body are active research areas. In this review, we explore ongoing developments in the creation of materials for regenerating hard tissues.

Evaluation of human muscle hardness after dynamic exercise with ultrasound real-time tissue elastography: A feasibility study

Energy Technology Data Exchange (ETDEWEB)

Yanagisawa, O., E-mail: o.yanagisawa@aoni.waseda.jp [Faculty of Sport Sciences, Waseda University, Tokorozawa, Saitama (Japan); Niitsu, M. [Department of Radiological Science, Faculty of Health Sciences, Tokyo Metropolitan University, Arakawa-ku, Tokyo (Japan); Kurihara, T. [Faculty of Sport and Health Science, Ritsumeikan University, Kusatsu, Shiga (Japan); Fukubayashi, T. [Faculty of Sport Sciences, Waseda University, Tokorozawa, Saitama (Japan)

2011-09-15

Aim: To assess the feasibility of ultrasound real-time tissue elastography (RTE) for measuring exercise-induced changes in muscle hardness and to compare the findings of RTE with those of a tissue hardness meter for semi-quantitative assessment of the hardness of exercised muscles. Materials and methods: Nine male participants performed an arm-curl exercise. RTE measurements were performed by manually applying repetitive compression with the transducer on the scan position before exercise, immediately after exercise, and at 30 min after exercise; strain ratios between muscle and a reference material (hydrogel) were calculated (muscle strain/material strain). A tissue hardness meter was also used to evaluate muscle hardness. The intraclass correlation coefficients (ICCs) for the three repeated measurements at each measurement time were calculated to evaluate the intra-observer reproducibility of each technique. Results: Immediately after exercise, the strain ratio and the value obtained using the tissue hardness meter significantly decreased (from 1.65 to 1.35) and increased (from 51.8 to 54.3), respectively. Both parameters returned to their pre-exercise value 30 min after exercise. The ICCs of the RTE (and the ICCs of the muscle hardness meter) were 0.971 (0.816) before exercise, 0.939 (0.776) immediately after exercise, and 0.959 (0.882) at 30 min after exercise. Conclusion: Similar to the muscle hardness meter, RTE revealed the exercise-induced changes of muscle hardness semi-quantitatively. The intra-observer reproducibility of RTE was very high at each measurement time. These findings suggest that RTE is a clinically useful technique for assessing hardness of specific exercised muscles.

Evaluation of human muscle hardness after dynamic exercise with ultrasound real-time tissue elastography: A feasibility study

International Nuclear Information System (INIS)

Yanagisawa, O.; Niitsu, M.; Kurihara, T.; Fukubayashi, T.

2011-01-01

Aim: To assess the feasibility of ultrasound real-time tissue elastography (RTE) for measuring exercise-induced changes in muscle hardness and to compare the findings of RTE with those of a tissue hardness meter for semi-quantitative assessment of the hardness of exercised muscles. Materials and methods: Nine male participants performed an arm-curl exercise. RTE measurements were performed by manually applying repetitive compression with the transducer on the scan position before exercise, immediately after exercise, and at 30 min after exercise; strain ratios between muscle and a reference material (hydrogel) were calculated (muscle strain/material strain). A tissue hardness meter was also used to evaluate muscle hardness. The intraclass correlation coefficients (ICCs) for the three repeated measurements at each measurement time were calculated to evaluate the intra-observer reproducibility of each technique. Results: Immediately after exercise, the strain ratio and the value obtained using the tissue hardness meter significantly decreased (from 1.65 to 1.35) and increased (from 51.8 to 54.3), respectively. Both parameters returned to their pre-exercise value 30 min after exercise. The ICCs of the RTE (and the ICCs of the muscle hardness meter) were 0.971 (0.816) before exercise, 0.939 (0.776) immediately after exercise, and 0.959 (0.882) at 30 min after exercise. Conclusion: Similar to the muscle hardness meter, RTE revealed the exercise-induced changes of muscle hardness semi-quantitatively. The intra-observer reproducibility of RTE was very high at each measurement time. These findings suggest that RTE is a clinically useful technique for assessing hardness of specific exercised muscles.

Hard X-ray Microscopic Imaging Of Human Breast Tissues

Science.gov (United States)

Park, Sung H.; Kim, Hong T.; Kim, Jong K.; Jheon, Sang H.; Youn, Hwa S.

2007-01-01

X-ray microscopy with synchrotron radiation will be a useful tool for innovation of x-ray imaging in clinical and laboratory settings. It helps us observe detailed internal structure of material samples non-invasively in air. And, it also has the potential to solve some tough problems of conventional breast imaging if it could evaluate various conditions of breast tissue effectively. A new hard x-ray microscope with a spatial resolution better than 100 nm was installed at Pohang Light Source, a third generation synchrotron radiation facility in Pohang, Korea. The x-ray energy was set at 6.95 keV, and the x-ray beam was monochromatized by W/B4C monochromator. Condenser and objective zone plates were used as x-ray lenses. Zernike phase plate next to condenser zone plate was introduced for improved contrast imaging. The image of a sample was magnified 30 times by objective zone plate and 20 times by microscope objective, respectively. After additional 10 times digital magnification, the total magnifying power was up to 6000 times in the end. Phase contrast synchrotron images of 10-μm-thick female breast tissue of the normal, fibroadenoma, fibrocystic change and carcinoma cases were obtained. By phase contrast imaging, hard x-rays enable us to observe many structures of breast tissue without sample preparations such as staining or fixation.

Hard X-ray Microscopic Imaging Of Human Breast Tissues

International Nuclear Information System (INIS)

Park, Sung H.; Kim, Hong T.; Kim, Jong K.; Jheon, Sang H.; Youn, Hwa S.

2007-01-01

X-ray microscopy with synchrotron radiation will be a useful tool for innovation of x-ray imaging in clinical and laboratory settings. It helps us observe detailed internal structure of material samples non-invasively in air. And, it also has the potential to solve some tough problems of conventional breast imaging if it could evaluate various conditions of breast tissue effectively. A new hard x-ray microscope with a spatial resolution better than 100 nm was installed at Pohang Light Source, a third generation synchrotron radiation facility in Pohang, Korea. The x-ray energy was set at 6.95 keV, and the x-ray beam was monochromatized by W/B4C monochromator. Condenser and objective zone plates were used as x-ray lenses. Zernike phase plate next to condenser zone plate was introduced for improved contrast imaging. The image of a sample was magnified 30 times by objective zone plate and 20 times by microscope objective, respectively. After additional 10 times digital magnification, the total magnifying power was up to 6000 times in the end. Phase contrast synchrotron images of 10-μm-thick female breast tissue of the normal, fibroadenoma, fibrocystic change and carcinoma cases were obtained. By phase contrast imaging, hard x-rays enable us to observe many structures of breast tissue without sample preparations such as staining or fixation

Application of Coenzyme Q10 for Accelerating Soft Tissue Wound Healing after Tooth Extraction in Rats

Directory of Open Access Journals (Sweden)

Toshiki Yoneda

2014-12-01

Full Text Available Accelerating wound healing after tooth extraction is beneficial in dental treatment. Application of antioxidants, such as reduced coenzyme Q10 (rCoQ10, may promote wound healing after tooth extraction. In this study, we examined the effects of topical application of rCoQ10 on wound healing after tooth extraction in rats. After maxillary first molars were extracted, male Fischer 344 rats (8 weeks old (n = 27 received topical application of ointment containing 5% rCoQ10 (experimental group or control ointment (control group to the sockets for 3 or 8 days (n = 6–7/group. At 3 days after extraction, the experimental group showed higher collagen density and lower numbers of polymorphonuclear leukocytes in the upper part of socket, as compared to the control group (p < 0.05. Gene expression of interleukin-1β, tumor necrosis factor-α and nuclear factor-κB were also lower in the experimental group than in the control group (p < 0.05. At 8 days after tooth extraction, there were no significant differences in collagen density, number of polymorphonuclear leukocytes and bone fill between the groups. Our results suggest that topical application of rCoQ10 promotes wound healing in the soft tissue of the alveolar socket, but that rCoQ10 has a limited effect on bone remodeling in rats.

Imunohistological aspects of the tissue around dental implants

Science.gov (United States)

Nimigean, Victor; Nimigean, Vanda R.; Sǎlǎvǎstru, Dan I.; Moraru, Simona; BuÅ£incu, Lavinia; Ivaşcu, Roxana V.; Poll, Alexandru

2016-03-01

Objectives: study of soft and hard tissues around implants. Material and methods: For the immunohistochemical and histological study of the implant/soft tissue interface, we examined pieces of peri-implant mucosa harvested from 35 patients. The implant/bone interface was assessed using histologic and histomorphometric examination of hard tissues around unloaded, early loaded or delayed loaded dental implants with pre-established design, with a sandblasted and acid-etched surface, placed both in extraction sockets, or after bone healing following tooth removal. This study was performed on 9 common race dogs. Results: The histological study of the implant/soft tissue interface showed regenerative modifications and moderate chronic subepithelial inflammatory reactions. Immunohistochemical evaluation of the soft tissue biopsies revealed the presence of specific immunocompetent cells and proteins of the matrix metalloproteinase (MMP) expression. Bone-implants contacts were more obvious in the apical half of the implants and at the edges of the threads, than between them. A mature, lamelliform bone containing lacunae with osteocytes and lack of connective tissue were noticed around implants that were late placed and loaded. The new-formed bone was also abundant in the crestal zone, not only in the apical part of the implants. Conclusions: A thorough understanding of the microstructure of dental implant/soft and hard tissue interface will improve the longevity of osseointegrated implants.

Hard and soft tissue surgical complications in dental implantology.

Science.gov (United States)

Aziz, Shahid R

2015-05-01

This article discusses surgical complications associated with the placement of dental implants, specifically focusing on how they occur (etiology), as well as their management and prevention. Dental implant surgical complications can be classified into those of hard and soft tissues. In general, complications can be avoided with thorough preoperative treatment planning and proper surgical technique. Copyright © 2015 Elsevier Inc. All rights reserved.

Dental-derived Stem Cells and whole Tooth Regeneration: an Overview

OpenAIRE

Dannan, Aous

2009-01-01

The need for new dental tissue-replacement therapies is evident in recent reports which reveal startling statistics regarding the high incidence of tooth decay and tooth loss. Recent advances in the identification and characterization of dental stem cells, and in dental tissue-engineering strategies, suggest that bioengineering approaches may successfully be used to regenerate dental tissues and whole teeth. Interest in dental tissue-regeneration applications continues to increase as clinical...

Detection for demineralization of dental hard tissues using index-sequenced radiographs

International Nuclear Information System (INIS)

Park, Dong Hyun; Park, Young Ho; Kim, Kyung Sook; Park, Jeong Hoon; Lee, Gi Ja; Choi, Sam Jin; Park, Hun Kuk; Choi, Yong Suk; Hwang, Eui Hwan

2009-01-01

The purpose of this study was to develop the radiographic technique for detecting the demineralization which is known as indication of dental caries. This technique was based on the comparing of multiple radiographs which was irradiated by multiple X-ray spectra. For the meaningful comparing, the multiple radiographs were reconstructed to the dosimetrically consistent images using a standard material. The difference of resulting images of same target with multiple spectra represents the difference of response of material as regards the spectra. We have found about 10% of demineralization of dental hard tissues particularly in the proximal region through the analyzing of differences. Most intriguing thing in this investigation was that the method to analyze difference shows us to an anatomic structure of dental hard tissues even if absolute values of optical density were excluded during the procedures.

Detection for demineralization of dental hard tissues using index-sequenced radiographs

Energy Technology Data Exchange (ETDEWEB)

Park, Dong Hyun; Park, Young Ho; Kim, Kyung Sook; Park, Jeong Hoon; Lee, Gi Ja; Choi, Sam Jin; Park, Hun Kuk [Department of Biomedical Engineering, School of Medicine, KyungHee University, Seoul (Korea, Republic of); Choi, Yong Suk; Hwang, Eui Hwan [Department of Oral and Maxillofacial Radiology, Institute of Oral Biology, School of Dentistry, KyungHee University, Seoul (Korea, Republic of)

2009-06-15

The purpose of this study was to develop the radiographic technique for detecting the demineralization which is known as indication of dental caries. This technique was based on the comparing of multiple radiographs which was irradiated by multiple X-ray spectra. For the meaningful comparing, the multiple radiographs were reconstructed to the dosimetrically consistent images using a standard material. The difference of resulting images of same target with multiple spectra represents the difference of response of material as regards the spectra. We have found about 10% of demineralization of dental hard tissues particularly in the proximal region through the analyzing of differences. Most intriguing thing in this investigation was that the method to analyze difference shows us to an anatomic structure of dental hard tissues even if absolute values of optical density were excluded during the procedures.

Electrochemical removal of metallic implants from Technovit 9100 New embedded hard and soft tissues prior to histological sectioning.

Science.gov (United States)

Willbold, Elmar; Reebmann, Mattias; Jeffries, Richard; Witte, Frank

2013-11-01

Solid metallic implants in soft or hard tissues are serious challenges for histological processing. However, metallic implants are more frequently used in e.g. cardiovascular or orthopaedic therapies. Before clinical use, these devices need to be tested thoroughly in a biological environment and histological analysis of their biocompatibility is a major requirement. To allow the histological analysis of metallic implants in tissues especially in calcified hard tissues, we describe a method for embedding these tissues in the resin Technovit 9100 New and removing the metallic implants by electrochemical dissolution. With the combination of these two processes, we are able to achieve 5 μm thick sections from soft or hard tissues with a superior preservation of tissue architecture and especially the implant-tissue interface. These sections can be stained by classical stainings, immunohistochemical and enzymehistochemical as well as DNA-based staining methods.

Giant panda׳s tooth enamel: Structure, mechanical behavior and toughening mechanisms under indentation.

Science.gov (United States)

Weng, Z Y; Liu, Z Q; Ritchie, R O; Jiao, D; Li, D S; Wu, H L; Deng, L H; Zhang, Z F

2016-12-01

The giant panda׳s teeth possess remarkable load-bearing capacity and damage resistance for masticating bamboos. In this study, the hierarchical structure and mechanical behavior of the giant panda׳s tooth enamel were investigated under indentation. The effects of loading orientation and location on mechanical properties of the enamel were clarified and the evolution of damage in the enamel under increasing load evaluated. The nature of the damage, both at and beneath the indentation surfaces, and the underlying toughening mechanisms were explored. Indentation cracks invariably were seen to propagate along the internal interfaces, specifically the sheaths between enamel rods, and multiple extrinsic toughening mechanisms, e.g., crack deflection/twisting and uncracked-ligament bridging, were active to shield the tips of cracks from the applied stress. The giant panda׳s tooth enamel is analogous to human enamel in its mechanical properties, yet it has superior hardness and Young׳s modulus but inferior toughness as compared to the bamboo that pandas primarily feed on, highlighting the critical roles of the integration of underlying tissues in the entire tooth and the highly hydrated state of bamboo foods. Our objective is that this study can aid the understanding of the structure-mechanical property relations in the tooth enamel of mammals and further provide some insight on the food habits of the giant pandas. Copyright © 2016 Elsevier Ltd. All rights reserved.

The influence of parotid gland sparing on radiation damages of dental hard tissues.

Science.gov (United States)

Hey, Jeremias; Seidel, Johannes; Schweyen, Ramona; Paelecke-Habermann, Yvonne; Vordermark, Dirk; Gernhardt, Christian; Kuhnt, Thomas

2013-07-01

The aim of the present study was to evaluate whether radiation damage on dental hard tissue depends on the mean irradiation dose the spared parotid gland is subjected to or on stimulated whole salivary flow rate. Between June 2002 and October 2008, 70 patients with neck and cancer curatively irradiated were included in this study. All patients underwent dental treatment referring to the guidelines and recommendations of the German Society of Dental, Oral and Craniomandibular Sciences prior, during, and after radiotherapy (RT). During the follow-up period of 24 months, damages on dental hard tissues were classified according to the RTOG/EORTC guidelines. The mean doses (D(mean)) during spared parotid gland RT were determined. Stimulated whole saliva secretion flow rates (SFR) were measured before RT and 1, 6, 12, 24 months after RT. Thirty patients showed no carious lesions (group A), 18 patients developed sporadic carious lesions (group B), and 22 patients developed general carious lesions (group C). Group A patients received a D mean of 21.2 ± 11.04 Gy. Group B patients received a D(mean) of 26.5 ± 11.59 Gy and group C patients received a D(mean) of 33.9 ± 9.93 Gy, respectively. The D(mean) of group A was significantly lower than the D(mean) of group C (p dental hard tissue correlates with increased mean irradiation doses as well as decreased salivary flow rates. Parotid gland sparing resulting in a dose below 20 Gy reduces radiation damage on dental hard tissues, and therefore, the dose may act as a predictor for the damage to be expected.

Design and implementation of therapeutic ultrasound generating circuit for dental tissue formation and tooth-root healing.

Science.gov (United States)

Woon Tiong Ang; Scurtescu, C; Wing Hoy; El-Bialy, T; Ying Yin Tsui; Jie Chen

2010-02-01

Biological tissue healing has recently attracted a great deal of research interest in various medical fields. Trauma to teeth, deep and root caries, and orthodontic treatment can all lead to various degrees of root resorption. In our previous study, we showed that low-intensity pulsed ultrasound (LIPUS) enhances the growth of lower incisor apices and accelerates their rate of eruption in rabbits by inducing dental tissue growth. We also performed clinical studies and demonstrated that LIPUS facilitates the healing of orthodontically induced teeth-root resorption in humans. However, the available LIPUS devices are too large to be used comfortably inside the mouth. In this paper, the design and implementation of a low-power LIPUS generator is presented. The generator is the core of the final intraoral device for preventing tooth root loss and enhancing tooth root tissue healing. The generator consists of a power-supply subsystem, an ultrasonic transducer, an impedance-matching circuit, and an integrated circuit composed of a digital controller circuitry and the associated driver circuit. Most of our efforts focus on the design of the impedance-matching circuit and the integrated system-on-chip circuit. The chip was designed and fabricated using 0.8- ¿m high-voltage technology from Dalsa Semiconductor, Inc. The power supply subsystem and its impedance-matching network are implemented using discrete components. The LIPUS generator was tested and verified to function as designed and is capable of producing ultrasound power up to 100 mW in the vicinity of the transducer's resonance frequency at 1.5 MHz. The power efficiency of the circuitry, excluding the power supply subsystem, is estimated at 70%. The final products will be tailored to the exact size of teeth or biological tissue, which is needed to be used for stimulating dental tissue (dentine and cementum) healing.

Single-Tooth Morse Taper Connection Implant Placed in Grafted Site of the Anterior Maxilla: Clinical and Radiographic Evaluation

Directory of Open Access Journals (Sweden)

Francesco Guido Mangano

2014-01-01

Full Text Available The aim of this study was to achieve aesthetically pleasing soft tissue contours in a severely compromised tooth in the anterior region of the maxilla. For a right-maxillary central incisor with localized advanced chronic periodontitis a tooth extraction followed by reconstructive procedures and delayed implant placement was proposed and accepted by the patient. Guided bone regeneration (GBR technique was employed, with a biphasic calcium-phosphate (BCP block graft placed in the extraction socket in conjunction with granules of the same material and a resorbable barrier membrane. After 6 months of healing, an implant was installed. The acrylic provisional restoration remained in situ for 3 months and then was substituted with the definitive crown. This ridge reconstruction technique enabled preserving both hard and soft tissues and counteracting vertical and horizontal bone resorption after tooth extraction and allowed for an ideal three-dimensional implant placement. Localized severe alveolar bone resorption of the anterior maxilla associated with chronic periodontal disease can be successfully treated by means of ridge reconstruction with GBR and delayed implant insertion; the placement of an early-loaded, Morse taper connection implant in the grafted site was effective to create an excellent clinical aesthetic result and to maintain it along time.

Use of dentifrices to prevent erosive tooth wear: harmful or helpful?

Directory of Open Access Journals (Sweden)

Ana Carolina Magalhães

2014-01-01

Full Text Available Dental erosion is the loss of dental hard tissues caused by non-bacterial acids. Due to acid contact, the tooth surface becomes softened and more prone to abrasion from toothbrushing. Dentifrices containing different active agents may be helpful in allowing rehardening or in increasing surface resistance to further acidic or mechanical impacts. However, dentifrices are applied together with brushing and, depending on how and when toothbrushing is performed, as well as the type of dentifrice and toothbrush used, may increase wear. This review focuses on the potential harmful and helpful effects associated with the use of dentifrices with regard to erosive wear. While active ingredients like fluorides or agents with special anti-erosive properties were shown to offer some degree of protection against erosion and combined erosion/abrasion, the abrasive effects of dentifrices may increase the surface loss of eroded teeth. However, most evidence to date comes from in vitro and in situ studies, so clinical trials are necessary for a better understanding of the complex interaction of active ingredients and abrasives and their effects on erosive tooth wear.

2D beam hardening correction for micro-CT of immersed hard tissue

Science.gov (United States)

Davis, Graham; Mills, David

2016-10-01

Beam hardening artefacts arise in tomography and microtomography with polychromatic sources. Typically, specimens appear to be less dense in the center of reconstructions because as the path length through the specimen increases, so the X-ray spectrum is shifted towards higher energies due to the preferential absorption of low energy photons. Various approaches have been taken to reduce or correct for these artefacts. Pre-filtering the X-ray beam with a thin metal sheet will reduce soft energy X-rays and thus narrow the spectrum. Correction curves can be applied to the projections prior to reconstruction which transform measured attenuation with polychromatic radiation to predicted attenuation with monochromatic radiation. These correction curves can be manually selected, iteratively derived from reconstructions (this generally works where density is assumed to be constant) or derived from a priori information about the X-ray spectrum and specimen composition. For hard tissue specimens, the latter approach works well if the composition is reasonably homogeneous. In the case of an immersed or embedded specimen (e.g., tooth or bone) the relative proportions of mineral and "organic" (including medium and plastic container) species varies considerably for different ray paths and simple beam hardening correction does not give accurate results. By performing an initial reconstruction, the total path length through the container can be determined. By modelling the X-ray properties of the specimen, a 2D correction transform can then be created such that the predicted monochromatic attenuation can be derived as a function of both the measured polychromatic attenuation and the container path length.

Effects of Bristle Hardness & Duration of Manual Tooth brushing on Plaque Control

Directory of Open Access Journals (Sweden)

. Sunny

2017-03-01

plaque score was observed on increasing duration from 1 minute to 11/2 minute in subjects using hard bristle brush. Conclusion: Manual toothbrushes with hard bristles better remove plaque, but may also cause more soft tissue trauma compared to brushes with softer bristles.

Influence of uncontrolled diabetes mellitus on periodontal tissues during orthodontic tooth movement: a systematic review of animal studies

Directory of Open Access Journals (Sweden)

Shariq Najeeb

2017-02-01

Full Text Available Abstract Diabetes mellitus (DM may adversely affect periodontal tissues during orthodontic tooth movement (OTM. The aim of this review is to systematically analyze and review animal studies investigating the effect of DM on periodontal tissues during OTM. An electronic search was conducted via PubMed/Medline, Google Scholar, Embase, ISI Web of Knowledge, and Cochrane Central Register of Controlled Trials (CONTROL using the keywords “diabetes,” “orthodontics,” and “tooth movement” for studies published between January 2000 and August 2016. After elimination of duplicate items, the primary search resulted in 89 articles. After exclusion of irrelevant articles on the basis of abstract and title, full texts of 25 articles were read to exclude additional irrelevant studies. Seven animal studies were included in this review for qualitative analysis. When compared to healthy animals, more bone resorption and diminished bone remodeling were observed in diabetic animals in all studies. Furthermore, DM decreased the rate of OTM in one study, but in another study, DM accelerated OTM. DM may adversely affect bone remodeling and tooth movement during application of orthodontic forces. However, a number of potential sources of bias and deficiencies in methodology are present in studies investigating the association between OTM and DM. Hence, more long-term and well-designed studies are required before the exact mechanism and impact of DM on outcomes of orthodontic treatment is understood.

Lasers in Esthetic Dentistry: Soft Tissue Photobiomodulation, Hard Tissue Decontamination, and Ceramics Conditioning

Directory of Open Access Journals (Sweden)

Karen Müller Ramalho

2014-01-01

Full Text Available The increasing concern and the search for conservative dental treatments have resulted in the development of several new technologies. Low and high power lasers can be cited as one of these new technologies. Low power lasers act at cellular level leading to pain reduction, modulation of inflammation, and improvement of tissue healing. High power lasers act by increasing temperature and have the potential to promote microbial reduction and ablation of hard and soft tissues. The clinical application of both low and high power lasers requires specific knowledge concerning laser interaction with biological tissues, so that the correct irradiation protocol can be established. The present case report describes the clinical steps of two metal-ceramic crowns development in a 60-year-old patient. Three different laser wavelengths were applied throughout the treatment with different purposes: Nd:YAG laser (1,064 nm for dentin decontamination, diode (660 nm for soft tissue biomodulation, and Er:YAG laser (2,940 nm for inner ceramic surface conditioning. Lasers were successfully applied in the present case report as coadjutant in the treatment. This coadjutant technology can be a potential tool to assist treatment to reach the final success.

Regulation of proliferation in developing human tooth germs by MSX homeodomain proteins and cyclin-dependent kinase inhibitor p19INK4d.

Science.gov (United States)

Kero, Darko; Vukojevic, Katarina; Stazic, Petra; Sundov, Danijela; Mardesic Brakus, Snjezana; Saraga-Babic, Mirna

2017-10-02

Before the secretion of hard dental tissues, tooth germs undergo several distinctive stages of development (dental lamina, bud, cap and bell). Every stage is characterized by specific proliferation patterns, which is regulated by various morphogens, growth factors and homeodomain proteins. The role of MSX homeodomain proteins in odontogenesis is rather complex. Expression domains of genes encoding for murine Msx1/2 during development are observed in tissues containing highly proliferative progenitor cells. Arrest of tooth development in Msx knockout mice can be attributed to impaired proliferation of progenitor cells. In Msx1 knockout mice, these progenitor cells start to differentiate prematurely as they strongly express cyclin-dependent kinase inhibitor p19 INK4d . p19 INK4d induces terminal differentiation of cells by blocking the cell cycle in mitogen-responsive G1 phase. Direct suppression of p19 INK4d by Msx1 protein is, therefore, important for maintaining proliferation of progenitor cells at levels required for the normal progression of tooth development. In this study, we examined the expression patterns of MSX1, MSX2 and p19 INK4d in human incisor tooth germs during the bud, cap and early bell stages of development. The distribution of expression domains of p19 INK4d throughout the investigated period indicates that p19 INK4d plays active role during human tooth development. Furthermore, comparison of expression domains of p19 INK4d with those of MSX1, MSX2 and proliferation markers Ki67, Cyclin A2 and pRb, indicates that MSX-mediated regulation of proliferation in human tooth germs might not be executed by the mechanism similar to one described in developing tooth germs of wild-type mouse.

Parallel beam microradiography of dental hard tissue using synchrotron radiation and X-ray image magnification

International Nuclear Information System (INIS)

Takagi, S.; Chow, L.C.; Brown, W.E.; Dobbyn, R.C.; Kuriyama, M.

1984-01-01

A novel technique utilizing a highly parallel beam of monochromatic synchrotron radiation combined with X-ray image magnification has been used to obtain microradiographs of caries lesions in relatively thick tooth sections. Preliminary results reveal structural features not previously reported. This technique holds the promise of allowing one to follow the structural changes accompanying the formation, destruction and chemical repair of mineralized tissue in real time. (orig.)

Tooth movement and changes in periodontal tissue in response to orthodontic force in rats vary depending on the time of day the force is applied.

Science.gov (United States)

Miyoshi, K; Igarashi, K; Saeki, S; Shinoda, H; Mitani, H

2001-08-01

The purpose of this study was to investigate whether there are any differences in tooth movement or in the response of periodontal tissue to orthodontic force when the force is applied at different times of the day. One hundred 6-week-old male Wistar rats were divided into one control group without force application and three experimental groups based on the time of day the force was applied to the upper first molars. Animals in the whole-day group received force continuously throughout the experimental period, while animals in the light- and dark-period groups received force only during the light (07:00-19:00) or dark period (19:00-07:00), respectively. Tooth movement was measured using the occlusal view of a precise plaster model with a profile projector. Periodontal tissues were evaluated histologically. The time course of tooth movement varied among the groups. Tooth movement over 21 days in the whole-day and light-period groups was about twice that as in the dark-period group. The formation of new bone on the tension side in the whole-day and light-period groups was more than twice that as in the dark-period group. On the pressure side, more osteoclasts appeared on the alveolar bone in the whole-day and light-period groups than in the dark-period group. The light-period group showed less extensive hyalinization of the periodontal ligament (PDL) than the whole-day group. The area of root resorption on day 21 also varied among the groups. Interference by masticatory forces did not seem to be a principal cause of the decreased tooth movement in the dark-period group. These results indicate that there are considerable variations in tooth movement and in the response of periodontal tissue to orthodontic force when the force is applied at different times of the day in rats. The results suggest that diurnal rhythms in bone metabolism have important implications in orthodontic treatment.

Method and device for bio-impedance measurement with hard-tissue applications

International Nuclear Information System (INIS)

Guimerà, A; Calderón, E; Los, P; Christie, A M

2008-01-01

Bio-impedance measurements can be used to detect and monitor several properties of living hard-tissues, some of which include bone mineral density, bone fracture healing or dental caries detection. In this paper a simple method and hardware architecture for hard tissue bio-impedance measurement is proposed. The key design aspects of such architecture are discussed and a commercial handheld ac impedance device is presented that is fully certified to international medical standards. It includes a 4-channel multiplexer and is capable of measuring impedances from 10 kΩ to 10 MΩ across a frequency range of 100 Hz to 100 kHz with a maximum error of 5%. The device incorporates several user interface methods and a Bluetooth link for bi-directional wireless data transfer. Low-power design techniques have been implemented, ensuring the device exceeds 8 h of continuous use. Finally, bench test results using dummy cells consisting of parallel connected resistors and capacitors, from 10 kΩ to 10 MΩ and from 20 pF to 100 pF, are discussed

Method and device for bio-impedance measurement with hard-tissue applications.

Science.gov (United States)

Guimerà, A; Calderón, E; Los, P; Christie, A M

2008-06-01

Bio-impedance measurements can be used to detect and monitor several properties of living hard-tissues, some of which include bone mineral density, bone fracture healing or dental caries detection. In this paper a simple method and hardware architecture for hard tissue bio-impedance measurement is proposed. The key design aspects of such architecture are discussed and a commercial handheld ac impedance device is presented that is fully certified to international medical standards. It includes a 4-channel multiplexer and is capable of measuring impedances from 10 kOmega to 10 MOmega across a frequency range of 100 Hz to 100 kHz with a maximum error of 5%. The device incorporates several user interface methods and a Bluetooth link for bi-directional wireless data transfer. Low-power design techniques have been implemented, ensuring the device exceeds 8 h of continuous use. Finally, bench test results using dummy cells consisting of parallel connected resistors and capacitors, from 10 kOmega to 10 MOmega and from 20 pF to 100 pF, are discussed.

The caries environment: saliva, pellicle, diet, and hard tissue ultrastructure.

Science.gov (United States)

Hara, Anderson T; Zero, Domenick T

2010-07-01

The pathogenicity of the dental biofilm is modified by salivary and dietary factors, as well as by the characteristics of the tooth structure. The composition of the acquired pellicle can modify the mineral homeostasis of the tooth surfaces and the attachment of bacteria for the development of the biofilm. The substitution of sucrose from the diet by other less cariogenic sugars and/or sugar substitutes can contribute to reducing the pathogenicity of the biofilm. Saliva clears, dilutes, neutralizes, and buffers acids produced by the biofilm. In addition, saliva provides the biofilm/tooth structure with Ca(2+) PO(4)(3-) and F(-) ions, which can positively affect the equilibrium between demineralization-remineralization toward the remineralization and modify the susceptibility of the tooth structure to caries progression. Copyright 2010 Elsevier Inc. All rights reserved.

X-Ray pictures of the developmental anomalis of the hard dental tissue

International Nuclear Information System (INIS)

Cecetkova, A.; Ondrasovicova, J.

2008-01-01

Dental anomalies are rare lessions of the hard dental tissue. They are as symptoms varies of the syndromes. They are as follow: hyperdoncia, hypodoncia, oligodoncia, anodoncia, mesiodens, macrodoncia and microdoncia. All of the above anomalis are detected by X-ray diagnostics ( intraoral and extra-oral radiography ). (authors)

Three-dimensional evaluation of soft tissue changes in the orofacial region after tooth-borne and bone-borne surgically assisted rapid maxillary expansion

NARCIS (Netherlands)

Nada, R.M.; Loon, B. van; Maal, T.J.J.; Berge, S.J.; Mostafa, Y.A.; Kuijpers-Jagtman, A.M.; Schols, J.G.J.H.

2013-01-01

OBJECTIVES: This study seeks to three-dimensionally assess soft tissue changes in the orofacial region following tooth-borne and bone-borne surgically assisted rapid maxillary expansion (SARME). MATERIALS AND METHODS: This prospective cohort study included 40 skeletally mature patients with

A review of the effect of vital teeth bleaching on the mechanical properties of tooth enamel.

Science.gov (United States)

Elfallah, Hunida M; Swain, Michael V

2013-09-01

Tooth whitening is considered the easiest and most cost-effective procedure for treating tooth discoloration. Contemporary bleaching agents contain hydrogen peroxide as the active ingredient. It is either applied directly or produced from its precursor, carbamide peroxide. A review of the published literature was undertaken to investigate the potential adverse effects of whitening products on dental enamel, with a focus on its mechanical properties and the influence of various parameters on study outcomes. There appear to be considerable differences in opinion as to whether changes in mechanical properties occur as a result of tooth whitening. However, the mechanical property findings of those studies appear to be related to the load applied during the indentation tests. Most studies which used loads higher than 500mN to determine enamel hardness showed no effect of bleaching, whereas those using lower loads were able to detect hardness reduction in the surface layer of enamel. In conclusion, bleaching reduces the hardness of the enamel surface of enamel, and that is more readily detected with instrumented low load testing systems. This hardness reduction may arise due to degradation or denaturation of enamel matrix proteins by the peroxide oxidation.

Hard X-ray submicrometer tomography of human brain tissue at Diamond Light Source

Science.gov (United States)

Khimchenko, A.; Bikis, C.; Schulz, G.; Zdora, M.-C.; Zanette, I.; Vila-Comamala, J.; Schweighauser, G.; Hench, J.; Hieber, S. E.; Deyhle, H.; Thalmann, P.; Müller, B.

2017-06-01

There is a lack of the necessary methodology for three-dimensional (3D) investigation of soft tissues with cellular resolution without staining or tissue transformation. Synchrotron radiation based hard X-ray in-line phase contrast tomography using single-distance phase reconstruction (SDPR) provides high spatial resolution and density contrast for the visualization of individual cells using a standard specimen preparation and data reconstruction. In this study, we demonstrate the 3D characterization of a formalin-fixed paraffin-embedded (FFPE) human cerebellum specimen by SDPR at the Diamond-Manchester Imaging Branchline I13-2 (Diamond Light Source, UK) at pixel sizes down to 0.45 μm. The approach enables visualization of cerebellar layers (Stratum moleculare and Stratum granulosum), the 3D characterization of individual cells (Purkinje, stellate and granule cells) and can even resolve some subcellular structures (nucleus and nucleolus of Purkinje cells). The tomographic results are qualitatively compared to hematoxylin and eosin (H&E) stained histological sections. We demonstrate the potential benefits of hard X-ray microtomography for the investigations of biological tissues in comparison to conventional histology.

Hard X-ray submicrometer tomography of human brain tissue at Diamond Light Source

International Nuclear Information System (INIS)

Khimchenko, A; Bikis, C; Schulz, G; Hieber, S E; Deyhle, H; Thalmann, P; Müller, B; Zdora, M-C; Zanette, I; Vila-Comamala, J; Schweighauser, G; Hench, J

2017-01-01

There is a lack of the necessary methodology for three-dimensional (3D) investigation of soft tissues with cellular resolution without staining or tissue transformation. Synchrotron radiation based hard X-ray in-line phase contrast tomography using single-distance phase reconstruction (SDPR) provides high spatial resolution and density contrast for the visualization of individual cells using a standard specimen preparation and data reconstruction. In this study, we demonstrate the 3D characterization of a formalin-fixed paraffin-embedded (FFPE) human cerebellum specimen by SDPR at the Diamond-Manchester Imaging Branchline I13-2 (Diamond Light Source, UK) at pixel sizes down to 0.45 μm. The approach enables visualization of cerebellar layers ( Stratum moleculare and Stratum granulosum ), the 3D characterization of individual cells (Purkinje, stellate and granule cells) and can even resolve some subcellular structures (nucleus and nucleolus of Purkinje cells). The tomographic results are qualitatively compared to hematoxylin and eosin (H and E) stained histological sections. We demonstrate the potential benefits of hard X-ray microtomography for the investigations of biological tissues in comparison to conventional histology. (paper)

A color contrast aided density imaging technique to differentiate between dental hard tissues and its relevance

Directory of Open Access Journals (Sweden)

Devi Charan Shetty

2011-01-01

Full Text Available Aim: Radiographic interpretation of a disease requires knowledge about normal structures. The calcifying jaw diseases can range from radiolucent areas to varying degrees of calcification. Therefore, it is vital to differentiate radiographically between various hard tissues. Materials and Methods: We have illustrated the use of computed tomography scan to quantify the calcified structures as dentin and enamel in a case of ameloblastic fibro-odontoma. Results: The enamel, dentin and cementum showed different values. Conclusion: The "Dentascan" can be used to distinguish the hard tissues in a variety of calcifying diseases of jaws.

Age-related tooth wear differs between forest and savanna primates.

Directory of Open Access Journals (Sweden)

Jordi Galbany

Full Text Available Tooth wear in primates is caused by aging and ecological factors. However, comparative data that would allow us to delineate the contribution of each of these factors are lacking. Here, we contrast age-dependent molar tooth wear by scoring percent of dentine exposure (PDE in two wild African primate populations from Gabonese forest and Kenyan savanna habitats. We found that forest-dwelling mandrills exhibited significantly higher PDE with age than savanna yellow baboons. Mandrills mainly feed on large tough food items, such as hard-shell fruits, and inhabit an ecosystem with a high presence of mineral quartz. By contrast, baboons consume large amounts of exogenous grit that adheres to underground storage organs but the proportion of quartz in the soils where baboons live is low. Our results support the hypothesis that not only age but also physical food properties and soil composition, particularly quartz richness, are factors that significantly impact tooth wear. We further propose that the accelerated dental wear in mandrills resulting in flatter molars with old age may represent an adaptation to process hard food items present in their environment.

Hard tissue compatibility of natural hydroxyapatite/chitosan composite

International Nuclear Information System (INIS)

Tang Xiaojun; Gui Lai; Lue Xiaoying

2008-01-01

The natural hydroxyapatite/chitosan (NHC) composite is a new synthesized material. The aim of this experiment was to assess the bone tissue compatibility of this NHC composite in vivo. Twenty-four healthy New Zealand rabbits were included in this study. Of those, 20 were used as the experimental group and four as the control group. In the experimental group, animals receive a cranium defect procedure and NHC composite repair. In the control group, animals underwent the cranium defect procedure without NHC composite repair. At 1, 4, 12, 24, and 40 weeks after surgery, the animals were sacrificed and samples were taken and assessed by gross observation, three-dimensional (3D) computerized tomographic (CT) reconstruction, histology and scanning electron microscope. Our results showed that at 1 week after repairing the bone defect with the NHC composite in the experimental group, new bone appeared around the composite and matured gradually. At 24 weeks after surgery, there were little collagenous tissues present between the material and surrounding bones. At 40 weeks after surgery, new bone had grown into the mature bone and total osseointegration had occurred. In the control group, however, no bone defect healing was observed at 40 weeks after surgery. All these results of the present in vivo work suggest that the NHC composite has a good hard tissue biocompatibility and an excellent osteoconductivity. It is suitable for artificial bone implants and frame materials of tissue engineering.

Hard tissue compatibility of natural hydroxyapatite/chitosan composite

Energy Technology Data Exchange (ETDEWEB)

Tang Xiaojun; Gui Lai [Department of Cranio-maxillofacial Surgery, Plastic Surgery Hospital, Chinese Academy of Medical Sciences and Peking Union Medical College, 33 Ba-Da-Chu Road, Beijing, 100144 (China); Lue Xiaoying [State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096 (China)], E-mail: laiguiplastic@tom.com, E-mail: luxy@seu.edu.cn

2008-12-15

The natural hydroxyapatite/chitosan (NHC) composite is a new synthesized material. The aim of this experiment was to assess the bone tissue compatibility of this NHC composite in vivo. Twenty-four healthy New Zealand rabbits were included in this study. Of those, 20 were used as the experimental group and four as the control group. In the experimental group, animals receive a cranium defect procedure and NHC composite repair. In the control group, animals underwent the cranium defect procedure without NHC composite repair. At 1, 4, 12, 24, and 40 weeks after surgery, the animals were sacrificed and samples were taken and assessed by gross observation, three-dimensional (3D) computerized tomographic (CT) reconstruction, histology and scanning electron microscope. Our results showed that at 1 week after repairing the bone defect with the NHC composite in the experimental group, new bone appeared around the composite and matured gradually. At 24 weeks after surgery, there were little collagenous tissues present between the material and surrounding bones. At 40 weeks after surgery, new bone had grown into the mature bone and total osseointegration had occurred. In the control group, however, no bone defect healing was observed at 40 weeks after surgery. All these results of the present in vivo work suggest that the NHC composite has a good hard tissue biocompatibility and an excellent osteoconductivity. It is suitable for artificial bone implants and frame materials of tissue engineering.

Effect of Er,Cr:YSGG laser irradiation on bovine enamel surface during in-office tooth bleaching ex vivo.

Science.gov (United States)

Dionysopoulos, Dimitrios; Strakas, Dimitrios; Koliniotou-Koumpia, Eugenia; Koumpia, Effimia

2017-07-01

The aim of this in vitro study was to evaluate the effect of using Er,Cr:YSGG laser during in-office tooth bleaching on bovine enamel surface to evaluate the safety of this therapy on tooth tissues. Thirty-six enamel specimens were prepared from bovine incisors and divided into three groups: Group 1 specimens (control) received no bleaching treatment; Group 2 received a conventional in-office bleaching treatment (40 % H 2 O 2 ); Group 3 received laser-assisted bleaching procedure (40 % H 2 O 2 ) utilizing an Er,Cr:YSGG laser. The specimens were stored for 10 days after the bleaching treatment in artificial saliva. Vickers hardness was determined using a microhardness tester, and measurements for surface roughness were done using a VSI microscope. Three specimens for each experimental group were examined under SEM and mineral composition of the specimens was evaluated using EDS. Data were statistically analyzed using one-way ANOVA, Tukey's post hoc, Wilcoxon signed rank and Kruskal-Wallis tests (a = 0.05). The Vickers hardness of the enamel was reduced after in-office bleaching procedures (p  0.05), and no changes in mineral composition of the enamel were detected after in-office bleaching procedures (p > 0.05). The laser-assisted bleaching treatment with Er,Cr:YSGG laser did not influence the enamel surface compared to the conventional bleaching technique. The safety of the use of Er,Cr:YSGG laser during in-office tooth bleaching regarding the surface properties of the enamel was confirmed under in vitro conditions.

Comparative evaluation of tooth substance loss and its correlation with the abrasivity and chemical composition of different dentifrices.

Science.gov (United States)

Singh, Ram Prakash; Sharma, Sidhartha; Logani, Ajay; Shah, Naseem; Singh, Surendra

2016-01-01

In India, teeth cleaning with tooth powder is common in rural and semi-urban areas. These dentifrices may contain low-quality abrasives, which may have a deleterious effect on dental hard tissues. This study aims to evaluate the tooth substance loss caused by different dentifrices and to correlate it with chemical composition, size, and shape of abrasives used. An indigenously made automated machine was used for brushing the specimens. Sixty-four freshly extracted premolars were allocated to eight groups (n = 8). Colgate toothpaste was used as the control group. Each specimen was brushed in a vertical motion for 2½ h at 200 strokes/min with a constant applied load of 200 g corresponding to 6-month brushing. The difference in weight (pre- and post-brushing) was determined by an analytical weighing machine. Chemical analysis was done to determine the presence of iron oxide by Inductively Coupled Plasma Mass Spectrometry method. Shape and size of the abrasive particles was evaluated under scanning electron microscopy (SEM). One-way analysis of variance and Paired t-test were used to analyze the data. Tooth substance loss was maximum in the group brushed with red tooth powder, which was shown to contain the highest amount of iron oxide and also exhibited large, irregularly shaped abrasive particles under SEM. Tooth substance loss was documented to be correlated with chemical composition (iron oxide) and the size and shape of abrasive particles used in dentifrices.

Mesenchymal stem cell-mediated functional tooth regeneration in swine.

Directory of Open Access Journals (Sweden)

Wataru Sonoyama

2006-12-01

Full Text Available Mesenchymal stem cell-mediated tissue regeneration is a promising approach for regenerative medicine for a wide range of applications. Here we report a new population of stem cells isolated from the root apical papilla of human teeth (SCAP, stem cells from apical papilla. Using a minipig model, we transplanted both human SCAP and periodontal ligament stem cells (PDLSCs to generate a root/periodontal complex capable of supporting a porcelain crown, resulting in normal tooth function. This work integrates a stem cell-mediated tissue regeneration strategy, engineered materials for structure, and current dental crown technologies. This hybridized tissue engineering approach led to recovery of tooth strength and appearance.

Biologically Active Polycaprolactone/Titanium Hybrid Electrospun Nanofibers for Hard Tissue Engineering

DEFF Research Database (Denmark)

Barakat, Nasser A. M.; Sheikh, Faheem A.; Al-Deyab, Salem S.

2011-01-01

In this study, a novel strategy to improve the bioactivity of polycaprolactone nanofibers is proposed. Incorporation of pure titanium nanoparticles into polycaprolactone nanofibers strongly enhances the precipitation of bone-like apatite materials when the doped nanofibers are soaked in a simulat...... nanofiber mats and the successful incorporation of the titanium nanoparticles make the prepared polycaprolactone nanofiber mat a proper candidate for the hard-tissue engineering applications....

Determination of biomechanical characteristics of dentine and dental enamel in vitro

OpenAIRE

UTYUZH ANATOLIJ SERGEEVICH; YUMASHEV ALEKSEJ VALERIEVICH; ZAGORSKY VLADISLAV VALERIEVICH; ZAKHAROV ALEKSEJ NIKOLAEVICH; NEFEDOVA IRINA VALERIEVNA

2016-01-01

Hardness characteristics of the hard tissues of a tooth are widely used in dentistry practice, both in diagnostics and in therapy, they are also very important for individual selection of restoration and other specialized materials. During examination of enamel and dentine hardness, it is very important to handle information that beside its theoretical value also has high practical value. For this purpose, we suggest to calculate hardness of tooth tissue on the basis of quantitative indicator...

Differences of isolated dental stem cells dependent on donor age and consequences for autologous tooth replacement.

Science.gov (United States)

Kellner, Manuela; Steindorff, Marina M; Strempel, Jürgen F; Winkel, Andreas; Kühnel, Mark P; Stiesch, Meike

2014-06-01

Autologous therapy via stem cell-based tissue regeneration is an aim to rebuild natural teeth. One option is the use of adult stem cells from the dental pulp (DPSCs), which have been shown to differentiate into several types of tissue in vitro and in vivo, especially into tooth-like structures. DPSCs are mainly isolated from the dental pulp of third molars routinely extracted for orthodontic reasons. Due to the extraction of third molars at various phases of life, DPSCs are isolated at different developmental stages of the tooth. The present study addressed the question whether DPSCs from patients of different ages were similar in their growth characteristics with respect to the stage of tooth development. Therefore DPSCs from third molars of 12-30 year-old patients were extracted, and growth characteristics, e.g. doubling time and maximal cell division potential were analysed. In addition, pulp and hard dental material weight were recorded. Irrespective of the age of patients almost all isolated cells reached 40-60 generations with no correlation between maximal cell division potential and patient age. Cells from patients <22 years showed a significantly faster doubling time than the cells from patients ≥22 years. The age of patients at the time of stem cell isolation is not a crucial factor concerning maximal cell division potential, but does have an impact on the doubling time. However, differences in individuals regarding growth characteristics were more pronounced than age-dependent differences. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Study of methods of decalcification for making united slices of tooth and affiliated periodontic tissues].

Science.gov (United States)

Wang, Yu; Mu, Ya-bing; Miao, Lei-ying; Sun, Hong-chen; Li, Cheng-ku

2007-03-01

To study the methods of decalcification for making united slices of tooth and affiliated periodontic tissues. Twenty-one samples containing dog molars and affiliated periodontic tissues were divided into seven mean groups. The pH value of solution, time of decalcification, weight and volume of samples, and content of decalcified calcium were detected. The slices were observed by HE, specific, and immunohistochemical stain. The velocity of decalcification increased with decrease of solution pH. The weight of samples lightened by 37.61%, the volume reduced by 25.97% on average, and calcium decalcified was 174.49 mg per gram humid samples. The EDTA decalcification was slowest, but it was best. Decalcification was fast in Plank-Rycho solution while the section was worst, and faster in the formyl solution containing aluminium chloride than in EDTA, and the section was better. The 50% formyl solution containing aluminium chloride is an ideal decalcifying solution.

