Regional Feedstock Partnership Summary Report: Enabling the Billion-Ton Vision

Energy Technology Data Exchange (ETDEWEB)

Owens, Vance N. [South Dakota State Univ., Brookings, SD (United States). North Central Sun Grant Center; Karlen, Douglas L. [Dept. of Agriculture Agricultural Research Service, Ames, IA (United States). National Lab. for Agriculture and the Environment; Lacey, Jeffrey A. [Idaho National Lab. (INL), Idaho Falls, ID (United States). Process Science and Technology Division

2016-07-12

The U.S. Department of Energy (DOE) and the Sun Grant Initiative established the Regional Feedstock Partnership (referred to as the Partnership) to address information gaps associated with enabling the vision of a sustainable, reliable, billion-ton U.S. bioenergy industry by the year 2030 (i.e., the Billion-Ton Vision). Over the past 7 years (2008–2014), the Partnership has been successful at advancing the biomass feedstock production industry in the United States, with notable accomplishments. The Billion-Ton Study identifies the technical potential to expand domestic biomass production to offset up to 30% of U.S. petroleum consumption, while continuing to meet demands for food, feed, fiber, and export. This study verifies for the biofuels and chemical industries that a real and substantial resource base could justify the significant investment needed to develop robust conversion technologies and commercial-scale facilities. DOE and the Sun Grant Initiative established the Partnership to demonstrate and validate the underlying assumptions underpinning the Billion-Ton Vision to supply a sustainable and reliable source of lignocellulosic feedstock to a large-scale bioenergy industry. This report discusses the accomplishments of the Partnership, with references to accompanying scientific publications. These accomplishments include advances in sustainable feedstock production, feedstock yield, yield stability and stand persistence, energy crop commercialization readiness, information transfer, assessment of the economic impacts of achieving the Billion-Ton Vision, and the impact of feedstock species and environment conditions on feedstock quality characteristics.

Probable maximum flood on the Ha Ha River

International Nuclear Information System (INIS)

Damov, D.; Masse, B.

1997-01-01

Results of a probable maximum flood (PMF) study conducted for various locations along the Ha Ha river, a tributary of the Saguenay River, were discussed. The study was undertaken for use in the design and construction of new hydraulic structures for water supply for a pulp and paper facility, following the Saguenay Flood in July 1996. Many different flood scenarios were considered, including combinations of snow-melt with rainfall. Using computer simulations, it was shown that the largest flood flows were generated by summer-fall PMF. 5 refs., 12 figs

Criticality safety review of 2 1/2-, 10-, and 14-ton UF6 cylinders

International Nuclear Information System (INIS)

Broadhead, B.L.

1991-10-01

Currently, UF 6 cylinders designed to contain 2 1/2 tons of UF 6 are classified as Fissile Class 2 packages with a transport index (TI) of 5 for the purpose of transportation. The 10-ton UF 6 cylinders are classified as Fissile Class 1 with no TI assigned for transportation. The 14-ton cylinders, although not certified for transport with enrichments greater than 1 wt % because they have no approved overpack, can be used in on-site operations for enrichments greater than 1 wt %. The maximum 235 U enrichments for these cylinders are 5.0 wt % for the 2 1/2-ton cylinder and 4.5 wt % for the 10- and 14-ton cylinders. This work reviews the suitability for reclassification of the 2 1/2-ton UF 6 packages as Fissile Class 1 with a maximum 235 U enrichment of 5 wt %. Additionally, the 10- and 14-ton cylinders are reviewed to address a change in maximum 235 U enrichment from 4.5 to 5 wt %. Based on this evaluation, the 2 1/2-ton UF 6 cylinders meet the 10 CFR.71 criteria for Fissile Class 1 packages, and no TI is needed for criticality safety purposes; however, a TI may be required based on radiation from the packages. Similarly, the 10- and 14-ton UF 6 packages appear acceptable for a maximum enrichment rating change to 5 wt % 235 U. 11 refs., 13 figs., 7 tabs

305 Building 2 ton bridge crane and monorail assembly analysis

International Nuclear Information System (INIS)

Axup, M.D.

1995-12-01

The analyses in the appendix of this document evaluate the integrity of the existing bridge crane structure, as depicted on drawing H-3-34292, for a bridge crane and monorail assembly with a load rating of 2 tons. This bridge crane and monorail assembly is a modification of a 1 1/2 ton rated manipulator bridge crane which originally existed in the 305 building

EVALUACIÓN AGRONÓMICA DE 25 GENOTIPOS DE MAÍZ (Zea maiz CON FINES FORRAJEROS EN EL VALLE DEL SINÚ MEDIO

Directory of Open Access Journals (Sweden)

Roberto Cabrales

2007-12-01

Full Text Available Objetivo. Evaluar agronómicamente 25 genotipos de maíz con fines forrajeros. Materiales y métodos. La investigación se realizó en predios del centro de Investigación Turipaná de Corpoica, departamento de Córdoba. Se empleó un diseño de campo en latice 5x5, con 25 tratamientos y tres repeticiones por tratamiento. Resultados. Los genotipos de maíz, que mostraron los mayores rendimientos de materia fresca, seca y de grano fueron: HIT 34 con 63.52 Ton/ha de materia fresca,22.11 Ton/ha de materia seca y 3.10 Ton/ha de grano; VERA 225 con 61.13 Ton/ha de materia fresca, 20.11 Ton/ha de materia seca y 4.37 Ton/ha de grano; SNLP 111 con 60.62 Ton/ha de materia fresca, 19.20 Ton/ha de materia seca y 4.69 Ton/ha de grano; ICA V 156 con 54.51 Ton/ha de materia fresca, 17.1 Ton/ha de materia seca y 4.41 Ton/ha de grano. En cuanto a prolificidad mostró como mejores genotipos el vera 225 con 1 mazorca por planta, siendo el segundo genotipo en producción de materia fresca y uno de los mayores en producción de grano; en índice de grano se destaco el SNLP 111 con 82.87%, destacándose como el genotipo de mayor producción de grano. Con respecto a la materia seca de hoja/tallo/mazorca sobresalieron los genotipos CUBA 91 con 33.63%: 20.43%: 45.97% e ICA V 156 con 32.33%: 24.43%: 43.23% respectivamente. Conclusiones. Se cuenta con buenos genotipos de maíz para ser empleados por los ganaderos en procesos de ensilaje.

HA-Coated Implant

DEFF Research Database (Denmark)

Daugaard, Henrik; Søballe, Kjeld; Bechtold, Joan E

2014-01-01

of improving the fixation of implants. Of these, hydroxyapatite (HA) is the most widely used and most extensively investigated. HA is highly osseoconductive, and the positive effect is well documented in both basic and long-term clinical research [1–6]. This chapter describes experimental and clinical studies...

Morphological Effects of HA on the Cell Compatibility of Electrospun HA/PLGA Composite Nanofiber Scaffolds

Directory of Open Access Journals (Sweden)

Adnan Haider

2014-01-01

Full Text Available Tissue engineering is faced with an uphill challenge to design a platform with appropriate topography and suitable surface chemistry, which could encourage desired cellular activities and guide bone tissue regeneration. To develop such scaffolds, composite nanofiber scaffolds of nHA and sHA with PLGA were fabricated using electrospinning technique. nHA was synthesized using precipitation method, whereas sHA was purchased. The nHA and sHA were suspended in PLGA solution separately and electrospun at optimized electrospinning parameters. The composite nanofiber scaffolds were characterized by FE-SEM, EDX analysis, TEM, XRD analysis, FTIR, and X-ray photoelectron. The potential of the HA/PLGA composite nanofiber as bone scaffolds in terms of their bioactivity and biocompatibility was assessed by culturing the osteoblastic cells onto the composite nanofiber scaffolds. The results from in vitro studies revealed that the nHA/PLGA composite nanofiber scaffolds showed higher cellular adhesion, proliferation, and enhanced osteogenesis performance, along with increased Ca+2 ions release compared to the sHA/PLGA composite nanofiber scaffolds and pristine PLGA nanofiber scaffold. The results show that the structural dependent property of HA might affect its potential as bone scaffold and implantable materials in regenerative medicine and clinical tissue engineering.

Marine mud and manure treatment in Ultisols increase pH and phosphate availability and affectCapsicum annum L. grows and production

Directory of Open Access Journals (Sweden)

F. Matulessy

2015-07-01

Full Text Available Marine mud and manure has potentially to improve ultisol soil condition, especially in soil acidity, CEC, base saturation, neutralizing organic acid, improving soil structure, soil nutrient retention, aeration, soil humidity, capacity of water holding capacity and infiltration and enhance the rapid supply of phosphate for plant grows and development. Two treatments, namely planting media with 200 ton.ha-1 marine mud and 30 ton.ha-1 manure and 400 ton.ha-1 marine mud and 30 ton.ha-1 manure were able to increase pH from 4.6 to 5.6.Significant decrease of Alexcsolubility about 0.03 meq.100 g-1 was found in M1O3; M2O1; M2O3 and M3O1 treatment about. Increase of phosphate about 5.02 ppm was found at treatment 200 ton.ha-1 marine mud and 30 ton.ha-1 manure. There are significant interaction in plant high about 62.42 cm in the media without marine mud and 30 ton.ha-1manure treatments. The amount of 30 ton,ha-1manure produce plant with leaf size about 95,52 cm2.tan-1and produce fresh fruit about 9.81 ton.ha-1.

In vivo evidence of TonB shuttling between the cytoplasmic and outer membrane in Escherichia coli.

Science.gov (United States)

Larsen, Ray A; Letain, Tracy E; Postle, Kathleen

2003-07-01

Gram-negative bacteria are able to convert potential energy inherent in the proton gradient of the cytoplasmic membrane into active nutrient transport across the outer membrane. The transduction of energy is mediated by TonB protein. Previous studies suggest a model in which TonB makes sequential and cyclic contact with proteins in each membrane, a process called shuttling. A key feature of shuttling is that the amino-terminal signal anchor must quit its association with the cytoplasmic membrane, and TonB becomes associated solely with the outer membrane. However, the initial studies did not exclude the possibility that TonB was artifactually pulled from the cytoplasmic membrane by the fractionation process. To resolve this ambiguity, we devised a method to test whether the extreme TonB amino-terminus, located in the cytoplasm, ever became accessible to the cys-specific, cytoplasmic membrane-impermeant molecule, Oregon Green(R) 488 maleimide (OGM) in vivo. A full-length TonB and a truncated TonB were modified to carry a sole cysteine at position 3. Both full-length TonB and truncated TonB (consisting of the amino-terminal two-thirds) achieved identical conformations in the cytoplasmic membrane, as determined by their abilities to cross-link to the cytoplasmic membrane protein ExbB and their abilities to respond conformationally to the presence or absence of proton motive force. Full-length TonB could be amino-terminally labelled in vivo, suggesting that it was periplasmically exposed. In contrast, truncated TonB, which did not associate with the outer membrane, was not specifically labelled in vivo. The truncated TonB also acted as a control for leakage of OGM across the cytoplasmic membrane. Further, the extent of labelling for full-length TonB correlated roughly with the proportion of TonB found at the outer membrane. These findings suggest that TonB does indeed disengage from the cytoplasmic membrane during energy transduction and shuttle to the outer membrane.

Design and fabrication of carbon fibers with needle-like nano-HA coating to reinforce granular nano-HA composites.

Science.gov (United States)

Wang, Xudong; Zhao, Xueni; Zhang, Li; Wang, Wanying; Zhang, Jing; He, Fuzhen; Yang, Jianjun

2017-08-01

Carbon fibers (CFs) with needle-like nano-hydroxyapatite (nHA) coating were first used as reinforcing materials named nHA-CFs to improve the mechanical properties of pure HA. A powder mixture containing nHA-CFs and granular nano-HA (gHA) was directly sintered by hot pressing at appropriate sintering pressure and temperature. A three-phase nHA-CFs/gHA composite was designed, fabricated, and used as an artificial bone. Results show that the bending strengths of the nHA-CFs/gHA composite are approximately 41.1% and 59.2% higher than those of CFs/gHA composite and pure HA, respectively. The possible reinforcing mechanism of nHA-CFs in the composite is also proposed at the end. When nHA-CFs are applied for preparation of nHA-CFs/gHA composites, the internal stress on its phase boundary with gHA matrix generated during cooling of sintered is significantly reduced due to the presence of the nHA coatings. It infers that nHA coatings on CFs might act as a bridge to control the forming of interfacial gaps between the gHA matrix and the CFs effectively. Our work provides additional insights into the feasibility of nHA-CFs/gHA composites as load-bearing implant materials in clinical applications. Copyright © 2017 Elsevier B.V. All rights reserved.

2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy

Energy Technology Data Exchange (ETDEWEB)

None

2016-07-06

This product builds on previous efforts, namely the 2005 Billion-Ton Study (BTS) and the 2011 U.S. Billion-Ton Update (BT2).With each report, greater perspective is gained on the potential of biomass resources to contribute to a national energy strategy. Similarly, each successive report introduces new questions regarding commercialization challenges. BTS quantified the broad biophysical potential of biomass nationally, and BT2 elucidated the potential economic availability of these resources. These reports clearly established the potential availability of up to one billion tons of biomass resources nationally. However, many questions remain, including but not limited to crop yields, climate change impacts, logistical operations, and systems integration across production, harvest, and conversion. The present report aims to address many of these questions through empirically modeled energy crop yields, scenario analysis of resources delivered to biorefineries, and the addition of new feedstocks. Volume 2 of the 2016 Billion-Ton Report is expected to be released by the end of 2016. It seeks to evaluate environmental sustainability indicators of select scenarios from volume 1 and potential climate change impacts on future supplies.

Cu retention in an acid soil amended with perlite winery waste.

Science.gov (United States)

Rodríguez-Salgado, Isabel; Pérez-Rodríguez, Paula; Gómez-Armesto, Antía; Nóvoa-Muñoz, Juan Carlos; Arias-Estévez, Manuel; Fernández-Calviño, David

2016-02-01

The effect of perlite waste from a winery on general soil characteristics and Cu adsorption was assessed. The studied soil was amended with different perlite waste concentrations corresponding to 10, 20, 40 and 80 Mg ha(-1). General soil characteristics and Cu adsorption and desorption curves were determined after different incubation times (from 1 day to 8 months). The addition of perlite waste to the soil increased the amounts of organic matter as well as soil nutrients such as phosphorus and potassium, and these increments were stable with time. An increase in Cu adsorption capacity was also detected in the perlite waste-amended soils. The effect of perlite waste addition to the soil had special relevance on its Cu adsorption capacity at low coverage concentrations and on the energy of the soil-Cu bonds.

GROWTH AND YIELD OF ORGANIC RICE WITH COW MANURE APPLICATION IN THE FIRST CROPPING SEASON

Directory of Open Access Journals (Sweden)

Wahyu Arif Sudarsono

2014-02-01

Full Text Available The study was addressed to investigating the effect of cow manure application rate on organic rice growth and yield in the first cropping season. The study was conducted from January to April 2012 in Blora, Central Java, Indonesia. The experiment was arranged in Randomized Complete Block Design, consisting of four treatments and four replications. There were two types of control treatments i.e. organic fertilizer treatments (statistically analyzed and conventional fertilizer (not statistically analyzed. The treatments were corn biomass, corn biomass+cow manure (7.5 tons ha-1, corn biomass+cow manure (10 tons ha-1 and cow manure (10 tons ha-1 with square spacing of 20 cm x 20 cm. The organic control treatments were corn biomass+sheep manure (7.5 tons ha-1 with spacing of 20 cm x 20 cm and corn biomass+cow manure (7.5 tons ha-1 with double-row spacing of 40 cm x 25 cm x 15 cm. For every treatment, the rate of corn biomass was 3 tons ha-1. All organic treatments were also added with 3 tons rice hull ash ha-1. The application of cow manure (10 tons ha-1 with square spacing or corn biomass+cow manure (7.5 tons ha-1 with double-row spacing resulted in better performance than those of other treatments.

Effect of n-HA with different surface-modified on the properties of n-HA/PLGA composite

Energy Technology Data Exchange (ETDEWEB)

Jiang Liuyun, E-mail: jlytxg@163.com [Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences, Chengdu 610041 (China); Xiong Chengdong; Chen Dongliang [Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences, Chengdu 610041 (China); Jiang Lixin [Chengdu Institute of Organic Chemistry, Chinese Academy of Sciences, Chengdu 610041 (China); Graduated School of Chinese Academy of Sciences, Beijing 100039 (China); Pang Xiubing [Zhejiang Apeloa Medical Technology Co. Ltd, Jinhua 322118 (China)

2012-10-15

Graphical abstract: The bend strength of n-HA/PLGA composite with the unmodified n-HA becomes lower than that of PLGA. However, when n-HA was modified by different methods, the bend strength of g-n-HA/PLGA composites gets a little increase than PLGA, and the g3-n-HA/PLGA shows the highest bend strength at 3% g3-n-HA loading amount in weight, reached 162 MPa, which was 24.4% higher than that of pure PLGA. Highlights: Black-Right-Pointing-Pointer A new surface modification method for n-HA of combining stearic acid with surface-grafting L-lactic was adopted. Black-Right-Pointing-Pointer Three different surface modification methods for n-HA were compared in detail. Black-Right-Pointing-Pointer The new surface modification method was the most ideal method in this study. Black-Right-Pointing-Pointer The g3-n-HA/PLGA composite had the highest bending strength, which would be potential to be used as bone fracture internal fixation materials. - Abstract: Three different surface modification methods for nano-hydroxyapatite (n-HA) of stearic acid, grafted with L-lactide, combining stearic acid and surface-grafting L-lactic were adopted, respectively. The surface modification reaction and the effect of different methods were evaluated by Fourier transformation infrared (FTIR), X-ray photoelectron spectra (XPS), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM). The results showed that n-HA surfaces were all successful modified, and the modification method of combining stearic acid and surface-grafting L-lactic had the greatest grafting amount and the best dispersion among the three modification methods. Then, the n-HA with three different surface modification and unmodified n-HA were introduced into PLGA, respectively, and a serials of n-HA/PLGA composites with 3% n-HA amount in weight were prepared by solution mixing, and the properties of n-HA/PLGA composites were also investigated by electromechanical universal tester and scanning electron

Dilution Refrigeration of Multi-Ton Cold Masses

CERN Document Server

Wikus, P; CERN. Geneva

2007-01-01

Dilution refrigeration is the only means to provide continuous cooling at temperatures below 250 mK. Future experiments featuring multi-ton cold masses require a new generation of dilution refrigeration systems, capable of providing a heat sink below 10 mK at cooling powers which exceed the performance of present systems considerably. This thesis presents some advances towards dilution refrigeration of multi-ton masses in this temperature range. A new method using numerical simulation to predict the cooling power of a dilution refrigerator of a given design has been developed in the framework of this thesis project. This method does not only allow to take into account the differences between an actual and an ideal continuous heat exchanger, but also to quantify the impact of an additional heat load on an intermediate section of the dilute stream. In addition, transient behavior can be simulated. The numerical model has been experimentally verified with a dilution refrigeration system which has been designed, ...

Land spreading of sewage sludge in forest plantations: effects on the growth of the duckweed Lemna minor and trace metal bioaccumulation in the snail Cantareus aspersus.

Science.gov (United States)

Mohamed, Bourioug; Frédéric, Gimbert; Laurence, Alaoui-Sehmer; Pierre-Marie, Badot; Badr, Alaoui-Sossé; Lotfi, Aleya

2016-05-01

Wastewater plants generated annually millions of tons of sewage sludge (SS). Large amounts of this organic residue are spread on agricultural lands as a fertilizer, although it is viewed as a major potential source of contamination, presenting a danger to the terrestrial and aquatic environments. This study was undertaken to evaluate the impact of this practice on the duckweed Lemna minor and the snail Cantareus aspersus. Sludge was applied to soil either at six different loading rates equal to 0, 0.4, 3, 10, 30, and 60 tons dry matter (DM) ha(-1) for L. minor test or at three rates equal to 0, 30, and 60 tons DM ha(-1) for C. aspersus test. At the highest rate of SS application (60 tons DM ha(-1)), the eluates showed that an increase in pH (6.1) resulted in a decrease in Al levels. Thus, the high stimulation of L. minor growth observed after this high rate of SS application can be explained by (i) a reduction in Al toxicity after precipitation and (ii) macro- and micronutrient enrichment. At a rate of SS application of only 30 tons DM ha(-1), growth appeared to be slightly significant (p < 0.05), in spite of the significant increase in essential mineral elements. However, it is very difficult to discriminate between Al toxicity and pH effects. For the test with C. aspersus, the snail biomass was not affected by sludge application over the exposure period. Mortality was extremely low, with a rate of less than 4 % at the last sampling date. Yet, Cu, Pb, and Cd accumulated significantly in the soft body of snails exposed to SS application, suggesting that the amount of metals excreted is lower than that absorbed. In contrast, Zn levels remain constant, inferring that absorption and elimination of Zn are balanced at the beginning of the experiment.

Operation and maintenance techniques of 1 ton bucket elevator in IMEF

International Nuclear Information System (INIS)

Soong, Woong Sup

1999-04-01

IMEF pool is used as a pathway between pool and hot cell in order to transfer (incoming and outgoing) irradiated materials. Transfer is performed by 1 ton bucket elevator which is moved inside the rectangular tube installed between pool and M1 hot cell. Allowable load capacity is 1 ton of the bucket elevator and its size is 25 X 25 X 150 cm. Bucket is driven by chain system which is moved up and down through the guide rail. Guide rail is installed in rectangular tube that is tilted about 63 degree. Chain which is moved by using the roller sliding method is driven by sprocket wheel being rotated by the shaft and the shaft is driven by gear reducing motor. In this report operation and maintenance techniques of 1 ton bucket elevator in IMEF are described in detail. (Author). 8 refs., 14 tabs., 6 figs

Operation and maintenance techniques of 1 ton bucket elevator in IMEF

Energy Technology Data Exchange (ETDEWEB)

Soong, Woong Sup

1999-04-01

IMEF pool is used as a pathway between pool and hot cell in order to transfer (incoming and outgoing) irradiated materials. Transfer is performed by 1 ton bucket elevator which is moved inside the rectangular tube installed between pool and M1 hot cell. Allowable load capacity is 1 ton of the bucket elevator and its size is 25 X 25 X 150 cm. Bucket is driven by chain system which is moved up and down through the guide rail. Guide rail is installed in rectangular tube that is tilted about 63 degree. Chain which is moved by using the roller sliding method is driven by sprocket wheel being rotated by the shaft and the shaft is driven by gear reducing motor. In this report operation and maintenance techniques of 1 ton bucket elevator in IMEF are described in detail. (Author). 8 refs., 14 tabs., 6 figs.

Carencias de la realidad: conciencia, universo y mecánica cuántica. Ramón Lapiedra expone la inviabilidad cuántica del universo determinista

Directory of Open Access Journals (Sweden)

Javier Monserrat

2015-02-01

Full Text Available Hoy en día es imposible entender no sólo la ontología del mundo físico, sino también la del mundo viviente y humano, o sea, entender la ontología del universo, de la vida y del hombre (la conciencia, sin hacerlo de acuerdo con la imagen de la realidad que nos ha propuesto la mecánica cuántica. Para Ramón Lapiedra esta imagen cuántica nos lleva a entender que, detrás de nuestras experiencias o medidas experimentales, se esconde una enigmática realidad cuántica «con carencias de realidad» que excluye el determinismo absoluto…

Nouvelles Techniques d'Intervention sur la Corrosion des Armatures du Béton Armé

CERN Document Server

Colloca, C

1999-01-01

Les principaux dégâts constatés dans les armatures passives du béton armé sont la corrosion généralisée et la corrosion locale. Ces dégradations sont provoquées soit par la carbonatation du béton soit par le contact avec l'eau pure ou l'eau chargée de chlorures pénétrant dans les pores et dans les fissures de surface. Ce document présente de nouvelles techniques d'intervention, fondées sur d'anciens principes, introduites pour le traitement électrochimique des zones altérées liées aux différentes conditions. La réalcalinisation (dans le cas de béton carbonaté) permet d'augmenter le pH du béton et de rétablir un niveau de basicité garantissant la passivation de l'armature. La désalification (dans le cas de béton entamé par les chlorures) provoque l'élimination des ions chlorure à travers la surface du béton. Les avantages de ces traitements, par rapport aux anciennes techniques, sont appréciables si l'on considère la durée d'exécution et leur coût moins élevé.

Etude comparative de la cinétique de la réaction d’hydratation des bétons autoplaçants et des bétons vibrés

Directory of Open Access Journals (Sweden)

Ahmed Gargouri

2014-04-01

En effet, la nature exothermique de la réaction chimique du ciment peut induire des déformations de dilatation et de contraction. Par ailleurs, la dépression capillaire crée par la consommation d’eau due à l’hydratation du ciment entraine un retrait de dessiccation. Ces déformations peuvent entrainer des micros fissurations pouvant affecter la durabilité de l’ouvrage à long terme surtout pour les ouvrages épais. D’où l’importance d’étudier la cinétique d’hydratation de ses bétons non conventionnels et de les comparer à celle des bétons vibrés traditionnels. L’évolution de la température adiabatique ainsi que la variation en fonction du temps du degré d’hydratation sont déterminées pour le béton autoplaçant et le béton vibré. L’analyse des résultats expérimentaux obtenus montre que le changement de composition modifie considérablement la cinétique de la réaction d’hydratation.

Adhesive strength of hydroxyl apatite(HA coating and biomechanics behavior of HA-coated prosthesis:an experimental study

Directory of Open Access Journals (Sweden)

Tian-yang ZHANG

2011-05-01

Full Text Available Objective To explore the influence of adhesive strength of hydroxyapatite(HA coating on the post-implantation stability of HA-coated prosthesis.Methods The adhesive strength and biomechanics behavior of HA coating were studied by histopathological observation,material parameters and biomechanical testing,the titanium(Ti-coated prosthesis was employed as control.Results Scratch test showed that the adhesive strength of HA coating was significantly lower than that of Ti coating(P < 0.01.Histopathological examination and bone morphometry showed that,at the early stage of prosthesis implantation,the bony growth around HA-coated prosthesis was significantly higher than that around Ti-coated prosthesis(P < 0.01,but the ultimate shear strength of HA-coated prosthesis was much lower than that of Ti-coated prosthesis(P < 0.01.After the push-out test with prosthesis,histopathological observation showed that there were accumulations of clump-and strip-like granular residues on the surface of bones that newly grew around the HA-coated prosthesis,and surface energy-dispersive X-ray spectroscopy(EDX analysis also confirmed that the shear stress induced HA decohesion from the substrate of prosthesis.Conclusions Although HA coating showed a satisfactory effect on early bone formation and prosthetic stability,due to the deficiencies of adhesive strength,the early stability of prosthesis may be gradually destroyed by the shear loads of human body and coating degradation.

Semiportable load-cell-based weighing system prototype of 18.14-metric-ton (20-ton) capacity for UF6 cylinder weight verifications: description and testing procedure

International Nuclear Information System (INIS)

McAuley, W.A.

1984-01-01

The 18.14-metric-ton-capacity (20-ton) Load-Cell-Based Weighing System (LCBWS) prototype tested at the Oak Ridge (Tennessee) Gaseous Diffusion Plant March 20-30, 1984, is semiportable and has the potential for being highly accurate. Designed by Brookhaven National Laboratory, it can be moved to cylinders for weighing as opposed to the widely used operating philosophy of most enrichment facilities of moving cylinders to stationary accountability scales. Composed mainly of commercially available, off-the-shelf hardware, the system's principal elements are two load cells that sense the weight (i.e., force) of a uranium hexafluoride (UF 6 ) cylinder suspended from the LCBWS while the cylinder is in the process of being weighed. Portability is achieved by its attachment to a double-hook, overhead-bridge crane. The LCBWS prototype is designed to weigh 9.07- and 12.70-metric ton (10- and 14-ton) UF 6 cylinders. A detailed description of the LCBWS is given, design information and criteria are supplied, a testing procedure is outlined, and initial test results are reported. A major objective of the testing is to determine the reliability and accuracy of the system. Other testing objectives include the identification of (1) potential areas for system improvements and (2) procedural modifications that will reflect an improved and more efficient system. The testing procedure described includes, but is not limited to, methods that account for temperature sensitivity of the instrumentation, the local variation in the acceleration due to gravity, and buoyance effects. Operational and safety considerations are noted. A preliminary evaluation of the March test data indicates that the LCBWS prototype has the potential to have an accuracy in the vicinity of 1 kg

Adhesive strength of hydroxyl apatite(HA) coating and biomechanics behavior of HA-coated prosthesis:an experimental study

OpenAIRE

Tian-yang ZHANG; Yong-hong DUAN; Shu ZHU; Jin-yu ZHU; Qing-sheng ZHU

2011-01-01

Objective To explore the influence of adhesive strength of hydroxyapatite(HA) coating on the post-implantation stability of HA-coated prosthesis.Methods The adhesive strength and biomechanics behavior of HA coating were studied by histopathological observation,material parameters and biomechanical testing,the titanium(Ti)-coated prosthesis was employed as control.Results Scratch test showed that the adhesive strength of HA coating was significantly lower than that of Ti coating(P < 0.01).Hist...

Pengaruh Pemberian Kompos Jerami Dan Pupuk Sp-36 Pada Tanah Sulfat Masam Potensial Terhadap Perubahan Sifat Kimia Serta Pertumbuhan Dan Produksi Padi (Oryza Sativa L.)

OpenAIRE

Bhakari, Herlina Eka

2013-01-01

The objective of this research is to study the effect of rice straw compost and the application of phosphorus fertilizer of SP-36 on chemical characteristic of acid sulphate soils, rice growth and production (Oryza sativa L). This study used a randomized block design factorial, with 2 factors : factor 1 : rice straw compost treatment (J) wich consist of : J0 = 0 ton ha-1 (0 g straw/pot) ; J1 = 10 ton ha-1 (40 g straw/pot); J2 = 20 ton ha-1 (80 g straw /pot); J3 = 30 ton ha-1 ...

PENGARUH DOSIS PUPUK KANDANG TERHADAP STABILITAS AGREGAT TANAH PADA SISTEM PERTANIAN ORGANIK

Directory of Open Access Journals (Sweden)

- Mustoyo

2016-02-01

Full Text Available Organic matter is important to soil aggregate stability. The research of effect dosage of goat manure tos oil aggregate in organic farming system was do neon Andisols soil in Permata Hati Farm, CiburialHamlet, North Tugu village, Cisarua sub-district, Bogor district, West Java province. The research was conducted on October 2012 until the end of February 2013. The research purposes are: a Know the goat manure’s dosage influence on soil aggregate in organik farming system, b Determine the dos age of goat manure that can provide the best Mean Weight Diameter (MWD and Aggregate Stability Index (ASIin organik farming system. The research used randomized completely block design (RCBD with 6 treatments and 3 replications. Goat manure dosage were used as treatments are 0 ton ha-1, 5 ton ha-1, 10 ton ha-1, 15 ton ha-1, 20 ton ha-1, and 25 ton ha-1. Data was analyzed by ANOVA and Duncan’sMultiple Range Test (DMRT at 5% level. The research results are showed, with initial number of C-organic >4.5%, goat manure application was significant to change soil aggregate. Goat Manure 5 ton ha-1was enough to increasing Mean Weight Diameter (MWD and ASI (Aggregate Stability Index.

The HaDREB2 transcription factor enhances basal thermotolerance and longevity of seeds through functional interaction with HaHSFA9

Directory of Open Access Journals (Sweden)

Carranco Raúl

2009-06-01

Full Text Available Abstract Background Transcription factor HaDREB2 was identified in sunflower (Helianthus annuus L. as a drought-responsive element-binding factor 2 (DREB2 with unique properties. HaDREB2 and the sunflower Heat Shock Factor A9 (HaHSFA9 co-activated the Hahsp17.6G1 promoter in sunflower embryos. Both factors could be involved in transcriptional co-activation of additional small heat stress protein (sHSP promoters, and thus contribute to the HaHSFA9-mediated enhancement of longevity and basal thermotolerance of seeds. Results We found that overexpression of HaDREB2 in seeds did not enhance longevity. This was deduced from assays of basal thermotolerance and controlled seed-deterioration, which were performed with transgenic tobacco. Furthermore, the constitutive overexpression of HaDREB2 did not increase thermotolerance in seedlings or result in the accumulation of HSPs at normal growth temperatures. In contrast, when HaDREB2 and HaHSFA9 were conjointly overexpressed in seeds, we observed positive effects on seed longevity, beyond those observed with overexpression of HaHSFA9 alone. Such additional effects are accompanied by a subtle enhancement of the accumulation of subsets of sHSPs belonging to the CI and CII cytosolic classes. Conclusion Our results reveal the functional interdependency of HaDREB2 and HaHSFA9 in seeds. HaDREB2 differs from other previously characterized DREB2 factors in plants in terms of its unique functional interaction with the seed-specific HaHSFA9 factor. No functional interaction between HaDREB2 and HaHSFA9 was observed when both factors were conjointly overexpressed in vegetative tissues. We therefore suggest that additional, seed-specific factors, or protein modifications, could be required for the functional interaction between HaDREB2 and HaHSFA9.

Twitching motility and biofilm formation are associated with tonB1 in Xylella fastidiosa.

Science.gov (United States)

Cursino, Luciana; Li, Yaxin; Zaini, Paulo A; De La Fuente, Leonardo; Hoch, Harvey C; Burr, Thomas J

2009-10-01

A mutation in the Xylella fastidiosa tonB1 gene resulted in loss of twitching motility and in significantly less biofilm formation as compared with a wild type. The altered motility and biofilm phenotypes were restored by complementation with a functional copy of the gene. The mutation affected virulence as measured by Pierce's disease symptoms on grapevines. The role of TonB1 in twitching and biofilm formation appears to be independent of the characteristic iron-uptake function of this protein. This is the first report demonstrating a functional role for a tonB homolog in X. fastidiosa.

Mapping boreal forest biomass with imagery from polarimetric and semi-polarimetric SAR sensors / Mapeamento da biomassa fl orestal boreal com imagens dos sensores SAR polarimétricos e semi-polarimétricos

Directory of Open Access Journals (Sweden)

Yrjo Rauste

2008-09-01

Full Text Available Data from ALOS/Palsar and TerraSAR-X were used to estimate forest biomass in Boreal forest zone in Finland. In the study site in Heinavesi (forest biomass between 0 and 255 tons/ha, the HH-polarised componentof dual-polarised ALOS/Palsar produced biomass estimation accuracies (RMSE between 35 and 42 tons/ha. In the Kuortane site (biomass0…188 tons/ha the RMSE varied between 25 and 28 tons/ha. Since onlytwo winter-time scenes from TerraSAR-X were available, TerraSAR-X results were very preliminary. The phase of the HH-VV cross-coherenceproduced the highest biomass-correlations among the TerraSAR-X derived features. This produced a biomass estimation accuracy (RMSE of 49 tons/ha in the Heinavesi study site.

Response Surface Model (RSM)-based Benefit Per Ton Estimates

Science.gov (United States)

The tables below are updated versions of the tables appearing in The influence of location, source, and emission type in estimates of the human health benefits of reducing a ton of air pollution (Fann, Fulcher and Hubbell 2009).

Confined Mobility of TonB and FepA in Escherichia coli Membranes.

Directory of Open Access Journals (Sweden)

Yoriko Lill

Full Text Available The important process of nutrient uptake in Escherichia coli, in many cases, involves transit of the nutrient through a class of beta-barrel proteins in the outer membrane known as TonB-dependent transporters (TBDTs and requires interaction with the inner membrane protein TonB. Here we have imaged the mobility of the ferric enterobactin transporter FepA and TonB by tracking them in the membranes of live E. coli with single-molecule resolution at time-scales ranging from milliseconds to seconds. We employed simple simulations to model/analyze the lateral diffusion in the membranes of E.coli, to take into account both the highly curved geometry of the cell and artifactual effects expected due to finite exposure time imaging. We find that both molecules perform confined lateral diffusion in their respective membranes in the absence of ligand with FepA confined to a region [Formula: see text] μm in radius in the outer membrane and TonB confined to a region [Formula: see text] μm in radius in the inner membrane. The diffusion coefficient of these molecules on millisecond time-scales was estimated to be [Formula: see text] μm2/s and [Formula: see text] μm2/s for FepA and TonB, respectively, implying that each molecule is free to diffuse within its domain. Disruption of the inner membrane potential, deletion of ExbB/D from the inner membrane, presence of ligand or antibody to FepA and disruption of the MreB cytoskeleton was all found to further restrict the mobility of both molecules. Results are analyzed in terms of changes in confinement size and interactions between the two proteins.

A method to press powder at 6000 ton using small amount of explosive

Science.gov (United States)

Hilmi, Ahmad Humaizi; Azmi, Nor Azmaliana; Ismail, Ariffin

2017-12-01

Large die hydraulic press forces are one of the key instruments in making jumbo planes. The machine can produce aircraft components such as wing spars, landing gear supports and armor plates. Superpower nations such as USA, Russia, Germany, Japan, Korea and China have large die hydraulic press which can press 50,000 tons. In Malaysia, heavy-duty press is available from companies such as Proton that builds chassis for cars. However, that heavy-duty press is not able to produce better bulkhead for engines, fuselage, and wings of an aircraft. This paper presents the design of an apparatus that uses 50 grams of commercial grade explosives to produce 6000 tons of compaction. This is a first step towards producing larger scale apparatus that can produce 50,000-ton press. The design was done using AUTODYN blast simulation software. According to the results, the maximum load the apparatus can withstand was 6000 tons which was contributed by 50 grams of commercial explosive(Emulex). Explosive size larger than 50 grams will lead to catastrophic failure. Fabrication of the apparatus was completed. However, testing of the apparatus is not presented in this article.

Kajian Sifat Kimia Tanah, Pertumbuhan Dan Produksi Padi Pada Tanah Sulfat Masam Potensial Akibat Pemberian Kompos Tandan Kosong Kelapa Sawit Dan Pupuk Sp-36

OpenAIRE

Tambunan, Sri Wahyuni; Fauzi, Fauzi; Purba, Marpaung

2013-01-01

The objective of this research is to study the effect of empty palm oil bunch compost (EPOBC) andthe application of phosphorus fertilizer of SP-36 on chemical characteristic of acid sulphate soils,rice growth and production (Oryza sativa L.). This study used a randomized block design factorial,with 2 factors: factor 1: compost EPOBC treatment (B) which consist of: B0 = 0 ton ha-1 (0g EPOBC/pot) ; B1 = 10 ton ha-1 (40 g EPOBC/pot); B2 = 20 ton ha-1 (80 g EPOBC/pot);B3 = 30 ton ha-1 (120 g EPOB...

Effects of Plant Density and Nitrogen Fertilizer on Quantity and Quality of Forage Corn in Daregaz Region (Iran

Directory of Open Access Journals (Sweden)

N. Saadatzadeh

2011-01-01

Full Text Available In order to evaluate the effects of plant density and nitrogen on quantity and quality of forage corn an experiment was conducted in Daregaz region in cropping season 2008 – 2009. The experimental design was a split – plot based on randomized complete block with three replications. The main plots were four levels of nitrogen (0 , 75, 150 and 225 kg/ha and sub plots were three levels of plant density (75000, 100000 and 125000 plant/ha. The results showed that increasing nitrogen levels and plant density, plant height, percentage crude protein and total protein production (ton/ha were increased. By increasing plant density, stem diameter, leaf and ear weight decreased while they increased with increased nitrogen levels. The highest forage yield obtained at nitrogen level 150 kg/ha (46 ton/ha and 100000 plant per hectare (40.27 ton/ha. The highest total protein production (7 ton/ha obtained at nitrogen level of 150 kg/ha and plant density of 125000 plant/ha.

POTENSI PENYERAPAN KARBON PADA KARET POLA TUMPANGSARI TANAMAN HUTAN

Directory of Open Access Journals (Sweden)

Sahuri Sahuri

2017-10-01

Full Text Available Rubber plant (Hevea brasilliensis has a very big role in the economy and the absorption of CO2. Rubber plants as well as forest plants capable of processing CO2 as a carbon source that is used for photosynthesis. CO2 absorption can be enhanced through the implementation of intercropping pattern rubber and forest plant. This study aims to determine the potential for carbon sequestration in intercropping pattern rubber and forest plant. The experiment was conducted at the Sembawa Research Station, South Sumatra, with three cropping pattern (PT, namely PT1: rubber plants + teak (Tectona grandis, PT2: rubber plants + trembesi (Samanea saman, PT3: rubber plant monocultures, PT4: teak monocultures, and PT5: trembesi plant monocultures. Measurement of carbon reserves consist of tree biomass and soil organic matter. The results showed that the amount of absorption of CO2/year in the rubber plantations for 10 years for PT1, PT2, PT3, PT4, and PT5, respectively were 86.46 tons/ha, 125.90 tons / ha, 77.90 tons/ha, 36.26 tons/ha and 49.03 tons/ha. The addition of carbon sequestration for 10 years due to intercrop rubber and forest plant was 30.13% or 49.17 tons CO2/ha compared to the rubber plant monocultures. Tanaman karet (Hevea brasilliensis memiliki peran yang sangat besar dalam perekonomian dan penyerapan CO2. Tanaman karet seperti halnya tanaman hutan mampu mengolah CO2 sebagai sumber karbon yang digunakan untuk fotosintesis. Penyerapan CO2 dapat ditingkatkan melalui penerapan pola tumpangsari karet dan tanaman hutan. Penelitian ini bertujuan untuk mengetahui potensi penyerapan karbon pada pola tumpangsari karet dan tanaman hutan. Penelitian dilaksanakan di kebun percobaan Balai Penelitian Sembawa, Sumatra Selatan, dengan tiga pola tanam (PT, yaitu PT1: tanaman karet + jati (Tectona grandis, PT2: tanaman karet + trembesi (Samanea saman, PT3: tanaman karet monokultur, PT4: tanaman jati monokultur, dan PT5: tanaman trembesi monokultur. Pengukuran

Molecular aspects of zygotic embryogenesis in sunflower (Helianthus annuus L.): correlation of positive histone marks with HaWUS expression and putative link HaWUS/HaL1L.

Science.gov (United States)

Salvini, Mariangela; Fambrini, Marco; Giorgetti, Lucia; Pugliesi, Claudio

2016-01-01

The link HaWUS/ HaL1L , the opposite transcriptional behavior, and the decrease/increase in positive histone marks bond to both genes suggest an inhibitory effect of WUS on HaL1L in sunflower zygotic embryos. In Arabidopsis, a group of transcription factors implicated in the earliest events of embryogenesis is the WUSCHEL-RELATED HOMEOBOX (WOX) protein family including WUSCHEL (WUS) and other 14 WOX protein, some of which contain a conserved WUS-box domain in addition to the homeodomain. WUS transcripts appear very early in embryogenesis, at the 16-cell embryo stage, but gradually become restricted to the center of the developing shoot apical meristem (SAM) primordium and continues to be expressed in cells of the niche/organizing center of SAM and floral meristems to maintain stem cell population. Moreover, WUS has decisive roles in the embryonic program presumably promoting the vegetative-to-embryonic transition and/or maintaining the identity of the embryonic stem cells. However, data on the direct interaction between WUS and key genes for seed development (as LEC1 and L1L) are not collected. The novelty of this report consists in the characterization of Helianthus annuus WUS (HaWUS) gene and in its analysis regarding the pattern of the methylated lysine 4 (K4) of the Histone H3 and of the acetylated histone H3 during the zygotic embryo development. Also, a parallel investigation was performed for HaL1L gene since two copies of the WUS-binding site (WUSATA), previously identified on HaL1L nucleotide sequence, were able to be bound by the HaWUS recombinant protein suggesting a not described effect of HaWUS on HaL1L transcription.

Effect of Different Levels of Nitrogen Fertilizer and Vermi-Compost on Yield and Quality of Sweet Corn (Zea mays Hybrid Chase

Directory of Open Access Journals (Sweden)

S. Habibi

2014-04-01

Full Text Available In order to investigate the effect of source and rate of nitrogen fertilizer on yield and quality of sweet corn, a field study was conducted in 2011 cropping season in Agriculture Experiment Station of College of Agriculture, University of Guilan. A randomized complete block design with three replications was used. Treatment consisted of four levels of nitrogen fertilizer (0, 46, 92 and 138 kg N ha-1 and integrated N of chemical and biological (23 kg N ha-1 + 1 ton ha-1 Vermi-compost, 46 kg N ha-1 + 2 ton ha-1 Vermi-compost, and 69 kg N ha-1 +3 ton ha-1 Vermi-compost and organic sources (2, 4 and 6 ton ha-1. Effect of source and rate of nitrogen fertilizer on fresh ear yield, grain yield canned, grain protein amount and dry matter digestibility percent had significant. With increscent nitrogen at treatments nitrogen fertilizer, organic ant integrated farming yield fresh ear, grain yield, grain protein amount and dry matter digestibility percent increased. Maximum yield fresh ear was obtained with 69 kg N ha-1 + 3 ton ha-1 Vermi-compost with an average 14595.9 kg ha-1. Maximum forage yield and dry forage yield obtained with an average 18619.5 and 3593 kg ha-1 at treatment with 69 kg N ha-1 + 3 ton ha-1 Vermi-compost. Results of this research showed that the best grain yield and quality, and forage yield and quality of sweet corn were obtained in integrated farming and organic methods in Rasht region conditions and same climatology conditions.

PEMBERIAN KOTORAN KAMBING TERHADAP PERTUMBUHAN DAN HASIL WORTEL (Daucus carota DAN BAWANG DAUN (Allium fistulosum L. DENGAN BUDIDAYA TUMPANGSARI

Directory of Open Access Journals (Sweden)

Trias Budi Rahayu

2016-03-01

Full Text Available Intercropping cultivation model is commonly used in organic farming system. The system is aimed to save land and fertilizer aside from creating biodiversity in a portion of a planting. The research was conducted in Permata Hati Farm, Ciburial Village, Cisarua Sub district, Bogor Regency, West Java from October 2012 to January 2013. The purposes of the research are: a to know the effect of goat dung application toward the growth and yield of organically managed carrot and scallion intercropping, and b to determine the best quantity of goat dung to promote growth and yield of carrot and scallion intercropping. Randomized Completely Block Design (RCBD with 6 treatments and 3 replications was used in this experiment. The treatments applied were 0 ton ha- 1, 5 ton ha-1, 10 ton ha-1, 15 ton ha-1, 20 ton ha-1, and 25 ton ha-1 of goat dung. Duncan’s Multiple Range Test (DMRT at the confidence level of 95% was used to analyze the result. The application of 15 ton ha-1 goat dung affected scallion’s height and number of seedlings as well as carrot’s biomass and height. This dosage resulted in the best yield of scallion and carrot intercropping.

Biomedical potential of chitosan/HA and chitosan/β-1,3-glucan/HA biomaterials as scaffolds for bone regeneration — A comparative study

Energy Technology Data Exchange (ETDEWEB)

Przekora, Agata, E-mail: agata.przekora@umlub.pl [Department of Biochemistry and Biotechnology, Medical University of Lublin, Chodzki 1, 20-093 Lublin (Poland); Palka, Krzysztof [Department of Materials Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin (Poland); Ginalska, Grazyna [Department of Biochemistry and Biotechnology, Medical University of Lublin, Chodzki 1, 20-093 Lublin (Poland)

2016-01-01

The aim of this work was to compare biomedical potential of chitosan/hydroxyapatite (chit/HA) and novel chitosan/β-1,3-glucan/hydroxyapatite (chit/glu/HA) materials as scaffolds for bone regeneration via characterization of their biocompatibility, porosity, mechanical properties, and water uptake behaviour. Biocompatibility of the scaffolds was assessed in direct-contact with the materials using normal human foetal osteoblast cell line. Cytotoxicity and osteoblast proliferation rate were evaluated. Porosity was assessed using computed microtomography analysis and mechanical properties were determined by compression testing. Obtained results demonstrated that chit/HA scaffold possessed significantly better mechanical properties (compressive strength: 1.23 MPa, Young's modulus: 0.46 MPa) than chit/glu/HA material (compressive strength: 0.26 MPa, Young's modulus: 0.25 MPa). However, addition of bacterial β-1,3-glucan to the chit/HA scaffold improved its flexibility and porosity. Moreover, chit/glu/HA scaffold revealed significantly higher water uptake capability (52.6% after 24 h of soaking) compared to the chit/HA (30.7%) and thus can serve as a very good drug delivery carrier. Chit/glu/HA scaffold was also more favourable to osteoblast survival (near 100% viability after 24-h culture), proliferation, and spreading compared to the chit/HA (63% viability). The chit/glu/HA possesses better biomedical potential than chit/HA scaffold. Nevertheless, poor mechanical properties of the chit/glu/HA limit its application to non-load bearing implantation area. - Highlights: • Chitosan/HA and chit/β-1,3-glucan/HA scaffolds for bone regeneration were compared. • Chit/HA significantly reduced osteoblast viability to 63% compared to chit/glu/HA. • Unlike chit/HA, chit/glu/HA favoured cell adhesion, spreading, and proliferation. • Chit/HA had better compressive strength and Young's modulus than chit/glu/HA. • Chit/glu/HA revealed significantly higher

Improving U.S.-India HA/DR Coordination in the Indian Ocean

Science.gov (United States)

2014-07-01

Indian Navy’s amphibious ships—INS Gharial, INS Mahish, INS Cheetah , and INS Kumbhir—shipped rice and other relief materials to Chittagong. Of the four...ships, INS Cheetah arrived first, on December 8, with 250 tons of rice. The tank-landing ship INS Gharial transported 4,000 tons of rice to

Osteoblast interaction with laser cladded HA and SiO2-HA coatings on Ti-6Al-4V

International Nuclear Information System (INIS)

Yang Yuling; Serpersu, Kaan; He Wei; Paital, Sameer R.; Dahotre, Narendra B.

2011-01-01

In order to improve the bioactivity and biocompatibility of titanium endosseous implants, the morphology and composition of the surfaces were modified. Polished Ti-6Al-4V substrates were coated by a laser cladding process with different precursors: 100 wt.% HA and 25 wt.% SiO 2 -HA. X-ray diffraction of the laser processed samples showed the presence of CaTiO 3 , Ca 3 (PO 4 ) 2 , and Ca 2 SiO 4 phases within the coatings. From in vitro studies, it was observed that compared to the unmodified substrate all laser cladded samples presented improved cellular interactions and bioactivity. The samples processed with 25 wt.% SiO 2 -HA precursor showed a significantly higher HA precipitation after immersion in simulated body fluid than 100 wt.% HA precursor and titanium substrates. The in vitro biocompatibility of the laser cladded coatings and titanium substrate was investigated by culturing of mouse MC3T3-E1 pre-osteoblast cell line and analyzing the cell viability, cell proliferation, and cell morphology. A significantly higher cell attachment and proliferation rate were observed for both laser cladded 100 wt.% HA and 25 wt.% SiO 2 -HA samples. Compared to 100 wt.% HA sample, 25 wt.% SiO 2 -HA samples presented a slightly improved cellular interaction due to the addition of SiO 2 . The staining of the actin filaments showed that the laser cladded samples induced a normal cytoskeleton and well-developed focal adhesion contacts. Scanning electron microscopic image of the cell cultured samples revealed better cell attachment and spreading for 25 wt.% SiO 2 -HA and 100 wt.% HA coatings than titanium substrate. These results suggest that the laser cladding process improves the bioactivity and biocompatibility of titanium. The observed biological improvements are mainly due to the coating induced changes in surface chemistry and surface morphology. Highlights: → Laser cladding of Ti alloys with bioceramics creates new phases. → Laser cladded samples with SiO 2 -doped

Characterization of New PEEK/HA Composites with 3D HA Network Fabricated by Extrusion Freeforming.

Science.gov (United States)

Vaezi, Mohammad; Black, Cameron; Gibbs, David M R; Oreffo, Richard O C; Brady, Mark; Moshrefi-Torbati, Mohamed; Yang, Shoufeng

2016-05-26

Addition of bioactive materials such as calcium phosphates or Bioglass, and incorporation of porosity into polyetheretherketone (PEEK) has been identified as an effective approach to improve bone-implant interfaces and osseointegration of PEEK-based devices. In this paper, a novel production technique based on the extrusion freeforming method is proposed that yields a bioactive PEEK/hydroxyapatite (PEEK/HA) composite with a unique configuration in which the bioactive phase (i.e., HA) distribution is computer-controlled within a PEEK matrix. The 100% interconnectivity of the HA network in the biocomposite confers an advantage over alternative forms of other microstructural configurations. Moreover, the technique can be employed to produce porous PEEK structures with controlled pore size and distribution, facilitating greater cellular infiltration and biological integration of PEEK composites within patient tissue. The results of unconfined, uniaxial compressive tests on these new PEEK/HA biocomposites with 40% HA under both static and cyclic mode were promising, showing the composites possess yield and compressive strength within the range of human cortical bone suitable for load bearing applications. In addition, preliminary evidence supporting initial biological safety of the new technique developed is demonstrated in this paper. Sufficient cell attachment, sustained viability in contact with the sample over a seven-day period, evidence of cell bridging and matrix deposition all confirmed excellent biocompatibility.

Characterization of New PEEK/HA Composites with 3D HA Network Fabricated by Extrusion Freeforming

Directory of Open Access Journals (Sweden)

Mohammad Vaezi

2016-05-01

Full Text Available Addition of bioactive materials such as calcium phosphates or Bioglass, and incorporation of porosity into polyetheretherketone (PEEK has been identified as an effective approach to improve bone-implant interfaces and osseointegration of PEEK-based devices. In this paper, a novel production technique based on the extrusion freeforming method is proposed that yields a bioactive PEEK/hydroxyapatite (PEEK/HA composite with a unique configuration in which the bioactive phase (i.e., HA distribution is computer-controlled within a PEEK matrix. The 100% interconnectivity of the HA network in the biocomposite confers an advantage over alternative forms of other microstructural configurations. Moreover, the technique can be employed to produce porous PEEK structures with controlled pore size and distribution, facilitating greater cellular infiltration and biological integration of PEEK composites within patient tissue. The results of unconfined, uniaxial compressive tests on these new PEEK/HA biocomposites with 40% HA under both static and cyclic mode were promising, showing the composites possess yield and compressive strength within the range of human cortical bone suitable for load bearing applications. In addition, preliminary evidence supporting initial biological safety of the new technique developed is demonstrated in this paper. Sufficient cell attachment, sustained viability in contact with the sample over a seven-day period, evidence of cell bridging and matrix deposition all confirmed excellent biocompatibility.

Valorisation et Recyclage des Déchets Plastiques dans le Béton

Directory of Open Access Journals (Sweden)

Benimam Samir

2014-04-01

Full Text Available La valorisation des déchets dans le génie civil est un secteur important dans la mesure où les produits que l’on souhaite obtenir ne sont pas soumis à des critères de qualité trop rigoureux. Le recyclage des déchets touche deux impacts très importants à savoir l’impact et l’impact économique. Donc plusieurs pays du monde, différents déchets sont utilisé dans le domaine de la construction et spécialement dans le ciment ou béton comme poudre, fibres ou agrégats. Ce travail s’intéresse à la valorisation d’un déchet qui est nuisible pour l’environnement vu son caractère encombrant et inesthétique il s’agit du déchet plastique. Trois types de déchets plastiques sont ajoutés dans le béton (sous forme de grains et fibres (ondulées et rectilignes. Les propriétés à l’état frais (maniabilité, air occlus et densité et à l’état durci (résistance à la compression, à la traction, retrait et absorption d’eau des différents bétons réalisés sont analysées et comparés par rapport leurs témoins respectifs. D’après les résultats expérimentaux on peut conclure que le renforcement de la matrice cimentaire avec des fibres plastiques ondulées montrent une nette amélioration de la résistance à la traction du béton ainsi qu’une diminution remarquable de sa capacité d’absorption de l’eau lorsqu’on utilise des grains plastiques.

Increase of alcohol yield per ton of pulp

Energy Technology Data Exchange (ETDEWEB)

Sokolov, B N

1957-01-01

Digestion processes of cellulose were studied under production conditions. When the digestion was carried out with acid having 5.2% total SO/sub 2/ and 0.92% CaO, the concentration of total sugars in the spent liquor was 1.8 to 2.5%. When the acidity was reduced to 4.8% total SO/sub 2/ and 0.82% CaO, all other conditions being the same, the sugar concentration in the spent liquor increased to 3.0 to 3.7%. The importance of the acid strength and CaO content of the cooking liquor was further demonstrated at the end of 1955. At that time the total SO/sub 2/ in the acid rose to 8% while the amount of CaO remained practically the same-0.85 to 0.90%. These conditions permitted an increase in the amount of ships by 25 to 30%, which further changed the ratio CaO: wood and created conditions favorable for an improved yield of sugar. The increase in the activity of the acid was reflected favorably in the degree of hydrolysis of the hemicelluloses and in the degree to which the oligosaccharides or polysaccharides were hydrolyzed to simple sugars. At that time the yield of alcohol reached 53 1/ton of unbleached pulp. The process was further improved in 1956 by the use of successive washings; at the end of the digestion period the concentrated spent liquor was piped to the alcohol unit. The yield of alcohol reached 59.4 1/ton of pulp. Sugar recovery from the tank was 92.5% of that theoretically possible. Further improvements resulted by saturating the wood chips with acid under variable pressures. As a result, the base of the cooking acid was reduced to 0.7 to 0.72% and, at the end of the process the liquor contained 0.03 to 0.06% CaO instead of 0.2 to 0.18%. The alcohol yield/ton of pulp then rose to 66.8 l.

Factory Acceptance Test Procedure Westinghouse 100 ton Hydraulic Trailer

International Nuclear Information System (INIS)

Aftanas, B.L.

1994-01-01

This Factory Acceptance Test Procedure (FAT) is for the Westinghouse 100 Ton Hydraulic Trailer. The trailer will be used for the removal of the 101-SY pump. This procedure includes: safety check and safety procedures; pre-operation check out; startup; leveling trailer; functional/proofload test; proofload testing; and rolling load test

ICARUS 600 ton: A status report

CERN Document Server

Vignoli, C; Badertscher, A; Barbieri, E; Benetti, P; Borio di Tigliole, A; Brunetti, R; Bueno, A; Calligarich, E; Campanelli, Mario; Carli, F; Carpanese, C; Cavalli, D; Cavanna, F; Cennini, P; Centro, S; Cesana, A; Chen, C; Chen, Y; Cinquini, C; Cline, D; De Mitri, I; Dolfini, R; Favaretto, D; Ferrari, A; Gigli Berzolari, A; Goudsmit, P; He, K; Huang, X; Li, Z; Lu, F; Ma, J; Mannocchi, G; Mauri, F; Mazza, D; Mazzone, L; Montanari, C; Nurzia, G P; Otwinowski, S; Palamara, O; Pascoli, D; Pepato, A; Periale, L; Petrera, S; Piano Mortari, Giovanni; Piazzoli, A; Picchi, P; Pietropaolo, F; Rancati, T; Rappoldi, A; Raselli, G L; Rebuzzi, D; Revol, J P; Rico, J; Rossella, M; Rossi, C; Rubbia, C; Rubbia, A; Sala, P; Scannicchio, D; Sergiampietri, F; Suzuki, S; Terrani, M; Ventura, S; Verdecchia, M; Wang, H; Woo, J; Xu, G; Xu, Z; Zhang, C; Zhang, Q; Zheng, S

2000-01-01

The goal of the ICARUS Project is the installation of a multi-kiloton LAr TPC in the underground Gran Sasso Laboratory. The programme foresees the realization of the detector in a modular way. The first step is the construction of a 600 ton module which is now at an advanced phase. It will be mounted and tested in Pavia in one year and then it will be moved to Gran Sasso for the final operation. The major cryogenic and purification systems and the mechanical components of the detector have been constructed and tested in a 10 m3 prototype. The results of these tests are here summarized.

Implications of\tenhanced\teffectiveness\tof\tvincristine\tsulfate/ε-viniferin combination\tcompared\tto\tvincristine\tsulfate\tonly\ton\tHepG2\tcells

Directory of Open Access Journals (Sweden)

Filiz\tÖzdemir

2016-12-01

Full Text Available Objective: This\tstudy\twas\tdesigned\tto\tinvestigate\tthe\teffects\tof\tε-viniferin\t(ε-VNF\ton\tthe\tmitochondrial\tpathway\tof\tapoptosis and\ton\tlate\tapoptosis\tin\tHepG2\tcell\tlines.\tTo\tobserve\tthese\teffects,\tε-VNF\tand\tvincristine\tsulfate\t(VNC,\tanti-cancer\tdrugs\tused for\ttreatment\ton\tHepG2\tcells,\twere\tadministered\teither\talone\tor\tin\tcombination\tat\tdifferent\ttime\tintervals. Methods:\tMitochondrial\tmembrane\tpotential\tchanges\tin\tthe\tcells\t(ΔΨm\twere\tevaluated\tusing\tcationic\tdye\tJC-1,\twhile\tBax,\tBcl- 2\texpression\tlevels\twith\tRT-PCR\tand\tcaspase-3\tactivity\twere\tanalyzed\tusing\ta\tkit.\tFor\tdetection\tof\tapoptotic\tactivity,\tan\tin\tsitu TUNEL\tassay\twas\tperformed. Results: When 98.3µM ε-VNF, 52.5µM VNC and the 11.25+15.8µM VNC+ε-VNF combination were compared with the control group,\tΔΨm\tchanges\tat\tthe\t6th\thour\twere\tfound\tto\tbe\t19.5%,\t5.5%,\t24.6%,\tand\t3.5%\t,\trespectively.\tThese\tfinding\tshow\tthat\tthe combination\tgroup\t(24.6%\tresulted\tin\tearly\tapoptosis\tof\tthe\tcell\tat\tthe\t6th\thour.\tBax\tmRNA\texpression\tincreased\tat\tthe\t24th hour in the VNC+ε-VNF group compared to control group (160%, and caspase-3 activation increased in the 1.25+15.8 µM[VNC+ε-VNF]\tgroup\tcompared\tto\tthe\tcontrol\tgroup\tat\tthe\t48th\thour.\tThe\tdetection\tof\tDNA\tfragments\tin\tHepG2\tcells\twithin 24\thours\tsuggests\tdirect\tapoptosis. Conclusion: These findings demonstrate that the doses administered to the VNC+ε-VNF combination group\twere\tlower than those\tadministered\tto\tgroups\tusing\tone\tagent\talone\t(e.g.\tVNC,\tthe\tresults\tof\twhich\treduce\tthe\tpossibility\tof\tadministering\ttoxic doses.

10'000 ton ALICE gets her UK-built "Brain"

CERN Multimedia

Maddock, Julia

2007-01-01

For one of the four LEP experiments, called ALICE, the process got a step closer last week when a crucial part of the 10'000-ton detector, the British-built Central Trigger Processor (CTP), was installed in the ALICE cavern, some 150 feet underground. (plus background information about ALICE) (2,5 pages)

Comportement en flexion des bétons fibrés sous chargement cyclique

Directory of Open Access Journals (Sweden)

Boulekbache Bensaid

2014-04-01

Full Text Available Ce papier présente les résultats d’une étude expérimentale sur le comportement en flexion des bétons de fibres métalliques. On étudie l’effet de la rhéologie du béton sur l’orientation des fibres et l’influence de l’orientation sur les propriétés mécaniques. La rigidité de l’ancrage des fibres étudiée par les essais cycliques est liée aux caractéristiques rhéologiques et mécaniques de la matrice. Les résultats montrent que la fluidité des bétons est un paramètre essentiel de l’orientation des fibres. Dès lors que l’on obtient une orientation dans le sens de l’efficacité mécanique, la résistance à la flexion est nettement améliorée.

