WorldWideScience

Sample records for tool adt reference

  1. Array display tool ADT reference manual. Version 1.2

    International Nuclear Information System (INIS)

    Evans, K. Jr.

    1995-12-01

    Array Display Tool (ADT) is a Motif program to display arrays of process variables from the Advanced Photon Source control system. A typical use is to display the horizontal and vertical monitor readings. A picture of the ADT interface is here. The screen layout, apart from the menu bar, consists of two types of graphic areas in which the values for the arrays of process variables are shown: Display areas, which display one or more arrays as a function of index, and a zoom area. In the zoom area specified arrays only are displayed as a function of lattice position along with symbols for the major elements of the lattice. There can be several display areas, but at most one zoom area. When the screen is resized these areas change size proportionally. There are a number of options in the View Menu to change the way the values are displayed. It is also possible via the Options Menu to: (1) Store the current values internally. (2) Store the values from a snapshot file internally. (3) Display one of the stored sets of values along with the current values. (4) Display the difference of the current values with one of the stored sets of values. (5) Write the current values to a snapshot file. There are several (currently 5) slots in which you can store values internally. In addition you can display the values with specified reference values subtracted

  2. ADT fast losses MD

    CERN Document Server

    Priebe, A; Dehning, B; Redaelli, S; Salvachua Ferrando, BM; Sapinski, M; Solfaroli Camillocci, M; Valuch, D

    2013-01-01

    The fast beam losses in the order of 1 ms are expected to be a potential major luminosity limitation for higher beam energies after the LHC long shutdown (LS1). Therefore a Quench Test is planned in the winter 2013 to estimate the quench limit in this timescale and revise the current models. This experiment was devoted to determination the LHC Transverse Damper (ADT) as a system for fast losses induction. A non-standard operation of the ADT was used to develop the beam oscillation instead of suppressing them. The sign flip method had allowed us to create the fast losses within several LHC turns at 450 GeV during the previous test (26th March 2012). Thus, the ADT could be potentially used for the studies of the UFO ("Unidentied Falling Object") impact on the cold magnets. Verification of the system capability and investigations of the disturbed beam properties were the main objectives of this MD. During the experiment, the pilot bunches of proton beam were excited independently in the horizontal and vertical ...

  3. The LHC Transverse Damper (ADT) Performance Specification

    CERN Document Server

    Boussard, Daniel; Linnecar, Trevor Paul R; CERN. Geneva. SPS and LEP Division

    1997-01-01

    The appended document specifies the performance of the transverse damper (ADT) for the LHC. As Annex 1 of the Addendum No.1 to the Protocol of April 18, 1997; it forms part of the 1992 co-operation agreement between CERN and JINR (Dubna, Russia) concerning its participation in the LHC project. The current text is a reprint of the original version. Changes that have been agreed upon are inserted as footnotes.

  4. Cellular Basis for ADT-Induced Acceleration of Sarcopenia

    Science.gov (United States)

    2015-10-01

    1 AWARD NUMBER: W81XWH-14-1-0454 TITLE: Cellular Basis for ADT-Induced Acceleration of Sarcopenia PRINCIPAL INVESTIGATOR: Joe V...AND SUBTITLE Cellular Basis for ADT-Induced Acceleration of Sarcopenia 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH-14-1-0454 5c. PROGRAM...cell function and thereby regenerative capability contribute to the acceleration of sarcopenia observed in prostate cancer patients undergoing ADT

  5. Cognitive changes associated with ADT: a review of the literature

    Institute of Scientific and Technical Information of China (English)

    Rhoda J Jamadar; Mary J Winters; Pauline M Maki

    2012-01-01

    The use of androgen deprivation therapy (ADT) has increased since the early 1990s after early detection efforts and greater use of the prostate-specific antigen (PSA) test.Although ADT is associated with favorable clinical outcomes,ADT has been associated with an increased risk for cardiovascular disease,increased serum cholesterol,triglycerides,insulin resistance,body mass index and fat body mass.Here we review findings from 11 clinical studies examining the effects of ADT on cognition as measured by standardized tests in cognitive domains such as verbal and spatial memory.Most of these studies have important limitations,including small sample sizes,suboptimal control groups and baseline group differences in confounding factors.Despite these limitations,the best designed studies,those comparing patients on ADT to healthy controls,generally suggest that spatial memory might be especially sensitive to the effects of ADT.Critically,to date there is only one study involving random assignment of ADT versus close clinical observation.That study revealed a decrease in verbal memory with ADT,but was limited in sample size and did not include a measure of spatial memory.A recent observational study revealed no substantial evidence of cognitive impairment with ADT,even in the domain of verbal memory.Like the randomized study,however,this large observational study lacked a measure of spatial memory.Overall,the studies with the best controls suggest a potential negative impact of ADT on spatial memory,and perhaps verbal memory,and a need for continued investigation of the impact of ADT on cognition,particularly in these two cognitive domains.

  6. Revisiting the ADT mass of the five-dimensional rotating black holes with squashed horizons

    Energy Technology Data Exchange (ETDEWEB)

    Peng, Jun-Jin [Guizhou Normal University, Guizhou Provincial Key Laboratory of Radio Astronomy and Data Processing, Guiyang (China)

    2017-10-15

    We evaluate the Abbott-Deser-Tekin (ADT) mass of the five-dimensional rotating black holes with squashed horizons on two different on-shell reference backgrounds, which are the flat background and the boundary matched Kaluza-Klein (KK) monopole. The mass on the former, identified with the one on the background of the asymptotic geometry, differs from the mass on the latter by that of the KK monopole. However, each mass satisfies the first law of black hole thermodynamics. To test the results in five dimensions, we compute the mass in the context of the dimensionally reduced theory. Finally, in contrast with the original ADT formulation, its off-shell generalisation is applied to calculate the mass as well. (orig.)

  7. Revisiting the ADT mass of the five-dimensional rotating black holes with squashed horizons

    International Nuclear Information System (INIS)

    Peng, Jun-Jin

    2017-01-01

    We evaluate the Abbott-Deser-Tekin (ADT) mass of the five-dimensional rotating black holes with squashed horizons on two different on-shell reference backgrounds, which are the flat background and the boundary matched Kaluza-Klein (KK) monopole. The mass on the former, identified with the one on the background of the asymptotic geometry, differs from the mass on the latter by that of the KK monopole. However, each mass satisfies the first law of black hole thermodynamics. To test the results in five dimensions, we compute the mass in the context of the dimensionally reduced theory. Finally, in contrast with the original ADT formulation, its off-shell generalisation is applied to calculate the mass as well. (orig.)

  8. Revisiting the ADT mass of the five-dimensional rotating black holes with squashed horizons

    Science.gov (United States)

    Peng, Jun-Jin

    2017-10-01

    We evaluate the Abbott-Deser-Tekin (ADT) mass of the five-dimensional rotating black holes with squashed horizons on two different on-shell reference backgrounds, which are the flat background and the boundary matched Kaluza-Klein (KK) monopole. The mass on the former, identified with the one on the background of the asymptotic geometry, differs from the mass on the latter by that of the KK monopole. However, each mass satisfies the first law of black hole thermodynamics. To test the results in five dimensions, we compute the mass in the context of the dimensionally reduced theory. Finally, in contrast with the original ADT formulation, its off-shell generalisation is applied to calculate the mass as well.

  9. Medicare Preventive Services Quick Reference Tool

    Data.gov (United States)

    U.S. Department of Health & Human Services — This educational tool provides the following information on Medicare preventive services Healthcare Common Procedure Coding System (HCPCS)-Current Procedural...

  10. The use of Reference Management tools to improve Citation

    OpenAIRE

    Ebrahim, Nader Ale

    2016-01-01

    Reference Management tools offer an easy way of finding relevant literature, collecting references, organizing them in a database, and insert citations works in a manuscript with proper citation style. Most of the new Reference Management tools provide facility to connect with other researchers that you can’t find on other platforms. A Web-based reference management provide easier collaboration and use across multiple devices and assist you to improve publication visibility.

  11. Geographical origin: meaningful reference or marketing tool?

    DEFF Research Database (Denmark)

    Hedegaard, Liselotte

    2015-01-01

    dimensions of local culture. The French label served as inspiration for the European PDO/PGI-labels, but even if these labels are known in Denmark only five products are PDO-branded The data-collection in Denmark indicated little trust in increased sales through PDO-labelling. This was contrary to data...... of production can be positioned on a map, but there is no precise standard for the rootedness of the product in this place. Origin means to be from a place in the sense that natural factors, cultural practices and historical links contribute to the understanding of the link between food and place...... origin was the result of a crisis in French wine-production in the early 20th century. Labelling was intended to protect the reputation of a product in terms of quality and taste by referring to parcels of land where specific traditions are maintained and the resulting products embedded in collective...

  12. Nuclear Science References as a Tool for Data Evaluation

    International Nuclear Information System (INIS)

    Winchell, D.F.

    2005-01-01

    For several decades, the Nuclear Science References database has been maintained as a tool for data evaluators and for the wider pure and applied research community. This contribution will describe the database and recent developments in web-based access

  13. Statistical Bayesian method for reliability evaluation based on ADT data

    Science.gov (United States)

    Lu, Dawei; Wang, Lizhi; Sun, Yusheng; Wang, Xiaohong

    2018-05-01

    Accelerated degradation testing (ADT) is frequently conducted in the laboratory to predict the products’ reliability under normal operating conditions. Two kinds of methods, degradation path models and stochastic process models, are utilized to analyze degradation data and the latter one is the most popular method. However, some limitations like imprecise solution process and estimation result of degradation ratio still exist, which may affect the accuracy of the acceleration model and the extrapolation value. Moreover, the conducted solution of this problem, Bayesian method, lose key information when unifying the degradation data. In this paper, a new data processing and parameter inference method based on Bayesian method is proposed to handle degradation data and solve the problems above. First, Wiener process and acceleration model is chosen; Second, the initial values of degradation model and parameters of prior and posterior distribution under each level is calculated with updating and iteration of estimation values; Third, the lifetime and reliability values are estimated on the basis of the estimation parameters; Finally, a case study is provided to demonstrate the validity of the proposed method. The results illustrate that the proposed method is quite effective and accuracy in estimating the lifetime and reliability of a product.

  14. OTTER: An Optimized Transit Tool And Easy Reference

    Science.gov (United States)

    2016-03-01

    TRANSIT TOOL AND EASY REFERENCE Warren Korban Blackburn Lieutenant Commander, United States Navy B.A., Thomas Edison State College, 2003...B.S.A.S.T., Thomas Edison State College, 2004 Submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN...application. Each of these technologies adds to the efficiency of the fleet. As RADM Thomas Eccles said, “No single technology will enable the Navy to

  15. Active halo control through narrow-band excitation with the ADT at injection

    CERN Document Server

    Wagner, Joschka; Garcia Morales, Hector; Redaelli, Stefano; Valentino, Gianluca; Valuch, Daniel; CERN. Geneva. ATS Department

    2016-01-01

    During this MD (MD1388), the capabilities of an active halo control for beam tail depletion in the LHC were tested. The studied method relies on using the Transverse Damper (ADT) to perform a narrow-band excitation.

  16. Software reference for SaTool - a Tool for Structural Analysis of Automated Systems

    DEFF Research Database (Denmark)

    Lorentzen, Torsten; Blanke, Mogens

    2004-01-01

    This software reference details the functions of SaTool – a tool for structural analysis of technical systems. SaTool is intended used as part of an industrial systems design cycle. Structural analysis is a graph-based technique where principal relations between variables express the system’s...... of the graph. SaTool makes analysis of the structure graph to provide knowledge about fundamental properties of the system in normal and faulty conditions. Salient features of SaTool include rapid analysis of possibility to diagnose faults and ability to make autonomous recovery should faults occur........ The list of such variables and functional relations constitute the system’s structure graph. Normal operation means all functional relations are intact. Should faults occur, one or more functional relations cease to be valid. In a structure graph, this is seen as the disappearance of one or more nodes...

  17. Cognitive decline in prostate cancer patients undergoing ADT: a potential role for exercise training.

    Science.gov (United States)

    Mundell, Niamh L; Daly, Robin M; Macpherson, Helen; Fraser, Steve F

    2017-04-01

    Androgen deprivation therapy (ADT) is an effective and widely prescribed treatment for prostate cancer (PCa), but it is associated with multiple treatment-induced adverse effects that impact on various musculoskeletal and cardiometabolic health outcomes. Emerging research has shown that ADT is also associated with cognitive impairment, which has been linked to a loss of independence, increased falls and fracture risk and greater use of medical services. The aim of this review is to outline the evidence related to the effect of ADT use on cognitive function, and propose a role for exercise training as part of usual care to prevent and/or manage cognitive impairments for PCa survivors on ADT. The following results have been obtained from this study. ADT has been shown to adversely affect specific cognitive domains, particularly verbal memory, visuomotor function, attention and executive function. However, current clinical guidelines do not recommend routine assessment of cognitive function in these men. No studies have examined whether exercise training can preserve or improve cognitive function in these men, but in healthy adults', multimodal exercise training incorporating aerobic training, progressive resistance training (PRT) and challenging motor control exercises have the potential to attenuate cognitive decline. In conclusion, as treatment with ADT for men with PCa has been associated with a decline in cognition, it is recommended that cognitive function be routinely monitored in these men and that regular exercise training be prescribed to preserve (or improve) cognitive function. Assessment of cognition and individualised exercise training should be considered in the usual treatment plan of PCa patients receiving ADT. © 2017 Society for Endocrinology.

  18. The Web as a Reference Tool: Comparisons with Traditional Sources.

    Science.gov (United States)

    Janes, Joseph; McClure, Charles R.

    1999-01-01

    This preliminary study suggests that the same level of timeliness and accuracy can be obtained for answers to reference questions using resources in freely available World Wide Web sites as with traditional print-based resources. Discusses implications for library collection development, new models of consortia, training needs, and costing and…

  19. Reference and control plots – a useful tool for forestry?

    Directory of Open Access Journals (Sweden)

    Wójcicki Adam

    2017-06-01

    Full Text Available In the current age, the increased need for the restoration of forest ecosystems necessitates a better understanding of natural processes. Forest stands that are affected only by natural processes and disturbances can serve as references and controls for comparison with cut or otherwise managed forests. Such a comparison may help us determine, whether our sylvicultural practices actually pursue the goal of sustainable development. It is also important to use uniform terminology across the world to facilitate sharing of experiences and results. Creating reference and control stands in every ecoregion will provide a rich scientific basis for comparison with managed forests and allow us to design and apply restoration methods more effectively.

  20. The Academic Diligence Task (ADT): Assessing Individual Differences in Effort on Tedious but Important Schoolwork

    OpenAIRE

    Galla, Brian M.; Plummer, Benjamin D.; White, Rachel E.; Meketon, David; D’Mello, Sidney K.; Duckworth, Angela L.

    2014-01-01

    The current study reports on the development and validation of the Academic Diligence Task (ADT), designed to assess the tendency to expend effort on academic tasks which are tedious in the moment but valued in the long-term. In this novel online task, students allocate their time between solving simple math problems (framed as beneficial for problem solving skills) and, alternatively, playing Tetris or watching entertaining videos. Using a large sample of high school seniors (N = 921), the A...

  1. The Academic Diligence Task (ADT): Assessing Individual Differences in Effort on Tedious but Important Schoolwork.

    Science.gov (United States)

    Galla, Brian M; Plummer, Benjamin D; White, Rachel E; Meketon, David; D'Mello, Sidney K; Duckworth, Angela L

    2014-10-01

    The current study reports on the development and validation of the Academic Diligence Task (ADT), designed to assess the tendency to expend effort on academic tasks which are tedious in the moment but valued in the long-term. In this novel online task, students allocate their time between solving simple math problems (framed as beneficial for problem solving skills) and, alternatively, playing Tetris or watching entertaining videos. Using a large sample of high school seniors ( N = 921), the ADT demonstrated convergent validity with self-report ratings of Big Five conscientiousness and its facets, self-control and grit, as well as discriminant validity from theoretically unrelated constructs, such as Big Five extraversion, openness, and emotional stability, test anxiety, life satisfaction, and positive and negative affect. The ADT also demonstrated incremental predictive validity for objectively measured GPA, standardized math and reading achievement test scores, high school graduation, and college enrollment, over and beyond demographics and intelligence. Collectively, findings suggest the feasibility of online behavioral measures to assess noncognitive individual differences that predict academic outcomes.

  2. Oh! Web 2.0, Virtual Reference Service 2.0, Tools & Techniques (II)

    Science.gov (United States)

    Arya, Harsh Bardhan; Mishra, J. K.

    2012-01-01

    The paper describes the theory and definition of the practice of librarianship, specifically addressing how Web 2.0 technologies (tools) such as synchronous messaging, collaborative reference service and streaming media, blogs, wikis, social networks, social bookmarking tools, tagging, RSS feeds, and mashups might intimate changes and how…

  3. Delivering Electronic Resources with Web OPACs and Other Web-based Tools: Needs of Reference Librarians.

    Science.gov (United States)

    Bordeianu, Sever; Carter, Christina E.; Dennis, Nancy K.

    2000-01-01

    Describes Web-based online public access catalogs (Web OPACs) and other Web-based tools as gateway methods for providing access to library collections. Addresses solutions for overcoming barriers to information, such as through the implementation of proxy servers and other authentication tools for remote users. (Contains 18 references.)…

  4. Towards a Reference Architecture to Provision Tools as a Service for Global Software Development

    DEFF Research Database (Denmark)

    Chauhan, Aufeef; Babar, Muhammad Ali

    2014-01-01

    Organizations involve in Global Software Development (GSD) face challenges in terms of having access to appropriate set of tools for performing distributed engineering and development activities, integration between heterogeneous desktop and web-based tools, management of artifacts developed...... distributed environment. In this paper, we argue the need to have a cloud-enabled platform for supporting GSD and propose reference architecture of a cloud based Platform for providing support to provision ecosystem of the Tools as a Service (PTaaS)....

  5. A Reference Architecture for a Cloud-Based Tools as a Service Workspace

    DEFF Research Database (Denmark)

    Chauhan, Aufeef; Babar, Muhammad Ali; Sheng, Quan Z.

    2015-01-01

    Software Architecture (SA) plays a critical role in developing and evolving cloud-based applications. We present a Reference Architecture (RA) for designing Cloud-based Tools as a service work SPACE (TSPACE) - a platform for provisioning chain of tools following the Software as a Service (SaaS...... evaluate the RA in terms of completeness and feasibility. Our proposed RA can provide valuable guidance and insights for designing and implementing concrete software architectures of TSPACE....

  6. The Influence of Reference Corpus Size on Wordsmith Tools Keywords Extraction

    Directory of Open Access Journals (Sweden)

    Tony Berber Sardinha

    2012-05-01

    Full Text Available A KeyWords analysis (using WordSmith Tools enables the discovery of lexical items which reveal the main lexical sets in a text or corpus. Such an analysis requires that a reference corpus be compared to the corpus the researcher intends to describe (the study corpus. This paper presents a mathematical method for finding out the influence of reference corpus size on the number of key words extracted by the program. The results reveal that a reference corpus that is at least five times as large as the study corpus allows for drawing an amount of key words that is statistically equivalent to larger reference corpora, thus suggesting five times (as larger as the study corpora as the minimum order of magnitude for reference corpora.

  7. Audit of the referred patients to a tertiary centre: a tool for need ...

    African Journals Online (AJOL)

    Audit of the referred patients to a tertiary centre: a tool for need assessment. ... Open Access DOWNLOAD FULL TEXT ... There was no statistical significance between fetal and maternal outcome and the source of referral (P> 0.05). The reason ...

  8. Nouns referring to tools and natural objects differentially modulate the motor system.

    Science.gov (United States)

    Gough, Patricia M; Riggio, Lucia; Chersi, Fabian; Sato, Marc; Fogassi, Leonardo; Buccino, Giovanni

    2012-01-01

    While increasing evidence points to a critical role for the motor system in language processing, the focus of previous work has been on the linguistic category of verbs. Here we tested whether nouns are effective in modulating the motor system and further whether different kinds of nouns - those referring to artifacts or natural items, and items that are graspable or ungraspable - would differentially modulate the system. A Transcranial Magnetic Stimulation (TMS) study was carried out to compare modulation of the motor system when subjects read nouns referring to objects which are Artificial or Natural and which are Graspable or Ungraspable. TMS was applied to the primary motor cortex representation of the first dorsal interosseous (FDI) muscle of the right hand at 150 ms after noun presentation. Analyses of Motor Evoked Potentials (MEPs) revealed that across the duration of the task, nouns referring to graspable artifacts (tools) were associated with significantly greater MEP areas. Analyses of the initial presentation of items revealed a main effect of graspability. The findings are in line with an embodied view of nouns, with MEP measures modulated according to whether nouns referred to natural objects or artifacts (tools), confirming tools as a special class of items in motor terms. Additionally our data support a difference for graspable versus non graspable objects, an effect which for natural objects is restricted to initial presentation of items. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. Technology and Career Preparation: Using Virtual Interview Recordings (VIRs) in an Apparel, Design, and Textiles (ADT) Professional Seminar Course

    Science.gov (United States)

    Eike, Rachel J.; Rowell, Amy; Mihuta, Tiffani

    2016-01-01

    The purpose of this study was to identify key virtual-recorded interview (VIR) skills that are essential to Apparel, Design, and Textile (ADT) student performance. The virtual, computer-recording interview platform, InterviewStream, was used as the data collection instrument in this qualitative, exploratory case study. Virtual interviews have been…

  10. Decision support systems in nuclear emergencies: harmonizing domestic and reference tools

    International Nuclear Information System (INIS)

    Vamanu, D.; Mateescu, Gh.; Berinde, A.; Slavnicu, D.; Acasandrei, V.; Slavnicu, E.

    2001-01-01

    The paper addresses the issue of securing the compatibility and inter-operability of computer packages designed to perform as decision support tools in the management of radiological emergencies, over the transition times towards the implementation and uniform acceptance and uniform acceptance of internationally-shared reference tools such as the European Union's RODOS (Real Time On-Line Decision Support System for Off-Site Nuclear Emergencies in Europe). One submits that a harmonization between the currently operational, domestic, and the reference tool can be contemplated, based on extensive code comparison and benchmarking. A case in point is presented, paralleling selected RODOS applications on simulated abnormal nuclear events, and the concurrent application of a resident software package, NOTEPAD, developed to emulate RODOS-wise function at IFIH-HH Bucharest. The reproducible similarity may make domestic decision support system (DSS) facilities useful as both practical tools and factors promoting the emergency preparedness awareness, during the interim time laps till the full development and deployment of RODOS as a reference DSS in Europe. (authors)

  11. LEMONS - A Tool for the Identification of Splice Junctions in Transcriptomes of Organisms Lacking Reference Genomes.

    Directory of Open Access Journals (Sweden)

    Liron Levin

    Full Text Available RNA-seq is becoming a preferred tool for genomics studies of model and non-model organisms. However, DNA-based analysis of organisms lacking sequenced genomes cannot rely on RNA-seq data alone to isolate most genes of interest, as DNA codes both exons and introns. With this in mind, we designed a novel tool, LEMONS, that exploits the evolutionary conservation of both exon/intron boundary positions and splice junction recognition signals to produce high throughput splice-junction predictions in the absence of a reference genome. When tested on multiple annotated vertebrate mRNA data, LEMONS accurately identified 87% (average of the splice-junctions. LEMONS was then applied to our updated Mediterranean chameleon transcriptome, which lacks a reference genome, and predicted a total of 90,820 exon-exon junctions. We experimentally verified these splice-junction predictions by amplifying and sequencing twenty randomly selected genes from chameleon DNA templates. Exons and introns were detected in 19 of 20 of the positions predicted by LEMONS. To the best of our knowledge, LEMONS is currently the only experimentally verified tool that can accurately predict splice-junctions in organisms that lack a reference genome.

  12. A Reference Architecture for Providing Tools as a Service to Support Global Software Development

    DEFF Research Database (Denmark)

    Chauhan, Aufeef

    2014-01-01

    -computing paradigm for addressing above-mentioned issues by providing a framework to select appropriate tools as well as associated services and reference architecture of the cloud-enabled middleware platform that allows on demand provisioning of software engineering Tools as a Service (TaaS) with focus......Global Software Development (GSD) teams encounter challenges that are associated with distribution of software development activities across multiple geographic regions. The limited support for performing collaborative development and engineering activities and lack of sufficient support......-based solutions. The restricted ability of the organizations to have desired alignment of tools with software engineering and development processes results in administrative and managerial overhead that incur increased development cost and poor product quality. Moreover, stakeholders involved in the projects have...

  13. A Process Framework for Designing Software Reference Architectures for Providing Tools as a Service

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef; Babar, Muhammad Ali; Probst, Christian W.

    2016-01-01

    of software systems need customized and systematic SRA design and evaluation methods. In this paper, we present a software Reference Architecture Design process Framework (RADeF) that can be used for analysis, design and evaluation of the SRA for provisioning of Tools as a Service as part of a cloud......Software Reference Architecture (SRA), which is a generic architecture solution for a specific type of software systems, provides foundation for the design of concrete architectures in terms of architecture design guidelines and architecture elements. The complexity and size of certain types......-enabled workSPACE (TSPACE). The framework is based on the state of the art results from literature and our experiences with designing software architectures for cloud-based systems. We have applied RADeF SRA design two types of TSPACE: software architecting TSPACE and software implementation TSPACE...

  14. A biological tool to assess flow connectivity in reference temporary streams from the Mediterranean Basin

    Energy Technology Data Exchange (ETDEWEB)

    Cid, N., E-mail: ncid@ub.edu [Grup de Recerca “Freshwater Ecology and Management (FEM)”, Departament d' Ecologia, Universitat de Barcelona, Catalonia (Spain); Verkaik, I. [Grup de Recerca “Freshwater Ecology and Management (FEM)”, Departament d' Ecologia, Universitat de Barcelona, Catalonia (Spain); García-Roger, E.M. [Grup de Recerca “Freshwater Ecology and Management (FEM)”, Departament d' Ecologia, Universitat de Barcelona, Catalonia (Spain); Institut Cavanilles de Biodiversitat i Biologia Evolutiva, Universitat de València (Spain); Rieradevall, M.; Bonada, N. [Grup de Recerca “Freshwater Ecology and Management (FEM)”, Departament d' Ecologia, Universitat de Barcelona, Catalonia (Spain); Sánchez-Montoya, M.M. [Department of Ecology and Hydrology, Regional Campus of International Excellence “Campus Mare Nostrum”—University of Murcia (Spain); Leibniz-Institute of Freshwater Ecology and Inland Fisheries (IGB), Berlin (Germany); Gómez, R.; Suárez, M.L.; Vidal-Abarca, M.R. [Department of Ecology and Hydrology, Regional Campus of International Excellence “Campus Mare Nostrum”—University of Murcia (Spain); Demartini, D.; Buffagni, A.; Erba, S. [Instituto di Ricerca Sulle Acque (CNR-IRSA) (Italy); Karaouzas, I.; Skoulikidis, N. [Hellenic Center for Marine Research (HCMR) (Greece); Prat, N. [Grup de Recerca “Freshwater Ecology and Management (FEM)”, Departament d' Ecologia, Universitat de Barcelona, Catalonia (Spain)

    2016-01-01

    Many streams in the Mediterranean Basin have temporary flow regimes. While timing for seasonal drought is predictable, they undergo strong inter-annual variability in flow intensity. This high hydrological variability and associated ecological responses challenge the ecological status assessment of temporary streams, particularly when setting reference conditions. This study examined the effects of flow connectivity in aquatic macroinvertebrates from seven reference temporary streams across the Mediterranean Basin where hydrological variability and flow conditions are well studied. We tested for the effect of flow cessation on two streamflow indices and on community composition, and, by performing random forest and classification tree analyses we identified important biological predictors for classifying the aquatic state either as flowing or disconnected pools. Flow cessation was critical for one of the streamflow indices studied and for community composition. Macroinvertebrate families found to be important for classifying the aquatic state were Hydrophilidae, Simuliidae, Hydropsychidae, Planorbiidae, Heptageniidae and Gerridae. For biological traits, trait categories associated to feeding habits, food, locomotion and substrate relation were the most important and provided more accurate predictions compared to taxonomy. A combination of selected metrics and associated thresholds based on the most important biological predictors (i.e. Bio-AS Tool) were proposed in order to assess the aquatic state in reference temporary streams, especially in the absence of hydrological data. Although further development is needed, the tool can be of particular interest for monitoring, restoration, and conservation purposes, representing an important step towards an adequate management of temporary rivers not only in the Mediterranean Basin but also in other regions vulnerable to the effects of climate change. - Highlights: • The effect of flow connectivity on macroinvertebrate

  15. Introducing LIR (Lithotheque Ireland, a reference collection of flaked stone tool raw materials from Ireland

    Directory of Open Access Journals (Sweden)

    Killian Driscoll

    2016-09-01

    Full Text Available The LIR (Lithotheque Ireland reference collection of flaked stone tool raw materials from Ireland began in 2013, and is based on the geological prospection from two projects. The first (2013-2015 focused attention primarily on Carboniferous cherts from the northwest of Ireland, collecting 405 samples. The second (2015-2017 is currently collecting samples of the Cretaceous flint primarily from in situ contexts in the northeast of Ireland, but also includes beach surveys of Cretaceous flint from around the island; the first phase of geological prospection in Autumn 2015 collected 239 samples, with the geological prospection continuing in 2016. Therefore, to date the collection contains over 600 hand samples of chert and flint, along with a small number of other materials (siliceous limestone, tuff, mudstone. The physical reference collection is housed at the UCD School of Archaeology, University College Dublin and contains the geological hand samples along with the various thin sections of the samples that are used for petrographic analysis. The physical collection is complemented by an online database that is to be used alongside the physical collection, or can be used as a stand-alone resource. This paper provides an overview of the database’s metadata and the processes of data entry and editing, to serve as a reference point for the database and the fieldwork undertaken to date, and to serve as a template for other researchers undertaking similar work on lithic reference collections.

  16. Decision support systems in nuclear emergencies: A scenario-based comparison of domestic and reference tools

    International Nuclear Information System (INIS)

    Vamanu, D.; Slavnicu, S. D.; Slavnicu, E.; Vamanu, B.

    2004-01-01

    The article reports selective results of a comparison between RODOS - an emerging decision support system for the management of nuclear emergencies in Europe developed by an international research consortium under EEC aegis, and a resident software package developed and maintained for similar purposes at IFIN-HH, Bucharest. Reproducible similarity patterns obtained in the output data distributions provide for simple normalising procedures that may ensure convergent radiological assessments. When properly consolidated on a sufficient scenario casuistry, such procedures could lend a certain resilience to domestic decision support tools over the interim lead time required by the full implementation of RODOS, or other major league, internationally accepted reference systems. (authors)

  17. Anthropometry as a tool for measuring malnutrition: impact of the new WHO growth standards and reference.

    Science.gov (United States)

    Duggan, M B

    2010-01-01

    Anthropometry is a useful tool, both for monitoring growth and for nutritional assessment. The publication by WHO of internationally agreed growth standards in 1983 facilitated comparative nutritional assessment and the grading of childhood malnutrition. New growth standards for children under 5 years and growth reference for children aged 5-19 years have recently (2006 and 2007) been published by WHO. Growth of children growth reference study involving children from six countries, selected for optimal child-rearing practices (breastfeeding, non-smoking mothers). They therefore constitute a growth standard. Growth data for older children were drawn from existing US studies, and upward skewing was avoided by excluding overweight subjects. These constitute a reference. More indicators are now included to describe optimal early childhood growth and development, e.g. BMI for age and MUAC for age. The growth reference for older children (2007) focuses on linear growth and BMI; weight-for-age data are age-limited and weight-for-height is omitted. Differences in the 2006 growth pattern from the previous reference for children toddler. The spread of values for height and weight for height is narrower in the 2006 dataset, such that the lower limit of the normal range for both indices is set higher than in the previous dataset. This means that a child will be identified as moderately or severely underweight for height (severe acute malnutrition) at a greater weight for height than previously. The implications for services for malnourished children have been recognised and strategies devised. The emphasis on BMI-for-age as the indicator for thinness and obesity in older children is discussed. The complexity of calculations for health cadres without mathematical backgrounds or access to calculation software is also an issue. It is possible that the required charts and tables may not be accessible to those working in traditional health/nutrition services which are often poorly

  18. A biological tool to assess flow connectivity in reference temporary streams from the Mediterranean Basin.

    Science.gov (United States)

    Cid, N; Verkaik, I; García-Roger, E M; Rieradevall, M; Bonada, N; Sánchez-Montoya, M M; Gómez, R; Suárez, M L; Vidal-Abarca, M R; Demartini, D; Buffagni, A; Erba, S; Karaouzas, I; Skoulikidis, N; Prat, N

    2016-01-01

    Many streams in the Mediterranean Basin have temporary flow regimes. While timing for seasonal drought is predictable, they undergo strong inter-annual variability in flow intensity. This high hydrological variability and associated ecological responses challenge the ecological status assessment of temporary streams, particularly when setting reference conditions. This study examined the effects of flow connectivity in aquatic macroinvertebrates from seven reference temporary streams across the Mediterranean Basin where hydrological variability and flow conditions are well studied. We tested for the effect of flow cessation on two streamflow indices and on community composition, and, by performing random forest and classification tree analyses we identified important biological predictors for classifying the aquatic state either as flowing or disconnected pools. Flow cessation was critical for one of the streamflow indices studied and for community composition. Macroinvertebrate families found to be important for classifying the aquatic state were Hydrophilidae, Simuliidae, Hydropsychidae, Planorbiidae, Heptageniidae and Gerridae. For biological traits, trait categories associated to feeding habits, food, locomotion and substrate relation were the most important and provided more accurate predictions compared to taxonomy. A combination of selected metrics and associated thresholds based on the most important biological predictors (i.e. Bio-AS Tool) were proposed in order to assess the aquatic state in reference temporary streams, especially in the absence of hydrological data. Although further development is needed, the tool can be of particular interest for monitoring, restoration, and conservation purposes, representing an important step towards an adequate management of temporary rivers not only in the Mediterranean Basin but also in other regions vulnerable to the effects of climate change. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Google Sets, Google Suggest, and Google Search History: Three More Tools for the Reference Librarian's Bag of Tricks

    OpenAIRE

    Cirasella, Jill

    2008-01-01

    This article examines the features, quirks, and uses of Google Sets, Google Suggest, and Google Search History and argues that these three lesser-known Google tools warrant inclusion in the resourceful reference librarian’s bag of tricks.

  20. A Reference Architecture for Provisioning of Tools as a Service: Meta-Model, Ontologies and Design Elements

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef; Babar, Muhammad Ali; Sheng, Quan Z.

    2016-01-01

    Software Architecture (SA) plays a critical role in designing, developing and evolving cloud-based platforms that can be used to provision different types of services to consumers on demand. In this paper, we present a Reference Architecture (RA) for designing cloud-based Tools as a service SPACE...... (TSPACE) for provisioning a bundled suite of tools by following the Software as a Service (SaaS) model. The reference architecture has been designed by leveraging information structuring approaches and by using well-known architecture design principles and patterns. The RA has been documented using view...

  1. Extension of an Object-Oriented Optimization Tool: User's Reference Manual

    Science.gov (United States)

    Pak, Chan-Gi; Truong, Samson S.

    2015-01-01

    The National Aeronautics and Space Administration Armstrong Flight Research Center has developed a cost-effective and flexible object-oriented optimization (O (sup 3)) tool that leverages existing tools and practices and allows easy integration and adoption of new state-of-the-art software. This object-oriented framework can integrate the analysis codes for multiple disciplines, as opposed to relying on one code to perform analysis for all disciplines. Optimization can thus take place within each discipline module, or in a loop between the O (sup 3) tool and the discipline modules, or both. Six different sample mathematical problems are presented to demonstrate the performance of the O (sup 3) tool. Instructions for preparing input data for the O (sup 3) tool are detailed in this user's manual.

  2. Reference Tools for Data Processing, Office Automation, and Data Communications: An Introductory Guide.

    Science.gov (United States)

    Cupoli, Patricia Dymkar

    1981-01-01

    Provides an introduction to various reference sources which are useful in dealing with the areas of data processing, office automation, and communications technologies. A bibliography with vendor listings is included. (FM)

  3. Critical care providers refer to information tools less during communication tasks after a critical care clinical information system introduction.

    Science.gov (United States)

    Ballermann, Mark; Shaw, Nicola T; Mayes, Damon C; Gibney, R T Noel

    2011-01-01

    Electronic documentation methods may assist critical care providers with information management tasks in Intensive Care Units (ICUs). We conducted a quasi-experimental observational study to investigate patterns of information tool use by ICU physicians, nurses, and respiratory therapists during verbal communication tasks. Critical care providers used tools less at 3 months after the CCIS introduction. At 12 months, care providers referred to paper and permanent records, especially during shift changes. The results suggest potential areas of improvement for clinical information systems in assisting critical care providers in ensuring informational continuity around their patients.

  4. Laboratory quality stepwise implementation tool: National reference TB laboratory of Iran

    OpenAIRE

    Ali Naghi Kebriaee; Donya Malekshahian; Mojtaba Ahmadi; Parissa Farnia

    2015-01-01

    Background and objective: During recent years, the World Health Organization (WHO) proposed new software for improving the tuberculosis (TB) laboratory services. The protocol is known as “quality stepwise implementation tool” and is based on enforcement of quality assurance services through accreditation by the International Organization for Standardization (ISO) 15189. As a national reference TB laboratory (NRL) of Iran, the benefit and challenges of implementing this standard were analyzed....

  5. Sport concussion assessment tool-Third edition normative reference values for professional Rugby Union players.

    Science.gov (United States)

    Fuller, G W; Govind, O; Tucker, R; Raftery, M

    2018-04-01

    To establish normative reference data for the SCAT3 in professional Rugby Union players. A cross sectional study in professional Rugby Union players competing in national and international professional competitions between 2015 and 2016. The SCAT3 was administered pre-season or prior to tournaments. Data was collected electronically using a custom tablet application. SCAT3 subcomponents distributions were described and normative ranges determined using percentile cut-offs for average, unusually low/high, and extremely low/high scores. The association between player characteristics and performance in SCAT3 subcomponents was also investigated in exploratory analyses. A total of 3611 professional Rugby Union players were included. The most common baseline symptom was fatigue (14%). The symptom score median (md) was 0 (interquartile range (IQR)=0-1). Symptom severity md was 0 (IQR=0-1). The md of the SAC score was 28 (IQR=26-29). The md of the MBESS was 2 (IQR=0-4). The Tandem gait md was 11.1s (IQR=10.0-12.7s). Upper limb coordination was normal in 98.4%. Younger age and lower educational level were associated with worse performance on delayed recall and reverse month sub-components of the SCAT3 (pRugby Union players are provided. Baseline performance on concentration and delayed recall tests may be lower in younger athletes or in those with lower educational level. Copyright © 2017. Published by Elsevier Ltd.

  6. Spectroscopy applied to feed additives of the European Union Reference Laboratory: a valuable tool for traceability.

    Science.gov (United States)

    Omar, Jone; Slowikowski, Boleslaw; Boix, Ana; von Holst, Christoph

    2017-08-01

    Feed additives need to be authorised to be placed on the market according to Regulation (EU) No. 1831/2003. Next to laying down the procedural requirements, the regulation creates the European Union Reference Laboratory for Feed Additives (EURL-FA) and requires that applicants send samples to the EURL-FA. Once authorised, the characteristics of the marketed feed additives should correspond to those deposited in the sample bank of the EURL-FA. For this purpose, the submitted samples were subjected to near-infrared (NIR) and Raman spectroscopy for spectral characterisation. These techniques have the valuable potential of characterising the feed additives in a non-destructive manner without any complicated sample preparation. This paper describes the capability of spectroscopy for a rapid characterisation of products to establish whether specific authorisation criteria are met. This study is based on the analysis of feed additive samples from different categories and functional groups, namely products containing (1) selenium, (2) zinc and manganese, (3) vitamins and (4) essential oils such as oregano and thyme oil. The use of chemometrics turned out to be crucial, especially in cases where the differentiation of spectra by visual inspection was very difficult.

  7. Off-Shell ADT charges of five-dimensional Myers-Perry black holes%五维Myers-Perry黑洞的离壳ADT荷

    Institute of Scientific and Technical Information of China (English)

    安旭强; 景艺德; 彭俊金

    2018-01-01

    In this work,we have calculated the conserved charges,such as mass and angular momentum,of five-dimensional rotating Myers-Perry black holes via the off-shell generalized Abbott-DeserTekin (ADT) method.These conserved charges strictly satisfy the differential and integral forms of the first law for black holes.Moreover,we compare the off-shell ADT conserved charges with those via both the formalisms of the well-known ADM and Komar integral,finding that all the results are correspondingly identified with each other.%基于离壳推广的Abbott-Deser-Tekin (ADT)定义,给出了五维时空中双转动的Myers-Perry黑洞的离壳ADT质量与角动量等守恒荷.在此基础上,验证了这些守恒荷严格满足黑洞热力学第一定律的微分与积分形式.此外,通过离壳推广的ADT方法与ADM定义以及Komar公式的比较,我们发现,对于五维Myers-Perry黑洞来说,此3种方法给出的守恒荷完全一致.

  8. Leg length, sitting height, and body proportions references for achondroplasia: New tools for monitoring growth.

    Science.gov (United States)

    Del Pino, Mariana; Ramos Mejía, Rosario; Fano, Virginia

    2018-04-01

    Achondroplasia is the most common form of inherited disproportionate short stature. We report leg length, sitting height, and body proportion curves for achondroplasia. Seven centile format of sitting height, leg length, sitting height/leg length ratio, sitting height/height ratio, and head circumference/height ratio were estimated by the LMS method. The Q-test was applied to assess the goodness of fit. For comparison, centiles of sitting height and leg length were graphed using Argentine national growth references for achondroplasia and non-achondroplasia populations. The sample consisted of 342 children with achondroplasia (171 males, 171 females) aged 0-18 years. The median (interquartile range) number of measurements per child was 6 (3, 12) for sitting height and 8 (3, 13) for head circumference. Median leg length increased from 14 cm at age 1 week to 44 and 40 cm (males and females, respectively) in achondroplasia adolescents which is 3.5 cm shorter than non-achondroplasia children at age 1 week and, 38 cm shorter at adolescence. Median sitting height increased from 34 cm at birth to 86 and 81 in adolescents' boys and girls respectively, only 5 cm shorter than non-achondroplasia children. Sitting height/leg length decreased from 2.61 at birth to approximately 1.90 at adolescent. Median head circumference/height ratio decreased from 0.79 at birth to 0.46 at 18 years in both sexes. Growth of lower limbs is affected early in life and becomes more noticeable throughout childhood. The disharmonic growth between the less affected trunk and the severely affected limbs determine body disproportion in achondroplasia. © 2018 Wiley Periodicals, Inc.

  9. An approach and a tool for setting sustainable energy retrofitting strategies referring to the 2010 EP

    Directory of Open Access Journals (Sweden)

    Charlot-Valdieu, C.

    2011-10-01

    Full Text Available The 2010 EPBD asks for an economic and social analysis in order to preserve social equity and to promote innovation and building productivity. This is possible with a life cycle energy cost (LCEC analysis, such as with the SEC (Sustainable Energy Cost model whose bottom up approach begins with a building typology including inhabitants. Then the analysis of some representative buildings includes the identification of a technico-economical optimum and energy retrofitting scenarios for each retrofitting programme and the extrapolation for the whole building stock. An extrapolation for the whole building stock allows to set up the strategy and to identify the needed means for reaching the objectives. SEC is a decision aid tool for optimising sustainable energy retrofitting strategies for buildings at territorial and patrimonial scales inside a sustainable development approach towards the factor 4. Various versions of the SEC model are now available for housing and for tertiary buildings.