Detection of free radicals in γ-irradiated seasnail hard tissues by electron paramagnetic resonance

International Nuclear Information System (INIS)

Koeseoglu, Rahmi; Koeksal, Fevzi

2003-01-01

Gamma-irradiated seasnail (from family of Helix lukortium) hard tissues (CaCO 3 ) were investigated by electron paramagnetic resonance (EPR) at room temperature. The radicals produced by γ-irradiation in seasnail were attributed to orthorhombic C · O 2 - , freely rotating C · O 2 - , orthorhombic C · O 3 - , axial C · O 3 - , and axial C · O 3 3- free radicals. Unirradiated seasnail hard tissues also feature Mn 2+ ions in their EPR spectra. The hyperfine values were determined for the 13 C nucleus in the orthorhombic C · O 2 - and axial C · O 3 3- free radicals and for the manganese impurity ions. The g values of all the free radicals have been measured. The results were compared with the literature data for similar defects

Coordination of Cellular Dynamics Contributes to Tooth Epithelium Deformations

Science.gov (United States)

Morita, Ritsuko; Kihira, Miho; Nakatsu, Yousuke; Nomoto, Yohei; Ogawa, Miho; Ohashi, Kazumasa; Mizuno, Kensaku; Tachikawa, Tetsuhiko; Ishimoto, Yukitaka; Morishita, Yoshihiro; Tsuji, Takashi

2016-01-01

The morphologies of ectodermal organs are shaped by appropriate combinations of several deformation modes, such as invagination and anisotropic tissue elongation. However, how multicellular dynamics are coordinated during deformation processes remains to be elucidated. Here, we developed a four-dimensional (4D) analysis system for tracking cell movement and division at a single-cell resolution in developing tooth epithelium. The expression patterns of a Fucci probe clarified the region- and stage-specific cell cycle patterns within the tooth germ, which were in good agreement with the pattern of the volume growth rate estimated from tissue-level deformation analysis. Cellular motility was higher in the regions with higher growth rates, while the mitotic orientation was significantly biased along the direction of tissue elongation in the epithelium. Further, these spatio-temporal patterns of cellular dynamics and tissue-level deformation were highly correlated with that of the activity of cofilin, which is an actin depolymerization factor, suggesting that the coordination of cellular dynamics via actin remodeling plays an important role in tooth epithelial morphogenesis. Our system enhances the understanding of how cellular behaviors are coordinated during ectodermal organogenesis, which cannot be observed from histological analyses. PMID:27588418

Cellular and Molecular Changes in Orthodontic Tooth Movement

Science.gov (United States)

Zainal Ariffin, Shahrul Hisham; Yamamoto, Zulham; Zainol Abidin, lntan Zarina; Megat Abdul Wahab, Rohaya; Zainal Ariffin, Zaidah

2011-01-01

Tooth movement induced by orthodontic treatment can cause sequential reactions involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structures. To better understand the biological processes involved in orthodontic treatment, improve treatment, and reduce adverse side effects, several of these substances have been proposed as biomarkers. Potential biological markers can be collected from different tissue samples, and suitable sampling is important to accurately reflect biological processes. This paper covers the tissue changes that are involved during orthodontic tooth movement such as at compression region (involving osteoblasts), tension region (involving osteoclasts), dental root, and pulp tissues. Besides, the involvement of stem cells and their development towards osteoblasts and osteoclasts during orthodontic treatment have also been explained. Several possible biomarkers representing these biological changes during specific phenomenon, that is, bone remodelling (formation and resorption), inflammation, and root resorption have also been proposed. The knowledge of these biomarkers could be used in accelerating orthodontic treatment. PMID:22125437

Identification of a research protocol to study orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Annalisa Dichicco

2014-06-01

Full Text Available Aim: The orthodontic movement is associated with a process of tissue remodeling together with the release of several chemical mediators in periodontal tissues. Each mediator is a potential marker of tooth movement and expresses biological processes as: tissue inflammation and bone remodeling. Different amounts of every mediator are present in several tissues and fluids of the oral cavity. Therefore, there are different methods that allow sampling with several degrees of invasiveness. Chemical mediators are also substances of different molecular nature, and multiple kind of analysis methods allow detection. The purpose of this study was to draft the best research protocol for an optimal study on orthodontic movement efficiency. Methods: An analysis of the international literature have been made, to identify the gold standard of each aspect of the protocol: type of mediator, source and method of sampling and analysis method. Results: From the analysis of the international literature was created an original research protocol for the study and the assessment of the orthodontic movement, by using the biomarkers of the tooth movement. Conclusions: The protocol created is based on the choice of the gold standard of every aspect already analyzed in the literature and in existing protocols for the monitoring of orthodontic tooth movement through the markers of tooth movement. Clinical trials re required for the evaluation and validation of the protocol created.

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur.

Science.gov (United States)

Liu, Min; Reed, David A; Cecchini, Giancarlo M; Lu, Xuanyu; Ganjawalla, Karan; Gonzales, Carol S; Monahan, Richard; Luan, Xianghong; Diekwisch, Thomas G H

2016-01-01

Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here, we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids vs. snakes: (i) the orientation of replacement teeth compared to the major tooth axis, (ii) the occurrence of resorption pits, and (iii) the mode of tooth implantation/attachment to the tooth bearing element (TBE). The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as Heloderma. In

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur

Directory of Open Access Journals (Sweden)

Min eLiu

2016-05-01

Full Text Available Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids versus snakes: (i the orientation of replacement teeth compared to the major tooth axis, (ii the occurrence of resorption pits, and (iii the mode of tooth implantation/attachment to the tooth bearing element. The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as

Evaluation of the linearity of soft- to hard-tissue movement after orthognathic surgery

NARCIS (Netherlands)

Chew, Ming Tak; Sandham, John; Wong, Hwee Bee

2008-01-01

Introduction: Our aim in this study was to investigate whether a linear relationship exists between soft- to hard-tissue changes for both maxillary and mandibular landmarks over a wide range of skeletal changes. Methods: The sample consisted of 30 Chinese patients with Class III malocclusion treated

Evaluation of the linearity of soft- to hard-tissue movement after orthognathic surgery

NARCIS (Netherlands)

Chew, Ming Tak; Sandham, John; Wong, Hwee Bee

Introduction: Our aim in this study was to investigate whether a linear relationship exists between soft- to hard-tissue changes for both maxillary and mandibular landmarks over a wide range of skeletal changes. Methods: The sample consisted of 30 Chinese patients with Class III malocclusion treated

Interaction of a pulsed alexandrite laser with hard and soft biological tissue

Science.gov (United States)

Paterson, Lorna M.; Dickinson, Mark R.; King, Terence A.; Watts, David C.

1994-02-01

An alexandrite laser has been used in the fixed-Q and Q-switched modes, at the fundamental and frequency doubled wavelengths on a selection of hard and soft tissue. In an investigation into the potential use of the laser for the removal of deep lying lesions such as cutaneous vascular lesions and tatoos, studies have been carried out to characterize the depth and extent of the laser/tissue interaction in samples of tissue which greatly absorb the 750 nm radiation. The interaction of the laser radiation with extracted teeth was investigated looking at healthy enamel and dentine, and caries. Surface profile measurements of the enamel and dentine before and after irradiation show little physical effect of the laser irradiation, whereas caries appear to be ablated.

Ultrashort pulse laser processing of hard tissue, dental restoration materials, and biocompatibles

Science.gov (United States)

Yousif, A.; Strassl, M.; Beer, F.; Verhagen, L.; Wittschier, M.; Wintner, E.

2007-07-01

During the last few years, ultra-short laser pulses have proven their potential for application in medical tissue treatment in many ways. In hard tissue ablation, their aptitude for material ablation with negligible collateral damage provides many advantages. Especially teeth representing an anatomically and physiologically very special region with less blood circulation and lower healing rates than other tissues require most careful treatment. Hence, overheating of the pulp and induction of microcracks are some of the most problematic issues in dental preparation. Up till now it was shown by many authors that the application of picosecond or femtosecond pulses allows to perform ablation with very low damaging potential also fitting to the physiological requirements indicated. Beside the short interaction time with the irradiated matter, scanning of the ultra-short pulse trains turned out to be crucial for ablating cavities of the required quality. One main reason for this can be seen in the fact that during scanning the time period between two subsequent pulses incident on the same spot is so much extended that no heat accumulation effects occur and each pulse can be treated as a first one with respect to its local impact. Extension of this advantageous technique to biocompatible materials, i.e. in this case dental restoration materials and titanium plasma-sprayed implants, is just a matter of consequence. Recently published results on composites fit well with earlier data on dental hard tissue. In case of plaque which has to be removed from implants, it turns out that removal of at least the calcified version is harder than tissue removal. Therefore, besides ultra-short lasers, also Diode and Neodymium lasers, in cw and pulsed modes, have been studied with respect to plaque removal and sterilization. The temperature increase during laser exposure has been experimentally evaluated in parallel.

The CuHBr laser in hard dental tissues

International Nuclear Information System (INIS)

Miyakawa, Walter

2004-01-01

In this work, it was verified the viability of characterization of laser-irradiated dental tissues in two extreme conditions: high and low absorption by the dental tissue. Comparison with light microscopy and scanning electronic microscopy revealed that these techniques are complementary each other: quantitative topographic information is directly extracted from the atomic force microscopy, while morphological aspects can be imaged by light microscopy or scanning electronic microscopy. A cavity generated by Cu-HyBrID laser in human dental enamel was also evaluated by atomic force microscopy. Structural and morphological differences between the fused and resolidified enamel from the cavity walls and the enamel from the natural tis sue were analyzed. A model, based on the Monte Carlo method described the propagation of CuHBr laser radiation and the absorbed energy distribution in dental tissues. Experimental measures with a CCD camera were used to semiquantitatively characterize the scattered light distribution in the tooth and they corroborated the model. It was observed that Rayleigh scattering and diffuse scattered radiation is predominant. The absorbed energy distribution map and the temperature variation along the beam propagation axis presented strong dependence with the absorption coefficient of the dental enamel and they cannot be deduced from the light distribution profile. The exposure time threshold for dental enamel melting and evaporation, irradiated by a specific condition of the green line of the Cu-HyBrID laser, was determined and a phenomenological model was discussed for the laser-matter interaction, based on pulse accumulation effect. Theoretical temperature calculations associated with experimental evidences strongly suggest that optical and thermal parameters should vary with temperature. The obtained exposure time threshold should correspond to the time necessary to the sample reach the critical temperature, at which the increase of absorption

A systematic review on soft-to-hard tissue ratios in orthognathic surgery part II: Chin procedures.

Science.gov (United States)

San Miguel Moragas, Joan; Oth, Olivier; Büttner, Michael; Mommaerts, Maurice Y

2015-10-01

Precise soft-to-hard tissue ratios in orthofacial chin procedures are not well established. The aim of this study was to determine useful soft-to-hard tissue ratios for planning the magnitude of sliding genioplasty (chin osteotomy), osseous chin recontouring and alloplastic chin augmentation. A systematic review of English and non-English articles using PubMed central, ProQuest Dissertations and Theses, Science Citation Index, Elsevier Science Direct Complete, Highwire Press, Springer Standard Collection, SAGE premier 2011, DOAJ Directory of Open Access Journals, Sweetswise, Free E-Journals, Ovid Lippincott Williams & Wilkins total Access Collection, Wiley Online Library Journals, and Cochrane Plus databases from their onset until July 2014. Additional studies were identified by searching the references. Search terms included soft tissue, ratios, genioplasty, mentoplasty, chin, genial AND advancement, augmentation, setback, retrusion, impaction, reduction, vertical deficit, widening, narrowing, and expansion. Study selection criteria were as follows: only academic publications; human patients; no reviews; systematic reviews or meta-analyses; no cadavers; no syndromic patients; no pathology at the chin or mandible region; only articles of level of evidence from I to IV; number of patients must be cited in the articles; hard-to-soft tissue ratios must be cited in the articles or at least are able to be calculated with the quantitative data available in the article; if all patients of one article have had bilateral sagittal split osteotomy (BSSO) performed along with chin osteotomy, there should be an independent group evaluation of the data concerning to the chin; and no restriction regarding the size of the group. Independent extraction of articles by two authors using predefined data fields, including study quality indicators (level of evidence). The search identified 22 articles. Eleven additional articles were found in their reference sections. Of these, two were

Assessing accumulated hard-tissue debris using micro-computed tomography and free software for image processing and analysis.

Science.gov (United States)

De-Deus, Gustavo; Marins, Juliana; Neves, Aline de Almeida; Reis, Claudia; Fidel, Sandra; Versiani, Marco A; Alves, Haimon; Lopes, Ricardo Tadeu; Paciornik, Sidnei

2014-02-01

The accumulation of debris occurs after root canal preparation procedures specifically in fins, isthmus, irregularities, and ramifications. The aim of this study was to present a step-by-step description of a new method used to longitudinally identify, measure, and 3-dimensionally map the accumulation of hard-tissue debris inside the root canal after biomechanical preparation using free software for image processing and analysis. Three mandibular molars presenting the mesial root with a large isthmus width and a type II Vertucci's canal configuration were selected and scanned. The specimens were assigned to 1 of 3 experimental approaches: (1) 5.25% sodium hypochlorite + 17% EDTA, (2) bidistilled water, and (3) no irrigation. After root canal preparation, high-resolution scans of the teeth were accomplished, and free software packages were used to register and quantify the amount of accumulated hard-tissue debris in either canal space or isthmus areas. Canal preparation without irrigation resulted in 34.6% of its volume filled with hard-tissue debris, whereas the use of bidistilled water or NaOCl followed by EDTA showed a reduction in the percentage volume of debris to 16% and 11.3%, respectively. The closer the distance to the isthmus area was the larger the amount of accumulated debris regardless of the irrigating protocol used. Through the present method, it was possible to calculate the volume of hard-tissue debris in the isthmuses and in the root canal space. Free-software packages used for image reconstruction, registering, and analysis have shown to be promising for end-user application. Copyright © 2014. Published by Elsevier Inc.

Proteomic analysis of human tooth pulp: proteomics of human tooth.

Science.gov (United States)

Eckhardt, Adam; Jágr, Michal; Pataridis, Statis; Mikšík, Ivan

2014-12-01

The unique pulp-dentin complex demonstrates strong regenerative potential, which enables it to respond to disease and traumatic injury. Identifying the proteins of the pulp-dentin complex is crucial to understanding the mechanisms of regeneration, tissue calcification, defense processes, and the reparation of dentin by dental pulp. The lack of knowledge of these proteins limits the development of more efficient therapies. The proteomic profile of human tooth pulp was investigated and compared with the proteome of human dentin and blood. The samples of tooth pulp were obtained from 5 sound permanent human third molars of 5 adults (n = 5). The extracted proteins were separated by 2-dimensional gel electrophoresis, analyzed by nano-liquid chromatography tandem mass spectrometry, and identified by correlating mass spectra to the proteomic databases. A total of 342 proteins were identified with high confidence, and 2 proteins were detected for the first time in an actual human sample. The identified tooth pulp proteins have a variety of functions: structural, catalytic, transporter, protease activity, immune response, and many others. In a comparison with dentin and blood plasma, 140 (pulp/dentin) shared proteins were identified, 37 of which were not observed in plasma. It can be suggested that they might participate in the unique pulp-dentin complex. This proteomic investigation of human tooth pulp, together with the previously published study of human dentin, is one of the most comprehensive proteome lists of human teeth to date. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Methods for the evaluation of caries preventing agents

NARCIS (Netherlands)

Herkströter, Franciscus Maria

1990-01-01

Dental caries, or tooth decay, is a pathological process of localized destruction of tooth tissues by micro-organisms present in the so-called plaque. The destruction, caused by acids formed in the plague,Ieads to mineral loss (demineralization) from the hard tissues. A demineralized tooth can also

Relative growth pattern and hard tissue of vertebral centra by microradiography of bluefin tuna

International Nuclear Information System (INIS)

Kubo, Y.; Asano, H.

1989-01-01

To clarify the growth feature and the structure of hard tissue, we studied the vertebral centrum of three species, bluefin tuna Thunnus thynnus, bigeye tuna T. obesus and skipjack Katsuwonus pelamis (BL: 44.2, 39.5 and 40.0cm respectively). We examined the ratio of cetrum length to diameter in each vertebral centrum and obtained the value of 0.9-1.3 in most centra among three species. This indicates that the examined species belong to the equivalent type of the relative growth pattern of vertebral centra. The hard tissue was observed by microradiography, with the longitudinal and cross sections (about 100 μm) cut through the center of notochordal pore. The major centra of the vertebral column were composed of characteristic simple structure like a cross, when seen in the microradiographs of cross sections. Microradiographs indicated that the bone has complicated canals with minute spaces like the bone cavities

The effect of gastric juice on the development of erosive changes in hard dental tissue

Directory of Open Access Journals (Sweden)

Stojšin Ivana

2014-01-01

Full Text Available Introduction. Gastroesophageal reflux disease (GERD is an esophageal disorder where the refluxed gastric contents enters first into the esophagus followed by the pharynx, oral cavity, larynx, airway and middle ear, causing a range of disorders and symptoms. Hydrochloric acid from the gastric contents is responsible for the demineralization of dental hard tissues and release of matrix metalloproteinase from the dentin. Objective. The aim of this study was to verify the SEM (scanning electron microscopy analysis of the surface enamel, the enamel-dentin border and dentine after the exposure of intact teeth to filtrate of gastric contents obtained during routine endoscopy. Methods. Material used in the research was 10 extracted human impacted third molars. The coronal part of the tooth was divided into two parts, and then the two halves of teeth were exposed to the filtrate of gastric juice obtained during routine gastroscopy, which had been frozen until the moment of the experiment initiation. All samples of teeth were immersed in the filtrate of the content at a temperature of 20°C for 60 minutes. The prepared samples were observed by the SEM in the area of the enamel, the enamel-dentin border and in the area of dentin at different magnification. Results. The SEM analysis showed that both enamel and dentin had a significant demineralization of these tissues. Enamel surface resembled a demineralization similar to that of acid conditioning before the application of composite restorations. The degree of mineralization was more intense towards the enamel - dentin border, and at this area the enamel prisms were not fully recognizable. The dentin had a complete loss of peritubular dentin, the entry points of the dentin tubules were expanded and intertubular dentin demineralization was also registered. Conclusion. SEM analysis showed a significant degree of destruction of enamel and dentin. Significant changes in the surface structure of enamel and

Hydrodynamic model for ultra-short pulse ablation of hard dental tissue

Energy Technology Data Exchange (ETDEWEB)

London, R.A.; Bailey, D.S.; Young, D.A.; Alley, W.E.; Feit, M.D.; Rubenchik, A.M. [Lawrence Livermore National Lab., CA (United States); Neev, J. [Beckman Laser Inst., Irvine, CA (United States)

1996-02-29

A computational model for the ablation of tooth enamel by ultra-short laser pulses is presented. The role of simulations using this model in designing and understanding laser drilling systems is discussed. Pulses of duration 300 fsec and intensity greater than 10{sup 12} W/cm{sup 2} are considered. Laser absorption proceeds via multi-photon initiated plasma mechanism. The hydrodynamic response is calculated with a finite difference method, using an equation of state constructed from thermodynamic functions including electronic, ion motion, and chemical binding terms. Results for the ablation efficiency are presented. An analytic model describing the ablation threshold and ablation depth is presented. Thermal coupling to the remaining tissue and long-time thermal conduction are calculated. Simulation results are compared to experimental measurements of the ablation efficiency. Desired improvements in the model are presented.

Establishing the soft and hard tissue area centers (centroids) for the skull and introducing a newnon-anatomical cephalometric line

International Nuclear Information System (INIS)

AlBalkhi, Khalid M; AlShahrani, Ibrahim; AlMadi, Abdulaziz

2008-01-01

The purpose of this study was to demonstrate how to establish the area center (centroid) of both the soft and hard tissues of the outline of the lateral cephalometric skull image, and to introduce the concept of a new non-anatomical centroid line. Lateral cephalometric radiographs, size 12 x 14 inch, of fifty seven adult subjects were selected based on their pleasant, balanced profile, Class I skeletal and dental relationship and no major dental malocclusion or malrelationship. The area centers (centroids) of both soft and hard tissue skull were practically established using a customized software computer program called the m -file . Connecting the two centers introduced the concept of a new non-anatomical soft and hard centroids line. (author)

Modern views on the pathogenesis of hard dental tissues and periodontium lesions and means of their treatment in children with chronic diseases of the gastrointestinal tract

Directory of Open Access Journals (Sweden)

Krupey V.Y.

2014-09-01

Full Text Available Changes in the mouth covity often reflect regularities of pathogenesis of a number of disease states, and primarily from the digestive tract. Therefore, the purpose of the study was to clarify pathogenesis of certain lesions of hard dental tissues and periodontal tissues in children with chronic diseases of the gastrointestinal tract and development of schemes for their treatment. The study observed 441 children aged from 7 to 15 years with dental caries and generalized chronic catarrhal gingivitis on the background of chronic gastritis and duodenitis, duodenal ulcer and malabsorption syndrome. All the children were divided into 2 groups - basic and comparison one. The study identified the most dan¬gerous and little-known way of pathogenesis, which passes through the general processes of reducing the production of various proteins (immune system and antiseptics, is a violation of the general and local resistance and, ultimately, mineral metabolism. Such disorders impair complete mineralization of tooth enamel, reduce optimal composition and properties of saliva stimulating glycolysis processes in oral cavity. Prevention of dental caries and generalized chronic catarrhal gingivitis in children with chronic pathology of the gastrointestinal tract is based on the use of developed therapeutic and prophylactic complex, which includes mucosal gel Kvertulin, probiotic Latsidofil and drug Calcium D.

Coupling image processing and stress analysis for damage identification in a human premolar tooth.

Science.gov (United States)

Andreaus, U; Colloca, M; Iacoviello, D

2011-08-01

Non-carious cervical lesions are characterized by the loss of dental hard tissue at the cement-enamel junction (CEJ). Exceeding stresses are therefore generated in the cervical region of the tooth that cause disruption of the bonds between the hydroxyapatite crystals, leading to crack formation and eventual loss of enamel and the underlying dentine. Damage identification was performed by image analysis techniques and allowed to quantitatively assess changes in teeth. A computerized two-step procedure was generated and applied to the first left maxillary human premolar. In the first step, dental images were digitally processed by a segmentation method in order to identify the damage. The considered morphological properties were the enamel thickness and total area, the number of fragments in which the enamel is chipped. The information retrieved by the data processing of the section images allowed to orient the stress investigation toward selected portions of the tooth. In the second step, a three-dimensional finite element model based on CT images of both the tooth and the periodontal ligament was employed to compare the changes occurring in the stress distributions in normal occlusion and malocclusion. The stress states were analyzed exclusively in the critical zones designated in the first step. The risk of failure at the CEJ and of crack initiation at the dentin-enamel junction through the quantification of first and third principal stresses, von Mises stress, and normal and tangential stresses, were also estimated. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Hard tissue formation of STRO-1-selected rat dental pulp stem cells in vivo.

NARCIS (Netherlands)

Yang, X.; Walboomers, X.F.; Beucken, J.J.J.P van den; Bian, Z.; Fan, M.; Jansen, J.A.

2009-01-01

The objective of this study was to examine hard tissue formation of STRO-1-selected rat dental pulp-derived stem cells, seeded into a calcium phosphate ceramic scaffold, and implanted subcutaneously in mice. Previously, STRO-1 selection was used to obtain a mesenchymal stem cell progenitor

CHANGES IN TOOTH HARD TISSUE MINERALI-ZATION AND BLOOD RHEOLOGY IN HEALTHY ADOLESCENTS AND THOSE WITH THYROID DYSFUNCTION.

Science.gov (United States)

Beriashvili, S; Nikolaishvili, M; Mantskava, M; Momtsemlidze, N; Franchuk, K

2016-11-01

Thyroid dysfunction causes spreading and development of caries in the teeth and changes in periodontal tissues. In addition, it causes changes in peripheral blood flow and mineralization, local transcapillary metabolism causes changes in blood rheology. There are only few works in this direction and, therefore, the purpose of our research was to find out how the mineralization and the rheological properties of blood are changed in lesion of periodontal tissue on a background of thyroid dysfunction. Accordingly, the stomatological study was conducted in 75 adolescents aged 12-18 years by the standard method, recommended by the World Health Organization. According to the study, 45 patients out of them suffered from thyroid dysfunction, in particular from hypothyroidism. The comparator group consisted of 30 children of the same age without endocrine abnormalities. By the gained results it is noted that in spite of different type lesions due to dental caries, the caries incidence and intensiveness is higher in children with hypothyroidism as compared to healthy children. Decrease in saliva excretion rate and increase in oral fluid viscosity was found in children with thyroid and endocrine diseases as compared to healthy children. In children with endocrine disorders concurrent increase in calcium content (1,43±0,08 mmol/l) and decrease in inorganic phosphate concentrations (4,54±0,15 mmol/l) is reliably established. In children with thyroid disfunction and while periodontal tissue pathology, rheological features are disordered more dramatically than in healthy children. Therefore, it can be said that the changes in the adolescents' thyroid function is one of the reasons for formation of periodontal tissue diseases.Therefore, at detecting even the first signs of the periodontal tissue diseases, it is desirable in adolescents to assess the thyroid functional condition, since it will be the precondition for effective treatment and management of dental disease, in

Tooth for a tooth: Tissue engineering made easy at dental chairside

Directory of Open Access Journals (Sweden)

Vandana Kharidhi Laxman

2017-01-01

Full Text Available Background: Stem cells are unspecialized, multipotent cells which can differentiate into different cell types. The human periodontal ligament encloses subpopulation of Periodontal Ligament Stem Cells (PDLSCs which are able to regenerate the periodontium by differentiating into various cells of PDL. Literature have shown the promising results of periodontal regeneration by exvivo cultured transplantation of PDLSCs into the osseous defects. Methods: Based on current literature on use of ex vivo culture and associated problems, a novel technique is being presented , Stem cell application in periodontal regeneration (SAI-PRT which uses autologous PDLSCs along with its niche adhering to extracted tooth root for direct application using gelatin sponge as scaffold in regeneration of intrabony periodontal defect bypassing ex-vivo culture. Results: The cases initiated under SAI-PRT protocol, and have shown excellent clinical and radiographic improvement in intrabony defect using direct transplant of autologous PDLSCs . Conclusions: SAI-PRT can be used for the treatment of periodontal osseous defects at chair side.

From stem to roots: Tissue engineering in endodontics

Science.gov (United States)

Kala, M.; Banthia, Priyank; Banthia, Ruchi

2012-01-01

The vitality of dentin-pulp complex is fundamental to the life of tooth and is a priority for targeting clinical management strategies. Loss of the tooth, jawbone or both, due to periodontal disease, dental caries, trauma or some genetic disorders, affects not only basic mouth functions but aesthetic appearance and quality of life. One novel approach to restore tooth structure is based on biology: regenerative endodontic procedure by application of tissue engineering. Regenerative endodontics is an exciting new concept that seeks to apply the advances in tissue engineering to the regeneration of the pulp-dentin complex. The basic logic behind this approach is that patient-specific tissue-derived cell populations can be used to functionally replace integral tooth tissues. The development of such ‘test tube teeth’ requires precise regulation of the regenerative events in order to achieve proper tooth size and shape, as well as the development of new technologies to facilitate these processes. This article provides an extensive review of literature on the concept of tissue engineering and its application in endodontics, providing an insight into the new developmental approaches on the horizon. Key words:Regenerative, tissue engineering, stem cells, scaffold. PMID:24558528

Human bone hardness seems to depend on tissue type but not on anatomical site in the long bones of an old subject.

Science.gov (United States)

Ohman, Caroline; Zwierzak, Iwona; Baleani, Massimiliano; Viceconti, Marco

2013-02-01

It has been hypothesised that among different human subjects, the bone tissue quality varies as a function of the bone segment morphology. The aim of this study was to assess and compare the quality, evaluated in terms of hardness of packages of lamellae, of cortical and trabecular bones, at different anatomical sites within the human skeleton. The contralateral six long bones of an old human subject were indented at different levels along the diaphysis and at both epiphyses of each bone. Hardness value, which is correlated to the degree of mineralisation, of both cortical and trabecular bone tissues was calculated for each indentation location. It was found that the cortical bone tissue was harder (+18%) than the trabecular one. In general, the bone hardness was found to be locally highly heterogeneous. In fact, considering one single slice obtained for a bone segment, the coefficient of variation of the hardness values was up to 12% for cortical bone and up to 17% for trabecular bone. However, the tissue hardness was on average quite homogeneous within and among the long bones of the studied donor, although differences up to 9% among levels and up to 7% among bone segments were found. These findings seem not to support the mentioned hypothesis, at least not for the long bones of an old subject.

The Effect of Arch Height and Material Hardness of Personalized Insole on Correction and Tissues of Flatfoot

Directory of Open Access Journals (Sweden)

Shonglun Su

2017-01-01

Full Text Available Flat foot is one of the common deformities in the youth population, seriously affecting the weight supporting and daily exercising. However, there is lacking of quantitative data relative to material selection and shape design of the personalized orthopedic insole. This study was to evaluate the biomechanical effects of material hardness and support height of personalized orthopedic insole on foot tissues, by in vivo experiment and finite element modeling. The correction of arch height increased with material hardness and support height. The peak plantar pressure increased with the material hardness, and these values by wearing insoles of 40° were apparently higher than the bare feet condition. Harder insole material results in higher stress in the joint and ligament stress than softer material. In the calcaneocuboid joint, the stress increased with the arch height of insoles. The material hardness did not apparently affect the stress in the ankle joints, but the support heights of insole did. In general, insole material and support design are positively affecting the correction of orthopedic insole, but negatively resulting in unreasonable stress on the stress in the joint and ligaments. There should be an integration of improving correction and reducing stress in foot tissues.

A study to evaluate cephalometric hard tissue profile of Tamil population for orthognathic surgery.

Science.gov (United States)

Nachiappan, S; Tharanikumar, S; Chandran, Ajay; Anusudha, P; Nandini, G D; Balasubramaniam, Murali

2015-08-01

The primary aim of this study is to compare, the cephalometric hard tissue profile values and analysis between Tamil and Caucasian population. The study also aims to create a better understanding in the facial proportions of Tamil Nadu population and to have better diagnosis and treatment planning for orthognathic surgery for Tamil population in Tamil Nadu.

A novel basalt fiber-reinforced polylactic acid composite for hard tissue repair.

Science.gov (United States)

Chen, Xi; Li, Yan; Gu, Ning

2010-08-01

A basalt fiber (BF) was, for the first time, introduced into a poly(l-lactic acid) (PLLA) matrix as innovative reinforcement to fabricate composite materials for hard tissue repair. Firstly, BF/PLLA composites and pure PLLA were produced by the methods of solution blending and freeze drying. The results showed that basalt fibers can be uniformly dispersed in the PLLA matrix and significantly improve the mechanical properties and hydrophilicity of the PLLA matrix. The presence of basalt fibers may retard the polymer degradation rate and neutralize the acid degradation from PLLA. Osteoblasts were cultured in vitro to evaluate the cytocompatibility of the composite. An MTT assay revealed that osteoblasts proliferated well for 7 days and there was little difference found in their viability on both PLLA and BF/PLLA films, which was consistent with the alkaline phosphatase (ALP) activity results. A fluorescent staining observation showed that osteoblasts grew well on the composites. SEM images displayed that osteoblasts tended to grow along the fiber axis. The formation of mineralized nodules was observed on the films by Alizarin red S staining. These results suggest that the presence of basalt fibers does not noticeably affect osteoblastic behavior and the designed composites are osteoblast compatible. It is concluded that basalt fibers, as reinforcing fibers, may have promising applications in hard tissue repair.

A novel basalt fiber-reinforced polylactic acid composite for hard tissue repair

International Nuclear Information System (INIS)

Chen Xi; Li Yan; Gu Ning

2010-01-01

A basalt fiber (BF) was, for the first time, introduced into a poly(l-lactic acid) (PLLA) matrix as innovative reinforcement to fabricate composite materials for hard tissue repair. Firstly, BF/PLLA composites and pure PLLA were produced by the methods of solution blending and freeze drying. The results showed that basalt fibers can be uniformly dispersed in the PLLA matrix and significantly improve the mechanical properties and hydrophilicity of the PLLA matrix. The presence of basalt fibers may retard the polymer degradation rate and neutralize the acid degradation from PLLA. Osteoblasts were cultured in vitro to evaluate the cytocompatibility of the composite. An MTT assay revealed that osteoblasts proliferated well for 7 days and there was little difference found in their viability on both PLLA and BF/PLLA films, which was consistent with the alkaline phosphatase (ALP) activity results. A fluorescent staining observation showed that osteoblasts grew well on the composites. SEM images displayed that osteoblasts tended to grow along the fiber axis. The formation of mineralized nodules was observed on the films by Alizarin red S staining. These results suggest that the presence of basalt fibers does not noticeably affect osteoblastic behavior and the designed composites are osteoblast compatible. It is concluded that basalt fibers, as reinforcing fibers, may have promising applications in hard tissue repair.

Pain and Tissue Damage in Response to Orthodontic Tooth Movement: Are They Correlated?

Science.gov (United States)

Cuoghi, Osmar A; Topolski, Francielle; de Faria, Lorraine P; de Mendonça, Marcos R

2016-09-01

To evaluate the correlation between pain and tissue damage in response to orthodontic tooth movement (OTM), such as hyalinization and external apical root resorption (EARR). The literature review was used as a methodological strategy, following the knowledge development process - constructivist (ProKnow-C). Study axes were defined and keywords that best represented each axis were selected. The terms were submitted to an adherence test and validation, resulting in 12 keyword combinations. Searches were carried out in the most representative databases for the selected terms, without restriction as for language or publication dates. Retrieved studies were filtered using the EndNote X6 program and classified according to analysis of title, abstract, and keywords. The final portfolio of articles was submitted to bibliometric and systematic analysis. A total of 1,091 studies were retrieved, out of which 719 were repeated and 335 were removed in the classification stage. A total of 37 articles remained in the final portfolio. Only one article was in line with the purpose of this study, indicating absence of correlation between pain and EARR in response to OTM. Further studies are necessary to confirm whether orthodontic pain might serve as a criterion for the use of appropriate mechanical forces, contributing to minimize tissue damage following OTM. This article presents a systematic literature review, in which scientific evidence of the correlation between pain and tissue damage during orthodontic movement was studied, providing a scientific answer for the following question: Is pain reported by patients associated with application of inappropriate orthodontic force? Thus, it aims at aiding the orthodontist in the definition of clinical parameters for the use of optimal orthodontic force.

Circumscribed Lipoatrophy of the Chin after Tooth Extraction

Directory of Open Access Journals (Sweden)

Uwe Wollina

2017-07-01

Full Text Available We describe the rare occurrence of circumscribed facial lipoatrophy after tooth extraction. Correction by minimal invasive esthetic techniques such as soft tissue fillers or autologous fat transfer is possible but was not warranted.

Tooth Wear Inclination in Great Ape Molars.

Science.gov (United States)

Knight-Sadler, Jordan; Fiorenza, Luca

2017-01-01

Primate dietary diversity is reflected in their dental morphology, with differences in size and shape of teeth. In particular, the tooth wear angle can provide insight into a species' ability to break down certain foods. To examine dietary and masticatory information, digitized polygon models of dental casts provide a basis for quantitative analysis of wear associated with tooth attrition. In this study, we analyze and compare the wear patterns of Pongo pygmaeus, Gorilla gorillagorilla and Pan troglodytes schweinfurthii lower molars, focusing on the degree of inclination of specific wear facets. The variation in wear angles appears to be indicative of jaw movements and the specific stresses imposed on food during mastication, reflecting thus the ecology of these species. Orangutans exhibit flatter wear angles, more typical of a diet consisting of hard and brittle foods, while gorillas show a wear pattern with a high degree of inclination, reflecting thus their more leafy diet. Chimpanzees, on the other hand, show intermediate inclinations, a pattern that could be related to their highly variable diet. This method is demonstrated to be a powerful tool for better understanding the relationship between food, mastication and tooth wear processes in living primates, and can be potentially used to reconstruct the diet of fossil species. © 2017 S. Karger AG, Basel.

Sea urchin tooth mineralization: Calcite present early in the aboral plumula

Science.gov (United States)

Stock, Stuart R.; Veis, Arthur; Xiao, Xianghui; Almer, Jonathan D.; Dorvee, Jason R.

2012-01-01

In both vertebrate bone, containing carbonated hydroxyapatite as the mineral phase, and in invertebrate hard tissue comprised of calcium carbonate, a popular view is that the mineral phase develops from a long-lived amorphous precursor which later transforms into crystal form. Important questions linked to this popular view are: When and where is the crystallized material formed, and is amorphous solid added subsequently to the crystalline substrate? Sea urchin teeth, in which the earliest mineral forms within isolated compartments, in a time and position dependent manner, allow direct investigation of the timing of crystallization of the calcite primary plates. Living teeth of the sea urchin Lytechinus variegatus, in their native coelomic fluid, were examined by high-energy synchrotron x-ray diffraction. The diffraction data show that calcite is present in the most aboral portions of the plumula, representing the very earliest stages of mineralization, and that this calcite has the same crystal orientation as in the more mature adoral portions of the same tooth. Raman spectroscopy of the aboral plumula confirms the initial primary plate mineral material is calcite and does not detect amorphous calcium carbonate; in the more mature adoral incisal flange, it does detect a broader calcite peak, consistent with two or more magnesium compositions. We hypothesize that some portion of each syncytial membrane in the plumula provides the information for nucleation of identically oriented calcite crystals that subsequently develop to form the complex geometry of the single crystal sea urchin tooth. PMID:22940703

DNA Methylation: A Frontier in Tooth Organogenesis and Developmental Dental Defects.

Science.gov (United States)

Wan, Mian; Li, Hongyu; Zhou, Yachuan; Du, Wei; Xu, Xin; Ye, Ling; Zhou, Xuedong; Zheng, Liwei

2018-01-01

Tooth development relies on interactions between epithelial and mesenchymal tissues, which are controlled by sophisticated networks of conserved signaling. The signaling networks regulating odontogenesis have been well characterized, but the epigenetic mechanisms underlying remain to be elucidated. In this review, we describe current researches regarding the control of various genes expression by DNA methylation during odontogenesis, summarize genomic mapping of DNA methylation in various stages of tooth formation and diverse dental tissues by high-throughput approaches, and highlight the roles of DNA methylation in odontogenesis. Researches on mammals have revealed that the genomic methylation, which occurs on cytosine residues, regulates certain genes transcription. Consequently, DNA methylation plays a crucial role in spatiotemporal organization of signaling pathways, and is essential for organogenesis. Recently, mounting evidence proves that methylation of genomes contributes to the spatiotemporal gene dynamics during odontogenesis. With emerging new technologies of mapping cytosine modifications in global genome, investigators are seeking an overall view of DNA methylome dynamics that characterize genetic information to manifest across incredibly varied tooth development stages, dental tissues, and developmental dental defects. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Treatment outcome of immediate, early and conventional single-tooth implants in the aesthetic zone : a systematic review to survival, bone level, soft-tissue, aesthetics and patient satisfaction

NARCIS (Netherlands)

den Hartog, Laurens; Huddleston Slater, James J. R.; Vissink, Arjan; Meijer, Henny J. A.; Raghoebar, Gerry M.

2008-01-01

den Hartog L, Huddleston Slater JJR, Vissink A, Meijer HJA, Raghoebar GM. Treatment outcome of immediate, early and conventional single-tooth implants in the aesthetic zone: a systematic review to survival, bone level, soft-tissue, aesthetics and patient satisfaction. J Clin Periodontol 2008; 35:

Autogenous tooth transplantation for replacing a lost tooth: case reports

Directory of Open Access Journals (Sweden)

Ji-Youn Kang

2013-02-01

Full Text Available The autogenous tooth transplantation is an alternative treatment replacing a missing tooth when a suitable donor tooth is available. It is also a successful treatment option to save significant amount of time and cost comparing implants or conventional prosthetics. These cases, which required single tooth extraction due to deep caries and severe periodontal disease, could have good results by transplanting non-functional but sound donor tooth to the extraction site.

Interactive effects of periodontitis and orthodontic tooth movement on dental root resorption, tooth movement velocity and alveolar bone loss in a rat model.

Science.gov (United States)

Kirschneck, Christian; Fanghänel, Jochen; Wahlmann, Ulrich; Wolf, Michael; Roldán, J Camilo; Proff, Peter

2017-03-01

Many adult orthodontic patients suffer from chronic periodontitis with recurrent episodes of active periodontal inflammation. As their number is steadily increasing, orthodontists are more and more frequently challenged by respective treatment considerations. However, little is currently known regarding interactive effects on undesired dental root resorption (DRR), tooth movement velocity, periodontal bone loss and the underlying cellular and tissue reactions. A total of 63 male Fischer344 rats were used in three consecutive experiments employing 21 animals each (A/B/C), randomly assigned to 3 experimental groups (n=7, 1/2/3), respectively: (A) CBCT; (B) histology/serology; (C) RT-qPCR-(1) control; (2) orthodontic tooth movement (OTM) of the first/second upper left molars (NiTi coil spring, 0.25N); (3) OTM with experimentally induced periodontitis (cervical silk ligature). After 14days of OTM, we quantified blood leukocyte level, DRR, osteoclast activity and relative gene expression of inflammatory and osteoclast marker genes within the dental-periodontal tissue as well as tooth movement velocity and periodontal bone loss after 14 and 28 days. The experimentally induced periodontal bone loss was significantly increased by concurrent orthodontic force application. Periodontal inflammation during OTM on the other hand significantly augmented the extent of DRR, relative expression of inflammatory/osteoclast marker genes, blood leukocyte level and periodontal osteoclast activity. In addition, contrary to previous studies, we observed a significant increase in tooth movement velocity. Although accelerated tooth movement would be favourable for orthodontic treatment, our results suggest that orthodontic interventions should only be performed after successful systematic periodontal therapy and paused in case of recurrent active inflammation. Copyright © 2016 Elsevier GmbH. All rights reserved.

Risk factors for tooth wear lesions among patients attending the dental clinic of a Nigerian Teaching Hospital, Benin City: A pilot study

Directory of Open Access Journals (Sweden)

Okeigbemen A Sunny

2015-01-01

Full Text Available Aims: This study was to evaluate the risk factors associated with tooth wear lesions in patients attending a dental clinic. Context: Tooth wear lesions entail the loss of dental hard tissues in the absence of caries or trauma. They include abrasion, attrition, and erosion. The etiology is often related to habits leading to insidious symptoms with similar presentations in both community and hospital patients. Materials and Methods: This cross-sectional study involved patients attending the outpatient dental clinic of a Nigerian Teaching Hospital over a 3-month period. A semi-structured questionnaire was used to elicit information from the respondents. Results: A total of 152 respondents aged 17–80 years and above, comprising 86 males (56.6%, and 66 females (43.3% constituted the study population. The Binis were the most represented 34.2%, followed by the Esans 21.1%, while the least represented were the Yorubas (6.6%. The occupations represented in this study include civil servants (30.3%, unskilled workers (23.7%, and non-medical professionals (7.9%. Tooth wear lesions were present in 55.3% of the respondents. Attrition accounted for 29.6%, Abrasion (11.8%, combination of attrition and abrasion (4.6%, and abfraction (2.0%. There was a statistically significant association between tooth wear lesions and age, occupation, sensitivity or pain, tooth cleaning aids, toothbrush texture brushing technique, intake of carbonated beverages, and method of intake. Conclusion: Tooth wear lesions such as attrition and abrasion were prevalent among the respondents in this hospital setting and, therefore, represent an important group of dental problems among this population. It is, therefore, important to direct the appropriate oral health awareness program for the prevention, early detection, and management of these conditions.

Effects of gamma radiation on hard dental tissues of albino rats: investigation by light microscopy.

Science.gov (United States)

El-Faramawy, Nabil; Ameen, Reham; El-Haddad, Khaled; El-Zainy, Medhat

2013-08-01

The present work aims at studying the effect of gamma radiation on the hard dental tissues. Eighty adult male albino rats with weights of about 250 g were used. The rats were irradiated at 0.2, 0.5, 1.0, 2.0, 4.0 and 6.0 Gy whole-body gamma doses. The effects on hard dental tissue samples were investigated after 48 h in histological and ground sections using light microscopy. Areas of acid phosphatase activity were detected using tartrate-resistant acid phosphatase (TRAP) stains. Observation of histological sections revealed disturbance in predentin thickness and odontoblastic layer as the irradiation dose increased. In cementum, widened cementocytes lacunae were occasionally detected even with low irradiated doses. On the other hand, relatively homogenous enamel was detected with darkened areas in enamel surface at doses over than 0.5 Gy. TRAP-positive cells were detected on the surface of the dentin of irradiated groups as well as cementum surface. Minimal detectable changes were observed in ground sections.

[Investigation on noncarious hard tissue lesions of teeth in teachers of one university in Shanghai municipality].

Science.gov (United States)

Chen, Yi-li; Zhang, Zhe-dan; Guo, Jian-qing; Zhu, Ya-ping; Wang, Qun; Gao, Ling-yu

2011-06-01

To investigate the condition of four kinds of noncarious hard tissue lesions of the teeth in teachers of one university in Shanghai municipality and provide guidance about oral health care. The table and the standard on oral health survey authorized by WHO were adopted, condition of four kinds of noncarious hard tissue lesions of teeth in 776 teachers of East China University of Science was investigated and analyzed using SPSS16.0 software package. The average wedge-shaped defect teeth was 5.54±3.87, the incidence was 30.41%, caries incidence of the first bicuspid was the highest(29.52%). The incidence of tetracycline pigmentation teeth was 3.09%, the incidence of enamel hypoplasia was 2.06%, and the incidence of dental fluorosis was 1.55%. The average wedge-shaped defect teeth is higher than the data over the country, the incidence of dental textural anomaly is lower. The behaviors of oral health care of university teachers in Shanghai municipality remains to be further strengthened.

Nonlinear scattering in hard tissue studied with ultrashort laser pulses

International Nuclear Information System (INIS)

Eichler, J.; Kim, B.M.

2002-01-01

The back-scattered spectrum of ultrashort laser pulses (800 nm, 0.2 ps) was studied in human dental and other hard tissues in vitro below the ablation threshold. Frequency doubled radiation (SHG), frequency tripled radiation and two-photon fluorescence were detected. The relative yield for these processes was measured for various pulse energies. The dependence of the SHG signal on probe thickness was determined in forward and back scattering geometry. SHG is sensitive to linear polarization of the incident laser radiation. SHG in human teeth was studied in vitro showing larger signals in dentin than in cementum and enamel. In carious areas no SHG signal could be detected. Possible applications of higher harmonic radiation for diagnostics and microscopy are discussed. (orig.)

Effect of four over-the-counter tooth-whitening products on enamel microhardness.

Science.gov (United States)

Majeed, A; Grobler, S R; Moola, M H; Oberholzer, T G

2011-10-01

This in vitro study evaluated the effect of four over-the-counter tooth-whitening products on enamel microhardness. Fifty enamel blocks were prepared from extracted human molar teeth. The enamel surfaces were polished up to 1200 grit fineness and the specimens randomly divided into five groups. Enamel blocks were exposed to: Rapid White (n=10); Absolute White (n=10); Speed White (n=10) and White Glo (n=10) whitening products, according to the manufacturers' instructions. As control, ten enamel blocks were kept in artificial saliva at 37 degrees C without any treatment. Microhardness values were obtained before exposure (baseline) and after 1, 7 and 14-day treatment periods using a digital hardness tester with a Vickers diamond indenter. Data were analysed using Wilcoxon Signed Rank Sum Test, one-way ANOVA and Tukey-Kramer Multiple Comparison Test (penamel microhardness. Speed White increased the microhardness of enamel, while White Glo and artificial saliva had no effect on hardness. Over-the-counter tooth-whitening products might decrease enamel microhardness depending on the type of product.

Microstructure and hardness of bovine enamel in roselle extract solution

Science.gov (United States)

Dame, M. T.; Noerdin, A.; Indrani, D. J.

2017-08-01

The aim of this study was to analyze the effect of roselle extract solution on the microstructure and hardness of bovine enamel. Ten bovine teeth and a 5% concentration of roselle extract solution were prepared. Immersions of each bovine tooth in roselle extract solution were conducted up to 60 minutes. The bovine enamel surface was characterized in hardness and microscopy. It was apparent that the initial hardness was 328 KHN, and after immersion in 15 and 60 min, the values decrease to 57.4 KHN and 11 KHN, respectively. Scanning electron microscopy (SEM) revealed changes in enamel rods after immersion in the roselle extract solution.