COMPARATIVE EFFECTIVENESS OF ANIMAL MANURES ON SOIL ...

African Journals Online (AJOL)

Administrator

tons/ha and 13.4 tons/ha of poultry, goat and dairy cow manure will suffice the requirement of. 40 kg N/ha and 20 ..... supplementation with inorganic P sources. Rate. Manure ... organic and available forms of phosphorus in soils. Soil Science.

Besparen op kali-bemesting bij kropsla

NARCIS (Netherlands)

Neuvel, J.J.; Weijers, G.; Titulaer, H.H.H.

2000-01-01

Gegevens in bijgaande tabellen: 1) Opbrengst krop (ton/ha) bij 4 kalitoestanden en een gift van 240 kg/ha K20; 2) Opbrengst krop (ton/ha) bij een gift van 0,60, 120, 240, en 480 kg/ha K2O; 3) Kali-opname in de krop (kg K20 per ha); 4) K-opname van de krop (kg K2O per ha) bij 4 kalitiestanden en een

Characterization, Corrosion Resistance, and Cell Response of High-Velocity Flame-Sprayed HA and HA/TiO2 Coatings on 316L SS

Science.gov (United States)

Singh, Tejinder Pal; Singh, Harpreet; Singh, Hazoor

2012-09-01

The main aim of this study is to evaluate corrosion and biocompatibility behavior of thermal spray hydroxyapatite (HA) and hydroxyapatite/titania bond (HA/TiO2)-coated 316L stainless steel (316L SS). In HA/TiO2 coatings, TiO2 was used as a bond coat between HA top coat and 316L SS substrate. The coatings were characterized by x-ray diffraction and scanning electron microscopy/energy dispersive spectroscopy, and corrosion resistance determined for the uncoated substrate and the two coatings. The biological behavior was investigated by the cell culture studies using osteosarcoma cell line KHOS-NP (R-970-5). The corrosion resistance of the steel was found to increase after the deposition of the HA and HA/TiO2 bond coatings. Both HA, as well as, HA/TiO2 coatings exhibit excellent bond strength of 49 and 47 MPa, respectively. The cell culture studies showed that HA-coated 316L SS specimens appeared more biocompatible than the uncoated and HA/TiO2-coated 316L SS specimens.

Efeito da aplicação de calcário em estacas de Populus deltoides Bartr. ex Marsh cultivadas em vaso

Directory of Open Access Journals (Sweden)

Jean Gabriel Medeiros da Silva

2002-01-01

Full Text Available This work intended to study the behavior of Populus deltoides regarding its development when submitted to different doses of lime. The research was carried out in the Silviculture Tecnology Center, at Universidade Federal de Santa Maria, Santa Maria - RS. The experiment was constituted by forty eight (48 experimental units completely randomized, with six (06 treatments and eight repetitions (08. Each experimental unit was constituted by a vase of three liters containing only one shoot cutting of Populus deltoides. The treatments were constituted by five different doses (T2: 7 tons of lime/ha; T3: 14 tons of lime/ha; T4: 21 tons of lime/ha; T5: 29 tons of lime/ha; T6: 38 tons of lime/ha plus the testimony, determined with base in the soil analysis used in the experiment. The plants were evaluated, after 120 days of the plantation date, considering its growth in height, its diameter of the neck and its weigh dry of the aerial part. The best average were reached by the treatments without lime and with seven tons of lime for ha in all the parameters observed. The other treatments presented inferior averages, which do not possess significant difference to each other at the level of 5%, for all the observed parameters.

EFFECT OF MULCH AND MIXED CROPPING GRASS - LEGUME AT SALINE SOIL ON GROWTH, FORAGE YIELD AND NUTRITIONAL QUALITY OF GUINEA GRASS

Directory of Open Access Journals (Sweden)

F. Kusmiyati

2014-10-01

Full Text Available The research was conducted to evaluate the effect of mulch and mixed cropping grass – legume atsaline soil on growth, forage yield and nutritional quality of guinea grass. Saline soil used in thisresearch was classified into strongly saline soil with low soil fertility. The research was arrranged inrandomized complete block design with 3 blocks. The treatments were : M1 = guinea grassmonoculture, without mulch; M2 = guinea grass monoculture, 3 ton/ha mulch; M3 = guinea grassmonoculture, 6 ton/ha mulch, M4 = mixed cropping grass with Sesbania grandiflora, without mulch;M5 = mixed cropping grass with Sesbania grandiflora, 3 ton/ha mulch; M6 = mixed cropping grass withSesbania grandiflora, 6 ton/ha mulch. Data were analyzed using analysis of variance, then followed byDuncan's Multiple Range Test. The highest soil moisture content was achieved at mixed cropping grasslegumewith 6 ton/ha of mulch. The effect of mulch at saline soil significantly increased plant growth,forage yield and nutritional quality of guinea grass. Application of 3 ton/ha mulch increased plantgrowth, forage yield and nutritional quality of guinea grass. Plant growth, forage yield and nutritionalquality of guinea grass were not affected by monoculture or mixed cropping with Sesbania at saline soil.

A Field Experiment on Enhancement of Crop Yield by Rice Straw and Corn Stalk-Derived Biochar in Northern China

Directory of Open Access Journals (Sweden)

Yang Yang

2015-10-01

Full Text Available Biochar, a green way to deal with burning and burying biomass, has attracted more attention in recent years. To fill the gap of the effects of different biochar on crop yield in Northern China, the first field experiment was conducted in farmland located in Hebei Province. Biochars derived from two kinds of feedstocks (rice straw and corn stalk were added into an Inceptisols area with different dosages (1 ton/ha, 2 ton/ha or 4 ton/ha in April 2014. The crop yields were collected for corn, peanut, and sweet potato during one crop season from spring to autumn 2014, and the wheat from winter 2014 to summer 2015, respectively. The results showed biochar amendment could enhance yields, and biochar from rice straw showed a more positive effect on the yield of corn, peanut, and winter wheat than corn stalk biochar. The dosage of biochar of 2 ton/ha or 1 ton/ha could enhance the yield by 5%–15% and biochar of 4 ton/ha could increase the yield by about 20%. The properties of N/P/K, CEC, and pH of soils amended with biochar were not changed, while biochar effects could be related to improvement of soil water content.

Osteoblast interaction with laser cladded HA and SiO{sub 2}-HA coatings on Ti-6Al-4V

Energy Technology Data Exchange (ETDEWEB)

Yang Yuling [Department of Physics, Northeastern University, Shenyang 110004 (China); Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Serpersu, Kaan [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); He Wei, E-mail: whe5@utk.edu [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Paital, Sameer R. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Dahotre, Narendra B. [Department of Materials Science and Engineering, University of North Texas, Denton, TX 76207 (United States)

2011-12-01

In order to improve the bioactivity and biocompatibility of titanium endosseous implants, the morphology and composition of the surfaces were modified. Polished Ti-6Al-4V substrates were coated by a laser cladding process with different precursors: 100 wt.% HA and 25 wt.% SiO{sub 2}-HA. X-ray diffraction of the laser processed samples showed the presence of CaTiO{sub 3}, Ca{sub 3}(PO{sub 4}){sub 2}, and Ca{sub 2}SiO{sub 4} phases within the coatings. From in vitro studies, it was observed that compared to the unmodified substrate all laser cladded samples presented improved cellular interactions and bioactivity. The samples processed with 25 wt.% SiO{sub 2}-HA precursor showed a significantly higher HA precipitation after immersion in simulated body fluid than 100 wt.% HA precursor and titanium substrates. The in vitro biocompatibility of the laser cladded coatings and titanium substrate was investigated by culturing of mouse MC3T3-E1 pre-osteoblast cell line and analyzing the cell viability, cell proliferation, and cell morphology. A significantly higher cell attachment and proliferation rate were observed for both laser cladded 100 wt.% HA and 25 wt.% SiO{sub 2}-HA samples. Compared to 100 wt.% HA sample, 25 wt.% SiO{sub 2}-HA samples presented a slightly improved cellular interaction due to the addition of SiO{sub 2}. The staining of the actin filaments showed that the laser cladded samples induced a normal cytoskeleton and well-developed focal adhesion contacts. Scanning electron microscopic image of the cell cultured samples revealed better cell attachment and spreading for 25 wt.% SiO{sub 2}-HA and 100 wt.% HA coatings than titanium substrate. These results suggest that the laser cladding process improves the bioactivity and biocompatibility of titanium. The observed biological improvements are mainly due to the coating induced changes in surface chemistry and surface morphology. Highlights: {yields} Laser cladding of Ti alloys with bioceramics creates new

Applied molecular simulations over FER-, TON- and AEL-type zeolites

NARCIS (Netherlands)

Domokos, L.; Lefferts, Leonardus; Seshan, Kulathuiyer; Lercher, J.A.

2001-01-01

Interaction and transport of representative (un)saturated hydrocarbon molecules involved in the proposed reaction network of n-butene isomerization in zeolites FER, TON, and AEL have been studied by classic molecular modeling calculations. Docking of the guest molecules into the zeolite frameworks

Effect of Water-Glass Coating on HA and HA-TCP Samples for MSCs Adhesion, Proliferation, and Differentiation

Directory of Open Access Journals (Sweden)

Indu Bajpai

2016-01-01

Full Text Available Ca-P and silicon based materials have become very popular as bone tissue engineering materials. In this study, water-glass (also known as sodium silicate glass was coated on sintered hydroxyapatite (HA and HA-TCP (TCP stands for tricalcium phosphate samples and subsequently heat-treated at 600°C for 2 hrs. X-rays diffraction showed the presence of β- and α-TCP phases along with HA in the HA-TCP samples. Samples without coating, with water-glass coating, and heat-treated after water-glass coating were used to observe the adhesion and proliferation response of bone marrow derived-mesenchymal stem cells (MSCs. Cell culture was carried out for 4 hrs, 1 day, and 7 days. Interestingly, all samples showed similar response for cell adhesion and proliferation up to 7-day culture but fibronectin, E-cadherin, and osteogenic differentiation related genes (osteocalcin and osteopontin were significantly induced in heat-treated water-glass coated HA-TCP samples. A water-glass coating on Ca-P samples was not found to influence the cell proliferation response significantly but activated some extracellular matrix genes and induced osteogenic differentiation in the MSCs.

Püha õhtu seltskonnalaud / Kaire Nurk

Index Scriptorium Estoniae

Nurk, Kaire, 1960-

2005-01-01

Püha õhtusöömaaja teemast kunstis. Saksa kunstiajaloolase Horst Schwebeli poolt Leonardo da Vinci "Püha õhtusöömaaja" XX sajandi "töötlustes" välja toodud poliitilise agitatsiooni ja ühisest probleemist haaratud seltskonna kujutiste suunast. Laua kujutisest kunstis

APLIKASI FMA DAN PUPUK KANDANG TERHADAP PRODUKSI DAN KUALITAS RUMPUT GAJAH (Pennisetum purpureum Schum

Directory of Open Access Journals (Sweden)

- Khalidin

2014-06-01

Full Text Available The objectives of the study were to evaluate effects of arbuscular mycorrhiza fungi (AMF and manure on production and quality of the elephant grass. The experiment used a factorial randomized completely block design, consisting of two factors: AMF and manure, with three replications. AMF consisted of two levels, i.e. without AMF and with AMF 10 g hole-1, while manure consisted of 0, 15, 30, and 45 tons ha-1. Results showedthat the best combination for crude proteinandcrude fibergrass at age of 50 days after planting was found at without AMF and 15tons ha-1of animal manure. Manure of45 tonsha-1produced higher elephantgrass production than that of30tons ha-1, 15tons ha-1, andwithoutmanure.

Effect of humic acid (HA) on sulfonamide sorption by biochars

International Nuclear Information System (INIS)

Lian, Fei; Sun, Binbin; Chen, Xi; Zhu, Lingyan; Liu, Zhongqi; Xing, Baoshan

2015-01-01

Effect of quantity and fractionation of loaded humic acid (HA) on biochar sorption for sulfonamides was investigated. The HA was applied in two different modes, i.e. pre-coating and co-introduction with sorbate. In pre-coating mode, the polar fractions of HA tended to interact with low-temperature biochars via H-bonding, while the hydrophobic fractions were likely to be adsorbed by high-temperature biochars through hydrophobic and π-π interactions, leading to different composition and structure of the HA adlayers. The influences of HA fractionation on biochar sorption for sulfonamides varied significantly, depending on the nature of interaction between HA fraction and sorbate. Meanwhile, co-introduction of HA with sulfonamides revealed that the effect of HA on sulfonamide sorption was also dependent on HA concentration. These findings suggest that the amount and fractionation of adsorbed HA are tailored by the surface properties of underlying biochars, which differently affect the sorption for organic contaminants. - Highlights: • Effect of quantity and fractionation of coated HA on sorption of sulfonamides by BC was studied. • Fractionation of coated HA is tailored by surface properties of BC. • Roles of HA in BC sorption depend on interaction between HA adlayer and sorbate. • Roles of HA in sulfonamide sorption by BC also depend on HA aqueous concentration. - The quantity and fractionation of adsorbed HA play a major role in sulfonamide sorption by biochars

Hypertonic-induced lamin A/C synthesis and distribution to nucleoplasmic speckles is mediated by TonEBP/NFAT5 transcriptional activator

International Nuclear Information System (INIS)

Favale, Nicolas O.; Sterin Speziale, Norma B.; Fernandez Tome, Maria C.

2007-01-01

Lamin A/C is the most studied nucleoskeletal constituent. Lamin A/C expression indicates cell differentiation and is also a structural component of nuclear speckles, which are involved in gene expression regulation. Hypertonicity has been reported to induce renal epithelial cell differentiation and expression of TonEBP (NFAT5), a transcriptional activator of hypertonicity-induced gene transcription. In this paper, we investigate the effect of hypertonicity on lamin A/C expression in MDCK cells and the involvement of TonEBP. Hypertonicity increased lamin A/C expression and its distribution to nucleoplasm with speckled pattern. Microscopy showed codistribution of TonEBP and lamin A/C in nucleoplasmic speckles, and immunoprecipitation demonstrated their interaction. TonEBP silencing caused lamin A/C redistribution from nucleoplasmic speckles to the nuclear rim, followed by lamin decrease, thus showing that hypertonicity induces lamin A/C speckles through a TonEBP-dependent mechanism. We suggest that lamin A/C speckles could serve TonEBP as scaffold thus favoring its role in hypertonicity

Study on the blackbird (Agelaius ruficapillus Viellot- Emberizidae, Aves) in the rice production areas of Southern Rio Grande do Sul, Brazil : basis for a population control management program

NARCIS (Netherlands)

Silva, da J.J.C.

1999-01-01

Rice is one of the main components of the Brazilian diet. The State of Rio Grande do Sul produces approximately 4,6 millions tons per year - more than 54% of total Brazilian rice production. The average production in Southern Brazil is 5,2 tons per ha, with yields of 10 tons per ha being

Twitching motility and biofilm formation are associated with tonB1 in Xylella fastidiosa

OpenAIRE

Cursino, Luciana; Li, Yaxin; Zaini, Paulo A.; De La Fuente, Leonardo; Hoch, Harvey C.; Burr, Thomas J.

2017-01-01

A mutation in the Xylella fastidiosa tonB1 gene resulted in loss of twitching motility and in significantly less biofilm formation as compared with a wild type. The altered motility and biofilm phenotypes were restored by complementation with a functional copy of the gene. The mutation affected virulence as measured by Pierce's disease symptoms on grapevines. The role of TonB1 in twitching and biofilm formation appears to be independent of the characteristic iron-uptake function of this prote...

Imaging of Homeostatic, Neoplastic, and Injured Tissues by HA-Based Probes

Science.gov (United States)

Veiseh, Mandana; Breadner, Daniel; Ma, Jenny; Akentieva, Natalia; Savani, Rashmin C; Harrison, Rene; Mikilus, David; Collis, Lisa; Gustafson, Stefan; Lee, Ting-Yim; Koropatnick, James; Luyt, Leonard G.; Bissell, Mina J.; Turley, Eva A.

2013-01-01

An increase in hyaluronan (HA) synthesis, cellular uptake, and metabolism occurs during the remodeling of tissue microenvironments following injury and during disease processes such as cancer. We hypothesized that multimodality HA-based probes selectively target and detectably accumulate at sites of high HA metabolism, thus providing a flexible imaging strategy for monitoring disease and repair processes. Kinetic analyses confirmed favorable available serum levels of the probe following intravenous (i.v.) or subcutaneous (s.c.) injection. Nuclear (technetium-HA, 99mTc-HA, and iodine-HA, 125I-HA), optical (fluorescent Texas Red-HA, TR-HA), and magnetic resonance (gadolinium-HA, Gd-HA) probes imaged liver (99mTc-HA), breast cancer cells/xenografts (TR-HA, Gd-HA), and vascular injury (125I-HA, TR-HA). Targeting of HA probes to these sites appeared to result from selective HA receptor-dependent localization. Our results suggest that HA-based probes, which do not require polysaccharide backbone modification to achieve favorable half-life and distribution, can detect elevated HA metabolism in homeostatic, injured, and diseased tissues. PMID:22066590

Effect of fusarium oxysporum f. sp. lycopersici on the degradation of humic acid associated with Cu, Pb, and Ni: an in vitro study

Energy Technology Data Exchange (ETDEWEB)

Corrales Escobosa, Alma Rosa; Gutierrez Corona, J.F. [University of Guanajuato, Department of Biology, Guanajuato (Mexico); Landero Figueroa, Julio Alberto; Wrobel, Katarzyna; Wrobel, Kazimierz [University of Guanajuato, Department of Chemistry, Guanajuato (Mexico)

2009-08-15

The intent of this work was to gain further insight on the fungus-assisted degradation/solubilization of humic acid and the related changes in metal-binding profiles. In the experimental design, Aldrich reagent humic acid (HA) or HA enriched with Cu, Pb, and Ni (HA(Me)) was added to Fusarium oxysporum f. sp. lycopersici cultures in vitro. The cultures were supplied by different carbon- and nitrogen-containing nutrients (glucose, Glc, or glutamate, Glu and ammonium, NH{sub 4}{sup +}, or nitrate, NO{sub 3}{sup -}, ions, respectively) in order to examine their possible effect on HA and HA(Me) decomposition. During the first 48 h of fungus growth, gradual acidification to pH 2 was observed in medium containing Glc+NH{sub 4}{sup +}, while for other cultures, alkalinization to pH 9 occurred and then, the above conditions were stable up to at least 200 h. Size exclusion chromatography (SEC) with UV/Vis detection showed progressive degradation and solubilization of both HA and HA(Me) with the increasing time of fungus growth. However, the molecular mass distributions of HA-related soluble species were different in the presence of metals (HA(Me)) as referred to HA and were also influenced by the composition of growth medium. The solubilization of Pb, Cu, and Ni and their association with HA molecular mass fractions were studied using inductively coupled plasma mass spectrometry (ICP-MS) detection. Under acidic conditions, relatively high concentrations of low-molecular-mass metallic species were found in culture supernatants, while in alkaline media, metal solubilization was generally poorer. In contrast to low pH culture, SEC-ICP-MS results obtained in alkaline supernatants indicated metal binding to degradation products of humic substances of MM>5 kDa. In summary, the results of this study suggest that fungus-assisted degradation of HA and HA(Me) might be controlled using appropriate N- and C-sources required for fungus growth, which in turn would affect molecular mass

Effect of Fusarium oxysporum f. sp. lycopersici on the degradation of humic acid associated with Cu, Pb, and Ni: an in vitro study.

Science.gov (United States)

Corrales Escobosa, Alma Rosa; Landero Figueroa, Julio Alberto; Gutiérrez Corona, J Félix; Wrobel, Katarzyna; Wrobel, Kazimierz

2009-08-01

The intent of this work was to gain further insight on the fungus-assisted degradation/solubilization of humic acid and the related changes in metal-binding profiles. In the experimental design, Aldrich reagent humic acid (HA) or HA enriched with Cu, Pb, and Ni (HA(Me)) was added to Fusarium oxysporum f. sp. lycopersici cultures in vitro. The cultures were supplied by different carbon- and nitrogen-containing nutrients (glucose, Glc, or glutamate, Glu and ammonium, NH4+, or nitrate, NO3-, ions, respectively) in order to examine their possible effect on HA and HA(Me) decomposition. During the first 48 h of fungus growth, gradual acidification to pH 2 was observed in medium containing Glc + NH4+, while for other cultures, alkalinization to pH 9 occurred and then, the above conditions were stable up to at least 200 h. Size exclusion chromatography (SEC) with UV/Vis detection showed progressive degradation and solubilization of both HA and HA(Me) with the increasing time of fungus growth. However, the molecular mass distributions of HA-related soluble species were different in the presence of metals (HA(Me)) as referred to HA and were also influenced by the composition of growth medium. The solubilization of Pb, Cu, and Ni and their association with HA molecular mass fractions were studied using inductively coupled plasma mass spectrometry (ICP-MS) detection. Under acidic conditions, relatively high concentrations of low-molecular-mass metallic species were found in culture supernatants, while in alkaline media, metal solubilization was generally poorer. In contrast to low pH culture, SEC-ICP-MS results obtained in alkaline supernatants indicated metal binding to degradation products of humic substances of MM > 5 kDa. In summary, the results of this study suggest that fungus-assisted degradation of HA and HA(Me) might be controlled using appropriate N- and C- sources required for fungus growth, which in turn would affect molecular mass distribution of soluble metallic

Combustion characteristics and NO formation for biomass blends in a 35-ton-per-hour travelling grate utility boiler.

Science.gov (United States)

Li, Zhengqi; Zhao, Wei; Li, Ruiyang; Wang, Zhenwang; Li, Yuan; Zhao, Guangbo

2009-04-01

Measurements were taken for a 35-ton-per-hour biomass-fired travelling grate boiler. Local mean concentrations of O(2), CO, SO(2) and NO gas species and gas temperatures were determined in the region above the grate. For a 28-ton-per-hour load, the mass ratios of biomass fly ash and boiler slag were 42% and 58%, the boiler efficiency was 81.56%, and the concentrations of NO(x) and SO(2) at 6% O(2) were 257 and 84 mg/m(3). For an 18-ton-per-hour load, the fuel burning zone was nearer to the inlet than it was for the 28-ton-per-hour load, and the contents of CO and NO in the fuel burning zone above the grate were lower.

The effect of mixed liming and NPK fertilizer to yield of some rice varieties on new openings of acid sulfate tidal swamp land

Science.gov (United States)

Akhmad, A.; Dewi, W. S.; Sagiman, S.; Suntoro

2018-03-01

The strategies to meet the staple food needs in Indonesia is to open new paddy fields in the sub-optimal land. The research aims to get adaptive rice varieties with the highest yield on new openings of the acid sulfate tidal swamp applying mixed liming and NPK fertilizer. The experiment was conducted in a greenhouse at the Faculty of Agriculture, Tanjungpura University, Pontianak. The trials used a factorial completely randomized block design consisting of two factors. The first factor is a mixture of dolomite with NPK fertilizer, consisting of 3 levels (1 ton/ha dolomite and 60 kg/ha NPK; 2 ton/ha dolomite and 90 kg/ha of NPK, and 3 ton/ha dolomite and 120 kg/ha NPK). The second factor is rice varieties, consisting of 6 levels (Ciherang, Situ Bagendit, Inpara, Mira, Si Randah and Ringkak Janggut). Each treatment replicated four times. The results showed that the application of a mixture of 3 ton/ha dolomite and 120 kg/ha of NPK fertilizer showed the best results to improve rice yield on new opening of the acid sulfate tidal swap. Local rice varieties, Ringkak Janggut, applied 3 ton/ha dolomite and 120 kg/ha NPK fertilizer showed the best result of 1000 seed weight, i.e., 28.19 g, and total grain amount per panicle is 110.75 grains, with the lowest number of empty grains. Local rice varieties Ringkak Janggut potential to be developed as superior varieties on new opening acid sulfate tidal swamps by applying liming and fertilizer.

Constructing experimental devices for half-ton synthesis of gadolinium-loaded liquid scintillator and its performance

Science.gov (United States)

Park, Young Seo; Jang, Yeong Min; Joo, Kyung Kwang

2018-04-01

This paper describes in brief features of various experimental devices constructed for half-ton synthesis of gadolinium(Gd)-loaded liquid scintillator (GdLS) and also includes the performances and detailed chemical and physical results of a 0.5% high-concentration GdLS. Various feasibility studies on useful apparatus used for loading Gd into solvents have been carried out. The transmittance, Gd concentration, density, light yield, and moisture content were measured for quality control. We show that with the help of adequate automated experimental devices and tools, it is possible to perform ton scale synthesis of GdLS at moderate laboratory scale without difficulty. The synthesized GdLS was satisfactory to meet chemical, optical, and physical properties and various safety requirements. These synthesizing devices can be expanded into massive scale next-generation neutrino experiments of several hundred tons.

Biosolids conditioning and the availability of Cu and Zn for rice Condicionamento de biossólidos e a disponibilidade de Cu e Zn para arroz

Directory of Open Access Journals (Sweden)

Adriana Marlene Moreno Pires

2003-02-01

Full Text Available Sewage treatment process is a factor to be considered for biosolid use in agriculture. The greatest sewage treatment facility of São Paulo State (Barueri/SP altered in the year 2000 of its sludge treatment. The addition of ferric chloride and calcium oxide was substituted by the addition of polymers. This change can modify heavy metal phytoavailability. A green house experiment, using 2 soils treated with biosolids (three with and one without polymers with and without polymers was performed to evaluate Cu and Zn phytoavailability using rice (Oryza sativa L. as test plant. Three kilograms of two soils (Haphorthox abd Hapludox were placed in pots and the equivalent to 50 Mg ha-1 (dry basis of biosolid was added and incorporated. The statistical design adopted was completely randomized experiment, with five treatments (control plus four different biossolids each soil and four replications. Soil pH before and after harvesting, Cu and Zn concentrations in shoot were evaluated. Tukey (5% was used to compare the results. DTPA, HCl 0.1 mol L-1 and Mehlich 3 were used to estimate soil available Cu and Zn. Amounts extracted were correlated to those presented in rice shoot, to evaluate the efficiency of predicting Cu and Zn phytoavailabilities. Biosolids with polymers presented higher Cu and Zn phytoavailabilities, possibly due to the lower pH of these residues. In this case soil presented lowest values of pH and plant shoot had highest. All extractants were representative of Cu and Zn availability to rice plants.O processo gerador do biossólido é um fator a ser considerado na avaliação do uso agrícola deste resíduo. Em 2000, a adição de cloreto férrico+cal virgem durante o tratamento do esgoto foi substituída pela adição de polieletrólitos na maior Estação de Tratamento de Esgotos de São Paulo (Barueri, o que pode gerar mudanças na fitodisponibilidade dos metais pesados. Um experimento em casa de vegetação, com dois solos (Latossolo

CARBON SEQUESTRATION IN PASTURES WITH TREES, TREELESS PASTURES AND DECIDUOUS FOREST FROM HUATUSCO, VERACRUZ

Directory of Open Access Journals (Sweden)

José Antonio Torres-Rivera

2011-11-01

Full Text Available It was compared the amount of carbon (C sequestered in a pasture with trees (P+Ar and in conventional treeless pastures (P and deciduous forest (BC, typical of the region of Huatusco, Veracruz, Mexico. Total C sequestered by the systems evaluated was 49.9, 63.0 and 469.8 ton ha-1 for P, P+Ar and BC, respectively. The system with the highest amount of C sequestered was BC, with almost equal proportions in the aerial (268.4 ton ha-1 and belowground parts (201.4 ton ha-1. The amount of C sequestered in the livestock systems represented about one tenth of that sequestered in BC, being higher the proportion obtained in P+Ar (13.4 % compared to P (10.6 %. In both livestock systems, a significantly greater amount of C was sequestered in the soil organic matter than in the aerial biomass, with 59.7 and 3.29 ton ha-1 in P+Ar, and with 48.2 and 1.78 ton ha-1 in P, respectively. It is expected that as trees of the P+Ar system gain volume, C sequestration will increase, especially in the aerial biomass.

Responsible for 45 000 tons CO2 emissions

International Nuclear Information System (INIS)

Nedrelid, Ola N.

2006-01-01

Waste combustion has much better tax conditions in Sweden compared to Norway. Today waste is being transported from Norway to Sweden, resulting in a 45 000 ton emission of CO 2 every year, when the waste could have remained in Norway, utilized as regained energy in district heating. The tax regime, however, does not provide the conditions for a profitable use of the waste in Norway. The district heating association is disappointed with the new government's proposed fiscal budget, which only worsens the competitive situation for Norway handling its own waste (ml)

Electrospun Porous PDLLA Fiber Membrane Coated with nHA

Directory of Open Access Journals (Sweden)

Linhui Qiang

2018-05-01

Full Text Available Porous poly- D, L-lactic acid (PDLLA electrospinning fiber membrane was prepared, and nano-hydroxyapatite (nHA was adsorbed and wrapped into it during the unique shrinking process of the PDLLA fiber membrane to fabricate the PDLLA/nHA composite membrane scaffold for tissue engineering. Compare with the composite fibers prepared by blend electrospinning, most of nHA particles are observed to distribute on the surface of new type composite fibers, which could significantly improve the water wettability and induce the cellular adherence. FTIR analysis indicated that the PDLLA/nHA composite fibrous membrane was formed by physical adsorption. The combination was probed by scanning electron microscope, thermo-gravimetric, water contact angle and mechanical property analysis. It was proved that the nHA particles’ content and distribution, surface wettability, modulus and tensile strength of PDLLA/nHA composite fibrous membrane were influenced by the concentration of nHA dispersion and pores on the PDLLA fiber surface. The 10.6 wt % PDLLA/nHA composite fibrous membrane exhibits a more balanced tensile strength (3.28 MPa and surface wettability (with a water contact angle of 0° of the composite mats. Scanning electron microscope and confocal laser scanning microscopy images of chondrocyte proliferation further showed that the composite scaffold is non-toxic. The adherence and proliferation of chondrocytes on the 10.6 wt % PDLLA/nHA fibrous membrane was significantly improved, compared with PDLLA mat. The 10.6 wt % PDLLA/nHA composite fibrous membrane has potential application value as scaffold material in tissue engineering.

Optical flare observed in the flaring gamma-ray blazar Ton 599

Science.gov (United States)

Pursimo, Tapio; Sagues, Ana; Telting, John; Ojha, Roopesh

2017-11-01

We report optical photometry of the flat spectrum radio quasar Ton 599, obtained with the 2.56m Nordic Optical Telescope in La Palma, to look for any enhanced optical activity associated with a recent flare in the daily averaged gamma-ray flux (ATel#10931, ATel#10937).

Preparation of bioactive porous HA/PCL composite scaffolds

Energy Technology Data Exchange (ETDEWEB)

Zhao, J.; Guo, L.Y.; Yang, X.B. [Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031 (China); Weng, J. [Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031 (China)], E-mail: jweng@swjtu.cn

2008-12-30

Porous hydroxyapatite (HA) bioceramic scaffold has been widely attracted the attention to act as a three-dimensional (3D) template for cell adhesion, proliferation, differentiation and thus promoting bone and cartilage regeneration because of its osteoinduction. However, the porous bioceramic scaffold is fragile so that it is not suitable to be applied in clinic for bone repair or replacement. Therefore, it is significant to improve the mechanical property of porous HA bioceramics while the interconnected structure is maintained for tissue ingrowth in vivo. In the present research, a porous composite scaffold composed of HA scaffold and polycaprolactone (PCL) lining was fabricated by the method of polymer impregnating to produce HA scaffold coated with PCL lining. Subsequently, the composite scaffolds were deposited with biomimetic coating for improving the bioactivity. The HA/PCL composite scaffolds with improved mechanical property and bioactivity is expected to be a promising bone substitute in tissue engineering applications.

Preparation of bioactive porous HA/PCL composite scaffolds

International Nuclear Information System (INIS)

Zhao, J.; Guo, L.Y.; Yang, X.B.; Weng, J.

2008-01-01

Porous hydroxyapatite (HA) bioceramic scaffold has been widely attracted the attention to act as a three-dimensional (3D) template for cell adhesion, proliferation, differentiation and thus promoting bone and cartilage regeneration because of its osteoinduction. However, the porous bioceramic scaffold is fragile so that it is not suitable to be applied in clinic for bone repair or replacement. Therefore, it is significant to improve the mechanical property of porous HA bioceramics while the interconnected structure is maintained for tissue ingrowth in vivo. In the present research, a porous composite scaffold composed of HA scaffold and polycaprolactone (PCL) lining was fabricated by the method of polymer impregnating to produce HA scaffold coated with PCL lining. Subsequently, the composite scaffolds were deposited with biomimetic coating for improving the bioactivity. The HA/PCL composite scaffolds with improved mechanical property and bioactivity is expected to be a promising bone substitute in tissue engineering applications

2016 Billion-ton report: Advancing domestic resources for a thriving bioeconomy, Volume 1: Economic availability of feedstock

Science.gov (United States)

M.H. Langholtz; B.J. Stokes; L.M. Eaton

2016-01-01

This product builds on previous efforts, namely the 2005 Billion-Ton Study (BTS) and the 2011 U.S. Billion-Ton Update (BT2).With each report, greater perspective is gained on the potential of biomass resources to contribute to a national energy strategy. Similarly, each successive report introduces new questions regarding commercialization challenges. BTS quantified...

Evaluaciones microcalorimétricas no-isotermas en aleaciones de Cu-9Ni-5,5Sn templadas y deformadas en frío

Directory of Open Access Journals (Sweden)

Donoso, E.

2012-02-01

Full Text Available The thermal aging of both a quenched and a cold rolled homogeneous supersaturated Cu-9 % wt Ni-5.5 wt % Sn alloy has been studied from differential scanning calorimetry (DSC and microhardness measurements. An increase of the hardness during the aging of the quenched sample, because of the precipitation of a Υ´ phase, takes place. On the contrary, no hardness increase was observed during the aging of the cold rolled sample. A theoretical analysis of the enthalpy determined from the first DSC exothermic peak suggests that a segregation of the solute towards the dislocations occurs during the aging of the cold rolled alloy. The values of the n Avrami-Erofeev coefficients estimated from the kinetic analysis supports the above interpretations.

Se ha estudiado por calorimetría diferencial de barrido (DSC y medidas de microdureza, el comportamiento durante el recocido de una aleación Cu-9 % Ni-5,5 % Sn templada y deformada por laminación en frio al 50 %, respectivamente. Se ha concluido que durante el tratamiento térmico de la muestra templada tiene lugar un aumento de la microdureza atribuido a la precipitación de una fase Υ´ de composición (Cu_xNi_1x3Sn. Sin embargo, no se ha observado un aumento de dureza durante el recocido de la muestra deformada en frío. Este comportamiento se ha interpretado considerando que las dislocaciones generadas por la laminación en frío, favorecen la segregación de soluto (níquel y estaño hacia las dislocaciones en lugar de la formación de la fase (Cu_xNi1-x₃Sn. Tanto el análisis teórico de la entalpía determinada para esta etapa como los valores de los coeficientes n de Avrami-Erofeev determinados a partir de un análisis cinético apoyan esta interpretación.

U.S. Billion-Ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry

Energy Technology Data Exchange (ETDEWEB)

Downing, Mark [ORNL; Eaton, Laurence M [ORNL; Graham, Robin Lambert [ORNL; Langholtz, Matthew H [ORNL; Perlack, Robert D [ORNL; Turhollow Jr, Anthony F [ORNL; Stokes, Bryce [Navarro Research & Engineering; Brandt, Craig C [ORNL

2011-08-01

The report, Biomass as Feedstock for a Bioenergy and Bioproducts Industry: The Technical Feasibility of a Billion-Ton Annual Supply (generally referred to as the Billion-Ton Study or 2005 BTS), was an estimate of 'potential' biomass based on numerous assumptions about current and future inventory, production capacity, availability, and technology. The analysis was made to determine if conterminous U.S. agriculture and forestry resources had the capability to produce at least one billion dry tons of sustainable biomass annually to displace 30% or more of the nation's present petroleum consumption. An effort was made to use conservative estimates to assure confidence in having sufficient supply to reach the goal. The potential biomass was projected to be reasonably available around mid-century when large-scale biorefineries are likely to exist. The study emphasized primary sources of forest- and agriculture-derived biomass, such as logging residues, fuel treatment thinnings, crop residues, and perennially grown grasses and trees. These primary sources have the greatest potential to supply large, reliable, and sustainable quantities of biomass. While the primary sources were emphasized, estimates of secondary residue and tertiary waste resources of biomass were also provided. The original Billion-Ton Resource Assessment, published in 2005, was divided into two parts-forest-derived resources and agriculture-derived resources. The forest resources included residues produced during the harvesting of merchantable timber, forest residues, and small-diameter trees that could become available through initiatives to reduce fire hazards and improve forest health; forest residues from land conversion; fuelwood extracted from forests; residues generated at primary forest product processing mills; and urban wood wastes, municipal solid wastes (MSW), and construction and demolition (C&D) debris. For these forest resources, only residues, wastes, and small

Preparation and characterization of bio-composite PEEK/nHA

Science.gov (United States)

Jin, Y. S.; Bian, C. C.; Zhang, Z. Q.; Zhao, Y.; Yang, L.

2017-01-01

PEEK/nHA composite material, with excellent mechanical property as polyetheretherketone (PEEK) and biological activity as hydroxyapatite (HA), has attracted wide attention of medical experts and materials science experts. The addition of hydroxyapatite was the decisive factor for biological activity in PEEK/nHA composite. In this paper, acicular nanohydroxyapatite was prepared by chemical precipitation method with Ca(NO3)2, (NH4)2HPO4 as raw material; PEEK/nHA composite was prepared by solution blending and vacuum sintering method. The composite was characterized with FT-IR, XRD, DSC, TG and mechanical property test. Results showed that the composite has good thermal stability and compressive property when the mass ratio of PEEK to nHA is 10:3; and high nHA content can improve the biological activity of the composite, which can meet the basic requirements for bone tissue engineering scaffold.

Immunomodulatory Effects of Hemagglutinin- (HA- Modified A20 B-Cell Lymphoma Expanded as a Brain Tumor on Adoptively Transferred HA-Specific CD4+ T Cells

Directory of Open Access Journals (Sweden)

Valentin P. Shichkin

2014-01-01

Full Text Available Previously, the mouse A20 B-cell lymphoma engineered to express hemagglutinin (HA antigen (A20HA was used as a systemic tumor model. In this work, we used the A20HA cells as a brain tumor. HA-specific CD4+ T cells were transferred intravenously in a tail vein 5 days after A20HA intracranial inoculation and analyzed on days 2, 9, and 16 after the adoptive transfer by different methods. The transferred cells demonstrated state of activation as early as day 2 after the adoptive transfer and most the of viable HA-specific cells became anergic on day 16. Additionally, symptoms of systemic immunosuppression were observed in mice with massive brain tumors at a late stage of the brain tumor progression (days 20–24 after the A20HA inoculation. Despite that, a deal of HA-specific CD4+ T cells kept the functional activity even at the late stage of A20HA tumor growth. The activated HA-specific CD4+ T cells were found also in the brain of brain-tumor-bearing mice. These cells were still responding to reactivation with HA-peptide in vitro. Our data support an idea about sufficient role of both the tumor-specific and -nonspecific mechanisms inducing immunosuppression in cancer patients.

46 CFR 25.25-17 - Survival craft requirements for uninspected passenger vessels of at least 100 gross tons.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft requirements for uninspected passenger... Survival craft requirements for uninspected passenger vessels of at least 100 gross tons. (a) Each uninspected passenger vessel of at least 100 gross tons must have adequate survival craft with enough capacity...

Laser treatment of plasma sprayed HA coatings

NARCIS (Netherlands)

Khor, KA; Vreeling, A; Dong, ZL; Cheang, P

1999-01-01

Laser treatment was conducted on plasma sprayed hydroxyapatite (HA) coatings using a Nd-YAG pulse laser. Various laser parameters were investigated. The results showed that the HA surface melted when an energy level of greater than or equal to 2 J and a spot size of 2 mm was employed during

Hyaluronan (HA) interacting proteins RHAMM and hyaluronidase impact prostate cancer cell behavior and invadopodia formation in 3D HA-based hydrogels.

Science.gov (United States)

Gurski, Lisa A; Xu, Xian; Labrada, Lyana N; Nguyen, Ngoc T; Xiao, Longxi; van Golen, Kenneth L; Jia, Xinqiao; Farach-Carson, Mary C

2012-01-01

To study the individual functions of hyaluronan interacting proteins in prostate cancer (PCa) motility through connective tissues, we developed a novel three-dimensional (3D) hyaluronic acid (HA) hydrogel assay that provides a flexible, quantifiable, and physiologically relevant alternative to current methods. Invasion in this system reflects the prevalence of HA in connective tissues and its role in the promotion of cancer cell motility and tissue invasion, making the system ideal to study invasion through bone marrow or other HA-rich connective tissues. The bio-compatible cross-linking process we used allows for direct encapsulation of cancer cells within the gel where they adopt a distinct, cluster-like morphology. Metastatic PCa cells in these hydrogels develop fingerlike structures, "invadopodia", consistent with their invasive properties. The number of invadopodia, as well as cluster size, shape, and convergence, can provide a quantifiable measure of invasive potential. Among candidate hyaluronan interacting proteins that could be responsible for the behavior we observed, we found that culture in the HA hydrogel triggers invasive PCa cells to differentially express and localize receptor for hyaluronan mediated motility (RHAMM)/CD168 which, in the absence of CD44, appears to contribute to PCa motility and invasion by interacting with the HA hydrogel components. PCa cell invasion through the HA hydrogel also was found to depend on the activity of hyaluronidases. Studies shown here reveal that while hyaluronidase activity is necessary for invadopodia and inter-connecting cluster formation, activity alone is not sufficient for acquisition of invasiveness to occur. We therefore suggest that development of invasive behavior in 3D HA-based systems requires development of additional cellular features, such as activation of motility associated pathways that regulate formation of invadopodia. Thus, we report development of a 3D system amenable to dissection of

TNF-α promotes nuclear enrichment of the transcription factor TonEBP/NFAT5 to selectively control inflammatory but not osmoregulatory responses in nucleus pulposus cells.

Science.gov (United States)

Johnson, Zariel I; Doolittle, Alexandra C; Snuggs, Joseph W; Shapiro, Irving M; Le Maitre, Christine L; Risbud, Makarand V

2017-10-20

Intervertebral disc degeneration (IDD) causes chronic back pain and is linked to production of proinflammatory molecules by nucleus pulposus (NP) and other disc cells. Activation of tonicity-responsive enhancer-binding protein (TonEBP)/NFAT5 by non-osmotic stimuli, including proinflammatory molecules, occurs in cells involved in immune response. However, whether inflammatory stimuli activate TonEBP in NP cells and whether TonEBP controls inflammation during IDD is unknown. We show that TNF-α, but not IL-1β or LPS, promoted nuclear enrichment of TonEBP protein. However, TNF-α-mediated activation of TonEBP did not cause induction of osmoregulatory genes. RNA sequencing showed that 8.5% of TNF-α transcriptional responses were TonEBP-dependent and identified genes regulated by both TNF-α and TonEBP. These genes were over-enriched in pathways and diseases related to inflammatory response and inhibition of matrix metalloproteases. Based on RNA-sequencing results, we further investigated regulation of novel TonEBP targets CXCL1 , CXCL2 , and CXCL3 TonEBP acted synergistically with TNF-α and LPS to induce CXCL1 -proximal promoter activity. Interestingly, this regulation required a highly conserved NF-κB-binding site but not a predicted TonE, suggesting cross-talk between these two members of the Rel family. Finally, analysis of human NP tissue showed that TonEBP expression correlated with canonical osmoregulatory targets TauT/SLC6A6 , SMIT/SLC5A3 , and AR/AKR1B1 , supporting in vitro findings that the inflammatory milieu during IDD does not interfere with TonEBP osmoregulation. In summary, whereas TonEBP participates in the proinflammatory response to TNF-α, therapeutic strategies targeting this transcription factor for treatment of disc disease must spare osmoprotective, prosurvival, and matrix homeostatic activities. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Response to growth and production of green beans (Vigna radiata L.) in various cropping spots and fertilizer provision of layer chickens

Science.gov (United States)

Sitinjak, L.; Purba, E.

2018-02-01

Agroecology affecting plant growth can be influenced by factors such as plant spacing and growing media. This study aims to determine the effect of plant spacing and chicken manure on the growth and production of green beans. Plants were planted at three spacing plants (20cm x 20cm, 20cm x 30cm, and 20cm x 40cm) while manure was applied at 3.75, 7.50 and 11.25 ton/ha and without manure as a comparison. The treatments were arranged in a randomized complete block design with three replicates. The result showed that the highest diameter of stem was resulted from the application of 11.25 ton/ha of manure combined with the planting space of 20cm x 40 cm. Similarly, the highest number of branch of stem we found at the plot where chicken manure of 11.25 ton/ha with planting space of 20cm x 30cm. The highest production (4,944.4 kg/ha) was resulted from 7.50 ton/ha manure with combined with planting space of 20cm x 40cm. There was an interaction between the treatment of manure and the planting space of soybean. The production of green bean was 24% higher in 7.50 ton/ha manure combined with 20cm x 40cm planting space compared to no manure (control).

Síntesis y deposición de semiconductores basados en Cu2ZnSn(S,Se)4 sobre laminados cerámicos para aplicaciones fotovoltaicas

OpenAIRE

Calvet Roures, Ivan

2018-01-01

En la presente tesis doctoral se ha estudiado la metodología de obtención de laminados cerámicos fotovoltaicos basados en la tecnología de capa fina. Se ha sintetizado el material inorgánico Cu2ZnSn(S,Se)4, el cual cristaliza en la estructura kesterita, como absorbedor del dispositivo. Como soporte de los dispositivos fotovoltaicos se han empleado laminados de gres porcelánico esmaltados. Sobre la superficie de estos sustratos se ha depositado Mo metálico como contacto inferior del dispositiv...

Sterilisation effect study on granular hydroxyapatite (HA)

International Nuclear Information System (INIS)

Saidu, M.F.; Mashita, M.; Khadijah, K.; Fazan, F.; Khalid, K.A.

2004-01-01

Hydroxyapatite (HA) is a calcium phosphate bio ceramic that has been shown by many authors to be biocompatible with bioactive properties. It is widely accepted as the best synthetic material available for surgical use as a bone graft substitute. HA granules produced by Amerce-SIRIM from local materials underwent 5 types of sterilisation techniques with different ageing periods. Samples were tested for chemical and phase composition and microbial contamination before and after being sterilised. From the microbiological tests done, none of the unsterilised positive control yielded a positive culture. Results from X-Ray diffraction studies found that all the sterilisation techniques did not chemically degrade or structurally change the HA granules significantly. (Author)

Un nouveau béton auto-cicatrisant grâce à l’incorporation de bactéries

NARCIS (Netherlands)

Wiktor, V.; Jonkers, H.M.

2011-01-01

La formation d’un réseau continu de fissures contribue à l’augmentation de la perméabilité du béton, réduisant ainsi de manière importante sa résistance à l’attaque d’agents agressifs dissous dans l’eau. Afin d’augmenter la capacité de cicatrisation autogène du béton, certains agents cicatrisants

Deuterium transport in Cu, CuCrZr, and Cu/Be

Science.gov (United States)

Anderl, R. A.; Hankins, M. R.; Longhurst, G. R.; Pawelko, R. J.

This paper presents the results of deuterium implantation/permeation experiments and TMAP4 simulations for a CuCrZr alloy, for OFHC-Cu and for a Cu/Be bi-layered structure at temperatures from 700 to 800 K. Experiments used a mass-analyzed, 3-keV D 3+ ion beam with particle flux densities of 5 × 10 19 to 7 × 10 19 D/m 2 s. Effective diffusivities and surface molecular recombination coefficients were derived giving Arrhenius pre-exponentials and activation energies for each material: CuCrZr alloy, (2.0 × 10 -2 m 2/s, 1.2 eV) for diffusivity and (2.9 × x10 -14 m 4/s, 1.92 eV) for surface molecular recombination coefficients; OFHC Cu, (2.1 × 10 -6 m 2/s, 0.52 eV) for diffusivity and (9.1 × 10 -18 m 4/s, 0.99 eV) for surface molecular recombination coefficients. TMAP4 simulation of permeation data measured for a Cu/Be bi-layer sample was achieved using a four-layer structure (Cu/BeO interface/Be/BeO back surface) and recommended values for diffusivity and solubility in Be, BeO and Cu.

Diabetes\tand\tdepression:\tA\treview\twith\tspecial\tfocus\ton\tIndia

Directory of Open Access Journals (Sweden)

Megha\tThakur

2015-10-01

Full Text Available Diabetes,\ta\tpsychologically\tchallenging\tcondition for the\tpatients\tand their care givers, has been found to be a significant risk factor for depression. Depression\tmay\tbe\ta\tcritical\tbarrier\tto\teffective\tdiabetes\tmanagement.\tThe accompanying\tfatigue\tremarkably\tlowers\tthe\tmotivation\tfor\tself-care,\toften leading to lowered physical and emotion well-being, poor markers of diabetes control, poor adherence to medication, and increased mortality among individuals with diabetes. A very small proportion of the diabetes patients\twith\tdepression\tget\tdiagnosed,\tand\tfurthermore,\tonly\ta\thandful\tof the ones diagnosed get treated for depression. Despite the fact that 80 percent\tof\tthe\tpeople\twith\ttype\t2\tdiabetes\treside\tin\tlow\tand\tmiddle\tincome\tcountries,\tmost\tof\tthe\tevidence\ton diabetes\tand\tdepression\tcomes\tfrom\thigh\tincome\tcountries.\tThis\treview\toffers\ta\tsummary\tof\texisting\tevidence and\tthe\tpotential\tgaps\tthat\tneed\tto\tbe\taddressed.

Thermochemical properties of oxides in Y-Ba-Cu-O, Sr-Bi-O, Cu-Nb-O, Sr-Cu-O, Ca-Cu-O, Cu-O and Hg-Ba-Ca-Cu-O systems

International Nuclear Information System (INIS)

Moiseev, G.K.; Vatolin, N.A.; Il'inykh, N.I.

2000-01-01

Thermochemical properties (ΔH 0 298 , S 0 298 , H 0 298 -H 0 0 , C p (T), C p at T>T melt ) of complex oxides in Y-Ba-Cu-O, Sr-Bi-O, Cu-Nb-O, Sr-Cu-O, Ca-Cu-O, Cu-O and Hg-Ba-Ca-Cu-O systems obtained with application of calculation methods are presented. Nonexperimental methods of estimation, revision and correction of standard formation enthalpies of inorganic compounds are described [ru

Design and analysis of a 1-ton prototype of the Jinping Neutrino Experiment

International Nuclear Information System (INIS)

Wang, Zongyi; Wang, Yuanqing; Wang, Zhe; Chen, Shaomin; Du, Xinxi; Zhang, Tianxiong; Guo, Ziyi; Yuan, Huanxin

2017-01-01

The Jinping Neutrino Experiment will perform an in-depth research on solar neutrinos and geo-neutrinos. Two structural options (i.e., cylindrical and spherical schemes) are proposed for the Jinping detector based on other successful underground neutrino detectors. Several key factors in the design are also discussed in detail. A 1-ton prototype of the Jinping experiment is proposed based on physics requirements. Subsequently, the structural design, installation procedure, and mechanical analysis of the neutrino detector prototype are discussed. The results show that the maximum Mises stresses on the acrylic vessel, stainless steel truss, and the tank are all lower than the design values of the strengths. The stability requirement of the stainless steel truss in the detector prototype is satisfied. Consequently, the structural scheme for the 1-ton prototype is safe and reliable.

Design and analysis of a 1-ton prototype of the Jinping Neutrino Experiment

Energy Technology Data Exchange (ETDEWEB)

Wang, Zongyi, E-mail: wangzongyi1990@outlook.com [School of Civil Engineering, Wuhan University, Wuhan 430072 (China); Wang, Yuanqing [Key Laboratory of Civil Engineering Safety and Durability of Education Ministry, Tsinghua University, Beijing 100084 (China); Wang, Zhe; Chen, Shaomin [Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); Du, Xinxi [School of Civil Engineering, Wuhan University, Wuhan 430072 (China); Zhang, Tianxiong [School of Civil Engineering, Tianjin University, Tianjin 300072 (China); Guo, Ziyi [Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); Yuan, Huanxin [School of Civil Engineering, Wuhan University, Wuhan 430072 (China)

2017-05-21

The Jinping Neutrino Experiment will perform an in-depth research on solar neutrinos and geo-neutrinos. Two structural options (i.e., cylindrical and spherical schemes) are proposed for the Jinping detector based on other successful underground neutrino detectors. Several key factors in the design are also discussed in detail. A 1-ton prototype of the Jinping experiment is proposed based on physics requirements. Subsequently, the structural design, installation procedure, and mechanical analysis of the neutrino detector prototype are discussed. The results show that the maximum Mises stresses on the acrylic vessel, stainless steel truss, and the tank are all lower than the design values of the strengths. The stability requirement of the stainless steel truss in the detector prototype is satisfied. Consequently, the structural scheme for the 1-ton prototype is safe and reliable.

Effects of Fertilizer Types and Irrigation Intervals of on Quantity Criteria of Lavender (Lavandula angustifolia, Rosemary (Rosemarinus officinalis and Hyssop (Hyssopus officinalis

Directory of Open Access Journals (Sweden)

A Koocheki

2012-02-01

Full Text Available In order to investigate the effects of fertilizer types and irrigation regimes on quantitative criteria of three medicinal plants: lavander, rosemary and hyssop, an experiment was conducted at Research Field of Faculty of Agriculture, Ferdowsi University of Mashhad, during two growing years of 2007-2010. A split-split plot design with three replications was used. Treatments were three irrigation intervals (10, 20, 30 days as main plots and three types of fertilizers in six levels: control, Nitroxin containing Azotobacter sp. and Azospirilum sp. (5lit/ha, nitrogen fertilizer (50 and 100 kg/ha, cow manure (10 and 20 ton/ha as subplots. Animal manure and chemical fertilizer were applied at the time of transferring seedlings to the field and Nitroxin was used with the first irrigation. Shoot harvesting was performed twice during the plant growth at the time of full flowering. Increasing irrigation intervals reduced dry matter yield of three species and the highest yield of lavender (3990 kg/ha, rosemary (2380 kg/ha and hyssop (7380 kg/ha were obtained with 10 days interval. Also the effect of fertilizer was not significant but the highest yield for lavender (3930kg/ha, rosemary (2535kg/ha was obtained with 50 kg/ha chemical fertilizer and the highest yield of hyssop (6117kg/ha resulted in application of 20 ton/ha animal manure. The ratio of leaf dry weight to stem dry weight for both years was gained with 30 days irrigation interval at 20 ton/ha animal manure. In general, the best treatment was 30 days interval irrigation and 20 ton/ha animal manure for the best yield and respective in local conditions

EFFECT OF SPACING AND NPK 20:10:10 FERTILIZER ON THE GROWTH AND YIELD OF WATER MELON (CITRULLUS LANATUS IN ENUGU, SOUTH EASTERN NIGERIA.

Directory of Open Access Journals (Sweden)

2016-11-01

Full Text Available A field experiment to investigate the effect of spacing and NPK 20:10:10 fertilizer on the growth and yield of watermelon was conducted at the teaching and Research Farm of Faculty of Agriculture and Natural Resources Management, Enugu State University of Science and Technology. The experiment was carried out in a 2 x 3 factorial in a Randomized Complete Block Design (RCBD with six (6 treatments replicated three (3 times using and ldquo;crimson sweet and rdquo; as a test crop. Parameters measured were vine length, number of fruits per plant, days to 50% flowering, fruit yield (ton/ha, and number of marketable fruits. 400kg/ha fertilizer in spacing 30cm x 30cm plots recorded the highest vine length of 193.8 cm which significantly deferred from the other treatment means. This was followed by 200kg/ha fertilizer in spacing of 30 cm x 30 cm which recorded vine length of 151.50 cm that significantly deferred from the rest of the treatment means. There were no significant differences between 400kg/ha fertilizer in 15 cm x 15 cm plots and 200kg/ha fertilizer in 15 cm x 15cm plots, O kg/ha fertilizer in 30 cm x 30 cm pots and O kg/ha fertilizer in 15cm x 15 cm plots on vine length. 400kg/ha fertilizer in 30 cm x 30 cm plots recorded the highest mean number of 34.33 fruits per plant which deferred significantly from the rest of the treatment means. The following treatments produced the same effects on the number of fruits per plant and ndash; 200kg/ha fertilizer in 30 cm x 30 cm plots and 400kg/ha fertilizer in 15 cm x 15 cm plots, O kg/ha fertilizer in 30 cm x 30 cm plots and O kg/ha fertilizer in 1 5cm x 15cm plots. On fruit yield (ton/ha 400kg/ha fertilizer in 30cm x 30cm plots, and 200kg/ha fertilizer in 30 cm x 30 cm plots produced the highest yield of 13.44 ton/ha and 13.22 ton/ha respectively which were not significantly different except the controls and ndash; O kg/ha fertilizer in 15cm x 15cm and O kg/ha fertilizer in 30 cm x 30 cm plots which

Long-term effects of different type and rates of organic amendments on reclamation of copper mine tailing in Central Chile.

Science.gov (United States)

Arellano, Eduardo; Garreton, Bruna; Ginocchio, Rosanna

2016-04-01

A study was conducted to evaluate the long-term effects of a single application of organic amendments on a copper mine tailings. Seven years after seeding of a mix of herbaceous plant and planting of ten native trees, and the application of organic amendment, plant community and soil fertility was measured in replicated plots that received six different treatments of waste water treatment plant biosolids (100 ton/ha, and 200 ton/ha), olive oil waste (100 ton/ha, and 200 ton/ha) and pisco grapes waste (90 ton/ha, and 200 ton/ha). A control treatment that received no organic amendment was also measured after seven years. Field measurements demonstrated that application of biosolids and pisco grapes waste, at both rates significantly improved vegetation coverage in comparison to the control treatment (80 and 100% vs control, 25%). The high rates of pisco waste had the highest vegetation diversity and survival in comparison to the other treatments. The high rate of olive oil waste had a negative effect on vegetation development in comparison to the control treatment. The application of organic amendment improved soil fertility in the long-term. All the treatments had a significant higher nitrogen concentration in comparison to the control treatment. The high rates of biosolids and pisco grape waste had a significantly effect of soil carbon concentration. Soil macro-aggregate in the high rate of pisco grape waste were also higher than the control, showing a positive relation between soil recover and vegetation development. We can conclude assisted phytostabilization of mine tailings is likely a technically effective solution for the valorisation of organic residues.

Enantiomers of HA-966 (3-amino-1-hydroxypyrrolid-2-one) exhibit distinct central nervous system effects: (+)-HA-966 is a selective glycine/N-methyl-D-aspartate receptor antagonist, but (-)-HA-966 is a potent gamma-butyrolactone-like sedative

International Nuclear Information System (INIS)

Singh, L.; Donald, A.E.; Foster, A.C.; Hutson, P.H.; Iversen, L.L.; Iversen, S.D.; Kemp, J.A.; Leeson, P.D.; Marshall, G.R.; Oles, R.J.; Priestley, T.; Thorn, L.; Tricklebank, M.D.; Vass, C.A.; Williams, B.J.

1990-01-01

The antagonist effect of ±-3-amino-1-hydroxypyrrolid-2-one (HA-966) at the N-methyl-D-aspartate (NMDA) receptor occurs through a selective interaction with the glycine modulatory site within the receptor complex. When the enantiomers of ±-HA-966 were resolved, the (R)-(+)-enantiomer was found to be a selective glycine/NMDA receptor antagonist, a property that accounts for its anticonvulsant activity in vivo. In contrast, the (S)-(-)-enantiomer was only weakly active as an NMDA-receptor antagonist, but nevertheless it possessed a marked sedative and muscle relaxant action in vivo. In radioligand binding experiments, (+)-HA-966 inhibited strychnine-insensitive [ 3 H]glycine binding to rat cerebral cortex synaptic membranes with an IC 50 of 12.5 μM, whereas (-)-HA-966 had an IC 50 value of 339 μM. In mice, (+)-HA-966 antagonized sound and N-methyl-DL-aspartic acid (NMDLA)-induced seizures. The coadministration of D-serine dose-dependently antagonized the anticonvulsant effect of a submaximal dose of (+)-HA-966 against NMDLA-induced seizures. The sedative/ataxic effect of racemic HA-966 was mainly attributable to the (-)-enantiomer. It is suggested that, as in the case of the sedative γ-butyrolactone, disruption of striatal dopaminergic mechanisms may be responsible for this action

Growth of intermetallics between Sn/Ni/Cu, Sn/Ag/Cu and Sn/Cu layered structures

International Nuclear Information System (INIS)

Horváth, Barbara; Illés, Balázs; Shinohara, Tadashi

2014-01-01

Intermetallic growth mechanisms and rates are investigated in Sn/Ni/Cu, Sn/Ag/Cu and Sn/Cu layer systems. An 8–10 μm thick Sn surface finish layer was electroplated onto a Cu substrate with a 1.5–2 μm thick Ni or Ag barrier layer. In order to induce intermetallic layer growth, the samples were aged in elevated temperatures: 50 °C and 125 °C. Intermetallic layer growth was checked by focused ion beam–scanning ion microscope. The microstructures and chemical compositions of the intermetallic layers were observed with a transmission electron microscope. It has been found that Ni barrier layers can effectively block the development of Cu 6 Sn 5 intermetallics. The intermetallic growth characteristics in the Sn/Cu and Sn/Ni/Cu systems are very similar. The intermetallic layer grows towards the Sn layer and forms a discrete layer. Differences were observed only in the growth gradients and surface roughness of the intermetallic layer which may explain the different tin whiskering properties. It was observed that the intermetallic layer growth mechanisms are completely different in the Ag barrier layers compared to the Ni layers. In the case of Sn/Ag/Cu systems, the Sn and Cu diffused through the Ag layer, formed Cu 6 Sn 5 intermetallics mainly at the Sn/Ag interface and consumed the Ag barrier layer. - Highlights: • Intermetallic growth was characterised in Sn/Ni/Cu, Sn/Ag/Cu and Sn/Cu layer systems. • Intermetallic growth rates and roughness are similar in the Sn/Cu and Sn/Ni/Cu systems. • Sn/Ni/Cu system contains the following intermetallic layer structure Sn–Ni3Sn4–Ni3Sn2–Ni3Sn–Ni. • In the case of Sn/Ag/Cu systems the Sn and Cu diffusion consumes the Ag barrier layer. • When Cu reaches the Sn/Ag interface a large amount of Cu 6 Sn 5 forms above the Ag layer

Active Seismic Monitoring Using High-Power Moveable 40-TONS Vibration Sources in Altay-Sayn Region of Russia

Science.gov (United States)

Soloviev, V. M.; Seleznev, V. S.; Emanov, A. F.; Kashun, V. N.; Elagin, S. A.; Romanenko, I.; Shenmayer, A. E.; Serezhnikov, N.