    La directiva europea de 2010 sobre eficiencia energética en los edificios exige un análisis económico y social con el objetivo de preservar la equidad social, promover la innovación y reforzar la productividad en la construcción. Esto es posible con el análisis del coste global ampliado y especialmente con el modelo SEC. El análisis “bottom up” realizado con la SEC se basa en una tipología de edificio/usuario y en el análisis de edificios representativos: la identificación del óptimo técnico-económico y elaboración de escenarios antes de hacer una extrapolación al conjunto del parque. SEC es una herramienta de ayuda a la decisión para desarrollar estrategias territoriales o patrimoniales de rehabilitación energética. Existen diversas versiones del modelo: para edificios residenciales (unifamiliares y plurifamiliares, públicos y privados y para edificios terciarios.

  10. Growth references

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    A growth reference describes the variation of an anthropometric measurement within a group of individuals. A reference is a tool for grouping and analyzing data and provides a common basis for comparing populations.1 A well known type of reference is the age-conditional growth diagram. The

  11. A phase II trial of androgen deprivation therapy (ADT) plus chemotherapy as initial treatment for local failures or advanced prostate cancer.

    Science.gov (United States)

    Amato, Robert; Stepankiw, Mika; Gonzales, Patricia

    2013-06-01

    Long-term hormonal ablation in prostate cancer is associated with decreased overall health and quality of life. Few reports emphasized the role of chemotherapy in the management of early stage prostate cancer. This study analyzed the safety and efficacy of androgen deprivation therapy (ADT) plus chemotherapy as initial treatment for patients identified as local failures or not eligible for prostatectomy or radiation therapy due to advanced disease presentation. Enrolled patients received ADT in the form of leuprolide every 12 weeks for 24 months with bicalutamide initiating after the completion of chemotherapy. Chemotherapy consisted of ketoconazole and doxorubicin for weeks 1, 3, and 5 and estramustine and docetaxel and for weeks 2, 4 and 6. During weeks 7 and 8, no treatment was received. Forty-six patients were enrolled, and forty-five patients were evaluable. Median progression-free survival (PFS) was 23.4 months. Median overall survival (OS) was 53.7 months. Out of 45 patients with measurable disease, 22 patients had an objective response: 9 patients achieved a complete response; 2 patients achieved a partial response; 10 patients achieved stable disease. Frequent grade 3 adverse events included elevated ALT (17 %), hypokalemia (13 %), and hypophosphatemia (13 %). Grade 4 adverse events were rare and included low bicarbonate (2 %), hypokalemia (2 %), leukocytopenia (2 %), and neutropenia (2 %). The treatment demonstrated clinical benefit in all patient subsets with minimal reversible treatment-related adverse events. Subgroup analysis suggests that having prior local therapy resulted in greater PFS and OS.

  12. REFERENCE LEGAL SYSTEM “ConsultantPlus” AS A TOOL FOR IMPLEMENTING INTERDISCIPLINARY CONNECTIONS IN HIGH SCHOOL

    Directory of Open Access Journals (Sweden)

    Galina Viktorovna Hamer

    2017-12-01

    Full Text Available The standards for higher education provide for the development of students a comprehensive, universal, General and professional competencies through interdisciplinary connections. As practice shows, in the teaching of various disciplines, effective use of reference legal systems (RLS “ConsultantPlus”. Development opportunities RLS is an important component of training future specialists. It starts with the first courses of study in basic disciplines and should be used in the future during the period of training for regulatory support of various disciplines of specialization. Purpose Development and subsequent introduction in the educational process RLS “ConsultantPlus”as an effective tool for the realization of connections between disciplines. Methodology: used interactive teaching methods, and statistical methods of analysis of the impact of research. Results: improving the quality of study RLS “ConsultantPlus”, gain experience in solving actual practical problems, effective monitoring of students ‘ knowledge. Practical implications: developed by the technology study RLS “ConsultantPlus” should be used in University education in the study of various disciplines: legal, disciplines of information technology, statistical, special subjects to the effective development necessary to the future experts skills.

  13. Association between the Family Nutrition and Physical Activity Screening Tool and obesity severity in youth referred to weight management.

    Science.gov (United States)

    Tucker, Jared M; Howard, Kathleen; Guseman, Emily H; Yee, Kimbo E; Saturley, Heather; Eisenmann, Joey C

    The Family Nutrition and Physical Activity Screening Tool (FNPA) evaluates family behavioural and environmental factors associated with pediatric obesity, but it is unknown if FNPA scores differ among youth across obesity severities. Our aim was to determine the association between the FNPA and obesity severity in youth referred to weight management. Upon initiating treatment, height, weight, and the FNPA were collected according to standard procedures. Cut-points for overweight/obesity, severe obesity (SO) class 2, and SO class 3 were calculated. FNPA scores were compared across weight status groups using analysis of covariance, and odds of SO across FNPA quartiles were evaluated with multiple logistic regression. Participants included 564 5-18year old who initiated treatment and completed the FNPA. After adjustment, FNPA scores differed by weight status with higher/healthier scores in youth with overweight/obesity (56.6±8.5) when compared to those with SO class 2 (55.0±7.1; p=0.015) or SO class 3 (53.6±9.0; p<0.001). Compared to those in the highest FNPA quartile, youth in the 2nd quartile had 1.8 (95% CI: 1.1, 2.9) times higher odds of SO, and those in the lowest FNPA quartile had 2.1 (95% CI: 1.3, 3.4) times higher odds of SO. Youth with SO had unhealthier subscale scores among 6 of 10 constructs, including nutritional, physical activity, sedentary, and sleep behaviours. Results suggest a consistent inverse relationship between the FNPA and adiposity among youth presenting for weight management. The FNPA is a useful metric for programs and clinicians targeting family behaviours and the home environment to combat obesity. Copyright © 2016 Asia Oceania Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

  14. MSeqDR mvTool: A mitochondrial DNA Web and API resource for comprehensive variant annotation, universal nomenclature collation, and reference genome conversion.

    Science.gov (United States)

    Shen, Lishuang; Attimonelli, Marcella; Bai, Renkui; Lott, Marie T; Wallace, Douglas C; Falk, Marni J; Gai, Xiaowu

    2018-06-01

    Accurate mitochondrial DNA (mtDNA) variant annotation is essential for the clinical diagnosis of diverse human diseases. Substantial challenges to this process include the inconsistency in mtDNA nomenclatures, the existence of multiple reference genomes, and a lack of reference population frequency data. Clinicians need a simple bioinformatics tool that is user-friendly, and bioinformaticians need a powerful informatics resource for programmatic usage. Here, we report the development and functionality of the MSeqDR mtDNA Variant Tool set (mvTool), a one-stop mtDNA variant annotation and analysis Web service. mvTool is built upon the MSeqDR infrastructure (https://mseqdr.org), with contributions of expert curated data from MITOMAP (https://www.mitomap.org) and HmtDB (https://www.hmtdb.uniba.it/hmdb). mvTool supports all mtDNA nomenclatures, converts variants to standard rCRS- and HGVS-based nomenclatures, and annotates novel mtDNA variants. Besides generic annotations from dbNSFP and Variant Effect Predictor (VEP), mvTool provides allele frequencies in more than 47,000 germline mitogenomes, and disease and pathogenicity classifications from MSeqDR, Mitomap, HmtDB and ClinVar (Landrum et al., 2013). mvTools also provides mtDNA somatic variants annotations. "mvTool API" is implemented for programmatic access using inputs in VCF, HGVS, or classical mtDNA variant nomenclatures. The results are reported as hyperlinked html tables, JSON, Excel, and VCF formats. MSeqDR mvTool is freely accessible at https://mseqdr.org/mvtool.php. © 2018 Wiley Periodicals, Inc.

  15. Oh! Web 2.0, Virtual Reference Service 2.0, Tools and Techniques (I): A Basic Approach

    Science.gov (United States)

    Arya, Harsh Bardhan; Mishra, J. K.

    2011-01-01

    This study targets librarians and information professionals who use Web 2.0 tools and applications with a view to providing snapshots on how Web 2.0 technologies are used. It also aims to identify values and impact that such tools have exerted on libraries and their services, as well as to detect various issues associated with the implementation…

  16. Geographical information systems as a tool to explore land characteristics and land use : with reference to Costa Rica

    NARCIS (Netherlands)

    Stoorvogel, J.J.

    1995-01-01

    An adequate inventory of land characteristics and land use is increasingly necessary to support agricultural land use planning, especially in view of the conflicting demands on scarce land resources. Fortunately new tools like GIS are being developed and adapted to support these

  17. Digital immunohistochemistry wizard: image analysis-assisted stereology tool to produce reference data set for calibration and quality control.

    Science.gov (United States)

    Plancoulaine, Benoît; Laurinaviciene, Aida; Meskauskas, Raimundas; Baltrusaityte, Indra; Besusparis, Justinas; Herlin, Paulette; Laurinavicius, Arvydas

    2014-01-01

    Digital image analysis (DIA) enables better reproducibility of immunohistochemistry (IHC) studies. Nevertheless, accuracy of the DIA methods needs to be ensured, demanding production of reference data sets. We have reported on methodology to calibrate DIA for Ki67 IHC in breast cancer tissue based on reference data obtained by stereology grid count. To produce the reference data more efficiently, we propose digital IHC wizard generating initial cell marks to be verified by experts. Digital images of proliferation marker Ki67 IHC from 158 patients (one tissue microarray spot per patient) with an invasive ductal carcinoma of the breast were used. Manual data (mD) were obtained by marking Ki67-positive and negative tumour cells, using a stereological method for 2D object enumeration. DIA was used as an initial step in stereology grid count to generate the digital data (dD) marks by Aperio Genie and Nuclear algorithms. The dD were collected into XML files from the DIA markup images and overlaid on the original spots along with the stereology grid. The expert correction of the dD marks resulted in corrected data (cD). The percentages of Ki67 positive tumour cells per spot in the mD, dD, and cD sets were compared by single linear regression analysis. Efficiency of cD production was estimated based on manual editing effort. The percentage of Ki67-positive tumor cells was in very good agreement in the mD, dD, and cD sets: regression of cD from dD (R2=0.92) reflects the impact of the expert editing the dD as well as accuracy of the DIA used; regression of the cD from the mD (R2=0.94) represents the consistency of the DIA-assisted ground truth (cD) with the manual procedure. Nevertheless, the accuracy of detection of individual tumour cells was much lower: in average, 18 and 219 marks per spot were edited due to the Genie and Nuclear algorithm errors, respectively. The DIA-assisted cD production in our experiment saved approximately 2/3 of manual marking. Digital IHC wizard

  18. Reliability and Normative Reference Values for the Vestibular/Ocular Motor Screening (VOMS) Tool in Youth Athletes.

    Science.gov (United States)

    Moran, Ryan N; Covassin, Tracey; Elbin, R J; Gould, Dan; Nogle, Sally

    2018-05-01

    The Vestibular/Ocular Motor Screening (VOMS) measure is a newly developed vestibular and ocular motor symptom provocation screening tool for sport-related concussions. Baseline data, psychometric properties, and reliability of the VOMS are needed to further understand the applications of this tool, especially in the youth population, where research is scarce. To establish normative data and document the internal consistency and false-positive rate of the VOMS in a sample of nonconcussed youth athletes. Cross-sectional study; Level of evidence, 3. A total of 423 youth athletes (male = 278, female = 145) between the ages of 8 and 14 years completed baseline VOMS screening before the start of their respective sport seasons. Internal consistency was measured with Cronbach α and inter-item correlations. Approximately 60% of youth athletes reported no symptom provocation on baseline VOMS assessment, with 9% to 13% scoring over the cutoff levels (score of ≥2 for any individual VOMS symptom, near point convergence distance of ≥5 cm). The VOMS displayed a high internal consistency (Cronbach α = .97) at baseline among youth athletes. The current findings provide preliminary support for the implementation of VOMS baseline assessment into clinical practice, due to a high internal consistency, strong relationships between VOMS items, and a low false-positive rate at baseline in youth athletes.

  19. Efficient Integration of Old and New Research Tools for Automating the Identification and Analysis of Seismic Reference Events

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Robert; Rivers, Wilmer

    2005-01-25

    any single computer program for seismic data analysis will not have all the capabilities needed to study reference events, since hese detailed studies will be highly specialized. It may be necessary to develop and test new algorithms, and then these special ;odes must be integrated with existing software to use their conventional data-processing routines. We have investigated two neans of establishing communications between the legacy and new codes: CORBA and XML/SOAP Web services. We have nvestigated making new Java code communicate with a legacy C-language program, geotool, running under Linux. Both methods vere successful, but both were difficult to implement. C programs on UNIX/Linux are poorly supported for Web services, compared vith the Java and .NET languages and platforms. Easier-to-use middleware will be required for scientists to construct distributed applications as easily as stand-alone ones. Considerable difficulty was encountered in modifying geotool, and this problem shows he need to use component-based user interfaces instead of large C-language codes where changes to one part of the program nay introduce side effects into other parts. We have nevertheless made bug fixes and enhancements to that legacy program, but t remains difficult to expand it through communications with external software.

  20. Serum Inhibin B and follicle-stimulating hormone levels as tools in the evaluation of infertile men: significance of adequate reference values from proven fertile men

    DEFF Research Database (Denmark)

    Andersson, A.-M.; Petersen, Jørgen Holm; Jørgensen, N.

    2004-01-01

    Inhibin B and FSH levels in 289 idiopathic infertile men were compared with reference materials consisting of 303 proven fertile men (reference group 1) and 307 healthy men from the general population with unknown fertility status (reference group 2). The diagnostic power of these two serum markers...... of spermatogenesis was evaluated by the use of receiver operating characteristic plot analysis, and an example of how both markers can be used simultaneously in a bivariate reference chart is presented. Inhibin B levels were significantly lower and FSH levels were significantly higher in the infertile men, compared...

  1. Developing Programming Tools to Handle Traveling Salesman Problem by the Three Object-Oriented Languages

    Directory of Open Access Journals (Sweden)

    Hassan Ismkhan

    2014-01-01

    Full Text Available The traveling salesman problem (TSP is one of the most famous problems. Many applications and programming tools have been developed to handle TSP. However, it seems to be essential to provide easy programming tools according to state-of-the-art algorithms. Therefore, we have collected and programmed new easy tools by the three object-oriented languages. In this paper, we present ADT (abstract data type of developed tools at first; then we analyze their performance by experiments. We also design a hybrid genetic algorithm (HGA by developed tools. Experimental results show that the proposed HGA is comparable with the recent state-of-the-art applications.

  2. Java/JNI/C/Fortran makefile project for a Java plug-in and related Android app in Eclipse ADT bundle : A side-by-side comparison

    NARCIS (Netherlands)

    De Beer, R.; Van Ormondt, D.

    2015-01-01

    We have developed a Java/Fortran based application, called MonteCarlo, that enables the users can carry out Monte Carlo studies in the field of in vivo MRS. The application is supposed to be used as a tool for the jMRUI platform, being the in vivo MRS software system of the TRANSACT European Union

  3. Managing patients' wait time in specialist out-patient clinic using real-time data from existing queue management and ADT systems.

    Science.gov (United States)

    Ju, John Chen; Gan, Soon Ann; Tan Siew Wee, Justine; Huang Yuchi, Peter; Mei Mei, Chan; Wong Mei Mei, Sharon; Fong, Kam Weng

    2013-01-01

    In major cancer centers, heavy patients load and multiple registration stations could cause significant wait time, and can be result in patient complains. Real-time patient journey data and visual display are useful tools in hospital patient queue management. This paper demonstrates how we capture patient queue data without deploying any tracing devices; and how to convert data into useful patient journey information to understand where interventions are likely to be most effective. During our system development, remarkable effort has been spent on resolving data discrepancy and balancing between accuracy and system performances. A web-based dashboard to display real-time information and a framework for data analysis were also developed to facilitate our clinics' operation. Result shows our system could eliminate more than 95% of data capturing errors and has improved patient wait time data accuracy since it was deployed.

  4. Reference Genes for qPCR Analysis in Resin-Tapped Adult Slash Pine As a Tool to Address the Molecular Basis of Commercial Resinosis

    Directory of Open Access Journals (Sweden)

    Júlio C. de Lima

    2016-06-01

    Full Text Available Pine oleoresin is a major source of terpenes, consisting of turpentine (mono- and sesquiterpenes and rosin (diterpenes fractions. Higher oleoresin yields are of economic interest, since oleoresin derivatives make up a valuable source of materials for chemical industries. Oleoresin can be extracted from living trees, often by the bark streak method, in which bark removal is done periodically, followed by application of stimulant paste containing sulfuric acid and other chemicals on the freshly wounded exposed surface. To better understand the molecular basis of chemically-stimulated and wound induced oleoresin production, we evaluated the stability of 11 putative reference genes for the purpose of normalization in studying Pinus elliottii gene expression during oleoresinosis. Samples for RNA extraction were collected from field-grown adult trees under tapping operations using stimulant pastes with different compositions and at various time points after paste application. Statistical methods established by geNorm, NormFinder, and BestKeeper softwares were consistent in pointing as adequate reference genes HISTO3 and UBI. To confirm expression stability of the candidate reference genes, expression profiles of putative P. elliottii orthologs of resin biosynthesis-related genes encoding Pinus contorta β-pinene synthase [PcTPS-(−β-pin1], P. contorta levopimaradiene/abietadiene synthase (PcLAS1, Pinus taeda α-pinene synthase [PtTPS-(+αpin], and P. taeda α-farnesene synthase (PtαFS were examined following stimulant paste application. Increased oleoresin yields observed in stimulated treatments using phytohormone-based pastes were consistent with higher expression of pinene synthases. Overall, the expression of all genes examined matched the expected profiles of oleoresin-related transcript changes reported for previously examined conifers.

  5. Preset pivotal tool holder

    Science.gov (United States)

    Asmanes, Charles

    1979-01-01

    A tool fixture is provided for precise pre-alignment of a radiused edge cutting tool in a tool holder relative to a fixed reference pivot point established on said holder about which the tool holder may be selectively pivoted relative to the fixture base member to change the contact point of the tool cutting edge with a workpiece while maintaining the precise same tool cutting radius relative to the reference pivot point.

  6. Coastwide Reference Monitoring System (CRMS) Vegetation Volume Index: An assessment tool for marsh habitat focused on the three-dimensional structure at CRMS vegetation monitoring stations

    Science.gov (United States)

    Wood, William B.; Visser, Jenneke M.; Piazza, Sarai C.; Sharp, Leigh A.; Hundy, Laura C.; McGinnis, Tommy E.

    2015-12-04

    A Vegetation Volume (VV) variable and Vegetation Volume Index (VVI) have been developed for the Coastwide Reference Monitoring System (CRMS). The VV is a measure of the amount of three-dimensional vegetative structure present at each CRMS site and is based on vegetation data collected annually. The VV uses 10 stations per CRMS site to quantify four vegetation layers: carpet, herbaceous, shrub, and tree. For each layer an overall live vegetation percent cover and height are collected to create a layer volume; the individual layer volumes are then summed to generate a site vegetation volume profile. The VV uses the two-dimensional area of live vegetative cover (in square meters) multiplied by the height (in meters) of each layer to produce a volume (in cubic meters) for each layer present in a 2-meter by 2-meter station. These layers are additive, yielding a total volume for each of the 10 herbaceous vegetation stations and an overall CRMS marsh site average.

  7. "EWS Matrix" and "EWG Matrix": "De-sign for All" tools referred to the development of a enabling communication system for public spaces.

    Science.gov (United States)

    Di Bucchianico, Giuseppe; Camplone, Stefania; Picciani, Stefano; Vallese, Valeria

    2012-01-01

    The widespread sense of spatial disorientation that can be experienced in many public places (buildings and open spaces),generally depends on a design approach that doesn't take into account both the "communication skills" of the different parts of the spatial organization, both the variability of people and their ways of interacting with environments, orienteering themselves. Nevertheless, "not find the way" often has some obvious practical costs (loss of time, failure to achieve a target) and some more intangible, but no less important, emotional costs. That's why the design of signage systems must take into account both the specificities of places and the extreme variability of its users. The paper presents the results of a study on this specific issue. In particular, the study focuses on the description of some tools useful for the analysis and design of a signage system that is truly "for All".

  8. [Reference citation].

    Science.gov (United States)

    Brkić, Silvija

    2013-01-01

    Scientific and professional papers represent the information basis for scientific research and professional work. References important for the paper should be cited within the text, and listed at the end of the paper. This paper deals with different styles of reference citation. Special emphasis was placed on the Vancouver Style for reference citation in biomedical journals established by the International Committee of Medical Journal Editors. It includes original samples for citing various types of articles, both printed and electronic, as well as recommendations related to reference citation in accordance with the methodology and ethics of scientific research and guidelines for preparing manuscripts for publication.

  9. The establishment of local diagnostic reference levels in endoscopic retrograde cholangiopancreatography: a practical tool for the optimisation and for quality assurance management

    International Nuclear Information System (INIS)

    Saukko, E.; Henner, A.; Nieminen, M.T.; Ahonen, S.-M.

    2017-01-01

    Fluoroscopic procedures are an area of special concern in relation to radiation protection. The aim of this study was to describe the current level of patient radiation doses in endoscopic retrograde cholangiopancreatography (ERCP) collected from a single centre, as well as to establish and review local diagnostic reference levels (DRLs) in ERCP. A total of 100 patients' radiation doses in ERCP were recorded, and the third-quartile method was adopted to establish local DRLs for ERCP. The mean dose area product (DAP) was 2.05 Gy cm 2 , fluoroscopy time (FT) 1.7 min and the number of images was 3. The proposed local DRLs for ERCP were 3.00 Gy cm 2 and 3.0 min. Local DRLs were reviewed in a sample of 25 patients 5 y after they had been established. In reviewing data, the averages of DAP and FT were below the local DRLs. Local DRLs help in the optimisation process of fluoroscopic procedures and guides to a good clinical practice. (authors)

  10. Reference Assessment

    Science.gov (United States)

    Bivens-Tatum, Wayne

    2006-01-01

    This article presents interesting articles that explore several different areas of reference assessment, including practical case studies and theoretical articles that address a range of issues such as librarian behavior, patron satisfaction, virtual reference, or evaluation design. They include: (1) "Evaluating the Quality of a Chat Service"…

  11. Regular Expression Pocket Reference

    CERN Document Server

    Stubblebine, Tony

    2007-01-01

    This handy little book offers programmers a complete overview of the syntax and semantics of regular expressions that are at the heart of every text-processing application. Ideal as a quick reference, Regular Expression Pocket Reference covers the regular expression APIs for Perl 5.8, Ruby (including some upcoming 1.9 features), Java, PHP, .NET and C#, Python, vi, JavaScript, and the PCRE regular expression libraries. This concise and easy-to-use reference puts a very powerful tool for manipulating text and data right at your fingertips. Composed of a mixture of symbols and text, regular exp

  12. R quick syntax reference

    CERN Document Server

    Tollefson, Margot

    2014-01-01

    The R Quick Syntax Reference is a handy reference book detailing the intricacies of the R language. Not only is R a free, open-source tool, R is powerful, flexible, and has state of the art statistical techniques available. With the many details which must be correct when using any language, however, the R Quick Syntax Reference makes using R easier.Starting with the basic structure of R, the book takes you on a journey through the terminology used in R and the syntax required to make R work. You will find looking up the correct form for an expression quick and easy. With a copy of the R Quick

  13. Radiology education 2.0--on the cusp of change: part 2. eBooks; file sharing and synchronization tools; websites/teaching files; reference management tools and note taking applications.

    Science.gov (United States)

    Bhargava, Puneet; Dhand, Sabeen; Lackey, Amanda E; Pandey, Tarun; Moshiri, Mariam; Jambhekar, Kedar

    2013-03-01

    Increasing use of smartphones and handheld computers is accompanied by a rapid growth in the other related industries. Electronic books have revolutionized the centuries-old conventional books and magazines markets and have simplified publishing by reducing the cost and processing time required to create and distribute any given book. We are now able to read, review, store, and share various types of documents via several electronic tools, many of which are available free of charge. Additionally, this electronic revolution has resulted in an explosion of readily available Internet-based educational resources for the residents and has paved the path for educators to reach out to a larger and more diverse student population. Published by Elsevier Inc.

  14. Recent references

    International Nuclear Information System (INIS)

    Ramavataram, S.

    1991-01-01

    In support of a continuing program of systematic evaluation of nuclear structure data, the National Nuclear Data Center maintains a complete computer file of references to the nuclear physics literature. Each reference is tagged by a keyword string, which indicates the kinds of data contained in the article. This master file of Nuclear Structure References (NSR) contains complete keyword indexes to literature published since 1969, with partial indexing of older references. Any reader who finds errors in the keyword descriptions is urged to report them to the National Nuclear Data Center so that the master NSR file can be corrected. In 1966, the first collection of Recent References was published as a separate issue of Nuclear Data Sheets. Every four months since 1970, a similar indexed bibliography to new nuclear experiments has been prepared from additions to the NSR file and published. Beginning in 1978, Recent References was cumulated annually, with the third issue completely superseding the two issues previously published during a given year. Due to publication policy changes, cumulation of Recent Reference was discontinued in 1986. The volume and issue number of all the cumulative issues published to date are given. NNDC will continue to respond to individual requests for special bibliographies on nuclear physics topics, in addition to those easily obtained from Recent References. If the required information is available from the keyword string, a reference list can be prepared automatically from the computer files. This service can be provided on request, in exchange for the timely communication of new nuclear physics results (e.g., preprints). A current copy of the NSR file may also be obtained in a standard format on magnetic tape from NNDC. Requests for special searches of the NSR file may also be directed to the National Nuclear Data Center

  15. Enterprise Reference Library

    Science.gov (United States)

    Bickham, Grandin; Saile, Lynn; Havelka, Jacque; Fitts, Mary

    2011-01-01

    Introduction: Johnson Space Center (JSC) offers two extensive libraries that contain journals, research literature and electronic resources. Searching capabilities are available to those individuals residing onsite or through a librarian s search. Many individuals have rich collections of references, but no mechanisms to share reference libraries across researchers, projects, or directorates exist. Likewise, information regarding which references are provided to which individuals is not available, resulting in duplicate requests, redundant labor costs and associated copying fees. In addition, this tends to limit collaboration between colleagues and promotes the establishment of individual, unshared silos of information The Integrated Medical Model (IMM) team has utilized a centralized reference management tool during the development, test, and operational phases of this project. The Enterprise Reference Library project expands the capabilities developed for IMM to address the above issues and enhance collaboration across JSC. Method: After significant market analysis for a multi-user reference management tool, no available commercial tool was found to meet this need, so a software program was built around a commercial tool, Reference Manager 12 by The Thomson Corporation. A use case approach guided the requirements development phase. The premise of the design is that individuals use their own reference management software and export to SharePoint when their library is incorporated into the Enterprise Reference Library. This results in a searchable user-specific library application. An accompanying share folder will warehouse the electronic full-text articles, which allows the global user community to access full -text articles. Discussion: An enterprise reference library solution can provide a multidisciplinary collection of full text articles. This approach improves efficiency in obtaining and storing reference material while greatly reducing labor, purchasing and

  16. Tech Notebook: E-Reference Tools.

    Science.gov (United States)

    Sassman, Charlotte

    1999-01-01

    Two resources to help students conduct research are the new CD-ROM versions of the Encarta Encyclopedia Deluxe 2000 (for strong readers, grades 5-8) and the Year 2000 Grolier Multimedia Encyclopedia (for strong readers, grades 3 and up). By supplementing traditional text-based information with specialized features (e.g., virtual tours and video…

  17. XSLT 10 Pocket Reference

    CERN Document Server

    Lenz, Evan

    2008-01-01

    XSLT is an essential tool for converting XML into other kinds of documents: HTML, PDF file, and many others. It's a critical technology for XML-based platforms such as Microsoft .NET, Sun Microsystems' Sun One, as well as for most web browsers and authoring tools. As useful as XSLT is, however, most people have a difficult time getting used to its peculiar characteristics. The ability to use advanced techniques depends on a clear and exact understanding of how XSLT templates work and interact. The XSLT 1.0 Pocket Reference from O'Reilly wants to make sure you achieve that level of understan

  18. International Society of Human and Animal Mycology (ISHAM)-ITS reference DNA barcoding database--the quality controlled standard tool for routine identification of human and animal pathogenic fungi.

    Science.gov (United States)

    Irinyi, Laszlo; Serena, Carolina; Garcia-Hermoso, Dea; Arabatzis, Michael; Desnos-Ollivier, Marie; Vu, Duong; Cardinali, Gianluigi; Arthur, Ian; Normand, Anne-Cécile; Giraldo, Alejandra; da Cunha, Keith Cassia; Sandoval-Denis, Marcelo; Hendrickx, Marijke; Nishikaku, Angela Satie; de Azevedo Melo, Analy Salles; Merseguel, Karina Bellinghausen; Khan, Aziza; Parente Rocha, Juliana Alves; Sampaio, Paula; da Silva Briones, Marcelo Ribeiro; e Ferreira, Renata Carmona; de Medeiros Muniz, Mauro; Castañón-Olivares, Laura Rosio; Estrada-Barcenas, Daniel; Cassagne, Carole; Mary, Charles; Duan, Shu Yao; Kong, Fanrong; Sun, Annie Ying; Zeng, Xianyu; Zhao, Zuotao; Gantois, Nausicaa; Botterel, Françoise; Robbertse, Barbara; Schoch, Conrad; Gams, Walter; Ellis, David; Halliday, Catriona; Chen, Sharon; Sorrell, Tania C; Piarroux, Renaud; Colombo, Arnaldo L; Pais, Célia; de Hoog, Sybren; Zancopé-Oliveira, Rosely Maria; Taylor, Maria Lucia; Toriello, Conchita; de Almeida Soares, Célia Maria; Delhaes, Laurence; Stubbe, Dirk; Dromer, Françoise; Ranque, Stéphane; Guarro, Josep; Cano-Lira, Jose F; Robert, Vincent; Velegraki, Aristea; Meyer, Wieland

    2015-05-01

    Human and animal fungal pathogens are a growing threat worldwide leading to emerging infections and creating new risks for established ones. There is a growing need for a rapid and accurate identification of pathogens to enable early diagnosis and targeted antifungal therapy. Morphological and biochemical identification methods are time-consuming and require trained experts. Alternatively, molecular methods, such as DNA barcoding, a powerful and easy tool for rapid monophasic identification, offer a practical approach for species identification and less demanding in terms of taxonomical expertise. However, its wide-spread use is still limited by a lack of quality-controlled reference databases and the evolving recognition and definition of new fungal species/complexes. An international consortium of medical mycology laboratories was formed aiming to establish a quality controlled ITS database under the umbrella of the ISHAM working group on "DNA barcoding of human and animal pathogenic fungi." A new database, containing 2800 ITS sequences representing 421 fungal species, providing the medical community with a freely accessible tool at http://www.isham.org/ and http://its.mycologylab.org/ to rapidly and reliably identify most agents of mycoses, was established. The generated sequences included in the new database were used to evaluate the variation and overall utility of the ITS region for the identification of pathogenic fungi at intra-and interspecies level. The average intraspecies variation ranged from 0 to 2.25%. This highlighted selected pathogenic fungal species, such as the dermatophytes and emerging yeast, for which additional molecular methods/genetic markers are required for their reliable identification from clinical and veterinary specimens. © The Author 2015. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  19. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  20. Deliverable 6.2 - Software: upgraded MC simulation tools capable of simulating a complete in-beam ET experiment, from the beam to the detected events. Report with the description of one (or few) reference clinical case(s), including the complete patient model and beam characteristics

    CERN Document Server

    The ENVISION Collaboration

    2014-01-01

    Deliverable 6.2 - Software: upgraded MC simulation tools capable of simulating a complete in-beam ET experiment, from the beam to the detected events. Report with the description of one (or few) reference clinical case(s), including the complete patient model and beam characteristics

  1. Printed circuit board designer's reference basics

    CERN Document Server

    Robertson, Chris

    2003-01-01

    PCB design instruction and reference manual, all in one book, with in- depth explanation of the processes and tools used in modern PCB design Standards, formulas, definitions, and procedures, plus software to tie it all together.

  2. Java Power Tools

    CERN Document Server

    Smart, John

    2008-01-01

    All true craftsmen need the best tools to do their finest work, and programmers are no different. Java Power Tools delivers 30 open source tools designed to improve the development practices of Java developers in any size team or organization. Each chapter includes a series of short articles about one particular tool -- whether it's for build systems, version control, or other aspects of the development process -- giving you the equivalent of 30 short reference books in one package. No matter which development method your team chooses, whether it's Agile, RUP, XP, SCRUM, or one of many other

  3. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  4. Reference Sources: Little Known to Basic

    Science.gov (United States)

    RQ, 1970

    1970-01-01

    This article lists seventy-eight reference sources, and is divided into the following four sections: (1) Useful But Little-Known Reference Tools by John Fetros, (2) The Statesman's Year-Book by James Becker, (3) Single Volume Scientific Encyclopedias by Jack Clarke and (4) Ten Basic Sources of Business and Economic Statistics by James Woy. (MF)

  5. National Software Reference Library (NSRL)

    Science.gov (United States)

    National Software Reference Library (NSRL) (PC database for purchase)   A collaboration of the National Institute of Standards and Technology (NIST), the National Institute of Justice (NIJ), the Federal Bureau of Investigation (FBI), the Defense Computer Forensics Laboratory (DCFL),the U.S. Customs Service, software vendors, and state and local law enforement organizations, the NSRL is a tool to assist in fighting crime involving computers.

  6. 2002 reference document; Document de reference 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  7. VBE reference framework

    NARCIS (Netherlands)

    Afsarmanesh, H.; Camarinha-Matos, L.M.; Ermilova, E.; Camarinha-Matos, L.M.; Afsarmanesh, H.; Ollus, M.

    2008-01-01

    Defining a comprehensive and generic "reference framework" for Virtual organizations Breeding Environments (VBEs), addressing all their features and characteristics, is challenging. While the definition and modeling of VBEs has become more formalized during the last five years, "reference models"

  8. CMS Statistics Reference Booklet

    Data.gov (United States)

    U.S. Department of Health & Human Services — The annual CMS Statistics reference booklet provides a quick reference for summary information about health expenditures and the Medicare and Medicaid health...

  9. Changing quantum reference frames

    OpenAIRE

    Palmer, Matthew C.; Girelli, Florian; Bartlett, Stephen D.

    2013-01-01

    We consider the process of changing reference frames in the case where the reference frames are quantum systems. We find that, as part of this process, decoherence is necessarily induced on any quantum system described relative to these frames. We explore this process with examples involving reference frames for phase and orientation. Quantifying the effect of changing quantum reference frames serves as a first step in developing a relativity principle for theories in which all objects includ...

  10. Language Management Tools

    DEFF Research Database (Denmark)

    Sanden, Guro Refsum

    This paper offers a review of existing literature on the topic of language management tools – the means by which language is managed – in multilingual organisations. By drawing on a combination of sociolinguistics and international business and management studies, a new taxonomy of language...... management tools is proposed, differentiating between three categories of tools. Firstly, corporate policies are the deliberate control of issues pertaining to language and communication developed at the managerial level of a firm. Secondly, corporate measures are the planned activities the firm’s leadership...... may deploy in order to address the language needs of the organisation. Finally, front-line practices refer to the use of informal, emergent language management tools available to staff members. The language management tools taxonomy provides a framework for operationalising the management of language...

  11. Software test plan/description/report (STP/STD/STR) for the enhanced logistics intratheater support tool (ELIST) global data segment. Version 8.1.0.0, Database Instance Segment Version 8.1.0.0, ...[elided] and Reference Data Segment Version 8.1.0.0 for Solaris 7; TOPICAL

    International Nuclear Information System (INIS)

    Dritz, K.; Absil-Mills, M.; Jacobs, K.

    2002-01-01

    This document is the Software Test Plan/Description/Report (STP/STD/STR) for the DII COE Enhanced Logistics Intratheater Support Tool (ELIST) mission application. It combines in one document the information normally presented separately in a Software Test Plan, a Software Test Description, and a Software Test Report; it also presents this information in one place for all the segments of the ELIST mission application. The primary purpose of this document is to show that ELIST has been tested by the developer and found, by that testing, to install, deinstall, and work properly. The information presented here is detailed enough to allow the reader to repeat the testing independently. The remainder of this document is organized as follows. Section 1.1 identifies the ELIST mission application. Section 2 is the list of all documents referenced in this document. Section 3, the Software Test Plan, outlines the testing methodology and scope-the latter by way of a concise summary of the tests performed. Section 4 presents detailed descriptions of the tests, along with the expected and observed results; that section therefore combines the information normally found in a Software Test Description and a Software Test Report. The remaining small sections present supplementary information. Throughout this document, the phrase ELIST IP refers to the Installation Procedures (IP) for the Enhanced Logistics Intratheater Support Tool (ELIST) Global Data Segment, Database Instance Segment, Database Fill Segment, Database Segment, Database Utility Segment, Software Segment, and Reference Data Segment

  12. IAEA biological reference materials

    International Nuclear Information System (INIS)

    Parr, R.M.; Schelenz, R.; Ballestra, S.

    1988-01-01

    The Analytical Quality Control Services programme of the IAEA encompasses a wide variety of intercomparisons and reference materials. This paper reviews only those aspects of the subject having to do with biological reference materials. The 1988 programme foresees 13 new intercomparison exercises, one for major, minor and trace elements, five for radionuclides, and seven for stable isotopes. Twenty-two natural matrix biological reference materials are available: twelve for major, minor and trace elements, six for radionuclides, and four for chlorinated hydrocarbons. Seven new intercomparisons and reference materials are in preparation or under active consideration. Guidelines on the correct use of reference materials are being prepared for publication in 1989 in consultation with other major international producers and users of biological reference materials. The IAEA database on available reference materials is being updated and expanded in scope, and a new publication is planned for 1989. (orig.)

  13. Development of beta reference radiations

    International Nuclear Information System (INIS)

    Wan Zhaoyong; Cai Shanyu; Li Yanbo; Yin Wei; Feng Jiamin; Sun Yuhua; Li Yongqiang

    1997-09-01

    A system of beta reference radiation has been developed, that is composed of 740 MBq 147 Pm beta source, 74 MBq and 740 MBq 90 Sr + 90 Y β sources, compensation filters, a source handling tool, a source jig, spacing bars, a shutter, a control unit and a beta dose meter calibration stand. For 740 MBq 147 Pm and 74 MBq 90 Sr + 90 Y beta reference radiations with compensation filters and 740 MBq 90 Sr + 90 Y beta reference radiation without compensation filter, at 20 cm, 30 cm and 30 cm distance separately; the residual energy of maximum is 0.14 MeV, 1.98 MeV and 2.18 MeV separately; the absorbed dose to tissue D (0.07) is 1.547 mGy/h (1996-05-20), 5.037 mGy/h (1996-05-10) and 93.57 mGy/h (1996-05-15) separately; the total uncertainty is 3.0%, 1.7% and 1.7% separately. For the first and the second beta reference radiation, the dose rate variability in the area of 18 cm diameter in the plane perpendicular to the beta-ray beam axis is within +-6% and +-3% separately. (3 refs., 2 tabs., 8 figs.)

  14. Benchmarking reference services: an introduction.

    Science.gov (United States)

    Marshall, J G; Buchanan, H S

    1995-01-01

    Benchmarking is based on the common sense idea that someone else, either inside or outside of libraries, has found a better way of doing certain things and that your own library's performance can be improved by finding out how others do things and adopting the best practices you find. Benchmarking is one of the tools used for achieving continuous improvement in Total Quality Management (TQM) programs. Although benchmarking can be done on an informal basis, TQM puts considerable emphasis on formal data collection and performance measurement. Used to its full potential, benchmarking can provide a common measuring stick to evaluate process performance. This article introduces the general concept of benchmarking, linking it whenever possible to reference services in health sciences libraries. Data collection instruments that have potential application in benchmarking studies are discussed and the need to develop common measurement tools to facilitate benchmarking is emphasized.

  15. Students are Confident Using Federated Search Tools as much as Single Databases. A Review of: Armstrong, A. (2009. Student perceptions of federated searching vs. single database searching. Reference Services Review, 37(3, 291-303. doi:10.1108/00907320910982785

    Directory of Open Access Journals (Sweden)

    Deena Yanofsky

    2011-09-01

    Participants indicated a slight preference for using a federated search tool over a single multidisciplinary database. Of the 31 students who completed the evaluation worksheet, 16 (51.6% found that their search results were more relevant in the federated search tool; 10 (32.3% students reported that the articles they found were more relevant in the single database. Three students stated that both search tools produced equally relevant results and two students responded that neither resource produced relevant results on their topic.When asked to state which resource they would be likely to use in the future, 22 students (71% indicated that they would use the federated search tool and 21 (67.7% students answered that they would use the single multidisciplinary database. Of the participants who expressed potential use of the single database to look for articles in the future, 43% referred to the ease of use or efficiency of the search tool in their responses. Similarly, more than half of thestudents who stated that they would use the federated search tool in the future (54.5% also cited ease of use or efficiency in their answers.In total, 11 students (35.5% stated that they would be unlikely to use the federated search tool for future research. In their responses, students referred to the inefficiency or complexity of the research tool. Of the 12 participants (38.7% who stated that they would be unlikely to use the single multidisciplinary database, 50% cited a lack of relevant results and 42% referred to the overall complexity and inefficiency of the database.Conclusions – The results of this study do not support a significant preference among undergraduate students for either search tool. Though some participants struggled with terminology or various features of each resource, more students expressed confidence and satisfaction with the search process no matter which tool they opted to use.Given student confidence and comfort level in both research environments, the author

  16. Nuclear power a reference handbook

    CERN Document Server

    Henderson, Harry R

    2014-01-01

    In the 21st century, nuclear power has been identified as a viable alternative to traditional energy sources to stem global climate change, and condemned as risky to human health and environmentally irresponsible. Do the advantages of nuclear energy outweigh the risks, especially in light of the meltdown at the Fukushima plant in 2011? This guide provides both a comprehensive overview of this critical and controversial technology, presenting reference tools that include important facts and statistics, biographical profiles, a chronology, and a glossary. It covers major controversies and proposed solutions in detail and contains contributions by experts and important stakeholders that provide invaluable perspective on the topic.

  17. Indoor air: Reference bibliography

    International Nuclear Information System (INIS)

    Campbell, D.; Staves, D.; McDonald, S.

    1989-07-01

    The U. S. Environmental Protection Agency initially established the indoor air Reference Bibliography in 1987 as an appendix to the Indoor Air Quality Implementation Plan. The document was submitted to Congress as required under Title IV--Radon Gas and Indoor Air Quality Research of the Superfund Amendments and Reauthorization Act of 1986. The Reference Bibliography is an extensive bibliography of reference materials on indoor air pollution. The Bibliography contains over 4500 citations and continues to increase as new articles appear

  18. Android quick APIs reference

    CERN Document Server

    Cinar, Onur

    2015-01-01

    The Android Quick APIs Reference is a condensed code and APIs reference for the new Google Android 5.0 SDK. It presents the essential Android APIs in a well-organized format that can be used as a handy reference. You won't find any technical jargon, bloated samples, drawn out history lessons, or witty stories in this book. What you will find is a software development kit and APIs reference that is concise, to the point and highly accessible. The book is packed with useful information and is a must-have for any mobile or Android app developer or programmer. In the Android Quick APIs Refe

  19. Simulation tools

    CERN Document Server

    Jenni, F

    2006-01-01

    In the last two decades, simulation tools made a significant contribution to the great progress in development of power electronics. Time to market was shortened and development costs were reduced drastically. Falling costs, as well as improved speed and precision, opened new fields of application. Today, continuous and switched circuits can be mixed. A comfortable number of powerful simulation tools is available. The users have to choose the best suitable for their application. Here a simple rule applies: The best available simulation tool is the tool the user is already used to (provided, it can solve the task). Abilities, speed, user friendliness and other features are continuously being improved—even though they are already powerful and comfortable. This paper aims at giving the reader an insight into the simulation of power electronics. Starting with a short description of the fundamentals of a simulation tool as well as properties of tools, several tools are presented. Starting with simplified models ...