In vitro assessment of the composition and microhardness of hard tissues of oral cavity submitted to gamma irradiation

International Nuclear Information System (INIS)

Paredes, Wilber Edison Bernaola

2017-01-01

Clinical Radiotherapy is extremely important for the treatment of malignant lesions of the head and neck region, however, exposure to ionizing radiation can lead to systemic or local complications during and after radiation treatment. Among these immediate local complications are the oral cavity xerostomia and the consequent oral mucositis. Regarding late complications produced by radiation, tooth decay of radiation and osteoradionecrosis are included, which are considered dose-dependent lesions, with high incidence in recent decades and difficult to manage, although these appear after completion of treatment and under the influence of local factors. The methodology proposed in this study consists in evaluating the effect of gamma radiation after irradiation of the samples, using the dose used in patients suffering with head and neck cancer. The samples were obtained from human enamel and root dentin; and swine mandibular bone, which were previously polished, and then submitted to the analysis of the initial surface microhardness of all groups. Subsequently, the samples were irradiated in a dose rate of 4 Gy per day, completing a total dose of 72 Gy. Finally, the samples were submitted to surface microhardness analysis after irradiation, which presented statistically significant results from the Student t, ANOVA and Tukey statistical tests referred to the difference of the mean of the initial and final values of each study group with a significant value of p = 0.00 (<0.05). Regarding the morphological analysis in scanning electron microscopy (SEM), the deleterious effect of gamma irradiation was evidenced as structural cracks, breaks and superficial fractures of the analyzed tissues and the biochemical analysis by Attenuated Total Reflection technique using Fourier transform infrared spectroscopy (ATR - FTIR) showed degradation of inorganic components and denaturation of organic compounds; whereby, the effect of gamma irradiation on the hard tissues of the oral

Studies on the method for determination of fluoride concentration in rat hard tissues by neutron activation analysis using 20F

International Nuclear Information System (INIS)

Nakakura, Tadao

1991-01-01

Neutron activation analysis method (non disruptive analysis, short time period measurement) has been recognized as a high precision analysis of fluoride concentration in hard tissue. Heat neutron irradiation analysis using instrumental neutron activation analysis (INAA) method was used to investigate 20 F concentration. Results were as follows. F concentration in a dried material of hard tissue using INAA method can be fixed by measuring the 20 F's energy peak for 10 seconds after neutron irradiation under 1 x 10 n/cm 2 ·s for 10 seconds. Non responding time that is caused by short half reduction time of 20 F can be recovered enough by a revise calculation. Reproducibility of measured fluoride concentration using INAA method was well stabilized. Rat hard tissue which takes no fluoride can be determined fluoride concentration without sodium restriction. Femur fluoride concentrations using INAA method had significant correlation with conventional microdiffusion analysis method (r=0.997, regression line: Y=1.13X + 2.98). Increase of fluoride density in dentine of rat molars under growing period according to fluoride intake was 1/3 of femurs and mandibles. (author)

Tooth-bleaching procedures and their controversial effects: A literature review

Science.gov (United States)

Alqahtani, Mohammed Q.

2014-01-01

Aim This review article will help clinicians improve their understanding of the history of bleaching procedures, bleaching types, components, mechanisms, and their effects on soft tissue, tooth structures, resin composite, and bonding. Methods The controversial issues about bleaching procedures and their effects are reviewed. Additionally, the consequences of pre- and post-bleaching on the bonding potential of composite resin restorations to tooth structure are discussed. Conclusion The overall goal of the paper is to help reduce risks for patients. PMID:25408594

Clinical Evaluation of Periodontal Tissue Status in Prosthodontic Treatment of Patients with Partial Tooth Loss and Generalized Periodontitis

Directory of Open Access Journals (Sweden)

A. Kushlyk

2018-01-01

Full Text Available The problem of selection and application of dental prostheses in periodontal disease is especially relevant in case of severe generalized periodontitis, which is accompanied by mobile tooth removal resulting in overloading the periodontium of the remaining teeth as well as the increase in tooth mobility. Therefore, in generalized periodontitis, it is important to apply the method of direct dental prosthetic rehabilitation since, in case of partial tooth loss, it will prevent the development of generalized periodontitis complications. The objective of the research was to improve the effectiveness of combination therapy for patients with generalized periodontitis and partial tooth loss applying the developed method of direct fixed dental prosthetic rehabilitation based on the study of the periodontal status. Materials and methods. The study included 129 patients with general periodontitis, II-III degree and partial tooth loss over the age of 45 years. According to prosthodontic treatment, all the patients were divided into three groups: Group I consisted of 42 (20 women and 22 men patients who immediately after tooth extraction were rehabilitated with the application of direct plastic laminar immediate prosthesis and selective tooth grinding; permanent dental prosthetic rehabilitation was performed 6 weeks after tooth extraction; Group II included 43 (21 women and 22 men patients who underwent traditional permanent dental prosthetic rehabilitation using fixed dental bridges 6 weeks after mobile tooth removal and wound healing; Group III comprised 44 (21 women and 23 men patients who immediately after mobile tooth removal were rehabilitated with the application of direct fixed sectional dental bridge (Ukrainian patent UA 20995. 2007 Feb 15 and selective tooth grinding; permanent dental prosthetic rehabilitation was performed 6 months after tooth extraction. The control group consisted of 26 people with intact dentitions over the age of 45 years

Sea urchin tooth mineralization: calcite present early in the aboral plumula.

Science.gov (United States)

Stock, Stuart R; Veis, Arthur; Xiao, Xianghui; Almer, Jonathan D; Dorvee, Jason R

2012-11-01

In both vertebrate bone, containing carbonated hydroxyapatite as the mineral phase, and in invertebrate hard tissue comprised of calcium carbonate, a popular view is that the mineral phase develops from a long-lived amorphous precursor which later transforms into crystal form. Important questions linked to this popular view are: when and where is the crystallized material formed, and is amorphous solid added subsequently to the crystalline substrate? Sea urchin teeth, in which the earliest mineral forms within isolated compartments, in a time and position dependent manner, allow direct investigation of the timing of crystallization of the calcite primary plates. Living teeth of the sea urchin Lytechinus variegatus, in their native coelomic fluid, were examined by high-energy synchrotron X-ray diffraction. The diffraction data show that calcite is present in the most aboral portions of the plumula, representing the very earliest stages of mineralization, and that this calcite has the same crystal orientation as in the more mature adoral portions of the same tooth. Raman spectroscopy of the aboral plumula confirms the initial primary plate mineral material is calcite and does not detect amorphous calcium carbonate; in the more mature adoral incisal flange, it does detect a broader calcite peak, consistent with two or more magnesium compositions. We hypothesize that some portion of each syncytial membrane in the plumula provides the information for nucleation of identically oriented calcite crystals that subsequently develop to form the complex geometry of the single crystal sea urchin tooth. Copyright © 2012 Elsevier Inc. All rights reserved.

Ectopic Hard Tissue Formation by Odonto/Osteogenically In Vitro Differentiated Human Deciduous Teeth Pulp Stem Cells.

Science.gov (United States)

Kim, Seunghye; Song, Je Seon; Jeon, Mijeong; Shin, Dong Min; Kim, Seong-Oh; Lee, Jae Ho

2015-07-01

There have been many attempts to use the pulp tissue from human deciduous teeth for dentin or bone regeneration. The objective of this study was to determine the effects of odonto/osteogenic in vitro differentiation of deciduous teeth pulp stem cells (DTSCs) on their in vivo hard tissue-forming potential. DTSCs were isolated from extracted deciduous teeth using the outgrowth method. These cells were exposed to odonto/osteogenic stimuli for 4 and 8 days (Day 4 and Day 8 groups, respectively), while cells in the control group were cultured in normal medium. The in vitro differentiated DTSCs and the control DTSCs were transplanted subcutaneously into immunocompromised mice with macroporous biphasic calcium phosphate and sacrificed at 8 weeks post-implantation. The effect of odonto/osteogenic in vitro differentiation was evaluated using alkaline phosphatase (ALP) staining and quantitative reverse transcription polymerase chain reaction (RT-PCR). The in vivo effect was evaluated by qualitative RT-PCR, assessment of ALP activity, histologic analysis, and immunohistochemical staining. The amount of hard tissue was greater in Day 4 group than Day 8 group (p = 0.014). However, Day 8 group generated lamellar bone-like structure, which was immunonegative to anti-human dentin sialoprotein with significantly low expression level of DSPP compared with the control group (p = 0.008). This study demonstrates that odonto/osteogenic in vitro differentiation of DTSCs enhances the formation of bone-like tissue, instead of dentin-like tissue, when transplanted subcutaneously using MBCP as a carrier. The odonto/osteogenic in vitro differentiation of DTSCs may be an effective modification that enhances in vivo bone formation by DTSCs.

Growth type of vertebral centra and the hard tissue observed by microradiography of the rainbow trout

International Nuclear Information System (INIS)

Kubo, Y.; Asano, H.

1987-01-01

To clarify the growth feature and the structure of hard tissue, we studied the vertebral centrum of rainbow trout Salmo gairdneri, using three specimens (BL: 21.0, 29.0 and 40.0cm). We examined the ratio of centrum length to centrum diameter in each vertebral centrum and obtained the value of 0.8-1.0 in most centra. This indicates that the vertebral centra of rainbow trout belong to the so-called equivalent type. The hard tissue was observed by microradiography, with the longitudinal and cross sections (about 100 μm)cut through the center of notochordal pore. The microradiograph of thin section of centrurn differentiated serially and changed in pattern, but it is clear to sustain the specific characteristics. In longitudinal sections, the V-shaped part of bone was composed of structure like compact bone through the length of vertebral column. In cross sections, the notochordal pore was enclosed by the radial trabecular bones, the arrangement gradually turning toward the posterior centra like paired fans set opposite each other laterally

Repair Responses of Dental Pulp to Tooth Injury and Biological Properties of Dentin-pulp Complex

OpenAIRE

大島, 勇人; Ohshima, Hayato

2004-01-01

Regeneration-the creation of a new tissue after the original one has been lost-is the fundamental biological capability in an organism. Numerous organs are considered to contain stem cells referred to as adult stem cells, even in the adult. Adult stem cells can give rise to a limited set of adult tissue types. In the field of clinical dentistry, it is well-known that the dentin-pulp complex is capable of repair after tooth injuries such as tooth replantation/transplantation or restorative pro...

Periodontal CGRP contributes to orofacial pain following experimental tooth movement in rats.

Science.gov (United States)

Long, Hu; Liao, Lina; Gao, Meiya; Ma, Wenqiang; Zhou, Yang; Jian, Fan; Wang, Yan; Lai, Wenli

2015-08-01

Calcitonin-related gene peptide (CGRP) plays an important role in orofacial inflammatory pain. The aim of this study was to determine whether periodontal CGRP contributes to orofacial pain induced by experimental tooth movement in rats. Male Sprague-Dawley rats were used in this study. Closed coil springs were used to deliver forces. Rats were euthanized on 0d, 1d, 3d, 5d, 7d, and 14d following experimental tooth movement. Then, alveolar bones were obtained for immunostaining of periodontal tissues against CGRP. Two hours prior to euthanasia on each day, orofacial pain levels were assessed through rat grimace scale. CGRP and olcegepant (CGRP receptor antagonist) were injected into periodontal tissues to verify the roles of periodontal CGRP in orofacial pain induced by experimental tooth movement. Periodontal CGRP expression levels and orofacial pain levels were elevated on 1d, 3d, 5d, and 7d following experimental tooth movement. The two indices were significantly correlated with each other and fitted into a dose-response model. Periodontal administration of CGRP could elevate periodontal CGRP expressions and exacerbate orofacial pain. Moreover, olcegepant administration could decrease periodontal CGRP expressions and alleviate orofacial pain. Therefore, periodontal CGRP plays an important role in pain transmission and modulation following experimental tooth movement. We suggest that it may participate in a positive feedback aiming to amplify orofacial pain signals. Copyright © 2015 Elsevier B.V. All rights reserved.

Effect of cow and soy milk on enamel hardness of immersed teeth

Science.gov (United States)

Widanti, H. A.; Herda, E.; Damiyanti, M.

2017-08-01

Cow milk and soy milk have different mineral contents and this can affect the tooth remineralization process. The aim of this study was to determine the effect of cow and soy milk on immersed teeth after demineralization. Twenty-one specimens, of human maxillary premolars, were measured for enamel hardness before immersion and demineralization in orange juice. The teeth were divided into three groups (n = 7) with each group immersed in either distilled water, cow milk, or soy milk. There was a significant increase in enamel hardness in all groups (p Cow milk provided the highest increase in enamel hardness, of all the three groups, but was not able to restore the initial enamel hardness.

The induction of dentin bridge-like structures by constructs of subcultured dental pulp-derived cells and porous HA/TCP in porcine teeth.

Science.gov (United States)

Ando, Yusuke; Honda, Masaki J; Ohshima, Hayato; Tonomura, Akiko; Ohara, Takayuki; Itaya, Toshimitsu; Kagami, Hideaki; Ueda, Minoru

2009-02-01

The purpose of this study was to investigate dentin-bridge formation in teeth following the transplantation of dental pulp-derived cells seeded on hydroxyapatite/tricalcium phosphate (HA/TCP) scaffolds. The dental pulp tissues were removed from the extracted first molar teeth of miniature pigs and single cell populations were subcultured. Second-passage cells that had alkaline phosphatase activity were combined with scaffolds. Cell-scaffold constructs were placed in contact with the exposed pulp tissue. The dimensions of the exposed pulp site were approximately 1-2.5 mm in diameter and 2-3 mm in depth from the tooth surface. After placing the constructs, the tooth was restored with composite resin. Six weeks after transplantation, hard tissue formation was observed on the pulp tissue in histology. Dentinal tubule-like structures were observed in most of the hard tissue generated, and columnar cells, which showed positive immunoreactions with dentin sialoprotein (DSP) and heat shock protein (HSP)-25, were aligned beneath the hard tissues. When only scaffolds were placed on the pulp tissues, particles of hard tissue were formed, however dentinal tubule-like structures and odontoblasts were not observed despite the formation of hard tissue. In conclusion, the implantation of dental pulp constructs into pulp exposed stimulates the formation of calcified dentin-like structures.

Platelet-rich fibrin-mediated revitalization of immature necrotic tooth

Directory of Open Access Journals (Sweden)

Navin Mishra

2013-01-01

Full Text Available Contemporary studies have shown that the regeneration of tissues and root elongation is possible in necrotic immature permanent teeth. The purpose of this case report is to add a new vista in regenerative endodontic therapy by using platelet rich fibrin for revitalization of immature non vital tooth. An 11year old boy with the history of trauma was diagnosed with the pulpal necrosis and symptomatic apical periodontitis in tooth #21. Intra oral periapical radiograph showed open apex and associated immature supernumerary tooth with respect to tooth #21. Access preparation and minimal instrumentation was done to remove necrotic debris under copious irrigation with 2.5% sodium hypochlorite. Triple antibiotic paste was packed in the canal for four weeks. During second visit, 5 mL of whole blood was drawn from the medial cubital vein of the patient and blood was then subjected to centrifugation at 2400 rpm for 12 minutes for the preparation of Platelet rich fibrin (PRF utilizing Choukroun′s method. Triple antibiotic paste was removed and canal was dried. PRF clot was pushed to the apical region of tooth #21 using hand pluggers. Three milimetres of Mineral trioxide (MTA was placed in cervical part of the root canal and permanent restoration was done three days later. Clinical examination at 6 and 12 months revealed no sensitivity to percussion and palpation in tooth #21and it responded positively to both electric pulp and cold tests. Radiographic examination showed resolution of periapical rarefaction, further root development and apical closure of the tooth #21 and its associated supernumerary tooth. On the basis of successful outcome of the present case it can be stated that PRF clot may serve as a scaffold for regeneration of necrotic immature teeth.

Magnetic resonance imaging of intraoral hard and soft tissues using an intraoral coil and FLASH sequences

Energy Technology Data Exchange (ETDEWEB)

Fluegge, Tabea; Eisenbeiss, Anne-Kathrin; Schmelzeisen, Rainer; Nelson, Katja [University Medical Center Freiburg, Department of Oral and Maxillofacial Surgery, Freiburg (Germany); Hoevener, Jan-Bernd; Ludwig, Ute; Hennig, Juergen [University Medical Center Freiburg, Medical Physics, Department of Radiology, Freiburg (Germany); Spittau, Bjoern [Albert Ludwig University of Freiburg, Institute of Anatomy and Cell Biology, Freiburg (Germany)

2016-12-15

To ascertain the feasibility of MRI as a non-ionizing protocol for routine dentomaxillofacial diagnostic imaging. Wireless coils were used for MRI of intraoral hard and soft tissues. FLASH MRI was applied in vivo with a mandible voxel size of 250 x 250 x 500 μm{sup 3}, FOV of 64 x 64 x 28 mm{sup 3} and acquisition time of 3:57 min and with a maxilla voxel size of 350 μm{sup 3} and FOV of 34 cm{sup 3} in 6:40 min. Ex vivo imaging was performed in 4:38 min, with a resolution of 200 μm{sup 3} and FOV of 36.5 cm{sup 3}. Cone beam (CB) CT of the mandible and subjects were acquired. MRI was compared to CBCT and histological sections. Deviations were calculated with intraclass correlation coefficient (ICC) and coefficient of variation (c{sub v}). A high congruence between CBCT, MRI and specimens was demonstrated. Hard and soft tissues including dental pulp, periodontium, gingiva, cancellous bone and mandibular canal contents were adequately displayed with MRI. Imaging of select intraoral tissues was achieved using custom MRI protocols with an easily applicable intraoral coil in a clinically acceptable acquisition time. Comparison with CBCT and histological sections helped demonstrate dimensional accuracy of the MR images. The course of the mandibular canal was accurately displayed with CBCT and MRI. (orig.)

Magnetic resonance imaging of intraoral hard and soft tissues using an intraoral coil and FLASH sequences

International Nuclear Information System (INIS)

Fluegge, Tabea; Eisenbeiss, Anne-Kathrin; Schmelzeisen, Rainer; Nelson, Katja; Hoevener, Jan-Bernd; Ludwig, Ute; Hennig, Juergen; Spittau, Bjoern

2016-01-01

To ascertain the feasibility of MRI as a non-ionizing protocol for routine dentomaxillofacial diagnostic imaging. Wireless coils were used for MRI of intraoral hard and soft tissues. FLASH MRI was applied in vivo with a mandible voxel size of 250 x 250 x 500 μm 3 , FOV of 64 x 64 x 28 mm 3 and acquisition time of 3:57 min and with a maxilla voxel size of 350 μm 3 and FOV of 34 cm 3 in 6:40 min. Ex vivo imaging was performed in 4:38 min, with a resolution of 200 μm 3 and FOV of 36.5 cm 3 . Cone beam (CB) CT of the mandible and subjects were acquired. MRI was compared to CBCT and histological sections. Deviations were calculated with intraclass correlation coefficient (ICC) and coefficient of variation (c v ). A high congruence between CBCT, MRI and specimens was demonstrated. Hard and soft tissues including dental pulp, periodontium, gingiva, cancellous bone and mandibular canal contents were adequately displayed with MRI. Imaging of select intraoral tissues was achieved using custom MRI protocols with an easily applicable intraoral coil in a clinically acceptable acquisition time. Comparison with CBCT and histological sections helped demonstrate dimensional accuracy of the MR images. The course of the mandibular canal was accurately displayed with CBCT and MRI. (orig.)

DIET EFFECT ON TOOTH DECAY WITH INDEX KPE EVALUATION IN BLANSKO

OpenAIRE

VAŠÍČKOVÁ, Pavlína

2009-01-01

Regular development of our teeth is the result of reciprocal induction processes with continual development stages. The non-interrupted development of the organism is the basic precondition of healthy dental tissues. It is, therefore, necessary to be aware of the fact that everybody takes on full responsibility for their own health. If we want to have clean and healthy teeth without tooth ache, oulitis and other problems we must take proper dental care. Tooth decay is the most widespread dise...

Phase transformations in a human tooth tissue at the initial stage of caries.

Directory of Open Access Journals (Sweden)

Pavel Seredin

Full Text Available The aim of the paper is to study phase transformations in solid tissues of the human teeth during the development of fissure caries by Raman and fluorescence microspectroscopy. The study of the areas with fissure caries confirmed the assumption of the formation of a weak interaction between phosphate apatite enamel and organic acids (products of microorganisms. The experimental results obtained with by Raman microspectroscopy showed the formation of dicalcium phosphate dihydrate - CaHPO4-2H2O in the area of mural demineralization of carious fissure. A comparative analysis of structural and spectroscopic data for the intact and carious enamel shows that emergence of a more soluble phase - carbonate-substituted hydroxyapatite - is typical for the initial stage of caries. It is shown that microareas of dental hard tissues in the carious fissure due to an emerging misorientation of apatite crystals have a higher fluorescence yield than the area of the intact enamel. These areas can be easily detected even prior to a deep demineralization (white spot stage for the case of irreversibly changed organomineral complex and intensive removal of the mineral component.

Phase Transformations in a Human Tooth Tissue at the Initial Stage of Caries

Science.gov (United States)

Prutskij, Tatiana; Ippolitov, Yury

2015-01-01

The aim of the paper is to study phase transformations in solid tissues of the human teeth during the development of fissure caries by Raman and fluorescence microspectroscopy. The study of the areas with fissure caries confirmed the assumption of the formation of a weak interaction between phosphate apatite enamel and organic acids (products of microorganisms). The experimental results obtained with by Raman microspectroscopy showed the formation of dicalcium phosphate dihydrate - CaHPO4-2H2O in the area of mural demineralization of carious fissure. A comparative analysis of structural and spectroscopic data for the intact and carious enamel shows that emergence of a more soluble phase - carbonate-substituted hydroxyapatite - is typical for the initial stage of caries. It is shown that microareas of dental hard tissues in the carious fissure due to an emerging misorientation of apatite crystals have a higher fluorescence yield than the area of the intact enamel. These areas can be easily detected even prior to a deep demineralization (white spot stage) for the case of irreversibly changed organomineral complex and intensive removal of the mineral component. PMID:25901743

Vascular imaging with contrast agent in hard and soft tissues using microcomputed-tomography.

Science.gov (United States)

Blery, P; Pilet, P; Bossche, A Vanden-; Thery, A; Guicheux, J; Amouriq, Y; Espitalier, F; Mathieu, N; Weiss, P

2016-04-01

Vascularization is essential for many tissues and is a main requisite for various tissue-engineering strategies. Different techniques are used for highlighting vasculature, in vivo and ex vivo, in 2-D or 3-D including histological staining, immunohistochemistry, radiography, angiography, microscopy, computed tomography (CT) or micro-CT, both stand-alone and synchrotron system. Vascularization can be studied with or without a contrast agent. This paper presents the results obtained with the latest Skyscan micro-CT (Skyscan 1272, Bruker, Belgium) following barium sulphate injection replacing the bloodstream in comparison with results obtained with a Skyscan In Vivo 1076. Different hard and soft tissues were perfused with contrast agent and were harvested. Samples were analysed using both forms of micro-CT, and improved results were shown using this new micro-CT. This study highlights the vasculature using micro-CT methods. The results obtained with the Skyscan 1272 are clearly defined compared to results obtained with Skyscan 1076. In particular, this instrument highlights the high number of small vessels, which were not seen before at lower resolution. This new micro-CT opens broader possibilities in detection and characterization of the 3-D vascular tree to assess vascular tissue engineering strategies. © 2015 The Authors Journal of Microscopy © 2015 Royal Microscopical Society.

In vitro evaluation of the remineralizing effect of two different bioactive principles on bovine tooth enamel using X-Ray fluorescence

Energy Technology Data Exchange (ETDEWEB)

Calazans, F.S.; Miranda, M.S., E-mail: fecalazans@yahoo.com.br [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Fac. de Odontologia. Dept. de Dentistica; Santos, R.S.; Anjos, M.J. dos [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Inst. de Fisica Armando Dias Tavares. Dept. de Fisica Aplicada e Termodinamica; Assis, J.T. de [Universidade do Estado do Rio de Janeiro (UERJ), Nova Friburgo, RJ (Brazil). Inst. Politecnico

2013-08-15

Dental erosion, in general, can be interpreted as a situation of a chronic loss of dental hard tissue that is chemically etched away from the tooth surface by acid and/or chelation without bacterial involvement. Thus, if the erosion process takes place for a period of time, a cavity can be formed (caries lesion). A procedure for inhibiting the formation of erosion and enhance the remineralization process is to use chemical agents. However, the aim of this in vitro study was to evaluate the effects of remineralization on bovine enamel using the of X-ray fluorescence technique (XRF). We obtained 15 specimens (CP) whose were randomly divided into three groups with different treatments of the remineralization: Group 1 - Saliva, Group 2 - Fluoride and Group 3 - CG Tooth Mousse. All measurements of X-ray fluorescence were obtained using commercial equipment (Artax ® 200). The evaluated chemicals elements from the XRF spectra were P, Ca e Sr. The remineralization process was first evaluated using the Bonferroni test (α=0.05) for comparison of parametric average loss of P, Ca and Sr in each stage of treatment in the groups. Besides that, it was also used the t Student test (=(α=0.05) for comparison between means of different treatment groups. The results show that GC Tooth Mousse group was not effective in remineralization of bovine enamel subjected to erosive challenge in this study. Nevertheless, its performance was similar to saliva, and therefore inferior to fluoride. (author)

In vitro evaluation of the remineralizing effect of two different bioactive principles on bovine tooth enamel using X-Ray fluorescence

International Nuclear Information System (INIS)

Calazans, F.S.; Miranda, M.S.; Santos, R.S.; Anjos, M.J. dos; Assis, J.T. de

2013-01-01

Dental erosion, in general, can be interpreted as a situation of a chronic loss of dental hard tissue that is chemically etched away from the tooth surface by acid and/or chelation without bacterial involvement. Thus, if the erosion process takes place for a period of time, a cavity can be formed (caries lesion). A procedure for inhibiting the formation of erosion and enhance the remineralization process is to use chemical agents. However, the aim of this in vitro study was to evaluate the effects of remineralization on bovine enamel using the of X-ray fluorescence technique (XRF). We obtained 15 specimens (CP) whose were randomly divided into three groups with different treatments of the remineralization: Group 1 - Saliva, Group 2 - Fluoride and Group 3 - CG Tooth Mousse. All measurements of X-ray fluorescence were obtained using commercial equipment (Artax ® 200). The evaluated chemicals elements from the XRF spectra were P, Ca e Sr. The remineralization process was first evaluated using the Bonferroni test (α=0.05) for comparison of parametric average loss of P, Ca and Sr in each stage of treatment in the groups. Besides that, it was also used the t Student test (=(α=0.05) for comparison between means of different treatment groups. The results show that GC Tooth Mousse group was not effective in remineralization of bovine enamel subjected to erosive challenge in this study. Nevertheless, its performance was similar to saliva, and therefore inferior to fluoride. (author)

Comparative assessment of the interfacial soft and hard tissues investing implants and natural teeth in the macaque mandible.

Science.gov (United States)

Siar, Chong Huat; Toh, Chooi Gait; Romanos, Georgios E; Ng, Kok Han

2015-07-01

The aim of this study was to conduct a comparative qualitative and quantitative assessment of the interfacial soft and hard tissues investing implants and natural teeth. The test sample consisted of six adult healthy male Macaca fascicularis with three-unit splinted crowns, each crown supported by an Ankylos screw-shaped titanium implant. These implants were placed in the mandibular premolar-second molar region, one side by an immediate-loading (IL) and the other by delayed-loading (DL) protocol. The animals were sacrificed after 3 months of functional loading. Another two monkeys with natural dentition served as controls. Nondecalcified sections were prepared for assessment of optical intensities (OI) under a confocal laser scanning microscope. In both the test (IL and DL) and control, the soft tissue complexes demonstrated a highly fluorescent keratinized layer and diminished cytoplasmic and enhanced membranous fluorescence in the remaining epithelium. Peri-implant mucosa was further characterized by an intense fluorescence at the junctional epithelium-implant interface and in the stromal mononuclear infiltrate. Connective tissue contact and periodontal ligament were weakly fluorescent. In hard tissues, a high fluorescence was observed in peri-implant woven bone and along the implant-bone interface. Mean OI was significantly higher in peri-implant woven bone than around teeth (P  0.05). Present findings suggest that peri-implant woven bone is highly mineralized, while the peri-implant and gingival mucosa share structural similarities. Optical intensities of interfacial tissues investing implants and teeth are related to their biological properties.

Evaluation of Metal Ion Concentration in Hard Tissues of Teeth in Residents of Central Poland

Directory of Open Access Journals (Sweden)

Piotr Wychowanski

2017-01-01

Full Text Available Objectives. The aim of the study was an assessment of the content of trace elements in enamel and dentin of teeth extracted in patients residing in urban and agricultural areas of Poland. Methods. The study included 30 generally healthy patients with retained third molars. 65 samples of enamel and dentin from individuals living in urban areas and 85 samples of enamel and dentin from individuals living in agricultural areas were prepared. The content of manganese, lead, cadmium, and chromium in the studied enamel and dentin samples from retained teeth was determined by Graphite Furnace Atomic Absorption Spectrometry. In the process of statistical hypothesis testing, the level of significance was assumed at α=0.05. Results. A comparative analysis of the data showed that enamel and dentin of inhabitants of industrialized areas contain significantly higher amounts of lead and cadmium than hard tissues of teeth in residents of agricultural areas and comparable amounts of manganese and chromium. Significance. It appears that hard tissues of retained teeth may constitute valuable material for assessment of long-term environmental exposure to metal ions. The study confirms that the risk of exposure to heavy metals depends on the place of residence and environmental pollution.

Tooth anatomy

Science.gov (United States)

... whole tooth. This area is known as the "pulp" of the tooth. The jawbone is attached to ... JC, eds. Robbins and Cotran Pathologic Basis of Disease . 9th ed. Philadelphia, PA: Elsevier Saunders; 2015:chap ...

Esterase variation in Turkish white-toothed shrews (Crocidura: Record of a trimeric esterase

Directory of Open Access Journals (Sweden)

Tez C.

2009-01-01

Full Text Available This study focuses on esterase variation of the genus Crocidura in Turkey. A total of 248 white-toothed shrews were analyzed by means of cellulose acetate gel electrophoresis. Liver tissue and alfa naphthyl acetate were used to investigate esterase variation in Turkish white-toothed shrews. A different esterase banding pattern was found in one Crocidura individual. This phenotype had four anodally migrated bands on cellulose acetate gel. The Crocidura individual displaying the given phenotype was identified as Crocidura suaveolens. The different esterase banding pattern observed in this study is considered to be a result of the trimeric structure of esterase in the lesser white-toothed shrew (Crocidura suaveolens.

Can dead man tooth do tell tales? Tooth prints in forensic identification.

Science.gov (United States)

Christopher, Vineetha; Murthy, Sarvani; Ashwinirani, S R; Prasad, Kulkarni; Girish, Suragimath; Vinit, Shashikanth Patil

2017-01-01

We know that teeth trouble us a lot when we are alive, but they last longer for thousands of years even after we are dead. Teeth being the strongest and resistant structure are the most significant tool in forensic investigations. Patterns of enamel rod end on the tooth surface are known as tooth prints. This study is aimed to know whether these tooth prints can become a forensic tool in personal identification such as finger prints. A study has been targeted toward the same. In the present in-vivo study, acetate peel technique has been used to obtain the replica of enamel rod end patterns. Tooth prints of upper first premolars were recorded from 80 individuals after acid etching using cellulose acetate strips. Then, digital images of the tooth prints obtained at two different intervals were subjected to biometric conversion using Verifinger standard software development kit version 6.5 software followed by the use of Automated Fingerprint Identification System (AFIS) software for comparison of the tooth prints. Similarly, each individual's finger prints were also recorded and were subjected to the same software. Further, recordings of AFIS scores obtained from images were statistically analyzed using Cronbach's test. We observed that comparing two tooth prints taken from an individual at two intervals exhibited similarity in many cases, with wavy pattern tooth print being the predominant type. However, the same prints showed dissimilarity when compared with other individuals. We also found that most of the individuals with whorl pattern finger print showed wavy pattern tooth print and few loop type fingerprints showed linear pattern of tooth prints. Further more experiments on both tooth prints and finger prints are required in establishing an individual's identity.

Effects of applying anchovy (Stolephorus insularis) substrates on the microhardness of tooth enamel in Sprague-Dawley rats

Science.gov (United States)

Hendrik, Y. C.; Puspitawati, R.; Gunawan, H. A.

2017-08-01

Anchovies (Stolephorus insularis) contain high levels of fluor in the form of CaF2. The aim of this study is to analyze changes in tooth enamel microhardness after application of anchovy substrates by feeding or as a topical fluoridation material. An in vivo study of the lower left incisors of nine Sprague-Dawley rats was conducted. The sample was comprised of baseline and treatment groups, including feeding application, topical application, negative control feeding, and negative control topical groups. The treatment groups were given 5% anchovy substrates through feeding and topical applications. After treatment, tooth samples were extracted from each of the rats for examination, and statistical analyses were performed after determining hardness numbers for enamel surfaces using Vickers microhardness tester. Vickers hardness numbers (VHNs) for anchovy substrate application and consumption by feeding (440.3 ± 24.72) were higher than for the negative control (315.80 ± 17.51). VHNs for the topical application group were higher than for the negative control (347.28 ± 28.56) and for the feeding group. The use of anchovy as a fluoridation material in form of topical application is potentially an effective method for increasing the microhardness of the tooth enamel surface

Influence of lead injection on calcium-45 distribution in hard tissues of rats

International Nuclear Information System (INIS)

Sato, Makoto

1978-01-01

This study determines the relationship between calcium distribution in hard tissues and age. The distribution of calcium was examined by using calcium-45 as tracer. Further, influences of such environmental toxic heavy metals as lead, cadmium and mercury upon calcium metabolism were determined. According to checks performed on 3-week-old rats, calcium-45 distributions in hard tissues from 6 hours to 6 days after injection were greater in the following tissues in the order listed: femurs, incisors, molars. In 2-week-old rats, the calcium distributions throughout the body were about the same. In 3-week-old rats, however, they were graded in descending order from femur to incisors, and then to molars. In rats of 18 weeks or more, the distribution of calcium-45 in the femur decreased. A slow increase was noted in calcium-45 deposits in the incisors of rats of four or more weeks; this increase remained constant at a very low level in rats of more than eight weeks. Calcium-45 distribution in rats of 61 weeks of age was graded in this descending order: incisors, femurs, and molars. In the group injected with calcium-45 and lead acetate, calcium-45 distribution was significantly less in 3-week-old than in 3-month-old rats. The following are percentages of calcium-45 distribution in rats to which 100 mg/kg of lead (equivalent of 1/3 of LD 50 were injected, when 100-percent distribution is assumed for controls; 3-week-old rats: femur 48 percent, incisors 49 percent, and molars 40 percent, 3-month-old rats: femurs 73 percent, incisors 67 percent, and molars 71 percent. No difference was observed in calcium-45 uptake between rats to whom injections of cadmium and mercury equivalent to 1/3 of a dose of LD 50 had been administered and rats who received only a single injection of calcium-45. (auth.)

Osteoblast and osteoclast behaviors in the turnover of attachment bones during medaka tooth replacement.

Science.gov (United States)

Mantoku, Akiko; Chatani, Masahiro; Aono, Kazushi; Inohaya, Keiji; Kudo, Akira

2016-01-15

Tooth replacement in polyphyodont is a well-organized system for maintenance of homeostasis of teeth, containing the dynamic structural change in skeletal tissues such as the attachment bone, which is the supporting element of teeth. Histological analyses have revealed the character of tooth replacement, however, the cellular mechanism of how skeletal tissues are modified during tooth replacement is largely unknown. Here, we showed the important role of osteoblasts for controlling osteoclasts to modify the attachment bone during tooth replacement in medaka pharyngeal teeth, coupled with an osterix-DsRed/TRAP-GFP transgenic line to visualize osteoblasts and osteoclasts. In the turnover of the row of attachment bones, these bones were resorbed at the posterior side where most developed functional teeth were located, and generated at the anterior side where teeth were newly erupted, which caused continuous tooth replacement. In the cellular analysis, osteoclasts and osteoblasts were located at attachment bones separately, since mature osteoclasts were localized at the resorbing side and osteoblasts gathered at the generating side. To demonstrate the role of osteoclasts in tooth replacement, we established medaka made deficient in c-fms-a by TALEN. c-fms-a deficient medaka showed hyperplasia of attachment bones along with reduced bone resorption accompanied by a low number of TRAP-positive osteoclasts, indicating an important role of osteoclasts in the turnover of attachment bones. Furthermore, nitroreductase-mediated osteoblast-specific ablation induced disappearance of osteoclasts, indicating that osteoblasts were essential for maintenance of osteoclasts for the proper turnover. Taken together, our results suggested that the medaka attachment bone provides the model to understand the cellular mechanism for tooth replacement, and that osteoblasts act in the coordination of bone morphology by supporting osteoclasts. Copyright © 2015 Elsevier Inc. All rights reserved.

Regenerative endodontics as a tissue engineering approach: past, current and future.

Science.gov (United States)

Malhotra, Neeraj; Mala, Kundabala

2012-12-01

With the reported startling statistics of high incidence of tooth decay and tooth loss, the current interest is focused on the development of alternate dental tissue replacement therapies. This has led to the application of dental tissue engineering as a clinically relevant method for the regeneration of dental tissues and generation of bioengineered whole tooth. Although, tissue engineering approach requires the three main key elements of stem cells, scaffold and morphogens, a conductive environment (fourth element) is equally important for successful engineering of any tissue and/or organ. The applications of this science has evolved continuously in dentistry, beginning from the application of Ca(OH)(2) in vital pulp therapy to the development of a fully functional bioengineered tooth (mice). Thus, with advances in basic research, recent reports and studies have shown successful application of tissue engineering in the field of dentistry. However, certain practical obstacles are yet to be overcome before dental tissue regeneration can be applied as evidence-based approach in clinics. The article highlights on the past achievements, current developments and future prospects of tissue engineering and regenerative therapy in the field of endodontics and bioengineered teeth (bioteeth). © 2012 The Authors. Australian Endodontic Journal © 2012 Australian Society of Endodontology.

In vivo imaging of human oral hard and soft tissues by polarization-sensitive optical coherence tomography

Science.gov (United States)

Walther, Julia; Golde, Jonas; Kirsten, Lars; Tetschke, Florian; Hempel, Franz; Rosenauer, Tobias; Hannig, Christian; Koch, Edmund

2017-12-01

Since optical coherence tomography (OCT) provides three-dimensional high-resolution images of biological tissue, the benefit of polarization contrast in the field of dentistry is highlighted in this study. Polarization-sensitive OCT (PS OCT) with phase-sensitive recording is used for imaging dental and mucosal tissues in the human oral cavity in vivo. An enhanced polarization contrast of oral structures is reached by analyzing the signals of the co- and crosspolarized channels of the swept source PS OCT system quantitatively with respect to reflectivity, retardation, optic axis orientation, and depolarization. The calculation of these polarization parameters enables a high tissue-specific contrast imaging for the detailed physical interpretation of human oral hard and soft tissues. For the proof-of-principle, imaging of composite restorations and mineralization defects at premolars as well as gingival, lingual, and labial oral mucosa was performed in vivo within the anterior oral cavity. The achieved contrast-enhanced results of the investigated human oral tissues by means of polarization-sensitive imaging are evaluated by the comparison with conventional intensity-based OCT.

Investigations of soft and hard tissues in oral cavity by spectral domain optical coherence tomography

Science.gov (United States)

Madjarova, Violeta Dimitrova; Yasuno, Yoshiaki; Makita, Shuichi; Hori, Yasuaki; Voeffray, Jean-Baptiste; Itoh, Masahide; Yatagai, Toyohiko; Tamura, Masami; Nanbu, Toshiyuki

2006-02-01

Fourier Domain Optical Coherence Tomography (SD-OCT) systems for dental measurements are demonstrated. Two systems have been developed. The first system is fiber based Michelson interferometer with super luminescent diodes at 1310 nm and 100 nm FWHM as a light source. The sensitivity of the system was 106 dB with depth measurement range in air of 2.5 mm. The second systems is a fiber based Mach-Zehnder interferometer with wavelength scanning laser as light source at center wavelength of 1310 nm, wavelength range of 110 nm and scanning rate of 20 KHz. The sensitivity of the system is 112 dB and depth measurement range in air is 6 mm. Both systems can acquire real-time three dimensional (3-D) images in the range of several second. The systems were applied for early caries detection in tooth, for diagnostics of tooth condition after operational tooth treatment, and for diagnostics of the alveolar bone structure. In-vivo measurements were performed on two volunteers. The systems were able to detect discontinuities in tooth and resin filling after tooth treatment. In addition early carries lesion was detected in one of the volunteers. The 3-D profile of the alveolar bone was acquired for first time with non-contact method.

Acid and Alkaline Phosphatase Levels in GCF during Orthodontic Tooth Movement

Science.gov (United States)

Farahani, Mohammad; Safavi, Seyed Mohammadreza; Dianat, Omid; Khoramian Tusi, Somayeh; Younessian, Farnaz

2015-01-01

Statement of the Problem The present constituents of gingival crevicular fluid (GCF) can reflect the changes occurring in underlying tissues. Considering variety of biologic bone markers, alkaline phosphatase and acid phosphatase have been examined as bone turn over markers in orthodontic tooth movement. Purpose The current study designed in a longitudinal pattern to determine the changes of acid and alkaline phosphatase (ACP & ALP) in GCF during orthodontic tooth movement. Materials and Method An upper canines from twelve patients (mean age: 14±2 years) undergoing extraction orthodontic treatment for distal movement served as the test tooth (DC), and its contralateral (CC) and antagonist (AC) canines were used as controls. The CC was included in orthodontic appliance without orthodontic force; the AC was free from any orthodontic appliance. The GCF around the experimental teeth was harvested from mesial and distal tooth sites immediately before appliance placement (T0), and 14 (T2) and 28 days (T3) after it and ALP and ACP concentration were determined spectrophotometrically. Results ALP concentration was elevated significantly in DC and CC groups at days 14 and 28 compared with the AC. In DC group, the ALP was significantly greater in mesial sites than distal site, while no significant changes were found between both sites of CC. The peak level of ALP was observed in mesial sites of DC at T2. Regarding ACP, significant elevation of this enzyme was seen in DC group both in mesial and distal sites at T2 and T3. The peak level of this enzyme was seen at T2. Conclusion Monitoring simultaneous changes of ALP and ACP levels in GCF can reflect the tissue responses occur in periodontium during bone formation and bone resorption during orthodontic tooth movement, respectively. PMID:26535403

Tissue concentrations of four Taiwanese toothed cetaceans indicating the silver and cadmium pollution in the western Pacific Ocean.

Science.gov (United States)

Chen, Meng-Hsien; Zhuang, Ming-Feng; Chou, Lien-Siang; Liu, Jean-Yi; Shih, Chieh-Chih; Chen, Chiee-Young

2017-11-30

Muscle, lung, kidney and liver tissues of 45 bycatch and stranded cetaceans, including 14 Grampus griseus (Gg), 7 Kogia simus (Ks), 10 Lagenodelphis hosei (Lh), and 14 Stenella attenuata (Sa), were collected in the waters off Taiwan from 1994 to 1995, and from 2001 to 2012. Baseline concentrations (in μgg -1 dry weight) of the cetaceans were lung (<0.05)=muscle (<0.05)tissue concentrations in the toothed cetaceans are suggested. Marked high concentrations of Ag and Cd found in Gg and Lh are highly related to their squid-eating and deep diving habits. The highest ever recorded concentrations of liver-Ag and kidney-Cd were found in two Lh. These Taiwanese cetaceans indicate marked Ag and Cd pollution in the recent two decades in the western Pacific Ocean. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparative evaluation of surface topography of tooth prepared using erbium, chromium: Yttrium, scandium, gallium, garnet laser and bur and its clinical implications.

Science.gov (United States)

Verma, Mahesh; Kumari, Pooja; Gupta, Rekha; Gill, Shubhra; Gupta, Ankur

2015-01-01

Erbium, chromium: Yttrium, scandium, gallium, garnet (Er, Cr: YSGG) laser has been successfully used in the ablation of dental hard and soft tissues. It has been reported that this system is also useful for preparing tooth surfaces and etching, but no consensus exist in the literature regarding the advantage of lasers over conventional tooth preparation technique. Labial surfaces of 25 extracted human maxillary central incisors were divided into two halves. Right half was prepared with diamond bur and left half with Er, Cr; YSGG laser and a reduction of 0.3-0.5 mm was carried out. Topography of prepared surfaces of five teeth were examined under scanning electron microscope (SEM). The remaining samples were divided into 4 groups of 10 specimens each based on the surface treatment received: One group was acid etched and other was nonetched. Composite resin cylinders were bonded on prepared surfaces and shear bond strength was assessed using a universal testing machine. The SEM observation revealed that the laser prepared surfaces were clean, highly irregular and devoid of a smear layer. Bur prepared surfaces were relatively smooth but covered with smear layer. Highest bond strength was shown by laser prepared acid etched group, followed by bur prepared the acid etched group. The bur prepared nonacid etched group showed least bond strength. Er, Cr: YSGG laser can be used for preparing tooth and bond strength value achieved by laser preparation alone without surface treatment procedure lies in the range of clinical acceptability.

Patient satisfaction with single-tooth implant therapy in the esthetic zone

NARCIS (Netherlands)

den Hartog, Laurens; Meijer, Henny J. A.; Santing, Hendrik J.; Vissink, Arjan; Raghoebar, Gerry M.

2014-01-01

This prospective study assessed patient satisfaction before and after single-tooth implant therapy in the esthetic zone. Before implant therapy, patients wore an acrylic resin tissue-supported removable partial denture (RPD). A total of 153 patients were included. Self-administered questionnaires

The effect of medication on the rate of orthodontic tooth movement (Part 2: Mediators and other drugs

Directory of Open Access Journals (Sweden)

Amirhossein Mirhashemi

2015-07-01

Full Text Available Molecules produced in various diseased tissues or drugs and nutrients consumed regularly by patients, can reach the mechanically stressed paradental tissues through the circulation and interact with local target cells. The combined effect of mechanical forces and one or more of these agents may be inhibitory, additive or synergistic. The aim of this review was to outline the mechanisms of action and effects of some commonly used drugs on tissue remodeling and Orthodontic Tooth Movement (OTM. A review on the effects of medications and dietary supplements on the rate of experimental tooth movement was performed using Cochrane library, Embase and Medline (1980-2013. 63 articles were included in the review. 34 of them related to the effects of hormones and analgesics were evaluated in the first part of this review. The rest of them (29 articles were evaluated in the current review, but their interpretation was hindered by the variability in experimental design, magnitude of force applied during tooth movement and medication regimens. Vitamin D3 might enhance the pace of tooth movement, but dietary calcium and fluorides appear to reduce the rate of OTM. Bisphosphonates (BPNs are considered to have marked inhibitory effects on the rate of tooth movement. Nicotine and nitric oxide might effectively increase the speed of OTM. All drugs reviewed had therapeutic effects, as well as side effects, that may influence the cells targeted by orthodontic forces. Therefore, it is imperative that the orthodontist pays close attention to the drug consumption history of each and every patient, before and during the course of orthodontic treatment. When the use of drugs is revealed, their effects and side effects on tissue systems should be explored to determine their potential influence on the outcome of mechanotherapy.

Tooth bleaching using peroxide-containing agents: current status of safety issues.

Science.gov (United States)

Li, Y

1998-08-01

During the last 10 years, at-home tooth bleaching using peroxide-containing agents has quickly become well accepted. It is one of the most popular cosmetic dental procedures for whitening teeth. Although there are few disputes regarding their efficacy, concerns and debates have continued regarding the safety of peroxide-containing tooth bleaching agents. Potential carcinogenicity and genotoxicity of the peroxides used in bleaching agents are the two most persistent and controversial issues. This article reviews and discusses available information on carcinogenicity and genotoxicity of hydrogen peroxide and the potential risks associated with the use of peroxide-containing bleaching agents. Clinical studies reported after the 1996 international symposium on responses of oral tissues to peroxide-containing bleaching agents are also reviewed. Overall evidence supports the conclusion that the proper use of peroxide-containing at-home tooth bleaching agents is safe. However, potential adverse effects may occur in inappropriate applications, abuses, or the use of inappropriate products. At-home tooth bleaching should be monitored by dental professionals to maximize the benefits while minimizing potential risks.

The Role of Mechanical Force in Molecular and Cellular during Orthodontic Tooth Movement

Directory of Open Access Journals (Sweden)

Ida Bagus Narmada

2012-10-01

Full Text Available Application of mechanical force on abnormally positioned tooth, cause changes in tooth location and transmitted to the bone ia the periodontal ligament (PDL produce orthodontic tooth movement. This force application is further way that remodeling in the area occurs. In order to develop biological strategies for enhancing this movement of teeth in bone, the underlying mechanisms of bone resorption and apposition should be understood in detail. Analysis of gingival crevicular fluid (GCF may be a good means of examining the on going molecular and cellular process associated with gingival and bone turnover during orthodontic tooth movement. If it could be possible to biologically monitor and predict the outcome of orthodontic force, then the appliance management could be based on dividual tissue response and the effectiveness of the treatment could be improved and understanding their biology is critical to finding ways to modify bone biology to move teeth faster. The present article reviewed a short introduction to some mayors advanced mechanical force in molecular and cellular biology during orthodontic tooth movement.DOI: 10.14693/jdi.v15i3.30

Use of radioisotopes in the study of permeability of hard dental tissue

International Nuclear Information System (INIS)

Tarjan, I.