2013-05-01

The paper presents data of operating vibroseismic observations using high-power stationary 100-tons and moveable 40-tons vibration sources, which have been carried out in Russia for 30 years. It is shown that investigations using high-power vibration sources open new possibilities for study stressedly-deformed condition of the Earth`s crust and the upper mantle and tectonic process in them. Special attention is given to developing operating seismic translucences of the Earth`s crust and the upper mantle using high-power 40-tons vibration sources. As a result of experimental researches there was proved high stability and repeatability of vibration effects. There were carried out long period experiments of many days with vibration source sessions of every two hours with the purpose of monitoring accuracy estimation. It was determined, that repeatability of vibroseismic effects (there was researched time difference of repeated sessions of P- and S-waves from crystal rocks surface) could be estimated as 10-3 - 10-4 sec. It is ten times less than revealed here annual variations of kinematic parameters according to regime vibroseismic observations. It is shown, that on hard high-speed grounds radiation spectrum becomes narrowband and is dislocated to high frequency; at the same time quantity of multiple high-frequency harmonic is growing. At radiation on soft sedimentary grounds (sand, clay) spectrum of vibration source in near zone is more broadband, correlograms are more compact. there Correspondence of wave fields from 40-tons vibration sources and explosions by reference waves from boundaries in he Earth`s crust and the upper mantle at record distance of 400 km was proved by many experiments in various regions of Russia; there was carried out the technique of high-power vibration sources grouping for increase of effectiveness of emanation and increase of record distance. According to results of long-term vibroseismic monitoring near Novosibirsk (1997-2012) there are

Agronomic parameters in broccoli ( Brassica oleraceae L. var. Italica in convencional, organic and natural crop systems/ Parâmetros agronômicos em couve-brócolos ( Brassica oleraceae L. var. Italica em sistema convencional, orgânico e natural

Directory of Open Access Journals (Sweden)

Pedro Manoel Oliveira Janeiro Neves

2001-05-01

Full Text Available Agronomic parameters were assessed in broccoli ( Brassica oleraceae L. var. italica, cv. Legacy, in different cultivation systems: Natural 1 [incorporation of elephant grass Pennisetum purpureum Schumacher cv. “Napier” (50 ton/ha, Bokashi compost (1,5 ton/ ha and EM-4 spraying (20 l/ha]; Natural 2 [Bokashi compost (1,5 ton/ ha and EM-4 spraying (20 l/ha]; Conventional (NPK in the planting + bórax + dressing N]; Organic [organic compost (1 kg/plant]. Plants high were assessed 30, 45 and 60 days after planting; cycle; fresh weight; shelf life and dried weight were also evaluated. Fresh weight of leaves and stems in conventional was higher then in organic treatment. Inflorescence fresh weight, leaves and stems dried weight and shelf life were similar among treatments. The inflorescence fresh and dried weight from conventional were higher than those from Organic and Natural 1. Cycle found in Natural 1 was longer than the other treatments.Parâmetros agronômicos foram avaliados em couve-brócolos ( Brassica oleraceae L . var. italica, cv. Legacy, em quatro sistemas de cultivo: Natural 1 [incorporação de capim elefante Pennisetum purpureum Schumacher cv. “Napier” (50 ton/ha, composto Bokashi (1,5 ton/ ha e pulverização de EM-4 (20 l/ha]; Natural 2 [incorporação de composto Bokashi (1,5 ton/ ha e pulverização de EM-4 (20 l/ha]; Convencional [NPK no plantio + bórax + N em cobertura]; Orgânico [aplicação de composto (1 kg/planta]. Avaliou-se a altura das plantas aos 30, 45 e 60 dias após o transplantio; duração do ciclo, peso fresco, período de conservação pós-colheita e peso seco. O peso fresco da parte vegetativa obtido no sistema convencional foi superior ao sistema orgânico. O peso fresco e seco da inflorescência obtido no sistema convencional, foi superior àquele obtido nos sistemas Orgânico e Natural 1. O ciclo no sistema Natural 1 foi mais longo do que nos outros tratamentos.

Fluoresceination of FepA during colicin B killing: effects of temperature, toxin and TonB.

Science.gov (United States)

Smallwood, Chuck R; Marco, Amparo Gala; Xiao, Qiaobin; Trinh, Vy; Newton, Salete M C; Klebba, Phillip E

2009-06-01

We studied the reactivity of 35 genetically engineered Cys sulphydryl groups at different locations in Escherichia coli FepA. Modification of surface loop residues by fluorescein maleimide (FM) was strongly temperature-dependent in vivo, whereas reactivity at other sites was much less affected. Control reactions with bovine serum albumin showed that the temperature dependence of loop residue reactivity was unusually high, indicating that conformational changes in multiple loops (L2, L3, L4, L5, L7, L8, L10) transform the receptor to a more accessible form at 37 degrees C. At 0 degrees C colicin B binding impaired or blocked labelling at 8 of 10 surface loop sites, presumably by steric hindrance. Overall, colicin B adsorption decreased the reactivity of more than half of the 35 sites, in both the N- and C- domains of FepA. However, colicin B penetration into the cell at 37 degrees C did not augment the chemical modification of any residues in FepA. The FM modification patterns were similarly unaffected by the tonB locus. FepA was expressed at lower levels in a tonB host strain, but when we accounted for this decrease its FM labelling was comparable whether TonB was present or absent. Thus we did not detect TonB-dependent structural changes in FepA, either alone or when it interacted with colicin B at 37 degrees C. The only changes in chemical modification were reductions from steric hindrance when the bacteriocin bound to the receptor protein. The absence of increases in the reactivity of N-domain residues argues against the idea that the colicin B polypeptide traverses the FepA channel.

CuO reduction induced formation of CuO/Cu2O hybrid oxides

Science.gov (United States)

Yuan, Lu; Yin, Qiyue; Wang, Yiqian; Zhou, Guangwen

2013-12-01

Reduction of CuO nanowires results in the formation of a unique hierarchical hybrid nanostructure, in which the parent oxide phase (CuO) works as the skeleton while the lower oxide (Cu2O) resulting from the reduction reaction forms as partially embedded nanoparticles that decorate the skeleton of the parent oxide. Using in situ transmission electron microscopy observations of the reduction process of CuO nanowires, we demonstrate that the formation of such a hierarchical hybrid oxide structure is induced by topotactic nucleation and growth of Cu2O islands on the parent CuO nanowires.

Morphology and chemical composition of Cu/Sn/Cu and Cu(5 at-%Ni)/Sn/Cu(5 at-%Ni) interconnections

NARCIS (Netherlands)

Wierzbicka-Miernik, A.; Wojewoda-Budka, J.; Litynska-Dobrzynska, L.; Kodentsov, A.; Zieba, P.

2012-01-01

In the present paper, scanning and transmission electron microscopies as well as energy dispersive X-ray spectroscopy investigations were performed to describe the morphology and chemical composition of the intermetallic phases growing in Cu/Sn/Cu and Cu(Ni)/Sn/Cu(Ni) interconnections during the

Preparation, optimization and property of PVA-HA/PAA composite hydrogel.

Science.gov (United States)

Chen, Kai; Liu, Jinlong; Yang, Xuehui; Zhang, Dekun

2017-09-01

PVA-HA/PAA composite hydrogel is prepared by freezing-thawing, PEG dehydration and annealing method. Orthogonal design method is used to choose the optimization combination. Results showed that HA and PVA have the maximum effect on water content. PVA and freezing-thawing cycles have the maximum effect on creep resistance and stress relaxation rate of hydrogel. Annealing temperature and freezing-thawing cycles have the maximum effect on compressive elastic modulus of hydrogel. Comparing with the water content and mechanical properties of 16 kinds of combination, PVA-HA/PAA composite hydrogel with freezing-thawing cycles of 3, annealing temperature of 120°C, PVA of 16%, HA of 2%, PAA of 4% has the optimization comprehensive properties. PVA-HA/PAA composite hydrogel has a porous network structure. There are some interactions between PVA, HA and PAA in hydrogel and the properties of hydrogel are strengthened. The annealing treatment improves the crystalline and crosslinking of hydrogel. Therefore, the annealing PVA-HA/PAA composite hydrogel has good thermostability, strength and mechanical properties. It also has good lubrication property and its friction coefficient is relative low. Copyright © 2017 Elsevier B.V. All rights reserved.

[Construction of porous hydroxyapatite (HA) block loaded with cultured chondrocytes].

Science.gov (United States)

Yan, M; Dang, G

1999-07-01

To construct a kind of bone healing enhancing implant with cultured chondrocytes bound to hydroxyapatite (HA). Chondrocytes were obtained from the costicartilage of rat and were cultured on the porous HA blocks, 3 mm x 3 mm x 4 mm size, for three and seven days. Scanning electron micrograph was taken to show whether the cells grew outside and inside the pore of HA block. The cells cultured on tiny glass sheet for 2 days were used to prove where the cells come from by in situ hybridization technique with alpha1 (II) cDNA probe. Scanning electron micrographs showed that the pores of the HA surface and inside of the blocks are filled with cultured cells, especially the longer cultured block. The cells were chondrocytes confirmed by in situ hybridization. The porous HA can be used as cell cultured substrate and chondrocyte can adhere and proliferate inside the porous HA block.

Trading carbon for food: global comparison of carbon stocks vs. crop yields on agricultural land.

Science.gov (United States)

West, Paul C; Gibbs, Holly K; Monfreda, Chad; Wagner, John; Barford, Carol C; Carpenter, Stephen R; Foley, Jonathan A

2010-11-16

Expanding croplands to meet the needs of a growing population, changing diets, and biofuel production comes at the cost of reduced carbon stocks in natural vegetation and soils. Here, we present a spatially explicit global analysis of tradeoffs between carbon stocks and current crop yields. The difference among regions is striking. For example, for each unit of land cleared, the tropics lose nearly two times as much carbon (∼120 tons·ha(-1) vs. ∼63 tons·ha(-1)) and produce less than one-half the annual crop yield compared with temperate regions (1.71 tons·ha(-1)·y(-1) vs. 3.84 tons·ha(-1)·y(-1)). Therefore, newly cleared land in the tropics releases nearly 3 tons of carbon for every 1 ton of annual crop yield compared with a similar area cleared in the temperate zone. By factoring crop yield into the analysis, we specify the tradeoff between carbon stocks and crops for all areas where crops are currently grown and thereby, substantially enhance the spatial resolution relative to previous regional estimates. Particularly in the tropics, emphasis should be placed on increasing yields on existing croplands rather than clearing new lands. Our high-resolution approach can be used to determine the net effect of local land use decisions.

Võidupüha 8. mail? / Leonti Kährik

Index Scriptorium Estoniae

Kährik, Leonti

2005-01-01

Eesti peaks väärikalt tähistama võidupüha kui euroopalike demokraatlike väärtuste võitu natsismi ja fašismi üle. Lähtudes 1940. a. juunini Eestis kehtinud vööndiajast, võiks võidupüha tähistada 8. mail

IR and TPD studies of the interaction of alkenes with Cu + sites in CuNaY and CuNaX zeolites of various Cu content. The heterogeneity of Cu + sites

Science.gov (United States)

Datka, J.; Kukulska-Zajaç, E.; Kozyra, P.

2006-08-01

Cu + ions in zeolites activate organic molecules containing π electrons by π back donation, which results in a distinct weakening of multiple bonds. In this study, we followed the activation of alkenes (ethene and propene) by Cu + ions in CuY and CuX zeolites of various Cu content. We also studied the strength of bonding of alkenes to Cu + ions. IR studies have shown that there are two kinds of Cu + sites of various electron donor properties. We suppose that they could be attributed to the presence of Cu + ions of various number of oxygen atoms surrounding the cation. IR studies have shown that Cu ions introduced into Y and X zeolites in the first-order (at low Cu content) form Cu + ions of stronger electron donor properties (i.e. activate alkenes to larger extend) than Cu ions introduced in the next order (at higher Cu content). IR and TPD studies of alkenes desorption evidenced that Cu + ions of stronger electron donor properties bond alkenes stronger than less electron donor ones. It suggests that π back donation has more important contribution to the strength of bonding alkenes to cation than π donation.

Fracture behaviour of Cu-Al-Ni shape memory alloys obtained by powder metallurgy

International Nuclear Information System (INIS)

Rodriguez, P. P.; Perez-Saez, R. B.; Recarte, V.; San Juan, J.M.; Ruano, O. A.; No, M. L.

2001-01-01

Polycrystalline Cu-Al-Ni shape memory alloys have been scarcely employed for technological applications due to their high brittleness. The development of a new elaboration technique based on powder metallurgy has recently overcome this problem, through the improvement of the ductility of the produced alloys without affecting its shape memory properties. The fracture behaviour of an alloy obtained using the elaboration technique has been studied by means of Scanning Electron Microscopy and mechanical testing. The results show a ductile fracture with a maximum strain close to 13%, which is the best fracture behaviour obtained for Cu-Al-Ni polycrystals. The microstructure of such alloys ha been studied by means of Transmission Electron Microscopy, showing a poligonyzed structure in which martensite plated passing through the subboundaries easily. (Author) 19 refs

Porous HKUST-1 derived CuO/Cu2O shell wrapped Cu(OH)2 derived CuO/Cu2O core nanowire arrays for electrochemical nonenzymatic glucose sensors with ultrahigh sensitivity

Science.gov (United States)

Yu, Cuiping; Cui, Jiewu; Wang, Yan; Zheng, Hongmei; Zhang, Jianfang; Shu, Xia; Liu, Jiaqin; Zhang, Yong; Wu, Yucheng

2018-05-01

Self-supported CuO/Cu2O@CuO/Cu2O core-shell nanowire arrays (NWAs) are successfully fabricated by a simple and efficient method in this paper. Anodized Cu(OH)2 NWAs could in-situ convert to HKUST-1 at room temperature easily. Cu(OH)2 NWAs cores and HKUST-1 shells transform into CuO/Cu2O simultaneously after calcinations and form CuO/Cu2O@CuO/Cu2O core-shell NWAs. This smart configuration of the core-shell structure not only avoids the agglomeration of the traditional MOF-derived materials in particle-shape, but also facilitates the ion diffusion and increases the active sites. This novel structure is employed as substrate to construct nonenzymatic glucose sensors. The results indicate that glucose sensor based on CuO/Cu2O@CuO/Cu2O core-shell NWAs presents ultrahigh sensitivity (10,090 μA mM-1 cm-2), low detection limit (0.48 μM) and wide linear range (0.99-1,330 μM). In addition, it also shows excellent anti-interference ability toward uric acid, ascorbic acid and L-Cysteine co-existing with glucose, good reproducibility and superior ability of real sample analysis.

Prospects of HA-Based Universal Influenza Vaccine

Directory of Open Access Journals (Sweden)

Anwar M. Hashem

2015-01-01

Full Text Available Current influenza vaccines afford substantial protection in humans by inducing strain-specific neutralizing antibodies (Abs. Most of these Abs target highly variable immunodominant epitopes in the globular domain of the viral hemagglutinin (HA. Therefore, current vaccines may not be able to induce heterosubtypic immunity against the divergent influenza subtypes. The identification of broadly neutralizing Abs (BnAbs against influenza HA using recent technological advancements in antibody libraries, hybridoma, and isolation of single Ab-secreting plasma cells has increased the interest in developing a universal influenza vaccine as it could provide life-long protection. While these BnAbs can serve as a source for passive immunotherapy, their identification represents an important step towards the design of such a universal vaccine. This review describes the recent advances and approaches used in the development of universal influenza vaccine based on highly conserved HA regions identified by BnAbs.

Comparative study of Cu-Zr and Cu-Ru alloy films for barrier-free Cu metallization

International Nuclear Information System (INIS)

Wang Ying; Cao Fei; Zhang Milin; Liu Yuntao

2011-01-01

The properties of Cu-Zr and Cu-Ru alloy films were comparatively studied to evaluate their potential use as alloying elements. Cu alloy films were deposited on SiO 2 /Si substrates by magnetron sputtering. Samples were subsequently annealed and analyzed by four-point probe measurement, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy and Auger electron spectroscopy. X-ray diffraction data suggest that Cu film has preferential (111) crystal orientation and no extra peak corresponding to any compound of Cu, Zr, Ru, and Si. According to transmission electron microscopy results, Cu grains grow in size for both systems but the grain sizes of the Cu alloy films are smaller than that of pure Cu films. These results indicate that Cu-Zr film is suitable for advanced barrier-free metallization in terms of interfacial stability and lower resistivity.

Instability of the critical state in NdBa2Cu3O7-δ single crystals

DEFF Research Database (Denmark)

Koblischka, M.R.; Murakami, M.; Koishikawa, S.

1999-01-01

Instabilities of the critical state are observed in various NdBa2Cu3O7-delta single crystals by means of direct magneto-optic (MO) imaging while warming up flux states containing vortices of opposite polarity. Using the same samples as in the MO investigations, we observe for the first time......, and also in the orientations H-a parallel to c and H-a perpendicular to c. As a result, we find turbulence not only in a narrow window of temperatures (65 less than or equal to T less than or equal to 80 K), but also in a window of applied negative fields ranging between 30 and 80 mT....

A ton is not always a ton: A road-test of landfill, manure, and afforestation/reforestation offset protocols in the U.S. carbon market

International Nuclear Information System (INIS)

Lee, Carrie M.; Lazarus, Michael; Smith, Gordon R.; Todd, Kimberly; Weitz, Melissa

2013-01-01

Highlights: • Protocols are the foundation of an offset program. • Using sample projects, we “road test” landfill, manure and afforestation protocols from 5 programs. • For a given project, we find large variation in the volume of offsets generated. • Harmonization of protocols can increase the likelihood that “a ton is a ton”. • Harmonization can enhance prospects for linking emission trading systems. -- Abstract: The outcome of recent international climate negotiations suggests we are headed toward a more fragmented carbon market, with multiple emission trading and offset programs operating in parallel. To effectively harmonize and link across programs, it will be important to ensure that across offset programs and protocols that a “ton is a ton”. In this article, we consider how sample offsets projects in the U.S. carbon market are treated across protocols from five programs: the Clean Development Mechanism, Climate Action Reserve, Chicago Climate Exchange, Regional Greenhouse Gas Initiative, and the U.S. EPA's former program, Climate Leaders. We find that differences among protocols for landfill methane, manure management, and afforestation/reforestation project types in accounting boundary definitions, baseline setting methods, measurement rules, emission factors, and discounts lead to differences in offsets credited that are often significant (e.g. greater than 50%). We suggest opportunities for modification and harmonization of protocols that can improve offset quality and credibility and enhance prospects for future linking of trading units and systems

Cu/Cu{sub 2}O/CuO nanoparticles: Novel synthesis by exploding wire technique and extensive characterization

Energy Technology Data Exchange (ETDEWEB)

Sahai, Anshuman [Department of Physics and Materials Science and Engineering, Jaypee Institute of Information Technology, A-10, Sector-62, Noida 201307 (India); Goswami, Navendu, E-mail: navendugoswami@gmail.com [Department of Physics and Materials Science and Engineering, Jaypee Institute of Information Technology, A-10, Sector-62, Noida 201307 (India); Kaushik, S.D. [UGC-DAE-Consortium for Scientific Research Mumbai Centre, R5 Shed, BARC, Mumbai 400085 (India); Tripathi, Shilpa [UGC-DAE Consortium for Scientific Research, Indore, M.P. (India)

2016-12-30

Highlights: The salient features of this research article are following: • Mixed phase synthesis of Cu/Cu{sub 2}O/CuO nanoparticles prepared by Exploding Wire Technique (EWT). • Predominant Cu/Cu{sub 2}O phases along with minor CuO phase revealed through XRD, TEM, Raman, FTIR, UV–Visible and PL analyses. • XPS analysis provided direct evidences of Cu{sup 2+} and Cu{sup +} along with O deficiency for prepared nanoparticles. • Room temperature weak ferromagnetic behaviour was demonstrated for Cu/Cu{sub 2}O/CuO nanoparticles. - Abstract: In this article, we explore potential of Exploding Wire Technique (EWT) to synthesize the copper nanoparticles using the copper metal in a plate and wire geometry. Rietveld refinement of X-ray diffraction (XRD) pattern of prepared material indicates presence of mixed phases of copper (Cu) and copper oxide (Cu{sub 2}O). Agglomerates of copper and copper oxide comprised of ∼20 nm average size nanoparticles observed through high resolution transmission electron microscope (HRTEM) and energy dispersive x-ray (EDX) spectroscopy. Micro-Raman (μR) and Fourier transform infrared (FTIR) spectroscopies of prepared nanoparticles reveal existence of additional minority CuO phase, not determined earlier through XRD and TEM analysis. μR investigations vividly reveal cubic Cu{sub 2}O and monoclinic CuO phases based on the difference of space group symmetries. In good agreement with μRaman analysis, FTIR stretching modes corresponding to Cu{sub 2}-O and Cu-O were also distinguished. Investigations of μR and FTIR vibrational modes are in accordance and affirm concurrence of CuO phases besides predominant Cu and Cu{sub 2}O phase. Quantum confinement effects along with increase of band gaps for direct and indirect optical transitions of Cu/Cu{sub 2}O/CuO nanoparticles are reflected through UV–vis (UV–vis) spectroscopy. Photoluminescence (PL) spectroscopy spots the electronic levels of each phase and optical transitions processes

Study of calibration equations of 137Cs methodology for soil erosion determination

International Nuclear Information System (INIS)

Santos, Elias Antunes dos

2001-02-01

Using the method of 137 Cs and gamma-ray spectrometry, soil samples of two plots erosion were studied at Londrina city. the soil class studied was a dystrophic dark red soil (LRd), with erosion indexes measured by Agronomic Institute of Parana State (IAPAR) using a conventional method, since 1976. Through the percentage reduction of 137 Cs related to the reference site, the soil losses were calculated using the proportional, mass balance and profile distribution models. Making the correlation between the 137 Cs concentrations and the erosion measured by IAPAR, two calibration equations were obtained and applied to the data set measured in the basin of the Unda river and compared to those models in the literature. As reference region, was chosen a natural forest located close to the plots. The average inventory of 137 Cs was 555± 16 Bq.m -2 . The inventories of the erosion plots varied from 112 to 136 Bq.m -2 for samples collected until 30 cm depth. The erosion rates estimated by the models varied from 64 to 85 ton.ha -1 .yr -1 for the proportional and profile distribution models, respectively, and 137 to 165 ton.ha -1 for the mass balance model, while the measured erosion obtained by IAPAR was 86 ton.ha -1 .yr -1 . From the two calibration equations obtained, the one that take into account the 137 Cs distribution with the soil profile was that showed the best consistence with the erosion rated for the basin of the Unda river (same soil class) in the range from 4 to 48 ton.ha -1 .yr -1 , while the proportional and profile distribution models applied rates from 7 to 45 ton.ha -1 .yr -1 and 6 to 69 ton.ha -1 .yr -1 , respectively. (author)

PENGARUH JENIS DAN DOSIS PUPUK KANDANG TERHADAP PERTUMBUHAN DAN PRODUKSI JAGUNG MANIS (Zea mays saccharata Sturt

Directory of Open Access Journals (Sweden)

A.A.A.S. Trisnadewi

2011-08-01

Full Text Available The experiment that aimed to study the types and various levels of manure for improving growth and production of sweet corn was conducted for 9 weeks. Completely randomized design (CRD arranged with nested model was used in this experiment. The main plot consisted of three kind of manures, there were broiler manure (A, horse manure (K, and pig manure (B. As sub plot were levels of manure: without manure D0 (0 ton/ha, D1 (10 ton/ha = 87.51 g/pot, D2 (20 ton/ha = 175 g/pot, D3 (30 ton/ha = 262.5 g/pot, with three replication in each combination treatment. Variables measured in this experiment were plant high, stem diameter, fresh and dry weight of leaf, stem and maize-ear of corn, total dry weight of forage production (stem + leaf and dry weight ratio of stem and leaf of sweet corn. The result of the experiment showed that the effect of broiler, horse, and pig manure on all variables which measured in the experiment were not significantly different (P>0,05. The highest growth and production of sweet corn were obtained at 20 ton/ha level for all kind of manures that used in this experiment with total dry weight of forage production 48.88; 51.11; and 48.30 g/pot and dry weight of maize-ear production 23.80; 23.30 and 22.00 g/pot for broiler, horse and pig manure respectively. Based on results of the experiment it can be concluded that no different effect on type of manure (broiler, horse and pig to the growth and production of sweet corn and the using manure at 20 ton/ha level give the highest growth and production of sweet corn.

Potential Land Mapping for Agricultural Extentification in Mengwi Sub-district to Support Food Balance in Badung Regency, Indonesia

Science.gov (United States)

Made Trigunasih, Ni; Lanya, Indayati; Ratna Adi, I. G. P.; Hutauruk, Jeremia; Feronika

2017-12-01

The availability of agricultural land for food crops, especially in Bali, is rapidly declining every year. The availability of rice fields in Badung regency, especially in Mengwi Sub-district until 2040 is no longer exist, this means that Mengwi Sub-district has lost the rice fields. The existence of land conversion will affect food availability for the country, so there will be food deficit. The food balance in Badung Regency in 2015 with Cultivation Index (IP) and initial productivity in each Sub-district showed a food deficit of 32,843.44 tons, then after increasing IP of 2,5 the productivity in Kecamatan Petang and Kuta at 7 tons / ha, and Abiansemal, Mengwi and North Kuta Sub-districts with 8 tons / ha which indicate a surplus in 2020 and 2030 respectively of 25,155.19 tons, and 3,401.79 tons. But in 2040 and 2050 there was a food deficiency of 18,434.78 tons and 11,824.82 tons respectively. Considering that productivity improvement efforts cannot rely solely on intensification approaches, but also need to be done with extensification or expansion of agricultural areas to support food production. This research was conducted in Mengwi Sub-district, Badung Regency. Mengwi Sub-district consists of 20 villages. The objectives of this research are: (1) to map potential land that can be converted to agricultural land of food crops, and (2) to know the amount of food demand to supply food balance in Badung Regency in 2040. Research methodology includes (1) preliminary study, (2) interpretation of satellite images, (3) mapping and measurement of land area, and (4) calculation of additional food availability. The results indicate that the potential land that can be converted to agricultural land for food crops is 132 ha, consists of 128.51 ha of mixed plantation and 3.49 ha of bare land/bush. The result of additional land produced 1601.73 tons of rice that increased the food availability in Mengwi Sub-district to 45425.7 tons. The addition of surplus in 2040 in Mengwi

TINGKAT PENYERAPAN NITROGEN DAN FOSFOR PADA BUDIDAYA RUMPUT LAUT BERBASIS IMTA (INTEGRATED MULTI-TROPHIC AQUACULTURE DI TELUK GERUPUK, LOMBOK TENGAH, NUSA TENGGARA BARAT

Directory of Open Access Journals (Sweden)

Erna Yuniarsih

2014-12-01

Full Text Available Pengembangan budidaya laut berbasis IMTA (Integrated Multi-Trophic Aquaculture merupakan suatu metode yang dirancang untuk mengatasi masalah lingkungan yang terkait dengan penggunaan pakan pada kegiatan akuakultur. Penelitian ini bertujuan untuk menganalisis tingkat penyerapan nitrogen dan fosfor pada budidaya rumput laut berbasis IMTA di Teluk Gerupuk Kabupaten Lombok Tengah. Rumput laut jenis Kappaphycus alvarezii dan Eucheuma spinosum dibudidayakan dengan metode rawai (long line. Pengamatan terhadap rumput laut dan kondisi perairan dilakukan setiap 15 hari; mulai hari ke-0 sampai hari ke-45. Hasil penelitian menunjukkan bahwa adanya perbedaan tingkat penyerapan nitrogen dan fosfor antara dua jenis rumput laut yang dibudidayakan. Total penyerapan nitrogen rumput laut K. alvarezii di lokasi IMTA mencapai 86,95 ton N/ha/tahun atau lebih tinggi 24,6% dibandingkan dengan E. spinosum yang mencapai 69,78 ton N/ha/tahun. Sedangkan untuk tingkat penyerapan fosfor, K. alvarezii mencapai 20,56 ton P/ha/tahun atau lebih tinggi 136,7% dibandingkan dengan E. spinosum yang hanya mencapai 8,69 ton P/ha/tahun. Berdasarkan luasan kawasan potensial budidaya rumput laut di Teluk Gerupuk, maka potensi penyerapan nitrogen dan fosfor untuk rumput laut K. alvarezii di kawasan ini masing-masing mencapai 27.996,93 ton N/tahun dan 6.619,16 ton P/tahun. Sedangkan untuk E. spinosum potensi penyerapan nitrogen dan fosfor masing-masing mencapai 22.470,02 ton N/tahun dan 2.796,82 ton P/tahun. Penerapan budidaya rumput laut berbasis IMTA secara jelas memberikan keuntungan ekonomi dan ekologi dengan adanya peningkatan biomassa dan perbaikan kondisi lingkungan budidaya.

CH{sub 4} dehydrogenation on Cu(1 1 1), Cu@Cu(1 1 1), Rh@Cu(1 1 1) and RhCu(1 1 1) surfaces: A comparison studies of catalytic activity

Energy Technology Data Exchange (ETDEWEB)

Zhang, Riguang; Duan, Tian [Key Laboratory of Coal Science and Technology of Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, Shanxi (China); Ling, Lixia [Key Laboratory of Coal Science and Technology of Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, Shanxi (China); Research Institute of Special Chemicals, Taiyuan University of Technology, Taiyuan 030024, Shanxi (China); Wang, Baojun, E-mail: wangbaojun@tyut.edu.cn [Key Laboratory of Coal Science and Technology of Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, Shanxi (China)

2015-06-30

Highlights: • Adsorbed Rh atom on Cu catalyst exhibits better catalytic activity for CH{sub 4} dehydrogenation. • The adsorbed Rh atom is the reaction active center for CH{sub 4} dehydrogenation. • The morphology of Cu substrate has negligible effect on CH{sub 4} dehydrogenation. - Abstract: In the CVD growth of graphene, the reaction barriers of the dehydrogenation for hydrocarbon molecules directly decide the graphene CVD growth temperature. In this study, density functional theory method has been employed to comparatively probe into CH{sub 4} dehydrogenation on four types of Cu(1 1 1) surface, including the flat Cu(1 1 1) surface (labeled as Cu(1 1 1)) and the Cu(1 1 1) surface with one surface Cu atom substituted by one Rh atom (labeled as RhCu(1 1 1)), as well as the Cu(1 1 1) surface with one Cu or Rh adatom (labeled as Cu@Cu(1 1 1) and Rh@Cu(1 1 1), respectively). Our results show that the highest barrier of the whole CH{sub 4} dehydrogenation process is remarkably reduced from 448.7 and 418.4 kJ mol{sup −1} on the flat Cu(1 1 1) and Cu@Cu(1 1 1) surfaces to 258.9 kJ mol{sup −1} on RhCu(1 1 1) surface, and to 180.0 kJ mol{sup −1} on Rh@Cu(1 1 1) surface, indicating that the adsorbed or substituted Rh atom on Cu catalyst can exhibit better catalytic activity for CH{sub 4} complete dehydrogenation; meanwhile, since the differences for the highest barrier between Cu@Cu(1 1 1) and Cu(1 1 1) surfaces are smaller, the catalytic behaviors of Cu@Cu(1 1 1) surface are very close to the flat Cu(1 1 1) surface, suggesting that the morphology of Cu substrate does not obviously affect the dehydrogenation of CH{sub 4}, which accords with the reported experimental observations. As a result, the adsorbed or substituted Rh atom on Cu catalyst exhibit a better catalytic activity for CH{sub 4} dehydrogenation compared to the pure Cu catalyst, especially on Rh-adsorbed Cu catalyst, we can conclude that the potential of synthesizing high-quality graphene with the

Ants at Ton Nga Chang Wildlife Sanctuary, Songkhla

Directory of Open Access Journals (Sweden)

Watanasit, S.

2005-03-01

Full Text Available The aim of this study was to investigate diversity of ant at Ton Nga Chang Wildlife Sanctuary, Hat Yai, Songkhla. Three line transects (100 m each were randomly set up in 2 types of forest area, disturbed and undisturbed. Hand collecting (HC and leaf litter sampling (LL were applied for ant collection within a time limit of 30 minutes for each method. This study was carried out every month during Febuary 2002- Febuary 2003. The results showed that 206 species were placed under 8 subfamilies: Aenictinae, Cerapachyinae, Dolichoderinae, Formicinae, Leptanillinae, Myrmicinae, Ponerinae and Pseudomyrmecinae. Study sites and collection methods could divide ant species into 2 groups, whereas seasonal change could not distinguish the groups by DCA of multivariate analysis.

Simultaneous removal of As, Cd, Cr, Cu, Ni and Zn from stormwater using high-efficiency industrial sorbents: Effect of pH, contact time and humic acid.

Science.gov (United States)

Genç-Fuhrman, Hülya; Mikkelsen, Peter S; Ledin, Anna

2016-10-01

The effect of contact time, solution pH, and the presence of humic acid (HA) on the combined removal of As, Cd, Cr, Cu, Ni and Zn is investigated in batch tests using alumina, granulated activated carbon (GAC), and bauxsol coated sand (BCS) as sorbents. It is found that the equilibrium time for Cd, Cu, Ni and Zn is about 4h, while no clear equilibrium is observed for As and Cr. It is also found that increasing the pH until pH~8 enhanced Cd, Cu, Ni and Zn removal, but increasing the pH above this point had no major effect. In the cases of As and Cr, higher pH values (i.e. >7) decreased their removal. The presence of both 20 and 100mg/L HA suppressed the heavy metal removal except for Cr, and the suppression was higher at the higher HA concentration. Geochemical simulations suggest that this is due to the formation of dissolved HA-metal complexes preventing effective metal sorption. In the case of Cr, the presence of HA increased the removal when using alumina or BCS, while hindering the removal when using GAC. The findings show that the pH-value of the stormwater to be treated must be in the range of 6-7 in order to achieve removal of the full spectrum of metals. The results also show that natural organic matter may severely influence the removal efficiency, such that, for most metals the removal was reduced to the half, while for Cr it was increased to the double for alumina and BCS. Consequently, a properly working filter set up may not work properly anymore when receiving high loads of natural organic acids during the pollen season in spring or during defoliation in autumn and early winter, and during mixing of runoff with snowmelt having a low pH. Copyright © 2016 Elsevier B.V. All rights reserved.

Helianthus tuberosus L.

African Journals Online (AJOL)

Jane

2011-08-17

Aug 17, 2011 ... The first frost kills the stems and leaves, but tubers withstand freezing for months. Average tuber yields of 16 to 20 ton/ha may be expected from crops grown under ordinary farm conditions. Yields of tops for forage average are 18 to 28 ton/ha green weight (Duke,. 1983). The effect of cutting of Helianthus ...

Cu/Cu2O/CuO nanoparticles: Novel synthesis by exploding wire technique and extensive characterization

Science.gov (United States)

Sahai, Anshuman; Goswami, Navendu; Kaushik, S. D.; Tripathi, Shilpa

2016-12-01

In this article, we explore potential of Exploding Wire Technique (EWT) to synthesize the copper nanoparticles using the copper metal in a plate and wire geometry. Rietveld refinement of X-ray diffraction (XRD) pattern of prepared material indicates presence of mixed phases of copper (Cu) and copper oxide (Cu2O). Agglomerates of copper and copper oxide comprised of ∼20 nm average size nanoparticles observed through high resolution transmission electron microscope (HRTEM) and energy dispersive x-ray (EDX) spectroscopy. Micro-Raman (μR) and Fourier transform infrared (FTIR) spectroscopies of prepared nanoparticles reveal existence of additional minority CuO phase, not determined earlier through XRD and TEM analysis. μR investigations vividly reveal cubic Cu2O and monoclinic CuO phases based on the difference of space group symmetries. In good agreement with μRaman analysis, FTIR stretching modes corresponding to Cu2-O and Cu-O were also distinguished. Investigations of μR and FTIR vibrational modes are in accordance and affirm concurrence of CuO phases besides predominant Cu and Cu2O phase. Quantum confinement effects along with increase of band gaps for direct and indirect optical transitions of Cu/Cu2O/CuO nanoparticles are reflected through UV-vis (UV-vis) spectroscopy. Photoluminescence (PL) spectroscopy spots the electronic levels of each phase and optical transitions processes occurring therein. Iterative X-ray photoelectron spectroscopy (XPS) fitting of core level spectra of Cu (2p3/2) and O (1s), divulges presence of Cu2+ and Cu+ in the lattice with an interesting evidence of O deficiency in the lattice structure and surface adsorption. Magnetic analysis illustrates that the prepared nanomaterial demonstrates ferromagnetic behaviour at room temperature.

The Effect of Organic Manure and Super Absorbent on Physiological and Biochemical Characteristics of Potato (Solanum tubersum, cv Marfona

Directory of Open Access Journals (Sweden)

N. Rashidi

2015-05-01

Full Text Available In order to investigate effect of organic manure and super absorbent on physiological and biochemical traits of potato (Solanum tubersum, cv Marfona, a split plot experiment was conducted as randomized complete block design with three replications at Research Farm, Agriculture College, University of Razi in 2010. Main factor included two levels of super absorbent A200 (0 and 70 Kg/ha, and split plot included nine levels (0, chemical fertilizer (according to soil test, granule chicken manure (1000 kg/ ha, common chicken manure (12 ton/ha, soil mix (1000 kg/ha, cow manure (20 ton/ha, vermicompost (20 ton/ha, compost (20 ton/ha and tea compost (soaking tubers and spraying at four times. Investigating physiological traits such as leaf chlorophyll index, chlorophyll florescence and stomata conductance showed that only leaf chlorophyll index was affected by superabsorbent (P < 0.01 and organic manure (P < 0.05, while stomata conductance wad significant under it’s interaction effect at (P < 0.05. Quality and biochemical traits show that phosphorous amount of tuber was significant in superabsorbent treatment in compare to control. Crude oil percentage, protein, fiber, starch, sugar, nitrogen, phosphorous and potassium content were not affected by organic manure. The highest amount of oil and fiber were obtained under compost and cow manure respectively. Sugar and nitrogen content were high under cow manure treatment. The highest amount of potassium and phosphorous content were belonging to chicken and Khakparvar manure respectively.

Taila Dāha (Cauterization with Oil an innovative approach in pilonidal sinus

Directory of Open Access Journals (Sweden)

Rabinarayan Tripathy

2016-01-01

Full Text Available Pilonidal sinus is a chronic inflammatory track in mid gluteal cleft usually associated with hairs with an incidence rate of twenty six per one lakh population. It is more prevalently seen in the natal cleft of hairy middle aged obese, males. Such type of non-healing tracts may be considered as Nāḍivraṇa (Sinuses and can either be treated by the conventional Kṣārasūtra (medicated seton therapy or contemporary treatment methods. Irrespective of whatsoever management protocol adopted, it inevitably needs long term hospitalisation and is associated with complications. A case of a 28 year old male patient, presenting with pain (within tolerable limits in the natal cleft and frequent occurrence of a pustule which burst out spontaneously on and off, diagnosed as pilonidal sinus (nāḍi vraṇa was treated with excision of tract and Tailadāha (thermal cauterization with hot oil with a combination of yaṣṭimadhu taila and powdered Copper Sulphate (CuSO4. Good haemostasis and uneventful wound healing with a minimally invasive and cost effective treatment was the outcome of study. This study represents an innovative treatment modality in pilonidal sinus.

Structure-activity correlations for TON, FER and MOR in the hydroisomerization of n-butane

NARCIS (Netherlands)

Pieterse, J.A.Z.; Seshan, Kulathuiyer; Lercher, J.A.

2000-01-01

n-Butane hydroconversion was studied over (Pt-loaded) molecular sieves with TON, FER, and MOR morphology. The conversion occurs via a complex interplay of mono- and bimolecular bifunctional acid mechanism and monofunctional platinum-catalyzed hydrogenolysis. Hydroisomerization occurs bimolecularly

Réponse de deux variétés de tournesol (Helianthus sp. à la fertilisation à base de fiente de poule sur un Hapli-Humic Ferralsol du Yongka Western Highlands Research Garden Park (YWHRGP Nkwen-Bamenda, Cameroun, Afrique centrale

Directory of Open Access Journals (Sweden)

Yerima, BPK.

2014-01-01

Full Text Available Response of Two Sunflower (Helianthus sp. Varieties to Poultry Manure Fertilization on a Hapli-Humic Ferralsol at the Yongka Western Highlands Research Garden-Park (YWHRGP Nkwen-Bamenda, Cameroon, Central Africa. An experiment on a Hapli-Humic Ferralsol was conducted at the YWHRGP, Nkwen-Bamenda, to evaluate the response of two sunflower varieties (Helianthus sp. to five levels of poultry manure (0; 1.2; 2.8; 4.2 and 5.6 Tons/ha. Italian White and African Giant varieties were used. The experiment was laid out in a randomized complete block design with three and six replications for African Giant and Italian White varieties, respectively. Poultry manure was analyzed and growth, development and yield parameters were collected. The acid soil (pH≤5.5 showed nutrient deficiencies. The poultry manure (pH=7.8 is rich in essential nutrients and had a significant effect on sunflower growth parameters. The 4.2 Tons/ha manure level maximised growth and yield parameters of the African Giant variety. For the Italian White variety, 5.6 Tons/ha manure level gave a head weight yield (0.74 Tons/ha lower than that of the African Giant (1.33 Tons/ha. Significant differences were also observed between the two varieties. However, the African Giant variety appears to be more adapted for seed production, while the Italian White variety appears to be best indicated for use as an ornamental plant or to produce cut flowers.

Litter Decomposition Rate of Karst Ecosystem at Gunung Cibodas, Ciampea Bogor Indonesia

Directory of Open Access Journals (Sweden)

Sethyo Vieni Sari

2016-05-01

Full Text Available The study aims to know the productivity of litter and litter decomposition rate in karst ecosystem. This study was conducted on three altitude of 200 meter above sea level (masl, 250 masl and 300 masl in karst ecosystem at Gunung Cibodas, Ciampea, Bogor. Litter productivity measurement performed using litter-trap method and litter-bag method was used to know the rate of decomposition. Litter productivity measurement results showed that the highest total of litter productivity measurement results was on altitude of 200 masl (90.452 tons/ha/year and the lowest was on altitude of 300 masl (25.440 tons/ha/year. The litter productivity of leaves (81.425 ton/ha/year showed the highest result than twigs (16.839 ton/ha/year, as well as flowers and fruits (27.839 ton/ha/year. The rate of decomposition was influenced by rainfall. The decomposition rate and the decrease of litter dry weight on altitude of 250 masl was faster than on the altitude of 200 masl and 300 masl. The dry weight was positively correlated to the rate of decomposition. The lower of dry weight would affect the rate of decomposition become slower. The average of litter C/N ratio were ranged from 28.024%--28.716% and categorized as moderate (>25. The finding indicate that the rate of decomposition in karst ecosystem at Gunung Cibodas was slow and based on C/N ratio of litter showed the mineralization process was also slow.

Tailoring Graphene Morphology and Orientation on Cu(100), Cu(110), and Cu(111)

Science.gov (United States)

Jacobberger, Robert; Arnold, Michael

2013-03-01

Graphene CVD on Cu is phenomenologically complex, yielding diverse crystal morphologies, such as lobes, dendrites, stars, and hexagons, of various orientations. We present a comprehensive study of the evolution of these morphologies as a function of Cu surface orientation, pressure, H2:CH4, and nucleation density. Growth was studied on ultra-smooth, epitaxial Cu films inside Cu enclosures to minimize factors that normally complicate growth. With low H2:CH4, Mullins-Sekerka instabilities propagate to form dendrites, indicating transport limited growth. In LPCVD, the dendrites extend hundreds of microns in the 100, 111, and 110 directions on Cu(100), (110), and (111) and are perturbed by twin boundaries. In APCVD, multiple preferred dendrite orientations exist. With increasing H2:CH4, the dendritic nature of growth is suppressed. In LPCVD, square, rectangle, and hexagon crystals form on Cu(100), (110) and (111), reflecting the Cu crystallography. In APCVD, the morphology becomes hexagonal on each surface. If given ample time, every growth regime yields high-quality monolayers with D:G Raman ratio rationally tailor the graphene crystal morphology and orientation.

The design of steel string crane with lifting capacity 10 tons

International Nuclear Information System (INIS)

Syamsurrijal Ramdja

2007-01-01

The steel string (sling) used for lift Crane of type of Overhead Travelling Crane, with capacities lifting 10 ton are designed. If compared to other string type, string of steel have some excellence. At this design, election of type of string become primary and the factor of safety become prima facie matter with pursuant to up to date standard. From made of design, is hence got by specification and age of steel string. (author)

Combined effect of organic manure and potassium on growth and yield of onion cv. BARI piaz-I

Directory of Open Access Journals (Sweden)

H.K. Barman

2013-06-01

Full Text Available An experiment was conducted to find out the combined effect of cowdung and potassium on the growth and yield of onion cv. BARI piaz-I at Horticulture Farm, Bangladesh Agricultural University, Mymensingh during the period from December 2010 to March 2011. The experiment was laid out in a randomized complete block design with three replications. The two factors experiment had four levels of cowdung, viz., 0, 5, 10 and 20 tons ha-1 and four levels of potassium, viz. 0, 50, 150 and 250 kg K ha-1. Doses of cowdung and potassium showed significant variation in respect of all the parameters studied. The combination of 10 tons cowdung and 250 kg K ha-1 gave the tallest plant (46.60 cm, the highest number of leaves plant-1 (6.40, the highest length of bulb (3.27 cm, the highest diameter of bulb (4.83 cm, individual weight of bulb (51.23 g, dry matter content (12.66% and yield of bulb ha-1 (12.83 tons; whereas the control treatment gave the shortest plant (38.15 cm, lowest number of leaves plant-1 (5.68, diameter of bulb (3.41, individual weight of bulb (35.65g and gave lowest bulb yield ha-1 (9.16 tons.

Cu-62, Cu-64 and Cu-66 production with 4.2 MeV deuterons

International Nuclear Information System (INIS)

Avila, Mario; Morales, J.R.; Riquelme, H.O.

1996-01-01

Full text: The natural copper irradiation with deuterons produces the Cu-62, Cu-64 and Cu-66 radionuclides. Of two radioisotopes, those with deficiencies in neutrons, are applied in nuclear medicine diagnostic processes, mainly for the nuclear characteristic of the decay modes. The positron emitters, of short life mean Cu-62 (9.1 min, β + ) and Cu(12.7 h), are radionuclides applied in radio pharmacological preparation for brain, core, blood flux studies. The radiochemical process consists in the de solution of the irradiated metallic copper target, in acid medium. The result solution, can be neutralized with a base or a buffer at wished pH. Using a deuteron beam of 4,2 ± 0,1 MeV energy has been obtained total yields of 1,103 ± 0,011 μCl/μAh medium for 62 Cu and of 0,148 ± 0,015 μCl/μAh for 64 Cu

Crystal structure of the HA3 subcomponent of Clostridium botulinum type C progenitor toxin.

Science.gov (United States)

Nakamura, Toshio; Kotani, Mao; Tonozuka, Takashi; Ide, Azusa; Oguma, Keiji; Nishikawa, Atsushi

2009-01-30

The Clostridium botulinum type C 16S progenitor toxin contains a neurotoxin and several nontoxic components, designated nontoxic nonhemagglutinin (HA), HA1 (HA-33), HA2 (HA-17), HA3a (HA-22-23), and HA3b (HA-53). The HA3b subcomponent seems to play an important role cooperatively with HA1 in the internalization of the toxin by gastrointestinal epithelial cells via binding of these subcomponents to specific oligosaccharides. In this study, we investigated the sugar-binding specificity of the HA3b subcomponent using recombinant protein fused to glutathione S-transferase and determined the three-dimensional structure of the HA3a-HA3b complex based on X-ray crystallography. The crystal structure was determined at a resolution of 2.6 A. HA3b contains three domains, domains I to III, and the structure of domain I resembles HA3a. In crystal packing, three HA3a-HA3b molecules are assembled to form a three-leaved propeller-like structure. The three HA3b domain I and three HA3a alternate, forming a trimer of dimers. In a database search, no proteins with high structural homology to any of the domains (Z score >10) were found. Especially, HA3a and HA3b domain I, mainly composed of beta-sheets, reveal a unique fold. In binding assays, HA3b bound sialic acid with high affinity, but did not bind galactose, N-acetylgalactosamine, or N-acetylglucosamine. The electron density of liganded N-acetylneuraminic acid was determined by crystal soaking. In the sugar-complex structure, the N-acetylneuraminic acid-binding site was located in the cleft formed between domains II and III of HA3b. This report provides the first determination of the three-dimensional structure of the HA3a-HA3b complex and its sialic acid binding site. Our results will provide useful information for elucidating the mechanism of assembly of the C16S toxin and for understanding the interactions with oligosaccharides on epithelial cells and internalization of the botulinum toxin complex.

Sr-containing hydroxyapatite: morphologies of HA crystals and bioactivity on osteoblast cells

Energy Technology Data Exchange (ETDEWEB)

Aina, Valentina [Department of Chemistry, Università degli Studi di Torino, Via P. Giuria 7, 10125 Torino (Italy); Centre of Excellence NIS (Nanostructured Interfaces and Surface) Università degli Studi di Torino (Italy); INSTM (Italian National Consortium for Materials Science and Technology), UdR Università di Torino (Italy); Bergandi, Loredana, E-mail: loredana.bergandi@unito.it [Department of Oncology, Università degli Studi di Torino, Via Santena 5/bis, 10126 Torino (Italy); Lusvardi, Gigliola; Malavasi, Gianluca [Department of Chemical and Geological Sciences, Università di Modena and Reggio Emilia, Via Campi 183, 41125 Modena (Italy); Imrie, Flora E.; Gibson, Iain R. [School of Medical Sciences, Institute of Medical Sciences, University of Aberdeen, Foresterhill, Aberdeen, AB25 2ZD (United Kingdom); Cerrato, Giuseppina [Department of Chemistry, Università degli Studi di Torino, Via P. Giuria 7, 10125 Torino (Italy); Centre of Excellence NIS (Nanostructured Interfaces and Surface) Università degli Studi di Torino (Italy); INSTM (Italian National Consortium for Materials Science and Technology), UdR Università di Torino (Italy); Ghigo, Dario [Department of Oncology, Università degli Studi di Torino, Via Santena 5/bis, 10126 Torino (Italy)

2013-04-01

A series of Sr-substituted hydroxyapatites (HA), of general formula Ca{sub (10−x)}Sr{sub x}(PO{sub 4}){sub 6}(OH){sub 2}, where x = 2 and 4, were synthesized by solid state methods and characterized extensively. The reactivity of these materials in cell culture medium was evaluated, and the behavior towards MG-63 osteoblast cells (in terms of cytotoxicity and proliferation assays) was studied. Future in vivo studies will give further insights into the behavior of the materials. A paper by Lagergren et al. (1975), concerning Sr-substituted HA prepared by a solid state method, reports that the presence of Sr in the apatite composition strongly influences the apatite diffraction patterns. Zeglinsky et al. (2012) investigated Sr-substituted HA by ab initio methods and Rietveld analyses and reported changes in the HA unit cell volume and shape due to the Sr addition. To further clarify the role played by the addition of Sr on the physico-chemical properties of these materials we prepared Sr-substituted HA compositions by a solid state method, using different reagents, thermal treatments and a multi-technique approach. Our results indicated that the introduction of Sr at the levels considered here does influence the structure of HA. There is also evidence of a decrease in the crystallinity degree of the materials upon Sr addition. The introduction of increasing amounts of Sr into the HA composition causes a decrease in the specific surface area and an enrichment of Sr-apatite phase at the surface of the samples. Bioactivity tests show that the presence of Sr causes changes in particle size and/or morphology during soaking in MEM solution; on the contrary the morphology of pure HA does not change after 14 days of reaction. The presence of Sr, as Sr-substituted HA and SrCl{sub 2,} in cultures of human MG-63 osteoblasts did not produce any cytotoxic effect. In fact, Sr-substituted HA increased the proliferation of osteoblast cells and enhanced cell differentiation: Sr in

Sr-containing hydroxyapatite: morphologies of HA crystals and bioactivity on osteoblast cells

International Nuclear Information System (INIS)

Aina, Valentina; Bergandi, Loredana; Lusvardi, Gigliola; Malavasi, Gianluca; Imrie, Flora E.; Gibson, Iain R.; Cerrato, Giuseppina; Ghigo, Dario

2013-01-01

A series of Sr-substituted hydroxyapatites (HA), of general formula Ca (10−x) Sr x (PO 4 ) 6 (OH) 2 , where x = 2 and 4, were synthesized by solid state methods and characterized extensively. The reactivity of these materials in cell culture medium was evaluated, and the behavior towards MG-63 osteoblast cells (in terms of cytotoxicity and proliferation assays) was studied. Future in vivo studies will give further insights into the behavior of the materials. A paper by Lagergren et al. (1975), concerning Sr-substituted HA prepared by a solid state method, reports that the presence of Sr in the apatite composition strongly influences the apatite diffraction patterns. Zeglinsky et al. (2012) investigated Sr-substituted HA by ab initio methods and Rietveld analyses and reported changes in the HA unit cell volume and shape due to the Sr addition. To further clarify the role played by the addition of Sr on the physico-chemical properties of these materials we prepared Sr-substituted HA compositions by a solid state method, using different reagents, thermal treatments and a multi-technique approach. Our results indicated that the introduction of Sr at the levels considered here does influence the structure of HA. There is also evidence of a decrease in the crystallinity degree of the materials upon Sr addition. The introduction of increasing amounts of Sr into the HA composition causes a decrease in the specific surface area and an enrichment of Sr-apatite phase at the surface of the samples. Bioactivity tests show that the presence of Sr causes changes in particle size and/or morphology during soaking in MEM solution; on the contrary the morphology of pure HA does not change after 14 days of reaction. The presence of Sr, as Sr-substituted HA and SrCl 2, in cultures of human MG-63 osteoblasts did not produce any cytotoxic effect. In fact, Sr-substituted HA increased the proliferation of osteoblast cells and enhanced cell differentiation: Sr in HA has a positive effect

Ici, la priorité est aux piétons / Pedestrians have the right of way at CERN

CERN Multimedia

2002-01-01

Au CERN, nous sommes tous piétons, très souvent automobilistes et parfois cyclistes. Mais peu importe notre moyen de locomotion si l'on reste vigilant et si l'on se rappelle que le piéton est un usager de la route à part entière, mais plus vulnérable. / At CERN, we are all pedestrians, often drivers, and occasionally cyclists. But our means of locomotion do no matter so long as we exercise caution and remember that a pedestrian has equal rights as a roa user, except than that he runs greater risks.

Cu-ZSM-5, Cu-ZSM-11, and Cu-ZSM-12 Catalysts for Direct NO Decomposition

DEFF Research Database (Denmark)

Kustova, Marina; Kustov, Arkadii; Christiansen, Sofie E.

2006-01-01

Cu-ZSM-5 has for many years been recognized as a unique catalyst for direct NO decomposition. Here, it is discovered that both Cu-ZSM-11 and Cu-ZSM-12 are about twice as active as Cu-ZSM-5. This difference is attributed to the active sites located almost exclusively in the straight zeolite pores...

Electromigration in Cu(Al) and Cu(Mn) damascene lines

Science.gov (United States)

Hu, C.-K.; Ohm, J.; Gignac, L. M.; Breslin, C. M.; Mittal, S.; Bonilla, G.; Edelstein, D.; Rosenberg, R.; Choi, S.; An, J. J.; Simon, A. H.; Angyal, M. S.; Clevenger, L.; Maniscalco, J.; Nogami, T.; Penny, C.; Kim, B. Y.

2012-05-01

The effects of impurities, Mn or Al, on interface and grain boundary electromigration (EM) in Cu damascene lines were investigated. The addition of Mn or Al solute caused a reduction in diffusivity at the Cu/dielectric cap interface and the EM activation energies for both Cu-alloys were found to increase by about 0.2 eV as compared to pure Cu. Mn mitigated and Al enhanced Cu grain boundary diffusion; however, no significant mitigation in Cu grain boundary diffusion was observed in low Mn concentration samples. The activation energies for Cu grain boundary diffusion were found to be 0.74 ± 0.05 eV and 0.77 ± 0.05 eV for 1.5 μm wide polycrystalline lines with pure Cu and Cu (0.5 at. % Mn) seeds, respectively. The effective charge number in Cu grain boundaries Z*GB was estimated from drift velocity and was found to be about -0.4. A significant enhancement in EM lifetimes for Cu(Al) or low Mn concentration bamboo-polycrystalline and near-bamboo grain structures was observed but not for polycrystalline-only alloy lines. These results indicated that the existence of bamboo grains in bamboo-polycrystalline lines played a critical role in slowing down the EM-induced void growth rate. The bamboo grains act as Cu diffusion blocking boundaries for grain boundary mass flow, thus generating a mechanical stress-induced back flow counterbalancing the EM force, which is the equality known as the "Blech short length effect."

HVOF-Sprayed Nano TiO2-HA Coatings Exhibiting Enhanced Biocompatibility

Science.gov (United States)

Lima, R. S.; Dimitrievska, S.; Bureau, M. N.; Marple, B. R.; Petit, A.; Mwale, F.; Antoniou, J.

2010-01-01

Biomedical thermal spray coatings produced via high-velocity oxy-fuel (HVOF) from nanostructured titania (n-TiO2) and 10 wt.% hydroxyapatite (HA) (n-TiO2-10wt.%HA) powders have been engineered as possible future alternatives to HA coatings deposited via air plasma spray (APS). This approach was chosen due to (i) the stability of TiO2 in the human body (i.e., no dissolution) and (ii) bond strength values on Ti-6Al-4V substrates more than two times higher than those of APS HA coatings. To explore the bioperformance of these novel materials and coatings, human mesenchymal stem cells (hMSCs) were cultured from 1 to 21 days on the surface of HVOF-sprayed n-TiO2 and n-TiO2-10 wt.%HA coatings. APS HA coatings and uncoated Ti-6Al-4V substrates were employed as controls. The profiles of the hMSCs were evaluated for (i) cellular proliferation, (ii) biochemical analysis of alkaline phosphatase (ALP) activity, (iii) cytoskeleton organization (fluorescent/confocal microscopy), and (iv) cell/substrate interaction via scanning electron microscopy (SEM). The biochemical analysis indicated that the hMSCs cultured on n-TiO2-10 wt.%HA coatings exhibited superior levels of bioactivity than hMSCs cultured on APS HA and pure n-TiO2 coatings. The cytoskeleton organization demonstrated a higher degree of cellular proliferation on the HVOF-sprayed n-TiO2-10wt.%HA coatings when compared to the control coatings. These results are considered promising for engineering improved performance in the next generation of thermally sprayed biomedical coatings.

Physical mechanisms of Cu-Cu wafer bonding

International Nuclear Information System (INIS)

Rebhan, B.

2014-01-01

Modern manufacturing processes of complex integrated semiconductor devices are based on wafer-level manufacturing of components which are subsequently interconnected. When compared with classical monolithic bi-dimensional integrated circuits (2D ICs), the new approach of three-dimensional integrated circuits (3D ICs) exhibits significant benefits in terms of signal propagation delay and power consumption due to the reduced metal interconnection length and allows high integration levels with reduced form factor. Metal thermo-compression bonding is a process suitable for 3D interconnects applications at wafer level, which facilitates the electrical and mechanical connection of two wafers even processed in different technologies, such as complementary metal oxide semiconductor (CMOS) and microelectromechanical systems (MEMS). Due to its high electrical conductivity, copper is a very attractive material for electrical interconnects. For Cu-Cu wafer bonding the process requires typically bonding for around 1 h at 400°C and high contact pressure applied during bonding. Temperature reduction below such values is required in order to solve issues regarding (i) throughput in the wafer bonder, (ii) wafer-to-wafer misalignment after bonding and (iii) to minimise thermo-mechanical stresses or device degradation. The aim of this work was to study the physical mechanisms of Cu-Cu bonding and based on this study to further optimise the bonding process for low temperatures. The critical sample parameters (roughness, oxide, crystallinity) were identified using selected analytical techniques and correlated with the characteristics of the bonded Cu-Cu interfaces. Based on the results of this study the impact of several materials and process specifications on the bonding result were theoretically defined and experimentally proven. These fundamental findings subsequently facilitated low temperature (LT) metal thermo-compression Cu-Cu wafer bonding and even room temperature direct

Determining the potential benefits for the freight carriage by road in Spain facing an increase in vehicles gvm 40 to 44 tons

Energy Technology Data Exchange (ETDEWEB)

Martinez Reguero, A.H.; Campos Cacheda, J.M.

2016-07-01

A very significant percentage of the products shipped by road in Spain using heavy goods vehicles (HGV) make 40 tons GVM (gross vehicle mass). Any changes aimed at increasing productivity in that vehicles category would result in a very positive way in the road freight transport market, by lowering transport costs, decreasing environmental costs, rationalizing the sector and improving logistics market. Therefore it is discussed here the improvement derived from the transfer of HGV that currently have a limitation of 40 tons GVM to a new limit of 44 tons GVM, establishing the potential benefits that would be set after the change. (Author)

Drought analysis in the Tons River Basin, India during 1969-2008

Science.gov (United States)

Meshram, Sarita Gajbhiye; Gautam, Randhir; Kahya, Ercan

2018-05-01

The primary focus of this study is the analysis of droughts in the Tons River Basin during the period 1969-2008. Precipitation data observed at four gauging stations are used to identify drought over the study area. The event of drought is derived from the standardized precipitation index (SPI) on a 3-month scale. Our results indicated that severe drought occurred in the Allahabad, Rewa, and Satna stations in the years 1973 and 1979. The droughts in this region had occurred mainly due to erratic behavior in monsoons, especially due to long breaks between monsoons. During the drought years, the deficiency of the annual rainfall in the analysis of annual rainfall departure had varied from -26% in 1976 to -60% in 1973 at Allahabad station in the basin. The maximum deficiency of annual and seasonal rainfall recorded in the basin is 60%. The maximum seasonal rainfall departure observed in the basin is in the order of -60% at Allahabad station in 1973, while maximum annual rainfall departure had been recorded as -60% during 1979 at the Satna station. Extreme dry events ( z score <-2) were detected during July, August, and September. Moreover, severe dry events were observed in August, September, and October. The drought conditions in the Tons River Basin are dominantly driven by total rainfall throughout the period between June and November.

La relación interpersonal en el aula: el caso del centro universitario de los Valles (CuValles) de la universidad de Guadalajara (México)

OpenAIRE

Mena Rodríguez, Esther

2017-01-01

En esta investigación que se presenta a continuación hemos intentado analizar el tipo de relaciones interpersonales que se dan en el aula y cuáles son las que favorecen el proceso de Enseñanza-Aprendizaje. Para responder a nuestro objetivo de investigación, nos hemos basado en el modelo original MITB (Model for Interpersonal Teacher Behaviour) operacionalizado en el QTI (Questionnaire on Teacher Interaction) de Wubbels, Créton y Hooymayers (1985), instrumento especialmente indicado para an...

Ag doped (Bi1.6Pb0.4Sr2CaCu2O8+δ textured rods

Directory of Open Access Journals (Sweden)

Díez, J. C.

2008-06-01

Full Text Available In this work, superconducting samples of (Bi1.6Pb0.4Sr2CaCu2O8+δ with Ag additions have been studied. (Bi1.6Pb0.4Sr2CaCu2O8+δ + x wt.% Ag (with x = 0, 1 and 3 powders were synthesized using a sol-gel method. The obtained powders were used as precursors to fabricate long textured cylindrical bars through a floating zone melting method. A drastic change on the microstructure has been found when comparing with undoped Bi2Sr2CaCu2O8+δ samples. The results showed that electrical resistivity at room temperature, critical current as well as flexural strength are improved when Ag is added to these Pb doped samples, while critical temperature does not change. On the other hand, it has been found that samples with composition (Bi1.6Pb0.4Sr2CaCu2O8+δ + Ag shown E-I curves with very high sharpness values on the zone of the superconducting to normal transition, reaching n-values (E∼In as high as 45 at 65K.Se han preparado polvos cerámicos de composición (Bi1.6Pb0.4Sr2CaCu2O8+δ + x % Ag en peso (con x = 0, 1 y 3 mediante un proceso sol-gel. Estos polvos se han utilizado para fabricar precursores que se texturaron por medio del método de fusión zonal flotante. Se ha encontrado un gran cambio en la microestructura cuando se compara con muestras de composición pura Bi2Sr2CaCu2O8+δ. Tanto la resistividad eléctrica a temperatura ambiente, como la corriente crítica, así como la resistencia a flexión se mejoran cuando la Ag se adiciona a estas muestras dopadas con Pb, mientras que no se observa cambio en la temperatura crítica. Por otra parte, se ha encontrado que las muestras de composición (Bi1.6Pb0.4Sr2CaCu2O8+δ + Ag presentan una gran pendiente de la curva E-I en la zona de transición entre el estado superconductor y el estado normal. Con estas composiciones, se han encontrado valores de n (E∼In de hasta 45 a 65K.