  20. Marketing Reference Services.

    Science.gov (United States)

    Norman, O. Gene

    1995-01-01

    Relates the marketing concept to library reference services. Highlights include a review of the literature and an overview of marketing, including research, the marketing mix, strategic plan, marketing plan, and marketing audit. Marketing principles are applied to reference services through the marketing mix elements of product, price, place, and…

  1. Reference class forecasting

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    optimisme og misinformation. RCF bygger på teorier, som vandt Daniel Kahneman Nobelprisen i økonomi i 2002. RCF estimerer budgettet for et givet projekt på grundlag af de faktiske udfald for budgetterne i en reference-klasse af projekter. RCF udføres i tre trin: 1. Identifikation af en relevant reference...

  2. Uranium reference materials

    International Nuclear Information System (INIS)

    Donivan, S.; Chessmore, R.

    1987-07-01

    The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs

  3. STL pocket reference

    CERN Document Server

    Lischner, Ray

    2003-01-01

    The STL Pocket Reference describes the functions, classes, and templates in that part of the C++ standard library often referred to as the Standard Template Library (STL). The STL encompasses containers, iterators, algorithms, and function objects, which collectively represent one of the most important and widely used subsets of standard library functionality. The C++ standard library, even the subset known as the STL, is vast. It's next to impossible to work with the STL without some sort of reference at your side to remind you of template parameters, function invocations, return types--ind

  4. Handbook of reference electrodes

    CERN Document Server

    Inzelt, György; Scholz, Fritz

    2013-01-01

    Reference Electrodes are a crucial part of any electrochemical system, yet an up-to-date and comprehensive handbook is long overdue. Here, an experienced team of electrochemists provides an in-depth source of information and data for the proper choice and construction of reference electrodes. This includes all kinds of applications such as aqueous and non-aqueous solutions, ionic liquids, glass melts, solid electrolyte systems, and membrane electrodes. Advanced technologies such as miniaturized, conducting-polymer-based, screen-printed or disposable reference electrodes are also covered. Essen

  5. Neptunium: a bibliographic reference

    International Nuclear Information System (INIS)

    Mosley, R.E.

    1979-06-01

    A comprehensive bibliograhy of the literature on the element neptunium published prior to January 1976 is presented. A short abstract is given for each listed reference, with a few exceptions. The references are divided into sections categorized as General, Man-Made Sources (Reactors), Man-Made Sources (Fuel Reprocessing), Chemistry (Solubility), Chemistry (Compounds), Chemistry (Isotopes), Analyses (Instrumental), Analyses (Chemical), Chemical (Animal), Biological (Effects), Biological (Animal-Metabolism-Retention), Biological (Air Movement), Biological (Human Inhalation), Measurement, and Dosimetry. The bibliography contains author and keyword indexes and was compiled to serve as a quick reference source for neptunium-related work. 184 citations

  6. CSS Pocket Reference

    CERN Document Server

    Meyer, Eric

    2011-01-01

    When you're working with CSS and need a quick answer, CSS Pocket Reference delivers. This handy, concise book provides all of the essential information you need to implement CSS on the fly. Ideal for intermediate to advanced web designers and developers, the 4th edition is revised and updated for CSS3, the latest version of the Cascading Style Sheet specification. Along with a complete alphabetical reference to CSS3 selectors and properties, you'll also find a short introduction to the key concepts of CSS. Based on Cascading Style Sheets: The Definitive Guide, this reference is an easy-to-us

  7. Biomedical Engineering Desk Reference

    CERN Document Server

    Ratner, Buddy D; Schoen, Frederick J; Lemons, Jack E; Dyro, Joseph; Martinsen, Orjan G; Kyle, Richard; Preim, Bernhard; Bartz, Dirk; Grimnes, Sverre; Vallero, Daniel; Semmlow, John; Murray, W Bosseau; Perez, Reinaldo; Bankman, Isaac; Dunn, Stanley; Ikada, Yoshito; Moghe, Prabhas V; Constantinides, Alkis

    2009-01-01

    A one-stop Desk Reference, for Biomedical Engineers involved in the ever expanding and very fast moving area; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the biomedical engineering field. Material covers a broad range of topics including: Biomechanics and Biomaterials; Tissue Engineering; and Biosignal Processing* A hard-working desk reference providing all the essential material needed by biomedical and clinical engineers on a day-to-day basis * Fundamentals, key techniques,

  8. LINQ Pocket Reference

    CERN Document Server

    Albahari, Joseph

    2008-01-01

    Ready to take advantage of LINQ with C# 3.0? This guide has the detail you need to grasp Microsoft's new querying technology, and concise explanations to help you learn it quickly. And once you begin to apply LINQ, the book serves as an on-the-job reference when you need immediate reminders. All the examples in the LINQ Pocket Reference are preloaded into LINQPad, the highly praised utility that lets you work with LINQ interactively. Created by the authors and free to download, LINQPad will not only help you learn LINQ, it will have you thinking in LINQ. This reference explains: LINQ's ke

  9. Positional reference system for ultraprecision machining

    Science.gov (United States)

    Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

    1980-09-12

    A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

  10. Positional reference system for ultraprecision machining

    International Nuclear Information System (INIS)

    Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

    1982-01-01

    A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlledmultiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of position interferometers and part contour description data inputs to calculate error components for each axis of movement and output them to corresponding axis drives with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base

  11. Arctic Capability Inventory Tool User Guide: Version 2 (International References)

    Science.gov (United States)

    2011-07-01

    Liechtenstein,Lithuania,Luxembourg,Macedonia,Malta,MarshallIslands,Moldova,Mongolia, Montenegro ,Morocco,TheNetherlands,NewZealand,Norway,Oman...thattheirusewouldbedetrimental tohumansoranimalsor plants thatareusefultohumans;and (b)anywaterthatcontainsasubstanceinsucha...detrimentaltohumansoranimalsor plants thatareusefultohumans. Application Geographicalapplication 76.ThisDivisionappliesinrespect

  12. VLSI Design Tools, Reference Manual, Release 2.0.

    Science.gov (United States)

    1984-08-01

    eder. 2.3 ITACV: Libary ofC readne. far oesumdg a layoit 1-,, tiling. V ~2.4 "QUILT: CeinS"Wbesa-i-M-8euar ray f atwok til 2.5 "TIL: Tockmeleff...8217patterns package was added so that complex and repetitive digital waveforms could be generated far more easily. The recently written program MTP (Multiple...circuit model to estimate timing delays through digital circuits. It also has a mode that allows it to be used as a switch (gate) level simulator

  13. Reference Guide. Indoor Air Quality Tools for Schools

    Science.gov (United States)

    US Environmental Protection Agency, 2009

    2009-01-01

    Understanding the importance of good indoor air quality (IAQ) in schools is the backbone of developing an effective Indoor Air Quality (IAQ) program. Poor IAQ can lead to a large variety of health problems and potentially affect comfort, concentration, and staff/student performance. In recognition of tight school budgets, this guidance is designed…

  14. Foundations for Tools as a Service Workspace: A Reference Architecture

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef

    S). However, providing the resources corresponding to a domain following *aaS requires specific challenges associated with the domain to be addressed. Software as a Service (SaaS) model enables software vendors to offer their software solutions to end users following pay-per-use model. SaaS also enables end...... users to have access to the software system without being bound into long-term license commitments and without incurring additional infrastructure and maintenance overheads. Though SaaS has been successful in providing stand-alone applications where users can perform a specific set of activities using...... an application, applicability of SaaS for scenarios where users need to use a number of software systems to perform activities and associated tasks is limited. A typical such use case is the activities associated with software engineering domains in general and software architecting domain in particular...

  15. Developing hospital identity manuals: a reference tool for illustrators.

    Science.gov (United States)

    Schaffer, J A; Zimmerman, S B

    1990-01-01

    Because of an increase in hospital marketing efforts, medical illustrators may be asked to assist in developing and implementing hospital identity manuals, which specify the graphic standards for visual communications media. A checklist survey of existing identity manuals and a literature review were conducted by one of the authors, a medical illustrator, to help her to develop a manual for her hospital employer. This article documents the literature review, the study, and the identity manual development, and presents recommendations to help other medical illustrators who might become involved in similar assignments.

  16. Optimal primitive reference frames

    International Nuclear Information System (INIS)

    Jennings, David

    2011-01-01

    We consider the smallest possible directional reference frames allowed and determine the best one can ever do in preserving quantum information in various scenarios. We find that for the preservation of a single spin state, two orthogonal spins are optimal primitive reference frames; and in a product state, they do approximately 22% as well as an infinite-sized classical frame. By adding a small amount of entanglement to the reference frame, this can be raised to 2(2/3) 5 =26%. Under the different criterion of entanglement preservation, a very similar optimal reference frame is found; however, this time it is for spins aligned at an optimal angle of 87 deg. In this case 24% of the negativity is preserved. The classical limit is considered numerically, and indicates under the criterion of entanglement preservation, that 90 deg. is selected out nonmonotonically, with a peak optimal angle of 96.5 deg. for L=3 spins.

  17. Reference Climatological Stations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Reference Climatological Stations (RCS) network represents the first effort by NOAA to create and maintain a nationwide network of stations located only in areas...

  18. Toxicity Reference Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Toxicity Reference Database (ToxRefDB) contains approximately 30 years and $2 billion worth of animal studies. ToxRefDB allows scientists and the interested...

  19. Python essential reference

    CERN Document Server

    Beazley, David M

    2009-01-01

    Python Essential Reference is the definitive reference guide to the Python programming language — the one authoritative handbook that reliably untangles and explains both the core Python language and the most essential parts of the Python library. Designed for the professional programmer, the book is concise, to the point, and highly accessible. It also includes detailed information on the Python library and many advanced subjects that is not available in either the official Python documentation or any other single reference source. Thoroughly updated to reflect the significant new programming language features and library modules that have been introduced in Python 2.6 and Python 3, the fourth edition of Python Essential Reference is the definitive guide for programmers who need to modernize existing Python code or who are planning an eventual migration to Python 3. Programmers starting a new Python project will find detailed coverage of contemporary Python programming idioms.

  20. Collaborative networks: Reference modeling

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Afsarmanesh, H.

    2008-01-01

    Collaborative Networks: Reference Modeling works to establish a theoretical foundation for Collaborative Networks. Particular emphasis is put on modeling multiple facets of collaborative networks and establishing a comprehensive modeling framework that captures and structures diverse perspectives of

  1. Ozone Standard Reference Photometer

    Data.gov (United States)

    Federal Laboratory Consortium — The Standard Reference Photometer (SRP) Program began in the early 1980s as collaboration between NIST and the U.S. Environmental Protection Agency (EPA) to design,...

  2. Comparability of reference values

    International Nuclear Information System (INIS)

    Rossbach, M.; Stoeppler, M.

    1993-01-01

    Harmonization of certified values in Reference Materials (RMs) can be carried out by applying nuclear analytical techniques to RMs of various matrix types and concentration levels. Although RMs generally should not be used as primary standards the cross evaluation of concentrations in RMs leads to better compatibility of reference values and thus to a greater agreement between analytical results from different laboratories using these RMs for instrument calibration and quality assurance. (orig.)

  3. Electronics engineer's reference book

    CERN Document Server

    Turner, L W

    1976-01-01

    Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

  4. 2002 reference document

    International Nuclear Information System (INIS)

    2002-01-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  5. Reference Inflow Characterization for River Resource Reference Model (RM2)

    Energy Technology Data Exchange (ETDEWEB)

    Neary, Vincent S [ORNL

    2011-12-01

    Sandia National Laboratory (SNL) is leading an effort to develop reference models for marine and hydrokinetic technologies and wave and current energy resources. This effort will allow the refinement of technology design tools, accurate estimates of a baseline levelized cost of energy (LCoE), and the identification of the main cost drivers that need to be addressed to achieve a competitive LCoE. As part of this effort, Oak Ridge National Laboratory was charged with examining and reporting reference river inflow characteristics for reference model 2 (RM2). Published turbulent flow data from large rivers, a water supply canal and laboratory flumes, are reviewed to determine the range of velocities, turbulence intensities and turbulent stresses acting on hydrokinetic technologies, and also to evaluate the validity of classical models that describe the depth variation of the time-mean velocity and turbulent normal Reynolds stresses. The classical models are found to generally perform well in describing river inflow characteristics. A potential challenge in river inflow characterization, however, is the high variability of depth and flow over the design life of a hydrokinetic device. This variation can have significant effects on the inflow mean velocity and turbulence intensity experienced by stationary and bottom mounted hydrokinetic energy conversion devices, which requires further investigation, but are expected to have minimal effects on surface mounted devices like the vertical axis turbine device designed for RM2. A simple methodology for obtaining an approximate inflow characterization for surface deployed devices is developed using the relation umax=(7/6)V where V is the bulk velocity and umax is assumed to be the near-surface velocity. The application of this expression is recommended for deriving the local inflow velocity acting on the energy extraction planes of the RM2 vertical axis rotors, where V=Q/A can be calculated given a USGS gage flow time

  6. Reference Japanese man

    International Nuclear Information System (INIS)

    Tanaka, Giichiro

    1985-01-01

    To make real and accurate dose assessment method so far, it is necessitated to provide ''Reference Japanese Man'' based on anotomical, physiological and biochemical data of Japanese people instead of the Reference Man presented in ICRP Publications 23 and 30. This review describes present status of researched for the purpose of establishing of Reference Japanese Man. The Reference Japanese Man is defined as a male or female adult who lives in Japan with a Japanese life-style and food custom. His stature and body weight, and the other data was decided as mean values of male or female people of Japan. As for food custom, Japanese people take significantly smaller amount of meat and milk products than Western people, while larger intake amount of cereals and marine products such as fish or seaweeds. Weight of organs is a principal factor for internal dose assessment and mean values for living Japanese adult has been investigated and the value employable for dose assessment for organs and tissues are shown. To employ these values of Reference Japanese Man, it should be taken into account of age. Metabolic parameters should also be considered. Iodine metabolism in Japanese is quite different from that of Western people. The above-mentioned data are now tentatively employing in modification of table of MIRD method and others. (Takagi, S.)

  7. Reference costs of electricity

    International Nuclear Information System (INIS)

    Terraz, N.

    1997-01-01

    The calculation of electric power production reference costs is used in France, even in the present case of over-capacity, for comparing the relative interest of the various means of power generation (nuclear plants, coal plants, hydroelectricity, gas combined cycles, etc.) and as an aid for future investment decisions. Reference costs show a sharp decrease between 1993 and 1997 due to advancements in nuclear plant operating ability and fossil fuel price decrease. Actuarial rates, plant service life, fuel costs and exchange rates are important parameters. The various costs from the research stage to the waste processing stages are discussed and the reference costs of the various power generation systems are presented and compared together with their competitiveness; the future of wind energy and cogeneration and the prospective of the renewal of nuclear plants at the 2010 horizon are also addressed

  8. Setting reference targets

    International Nuclear Information System (INIS)

    Ruland, R.E.

    1997-04-01

    Reference Targets are used to represent virtual quantities like the magnetic axis of a magnet or the definition of a coordinate system. To explain the function of reference targets in the sequence of the alignment process, this paper will first briefly discuss the geometry of the trajectory design space and of the surveying space, then continue with an overview of a typical alignment process. This is followed by a discussion on magnet fiducialization. While the magnetic measurement methods to determine the magnetic centerline are only listed (they will be discussed in detail in a subsequent talk), emphasis is given to the optical/mechanical methods and to the task of transferring the centerline position to reference targets

  9. Electrical engineer's reference book

    CERN Document Server

    Jones, G R

    2013-01-01

    A long established reference book: radical revision for the fifteenth edition includes complete rearrangement to take in chapters on new topics and regroup the subjects covered for easy access to information.The Electrical Engineer's Reference Book, first published in 1945, maintains its original aims: to reflect the state of the art in electrical science and technology and cater for the needs of practising engineers. Most chapters have been revised and many augmented so as to deal properly with both fundamental developments and new technology and applications that have come to the fore since

  10. Python pocket reference

    CERN Document Server

    Lutz, Mark

    2010-01-01

    This is the book to reach for when you're coding on the fly and need an answer now. It's an easy-to-use reference to the core language, with descriptions of commonly used modules and toolkits, and a guide to recent changes, new features, and upgraded built-ins -- all updated to cover Python 3.X as well as version 2.6. You'll also quickly find exactly what you need with the handy index. Written by Mark Lutz -- widely recognized as the world's leading Python trainer -- Python Pocket Reference, Fourth Edition, is the perfect companion to O'Reilly's classic Python tutorials, also written by Mark

  11. The Reference Return Ratio

    DEFF Research Database (Denmark)

    Nicolaisen, Jeppe; Faber Frandsen, Tove

    2008-01-01

    The paper introduces a new journal impact measure called The Reference Return Ratio (3R). Unlike the traditional Journal Impact Factor (JIF), which is based on calculations of publications and citations, the new measure is based on calculations of bibliographic investments (references) and returns...... (citations). A comparative study of the two measures shows a strong relationship between the 3R and the JIF. Yet, the 3R appears to correct for citation habits, citation dynamics, and composition of document types - problems that typically are raised against the JIF. In addition, contrary to traditional...

  12. Perl Pocket Reference

    CERN Document Server

    Vromans, Johan

    2011-01-01

    If you have a Perl programming question, you'll find the answer quickly in this handy, easy-to-use quick reference. The Perl Pocket Reference condenses and organizes stacks of documentation down to the most essential facts, so you can find what you need in a heartbeat. Updated for Perl 5.14, the 5th edition provides a summary of Perl syntax rules and a complete list of operators, built-in functions, and other features. It's the perfect companion to O'Reilly's authoritative and in-depth Perl programming books, including Learning Perl, Programming Perl, and the Perl Cookbook..

  13. HTML & XHTML Pocket Reference

    CERN Document Server

    Robbins, Jennifer

    2010-01-01

    After years of using spacer GIFs, layers of nested tables, and other improvised solutions for building your web sites, getting used to the more stringent standards-compliant design can be intimidating. HTML and XHTML Pocket Reference is the perfect little book when you need answers immediately. Jennifer Niederst-Robbins, author Web Design in a Nutshell, has revised and updated the fourth edition of this pocket guide by taking the top 20% of vital reference information from her Nutshell book, augmenting it judiciously, cross-referencing everything, and organizing it according to the most com

  14. CSS Pocket Reference

    CERN Document Server

    Meyer, Eric A

    2007-01-01

    They say that good things come in small packages, and it's certainly true for this edition of CSS Pocket Reference. Completely revised and updated to reflect the latest Cascading Style Sheet specifications in CSS 2.1, this indispensable little book covers the most essential information that web designers and developers need to implement CSS effectively across all browsers. Inside, you'll find: A short introduction to the key concepts of CSS A complete alphabetical reference to all CSS 2.1 selectors and properties A chart displaying detailed information about CSS support for every style ele

  15. JDBC Pocket Reference

    CERN Document Server

    Bales, Donald

    2003-01-01

    JDBC--the Java Database Connectivity specification--is a complex set of application programming interfaces (APIs) that developers need to understand if they want their Java applications to work with databases. JDBC is so complex that even the most experienced developers need to refresh their memories from time to time on specific methods and details. But, practically speaking, who wants to stop and thumb through a weighty tutorial volume each time a question arises? The answer is the JDBC Pocket Reference, a data-packed quick reference that is both a time-saver and a lifesaver. The JDBC P

  16. Reference values for electrooculography

    International Nuclear Information System (INIS)

    Barrientos Castanno, Alberto; Herrera Mora, Maritza; Garcia Baez, Obel

    2012-01-01

    Obtain electrooculographic reference values based on the patterns set by the Standardization Committee of the International Society for Clinical Electrophysiology of Vision (ISCEV). the lowest amplitude values of the potential ranged between 388 and 882 μv in the dark phase. The light peak was obtained between 9 and 10 minutes, and during this phase the potential reached an amplitude ranging between 808 and 1 963 μv. This amplitude variability may be related to the fact that the test was conducted without pupillary mydriasis. The reference value obtained for Arden index was 1,55 to 2,87

  17. NASCAP programmer's reference manual

    Science.gov (United States)

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-05-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  18. Multipass Steering: A Reference Implementation

    Science.gov (United States)

    Hennessey, Michael; Tiefenback, Michael

    2015-10-01

    We introduce a reference implementation of a protocol to compute corrections that bring all beams in one of the CEBAF linear accelerators (linac) to axis, including, with a larger tolerance, the lowest energy pass using measured beam trajectory data. This method relies on linear optics as representation of the system; we treat beamline perturbations as magnetic field errors localized to regions between cryomodules, providing the same transverse momentum kick to each beam. We produce a vector of measured beam position data with which we left-multiply the pseudo-inverse of a coefficient array, A, that describes the transport of the beam through the linac using parameters that include the magnetic offsets of the quadrupole magnets, the instrumental offsets of the BPMs, and the beam initial conditions. This process is repeated using a reduced array to produce values that can be applied to the available correcting magnets and beam initial conditions. We show that this method is effective in steering the beam to a straight axis along the linac by using our values in elegant, the accelerator simulation program, on a model of the linac in question. The algorithms in this reference implementation provide a tool for systematic diagnosis and cataloging of perturbations in the beam line. Supported by Jefferson Lab, Old Dominion University, NSF, DOE.

  19. CVS pocket reference

    CERN Document Server

    Purdy, Gregor N

    2003-01-01

    The beauty of open source is making code freely available. The curse is trying to organize the chaos that code development can evolve into. CVS, the Concurrent Version System, is an open source tool for managing and distributing source code. It allows multiple users dispersed over a wide geographic area to work on the same file at the same time, using a shared directory. Under CVS, multiple users can check out files from a directory tree, make changes, and then commit those changes back into the directory. CVS is a pivotal tool on many projects involving information or software, whether in-ho

  20. Book Catalogs; Selected References.

    Science.gov (United States)

    Brandhorst, Wesley T.

    The 116 citations on book catalogs are divided into the following two main sections: (1) Selected References, in alphabetic sequence by personal or institutional author and (2) Anonymous Entries, in alphabetic sequence by title. One hundred and seven of the citations cover the years 1960 through March 1969. There are five scattered citations in…

  1. ROOT Reference Documentation

    CERN Document Server

    Fuakye, Eric Gyabeng

    2017-01-01

    A ROOT Reference Documentation has been implemented to generate all the lists of libraries needed for each ROOT class. Doxygen has no option to generate or add the lists of libraries for each ROOT class. Therefore shell scripting and a basic C++ program was employed to import the lists of libraries needed by each ROOT class.

  2. Hospitality Services Reference Book.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    This reference book provides information needed by employees in hospitality services occupations. It includes 29 chapters that cover the following topics: the hospitality services industry; professional ethics; organization and management structures; safety practices and emergency procedures; technology; property maintenance and repair; purchasing…

  3. Quantum frames of reference

    International Nuclear Information System (INIS)

    Kaufherr, T.

    1981-01-01

    The idea that only relative variables have physical meaning came to be known as Mach's principle. Carrying over this idea to quantum theory, has led to the consideration of finite mass, macroscopic reference frames, relative to which all physical quantities are measured. During the process of measurement, a finite mass observer receives a kickback, and this reaction of the measuring device is not negligible in quantum theory because of the quantization of the action. Hence, the observer himself has to be included in the system that is being considered. Using this as the starting point, a number of thought experiments involving finite mass observers is discussed which have quantum uncertainties in their time or in their position. These thought experiments serve to elucidate in a qualitative way some of the difficulties involved, as well as pointing out a direction to take in seeking solutions to them. When the discussion is extended to include more than one observer, the question of the covariance of the theory immediately arises. Because none of the frames of reference should be preferred, the theory should be covariant. This demand expresses an equivalence principle which here is extended to include reference frames which are in quantum uncertainties relative to each other. Formulating the problem in terms of canonical variables, the ensueing free Hamiltonian contains vector and scalar potentials which represent the kick that the reference frame receives during measurement. These are essentially gravitational type potentials, resulting, as it were, from the extension of the equivalence principle into the quantum domain

  4. Pollen reference collection digitization

    NARCIS (Netherlands)

    Ercan, F.E.Z.; Donders, T.H.; Bijl, P.K.; Wagner, F.

    2016-01-01

    The extensive Utrecht University pollen reference collection holds thousands of pollen samples of many species and genera from all over the world and has been a basis for the widely-used North West European Pollen Flora. These samples are fixed on glass slides for microscopy use, but the aging

  5. Virtual Reference Services.

    Science.gov (United States)

    Brewer, Sally

    2003-01-01

    As the need to access information increases, school librarians must create virtual libraries. Linked to reliable reference resources, the virtual library extends the physical collection and library hours and lets students learn to use Web-based resources in a protected learning environment. The growing number of virtual schools increases the need…

  6. Reference-Dependent Sympathy

    Science.gov (United States)

    Small, Deborah A.

    2010-01-01

    Natural disasters and other traumatic events often draw a greater charitable response than do ongoing misfortunes, even those that may cause even more widespread misery, such as famine or malaria. Why is the response disproportionate to need? The notion of reference dependence critical to Prospect Theory (Kahneman & Tversky, 1979) maintains that…

  7. Genetics Home Reference

    Science.gov (United States)

    ... Page Search Home Health Conditions Genes Chromosomes & mtDNA Resources Help Me Understand Genetics Share: Email Facebook Twitter Genetics Home Reference provides consumer-friendly information about the effects of genetic variation on human health. Health Conditions More than 1,200 health ...

  8. Python library reference

    NARCIS (Netherlands)

    G. van Rossum (Guido)

    1995-01-01

    textabstractPython is an extensible, interpreted, object-oriented programming language. It supports a wide range of applications, from simple text processing scripts to interactive WWW browsers. While the Python Reference Manual describes the exact syntax and semantics of the language, it does not

  9. Authoring Tools

    Science.gov (United States)

    Treviranus, Jutta

    Authoring tools that are accessible and that enable authors to produce accessible Web content play a critical role in web accessibility. Widespread use of authoring tools that comply to the W3C Authoring Tool Accessibility Guidelines (ATAG) would ensure that even authors who are neither knowledgeable about nor particularly motivated to produce accessible content do so by default. The principles and techniques of ATAG are discussed. Some examples of accessible authoring tools are described including authoring tool content management components such as TinyMCE. Considerations for creating an accessible collaborative environment are also covered. As part of providing accessible content, the debate between system-based personal optimization and one universally accessible site configuration is presented. The issues and potential solutions to address the accessibility crisis presented by the advent of rich internet applications are outlined. This challenge must be met to ensure that a large segment of the population is able to participate in the move toward the web as a two-way communication mechanism.

  10. Tool steels

    DEFF Research Database (Denmark)

    Højerslev, C.

    2001-01-01

    On designing a tool steel, its composition and heat treatment parameters are chosen to provide a hardened and tempered martensitic matrix in which carbides are evenly distributed. In this condition the matrix has an optimum combination of hardness andtoughness, the primary carbides provide...... resistance against abrasive wear and secondary carbides (if any) increase the resistance against plastic deformation. Tool steels are alloyed with carbide forming elements (Typically: vanadium, tungsten, molybdenumand chromium) furthermore some steel types contains cobalt. Addition of alloying elements...... serves primarily two purpose (i) to improve the hardenabillity and (ii) to provide harder and thermally more stable carbides than cementite. Assuming proper heattreatment, the properties of a tool steel depends on the which alloying elements are added and their respective concentrations....

  11. A Reference Framework for Concurrent Engineering

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Considering the diversity of methods and tools offered to concurrent engineering, the aspects playing important roles in the concurrent engineering c ontext have been pinpointed as being four core elements which are Activity, Meth od, Object and Information. Based on these four elements, a reference framework called AMOI is proposed to be the guideline for the systematic concurrent produc t design. Using the AMOI reference framework, concurrent product development sys tem can be structured into four function models (including the activity model, m ethod model, object model and information model) which are interconnected with e ach other.

  12. Management Tools

    Science.gov (United States)

    1987-01-01

    Manugistics, Inc. (formerly AVYX, Inc.) has introduced a new programming language for IBM and IBM compatible computers called TREES-pls. It is a resource management tool originating from the space shuttle, that can be used in such applications as scheduling, resource allocation project control, information management, and artificial intelligence. Manugistics, Inc. was looking for a flexible tool that can be applied to many problems with minimal adaptation. Among the non-government markets are aerospace, other manufacturing, transportation, health care, food and beverage and professional services.

  13. ``Frames of Reference'' revisited

    Science.gov (United States)

    Steyn-Ross, Alistair; Ivey, Donald G.

    1992-12-01

    The PSSC teaching film, ``Frames of Reference,'' was made in 1960, and was one of the first audio-visual attempts at showing how your physical ``point of view,'' or frame of reference, necessarily alters both your perceptions and your observations of motion. The gentle humor and original demonstrations made a lasting impact on many audiences, and with its recent re-release as part of the AAPT Cinema Classics videodisc it is timely that we should review both the message and the methods of the film. An annotated script and photographs from the film are presented, followed by extension material on rotating frames which teachers may find appropriate for use in their classrooms: constructions, demonstrations, an example, and theory.

  14. Program reference schedule baseline

    International Nuclear Information System (INIS)

    1986-07-01

    This Program Reference Schedule Baseline (PRSB) provides the baseline Program-level milestones and associated schedules for the Civilian Radioactive Waste Management Program. It integrates all Program-level schedule-related activities. This schedule baseline will be used by the Director, Office of Civilian Radioactive Waste Management (OCRWM), and his staff to monitor compliance with Program objectives. Chapter 1 includes brief discussions concerning the relationship of the PRSB to the Program Reference Cost Baseline (PRCB), the Mission Plan, the Project Decision Schedule, the Total System Life Cycle Cost report, the Program Management Information System report, the Program Milestone Review, annual budget preparation, and system element plans. Chapter 2 includes the identification of all Level 0, or Program-level, milestones, while Chapter 3 presents and discusses the critical path schedules that correspond to those Level 0 milestones

  15. Electrical engineer's reference book

    CERN Document Server

    Laughton, M A

    1985-01-01

    Electrical Engineer's Reference Book, Fourteenth Edition focuses on electrical engineering. The book first discusses units, mathematics, and physical quantities, including the international unit system, physical properties, and electricity. The text also looks at network and control systems analysis. The book examines materials used in electrical engineering. Topics include conducting materials, superconductors, silicon, insulating materials, electrical steels, and soft irons and relay steels. The text underscores electrical metrology and instrumentation, steam-generating plants, turbines

  16. Reference Sources in Chemistry

    OpenAIRE

    Sthapit, Dilip Man

    1995-01-01

    Information plays an important role in the development of every field. Therefore a brief knowledge regarding information sources is necessary to function in any field. There are many information sources about scientific and technical subjects. In this context there are many reference sources in Chemistry too. Chemistry is one important part of the science which deals with the study of the composition of substances and the chemical changes that they undergo. The purpose of this report is...

  17. Radioactive certified reference materials

    International Nuclear Information System (INIS)

    Watanabe, Kazuo

    2010-01-01

    Outline of radioactive certified reference materials (CRM) for the analysis of nuclear materials and radioactive nuclides were described. The nuclear fuel CRMs are supplied by the three institutes: NBL in the US, CETAMA in France and IRMM in Belgium. For the RI CRMs, the Japan Radioisotope Association is engaged in activities concerning supply. The natural-matrix CRMs for the analysis of trace levels of radio-nuclides are prepared and supplied by NIST in the US and the IAEA. (author)

  18. Reference Japanese man

    International Nuclear Information System (INIS)

    Tanaka, G.-I.; Kawamura, H.; Nakahara, Y.

    1979-01-01

    The weight of organs from autopsy cases of normal Japanese adults, children, and infants is presented for the purpose of approaching a Reference Japanese Man. The skeletal content and the daily intake of alkaline earth elements are given. A lower rate of transfer (K 2 ) to the thyroid gland of ingested radioiodine, as well as a remarkably shorter biological half-life than the data adopted by ICRP, is also proved as a result of this study. (author)

  19. Reference handbook: Level detectors

    International Nuclear Information System (INIS)

    1990-01-01

    The purpose of this handbook is to provide Rocky Flats personnel with the information necessary to understand level measurement and detection. Upon completion of this handbook you should be able to do the following: List three reasons for measuring level. Describe the basic operating principles of the sight glass. Demonstrate proper techniques for reading a sight glass. Describe the basic operating principles of a float level detector. Describe the basic operating principles of a bubbler level indicating system. Explain the differences between a wet and dry reference leg indicating system, and describe how each functions. This handbook is designed for use by experienced Rocky Flats operators to reinforce and improve their current knowledge level, and by entry-level operators to ensure that they possess a minimum level of fundamental knowledge. Level Detectors is applicable to many job classifications and can be used as a reference for classroom work or for self-study. Although this reference handbook is by no means all-encompassing, you will gain enough information about this subject area to assist you in contributing to the safe operation of Rocky Flats Plant

  20. Electroacoustical reference data

    CERN Document Server

    Eargle, John M

    2002-01-01

    The need for a general collection of electroacoustical reference and design data in graphical form has been felt by acousticians and engineers for some time. This type of data can otherwise only be found in a collection of handbooks. Therefore, it is the author's intention that this book serve as a single source for many electroacoustical reference and system design requirements. In form, the volume closely resembles Frank Massa's Acoustic Design Charts, a handy book dating from 1942 that has long been out of print. The basic format of Massa's book has been followed here: For each entry, graphical data are presented on the right page, while text, examples, and refer­ ences appear on the left page. In this manner, the user can solve a given problem without thumbing from one page to the next. All graphs and charts have been scaled for ease in data entry and reading. The book is divided into the following sections: A. General Acoustical Relationships. This section covers the behavior of sound transmis­ sion in...

  1. Design tools

    Science.gov (United States)

    Anton TenWolde; Mark T. Bomberg

    2009-01-01

    Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

  2. Instrumentation reference book

    CERN Document Server

    Boyes, Walt

    2002-01-01

    Instrumentation is not a clearly defined subject, having a 'fuzzy' boundary with a number of other disciplines. Often categorized as either 'techniques' or 'applications' this book addresses the various applications that may be needed with reference to the practical techniques that are available for the instrumentation or measurement of a specific physical quantity or quality. This makes it of direct interest to anyone working in the process, control and instrumentation fields where these measurements are essential.* Comprehensive and authoritative collection of technical information* Writte

  3. Electronics engineer's reference book

    CERN Document Server

    Mazda, F F

    1989-01-01

    Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

  4. International Geomagnetic Reference Field

    DEFF Research Database (Denmark)

    Finlay, Chris; Maus, S.; Beggan, C. D.

    2010-01-01

    The eleventh generation of the International Geomagnetic Reference Field (IGRF) was adopted in December 2009 by the International Association of Geomagnetism and Aeronomy Working Group V‐MOD. It updates the previous IGRF generation with a definitive main field model for epoch 2005.0, a main field...... model for epoch 2010.0, and a linear predictive secular variation model for 2010.0–2015.0. In this note the equations defining the IGRF model are provided along with the spherical harmonic coefficients for the eleventh generation. Maps of the magnetic declination, inclination and total intensity...

  5. Mechanical engineer's reference book

    CERN Document Server

    Parrish, A

    1973-01-01

    Mechanical Engineer's Reference Book: 11th Edition presents a comprehensive examination of the use of Systéme International d' Unités (SI) metrication. It discusses the effectiveness of such a system when used in the field of engineering. It addresses the basic concepts involved in thermodynamics and heat transfer. Some of the topics covered in the book are the metallurgy of iron and steel; screw threads and fasteners; hole basis and shaft basis fits; an introduction to geometrical tolerancing; mechanical working of steel; high strength alloy steels; advantages of making components as castings

  6. VBScript pocket reference

    CERN Document Server

    Lomax, Paul; Petrusha, Ron

    2008-01-01

    Microsoft's Visual Basic Scripting Edition (VBScript), a subset of Visual Basic for Applications, is a powerful language for Internet application development, where it can serve as a scripting language for server-side, client-side, and system scripting. Whether you're developing code for Active Server Pages, client-side scripts for Internet Explorer, code for Outlook forms, or scripts for Windows Script Host, VBScript Pocket Reference will be your constant companion. Don't let the pocket-friendly format fool you. Based on the bestsellingVBScript in a Nutshell, this small book details every V

  7. Xcode 5 developer reference

    CERN Document Server

    Wentk, Richard

    2014-01-01

    Design, code, and build amazing apps with Xcode 5 Thanks to Apple's awesome Xcode development environment, you can create the next big app for Macs, iPhones, iPads, or iPod touches. Xcode 5 contains gigabytes of great stuff to help you develop for both OS X and iOS devices - things like sample code, utilities, companion applications, documentation, and more. And with Xcode 5 Developer Reference, you now have the ultimate step-by-step guide to it all. Immerse yourself in the heady and lucrative world of Apple app development, see how to tame the latest features and functions, and find loads of

  8. NUnit Pocket Reference

    CERN Document Server

    Hamilton, Bill

    2009-01-01

    The open source NUnit framework is an excellent way to test .NET code as it is written, saving hundreds of QA hours and headaches. Unfortunately, some of those hours saved can be wasted trying to master this popular but under-documented framework. Proof that good things come in small packages, the NUnit Pocket Reference is everything you need to get NUnit up and working for you. It's the only book you'll need on this popular and practical new open source framework.

  9. Coal Data: A reference

    International Nuclear Information System (INIS)

    1991-01-01

    The purpose of Coal Data: A Reference is to provide basic information on the mining and use of coal, an important source of energy in the United States. The report is written for a general audience. The goal is to cover basic material and strike a reasonable compromise between overly generalized statements and detailed analyses. The section ''Coal Terminology and Related Information'' provides additional information about terms mentioned in the text and introduces new terms. Topics covered are US coal deposits, resources and reserves, mining, production, employment and productivity, health and safety, preparation, transportation, supply and stocks, use, coal, the environment, and more. (VC)

  10. Sustainability Tools Inventory - Initial Gaps Analysis | Science ...

    Science.gov (United States)

    This report identifies a suite of tools that address a comprehensive set of community sustainability concerns. The objective is to discover whether "gaps" exist in the tool suite’s analytic capabilities. These tools address activities that significantly influence resource consumption, waste generation, and hazard generation including air pollution and greenhouse gases. In addition, the tools have been evaluated using four screening criteria: relevance to community decision making, tools in an appropriate developmental stage, tools that may be transferrable to situations useful for communities, and tools with requiring skill levels appropriate to communities. This document provides an initial gap analysis in the area of community sustainability decision support tools. It provides a reference to communities for existing decision support tools, and a set of gaps for those wishing to develop additional needed tools to help communities to achieve sustainability. It contributes to SHC 1.61.4

  11. An overview of REARA reference design

    International Nuclear Information System (INIS)

    Menezes, A.

    1996-01-01

    In an effort to keep fast reactors as an option for an eventual future utilization in Brazil, the Advanced Studies Institute (IEAv) is coordinating a research project (called REARA, from the Portuguese REAtores RApidos (Fast Reactors)) which aims to establish a basic know-how in important aspects of fast reactor technology. A reference design for the primary circuit of a 60 MWt experimental fast reactor has been completed. Fuel pin dimensions and other data were taken mostly from PRISM and EBR-II and were used for calculations which lead to a general core configuration. The reference design is presently being used for testing our calculational tools, for checking different methodologies for core calculations, etc. The REARA reference design is presented, with emphasis in the main results and also in the contribution given by the project team in areas such as neutronics, thermohydraulics, etc. (author). 6 refs, 1 fig., 7 tabs

  12. Reference model for apparel product development

    Directory of Open Access Journals (Sweden)

    Isabel Cristina Moretti

    2017-03-01

    Full Text Available The purpose of this paper was to develop a reference model for the implementation of the process of product development (PDP for apparel. The tool was developed through an interactive process of comparison between theoretical. Managers in companies and professionals working in this market can utilize the reference model as a source for the organization and improvement of the PDP for apparel and the universities as a reference source for systematized teaching of this process. This model represents the first comprehensive attempt to develop an instrument at a detailed level (macro phases, phases, activities, inputs and outputs at each stage and at the gates to systematize the PDP process for fashion products and to consider its particularities.

  13. [The National Reference Centres and Reference Laboratories. Importance and tasks].

    Science.gov (United States)

    Laude, G; Ammon, A

    2005-09-01

    Since 1995, the German Federal Ministry for Health and Social Security funds National Reference Centres (NRC) for the laboratory surveillance of important pathogens and syndromes. Which pathogens or syndromes are selected to be covered by a NRC depends on their epidemiological relevance, the special diagnostic tools, problems with antimicrobial resistance and necessary infection control measures. Currently, there are 15 NRC, which are appointed for a period of 3 years (currently from January 2005 through December 2007). Towards the end of their appointment all NRC are evaluated by a group of specialists. The assessment of their achievements is guided by a catalogue of tasks for the NRC. In addition to the NRC, a total of 50 laboratories are appointed which provide specialist expertise for additional pathogens in order to have a broad range of pathogens for which specialist laboratories are available. Their predominant task is to give advice and support for special diagnostic problems. Both NRC and the specialist laboratories are important parts of the network for infectious disease epidemiology.

  14. Roaming Reference: Reinvigorating Reference through Point of Need Service

    Directory of Open Access Journals (Sweden)

    Kealin M. McCabe

    2011-11-01

    Full Text Available Roaming reference service was pursued as a way to address declining reference statistics. The service was staffed by librarians armed with iPads over a period of six months during the 2010-2011 academic year. Transactional statistics were collected in relation to query type (Research, Facilitative or Technology, location and approach (librarian to patron, patron to librarian or via chat widget. Overall, roaming reference resulted in an additional 228 reference questions, 67% (n=153 of which were research related. Two iterations of the service were implemented, roaming reference as a standalone service (Fall 2010 and roaming reference integrated with traditional reference desk duties (Winter 2011. The results demonstrate that although the Weller Library’s reference transactions are declining annually, they are not disappearing. For a roaming reference service to succeed, it must be a standalone service provided in addition to traditional reference services. The integration of the two reference models (roaming reference and reference desk resulted in a 56% decline in the total number of roaming reference questions from the previous term. The simple act of roaming has the potential to reinvigorate reference services as a whole, forcing librarians outside their comfort zones, allowing them to reach patrons at their point of need.

  15. AREVA - 2013 Reference document

    International Nuclear Information System (INIS)

    2014-01-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies, as well as estimates of the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the Reference Document; 2 - Statutory auditors; 3 - Selected financial information; 4 - Description of major risks confronting the company; 5 - Information about the issuer; 6 - Business overview; 7 - Organizational structure; 8 - Property, plant and equipment; 9 - Situation and activities of the company and its subsidiaries; 10 - Capital resources; 11 - Research and development programs, patents and licenses; 12 - Trend information; 13 - Profit forecasts or estimates; 14 - Management and supervisory bodies; 15 - Compensation and benefits; 16 - Functioning of the management and supervisory bodies; 17 - Human resources information; 18 - Principal shareholders; 19 - Transactions with related parties; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information; 22 - Major contracts; 23 - Third party information, statements by experts and declarations of interest; 24 - Documents on display; 25 - Information on holdings; Appendix 1: report of the supervisory board chairman on the preparation and organization of the board's activities and internal control procedures; Appendix 2: statutory auditors' reports; Appendix 3: environmental report; Appendix 4: non-financial reporting methodology and independent third-party report on social, environmental and societal data; Appendix 5: ordinary and extraordinary general shareholders' meeting; Appendix 6: values charter; Appendix 7: table of concordance of the management report; glossaries

  16. Balinese Frame of Reference

    Directory of Open Access Journals (Sweden)

    I Nyoman Aryawibawa

    2016-04-01

    Full Text Available Abstract: Balinese Frame of Reference. Wassmann and Dasen (1998 did a study on the acquisition of Balinese frames of reference. They pointed out that, in addition to the dominant use of absolute system, the use of relative system was also observed. This article aims at verifying Wassmann and Dasen’ study. Employing monolingual Balinese speakers and using linguistic and non-linguistic tasks, Aryawibawa (2010, 2012, 2015 showed that Balinese subjects used an absolute system dominantly in responding the two tasks, e.g. The man is north/south/east/west of the car. Unlike Wassmann and Dasen’s results, no relative system was used by the subjects in solving the tasks. Instead of the relative system, an intrinsic system was also observed in this study, even though it was unfrequent. The article concludes that the absolute system was dominantly employed by Balinese speakers in describing spatial relations in Balinese. The use of the system seems to affect their cognitive functions.

  17. Antares Reference Telescope System

    International Nuclear Information System (INIS)

    Viswanathan, V.K.; Kaprelian, E.; Swann, T.; Parker, J.; Wolfe, P.; Woodfin, G.; Knight, D.