1978-01-01

A literature survey. According to in vivo experiments 32 P, 131 I and 45 Ca penetrate dental enamel and dentine. In vitro studies revealed that the healthy enamel and that damaged by caries and dentine are penetrable by 22 Na and 24 Na both in centripetal and in centrifugal directions. 32 P, 18 F and urea, labelled with 14 C penetrate healthy hard dental tissue. 45 CaCl 2 , 110 AgNO 3 , 111 AgNO 3 , 103 PdCl 2 , 64 Cu(NO 3 ) 2 , 63 ZnCl 2 , 65 ZnCl 2 and glucose, labelled with 14 C penetrate enamel defects, lamellas and caries areas. 239 Pu citrate complex links to the surface of enamel and cement, but does not penetrate them. (author)

Dosimetric response evaluation of tooth enamel for accelerator-based neutron radiation

International Nuclear Information System (INIS)

Khan, R.F.H.; Rink, W.J.; Boreham, D.R.

2003-01-01

To study the neutron response of human tooth enamel, a number of experiments with an accelerator-based neutron source have been designed. The neutron beam was produced with the low gamma yield, 7 Li(p,n) 7 Be type thick target, using the 3 MV McMaster K.N. Van de Graaff accelerator. The dosimetry was done using a pre-calibrated snoopy type neutron dosimeter. Neutron irradiation induces a dosimetric signal in the tooth enamel at the same defect site as gamma produced damage with the same g-values (g parallel =1.9973, width 0.4 mT g perpendicular =2.002, width 0.3 mT). The dosimetric signal grows linearly with neutron dose from 6-35 Gy tissue dose. Dosimetric response in two different grain sizes (300-500 μm, and grains <4 mm) has shown increased dosimetric amplitude in the larger grains. Dose build up effect on tooth inside the mouth due to cheek was simulated by placing a 4 mm thick paraffin wax layer between the beam and tooth, but had little effect. These results show that for mean neutron energy of 280 keV, the relative neutron response of the human tooth enamel ranges from 8% to 12% of the equivalent gamma ray response

A preliminary study of local administration of dexamethasone after tooth extraction: Better preservation of residual alveolar ridge?

Directory of Open Access Journals (Sweden)

Poštić Srđan D.

2014-01-01

Full Text Available Background/Aim. It is important that the height of the edentulous alveolar ridge after tooth extraction remains at a reasonable acceptable level for as long as possible. The aim of this study was to report preliminary results of the clinical effect of local oral submucous administration of dexamethasone after tooth extractions in order to prepare alveolar supporting tissues for acceptance of removable dentures. Methods. In a total of 15 patients (11 partially and 4 completely edentulous the quantity of 0.25 mL to 0.5 mL of dexamethasone was injected bucally and orally in the region of the tooth socket after complicated extractions. Results. Healing of extraction wounds was uneventful in all the patients, without pain or local inflammation. Conclusion. Dexamethasone can be locally applied to oral tissues to prevent post-extraction inflammation and extensive resorption of the residual alveolar ridge. The obtained results are promising for patients undergoing classic prosthodontic rehabilitation soon after tooth extraction, demonstrating that there are no adverse effects after local oral corticosteroids administration. [Projekat Ministarstva nauke Republike Srbije, br. 175021

Effects of gamma radiation on hard dental tissues of albino rats using scanning electron microscope - Part 1

Science.gov (United States)

El-Faramawy, Nabil; Ameen, Reham; El-Haddad, Khaled; Maghraby, Ahmed; El-Zainy, Medhat

2011-12-01

In the present study, 40 adult male albino rats were used to study the effect of gamma radiation on the hard dental tissues (enamel surface, dentinal tubules and the cementum surface). The rats were irradiated at 0.2, 0.5, 1.0, 2.0, 4.0 and 6.0 Gy gamma doses. The effects of irradiated hard dental tissues samples were investigated using a scanning electron microscope. For doses up to 0.5 Gy, there was no evidence of the existence of cracks on the enamel surface. With 1 Gy irradiation dose, cracks were clearly observed with localized erosive areas. At 2 Gy irradiation dose, the enamel showed morphological alterations as disturbed prismatic and interprismatic areas. An increase in dentinal tubules diameter and a contemporary inter-tubular dentine volume decrease were observed with higher irradiation dose. Concerning cementum, low doses,<0.5 Gy, showed surface irregularities and with increase in the irradiation dose to≥1 Gy, noticeable surface irregularities and erosive areas with decrease in Sharpey's fiber sites were observed. These observations could shed light on the hazardous effects of irradiation fields to the functioning of the human teeth.

Performance of fast-setting impression materials in the reproduction of subgingival tooth surfaces without soft tissue retraction.

Science.gov (United States)

Rudolph, Heike; Röhl, Andreas; Walter, Michael H; Luthardt, Ralph G; Quaas, Sebastian

2014-01-01

Fast-setting impression materials may be prone to inaccuracies due to accidental divergence from the recommended mixing protocol. This prospective randomized clinical trial aimed to assess three-dimensional (3D) deviations in the reproduction of subgingival tooth surfaces and to determine the effect of either following or purposely diverging from the recommended mixing procedure for a fast-setting addition-curing silicone (AS) and fast-setting polyether (PE). After three impressions each were taken from 96 participants, sawcut gypsum casts were fabricated with a standardized procedure and then optically digitized. Data were assessed with a computer-aided 3D analysis. For AS impressions, multivariate analysis of variance revealed a significant influence of the individual tooth and the degree to which the recommended mixing protocol was violated. For PE impressions, the ambient air temperature and individual tooth showed significant effects, while divergence from the recommended mixing protocol was not of significance. The fast-setting PE material was not affected by changes in the recommended mixing protocol. For the two fast-setting materials examined, no divergences from the recommended mixing protocol of less than 2 minutes led to failures in the reproduction of the subgingival tooth surfaces.

Evaluation of autogenous tooth transplantation for replacement of the missing or unrestorable mandibular molar tooth

Directory of Open Access Journals (Sweden)

Wahiduj Jaman

2017-06-01

Full Text Available This study was undertaken to evaluate the functional and occlusal stability of autogenous tooth transplantation. A total of 30 patients were included. Among them, 21 participants received transplanted first molar and the remaining 9 received transplanted second molar. In all the cases, donor tooth were third molar. In each participant, extraction of un-restorable first or second molar tooth was performed which was then replaced by atrumatic extracted third molar tooth. Each third molar tooth was placed in the recipient extracted socket, followed by the evaluation of the occlusion and then stabilized with arch bar and ligature wire. Clinical follow-up evaluation was performed at 15 days, 3 and 12 months in respect to occlusal stability, tooth mobility and periodontal status. It was found that 23 transplanted tooth were successful and the remaining 7 tooth need long-term observation for the final outcome, which was statistically significant. It can be concluded that the autogenous tooth transplantation can replace missing tooth to ensure the preservation of function, aesthetic and to prevent bone resorption of the missing area of the jaw, which can lead to exceptional esthetic and functional outcome.

针对组织工程多孔生物陶瓷的组织学技术优化探讨%Technique improvement of hard tissue slicing of bioceramic scaffold materials applied in bone tissue engineering

Institute of Scientific and Technical Information of China (English)

李林; 智伟; 桑力; 张成栋; 李金雨; 张聪; 娄延举; 夏天; 翁杰

2013-01-01

目的 改进硬组织切片技术以适应生物陶瓷材料在骨组织工程中的研究.方法 探索硬组织切片的厚度、漂片温度、裱片方法、烤片温度和时间的最佳组合,针对阳离子防脱载玻片的使用条件进行反复比较,通过改进操作流程中的关键技术和需避免的问题,摸索出阳离子载玻片在硬组织切片裱片中的最佳应用条件,克服了硬组织切片制作技术中标本易破碎、切片易脱落及染色时染料容易吸附的缺点.结果 通过技术探索与改进,生物陶瓷支架材料体内植入后的类骨修复体标本的硬组织切片能保持其杂化后的组织结构与比较完整的材料结构,可进行Masson三色染色、苏木精-伊红(HE)及甲苯胺蓝染色.染色后镜下观察显示支架内杂化生长的组织结构完整、细胞形态清晰、切片质量好、生物陶瓷支架脱片少.荧光显微镜可观察到类骨修复体钙沉积现象完整.结论 改善了传统硬组织切片技术处理生物陶瓷材料时易于破坏组织-材料结构的缺点.改进的硬组织切片技术适应生物陶瓷材料在骨组织工程领域研究.%Objective Purpose To improve the hard tissue slicing technology to adapt to the study of the bioceramic materials in bone tissue engineering.Methods Purpose To improve the hard tissue slicing technology to adapt to the study of the bioceramic materials in bone tissue engineering.Results The improved techniques in hard tissue slicing could keep the morphosis and structure of hybrid tissues,and easily stain with Masson,HE and toluidine blue.The stained hard tissue slicing had an intact tissue structure,clear cell form,good slicing quality,little shedding.Fluorescence microscope showed an intact calcium deposition of homologous bone restoration.Conclusion The method overcome the shortcomings of easy to destroy the tissue-material structure happened in the traditional hard tissue slicing of bioceramic materials

Disturbed tooth formation by 60Co-gamma-ray radiation

International Nuclear Information System (INIS)

Doh, Akio

1982-01-01

The molar of guinea pigs was irradiated with 60 Co-#betta# ray for daily observations of the manifestation of disturbed tooth formation by microradiography and the time registration by tetracycline-labelling. Irradiation first injured young blast cells of the dentin in the growth phase, dental pulp cells, and cells of the enamel. The portion composed of injured cells formed a depressed ''constriction'' from the dental pulp side toward the border between the enamel and dentin. The cells of the enamel injured by irradiation in the growth phase later formed a very thin irregular stroma. In contrast, cells in the differentiation or subsequent phase at the time of irradiation and cells probably having started to grow after irradiation proceeded with formation of a normal stroma and calcification. No uniform relation was obtained between the histological staining of the organic stroma of normal or abnormal dentin and calcification. Labelling with tetracycline revealed that the irradiation conditions in the present study provoked hardly any changes in the speed of tooth eruption. (Chiba, N.)

Influence of medication on the rate of orthodontic tooth movement (Part 1: hormons and corticosteroids

Directory of Open Access Journals (Sweden)

Mirhashemi Amirhossein

2015-05-01

Full Text Available The aim of this review article was to define the mechanism of action and effects of commonly used medications on the tissue remodeling and Orthodontic Tooth Movement (OTM. A review on the effects of medications and dietary supplements on the rate of experimental tooth movement was performed using Cochrane library, Embase and medline (1980-2013. 63 articles were included in this review. 34 of them were related to the effects of hormones and analgesics, were evaluated in this article but their interpretation was hindered by the variability in experimental design, magnitude of force applied during tooth movement and medication regimens. Non Steroidal Anti-Inflammatory Drugs (NSAIDs reduced the rate of tooth movement while non-NSAIDs such as acetaminophen had no effect on the rate of OTM. Corticosteroids, parathyroid hormone and thyroxin increased the rate of tooth movement. Sturgeons might slow OTM, but experimental studies are lacking. Medications might have an important influence on the rate of tooth movement and information on their consumption is necessary to adequately discuss treatment planning with patients.

Dose- and time-dependent effects of clodronate on orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Enita Nakaš

2017-02-01

Full Text Available Orthodontic tooth movement is the result of bone remodeling that occurs in periodontal ligament and alveolar bone tissue as a response to mechanical loading of the tooth. The aim of this study is to investigate the time- and dose-response effects of locally administered clodronate on tooth movement. Sixty Wistar rats were randomly assigned to 4 groups of 15 specimens: E1 - application of 10 mMol of clodronate in 3-day intervals; E2 - application of 2.5 mMol of clodronate in 3-day intervals; E3 - application of 10 mMol of clodronate in 7-day intervals; E4 - application of 2.5 mMol of clodronate in 7-day intervals. A 50 μL clodronate solution was injected into a subperiosteal area to the right maxillary incisor. The left maxillary incisor served as a control, with an injection of saline solution. In 3-day interval application regime, there was no effect of clodronate dosing on tooth movement. In 7-day interval application regime, decreased tooth movement was observed with 10 mMol compared with 2.5 mMol clodronate concentration. However, decreased tooth movement was also observed when 2.5 mMol of clodronate was applied in 7-versus 3-day intervals. Conversely, no difference was observed when 10 mMol concentration was applied in 3- versus 7-day intervals. When clodronate is applied subperiosteally in the root area, it decreases the tooth movement. Tooth movement is impeded by the higher clodronate dosing, as well as by shorter application interval even with lower dosing. The purpose of future trials should, therefore, be to determine a safe therapeutic dose/interval application of clodronate in humans and their potential side effects.

Mathematical description of tooth flank surface of globoidal worm gear with straight axial tooth profile

Science.gov (United States)

Połowniak, Piotr; Sobolak, Mariusz

2017-12-01

In this article, a mathematical description of tooth flank surface of the globoidal worm and worm wheel generated by the hourglass worm hob with straight tooth axial profile is presented. The kinematic system of globoidal worm gear is shown. The equation of globoid helix and tooth axial profile of worm is derived to determine worm tooth surface. Based on the equation of meshing the contact lines are obtained. The mathematical description of globoidal worm wheel tooth flank is performed on the basis of contact lines and generating the tooth side by the extreme cutting edge of worm hob. The presented mathematical model of tooth flank of TA worm and worm wheel can be used e.g. to analyse the contact pattern of the gear.

Characterization of glycosaminoglycans during tooth development and mineralization in the axolotl, Ambystoma mexicanum.

Science.gov (United States)

Wistuba, J; Völker, W; Ehmcke, J; Clemen, G

2003-10-01

Glycosaminoglycans (GAGs) involved in the formation of the teeth of Ambystoma mexicanum were located and characterized with the cuprolinic blue (CB) staining method and transmission electron microscopy (TEM). Glycosaminoglycan-cuprolinic blue precipitates (GAGCB) were found in different compartments of the mineralizing tissue. Various populations of elongated GAGCB could be discriminated both according to their size and their preferential distribution in the extracellular matrix (ECM). GAGCB populations that differ in their composition could be attributed not only to the compartments of the ECM but also to different zones and to different tooth types (early-larval and transformed). Larger precipitates were only observed within the dentine matrix of the shaft of the early-larval tooth. The composition of the populations differed significantly between the regions of the transformed tooth: pedicel, shaft and dividing zone. In later stages of tooth formation, small-sized GAGCBs were seen as intracellular deposits in the ameloblasts. It is concluded that the composition of GAGCB populations seems to play a role in the mineralization processes during tooth development in A. mexicanum and influence qualitative characteristics of the mineral in different tooth types and zones, and it is suggested that GAGs might be resorbed by the enamel epithelium during the late phase of enamel formation.

Wnt and BMP signaling crosstalk in regulating dental stem cells: Implications in dental tissue engineering

Directory of Open Access Journals (Sweden)

Fugui Zhang

2016-12-01

Full Text Available Tooth is a complex hard tissue organ and consists of multiple cell types that are regulated by important signaling pathways such as Wnt and BMP signaling. Serious injuries and/or loss of tooth or periodontal tissues may significantly impact aesthetic appearance, essential oral functions and the quality of life. Regenerative dentistry holds great promise in treating oral/dental disorders. The past decade has witnessed a rapid expansion of our understanding of the biological features of dental stem cells, along with the signaling mechanisms governing stem cell self-renewal and differentiation. In this review, we first summarize the biological characteristics of seven types of dental stem cells, including dental pulp stem cells, stem cells from apical papilla, stem cells from human exfoliated deciduous teeth, dental follicle precursor cells, periodontal ligament stem cells, alveolar bone-derived mesenchymal stem cells (MSCs, and MSCs from gingiva. We then focus on how these stem cells are regulated by bone morphogenetic protein (BMP and/or Wnt signaling by examining the interplays between these pathways. Lastly, we analyze the current status of dental tissue engineering strategies that utilize oral/dental stem cells by harnessing the interplays between BMP and Wnt pathways. We also highlight the challenges that must be addressed before the dental stem cells may reach any clinical applications. Thus, we can expect to witness significant progresses to be made in regenerative dentistry in the coming decade.

Smile restoration through use of enamel microabrasion associated with tooth bleaching.

Science.gov (United States)

Sundfeld, Renato Herman; Rahal, Vanessa; de Alexandre, Rodrigo Sversut; Briso, André Luiz Fraga; Sundfeld Neto, Daniel

2011-01-01

Enamel microabrasion can eliminate enamel irregularities and discoloration defects, improving the appearance of teeth. This article presents the latest treatment protocol of enamel microabrasion to remove stains on the enamel surface. It has been verified that teeth submitted to microabrasion acquire a yellowish color because of the thinness of the remaining enamel, revealing the color of dentinal tissue to a greater degree. In these clinical conditions, correction of the color pattern of these teeth can be obtained with a considerable margin of clinical success using products containing carbamide peroxide in custom trays. Thus, patients can benefit from combined enamel microabrasion/tooth bleaching therapy, which yields attractive cosmetic results. Esthetics plays an important role in contemporary dentistry, especially because the media emphasizes beauty and health. Currently, in many countries, a smile is considered beautiful if it imitates a natural appearance, with clear, well-aligned teeth and defined anatomical shapes. Enamel microabrasion is one technique that can be used to correct discolored enamel. This technique has been elucidated and strongly advocated by Croll and Cavanaugh since 1986, and by other investigators who suggested mechanical removal of enamel stains using acidic substances in conjunction with abrasive agents. Enamel microabrasion is indicated to remove intrinsic stains of any color and of hard texture, and is contraindicated for extrinsic stains, dentinal stains, for patients with deficient labial seals, and in cases where there is no possibility to place a rubber dam adequately during the microabrasion procedure. It should be emphasized that enamel microabrasion causes a microreduction on the enamel surface, and, in some cases, teeth submitted to microabrasion may appear a darker or yellowish color because the thin remaining enamel surface can reveal some of the dentinal tissue color. In these situations, according to Haywood and Heymann

Tooth - abnormal colors

Science.gov (United States)

... medlineplus.gov/ency/article/003065.htm Tooth - abnormal colors To use the sharing features on this page, please enable JavaScript. Abnormal tooth color is any color other than white to yellowish- ...

Pre-prosthetic minor tooth movement with elastic separating ring & provisional restoration modification: case report

Directory of Open Access Journals (Sweden)

Haneol Shin

2012-05-01

Full Text Available Proximal caries or coronal defect in posterior teeth may result in the loss of proximal space and drifting of neighboring teeth, which makes restoration difficult. Inability to restore proper contours and to align tooth axis properly are commonly encountered problems when planning tooth restoration. Moreover, tilted teeth aggravate periodontal tissue breakdown, such as pseudo-pocket, and angular osseous defect. The purpose of this case presentation is to describe a simple technique for inducing minor tooth movement with orthodontic separating ring and provisional restoration modification. This method was used to create crown placement space on mesially tilted molar. This method is easy, simple and efficient technique which could be used in interproximal space gaining in selected situation.

Hydroxyapatite coating on damaged tooth surfaces by immersion

International Nuclear Information System (INIS)

Lim, Byoung-Ki; Ryu, Su-Chak; Sun, Fangfang; Koh, Kwangnak; Han, Dong-Wook; Lee, Jaebeom

2009-01-01

Hydroxyapatite (HAp) was coated on scratched areas of a human tooth and HAp disks by the immersion method in a HAp colloidal solution (≤20 μm of average diameter dispersed in DI water). The surface morphologies of the scratched area after immersion for 1-3 months were investigated showing that the damaged surfaces were remarkably recovered. Then, the mechanical property and chemical stability of the HAp coating layers on both specimens were determined via the Vickers hardness test and concentration measurement of extracted Ca 2+ ions, respectively, after strong acidic treatment. The cellular behavior of mouse calvaria-derived pre-osteoblastic cells (MC3T3-E1) was also examined on the HAp layers regenerated on micro-scratched HAp disks for the purpose of their potential applications on maxillofacial bone conservation and reconstruction for prosthetic dentistry, and artificial disk preparation of a vertebral column. The notable loss of Ca 2+ ions under a highly acidic condition was not observed in the layers coated by HAp adsorption, indicating that the coating surface was well adhered with the original surfaces of the respective specimen. Moreover, the HAp adsorption did not adversely affect the adhesion, growth and proliferation of MC3T3-E1 cells on the coated HAp layers for up to 21 days. These results suggest that the HAp coating on the scratched areas of the tooth would be effectively applicable for the development of long-term prevention of micro-cleavage and tooth health supporters to reduce discoloration and further maxillofacial and orthopedic applications.

Tooth brushing, oil pulling and tissue regeneration: A review of holistic approaches to oral health.

Science.gov (United States)

Singh, Abhinav; Purohit, Bharathi

2011-04-01

Even though dentistry was not a specialized branch of Ayurveda, it is included in its Shalakya Tantra (system of surgery). Problems such as deformities of the oral cavity, plaques and infections were managed in ancient India. Traditional medicine can treat various infectious and chronic conditions. Research has shown that all kinds of chewing sticks described in ancient Ayurveda texts have medicinal and anti-cariogenic properties. Its oil pulling (Kaval, Gandush) practice is claimed to cure about 30 systemic diseases. Amla (Emblic myrobalan), is a general rebuilder of oral health. Bilberry fruit (Vaccinium myrtillus) and hawthorn berry (Crateagus oxycanthus) stabilize collagen, strengthening the gum tissue. Liquorice root (Glycyrrhiza glabral) promotes anti-cavity action, reduces plaque, and has an antibacterial effect. Use of safe, quality products and practices should be ensured based on available evidence if traditional medicine is to be acknowledged as part of primary health care. Scientific validations of the Ayurveda dental health practices could justify their incorporation into modern dental care. Publicity of these techniques using appropriate media would benefit the general population by giving more confidence in the ancient practices, thus preventing tooth decay and loss.

Tooth brushing, oil pulling and tissue regeneration: A review of holistic approaches to oral health

Directory of Open Access Journals (Sweden)

Abhinav Singh

2011-01-01

Full Text Available Even though dentistry was not a specialized branch of Ayurveda, it is included in its Shalakya Tantra (system of surgery. Problems such as deformities of the oral cavity, plaques and infections were managed in ancient India. Traditional medicine can treat various infectious and chronic conditions. Research has shown that all kinds of chewing sticks described in ancient Ayurveda texts have medicinal and anti-cariogenic properties. Its oil pulling (Kaval, Gandush practice is claimed to cure about 30 systemic diseases. Amla (Emblic myrobalan, is a general rebuilder of oral health. Bilberry fruit (Vaccinium myrtillus and hawthorn berry (Crateagus oxycanthus stabilize collagen, strengthening the gum tissue. Liquorice root (Glycyrrhiza glabral promotes anti-cavity action, reduces plaque, and has an antibacterial effect. Use of safe, quality products and practices should be ensured based on available evidence if traditional medicine is to be acknowledged as part of primary health care. Scientific validations of the Ayurveda dental health practices could justify their incorporation into modern dental care. Publicity of these techniques using appropriate media would benefit the general population by giving more confidence in the ancient practices, thus preventing tooth decay and loss.

Stem cells applications in bone and tooth repair and regeneration: New insights, tools, and hopes.

Science.gov (United States)

Abdel Meguid, Eiman; Ke, Yuehai; Ji, Junfeng; El-Hashash, Ahmed H K

2018-03-01

The exploration of stem and progenitor cells holds promise for advancing our understanding of the biology of tissue repair and regeneration mechanisms after injury. This will also help in the future use of stem cell therapy for the development of regenerative medicine approaches for the treatment of different tissue-species defects or disorders such as bone, cartilages, and tooth defects or disorders. Bone is a specialized connective tissue, with mineralized extracellular components that provide bones with both strength and rigidity, and thus enable bones to function in body mechanical supports and necessary locomotion process. New insights have been added to the use of different types of stem cells in bone and tooth defects over the last few years. In this concise review, we briefly describe bone structure as well as summarize recent research progress and accumulated information regarding the osteogenic differentiation of stem cells, as well as stem cell contributions to bone repair/regeneration, bone defects or disorders, and both restoration and regeneration of bones and cartilages. We also discuss advances in the osteogenic differentiation and bone regeneration of dental and periodontal stem cells as well as in stem cell contributions to dentine regeneration and tooth engineering. © 2017 Wiley Periodicals, Inc.

Patterns of Glycoconjugate Distribution during Molar Tooth Germ Development in Mice

Directory of Open Access Journals (Sweden)

AR. Varasteh

2007-09-01

Full Text Available Objective: The aim of the present study was to evaluate the structure and distribution of Glycoconjugates during molar tooth germ development in mice.Materials and Methods: Sixteen tooth germs were obtained from BALB/c mice embryos 15 to 18 days post-gestation and fixed in 10% formalin. After routine tissue processing, 5μm sections were cut and stained with BSA1-B4 and PNA using the lectin histochemical method. All slides were evaluated by light microscopy.Results: Both lectins showed positive reaction in the tooth germ but with spatiotemporal differences. During bell stage, the reaction was strong with BSA1-B4 but moderate with PNA. Strong PNA uptake was observed in the odontoblastic and ameloblastic nuclei alongwith the apical cytoplasm of the ameloblasts.Conclusion: Although the lectins that were used in the present study recognize the same terminal sugar residue, they reacted with different disaccharide sequences with various penaltomer sugars. Therefore it may be assumed that the pattern of affinity for different parts of the developing tooth germ such as ameloblasts and odontoblasts is different in various lectins.

Abrasive Wear of Four Direct Restorative Materials by Standard and Whitening Dentifrices

Science.gov (United States)

2013-06-01

Weader, E., Liscombe, C., & Holt, J.S. (2005). The measurement of enamel and dentine abrasion by tooth - whitening products using an in situ model...ABRASION OF TOOTH STRUCTURE Hard tissue abrasion is a familiar consequence of toothbrushing. Enamel , dentin, and cementum differ in their...LESIONS Cervical enamel wear is common; however, relatively few epidemiologic studies have distinguished between cervical enamel wear and tooth wear in

Dietary boron does not affect tooth strength, micro-hardness, and density, but affects tooth mineral composition and alveolar bone mineral density in rabbits fed a high-energy diet.

Science.gov (United States)

Hakki, Sema S; SiddikMalkoc; Dundar, Niyazi; Kayis, Seyit Ali; Hakki, Erdogan E; Hamurcu, Mehmet; Baspinar, Nuri; Basoglu, Abdullah; Nielsen, Forrest H; Götz, Werner

2015-01-01

The objective of this study was to determine whether dietary boron (B) affects the strength, density and mineral composition of teeth and mineral density of alveolar bone in rabbits with apparent obesity induced by a high-energy diet. Sixty female, 8-month-old, New Zealand rabbits were randomly assigned for 7 months into five groups as follows: (1) control 1, fed alfalfa hay only (5.91 MJ/kg and 57.5 mg B/kg); (2) control 2, high energy diet (11.76 MJ and 3.88 mg B/kg); (3) B10, high energy diet + 10 mg B gavage/kg body weight/96 h; (4) B30, high energy diet + 30 mg B gavage/kg body weight/96 h; (5) B50, high energy diet + 50 mg B gavage/kg body weight/96 h. Maxillary incisor teeth of the rabbits were evaluated for compression strength, mineral composition, and micro-hardness. Enamel, dentin, cementum and pulp tissue were examined histologically. Mineral densities of the incisor teeth and surrounding alveolar bone were determined by using micro-CT. When compared to controls, the different boron treatments did not significantly affect compression strength, and micro-hardness of the teeth, although the B content of teeth increased in a dose-dependent manner. Compared to control 1, B50 teeth had decreased phosphorus (P) concentrations. Histological examination revealed that teeth structure (shape and thickness of the enamel, dentin, cementum and pulp) was similar in the B-treated and control rabbits. Micro CT evaluation revealed greater alveolar bone mineral density in B10 and B30 groups than in controls. Alveolar bone density of the B50 group was not different than the controls. Although the B treatments did not affect teeth structure, strength, mineral density and micro-hardness, increasing B intake altered the mineral composition of teeth, and, in moderate amounts, had beneficial effects on surrounding alveolar bone.

Clinical application of single-tooth replacement with ankylos implant system

International Nuclear Information System (INIS)

Yang Xu; Liu Xue; Zhang Heng; Deng Yan; Guo Zhaozhong; Zhang Yufeng

2011-01-01

Objective: To evaluate the clinical effects of Ankylos implant system to restore the loss of single-tooth. Methods: 90 cases with loss of single-tooth were selected and treated with routinely two-stage surgery. When the patients presented with deficient alveolar ridge, guided bone regeneration (GBR), osteotome sinus floor elevation, lateral antrostomy surgery with simultaneous placement of implant were applied. They were restored with platinum ceramic crown. All the implants were followed up, and the records were kept about stability of the implant and abutment, the status of surrounding soft tissue, sealability of implant abutment junction and the marginal bone lossing through X-ray checking,and satisfaction of the patients to mastication and aspect of the restorations. The follow-up time was 1-2.5 years. Results: Among the cases,one case had peri-implant inflammation, and one case had porcelain dropped. No loosening occurred in the other implants and abuments. Implant abutment junction was sealed well. The marginal bone loss 1 year after final restoration was less than 1 mm. Soft tissue surrounding implants was healthy. The satisfaction rate was 98.9% (89/90). According to standard of implant success, 88 cases were successful, the 2.5-year cumulative success rate was 97.8%, 2 cases failed, and the failure rate was 2.2 %. Conclusion: A satisfactory treatment effects could be gotten by using Ankylos implant system to restore the loss of single-tooth. (authors)

Hard and Soft Tissue Management of a Localized Alveolar Ridge Atrophy with Autogenous Sources and Biomaterials: A Challenging Clinical Case

OpenAIRE

C. Maiorana; D. Andreoni; P. P. Poli

2016-01-01

Particularly in the premaxillary area, the stability of hard and soft tissues plays a pivotal role in the success of the rehabilitation from both a functional and aesthetic aspect. The present case report describes the clinical management of a localized alveolar ridge atrophy in the area of the upper right canine associated with a thin gingival biotype with a lack of keratinized tissue. An autogenous bone block harvested from the chin associated with heterologous bone particles was used to re...

Tooth Discoloration Induced by Different Calcium Silicate-based Cements: A Systematic Review of In Vitro Studies.

Science.gov (United States)

Możyńska, Joanna; Metlerski, Marcin; Lipski, Mariusz; Nowicka, Alicja

2017-10-01

On the basis of many clinical observations, some calcium silicate-based cements have a high potential for staining tooth tissue. This feature greatly limits the use of those cements, particularly for anterior teeth. This review aimed to provide a systematic evaluation of published in vitro studies to determine the effect of different calcium silicate-based cements on dental tissue discoloration. This literature review was developed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. The literature search was based on all publications without a year limit. The last search was performed on October 22, 2016. An electronic search was performed on MEDLINE (PubMed), Cochrane, and Scopus. The articles were selected to address the following research question: Which materials based on calcium silicate-based cements have hard tissue staining potential? The necessary information was extracted by 2 authors independently using a standardized form. The search resulted in 390 titles from all databases. Twenty-three studies met the inclusion criteria. Most of the studies exhibited a moderate risk of bias. The results indicated that some materials showed a strong potential for staining, including gray and white MTA Angelus (Londrina, PR, Brazil), gray and white ProRoot MTA (Dentsply, Tulsa, OK), and Ortho MTA (BioMTA, Seoul, Korea). Individual study results showed that Biodentine (Septodont, Saint Maur des Fosses, France), Retro MTA (BioMTA), Portland cement, EndoSequence Root Repair Material (Brasseler USA, Savannah, GA), Odontocem (Australian Dental Manufacturing, Brisbane, Australia), MM-MTA (Micro Mega, Besancon Cedex, France), and MTA Ledermix (Riemser Pharma GmbH, Greiswald-Insel Riems, Germany) were materials with the smallest staining potential. This review clearly showed that some calcium silicate-based cements have a high potential for staining hard tissue. On the other hand, some showed only a small change in color, which was

Cephalometric analysis of hard and soft tissues in a 12-year-old syndromic child: A case report and update on dentofacial features of Crouzon syndrome

Directory of Open Access Journals (Sweden)

K Nagaraju

2011-01-01

Full Text Available Crouzon syndrome or craniofacial dysostosis is a rare syndrome characterized by craniosynostosis, midfacial hypoplasia and exophthalmia. The abnormalities found in this syndrome change too much from case to case depending on the suture fusion order. We report a case of a 12 year old child and a mother showing variations in the dentofacial tissues clinically and radiographically. Subsequently, the application of digital software [Dolphin Imaging 11] enabled us to solve out the case as Crouzon syndrome by analyzing the skeletal and soft tissue alterations. An update of the effects of this syndrome on various systems and dentofacial features with emphasis on tooth abnormalities is documented.

Different methods of dentin processing for application in bone tissue engineering: A systematic review.

Science.gov (United States)

Tabatabaei, Fahimeh Sadat; Tatari, Saeed; Samadi, Ramin; Moharamzadeh, Keyvan

2016-10-01

Dentin has become an interesting potential biomaterial for tissue engineering of oral hard tissues. It can be used as a scaffold or as a source of growth factors in bone tissue engineering. Different forms of dentin have been studied for their potential use as bone substitutes. Here, we systematically review different methods of dentin preparation and the efficacy of processed dentin in bone tissue engineering. An electronic search was carried out in PubMed and Scopus databases for articles published from 2000 to 2016. Studies on dentin preparation for application in bone tissue engineering were selected. The initial search yielded a total of 1045 articles, of which 37 were finally selected. Review of studies showed that demineralization was the most commonly used dentin preparation process for use in tissue engineering. Dentin extract, dentin particles (tooth ash), freeze-dried dentin, and denatured dentin are others method of dentin preparation. Based on our literature review, we can conclude that preparation procedure and the size and shape of dentin particles play an important role in its osteoinductive and osteoconductive properties. Standardization of these methods is important to draw a conclusion in this regard. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2616-2627, 2016. © 2016 Wiley Periodicals, Inc.

Standard hardness conversion tables for metals relationship among brinell hardness, vickers hardness, rockwell hardness, superficial hardness, knoop hardness, and scleroscope hardness

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 Conversion Table 1 presents data in the Rockwell C hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.2 Conversion Table 2 presents data in the Rockwell B hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.3 Conversion Table 3 presents data on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, and Knoop hardness of nickel and high-nickel alloys (nickel content o...

Orthodontic Tooth Movement: A Historic Prospective.

Science.gov (United States)

Will, Leslie A

2016-01-01

The earliest report on orthodontic tooth movement in the English literature was published in 1911. Oppenheim carried out studies on baboons to determine what histologic changes occurred during tooth movement. Reitan and many others carried out research into the nature of tooth movement. The pressure-tension model of tooth movement developed from these studies, whereby the two sides of the tooth responded to forces as if in isolation. A second theory, proposed by Stuteville in 1938, was the hydraulic theory of tooth movement. In this theory, fluid from the vasculature, lymphatic system and intercellular spaces responds to the forces of tooth movement, damping the force and limiting movement. Bien and Baumrind expanded on this theory with their own studies in the 1960s. It is clear that both the pressure-tension and fluid flow concepts have merit, but considerable work needs to be done to ascertain the details so that tooth movement can be managed and controlled. © 2016 S. Karger AG, Basel.

Surgical Management of Compound Odontoma Associated with Unerupted Tooth

Directory of Open Access Journals (Sweden)

Andrea Pacifici

2015-01-01

Full Text Available Odontomas represent the most common type of odontogenic benign jaws tumors among patients younger than 20 years of age. These tumors are composed of enamel, dentine, cementum, and pulp tissue. According to the World Health Organization classification, two distinct types of odontomas are acknowledged: complex and compound odontoma. In complex odontomas, all dental tissues are formed, but appeared without an organized structure. In compound odontomas, all dental tissues are arranged in numerous tooth-like structures known as denticles. Compound odontomas are often associated with impacted adjacent permanent teeth and their surgical removal represents the best therapeutic option. A case of a 20-year-old male patient with a compound odontoma-associated of impacted maxillary canine is presented. A minimally invasive surgical technique is adopted to remove the least amount of bone tissue as far as possible.

A model for predicting wear rates in tooth enamel.

Science.gov (United States)

Borrero-Lopez, Oscar; Pajares, Antonia; Constantino, Paul J; Lawn, Brian R

2014-09-01

It is hypothesized that wear of enamel is sensitive to the presence of sharp particulates in oral fluids and masticated foods. To this end, a generic model for predicting wear rates in brittle materials is developed, with specific application to tooth enamel. Wear is assumed to result from an accumulation of elastic-plastic micro-asperity events. Integration over all such events leads to a wear rate relation analogous to Archard׳s law, but with allowance for variation in asperity angle and compliance. The coefficient K in this relation quantifies the wear severity, with an arbitrary distinction between 'mild' wear (low K) and 'severe' wear (high K). Data from the literature and in-house wear-test experiments on enamel specimens in lubricant media (water, oil) with and without sharp third-body particulates (silica, diamond) are used to validate the model. Measured wear rates can vary over several orders of magnitude, depending on contact asperity conditions, accounting for the occurrence of severe enamel removal in some human patients (bruxing). Expressions for the depth removal rate and number of cycles to wear down occlusal enamel in the low-crowned tooth forms of some mammals are derived, with tooth size and enamel thickness as key variables. The role of 'hard' versus 'soft' food diets in determining evolutionary paths in different hominin species is briefly considered. A feature of the model is that it does not require recourse to specific material removal mechanisms, although processes involving microplastic extrusion and microcrack coalescence are indicated. Published by Elsevier Ltd.

Development and microstructure of tooth histotypes in the blue shark, Prionace glauca (Carcharhiniformes: Carcharhinidae) and the great white shark, Carcharodon carcharias (Lamniformes: Lamnidae).

Science.gov (United States)

Moyer, Joshua K; Riccio, Mark L; Bemis, William E

2015-07-01

Elasmobranchs exhibit two distinct arrangements of mineralized tissues in the teeth that are known as orthodont and osteodont histotypes. Traditionally, it has been said that orthodont teeth maintain a pulp cavity throughout tooth development whereas osteodont teeth are filled with osteodentine and lack a pulp cavity when fully developed. We used light microscopy, scanning electron microscopy, and high-resolution micro-computed tomography to compare the structure and development of elasmobranch teeth representing the two histotypes. As an example of the orthodont histotype, we studied teeth of the blue shark, Prionace glauca (Carcharhiniformes: Carcharhinidae). For the osteodont histotype, we studied teeth of the great white shark, Carcharodon carcharias (Lamniformes: Lamnidae). We document similarities and differences in tooth development and the microstructure of tissues in these two species and review the history of definitions and interpretations of elasmobranch tooth histotypes. We discuss a possible correlation between tooth histotype and tooth replacement and review the history of histotype differentiation in sharks. We find that contrary to a long held misconception, there is no orthodentine in the osteodont teeth of C. carcharias. © 2015 Wiley Periodicals, Inc.

Abutment tooth loss in patients with overdentures.

Science.gov (United States)

Ettinger, Ronald L; Qian, Fang

2004-06-01

Since the 1960s, the use of natural teeth as overdenture abutments has become part of accepted clinical practice. Several longitudinal studies have been conducted, but tooth loss has not been reported to be a significant problem. The aim of this study was to identify the incidence and causes of tooth loss in a prospective cohort study of subjects wearing overdentures. The study, conducted between 1973 and 1994, evaluated 273 subjects (62.3 percent male) with a mean age of 59.6 years. Of the 273 subjects with 666 abutments, 74 lost 133 abutments. The most common cause of tooth loss was periodontal disease (29.3 percent) followed by periapical lesions (18.8 percent) and caries (16.5 percent). Through logistic regression, the authors found that subjects who lost teeth were more likely to have medical problems that could cause soft-tissue lesions of the oral mucosa, were less likely to use fluoride daily and were less likely to return for yearly recall visits. The authors found 22 vertical fractures in 17 subjects. Chi2 analysis revealed that overdenture teeth in the maxillary arch that were opposed by natural teeth were more likely to experience vertical fractures. In a study that followed up some patients for as long as 22 years, the rate of tooth loss was 20.0 percent. Many of these failures could have been prevented if patients had practiced better oral hygiene. The findings suggest that if a dentist recommends overdenture therapy, the patient needs to be examined regularly to reduce the risk of experiencing caries and periodontal disease. Also, if the abutments are in the maxilla and are opposed by natural teeth, the dentist should consider using thimble crowns to reduce the risk of vertical fractures.

Radicular Cyst With Actinomycotic Infection in an Upper Anterior Tooth

Directory of Open Access Journals (Sweden)

Shuei-Kuen Tseng

2009-10-01

Full Text Available Actinomycosis is an infection caused by filamentous, branching, Gram-positive anaerobic bacteria. It rarely infects the jawbone. This case report describes a patient with a left maxillary central incisor with an apical lesion and actinomycotic infection. A 23-year-old male patient underwent conventional root canal treatment of tooth 21, in a local dental clinic for about 1 year. However, percussion pain and a sinus tract that originated from tooth 21 were still present after treatment. Nonsurgical root canal treatment of tooth 21 was performed again but failed to relieve the symptoms. Therefore, apicoectomy and retrograde filling of the apical root canal with mineral trioxide aggregate were carried out. Periradicular bony defect was grafted by biocompatible material, and postoperative antibiotics (250 mg amoxicillin were given three times daily for 5 days. Pathological examination of the removed periapical tissue showed a radicular cyst with actinomycosis. At the 9-month postoperative recall, the sinus tract had disappeared and radiographic examination showed healing of the apical lesion. Periradicular actinomycosis is one important reason for failure of nonsurgical endodontic treatment. Clinically, if the tooth shows a recurrent sinus tract and poor response to conventional root canal treatment combined with antibiotic control, apical actinomycotic infection should be highly suspected, and an alternative endodontic surgical approach is needed for successful treatment.

Role of the epithelial cell rests of Malassez in the development, maintenance and regeneration of periodontal ligament tissues.

Science.gov (United States)

Xiong, Jimin; Gronthos, Stan; Bartold, P Mark

2013-10-01

Periodontitis is a highly prevalent inflammatory disease that results in damage to the tooth-supporting tissues, potentially leading to tooth loss. Periodontal tissue regeneration is a complex process that involves the collaboration of two hard tissues (cementum and alveolar bone) and two soft tissues (gingiva and periodontal ligament). To date, no periodontal-regenerative procedures provide predictable clinical outcomes. To understand the rational basis of regenerative procedures, a better understanding of the events associated with the formation of periodontal components will help to establish reliable strategies for clinical practice. An important aspect of this is the role of the Hertwig's epithelial root sheath in periodontal development and that of its descendants, the epithelial cell rests of Malassez, in the maintenance of the periodontium. An important structure during tooth root development, the Hertwig's epithelial root sheath is not only a barrier between the dental follicle and dental papilla cells but is also involved in determining the shape, size and number of roots and in the development of dentin and cementum, and may act as a source of mesenchymal progenitor cells for cementoblasts. In adulthood, the epithelial cell rests of Malassez are the only odontogenic epithelial population in the periodontal ligament. Although there is no general agreement on the functions of the epithelial cell rests of Malassez, accumulating evidence suggests that the putative roles of the epithelial cell rests of Malassez in adult periodontal ligament include maintaining periodontal ligament homeostasis to prevent ankylosis and maintain periodontal ligament space, to prevent root resorption, to serve as a target during periodontal ligament innervation and to contribute to cementum repair. Recently, ovine epithelial cell rests of Malassez cells have been shown to harbor clonogenic epithelial stem-cell populations that demonstrate similar properties to mesenchymal stromal

The 808 nm Laser-Assisted Surgery as an Adjunct to Orthodontic Treatment of Delayed Tooth Eruption.

Science.gov (United States)

Seifi, Massoud; Vahid-Dastjerdi, Elahe; Ameli, Nazila; Badiee, Mohammad-Reza; Younessian, Farnaz; Amdjadi, Parisa

2013-01-01

Failure of teeth to erupt from gingival tissues at usual developmental time is called delayed tooth eruption (DTE). Delayed tooth eruption lead to prolonged fixed orthodontic treatment and its eventual complications. The purpose of the present study was to evaluate the effect of laser-assisted (808 nm) surgical uncovering, on the tooth emergence and orthodontic treatment of DTE. A total of 16 orthodontic patients were included in this study and were equally assigned to an experimental and a control group. Subjects for experiment consisted of eight patients (6 girls and 2 boys) with a mean age of 14±0.9 years. All patients exhibited delayed second premolar eruption. The laser wavelength was 810 nm and it was set in a continuous wave mode at a power output of 1.6 watt with a 0.3-mm diameter fiber tip. When the target tissue was sufficiently anesthetized, the tip was directed at an angle of 10 to 20 degrees to the tissue (light contact mode); and was applied continuously for approximately 12 Seconds until an acceptable tooth exposure area was visible. The facial axis of the clinical crown (FACC) line represents the most prominent portion of the facial central lobe for premolars. All orthodontic brackets are aligned along this reference and are located on FA (Facial Axis) point. The standard for adequate tooth eruption was the accessibility of facial axis of the clinical crown (FACC) for bonding the brackets. Data gathered from the patients were statistically surveyed and compared by means of Tukey's Test and Analysis of Variance (ANOVA). All patients showed good gingival status, no significant bleeding during or immediately after the surgery, and acceptable level of healing after laser surgery. The biologic width of the teeth was preserved and no violation of this important periodontal parameter was observed. The average time for accessing the FA point in experimental group was 11±1.1 weeks and the mentioned period was increased to 25±1.8 weeks in control group

Use of radioisotopes in the study of permeability of hard dental tissue

Energy Technology Data Exchange (ETDEWEB)

Tarjan, I [Semmelweis Orvostudomanyi Egyetem, Budapest (Hungary)

1978-04-01

A literature survey. According to in vivo experiments /sup 32/P, /sup 131/I and /sup 45/Ca penetrate dental enamel and dentine. In vitro studies revealed that the healthy enamel and that damaged by caries and dentine are penetrable by /sup 22/Na and /sup 24/Na both in centripetal and in centrifugal directions. /sup 32/P, /sup 18/F and urea, labelled with /sup 14/C penetrate healthy hard dental tissue. /sup 45/CaCl/sub 2/, /sup 110/AgNO/sub 3/, /sup 111/AgNO/sub 3/, /sup 103/PdCl/sub 2/, /sup 64/Cu(NO/sub 3/)/sub 2/, /sup 63/ZnCl/sub 2/, /sup 65/ZnCl/sub 2/ and glucose, labelled with /sup 14/C penetrate enamel defects, lamellas and caries areas. /sup 239/Pu citrate complex links to the surface of enamel and cement, but does not penetrate them.

Use of a Piezosurgery Technique to Remove a Deeply Impacted Supernumerary Tooth in the Anterior Maxilla

Science.gov (United States)

Sukegawa, Shintaro; Kanno, Takahiro; Kawakami, Kiyokazu; Shibata, Akane; Takahashi, Yuka; Furuki, Yoshihiko

2015-01-01

Deeply impacted supernumerary teeth in the anterior maxillary cannot be generally removed by the conventional labial or palatal surgical approach because of the risk of damaging the surrounding soft tissues and the possibility of injuring the roots of adjacent permanent teeth. In piezosurgery, bony tissues are selectively cut, thereby avoiding the soft tissue damage caused by rotary cutting instruments. We report the case of a 15-year-old Japanese boy from whom a deeply impacted supernumerary tooth in the anterior maxillary was safely removed through the floor of the nasal cavity. The surgical extraction was performed without damaging the nasal mucosa or adjacent structures such as the roots of the adjacent permanent teeth. Considering that piezosurgery limits the extent of surgical invasion, this technique can be practiced as a minimally invasive and safe surgical procedure for treating suitably selected cases with a deeply impacted supernumerary tooth. PMID:26779355

Use of a Piezosurgery Technique to Remove a Deeply Impacted Supernumerary Tooth in the Anterior Maxilla

Directory of Open Access Journals (Sweden)

Shintaro Sukegawa

2015-01-01

Full Text Available Deeply impacted supernumerary teeth in the anterior maxillary cannot be generally removed by the conventional labial or palatal surgical approach because of the risk of damaging the surrounding soft tissues and the possibility of injuring the roots of adjacent permanent teeth. In piezosurgery, bony tissues are selectively cut, thereby avoiding the soft tissue damage caused by rotary cutting instruments. We report the case of a 15-year-old Japanese boy from whom a deeply impacted supernumerary tooth in the anterior maxillary was safely removed through the floor of the nasal cavity. The surgical extraction was performed without damaging the nasal mucosa or adjacent structures such as the roots of the adjacent permanent teeth. Considering that piezosurgery limits the extent of surgical invasion, this technique can be practiced as a minimally invasive and safe surgical procedure for treating suitably selected cases with a deeply impacted supernumerary tooth.

Is a three-dimensional-printed tooth filling possible?

OpenAIRE

Muhammet Kerim Ayar

2016-01-01

Introduction: Three-dimensional (3-D) printing is seen as an innovative production process in many fields of dentistry and medicine. But implantation of this novel production process into the treatment of decayed teeth in dentistry remains lacking. Destruction of dental tissues as a result of dental caries is generally treated with dental resin composite fillings. However, a 3-D-printed tooth filling approach, which could be an alternative to traditional approaches, has a potential to reduce ...