N-Urea Efficiency In Lowland Rice Applied With Azolla

International Nuclear Information System (INIS)

Rasjid, Havid; Sisworo, E.L.; Wemay, Y.; Sisworo, W.H.

2000-01-01

Two N-fertilizer experiments have been conducted using urea tablet and prill urea combined with Azolla application. Twelve treatments have been tested using 2 rice varieties namely Atomita-4 and IR-64. To enable the determination of N-urea efficiency 15 N labelled urea was used. The experiments were conducted in the dry and wet season (DS and WS) 1994/1995 at the experimental station, pusaka negara, Subang West Java. Data obtained from the two experiments showed that the highest N-urea efficiency was found in Atomita-4 applied with urea-tablet (DS=46,1%, WS= 35,8%). Letting the Azolla grow during one lowland rice growth period could increase the N-urea prill efficiency (±5%) compared when no azolla was applied. Apparently Atomita-4 could use N-urea more efficiently compared to IR-64, showing higher grain yield (atomita-4 DS=6.2 ton ha -1 WS=5.9 ton ha -1 ) vs IR-64 (DS=5.8 ton ha -1 , WS=5.3 ton ha -1 ). Decreasing the levels of TSP not influence to the urea efficiency at the DS and WS

Efecto de diferentes distancias de siembra sobre la producción de biomasa del frijol terciopelo (Stizolobium deeringianum en el departamento de Masaya

Directory of Open Access Journals (Sweden)

Roberto Tapia Morales

2002-06-01

Full Text Available El presente trabajo tuvo como objetivo, evaluar en términos biológicos el efecto de diferentes distancias de siembra entre plantas sobre la producción de biomasa en base verde y seca del frijol terciopelo (Stizolobium deeringianum. Los resultados evidencian que las diferentes distancias de siembra, tuvieron efecto estadísticamente significativo en la producción de biomasa de frijol terciopelo en base verde y seca. Los valores de producción de biomasa más altos en cuanto a producción de biomasa corresponden a aquellos tratamientos Cuya distancias entre planta son iguales a 0.25 m y 0.50 m, obteniéndose 15.3 ton/ha y 12.3 ton/ha en base verde respectivamente y 2.43 ton/ha y 2.025 ton/ha en base seca respectivamente. En lo que respecta a la capacidad de rebrote se demostró que a una altura de corte inferior a 10 cm el frijol terciopelo no es eficiente, ya que en ninguno de los diferentes tratamientos una vez realizado el primer corte se encontraron plantas en estado de rebrote.

Para una reescritura de la filosofía: conciencia y mecánica cuántica

Directory of Open Access Journals (Sweden)

Víctor Tapia

2000-07-01

Full Text Available A partir de este pretencioso título pretendo mostrar algunos desarrollos recientes de la mecánica cuántica con respecto al problema de la conciencia, la mente, el conocimiento, la voluntad, etc., desde el limitado punto de vista de un intruso curioso. El enfoque que ha empezado a tomar forma hace necesario reconsiderar todas nuestras ideas anteriores con respecto a la concepción del mundo.

Antigenic properties of a transport-competent influenza HA/HIV Env chimeric protein

International Nuclear Information System (INIS)

Ye Ling; Sun Yuliang; Lin Jianguo; Bu Zhigao; Wu Qingyang; Jiang, Shibo; Steinhauer, David A.; Compans, Richard W.; Yang Chinglai

2006-01-01

The transmembrane subunit (gp41) of the HIV Env glycoprotein contains conserved neutralizing epitopes which are not well-exposed in wild-type HIV Env proteins. To enhance the exposure of these epitopes, a chimeric protein, HA/gp41, in which the gp41 of HIV-1 89.6 envelope protein was fused to the C-terminus of the HA1 subunit of the influenza HA protein, was constructed. Characterization of protein expression showed that the HA/gp41 chimeric proteins were expressed on cell surfaces and formed trimeric oligomers, as found in the HIV Env as well as influenza HA proteins. In addition, the HA/gp41 chimeric protein expressed on the cell surface can also be cleaved into 2 subunits by trypsin treatment, similar to the influenza HA. Moreover, the HA/gp41 chimeric protein was found to maintain a pre-fusion conformation. Interestingly, the HA/gp41 chimeric proteins on cell surfaces exhibited increased reactivity to monoclonal antibodies against the HIV Env gp41 subunit compared with the HIV-1 envelope protein, including the two broadly neutralizing monoclonal antibodies 2F5 and 4E10. Immunization of mice with a DNA vaccine expressing the HA/gp41 chimeric protein induced antibodies against the HIV gp41 protein and these antibodies exhibit neutralizing activity against infection by an HIV SF162 pseudovirus. These results demonstrate that the construction of such chimeric proteins can provide enhanced exposure of conserved epitopes in the HIV Env gp41 and may represent a novel vaccine design strategy for inducing broadly neutralizing antibodies against HIV

Carbon Supported Oxide-Rich Pd-Cu Bimetallic Electrocatalysts for Ethanol Electrooxidation in Alkaline Media Enhanced by Cu/CuOx

Directory of Open Access Journals (Sweden)

Zengfeng Guo

2016-04-01

Full Text Available Different proportions of oxide-rich PdCu/C nanoparticle catalysts were prepared by the NaBH4 reduction method, and their compositions were tuned by the molar ratios of the metal precursors. Among them, oxide-rich Pd0.9Cu0.1/C (Pd:Cu = 9:1, metal atomic ratio exhibits the highest electrocatalytic activity for ethanol oxidation reaction (EOR in alkaline media. X-ray photoelectron spectroscopy (XPS and high resolution transmission electron microscopy (HRTEM confirmed the existence of both Cu and CuOx in the as-prepared Pd0.9Cu0.1/C. About 74% of the Cu atoms are in their oxide form (CuO or Cu2O. Besides the synergistic effect of Cu, CuOx existed in the Pd-Cu bimetallic nanoparticles works as a promoter for the EOR. The decreased Pd 3d electron density disclosed by XPS is ascribed to the formation of CuOx and the spill-over of oxygen-containing species from CuOx to Pd. The low Pd 3d electron density will decrease the adsorption of CH3COads intermediates. As a result, the electrocatalytic activity is enhanced. The onset potential of oxide-rich Pd0.9Cu0.1/C is negative shifted 150 mV compared to Pd/C. The oxide-rich Pd0.9Cu0.1/C also exhibited high stability, which indicated that it is a candidate for the anode of direct ethanol fuel cells (DEFCs.

Characterization of Three Novel Fatty Acid- and Retinoid-Binding Protein Genes (Ha-far-1, Ha-far-2 and Hf-far-1 from the Cereal Cyst Nematodes Heterodera avenae and H. filipjevi.

Directory of Open Access Journals (Sweden)

Fen Qiao

Full Text Available Heterodera avenae and H. filipjevi are major parasites of wheat, reducing production worldwide. Both are sedentary endoparasitic nematodes, and their development and parasitism depend strongly on nutrients obtained from hosts. Secreted fatty acid- and retinol-binding (FAR proteins are nematode-specific lipid carrier proteins used for nutrient acquisition as well as suppression of plant defenses. In this study, we obtained three novel FAR genes Ha-far-1 (KU877266, Ha-far-2 (KU877267, Hf-far-1 (KU877268. Ha-far-1 and Ha-far-2 were cloned from H. avenae, encoding proteins of 191 and 280 amino acids with molecular masses about 17 and 30 kDa, respectively and sequence identity of 28%. Protein Blast in NCBI revealed that Ha-FAR-1 sequence is 78% similar to the Gp-FAR-1 protein from Globodera pallida, while Ha-FAR-2 is 30% similar to Rs-FAR-1 from Radopholus similis. Only one FAR protein Hf-FAR-1was identified in H. filipjevi; it had 96% sequence identity to Ha-FAR-1. The three proteins are alpha-helix-rich and contain the conserved domain of Gp-FAR-1, but Ha-FAR-2 had a remarkable peptide at the C-terminus which was random-coil-rich. Both Ha-FAR-1 and Hf-FAR-1 had casein kinase II phosphorylation sites, while Ha-FAR-2 had predicted N-glycosylation sites. Phylogenetic analysis showed that the three proteins clustered together, though Ha-FAR-1 and Hf-FAR-1 adjoined each other in a plant-parasitic nematode branch, but Ha-FAR-2 was distinct from the other proteins in the group. Fluorescence-based ligand binding analysis showed the three FAR proteins bound to a fluorescent fatty acid derivative and retinol and with dissociation constants similar to FARs from other species, though Ha-FAR-2 binding ability was weaker than that of the two others. In situ hybridization detected mRNAs of Ha-far-1 and Ha-far-2 in the hypodermis. The qRT-PCR results showed that the Ha-far-1and Ha-far-2 were expressed in all developmental stages; Ha-far-1 expressed 70 times more

Characterization of Three Novel Fatty Acid- and Retinoid-Binding Protein Genes (Ha-far-1, Ha-far-2 and Hf-far-1) from the Cereal Cyst Nematodes Heterodera avenae and H. filipjevi.

Science.gov (United States)

Qiao, Fen; Luo, Lilian; Peng, Huan; Luo, Shujie; Huang, Wenkun; Cui, Jiangkuan; Li, Xin; Kong, Lingan; Jiang, Daohong; Chitwood, David J; Peng, Deliang

2016-01-01

Heterodera avenae and H. filipjevi are major parasites of wheat, reducing production worldwide. Both are sedentary endoparasitic nematodes, and their development and parasitism depend strongly on nutrients obtained from hosts. Secreted fatty acid- and retinol-binding (FAR) proteins are nematode-specific lipid carrier proteins used for nutrient acquisition as well as suppression of plant defenses. In this study, we obtained three novel FAR genes Ha-far-1 (KU877266), Ha-far-2 (KU877267), Hf-far-1 (KU877268). Ha-far-1 and Ha-far-2 were cloned from H. avenae, encoding proteins of 191 and 280 amino acids with molecular masses about 17 and 30 kDa, respectively and sequence identity of 28%. Protein Blast in NCBI revealed that Ha-FAR-1 sequence is 78% similar to the Gp-FAR-1 protein from Globodera pallida, while Ha-FAR-2 is 30% similar to Rs-FAR-1 from Radopholus similis. Only one FAR protein Hf-FAR-1was identified in H. filipjevi; it had 96% sequence identity to Ha-FAR-1. The three proteins are alpha-helix-rich and contain the conserved domain of Gp-FAR-1, but Ha-FAR-2 had a remarkable peptide at the C-terminus which was random-coil-rich. Both Ha-FAR-1 and Hf-FAR-1 had casein kinase II phosphorylation sites, while Ha-FAR-2 had predicted N-glycosylation sites. Phylogenetic analysis showed that the three proteins clustered together, though Ha-FAR-1 and Hf-FAR-1 adjoined each other in a plant-parasitic nematode branch, but Ha-FAR-2 was distinct from the other proteins in the group. Fluorescence-based ligand binding analysis showed the three FAR proteins bound to a fluorescent fatty acid derivative and retinol and with dissociation constants similar to FARs from other species, though Ha-FAR-2 binding ability was weaker than that of the two others. In situ hybridization detected mRNAs of Ha-far-1 and Ha-far-2 in the hypodermis. The qRT-PCR results showed that the Ha-far-1and Ha-far-2 were expressed in all developmental stages; Ha-far-1 expressed 70 times more than Ha-far-2 in

Initial Response of Pine Seedlings and Weeds to Dried Sewage Sludge in Rehabilitation of an Eroded Forest Site

Science.gov (United States)

Charles R. Berry

1977-01-01

Dried sewage sludge was applied at rates of 0, 17, 34, and 69 metric tons/ha on a badly eroded forest site in the Piedmont region of northeast Georgia. Production of weed bio mass varied directly with amount of sludge applied. Heigh growth for both shortleafand loblolly pine seedlings appeared to be greater on plots receiving 17 metric tons of sludge/ha, bu differences...

Comportement du béton à l'eau de mer. Synthèse bibliographique Concrete Behavior in Marine Environment. a Review Paper

Directory of Open Access Journals (Sweden)

Lesage J.

2006-11-01

Full Text Available Depuis quelques années, dans l'élaboration de structures destinées à l'exploration et à l'exploitation des hydrocarbures en mer, le choix se porte parfois sur les structures en béton plutôt que sur les structures en acier, en particulier dans les zones difficiles de la mer du Nord. C'est pourquoi il nous a semblé intéressant de faire le point des connaissances actuelles sur le comportement du béton à l'eau de mer. Les problèmes les plus importants se situent au niveau de la zone de marnage, c'est-à-dire la zone où le béton est alternativement immergé. Ils sont de tous ordres : contraintes mécaniques avec érosion et cavitation, action capillaire de l'eau avec alternance d'humidification et de séchage, action du gel et du dégel. Les moyens de lutte ne manquent pas : constructions massives, voire surdimensionnées, résistant au choc, choix des formes, mise en aeuvre soignée d'un béton de qualité riche en ciment, correctement dosé en agrégats, dur, dense, compact, imperméable; introduction dans le béton d'un entraineur d'air pour diminuer les effets du gel. L'utilisation d'un ciment prise mer et le choix d'un rapport eau/ciment voisin de 0,45 sont hautement recommandés. Quant à la corrosion, elle concerne les structures en béton à tous les niveaux, aussi bien dans la zone immergée en continu que dans la zone alternativement immergée. L'attaque du béton par les sulfates contenus dans l'eau de mer conduit à la formation de sels de Candlot qui provoquent une dégradation du béton. Le remède consiste à limiter la teneur en aluminate tricalcique du ciment. L'attaque des aciers de renfort par les chlorures a fait l'objet de nombreuses études: la solution consiste surtout à protéger les aciers par galvanisation ou protection cathodique. D'une manière générale, le béton placé dans ce milieu agressif que constitue l'eau de mer subit des contraintes mécaniques et physicochimiques importantes, mais on sait en g

Highly charged swelling mica reduces Cu bioavailability in Cu-contaminated soils

Energy Technology Data Exchange (ETDEWEB)

Stuckey, Jason W. [Department of Crop and Soil Sciences, Pennsylvania State University, 116 ASI Building, University Park, PA 16802 (United States); Neaman, Alexander [Facultad de Agronomia, P. Universidad Catolica de Valparaiso, Centro Regional de Estudios en Alimentos Saludables (Chile); Ravella, Ramesh; Komarneni, Sridhar [Department of Crop and Soil Sciences, Pennsylvania State University, 116 ASI Building, University Park, PA 16802 (United States); Martinez, Carmen Enid [Department of Crop and Soil Sciences, Pennsylvania State University, 116 ASI Building, University Park, PA 16802 (United States)], E-mail: cem17@psu.edu

2009-01-15

This is the first test of a highly charged swelling mica's (Na-2-mica) ability to reduce the plant-absorbed Cu in Cu-contaminated soils from Chile. Perennial ryegrass (Lolium perenne L.) was grown in two acid soils (Sector 2: pH 4.2, total Cu = 172 mg Cu kg{sup -1} and Sector 3: pH 4.2, total Cu = 112 mg Cu kg{sup -1}) amended with 0.5% and 1% (w/w) mica, and 1% (w/w) montmorillonite. At 10 weeks of growth, both mica treatments decreased the shoot Cu of ryegrass grown in Sector 2 producing shoot Cu concentrations above 21-22 mg Cu kg{sup -1} (the phytotoxicity threshold for that species), yet the mica treatments did not reduce shoot Cu concentrations when grown in Sector 3, which were at a typical level. The mica treatments improved shoot growth in Sector 3 by reducing free and extractable Cu to low enough levels where other nutrients could compete for plant absorption and translocation. In addition, the mica treatments improved root growth in both soils, and the 1% mica treatment reduced root Cu in both soils. This swelling mica warrants further testing of its ability to assist re-vegetation and reduce Cu bioavailability in Cu-contaminated surface soils. - In situ remediation of Cu-contaminated soils with a synthetic mica (Na-2-mica) will aid in re-vegetative efforts.

Study of calibration equations of {sup 137}Cs methodology for soil erosion determination; Estudo de equacoes de calibracao para metodologia do {sup 137}Cs de determinacao da erosao de solos

Energy Technology Data Exchange (ETDEWEB)

Santos, Elias Antunes dos

2001-02-01

Using the method of {sup 137} Cs and gamma-ray spectrometry, soil samples of two plots erosion were studied at Londrina city. the soil class studied was a dystrophic dark red soil (LRd), with erosion indexes measured by Agronomic Institute of Parana State (IAPAR) using a conventional method, since 1976. Through the percentage reduction of {sup 137} Cs related to the reference site, the soil losses were calculated using the proportional, mass balance and profile distribution models. Making the correlation between the {sup 137} Cs concentrations and the erosion measured by IAPAR, two calibration equations were obtained and applied to the data set measured in the basin of the Unda river and compared to those models in the literature. As reference region, was chosen a natural forest located close to the plots. The average inventory of {sup 137} Cs was 555{+-} 16 Bq.m{sup -2}. The inventories of the erosion plots varied from 112 to 136 Bq.m{sup -2} for samples collected until 30 cm depth. The erosion rates estimated by the models varied from 64 to 85 ton.ha{sup -1}.yr{sup -1} for the proportional and profile distribution models, respectively, and 137 to 165 ton.ha{sup -1} for the mass balance model, while the measured erosion obtained by IAPAR was 86 ton.ha{sup -1}.yr{sup -1}. From the two calibration equations obtained, the one that take into account the {sup 137} Cs distribution with the soil profile was that showed the best consistence with the erosion rated for the basin of the Unda river (same soil class) in the range from 4 to 48 ton.ha{sup -1}.yr{sup -1}, while the proportional and profile distribution models applied rates from 7 to 45 ton.ha{sup -1}.yr{sup -1} and 6 to 69 ton.ha{sup -1}.yr{sup -1}, respectively. (author)

Punicalagin Green Functionalized Cu/Cu2O/ZnO/CuO Nanocomposite for Potential Electrochemical Transducer and Catalyst

Science.gov (United States)

Fuku, X.; Kaviyarasu, K.; Matinise, N.; Maaza, M.

2016-09-01

A novel ternary Punica granatum L-Cu/Cu2O/CuO/ZnO nanocomposite was successfully synthesised via green route. In this work, we demonstrate that the green synthesis of metal oxides is more viable and facile compare to other methods, i.e., physical and chemical routes while presenting a potential electrode for energy applications. The prepared nanocomposite was characterised by both microscopic and spectroscopic techniques. High-resolution scanning electron microscopy (HRSEM) and X-ray diffraction (XRD) techniques revealed different transitional phases with an average nanocrystallite size of 29-20 mm. It was observed that the nanocomposites changed from amorphous-slightly crystalline Cu/Cu2O to polycrystalline Cu/Cu2O/CuO/ZnO at different calcination temperatures (room temperature-RT- 600 °C). The Cu/Cu2O/ZnO/CuO metal oxides proved to be highly crystalline and showed irregularly distributed particles with different sizes. Meanwhile, Fourier transform infrared (FTIR) spectroscopy confirmed the purity while together with ultraviolet-visible (UV-Vis) spectroscopy proved the proposed mechanism of the synthesised nanocomposite. UV-Vis showed improved catalytic activity of the prepared metal oxides, evident by narrow band gap energy. The redox and electrochemical properties of the prepared nanocomposite were achieved by cyclic voltammetry (CV), electrochemical impedance (EIS) and galvanostatic charge-discharge (GCD). The maximum specific capacitance ( C s) was calculated to be 241 F g-1 at 50 mV s-1 for Cu/Cu2O/CuO/ZnO nanoplatelets structured electrode. Moreover, all the CuO nanostructures reveal better power performance, excellent rate as well as long term cycling stability. Such a study will encourages a new design for a wide spectrum of materials for smart electronic device applications.

Projects of SOS FAIM

Directory of Open Access Journals (Sweden)

Mees, M.

1985-01-01

Full Text Available In Ivory Coast, the freshwater fishculture in rural areas is mainly on a small scale. This type of breeding in ponds (2 to 4 ares yields on an average 3 metric tons of fish/ha/year and represents only an activity with self-consumption of products. The yield in intensive pond fishculture Tilapia nilotica is on an average 6 to 7 metric tons/ha/year but yields bigger than 10 metric tons/ha/year are not uncommon. The intensive fishculture in floating cages, requiring a minor investment but a more improved formation than in fischculture, yields on an average about 30 to 40 kg/m3/year. However the effective development of this activity rests on the resolution of problems like the sufficient fry production, the feeding and the commercialization.

Impression on Agricultural Development in Rwanda

Directory of Open Access Journals (Sweden)

Fromen, D.

1985-01-01

Full Text Available In Ivory Coast, the freshwater fishculture in rural areas is mainly on a small scale. This type of breeding in ponds (2 to 4 ares yields on an average 3 metric tons of fish/ha/year and represents only an activity with self-consumption of products. The yield in intensive pond fishculture Tilapia nilotica is on an average 6 to 7 metric tons/ha/year but yields bigger than 10 metric tons/ha/year are not uncommon. The intensive fishculture in floating cages, requiring a minor investment but a more improved formation than in fischculture, yields on an average about 30 to 40 kg/m3/year. However the effective development of this activity rests on the resolution of problems like the sufficient fry production, the feeding and the commercialization.

Cu-62, Cu-64 and Cu-66 production with 4.2 MeV deuterons; Produccion de {sup 62} Cu y {sup 64} Cu con deuterones de 4,2 MeV

Energy Technology Data Exchange (ETDEWEB)

Avila, Mario; Morales, J R; Riquelme, H O [Chile Univ., Santiago (Chile). Facultad de Ciencias. Dept. de Fisica

1997-12-31

Full text: The natural copper irradiation with deuterons produces the Cu-62, Cu-64 and Cu-66 radionuclides. Of two radioisotopes, those with deficiencies in neutrons, are applied in nuclear medicine diagnostic processes, mainly for the nuclear characteristic of the decay modes. The positron emitters, of short life mean Cu-62 (9.1 min, {beta}{sup +}) and Cu(12.7 h), are radionuclides applied in radio pharmacological preparation for brain, core, blood flux studies. The radiochemical process consists in the de solution of the irradiated metallic copper target, in acid medium. The result solution, can be neutralized with a base or a buffer at wished pH. Using a deuteron beam of 4,2 {+-} 0,1 MeV energy has been obtained total yields of 1,103 {+-} 0,011 {mu}Cl/{mu}Ah medium for 62 Cu and of 0,148 {+-} 0,015 {mu}Cl/{mu}Ah for 64 Cu.

Improvement in maize (zea mays l) growth and quality through integrated use of biochar

International Nuclear Information System (INIS)

Ali, K.; Shah, F.; Shehzad, A.; Munsif, F.; Mian, A.A.

2017-01-01

To evaluate the potential use of biochar in crop production, two years experiments were conducted in 2013 and 2014. The experiment consisted of three factors namely: (1) Biochar (0, 25 and 50 ton ha-1), (2) FYM (5 and 10 ton ha-1) and (3) nitrogen (75 and 150 kg ha-1). A control treatment (no application of either treatment) was included in the experiment for comparison. All the treatments were replicated three time in RCB design at New Developmental Farm of the University of Agriculture Peshawar Pakistan. Experimental evidence indicated that BC, FYM and N significantly delayed all growth stages of maize such as days to taseling, silking and maturity. Biochar application significantly improved maize oil content by 12 and 29% over no BC plots (plots receiving other treatments) and control plots respectively. An increase of 27% and decrease of 11% was observed in maize protein and starch content in BC treated plots over control. FYM application of 10 ton ha-1 improved maize protein content by 12% but reduced oil content by 15% over 5 ton FYM ha-1. Likewise, N application resulted in higher protein content and starch content but reduced oil content significantly. Overall, application of BC showed convincing results as sole application of N and FYM, however, problems associated with BC production in Pakistan are needed to be addressed in future research. (author)

Comportement d'un béton à hautes performances à base de laitier ...

African Journals Online (AJOL)

L'utilisation de béton à hautes performances (BHP) intégrant des ajouts cimentaires comme les cendres volantes, les fumées de silice ou le laitier hydraulique ... armatures qui sont, à leur tour attaquées. Il est possible de modifier la ... refroidissement brutal par l'eau sous pression, c'est un sable de granulométrie 0/5 mm.

Preparation of conductive Cu patterns by directly writing using nano-Cu ink

Energy Technology Data Exchange (ETDEWEB)

Li, Wei [School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Li, Wenjiang; Wei, Jun [School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384 (China); Tan, Junjun [School of Chemical and Materials and Engineering, Hubei University of Technology, Hubei 435003 (China); Chen, Minfang, E-mail: mfchentj@126.com [School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384 (China)

2014-07-01

Conductive and air-stable Cu patterns were directly made on ordinary photo paper using a roller pen filled with nano-Cu ink, which was mainly composed of metallic Cu nanoparticles (NPs) capped with poly(N-vinylpyrrolidone) (PVP). The nano-Cu NPs were obtained via the reduction of Cu{sup 2+} ions by using an excess of hydrazine and PVP. The low sintering temperature (160 °C) in Ar atmosphere played an important role for the preparation of air-stable Cu patterns. The conductivity of a radio-frequency identification antenna made from nano-Cu ink was tested by a lamp, and its resistivity achieved 13.4 ± 0.4 μΩ cm. The Cu NPs were confirmed by means of X-ray powder diffraction and X-ray photoelectron spectra, and the Cu patterns were characterized by scanning electron microscopy and energy dispersive X-ray spectrometry. A mechanism for the high conductivity of the Cu pattern made from Cu NPs is proposed. - Highlights: • The synthesis of pure Cu is related to the reducing agent and capping agent. • The sintering under Ar atmosphere prevents Cu pattern's rapid oxidation. • The formation of the bulk Cu decreases the resistivity of the Cu pattern.

Cu/Cu{sub 2}O/CuO loaded on the carbon layer derived from novel precursors with amazing catalytic performance

Energy Technology Data Exchange (ETDEWEB)

Zhao, Xiaoli, E-mail: zhaoxiaoli_zxl@126.com [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Tan, Yixin [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China); Wu, Fengchang, E-mail: wu_fengchang@126.com [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Niu, Hongyun [State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China); Tang, Zhi [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Cai, Yaqi [State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China); Giesy, John P. [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Department of Veterinary Biomedical Sciences and Toxicology Centre, University of Saskatchewan, Saskatoon, Saskatchewan (Canada)

2016-11-15

A simple, novel method for synthesis of Cu/Cu{sub 2}O/CuO on surfaces of carbon (Cu/Cu{sub 2}O/CuO@C) as a non-noble-metal catalyst for reduction of organic compounds is presented. Compared with noble metals, Cu/Cu{sub 2}O/CuO@C particles are more efficient and less expensive. Characterization of the Cu/Cu{sub 2}O/CuO@C composites by high-resolution transmission electron microscope (HRTEM), x-ray diffraction (XRD), infrared spectroscopy and Raman analysis, revealed that it was composed of graphitized carbon with numerous nanoparticles (100 nm in diameter) of Cu/CuO/Cu{sub 2}O that were uniformly distributed on internal and external surfaces of the carbon support. Gallic acid (GA) has been used as both organic ligand and carbon precursor with metal organic frameworks (MOFs) as the sacrificial template and metal oxide precursor in this green synthesis. The material combined the advantages of MOFs and Cu-containing materials, the porous structure provided a large contact area and channels for the pollutions, which results in more rapid catalytic degradation of pollutants and leads to greater efficiency of catalysis. The material gave excellent catalytic performance for organic dyes and phenols. In this study, Cu/Cu{sub 2}O/CuO@C was used as catalytic to reduce 4-NP, which has been usually adopted as a model reaction to check the catalytic ability. Catalytic experiment results show that 4-NP was degraded approximately 3 min by use of 0.04 mg of catalyst and the conversion of pollutants can reach more than 99%. The catalyst exhibited little change in efficacy after being utilized five times. Rates of degradation of dyes, such as Methylene blue (MB) and Rhodamine B (RhB) and phenolic compounds such as O-Nitrophenol (O-NP) and 2-Nitroaniline (2-NA) were all similar. - Highlights: • We present an effective catalyst for reductive degradation of organic dyes and phenols in water. • Compared with noble metals, Cu/Cu{sub 2}O/CuO@C particles are more efficient and less

Fabrication and evaluation of porous Ti–HA bio-nanomaterial by leaching process

Directory of Open Access Journals (Sweden)

A.M. Omran

2015-05-01

Full Text Available A porous surface of Ti–HA composite was successfully fabricated by pulsed current activated sintering (PCAS, followed by leaching using diluted H3PO4. The Ti and HA powders were mixed at different contents of the HA, Ti-5, 10, 30 and 40 wt% HA powders. The mixed powders were pressed in a coated graphite die using pulsed current activated sintering (PCAS under pressure of 60 MPa at temperature of 1000 °C for 5 min. The sintered Ti–HA specimens were immersed in the eight kinds of leaching solutions at room temperature for 24 h. The leached specimen’s surfaces were characterized using XRD, SEM, EDX and Rockwell hardness. The XRD patterns after sintering show that many phases were detected at the sintered specimen surfaces such as; Ti2O, CaO, CaTiO3, TixPy in addition to the remaining Ti and HA. Furthermore, the high concentration H3PO4 leaching solution is more efficient than the low concentration. Also the produced porous surfaces of Ti–HA materials containing more than 30% HA have a low relative density and hardness than the commercial Ti–6Al–4V ELI alloy. In a word, the presence of porous surface coated by HA will promote the nucleation of the biological apatite created with the human tissue and increase the bonding between them. So, the produced porous materials are considered so easy for the muscle cells to permeate after transplanted with high coherence.

Tonometer calibration in Brasília, Brazil Calibragem de tonômetros em Brasília, Brasil

Directory of Open Access Journals (Sweden)

Fernanda Pires da Silva Abrão

2009-06-01

Full Text Available PURPOSE: To determine calibration errors of Goldmann applanation tonometers in ophthalmic clinics of Brasília, Brazil, and correlate the findings with variables related to tonometers model and utilization. METHODS: Tonometers from ophthalmic clinics in Brasília, Brazil, were checked for calibration errors. A standard Goldmann applanation tonometer checking tool was used to asses the calibration error. Only one trained individual made all verifications, with a masked reading of the results. Data on the model, age, daily use, frequency of calibration checking and the nature of the ophthalmic department - private or public - were collected and correlated with the observed errors. RESULTS: One hundred tonometers were checked for calibration. Forty seven percent (47/100 were out of 1 mmHg range at least at one point checking. Tonometers mounted to slit lamp, with less than 5 years, used in less than 20 patients daily, that had a calibration check on a yearly basis, and those from private office exhibit a lower rate of inaccuracy, but only the first variable was statistically significant. Sixty one percent of tonometers on public hospitals were out of calibration. CONCLUSION: Calibration of tonometers in the capital of Brazil is poor; those from general hospitals are worst, and this fact can lead to inaccurate detection and assessment of glaucoma patients, overall in the population under government assistance.OBJETIVOS: Determinar os erros de calibração dos tonômetros de aplanação de Goldmann em clínicas oftalmológicas de Brasília, Brasil, e correlacioná-los a variáveis relativas ao modelo e à utilização dos aparelhos. MÉTODOS: Tonômetros de clínicas oftalmológicas de Brasília tiveram a calibragem aferida usando um cilindro padrão fornecido pelo fabricante dos aparelhos. Todas as aferições foram realizadas por um só examinador previamente treinado e a leitura das medidas foi mascarada por um observador independente. As medidas

Acceptance test report for the Westinghouse 100 ton hydraulic trailer

International Nuclear Information System (INIS)

Barrett, R.A.

1995-01-01

The SY-101 Equipment Removal System 100 Ton Hydraulic Trailer was designed and built by KAMP Systems, Inc. Performance of the Acceptance Test Procedure at KAMP's facility in Ontario, California (termed Phase 1 in this report) was interrupted by discrepancies noted with the main hydraulic cylinder. The main cylinder was removed and sent to REMCO for repair while the trailer was sent to Lampson's facility in Pasco, Washington. The Acceptance Test Procedure was modified and performance resumed at Lampson (termed Phase 2 in this report) after receipt of the repaired cylinder. At the successful conclusion of Phase 2 testing the trailer was accepted as meeting all the performance criteria specified

Techniques et systèmes de renfort des structures en béton

CERN Document Server

Miranda-Vizuete, J

2000-01-01

Bien qu'appelé « pierre artificielle », le béton est un matériau vivant qui se modifie tout au long de sa vie utile. Il change car la structure dont il fait partie subit elle-même des changements. Ces changements proviennent soit de modifications ou de rénovations, soit d'une altération de sa capacité de support par un accroissement des charges. Dans la plupart des cas, ils nécessitent un renfort. Le renforcement d'une structure en béton consiste à améliorer les caractéristiques mécaniques des éléments qui la composent, de manière à ce qu'elle offre une meilleure solidité aussi bien en état de service qu'en état de résistances ultimes. Ce document présente les méthodes les plus utilisées dans le domaine de renfort des structures dont l'incorporation des profiles métalliques, l'augmentation de section structurelle et celle plus récente du renforcement à base d'adjonction de matériaux composites extérieurs.

Combination of cupric ion with hydroxylamine and hydrogen peroxide for the control of bacterial biofilms on RO membranes.

Science.gov (United States)

Lee, Hye-Jin; Kim, Hyung-Eun; Lee, Changha

2017-03-01

Combinations of Cu(II) with hydroxylamine (HA) and hydrogen peroxide (H 2 O 2 ) (i.e., Cu(II)/HA, Cu(II)/H 2 O 2 , and Cu(II)/HA/H 2 O 2 systems) were investigated for the control of P. aeruginosa biofilms on reverse osmosis (RO) membranes. These Cu(II)-based disinfection systems effectively inactivated P. aeruginosa cells, exhibiting different behaviors depending on the state of bacterial cells (planktonic or biofilm) and the condition of biofilm growth and treatment (normal or pressurized condition). The Cu(II)/HA and Cu(II)/HA/H 2 O 2 systems were the most effective reagents for the inactivation of planktonic cells. However, these systems were not effective in inactivating cells in biofilms on the RO membranes possibly due to the interactions of Cu(I) with extracellular polymeric substances (EPS), where biofilms were grown and treated in center for disease control (CDC) reactors. Different from the results using CDC reactors, in a pressurized cross-flow RO filtration unit, the Cu(II)/HA/H 2 O 2 treatment significantly inactivated biofilm cells formed on the RO membranes, successfully recovering the permeate flux reduced by the biofouling. The pretreatment of feed solutions by Cu(II)/HA and Cu(II)/HA/H 2 O 2 systems (applied before the biofilm formation) effectively mitigated the permeate flux decline by preventing the biofilm growth on the RO membranes. Copyright © 2016 Elsevier Ltd. All rights reserved.

CILogon-HA. Higher Assurance Federated Identities for DOE Science

Energy Technology Data Exchange (ETDEWEB)

Basney, James [Univ. of Illinois, Urbana-Champaign, IL (United States)

2015-08-01

The CILogon-HA project extended the existing open source CILogon service (initially developed with funding from the National Science Foundation) to provide credentials at multiple levels of assurance to users of DOE facilities for collaborative science. CILogon translates mechanism and policy across higher education and grid trust federations, bridging from the InCommon identity federation (which federates university and DOE lab identities) to the Interoperable Global Trust Federation (which defines standards across the Worldwide LHC Computing Grid, the Open Science Grid, and other cyberinfrastructure). The CILogon-HA project expanded the CILogon service to support over 160 identity providers (including 6 DOE facilities) and 3 internationally accredited certification authorities. To provide continuity of operations upon the end of the CILogon-HA project period, project staff transitioned the CILogon service to operation by XSEDE.

OPTIMALISASI LAHAN USAHATANI BERBASIS KAKAO UNTUK PEMBANGUNAN PERTANIAN BERKELANJUTAN DI DAS KRUENG SEULIMUM PROVINSI ACEH (Land Optimization of Cocoa Based on Farming for Agricultural Sustainable Development in Krueng Seulimum Watershed Aceh Province

Directory of Open Access Journals (Sweden)

Halim Akbar

2015-11-01

Full Text Available ABSTRAK Perubahan penggunaan lahan di DAS Krueng Seulimum menjadi lahan pertanian tanpa penerapan agroteknologi telah menyebabkan tingginya erosi dan produktivitas lahan yang rendah. Penelitian ini bertujuan untuk mengkaji karakteristik lahan dan agroteknologi yang diterapkan pada tanaman kakao, menganalisis alokasi lahan optimal untuk usahatani berbasis kakao dan agroteknologi yang cocok untuk mengurangi erosi dan meningkatkan pendapatan petani, dan merumuskan perencanaan usahatani berbasis kakao berkelanjutan. Hasil penelitian menunjukkan bahwa usahatani berbasis kakao berkelanjutan dapat dicapai dengan penerapan agroteknologi pemupukan lengkap pada lereng 7%, pemupukan lengkap+pembuatan teras gulud dengan tanaman penguat teras pada lereng 14% dan pemupukan lengkap+pembuatan teras gulud dengan tanaman penguat teras + pemberian mulsa 6 ton.ha-1.thn-1 pada lereng 21% dapat mengendalikan erosi hingga lebih kecil dari erosi yang dapat ditoleransikan (ETol dan memberikan pendapatan usahatani lebih besar dari kebutuhan untuk hidup layak (KHL. Tipe usahatani yang optimal di DAS Krueng Seulimum adalah tipe usahatani kakao+pisang (KPs pada lahan 1,50 ha dengan menerapkan agroteknologi pemupukan+pembuatan teras gulud+tanaman penguat teras ditambah dengan pemberian mulsa 6 ton.ha-1.thn-1 dapat menekan erosi di bawah ETol (16,03-38,64 ton.ha-1.thn-1 dengan pendapatan optimum sebesar Rp 42,954,150 kk.thn-1.   ABSTRACT Land use changes in the Krueng Seulimum watershed into agricultural land without application of suitable agro-technology have led to high erosion and low land productivity. This study aims to assess the characteristics of the land and agro-technology applied the cocoa crop, analyze the allocation of optimal land for cocoa farming and suitable agro-technology to reduce erosion and to increase farmers’ income and formulate cocoa based on sustainable farming plans. The results show that sustainable cocoa based farming can be achieved with the

Wear characterization of nano-hydroxyapatite with addition of titanium (HA-Ti)

Science.gov (United States)

Rosmamuhamadani, R.; Arawi, A. Z. O.; Talari, M. K.; Mahat, M. M.; Bonnia, N. N.; Sabrina; Yahaya, M.; Sulaiman, S.; Ismail, M. I. S.

2018-04-01

Hydroxyapatite (Ca10 (PO4)6(OH)2, HA), is an attractive material of an inorganic compound whose chemical composition and crystallographic structures are similar to the composition of the bone. A natural source such as egg shells is composed of 94 wt. % of calcium carbonate (CaCO3), which can be calcined as calcium oxide (CaO) by the calcinations process. The efficient temperature to produce CaO is 900 °C for 2 hours. The synthesis of nano-HA was done by the mixing the diammonium phosphate (DAP) and calcium hydroxide (Ca(OH)2) and subjected into a microwave for 30 minutes at 1100 W irradiation power. Ball milling process was used for 30 minutes to mix the nano-HA with different compositions of titanium. These were pressed to form pallets by hand hydraulic pump (force=2300 psi). The pallets then were sintered at 1200 °C with the heating rate of 3 °C/min for 2 hours. The pallets were tested by several mechanical testing including hardness, compression strength and wear. From the results, HA-25wt. %Ti composite gave the highest hardness, compression and coefficient of friction for wear test values which were 89.6 Hv, 82.5MPa and 0.76μ respectively. It showed that by adding Ti to nano-HA, the mechanical properties of nano-HA could be enhanced. The microstructure analyses by optical micrograph showed that nano-HA-Ti particles displayed shape likes needle morphology. The particles showed the high tendency to form the agglomerations.

Degradation behavior and compatibility of micro, nanoHA/chitosan scaffolds with interconnected spherical macropores.

Science.gov (United States)

Ruixin, Li; Cheng, Xu; Yingjie, Liu; Hao, Li; Caihong, Shi; Weihua, Su; Weining, An; Yinghai, Yuan; Xiaoli, Qin; Yunqiang, Xu; Xizheng, Zhang; Hui, Li

2017-10-01

Hydroxyapatite/Chitosan (HA/CS) composite have significant application in biomedical especially for bone replacement. Inorganic particle shape and size of composite affect the scaffold mechanical property, biological property, and degradation. The aim of this study was to fabricate HA/CS scaffold with good pore connectivity and analyze their biological, degradation properties. Microhydroxyapatite/chitosan (mHA/CS) and nanohydroxyapatite/chitosan (nHA/CS) composite scaffolds with interconnected spherical pore architectures were fabricated. Composite scaffolds structure parameters were analyzed using micro CT. Cell proliferation and morphology were tested and compared between two scaffolds using mouse osteoblastic cell line MC3T3-E1. To research the composite degradation in lysozyme PBS solution, degradation rate and reducing sugar content were tested, and scaffolds morphology were observed by SEM. The results showed that microHA and nanoHA were fabricated by being calcined and synthesis methods, and their infrared spectra are very similar. EDAX composition analysis demonstrated that both of microHA and nanoHA were calcium deficiency HA. Micro-CT results demonstrated the scaffolds had interconnected spherical pores, and the structure parameters were similar. Cell viabilities were significant increased with cultured time, but there were no significant difference between microHA/CS and nanoHA/CS scaffolds. Scaffold structure was gradually destroyed and inorganic composition HA particles are more prominent with degradation time. (1) Inorganic particle shape and size of composite affect the scaffold mechanical property, biological property, and degradation. NanoHA/CS and microHA/CS scaffolds with good pore connectivity were fabricated and their biological, degradation properties were studied in this manuscript. (2) The scaffold with interconnected porosity construct provides the necessary support for cells to proliferate and maintain their differentiated function, and

SEED YIELD AND ITS COMPONENTS OF ALFALFA AS INFLUENCED BY SULFUR AND LAST CUTTING DATE

Directory of Open Access Journals (Sweden)

H. K. Khrbeet

2016-09-01

Full Text Available A field study was conducted at the experimental farm, Coll. of Agric., Abu-Ghraib, Baghdad, Iraq during the period from mid of march 2013 to end of August 2014 to investigate the effect of different levels of sulfur (0, 1, 2 and 3 ton. ha-1 and three dates of last cutting (1, 10th and 20th ,May 2014_ on seed yield and it’s components of alfalfa local cultivar, Layout of the experiment was R.C.B.D. arranged in split –plots with three replications. Sulfur levels were used as main plot and the time when last cutting occurs was sub-plot. Results, showed that addition of sulfur at level more than 1 ton.ha-1 (2, 3 ton ha-1 resulted in a significant increasment in the No. of seeds per pod, No. of pods per raceme, No. of racemes per stem, No. of stems per m-2 and seed yield kg.ha-1 . While, No. of ovules per floret, % of ovules abortion and 1000 seed weight were not significantly influenced by sulfur levels. Highest seed yield (579.4 Kg ha-1 was obtained when sulfur added at level 2 ton ha-1 . Plants, when last cutting occurred on 10th of May produced highest No. of pods per raceme, No. of stems per m-2 and seed yield (530.8 Kg h-1 . There were no significant effect of last cutting date on, No. of ovules per floret, No. of seed per pod, % of abortion and 1000 seed weight. There were high positive correlation between seed yield and each of No. of seeds per pods, No. of pods per raceme and No. racemes per stem (+0.880, +0.918 and +0.920 respectively. This result suggests that yield components may be good selection criteria for breeding seed yield of alfalfa cultivars. High seed yield can be obtained from stands received 2 ton ha-1 and last cutting occurred on 10th May.

Stability of Cu-Precipitates in Al-Cu Alloys

Directory of Open Access Journals (Sweden)

Torsten E. M. Staab

2018-06-01

Full Text Available We present first principle calculations on formation and binding energies for Cu and Zn as solute atoms forming small clusters up to nine atoms in Al-Cu and Al-Zn alloys. We employ a density-functional approach implemented using projector-augmented waves and plane wave expansions. We find that some structures, in which Cu atoms are closely packed on {100}-planes, turn out to be extraordinary stable. We compare the results with existing numerical or experimental data when possible. We find that Cu atoms precipitating in the form of two-dimensional platelets on {100}-planes in the fcc aluminum are more stable than three-dimensional structures consisting of the same number of Cu-atoms. The preference turns out to be opposite for Zn in Al. Both observations are in agreement with experimental observations.

Microstructure, mechanical properties, and biological response to functionally graded HA coatings

International Nuclear Information System (INIS)

Rabiei, Afsaneh; Blalock, Travis; Thomas, Brent; Cuomo, Jerry; Yang, Y.; Ong, Joo

2007-01-01

Hydroxyapatite (HA) [Ca 10 (PO 4 ) 6 (OH) 2 ] is the primary mineral content, representing 43% by weight, of bone. Applying a thin layer of HA, to the surface of a metal implant, can promote osseointegration and increase the mechanical stability of the implant. In this study, a biocompatible coating comprising an HA film with functionally graded crystallinity is being deposited on a heated substrate in an Ion Beam Assisted Deposition (IBAD) system. The microstructure of the film was studied using Transmission Electron Microscopy techniques. Finally, initial cell adhesion and cell differentiation on the coating was evaluated using ATCC CRL 1486 human embryonic palatal mesenchymal cell, an osteoblast precursor cell line. The results have shown superior mechanical properties and biological response to the functionally graded HA film

Effect of manure and plants spacing on yield and flavonoid content of Elephantopus scaber L.

Science.gov (United States)

Riyana, D.; Widiyastuti, Y.; Widodo, H.; Purwanto, E.; Samanhudi

2018-03-01

This experiment is aimed to observe the growth and flavonoid contain of Tapak Liman (Elephantopus scaber L.) with different manure types and plants spacing treatment. This experiment is conducted at Tegal Gede Village, Karanganyar District on June until August 2016. The analysis of secondary metabolism was done in B2P2TOOT, Tawangamangu. This experiment is conducted with Randomized Complete Block Design (RCBD) with two treatment factors, those are manure and plants spacing. Animal manure treatment had 3 levels, those are without manure, cow manure with 20 ton/ha dose, and chicken manure with 20 ton/ha dose. Plants spacing treatment had 3 phrase, those are 20 cm × 20 cm; 30 × 30 cm; 40 cm × 40 cm. The result of this experiment shows that chicken manure with 20 ton/ha dosage increase the development of leaves’ lengthiness, header’s diameter, plant’s fresh weight, and plant’s dry weight. Plants spacing 40 cm × 40 cm increase for the development of leaves’ lengthiness, header’s diameter, plant’s wet weight, and plant’s dry weight. The combination between chicken manure with 20 ton/ha dose and plants spacing 40 cm × 40cm treatments show the highest amount of tapak liman extract and alleged having the biggest amount of flavonoid substance.

Intra-articular Hyaluronic Acid (HA) and Platelet Rich Plasma (PRP) injection versus Hyaluronic acid (HA) injection alone in Patients with Grade III and IV Knee Osteoarthritis (OA): A Retrospective Study on Functional Outcome.

Science.gov (United States)

Saturveithan, C; Premganesh, G; Fakhrizzaki, S; Mahathir, M; Karuna, K; Rauf, K; William, H; Akmal, H; Sivapathasundaram, N; Jaspreet, K

2016-07-01

Introduction: Intra-articular hyaluronic acid (HA) is widely utilized in the treatment of knee osteoarthritis whereas platelet rich plasma (PRP) enhances the regeneration of articular cartilage. This study analyses the efficacy of HA and PRP in grade III and IV knee osteoarthritis. Methodology: This is a cross sectional study with retrospective review of 64 patients (101 knees) which includes 56 knees injected with HA+ PRP, and 45 knees with HA only. Results: During the post six months International Knee Documentation Committee (IKDC) evaluation, HA+PRP group showed marked improvement of 24.33 compared to 12.15 in HA group. Decrement in visual analogue score (VAS) in HA+PRP was 1.9 compared to 0.8 in HA group. Conclusion: We propose intra-articular HA and PRP injections as an optional treatment modality in Grade III and IV knee osteoarthritis in terms of functional outcome and pain control for up to six months when arthroplasty is not an option.

Intra-articular Hyaluronic Acid (HA and Platelet Rich Plasma (PRP injection versus Hyaluronic acid (HA injection alone in Patients with Grade III and IV Knee Osteoarthritis (OA: A Retrospective Study on Functional Outcome

Directory of Open Access Journals (Sweden)

Saturveithan C

2016-07-01

Full Text Available Introduction: Intra-articular hyaluronic acid (HA is widely utilized in the treatment of knee osteoarthritis whereas platelet rich plasma (PRP enhances the regeneration of articular cartilage. This study analyses the efficacy of HA and PRP in grade III and IV knee osteoarthritis. Methodology: This is a cross sectional study with retrospective review of 64 patients (101 knees which includes 56 knees injected with HA+ PRP, and 45 knees with HA only. Results: During the post six months International Knee Documentation Committee (IKDC evaluation, HA+PRP group showed marked improvement of 24.33 compared to 12.15 in HA group. Decrement in visual analogue score (VAS in HA+PRP was 1.9 compared to 0.8 in HA group. Conclusion: We propose intra-articular HA and PRP injections as an optional treatment modality in Grade III and IV knee osteoarthritis in terms of functional outcome and pain control for up to six months when arthroplasty is not an option.

A-Ha. Drum'n'bassi supernimi FABIO

Index Scriptorium Estoniae

2002-01-01

7.sept. annab norra menukaim popansambel A-Ha Tallinnas Lauluväljakul kontserdi, kus presenteerib ka oma viimast albumit "Lifelines". 14. sept.tuleb drum'n'bassi spetsialist Fabio Tallinna üritusele Circulation

Mechanical strength of [HA/Bioplastic/Sericin] composite part printed by bioprinter

Energy Technology Data Exchange (ETDEWEB)

Tontowi, Alva Edy, E-mail: alvaedytontowi@ugm.ac.id; Setiawan, Agris [Department of Mechanical and Industrial Engineering Faculty of Engineering Universitas Gadjah Mada (Indonesia)

2016-06-17

The aim of this research was to determine the effect of hydroxyapatite (HA) content in printed biocomposite to its mechanical strength. The biocomposite paste was prepared by composing HA, bioplastic and sericin with various ratios of [HA/Bioplastic]: 40/60, 50/50, 60,40 and 70/30. Sericin of 0.3% weight was added to the biocomposite. Mechanical test was conducted to observe tensile (ASTM D 638 type 4) and flexural strength (ASTM D 790). Both type of specimens were fabricated using 3D Printer. Printing process parameter (infill speed, print speed and layer height) were set up as 60 mm/s, 10 mm/s, 0.35 mm, respectively. Results showed that biocomposite with [HA/Biplastic]. weight ratio of 60/40(w/w) has an optimum tensile (3.89 ± 1.26 MPa) and flexural strength (2.51 ± 0.45 MPa). Scanning electron microscope observation indicated that microstructure of specimen was influenced by the percentage of the hydroxyapatite. There was no agglomeration of HA particle within the composite.

Mechanical strength of [HA/Bioplastic/Sericin] composite part printed by bioprinter

International Nuclear Information System (INIS)

Tontowi, Alva Edy; Setiawan, Agris

2016-01-01

The aim of this research was to determine the effect of hydroxyapatite (HA) content in printed biocomposite to its mechanical strength. The biocomposite paste was prepared by composing HA, bioplastic and sericin with various ratios of [HA/Bioplastic]: 40/60, 50/50, 60,40 and 70/30. Sericin of 0.3% weight was added to the biocomposite. Mechanical test was conducted to observe tensile (ASTM D 638 type 4) and flexural strength (ASTM D 790). Both type of specimens were fabricated using 3D Printer. Printing process parameter (infill speed, print speed and layer height) were set up as 60 mm/s, 10 mm/s, 0.35 mm, respectively. Results showed that biocomposite with [HA/Biplastic]. weight ratio of 60/40(w/w) has an optimum tensile (3.89 ± 1.26 MPa) and flexural strength (2.51 ± 0.45 MPa). Scanning electron microscope observation indicated that microstructure of specimen was influenced by the percentage of the hydroxyapatite. There was no agglomeration of HA particle within the composite.

Estructura electrónica y propiedades ópticas de puntos cuánticos auto-organizados.

OpenAIRE

Llorens Montolío, José Manuel

2007-01-01

RESUMEN En el presente trabajo de Tesis se ha realizado un estudio teórico de las principales propiedades de los puntos cuánticos semiconductores auto-organizados (SAQDs). Estas estructuras surgen de la unión de diferentes materiales semiconductores donde la contribución de uno de ellos presenta una escala nanométrica. Debido a su reducido tamaño, estas nanoestructuras son capaces de confinar espacialmente los electrones que se hallen en su interior. Es por ello que presentan unas propieda...

New Coll–HA/BT composite materials for hard tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Zanfir, Andrei Vlad [Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Material Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu Street, RO-011061 Bucharest (Romania); Voicu, Georgeta, E-mail: getav2001@yahoo.co.uk [Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Material Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu Street, RO-011061 Bucharest (Romania); Busuioc, Cristina; Jinga, Sorin Ion [Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Material Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu Street, RO-011061 Bucharest (Romania); Albu, Madalina Georgiana [Department of Collagen, Branch of Leather and Footwear Research, National Institute of Research and Development for Textile and Leather, 93 I. Minulescu Street, RO-031215 Bucharest (Romania); Iordache, Florin [Department of Fetal and Adult Stem Cell Therapy, “Nicolae Simionescu” Institute of Cellular Biology and Pathology of Romanian Academy, 8 B.P. Hasdeu Street, RO-050568 Bucharest (Romania)

2016-05-01

The integration of ceramic powders in composite materials for bone scaffolds can improve the osseointegration process. This work was aimed to the synthesis and characterization of new collagen–hydroxyapatite/barium titanate (Coll–HA/BT) composite materials starting from barium titanate (BT) nanopowder, hydroxyapatite (HA) nanopowder and collagen (Coll) gel. BT nanopowder was produced by combining two wet-chemical approaches, sol–gel and hydrothermal methods. The resulting materials were characterized in terms of phase composition and microstructure by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and transmission electron microscopy. Moreover, the biocompatibility and bioactivity of the composite materials were assessed by in vitro tests. The synthesized BT particles exhibit an average size of around 35 nm and a spherical morphology, with a pseudo-cubic or tetragonal symmetry. The diffraction spectra of Coll–HA and Coll–HA/BT composite materials indicate a pronounced interaction between Col and the mineral phases, meaning a good mineralization of Col fibres. As well, the in vitro tests highlight excellent osteoinductive properties for all biological samples, especially for Coll–HA/BT composite materials, fact that can be attributed to the ferromagnetic properties of BT. - Highlights: • Collagen–hydroxyapatite/barium titanate composite materials were synthesized. • Barium titanate was produced by combining the sol–gel and hydrothermal methods. • The in vitro tests highlight excellent osteoinductive properties for all samples.

New Coll–HA/BT composite materials for hard tissue engineering

International Nuclear Information System (INIS)

Zanfir, Andrei Vlad; Voicu, Georgeta; Busuioc, Cristina; Jinga, Sorin Ion; Albu, Madalina Georgiana; Iordache, Florin

2016-01-01

The integration of ceramic powders in composite materials for bone scaffolds can improve the osseointegration process. This work was aimed to the synthesis and characterization of new collagen–hydroxyapatite/barium titanate (Coll–HA/BT) composite materials starting from barium titanate (BT) nanopowder, hydroxyapatite (HA) nanopowder and collagen (Coll) gel. BT nanopowder was produced by combining two wet-chemical approaches, sol–gel and hydrothermal methods. The resulting materials were characterized in terms of phase composition and microstructure by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and transmission electron microscopy. Moreover, the biocompatibility and bioactivity of the composite materials were assessed by in vitro tests. The synthesized BT particles exhibit an average size of around 35 nm and a spherical morphology, with a pseudo-cubic or tetragonal symmetry. The diffraction spectra of Coll–HA and Coll–HA/BT composite materials indicate a pronounced interaction between Col and the mineral phases, meaning a good mineralization of Col fibres. As well, the in vitro tests highlight excellent osteoinductive properties for all biological samples, especially for Coll–HA/BT composite materials, fact that can be attributed to the ferromagnetic properties of BT. - Highlights: • Collagen–hydroxyapatite/barium titanate composite materials were synthesized. • Barium titanate was produced by combining the sol–gel and hydrothermal methods. • The in vitro tests highlight excellent osteoinductive properties for all samples.

Influence of Cu content on the cell biocompatibility of Ti–Cu sintered alloys

Energy Technology Data Exchange (ETDEWEB)

Zhang, Erlin, E-mail: zhangel@atm.neu.edu.cn [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Jiamusi University, Jiamusi 154007 (China); Zheng, Lanlan [Jiamusi University, Jiamusi 154007 (China); Liu, Jie [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Dept. of Prosthodontics, The Affiliated Hospital of Medical College, Qingdao University, Qingdao 266003 (China); Bai, Bing [Dept. of Prosthodontics, School of Stomatology, China Medical University, Liaoning Institute of Dental Research, Shenyang 110001 (China); Liu, Cong [Jiamusi University, Jiamusi 154007 (China)

2015-01-01

The cell toxicity and the cell function of Ti–Cu sintered alloys with different Cu contents (2, 5, 10 and 25 wt.%, respectively) have been investigated in comparison with commercial pure titanium in order to assess the influence of Cu content on the cell biocompatibility of the Ti–Cu alloys. The cytotoxicity was studied by examining the MG63 cell response by CCK8 assessment. The cell morphology was evaluated by acridine orange/ethidium bromide (AO/EB) fluorescence and observed under scanning electronic microscopy (SEM). The cell function was monitored by measuring the AKP activity. It has been shown by the AO/EB morphology results that the cell death on both cp-Ti sample and Ti–Cu samples is due to apoptosis rather than necrosis. Although more apoptotic cells were found on the Ti–2Cu and Ti–5Cu samples, no evidence of Cu content dependent manner of apoptosis has been found. SEM observation indicated very good cell adhesion and spread on the cp-Ti sample and the Ti–Cu samples with different Cu contents. CCK8 results displayed that increase in the Cu content in Ti–Cu alloys does not bring about any difference in the cell viability. In addition, AKP test results indicated that no difference in the differentiation of MG63 was found between the cp-Ti and the Ti–Cu samples and among the Ti–Cu samples. All results indicated that Ti–Cu alloys exhibit very good cell biocompatibility and the Cu content up to 25 wt.% in the Ti–Cu alloys has no influence on the cell proliferation and differentiation. - Highlights: • The effect of Cu content on the cell biocompatibility has been investigated. • Cu content shows no influence on the cell proliferation. • Cu content shows no effect on the cell differentiation.

Influence of Cu content on the cell biocompatibility of Ti–Cu sintered alloys

International Nuclear Information System (INIS)

Zhang, Erlin; Zheng, Lanlan; Liu, Jie; Bai, Bing; Liu, Cong

2015-01-01

The cell toxicity and the cell function of Ti–Cu sintered alloys with different Cu contents (2, 5, 10 and 25 wt.%, respectively) have been investigated in comparison with commercial pure titanium in order to assess the influence of Cu content on the cell biocompatibility of the Ti–Cu alloys. The cytotoxicity was studied by examining the MG63 cell response by CCK8 assessment. The cell morphology was evaluated by acridine orange/ethidium bromide (AO/EB) fluorescence and observed under scanning electronic microscopy (SEM). The cell function was monitored by measuring the AKP activity. It has been shown by the AO/EB morphology results that the cell death on both cp-Ti sample and Ti–Cu samples is due to apoptosis rather than necrosis. Although more apoptotic cells were found on the Ti–2Cu and Ti–5Cu samples, no evidence of Cu content dependent manner of apoptosis has been found. SEM observation indicated very good cell adhesion and spread on the cp-Ti sample and the Ti–Cu samples with different Cu contents. CCK8 results displayed that increase in the Cu content in Ti–Cu alloys does not bring about any difference in the cell viability. In addition, AKP test results indicated that no difference in the differentiation of MG63 was found between the cp-Ti and the Ti–Cu samples and among the Ti–Cu samples. All results indicated that Ti–Cu alloys exhibit very good cell biocompatibility and the Cu content up to 25 wt.% in the Ti–Cu alloys has no influence on the cell proliferation and differentiation. - Highlights: • The effect of Cu content on the cell biocompatibility has been investigated. • Cu content shows no influence on the cell proliferation. • Cu content shows no effect on the cell differentiation

Renal Cu and Na excretion and hepatic Cu metabolism in both Cu acclimated and non acclimated rainbow trout (Oncorhynchus mykiss)

DEFF Research Database (Denmark)

Grosell, M.; Hogstrand, C.; Wood, C.M.

1998-01-01

protein depending on whether the Cu is derived from recent branchial uptake or is already present in the plasma prior to Cu-64 exposure. The plasma Cu pool derived from recent branchial uptake and the Cu pool present in the plasma prior to Cu-64 exposure is accessible to renal excretion to different...... Na+ efflux decreased by 40%, which was largely due to increased tubular Na+ reabsorption. Renal compensation for the impaired branchial Na+ uptake, seen during Cu exposure, thus seems to be involved in Cu acclimation in rainbow trout. (C) 1998 Elsevier Science B.V....

Effects of vermicompost and nitrogen fertilizers on growth of Jimson weed (Datura stramonium L. as a medicinal plant

Directory of Open Access Journals (Sweden)

Ramin Abbaspour

2016-05-01

Full Text Available An experiment was conducted in order to evaluate the effect of organic (3 and 6 ton/ha vermicompost and chemical (150 and 300 kg/ha nitrogen fertilizers on growth, seed dispersal and heteroblasty of jimson weed at green house of Shiraz University in 2012. The results showed that the highest and the lowest plant growth, seed production and seed dispersal was in 300 kg/ha N and 6 ton/ha vermicompost, respectively. Position of the seeds on maternal plant had an important influence on the emergence percentage. Seeds on the middle and lowest parts of the plants had less emergence percentage compared with those on the higher parts. In general, application of 300 kg/ha nitrogen accelerated the growth of jimson weed and increase dispersal and heteroblasty of the jimson seed.

Overall view of the AA hall dominated by the 50 ton crane (Donges).

CERN Multimedia

1980-01-01

A 50 ton, 32 metre span overhead travelling cranre was mounted in one of the bays of Hall 193 (AA). An identical crane was mounted on the other bay. See also photo 8004261. For photos of the AA in different phases of completion (between 1979 and 1982) see: 7911303, 7911597X, 8004261, 8004608X, 8005563X, 8005565X, 8006716X, 8006722X, 8010939X, 8010941X, 8202324, 8202658X, 8203628X .

Acceptance test report for the Westinghouse 100 ton hydraulic trailer

Energy Technology Data Exchange (ETDEWEB)

Barrett, R.A.