    1983-01-01

    Antares is a 24-beam, 40-TW carbon-dioxide laser-fusion system currently nearing completion at the Los Alamos National Laboratory. The 24 beams will be focused onto a tiny target (typically 300 to 1000 μm in diameter) located approximately at the center of a 7.3-m-diameter by 9.3-m-long vacuum (10 - 6 torr) chamber. The design goal is to position the targets to within 10 μm of a selected nominal position, which may be anywhere within a fixed spherical region 1 cm in diameter. The Antares Reference Telescope System is intended to help achieve this goal for alignment and viewing of the various targets used in the laser system. The Antares Reference Telescope System consists of two similar electro-optical systems positioned in a near orthogonal manner in the target chamber area of the laser. Each of these consists of four subsystems: (1) a fixed 9X optical imaging subsystem which produces an image of the target at the vidicon; (2) a reticle projection subsystem which superimposes an image of the reticle pattern at the vidicon; (3) an adjustable front-lighting subsystem which illuminates the target; and (4) an adjustable back-lighting subsystem which also can be used to illuminate the target. The various optical, mechanical, and vidicon design considerations and trade-offs are discussed. The final system chosen (which is being built) and its current status are described in detail

  18. Sensor employing internal reference electrode

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention concerns a novel internal reference electrode as well as a novel sensing electrode for an improved internal reference oxygen sensor and the sensor employing same.......The present invention concerns a novel internal reference electrode as well as a novel sensing electrode for an improved internal reference oxygen sensor and the sensor employing same....

  19. Endogenizing Prospect Theory's Reference Point

    OpenAIRE

    Ulrich Schmidt; Horst Zank

    2010-01-01

    In previous models of (cumulative) prospect theory reference-dependence of preferences is imposed beforehand and the location of the reference point is exogenously determined. This note provides a foundation of prospect theory, where reference-dependence is derived from preference conditions and a unique reference point arises endogenously.

  20. Towards Automatic Testing of Reference Point Based Interactive Methods

    OpenAIRE

    Ojalehto, Vesa; Podkopaev, Dmitry; Miettinen, Kaisa

    2016-01-01

    In order to understand strengths and weaknesses of optimization algorithms, it is important to have access to different types of test problems, well defined performance indicators and analysis tools. Such tools are widely available for testing evolutionary multiobjective optimization algorithms. To our knowledge, there do not exist tools for analyzing the performance of interactive multiobjective optimization methods based on the reference point approach to communicating ...

  1. Cognitive Tools for Language Pedagogy.

    Science.gov (United States)

    Schoelles, Michael; Hamburger, Henry

    1996-01-01

    Discusses the integration of Fluent 2, a two-medium immersive conversational language learning environment, into the pedagogical environment. The article presents a strategy to provide teachers and other designers of language lessons with tools that will enable them to produce lessons they consider appropriate. (seven references) (Author/CK)

  2. Reference Value Advisor: a new freeware set of macroinstructions to calculate reference intervals with Microsoft Excel.

    Science.gov (United States)

    Geffré, Anne; Concordet, Didier; Braun, Jean-Pierre; Trumel, Catherine

    2011-03-01

    International recommendations for determination of reference intervals have been recently updated, especially for small reference sample groups, and use of the robust method and Box-Cox transformation is now recommended. Unfortunately, these methods are not included in most software programs used for data analysis by clinical laboratories. We have created a set of macroinstructions, named Reference Value Advisor, for use in Microsoft Excel to calculate reference limits applying different methods. For any series of data, Reference Value Advisor calculates reference limits (with 90% confidence intervals [CI]) using a nonparametric method when n≥40 and by parametric and robust methods from native and Box-Cox transformed values; tests normality of distributions using the Anderson-Darling test and outliers using Tukey and Dixon-Reed tests; displays the distribution of values in dot plots and histograms and constructs Q-Q plots for visual inspection of normality; and provides minimal guidelines in the form of comments based on international recommendations. The critical steps in determination of reference intervals are correct selection of as many reference individuals as possible and analysis of specimens in controlled preanalytical and analytical conditions. Computing tools cannot compensate for flaws in selection and size of the reference sample group and handling and analysis of samples. However, if those steps are performed properly, Reference Value Advisor, available as freeware at http://www.biostat.envt.fr/spip/spip.php?article63, permits rapid assessment and comparison of results calculated using different methods, including currently unavailable methods. This allows for selection of the most appropriate method, especially as the program provides the CI of limits. It should be useful in veterinary clinical pathology when only small reference sample groups are available. ©2011 American Society for Veterinary Clinical Pathology.

  3. AREVA 2009 reference document

    International Nuclear Information System (INIS)

    2009-01-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies. It contains information on the markets, market shares and competitive position of the AREVA group. This information provides an adequate picture of the size of these markets and of the AREVA group's competitive position. Content: 1 - Person responsible for the Reference Document and Attestation by the person responsible for the Reference Document; 2 - Statutory and Deputy Auditors; 3 - Selected financial information; 4 - Risks: Risk management and coverage, Legal risk, Industrial and environmental risk, Operating risk, Risk related to major projects, Liquidity and market risk, Other risk; 5 - Information about the issuer: History and development, Investments; 6 - Business overview: Markets for nuclear power and renewable energies, AREVA customers and suppliers, Overview and strategy of the group, Business divisions, Discontinued operations: AREVA Transmission and Distribution; 7 - Organizational structure; 8 - Property, plant and equipment: Principal sites of the AREVA group, Environmental issues that may affect the issuer's; 9 - Analysis of and comments on the group's financial position and performance: Overview, Financial position, Cash flow, Statement of financial position, Events subsequent to year-end closing for 2009; 10 - Capital Resources; 11 - Research and development programs, patents and licenses; 12 -trend information: Current situation, Financial objectives; 13 - Profit forecasts or estimates; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of corporate bodies; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties: French state, CEA, EDF group; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information: Share capital, Certificate of incorporation and by-laws; 22 - Major

  4. Areva - 2016 Reference document

    International Nuclear Information System (INIS)

    2017-01-01

    Areva supplies high added-value products and services to support the operation of the global nuclear fleet. The company is present throughout the entire nuclear cycle, from uranium mining to used fuel recycling, including nuclear reactor design and operating services. Areva is recognized by utilities around the world for its expertise, its skills in cutting-edge technologies and its dedication to the highest level of safety. Areva's 36,000 employees are helping build tomorrow's energy model: supplying ever safer, cleaner and more economical energy to the greatest number of people. This Reference Document contains information on Areva's objectives, prospects and development strategies. It contains estimates of the markets, market shares and competitive position of Areva

  5. A reference tristimulus colorimeter

    Science.gov (United States)

    Eppeldauer, George P.

    2002-06-01

    A reference tristimulus colorimeter has been developed at NIST with a transmission-type silicon trap detector (1) and four temperature-controlled filter packages to realize the Commission Internationale de l'Eclairage (CIE) x(λ), y(λ) and z(λ) color matching functions (2). Instead of lamp standards, high accuracy detector standards are used for the colorimeter calibration. A detector-based calibration procedure is being suggested for tristimulus colorimeters wehre the absolute spectral responsivity of the tristimulus channels is determined. Then, color (spectral) correct and peak (amplitude) normalization are applied to minimize uncertainties caused by the imperfect realizations of the CIE functions. As a result of the corrections, the chromaticity coordinates of stable light sources with different spectral power distributions can be measured with uncertainties less than 0.0005 (k=1).

  6. Tank characterization reference guide

    International Nuclear Information System (INIS)

    De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J.; Simpson, B.C.

    1994-09-01

    Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research

  7. Areva, reference document 2006

    International Nuclear Information System (INIS)

    2006-01-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains information on the markets, market shares and competitive position of the AREVA group. Content: - 1 Person responsible for the reference document and persons responsible for auditing the financial statements; - 2 Information pertaining to the transaction (Not applicable); - 3 General information on the company and its share capital: Information on AREVA, on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; - 4 Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts, The principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development programs, intellectual property and trademarks, Risk and insurance; - 5 Assets - Financial position - Financial performance: Analysis of and comments on the group's financial position and performance, 2006 Human Resources Report, Environmental Report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA financial statements, Notes to the corporate financial statements; 6 - Corporate Governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Combined General Meeting of Shareholders of May 3, 2007; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2006, Outlook; 8 - Glossary; 9 - Table of concordance

  8. Areva reference document 2007

    International Nuclear Information System (INIS)

    2008-01-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains also information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the reference document and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction (not applicable); 3 - General information on the company and its share capital: Information on Areva, Information on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; 4 - Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts 140 Principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and Development programs, Intellectual Property and Trademarks, Risk and insurance; 5 - Assets financial position financial performance: Analysis of and comments on the group's financial position and performance, Human Resources report, Environmental report, Consolidated financial statements 2007, Notes to the consolidated financial statements, Annual financial statements 2007, Notes to the corporate financial statements; 6 - Corporate governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Ordinary General Meeting of Shareholders of April 17, 2008; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2007, Outlook; Glossary; table of concordance

  9. Diagnostic reference levels in medical imaging

    International Nuclear Information System (INIS)

    Rosenstein, M.

    2001-01-01

    The paper proposes additional advice to national or local authorities and the clinical community on the application of diagnostic reference levels as a practical tool to manage radiation doses to patients in diagnostic radiology and nuclear medicine. A survey was made of the various approaches that have been taken by authoritative bodies to establish diagnostic reference levels for medical imaging tasks. There are a variety of ways to implement the idea of diagnostic reference levels, depending on the medical imaging task of interest, the national or local state of practice and the national or local preferences for technical implementation. The existing International Commission on Radiological Protection (ICRP) guidance is reviewed, the survey information is summarized, a set of unifying principles is espoused and a statement of additional advice that has been proposed to ICRP Committee 3 is presented. The proposed advice would meet a need for a unifying set of principles to provide a framework for diagnostic reference levels but would allow flexibility in their selection and use. While some illustrative examples are given, the proposed advice does not specify the specific quantities to be used, the numerical values to be set for the quantities or the technical details of how national or local authorities should implement diagnostic reference levels. (author)

  10. AREVA - 2012 Reference document

    International Nuclear Information System (INIS)

    2013-03-01

    After a presentation of the person responsible for this Reference Document, of statutory auditors, and of a summary of financial information, this report address the different risk factors: risk management and coverage, legal risk, industrial and environmental risk, operational risk, risk related to major projects, liquidity and market risk, and other risks (related to political and economic conditions, to Group's structure, and to human resources). The next parts propose information about the issuer, a business overview (markets for nuclear power and renewable energies, customers and suppliers, group's strategy, operations), a brief presentation of the organizational structure, a presentation of properties, plants and equipment (principal sites, environmental issues which may affect these items), analysis and comments on the group's financial position and performance, a presentation of capital resources, a presentation of research and development activities (programs, patents and licenses), a brief description of financial objectives and profit forecasts or estimates, a presentation of administration, management and supervision bodies, a description of the operation of corporate bodies, an overview of personnel, of principal shareholders, and of transactions with related parties, a more detailed presentation of financial information concerning assets, financial positions and financial performance. Addition information regarding share capital is given, as well as an indication of major contracts, third party information, available documents, and information on holdings

  11. Reference thorium fuel cycle

    International Nuclear Information System (INIS)

    Driggers, F.E.

    1978-08-01

    In the reference fuel cycle for the TFCT program, fissile U will be denatured by mixing with 238 U; the plants will be located in secure areas, with Pu being recycled within these secure areas; Th will be recycled with recovered U and Pu; the head end will handle a variety of core and blanket fuel assembly designs for LWRs and HWRs; the fuel may be a homogeneous mixture either of U and Th oxide pellets or sol-gel microspheres; the cladding will be Zircaloy; and MgO may be added to the fuel to improve Th dissolution. Th is being considered as the fertile component of fuel in order to increase proliferation resistance. Spent U recovered from Th-based fuels must be re-enriched before recycle to prevent very rapid buildup of 238 U. Stainless steel will be considered as a backup to Zircaloy cladding in case Zr is incompatible with commercial aqueous dissolution. Storage of recovered irradiated Th will be considered as a backup to its use in the recycle of recovered Pu and U. Estimates are made of the time for introducing the Th fuel cycle into the LWR power industry. Since U fuel exposures in LWRs are likely to increase from 30,000 to 50,000 MWD/MT, the Th reprocessing plant should also be designed for Th fuel with 50,000 MWD/MT exposure

  12. Sensor Characteristics Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

    2013-04-01

    The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

  13. Uranium tailings reference materials

    International Nuclear Information System (INIS)

    Smith, C.W.; Steger, H.F.; Bowman, W.S.

    1984-01-01

    Samples of uranium tailings from Bancroft and Elliot Lake, Ontario, and from Beaverlodge and Rabbit Lake, Saskatchewan, have been prepared as compositional reference materials at the request of the National Uranium Tailings Research Program. The four samples, UTS-1 to UTS-4, were ground to minus 104 μm, each mixed in one lot and bottled in 200-g units for UTS-1 to UTS-3 and in 100-g units for UTS-4. The materials were tested for homogeneity with respect to uranium by neutron activation analysis and to iron by an acid-decomposition atomic absorption procedure. In a free choice analytical program, 18 laboratories contributed results for one or more of total iron, titanium, aluminum, calcium, barium, uranium, thorium, total sulphur, and sulphate for all four samples, and for nickel and arsenic in UTS-4 only. Based on a statistical analysis of the data, recommended values were assigned to all elements/constituents, except for sulphate in UTS-3 and nickel in UTS-4. The radioactivity of thorium-230, radium-226, lead-210, and polonium-210 in UTS-1 to UTS-4 and of thorium-232, radium-228, and thorium-228 in UTS-1 and UTS-2 was determined in a radioanalytical program composed of eight laboratories. Recommended values for the radioactivities and associated parameters were calculated by a statistical treatment of the results

  14. Machine Translation Tools - Tools of The Translator's Trade

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2012-01-01

    In this article three of the more common types of translation tools are presented, discussed and critically evaluated. The types of translation tools dealt with in this article are: Fully Automated Machine Translation (or FAMT), Human Aided Machine Translation (or HAMT) and Machine Aided Human...... Translation (or MAHT). The strengths and weaknesses of the different types of tools are discussed and evaluated by means of a number of examples. The article aims at two things: at presenting a sort of state of the art of what is commonly referred to as “machine translation” as well as at providing the reader...... with a sound basis for considering what translation tool (if any) is the most appropriate in order to meet his or her specific translation needs....

  15. ENRAF gauge reference level calculations

    Energy Technology Data Exchange (ETDEWEB)

    Huber, J.H., Fluor Daniel Hanford

    1997-02-06

    This document describes the method for calculating reference levels for Enraf Series 854 Level Detectors as installed in the tank farms. The reference level calculation for each installed level gauge is contained herein.

  16. Global Reference Tables Services Architecture

    Data.gov (United States)

    Social Security Administration — This database stores the reference and transactional data used to provide a data-driven service access method to certain Global Reference Table (GRT) service tables.

  17. Genetics Home Reference: PURA syndrome

    Science.gov (United States)

    ... TJ, Vreeburg M, Rouhl RPW, Stevens SJC, Stegmann APA, Schieving J, Pfundt R, van Dijk K, Smeets ... article on PubMed Central More from Genetics Home Reference Bulletins Genetics Home Reference Celebrates Its 15th Anniversary ...

  18. Verification of Simulation Tools

    International Nuclear Information System (INIS)

    Richard, Thierry

    2015-01-01

    Before qualifying a simulation tool, the requirements shall first be clearly identified, i.e.: - What type of study needs to be carried out? - What phenomena need to be modeled? This phase involves writing a precise technical specification. Once the requirements are defined, the most adapted product shall be selected from the various software options available on the market. Before using a particular version of a simulation tool to support the demonstration of nuclear safety studies, the following requirements shall be met. - An auditable quality assurance process complying with development international standards shall be developed and maintained, - A process of verification and validation (V and V) shall be implemented. This approach requires: writing a report and/or executive summary of the V and V activities, defining a validated domain (domain in which the difference between the results of the tools and those of another qualified reference is considered satisfactory for its intended use). - Sufficient documentation shall be available, - A detailed and formal description of the product (software version number, user configuration, other settings and parameters) in the targeted computing environment shall be available. - Source codes corresponding to the software shall be archived appropriately. When these requirements are fulfilled, the version of the simulation tool shall be considered qualified for a defined domain of validity, in a given computing environment. The functional verification shall ensure that: - the computer architecture of the tool does not include errors, - the numerical solver correctly represents the physical mathematical model, - equations are solved correctly. The functional verification can be demonstrated through certification or report of Quality Assurance. The functional validation shall allow the user to ensure that the equations correctly represent the physical phenomena in the perimeter of intended use. The functional validation can

  19. Areva - 2014 Reference document

    International Nuclear Information System (INIS)

    2015-01-01

    Areva supplies high added-value products and services to support the operation of the global nuclear fleet. The company is present throughout the entire nuclear cycle, from uranium mining to used fuel recycling, including nuclear reactor design and operating services. Areva is recognized by utilities around the world for its expertise, its skills in cutting-edge technologies and its dedication to the highest level of safety. Areva's 44,000 employees are helping build tomorrow's energy model: supplying ever safer, cleaner and more economical energy to the greatest number of people. This Reference Document contains information on Areva's objectives, prospects and development strategies. It contains estimates of the markets, market shares and competitive position of Areva. Contents: 1 - Person responsible; 2 - Statutory auditors; 3 - Selected financial information; 4 - Risk factors; 5 - Information about the issuer; 6 - Business overview; 7 - Organizational structure; 8 - Property, plant and equipment; 9 - Analysis of and comments on the group's financial position and performance; 10 - Capital resources; 11 - Research and development programs, patents and licenses; 12 - Trend information; 13 - Profit forecasts; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of administrative, management and supervisory bodies and senior management; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information; 22 - Major contracts; 23 - Third party information, statements by experts and declarations of interest; 24 - Documents on display; 25 - information on holdings; appendix: Report of the Chairman of the Board of Directors on governance, internal control procedures and risk management, Statutory Auditors' report, Corporate social

  20. Computer-Aided Modelling Methods and Tools

    DEFF Research Database (Denmark)

    Cameron, Ian; Gani, Rafiqul

    2011-01-01

    The development of models for a range of applications requires methods and tools. In many cases a reference model is required that allows the generation of application specific models that are fit for purpose. There are a range of computer aided modelling tools available that help to define the m...

  1. BUILDING PATIENT LOYALTY USING ONLINE TOOLS

    Directory of Open Access Journals (Sweden)

    Vladoi Anca Daniela

    2010-07-01

    Full Text Available The aim of the paper is to present the online tools used by private healthcare organizations in order to generate patient loyalty. The research emphases a comparative analyze between the Romanian and other European countries private healthcare organizations referring to online tools used by these organizations on their websites to generate patient loyalty.

  2. Kerlinger's Criterial Referents Theory Revisited.

    Science.gov (United States)

    Zak, Itai; Birenbaum, Menucha

    1980-01-01

    Kerlinger's criterial referents theory of attitudes was tested cross-culturally by administering an education attitude referents summated-rating scale to 713 individuals in Israel. The response pattern to criterial and noncriterial referents was examined. Results indicated empirical cross-cultural validity of theory, but questioned measuring…

  3. Fundamentals of Managing Reference Collections

    Science.gov (United States)

    Singer, Carol A.

    2012-01-01

    Whether a library's reference collection is large or small, it needs constant attention. Singer's book offers information and insight on best practices for reference collection management, no matter the size, and shows why managing without a plan is a recipe for clutter and confusion. In this very practical guide, reference librarians will learn:…

  4. Knowledge Management and Reference Services

    Science.gov (United States)

    Gandhi, Smiti

    2004-01-01

    Many corporations are embracing knowledge management (KM) to capture the intellectual capital of their employees. This article focuses on KM applications for reference work in libraries. It defines key concepts of KM, establishes a need for KM for reference services, and reviews various KM initiatives for reference services.

  5. The generation and management of references with the Online Mechanism for References - MORE

    Directory of Open Access Journals (Sweden)

    Proxério Manoel Felisberto

    2015-04-01

    Full Text Available The scientific production and the development of academic papers have their own formalities. In this paper, is sought seek from these formalities for the ones that refers to the way of granting merits to the authors of the works used in the theoretical basis, through quotations and references. The goal is to help users of libraries to generate and manage references using a web tool developed for this purpose. There are many applications, in desktop and web platforms, that could be used to do this task. However, some of them require the payment of an expensive license to be fully functional. Others offers free versions, but they are very limited and often do not generate references specified by ABNT. There are others that do not store the generate references for later use. In order to fill this gap, the Online Mechanism for References (MORE was developed and made available to the general public in the web. Even so, the fast technological advances combined with a high number of users demanded an update to the application, done recently. It is important to state that all the work was developed exclusively with proven and free to use technologies. Initially, sought up identified the main tools available to generate and manage references and which free technologies could be used to build interactive web applications. This paper briefly describes the reengineering process that MORE was submitted, its new structure, new requirements met and its expanded portfolio of features. Finally, the results achieved after the reengineering are compared to indicators of its previous version.

  6. Ludic Educational Game Creation Tool

    DEFF Research Database (Denmark)

    Vidakis, Nikolaos; Syntychakis, Efthimios; Kalafatis, Konstantinos

    2015-01-01

    This paper presents initial findings and ongoing work of the game creation tool, a core component of the IOLAOS(IOLAOS in ancient Greece was a divine hero famed for helping with some of Heracles’s labors.) platform, a general open authorable framework for educational and training games. The game...... creation tool features a web editor, where the game narrative can be manipulated, according to specific needs. Moreover, this tool is applied for creating an educational game according to a reference scenario namely teaching schoolers road safety. A ludic approach is used both in game creation and play....... Helping children staying safe and preventing serious injury on the roads is crucial. In this context, this work presents an augmented version of the IOLAOS architecture including an enhanced game creation tool and a new multimodality module. In addition presents a case study for creating educational games...

  7. Advancing development of a limit reference point estimator for sea turtles, and evaluating methods for applying local management to highly migratory species

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — SWFSC is developing tools for estimation of limit reference points for marine turtles. These tools are being applied initially to estimate a limit reference point...

  8. Department of Energy Construction Safety Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

  9. Mathematical tools for physicists

    International Nuclear Information System (INIS)

    Trigg, G.L.

    2005-01-01

    Mathematical Tools for Physisists is a unique collection of 18 review articles, each one written by a renowned expert of its field. Their professional style will be beneficial for advanced students as well as for the scientist at work. The first may find a comprehensive introduction while the latter use it as a quick reference. Great attention was paid to ensuring fast access to the information, and each carefully reviewed article includes a glossary of terms and a guide to further reading. The contributions range from fundamental methods right up to the latest applications, including: - Algebraic Methods - Analytic Methods - Fourier and Other Mathematical Transforms - Fractal Geometry - Geometrical Methods - Green's Functions - Group Theory - Mathematical Modeling - Monte Carlo Methods - Numerical Methods - Perturbation Methods - Quantum Computation - Quantum Logic - Special Functions - Stochastic Processes - Symmetries and Conservation Laws - Topology - Variational Methods. (orig.)

  10. Proposing a Hierarchical Utility Package with Reference to Mobile Advertising

    OpenAIRE

    Shalini N. Tripathi; Masood H. Siddiqui

    2011-01-01

    Mobile advertising is a powerful tool for direct and interactive marketing. However effective marketing requires examining consumers’ psyche. This study proposes a hierarchical utility package (in the consumers’ perception) with reference to mobile advertising, thus enhancing its acceptance. Confirmatory factor analysis revealed four consolidated utility dimensions (with reference to mobile advertising). Binary logistic regression was used to create a hierarchical utility package with res...

  11. User Preferences in Reference Services: Virtual Reference and Academic Libraries

    Science.gov (United States)

    Cummings, Joel; Cummings, Lara; Frederiksen, Linda

    2007-01-01

    This study examines the use of chat in an academic library's user population and where virtual reference services might fit within the spectrum of public services offered by academic libraries. Using questionnaires, this research demonstrates that many within the academic community are open to the idea of chat-based reference or using chat for…

  12. Java for dummies quick reference

    CERN Document Server

    Lowe, Doug

    2012-01-01

    A reference that answers your questions as you move through your coding The demand for Android programming and web apps continues to grow at an unprecedented pace and Java is the preferred language for both. Java For Dummies Quick Reference keeps you moving through your coding while you solve a problem, look up a command or syntax, or search for a programming tip. Whether you're a Java newbie or a seasoned user, this fast reference offers you quick access to solutions without requiring that you wade through pages of tutorial material. Leverages the true reference format that is organized with

  13. OMIRIS educational tool

    International Nuclear Information System (INIS)

    Dumont, X.; Artus, J.C.; Gonin, M.; Bidard, F.; Hickman, B.

    2004-01-01

    The biological effects of ionizing radiations are one of the most important issues for workers exposed to these radiations in nuclear plants. To deliver information to workers about this topic, the 'Utility Medical Work Officers' wanted an educational tool. This tool named 'OMIRIS' was prepared under the authority of the federation of professors in radiology, radiobiology and radioprotection and the industrial nuclear partners in France (ANDRA, AREVA/COGEMA and FRAMATOME-ANP, CEA and EDF). The use of animation techniques helps to present in a simple way this complex topic using an interactive, pleasant and comprehensible form. Detailed information is given about 5 themes: 1) the various sources of ionizing radiation whatever they are natural, medical, industrial or military; 2) the various types of exposure, whether internal or external, their characteristics: duration, target organs and radiological toxicity and the different means of protection; 3) the concept of dose, the importance of dose rate and the reference values of doses; 4) the biological effects on the human organism, notions of dose threshold and aims, results and limitations of epidemiological surveys; and 5) the regulation based on radiological protection studies

  14. Nuclear forensics support. Reference manual

    International Nuclear Information System (INIS)

    2006-01-01

    or Illicit Trafficking of Radioactive Material (IAEA-TECDOC-1313). It was quickly recognized that much can be learned from the analysis of reported cases of illicit trafficking. For example, what specifically could the material have been used for? Where was the material obtained: in stock, scrap or waste? Was the amount seized only a sample of a much more significant quantity? These and many other questions can be answered through detailed technical characterization of seized material samples. The combination of scientific methods used for this purpose is normally referred to as 'nuclear forensics', which has become an indispensable tool for use in law enforcement investigations of nuclear trafficking. This publication is based on a document entitled Model Action Plan for Nuclear Forensics and Nuclear Attribution (UCLR-TR-202675). The document is unique in that it brings together, for the first time, a concise but comprehensive description of the various tools and procedures of nuclear forensic investigations that was earlier available only in different areas of the scientific literature. It also has the merit of incorporating experience accumulated over the past decade by law enforcement agencies and nuclear forensics laboratories confronted with cases of illicit events involving nuclear or other radioactive material

  15. Moving Reference to the Web.

    Science.gov (United States)

    McGlamery, Susan; Coffman, Steve

    2000-01-01

    Explores the possibility of using Web contact center software to offer reference assistance to remote users. Discusses a project by the Metropolitan Cooperative Library System/Santiago Library System consortium to test contact center software and to develop a virtual reference network. (Author/LRW)

  16. Reference vectors in economic choice

    Directory of Open Access Journals (Sweden)

    Teycir Abdelghani GOUCHA

    2013-07-01

    Full Text Available In this paper the introduction of notion of reference vector paves the way for a combination of classical and social approaches in the framework of referential preferences given by matrix groups. It is shown that individual demand issue from rational decision does not depend on that reference.

  17. "In Your Face" Reference Service.

    Science.gov (United States)

    Lipow, Anne Grodzins

    1999-01-01

    Discusses changes in library reference service that have occurred with growing Internet use. Topics include the human factor that is still needed; the nature of reference questions; the goal of user self-sufficiency; the invisible nature of much of librarians' work; and providing real-time, interactive point-of-need service to remote users. (LRW)

  18. Technostress and the Reference Librarian.

    Science.gov (United States)

    Kupersmith, John

    1992-01-01

    Defines "technostress" as the stress experienced by reference librarians who must constantly deal with the demands of new information technology and the changes they produce in the work place. Discussion includes suggested ways in which both organizations and individuals can work to reduce stress. (27 references) (LAE)

  19. Reference Services: A Handmaid's Tale.

    Science.gov (United States)

    Beck, Clare

    1991-01-01

    Discussion of problems in library reference services focuses on the influence of gender roles. A historical overview of gender roles in the development of American librarianship is presented that highlights stereotyped views of and attitudes toward women, which the author suggests still have influences on librarianship today. (17 references) (LRW)

  20. Tool path in torus tool CNC machining

    Directory of Open Access Journals (Sweden)

    XU Ying

    2016-10-01

    Full Text Available This paper is about tool path in torus tool CNC machining.The mathematical model of torus tool is established.The tool path planning algorithm is determined through calculation of the cutter location,boundary discretization,calculation of adjacent tool path and so on,according to the conversion formula,the cutter contact point will be converted to the cutter location point and then these points fit a toolpath.Lastly,the path planning algorithm is implemented by using Matlab programming.The cutter location points for torus tool are calculated by Matlab,and then fit these points to a toolpath.While using UG software,another tool path of free surface is simulated of the same data.It is drew compared the two tool paths that using torus tool is more efficient.

  1. Installation procedures (IP) for the enhanced logistics intratheater support tool (ELIST) global data segment version 8.1.0.0, database instance segment version 8.1.0.0, ...[elided] and reference data segment version 8.1.0.0 for solaris 7.; TOPICAL

    International Nuclear Information System (INIS)

    Dritz, K.

    2002-01-01

    This document is the Installation Procedures (IP) for the DII COE Enhanced Logistics Intraheater Support Tool (ELIST) mission application. It tells how to install and deinstall the seven segments of the mission application

  2. Reference dosimetry for CT in the UK

    International Nuclear Information System (INIS)

    Shrimpton, P.C.; Wall, B.F.

    2001-01-01

    Computed tomography is firmly established as a major source of population exposure from diagnostic x-ray examinations and thus a particular focus for radiological protection initiatives. The concept of reference doses is widely recognised as a useful and practical tool for promoting improvements in the optimisation of protection for patients undergoing radiological examinations. National diagnostic reference levels (DRLs) have already been successfully applied in the UK for some conventional x-ray examinations within a framework for advice on patient protection. This approach is being extended to include CT, utilising the robust methodology for reference dosimetry that has been developed by the European Commission (EC) for the particular conditions of exposure in CT. This is based on the dosimetric concepts of weighted computed tomography dose index (CTDI w ) per slice in serial scanning or per rotation in helical scanning, and dose-length product (DLP) per complete examination. Notwithstanding some initial values proposed by the EC, specific national DRLs for CT practice in the UK will be established on the basis of widescale national survey data. (author)

  3. Reference-dependent preferences and loss aversion

    Directory of Open Access Journals (Sweden)

    Einat Neuman

    2008-02-01

    Full Text Available This study employs a Discrete Choice Experiment (DCE in the health-care sector to test the loss aversion theory that is derived from reference-dependent preferences: The absolute subjective value of a deviation from a reference point is generally greater when the deviation represents a loss than when the same-sized change is perceived as a gain. As far as is known, this paper is the first to use a DCE to test the loss aversion theory. A DCE is a highly suitable tool for such testing because it estimates the marginal valuations of attributes, based onextit{ deviations from a reference point} (a constant scenario. Moreover, loss aversion can be examined for extit{each attribute separately}. Another advantage of a DCE is that is can be applied toextit{ non-traded goods with non-tangible attributes}. A health-care event is used for empirical illustration: The loss aversion theory is tested within the context of preference structures for maternity-ward attributes, estimated using data gathered from 3850 observations made by a sample of 542 women who had recently given birth. Seven hypotheses are presented and tested. Overall, significant support for behavioral loss aversion theories was found. %JEL codes: D01, D12, I19

  4. Useful design tools?

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2005-01-01

    vague and contested concept of sustainability into concrete concepts and building projects. It describes a typology of tools: process tools, impact assessment tools, multi-criteria tools and tools for monitoring. It includes a Danish paradigmatic case study of stakeholder participation in the planning...... of a new sustainable settlement. The use of design tools is discussed in relation to innovation and stakeholder participation, and it is stressed that the usefulness of design tools is context dependent....

  5. NDT-Tool: A case tool to deal with requirements in web information systems

    OpenAIRE

    Escalona Cuaresma, María José; Torres Valderrama, Jesús; Mejías Risoto, Manuel

    2003-01-01

    Internet progress and the rising interest for developing systems in web environment has given way to several methodological proposals which have been proposed to be a suitable reference in the development process. However, there is a gap in case tool[3][4][6]. This work presents a case tool named NDT-Tool that allows to apply algorithms and techniques proposed in NDT (Navigational Development Techniques) [2], which is a methodological proposition to specify, analyze and desi...

  6. CoC GIS Tools (GIS Tool)

    Data.gov (United States)

    Department of Housing and Urban Development — This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through...

  7. References

    OpenAIRE

    2017-01-01

    Achinstein, P. 1983. The Nature of Explanation (Oxford: Oxford University Press). Adler, J.E. 1997. ‘Lying, Deceiving, or Falsely Implicating’, The Journal of Philosophy, 94: 435–52. Adler, J.E. 2002. Belief’s Own Ethics (Cambridge, MA: MIT Press). Alicke, M.D., J. Buckingham, E. Zell, & T. Davis. 2008. ‘Culpable Control and Counterfactual Reasoning in the Psychology of Blame’, Personality and Social Psychology Bulletin, 34: 1371–78, http://journals.sagepub.com/doi/abs/10.1177/014616720832159...

  8. References

    OpenAIRE

    2018-01-01

    Aldridge, H., Kenway, P. and Born, T. (2015), ‘What Happened to Poverty Under the Coalition’. New Policy Institute. Armour, R. (2014) ‘Charity Shops Buck Trend’, http://thirdforcenews.org.uk,24 March 2014. Beatty, C. and Fothergill, S. (2016), The Uneven Impact of Welfare Reform. The Financial Losses to Places and People, Centre for Regional and Social Economic Research and Sheffield Hallam University, https://www4.shu.ac.uk/research/cresr/sites/shu.ac.uk/files/welfare-reform-2016_1.pdf Belfi...

  9. References

    OpenAIRE

    2012-01-01

    Appiah, Kwame Anthony (2005) The Ethics of Identity, Princeton University Press, Princeton, NJ. ______ (2006). Cosmopolitanism: Ethics in a World of Strangers, Norton, New York. Clarke, Charles (2006) ‛Global Citizens and Quality International Education: Enlarging the Role of the Commonwealth’. Speech delivered to the Royal Commonwealth Society, 15 November, 2006, London. Estlund, Cynthia (2003) Working Together: How Workplace Bonds Strengthen a Diverse Democracy, Oxford University Press, New...

  10. References:

    African Journals Online (AJOL)

    brain drain”'. Globalization and Health 2006, 2:12 doi: 10.1186/1744-8603-2-12. 3. Zijlstra, E., Broadhead, R. 2007. The College of Medicine in the. Republic of Malawi: towards sustainable staff development, Human. Resources for Health 2007, ...

  11. Selecting a Web 2.0 Presentation Tool

    Science.gov (United States)

    Hodges, Charles B.; Clark, Kenneth

    2011-01-01

    Web-based presentation tools are sometimes referred to as "next generation presentation tools" (EDUCAUSE, 2010). At the most basic level, these tools are simply online versions of traditional presentation software, such as Microsoft's PowerPoint or Apple's Keynote, but some services offer features like web-based collaboration, online presentation…

  12. Japanese reference man 1988, 3

    International Nuclear Information System (INIS)

    Tanaka, Gi-ichiro

    1988-01-01

    Quantitative description of physical properties and other characteristics of the human body is one of the basic data for estimating dose equivalent and calculating Annual Limit on Intake of radionuclides. The exact mass weight of organs and tissues are measured from about 1000 autopsy cases of normal Japanese adults and physical properties are obtained from recent Japanese Government publications. Japanese (Asian) Reference Man is completed by establishing the Normal Japanese, harmonizing with Caucasian Reference Man and coinciding with the ICRP Reference Man Task Group members concept. (author)

  13. Reference task-based design of crisis management games

    NARCIS (Netherlands)

    Link, Daniel; Meesters, Kenny; Hellingrath, Bernd; van de Walle, B.A.; Hiltz, S.R.; Pfaff, M.S.; Plotnick, L.; Shih, P.C.

    Serious games are an effective tool for giving players a hands-on, immersive experience of crisis situations. To simplify the design of such games while ensuring their relevance, we propose a design method that is based on reference tasks. The feasibility of this approach is demonstrated by the

  14. Establishment of local Diagnostic Reference Levels (DRLs) for ...

    African Journals Online (AJOL)

    Diagnostic reference levels (DRLs) is an essential optimization tool in radiography and radiological sciences. The objective of the study is to establish DRL for radiography examinations in north eastern Nigeria. A Prospective cross- sectional study conducted in two university teaching hospitals in north eastern Nigeria.

  15. Nuclear measurements and reference materials

    International Nuclear Information System (INIS)

    1988-01-01

    This report summarizes the progress of the JRC programs on nuclear data, nuclear metrology, nuclear reference materials and non-nuclear reference materials. Budget restrictions and personnel difficulties were encountered during 1987. Fission properties of 235 U as a function of neutron energy and of the resonances can be successfully described on the basis of a three exit channel fission model. Double differential neutron emission cross-sections were accomplished on 7 Li and were started for the tritium production cross-section of 9 Be. Reference materials of uranium minerals and ores were prepared. Special nuclear targets were prepared. A batch of 250 g of Pu0 2 was characterized in view of certification as reference material for the elemental assay of plutonium

  16. Dietary Reference Values for choline

    DEFF Research Database (Denmark)

    Sjödin, Anders Mikael

    2016-01-01

    Following a request from the European Commission, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) derives Dietary Reference Values (DRVs) for choline. In this Opinion, the Panel considers dietary choline including choline compounds (e.g. glycerophosphocholine, phosphocholine...

  17. TclTk Pocket Reference

    CERN Document Server

    Raines, Paul

    1998-01-01

    The Tcl/Tk combination is increasingly popular because it lets you produce sophisticated graphical interfaces with a few easy commands, develop and change scripts quickly, and conveniently tie together existing utilities or programming libraries. The Tcl/Tk Pocket Reference,a handy reference guide to the basic Tcl language elements, Tcl and Tk commands, and Tk widgets, is a companion volume to Tcl/Tk in a Nutshell.

  18. Korean Reference HLW Disposal System

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heui Joo; Lee, J. Y.; Kim, S. S. (and others)

    2008-03-15

    This report outlines the results related to the development of Korean Reference Disposal System for High-level radioactive wastes. The research has been supported around for 10 years through a long-term research plan by MOST. The reference disposal method was selected via the first stage of the research during which the technical guidelines for the geological disposal of HLW were determined too. At the second stage of the research, the conceptual design of the reference disposal system was made. For this purpose the characteristics of the reference spent fuels from PWR and CANDU reactors were specified, and the material and specifications of the canisters were determined in term of structural analysis and manufacturing capability in Korea. Also, the mechanical and chemical characteristics of the domestic Ca-bentonite were analyzed in order to supply the basic design parameters of the buffer. Based on these parameters the thermal and mechanical analysis of the near-field was carried out. Thermal-Hydraulic-Mechanical behavior of the disposal system was analyzed. The reference disposal system was proposed through the second year research. At the final third stage of the research, the Korean Reference disposal System including the engineered barrier, surface facilities, and underground facilities was proposed through the performance analysis of the disposal system.

  19. The power tool

    International Nuclear Information System (INIS)

    HAYFIELD, J.P.

    1999-01-01

    POWER Tool--Planning, Optimization, Waste Estimating and Resourcing tool, a hand-held field estimating unit and relational database software tool for optimizing disassembly and final waste form of contaminated systems and equipment

  20. The citation with reference and the citation as a reference

    Directory of Open Access Journals (Sweden)

    Rafael Antonio Cunha Perrone

    2011-12-01

    Full Text Available O ensaio objetiva estabelecer paralelos entre a citação acadêmica e a citação utilizada como referência, para a produção das obras ou projetos de arquitetura. O artigo discute o uso de figuras paradigmáticas ou significativas, transladadas ou amalgamadas nas obras de arquitetura, a partir do entendimento da citação como dado argumentativo e qualitativo. Investiga algumas de suas assimetrias e congruências em sua utilização na linguagem escrita, como transcrição direta ou como fonte interpretativa, reelaborada e incorporada como argumento em outro texto. Pondera que no ensinar, estudar e fazer arquitetura é preciso saber citar com referência, para poder citar como referência.

  1. The neutron porosity tool

    International Nuclear Information System (INIS)

    Oelgaard, P.L.

    1988-01-01

    The report contains a review of available information on neutron porosity tools with the emphasis on dual thermal-neutron-detector porosity tools and epithermal-neutron-detector porosity tools. The general principle of such tools is discussed and theoretical models are very briefly reviewed. Available data on tool designs are summarized with special regard to the source-detector distance. Tool operational data, porosity determination and correction of measurements are briefly discussed. (author) 15 refs

  2. Sequence Factorization with Multiple References.

    Directory of Open Access Journals (Sweden)

    Sebastian Wandelt

    Full Text Available The success of high-throughput sequencing has lead to an increasing number of projects which sequence large populations of a species. Storage and analysis of sequence data is a key challenge in these projects, because of the sheer size of the datasets. Compression is one simple technology to deal with this challenge. Referential factorization and compression schemes, which store only the differences between input sequence and a reference sequence, gained lots of interest in this field. Highly-similar sequences, e.g., Human genomes, can be compressed with a compression ratio of 1,000:1 and more, up to two orders of magnitude better than with standard compression techniques. Recently, it was shown that the compression against multiple references from the same species can boost the compression ratio up to 4,000:1. However, a detailed analysis of using multiple references is lacking, e.g., for main memory consumption and optimality. In this paper, we describe one key technique for the referential compression against multiple references: The factorization of sequences. Based on the notion of an optimal factorization, we propose optimization heuristics and identify parameter settings which greatly influence 1 the size of the factorization, 2 the time for factorization, and 3 the required amount of main memory. We evaluate a total of 30 setups with a varying number of references on data from three different species. Our results show a wide range of factorization sizes (optimal to an overhead of up to 300%, factorization speed (0.01 MB/s to more than 600 MB/s, and main memory usage (few dozen MB to dozens of GB. Based on our evaluation, we identify the best configurations for common use cases. Our evaluation shows that multi-reference factorization is much better than single-reference factorization.

  3. Reference Librarian in Digital Environment:

    Directory of Open Access Journals (Sweden)

    Faramarz Sohili

    2008-07-01

    Full Text Available The information explosion of the latter half of the twentieth century, gave rise to online databases and various information media that gradually impacted on the very physical environment of the library. It transformed the librarians’ role. Reference librarians are no exception. The present study aims to investigate the need or lack of need to reference librarians within the digital domains based on the views expressed by LIS authorities in Iran. It would attempt further, to identify the qualities required for such librarian should a need for her/his expressed. The research, while descriptive in nature, was based on analyzing the results obtained by the checklist devised by the authors. LIS Specialist sample was composed of 57 people who filled the checklist. Findings show that there is a significance between employing ICT and need for a reference librarian. LIS experts in Iran believe that introduction of ICT, especially Internet and the WWW not only didn’t decrease the need for such librarians, but has caused the reference librarian to attain a more important and better status than before. Findings further demonstrated that while Iran is not a signatory to the international copyright conventions, the Iranian reference librarians are fully committed to observing author’s copyright and intellectual rights and frown on using software crackers.