Clinical considerations for regenerative endodontic procedures.

Science.gov (United States)

Geisler, Todd M

2012-07-01

The management of a tooth with incomplete root maturation and a necrotic pulp is an endodontic and a restorative challenge. Apexification procedures alone leave the tooth in a weakened state and at risk for reinfection. Regenerative endodontic procedures potentially offer advantages, including the possibility of hard tissue deposition and continued root development. Case studies have reported regeneration of human pulplike tissues in vivo, but there is no protocol that reliably regenerates pulplike tissue. This article summarizes historical, current, and future regenerative treatment approaches. Copyright © 2012 Elsevier Inc. All rights reserved.

[Assessment of tooth bleaching efficacy with spectrophotometer].

Science.gov (United States)

Zhu, Wenhao; Liu, Chang; Pan, Jie

2014-06-01

To analyze the changes in CIE L*, a*, and b* at cervical, body, and incisal sites after tooth bleaching by using a spectrophotometer. Sixty-seven intact and healthy maxillary central incisors were in-vestigated. These incisors were darker than A3 according to the Vita Classical shade guide. The CIE tooth shade parameters L*, a*, and b* were simultaneously recorded at three tooth areas (cervical, body, and incisal) with a spectrophotometer before and after tooth bleaching (35%H2O2 coordinating with Beyond whitening accelerator irradiating). The shade dif-ferential (DeltaE) was calculated. ANOVA, paired t-test, and Pearson correlation analysis were used for data analysis. The efficacy rates of tooth bleaching were satisfactory, with 86.6%, 86.6%, and 85.1% in the cervical, body, and incisal sites, respectively. The average values of DeltaE were 5.09, 4.44, and 4.40 in the cervical, body, and incisal sites. Tooth bleaching significantly increased L* and significantly decreased a* and b* in all tooth areas (P spectrophotometer could objectively evaluate the whitening effect of tooth bleaching at the different tooth sites. The tooth bleaching system (35%H202 coordinating with Beyond whitening accelerator irradiating) exerts powerful bleaching actions in most of the tooth areas investigated. The order of tooth bleaching effectiveness is cervicalbody>incisal. Yellow coloration is decreased mainly at the cervical site, and brightness was increased mostly at theincisal site. The effectiveness of tooth bleaching increases as the baseline b* value increases.

Nanomaterials for Craniofacial and Dental Tissue Engineering.

Science.gov (United States)

Li, G; Zhou, T; Lin, S; Shi, S; Lin, Y

2017-07-01

Tissue engineering shows great potential as a future treatment for the craniofacial and dental defects caused by trauma, tumor, and other diseases. Due to the biomimetic features and excellent physiochemical properties, nanomaterials are of vital importance in promoting cell growth and stimulating tissue regeneration in tissue engineering. For craniofacial and dental tissue engineering, the frequently used nanomaterials include nanoparticles, nanofibers, nanotubes, and nanosheets. Nanofibers are attractive for cell invasion and proliferation because of their resemblance to extracellular matrix and the presence of large pores, and they have been used as scaffolds in bone, cartilage, and tooth regeneration. Nanotubes and nanoparticles improve the mechanical and chemical properties of scaffold, increase cell attachment and migration, and facilitate tissue regeneration. In addition, nanofibers and nanoparticles are also used as a delivery system to carry the bioactive agent in bone and tooth regeneration, have better control of the release speed of agent upon degradation of the matrix, and promote tissue regeneration. Although applications of nanomaterials in tissue engineering remain in their infancy with numerous challenges to face, the current results indicate that nanomaterials have massive potential in craniofacial and dental tissue engineering.

Fiber composites as a method of treatment splinting tooth mobility in chronic periodontitis

Directory of Open Access Journals (Sweden)

Dewi Lidya Ichwana

2016-12-01

Full Text Available Patients with periodontal disease can lead to severe tooth mobility so often complains of pain when eating, decreased chewing ability and functional occlusion. Tooth mobility is a movement in a horizontal or vertical direction and one of the most unpleased effects from periodontal disease. Basically, tooth mobility is not a disease that requires treatment, but it is a symptom of periodontal tissue morphology changes, so it became a challenge for dentists in making decisions to maintain proper care of the teeth. Recent studies improved the use of periodontal splint with fiber reinforced composite (FRC or fiber composite may lead to a long-term prognosis of teeth mobility due to periodontal disase. The case report describes treatment of chronic periodontitis patients with splinting fiber composites as a method for stabilization of the lower anterior teeth providing aesthetics, comfort, improved functionality occlusion, mastication and a good prognosis.

Hard and Soft Tissue Management of a Localized Alveolar Ridge Atrophy with Autogenous Sources and Biomaterials: A Challenging Clinical Case

Directory of Open Access Journals (Sweden)

C. Maiorana

2016-01-01

Full Text Available Particularly in the premaxillary area, the stability of hard and soft tissues plays a pivotal role in the success of the rehabilitation from both a functional and aesthetic aspect. The present case report describes the clinical management of a localized alveolar ridge atrophy in the area of the upper right canine associated with a thin gingival biotype with a lack of keratinized tissue. An autogenous bone block harvested from the chin associated with heterologous bone particles was used to replace the missing bone, allowing for a prosthetic driven implant placement. Soft tissues deficiency was corrected by means of a combined epithelialized and subepithelial connective tissue graft. The 3-year clinical and radiological follow-up demonstrated symmetric gingival levels of the upper canines, with physiological peri-implant probing depths and bone loss. Thus, the use of autogenous tissues combined with biomaterials might be considered a reliable technique in case of highly aesthetic demanding cases.

Modelling of micromachining of human tooth enamel by erbium laser radiation

Energy Technology Data Exchange (ETDEWEB)

Belikov, A V; Skrypnik, A V; Shatilova, K V [St. Petersburg National Research University of Information Technologies, Mechanics and Optics, St. Petersburg (Russian Federation)

2014-08-31

We consider a 3D cellular model of human tooth enamel and a photomechanical cellular model of enamel ablation by erbium laser radiation, taking into account the structural peculiarities of enamel, energy distribution in the laser beam cross section and attenuation of laser energy in biological tissue. The surface area of the texture in enamel is calculated after its micromachining by erbium laser radiation. The influence of the surface area on the bond strength of enamel with dental filling materials is discussed. A good correlation between the computer simulation of the total work of adhesion and experimentally measured bond strength between the dental filling material and the tooth enamel after its micromachining by means of YAG : Er laser radiation is attained. (laser biophotonics)

Modelling of micromachining of human tooth enamel by erbium laser radiation

International Nuclear Information System (INIS)

Belikov, A V; Skrypnik, A V; Shatilova, K V

2014-01-01

We consider a 3D cellular model of human tooth enamel and a photomechanical cellular model of enamel ablation by erbium laser radiation, taking into account the structural peculiarities of enamel, energy distribution in the laser beam cross section and attenuation of laser energy in biological tissue. The surface area of the texture in enamel is calculated after its micromachining by erbium laser radiation. The influence of the surface area on the bond strength of enamel with dental filling materials is discussed. A good correlation between the computer simulation of the total work of adhesion and experimentally measured bond strength between the dental filling material and the tooth enamel after its micromachining by means of YAG : Er laser radiation is attained. (laser biophotonics)

Evaluation of erbium:YAG and holmium:YAG laser radiation and dental hard tissue

Science.gov (United States)

Attrill, David Cameron

Lasers have become increasingly established in medicine as effective alternatives or adjuncts to conventional techniques. In dentistry, several clinical laser systems have been developed and marketed, but their applications have been limited to soft tissue surgery. To date, no laser has been capable of effectively cutting or modifying the highly mineralised dental tissues of enamel and dentine. The aim of this study was to evaluate two new laser systems for use in dentistry through a series of in vitro experiments. Both generic erbium and holmium lasers have theoretically superior operating characteristics over currently established lasers for applications with dental hard tissues. The two lasers investigated in this study were pulsed Er:YAG (lambda=2.94) a.m. and Cr-Tm-Ho:YAG (lambda=2.1mu.m). Both operated with a macropulse duration of approximately 200lambdas, at pulse repetition rates of 2-8Hz and mean pulse energies up to 230mJ. Radiation was focused using CaF[2] lenses (f=50-120mm). The lasers could be operated with or without the addition of a surface water film at the interaction site. Tissue removal efficiency was expressed as a latent heat of ablation (LHA, kJ/cm[3]) using a modification of the technique described by Charlton et al. (1990). The mean LHA's for the Er:YAG laser were 6.24kJ/cm[3] and 22.99kJ/cm[3] with dentine and enamel respectively without water, and 10.07kJ/cm[3] and 18.73kJ/cm[3] for dentine and enamel with water. The Cr-Tm-Ho:YAG laser was unable to effectively remove enamel at the fluences and pulse energies available; the mean LHA's for the Cr-Tm- Ho:YAG laser with dentine were 82.79kJ/cm3 and 57.57kJ/cm3 with and without water respectively. The Cr-Tm-Ho;YAG was approximately 8-9 times less efficient for tissue removal than the Er:YAG system. Er:YAG tissue removal with water was characterised by clean "surgical" cuts, comparable in histological appearance to those obtained using conventional instrumentation. Some thermal disruption

PIXE studies on teeth

International Nuclear Information System (INIS)

Chaudhri, M.A.; Ainsworth, T.

1980-01-01

The elemental composition of healthy and diseased teeth from 25 children has been determined using thick-target proton induced x-ray emission, (PIXE), analysis. Various dental hard tissues: enamel, dentine and cementum, and their junctions, as well as different parts of the same tissue, have been examined individually. A number of elements: Na, Mg, Al, P, S, Cl, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, Sr and Pb, has been determined in these dental tissues. The concentrations of some of the elements tend to vary considerably from tooth to tooth and tissue to tissue. Attempts have been made to correlate the concentrations of various elements in teeth with their health

Effects of caffeic acid phenethyl ester on palatal mucosal defects and tooth extraction sockets

Science.gov (United States)

Günay, Ahmet; Arpağ, Osman Fatih; Atilgan, Serhat; Yaman, Ferhan; Atalay, Yusuf; Acikan, İzzet

2014-01-01

Aim The purpose of this study was to evaluate the effects of caffeic acid phenethyl ester (CAPE) on palatal mucosal defects and tooth extraction sockets in an experimental model. Materials and methods Forty-two male Sprague-Dawley rats with a mean age of 7 weeks and weighing 280–490 g were used in this study. The rats were randomly divided into two groups: group A (the control group, n=21) and group B (the experimental group, n=21). Under anesthesia with ketamine (8 mg/100 g, intraperitoneally), palatal mucosal defects were created and tooth extraction was performed in the rats in groups A and B. Group A received no treatment, whereas group B received CAPE. CAPE was injected daily (10 μmol/kg, intraperitoneally). The rats were killed on days 7, 14, and 30 after the procedures. Palatal mucosa healing and changes in bone tissue and fibrous tissue were evaluated histopathologically. Result Pairwise comparisons showed no statistically significant difference between days 7 and 14 in either group (P>0.05). At day 30, bone healing was significantly better in group B (CAPE) than in group A (control) (P0.05). Conclusion In conclusion, the findings of this study suggest that CAPE can significantly improve tooth socket healing. PMID:25364232

Electrospun PVA/HAp nanocomposite nanofibers: biomimetics of mineralized hard tissues at a lower level of complexity.

Science.gov (United States)

Kim, Gyeong-Man; Asran, Ashraf Sh; Michler, Georg H; Simon, Paul; Kim, Jeong-Sook

2008-12-01

Based on the biomimetic approaches the present work describes a straightforward technique to mimic not only the architecture (the morphology) but also the chemistry (the composition) of the lowest level of the hierarchical organization of bone. This technique uses an electrospinning (ES) process with polyvinyl alcohol (PVA) and hydroxyapatite (HAp) nanoparticles. To determine morphology, crystalline structures and thermal properties of the resulting electrospun fibers with the pure PVA and PVA/HAp nanocomposite (NC) before electrospinning various techniques were employed, including transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In addition, FT-IR spectroscopy was carried out to analyze the complex structural changes upon undergoing electrospinning as well as interactions between HAp and PVA. The morphological and crystallographic investigations revealed that the rod-like HAp nanoparticles exhibit a nanoporous morphology and are embedded within the electrospun fibers. A large number of HAp nanorods are preferentially oriented parallel to the longitudinal direction of the electrospun PVA fibers, which closely resemble the naturally mineralized hard tissues of bones. Due to abundant OH groups present in PVA and HAp nanorods, they strongly interact via hydrogen bonding within the electrospun PVA/HAp NC fibers, which results in improved thermal properties. The unique physiochemical features of the electrospun PVA/HAp NC nanofibers prepared by the ES process will open up a wide variety of future applications related to hard tissue replacement and regeneration (bone and dentin), not limited to coating implants.

Electrospun PVA/HAp nanocomposite nanofibers: biomimetics of mineralized hard tissues at a lower level of complexity

Energy Technology Data Exchange (ETDEWEB)

Kim, Gyeong-Man; Asran, Ashraf Sh; Michler, Georg H [Institute of Physics, Martin-Luther-University Halle-Wittenberg, D-06099 Halle/S (Germany); Simon, Paul [Max-Planck Institute for Chemical Physics of Solids, Noethnitzer Strasse 40, D-01187 Dresden (Germany); Kim, Jeong-Sook [Department of Dental Technology, Daegu Health College, 702-722 Daegu (Korea, Republic of)], E-mail: gyeong.kim@physik.uni-halle.de

2008-12-01

Based on the biomimetic approaches the present work describes a straightforward technique to mimic not only the architecture (the morphology) but also the chemistry (the composition) of the lowest level of the hierarchical organization of bone. This technique uses an electrospinning (ES) process with polyvinyl alcohol (PVA) and hydroxyapatite (HAp) nanoparticles. To determine morphology, crystalline structures and thermal properties of the resulting electrospun fibers with the pure PVA and PVA/HAp nanocomposite (NC) before electrospinning various techniques were employed, including transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In addition, FT-IR spectroscopy was carried out to analyze the complex structural changes upon undergoing electrospinning as well as interactions between HAp and PVA. The morphological and crystallographic investigations revealed that the rod-like HAp nanoparticles exhibit a nanoporous morphology and are embedded within the electrospun fibers. A large number of HAp nanorods are preferentially oriented parallel to the longitudinal direction of the electrospun PVA fibers, which closely resemble the naturally mineralized hard tissues of bones. Due to abundant OH groups present in PVA and HAp nanorods, they strongly interact via hydrogen bonding within the electrospun PVA/HAp NC fibers, which results in improved thermal properties. The unique physiochemical features of the electrospun PVA/HAp NC nanofibers prepared by the ES process will open up a wide variety of future applications related to hard tissue replacement and regeneration (bone and dentin), not limited to coating implants.

Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy.

Science.gov (United States)

Bahreyni Toossi, Mohammad Taghi; Ghorbani, Mahdi; Akbari, Fatemeh; Mehrpouyan, Mohammad; Sobhkhiz Sabet, Leila

2016-03-01

The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm(2) applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam's energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

Precise femtosecond laser ablation of dental hard tissue: preliminary investigation on adequate laser parameters

International Nuclear Information System (INIS)

Hikov, Todor; Pecheva, Emilia; Petrov, Todor; Montgomery, Paul; Antoni, Frederic; Leong-Hoi, Audrey

2017-01-01

This work aims at evaluating the possibility of introducing state-of-the-art commercial femtosecond laser system in restorative dentistry by maintaining well-known benefits of lasers for caries removal, but also in overcoming disadvantages such as thermal damage of irradiated substrate. Femtosecond ablation of dental hard tissue is investigated by changing the irradiation parameters (pulsed laser energy, scanning speed and pulse repetition rate), assessed for enamel and dentin. The femtosecond laser system used in this work may be suitable for cavity preparation in dentin and enamel, due to the expected effective ablation and low temperature increase when using ultra short laser pulses. If adequate laser parameters are selected, this system seems to be promising for promoting a laser-assisted, minimally invasive approach in restorative dentistry. (paper)

Hard tissue formation in a porous HA/TCP ceramic scaffold loaded with stromal cells derived from dental pulp and bone marrow.

NARCIS (Netherlands)

Zhang, W.; Walboomers, X.F.; Osch, G.J.V.M. van; Dolder, J. van den; Jansen, J.A.

2008-01-01

The aim of this study was to compare the ability of hard tissue regeneration of four types of stem cells or precursors under both in vitro and in vivo situations. Primary cultures of rat bone marrow, rat dental pulp, human bone marrow, and human dental pulp cells were seeded onto a porous ceramic

Dental Caries (Tooth Decay)

Science.gov (United States)

... Materials Contact Us Home Research Data & Statistics Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...

Dental Caries (Tooth Decay)

Science.gov (United States)

... Contact Us Home Research Data & Statistics Share Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...

Prosthetic clone and natural human tooth comparison by speckle interferometry

Science.gov (United States)

Slangen, Pierre; Corn, Stephane; Fages, Michel; Raynal, Jacques; Cuisinier, Frederic J. G.

2010-09-01

New trends in dental prosthodontic interventions tend to preserve the maximum of "body" structure. With the evolution of CAD-CAM techniques, it is now possible to measure "in mouth" the remaining dental tissues. The prosthetic crown is then designed using this shape on which it will be glued on, and also by taking into account the contact surface of the opposite jaw tooth. Several theories discuss on the glue thickness and formulation, but also on the way to evolve to a more biocompatible crown and also new biomechanical concepts. In order to validate these new concepts and materials, and to study the mechanical properties and mechanical integrity of the prosthesis, high resolution optical measurements of the deformations of the glue and the crown are needed. Samples are two intact premolars extracted for orthodontics reasons. The reference sample has no modifications on the tooth while the second sample tooth is shaped to receive a feldspathic ceramic monoblock crown which will be glued. This crown was manufactured with a chairside CAD-CAM system from an intra-oral optical print. The software allows to realize a nearly perfect clone of the reference sample. The necessary space for the glue is also entered with ideal values. This duplication process yields to obtain two samples with identical anatomy for further processing. The glue joint thickness can also be modified if required. The purpose is to compare the behaviour of a natural tooth and its prosthetic clone manufactured with "biomechanical" concepts. Vertical cut samples have been used to deal with planar object observation, and also to look "inside" the tooth. We have developed a complete apparatus enabling the study of the compressive mechanical behaviour of the concerned tooth by speckle interferometry. Because in plane displacements are of great interest for orthodontic measurements1, an optical fiber in-plane sensitive interferometer has been designed. The fibers are wrapped around piezoelectric

Depth profile analysis of non-specific fluorescence and color of tooth tissues after peroxide bleaching.

Science.gov (United States)

Klukowska, Malgorzata; Götz, Hermann; White, Donald J; Zoladz, James; Schwarz, Björn-Olaf; Duschner, Heinz

2013-02-01

To examine laboratory changes of endogenous non-specific fluorescence and color throughout subsurface of tooth structures prior to and following peroxide bleaching. Extracted human teeth were cross sectioned and mounted on glass slides. Cross sections were examined for internal color (digital camera) and nonspecific fluorescence (microRaman spectroscopy) throughout the tooth structure at specified locations. Surfaces of sections were then saturation bleached for 70 hours with a gel containing 6% hydrogen peroxide. Cross sections were reexamined for color and non-specific fluorescence changes. Unbleached enamel, dentin-enamel junction and dentin exhibit different CIELab color and non-specific fluorescence properties. Bleaching of teeth produced significant changes in color of internal cross sections and substantial reductions of non-specific fluorescence levels within enamel dentin and DEJ. Enamel and dentin non-specific fluorescence were reduced to common values with bleaching with enamel and the DEJ showing larger reductions than dentin.

Changes after surgically-assisted maxillary expansion (SARME) to the dentoalveolar, palatal and nasal structures by using tooth-borne distraction devices.

Science.gov (United States)

Seeberger, Robin; Kater, Wolfgang; Schulte-Geers, Michael; Davids, Rolf; Freier, Kolja; Thiele, Oliver

2011-07-01

Different devices are available to aid surgically-assisted maxillary expansion. In this study we have evaluated the changes to the anchoring teeth, the hard palate, and the lower nasal passage made by tooth-borne distraction devices. Thirty-one patients (mean (SD) age 28 (2) years) with deficiencies in the transverse width of the maxilla were examined by computed tomography and cone beam scans before and after operation. The data were analysed with the help of Wilcoxon's signed rank test and Spearman's r correlation. The mean (SD) distraction width was 6.5 (2.3) mm. All anchorage teeth were tilted (pdistraction width, with changes in the intercoronal and interapical distances of the anchoring premolars (pdistraction width and the overall gain in width of the lower nasal passage (pmaxillary expansion with tooth-borne devices has significant effects on the anchoring teeth, the nasal floor, and the hard palate. Both tilting of the teeth and an evenly distributed movement of the segments were seen. Copyright © 2010 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Effects of pulpectomy on the amount of root resorption during orthodontic tooth movement.

Science.gov (United States)

Kaku, Masato; Sumi, Hiromi; Shikata, Hanaka; Kojima, Shunichi; Motokawa, Masahide; Fujita, Tadashi; Tanimoto, Kotaro; Tanne, Kazuo

2014-03-01

Previous studies have revealed that orthodontic force affects dental pulp via the rupture of blood vessels and vacuolization of pulp tissues. We hypothesized that pulp tissues express inflammatory cytokines and regulators of odontoclast differentiation after excess orthodontic force. The purpose of this study was to investigate the effects of tensile force in human pulp cells and to measure inflammatory root resorption during tooth movement in pulpless rat teeth. After cyclic tensile force application in human pulp cells, gene expression and protein concentration of macrophage colony-stimulating factor, receptor activator of nuclear factor kappa-B ligand, interleukin-1 beta, and tumor necrosis factor alpha were determined by real-time polymerase chain reaction and enzyme-linked immunoassay. Moreover, the role of the stretch-activated channel was evaluated by gadolinium (Gd(3+)) treatment. The upper right first molars of 7-week Wistar rats were subjected to pulpectomy and root canal filling followed by mesial movement for 6 months. The expression of cytokine messenger RNAs and proteins in the experimental group peaked with loading at 10-kPa tensile force after 48 hours (P root resorption was significantly larger in the control teeth than the pulpectomized teeth (P root resorption during tooth movement. It also suggests that root canal treatment is effective for progressive severe inflammatory root resorption during tooth movement. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

A Comparison of Equivalent Doses of Lidocaine and Articaine in Maxillary Posterior Tooth Extractions: Case Series

Directory of Open Access Journals (Sweden)

Christopher C. Friedl

2012-06-01

Full Text Available Objectives: Local anaesthesia is the standard of care during dental extractions. With the advent of newer local anesthetic agents, it is often difficult for the clinician to decide which agent would be most efficacious in a given clinical scenario. This study assessed the efficacy of equal-milligram doses of lidocaine and articaine in achieving surgical anaesthesia of maxillary posterior teeth diagnosed with irreversible pulpitis. Material and Methods: This case-series evaluated a total of 41 patients diagnosed with irreversible pulpitis in a maxillary posterior tooth. Patients randomly received an infiltration of either 3.6 mL (72 mg 2% lidocaine with 1:100,000 epinephrine or 1.8 mL (72 mg 4% articaine with 1:100,000 epinephrine in the buccal fold and palatal soft tissue adjacent to the tooth. After 10 minutes, initial anaesthesia of the tooth was assessed by introducing a sterile 27-gauge needle into the gingival tissue adjacent to the tooth, followed by relief of the gingival cuff. Successful treatment was considered to have occurred when the tooth was extracted with no reported pain. Data was analyzed with the Fisher’s exact test, unpaired t-test and normality test. Results: Twenty-one patients received lidocaine and 20 received articaine. Forty of the 41 patients achieved initial anaesthesia 10 minutes after injection: 21 after lidocaine and 19 after articaine (P = 0.488. Pain-free extraction was accomplished in 33 patients: 19 after lidocaine and 14 after articaine buccal and palatal infiltrations (P = 0.226. Conclusions: There was no significant difference in efficacy between equivalent doses of lidocaine and articaine in the anaesthesia of maxillary posterior teeth with irreversible pulpitis.

Relative Composition of Fibrous Connective and Fatty/Glandular Tissue in Connective Tissue Grafts Depends on the Harvesting Technique but not the Donor Site of the Hard Palate.

Science.gov (United States)

Bertl, Kristina; Pifl, Markus; Hirtler, Lena; Rendl, Barbara; Nürnberger, Sylvia; Stavropoulos, Andreas; Ulm, Christian

2015-12-01

Whether the composition of palatal connective tissue grafts (CTGs) varies depending on donor site or harvesting technique in terms of relative amounts of fibrous connective tissue (CT) and fatty/glandular tissue (FGT) is currently unknown and is histologically assessed in the present study. In 10 fresh human cadavers, tissue samples were harvested in the anterior and posterior palate and in areas close to (marginal) and distant from (apical) the mucosal margin. Mucosal thickness, lamina propria thickness (defined as the extent of subepithelial portion of the biopsy containing ≤25% or ≤50% FGT), and proportions of CT and FGT were semi-automatically estimated for the entire mucosa and for CTGs virtually harvested by split-flap (SF) preparation minimum 1 mm deep or after deepithelialization (DE). Palatal mucosal thickness, ranging from 2.35 to 6.89 mm, and histologic composition showed high interindividual variability. Lamina propria thickness (P >0.21) and proportions of CT (P = 0.48) and FGT (P = 0.15) did not differ significantly among the donor sites (anterior, posterior, marginal, apical). However, thicker palatal tissue was associated with higher FGT content (P tissue composition in the hard palate, DE-harvested CTG contains much larger amounts of CT and much lower amounts of FGT than SF-harvested CTG, irrespective of the harvesting site.

Fluoridation and tooth wear in Irish adults.

LENUS (Irish Health Repository)

Burke, F M

2010-10-01

The aim of this study was to determine the prevalence of tooth wear in adults in Ireland and its relationship with water fluoridation. The National Survey of Adult Oral Health was conducted in 2000\\/2001. Tooth wear was determined using a partial mouth examination assessing the upper and lower anterior teeth. A total of 2456 subjects were examined. In this survey, increasing levels and severity of tooth wear were associated with ageing. Men were more affected by tooth wear and were more likely to be affected by severe tooth wear than women. It was found that age, and gender were significant predictors of tooth wear (P < 0.01). Overall, there was no significant relationship between fluoridation and tooth wear in this study.

Analysis of load distribution in tooth-implant supported fixed partial dentures by the use of resilient abutment.

Science.gov (United States)

Glisić, Mirko; Stamenković, Dragoslav; Grbović, Aleksandar; Todorović, Aleksandar; Marković, Aleksa; Trifković, Branka

2016-01-01

Differences between the tooth and implant response to load can lead to many biological and technical implications in the conditions of occlusal forces. The objective of this study was to analyze load distribution in tooth/implant-supported fixed partial dentures with the use of resilient TSA (Titan Shock Absorber, BoneCare GmbH, Augsburg, Germany) abutment and conventional non-resilient abutment using finite element method. This study presents two basic 3D models. For one model a standard non-resilient abutment is used, and on the implant of the second model a resilient TSA abutment is applied. The virtual model contains drawn contours of tooth, mucous membranes, implant, cortical bones and spongiosa, abutment and suprastructure. The experiment used 500 N of vertical force, applied in three different cases of axial load. Calculations of von Mises equivalent stresses of the tooth root and periodontium, implants and peri-implant tissue were made. For the model to which a non-resilient abutment is applied, maximum stress values in all three cases are observed in the cortical part of the bone (maximum stress value of 49.7 MPa). Measurements of stress and deformation in the bone tissue in the model with application of the resilientTSA abutment demonstrated similar distribution; however, these values are many times lower than in the model with non-resilient TSA abutment (maximum stress value of 28.9 MPa). Application of the resilient TSA abutment results in more equal distribution of stress and deformations in the bone tissue under vertical forces. These values are many times lower than in the model with the non-resilient abutment.

Effects of 45S5 bioglass on surface properties of dental enamel subjected to 35% hydrogen peroxide

OpenAIRE

Deng, Meng; Wen, Hai-Lin; Dong, Xiao-Li; Li, Feng; Xu, Xin; Li, Hong; Li, Ji-Yao; Zhou, Xue-Dong

2013-01-01

Tooth bleaching agents may weaken the tooth structure. Therefore, it is important to minimize any risks of tooth hard tissue damage caused by bleaching agents. The aim of this study was to evaluate the effects of applying 45S5 bioglass (BG) before, after, and during 35% hydrogen peroxide (HP) bleaching on whitening efficacy, physicochemical properties and microstructures of bovine enamel. Seventy-two bovine enamel blocks were prepared and randomly divided into six groups: distilled deionized ...

General evaluation of hard dental tissue and risk factors of dental caries in young people

Directory of Open Access Journals (Sweden)

Антоніна Михайлівна Політун

2016-04-01

Full Text Available The prognostication of caries in youth is important for determination and prescription of individual prophylactic arrangements and its further influence on mineralization of the hard dental tissues.Aim of the work: the study of the prevalence and intensity of caries among the young people and determination of possible connection with the risk factor of caries development for further choice of the reasonable prophylactic arrangement.Materials and methods of research: epidemiological, clinical, statistic ones.Results of research: The article describes results of the comprehensive dental examination of 135 persons18-25 years old. There was determined the high prevalence of caries (96,3±0,74 % with considerable intensity (8,87±0,39. The main etiological factors among youth are: poor nutrition with prevalence of carbohydrate (74,81±0,56 %, lack of oral hygiene (59,27±0,73 %, quantitative and qualitative composition of oral fluid, presence of somatic diseases (40±0,30 %, bad habits (31,85±0,24 %, neglect of the sport (48,88±0,36 %, chronic emotional stress (38,51±0,29 %, due to the increased workload and related stress factors.Conclusions: the high prevalence (96,3±0,74 % and intensity of carious process (8,87±0,39 is caused by the unsatisfactory state of oral cavity, (1,91±0,06, under the influence of general factors (somatic diseases, stress, poor nutrition the reactivity of protective mechanisms is lowered and the risk of dental morbidity of youth increases. So, it proves the necessity of elaboration and introduction of the active arrangements of primary prophylaxis directed on the raise of caries resistance of the hard dental tissues in young people

Noninvasive control of dental calculus removal: qualification of two fluorescence methods

Science.gov (United States)

Gonchukov, S.; Sukhinina, A.; Bakhmutov, D.; Biryukova, T.

2013-02-01

The main condition of periodontitis prevention is the full calculus removal from the teeth surface. This procedure should be fulfilled without harming adjacent unaffected tooth tissues. Nevertheless the problem of sensitive and precise estimating of tooth-calculus interface exists and potential risk of hard tissue damage remains. In this work it was shown that fluorescence diagnostics during calculus removal can be successfully used for precise noninvasive detection of calculus-tooth interface. In so doing the simple implementation of this method free from the necessity of spectrometer using can be employed. Such a simple implementation of calculus detection set-up can be aggregated with the devices of calculus removing.

Noninvasive control of dental calculus removal: qualification of two fluorescence methods

International Nuclear Information System (INIS)

Gonchukov, S; Sukhinina, A; Bakhmutov, D; Biryukova, T

2013-01-01

The main condition of periodontitis prevention is the full calculus removal from the teeth surface. This procedure should be fulfilled without harming adjacent unaffected tooth tissues. Nevertheless the problem of sensitive and precise estimating of tooth-calculus interface exists and potential risk of hard tissue damage remains. In this work it was shown that fluorescence diagnostics during calculus removal can be successfully used for precise noninvasive detection of calculus-tooth interface. In so doing the simple implementation of this method free from the necessity of spectrometer using can be employed. Such a simple implementation of calculus detection set-up can be aggregated with the devices of calculus removing.

The effect of Coca-Cola and fruit juices on the surface hardness of glass-ionomers and 'compomers'.

Science.gov (United States)

Aliping-McKenzie, M; Linden, R W A; Nicholson, J W

2004-11-01

The interaction of tooth-coloured dental restorative materials (a conventional glass-ionomer, two resin-modified glass-ionomers and two compomers) with acidic beverages has been studied with the aim of investigating how long-term contact affects solution pH and specimen surface hardness. For each material (ChemFil Superior, ChemFlex, Vitremer Core Build-Up/Restorative, Fuji II LC, Dyract AP and F2000) disc-shaped specimens were prepared and stored in sets of six in the following storage media: 0.9% NaCl (control), Coca-Cola, apple juice and orange juice. After time intervals of 1 day, 1 week, 1 month, 3 months, 4 months, 6 months and 1 year, solution pH and Vickers Hardness Number were determined for each individual specimen. Differences were analysed by anova followed by Student-Newman-Keuls post hoc analysis. All materials were found to reduce the pH of the 0.9% NaCl, but to increase the pH of the acidic beverages. The conventional glass-ionomers dissolved completely in apple juice and orange juice, but survived in Coca-Cola, albeit with a significantly reduced hardness after 1 year. The other materials survived in apple juice and orange juice, but showed greater reductions in surface hardness in these beverages than in Coca-Cola. Fruit juices were thus shown to pose a greater erosive threat to tooth coloured materials than Coca-Cola, a finding which is similar to those concerning dentine and enamel towards these drinks.

The use of platelet rich plasma in the treatment of immature tooth with periapical lesion: a case report

Directory of Open Access Journals (Sweden)

Günseli Güven Polat

2014-08-01

Full Text Available This study describes the treatment of an immature permanent tooth with periapical lesion which was treated with regenerative approach using platelet rich plasma (PRP. The root canal of immature human permanent tooth with periapical lesion was gently debrided of necrotic tissue and disinfected with 2.5% NaOCl, and then medicated with triple antibiotic paste comprised of ciprofloxacin, metronidazole, and tetracycline. When the tooth was asymptomatic, PRP and mineral trioxide aggregate (MTA were placed into the root canal. Six months after PRP treatment, radiographical examination revealed resolution of the radiolucency and progressive thickening of the root wall and apical closure. Our findings suggest that PRP can be used for the treatment of immature permanent teeth with periapical lesion, as part of a regenerative endodontic treatment procedure. Keywords: Immature permanent tooth; Periapical lesions; Platelet rich plasma

Tooth whitening: what we now know.

Science.gov (United States)

Carey, Clifton M

2014-06-01

Current research about tooth whitening shows that it is safe and effective when manufacturer's protocol is followed, yet there are risks of which the profession and users should be aware. This update provides a summary of current research and assessment of the safety and efficacy of tooth whitening regimens. Tooth whitening has become one of the most frequently requested dental procedures by the public. The public has come to demand whiter, more perfect smiles and in response many choices for tooth whitening have been made available. These include home-based products such as toothpastes, gels, and films, as well as in-office based systems where products containing highly concentrated bleaching agents are applied under professional supervision. The profession and public have been aware of certain risks related to tooth whitening such as increased tooth sensitivity and gingival irritation. New research has shown that there are other risks such as tooth surface roughening and softening, increased potential for demineralization, degradation of dental restorations, and unacceptable color change of dental restorations. The new research is also focused on optimizing whitening procedures to reduce tooth sensitivity and to increase the persistence of the whitening. Current reports in the literature are reviewed that are related to the use of peroxide based whitening methods. These reports include in vitro studies for method optimization and mechanism as well as clinical studies on effects of various whitening regimens. When manufacturer's instructions are followed, hydrogen peroxide and carbamide peroxide based tooth whitening is safe and effective. Patients should be informed of the risks associated with tooth whitening and instructed on identification of adverse occurrences so that they may seek professional help as needed. Copyright © 2014 Elsevier Inc. All rights reserved.

Managing Carious Lesions: Consensus Recommendations on Carious Tissue Removal.

Science.gov (United States)

Schwendicke, F; Frencken, J E; Bjørndal, L; Maltz, M; Manton, D J; Ricketts, D; Van Landuyt, K; Banerjee, A; Campus, G; Doméjean, S; Fontana, M; Leal, S; Lo, E; Machiulskiene, V; Schulte, A; Splieth, C; Zandona, A F; Innes, N P T

2016-05-01

The International Caries Consensus Collaboration undertook a consensus process and here presents clinical recommendations for carious tissue removal and managing cavitated carious lesions, including restoration, based on texture of demineralized dentine. Dentists should manage the disease dental caries and control activity of existing cavitated lesions to preserve hard tissues and retain teeth long-term. Entering the restorative cycle should be avoided as far as possible. Controlling the disease in cavitated carious lesions should be attempted using methods which are aimed at biofilm removal or control first. Only when cavitated carious lesions either are noncleansable or can no longer be sealed are restorative interventions indicated. When a restoration is indicated, the priorities are as follows: preserving healthy and remineralizable tissue, achieving a restorative seal, maintaining pulpal health, and maximizing restoration success. Carious tissue is removed purely to create conditions for long-lasting restorations. Bacterially contaminated or demineralized tissues close to the pulp do not need to be removed. In deeper lesions in teeth with sensible (vital) pulps, preserving pulpal health should be prioritized, while in shallow or moderately deep lesions, restoration longevity becomes more important. For teeth with shallow or moderately deep cavitated lesions, carious tissue removal is performed according toselective removal to firm dentine.In deep cavitated lesions in primary or permanent teeth,selective removal to soft dentineshould be performed, although in permanent teeth,stepwise removalis an option. The evidence and, therefore, these recommendations support less invasive carious lesion management, delaying entry to, and slowing down, the restorative cycle by preserving tooth tissue and retaining teeth long-term. © International & American Associations for Dental Research 2016.

Noninvasive computerized scanning method for the correlation between the facial soft and hard tissues for an integrated three-dimensional anthropometry and cephalometry.

Science.gov (United States)

Galantucci, Luigi Maria; Percoco, Gianluca; Lavecchia, Fulvio; Di Gioia, Eliana

2013-05-01

The article describes a new methodology to scan and integrate facial soft tissue surface with dental hard tissue models in a three-dimensional (3D) virtual environment, for a novel diagnostic approach.The facial and the dental scans can be acquired using any optical scanning systems: the models are then aligned and integrated to obtain a full virtual navigable representation of the head of the patient. In this article, we report in detail and further implemented a method for integrating 3D digital cast models into a 3D facial image, to visualize the anatomic position of the dentition. This system uses several 3D technologies to scan and digitize, integrating them with traditional dentistry records. The acquisitions were mainly performed using photogrammetric scanners, suitable for clinics or hospitals, able to obtain high mesh resolution and optimal surface texture for the photorealistic rendering of the face. To increase the quality and the resolution of the photogrammetric scanning of the dental elements, the authors propose a new technique to enhance the texture of the dental surface. Three examples of the application of the proposed procedure are reported in this article, using first laser scanning and photogrammetry and then only photogrammetry. Using cheek retractors, it is possible to scan directly a great number of dental elements. The final results are good navigable 3D models that integrate facial soft tissue and dental hard tissues. The method is characterized by the complete absence of ionizing radiation, portability and simplicity, fast acquisition, easy alignment of the 3D models, and wide angle of view of the scanner. This method is completely noninvasive and can be repeated any time the physician needs new clinical records. The 3D virtual model is a precise representation both of the soft and the hard tissue scanned, and it is possible to make any dimensional measure directly in the virtual space, for a full integrated 3D anthropometry and

Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy

International Nuclear Information System (INIS)

Bahreyni Toossi, M.T.; Ghorbani, Mahdi; Akbari, Fatemah; Sabet, Leila S.; Mehrpouyan, Mohammad

2016-01-01

The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm 2 applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam’s energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

Beeswax as dental filling on a neolithic human tooth.

Science.gov (United States)

Bernardini, Federico; Tuniz, Claudio; Coppa, Alfredo; Mancini, Lucia; Dreossi, Diego; Eichert, Diane; Turco, Gianluca; Biasotto, Matteo; Terrasi, Filippo; De Cesare, Nicola; Hua, Quan; Levchenko, Vladimir

2012-01-01

Evidence of prehistoric dentistry has been limited to a few cases, the most ancient dating back to the Neolithic. Here we report a 6500-year-old human mandible from Slovenia whose left canine crown bears the traces of a filling with beeswax. The use of different analytical techniques, including synchrotron radiation computed micro-tomography (micro-CT), Accelerator Mass Spectrometry (AMS) radiocarbon dating, Infrared (IR) Spectroscopy and Scanning Electron Microscopy (SEM), has shown that the exposed area of dentine resulting from occlusal wear and the upper part of a vertical crack affecting enamel and dentin tissues were filled with beeswax shortly before or after the individual's death. If the filling was done when the person was still alive, the intervention was likely aimed to relieve tooth sensitivity derived from either exposed dentine and/or the pain resulting from chewing on a cracked tooth: this would provide the earliest known direct evidence of therapeutic-palliative dental filling.

Beeswax as dental filling on a neolithic human tooth.

Directory of Open Access Journals (Sweden)

Federico Bernardini

Full Text Available Evidence of prehistoric dentistry has been limited to a few cases, the most ancient dating back to the Neolithic. Here we report a 6500-year-old human mandible from Slovenia whose left canine crown bears the traces of a filling with beeswax. The use of different analytical techniques, including synchrotron radiation computed micro-tomography (micro-CT, Accelerator Mass Spectrometry (AMS radiocarbon dating, Infrared (IR Spectroscopy and Scanning Electron Microscopy (SEM, has shown that the exposed area of dentine resulting from occlusal wear and the upper part of a vertical crack affecting enamel and dentin tissues were filled with beeswax shortly before or after the individual's death. If the filling was done when the person was still alive, the intervention was likely aimed to relieve tooth sensitivity derived from either exposed dentine and/or the pain resulting from chewing on a cracked tooth: this would provide the earliest known direct evidence of therapeutic-palliative dental filling.

The effect of three whitening oral rinses on enamel micro-hardness.

Science.gov (United States)

Potgieter, E; Osman, Y; Grobler, S R

2014-05-01

The purpose of this study was to determine the effect on human enamel micro-hardness of three over-the-counter whitening oral rinses available in South Africa. Enamel fragments were gathered into three groups of 15 each. One group was exposed to Colgate Plax Whitening Blancheur, the second group to White Glo 2 in 1 and the third to Plus White, in each case for periods recommended by the respective manufacturers. Surface micro-hardness of all groups was measured before and after a 14 day treatment period. pH levels of the oral rinses were also determined with a combination pH electrode. Pre- and post- treatment data were analysed by the Wilcoxon Signed Rank Sum Test. According to the micro-hardness values no significant (p > 0.05) enamel damage was found as a result of treatment. However, it was observed that Colgate Pax and White Glo decreased the enamel hardness, an early sign of enamel damage, while Plus White showed a small increase in hardness. The three whitening oral rinses on the South African market do not damage the tooth enamel significantly when used as recommended by the manufacturers. However, extending the contact period and increasing the frequency of application might lead to damage of enamel.

Evolution of high tooth replacement rates in sauropod dinosaurs.

Science.gov (United States)

D'Emic, Michael D; Whitlock, John A; Smith, Kathlyn M; Fisher, Daniel C; Wilson, Jeffrey A

2013-01-01

Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days). Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size), and derived titanosaurs and diplodocoids independently evolved the highest known tooth replacement rates among archosaurs.

Evolution of high tooth replacement rates in sauropod dinosaurs.

Directory of Open Access Journals (Sweden)

Michael D D'Emic

Full Text Available BACKGROUND: Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. METHODOLOGY/PRINCIPAL FINDINGS: We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days. Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. CONCLUSIONS/SIGNIFICANCE: Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size, and derived titanosaurs and

Regenerative treatment of an immature, traumatized tooth with apical periodontitis: report of a case.

Science.gov (United States)

Cotti, Elisabetta; Mereu, Manuela; Lusso, Daniela

2008-05-01

This case report describes the treatment of a necrotic immature permanent central incisor with complete crown fracture, suspected root fracture, and sinus tract, which was not treated with conventional apexification techniques. Instead, a regenerative approach based on the trauma literature's methods for revascularization was provided. The root canal was gently debrided of necrotic tissue with a sharp spoon excavator and irrigated for only one third of its length with NaOCl and then medicated with calcium hydroxide. After 15 days the sinus tract had healed, and the tooth was asymptomatic. The tooth was accessed, calcium hydroxide was removed, bleeding was stimulated to form an intracanal blood clot, and mineral trioxide aggregate was placed coronally to the blood clot. After 8 months, a coronal calcified barrier was radiographically evident and accompanied with progressive thickening of the root wall and apical closure. Two and a half years after treatment was initiated, the tooth remained asymptomatic, and the sinus tract had not reappeared. The progressive increase in the thickness of the dentinal walls and subsequent apical development suggest that appropriate biologic responses can occur with this type of treatment of the necrotic immature permanent tooth with sinus tract.

Epithelial topography for repetitive tooth formation

Directory of Open Access Journals (Sweden)

Marcia Gaete

2015-12-01

Full Text Available During the formation of repetitive ectodermally derived organs such as mammary glands, lateral line and teeth, the tissue primordium iteratively initiates new structures. In the case of successional molar development, new teeth appear sequentially in the posterior region of the jaw from Sox2+ cells in association with the posterior aspect of a pre-existing tooth. The sequence of molar development is well known, however, the epithelial topography involved in the formation of a new tooth is unclear. Here, we have examined the morphology of the molar dental epithelium and its development at different stages in the mouse in vivo and in molar explants. Using regional lineage tracing we show that within the posterior tail of the first molar the primordium for the second and third molar are organized in a row, with the tail remaining in connection with the surface, where a furrow is observed. The morphology and Sox2 expression of the tail retains characteristics reminiscent of the earlier stages of tooth development, such that position along the A-P axes of the tail correlates with different temporal stages. Sox9, a stem/progenitor cell marker in other organs, is expressed mainly in the suprabasal epithelium complementary with Sox2 expression. This Sox2 and Sox9 expressing molar tail contains actively proliferating cells with mitosis following an apico-basal direction. Snail2, a transcription factor implicated in cell migration, is expressed at high levels in the tip of the molar tail while E-cadherin and laminin are decreased. In conclusion, our studies propose a model in which the epithelium of the molar tail can grow by posterior movement of epithelial cells followed by infolding and stratification involving a population of Sox2+/Sox9+ cells.

Gingival-colored Porcelain: A Clinical Report of an Esthetic-prosthetic Paradigm.

Science.gov (United States)

Sonune, Shital Jalandar; Kumar, Shiv; Jadhav, Manish Shivaji; Martande, Santosh

2017-01-01

Traditionally, periodontics has been instrumental in treating hard- and soft-tissue defect. Surgical and regenerative periodontal procedures can reconstruct the three-dimensional architecture of the hard- and soft-tissue defect. However, at times, these invasive procedures leave the patients with an esthetic problem. In such situations, the defects can be treated by the prosthetic approach. A predictable esthetically pleasing and functional outcome without any surgical procedure is being a choice of treatment for many. This article discusses about the treatment for the defect of excessive hard and soft tissue, using porcelain fused to a metal restoration with gingival-colored porcelain for both tooth-supported and implant-supported fixed prosthesis.

Gingival-colored Porcelain: A Clinical Report of an Esthetic-prosthetic Paradigm

Science.gov (United States)

Sonune, Shital Jalandar; Kumar, Shiv; Jadhav, Manish Shivaji; Martande, Santosh

2017-01-01

Traditionally, periodontics has been instrumental in treating hard- and soft-tissue defect. Surgical and regenerative periodontal procedures can reconstruct the three-dimensional architecture of the hard- and soft-tissue defect. However, at times, these invasive procedures leave the patients with an esthetic problem. In such situations, the defects can be treated by the prosthetic approach. A predictable esthetically pleasing and functional outcome without any surgical procedure is being a choice of treatment for many. This article discusses about the treatment for the defect of excessive hard and soft tissue, using porcelain fused to a metal restoration with gingival-colored porcelain for both tooth-supported and implant-supported fixed prosthesis. PMID:29308371

Tooth supported overdenture: A concept overshadowed but not yet forgotten!

OpenAIRE

Rupandeep Kaur Samra; Shreenivas Vasant Bhide; Chhavi Goyal; Taranjit Kaur

2015-01-01

The concept of conventional tooth-retained overdentures is a simple and cost effective treatment than the implant overdentures. When few firm teeth are present in an otherwise compromised dentition, they can be retained and used as abutments for overdenture fabrication. This helps improve the retention and stability of the final prosthesis significantly. Bone is a dynamic tissue. The extraction of teeth results in the initiation of the bone resorption pattern. However, when tensile stress is ...

Orthodontic-periodontal interactions: Orthodontic extrusion in interdisciplinary regenerative treatments.

Science.gov (United States)

Paolone, Maria Giacinta; Kaitsas, Roberto

2018-06-01

Orthodontics is a periodontal treatment. "Guided orthodontic regeneration" (GOR) procedures use orthodontic movements in perio-restorative patients. The GOR technique includes a guided orthodontic "soft tissue" regeneration (GOTR) and a guided orthodontic "bone" regeneration (GOBR) with a plastic soft tissue approach and a regenerating reality. The increased amount of soft tissue gained with orthodontic movement can be used for subsequent periodontal regenerative techniques. The increased amount of bone can as well improve primary implant stability and, eventually, simplify a GTR technique to regenerate soft tissues, to restore tooth with external resorption in aesthetic zone or to extract a tooth to create new hard-soft tissue for adjacent teeth. Copyright © 2018. Published by Elsevier Masson SAS.