1995-03-06

The SY-101 Equipment Removal System 100 Ton Hydraulic Trailer was designed and built by KAMP Systems, Inc. Performance of the Acceptance Test Procedure at KAMP`s facility in Ontario, California (termed Phase 1 in this report) was interrupted by discrepancies noted with the main hydraulic cylinder. The main cylinder was removed and sent to REMCO for repair while the trailer was sent to Lampson`s facility in Pasco, Washington. The Acceptance Test Procedure was modified and performance resumed at Lampson (termed Phase 2 in this report) after receipt of the repaired cylinder. At the successful conclusion of Phase 2 testing the trailer was accepted as meeting all the performance criteria specified.

Cu-Zr-Ag bulk metallic glasses based on Cu8Zr5 icosahedron

International Nuclear Information System (INIS)

Xia Junhai; Qiang Jianbing; Wang Yingmin; Wang Qing; Dong Chuang

2007-01-01

Based on the cluster line criterion, the Ag addition into the Cu 8 Zr 5 cluster composition is investigated for the search of ternary Cu-Zr-Ag bulk metallic glasses with high glass forming abilities. Two initial binary compositions Cu 0.618 Zr 0.382 and Cu 0.64 Zr 0.36 are selected. The former one corresponds to a deep eutectic point; it is also the composition of the Cu 8 Zr 5 icosahedron, which is derived from the Cu 8 Zr 3 structure. The latter one, which can be regarded as the Cu 8 Zr 5 cluster plus a glue atom Cu, is the best glass-forming composition in the Cu-Zr binary system. Two composition lines (Cu 0.618 Zr 0.382 ) 1-x Ag x and (Cu 0.64 Zr 0.36 ) 1-x Ag x are thus constructed in the Cu-Zr-Ag system by linking these two compositions with the third constitute Ag. A series of Cu-Zr-Ag bulk metallic glasses are found with 2-8 at.% Ag contents in both composition lines. The optimum composition (Cu 0.618 Zr 0.382 ) 0.92 Ag 0.08 within the searched region with the highest T g /T l = 0.633, is located along the cluster line (Cu 0.618 Zr 0.382 ) 1-x Ag x , where the deep eutectic Cu 0.618 Zr 0.382 exactly corresponds to the dense packing cluster Cu 8 Zr 5 . The alloying mechanism is discussed in the light of atomic size and electron concentration factors

Human hypervariable sequences in risk assessment: rare Ha-ras alleles in cancer patients

International Nuclear Information System (INIS)

Krontiris, T.G.; DiMartino, N.A.; Mitcheson, H.D.; Lonergan, J.A.; Begg, C.; Parkinson, D.R.

1987-01-01

A variable tandem repeat (VTR) is responsible for the hyperallelism one kilobase 3' to the human c-Ha-ras-1 (Ha-ras) gene. Thirty-two distinct restriction fragments, comprising 3 allelic classes by frequency of occurrence, have thus far been detected in a sample size of approximately 800 caucasians. Rare Ha-ras alleles, 21 in all, are almost exclusively confined to the genomes of cancer patients. From their data the authors have computed the relative cancer risk associated with possession of a rare Ha-ras allele to be 27. To understand the molecular basis for this phenomenon, they have begun to clone Ha-ras fragments from nontumor DNA of cancer patients. They report here the weak activation, as detected by transfection and transformation of NIH 3T3 mouse cells, of two Ha-ras genes which were obtained from lymphocyte DNA of a melanoma patient. They have mapped the regions that confer this transforming activity to the fragment containing the VTR in one Ha-ras clone and the fragment containing gene coding sequences in the other

Stability enhancement of Cu2S against Cu vacancy formation by Ag alloying

Science.gov (United States)

Barman, Sajib K.; Huda, Muhammad N.

2018-04-01

As a potential solar absorber material, Cu2S has proved its importance in the field of renewable energy. However, almost all the known minerals of Cu2S suffer from spontaneous Cu vacancy formation in the structure. The Cu vacancy formation causes the structure to possess very high p-type doping that leads the material to behave as a degenerate semiconductor. This vacancy formation tendency is a major obstacle for this material in this regard. A relatively new predicted phase of Cu2S which has an acanthite-like structure was found to be preferable than the well-known low chalcocite Cu2S. However, the Cu-vacancy formation tendency in this phase remained similar. We have found that alloying silver with this structure can help to reduce Cu vacancy formation tendency without altering its electronic property. The band gap of silver alloyed structure is higher than pristine acanthite Cu2S. In addition, Cu diffusion in the structure can be reduced with Ag doped in Cu sites. In this study, a systematic approach is presented within the density functional theory framework to study Cu vacancy formation tendency and diffusion in silver alloyed acanthite Cu2S, and proposed a possible route to stabilize Cu2S against Cu vacancy formations by alloying it with Ag.

Characterization of p-CuI prepared by the SILAR technique on Cu-tape/n-CuInS2 for solar cells

International Nuclear Information System (INIS)

Sankapal, B.R.; Ennaoui, A.; Guminskaya, T.; Dittrich, Th.; Bohne, W.; Roehrich, J.; Strub, E.; Lux-Steiner, M.Ch.

2005-01-01

CuI has been synthesized at room temperature on Cu-tape/n-CuInS 2 by using the SILAR technique (successive ionic layer adsorption and reaction). The influence of wet chemical iodine treatment on the CuI has been investigated in more detail. The films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), elastic recoil detection analysis (ERDA) and surface photovoltage (SPV) techniques. The CuI films contain the no. gammano. -phase of the Zinkblende structure. The crystallites are preferentially oriented in the (111) direction. After wet chemical iodine treatment, the fibrous surface morphology changed to a more dense CuI film with larger crystallites. Oxides could not be detected on the CuI surface. The density of surface states of CIS decreased after the CuI deposition. The importance of the wet chemical iodine treatment for the performance of Cu-tape/n-CuInS 2 /p-CuI solar cells has been demonstrated

Cu diffusion as an alternative method for nanopatterned CuTCNQ film growth

International Nuclear Information System (INIS)

Capitán, M J; Álvarez, J; Miranda, R; Navío, C

2016-01-01

In this paper we show by means of ‘in situ’ x-ray diffraction studies that CuTCNQ formation from Cu(solid)–TCNQ(solid tetracyanoquinodimethane) goes through Cu diffusion at room temperature. The film quality depends on the TCNQ evaporation rate. At low evaporation rate we get a single phase-I CuTCNQ film very well crystallized and well oriented. The film has a CuTCNQ(0 2 0) orientation. The film is formed by CuTCNQ nanorods of a very homogeneous size. The film homogeneity has also been seen by atomic force microscopy (AFM). The electronic properties of the film have been measured by x-ray photoelectron spectroscopy (XPS) and ultra-violet photoelectron spectroscopy (UPS). Thus, the Cu-diffusion method has arisen as a very simple, clean and efficient method to grow localized CuTCNQ nanorods on Cu, opening up new insights for technological applications. (paper)

Controllable synthesis and enhanced photocatalytic properties of Cu2O/Cu31S16 composites

International Nuclear Information System (INIS)

Liu, Xueqin; Li, Zhen; Zhang, Qiang; Li, Fei

2012-01-01

Highlights: ► Facile sonochemical route. ► The content of Cu 31 S 16 in the Cu 2 O/Cu 31 S 16 can be easily controlled. ► Structure and optical properties of Cu 2 O/Cu 31 S 16 were discussed. ► Enhanced photocatalytic property of Cu 2 O/Cu 31 S 16 . ► Cu 2 O/Cu 31 S 16 core/shell structures were more stable than single Cu 2 O particles. -- Abstract: The controlled synthesis of Cu 2 O/Cu 31 S 16 microcomposites with hierarchical structures had been prepared via a convenient sonochemical route. Ultrasonic irradiation of a mixture of Cu 2 O and (NH 2 ) 2 CS in an aqueous medium yielded Cu 2 O/Cu 31 S 16 composites. The content of Cu 31 S 16 in the Cu 2 O/Cu 31 S 16 can be easily controlled by adjusting the synthesis time. The Cu 31 S 16 layer not only protected and stabilized Cu 2 O particles, but also prohibited the recombination of photogenerated electrons–holes pair between Cu 31 S 16 and Cu 2 O. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) spectra, ultraviolet–visible (UV–Vis) spectroscopy and photoluminescence (PL) spectroscopy were used to characterize the products. Photocatalytic performance of the Cu 2 O/Cu 31 S 16 hierarchical structures was evaluated by measuring the decomposition rate of methyl orange solution under natural light. To the best of our knowledge, this is the first report on the preparation and photocatalytic activity of Cu 2 O/Cu 31 S 16 microcomposite. Additionally, the Cu 2 O/Cu 31 S 16 core/shell structures were more stable than single Cu 2 O particles during photocatalytic process since the photocatalytic activity of the second reused architecture sample was much higher than that of pure Cu 2 O. The Cu 2 O/Cu 31 S 16 microcomposites may be a good promising candidate for wastewater treatment.

Poredbena analiza Haških i Roterdamskih pravila

Directory of Open Access Journals (Sweden)

Vesna Skorupan Wolff

2010-12-01

Full Text Available Primjenom komparativne metode uspoređuju se najvažnije konvencijske odredbe i rješenja Roterdamskih pravila s onima sadržanim u Haškim pravilima. Raščlanjuje se većina recentnih odredbi Roterdamskih pravila koje predstavljaju ključne elemente po kojime se ona razlikuju od Haških pravila. U okviru toga ukazuje se na važnost novih pojmova, instituta i osoba koje sudjeluju u prijevoznom poslu. Govori se i o važnim odredbama koje su podudarne jer upravo brojna tradicionalna rješenja koja donose Roterdamska pravila mogu pridonijeti njihovom bržem i lakšem akceptiranju. Roterdamska pravila nastoje na suvremeni način urediti ugovore o prijevozu stvari morem, a pod određenim uvjetima primjenjivat će se i na prijevoze drugim prijevoznim granama. Opsežnost konvencije govori o njezinoj sveobuhvatnosti i velikoj preciznosti u propisivanju gotovo svih pitanja iz područja pravnog uređenja pomorskih prijevoznih ugovora, i više od toga, ona je jedinstven primjer temeljite raščlambe svih obveza i odgovornosti ugovornih stranaka i općenito svih subjekata koji se pojavljuju u prijevoznom poslu. Cilj poredbene analize Haških i Roterdamskih pravila je spoznati što novo donose Roterdamska pravila i procijeniti kako se ona uklapaju u postojeće pravno uređenje prijevoza stvari morem. Istodobno cilj je spoznati koje se odredbe Haških pravila danas izlažu kritici zbog njihove neprilagođenosti suvremenim uvjetima prijevoza i novim i drugačijim odnosima snaga između ugovornih strana u pomorskim prijevoznim ugovorima.

New therapeutic agent for radiation synovectomy - preparation of 166Ho-EDTMP-HA particle

International Nuclear Information System (INIS)

Bai, H.; Jin, X.; Du, J.; Wang, F.; Chen, D.; Fan, H.; Cheng, Z.; Zhang, J.

1997-01-01

In order to prepare new therapeutical agent for radiation synovectomy, Hydroxyapatite (HA) was labelled with 166 Ho by EDTMP that had high affinity to HA particles. Radiolabelling of HA particles was divided into two steps, 166 Ho-EDTMP was prepared first; then mixed with HA particles completely and vibrated for 15 minutes on the micromixer at room temperature, washed 3 times with deionized water. Radiolabelling particle was separated from free 166 Ho via centrifugation to determine its radiolabelling efficiency. 166 Ho-EDTMP-HA and 166 Ho-EDTMP were injected into knee joint of normal rabbits respectively, every group was killed at different time postinjection, took out major organ and collected urine and blood, then weighted and determined their radio counts. HA particles, as a natural component of bone was known to have good compatibility with soft tissue and biodegrade into calcium and phosphate in vivo. It was readily prepared from common chemical and formed into particles of desired size range in a controlled process, it had high stability in vitro and vivo. Radiolabelling of HA particle with 166 Ho by EDTMP was simple to perform and provides an excellent labelling yield that was more than 95% under the optimal labelling condition. The optimal labelling condition at room temperature was pH 6.0-8.0 and vibration time 15 minutes. The absorbed capacity of HA particle was 5 mg Ho/g HA particle and size of radiolabelling particle was at range of 2-5,μm that is suitable for therapy of radiation synovectomy. 166 Ho-EDTMP-HA particle demonstrated high in vitro stability in either normal saline or 1% BSA solution, but instability under extremely acidic condition (pH 1-2). The control studies performed with 166 Ho-EDTMP not bound to HA particle provided information on the distribution of radioactivity that would occur upon leakage of the radiochemical compound from joint. Its short half-life, its extremely low leakage from the joint and its even distribution throughout

Dark matter sensitivity of multi-ton liquid xenon detectors

International Nuclear Information System (INIS)

Schumann, Marc; Bütikofer, Lukas; Baudis, Laura; Kish, Alexander; Selvi, Marco

2015-01-01

We study the sensitivity of multi ton-scale time projection chambers using a liquid xenon target, e.g., the proposed DARWIN instrument, to spin-independent and spin-dependent WIMP-nucleon scattering interactions. Taking into account realistic backgrounds from the detector itself as well as from neutrinos, we examine the impact of exposure, energy threshold, background rejection efficiency and energy resolution on the dark matter sensitivity. With an exposure of 200 t × y and assuming detector parameters which have been already demonstrated experimentally, spin-independent cross sections as low as 2.5 × 10 −49 cm 2 can be probed for WIMP masses around 40 GeV/c 2 . Additional improvements in terms of background rejection and exposure will further increase the sensitivity, while the ultimate WIMP science reach will be limited by neutrinos scattering coherently off the xenon nuclei

Growth and characterisation of potentiostatically electrodeposited Cu2O and Cu thin films

International Nuclear Information System (INIS)

Wijesundera, R.P.; Hidaka, M.; Koga, K.; Sakai, M.; Siripala, W.

2006-01-01

Cuprous oxide and copper thin films were potentiostatically electrodeposited in an acetate bath. Voltammetric curves were used to investigate the growth parameters; deposition potential, pH and temperature of the bath. Deposition potential dependency on the structural, morphological, optical and electronic properties of the films were investigated by the X-ray diffraction measurements, scanning electron micrographs, absorption measurements and dark and light current-voltage characterisations. It was observed that single phase polycrystalline Cu 2 O can be deposited from 0 to - 300 mV Vs saturated calomel electrode (SCE) and co-deposition of Cu and Cu 2 O starts at - 400 mV Vs SCE. Further increase in deposition potential from - 700 mV Vs SCE produces single phase Cu thin films. Single phase polycrystalline Cu 2 O thin films with cubic grains of 1-2 μm can be possible within the very narrow potential domain around - 200 mV Vs SCE. Enhanced photoresponse in a photoelectrochemical cell is produced by the Cu 2 O thin film prepared at - 400 mV Vs SCE, where Cu is co-deposited with Cu 2 O with random distribution of Cu spheres on the Cu 2 O surface. This study reveals that a single deposition bath can be used to deposit both Cu and Cu 2 O separately and an admixture of Cu-Cu 2 O by controlling the deposition parameters

Crop-Cattle Integrated Farming System: An Alternative of Climatic Change Mitigation

Directory of Open Access Journals (Sweden)

Munandar

2015-08-01

Full Text Available An integrated farming system is one of the alternatives for climatic change mitigation. This paper reports the application of corn-cattle based integrated farming system in Agrotechno Park Center of Palembang, and discusses its impact on CO2 fixation and the reduction of methane emissions. The study was based on the data of the first 6 yr from 2003 until 2009. The CO2 fixed in the soil and plants was determined based on the content of organic C which was multiplied by the index of 3.67. The methane gas produced by Balinese cattle and its dung was observed and modified into feed rations. The results showed that soil organic C increased from 40.80 tons C/ha in the 1st yr to 66.40 tons C/ha in the 6th yr. In addition, there was organic C fixation equivalent to 93.95 tons of CO2e. Corn biomass increased from 6.67 tons/ha to 18.66 tons/ha, equivalent to an increase in the fixation of atmospheric CO2e as much as 19.80 tons CO2e/ha. The supplementation of 60%-80% grass fodder with concentrate lowered the concentration of methane gas in cattle breathing by 28.7%, from 617 ppm to 440 ppm, while the methane emissions from cattle manure decreased by 31%, from 1367 mL/head/d to 943 mL/head/d. Installing a bio digester that generates biogas served to accommodate methane gas emissions from cattle dung and used it for bioenergy. Composting reduced the formation of methane gas from cattle manure through a regular process of turning over that gives aeration and forms aerobic condition in the heap of cattle dung. Recycling produces a variety of organic products that store carbon for a longer period of time and slowed the conversion of organic C into CO2. This study showed that the diverse activities of an integrated crop-cattle farming could be an alternative solution to climatic change mitigation.

Synthesis of Cu/Cu2O nanoparticles by laser ablation in deionized water and their annealing transformation into CuO nanoparticles

KAUST Repository

Gondal, M. A.; Qahtan, Talal F.; Dastageer, Mohamed Abdulkader; Maganda, Yasin W.; Anjum, Dalaver H.

2013-01-01

Nano-structured Cupric Oxide (CuO) has been synthesized using pulsed laser ablation of pure copper in water using Q-switched pulsed laser beam of 532 nm wavelength and, 5 nanosecond pulse duration and laser pulse energy of 100 mJ/pulse. In the initial unannealed colloidal suspension, the nanoparticles of Copper (Cu) and Cuprious oxide (Cu2O) were identified. Further the suspension was dried and annealed at different temperatures and we noticed the product (Cu/Cu2O) was converted predominantly into CuO at annealing temperature of 300 'C for 3 hours. As the annealing temperature was raised from 300 to 900 'C, the grain sizes of CuO reduced to the range of 9 to 26 nm. The structure and the morphology of the prepared samples were investigated using X-ray diffraction and Transmission Electron Microscope. Photoluminescence and UV absorption spectrometrystudies revealed that the band gap and other optical properties of nano-structured CuO were changed due to post annealing. Fourier transform spectrometry also confirmed the transformation of Cu/Cu2O into CuO. Copyright © 2013 American Scientific Publishers All rights reserved.

Synthesis of Cu/Cu2O nanoparticles by laser ablation in deionized water and their annealing transformation into CuO nanoparticles

KAUST Repository

Gondal, M. A.

2013-08-01

Nano-structured Cupric Oxide (CuO) has been synthesized using pulsed laser ablation of pure copper in water using Q-switched pulsed laser beam of 532 nm wavelength and, 5 nanosecond pulse duration and laser pulse energy of 100 mJ/pulse. In the initial unannealed colloidal suspension, the nanoparticles of Copper (Cu) and Cuprious oxide (Cu2O) were identified. Further the suspension was dried and annealed at different temperatures and we noticed the product (Cu/Cu2O) was converted predominantly into CuO at annealing temperature of 300 \\'C for 3 hours. As the annealing temperature was raised from 300 to 900 \\'C, the grain sizes of CuO reduced to the range of 9 to 26 nm. The structure and the morphology of the prepared samples were investigated using X-ray diffraction and Transmission Electron Microscope. Photoluminescence and UV absorption spectrometrystudies revealed that the band gap and other optical properties of nano-structured CuO were changed due to post annealing. Fourier transform spectrometry also confirmed the transformation of Cu/Cu2O into CuO. Copyright © 2013 American Scientific Publishers All rights reserved.

TPD IR studies of CO desorption from zeolites CuY and CuX

Science.gov (United States)

Datka, Jerzy; Kozyra, Paweł

2005-06-01

The desorption of CO from zeolites CuY and CuX was followed by TPD-IR method. This is a combination of temperature programmed desorption and IR spectroscopy. In this method, the status of activated zeolite (before adsorption), the process of adsorption, and the status of adsorbed molecules can be followed by IR spectroscopy, and the process of desorption (with linear temperature increase) can be followed both by IR spectroscopy and by mass spectrometry. IR spectra have shown two kinds of Cu + sites in both CuY and CuX. Low frequency (l.f.) band (2140 cm -1 in CuY and 2130 cm -1 in CuX) of adsorbed CO represents Cu + sites for which π back donation is stronger and σ donation is weaker whereas high frequency h.f. band (2160 cm -1 in CuY and 2155 cm -1 in CuX) represent Cu + sites for which π back donation is weaker and σ donation is stronger. The TPD-IR experiments evidenced that the Cu + sites represented by l.f. band bond CO more weakly than those represented by h.f. one, indicating that σ donation has more important impact to the strength of Cu +-CO bonding. On the contrary, π back donation has bigger contribution to the activation of adsorbed molecules.

Effects of Irrigation and Nitrogen Application Rates on Yield and Yield Components of Corn, Sesame and Sugar beet in Mashhad Climatic Condition

Directory of Open Access Journals (Sweden)

R Heydari Pour

2015-07-01

Full Text Available In many crops, incorrect management of nitrogen and water is one of the most important factors in the resources productivity such as water and nitrogen. In order to evaluate the effects of different nitrogen levels (zero, 50, 100 and 150 kg ha-1 and irrigation application rates (100, 75 and 50% of water requirement per species on corn, sesame and sugar beet, three separate experiments was conducted in Agricultural Research Station of Ferdowsi University of Mashhad, Iran, in 2009-2010 growing season. Three separate experiments were arranged by strip plots in randomized complete block design, with three replications. The results showed that effect of irrigation application rates on biological yield and grain number per ear and interaction effects of water × nitrogen on plant height, 100 grain weight and grain yield of corn was significant. With decreasing irrigation over 25 % water requirements, the highest grain yield (4.93 ton ha-1 in corn observed by applying nitrogen equal to 50 kg.ha-1. In addition, the highest maize yield (9.41 ton.ha-1 in mentioned was obtained by supplying 100 % water requirements. Effects of Irrigation levels on plant height and the interaction effects of water × nitrogen on 1000 grain weight in sesame was significant. Under no water stress, the highest grain yield (1.22 ton ha-1 in sesame was obtained with applying 50kg nitrogen per ha. With supplying 75% water requirements plus 50 kg nitrogen per hactar, maximum yield of sesame (820 kg ha-1 was obtained. Results of this study indicated that interaction between studied factors had insignificant effect on economic and biological yield in sugar beet. With supplying 25% water requirements plus 50 kg nitrogen per ha, maximum yield of sugar beet (58.37 ton ha-1 was achieved. It seems that suitable nitrogen management can be considered as approach in optimize the water consuming.

Efecto de la adición de una turba comercial en la asimilabilidad de cobre, zinc, hierro, manganeso de un suelo en el que se ha cultivado trigo

OpenAIRE

Almendros García, Patricia; Álvarez Álvarez, José Manuel; González Rodríguez, Demetrio; Obrador Pérez, Ana Francisca

2014-01-01

Se ha estudiado el efecto de la adición de diferentes cantidades de una turba comercial (con un 80 % de turba rubia y un 20% de turba negra) en la asimilabilidad de los elementos nutritivos en un suelo calcáreo en el que se cultivó trigo. Para ello se determinaron los contenidos en N, P y K, así como las concentraciones totales y potencialmente asimilables para las plantas de los micronutrientes Cu, Zn, Fe y Mn. También se determinó el rendimiento en grano y el índice de cosecha del cultivo d...

Electromigration in 3D-IC scale Cu/Sn/Cu solder joints

Energy Technology Data Exchange (ETDEWEB)

Ho, Cheng-En, E-mail: ceho1975@hotmail.com; Lee, Pei-Tzu; Chen, Chih-Nan; Yang, Cheng-Hsien

2016-08-15

The electromigration effect on the three-dimensional integrated circuits (3D-IC) scale solder joints with a Cu/Sn(25–50 μm)/Cu configuration was investigated using a field-emission scanning electron microscope (FE–SEM) combined with electron backscatter diffraction (EBSD) analysis system. Electron current stressing for a few days caused the pronounced accumulation of Cu{sub 6}Sn{sub 5} in specific Sn grain boundaries (GBs). The EBSD analysis indicated that both the β-Sn crystallographic orientation and GB orientation play dominant roles in this accumulation. The dependencies of the Cu{sub 6}Sn{sub 5} accumulation on the two above factors (i.e., Sn grain orientation and GB orientation) can be well rationalized via a proposed mathematic model based on the Huntington and Grone's electromigration theory with the Cu anisotropic diffusion data in a β-Sn lattice. - Highlights: • Anisotropic Cu electromigration in the 3D-IC scale microelectronic solder joints. • Pronounced accumulation of Cu{sub 6}Sn{sub 5} intermetallic in specific Sn grain boundaries. • A linear dependence of Cu{sub 6}Sn{sub 5} accumulation over the current stressing time. • β-Sn and grain boundary orientations are the dominant factors in Cu{sub 6}Sn{sub 5} accumulation.

Expression, purification, crystallization and preliminary X-ray diffraction analysis of the TonB-dependent haem outer membrane transporter ShuA from Shigella dysenteriae

International Nuclear Information System (INIS)

Brillet, Karl; Meksem, Ahmed; Thompson, Andrew; Cobessi, David

2009-01-01

ShuA from S. dysenteriae was crystallized in several crystallization conditions containing detergents. Adding heavy atoms during crystallization strongly improved the crystal quality and the resolution limits. Diffraction data were collected at an energy remote from the Pb M absorption edges. As part of efforts towards understanding the crystallization of membrane proteins and membrane transport across the outer membrane of Gram-negative bacteria, the TonB-dependent haem outer membrane transporter ShuA of Shigella dysenteriae bound to heavy atoms was crystallized in several crystallization conditions using detergents. The insertion of a His 6 tag into an extracellular loop of ShuA, instead of downstream of the Escherichia coli peptide signal, allowed efficient targeting to the outer membrane and the rapid preparation of crystallizable protein. Crystals diffracting X-rays beyond 3.5 Å resolution were obtained by co-crystallizing ShuA with useful heavy atoms for phasing (Eu, Tb, Pb) by the MAD method at the synchrotron, and the SAD or SIRAS method at the Cu wavelength. The authors collected X-ray diffraction data at 2.3 Å resolution using one crystal of ShuA-Pb, and at 3.2 Å resolution at an energy remote from the Pb M absorption edges for phasing on PROXIMA-1 at SOLEIL

La pisciculture de Tilapia nilotica (= Sarotherodon niloticus dans les eaux continentales de Côte d'Ivoire

Directory of Open Access Journals (Sweden)

Vincke, P.

1985-01-01

Full Text Available The fishculture of Tilapia niloiica (Sarotherodon niloticus in freshwater of Ivory Coast. In Ivory Coast, the freshwater fishculture in rural areas is mainly on a small scale. This type of breeding in ponds (2 to 4 ares yields on an average 3 metric tons of fish/ha/year and represents only an activity with self-consumption of products. The yield in intensive pond fishculture Tilapia nilotica is on an average 6 to 7 metric tons/ha/year but yields bigger than 10 metric tons/ha/year are not uncommon. The intensive fishculture in floating cages, requiring a minor investment but a more improved formation than in fischculture, yields on an average about 30 to 40 kg/m3/year. However the effective development of this activity rests on the resolution of problems like the sufficient fry production, the feeding and the commercialization.

Evaluaciones calorimétricas de la precipitación en aleaciones Cu-Co-Si, ricas en Cu

Directory of Open Access Journals (Sweden)

Donoso, Eduardo

2001-08-01

las fracciones volumétricas de los precipitados. Las energías de activación de ambas reacciones, calculadas por el método de Kissinger, son consistentes con aquellas correspondientes a la difusión de Co en Cu y Si en Cu, respectivamente. Ambos procesos pueden ser descritos mediante la ecuación de Johnson-Mehl-Avrami (JMA, cuyos valores de n son cornpatibles con la nucleación de precipitados a partir de la solución sólida (etapa 1 y con crecimiento de partículas a partir de precipitados preha estimado la cinética de decaimiento de la concentración de Co y Si en la matriz en función de la fracción transformada para cada evento térmico y sus respectivas fracciones volumétricas.

Effect of 67Cu and 99Mo labeled tetrathiomolybdate on the distribution of 67Cu, Cu, and 99Mo in bile fractions in sheep

International Nuclear Information System (INIS)

Gooneratne, R.; Laarveld, B.; Christensen, D.

1989-01-01

The effect of intravenous administration of 67 Cu and 99 Mo labeled tetrathiomolybdate (TTM) on the appearance of 67 Cu, stable Cu, and 99 Mo in gel chromatographic fractions of bile was examined in sheep fed either 5 or 35 mg Cu kg-1 DM. Peak excretory periods of biliary 67 Cu, stable Cu, and 99 Mo were observed at 30 min-1.25 hr, 2-3 hr, and 11-13 hr after 67 Cu and after 99 Mo labeled TTM. Sephadex G-75 gel filtration of bile samples collected at 1, 3, and 12 hr after 67 Cu administration revealed two major protein peaks of molecular weights of greater than 80,000 (peak I) and 7,000 (peak II) containing both 67 Cu and Cu. But the ratio of 67 Cu in the two peaks varied with time of bile collection. The ratio of areas of peak I:II 1 hr after 67 Cu administration was approximately 0.48; at 3 hr, 0.62, and at 12 hr 1.35. Tetrathiomolybdate administration increased both 67 Cu and stable Cu in bile by severalfold and induced a major shift of Cu into the higher molecular weight protein fraction. The experiments confirm the effectiveness of TTM as a ''decoppering'' agent. Furthermore, TTM not only promoted bile Cu excretion, but it also increased the incorporation of Cu into the macromolecular fraction. This may limit enterohepatic circulation of biliary Cu and thereby cause an overall Cu depletion and a negative Cu balance

Characterization of Cu-exchanged SSZ-13: a comparative FTIR, UV-Vis, and EPR study with Cu-ZSM-5 and Cu-β with similar Si/Al and Cu/Al ratios

DEFF Research Database (Denmark)

Giordanino, Filippo; Vennestrøm, Peter N. R.; Lundegaard, Lars Fahl

2013-01-01

concentration of reduced copper centres, i.e. isolated Cu+ ions located in different environments, able to form Cu+(N2), Cu+(CO)n (n = 1, 2, 3), and Cu+(NO)n (n = 1, 2) upon interaction with N2, CO and NO probe molecules, respectively. Low temperature FTIR, DRUV-Vis and EPR analysis on O2 activated samples...... an intense and finely structured d–d quadruplet, unique to Cu-SSZ-13, which is persistent under SCR conditions. This differs from the 22 700 cm−1 band of the mono(μ-oxo)dicopper species of the O2 activated Cu-ZSM-5, which disappears under SCR conditions. The EPR signal intensity sets Cu-β apart from...

Hi ha un paper per a l'ètica a l'empresa?

OpenAIRE

Argandoña Rámiz, Antonio

2001-01-01

No hi ha decisions ètiques i decisions no ètiques. Hi ha decisions: l'ètica és, simplement, un component més de cada decisió —i, per tant, molt important. No hi ha directors d'empresa ètics i altres que no ho són: hi ha directors que dirigeixen bé, i directors que dirigeixen malament. Els que dirigeixen bé són ètics. Si no són ètics, estan perdent algun aspecte de la realitat que és necessari per a la seva tasca de dirigir: per tant, dirigeixen malament. Però, a més a més, ser ètic no és tan ...

Characterization of p-CuI prepared by the SILAR technique on Cu-tape/n-CuInS{sub 2} for solar cells

Energy Technology Data Exchange (ETDEWEB)

Sankapal, B.R. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany)]. E-mail: brsankapal@rediffmail.com; Ennaoui, A. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany); Guminskaya, T. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany); Dittrich, Th. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany); Bohne, W. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany); Roehrich, J. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany); Strub, E. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany); Lux-Steiner, M.Ch. [Hahn-Meitner-Institut, Glienicker Strasse 100, D-14109, Berlin (Germany)

2005-06-01

CuI has been synthesized at room temperature on Cu-tape/n-CuInS{sub 2} by using the SILAR technique (successive ionic layer adsorption and reaction). The influence of wet chemical iodine treatment on the CuI has been investigated in more detail. The films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), elastic recoil detection analysis (ERDA) and surface photovoltage (SPV) techniques. The CuI films contain the no. gammano. -phase of the Zinkblende structure. The crystallites are preferentially oriented in the (111) direction. After wet chemical iodine treatment, the fibrous surface morphology changed to a more dense CuI film with larger crystallites. Oxides could not be detected on the CuI surface. The density of surface states of CIS decreased after the CuI deposition. The importance of the wet chemical iodine treatment for the performance of Cu-tape/n-CuInS{sub 2}/p-CuI solar cells has been demonstrated.

Modeling of solvent extraction equilibrium of Cu(II from sulphuric Acid solution with MOC-55TD

Directory of Open Access Journals (Sweden)

Alguacil, F. J.

1999-06-01

Full Text Available The extraction of Cu(II from acidic sulphate aqueous solutions using the commercial MOC-55TD extractant is studied. A predictive model, which consists in a set of non-linear mass action and mass balance equations is proposed. The model was solved using a tailor-made equation-solving program. The extraction of copper can be described by the formation of CuR₂ species (log K_ext= 0.717 ± 0.03 in the organic phase. The copper equilibrium isotherm was also obtained at 20°C.

Se estudia la extracción de Cu(II de disoluciones acuosas acidas, en medio sulfato, mediante la oxima comercial MOC-55TD. Se propone un modelo para predecir la extracción del metal; este modelo consiste en una serie de ecuaciones no lineales de acción de masas y balance de masas. El modelo se resolvió empleando un programa de ordenador específicamente definido para este tipo de equilibrios. La extracción de cobre se describe por la formación de la especie CuR₂ (log K_ext= 0,717 ± 0,03 en la fase orgánica. Se ha obtenido la isoterma de extracción de cobre a 20 °C.

Direct Observation of Reduction of Cu(II) to Cu(I) by Terminal Alkynes

Energy Technology Data Exchange (ETDEWEB)

Zhang, Guanghui; Yi, Hong; Zhang, Guoting; Deng, Yi; Bai, Ruopeng; Zhang, Heng; Miller, Jeffrey T.; Kropf, Arthur J.; Bunel, Emilio E.; Lei, Aiwen

2014-01-06

ABSTRACT: X-ray absorption spectroscopy and in situ electron paramagnetic resonance evidence were provided for the reduction of Cu(II) to Cu(I) species by alkynes in the presence of tetramethylethylenediamine (TMEDA), in which TMEDA plays dual roles as both ligand and base. The structures of the starting Cu(II) species and the obtained Cu(I) species were determined as (TMEDA)- CuCl2 and [(TMEDA)CuCl]2 dimer, respectively.

New Production Routes for Medical Isotopes 64Cu and 67Cu Using Accelerator Neutrons

Science.gov (United States)

Kin, Tadahiro; Nagai, Yasuki; Iwamoto, Nobuyuki; Minato, Futoshi; Iwamoto, Osamu; Hatsukawa, Yuichi; Segawa, Mariko; Harada, Hideo; Konno, Chikara; Ochiai, Kentaro; Takakura, Kosuke

2013-03-01

We have measured the activation cross sections producing 64Cu and 67Cu, promising medical radioisotopes for molecular imaging and radioimmunotherapy, by bombarding a natural zinc sample with 14 MeV neutrons. We estimated the production yields of 64Cu and 67Cu by fast neutrons from \\text{natC(d,n) with 40 MeV 5 mA deuterons. We used the present result together with the evaluated cross section of Zn isotopes. The calculated 64Cu yield is 1.8 TBq (175 g 64Zn) for 12 h of irradiation; the yields of 67Cu by 67Zn(n,p)67Cu and 68Zn(n,x)67Cu were 249 GBq (184 g 67Zn) and 287 GBq (186 g 68Zn) at the end of 2 days of irradiation, respectively. From the results, we proposed a new route to produce 67Cu with very little radionuclide impurity via the 68Zn(n,x)67Cu reaction, and showed the 64Zn(n,p)64Cu reaction to be a promising route to produce 64Cu. Both 67Cu and 64Cu are noted to be produced using fast neutrons.

The influence of dietary Cu and diabetes on tissue 67Cu retention kinetics in rats

International Nuclear Information System (INIS)

Uriu-Hare, J.Y.; Rucker, R.B.; Keen, C.L.

1991-01-01

Compared to controls, diabetes results in higher plasma, liver and kidney Cu concentrations. Since alterations in Cu metabolism may be associated with diabetic pathology, the authors investigated how Cu metabolism is affected by diabetes and dietary Cu intake. Nondiabetic and STZ diabetic rats were fed Cu suppl. or Cu def. diets for 5 wks. Rats were intubated with 28 μCi 67 Cu and killed after 8, 16, 24, 32, 64, or 128 h. There were marked effects of both diet and diabetes on 67 Cu metabolism. Independent of diabetes, deficient rats had a higher % of retained 67 Cu, in liver, plasma, RBC, muscle, spleen, brain, lung, uterus, and intestine than adequate Cu rats. Independent of dietary Cu, diabetic rats had a lower % of retained 67 Cu in liver, plasma, RBC, muscle, spleen, lung, bone, pancreas, skin, uterus and heart than controls. Differential effects were noted for kidney; adequate Cu diabetic rats had a higher % of retained 67 Cu than all other groups. Marked effects of both diet and diabetes were evident when tissue Cu turnover was examined. Compared to Cu suppl. rats, Cu def. rats had a slower turnover of 67 Cu, in liver, plasma, intestine, pancreas, eye, brain, muscle, spleen, lung and heart. Diabetic rats had a slower turnover of 67 Cu than nondiabetic rats in liver, plasma, intestine, pancreas, eye, kidney, RBC and uterus. The data imply that a focus on Cu metabolism with regard to cellular Cu trafficking and pathology may be warranted

Investigation of ore processing to recover uranium concentrate from sandstone of Pa Lua area on scale of 2 tons of ore per batch

International Nuclear Information System (INIS)

Cao Hung Thai; Dinh Manh Thang; Tran Van Son; Le Quang Thai; Bui Dang Hanh; Hoang Bich Ngoc; Nguyen Hong Ha; Phung Vu Phong; Nguyen Khac Tuan

2003-01-01

Based on the laboratory results, a system for testing on scale of 2 tons uranium ore per batch including following parts was established: equipment for crushing and grinding, equipment for acid leaching, equipment for impurity precipitation and filtration and drying. the results of testing by 2 tons ore per batch scale shown that uranium recovery in the leach circuit were achieved of at least 90% under following conditions: The supplying rate of leach agent 50-701/m 2 .h, sandstone is mixed or incubated with acid before the percolation. About 23 kg filter cake per m 3 solution were disposed as tailings. Flocculants N101, A101 (TOAGOSEL, Japan) were used for improvement of filtration and washing capacity of impurity precipitation. Uranium peroxide was precipitated with addition of hydrogen peroxide. The underflow solids were filtered and calcined. The product contained min. 76% U 3 O 8 . The water recycle was successfully tested. That results in minimization of water addition to only 0.3m 3 /ton of ore. Experimental results on 2 tons scale showed that the proposed processing flow sheet using direct precipitation can meet all environmental and technical objectives. (CHT)

Copper interactions in TlCu7S4 and TlCu7Se4

International Nuclear Information System (INIS)

Noren, L.; Delaplane, R.G.; Berger, R.

1999-01-01

Complete text of publication follows. The copper chalcogenides ACu 7 S 4 (A=NH 4 + , Tl + , Rb + ) are quasi-one-dimensional metals at ambient and higher temperatures which is due to the high mobility of copper in these structures. TlCu 7 S 4 and TlCu 7 Se 4 are isostructural compounds, space group I4/m, which can be described on the basis of a TlX 8 cube with two different Cu sites, Cu(1) and Cu(2). Cu(2)-Cu(2) zigzag chains run along the c axis with only 3/4 occupation of the Cu(2) sites. However, these two compounds differ in behaviour on cooling. The sulphide shows a polymorphic first-order transition to the CsAg 7 S 4 type (P4/n) owing to ordering of the vacancies in the Cu(2)-Cu(2) chains. In order to study the nature of the Cu(2) order/disorder in the two title compounds, a series of neutron diffraction measurements (both Bragg and diffuse scattering) were made at several temperatures from 40 to 713 K on the instrument SLAD at Studsvik. The structure at each temperature was modelled using RMC techniques. The resulting configuration show that as the temperature increases, there is a marked increase in the mobility of the Cu atoms in the Cu(2)-Cu(2) chains for TlCu 7 S 4 but not for TlCu 7 Se 4 . This is due to the initial difference in the Cu(2)-Cu(2) distances, only 2.2A for the thiocuprate, but 2.7A in the selenocuprate which explains the relative ease for Cu(2) ordering in the latter case. (author)

Behavior of CuP and OFHC Cu anodes under electrodeposition conditions

Energy Technology Data Exchange (ETDEWEB)

Frankel, G.S.; Schrott, A.G.; Horkans, J.; Andricacos, P.C. (International Business Machines Corp., Yorktown Heights, NY (United States). Thomas J. Watson Research Center); Isaacs, H.S. (Brookhaven National Lab., Upton, NY (United States))

1992-01-01

Films formed on CuP (with 0.05 wt % P) and OFHC Cu anodes in electroplating solutions were studied by X-ray Photoelectron Spectroscopy, X-ray Absorption Spectroscopy, electrochemical methods, and a newly developed gravimetric technique. The black film formed on CuP in Cl-containing solutions was found to resemble a porous sponge composed of CuCl but laden/with concentrated CuSO{sub 4} solution. The difference between the buoyancy-corrected measured mass change and the charge-equivalent mass change was found to have two components: a reversible part that comes and goes as the current is turned on and off, and an irreversible part that remains on the surface and increase in mass with time. The irreversible part results from the anodic film, which increases linearly with charge density but independent of current density. The reversible part of the mass change arises from the weight of the diffusion layer. In contrast to CuP, OFHC Cu releases much more Cu{sup +1} during anodic polarization and forms a poorly-adherent anodic film that is considerably heavier than the black film for a given charge density.

Behavior of CuP and OFHC Cu anodes under electrodeposition conditions

Energy Technology Data Exchange (ETDEWEB)

Frankel, G.S.; Schrott, A.G.; Horkans, J.; Andricacos, P.C. [International Business Machines Corp., Yorktown Heights, NY (United States). Thomas J. Watson Research Center; Isaacs, H.S. [Brookhaven National Lab., Upton, NY (United States)

1992-08-01

Films formed on CuP (with 0.05 wt % P) and OFHC Cu anodes in electroplating solutions were studied by X-ray Photoelectron Spectroscopy, X-ray Absorption Spectroscopy, electrochemical methods, and a newly developed gravimetric technique. The black film formed on CuP in Cl-containing solutions was found to resemble a porous sponge composed of CuCl but laden/with concentrated CuSO{sub 4} solution. The difference between the buoyancy-corrected measured mass change and the charge-equivalent mass change was found to have two components: a reversible part that comes and goes as the current is turned on and off, and an irreversible part that remains on the surface and increase in mass with time. The irreversible part results from the anodic film, which increases linearly with charge density but independent of current density. The reversible part of the mass change arises from the weight of the diffusion layer. In contrast to CuP, OFHC Cu releases much more Cu{sup +1} during anodic polarization and forms a poorly-adherent anodic film that is considerably heavier than the black film for a given charge density.

In Situ Study of Reduction Process of CuO Paste and Its Effect on Bondability of Cu-to-Cu Joints

Science.gov (United States)

Yao, Takafumi; Matsuda, Tomoki; Sano, Tomokazu; Morikawa, Chiaki; Ohbuchi, Atsushi; Yashiro, Hisashi; Hirose, Akio

2018-04-01

A bonding method utilizing redox reactions of metallic oxide microparticles achieves metal-to-metal bonding in air, which can be alternative to lead-rich high-melting point solder. However, it is known that the degree of the reduction of metallic oxide microparticles have an influence on the joint strength using this bonding method. In this paper, the reduction behavior of CuO paste and its effect on Cu-to-Cu joints were investigated through simultaneous microstructure-related x-ray diffraction and differential scanning calorimetry measurements. The CuO microparticles in the paste were gradually reduced to submicron Cu2O particles at 210-250°C. Subsequently, Cu nanoparticles were generated instantaneously at 300-315°C. There was a marked difference in the strengths of the joints formed at 300°C and 350°C. Thus, the Cu nanoparticles play a critical role in sintering-based bonding using CuO paste. Furthermore, once the Cu nanoparticles have formed, the joint strength increases with higher bonding temperature (from 350°C to 500°C) and pressure (5-15 MPa), which can exceed the strength of Pb-5Sn solder at higher temperature and pressure.

Preparation and characterization of NiW-nHA composite catalyst for hydrocracking

Science.gov (United States)

Zhou, Gang; Hou, Yongzhao; Liu, Lei; Liu, Hongru; Liu, Can; Liu, Jing; Qiao, Huiting; Liu, Wenyong; Fan, Yubo; Shen, Shituan; Rong, Long

2012-11-01

The synthesis, characterization and catalytic capability of the NiW-nano-hydroxyapatite (NiW-nHA) composite were investigated in this paper. The NiW-nHA catalyst was prepared by a co-precipitation method. Then Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDX) were used to analyze this material. In addition, the catalytic capacity of the NiW-nHA composite was also examined by FT-IR and gas chromatography (GC). The results of FT-IR analysis indicated that Ni, W and nHA combined closely. TEM observation revealed that this catalyst was needle shaped and the crystal retained a nanometer size. XRD data also suggested that a new phase of CaWO4 appeared and the lattice parameters of nHA changed in this system. nHA was the carrier of metals. The rates of Ni/W-loading were 73.24% and 65.99% according to the EDX data, respectively. Furthermore, the conversion of 91.88% Jatropha oil was achieved at 360 °C and 3 MPa h-1 over NiW-nHA catalyst. The straight chain alkanes ranging from C15 to C18 were the main components in the production. The yield of C15-C18 alkanes was up to 83.56 wt%. The reaction pathway involved hydrocracking of the C&z.dbd;C bonds of these triglycerides from Jatropha oil. This paper developed a novel non-sulfided catalyst to obtain a ``green biofuel'' from vegetable oil.

CuGaTe2-CuAlTe2 system

International Nuclear Information System (INIS)

Bodnar', I.V.

2003-01-01

The results of studies on the chemical interaction in the CuGaTe 2 -CuAlTe 2 as well as on the thermal and optical properties of the formed solid solutions are presented. It is shown, that continuous number of solid solutions are formed in the CuGaTe 2 -CuAlTe 2 system, which crystallize in the chalcopyrite structure. The diagram of state of this system is plotted. The thermal expansion of these materials is studied through the dilatometric method. The linear dependence of the thermal expansion coefficient on the composition is established. The concentration dependences of the forbidden zone width diverge from the linearity [ru

The effect of inducing uniform Cu growth on formation of electroless Cu seed layer

International Nuclear Information System (INIS)

Lim, Taeho; Kim, Myung Jun; Park, Kyung Ju; Kim, Kwang Hwan; Choe, Seunghoe; Lee, Young-Soo; Kim, Jae Jeong

2014-01-01

The uniformity of Cu growth on Pd nanocatalysts was controlled by using organic additives in the formation of electroless Cu seed layers. Polyethylene glycol (PEG, Mw. 8000) not only reduced the deposition rate but also improved the uniformity of Cu growth on each Pd nanocatalyst during the seed layer formation. The stronger suppression effect of PEG on Cu than on Pd reduced the difference in the deposition rate between the two surfaces, resulting in the uniform deposition. Meanwhile, bis(3-sulfopropyl) disulfide degraded the uniformity by strong and nonselective suppression. The sheet resistance measurement and atomic force microscopy imaging revealed that the uniform Cu growth by PEG was more advantageous for the formation of a thin and smooth Cu seed layer than the non-uniform growth. The uniform Cu growth also had a positive influence on the subsequent Cu electrodeposition: the 60-nm-thick electrodeposited Cu film on the Cu seed layer showed low resistivity (2.70 μΩ·cm), low surface roughness (6.98 nm), and good adhesion strength. - Highlights: • Uniform Cu growth on Pd was achieved in formation of electroless Cu seed layer. • PEG addition to electroless bath improved the uniformity of Cu growth on Pd. • A thin, smooth and continuous Cu seed layer was obtained with PEG. • Adhesion strength of the Cu seed layer was also improved with PEG. • The uniformity improvement positively affected subsequent Cu electrodeposition

Colloidal synthesis of Cu-ZnO and Cu@CuNi-ZnO hybrid nanocrystals with controlled morphologies and multifunctional properties

Science.gov (United States)

Zeng, Deqian; Gong, Pingyun; Chen, Yuanzhi; Zhang, Qinfu; Xie, Qingshui; Peng, Dong-Liang

2016-06-01

Metal-semiconductor hybrid nanocrystals have received extensive attention owing to their multiple functionalities which can find wide technological applications. The utilization of low-cost non-noble metals to construct novel metal-semiconductor hybrid nanocrystals is important and meaningful for their large-scale applications. In this study, a facile solution approach is developed for the synthesis of Cu-ZnO hybrid nanocrystals with well-controlled morphologies, including nanomultipods, core-shell nanoparticles, nanopyramids and core-shell nanowires. In the synthetic strategy, Cu nanocrystals formed in situ serve as seeds for the heterogeneous nucleation and growth of ZnO, and it eventually forms various Cu-ZnO hetero-nanostructures under different reaction conditions. These hybrid nanocrystals possess well-defined and stable heterostructure junctions. The ultraviolet-visible-near infrared spectra reveal morphology-dependent surface plasmon resonance absorption of Cu and the band gap absorption of ZnO. Furthermore, we construct a novel Cu@CuNi-ZnO ternary hetero-nanostructure by incorporating the magnetic metal Ni into the pre-synthesized colloidal Cu nanocrystals. Such hybrid nanocrystals possess a magnetic Cu-Ni intermediate layer between the ZnO shell and the Cu core, and exhibit ferromagnetic/superparamagnetic properties which expand their functionalities. Finally, enhanced photocatalytic activities are observed in the as-prepared non-noble metal-ZnO hybrid nanocrystals. This study not only provides an economical way to prepare high-quality morphology-controlled Cu-ZnO hybrid nanocrystals for potential applications in the fields of photocatalysis and photovoltaic devices, but also opens up new opportunities in designing ternary non-noble metal-semiconductor hybrid nanocrystals with multifunctionalities.Metal-semiconductor hybrid nanocrystals have received extensive attention owing to their multiple functionalities which can find wide technological applications

Investigation of microstructure and mechanical properties of PLLA/HA system

Science.gov (United States)

Nik Hanyn N., H.; Ahmad, K. Z. Ku; Yusof, Mohd Reusmaazran; Kamarolzaman, A. A.

2017-12-01

The poly(L-lactide) (PLLA), carboxymethyl starch (CMS) and hydroxyapatite (HAp) nanofibers have been prepared by electrospinning technique. The PLLA/CMS formulations applied at various voltage were studied for electrospinning into nanofibers. It was found that the morphology of the fibers became finer with the increment of voltage applied. The formulation with 10 kV voltage was selected as it shows promising result based on the morphology observation. The PLLA/CMS/HA formulation with HA loading concentration (i.e. 0.25, 0.50, 0.75 and 1.00 wt%) was fabricated in the next stage, and the effect of HA addition was studied. Observation showed that the electrospun nanofibers' diameters were reduced with the addition of HAp concentration from 0.25 wt% HAp to 1.00 wt% Hap.

Assessment of a novel alder biorefinery concept to meet demands of economics feasibility, energy production and long term environmental sustainability

DEFF Research Database (Denmark)

Thomsen, Tobias; Ahrenfeldt, Jesper; Thomsen, Sune Tjalfe

2012-01-01

system Energy Return on energy Invested 4.4, total system Exergy Return on exergy Invested 3.5, Net Energy Output 78 GJ/ha/year, Net Exergy Output 50 GJ/ha/year, Net carbon sequestration 0.8 ton CO2-eq/ha/year, Total product value 2030 euro/ha/year and Net Dry Matter Removal 90%....

Matrix model and time-like linear dila ton matter

International Nuclear Information System (INIS)

Takayanagi, Tadashi

2004-01-01

We consider a matrix model description of the 2d string theory whose matter part is given by a time-like linear dilaton CFT. This is equivalent to the c=1 matrix model with a deformed, but very simple Fermi surface. Indeed, after a Lorentz transformation, the corresponding 2d spacetime is a conventional linear dila ton background with a time-dependent tachyon field. We show that the tree level scattering amplitudes in the matrix model perfectly agree with those computed in the world-sheet theory. The classical trajectories of fermions correspond to the decaying D-boranes in the time-like linear dilaton CFT. We also discuss the ground ring structure. Furthermore, we study the properties of the time-like Liouville theory by applying this matrix model description. We find that its ground ring structure is very similar to that of the minimal string. (author)

Phase relationships in Cu-rich corner of the Cu-Cr-Zr phase diagram

International Nuclear Information System (INIS)

Zeng, K.J.; Haemaelaeinen, M.; Lilius, K.

1995-01-01

In the available experimental information on the Cu-Cr-Zr ternary system, there exist different opinions concerning the phase relationships in the Cu-rich corner of Cu-Cr-Zr phase diagram. Glazov et al. and Zakharov et al. investigated the Cu-rich corner of the Cu-Cr-Zr phase diagram within the composition range up to 3.5 Cr and 3.5 Zr (wt. %). A quasi-eutectic reaction L → (Cu) + αCr 2 Zr was observed to occur at 1,020 C and several isothermal sections were constructed within the temperature range from 600 to 1,000 C to show the (Cu)-αCr 2 Zr two phase equilibrium. Therefore, a pseudobinary Cu-Cr 2 Zr system was supposed. Afterwards, Dawakatsu et al, Fedorov et al, and Kuznetsov et al studied the cu-rich corner of the phase diagram in a wider composition range up to 5 Cr and 20 Zr (at.%). Contrary to Glazov et al. and Zakharov et al., they found no Cr 2 Zr phase in their samples. Hence, the pseudobinary Cu-Cr 2 Zr system does not exist. In this study an experimental investigation is presented on the phase relationships in Cu-rich corner of the Cu-Cr-Zr phase diagram at 940 C in order to clear up the confusion

Hydrodynamic evolution and jet energy loss in Cu + Cu collisions

International Nuclear Information System (INIS)

Schenke, Bjoern; Jeon, Sangyong; Gale, Charles

2011-01-01

We present results from a hybrid description of Cu + Cu collisions using (3 + 1)-dimensional hydrodynamics (music) for the bulk evolution and a Monte Carlo simulation (martini) for the evolution of high-momentum partons in the hydrodynamical background. We explore the limits of this description by going to small system sizes and determine the dependence on different fractions of wounded nucleon and binary collisions scaling of the initial energy density. We find that Cu + Cu collisions are well described by the hybrid description at least up to 20% central collisions.

Massive spalling of Cu-Zn and Cu-Al intermetallic compounds at the interface between solders and Cu substrate during liquid state reaction

Science.gov (United States)

Kotadia, H. R.; Panneerselvam, A.; Mokhtari, O.; Green, M. A.; Mannan, S. H.

2012-04-01

The interfacial intermetallic compound (IMC) formation between Cu substrate and Sn-3.8Ag-0.7Cu-X (wt.%) solder alloys has been studied, where X consists of 0-5% Zn or 0-2% Al. The study has focused on the effect of solder volume as well as the Zn or Al concentration. With low solder volume, when the Zn and Al concentrations in the solder are also low, the initial Cu-Zn and Al-Cu IMC layers, which form at the solder/substrate interface, are not stable and spall off, displaced by a Cu6Sn5 IMC layer. As the total Zn or Al content in the system increases by increasing solder volume, stable CuZn or Al2Cu IMCs form on the substrate and are not displaced. Increasing concentration of Zn has a similar effect of stabilizing the Cu-Zn IMC layer and also of forming a stable Cu5Zn8 layer, but increasing Al concentration alone does not prevent spalling of Al2Cu. These results are explained using a combination of thermodynamic- and kinetics-based arguments.

Mao & Püha Eliisabet / Jüri Kuuskemaa

Index Scriptorium Estoniae

Kuuskemaa, Jüri, 1942-

2000-01-01

Kadrioru lossis Väliskunstimuuseumi ekspositsioonis olevast antikvaar August Käbi pärandist pärit maalist. Kunstiteadlase Mai Levini arvates võib maali autoriks olla Rooma kunstnik Tommaso Salini, hüüdnimega Mao. Maali süzee: "Püha Eliisabeti kuulutus". 1 ill

Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis.

Science.gov (United States)

Gawande, Manoj B; Goswami, Anandarup; Felpin, François-Xavier; Asefa, Tewodros; Huang, Xiaoxi; Silva, Rafael; Zou, Xiaoxin; Zboril, Radek; Varma, Rajender S

2016-03-23

The applications of copper (Cu) and Cu-based nanoparticles, which are based on the earth-abundant and inexpensive copper metal, have generated a great deal of interest in recent years, especially in the field of catalysis. The possible modification of the chemical and physical properties of these nanoparticles using different synthetic strategies and conditions and/or via postsynthetic chemical treatments has been largely responsible for the rapid growth of interest in these nanomaterials and their applications in catalysis. In addition, the design and development of novel support and/or multimetallic systems (e.g., alloys, etc.) has also made significant contributions to the field. In this comprehensive review, we report different synthetic approaches to Cu and Cu-based nanoparticles (metallic copper, copper oxides, and hybrid copper nanostructures) and copper nanoparticles immobilized into or supported on various support materials (SiO2, magnetic support materials, etc.), along with their applications in catalysis. The synthesis part discusses numerous preparative protocols for Cu and Cu-based nanoparticles, whereas the application sections describe their utility as catalysts, including electrocatalysis, photocatalysis, and gas-phase catalysis. We believe this critical appraisal will provide necessary background information to further advance the applications of Cu-based nanostructured materials in catalysis.

Prediction of IOI-HA Scores Using Speech Reception Thresholds and Speech Discrimination Scores in Quiet

DEFF Research Database (Denmark)

Brännström, K Jonas; Lantz, Johannes; Nielsen, Lars Holme

2014-01-01

), and speech discrimination scores (SDSs) in quiet or in noise are common assessments made prior to hearing aid (HA) fittings. It is not known whether SRT and SDS in quiet relate to HA outcome measured with the International Outcome Inventory for Hearing Aids (IOI-HA). PURPOSE: The aim of the present study...... COLLECTION AND ANALYSIS: The psychometric properties were evaluated and compared to previous studies using the IOI-HA. The associations and differences between the outcome scores and a number of descriptive variables (age, gender, fitted monaurally/binaurally with HA, first-time/experienced HA users, years...

Cu uptake and turnover in both Cu-acclimated and non-acclimated rainbow trout (Oncorhynchus mykiss)

DEFF Research Database (Denmark)

Grosell, M.; Hogstrand, C.; Wood, C.M.

1997-01-01

-acclimation clearly involves changes in copper accumulation kinetics in the plasma. The acclimated fish showed a 65% reduced Cu-64 accumulation after 65 h and an increased turnover of Cu in the plasma compared to the non-acclimated fish. Total Cu in the plasma increased by 59% after 3 h of exposure in the non...... aortic catheter. By measuring both Cu-64 accumulation and total Cu concentrations, we were able to analyse the ongoing uptake and turnover of ambient Cu, independent of any Cu already present in the fish. Plasma accounted for at least 90% of the Cu-64 labelled Cu present in the blood and Cu...... h of exposure. Acclimation did not have an unambiguous effect on branchial Cu uptake and differences in branchial uptake could not explain the reduced accumulation in the plasma. The rapidly exchangeable Cu pools were 54% in the gills and 33% in the liver, suggesting a considerable hepatic Cu...

El griot no ha muerto, viva el hip-hop

Directory of Open Access Journals (Sweden)

Fco. Javier González García-Mamely

2015-11-01

Full Text Available La oratura en África ha jugado un papel vital a lo largo de los milenios como un (único medio de preservar y transmitir la historia, la cultura y el imaginario de cada comunidad. El griot es un claro modelo de las artes orales, pero ha sufrido cambios drásticos en su modo de vida y en los recursos narrativos de los que dispone. Tras el mecenazgo de los grandes reyes y las sucesivas llegadas del islam, el colonialismo y los procesos de modernización y occidentalización, los griots se han tenido que adaptar a nuevos patrones, audiencias y medios de comunicación, convirtiéndose en políticos o en figuras del espectáculo. La aparición del rap y el hip-hop reclamando ser los “modernos griots” ha ocasionado una respuesta crítica y una atracción viral hacia el nuevo fenómeno, sea éste un nuevo género o una reinvención de la oratura del antiguo griot.

Changes of serum HA and LN level in patients with pulmonary tuberculosis after therapy

International Nuclear Information System (INIS)

Yu Jing Zhang Hongwei; Li Jie

2007-01-01

Objective: To study the serum HA and LN level in patients with pulmonary tuberculosis and their response to therapy. Methods: Serum HA and LN levels were measured with RIA in: (1) 42 patients with active pulmonary tuberculosis both before and after 2 months' therapy, (2) 40 patients with non-active pulmonary TB and 330 controls. Results: The serum HA and LN level in patients with active pulmonary tubemulosis were significantly higher than those in controls (P < 0.01 ), while no significant difference could Be found Between the levels in patients with non-active pulmonary tuberculosis and controls. The serum HA and LN level in patients with active pulmonary tuberculosis dropped after therapy, but were still higher than those in controls. Significant correlation could Be found between HA and LN levels (P<0.01). The HA and LN levels were positively correlated with severity of the disease, ESR and CRP contents. Conclusion: The measurement of serum HA and LN is valuable for early diagnosis, monitoring development and assessment of therapeutic effect in patients with pulmonary tubemulosis. (authors)

Bimetallic AgCu/Cu2O hybrid for the synergetic adsorption of iodide from solution.

Science.gov (United States)

Mao, Ping; Liu, Ying; Liu, Xiaodong; Wang, Yuechan; Liang, Jie; Zhou, Qihang; Dai, Yuexuan; Jiao, Yan; Chen, Shouwen; Yang, Yi

2017-08-01

To further improve the capacity of Cu 2 O to absorb I - anions from solution, and to understand the difference between the adsorption mechanisms of Ag/Cu 2 O and Cu/Cu 2 O adsorbents, bimetallic AgCu was doped into Cu 2 O through a facile solvothermal route. Samples were characterized and employed to adsorb I - anions under different experimental conditions. The results show that the Cu content can be tuned by adding different volumes of Ag sols. After doping bimetallic AgCu, the adsorption capacity of the samples can be increased from 0.02 mmol g -1 to 0.52 mmol g -1 . Moreover, the optimal adsorption is reached within only 240 min. Meanwhile, the difference between the adsorption mechanisms of Ag/Cu 2 O and Cu/Cu 2 O adsorbents was verified, and the cooperative adsorption mechanism of the AgCu/Cu 2 O hybrid was proposed and verified. In addition, the AgCu/Cu 2 O hybrid showed excellent selectivity, e.g., its adsorption efficiencies are 85.1%, 81.9%, 85.9% and 85.7% in the presence of the Cl - , CO 3 2- , SO 4 2- and NO 3 - competitive anions, respectively. Furthermore, the AgCu/Cu 2 O hybrid can worked well in other harsh environments (e.g., acidic, alkaline and seawater environments). Therefore, this study is expected to promote the development of Cu 2 O into a highly efficient adsorbent for the removal of iodide from solution. Copyright © 2017 Elsevier Ltd. All rights reserved.