  4. An ultra-precision tool nanoindentation instrument for replication of single point diamond tool cutting edges

    Science.gov (United States)

    Cai, Yindi; Chen, Yuan-Liu; Xu, Malu; Shimizu, Yuki; Ito, So; Matsukuma, Hiraku; Gao, Wei

    2018-05-01

    Precision replication of the diamond tool cutting edge is required for non-destructive tool metrology. This paper presents an ultra-precision tool nanoindentation instrument designed and constructed for replication of the cutting edge of a single point diamond tool onto a selected soft metal workpiece by precisely indenting the tool cutting edge into the workpiece surface. The instrument has the ability to control the indentation depth with a nanometric resolution, enabling the replication of tool cutting edges with high precision. The motion of the diamond tool along the indentation direction is controlled by the piezoelectric actuator of a fast tool servo (FTS). An integrated capacitive sensor of the FTS is employed to detect the displacement of the diamond tool. The soft metal workpiece is attached to an aluminum cantilever whose deflection is monitored by another capacitive sensor, referred to as an outside capacitive sensor. The indentation force and depth can be accurately evaluated from the diamond tool displacement, the cantilever deflection and the cantilever spring constant. Experiments were carried out by replicating the cutting edge of a single point diamond tool with a nose radius of 2.0 mm on a copper workpiece surface. The profile of the replicated tool cutting edge was measured using an atomic force microscope (AFM). The effectiveness of the instrument in precision replication of diamond tool cutting edges is well-verified by the experimental results.

  5. Virtual Reference, Real Money: Modeling Costs in Virtual Reference Services

    Science.gov (United States)

    Eakin, Lori; Pomerantz, Jeffrey

    2009-01-01

    Libraries nationwide are in yet another phase of belt tightening. Without an understanding of the economic factors that influence library operations, however, controlling costs and performing cost-benefit analyses on services is difficult. This paper describes a project to develop a cost model for collaborative virtual reference services. This…

  6. JavaScript programmer's reference

    CERN Document Server

    Valentine, Thomas

    2013-01-01

    JavaScript Programmer's Reference is an invaluable resource that won't stray far from your desktop (or your tablet!). It contains detailed information on every JavaScript object and command, and combines that reference with practical examples showcasing how you can use those commands in the real world. Whether you're just checking the syntax of a method or you're starting out on the road to JavaScript mastery, the JavaScript Programmer's Reference will be an essential aid.  With a detailed and informative tutorial section giving you the ins and outs of programming with JavaScript and the DOM f

  7. Haemostatic reference intervals in pregnancy

    DEFF Research Database (Denmark)

    Szecsi, Pal Bela; Jørgensen, Maja; Klajnbard, Anna

    2010-01-01

    largely unchanged during pregnancy, delivery, and postpartum and were within non-pregnant reference intervals. However, levels of fibrinogen, D-dimer, and coagulation factors VII, VIII, and IX increased markedly. Protein S activity decreased substantially, while free protein S decreased slightly and total......Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age......-20, 21-28, 29-34, 35-42, at active labor, and on postpartum days 1 and 2. Reference intervals for each gestational period using only the uncomplicated pregnancies were calculated in all 391 women for activated partial thromboplastin time (aPTT), fibrinogen, fibrin D-dimer, antithrombin, free protein S...

  8. Certified reference materials and reference methods for nuclear safeguards and security.

    Science.gov (United States)

    Jakopič, R; Sturm, M; Kraiem, M; Richter, S; Aregbe, Y

    2013-11-01

    Confidence in comparability and reliability of measurement results in nuclear material and environmental sample analysis are established via certified reference materials (CRMs), reference measurements, and inter-laboratory comparisons (ILCs). Increased needs for quality control tools in proliferation resistance, environmental sample analysis, development of measurement capabilities over the years and progress in modern analytical techniques are the main reasons for the development of new reference materials and reference methods for nuclear safeguards and security. The Institute for Reference Materials and Measurements (IRMM) prepares and certifices large quantities of the so-called "large-sized dried" (LSD) spikes for accurate measurement of the uranium and plutonium content in dissolved nuclear fuel solutions by isotope dilution mass spectrometry (IDMS) and also develops particle reference materials applied for the detection of nuclear signatures in environmental samples. IRMM is currently replacing some of its exhausted stocks of CRMs with new ones whose specifications are up-to-date and tailored for the demands of modern analytical techniques. Some of the existing materials will be re-measured to improve the uncertainties associated with their certified values, and to enable laboratories to reduce their combined measurement uncertainty. Safeguards involve the quantitative verification by independent measurements so that no nuclear material is diverted from its intended peaceful use. Safeguards authorities pay particular attention to plutonium and the uranium isotope (235)U, indicating the so-called 'enrichment', in nuclear material and in environmental samples. In addition to the verification of the major ratios, n((235)U)/n((238)U) and n((240)Pu)/n((239)Pu), the minor ratios of the less abundant uranium and plutonium isotopes contain valuable information about the origin and the 'history' of material used for commercial or possibly clandestine purposes, and

  9. Considerations for reference pump curves

    International Nuclear Information System (INIS)

    Stockton, N.B.

    1992-01-01

    This paper examines problems associated with inservice testing (IST) of pumps to assess their hydraulic performance using reference pump curves to establish acceptance criteria. Safety-related pumps at nuclear power plants are tested under the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (the Code), Section 11. The Code requires testing pumps at specific reference points of differential pressure or flow rate that can be readily duplicated during subsequent tests. There are many cases where test conditions cannot be duplicated. For some pumps, such as service water or component cooling pumps, the flow rate at any time depends on plant conditions and the arrangement of multiple independent and constantly changing loads. System conditions cannot be controlled to duplicate a specific reference value. In these cases, utilities frequently request to use pump curves for comparison of test data for acceptance. There is no prescribed method for developing a pump reference curve. The methods vary and may yield substantially different results. Some results are conservative when compared to the Code requirements; some are not. The errors associated with different curve testing techniques should be understood and controlled within reasonable bounds. Manufacturer's pump curves, in general, are not sufficiently accurate to use as reference pump curves for IST. Testing using reference curves generated with polynomial least squares fits over limited ranges of pump operation, cubic spline interpolation, or cubic spline least squares fits can provide a measure of pump hydraulic performance that is at least as accurate as the Code required method. Regardless of the test method, error can be reduced by using more accurate instruments, by correcting for systematic errors, by increasing the number of data points, and by taking repetitive measurements at each data point

  10. rf reference line for PEP

    International Nuclear Information System (INIS)

    Schwarz, H.D.; Weaver, J.N.

    1979-03-01

    A rf phase reference line in 6 segments around the 2200 meter circumference PEP storage ring is described. Each segment of the reference line is phase stabilized by its own independent feedback system, which uses an amplitude modulated reflection from the end of each line. The modulation is kept small and decoupled from the next segment to avoid crosstalk and significant modulation of the rf drive signal. An error evaluation of the system is made. The technical implementation and prototype performance are described. Prototype tests indicate that the phase error around the ring can be held below 1 degree with this relatively simple system

  11. Dietary reference values for thiamin

    DEFF Research Database (Denmark)

    Sjödin, Anders Mikael

    2016-01-01

    Following a request from the European Commission, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) derived dietary reference values (DRVs) for thiamin (vitamin B1). The Panel considers that data from depletion–repletion studies in adults on the amount of dietary thiamin intake...... were measured. Results from other depletion–repletion studies are in agreement with this value. The Panel agrees on the coefficient of variation of 20% used by the SCF to cover uncertainties related to distribution of thiamin requirements in the general population, and endorses the population reference...

  12. Sizewell 'B' PWR reference design

    International Nuclear Information System (INIS)

    1982-04-01

    The reference design for a PWR power station to be constructed as Sizewell 'B' is presented in 3 volumes containing 14 chapters and in a volume of drawings. The report describes the proposed design and provides the basis upon which the safety case and the Pre-Construction Safety Report have been prepared. The station is based on a 3425MWt Westinghouse PWR providing steam to two turbine generators each of 600 MW. The layout and many of the systems are based on the SNUPPS design for Callaway which has been chosen as the US reference plant for the project. (U.K.)

  13. Electrical engineering a pocket reference

    CERN Document Server

    Schmidt-Walter, Heinz

    2007-01-01

    This essential reference offers you a well-organized resource for accessing the basic electrical engineering knowledge you need for your work. Whether you're an experienced engineer who appreciates an occasional refresher in key areas, or a student preparing to enter the field, Electrical Engineering: A Pocket Reference provides quick and easy access to fundamental principles and their applications. You also find an extensive collection of time-saving equations that help simplify your daily projects.Supported with more than 500 diagrams and figures, 60 tables, and an extensive index, this uniq

  14. Perl/Tk Pocket Reference

    CERN Document Server

    Lidie, Stephen

    1998-01-01

    The Perl/Tk Pocket Reference is a companion volume to Learning Perl/Tk, an O'Reilly Animal Guide. Learning Perl/Tk is a tutorial for Perl/Tk, the extension to Perl for creating graphical user interfaces. With Tk, Perl programs can be window-based rather than command-line based, with buttons, entry fields, listboxes, menus, scrollbars, balloons, tables, dialogs, and more. And Perl/Tk programs run on UNIX and Windows-based computers. This small book is a handy reference guide geared toward the advanced Perl/Tk programmer. Novice Perl/Tk programmers will find that its compact size gives th

  15. rf reference line for PEP

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, H.D.; Weaver, J.N.

    1979-03-01

    A rf phase reference line in 6 segments around the 2200 meter circumference PEP storage ring is described. Each segment of the reference line is phase stabilized by its own independent feedback system, which uses an amplitude modulated reflection from the end of each line. The modulation is kept small and decoupled from the next segment to avoid crosstalk and significant modulation of the rf drive signal. An error evaluation of the system is made. The technical implementation and prototype performance are described. Prototype tests indicate that the phase error around the ring can be held below 1 degree with this relatively simple system.

  16. Reference data about petroleum fiscality

    International Nuclear Information System (INIS)

    2006-01-01

    This paper explains the different taxes existing in France for the petroleum products (domestic tax on petroleum products, added-value tax), the share of taxes in the retail price, the differences with other European countries, the French Government fiscal receipts and budget. Some information forms are attached to this document and concern: the formation of fuel prices (upstream, refining and transport-distribution margins), the evolution of annual average transport-distribution margins, some reference data about world petroleum markets (supply and demand, prices, market data), and some reference data about the role of oil companies on the petroleum market. (J.S.)

  17. National reference doses for dental cephalometric radiography.

    Science.gov (United States)

    Holroyd, J R

    2011-12-01

    Diagnostic reference levels (DRLs) are an important tool in the optimisation of clinical radiography. Although national DRLs are provided for many diagnostic procedures including dental intra-oral radiography, there are currently no national DRLs set for cephalometric radiography. In the absence of formal national DRLs, the Health Protection Agency (HPA) has previously published National Reference Doses (NRDs) covering a wide range of diagnostic X-ray examinations. The aim of this study was to determine provisional NRDs for cephalometric radiography. Measurements made by the Dental X-ray Protection Service (DXPS) of the HPA, as part of the cephalometric X-ray equipment testing service provided to dentists and dental trade companies throughout the UK, were used to derive provisional NRDs. Dose-area product measurements were made on 42 X-ray sets. Third quartile dose-area product values for adult and child lateral cephalometric radiography were found to be 41 mGy cm² and 25 mGy cm², respectively, with individual measurements ranging from 3 mGy cm² to 108 mGy cm². This report proposes provisional NRDs of 40 mGy cm² and 25 mGy cm² for adult and child lateral cephalometric radiographs, respectively; these doses could be considered by employers when establishing their local DRLs.

  18. Dutch Risk Assessment tools

    NARCIS (Netherlands)

    Venema, A.

    2015-01-01

    The ‘Risico- Inventarisatie- en Evaluatie-instrumenten’ is the name for the Dutch risk assessment (RA) tools. A RA tool can be used to perform a risk assessment including an evaluation of the identified risks. These tools were among the first online risk assessment tools developed in Europe. The

  19. New QC 7 tools

    International Nuclear Information System (INIS)

    1982-03-01

    This book tells of new QC with 7 tools which includes TQC and new QC with 7 tools which is for better propel, what is QC method to think? what is new QC 7 tool ? like KJ law, PDPC law, arrow and diagram law, and matrix diagram law, application of new QC 7 tools such as field to apply, application of new QC 7 tools for policy management the method of new QC 7 tools including related regulations KJ law, matrix and data analysis, PDPC law and education and introduction of new QC 7 tools.

  20. Selected Reference Books of 1992.

    Science.gov (United States)

    McIlvaine, Eileen

    1993-01-01

    Presents an annotated bibliography of 40 recent scholarly and general works of interest to reference workers in university libraries. Topics areas covered include philosophy, religion, language, literature, architecture, economics, law, area studies, Russia and the Soviet Union, women's studies, and Christopher Columbus. New editions and…

  1. Referent Communication in Chronic Schizophrenia

    Science.gov (United States)

    Kantorowitz, David A.; Cohen, Bertram D.

    1977-01-01

    Thirty chronic schizophrenics (15 process and 15 reactive) and 15 normal control speakers described colors displayed in three-chip sets containing a referent and two nonreferent colors. Concludes that poor communication accuracy in long-term schizophrenics results from failure to include a self-editing stage as a part of the communication process.…

  2. Dietary reference values for riboflavin

    DEFF Research Database (Denmark)

    Sjödin, Anders Mikael

    2017-01-01

    Following a request from the European Commission, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) derives dietary reference values (DRVs) for riboflavin. The Panel considers that the inflection point in the urinary riboflavin excretion curve in relation to riboflavin intake...

  3. Dietary reference values for potassium

    DEFF Research Database (Denmark)

    Sjödin, Anders Mikael

    2016-01-01

    Following a request from the European Commission, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) derives dietary reference values (DRVs) for potassium. The Panel decides to set DRVs on the basis of the relationships between potassium intake and blood pressure and stroke...

  4. Haemostatic reference intervals in pregnancy

    DEFF Research Database (Denmark)

    Szecsi, Pal Bela; Jørgensen, Maja; Klajnbard, Anna

    2010-01-01

    Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age-specific refe......Haemostatic reference intervals are generally based on samples from non-pregnant women. Thus, they may not be relevant to pregnant women, a problem that may hinder accurate diagnosis and treatment of haemostatic disorders during pregnancy. In this study, we establish gestational age......-specific reference intervals for coagulation tests during normal pregnancy. Eight hundred one women with expected normal pregnancies were included in the study. Of these women, 391 had no complications during pregnancy, vaginal delivery, or postpartum period. Plasma samples were obtained at gestational weeks 13......-20, 21-28, 29-34, 35-42, at active labor, and on postpartum days 1 and 2. Reference intervals for each gestational period using only the uncomplicated pregnancies were calculated in all 391 women for activated partial thromboplastin time (aPTT), fibrinogen, fibrin D-dimer, antithrombin, free protein S...

  5. Verification of SAP reference models

    NARCIS (Netherlands)

    Dongen, van B.F.; Jansen-Vullers, M.H.; Aalst, van der W.M.P.; Benatallah, B.; Casati, F.

    2005-01-01

    To configure a process-aware information system (e.g., a workflow system, an ERP system), a business model needs to be transformed into an executable process model. Due to similarities in these transformations for different companies, databases with reference models, such as ARIS for MySAP, have

  6. Expert Systems in Reference Services.

    Science.gov (United States)

    Roysdon, Christine, Ed.; White, Howard D., Ed.

    1989-01-01

    Eleven articles introduce expert systems applications in library and information science, and present design and implementation issues of system development for reference services. Topics covered include knowledge based systems, prototype development, the use of artificial intelligence to remedy current system inadequacies, and an expert system to…

  7. Expertise and Intuitions about Reference

    Directory of Open Access Journals (Sweden)

    Edouard Machery

    2012-01-01

    Full Text Available Many philosophers hold that experts’ semantic intuitions are more reliable and provide better evidence than lay people’s intuitions—a thesis commonly called “the Expertise Defense.” Focusing on the intuitions about the reference of proper names, this article critically assesses the Expertise Defense.

  8. Reference frame for Product Configuration

    DEFF Research Database (Denmark)

    Ladeby, Klaes Rohde; Oddsson, Gudmundur Valur

    2011-01-01

    a reference frame for configuration that permits 1) a more precise understanding of a configuration system, 2) a understanding of how the configuration system relate to other systems, and 3) a definition of the basic concepts in configuration. The total configuration system, together with the definition...

  9. Space-Time Reference Systems

    CERN Document Server

    Soffel, Michael

    2013-01-01

    The high accuracy of modern astronomical spatial-temporal reference systems has made them considerably complex. This book offers a comprehensive overview of such systems. It begins with a discussion of ‘The Problem of Time’, including recent developments in the art of clock making (e.g., optical clocks) and various time scales. The authors address  the definitions and realization of spatial coordinates by reference to remote celestial objects such as quasars. After an extensive treatment of classical equinox-based coordinates, new paradigms for setting up a celestial reference system are introduced that no longer refer to the translational and rotational motion of the Earth. The role of relativity in the definition and realization of such systems is clarified. The topics presented in this book are complemented by exercises (with solutions). The authors offer a series of files, written in Maple, a standard computer algebra system, to help readers get a feel for the various models and orders of magnitude. ...

  10. The Lyman alpha reference sample

    DEFF Research Database (Denmark)

    Hayes, M.; Östlin, G.; Schaerer, D.

    2013-01-01

    We report on new imaging observations of the Lyman alpha emission line (Lyα), performed with the Hubble Space Telescope, that comprise the backbone of the Lyman alpha Reference Sample. We present images of 14 starburst galaxies at redshifts 0.028

  11. Human Rights: The Essential Reference.

    Science.gov (United States)

    Devine, Carol; Hansen, Carol Rae; Wilde, Ralph; Bronkhorst, Daan; Moritz, Frederic A.; Rolle, Baptiste; Sherman, Rebecca; Southard, Jo Lynn; Wilkinson, Robert; Poole, Hilary, Ed.

    This reference work documents the history of human rights theory, explains each article of the Universal Declaration of Human Rights, explores the contemporary human rights movement, and examines the major human rights issues facing the world today. This book is the first to combine historical and contemporary perspectives on these critical…

  12. Collective Management of Reference Services.

    Science.gov (United States)

    Comer, Cynthia H.; And Others

    1988-01-01

    Describes a one-year experiment with collective management--i.e., management in which decision-making rests with the department as a whole--in the Oberlin College Library reference department. The planning process, problems, and advantages and disadvantages of this style of management are discussed. Several questions are raised about the…

  13. Selected Reference Books of 1998.

    Science.gov (United States)

    McIlvaine, Eileen

    1999-01-01

    Reviews a selection of recent scholarly and general reference works under the categories of Periodicals and Newspapers, Philosophy, Literature, Film and Radio, Art and Architecture, Music, Political Science, Women's Studies, and History. A brief summary of new editions of standard works is provided at the end of the articles. (AEF)

  14. Quick Reference for Financial Reporting

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alexandra Eustache

    Quick Reference – Financial Reporting. 6. Complete FR3 - Payment Receipts, Foreign Exchange and Other Income Forms: a. Enter in Section 3A – Payment Receipt Form all payments received from IDRC. b. Use the Cash Exchange Form if the funds received from IDRC are held in a currency other than the project working ...

  15. Nuclear Structure References (NSR) file

    International Nuclear Information System (INIS)

    Ewbank, W.B.

    1978-08-01

    The use of the Nuclear Structure References file by the Nuclear Data Project at ORNL is described. Much of the report concerns format information of interest only to those preparing input to the system or otherwise needing detailed knowledge of its internal structure. 17 figures

  16. Brazilian readers and contextual reference Brazilian readers and contextual reference

    Directory of Open Access Journals (Sweden)

    Lilia M. O. Carioni

    2008-04-01

    Full Text Available This article describes an experiment carried out using Brazilian university students at UFSC, the purpose being to check comprehension relationships between two types of contextual reference and two languages, Portuguese and English. A major stimulus for the research was the question: are Brazilian students' difficulties in reading English related more to English language difficulties or to difficulties in processing text in general?

  17. REFERENCE CASES FOR USE IN THE CEMENTITOUS PARTNERSHIP PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C.; Kosson, D.; Garrabrants, A.

    2010-08-31

    The Cementitious Barriers Partnership Project (CBP) is a multi-disciplinary, multi-institution cross cutting collaborative effort supported by the US Department of Energy (DOE) to develop a reasonable and credible set of tools to improve understanding and prediction of the structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The period of performance is >100 years for operating facilities and > 1000 years for waste management. The CBP has defined a set of reference cases to provide the following functions: (i) a common set of system configurations to illustrate the methods and tools developed by the CBP, (ii) a common basis for evaluating methodology for uncertainty characterization, (iii) a common set of cases to develop a complete set of parameter and changes in parameters as a function of time and changing conditions, (iv) a basis for experiments and model validation, and (v) a basis for improving conceptual models and reducing model uncertainties. These reference cases include the following two reference disposal units and a reference storage unit: (i) a cementitious low activity waste form in a reinforced concrete disposal vault, (ii) a concrete vault containing a steel high-level waste tank filled with grout (closed high-level waste tank), and (iii) a spent nuclear fuel basin during operation. Each case provides a different set of desired performance characteristics and interfaces between materials and with the environment. Examples of concretes, grout fills and a cementitious waste form are identified for the relevant reference case configurations.

  18. REFERENCE CASES FOR USE IN THE CEMENTITIOUS BARRIERS PARTNERSHIP

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C

    2009-01-06

    The Cementitious Barriers Project (CBP) is a multidisciplinary cross cutting project initiated by the US Department of Energy (DOE) to develop a reasonable and credible set of tools to improve understanding and prediction of the structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The period of performance is >100 years for operating facilities and > 1000 years for waste management. The CBP has defined a set of reference cases to provide the following functions: (1) a common set of system configurations to illustrate the methods and tools developed by the CBP, (2) a common basis for evaluating methodology for uncertainty characterization, (3) a common set of cases to develop a complete set of parameter and changes in parameters as a function of time and changing conditions, and (4) a basis for experiments and model validation, and (5) a basis for improving conceptual models and reducing model uncertainties. These reference cases include the following two reference disposal units and a reference storage unit: (1) a cementitious low activity waste form in a reinforced concrete disposal vault, (2) a concrete vault containing a steel high-level waste tank filled with grout (closed high-level waste tank), and (3) a spent nuclear fuel basin during operation. Each case provides a different set of desired performance characteristics and interfaces between materials and with the environment. Examples of concretes, grout fills and a cementitious waste form are identified for the relevant reference case configurations.

  19. REFERENCE CASES FOR USE IN THE CEMENTITOUS PARTNERSHIP PROJECT

    International Nuclear Information System (INIS)

    Langton, C.; Kosson, D.; Garrabrants, A.

    2010-01-01

    The Cementitious Barriers Partnership Project (CBP) is a multi-disciplinary, multi-institution cross cutting collaborative effort supported by the US Department of Energy (DOE) to develop a reasonable and credible set of tools to improve understanding and prediction of the structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The period of performance is >100 years for operating facilities and > 1000 years for waste management. The CBP has defined a set of reference cases to provide the following functions: (i) a common set of system configurations to illustrate the methods and tools developed by the CBP, (ii) a common basis for evaluating methodology for uncertainty characterization, (iii) a common set of cases to develop a complete set of parameter and changes in parameters as a function of time and changing conditions, (iv) a basis for experiments and model validation, and (v) a basis for improving conceptual models and reducing model uncertainties. These reference cases include the following two reference disposal units and a reference storage unit: (i) a cementitious low activity waste form in a reinforced concrete disposal vault, (ii) a concrete vault containing a steel high-level waste tank filled with grout (closed high-level waste tank), and (iii) a spent nuclear fuel basin during operation. Each case provides a different set of desired performance characteristics and interfaces between materials and with the environment. Examples of concretes, grout fills and a cementitious waste form are identified for the relevant reference case configurations.

  20. INNOVATION MANAGEMENT TOOLS IN PUBLISHING COMPANIES

    Directory of Open Access Journals (Sweden)

    A. Shegda

    2013-09-01

    Full Text Available This article is devoted to the highly topical issue of modern publishing business as innovation management. introduction of technological innovation, measured as a promising strategy for the development of a constructive industry. The paper deals with main problems in managing of publishing companies. The reference consider of innovation management tools. In the article are exams the problems of books trend decline which require publishers introducing innovative methods of production and distribution. It was found that while the tools can be used. The process of innovation management with the following basic tools like as marketing innovation bench marketing, franchising, engineering innovation. It was found that while the tools can be used. So, the aim of the article is to analyze the modern tools of innovation management in the publishing field.

  1. Conceptual Design Tool for Concrete Shell Structures

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2011-01-01

    This paper focuses on conceptual tools for concrete shell structures when working within the span of performance-based design and computational morphogenesis. The designer, referred to as the Architect-Engineer, works through several iterations parallel with aesthetic, functional and technical re...

  2. Plans and progress for building a Great Lakes fauna DNA barcode reference library

    Science.gov (United States)

    DNA reference libraries provide researchers with an important tool for assessing regional biodiversity by allowing unknown genetic sequences to be assigned identities, while also providing a means for taxonomists to validate identifications. Expanding the representation of Great...

  3. El “Anclaje y Ajuste”, una herramienta de Marketing para analizar el poder de las referencias en el Arte, el Diseño y la Arquitectura = "Anchoring and Adjustment", a Marketing tool to analyse references in Art, Design and Architecture

    Directory of Open Access Journals (Sweden)

    Guillermo García-Badell

    2014-12-01

    Full Text Available El uso de referencias (obras anteriores, imágenes inspiradoras, o ideas generales está muchas veces en el origen de los proyectos artísticos, de diseño y de Arquitectura. Por otro lado, estas asociaciones sirven muchas veces para comunicar los objetivos creativos de artistas y diseñadores: se considera que usuarios y espectadores se sienten más cómodos cuando existen referencias entre los conceptos abstractos utilizados y ciertas imágenes figurativas e ideas comunes accesibles en el mundo que los rodea. Se da por supuesto que las referencias afectan a los juicios sobre las obras artísticas y sobre los diseños. Se estudia cómo los autores usan esas asociaciones en sus procesos creativos, pero existe un vacío acerca de cómo funciona el proceso de evaluación por parte de espectadores y usuarios. Dicho desde una perspectiva económica, sabríamos cómo se diseña un producto y deduciríamos, a partir de ahí, ciertas consecuencias sobre sus ventas. Sin embargo, en el ámbito del Marketing, parecería absurdo plantearse cuáles son esas consecuencias sin estudiar el Comportamiento del Consumidor desde que se acerca a ese producto hasta que toma una decisión de compra.El fenómeno de “Anclaje y ajuste” explica, desde el ámbito del Marketing, cómo se necesitan y utilizan referencias para juzgar los productos. De esta forma, el propósito del presente artículo es el de explicar este fenómeno de “Anclaje y Ajuste”, y ofrecer así nuevas vías para su aplicación en el ámbito del Arte, el Diseño y la Arquitectura.Abstract  Artistic and Design works are usually inspired by different references (previous works, images, or simply, ideas. On the other hand, these references are usually useful to communicate creative goals; it is considered that users and viewers feel comfortable when figurative images translate abstract concepts. The role of references in the creative processes has been widely studied before. At the same time

  4. CMOS voltage references an analytical and practical perspective

    CERN Document Server

    Kok, Chi-Wah

    2013-01-01

    A practical overview of CMOS circuit design, this book covers the technology, analysis, and design techniques of voltage reference circuits.  The design requirements covered follow modern CMOS processes, with an emphasis on low power, low voltage, and low temperature coefficient voltage reference design. Dedicating a chapter to each stage of the design process, the authors have organized the content to give readers the tools they need to implement the technologies themselves. Readers will gain an understanding of device characteristics, the practical considerations behind circuit topology,

  5. Hot Experimental Facility reference flowsheet

    International Nuclear Information System (INIS)

    North, E.D.

    1982-01-01

    This paper is a useful set of background information of HEF flowsheets, although many changes have been made in the past three years. The HEF reference flowsheet is a modified high-acid PUREX flowsheet capable of operating in the coprocessing mode or with full partitioning of U and Pu. Adequate decontamination factors are provided to purify high-burnup, fast breeder-reactor fuels to levels required for recycle back to a fuel fabrication facility. Product streams are mixed U-Pu oxide and uranium oxide. No contaminated liquid wastes are intentionally discharged to the environment. All wastes are solidified and packaged for appropriate disposal. Acid and water are recovered for internal recycle. Excess water is treated and discharged from the plant stack. Several changes have been made in the reference flowsheet since that time, and these are noted briefly

  6. Nanocomposites for Machining Tools

    Directory of Open Access Journals (Sweden)

    Daria Sidorenko

    2017-10-01

    Full Text Available Machining tools are used in many areas of production. To a considerable extent, the performance characteristics of the tools determine the quality and cost of obtained products. The main materials used for producing machining tools are steel, cemented carbides, ceramics and superhard materials. A promising way to improve the performance characteristics of these materials is to design new nanocomposites based on them. The application of micromechanical modeling during the elaboration of composite materials for machining tools can reduce the financial and time costs for development of new tools, with enhanced performance. This article reviews the main groups of nanocomposites for machining tools and their performance.

  7. Tool grinding machine

    Science.gov (United States)

    Dial, Sr., Charles E.

    1980-01-01

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thickness may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  8. Improved tool grinding machine

    Science.gov (United States)

    Dial, C.E. Sr.

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thicknesses may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  9. HANFORD WASTE MINEROLOGY REFERENCE REPORT

    International Nuclear Information System (INIS)

    Disselkamp, R.S.

    2010-01-01

    This report lists the observed mineral phases present in the Hanford tanks. This task was accomplished by performing a review of numerous reports using experimental techniques including, but not limited to: x-ray diffraction, polarized light microscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, electron energy loss spectroscopy, and particle size distribution analyses. This report contains tables that can be used as a quick reference to identify the crystal phases present observed in Hanford waste.

  10. HANFORD WASTE MINERALOGY REFERENCE REPORT

    Energy Technology Data Exchange (ETDEWEB)

    DISSELKAMP RS

    2010-06-29

    This report lists the observed mineral phases present in the Hanford tanks. This task was accomplished by performing a review of numerous reports that used experimental techniques including, but not limited to: x-ray diffraction, polarized light microscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, electron energy loss spectroscopy, and particle size distribution analyses. This report contains tables that can be used as a quick reference to identify the crystal phases observed in Hanford waste.

  11. HANFORD WASTE MINEROLOGY REFERENCE REPORT

    Energy Technology Data Exchange (ETDEWEB)

    DISSELKAMP RS

    2010-06-18

    This report lists the observed mineral phase phases present in the Hanford tanks. This task was accomplished by performing a review of numerous reports using experimental techniques including, but not limited to: x-ray diffraction, polarized light microscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, electron energy loss spectroscopy, and particle size distribution analyses. This report contains tables that can be used as a quick reference to identify the crystal phases present observed in Hanford waste.

  12. Hanford Waste Mineralogy Reference Report

    International Nuclear Information System (INIS)

    Disselkamp, R.S.

    2010-01-01

    This report lists the observed mineral phases present in the Hanford tanks. This task was accomplished by performing a review of numerous reports that used experimental techniques including, but not limited to: x-ray diffraction, polarized light microscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, electron energy loss spectroscopy, and particle size distribution analyses. This report contains tables that can be used as a quick reference to identify the crystal phases observed in Hanford waste.

  13. Tv & video engineer's reference book

    CERN Document Server

    Jackson, K G

    1991-01-01

    TV & Video Engineer's Reference Book presents an extensive examination of the basic television standards and broadcasting spectrum. It discusses the fundamental concepts in analogue and digital circuit theory. It addresses studies in the engineering mathematics, formulas, and calculations. Some of the topics covered in the book are the conductors and insulators, passive components, alternating current circuits; broadcast transmission; radio frequency propagation; electron optics in cathode ray tube; color encoding and decoding systems; television transmitters; and remote supervision of unatten

  14. Energy policy: selected references. [Booklet

    Energy Technology Data Exchange (ETDEWEB)

    Kenwrick-Piercy, E [comp.

    1980-01-01

    This bibliography is based on material held in the UK Department of Energy Library. Energy-related documents published between 1973 and 1980 are emphasized in the 260 references listed. The bibliography is organized under the major headings of United Kingdom, Irish Republic, World, Western Europe, Eastern Europe, North America, South America, Asia, Australia, New Zealand, Africa, and Middle East. For continuing information on energy policy, 5 useful periodicals are listed.

  15. Microgrid cyber security reference architecture.

    Energy Technology Data Exchange (ETDEWEB)

    Veitch, Cynthia K.; Henry, Jordan M.; Richardson, Bryan T.; Hart, Derek H.

    2013-07-01

    This document describes a microgrid cyber security reference architecture. First, we present a high-level concept of operations for a microgrid, including operational modes, necessary power actors, and the communication protocols typically employed. We then describe our motivation for designing a secure microgrid; in particular, we provide general network and industrial control system (ICS)-speci c vulnerabilities, a threat model, information assurance compliance concerns, and design criteria for a microgrid control system network. Our design approach addresses these concerns by segmenting the microgrid control system network into enclaves, grouping enclaves into functional domains, and describing actor communication using data exchange attributes. We describe cyber actors that can help mitigate potential vulnerabilities, in addition to performance bene ts and vulnerability mitigation that may be realized using this reference architecture. To illustrate our design approach, we present a notional a microgrid control system network implementation, including types of communica- tion occurring on that network, example data exchange attributes for actors in the network, an example of how the network can be segmented to create enclaves and functional domains, and how cyber actors can be used to enforce network segmentation and provide the neces- sary level of security. Finally, we describe areas of focus for the further development of the reference architecture.

  16. The citation with reference and the citation as a reference

    OpenAIRE

    Rafael Antonio Cunha Perrone

    2011-01-01

    O ensaio objetiva estabelecer paralelos entre a citação acadêmica e a citação utilizada como referência, para a produção das obras ou projetos de arquitetura. O artigo discute o uso de figuras paradigmáticas ou significativas, transladadas ou amalgamadas nas obras de arquitetura, a partir do entendimento da citação como dado argumentativo e qualitativo. Investiga algumas de suas assimetrias e congruências em sua utilização na linguagem escrita, como transcrição direta ou como fonte interpreta...

  17. ASPECT (Automated System-level Performance Evaluation and Characterization Tool), Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — SSCI has developed a suite of SAA tools and an analysis capability referred to as ASPECT (Automated System-level Performance Evaluation and Characterization Tool)....

  18. Improving Reference Service: The Case for Using a Continuous Quality Improvement Method.

    Science.gov (United States)

    Aluri, Rao

    1993-01-01

    Discusses the evaluation of library reference service; examines problems with past evaluations, including the lack of long-term planning and a systems perspective; and suggests a method for continuously monitoring and improving reference service using quality improvement tools such as checklists, cause and effect diagrams, Pareto charts, and…

  19. Can fisheries-induced evolution shift reference points for fisheries management?

    DEFF Research Database (Denmark)

    Heino, Mikko; Baulier, Loїc; Boukal, David S.

    2013-01-01

    Biological reference points are important tools for fisheries management. Reference points are not static, but may change when a population's environment or the population itself changes. Fisheries-induced evolution is one mechanism that can alter population characteristics, leading to “shifting...

  20. Tools of online Marketing

    OpenAIRE

    Hossain, M. S.; Rahman, M. F.

    2017-01-01

    Abstract Online marketing is the most crucial issue in the modern marketing era but there was no previous research that could identify the tools of internet marketing before this study and it was the first study on the field of online marketing tools. This research was descriptive in nature and it has attempted to identify the major tools of internet marketing from the concepts of traditional marketing tools. Worldwide network is known as Internet that can exchange information between use...

  1. OOTW COST TOOLS

    Energy Technology Data Exchange (ETDEWEB)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  2. Collecting Virtual Reference Statistics with an IM Chat-Bot

    Directory of Open Access Journals (Sweden)

    Mason R.K. Hall

    2008-06-01

    Full Text Available A perennial problem in libraries is capturing accurate statistics. This article addresses this problem with the creative use of Web 2.0 tools: Meebo and AOL Instant Messenger. It describes the development and implementation of an instant messaging "stat-bot" that prompts staff to record virtual reference statistics via IM. Step-by-step guidelines and the perl script are provided.

  3. Pro Tools HD

    CERN Document Server

    Camou, Edouard

    2013-01-01

    An easy-to-follow guide for using Pro Tools HD 11 effectively.This book is ideal for anyone who already uses ProTools and wants to learn more, or is new to Pro Tools HD and wants to use it effectively in their own audio workstations.

  4. Nanocomposites for Machining Tools

    DEFF Research Database (Denmark)

    Sidorenko, Daria; Loginov, Pavel; Mishnaevsky, Leon

    2017-01-01

    Machining tools are used in many areas of production. To a considerable extent, the performance characteristics of the tools determine the quality and cost of obtained products. The main materials used for producing machining tools are steel, cemented carbides, ceramics and superhard materials...

  5. Visual Basic 2012 programmer's reference

    CERN Document Server

    Stephens, Rod

    2012-01-01

    The comprehensive guide to Visual Basic 2012 Microsoft Visual Basic (VB) is the most popular programming language in the world, with millions of lines of code used in businesses and applications of all types and sizes. In this edition of the bestselling Wrox guide, Visual Basic expert Rod Stephens offers novice and experienced developers a comprehensive tutorial and reference to Visual Basic 2012. This latest edition introduces major changes to the Visual Studio development platform, including support for developing mobile applications that can take advantage of the Windows 8 operating system

  6. Oracle Data Dictionary Pocket Reference

    CERN Document Server

    Kreines, David

    2003-01-01

    If you work with Oracle, then you don't need to be told that the data dictionary is large and complex, and grows larger with each new Oracle release. It's one of the basic elements of the Oracle database you interact with regularly, but the sheer number of tables and views makes it difficult to remember which view you need, much less the name of the specific column. Want to make it simpler? The Oracle Data Dictionary Pocket Reference puts all the information you need right at your fingertips. Its handy and compact format lets you locate the table and view you need effortlessly without stoppin

  7. Dynamic HTML The Definitive Reference

    CERN Document Server

    Goodman, Danny

    2007-01-01

    Packed with information on the latest web specifications and browser features, this new edition is your ultimate one-stop resource for HTML, XHTML, CSS, Document Object Model (DOM), and JavaScript development. Here is the comprehensive reference for designers of Rich Internet Applications who need to operate in all modern browsers, including Internet Explorer 7, Firefox 2, Safari, and Opera. With this book, you can instantly see browser support for the latest standards-based technologies, including CSS Level 3, DOM Level 3, Web Forms 2.0, XMLHttpRequest for AJAX applications, JavaScript 1.7

  8. Energy reference forecast for 2014

    International Nuclear Information System (INIS)

    Schlesinger, Michael; Lutz, Christian

    2014-01-01

    The German Federal Ministry for Economic Affairs and Energy has commissioned three reputed institutions to prepare an energy reference forecast as well as a target scenario up to the year 2050. The results of this survey evidence a substantial need for political action if the goals of the Federal Government's energy concept are to be achieved as planned. In view of the wide range of interests among the players involved as well as the complexity of the demands facing the political leadership from diverse areas of life it appears unlikely that the targets laid down in the energy concept can be realised.

  9. VERA: Virtual Enterprise Reference Architecture

    DEFF Research Database (Denmark)

    Vesterager, Johan; Tølle, Martin; Bernus, Peter

    2003-01-01

    . To prepare for this is a complex task, in fact all business, management and planning views, and related subject areas and activities, may be involved. In order to deal with this complexity in a systematic way and secure global understanding Globemen has developed a Virtual Enterprise Reference Architecture......Globalisation, outsourcing and customisation are main challenges of today not least for one-of-a-kind producers. A crucial competitive factor will be the ability rapidly to form customer focused virtual enterprises comprised of competencies from different partners by taking full advantage of ICT...

  10. PVWatts Version 1 Technical Reference

    Energy Technology Data Exchange (ETDEWEB)

    Dobos, A. P.

    2013-10-01

    The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

  11. JavaScript Pocket Reference

    CERN Document Server

    Flanagan, David

    1998-01-01

    JavaScript is a powerful, object-based scripting language that can be embedded directly in HTML pages. It allows you to create dynamic, interactive Web-based applications that run completely within a Web browser -- JavaScript is the language of choice for developing Dynamic HTML (DHTML) content. JavaScript can be integrated effectively with CGI and Java to produce sophisticated Web applications, although, in many cases, JavaScript eliminates the need for complex CGI scripts and Java applets altogether. The JavaScript Pocket Reference is a companion volume to JavaScript: The Definitive Guide

  12. Reference design for LAMPF II

    International Nuclear Information System (INIS)

    Thiessen, H.A.

    1983-01-01

    A reference design for the 32-GeV LAMPF II proton accelerator is proposed. This design consists of a 30-Hz rapid-cycling synchrotron with a dc stretcher. A superiodicity 5 design with dispersion-free straight sections is suggested for both machines. Beam-dynamics calculations are partially complete and rf requirements are given. Apertures are calculated for 2 x 10 13 protons per pulse (100 μA average current). No significant problems are observed at any time in the cycle in a longitudinal beam-dynamics simulation including space charge

  13. AREVA 2009 reference document; AREVA document de reference 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies. It contains information on the markets, market shares and competitive position of the AREVA group. This information provides an adequate picture of the size of these markets and of the AREVA group's competitive position. Content: 1 - Person responsible for the Reference Document and Attestation by the person responsible for the Reference Document; 2 - Statutory and Deputy Auditors; 3 - Selected financial information; 4 - Risks: Risk management and coverage, Legal risk, Industrial and environmental risk, Operating risk, Risk related to major projects, Liquidity and market risk, Other risk; 5 - Information about the issuer: History and development, Investments; 6 - Business overview: Markets for nuclear power and renewable energies, AREVA customers and suppliers, Overview and strategy of the group, Business divisions, Discontinued operations: AREVA Transmission and Distribution; 7 - Organizational structure; 8 - Property, plant and equipment: Principal sites of the AREVA group, Environmental issues that may affect the issuer's; 9 - Analysis of and comments on the group's financial position and performance: Overview, Financial position, Cash flow, Statement of financial position, Events subsequent to year-end closing for 2009; 10 - Capital Resources; 11 - Research and development programs, patents and licenses; 12 -trend information: Current situation, Financial objectives; 13 - Profit forecasts or estimates; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of corporate bodies; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties: French state, CEA, EDF group; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information: Share capital, Certificate of incorporation and

  14. Pickering tool management system

    International Nuclear Information System (INIS)

    Wong, E.H.; Green, A.H.

    1997-01-01

    Tools were being deployed in the station with no process in effect to ensure that they are maintained in good repair so as to effectively support the performance of Maintenance activities. Today's legal requirements require that all employers have a process in place to ensure that tools are maintained in a safe condition. This is specified in the Ontario Health and Safety Act. The Pickering Tool Management System has been chosen as the process at Pickering N.D to manage tools. Tools are identified by number etching and bar codes. The system is a Windows application installed on several file servers

  15. Machine tool structures

    CERN Document Server

    Koenigsberger, F

    1970-01-01

    Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration c

  16. Areva reference document 2007; Areva document de reference 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains also information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the reference document and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction (not applicable); 3 - General information on the company and its share capital: Information on Areva, Information on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; 4 - Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts 140 Principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and Development programs, Intellectual Property and Trademarks, Risk and insurance; 5 - Assets financial position financial performance: Analysis of and comments on the group's financial position and performance, Human Resources report, Environmental report, Consolidated financial statements 2007, Notes to the consolidated financial statements, Annual financial statements 2007, Notes to the corporate financial statements; 6 - Corporate governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Ordinary General Meeting of Shareholders of April 17, 2008; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2007, Outlook; Glossary; table of concordance.

  17. Areva, reference document 2006; Areva, document de reference 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains information on the markets, market shares and competitive position of the AREVA group. Content: - 1 Person responsible for the reference document and persons responsible for auditing the financial statements; - 2 Information pertaining to the transaction (Not applicable); - 3 General information on the company and its share capital: Information on AREVA, on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; - 4 Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts, The principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development programs, intellectual property and trademarks, Risk and insurance; - 5 Assets - Financial position - Financial performance: Analysis of and comments on the group's financial position and performance, 2006 Human Resources Report, Environmental Report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA financial statements, Notes to the corporate financial statements; 6 - Corporate Governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Combined General Meeting of Shareholders of May 3, 2007; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2006, Outlook; 8 - Glossary; 9 - Table of concordance.