THE EFFECTS OF MAXILLARY EXPANSION ON THE SOFT TISSUE FACIAL PROFILE

Directory of Open Access Journals (Sweden)

Işıl ARAS

2017-10-01

Full Text Available Purpose: The aims of this retrospective study were to evaluate the possible changes in soft tissue facial profile induced by orthopedic rapid maxillary expansion (RME and surgically assisted rapid maxillary expansion (SARME, and to correlate them with the underlying hard tissue alterations. Materials and Methods: 16 patients who received bone borne SARME and 25 patients who were subjected to RME using metal cast splint hyrax appliance were analyzed retrospectively. This research was conducted on lateral cephalometric radiographs taken on 2 occasions: before expansion (T1 and at the beginning of any further orthodontic treatment (T2. Investigated lateral cephalometric parameters consisted of Holdaway soft tissue measurements with some supplementary soft tissue, skeletal and dental assessments. Results: The acquisition of T2 cephalograms which conforms to the initiation of further orthodontic treatment corresponded to 83.25±3.51 days for SARME and 85.68±4.37 days for RME after the expansion was completed. The only significant change in soft tissue profile of the SARME group was a decrease in upper lip thickness (p<0.05, whereas in the RME group, decrease in soft tissue facial profile angle and increase in H angle were found to be statistically significant (p<0.05 for each. For the RME group, the changes in soft tissue facial profile angle and H angle correlated only with the changes in SNB angle (p<0.05. Conclusion: While bone-borne SARME did not seem to possess the potential to alter soft tissue profile, tooth-borne RME caused a more convex soft tissue profile related to a reduction in SNB.

Endodontic Treatment of an Anomalous Anterior Tooth with the Aid of a 3-dimensional Printed Physical Tooth Model.

Science.gov (United States)

Byun, Chanhee; Kim, Changhwan; Cho, Seungryong; Baek, Seung Hoon; Kim, Gyutae; Kim, Sahng G; Kim, Sun-Young

2015-06-01

Endodontic treatment of tooth formation anomalies is a challenge to clinicians and as such requires a complete understanding of the aberrant root canal anatomy followed by careful root canal disinfection and obturation. Here, we report the use of a 3-dimensional (3D) printed physical tooth model including internal root canal structures for the endodontic treatment of a challenging tooth anomaly. A 12-year-old boy was referred for endodontic treatment of tooth #8. The tooth showed class II mobility with swelling and a sinus tract in the buccal mucosa and periapical radiolucency. The tooth presented a very narrow structure between the crown and root by distal concavity and a severely dilacerated root. Moreover, a perforation site with bleeding and another ditching site were identified around the cervical area in the access cavity. A translucent physical tooth model carrying the information on internal root canal structures was built through a 3-step process: data acquisition by cone-beam computed tomographic scanning, virtual modeling by image processing, and manufacturing by 3D printing. A custom-made guide jig was then fabricated to achieve a safe and precise working path to the root canal. Endodontic procedures including access cavity preparation were performed using the physical tooth model and the guide jig. At the 7-month follow-up, the endodontically treated tooth showed complete periapical healing with no clinical signs and symptoms. This case report describes a novel method of endodontic treatment of an anomalous maxillary central incisor with the aid of a physical tooth model and a custom-made guide jig via 3D printing technique. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Teeth as biomonitors of selenium concentrations in tissues of beluga whales (Delphinapterus leucas)

International Nuclear Information System (INIS)

Kinghorn, April; Humphries, Murray M.; Outridge, Peter; Chan, Hing Man

2008-01-01

Selenium (Se) is an essential element which has been shown to play an important role in protecting marine mammals against the toxic effects of mercury (Hg) and other metals. It has been suggested that metal concentration in marine mammal teeth can potentially be used as bioindicators for body burden. The objective of this study was to investigate the relationship between Se concentrations in beluga (Delphinapterus leucas) teeth and those previously measured in soft tissues (liver, kidney, muscle and muktuk). Tooth Hg concentrations are also measured, and the relationships between Se and Hg in teeth and soft tissues are examined. Se in the teeth of beluga was measured using hydride generation atomic fluorescence spectrometry (HG-AFS) and Hg in beluga teeth was measured by cold-vapour atomic absorption. Tooth Se concentrations ranged from 108 ng/g to 245 ng/g dry weight, and tooth Hg concentrations ranged from 10 to 189 ng/g dry weight. In the soft tissues, Se concentrations were highest in the liver, followed by kidney, muktuk, and muscle. There were significant correlations between tooth Se concentrations and animal age, tooth Se and liver and muscle Se, and between liver Se and animal age. The molar ratio of Hg:Se in the liver was found to be 0.70. This study is the first to measure Se in the teeth of a marine mammal species, and HG-AFS is found to be an effective technique for determining Se in beluga teeth. Tooth Se can be used as predictor for liver and muscle Se, although these relationships may be strongly influenced by the association of Se with Hg in marine mammal tissues. This study contributes to an increased understanding of the storage and metabolism of Se in marine mammals

Teeth as biomonitors of selenium concentrations in tissues of beluga whales (Delphinapterus leucas)

Energy Technology Data Exchange (ETDEWEB)

Kinghorn, April [Centre for Indigenous Peoples Nutrition and Environment, Macdonald Campus, McGill University, 21-111 Lakeshore Road, Ste. Anne-de-Bellevue, Quebec, H9X 3V9 (Canada); Humphries, Murray M. [Centre for Indigenous Peoples Nutrition and Environment, Macdonald Campus, McGill University, 21-111 Lakeshore Road, Ste. Anne-de-Bellevue, Quebec, H9X 3V9 (Canada); Department of Natural Resource Science, Macdonald Campus, McGill University, 21-111 Lakeshore Road, Ste. Anne-de-Bellevue, Quebec, H9X 3V9 (Canada); Outridge, Peter [Geological Survey of Canada, 601 Booth Street, Ottawa, Ontario, K1A 0E8 (Canada); Chan, Hing Man [Community Health Sciences Program, University of Northern British Columbia, 3333 University Way, Prince George, British Columbia, V2N 4Z9 (Canada)], E-mail: lchan@unbc.ca

2008-08-25

Selenium (Se) is an essential element which has been shown to play an important role in protecting marine mammals against the toxic effects of mercury (Hg) and other metals. It has been suggested that metal concentration in marine mammal teeth can potentially be used as bioindicators for body burden. The objective of this study was to investigate the relationship between Se concentrations in beluga (Delphinapterus leucas) teeth and those previously measured in soft tissues (liver, kidney, muscle and muktuk). Tooth Hg concentrations are also measured, and the relationships between Se and Hg in teeth and soft tissues are examined. Se in the teeth of beluga was measured using hydride generation atomic fluorescence spectrometry (HG-AFS) and Hg in beluga teeth was measured by cold-vapour atomic absorption. Tooth Se concentrations ranged from 108 ng/g to 245 ng/g dry weight, and tooth Hg concentrations ranged from 10 to 189 ng/g dry weight. In the soft tissues, Se concentrations were highest in the liver, followed by kidney, muktuk, and muscle. There were significant correlations between tooth Se concentrations and animal age, tooth Se and liver and muscle Se, and between liver Se and animal age. The molar ratio of Hg:Se in the liver was found to be 0.70. This study is the first to measure Se in the teeth of a marine mammal species, and HG-AFS is found to be an effective technique for determining Se in beluga teeth. Tooth Se can be used as predictor for liver and muscle Se, although these relationships may be strongly influenced by the association of Se with Hg in marine mammal tissues. This study contributes to an increased understanding of the storage and metabolism of Se in marine mammals.

Primary culprit for tooth loss!!

OpenAIRE

Nuvvula, Sailavanya; Chava, Vijay Kumar; Nuvvula, Sivakumar

2016-01-01

Aim: In order to facilitate planning for dental health services and to progress strategies to continue the reduction in tooth loss, it is important to identify the factors that result in such loss. therefore the aim of the study is to investigate the major cause for tooth extraction. Objective: to examine whether the major reason for tooth extraction is dental caries or periodontal disease. Materials and Methods: The study is carried out among the dental practitioners in our district. A quest...

Does common prescription medication affect the rate of orthodontic tooth movement? A systematic review.

Science.gov (United States)

Makrygiannakis, Militiadis A; Kaklamanos, Eleftherios G; Athanasiou, Athanasios E

2018-03-06

As the taking of any medication may theoretically affect the complex pathways responsible for periodontal tissue homeostasis and the events leading to orthodontic tooth movement, it is considered important for the orthodontist to be able to identify prospective patients' history and patterns of pharmaceutical consumption. To systematically investigate and appraise the quality of the available evidence regarding the effect of commonly prescribed medications on the rate of orthodontic tooth movement. Search without restrictions in eight databases and hand searching until June 2017. Controlled studies investigating the effect of commonly prescribed medications with emphasis on the rate of orthodontic tooth movement. Following study retrieval and selection, relevant data was extracted and the risk of bias was assessed using the SYRCLE's Risk of Bias Tool. Twenty-seven animal studies, involving various pharmacologic and orthodontic interventions, were finally identified. Most studies were assessed to be at unclear or high risk of bias. The rate of orthodontic tooth movement was shown to increase after the administration of diazepam, Vitamin C and pantoprazole, while simvastatin, atorvastatin, calcium compounds, strontium ranelate, propranolol, losartan, famotidine, cetirizine, and metformin decreased the rate of orthodontic tooth movement. No interference with the rate of orthodontic tooth movement was reported for phenytoin, phenobarbital and zinc compounds, whereas, inconsistent or conflicting effects were noted after the administration of L-thyroxine, lithium compounds, fluoxetine and insulin. The quality of the available evidence was considered at best as low. Commonly prescribed medications may exhibit variable effects on the rate of orthodontic tooth movement. Although the quality of evidence was considered at best as low, raising reservations about the strength of the relevant recommendations, the clinician should be capable of identifying patients taking

Degenerative alterations of the cementum-periodontal ligament complex and early tooth loss in a young patient with periodontal disease.

Science.gov (United States)

Petruţiu, S A; Buiga, Petronela; Roman, Alexandra; Danciu, Theodora; Mihu, Carmen Mihaela; Mihu, D

2012-01-01

Premature exfoliation of primary or permanent teeth in children or adolescents is extremely rare and it can be a manifestation of an underlying systemic disease. This study aims to present the histological aspects associated with early tooth loss in a case of periodontal disease developed without local inflammation and with minimal periodontal pockets and attachment loss. The maxillary left second premolar was extracted together with a gingival collar attached to the root surface. The histological analysis recorded the resorption of the cementum in multiple areas of the entire root surface with the connective tissue of the desmodontium invading the lacunae defects. The connective tissue rich in cells occupied the periodontal ligamentar space and the resorptive areas. No inflammation was obvious in the periodontal ligament connective tissue. This report may warn clinicians about the possibility of the association of cemental abnormalities with early tooth loss.

Photobiomodulation of mesenchymal stem cells encapsulated in an injectable rhBMP4-loaded hydrogel directs hard tissue bioengineering.

Science.gov (United States)

Diniz, Ivana M A; Carreira, Ana C O; Sipert, Carla R; Uehara, Cindi M; Moreira, Maria S N; Freire, Laila; Pelissari, Cibele; Kossugue, Patrícia M; de Araújo, Daniele R; Sogayar, Mari C; Marques, Márcia M

2018-06-01

Photobiomodulation (PBM) therapy displays relevant properties for tissue healing and regeneration, which may be of interest for the tissue engineering field. Here, we show that PBM is able to improve cell survival and to interact with recombinant human Bone Morphogenetic Protein 4 (rhBMP4) to direct and accelerate odonto/osteogenic differentiation of dental derived mesenchymal stem cells (MSCs). MSCs were encapsulated in an injectable and thermo-responsive cell carrier (Pluronic ® F-127) loaded with rhBMP4 and then photoactivated. PBM improved MSCs self-renewal and survival upon encapsulation in the Pluronic ® F-127. In the presence of rhBMP4, cell odonto/osteogenic differentiation was premature and markedly improved in the photoactivated MSCs. An in vivo calvarial critical sized defect model demonstrated significant increase in bone formation after PBM treatment. Finally, a balance in the reactive oxygen species levels may be related to the favorable results of PBM and rhBMP4 association. PBM may act in synergism with rhBMP4 and is a promise candidate to direct and accelerate hard tissue bioengineering. © 2017 Wiley Periodicals, Inc.

Application of Induced Pluripotent Stem Cells Reprogrammed from Dental Pulp Cells: a Novel Approach for Tooth Regeneration

Directory of Open Access Journals (Sweden)

Xiaoyan Zhou

2011-03-01

Full Text Available Introduction: Candidate human dental stem/progenitor cells have been isolated and charac-terized from dental tissues and shown to hold the capability to differentiate into tooth-generating cells. However, ad-vances in engineering a whole tooth by these stem cells are hindered by various factors, such as the poor availability of human primitive tooth bud stem cells, difficulties in isolating and purifying dental mesenchymal stem cells and ethical controversies when using embryonic oral epithelium. As a result it is meaningful to find other autologous dental cells for the purpose of reconstructing a tooth.The hypothesis: Previous studies demonstrated that somatic cells can be reprogrammed into induced pluripotent stem cells by ex-ogenous expression Oct-4 and Sox-2. On the basis of these findings we can reasonably hypothesize that when transfected with specific transcription factors Oct-4 and Sox-2, dental pulp cells, the main cell in pulp, could also be reprogrammed into induced pluripotent stem cells, which are considered to be of best potential to regenerate a whole tooth. Evaluation of the hypothesis: After transfection with Oct-4 and Sox-2 into human dental pulp cells, the positive colonies are isolated and then identified according to the characteristics of iPS cells. These cells are further investigated the capability in differentiating into ameloblasts and odontoblasts and finally seeded onto the sur-face of a tooth-shaped biodegradable polymer scaffold to detect the ability of constructing a bioengineered tooth.

Atypical Odontalgia (Phantom Tooth Pain)

Science.gov (United States)

... atypical facial pain, phantom tooth pain, or neuropathic orofacial pain, is characterized by chronic pain in a tooth ... such as a specialist in oral medicine or orofacial pain. The information contained in this monograph is for ...

Determination of orthodontic tooth movement and tissue reaction following demineralized freeze-dried bone allograft grafting intervention

Directory of Open Access Journals (Sweden)

Massoud Seifi

2012-01-01

Full Text Available Background: Socket preservation after tooth extraction is one of the indications of bone grafting to enhance preorthodontic condition. The aim of this study is to determine the effects of socket preservation on the immediate tooth movement, alveolar ridge height preservation and orthodontic root resorption. Materials and Methods: In a split-mouth technique, twelve sites in three dogs were investigated as an experimental study. Crushed demineralized freeze-dried bone allograft (DFDBA (CenoBone® was used as the graft material. The defects were made by the extraction of 3 rd premolar. On one side of each jaw, the defects were preserved by DFDBA and defects of the other side left opened as the control group. Simultaneously the teeth adjacent to the defects were pulled together by a NiTi coil spring. After eight weeks, the amount of (OTM, alveolar height, and root resorption were measured. Analysis of variance was used for purpose of comparison. Results: There was a slight increase in OTM at grafted sites as they were compared to the control sites (P<0.05. Also a significant bone resorption in control site and successful socket preservation in experimental site were observed. Reduction of root resorption at the augmented site was significant compared to the normal healing site (P<0.05. Conclusion: Using socket preservation, tooth movement can be immediately started without waiting for the healing of the recipient site. This can provide some advantages like enhanced rate of OTM, its approved effects on ridge preservation that reduces the chance of dehiscence and the reduction of root resorption.

The influence of topical application of grapeseed extract gel on enamel surface hardness after demineralization

Science.gov (United States)

Saragih, D. A.; Herda, E.; Triaminingsih, S.

2017-08-01

The aim of this study was to analyze the influence of topical application of 6.5% and 12.5% grapeseed extract gels for duration of application 16 and 32 minutes on the enamel surface hardness following tooth demineralization by an energy drink. The samples were 21 bovine teeth that underwent demineralization by immersion in the energy drink for 5 minutes in an incubator at 37°C. The demineralized specimens were randomly divided into a control group and 2 treatment groups. The control group was immersed in artificial saliva for 6 hours at 37°C, whereas the treatment groups were treated with topical 6.5% and 12.5% grapeseed extract gels for durations of 16 and 32 minutes and then immersed in artificial saliva for 6 hours at 37°C. The hardness was measured with a Knoop hardness tester. Statistical analysis by repeated ANOVA and one-way ANOVA revealed a significant increase in the enamel hardness value (p0.05).

The irradiation action on human dental tissue by X-rays and electrons. A nanoindenter study

Energy Technology Data Exchange (ETDEWEB)

Fraenzel, Wolfgang [Halle-Wittenberg Univ., Halle (Germany). Dept. of Physics; Gerlach, Reinhard [Halle-Wittenberg Univ., Halle (Germany). Clinic of Radiation Therapy

2009-07-01

It is known that ionizing radiation is used in medicine for Roentgen diagnostics and for radiation therapy. The radiation interacts with matter, in particular with biological one, essentially by scattering, photoelectric effect, Compton effect and pair production. To what extent the biological material is changed thereby, depends on the type and the amount of radiation energy, on the dose and on the tissue constitution. In modern radiation therapy two different kinds of radiation are used: high energy X-rays and electron radiation. In the case of head-neck tumors the general practice is an irradiation with high energy X-rays with absorbed dose to water up to 70 Gy. Teeth destruction has been identified as a side effect during irradiation. In addition, damage to the salivary glands is often observed which leads to a decrease or even the complete loss of the salivary secretion (xerostomia). This study shows how the different energy and radiation types damage the tooth tissue. The effects of both, high X-ray energy and high energy electrons, on the mechanical properties hardness and elasticity of the human dental tissue are measured by the nanoindentation technique. We compare these results with the effect of the irradiation of low X-ray energy on the dental tissue. (orig.)

The irradiation action on human dental tissue by X-rays and electrons. A nanoindenter study

International Nuclear Information System (INIS)

Fraenzel, Wolfgang; Gerlach, Reinhard

2009-01-01

It is known that ionizing radiation is used in medicine for Roentgen diagnostics and for radiation therapy. The radiation interacts with matter, in particular with biological one, essentially by scattering, photoelectric effect, Compton effect and pair production. To what extent the biological material is changed thereby, depends on the type and the amount of radiation energy, on the dose and on the tissue constitution. In modern radiation therapy two different kinds of radiation are used: high energy X-rays and electron radiation. In the case of head-neck tumors the general practice is an irradiation with high energy X-rays with absorbed dose to water up to 70 Gy. Teeth destruction has been identified as a side effect during irradiation. In addition, damage to the salivary glands is often observed which leads to a decrease or even the complete loss of the salivary secretion (xerostomia). This study shows how the different energy and radiation types damage the tooth tissue. The effects of both, high X-ray energy and high energy electrons, on the mechanical properties hardness and elasticity of the human dental tissue are measured by the nanoindentation technique. We compare these results with the effect of the irradiation of low X-ray energy on the dental tissue. (orig.)

Tooth breakage in patients injected with 224Ra

International Nuclear Information System (INIS)

Sonnabend, E.; Spiess, H.; Mays, C.W.

1986-01-01

Tooth breakage has been common among the 224 Ra patients, especially those injected as teenagers. The fracture of 1 or more teeth was reported by 26% (8/31) of boys and 23% (7/30) of girls injected with 224 Ra at 16-20 years of age. Combining results from all age groups, the incidence of tooth fractures increased significantly with dose (P=0.01). Unlike the normal loss of permanent teeth by periodontal disease, in which the entire tooth is lost, the tooth loss following 224 Ra injection was primarily from tooth resorption near the gum line causing the tooth crowns to break off easily. Eventually the tooth roots may either become incorporated into the jawbone or are resorbed and replaced with bone. These tooth fractures resembled those observed in the U.S. radium dial painters and in dogs injected with bone-seeking α-emitters. (orig.)

Immediate implant placement and restoration in the anterior maxilla: Tissue dimensional changes after 2-5 year follow up.

Science.gov (United States)

Arora, Himanshu; Khzam, Nabil; Roberts, David; Bruce, William L; Ivanovski, Saso

2017-08-01

Immediate implant placement followed by an immediate restoration has proven to be a viable technique in the anterior maxillary region. This prospective study evaluated the mid-long term (2-5 years) tissue changes around immediately placed and restored implants in the anterior maxilla using flapless surgery and simultaneous hard tissue augmentation. Thirty AstraTech implants were immediately placed in 30 patients, followed by the delivery of an immediate provisional restoration on the same day. All participating 30 patients underwent the same treatment strategy that involved flapless removal of a failing maxillary anterior tooth, immediate implant placement, simultaneous augmentation with a deproteinized particulate xenograft, followed by the connection of a screw-retained provisional restoration. Radiographs and photographs were used to measure hard and soft tissue changes. Aesthetic evaluation was performed using the Pink Esthetic Score (PES). All implants remained osseointegrated during the follow up period of 2-5 years (mean 47 ± 15 months). Twelve of the thirty patients completed the 5 year follow up. Radiographic evaluation revealed average gains in bone levels of 0.18 and 0.34 mm mesially and distally, respectively. Soft tissue evaluation showed a mean tissue loss of 0.05 ± 0.64 mm and 0.16 ± 0.63 mm at the mesial and distal papillae, respectively, while mid-facial mucosal recession was 0.29 ± 0.74 mm. A significant improvement in the Pink Esthetic Scores was seen at the final follow-up (mean PES 11.50), as compared to the baseline (mean PES 10.27) (P = .001). In addition to a favorable implant success rate and peri-implant bony response, the soft tissue levels and overall aesthetics around single immediately placed and restored implants can also be maintained in the mid-long term. © 2017 Wiley Periodicals, Inc.

[Fluorescence control of dental calculus removal].

Science.gov (United States)

Bakhmutov, D N; Gonchukov, S A; Lonkina, T V; Sukhinina, A V

2012-01-01

The main condition of periodontitis prevention is the full calculus removal from the teeth surface. This procedure should be fulfilled without harming adjacent unaffected tooth tissues. Nevertheless the problem of sensitive and precise estimating of tooth-calculus interface exists and potential risk of hard tissue damage remains. In the frames of this work it was shown that fluorescence diagnostics during calculus removal can be successfully used for precise detection of tooth-calculus interface. In so doing the simple implementation of this method free from the necessity of spectrometer using can be employed. Such a simple implementation of calculus detection set-up can be aggregated with the devices of calculus removing (as ultrasonic or laser devices).

Effect of a self-adhesive coating on the load-bearing capacity of tooth-coloured restorative materials.

Science.gov (United States)

Bagheri, R; Palamara, Jea; Mese, A; Manton, D J

2017-03-01

The aim of this study was to compare the flexural strength and Vickers hardness of tooth-coloured restorative materials with and without applying a self-adhesive coating for up to 6 months. Specimens were prepared from three resin composites (RC), two resin-modified glass-ionomer cements (RM-GIC) and two conventional glass-ionomer cements (CGIC). All materials were tested both with and without applying G-Coat Plus (GCP). Specimens were conditioned in 37 °C distilled deionized water for 24 h, and 1, 3 and 6 months. The specimens were strength tested using a four-point bend test jig in a universal testing machine. The broken specimen's halves were used for Vickers hardness testing. Representative specimens were examined under an environmental scanning electron microscope. Data analysis showed that regardless of time and materials, generally the surface coating was associated with a significant increase in the flexural strength of the materials. Applying the GCP decreased the hardness of almost all materials significantly (P < 0.05) and effect of time intervals on hardness was material dependent. The load-bearing capacity of the restorative materials was affected by applying self-adhesive coating and ageing. The CGIC had significantly higher hardness but lower flexural strength than the RM-GIC and RC. © 2016 Australian Dental Association.

Fibrin glue mixed with platelet-rich fibrin as a scaffold seeded with dental bud cells for tooth regeneration.

Science.gov (United States)

Yang, Kai-Chiang; Wang, Chun-Hao; Chang, Hao-Hueng; Chan, Wing P; Chi, Chau-Hwa; Kuo, Tzong-Fu

2012-11-01

Odontogenesis is a complex process with a series of epithelial-mesenchymal interactions and odontogenic molecular cascades. In tissue engineering of teeth from stem cells, platelet-rich fibrin (PRF), which is rich in growth factors and cytokines, may improve regeneration. Accordingly, PRF was added into fibrin glue to enrich the microenvironment with growth factors. Unerupted second molar tooth buds were harvested from miniature swine and cultured in vitro for 3 weeks to obtain dental bud cells (DBCs). Whole blood was collected for the preparation of PRF and fibrin glue before surgery. DBCs were suspended in fibrin glue and then enclosed with PRF, and the DBC-fibrin glue-PRF composite was autografted back into the original alveolar sockets. Radiographic and histological examinations were used to identify the regenerated tooth structure 36 weeks after implantation. Immunohistochemical staining was used to detect proteins specific to tooth regeneration. One pig developed a complete tooth with crown, root, pulp, enamel, dentin, odontoblast, cementum, blood vessels, and periodontal ligaments in indiscriminate shape. Another animal had an unerupted tooth that expressed cytokeratin 14, dentin matrix protein-1, vascular endothelial growth factor, and osteopontin. This study demonstrated, using autogenic cell transplantation in a porcine model, that DBCs seeded into fibrin glue-PRF could regenerate a complete tooth. Copyright © 2011 John Wiley & Sons, Ltd.

[Effects of tooth whitening agents and acidic drinks on the surface properties of dental enamel].

Science.gov (United States)

Chen, Xiaoling; Chen, Zhiqun; Lin, Yao; Shao, Jinquan; Yin, Lu

2013-10-01

Using tooth whitening agents (bleaching clip) in vitro and acidic drinks, we conducted a comparative study of the changes in enamel surface morphology, Ca/P content, and hardness. Tooth whitening glue pieces, cola, and orange juice were used to soak teeth in artificial saliva in vitro. Physiological saline was used as a control treatment. The morphology of the four groups was observed under a scanning electron microscope (SEM) immediately after the teeth were soaked for 7 and 14 d. The changes in Ca/P content and microhardness were analyzed. The enamel surfaces of the teeth in the three test groups were demineralized. The Ca/P ratio and the average microhardness were significantly lower than those of the control group immediately after the teeth were soaked (P 0.05). Bleaching agents caused transient demineralization of human enamel, but these agents could induce re-mineralization and repair of enamel over time. Demineralization caused by bleaching covered a relatively normal range compared with acidic drinks and daily drinking.

Regenerative Endodontic Treatment with Orthodontic Treatment in a Tooth with Dens Evaginatus: A Case Report with a 4-year Follow-up.

Science.gov (United States)

Natera, Marianella; Mukherjee, Padma M

2018-06-01

Dens evaginatus is a developmental tooth anomaly in which an extra cusp or tubercle protrudes on the occlusal surface of the tooth along with some pulpal tissue. Because of the fragile nature of the protrusion, these teeth are often at risk of pulpal exposure. When this occurs in an immature tooth, regenerative endodontic treatment may be a good treatment approach to promote root formation. There is limited literature that documents the occurrence of orthodontic treatment in teeth that have undergone regenerative endodontic therapy using triple antibiotic paste. Here we present a case of an immature premolar tooth with dens evaginatus that was diagnosed with pulp necrosis and chronic apical abscess. The tooth was treated with regenerative endodontic treatment; after which, the patient received orthodontic treatment with fixed appliances for 2 years. The tooth responded favorably to the regenerative endodontic treatment and orthodontic tooth movement. Clinically and radiographically, all the follow-up examinations revealed an asymptomatic tooth with evidence of periapical healing with stunted root development. The tooth remained asymptomatic even after 4 years. The regenerative endodontic procedure (REP) was successful in treating an immature permanent premolar with pulp necrosis and apical periodontitis with dens evaginatus. In this case, the tooth treated with an REP responded to orthodontic treatment similar to the nonendodontically treated teeth. Further studies are recommended to clarify the precise effects of orthodontic treatment on teeth treated with an REP. Copyright © 2018 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The Role of Hypoxia in Orthodontic Tooth Movement

Directory of Open Access Journals (Sweden)

A. Niklas

2013-01-01

Full Text Available Orthodontic forces are known to have various effects on the alveolar process, such as cell deformation, inflammation, and circulatory disturbances. Each of these conditions affecting cell differentiation, cell repair, and cell migration, is driven by numerous molecular and inflammatory mediators. As a result, bone remodeling is induced, facilitating orthodontic tooth movement. However, orthodontic forces not only have cellular effects but also induce vascular changes. Orthodontic forces are known to occlude periodontal ligament vessels on the pressure side of the dental root, decreasing the blood perfusion of the tissue. This condition is accompanied by hypoxia, which is known to either affect cell proliferation or induce apoptosis, depending on the oxygen gradient. Because upregulated tissue proliferation rates are often accompanied by angiogenesis, hypoxia may be assumed to fundamentally contribute to bone remodeling processes during orthodontic treatment.

Effect of CPP-ACP on the remineralization of acid-eroded human tooth enamel: nanomechanical properties and microtribological behaviour study

International Nuclear Information System (INIS)

Zheng, L; Zheng, J; Zhang, Y F; Qian, L M; Zhou, Z R

2013-01-01

Casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) has been used to enhance tooth remineralization in the dental clinic. But the contribution of CPP-ACP to the remineralization of acid-eroded human tooth enamel is of widespread controversy. To confirm the application potential of CPP-ACP in the remineralization repair of tooth erosion caused by acid-attack, the effect of remineralization in vitro in 2% w/v CPP-ACP solution on the acid-eroded human tooth enamel was investigated in this study. The repair of surface morphology and the improvement of nanomechanical and microtribological properties were characterized with laser confocal scanning microscope, scanning electron microscope, nanoindentation tester and nanoscratch tester. Results showed that a layer of uneven mineral deposits, which were mainly amorphous calcium phosphate (ACP) in all probability, was observed on the acid-eroded enamel surface after remineralization. Compared with the acid-eroded enamel surface, the nanoindentation hardness and Young's modulus of the remineralized enamel surface obviously increased. Both the friction coefficient and wear volume of the acid-eroded enamel surface decreased after remineralization. However, both the nanomechanical and the anti-wear properties of the remineralized enamel surface were still inferior to those of original enamel surface. In summary, tooth damage caused by acid erosion could be repaired by remineralization in CPP-ACP solution, but the repair effect, especially on the nanomechanical and anti-wear properties of the acid-eroded enamel, was limited. These results would contribute to a further exploration of the remineralization potential of CPP-ACP and a better understanding of the remineralization repair mechanism for acid-eroded human tooth enamel. (paper)

Effect of CPP-ACP on the remineralization of acid-eroded human tooth enamel: nanomechanical properties and microtribological behaviour study

Science.gov (United States)

Zheng, L.; Zheng, J.; Zhang, Y. F.; Qian, L. M.; Zhou, Z. R.

2013-10-01

Casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) has been used to enhance tooth remineralization in the dental clinic. But the contribution of CPP-ACP to the remineralization of acid-eroded human tooth enamel is of widespread controversy. To confirm the application potential of CPP-ACP in the remineralization repair of tooth erosion caused by acid-attack, the effect of remineralization in vitro in 2% w/v CPP-ACP solution on the acid-eroded human tooth enamel was investigated in this study. The repair of surface morphology and the improvement of nanomechanical and microtribological properties were characterized with laser confocal scanning microscope, scanning electron microscope, nanoindentation tester and nanoscratch tester. Results showed that a layer of uneven mineral deposits, which were mainly amorphous calcium phosphate (ACP) in all probability, was observed on the acid-eroded enamel surface after remineralization. Compared with the acid-eroded enamel surface, the nanoindentation hardness and Young's modulus of the remineralized enamel surface obviously increased. Both the friction coefficient and wear volume of the acid-eroded enamel surface decreased after remineralization. However, both the nanomechanical and the anti-wear properties of the remineralized enamel surface were still inferior to those of original enamel surface. In summary, tooth damage caused by acid erosion could be repaired by remineralization in CPP-ACP solution, but the repair effect, especially on the nanomechanical and anti-wear properties of the acid-eroded enamel, was limited. These results would contribute to a further exploration of the remineralization potential of CPP-ACP and a better understanding of the remineralization repair mechanism for acid-eroded human tooth enamel.

Histometric study of socket healing after tooth extraction in rats treated with diclofenac

Directory of Open Access Journals (Sweden)

Yugoshi Luciana Ibara

2002-01-01

Full Text Available The purpose of the present study was to investigate if diclofenac administration interferes with the time course of alveolar wound healing in rats. Forty-two Wistar rats were used, 21 rats received 10 mg/kg/day of diclofenac one day before and 4 days after extraction of the right maxillary incisors and 21 rats received saline. The animals were sacrificed 7, 14 and 21 days after tooth extraction. Progressive new bone formation and a decrease in the volume fraction of blood clot and connective tissue from 1 to 3 weeks after tooth extraction was quantified using the histometric point-counting method. Diclofenac treatment caused a significant delay in new bone formation in association with an impairment of blood clot remission/organization.

WHO water quality standards Vs Synergic effect(s) of fluoride, heavy metals and hardness in drinking water on kidney tissues

Science.gov (United States)

Wasana, Hewa M. S.; Perera, Gamage D. R. K.; Gunawardena, Panduka De S.; Fernando, Palika S.; Bandara, Jayasundera

2017-02-01

Despite WHO standards, waterborne diseases among the human being are rising alarmingly. It is known that the prolong exposure to contaminated water has major impact on public health. The effect of chemical contaminations in drinking water on human being is found to be chronic rather than acute and hence can be defined “consumption of contaminated drinking water could be a silent killer”. As the WHO recommended water quality standards are only for individual element and synergic effects of trace metals and anions have not been considered, investigation of synergic effects of trace metals and anions and their effect on human being is of prime important research. By an animal trial, we investigated the synergic effect(s) of heavy metals, aluminium, arsenic, fluoride and hardness in drinking water on kidney tissues of mice. Our investigation strongly suggests existing of a synergic effect especially among Cd, F and hardness of water which could lead to severe kidney damage in mice, even at WHO maximum recommended levels. Hence, the synergic effect(s) of trace metals, fluoride and hardness present in drinking water should be investigated meticulously when stipulating the water quality at WHO maximum recommended levels.

Hard and soft tissue changes following alveolar ridge preservation: a systematic review.

Science.gov (United States)

MacBeth, Neil; Trullenque-Eriksson, Anna; Donos, Nikolaos; Mardas, Nikos

2017-08-01

: -0.554 to 0.239) for socket grafting. A proximal vertical bone height reduction of -0.356 mm (95% CI: -0.490 to -0.222) was recorded for GBR, with a horizontal dimensional reduction of -1.45 mm (95% CI: -1.892 to -1.008) measured following GBR and -1.613 mm (95% CI: -1.989 to -1.238) for socket grafting procedures. Five papers reported on histological findings after ARP. Two papers indicated an increase in the width of the keratinised tissue following GBR, with two papers reporting a reduction in the thickness of the keratinised tissue following GBR. Histological examination revealed extensive variations in the treatment protocols and biomaterials materials used to evaluate extraction socket healing. GBR studies reported a variation in total bone formation of 47.9 ± 9.1% to 24.67 ± 15.92%. Post-operative complications were reported by 29 papers, with the most common findings soft tissue inflammation and infection. ARP results in a significant reduction in the vertical bone dimensional change following tooth extraction when compared to unassisted socket healing. The reduction in horizontal alveolar bone dimensional change was found to be variable. No evidence was identified to clearly indicate the superior impact of a type of ARP intervention (GBR, socket filler and socket seal) on bone dimensional preservation, bone formation, keratinised tissue dimensions and patient complications. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Bioceramic/Poly (glycolic-poly (lactic acid composite induces mineralized barrier after direct capping of rat tooth pulp tissue

Directory of Open Access Journals (Sweden)

Alfonso Gala-Garcia

2010-03-01

Full Text Available The aim of this study was to observe the histopathological pulp response following direct pulp capping of mechanically exposed teeth in rats with a composite of beta-tricalcium phosphate-hydroxyapatite bioceramic (BC and poly (glycolic-poly (lactic acid (PLGA material or a calcium hydroxide [Ca(OH2] material, compared to BC alone and a negative control of water. Pulp of the maxillary molars was exposed, followed by capping with the experimental material. The pulpal tissue response was assessed post-operatively at 1, 7, 14 and 30 d, followed by histological analysis. The Ca(OH2 group exhibited severe acute inflammatory cell infiltration at day 14. However after 30 d, a new hard tissue with macro porous obliteration of the pulp chamber and a characteristic necrotic area had appeared. BC and Ca(OH2 capping were associated with moderate inflammation and dentinal bridge similar. Meanwhile, in the BC/PLGA composite group, there was moderate inflammatory infiltrate and formation of a dense and complete dentinal bridge. In conclusion, the BC/PLGA composite material showed a large zone of tertiary dentin, and effectively reorganized the dentin-pulp complex.

Effect of different light curing units on Knoop hardness and temperature of resin composite.

Science.gov (United States)

Guiraldo, Ricardo Danil; Consani, Simonides; Xediek Consani, Rafael Leonardo; Mendes, Wilson Batista; Lympius, Thais; Coelho Sinhoreti, Mario Alexandre

2009-01-01

To evaluate the influence of quartz tungsten halogen and plasma arc curing (PAC) lights on Knoop hardness and change in polymerization temperature of resin composite. Filtek Z250 and Esthet X composites were used in the shade A3. The temperature increase was registered with Type-k thermocouple connected to a digital thermometer (Iopetherm 46). A self-cured polymerized acrylic resin base was built in order to guide the thermocouple and to support the dentin disk of 1.0 mm thickness obtained from bovine tooth. On the acrylic resin base, elastomer mold of 2.0 mm was adapted. The temperature increase was measured after composite light curing. After 24 h, the specimens were submitted to Knoop hardness test (HMV-2000, Shimadzu, Tokyo, Japan). Data were submitted to ANOVA and Tukey's test (alpha = 0.05). For both composites, there were no significant differences (P > 0.05) in the top surface hardness; however, PAC promoted statistically lower (P 0.05). The standardized radiant exposure showed no influence on the temperature increase of the composite, however, showed significant effect on hardness values.

Multiphoton microscopy imaging of developing tooth germs

Directory of Open Access Journals (Sweden)

Pei-Yu Pan

2014-01-01

Conclusion: In this study, a novel multiphoton microscopy database of images from developing tooth germs in mice was set up. We confirmed that multiphoton laser microscopy is a powerful tool for investigating the development of tooth germ and is worthy for further application in the study of tooth regeneration.

A Radiographic Study of Fused and Geminated Tooth

Energy Technology Data Exchange (ETDEWEB)

Park, Chul Jae; Lee, Sang Rae [Dept. of Oral Radiology, College of Dentistry, Kyunhee University, Seoul (Korea, Republic of)

1990-02-15

The incidence and several characteristic features of fused and geminated teeth were studied radiographically, with full mouth periapical radiogram and pantomogram, in 4201 patients of mixed dentition and 5358 patients of permanent dentition. The obtained results were as follows: 1. The prevalence was revealed to 2.86%, 0.32%, 0.33%, and 0.06% in deciduous fused tooth, permanent fused tooth, deciduous geminated tooth and permanent geminated tooth respectively, and these anomalies were occurred in female more than male. 2. Fused teeth were observed predominantly in lower anterior teeth area, especially in lateral incisor and canine region, and many cases of deciduous geminated tooth were observed in upper central incisor region. 3. Congenital missing rates of succedaneous tooth in deciduous fused teeth were 57.1%, 85.7%, 71.0%, 69.0% in upper right and left central-lateral incisor regions, lower right and left lateral incisor-canine regions, respectively. 4. Prevalence of dental caries was 42.3%, 18.8% and 5.6% in deciduous fused, deciduous geminated and permanent fused tooth, respectively. 5. In classifying of fused and geminated teeth into 9 type, by following appearance such as number of crown, root, pulp chamber and pulp canal of those teeth, it was more favorable that Type I (2 crown, 2 root, 2 pulp chamber, 2 pulp canal) in deciduous fused tooth and Type IX (1 crown, 1 root, 1 pulp chamber, 1 pulp canal) in permanent used tooth, deciduous and permanent geminated tooth.

A Radiographic Study of Fused and Geminated Tooth

International Nuclear Information System (INIS)

Park, Chul Jae; Lee, Sang Rae

1990-01-01

The incidence and several characteristic features of fused and geminated teeth were studied radiographically, with full mouth periapical radiogram and pantomogram, in 4201 patients of mixed dentition and 5358 patients of permanent dentition. The obtained results were as follows: 1. The prevalence was revealed to 2.86%, 0.32%, 0.33%, and 0.06% in deciduous fused tooth, permanent fused tooth, deciduous geminated tooth and permanent geminated tooth respectively, and these anomalies were occurred in female more than male. 2. Fused teeth were observed predominantly in lower anterior teeth area, especially in lateral incisor and canine region, and many cases of deciduous geminated tooth were observed in upper central incisor region. 3. Congenital missing rates of succedaneous tooth in deciduous fused teeth were 57.1%, 85.7%, 71.0%, 69.0% in upper right and left central-lateral incisor regions, lower right and left lateral incisor-canine regions, respectively. 4. Prevalence of dental caries was 42.3%, 18.8% and 5.6% in deciduous fused, deciduous geminated and permanent fused tooth, respectively. 5. In classifying of fused and geminated teeth into 9 type, by following appearance such as number of crown, root, pulp chamber and pulp canal of those teeth, it was more favorable that Type I (2 crown, 2 root, 2 pulp chamber, 2 pulp canal) in deciduous fused tooth and Type IX (1 crown, 1 root, 1 pulp chamber, 1 pulp canal) in permanent used tooth, deciduous and permanent geminated tooth.

A hard tissue cephalometric comparative study between hand tracing and computerized tracing

Directory of Open Access Journals (Sweden)

Ramachandra Prabhakar

2014-01-01

Full Text Available Aims: To analyze and compare the angular and linear hard tissue cephalometric measurements using hand-tracing and computerized tracings with Nemoceph and Dolphin software systems. Subjects and Methods: A total of 30 cephalograms were randomly chosen for study with the following criteria, cephalograms of patients with good contrast, no distortion, and minimal radiographic artifacts were considered using the digital method (Kodak 8000 C with 12 angular and nine linear parameters selected for the study. Comparisons were determined by post-hoc test using Tukey HSD method. The N-Par tests were performed using Kruskal-Walli′s method. Statistical Analysis Used: ANOVA and post-hoc. Results: The results of this study show that there is no significant difference in the angular and linear measurements recorded. The P values were significant at 0.05 levels for two parameters, Co-A and Co-Gn with the hand-tracing method. This was significant in ANOVA and post-hoc test by Tukey HSD method. Conclusions: This study of comparison provides support for transition from digital hand to computerized tracing methodology. In fact, digital computerized tracings were easier and less time consuming, with the same reliability irrespective of each method of tracing.

A 5-year prospective study of single-tooth replacements supported by the Astra Tech implant: a pilot study

DEFF Research Database (Denmark)

Gotfredsen, Klaus

2004-01-01

BACKGROUND: Implant-supported single-tooth replacements are an increasingly used method to replace teeth, especially in young patients. Therefore, long-term validation of different treatment modalities with different implant systems is of great importance. PURPOSE: The aim of the present study...... was to make a biologic, technical, and aesthetic evaluation of single-tooth replacement supported by the Astra Tech implant (Astra Tech AB, Mölndal, Sweden) during a 5-year period. MATERIALS AND METHODS: Twenty patients were divided into two consecutively treated groups. In group A the implants were placed...... "early" in the extraction sockets, and standard single-tooth abutments were used. In group B the implants were placed "delayed," and preparable abutments were used. Clinical examinations including registration of plaque, bleeding, crown lengths, soft tissue marginal level, papilla height, complications...

The adsorption of peptides and purified salivary proteins onto tooth enamel. A study on pellicle formation

NARCIS (Netherlands)

Juriaanse, Adriaan Cornelis

1980-01-01

The most common diseases that occur in the oral cavity are dental decay (caries) and inflammation of the soft tissues surrounding the teeth (periodontal disease). Both caries and periodontal disease are caused by bacterial metabolites in the plaque, an organic layer on the tooth surface, which

Photomechanical model of tooth enamel ablation by Er-laser radiation

Science.gov (United States)

Belikov, A. V.; Shatilova, K. V.; Skrypnik, A. V.; Vostryakov, R. G.; Maykapar, N. O.

2012-03-01

The photomechanical model of ablation of human tooth enamel is described in this work. It takes into account the structural peculiarities of enamel: free water in the enamel pores or cracks. We consider the photomechanical destruction of the enamel rods of hydroxyapatite by the pressure of water contained in the enamel pores and heated by laser radiation. This model takes into account attenuation by the Lambert-Beer law when radiation passes through the tissue and the fact that the tissue removal occurs when a unit volume of water was heated to the critical temperature. Decreasing logarithmic dependence of the enamel removal efficiency on the energy density was obtained as a result of the calculations. The shape of this function follows the shape of the experimental curve.

Evaluation of stiffness feedback for hard nodule identification on a phantom silicone model.

Science.gov (United States)

Li, Min; Konstantinova, Jelizaveta; Xu, Guanghua; He, Bo; Aminzadeh, Vahid; Xie, Jun; Wurdemann, Helge; Althoefer, Kaspar

2017-01-01

Haptic information in robotic surgery can significantly improve clinical outcomes and help detect hard soft-tissue inclusions that indicate potential abnormalities. Visual representation of tissue stiffness information is a cost-effective technique. Meanwhile, direct force feedback, although considerably more expensive than visual representation, is an intuitive method of conveying information regarding tissue stiffness to surgeons. In this study, real-time visual stiffness feedback by sliding indentation palpation is proposed, validated, and compared with force feedback involving human subjects. In an experimental tele-manipulation environment, a dynamically updated color map depicting the stiffness of probed soft tissue is presented via a graphical interface. The force feedback is provided, aided by a master haptic device. The haptic device uses data acquired from an F/T sensor attached to the end-effector of a tele-manipulated robot. Hard nodule detection performance is evaluated for 2 modes (force feedback and visual stiffness feedback) of stiffness feedback on an artificial organ containing buried stiff nodules. From this artificial organ, a virtual-environment tissue model is generated based on sliding indentation measurements. Employing this virtual-environment tissue model, we compare the performance of human participants in distinguishing differently sized hard nodules by force feedback and visual stiffness feedback. Results indicate that the proposed distributed visual representation of tissue stiffness can be used effectively for hard nodule identification. The representation can also be used as a sufficient substitute for force feedback in tissue palpation.

Evaluation of stiffness feedback for hard nodule identification on a phantom silicone model.

Directory of Open Access Journals (Sweden)

Min Li

Full Text Available Haptic information in robotic surgery can significantly improve clinical outcomes and help detect hard soft-tissue inclusions that indicate potential abnormalities. Visual representation of tissue stiffness information is a cost-effective technique. Meanwhile, direct force feedback, although considerably more expensive than visual representation, is an intuitive method of conveying information regarding tissue stiffness to surgeons. In this study, real-time visual stiffness feedback by sliding indentation palpation is proposed, validated, and compared with force feedback involving human subjects. In an experimental tele-manipulation environment, a dynamically updated color map depicting the stiffness of probed soft tissue is presented via a graphical interface. The force feedback is provided, aided by a master haptic device. The haptic device uses data acquired from an F/T sensor attached to the end-effector of a tele-manipulated robot. Hard nodule detection performance is evaluated for 2 modes (force feedback and visual stiffness feedback of stiffness feedback on an artificial organ containing buried stiff nodules. From this artificial organ, a virtual-environment tissue model is generated based on sliding indentation measurements. Employing this virtual-environment tissue model, we compare the performance of human participants in distinguishing differently sized hard nodules by force feedback and visual stiffness feedback. Results indicate that the proposed distributed visual representation of tissue stiffness can be used effectively for hard nodule identification. The representation can also be used as a sufficient substitute for force feedback in tissue palpation.

Clinical validity of panoramic radiographs with Digora PCT

International Nuclear Information System (INIS)

Matsuda, Yukiko; Araki, Kazuyuki; Hanazawa, Tomomi; Seki, Kenji; Okano, Tomohiro

2006-01-01

The quality of panoramic radiographs with a digital imaging system, Digora PCT, was compared with that of a Fuji Computed Radiography (FCR) system. The exposure settings that would produce the appropriate density for observation of the images were determined. The images of the Digora PCT and the FCR system were observed on a 17-inch CRT monitor and printed films respectively. Thirty images of patients were obtained with each system. Six oral radiologists observed the images and evaluated the visibility of pathologic conditions based on outline of mandible, mandibular canal and bone trabecula, shape of the tooth and periodontal hard tissue of the mandible, shape of the tooth and periodontal hard tissue of the maxilla, and outline of the bony structure of the maxillary sinus, using the following three categories: good, fair, and unacceptable. The images of each system were evaluated separately at an interval of 3 months. Mann-Whitney test with p=0.05 was used to analyze differences between the two systems. There were no images of either system rated as ''unacceptable''. The visibility of the shape of the tooth, periodontal hard tissue, and the outline of the bony structure of the maxillary sinus with the Digora PCT was inferior to that with the FCR system. However, it can be concluded that the image quality of the Digora PCT is adequate for dental purposes because there were no unacceptable images. (author)

Primary culprit for tooth loss!!