EMISI CO2 TANAH AKIBAT ALIH FUNGSI LAHAN HUTAN RAWA GAMBUT DI KALIMANTAN BARAT (Soil Emissions of CO2 Due to Land Use Change of Peat Swamp Forest at West Kalimantan

Directory of Open Access Journals (Sweden)

Rossie Wiedya Nusantara

2015-01-01

Full Text Available ABSTRAK Penelitian ini bertujuan untuk menganalisis alih fungsi lahan gambut yang menyebabkan perubahan emisi CO2 tanah pada hutan rawa gambut primer (HP, hutan gambut sekunder (HS, semak belukar (SB, kebun sawit (KS, dan kebun jagung (KJ dan menganalisis pengaruh suhu dan jeluk muka air tanah (water-table depth terhadap emisi CO2 tanah. Sampel dari tiap tipe lahan diambil sebanyak lima ulangan, total sampel 25. Saat pengukuran respirasi CO2 tanah gambut dilakukan pengukuran suhu tanah dan muka air tanah. Pengukuran di lapangan dilaksanakan dua kali yaitu awal musim kemarau dan musim hujan. Hasil penelitian menunjukkan bahwa emisi CO2 tanah tertinggi dan terendah pada dua waktu pengukuran tersebut adalah pada tipe lahan KJ (6,512 ton ha-1 th-1 dan SB (1,698  ton ha-1 th-1 serta pada tipe lahan KS (6,701 ton ha-1 th-1 dan SB (3,169 ton ha-1 th-1 berturut-turut. Suhu tanah gambut tertinggi dan terendah pada dua waktu pengukuran tersebut berturut-turut adalah pada tipe lahan SB (27,78 oC dan HP (22,78 oC, dan pada tipe lahan KS (29,08 oC dan HP (26,56 oC serta jeluk muka air tanah gambut berturut-turut pada tipe lahan KJ (56,2 cm dan  SB (32,1 cm. Faktor-faktor yang menyebabkan perubahan emisi CO2 tanah gambut adalah suhu tanah, jeluk muka air tanah dan pengelolaan lahan yang menyebabkan perubahan sifat tanah gambut, seperti ketersediaan C-organik (jumlah dan kualitas bahan organik, pH tanah dan kematangan gambut. ABSTRACT This study aims to analyze peatland use change that caused changes soil emissions of CO2 at primary peat swamp forest (HP, secondary peat forest (HS, shrub (SB, oil palm plantations (KS and corn field (KJ, and to analyze the influence of temperature and water-table depth to soil emission of CO2. Soil samples were taken from each five replications that accunt for 25 samples. Simultaneously with measurement of soil respiration measuremnts soil temperature. Field measurement is carried out twice at the beginning of dry season and

Produção de grãos e absorção de Cu, Fe, Mn e Zn pelo milho em solo adubado com lodo de esgoto, com e sem calcário Corn yield and uptake of Cu, Fe, Mn and Zn from sewage sludge-amended soil with and without liming

Directory of Open Access Journals (Sweden)

A. L. C. Martins

2003-06-01

Full Text Available O lodo de esgoto (LE, apesar do seu reconhecido valor como fertilizante, ainda é motivo de preocupação quando usado na agricultura, em virtude do potencial de absorção excessiva de metais pesados pelas plantas e entrada na cadeia alimentar. Para avaliar o efeito da adição de 0, 20, 40, 60 e 80 Mg ha-1 (com base no material seco de LE, aplicado de forma única ou parcelada em 2, 3 e 4 anos nas doses de 40, 60 e 80 Mg ha-1, respectivamente, com e sem calcário, na produção de grãos e massa seca da parte aérea e na absorção de Cu, Fe, Mn e Zn pelo milho, foi realizado, em Cordeirópolis (SP, um experimento em condições de campo, utilizando um Latossolo Vermelho distrófico típico, no período de 1983 a 1987. Foi utilizado o experimento em faixas ("split block" com quatro repetições. A maior dose de LE adicionou ao solo, em kg ha-1, 63, 3040, 25 e 152 de Cu, Fe, Mn e Zn, respectivamente. A produção de grãos e de massa seca da parte aérea aumentou linearmente com a adição de LE nos anos estudados. O LE aumentou significativamente as concentrações de Zn nas folhas e na parte aérea e provocou a redução nas concentrações de Fe e Mn, mas não alterou as de Cu. As concentrações dos metais nos grãos não foram influenciadas de forma significativa pela adição de LE, estando mesmo nas maiores doses, dentro dos níveis aceitáveis, sem causar restrição ao consumo humano. A absorção de Zn, Fe e Mn pelo milho foi significativamente reduzida pela adição de calcário. O Zn foi o metal que mais teve reduzida sua concentração na parte aérea pela adição de calcário. O parcelamento das doses de lodo de 40 a 80 Mg ha-1 provocou, de modo geral, aumento das quantidades absorvidas de metais pelo milho, sendo o Fe e o Zn os elementos que mais se acumularam na planta em resposta a esse parcelamento.Although the value of sewage sludge (SS as a fertilizer has long been recognized, it is still a matter of considerable concern

Reconstruction and Analysis for the DUNE 35-ton Liquid Argon Prototype

Energy Technology Data Exchange (ETDEWEB)

Wallbank, Michael James [Sheffield U.

2018-01-01

Neutrino physics is approaching the precision era, with current and future experiments aiming to perform highly accurate measurements of the parameters which govern the phenomenon of neutrino oscillations. The ultimate ambition with these results is to search for evidence of CP-violation in the lepton sector, currently hinted at in the world-leading analyses from present experiments, which may explain the dominance of matter over antimatter in the Universe. The Deep Underground Neutrino Experiment (DUNE) is a future long-baseline experiment based at Fermi National Accelerator Laboratory (FNAL), with a far detector at the Sanford Underground Research Facility (SURF) and a baseline of 1300 km. In order to make the required precision measurements, the far detector will consist of 40 kton liquid argon and an embedded time projection chamber. This promising technology is still in development and, since each detector module is around a factor 15 larger than any previous experiment employing this design, prototyping the detector and design choices is critical to the success of the experiment. The 35-ton experiment was constructed for this purpose and will be described in detail in this thesis. The outcomes of the 35-ton prototype are already influencing DUNE and, following the successes and lessons learned from the experiment, confidence can be taken forward to the next stage of the DUNE programme. The main oscillation signal at DUNE will be electron neutrino appearance from the muon neutrino beam. High-precision studies of these νe interactions requires advanced processing and event reconstruction techniques, particularly in the handling of showering particles such as electrons and photons. Novel methods developed for the purposes of shower reconstruction in liquid argon are presented with an aim to successfully develop a selection to use in a νe charged-current analysis, and a first-generation selection using the new techniques is presented.

Crystallization and electrical resistivity of Cu2O and CuO obtained by thermal oxidation of Cu thin films on SiO2/Si substrates

International Nuclear Information System (INIS)

De Los Santos Valladares, L.; Salinas, D. Hurtado; Dominguez, A. Bustamante; Najarro, D. Acosta; Khondaker, S.I.; Mitrelias, T.; Barnes, C.H.W.; Aguiar, J. Albino; Majima, Y.

2012-01-01

In this work, we study the crystallization and electrical resistivity of the formed oxides in a Cu/SiO 2 /Si thin film after thermal oxidation by ex-situ annealing at different temperatures up to 1000 °C. Upon increasing the annealing temperature, from the X ray diffractogram the phase evolution Cu → Cu + Cu 2 O → Cu 2 O → Cu 2 O + CuO → CuO was detected. Pure Cu 2 O films are obtained at 200 °C, whereas uniform CuO films without structural surface defects such as terraces, kinks, porosity or cracks are obtained in the temperature range 300–550 °C. In both oxides, crystallization improves with annealing temperature. A resistivity phase diagram, which is obtained from the current–voltage response, is presented here. The resistivity was expected to increase linearly as a function of the annealing temperature due to evolution of oxides. However, anomalous decreases are observed at different temperatures ranges, this may be related to the improvement of the crystallization and crystallite size when the temperature increases. - Highlights: ► The crystallization and electrical resistivity of oxides in a Cu films are studied. ► In annealing Cu films, the phase evolution Cu + Cu 2 O → Cu 2 O → Cu 2 O + CuO → CuO occurs. ► A resistivity phase diagram, obtained from the current–voltage response, is presented. ► Some decreases in the resistivity may be related to the crystallization.

166Ho-HA evaluation as therapeutic agent for rheumatoid arthritis treatment

International Nuclear Information System (INIS)

Chandia, M.C.; Errazu, X.C.; Pinto, L.N.; Godoy, N.O.; Avila, M.J.; Mendoza, P.; Mendoza, J.; Jofre, J.; Sirraalta, P.

2002-01-01

Aim: Rheumatoid arthritis is a limiting disease having, among its pathological features, the inflammation of synovial tissue with progressive and later destruction of the articulation. This leads to joint deformation and loss of its function, generating pain and reducing the mobility of the affected articulation. The aim was to evaluate 166 Ho-Hydroxyapatite ( 166 Ho-HA) as potential radiopharmaceutical for the symptomatic treatment of chronic and acute arthritis. Materials and Methods: Holmiun-166 was produced by irradiation of Ho 2 O 3 at La Reina Research Reactor, Nuclear Chilean Energy Commission. Hydroxyapatite was in-house synthesized. Its labelling and quality controls follows the internationally accepted procedures. An antigen's arthritis was induced to eight New Zealand rabbits with the 166 Ho-HA radiochemical being administered thereafter in two dosage modalities (single and double). The compound therapeutic efficiency was evaluated based upon clinical improvement and images from the inflamated articulation using 67 Ga citrate before and after 166 Ho-HA injection. Results: The radiochemical purity of the inoculated compound was greater than 98% as measured under sterility conditions. Clinically, an inflammation reduction (2 cm), appetite improvement and general well being was observed. The 166 Ho-HA distribution and localization was monitored using gamma camera images taken at 4 and 24 h. There was no evidence of extra articular leakage. From the 67 Ga citrate imaging, the acute group shows an overall improvement of well being corresponding to a lesser uptake at the inflamated articulation, regarding to the chronic group. The 166 Ho-HA double doses, compared to the single doses, suggest a reduced uptake of 67 Ga citrate at the inflamated tissue, meaning an increased therapeutic effect. Conclusions: 166 Ho-HA is useful as therapeutic agent for the symptomatic treatment of rheumatoid arthritis as shown by imaging and clinical examination

166 Ho-HA Evaluation as therapeutic agent for rheumatoid arthritis treatment

International Nuclear Information System (INIS)

Chandia, M; Errazu, X; Mendoza, P; Troncoso, F; Jofre, J; Sierralta, P

2003-01-01

Aim: Rheumatoid arthritis is a limiting disease having, among its pathological features, the inflammation of synovial tissue with progressive and later destruction of the articulation. This lead to joint deformation and loss of its function, generating pain and reducing the mobility of the affected articulation. The aim was to evaluate 166 Ho-Hydroxyapatite ( 166 Ho-HA) as potential radiopharmaceutical for the syntomatic treatment of chronic and acute arthritis Materials and Methods: 166 Holmiun was produced by irradiation of Ho 2 O 3 at La Reina Research Reactor, Nuclear Chilean Energy Commission. Hydroxyapatite was in-house synthetized. Its labelling and quality controls follows the internationally accepted procedures. An antigen arthritis was induced to eight New Zealand rabbits with the 166 Ho-HA radiochemical being administred thereafter in two dosage modalities (single and double). The compound therapeutic efficiency was evaluated based upon clinical improvement and images from the inflamated articulation using 67 Ga citrate before and after 166 Ho-HA injection. Results: The radiochemical purity of the innoculated compound was greater than 98% as measured under sterility conditions. Clinically, an inflamation reduction (2 cm), appetite improvement and general well being was observed. The 166 Ho-HA distribution and localization was monitored using gamma camera images taken at 4 and 24 h. There was no evidence of extraarticular leakage. From the 67 Ga citrate imaging, the acute group shows an overall improvement of well being corresponding to a lesser uptake at the inflamated articulation, regarding to the chronic group. The 166 Ho-HA double dosis, compared to the single dosis, suggest a reduced uptake of 67 Ga citrate at the inflamated tissue, meaning an increased therapeutic effect. Conclusions: 166 Ho-HA is usefull as therapeutic agent for the syntomatic treatment of rheumatoideal arthritis as shown by imaging and clinical examination (author)

Effects of plasma cleaning of the Cu seed layer surface on Cu electroplating

International Nuclear Information System (INIS)

O, Jun Hwan; Lee, Seong Wook; Kim, Jae Bum; Lee, Chong Mu

2001-01-01

Effects of plasma pretreatment to Cu seed/tantalum nitride (TaN)/ borophosphosilicate glass (BPSG) samples on copper (Cu) electroplating were investigated. Copper seed layers were deposited by magnetron sputtering onto tantalum nitride barrier layers before electroplating copper in the forward pulsed mode. The Cu seed layer was cleaned by plasma H 2 and N 2 prior to electroplating a copper film. Cu films electroplated on the copper seed layer with plasma pretreatment showed better electrical and physical properties such as electrical resistivities, surface morphologies, levels of impurities, adhesion and surface roughness than those without plasma pretreatment. It is shown that carbon and metal oxide contaminants at the sputtered Cu seed/TaN surface could be effectively removed by plasma H 2 cleaning. The degree of the (111) prefered orientation of the Cu film with plasma H 2 pretreatment is as high as pulse plated Cu film without plasma pretreatment. Also, plasma H 2 precleaning is more effective in enhancing the Cu electroplating properties onto the Cu seed layer than plasma N 2 precleaning

Approaching the limit of Cu(II)/Cu(I) mixed valency in a Cu(I)Br2-N-methylquinoxalinium hybrid compound.

Science.gov (United States)

Leblanc, Nicolas; Sproules, Stephen; Pasquier, Claude; Auban-Senzier, Pascale; Raffy, Helene; Powell, Annie K

2015-08-18

A novel 1D hybrid salt (MQ)[CuBr2]∞ (MQ = N-methylquinoxalinium) is reported. Structural, spectroscopic and magnetic investigations reveal a minimal Cu(II) doping of less than 0.1%. However it is not possible to distinguish Cu(I) and Cu(II). The unusually close packing of the organic moieties and the dark brown colour of the crystals suggest a defect electronic structure.

Nucleation and Growth of Cu-Al Intermetallics in Al-Modified Sn-Cu and Sn-Ag-Cu Lead-Free Solder Alloys

Science.gov (United States)

Reeve, Kathlene N.; Anderson, Iver E.; Handwerker, Carol A.

2015-03-01

Lead-free solder alloys Sn-Cu (SC) and Sn-Ag-Cu (SAC) are widely used by the microelectronics industry, but enhanced control of the microstructure is needed to improve solder performance. For such control, nucleation and stability of Cu-Al intermetallic compound (IMC) solidification catalysts were investigated by variation of the Cu (0.7-3.0 wt.%) and Al (0.0-0.4 wt.%) content of SC + Al and SAC + Al alloys, and of SAC + Al ball-grid array (BGA) solder joints. All of the Al-modified alloys produced Cu-Al IMC particles with different morphologies and phases (occasionally non-equilibrium phases). A trend of increasing Cu-Al IMC volume fraction with increasing Al content was established. Because of solidification of non-equilibrium phases in wire alloy structures, differential scanning calorimetry (DSC) experiments revealed delayed, non-equilibrium melting at high temperatures related to quenched-in Cu-Al phases; a final liquidus of 960-1200°C was recorded. During cooling from 1200°C, the DSC samples had the solidification behavior expected from thermodynamic equilibrium calculations. Solidification of the ternary alloys commenced with formation of ternary β and Cu-Al δ phases at 450-550°C; this was followed by β-Sn, and, finally, Cu6Sn5 and Cu-Al γ1. Because of the presence of the retained, high-temperature phases in the alloys, particle size and volume fraction of the room temperature Cu-Al IMC phases were observed to increase when the alloy casting temperature was reduced from 1200°C to 800°C, even though both temperatures are above the calculated liquidus temperature of the alloys. Preliminary electron backscatter diffraction results seemed to show Sn grain refinement in the SAC + Al BGA alloy.

Evaporación de Cu(In,GaSe2 en lámina delgada para aplicaciones fotovoltaicas

Directory of Open Access Journals (Sweden)

Guillén, C.

2004-04-01

Full Text Available The aim of this work is to study the structural and optical properties of Cu(In,GaSe2 (CIGS thin films after thermal and chemical treatments. Cu(In,GaSe2 thin films have been obtained by means of the selenization in vacuum or Ar of the metallic precursors evaporated sequentially. The sequence of evaporation was In/Ga/Cu/In. Single-phase chalcopyrite and polycrystalline CIGS films with (112 preferred orientation were obtained. An improvement in the crystallite feature and optical properties is observed after Ar selenization. Band gap energies, Eg, between 0.98 and 1.10 were obtained for different atomic ratios, being dominated by the Ga content. Thin films high absorption coefficient was reduced in band tails, specially when Cu content increases after chemical treatment in KCN.El objetivo de este trabajo es estudiar las propiedades estructurales y ópticas del Cu(In,GaSe2 (CIGS en lámina delgada tras diferentes tratamientos térmicos y químicos. El Cu(In,GaSe2 se ha obtenido mediante la selenización en vacío o Ar de los precursores metálicos evaporados secuencialmente. La secuencia de evaporación seguida fue In/Ga/Cu/In. Se obtuvieron láminas policristalinas de CIGS con estructura calcopirita fuertemente orientada en la dirección (112. Se observó una mejora de la naturaleza cristalina y de las propiedades ópticas tras la selenización en Ar. Se obtuvieron energías de banda prohibida, Eg, entre 0.98 y 1.10 eV para las diferentes relaciones atómicas, estando dominadas por el contenido de Ga. Se consiguió reducir la alta absorción por colas de banda de las láminas delgadas, especialmente cuando aumentaba el contenido de Cu, tras un tratamiento químico en KCN.

Mechanical, thermal, rheological and morphological behaviour of irradiated PP/HA composites

International Nuclear Information System (INIS)

Ramirez, C.; Albano, C.; Karam, A.; Dominguez, N.; Sanchez, Y.; Gonzalez, G.

2005-01-01

Hydroxyapatite (HA) reinforced polypropylene (PP) composites are being developed as bone graft materials. In this research, the effect of γ irradiation on mechanical, rheological, thermal and morphological behaviour of PP-HA composites was studied. The melt flow index of polymer increased markedly when it was exposed to radiation. This is indicative of chain scission reaction as the predominant process. During the tensile testing, the composites exhibited brittle behaviour, showing no fluency point. Elongation at break showed a tendency to decrease with the increase in radiation dose while stress at break did not show significant variation with radiation dose. High HA content (>20%) and radiation dose (25 kGy) had significant influence on thermal stability

High-temperature stability of Au/Pd/Cu and Au/Pd(P)/Cu surface finishes

Science.gov (United States)

Ho, C. E.; Hsieh, W. Z.; Lee, P. T.; Huang, Y. H.; Kuo, T. T.

2018-03-01

Thermal reliability of Au/Pd/Cu and Au/Pd(4-6 wt.% P)/Cu trilayers in the isothermal annealing at 180 °C were investigated by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and transmission electron microscopy (TEM). The pure Pd film possessed a nanocrystalline structure with numerous grain boundaries, thereby facilitating the interdiffusion between Au and Cu. Out-diffusion of Cu through Pd and Au grain boundaries yielded a significant amount of Cu oxides (CuO and Cu2O) over the Au surface and gave rise to void formation in the Cu film. By contrast, the Pd(P) film was amorphous and served as a good diffusion barrier against Cu diffusion. The results of this study indicated that amorphous Pd(P) possessed better oxidation resistance and thermal reliability than crystalline Pd.

Computer simulation of the structure of liquid metal halides RbBr, CuCl, CuBr, CuI, and AgBr

International Nuclear Information System (INIS)

Belashchenko, D.K.; Ostrovskij, O.I.

2003-01-01

The computerized models of the RbBr, AgBr, CuCl, CuBr and CuI liquid ion systems of 498 ions dimension are simulated at the temperatures of 753-960 K on the basis of the known diffraction data through the BELION algorithm. Good agreement of diffraction and model partial pair correlation functions (PPCF), excluding the PPCF first peaks heights, is obtained in all the cases. The simulation is carried out by the varied ion charges (the atomization energy values, close to the real ones, are obtained by ion charges ±1.00 for the RbBr, ±1.15 for AgBr, ±1.20 for CuCl, ±1.48 for CuBr and ±1.367 for CuI). The noncoulomb contributions in the interparticle potentials are calculated [ru

Species dependence of [64Cu]Cu-Bis(thiosemicarbazone) radiopharmaceutical binding to serum albumins

International Nuclear Information System (INIS)

Basken, Nathan E.; Mathias, Carla J.; Lipka, Alexander E.; Green, Mark A.

2008-01-01

Introduction: Interactions of three copper(II) bis(thiosemicarbazone) positron emission tomography radiopharmaceuticals with human serum albumin, and the serum albumins of four additional mammalian species, were evaluated. Methods: 64 Cu-labeled diacetyl bis(N 4 -methylthiosemicarbazonato)copper(II) (Cu-ATSM), pyruvaldehyde bis(N 4 -methylthiosemicarbazonato)copper(II) (Cu-PTSM) and ethylglyoxal bis(thiosemicarbazonato)copper(II) (Cu-ETS) were synthesized and their binding to human, canine, rat, baboon and porcine serum albumins quantified by ultrafiltration. Protein binding was also measured for each tracer in human, porcine, rat and mouse serum. Results: The interaction of these neutral, lipophilic copper chelates with serum albumin is highly compound- and species-dependent. Cu-PTSM and Cu-ATSM exhibit particularly high affinity for human serum albumin (HSA), while the albumin binding of Cu-ETS is relatively insensitive to species. At HSA concentrations of 40 mg/ml, '% free' (non-albumin-bound) levels of radiopharmaceutical were 4.0±0.1%, 5.3±0.2% and 38.6±0.8% for Cu-PTSM, Cu-ATSM and Cu-ETS, respectively. Conclusions: Species-dependent variations in radiopharmaceutical binding to serum albumin may need to be considered when using animal models to predict the distribution and kinetics of these compounds in humans

Cu and Cu2O films with semi-spherical particles grown by electrochemical deposition

International Nuclear Information System (INIS)

Zheng, Jin You; Jadhav, Abhijit P.; Song, Guang; Kim, Chang Woo; Kang, Young Soo

2012-01-01

Cu and Cu 2 O films can be prepared on indium-doped tin oxide glass substrates by simple electrodeposition in a solution containing 0.1 M Cu(NO 3 ) 2 and 3 M lactic acid at different pH values. At low pH (pH = 1.2), the uniform Cu films were obtained; when pH ≥ 7, the pure Cu 2 O films can be deposited. Especially, at pH = 11, the deposited Cu 2 O films exhibited cubic surface morphology exposing mainly {100} plane; in contrast, the films consisting of semi-spherical particles were obtained when the solution was being stirred for 2 weeks prior to use. The possible growth process and mechanism were comparatively discussed. - Highlights: ► Cu and Cu 2 O films were prepared by facile electrodeposition. ► Electrodeposition was preformed in electrolyte at different pH values. ► Dendritic Cu films were obtained at 1.2 pH with relatively high deposition potential. ► Semi-spherical Cu 2 O films were obtained with solution at 11 pH and stirred for 2 weeks. ► The possible growth mechanism of semi-spherical Cu 2 O films was discussed.

The activation energy for loop growth in Cu and Cu-Ni alloys

International Nuclear Information System (INIS)

Barlow, P.; Leffers, T.; Singh, B.N.

1978-08-01

The apparent activation energy for the growth of interstitial dislocation loops in copper, Cu-1%Ni, Cu-2%Ni, and Cu-5%Ni during high voltage electron microscope irradiation was determined. The apparent activation energy for loop growth in all these materials can be taken to be 0.34eV+-0.02eV. This value together with the corresponding value of 0.44eV+-0.02eV determined earlier for Cu-10%Ni is discussed with reference to the void growth rates observed in these materials. The apparent activation energy for loop growth in copper (and in Cu-1%Ni that has a void growth rate similar to that in pure copper) is interpreted as twice the vacancy migration energy (indicating that divacancies do not play any significant role). For the materials with higher Ni content (in which the void growth rate is much lower than that in Cu and Cu-1%Ni) the measured apparent activation energy is interpreted to be characteristic of loops positioned fairly close to the foil surface and not of loops in ''bulk material''. From the present results in combination with the earlier results for Cu-10%Ni it is concluded that interstitial trapping is the most likely explanation of the reduced void growth rate in Cu-Ni alloys. (author)

Enhancement of mucosal immune responses by chimeric influenza HA/SHIV virus-like particles

International Nuclear Information System (INIS)

Guo Lizheng; Lu Xiaoyan; Kang, S.-M.; Chen Changyi; Compans, Richard W.; Yao Qizhi

2003-01-01

To enhance mucosal immune responses using simian/human immunodeficiency virus-like particles (SHIV VLPs), we have produced novel phenotypically mixed chimeric influenza HA/SHIV VLPs and used them to immunize C57BL/6J mice intranasally. Antibody and cytotoxic T-cell (CTL) responses as well as cytokine production in both systemic and mucosal sites were compared after immunization with SHIV VLPs or chimeric HA/SHIV VLPs. By using enzyme-linked immunosorbent assay (ELISA), the levels of serum IgG and mucosal IgA to the HIV envelope protein (Env) were found to be highest in the group immunized with chimeric HA/SHIV VLPs. Furthermore, the highest titer of serum neutralizing antibody against HIV Env was found with the group immunized with chimeric HA/SHIV VLPs. Analysis of the IgG1/IgG2a ratio indicated that a T H 1-oriented immune response resulted from these VLP immunizations. HA/SHIV VLP-immunized mice also showed significantly higher CTL responses than those observed in SHIV VLP-immunized mice. Moreover, a MHC class I restricted T-cell activation ELISPOT assay showed a mixed type of T H 1/T H 2 cytokines in the HA/SHIV VLP-immunized mice, indicating that the chimeric VLPs can enhance both humoral and cellular immune responses to the HIV Env protein at multiple mucosal and systemic sites. The results indicate that incorporation of influenza HA into heterotypic VLPs may be highly effective for targeting vaccines to mucosal surfaces

3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity.

Science.gov (United States)

Poldervaart, Michelle T; Goversen, Birgit; de Ruijter, Mylene; Abbadessa, Anna; Melchels, Ferry P W; Öner, F Cumhur; Dhert, Wouter J A; Vermonden, Tina; Alblas, Jacqueline

2017-01-01

In bone regenerative medicine there is a need for suitable bone substitutes. Hydrogels have excellent biocompatible and biodegradable characteristics, but their visco-elastic properties limit their applicability, especially with respect to 3D bioprinting. In this study, we modified the naturally occurring extracellular matrix glycosaminoglycan hyaluronic acid (HA), in order to yield photo-crosslinkable hydrogels with increased mechanical stiffness and long-term stability, and with minimal decrease in cytocompatibility. Application of these tailor-made methacrylated hyaluronic acid (MeHA) gels for bone tissue engineering and 3D bioprinting was the subject of investigation. Visco-elastic properties of MeHA gels, measured by rheology and dynamic mechanical analysis, showed that irradiation of the hydrogels with UV light led to increased storage moduli and elastic moduli, indicating increasing gel rigidity. Subsequently, human bone marrow derived mesenchymal stromal cells (MSCs) were incorporated into MeHA hydrogels, and cell viability remained 64.4% after 21 days of culture. Osteogenic differentiation of MSCs occurred spontaneously in hydrogels with high concentrations of MeHA polymer, in absence of additional osteogenic stimuli. Addition of bone morphogenetic protein-2 (BMP-2) to the culture medium further increased osteogenic differentiation, as evidenced by increased matrix mineralisation. MeHA hydrogels demonstrated to be suitable for 3D bioprinting, and were printed into porous and anatomically shaped scaffolds. Taken together, photosensitive MeHA-based hydrogels fulfilled our criteria for cellular bioprinted bone constructs within a narrow window of concentration.

3D bioprinting of methacrylated hyaluronic acid (MeHA hydrogel with intrinsic osteogenicity.

Directory of Open Access Journals (Sweden)

Michelle T Poldervaart

Full Text Available In bone regenerative medicine there is a need for suitable bone substitutes. Hydrogels have excellent biocompatible and biodegradable characteristics, but their visco-elastic properties limit their applicability, especially with respect to 3D bioprinting. In this study, we modified the naturally occurring extracellular matrix glycosaminoglycan hyaluronic acid (HA, in order to yield photo-crosslinkable hydrogels with increased mechanical stiffness and long-term stability, and with minimal decrease in cytocompatibility. Application of these tailor-made methacrylated hyaluronic acid (MeHA gels for bone tissue engineering and 3D bioprinting was the subject of investigation. Visco-elastic properties of MeHA gels, measured by rheology and dynamic mechanical analysis, showed that irradiation of the hydrogels with UV light led to increased storage moduli and elastic moduli, indicating increasing gel rigidity. Subsequently, human bone marrow derived mesenchymal stromal cells (MSCs were incorporated into MeHA hydrogels, and cell viability remained 64.4% after 21 days of culture. Osteogenic differentiation of MSCs occurred spontaneously in hydrogels with high concentrations of MeHA polymer, in absence of additional osteogenic stimuli. Addition of bone morphogenetic protein-2 (BMP-2 to the culture medium further increased osteogenic differentiation, as evidenced by increased matrix mineralisation. MeHA hydrogels demonstrated to be suitable for 3D bioprinting, and were printed into porous and anatomically shaped scaffolds. Taken together, photosensitive MeHA-based hydrogels fulfilled our criteria for cellular bioprinted bone constructs within a narrow window of concentration.

A Modified ELISA Accurately Measures Secretion of High Molecular Weight Hyaluronan (HA) by Graves' Disease Orbital Cells

Science.gov (United States)

Krieger, Christine C.

2014-01-01

Excess production of hyaluronan (hyaluronic acid [HA]) in the retro-orbital space is a major component of Graves' ophthalmopathy, and regulation of HA production by orbital cells is a major research area. In most previous studies, HA was measured by ELISAs that used HA-binding proteins for detection and rooster comb HA as standards. We show that the binding efficiency of HA-binding protein in the ELISA is a function of HA polymer size. Using gel electrophoresis, we show that HA secreted from orbital cells is primarily comprised of polymers more than 500 000. We modified a commercially available ELISA by using 1 million molecular weight HA as standard to accurately measure HA of this size. We demonstrated that IL-1β-stimulated HA secretion is at least 2-fold greater than previously reported, and activation of the TSH receptor by an activating antibody M22 from a patient with Graves' disease led to more than 3-fold increase in HA production in both fibroblasts/preadipocytes and adipocytes. These effects were not consistently detected with the commercial ELISA using rooster comb HA as standard and suggest that fibroblasts/preadipocytes may play a more prominent role in HA remodeling in Graves' ophthalmopathy than previously appreciated. PMID:24302624

Kajian Sifat Kimia Tanah, Pertumbuhan dan Produksi Padi (Oryiza sativa L.) Pada Tanah Sulfat Masam Potensial Akibat Pemberian Kompos Tandan Kosong Kelapa Sawit dan Pupuk SP-36

OpenAIRE

Tambunan, Sri Wahyuni

2013-01-01

This research aims to compost give effect empty palm bunch studies and fertilizer SP-36 to improve chemistry characteristic, growing and rice production (Oryza sativa L.) in acidic sulfate soil. This research was conducted in greenhouse agricultural departments, universities northern Sumatra, Medan. This study used a randomized block design (RAK) factorial, with 2 factors: factor 1: compost TKS treatment factor (B) are : B0 = 0 ton ha-1 (0 g TKS/pot) ; B1 = 10 ton ha-1 (40 g TKS/pot); B2 = 20...

Giant Cu 2p Resonances in CuO Valence-Band Photoemission

NARCIS (Netherlands)

Tjeng, L.H.; Chen, C.T.; Ghijsen, J.; Rudolf, P.; Sette, F.

1991-01-01

We report the observation of a giant resonance in the Cu 2p resonant-photoemission spectra of CuO. The study allows the unambiguous identification of the local Cu 3d8 configuration in the valence-band photoemission spectrum, providing conclusive evidence for the charge-transfer nature of the

Inhibitory effect of PTD-OD-HA fusion protein on Bcr-Abl in K562 cells

Directory of Open Access Journals (Sweden)

Miao GAO

2012-10-01

Full Text Available Objective　To study the transduction dynamics, location of PTD-OD-HA fusion protein and its interaction with Bcr-Abl oncoprotein in K562 cell lines, and explore the influence of PTD-OD-HA fusion protein on oligomerization and tyrosine kinase activity of Bcr-Abl. Methods　PTD-OD-HA fusion protein was labeled with FITC and co-cultured with K562 cells. The transduction efficiency of labeled PTD-OD-HA at different doses and time intervals was observed under fluorescence microscope. The location of labeled PTD-OD-HA fusion protein in K562 cells was detected by confocal microscopy. The interaction of PTD-OD-HA fusion protein with Bcr-Abl oncoprotein was confirmed by coimmunoprecipitation. The phosphorylation of Bcr-Abl oncoprotein was detected by Western blotting. Results　PTD-OD-HA fusion protein labeled with FITC was transduced into K562 cells in a dose- and time-dependent manner. PTD-OD-HA fusion protein was located in the cytoplasm of K562 cells and was consistent with the location of Bcr-Abl oncoprotein. The interaction of PTD-OD-HA fusion protein with Bcr-Abl oncoprotein was proved in K562 cells. This interaction could interrupt the homologous oligomerization of Bcr-Abl oncoprotein and reduce the phosphorylation of Bcr-Abl oncoprotein. Conclusion　PTD-OD-HA fusion protein could be transduced into K562 cells efficiently, inhibit the oligomerization and reduce the phosphorylation of Bcr-Abl oncoprotein.

Diffusion of Cu+ in β-phase CuI

International Nuclear Information System (INIS)

Johansson, J.X.M.Z.; Skoeld, K.; Joergensen, J.E.

1992-01-01

Measurements of ionic diffusion of Cu + in solid CuI in the β-phase is carried out with a non-destructive radioactive tracer technique, utilizing coincidence counting of the annihilation gammas from the positron decay of 64 Cu. The diffusion coefficient and the activation energy for the diffusion are evaluated. The experimental results show distinct diffusion character in the β-phase which differs from those in the γ- and α-phases. The β-phase diffusion properties together with the previous results for γ-and α-phases will provide valuable guidance for MD calculations, in which the diffusion coefficients and activation energies have been overestimated and the γ-β phase transition does not appear. The ionic conductivity of CuI estimated from tracer diffusion results and the Nernst-Einstein relation are compared with values from electro-chemical methods. In all three phases the conductivities obtained from electro-chemical methods are much lower than those calculated from the measured tracer diffusion coefficients. (author). 7 refs.; 4 figs.; 2 tabs

Ahmet Haşim’de Ev-Yuva ve Doğa İmgesi Home-Nest and Nature Images in Ahmet Haşim

Directory of Open Access Journals (Sweden)

Refika ALTIKULAÇ DEMİRDAĞ

2012-12-01

Full Text Available Home and Nest images are commonly used images in poetry. Home is a shelter within the poet feels himself safe and secure. Image of nature in Ahmet Hasim’s poems, has been the most focused subjects on. Furthermore, assessments have been made on the poet's pessimism and desire that escape to an imaginary world from the real world. But, It hasn’t been dwelled enough on subject why Haşim escape from the real world to an imaginary world. Because, imaginary world that was created in Haşim’s poems, is richer than the real world. It is alsa a remarkable issue, the need of Haşim for a home and a nest or a shelter in nature. Haşim is more peaceful in a narrower space, inside the home. We can see this situation in poet’s poem called "Evim". Furthermore Hashim described a larger shelter in his poem called "O Belde”. “O Belde” is a part of nature and a nook in nature. Therefore, just like abird's nest, it has been made with the poet's feelings, his heart. Actuallyit is not important to be real or not for poet. Because in fact the poetknows the place that described, is mind’s shelter. It is the poet’s mindand dream, who wants to escape from the real world. His mind wants toescape from the real world, Because the real world is a place that ispessimistic and unsafe. There is plenty of "movement" and plenty oflight. This plenty of movement and light has scared the poet. He canfind the world that is less bright, more silent, more and more intimatewith nature, in his "untouched" regions of his mind. This is the placethat he found is home-nest, “O Belde”. Ev ve yuva imgeleri şiirde çok kullanılan imgelerdendir. Şairin kendini güvende hissettiği bir sığınaktır ev. Ahmet Haşim’in şiirlerinde doğa imgesi üzerinde en fazla durulan konulardan olmuştur. Ayrıca şairin karamsarlığı ve gerçek dünyadan hayali dünyaya kaçma isteği üzerinde de değerlendirmeler yapılmıştır. Fakat Haşim’in neden gerçek d

Soil solution dynamics of Cu and Zn in a Cu- and Zn-polluted soil as influenced by gamma-irradiation and Cu-Zn interaction.

Science.gov (United States)

Luo, Y M; Yan, W D; Christie, P

2001-01-01

A pot experiment was conducted to study soil solution dynamics of Cu and Zn in a Cu/Zn-polluted soil as influenced by gamma-irradiation and Cu-Zn interaction. A slightly acid sandy loam was amended with Cu and Zn (as nitrates) either singly or in combination (100 mg Cu and 150 mg Zn kg(-1) soil) and was then gamma-irradiated (10 kGy). Unamended and unirradiated controls were included, and spring barley (Hordeum vulgare L. cv. Forrester) was grown for 50 days. Soil solution samples obtained using soil moisture samplers immediately before transplantation and every ten days thereafter were used directly for determination of Cu, Zn, pH and absorbance at 360 nm (A360). Cu and Zn concentrations in the solution of metal-polluted soil changed with time and were affected by gamma-irradiation and metal interaction. gamma-Irradiation raised soil solution Cu substantially but generally decreased soil solution Zn. These trends were consistent with increased dissolved organic matter (A360) and solution pH after gamma-irradiation. Combined addition of Cu and Zn usually gave higher soil solution concentrations of Cu or Zn compared with single addition of Cu or Zn in gamma-irradiated and non-irradiated soils, indicating an interaction between Cu and Zn. Cu would have been organically complexed and consequently maintained a relatively high concentration in the soil solution under higher pH conditions. Zn tends to occur mainly as free ion forms in the soil solution and is therefore sensitive to changes in pH. The extent to which gamma-irradiation and metal interaction affected solubility and bioavailability of Cu and Zn was a function of time during plant growth. Studies on soil solution metal dynamics provide very useful information for understanding metal mobility and bioavailability.

Influence of surface topography on RBS measurements: case studies of (Cu/Fe/Pd) multilayers and FePdCu alloys nanopatterned by self-assembly

Science.gov (United States)

Krupinski, M.; Perzanowski, M.; Zabila, Y.; Zarzycki, A.; Marszałek, M.

2017-03-01

In this paper the influence of surface topography on Rutherford backscattering spectrometry (RBS) is discussed. (Cu/Fe/Pd) multilayers with total thickness of about 10 nm were deposited by physical vapor deposition on self-organized array of SiO2 nanoparticles with the size of 50 nm and 100 nm. As a reference, the multilayered systems were also prepared on flat substrates under the same conditions. After the deposition, morphology of the systems was studied by scanning electron microscopy (SEM), while chemical analysis was performed using Rutherford backscattering spectrometry. It was found that the RBS spectra and determined compositions for flat and patterned multilayers differ. The difference is discussed by taking into account the effect of additional inelastic scattering and energy straggling occurring due to developed topography of patterned systems. Then, the multilayers were annealed in 600 °C in order to obtain FePdCu alloy. The phenomenon of solid-state dewetting resulted in the formation of isolated alloy islands on the top of SiO2 nanoparticles. The SEM and RBS analysis were repeated showing correlation between the size distribution of obtained alloy islands and broadening of peaks appearing in RBS spectra. Invited talk at 8th International Workshop on Advanced Materials Science and Nanotechnology (IWAMSN2016), 8-12 November 2016, Ha Long City, Vietnam.

Spin dynamics in CuO and Cu[sub 1[minus][ital x

Energy Technology Data Exchange (ETDEWEB)

Carretta, P.; Corti, M.; Rigamonti, A. (Department of Physics Alessandro Volta,' ' University of Pavia, Via Bassi 6, 27100 Pavia (Italy))

1993-08-01

[sup 63]Cu nuclear quadrupole resonance (NQR), nuclear antiferromagnetic resonance (AFNMR), and spin-lattice relaxation, as well as [sup 7]Li NMR and relaxation measurements in CuO and in Cu[sub 1[minus][ital x

Novel CuCr_2O_4 embedded CuO nanocomposites for efficient photodegradation of organic dyes

International Nuclear Information System (INIS)

Mageshwari, K.; Sathyamoorthy, R.; Lee, Jeong Yong; Park, Jinsub

2015-01-01

Graphical abstract: - Highlights: • Novel CuO–CuCr_2O_4 nanocomposites synthesized by reflux condensation method. • Methyl orange and methylene blue dye degradation studied under UV light irradiation. • Nanocomposites characterized by XRD, FESEM, TEM, EDX, UV–vis DRS and PL. • CuCr_2O_4 loading effectively enhanced the catalytic activity of CuO. - Abstract: Novel photocatalyst based on CuO–CuCr_2O_4 nanocomposites was synthesized for different Cr"3"+ concentration by reflux condensation method, and their photocatalytic activity was evaluated by monitoring the photodegradation of methyl orange (MO) and methylene blue dyes (MB) under UV light irradiation. Phase evolution by X-ray diffraction showed monoclinic CuO and tetragonal CuCr_2O_4 as the components of the prepared nanocomposites. Morphological analysis by scanning electron microscope and transmission electron microscope revealed that the incorporation of Cr"3"+ in CuO lattice alters the morphology of CuO from microsphere to cluster shape. Photoluminescence spectra of CuO–CuCr_2O_4 nanocomposites exhibited reduced PL emissions compared to pure CuO, indicating the low recombination rate of photogenerated electrons and holes. As expected, the CuCr_2O_4 loaded CuO showed enhanced photocatalytic activity for MO and MB dyes, and the kinetic studies suggest that the degradation follows pseudo-first-order kinetics. The enhanced photocatalytic activity of CuO–CuCr_2O_4 nanocomposites can be attributed to the presence of CuCr_2O_4 as an electron acceptor, which improves the effective charge separation in CuO.

Fabrication of Cu-riched W–Cu composites by combustion synthesis and melt-infiltration in ultrahigh-gravity field

Energy Technology Data Exchange (ETDEWEB)

Zhao, Pei [Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100039 (China); Guo, Shibin; Liu, Guanghua; Chen, Yixiang [Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); Li, Jiangtao, E-mail: ljt0012@vip.sina.com [Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)

2013-10-15

Unadulterated Cu-riched W–Cu composites of W27–Cu73, W34–Cu66, W40–Cu60, W49–Cu51 and W56–Cu44 have been prepared by a novel method called combustion synthesis and melt-infiltration in ultrahigh-gravity field, of which W27–Cu73 and W34–Cu66 showed good ductility and W40–Cu60, W49–Cu51 and W56–Cu44 were brittle. In this technique, Cu melt accompanied with a great amount of heat was produced by thermit reaction and infiltrated into W–Cu powder bed. When the powder bed was Cu-riched powder bed such as W50–Cu50 or W60–Cu40, Cu melt would go through the powder bed, reach the bottom of the graphite crucible and then form a heat dissipation channel. Thus the cooling rate was so fast that the product was mixed up with impurity. The problem can be solved by putting some W powders under W50–Cu50 or W60–Cu40 powder bed to prevent the formation of heat dissipation channel.

Properties of the CuGaSe2 and CuInSe2 (001) surface

International Nuclear Information System (INIS)

Deniozou, T.

2005-01-01

The main task of this work was to investigate the (001) CuGaSe 2 and CuInSe 2 surface in dependence of preparation and stoichiometry. The knowledge of the atomic structure as well as other surface properties is important in respect to optimization of novel thin film solar cells. For the characterization of the layers mainly Auger electron Spectroscopy, low-energy electron diffraction and photoelectron spectroscopy were implemented. The development of an appropriate procedure with Ar + sputtering and annealing combined with decapping enabled the preparation of clean and well-ordered surfaces. Different surface structures were observed in dependence of the layer preparation and composition. A (4 x 1) reconstruction was observed for the first time on CuGaSe 2 layers grown with a moderate Cu-excess after preparation by sputtering and annealing. Similarly a (4 x 2) reconstruction was detected on CuInSe2 surfaces of Cu-poor layers. A reconstruction could be also observed on Cu-poorer layers, however the facets/steps could not be completely removed. Cu-richer layers were facet-free, however the observed reconstruction was also weaker. Thus it was shown that in contrary to recent expectations, according to which only the (112) surface is stable, also the (001) can be stable under particular conditions. The appearance of facets or steps is correlated with the presence of CuIn 3 Se 5 or CuGa 3 Se 5 phases. This information is furthermore important for the understanding of grain boundaries in polycrystalline CuGaSe 2 and CuInSe 2 . Binding energy shifts were observed for the first time on all Se3d, In4d, Ga3d, Cu3d core levels of the reconstructed surfaces. By comparison with results from the literature from the similar ZnSe (100) surface a modell for the (4 x 2) reconstruction was proposed. The surface components in the Se3d, In4d and Cu3d emission were attributed to Se dimers or In and Cu adatoms respectively. The x 1 periodicity of the (4 x 1) reconstruction of CuGaSe 2 is

Facile synthesis of dendritic Cu by electroless reaction of Cu-Al alloys in multiphase solution

Energy Technology Data Exchange (ETDEWEB)

Wang, Ying; Liang, Shuhua, E-mail: liangxaut@gmail.com; Yang, Qing; Wang, Xianhui

2016-11-30

Highlights: • Nano- or micro-scale fractal dendritic copper (FDC) was synthesized by electroless immersing of Cu-Al alloys in CuCl{sub 2} + HCl. • FDC size increases with the increase of Al content in Cu-Al alloys immersed in CuCl{sub 2} + HCl solution. • Nanoscale Cu{sub 2}O was found at the edge of FDC. Nanoporous copper (NPC) can also be obtained by using Cu{sub 17}Al{sub 83} alloy. • The potential difference between CuAl{sub 2} and α-Al phase and the replacement reaction in multiphase solution are key factors. - Abstract: Two-dimensional nano- or micro-scale fractal dendritic coppers (FDCs) were synthesized by electroless immersing of Cu-Al alloys in hydrochloric acid solution containing copper chloride without any assistance of template or surfactant. The FDC size increases with the increase of Al content in Cu-Al alloys immersed in CuCl{sub 2} + HCl solution. Compared to Cu{sub 40}Al{sub 60} and Cu{sub 45}Al{sub 55} alloys, the FDC shows hierarchical distribution and homogeneous structures using Cu{sub 17}Al{sub 83} alloy as the starting alloy. The growth direction of the FDC is <110>, and all angles between the trunks and branches are 60°. Nanoscale Cu{sub 2}O was found at the edge of FDC. Interestingly, nanoporous copper (NPC) can also be obtained through Cu{sub 17}Al{sub 83} alloy. Studies showed that the formation of FDC depended on two key factors: the potential difference between CuAl{sub 2} intermetallic and α-Al phase of dual-phase Cu-Al alloys; a replacement reaction that usually occurs in multiphase solution. The electrochemical experiment further proved that the multi-branch dendritic structure is very beneficial to the proton transfer in the process of catalyzing methanol.

Experimental study on bone tissue reaction around HA implants radiated after implantation

International Nuclear Information System (INIS)

Kudo, Masato; Matsui, Yoshiro; Tamura, Sayaka; Chen, Xuan; Uchida, Haruo; Mori, Kimie; Ohno, Kohsuke; Michi, Ken-ichi

1998-01-01

This study was conducted to investigate histologically and histomorphometrically the tissue reaction around hydroxylapatite (HA) implants that underwent irradiation in 3 different periods in the course of bone healing after implantation. The cylindrical high-density HA implants were implanted in 48 Japanese white rabbit mandibles. A single 15 Gy dose was applied to the mandible 5, 14, or 28 days after implantation. The rabbits were sacrificed 7, 14, 28, and 90 days after irradiation. Nonirradiated rabbits were used as controls. CMR, labeling with tetracycline and calcein, and non-decalcified specimens stained with toluidine blue were used for histological analyses and histomorphometric measurements. The results were as follows: In the rabbits irradiated 5 days after implantation, the HA-bone contact was observed later than that in the controls and the bone-implant contact surface ratio was lower than that in the controls at examination because necrosis of the newly-formed bone occurred just after irradiation. HA-bone contact of the rabbits irradiated 14 and 28 days after implantation was similar to that of the controls. And, bone remodeling was suppressed in rabbits of each group sacrificed at 90 days after irradiation. The results suggested that a short interval between implantation and irradiation causes direct contact between HA implant and bone and a long lapse of time before irradiation hardly affects the bone-implant contact, but delays bone remodeling. Therefore, it is necessary to prevent overloading the HA implants irradiated after implantation and pay utmost attention to conditions around the bone-implant contact. (author)

New therapeutic agent for radiation synovectomy - preparation of {sup 166}Ho-EDTMP-HA particle

Energy Technology Data Exchange (ETDEWEB)

Bai, H.; Jin, X.; Du, J.; Wang, F.; Chen, D.; Fan, H.; Cheng, Z.; Zhang, J. [China Institute of Atomic Energy, Beijing (Switzerland). Isotope Department

1997-10-01

In order to prepare new therapeutical agent for radiation synovectomy, Hydroxyapatite (HA) was labelled with {sup 166}Ho by EDTMP that had high affinity to HA particles. Radiolabelling of HA particles was divided into two steps, {sup 166}Ho-EDTMP was prepared first; then mixed with HA particles completely and vibrated for 15 minutes on the micromixer at room temperature, washed 3 times with deionized water. Radiolabelling particle was separated from free {sup 166}Ho via centrifugation to determine its radiolabelling efficiency. {sup 166}Ho-EDTMP-HA and {sup 166}Ho-EDTMP were injected into knee joint of normal rabbits respectively, every group was killed at different time postinjection, took out major organ and collected urine and blood, then weighted and determined their radio counts. HA particles, as a natural component of bone was known to have good compatibility with soft tissue and biodegrade into calcium and phosphate in vivo. It was readily prepared from common chemical and formed into particles of desired size range in a controlled process, it had high stability in vitro and vivo. Radiolabelling of HA particle with {sup 166}Ho by EDTMP was simple to perform and provides an excellent labelling yield that was more than 95% under the optimal labelling condition. The optimal labelling condition at room temperature was pH 6.0-8.0 and vibration time 15 minutes. The absorbed capacity of HA particle was 5 mg Ho/g HA particle and size of radiolabelling particle was at range of 2-5,{mu}m that is suitable for therapy of radiation synovectomy. {sup 166}Ho-EDTMP-HA particle demonstrated high in vitro stability in either normal saline or 1% BSA solution, but instability under extremely acidic condition (pH 1-2). The control studies performed with {sup 166}Ho-EDTMP not bound to HA particle provided information on the distribution of radioactivity that would occur upon leakage of the radiochemical compound from joint. Its short half-life, its extremely low leakage from the

Feeding preference of Diabrotica speciosa (Ger. (Coleoptera: Chrysomelidae by broccoli leaves from natural, organic and conventional farming systems/ Preferência alimentar de Diabrotica speciosa (Ger. (Coleoptera: Chrysomelidae por folhas de brócolos cultivado em sistema natural, orgânico e convencional

Directory of Open Access Journals (Sweden)

Pedro Manuel O. J. Neves

2006-06-01

Full Text Available Multiple-choice laboratory tests were achieved to compare feeding preference of Diabrotica speciosa (Ger. to leaves of broccoli (Brassica oleraceae L. var. italica from natural, conventional and organic farming systems. Natural farming systems included incorporation of the elephant grass Pennisetum purpureum Schumacher cv. Napier (50 ton/ha, Bokashi compost (1.5 ton/ha and spray of EM 4 (Natural 1, or the incorporation of the Bokashi compost (1.5 ton /ha and spray of EM 4 (Natural 2, and in the conventional, NPK + borax were incorporated in the planting + dressing N and organic compost (1 kg/ plant was incorporated in the organic system. Organic compost was prepared using crop residues of corn (Zea mays L., soybean [Glycine max (L. Mer.], and cattle manure. Leaf discs were collected and placed in cages in multiple-choice tests. Beetles preferred mostly broccoli leaves from conventional farming system than leaves from Natural (1 and 2 and Organic farming systems. Feeding on leaves from Natural 1, Natural 2 and Organic farming system were 68, 67 and 57% of the feeding on leaves from Conventional farming system.Testes de múltipla escola foram realizados para comparar a preferência alimentar de Diabrotica speciosa (Ger. por folhas de brócolos (Brassica oleraceae L. var. italica cultivado em sistema natural, convencional e orgânico. No sistema natural de cultivo houve a incorporação de capim elefante Pennisetum purpureum Schumacher cv. Napier (50 ton/ha, composto Bokashi (1,5 ton/ha e pulverização de EM 4 (Natural 1, ou a incorporação do composto Bokashi (1,5 ton/ha e pulverização do EM 4 (Natural 2, no sistema convencional houve a incorporação do NPK + borax + N em cobertura, e no sistema orgânico incorporouse composto orgânico (1 kg/planta. O composto orgânico foi preparado utilizando-se resíduos de milho (Zea mays L. e soja [Glycine max (L. Mer.] e esterco de gado. Folhas foram retiradas das plantas das quais foram separados

Copper phytoextraction in tandem with oilseed production using commercial cultivars and mutant lines of sunflower.

Science.gov (United States)

Kolbas, A; Mench, M; Herzig, R; Nehnevajova, E; Bes, C M

2011-01-01

Use of sunflower (Helianthus annuus L.) for Cu phytoextraction and oilseed production on Cu-contaminated topsoils was investigated in afield trial at a former wood preservation site. Six commercial cultivars and two mutant lines were cultivated in plots with and without the addition of compost (5% w/w) and dolomitic limestone (0.2% w/w). Total soil Cu ranged from 163 to 1170 mg kg(-1). In soil solutions, Cu concentration varied between 0.16-0.93 mg L(-1). The amendment increased soil pH, reduced Cu exposure and promoted sunflower growth. Stem length, shoot and capitulum biomasses, seed yield, and shoot and leaf Cu concentrations were measured. At low total soil Cu, shoot Cu mineralomass was higher in commercial cultivars, Le., Salut, Energic, and Countri, whereas competition and shading affected morphological traits of mutants. Based on shoot yield (7 Mg DW ha(-1)) and Cu concentration, the highest removal was 59 g Cu ha(-1). At high total soil Cu, shoot Cu mineralomass peaked for mutants (e.g., 52 g Cu ha(-1) for Mutant 1 line) and cultivars Energic and Countri. Energic seed yield (3.9 Mg air-DW ha(-1)) would be sufficient to produce oil Phenotype traits and shoot Cu removal depended on sunflower types and Cu exposure.

Separations on a cellulose exchanger with salicylic acid as functional group. [Fe/sup 3//sup+//Cu/sup 2//sup+/, Cu/sup 2//sup+//Ni/sup 2//sup+//, and Cu/sup 2//sup+//Cu complex separations

Energy Technology Data Exchange (ETDEWEB)

Burba, P; Lieser, K H [Technische Hochschule Darmstadt (F.R. Germany). Fachbereich Anorganische Chemie und Kernchemie

1976-07-01

The use of a cellulose compound containing salicylic acid as functional group (capacity 0.6 mequ./g) for different problems is described. The seperations Fe/sup 3 +//Cu/sup 2 +/ and Cu/sup 2 +//Ni/sup 2 +/ in aqueous solutions are achieved smoothly at pH 2 and 2.5 resp. In organic solvents (pyridine) copper ions are separated from copper complexes as shown by the examples Cu/sup 2 +//(Cu(mnt)/sub 2/)/sup 2 -/ (mnt = maleonitril-1,2-dithiolate) and Cu/sup 2 +//dibenzo(b.i.)(5.9.14.18)tetraazacyclotetradecene-copper (Cu(chel)). The complex (Cu(mnt)/sub 2/)/sup 2 -/ can be labelled with Cu-64 on a separation column, whereas (Cu-(chel)) is substition inert.

Sintering behavior and property of bioglass modified HA-Al2O3 composite

Directory of Open Access Journals (Sweden)

Wang Li-li

2012-01-01

Full Text Available The bioglass modified HA-Al2O3 composites were successfully fabricated by mixing HA, synthesized by wet chemical method between precursor materials H3PO4 and Ca(OH2, with 25wt% Al2O3 and different content of bioglass (5%, 25%, 45%, 65wt% respectively, with a mole fraction of 53.9%SiO2, 22.6%Na2O, 21.8%CaO, and 1.7wt%P2O5, sintered in air at various temperatures (750-950°C for 2h. when the content of bioglass is below 45wt% in the composite, HA decomposes completely and transforms to β-TCP. The main phase in this case are β-TCP, Al2O3 and Ca3(AlO32.When the content of bioglass is above 45wt% in the composite, the decomposition of HA to β-TCP is suppressed and the main phases in this case are Al2O3 and HA, DCP□CaHPO4□ and β-TCP, which almost have the same chemical composition, forming ternary-glass phase, and have better bioactive than pure HA. It can also be found that at the certain addition of bioglass, the higher sintered temperature, the bigger volume density and flexural strength of the composite are, but when the sintered temperature reaches 950°C, they decrease. This modified HA-Al2O3 composites by calcium silicate glass have a much lower sintering temperature and decrease the production cost much.

Articulated vehicles of 25 meter and 60 ton in The Netherlands: the start of a pilot project

NARCIS (Netherlands)

Hoogvelt, R.B.J.; Huijbers, J.J.W.

1998-01-01

At this moment the total allowable length of an articulated vehicle in The Netherlands is 18.35 meter and its total weight is 50 ton. Several Dutch transportation organisations requested a pilot project with longer and heavier vehicles for heavy goods transpotation. Because of the environmental

HaVec: An Efficient de Bruijn Graph Construction Algorithm for Genome Assembly

Directory of Open Access Journals (Sweden)

Md Mahfuzer Rahman

2017-01-01

Full Text Available Background. The rapid advancement of sequencing technologies has made it possible to regularly produce millions of high-quality reads from the DNA samples in the sequencing laboratories. To this end, the de Bruijn graph is a popular data structure in the genome assembly literature for efficient representation and processing of data. Due to the number of nodes in a de Bruijn graph, the main barrier here is the memory and runtime. Therefore, this area has received significant attention in contemporary literature. Results. In this paper, we present an approach called HaVec that attempts to achieve a balance between the memory consumption and the running time. HaVec uses a hash table along with an auxiliary vector data structure to store the de Bruijn graph thereby improving the total memory usage and the running time. A critical and noteworthy feature of HaVec is that it exhibits no false positive error. Conclusions. In general, the graph construction procedure takes the major share of the time involved in an assembly process. HaVec can be seen as a significant advancement in this aspect. We anticipate that HaVec will be extremely useful in the de Bruijn graph-based genome assembly.

Application of Bioameliorant and Biofertilizers to Increase the Soil Health and Rice Productivity

Directory of Open Access Journals (Sweden)

Tualar Simarmata

2016-10-01

Full Text Available The major rice intensity of diseases in Indonesia was increased significantly and has caused a yield loss of up to 20–30%. The experiments had been conducted to investigate the effect of bioameliorant or composted straw (CS combined with consortia of biofertilizers (CB and biocontrol agent to restore the soil health and promote the induced systemic resistance (ISR for increasing the rice productivity. The experiment arranged as randomized block design consisted of 12 treatments (0, 2.5, 5.0 and 7.5 ton of CS per ha combined with 400 g of CB and 200 g inoculant of CB + 200 g inoculant of Trichoderma sp and was provided with three replications. The experimental results revealed that application of 2.5–7.5 ton per ha of bioameliorant combined with 400 g per ha of CB and 400 g Trichoderma sp has increased the ISR and enhanced the rice productivity significantly. The brown spot, sheath rice blight and bacterial leaf blight diseases were reduced from 16.7% to 3.3–8.0%, 20% to 4–10%, 24% to 2.7–4.7% and 20.7% to 8–14.0%, respectively at 7 weeks after transplanting. In addition, the rice grain yield was increased from about 7.1 ton ha−1 to 7.9–10.1 ton per ha.

Laser Photolytic Approach to Cu/polymer Sols and Cu/polymer Nanocomposites with Amorphous Cu Phase.

Czech Academy of Sciences Publication Activity Database

Pola, Josef; Ouchi, A.; Bakardjieva, Snejana; Urbanová, Markéta; Boháček, Jaroslav; Šubrt, Jan

2007-01-01

Roč. 192, 2-3 (2007) , s. 84-92 ISSN 1010-6030 Institutional research plan: CEZ:AV0Z40720504; CEZ:AV0Z40320502 Keywords : Cu-polymer nanocomposite * laser solution photolysis * amorphous Cu phase Subject RIV: CH - Nuclear ; Quantum Chemistry Impact factor: 1.911, year: 2007

Activation of persulfate/copper by hydroxylamine via accelerating the cupric/cuprous redox couple.

Science.gov (United States)

Zhou, Peng; Zhang, Jing; Liang, Juan; Zhang, Yongli; Liu, Ya; Liu, Bei

2016-01-01

Cuprous copper [Cu(I)] reacts with sodium persulfate (PDS) to generate sulfate radical SO4(-)•, but it has been seldom investigated owing to its instability and difficulty in dissolving it. This study proposes a new method to regenerate Cu(I) from cupric copper [Cu(II)] by addition of hydroxylamine (HA) to induce the continuous production of radicals through active PDS, and investigates the resulting enhanced methyl orange (MO) degradation efficiency and mechanism in the new system. HA accelerated the degradation of MO markedly in the pH range from 6.0 to 8.0 in the HA/Cu(II)/PDS process. Both SO4(-)• and hydroxyl radicals (•OH) were considered as the primary reactive radicals in the process. The MO degradation in the HA/Cu(II)/PDS process can be divided into three stages: the fast stage, the transitory stage, and the low stage. MO degradation was enhanced with increased dosage of PDS. Although high dosage of HA could accelerate the transformation of the Cu(II)/Cu(I) cycle to produce more reactive radicals, excess HA can quench the reactive radicals. This study indicates that through a copper-redox cycling mechanism by HA, the production of SO4(-)• and •OH can be strongly enhanced, and the effective pH range can be expanded to neutral conditions.

Elastin-like protein-hyaluronic acid (ELP-HA) hydrogels with decoupled mechanical and biochemical cues for cartilage regeneration.

Science.gov (United States)

Zhu, Danqing; Wang, Huiyuan; Trinh, Pavin; Heilshorn, Sarah C; Yang, Fan

2017-05-01

Hyaluronic acid (HA) is a major component of cartilage extracellular matrix and is an attractive material for use as 3D injectable matrices for cartilage regeneration. While previous studies have shown the promise of HA-based hydrogels to support cell-based cartilage formation, varying HA concentration generally led to simultaneous changes in both biochemical cues and stiffness. How cells respond to the change of biochemical content of HA remains largely unknown. Here we report an adaptable elastin-like protein-hyaluronic acid (ELP-HA) hydrogel platform using dynamic covalent chemistry, which allows variation of HA concentration without affecting matrix stiffness. ELP-HA hydrogels were created through dynamic hydrazone bonds via the reaction between hydrazine-modified ELP (ELP-HYD) and aldehyde-modified HA (HA-ALD). By tuning the stoichiometric ratio of aldehyde groups to hydrazine groups while maintaining ELP-HYD concentration constant, hydrogels with variable HA concentration (1.5%, 3%, or 5%) (w/v) were fabricated with comparable stiffness. To evaluate the effects of HA concentration on cell-based cartilage regeneration, chondrocytes were encapsulated within ELP-HA hydrogels with varying HA concentration. Increasing HA concentration led to a dose-dependent increase in cartilage-marker gene expression and enhanced sGAG deposition while minimizing undesirable fibrocartilage phenotype. The use of adaptable protein hydrogels formed via dynamic covalent chemistry may be broadly applicable as 3D scaffolds with decoupled niche properties to guide other desirable cell fates and tissue repair. Copyright © 2017 Elsevier Ltd. All rights reserved.