  18. Areva reference document 2007; Areva document de reference 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains also information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the reference document and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction (not applicable); 3 - General information on the company and its share capital: Information on Areva, Information on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; 4 - Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts 140 Principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and Development programs, Intellectual Property and Trademarks, Risk and insurance; 5 - Assets financial position financial performance: Analysis of and comments on the group's financial position and performance, Human Resources report, Environmental report, Consolidated financial statements 2007, Notes to the consolidated financial statements, Annual financial statements 2007, Notes to the corporate financial statements; 6 - Corporate governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Ordinary General Meeting of Shareholders of April 17, 2008; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2007, Outlook; Glossary; table of

  19. Areva, reference document 2006; Areva, document de reference 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains information on the markets, market shares and competitive position of the AREVA group. Content: - 1 Person responsible for the reference document and persons responsible for auditing the financial statements; - 2 Information pertaining to the transaction (Not applicable); - 3 General information on the company and its share capital: Information on AREVA, on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; - 4 Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts, The principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development programs, intellectual property and trademarks, Risk and insurance; - 5 Assets - Financial position - Financial performance: Analysis of and comments on the group's financial position and performance, 2006 Human Resources Report, Environmental Report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA financial statements, Notes to the corporate financial statements; 6 - Corporate Governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Combined General Meeting of Shareholders of May 3, 2007; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2006, Outlook; 8 - Glossary; 9 - Table of concordance.

  20. Nuclear science references coding manual

    International Nuclear Information System (INIS)

    Ramavataram, S.; Dunford, C.L.

    1996-08-01

    This manual is intended as a guide to Nuclear Science References (NSR) compilers. The basic conventions followed at the National Nuclear Data Center (NNDC), which are compatible with the maintenance and updating of and retrieval from the Nuclear Science References (NSR) file, are outlined. In Section H, the structure of the NSR file such as the valid record identifiers, record contents, text fields as well as the major TOPICS for which are prepared are enumerated. Relevant comments regarding a new entry into the NSR file, assignment of , generation of and linkage characteristics are also given in Section II. In Section III, a brief definition of the Keyword abstract is given followed by specific examples; for each TOPIC, the criteria for inclusion of an article as an entry into the NSR file as well as coding procedures are described. Authors preparing Keyword abstracts either to be published in a Journal (e.g., Nucl. Phys. A) or to be sent directly to NNDC (e.g., Phys. Rev. C) should follow the illustrations in Section III. The scope of the literature covered at the NNDC, the categorization into Primary and Secondary sources, etc., is discussed in Section IV. Useful information regarding permitted character sets, recommended abbreviations, etc., is given under Section V as Appendices

  1. Nuclear structure references coding manual

    International Nuclear Information System (INIS)

    Ramavataram, S.; Dunford, C.L.

    1984-02-01

    This manual is intended as a guide to Nuclear Structure References (NSR) compilers. The basic conventions followed at the National Nuclear Data Center (NNDC), which are compatible with the maintenance and updating of and retrieval from the Nuclear Structure References (NSR) file, are outlined. The structure of the NSR file such as the valid record identifiers, record contents, text fields as well as the major topics for which [KEYWORDS] are prepared are ennumerated. Relevant comments regarding a new entry into the NSR file, assignment of [KEYNO ], generation of [SELECTRS] and linkage characteristics are also given. A brief definition of the Keyword abstract is given followed by specific examples; for each TOPIC, the criteria for inclusion of an article as an entry into the NSR file as well as coding procedures are described. Authors submitting articles to Journals which require Keyword abstracts should follow the illustrations. The scope of the literature covered at NNDC, the categorization into Primary and Secondary sources, etc. is discussed. Useful information regarding permitted character sets, recommended abbreviations, etc. is given

  2. Iodine frequency references for space

    International Nuclear Information System (INIS)

    Schuldt, Thilo; Braxmaier, Claus; Döringshoff, Klaus; Peters, Achim; Oswald, Markus; Johann, Ulrich

    2017-01-01

    Optical frequency references are a key element for the realization of future space missions. They are needed for missions related to tests of fundamental physics, gravitational wave detection, Earth observation and navigation and ranging. In missions such as GRACE follow-on or LISA the optical frequency reference is used as light source for high-sensitivity inter-satellite distance metrology. While cavity-based systems are current baseline e.g. for LISA, frequency stabilization on a hyperfine transition in molecular iodine near 532 nm is a promising alternative. Due to its absolute frequency, iodine standards crucially simplify the initial spacecraft acquisition procedures. Current setups fulfill the GRACE-FO and LISA frequency stability requirements and are realized near Engineering Model level. We present the current status of our developments on Elegant Breadboard (EBB) and Engineering Model (EM) level taking into account specific design criteria for space compatibility such as compactness (size iodine spectroscopy EM: 38 × 18 × 10 cm 3 ) and robustness. Both setups achieved similar frequency stabilities of ∼ 1 · 10 −14 at an integration time of 1 s and below 5 · 10 −15 at integration times between 10 s and 1000 s. Furthermore, we present an even more compact design currently developed for a sounding rocket mission with launch in 2017. (paper)

  3. Event boundaries and anaphoric reference.

    Science.gov (United States)

    Thompson, Alexis N; Radvansky, Gabriel A

    2016-06-01

    The current study explored the finding that parsing a narrative into separate events impairs anaphor resolution. According to the Event Horizon Model, when a narrative event boundary is encountered, a new event model is created. Information associated with the prior event model is removed from working memory. So long as the event model containing the anaphor referent is currently being processed, this information should still be available when there is no narrative event boundary, even if reading has been disrupted by a working-memory-clearing distractor task. In those cases, readers may reactivate their prior event model, and anaphor resolution would not be affected. Alternatively, comprehension may not be as event oriented as this account suggests. Instead, any disruption of the contents of working memory during comprehension, event related or not, may be sufficient to disrupt anaphor resolution. In this case, reading comprehension would be more strongly guided by other, more basic language processing mechanisms and the event structure of the described events would play a more minor role. In the current experiments, participants were given stories to read in which we included, between the anaphor and its referent, either the presence of a narrative event boundary (Experiment 1) or a narrative event boundary along with a working-memory-clearing distractor task (Experiment 2). The results showed that anaphor resolution was affected by narrative event boundaries but not by a working-memory-clearing distractor task. This is interpreted as being consistent with the Event Horizon Model of event cognition.

  4. Developing a verification tool for calculations dissemination through COBAYA

    International Nuclear Information System (INIS)

    Sabater Alcaraz, A.; Rucabado Rucabado, G.; Cuervo Gomez, D.; Garcia Herranz, N.

    2014-01-01

    The development of a software tool that automates the comparison of results with previous versions of the code and results using models of accuracy is crucial for implementing the code new functionalities. The work presented here has been the generation the mentioned tool and the set of reference cases that have set up the afore mentioned matrix. (Author)

  5. Advanced reach tool (ART) : Development of the mechanistic model

    NARCIS (Netherlands)

    Fransman, W.; Tongeren, M. van; Cherrie, J.W.; Tischer, M.; Schneider, T.; Schinkel, J.; Kromhout, H.; Warren, N.; Goede, H.; Tielemans, E.

    2011-01-01

    This paper describes the development of the mechanistic model within a collaborative project, referred to as the Advanced REACH Tool (ART) project, to develop a tool to model inhalation exposure for workers sharing similar operational conditions across different industries and locations in Europe.

  6. Tools for regulatory assessment of occupational exposure: Development and challenges

    NARCIS (Netherlands)

    Tielemans, E.; Warren, N.; Schneider, T.; Tischer, M.; Ritchie, P.; Goede, H.; Kromhout, H.; Hemmen, J. van; Cherrie, J.W.

    2007-01-01

    REACH (Registration, Evaluation and Authorization of CHemicals) requires improved exposure models that can be incorporated into screening tools and refined assessment tools. These are referred to as tier 1 and 2 models, respectively. There are a number of candidate in tier 1 models that could be

  7. Pro Tools 9 music production, recording, editing and mixing

    CERN Document Server

    Collins, Mike

    2012-01-01

    Prepare yourself to be a great producer when using Pro Tools in your studio. Pro Tools 9: Music Production, Recording, Editing & Mixing is the definitive guide to the software for new and professional users, providing you with all the vital techniques that you need to know. Covering both Pro Tools HD 9 and Pro Tools 9 software, this book is extensively illustrated in color and packed with time saving hints and tips - making it a great reference to keep on hand.* Become an expert Pro Tools user and fully unlock the potential of your system! * Discover how to achieve complete co

  8. The Spallation Neutron Source RF Reference System

    CERN Document Server

    Piller, Maurice; Crofford, Mark; Doolittle, Lawrence; Ma, Hengjie

    2005-01-01

    The Spallation Neutron Source (SNS) RF Reference System includes the master oscillator (MO), local oscillator(LO) distribution, and Reference RF distribution systems. Coherent low noise Reference RF signals provide the ability to control the phase relationships between the fields in the front-end and linear accelerator (linac) RF cavity structures. The SNS RF Reference System requirements, implementation details, and performance are discussed.

  9. Transition Towards Energy Efficient Machine Tools

    CERN Document Server

    Zein, André

    2012-01-01

    Energy efficiency represents a cost-effective and immediate strategy of a sustainable development. Due to substantial environmental and economic implications, a strong emphasis is put on the electrical energy requirements of machine tools for metalworking processes. The improvement of energy efficiency is however confronted with diverse barriers, which sustain an energy efficiency gap of unexploited potential. The deficiencies lie in the lack of information about the actual energy requirements of machine tools, a minimum energy reference to quantify improvement potential and the possible actions to improve the energy demand. Therefore, a comprehensive concept for energy performance management of machine tools is developed which guides the transition towards energy efficient machine tools. It is structured in four innovative concept modules, which are embedded into step-by-step workflow models. The capability of the performance management concept is demonstrated in an automotive manufacturing environment. The ...

  10. An overview of digital reference services

    OpenAIRE

    Hemnani, Anita

    2009-01-01

    Digital reference service is an emerging trend of traditional reference service. Easily accessible digital reference service has become one of the hallmark of the library and information services. The paper highlights how new visage of traditional reference service is developing as a natural solution to keep pace with comprehensive technological environment. It discusses about the basic concepts, elements of digital reference service and give in detail modes, the advantages, limitations, and...

  11. Teaching Reference Skills: Does it really Matter?

    Directory of Open Access Journals (Sweden)

    Monika Kavalir

    2010-05-01

    Full Text Available The article discusses the results of a study at the core of which is the question of whether teaching reference skills really matters – i.e. how useful it is to train students to work with dictionaries. To answer this query, two issues are investigated: firstly, how effective the particular methodology developed here is with regard to using thesauri; and secondly, whether it makes a difference if some specific hands-on exercises are included or excluded. By the end of the project, the students felt that thesauri, a previously unknown language tool, would be quite useful for their work in the future; on average, they were planning to use a thesaurus several times a month. The analysis of the student questionnaires and a comparison of lexical variation in the first and second drafts of the essays also showed that the experimental group, which received more practical training, generally found thesauri more useful and, accordingly, used them more than the control group did.

  12. Construction Marketing: Developing a Reference Framework

    Directory of Open Access Journals (Sweden)

    Mahmood Mokhtariani

    2017-01-01

    Full Text Available Successful companies are strongly committed to marketing management. However, marketing is either misunderstood or completely neglected in many construction companies, mainly due to the difficulty of applying conventional marketing in the industry, accompanied by the lack of sufficient research on the nature of marketing and tailored marketing theories and strategies for the construction. This study attempts to fill a part of this gap by examining the nature of the construction industry from the marketing viewpoint and developing a comprehensive framework. A systematic investigation into the nature via a combination of Kotler’s product classification system and Lovelock’s classification criteria reveals that construction is an “industrial, project-based, and primarily service-oriented” (IPS product with specific characteristics from the marketing perspective. Based on this nature, a reference framework for strategic marketing planning is developed through a literature review based on grounded theory and using the focus group discussion as a refinement tool. The framework indicates that construction companies are involved in and should plan for three working fields—project-based activities, relationship marketing, and marketing mix-related functions. The findings provide a fundamental basis that helps researchers and practitioners gain a true understanding of the concepts and scope of construction marketing and draw a clear and practical roadmap for future work.

  13. New Concepts in Digital Reference

    CERN Document Server

    Lankes, R David

    2009-01-01

    Let us start with a simple scenario: a man asks a woman 'how high is Mount Everest?' The woman replies '29,029 feet'. Nothing could be simpler. Now let us suppose that rather than standing in a room, or sitting on a bus, the man is at his desk and the woman is 300 miles away with the conversation taking place using e-mail. Still simple? Certainly - it happens every day. So why all the bother about digital (virtual, electronic, chat, etc.) reference? If the man is a pilot flying over Mount Everest, the answer matters. If you are a lawyer going to court, the identity of the woman is very importa

  14. The Micropaleontological Reference Centers Network

    Directory of Open Access Journals (Sweden)

    David Lazarus

    2006-09-01

    Full Text Available The Micropaleontological Reference Centers (MRCscomprise large microfossil slide collections prepared from core samples obtained through the Deep Sea Drilling Project(DSDP and Ocean Drilling Program (ODP. The MRCs have been maintained for three decades, largely as a volunteer effort by a global network of curators at more than a dozen institutions (Fig.1, Table 1. They were originallyintended to provide a permanent micropaleontological archive for the DSDP; however, as their geographic and stratigraphic coverage has increased they have become increasingly valuable for research and teaching. This article describes the MRCs and their current usage, identifi es the need to maintain and improve the accuracy of the microfossil taxonomy upon which most DSDP and ODP geochronologyis based, and cites the potential for the future use of the MRCs by the Integrated Ocean Drilling Program (IODP.

  15. Teaching Ethos of Reference Professors

    Directory of Open Access Journals (Sweden)

    Jules Marcel

    2018-03-01

    Full Text Available The present article discusses the teaching ethos of professors who are recognized for their good practice as trainers. The aim of our study is to analyze the influences of such professors’ professional constitution, as well as the explicit and/or tacit teaching knowledge they mobilize in their teaching practices. Based on Shulman, Gauthier, Tardif and Polanyi, we conducted interviews with three professors described by their students as reference. They were also observed in their classes, in the context of an undergraduate program in pedagogy at a public university. Data show similarities between the practices of the investigated professors, as well as a consistent description of their didactics, which is marked by intellective, moral, emotional and behavioral features.

  16. SNAP operating system reference manual

    International Nuclear Information System (INIS)

    Sabuda, J.D.; Polito, J.; Walker, J.L.; Grant, F.H. III.

    1982-03-01

    The SNAP Operating System (SOS) is a FORTRAN 77 program which provides assistance to the safeguards analyst who uses the Safeguards Automated Facility Evaluation (SAFE) and the Safeguards Network Analysis Procedure (SNAP) techniques. Features offered by SOS are a data base system for storing a library of SNAP applications, computer graphics representation of SNAP models, a computer graphics editor to develop and modify SNAP models, a SAFE-to-SNAP interface, automatic generation of SNAP input data, and a computer graphic post-processor for SNAP. The SOS Reference Manual provides detailed application information concerning SOS as well as a detailed discussion of all SOS components and their associated command input formats. SOS was developed for the US Nuclear Regulatory Commission's Office of Nuclear Regulatory Research and the US Naval Surface Weapons Center by Pritsker and Associates, Inc., under contract to Sandia National Laboratories

  17. Generic Crystalline Disposal Reference Case

    Energy Technology Data Exchange (ETDEWEB)

    Painter, Scott Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Chu, Shaoping [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Harp, Dylan Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Perry, Frank Vinton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wang, Yifeng [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-20

    A generic reference case for disposal of spent nuclear fuel and high-level radioactive waste in crystalline rock is outlined. The generic cases are intended to support development of disposal system modeling capability by establishing relevant baseline conditions and parameters. Establishment of a generic reference case requires that the emplacement concept, waste inventory, waste form, waste package, backfill/buffer properties, EBS failure scenarios, host rock properties, and biosphere be specified. The focus in this report is on those elements that are unique to crystalline disposal, especially the geosphere representation. Three emplacement concepts are suggested for further analyses: a waste packages containing 4 PWR assemblies emplaced in boreholes in the floors of tunnels (KBS-3 concept), a 12-assembly waste package emplaced in tunnels, and a 32-assembly dual purpose canister emplaced in tunnels. In addition, three failure scenarios were suggested for future use: a nominal scenario involving corrosion of the waste package in the tunnel emplacement concepts, a manufacturing defect scenario applicable to the KBS-3 concept, and a disruptive glaciation scenario applicable to both emplacement concepts. The computational approaches required to analyze EBS failure and transport processes in a crystalline rock repository are similar to those of argillite/shale, with the most significant difference being that the EBS in a crystalline rock repository will likely experience highly heterogeneous flow rates, which should be represented in the model. The computational approaches required to analyze radionuclide transport in the natural system are very different because of the highly channelized nature of fracture flow. Computational workflows tailored to crystalline rock based on discrete transport pathways extracted from discrete fracture network models are recommended.

  18. National Survey of Adult and Pediatric Reference Intervals in Clinical Laboratories across Canada: A Report of the CSCC Working Group on Reference Interval Harmonization.

    Science.gov (United States)

    Adeli, Khosrow; Higgins, Victoria; Seccombe, David; Collier, Christine P; Balion, Cynthia M; Cembrowski, George; Venner, Allison A; Shaw, Julie

    2017-11-01

    Reference intervals are widely used decision-making tools in laboratory medicine, serving as health-associated standards to interpret laboratory test results. Numerous studies have shown wide variation in reference intervals, even between laboratories using assays from the same manufacturer. Lack of consistency in either sample measurement or reference intervals across laboratories challenges the expectation of standardized patient care regardless of testing location. Here, we present data from a national survey conducted by the Canadian Society of Clinical Chemists (CSCC) Reference Interval Harmonization (hRI) Working Group that examines variation in laboratory reference sample measurements, as well as pediatric and adult reference intervals currently used in clinical practice across Canada. Data on reference intervals currently used by 37 laboratories were collected through a national survey to examine the variation in reference intervals for seven common laboratory tests. Additionally, 40 clinical laboratories participated in a baseline assessment by measuring six analytes in a reference sample. Of the seven analytes examined, alanine aminotransferase (ALT), alkaline phosphatase (ALP), and creatinine reference intervals were most variable. As expected, reference interval variation was more substantial in the pediatric population and varied between laboratories using the same instrumentation. Reference sample results differed between laboratories, particularly for ALT and free thyroxine (FT4). Reference interval variation was greater than test result variation for the majority of analytes. It is evident that there is a critical lack of harmonization in laboratory reference intervals, particularly for the pediatric population. Furthermore, the observed variation in reference intervals across instruments cannot be explained by the bias between the results obtained on instruments by different manufacturers. Copyright © 2017 The Canadian Society of Clinical Chemists

  19. A reference aerosol for a radon reference chamber

    Science.gov (United States)

    Paul, Annette; Keyser, Uwe

    1996-02-01

    The measurement of radon and radon progenies and the calibration of their detection systems require the production and measurement of aerosols well-defined in size and concentration. In the German radon reference chamber, because of its unique chemical and physical properties, carnauba wax is used to produce standard aerosols. The aerosol size spectra are measured on-line by an aerosol measurement system in the range of 10 nm to 1 μm aerodynamic diameter. The experimental set-ups for the study of adsorption of radioactive ions on aerosols as function of their size and concentration will be described, the results presented and further adaptations for an aerosol jet introduced (for example, for the measurement of short-lived neutron-rich isotopes). Data on the dependence of aerosol radius, ion concentration and element selectivity is collected by using a 252Cf-sf source. The fission products of this source range widely in elements, isotopes and charges. Adsorption and the transport of radioactive ions on aerosols have therefore been studied for various ions for the first time, simultaneously with the aerosol size on-line spectrometry.

  20. A reference aerosol for a radon reference chamber

    Energy Technology Data Exchange (ETDEWEB)

    Paul, A. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany); Keyser, U. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany)

    1996-01-11

    The measurement of radon and radon progenies and the calibration of their detection systems require the production and measurement of aerosols well-defined in size and concentration. In the German radon reference chamber, because of its unique chemical and physical properties, carnauba wax is used to produce standard aerosols. The aerosol size spectra are measured on-line by an aerosol measurement system in the range of 10 nm to 1 {mu}m aerodynamic diameter. The experimental set-ups for the study of adsorption of radioactive ions on aerosols as function of their size and concentration are described, the results presented and further adaptations for an aerosol jet introduced (for example, for the measurement of short-lived neutron-rich isotopes). Data on the dependence of aerosol radius, ion concentration and element selectivity is collected by using a {sup 252}Cf-sf source. The fission products of this source range widely in elements, isotopes and charges. Adsorption and the transport of radioactive ions on aerosols have therefore been studied for various ions for the first time, simultaneously with the aerosol size on-line spectrometry. (orig.).

  1. Open Health Tools: Tooling for Interoperable Healthcare

    Directory of Open Access Journals (Sweden)

    Skip McGaughey

    2008-11-01

    Full Text Available The Open Health Tools initiative is creating an ecosystem focused on the production of software tooling that promotes the exchange of medical information across political, geographic, cultural, product, and technology lines. At its core, OHT believes that the availability of high-quality tooling that interoperates will propel the industry forward, enabling organizations and vendors to build products and systems that effectively work together. This will ?raise the interoperability bar? as a result of having tools that just work. To achieve these lofty goals, careful consideration must be made to the constituencies that will be most affected by an OHT-influenced world. This document outlines a vision of OHT?s impact to these stakeholders. It does not explain the OHT process itself or how the OHT community operates. Instead, we place emphasis on the impact of that process within the health industry. The catchphrase ?code is king? underpins this document, meaning that the manifestation of any open source community lies in the products and technology it produces.

  2. O uso da sorologia como ferramenta adicional no apoio ao diagnóstico de casos difíceis de hanseníase multibacilar: lições de uma unidade de referência The use of serology as an additional tool to support diagnosis of difficult multibacillary leprosy cases: lessons from clinical care

    Directory of Open Access Journals (Sweden)

    Maria Leide W. Oliveira

    2008-01-01

    Full Text Available Sete casos de hanseníase multibacilar (MB e dois casos com suspeição de hanseníase atendidos em situações distintas do atendimento clínico-dermatológico na Universidade Federal do Rio de Janeiro são descritos. Todos apresentaram dificuldades no diagnóstico visto que não tinham sinais e sintomas cardinais da hanseníase. Um teste sorológico utilizado como ferramenta auxiliar foi útil no processo de diagnóstico ou exclusão de cada caso e facilitou as discussões acadêmicas na hora do exame clínico. A sorologia e baciloscopia de linfa são consideradas como os únicos instrumentos rápidos e de baixo custo para a confirmação de casos MB atípicos, e as vantagens e desvantagens de cada exame são discutidas. Ambos os testes complementam o processo diagnóstico e classificação dos casos para fins terapêuticos. A vantagem da baciloscopia está na sua capacidade de confirmação do diagnóstico. As vantagens da sorologia são: (a sua aplicabilidade para uso direto por profissionais de saúde no momento da consulta, visto que os resultados são imediatos, (b a possibilidade da participação dos pacientes no processo, e (c oferece uma oportunidade para melhor ensino da patogênese da hanseníase.Seven multibacillary leprosy and two suspected cases assisted in different situations during clinical care activities at the university in Rio de Janeiro city are described. All cases presented some difficulties for diagnosis, since they evolved with few or no cardinal signs or symptoms of leprosy. A serological test used as an auxiliary tool was helpful in the diagnosis or exclusion procedure of each case, facilitating academic discussions at the time of case examination. Considering serology and bacilloscopy (skin smear as the only rapid and relatively cheap available tests for confirmation of atypical MB leprosy, the advantages and disadvantages of their use were discussed. Both tests support the diagnostic procedure and the

  3. Scheme Program Documentation Tools

    DEFF Research Database (Denmark)

    Nørmark, Kurt

    2004-01-01

    are separate and intended for different documentation purposes they are related to each other in several ways. Both tools are based on XML languages for tool setup and for documentation authoring. In addition, both tools rely on the LAML framework which---in a systematic way---makes an XML language available...... as named functions in Scheme. Finally, the Scheme Elucidator is able to integrate SchemeDoc resources as part of an internal documentation resource....

  4. Use of gamma spectrometry for analysis of three reference materials

    International Nuclear Information System (INIS)

    Kinova, L.

    2004-01-01

    All reference materials (Reference material A: weight = 49.23 g; Reference material B: weight = 36.08 g; Reference material C: weight = 26.18 g) were packed in 50 cm 3 polypropylene vials, sealed and measured consecutively three times at intervals of the average of 25 days. Low background gamma spectrometry system: HPGe detector with high energy resolution (FWHM for 1332 KeV of Co-60 is 1.9 KeV, Relative counting efficiency for the same energy is 21 %) was used. Results: All materials are of low activity and must be measured for a long time.The highest specific activity of a man-made radionuclides Cs-137 and Am-241 is in the material A. An instrumentally measurable activity of Pb-210 also can be observed in this material. Medium values are in the material B. The reference material C according to the specific activity seems to be a low natural radioactivity material with highest activity of natural nuclides Th-232 and Pa-234 (progeny of U-238). Conclusions: Gamma spectrometry is an useful tool for initial measurement of materials with low radioactivity. Such measurements give an orientation for the nuclides content and approximate activity in the material for the following radiochemical determinations

  5. Agreement Workflow Tool (AWT)

    Data.gov (United States)

    Social Security Administration — The Agreement Workflow Tool (AWT) is a role-based Intranet application used for processing SSA's Reimbursable Agreements according to SSA's standards. AWT provides...

  6. Instant Spring Tool Suite

    CERN Document Server

    Chiang, Geoff

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

  7. Chimera Grid Tools

    Science.gov (United States)

    Chan, William M.; Rogers, Stuart E.; Nash, Steven M.; Buning, Pieter G.; Meakin, Robert

    2005-01-01

    Chimera Grid Tools (CGT) is a software package for performing computational fluid dynamics (CFD) analysis utilizing the Chimera-overset-grid method. For modeling flows with viscosity about geometrically complex bodies in relative motion, the Chimera-overset-grid method is among the most computationally cost-effective methods for obtaining accurate aerodynamic results. CGT contains a large collection of tools for generating overset grids, preparing inputs for computer programs that solve equations of flow on the grids, and post-processing of flow-solution data. The tools in CGT include grid editing tools, surface-grid-generation tools, volume-grid-generation tools, utility scripts, configuration scripts, and tools for post-processing (including generation of animated images of flows and calculating forces and moments exerted on affected bodies). One of the tools, denoted OVERGRID, is a graphical user interface (GUI) that serves to visualize the grids and flow solutions and provides central access to many other tools. The GUI facilitates the generation of grids for a new flow-field configuration. Scripts that follow the grid generation process can then be constructed to mostly automate grid generation for similar configurations. CGT is designed for use in conjunction with a computer-aided-design program that provides the geometry description of the bodies, and a flow-solver program.

  8. Easy QC 7 tools

    International Nuclear Information System (INIS)

    1981-04-01

    This book explains method of QC 7 tools, mind for using QC 7 tools, effect of QC 7 tools application, giving descriptions of graph, pareto's diagram like application writing way and using method of pareto's diagram, characteristic diagram, check sheet such as purpose and subject of check, goals and types of check sheet, and using point of check sheet, histogram like application and using method, and stratification, scatterplot, control chart, promotion method and improvement and cases of practice of QC tools.

  9. Easy QC 7 tools

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-04-15

    This book explains method of QC 7 tools, mind for using QC 7 tools, effect of QC 7 tools application, giving descriptions of graph, pareto's diagram like application writing way and using method of pareto's diagram, characteristic diagram, check sheet such as purpose and subject of check, goals and types of check sheet, and using point of check sheet, histogram like application and using method, and stratification, scatterplot, control chart, promotion method and improvement and cases of practice of QC tools.

  10. Qlikview Audit Tool (QLIKVIEW) -

    Data.gov (United States)

    Department of Transportation — This tool supports the cyclical financial audit process. Qlikview supports large volumes of financial transaction data that can be mined, summarized and presented to...

  11. Impact of the ADT on the beam quality with high brightness beams in collision (MD2155)

    CERN Document Server

    Buffat, Xavier; Kostoglou, Sofia; Salvachua Ferrando, Belen Maria; Papadopoulou, Parthena Stefania; Ponce, Laurette; Solfaroli Camillocci, Matteo; Suykerbuyk, Ronaldus; Valuch, Daniel; Walsh, David John; Barranco Garcia, Javier; Pieloni, Tatiana; CERN. Geneva. ATS Department

    2018-01-01

    The results of an experiment aiming at determining indirectly the noise level in the LHC, isolating the contribution of the transverse damper, through their impact on the emittance of colliding high brightness bunches at 6.5 TeV in the LHC are presented.

  12. EDF group - Reference Document 2005

    International Nuclear Information System (INIS)

    2006-01-01

    The EDF Group is an integrated energy supplier operating in a wide range of electricity-related businesses: generation, transmission, distribution, sale and trading of energy. It is the main operator in the French electricity market and one of the leading electricity groups in Europe. With an installed capacity of 130.8 GW (123.9 GW in Europe), it contributes to the supply of energy and services to more than 40 million customers throughout the world (with approximately 36.7 million customers in Europe, more than 28 million of whom are in France). The EDF Group has built a business model balanced between deregulated and regulated operations in France and an international presence. In 2005, the Group recorded consolidated sales of euros 51,051 million, net income (Group share) of euros 3,242 million, and it achieved earnings before interests, taxes, depreciation and amortization of euros 13,010 million. This document is EDF Group's Reference Document for the year 2005. It contains information about: the Group activities, risk factors, Business Overview, Organizational Structure, Property, Plants and Equipment, Operating and Financial Review, Capital Resources, Research and Development, Patents and Licences, Trend Information, Financial Prospects, Administrative, Management, and Supervisory Bodies and Senior Management, Remuneration and Benefits, Board Practices, Employees/Human Resources, Major Shareholders, Related Party Transactions, Financial Information Concerning the Company's Assets and Liabilities, Financial Position and Profits and Losses, Material Contracts, Information on Holdings etc

  13. EDF group - Reference Document 2007

    International Nuclear Information System (INIS)

    2008-01-01

    The EDF Group is a leading player in the European energy industry, active in all areas of the electricity value chain, from generation to trading and network management. The leader in the French electricity market, the Group also has solid positions in the United Kingdom, Germany and Italy, with a portfolio of 38.5 million European customers and a generation fleet which is unique in the world. It intends to play a major role in the global revival of nuclear and is increasingly active in the gas chain. The Group has a sound business model, evenly balanced between regulated and deregulated activities. Given its R and D capability, its track record and expertise in nuclear, fossil-fired and hydro generation and in renewable energies, together with its energy eco-efficiency offers, EDF is well placed to deliver competitive solutions to reconcile sustainable economic growth and climate preservation. This document is EDF Group's Reference Document and Annual Financial Report for the year 2007. It contains information about Group profile, governance, business, investments, property, plant and equipment, management, financial position, human resources, shareholders, etc. The document includes the 2008 half-year financial report and consolidated financial statements, and the report drafted by the Statutory Auditors

  14. EDF group - Reference Document 2004

    International Nuclear Information System (INIS)

    2005-01-01

    The EDF Group is an integrated energy supplier operating in a wide range of electricity-related businesses: generation, transmission, distribution, sale and trading of energy. It is the main operator in the French electricity market and one of the leading electricity groups in Europe. With an installed capacity of 125,4 GW, it contributes to the supply of energy and services to more than 42 million customers throughout the world (with approximately 36 million customers in Europe, more than 28 million of whom are in France). The EDF Group has built a business model balanced between deregulated and regulated operations in France and an international presence. In 2004, the Group recorded consolidated sales of euros 46,928 million, net income (Group share) of euros 1,341 million, and it achieved earnings before interests, taxes, depreciation and amortization of euros 12,127 million. This document is EDF Group's Reference Document for the year 2004. It contains information about: the Group activities, capital, relations with Gaz de France utility, strategy, industrial environment, history, activity in France, international activity, transverse activities and functions, disputes, arbitration and risk factors, Property, Plants and Equipment, Operating and Financial Review, Administrative, Management, and Supervisory Bodies and Senior Management, Remuneration and Benefits, recent trends and perspectives

  15. EPR design tools. Integrated data processing tools

    International Nuclear Information System (INIS)

    Kern, R.

    1997-01-01

    In all technical areas, planning and design have been supported by electronic data processing for many years. New data processing tools had to be developed for the European Pressurized Water Reactor (EPR). The work to be performed was split between KWU and Framatome and laid down in the Basic Design contract. The entire plant was reduced to a logical data structure; the circuit diagrams and flowsheets of the systems were drafted, the central data pool was established, the outlines of building structures were defined, the layout of plant components was planned, and the electrical systems were documented. Also building construction engineering was supported by data processing. The tasks laid down in the Basic Design were completed as so-called milestones. Additional data processing tools also based on the central data pool are required for the phases following after the Basic Design phase, i.e Basic Design Optimization; Detailed Design; Management; Construction, and Commissioning. (orig.) [de

  16. Data Tools and Apps

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My ). Business Dynamics Statistics This tool shows tabulations on establishments, firms, and employment with

  17. Evaluating meeting support tools

    NARCIS (Netherlands)

    Post, W.M.; Huis in 't Veld, M. M.A.; Boogaard, S.A.A. van den

    2007-01-01

    Many attempts are underway for developing meeting support tools, but less attention is paid to the evaluation of meetingware. This article describes the development and testing of an instrument for evaluating meeting tools. First, we specified the object of evaluation -meetings- by means of a set of

  18. Maailma suurim tool

    Index Scriptorium Estoniae

    2000-01-01

    AS Tartu näitused, Tartu Kunstikool ja ajakiri 'Diivan' korraldavad 9.-11. III Tartu messikeskuse I paviljonis näituse 'Tool 2000'. Eksponeeritakse 2000 tooli, mille hulgast valitakse TOP 12. Messikeskuse territooriumile on kavas püstitada maailma suurim tool. Samal ajal II paviljonis kaksikmess 'Sisustus 2000' ja 'Büroo 2000'.

  19. Design mentoring tool.

    Science.gov (United States)

    2011-01-01

    In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers : mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves se...

  20. Evaluating meeting support tools

    NARCIS (Netherlands)

    Post, W.M.; Huis in't Veld, M.A.A.; Boogaard, S.A.A. van den

    2008-01-01

    Many attempts are underway for developing meeting support tools, but less attention is paid to the evaluation of meetingware. This article describes the development and testing of an instrument for evaluating meeting tools. First, we specified the object of evaluation - meetings - by means of a set

  1. Tool Storage Problem Solved!

    Science.gov (United States)

    Klenke, Andrew M.; Dell, Tim W.

    2007-01-01

    Graduates of the automotive technology program at Pittsburg State University (PSU) generally enter the workforce in some type of automotive management role. As a result, the program does not require students to purchase their own tools, and it does not have room for all 280 majors to roll around a personal tool chest. Each instructor must maintain…

  2. Benchmarking Tool Kit.

    Science.gov (United States)

    Canadian Health Libraries Association.

    Nine Canadian health libraries participated in a pilot test of the Benchmarking Tool Kit between January and April, 1998. Although the Tool Kit was designed specifically for health libraries, the content and approach are useful to other types of libraries as well. Used to its full potential, benchmarking can provide a common measuring stick to…

  3. MARKET EVALUATION MODEL: TOOL FORBUSINESS DECISIONS

    OpenAIRE

    Porlles Loarte, José; Yenque Dedios, Julio; Lavado Soto, Aurelio

    2014-01-01

    In the present work the concepts of potential market and global market are analyzed as the basis for strategic decisions of market with long term perspectives, when the implantation of a business in certain geographic area is evaluated. On this conceptual frame, the methodological tool is proposed to evaluate a commercial decision, for which it is taken as reference the case from the brewing industry in Peru, considering that this industry faces in the region entrepreneurial reorderings withi...

  4. Sensitivity of annual and seasonal reference crop ...

    Indian Academy of Sciences (India)

    scheduling and water resources management. Ref- ... time, and refers to evapotranspiration rate from a reference ... variable per unit increase in independent variable. Sensitivity ...... Pereira L S 2007 Relating water productivity and crop.

  5. Development of a reference liquid scintillation cocktail

    CSIR Research Space (South Africa)

    Van Wyn Gaardt, WM

    2006-02-01

    Full Text Available A reference system that would allow national laboratories to compare their activity measurements of non-gamma-emitting radionuclides at any time is currently being developed. The system requires a non-commercial reference-liquid scintillation...

  6. [Errors in Peruvian medical journals references].

    Science.gov (United States)

    Huamaní, Charles; Pacheco-Romero, José

    2009-01-01

    References are fundamental in our studies; an adequate selection is asimportant as an adequate description. To determine the number of errors in a sample of references found in Peruvian medical journals. We reviewed 515 scientific papers references selected by systematic randomized sampling and corroborated reference information with the original document or its citation in Pubmed, LILACS or SciELO-Peru. We found errors in 47,6% (245) of the references, identifying 372 types of errors; the most frequent were errors in presentation style (120), authorship (100) and title (100), mainly due to spelling mistakes (91). References error percentage was high, varied and multiple. We suggest systematic revision of references in the editorial process as well as to extend the discussion on this theme. references, periodicals, research, bibliometrics.

  7. Selected Reference Books of 1970-71

    Science.gov (United States)

    Sheehy, Eugene P.

    1971-01-01

    A continuation of the semiannual series, this list presents a selection of recent scholarly and foreign works of interest to reference workers in university libraries. It is not intended to be well balanced or comprehensive. (34 references) (Author/NH)

  8. Reference Structures: Stagnation, Progress, and Future Challenges.

    Science.gov (United States)

    Greenberg, Jane

    1997-01-01

    Assesses the current state of reference structures in online public access catalogs (OPACs) in a framework defined by stagnation, progress, and future challenges. Outlines six areas for reference structure development. Twenty figures provide illustrations. (AEF)

  9. Genetics Home Reference: glutaric acidemia type I

    Science.gov (United States)

    ... Glutaric acidemia type 1 in patients of Lumbee heritage from North Carolina. Mol Genet Metab. 2006 May; ... 825-8. Review. Citation on PubMed More from Genetics Home Reference Bulletins Genetics Home Reference Celebrates Its ...

  10. Expert tool use

    DEFF Research Database (Denmark)

    Thorndahl, Kathrine Liedtke; Ravn, Susanne

    2017-01-01

    on a case study of elite rope skipping, we argue that the phenomenological concept of incorporation does not suffice to adequately describe how expert tool users feel when interacting with their tools. By analyzing a combination of insights gained from participant observation of 11 elite rope skippers......According to some phenomenologists, a tool can be experienced as incorporated when, as a result of habitual use or deliberate practice, someone is able to manipulate it without conscious effort. In this article, we specifically focus on the experience of expertise tool use in elite sport. Based...... and autoethnographic material from one former elite skipper, we take some initial steps toward the development of a more nuanced understanding of the concept of incorporation; one that is able to accommodate the experiences of expert tool users. In sum, our analyses indicate that the possibility for experiencing...

  11. OOTW Force Design Tools

    Energy Technology Data Exchange (ETDEWEB)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  12. EDF group - Reference Document 2006

    International Nuclear Information System (INIS)

    2007-01-01

    The EDF Group is an integrated energy supplier operating in a wide range of electricity-related businesses: generation, transmission, distribution, sale and trading of energy. It is the main operator in the French electricity market and holds strong positions in the other three principal European markets (Germany, the United Kingdom, Italy) making it one of the leading electricity groups in Europe, and a recognized actor in the gas market. With an installed capacity of 123.7 GW in Europe (128.2 GW worldwide) it holds, among the major European energy specialists, the largest production fleet and the one emitting the least CO 2 , owing to the share of nuclear technology and hydropower in its generation mix. The EDF group supplies electricity, gas and associated services to more than 37.8 million customers throughout the world and in Europe (more than 28 million of whom are in France). The EDF Group has built a business model balanced between France and the international markets, and between deregulated and regulated operations. In 2006, the Group recorded consolidated sales of euros 58,932 million, net income (Group share) of euros 5,605 million, and it achieved earnings before interest, taxes, depreciation and amortization of euros 13,930 million. From July 1, 2007, the EDF group will carry out its trading activities in a European energy market fully open to competition. This document is EDF Group's Reference Document for the year 2006. It contains information about: the Group activities, risk factors, Business overview, Organizational structure, Property, plants and equipment, Operating and financial review, Capital resources and cash flows, Research and Development, Patents and Licenses, Trend information, Financial forecasts or estimates, Administrative, management and supervisory bodies and senior management, Remuneration and benefits, Board practices, Employees/Human resources, Major shareholders, Related party transactions, Financial information

  13. Project X: Accelerator Reference Design

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Stephen D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2013-06-20

    applications of muon spin rotation techniques provide sensitive probes of the magnetic structure of materials. Goal: Provide MW-class proton beams at 1 GeV, coupled with novel targets required to support a broad range of materials science and energy applications. Platform for Evolution to Future Frontier Facilities: A high-intensity proton source will strengthen and modernize the Fermilab injector complex, providing a robust platform upon which to build future frontier facilities. The Neutrino Factory and Muon Collider are examples that would provide world-leading capabilities at the Intensity and Energy Frontiers for many decades to come. Goal: Provide a straightforward upgrade path for a 4 MW, low-duty-factor source of protons at energies between 5 and 15 GeV. These four elements are expected to form the basis of the Mission Need statement required for the Department of Energy (DOE) Critical Decision 0 (CD-0), and represent the fundamental design criteria for Project X. The following chapters present the Reference Design for the Project X accelerator facility. The Reference Design is based on a continuous wave (CW) superconducting (SC) linac providing up to 1 and 3 MW of beam power at 1 and 3 GeV respectively. A pulsed linac provides acceleration of roughly 4% of the beam delivered from the CW linac to the 8 GeV injection energy of the existing Recycler/Main Injector complex. Upgrades to the Recycler and Main Injector support a factor of three increase, beyond current capabilities, in proton beam power at 60 to 120 GeV. The Reference Design represents a facility that will be unique in the world with unmatched capabilities for the delivery of very high beam power, with flexible beam formats, to multiple users at multiple energies. The utilization of linacs within the Project X facility enables capabilities beyond what is achievable with circular accelerators. It is anticipated that the final configuration and operating parameters of the complex will be further refined through

  14. Inertial reference frames and gravitational forces

    International Nuclear Information System (INIS)

    Santavy, I.

    1981-01-01

    The connection between different definitions of inertial, i.e. fundamental, reference frames and the corresponding characterisation of gravitational fields by gravitational forces are considered from the point of view of their possible interpretation in university introductory courses. The introduction of a special class of reference frames, denoted 'mixed reference frames' is proposed and discussed. (author)

  15. ASTM reference radiologic digital image standards

    International Nuclear Information System (INIS)

    Wysnewski, R.; Wysnewski, D.

    1996-01-01

    ASTM Reference Radiographs have been essential in defining industry's material defect grade levels for many years. ASTM Reference Radiographs are used extensively as even the American Society for Metals Nondestructive Inspection and Quality Control Metals Handbook, Volume 11, eighth edition refers to ASTM Standard Reference Radiographs. The recently published E 1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds is a prime example of the on-going need for these references. To date, 14 Standard Reference Radiographs have been published to characterize material defects. Standard Reference Radiographs do not adequately address film-less radiologic methods. There are differences in mediums to content with. On a computer CRT defect indications appear differently when compared to indications viewed in a radiograph on a view box. Industry that uses non-film radiologic methods of inspection can be burdened with additional time and money developing internal standard reference radiologic images. These references may be deemed necessary for grading levels of product defects. Because there are no ASTM Standard Reference Radiologic data files for addressing this need in the industry, the authors of this paper suggested implementing a method for their creation under ASTM supervision. ASTM can assure continuity to those users making the transition from analog radiographic images to digital image data by swiftly addressing the requirements for reference digital image standards. The current status and possible future activities regarding a method to create digital data files is presented in this paper summary

  16. COMAR - database for certified reference materials

    International Nuclear Information System (INIS)

    Klich, H.; Caliste, J.P.

    1988-01-01

    With more than 130 producers of reference materials (RM) throughout the world, it is often difficult to find the best reference material for a specific application. The computer database COMAR has been developed to aid chemists in finding the needed reference material. (orig.)