Directory of Open Access Journals (Sweden)

Sailavanya Nuvvula

2016-01-01

Full Text Available Aim: In order to facilitate planning for dental health services and to progress strategies to continue the reduction in tooth loss, it is important to identify the factors that result in such loss. therefore the aim of the study is to investigate the major cause for tooth extraction. Objective: to examine whether the major reason for tooth extraction is dental caries or periodontal disease. Materials and Methods: The study is carried out among the dental practitioners in our district. A questionnaire containing 10 items was distributed to the dental practitioners, which included age, gender, no of teeth indicated for extraction, the reason for extraction, and the periodontal parameters that are involved with the extracted tooth and were requested to complete the form on every extraction they were to undertake. the study form was collected at the end of the study period and data was subjected to statistical analysis. Results: A total of 502 patients were enrolled during the study period, and a total of 1055 teeth were extracted for several reasons. we found that 51.14%extractions are due to dental caries in case of 20-30years age groups, which is more when compared to tooth loss due to periodontal diseases in this age group. whereas in case of >40years of age group periodontal diseases account for 54.11%, and dental caries accounts for only 29.11%. Showing more teeth were lost due to periodontal disease. Conclusion: therefore we concluded that, caries is the dominant reason for extraction in patients with 20–30 years of age while periodontal disease accounts for the majority of tooth extraction in patients older than 40 years.

The remineralization potential of cocoa (Theobroma cacao bean extract to increase the enamel micro hardness

Directory of Open Access Journals (Sweden)

Sulistianingsih Sulistianingsih

2017-08-01

Full Text Available Introduction: Remineralization is the process of returning mineral ions into a hydroxyapatite structure characterized by mineral deposition on the enamel surface. The presence of mineral deposition would affect the micro hardness of tooth enamel. The use of fluorine as remineralization agent with side effects such as fluorosis. Cocoa bean extract contains theobromin that can be used as an alternative remineralization ingredients. The objectives was to determine micro hardness email after remineralization using cocoa bean extract as natural material and to compare with fluorine use as synthetic material. Methods: Thirty-six maxillary first premolar tooth crown was cut and planted in the epoxy resin. Teeth were then immersed in demineralization solution at pH 4 for 6 hours. The sample were divided into 2 groups, 18 for the fluorine group and the remaining group of cocoa extract. Vickers microhardness test was used before treatment, after demineralized and after remineralization. Results: Enamel microhardness value before treatment in the fluorine group average value was 376.17 VHN and the cocoa extract group was 357.33 VHN. After demineralization in fluorine group was 268,13 VHN and cocoa extract group was 235,93 VHN. After remineralization in fluorine group was 321,08 VHN and cocoa extract group was 293,86 VHN. The results of the analysis showed that the level of micro hardness email after remineralization was not significantly different in two groups (p > 0.05. Conclusions: Cocoa extract is able to increase the microhardness of enamel so it can act as a substitution for fluorine remineralization.

Effect of connective tissue grafting on peri-implant tissue in single immediate implant sites : A RCT

NARCIS (Netherlands)

Zuiderveld, Elise G; Meijer, Henny J A; den Hartog, Laurens; Vissink, Arjan; Raghoebar, Gerry M

AimTo assess the effect of connective tissue grafting on the mid-buccal mucosal level (MBML) of immediately placed and provisionalized single implants in the maxillofacial aesthetic zone. Materials and methodsSixty patients with a failing tooth were provided with an immediately placed and

Effects of loxoprofen on the apical root resorption during orthodontic tooth movement in rats.

Science.gov (United States)

Yamamoto, Taeko; Kaku, Masato; Sumi, Hiromi; Yashima, Yuka; Izumino, Jin; Tanimoto, Kotaro

2018-01-01

Studies have revealed that severe apical root resorption during tooth movement is caused by the noninfective inflammatory reaction of apical root tissues. We hypothesized that loxoprofen can suppress apical root resorption during tooth movement. Cyclic tensile force (CTF) of 10 kPa was applied to the human pulp cells for 48 hours by the Flexcell Strain Unit. Loxoprofen (10 and 100 μM) was added to the culture cells, and expression of cyclooxygenase (COX)-1, COX-2, interleukin (IL)-1β, receptor activator of nuclear factor kappa-B ligand (RANKL), tumor necrosis factor (TNF)-α, and macrophage colony-stimulating factor (M-CSF) were examined. To determine the effects of loxoprofen sodium on apical root reabsorption during tooth movement, the upper first molars of 7-week-old rats were subjected to mesial movement by 10g force for 30 days with or without the oral administration of loxoprofen. Gene expression and protein concentration of COX-1, COX-2, IL-1β, TNF-α, RANKL and M-CSF were significantly higher in the CTF group than in the control group. However, these levels were decreased by loxoprofen administration. After orthodontic tooth movement, the expression of IL-1β, TNF-α, RANKL and M-CSF decreased in the loxoprofen group than in the control group by immunohistochemical staining. In comparison to control group, less number of odontoclasts and a decrease in the amount of apical root resorption was observed in the loxoprofen group. Many osteoclasts became visible on the pressure side of the alveolar bone in the both groups, and the amount of tooth movement did not show a significant difference. These findings demonstrate that severe apical root resorption may be suppressed by loxoprofen administration, without a disturbance of tooth movement.

Intracellular co-delivery of Sr ion and phenamil drug through mesoporous bioglass nanocarriers synergizes BMP signaling and tissue mineralization.

Science.gov (United States)

Lee, Jung-Hwan; Mandakhbayar, Nandin; El-Fiqi, Ahmed; Kim, Hae-Won

2017-09-15

Inducing differentiation and maturation of resident multipotent stem cells (MSCs) is an important strategy to regenerate hard tissues in mal-calcification conditions. Here we explore a co-delivery approach of therapeutic molecules comprised of ion and drug through a mesoporous bioglass nanoparticle (MBN) for this purpose. Recently, MBN has offered unique potential as a nanocarrier for hard tissues, in terms of high mesoporosity, bone bioactivity (and possibly degradability), tunable delivery of biomolecules, and ionic modification. Herein Sr ion is structurally doped to MBN while drug Phenamil is externally loaded as a small molecule activator of BMP signaling, for the stimulation of osteo/odontogenesis and mineralization of human MSCs derived from dental pulp. The Sr-doped MBN (85Si:10Ca:5Sr) sol-gel processed presents a high mesoporosity with a pore size of ∼6nm. In particular, Sr ion is released slowly at a daily rate of ∼3ppm per mg nanoparticles for up to 7days, a level therapeutically effective for cellular stimulation. The Sr-MBN is internalized to most MSCs via an ATP dependent macropinocytosis within hours, increasing the intracellular levels of Sr, Ca and Si ions. Phenamil is loaded maximally ∼30% into Sr-MBN and then released slowly for up to 7days. The co-delivered molecules (Sr ion and Phenamil drug) have profound effects on the differentiation and maturation of cells, i.e., significantly enhancing expression of osteo/odontogenic genes, alkaline phosphatase activity, and mineralization of cells. Of note, the stimulation is a result of a synergism of Sr and Phenamil, through a Trb3-dependent BMP signaling pathway. This biological synergism is further evidenced in vivo in a mal-calcification condition involving an extracted tooth implantation in dorsal subcutaneous tissues of rats. Six weeks post operation evidences the osseous-dentinal hard tissue formation, which is significantly stimulated by the Sr/Phenamil delivery, based on histomorphometric

Tooth wear and wear investigations in dentistry.

Science.gov (United States)

Lee, A; He, L H; Lyons, K; Swain, M V

2012-03-01

Tooth wear has been recognised as a major problem in dentistry. Epidemiological studies have reported an increasing prevalence of tooth wear and general dental practitioners see a greater number of patients seeking treatment with worn dentition. Although the dental literature contains numerous publications related to management and rehabilitation of tooth wear of varying aetiologies, our understanding of the aetiology and pathogenesis of tooth wear is still limited. The wear behaviour of dental biomaterials has also been extensively researched to improve our understanding of the underlying mechanisms and for the development of restorative materials with good wear resistance. The complex nature of tooth wear indicates challenges for conducting in vitro and in vivo wear investigations and a clear correlation between in vitro and in vivo data has not been established. The objective was to critically review the peer reviewed English-language literature pertaining to prevalence and aetiology of tooth wear and wear investigations in dentistry identified through a Medline search engine combined with hand-searching of the relevant literature, covering the period between 1960 and 2011. © 2011 Blackwell Publishing Ltd.

Is tooth wear in the primary dentition predictive of tooth wear in the permanent dentition? Report from a longitudinal study.

LENUS (Irish Health Repository)

Harding, M A

2010-03-01

To determine the prevalence of tooth wear in the permanent dentition of a sample of 12-year-old school children and establish whether an association exists between tooth wear recorded now and tooth wear recorded in their primary dentition at age five.

Tooth Tissue Engineering: The Importance of Blood Products as a Supplement in Tissue Culture Medium for Human Pulp Dental Stem Cells.

Science.gov (United States)

Pisciolaro, Ricardo Luiz; Duailibi, Monica Talarico; Novo, Neil Ferreira; Juliano, Yara; Pallos, Debora; Yelick, Pamela Crotty; Vacanti, Joseph Phillip; Ferreira, Lydia Masako; Duailibi, Silvio Eduardo

2015-11-01

One of the goals in using cells for tissue engineering (TE) and cell therapy consists of optimizing the medium for cell culture. The present study compares three different blood product supplements for improved cell proliferation and protection against DNA damage in cultured human dental pulp stem cells for tooth TE applications. Human cells from dental pulp were first characterized as adult stem cells (ectomesenchymal mixed origin) by flow cytometry. Next, four different cell culture conditions were tested: I, supplement-free; II, supplemented with fetal bovine serum; III, allogeneic human serum; and IV, autologous human serum. Cultured cells were then characterized for cell proliferation, mineralized nodule formation, and colony-forming units (CFU) capability. After 28 days in culture, the comet assay was performed to assess possible damage in cellular DNA. Our results revealed that Protocol IV achieved higher cell proliferation than Protocol I (p = 0.0112). Protocols II and III resulted in higher cell proliferation than Protocol I, but no statistical differences were found relative to Protocol IV. The comet assay revealed less cell damage in cells cultured using Protocol IV as compared to Protocols II and III. The damage percentage observed on Protocol II was significantly higher than all other protocols. CFUs capability was highest using Protocol IV (p = 0.0018) and III, respectively, and the highest degree of mineralization was observed using Protocol IV as compared to Protocols II and III. Protocol IV resulted in significantly improved cell proliferation, and no cell damage was observed. These results demonstrate that human blood product supplements can be used as feasible supplements for culturing adult human dental stem cells.

Esthetic assessment of immediately restored implants combined with GBR and free connective tissue graft.

Science.gov (United States)

Kolerman, Roni; Nissan, Joseph; Mijiritsky, Eitan; Hamoudi, Nasreen; Mangano, Carlo; Tal, Haim

2016-11-01

Esthetic assessment of immediately restored implants combined with GBR and free connective tissue (CT) graft METHODS: A case-control, retrospective study involving 34 patients treated with maxillary anterior single implants, immediately placed and restored. Clinical and esthetic results were analyzed using standard clinical examination and a comprehensive index, comprising pink esthetic and white esthetic scores (PES/WES). The height of the implant crown and the corresponding height of the contralateral tooth crown were measured to identify mucosal recessions. The distance from the mucosal margin to the implant shoulder (DIM) was measured on the master model. Thirty of 34 implants fulfilled the strict success criteria set for dental implants with regard to osseointegration. Success was defined as implants with bone loss not exceeding 1.5 mm during the first year and loosing not more than 0.2 for each successive year. The other four implants were stable but did not meet the bone loss criteria mentioned above and defined as survived implants. Mean PES/WES was 14.44 ± 2.34 (range: 9-20). Mean PES was 7.12 ± 1.89 (range: 1-10). The highest mean values were achieved for the variable of root convexity/soft tissue color and texture (1.71 ± 0.46) whereas the mesial papilla (1.09 ± 0.62) proved to be the least pleasing. The mean WES was 7.32 ± 1.25 (range: 5-10). The difference between IC and contralateral TC was 0.54 mm. The mean value for the facial DIM was 3.82 ± 0.87 mm. An evaluation of soft and hard tissue augmentation in immediately restored immediate implant procedures was employed to obtain stable hard and soft tissues. The combined GBR and CT graft procedure achieved favorable peri-implant soft tissue condition and esthetic results. However, recession and incomplete papillas were frequently observed. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Interdisciplinary approach to enhance the esthetics of maxillary anterior region using soft- and hard-tissue ridge augmentation in conjunction with a fixed partial prosthesis.

Science.gov (United States)

Khetarpal, Shaleen; Chouksey, Ajay; Bele, Anand; Vishnoi, Rahul

2018-01-01

Favorable esthetics is one of the most important treatment outcomes in dentistry, and to achieve this, interdisciplinary approaches are often required. Ridge deficiencies can be corrected for both, soft- and hard-tissue discrepancies. To overcome such defects, not only a variety of prosthetic options are at our disposal but also several periodontal plastic surgical techniques are available as well. Various techniques have been described and revised, over the year to correct ridge defects. For enhancing soft-tissue contours in the anterior region, the subepithelial connective tissue graft is the treatment of choice. A combination of alloplastic bone graft in adjunct to connective tissue graft optimizes ridge augmentation and minimizes defects. The present case report describes the use of vascular interpositional connective tissue graft in combination with alloplastic bone graft for correction of Seibert's Class III ridge deficiency followed by a fixed partial prosthesis to achieve a better esthetic outcome.

Soft tissue grafting to improve implant esthetics

Directory of Open Access Journals (Sweden)

Moawia M Kassab

2010-09-01

Full Text Available Moawia M KassabDivision of Periodontics, Marquette University, School of Dentistry, Milwaukee, WI, USAAbstract: Dental implants are becoming the treatment of choice to replace missing teeth, especially if the adjacent teeth are free of restorations. When minimal bone width is present, implant placement becomes a challenge and often resulting in recession and dehiscence around the implant that leads to subsequent gingival recession. To correct such defect, the author turned to soft tissue autografting and allografting to correct a buccal dehiscence around tooth #24 after a malpositioned implant placed by a different surgeon. A 25-year-old woman presented with the chief complaint of gingival recession and exposure of implant threads around tooth #24. The patient received three soft tissue grafting procedures to augment the gingival tissue. The first surgery included a connective tissue graft to increase the width of the keratinized gingival tissue. The second surgery included the use of autografting (connective tissue graft to coronally position the soft tissue and achieve implant coverage. The third and final surgery included the use of allografting material Alloderm to increase and mask the implant from showing through the gingiva. Healing period was uneventful for the patient. After three surgical procedures, it appears that soft tissue grafting has increased the width and height of the gingiva surrounding the implant. The accomplished thickness of gingival tissue appeared to mask the showing of implant threads through the gingival tissue and allowed for achieving the desired esthetic that the patient desired. The aim of the study is to present a clinical case with soft tissue grafting procedures.Keywords: case report, connective tissue, dental implants, allograft, coronally positioned flap

Accelerated tooth eruption in children with diabetes mellitus.

Science.gov (United States)

Lal, Shantanu; Cheng, Bin; Kaplan, Selma; Softness, Barney; Greenberg, Ellen; Goland, Robin S; Lalla, Evanthia; Lamster, Ira B

2008-05-01

The objective of this study was to evaluate tooth eruption in 6- to 14-year-old children with diabetes mellitus. Tooth eruption status was assessed for 270 children with diabetes and 320 control children without diabetes. Data on important diabetes-related variables were collected. Analyses were performed using logistic regression models. Children with diabetes exhibited accelerated tooth eruption in the late mixed dentition period (10-14 years of age) compared to healthy children. For both case patients and control subjects the odds of a tooth being in an advanced eruptive stage were significantly higher among girls than boys. There was also a trend associating gingival inflammation with expedited tooth eruption in both groups. No association was found between the odds of a tooth being in an advanced stage of eruption and hemoglobin A(1c) or duration of diabetes. Patients with higher body mass index percentile demonstrated statistically higher odds for accelerated tooth eruption, but the association was not clinically significant. Children with diabetes exhibit accelerated tooth eruption. Future studies need to ascertain the role of such aberrations in dental development and complications such as malocclusion, impaired oral hygiene, and periodontal disease. The standards of care for children with diabetes should include screening and referral programs aimed at oral health promotion and disease prevention.

The effects of healing abutments of different size and anatomic shape placed immediately in extraction sockets on peri-implant hard and soft tissues. A pilot study in foxhound dogs.

Science.gov (United States)

López-López, Patricia J; Mareque-Bueno, Javier; Boquete-Castro, Ana; Aguilar-Salvatierra Raya, Antonio; Martínez-González, José M; Calvo-Guirado, José L

2016-01-01

The aim of this animal study was to compare the effects of narrow, concave-straight and wide anatomic healing abutments on changes to soft tissues and crestal bone levels around implants immediately placed into extraction sockets in foxhound dogs. Forty-eight titanium implants (Bredent Medical GMBH, Germany) of the same dimensions were placed in six foxhound dogs. They were divided into two groups (n = 24): test (implants with anatomic abutment) and control (implants with concave-straight abutment). The implants were inserted randomly in the post extraction sockets of P2 , P3 , P4, and M1 bilaterally in six dogs. After eight and twelve weeks, the animals were sacrificed and samples extracted containing the implants and the surrounding soft and hard tissues. Soft tissue and crestal bone loss (CBL) were evaluated by histology and histomorphometry. All implants were clinically and histologically osseointegrated. Healing patterns were examined microscopically at eight and twelve weeks. After eight and twelve weeks, for hard tissues, the distance from the implant shoulder to the first bone-to-implant contact (IS-C) was higher for control group in the lingual aspect with statistical significance (P < 0.05). For soft tissues (STL), the distance from the top of the peri-implant mucosa to the apical portion of the junction epithelium (PM-Je) was significantly less on the lingual aspect in the test group (with wider abutment) at eight and twelve weeks (P < 0.05). The distance from the top of the apical portion of the junction epithelium to the first bone-to-implant contact (Je-C) was significantly higher in the test group (wider abutment) in the lingual aspect at eight and twelve weeks (P < 0.05). There was no connective tissue contact with any abutment surface. Within the limitations of this animal study, anatomic healing abutments protect soft and hard tissues and reduce crestal bone resorption compared with concave-straight healing abutments. © 2014 John Wiley

A surface physicochemical rationale for calculus formation in the oral cavity

NARCIS (Netherlands)

Busscher, HJ; White, DJ; Kamminga-Rasker, HJ; van der Mei, HC

2004-01-01

Surface free energies of dental hard tissues, including salivary conditioning films on enamel, play a crucial role in mineralization, dissolution and adhesion processes at the tooth surface. These mineralization reactions at oral surfaces control the development and progression of various diseases.

Biologically Based Restorative Management of Tooth Wear

Directory of Open Access Journals (Sweden)

Martin G. D. Kelleher

2012-01-01

Full Text Available The prevalence and severity of tooth wear is increasing in industrialised nations. Yet, there is no high-level evidence to support or refute any therapeutic intervention. In the absence of such evidence, many currently prevailing management strategies for tooth wear may be failing in their duty of care to first and foremost improve the oral health of patients with this disease. This paper promotes biologically sound approaches to the management of tooth wear on the basis of current best evidence of the aetiology and clinical features of this disease. The relative risks and benefits of the varying approaches to managing tooth wear are discussed with reference to long-term follow-up studies. Using reference to ethical standards such as “The Daughter Test”, this paper presents case reports of patients with moderate-to-severe levels of tooth wear managed in line with these biologically sound principles.

Tooth Wear Is Frequent in Adult Patients with Celiac Disease

Directory of Open Access Journals (Sweden)

Massimo Amato

2017-12-01

Full Text Available (1 Background: Celiac disease (CD patients can be affected by mouth and tooth disorders, which are influenced by their gluten-free diet. The aim of our research was to evaluate the pathological conditions of the stomatognathic system observed in celiac patients on a gluten-free diet. (2 Methods: we consecutively recruited celiac patients on a gluten-free diet at our celiac center, as well as healthy volunteers. Two dentists examined all patients/controls and checked them for any mouth disorder. (3 Results: Forty-nine patients affected by celiac disease (age at test 31.8 ± 11.58, time on GFD 8.73 ± 7.7 and 51 healthy volunteers (age at test 30.5 ± 8.7 were included. Recurrent aphthous stomatitis was reported in 26 patients (53.0% and in 13 (25.5% controls (p = 0.005. Dental enamel disorders were reported in 7 patients (14.3% and in 0 controls (p = 0.002, with none having geographic tongue. We found non-specific tooth wear, characterized by loss of the mineralized tissue of the teeth, in 9 patients (18.3% and in 3 (5.9% controls (p = 0.05. (4 Conclusion: Recurrent aphthous stomatitis and enamel hypoplasia are “risk indicators” that may suggest that an individual has CD. We detected a high prevalence of non-specific tooth wear that can be caused by several factors such as malocclusion, sleep bruxism, parafunctional activity, and age.

Spatiotemporal expression of caveolin-1 and EMMPRIN during mouse tooth development.

Science.gov (United States)

Shi, Lu; Li, Lingyun; Wang, Ding; Li, Shu; Chen, Zhi; An, Zhengwen

2016-06-01

Caveolin-1 is a scaffolding protein involved in the formation of cholesterol-rich caveolae lipid rafts within the plasma membrane and is capable of collecting signaling molecules into the caveolae and regulating their activity, including extracellular matrix metalloproteinase inducer (EMMPRIN). However, detailed expression patterns of caveolin-1 and EMMPRIN in the developing dental germ are largely unknown. The present study investigated the expression patterns of caveolin-1 and EMMPRIN in the developing mouse tooth germ by immunohistochemistry and real-time polymerase chain reaction. At the bud stage, caveolin-1 expression was initiated in the epithelium bud and mesenchymal cells, while EMMPRIN was weakly expressed at this stage. At the cap stage, caveolin-1 protein was located in the lingual part of the tooth germ; however, EMMPRIN protein was located in the labial part. From the bell stage to 2 days postnatal, caveolin-1 expression was detected in the ameloblasts and cervical loop area; with EMMPRIN expression in the ameloblasts and odontoblasts. Real-time polymerase chain reaction results showed that both caveolin-1 and EMMPRIN mRNA levels increased gradually with progression of developmental stages, and peaked at day two postnatal. The current finding suggests that both caveolin-1 and EMMPRIN take part in mouse tooth development, especially in the differentiation and organization of odontogenic tissues.

Effect of different light curing units on Knoop hardness and temperature of resin composite

Directory of Open Access Journals (Sweden)

Guiraldo Ricardo

2009-01-01

Full Text Available Aim: To evaluate the influence of quartz tungsten halogen and plasma arc curing (PAC lights on Knoop hardness and change in polymerization temperature of resin composite. Materials and Methods: Filtek Z250 and Esthet X composites were used in the shade A3. The temperature increase was registered with Type-k thermocouple connected to a digital thermometer (Iopetherm 46. A self-cured polymerized acrylic resin base was built in order to guide the thermocouple and to support the dentin disk of 1.0 mm thickness obtained from bovine tooth. On the acrylic resin base, elastomer mold of 2.0 mm was adapted. The temperature increase was measured after composite light curing. After 24 h, the specimens were submitted to Knoop hardness test (HMV-2000, Shimadzu, Tokyo, Japan. Data were submitted to ANOVA and Tukey′s test (a = 0.05. Results: For both composites, there were no significant differences (P > 0.05 in the top surface hardness; however, PAC promoted statistically lower (P < 0.05 Knoop hardness number values in the bottom. The mean temperature increase showed no significant statistical differences (P > 0.05. Conclusion: The standardized radiant exposure showed no influence on the temperature increase of the composite, however, showed significant effect on hardness values.

Tooth loss prevalence among cardiac males and females

International Nuclear Information System (INIS)

Bokhari, S.A.H.; Khan, A.A.; Butt, A.K.

2007-01-01

Objective of study was to observe differences of tooth loss prevalence in males and females with Cardiac diseases Poor oral health, tooth loss and periodontal diseases have been reported to be associated with coronary heart diseases. Studies report gender differences in prevalence of cardiac diseases and tooth loss. This paper presents gender differences of tooth loss in cardiac patients of a cardiac hospital of Lahore, Pakistan. Methodology: Age matched Cardiac males and females attending OPD of the Punjab Institute of Cardiology (PIC), Lahore were included in the study. Personal and health-related information were questioned and noted. Oral examination was performed for recording of missing teeth. 1200 CHD study subjects with age-range of 30 to 80 years were enrolled for study. 1045 age matched, 766 (73.30%) males and 279 (26.70%) females were examined for tooth loss. 852 (81.53%) genders had at least one tooth missing. 599 (78.19) males and 253 (90.68%) females were observed with mean tooth loss of 7.5 (SD 8.720) and 11.15 (SD 10.375)respectively statistical association among them was also significant (P= 0.000) with OR of 2.339. More subjects (76.29%) showed a loss of 1-15 teeth that I was also significant among males and females. Tooth loss was significant in age groups of 41-50 years (P=0.001) and 51-60 years (P=0.000) Gender differences of tooth loss prevalence among CHD Subjects were significant with more risk for males as compared to females. (author)

Functional constraints on tooth morphology in carnivorous mammals

Directory of Open Access Journals (Sweden)

Smits Peter D

2012-08-01

Full Text Available Abstract Background The range of potential morphologies resulting from evolution is limited by complex interacting processes, ranging from development to function. Quantifying these interactions is important for understanding adaptation and convergent evolution. Using three-dimensional reconstructions of carnivoran and dasyuromorph tooth rows, we compared statistical models of the relationship between tooth row shape and the opposing tooth row, a static feature, as well as measures of mandibular motion during chewing (occlusion, which are kinetic features. This is a new approach to quantifying functional integration because we use measures of movement and displacement, such as the amount the mandible translates laterally during occlusion, as opposed to conventional morphological measures, such as mandible length and geometric landmarks. By sampling two distantly related groups of ecologically similar mammals, we study carnivorous mammals in general rather than a specific group of mammals. Results Statistical model comparisons demonstrate that the best performing models always include some measure of mandibular motion, indicating that functional and statistical models of tooth shape as purely a function of the opposing tooth row are too simple and that increased model complexity provides a better understanding of tooth form. The predictors of the best performing models always included the opposing tooth row shape and a relative linear measure of mandibular motion. Conclusions Our results provide quantitative support of long-standing hypotheses of tooth row shape as being influenced by mandibular motion in addition to the opposing tooth row. Additionally, this study illustrates the utility and necessity of including kinetic features in analyses of morphological integration.

Effects of surface hydrophilicity and microtopography on early stages of soft and hard tissue integration at non-submerged titanium implants: an immunohistochemical study in dogs.

Science.gov (United States)

Schwarz, Frank; Ferrari, Daniel; Herten, Monika; Mihatovic, Ilja; Wieland, Marco; Sager, Martin; Becker, Jürgen

2007-11-01

The aim of the present study was to investigate the effects of surface hydrophilicity and microtopography on soft and hard tissue integration at non-submerged titanium implants. Implantation of conventional sand-blasted large grit and acid-etched (SLA) and chemically modified SLA (modSLA) titanium implants with differently structured transmucosal surfaces (SLA implants: machined [M-SLA] or SLA [SLA-SLA]; modSLA implants: mod acid-etched [modA] [modA-modSLA] or modSLA [modSLA-modSLA]) was performed bilaterally in the upper and lower jaws of 15 beagle dogs. The animals were sacrificed after 1, 4, 7, 14, or 28 days. Tissue reactions were assessed histomorphometrically and immunohistochemically using monoclonal antibodies to transglutaminase II (angiogenesis) and osteocalcin. Although the junctional epithelium commonly was separated from M-SLA and SLA-SLA implants by a gap, the epithelial cells appeared to be in close contact with modA-modSLA surfaces after 14 days of healing. Moreover, modA-modSLA and modSLA-modSLA groups showed a well-vascularized subepithelial connective tissue exhibiting collagen fibers that started to extend and attach partially perpendicular to the implant surface. The highest and statistically significant mean bone-to-implant contact areas were observed in the modA-modSLA and modSLA-modSLA groups at days 7, 14, and 28. Within the limits of this study, it may be concluded that soft and hard tissue integration was influenced mainly by surface hydrophilicity rather than by microtopography.

Effects of caffeic acid phenethyl ester on palatal mucosal defects and tooth extraction sockets

Directory of Open Access Journals (Sweden)

Günay A

2014-10-01

Full Text Available Ahmet Günay,1 Osman Fatih Arpağ,2 Serhat Atilgan,3 Ferhan Yaman,3 Yusuf Atalay,4 İzzet Acikan3 1Department of Periodontology, Faculty of Dentistry, Dicle University, Diyarbakir, Turkey; 2Department of Periodontology, Faculty of Dentistry, Mustafa Kemal University, Hatay, Turkey; 3Department of Maxillofacial Surgery, Faculty of Dentistry, Dicle University, Diyarbakir, Turkey; 4Department of Maxillofacial Surgery, Faculty of Dentistry, Kocatepe University, Afyon, Turkey Aim: The purpose of this study was to evaluate the effects of caffeic acid phenethyl ester (CAPE on palatal mucosal defects and tooth extraction sockets in an experimental model.Materials and methods: Forty-two male Sprague-Dawley rats with a mean age of 7 weeks and weighing 280–490 g were used in this study. The rats were randomly divided into two groups: group A (the control group, n=21 and group B (the experimental group, n=21. Under anesthesia with ketamine (8 mg/100 g, intraperitoneally, palatal mucosal defects were created and tooth extraction was performed in the rats in groups A and B. Group A received no treatment, whereas group B received CAPE. CAPE was injected daily (10 µmol/kg, intraperitoneally. The rats were killed on days 7, 14, and 30 after the procedures. Palatal mucosa healing and changes in bone tissue and fibrous tissue were evaluated histopathologically.Result: Pairwise comparisons showed no statistically significant difference between days 7 and 14 in either group (P>0.05. At day 30, bone healing was significantly better in group B (CAPE than in group A (control (P<0.05. Fibrinogen levels at day 30 were significantly higher in group A (control than in group B (CAPE (P<0.05. Pairwise comparisons showed no statistically significant difference in palatal mucosa healing levels between days 7 and 14 in both groups (P>0.05.Conclusion: In conclusion, the findings of this study suggest that CAPE can significantly improve tooth socket healing. Keywords: caffeic

Longterm survival and reason for failure of anterior composite restoration

Directory of Open Access Journals (Sweden)

Nina Djustiana

2016-06-01

Full Text Available Composites resin restorations have been used for repairing and restoring anterior teeth for decades due to the growing needs for a cost- effective aesthetic restoration and the advancement in dental material and polymer technology. Failure of composite restorations cannot be neglected, due to multiple factors, i.e. failure to diagnose the gingival tissue, inadequate tissue management, quality of remaining tooth structure, and inadequate preparation. The aim of this review is to improve clinical performances of direct composite as permanent restorations. Long lasting aesthetic composite restorations required proper mouth preparations ,which  includes supporting and dental hard tissue preparations, tooth preparation, proper isolation, bonding procedures, light cure unit, and the resin composite itself.

Experimental study of the effect of Nd:YAG laser on dental hard tissues: comparison between multi-pulse and free-generation emission code

International Nuclear Information System (INIS)

Carballosa Amor, A.; Tellez Jimenez, H.; Ponce Flores, E.; Flores Reyes, T.

2016-01-01

The aim of this study is to compare and contrast the morphological changes on dental hard tissue when irradiated with a Nd: YAG laser both on multi-pulse mode, with a Q: Switch of Cr: YAG passive, and on free generation mode. The experimental sample consisted of 6 healthy third molars which were divided equally and randomly between the two emission methods. The depths of each perforation were measured by optical coherence tomography (OCT). It was noted that, despite being less energy in the multi-pulse mode, the first three shots in this achieved deeper cavities than the ones on the free generation mode. Also, less damage to surrounding tissue were obtained on multi-pulse mode. (Author)

Use of ultrasound Doppler to determine tooth vitality in a discolored tooth after traumatic injury: its prospects and limitations

Directory of Open Access Journals (Sweden)

Yong-Wook Cho

2014-02-01

Full Text Available When a tooth shows discoloration and does not respond to the cold test or electric pulp test (EPT after a traumatic injury, its diagnosis can be even more difficult due to the lack of proper diagnostic methods to evaluate its vitality. In these case reports, we hope to demonstrate that ultrasound Doppler might be successfully used to evaluate the vitality of the tooth after trauma, and help reduce unnecessary endodontic treatments. In all three of the present cases, the teeth were discolored after traumatic injuries and showed negative responses to the cold test and EPT. However, they showed distinctive vital reactions in the ultrasound Doppler test during the whole observation period. In the first case, the tooth color returned to normal, and the tooth showed a positive response to the cold test and EPT at 10 wk after the injury. In the second case, the tooth color had returned to its normal shade at 10 wk after the traumatic injury but remained insensitive to the cold test and EPT. In the third case, the discoloration was successfully treated with vital tooth bleaching.

Tooth Retained Implant: No More an Oxymoron

Directory of Open Access Journals (Sweden)

Divya Bhat

2011-03-01

Full Text Available Introduction: Periodontally af-fected teeth are treated in one of the two ways. (1 Tooth retention after periodontal surgery, in which the degree of regeneration achieved is unpredictable. (2 Tooth extrac-tion and implant placement. Implants have an osseointegrated surface which does not provide adequate shock absorption. Regeneration can be achieved by resecting the crown of the affected tooth and submerging the root. This technique has not had a clinical application so far as the tooth becomes difficult to restore. Placing an implant within the root can make the retained root restorable. At the same time, as the implant is placed within the root surface it achieves a periodontal integration which dampens occlusal forces better than osseointegration. Therefore, such a “tooth retained implant” may serve as an additional treatment option with significant benefits over tooth retention and implant placement alone. The hypothesis: Implants placed within retained roots have shown cementum deposition and attachment of periodontal ligament fibers over their surface. This periodontal attachment may be able to dam-pen forces better than in an osseointegrated implant. Moreover, since an implant is being placed, the crown of the tooth can be resected and submerged. This prevents epithelial migration, allows for the periodontal ligament cells to populate the wound and favors regeneration.Evaluation of the hypothesis: The technique of placing implants within cavities prepared in the root and then submerging them are simple for any practitioner placing implants routinely.

Studying Hardness Meter Spring Strength to Understand Hardness Distribution on Body Surfaces.

Science.gov (United States)

Arima, Yoshitaka

2017-10-01

For developing a hardness multipoint measurement system for understanding hardness distribution on biological body surfaces, we investigated the spring strength of the contact portion main axis of a biological tissue hardness meter (product name: PEK). We measured the hardness of three-layered sheets of six types of gel sheets (90 mm × 60 mm × 6 mm) constituting the acupuncture practice pads, with PEK measurements of 1.96 N, 2.94 N, 3.92 N, 4.90 N, 5.88 N, 6.86 N, 7.84 N, 8.82 N, and 9.81 N of the main axis spring strength. We obtained measurements 10 times for the gel sheets and simultaneously measured the load using a digital scale. We measured the hardness distribution of induration embedded and breast cancer palpation models, with a main axis with 1.96 N, 4.90 N, and 9.81 N spring strengths, to create a two-dimensional Contour Fill Chart. Using 4.90 N spring strength, we could obtain measurement loads of ≤3.0 N, and the mean hardness was 5.14 mm. This was close to the median of the total measurement range 0.0-10.0 mm, making the measurement range the largest for this spring strength. We could image the induration of the induration-embedded model regardless of the spring strength. Overall, 4.90 N spring strength was best suited for imaging cancer in the breast cancer palpation model. Copyright © 2017. Published by Elsevier B.V.

Interdisciplinary approach to enhance the esthetics of maxillary anterior region using soft- and hard-tissue ridge augmentation in conjunction with a fixed partial prosthesis

Directory of Open Access Journals (Sweden)

Shaleen Khetarpal

2018-01-01

Full Text Available Favorable esthetics is one of the most important treatment outcomes in dentistry, and to achieve this, interdisciplinary approaches are often required. Ridge deficiencies can be corrected for both, soft- and hard-tissue discrepancies. To overcome such defects, not only a variety of prosthetic options are at our disposal but also several periodontal plastic surgical techniques are available as well. Various techniques have been described and revised, over the year to correct ridge defects. For enhancing soft-tissue contours in the anterior region, the subepithelial connective tissue graft is the treatment of choice. A combination of alloplastic bone graft in adjunct to connective tissue graft optimizes ridge augmentation and minimizes defects. The present case report describes the use of vascular interpositional connective tissue graft in combination with alloplastic bone graft for correction of Seibert's Class III ridge deficiency followed by a fixed partial prosthesis to achieve a better esthetic outcome.

Impact of Ellagic Acid in Bone Formation after Tooth Extraction: An Experimental Study on Diabetic Rats

Directory of Open Access Journals (Sweden)

Mazen M. Jamil Al-Obaidi

2014-01-01

Full Text Available Objectives. To estimate the impact of ellagic acid (EA towards healing tooth socket in diabetic animals, after tooth extraction. Methods. Twenty-four Sprague Dawley male rats weighing 250–300 g were selected for this study. All animals were intraperitoneally injected with 45 mg/kg (b.w. of freshly prepared streptozotocin (STZ, to induce diabetic mellitus. Then, the animals were anesthetized, and the upper left central incisor was extracted and the whole extracted sockets were filled with Rosuvastatin (RSV. The rats were separated into three groups, comprising 8 rats each. The first group was considered as normal control group and orally treated with normal saline. The second group was regarded as diabetic control group and orally treated with normal saline, whereas the third group comprised diabetic rats, administrated with EA (50 mg/kg orally. The maxilla tissue stained by eosin and hematoxylin (H&E was used for histological examinations and immunohistochemical technique. Fibroblast growth factor (FGF-2 and alkaline phosphatase (ALP were used to evaluate the healing process in the extracted tooth socket by immunohistochemistry test. Results. The reactions of immunohistochemistry for FGF-2 and ALP presented stronger expression, predominantly in EA treated diabetic rat, than the untreated diabetic rat. Conclusion. These findings suggest that the administration of EA combined with RSV may have accelerated the healing process of the tooth socket of diabetic rats, after tooth extraction.

Autogenous Transplantation for Replacing a Hopeless Tooth.

Science.gov (United States)

Zakershahrak, Mehrsa; Moshari, Amirabbas; Vatanpour, Mehdi; Khalilak, Zohreh; Jalali Ara, Afsoon

2017-01-01

Autogenous tooth transplantation (ATT) is a simple and reasonable choice for replacing the missing teeth when a proper donor tooth is available. This report presents a case of successful ATT of a maxillary right third molar for replacement of mandibular right second molar with a concomitant endodontic-periodontal disease. The mandibular second molar was believed to be hopeless due to a severe damage to coronal tooth structure, inappropriate root canal treatment and apical radiolucency. After extraction of mandibular second molar and maxillary third molar (the donor), the tooth was re-implanted into the extracted socket of second molar site. Root canal therapy was then performed. After 3 years, clinical and radiographic examinations revealed satisfying results, with no signs and symptoms. The patient is asymptomatic and the transplanted tooth is still functional with no signs of marginal periodontal pathosis. Radiographies showed bone regeneration in the site of previous extensive periapical lesion, normal periodontal ligament with no signs of root resorption.

Treatment of abraded teeth using metal free ceramics and conventional metal-ceramic restorations

Directory of Open Access Journals (Sweden)

Bošković Mirjana V.

2012-01-01

Full Text Available Introduction. Contemporary reconstructive dentistry is considered to be a bioesthetic discipline, the study of the beauty of living creatures in their original form and functions. A discussion of esthetic dentistry, the sophisticated artificial restorations in the patient mouth, hardly discernible to an observer or expert eye, implies a whole series of qualities. Damage of hard tooth-tissue, which is not caused by caries, is a physiological process present throughout the whole life, but some factors can bring about great losses of the hard tissue. This damage can be caused by a combination of different etiological factors, such as genetical and functional ones. Case report. A patient is coming in dental surgery complaining of a large damage of the hard-tooth tissue, ugly appearance of his teeth, speech dysfunction and masticatory problems. An intraoral view shows the presence of a large teeth-abrasion. The treatment plan simplified the treatment with a combination of metal-ceramic restorations and a new ceramic system IPS e.max (Ivoclar Vivadentm Schaan, Liechtenstien. Conclusion. In this clinical case with presented abrasion the treatment was presented using all-ceramic restorations and classical metal-ceramic restorations to establish good health, function and estehetic. The use of restorations based on zirconium (IPS e.max ZirPress, Ivoclar Vivadent, Schaan, Liechtenstein can produce excellent clinical results in the frontal, as well as in lateral segments.

Pre prosthetic reconstruction of alveolar ridge

Directory of Open Access Journals (Sweden)

Prabhuji Munivenkatappa Lakshmaiahenkatesh

2011-01-01

Full Text Available Dento-alveolar bony defects are common and occur due to a variety of causes, such as, pulpal pathology, traumatic tooth extraction, advanced periodontal disease, implant failure, tumor or congenital anomalies. These defects often cause a significant problem in dental treatment and rehabilitation. Many techniques exist for effective soft and hard tissue augmentation. The approach is largely based on the extent of the defect and specific procedures to be performed for the implant or prosthetic rehabilitation. This article presents case reports of soft and hard tissue ridge augmentation.

21 CFR 872.3580 - Preformed gold denture tooth.

Science.gov (United States)

2010-04-01

... tooth in a fixed or removable partial denture. (b) Classification. Class I (general controls). The... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a...

Digital dissection - using contrast-enhanced computed tomography scanning to elucidate hard- and soft-tissue anatomy in the Common Buzzard Buteo buteo.

Science.gov (United States)

Lautenschlager, Stephan; Bright, Jen A; Rayfield, Emily J

2014-04-01

Gross dissection has a long history as a tool for the study of human or animal soft- and hard-tissue anatomy. However, apart from being a time-consuming and invasive method, dissection is often unsuitable for very small specimens and often cannot capture spatial relationships of the individual soft-tissue structures. The handful of comprehensive studies on avian anatomy using traditional dissection techniques focus nearly exclusively on domestic birds, whereas raptorial birds, and in particular their cranial soft tissues, are essentially absent from the literature. Here, we digitally dissect, identify, and document the soft-tissue anatomy of the Common Buzzard (Buteo buteo) in detail, using the new approach of contrast-enhanced computed tomography using Lugol's iodine. The architecture of different muscle systems (adductor, depressor, ocular, hyoid, neck musculature), neurovascular, and other soft-tissue structures is three-dimensionally visualised and described in unprecedented detail. The three-dimensional model is further presented as an interactive PDF to facilitate the dissemination and accessibility of anatomical data. Due to the digital nature of the data derived from the computed tomography scanning and segmentation processes, these methods hold the potential for further computational analyses beyond descriptive and illustrative proposes. © 2013 The Authors. Journal of Anatomy published by John Wiley & Sons Ltd on behalf of Anatomical Society.

Potential feasibility of dental stem cells for regenerative therapies: stem cell transplantation and whole-tooth engineering.

Science.gov (United States)

Nakahara, Taka

2011-07-01

Multipotent mesenchymal stem cells from bone marrow are expected to be a somatic stem cell source for the development of new cell-based therapy in regenerative medicine. However, dental clinicians are unlikely to carry out autologous cell/tissue collection from patients (i.e., marrow aspiration) as a routine procedure in their clinics; hence, the utilization of bone marrow stem cells seems impractical in the dental field. Dental tissues harvested from extracted human teeth are well known to contain highly proliferative and multipotent stem cell compartments and are considered to be an alternative autologous cell source in cell-based medicine. This article provides a short overview of the ongoing studies for the potential application of dental stem cells and suggests the utilization of 2 concepts in future regenerative medicine: (1) dental stem cell-based therapy for hepatic and other systemic diseases and (2) tooth replacement therapy using the bioengineered human whole tooth, called the "test-tube dental implant." Regenerative therapies will bring new insights and benefits to the fields of clinical medicine and dentistry.

21 CFR 872.5525 - Preformed tooth positioner.

Science.gov (United States)

2010-04-01

...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected bite...

A methodological approach to assessing alveolar ridge preservation procedures in humans: soft tissue profile.

Science.gov (United States)

Vanhoutte, Vanessa; Rompen, Eric; Lecloux, Geoffrey; Rues, Stefan; Schmitter, Marc; Lambert, France

2014-03-01

The aesthetic results of implant restoration in the anterior maxilla are particularly related to the soft tissue profile. Although socket preservation techniques appear to reduce bone remodelling after tooth extraction, there is still few investigations assessing the external soft tissue profile after such procedures. The goal of this study was to describe an accurate technique to evaluate soft tissue contour changes after performing socket preservation procedures. The secondary objective was to apply the newly developed measuring method to a specific socket preservation using a "saddled" connective tissue graft combined with the insertion of slowly resorbable biomaterials into the socket. A total of 14 patients needing tooth replacement in the aesthetic region were included to receive a socket preservation procedure using a connective tissue graft. Impressions were taken before the tooth extraction (baseline) and at 2, 4, and 12 weeks after the procedure. The corresponding plaster casts were scanned, and the evolution of the soft tissue profile in relation to the baseline situation was assessed using imaging software. The measuring technique allowed assessing the soft tissue profiles accurately at different levels of the alveolar process. The insertion of a saddled connective tissue appeared to compensate for the horizontal and vertical bone remodelling after a socket preservation procedure in most regions of the alveolar crest. After 12 weeks, the only significant change was located in the more cervical and central region of the alveolar process and reached a median drop of 0.62 mm from baseline. Within the limitations of this study, we found that a saddled connective tissue graft combined with a socket preservation procedure could almost completely counteract the bone remodelling in terms of the external soft tissue profile. The minor changes found in the cervical region might disappear with the emergence profile of the prosthodontic components. The described

Work Hard / Play Hard

OpenAIRE

Burrows, J.; Johnson, V.; Henckel, D.

2016-01-01

Work Hard / Play Hard was a participatory performance/workshop or CPD experience hosted by interdisciplinary arts atelier WeAreCodeX, in association with AntiUniversity.org. As a socially/economically engaged arts practice, Work Hard / Play Hard challenged employees/players to get playful, or go to work. 'The game changes you, you never change the game'. Employee PLAYER A 'The faster the better.' Employer PLAYER B

Parameters affecting tooth loss during periodontal maintenance in a Greek population.

Science.gov (United States)

Tsami, Alexandra; Pepelassi, Eudoxie; Kodovazenitis, George; Komboli, Mado

2009-09-01

Investigators have evaluated predictive parameters of tooth loss during the maintenance phase (MP). The authors conducted a retrospective study to evaluate the rate of tooth loss and to explore the parameters that affect tooth loss during MP in a Greek population. A periodontist administered periodontal treatment and maintenance care to 280 participants with severe periodontitis for a mean period +/- standard deviation of 10.84 +/- 2.13 years. The periodontist recorded the following parameters for each participant: oral hygiene index level, simplified gingival index level, clinical attachment level, probing depth measurements, initial tooth prognosis, smoking status, tooth loss during active periodontal treatment and MP, and compliance with suggested maintenance visits. The authors found that total tooth loss during active treatment (n = 1,427) was greater than during MP (n = 918) and was associated with the initial tooth prognosis, tooth type group, participants' compliance with suggested maintenance visits, smoking status and acceptability of the quality of tooth restorations. Most of the teeth extracted during maintenance had an initial guarded prognosis (n = 612). Participants whose compliance was erratic had a greater risk of undergoing tooth extraction than did participants whose compliance was complete. Participants' initial tooth prognosis, tooth type, compliance with suggested maintenance visits and smoking status affected tooth loss during MP. Initial guarded prognosis and erratic compliance increased the risk of undergoing tooth extraction during maintenance. Determining predictive parameters for disease progression and tooth loss provides critical information to clinicians so that they can develop and implement rational treatment planning.

Tooth agenesis in osteogenesis imperfecta related to mutations in the collagen type I genes.

Science.gov (United States)

Malmgren, B; Andersson, K; Lindahl, K; Kindmark, A; Grigelioniene, G; Zachariadis, V; Dahllöf, G; Åström, E

2017-01-01

Osteogenesis imperfecta (OI) is a heterogeneous group of disorders of connective tissue, mainly caused by mutations in the collagen type I genes (COL1A1 and COL1A2). Tooth agenesis is a common feature of OI. We investigated the association between tooth agenesis and collagen type I mutations in individuals with OI. In this cohort study, 128 unrelated individuals with OI were included. Panoramic radiographs were analyzed regarding dentinogenesis imperfecta (DGI) and congenitally missing teeth. The collagen I genes were sequenced in all individuals, and in 25, multiplex ligation-dependent probe amplification was performed. Mutations in the COL1A1 and COL1A2 genes were found in 104 of 128 individuals. Tooth agenesis was diagnosed in 17% (hypodontia 11%, oligodontia 6%) and was more frequent in those with DGI (P = 0.016), and in those with OI type III, 47%, compared to those with OI types I, 12% (P = 0.003), and IV, 13% (P = 0.017). Seventy-five percent of the individuals with oligodontia (≥6 missing teeth) had qualitative mutations, but there was no association with OI type, gender, or presence of DGI. The prevalence of tooth agenesis is high (17%) in individuals with OI, and OI caused by a qualitative collagen I mutation is associated with oligodontia. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Soft tissue augmentation techniques and materials used in the oral cavity : an overview

NARCIS (Netherlands)

Wolff, J.; Farré-Guasch, E.; Sándor, G.K.; Gibbs, S.; Jager, D.J.; Forouzanfar, T.