Synthesis, Characterization and Catalytic Activity of Cu/Cu2O Nanoparticles Prepared in Aqueous Medium

Directory of Open Access Journals (Sweden)

Sayed M. Badawy

2015-07-01

Full Text Available Copper/Copper oxide (Cu/Cu2O nanoparticles were synthesized by modified chemical reduction method in an aqueous medium using hydrazine as reducing agent and copper sulfate pentahydrate as precursor. The Cu/Cu2O nanoparticles were characterized by X-ray Diffraction (XRD, Energy Dispersive X-ray Fluorescence (EDXRF, Scanning Electron Microscope (SEM, and Transmission Electron Microscope (TEM. The analysis revealed the pattern of face-centered cubic (fcc crystal structure of copper Cu metal and cubic cuprites structure for Cu2O. The SEM result showed monodispersed and agglomerated particles with two micron sizes of about 180 nm and 800 nm, respectively. The TEM result showed few single crystal particles of face-centered cubic structures with average particle size about 11-14 nm. The catalytic activity of Cu/Cu2O nanoparticles for the decomposition of hydrogen peroxide was investigated and compared with manganese oxide MnO2. The results showed that the second-order equation provides the best correlation for the catalytic decomposition of H2O2 on Cu/Cu2O. The catalytic activity of hydrogen peroxide by Cu/Cu2O is less than the catalytic activity of MnO2 due to the presence of copper metal Cu with cuprous oxide Cu2O. © 2015 BCREC UNDIP. All rights reservedReceived: 6th January 2015; Revised: 14th March 2015; Accepted: 15th March 2015How to Cite: Badawy, S.M., El-Khashab, R.A., Nayl, A.A. (2015. Synthesis, Characterization and Catalytic Activity of Cu/Cu2O Nanoparticles Prepared in Aqueous Medium. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (2: 169-174. (doi:10.9767/bcrec.10.2.7984.169-174 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.2.7984.169-174  

A Study of Hybrid Composite Hydroxyapatite (HA-Geopolymers as a Material for Biomedical Application

Directory of Open Access Journals (Sweden)

Saleha

2017-01-01

Full Text Available The main purpose of this research is to study the physical properties and microstructure characters of hybrid composites HA-geopolymers as a material for biomedical application. Hybrid composite HA–geopolymers were produced through alkaline activation method of metakaolin as a matrix and HA as the filler. HA was synthesized from eggshell particles by using a precipitation method. The addition of HA in metakaolin paste was varied from 0.5%, 1.0%, 1.5%, and 2.0% relative the weight of metakaolin. FTIR was used to examine the absorption bands the composites. X-ray diffraction (XRD was used to study the crystal structure of the starting and the resulting materials. Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS was used to investigate the surface morphology of the composites. The thermal properties of the samples was examined by means of Differential Scanning Calorimetry (DSC. Capacitance measurement was conducted to investigate the bioactive properties of HA. The study results suggest that hybrid composite HA-geopolymers has a potential to be applied as a biomedical such as biosensor material.

Safety analysis report on the ''Paducah Tiger'' protective overpack for 10-ton cylinders of uranium hexafluoride

International Nuclear Information System (INIS)

Stitt, D.H.

1975-01-01

The ''Paducah Tiger'' is a protective overpack used in shipment of 10-ton cylinders of enriched UF 6 . The calculations and tests are described which made and which indicate that the overpack is in compliance with the type B packaging requirements of ERDA Manual Chapter 0529 and Title 10 Code Federal Regulations Part 71. (U.S.)

Synthesis of Cu2O from CuO thin films: Optical and electrical properties

Directory of Open Access Journals (Sweden)

Dhanya S. Murali

2015-04-01

Full Text Available Hole conducting, optically transparent Cu2O thin films on glass substrates have been synthesized by vacuum annealing (5×10−6 mbar at 700 K for 1 hour of magnetron sputtered (at 300 K CuO thin films. The Cu2O thin films are p-type and show enhanced properties: grain size (54.7 nm, optical transmission 72% (at 600 nm and Hall mobility 51 cm2/Vs. The bulk and surface Valence band spectra of Cu2O and CuO thin films are studied by temperature dependent Hall effect and Ultra violet photo electron Spectroscopy (UPS. CuO thin films show a significant band bending downwards (due to higher hole concentration than Cu2O thin films.

{sup 166} Ho-HA Evaluation as therapeutic agent for rheumatoid arthritis treatment; Evaluacion de {sup 166}Ho-Ha como agente terapeutico en el tratamiento de la artritis reumatoidea

Energy Technology Data Exchange (ETDEWEB)

Chandia, M; Errazu, X [Comision Chilena de Energia Nuclear, Santiago (Chile); Mendoza, P [Departamento de Medicina Nuclear, Hospital Militar, Santiago (Chile); Troncoso, F [Comision Chilena de Energia Nuclear, Santiago (Chile); Jofre, J; Sierralta, P [Departamento de Medicina Nuclear, Hospital Militar, Santiago (Chile)

2003-01-01

Aim: Rheumatoid arthritis is a limiting disease having, among its pathological features, the inflammation of synovial tissue with progressive and later destruction of the articulation. This lead to joint deformation and loss of its function, generating pain and reducing the mobility of the affected articulation. The aim was to evaluate {sup 166}Ho-Hydroxyapatite ({sup 166} Ho-HA) as potential radiopharmaceutical for the syntomatic treatment of chronic and acute arthritis Materials and Methods: {sup 166}Holmiun was produced by irradiation of Ho{sub 2}O{sub 3} at La Reina Research Reactor, Nuclear Chilean Energy Commission. Hydroxyapatite was in-house synthetized. Its labelling and quality controls follows the internationally accepted procedures. An antigen arthritis was induced to eight New Zealand rabbits with the {sup 166}Ho-HA radiochemical being administred thereafter in two dosage modalities (single and double). The compound therapeutic efficiency was evaluated based upon clinical improvement and images from the inflamated articulation using {sup 67}Ga citrate before and after {sup 166} Ho-HA injection. Results: The radiochemical purity of the innoculated compound was greater than 98% as measured under sterility conditions. Clinically, an inflamation reduction (2 cm), appetite improvement and general well being was observed. The {sup 166} Ho-HA distribution and localization was monitored using gamma camera images taken at 4 and 24 h. There was no evidence of extraarticular leakage. From the {sup 67}Ga citrate imaging, the acute group shows an overall improvement of well being corresponding to a lesser uptake at the inflamated articulation, regarding to the chronic group. The {sup 166}Ho-HA double dosis, compared to the single dosis, suggest a reduced uptake of {sup 67}Ga citrate at the inflamated tissue, meaning an increased therapeutic effect. Conclusions: {sup 166} Ho-HA is usefull as therapeutic agent for the syntomatic treatment of rheumatoideal arthritis

Hamster endogenous retrovirus (HaER) - distinct properties of structural proteins and DNA polymerase

International Nuclear Information System (INIS)

Goldschmied-Reouven, A.; Yaniv, A.

1983-01-01

The structural proteins as well as some features of the RNA-dependent DNA polymerase of the hamster endogenous retrovirus (HaER) were examined. The polypeptide pattern of this virus is substantially different from that of other known retroviruses in containing major polypeptides with molecular weights of 68000, 59000, 27000, 24000 daltons. Double antibody competitive radioimmunoassays showed that the HaER particles do not share any detectable antigenic relatedness with the murine viruses' p30, but manifest a considerable relatedness with the feline leukemia virus p27 and a slight cross-reactivity with the rat virus major protein. The RNA-dependent DNA polymerase of HaER virus has a molecular size of approximately 73000 daltons and in contrast to other mammalian retroviruses shows no significant preference for Mn 2+ over Mg 2+ . Apart from the lack of antigenic relatedness between the HaER virus proteins and the p30 protein of murine viruses, there is also no antigenic relatedness between HaER and murine viruses insofar as their DNA polymerase is concerned. (Author)

Direct synthesis of RGO/Cu{sub 2}O composite films on Cu foil for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Dong, Xiangmao; Wang, Kun [Key Laboratory for Ultrafine Materials of the Ministry of Education, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237 (China); Zhao, Chongjun, E-mail: chongjunzhao@ecust.edu.cn [Key Laboratory for Ultrafine Materials of the Ministry of Education, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237 (China); Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong 2500 (Australia); Qian, Xiuzhen [Key Laboratory for Ultrafine Materials of the Ministry of Education, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237 (China); Chen, Shi [School of Information Engineering, Wuhan University of Technology, Wuhan 430070 (China); Li, Zhen, E-mail: zhenl@uow.edu.au [Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong 2500 (Australia); Liu, Huakun; Dou, Shixue [Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong 2500 (Australia)

2014-02-15

Graphical abstract: RGO/Cu{sub 2}O/Cu composites were synthesized by simple hydrothermal treatment of copper foils with graphene oxide, in which the reduction of graphene oxide and the formation of Cu{sub 2}O nanoparticles simultaneously happened in one-pot reaction. These composites can be directly used as electrodes of supercapacitors with the highest specific capacitance of 98.5 F/g at 1 A g{sup −1}, which is much better than that of CuO or Cu{sub 2}O electrodes. -- Highlights: • The RGO/Cu{sub 2}O/Cu composites were obtained by a friendly method in one step. • Improved capacitance performance is realized by the hydrothermal treatment of graphene oxides with Cu foils. • RGO/Cu{sub 2}O/Cu-200 composites exhibit the largest specific capacitance of 98.5 F g{sup −1} at 1 A g{sup −1}. -- Abstract: Reduced graphene oxide/cuprous oxide (RGO/Cu{sub 2}O) composite films were directly synthesized on the surface of copper foil substrates through a straight redox reaction between GO and Cu foil via a hydrothermal approach. Characterization of the resultant composites with X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and field emission scanning electron microscope (FESEM) confirms the formation of Cu{sub 2}O and reduction of GO, in which Cu{sub 2}O nanoparticles were well covered by RGO. The resultant composites (referred to as RGO/Cu{sub 2}O/Cu) were directly used as electrodes for supercapacitors, and their electrochemical performance was assessed by cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), and electrochemical impedance spectrometry (EIS) in 1 M KOH aqueous solution. A specific capacitance of 98.5 F g{sup −1} at 1 A g{sup −1} was obtained, which is much higher than that of pure Cu{sub 2}O prepared under the same conditions, due to the presence of RGO.

Integrated Universal Soil Loss Equation (USLE) and Geographical Information System (GIS) for Soil Erosion Measurement in basin of Asap river, Central Vietnam

Science.gov (United States)

Pham Gia, Tung; Degener, Jan; Kappas, Martin

2017-04-01

The study was conducted in Asap river basin, A Luoi district, Thua Thien Hue Province, Vietnam, using the Universal Soil Loss Equation (USLE) and Geographical Information System (GIS) to determine the soil erosion status. The results show strong effect of the heavy rainfall and high slope on the erosion level in the research area. More than 40% of land area lost over 10 tons/ha/year. The natural forest land lost the most by averagely is 38.4 tons/ha/year, while the agricultural land showed less with 2.79 tons for paddy rice land use type and 7.58 tons for upland crops yearly. Comparison between some places of Vietnam and the Southeast Asia showed that soil erosion in watersheds of Asap is more serious. We have been proposed a recommendation on changing the classification system of land use type in Vietnam for more accurate in soil erosion measurement. Keywords: Land use type, Soil erosion, USLE, Central Vietnam.

Effects of Vermicompost and Mycorrhizal Fungi on Growth Characteristics, Essential Oil and Yield of Thyme (Thymus vulgaris L.

Directory of Open Access Journals (Sweden)

Naeemeh Bitarafan

2017-09-01

Full Text Available Introduction Thyme (Thymus vulgaris L. is one of the most important essential oil plants that its essential oil constituent be used in different medicinal and food industries. Vermicompost is organic manure that significant amounts of macro and micronutrients make available to the plants. Although some of this material is minerals but most of them gradually and slowly released through the mineralization of organic matter. Mycorrhizal fungi are one of the biological factors in the rhizosphere, which include a relatively important part of soil organisms. Under water deficit conditions, mycorrhiza enhances photosynthesis and carbon fixation during the growing season by increasing the leaf area. This condition does not directly contribute to increased photosynthesis in the host plant, but keeps the photosynthesis level higher than control by improving water relations and changing the hormonal relations. Materials and methods The treatments included vermicompost in four levels (0, 2, 4, and 6 ton.ha-1 and mycorrhiza in three levels (without inoculation, inoculation with Glomus mosseae and Glomus intraradices was arranged based on randomized complete block design with 12 treatments and 3 replications. Fresh leaf tissue was used to measure chlorophyll content. Dimethyl sulfoxide (7 ml was added to 0.1 g leaf tissue and the samples were incubated at 70°Cfor 4h. The light absorptance was measured at 663, 645 and 470 nm with spectrophotometer (Jenway, 6305 to obtain chlorophyll content. To measure Arbuscular Mycorrhizal (AM symbiosis, plant roots were collected one week before harvesting, cleaned by 10% KOH at 80˚C for 2h, and acidified in 1% HCL for 60 min. Then the cleaned up roots were stained in a solution of trypan blue. The roots were destained in a mixture of 500 ml glycerol, 450 ml water and 5 ml HCL for 24 h, allowing the fungus to be revealed under microscopic examination (Taylor et al. 2008. Statistical analysis: Analysis of variance (ANOVA

Läkaköha - aktuaalne uurimisteema / Marje Oona

Index Scriptorium Estoniae

Oona, Marje, 1963-

2012-01-01

TÜ peremeditsiini õppetooli töötajate poolt algatatud uurimistööst, mille eesmärgiks on uurida Bordetella spp. infektsioonide epidemioloogiat, molekulaargeneetikat ja kliinilisi eripärasid ning selgitada läkaköha sagedasema diagnsimise põhjusi Eestis

Species dependence of [{sup 64}Cu]Cu-Bis(thiosemicarbazone) radiopharmaceutical binding to serum albumins

Energy Technology Data Exchange (ETDEWEB)

Basken, Nathan E. [Division of Nuclear Pharmacy, Department of Industrial and Physical Pharmacy, Purdue University, West Lafayette, IN 47907 (United States)], E-mail: nbasken@purdue.edu; Mathias, Carla J. [Division of Nuclear Pharmacy, Department of Industrial and Physical Pharmacy, Purdue University, West Lafayette, IN 47907 (United States); Lipka, Alexander E. [Department of Statistics, Purdue University, West Lafayette, IN 47907 (United States); Green, Mark A. [Division of Nuclear Pharmacy, Department of Industrial and Physical Pharmacy, Purdue University, West Lafayette, IN 47907 (United States)], E-mail: magreen@purdue.edu

2008-04-15

Introduction: Interactions of three copper(II) bis(thiosemicarbazone) positron emission tomography radiopharmaceuticals with human serum albumin, and the serum albumins of four additional mammalian species, were evaluated. Methods: {sup 64}Cu-labeled diacetyl bis(N{sup 4}-methylthiosemicarbazonato)copper(II) (Cu-ATSM), pyruvaldehyde bis(N{sup 4}-methylthiosemicarbazonato)copper(II) (Cu-PTSM) and ethylglyoxal bis(thiosemicarbazonato)copper(II) (Cu-ETS) were synthesized and their binding to human, canine, rat, baboon and porcine serum albumins quantified by ultrafiltration. Protein binding was also measured for each tracer in human, porcine, rat and mouse serum. Results: The interaction of these neutral, lipophilic copper chelates with serum albumin is highly compound- and species-dependent. Cu-PTSM and Cu-ATSM exhibit particularly high affinity for human serum albumin (HSA), while the albumin binding of Cu-ETS is relatively insensitive to species. At HSA concentrations of 40 mg/ml, '% free' (non-albumin-bound) levels of radiopharmaceutical were 4.0{+-}0.1%, 5.3{+-}0.2% and 38.6{+-}0.8% for Cu-PTSM, Cu-ATSM and Cu-ETS, respectively. Conclusions: Species-dependent variations in radiopharmaceutical binding to serum albumin may need to be considered when using animal models to predict the distribution and kinetics of these compounds in humans.

Operations and Performance of RHIC as a Cu-Cu Collider

CERN Document Server

Pilat, Fulvia Caterina; Bai, Mei; Barton, Donald; Beebe-Wang, Joanne; Blaskiewicz, Michael; Brennan, Joseph M; Bruno, Donald; Cameron, Peter; Connolly, Roger; De Long, Joseph; Drees, Angelika; Fischer, Wolfram; Ganetis, George; Gardner, Chris J; Glenn, Joseph; Harvey, Margaret; Hayes, Thomas; Hseuh Hsiao Chaun; Huang, Haixin; Ingrassia, Peter; Iriso, Ubaldo; Lee, Roger C; Litvinenko, Vladimir N; Luo, Yun; MacKay, William W; Marr, Gregory J; Marusic, Al; Michnoff, Robert; Montag, Christoph; Morris, John; Nicoletti, Tony; Oerter, Brian; Ptitsyn, Vadim; Roser, Thomas; Russo, Thomas; Sandberg, Jon; Satogata, Todd; Schultheiss, Carl; Tepikian, Steven; Tomas, Rogelio; Trbojevic, Dejan; Tsoupas, Nicholaos; Tuozzolo, Joseph; Vetter, Kurt; Zaltsman, Alex; Zeno, Keith; Zhang, S Y; Zhang, Wu

2005-01-01

The 5th year of RHIC operations, started in November 2004 and expected to last till June 2005, consists of a physics run with Cu-Cu collisions at 100 GeV/u followed by one with polarized protons at 100 GeV. We will address here overall performance of the RHIC complex used for the first time as a Cu-Cu collider, and compare it with previous operational experience with Au, PP and asymmetric d-Au collisions. We will also discuss operational improvements, such as a ?* squeeze to 85cm in the high luminosity interaction regions from the design value of 1m, system improvements and machine performance limitations, such as vacuum pressure rise, intra-beam scattering, and beam beam interaction.

The Technology and Properties of Digital Double Pulse Electrodepositing Ni-HA Composite Coating of Bioceramics

Institute of Scientific and Technical Information of China (English)

DONG He-yan; WANG Zhou; SHI Gu-guizhi; FU Chuan-qi; CHEN Wei-rong; JIN Zhong-hong; LI Yan

2004-01-01

This article discusses and analyses the technology, the surface image, microstructure and ability of digital double pulse electrodepositing Ni-HA composite coatings of bioceramics made on 1Crl8Ni9Ti substrate by SEM ,XRD and so on. The results shows that ( 1 ) the HA particles exit in substrate uniformly; (2) XRD result shows that there are HA peaks at 78. 023 ° ,43. 246°and 73. 120°differently; (3) The microhardnees of the composite coatings is increased with the rise of content of HA particles, and on the same conditions the microhardnees value is greater than that of common non-pulse electrodepositing Ni-HA composite coatings of bioceramics. (4) The grain size of digital double pulse electrodepositing Ni-HA composite coatings of bioceramics is much thinner than that of common D. C.

Effect of Cu Salt Molarity on the Nanostructure of CuO Prolate Spheroid

Science.gov (United States)

Sabeeh, Sabah H.; Hussein, Hashim Abed; Judran, Hadia Kadhim

Copper sulfate pentahydrate was used as a source of Cu ion with five different molarities (0.02, 0.05, 0.1, 0.15, 2 and 0.25M). XRD, FE-SEM and TEM techniques all showed that CuO samples have polycrystalline monoclinic structure. CuO prolate spheroid is assembled from nanoparticles as building units. It was demonstrated that the purity, morphology, size range of prolate spheroid and density of nano building units are significantly influenced by Cu precursor’s molarity. The pure phase of CuO prolate spheroid was produced via molarity of 0.2M with crystallite size of 15.1565nm while the particle size of building units ranges from 16nm to 21nm. The stability of CuO nanosuspension or nanofluid was evaluated by zeta potential analysis. The obtained properties of specific structure with large surface area of CuO prolate spheroid make it a promising candidate for wide range of potential applications as in nanofluids for cooling purposes.

Synthesis of Cu Nanoparticles Using Copper Carbonate as Cu Source Toward Versatile Applications.

Science.gov (United States)

Yano, Kazuhisa; Ishizaki, Toshitaka; Sugiyama, Hidehiko

2018-07-01

Cu nanoparticles (NPs) coated with polyvinylpyrrolidone (PVP) were fabricated by polyol method using copper carbonate as a raw material. To increase the reaction temperature, glycol multimers such as diethylene glycol, triethylene glycol, or tetraethylene glycol were examined as a solvent. With increasing degree of multimerization, average diameter of Cu NPs decreased. The synthesis of Cu NPs was further investigated by changing reaction temperature, the amount and molecular weight of PVP in triethylene glycol as a solvent. Average diameter and standard deviation of Cu NPs were found to be highly dependent on those factors. As a result, fine Cu NPs ranging from 28 to 67 nm in average size with narrow size distribution (standard deviation: 16-28%) were obtained. The obtained Cu NPs were applied to a nanofluid, which showed higher thermal conductivity than the theoretical value. The antibacterial activity of Cu NPs was also demonstrated, and found to have strong antibacterial activity.

Elastocaloric effect in CuAlZn and CuAlMn shape memory alloys under compression

OpenAIRE

Qian, Suxin; Geng, Yunlong; Wang, Yi; Pillsbury, Thomas E.; Hada, Yoshiharu; Yamaguchi, Yuki; Fujimoto, Kenjiro; Hwang, Yunho; Radermacher, Reinhard; Cui, Jun; Yuki, Yoji; Toyotake, Koutaro; Takeuchi, Ichiro

2016-01-01

This paper reports the elastocaloric effect of two Cu-based shape memory alloys: Cu68Al16Zn16 (CuAlZn) and Cu73Al15Mn12 (CuAlMn), under compression at ambient temperature. The compression tests were conducted at two different rates to approach isothermal and adiabatic conditions. Upon unloading at a strain rate of 0.1 s−1 (adiabatic condition) from 4% strain, the highest adiabatic temperature changes (ΔTad) of 4.0 K for CuAlZn and 3.9 K for CuAlMn were obtained. The maximum stress and hystere...

c-Ha-ras BamHI RFLP in human urothelial tumors and point mutations in hot codons

International Nuclear Information System (INIS)

Weismanova, E; Skovraga, M.; Kaluz, S.

1993-01-01

High-molecular weights DNAs from 30 bladder and renal cell carcinomas (RCC) were isolated and the c-Ha-ras the c-Ha-ras gene BamHI RFLP was examined. Amplification of c-Ha-ras with normal localization with regard to the size of alleles was found only in the case. One of the normally localized c-Ha-ras allele termed RCC c-H-ras of a length of about 6.6 kbp was cloned and an oncogene-activating point mutation was identified using two restriction enzymes. After comparison of CfrI and Cfr10I cleavage maps of RCC c-Ha-ras to complete nucleotide sequences of EJ/T24 c-Ha-ras oncogene and its normal counterpart, a point mutation was identified within codon 11 or 12. The use of CfrI and Cfr10I is of value for clinical practice in identification of point mutations in c-Ha-ras PCR product in neoplasia accompanied by somatic mutation of c-Ha-ras. The correlation among c-Ha-ras allele, amplification/loss, presence of point mutation and progression of neoplasia is discussed. (author)

Synthesis and photocatalytic activity of carbon spheres loaded Cu2O/Cu composites

International Nuclear Information System (INIS)

Li, Yinhui; Zhao, Mengyao; Zhang, Na; Li, Ruijuan; Chen, Jianxin

2015-01-01

Highlights: • Carbon spheres loaded Cu 2 O/Cu composites are obtained by hydrothermal process. • Cu 2 O/Cu nanocrystals grow on the surface of carbon spheres. • The composites with core–shell structure show highly photo-catalytic activity. • The composites can degrade methyl orange under simulated solar light irradiation. • The composites can be used to treat dye wastewater or organic pollutants. - Abstract: In this work, using amylose as carbon source and cupric acetate as copper source, carbon spheres loaded Cu 2 O/Cu composites were obtained by hydrothermal synthesis. The effects of the molar ratios between glucose and Cu(II), and hydrothermal time on the morphology and sizes of the composites were investigated. The result of photocatalytic experiments demonstrated that the composites could degrade methyl orange in aqueous solution under simulated solar light irradiation. The highest degradation rate was achieved to 93.83% when the composites were prepared by hydrothermal synthesis at 180 °C for 16 h and the molar ratio between glucose and Cu(II) was 10/1. The composites, as new and promising materials, can be used to treat dye wastewater or other organic pollutants

Low-Temperature Cu-Cu Bonding Using Silver Nanoparticles Fabricated by Physical Vapor Deposition

Science.gov (United States)

Wu, Zijian; Cai, Jian; Wang, Junqiang; Geng, Zhiting; Wang, Qian

2018-02-01

Silver nanoparticles (Ag NPs) fabricated by physical vapor deposition (PVD) were introduced in Cu-Cu bonding as surface modification layer. The bonding structure consisted of a Ti adhesive/barrier layer and a Cu substrate layer was fabricated on the silicon wafer. Ag NPs were deposited on the Cu surface by magnetron sputtering in a high-pressure environment and a loose structure with NPs was obtained. Shear tests were performed after bonding, and the influences of PVD pressure, bonding pressure, bonding temperature and annealing time on shear strength were assessed. Cu-Cu bonding with Ag NPs was accomplished at 200°C for 3 min under the pressure of 30 MPa without a post-annealing process, and the average bonding strength of 13.99 MPa was reached. According to cross-sectional observations, a void-free bonding interface with an Ag film thickness of around 20 nm was achieved. These results demonstrated that a reliable low-temperature short-time Cu-Cu bonding was realized by the sintering process of Ag NPs between the bonding pairs, which indicated that this bonding method could be a potential candidate for future ultra-fine pitch 3D integration.

Investigation of Cu-poor and Cu-rich Cu(In,Ga)Se{sub 2}/CdS interfaces using hard X-ray photoelectron spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Ümsür, B., E-mail: buenyamin.uemsuer@helmholtz-berlin.de [Helmholtz-Zentrum-Berlin, Hahn-Meitner-Platz 1, D-14109 Berlin (Germany); Calvet, W.; Höpfner, B.; Steigert, A.; Lauermann, I.; Gorgoi, M.; Prietzel, K.; Navirian, H.A.; Kaufmann, C.A.; Unold, T. [Helmholtz-Zentrum-Berlin, Hahn-Meitner-Platz 1, D-14109 Berlin (Germany); Lux-Steiner, M. Ch. [Helmholtz-Zentrum-Berlin, Hahn-Meitner-Platz 1, D-14109 Berlin (Germany); Freie Universität Berlin, Department of Physics, Arnimallee 14, D-14195 Berlin (Germany)

2015-05-01

Cu-poor and Cu-rich Cu(In,Ga)Se{sub 2} (CIGSe) absorbers were used as substrates for the chemical bath deposition of ultrathin CdS buffer layers in the thickness range of a few nanometers in order to make the CIGSe/CdS interface accessible by hard X-ray photo-emission spectroscopy. The composition of both, the absorber and the buffer layer as well as the energetics of the interface was investigated at room temperature and after heating the samples to elevated temperatures (200 °C, 300 °C and 400 °C). It was found that the amount of Cd after the heating treatment depends on the near surface composition of the CIGSe absorber. No Cd was detected on the Cu-poor surface after the 400 °C treatment due to its diffusion into the CIGSe layer. In contrast, Cd was still present on the Cu-rich surface after the same treatment at 400 °C. - Highlights: • Cd diffusion into Cu(In,Ga)Se{sub 2} (CIGSe) absorber is investigated. • Cu-poor and Cu-rich CIGSe samples are compared. • Cd diffusion into CIGSe is found to be dependent on the surface composition of CIGSe.

Cu-Doping Effects in CdI(2) Nanocrystals: The Role of Cu-Agglomerates.

Science.gov (United States)

Miah, M Idrish

2008-11-22

Cu-doping effects in CdI(2) nanocrystals are studied experimentally. We use the photostimulated second harmonic generation (PSSHG) as a tool to investigate the effects. It is found that the PSSHG increases with increasing Cu content up to 0.6% and then decreases due to the formation of the Cu-agglomerates. The PSSHG for the crystal with Cu content higher than 1% reduces to that for the undoped CdI(2) crystal. The results suggest that a crucial role of the Cu-metallic agglomerates is involved in the processes as responsible for the observed effects.

Cu-Doping Effects in CdI2Nanocrystals: The Role of Cu-Agglomerates

Directory of Open Access Journals (Sweden)

Miah M

2008-01-01

Full Text Available Abstract Cu-doping effects in CdI2nanocrystals are studied experimentally. We use the photostimulated second harmonic generation (PSSHG as a tool to investigate the effects. It is found that the PSSHG increases with increasing Cu content up to 0.6% and then decreases due to the formation of the Cu-agglomerates. The PSSHG for the crystal with Cu content higher than 1% reduces to that for the undoped CdI2crystal. The results suggest that a crucial role of the Cu-metallic agglomerates is involved in the processes as responsible for the observed effects.

Crystallization and electrical resistivity of Cu{sub 2}O and CuO obtained by thermal oxidation of Cu thin films on SiO{sub 2}/Si substrates

Energy Technology Data Exchange (ETDEWEB)

De Los Santos Valladares, L., E-mail: ld301@cam.ac.uk [Cavendish Laboratory, University of Cambridge, J.J Thomson Av., Cambridge CB3 0HE (United Kingdom); Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan); Departamento de Fisica, Universidade Federal de Pernambuco, 50670-901, Recife-Pe (Brazil); Salinas, D. Hurtado [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan); Laboratorio de Ceramicos y Nanomateriales, Facultad de Ciencias Fisicas, Universidad Nacional Mayor de San Marcos, Ap. Postal 14-0149, Lima (Peru); Dominguez, A. Bustamante [Laboratorio de Ceramicos y Nanomateriales, Facultad de Ciencias Fisicas, Universidad Nacional Mayor de San Marcos, Ap. Postal 14-0149, Lima (Peru); Najarro, D. Acosta [Instituto de Fisica, Departamento de Materia Condensada, Universidad Nacional Autonoma de Mexico, Ap. Postal 20-364, CP 01000 (Mexico); Khondaker, S.I. [NanoScience Technology Centre and Department of Physics, University of Central Florida, Orlando, FL 32826 (United States); Mitrelias, T.; Barnes, C.H.W. [Cavendish Laboratory, University of Cambridge, J.J Thomson Av., Cambridge CB3 0HE (United Kingdom); Aguiar, J. Albino [Departamento de Fisica, Universidade Federal de Pernambuco, 50670-901, Recife-Pe (Brazil); Majima, Y. [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan); CREST, Japan Science and Technology Agency (JST), 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan)

2012-08-01

In this work, we study the crystallization and electrical resistivity of the formed oxides in a Cu/SiO{sub 2}/Si thin film after thermal oxidation by ex-situ annealing at different temperatures up to 1000 Degree-Sign C. Upon increasing the annealing temperature, from the X ray diffractogram the phase evolution Cu {yields} Cu + Cu{sub 2}O {yields} Cu{sub 2}O {yields} Cu{sub 2}O + CuO {yields} CuO was detected. Pure Cu{sub 2}O films are obtained at 200 Degree-Sign C, whereas uniform CuO films without structural surface defects such as terraces, kinks, porosity or cracks are obtained in the temperature range 300-550 Degree-Sign C. In both oxides, crystallization improves with annealing temperature. A resistivity phase diagram, which is obtained from the current-voltage response, is presented here. The resistivity was expected to increase linearly as a function of the annealing temperature due to evolution of oxides. However, anomalous decreases are observed at different temperatures ranges, this may be related to the improvement of the crystallization and crystallite size when the temperature increases. - Highlights: Black-Right-Pointing-Pointer The crystallization and electrical resistivity of oxides in a Cu films are studied. Black-Right-Pointing-Pointer In annealing Cu films, the phase evolution Cu + Cu{sub 2}O {yields} Cu{sub 2}O {yields} Cu{sub 2}O + CuO {yields} CuO occurs. Black-Right-Pointing-Pointer A resistivity phase diagram, obtained from the current-voltage response, is presented. Black-Right-Pointing-Pointer Some decreases in the resistivity may be related to the crystallization.

Room temperature Cu-Cu direct bonding using surface activated bonding method

International Nuclear Information System (INIS)

Kim, T.H.; Howlader, M.M.R.; Itoh, T.; Suga, T.

2003-01-01

Thin copper (Cu) films of 80 nm thickness deposited on a diffusion barrier layered 8 in. silicon wafers were directly bonded at room temperature using the surface activated bonding method. A low energy Ar ion beam of 40-100 eV was used to activate the Cu surface prior to bonding. Contacting two surface-activated wafers enables successful Cu-Cu direct bonding. The bonding process was carried out under an ultrahigh vacuum condition. No thermal annealing was required to increase the bonding strength since the bonded interface was strong enough at room temperature. The chemical constitution of the Cu surface was examined by Auger electron spectroscope. It was observed that carbon-based contaminations and native oxides on copper surface were effectively removed by Ar ion beam irradiation for 60 s without any wet cleaning processes. An atomic force microscope study shows that the Ar ion beam process causes no surface roughness degradation. Tensile test results show that high bonding strength equivalent to bulk material is achieved at room temperature. The cross-sectional transmission electron microscope observations reveal the presence of void-free bonding interface without intermediate layer at the bonded Cu surfaces

Facile synthesis of Cu2O/CuO/RGO nanocomposite and its superior cyclability in supercapacitor

International Nuclear Information System (INIS)

Wang, Kun; Dong, Xiangmao; Zhao, Chongjun; Qian, Xiuzhen; Xu, Yunlong

2015-01-01

A reduced graphene oxide (RGO)-based nanocomposite of redox counterpart of the oxides of Cu(I)-Cu(II) pair for Faradaic reaction, Cu 2 O/CuO/RGO, was controllably synthesized through a facile, eco-friendly one-step hydrothermal-assisted redox reaction of elemental Cu and graphene oxide (GO) without the addition of any other reagents. The resultant Cu 2 O/CuO/RGO nanocomposites were characterized by X-ray diffraction (XRD), Raman spectroscopy, Thermogravimetric analysis (TG), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). It is found that, when dealloyed nanoporous Cu was used as a Cu source, the uniform spherical Cu 2 O/CuO nanoparticles with double size scales (∼25 nm and ∼5 nm) were anchored on RGO sheets. This Cu 2 O/CuO/RGO nanocomposite redox counterpart exhibits improved rate capability and excellent cycling stability, i.e., only ca. 21.4% of the capacity was lost when the discharge current density increases from 1 A g −1 (173.4 F g −1 ) to 10 A g −1 (136.3 F g −1 ). Especially, the capacity remains almost unchanged (98.2%) after 100,000 cycles at 10 A g −1 . The good electrochemical performance and simple accessibility prove that this Cu 2 O/CuO/RGO composite consisting of a pair of redox counterparts is a promising material for supercapacitor applications

Fabrication and in vitro biocompatibility of biomorphic PLGA/nHA composite scaffolds for bone tissue engineering

International Nuclear Information System (INIS)

Qian, Junmin; Xu, Weijun; Yong, Xueqing; Jin, Xinxia; Zhang, Wei

2014-01-01

In this study, biomorphic poly(DL-lactic-co-glycolic acid)/nano-hydroxyapatite (PLGA/nHA) composite scaffolds were successfully prepared using cane as a template. The porous morphology, phase, compression characteristics and in vitro biocompatibility of the PLGA/nHA composite scaffolds and biomorphic PLGA scaffolds as control were investigated. The results showed that the biomorphic scaffolds preserved the original honeycomb-like architecture of cane and exhibited a bimodal porous structure. The average channel diameter and micropore size of the PLGA/nHA composite scaffolds were 164 ± 52 μm and 13 ± 8 μm, respectively, with a porosity of 89.3 ± 1.4%. The incorporation of nHA into PLGA decreased the degree of crystallinity of PLGA, and significantly improved the compressive modulus of biomorphic scaffolds. The in vitro biocompatibility evaluation with MC3T3-E1 cells demonstrated that the biomorphic PLGA/nHA composite scaffolds could better support cell attachment, proliferation and differentiation than the biomorphic PLGA scaffolds. The localization depth of MC3T3-E1 cells within the channels of the biomorphic PLGA/nHA composite scaffolds could reach approximately 400 μm. The results suggested that the biomorphic PLGA/nHA composite scaffolds were promising candidates for bone tissue engineering. - Highlights: • Novel biomimetic PLGA/nHA composite scaffolds were successfully prepared. • nHA addition improved elastic modulus of PLGA scaffold and decreased its crystallinity. • PLGA/nHA composite scaffolds had better biocompatibility than PLGA scaffolds. • Biomorphic PLGA/nHA composite scaffold had great potential in bone tissue engineering

Fabrication and in vitro biocompatibility of biomorphic PLGA/nHA composite scaffolds for bone tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Qian, Junmin, E-mail: jmqian@mail.xjtu.edu.cn; Xu, Weijun; Yong, Xueqing; Jin, Xinxia; Zhang, Wei

2014-03-01

In this study, biomorphic poly(DL-lactic-co-glycolic acid)/nano-hydroxyapatite (PLGA/nHA) composite scaffolds were successfully prepared using cane as a template. The porous morphology, phase, compression characteristics and in vitro biocompatibility of the PLGA/nHA composite scaffolds and biomorphic PLGA scaffolds as control were investigated. The results showed that the biomorphic scaffolds preserved the original honeycomb-like architecture of cane and exhibited a bimodal porous structure. The average channel diameter and micropore size of the PLGA/nHA composite scaffolds were 164 ± 52 μm and 13 ± 8 μm, respectively, with a porosity of 89.3 ± 1.4%. The incorporation of nHA into PLGA decreased the degree of crystallinity of PLGA, and significantly improved the compressive modulus of biomorphic scaffolds. The in vitro biocompatibility evaluation with MC3T3-E1 cells demonstrated that the biomorphic PLGA/nHA composite scaffolds could better support cell attachment, proliferation and differentiation than the biomorphic PLGA scaffolds. The localization depth of MC3T3-E1 cells within the channels of the biomorphic PLGA/nHA composite scaffolds could reach approximately 400 μm. The results suggested that the biomorphic PLGA/nHA composite scaffolds were promising candidates for bone tissue engineering. - Highlights: • Novel biomimetic PLGA/nHA composite scaffolds were successfully prepared. • nHA addition improved elastic modulus of PLGA scaffold and decreased its crystallinity. • PLGA/nHA composite scaffolds had better biocompatibility than PLGA scaffolds. • Biomorphic PLGA/nHA composite scaffold had great potential in bone tissue engineering.

Mine design for producing 100,000 tons per day of uranium-bearing Chattanooga Shale

International Nuclear Information System (INIS)

Hoe, H.L.

1979-01-01

Chattanooga Shale, underlying some 40,000 square miles in the southeastern United States, is considered to be a potentially large, low-grade source of uranium. The area in and near Dekalb County, Tennessee, appears to be the most likely site for commercial development. This paper deals with the mine design, mining procedures, equipment requirements, and operating maintenance costs for an underground mining complex capable of producing 100,000 tons of Chattanooga Shale per day for delivery to a beneficiation process

Measured performance of a 3 ton LiBr absorption water chiller and its effect on cooling system operation

Science.gov (United States)

Namkoong, D.

1976-01-01

A three ton lithium bromide absorption water chiller was tested for a number of conditions involving hot water input, chilled water, and the cooling water. The primary influences on chiller capacity were the hot water inlet temperature and the cooling water inlet temperature. One combination of these two parameters extended the output to as much as 125% of design capacity, but no combination could lower the capacity to below 60% of design. A cooling system was conceptually designed so that it could provide several modes of operation. Such flexibility is needed for any solar cooling system to be able to accommodate the varying solar energy collection and the varying building demand. It was concluded that a three-ton absorption water chiller with the kind of performance that was measured can be incorporated into a cooling system such as that proposed, to provide efficient cooling over the specified ranges of operating conditions.

Measured performance of a 3-ton LiBr absorption water chiller and its effect on cooling system operation

Science.gov (United States)

Namkoong, D.

1976-01-01

A 3-ton lithium bromide absorption water chiller was tested for a number of conditions involving hot-water input, chilled water, and the cooling water. The primary influences on chiller capacity were the hot water inlet temperature and the cooling water inlet temperature. One combination of these two parameters extended the output to as much as 125% of design capacity, but no combination could lower the capacity to below 60% of design. A cooling system was conceptually designed so that it could provide several modes of operation. Such flexibility is needed for any solar cooling system to be able to accommodate the varying solar energy collection and the varying building demand. It is concluded that a 3-ton absorption water chiller with the kind of performance that was measured can be incorporated into a cooling system such as that proposed, to provide efficient cooling over the specified ranges of operating conditions.

SEWAGE SLUDGE EFFECTS ON POTATO, WINTER WHEAT AND MAIZE YIELD CULTIVATED IN ROTATION, AND SOIL PROPERTY MODIFICATION

Directory of Open Access Journals (Sweden)

Gh. Lixandru

2005-10-01

.1 kg/t sewage sludge applied in the previous year at a rate of 65 t/ha and only 3.7 kg/t at 195 t/ha. At a rate of 100 kg N/ha mineral fertilizer resulted in an yield increase of 4.9 kg grains/1 kg N. Maize yield in the third year after sewage sludge application increased by 11 kg grains/ton at a rate of 65 t/ha and only by 3.8 kg/t at 195 t/ha. Ammonium nitrate alone increased yield maize by 10.6 kg grains for 1 kg N. Plant utilization of N from sewage sludge during 3 years was of 17.5 % at a rate of 65 t/ha sewage sludge and only 6.5 % at rate of 195 t/ha. 6 The sewage sludge has increased soil pH by 0.2 units 3 years after the application of 65 t/ha, due to high amounts of Ca present in it. The content of accessible phosphates from soil fertilized by 65 t/ha sewage sludge increased significantly, existing the danger of soil overphosphatizing, with negative consequences on the plant nutrition. The total content of of Cu, Ni, Pb, Co and Mn from soil had easily increased on plots amended by 60-90 t/ha sewage sludge, doubled or tripled in case of Zn and remained unchanged in case of Cd. 8 Soil contamination by pathogenic germs remains low, Salmonella was absent, existing only the contamination with eggs of intestinal worms. 9 Sewage sludge between 30-60 t/ha had residual effect for at least 3 years. Periodical soil analyses on Zn and PAL content are indispensable, in order not exceed the allowable maximum limits. Our data have showed that the rate of sewage sjudge on chernozem must not exceed 400 kg P/ha.

Based on Cu as framework constructed nanoporous CuO/Cu composites by a dealloy method for sodium-ion battery anode

Science.gov (United States)

Zheng, Tian; Li, Guangda; Li, Deming; Meng, Xiangeng

2018-05-01

Nanoporous CuO/Cu composites with a continuous channel structure were fabricated through a corroding Cu-Al alloy process. The width of the continuous channels was about 20 50 nm. Nanoporous structure could effectively sustain the volume expansion during the Na+ insertion/extraction process and shorten the Na+ diffusion length as well, which thus helps improve the Na+ storage performance. Moreover, the nanoporous structure can improve the contact area between the electrolyte and the electrode, leading to an increment in the number of Na+ insertion/extraction sites. When used as the anode for sodium-ion batteries, the CuO/Cu exhibited an initial capacity of 580 mAh g-1, and the capacity is maintained at 200 mAh g-1 after 200 cycles at a current density of 500 mA g-1.

Fabrication and Characterization of Collagen-Immobilized Porous PHBV/HA Nano composite Scaffolds for Bone Tissue Engineering

International Nuclear Information System (INIS)

Jin-Young, B.; Zhi-Cai, X.; Giseop, K.; Keun-Byoung, Y.; Soo-Young, P.; Lee, S.P.; Inn-Kyu, K.

2012-01-01

The porous composite scaffolds (PHBV/HA) consisting of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and hydroxyapatite (HA) were fabricated using a hot-press machine and salt-leaching. Collagen (type I) was then immobilized on the surface of the porous PHBV/HA composite scaffolds to improve tissue compatibility. The structure and morphology of the collagen-immobilized composite scaffolds (PHBV/HA/Col) were investigated using a scanning electron microscope (SEM), Fourier transform infrared (FTIR), and electron spectroscopy for chemical analysis (ESCA). The potential of the porous PHBV/HA/Col composite scaffolds for use as a bone scaffold was assessed by an experiment with osteoblast cells (MC3T3-E1) in terms of cell adhesion, proliferation, and differentiation. The results showed that the PHBV/HA/Col composite scaffolds possess better cell adhesion and significantly higher proliferation and differentiation than the PHBV/HA composite scaffolds and the PHBV scaffolds. These results suggest that the PHBV/HA/Col composite scaffolds have a high potential for use in the field of bone regeneration and tissue engineering.

Reheating experiment in the 35-ton pile

International Nuclear Information System (INIS)

Cherot, J.; Girard, Y.

1957-01-01

When the 35-ton pile was started up it was necessary for us, in order to study certain effects (xenon for example), to know the anti reactivity value of the rods as a function of their dimensions. We have made use of the possibility, in the reheating experiment, of raising the temperature of the graphite-uranium block by simple heating, in order to determine the anti reactivity curves of the rods, and from that the overall temperature coefficient. For the latter we have considered two solutions: first, one in which the average temperature of the pile is defined as our arithmetical mean of the different values given by the 28 thermocouples distributed throughout the pile; a second in which the temperature in likened to a poisoning and is balanced by the square of the flux. The way in which the measurements have been made is indicated, and the different instruments used are described. The method of reheating does not permit the separation of the temperature coefficients of uranium and of graphite. The precision obtained is only moderate, and suffers from the changes of various parameters necessary to other manipulations carried out simultaneously (life time modulators for example), and finally it is a function of the comparatively restricted time allowed. It is evident of course that more careful stabilisation at the different plateaux chosen would have necessitated long periods of reheating. (author) [fr

RESOURCE USE EFFICIENCY OF GROUNDNUT PRODUCTION IN ...

African Journals Online (AJOL)

AGROSEARCH UIL

2012-09-28

Sep 28, 2012 ... A stratified sampling technique was employed to select 58 respondents. ... there is still opportunity to increase their production to attain optimal economic efficiency. The ... metric tons and an average productivity of 1.4 metric tons /ha. Developing ... The educated population are gainfully employed in some.

Mishima jo ha kyu

Directory of Open Access Journals (Sweden)

Matteo Casari

2012-01-01

Full Text Available Abstract – IT La grandezza artistica di Mishima si è espressa attraverso una eterogenea gamma di linguaggi tra i quali il teatro – nella drammaturgia ma anche nella saggistica, regia, recitazione e direzione di compagnia – ha avuto un ruolo di primo piano. Al pari di un uomo di scena Mishima inaugura, a partire dagli anni ’50, un processo di attenzione al proprio corpo come possibile, anzi necessario, veicolo di estrinsecazione etico-estetica tanto da poter istituire l’equazione corpo-teatro quale snodo profondo del suo processo creativo. Il corpo sognato e ottenuto da Mishima attraverso l’addestramento nel kendo, in altre arti marziali e nel body building si conformava ad un ideale estetico di matrice greco-classica assai lontano dal corpo teatrale nipponico. Il corpo come luogo di elaborazione e strumento di espressione autentica da realizzare con impegno, però, lo legano profondamente alle esperienze nascenti – tra gli anni ’50 e ’60 – delle avanguardie teatrali giapponesi. La metafora teatrale è spesso usata nella lettura critica del Mishima uomo e artista con accezione deteriore: un personaggio che dà spettacolo di sé con ripetute provocazioni tra le quali il suicidio del 25 novembre 1970 non sarebbe che l’esempio ultimo e più estremo. La costruzione di sé come personaggio, invece, sembrerebbe corrispondere ad una ben più profonda e meditata necessità di comporre la propria vita in una sapiente messa in scena di classica perfezione: i principi della scansione ritmico formale del jo ha kyu, pilastro teorico del teatro no codificato da Zeami tra XIV e XV secolo, offrono un valido modello di riferimento. Abstract – EN Mishima’s artistic greatness has been expressed through a diverse range of languages among wich theater – in dramaturgy as well as in written essays, as a director, performer and in company direction – played a central role. As a true front-man, Mishima – starting from the 50’s �

Atomistic models of Cu diffusion in CuInSe2 under variations in composition

Science.gov (United States)

Sommer, David E.; Dunham, Scott T.

2018-03-01

We construct an analytic model for the composition dependence of the vacancy-mediated Cu diffusion coefficient in undoped CuInSe2 using parameters from density functional theory. The applicability of this model is supported numerically with kinetic lattice Monte Carlo and Onsager transport tensors. We discuss how this model relates to experimental measurements of Cu diffusion, arguing that our results can account for significant contributions to the bulk diffusion of Cu tracers in non-stoichiometric CuInSe2.

Interfacial Reaction of Sn-Ag-Cu Lead-Free Solder Alloy on Cu: A Review

Directory of Open Access Journals (Sweden)

Liu Mei Lee

2013-01-01

Full Text Available This paper reviews the function and importance of Sn-Ag-Cu solder alloys in electronics industry and the interfacial reaction of Sn-Ag-Cu/Cu solder joint at various solder forms and solder reflow conditions. The Sn-Ag-Cu solder alloys are examined in bulk and in thin film. It then examines the effect of soldering conditions to the formation of intermetallic compounds such as Cu substrate selection, structural phases, morphology evolution, the growth kinetics, temperature and time is also discussed. Sn-Ag-Cu lead-free solder alloys are the most promising candidate for the replacement of Sn-Pb solders in modern microelectronic technology. Sn-Ag-Cu solders could possibly be considered and adapted in miniaturization technologies. Therefore, this paper should be of great interest to a large selection of electronics interconnect materials, reliability, processes, and assembly community.

Tricalcium phosphate/hydroxyapatite (TCP-HA) bone scaffold as potential candidate for the formation of tissue engineered bone.

Science.gov (United States)

Sulaiman, Shamsul Bin; Keong, Tan Kok; Cheng, Chen Hui; Saim, Aminuddin Bin; Idrus, Ruszymah Bt Hj

2013-06-01

Various materials have been used as scaffolds to suit different demands in tissue engineering. One of the most important criteria is that the scaffold must be biocompatible. This study was carried out to investigate the potential of HA or TCP/HA scaffold seeded with osteogenic induced sheep marrow cells (SMCs) for bone tissue engineering. HA-SMC and TCP/HA-SMC constructs were induced in the osteogenic medium for three weeks prior to implantation in nude mice. The HA-SMC and TCP/HA-SMC constructs were implanted subcutaneously on the dorsum of nude mice on each side of the midline. These constructs were harvested after 8 wk of implantation. Constructs before and after implantation were analyzed through histological staining, scanning electron microscope (SEM) and gene expression analysis. The HA-SMC constructs demonstrated minimal bone formation. TCP/HA-SMC construct showed bone formation eight weeks after implantation. The bone formation started on the surface of the ceramic and proceeded to the centre of the pores. H&E and Alizarin Red staining demonstrated new bone tissue. Gene expression of collagen type 1 increased significantly for both constructs, but more superior for TCP/HA-SMC. SEM results showed the formation of thick collagen fibers encapsulating TCP/HA-SMC more than HA-SMC. Cells attached to both constructs surface proliferated and secreted collagen fibers. The findings suggest that TCP/HA-SMC constructs with better osteogenic potential compared to HA-SMC constructs can be a potential candidate for the formation of tissue engineered bone.

A study on improving mechanical properties of porous HA tissue engineering scaffolds by hot isostatic pressing

International Nuclear Information System (INIS)

Zhao Jing; Xiao Suguang; Lu Xiong; Wang Jianxin; Weng Jie

2006-01-01

Various interconnected porous hydroxyapatite (HA) ceramic scaffolds are universally used to induct the tissue growth for bone repair and replacement, and serve to support the adhesion, transfer, proliferation and differentiation of cells. Impregnation of polyurethane sponges with a ceramic slurry is adopted to produce highly porous HA ceramic scaffolds with a 3D interconnected structure. However, high porosity always accompanies a decrease in the strength of the HA ceramic scaffolds. Therefore, it is significant to improve the strength of the HA ceramic scaffolds with highly interconnected porosity so that they are more suitable in clinical applications. In this work, highly porous HA ceramic scaffolds are first produced by the polymer impregnation approach, and subsequently further sintered by hot isostatic pressing (HIP). The phase composition, macro- and micro-porous structure, sintering and mechanical properties of the porous HA scaffolds are investigated by x-ray diffraction (XRD), scanning electron microscopy (SEM), nanoindentation analysis and compressive test. The experimental results show that the nanohardness and compressive strength of HIP-sintered porous HA ceramics are higher than those of commonly sintered HA scaffolds. The HIP technique can effectively improve the sintering property and densification of porous HA ceramic scaffolds, so inducing an increase in the compression strength

Magnetron sputtered Cu{sub 3}N/NiTiCu shape memory thin film heterostructures for MEMS applications

Energy Technology Data Exchange (ETDEWEB)

Kaur, Navjot; Choudhary, Nitin [Indian Institute of Technology Roorkee, Roorkee, Functional Nanomaterials Research Lab, Department of Physics and Centre of Nanotechnology (India); Goyal, Rajendra N. [Indian Institute of Technology, Roorkee, Department of Chemistry (India); Viladkar, S. [Indian Institute of Technology Roorkee, Roorkee, Functional Nanomaterials Research Lab, Department of Physics and Centre of Nanotechnology (India); Matai, I.; Gopinath, P. [Indian Institute of Technology, Roorkee, Centre for Nanotechnology (India); Chockalingam, S. [Indian Institute of Technology, Guwahati, Department of Biotechnology (India); Kaur, Davinder, E-mail: dkaurfph@iitr.ernet.in [Indian Institute of Technology Roorkee, Roorkee, Functional Nanomaterials Research Lab, Department of Physics and Centre of Nanotechnology (India)

2013-03-15

In the present study, for the first time, Cu{sub 3}N/NiTiCu/Si heterostructures were successfully grown using magnetron sputtering technique. Nanocrystalline copper nitride (Cu{sub 3}N with thickness {approx}200 nm) thin films and copper nanodots were subsequently deposited on the surface of 2-{mu}m-thick NiTiCu shape memory thin films in order to improve the surface corrosion and nickel release properties of NiTiCu thin films. Interestingly, the phase transformation from martensite phase to austenite phase has been observed in Cu{sub 3}N/NiTiCu heterostructures with corresponding change in texture and surface morphology of top Cu{sub 3}N films. Field emission scanning electron microscopy and atomic force microscope images of the heterostructures reveals the formation of 20-nm-sized copper nanodots on NiTiCu surface at higher deposition temperature (450 Degree-Sign C) of Cu{sub 3}N. Cu{sub 3}N passivated NiTiCu films possess low corrosion current density with higher corrosion potential and, therefore, better corrosion resistance as compared to pure NiTiCu films. The concentration of Ni released from the Cu{sub 3}N/NiTiCu samples was observed to be much less than that of pure NiTiCu film. It can be reduced to the factor of about one-ninth after the surface passivation resulting in smooth, homogeneous and highly corrosion resistant surface. The antibacterial and cytotoxicity of pure and Cu{sub 3}N coated NiTiCu thin films were investigated through green fluorescent protein expressing E. coli bacteria and human embryonic kidney cells. The results show the strong antibacterial property and non cytotoxicity of Cu{sub 3}N/NiTiCu heterostructure. This work is of immense technological importance due to variety of BioMEMS applications.

Evaluation of the potential for biosolids obtained from wastewater treatment for agricultural use and their effect on cultivation of red radish (Raphanus sativus L)

International Nuclear Information System (INIS)

Ramirez Pisco, Ramiro; Perez Arenas, Martha Ines

2006-01-01

This study was conducted in waste water treatment plant The Salitre, in Bogota, to evaluate the potential of the waste water treatment subproduct biosolids for application in agriculture by means of quantifying growth, development and production of cultivation of red radish, and to establish a possible alternative to the problem of final disposition of 3900 tons of this material generated monthly in the waste water treatment plant. The experimental design employed was a random blocks design, with five treatments and three replications, arranged in 2 m x 2 m plots. the treatments corresponded to mixtures of biosolids with soil in the following proportions: 100 % biosolid (equivalent to 294 ton ha-1), 75 % biosolid (220 ton ha-1), 50 % biosolid (147 ton ha-1), 25 % biosolid (73 ton ha-1) and. 100 % soil. Red radish raphanus sativus l. was planted. the variables evaluated were: germination percentage, dry weight of leaves and. roots, plant length, foliar area and production. Also, the accumulation of trace was measured in the harvested radishes, to determine risks of consumption. The results showed that the 50 % biosolid and 25 % biosolid, treatments were those that most favored growth, development and. production of cultivation radish, while the 75 % biosolid and 100 % biosolid treatments, showed lower development growth and production of the cultivar. The 100 % biosolid treatment resulted in low germination and also did not show root accumulation, that is the harvested product. The levels of accumulation of heavy metals surpassed the maximum levels with the 75 % biosolid and 100 % biosolid treatment. It was shown that the use of the biosolids in agriculture can produce a great risk, because despite having high nutrient (C,N, P, Ca, Na, Fe y Zn) and organic matter content, it also may slow growth and production of radish plants

The structure of molten CuCl, CuI and their mixtures as investigated by using neutron diffraction

International Nuclear Information System (INIS)

Drewitt, James W E; Salmon, Philip S; Takeda, Shin'ichi; Kawakita, Yukinobu

2009-01-01

The structure of molten CuCl, CuI and their mixtures (CuCl) x (CuI) 1-x with x = 0.294, 0.576, 0.801 was studied by using neutron diffraction. The results are discussed by reference to the information that is available on the structure of CuCl and CuI from experiment, theory and computer simulation. The comparison points to a need for more realistic models for the CuCl-CuI system which should take into account the presence of chemical bonds that have been found in CuI by the application of ab initio molecular dynamics methods.

Facile synthesis of dendritic Cu by electroless reaction of Cu-Al alloys in multiphase solution

Science.gov (United States)

Wang, Ying; Liang, Shuhua; Yang, Qing; Wang, Xianhui

2016-11-01

Two-dimensional nano- or micro-scale fractal dendritic coppers (FDCs) were synthesized by electroless immersing of Cu-Al alloys in hydrochloric acid solution containing copper chloride without any assistance of template or surfactant. The FDC size increases with the increase of Al content in Cu-Al alloys immersed in CuCl2 + HCl solution. Compared to Cu40Al60 and Cu45Al55 alloys, the FDC shows hierarchical distribution and homogeneous structures using Cu17Al83 alloy as the starting alloy. The growth direction of the FDC is , and all angles between the trunks and branches are 60°. Nanoscale Cu2O was found at the edge of FDC. Interestingly, nanoporous copper (NPC) can also be obtained through Cu17Al83 alloy. Studies showed that the formation of FDC depended on two key factors: the potential difference between CuAl2 intermetallic and α-Al phase of dual-phase Cu-Al alloys; a replacement reaction that usually occurs in multiphase solution. The electrochemical experiment further proved that the multi-branch dendritic structure is very beneficial to the proton transfer in the process of catalyzing methanol.

Trehalose improves cell proliferation and dehydration tolerance of human HaCaT cells

Directory of Open Access Journals (Sweden)

Lee Kyung Eun

2015-01-01

Full Text Available Trehalose is a disaccharide molecule that serves as a natural osmotic regulator in halophilic microorganisms and plants but not in mammals. We observed that human HaCaT cells supplied with trehalose improved cell proliferation and extended viability under dehydration. In HaCaT cells, in response to increasing concentrations of exogenous trehalose, the levels of heat shock protein (HSP 70 increased and matrix metalloproteinase (MMP 1 decreased. Proteome analysis of trehalose-treated HaCaT cells revealed remarkable increases in the levels of proteins involved in cell signaling and the cell cycle, including p21 activated kinase I, Sec I family domain protein and elongation factor G. Moreover, the proteins for cell stress resistance, tryptophan hydroxylase, serine/cysteine proteinase inhibitors and vitamin D receptors were also increased. In addition, the proteins responsible for the maintenance of the cytoskeleton and cellular structures including procollagen-lysine dioxygenase, vinculin and ezrin were increased. Proteomic data revealed that trehalose affected HaCaT cells by inducing the proteins involved in cell proliferation. These results suggest that trehalose improves the proliferation and dehydration tolerance of HaCaT cells by inducing proteins involved in cell growth and dehydration protection.

Recycled tetrahedron-like CuCl from waste Cu scraps for lithium ion battery anode.

Science.gov (United States)

Hou, Hongying; Yao, Yuan; Liu, Song; Duan, Jixiang; Liao, Qishu; Yu, Chengyi; Li, Dongdong; Dai, Zhipeng

2017-07-01

The wide applications of metal Cu inevitably resulted in a large quantity of waste Cu materials. In order to recover the useful Cu under the mild conditions and reduce the environmental emission, waste Cu scraps were recycled in the form of CuCl powders with high economic value added (EVA) via the facile hydrothermal route. The recycled CuCl powders were characterized in terms of scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The results suggested that the recycled CuCl powders consisted of many regular tetrahedron-like micro-particles. Furthermore, in order to reduce the cost of lithium ion battery (LIB) anode and build the connection of waste Cu scraps and LIB, the recycled CuCl powders were evaluated as the anode active material of LIB. As expected, the reversible discharge capacity was about 171.8mAh/g at 2.0C even after 50 cycles, implying the satisfactory cycle stability. Clearly, the satisfactory results may open a new avenue to develop the circular economy and the sustainable energy industry, which would be very important in terms of both the resource recovery and the environmental protection. Copyright © 2017. Published by Elsevier Ltd.

ANALYSIS BENEFIT COST RATIO OF BIOCHAR IN AGRICULTURE LAND TO INCREASE INCOME HOUSEHOLD IN MERAUKE REGENCY

Directory of Open Access Journals (Sweden)

Maria Magdalena Diana Widiastuti

2016-08-01

Full Text Available Biochar has been proven to increase the availability of soil nutrient, yield productivity and farmers income. Biochar can be made from forestry/agricultural waste and do not required high technology. The objective of this study were: (1 to analyze Benefit Cost Ratio (BCR of biochar made from rice husk, (2 to compare yield productivity of paddy with biochar treatment, and (3 to analyze of paddy farming system with biochar treatment. The methodology by using BCR and productivity approach. The result showed that, firstly, the BCR of biochar from rice husks was 1.35 which indicated that biochar productivity as feasible. Secondly, the provision of biochar and fertilizer on agricultural could increase rice productivity of 4.2 ton/ha (control treatment to 5.5 ton/ha (treatment biochar + organic fertilizer and 6 ton/ha (treatment biochar + organic fertilizer + chemical fertilizers. Thirdly, the benefit cost ratio of paddy farming system for control treatment (1.54, higher than biochar+organic fertilizer treatment (1.46 and biochar+organic fertilizer+chemical fertilizer treatment.