  17. 32 CFR 634.2 - References.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true References. 634.2 Section 634.2 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION Introduction § 634.2 References. Required and related publications along with prescribed and reference...

  18. Factors influencing customer satisfaction with reference and ...

    African Journals Online (AJOL)

    This paper examines factors influencing customer satisfaction with reference and information services in an academic environment. The paper identifies types of reference services in libraries, factors influencing customer satisfaction and dissatisfaction with reference and information services and suggested the way forward ...

  19. Common Frame of Reference and social justice

    NARCIS (Netherlands)

    Hesselink, M.W.; Satyanarayana, R.

    2009-01-01

    The article "Common Frame of Reference and Social Justice" by Martijn W. Hesselink evaluates the Draft Common Frame of Reference (DCFR) of social justice. It discusses the important areas, namely a common frame of Reference in a broad sense, social justice and contract law, private law and

  20. BLOCKAGE 2.5 reference manual

    International Nuclear Information System (INIS)

    Shaffer, C.J.; Brideau, J.; Rao, D.V.; Bernahl, W.

    1996-12-01

    The BLOCKAGE 2.5 code was developed by the US Nuclear Regulatory Commission (NRC) as a tool to evaluate license compliance regarding the design of suction strainers for emergency core cooling system (ECCS) pumps in boiling water reactors (BWR) as required by NRC Bulletin 96-03, ''Potential Plugging of Emergency Core Cooling Suction Strainers by Debris in Boiling Water Reactors''. Science and Engineering Associates, Inc. (SEA) and Software Edge, Inc. (SE) developed this PC-based code. The instructions to effectively use this code to evaluate the potential of debris to sufficiently block a pump suction strainer such that a pump could lose NPSH margin was documented in a User's Manual (NRC, NUREG/CR-6370). The Reference Manual contains additional information that supports the use of BLOCKAGE 2.5. It contains descriptions of the analytical models contained in the code, programmer guides illustrating the structure of the code, and summaries of coding verification and model validation exercises that were performed to ensure that the analytical models were correctly coded and applicable to the evaluation of BWR pump suction strainers. The BLOCKAGE code was developed by SEA and programmed in FORTRAN as a code that can be executed from the DOS level on a PC. A graphical users interface (GUI) was then developed by SEA to make BLOCKAGE easier to use and to provide graphical output capability. The GUI was programmed in the C language. The user has the option of executing BLOCKAGE 2.5 with the GUI or from the DOS level and the Users Manual provides instruction for both methods of execution

  1. Spreadsheet tool for estimating noise reduction costs

    International Nuclear Information System (INIS)

    Frank, L.; Senden, V.; Leszczynski, Y.

    2009-01-01

    The Northeast Capital Industrial Association (NCIA) represents industry in Alberta's industrial heartland. The organization is in the process of developing a regional noise management plan (RNMP) for their member companies. The RNMP includes the development of a noise reduction cost spreadsheet tool to conduct reviews of practical noise control treatments available for individual plant equipment, inclusive of ranges of noise attenuation achievable, which produces a budgetary prediction of the installed cost of practical noise control treatments. This paper discussed the noise reduction cost spreadsheet tool, with particular reference to noise control best practices approaches and spreadsheet tool development such as prerequisite, assembling data required, approach, and unit pricing database. Use and optimization of the noise reduction cost spreadsheet tool was also discussed. It was concluded that the noise reduction cost spreadsheet tool is an easy interactive tool to estimate implementation costs related to different strategies and options of noise control mitigating measures and was very helpful in gaining insight for noise control planning purposes. 2 tabs.

  2. EDF group - Reference Document 2009

    International Nuclear Information System (INIS)

    2010-01-01

    The EDF group is an integrated energy company with a presence in a wide range of electricity-related businesses: generation, transmission, distribution, supply and energy trading. It is France's leading electricity operator and has a strong position in the three other main European markets (Germany, the United Kingdom and Italy), making it one of Europe's leading electrical players as well as a recognized player in the gas industry. With worldwide installed power capacity totaling 136.3 GW as of December 31, 2009 (134.0 GW in Europe) and global energy generation of 618.5 TWh, it has the largest generating capacity of all the major European energy corporations with the lowest level of CO 2 emissions due to the significant proportion of nuclear and hydroelectric power in its generation mix. The EDF group supplies gas, electricity, and associated services to more than 37.9 million customer accounts worldwide (including approximately 27.7 million in France). The EDF group's businesses reflect its adoption of a model aimed at finding the best balance between French and international activities, competitive and regulated operations and based on an upstream-downstream integration. In 2009, the Group's consolidated revenues were euros 66.3 billion, the net income (Group share) was euros 3.9 billion, and earnings before interest, tax, depreciation and amortization was euros 17.5 billion. This document is EDF Group's Reference Document and Annual Financial Report for the year 2009. It contains information about: the Group activities, risk factors, Business, Organizational structure, Property plant and equipment, Operating and financial review, Capital resources and cash flows, Research and Development, Patents and Licenses, Information on trends, Financial outlook, Administrative, management, and supervisory bodies and senior management, Compensation and benefits, Functioning of the administration and management bodies, Employees/Human resources

  3. The iTREN-2030 reference scenario until 2030. Deliverable D4

    Energy Technology Data Exchange (ETDEWEB)

    Fiorello, Davide; De Stasio, Claudia; Koehler, Jonathan; Kraft, Markus; Netwon, Sean; Purwanto, Joko; Schade, Burkhard; Schade, Wolfgang; Szimba, Eckhard

    2009-07-01

    The basic objective of iTREN-2030 is to extend the forecasting and assessment capabilities of the TRANS-TOOLS transport model to the new policy issues arising from the technology, environment and energy fields. This is achieved by couplin the TRANS-TOOLS model with three other models, ASTRA, POLES and TREMOVE covering these new policy issues. The TRANS-TOOLS transport network model has been developed to constitute the reference tool for supporting transport policy in the EU and currently is being developed in several European projects. The scenario set-up to be developed in iTREN-2030 has been modified, so that the projects develops a reference scenario and an integrated scenario. For the reference scenario, the three other modelling tools are harmonised with TRANS-TOOLS and made consistent with each other. This results in a coherent scenario for Europe until 2030 for technology, transport, energy, environment and economic development. The integrated scenario will consider the changing framework conditions until 2030, inparticular the policy pressure coming from climate policy and the increasing scarcity of fossil fuels as well as the impact of the financial and economic crisis. Within the iTREN-2030 project, the overall objective of Work Package 4 (WP4) producing tis deliverable is to develop the reference scenario for the quantitative projections using the four modelling tools involved in the project. The main aims of WP4 are to (a) define a consistent framework for using the different tools in an integrated way; (b) calibrate models with exchanged input to a coherent joint reference; (c) implement external input from WP3 and running models for projections; (d) produce output procedures and templates to facilitate assessment in WP5.

  4. Recent references May through August 1992

    International Nuclear Information System (INIS)

    Ramavataram, S.

    1992-01-01

    In support of a continuing program of systematic evaluation of nuclear structure data, the National Nuclear Data Center maintains a complete computer file of references to the nuclear physics literature. Each reference is tagged by a keyword string, which indicates the kinds of data contained in the article. This master file of Nuclear Structure References (NSR) contains complete keyword indexes to literature published since 1969, with partial indexing of older references. Listed are Key Numbers and Keywords, a reaction index, and references and secondary sources for the data

  5. Electricity of machine tool

    International Nuclear Information System (INIS)

    Gijeon media editorial department

    1977-10-01

    This book is divided into three parts. The first part deals with electricity machine, which can taints from generator to motor, motor a power source of machine tool, electricity machine for machine tool such as switch in main circuit, automatic machine, a knife switch and pushing button, snap switch, protection device, timer, solenoid, and rectifier. The second part handles wiring diagram. This concludes basic electricity circuit of machine tool, electricity wiring diagram in your machine like milling machine, planer and grinding machine. The third part introduces fault diagnosis of machine, which gives the practical solution according to fault diagnosis and the diagnostic method with voltage and resistance measurement by tester.

  6. Machine tool evaluation

    International Nuclear Information System (INIS)

    Lunsford, B.E.

    1976-01-01

    Continued improvement in numerical control (NC) units and the mechanical components used in the construction of today's machine tools, necessitate the use of more precise instrumentation to calibrate and determine the capabilities of these systems. It is now necessary to calibrate most tape-control lathes to a tool-path positioning accuracy of +-300 microinches in the full slide travel and, on some special turning and boring machines, a capability of +-100 microinches must be achieved. The use of a laser interferometer to determine tool-path capabilities is described

  7. Machine Tool Software

    Science.gov (United States)

    1988-01-01

    A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

  8. User satisfaction with referrals at a collaborative virtual reference service Virtual reference services, Reference services, Referrals, User satisfaction

    Directory of Open Access Journals (Sweden)

    Nahyun Kwon

    2006-01-01

    Full Text Available Introduction. This study investigated unmonitored referrals in a nationwide, collaborative chat reference service. Specifically, it examined the extent to which questions are referred, the types of questions that are more likely to be referred than others, and the level of user satisfaction with the referrals in the collaborative chat reference service. Method. The data analysed for this study were 420 chat reference transaction transcripts along with corresponding online survey questionnaires submitted by the service users. Both sets of data were collected from an electronic archive of a southeastern state public library system that has participated in 24/7 Reference of the Metropolitan Cooperative Library System (MCLS. Results. Referrals in the collaborative chat reference service comprised approximately 30% of the total transactions. Circulation-related questions were the most often referred among all question types, possibly because of the inability of 'outside' librarians to access patron accounts. Most importantly, user satisfaction with referrals was found to be significantly lower than that of completed answers. Conclusion. The findings of this study addressed the importance of distinguishing two types of referrals: the expert research referrals conducive to collaborative virtual reference services; and the re-directional local referrals that increase unnecessary question traffic, thereby being detrimental to effective use of collaborative reference. Continuing efforts to conceptualize referrals in multiple dimensions are anticipated to fully grasp complex phenomena underlying referrals.

  9. Weather Test Reference Year of Greenland

    DEFF Research Database (Denmark)

    Kragh, Jesper; Pedersen, Frank; Svendsen, Svend

    2005-01-01

    the construction of two test reference years of Greenland used in the work of establishing new energy frame for the coming building code of Greenland. The first test reference year is constructed using measurements of climatic parameters from the town Nuuk located in the southwestern part of Greenland. The second...... test reference year is constructed using measurements from the town Uummannaq located in the north part of Greenland on the west coast. The construction of the test reference years fulfills the procedures described in the standard EN ISO 15927-4 using the following main weather parameters: Dry bulb...... temperature, global radiation, relative humidity and mean wind speed. To construct the test reference years a program called REFYEAR was developed in MatLab. REFYEAR automatically constructs the test reference year using an input file containing the climatic measurements. The two constructed test reference...

  10. Testing the causal theory of reference.

    Science.gov (United States)

    Domaneschi, Filippo; Vignolo, Massimiliano; Di Paola, Simona

    2017-04-01

    Theories of reference are a crucial research topic in analytic philosophy. Since the publication of Kripke's Naming and Necessity, most philosophers have endorsed the causal/historical theory of reference. The goal of this paper is twofold: (i) to discuss a method for testing experimentally the causal theory of reference for proper names by investigating linguistic usage and (ii) to present the results from two experiments conducted with that method. Data collected in our experiments confirm the causal theory of reference for people proper names and for geographical proper names. A secondary but interesting result is that the semantic domain affects reference assignment: while with people proper names speakers tend to assign the semantic reference, with geographical proper names they are prompted to assign the speaker's reference. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Methods to estimate irrigated reference crop evapotranspiration - a review.

    Science.gov (United States)

    Kumar, R; Jat, M K; Shankar, V

    2012-01-01

    Efficient water management of crops requires accurate irrigation scheduling which, in turn, requires the accurate measurement of crop water requirement. Irrigation is applied to replenish depleted moisture for optimum plant growth. Reference evapotranspiration plays an important role for the determination of water requirements for crops and irrigation scheduling. Various models/approaches varying from empirical to physically base distributed are available for the estimation of reference evapotranspiration. Mathematical models are useful tools to estimate the evapotranspiration and water requirement of crops, which is essential information required to design or choose best water management practices. In this paper the most commonly used models/approaches, which are suitable for the estimation of daily water requirement for agricultural crops grown in different agro-climatic regions, are reviewed. Further, an effort has been made to compare the accuracy of various widely used methods under different climatic conditions.

  12. Precision Tiltmeter as a Reference for Slope MeasuringInstruments

    Energy Technology Data Exchange (ETDEWEB)

    Kirschman, Jonathan L.; Domning, Edward E.; Morrison, Gregory Y.; Smith, Brian V.; Yashchuk, Valeriy V.

    2007-08-01

    The next generation of synchrotrons and free electron lasers require extremely high-performance x-ray optical systems for proper focusing. The necessary optics cannot be fabricated without the use of precise optical metrology instrumentation. In particular, the Long Trace Profiler (LTP) based on the pencil-beam interferometer is a valuable tool for low-spatial-frequency slope measurement with x-ray optics. The limitations of such a device are set by the amount of systematic errors and noise. A significant improvement of LTP performance was the addition of an optical reference channel, which allowed to partially account for systematic errors associated with wiggling and wobbling of the LTP carriage. However, the optical reference is affected by changing optical path length, non-homogeneous optics, and air turbulence. In the present work, we experimentally investigate the questions related to the use of a precision tiltmeter as a reference channel. Dependence of the tiltmeter performance on horizontal acceleration, temperature drift, motion regime, and kinematical scheme of the translation stage has been investigated. It is shown that at an appropriate experimental arrangement, the tiltmeter provides a slope reference for the LTP system with accuracy on the level of 0.1 {micro}rad (rms).

  13. Precision Tiltmeter as a Reference for Slope Measuring Instruments

    International Nuclear Information System (INIS)

    Kirschman, Jonathan L.; Domning, Edward E.; Morrison, Gregory Y.; Smith, Brian V.; Yashchuk, Valeriy V.

    2007-01-01

    The next generation of synchrotrons and free electron lasers require extremely high-performance x-ray optical systems for proper focusing. The necessary optics cannot be fabricated without the use of precise optical metrology instrumentation. In particular, the Long Trace Profiler (LTP) based on the pencil-beam interferometer is a valuable tool for low-spatial-frequency slope measurement with x-ray optics. The limitations of such a device are set by the amount of systematic errors and noise. A significant improvement of LTP performance was the addition of an optical reference channel, which allowed to partially account for systematic errors associated with wiggling and wobbling of the LTP carriage. However, the optical reference is affected by changing optical path length, non-homogeneous optics, and air turbulence. In the present work, we experimentally investigate the questions related to the use of a precision tiltmeter as a reference channel. Dependence of the tiltmeter performance on horizontal acceleration, temperature drift, motion regime, and kinematical scheme of the translation stage has been investigated. It is shown that at an appropriate experimental arrangement, the tiltmeter provides a slope reference for the LTP system with accuracy on the level of 0.1 (micro)rad (rms)

  14. Determination of polybrominated diphenyl ethers in environmental standard reference materials

    Energy Technology Data Exchange (ETDEWEB)

    Stapleton, Heather M.; Schantz, Michele M.; Wise, Stephen A. [National Institute of Standards and Technology, Analytical Chemistry Division, Gaithersburg, MD (United States); Keller, Jennifer M.; Kucklick, John R. [National Institute of Standards and Technology, Analytical Chemistry Division, Hollings Marine Laboratory, Charleston, SC (United States); Leigh, Stefan D. [National Institute of Standards and Technology, Statistical Engineering Division, Gaithersburg, MD (United States)

    2007-04-15

    Standard reference materials (SRMs) are valuable tools in developing and validating analytical methods to improve quality assurance standards. The National Institute of Standards and Technology (NIST) has a long history of providing environmental SRMs with certified concentrations of organic and inorganic contaminants. Here we report on new certified and reference concentrations for 27 polybrominated diphenyl ether (PBDE) congeners in seven different SRMs: cod-liver oil, whale blubber, fish tissue (two materials), mussel tissue and sediment (two materials). PBDEs were measured in these SRMs, with the lowest concentrations measured in mussel tissue (SRM 1974b) and the highest in sediment collected from the New York/New Jersey Waterway (SRM 1944). Comparing the relative PBDE congener concentrations within the samples, we found the biota SRMs contained primarily tetrabrominated and pentabrominated diphenyl ethers, whereas the sediment SRMs contained primarily decabromodiphenyl ether (BDE 209). The cod-liver oil (SRM 1588b) and whale blubber (SRM 1945) materials were also found to contain measurable concentrations of two methoxylated PBDEs (MeO-BDEs). Certified and reference concentrations are reported for 12 PBDE congeners measured in the biota SRMs and reference values are available for two MeO-BDEs. Results from a sediment interlaboratory comparison PBDE exercise are available for the two sediment SRMs (1941b and 1944). (orig.)

  15. An approach to an acute emotional stress reference scale.

    Science.gov (United States)

    Garzon-Rey, J M; Arza, A; de-la-Camara, C; Lobo, A; Armario, A; Aguilo, J

    2017-06-16

    The clinical diagnosis aims to identify the degree of affectation of the psycho-physical state of the patient as a guide to therapeutic intervention. In stress, the lack of a measurement tool based on a reference makes it difficult to quantitatively assess this degree of affectation. To define and perform a primary assessment of a standard reference in order to measure acute emotional stress from the markers identified as indicators of the degree. Psychometric tests and biochemical variables are, in general, the most accepted stress measurements by the scientific community. Each one of them probably responds to different and complementary processes related to the reaction to a stress stimulus. The reference that is proposed is a weighted mean of these indicators by assigning them relative weights in accordance with a principal components analysis. An experimental study was conducted on 40 healthy young people subjected to the psychosocial stress stimulus of the Trier Social Stress Test in order to perform a primary assessment and consistency check of the proposed reference. The proposed scale clearly differentiates between the induced relax and stress states. Accepting the subjectivity of the definition and the lack of a subsequent validation with new experimental data, the proposed standard differentiates between a relax state and an emotional stress state triggered by a moderate stress stimulus, as it is the Trier Social Stress Test. The scale is robust. Although the variations in the percentage composition slightly affect the score, but they do not affect the valid differentiation between states.

  16. Game development tool essentials

    CERN Document Server

    Berinstein, Paula; Ardolino, Alessandro; Franco, Simon; Herubel, Adrien; McCutchan, John; Nedelcu, Nicusor; Nitschke, Benjamin; Olmstead, Don; Robinet, Fabrice; Ronchi, Christian; Turkowski, Rita; Walter, Robert; Samour, Gustavo

    2014-01-01

    Offers game developers new techniques for streamlining the critical game tools pipeline. Inspires game developers to share their secrets and improve the productivity of the entire industry. Helps game industry practitioners compete in a hyper-competitive environment.

  17. Tool Inventory and Replacement

    Science.gov (United States)

    Bear, W. Forrest

    1976-01-01

    Vocational agriculture teachers are encouraged to evaluate curriculum offerings, the new trends in business and industry, and develop a master tool purchase and replacement plan over a 3- to 5-year period. (HD)

  18. ATO Resource Tool -

    Data.gov (United States)

    Department of Transportation — Cru-X/ART is a shift management tool designed for?use by operational employees in Air Traffic Facilities.? Cru-X/ART is used for shift scheduling, shift sign in/out,...

  19. Water Budget Tool

    Science.gov (United States)

    If you're designing a new landscape or rethinking your current one, the WaterSense Water Budget Tool will tell you if you have designed a landscape that will use an appropriate amount of water for your climate.

  20. Neighborhood Mapping Tool

    Data.gov (United States)

    Department of Housing and Urban Development — This tool assists the public and Choice Neighborhoods applicants to prepare data to submit with their grant application by allowing applicants to draw the exact...

  1. Sequence History Update Tool

    Science.gov (United States)

    Khanampompan, Teerapat; Gladden, Roy; Fisher, Forest; DelGuercio, Chris

    2008-01-01

    The Sequence History Update Tool performs Web-based sequence statistics archiving for Mars Reconnaissance Orbiter (MRO). Using a single UNIX command, the software takes advantage of sequencing conventions to automatically extract the needed statistics from multiple files. This information is then used to populate a PHP database, which is then seamlessly formatted into a dynamic Web page. This tool replaces a previous tedious and error-prone process of manually editing HTML code to construct a Web-based table. Because the tool manages all of the statistics gathering and file delivery to and from multiple data sources spread across multiple servers, there is also a considerable time and effort savings. With the use of The Sequence History Update Tool what previously took minutes is now done in less than 30 seconds, and now provides a more accurate archival record of the sequence commanding for MRO.

  2. Microgrid Analysis Tools Summary

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Antonio [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Haase, Scott G [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mathur, Shivani [Formerly NREL

    2018-03-05

    The over-arching goal of the Alaska Microgrid Partnership is to reduce the use of total imported fuel into communities to secure all energy services by at least 50% in Alaska's remote microgrids without increasing system life cycle costs while also improving overall system reliability, security, and resilience. One goal of the Alaska Microgrid Partnership is to investigate whether a combination of energy efficiency and high-contribution (from renewable energy) power systems can reduce total imported energy usage by 50% while reducing life cycle costs and improving reliability and resiliency. This presentation provides an overview of the following four renewable energy optimization tools. Information is from respective tool websites, tool developers, and author experience. Distributed Energy Resources Customer Adoption Model (DER-CAM) Microgrid Design Toolkit (MDT) Renewable Energy Optimization (REopt) Tool Hybrid Optimization Model for Electric Renewables (HOMER).

  3. Financing Alternatives Comparison Tool

    Science.gov (United States)

    FACT is a financial analysis tool that helps identify the most cost-effective method to fund a wastewater or drinking water management project. It produces a comprehensive analysis that compares various financing options.

  4. Breastfeeding assessment tools

    International Nuclear Information System (INIS)

    Bizouerne, Cécile; Kerac, Marko; Macgrath, Marie

    2014-01-01

    Full text: Breastfeeding plays a major role in reducing the global burden of child mortality and under-nutrition. Whilst many programmes aim to support breastfeeding and prevent feeding problems occurring, interventions are also needed once they have developed. In this situation, accurate assessment of a problem is critical to inform prognosis and enables tailored, appropriate treatment. The presentation will present a review, which aims to identify breastfeeding assessment tools/checklists for use in assessing malnourished infants in poor resource settings. The literature review identified 24 breastfeeding assessment tools, and 41 validation studies. Evidence underpinning most of the tools was mainly low quality, and conducted in high-income countries and hospital settings. The presentation will describe the main findings of the literature review and propose recommendations for improving existing tools in order to appropriately assess malnourished infants and enable early, appropriate intervention and treatment of malnutrition. (author)

  5. Personal Wellness Tools

    Science.gov (United States)

    ... of Personal Stories Peers Celebrating Art Peers Celebrating Music Be Vocal Support Locator DBSA In-Person Support ... With this tool, you can track key health trends related to the following: Overall mood Mood disorder ...

  6. Cash Reconciliation Tool

    Data.gov (United States)

    US Agency for International Development — CART is a cash reconciliation tool that allows users to reconcile Agency cash disbursements with Treasury fund balances; track open unreconciled items; and create an...

  7. Chemical Data Access Tool

    Data.gov (United States)

    U.S. Environmental Protection Agency — This tool is intended to aid individuals interested in learning more about chemicals that are manufactured or imported into the United States. Health and safety...

  8. Tools and their uses

    CERN Document Server

    1973-01-01

    Teaches names, general uses, and correct operation of all basic hand and power tools, fasteners, and measuring devices you are likely to need. Also, grinding, metal cutting, soldering, and more. 329 illustrations.

  9. Chatter and machine tools

    CERN Document Server

    Stone, Brian

    2014-01-01

    Focussing on occurrences of unstable vibrations, or Chatter, in machine tools, this book gives important insights into how to eliminate chatter with associated improvements in product quality, surface finish and tool wear. Covering a wide range of machining processes, including turning, drilling, milling and grinding, the author uses his research expertise and practical knowledge of vibration problems to provide solutions supported by experimental evidence of their effectiveness. In addition, this book contains links to supplementary animation programs that help readers to visualise the ideas detailed in the text. Advancing knowledge in chatter avoidance and suggesting areas for new innovations, Chatter and Machine Tools serves as a handbook for those desiring to achieve significant reductions in noise, longer tool and grinding wheel life and improved product finish.

  10. Learning Design Tools

    NARCIS (Netherlands)

    Griffiths, David; Blat, Josep; Garcia, Rocío; Vogten, Hubert; Kwong, KL

    2005-01-01

    Griffiths, D., Blat, J., Garcia, R., Vogten, H. & Kwong, KL. (2005). Learning Design Tools. In: Koper, R. & Tattersall, C., Learning Design: A Handbook on Modelling and Delivering Networked Education and Training (pp. 109-136). Berlin-Heidelberg: Springer Verlag.

  11. Clean Energy Finance Tool

    Science.gov (United States)

    State and local governments interested in developing a financing program can use this Excel tool to support energy efficiency and clean energy improvements for large numbers of buildings within their jurisdiction.

  12. Mapping Medicare Disparities Tool

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CMS Office of Minority Health has designed an interactive map, the Mapping Medicare Disparities Tool, to identify areas of disparities between subgroups of...

  13. Recovery Action Mapping Tool

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Recovery Action Mapping Tool is a web map that allows users to visually interact with and query actions that were developed to recover species listed under the...

  14. Friction stir welding tool

    Science.gov (United States)

    Tolle,; Charles R. , Clark; Denis E. , Barnes; Timothy, A [Ammon, ID

    2008-04-15

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  15. Reference costs for power generation

    International Nuclear Information System (INIS)

    2003-12-01

    The first part of the 2003 study of reference costs for power generation has been completed. It was carried out by the General Directorate for Energy and Raw Materials (DGEMP) of the French Ministry of the Economy, Finance and Industry, with the collaboration of power-plant operators, construction firms and many other experts. A Review Committee of experts including economists (Forecasting Department, French Planning Office), qualified public figures, representatives of power-plant construction firms and operators, and non-governmental organization (NGO) experts, was consulted in the final phase. The study examines the costs of power generated by different methods (i.e. nuclear and fossil-fuel [gas-, coal-, and oil-fired] power plants) in the context of an industrial operation beginning in the year 2015. - The second part of the study relating to decentralized production methods (wind, photovoltaic, combined heat and power) is still in progress and will be presented at the beginning of next year. - 1. Study approach: The study is undertaken mainly from an investor's perspective and uses an 8% discount rate to evaluate the expenses and receipts from different years. In addition, the investment costs are considered explicitly in terms of interest during construction. - 2. Plant operating on a full-time basis (year-round): The following graph illustrates the main conclusions of the study for an effective operating period of 8000 hours. It can be seen that nuclear is more competitive than the other production methods for a year-round operation with an 8% discount rate applied to expenses. This competitiveness is even better if the costs related to greenhouse-gas (CO 2 ) emission are taken into account in estimating the MWh cost price. Integrating the costs resulting from CO 2 emissions by non-nuclear fuels (gas, coal), which will be compulsory as of 2004 with the transposition of European directives, increases the total cost per MWh of these power generation methods

  16. CMS offline web tools

    International Nuclear Information System (INIS)

    Metson, S; Newbold, D; Belforte, S; Kavka, C; Bockelman, B; Dziedziniewicz, K; Egeland, R; Elmer, P; Eulisse, G; Tuura, L; Evans, D; Fanfani, A; Feichtinger, D; Kuznetsov, V; Lingen, F van; Wakefield, S

    2008-01-01

    We describe a relatively new effort within CMS to converge on a set of web based tools, using state of the art industry techniques, to engage with the CMS offline computing system. CMS collaborators require tools to monitor various components of the computing system and interact with the system itself. The current state of the various CMS web tools is described along side current planned developments. The CMS collaboration comprises of nearly 3000 people from all over the world. As well as its collaborators, its computing resources are spread all over globe and are accessed via the LHC grid to run analysis, large scale production and data transfer tasks. Due to the distributed nature of collaborators effective provision of collaborative tools is essential to maximise physics exploitation of the CMS experiment, especially when the size of the CMS data set is considered. CMS has chosen to provide such tools over the world wide web as a top level service, enabling all members of the collaboration to interact with the various offline computing components. Traditionally web interfaces have been added in HEP experiments as an afterthought. In the CMS offline we have decided to put web interfaces, and the development of a common CMS web framework, on an equal footing with the rest of the offline development. Tools exist within CMS to transfer and catalogue data (PhEDEx and DBS/DLS), run Monte Carlo production (ProdAgent) and submit analysis (CRAB). Effective human interfaces to these systems are required for users with different agendas and practical knowledge of the systems to effectively use the CMS computing system. The CMS web tools project aims to provide a consistent interface to all these tools

  17. Quality management tool

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae Hun

    2011-09-15

    This book introduces basic conception of quality with characteristic, price, cost, and function, basic conception on quality management, introduction and operation of quality management, quality guaranteed and claim like handling of claim of goods, standards, and quality guaranteed method, basic tools of quality management such as Pareto diagram, characteristic diagram, cause-and-effect, fish born diagram check sheet histogram scatter diagram graph and stratification new seven tools of QC, quality deployment function and measurement system.

  18. Quality management tool

    International Nuclear Information System (INIS)

    Lee, Tae Hun

    2011-09-01

    This book introduces basic conception of quality with characteristic, price, cost, and function, basic conception on quality management, introduction and operation of quality management, quality guaranteed and claim like handling of claim of goods, standards, and quality guaranteed method, basic tools of quality management such as Pareto diagram, characteristic diagram, cause-and-effect, fish born diagram check sheet histogram scatter diagram graph and stratification new seven tools of QC, quality deployment function and measurement system.

  19. Stochastic tools in turbulence

    CERN Document Server

    Lumey, John L

    2012-01-01

    Stochastic Tools in Turbulence discusses the available mathematical tools to describe stochastic vector fields to solve problems related to these fields. The book deals with the needs of turbulence in relation to stochastic vector fields, particularly, on three-dimensional aspects, linear problems, and stochastic model building. The text describes probability distributions and densities, including Lebesgue integration, conditional probabilities, conditional expectations, statistical independence, lack of correlation. The book also explains the significance of the moments, the properties of the

  20. CMS offline web tools

    Energy Technology Data Exchange (ETDEWEB)

    Metson, S; Newbold, D [H.H. Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Belforte, S; Kavka, C [INFN, Sezione di Trieste (Italy); Bockelman, B [University of Nebraska Lincoln, Lincoln, NE (United States); Dziedziniewicz, K [CERN, Geneva (Switzerland); Egeland, R [University of Minnesota Twin Cities, Minneapolis, MN (United States); Elmer, P [Princeton (United States); Eulisse, G; Tuura, L [Northeastern University, Boston, MA (United States); Evans, D [Fermilab MS234, Batavia, IL (United States); Fanfani, A [Universita degli Studi di Bologna (Italy); Feichtinger, D [PSI, Villigen (Switzerland); Kuznetsov, V [Cornell University, Ithaca, NY (United States); Lingen, F van [California Institute of Technology, Pasedena, CA (United States); Wakefield, S [Blackett Laboratory, Imperial College, London (United Kingdom)

    2008-07-15

    We describe a relatively new effort within CMS to converge on a set of web based tools, using state of the art industry techniques, to engage with the CMS offline computing system. CMS collaborators require tools to monitor various components of the computing system and interact with the system itself. The current state of the various CMS web tools is described along side current planned developments. The CMS collaboration comprises of nearly 3000 people from all over the world. As well as its collaborators, its computing resources are spread all over globe and are accessed via the LHC grid to run analysis, large scale production and data transfer tasks. Due to the distributed nature of collaborators effective provision of collaborative tools is essential to maximise physics exploitation of the CMS experiment, especially when the size of the CMS data set is considered. CMS has chosen to provide such tools over the world wide web as a top level service, enabling all members of the collaboration to interact with the various offline computing components. Traditionally web interfaces have been added in HEP experiments as an afterthought. In the CMS offline we have decided to put web interfaces, and the development of a common CMS web framework, on an equal footing with the rest of the offline development. Tools exist within CMS to transfer and catalogue data (PhEDEx and DBS/DLS), run Monte Carlo production (ProdAgent) and submit analysis (CRAB). Effective human interfaces to these systems are required for users with different agendas and practical knowledge of the systems to effectively use the CMS computing system. The CMS web tools project aims to provide a consistent interface to all these tools.

  1. Reference Design of the Mu2e Detector Solenoid

    CERN Document Server

    Feher, S; Brandt,, J; Cheban, S; Coleman, R; Dhanaraj, N; Fang, I; Lamm, M; Lombardo, V; Lopes, M; Miller, J; Ostojic, R ,; Orris, D; Page, T; Peterson, T; Tang, Z; Wands, R

    2014-01-01

    The Mu2e experiment at Fermilab has been approved by the Department of Energy to proceed developing the preliminary design. Integral to the success of Mu2e is the superconducting solenoid system. One of the three major solenoids is the Detector Solenoid that houses the stopping target and the detectors. The goal of the Detector Solenoid team is to produce detailed design specifications that are sufficient for vendors to produce the final design drawings, tooling and fabrication procedures and proceed to production. In this paper we summarize the Reference Design of the Detector Solenoid.

  2. A methodology for uncertainty analysis of reference equations of state

    DEFF Research Database (Denmark)

    Cheung, Howard; Frutiger, Jerome; Bell, Ian H.

    We present a detailed methodology for the uncertainty analysis of reference equations of state (EOS) based on Helmholtz energy. In recent years there has been an increased interest in uncertainties of property data and process models of thermal systems. In the literature there are various...... for uncertainty analysis is suggested as a tool for EOS. The uncertainties of the EOS properties are calculated from the experimental values and the EOS model structure through the parameter covariance matrix and subsequent linear error propagation. This allows reporting the uncertainty range (95% confidence...

  3. Tools used for hand deburring

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1981-03-01

    This guide is designed to help in quick identification of those tools most commonly used to deburr hand size or smaller parts. Photographs and textual descriptions are used to provide rapid yet detailed information. The data presented include the Bendix Kansas City Division coded tool number, tool description, tool crib in which the tool can be found, the maximum and minimum inventory requirements, the cost of each tool, and the number of the illustration that shows the tool.

  4. HDF-EOS Dump Tools

    Science.gov (United States)

    Prasad, U.; Rahabi, A.

    2001-05-01

    Descriptor file (.desc) as the reference. The tool takes (.desc), and (.met) an ODL file as inputs, and generates a simple output file contains the results of the checking process.

  5. Survey of reference materials. V. 2: Environmentally related reference materials for trace elements, nuclides and microcontaminants

    International Nuclear Information System (INIS)

    1996-05-01

    The present report presently contains over 250 reference materials with trace element and organic contaminant information on fuel, geological and mineral, anthropogenic disposal, soil reference and miscellaneous reference materials. Not included in the current report is information on most biological and environmental reference materials with trace element, stable isotope, radioisotope and organic contaminant information. 8 refs, tabs

  6. Physics analysis tools

    International Nuclear Information System (INIS)

    Kunz, P.F.

    1991-04-01

    There are many tools used in analysis in High Energy Physics (HEP). They range from low level tools such as a programming language to high level such as a detector simulation package. This paper will discuss some aspects of these tools that are directly associated with the process of analyzing HEP data. Physics analysis tools cover the whole range from the simulation of the interactions of particles to the display and fitting of statistical data. For purposes of this paper, the stages of analysis is broken down to five main stages. The categories are also classified as areas of generation, reconstruction, and analysis. Different detector groups use different terms for these stages thus it is useful to define what is meant by them in this paper. The particle generation stage is a simulation of the initial interaction, the production of particles, and the decay of the short lived particles. The detector simulation stage simulates the behavior of an event in a detector. The track reconstruction stage does pattern recognition on the measured or simulated space points, calorimeter information, etc., and reconstructs track segments of the original event. The event reconstruction stage takes the reconstructed tracks, along with particle identification information and assigns masses to produce 4-vectors. Finally the display and fit stage displays statistical data accumulated in the preceding stages in the form of histograms, scatter plots, etc. The remainder of this paper will consider what analysis tools are available today, and what one might expect in the future. In each stage, the integration of the tools with other stages and the portability of the tool will be analyzed

  7. Reference Correction to: Making Air Pollution Visible: A Tool for Promoting Environmental Health Literacy.

    Science.gov (United States)

    Galkina Cleary, Ekaterina; Patton, Allison P; Wu, Hsin-Ching; Xie, Alan; Stubblefield, Joseph; Mass, William; Grinstein, Georges; Koch-Weser, Susan; Brugge, Doug; Wong, Carolyn

    2017-12-20

    [This corrects the article DOI: 10.2196/publichealth.7492.]. ©Ekaterina Galkina Cleary, Allison P Patton, Hsin-Ching Wu, Alan Xie, Joseph Stubblefield, William Mass, Georges Grinstein, Susan Koch-Weser, Doug Brugge, Carolyn Wong. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 20.12.2017.

  8. The Cerefy Atlas of brain anatomy. An interactive reference tool for students, teachers and researchers

    International Nuclear Information System (INIS)

    Nowinski, W.L.; Thirunavuukarasuu, A.; Bryan, R.N.

    2002-01-01

    The Cerefy registered Atlas of Brain Anatomy is a remarkable accomplishment combining the best of current neuroanatomical methodology with the amazing capability of the modern personal computer. This CD-ROM not only demonstrates the power of digital technology, but also provides a view of the future of medical education. Through the use of magnetic resonance images (MRI) combined with interactive image labeling it is possible to use this CD-ROM to rapidly name any structure within the brain in three planes of section presented simultaneously. With the simple click of a mouse of most intricate of brain structures can be identified in sagittal, axial, and coronal planes. By selecting the ''label'' function, whatever brain structure the cursor is placed upon is named in real time. It is possible to literally browse across the brain and watch every structure that is touched be named on the screen as fast as you can move the cursor. This incredible functionality is further enhanced by the ability to select the test mode and provide a self-guided quiz of neuroanatomy. This atlas is perfect for preparing teaching materials as it also contains a ''save'' function to preserve labeled images. This low-cost CD-ROM will no doubt be used by those who study and/or teach neuroanatomy, neurology, neurosurgery, neuroradiology, neuroscience, neuropsychology, and psychiatry. This unique contribution to the field of neuroanatomy is a most impressive accomplishment. (orig.)

  9. EPOS Multi-Scale Laboratory platform: a long-term reference tool for experimental Earth Sciences

    Science.gov (United States)

    Trippanera, Daniele; Tesei, Telemaco; Funiciello, Francesca; Sagnotti, Leonardo; Scarlato, Piergiorgio; Rosenau, Matthias; Elger, Kirsten; Ulbricht, Damian; Lange, Otto; Calignano, Elisa; Spiers, Chris; Drury, Martin; Willingshofer, Ernst; Winkler, Aldo

    2017-04-01

    With continuous progress on scientific research, a large amount of datasets has been and will be produced. The data access and sharing along with their storage and homogenization within a unique and coherent framework is a new challenge for the whole scientific community. This is particularly emphasized for geo-scientific laboratories, encompassing the most diverse Earth Science disciplines and typology of data. To this aim the "Multiscale Laboratories" Work Package (WP16), operating in the framework of the European Plate Observing System (EPOS), is developing a virtual platform of geo-scientific data and services for the worldwide community of laboratories. This long-term project aims at merging the top class multidisciplinary laboratories in Geoscience into a coherent and collaborative network, facilitating the standardization of virtual access to data, data products and software. This will help our community to evolve beyond the stage in which most of data produced by the different laboratories are available only within the related scholarly publications (often as print-version only) or they remain unpublished and inaccessible on local devices. The EPOS multi-scale laboratory platform will provide the possibility to easily share and discover data by means of open access, DOI-referenced, online data publication including long-term storage, managing and curation services and to set up a cohesive community of laboratories. The WP16 is starting with three pilot cases laboratories: (1) rock physics, (2) palaeomagnetic, and (3) analogue modelling. As a proof of concept, first analogue modelling datasets have been published via GFZ Data Services (http://doidb.wdc-terra.org/search/public/ui?&sort=updated+desc&q=epos). The datasets include rock analogue material properties (e.g. friction data, rheology data, SEM imagery), as well as supplementary figures, images and movies from experiments on tectonic processes. A metadata catalogue tailored to the specific communities will link the growing number of datasets to a centralized EPOS hub. Acknowledging the fact that we are dealing with a variety in levels of maturity regarding available data infrastructures within the different labs, we have set up an architecture that provides different scenarios for participation. Thus, research groups which do not have access to localized repositories and catalogues for sustainable storage of data and metadata can rely on shared services within the Multi-scale Laboratories community. As an example of the usage of data retrieved through the community, an experimentalist willing to decide which material is suitable for his experimental setup can get "virtual lab access" to retrieve information about material parameters with a minimum effort and then may decide to move in a specific laboratory equipped with the instruments needed. The currently participating and collaborating laboratories (Utrecht University, GFZ, Roma Tre University, INGV, NERC, CSIC-ICTJA, CNRS, LMU, UBI, ETH, CNR) warmly welcome everyone who is interested in participating at the development of this project.

  10. The Cerefy Atlas of brain anatomy. An interactive reference tool for students, teachers and researchers

    Energy Technology Data Exchange (ETDEWEB)

    Nowinski, W.L.; Thirunavuukarasuu, A.; Bryan, R.N.

    2002-07-01

    The Cerefy {sup registered} Atlas of Brain Anatomy is a remarkable accomplishment combining the best of current neuroanatomical methodology with the amazing capability of the modern personal computer. This CD-ROM not only demonstrates the power of digital technology, but also provides a view of the future of medical education. Through the use of magnetic resonance images (MRI) combined with interactive image labeling it is possible to use this CD-ROM to rapidly name any structure within the brain in three planes of section presented simultaneously. With the simple click of a mouse of most intricate of brain structures can be identified in sagittal, axial, and coronal planes. By selecting the ''label'' function, whatever brain structure the cursor is placed upon is named in real time. It is possible to literally browse across the brain and watch every structure that is touched be named on the screen as fast as you can move the cursor. This incredible functionality is further enhanced by the ability to select the test mode and provide a self-guided quiz of neuroanatomy. This atlas is perfect for preparing teaching materials as it also contains a ''save'' function to preserve labeled images. This low-cost CD-ROM will no doubt be used by those who study and/or teach neuroanatomy, neurology, neurosurgery, neuroradiology, neuroscience, neuropsychology, and psychiatry. This unique contribution to the field of neuroanatomy is a most impressive accomplishment. (orig.)

  11. Writing more informative letters of reference.

    Science.gov (United States)

    Wright, Scott M; Ziegelstein, Roy C

    2004-05-01

    Writing a meaningful and valuable letter of reference is not an easy task. Several factors influence the quality of any letter of reference. First, the accuracy and reliability of the writer's impressions and judgment depend on how well he knows the individual being described. Second, the writer's frame of reference, which is determined by the number of persons at the same level that he has worked with, will impact the context and significance of his beliefs and estimations. Third, the letter-writing skills of the person composing the letter will naturally affect the letter. To support the other components of a candidate's application, a letter of reference should provide specific examples of how an individual's behavior or attitude compares to a reference group and should assess "intangibles" that are hard to glean from a curriculum vitae or from test scores. This report offers suggestions that should help physicians write more informative letters of reference.