2016-01-01

Purpose: Oral soft tissue augmentation or grafting procedures are often necessary to achieve proper wound closure after deficits resulting from tumor excision, clefts, trauma, dental implants, and tooth recessions. Materials and Methods: Autologous soft tissue grafts still remain the gold standard

Pleomorphic adenoma of minor salivary gland: hard palate

International Nuclear Information System (INIS)

Garcia Canas, Wilmer; Benitez Narvaez, N.

2006-01-01

The pleomorphic adenoma or mixed tumor occurs in 4 to 14% of the accessory glands salivary. Different localizations exist: AEC, nasal block, lips, maxillary sinus, nasopharynx or in any other localization where salivate tissue exists, but the palate constitutes the most frequent localization, because it gathers more than 50% of minor salivary glands. In the palate, it can be developed a wide variety of tumors coming from the connective and epithelial tissue, 44% arise in the minor salivary glands. In 49 to 65% of them are benign tumors, principally pleomorphic adenomas, located preferably in the hard palate, nearby or in the union with the soft palate as in our case. We present a 42 year old patient with at pleomorphic adenoma of hard palate. (The author)

Variables affecting orthodontic tooth movement with clear aligners.

Science.gov (United States)

Chisari, Justin R; McGorray, Susan P; Nair, Madhu; Wheeler, Timothy T

2014-04-01

In this study, we examined the impacts of age, sex, root length, bone levels, and bone quality on orthodontic tooth movement. Clear aligners were programmed to move 1 central incisor 1 mm over the course of 8 weeks. Thirty subjects, ages 19 to 64, were enrolled, and measurements were made on digital models (percentage of tooth movement goal achieved). Morphometric features and bone quality were assessed with cone-beam computed tomography. Data from this study were combined with data from 2 similar studies to increase the power for some analyses. The mean percentage of tooth movement goal achieved was 57% overall. Linear regression modeling indicated a cubic relationship between age and tooth movement, with a decreasing rate of movement from ages 18 to 35 years, a slightly increasing rate from ages 35 to 50, and a decreasing rate from ages 50 to 70. The final decreasing trend was not apparent for women. As would be expected, the correlation was significant between the percentage of the goal achieved and the cone-beam computed tomography superimposed linear measures of tooth movement. A significant negative correlation was found between tooth movement and the measurement apex to the center of rotation, but bone quality, as measured by fractal dimension, was not correlated with movement. The relationship between age and tooth movement is complex and might differ for male and female patients. Limited correlations with cone-beam computed tomography morphology and rate of tooth movement were detected. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Tooth resorption in cats: contribution of vitamin D and inflammation

NARCIS (Netherlands)

Vrieling, H.E.

2010-01-01

Tooth resorption in cats Tooth resorption affecting several teeth is a painful disease with a prevalence of up to 75% in household cats and is often accompanied by periodontitis. Tooth resorption is caused by an increased number and activity of tooth-resorbing odontoclasts, cells that share

Tooth fractures in canine clinical practice

International Nuclear Information System (INIS)

Capik, I.; Ledecky, V.; Sevcik, A.

2001-01-01

Tooth fractures constitute a considerable fraction of all tooth diseases. Out of the 5,370 dogs treated during four years, 492 were presented with dental problems and 28.3 % of the latter were treated for tooth fractures. Canines were the most frequently affected teeth (38.8 %), followed by premolars (33.1 %), incisors (25.9 %), and molars (2.2 %), 55.4 % of the patients with canine and incisor fractures being large breed dogs. Fractures of premolars (mostly of 108, 208) were divided evenly irrespective of breed or body size. Nonsurgical endodontic treatment yielded good therapeutic results in most cases, but repeated treatment was necessary in some patients

Effects of hydrogen peroxide bleaching strips on tooth surface color, surface microhardness, surface and subsurface ultrastructure, and microchemical (Raman spectroscopic) composition.

Science.gov (United States)

Duschner, Heinz; Götz, Hermann; White, Donald J; Kozak, Kathleen M; Zoladz, James R

2006-01-01

This study examined the effects of hydrogen peroxide tooth bleaching strips on the surface hardness and morphology of enamel and the ultrastructure and chemical composition of enamel and dentin in vitro. Sound human molars were ground and polished to prepare a uniform substrate for bleaching treatments. A cycling treatment methodology was employed which alternated ex vivo human salivary exposures with bleaching treatments under conditions of controlled temperature and durations of treatment. Bleaching treatments included commercial Crest Whitestrips bleaching strips, which utilize hydrogen peroxide in a gel as the in situ bleaching source at 6.0 and 6.5% concentrations of H2O2. Control treatments included an untreated group. Crest Whitestrips bleaching included treatment exposures simulating 2x the recommended clinical exposures (28 hours bleaching). Surface color measurements were taken prior to and following bleaching to ensure tooth bleaching activity. The effects of bleach on physical properties of enamel were assessed with microhardness measures. Ultrastructural effects were classified by surface and subsurface confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) techniques. In addition, the effects of bleaching on tooth microchemical composition was studied in different tooth regions by coincident assessment of Raman spectroscopic signature. Color assessments confirmed significant ex vivo tooth bleaching by Whitestrips. Surface microhardness and SEM measures revealed no deleterious effects on the enamel surfaces. CLSM micromorphological assessments supported the safety of hydrogen peroxide bleaching strips both on surface and subsurface enamel, DEJ, and dentin ultrastructure. Raman spectroscopy analysis demonstrated no obvious effects of bleaching treatments on the microchemical composition of enamel and dentin. These results confirm that tooth bleaching with hydrogen peroxide whitening strips does not produce changes in surface

Soft Tissue Closure of Grafted Extraction Sockets in the Anterior Maxilla: A Modified Palatal Pedicle Connective Tissue Flap Technique.

Science.gov (United States)

El Chaar, Edgard; Oshman, Sarah; Cicero, Giuseppe; Castano, Alejandro; Dinoi, Cinzia; Soltani, Leila; Lee, Yoonjung Nicole

Localized ridge resorption, the consequence of socket collapse, following tooth extraction in the anterior maxilla can adversely affect esthetics, function, and future implant placement. Immediate grafting of extraction sockets may help preserve natural ridge contours, but a lack of available soft tissue can compromise the final esthetic outcome. The presented modified rotated palatal pedicle connective tissue flap is a useful technique for simultaneous soft tissue coverage and augmentation of grafted sockets to improve esthetic outcome. This article delineates its advantages through the presentation of a four-case series using this new technique.

A model of growth restraints to explain the development and evolution of tooth shapes in mammals.

Science.gov (United States)

Osborn, Jeffrey W

2008-12-07

The problem investigated here is control of the development of tooth shape. Cells at the growing soft tissue interface between the ectoderm and mesoderm in a tooth anlage are observed to buckle and fold into a template for the shape of the tooth crown. The final shape is created by enamel secreted onto the folds. The pattern in which the folds develop is generally explained as a response to the pattern in which genes are locally expressed at the interface. This congruence leaves the problem of control unanswered because it does not explain how either pattern is controlled. Obviously, cells are subject to Newton's laws of motion so that mechanical forces and constraints must ultimately cause the movements of cells during tooth morphogenesis. A computer model is used to test the hypothesis that directional resistances to growth of the epithelial part of the interface could account for the shape into which the interface folds. The model starts with a single epithelial cell whose growth is constrained by 4 constant directional resistances (anterior, posterior, medial and lateral). The constraints force the growing epithelium to buckle and fold. By entering into the model different values for these constraints the modeled epithelium is induced to buckle and fold into the different shapes associated with the evolution of a human upper molar from that of a reptilian ancestor. The patterns and sizes of cusps and the sequences in which they develop are all correctly reproduced. The model predicts the changes in the 4 directional constraints necessary to develop and evolve from one tooth shape into another. I conclude more generally expressed genes that control directional resistances to growth, not locally expressed genes, may provide the information for the shape into which a tooth develops.

Bioactive Polymeric Composites for Tooth Mineral Regeneration: Physicochemical and Cellular Aspects

Science.gov (United States)

Skrtic, Drago; Antonucci, Joseph M.

2011-01-01

Our studies of amorphous calcium phosphate (ACP)-based dental materials are focused on the design of bioactive, non-degradable, biocompatible, polymeric composites derived from acrylic monomer systems and ACP by photochemical or chemically activated polymerization. Their intended uses include remineralizing bases/liners, orthodontic adhesives and/or endodontic sealers. The bioactivity of these materials originates from the propensity of ACP, once exposed to oral fluids, to release Ca and PO4 ions (building blocks of tooth and bone mineral) in a sustained manner while spontaneously converting to thermodynamically stable apatite. As a result of ACP's bioactivity, local Ca- and PO4-enriched environments are created with supersaturation conditions favorable for the regeneration of tooth mineral lost to decay or wear. Besides its applicative purpose, our research also seeks to expand the fundamental knowledge base of structure-composition-property relationships existing in these complex systems and identify the mechanisms that govern filler/polymer and composite/tooth interfacial phenomena. In addition to an extensive physicochemical evaluation, we also assess the leachability of the unreacted monomers and in vitro cellular responses to these types of dental materials. The systematic physicochemical and cellular assessments presented in this study typically provide model materials suitable for further animal and/or clinical testing. In addition to their potential dental clinical value, these studies suggest the future development of calcium phosphate-based biomaterials based on composite materials derived from biodegradable polymers and ACP, and designed primarily for general bone tissue regeneration. PMID:22102967

3D tooth microwear texture analysis in fishes as a test of dietary hypotheses of durophagy

Science.gov (United States)

Purnell, Mark A.; Darras, Laurent P. G.

2016-03-01

An understanding of how extinct animals functioned underpins our understanding of past evolutionary events, including adaptive radiations, and the role of functional innovation and adaptation as drivers of both micro- and macroevolution. Yet analysis of function in extinct animals is fraught with difficulty. Hypotheses that interpret molariform teeth in fishes as evidence of durophagous (shell-crushing) diets provide a good example of the particular problems inherent in the methods of functional morphology. This is because the assumed close coupling of form and function upon which the approach is based is weakened by, among other things, behavioural flexibility and the absence of a clear one to one relationship between structures and functions. Here we show that ISO 25178-2 standard parameters for surface texture, derived from analysis of worn surfaces of molariform teeth of fishes, vary significantly between species that differ in the amount of hard-shelled prey they consume. Two populations of the Sheepshead Seabream (Archosargus probatocephalus) were studied. This fish is not a dietary specialist, and one of the populations is known to consume more vegetation and less hard-shelled prey than the other; this is reflected in significant differences in their microwear textures. The Archosargus populations differ significantly in their microwear from the specialist shell-crusher Anarhichas lupus (the Atlantic Wolffish). Multivariate analysis of these three groups of fishes lends further support to the relationship between diet and tooth microwear, and provides robust validation of the approach. Application of the multivariate models derived from microwear texture in Archosargus and Anarhichas to a third fish species—the cichlid Astatoreochromis alluaudi—successfully separates wild caught fish that ate hard-shelled prey from lab-raised fish that did not. This cross-taxon validation demonstrates that quantitative analysis of tooth microwear texture can

3D tooth microwear texture analysis in fishes as a test of dietary hypotheses of durophagy

International Nuclear Information System (INIS)

Purnell, Mark A; Darras, Laurent P G

2016-01-01

An understanding of how extinct animals functioned underpins our understanding of past evolutionary events, including adaptive radiations, and the role of functional innovation and adaptation as drivers of both micro- and macroevolution. Yet analysis of function in extinct animals is fraught with difficulty. Hypotheses that interpret molariform teeth in fishes as evidence of durophagous (shell-crushing) diets provide a good example of the particular problems inherent in the methods of functional morphology. This is because the assumed close coupling of form and function upon which the approach is based is weakened by, among other things, behavioural flexibility and the absence of a clear one to one relationship between structures and functions. Here we show that ISO 25178-2 standard parameters for surface texture, derived from analysis of worn surfaces of molariform teeth of fishes, vary significantly between species that differ in the amount of hard-shelled prey they consume. Two populations of the Sheepshead Seabream (Archosargus probatocephalus) were studied. This fish is not a dietary specialist, and one of the populations is known to consume more vegetation and less hard-shelled prey than the other; this is reflected in significant differences in their microwear textures. The Archosargus populations differ significantly in their microwear from the specialist shell-crusher Anarhichas lupus (the Atlantic Wolffish). Multivariate analysis of these three groups of fishes lends further support to the relationship between diet and tooth microwear, and provides robust validation of the approach. Application of the multivariate models derived from microwear texture in Archosargus and Anarhichas to a third fish species—the cichlid Astatoreochromis alluaudi—successfully separates wild caught fish that ate hard-shelled prey from lab-raised fish that did not. This cross-taxon validation demonstrates that quantitative analysis of tooth microwear texture can

Determination of orthodontic tooth movement and tissue reaction following demineralized freeze-dried bone allograft grafting intervention

Science.gov (United States)

Seifi, Massoud; Ghoraishian, Seyed Ahmad

2012-01-01

Background: Socket preservation after tooth extraction is one of the indications of bone grafting to enhance preorthodontic condition. The aim of this study is to determine the effects of socket preservation on the immediate tooth movement, alveolar ridge height preservation and orthodontic root resorption. Materials and Methods: In a split-mouth technique, twelve sites in three dogs were investigated as an experimental study. Crushed demineralized freeze-dried bone allograft (DFDBA) (CenoBone®) was used as the graft material. The defects were made by the extraction of 3rd premolar. On one side of each jaw, the defects were preserved by DFDBA and defects of the other side left opened as the control group. Simultaneously the teeth adjacent to the defects were pulled together by a NiTi coil spring. After eight weeks, the amount of (OTM), alveolar height, and root resorption were measured. Analysis of variance was used for purpose of comparison. Results: There was a slight increase in OTM at grafted sites as they were compared to the control sites (Presorption in control site and successful socket preservation in experimental site were observed. Reduction of root resorption at the augmented site was significant compared to the normal healing site (Presorption. PMID:22623939

Immediate postoperative outcome of orthognathic surgical planning, and prediction of positional changes in hard and soft tissue, independently of the extent and direction of the surgical corrections required

DEFF Research Database (Denmark)

Donatsky, Ole; Bjørn-Jørgensen, Jens; Hermund, Niels Ulrich

2011-01-01

orthognathic correction using the computerised, cephalometric, orthognathic, surgical planning system (TIOPS). Preoperative cephalograms were analysed and treatment plans and prediction tracings produced by computerised interactive simulation. The planned changes were transferred to models and finally...... with the presently included soft tissue algorithms, the current study shows relatively high mean predictability of the immediately postoperative hard and soft tissue outcome, independent of the extent and direction of required orthognathic correction. Because of the relatively high individual variability, caution...

Investigation of some parameters influencing the sensitivity of human tooth enamel to gamma radiation using electron paramagnetic resonance

International Nuclear Information System (INIS)

El-Faramawy, N.

2008-01-01

Electron paramagnetic resonance (EPR) has been successfully used as a physical technique for gamma radiation dose reconstruction using calcified tissues. To minimize potential discrepancies between EPR readings in future studies, the effects of cavity response factor, tooth position and donor gender on the estimated gamma radiation dose were studied. It was found that the EPR response per sample mass used for assessment of doses in teeth outside of the 70-100 mg range should be corrected by a factor which is a function of the sample mass. In the EPR measurements, the difference in sensitivity of different tooth positions to γ-radiation was taken into consideration. It was determined that among all the premolars and molars tooth positions, the relative standard deviation of sensitivity was 6.5%, with the wisdom teeth and the first molars having the highest and lowest sensitivity to γ-radiation, respectively. The current results reveal no effect of the donor gender on the sensitivity to γ-radiation. (author)

Tooth cusp sharpness as a dietary correlate in great apes.

Science.gov (United States)

Berthaume, Michael A

2014-02-01

Mammalian molars have undergone heavy scrutiny to determine correlates between morphology and diet. Here, the relationship between one aspect of occlusal morphology, tooth cusp radius of curvature (RoC), and two broad dietary categories, folivory and frugivory, is analyzed in apes. The author hypothesizes that there is a relationship between tooth cusp RoC and diet, and that folivores have sharper teeth than frugivores, and further test the correlation between tooth cusp RoC and tooth cusp size. Eight measures of tooth cusp RoC (two RoCs per cusp) were taken from 53 M(2) s from four species and subspecies of frugivorous apes (Pongo pygmaeus, Pan troglodytes troglodytes, Pan troglodytes schweinfurthii, and Gorilla gorilla gorilla) and two subspecies of folivorous apes (Gorilla beringei beringei, and Gorilla beringei graueri). Phylogenetically corrected ANOVAs were run on the full dataset and several subsets of the full dataset, revealing that, when buccolingual RoCs are taken into account, tooth cusp RoCs can successfully differentiate folivores and frugivores. PCAs revealed that folivores consistently had duller teeth than frugivores. In addition, a weak, statistically significant positive correlation exists between tooth cusp size and tooth cusp RoC. The author hypothesizes differences in tooth cusp RoC are correlated with wear rates, where, per vertical unit of wear, duller cusps will have a longer length of exposed enamel ridge than sharper cusps. More data need to be gathered to determine if the correlation between tooth cusp RoC and tooth cusp size holds true when small primates are considered. Copyright © 2013 Wiley Periodicals, Inc.

2H Stable Isotope Analysis of Tooth Enamel: A Pilot Study

Science.gov (United States)

Holobinko, Anastasia; Kemp, Helen; Meier-Augenstein, Wolfram; Prowse, Tracy; Ford, Susan

2010-05-01

Stable isotope analysis of biogenic tissues such as tooth enamel and bone mineral has become a well recognized and increasingly important method for determining provenance of human remains, and has been used successfully in bioarchaeological studies as well as forensic investigations (Lee-Thorp, 2008; Meier-Augenstein and Fraser, 2008). Particularly, 18O and 2H stable isotopes are well established proxies as environmental indicators of climate (temperature) and source water and are therefore considered as indicators of geographic life trajectories of animals and humans (Hobson et al., 2004; Schwarcz and Walker, 2006). While methodology for 2H analysis of human hair, fingernails, and bone collagen is currently used to determine geographic origin and identify possible migration patterns, studies involving the analysis of 2H in tooth enamel appear to be nonexistent in the scientific literature. The apparent lack of research in this area is believed to have two main reasons. (1) Compared to the mineral calcium hydroxylapatite Ca10(PO4)6(OH)2, in tooth enamel forming bio-apatite carbonate ions replace some of the hydroxyl ions at a rate of one CO32 replacing two OH, yet published figures for the degree of substitution vary (Wopenka and Pasteris, 2005). (2) Most probably due to the aforementioned no published protocols exist for sample preparation and analytical method to obtain δ2H-values from the hydroxyl fraction of tooth enamel. This dilemma has been addressed through a pilot study to establish feasibility of 2H stable isotope analysis of ground tooth enamel by continuous-flow isotope ratio mass spectrometry (IRMS) coupled on-line to a high-temperature conversion elemental analyzer (TC/EA). An array of archaeological and modern teeth has been analyzed under different experimental conditions, and results from this pilot study are being presented. References: Lee-Thorp, J.A. (2008) Archaeometry, 50, 925-950 Meier-Augenstein, W. and Fraser, I. (2008) Science & Justice

Hard- and soft-tissue contributions to the esthetics of the posed smile in growing patients seeking orthodontic treatment.

Science.gov (United States)

McNamara, Laurie; McNamara, James A; Ackerman, Marc B; Baccetti, Tiziano

2008-04-01

The purpose of this investigation was to broaden the understanding of how various skeletal, dental, and soft-tissue relationships are related to the esthetics of the smile in patients with malocclusions before orthodontic treatment. Images of the posed smile were captured from digital video clips of 60 growing patients (33 girls, 27 boys) seeking orthodontic treatment; they were judged by panels of laypersons and orthodontists. Discriminant analysis identified determinants of the "pleasing smile" from the results of a visual analog scale. Quantitative measurements of the soft and hard tissues were made by using the smile images, cephalometric radiographs, and study models. The esthetics of the smile were correlated with specific skeletal, dental, and soft-tissue structures in the anteroposterior, vertical, and transverse dimensions (Pearson test on non-topographic correlations). The esthetic smile judgments of orthodontists agreed with those of laypersons (r >0.93). The vertical thicknesses of the lips were the most significant component of a pleasant smile, for both the orthodontists (upper lip) and laypersons (lower lip) (discriminant power: 75%). The vertical thickness of the upper lip had a significant positive correlation with the position of the maxillary incisor. Vertical lip thickness proved to be the most influential variable in smile esthetics. The significant relationship of incisor protrusion with the vertical thickness of the vermilion border of the upper lip must be considered when planning orthodontic treatment.

Life of a Tooth: A Visual Timeline

Medline Plus

Full Text Available ... Dentist Your Family's Oral Health About the AGD Dental care and oral health information you need from ... Menstrual Calendar for Tooth Extraction Learn what those dental words mean. The Life of a Tooth Home | ...

Is gingival recession a consequence of an orthodontic tooth size and/or tooth position discrepancy? "A paradigm shift".

Science.gov (United States)

Richman, Colin

2011-01-01

Gingival recession (GR) is a commonly observed dental lesion. The underlying etiology has not been clearly identified, although several theories have been suggested. Tooth crowding or tooth malalignment is also frequently observed, with both conditions appearing to be more prevalent in developed countries with heterogeneous populations. A total of 25 consecutively treated patients representing 72 teeth and demonstrating facial clinical GR of > 3 mm were examined clinically, photographically, and with 3-dimensional radiology using conebeam computed tomography. All examined teeth presented with normal interproximal probing depths and attachment levels (teeth demonstrating > 3 mm of GR presented with significantly prominent facial tooth contours and associated alveolar bone dehiscences. Most involved teeth presented with their root structures extending beyond the facial alveolar bony housing (fenestrations). This represents a discrepancy between tooth size and alveolar bone dimensions in the buccolingual, axial, and sagittal orientation. Fewer involved teeth were malpositioned toward the buccal aspect. Both conditions were associated with facial alveolar bone dehiscences and associated GR. This study suggests tooth volume and/or tooth position within the alveolar bony housing strongly correlate with GR. All nonperiodontitis-involved teeth with GR were associated with either wider teeth or facially aligned teeth. However, it is emphasized that all facially aligned teeth, or "larger" teeth, do not necessarily present with GR. Based on these findings, the radiographic-supporting bone index is proposed. This index should facilitate appropriate evaluation of the alveolar bone supporting the mucogingival complex, both on the facial and lingual aspect of teeth. Further investigations are needed to support these preliminary data.

Gastroesophageal Reflux Disease and Tooth Erosion

Directory of Open Access Journals (Sweden)

Sarbin Ranjitkar

2012-01-01

Full Text Available The increasing prevalence of gastroesophageal reflux disease (GERD in children and adults, and of “silent refluxers” in particular, increases the responsibility of dentists to be alert to this potentially severe condition when observing unexplained instances of tooth erosion. Although gastroesophageal reflux is a normal physiologic occurrence, excessive gastric and duodenal regurgitation combined with a decrease in normal protective mechanisms, including an adequate production of saliva, may result in many esophageal and extraesophageal adverse conditions. Sleep-related GERD is particularly insidious as the supine position enhances the proximal migration of gastric contents, and normal saliva production is much reduced. Gastric acid will displace saliva easily from tooth surfaces, and proteolytic pepsin will remove protective dental pellicle. Though increasing evidence of associations between GERD and tooth erosion has been shown in both animal and human studies, relatively few clinical studies have been carried out under controlled trial conditions. Suspicion of an endogenous source of acid being associated with observed tooth erosion requires medical referral and management of the patient as the primary method for its prevention and control.

Tooth positioners and their effects on treatment outcome.

Science.gov (United States)

Pravindevaprasad, A; Therese, Beena Agnes

2013-07-01

Malocclusion can also be corrected by means of clear removable appliances called as "tooth positioners" or "aligners". A tooth positioner is used to control settling and to minimize or eliminate relapse of the teeth after an orthodontic treatment. In this article, a complete review of the objectives, course of treatment, fabrication, and the materials used for fabrication of tooth positioners along with their importance and disadvantages were discussed. Tooth positioners did improve the overall orthodontic treatment outcome as quantified by the ABO (American Board of orthodontics) objective scoring method. But once the initial occlusal contact was achieved, the vertical movement of teeth was found to be inhibited.

Tooth-marked small theropod bone: an extremely rare trace

DEFF Research Database (Denmark)

Jacobsen, Aase Roland

2001-01-01

Tooth-marked dinosaur bones provide insight into feeding behaviours and biting strategies of theropod dinosaurs. The majority of theropod tooth marks reported to date have been found on herbivorous dinosaur bones, although some tyrannosaurid bones with tooth marks have also been reported. In 1988...

Association between Severity of Tooth Wear and Dentinal Hypersensitivity

Directory of Open Access Journals (Sweden)

Ashok Ayer

2016-11-01

Full Text Available Background & Objectives: Tooth wear (attrition, abrasion, erosion, and abfraction is perceived globally as ever increasing problem. Several outcome of the tooth wear are hypersensitivity, esthetic problems, functional impairment, annoyance to the patient, and fracture of the tooth. Among these, the measurable and more commonly reported outcome is hypersensitivity to stimuli. Although dentin hypersensitivity is a common clinical condition and is generally reported by the patient after experiencing a sharp, short pain caused by one of the several different external stimuli, it is often inadequately understood. None of the scientific literature available till date attempted to establish the relationship between tooth wear and dentin hypersensitivity which could be a key factor in monitoring those patients.  The aim of the study was to estimate the association between severity of teeth wear and sensitivity in the patients with reported dentinal hypersensitivity.Materials & Methods: Fifty patients with dentin hypersensitivity were investigated for tooth wear. Tooth wear measured using exact tooth wear index and level of sensitivity to stimuli was recorded using a numerical rating scale. Results: Enamel wear at cervical region of teeth showed a positive correlation (p=.010, similarly, dentin wear at cervical region of teeth showed positive correlation and significant association (p<.001 with dentinal hypersensitivity.Conclusion: The observation supports a significant association between severities of tooth surface wear and dentinal hypersensitivity.

Orientation and deformation of mineral crystals in tooth surfaces.

Science.gov (United States)

Fujisaki, Kazuhiro; Todoh, Masahiro; Niida, Atsushi; Shibuya, Ryota; Kitami, Shunsuke; Tadano, Shigeru

2012-06-01

Tooth enamel is the hardest material in the human body, and it is mainly composed of hydroxyapatite (HAp)-like mineral particles. As HAp has a hexagonal crystal structure, X-ray diffraction methods can be used to analyze the crystal structure of HAp in teeth. Here, the X-ray diffraction method was applied to the surface of tooth enamel to measure the orientation and strain of the HAp crystals. The c-axis of the hexagonal crystal structure of HAp was oriented to the surface perpendicular to the tooth enamel covering the tooth surface. Thus, the strain of HAp at the surface of teeth was measured by X-ray diffraction from the (004) lattice planes aligned along the c-axis. The X-ray strain measurements were conducted on tooth specimens with intact surfaces under loading. Highly accurate strain measurements of the surface of tooth specimens were performed by precise positioning of the X-ray irradiation area during loading. The strains of the (004) lattice plane were measured at several positions on the surface of the specimens under compression along the tooth axis. The strains were obtained as tensile strains at the labial side of incisor tooth specimens. In posterior teeth, the strains were different at different measurement positions, varying from tensile to compressive types. Copyright © 2012 Elsevier Ltd. All rights reserved.

Life of a Tooth: A Visual Timeline

Medline Plus

Full Text Available ... Child First See a Dentist? The History of Dental Advances Why is Oral Health Important for Men? What is Baby Bottle Tooth Decay? Learn what those dental words mean. The Life of a Tooth Home | ...

Hard electronics; Hard electronics

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

Inhibitory effect of interferon-γ on experimental tooth movement in mice.

Science.gov (United States)

Kohara, Haruka; Kitaura, Hideki; Yoshimatsu, Masako; Fujimura, Yuji; Morita, Yukiko; Eguchi, Toshiko; Yoshida, Noriaki

2012-09-01

The aim of this study was to investigate the effects of interferon (IFN)-γ on experimental tooth movement in mice using a murine experimental tooth movement model. An Ni-Ti closed-coil spring was inserted between the upper-anterior alveolar bones and the upper-left first molars in mice. We evaluated the relationship between local Ifn-γ mRNA levels and orthodontic tooth movement. In other experiments, IFN-γ was injected adjacent to each first molar every other day during tooth movement. After 12 days, the amount of tooth movement was measured. Tartrate-resistant acid phosphatase (TRAP)-positive cells at the pressure side of each experimental tooth were counted as osteoclasts. Local Ifn-γ mRNA expression increased with orthodontic tooth movement. The number of TRAP-positive cells increased on the pressure side of the first molar. In contrast, the degree of tooth movement and the number of TRAP-positive cells on the pressure side in IFN-γ-injected mice were less than those of control mice. IFN-γ was induced in experimental tooth movement, and could inhibit mechanical force-loaded osteoclastogenesis and tooth movement. These results suggest that IFN-γ might be useful in controlling orthodontic tooth movement because of its inhibitory action on excessive osteoclastogenesis during this movement.

Tooth bleaching and young adults in Nigeria: knowledge, experiences and intention.

Science.gov (United States)

Azodo, C C; Ogbomo, A C; Agbor, M A

2012-12-01

To assess the knowledge, experiences and intention to have tooth bleaching among young adults studying in a Nigerian University. A cross-section of part-time undergraduate students of University of Benin, Benin City, Nigeria were studied in 2010 using a self-administered questionnaire. About three-quarters 289 (72.4%) of the respondents reported awareness of at least one cause of tooth discoloration. A total of 143 (35.8%) of the respondents have heard of tooth bleaching with main sources of information being friends/relatives, dentists and the internet. One-third 132 (33.1%) of the respondents correctly identified that the aim of tooth bleaching was to make the teeth whiter. The respondents that had correct knowledge about mechanism, duration and complications of tooth bleaching were 51 (12.8%), 25 (6.3%) and 35 (8.8%) respectively. The major perceived benefits of tooth bleaching reported by the respondents were self confidence boost 152 (38.1%) and improvement of one's beauty 107 (26.8%). Out of the 68 (17.0%) respondents that have attempted tooth bleaching, 36 (52.9%) used tooth whitening toothpaste. Out of the 151 (37.8%) respondents that expressed intention of having tooth bleaching procedure, 32 (21.2%) would pursue the course, no matter the cost. In the studied population, knowledge of tooth discoloration was high, awareness and experiences of tooth bleaching were low but significant number expressed intention of having tooth bleaching. It is important that dentists increase oral health information particularly tooth bleaching information accessibility to the young adult population to improve the knowledge and prevent adverse effects.

Tooth Decay Process: How to Reverse It and Avoid a Cavity

Science.gov (United States)

... Health Info Health Topics Tooth Decay Tooth decay (dental caries) is damage to a tooth that can happen ... Clinical Trials Show All Clinical Trials Data & Statistics Dental caries (tooth decay) remains the most prevalent chronic disease ...

Tooth polishing: The current status

Directory of Open Access Journals (Sweden)

Madhuri Alankar Sawai

2015-01-01

Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

Effects of wine consumption on saliva secretion and composition

NARCIS (Netherlands)

Brand, H.S.; Tjoe Fat, G.M.; Veerman, E.C.I.; Mazzei, A.; D'Arco, A.

2009-01-01

Dental erosion is defined as a pathologic, chronic localized loss of dental hard tissue that is chemically etched away from the tooth surface by acid and/or chelation without bacterial involvement (Ten Cate and Imfeld, 1996). The decalcified hydroxyapatite surfaces of the teeth become soft and more

Imaging of the human tooth cementum ultrastructure of archeological teeth, using hard x-ray microtomography to determine age-at-death and stress periods

Science.gov (United States)

Mani-Caplazi, Gabriela; Schulz, Georg; Deyhle, Hans; Hotz, Gerhard; Vach, Werner; Wittwer-Backofen, Ursula; Müller, Bert

2017-09-01

Tooth cementum annulation (TCA) is used by anthropologists to decipher age-at-death and stress periods based on yearly deposited incremental lines (ILs). The destructive aspect of the TCA method, which requires cutting the tooth root in sections to display the ILs, using transmission light microscopy, can be problematic for archeological teeth, and so a non-invasive imaging technique is preferred. The purpose of this study is to evaluate conventional micro computed tomography (μCT) and synchrotron radiation-based X-ray micro computed tomography (SRμCT) as a non-destructive technique to explore the tooth cementum ultrastructure and to display ILs. Seven archeological teeth from the Basel- Spitalfriedhof collection (patients died between 1845 and 1868 in the city hospital) were selected for the μCT experiments. This collection is considered a unique worldwide reference series in the anthropological science community, due to the high level of documented life history data in the medical files and the additionally collected and verified birth history by genealogists. The results demonstrate that the conventional μCT is complementary to the SRμCT allowing to prescreen the teeth using conventional μCT to identify the appropriate specimens and areas for the SRμCT measurements. SRμCT displayed cementum ring structure corresponding to the ILs in the microscope view in archeological teeth in a non-invasive fashion with the potential for more accurate assessments of ILs compared to conventional techniques. The ILs were mainly clearly visible, and it was possible to count them for age-at-death assessment and identify qualitatively irregular ILs which could constitute stress markers.

Cracked tooth syndrome: A report of three cases.

Science.gov (United States)

Sadasiva, Kadandale; Ramalingam, Sathishmuthukumar; Rajaram, Krishnaraj; Meiyappan, Alagappan

2015-08-01

Cracked tooth syndrome (CTS), the term was coined by Cameron in 1964, which refers to an incomplete fracture of a vital posterior tooth extending to the dentin and occasionally into the pulp. CTS has always been a nightmare to the patient because of its unpredictable symptoms and a diagnostic dilemma for the dental practitioner due to its variable, bizarre clinical presentation. The treatment planning and management of CTS has also given problems and challenges the dentist as there is no specific treatment option. The management of CTS varies from one case to another or from one tooth to another in the same individual based on the severity of the symptoms and depth of tooth structure involved. After all, the prognosis of such tooth is still questionable and requires continuous evaluation. This article aims at presenting a series three cases of CTS with an overview on the clinical presentation, diagnosis and the different treatment options that varies from one case to another.

A Semi-automatic Algorithm for Preliminary Assessment of Labial Gingiva and Alveolar Bone Thickness of Maxillary Anterior Teeth.

Science.gov (United States)

Chen, Sheng-Hong; Chan, Hsun-Liang; Lu, Yongning; Ong, Sim-Heng; Wang, Hom-Lay; Ko, Eng Hong; Chang, Po-Chun

Soft and hard tissue volumes are critical for implant placement and long-term stability. Although the literature has adequately addressed tissue biotypes of Western populations, pertinent information about Asian populations is limited. This study aimed to evaluate the soft and hard tissue profiles of the maxillary anterior teeth of the Taiwanese population using a semi-automatic algorithm. Cone beam computed tomography images of 11 adults with well-aligned maxillary anterior teeth were overlaid with those of cast models, based on the tooth crowns manually outlined by two independent observers. Each tooth was digitally trisected mesiodistally and apicocoronally. The thicknesses of the labial gingiva and alveolar bone were measured using a customized software program. No obvious difference between the observers was noted regarding the dimension of tooth crowns. The average thicknesses of the labial gingiva, the labial alveolar bone, and the palatal alveolar bone were 1.76 ± 0.11 mm, 1.02 ± 0.12 mm, and 1.80 ± 0.31 mm, respectively, with no significant differences between teeth. All parameters were thicker in the apical region than in the cervical region, and the alveolar bone was thinner in the midlabial region of incisors than in the interproximal regions. The thinnest areas were the midcervical compartment of the right central incisor (0.53 ± 0.33 mm) for the labial gingiva, the midcervical compartment of the right lateral incisor (0.23 ± 0.10 mm) for the labial alveolar bone, and the mesiocervical compartment of the left central incisor (0.33 ± 0.09 mm) for the palatal alveolar bone. This study presents an objective and comprehensive methodology for evaluating the soft and hard tissue profiles of maxillary anterior teeth and may be of value for presurgical planning for immediate implant placement. The results suggest that profiles of the Taiwanese subjects are similar to profiles of Western populations.

The effect of Curcuma domestica Val - Tamarindus indica L mixed solution (“kunyit asam” on microhardness and roughnessof human tooth enamel

Directory of Open Access Journals (Sweden)

Andi Pratiwi Iljas

2016-06-01

Full Text Available Nowadays,peoples tendto seekan alternative treatment from traditional plants because it is side effects relatively less than synthetic drugs. One of the famous traditional medicinedrinks in Indonesia is “kunyit asam”. People was make it with mixed both Curcuma domestica Val and Tamarindus indica L. Beside it has many advantages for health such as increasing stamina, it also has a good taste, so many people consumed it. However, the acid content in this drink maycause enamel erosion. Therefore the aim of this present study is to determine thein vitro effect of “kunyit asam” solution towards microhardness and roughness of human enamel tooth. The pH of solutionwas measure using a digital pH meter, while the calcium content measure using the Atomic Absorption Spectroscopy (AAS. This study used 40 permanent maxillary first incisor that has been extracted from the patient who came to dental polyclinic of hospitals in Polewali Mandar regency, West Sulawesi Province during February 2015-April 2015 period. The roots of the teeth were removed at the cementoenamel junction. Tooth crowns placed on blocks orthoplast with labial surface facing up. Samples were randomly divided into 2 groups equally andimmersed in aquadest solution pH 7.0 (negative control (Group I or “kunyit asam” solution pH 3.0 (Group II for 14, 28, 42 and 56 minutes respectively. An Universal Hardness Tester (Affri® Universal Hardness Tester, Japan was used to measure enamel surface microhardness, while to measure enamel surface roughness wasused a Roughness Tester (Surftest 301 Mitutoyo, Japan. Both measure were done before and after immersed in solution. Data were statistically analyzed using Levene, paired-t one-way Analysis of Variance (ANOVA and Least Significance Different (LSD tests. The results of present study showed that there was no significant difference (p>0.05 microhardness but significant differences (p<0.05 for the roughness of tooth enamelbefore and

Dissimilar friction stir welding of 6061 Al to T2 pure Cu adopting tooth-shaped joint configuration: Microstructure and mechanical properties

Energy Technology Data Exchange (ETDEWEB)

Zhang, Wei; Shen, Yifu, E-mail: yfshen_nuaa@hotmail.com; Yan, Yinfei; Guo, Rui

2017-04-06

In this paper, dissimilar 6061aluminum alloy and commercial pure copper were friction stir butt welded adopting tooth-shaped joint configuration to investigate the influence of Al/Cu content in welding bead (WB) on the microstructure and mechanical properties of the joint. At preliminary tests, optimal welding parameters were determined to guarantee proper heat input. Welding experiments were performed with the dimensions of the tooth as variables, which is a special technique to tailor Al/Cu content in WB. Macro and microstructure of the cross section of the joints were characterized via optical microscopy (OM) and Scanning Electron Microscopy (SEM) equipped with energy dispersive spectroscopy (EDS). Special band structure(BS) showing lamellar-like flow characteristic is worthy of noticing. Additionally, dispersive Cu particles (DP), forming composite-like structure, were captured. High Cu concentration, however, yielded a harsh material flow due to its high plasticized temperature and poor flowability and can not produce reliable metallurgical bonding. Microhardness of the joint was investigated and the high hardness was caused mainly by the hard intermetallic compounds (IMCs). Besides, tensile tests were conducted to evaluate the joint performance. Based on the result analysis, this joint form has special advantage in tailoring Al/Cu content in WB and controlling the microstructure that imposes significant influence on mechanical properties of the joints.

Dissimilar friction stir welding of 6061 Al to T2 pure Cu adopting tooth-shaped joint configuration: Microstructure and mechanical properties

International Nuclear Information System (INIS)

Zhang, Wei; Shen, Yifu; Yan, Yinfei; Guo, Rui

2017-01-01

In this paper, dissimilar 6061aluminum alloy and commercial pure copper were friction stir butt welded adopting tooth-shaped joint configuration to investigate the influence of Al/Cu content in welding bead (WB) on the microstructure and mechanical properties of the joint. At preliminary tests, optimal welding parameters were determined to guarantee proper heat input. Welding experiments were performed with the dimensions of the tooth as variables, which is a special technique to tailor Al/Cu content in WB. Macro and microstructure of the cross section of the joints were characterized via optical microscopy (OM) and Scanning Electron Microscopy (SEM) equipped with energy dispersive spectroscopy (EDS). Special band structure(BS) showing lamellar-like flow characteristic is worthy of noticing. Additionally, dispersive Cu particles (DP), forming composite-like structure, were captured. High Cu concentration, however, yielded a harsh material flow due to its high plasticized temperature and poor flowability and can not produce reliable metallurgical bonding. Microhardness of the joint was investigated and the high hardness was caused mainly by the hard intermetallic compounds (IMCs). Besides, tensile tests were conducted to evaluate the joint performance. Based on the result analysis, this joint form has special advantage in tailoring Al/Cu content in WB and controlling the microstructure that imposes significant influence on mechanical properties of the joints.

Factors associated with tooth loss and prosthodontic status among Sudanese adults.

Science.gov (United States)

Khalifa, Nadia; Allen, Patrick F; Abu-bakr, Neamat H; Abdel-Rahman, Manar E

2012-01-01

A study was conducted to determine the degree of tooth loss, factors influencing tooth loss, and the extent of prosthodontic rehabilitation in Sudanese adults (≥ 16 years old) attending outpatient clinics in Khartoum State. Pearson and multivariate analyses were used to examine the relationships between tooth loss and specific characteristics determined through interviews and clinical examinations. The mean number of missing teeth was 3.6 (SD, 4.9) and the prevalence of edentulism was 0.1%. The prevalence of tooth loss (missing at least one tooth) was 78%; 66.9% of tooth loss was due to caries, and 11.2% was attributable to other reasons. Prosthetic replacement of missing teeth was evident in 3%, whereas a need for prosthetic replacement was evident in 57%. Having teeth was associated with age, gender, and socioeconomic status; tooth loss due to caries was associated with age, tribe, frequency of tooth-brushing, and a low rate of dental consultation. Tooth loss due to other reasons was associated with age, tribe, education, periodontal pocketing, tobacco use, tooth wear, and prosthetic status. The results of the present study indicated that the major cause of tooth loss was dental caries, thus emphasizing the importance of a public prevention-based healthcare program. Replacement of missing teeth was uncommon in the study subjects, which may reflect lack of access to this type of oral healthcare.

Contaminated tooth brushes-potential threat to oral and general health

Directory of Open Access Journals (Sweden)

Rashmi Naik

2015-01-01

Full Text Available Background: Tooth brushing is most common method of maintaining oral hygiene. In removing plaque and other soft debris from the teeth, tooth brushes become contaminated with bacteria, blood, saliva and oral debris. These contaminated tooth brushes can be a source of infection. Aims and objectives: The aim of the present study was to evaluate the presence of microorganisms in the tooth brushes and to investigate the effect of disinfectants such as chlorhexidine gluconate, sodium hypochlorite and water to decontaminate them. Materials and Methods: Twenty-one children were asked to brush their teeth for 5 days with a tooth brush. The tooth brushes were put in Robertson′s Cooked Meat broth and were observed for growth of Streptococcal microorganisms. These tooth brushes were then placed in disinfectants such as 0.2% chlorhexidine gluconate (Group I, 1% sodium hypochlorite (Group II and water (Group III for 24 hrs and then cultured again. Reduction of growth of microorganisms was seen in Group I, Group II and remnants of growth seen in Group III. Conclusion: We conclude that the use of disinfectant for a tooth brush is a must for every individual at least at regular intervals.

Effect of irradiation on wound healing after tooth extraction in the rachitic rats

Energy Technology Data Exchange (ETDEWEB)

Kim, Mee Kyung; Hwang, Eui Hwan; Lee, Sang Rae [College of Dentistry, Kyung Hee University, Seoul (Korea, Republic of)

2002-03-15

To observe the histopathological changes following irradiation on the wound healing after tooth extraction in the rachitic rats. In order to carry out this study, the rats were divided into four groups: Group 1 (normal diet/non-irradiation group), Group 2 (normal diet/irradiation group), Group 3 (rachitogenic diet/non-irradiation group), and Group 4 (rachitogenic diet/irradiation group). Rachitic changes were induced with rachitogenic diet No. 2 (high calcium, low phosphorus, and Vitamin D deficient diet) for 5 weeks. After the extraction of both maxillary first molars of the rats in Group 2 and 4, the head and neck of the rats were irradiated with single absorbed dose of 10 Gy. The rats were sacrificed at the 1st, 5th, 10th, and 15th day after tooth extraction. The specimens including the extraction wound were sectioned, stained with the hematoxylin-eosin and Masson's trichrome method and examined under the light microscope. In the Group 2, the amount of newly formed bone trabeculae on the periphery of extraction socket and osteoblastic activity were reduced. In the Group 3, epithelial fusion was not revealed on the 5th day after toothe extraction and growth rate of osteoid formation was reduced. In the Group 4, necrotized tissue at the outer surface of extraction socket and destructive changes on the alveolar bones were noted on the 10th day. Epithelial fusion was not revealed and large amounts of osteoclast were noted on alveolar bone on the 15th day. The healing process of wound after tooth extraction was retarded by irradiation and especially in the rachitic rats.

Effect of irradiation on wound healing after tooth extraction in the rachitic rats

International Nuclear Information System (INIS)

Kim, Mee Kyung; Hwang, Eui Hwan; Lee, Sang Rae

2002-01-01

To observe the histopathological changes following irradiation on the wound healing after tooth extraction in the rachitic rats. In order to carry out this study, the rats were divided into four groups: Group 1 (normal diet/non-irradiation group), Group 2 (normal diet/irradiation group), Group 3 (rachitogenic diet/non-irradiation group), and Group 4 (rachitogenic diet/irradiation group). Rachitic changes were induced with rachitogenic diet No. 2 (high calcium, low phosphorus, and Vitamin D deficient diet) for 5 weeks. After the extraction of both maxillary first molars of the rats in Group 2 and 4, the head and neck of the rats were irradiated with single absorbed dose of 10 Gy. The rats were sacrificed at the 1st, 5th, 10th, and 15th day after tooth extraction. The specimens including the extraction wound were sectioned, stained with the hematoxylin-eosin and Masson's trichrome method and examined under the light microscope. In the Group 2, the amount of newly formed bone trabeculae on the periphery of extraction socket and osteoblastic activity were reduced. In the Group 3, epithelial fusion was not revealed on the 5th day after toothe extraction and growth rate of osteoid formation was reduced. In the Group 4, necrotized tissue at the outer surface of extraction socket and destructive changes on the alveolar bones were noted on the 10th day. Epithelial fusion was not revealed and large amounts of osteoclast were noted on alveolar bone on the 15th day. The healing process of wound after tooth extraction was retarded by irradiation and especially in the rachitic rats.

Overcoming esthetic challenges in the smile zone using the "roll flap procedure"

Directory of Open Access Journals (Sweden)

Rahul G Wagle

2010-01-01

Full Text Available Hard and soft tissue alveolar ridge deformities occur following the extraction of teeth, creating functional and esthetic tooth replacement challenges, especially in the esthetic zone. A surgical technique using a roll flap technique for ridge augmentation is discussed which when combined with conventional fixed partial dentures for tooth replacement creates a template of the labial and interproximal sulcus at the edentulous site, allowing for the molding of an ovate pontic resulting in greatly improved esthetics in an esthetically compromised case. This results in vastly improved restorative emergence profiles with minimal or no change in the height of the labial gingival margin and the form and height of the interproximal papillae with adjacent teeth. This technique enhances soft tissue contours adjacent to the definitive restoration that vary little from those of the original natural tooth.

Soft Tissue Surgical Procedures for Optimizing Anterior Implant Esthetics

Science.gov (United States)

Ioannou, Andreas L.; Kotsakis, Georgios A.; McHale, Michelle G.; Lareau, Donald E.; Hinrichs, James E.; Romanos, Georgios E.

2015-01-01

Implant dentistry has been established as a predictable treatment with excellent clinical success to replace missing or nonrestorable teeth. A successful esthetic implant reconstruction is predicated on two fundamental components: the reproduction of the natural tooth characteristics on the implant crown and the establishment of soft tissue housing that will simulate a healthy periodontium. In order for an implant to optimally rehabilitate esthetics, the peri-implant soft tissues must be preserved and/or augmented by means of periodontal surgical procedures. Clinicians who practice implant dentistry should strive to achieve an esthetically successful outcome beyond just osseointegration. Knowledge of a variety of available techniques and proper treatment planning enables the clinician to meet the ever-increasing esthetic demands as requested by patients. The purpose of this paper is to enhance the implant surgeon's rationale and techniques beyond that of simply placing a functional restoration in an edentulous site to a level whereby an implant-supported restoration is placed in reconstructed soft tissue, so the site is indiscernible from a natural tooth. PMID:26124837