Estimation of methane and nitrous oxide emission from paddy fields and uplands during 1990-2000 in Taiwan

International Nuclear Information System (INIS)

Shangshyng Yang; Chungming Liu; Yenlan Liu; Chaoming Lai

2003-01-01

To investigate the greenhouse gases emissions from paddy fields and uplands, methane and nitrous oxide emissions were estimated from local measurement and the IPCC guidelines during 1990-2000 in Taiwan. Annual methane emission from 182 807 to 242 298 ha of paddy field in the first crop season ranged from 8062 to 12 066 ton, and it was between 16 261 and 25 007 ton for 144 178-211 968 ha in the second crop season with local measurement. The value ranged from 12 132 to 17 465 ton, and from 16 046 to 24 762 ton of methane in the first and second crop season with the IPCC guidelines for multiple aeration treatments, respectively. Annual nitrous oxide emission was between 472 and 670 ton and between 236 and 359 ton in the first and second crop season, respectively. Methane and nitrous oxide emissions from uplands depend on crop, growth season, fertilizer application and environmental conditions. Annual methane emission from upland crops, vegetable, fruit, ornamental plants, forage crops and green manure crops was 138-252, 412-460, 97-100, 3-5, 4-5 and 3-51 ton, respectively. Annual nitrous oxide emission was 1080-1976, 1784-1994, 2540-2622, 31-54, 43-53 and 38-582 ton, respectively. Annual nitrous oxide emission ranged from 91 to 132 ton for 77 593-112 095 ton of nitrogen-fixing crops, from 991 to 1859 ton for 325 9731-6 183 441 ton of non-nitrogen-fixing crops, and from 1.77 to 2.22 Gg for 921 169-1 172 594 ton of chemical fertilizer application. In addition, rice hull burning emitted 19.3-24.2 ton of methane and 17.2-21.5 ton of nitrous oxide, and corn stalk burning emitted 2.1-4.2 ton of methane and 1.9-3.8 ton of nitrous oxide. Methane emission from the agriculture sector was 26 421-37 914 ton, and nitrous oxide emission was 9810-11 649 ton during 1990-2000 in Taiwan. Intermittent irrigation in paddy fields reduces significantly methane emission; appropriate application of nitrogen fertilization and irrigation in uplands and paddy fields also decreases nitrous oxide

Effect of Cu content on wear resistance and mechanical behavior of Ti-Cu binary alloys

Science.gov (United States)

Yu, Feifei; Wang, Hefeng; Yuan, Guozheng; Shu, Xuefeng

2017-04-01

Arc melting with nonconsumable tungsten electrode and water-cooled copper crucible was used to fabricate Ti-Cu binary alloys with different Cu contents in an argon atmosphere. The compositions and phase structures of the fabricated alloys were investigated by glow discharge optical emission spectroscopy (GDOES) and X-ray diffraction (XRD). Nanoindentation tests through continuous stiffness measurement were then performed at room temperature to analyze the mechanical behaviors of the alloys. Results indicated that the composition of each Ti-Cu binary alloy was Ti(100- x) Cu x ( x = 43, 60, 69, and 74 at.%). The XRD analysis results showed that the alloys were composed of different phases, indicating that different Cu contents led to the variations in alloy hardness. The wear tests results revealed that elemental Cu positively affects the wear resistance properties of the Ti-Cu alloys. Nanoindentation testing results showed that the moduli of the Ti-Cu alloys were minimally changed at increasing Cu content, whereas their hardness evidently increased according to the wear test results.

Synthesis of nano-hydroxyapatite (nHA) from waste mussel shells using a rapid microwave method

Energy Technology Data Exchange (ETDEWEB)

Shavandi, Amin, E-mail: amin.shavandi@postgrad.otago.ac.nz [Department of Food Sciences, University of Otago, Dunedin (New Zealand); Bekhit, Alaa El-Din A. [Department of Food Sciences, University of Otago, Dunedin (New Zealand); Ali, Azam [Department of Applied Sciences, University of Otago, Dunedin (New Zealand); Sun, Zhifa [Department of Physics, University of Otago, Dunedin (New Zealand)

2015-01-15

Nano-crystalline hydroxyapatite (HA, Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}) was produced from waste mussel shells using a rapid microwave irradiation method. Mussel shells were converted to rod like nano-crystalline HA particles of 30–70 nm long using 0.1 M EDTA as a chelating agent for 30 min after an appropriate pre-treatment and an irradiation step in a microwave with a power of 1.1 kW. The produced HA was characterised using X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), thermo gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and inductively coupled plasma mass spectrometry (ICP-MS) to determine the morphology, particle size, crystal phases, elemental composition and thermal behaviour. Furthermore, to benchmark the synthesized HA obtained from mussel shells, it was compared with a commercially pure HA (Sigma–Aldrich). The thermal analysis showed that the synthesized HA has remarkable heat stability at 1000 °C, and the XRD and FTIR results showed a high purity of the synthesized HA powders. Compared to the conventional hydrothermal treatment, microwave-assisted method has the advantages of an increased rate of HA formation. The obtained HA have potential engineering applications as materials for bone-tissues. - Highlights: • Waste mussel shells were successfully converted to nano sized hydroxyapatite. • Microwave-assisted technique accelerated the conversion process. • The physicochemical properties of the produced hydroxyapatite are reported. • The prepared hydroxyapatite has nano sized particles of less than 100 nm.

Evaluation of nanohydroxyapaptite (nano-HA) coated epigallocatechin-3-gallate (EGCG) cross-linked collagen membranes.

Science.gov (United States)

Chu, Chenyu; Deng, Jia; Man, Yi; Qu, Yili

2017-09-01

Collagen is the main component of extracellular matrix (ECM) with desirable biological activities and low antigenicity. Collagen materials have been widely utilized in guided bone regeneration (GBR) surgery due to its abilities to maintain space for hard tissue growth. However, pure collagen lacks optimal mechanical properties. In our previous study, epigallocatechin-3-gallate (EGCG) cross-linked collagen membranes, with better biological activities and enhanced mechanical properties, may promote osteoblast proliferation, but their effect on osteoblast differentiation is not very significant. Nanohydroxyapatite (nano-HA) is the main component of mineral bone, which possesses exceptional bioactivity properties including good biocompatibility, high osteoconductivity and osteoinductivity, non-immunogenicity and non-inflammatory behavior. Herein, by analyzing the physical and chemical properties as well as the effects on promoting bone regeneration, we have attempted to present a novel EGCG-modified collagen membrane with nano-HA coating, and have found evidence that the novel collagen membrane may promote bone regeneration with a better surface morphology, without destroying collagen backbone. To evaluate the surface morphologies, chemical and mechanical properties of pure collagen membranes, epigallocatechin-3-gallate (EGCG) cross-linked collagen membranes, nano-HA coated collagen membranes, nano-HA coated EGCG-collagen membranes, (ii) to evaluate the bone regeneration promoted by theses membranes. In the present study, collagen membranes were divided into 4 groups: (1) untreated collagen membranes (2) EGCG cross-linked collagen membranes (3) nano-HA modified collagen membranes (4) nano-HA modified EGCG-collagen membranes. Scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to evaluate surface morphologies and chemical properties, respectively. Mechanical properties were determined by differential scanning calorimeter (DSC

CuAlO2 and CuAl2O4 thin films obtained by stacking Cu and Al films using physical vapor deposition

Science.gov (United States)

Castillo-Hernández, G.; Mayén-Hernández, S.; Castaño-Tostado, E.; DeMoure-Flores, F.; Campos-González, E.; Martínez-Alonso, C.; Santos-Cruz, J.

2018-06-01

CuAlO2 and CuAl2O4 thin films were synthesized by the deposition of the precursor metals using the physical vapor deposition technique and subsequent annealing. Annealing was carried out for 4-6 h in open and nitrogen atmospheres respectively at temperatures of 900-1000 °C with control of heating and cooling ramps. The band gap measurements ranged from 3.3 to 4.5 eV. Electrical properties were measured using the van der Pauw technique. The preferred orientations of CuAlO2 and CuAl2O4 were found to be along the (1 1 2) and (3 1 1) planes, respectively. The phase percentages were quantified using a Rietveld refinement simulation and the energy dispersive X-ray spectroscopy indicated that the composition is very close to the stoichiometry of CuAlO2 samples and with excess of aluminum and deficiency of copper for CuAl2O4 respectively. High resolution transmission electron microscopy identified the principal planes in CuAlO2 and in CuAl2O4. Higher purities were achieved in nitrogen atmosphere with the control of the cooling ramps.

Soil loss estimation using geographic information system in enfraz watershed for soil conservation planning in highlands of Ethiopia

Directory of Open Access Journals (Sweden)

Gizachew Tiruneh

2015-12-01

Full Text Available Accelerated soil erosion is a worldwide problem because of its economic and environmental impacts. Enfraz watershed is one of the most erosion-prone watersheds in the highlands of Ethiopia, which received little attention. This study was, therefore, carried out to spatially predict the soil loss rate of the watershed with a Geographic Information System (GIS and Remote Sensing (RS. Revised Universal Soil Loss Equation (RUSLE adapted to Ethiopian conditions was used to estimate potential soil losses by utilizing information on rainfall erosivity (R using interpolation of rainfall data, soil erodibility (K using soil map, vegetation cover (C using satellite images, topography (LS using Digital Elevation Model (DEM and conservation practices (P using satellite images. Based on the analysis, about 92.31% (5914.34 ha of the watershed was categorized none to slight class which under soil loss tolerance (SLT values ranging from 5 to 11 tons ha-1 year-1. The remaining 7.68% (492.21 ha of land was classified under moderate to high class about several times the maximum tolerable soil loss. The total and an average amount of soil loss estimated by RUSLE from the watershed was 30,836.41 ton year-1 and 4.81 tons ha-1year-1, respectively.

Thermal gravimetric analysis of the CsCuCl3, Cs2CuCl4 and Cs2CuCl4x2H2O crystals

International Nuclear Information System (INIS)

Soboleva, L.V.; Vasil'eva, M.G.

1977-01-01

The thermal characteristics of crystals of Cs 2 CuCl 4 , Cs 2 CuCl 4 x2H 2 O, and CsCuCl 3 were investigated thermogravimetrically. The derivatogram of the Cs 2 CuCl 4 crystal is characterized by the presence of a single endothermal effect at 505 deg C. The derivatogram of the Cs 2 CuCl 4 x2H 2 O crystal contains three endothermal effects: at 40, 135, and 480 deg C. The derivatogram of the CsCuCl 3 crystal shows the presence of two endothermal effects at 142 and 455 deg C. The thermogravimetric data on Cs 2 CuCl 4 and CsCuCl 3 crystals reveal crystal decomposition on melting; hence, these crystals cannot be grown from melts

Stark broadening in the laser-induced Cu I and Cu II spectra

International Nuclear Information System (INIS)

Skočić, M; Burger, M; Nikolić, Z; Bukvić, S; Djeniže, S

2013-01-01

In this work we present the Stark widths (W) of 22 neutral (Cu I) and 100 singly ionized (Cu II) copper spectral lines that have been measured at 18 400 K and 19 300 K electron temperatures and 6.3 × 10  22 m −3 and 2.1 × 10  23 m −3 electron densities, respectively. The experiment is conducted in the laser-induced plasma—the Nd:YAG laser, operating at 532 nm, was used to produce plasma from the copper sample in the residual air atmosphere at a pressure of 8 Pa. The electron temperature and density were estimated by the Boltzmann-plot method and from the Saha equation. The investigated Cu I lines belong to the 4s–4p′, 4s  2 –4p″ and 4p′–4d′ transitions while Cu II spectral lines belong to the 4s–4p, 4p–5s, 4p–4d, 4p–4s  2 , 4d–4f and 4d–v transitions. Comparison with existing experimental data was possible only in the case of 17 Cu II lines due to a lack of experimental and theoretical values. The rest of the data, Stark widths of 22 Cu I and 83 Cu II lines are published for the first time. (paper)

Growth and magnetic properties dependence of the Co–Cu/Cu films electrodeposited under high magnetic fields

Energy Technology Data Exchange (ETDEWEB)

Franczak, Agnieszka, E-mail: agnieszka.franczak@mtm.kuleuven.be [Laboratoire d’Ingénierie et Sciences des Matériaux (LISM EA 4695), Université de Reims Champagne-Ardenne, UFR Sciences et Naturelles, Bat. 6, Moulin de la Housse, BP 1039, 51687 Reims Cedex 2 (France); Department of Materials Science (MTM), KU Leuven, Kasteelpark Arenberg 44, 3001 Haverlee (Leuven) (Belgium); Levesque, Alexandra [Laboratoire d’Ingénierie et Sciences des Matériaux (LISM EA 4695), Université de Reims Champagne-Ardenne, UFR Sciences et Naturelles, Bat. 6, Moulin de la Housse, BP 1039, 51687 Reims Cedex 2 (France); Zabinski, Piotr [Laboratory of Physical Chemistry and Electrochemistry, Faculty of Non-Ferrous Metals, AGH University of Science and Technology, al. A. Mickiewicza 30, 30059 Krakow (Poland); Li, Donggang [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, 314 Box, 110004 Shenyang (China); Czapkiewicz, Maciej [Department of Electronics, AGH University of Science and Technology, al. A. Mickiewicza 30, 30059 Krakow (Poland); Kowalik, Remigiusz [Laboratory of Physical Chemistry and Electrochemistry, Faculty of Non-Ferrous Metals, AGH University of Science and Technology, al. A. Mickiewicza 30, 30059 Krakow (Poland); Bohr, Frédéric [Laboratoire d’Ingénierie et Sciences des Matériaux (LISM EA 4695), Université de Reims Champagne-Ardenne, UFR Sciences et Naturelles, Bat. 6, Moulin de la Housse, BP 1039, 51687 Reims Cedex 2 (France); and others

2015-07-15

The present work is focused on the investigations of magnetic properties dependence on microstructure of Co–Cu/Cu films electrodeposited under superimposed high magnetic field. The experimental results indicate a strong effect of an external magnetic field on the morphology of deposited films, more precisely on the Co:Cu ratio that determines the film growth. It is shown that the Co–Cu/Cu films electrodeposited without superimposed magnetic field consisted of two clearly visible features: compact film with incorporated granular particles. Under a superimposed external high magnetic field the privilege growth of the particles was induced. As a consequence, development of the well-defined branched structure of Co–Cu/Cu film was observed. In contrary, the phase compositional investigations do not reveal any changes in the phase formation during electrodeposition under magnetic field conditions. Thus, it is assumed that a strong growth of Co–Cu/Cu films in (111) direction under magnetic or non-magnetic electrodeposition conditions is related with the growth of Cu (111) plane and embedded into it some of the Co fcc atoms of same (111) orientation, as well as the Co hcp atoms that grows in the (002) direction. This non-equilibrium growth of Co–Cu/Cu films under magnetic deposition conditions affects strongly the magnetic properties of deposited films, revealing that films obtained under magnetic fields higher than 3 T were no more magnetic materials. - Highlights: • Co–Cu/Cu electrodeposits were obtained at elevated temperature under HMFs. • The effects of HMFs on microstructure and magnetic properties were investigated. • Interesting morphological changes due to HMFs has been observed. • Changes in Co:Cu ratio due to HMFs modified the magnetic properties of deposits.

Growth and magnetic properties dependence of the Co–Cu/Cu films electrodeposited under high magnetic fields

International Nuclear Information System (INIS)

Franczak, Agnieszka; Levesque, Alexandra; Zabinski, Piotr; Li, Donggang; Czapkiewicz, Maciej; Kowalik, Remigiusz; Bohr, Frédéric

2015-01-01

The present work is focused on the investigations of magnetic properties dependence on microstructure of Co–Cu/Cu films electrodeposited under superimposed high magnetic field. The experimental results indicate a strong effect of an external magnetic field on the morphology of deposited films, more precisely on the Co:Cu ratio that determines the film growth. It is shown that the Co–Cu/Cu films electrodeposited without superimposed magnetic field consisted of two clearly visible features: compact film with incorporated granular particles. Under a superimposed external high magnetic field the privilege growth of the particles was induced. As a consequence, development of the well-defined branched structure of Co–Cu/Cu film was observed. In contrary, the phase compositional investigations do not reveal any changes in the phase formation during electrodeposition under magnetic field conditions. Thus, it is assumed that a strong growth of Co–Cu/Cu films in (111) direction under magnetic or non-magnetic electrodeposition conditions is related with the growth of Cu (111) plane and embedded into it some of the Co fcc atoms of same (111) orientation, as well as the Co hcp atoms that grows in the (002) direction. This non-equilibrium growth of Co–Cu/Cu films under magnetic deposition conditions affects strongly the magnetic properties of deposited films, revealing that films obtained under magnetic fields higher than 3 T were no more magnetic materials. - Highlights: • Co–Cu/Cu electrodeposits were obtained at elevated temperature under HMFs. • The effects of HMFs on microstructure and magnetic properties were investigated. • Interesting morphological changes due to HMFs has been observed. • Changes in Co:Cu ratio due to HMFs modified the magnetic properties of deposits

Effects of Cu content on the photoelectrochemistry of Cu2ZnSnS4 nanocrystal thin films

International Nuclear Information System (INIS)

Khoshmashrab, Saghar; Turnbull, Matthew J.; Vaccarello, Daniel; Nie, Yuting; Martin, Spencer; Love, David A.; Lau, Po K.; Sun, Xuhui; Ding, Zhifeng

2015-01-01

Highlights: • Two compositions of CZTS were synthesized, one yielding Cu-poor and the other Cu-stoichiometric nanocrystals (NCs). • Physical and electronic properties of both films were probed using various analytical techniques. • Films comprised of Cu-poor CZTS showed tighter packing with less defects compared to those of stoichiometric-Cu. • Photoelectrochemical measurements exhibited increased photoconversion and increased photostability of the Cu-poor films. • Intensity modulated photocurrent spectroscopy showed that the Cu-deficient NCs had half the recombination rate as that of stoichiometric-Cu films. - Abstract: Cu 2 ZnSnS 4 (CZTS) nanocrystals (NCs) were prepared via a one-pot solvothermal method. Given that the composition affects the electronic properties of this p-type semiconductor, two compositional ratios were chosen from 10 designed and synthesized analogues, one yielding Cu-poor and the other Cu-stoichiometric CZTS. NCs in which the Cu concentration was slightly below stoichiometric yielded more uniform films with greater photovoltaic performance. The lower Cu content also lead to slightly better crystallinity within the film, as demonstrated by XRD, Raman spectroscopy and transmission electron microscopy. Chronophotoelectrochemical measurements indicated that both types of NC films displayed good stability; however, with a decrease in potential, an increase in resistance for the Cu-stoichiometric film was observed. As determined by intensity modulated photocurrent spectroscopy, the product separation rate of the photoinduced holes and electrons in the Cu-poor films were more than 3 times that of the Cu-stoichiometric, confirming that the lower Cu content led to an improved photoperformance

Investigation of Surface Pre-Treatment Methods for Wafer-Level Cu-Cu Thermo-Compression Bonding

Directory of Open Access Journals (Sweden)

Koki Tanaka

2016-12-01

Full Text Available To increase the yield of the wafer-level Cu-Cu thermo-compression bonding method, certain surface pre-treatment methods for Cu are studied which can be exposed to the atmosphere before bonding. To inhibit re-oxidation under atmospheric conditions, the reduced pure Cu surface is treated by H2/Ar plasma, NH3 plasma and thiol solution, respectively, and is covered by Cu hydride, Cu nitride and a self-assembled monolayer (SAM accordingly. A pair of the treated wafers is then bonded by the thermo-compression bonding method, and evaluated by the tensile test. Results show that the bond strengths of the wafers treated by NH3 plasma and SAM are not sufficient due to the remaining surface protection layers such as Cu nitride and SAMs resulting from the pre-treatment. In contrast, the H2/Ar plasma–treated wafer showed the same strength as the one with formic acid vapor treatment, even when exposed to the atmosphere for 30 min. In the thermal desorption spectroscopy (TDS measurement of the H2/Ar plasma–treated Cu sample, the total number of the detected H2 was 3.1 times more than the citric acid–treated one. Results of the TDS measurement indicate that the modified Cu surface is terminated by chemisorbed hydrogen atoms, which leads to high bonding strength.

Enhancement in visible light photocatalytic activity by embedding Cu nanoparticles over CuS/MCM-41 nanocomposite

Science.gov (United States)

Sohrabnezhad, Sh.; Karamzadeh, M.

2017-07-01

This article indicate the biogenic synthesis of copper nanoparticles (Cu NPs) using the borage flowers extract of Borago officinalis over CuS/MCM-41 nanocomposite (NC). No external reducing was utilized in the developed method. The CuS-MCM-41 NC was used as stabilizing agent. The synthesis of CuS nanostructure in MCM-41 material has been realized by hydrothermal method. Their physiochemical properties have been characterized by X-ray diffraction, transmission electron microscopy (TEM), UV-Visible diffuse reflectance spectroscopy, and Fourier transform infrared spectroscopy. On the basis of TEM images, a layer of Cu NPs has been located over CuS/MCM-41 NC with average diameter of 60-80 nm. The results revealed the spherical nature of the prepared Cu NPs with diameter less than 10 nm. The DR spectra of Cu NPs in MCM-41 and CuS-MCM-41 NCs showed surface plasmon resonance bands at 570 and 500-600 nm, respectively. The photocatalytic activity was evaluated under visible light irradiation using the photocatalytic degradation of methylene blue (MB) as a model reaction. The prepared Cu/CuS/MCM-41 nanocomposite microspheres showed higher photodegradation ability for MB than CuS/MCM-41. The degradation of MB achieved up to 80% after 60 min and the nanocomposite could be recycled and reused.

Estimation of carbon emission from peatland fires using Landsat-8 OLI imagery in Siak District, Riau Province

Science.gov (United States)

Aisyah Fadhillah Hafni, Dinda; Syaufina, Lailan; Puspaningsih, Nining; Prasasti, Indah

2018-05-01

The study was conducted in three land cover conditions (secondary peat forest, shrub land, and palm plantation) that were burned in the Siak District, Riau Province, Indonesia year 2015. Measurement and calculation carbon emission from soil and vegetation of peatland should be done accurately to be implemented on climate change mitigation or greenhouse gases mitigation. The objective of the study was to estimate the carbon emission caused peatland fires in the Siak District, Riau Province, Indonesia year 2015. Estimated carbon emissions were performed using visual method and digital method. The visual method was a method that uses on-screen digitization assisted by hotspot data, the presence of smoke, and fire suppression data. The digital method was a method that uses the Normalized Burn Ratio (NBR) index. The estimated carbon emissions were calculated using the equation that was developed from IPCC 2006 in Verified Carbon Standard 2015. The results showed that the estimation of carbon emissions from fires from above the peat soil surface were higher than the carbon emissions from the peat soil. Carbon emissions above the peat soil surface of 1376.51 ton C/ha were obtained by visual method while 3984.33 ton C/ha were obtained by digital method. Peatland carbon emissions of 6.6 x 10-4 ton C/ha were obtained by visual method, whereas 2.84 x 10-3 ton C/ha was obtained by digital method. Visual method and digital method using remote sensing must be combined and developed in order to carbon emission values will be more accurate.

Growth and characterization of NixCu1-x alloy films, NixCu1-x/NiyCu1-y multilayers, and nanowires

International Nuclear Information System (INIS)

Kazeminezhad, I.

2001-12-01

It was found that it is possible to grow Ni x Cu 1-x alloy systems of arbitrary composition by electrodepositing well-defined sub-monolayer quantities of Ni and Cu in alternation using a new method based on that used previously to prepare potentiostatically deposited magnetic multilayers from a single sulphamate-based electrolyte. Following growth, the chemical composition of Ni x Cu 1-x alloy films was obtained by ZAF-corrected energy dispersive X-Ray (EDX) analysis and less than a 4% difference between the nominal and actual composition was observed. The structure of the films was investigated by high-angle X-ray diffractometry (HAXRD) and transmission electron microscopy (TEM). The films grown on polycrystalline Cu substrates had (100) texture, while those grown on Au-coated glass had (111) texture. Some evidence of Ni clustering was obtained by vibrating sample magnetometry (VSM). Self-organisation of the deposited metal was suggested for Ni potentials more positive than ∼-1.4V. The transition from a Ni/Cu multilayer to a Ni x Cu 1-x alloy was also studied and an interesting aspect, namely a plateau region in a plot of magnetisation as a function of Ni layer thickness was observed, suggesting a preferred Ni cluster size in these alloy films. Anisotropic magnetoresistance (AMR) of the films decreased with increasing Cu content at 300K and 77K. SQUID measurements for Ni 0.52 Cu 0.48 and Ni 0.62 CU 0.38 films showed that they become much more strongly ferromagnetic at low temperatures. Evidence for blocked -superparamagnetic behaviour above a blocking temperature (T B ) of the films was obtained from zero-field-cooled (ZFC) and field-cooled (FC) magnetic susceptibility measurements. Ni x Cu 1-x /Ni y Cu 1-y alloy/alloy multilayer films with short repeat distance were successfully fabricated using this method. Up to third order satellite peaks observed in HAXRD showed that the interface is sharp. Room temperature longitudinal magnetoresistance measurements showed

Los Cuícatl de Acomiztli Netzahualcóyotl: entre el ritual y la estética del pueblo Nahual

Directory of Open Access Journals (Sweden)

Carlos Daniel Ortiz Caraballo

2016-01-01

Full Text Available Este artículo muestra el aspecto literario de uno de las culturas más desarrolladas del México antiguo: el pueblo azteca - náhuatl. Para este caso, se consideran los Cuícatl de Acomiztli (1402-1469. Su objetivo es develar los temas que sustentan la lírica de este príncipe de la cultura azteca - náhuatl. Para ello, se ha considerado una interpretación de los escritos desde la antropología literaria, que entiende el texto como fragmento de una cultura, por lo que el centro del análisis lo constituye el sujeto creador y su interacción con el entorno. De esa forma, se parte de conceptos, tales como: cultura náhuatl, cuícatl y visión de mundo religiosa, entre otros. Con ello, se busca exteriorizar, tanto el mensaje de libertad y esperanza que plasmó el cuicapicqui (forjador de cantos prehispánico en sus Cuícatl, como la contribución del pueblo azteca náhuatl a las letras latinoamericanas.

Treatment of reverse osmosis (RO) concentrate by the combined Fe/Cu/air and Fenton process (1stFe/Cu/air-Fenton-2ndFe/Cu/air).

Science.gov (United States)

Ren, Yi; Yuan, Yue; Lai, Bo; Zhou, Yuexi; Wang, Juling

2016-01-25

To decompose or transform the toxic and refractory reverse osmosis (RO) concentrate and improve the biodegradability, 1stFe/Cu/air-Fenton-2ndFe/Cu/air were developed to treat RO concentrate obtained from an amino acid production plant in northern China. First, their operating conditions were optimized thoroughly. Furthermore, 5 control experiments were setup to confirm the superiority of 1stFe/Cu/air-Fenton-2ndFe/Cu/air and synergistic reaction between Fe/Cu/air and Fenton. The results suggest that the developed method could obtain high COD removal (65.1%) and BOD5/COD ratio (0.26) due to the synergistic reaction between Fe/Cu/air and Fenton. Under the optimal conditions, the influent and effluent of 1stFe/Cu/air-Fenton-2ndFe/Cu/air and 5 control experiments were analyzed by using UV, FTIR, EEM and LC, which confirm the superiority of 1stFe/Cu/air-Fenton-2ndFe/Cu/air. Therefore, the developed method in this study is a promising process for treatment of RO concentrate. Copyright © 2015 Elsevier B.V. All rights reserved.

Magnetic dipole moments of 58Cu and 59Cu by in-source laser spectroscopy

International Nuclear Information System (INIS)

Stone, N. J.; Koester, U.; Stone, J. Rikovska; Fedorov, D. V.; Fedoseyev, V. N.; Flanagan, K. T.; Hass, M.; Lakshmi, S.

2008-01-01

Online measurements of the magnetic dipole moments and isotope shifts of 58 Cu and 59 Cu by the in-source laser spectroscopy method are reported. The results for the magnetic moments are μ ( 58 Cu) =+0.52(8) μ N ,μ( 59 Cu) =+1.84(3) μ N and for the isotope shifts δν 59,65 =1.72(22) GHz and δν 58,65 =1.99(30) GHz in the transition from the 3d 10 4s 2 S 1/2 ground state to the 3d 10 4p 2 P 1/2 state in Cu I. The magnetic moment of 58 Cu is discussed in the context of the strength of the subshell closure at 56 Ni, additivity rules and large-scale shell model calculations

Hume-Rothery electron concentration rule across a whole solid solution range in a series of gamma-brasses in Cu-Zn, Cu-Cd, Cu-Al, Cu-Ga, Ni-Zn and Co-Zn alloy systems

Science.gov (United States)

Mizutani, U.; Noritake, T.; Ohsuna, T.; Takeuchi, T.

2010-05-01

The aim of the present work is to examine if the Hume-Rothery stabilisation mechanism holds across whole solid solution ranges in a series of gamma-brasses with especial attention to the role of vacancies introduced into the large unit cell. The concentration dependence of the number of atoms in the unit cell, N, for gamma-brasses in the Cu-Zn, Cu-Cd, Cu-Al, Cu-Ga, Ni-Zn and Co-Zn alloy systems was determined by measuring the density and lattice constants at room temperature. The number of itinerant electrons in the unit cell, e/uc, is evaluated by taking a product of N and the number of itinerant electrons per atom, e/a, for the transition metal element deduced earlier from the full-potential linearised augmented plane wave (FLAPW)-Fourier analysis. The results are discussed within the rigid-band model using as a host the density of states (DOS) derived earlier from the FLAPW band calculations for the stoichiometric gamma-brasses Cu5Zn8, Cu9Al4 and TM2Zn11 (TM = Co and Ni). A solid solution range of gamma-brasses in Cu-Zn, Cu-Cd, Cu-Al, Cu-Ga and Ni-Zn alloy systems is found to fall inside the existing pseudogap at the Fermi level. This is taken as confirmation of the validity of the Hume-Rothery stability mechanism for a whole solute concentration range of these gamma-brasses. An exception to this behaviour was found in the Co-Zn gamma-brasses, where orbital hybridisation effects are claimed to play a crucial role in stabilisation.

PCL-HA microscaffolds for in vitro modular bone tissue engineering.

Science.gov (United States)

Totaro, Alessandra; Salerno, Aurelio; Imparato, Giorgia; Domingo, Concepción; Urciuolo, Francesco; Netti, Paolo Antonio

2017-06-01

The evolution of microscaffolds and bone-bioactive surfaces is a pivotal point in modular bone tissue engineering. In this study, the design and fabrication of porous polycaprolactone (PCL) microscaffolds functionalized with hydroxyapatite (HA) nanoparticles by means of a bio-safe and versatile thermally-induced phase separation process is reported. The ability of the as-prepared nanocomposite microscaffolds to support the adhesion, growth and osteogenic differentiation of human mesenchymal stem cells (hMSCs) in standard and osteogenic media and using dynamic seeding/culture conditions was investigated. The obtained results demonstrated that the PCL-HA nanocomposite microparticles had an enhanced interaction with hMSCs and induced their osteogenic differentiation, even without the exogenous addition of osteogenic factors. In particular, calcium deposition, alizarin red assay, histological analysis, osteogenic gene expression and collagen I secretion were assessed. The results of these tests demonstrated the formation of bone microtissue precursors after 28 days of dynamic culture. These findings suggest that PCL-HA nanocomposite microparticles represent an excellent platform for in vitro modular bone tissue engineering. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Cu-capped surface alloys of Pt/Cu left brace 100 right brace

CERN Document Server

Alshamaileh, E; Wander, A

2003-01-01

The room-temperature deposition of 0.5 monolayer (ML) Pt on Cu left brace 100 right brace followed by annealing to 525 K results in a sharp c(2 x 2) low-energy electron diffraction (LEED) pattern. The structure of this surface alloy is investigated by means of symmetrized automated tensor low-energy electron diffraction (SATLEED) analysis and ab initio plane wave density functional calculations. The results are then compared with those for the similar system 0.5 ML Pd/Cu left brace 100 right brace. SATLEED results for the Pt/Cu left brace 100 right brace show that it consists of an ordered c(2 x 2) Cu-Pt second layer alloy capped with a pure Cu first layer. The first and second interlayer spacings are found to be expanded by +5.1 +- 1.7 and +3.5 +- 1.7% respectively (relative to the bulk Cu interlayer spacing of 1.807 A) due to the insertion of the 8% larger Pt atoms into the second layer. The ordered mixed layer is found to be rippled by 0.08 +- 0.06 A with Pt atoms rippled outwards towards the solid-vacuum ...

2016 Billion-Ton Report: Environmental Sustainability Effects of Select Scenarios from Volume 1 (Volume 2)

Energy Technology Data Exchange (ETDEWEB)

Efroymson, R. A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Langholtz, M. H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Johnson, K. E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stokes, B. J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-01-13

On behalf of all the authors and contributors, it is a great privilege to present the 2016 Billion-Ton Report (BT16), volume 2: Environmental Sustainability Effects of Select Scenarios from volume 1. This report represents the culmination of several years of collaborative effort among national laboratories, government agencies, academic institutions, and industry. BT16 was developed to support the U.S. Department of Energy’s efforts towards national goals of energy security and associated quality of life.

Crystallization and preliminary X-ray analysis of the HA3 component of Clostridium botulinum type C progenitor toxin

Energy Technology Data Exchange (ETDEWEB)

Nakamura, Toshio; Tonozuka, Takashi; Kotani, Mao; Obata, Kanae [Department of Applied Biological Science, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu-shi, Tokyo 183-8509 (Japan); Oguma, Keiji [Okayama University Graduate School of Medicine, Dentistry and Pharmaceutical Sciences, 2-5-1 Shikata-cho, Okayama 700-8558 (Japan); Nishikawa, Atsushi, E-mail: nishikaw@cc.tuat.ac.jp [Department of Applied Biological Science, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu-shi, Tokyo 183-8509 (Japan); CREST, Japan Science and Technology Agency (Japan)

2007-12-01

HA3, a 70 kDa haemagglutinating protein, is a precursor form of HA3a and HA3b, the subcomponents of Clostridium botulinum type C 16S progenitor toxin. In this report, recombinant HA3 protein was overexpressed in Escherichia coli, purified and crystallized. HA3, a 70 kDa haemagglutinating protein, is a precursor form of HA3a and HA3b, the subcomponents of Clostridium botulinum type C 16S progenitor toxin. In this report, recombinant HA3 protein was overexpressed in Escherichia coli, purified and crystallized. Diffraction data were collected to 2.6 Å resolution and the crystal belonged to the hexagonal space group P6{sub 3}. Matthews coefficient and self-rotation function calculations indicate that there is probably one molecule of HA3 in the asymmetric unit. A search for heavy-atom derivatives has been undertaken.

Demonstration and evaluation of the 20-ton-capacity load-cell-based weighing system, Eldorado Resources, Ltd., Port Hope, Ontario, September 3-4, 1986

International Nuclear Information System (INIS)

Cooley, J.N.; Huxford, T.J.

1986-01-01

On September 3 and 4, 1986, the prototype 20-ton-capacity load-cell-based weighing system (LCBWS) developed by the US Enrichment Safeguards Program (ESP) at Martin Marietta Energy Systems, Inc., was field tested at the Eldorado Resources, Ltd., (ERL) facility in Port Hope, Ontario. The 20-ton-capacity LCBWS has been designed and fabricated for use by the International Atomic Energy Agency (IAEA) for verifying the masses of large-capacity UF 6 cylinders during IAEA safeguards inspections at UF 6 handling facilities. The purpose of the Canadian field test was to demonstrate and to evaluate with IAEA inspectorates and with UF 6 bulk handling facility operators at Eldorado the principles, procedures, and hardware associated with using the 20-ton-capacity LCBWS as a portable means for verifying the masses of 10- and 14-ton UF 6 cylinders. Session participants included representatives from the IAEA, Martin Marietta Energy Systems, Inc., Eldorado Resources, Ltd., the Atomic Energy Control Board (AECB), and the International Safeguards Project Office (ISPO) at Brookhaven National Laboratory (BNL). Appendix A presents the list of participants and their organization affiliation. The two-day field test involved a formal briefing by ESP staff, two cylinder weighing sessions, IAEA critiques of the LCBWS hardware and software, and concluding discussions on the field performance of the system. Appendix B cites the meeting agenda. Summarized in this report are (1) the technical information presented by the system developers, (2) results from the weighing sessions, and (3) observations, suggestions, and concluding statements from meeting participants

Calculation of Gibbs energy of Zr-Al-Ni, Zr-Al-Cu, Al-Ni-Cu and Zr-Al-Ni-Cu liquid alloys based on quasiregular solution model

International Nuclear Information System (INIS)

Li, H.Q.; Yang, Y.S.; Tong, W.H.; Wang, Z.Y.

2007-01-01

With the effects of electronic structure and atomic size being introduced, the mixing enthalpy as well as the Gibbs energy of the ternary Zr-Al-Cu, Ni-Al-Cu, Zr-Ni-Al and quaternary Zr-Al-Ni-Cu systems are calculated based on quasiregular solution model. The computed results agree well with the experimental data. The sequence of Gibbs energies of different systems is: G Zr-Al-Ni-Cu Zr-Al-Ni Zr-Al-Cu Cu-Al-Ni . To Zr-Al-Cu, Ni-Al-Cu and Zr-Ni-Al, the lowest Gibbs energy locates in the composition range of X Zr 0.39-0.61, X Al = 0.38-0.61; X Ni = 0.39-0.61, X Al = 0.38-0.60 and X Zr = 0.32-0.67, X Al = 0.32-0.66, respectively. And to the Zr-Ni-Al-Cu system with 66.67% Zr, the lowest Gibbs energy is obtained in the region of X Al = 0.63-0.80, X Ni = 0.14-0.24

Studies of the development and characterization of the Cu-Ni-Pt and Cu-Ni-Sn alloys for electro-electronic uses; Estudos do desenvolvimento e caracterizacao das ligas Cu-Ni-Pt e Cu-Ni-Sn para fins eletro-eletronicos

Energy Technology Data Exchange (ETDEWEB)

Silva, Luis Carlos Elias da

2006-07-01

The Cu and its alloys have different applications in the owed modern society the excellent electric properties, thermal conductivity, resistance to the corrosion and other properties. These applications can be in valves, pipes, pots for absorption of solar energy, radiators for automobiles, current driver, electronic driver, thermostats elements and structural parts of nuclear reactors, as, for example, reels for field toroidal for a reactor of nuclear coalition. The alloys used in nuclear reactors, we can highlight Cu-Be, Cu-Sn and Cu-Pt. Ni and Co frequently are added to the Cu alloys so that the solubility is moved for temperatures more elevated with relationship to the binary systems of Cu-Sn and Cu-Pt. The addition of Ni-Pt or Ni-Sn to the Cu in the same or inferior percentages to 1,5% plus thermomechanical treatments changes the properties of the copper. We studied the electric conductivity and hardness Vickers of the Cu-Ni-Pt and Cu-Ni-Sn and compared with the electrolytic Cu. In the proposed flowcharts, breaking of the obtaining of the ingot, we proceeded with thermo mechanical treatments. (author)

The Effects of Different Nitrogen Sources on Yield and Yield Components of Sweet Corn (Zea mays L. saccharata

Directory of Open Access Journals (Sweden)

ali mojab ghasroddashti

2017-09-01

Full Text Available Introduction Sweet corn (Zea mays L. saccharata is one of the tropical cereals of graminae which is cultivated in order to use for ear. Nitrogen is one of the most important nutrients and key factors to achieve desirable yield. Fertilizers play a major role in crop productivity. However, nowadays, excessive use of fertilizers have been found to have a negative impact on yield and environment. Introducing new management methods based on nitrogen and water use efficiency showed some improvements in the quality and quantity of crop production in association with the health of the community. In fact, soil organic matter content should be maintained in the appropriate level to improve fertility. Using municipal solid waste compost and poultry manure are appropriate solutions. They can increase soil organic matter, modify physicochemical properties and improve crop production. Moreover, they are able to solve problems caused by the accumulation of municipal solid waste compost and poultry manure. Material and Methods In order to investigate the impact of different sources of nitrogen on yield and yield components of sweet corn, a field experiment was conducted as a randomized complete block design with three replications in Marvdasht in 2013. Treatments included different resources of fertilizer: 200 kg.ha-1 net nitrogen (T1, 300 kg.ha-1 net nitrogen (T2, 8 ton.ha-1 poultry manure (T3, 24 ton.ha-1 municipal solid waste compost (T4, 150 kg net nitrogen + 2 ton municipal solid waste compost (T5, 100 kg net nitrogen + 4 ton poultry manure (T6, 150 kg net nitrogen + 6 ton municipal solid waste compost (T7, 100 kg.ha-1 net nitrogen + 12 ton municipal solid waste compost (T8 and fertilizer free (control (T9. At the time of crop maturity, two square meters from middle of each plot were harvested to measure yield and yield components. Statistical analysis was performed using the SAS statistical software. Least significant difference (LSD test at the five

ALP gene expression in cDNA samples from bone tissue engineering using a HA/TCP/Chitosan scaffold

Science.gov (United States)

Stephanie, N.; Katarina, H.; Amir, L. R.; Gunawan, H. A.

2017-08-01

This study examined the potential use of hydroxyapatite (HA)/tricalcium phosphate (TCP)/Chitosan as a bone tissue engineering scaffold. The potential for using HA/TCP/chitosan as a scaffold was analyzed by measuring expression of the ALP osteogenic gene in cDNA from bone biopsies from four Macaque nemestrina. Experimental conditions included control (untreated), treatment with HA/TCP 70:30, HA/TCP 50:50, and HA/TCP/chitosan. cDNA samples were measured quantitively with Real-Time PCR (qPCR) and semi-quantitively by gel electrophoresis. There were no significant differences in ALP gene expression between treatment subjects after two weeks, but the HA/TCP/chitosan treatment gave the highest level of expression after four weeks. The scaffold using the HA/TCP/chitosan combination induced a higher level of expression of the osteogenic gene ALP than did scaffold without chitosan.

Radiolabeling and biodistribution of 62Cu-dithiocarbamate

International Nuclear Information System (INIS)

Matsumoto, Kazuya; Fujibayashi, Yasuhisa; Yokoyama, Akira; Konishi, Junji.

1990-01-01

The newly developed 62 Zn/ 62 Cu generator system has made available the production of the short-lived 62 Cu (T 1/2 = 9.8 min) positron radionuclide, eluted as 62 Cu-glycine. In the search for 62 Cu labeled radiopharmaceuticals for positron CT (PET) brain diagnostic studies, two ligands N,N-diethyl- and N,N-dimethyl-dithiocarbamic acid (DDC and DmDC) were selected, based on their Cu chelating abilities and the neutral lipophilic character of their copper chelates. In the present work, an in vitro study with non-radioactive Cu-glycine showed that both ligands easily formed the stable, neutral Cu-DDC and Cu-DmDC chelates (1:2 metal-ligand complexes) based on the ligand exchange reaction. Then the 62 Zn/ 62 Cu generator eluate, the 62 Cu-glycine was used for the radiolabeling of DDC and DmDC. The following HPLC analysis revealed that the ligand exchange reaction proceeded rapidly; the radiochemical purities of 62 Cu-DDC and 62 Cu-DmDC were extremely high (non-detectable 62 Cu-glycine) and both chelates were more lipophilic than 62 Cu-glycine. The mouse biodistribution of both radiolabeled compounds, 62 Cu-DDC and 62 Cu-DmDC indicated a brain accumlation of 2.8 and 5.3 times higher than 62 Cu-glycine, 15 min post injection, respectively. The brain accumulation observed with both 62 Cu-DDC and 62 Cu-DmDC might be due to their stable, neutral and lipophilic character; the latter enhanced by the presence of the methylated side chains. The gathered results indicated the applicability of dithiocarbamic acid derivatives in the production of new 62 Cu-labeled compounds using the 62 Zn/ 62 Cu generator system based on the ligand exchange reaction with 62 Cu-glycine eluate. Further studies with Cu-dithiocarbamic acid derivatives for development of new generator-produced 62 Cu positron radiopharmaceuticals can be recalled. (author)

Influence of Cu Content on the Microstructure and Mechanical Properties of Cr-Cu-N Coatings

Directory of Open Access Journals (Sweden)

Ji Cheng Ding

2018-01-01

Full Text Available The Cr-Cu-N coatings with various Cu contents (0–25.18 (±0.17 at.% were deposited on Si wafer and stainless steel (SUS 304 substrates in reactive Ar+N2 gas mixture by a hybrid coating system combining pulsed DC and RF magnetron sputtering techniques. The influence of Cu content on the coating composition, microstructure, and mechanical properties was investigated. The microstructure of the coatings was significantly altered by the introduction of Cu. The deposited coatings exhibit solid solution structure with different compositions in all of the samples. Addition of Cu is intensively favored for preferred orientation growth along (200 direction by restricting in (111 direction. With increasing Cu content, the surface and cross-sectional morphology of coatings were changed from triangle cone-shaped, columnar feature to broccoli-like and compact glassy microstructure, respectively. The mechanical properties including the residual stress, nanohardness, and toughness of the coatings were explored on the basis of Cu content. The highest hardness was obtained at the Cu content of 1.49 (±0.10 at.%.

Oxidative Stress Posttranslationally Regulates the Expression of Ha-Ras and Ki-Ras in Cultured Astrocytes

Directory of Open Access Journals (Sweden)

Samantha Messina

2012-01-01

Full Text Available Addition of hydrogen peroxide to cultured astrocytes induced a rapid and transient increase in the expression of Ha-Ras and Ki-Ras. Pull-down experiments with the GTP-Ras-binding domain of Raf-1 showed that oxidative stress substantially increased the activation of Ha-Ras, whereas a putative farnesylated activated form of Ki-Ras was only slightly increased. The increase in both Ha-Ras and Ki-Ras was insensitive to the protein synthesis inhibitor, cycloheximide, and was occluded by the proteasomal inhibitor, MG-132. In addition, exposure to hydrogen peroxide reduced the levels of ubiquitinated Ras protein, indicating that oxidative stress leads to a reduced degradation of both isoforms through the ubiquitin/proteasome pathway. Indeed, the late reduction in Ha-Ras and Ki-Ras was due to a recovery of proteasomal degradation because it was sensitive to MG-132. The late reduction of Ha-Ras levels was abrogated by compound PD98059, which inhibits the MAP kinase pathway, whereas the late reduction of Ki-Ras was unaffected by PD98059. We conclude that oxidative stress differentially regulates the expression of Ha-Ras and Ki-Ras in cultured astrocytes, and that activation of the MAP kinase pathway by oxidative stress itself or by additional factors may act as a fail-safe mechanism limiting a sustained expression of the potentially detrimental Ha-Ras.

Una contribución al estudio de la solubilidad del CuSO₄∙5H₂O en medio acuoso

Directory of Open Access Journals (Sweden)

de Juan, D.

1999-02-01

Full Text Available Pentahydrate copper sulphate (Blue vitriol is a copper salt used in minerallurgy as activator reagent in concentration methods by flotation for sulphide ores. In this work, crystallization conditions of copper sulphate solutions have been determined as a function of both temperature and sulphuric acidity. The results obtained showed that Cu²⁺ concentration in the solution is mainly a direct function of the logarithm of temperature and the sulfuric acid concentration. The influence of Zn²⁺ presence in copper sulphate solubility has been also studied at ambient temperature. Results obtained led to a multiple linear regression between Cu²⁺ concentration in the solution and sulphuric acid and Zn²⁺ concentrations in the medium. Finally, a comparison between the results obtained and data available in the literature is made.

El sulfato de cobre pentahidratado (vitriolo azul, vitriolo de Venus, caparrosa azul es una sal de cobre que se suele emplear en mineralurgia como reactivo activador en los métodos de concentración por flotación de los minerales sulfurados. En el presente trabajo se han determinado las condiciones de cristalización de las disoluciones de sulfato de cobre a distintas temperaturas en función de la acidez sulfúrica presente. Se ha encontrado que la concentración de Cu²⁺ en la disolución, es principalmente función directa del logaritmo de la temperatura y de la concentración de ácido sulfúrico presente. También se ha estudiado la influencia de la presencia del ion Zn²⁺ en la solubilidad del CuSO₄∙5H₂O a temperatura ambiente, hallándose una relación lineal múltiple entre la concentración de Cu²⁺ y las concentraciones de ácido sulfúrico y Zn²⁺ en la disolución. Por último, se realiza una comparación de los resultados obtenidos con los datos disponibles en la bibliografía.

The use of acetone to enhance the infiltration of HA nanoparticles into a demineralized dentin collagen matrix.

Science.gov (United States)

Besinis, Alexandros; van Noort, Richard; Martin, Nicolas

2016-03-01

This study investigates the role of acetone, as a carrier for nano-hydroxyapatite (nano-HA) in solution, to enhance the infiltration of fully demineralized dentin with HA nanoparticles (NPs). Dentin specimens were fully demineralized and subsequently infiltrated with two types of water-based nano-HA solutions (one containing acetone and one without). Characterization of the dentin surfaces and nano-HA particles was performed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface wettability and infiltration capacity of the nano-HA solutions were quantified by means of contact angle measurements and energy dispersive X-ray spectroscopy (EDS), respectively. Contact angle measurements were taken at baseline and repeated at regular intervals to assess the effect of acetone. The P and Ca levels of infiltrated dentin specimens were measured and compared to sound dentin and non-infiltrated controls. The presence of acetone resulted in an eight-fold decrease in the contact angles of the nano-HA solutions recorded on the surface of demineralized dentin compared to nano-HA solutions without acetone (one-way ANOVA, pacetone. Infiltration of demineralized dentin with the nano-HA solution containing acetone restored the lost mineral content by 50%, whereas the mean mineralization values for P and Ca in dentin treated with the acetone-free nano-HA solution were less than 6%. Acetone was shown to act as a vehicle to enhance the capacity to infiltrate demineralized dentin with HA NPs. The successful infiltration of dentin collagen with HA NPs provides a suitable scaffold, whereby the infiltrated HA NPs have the potential to act as seeds that may initiate heterogenous mineral growth when exposed to an appropriate mineral-rich environment. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

/Cu-Al System

Science.gov (United States)

Kish, Orel; Froumin, Natalya; Aizenshtein, Michael; Frage, Nachum

2014-05-01

Wettability and interfacial interaction of the Ta2O5/Cu-Al system were studied. Pure Cu does not wet the Ta2O5 substrate, and improved spreading is achieved when relatively a high fraction of the active element (~40 at.% Al) was added. The Al2O3 and AlTaO4 phases were observed at the Ta2O5/Cu-Al interface. A thermodynamic evaluation allowed us to suggest that the lack of wetting bellow 40 at.% Al is due to the presence of a native oxide, which covers the drop. The conditions of the native oxide decomposition and the formation of the volatile Al2O suboxide strongly depend on the vacuum level during sessile drop experiments and the composition of the Cu-Al alloy. In our case, Al contents greater than 40% provides thermodynamic conditions for the formation of Al2O (as a result of Al reaction with Al2O3) and the drop spreading. It was suggested that the final contact angle in the Ta2O5/Cu-Al system (50°) is determined by Ta adsorption on the newly formed alumina interlayer.

Corrosion and runoff rates of Cu and three Cu-alloys in marine environments with increasing chloride deposition rate.

Science.gov (United States)

Odnevall Wallinder, Inger; Zhang, Xian; Goidanich, Sara; Le Bozec, Nathalie; Herting, Gunilla; Leygraf, Christofer

2014-02-15

Bare copper sheet and three commercial Cu-based alloys, Cu15Zn, Cu4Sn and Cu5Al5Zn, have been exposed to four test sites in Brest, France, with strongly varying chloride deposition rates. The corrosion rates of all four materials decrease continuously with distance from the coast, i.e. with decreasing chloride load, and in the following order: Cu4Sn>Cu sheet>Cu15Zn>Cu5Al5Zn. The patina on all materials was composed of two main layers, Cu2O as the inner layer and Cu2(OH)3Cl as the outer layer, and with a discontinuous presence of CuCl in between. Additional minor patina constituents are SnO2 (Cu4Sn), Zn5(OH)6(CO3)2 (Cu15Zn and Cu5Al5Zn) and Zn6Al2(OH)16CO3·4H2O/Zn2Al(OH)6Cl·2H2O/Zn5Cl2(OH)8·H2O and Al2O3 (Cu5Al5Zn). The observed Zn- and Zn/Al-containing corrosion products might be important factors for the lower sensitivity of Cu15Zn and Cu5Al5Zn against chloride-induced atmospheric corrosion compared with Cu sheet and Cu4Sn. Decreasing corrosion rates with exposure time were observed for all materials and chloride loads and attributed to an improved adherence with time of the outer patina to the underlying inner oxide. Flaking of the outer patina layer was mainly observed on Cu4Sn and Cu sheet and associated with the gradual transformation of CuCl to Cu2(OH)3Cl of larger volume. After three years only Cu5Al5Zn remains lustrous because of a patina compared with the other materials that appeared brownish-reddish. Significantly lower release rates of metals compared with corresponding corrosion rates were observed for all materials. Very similar release rates of copper from all four materials were observed during the fifth year of marine exposure due to an outer surface patina that with time revealed similar constituents and solubility properties. Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

Ha-DEF1, a sunflower defensin, induces cell death in Orobanche parasitic plants.

Science.gov (United States)

de Zélicourt, Axel; Letousey, Patricia; Thoiron, Séverine; Campion, Claire; Simoneau, Philippe; Elmorjani, Khalil; Marion, Didier; Simier, Philippe; Delavault, Philippe

2007-08-01

Plant defensins are small basic peptides of 5-10 kDa and most of them exhibit antifungal activity. In a sunflower resistant to broomrape, among the three defensin encoding cDNA identified, SF18, SD2 and HaDef1, only HaDef1 presented a preferential root expression pattern and was induced upon infection by the root parasitic plant Orobanche cumana. The amino acid sequence deduced from HaDef1 coding sequence was composed of an endoplasmic reticulum signal sequence of 28 amino acids, a standard defensin domain of 50 amino-acid residues and an unusual C-terminal domain of 30 amino acids with a net positive charge. A 5.8 kDa recombinant mature Ha-DEF1 corresponding to the defensin domain was produced in Escherichia coli and was purified by means of a two-step chromatography procedure, Immobilized Metal Affinity Chromatography (IMAC) and Ion Exchange Chromatography. Investigation of in vitro antifungal activity of Ha-DEF1 showed a strong inhibition on Saccharomyces cerevisiae growth linked to a membrane permeabilization, and a morphogenetic activity on Alternaria brassicicola germ tube development, as already reported for some other plant defensins. Bioassays also revealed that Ha-DEF1 rapidly induced browning symptoms at the radicle apex of Orobanche seedlings but not of another parasitic plant, Striga hermonthica, nor of Arabidopsis thaliana. FDA vital staining showed that these browning areas corresponded to dead cells. These results demonstrate for the first time a lethal effect of defensins on plant cells. The potent mode of action of defensin in Orobanche cell death and the possible involvement in sunflower resistance are discussed.

Solid phase selective separation and preconcentration of Cu(II) by Cu(II)-imprinted polymethacrylic microbeads.

Science.gov (United States)

Dakova, Ivanka; Karadjova, Irina; Ivanov, Ivo; Georgieva, Ventsislava; Evtimova, Bisera; Georgiev, George

2007-02-12

Ion-imprinted polymer (IIP) particles are prepared by copolymerization of methacrylic acid as monomer, trimethylolpropane trimethacrylate as crosslinking agent and 2,2'-azo-bis-isobutyronitrile as initiator in the presence of Cu(II), a Cu(II)-4-(2-pyridylazo)resorcinol (Cu(II)-PAR) complex, and PAR only. A batch procedure is used for the determination of the characteristics of the Cu(II) solid phase extraction from the IIP produced. The results obtained show that the Cu(II)-PAR IIP has the greatest adsorption capacity (37.4 micromol g(-1) of dry copolymer) among the IIPs investigated. The optimal pH value for the quantitative preconcentration is 7, and full desorption is achieved by 1 M HNO(3). The selectivity coefficients (S(Cu/Me)) for Me=Ni(II), Co(II) are 45.0 and 38.5, respectively. It is established that Cu(II)-PAR IIPs can be used repeatedly without a considerable adsorption capacity loss. The determination of Cu(II) ions in seawater shows that the interfering matrix does not influence the preconcentration and selectivity values of the Cu(II)-PAR IIPs. The detection and quantification limits are 0.001 micromol L(-1) (3sigma) and 0.003 micromol L(-1) (6sigma), respectively.

Designing, preparing and evaluation of novel HA/Ti composite coating for endodontic dental implant

Directory of Open Access Journals (Sweden)

Fathi MH.

2002-08-01

Full Text Available Nowadays, application of implants as a new method for replacing extracted teeth have been improved. So, many researches have been performed for improving the characteristics of implants. The aim of this study was to design and produce a desired coating in order to obtaining two goals including; improvement of the corrosion behavior of metallic endodontic implant and the bone osseointegration simultaneously. Stainless steel 316L (SS, cobalt-chromium alloy (Vit and commercial pure titanium (cpTi were chosen as metallic substrates and hydroxyapatite coating (HAC were performed by plasma-spraying (PS process on three different substrates. A novel double layer Hydroxyapatite/Titanium (HA/Ti composite coating composed of a HA top layer and a Ti under layer was prepared using PS and physical vapor deposition (PVD process respectively on SS. Structural characterization techniques including XRD, SEM and EDX were utilized to investigate the microstructure, morpholgy and crystallinity of the coatings. Electrochemical potentiodynamic tests were performed in physiological solutions in order to determine and compare the corrosion behavior of the coated and uncoated specimens behavior as an indication of biocmpatibility. Results indicated that the cpTi possesses the highest and SS the lowest corrosion resistance (highest corrosion current density between uncoated substrates. This trend was independent to the type of physiological environment. The HA coating decreased the corrosion current density of HA coated metallic implants but did not change that trend. HAC acted as a mechanical barrier on the metallic substrate but could not prevent the interaction between metallic substrate and environment completely. The HA/Ti composite coating improved the corrosion behavior of SS. The corrosion current density of HA/Ti coated SS decreased and was exactly similar to single HA coated cpTi in physiological solutions. The results indicated that HA/Ti composite coated SS

Sequence diversity within the HA-1 gene as detected by melting temperature assay without oligonucleotide probes

Directory of Open Access Journals (Sweden)

Mattiuz Pier

2005-10-01

Full Text Available Abstract Background The minor histocompatibility antigens (mHags are self-peptides derived from common cellular proteins and presented by MHC class I and II molecules. Disparities in mHags are a potential risk for the development of graft-versus-host disease (GvHD in the recipients of bone marrow from HLA-identical donors. Two alleles have been identified in the mHag HA-1. The correlation between mismatches of the mHag HA-1 and GvHD has been suggested and methods to facilitate large-scale testing were afterwards developed. Methods We used sequence specific primer (SSP PCR and direct sequencing to detect HA-1 gene polymorphisms in a sample of 131 unrelated Italian subjects. We then set up a novel melting temperature (Tm assay that may help identification of HA-1 alleles without oligonucleotide probes. Results We report the frequencies of HA-1 alleles in the Italian population and the presence of an intronic 5 base-pair deletion associated with the immunogeneic allele HA-1H. We also detected novel variable sites with respect to the consensus sequence of HA-1 locus. Even though recombination/gene conversion events are documented, there is considerable linkage disequilibrium in the data. The gametic associations between HA-1R/H alleles and the intronic 5-bp ins/del polymorphism prompted us to try the Tm analysis with SYBR® Green I. We show that the addition of dimethylsulfoxide (DMSO during the assay yields distinct patterns when amplicons from HA-1H homozygotes, HA-1R homozygotes, and heterozygotes are analysed. Conclusion The possibility to use SYBR® Green I to detect Tm differences between allelic variants is attractive but requires great caution. We succeeded in allele discrimination of the HA-1 locus using a relatively short (101 bp amplicon, only in the presence of DMSO. We believe that, at least in certain assets, Tm assays may benefit by the addition of DMSO or other agents affecting DNA strand conformation and stability.

Microstructure and mechanical properties of plasma sprayed HA/YSZ/Ti-6Al-4V composite coatings.

Science.gov (United States)

Khor, K A; Gu, Y W; Pan, D; Cheang, P

2004-08-01

Plasma sprayed hydroxyapatite (HA) coatings on titanium alloy substrate have been used extensively due to their excellent biocompatibility and osteoconductivity. However, the erratic bond strength between HA and Ti alloy has raised concern over the long-term reliability of the implant. In this paper, HA/yttria stabilized zirconia (YSZ)/Ti-6Al-4V composite coatings that possess superior mechanical properties to conventional plasma sprayed HA coatings were developed. Ti-6Al-4V powders coated with fine YSZ and HA particles were prepared through a unique ceramic slurry mixing method. The so-formed composite powder was employed as feedstock for plasma spraying of the HA/YSZ/Ti-6Al-4V coatings. The influence of net plasma energy, plasma spray standoff distance, and post-spray heat treatment on microstructure, phase composition and mechanical properties were investigated. Results showed that coatings prepared with the optimum plasma sprayed condition showed a well-defined splat structure. HA/YSZ/Ti-6Al-4V solid solution was formed during plasma spraying which was beneficial for the improvement of mechanical properties. There was no evidence of Ti oxidation from the successful processing of YSZ and HA coated Ti-6Al-4V composite powders. Small amount of CaO apart from HA, ZrO(2) and Ti was present in the composite coatings. The microhardness, Young's modulus, fracture toughness, and bond strength increased significantly with the addition of YSZ. Post-spray heat treatment at 600 degrees C and 700 degrees C for up to 12h was found to further improve the mechanical properties of coatings. After the post-spray heat treatment, 17.6% increment in Young's modulus (E) and 16.3% increment in Vicker's hardness were achieved. The strengthening mechanisms of HA/YSZ/Ti-6Al-4V composite coatings were related to the dispersion strengthening by homogeneous distribution of YSZ particles in the matrix, the good mechanical properties of Ti-6Al-4V and the formation of solid solution among HA

Calefaccion centralizada por biomasa, Cuéllar

Directory of Open Access Journals (Sweden)

Verdú Pérez, Jesús

2001-10-01

Full Text Available A plant of municipal central heating feeded with residual biomass, has been created in Cuéllar (Segovia, Spain, in order to demostrate its technical viability and to make more confortable the life of village inhabitants. Those residual biomass used as combustible, comes from the pine seeds, the key industry in the area. The calorific energy generated by combustion of those pine seeds, serves to heat the water to be send later through different pipes crossing the village. So, heating services and sanitary hot water are used according to the moment of the year. The study of the operative plant, allow us to discern the more adecuated operation parameters. reaching a total thermical yield of 60%. So its technical and economical viability concerning other traditional combustibles, its big environmental contribution to the production of energy, in addition to the social advantages -1ike the creation of new working jobs and the development of alternative activities in agricultura1 and forest areas- have contributed to present this plant as a model to be extended to other areas with potential biomass.Con el fin de demostrar su viabilidad técnica y económica y dar servicio a los habitantes de la localidad, se ha instalado en Cuéllar (Segovia, España, una planta de calefacción municipal alimentada con biomasa residual. Como combustible utiliza los residuos biomásicos procedentes de la industria piñonera de la zona. La energía calorífica generada por el proceso de combustión de éstos, calienta agua que es distribuida a través de un circuito de tuberías aisladas a través de la ciudad. Se proporcionan así los servicios de calefacción y agua caliente sanitaria según la época del año. El estudio de la operación de la planta, ha permitido caracterizar los parámetros de funcionamiento más adecuados. habiéndose obtenido un rendimiento térmico total de la instalación del 60%. quedando justificada su viabilidad técnica y econ

Coupled growth of Al-Al2Cu eutectics in Al-Cu-Ag alloys

International Nuclear Information System (INIS)

Hecht, U; Witusiewicz, V; Drevermann, A

2012-01-01

Coupled eutectic growth of Al and Al 2 Cu was investigated in univariant Al-Cu-Ag alloys during solidification with planar and cellular morphology. Experiments reveal the dynamic selection of small spacings, below the minimum undercooling spacing and show that distinct morphological features pertain to nearly isotropic or anisotropic Al-Al 2 Cu interfaces.

Bioaccumulation, toxicokinetics, and effects of copper from sediment spiked with aqueous Cu, nano-CuO, or micro-CuO in the deposit-feeding snail, Potamopyrgus antipodarum