  12. Appraisal tools for clinical practice guidelines: a systematic review.

    Directory of Open Access Journals (Sweden)

    Ulrich Siering

    Full Text Available Clinical practice guidelines can improve healthcare processes and patient outcomes, but are often of low quality. Guideline appraisal tools aim to help potential guideline users in assessing guideline quality. We conducted a systematic review of publications describing guideline appraisal tools in order to identify and compare existing tools.Among others we searched MEDLINE, EMBASE and the Cochrane Database of Systematic Reviews from 1995 to May 2011 for relevant primary and secondary publications. We also handsearched the reference lists of relevant publications. On the basis of the available literature we firstly generated 34 items to be used in the comparison of appraisal tools and grouped them into thirteen quality dimensions. We then extracted formal characteristics as well as questions and statements of the appraisal tools and assigned them to the items.We identified 40 different appraisal tools. They covered between three and thirteen of the thirteen possible quality dimensions and between three and 29 of the possible 34 items. The main focus of the appraisal tools were the quality dimensions "evaluation of evidence" (mentioned in 35 tools; 88%, "presentation of guideline content" (34 tools; 85%, "transferability" (33 tools; 83%, "independence" (32 tools; 80%, "scope" (30 tools; 75%, and "information retrieval" (29 tools; 73%. The quality dimensions "consideration of different perspectives" and "dissemination, implementation and evaluation of the guideline" were covered by only twenty (50% and eighteen tools (45% respectively.Most guideline appraisal tools assess whether the literature search and the evaluation, synthesis and presentation of the evidence in guidelines follow the principles of evidence-based medicine. Although conflicts of interest and norms and values of guideline developers, as well as patient involvement, affect the trustworthiness of guidelines, they are currently insufficiently considered. Greater focus should be

  13. Writing More Informative Letters of Reference

    OpenAIRE

    Wright, Scott M; Ziegelstein, Roy C

    2004-01-01

    Writing a meaningful and valuable letter of reference is not an easy task. Several factors influence the quality of any letter of reference. First, the accuracy and reliability of the writer's impressions and judgment depend on how well he knows the individual being described. Second, the writer's frame of reference, which is determined by the number of persons at the same level that he has worked with, will impact the context and significance of his beliefs and estimations. Third, the letter...

  14. A statistically robust EEG re-referencing procedure to mitigate reference effect

    OpenAIRE

    Lepage, Kyle Q.; Kramer, Mark A.; Chu, Catherine J.

    2014-01-01

    Background: The electroencephalogram (EEG) remains the primary tool for diagnosis of abnormal brain activity in clinical neurology and for in vivo recordings of human neurophysiology in neuroscience research. In EEG data acquisition, voltage is measured at positions on the scalp with respect to a reference electrode. When this reference electrode responds to electrical activity or artifact all electrodes are affected. Successful analysis of EEG data often involves re-referencing procedures th...

  15. Construction of Chinese reference female phantom

    International Nuclear Information System (INIS)

    Sheng Yinxiangzi; Liu Lixing; Xia Xiaobin

    2013-01-01

    In this study, a Voxel-based Chinese Reference female Phantom (VCRP-woman) is developed from an individual female phantom which was based on high resolution cross-sectional color photographs. An in-house C ++ program was developed to adjust the phantom. Finally, a reference female phantom with have the same height, weighte and similar organs masses with the Chinese reference adult female data. The adjusted phantom is then imported to MCNPX to calculate the organs absorbed dose and effective dose conversion coefficients. Results are compared between VCRP-woman and the ICRP adult reference female phantom. (authors)

  16. Development of a 5 MW reference gearbox for offshore wind turbines: 5 MW reference gearbox

    Energy Technology Data Exchange (ETDEWEB)

    Nejad, Amir Rasekhi [Norwegian Research Center for Offshore Wind Technology, Norwegian University of Science and Technology, Trondheim Norway; Center for Ships and Ocean Structures, Norwegian University of Science and Technology, Trondheim Norway; Guo, Yi [National Wind Technology Center, National Renewable Energy Laboratory, Golden Colorado USA; Gao, Zhen [Center for Ships and Ocean Structures, Norwegian University of Science and Technology, Trondheim Norway; Moan, Torgeir [Norwegian Research Center for Offshore Wind Technology, Norwegian University of Science and Technology, Trondheim Norway; Center for Ships and Ocean Structures, Norwegian University of Science and Technology, Trondheim Norway

    2015-07-27

    This paper presents detailed descriptions, modeling parameters and technical data of a 5MW high-speed gearbox developed for the National Renewable Energy Laboratory offshore 5MW baseline wind turbine. The main aim of this paper is to support the concept studies and research for large offshore wind turbines by providing a baseline gearbox model with detailed modeling parameters. This baseline gearbox follows the most conventional design types of those used in wind turbines. It is based on the four-point supports: two main bearings and two torque arms. The gearbox consists of three stages: two planetary and one parallel stage gears. The gear ratios among the stages are calculated in a way to obtain the minimum gearbox weight. The gearbox components are designed and selected based on the offshore wind turbine design codes and validated by comparison to the data available from large offshore wind turbine prototypes. All parameters required to establish the dynamic model of the gearbox are then provided. Moreover, a maintenance map indicating components with high to low probability of failure is shown. The 5 MW reference gearbox can be used as a baseline for research on wind turbine gearboxes and comparison studies. It can also be employed in global analysis tools to represent a more realistic model of a gearbox in a coupled analysis.

  17. Transition towards energy efficient machine tools

    Energy Technology Data Exchange (ETDEWEB)

    Zein, Andre [Technische Univ. Braunschweig (Germany). Inst. fuer Werkzeugmaschinen und Fertigungstechnik

    2012-07-01

    Provides unique data about industrial trends affecting the energy demand of machine tools. Presents a comprehensive methodology to assess the energy efficiency of machining processes. Contains an integrated management concept to implement energy performance measures into existing industrial systems. Includes an industrial case study with two exemplary applications. Energy efficiency represents a cost-effective and immediate strategy of a sustainable development. Due to substantial environmental and economic implications, a strong emphasis is put on the electrical energy requirements of machine tools for metalworking processes. The improvement of energy efficiency is however confronted with diverse barriers, which sustain an energy efficiency gap of unexploited potential. The deficiencies lie in the lack of information about the actual energy requirements of machine tools, a minimum energy reference to quantify improvement potential and the possible actions to improve the energy demand. Therefore, a comprehensive concept for energy performance management of machine tools is developed which guides the transition towards energy efficient machine tools. It is structured in four innovative concept modules, which are embedded into step-by-step workflow models. The capability of the performance management concept is demonstrated in an automotive manufacturing environment. The target audience primarily comprises researchers and practitioners challenged to enhance energy efficiency in manufacturing. The book may also be beneficial for graduate students who want to specialize in this field.

  18. Nuclear emergency response exercises and decision support systems - integrating domestic experience with international reference systems

    International Nuclear Information System (INIS)

    Slavnicu, D.S.; Vamanu, D.V.; Gheorghiu, D.; Acasandrei, V.T.; Slavnicu, E.

    2010-01-01

    The paper glosses on the experience of a research-oriented team routinely involved in emergency preparedness and response management activities, with the assimilation, implementation, and application of decision support systems (DSS) of continental reference in Europe, and the development of supportive, domestic radiological assessment tools. Two exemplary nuclear alert exercises are discussed, along with solutions that emerged during drill planning and execution, to make decision support tools of various origins and strength to work synergistically and complement each other. (authors)

  19. New Conceptual Design Tools

    DEFF Research Database (Denmark)

    Pugnale, Alberto; Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    hand, the main software houses are trying to introduce powerful and effective user-friendly applications in the world of building designers, that are more and more able to fit their specific requirements; on the other hand, some groups of expert users with a basic programming knowledge seem to deal......This paper aims to discuss recent approaches in using more and more frequently computer tools as supports for the conceptual design phase of the architectural project. The present state-of-the-art about software as conceptual design tool could be summarized in two parallel tendencies. On the one...... with the problem of software as conceptual design tool by means of 'scripting', in other words by self-developing codes able to solve specific and well defined design problems. Starting with a brief historical recall and the discussion of relevant researches and practical experiences, this paper investigates...

  20. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  1. Reference-based pricing: an evidence-based solution for lab services shopping.

    Science.gov (United States)

    Melton, L Doug; Bradley, Kent; Fu, Patricia Lin; Armata, Raegan; Parr, James B

    2014-01-01

    To determine the effect of reference-based pricing (RBP) on the percentage of lab services utilized by members that were at or below the reference price. Retrospective, quasi-experimental, matched, case-control pilot evaluation of an RBP benefit for lab services. The study group included employees of a multinational grocery chain covered by a national health insurance carrier and subject to RBP for lab services; it had access to an online lab shopping tool and was informed about the RBP benefit through employer communications. The reference group was covered by the same insurance carrier but not subject to RBP. The primary end point was lab compliance, defined as the percentage of lab claims with total charges at or below the reference price. Difference-in-difference regression estimation evaluated changes in lab compliance between the 2 groups. Higher compliance per lab claim was evident for the study group compared with the reference group (69% vs 57%; Ponline shopping tool was used by 7% of the matched-adjusted study group prior to obtaining lab services. Lab compliance was 76% for study group members using the online tool compared with 68% among nonusers who were subject to RBP (P<.01). RBP can promote cost-conscious selection of lab services. Access to facilities that offer services below the reference price and education about RBP improve compliance. Evaluation of the effect of RBP on higher-cost medical services, including radiology, outpatient specialty, and elective inpatient procedures, is needed.

  2. RSP Tooling Technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-11-20

    RSP Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica (Figure 1). This is followed by spray forming a thick deposit of a tooling alloy on the pattern to capture the desired shape, surface texture, and detail. The resultant metal block is cooled to room temperature and separated from the pattern. The deposit's exterior walls are machined square, allowing it to be used as an insert in a standard mold base. The overall turnaround time for tooling is about 3 to 5 days, starting with a master. Molds and dies produced in this way have been used in high volume production runs in plastic injection molding and die casting. A Cooperative Research and Development Agreement (CRADA) between the Idaho National Engineering and Environmental Laboratory (INEEL) and Grupo Vitro has been established to evaluate the feasibility of using RSP Tooling technology for producing molds and dies of interest to Vitro. This report summarizes results from Phase I of this agreement, and describes work scope and budget for Phase I1 activities. The main objective in Phase I was to demonstrate the feasibility of applying the Rapid Solidification Process (RSP) Tooling method to produce molds for the manufacture of glass and other components of interest to Vitro. This objective was successfully achieved.

  3. CMS tracker visualization tools

    CERN Document Server

    Zito, G; Osborne, I; Regano, A

    2005-01-01

    This document will review the design considerations, implementations and performance of the CMS Tracker Visualization tools. In view of the great complexity of this sub-detector (more than 50 millions channels organized in 16540 modules each one of these being a complete detector), the standard CMS visualization tools (IGUANA and IGUANACMS) that provide basic 3D capabilities and integration within CMS framework, respectively, have been complemented with additional 2D graphics objects. Based on the experience acquired using this software to debug and understand both hardware and software during the construction phase, we propose possible future improvements to cope with online monitoring and event analysis during data taking.

  4. CMS tracker visualization tools

    Energy Technology Data Exchange (ETDEWEB)

    Mennea, M.S. [Dipartimento Interateneo di Fisica ' Michelangelo Merlin' e INFN sezione di Bari, Via Amendola 173 - 70126 Bari (Italy); Osborne, I. [Northeastern University, 360 Huntington Avenue, Boston, MA 02115 (United States); Regano, A. [Dipartimento Interateneo di Fisica ' Michelangelo Merlin' e INFN sezione di Bari, Via Amendola 173 - 70126 Bari (Italy); Zito, G. [Dipartimento Interateneo di Fisica ' Michelangelo Merlin' e INFN sezione di Bari, Via Amendola 173 - 70126 Bari (Italy)]. E-mail: giuseppe.zito@ba.infn.it

    2005-08-21

    This document will review the design considerations, implementations and performance of the CMS Tracker Visualization tools. In view of the great complexity of this sub-detector (more than 50 millions channels organized in 16540 modules each one of these being a complete detector), the standard CMS visualization tools (IGUANA and IGUANACMS) that provide basic 3D capabilities and integration within CMS framework, respectively, have been complemented with additional 2D graphics objects. Based on the experience acquired using this software to debug and understand both hardware and software during the construction phase, we propose possible future improvements to cope with online monitoring and event analysis during data taking.

  5. The GNEMRE Dendro Tool.

    Energy Technology Data Exchange (ETDEWEB)

    Merchant, Bion John

    2007-10-01

    The GNEMRE Dendro Tool provides a previously unrealized analysis capability in the field of nuclear explosion monitoring. Dendro Tool allows analysts to quickly and easily determine the similarity between seismic events using the waveform time-series for each of the events to compute cross-correlation values. Events can then be categorized into clusters of similar events. This analysis technique can be used to characterize historical archives of seismic events in order to determine many of the unique sources that are present. In addition, the source of any new events can be quickly identified simply by comparing the new event to the historical set.

  6. Authoring Issues beyond Tools

    Science.gov (United States)

    Spierling, Ulrike; Szilas, Nicolas

    Authoring is still considered a bottleneck in successful Interactive Storytelling and Drama. The claim for intuitive authoring tools is high, especially for tools that allow storytellers and artists to define dynamic content that can be run with an AI-based story engine. We explored two concrete authoring processes in depth, using various Interactive Storytelling prototypes, and have provided feedback from the practical steps. The result is a presentation of general issues in authoring Interactive Storytelling, rather than of particular problems with a specific system that could be overcome by 'simply' designing the right interface. Priorities for future developments are also outlined.

  7. CMS tracker visualization tools

    International Nuclear Information System (INIS)

    Mennea, M.S.; Osborne, I.; Regano, A.; Zito, G.

    2005-01-01

    This document will review the design considerations, implementations and performance of the CMS Tracker Visualization tools. In view of the great complexity of this sub-detector (more than 50 millions channels organized in 16540 modules each one of these being a complete detector), the standard CMS visualization tools (IGUANA and IGUANACMS) that provide basic 3D capabilities and integration within CMS framework, respectively, have been complemented with additional 2D graphics objects. Based on the experience acquired using this software to debug and understand both hardware and software during the construction phase, we propose possible future improvements to cope with online monitoring and event analysis during data taking

  8. Coach assessment tool

    OpenAIRE

    Härkönen, Niko; Klicznik, Roman

    2014-01-01

    The Coach Assessment Tool was created to assist coaches of all sports for their own development. The starting point to develop the tool is the fact that coaching clinics solely focus on the technical and tactial skills of the sport. The education for coaches is lacking to teach the importance of the coach´s behavior towards their athletes. The question is how to teach properly the task in hand to increase the athlete´s performance considering the coach´s behavior. Nevertheless,...

  9. Synchronous method and engineering tool for the strategic factory planning

    OpenAIRE

    Abdul Rahman, O.; Jaeger, J.; Constantinescu, C.

    2011-01-01

    This paper presents the approach to combine two reference methods and engineering tools, for "Factory Performance and Investment Planning«as well as "Value Added Ideal Production Network Planning". The resulted synchronous method aims to support factories in the strategic planning as well as in the network planning. The corresponding engineering tool is employed for assessment planning, sales planning, capacity planning and production costs planning under the consideration of dynamic and stoc...

  10. S. R. Ranganathan's Theory of Reference Service.

    Science.gov (United States)

    Varghese, Manoj M.

    A study of S. R. Ranganathan's theory of reference service is undertaken by using an historical methodology. It was evident from the literature review that Ranganathan had established that reference service was the most important work and served as the hub of all library practices. There were six factors that were repeatedly considered by…

  11. Accuracy of References in Five Entomology Journals.

    Science.gov (United States)

    Kristof, Cynthia

    ln this paper, the bibliographical references in five core entomology journals are examined for citation accuracy in order to determine if the error rates are similar. Every reference printed in each journal's first issue of 1992 was examined, and these were compared to the original (cited) publications, if possible, in order to determine the…

  12. Technology: Trigger for Change in Reference Librarianship.

    Science.gov (United States)

    Hallman, Clark N.

    1990-01-01

    Discussion of the influence of technological developments on social change focuses on the effects of information technology on academic reference librarianship. Highlights include reference skills; electronic resources; microcomputer technology; online catalogs; interaction and communication with users; the need to teach information skills; and…

  13. ‘Sampling the reference set’ revisited

    NARCIS (Netherlands)

    Berkum, van E.E.M.; Linssen, H.N.; Overdijk, D.A.

    1998-01-01

    The confidence level of an inference table is defined as a weighted truth probability of the inference when sampling the reference set. The reference set is recognized by conditioning on the values of maximal partially ancillary statistics. In the sampling experiment values of incidental parameters

  14. Writing references and using citation management software.

    Science.gov (United States)

    Sungur, Mukadder Orhan; Seyhan, Tülay Özkan

    2013-09-01

    The correct citation of references is obligatory to gain scientific credibility, to honor the original ideas of previous authors and to avoid plagiarism. Currently, researchers can easily find, cite and store references using citation management software. In this review, two popular citation management software programs (EndNote and Mendeley) are summarized.

  15. On Learning to Write Those **** References

    Science.gov (United States)

    Hartley, James

    2014-01-01

    In this article, the author discusses how difficult it is for psychology college students to learn to write multiple disciplines of references. It is hard for students to understand why all details have to be written in the right order and the right type-style--depending upon which reference system is used. In this article, the author proposes…

  16. THE CONCEPT OF REFERENCE CONDITION, REVISITED ...

    Science.gov (United States)

    Ecological assessments of aquatic ecosystems depend on the ability to compare current conditions against some expectation of how they could be in the absence of significant human disturbance. The concept of a ‘‘reference condition’’ is often used to describe the standard or benchmark against which current condition is compared. If assessments are to be conducted consistently, then a common understanding of the definitions and complications of reference condition is necessary. A 2006 paper (Stoddard et al., 2006, Ecological Applications 16:1267-1276) made an early attempt at codifying the reference condition concept; in this presentation we will revisit the points raised in that paper (and others) and examine how our thinking has changed in a little over 10 years.Among the issues to be discussed: (1) the “moving target” created when reference site data are used to set thresholds in large scale assessments; (2) natural vs. human disturbance and their effects on reference site distributions; (3) circularity and the use of biological data to assist in reference site identification; (4) using site-scale (in-stream or in-lake) measurements vs. landscape-level human activity to identify reference conditions. Ecological assessments of aquatic ecosystems depend on the ability to compare current conditions against some expectation of how they could be in the absence of significant human disturbance. The concept of a ‘‘reference condition’’ is often use

  17. FINANCIAL WORKBOOK Quick Reference -Budget Preparation 1 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alexandra Eustache

    FINANCIAL WORKBOOK. Quick Reference -Budget Preparation. 6. Enter detailed budget notes for each line item. Use the “add new row “ button if more rows are needed. (Refer to page 7 on user guider for more information on budget notes). 7. On the “indirect cost” sheet, enter a fixed percentage or amount(s) a. For fixed ...

  18. Lazy reference counting for the Microgrid

    NARCIS (Netherlands)

    Poss, R.; Grelck, C.; Herhut, S.; Scholz, S.-B.

    2012-01-01

    This papers revisits non-deferred reference counting, a common technique to ensure that potentially shared large heap objects can be reused safely when they are both input and output to computations. Traditionally, thread-safe reference counting exploit implicit memory-based communication of counter

  19. Patron Preference in Reference Service Points.

    Science.gov (United States)

    Morgan, Linda

    1980-01-01

    Behavior of patrons choosing between a person sitting at a counter and one sitting at a desk at each of two reference points was observed at the reference department during remodeling at the M. D. Anderson Library of the University of Houston. Results showed a statistically relevant preference for the counter. (Author/JD)

  20. Referent Salience Affects Second Language Article Use

    Science.gov (United States)

    Trenkic, Danijela; Pongpairoj, Nattama

    2013-01-01

    The effect of referent salience on second language (L2) article production in real time was explored. Thai (-articles) and French (+articles) learners of English described dynamic events involving two referents, one visually cued to be more salient at the point of utterance formulation. Definiteness marking was made communicatively redundant with…

  1. Network interconnections: an architectural reference model

    NARCIS (Netherlands)

    Butscher, B.; Lenzini, L.; Morling, R.; Vissers, C.A.; Popescu-Zeletin, R.; van Sinderen, Marten J.; Heger, D.; Krueger, G.; Spaniol, O.; Zorn, W.

    1985-01-01

    One of the major problems in understanding the different approaches in interconnecting networks of different technologies is the lack of reference to a general model. The paper develops the rationales for a reference model of network interconnection and focuses on the architectural implications for

  2. Uncertainty in Reference and Information Service

    Science.gov (United States)

    VanScoy, Amy

    2015-01-01

    Introduction: Uncertainty is understood as an important component of the information seeking process, but it has not been explored as a component of reference and information service. Method: Interpretative phenomenological analysis was used to examine the practitioner perspective of reference and information service for eight academic research…

  3. Automation and Job Satisfaction among Reference Librarians.

    Science.gov (United States)

    Whitlatch, Jo Bell

    1991-01-01

    Discussion of job satisfaction and the level of job performance focuses on the effect of automation on job satisfaction among reference librarians. The influence of stress is discussed, a job strain model is explained, and examples of how to design a job to reduce the stress caused by automation are given. (12 references) (LRW)

  4. Predictor-Based Model Reference Adaptive Control

    Science.gov (United States)

    Lavretsky, Eugene; Gadient, Ross; Gregory, Irene M.

    2010-01-01

    This paper is devoted to the design and analysis of a predictor-based model reference adaptive control. Stable adaptive laws are derived using Lyapunov framework. The proposed architecture is compared with the now classical model reference adaptive control. A simulation example is presented in which numerical evidence indicates that the proposed controller yields improved transient characteristics.

  5. Comparing Theories of Reference-Dependent Choice

    Science.gov (United States)

    Bhatia, Sudeep

    2017-01-01

    Preferences are influenced by the presence or absence of salient choice options, known as reference points. This behavioral tendency is traditionally attributed to the loss aversion and diminishing sensitivity assumptions of prospect theory. In contrast, some psychological research suggests that reference dependence is caused by attentional biases…

  6. Cancer Data and Statistics Tools

    Science.gov (United States)

    ... Educational Campaigns Initiatives Stay Informed Cancer Data and Statistics Tools Recommend on Facebook Tweet Share Compartir Cancer Statistics Tools United States Cancer Statistics: Data Visualizations The ...

  7. Social Question and Answer Services versus Library Virtual Reference: Evaluation and Comparison from the Users' Perspective

    Science.gov (United States)

    Zhang, Yin; Deng, Shengli

    2014-01-01

    Introduction: In recent years, the introduction of social question and answer services and other Internet tools have expanded the ways in which people have their questions answered. There has been speculation and debate over whether such services and other Internet tools are replacing library virtual reference services. Method: Most previous…

  8. Sourcebook for energy assessment. [Reference Energy Systems for 1972-2020

    Energy Technology Data Exchange (ETDEWEB)

    Beller, M. (ed.)

    1975-12-01

    An analytical approach is presented that is broadly applicable to the assessment of energy technologies and policies. Using the Reference Energy System approach, it permits the examination of the economic, environmental, and resource implications resulting from the substitution of one fuel or technology for another. Included as tools for such analyses are the necessary data and methodology, as well as a set of Reference Energy Systems covering the 1972-2020 period to serve as baselines for the perturbation analyses of interest. 46 tables, 25 figures, 71 references.

  9. Adaptive Control with Reference Model Modification

    Science.gov (United States)

    Stepanyan, Vahram; Krishnakumar, Kalmanje

    2012-01-01

    This paper presents a modification of the conventional model reference adaptive control (MRAC) architecture in order to improve transient performance of the input and output signals of uncertain systems. A simple modification of the reference model is proposed by feeding back the tracking error signal. It is shown that the proposed approach guarantees tracking of the given reference command and the reference control signal (one that would be designed if the system were known) not only asymptotically but also in transient. Moreover, it prevents generation of high frequency oscillations, which are unavoidable in conventional MRAC systems for large adaptation rates. The provided design guideline makes it possible to track a reference commands of any magnitude from any initial position without re-tuning. The benefits of the method are demonstrated with a simulation example

  10. Standard digital reference images for titanium castings

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 The digital reference images provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in titanium castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct digital reference images, which illustrate the discontinuity types and severity levels. They are intended to provide the following: 1.1.1 A guide enabling recognition of titanium casting discontinuities and their differentiation both as to type and degree through digital radiographic examination. 1.1.2 Example digital radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications and drawings. 1.2 The digital reference images consist of seventeen digital files each illustrating eight grades of increasing severity. The files illustrate seven common discontinuity types representing casting sections up to 1-in. (25.4-mm). 1.3 The reference radiographs were developed for casting sections up to 1...

  11. Incident Information Management Tool

    CERN Document Server

    Pejovic, Vladimir

    2015-01-01

    Flaws of\tcurrent incident information management at CMS and CERN\tare discussed. A new data\tmodel for future incident database is\tproposed and briefly described. Recently developed draft version of GIS-­‐based tool for incident tracking is presented.

  12. Hypercard Another Computer Tool.

    Science.gov (United States)

    Geske, Joel

    1991-01-01

    Describes "Hypercard," a computer application package usable in all three modes of instructional computing: tutor, tool, and tutee. Suggests using Hypercard in scholastic journalism programs to teach such topics as news, headlines, design, photography, and advertising. Argues that the ability to access, organize, manipulate, and comprehend…

  13. Organisational skills and tools.

    Science.gov (United States)

    Wicker, Paul

    2009-04-01

    While this article mainly applies to practitioners who have responsibilities for leading teams or supervising practitioners, many of the skills and tools described here may also apply to students or junior practitioners. The purpose of this article is to highlight some of the main points about organisation, some of the organisational skills and tools that are available, and some examples of how these skills and tools can be used to make practitioners more effective at organising their workload. It is important to realise that organising work and doing work are two completely different things and shouldn't be mixed up. For example, it would be very difficult to start organising work in the middle of a busy operating list: the organisation of the work must come before the work starts and therefore preparation is often an important first step in organising work. As such, some of the tools and skills described in this article may need to be used hours or even days prior to the actual work taking place.

  14. Tools for Authentication

    International Nuclear Information System (INIS)

    White, G.

    2008-01-01

    Many recent Non-proliferation and Arms Control software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool must be based on a complete language compiler infrastructure, that is, one that can parse and digest the full language through its standard grammar. ROSE is precisely such a compiler infrastructure developed within DOE. ROSE is a robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. This year, it has been extended to support the automated analysis of binaries. We continue to extend ROSE to address a number of security-specific requirements and apply it to software authentication for Non-proliferation and Arms Control projects. We will give an update on the status of our work

  15. Methodologies, languages and tools

    International Nuclear Information System (INIS)

    Amako, Katsuya

    1994-01-01

    This is a summary of the open-quotes Methodologies, Languages and Toolsclose quotes session in the CHEP'94 conference. All the contributions to methodologies and languages are relevant to the object-oriented approach. Other topics presented are related to various software tools in the down-sized computing environment

  16. Tools for Authentication

    Energy Technology Data Exchange (ETDEWEB)

    White, G

    2008-07-09

    Many recent Non-proliferation and Arms Control software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool must be based on a complete language compiler infrastructure, that is, one that can parse and digest the full language through its standard grammar. ROSE is precisely such a compiler infrastructure developed within DOE. ROSE is a robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. This year, it has been extended to support the automated analysis of binaries. We continue to extend ROSE to address a number of security-specific requirements and apply it to software authentication for Non-proliferation and Arms Control projects. We will give an update on the status of our work.

  17. [Tools for assisting diagnosis].

    Science.gov (United States)

    Roux, Magali; Asset, Sonya; Medjebar, Samir

    2017-11-01

    Connected objects are revolutionising practices, fulfil patients' needs for autonomy and the need to deploy healthcare provision beyond healthcare facilities. This article illustrates how these tools can be used in the case of epilepsy. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  18. Requirements for enrichment tools

    NARCIS (Netherlands)

    Boer, A.; Winkels, R.; Trompper, M.

    2016-01-01

    This report gives a high level overview of requirements for Enrichment tools in the Openlaws.eu project. Openlaws.eu aims to initiate a platform and develop a vision for Big Open Legal Data (BOLD): an open framework for legislation, case law, and legal literature from across Europe.

  19. C-TOOL

    DEFF Research Database (Denmark)

    Taghizadeh-Toosi, Arezoo; Christensen, Bent Tolstrup; Hutchings, Nicholas John

    2014-01-01

    Soil organic carbon (SOC) is a significant component of the global carbon (C) cycle. Changes in SOC storage affect atmospheric CO2 concentrations on decadal to centennial timescales. The C-TOOL model was developed to simulate farm- and regional-scale effects of management on medium- to long...

  20. Tools for Climate Services

    Science.gov (United States)

    Hartmann, H. C.

    2007-05-01

    Full realization of socio-economic benefits of from public investments in climate services remains incomplete because decision makers have difficulty: 1) interpreting individual products, 2) appropriately judging information credibility, and 3) linking different types of information, both conceptually and practically. Addressing these barriers is as important as improving the science leading to improved information. The challenge is creating flexible climate information products and tools that can accommodate unique user needs; the goal is a systemic change in the nature of information delivery and use. The underlying assumption is not that climate information is good and useful, and simply needs to be communicated effectively. Rather, a number of conditions must be met before decision makers can make informed choices about whether to use particular information in a specific situation. Several case studies, of varying success, illustrate user-centric strategies for developing decision support tools: a forecast evaluation tool, a climate information management system, and a hydrologic alert system. However, tools alone will not bridge the barriers in climate services, with training and other capacity- building activities remaining important activities.

  1. Sight Application Analysis Tool

    Energy Technology Data Exchange (ETDEWEB)

    Bronevetsky, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-17

    The scale and complexity of scientific applications makes it very difficult to optimize, debug and extend them to support new capabilities. We have developed a tool that supports developers’ efforts to understand the logical flow of their applications and interactions between application components and hardware in a way that scales with application complexity and parallelism.

  2. Tool voor verdeling rivierwater

    NARCIS (Netherlands)

    Hellegers, P.J.G.J.

    2011-01-01

    In het stroomgebied van de Inkomati-rivier in zuidelijk Afrika, maken partijen uit drie landen aanspraak op het rivierwater. LEI, Alterra en adviesbureau WaterWatch ontwikkelden met lokale partners een tool die betrokkenen laat zien wat ander landgebruik betekent voor de beschikbaarheid van dat

  3. The science writing tool

    Science.gov (United States)

    Schuhart, Arthur L.

    This is a two-part dissertation. The primary part is the text of a science-based composition rhetoric and reader called The Science Writing Tool. This textbook has seven chapters dealing with topics in Science Rhetoric. Each chapter includes a variety of examples of science writing, discussion questions, writing assignments, and instructional resources. The purpose of this text is to introduce lower-division college science majors to the role that rhetoric and communication plays in the conduct of Science, and how these skills contribute to a successful career in Science. The text is designed as a "tool kit," for use by an instructor constructing a science-based composition course or a writing-intensive Science course. The second part of this part of this dissertation reports on student reactions to draft portions of The Science Writing Tool text. In this report, students of English Composition II at Northern Virginia Community College-Annandale were surveyed about their attitudes toward course materials and topics included. The findings were used to revise and expand The Science Writing Tool.

  4. Big Data Visualization Tools

    OpenAIRE

    Bikakis, Nikos

    2018-01-01

    Data visualization is the presentation of data in a pictorial or graphical format, and a data visualization tool is the software that generates this presentation. Data visualization provides users with intuitive means to interactively explore and analyze data, enabling them to effectively identify interesting patterns, infer correlations and causalities, and supports sense-making activities.

  5. Rapid Tooling via Stereolithography

    OpenAIRE

    Montgomery, Eva

    2006-01-01

    Approximately three years ago, composite stereolithography (SL) resins were introduced to the marketplace, offering performance features beyond what traditional SL resins could offer. In particular, the high heat deflection temperatures and high stiffness of these highly filled resins have opened the door to several new rapid prototyping (RP) applications, including wind tunnel test modelling and, more recently, rapid tooling.

  6. Tools of the Trade

    Science.gov (United States)

    Porterfield, Kitty; Carnes, Meg

    2010-01-01

    People have known principals who are intellectual giants on issues of instruction and who have a great love of children but who stumble in leadership roles because they either do not or cannot communicate what they know. Good communication skills are among the most important tools a leader carries in his or her toolbox. Not only does good…

  7. Environmental Remediation Data Management Tools

    International Nuclear Information System (INIS)

    Wierowski, J. V.; Henry, L. G.; Dooley, D. A.

    2002-01-01

    Computer software tools for data management can improve site characterization, planning and execution of remediation projects. This paper discusses the use of two such products that have primarily been used within the nuclear power industry to enhance the capabilities of radiation protection department operations. Advances in digital imaging, web application development and programming technologies have made development of these tools possible. The Interactive Visual Tour System (IVTS) allows the user to easily create and maintain a comprehensive catalog containing digital pictures of the remediation site. Pictures can be cataloged in groups (termed ''tours'') that can be organized either chronologically or spatially. Spatial organization enables the user to ''walk around'' the site and view desired areas or components instantly. Each photo is linked to a map (floor plan, topographical map, elevation drawing, etc.) with graphics displaying the location on the map and any available tour/component links. Chronological organization enables the user to view the physical results of the remediation efforts over time. Local and remote management teams can view these pictures at any time and from any location. The Visual Survey Data System (VSDS) allows users to record survey and sample data directly on photos and/or maps of areas and/or components. As survey information is collected for each area, survey data trends can be reviewed for any repetitively measured location or component. All data is stored in a Quality Assurance (Q/A) records database with reference to its physical sampling point on the site as well as other information to support the final closeout report for the site. The ease of use of these web-based products has allowed nuclear power plant clients to plan outage work from their desktop and realize significant savings with respect to dose and cost. These same tools are invaluable for remediation and decommissioning planning of any scale and for recording

  8. Extended Testability Analysis Tool

    Science.gov (United States)

    Melcher, Kevin; Maul, William A.; Fulton, Christopher

    2012-01-01

    The Extended Testability Analysis (ETA) Tool is a software application that supports fault management (FM) by performing testability analyses on the fault propagation model of a given system. Fault management includes the prevention of faults through robust design margins and quality assurance methods, or the mitigation of system failures. Fault management requires an understanding of the system design and operation, potential failure mechanisms within the system, and the propagation of those potential failures through the system. The purpose of the ETA Tool software is to process the testability analysis results from a commercial software program called TEAMS Designer in order to provide a detailed set of diagnostic assessment reports. The ETA Tool is a command-line process with several user-selectable report output options. The ETA Tool also extends the COTS testability analysis and enables variation studies with sensor sensitivity impacts on system diagnostics and component isolation using a single testability output. The ETA Tool can also provide extended analyses from a single set of testability output files. The following analysis reports are available to the user: (1) the Detectability Report provides a breakdown of how each tested failure mode was detected, (2) the Test Utilization Report identifies all the failure modes that each test detects, (3) the Failure Mode Isolation Report demonstrates the system s ability to discriminate between failure modes, (4) the Component Isolation Report demonstrates the system s ability to discriminate between failure modes relative to the components containing the failure modes, (5) the Sensor Sensor Sensitivity Analysis Report shows the diagnostic impact due to loss of sensor information, and (6) the Effect Mapping Report identifies failure modes that result in specified system-level effects.

  9. Spray-formed tooling

    Science.gov (United States)

    McHugh, K. M.; Key, J. F.

    The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be designed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

  10. Orthorad - the online reference database of skeletal plain film radiography

    International Nuclear Information System (INIS)

    Hinkmann, F.M.; Heberlein, C.; Greess, H.; Ketelsen, D.; Klose, K.J.; Grunewald, M.

    2006-01-01

    Purpose: it is evident that there is a growing need for internet-based reference databases for reasons of practicability and due to the increasing use of reporting on digital workstations. The main advantages of online databases are expected with respect to plain film radiography and cross-sectional imaging. A reference database of skeletal plain film radiography was to be created using the Orthorad program. Materials and methods: the most important standard settings and special images of young and healthy adults in plain film radiography were collected over one year. All samples were approved for the Orthorad database by a board qualified radiologist. Based on the workflows of radiographers and radiologists, the records were organized by body part (http://www.idr.med.uni-erlangen.de/orthorad/orthorad.htm). This logical data structure will ensure that the tool serves as a source of information in two ways: On the one hand, the radiographer can access information on positioning, tube voltage and cassette format. On the other hand, the radiologist receives important knowledge regarding X-ray anatomy, reference data regarding the human skeleton, and information about the correct reporting for an image. (orig.)

  11. Using RNA-Seq Data to Evaluate Reference Genes Suitable for Gene Expression Studies in Soybean.

    Directory of Open Access Journals (Sweden)

    Aldrin Kay-Yuen Yim

    Full Text Available Differential gene expression profiles often provide important clues for gene functions. While reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR is an important tool, the validity of the results depends heavily on the choice of proper reference genes. In this study, we employed new and published RNA-sequencing (RNA-Seq datasets (26 sequencing libraries in total to evaluate reference genes reported in previous soybean studies. In silico PCR showed that 13 out of 37 previously reported primer sets have multiple targets, and 4 of them have amplicons with different sizes. Using a probabilistic approach, we identified new and improved candidate reference genes. We further performed 2 validation tests (with 26 RNA samples on 8 commonly used reference genes and 7 newly identified candidates, using RT-qPCR. In general, the new candidate reference genes exhibited more stable expression levels under the tested experimental conditions. The three newly identified candidate reference genes Bic-C2, F-box protein2, and VPS-like gave the best overall performance, together with the commonly used ELF1b. It is expected that the proposed probabilistic model could serve as an important tool to identify stable reference genes when more soybean RNA-Seq data from different growth stages and treatments are used.

  12. Improvements in the Protein Identifier Cross-Reference service.

    Science.gov (United States)

    Wein, Samuel P; Côté, Richard G; Dumousseau, Marine; Reisinger, Florian; Hermjakob, Henning; Vizcaíno, Juan A

    2012-07-01

    The Protein Identifier Cross-Reference (PICR) service is a tool that allows users to map protein identifiers, protein sequences and gene identifiers across over 100 different source databases. PICR takes input through an interactive website as well as Representational State Transfer (REST) and Simple Object Access Protocol (SOAP) services. It returns the results as HTML pages, XLS and CSV files. It has been in production since 2007 and has been recently enhanced to add new functionality and increase the number of databases it covers. Protein subsequences can be Basic Local Alignment Search Tool (BLAST) against the UniProt Knowledgebase (UniProtKB) to provide an entry point to the standard PICR mapping algorithm. In addition, gene identifiers from UniProtKB and Ensembl can now be submitted as input or mapped to as output from PICR. We have also implemented a 'best-guess' mapping algorithm for UniProt. In this article, we describe the usefulness of PICR, how these changes have been implemented, and the corresponding additions to the web services. Finally, we explain that the number of source databases covered by PICR has increased from the initial 73 to the current 102. New resources include several new species-specific Ensembl databases as well as the Ensembl Genome ones. PICR can be accessed at http://www.ebi.ac.uk/Tools/picr/.

  13. INTELLECTUAL PROPERTY RIGHTS ISSUES FOR RESEARCH TOOLS IN BIOTECHNOLOGY RESEARCH

    Directory of Open Access Journals (Sweden)

    Rekha Chaturvedi

    2015-09-01

    Full Text Available The research tools refer to the resources researchers need to use in experimental work. In Biotechnology, these can include cell lines, monoclonal antibodies, reagents, animal models, growth factors, combinatorial chemistry libraries, drug and drug targets, clones and cloning tools (such as PCR, method, laboratory equipment and machines, database and computer software. Research tools therefore serve as basis for upstream research to improve the present product or process. There are several challenges in the way of using patented research tools. IP issues with regard to research tools are important and may sometime pose hindrance for researchers. Hence in the case of patented research tools, IPR issues can compose a major hurdle for technology development. In majority instances research tools are permitted through MTAs for academic research and for imparting education. TRIPS provides a provision for exception to patent rights for experimental use of patented technology in scientific research and several countries including India have included this provision in their patent legislation. For commercially important work, licensing of research tools can be based on royalty or one time lump sum payment. Some patent owners of important high-end research tools for development of platform technology create problems in licensing which can impede research. Usually cost of a commercially available research tool is built up in its price.

  14. What Determines the Response: Test or Reference?

    Science.gov (United States)

    Chukova, S. V.; Ahumada, A. J., Jr.; Null, Cynthia (Technical Monitor)

    1998-01-01

    The stability of sensory memory has been studied by presenting a reference stimulus, a delay, and a test stimulus. As has been pointed out by Lages and Treisman (1998 Vision Research 38 557-572), the usual measure of performance depends only on the effect of test variations on the responses. The Weber fraction characterizing performance is more properly called the test stimulus Weber fraction. We measure the relative contribution of the test and reference to the response by the ratio of the test Weber fraction to the reference Weber fraction. The stimuli were two dark lines on a bright background. Seven reference separations, varying from 9.5 to 16.7 arc min, were intermixed in each run. Interstimulus intervals (ISI) of 50, 200 and 2000 msec and intertrial intervals (ITI) of 500 and 2500 msec were investigated. When the ISI was short (50 or 200 msec), for both ITIs, responses were determined equally by the test and reference. For the long ISI (2000 msec), the reference stimulus contributed less. However, only for the 500 msec ITI (and not for all observers) was the contribution of the reference stimulus negligible, as Treisman's criterion setting theory might suggest.

  15. Fast tracking ICT infrastructure requirements and design, based on Enterprise Reference Architecture and matching Reference Models

    DEFF Research Database (Denmark)

    Bernus, Peter; Baltrusch, Rob; Vesterager, Johan

    2002-01-01

    The Globemen Consortium has developed the virtual enterprise reference architecture and methodology (VERAM), based on GERAM and developed reference models for virtual enterprise management and joint mission delivery. The planned virtual enterprise capability includes the areas of sales...

  16. Web Tools: The Second Generation

    Science.gov (United States)

    Pascopella, Angela

    2008-01-01

    Web 2.0 tools and technologies, or second generation tools, help districts to save time and money, and eliminate the need to transfer or move files back and forth across computers. Many Web 2.0 tools help students think critically and solve problems, which falls under the 21st-century skills. The second-generation tools are growing in popularity…

  17. Python pocket reference, version 2.4

    CERN Document Server

    Lutz, Mark

    2005-01-01

    Python is optimized for quality, productivity, portability, and integration. Hundreds of thousands of Python developers around the world rely on Python for general-purpose tasks, Internet scripting, systems programming, user interfaces, and product customization. Available on all major computing platforms, including commercial versions of Unix, Linux, Windows, and Mac OS X, Python is portable, powerful and remarkable easy to use. With its convenient, quick-reference format, Python Pocket Reference, 3rd Edition is the perfect on-the-job reference. More importantly, it's now been refreshed

  18. Microsoft Windows 7 Administration Instant Reference

    CERN Document Server

    Panek, William

    2010-01-01

    An on-the-spot reference for Windows 7 administrators. Hundreds of thousands of IT administrators, network administrators, and IT support technicians work daily with Windows 7. This well-organized, portable reference covers every facet of Windows 7, providing no-nonsense instruction that is readily accessible when you need it. Designed for busy administrators, it features thumb tabs and chapter outlines to make answers easy to find.: Windows 7 administrative and support personnel need quick answers to situations they confront each day; this Instant Reference is designed to provide information,

  19. Applied regression analysis a research tool

    CERN Document Server

    Pantula, Sastry; Dickey, David

    1998-01-01

    Least squares estimation, when used appropriately, is a powerful research tool. A deeper understanding of the regression concepts is essential for achieving optimal benefits from a least squares analysis. This book builds on the fundamentals of statistical methods and provides appropriate concepts that will allow a scientist to use least squares as an effective research tool. Applied Regression Analysis is aimed at the scientist who wishes to gain a working knowledge of regression analysis. The basic purpose of this book is to develop an understanding of least squares and related statistical methods without becoming excessively mathematical. It is the outgrowth of more than 30 years of consulting experience with scientists and many years of teaching an applied regression course to graduate students. Applied Regression Analysis serves as an excellent text for a service course on regression for non-statisticians and as a reference for researchers. It also provides a bridge between a two-semester introduction to...

  20. Machine tool metrology an industrial handbook

    CERN Document Server

    Smith, Graham T

    2016-01-01

    Maximizing reader insights into the key scientific disciplines of Machine Tool Metrology, this text will prove useful for the industrial-practitioner and those interested in the operation of machine tools. Within this current level of industrial-content, this book incorporates significant usage of the existing published literature and valid information obtained from a wide-spectrum of manufacturers of plant, equipment and instrumentation before putting forward novel ideas and methodologies. Providing easy to understand bullet points and lucid descriptions of metrological and calibration subjects, this book aids reader understanding of the topics discussed whilst adding a voluminous-amount of footnotes utilised throughout all of the chapters, which adds some additional detail to the subject. Featuring an extensive amount of photographic-support, this book will serve as a key reference text for all those involved in the field. .